3930 files changed, 309519 insertions, 96780 deletions

diff --git a/.gitignore b/.gitignore
index 51bd99d6a26..cecb3b040cc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,7 +3,7 @@
 # subdirectories here. Add them in the ".gitignore" file
 # in that subdirectory instead.
 #
-# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# NOTE! Please use 'git ls-files -i --exclude-standard'
 # command after changing this file, to see if there are
 # any tracked files which get ignored after the change.
 #
@@ -25,6 +25,8 @@
 *.elf
 *.bin
 *.gz
+*.lzma
+*.patch
 
 #
 # Top-level generic files
@@ -62,6 +64,12 @@ series
 cscope.*
 ncscope.*
 
+# gnu global files
+GPATH
+GRTAGS
+GSYMS
+GTAGS
+
 *.orig
 *~
 \#*#
diff --git a/CREDITS b/CREDITS
index 2520ba620ff..2b88fb37ad5 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1253,6 +1253,10 @@ S: 8124 Constitution Apt. 7
 S: Sterling Heights, Michigan 48313
 S: USA
 
+N: Wolfgang Grandegger
+E: wg@grandegger.com
+D: Controller Area Network (device drivers)
+
 N: William Greathouse
 E: wgreathouse@smva.com
 E: wgreathouse@myfavoritei.com
diff --git a/Documentation/Changes b/Documentation/Changes
index b95082be4d5..664392481c8 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -29,7 +29,7 @@ hardware, for example, you probably needn't concern yourself with
 isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
-o  Gnu make               3.79.1                  # make --version
+o  Gnu make               3.80                    # make --version
 o  binutils               2.12                    # ld -v
 o  util-linux             2.10o                   # fdformat --version
 o  module-init-tools      0.9.10                  # depmod -V
@@ -48,6 +48,7 @@ o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
 o  udev                   081                     # udevinfo -V
 o  grub                   0.93                    # grub --version
+o  mcelog		  0.6
 
 Kernel compilation
 ==================
@@ -61,7 +62,7 @@ computer.
 Make
 ----
 
-You will need Gnu make 3.79.1 or later to build the kernel.
+You will need Gnu make 3.80 or later to build the kernel.
 
 Binutils
 --------
@@ -276,6 +277,16 @@ before running exportfs or mountd.  It is recommended that all NFS
 services be protected from the internet-at-large by a firewall where
 that is possible.
 
+mcelog
+------
+
+In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
+as a regular cronjob similar to the x86-64 kernel to process and log
+machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
+events are errors reported by the CPU. Processing them is strongly encouraged.
+All x86-64 kernels since 2.6.4 require the mcelog utility to
+process machine checks.
+
 Getting updated software
 ========================
 
@@ -365,6 +376,10 @@ FUSE
 ----
 o <http://sourceforge.net/projects/fuse>
 
+mcelog
+------
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+
 Networking
 **********
 
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 72968cd5eaf..8bb37237ebd 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
 icache footprint for the CPU and simply because there is less memory
 available for the pagecache. Just think about it; a pagecache miss causes a
-disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles
-that can go into these 5 miliseconds.
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
 
 A reasonable rule of thumb is to not put inline at functions that have more
 than 3 lines of code in them. An exception to this rule are the cases where
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 25fb8bcf32a..5aceb88b3f8 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -676,8 +676,8 @@ this directory the following files can currently be found:
 	dma-api/all_errors	This file contains a numeric value. If this
 				value is not equal to zero the debugging code
 				will print a warning for every error it finds
-				into the kernel log. Be carefull with this
-				option. It can easily flood your logs.
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
 
 	dma-api/disabled	This read-only file contains the character 'Y'
 				if the debugging code is disabled. This can
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index fbeaffc1dcc..e3698666357 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -145,7 +145,6 @@ usage should require reading the full document.
         interface in STA mode at first!
       </para>
 !Finclude/net/mac80211.h ieee80211_if_init_conf
-!Finclude/net/mac80211.h ieee80211_if_conf
     </chapter>
 
     <chapter id="rx-tx">
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 6389dec3345..93cb28d05dc 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -118,7 +118,7 @@ to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
 the beginning. If the object was moved to the same chain,
-then the reader doesnt care : It might eventually
+then the reader doesn't care : It might eventually
 scan the list again without harm.
 
 
diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt
index 6fc65603592..561826f8209 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/SM501.txt
@@ -5,7 +5,7 @@ Copyright 2006, 2007 Simtec Electronics
 
 The Silicon Motion SM501 multimedia companion chip is a multifunction device
 which may provide numerous interfaces including USB host controller USB gadget,
-Asyncronous Serial ports, Audio functions and a dual display video interface.
+asynchronous serial ports, audio functions, and a dual display video interface.
 The device may be connected by PCI or local bus with varying functions enabled.
 
 Core
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index f309d3c6221..5c555a8b39e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -91,6 +91,10 @@ Be as specific as possible.  The WORST descriptions possible include
 things like "update driver X", "bug fix for driver X", or "this patch
 includes updates for subsystem X.  Please apply."
 
+The maintainer will thank you if you write your patch description in a
+form which can be easily pulled into Linux's source code management
+system, git, as a "commit log".  See #15, below.
+
 If your description starts to get long, that's a sign that you probably
 need to split up your patch.  See #3, next.
 
@@ -183,8 +187,9 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@kernel.org managed by Jesper Juhl; which collects "trivial"
-patches. Trivial patches must qualify for one of the following rules:
+trivial@kernel.org which collects "trivial" patches. Have a look
+into the MAINTAINERS file for its current manager.
+Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1)
  Warning fixes (cluttering with useless warnings is bad)
@@ -196,7 +201,6 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/juhl/trivial/>
 
 
 
@@ -405,7 +409,14 @@ person it names.  This tag documents that potentially interested parties
 have been included in the discussion
 
 
-14) Using Tested-by: and Reviewed-by:
+14) Using Reported-by:, Tested-by: and Reviewed-by:
+
+If this patch fixes a problem reported by somebody else, consider adding a
+Reported-by: tag to credit the reporter for their contribution.  Please
+note that this tag should not be added without the reporter's permission,
+especially if the problem was not reported in a public forum.  That said,
+if we diligently credit our bug reporters, they will, hopefully, be
+inspired to help us again in the future.
 
 A Tested-by: tag indicates that the patch has been successfully tested (in
 some environment) by the person named.  This tag informs maintainers that
@@ -444,7 +455,7 @@ offer a Reviewed-by tag for a patch.  This tag serves to give credit to
 reviewers and to inform maintainers of the degree of review which has been
 done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
 understand the subject area and to perform thorough reviews, will normally
-increase the liklihood of your patch getting into the kernel.
+increase the likelihood of your patch getting into the kernel.
 
 
 15) The canonical patch format
@@ -485,12 +496,33 @@ phrase" should not be a filename.  Do not use the same "summary
 phrase" for every patch in a whole patch series (where a "patch
 series" is an ordered sequence of multiple, related patches).
 
-Bear in mind that the "summary phrase" of your email becomes
-a globally-unique identifier for that patch.  It propagates
-all the way into the git changelog.  The "summary phrase" may
-later be used in developer discussions which refer to the patch.
-People will want to google for the "summary phrase" to read
-discussion regarding that patch.
+Bear in mind that the "summary phrase" of your email becomes a
+globally-unique identifier for that patch.  It propagates all the way
+into the git changelog.  The "summary phrase" may later be used in
+developer discussions which refer to the patch.  People will want to
+google for the "summary phrase" to read discussion regarding that
+patch.  It will also be the only thing that people may quickly see
+when, two or three months later, they are going through perhaps
+thousands of patches using tools such as "gitk" or "git log
+--oneline".
+
+For these reasons, the "summary" must be no more than 70-75
+characters, and it must describe both what the patch changes, as well
+as why the patch might be necessary.  It is challenging to be both
+succinct and descriptive, but that is what a well-written summary
+should do.
+
+The "summary phrase" may be prefixed by tags enclosed in square
+brackets: "Subject: [PATCH tag] <summary phrase>".  The tags are not
+considered part of the summary phrase, but describe how the patch
+should be treated.  Common tags might include a version descriptor if
+the multiple versions of the patch have been sent out in response to
+comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for
+comments.  If there are four patches in a patch series the individual
+patches may be numbered like this: 1/4, 2/4, 3/4, 4/4.  This assures
+that developers understand the order in which the patches should be
+applied and that they have reviewed or applied all of the patches in
+the patch series.
 
 A couple of example Subjects:
 
@@ -510,19 +542,31 @@ the patch author in the changelog.
 The explanation body will be committed to the permanent source
 changelog, so should make sense to a competent reader who has long
 since forgotten the immediate details of the discussion that might
-have led to this patch.
+have led to this patch.  Including symptoms of the failure which the
+patch addresses (kernel log messages, oops messages, etc.) is
+especially useful for people who might be searching the commit logs
+looking for the applicable patch.  If a patch fixes a compile failure,
+it may not be necessary to include _all_ of the compile failures; just
+enough that it is likely that someone searching for the patch can find
+it.  As in the "summary phrase", it is important to be both succinct as
+well as descriptive.
 
 The "---" marker line serves the essential purpose of marking for patch
 handling tools where the changelog message ends.
 
 One good use for the additional comments after the "---" marker is for
-a diffstat, to show what files have changed, and the number of inserted
-and deleted lines per file.  A diffstat is especially useful on bigger
-patches.  Other comments relevant only to the moment or the maintainer,
-not suitable for the permanent changelog, should also go here.
-Use diffstat options "-p 1 -w 70" so that filenames are listed from the
-top of the kernel source tree and don't use too much horizontal space
-(easily fit in 80 columns, maybe with some indentation).
+a diffstat, to show what files have changed, and the number of
+inserted and deleted lines per file.  A diffstat is especially useful
+on bigger patches.  Other comments relevant only to the moment or the
+maintainer, not suitable for the permanent changelog, should also go
+here.  A good example of such comments might be "patch changelogs"
+which describe what has changed between the v1 and v2 version of the
+patch.
+
+If you are going to include a diffstat after the "---" marker, please
+use diffstat options "-p 1 -w 70" so that filenames are listed from
+the top of the kernel source tree and don't use too much horizontal
+space (easily fit in 80 columns, maybe with some indentation).
 
 See more details on the proper patch format in the following
 references.
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc4b27..948c8718d96 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt
index 72576769e0f..2d82c80322c 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.txt
@@ -58,7 +58,7 @@ same criteria as reads.
 front_merges	(bool)
 ------------
 
-Sometimes it happens that a request enters the io scheduler that is contigious
+Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
 request, or it fits at the front. That is called either a back merge candidate
 or a front merge candidate. Due to the way files are typically laid out,
diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt
index 000b0fbdc10..d0d042c2fd5 100644
--- a/Documentation/braille-console.txt
+++ b/Documentation/braille-console.txt
@@ -27,7 +27,7 @@ parameter.
 
 For simplicity, only one braille console can be enabled, other uses of
 console=brl,... will be discarded.  Also note that it does not interfere with
-the console selection mecanism described in serial-console.txt
+the console selection mechanism described in serial-console.txt
 
 For now, only the VisioBraille device is supported.
 
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index c11b931f8f9..15174985ad0 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -76,9 +76,9 @@ Do the steps below to download the BIOS image.
 
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
-echo -1 > /sys/class/firmware/dell_rbu/loading.
+echo -1 > /sys/class/firmware/dell_rbu/loading
 Until this step is completed the driver cannot be unloaded.
-Also echoing either mono ,packet or init in to image_type will free up the
+Also echoing either mono, packet or init in to image_type will free up the
 memory allocated by the driver.
 
 If a user by accident executes steps 1 and 3 above without executing step 2;
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting
index dd48132a74d..f622c1e9f0f 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting
@@ -119,7 +119,7 @@ which takes quite a bit of time and thought after the "real work" has been
 done.  When done properly, though, it is time well spent.
 
 
-5.4: PATCH FORMATTING
+5.4: PATCH FORMATTING AND CHANGELOGS
 
 So now you have a perfect series of patches for posting, but the work is
 not done quite yet.  Each patch needs to be formatted into a message which
@@ -146,8 +146,33 @@ that end, each patch will be composed of the following:
  - One or more tag lines, with, at a minimum, one Signed-off-by: line from
    the author of the patch.  Tags will be described in more detail below.
 
-The above three items should, normally, be the text used when committing
-the change to a revision control system.  They are followed by:
+The items above, together, form the changelog for the patch.  Writing good
+changelogs is a crucial but often-neglected art; it's worth spending
+another moment discussing this issue.  When writing a changelog, you should
+bear in mind that a number of different people will be reading your words.
+These include subsystem maintainers and reviewers who need to decide
+whether the patch should be included, distributors and other maintainers
+trying to decide whether a patch should be backported to other kernels, bug
+hunters wondering whether the patch is responsible for a problem they are
+chasing, users who want to know how the kernel has changed, and more.  A
+good changelog conveys the needed information to all of these people in the
+most direct and concise way possible.
+
+To that end, the summary line should describe the effects of and motivation
+for the change as well as possible given the one-line constraint.  The
+detailed description can then amplify on those topics and provide any
+needed additional information.  If the patch fixes a bug, cite the commit
+which introduced the bug if possible.  If a problem is associated with
+specific log or compiler output, include that output to help others
+searching for a solution to the same problem.  If the change is meant to
+support other changes coming in later patch, say so.  If internal APIs are
+changed, detail those changes and how other developers should respond.  In
+general, the more you can put yourself into the shoes of everybody who will
+be reading your changelog, the better that changelog (and the kernel as a
+whole) will be.
+
+Needless to say, the changelog should be the text used when committing the
+change to a revision control system.  It will be followed by:
 
  - The patch itself, in the unified ("-u") patch format.  Using the "-p"
    option to diff will associate function names with changes, making the
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 387b8a720f4..d79aead9418 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -188,7 +188,7 @@ For example, you can do something like the following.
 
   void my_midlayer_destroy_something()
   {
-	devres_release_group(dev, my_midlayer_create_soemthing);
+	devres_release_group(dev, my_midlayer_create_something);
   }
 
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 8eda3fb6641..06f8f46692d 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'.
 The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
 for EDAC development, before it is sent upstream to kernel.org
 
-At the bluesmoke/EDAC project site, is a series of quilt patches against
-recent kernels, stored in a SVN respository. For easier downloading, there
+At the bluesmoke/EDAC project site is a series of quilt patches against
+recent kernels, stored in a SVN repository. For easier downloading, there
 is also a tarball snapshot available.
 
 ============================================================================
@@ -73,9 +73,9 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a pci device attribute located in sysfs that is
+In the kernel there is a PCI device attribute located in sysfs that is
 checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scannining is skipped for that device. The attribute
+PCI parity/error scanning is skipped for that device. The attribute
 is:
 
 	broken_parity_status
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
index c87bfe5c630..b994c3b1054 100644
--- a/Documentation/fb/sh7760fb.txt
+++ b/Documentation/fb/sh7760fb.txt
@@ -1,7 +1,7 @@
 SH7760/SH7763 integrated LCDC Framebuffer driver
 ================================================
 
-0. Overwiew
+0. Overview
 -----------
 The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
 supports (in theory) resolutions ranging from 1x1 to 1024x1024,
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index de491a3e231..7129846a278 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -437,3 +437,20 @@ Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
 	driver but this caused driver conflicts.
 Who:	Jean Delvare <khali@linux-fr.org>
 	Krzysztof Helt <krzysztof.h1@wp.pl>
+
+---------------------------
+
+What:	CONFIG_RFKILL_INPUT
+When:	2.6.33
+Why:	Should be implemented in userspace, policy daemon.
+Who:	Johannes Berg <johannes@sipsolutions.net>
+
+----------------------------
+
+What:	CONFIG_X86_OLD_MCE
+When:	2.6.32
+Why:	Remove the old legacy 32bit machine check code. This has been
+	superseded by the newer machine check code from the 64bit port,
+	but the old version has been kept around for easier testing. Note this
+	doesn't impact the old P5 and WinChip machine check handlers.
+Who:	Andi Kleen <andi@firstfloor.org>
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index c6341745df3..8f78ded4b64 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -369,7 +369,7 @@ The call requires an initialized struct autofs_dev_ioctl. There are two
 possible variations. Both use the path field set to the path of the mount
 point to check and the size field adjusted appropriately. One uses the
 ioctlfd field to identify a specific mount point to check while the other
-variation uses the path and optionaly arg1 set to an autofs mount type.
+variation uses the path and optionally arg1 set to an autofs mount type.
 The call returns 1 if this is a mount point and sets arg1 to the device
 number of the mount and field arg2 to the relevant super block magic
 number (described below) or 0 if it isn't a mountpoint. In both cases
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 4db125b3a5c..2666b1ed5e9 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -184,7 +184,7 @@ This has the following fields:
      have index children.
 
      If this function is not supplied or if it returns NULL then the first
-     cache in the parent's list will be chosed, or failing that, the first
+     cache in the parent's list will be chosen, or failing that, the first
      cache in the master list.
 
  (4) A function to retrieve an object's key from the netfs [mandatory].
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
new file mode 100644
index 00000000000..ed52af60c2d
--- /dev/null
+++ b/Documentation/filesystems/debugfs.txt
@@ -0,0 +1,158 @@
+Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+
+Debugfs exists as a simple way for kernel developers to make information
+available to user space.  Unlike /proc, which is only meant for information
+about a process, or sysfs, which has strict one-value-per-file rules,
+debugfs has no rules at all.  Developers can put any information they want
+there.  The debugfs filesystem is also intended to not serve as a stable
+ABI to user space; in theory, there are no stability constraints placed on
+files exported there.  The real world is not always so simple, though [1];
+even debugfs interfaces are best designed with the idea that they will need
+to be maintained forever.
+
+Debugfs is typically mounted with a command like:
+
+    mount -t debugfs none /sys/kernel/debug
+
+(Or an equivalent /etc/fstab line). 
+
+Note that the debugfs API is exported GPL-only to modules.
+
+Code using debugfs should include <linux/debugfs.h>.  Then, the first order
+of business will be to create at least one directory to hold a set of
+debugfs files:
+
+    struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
+
+This call, if successful, will make a directory called name underneath the
+indicated parent directory.  If parent is NULL, the directory will be
+created in the debugfs root.  On success, the return value is a struct
+dentry pointer which can be used to create files in the directory (and to
+clean it up at the end).  A NULL return value indicates that something went
+wrong.  If ERR_PTR(-ENODEV) is returned, that is an indication that the
+kernel has been built without debugfs support and none of the functions
+described below will work.
+
+The most general way to create a file within a debugfs directory is with:
+
+    struct dentry *debugfs_create_file(const char *name, mode_t mode,
+				       struct dentry *parent, void *data,
+				       const struct file_operations *fops);
+
+Here, name is the name of the file to create, mode describes the access
+permissions the file should have, parent indicates the directory which
+should hold the file, data will be stored in the i_private field of the
+resulting inode structure, and fops is a set of file operations which
+implement the file's behavior.  At a minimum, the read() and/or write()
+operations should be provided; others can be included as needed.  Again,
+the return value will be a dentry pointer to the created file, NULL for
+error, or ERR_PTR(-ENODEV) if debugfs support is missing.
+
+In a number of cases, the creation of a set of file operations is not
+actually necessary; the debugfs code provides a number of helper functions
+for simple situations.  Files containing a single integer value can be
+created with any of:
+
+    struct dentry *debugfs_create_u8(const char *name, mode_t mode,
+				     struct dentry *parent, u8 *value);
+    struct dentry *debugfs_create_u16(const char *name, mode_t mode,
+				      struct dentry *parent, u16 *value);
+    struct dentry *debugfs_create_u32(const char *name, mode_t mode,
+				      struct dentry *parent, u32 *value);
+    struct dentry *debugfs_create_u64(const char *name, mode_t mode,
+				      struct dentry *parent, u64 *value);
+
+These files support both reading and writing the given value; if a specific
+file should not be written to, simply set the mode bits accordingly.  The
+values in these files are in decimal; if hexadecimal is more appropriate,
+the following functions can be used instead:
+
+    struct dentry *debugfs_create_x8(const char *name, mode_t mode,
+				     struct dentry *parent, u8 *value);
+    struct dentry *debugfs_create_x16(const char *name, mode_t mode,
+				      struct dentry *parent, u16 *value);
+    struct dentry *debugfs_create_x32(const char *name, mode_t mode,
+				      struct dentry *parent, u32 *value);
+
+Note that there is no debugfs_create_x64().
+
+These functions are useful as long as the developer knows the size of the
+value to be exported.  Some types can have different widths on different
+architectures, though, complicating the situation somewhat.  There is a
+function meant to help out in one special case:
+
+    struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+				         struct dentry *parent, 
+					 size_t *value);
+
+As might be expected, this function will create a debugfs file to represent
+a variable of type size_t.
+
+Boolean values can be placed in debugfs with:
+
+    struct dentry *debugfs_create_bool(const char *name, mode_t mode,
+				       struct dentry *parent, u32 *value);
+
+A read on the resulting file will yield either Y (for non-zero values) or
+N, followed by a newline.  If written to, it will accept either upper- or
+lower-case values, or 1 or 0.  Any other input will be silently ignored.
+
+Finally, a block of arbitrary binary data can be exported with:
+
+    struct debugfs_blob_wrapper {
+	void *data;
+	unsigned long size;
+    };
+
+    struct dentry *debugfs_create_blob(const char *name, mode_t mode,
+				       struct dentry *parent,
+				       struct debugfs_blob_wrapper *blob);
+
+A read of this file will return the data pointed to by the
+debugfs_blob_wrapper structure.  Some drivers use "blobs" as a simple way
+to return several lines of (static) formatted text output.  This function
+can be used to export binary information, but there does not appear to be
+any code which does so in the mainline.  Note that all files created with
+debugfs_create_blob() are read-only.
+
+There are a couple of other directory-oriented helper functions:
+
+    struct dentry *debugfs_rename(struct dentry *old_dir, 
+    				  struct dentry *old_dentry,
+		                  struct dentry *new_dir, 
+				  const char *new_name);
+
+    struct dentry *debugfs_create_symlink(const char *name, 
+                                          struct dentry *parent,
+				      	  const char *target);
+
+A call to debugfs_rename() will give a new name to an existing debugfs
+file, possibly in a different directory.  The new_name must not exist prior
+to the call; the return value is old_dentry with updated information.
+Symbolic links can be created with debugfs_create_symlink().
+
+There is one important thing that all debugfs users must take into account:
+there is no automatic cleanup of any directories created in debugfs.  If a
+module is unloaded without explicitly removing debugfs entries, the result
+will be a lot of stale pointers and no end of highly antisocial behavior.
+So all debugfs users - at least those which can be built as modules - must
+be prepared to remove all files and directories they create there.  A file
+can be removed with:
+
+    void debugfs_remove(struct dentry *dentry);
+
+The dentry value can be NULL, in which case nothing will be removed.
+
+Once upon a time, debugfs users were required to remember the dentry
+pointer for every debugfs file they created so that all files could be
+cleaned up.  We live in more civilized times now, though, and debugfs users
+can call:
+
+    void debugfs_remove_recursive(struct dentry *dentry);
+
+If this function is passed a pointer for the dentry corresponding to the
+top-level directory, the entire hierarchy below that directory will be
+removed.
+
+Notes:
+	[1] http://lwn.net/Articles/309298/
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 97882df0486..608fdba97b7 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -294,7 +294,7 @@ max_batch_time=usec	Maximum amount of time ext4 should wait for
 			amount of time (on average) that it takes to
 			finish committing a transaction.  Call this time
 			the "commit time".  If the time that the
-			transactoin has been running is less than the
+			transaction has been running is less than the
 			commit time, ext4 will try sleeping for the
 			commit time to see if other operations will join
 			the transaction.   The commit time is capped by
@@ -328,7 +328,7 @@ noauto_da_alloc		replacing existing files via patterns such as
 			journal commit, in the default data=ordered
 			mode, the data blocks of the new file are forced
 			to disk before the rename() operation is
-			commited.  This provides roughly the same level
+			committed.  This provides roughly the same level
 			of guarantees as ext3, and avoids the
 			"zero-length" problem that can happen when a
 			system crashes before the delayed allocation
@@ -358,7 +358,7 @@ written to the journal first, and then to its final location.
 In the event of a crash, the journal can be replayed, bringing both data and
 metadata into a consistent state.  This mode is the slowest except when data
 needs to be read from and written to disk at the same time where it
-outperforms all others modes.  Curently ext4 does not have delayed
+outperforms all others modes.  Currently ext4 does not have delayed
 allocation support if this data journalling mode is selected.
 
 References
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 1e3defcfe50..606233cd461 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -204,7 +204,7 @@ fiemap_check_flags() helper:
 
 int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
 
-The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The
+The struct fieinfo should be passed in as received from ioctl_fiemap(). The
 set of fiemap flags which the fs understands should be passed via fs_flags. If
 fiemap_check_flags finds invalid user flags, it will place the bad values in
 fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from
diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt
index 85eaeaddd27..e386f7e4bce 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs-rdma.txt
@@ -100,7 +100,7 @@ Installation
     $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
 
     In this location, mount.nfs will be invoked automatically for NFS mounts
-    by the system mount commmand.
+    by the system mount command.
 
     NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
     on the NFS client machine. You do not need this specific version of
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index 55c4300abfc..01539f41067 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -39,9 +39,8 @@ Features which NILFS2 does not support yet:
 	- extended attributes
 	- POSIX ACLs
 	- quotas
-	- writable snapshots
-	- remote backup (CDP)
-	- data integrity
+	- fsck
+	- resize
 	- defragmentation
 
 Mount options
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ce84cfc9eae..cd8717a3627 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -366,7 +366,7 @@ just those considered 'most important'.  The new vectors are:
   RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
   sent from one CPU to another per the needs of the OS.  Typically,
   their statistics are used by kernel developers and interested users to
-  determine the occurance of interrupt of the given type.
+  determine the occurrence of interrupts of the given type.
 
 The above IRQ vectors are displayed only when relevent.  For example,
 the threshold vector does not exist on x86_64 platforms.  Others are
@@ -551,7 +551,7 @@ Committed_AS: The amount of memory presently allocated on the system.
               memory once that memory has been successfully allocated.
 VmallocTotal: total size of vmalloc memory area
  VmallocUsed: amount of vmalloc area which is used
-VmallocChunk: largest contigious block of vmalloc area which is free
+VmallocChunk: largest contiguous block of vmalloc area which is free
 
 ..............................................................................
 
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 26e4b8bc53e..85354b32d73 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -72,7 +72,7 @@ The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
 call, and disable it following the access by writing "0" to the file.  Note
-that the device must be enabled for a rom read to return data succesfully.
+that the device must be enabled for a rom read to return data successfully.
 In the event a driver is not bound to the device, it can be enabled using the
 'enable' file, documented above.
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 3a5ddc96901..b58b84b50fa 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -124,14 +124,19 @@ sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as
 flush         -- If set, the filesystem will try to flush to disk more
 		 early than normal. Not set by default.
 
-rodir	      -- FAT has the ATTR_RO (read-only) attribute. But on Windows,
-		 the ATTR_RO of the directory will be just ignored actually,
-		 and is used by only applications as flag. E.g. it's setted
-		 for the customized folder.
+rodir	      -- FAT has the ATTR_RO (read-only) attribute. On Windows,
+		 the ATTR_RO of the directory will just be ignored,
+		 and is used only by applications as a flag (e.g. it's set
+		 for the customized folder).
 
 		 If you want to use ATTR_RO as read-only flag even for
 		 the directory, set this option.
 
+errors=panic|continue|remount-ro
+	      -- specify FAT behavior on critical errors: panic, continue
+		 without doing anything or remount the partition in
+		 read-only mode (default behavior).
+
 <bool>: 0,1,yes,no,true,false
 
 TODO
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 145c25a170c..e4b6985044a 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -458,7 +458,7 @@ debugfs interface, since it provides control over GPIO direction and
 value instead of just showing a gpio state summary.  Plus, it could be
 present on production systems without debugging support.
 
-Given approprate hardware documentation for the system, userspace could
+Given appropriate hardware documentation for the system, userspace could
 know for example that GPIO #23 controls the write protect line used to
 protect boot loader segments in flash memory.  System upgrade procedures
 may need to temporarily remove that protection, first importing a GPIO,
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index a8321267b5b..bee4c30bc1e 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -2,14 +2,18 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
-  * Fintek F71882FG and F71883FG
-    Prefix: 'f71882fg'
+  * Fintek F71858FG
+    Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
   * Fintek F71862FG and F71863FG
     Prefix: 'f71862fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71882FG and F71883FG
+    Prefix: 'f71882fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F8000
     Prefix: 'f8000'
     Addresses scanned: none, address read from Super I/O config space
@@ -66,13 +70,13 @@ printed when loading the driver.
 
 Three different fan control modes are supported; the mode number is written
 to the pwm#_enable file. Note that not all modes are supported on all
-chips, and some modes may only be available in RPM / PWM mode on the F8000.
+chips, and some modes may only be available in RPM / PWM mode.
 Writing an unsupported mode will result in an invalid parameter error.
 
 * 1: Manual mode
   You ask for a specific PWM duty cycle / DC voltage or a specific % of
   fan#_full_speed by writing to the pwm# file. This mode is only
-  available on the F8000 if the fan channel is in RPM mode.
+  available on the F71858FG / F8000 if the fan channel is in RPM mode.
 
 * 2: Normal auto mode
   You can define a number of temperature/fan speed trip points, which % the
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
index e98bdfea346..1e0d59e000b 100644
--- a/Documentation/hwmon/ibmaem
+++ b/Documentation/hwmon/ibmaem
@@ -7,7 +7,7 @@ henceforth as AEM.
 Supported systems:
   * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
-    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
     Prefix: 'ibmaem'
     Datasheet: Not available
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 004ee161721..dcbd502c879 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -70,6 +70,7 @@ are interpreted as 0! For more on how written strings are interpreted see the
 [0-*]	denotes any positive number starting from 0
 [1-*]	denotes any positive number starting from 1
 RO	read only value
+WO	write only value
 RW	read/write value
 
 Read/write values may be read-only for some chips, depending on the
@@ -295,6 +296,24 @@ temp[1-*]_label	Suggested temperature channel label.
 		user-space.
 		RO
 
+temp[1-*]_lowest
+		Historical minimum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_highest
+		Historical maximum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_reset_history
+		Reset temp_lowest and temp_highest
+		WO
+
+temp_reset_history
+		Reset temp_lowest and temp_highest for all sensors
+		WO
+
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
 back to a temperature (or the other way around for limits) requires
diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
new file mode 100644
index 00000000000..9fc44724921
--- /dev/null
+++ b/Documentation/hwmon/tmp401
@@ -0,0 +1,42 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+  * Texas Instruments TMP401
+    Prefix: 'tmp401'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+  * Texas Instruments TMP411
+    Prefix: 'tmp411'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+
+Authors:
+         Hans de Goede <hdegoede@redhat.com>
+	 Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401 and
+TMP411 chips. These chips implements one remote and one local
+temperature sensor. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+/Documentation/hwmon/sysfs-interface under Temperatures).
+
+The TMP411 chip is compatible with TMP401. It provides some additional
+features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+  Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+  Exported via sysfs attribute temp_reset_history. Writing 1 to this
+  file triggers a reset.
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index b6eb59384bb..02b74899eda 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -12,6 +12,10 @@ Supported chips:
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet:
         http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+  * Winbond W83627DHG-P
+    Prefix: 'w83627dhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: not available
   * Winbond W83667HG
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -28,8 +32,8 @@ Description
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG and W83667HG super I/O chips. We will refer to them collectively
-as Winbond chips.
+W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
+collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -135,3 +139,6 @@ done in the driver for all register addresses.
 The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
 the ICH8 southbridge gets that data via PECI from the DHG, so that the
 southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
+
+The DHG-P has an additional automatic fan speed control mode named Smart Fan
+(TM) III+. This mode is not yet supported by the driver.
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index cfcebb10d14..c269aaa2f26 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The
 dev.platform_data of the device should also point to a struct
 ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
 distance between registers and the input clock speed.
+There is also a possibility to attach a list of i2c_board_info which
+the i2c-ocores driver will add to the bus upon creation.
 
 E.G. something like:
 
@@ -36,9 +38,24 @@ static struct resource ocores_resources[] = {
 	},
 };
 
+/* optional board info */
+struct i2c_board_info ocores_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tsc2003", 0x48),
+		.platform_data = &tsc2003_platform_data,
+		.irq = TSC_IRQ
+	},
+	{
+		I2C_BOARD_INFO("adv7180", 0x42 >> 1),
+		.irq = ADV_IRQ
+	}
+};
+
 static struct ocores_i2c_platform_data myi2c_data = {
 	.regstep	= 2,		/* two bytes between registers */
 	.clock_khz	= 50000,	/* input clock of 50MHz */
+	.devices	= ocores_i2c_board_info, /* optional table of devices */
+	.num_devices	= ARRAY_SIZE(ocores_i2c_board_info), /* table size */
 };
 
 static struct platform_device myi2c = {
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 22efedf60c8..2e758b0e945 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -19,6 +19,9 @@ Supported adapters:
   * VIA Technologies, Inc. VX800/VX820
     Datasheet: available on http://linux.via.com.tw
 
+  * VIA Technologies, Inc. VX855/VX875
+    Datasheet: Availability unknown
+
 Authors:
 	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
  device 1106:3287   (VT8251)
  device 1106:8324   (CX700)
  device 1106:8353   (VX800/VX820)
+ device 1106:8409   (VX855/VX875)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index 0c78f4b1d9d..e77bebfa7b0 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -216,6 +216,8 @@ Other kernel parameters for ide_core are:
 
 * "noflush=[interface_number.device_number]" to disable flush requests
 
+* "nohpa=[interface_number.device_number]" to disable Host Protected Area
+
 * "noprobe=[interface_number.device_number]" to skip probing
 
 * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
index 5a2d69989a8..f6010a53659 100644
--- a/Documentation/isdn/00-INDEX
+++ b/Documentation/isdn/00-INDEX
@@ -22,16 +22,11 @@ README.gigaset
 	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
+>>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
 README.HiSax
 	- info on the HiSax driver which replaces the old teles.
-README.hfc-pci
-	- info on hfc-pci based cards.
-README.pcbit
-	- info on the PCBIT-D ISDN adapter and driver.
-README.syncppp
-	- info on running Sync PPP over ISDN.
-syncPPP.FAQ
-	- frequently asked questions about running PPP over ISDN.
+README.audio
+	- info for running audio over ISDN.
 README.avmb1
 	- info on driver for AVM-B1 ISDN card.
 README.act2000
@@ -42,10 +37,28 @@ README.concap
 	- info on "CONCAP" encapsulation protocol interface used for X.25.
 README.diversion
 	- info on module for isdn diversion services.
+README.fax
+	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters
+README.hfc-pci
+	- info on hfc-pci based cards.
+README.hysdn
+        - info on driver for Hypercope active HYSDN cards
+README.icn
+	- info on the ICN-ISDN-card and its driver.
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN)
+README.pcbit
+	- info on the PCBIT-D ISDN adapter and driver.
 README.sc
 	- info on driver for Spellcaster cards.
+README.syncppp
+	- info on running Sync PPP over ISDN.
 README.x25
 	- info for running X.25 over ISDN.
+syncPPP.FAQ
+	- frequently asked questions about running PPP over ISDN.
 README.hysdn
 	- info on driver for Hypercope active HYSDN cards
 README.mISDN
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 786d619b36e..686e107923e 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -45,7 +45,7 @@ From then on, Kernel CAPI may call the registered callback functions for the
 device.
 
 If the device becomes unusable for any reason (shutdown, disconnect ...), the
-driver has to call capi_ctr_reseted(). This will prevent further calls to the
+driver has to call capi_ctr_down(). This will prevent further calls to the
 callback functions by Kernel CAPI.
 
 
@@ -114,20 +114,36 @@ char *driver_name
 int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
 	(optional) pointer to a callback function for sending firmware and
 	configuration data to the device
+	Return value: 0 on success, error code on error
+	Called in process context.
 
 void (*reset_ctr)(struct capi_ctr *ctrlr)
-	pointer to a callback function for performing a reset on the device,
-	releasing all registered applications
+	(optional) pointer to a callback function for performing a reset on
+	the device, releasing all registered applications
+	Called in process context.
 
 void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
 			capi_register_params *rparam)
 void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
 	pointers to callback functions for registration and deregistration of
 	applications with the device
+	Calls to these functions are serialized by Kernel CAPI so that only
+	one call to any of them is active at any time.
 
 u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	pointer to a callback function for sending a CAPI message to the
 	device
+	Return value: CAPI error code
+	If the method returns 0 (CAPI_NOERROR) the driver has taken ownership
+	of the skb and the caller may no longer access it. If it returns a
+	non-zero (error) value then ownership of the skb returns to the caller
+	who may reuse or free it.
+	The return value should only be used to signal problems with respect
+	to accepting or queueing the message. Errors occurring during the
+	actual processing of the message should be signaled with an
+	appropriate reply message.
+	Calls to this function are not serialized by Kernel CAPI, ie. it must
+	be prepared to be re-entered.
 
 char *(*procinfo)(struct capi_ctr *ctrlr)
 	pointer to a callback function returning the entry for the device in
@@ -138,6 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
+Note: Callback functions are never called in interrupt context.
+
 - to be filled in before calling capi_ctr_ready():
 
 u8 manu[CAPI_MANUFACTURER_LEN]
@@ -153,6 +171,45 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
+4.3 The _cmsg Structure
+
+(declared in <linux/isdn/capiutil.h>)
+
+The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
+accessible form. It contains members for all possible CAPI 2.0 parameters, of
+which only those appearing in the message type currently being processed are
+actually used. Unused members should be set to zero.
+
+Members are named after the CAPI 2.0 standard names of the parameters they
+represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
+types are:
+
+u8          for CAPI parameters of type 'byte'
+
+u16         for CAPI parameters of type 'word'
+
+u32         for CAPI parameters of type 'dword'
+
+_cstruct    for CAPI parameters of type 'struct' not containing any
+	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+	    The member is a pointer to a buffer containing the parameter in
+	    CAPI encoding (length + content). It may also be NULL, which will
+	    be taken to represent an empty (zero length) parameter.
+
+_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
+	    subparameters ('Additional Info' and 'B Protocol')
+	    The representation is a single byte containing one of the values:
+	    CAPI_DEFAULT: the parameter is empty
+	    CAPI_COMPOSE: the values of the subparameters are stored
+	    individually in the corresponding _cmsg structure members
+
+Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
+messages between their transport encoding described in the CAPI 2.0 standard
+and their _cmsg structure representation. Note that capi_cmsg2message() does
+not know or check the size of its destination buffer. The caller must make
+sure it is big enough to accomodate the resulting CAPI message.
+
+
 5. Lower Layer Interface Functions
 
 (declared in <linux/isdn/capilli.h>)
@@ -166,7 +223,7 @@ int detach_capi_ctr(struct capi_ctr *ctrlr)
 	register/unregister a device (controller) with Kernel CAPI
 
 void capi_ctr_ready(struct capi_ctr *ctrlr)
-void capi_ctr_reseted(struct capi_ctr *ctrlr)
+void capi_ctr_down(struct capi_ctr *ctrlr)
 	signal controller ready/not ready
 
 void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
@@ -211,3 +268,32 @@ CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
 							(u32)
 CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
 
+
+Library functions for working with _cmsg structures
+(from <linux/isdn/capiutil.h>):
+
+unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg)
+	Assembles a CAPI 2.0 message from the parameters in *cmsg, storing the
+	result in *msg.
+
+unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg)
+	Disassembles the CAPI 2.0 message in *msg, storing the parameters in
+	*cmsg.
+
+unsigned capi_cmsg_header(_cmsg *cmsg, u16 ApplId, u8 Command, u8 Subcommand,
+			  u16 Messagenumber, u32 Controller)
+	Fills the header part and address field of the _cmsg structure *cmsg
+	with the given values, zeroing the remainder of the structure so only
+	parameters with non-default values need to be changed before sending
+	the message.
+
+void capi_cmsg_answer(_cmsg *cmsg)
+	Sets the low bit of the Subcommand field in *cmsg, thereby converting
+	_REQ to _CONF and _IND to _RESP.
+
+char *capi_cmd2str(u8 Command, u8 Subcommand)
+	Returns the CAPI 2.0 message name corresponding to the given command
+	and subcommand values, as a static ASCII string. The return value may
+	be NULL if the command/subcommand is not one of those defined in the
+	CAPI 2.0 standard.
+
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 02c0e9341dd..f9963103ae3 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -149,10 +149,8 @@ GigaSet 307x Device Driver
      configuration files and chat scripts in the gigaset-VERSION/ppp directory
      in the driver packages from http://sourceforge.net/projects/gigaset307x/.
      Please note that the USB drivers are not able to change the state of the
-     control lines (the M105 driver can be configured to use some undocumented
-     control requests, if you really need the control lines, though). This means
-     you must use "Stupid Mode" if you are using wvdial or you should use the
-     nocrtscts option of pppd.
+     control lines. This means you must use "Stupid Mode" if you are using
+     wvdial or you should use the nocrtscts option of pppd.
      You must also assure that the ppp_async module is loaded with the parameter
      flag_time=0. You can do this e.g. by adding a line like
 
@@ -190,20 +188,19 @@ GigaSet 307x Device Driver
      You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
      setting (ttyGxy is ttyGU0 or ttyGB0).
 
-2.6. M105 Undocumented USB Requests
-     ------------------------------
-
-     The Gigaset M105 USB data box understands a couple of useful, but
-     undocumented USB commands. These requests are not used in normal
-     operation (for wireless access to the base), but are needed for access
-     to the M105's own configuration mode (registration to the base, baudrate
-     and line format settings, device status queries) via the gigacontr
-     utility. Their use is controlled by the kernel configuration option
-     "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you
-     encounter error code -ENOTTY when trying to use some features of the
-     M105, try setting that option to "y" via 'make {x,menu}config' and
-     recompiling the driver.
-
+2.6. Unregistered Wireless Devices (M101/M105)
+     -----------------------------------------
+     The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
+     the M101 and M105 wireless devices to be used as ISDN devices for ISDN
+     connections through a Gigaset base. Therefore they assume that the device
+     is registered to a DECT base.
+
+     If the M101/M105 device is not registered to a base, initialization of
+     the device fails, and a corresponding error message is logged by the
+     driver. In that situation, a restricted set of functions is available
+     which includes, in particular, those necessary for registering the device
+     to a base or for switching it between Fixed Part and Portable Part
+     modes.
 
 3.   Troubleshooting
      ---------------
@@ -234,11 +231,12 @@ GigaSet 307x Device Driver
         Select Unimodem mode for all DECT data adapters. (see section 2.4.)
 
      Problem:
-        You want to configure your USB DECT data adapter (M105) but gigacontr
-        reports an error: "/dev/ttyGU0: Inappropriate ioctl for device".
+	Messages like this:
+	    usb_gigaset 3-2:1.0: Could not initialize the device.
+	appear in your syslog.
      Solution:
-        Recompile the usb_gigaset driver with the kernel configuration option
-        CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
+	Check whether your M10x wireless device is correctly registered to the
+	Gigaset base. (see section 2.6.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 26a7c0a9319..849b5e56d06 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -35,48 +35,26 @@ new .config files to see the differences:
 
 (Yes, we need something better here.)
 
-
-======================================================================
-menuconfig
---------------------------------------------------
-
-SEARCHING for CONFIG symbols
-
-Searching in menuconfig:
-
-	The Search function searches for kernel configuration symbol
-	names, so you have to know something close to what you are
-	looking for.
-
-	Example:
-		/hotplug
-		This lists all config symbols that contain "hotplug",
-		e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG.
-
-	For search help, enter / followed TAB-TAB-TAB (to highlight
-	<Help>) and Enter.  This will tell you that you can also use
-	regular expressions (regexes) in the search string, so if you
-	are not interested in MEMORY_HOTPLUG, you could try
-
-		/^hotplug
-
-
 ______________________________________________________________________
-Color Themes for 'menuconfig'
+Environment variables for '*config'
 
-It is possible to select different color themes using the variable
-MENUCONFIG_COLOR.  To select a theme use:
+KCONFIG_CONFIG
+--------------------------------------------------
+This environment variable can be used to specify a default kernel config
+file name to override the default name of ".config".
 
-	make MENUCONFIG_COLOR=<theme> menuconfig
+KCONFIG_OVERWRITECONFIG
+--------------------------------------------------
+If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
+break symlinks when .config is a symlink to somewhere else.
 
-Available themes are:
-  mono       => selects colors suitable for monochrome displays
-  blackbg    => selects a color scheme with black background
-  classic    => theme with blue background. The classic look
-  bluetitle  => a LCD friendly version of classic. (default)
+KCONFIG_NOTIMESTAMP
+--------------------------------------------------
+If this environment variable exists and is non-null, the timestamp line
+in generated .config files is omitted.
 
 ______________________________________________________________________
-Environment variables in 'menuconfig'
+Environment variables for '{allyes/allmod/allno/rand}config'
 
 KCONFIG_ALLCONFIG
 --------------------------------------------------
@@ -95,8 +73,7 @@ values.
 This enables you to create "miniature" config (miniconfig) or custom
 config files containing just the config symbols that you are interested
 in.  Then the kernel config system generates the full .config file,
-including dependencies of your miniconfig file, based on the miniconfig
-file.
+including symbols of your miniconfig file.
 
 This 'KCONFIG_ALLCONFIG' file is a config file which contains
 (usually a subset of all) preset config symbols.  These variable
@@ -113,26 +90,14 @@ These examples will disable most options (allnoconfig) but enable or
 disable the options that are explicitly listed in the specified
 mini-config files.
 
+______________________________________________________________________
+Environment variables for 'silentoldconfig'
+
 KCONFIG_NOSILENTUPDATE
 --------------------------------------------------
 If this variable has a non-blank value, it prevents silent kernel
 config udpates (requires explicit updates).
 
-KCONFIG_CONFIG
---------------------------------------------------
-This environment variable can be used to specify a default kernel config
-file name to override the default name of ".config".
-
-KCONFIG_OVERWRITECONFIG
---------------------------------------------------
-If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
-break symlinks when .config is a symlink to somewhere else.
-
-KCONFIG_NOTIMESTAMP
---------------------------------------------------
-If this environment variable exists and is non-null, the timestamp line
-in generated .config files is omitted.
-
 KCONFIG_AUTOCONFIG
 --------------------------------------------------
 This environment variable can be set to specify the path & name of the
@@ -143,15 +108,54 @@ KCONFIG_AUTOHEADER
 This environment variable can be set to specify the path & name of the
 "autoconf.h" (header) file.  Its default value is "include/linux/autoconf.h".
 
+
+======================================================================
+menuconfig
+--------------------------------------------------
+
+SEARCHING for CONFIG symbols
+
+Searching in menuconfig:
+
+	The Search function searches for kernel configuration symbol
+	names, so you have to know something close to what you are
+	looking for.
+
+	Example:
+		/hotplug
+		This lists all config symbols that contain "hotplug",
+		e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG.
+
+	For search help, enter / followed TAB-TAB-TAB (to highlight
+	<Help>) and Enter.  This will tell you that you can also use
+	regular expressions (regexes) in the search string, so if you
+	are not interested in MEMORY_HOTPLUG, you could try
+
+		/^hotplug
+
 ______________________________________________________________________
-menuconfig User Interface Options
-----------------------------------------------------------------------
+User interface options for 'menuconfig'
+
+MENUCONFIG_COLOR
+--------------------------------------------------
+It is possible to select different color themes using the variable
+MENUCONFIG_COLOR.  To select a theme use:
+
+	make MENUCONFIG_COLOR=<theme> menuconfig
+
+Available themes are:
+  mono       => selects colors suitable for monochrome displays
+  blackbg    => selects a color scheme with black background
+  classic    => theme with blue background. The classic look
+  bluetitle  => a LCD friendly version of classic. (default)
+
 MENUCONFIG_MODE
 --------------------------------------------------
 This mode shows all sub-menus in one large tree.
 
 Example:
-	MENUCONFIG_MODE=single_menu make menuconfig
+	make MENUCONFIG_MODE=single_menu menuconfig
+
 
 ======================================================================
 xconfig
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index b1096da953c..0767cf69c69 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -275,7 +275,7 @@ following files:
 
 		KERNELDIR := /lib/modules/`uname -r`/build
 		all::
-			$(MAKE) -C $KERNELDIR M=`pwd` $@
+			$(MAKE) -C $(KERNELDIR) M=`pwd` $@
 
 		# Module specific targets
 		genbin:
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 3f4bc840da8..cab61d84225 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -108,7 +108,7 @@ There are two possible methods of using Kdump.
 
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
-   only with the architecutres which support a relocatable kernel. As
+   only with the architectures which support a relocatable kernel. As
    of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
    kernel.
 
@@ -222,7 +222,7 @@ Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
 
 - No specific options are required to create a dump-capture kernel
-  for ia64, other than those specified in the arch idependent section
+  for ia64, other than those specified in the arch independent section
   above. This means that it is possible to use the system kernel
   as a dump-capture kernel if desired.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7bcdebffdab..ad380063077 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -491,6 +491,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
+	cmo_free_hint=	[PPC] Format: { yes | no }
+			Specify whether pages are marked as being inactive
+			when they are freed.  This is used in CMO environments
+			to determine OS memory pressure for page stealing by
+			a hypervisor.
+			Default: yes
+
 	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
@@ -887,11 +894,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	ide-core.nodma=	[HW] (E)IDE subsystem
 			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
-			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
-			.chs .ignore_cable are additional options
-			See Documentation/ide/ide.txt.
-
-	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
+			.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
+			.cdrom .chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
@@ -1076,7 +1080,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
-			(only serial suported for now)
+			(only serial supported for now)
 			Format: <serial_device>[,baud]
 
 	kmac=		[MIPS] korina ethernet MAC address.
@@ -1405,7 +1409,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			('y', default) or cooked coordinates ('n')
 
 	mtrr_chunk_size=nn[KMG] [X86]
-			used for mtrr cleanup. It is largest continous chunk
+			used for mtrr cleanup. It is largest continuous chunk
 			that could hold holes aka. UC entries.
 
 	mtrr_gran_size=nn[KMG] [X86]
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index b2e374586bd..c79ab996dad 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -132,7 +132,7 @@ kobject_name():
     const char *kobject_name(const struct kobject * kobj);
 
 There is a helper function to both initialize and add the kobject to the
-kernel at the same time, called supprisingly enough kobject_init_and_add():
+kernel at the same time, called surprisingly enough kobject_init_and_add():
 
     int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype,
                              struct kobject *parent, const char *fmt, ...);
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 5ee2a02b3b4..0768fcc3ba3 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -40,7 +40,7 @@ NOTE: The Acer Aspire One is not supported hardware. It cannot work with
 acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been
 blacklisted until that happens.
 
-Please see the website for the current list of known working hardare:
+Please see the website for the current list of known working hardware:
 
 http://code.google.com/p/aceracpi/wiki/SupportedHardware
 
diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt
index 8b2bc1572d9..23ce7d350d1 100644
--- a/Documentation/laptops/sony-laptop.txt
+++ b/Documentation/laptops/sony-laptop.txt
@@ -22,7 +22,7 @@ If your laptop model supports it, you will find sysfs files in the
 /sys/class/backlight/sony/
 directory. You will be able to query and set the current screen
 brightness:
-	brightness		get/set screen brightness (an iteger
+	brightness		get/set screen brightness (an integer
 				between 0 and 7)
 	actual_brightness	reading from this file will query the HW
 				to get real brightness value
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index e7e9a69069e..78e354b42f6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -506,7 +506,7 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
-SW_RFKILL_ALL	T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL	T60 and later hardware rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 
 Non hot-key ACPI HKEY event map:
diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile
index 1f4f9e888bd..28c8cdfcafd 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/lguest/Makefile
@@ -1,6 +1,5 @@
 # This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
-LDLIBS:=-lz
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
 
 all: lguest
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index d36fcc0f271..9ebcd6ef361 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -16,6 +16,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/wait.h>
+#include <sys/eventfd.h>
 #include <fcntl.h>
 #include <stdbool.h>
 #include <errno.h>
@@ -59,7 +60,6 @@ typedef uint8_t u8;
 /*:*/
 
 #define PAGE_PRESENT 0x7 	/* Present, RW, Execute */
-#define NET_PEERNUM 1
 #define BRIDGE_PFX "bridge:"
 #ifndef SIOCBRADDIF
 #define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
@@ -76,19 +76,12 @@ static bool verbose;
 	do { if (verbose) printf(args); } while(0)
 /*:*/
 
-/* File descriptors for the Waker. */
-struct {
-	int pipe[2];
-	int lguest_fd;
-} waker_fds;
-
 /* The pointer to the start of guest memory. */
 static void *guest_base;
 /* The maximum guest physical address allowed, and maximum possible. */
 static unsigned long guest_limit, guest_max;
-/* The pipe for signal hander to write to. */
-static int timeoutpipe[2];
-static unsigned int timeout_usec = 500;
+/* The /dev/lguest file descriptor. */
+static int lguest_fd;
 
 /* a per-cpu variable indicating whose vcpu is currently running */
 static unsigned int __thread cpu_id;
@@ -96,11 +89,6 @@ static unsigned int __thread cpu_id;
 /* This is our list of devices. */
 struct device_list
 {
-	/* Summary information about the devices in our list: ready to pass to
-	 * select() to ask which need servicing.*/
-	fd_set infds;
-	int max_infd;
-
 	/* Counter to assign interrupt numbers. */
 	unsigned int next_irq;
 
@@ -126,22 +114,21 @@ struct device
 	/* The linked-list pointer. */
 	struct device *next;
 
-	/* The this device's descriptor, as mapped into the Guest. */
+	/* The device's descriptor, as mapped into the Guest. */
 	struct lguest_device_desc *desc;
 
+	/* We can't trust desc values once Guest has booted: we use these. */
+	unsigned int feature_len;
+	unsigned int num_vq;
+
 	/* The name of this device, for --verbose. */
 	const char *name;
 
-	/* If handle_input is set, it wants to be called when this file
-	 * descriptor is ready. */
-	int fd;
-	bool (*handle_input)(int fd, struct device *me);
-
 	/* Any queues attached to this device */
 	struct virtqueue *vq;
 
-	/* Handle status being finalized (ie. feature bits stable). */
-	void (*ready)(struct device *me);
+	/* Is it operational */
+	bool running;
 
 	/* Device-specific data. */
 	void *priv;
@@ -164,22 +151,28 @@ struct virtqueue
 	/* Last available index we saw. */
 	u16 last_avail_idx;
 
-	/* The routine to call when the Guest pings us, or timeout. */
-	void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
+	/* How many are used since we sent last irq? */
+	unsigned int pending_used;
 
-	/* Outstanding buffers */
-	unsigned int inflight;
+	/* Eventfd where Guest notifications arrive. */
+	int eventfd;
 
-	/* Is this blocked awaiting a timer? */
-	bool blocked;
+	/* Function for the thread which is servicing this virtqueue. */
+	void (*service)(struct virtqueue *vq);
+	pid_t thread;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
 static char **main_args;
 
-/* Since guest is UP and we don't run at the same time, we don't need barriers.
- * But I include them in the code in case others copy it. */
-#define wmb()
+/* The original tty settings to restore on exit. */
+static struct termios orig_term;
+
+/* We have to be careful with barriers: our devices are all run in separate
+ * threads and so we need to make sure that changes visible to the Guest happen
+ * in precise order. */
+#define wmb() __asm__ __volatile__("" : : : "memory")
+#define mb() __asm__ __volatile__("" : : : "memory")
 
 /* Convert an iovec element to the given type.
  *
@@ -245,7 +238,7 @@ static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
 static u8 *get_feature_bits(struct device *dev)
 {
 	return (u8 *)(dev->desc + 1)
-		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig);
+		+ dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
 /*L:100 The Launcher code itself takes us out into userspace, that scary place
@@ -505,99 +498,19 @@ static void concat(char *dst, char *args[])
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
  * entry point for the Guest. */
-static int tell_kernel(unsigned long start)
+static void tell_kernel(unsigned long start)
 {
 	unsigned long args[] = { LHREQ_INITIALIZE,
 				 (unsigned long)guest_base,
 				 guest_limit / getpagesize(), start };
-	int fd;
-
 	verbose("Guest: %p - %p (%#lx)\n",
 		guest_base, guest_base + guest_limit, guest_limit);
-	fd = open_or_die("/dev/lguest", O_RDWR);
-	if (write(fd, args, sizeof(args)) < 0)
+	lguest_fd = open_or_die("/dev/lguest", O_RDWR);
+	if (write(lguest_fd, args, sizeof(args)) < 0)
 		err(1, "Writing to /dev/lguest");
-
-	/* We return the /dev/lguest file descriptor to control this Guest */
-	return fd;
 }
 /*:*/
 
-static void add_device_fd(int fd)
-{
-	FD_SET(fd, &devices.infds);
-	if (fd > devices.max_infd)
-		devices.max_infd = fd;
-}
-
-/*L:200
- * The Waker.
- *
- * With console, block and network devices, we can have lots of input which we
- * need to process.  We could try to tell the kernel what file descriptors to
- * watch, but handing a file descriptor mask through to the kernel is fairly
- * icky.
- *
- * Instead, we clone off a thread which watches the file descriptors and writes
- * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
- * stop running the Guest.  This causes the Launcher to return from the
- * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
- * the LHREQ_BREAK and wake us up again.
- *
- * This, of course, is merely a different *kind* of icky.
- *
- * Given my well-known antipathy to threads, I'd prefer to use processes.  But
- * it's easier to share Guest memory with threads, and trivial to share the
- * devices.infds as the Launcher changes it.
- */
-static int waker(void *unused)
-{
-	/* Close the write end of the pipe: only the Launcher has it open. */
-	close(waker_fds.pipe[1]);
-
-	for (;;) {
-		fd_set rfds = devices.infds;
-		unsigned long args[] = { LHREQ_BREAK, 1 };
-		unsigned int maxfd = devices.max_infd;
-
-		/* We also listen to the pipe from the Launcher. */
-		FD_SET(waker_fds.pipe[0], &rfds);
-		if (waker_fds.pipe[0] > maxfd)
-			maxfd = waker_fds.pipe[0];
-
-		/* Wait until input is ready from one of the devices. */
-		select(maxfd+1, &rfds, NULL, NULL, NULL);
-
-		/* Message from Launcher? */
-		if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
-			char c;
-			/* If this fails, then assume Launcher has exited.
-			 * Don't do anything on exit: we're just a thread! */
-			if (read(waker_fds.pipe[0], &c, 1) != 1)
-				_exit(0);
-			continue;
-		}
-
-		/* Send LHREQ_BREAK command to snap the Launcher out of it. */
-		pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
-	}
-	return 0;
-}
-
-/* This routine just sets up a pipe to the Waker process. */
-static void setup_waker(int lguest_fd)
-{
-	/* This pipe is closed when Launcher dies, telling Waker. */
-	if (pipe(waker_fds.pipe) != 0)
-		err(1, "Creating pipe for Waker");
-
-	/* Waker also needs to know the lguest fd */
-	waker_fds.lguest_fd = lguest_fd;
-
-	if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
-		err(1, "Creating Waker");
-}
-
 /*
  * Device Handling.
  *
@@ -623,49 +536,90 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
 /* Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
  * at the end. */
-static unsigned next_desc(struct virtqueue *vq, unsigned int i)
+static unsigned next_desc(struct vring_desc *desc,
+			  unsigned int i, unsigned int max)
 {
 	unsigned int next;
 
 	/* If this descriptor says it doesn't chain, we're done. */
-	if (!(vq->vring.desc[i].flags & VRING_DESC_F_NEXT))
-		return vq->vring.num;
+	if (!(desc[i].flags & VRING_DESC_F_NEXT))
+		return max;
 
 	/* Check they're not leading us off end of descriptors. */
-	next = vq->vring.desc[i].next;
+	next = desc[i].next;
 	/* Make sure compiler knows to grab that: we don't want it changing! */
 	wmb();
 
-	if (next >= vq->vring.num)
+	if (next >= max)
 		errx(1, "Desc next is %u", next);
 
 	return next;
 }
 
+/* This actually sends the interrupt for this virtqueue */
+static void trigger_irq(struct virtqueue *vq)
+{
+	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+
+	/* Don't inform them if nothing used. */
+	if (!vq->pending_used)
+		return;
+	vq->pending_used = 0;
+
+	/* If they don't want an interrupt, don't send one, unless empty. */
+	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	    && lg_last_avail(vq) != vq->vring.avail->idx)
+		return;
+
+	/* Send the Guest an interrupt tell them we used something up. */
+	if (write(lguest_fd, buf, sizeof(buf)) != 0)
+		err(1, "Triggering irq %i", vq->config.irq);
+}
+
 /* This looks in the virtqueue and for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found, or vq->vring.num (which
- * is never a valid descriptor number) if none was found. */
-static unsigned get_vq_desc(struct virtqueue *vq,
-			    struct iovec iov[],
-			    unsigned int *out_num, unsigned int *in_num)
+ * This function returns the descriptor number found. */
+static unsigned wait_for_vq_desc(struct virtqueue *vq,
+				 struct iovec iov[],
+				 unsigned int *out_num, unsigned int *in_num)
 {
-	unsigned int i, head;
-	u16 last_avail;
+	unsigned int i, head, max;
+	struct vring_desc *desc;
+	u16 last_avail = lg_last_avail(vq);
+
+	while (last_avail == vq->vring.avail->idx) {
+		u64 event;
+
+		/* OK, tell Guest about progress up to now. */
+		trigger_irq(vq);
+
+		/* OK, now we need to know about added descriptors. */
+		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+
+		/* They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again. */
+		mb();
+		if (last_avail != vq->vring.avail->idx) {
+			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+			break;
+		}
+
+		/* Nothing new?  Wait for eventfd to tell us they refilled. */
+		if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
+			errx(1, "Event read failed?");
+
+		/* We don't need to be notified again. */
+		vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+	}
 
 	/* Check it isn't doing very strange things with descriptor numbers. */
-	last_avail = lg_last_avail(vq);
 	if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
 		errx(1, "Guest moved used index from %u to %u",
 		     last_avail, vq->vring.avail->idx);
 
-	/* If there's nothing new since last we looked, return invalid. */
-	if (vq->vring.avail->idx == last_avail)
-		return vq->vring.num;
-
 	/* Grab the next descriptor number they're advertising, and increment
 	 * the index we've seen. */
 	head = vq->vring.avail->ring[last_avail % vq->vring.num];
@@ -678,15 +632,28 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 	/* When we start there are none of either input nor output. */
 	*out_num = *in_num = 0;
 
+	max = vq->vring.num;
+	desc = vq->vring.desc;
 	i = head;
+
+	/* If this is an indirect entry, then this buffer contains a descriptor
+	 * table which we handle as if it's any normal descriptor chain. */
+	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+		if (desc[i].len % sizeof(struct vring_desc))
+			errx(1, "Invalid size for indirect buffer table");
+
+		max = desc[i].len / sizeof(struct vring_desc);
+		desc = check_pointer(desc[i].addr, desc[i].len);
+		i = 0;
+	}
+
 	do {
 		/* Grab the first descriptor, and check it's OK. */
-		iov[*out_num + *in_num].iov_len = vq->vring.desc[i].len;
+		iov[*out_num + *in_num].iov_len = desc[i].len;
 		iov[*out_num + *in_num].iov_base
-			= check_pointer(vq->vring.desc[i].addr,
-					vq->vring.desc[i].len);
+			= check_pointer(desc[i].addr, desc[i].len);
 		/* If this is an input descriptor, increment that count. */
-		if (vq->vring.desc[i].flags & VRING_DESC_F_WRITE)
+		if (desc[i].flags & VRING_DESC_F_WRITE)
 			(*in_num)++;
 		else {
 			/* If it's an output descriptor, they're all supposed
@@ -697,11 +664,10 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 		}
 
 		/* If we've got too many, that implies a descriptor loop. */
-		if (*out_num + *in_num > vq->vring.num)
+		if (*out_num + *in_num > max)
 			errx(1, "Looped descriptor");
-	} while ((i = next_desc(vq, i)) != vq->vring.num);
+	} while ((i = next_desc(desc, i, max)) != max);
 
-	vq->inflight++;
 	return head;
 }
 
@@ -719,44 +685,20 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len)
 	/* Make sure buffer is written before we update index. */
 	wmb();
 	vq->vring.used->idx++;
-	vq->inflight--;
-}
-
-/* This actually sends the interrupt for this virtqueue */
-static void trigger_irq(int fd, struct virtqueue *vq)
-{
-	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
-
-	/* If they don't want an interrupt, don't send one, unless empty. */
-	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
-	    && vq->inflight)
-		return;
-
-	/* Send the Guest an interrupt tell them we used something up. */
-	if (write(fd, buf, sizeof(buf)) != 0)
-		err(1, "Triggering irq %i", vq->config.irq);
+	vq->pending_used++;
 }
 
 /* And here's the combo meal deal.  Supersize me! */
-static void add_used_and_trigger(int fd, struct virtqueue *vq,
-				 unsigned int head, int len)
+static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 {
 	add_used(vq, head, len);
-	trigger_irq(fd, vq);
+	trigger_irq(vq);
 }
 
 /*
  * The Console
  *
- * Here is the input terminal setting we save, and the routine to restore them
- * on exit so the user gets their terminal back. */
-static struct termios orig_term;
-static void restore_term(void)
-{
-	tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
-}
-
-/* We associate some data with the console for our exit hack. */
+ * We associate some data with the console for our exit hack. */
 struct console_abort
 {
 	/* How many times have they hit ^C? */
@@ -766,276 +708,275 @@ struct console_abort
 };
 
 /* This is the routine which handles console input (ie. stdin). */
-static bool handle_console_input(int fd, struct device *dev)
+static void console_input(struct virtqueue *vq)
 {
 	int len;
 	unsigned int head, in_num, out_num;
-	struct iovec iov[dev->vq->vring.num];
-	struct console_abort *abort = dev->priv;
-
-	/* First we need a console buffer from the Guests's input virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-
-	/* If they're not ready for input, stop listening to this file
-	 * descriptor.  We'll start again once they add an input buffer. */
-	if (head == dev->vq->vring.num)
-		return false;
+	struct console_abort *abort = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
 
+	/* Make sure there's a descriptor waiting. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in console in queue?");
 
-	/* This is why we convert to iovecs: the readv() call uses them, and so
-	 * it reads straight into the Guest's buffer. */
-	len = readv(dev->fd, iov, in_num);
+	/* Read it in. */
+	len = readv(STDIN_FILENO, iov, in_num);
 	if (len <= 0) {
-		/* This implies that the console is closed, is /dev/null, or
-		 * something went terribly wrong. */
+		/* Ran out of input? */
 		warnx("Failed to get console input, ignoring console.");
-		/* Put the input terminal back. */
-		restore_term();
-		/* Remove callback from input vq, so it doesn't restart us. */
-		dev->vq->handle_output = NULL;
-		/* Stop listening to this fd: don't call us again. */
-		return false;
+		/* For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here. */
+		for (;;)
+			pause();
 	}
 
-	/* Tell the Guest about the new input. */
-	add_used_and_trigger(fd, dev->vq, head, len);
+	add_used_and_trigger(vq, head, len);
 
 	/* Three ^C within one second?  Exit.
 	 *
-	 * This is such a hack, but works surprisingly well.  Each ^C has to be
-	 * in a buffer by itself, so they can't be too fast.  But we check that
-	 * we get three within about a second, so they can't be too slow. */
-	if (len == 1 && ((char *)iov[0].iov_base)[0] == 3) {
-		if (!abort->count++)
-			gettimeofday(&abort->start, NULL);
-		else if (abort->count == 3) {
-			struct timeval now;
-			gettimeofday(&now, NULL);
-			if (now.tv_sec <= abort->start.tv_sec+1) {
-				unsigned long args[] = { LHREQ_BREAK, 0 };
-				/* Close the fd so Waker will know it has to
-				 * exit. */
-				close(waker_fds.pipe[1]);
-				/* Just in case Waker is blocked in BREAK, send
-				 * unbreak now. */
-				write(fd, args, sizeof(args));
-				exit(2);
-			}
-			abort->count = 0;
-		}
-	} else
-		/* Any other key resets the abort counter. */
+	 * This is such a hack, but works surprisingly well.  Each ^C has to
+	 * be in a buffer by itself, so they can't be too fast.  But we check
+	 * that we get three within about a second, so they can't be too
+	 * slow. */
+	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
 		abort->count = 0;
+		return;
+	}
 
-	/* Everything went OK! */
-	return true;
+	abort->count++;
+	if (abort->count == 1)
+		gettimeofday(&abort->start, NULL);
+	else if (abort->count == 3) {
+		struct timeval now;
+		gettimeofday(&now, NULL);
+		/* Kill all Launcher processes with SIGINT, like normal ^C */
+		if (now.tv_sec <= abort->start.tv_sec+1)
+			kill(0, SIGINT);
+		abort->count = 0;
+	}
 }
 
-/* Handling output for console is simple: we just get all the output buffers
- * and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
+/* This is the routine which handles console output (ie. stdout). */
+static void console_output(struct virtqueue *vq)
 {
 	unsigned int head, out, in;
-	int len;
 	struct iovec iov[vq->vring.num];
 
-	/* Keep getting output buffers from the Guest until we run out. */
-	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
-		if (in)
-			errx(1, "Input buffers in output queue?");
-		len = writev(STDOUT_FILENO, iov, out);
-		add_used_and_trigger(fd, vq, head, len);
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		errx(1, "Input buffers in console output queue?");
+	while (!iov_empty(iov, out)) {
+		int len = writev(STDOUT_FILENO, iov, out);
+		if (len <= 0)
+			err(1, "Write to stdout gave %i", len);
+		iov_consume(iov, out, len);
 	}
-}
-
-/* This is called when we no longer want to hear about Guest changes to a
- * virtqueue.  This is more efficient in high-traffic cases, but it means we
- * have to set a timer to check if any more changes have occurred. */
-static void block_vq(struct virtqueue *vq)
-{
-	struct itimerval itm;
-
-	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	vq->blocked = true;
-
-	itm.it_interval.tv_sec = 0;
-	itm.it_interval.tv_usec = 0;
-	itm.it_value.tv_sec = 0;
-	itm.it_value.tv_usec = timeout_usec;
-
-	setitimer(ITIMER_REAL, &itm, NULL);
+	add_used(vq, head, 0);
 }
 
 /*
  * The Network
  *
  * Handling output for network is also simple: we get all the output buffers
- * and write them (ignoring the first element) to this device's file descriptor
- * (/dev/net/tun).
+ * and write them to /dev/net/tun.
  */
-static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
+struct net_info {
+	int tunfd;
+};
+
+static void net_output(struct virtqueue *vq)
 {
-	unsigned int head, out, in, num = 0;
-	int len;
+	struct net_info *net_info = vq->dev->priv;
+	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
-	static int last_timeout_num;
-
-	/* Keep getting output buffers from the Guest until we run out. */
-	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
-		if (in)
-			errx(1, "Input buffers in output queue?");
-		len = writev(vq->dev->fd, iov, out);
-		if (len < 0)
-			err(1, "Writing network packet to tun");
-		add_used_and_trigger(fd, vq, head, len);
-		num++;
-	}
 
-	/* Block further kicks and set up a timer if we saw anything. */
-	if (!timeout && num)
-		block_vq(vq);
-
-	/* We never quite know how long should we wait before we check the
-	 * queue again for more packets.  We start at 500 microseconds, and if
-	 * we get fewer packets than last time, we assume we made the timeout
-	 * too small and increase it by 10 microseconds.  Otherwise, we drop it
-	 * by one microsecond every time.  It seems to work well enough. */
-	if (timeout) {
-		if (num < last_timeout_num)
-			timeout_usec += 10;
-		else if (timeout_usec > 1)
-			timeout_usec--;
-		last_timeout_num = num;
-	}
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		errx(1, "Input buffers in net output queue?");
+	if (writev(net_info->tunfd, iov, out) < 0)
+		errx(1, "Write to tun failed?");
+	add_used(vq, head, 0);
+}
+
+/* Will reading from this file descriptor block? */
+static bool will_block(int fd)
+{
+	fd_set fdset;
+	struct timeval zero = { 0, 0 };
+	FD_ZERO(&fdset);
+	FD_SET(fd, &fdset);
+	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
 }
 
-/* This is where we handle a packet coming in from the tun device to our
+/* This is where we handle packets coming in from the tun device to our
  * Guest. */
-static bool handle_tun_input(int fd, struct device *dev)
+static void net_input(struct virtqueue *vq)
 {
-	unsigned int head, in_num, out_num;
 	int len;
-	struct iovec iov[dev->vq->vring.num];
-
-	/* First we need a network buffer from the Guests's recv virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-	if (head == dev->vq->vring.num) {
-		/* Now, it's expected that if we try to send a packet too
-		 * early, the Guest won't be ready yet.  Wait until the device
-		 * status says it's ready. */
-		/* FIXME: Actually want DRIVER_ACTIVE here. */
-
-		/* Now tell it we want to know if new things appear. */
-		dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-		wmb();
-
-		/* We'll turn this back on if input buffers are registered. */
-		return false;
-	} else if (out_num)
-		errx(1, "Output buffers in network recv queue?");
-
-	/* Read the packet from the device directly into the Guest's buffer. */
-	len = readv(dev->fd, iov, in_num);
-	if (len <= 0)
-		err(1, "reading network");
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
+	struct net_info *net_info = vq->dev->priv;
 
-	/* Tell the Guest about the new packet. */
-	add_used_and_trigger(fd, dev->vq, head, len);
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (out)
+		errx(1, "Output buffers in net input queue?");
 
-	verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
-		((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
-		head != dev->vq->vring.num ? "sent" : "discarded");
+	/* Deliver interrupt now, since we're about to sleep. */
+	if (vq->pending_used && will_block(net_info->tunfd))
+		trigger_irq(vq);
 
-	/* All good. */
-	return true;
+	len = readv(net_info->tunfd, iov, in);
+	if (len <= 0)
+		err(1, "Failed to read from tun.");
+	add_used(vq, head, len);
 }
 
-/*L:215 This is the callback attached to the network and console input
- * virtqueues: it ensures we try again, in case we stopped console or net
- * delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
+/* This is the helper to create threads. */
+static int do_thread(void *_vq)
 {
-	add_device_fd(vq->dev->fd);
-	/* Snap the Waker out of its select loop. */
-	write(waker_fds.pipe[1], "", 1);
+	struct virtqueue *vq = _vq;
+
+	for (;;)
+		vq->service(vq);
+	return 0;
 }
 
-static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+/* When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us! */
+static void kill_launcher(int signal)
 {
-	/* We don't need to know again when Guest refills receive buffer. */
-	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	enable_fd(fd, vq, timeout);
+	kill(0, SIGTERM);
 }
 
-/* When the Guest tells us they updated the status field, we handle it. */
-static void update_device_status(struct device *dev)
+static void reset_device(struct device *dev)
 {
 	struct virtqueue *vq;
 
-	/* This is a reset. */
-	if (dev->desc->status == 0) {
-		verbose("Resetting device %s\n", dev->name);
+	verbose("Resetting device %s\n", dev->name);
 
-		/* Clear any features they've acked. */
-		memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
-		       dev->desc->feature_len);
+	/* Clear any features they've acked. */
+	memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
 
-		/* Zero out the virtqueues. */
-		for (vq = dev->vq; vq; vq = vq->next) {
-			memset(vq->vring.desc, 0,
-			       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
-			lg_last_avail(vq) = 0;
+	/* We're going to be explicitly killing threads, so ignore them. */
+	signal(SIGCHLD, SIG_IGN);
+
+	/* Zero out the virtqueues, get rid of their threads */
+	for (vq = dev->vq; vq; vq = vq->next) {
+		if (vq->thread != (pid_t)-1) {
+			kill(vq->thread, SIGTERM);
+			waitpid(vq->thread, NULL, 0);
+			vq->thread = (pid_t)-1;
 		}
-	} else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+		memset(vq->vring.desc, 0,
+		       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
+		lg_last_avail(vq) = 0;
+	}
+	dev->running = false;
+
+	/* Now we care if threads die. */
+	signal(SIGCHLD, (void *)kill_launcher);
+}
+
+static void create_thread(struct virtqueue *vq)
+{
+	/* Create stack for thread and run it.  Since stack grows
+	 * upwards, we point the stack pointer to the end of this
+	 * region. */
+	char *stack = malloc(32768);
+	unsigned long args[] = { LHREQ_EVENTFD,
+				 vq->config.pfn*getpagesize(), 0 };
+
+	/* Create a zero-initialized eventfd. */
+	vq->eventfd = eventfd(0, 0);
+	if (vq->eventfd < 0)
+		err(1, "Creating eventfd");
+	args[2] = vq->eventfd;
+
+	/* Attach an eventfd to this virtqueue: it will go off
+	 * when the Guest does an LHCALL_NOTIFY for this vq. */
+	if (write(lguest_fd, &args, sizeof(args)) != 0)
+		err(1, "Attaching eventfd");
+
+	/* CLONE_VM: because it has to access the Guest memory, and
+	 * SIGCHLD so we get a signal if it dies. */
+	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
+	if (vq->thread == (pid_t)-1)
+		err(1, "Creating clone");
+	/* We close our local copy, now the child has it. */
+	close(vq->eventfd);
+}
+
+static void start_device(struct device *dev)
+{
+	unsigned int i;
+	struct virtqueue *vq;
+
+	verbose("Device %s OK: offered", dev->name);
+	for (i = 0; i < dev->feature_len; i++)
+		verbose(" %02x", get_feature_bits(dev)[i]);
+	verbose(", accepted");
+	for (i = 0; i < dev->feature_len; i++)
+		verbose(" %02x", get_feature_bits(dev)
+			[dev->feature_len+i]);
+
+	for (vq = dev->vq; vq; vq = vq->next) {
+		if (vq->service)
+			create_thread(vq);
+	}
+	dev->running = true;
+}
+
+static void cleanup_devices(void)
+{
+	struct device *dev;
+
+	for (dev = devices.dev; dev; dev = dev->next)
+		reset_device(dev);
+
+	/* If we saved off the original terminal settings, restore them now. */
+	if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
+		tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
+}
+
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
+{
+	/* A zero status is a reset, otherwise it's a set of flags. */
+	if (dev->desc->status == 0)
+		reset_device(dev);
+	else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
 		warnx("Device %s configuration FAILED", dev->name);
+		if (dev->running)
+			reset_device(dev);
 	} else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
-		unsigned int i;
-
-		verbose("Device %s OK: offered", dev->name);
-		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %02x", get_feature_bits(dev)[i]);
-		verbose(", accepted");
-		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %02x", get_feature_bits(dev)
-				[dev->desc->feature_len+i]);
-
-		if (dev->ready)
-			dev->ready(dev);
+		if (!dev->running)
+			start_device(dev);
 	}
 }
 
 /* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
-static void handle_output(int fd, unsigned long addr)
+static void handle_output(unsigned long addr)
 {
 	struct device *i;
-	struct virtqueue *vq;
 
-	/* Check each device and virtqueue. */
+	/* Check each device. */
 	for (i = devices.dev; i; i = i->next) {
+		struct virtqueue *vq;
+
 		/* Notifications to device descriptors update device status. */
 		if (from_guest_phys(addr) == i->desc) {
 			update_device_status(i);
 			return;
 		}
 
-		/* Notifications to virtqueues mean output has occurred. */
+		/* Devices *can* be used before status is set to DRIVER_OK. */
 		for (vq = i->vq; vq; vq = vq->next) {
-			if (vq->config.pfn != addr/getpagesize())
+			if (addr != vq->config.pfn*getpagesize())
 				continue;
-
-			/* Guest should acknowledge (and set features!)  before
-			 * using the device. */
-			if (i->desc->status == 0) {
-				warnx("%s gave early output", i->name);
-				return;
-			}
-
-			if (strcmp(vq->dev->name, "console") != 0)
-				verbose("Output to %s\n", vq->dev->name);
-			if (vq->handle_output)
-				vq->handle_output(fd, vq, false);
+			if (i->running)
+				errx(1, "Notification on running %s", i->name);
+			start_device(i);
 			return;
 		}
 	}
@@ -1049,71 +990,6 @@ static void handle_output(int fd, unsigned long addr)
 	      strnlen(from_guest_phys(addr), guest_limit - addr));
 }
 
-static void handle_timeout(int fd)
-{
-	char buf[32];
-	struct device *i;
-	struct virtqueue *vq;
-
-	/* Clear the pipe */
-	read(timeoutpipe[0], buf, sizeof(buf));
-
-	/* Check each device and virtqueue: flush blocked ones. */
-	for (i = devices.dev; i; i = i->next) {
-		for (vq = i->vq; vq; vq = vq->next) {
-			if (!vq->blocked)
-				continue;
-
-			vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-			vq->blocked = false;
-			if (vq->handle_output)
-				vq->handle_output(fd, vq, true);
-		}
-	}
-}
-
-/* This is called when the Waker wakes us up: check for incoming file
- * descriptors. */
-static void handle_input(int fd)
-{
-	/* select() wants a zeroed timeval to mean "don't wait". */
-	struct timeval poll = { .tv_sec = 0, .tv_usec = 0 };
-
-	for (;;) {
-		struct device *i;
-		fd_set fds = devices.infds;
-		int num;
-
-		num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
-		/* Could get interrupted */
-		if (num < 0)
-			continue;
-		/* If nothing is ready, we're done. */
-		if (num == 0)
-			break;
-
-		/* Otherwise, call the device(s) which have readable file
-		 * descriptors and a method of handling them.  */
-		for (i = devices.dev; i; i = i->next) {
-			if (i->handle_input && FD_ISSET(i->fd, &fds)) {
-				if (i->handle_input(fd, i))
-					continue;
-
-				/* If handle_input() returns false, it means we
-				 * should no longer service it.  Networking and
-				 * console do this when there's no input
-				 * buffers to deliver into.  Console also uses
-				 * it when it discovers that stdin is closed. */
-				FD_CLR(i->fd, &devices.infds);
-			}
-		}
-
-		/* Is this the timeout fd? */
-		if (FD_ISSET(timeoutpipe[0], &fds))
-			handle_timeout(fd);
-	}
-}
-
 /*L:190
  * Device Setup
  *
@@ -1129,8 +1005,8 @@ static void handle_input(int fd)
 static u8 *device_config(const struct device *dev)
 {
 	return (void *)(dev->desc + 1)
-		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig)
-		+ dev->desc->feature_len * 2;
+		+ dev->num_vq * sizeof(struct lguest_vqconfig)
+		+ dev->feature_len * 2;
 }
 
 /* This routine allocates a new "struct lguest_device_desc" from descriptor
@@ -1159,7 +1035,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 /* Each device descriptor is followed by the description of its virtqueues.  We
  * specify how many descriptors the virtqueue is to have. */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
-			  void (*handle_output)(int, struct virtqueue *, bool))
+			  void (*service)(struct virtqueue *))
 {
 	unsigned int pages;
 	struct virtqueue **i, *vq = malloc(sizeof(*vq));
@@ -1174,8 +1050,8 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
-	vq->inflight = 0;
-	vq->blocked = false;
+	vq->service = service;
+	vq->thread = (pid_t)-1;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1191,6 +1067,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	 * yet, otherwise we'd be overwriting them. */
 	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
 	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+	dev->num_vq++;
 	dev->desc->num_vq++;
 
 	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
@@ -1199,15 +1076,6 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	 * second.  */
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
-
-	/* Set the routine to call when the Guest does something to this
-	 * virtqueue. */
-	vq->handle_output = handle_output;
-
-	/* As an optimization, set the advisory "Don't Notify Me" flag if we
-	 * don't have a handler */
-	if (!handle_output)
-		vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
 }
 
 /* The first half of the feature bitmask is for us to advertise features.  The
@@ -1219,7 +1087,7 @@ static void add_feature(struct device *dev, unsigned bit)
 	/* We can't extend the feature bits once we've added config bytes */
 	if (dev->desc->feature_len <= bit / CHAR_BIT) {
 		assert(dev->desc->config_len == 0);
-		dev->desc->feature_len = (bit / CHAR_BIT) + 1;
+		dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
 	}
 
 	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
@@ -1243,22 +1111,17 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
  * calling new_dev_desc() to allocate the descriptor and device memory.
  *
  * See what I mean about userspace being boring? */
-static struct device *new_device(const char *name, u16 type, int fd,
-				 bool (*handle_input)(int, struct device *))
+static struct device *new_device(const char *name, u16 type)
 {
 	struct device *dev = malloc(sizeof(*dev));
 
 	/* Now we populate the fields one at a time. */
-	dev->fd = fd;
-	/* If we have an input handler for this file descriptor, then we add it
-	 * to the device_list's fdset and maxfd. */
-	if (handle_input)
-		add_device_fd(dev->fd);
 	dev->desc = new_dev_desc(type);
-	dev->handle_input = handle_input;
 	dev->name = name;
 	dev->vq = NULL;
-	dev->ready = NULL;
+	dev->feature_len = 0;
+	dev->num_vq = 0;
+	dev->running = false;
 
 	/* Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
@@ -1286,13 +1149,10 @@ static void setup_console(void)
 		 * raw input stream to the Guest. */
 		term.c_lflag &= ~(ISIG|ICANON|ECHO);
 		tcsetattr(STDIN_FILENO, TCSANOW, &term);
-		/* If we exit gracefully, the original settings will be
-		 * restored so the user can see what they're typing. */
-		atexit(restore_term);
 	}
 
-	dev = new_device("console", VIRTIO_ID_CONSOLE,
-			 STDIN_FILENO, handle_console_input);
+	dev = new_device("console", VIRTIO_ID_CONSOLE);
+
 	/* We store the console state in dev->priv, and initialize it. */
 	dev->priv = malloc(sizeof(struct console_abort));
 	((struct console_abort *)dev->priv)->count = 0;
@@ -1301,31 +1161,13 @@ static void setup_console(void)
 	 * they put something the input queue, we make sure we're listening to
 	 * stdin.  When they put something in the output queue, we write it to
 	 * stdout. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_console_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
+	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
-	verbose("device %u: console\n", devices.device_num++);
+	verbose("device %u: console\n", ++devices.device_num);
 }
 /*:*/
 
-static void timeout_alarm(int sig)
-{
-	write(timeoutpipe[1], "", 1);
-}
-
-static void setup_timeout(void)
-{
-	if (pipe(timeoutpipe) != 0)
-		err(1, "Creating timeout pipe");
-
-	if (fcntl(timeoutpipe[1], F_SETFL,
-		  fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
-		err(1, "Making timeout pipe nonblocking");
-
-	add_device_fd(timeoutpipe[0]);
-	signal(SIGALRM, timeout_alarm);
-}
-
 /*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
@@ -1447,21 +1289,23 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 static void setup_tun_net(char *arg)
 {
 	struct device *dev;
-	int netfd, ipfd;
+	struct net_info *net_info = malloc(sizeof(*net_info));
+	int ipfd;
 	u32 ip = INADDR_ANY;
 	bool bridging = false;
 	char tapif[IFNAMSIZ], *p;
 	struct virtio_net_config conf;
 
-	netfd = get_tun_device(tapif);
+	net_info->tunfd = get_tun_device(tapif);
 
 	/* First we create a new network device. */
-	dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
+	dev = new_device("net", VIRTIO_ID_NET);
+	dev->priv = net_info;
 
 	/* Network devices need a receive and a send queue, just like
 	 * console. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
 	/* We need a socket to perform the magic network ioctls to bring up the
 	 * tap interface, connect to the bridge etc.  Any socket will do! */
@@ -1502,6 +1346,8 @@ static void setup_tun_net(char *arg)
 	add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
 	add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
 	add_feature(dev, VIRTIO_NET_F_HOST_ECN);
+	/* We handle indirect ring entries */
+	add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */
@@ -1550,20 +1396,18 @@ struct vblk_info
  * Remember that the block device is handled by a separate I/O thread.  We head
  * straight into the core of that thread here:
  */
-static bool service_io(struct device *dev)
+static void blk_request(struct virtqueue *vq)
 {
-	struct vblk_info *vblk = dev->priv;
+	struct vblk_info *vblk = vq->dev->priv;
 	unsigned int head, out_num, in_num, wlen;
 	int ret;
 	u8 *in;
 	struct virtio_blk_outhdr *out;
-	struct iovec iov[dev->vq->vring.num];
+	struct iovec iov[vq->vring.num];
 	off64_t off;
 
-	/* See if there's a request waiting.  If not, nothing to do. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-	if (head == dev->vq->vring.num)
-		return false;
+	/* Get the next request. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
 	/* Every block request should contain at least one output buffer
 	 * (detailing the location on disk and the type of request) and one
@@ -1637,83 +1481,21 @@ static bool service_io(struct device *dev)
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
-	/* We can't trigger an IRQ, because we're not the Launcher.  It does
-	 * that when we tell it we're done. */
-	add_used(dev->vq, head, wlen);
-	return true;
-}
-
-/* This is the thread which actually services the I/O. */
-static int io_thread(void *_dev)
-{
-	struct device *dev = _dev;
-	struct vblk_info *vblk = dev->priv;
-	char c;
-
-	/* Close other side of workpipe so we get 0 read when main dies. */
-	close(vblk->workpipe[1]);
-	/* Close the other side of the done_fd pipe. */
-	close(dev->fd);
-
-	/* When this read fails, it means Launcher died, so we follow. */
-	while (read(vblk->workpipe[0], &c, 1) == 1) {
-		/* We acknowledge each request immediately to reduce latency,
-		 * rather than waiting until we've done them all.  I haven't
-		 * measured to see if it makes any difference.
-		 *
-		 * That would be an interesting test, wouldn't it?  You could
-		 * also try having more than one I/O thread. */
-		while (service_io(dev))
-			write(vblk->done_fd, &c, 1);
-	}
-	return 0;
-}
-
-/* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when that thread tells us it's completed some I/O. */
-static bool handle_io_finish(int fd, struct device *dev)
-{
-	char c;
-
-	/* If the I/O thread died, presumably it printed the error, so we
-	 * simply exit. */
-	if (read(dev->fd, &c, 1) != 1)
-		exit(1);
-
-	/* It did some work, so trigger the irq. */
-	trigger_irq(fd, dev->vq);
-	return true;
-}
-
-/* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
-{
-	struct vblk_info *vblk = vq->dev->priv;
-	char c = 0;
-
-	/* Wake up I/O thread and tell it to go to work! */
-	if (write(vblk->workpipe[1], &c, 1) != 1)
-		/* Presumably it indicated why it died. */
-		exit(1);
+	add_used(vq, head, wlen);
 }
 
 /*L:198 This actually sets up a virtual block device. */
 static void setup_block_file(const char *filename)
 {
-	int p[2];
 	struct device *dev;
 	struct vblk_info *vblk;
-	void *stack;
 	struct virtio_blk_config conf;
 
-	/* This is the pipe the I/O thread will use to tell us I/O is done. */
-	pipe(p);
-
 	/* The device responds to return from I/O thread. */
-	dev = new_device("block", VIRTIO_ID_BLOCK, p[0], handle_io_finish);
+	dev = new_device("block", VIRTIO_ID_BLOCK);
 
 	/* The device has one virtqueue, where the Guest places requests. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_virtblk_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
 
 	/* Allocate the room for our own bookkeeping */
 	vblk = dev->priv = malloc(sizeof(*vblk));
@@ -1735,49 +1517,29 @@ static void setup_block_file(const char *filename)
 
 	set_config(dev, sizeof(conf), &conf);
 
-	/* The I/O thread writes to this end of the pipe when done. */
-	vblk->done_fd = p[1];
-
-	/* This is the second pipe, which is how we tell the I/O thread about
-	 * more work. */
-	pipe(vblk->workpipe);
-
-	/* Create stack for thread and run it.  Since stack grows upwards, we
-	 * point the stack pointer to the end of this region. */
-	stack = malloc(32768);
-	/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
-	 * becoming a zombie. */
-	if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
-		err(1, "Creating clone");
-
-	/* We don't need to keep the I/O thread's end of the pipes open. */
-	close(vblk->done_fd);
-	close(vblk->workpipe[0]);
-
 	verbose("device %u: virtblock %llu sectors\n",
-		devices.device_num, le64_to_cpu(conf.capacity));
+		++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
+struct rng_info {
+	int rfd;
+};
+
 /* Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
  * The same logic applies, however. */
-static bool handle_rng_input(int fd, struct device *dev)
+static void rng_input(struct virtqueue *vq)
 {
 	int len;
 	unsigned int head, in_num, out_num, totlen = 0;
-	struct iovec iov[dev->vq->vring.num];
+	struct rng_info *rng_info = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
 
 	/* First we need a buffer from the Guests's virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-
-	/* If they're not ready for input, stop listening to this file
-	 * descriptor.  We'll start again once they add an input buffer. */
-	if (head == dev->vq->vring.num)
-		return false;
-
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in rng?");
 
@@ -1785,7 +1547,7 @@ static bool handle_rng_input(int fd, struct device *dev)
 	 * it reads straight into the Guest's buffer.  We loop to make sure we
 	 * fill it. */
 	while (!iov_empty(iov, in_num)) {
-		len = readv(dev->fd, iov, in_num);
+		len = readv(rng_info->rfd, iov, in_num);
 		if (len <= 0)
 			err(1, "Read from /dev/random gave %i", len);
 		iov_consume(iov, in_num, len);
@@ -1793,25 +1555,23 @@ static bool handle_rng_input(int fd, struct device *dev)
 	}
 
 	/* Tell the Guest about the new input. */
-	add_used_and_trigger(fd, dev->vq, head, totlen);
-
-	/* Everything went OK! */
-	return true;
+	add_used(vq, head, totlen);
 }
 
 /* And this creates a "hardware" random number device for the Guest. */
 static void setup_rng(void)
 {
 	struct device *dev;
-	int fd;
+	struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
-	fd = open_or_die("/dev/random", O_RDONLY);
+	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
 	/* The device responds to return from I/O thread. */
-	dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
+	dev = new_device("rng", VIRTIO_ID_RNG);
+	dev->priv = rng_info;
 
 	/* The device has one virtqueue, where the Guest places inbufs. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+	add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
 
 	verbose("device %u: rng\n", devices.device_num++);
 }
@@ -1827,17 +1587,18 @@ static void __attribute__((noreturn)) restart_guest(void)
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
 
-	/* The exec automatically gets rid of the I/O and Waker threads. */
+	/* Reset all the devices (kills all threads). */
+	cleanup_devices();
+
 	execv(main_args[0], main_args);
 	err(1, "Could not exec %s", main_args[0]);
 }
 
 /*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
  * its input and output, and finally, lays it to rest. */
-static void __attribute__((noreturn)) run_guest(int lguest_fd)
+static void __attribute__((noreturn)) run_guest(void)
 {
 	for (;;) {
-		unsigned long args[] = { LHREQ_BREAK, 0 };
 		unsigned long notify_addr;
 		int readval;
 
@@ -1848,8 +1609,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
 		/* One unsigned long means the Guest did HCALL_NOTIFY */
 		if (readval == sizeof(notify_addr)) {
 			verbose("Notify on address %#lx\n", notify_addr);
-			handle_output(lguest_fd, notify_addr);
-			continue;
+			handle_output(notify_addr);
 		/* ENOENT means the Guest died.  Reading tells us why. */
 		} else if (errno == ENOENT) {
 			char reason[1024] = { 0 };
@@ -1858,19 +1618,9 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
 		/* ERESTART means that we need to reboot the guest */
 		} else if (errno == ERESTART) {
 			restart_guest();
-		/* EAGAIN means a signal (timeout).
-		 * Anything else means a bug or incompatible change. */
-		} else if (errno != EAGAIN)
+		/* Anything else means a bug or incompatible change. */
+		} else
 			err(1, "Running guest failed");
-
-		/* Only service input on thread for CPU 0. */
-		if (cpu_id != 0)
-			continue;
-
-		/* Service input, then unset the BREAK to release the Waker. */
-		handle_input(lguest_fd);
-		if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
-			err(1, "Resetting break");
 	}
 }
 /*L:240
@@ -1904,8 +1654,8 @@ int main(int argc, char *argv[])
 	/* Memory, top-level pagetable, code startpoint and size of the
 	 * (optional) initrd. */
 	unsigned long mem = 0, start, initrd_size = 0;
-	/* Two temporaries and the /dev/lguest file descriptor. */
-	int i, c, lguest_fd;
+	/* Two temporaries. */
+	int i, c;
 	/* The boot information for the Guest. */
 	struct boot_params *boot;
 	/* If they specify an initrd file to load. */
@@ -1913,18 +1663,10 @@ int main(int argc, char *argv[])
 
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
-	/* We don't "wait" for the children, so prevent them from becoming
-	 * zombies. */
-	signal(SIGCHLD, SIG_IGN);
 
-	/* First we initialize the device list.  Since console and network
-	 * device receive input from a file descriptor, we keep an fdset
-	 * (infds) and the maximum fd number (max_infd) with the head of the
-	 * list.  We also keep a pointer to the last device.  Finally, we keep
-	 * the next interrupt number to use for devices (1: remember that 0 is
-	 * used by the timer). */
-	FD_ZERO(&devices.infds);
-	devices.max_infd = -1;
+	/* First we initialize the device list.  We keep a pointer to the last
+	 * device, and the next interrupt number to use for devices (1:
+	 * remember that 0 is used by the timer). */
 	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
@@ -1982,9 +1724,6 @@ int main(int argc, char *argv[])
 	/* We always have a console device */
 	setup_console();
 
-	/* We can timeout waiting for Guest network transmit. */
-	setup_timeout();
-
 	/* Now we load the kernel */
 	start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
 
@@ -2023,15 +1762,16 @@ int main(int argc, char *argv[])
 
 	/* We tell the kernel to initialize the Guest: this returns the open
 	 * /dev/lguest file descriptor. */
-	lguest_fd = tell_kernel(start);
+	tell_kernel(start);
+
+	/* Ensure that we terminate if a child dies. */
+	signal(SIGCHLD, kill_launcher);
 
-	/* We clone off a thread, which wakes the Launcher whenever one of the
-	 * input file descriptors needs attention.  We call this the Waker, and
-	 * we'll cover it in a moment. */
-	setup_waker(lguest_fd);
+	/* If we exit via err(), this kills all the threads, restores tty. */
+	atexit(cleanup_devices);
 
 	/* Finally, run the Guest.  This doesn't return. */
-	run_guest(lguest_fd);
+	run_guest();
 }
 /*:*/
 
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 28c747362f9..efb3a6a045a 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -37,7 +37,6 @@ Running Lguest:
      "Paravirtualized guest support" = Y
         "Lguest guest support" = Y
      "High Memory Support" = off/4GB
-     "PAE (Physical Address Extension) Support" = N
      "Alignment value to which kernel should be aligned" = 0x100000
         (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
          CONFIG_PHYSICAL_ALIGN=0x100000)
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 23045b8b50f..300da4bdfdb 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -34,7 +34,7 @@ out of order wrt other memory writes by the owner CPU.
 
 It can be done by slightly modifying the standard atomic operations : only
 their UP variant must be kept. It typically means removing LOCK prefix (on
-i386 and x86_64) and any SMP sychronization barrier. If the architecture does
+i386 and x86_64) and any SMP synchronization barrier. If the architecture does
 not have a different behavior between SMP and UP, including asm-generic/local.h
 in your architecture's local.h is sufficient.
 
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 4c2ecf537a4..bbc8a6a3692 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -73,13 +73,13 @@ this phase is triggered automatically. ACPI can notify this event. If not,
 (see Section 4.).
 
 Logical Memory Hotplug phase is to change memory state into
-avaiable/unavailable for users. Amount of memory from user's view is
+available/unavailable for users. Amount of memory from user's view is
 changed by this phase. The kernel makes all memory in it as free pages
 when a memory range is available.
 
 In this document, this phase is described as online/offline.
 
-Logical Memory Hotplug phase is triggred by write of sysfs file by system
+Logical Memory Hotplug phase is triggered by write of sysfs file by system
 administrator. For the hot-add case, it must be executed after Physical Hotplug
 phase by hand.
 (However, if you writes udev's hotplug scripts for memory hotplug, these
@@ -334,7 +334,7 @@ MEMORY_CANCEL_ONLINE
   Generated if MEMORY_GOING_ONLINE fails.
 
 MEMORY_ONLINE
-  Generated when memory has succesfully brought online. The callback may
+  Generated when memory has successfully brought online. The callback may
   allocate pages from the new memory.
 
 MEMORY_GOING_OFFLINE
@@ -359,7 +359,7 @@ The third argument is passed by pointer of struct memory_notify.
 struct memory_notify {
        unsigned long start_pfn;
        unsigned long nr_pages;
-       int status_cahnge_nid;
+       int status_change_nid;
 }
 
 start_pfn is start_pfn of online/offline memory.
diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
index 1fef1f06dfd..d3507bad428 100644
--- a/Documentation/mn10300/ABI.txt
+++ b/Documentation/mn10300/ABI.txt
@@ -26,7 +26,7 @@ registers and the stack. If the first argument is a 64-bit value, it will be
 passed in D0:D1. If the first argument is not a 64-bit value, but the second
 is, the second will be passed entirely on the stack and D1 will be unused.
 
-Arguments smaller than 32-bits are not coelesced within a register or a stack
+Arguments smaller than 32-bits are not coalesced within a register or a stack
 word. For example, two byte-sized arguments will always be passed in separate
 registers or word-sized stack slots.
 
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt
index bdf93b7f0f2..274821b35a7 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.txt
@@ -50,7 +50,7 @@ byte 255:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp5 ... rp15
            cp5  cp5  cp5  cp5  cp4  cp4  cp4  cp4
 
 This figure represents a sector of 256 bytes.
-cp is my abbreviaton for column parity, rp for row parity.
+cp is my abbreviation for column parity, rp for row parity.
 
 Let's start to explain column parity.
 cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
@@ -560,7 +560,7 @@ Measuring this code again showed big gain. When executing the original
 linux code 1 million times, this took about 1 second on my system.
 (using time to measure the performance). After this iteration I was back
 to 0.075 sec. Actually I had to decide to start measuring over 10
-million interations in order not to loose too much accuracy. This one
+million iterations in order not to lose too much accuracy. This one
 definitely seemed to be the jackpot!
 
 There is a little bit more room for improvement though. There are three
@@ -571,8 +571,8 @@ loop; This eliminates 3 statements per loop. Of course after the loop we
 need to correct by adding:
     rp4 ^= rp4_6;
     rp6 ^= rp4_6
-Furthermore there are 4 sequential assingments to rp8. This can be
-encoded slightly more efficient by saving tmppar before those 4 lines
+Furthermore there are 4 sequential assignments to rp8. This can be
+encoded slightly more efficiently by saving tmppar before those 4 lines
 and later do rp8 = rp8 ^ tmppar ^ notrp8;
 (where notrp8 is the value of rp8 before those 4 lines).
 Again a use of the commutative property of xor.
@@ -622,7 +622,7 @@ Not a big change, but every penny counts :-)
 Analysis 7
 ==========
 
-Acutally this made things worse. Not very much, but I don't want to move
+Actually this made things worse. Not very much, but I don't want to move
 into the wrong direction. Maybe something to investigate later. Could
 have to do with caching again.
 
@@ -642,7 +642,7 @@ Analysis 8
 This makes things worse. Let's stick with attempt 6 and continue from there.
 Although it seems that the code within the loop cannot be optimised
 further there is still room to optimize the generation of the ecc codes.
-We can simply calcualate the total parity. If this is 0 then rp4 = rp5
+We can simply calculate the total parity. If this is 0 then rp4 = rp5
 etc. If the parity is 1, then rp4 = !rp5;
 But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
 in the result byte and then do something like
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 08762750f12..d5181ce9ff6 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -221,7 +221,7 @@ ad_select
 
 		- Any slave's 802.3ad association state changes
 
-		- The bond's adminstrative state changes to up
+		- The bond's administrative state changes to up
 
 	count or 2
 
@@ -369,7 +369,7 @@ fail_over_mac
 		When this policy is used in conjuction with the mii
 		monitor, devices which assert link up prior to being
 		able to actually transmit and receive are particularly
-		susecptible to loss of the gratuitous ARP, and an
+		susceptible to loss of the gratuitous ARP, and an
 		appropriate updelay setting may be required.
 
 	follow or 2
@@ -1794,7 +1794,7 @@ target to query.
 generally referred to as "trunk failover."  This is a feature of the
 switch that causes the link state of a particular switch port to be set
 down (or up) when the state of another switch port goes down (or up).
-It's purpose is to propogate link failures from logically "exterior" ports
+Its purpose is to propagate link failures from logically "exterior" ports
 to the logically "interior" ports that bonding is able to monitor via
 miimon.  Availability and configuration for trunk failover varies by
 switch, but this can be a viable alternative to the ARP monitor when using
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 2035bc4932f..cd79735013f 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -36,10 +36,15 @@ This file contains
     6.2 local loopback of sent frames
     6.3 CAN controller hardware filters
     6.4 The virtual CAN driver (vcan)
-    6.5 currently supported CAN hardware
-    6.6 todo
+    6.5 The CAN network device driver interface
+      6.5.1 Netlink interface to set/get devices properties
+      6.5.2 Setting the CAN bit-timing
+      6.5.3 Starting and stopping the CAN network device
+    6.6 supported CAN hardware
 
-  7 Credits
+  7 Socket CAN resources
+
+  8 Credits
 
 ============================================================================
 
@@ -234,6 +239,8 @@ solution for a couple of reasons:
   the user application using the common CAN filter mechanisms. Inside
   this filter definition the (interested) type of errors may be
   selected. The reception of error frames is disabled by default.
+  The format of the CAN error frame is briefly decribed in the Linux
+  header file "include/linux/can/error.h".
 
 4. How to use Socket CAN
 ------------------------
@@ -327,7 +334,7 @@ solution for a couple of reasons:
             return 1;
     }
 
-    /* paraniod check ... */
+    /* paranoid check ... */
     if (nbytes < sizeof(struct can_frame)) {
             fprintf(stderr, "read: incomplete CAN frame\n");
             return 1;
@@ -605,61 +612,213 @@ solution for a couple of reasons:
   removal of vcan network devices can be managed with the ip(8) tool:
 
   - Create a virtual CAN network interface:
-       ip link add type vcan
+       $ ip link add type vcan
 
   - Create a virtual CAN network interface with a specific name 'vcan42':
-       ip link add dev vcan42 type vcan
+       $ ip link add dev vcan42 type vcan
 
   - Remove a (virtual CAN) network interface 'vcan42':
-       ip link del vcan42
-
-  The tool 'vcan' from the SocketCAN SVN repository on BerliOS is obsolete.
-
-  Virtual CAN network device creation in older Kernels:
-  In Linux Kernel versions < 2.6.24 the vcan driver creates 4 vcan
-  netdevices at module load time by default. This value can be changed
-  with the module parameter 'numdev'. E.g. 'modprobe vcan numdev=8'
-
-  6.5 currently supported CAN hardware
+       $ ip link del vcan42
+
+  6.5 The CAN network device driver interface
+
+  The CAN network device driver interface provides a generic interface
+  to setup, configure and monitor CAN network devices. The user can then
+  configure the CAN device, like setting the bit-timing parameters, via
+  the netlink interface using the program "ip" from the "IPROUTE2"
+  utility suite. The following chapter describes briefly how to use it.
+  Furthermore, the interface uses a common data structure and exports a
+  set of common functions, which all real CAN network device drivers
+  should use. Please have a look to the SJA1000 or MSCAN driver to
+  understand how to use them. The name of the module is can-dev.ko.
+
+  6.5.1 Netlink interface to set/get devices properties
+
+  The CAN device must be configured via netlink interface. The supported
+  netlink message types are defined and briefly described in
+  "include/linux/can/netlink.h". CAN link support for the program "ip"
+  of the IPROUTE2 utility suite is avaiable and it can be used as shown
+  below:
+
+  - Setting CAN device properties:
+
+    $ ip link set can0 type can help
+    Usage: ip link set DEVICE type can
+    	[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
+    	[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
+     	  phase-seg2 PHASE-SEG2 [ sjw SJW ] ]
+
+    	[ loopback { on | off } ]
+    	[ listen-only { on | off } ]
+    	[ triple-sampling { on | off } ]
+
+    	[ restart-ms TIME-MS ]
+    	[ restart ]
+
+    	Where: BITRATE       := { 1..1000000 }
+    	       SAMPLE-POINT  := { 0.000..0.999 }
+    	       TQ            := { NUMBER }
+    	       PROP-SEG      := { 1..8 }
+    	       PHASE-SEG1    := { 1..8 }
+    	       PHASE-SEG2    := { 1..8 }
+    	       SJW           := { 1..4 }
+    	       RESTART-MS    := { 0 | NUMBER }
+
+  - Display CAN device details and statistics:
+
+    $ ip -details -statistics link show can0
+    2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP qlen 10
+      link/can
+      can <TRIPLE-SAMPLING> state ERROR-ACTIVE restart-ms 100
+      bitrate 125000 sample_point 0.875
+      tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
+      sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+      clock 8000000
+      re-started bus-errors arbit-lost error-warn error-pass bus-off
+      41         17457      0          41         42         41
+      RX: bytes  packets  errors  dropped overrun mcast
+      140859     17608    17457   0       0       0
+      TX: bytes  packets  errors  dropped carrier collsns
+      861        112      0       41      0       0
+
+  More info to the above output:
+
+    "<TRIPLE-SAMPLING>"
+	Shows the list of selected CAN controller modes: LOOPBACK,
+	LISTEN-ONLY, or TRIPLE-SAMPLING.
+
+    "state ERROR-ACTIVE"
+	The current state of the CAN controller: "ERROR-ACTIVE",
+	"ERROR-WARNING", "ERROR-PASSIVE", "BUS-OFF" or "STOPPED"
+
+    "restart-ms 100"
+	Automatic restart delay time. If set to a non-zero value, a
+	restart of the CAN controller will be triggered automatically
+	in case of a bus-off condition after the specified delay time
+	in milliseconds. By default it's off.
+
+    "bitrate 125000 sample_point 0.875"
+	Shows the real bit-rate in bits/sec and the sample-point in the
+	range 0.000..0.999. If the calculation of bit-timing parameters
+	is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the
+	bit-timing can be defined by setting the "bitrate" argument.
+	Optionally the "sample-point" can be specified. By default it's
+	0.000 assuming CIA-recommended sample-points.
+
+    "tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1"
+	Shows the time quanta in ns, propagation segment, phase buffer
+	segment 1 and 2 and the synchronisation jump width in units of
+	tq. They allow to define the CAN bit-timing in a hardware
+	independent format as proposed by the Bosch CAN 2.0 spec (see
+	chapter 8 of http://www.semiconductors.bosch.de/pdf/can2spec.pdf).
+
+    "sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+     clock 8000000"
+	Shows the bit-timing constants of the CAN controller, here the
+	"sja1000". The minimum and maximum values of the time segment 1
+	and 2, the synchronisation jump width in units of tq, the
+	bitrate pre-scaler and the CAN system clock frequency in Hz.
+	These constants could be used for user-defined (non-standard)
+	bit-timing calculation algorithms in user-space.
+
+    "re-started bus-errors arbit-lost error-warn error-pass bus-off"
+	Shows the number of restarts, bus and arbitration lost errors,
+	and the state changes to the error-warning, error-passive and
+	bus-off state. RX overrun errors are listed in the "overrun"
+	field of the standard network statistics.
+
+  6.5.2 Setting the CAN bit-timing
+
+  The CAN bit-timing parameters can always be defined in a hardware
+  independent format as proposed in the Bosch CAN 2.0 specification
+  specifying the arguments "tq", "prop_seg", "phase_seg1", "phase_seg2"
+  and "sjw":
+
+    $ ip link set canX type can tq 125 prop-seg 6 \
+				phase-seg1 7 phase-seg2 2 sjw 1
+
+  If the kernel option CONFIG_CAN_CALC_BITTIMING is enabled, CIA
+  recommended CAN bit-timing parameters will be calculated if the bit-
+  rate is specified with the argument "bitrate":
+
+    $ ip link set canX type can bitrate 125000
+
+  Note that this works fine for the most common CAN controllers with
+  standard bit-rates but may *fail* for exotic bit-rates or CAN system
+  clock frequencies. Disabling CONFIG_CAN_CALC_BITTIMING saves some
+  space and allows user-space tools to solely determine and set the
+  bit-timing parameters. The CAN controller specific bit-timing
+  constants can be used for that purpose. They are listed by the
+  following command:
+
+    $ ip -details link show can0
+    ...
+      sja1000: clock 8000000 tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+
+  6.5.3 Starting and stopping the CAN network device
+
+  A CAN network device is started or stopped as usual with the command
+  "ifconfig canX up/down" or "ip link set canX up/down". Be aware that
+  you *must* define proper bit-timing parameters for real CAN devices
+  before you can start it to avoid error-prone default settings:
+
+    $ ip link set canX up type can bitrate 125000
+
+  A device may enter the "bus-off" state if too much errors occurred on
+  the CAN bus. Then no more messages are received or sent. An automatic
+  bus-off recovery can be enabled by setting the "restart-ms" to a
+  non-zero value, e.g.:
+
+    $ ip link set canX type can restart-ms 100
+
+  Alternatively, the application may realize the "bus-off" condition
+  by monitoring CAN error frames and do a restart when appropriate with
+  the command:
+
+    $ ip link set canX type can restart
+
+  Note that a restart will also create a CAN error frame (see also
+  chapter 3.4).
 
-  On the project website http://developer.berlios.de/projects/socketcan
-  there are different drivers available:
+  6.6 Supported CAN hardware
 
-    vcan:    Virtual CAN interface driver (if no real hardware is available)
-    sja1000: Philips SJA1000 CAN controller (recommended)
-    i82527:  Intel i82527 CAN controller
-    mscan:   Motorola/Freescale CAN controller (e.g. inside SOC MPC5200)
-    ccan:    CCAN controller core (e.g. inside SOC h7202)
-    slcan:   For a bunch of CAN adaptors that are attached via a
-             serial line ASCII protocol (for serial / USB adaptors)
+  Please check the "Kconfig" file in "drivers/net/can" to get an actual
+  list of the support CAN hardware. On the Socket CAN project website
+  (see chapter 7) there might be further drivers available, also for
+  older kernel versions.
 
-  Additionally the different CAN adaptors (ISA/PCI/PCMCIA/USB/Parport)
-  from PEAK Systemtechnik support the CAN netdevice driver model
-  since Linux driver v6.0: http://www.peak-system.com/linux/index.htm
+7. Socket CAN resources
+-----------------------
 
-  Please check the Mailing Lists on the berlios OSS project website.
+  You can find further resources for Socket CAN like user space tools,
+  support for old kernel versions, more drivers, mailing lists, etc.
+  at the BerliOS OSS project website for Socket CAN:
 
-  6.6 todo
+    http://developer.berlios.de/projects/socketcan
 
-  The configuration interface for CAN network drivers is still an open
-  issue that has not been finalized in the socketcan project. Also the
-  idea of having a library module (candev.ko) that holds functions
-  that are needed by all CAN netdevices is not ready to ship.
-  Your contribution is welcome.
+  If you have questions, bug fixes, etc., don't hesitate to post them to
+  the Socketcan-Users mailing list. But please search the archives first.
 
-7. Credits
+8. Credits
 ----------
 
-  Oliver Hartkopp (PF_CAN core, filters, drivers, bcm)
+  Oliver Hartkopp (PF_CAN core, filters, drivers, bcm, SJA1000 driver)
   Urs Thuermann (PF_CAN core, kernel integration, socket interfaces, raw, vcan)
   Jan Kizka (RT-SocketCAN core, Socket-API reconciliation)
-  Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews)
+  Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews,
+                       CAN device driver interface, MSCAN driver)
   Robert Schwebel (design reviews, PTXdist integration)
   Marc Kleine-Budde (design reviews, Kernel 2.6 cleanups, drivers)
   Benedikt Spranger (reviews)
   Thomas Gleixner (LKML reviews, coding style, posting hints)
-  Andrey Volkov (kernel subtree structure, ioctls, mscan driver)
+  Andrey Volkov (kernel subtree structure, ioctls, MSCAN driver)
   Matthias Brukner (first SJA1000 CAN netdevice implementation Q2/2003)
   Klaus Hitschler (PEAK driver integration)
   Uwe Koppe (CAN netdevices with PF_PACKET approach)
   Michael Schulze (driver layer loopback requirement, RT CAN drivers review)
+  Pavel Pisa (Bit-timing calculation)
+  Sascha Hauer (SJA1000 platform driver)
+  Sebastian Haas (SJA1000 EMS PCI driver)
+  Markus Plessing (SJA1000 EMS PCI driver)
+  Per Dalen (SJA1000 Kvaser PCI driver)
+  Sam Ravnborg (reviews, coding style, kbuild help)
diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/dm9000.txt
index 65df3dea556..5552e2e575c 100644
--- a/Documentation/networking/dm9000.txt
+++ b/Documentation/networking/dm9000.txt
@@ -129,7 +129,7 @@ PHY Link state polling
 ----------------------
 
 The driver keeps track of the link state and informs the network core
-about link (carrier) availablilty. This is managed by several methods
+about link (carrier) availability. This is managed by several methods
 depending on the version of the chip and on which PHY is being used.
 
 For the internal PHY, the original (and currently default) method is
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
new file mode 100644
index 00000000000..a0280ad2edc
--- /dev/null
+++ b/Documentation/networking/ieee802154.txt
@@ -0,0 +1,76 @@
+
+		Linux IEEE 802.15.4 implementation
+
+
+Introduction
+============
+
+The Linux-ZigBee project goal is to provide complete implementation
+of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
+of protocols for organizing Low-Rate Wireless Personal Area Networks.
+
+Currently only IEEE 802.15.4 layer is implemented. We have choosen
+to use plain Berkeley socket API, the generic Linux networking stack
+to transfer IEEE 802.15.4 messages and a special protocol over genetlink
+for configuration/management
+
+
+Socket API
+==========
+
+int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
+.....
+
+The address family, socket addresses etc. are defined in the
+include/net/ieee802154/af_ieee802154.h header or in the special header
+in our userspace package (see either linux-zigbee sourceforge download page
+or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
+
+One can use SOCK_RAW for passing raw data towards device xmit function. YMMV.
+
+
+MLME - MAC Level Management
+============================
+
+Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
+See the include/net/ieee802154/nl802154.h header. Our userspace tools package
+(see above) provides CLI configuration utility for radio interfaces and simple
+coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
+
+
+Kernel side
+=============
+
+Like with WiFi, there are several types of devices implementing IEEE 802.15.4.
+1) 'HardMAC'. The MAC layer is implemented in the device itself, the device
+   exports MLME and data API.
+2) 'SoftMAC' or just radio. These types of devices are just radio transceivers
+   possibly with some kinds of acceleration like automatic CRC computation and
+   comparation, automagic ACK handling, address matching, etc.
+
+Those types of devices require different approach to be hooked into Linux kernel.
+
+
+HardMAC
+=======
+
+See the header include/net/ieee802154/netdevice.h. You have to implement Linux
+net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
+code via plain sk_buffs. The control block of sk_buffs will contain additional
+info as described in the struct ieee802154_mac_cb.
+
+To hook the MLME interface you have to populate the ml_priv field of your
+net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are
+required.
+
+We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c
+
+
+SoftMAC
+=======
+
+We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC
+in software. This is currently WIP.
+
+See header include/net/ieee802154/mac802154.h and several drivers in
+drivers/ieee802154/
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index b121c5db707..8be76235fe6 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -168,7 +168,16 @@ tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
 tcp_ecn - BOOLEAN
-	Enable Explicit Congestion Notification in TCP.
+	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
+	used when both ends of the TCP flow support it. It is useful to
+	avoid losses due to congestion (when the bottleneck router supports
+	ECN).
+	Possible values are:
+		0 disable ECN
+		1 ECN enabled
+		2 Only server-side ECN enabled. If the other end does
+		  not support ECN, behavior is like with ECN disabled.
+	Default: 2
 
 tcp_fack - BOOLEAN
 	Enable FACK congestion avoidance and fast retransmission.
@@ -1048,6 +1057,13 @@ disable_ipv6 - BOOLEAN
 	address.
 	Default: FALSE (enable IPv6 operation)
 
+	When this value is changed from 1 to 0 (IPv6 is being enabled),
+	it will dynamically create a link-local address on the given
+	interface and start Duplicate Address Detection, if necessary.
+
+	When this value is changed from 0 to 1 (IPv6 is being disabled),
+	it will dynamically delete all address on the given interface.
+
 accept_dad - INTEGER
 	Whether to accept DAD (Duplicate Address Detection).
 	0: Disable DAD
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
index 268e5c103dd..9fd7e21296c 100644
--- a/Documentation/networking/ipv6.txt
+++ b/Documentation/networking/ipv6.txt
@@ -33,3 +33,40 @@ disable
 
 		A reboot is required to enable IPv6.
 
+autoconf
+
+	Specifies whether to enable IPv6 address autoconfiguration
+	on all interfaces.  This might be used when one does not wish
+	for addresses to be automatically generated from prefixes
+	received in Router Advertisements.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 address autoconfiguration is disabled on all interfaces.
+
+		Only the IPv6 loopback address (::1) and link-local addresses
+		will be added to interfaces.
+
+	1
+		IPv6 address autoconfiguration is enabled on all interfaces.
+
+		This is the default value.
+
+disable_ipv6
+
+	Specifies whether to disable IPv6 on all interfaces.
+	This might be used when no IPv6 addresses are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled on all interfaces.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled on all interfaces.
+
+		No IPv6 addresses will be added to interfaces.
+
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
index 2451f551c50..63214b280e0 100644
--- a/Documentation/networking/l2tp.txt
+++ b/Documentation/networking/l2tp.txt
@@ -158,7 +158,7 @@ Sample Userspace Code
         }
         return 0;
 
-Miscellanous
+Miscellaneous
 ============
 
 The PPPoL2TP driver was developed as part of the OpenL2TP project by
diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt
index 84906ef3ed6..b30e81ad530 100644
--- a/Documentation/networking/mac80211-injection.txt
+++ b/Documentation/networking/mac80211-injection.txt
@@ -12,38 +12,22 @@ following format:
 The radiotap format is discussed in
 ./Documentation/networking/radiotap-headers.txt.
 
-Despite 13 radiotap argument types are currently defined, most only make sense
+Despite many radiotap parameters being currently defined, most only make sense
 to appear on received packets.  The following information is parsed from the
 radiotap headers and used to control injection:
 
- * IEEE80211_RADIOTAP_RATE
-
-   rate in 500kbps units, automatic if invalid or not present
-
-
- * IEEE80211_RADIOTAP_ANTENNA
-
-   antenna to use, automatic if not present
-
-
- * IEEE80211_RADIOTAP_DBM_TX_POWER
-
-   transmit power in dBm, automatic if not present
-
-
  * IEEE80211_RADIOTAP_FLAGS
 
    IEEE80211_RADIOTAP_F_FCS: FCS will be removed and recalculated
    IEEE80211_RADIOTAP_F_WEP: frame will be encrypted if key available
    IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the
-			      current fragmentation threshold. Note that
-			      this flag is only reliable when software
-			      fragmentation is enabled)
+			      current fragmentation threshold.
+
 
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.
 
-Here is an example valid radiotap header defining these three parameters
+Here is an example valid radiotap header defining some parameters
 
 	0x00, 0x00, // <-- radiotap version
 	0x0b, 0x00, // <- radiotap header length
@@ -72,8 +56,8 @@ interface), along the following lines:
 ...
 	r = pcap_inject(ppcap, u8aSendBuffer, nLength);
 
-You can also find sources for a complete inject test applet here:
+You can also find a link to a complete inject application here:
 
-http://penumbra.warmcat.com/_twk/tiki-index.php?page=packetspammer
+http://wireless.kernel.org/en/users/Documentation/packetspammer
 
 Andy Green <andy@warmcat.com>
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index a2ab6a0b116..87b3d15f523 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -74,7 +74,7 @@ dev->hard_start_xmit:
 	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
 	set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
-	Dont use it for new drivers.
+	Don't use it for new drivers.
 
 	Context: Process with BHs disabled or BH (timer),
 	         will be called with interrupts disabled by netconsole.
diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt
index c9074f9b78b..1a77a3cfae5 100644
--- a/Documentation/networking/operstates.txt
+++ b/Documentation/networking/operstates.txt
@@ -38,9 +38,6 @@ ifinfomsg::if_flags & IFF_LOWER_UP:
 ifinfomsg::if_flags & IFF_DORMANT:
  Driver has signaled netif_dormant_on()
 
-These interface flags can also be queried without netlink using the
-SIOCGIFFLAGS ioctl.
-
 TLV IFLA_OPERSTATE
 
 contains RFC2863 state of the interface in numeric representation:
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 07c53d59603..a22fd85e379 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -4,16 +4,18 @@
 
 This file documents the CONFIG_PACKET_MMAP option available with the PACKET
 socket interface on 2.4 and 2.6 kernels. This type of sockets is used for 
-capture network traffic with utilities like tcpdump or any other that uses 
-the libpcap library. 
-
-You can find the latest version of this document at
+capture network traffic with utilities like tcpdump or any other that needs
+raw access to network interface.
 
+You can find the latest version of this document at:
     http://pusa.uv.es/~ulisses/packet_mmap/
 
-Please send me your comments to
+Howto can be found at:
+    http://wiki.gnu-log.net (packet_mmap)
 
+Please send your comments to
     Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es>
+    Johann Baudy <johann.baudy@gnu-log.net>
 
 -------------------------------------------------------------------------------
 + Why use PACKET_MMAP
@@ -25,19 +27,24 @@ to capture each packet, it requires two if you want to get packet's
 timestamp (like libpcap always does).
 
 In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size 
-configurable circular buffer mapped in user space. This way reading packets just 
-needs to wait for them, most of the time there is no need to issue a single 
-system call. By using a shared buffer between the kernel and the user 
-also has the benefit of minimizing packet copies.
-
-It's fine to use PACKET_MMAP to improve the performance of the capture process, 
-but it isn't everything. At least, if you are capturing at high speeds (this 
-is relative to the cpu speed), you should check if the device driver of your 
-network interface card supports some sort of interrupt load mitigation or 
-(even better) if it supports NAPI, also make sure it is enabled.
+configurable circular buffer mapped in user space that can be used to either
+send or receive packets. This way reading packets just needs to wait for them,
+most of the time there is no need to issue a single system call. Concerning
+transmission, multiple packets can be sent through one system call to get the
+highest bandwidth.
+By using a shared buffer between the kernel and the user also has the benefit
+of minimizing packet copies.
+
+It's fine to use PACKET_MMAP to improve the performance of the capture and
+transmission process, but it isn't everything. At least, if you are capturing
+at high speeds (this is relative to the cpu speed), you should check if the
+device driver of your network interface card supports some sort of interrupt
+load mitigation or (even better) if it supports NAPI, also make sure it is
+enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
+supported by devices of your network.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP
++ How to use CONFIG_PACKET_MMAP to improve capture process
 --------------------------------------------------------------------------------
 
 From the user standpoint, you should use the higher level libpcap library, which
@@ -57,7 +64,7 @@ the low level details or want to improve libpcap by including PACKET_MMAP
 support.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly
++ How to use CONFIG_PACKET_MMAP directly to improve capture process
 --------------------------------------------------------------------------------
 
 From the system calls stand point, the use of PACKET_MMAP involves
@@ -66,6 +73,7 @@ the following process:
 
 [setup]     socket() -------> creation of the capture socket
             setsockopt() ---> allocation of the circular buffer (ring)
+                              option: PACKET_RX_RING
             mmap() ---------> mapping of the allocated buffer to the
                               user process
 
@@ -97,13 +105,75 @@ also the mapping of the circular buffer in the user process and
 the use of this buffer.
 
 --------------------------------------------------------------------------------
++ How to use CONFIG_PACKET_MMAP directly to improve transmission process
+--------------------------------------------------------------------------------
+Transmission process is similar to capture as shown below.
+
+[setup]          socket() -------> creation of the transmission socket
+                 setsockopt() ---> allocation of the circular buffer (ring)
+                                   option: PACKET_TX_RING
+                 bind() ---------> bind transmission socket with a network interface
+                 mmap() ---------> mapping of the allocated buffer to the
+                                   user process
+
+[transmission]   poll() ---------> wait for free packets (optional)
+                 send() ---------> send all packets that are set as ready in
+                                   the ring
+                                   The flag MSG_DONTWAIT can be used to return
+                                   before end of transfer.
+
+[shutdown]  close() --------> destruction of the transmission socket and
+                              deallocation of all associated resources.
+
+Binding the socket to your network interface is mandatory (with zero copy) to
+know the header size of frames used in the circular buffer.
+
+As capture, each frame contains two parts:
+
+ --------------------
+| struct tpacket_hdr | Header. It contains the status of
+|                    | of this frame
+|--------------------|
+| data buffer        |
+.                    .  Data that will be sent over the network interface.
+.                    .
+ --------------------
+
+ bind() associates the socket to your network interface thanks to
+ sll_ifindex parameter of struct sockaddr_ll.
+
+ Initialization example:
+
+ struct sockaddr_ll my_addr;
+ struct ifreq s_ifr;
+ ...
+
+ strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name));
+
+ /* get interface index of eth0 */
+ ioctl(this->socket, SIOCGIFINDEX, &s_ifr);
+
+ /* fill sockaddr_ll struct to prepare binding */
+ my_addr.sll_family = AF_PACKET;
+ my_addr.sll_protocol = ETH_P_ALL;
+ my_addr.sll_ifindex =  s_ifr.ifr_ifindex;
+
+ /* bind socket to eth0 */
+ bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll));
+
+ A complete tutorial is available at: http://wiki.gnu-log.net/
+
+--------------------------------------------------------------------------------
 + PACKET_MMAP settings
 --------------------------------------------------------------------------------
 
 
 To setup PACKET_MMAP from user level code is done with a call like
 
+ - Capture process
      setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
+ - Transmission process
+     setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req))
 
 The most significant argument in the previous call is the req parameter, 
 this parameter must to have the following structure:
@@ -117,11 +187,11 @@ this parameter must to have the following structure:
     };
 
 This structure is defined in /usr/include/linux/if_packet.h and establishes a 
-circular buffer (ring) of unswappable memory mapped in the capture process. 
+circular buffer (ring) of unswappable memory.
 Being mapped in the capture process allows reading the captured frames and 
 related meta-information like timestamps without requiring a system call.
 
-Captured frames are grouped in blocks. Each block is a physically contiguous 
+Frames are grouped in blocks. Each block is a physically contiguous
 region of memory and holds tp_block_size/tp_frame_size frames. The total number 
 of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because
 
@@ -336,6 +406,7 @@ struct tpacket_hdr). If this field is 0 means that the frame is ready
 to be used for the kernel, If not, there is a frame the user can read 
 and the following flags apply:
 
++++ Capture process:
      from include/linux/if_packet.h
 
      #define TP_STATUS_COPY          2 
@@ -391,6 +462,37 @@ packets are in the ring:
 It doesn't incur in a race condition to first check the status value and 
 then poll for frames.
 
+
+++ Transmission process
+Those defines are also used for transmission:
+
+     #define TP_STATUS_AVAILABLE        0 // Frame is available
+     #define TP_STATUS_SEND_REQUEST     1 // Frame will be sent on next send()
+     #define TP_STATUS_SENDING          2 // Frame is currently in transmission
+     #define TP_STATUS_WRONG_FORMAT     4 // Frame format is not correct
+
+First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a
+packet, the user fills a data buffer of an available frame, sets tp_len to
+current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST.
+This can be done on multiple frames. Once the user is ready to transmit, it
+calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are
+forwarded to the network device. The kernel updates each status of sent
+frames with TP_STATUS_SENDING until the end of transfer.
+At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE.
+
+    header->tp_len = in_i_size;
+    header->tp_status = TP_STATUS_SEND_REQUEST;
+    retval = send(this->socket, NULL, 0, 0);
+
+The user can also use poll() to check if a buffer is available:
+(status == TP_STATUS_SENDING)
+
+    struct pollfd pfd;
+    pfd.fd = fd;
+    pfd.revents = 0;
+    pfd.events = POLLOUT;
+    retval = poll(&pfd, 1, timeout);
+
 --------------------------------------------------------------------------------
 + THANKS
 --------------------------------------------------------------------------------
diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 6a07e45d4a9..6e8ce09f9c7 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -36,7 +36,7 @@ Phonet packets have a common header as follows:
 On Linux, the link-layer header includes the pn_media byte (see below).
 The next 7 bytes are part of the network-layer header.
 
-The device ID is split: the 6 higher-order bits consitute the device
+The device ID is split: the 6 higher-order bits constitute the device
 address, while the 2 lower-order bits are used for multiplexing, as are
 the 8-bit object identifiers. As such, Phonet can be considered as a
 network layer with 6 bits of address space and 10 bits for transport
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index dcf31648414..eaa1a25946c 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -89,7 +89,7 @@ added to this document when its support is enabled.
 Device drivers who provide their own built regulatory domain
 do not need a callback as the channels registered by them are
 the only ones that will be allowed and therefore *additional*
-cannels cannot be enabled.
+channels cannot be enabled.
 
 Example code - drivers hinting an alpha2:
 ------------------------------------------
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 421e7d00ffd..c9abbd86bc1 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -75,9 +75,6 @@ may need to apply in domain-specific ways to their devices:
 struct bus_type {
 	...
 	int  (*suspend)(struct device *dev, pm_message_t state);
-	int  (*suspend_late)(struct device *dev, pm_message_t state);
-
-	int  (*resume_early)(struct device *dev);
 	int  (*resume)(struct device *dev);
 };
 
@@ -226,20 +223,7 @@ The phases are seen by driver notifications issued in this order:
 
 	This call should handle parts of device suspend logic that require
 	sleeping.  It probably does work to quiesce the device which hasn't
-	been abstracted into class.suspend() or bus.suspend_late().
-
-   3	bus.suspend_late(dev, message) is called with IRQs disabled, and
-	with only one CPU active.  Until the bus.resume_early() phase
-	completes (see later), IRQs are not enabled again.  This method
-	won't be exposed by all busses; for message based busses like USB,
-	I2C, or SPI, device interactions normally require IRQs.  This bus
-	call may be morphed into a driver call with bus-specific parameters.
-
-	This call might save low level hardware state that might otherwise
-	be lost in the upcoming low power state, and actually put the
-	device into a low power state ... so that in some cases the device
-	may stay partly usable until this late.  This "late" call may also
-	help when coping with hardware that behaves badly.
+	been abstracted into class.suspend().
 
 The pm_message_t parameter is currently used to refine those semantics
 (described later).
@@ -351,19 +335,11 @@ devices processing each phase's calls before the next phase begins.
 
 The phases are seen by driver notifications issued in this order:
 
-   1	bus.resume_early(dev) is called with IRQs disabled, and with
-   	only one CPU active.  As with bus.suspend_late(), this method
-	won't be supported on busses that require IRQs in order to
-	interact with devices.
-
-	This reverses the effects of bus.suspend_late().
-
-   2	bus.resume(dev) is called next.  This may be morphed into a device
-   	driver call with bus-specific parameters; implementations may sleep.
-
-	This reverses the effects of bus.suspend().
+   1	bus.resume(dev) reverses the effects of bus.suspend().  This may
+	be morphed into a device driver call with bus-specific parameters;
+	implementations may sleep.
 
-   3	class.resume(dev) is called for devices associated with a class
+   2	class.resume(dev) is called for devices associated with a class
 	that has such a method.  Implementations may sleep.
 
 	This reverses the effects of class.suspend(), and would usually
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 82b7a43aadb..5f83fd24ea8 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -178,5 +178,5 @@ Consumers can uregister interest by calling :-
 int regulator_unregister_notifier(struct regulator *regulator,
 				struct notifier_block *nb);
 
-Regulators use the kernel notifier framework to send event to thier interested
+Regulators use the kernel notifier framework to send event to their interested
 consumers.
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index bdcb332bd7f..0cded696ca0 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -119,7 +119,7 @@ Some terms used in this document:-
                    battery power, USB power)
 
                    Regulator Domains: is the new current limit within the
-                   regulator operating parameters for input/ouput voltage.
+                   regulator operating parameters for input/output voltage.
 
                    If the regulator request passes all the constraint tests
                    then the new regulator value is applied.
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 2ebdc6091ce..514b94fc931 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -63,7 +63,7 @@ hardware during resume operations where a value can be set that will
 survive a reboot.
 
 Consequence is that after a resume (even if it is successful) your system
-clock will have a value corresponding to the magic mumber instead of the
+clock will have a value corresponding to the magic number instead of the
 correct date/time! It is therefore advisable to use a program like ntp-date
 or rdate to reset the correct date/time from an external time source when
 using this trace option.
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 7b99636564c..b967cd9137d 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -109,7 +109,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
 still frozen when the device is being closed).
 
 Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap parition, called the resume
+snapshot image from/to the kernel will use a swap partition, called the resume
 partition, or a swap file as storage space (if a swap file is used, the resume
 partition is the partition that holds this file).  However, this is not really
 required, as they can use, for example, a special (blank) suspend partition or
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d16b7a1c379..8d999d862d0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1356,7 +1356,7 @@ platforms are moved over to use the flattened-device-tree model.
     - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
 			  for, used if phy-address is absent. bit 0x00000001 is
 			  MDIO address 0.
-			  For Axon it can be absent, thouugh my current driver
+			  For Axon it can be absent, though my current driver
 			  doesn't handle phy-address yet so for now, keep
 			  0x00ffffff in it.
     - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
@@ -1438,7 +1438,7 @@ platforms are moved over to use the flattened-device-tree model.
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellanious
+   of standard device types (network, serial, etc.) and miscellaneous
    devices (gpio, LCD, spi, etc).  Also, since these devices are
    implemented within the fpga fabric every instance of the device can be
    synthesised with different options that change the behaviour.
diff --git a/Documentation/powerpc/dts-bindings/can/sja1000.txt b/Documentation/powerpc/dts-bindings/can/sja1000.txt
new file mode 100644
index 00000000000..d6d209ded93
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/can/sja1000.txt
@@ -0,0 +1,53 @@
+Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+Required properties:
+
+- compatible : should be "nxp,sja1000".
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the SJA1000. The size is usually 0x80.
+
+- interrupts: property with a value describing the interrupt source
+	(number and sensitivity) required for the SJA1000.
+
+Optional properties:
+
+- nxp,external-clock-frequency : Frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	SJA1000 is half of that value. If not specified, a default value
+	of 16000000 (16 MHz) is used.
+
+- nxp,tx-output-mode : operation mode of the TX output control logic:
+	<0x0> : bi-phase output mode
+	<0x1> : normal output mode (default)
+	<0x2> : test output mode
+	<0x3> : clock output mode
+
+- nxp,tx-output-config : TX output pin configuration:
+	<0x01> : TX0 invert
+	<0x02> : TX0 pull-down (default)
+	<0x04> : TX0 pull-up
+	<0x06> : TX0 push-pull
+	<0x08> : TX1 invert
+	<0x10> : TX1 pull-down
+	<0x20> : TX1 pull-up
+	<0x30> : TX1 push-pull
+
+- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- nxp,no-comparator-bypass : Allows to disable the CAN input comperator.
+
+For futher information, please have a look to the SJA1000 data sheet.
+
+Examples:
+
+can@3,100 {
+	compatible = "nxp,sja1000";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	nxp,external-clock-frequency = <16000000>;
+};
+
diff --git a/Documentation/powerpc/dts-bindings/ecm.txt b/Documentation/powerpc/dts-bindings/ecm.txt
new file mode 100644
index 00000000000..f514f29c67d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/ecm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,ecm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+      CHIP is the processor (mpc8572, mpc8544, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+   - interrupt-parent
+      Usage: required
+      Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d28eeb..e8b5bc24d0a 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
 - reg : Should contain the address and the length of the GPIO bank
   register.
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
index 088fc471e03..160c752484b 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
@@ -19,7 +19,7 @@ Example:
 	reg = <119c0 30>;
      }
 
-* Properties common to mulitple CPM/QE devices
+* Properties common to multiple CPM/QE devices
 
 - fsl,cpm-command : This value is ORed with the opcode and command flag
                     to specify the device on which a CPM command operates.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfede1b..349f79fd707 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
   "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
   "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 78790d58dc2..6e37be1eeb2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -17,6 +17,9 @@ Required properties:
 - model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
 - reg : offset and length of the device registers.
 - bus-frequency : the clock frequency for QUICC Engine.
+- fsl,qe-num-riscs: define how many RISC engines the QE has.
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+  threads.
 
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 60084655776..5093ddf900d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -5,8 +5,7 @@ for MMC, SD, and SDIO types of memory cards.
 
 Required properties:
   - compatible : should be
-    "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
-    "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+    "fsl,<chip>-esdhc", "fsl,esdhc"
   - reg : should contain eSDHC registers location and length.
   - interrupts : should contain eSDHC interrupt.
   - interrupt-parent : interrupt source phandle.
@@ -15,7 +14,7 @@ Required properties:
 Example:
 
 sdhci@2e000 {
-	compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+	compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 	reg = <0x2e000 0x1000>;
 	interrupts = <42 0x8>;
 	interrupt-parent = <&ipic>;
diff --git a/Documentation/powerpc/dts-bindings/fsl/mcm.txt b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
new file mode 100644
index 00000000000..4ceda9b3b41
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,mcm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+      CHIP is the processor (mpc8641, mpc8610, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+   - interrupt-parent
+      Usage: required
+      Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
index b26b91992c5..bcc30bac683 100644
--- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
@@ -1,6 +1,6 @@
 * Freescale MSI interrupt controller
 
-Reguired properities:
+Required properties:
 - compatible : compatible list, contains 2 entries,
   first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
index 02f6f43ee1b..07256b7ffca 100644
--- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -15,8 +15,8 @@ Properties:
   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
   apply to "fsl,mpc8641d-pmc".
 
-  Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
-  bit assigments are indicated via the sleep specifier in each device's
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
   sleep property.
 
 - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 06da4d4b44f..2031ddb33d0 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -225,7 +225,7 @@ For example, to match the 8323, revision 1.0:
      soc.major = 1
      soc.minor = 0
 
-'padding' is neccessary for structure alignment.  This field ensures that the
+'padding' is necessary for structure alignment.  This field ensures that the
 'extended_modes' field is aligned on a 64-bit boundary.
 
 'extended_modes' is a bitfield that defines special functionality which has an
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 7224459b469..aae8355d316 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -131,8 +131,8 @@ Example:
   	}
 
   	/* Add new node and rebalance tree. */
-  	rb_link_node(data->node, parent, new);
-  	rb_insert_color(data->node, root);
+  	rb_link_node(&data->node, parent, new);
+  	rb_insert_color(&data->node, root);
 
 	return TRUE;
   }
@@ -146,10 +146,10 @@ To remove an existing node from a tree, call:
 
 Example:
 
-  struct mytype *data = mysearch(mytree, "walrus");
+  struct mytype *data = mysearch(&mytree, "walrus");
 
   if (data) {
-  	rb_erase(data->node, mytree);
+  	rb_erase(&data->node, &mytree);
   	myfree(data);
   }
 
@@ -188,5 +188,5 @@ Example:
 
   struct rb_node *node;
   for (node = rb_first(&mytree); node; node = rb_next(node))
-  	printk("key=%s\n", rb_entry(node, int, keystring));
+	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
 
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 4d3ee317a4a..1b74b5f30af 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -1,575 +1,136 @@
-rfkill - RF switch subsystem support
-====================================
+rfkill - RF kill switch support
+===============================
 
-1 Introduction
-2 Implementation details
-3 Kernel driver guidelines
-3.1 wireless device drivers
-3.2 platform/switch drivers
-3.3 input device drivers
-4 Kernel API
-5 Userspace support
+1. Introduction
+2. Implementation details
+3. Kernel driver guidelines
+4. Kernel API
+5. Userspace support
 
 
-1. Introduction:
+1. Introduction
 
-The rfkill switch subsystem exists to add a generic interface to circuitry that
-can enable or disable the signal output of a wireless *transmitter* of any
-type.  By far, the most common use is to disable radio-frequency transmitters.
+The rfkill subsystem provides a generic interface to disabling any radio
+transmitter in the system. When a transmitter is blocked, it shall not
+radiate any power.
 
-Note that disabling the signal output means that the the transmitter is to be
-made to not emit any energy when "blocked".  rfkill is not about blocking data
-transmissions, it is about blocking energy emission.
+The subsystem also provides the ability to react on button presses and
+disable all transmitters of a certain type (or all). This is intended for
+situations where transmitters need to be turned off, for example on
+aircraft.
 
-The rfkill subsystem offers support for keys and switches often found on
-laptops to enable wireless devices like WiFi and Bluetooth, so that these keys
-and switches actually perform an action in all wireless devices of a given type
-attached to the system.
 
-The buttons to enable and disable the wireless transmitters are important in
-situations where the user is for example using his laptop on a location where
-radio-frequency transmitters _must_ be disabled (e.g. airplanes).
 
-Because of this requirement, userspace support for the keys should not be made
-mandatory.  Because userspace might want to perform some additional smarter
-tasks when the key is pressed, rfkill provides userspace the possibility to
-take over the task to handle the key events.
-
-===============================================================================
-2: Implementation details
+2. Implementation details
 
 The rfkill subsystem is composed of various components: the rfkill class, the
 rfkill-input module (an input layer handler), and some specific input layer
 events.
 
-The rfkill class provides kernel drivers with an interface that allows them to
-know when they should enable or disable a wireless network device transmitter.
-This is enabled by the CONFIG_RFKILL Kconfig option.
-
-The rfkill class support makes sure userspace will be notified of all state
-changes on rfkill devices through uevents.  It provides a notification chain
-for interested parties in the kernel to also get notified of rfkill state
-changes in other drivers.  It creates several sysfs entries which can be used
-by userspace.  See section "Userspace support".
-
-The rfkill-input module provides the kernel with the ability to implement a
-basic response when the user presses a key or button (or toggles a switch)
-related to rfkill functionality.  It is an in-kernel implementation of default
-policy of reacting to rfkill-related input events and neither mandatory nor
-required for wireless drivers to operate.  It is enabled by the
-CONFIG_RFKILL_INPUT Kconfig option.
-
-rfkill-input is a rfkill-related events input layer handler.  This handler will
-listen to all rfkill key events and will change the rfkill state of the
-wireless devices accordingly.  With this option enabled userspace could either
-do nothing or simply perform monitoring tasks.
-
-The rfkill-input module also provides EPO (emergency power-off) functionality
-for all wireless transmitters.  This function cannot be overridden, and it is
-always active.  rfkill EPO is related to *_RFKILL_ALL input layer events.
-
-
-Important terms for the rfkill subsystem:
-
-In order to avoid confusion, we avoid the term "switch" in rfkill when it is
-referring to an electronic control circuit that enables or disables a
-transmitter.  We reserve it for the physical device a human manipulates
-(which is an input device, by the way):
-
-rfkill switch:
-
-	A physical device a human manipulates.  Its state can be perceived by
-	the kernel either directly (through a GPIO pin, ACPI GPE) or by its
-	effect on a rfkill line of a wireless device.
-
-rfkill controller:
-
-	A hardware circuit that controls the state of a rfkill line, which a
-	kernel driver can interact with *to modify* that state (i.e. it has
-	either write-only or read/write access).
-
-rfkill line:
-
-	An input channel (hardware or software) of a wireless device, which
-	causes a wireless transmitter to stop emitting energy (BLOCK) when it
-	is active.  Point of view is extremely important here: rfkill lines are
-	always seen from the PoV of a wireless device (and its driver).
-
-soft rfkill line/software rfkill line:
-
-	A rfkill line the wireless device driver can directly change the state
-	of.  Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED.
-
-hard rfkill line/hardware rfkill line:
-
-	A rfkill line that works fully in hardware or firmware, and that cannot
-	be overridden by the kernel driver.  The hardware device or the
-	firmware just exports its status to the driver, but it is read-only.
-	Related to rfkill_state RFKILL_STATE_HARD_BLOCKED.
-
-The enum rfkill_state describes the rfkill state of a transmitter:
-
-When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state,
-the wireless transmitter (radio TX circuit for example) is *enabled*.  When the
-it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the
-wireless transmitter is to be *blocked* from operating.
-
-RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change
-that state.  RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio()
-will not be able to change the state and will return with a suitable error if
-attempts are made to set the state to RFKILL_STATE_UNBLOCKED.
-
-RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is
-locked in the BLOCKED state by a hardwire rfkill line (typically an input pin
-that, when active, forces the transmitter to be disabled) which the driver
-CANNOT override.
-
-Full rfkill functionality requires two different subsystems to cooperate: the
-input layer and the rfkill class.  The input layer issues *commands* to the
-entire system requesting that devices registered to the rfkill class change
-state.  The way this interaction happens is not complex, but it is not obvious
-either:
-
-Kernel Input layer:
-
-	* Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and
-	  other such events when the user presses certain keys, buttons, or
-	  toggles certain physical switches.
-
-	THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE
-	KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT.  It is
-	used to issue *commands* for the system to change behaviour, and these
-	commands may or may not be carried out by some kernel driver or
-	userspace application.  It follows that doing user feedback based only
-	on input events is broken, as there is no guarantee that an input event
-	will be acted upon.
-
-	Most wireless communication device drivers implementing rfkill
-	functionality MUST NOT generate these events, and have no reason to
-	register themselves with the input layer.  Doing otherwise is a common
-	misconception.  There is an API to propagate rfkill status change
-	information, and it is NOT the input layer.
-
-rfkill class:
-
-	* Calls a hook in a driver to effectively change the wireless
-	  transmitter state;
-	* Keeps track of the wireless transmitter state (with help from
-	  the driver);
-	* Generates userspace notifications (uevents) and a call to a
-	  notification chain (kernel) when there is a wireless transmitter
-	  state change;
-	* Connects a wireless communications driver with the common rfkill
-	  control system, which, for example, allows actions such as
-	  "switch all bluetooth devices offline" to be carried out by
-	  userspace or by rfkill-input.
-
-	THE RFKILL CLASS NEVER ISSUES INPUT EVENTS.  THE RFKILL CLASS DOES
-	NOT LISTEN TO INPUT EVENTS.  NO DRIVER USING THE RFKILL CLASS SHALL
-	EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS.  Doing otherwise is
-	a layering violation.
-
-	Most wireless data communication drivers in the kernel have just to
-	implement the rfkill class API to work properly.  Interfacing to the
-	input layer is not often required (and is very often a *bug*) on
-	wireless drivers.
-
-	Platform drivers often have to attach to the input layer to *issue*
-	(but never to listen to) rfkill events for rfkill switches, and also to
-	the rfkill class to export a control interface for the platform rfkill
-	controllers to the rfkill subsystem.  This does NOT mean the rfkill
-	switch is attached to a rfkill class (doing so is almost always wrong).
-	It just means the same kernel module is the driver for different
-	devices (rfkill switches and rfkill controllers).
-
-
-Userspace input handlers (uevents) or kernel input handlers (rfkill-input):
-
-	* Implements the policy of what should happen when one of the input
-	  layer events related to rfkill operation is received.
-	* Uses the sysfs interface (userspace) or private rfkill API calls
-	  to tell the devices registered with the rfkill class to change
-	  their state (i.e. translates the input layer event into real
-	  action).
-
-	* rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0
-	  (power off all transmitters) in a special way: it ignores any
-	  overrides and local state cache and forces all transmitters to the
-	  RFKILL_STATE_SOFT_BLOCKED state (including those which are already
-	  supposed to be BLOCKED).
-	* rfkill EPO will remain active until rfkill-input receives an
-	  EV_SW SW_RFKILL_ALL 1 event.  While the EPO is active, transmitters
-	  are locked in the blocked state (rfkill will refuse to unblock them).
-	* rfkill-input implements different policies that the user can
-	  select for handling EV_SW SW_RFKILL_ALL 1.  It will unlock rfkill,
-	  and either do nothing (leave transmitters blocked, but now unlocked),
-	  restore the transmitters to their state before the EPO, or unblock
-	  them all.
-
-Userspace uevent handler or kernel platform-specific drivers hooked to the
-rfkill notifier chain:
-
-	* Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents,
-	  in order to know when a device that is registered with the rfkill
-	  class changes state;
-	* Issues feedback notifications to the user;
-	* In the rare platforms where this is required, synthesizes an input
-	  event to command all *OTHER* rfkill devices to also change their
-	  statues when a specific rfkill device changes state.
-
-
-===============================================================================
-3: Kernel driver guidelines
-
-Remember: point-of-view is everything for a driver that connects to the rfkill
-subsystem.  All the details below must be measured/perceived from the point of
-view of the specific driver being modified.
-
-The first thing one needs to know is whether his driver should be talking to
-the rfkill class or to the input layer.  In rare cases (platform drivers), it
-could happen that you need to do both, as platform drivers often handle a
-variety of devices in the same driver.
-
-Do not mistake input devices for rfkill controllers.  The only type of "rfkill
-switch" device that is to be registered with the rfkill class are those
-directly controlling the circuits that cause a wireless transmitter to stop
-working (or the software equivalent of them), i.e. what we call a rfkill
-controller.  Every other kind of "rfkill switch" is just an input device and
-MUST NOT be registered with the rfkill class.
-
-A driver should register a device with the rfkill class when ALL of the
-following conditions are met (they define a rfkill controller):
-
-1. The device is/controls a data communications wireless transmitter;
-
-2. The kernel can interact with the hardware/firmware to CHANGE the wireless
-   transmitter state (block/unblock TX operation);
-
-3. The transmitter can be made to not emit any energy when "blocked":
-   rfkill is not about blocking data transmissions, it is about blocking
-   energy emission;
-
-A driver should register a device with the input subsystem to issue
-rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX,
-SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met:
-
-1. It is directly related to some physical device the user interacts with, to
-   command the O.S./firmware/hardware to enable/disable a data communications
-   wireless transmitter.
-
-   Examples of the physical device are: buttons, keys and switches the user
-   will press/touch/slide/switch to enable or disable the wireless
-   communication device.
-
-2. It is NOT slaved to another device, i.e. there is no other device that
-   issues rfkill-related input events in preference to this one.
-
-   Please refer to the corner cases and examples section for more details.
-
-When in doubt, do not issue input events.  For drivers that should generate
-input events in some platforms, but not in others (e.g. b43), the best solution
-is to NEVER generate input events in the first place.  That work should be
-deferred to a platform-specific kernel module (which will know when to generate
-events through the rfkill notifier chain) or to userspace.  This avoids the
-usual maintenance problems with DMI whitelisting.
-
-
-Corner cases and examples:
-====================================
-
-1. If the device is an input device that, because of hardware or firmware,
-causes wireless transmitters to be blocked regardless of the kernel's will, it
-is still just an input device, and NOT to be registered with the rfkill class.
-
-2. If the wireless transmitter switch control is read-only, it is an input
-device and not to be registered with the rfkill class (and maybe not to be made
-an input layer event source either, see below).
-
-3. If there is some other device driver *closer* to the actual hardware the
-user interacted with (the button/switch/key) to issue an input event, THAT is
-the device driver that should be issuing input events.
-
-E.g:
-  [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input]
-                           (platform driver)    (wireless card driver)
-
-The user is closer to the RFKILL slide switch plaform driver, so the driver
-which must issue input events is the platform driver looking at the GPIO
-hardware, and NEVER the wireless card driver (which is just a slave).  It is
-very likely that there are other leaves than just the WLAN card rf-kill input
-(e.g. a bluetooth card, etc)...
-
-On the other hand, some embedded devices do this:
-
-  [RFKILL slider switch] -- [WLAN card rf-kill input]
-                             (wireless card driver)
-
-In this situation, the wireless card driver *could* register itself as an input
-device and issue rf-kill related input events... but in order to AVOID the need
-for DMI whitelisting, the wireless card driver does NOT do it.  Userspace (HAL)
-or a platform driver (that exists only on these embedded devices) will do the
-dirty job of issuing the input events.
-
-
-COMMON MISTAKES in kernel drivers, related to rfkill:
-====================================
-
-1. NEVER confuse input device keys and buttons with input device switches.
-
-  1a. Switches are always set or reset.  They report the current state
-      (on position or off position).
-
-  1b. Keys and buttons are either in the pressed or not-pressed state, and
-      that's it.  A "button" that latches down when you press it, and
-      unlatches when you press it again is in fact a switch as far as input
-      devices go.
-
-Add the SW_* events you need for switches, do NOT try to emulate a button using
-KEY_* events just because there is no such SW_* event yet.  Do NOT try to use,
-for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead.
-
-2. Input device switches (sources of EV_SW events) DO store their current state
-(so you *must* initialize it by issuing a gratuitous input layer event on
-driver start-up and also when resuming from sleep), and that state CAN be
-queried from userspace through IOCTLs.  There is no sysfs interface for this,
-but that doesn't mean you should break things trying to hook it to the rfkill
-class to get a sysfs interface :-)
-
-3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the
-correct event for your switch/button.  These events are emergency power-off
-events when they are trying to turn the transmitters off.  An example of an
-input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill
-switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch.
-An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by
-default, is any sort of hot key that is type-specific (e.g. the one for WLAN).
-
-
-3.1 Guidelines for wireless device drivers
-------------------------------------------
-
-(in this text, rfkill->foo means the foo field of struct rfkill).
-
-1. Each independent transmitter in a wireless device (usually there is only one
-transmitter per device) should have a SINGLE rfkill class attached to it.
-
-2. If the device does not have any sort of hardware assistance to allow the
-driver to rfkill the device, the driver should emulate it by taking all actions
-required to silence the transmitter.
-
-3. If it is impossible to silence the transmitter (i.e. it still emits energy,
-even if it is just in brief pulses, when there is no data to transmit and there
-is no hardware support to turn it off) do NOT lie to the users.  Do not attach
-it to a rfkill class.  The rfkill subsystem does not deal with data
-transmission, it deals with energy emission.  If the transmitter is emitting
-energy, it is not blocked in rfkill terms.
-
-4. It doesn't matter if the device has multiple rfkill input lines affecting
-the same transmitter, their combined state is to be exported as a single state
-per transmitter (see rule 1).
-
-This rule exists because users of the rfkill subsystem expect to get (and set,
-when possible) the overall transmitter rfkill state, not of a particular rfkill
-line.
-
-5. The wireless device driver MUST NOT leave the transmitter enabled during
-suspend and hibernation unless:
+The rfkill class is provided for kernel drivers to register their radio
+transmitter with the kernel, provide methods for turning it on and off and,
+optionally, letting the system know about hardware-disabled states that may
+be implemented on the device. This code is enabled with the CONFIG_RFKILL
+Kconfig option, which drivers can "select".
 
-	5.1. The transmitter has to be enabled for some sort of functionality
-	like wake-on-wireless-packet or autonomous packed forwarding in a mesh
-	network, and that functionality is enabled for this suspend/hibernation
-	cycle.
+The rfkill class code also notifies userspace of state changes, this is
+achieved via uevents. It also provides some sysfs files for userspace to
+check the status of radio transmitters. See the "Userspace support" section
+below.
 
-AND
 
-	5.2. The device was not on a user-requested BLOCKED state before
-	the suspend (i.e. the driver must NOT unblock a device, not even
-	to support wake-on-wireless-packet or remain in the mesh).
+The rfkill-input code implements a basic response to rfkill buttons -- it
+implements turning on/off all devices of a certain class (or all).
 
-In other words, there is absolutely no allowed scenario where a driver can
-automatically take action to unblock a rfkill controller (obviously, this deals
-with scenarios where soft-blocking or both soft and hard blocking is happening.
-Scenarios where hardware rfkill lines are the only ones blocking the
-transmitter are outside of this rule, since the wireless device driver does not
-control its input hardware rfkill lines in the first place).
+When the device is hard-blocked (either by a call to rfkill_set_hw_state()
+or from query_hw_block) set_block() will be invoked but drivers can well
+ignore the method call since they can use the return value of the function
+rfkill_set_hw_state() to sync the software state instead of keeping track
+of calls to set_block().
 
-6. During resume, rfkill will try to restore its previous state.
 
-7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio
-until it is resumed.
+The entire functionality is spread over more than one subsystem:
 
+ * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and
+   SW_RFKILL_ALL -- when the user presses a button. Drivers for radio
+   transmitters generally do not register to the input layer, unless the
+   device really provides an input device (i.e. a button that has no
+   effect other than generating a button press event)
 
-Example of a WLAN wireless driver connected to the rfkill subsystem:
---------------------------------------------------------------------
+ * The rfkill-input code hooks up to these events and switches the soft-block
+   of the various radio transmitters, depending on the button type.
 
-A certain WLAN card has one input pin that causes it to block the transmitter
-and makes the status of that input pin available (only for reading!) to the
-kernel driver.  This is a hard rfkill input line (it cannot be overridden by
-the kernel driver).
+ * The rfkill drivers turn off/on their transmitters as requested.
 
-The card also has one PCI register that, if manipulated by the driver, causes
-it to block the transmitter.  This is a soft rfkill input line.
+ * The rfkill class will generate userspace notifications (uevents) to tell
+   userspace what the current state is.
 
-It has also a thermal protection circuitry that shuts down its transmitter if
-the card overheats, and makes the status of that protection available (only for
-reading!) to the kernel driver.  This is also a hard rfkill input line.
 
-If either one of these rfkill lines are active, the transmitter is blocked by
-the hardware and forced offline.
 
-The driver should allocate and attach to its struct device *ONE* instance of
-the rfkill class (there is only one transmitter).
+3. Kernel driver guidelines
 
-It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if
-either one of its two hard rfkill input lines are active.  If the two hard
-rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
-rfkill input line is active.  Only if none of the rfkill input lines are
-active, will it return RFKILL_STATE_UNBLOCKED.
 
-Since the device has a hardware rfkill line, it IS subject to state changes
-external to rfkill.  Therefore, the driver must make sure that it calls
-rfkill_force_state() to keep the status always up-to-date, and it must do a
-rfkill_force_state() on resume from sleep.
+Drivers for radio transmitters normally implement only the rfkill class.
+These drivers may not unblock the transmitter based on own decisions, they
+should act on information provided by the rfkill class only.
 
-Every time the driver gets a notification from the card that one of its rfkill
-lines changed state (polling might be needed on badly designed cards that don't
-generate interrupts for such events), it recomputes the rfkill state as per
-above, and calls rfkill_force_state() to update it.
+Platform drivers might implement input devices if the rfkill button is just
+that, a button. If that button influences the hardware then you need to
+implement an rfkill class instead. This also applies if the platform provides
+a way to turn on/off the transmitter(s).
 
-The driver should implement the toggle_radio() hook, that:
+During suspend/hibernation, transmitters should only be left enabled when
+wake-on wlan or similar functionality requires it and the device wasn't
+blocked before suspend/hibernate. Note that it may be necessary to update
+the rfkill subsystem's idea of what the current state is at resume time if
+the state may have changed over suspend.
 
-1. Returns an error if one of the hardware rfkill lines are active, and the
-caller asked for RFKILL_STATE_UNBLOCKED.
 
-2. Activates the soft rfkill line if the caller asked for state
-RFKILL_STATE_SOFT_BLOCKED.  It should do this even if one of the hard rfkill
-lines are active, effectively double-blocking the transmitter.
 
-3. Deactivates the soft rfkill line if none of the hardware rfkill lines are
-active and the caller asked for RFKILL_STATE_UNBLOCKED.
-
-===============================================================================
-4: Kernel API
+4. Kernel API
 
 To build a driver with rfkill subsystem support, the driver should depend on
-(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT.
+(or select) the Kconfig symbol RFKILL.
 
 The hardware the driver talks to may be write-only (where the current state
 of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
-The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often, but
-it does not do any polling, so it is not enough on hardware that is subject
-to state changes outside of the rfkill subsystem.
-
-Therefore, calling rfkill_force_state() when a state change happens is
-mandatory when the device has a hardware rfkill line, or when something else
-like the firmware could cause its state to be changed without going through the
-rfkill class.
-
-Some hardware provides events when its status changes.  In these cases, it is
-best for the driver to not provide a get_state hook, and instead register the
-rfkill class *already* with the correct status, and keep it updated using
-rfkill_force_state() when it gets an event from the hardware.
-
-rfkill_force_state() must be used on the device resume handlers to update the
-rfkill status, should there be any chance of the device status changing during
-the sleep.
-
-There is no provision for a statically-allocated rfkill struct.  You must
-use rfkill_allocate() to allocate one.
-
-You should:
-	- rfkill_allocate()
-	- modify rfkill fields (flags, name)
-	- modify state to the current hardware state (THIS IS THE ONLY TIME
-	  YOU CAN ACCESS state DIRECTLY)
-	- rfkill_register()
-
-The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through
-a suitable return of get_state() or through rfkill_force_state().
+Calling rfkill_set_hw_state() when a state change happens is required from
+rfkill drivers that control devices that can be hard-blocked unless they also
+assign the poll_hw_block() callback (then the rfkill core will poll the
+device). Don't do this unless you cannot get the event in any other way.
 
-When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch
-it to a different state is through a suitable return of get_state() or through
-rfkill_force_state().
 
-If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED
-when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should
-not return an error.  Instead, it should try to double-block the transmitter,
-so that its state will change from RFKILL_STATE_HARD_BLOCKED to
-RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease.
-
-Please refer to the source for more documentation.
-
-===============================================================================
-5: Userspace support
-
-rfkill devices issue uevents (with an action of "change"), with the following
-environment variables set:
-
-RFKILL_NAME
-RFKILL_STATE
-RFKILL_TYPE
 
-The ABI for these variables is defined by the sysfs attributes.  It is best
-to take a quick look at the source to make sure of the possible values.
+5. Userspace support
 
-It is expected that HAL will trap those, and bridge them to DBUS, etc.  These
-events CAN and SHOULD be used to give feedback to the user about the rfkill
-status of the system.
-
-Input devices may issue events that are related to rfkill.  These are the
-various KEY_* events and SW_* events supported by rfkill-input.c.
-
-******IMPORTANT******
-When rfkill-input is ACTIVE, userspace is NOT TO CHANGE THE STATE OF AN RFKILL
-SWITCH IN RESPONSE TO AN INPUT EVENT also handled by rfkill-input, unless it
-has set to true the user_claim attribute for that particular switch.  This rule
-is *absolute*; do NOT violate it.
-******IMPORTANT******
-
-Userspace must not assume it is the only source of control for rfkill switches.
-Their state CAN and WILL change due to firmware actions, direct user actions,
-and the rfkill-input EPO override for *_RFKILL_ALL.
-
-When rfkill-input is not active, userspace must initiate a rfkill status
-change by writing to the "state" attribute in order for anything to happen.
-
-Take particular care to implement EV_SW SW_RFKILL_ALL properly.  When that
-switch is set to OFF, *every* rfkill device *MUST* be immediately put into the
-RFKILL_STATE_SOFT_BLOCKED state, no questions asked.
-
-The following sysfs entries will be created:
+The following sysfs entries exist for every rfkill device:
 
 	name: Name assigned by driver to this key (interface or driver name).
 	type: Name of the key type ("wlan", "bluetooth", etc).
 	state: Current state of the transmitter
 		0: RFKILL_STATE_SOFT_BLOCKED
-			transmitter is forced off, but one can override it
-			by a write to the state attribute;
+			transmitter is turned off by software
 		1: RFKILL_STATE_UNBLOCKED
-			transmiter is NOT forced off, and may operate if
-			all other conditions for such operation are met
-			(such as interface is up and configured, etc);
+			transmitter is (potentially) active
 		2: RFKILL_STATE_HARD_BLOCKED
 			transmitter is forced off by something outside of
-			the driver's control.  One cannot set a device to
-			this state through writes to the state attribute;
-	claim: 1: Userspace handles events, 0: Kernel handles events
-
-Both the "state" and "claim" entries are also writable. For the "state" entry
-this means that when 1 or 0 is written, the device rfkill state (if not yet in
-the requested state), will be will be toggled accordingly.
-
-For the "claim" entry writing 1 to it means that the kernel no longer handles
-key events even though RFKILL_INPUT input was enabled. When "claim" has been
-set to 0, userspace should make sure that it listens for the input events or
-check the sysfs "state" entry regularly to correctly perform the required tasks
-when the rkfill key is pressed.
-
-A note about input devices and EV_SW events:
-
-In order to know the current state of an input device switch (like
-SW_RFKILL_ALL), you will need to use an IOCTL.  That information is not
-available through sysfs in a generic way at this time, and it is not available
-through the rfkill class AT ALL.
+			the driver's control.
+	claim: 0: Kernel handles events (currently always reads that value)
+
+rfkill devices also issue uevents (with an action of "change"), with the
+following environment variables set:
+
+RFKILL_NAME
+RFKILL_STATE
+RFKILL_TYPE
+
+The contents of these variables corresponds to the "name", "state" and
+"type" sysfs files explained above.
+
+An alternative userspace interface exists as a misc device /dev/rfkill,
+which allows userspace to obtain and set the state of rfkill devices and
+sets of devices. It also notifies userspace about device addition and
+removal. The API is a simple read/write API that is defined in
+linux/rfkill.h.
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 10711d9f078..1eb576a023b 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -1984,7 +1984,7 @@ break *$pc
 
 break *0x400618
 
-heres a really useful one for large programs
+Here's a really useful one for large programs
 rbr
 Set a breakpoint for all functions matching REGEXP
 e.g.
@@ -2211,7 +2211,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
 #5  0x51692c in readline_internal () at readline.c:521
 #6  0x5164fe in readline (prompt=0x7ffff810 "\177ÿøx\177ÿ÷Ø\177ÿøxÀ")
     at readline.c:349
-#7  0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1,
+#7  0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
     annotation_suffix=0x4d6b44 "prompt") at top.c:2091
 #8  0x4d6cf0 in command_loop () at top.c:1345
 #9  0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.txt
index e2bae5a577e..3ac1e46d536 100644
--- a/Documentation/scheduler/sched-nice-design.txt
+++ b/Documentation/scheduler/sched-nice-design.txt
@@ -55,7 +55,7 @@ To sum it up: we always wanted to make nice levels more consistent, but
 within the constraints of HZ and jiffies and their nasty design level
 coupling to timeslices and granularity it was not really viable.
 
-The second (less frequent but still periodically occuring) complaint
+The second (less frequent but still periodically occurring) complaint
 about Linux's nice level support was its assymetry around the origo
 (which you can see demonstrated in the picture above), or more
 accurately: the fact that nice level behavior depended on the _absolute_
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 683ccae00ad..c014eccaf19 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -194,7 +194,7 @@ The following information is available in this file:
           - Packetized SCSI Protocol at 160MB/s and 320MB/s
           - Quick Arbitration Selection (QAS)
           - Retained Training Information (Rev B. ASIC only)
-        - Interrupt Coalessing
+        - Interrupt Coalescing
         - Initiator Mode (target mode not currently 
           supported)
         - Support for the PCI-X standard up to 133MHz
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 230e30846ef..08e2b4d04aa 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -206,7 +206,7 @@ of MOVE MEMORY instructions.
 The 896 and the 895A allows handling of the phase mismatch context from 
 SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
 until the C code has saved the context of the transfer).
-Implementing this without using LOAD/STORE instructions would be painfull 
+Implementing this without using LOAD/STORE instructions would be painful 
 and I didn't even want to try it.
 
 The 896 chip supports 64 bit PCI transactions and addressing, while the 
@@ -240,7 +240,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown SCSI devices do not properly support tagged command queuing.
+Some known SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that the hard disks I use on my machines behave well with 
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 49ea5c58c6b..eb9a7b905b6 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -206,7 +206,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown old SCSI devices do not properly support tagged command queuing.
+Some known old SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that I never have had problem with tagged queuing using 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 012858d2b11..4252697a95d 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -460,6 +460,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-ctxfi
+  ----------------
+
+    Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
+	* Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
+	* Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
+	* Creative Sound Blaster X-Fi Titanium Professional Audio
+	* Creative Sound Blaster X-Fi Titanium
+	* Creative Sound Blaster X-Fi Elite Pro
+	* Creative Sound Blaster X-Fi Platinum
+	* Creative Sound Blaster X-Fi Fatal1ty
+	* Creative Sound Blaster X-Fi XtremeGamer
+	* Creative Sound Blaster X-Fi XtremeMusic
+
+    reference_rate	- reference sample rate, 44100 or 48000 (default)
+    multiple		- multiple to ref. sample rate, 1 or 2 (default)
+
+    This module supports multiple cards.
+
   Module snd-darla20
   ------------------
 
@@ -754,7 +773,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     single_cmd  - Use single immediate commands to communicate with
 		codecs (for debugging only)
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
-    power_save	- Automatic power-saving timtout (in second, 0 =
+    power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
     power_save_controller - Reset HD-audio controller in power-saving mode
 		(default = on)
@@ -925,6 +944,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* Onkyo SE-90PCI
 			* Onkyo SE-200PCI
 			* ESI Juli@
+			* ESI Maya44
 			* Hercules Fortissimo IV
 			* EGO-SYS WaveTerminal 192M
 
@@ -933,7 +953,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 		  prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
 		  juli, aureon51, aureon71, universe, ap192, k8x800,
 		  phase22, phase28, ms300, av710, se200pci, se90pci,
-		  fortissimo4, sn25p, WT192M
+		  fortissimo4, sn25p, WT192M, maya44
 
     This module supports multiple cards and autoprobe.
 
@@ -1093,6 +1113,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     This module supports multiple cards.
     The driver requires the firmware loader support on kernel.
 
+  Module snd-lx6464es
+  -------------------
+
+    Module for Digigram LX6464ES boards
+
+    This module supports multiple cards.
+
   Module snd-maestro3
   -------------------
 
@@ -1543,13 +1570,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-sc6000
   -----------------
 
-    Module for Gallant SC-6000 soundcard.
+    Module for Gallant SC-6000 soundcard and later models: SC-6600
+    and SC-7000.
 
     port	- Port # (0x220 or 0x240)
     mss_port	- MSS Port # (0x530 or 0xe80)
     irq		- IRQ # (5,7,9,10,11)
     mpu_irq	- MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
     dma		- DMA # (1,3,0)
+    joystick	- Enable gameport - 0 = disable (default), 1 = enable
 
     This module supports multiple cards.
 
@@ -1859,7 +1888,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+    (Deluxe) and Essence STX.
 
     This module supports autoprobe and multiple cards.
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 322869fc8a9..de8e10a9410 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -36,6 +36,7 @@ ALC260
   acer		Acer TravelMate
   will		Will laptops (PB V7900)
   replacer	Replacer 672V
+  favorit100	Maxdata Favorit 100XS
   basic		fixed pin assignment (old default model)
   test		for testing/debugging purpose, almost all controls can
 		adjusted.  Appearing only when compiled with
@@ -85,10 +86,11 @@ ALC269
   eeepc-p703	ASUS Eeepc P703 P900A
   eeepc-p901	ASUS Eeepc P901 S101
   fujitsu	FSC Amilo
+  lifebook	Fujitsu Lifebook S6420
   auto		auto-config reading BIOS (default)
 
-ALC662/663
-==========
+ALC662/663/272
+==============
   3stack-dig	3-stack (2-channel) with SPDIF
   3stack-6ch	 3-stack (6-channel)
   3stack-6ch-dig 3-stack (6-channel) with SPDIF
@@ -107,6 +109,9 @@ ALC662/663
   asus-mode4	ASUS
   asus-mode5	ASUS
   asus-mode6	ASUS
+  dell		Dell with ALC272
+  dell-zm1	Dell ZM1 with ALC272
+  samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
 ALC882/885
@@ -118,6 +123,7 @@ ALC882/885
   asus-a7j	ASUS A7J
   asus-a7m	ASUS A7M
   macpro	MacPro support
+  mb5		Macbook 5,1
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
@@ -133,10 +139,12 @@ ALC883/888
   acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
+  acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
   targa-dig	Targa/MSI
-  targa-2ch-dig	Targs/MSI with 2-channel
+  targa-2ch-dig	Targa/MSI with 2-channel
+  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
   laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
   lenovo-101e	Lenovo 101E
   lenovo-nb0763	Lenovo NB0763
@@ -150,6 +158,9 @@ ALC883/888
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  asus-p5q	ASUS P5Q-EM boards
+  mb31		MacBook 3,1
+  sony-vaio-tt  Sony VAIO TT
   auto		auto-config reading BIOS (default)
 
 ALC861/660
@@ -348,6 +359,7 @@ STAC92HD71B*
   hp-m4		HP mini 1000
   hp-dv5	HP dv series
   hp-hdx	HP HDX series
+  hp-dv4-1222nr	HP dv4-1222nr (with LED support)
   auto		BIOS setup (default)
 
 STAC92HD73*
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 88b7433d2f1..71ac995b191 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -16,7 +16,7 @@ methods for the	HD-audio hardware.
 The HD-audio component consists of two parts: the controller chip and 
 the codec chips on the HD-audio bus.  Linux provides a single driver
 for all controllers, snd-hda-intel.  Although the driver name contains
-a word of a well-known harware vendor, it's not specific to it but for
+a word of a well-known hardware vendor, it's not specific to it but for
 all controller chips by other companies.  Since the HD-audio
 controllers are supposed to be compatible, the single snd-hda-driver
 should work in most cases.  But, not surprisingly, there are known
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index cfac20cf9e3..381908d8ca4 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -88,26 +88,34 @@ card*/pcm*/info
 	substreams, etc.
 
 card*/pcm*/xrun_debug
-	This file appears when CONFIG_SND_DEBUG=y.
-	This shows the status of xrun (= buffer overrun/xrun) debug of
-	ALSA PCM middle layer, as an integer from 0 to 2.  The value
-	can be changed by writing to this file, such as
-
-		 # cat 2 > /proc/asound/card0/pcm0p/xrun_debug
-
-	When this value is greater than 0, the driver will show the
-	messages to kernel log when an xrun is detected.  The debug
-	message is shown also when the invalid H/W pointer is detected
-	at the update of periods (usually called from the interrupt
+	This file appears when CONFIG_SND_DEBUG=y and
+	CONFIG_PCM_XRUN_DEBUG=y.
+	This shows the status of xrun (= buffer overrun/xrun) and
+	invalid PCM position debug/check of ALSA PCM middle layer.
+	It takes an integer value, can be changed by writing to this
+	file, such as
+
+		 # cat 5 > /proc/asound/card0/pcm0p/xrun_debug
+
+	The value consists of the following bit flags:
+	  bit 0 = Enable XRUN/jiffies debug messages
+	  bit 1 = Show stack trace at XRUN / jiffies check
+	  bit 2 = Enable additional jiffies check
+
+	When the bit 0 is set, the driver will show the messages to
+	kernel log when an xrun is detected.  The debug message is
+	shown also when the invalid H/W pointer is detected at the
+	update of periods (usually called from the interrupt
 	handler).
 
-	When this value is greater than 1, the driver will show the
-	stack trace additionally.  This may help the debugging.
+	When the bit 1 is set, the driver will show the stack trace
+	additionally.  This may help the debugging.
 
-	Since 2.6.30, this option also enables the hwptr check using
+	Since 2.6.30, this option can enable the hwptr check using
 	jiffies.  This detects spontaneous invalid pointer callback
 	values, but can be lead to too much corrections for a (mostly
 	buggy) hardware that doesn't give smooth pointer updates.
+	This feature is enabled via the bit 2.
 
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44
new file mode 100644
index 00000000000..0e41576fa13
--- /dev/null
+++ b/Documentation/sound/alsa/README.maya44
@@ -0,0 +1,163 @@
+NOTE: The following is the original document of Rainer's patch that the
+current maya44 code based on.  Some contents might be obsoleted, but I
+keep here as reference -- tiwai
+
+----------------------------------------------------------------
+ 
+STATE OF DEVELOPMENT:
+
+This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann.
+Development is carried out by Rainer Zimmermann (mail@lightshed.de).
+
+ESI provided a sample Maya44 card for the development work.
+
+However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing.
+
+This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008).
+
+
+The following functions work, as tested by Rainer Zimmermann and Piotr Makowski:
+
+- playback and capture at all sampling rates
+- input/output level
+- crossmixing
+- line/mic switch
+- phantom power switch
+- analogue monitor a.k.a bypass
+
+
+The following functions *should* work, but are not fully tested:
+
+- Channel 3+4 analogue - S/PDIF input switching
+- S/PDIF output
+- all inputs/outputs on the M/IO/DIO extension card
+- internal/external clock selection
+
+
+*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.*
+
+
+Things that do not seem to work:
+
+- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code).
+
+- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down.
+
+
+DRIVER DETAILS:
+
+the following files were added:
+
+pci/ice1724/maya44.c        - Maya44 specific code
+pci/ice1724/maya44.h
+pci/ice1724/ice1724.patch
+pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES)
+i2c/other/wm8776.c  - low-level access routines for Wolfson WM8776 codecs 
+include/wm8776.h
+
+
+Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure.
+This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately.
+
+
+the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree:
+
+wtm.h
+vt1720_mobo.h
+revo.h
+prodigy192.h
+pontis.h
+phase.h
+maya44.h
+juli.h
+aureon.h
+amp.h
+envy24ht.h
+se.h
+prodigy_hifi.h
+
+
+*I hope this is the correct way to do things.*
+
+
+SAMPLING RATES:
+
+The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture.
+
+As the ICE1724 chip only allows one global sampling rate, this is handled as follows:
+
+* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels.
+
+* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices.
+
+*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality.
+
+
+I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic.
+
+The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712).
+
+
+SOUND DEVICES:
+
+PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0):
+
+hw:0,0 input - stereo, analog input 1+2
+hw:0,0 output - stereo, analog output 1+2
+hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input
+hw:0,1 output - stereo, analog output 3+4 (and SPDIF out)
+
+
+NAMING OF MIXER CONTROLS:
+
+(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software).
+
+
+PCM: (digital) output level for channel 1+2
+PCM 1: same for channel 3+4
+
+Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on input 1/2.
+    Make sure this is not turned on while any other source is connected to input 1/2.
+    It might damage the source and/or the maya44 card.
+
+Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
+
+Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver.
+Bypass 1: same for channel 3+4.
+
+Crossmix: cross-mixer from channels 1+2 to channels 3+4
+Crossmix 1: cross-mixer from channels 3+4 to channels 1+2
+
+IEC958 Output: switch for S/PDIF output.
+    This is not supported by the ESI windows driver.
+    S/PDIF should output the same signal as channel 3+4. [untested!]
+
+
+Digitial output selectors:
+
+    These switches allow a direct digital routing from the ADCs to the DACs.
+    Each switch determines where the digital input data to one of the DACs comes from.
+    They are not supported by the ESI windows driver.
+    For normal operation, they should all be set to "PCM out".
+
+H/W: Output source channel 1
+H/W 1: Output source channel 2
+H/W 2: Output source channel 3
+H/W 3: Output source channel 4
+
+H/W 4 ... H/W 9: unknown function, left in to enable testing.
+    Possibly some of these control S/PDIF output(s).
+    If these turn out to be unused, they will go away in later driver versions.
+
+Selectable values for each of the digital output selectors are:
+   "PCM out" -> DAC output of the corresponding channel (default setting)
+   "Input 1"...
+   "Input 4" -> direct routing from ADC output of the selected input channel
+
+
+--------
+
+Feb 14, 2008
+Rainer Zimmermann
+mail@lightshed.de
+
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 34e87ec1379..de8efbc7e4b 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -114,7 +114,7 @@ For writing a sequence of verbs, use snd_hda_sequence_write().
 
 There are variants of cached read/write, snd_hda_codec_write_cache(),
 snd_hda_sequence_write_cache().  These are used for recording the
-register states for the power-mangement resume.  When no PM is needed,
+register states for the power-management resume.  When no PM is needed,
 these are equivalent with non-cached version.
 
 To retrieve the number of sub nodes connected to the given node, use
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 9e6763264a2..9ac842be9b4 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -62,6 +62,7 @@ Audio DAPM widgets fall into a number of types:-
  o Mic        - Mic (and optional Jack)
  o Line       - Line Input/Output (and optional Jack)
  o Speaker    - Speaker
+ o Supply     - Power or clock supply widget used by other widgets.
  o Pre        - Special PRE widget (exec before all others)
  o Post       - Special POST widget (exec after all others)
 
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index c302ddf629a..6fab2dcbb4d 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -358,7 +358,7 @@ nr_pdflush_threads
 The current number of pdflush threads.  This value is read-only.
 The value changes according to the number of dirty pages in the system.
 
-When neccessary, additional pdflush threads are created, one per second, up to
+When necessary, additional pdflush threads are created, one per second, up to
 nr_pdflush_threads_max.
 
 ==============================================================
@@ -565,7 +565,7 @@ swappiness
 
 This control is used to define how aggressive the kernel will swap
 memory pages.  Higher values will increase agressiveness, lower values
-descrease the amount of swap.
+decrease the amount of swap.
 
 The default value is 60.
 
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index e7c09abcfab..04763a32552 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -7,7 +7,7 @@ by Intel and Microsoft which can be found at
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,
-each of which can generate oneshot interupts and at least one of which has
+each of which can generate oneshot interrupts and at least one of which has
 additional hardware to support periodic interrupts.  The comparators are
 also called "timers", which can be misleading since usually timers are
 independent of each other ... these share a counter, complicating resets.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 20d368c5981..9bd00fc2e82 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -62,7 +62,7 @@ Timerstats sample period: 3.888770 s
 
 The first column is the number of events, the second column the pid, the third
 column is the name of the process. The forth column shows the function which
-initialized the timer and in parantheses the callback function which was
+initialized the timer and in parenthesis the callback function which was
 executed on expiry.
 
     Thomas, Ingo
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 2a82d860294..7bd27f0e288 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1834,4 +1834,4 @@ an error.
 -----------
 
 More details can be found in the source code, in the
-kernel/tracing/*.c files.
+kernel/trace/*.c files.
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
index a956d9b7f94..6308735e58c 100644
--- a/Documentation/trace/kmemtrace.txt
+++ b/Documentation/trace/kmemtrace.txt
@@ -64,7 +64,7 @@ III. Quick usage guide
 CONFIG_KMEMTRACE).
 
 2) Get the userspace tool and build it:
-$ git-clone git://repo.or.cz/kmemtrace-user.git		# current repository
+$ git clone git://repo.or.cz/kmemtrace-user.git		# current repository
 $ cd kmemtrace-user/
 $ ./autogen.sh
 $ ./configure
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c3d62c7843..c480e9c32db 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -84,7 +84,7 @@ The different logical parts of this driver are:
 
       *UWB*: the Ultra-Wide-Band stack -- manages the radio and
       associated spectrum to allow for devices sharing it. Allows to
-      control bandwidth assingment, beaconing, scanning, etc
+      control bandwidth assignment, beaconing, scanning, etc
 
     *
 
@@ -184,7 +184,7 @@ and sends the replies and notifications back to the API
 [/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
 is chartered, among other things, to keep the tab of how the UWB radio
 neighborhood looks, creating and destroying devices as they show up or
-dissapear.
+disappear.
 
 Command execution is very simple: a command block is sent and a event
 block or reply is expected back. For sending/receiving command/events, a
@@ -333,7 +333,7 @@ read descriptors and move our data.
 
 *Device life cycle and keep alives*
 
-Everytime there is a succesful transfer to/from a device, we update a
+Every time there is a successful transfer to/from a device, we update a
 per-device activity timestamp. If not, every now and then we check and
 if the activity timestamp gets old, we ping the device by sending it a
 Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
@@ -411,7 +411,7 @@ context (wa_xfer) and submit it. When the xfer is done, our callback is
 called and we assign the status bits and release the xfer resources.
 
 In dequeue() we are basically cancelling/aborting the transfer. We issue
-a xfer abort request to the HC, cancell all the URBs we had submitted
+a xfer abort request to the HC, cancel all the URBs we had submitted
 and not yet done and when all that is done, the xfer callback will be
 called--this will call the URB callback.
 
diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt
index 6f24f566955..fe6a99a32bb 100644
--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@@ -27,7 +27,7 @@ Association and disassociation of URBs with anchors
 
 An association of URBs to an anchor is made by an explicit
 call to usb_anchor_urb(). The association is maintained until
-an URB is finished by (successfull) completion. Thus disassociation
+an URB is finished by (successful) completion. Thus disassociation
 is automatic. A function is provided to forcibly finish (kill)
 all URBs associated with an anchor.
 Furthermore, disassociation can be made with usb_unanchor_urb()
@@ -76,4 +76,4 @@ usb_get_from_anchor()
 Returns the oldest anchored URB of an anchor. The URB is unanchored
 and returned with a reference. As you may mix URBs to several
 destinations in one anchor you have no guarantee the chronologically
-first submitted URB is returned.
\ No newline at end of file
+first submitted URB is returned.
diff --git a/Documentation/usb/callbacks.txt b/Documentation/usb/callbacks.txt
index 7c812411945..bfb36b34b79 100644
--- a/Documentation/usb/callbacks.txt
+++ b/Documentation/usb/callbacks.txt
@@ -65,7 +65,7 @@ Accept or decline an interface. If you accept the device return 0,
 otherwise -ENODEV or -ENXIO. Other error codes should be used only if a
 genuine error occurred during initialisation which prevented a driver
 from accepting a device that would else have been accepted.
-You are strongly encouraged to use usbcore'sfacility,
+You are strongly encouraged to use usbcore's facility,
 usb_set_intfdata(), to associate a data structure with an interface, so
 that you know which internal state and identity you associate with a
 particular interface. The device will not be suspended and you may do IO
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 914cb7e734a..4652c0f5da3 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -11,7 +11,7 @@ encoder chip:
 2) Some people have problems getting the i2c bus to work.
    The symptom is that the eeprom cannot be read and the card is
    unusable. This is probably fixed, but if you have problems
-   then post to the video4linux or ivtv-users mailinglist.
+   then post to the video4linux or ivtv-users mailing list.
 
 3) VBI (raw or sliced) has not yet been implemented.
 
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index 2db5893d6c9..29a6ff8bc7d 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -5,21 +5,51 @@ only the AMD64 specific ones are listed here.
 
 Machine check
 
-   mce=off disable machine check
-   mce=bootlog Enable logging of machine checks left over from booting.
-               Disabled by default on AMD because some BIOS leave bogus ones.
-               If your BIOS doesn't do that it's a good idea to enable though
-               to make sure you log even machine check events that result
-               in a reboot. On Intel systems it is enabled by default.
+   Please see Documentation/x86/x86_64/machinecheck for sysfs runtime tunables.
+
+   mce=off
+		Disable machine check
+   mce=no_cmci
+		Disable CMCI(Corrected Machine Check Interrupt) that
+		Intel processor supports.  Usually this disablement is
+		not recommended, but it might be handy if your hardware
+		is misbehaving.
+		Note that you'll get more problems without CMCI than with
+		due to the shared banks, i.e. you might get duplicated
+		error logs.
+   mce=dont_log_ce
+		Don't make logs for corrected errors.  All events reported
+		as corrected are silently cleared by OS.
+		This option will be useful if you have no interest in any
+		of corrected errors.
+   mce=ignore_ce
+		Disable features for corrected errors, e.g. polling timer
+		and CMCI.  All events reported as corrected are not cleared
+		by OS and remained in its error banks.
+		Usually this disablement is not recommended, however if
+		there is an agent checking/clearing corrected errors
+		(e.g. BIOS or hardware monitoring applications), conflicting
+		with OS's error handling, and you cannot deactivate the agent,
+		then this option will be a help.
+   mce=bootlog
+		Enable logging of machine checks left over from booting.
+		Disabled by default on AMD because some BIOS leave bogus ones.
+		If your BIOS doesn't do that it's a good idea to enable though
+		to make sure you log even machine check events that result
+		in a reboot. On Intel systems it is enabled by default.
    mce=nobootlog
 		Disable boot machine check logging.
-   mce=tolerancelevel (number)
+   mce=tolerancelevel[,monarchtimeout] (number,number)
+		tolerance levels:
 		0: always panic on uncorrected errors, log corrected errors
 		1: panic or SIGBUS on uncorrected errors, log corrected errors
 		2: SIGBUS or log uncorrected errors, log corrected errors
 		3: never panic or SIGBUS, log all errors (for testing only)
 		Default is 1
 		Can be also set using sysfs which is preferable.
+		monarchtimeout:
+		Sets the time in us to wait for other CPUs on machine checks. 0
+		to disable.
 
    nomce (for compatibility with i386): same as mce=off
 
diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck
index a05e58e7b15..b1fb3027328 100644
--- a/Documentation/x86/x86_64/machinecheck
+++ b/Documentation/x86/x86_64/machinecheck
@@ -41,7 +41,9 @@ check_interval
 	the polling interval.  When the poller stops finding MCEs, it
 	triggers an exponential backoff (poll less often) on the polling
 	interval. The check_interval variable is both the initial and
-	maximum polling interval.
+	maximum polling interval. 0 means no polling for corrected machine
+	check errors (but some corrected errors might be still reported
+	in other ways)
 
 tolerant
 	Tolerance level. When a machine check exception occurs for a non
@@ -67,6 +69,10 @@ trigger
 	Program to run when a machine check event is detected.
 	This is an alternative to running mcelog regularly from cron
 	and allows to detect events faster.
+monarch_timeout
+	How long to wait for the other CPUs to machine check too on a
+	exception. 0 to disable waiting for other CPUs.
+	Unit: us
 
 TBD document entries for AMD threshold interrupt configuration
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 1a0084e22cf..09f6b3e5708 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -157,9 +157,10 @@ S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
+P:	Alan Cox
+M:	alan@lxorguk.ukuu.org.uk
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-M:	alan@lxorguk.ukuu.org.uk
 S:	Odd Fixes
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
@@ -681,6 +682,13 @@ M:	sakoman@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+F:	arch/arm/mach-pxa/hx4700.c
+F:	arch/arm/mach-pxa/include/mach/hx4700.h
+
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 P:	Kristoffer Ericson
 M:	kristoffer.ericson@gmail.com
@@ -940,6 +948,12 @@ P:	Luis R. Rodriguez
 M:	lrodriguez@atheros.com
 P:	Jouni Malinen
 M:	jmalinen@atheros.com
+P:	Sujith Manoharan
+M:	Sujith.Manoharan@atheros.com
+P:	Vasanthakumar Thiagarajan
+M:	vasanth@atheros.com
+P:	Senthil Balasubramanian
+M:	senthilkumar@atheros.com
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
@@ -1332,6 +1346,13 @@ F:	drivers/net/can/
 F:	include/linux/can/
 F:	include/linux/can.h
 
+CAN NETWORK DRIVERS
+P:	Wolfgang Grandegger
+M:	wg@grandegger.com
+L:	socketcan-core@lists.berlios.de (subscribers-only)
+W:	http://developer.berlios.de/projects/socketcan/
+S:	Maintained
+
 CELL BROADBAND ENGINE ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
@@ -1802,10 +1823,10 @@ F:	drivers/char/epca*
 F:	drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:	Stephen Rothwell
-M:	sfr@canb.auug.org.au
+P:	Eric Paris
+M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
 F:	include/linux/dnotify.h
@@ -2105,6 +2126,15 @@ W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
+ENE CB710 FLASH CARD READER DRIVER
+P:	Michał Mirosław
+M:	mirq-linux@rere.qmqm.pl
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/misc/cb710/
+F:	drivers/mmc/host/cb710-mmc.*
+F:	include/linux/cb710.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 P:	Christopher Hoover
 M:	ch@murgatroid.com
@@ -2351,7 +2381,7 @@ F:	fs/freevxfs/
 
 FREEZER
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -2827,6 +2857,18 @@ L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
+IEEE 802.15.4 SUBSYSTEM
+P:	Dmitry Eremin-Solenikov
+M:	dbaryshkov@gmail.com
+P:	Sergey Lapin
+M:	slapin@ossfans.org
+L:	linux-zigbee-devel@lists.sourceforge.net
+W:	http://apps.sourceforge.net/trac/linux-zigbee
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
+S:	Maintained
+F:	net/ieee802154/
+F:	drivers/ieee801254/
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 P:	Mimi Zohar
 M:	zohar@us.ibm.com
@@ -2858,6 +2900,8 @@ P:	John McCutchan
 M:	john@johnmccutchan.com
 P:	Robert Love
 M:	rlove@rlove.org
+P:	Eric Paris
+M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
@@ -3118,6 +3162,7 @@ M:	samuel@sortiz.org
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/irda-2.6.git
 F:	Documentation/networking/irda.txt
 F:	drivers/net/irda/
 F:	include/net/irda/
@@ -3361,6 +3406,16 @@ F:	drivers/serial/kgdboc.c
 F:	include/linux/kgdb.h
 F:	kernel/kgdb.c
 
+KMEMLEAK
+P:	Catalin Marinas
+M:	catalin.marinas@arm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/kmemleak.txt
+F:	include/linux/kmemleak.h
+F:	mm/kmemleak.c
+F:	mm/kmemleak-test.c
+
 KMEMTRACE
 P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
@@ -3370,12 +3425,6 @@ F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
-KMEMLEAK
-P:	Catalin Marinas
-M:	catalin.marinas@arm.com
-L:	linux-kernel@vger.kernel.org
-S:	Maintained
-
 KPROBES
 P:	Ananth N Mavinakayanahalli
 M:	ananth@in.ibm.com
@@ -4153,6 +4202,69 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+OMAP SUPPORT
+P:	Tony Lindgren <tony@atomide.com>
+M:	tony@atomide.com
+L:	linux-omap@vger.kernel.org
+W:	http://www.muru.com/linux/omap/
+W:	http://linux.omap.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S:	Maintained
+F:	arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P:	Paul Walmsley
+M:	paul@pwsan.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P:	Kevin Hilman
+M:	khilman@deeprootsystems.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P:	Jarkko Nikula
+M:	jhnikula@gmail.com
+L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P:	Imre Deak
+M:	imre.deak@nokia.com
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap/
+
+OMAP MMC SUPPORT
+P:	Jarkko Lavinen
+M:	jarkko.lavinen@nokia.com
+L:	linux-kernel@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P:	Deepak Saxena
+M:	dsaxena@plexity.net
+S:	Maintained
+F:	drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+
 OMFS FILESYSTEM
 P:	Bob Copeland
 M:	me@bobcopeland.com
@@ -4536,8 +4648,8 @@ S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:	Masakazu Mokuno
-M:	mokuno@sm.sony.co.jp
+P:	Geoff Levand
+M:	geoffrey.levand@am.sony.com
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
@@ -4591,7 +4703,7 @@ F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Russell King
 M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
@@ -4601,23 +4713,24 @@ F:	drivers/pcmcia/pxa2xx*
 F:	drivers/spi/pxa2xx*
 F:	drivers/usb/gadget/pxa2*
 F:	include/sound/pxa2xx-lib.h
-F:	sound/soc/pxa/pxa2xx*
+F:	sound/arm/pxa*
+F:	sound/soc/pxa
 
 PXA168 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Jason Chagas
 M:	jason.chagas@marvell.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA910 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA MMCI DRIVER
 S:	Orphan
@@ -4737,7 +4850,7 @@ F:	drivers/net/r6040.c
 RDS - RELIABLE DATAGRAM SOCKETS
 P:	Andy Grover
 M:	andy.grover@oracle.com
-L:	rds-devel@oss.oracle.com
+L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
 
@@ -4777,9 +4890,9 @@ S:	Supported
 F:	fs/reiserfs/
 
 RFKILL
-P:	Ivo van Doorn
-M:	IvDoorn@gmail.com
-L:	netdev@vger.kernel.org
+P:	Johannes Berg
+M:	johannes@sipsolutions.net
+L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F	Documentation/rfkill.txt
 F:	net/rfkill/
@@ -5138,7 +5251,6 @@ P:	Vincent Sanders
 M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
-F:	arch/arm/mach-ebsa110/
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
@@ -5329,11 +5441,12 @@ P:	Liam Girdwood
 M:	lrg@slimlogic.co.uk
 P:	Mark Brown
 M:	broonie@opensource.wolfsonmicro.com
-T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (subscribers-only)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
 F:	sound/soc/
+F:	include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
 P:	David S. Miller
@@ -5551,20 +5664,6 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
-TI OMAP MMC INTERFACE DRIVER
-P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap@vger.kernel.org
-W:	http://linux.omap.com
-W:	http://www.muru.com/linux/omap/
-S:	Maintained
-F:	drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
-S:	Maintained
-F:	drivers/char/hw_random/omap-rng.c
-
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
diff --git a/Makefile b/Makefile
index 03373bb703c..ea63667617f 100644
--- a/Makefile
+++ b/Makefile
@@ -35,10 +35,8 @@ MAKEFLAGS += -rR --no-print-directory
 # To put more focus on warnings, be less verbose as default
 # Use 'make V=1' to see the full commands
 
-ifdef V
-  ifeq ("$(origin V)", "command line")
-    KBUILD_VERBOSE = $(V)
-  endif
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
 endif
 ifndef KBUILD_VERBOSE
   KBUILD_VERBOSE = 0
@@ -54,10 +52,8 @@ endif
 # See the file "Documentation/sparse.txt" for more details, including
 # where to get the "sparse" utility.
 
-ifdef C
-  ifeq ("$(origin C)", "command line")
-    KBUILD_CHECKSRC = $(C)
-  endif
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
 endif
 ifndef KBUILD_CHECKSRC
   KBUILD_CHECKSRC = 0
@@ -69,12 +65,10 @@ endif
 ifdef SUBDIRS
   KBUILD_EXTMOD ?= $(SUBDIRS)
 endif
-ifdef M
-  ifeq ("$(origin M)", "command line")
-    KBUILD_EXTMOD := $(M)
-  endif
-endif
 
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
 
 # kbuild supports saving output files in a separate directory.
 # To locate output files in a separate directory two syntaxes are supported.
@@ -98,10 +92,8 @@ ifeq ($(KBUILD_SRC),)
 
 # OK, Make called in directory where kernel src resides
 # Do we want to locate output files in a separate directory?
-ifdef O
-  ifeq ("$(origin O)", "command line")
-    KBUILD_OUTPUT := $(O)
-  endif
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
 endif
 
 # That's our default target when none is given on the command line
diff --git a/README b/README
index d6c6c742c1d..737838fe73c 100644
--- a/README
+++ b/README
@@ -174,8 +174,17 @@ CONFIGURING the kernel:
 	"make silentoldconfig"
 			   Like above, but avoids cluttering the screen
 			   with questions already answered.
+			   Additionally updates the dependencies.
 	"make defconfig"   Create a ./.config file by using the default
-			   symbol values from arch/$ARCH/defconfig.
+			   symbol values from either arch/$ARCH/defconfig
+			   or arch/$ARCH/configs/${PLATFORM}_defconfig,
+			   depending on the architecture.
+	"make ${PLATFORM}_defconfig"
+			  Create a ./.config file by using the default
+			  symbol values from
+			  arch/$ARCH/configs/${PLATFORM}_defconfig.
+			  Use "make help" to get a list of all available
+			  platforms of your architecture.
 	"make allyesconfig"
 			   Create a ./.config file by setting symbol
 			   values to 'y' as much as possible.
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 62b363584b2..610dff44d94 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -256,5 +256,5 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 #define smp_mb__before_atomic_inc()	smp_mb()
 #define smp_mb__after_atomic_inc()	smp_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ALPHA_ATOMIC_H */
diff --git a/arch/alpha/include/asm/bitsperlong.h b/arch/alpha/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..ad57f786820
--- /dev/null
+++ b/arch/alpha/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_ALPHA_BITSPERLONG_H
+#define __ASM_ALPHA_BITSPERLONG_H
+
+#define __BITS_PER_LONG 64
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_ALPHA_BITSPERLONG_H */
diff --git a/arch/alpha/include/asm/errno.h b/arch/alpha/include/asm/errno.h
index 69e2655249d..98099bda937 100644
--- a/arch/alpha/include/asm/errno.h
+++ b/arch/alpha/include/asm/errno.h
@@ -120,4 +120,6 @@
 #define	EOWNERDEAD	136	/* Owner died */
 #define	ENOTRECOVERABLE	137	/* State not recoverable */
 
+#define	ERFKILL		138	/* Operation not possible due to RF-kill */
+
 #endif
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index 0995f9d1341..07af062544f 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -93,6 +93,6 @@ typedef struct page *pgtable_t;
 					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ALPHA_PAGE_H */
diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h
index 13c2305d35e..a9388300abb 100644
--- a/arch/alpha/include/asm/signal.h
+++ b/arch/alpha/include/asm/signal.h
@@ -111,7 +111,7 @@ typedef unsigned long sigset_t;
 #define SIG_UNBLOCK        2	/* for unblocking signals */
 #define SIG_SETMASK        3	/* for setting the signal mask */
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct osf_sigaction {
diff --git a/arch/alpha/include/asm/suspend.h b/arch/alpha/include/asm/suspend.h
deleted file mode 100644
index c7042d57585..00000000000
--- a/arch/alpha/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_SUSPEND_H
-#define __ALPHA_SUSPEND_H
-
-/* Dummy include. */
-
-#endif  /* __ALPHA_SUSPEND_H */
diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h
index f072f344497..bd621ecd1eb 100644
--- a/arch/alpha/include/asm/types.h
+++ b/arch/alpha/include/asm/types.h
@@ -25,9 +25,6 @@ typedef unsigned int umode_t;
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
-#define BITS_PER_LONG 64
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma_addr_t;
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 42ee05981e7..9a3334ae282 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -371,8 +371,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 	int retval = -EINVAL;
 	char *name;
 
-	lock_kernel();
-
 	name = getname(path);
 	retval = PTR_ERR(name);
 	if (IS_ERR(name))
@@ -392,7 +390,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 	}
 	putname(name);
  out:
-	unlock_kernel();
 	return retval;
 }
 
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
index 62dc379d301..813c9b63c0e 100644
--- a/arch/alpha/mm/extable.c
+++ b/arch/alpha/mm/extable.c
@@ -48,6 +48,27 @@ void sort_extable(struct exception_table_entry *start,
 	     cmp_ex, swap_ex);
 }
 
+#ifdef CONFIG_MODULES
+/*
+ * Any entry referring to the module init will be at the beginning or
+ * the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
+				  m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+
 const struct exception_table_entry *
 search_extable(const struct exception_table_entry *first,
 	       const struct exception_table_entry *last,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d02cdb15b2..29475101a7b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION
 
 config GENERIC_GPIO
 	bool
-	default n
 
 config GENERIC_TIME
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
@@ -55,7 +52,6 @@ config MMU
 
 config NO_IOPORT
 	bool
-	default n
 
 config EISA
 	bool
@@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config ARCH_HAS_ILOG2_U32
 	bool
-	default n
 
 config ARCH_HAS_ILOG2_U64
 	bool
-	default n
 
 config GENERIC_HWEIGHT
 	bool
@@ -253,6 +247,14 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select CPU_SA110
@@ -277,14 +279,6 @@ config ARCH_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select CPU_FA526
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+config ARCH_STMP3XXX
+	bool "Freescale STMP3xxx"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select USB_ARCH_HAS_EHCI
+	help
+	  Support for systems based on the Freescale 3xxx CPUs.
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -309,15 +327,6 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-	bool "IMX"
-	select CPU_ARM920T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -398,6 +407,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -405,28 +415,6 @@ config ARCH_KIRKWOOD
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
@@ -441,6 +429,7 @@ config ARCH_MV78XX0
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -448,23 +437,13 @@ config ARCH_MV78XX0
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -473,6 +452,52 @@ config ARCH_ORION5X
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 	  Orion-2 (5281), Orion-1-90 (6183).
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+	bool "Micrel/Kendin KS8695"
+	select CPU_ARM922T
+	select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+	  System-on-Chip devices.
+
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	select CPU_ARM926T
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+	bool "Nuvoton W90X900 CPU"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	select COMMON_CLKDEV
+	help
+		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+		can login www.mcuos.com or www.nuvoton.com to know more.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -495,19 +520,16 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MMP
-	bool "Marvell PXA168/910"
-	depends on MMU
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
+config ARCH_MSM
+	bool "Qualcomm MSM"
+	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
+	  interface to the ARM9 modem processor which runs the baseband stack
+	  and controls some vital subsystems (clock and power control, etc).
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -576,6 +598,20 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_U300
+	bool "ST-Ericsson U300 Series"
+	depends on MMU
+	select CPU_ARM926T
+	select ARM_AMBA
+	select ARM_VIC
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_GPIO
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -587,6 +623,7 @@ config ARCH_DAVINCI
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
+	select GENERIC_ALLOCATOR
 	help
 	  Support for TI's DaVinci platform.
 
@@ -600,24 +637,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM
-	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
@@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-u300/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -859,8 +880,11 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -878,6 +902,18 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config HAVE_ARM_SCU
+	bool
+	depends on SMP
+	help
+	  This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+	bool
+	depends on SMP
+	help
+	  This options enables support for the ARM timer and watchdog unit
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
@@ -916,8 +952,10 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 	default y
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -979,7 +1017,6 @@ config OABI_COMPAT
 
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
@@ -1022,12 +1059,12 @@ source "mm/Kconfig"
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
 		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182
+		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP
 	  correct operation of some network protocols. With an IP-only
 	  configuration it is safe to say N, otherwise say Y.
 
+config UACCESS_WITH_MEMCPY
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	default y if CPU_FEROCEON
+	help
+	  Implement faster copy_to_user and clear_user methods for CPU
+	  cores where a 8-word STM instruction give significantly higher
+	  memory write throughput than a sequence of individual 32bit stores.
+
+	  A possible side effect is a slight increase in scheduling latency
+	  between threads sharing the same address space if they invoke
+	  such copy operations with large buffers.
+
+	  However, if the CPU data cache is using a write-allocate mode,
+	  this option is unlikely to provide any performance gain.
+
 endmenu
 
 menu "Boot options"
@@ -1188,7 +1241,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_IMX && CPU_FREQ
-	default n
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
-	  If in doubt, say N.
+config CPU_FREQ_PXA
+	bool
+	depends on CPU_FREQ && ARCH_PXA && PXA25x
+	default y
+	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729bf13d..c877d6df23d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -11,6 +11,9 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux	+= --be8
+endif
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
@@ -99,64 +102,73 @@ CHECKFLAGS	+= -D__arm__
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
-
- machine-$(CONFIG_ARCH_RPC)	   := rpc
- machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
- machine-$(CONFIG_ARCH_SHARK)	   := shark
- machine-$(CONFIG_ARCH_SA1100)	   := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111)	   := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
 endif
- machine-$(CONFIG_ARCH_PXA)	   := pxa
- machine-$(CONFIG_ARCH_MMP)	   := mmp
-    plat-$(CONFIG_PLAT_PXA)	   := pxa
- machine-$(CONFIG_ARCH_L7200)	   := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI)     := gemini
- textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
- machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
- machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
-    plat-$(CONFIG_PLAT_IOP)	   := iop
- machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1)	   := omap1
- machine-$(CONFIG_ARCH_OMAP2)	   := omap2
- machine-$(CONFIG_ARCH_OMAP3)	   := omap2
-    plat-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
-    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)	   := imx
- machine-$(CONFIG_ARCH_H720X)	   := h720x
- machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)	   := at91
- machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
- machine-$(CONFIG_ARCH_NETX)	   := netx
- machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
- machine-$(CONFIG_ARCH_KS8695)     := ks8695
-    plat-$(CONFIG_ARCH_MXC)	   := mxc
- machine-$(CONFIG_ARCH_MX2)	   := mx2
- machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_MX1)	   := mx1
- machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
-    plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM)	   := msm
- machine-$(CONFIG_ARCH_LOKI)       := loki
- machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
+machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		:= gemini
+machine-$(CONFIG_ARCH_H720X)		:= h720x
+machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
+machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
+machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		:= ks8695
+machine-$(CONFIG_ARCH_L7200)		:= l7200
+machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
+machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_MMP)		:= mmp
+machine-$(CONFIG_ARCH_MSM)		:= msm
+machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
+machine-$(CONFIG_ARCH_MX1)		:= mx1
+machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
+machine-$(CONFIG_ARCH_OMAP1)		:= omap1
+machine-$(CONFIG_ARCH_OMAP2)		:= omap2
+machine-$(CONFIG_ARCH_OMAP3)		:= omap2
+machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
+machine-$(CONFIG_ARCH_PXA)		:= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		:= realview
+machine-$(CONFIG_ARCH_RPC)		:= rpc
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100)		:= sa1100
+machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
+machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_W90X900)		:= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+
+# Platform directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)		:= mxc
+plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_ORION)	:= orion
+plat-$(CONFIG_PLAT_PXA)		:= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index fbe5eef1f6c..ce39dc54008 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
 OBJS		+= head-sharpsl.o
 endif
 
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
 ifeq ($(CONFIG_CPU_CP15),y)
 OBJS		+= big-endian.o
 else
@@ -78,6 +78,9 @@ EXTRA_AFLAGS  := -Wa,-march=all
 # linker symbols.  We only define initrd_phys and params_phys if the
 # machine class defined the corresponding makefile variable.
 LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
 ifneq ($(INITRD_PHYS),)
 LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b371fba1b95..01d49be3b2c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,9 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -455,6 +458,9 @@ __armv7_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index a2cd9beaf37..4efbb9df044 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -4,6 +4,14 @@ config ARM_GIC
 config ARM_VIC
 	bool
 
+config ARM_VIC_NR
+	int
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config ICST525
 	bool
 
@@ -27,10 +35,6 @@ config SHARP_LOCOMO
 config SHARP_PARAM
 	bool
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
 config SHARP_SCOOP
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7cb7961d81c..76be7ff2a7c 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 5589444ff43..f37afd9422f 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 }
 EXPORT_SYMBOL(clkdev_alloc);
 
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
+
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	l = clkdev_alloc(r, alias, alias_dev_name);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
+	return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
 /*
  * clkdev_drop - remove a clock dynamically allocated
  */
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
deleted file mode 100644
index 140f1d721d5..00000000000
--- a/arch/arm/common/sharpsl_pm.c
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/apm-emulation.h>
-#include <linux/suspend.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
-	int voltage, percent, apm_status, i = 0;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_delayed_work(&toggle_charger, 0);
-
-	while(1) {
-		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-			break;
-		}
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_err(sharpsl_pm.dev, "Charging Error!\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
-	}
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_OFF);
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	sharpsl_pm_led(SHARPSL_LED_ON);
-	sharpsl_pm.machinfo->charge(0);
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	sharpsl_pm.machinfo->charge(1);
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
-   delay until after that has been processed */
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
-	int is_fatal = 0;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i=0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return (ad_val / sharpsl_ad_index);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i=0; i<5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		sharpsl_pm.machinfo->measure_temp(1);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
-		sharpsl_pm.machinfo->measure_temp(0);
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp) {
-		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.machinfo->discharge(1);
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	sharpsl_pm.machinfo->discharge(0);
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < sharpsl_pm.machinfo->charge_on_volt)
-		return -1;
-
-	return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
-	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_scheduled_work();
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if(sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
-		{}
-
-	if (sharpsl_pm.machinfo->earlyresume)
-		sharpsl_pm.machinfo->earlyresume();
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		sharpsl_pm.machinfo->charge(0);
-		udelay(100);
-		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.machinfo->discharge(0);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
-	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
-			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		sharpsl_pm_led(SHARPSL_LED_ON);
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while(1) {
-			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
-	   			sharpsl_pm.full_count++;
-				sharpsl_pm.machinfo->charge(0);
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				sharpsl_pm.machinfo->charge(1);
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while(1) {
-		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-#else
-#define sharpsl_pm_suspend	NULL
-#define sharpsl_pm_resume	NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
-	.enter		= corgi_pxa_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-#endif
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
-	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->init();
-
-	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-	if (ret != 0)
-		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
-	suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
-	suspend_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->exit();
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- 	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index b2a781d9ce0..887c6eb3a18 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+	struct sys_device sysdev;
+
+	void __iomem	*base;
+	int		irq;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+	return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+	return 0;
+}
+
+struct sysdev_class vic_class = {
+	.name		= "vic",
+	.suspend	= vic_class_suspend,
+	.resume		= vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	struct vic_device *dev = vic_devices;
+	int err;
+	int id;
+
+	if (vic_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&vic_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < vic_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &vic_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(irq);
+	unsigned int off = irq & 31;
+
+	if (!v)
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= 1 << off;
+	else
+		v->resume_irqs &= ~(1 << off);
+
+	return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
+	.set_wake = vic_set_wake,
 };
 
 /**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
  * @base: iomem base address
  * @irq_start: starting interrupt number, must be muliple of 32
  * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
  */
 void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources)
+		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
 
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	vic_init2(base);
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 227da0843ea..d18d21bb41e 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Tue Aug 19 11:26:54 2008
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun  4 09:53:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -93,19 +106,13 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y
 # CONFIG_CPU_PXA310 is not set
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
 # CONFIG_MACH_TAVOREVB is not set
@@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
 CONFIG_PXA3xx=y
 # CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -241,6 +252,7 @@ CONFIG_IO_36=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
 CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
@@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,6 +474,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -604,11 +636,17 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 # CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_PXA2XX_AC97 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
 
 #
@@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1460,7 +1616,10 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b5be5..ac18662f38c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
 
 #
 # TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
 # DaVinci Core Type
 #
 CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
 
 #
 # DaVinci Board Type
 #
 CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3f89d5f25bc..3fb083b81b0 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,12 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:24 2006
+# Linux kernel version: 2.6.30-rc3
+# Tue May 19 12:26:49 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
@@ -138,14 +176,24 @@ CONFIG_CRUNCH=y
 #
 # EP93xx Platforms
 #
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
+CONFIG_MACH_EDB93XX=y
+CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9302A=y
+CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
-CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_MICRO9=y
+CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
+CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
 
 #
 # Processor Type
@@ -154,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
@@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
@@ -289,25 +358,15 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -317,20 +376,28 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -339,41 +406,39 @@ CONFIG_IPV6=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_TS7250=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_TS7250 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
 #
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# TPM devices
+# I2C Hardware Bus support
 #
-# CONFIG_TCG_TPM is not set
 
 #
-# I2C support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# I2C Algorithms
+# External I2C/SMBus adapter drivers
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# I2C Hardware Bus support
+# Other I2C/SMBus bus drivers
 #
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
 #
-# CONFIG_W1 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# Hardware Monitoring support
+# PCI GPIO expanders:
 #
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -732,158 +781,188 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index dcf8153a947..0a1abb978d7 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
@@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index f56837f69ca..957fd5fa27c 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 # CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
 # CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 # CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 00000000000..4b04290d8e8
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 00000000000..28be17fbc15
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 00000000000..23e43ea4efa
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,866 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Tue Jun  9 12:36:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 00000000000..213fe9c5eaa
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 5b98f764511..9e2385293ec 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da8cd..eb2cb31825c 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
new file mode 100644
index 00000000000..44461f197a1
--- /dev/null
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -0,0 +1,1141 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 02:44:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+# CONFIG_ARCH_STMP37XX is not set
+CONFIG_ARCH_STMP378X=y
+# CONFIG_MACH_STMP37XX is not set
+CONFIG_MACH_STMP378X=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_KOBJECT=y
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
new file mode 100644
index 00000000000..401279d531d
--- /dev/null
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -0,0 +1,1002 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29.1
+# Mon Apr 20 04:41:26 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+CONFIG_ARCH_STMP37XX=y
+# CONFIG_ARCH_STMP378X is not set
+CONFIG_MACH_STMP37XX=y
+# CONFIG_MACH_STMP378X is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_STMP_DBG is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
new file mode 100644
index 00000000000..2d827e12114
--- /dev/null
+++ b/arch/arm/configs/u300_defconfig
@@ -0,0 +1,1115 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Mon Jun  1 09:18:22 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_U300=y
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# ST-Ericsson AB U300/U330/U335/U365 Platform
+#
+
+#
+# ST-Ericsson Mobile Platform Products
+#
+CONFIG_MACH_U300=y
+
+#
+# ST-Ericsson U300/U330/U335/U365 Feature Selections
+#
+# CONFIG_MACH_U300_BS2X is not set
+# CONFIG_MACH_U300_BS330 is not set
+CONFIG_MACH_U300_BS335=y
+# CONFIG_MACH_U300_BS365 is not set
+# CONFIG_MACH_U300_SINGLE_RAM is not set
+CONFIG_MACH_U300_DUAL_RAM=y
+CONFIG_U300_DEBUG=y
+# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+
+#
+# All the settings below must match the bootloader's settings
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig
index 56bda7c6d67..5245655a0ad 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/w90p910_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8-git8
-# Sat Nov 15 10:05:00 2008
+# Linux kernel version: 2.6.30
+# Wed Jun 10 22:09:25 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -56,52 +63,53 @@ CONFIG_USER_NS=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_CPU_W90P910=y
 
 #
@@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M"
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
@@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 
@@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_W90X900=y
-# CONFIG_SERIAL_W90X900_PORT1 is not set
-# CONFIG_SERIAL_W90X900_PORT2 is not set
-# CONFIG_SERIAL_W90X900_PORT3 is not set
-# CONFIG_SERIAL_W90X900_PORT4 is not set
-CONFIG_SERIAL_W90X900_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
@@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 16b52f39798..9e07fe50702 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -249,6 +249,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	smp_mb()
 #define smp_mb__after_atomic_inc()	smp_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif
 #endif
diff --git a/arch/arm/include/asm/bitsperlong.h b/arch/arm/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/arm/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index bb7d695f390..1a711ea8418 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -429,6 +429,14 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 		__flush_anon_page(vma, page, vmaddr);
 }
 
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	/* highmem pages are always flushed upon kunmap already */
+	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
+		__cpuc_flush_dcache_page(page_address(page));
+}
+
 #define flush_dcache_mmap_lock(mapping) \
 	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 7b9d27e749b..b3e656c6fb7 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,21 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
+#define CPUID_EXT_PFR0	"c1, 0"
+#define CPUID_EXT_PFR1	"c1, 1"
+#define CPUID_EXT_DFR0	"c1, 2"
+#define CPUID_EXT_AFR0	"c1, 3"
+#define CPUID_EXT_MMFR0	"c1, 4"
+#define CPUID_EXT_MMFR1	"c1, 5"
+#define CPUID_EXT_MMFR2	"c1, 6"
+#define CPUID_EXT_MMFR3	"c1, 7"
+#define CPUID_EXT_ISAR0	"c2, 0"
+#define CPUID_EXT_ISAR1	"c2, 1"
+#define CPUID_EXT_ISAR2	"c2, 2"
+#define CPUID_EXT_ISAR3	"c2, 3"
+#define CPUID_EXT_ISAR4	"c2, 4"
+#define CPUID_EXT_ISAR5	"c2, 5"
+
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
 	({								\
@@ -18,9 +33,19 @@
 		    : "cc");						\
 		__val;							\
 	})
+#define read_cpuid_ext(ext_reg)						\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, " ext_reg		\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
 #else
 extern unsigned int processor_id;
 #define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
 #endif
 
 /*
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
deleted file mode 100644
index e521b70713c..00000000000
--- a/arch/arm/include/asm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 64f2252a25c..cdb9022716f 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -24,6 +24,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
+#define L2X0_TAG_LATENCY_CTRL		0x108
+#define L2X0_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
new file mode 100644
index 00000000000..6a6c66be7f6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -0,0 +1,138 @@
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS			(0x00)
+#define PL080_TC_STATUS				(0x04)
+#define PL080_TC_CLEAR				(0x08)
+#define PL080_ERR_STATUS			(0x0C)
+#define PL080_ERR_CLEAR				(0x10)
+#define PL080_RAW_TC_STATUS			(0x14)
+#define PL080_RAW_ERR_STATUS			(0x18)
+#define PL080_EN_CHAN				(0x1c)
+#define PL080_SOFT_BREQ				(0x20)
+#define PL080_SOFT_SREQ				(0x24)
+#define PL080_SOFT_LBREQ			(0x28)
+#define PL080_SOFT_LSREQ			(0x2C)
+
+#define PL080_CONFIG				(0x30)
+#define PL080_CONFIG_M2_BE			(1 << 2)
+#define PL080_CONFIG_M1_BE			(1 << 1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_SYNC				(0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR			(0x00)
+#define PL080_CH_DST_ADDR			(0x04)
+#define PL080_CH_LLI				(0x08)
+#define PL080_CH_CONTROL			(0x0C)
+#define PL080_CH_CONFIG				(0x10)
+#define PL080S_CH_CONTROL2			(0x10)
+#define PL080S_CH_CONFIG			(0x14)
+
+#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT			(2)
+#define PL080_LLI_LM_AHB2			(1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_SYS			(1 << 28)
+#define PL080_CONTROL_DST_INCR			(1 << 27)
+#define PL080_CONTROL_SRC_INCR			(1 << 26)
+#define PL080_CONTROL_DST_AHB2			(1 << 25)
+#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT		(21)
+#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT		(18)
+#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
+#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
+
+#define PL080_BSIZE_1				(0x0)
+#define PL080_BSIZE_4				(0x1)
+#define PL080_BSIZE_8				(0x2)
+#define PL080_BSIZE_16				(0x3)
+#define PL080_BSIZE_32				(0x4)
+#define PL080_BSIZE_64				(0x5)
+#define PL080_BSIZE_128				(0x6)
+#define PL080_BSIZE_256				(0x7)
+
+#define PL080_WIDTH_8BIT			(0x0)
+#define PL080_WIDTH_16BIT			(0x1)
+#define PL080_WIDTH_32BIT			(0x2)
+
+#define PL080_CONFIG_HALT			(1 << 18)
+#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
+#define PL080_CONFIG_LOCK			(1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
+#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT		(6)
+#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_FLOW_MEM2MEM			(0x0)
+#define PL080_FLOW_MEM2PER			(0x1)
+#define PL080_FLOW_PER2MEM			(0x2)
+#define PL080_FLOW_SRC2DST			(0x3)
+#define PL080_FLOW_SRC2DST_DST			(0x4)
+#define PL080_FLOW_MEM2PER_PER			(0x5)
+#define PL080_FLOW_PER2MEM_PER			(0x6)
+#define PL080_FLOW_SRC2DST_SRC			(0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+};
+
+struct pl080s_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+	u32	control1;
+};
+
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f87328d4a18..5d72550a809 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,7 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
new file mode 100644
index 00000000000..50c7e7cfd67
--- /dev/null
+++ b/arch/arm/include/asm/localtimer.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/include/asm/localtimer.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack()	twd_timer_ack()
+#define local_timer_stop()	twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f38e6..742c2aaeb02 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
 #endif
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index 54570d2e95b..fc26976d8e3 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ARM_MMAN_H__
 #define __ARM_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 7b522770f29..be962c1349c 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -202,6 +202,6 @@ typedef struct page *pgtable_t;
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c5461..1cd2d6416bd 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 	return __va(ptr);
 }
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 1845892260e..6a89567ffc5 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -71,6 +71,7 @@ struct thread_struct {
 		regs->ARM_cpsr = USR26_MODE;				\
 	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
 		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
 	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 236a06b9b7c..67b833c9b6b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -50,6 +50,7 @@
 #define PSR_F_BIT	0x00000040
 #define PSR_I_BIT	0x00000080
 #define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
 #define PSR_J_BIT	0x01000000
 #define PSR_Q_BIT	0x08000000
 #define PSR_V_BIT	0x10000000
@@ -65,6 +66,22 @@
 #define PSR_x		0x0000ff00	/* Extension		*/
 #define PSR_c		0x000000ff	/* Control		*/
 
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h
index d0fb487aba4..43ba0fb1c8a 100644
--- a/arch/arm/include/asm/signal.h
+++ b/arch/arm/include/asm/signal.h
@@ -111,7 +111,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index ada93a8fc2e..4fc1565e4f9 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -29,6 +29,7 @@
 #define SZ_512				0x00000200
 
 #define SZ_1K                           0x00000400
+#define SZ_2K                           0x00000800
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 5995935338e..a06e735b262 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p);
 asmlinkage void do_IPI(struct pt_regs *regs);
 
 /*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
  */
 extern void smp_init_cpus(void);
 
@@ -56,11 +56,6 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 extern void smp_cross_call(const struct cpumask *mask);
 
 /*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
-/*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
  */
@@ -101,43 +96,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 #define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
-/*
  * show local interrupt info
  */
 extern void show_local_irqs(struct seq_file *);
 
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
new file mode 100644
index 00000000000..2376835015d
--- /dev/null
+++ b/arch/arm/include/asm/smp_scu.h
@@ -0,0 +1,7 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
new file mode 100644
index 00000000000..7be0978b262
--- /dev/null
+++ b/arch/arm/include/asm/smp_twd.h
@@ -0,0 +1,12 @@
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
deleted file mode 100644
index cf0d0bdee74..00000000000
--- a/arch/arm/include/asm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASMARM_SUSPEND_H
-#define _ASMARM_SUSPEND_H
-
-#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a62218013c7..c964f3fc3bc 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -40,6 +40,12 @@
 #define TLB_V6_I_ASID	(1 << 18)
 
 #define TLB_BTB		(1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE	(1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -176,9 +182,17 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
+#ifdef CONFIG_SMP
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#else
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+#endif
+
 #ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v6wbi_tlb_flags
-# define v7wbi_always_flags	v6wbi_tlb_flags
+# define v7wbi_possible_flags	v7wbi_tlb_flags
+# define v7wbi_always_flags	v7wbi_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
@@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void)
 		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V7_UIS_FULL))
+		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V7_UIS_ASID))
+		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7897464e0c2..0da9bc9b3b1 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -386,7 +386,9 @@ do {									\
 #ifdef CONFIG_MMU
 extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
 extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
 #else
 #define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
 #define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 11a5197a221..ff89d0b3abc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 83b1da6b7ba..fc8af43c500 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -482,6 +482,9 @@ __und_usr:
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r0, r0				@ little endian instruction
+#endif
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b55cb033180..366e5097a41 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -210,6 +210,9 @@ ENTRY(vector_swi)
   A710(	teq	ip, #0x0f000000						)
   A710(	bne	.Larm710bug						)
 #endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	rev	r10, r10			@ little endian instruction
+#endif
 
 #elif defined(CONFIG_AEABI)
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3265a2e7cd..1585423699e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)do_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 80b8b5c7e07..93bb4247b7e 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 		 */
 		thumb = handler & 1;
 
-		if (thumb)
+		if (thumb) {
 			cpsr |= PSR_T_BIT;
-		else
+#if __LINUX_ARM_ARCH__ >= 7
+			/* clear the If-Then Thumb-2 execution state */
+			cpsr &= ~PSR_IT_MASK;
+#endif
+		} else
 			cpsr &= ~PSR_T_BIT;
 	}
 #endif
@@ -532,7 +536,7 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 	return err;
 }
 
-static inline void restart_syscall(struct pt_regs *regs)
+static inline void setup_syscall_restart(struct pt_regs *regs)
 {
 	regs->ARM_r0 = regs->ARM_ORIG_r0;
 	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
@@ -567,7 +571,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 			}
 			/* fallthrough */
 		case -ERESTARTNOINTR:
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 
@@ -691,7 +695,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		if (regs->ARM_r0 == -ERESTARTNOHAND ||
 		    regs->ARM_r0 == -ERESTARTSYS ||
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 	single_step_set(current);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6014dfd22af..de885fd256c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -22,16 +22,20 @@
 #include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/cputype.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
+#include <asm/localtimer.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void)
 	 * Take this CPU offline.  Once we clear this, we can't return,
 	 * and we must not schedule until we're ready to give up the cpu.
 	 */
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	/*
 	 * OK - migrate IRQs away from this CPU
@@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	local_fiq_enable();
 
 	/*
-	 * Setup local timer for this CPU.
+	 * Setup the percpu timer for this CPU.
 	 */
-	local_timer_setup();
+	percpu_timer_setup();
 
 	calibrate_delay();
 
@@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * OK, now it's safe to let the boot CPU continue
 	 */
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 
 	/*
 	 * OK, it's off to the idle thread for us
@@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
 static void ipi_timer(void)
 {
+	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
 	irq_enter();
-	local_timer_interrupt();
+	evt->event_handler(evt);
 	irq_exit();
 }
 
@@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+	send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+	evt->name	= "dummy_timer";
+	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
+			  CLOCK_EVT_FEAT_PERIODIC |
+			  CLOCK_EVT_FEAT_DUMMY;
+	evt->rating	= 400;
+	evt->mult	= 1;
+	evt->set_mode	= broadcast_timer_set_mode;
+	evt->broadcast	= smp_timer_broadcast;
+
+	clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+	evt->cpumask = cpumask_of(cpu);
+
+	local_timer_setup(evt);
+}
+
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu)
 	dump_stack();
 	spin_unlock(&stop_lock);
 
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	local_fiq_disable();
 	local_irq_disable();
@@ -501,11 +547,6 @@ void smp_send_reschedule(int cpu)
 	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_timer_broadcast(const struct cpumask *mask)
-{
-	send_ipi_message(mask, IPI_TIMER);
-}
-
 void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
@@ -545,6 +586,12 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
@@ -587,51 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	else
+		local_flush_tlb_all();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	else
+		local_flush_tlb_mm(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = uaddr;
-
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = uaddr;
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_page(vma, uaddr);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = kaddr;
-
-	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = kaddr;
+		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	} else
+		local_flush_tlb_kernel_page(kaddr);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_range(vma, start, end);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	} else
+		local_flush_tlb_kernel_range(start, end);
 }
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
new file mode 100644
index 00000000000..d3831f616ee
--- /dev/null
+++ b/arch/arm/kernel/smp_scu.c
@@ -0,0 +1,48 @@
+/*
+ *  linux/arch/arm/kernel/smp_scu.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+	u32 scu_ctrl;
+
+	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl |= 1;
+	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+	/*
+	 * Ensure that the data accessed by CPU0 before the SCU was
+	 * initialised is visible to the other CPUs.
+	 */
+	flush_cache_all();
+}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
new file mode 100644
index 00000000000..d8c88c633c6
--- /dev/null
+++ b/arch/arm/kernel/smp_twd.c
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/kernel/smp_twd.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+			struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* timer load already set up */
+		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+			| TWD_TIMER_CONTROL_PERIODIC;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+			struct clock_event_device *unused)
+{
+	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+	ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+	return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+	unsigned long load, count;
+	u64 waitjiffies;
+
+	/*
+	 * If this is the first time round, we need to work out how fast
+	 * the timer ticks
+	 */
+	if (twd_timer_rate == 0) {
+		printk(KERN_INFO "Calibrating local timer... ");
+
+		/* Wait for a tick to start */
+		waitjiffies = get_jiffies_64() + 1;
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		/* OK, now the tick has started, let's get the timer going */
+		waitjiffies += 5;
+
+				 /* enable, no interrupt or reload */
+		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+				 /* maximum value */
+		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+			(twd_timer_rate / 100000) % 100);
+	}
+
+	load = twd_timer_rate / HZ;
+
+	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+	unsigned long flags;
+
+	twd_calibrate_rate();
+
+	clk->name = "local_timer";
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->rating = 350;
+	clk->set_mode = twd_set_mode;
+	clk->set_next_event = twd_set_next_event;
+	clk->shift = 20;
+	clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+	/* Make sure our local interrupt controller has this enabled */
+	local_irq_save(flags);
+	get_irq_chip(clk->irq)->unmask(clk->irq);
+	local_irq_restore(flags);
+
+	clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index c90f27250ea..6c077979254 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -141,6 +141,7 @@ SECTIONS
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
+		_sdata = .;
 
 		/*
 		 * first, the init task union, aligned
@@ -192,6 +193,7 @@ SECTIONS
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
 		*(COMMON)
+		__bss_stop = .;
 		_end = .;
 	}
 					/* Stabs debugging sections.	*/
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 866f84a586f..030ba7219f4 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,6 +29,9 @@ else
 endif
 endif
 
+# using lib_ here won't override already available weak symbols
+obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
+
 lib-$(CONFIG_MMU) += $(mmu-y)
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 4d6bc71231f..844f56785eb 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -18,7 +18,8 @@
  *          : sz   - number of bytes to clear
  * Returns  : number of bytes NOT cleared
  */
-ENTRY(__clear_user)
+ENTRY(__clear_user_std)
+WEAK(__clear_user)
 		stmfd	sp!, {r1, lr}
 		mov	r2, #0
 		cmp	r1, #4
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 22f968bbdff..878820f0a32 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -86,7 +86,8 @@
 
 	.text
 
-ENTRY(__copy_to_user)
+ENTRY(__copy_to_user_std)
+WEAK(__copy_to_user)
 
 #include "copy_template.S"
 
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
new file mode 100644
index 00000000000..6b967ffb655
--- /dev/null
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -0,0 +1,228 @@
+/*
+ *  linux/arch/arm/lib/uaccess_with_memcpy.c
+ *
+ *  Written by: Lennert Buytenhek and Nicolas Pitre
+ *  Copyright (C) 2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h> /* for in_atomic() */
+#include <asm/current.h>
+#include <asm/page.h>
+
+static int
+pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
+{
+	unsigned long addr = (unsigned long)_addr;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	pgd = pgd_offset(current->mm, addr);
+	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
+		return 0;
+
+	pmd = pmd_offset(pgd, addr);
+	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+		return 0;
+
+	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
+	    !pte_write(*pte) || !pte_dirty(*pte))) {
+		pte_unmap_unlock(pte, ptl);
+		return 0;
+	}
+
+	*ptep = pte;
+	*ptlp = ptl;
+
+	return 1;
+}
+
+static unsigned long noinline
+__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
+{
+	int atomic;
+
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memcpy((void *)to, from, n);
+		return 0;
+	}
+
+	/* the mmap semaphore is taken only if not in an atomic context */
+	atomic = in_atomic();
+
+	if (!atomic)
+		down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(to, &pte, &ptl)) {
+			if (!atomic)
+				up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)to))
+				goto out;
+			if (!atomic)
+				down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memcpy((void *)to, from, tocopy);
+		to += tocopy;
+		from += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	if (!atomic)
+		up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	/*
+	 * This test is stubbed out of the main function above to keep
+	 * the overhead for small copies low by avoiding a large
+	 * register dump on the stack just to reload them right away.
+	 * With frame pointer disabled, tail call optimization kicks in
+	 * as well making this test almost invisible.
+	 */
+	if (n < 64)
+		return __copy_to_user_std(to, from, n);
+	return __copy_to_user_memcpy(to, from, n);
+}
+	
+static unsigned long noinline
+__clear_user_memset(void __user *addr, unsigned long n)
+{
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memset((void *)addr, 0, n);
+		return 0;
+	}
+
+	down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(addr, &pte, &ptl)) {
+			up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)addr))
+				goto out;
+			down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memset((void *)addr, 0, tocopy);
+		addr += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long __clear_user(void __user *addr, unsigned long n)
+{
+	/* See rational for this in __copy_to_user() above. */
+	if (n < 64)
+		return __clear_user_std(addr, n);
+	return __clear_user_memset(addr, n);
+}
+
+#if 0
+
+/*
+ * This code is disabled by default, but kept around in case the chosen
+ * thresholds need to be revalidated.  Some overhead (small but still)
+ * would be implied by a runtime determined variable threshold, and
+ * so far the measurement on concerned targets didn't show a worthwhile
+ * variation.
+ *
+ * Note that a fairly precise sched_clock() implementation is needed
+ * for results to make some sense.
+ */
+
+#include <linux/vmalloc.h>
+
+static int __init test_size_treshold(void)
+{
+	struct page *src_page, *dst_page;
+	void *user_ptr, *kernel_ptr;
+	unsigned long long t0, t1, t2;
+	int size, ret;
+
+	ret = -ENOMEM;
+	src_page = alloc_page(GFP_KERNEL);
+	if (!src_page)
+		goto no_src;
+	dst_page = alloc_page(GFP_KERNEL);
+	if (!dst_page)
+		goto no_dst;
+	kernel_ptr = page_address(src_page);
+	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+	if (!user_ptr)
+		goto no_vmap;
+
+	/* warm up the src page dcache */
+	ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE);
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size);
+		t1 = sched_clock();
+		ret |= __copy_to_user_std(user_ptr, kernel_ptr, size);
+		t2 = sched_clock();
+		printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __clear_user_memset(user_ptr, size);
+		t1 = sched_clock();
+		ret |= __clear_user_std(user_ptr, size);
+		t2 = sched_clock();
+		printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	if (ret)
+		ret = -EFAULT;
+
+	vunmap(user_ptr);
+no_vmap:
+	put_page(dst_page);
+no_dst:
+	put_page(src_page);
+no_src:
+	return ret;
+}
+
+subsys_initcall(test_size_treshold);
+
+#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index e263fda3e2d..970fd6b6753 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.det_pin 	= AT91_PIN_PC9,
+	.wp_pin 	= AT91_PIN_PC4,
 	.slot_b		= 1,
 	.wire4		= 1,
 };
@@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
 
 static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
 		I2C_BOARD_INFO("fm3130", 0x68),
 	}, {
 		I2C_BOARD_INFO("24c64", 0x50),
@@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
+	/* Audio */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 438efbb1748..cc270beadd5 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -235,7 +242,7 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* PCK0 provides MCLK to the WM8731 */
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e4345106ee5..bac578fe0d3 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
 #define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
 
 
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi()		(  cpu_is_at91cap9() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+
+#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+
+#define cpu_has_upll()		(0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp()		(!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
+
+
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
 
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
 };
 static struct clk uhpck = {
 	.name		= "uhpck",
-	.parent		= &pllb,
+	/*.parent		= ... we choose parent at runtime */
 	.mode		= pmc_sys_mode,
 };
 
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 		case AT91_PMC_CSS_PLLA:
 			return &plla;
 		case AT91_PMC_CSS_PLLB:
-			return &pllb;
+			if (cpu_has_upll())
+				/* CSS_PLLB == CSS_UPLL */
+				return &utmi_clk;
+			else if (cpu_has_pllb())
+				return &pllb;
 	}
 
 	return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 			u32	pckr;
 
 			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS_PLLB;	/* clock selection */
+			pckr &= AT91_PMC_CSS;	/* clock selection */
 			pckr |= prescale << 2;
 			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
 static void __init init_programmable_clock(struct clk *clk)
 {
 	struct clk	*parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-	if (!cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
 		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_utmi())
 		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+	if (cpu_has_upll())
+		seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
 	seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
 	&clk32k,
 	&main_clk,
 	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
 
 	/* MCK */
 	&mck
 };
 
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	uhpck.parent = &pllb;
+
+	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+	if (cpu_is_at91rm9200()) {
+		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+		udpck.pmc_mask = AT91RM9200_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+	} else if (cpu_is_at91cap9()) {
+		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+	}
+	at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init: choose 480 MHz from UPLL,
+	 */
+	unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+	/* Setup divider by 10 to reach 48 MHz */
+	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+	at91_sys_write(AT91_PMC_USB, usbr);
+
+	/* Now set uhpck values */
+	uhpck.parent = &utmi_clk;
+	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
 int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
-	   || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	if (cpu_is_at91rm9200()) {
-		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	} else if (cpu_is_at91cap9()) {
-		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+	if (cpu_has_upll() && !cpu_has_pllb()) {
+		/* setup UTMI clock as the fourth primary clock
+		 * (instead of pllb) */
+		utmi_clk.type |= CLK_TYPE_PRIMARY;
+		utmi_clk.id = 3;
 	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
-	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
 	/*
 	 * USB HS clock init
 	 */
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+	if (cpu_has_utmi())
 		/*
 		 * multiplier is hard-wired to 40
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-	}
+
+	/*
+	 * USB FS clock init
+	 */
+	if (cpu_has_pllb())
+		at91_pllb_usbfs_clock_init(main_clock);
+	if (cpu_has_upll())
+		/* assumes that we choose UPLL for USB and not PLLA */
+		at91_upll_usbfs_clock_init(main_clock);
 
 	/*
 	 * MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
-	if (cpu_is_at91rm9200())
+	if (cpu_is_at91rm9200()) {
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	else if (cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9g20()) {
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
-	} else
+	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+	}
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
+		list_add_tail(&pllb.node, &clocks);
+
+	if (cpu_has_uhp())
+		list_add_tail(&uhpck.node, &clocks);
+
+	if (cpu_has_udpfs())
+		list_add_tail(&udpck.node, &clocks);
+
+	if (cpu_has_utmi())
 		list_add_tail(&utmi_clk.node, &clocks);
 
 	/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33b8a9..64589eaaaee 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [AT91CAP9 revC only] */
+#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [CAP9 revC & some SAM9 only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
 #define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9, CAP9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
@@ -72,6 +72,7 @@
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
 #define			AT91_PMC_PRES_1			(0 << 2)
 #define			AT91_PMC_PRES_2			(1 << 2)
@@ -88,12 +89,25 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)
 #define			AT91_PMC_PDIV_2			(1 << 12)
+#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
+#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
+#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
 
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+#define	AT91_PMC_USB		(AT91_PMC + 0x38)	/* USB Clock Register [some SAM9 only] */
+#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
+#define			AT91_PMC_USBS_PLLA		(0 << 0)
+#define			AT91_PMC_USBS_UPLL		(1 << 0)
+#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
+#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
+#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
 
 #define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
 #define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
@@ -102,7 +116,7 @@
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9, AT91CAP9 only] */
 #define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc72b8..be747f5c6cd 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
 if ARCH_DAVINCI
 
+config AINTC
+	bool
+
+config CP_INTC
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM355
+        bool "DaVinci 355 based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM646x
+        bool "DaVinci 646x based system"
+	select AINTC
 
 comment "DaVinci Board Type"
 
@@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
 
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+	bool "TI DM355 EVM"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+	bool "DM355 Leopard board"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+	bool "TI DM6467 EVM"
+	depends on ARCH_DAVINCI_DM646x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM6467 EVM
+
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661942f..059ab78084b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
 #
 
 # Common objects
-obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o devices.o dma.o usb.o
+obj-y 			:= time.o clock.o serial.o io.o psc.o \
+			   gpio.o devices.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+
+obj-$(CONFIG_AINTC)			+= irq.o
+obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 00000000000..5ac2f565d86
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+		.platform_data = dm355evm_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355evm_msp");
+	gpio_direction_input(5);
+	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355evm_i2c_info,
+			ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04014000,
+		.end	= 0x04014001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04014002,
+		.end	= 0x04014003,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355evm_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355evm_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+	&dm355evm_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+	.get_cd		= dm355evm_mmc_get_cd,
+	.get_ro		= dm355evm_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_evm_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(1, "dm9000");
+	gpio_direction_input(1);
+	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_evm_devices,
+			     ARRAY_SIZE(davinci_evm_devices));
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355evm_mmc_config);
+	davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+			ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_evm_map_io,
+	.init_irq     = dm355_evm_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 00000000000..28c9008df4f
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+		.platform_data = dm355leopard_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355leopard_msp");
+	gpio_direction_input(5);
+	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355leopard_i2c_info,
+			ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04000000,
+		.end	= 0x04000001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04000016,
+		.end	= 0x04000017,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355leopard_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+	&dm355leopard_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+	.get_cd		= dm355leopard_mmc_get_cd,
+	.get_ro		= dm355leopard_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_leopard_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(9, "dm9000");
+	gpio_direction_input(9);
+	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_leopard_devices,
+			     ARRAY_SIZE(davinci_leopard_devices));
+	leopard_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355leopard_mmc_config);
+	davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+			ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_leopard_map_io,
+	.init_irq     = dm355_leopard_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c63bc..d9d40450bdc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
-#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
 #include <mach/mux.h>
 #include <mach/psc.h>
 #include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
-	DECLARE_MAC_BUF(mac_str);
-	char mac_addr[6];
-
-	at24_mem_acc = mem_acc;
-
-	/* Read MAC addr from EEPROM */
-	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
-		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
-		       print_mac(mac_str, mac_addr));
-	}
-}
 
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
-	.setup          = at24_setup,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
 };
 
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
 /*
  * MSP430 supports RTC, card detection, input from IR remote, and
  * a bit more.  It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void)
 	return (buf[3] << 8) | buf[2];
 }
 
+static int dm6444evm_mmc_get_cd(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+	.get_cd		= dm6444evm_mmc_get_cd,
+	.get_ro		= dm6444evm_mmc_get_ro,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
-	davinci_map_common_io();
 	dm644x_init();
 }
 
@@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 static __init void davinci_evm_init(void)
 {
 	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -671,8 +664,13 @@ static __init void davinci_evm_init(void)
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
 
+	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
 	davinci_serial_init(&uart_config);
 
+	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
 	/* Register the fixup for PHY on DaVinci */
 	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 					davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 00000000000..e17de635262
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK		(0x2)
+#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+	{ .name = "DS1", .active_low = 1, },
+	{ .name = "DS2", .active_low = 1, },
+	{ .name = "DS3", .active_low = 1, },
+	{ .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+	.num_leds = ARRAY_SIZE(evm_leds),
+	.leds     = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	struct gpio_led *leds = evm_leds;
+	int status;
+
+	while (ngpio--) {
+		leds->gpio = gpio++;
+		leds++;
+	};
+
+	evm_led_dev = platform_device_alloc("leds-gpio", 0);
+	platform_device_add_data(evm_led_dev, &evm_led_data,
+				sizeof(evm_led_data));
+
+	evm_led_dev->dev.parent = &client->dev;
+	status = platform_device_add(evm_led_dev);
+	if (status < 0) {
+		platform_device_put(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+				unsigned ngpio, void *c)
+{
+	if (evm_led_dev) {
+		platform_device_unregister(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int status;
+	int i;
+	char label[10];
+
+	for (i = 0; i < 4; ++i) {
+		snprintf(label, 10, "user_sw%d", i);
+		status = gpio_request(gpio, label);
+		if (status)
+			goto out_free;
+		evm_sw_gpio[i] = gpio++;
+
+		status = gpio_direction_input(evm_sw_gpio[i]);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+
+		status = gpio_export(evm_sw_gpio[i], 0);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+	}
+	return status;
+out_free:
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int i;
+
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_unexport(evm_sw_gpio[i]);
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	int status;
+
+	if (ngpio < 8)
+		return -EINVAL;
+
+	status = evm_sw_setup(client, gpio, 4, c);
+	if (status)
+		return status;
+
+	return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	BUG_ON(ngpio < 8);
+
+	evm_sw_teardown(client, gpio, 4, c);
+	evm_led_teardown(client, gpio+4, 4, c);
+
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+	.gpio_base	= DAVINCI_N_GPIO+1,
+	.setup		= evm_pcf_setup,
+	.teardown	= evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ *  - 0x7f00, 6 bytes Ethernet Address
+ *  - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data  = &eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &pcf_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq       = 100 /* kHz */,
+	.bus_delay      = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+	dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io       = davinci_map_io,
+	.init_irq     = davinci_dm646x_evm_irq_init,
+	.timer        = &davinci_timer,
+	.init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 00000000000..748a8e48541
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK		(0x2)
+#define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+	/* U-Boot Environment: Block 0
+	 * UBL:                Block 1
+	 * U-Boot:             Blocks 6-7 (256 kb)
+	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
+	 * Integrity Data:     Blocks 100-END
+	 */
+	{
+		.name		= "Linux Kernel",
+		.offset		= 32 * SZ_128K,
+		.size		= 16 * SZ_128K, /* 2 Mb */
+		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
+	},
+	{
+		.name		= "Linux ROOT",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * SZ_128K, /* 32 Mb */
+		.mask_flags	= 0, /* R/W */
+	},
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+	.parts		= davinci_sffsdr_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+	.name		= "davinci_nand", /* Name of driver */
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_sffsdr_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+	.resource	= davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+	.phy_mask	= SFFSDR_PHY_MASK,
+	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len	= (64*1024) / 8,
+	.page_size	= 32,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24lc64", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+	/* Other I2C devices:
+	 * MSP430,  addr 0x23 (not used)
+	 * PCA9543, addr 0x70 (setup done by U-Boot)
+	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+	 */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+	&davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+	dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	platform_add_devices(davinci_sffsdr_devices,
+			     ARRAY_SIZE(davinci_sffsdr_devices));
+	sffsdr_init_i2c();
+	davinci_serial_init(&uart_config);
+	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+	setup_usb(0, 0); /* We support only peripheral mode. */
+
+	/* mux VLYNQ pins */
+	davinci_cfg_reg(DM644X_VLYNQEN);
+	davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.map_io	      = davinci_sffsdr_map_io,
+	.init_irq     = davinci_sffsdr_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa15a57..39bf321d70a 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -164,11 +166,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec202f..27233cb4a2f 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@ struct clk {
 	u8			usecount;
 	u8			flags;
 	u8			lpsc;
+	u8			psc_ctlr;
 	struct clk              *parent;
 	struct pll_data         *pll_data;
 	u32                     div_reg;
@@ -93,4 +94,7 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
 #endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 00000000000..61ede19c6b5
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+	off_t offset = (off_t)context;
+
+	/* Read MAC addr from EEPROM */
+	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+	int i;
+	struct davinci_id *dip;
+	u8 variant = (jtag_id & 0xf0000000) >> 28;
+	u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+	for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+			i++, dip++)
+		/* Don't care about the manufacturer right now */
+		if ((dip->part_no == part_no) && (dip->variant == variant))
+			return dip;
+
+	return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+	int ret;
+	struct davinci_id *dip;
+
+	if (!soc_info) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+	if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+		iotable_init(davinci_soc_info.io_desc,
+				davinci_soc_info.io_desc_num);
+
+	/*
+	 * Normally devicemaps_init() would flush caches and tlb after
+	 * mdesc->map_io(), but we must also do it here because of the CPU
+	 * revision check below.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+
+	/*
+	 * We want to check CPU revision early for cpu_is_xxxx() macros.
+	 * IO space mapping must be initialized before we can do that.
+	 */
+	davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+	dip = davinci_get_id(davinci_soc_info.jtag_id);
+	if (!dip) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	davinci_soc_info.cpu_id = dip->cpu_id;
+	pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+	if (davinci_soc_info.cpu_clks) {
+		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+		if (ret != 0)
+			goto err;
+	}
+
+	davinci_intc_base = davinci_soc_info.intc_base;
+	davinci_intc_type = davinci_soc_info.intc_type;
+	return;
+
+err:
+	pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 00000000000..96c8e97a7de
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+	return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+	__raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+	/* XXX don't know why we need to disable nIRQ here... */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned reg		= BIT_WORD(irq);
+	unsigned mask		= BIT_MASK(irq);
+	unsigned polarity	= cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+	unsigned type		= cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		polarity |= mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		polarity &= ~mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		polarity |= mask;
+		type &= ~mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		polarity &= ~mask;
+		type &= ~mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+	cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+	return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+	.name		= "cp_intc",
+	.ack		= cp_intc_ack_irq,
+	.mask		= cp_intc_mask_irq,
+	.unmask		= cp_intc_unmask_irq,
+	.set_type	= cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio)
+{
+	unsigned num_reg	= BITS_TO_LONGS(num_irq);
+	int i;
+
+	cp_intc_base = base;
+
+	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+	/* Disable all host interrupts */
+	cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+	/* Disable system interrupts */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+	/* Set to normal mode, no nesting, no priority hold */
+	cp_intc_write(0, CP_INTC_CTRL);
+	cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+	/* Clear system interrupt status */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+	/* Enable nIRQ (what about nFIQ?) */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+	/*
+	 * Priority is determined by host channel: lower channel number has
+	 * higher priority i.e. channel 0 has highest priority and channel 31
+	 * had the lowest priority.
+	 */
+	num_reg = (num_irq + 3) >> 2;	/* 4 channels per register */
+	if (irq_prio) {
+		unsigned j, k;
+		u32 val;
+
+		for (k = i = 0; i < num_reg; i++) {
+			for (val = j = 0; j < 4; j++, k++) {
+				val >>= 8;
+				if (k < num_irq)
+					val |= irq_prio[k] << 24;
+			}
+
+			cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+		}
+	} else	{
+		/*
+		 * Default everything to channel 15 if priority not specified.
+		 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+		 * are mapped to nIRQ.
+		 */
+		for (i = 0; i < num_reg; i++)
+			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+	}
+
+	/* Set up genirq dispatching for cp_intc */
+	for (i = 0; i < num_irq; i++) {
+		set_irq_chip(i, &cp_intc_irq_chip);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		set_irq_handler(i, handle_edge_irq);
+	}
+
+	/* Enable global interrupt */
+	cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b93dd..de16f347566 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
 
 #define DAVINCI_I2C_BASE	     0x01C21000
+#define DAVINCI_MMCSD0_BASE	     0x01E10000
+#define DM355_MMCSD0_BASE	     0x01E11000
+#define DM355_MMCSD1_BASE	     0x01E00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 	(void) platform_device_register(&davinci_i2c_device);
 }
 
+#if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+	{
+		/* different on dm355 */
+		.start = DAVINCI_MMCSD0_BASE,
+		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_MMCINT,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		/* different on dm355 */
+		.start = IRQ_SDIOINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = DAVINCI_DMA_MMCRXEVT,
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = DAVINCI_DMA_MMCTXEVT,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+	.name = "davinci_mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask = &mmcsd0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd0_resources),
+	.resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+	{
+		.start = DM355_MMCSD1_BASE,
+		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_DM355_MMCINT1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DM355_SDIOINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = 30,	/* rx */
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = 31,	/* tx */
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+	.name = "davinci_mmc",
+	.id = 1,
+	.dev = {
+		.dma_mask = &mmcsd1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd1_resources),
+	.resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+	struct platform_device	*pdev = NULL;
+
+	if (WARN_ON(cpu_is_davinci_dm646x()))
+		return;
+
+	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+	 *
+	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+	 * not handled right here ...
+	 */
+	switch (module) {
+	case 1:
+		if (!cpu_is_davinci_dm355())
+			break;
+
+		/* REVISIT we may not need all these pins if e.g. this
+		 * is a hard-wired SDIO device...
+		 */
+		davinci_cfg_reg(DM355_SD1_CMD);
+		davinci_cfg_reg(DM355_SD1_CLK);
+		davinci_cfg_reg(DM355_SD1_DATA0);
+		davinci_cfg_reg(DM355_SD1_DATA1);
+		davinci_cfg_reg(DM355_SD1_DATA2);
+		davinci_cfg_reg(DM355_SD1_DATA3);
+
+		pdev = &davinci_mmcsd1_device;
+		break;
+	case 0:
+		if (cpu_is_davinci_dm355()) {
+			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
+			davinci_cfg_reg(DM355_MMCSD0);
+
+			/* enable RX EDMA */
+			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+		}
+
+		else if (cpu_is_davinci_dm644x()) {
+			/* REVISIT: should this be in board-init code? */
+			void __iomem *base =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+			/* Power-on 3.3V IO cells */
+			__raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+			/*Set up the pull regiter for MMC */
+			davinci_cfg_reg(DM644X_MSTK);
+		}
+
+		pdev = &davinci_mmcsd0_device;
+		break;
+	}
+
+	if (WARN_ON(!pdev))
+		return;
+
+	pdev->dev.platform_data = config;
+	platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+	platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER0_BASE),
+		.bottom_irq	= IRQ_TINT0_TINT12,
+		.top_irq	= IRQ_TINT0_TINT34,
+	},
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER1_BASE),
+		.bottom_irq	= IRQ_TINT1_TINT12,
+		.top_irq	= IRQ_TINT1_TINT34,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	davinci_init_wdt();
+
+	return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 00000000000..baaaf328de2
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+	.flags     = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+	.flags     = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	/* FIXME -- crystal rate is board-specific */
+	.rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+	.name = "vpss_dac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+	.name = "clkout1",
+	.parent = &pll1_aux_clk,
+	/* NOTE:  clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+	.name = "clkout2",
+	.parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+	.name = "clkout3",
+	.parent = &pll2_sysclkbp,
+	/* NOTE:  clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+	.name = "arm_clk",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ *   - in SyncReset state by default
+ *	.lpsc = DAVINCI_LPSC_TPCC,
+ *	.lpsc = DAVINCI_LPSC_TPTC0,
+ *	.lpsc = DAVINCI_LPSC_TPTC1,
+ *	.lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ *	.lpsc = DAVINCI_LPSC_MEMSTICK,
+ *   - in Enabled state by default
+ *	.lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ *	.lpsc = DAVINCI_LPSC_SCR2,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR3,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR4,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_CROSSBAR,	// "emulation"
+ *	.lpsc = DAVINCI_LPSC_CFG27,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG3,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG5,	// "test"
+ */
+
+static struct clk mjcp_clk = {
+	.name = "mjcp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+	.name = "asp1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+	.name = "mmcsd0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name = "mmcsd1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name = "spi0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name = "spi1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name = "spi2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name = "pwm3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+	.name = "timer3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+	.name = "rto",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "clkout2", &clkout2_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "clkout3", &clkout3_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK(NULL, "spi0", &spi0_clk),
+	CLK(NULL, "spi1", &spi1_clk),
+	CLK(NULL, "spi2", &spi2_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+	{
+		.start = 0x01c66000,
+		.end   = 0x01c667ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM355_SPINT0_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* Not yet used, so not included:
+	 * IORESOURCE_IRQ:
+	 *  - IRQ_DM355_SPINT0_0
+	 * IORESOURCE_DMA:
+	 *  - DAVINCI_DMA_SPI_SPIX
+	 *  - DAVINCI_DMA_SPI_SPIR
+	 */
+};
+
+static struct platform_device dm355_spi0_device = {
+	.name = "spi_davinci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &dm355_spi0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
+	.resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len)
+{
+	/* for now, assume we need MISO */
+	davinci_cfg_reg(DM355_SPI0_SDI);
+
+	/* not all slaves will be wired up */
+	if (chipselect_mask & BIT(0))
+		davinci_cfg_reg(DM355_SPI0_SDENA0);
+	if (chipselect_mask & BIT(1))
+		davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+	spi_register_board_info(info, len);
+
+	platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
+
+MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
+
+MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
+MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
+
+MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
+
+MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
+
+INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
+
+EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
+EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
+EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM355_CCDC_VDINT0]		= 2,
+	[IRQ_DM355_CCDC_VDINT1]		= 6,
+	[IRQ_DM355_CCDC_VDINT2]		= 6,
+	[IRQ_DM355_IPIPE_HST]		= 6,
+	[IRQ_DM355_H3AINT]		= 6,
+	[IRQ_DM355_IPIPE_SDR]		= 6,
+	[IRQ_DM355_IPIPEIFINT]		= 6,
+	[IRQ_DM355_OSDINT]		= 7,
+	[IRQ_DM355_VENCINT]		= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM355_RTOINT]		= 4,
+	[IRQ_DM355_UARTINT2]		= 7,
+	[IRQ_DM355_TINT6]		= 7,
+	[IRQ_CCINT0]			= 5,	/* dma */
+	[IRQ_CCERRINT]			= 5,	/* dma */
+	[IRQ_TCERRINT0]			= 5,	/* dma */
+	[IRQ_TCERRINT]			= 5,	/* dma */
+	[IRQ_DM355_SPINT2_1]		= 7,
+	[IRQ_DM355_TINT7]		= 4,
+	[IRQ_DM355_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM355_MMCINT1]		= 7,
+	[IRQ_DM355_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 7,
+	[IRQ_AEMIFINT]			= 7,
+	[IRQ_DM355_SDIOINT1]		= 4,
+	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 7,
+	[IRQ_PWMINT2]			= 7,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM355_SPINT0_0]		= 3,
+	[IRQ_DM355_SPINT0_1]		= 3,
+	[IRQ_DM355_GPIO0]		= 3,
+	[IRQ_DM355_GPIO1]		= 7,
+	[IRQ_DM355_GPIO2]		= 4,
+	[IRQ_DM355_GPIO3]		= 4,
+	[IRQ_DM355_GPIO4]		= 7,
+	[IRQ_DM355_GPIO5]		= 7,
+	[IRQ_DM355_GPIO6]		= 7,
+	[IRQ_DM355_GPIO7]		= 7,
+	[IRQ_DM355_GPIO8]		= 7,
+	[IRQ_DM355_GPIO9]		= 7,
+	[IRQ_DM355_GPIOBNK0]		= 7,
+	[IRQ_DM355_GPIOBNK1]		= 7,
+	[IRQ_DM355_GPIOBNK2]		= 7,
+	[IRQ_DM355_GPIOBNK3]		= 7,
+	[IRQ_DM355_GPIOBNK4]		= 7,
+	[IRQ_DM355_GPIOBNK5]		= 7,
+	[IRQ_DM355_GPIOBNK6]		= 7,
+	[IRQ_COMMTX]			= 7,
+	[IRQ_COMMRX]			= 7,
+	[IRQ_EMUINT]			= 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+	12, 13, 24, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm355_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb73b,
+		.manufacturer	= 0x00f,
+		.cpu_id		= DAVINCI_CPU_ID_DM355,
+		.name		= "dm355",
+	},
+};
+
+static void __iomem *dm355_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DM355_UART2_BASE,
+		.irq		= IRQ_DM355_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm355_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm355_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+	.io_desc		= dm355_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm355_ids,
+	.ids_num		= ARRAY_SIZE(dm355_ids),
+	.cpu_clks		= dm355_clks,
+	.psc_bases		= dm355_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm355_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm355_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm355_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= IRQ_DM355_GPIOBNK0,
+	.serial_dev		= &dm355_serial_device,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+	if (!cpu_is_davinci_dm355())
+		return 0;
+
+	davinci_cfg_reg(DM355_INT_EDMA_CC);
+	platform_device_register(&dm355_edma_device);
+	return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef192ea..fb5449b3c97 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
 #include <mach/clock.h>
@@ -20,6 +24,9 @@
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = {
 	CLK(NULL, NULL, NULL),
 };
 
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM644X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_1,
+};
 
 static struct resource dm644x_emac_resources[] = {
 	{
@@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = {
 static struct platform_device dm644x_emac_device = {
        .name		= "davinci_emac",
        .id		= 1,
+       .dev = {
+	       .platform_data	= &dm644x_emac_pdata,
+       },
        .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
        .resource	= dm644x_emac_resources,
 };
 
-#endif
+#define PINMUX0		0x00
+#define PINMUX1		0x04
 
 /*
  * Device specific mux setup
@@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = {
  *				reg  offset mask  mode
  */
 static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
 MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
@@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
 
 MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
 MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+#endif
 };
 
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]		= 2,
+	[IRQ_VDINT1]		= 6,
+	[IRQ_VDINT2]		= 6,
+	[IRQ_HISTINT]		= 6,
+	[IRQ_H3AINT]		= 6,
+	[IRQ_PRVUINT]		= 6,
+	[IRQ_RSZINT]		= 6,
+	[7]			= 7,
+	[IRQ_VENCINT]		= 6,
+	[IRQ_ASQINT]		= 6,
+	[IRQ_IMXINT]		= 6,
+	[IRQ_VLCDINT]		= 6,
+	[IRQ_USBINT]		= 4,
+	[IRQ_EMACINT]		= 4,
+	[14]			= 7,
+	[15]			= 7,
+	[IRQ_CCINT0]		= 5,	/* dma */
+	[IRQ_CCERRINT]		= 5,	/* dma */
+	[IRQ_TCERRINT0]		= 5,	/* dma */
+	[IRQ_TCERRINT]		= 5,	/* dma */
+	[IRQ_PSCIN]		= 7,
+	[21]			= 7,
+	[IRQ_IDE]		= 4,
+	[23]			= 7,
+	[IRQ_MBXINT]		= 7,
+	[IRQ_MBRINT]		= 7,
+	[IRQ_MMCINT]		= 7,
+	[IRQ_SDIOINT]		= 7,
+	[28]			= 7,
+	[IRQ_DDRINT]		= 7,
+	[IRQ_AEMIFINT]		= 7,
+	[IRQ_VLQINT]		= 4,
+	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
+	[IRQ_PWMINT0]		= 7,
+	[IRQ_PWMINT1]		= 7,
+	[IRQ_PWMINT2]		= 7,
+	[IRQ_I2C]		= 3,
+	[IRQ_UARTINT0]		= 3,
+	[IRQ_UARTINT1]		= 3,
+	[IRQ_UARTINT2]		= 3,
+	[IRQ_SPINT0]		= 3,
+	[IRQ_SPINT1]		= 3,
+	[45]			= 7,
+	[IRQ_DSP2ARM0]		= 4,
+	[IRQ_DSP2ARM1]		= 4,
+	[IRQ_GPIO0]		= 7,
+	[IRQ_GPIO1]		= 7,
+	[IRQ_GPIO2]		= 7,
+	[IRQ_GPIO3]		= 7,
+	[IRQ_GPIO4]		= 7,
+	[IRQ_GPIO5]		= 7,
+	[IRQ_GPIO6]		= 7,
+	[IRQ_GPIO7]		= 7,
+	[IRQ_GPIOBNK0]		= 7,
+	[IRQ_GPIOBNK1]		= 7,
+	[IRQ_GPIOBNK2]		= 7,
+	[IRQ_GPIOBNK3]		= 7,
+	[IRQ_GPIOBNK4]		= 7,
+	[IRQ_COMMTX]		= 7,
+	[IRQ_COMMRX]		= 7,
+	[IRQ_EMUINT]		= 7,
+};
 
 /*----------------------------------------------------------------------*/
 
@@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = {
 };
 
 /*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00008000),
+		.length		= SZ_16K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446",
+	},
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm644x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm644x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+	.io_desc		= dm644x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm644x_ids,
+	.ids_num		= ARRAY_SIZE(dm644x_ids),
+	.cpu_clks		= dm644x_clks,
+	.psc_bases		= dm644x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm644x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios 	= dm644x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm644x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 71,
+	.gpio_irq		= IRQ_GPIOBNK0,
+	.serial_dev		= &dm644x_serial_device,
+	.emac_pdata		= &dm644x_emac_pdata,
+	.sram_dma		= 0x00008000,
+	.sram_len		= SZ_16K,
+};
+
 void __init dm644x_init(void)
 {
-	davinci_clk_init(dm644x_clks);
-	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+	davinci_common_init(&davinci_soc_info_dm644x);
 }
 
 static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void)
 		return 0;
 
 	platform_device_register(&dm644x_edma_device);
+	platform_device_register(&dm644x_emac_device);
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 00000000000..334f0711e0f
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ		27000000
+#define DM646X_AUX_FREQ		24000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+	.name = "aux_clkin",
+	.rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name = "pll1_sysclk6",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name = "pll1_sysclk8",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name = "pll1_sysclk9",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2_clk",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DM646X_LPSC_C64X_CPU,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "I2CCLK",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_AEMIF,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM0,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM1,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_sysclk3,
+	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+	.name = "vpif0",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSMSTR,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+	.name = "vpif1",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSSLV,
+	.flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "aux", &aux_clkin),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "vpif0", &vpif0_clk),
+	CLK(NULL, "vpif1", &vpif1_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM646X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+	{
+		.start	= DM646X_EMAC_BASE,
+		.end	= DM646X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXTHINT,
+		.end	= IRQ_DM646X_EMACRXTHINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXINT,
+		.end	= IRQ_DM646X_EMACRXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACTXINT,
+		.end	= IRQ_DM646X_EMACTXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACMISCINT,
+		.end	= IRQ_DM646X_EMACMISCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm646x_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm646x_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
+	.resource	= dm646x_emac_resources,
+};
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+
+MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
+
+MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
+
+MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
+
+MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM646X_VP_VERTINT0]        = 7,
+	[IRQ_DM646X_VP_VERTINT1]        = 7,
+	[IRQ_DM646X_VP_VERTINT2]        = 7,
+	[IRQ_DM646X_VP_VERTINT3]        = 7,
+	[IRQ_DM646X_VP_ERRINT]          = 7,
+	[IRQ_DM646X_RESERVED_1]         = 7,
+	[IRQ_DM646X_RESERVED_2]         = 7,
+	[IRQ_DM646X_WDINT]              = 7,
+	[IRQ_DM646X_CRGENINT0]          = 7,
+	[IRQ_DM646X_CRGENINT1]          = 7,
+	[IRQ_DM646X_TSIFINT0]           = 7,
+	[IRQ_DM646X_TSIFINT1]           = 7,
+	[IRQ_DM646X_VDCEINT]            = 7,
+	[IRQ_DM646X_USBINT]             = 7,
+	[IRQ_DM646X_USBDMAINT]          = 7,
+	[IRQ_DM646X_PCIINT]             = 7,
+	[IRQ_CCINT0]                    = 7,    /* dma */
+	[IRQ_CCERRINT]                  = 7,    /* dma */
+	[IRQ_TCERRINT0]                 = 7,    /* dma */
+	[IRQ_TCERRINT]                  = 7,    /* dma */
+	[IRQ_DM646X_TCERRINT2]          = 7,
+	[IRQ_DM646X_TCERRINT3]          = 7,
+	[IRQ_DM646X_IDE]                = 7,
+	[IRQ_DM646X_HPIINT]             = 7,
+	[IRQ_DM646X_EMACRXTHINT]        = 7,
+	[IRQ_DM646X_EMACRXINT]          = 7,
+	[IRQ_DM646X_EMACTXINT]          = 7,
+	[IRQ_DM646X_EMACMISCINT]        = 7,
+	[IRQ_DM646X_MCASP0TXINT]        = 7,
+	[IRQ_DM646X_MCASP0RXINT]        = 7,
+	[IRQ_AEMIFINT]                  = 7,
+	[IRQ_DM646X_RESERVED_3]         = 7,
+	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
+	[IRQ_PWMINT0]                   = 7,
+	[IRQ_PWMINT1]                   = 7,
+	[IRQ_DM646X_VLQINT]             = 7,
+	[IRQ_I2C]                       = 7,
+	[IRQ_UARTINT0]                  = 7,
+	[IRQ_UARTINT1]                  = 7,
+	[IRQ_DM646X_UARTINT2]           = 7,
+	[IRQ_DM646X_SPINT0]             = 7,
+	[IRQ_DM646X_SPINT1]             = 7,
+	[IRQ_DM646X_DSP2ARMINT]         = 7,
+	[IRQ_DM646X_RESERVED_4]         = 7,
+	[IRQ_DM646X_PSCINT]             = 7,
+	[IRQ_DM646X_GPIO0]              = 7,
+	[IRQ_DM646X_GPIO1]              = 7,
+	[IRQ_DM646X_GPIO2]              = 7,
+	[IRQ_DM646X_GPIO3]              = 7,
+	[IRQ_DM646X_GPIO4]              = 7,
+	[IRQ_DM646X_GPIO5]              = 7,
+	[IRQ_DM646X_GPIO6]              = 7,
+	[IRQ_DM646X_GPIO7]              = 7,
+	[IRQ_DM646X_GPIOBNK0]           = 7,
+	[IRQ_DM646X_GPIOBNK1]           = 7,
+	[IRQ_DM646X_GPIOBNK2]           = 7,
+	[IRQ_DM646X_DDRINT]             = 7,
+	[IRQ_DM646X_AEMIFINT]           = 7,
+	[IRQ_COMMTX]                    = 7,
+	[IRQ_COMMRX]                    = 7,
+	[IRQ_EMUINT]                    = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+	 0,  1,  2,  3, 13,
+	14, 15, 24, 25, 26,
+	27, 30, 31, 54, 55,
+	56,
+	-1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 6,	/* 0-1, 4-7 */
+	.n_slot		= 512,
+	.n_tc		= 4,
+	.noevent	= dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm646x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb770,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6467,
+		.name		= "dm6467",
+	},
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_DM646X_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm646x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm646x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+	.io_desc		= dm646x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm646x_ids,
+	.ids_num		= ARRAY_SIZE(dm646x_ids),
+	.cpu_clks		= dm646x_clks,
+	.psc_bases		= dm646x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm646x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm646x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm646x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 43, /* Only 33 usable */
+	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
+	.serial_dev		= &dm646x_serial_device,
+	.emac_pdata		= &dm646x_emac_pdata,
+	.sram_dma		= 0x10010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm646x())
+		return 0;
+
+	platform_device_register(&dm646x_edma_device);
+	platform_device_register(&dm646x_emac_device);
+	return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c6351..1b6532159c5 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
@@ -37,14 +38,13 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-static unsigned __initdata ngpio;
-
 /* create a non-inlined version */
 static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
 
+static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
@@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int __init davinci_gpio_setup(void)
 {
 	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	/* The gpio banks conceptually expose a segmented bitmap,
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
 	 * and "ngpio" is one more than the largest zero-based
 	 * bit index that's valid.
 	 */
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		ngpio = 104;
-	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
-		ngpio = 71;
-	} else if (cpu_is_davinci_dm646x()) {
-		/* NOTE:  each bank has several "reserved" bits,
-		 * unusable as GPIOs.  Only 33 of the GPIO numbers
-		 * are usable, and we're not rejecting the others.
-		 */
-		ngpio = 43;
-	} else {
-		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
 		pr_err("GPIO setup:  how many GPIOs?\n");
 		return -EINVAL;
 	}
@@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void)
 		gpiochip_add(&chips[i].chip);
 	}
 
+	davinci_gpio_irq_setup();
 	return 0;
 }
 pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
 	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	unsigned status = irq_desc[irq].status;
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
 
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+	if (status & IRQ_TYPE_EDGE_FALLING)
 		__raw_writel(mask, &g->set_falling);
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+	if (status & IRQ_TYPE_EDGE_RISING)
 		__raw_writel(mask, &g->set_rising);
 }
 
@@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger)
 	irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
 	irq_desc[irq].status |= trigger;
 
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
+	/* don't enable the IRQ if it's currently disabled */
+	if (irq_desc[irq].depth == 0) {
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+			     ? &g->set_falling : &g->clr_falling);
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+			     ? &g->set_rising : &g->clr_rising);
+	}
 	return 0;
 }
 
@@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		mask <<= 16;
 
 	/* temporarily mask (level sensitive) parent IRQ */
+	desc->chip->mask(irq);
 	desc->chip->ack(irq);
 	while (1) {
 		u32		status;
@@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
-	unsigned	bank_irq;
 	struct clk	*clk;
 	u32		binten = 0;
+	unsigned	ngpio, bank_irq;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	ngpio = soc_info->gpio_num;
 
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		bank_irq = IRQ_DM355_GPIOBNK0;
-	} else if (cpu_is_davinci_dm644x()) {
-		bank_irq = IRQ_GPIOBNK0;
-	} else if (cpu_is_davinci_dm646x()) {
-		bank_irq = IRQ_DM646X_GPIOBNK0;
-	} else {
+	bank_irq = soc_info->gpio_irq;
+	if (bank_irq == 0) {
 		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
 		return -EINVAL;
 	}
@@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void)
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, (void *__iomem)
-		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+	__raw_writel(binten, soc_info->gpio_base + 0x08);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994cd79..00000000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
-	u8	variant;	/* JTAG ID bits 31:28 */
-	u16	part_no;	/* JTAG ID bits 27:12 */
-	u32	manufacturer;	/* JTAG ID bits 11:1 */
-	u32	type;		/* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
-	{
-		/* DM6446 */
-		.part_no      = 0xb700,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type	      = 0x64460000,
-	},
-	{
-		/* DM646X */
-		.part_no      = 0xb770,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type         = 0x64670000,
-	},
-	{
-		/* DM355 */
-		.part_no	= 0xb73b,
-		.variant	= 0x0,
-		.manufacturer	= 0x00f,
-		.type		= 0x03550000,
-	},
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
-	u32 dev_id, part_no;
-
-	dev_id = __raw_readl(JTAG_ID_BASE);
-
-	part_no = ((dev_id >> 12) & 0xffff);
-
-	return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
-	u32 variant;
-
-	variant = __raw_readl(JTAG_ID_BASE);
-
-	variant = (variant >> 28) & 0xf;
-
-	return variant;
-}
-
-unsigned int davinci_rev(void)
-{
-	return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
-	int i;
-	u16 part_no;
-	u8 variant;
-
-	part_no = davinci_get_part_no();
-	variant = davinci_get_variant();
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == (davinci_ids[i].part_no)) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the dev revision */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == davinci_ids[i].part_no &&
-		    variant == davinci_ids[i].variant) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
-	       davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21c123..00000000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 19177097625..a1f03b606d8 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@ struct sys_timer;
 extern struct sys_timer davinci_timer;
 
 extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
 
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 
+struct davinci_timer_instance {
+	void __iomem	*base;
+	u32		bottom_irq;
+	u32		top_irq;
+	unsigned long	cmp_off;
+	unsigned int	cmp_irq;
+};
+
+struct davinci_timer_info {
+	struct davinci_timer_instance	*timers;
+	unsigned int			clockevent_id;
+	unsigned int			clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+	struct map_desc			*io_desc;
+	unsigned long			io_desc_num;
+	u32				cpu_id;
+	u32				jtag_id;
+	void __iomem			*jtag_id_base;
+	struct davinci_id		*ids;
+	unsigned long			ids_num;
+	struct davinci_clk		*cpu_clks;
+	void __iomem			**psc_bases;
+	unsigned long			psc_bases_num;
+	void __iomem			*pinmux_base;
+	const struct mux_config		*pinmux_pins;
+	unsigned long			pinmux_pins_num;
+	void __iomem			*intc_base;
+	int				intc_type;
+	u8				*intc_irq_prios;
+	unsigned long			intc_irq_num;
+	struct davinci_timer_info	*timer_info;
+	void __iomem			*wdt_base;
+	void __iomem			*gpio_base;
+	unsigned			gpio_num;
+	unsigned			gpio_irq;
+	struct platform_device		*serial_dev;
+	struct emac_platform_data	*emac_pdata;
+	dma_addr_t			sram_dma;
+	unsigned			sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT	0xfffe0000
+#define SRAM_SIZE	SZ_128K
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 00000000000..c4d27eec806
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV			0x00
+#define CP_INTC_CTRL			0x04
+#define CP_INTC_HOST_CTRL		0x0C
+#define CP_INTC_GLOBAL_ENABLE		0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL	0x1C
+#define CP_INTC_SYS_STAT_IDX_SET	0x20
+#define CP_INTC_SYS_STAT_IDX_CLR	0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET	0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR	0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE	0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET	0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR	0x38
+#define CP_INTC_PACING_PRESCALE 	0x40
+#define CP_INTC_VECTOR_BASE		0x50
+#define CP_INTC_VECTOR_SIZE		0x54
+#define CP_INTC_VECTOR_NULL		0x58
+#define CP_INTC_PRIO_IDX		0x80
+#define CP_INTC_PRIO_VECTOR		0x84
+#define CP_INTC_SECURE_ENABLE		0x90
+#define CP_INTC_SECURE_PRIO_IDX 	0x94
+#define CP_INTC_PACING_PARAM(n) 	(0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n)		(0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n)		(0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) 	(0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) 	(0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n)	(0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n)	(0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n)		(0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n)		(0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n)	(0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) 	(0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n)		(0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n)	(0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) 	(0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n)	(0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n)	(0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n)		(0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio);
+
+#endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b3a66..d12a5ed2959 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
 
-#define IS_DAVINCI_CPU(type, id)			\
-static inline int is_davinci_dm ##type(void)	        \
-{							\
-	return (davinci_rev() == (id)) ? 1 : 0;	        \
+struct davinci_id {
+	u8	variant;	/* JTAG ID bits 31:28 */
+	u16	part_no;	/* JTAG ID bits 27:12 */
+	u16	manufacturer;	/* JTAG ID bits 11:1 */
+	u32	cpu_id;
+	char	*name;
+};
+
+/* Can use lower 16 bits of cpu id  for a variant when required */
+#define	DAVINCI_CPU_ID_DM6446		0x64460000
+#define	DAVINCI_CPU_ID_DM6467		0x64670000
+#define	DAVINCI_CPU_ID_DM355		0x03550000
+
+#define IS_DAVINCI_CPU(type, id)					\
+static inline int is_davinci_ ##type(void)				\
+{									\
+	return (davinci_soc_info.cpu_id == (id));			\
 }
 
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d06..de3fc2182b4 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
  * or implied.
  */
 
+/* Modifications
+ * Jan 2009	Chaithrika U S	Added senduart, busyuart, waituart
+ *				macros, based on debug-8250.S file
+ *				but using 32-bit accesses required for
+ *                              some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT	2
+
 		.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
@@ -17,5 +27,22 @@
 		orr	\rx, \rx, #0x00c20000   @ UART 0
 		.endm
 
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:		ldr	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 00000000000..54903b72438
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4e58b..15d42b92a8c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
 
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
+#include <mach/emac.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 00000000000..1fc764c8646
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE		(0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM646X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc5396daf..24a379239d7 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 00000000000..beff4fb7c84
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+	char mac_addr[ETH_ALEN];
+	u32 ctrl_reg_offset;
+	u32 ctrl_mod_reg_offset;
+	u32 ctrl_ram_offset;
+	u32 mdio_reg_offset;
+	u32 ctrl_ram_size;
+	u32 phy_mask;
+	u32 mdio_max_freq;
+	u8 rmii_en;
+	u8 version;
+};
+
+enum {
+	EMAC_VERSION_1,	/* DM644x */
+	EMAC_VERSION_2,	/* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f933b..fbdebc7cb40 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		ldr \base, =davinci_intc_base
+		ldr \base, [\base]
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+		ldr \tmp, =davinci_intc_type
+		ldr \tmp, [\tmp]
+		cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+		beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
 		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
+		movs \tmp, \tmp, lsr #2
 		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
+		b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001:		ldr \irqnr, [\base, #0x80] /* get irq number */
+		and \irqnr, \irqnr, #0xff  /* irq is in bits 0-9 */
+		mov \tmp, \irqnr, lsr #3
+		and \tmp, \tmp, #0xfc
+		add \tmp, \tmp, #0x280 /* get the register offset */
+		ldr \irqstat, [\base, \tmp] /* get the intc status */
+		cmp \irqstat, #0x0
+#endif
+1002:
 		.endm
 
 		.macro	irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281364e..ae074556831 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
+#include <mach/common.h>
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
@@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem
 __gpio_to_controller(unsigned gpio)
 {
 	void *__iomem ptr;
+	void __iomem *base = davinci_soc_info.gpio_base;
 
 	if (gpio < 32 * 1)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+		ptr = base + 0x10;
 	else if (gpio < 32 * 2)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+		ptr = base + 0x38;
 	else if (gpio < 32 * 3)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+		ptr = base + 0x88;
 	else
 		ptr = NULL;
 	return ptr;
@@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio)
 {
 	if (gpio >= DAVINCI_N_GPIO)
 		return -EINVAL;
-	return DAVINCI_N_AINTC_IRQ + gpio;
+	return davinci_soc_info.intc_irq_num + gpio;
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - DAVINCI_N_AINTC_IRQ;
+	return irq - davinci_soc_info.intc_irq_num;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 18066074c99..bc5d6aaa69a 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
 /* Base address */
 #define DAVINCI_ARM_INTC_BASE 0x01C48000
 
+#define DAVINCI_INTC_TYPE_AINTC		0
+#define DAVINCI_INTC_TYPE_CP_INTC	1
+
 /* Interrupt lines */
 #define IRQ_VDINT0       0
 #define IRQ_VDINT1       1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7f3ce..c712c7cdf38 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
  * Definitions
  **************************************************************************/
 #define DAVINCI_DDR_BASE    0x80000000
-#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
 
 #define PHYS_OFFSET DAVINCI_DDR_BASE
 
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 00000000000..5a85e24f367
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ *  Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+	/* get_cd()/get_wp() may sleep */
+	int	(*get_cd)(int module);
+	int	(*get_ro)(int module);
+	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+	u8	wires;
+
+	u32     max_freq;
+
+	/* any additional host capabilities: OR'd in to mmc->f_caps */
+	u32     caps;
+
+	/* Version of the MMC/SD controller */
+	u8	version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
+	MMC_CTLR_VERSION_2,	/* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb3e27..27378458542 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
 #ifndef __INC_MACH_MUX_H
 #define __INC_MACH_MUX_H
 
-/* System module registers */
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-/* dm355 only */
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define INTMUX			0x18
-#define EVTMUX			0x1c
-
 struct mux_config {
 	const char *name;
 	const char *mux_reg_name;
@@ -168,15 +158,9 @@ enum davinci_dm355_index {
 
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
-				unsigned long size);
 extern int davinci_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
-				       unsigned long size) { return 0; }
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d419fa..ab8a2586d1c 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
 #ifndef __ASM_ARCH_PSC_H
 #define __ASM_ARCH_PSC_H
 
+#define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
+
 /* Power and Sleep Controller (PSC) Domains */
 #define DAVINCI_GPSC_ARMDOMAIN      0
 #define DAVINCI_GPSC_DSPDOMAIN      1
@@ -116,8 +118,8 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
-			       char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable);
 
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d74a1..794fa5cf93c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
@@ -30,6 +28,6 @@ struct davinci_uart_config {
 	unsigned int enabled_uarts;
 };
 
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 00000000000..111f7cc71e0
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 00000000000..1c971d8d8ba
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
+
+enum {
+	T0_BOT,
+	T0_TOP,
+	T1_BOT,
+	T1_TOP,
+	NUM_TIMERS
+};
+
+#define IS_TIMER1(id)		(id & 0x2)
+#define IS_TIMER0(id)		(!IS_TIMER1(id))
+#define IS_TIMER_TOP(id)	((id & 0x1))
+#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165def37b..1e27475f9a2 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
 #include <linux/serial_reg.h>
 #include <mach/serial.h>
 
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+	/* Add logic here for new platforms, using __macine_arch_type */
+	return (u32 *)DAVINCI_UART0_BASE;
+}
+
 /* PORT_16C550A, in polled non-fifo mode */
 
 static void putc(char c)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
 
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
@@ -26,7 +39,9 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
+
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 }
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb513e..49912b48b1b 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
  */
 
 #include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init davinci_map_common_io(void)
-{
-	iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/* We want to check CPU revision early for cpu_is_xxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	davinci_check_revision();
-}
 
 #define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c90e29..af92ffee847 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
 
 #include <mach/hardware.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
@@ -41,18 +42,14 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
 static inline unsigned int davinci_irq_readl(int offset)
 {
-	return __raw_readl(INTC_BASE + offset);
+	return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-	__raw_writel(value, INTC_BASE + offset);
+	__raw_writel(value, davinci_intc_base + offset);
 }
 
 /* Disable interrupt */
@@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = {
 	.unmask = davinci_unmask_irq,
 };
 
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_AEMIFINT]                  = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
 	unsigned i;
-
-	if (cpu_is_davinci_dm644x())
-		davinci_def_priorities = dm644x_default_priorities;
-	else if (cpu_is_davinci_dm646x())
-		davinci_def_priorities = dm646x_default_priorities;
-	else if (cpu_is_davinci_dm355())
-		davinci_def_priorities = dm355_default_priorities;
+	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b247a4..d310f579aa8 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
-				unsigned long size)
-{
-	mux_table = pins;
-	pin_table_sz = size;
-
-	return 0;
-}
+#include <mach/common.h>
 
 /*
  * Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins,
 int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
-	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->pinmux_base;
 	unsigned long flags;
 	const struct mux_config *cfg;
 	unsigned int reg_orig = 0, reg = 0;
 	unsigned int mask, warn = 0;
 
-	if (!mux_table)
+	if (!soc_info->pinmux_pins)
 		BUG();
 
-	if (index >= pin_table_sz) {
+	if (index >= soc_info->pinmux_pins_num) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, soc_info->pinmux_pins_num);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = &mux_table[index];
+	cfg = &soc_info->pinmux_pins[index];
 
 	if (cfg->name == NULL) {
 		printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171abf5f7..a78b657e916 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
 #include <mach/psc.h>
 #include <mach/mux.h>
 
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
@@ -42,22 +40,42 @@
 #define MDSTAT_STATE_MASK 0x1f
 
 /* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
-	u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+	void __iomem *psc_base;
+	u32 mdstat;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return 0;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 
 	/* if clocked, state can be "Enable" or "SyncReset" */
 	return mdstat & BIT(12);
 }
 
 /* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+	void __iomem *psc_base;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 69507579652..c530c7333d0 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
 #include <mach/serial.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
+
 #include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
 }
 
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= IRQ_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 {
 	unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
 {
 	int i;
 	char name[16];
 	struct clk *uart_clk;
-	struct device *dev = &serial_device.dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+	struct plat_serial8250_port *p = dev->platform_data;
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
+	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
-
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->flags = 0;
+	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+		if (!(info->enabled_uarts & (1 << i)))
 			continue;
-		}
-
-		if (cpu_is_davinci_dm646x())
-			p->iotype = UPIO_MEM32;
-
-		if (cpu_is_davinci_dm355()) {
-			if (i == 2) {
-				p->mapbase = (unsigned long)DM355_UART2_BASE;
-				p->irq = IRQ_DM355_UARTINT2;
-			}
-		}
 
 		sprintf(name, "uart%d", i);
 		uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
 			davinci_serial_reset(p);
 		}
 	}
-}
 
-static int __init davinci_init(void)
-{
-	return platform_device_register(&serial_device);
+	return platform_device_register(soc_info->serial_dev);
 }
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 00000000000..db54b2a66b4
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+	unsigned long vaddr;
+	dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+	if (dma)
+		*dma = 0;
+	if (!sram_pool || (dma && !dma_base))
+		return NULL;
+
+	vaddr = gen_pool_alloc(sram_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	if (dma)
+		*dma = dma_base + (vaddr - SRAM_VIRT);
+	return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+	gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM:  as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+	unsigned len = davinci_soc_info.sram_len;
+	int status = 0;
+
+	if (len) {
+		len = min(len, SRAM_SIZE);
+		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+		if (!sram_pool)
+			status = -ENOMEM;
+	}
+	if (sram_pool)
+		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+	WARN_ON(status < 0);
+	return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01bff5c..0884ca57bfb 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -28,52 +29,41 @@
 #include <asm/errno.h>
 #include <mach/io.h>
 #include <mach/cputype.h>
+#include <mach/time.h>
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
 static unsigned int davinci_clock_tick_rate;
 
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE   (IO_PHYS + 0x21C00)
-
-enum {
-	T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id)    (id & 0x2)
-#define IS_TIMER0(id)    (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
-	IRQ_TINT0_TINT12,
-	IRQ_TINT0_TINT34,
-	IRQ_TINT1_TINT12,
-	IRQ_TINT1_TINT34,
-};
-
 /*
  * This driver configures the 2 64-bit count-up timers as 4 independent
  * 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
  */
-#define TID_CLOCKEVENT  T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+	TID_CLOCKEVENT,
+	TID_CLOCKSOURCE,
+};
 
 /* Timer register offsets */
-#define PID12                        0x0
-#define TIM12                        0x10
-#define TIM34                        0x14
-#define PRD12                        0x18
-#define PRD34                        0x1c
-#define TCR                          0x20
-#define TGCR                         0x24
-#define WDTCR                        0x28
+#define PID12			0x0
+#define TIM12			0x10
+#define TIM34			0x14
+#define PRD12			0x18
+#define PRD34			0x1c
+#define TCR			0x20
+#define TGCR			0x24
+#define WDTCR			0x28
+
+/* Offsets of the 8 compare registers */
+#define	CMP12_0			0x60
+#define	CMP12_1			0x64
+#define	CMP12_2			0x68
+#define	CMP12_3			0x6c
+#define	CMP12_4			0x70
+#define	CMP12_5			0x74
+#define	CMP12_6			0x78
+#define	CMP12_7			0x7c
 
 /* Timer register bitfields */
 #define TCR_ENAMODE_DISABLE          0x0
@@ -105,6 +95,7 @@ struct timer_s {
 	unsigned int id;
 	unsigned long period;
 	unsigned long opts;
+	unsigned long flags;
 	void __iomem *base;
 	unsigned long tim_off;
 	unsigned long prd_off;
@@ -114,30 +105,58 @@ struct timer_s {
 static struct timer_s timers[];
 
 /* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED   0x00
-#define TIMER_OPTS_ONESHOT    0x01
-#define TIMER_OPTS_PERIODIC   0x02
+#define TIMER_OPTS_DISABLED		0x01
+#define TIMER_OPTS_ONESHOT		0x02
+#define TIMER_OPTS_PERIODIC		0x04
+#define TIMER_OPTS_STATE_MASK		0x07
+
+#define TIMER_OPTS_USE_COMPARE		0x80000000
+#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+	[T0_BOT]	= "timer0_0",
+	[T0_TOP]	= "timer0_1",
+	[T1_BOT]	= "timer1_0",
+	[T1_TOP]	= "timer1_1",
+};
 
 static int timer32_config(struct timer_s *t)
 {
-	u32 tcr = __raw_readl(t->base + TCR);
-
-	/* disable timer */
-	tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-	__raw_writel(tcr, t->base + TCR);
-
-	/* reset counter to zero, set new period */
-	__raw_writel(0, t->base + t->tim_off);
-	__raw_writel(t->period, t->base + t->prd_off);
-
-	/* Set enable mode */
-	if (t->opts & TIMER_OPTS_ONESHOT) {
-		tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-	} else if (t->opts & TIMER_OPTS_PERIODIC) {
-		tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+	u32 tcr;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (USING_COMPARE(t)) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+		/*
+		 * Next interrupt should be the current time reg value plus
+		 * the new period (using 32-bit unsigned addition/wrapping
+		 * to 0 on overflow).  This assumes that the clocksource
+		 * is setup to count to 2^32-1 before wrapping around to 0.
+		 */
+		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+			t->base + dtip[event_timer].cmp_off);
+	} else {
+		tcr = __raw_readl(t->base + TCR);
+
+		/* disable timer */
+		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+		__raw_writel(tcr, t->base + TCR);
+
+		/* reset counter to zero, set new period */
+		__raw_writel(0, t->base + t->tim_off);
+		__raw_writel(t->period, t->base + t->prd_off);
+
+		/* Set enable mode */
+		if (t->opts & TIMER_OPTS_ONESHOT)
+			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+		else if (t->opts & TIMER_OPTS_PERIODIC)
+			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+		__raw_writel(tcr, t->base + TCR);
 	}
-
-	__raw_writel(tcr, t->base + TCR);
 	return 0;
 }
 
@@ -182,13 +201,14 @@ static struct timer_s timers[] = {
 
 static void __init timer_init(void)
 {
-	u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
 		u32 tgcr;
-		void __iomem *base = IO_ADDRESS(phys_bases[i]);
+		void __iomem *base = dtip[i].base;
 
 		/* Disabled, Internal clock source */
 		__raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@ static void __init timer_init(void)
 	/* Init of each timer as a 32-bit timer */
 	for (i=0; i< ARRAY_SIZE(timers); i++) {
 		struct timer_s *t = &timers[i];
-		u32 phys_base;
-
-		if (t->name) {
-			t->id = i;
-			phys_base = (IS_TIMER1(t->id) ?
-			       DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
-			t->base = IO_ADDRESS(phys_base);
-
-			if (IS_TIMER_BOT(t->id)) {
-				t->enamode_shift = 6;
-				t->tim_off = TIM12;
-				t->prd_off = PRD12;
-			} else {
-				t->enamode_shift = 22;
-				t->tim_off = TIM34;
-				t->prd_off = PRD34;
-			}
-
-			/* Register interrupt */
-			t->irqaction.name = t->name;
-			t->irqaction.dev_id = (void *)t;
-			if (t->irqaction.handler != NULL) {
-				setup_irq(timer_irqs[t->id], &t->irqaction);
-			}
-
-			timer32_config(&timers[i]);
+		int timer = ID_TO_TIMER(t->id);
+		u32 irq;
+
+		t->base = dtip[timer].base;
+
+		if (IS_TIMER_BOT(t->id)) {
+			t->enamode_shift = 6;
+			t->tim_off = TIM12;
+			t->prd_off = PRD12;
+			irq = dtip[timer].bottom_irq;
+		} else {
+			t->enamode_shift = 22;
+			t->tim_off = TIM34;
+			t->prd_off = PRD34;
+			irq = dtip[timer].top_irq;
+		}
+
+		/* Register interrupt */
+		t->irqaction.name = t->name;
+		t->irqaction.dev_id = (void *)t;
+
+		if (t->irqaction.handler != NULL) {
+			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+			setup_irq(irq, &t->irqaction);
 		}
+
+		timer32_config(&timers[i]);
 	}
 }
 
@@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_davinci = {
-	.name		= "timer0_1",
 	.rating		= 300,
 	.read		= read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode,
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts = TIMER_OPTS_PERIODIC;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_PERIODIC;
 		timer32_config(t);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts = TIMER_OPTS_ONESHOT;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_ONESHOT;
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts = TIMER_OPTS_DISABLED;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_DISABLED;
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_davinci = {
-	.name		= "timer0_0",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
@@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = {
 static void __init davinci_timer_init(void)
 {
 	struct clk *timer_clk;
-
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	unsigned int clockevent_id;
+	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
 
+	clockevent_id = soc_info->timer_info->clockevent_id;
+	clocksource_id = soc_info->timer_info->clocksource_id;
+
+	timers[TID_CLOCKEVENT].id = clockevent_id;
+	timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+	/*
+	 * If using same timer for both clock events & clocksource,
+	 * a compare register must be used to generate an event interrupt.
+	 * This is equivalent to a oneshot timer only (not periodic).
+	 */
+	if (clockevent_id == clocksource_id) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(clockevent_id);
+
+		/* Only bottom timers can use compare regs */
+		if (IS_TIMER_TOP(clockevent_id))
+			pr_warning("davinci_timer_init: Invalid use"
+				" of system timers.  Results unpredictable.\n");
+		else if ((dtip[event_timer].cmp_off == 0)
+				|| (dtip[event_timer].cmp_irq == 0))
+			pr_warning("davinci_timer_init:  Invalid timer instance"
+				" setup.  Results unpredictable.\n");
+		else {
+			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+		}
+	}
+
 	/* init timer hw */
 	timer_init();
 
@@ -325,6 +378,7 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
+	clocksource_davinci.name = id_to_name[clocksource_id];
 	clocksource_davinci.mult =
 		clocksource_khz2mult(davinci_clock_tick_rate/1000,
 				     clocksource_davinci.shift);
@@ -332,12 +386,12 @@ static void __init davinci_timer_init(void)
 		printk(err, clocksource_davinci.name);
 
 	/* setup clockevent */
+	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
 	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
 					 clockevent_davinci.shift);
 	clockevent_davinci.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_davinci);
+	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@ struct sys_timer davinci_timer = {
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
 	u32 tgcr, wdtcr;
-	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
-	struct device dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->wdt_base;
 	struct clk *wd_clk;
-	char *name = "watchdog";
 
-	dev_set_name(&dev, name);
-	wd_clk = clk_get(&dev, NULL);
+	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 56bddcef690..d7291c682a6 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,87 +9,135 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+choice
+	prompt "EP93xx first SDRAM bank selection"
+	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "0x00000000 - SDCE3/SyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+	bool "0xc0000000 - SDCEO"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xc0000000
+
+endchoice
+
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
 
+config MACH_EDB93XX
+	bool
+
+config MACH_EDB9301
+	bool "Support Cirrus Logic EDB9301"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9301 Evaluation Board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302A Evaluation Board.
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307 Evaluation Board.
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307A Evaluation Board.
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9312 Evaluation Board.
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315 Evaluation Board.
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
 config MACH_MICRO9
-        bool
-        default n
+	bool
 
 config MACH_MICRO9H
-       bool "Support Contec Hypercontrol Micro9-H"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-H board.
+	bool "Support Contec Hypercontrol Micro9-H"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-H board.
 
 config MACH_MICRO9M
-       bool "Support Contec Hypercontrol Micro9-M"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-M board.
+	bool "Support Contec Hypercontrol Micro9-M"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-M board.
 
 config MACH_MICRO9L
-       bool "Support Contec Hypercontrol Micro9-L"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-L board.
+	bool "Support Contec Hypercontrol Micro9-L"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-L board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 9522e205b73..eae6199a989 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,13 +7,7 @@ obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
-obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
-obj-$(CONFIG_MACH_EDB9307)	+= edb9307.o
-obj-$(CONFIG_MACH_EDB9307A)	+= edb9307a.o
-obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
-obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
-obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d5561ad15ba..27a085a8f12 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,2 +1,5 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
+   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b2eede5531c..6c4c1633ed1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,58 +72,58 @@ static struct clk clk_h;
 static struct clk clk_p;
 static struct clk clk_pll2;
 static struct clk clk_usb_host = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00020000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00010000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00080000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00040000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00200000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00100000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00800000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00400000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x02000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x01000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x04000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x08000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
 
 #define INIT_CK(dev,con,ck)					\
@@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL, "hclk", &clk_h),
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
 	INIT_CK(NULL, "m2p0", &clk_m2p0),
 	INIT_CK(NULL, "m2p1", &clk_m2p1),
 	INIT_CK(NULL, "m2p2", &clk_m2p2),
@@ -186,8 +186,8 @@ static unsigned long get_uart_rate(struct clk *clk)
 {
 	u32 value;
 
-	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
-	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
 		return EP93XX_EXT_CLK_RATE;
 	else
 		return EP93XX_EXT_CLK_RATE / 2;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858..204dc5cbd0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
 
 /* Port ordering is: A B F */
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
 	int port_mask = 1 << (line & 7);
 
 	if (enable)
-		gpio_int_debouce[port] |= port_mask;
+		gpio_int_debounce[port] |= port_mask;
 	else
-		gpio_int_debouce[port] &= ~port_mask;
+		gpio_int_debounce[port] &= ~port_mask;
 
-	__raw_writeb(gpio_int_debouce[port],
+	__raw_writeb(gpio_int_debounce[port],
 		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
 }
 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
 };
 
 
+static struct resource ep93xx_rtc_resource[] = {
+	{
+		.start		= EP93XX_RTC_PHYS_BASE,
+		.end		= EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device ep93xx_rtc_device = {
-       .name           = "ep93xx-rtc",
-       .id             = -1,
-       .num_resources  = 0,
+	.name		= "ep93xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
+	.resource	= ep93xx_rtc_resource,
 };
 
 
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
deleted file mode 100644
index 8bf8d7c78f1..00000000000
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302_flash);
-
-	ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
deleted file mode 100644
index a352c57c7b4..00000000000
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302a_flash);
-
-	ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
deleted file mode 100644
index 5ab22f63a4e..00000000000
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9307_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307_flash);
-
-	ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
deleted file mode 100644
index 6171167d331..00000000000
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9307a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
-	{
-		/* On-board battery backed RTC */
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-	/*
-	 * The I2C signals are also routed to the Expansion Connector (J4)
-	 */
-};
-
-static void __init edb9307a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307a_flash);
-
-	ep93xx_register_eth(&edb9307a_eth_data, 1);
-
-	ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
deleted file mode 100644
index d7179f66d80..00000000000
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * 	Toufeeq Hussain	<toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9312_flash);
-
-	ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9312_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
deleted file mode 100644
index 025af6eaca1..00000000000
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9315_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315_flash);
-
-	ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
deleted file mode 100644
index 4c9cc8a39f5..00000000000
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9315a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315a_flash);
-
-	ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 00000000000..e9e45b92457
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+			resource_size_t start, resource_size_t size)
+{
+	edb93xx_flash_data.width	= width;
+	edb93xx_flash_resource.start	= start;
+	edb93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+	if (machine_is_edb9307() || machine_is_edb9312() ||
+	    machine_is_edb9315()) {
+		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+	} else {
+		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+	}
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+	if (machine_is_edb9302a() || machine_is_edb9307a() ||
+	    machine_is_edb9315a()) {
+		ep93xx_register_i2c(edb93xxa_i2c_data,
+				ARRAY_SIZE(edb93xxa_i2c_data));
+	} else if (machine_is_edb9307() || machine_is_edb9312() ||
+		   machine_is_edb9315()) {
+		ep93xx_register_i2c(edb93xx_i2c_data,
+				ARRAY_SIZE(edb93xx_i2c_data));
+	}
+}
+
+static void __init edb93xx_init_machine(void)
+{
+	ep93xx_init_devices();
+	edb93xx_register_flash();
+	ep93xx_register_eth(&edb93xx_eth_data, 1);
+	edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 1732de7629a..967c079180d 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,13 +147,27 @@
 #define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
 
 #define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
 
 #define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
 #define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 5c80c3c8158..925b12ea099 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -5,6 +5,12 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
 
 #endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194ac6e..00000000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
-	depends on ARCH_IMX
-
-config ARCH_MX1ADS
-	bool "mx1ads"
-	depends on ARCH_IMX
-	select ISA
-	help
-	  Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e795a..00000000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			+= irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX)	+= cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS)	+=  $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5b808..00000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-$(CONFIG_ARCH_MX1ADS)	:= 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332aeb942..00000000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
-	struct list_head node;
-	const char *name;
-	unsigned long (*get_rate)(void);
-};
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-	return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
-	return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
-	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
-	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
-	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
-	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
-	.name = "system_clk",
-	.get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
-	.name = "hclk",
-	.get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
-	.name = "mcu_clk",
-	.get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
-	.name = "perclk1",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
-	.name = "uart_clk",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
-	.name = "perclk2",
-	.get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
-	.name = "perclk3",
-	.get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
-	&clk_perclk1,
-	&clk_perclk2,
-	&clk_perclk3,
-	&clk_system_clk,
-	&clk_hclk,
-	&clk_mcu_clk,
-	&clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (!strcmp(p->name, id)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
-	int i;
-
-	mutex_lock(&clocks_mutex);
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		list_add(&clks[i]->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca0af6..00000000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE	0xC0000000
-#define CR_920T_FASTBUS_MODE	0x00000000
-#define CR_920T_ASYNC_MODE	0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
-	unsigned long flags;
-
-	if (mpctl0 == 0) {
-		local_irq_save(flags);
-		CSCR &= ~CSCR_MPEN;
-		local_irq_restore(flags);
-		return;
-	}
-
-	local_irq_save(flags);
-	MPCTL0 = mpctl0;
-	CSCR |= CSCR_MPEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl:	pointer to location assigned by new PLL control register value
- * @cur_mpctl:	current PLL control register parameters
- * @f_ref:	reference source frequency Hz
- * @freq:	required frequency in Hz
- * @relation:	is one of %CPUFREQ_RELATION_L (supremum)
- *		and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
-        u32 mfi;
-        u32 mfn;
-        u32 mfd;
-        u32 pd;
-	unsigned long long ll;
-	long l;
-	long quot;
-
-	/* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
-	/*  PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
-	if (cur_mpctl) {
-		mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
-		pd =  ((cur_mpctl >> 26) & 0xf) + 1;
-	} else {
-		pd=2; mfd=313;
-	}
-
-	/* pd=2; mfd=313; mfi=8; mfn=183; */
-	/* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
-	quot = (f_ref + (1 << 9)) >> 10;
-	l = (freq * pd + quot) / (2 * quot);
-	mfi = l >> 10;
-	mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
-	mfd -= 1;
-	pd -= 1;
-
-	*new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
-		| ((pd & 0xf) << 26);
-
-	ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-	quot = (pd+1) * (1<<16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	freq = ll;
-
-	pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
-		pd, mfd, mfi, mfn, freq);
-
-	return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
-	unsigned int freq;
-	unsigned int cr;
-	unsigned int cscr;
-	unsigned int bclk_div;
-
-	if (cpu)
-		return 0;
-
-	cscr = CSCR;
-	bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
-	cr = get_cr();
-
-	if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-		freq = clk_get_rate(system_clk);
-		freq = (freq + bclk_div/2) / bclk_div;
-	} else {
-		freq = clk_get_rate(mcu_clk);
-		if (cscr & CSCR_MPU_PRESC)
-			freq /= 2;
-	}
-
-	freq = (freq + 500) / 1000;
-
-	return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	u32 mpctl0 = 0;
-	u32 cscr;
-	unsigned long flags;
-	long freq;
-	long sysclk;
-	unsigned int bclk_div = bclk_div_at_boot;
-
-	/*
-	 * Some governors do not respects CPU and policy lower limits
-	 * which leads to bad things (division by zero etc), ensure
-	 * that such things do not happen.
-	 */
-	if(target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-
-	if(target_freq < policy->min)
-		target_freq = policy->min;
-
-	freq = target_freq * 1000;
-
-	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
-			freq, mpctl0_at_boot);
-
-	sysclk = clk_get_rate(system_clk);
-
-	if (freq > sysclk / bclk_div_at_boot + 1000000) {
-		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
-		if (freq < 0) {
-			printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
-			return -EINVAL;
-		}
-	} else {
-		if(freq + 1000 < sysclk) {
-			if (relation == CPUFREQ_RELATION_L)
-				bclk_div = (sysclk - 1000) / freq;
-			else
-				bclk_div = (sysclk + freq + 1000) / freq;
-
-			if(bclk_div > 16)
-				bclk_div = 16;
-			if(bclk_div < bclk_div_at_boot)
-				bclk_div = bclk_div_at_boot;
-		}
-		freq = (sysclk + bclk_div / 2) / bclk_div;
-	}
-
-	freqs.old = imx_get_speed(0);
-	freqs.new = (freq + 500) / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-
-	imx_set_fastbus_mode();
-
-	imx_set_mpctl0(mpctl0);
-
-	cscr = CSCR;
-	cscr &= ~CSCR_BCLK_DIV;
-	cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
-	CSCR = cscr;
-
-	if(mpctl0) {
-		CSCR |= CSCR_MPLL_RESTART;
-
-		/* Wait until MPLL is stabilized */
-		while( CSCR & CSCR_MPLL_RESTART );
-
-		imx_set_async_mode();
-	}
-
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
-			freq, mpctl0? "MPLL": "SPLL");
-
-	return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = policy->min = policy->max = imx_get_speed(0);
-	policy->cpuinfo.min_freq = 8000;
-	policy->cpuinfo.max_freq = 200000;
-	 /* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
-	return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= imx_verify_speed,
-	.target		= imx_set_target,
-	.get		= imx_get_speed,
-	.init		= imx_cpufreq_driver_init,
-	.name		= "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
-	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
-	mpctl0_at_boot = 0;
-
-	system_clk = clk_get(NULL, "system_clk");
-	if (IS_ERR(system_clk))
-		return PTR_ERR(system_clk);
-
-	mcu_clk = clk_get(NULL, "mcu_clk");
-	if (IS_ERR(mcu_clk)) {
-		clk_put(system_clk);
-		return PTR_ERR(mcu_clk);
-	}
-
-	if((CSCR & CSCR_MPEN) &&
-	   ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
-		mpctl0_at_boot = MPCTL0;
-
-	return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583eece..00000000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/dma.c
- *
- *  imx DMA registration and IRQ dispatching
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- *             initial version heavily inspired by
- *             linux/arch/arm/mach-pxa/dma.c
- *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to support scatter gather DMA
- *             by taking Russell's code from RiscPC
- *
- *  2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned int nextcount;
-	unsigned int nextaddr;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return 0;
-	}
-
-	imxdma->resbytes -= lastcount;
-
-	if (!imxdma->sg) {
-		pr_debug("imxdma%d: no sg data\n", dma_ch);
-		return 0;
-	}
-
-	imxdma->sgbc += lastcount;
-	if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
-		if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
-			pr_debug("imxdma%d: sg transfer limit reached\n",
-				 dma_ch);
-			imxdma->sgcount=0;
-			imxdma->sg = NULL;
-			return 0;
-		} else {
-			imxdma->sgcount--;
-			imxdma->sg++;
-			imxdma->sgbc = 0;
-		}
-	}
-	nextcount = imxdma->sg->length - imxdma->sgbc;
-	nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
-	if(imxdma->resbytes < nextcount)
-		nextcount = imxdma->resbytes;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		DAR(dma_ch) = nextaddr;
-	else
-		SAR(dma_ch) = nextaddr;
-
-	CNTR(dma_ch) = nextcount;
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
-		 dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
-	return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
-		      struct scatterlist *sg, unsigned int sgcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = sg;
-	imxdma->sgcount = sgcount;
-	imxdma->sgbc = 0;
-	return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = dev_addr;
-		DAR(dma_ch) = (unsigned int)dma_address;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = (unsigned int)dma_address;
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	CNTR(dma_ch) = dma_length;
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode)
-{
-	int res;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		SAR(dma_ch) = dev_addr;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
-	if (res <= 0) {
-		printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	DIMR &= ~(1 << dma_ch);
-	CCR(dma_ch) |= CCR_CEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
-	local_irq_save(flags);
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	DISR = (1 << dma_ch);
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (dma_ch >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, dma_ch);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -ENODEV;
-	}
-
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	imxdma->name = NULL;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	for (i = best - 1; i >= 0; i--) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-	struct imx_dma_channel *channel;
-	unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
-	int errcode;
-
-	DISR = disr & err_mask;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if(!(err_mask & (1 << i)))
-			continue;
-		channel = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (DBTOSR & (1 << i)) {
-			DBTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (DRTOSR & (1 << i)) {
-			DRTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (DSESR & (1 << i)) {
-			DSESR = (1 << i);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (DBOSR & (1 << i)) {
-			DBOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-
-		/*
-		 * The cleaning of @sg field would be questionable
-		 * there, because its value can help to compute
-		 * remaining/transferred bytes count in the handler
-		 */
-		/*imx_dma_channels[i].sg = NULL;*/
-
-		if (channel->name && channel->err_handler) {
-			channel->err_handler(i, channel->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, channel->name,
-		       errcode&IMX_DMA_ERR_BURST?    " burst":"",
-		       errcode&IMX_DMA_ERR_REQUEST?  " request":"",
-		       errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
-		       errcode&IMX_DMA_ERR_BUFFER?   " buffer":"");
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	DISR = disr;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i)) {
-			struct imx_dma_channel *channel = &imx_dma_channels[i];
-			if (channel->name) {
-				if (imx_dma_sg_next(i, CNTR(i))) {
-					CCR(i) &= ~CCR_CEN;
-					mb();
-					CCR(i) |= CCR_CEN;
-				} else {
-					if (channel->irq_handler)
-						channel->irq_handler(i,
-							channel->data);
-				}
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
-	int ret;
-	int i;
-
-	/* reset DMA module */
-	DCR = DCR_DRST;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-	}
-
-	/* enable DMA module */
-	DCR = DCR_DEN;
-
-	/* clear all interrupts */
-	DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	/* enable interrupts */
-	DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739ee12..00000000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if(gpio_mode &  GPIO_GIUS)
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		ICONFA1(port) &= ~( 3<<(pin*2));
-		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		ICONFB1(port) &= ~( 3<<(pin*2));
-		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
-		ICONFB2(port) &= ~( 3<<((pin-16)*2));
-		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
-	}
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
-		printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
-			gpio, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
-		printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
-			gpio, label ? label : "?");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32)
-		return;
-
-	clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
-	imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-	imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
-			imx_gpio_free(gpio);
-		else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (imx_gpio_request(gpio, label))
-				if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-					goto setup_error;
-
-		if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    IMX_GPIO_ALLOC_MODE_RELEASE)))
-			imx_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
-		         IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
-
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		imx_gpio_free(gpio);
-	}
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
-	return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIOA(0))
-		return -EINVAL;
-	return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
-	[0] = {
-		.start	= 0x00214000,
-		.end	= 0x002140FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (SDHC_INT),
-		.end	= (SDHC_INT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
-	.name		= "imx-mmc",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &imxmmmc_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imx_mmc_resources),
-	.resource	= imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
-	imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init
-imx_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e4bef..00000000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/generic.h
- *
- * Author:	Sascha Hauer <sascha@saschahauer.de>
- * Copyright:	Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbfe63..00000000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c730f..00000000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679f776..00000000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f8292..00000000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e724c7..00000000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df7f0d..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void *data;
-	unsigned int  dma_mode;
-	struct scatterlist *sg;
-	unsigned int sgbc;
-	unsigned int sgcount;
-	unsigned int resbytes;
-	int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297fc0e3..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART	(1<<22)
-#define CSCR_MPLL_RESTART	(1<<21)
-#define CSCR_SYSTEM_SEL		(1<<16)
-#define CSCR_BCLK_DIV		(0xf<<10)
-#define CSCR_MPU_PRESC		(1<<15)
-#define CSCR_SPEN		(1<<1)
-#define CSCR_MPEN		(1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
-#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
-#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
-#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
-
-#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
-#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
-#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
-#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
-#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
-#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
-#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
-#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
-#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d4802..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5ac1f..00000000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f354dcc..00000000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-	int (*card_present)(struct device *);
-	int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d510eb..00000000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430feec..00000000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67a8f..00000000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95deadc..00000000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/irq.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  03/03/2004   Sascha Hauer <sascha@saschahauer.de>
- *               Copied from the motorola bsp package and added gpio demux
- *               interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF               0x00
-#define NIMASK_OFF                0x04
-#define INTENNUM_OFF              0x08
-#define INTDISNUM_OFF             0x0C
-#define INTENABLEH_OFF            0x10
-#define INTENABLEL_OFF            0x14
-#define INTTYPEH_OFF              0x18
-#define INTTYPEL_OFF              0x1C
-#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
-#define NIVECSR_OFF               0x40
-#define FIVECSR_OFF               0x44
-#define INTSRCH_OFF               0x48
-#define INTSRCL_OFF               0x4C
-#define INTFRCH_OFF               0x50
-#define INTFRCL_OFF               0x54
-#define NIPNDH_OFF                0x58
-#define NIPNDL_OFF                0x5C
-#define FIPNDH_OFF                0x60
-#define FIPNDL_OFF                0x64
-
-#define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...)	printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)	do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int irqt;
-
-	if (irq >= IMX_IRQS)
-		return -EINVAL;
-
-	if (irq < IMX_IRQS / 2) {
-		irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
-	} else {
-		irq -= IMX_IRQS / 2;
-		irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
-	unsigned int irq_type = 0, irq, reg, bit;
-
-	irq = _irq - IRQ_GPIOA(0);
-	reg = irq >> 5;
-	bit = 1 << (irq % 32);
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		   GPIOs set to alternate function during probe */
-		/* TODO: support probe */
-//              if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-//                  GPIO_bit(gpio))
-//                      return 0;
-//              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-//                      return 0;
-//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	GIUS(reg) |= bit;
-	DDIR(reg) &= ~(bit);
-
-	DEBUG_IRQ("setting type of irq %d to ", _irq);
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		DEBUG_IRQ("rising edges\n");
-		irq_type = 0x0;
-	}
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		DEBUG_IRQ("falling edges\n");
-		irq_type = 0x1;
-	}
-	if (type & IRQ_TYPE_LEVEL_LOW) {
-		DEBUG_IRQ("low level\n");
-		irq_type = 0x3;
-	}
-	if (type & IRQ_TYPE_LEVEL_HIGH) {
-		DEBUG_IRQ("high level\n");
-		irq_type = 0x2;
-	}
-
-	if (irq % 32 < 16) {
-		ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	} else {
-		ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	}
-
-	return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	while (mask) {
-		if (mask & 1) {
-			DEBUG_IRQ("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(0);
-	irq = IRQ_GPIOA(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(1);
-	irq = IRQ_GPIOB(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(2);
-	irq = IRQ_GPIOC(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(3);
-	irq = IRQ_GPIOD(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
-	.name = "MPU",
-	.ack = imx_mask_irq,
-	.mask = imx_mask_irq,
-	.unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
-	.name = "GPIO",
-	.ack = imx_gpio_ack_irq,
-	.mask = imx_gpio_mask_irq,
-	.unmask = imx_gpio_unmask_irq,
-	.set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
-	unsigned int irq;
-
-	DEBUG_IRQ("Initializing imx interrupts\n");
-
-	/* Disable all interrupts initially. */
-	/* Do not rely on the bootloader. */
-	__raw_writel(0, IMX_AITC_INTENABLEH);
-	__raw_writel(0, IMX_AITC_INTENABLEL);
-
-	/* Mask all GPIO interrupts as well */
-	IMR(0) = 0;
-	IMR(1) = 0;
-	IMR(2) = 0;
-	IMR(3) = 0;
-
-	for (irq = 0; irq < IMX_IRQS; irq++) {
-		set_irq_chip(irq, &imx_internal_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
-		set_irq_chip(irq, &imx_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
-	/* Release masking of interrupts according to priority */
-	__raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f2762cb..00000000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		DR(0) &= ~(1<<2);
-		break;
-
-	case led_idle_end:
-		DR(0) |= 1<<2;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		DR(0) ^= 1<<2;
-#endif
-	default:
-		break;
-	}
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803e019..00000000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
-	if (machine_is_mx1ads()) {
-		leds_event = mx1ads_leds_event;
-	}
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1da33..00000000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff43b0..00000000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
-	[0] = {
-		.start	= IMX_CS4_PHYS + 0x300,
-		.end	= IMX_CS4_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_GPIOC(17),
-		.end	= IRQ_GPIOC(17),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cs89x0_device = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(cs89x0_resources),
-	.resource	= cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cs89x0_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
-	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
-	return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
-       .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-	/* SD/MMC card detect */
-	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
-	imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
-	imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.boot_params	= 0x08000100,
-	.map_io		= mx1ads_map_io,
-	.init_irq	= imx_init_irq,
-	.timer		= &imx_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b599e..00000000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_imx;
-	uint32_t tstat;
-	irqreturn_t ret = IRQ_NONE;
-
-	/* clear the interrupt */
-	tstat = IMX_TSTAT(TIMER_BASE);
-	IMX_TSTAT(TIMER_BASE) = 0;
-
-	if (tstat & TSTAT_COMP) {
-		evt->event_handler(evt);
-		ret = IRQ_HANDLED;
-	}
-
-	return ret;
-}
-
-static struct irqaction imx_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	IMX_TCTL(TIMER_BASE) = 0;
-	IMX_TPRER(TIMER_BASE) = 0;
-
-	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
-	return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
-	.name 		= "imx_timer1",
-	.rating		= 200,
-	.read		= imx_get_cycles,
-	.mask		= 0xFFFFFFFF,
-	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
-	clocksource_imx.mult =
-		clocksource_hz2mult(rate, clocksource_imx.shift);
-	clocksource_register(&clocksource_imx);
-
-	return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
-				  struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = IMX_TCN(TIMER_BASE) + evt;
-	IMX_TCMP(TIMER_BASE) = tcmp;
-
-	return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call imx_set_next_event()
-	 */
-	local_irq_save(flags);
-	/* Disable interrupt in GPT module */
-	IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
-		/* Clear pending interrupt */
-		IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/*
-		 * Do not put overhead of interrupt enable/disable into
-		 * imx_set_next_event(), the core has about 4 minutes
-		 * to call imx_set_next_event() or shutdown clock after
-		 * mode switching
-		 */
-		local_irq_save(flags);
-		IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appears */
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_imx = {
-	.name		= "imx_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= imx_set_mode,
-	.set_next_event	= imx_set_next_event,
-	.rating		= 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
-	clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
-					clockevent_imx.shift);
-	clockevent_imx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
-	clockevent_imx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_imx);
-
-	clockevent_imx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_imx);
-
-	return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	imx_clocks_init();
-
-	clk = clk_get(NULL, "perclk1");
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	imx_timer_hardware_init();
-	imx_clocksource_init(rate);
-
-	imx_clockevent_init(rate);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
-	.init		= imx_timer_init,
-};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b8520..264f4d59f89 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@ config MACH_IXDP465
 	  IXDP465 Development Platform (Also known as BMP).
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_GORAMO_MLR
+	bool "GORAMO Multi Link Router"
+	help
+	  Say 'Y' here if you want your kernel to support GORAMO
+	  MultiLink router.
+
 config MACH_KIXRP435
 	bool "KIXRP435"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf927a7..47d1f60d23f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 00000000000..a733b8ff3ce
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n)		(IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n)		xgpio_irq(n)
+
+#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
+#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
+#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
+#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
+
+#define IRQ_ETHA		IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB		IRQ_IXP4XX_GPIO5
+#define IRQ_NEC			IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI		IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL		0
+#define GPIO_SDA		1
+#define GPIO_STR		2
+#define GPIO_HSS0_DCD_N		6
+#define GPIO_HSS1_DCD_N		7
+#define GPIO_HSS0_CTS_N		10
+#define GPIO_HSS1_CTS_N		11
+#define GPIO_HSS1_RTS_N		13
+#define GPIO_HSS0_RTS_N		14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT	0
+#define CONTROL_HSS1_CLK_INT	1
+#define CONTROL_HSS0_DTR_N	2
+#define CONTROL_HSS1_DTR_N	3
+#define CONTROL_EXT		4
+#define CONTROL_AUTO_RESET	5
+#define CONTROL_PCI_RESET_N	6
+#define CONTROL_EEPROM_WC_N	7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
+#define CFG_REV			0x4C /* u32 */
+#define CFG_SDRAM_SIZE		0x50 /* u32 */
+#define CFG_SDRAM_CONF		0x54 /* u32 */
+#define CFG_SDRAM_MODE		0x58 /* u32 */
+#define CFG_SDRAM_REFRESH	0x5C /* u32 */
+
+#define CFG_HW_BITS		0x60 /* u32 */
+#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define  CFG_HW_HAS_PCI_SLOT	0x00000008
+#define  CFG_HW_HAS_ETH0	0x00000010
+#define  CFG_HW_HAS_ETH1	0x00000020
+#define  CFG_HW_HAS_HSS0	0x00000040
+#define  CFG_HW_HAS_HSS1	0x00000080
+#define  CFG_HW_HAS_UART0	0x00000100
+#define  CFG_HW_HAS_UART1	0x00000200
+#define  CFG_HW_HAS_EEPROM	0x00000400
+
+#define FLASH_CMD_READ_ARRAY	0xFF
+#define FLASH_CMD_READ_ID	0x90
+#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+	gpio_line_set(GPIO_SCL, !!value);
+	udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+	gpio_line_set(GPIO_SDA, !!value);
+	udelay(3);
+}
+
+static void set_str(u8 value)
+{
+	gpio_line_set(GPIO_STR, !!value);
+	udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+	if (value)
+		control_value |=  (1 << line);
+	else
+		control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+	int i;
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+	for (i = 0; i < 8; i++) {
+		set_scl(0);
+		set_sda(control_value & (0x80 >> i)); /* MSB first */
+		set_scl(1);	/* active edge */
+	}
+
+	set_str(1);
+	set_str(0);
+
+	set_scl(0);
+	set_sda(1);		/* Be ready for START */
+	set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+	switch (clock_type) {
+	case CLOCK_DEFAULT:
+	case CLOCK_EXT:
+		set_control(ctrl_int, 0);
+		output_control();
+		return CLOCK_EXT;
+
+	case CLOCK_INT:
+		set_control(ctrl_int, 1);
+		output_control();
+		return CLOCK_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+	int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb_tab[port](pdev, !i);
+	return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier))
+{
+	int i, irq;
+
+	if (!port)
+		irq = gpio_irq(GPIO_HSS0_DCD_N);
+	else
+		irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb(pdev, !i);
+
+	set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+		       irq, i);
+		return i;
+	}
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+	free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+		 pdev);
+	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= { .platform_data = &flash_data },
+	.num_resources	= 1,
+	.resource	= &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+	.sda_pin	= GPIO_SDA,
+	.scl_pin	= GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device device_uarts = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= uart_data,
+	.num_resources		= 2,
+	.resource		= uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 32,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 33,
+	}
+};
+
+static struct platform_device device_eth_tab[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= eth_plat,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= eth_plat + 1,
+	}
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+	{
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 34,
+	}, {
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 35,
+	}
+};
+
+static struct platform_device device_hss_tab[] = {
+	{
+		.name			= "ixp4xx_hss",
+		.id			= 0,
+		.dev.platform_data	= hss_plat,
+	}, {
+		.name			= "ixp4xx_hss",
+		.id			= 1,
+		.dev.platform_data	= hss_plat + 1,
+	}
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+	&device_flash,		/* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readb(flash + addr);
+#else
+	return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readw(flash + addr);
+#else
+	return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+	u8 __iomem *flash;
+	int i, devices = 1; /* flash */
+
+	ixp4xx_sys_init();
+
+	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+		printk(KERN_ERR "goramo-mlr: unable to access system"
+		       " configuration data\n");
+	else {
+		system_rev = __raw_readl(flash + CFG_REV);
+		hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+		for (i = 0; i < ETH_ALEN; i++) {
+			eth_plat[0].hwaddr[i] =
+				flash_readb(flash, CFG_ETH0_ADDRESS + i);
+			eth_plat[1].hwaddr[i] =
+				flash_readb(flash, CFG_ETH1_ADDRESS + i);
+		}
+
+		__raw_writew(FLASH_CMD_READ_ID, flash);
+		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+		system_serial_high <<= 16;
+		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+		system_serial_low <<= 16;
+		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+		iounmap(flash);
+	}
+
+	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+	case CFG_HW_HAS_UART0:
+		memset(&uart_data[1], 0, sizeof(uart_data[1]));
+		device_uarts.num_resources = 1;
+		break;
+
+	case CFG_HW_HAS_UART1:
+		device_uarts.dev.platform_data = &uart_data[1];
+		device_uarts.resource = &uart_resources[1];
+		device_uarts.num_resources = 1;
+		break;
+	}
+	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+		device_tab[devices++] = &device_uarts; /* max index 1 */
+
+	if (hw_bits & CFG_HW_HAS_ETH0)
+		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+	if (hw_bits & CFG_HW_HAS_ETH1)
+		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+	if (hw_bits & CFG_HW_HAS_HSS0)
+		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+	if (hw_bits & CFG_HW_HAS_HSS1)
+		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+	if (hw_bits & CFG_HW_HAS_EEPROM)
+		device_tab[devices++] = &device_i2c; /* max index 6 */
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+	set_control(CONTROL_HSS0_DTR_N, 1);
+	set_control(CONTROL_HSS1_DTR_N, 1);
+	set_control(CONTROL_EEPROM_WC_N, 1);
+	set_control(CONTROL_PCI_RESET_N, 1);
+	output_control();
+
+	msleep(1);	      /* Wait for PCI devices to initialize */
+
+	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+	set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
+		/* need to adjust number of USB ports on NEC chip */
+		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+			value &= ~7;
+			value |= (hw_bits & CFG_HW_USB_PORTS);
+			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+		}
+	}
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	switch(slot) {
+	case SLOT_ETHA:	return IRQ_ETHA;
+	case SLOT_ETHB:	return IRQ_ETHB;
+	case SLOT_NEC:	return IRQ_NEC;
+	default:	return IRQ_MPCI;
+	}
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= gmlr_pci_preinit,
+	.postinit	= gmlr_pci_postinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+	if (machine_is_goramo_mlr() &&
+	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+		pci_common_init(&gmlr_hw_pci);
+	return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+	/* Maintainer: Krzysztof Halasa */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773be67..b2ef65db0e9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
 #define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
 #define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
 
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+				IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
 			 IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~*IXP4XX_EXP_CFG2;
 
+	if (cpu_is_ixp42x_rev_a0())
+		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+					       IXP4XX_FEATURE_AES);
 	if (cpu_is_ixp42x())
 		return val & IXP42X_FEATURE_MASK;
 	if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ceb67c..9e7cad2d54c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
 #define DEBUG_QMGR	0
 
 #define HALF_QUEUES	32
-#define QUEUES		64	/* only 32 lower queues currently supported */
+#define QUEUES		64
 #define MAX_QUEUE_LENGTH 4	/* in dwords */
 
 #define QUEUE_STAT1_EMPTY		1 /* queue status bits */
@@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue)
 	return val;
 }
 
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
+	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
 }
 
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
 static inline int qmgr_stat_empty(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statne_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
 }
 
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statf_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
 }
 
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
 static inline int qmgr_stat_underflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
 }
 
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
 static inline int qmgr_stat_overflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
 }
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e778e4b..47ac69c7ec7 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe)
 	/* reset the NPE */
 	ixp4xx_write_feature_bits(val &
 				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (!(ixp4xx_read_feature_bits() &
-		      (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-			break;	/* reset completed */
-		udelay(1);
-	}
-	if (i == MAX_RETRIES)
-		return -ETIMEDOUT;
-
 	/* deassert reset */
 	ixp4xx_write_feature_bits(val |
 				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73d0a2..bfdbe4b5a3c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
 
 #if DEBUG_QMGR
 char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32];
 void qmgr_set_irq(unsigned int queue, int src,
 		  void (*handler)(void *pdev), void *pdev)
 {
-	u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-	int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
 	unsigned long flags;
 
-	src &= 7;
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+	if (queue < HALF_QUEUES) {
+		u32 __iomem *reg;
+		int bit;
+		BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+		reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+		bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+		__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+			     reg);
+	} else
+		/* IRQ source for queues 32-63 is fixed */
+		BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
 	irq_handlers[queue] = handler;
 	irq_pdevs[queue] = pdev;
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
 {
-	int i;
-	u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-	__raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
-	for (i = 0; i < HALF_QUEUES; i++)
-		if (val & (1 << i))
+	int i, ret = 0;
+	u32 en_bitmap, src, stat;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+	en_bitmap = qmgr_regs->irqen[0];
+	while (en_bitmap) {
+		i = __fls(en_bitmap); /* number of the last "low" queue */
+		en_bitmap &= ~BIT(i);
+		src = qmgr_regs->irqsrc[i >> 3];
+		stat = qmgr_regs->stat1[i >> 3];
+		if (src & 4) /* the IRQ condition is inverted */
+			stat = ~stat;
+		if (stat & BIT(src & 3)) {
 			irq_handlers[i](irq_pdevs[i]);
+			ret = IRQ_HANDLED;
+		}
+	}
+	return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+	int i, ret = 0;
+	u32 req_bitmap;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+	req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last "high" queue */
+		req_bitmap &= ~BIT(i);
+		irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
 
-	return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+	int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+	u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+	if (!req_bitmap)
+		return 0;
+	__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last queue */
+		req_bitmap &= ~BIT(i);
+		i += half * HALF_QUEUES;
+		irq_handlers[i](irq_pdevs[i]);
+	}
+	return IRQ_HANDLED;
 }
 
 
 void qmgr_enable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-		     &qmgr_regs->irqen[0]);
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+		     &qmgr_regs->irqen[half]);
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 void qmgr_disable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-		     &qmgr_regs->irqen[0]);
-	__raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+		     &qmgr_regs->irqen[half]);
+	__raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
@@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
 	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
 	int err;
 
-	if (queue >= HALF_QUEUES)
-		return -ERANGE;
+	BUG_ON(queue >= QUEUES);
 
 	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
 		return -EINVAL;
@@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue)
 {
 	u32 cfg, addr, mask[4];
 
-	BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+	BUG_ON(queue >= QUEUES); /* not in valid range */
 
 	spin_lock_irq(&qmgr_lock);
 	cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue)
 static int qmgr_init(void)
 {
 	int i, err;
+	irq_handler_t handler1, handler2;
+
 	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
 				     IXP4XX_QMGR_REGION_SIZE,
 				     "IXP4xx Queue Manager");
@@ -247,23 +309,42 @@ static int qmgr_init(void)
 		__raw_writel(0, &qmgr_regs->irqen[i]);
 	}
 
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+	__raw_writel(0, &qmgr_regs->statf_h);
+
 	for (i = 0; i < QUEUES; i++)
 		__raw_writel(0, &qmgr_regs->sram[i]);
 
-	err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-			  "IXP4xx Queue Manager", NULL);
+	if (cpu_is_ixp42x_rev_a0()) {
+		handler1 = qmgr_irq1_a0;
+		handler2 = qmgr_irq2_a0;
+	} else
+		handler1 = handler2 = qmgr_irq;
+
+	err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+			  NULL);
 	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-		       IRQ_IXP4XX_QM1);
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM1, err);
 		goto error_irq;
 	}
 
+	err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+			  NULL);
+	if (err) {
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM2, err);
+		goto error_irq2;
+	}
+
 	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
 	spin_lock_init(&qmgr_lock);
 
 	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
 	return 0;
 
+error_irq2:
+	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
 	iounmap(qmgr_regs);
 error_map:
@@ -274,7 +355,9 @@ error_map:
 static void qmgr_remove(void)
 {
 	free_irq(IRQ_IXP4XX_QM1, NULL);
+	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
+	synchronize_irq(IRQ_IXP4XX_QM2);
 	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b5421cccd7e..25100f7acf4 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
+config MACH_MV88F6281GTW_GE
+	bool "Marvell 88F6281 GTW GE Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell 88F6281 GTW GE Board.
+
 config MACH_SHEEVAPLUG
 	bool "Marvell SheevaPlug Reference Board"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8f03c9b9bdd..9dd680e964d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,5 +3,8 @@ obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 5db4f0bbe5e..1da5d1c18ec 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -20,6 +20,7 @@
  */
 #define TARGET_DDR		0
 #define TARGET_DEV_BUS		1
+#define TARGET_SRAM		3
 #define TARGET_PCIE		4
 #define ATTR_DEV_SPI_ROM	0x1e
 #define ATTR_DEV_BOOT		0x1d
@@ -30,6 +31,7 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_SRAM		0x01
 
 /*
  * Helpers to get DDR bank info
@@ -48,7 +50,6 @@
 
 
 struct mbus_dram_target_info kirkwood_mbus_dram_info;
-static int __initdata win_alloc_count;
 
 static int __init cpu_win_can_remap(int win)
 {
@@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
-	win_alloc_count = 3;
+	/*
+	 * Setup window for SRAM.
+	 */
+	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
 	 * Setup MBUS dram target info.
@@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void)
 	}
 	kirkwood_mbus_dram_info.num_cs = cs;
 }
-
-void __init kirkwood_setup_sram_win(u32 base, u32 size)
-{
-	setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index be1ca28fed3..0f691983801 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/page.h>
@@ -29,6 +30,7 @@
 #include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
 	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
+/*
+ * Default clock control bits.  Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered.  Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+	
 
 /*****************************************************************************
  * EHCI
@@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
 
 void __init kirkwood_ehci_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_USB0;
 	platform_device_register(&kirkwood_ehci);
 }
 
@@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = {
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE0;
 	eth_data->shared = &kirkwood_ge00_shared;
 	kirkwood_ge00.dev.platform_data = eth_data;
 
@@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = {
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE1;
 	eth_data->shared = &kirkwood_ge01_shared;
 	kirkwood_ge01.dev.platform_data = eth_data;
 
@@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 
 /*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+				KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_nand_data,
+	},
+	.resource	= &kirkwood_nand_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+			       int chip_delay)
+{
+	kirkwood_clk_ctrl |= CGC_RUNIT;
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.chip_delay = chip_delay;
+	platform_device_register(&kirkwood_nand_flash);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
@@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = {
 
 void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 {
+	kirkwood_clk_ctrl |= CGC_SATA0;
+	if (sata_data->n_ports > 1)
+		kirkwood_clk_ctrl |= CGC_SATA1;
 	sata_data->dram = &kirkwood_mbus_dram_info;
 	kirkwood_sata.dev.platform_data = sata_data;
 	platform_device_register(&kirkwood_sata);
@@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 	else
 		mvsdio_data->clock = 200000000;
 	mvsdio_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_clk_ctrl |= CGC_SDIO;
 	kirkwood_sdio.dev.platform_data = mvsdio_data;
 	platform_device_register(&kirkwood_sdio);
 }
@@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = {
 
 void __init kirkwood_spi_init()
 {
+	kirkwood_clk_ctrl |= CGC_RUNIT;
 	platform_device_register(&kirkwood_spi);
 }
 
@@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = CRYPTO_PHYS_BASE,
+		.end    = CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = KIRKWOOD_SRAM_PHYS_BASE,
+		.end    = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_KIRKWOOD_CRYPTO,
+		.end    = IRQ_KIRKWOOD_CRYPTO,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(kirkwood_crypto_res),
+	.resource       = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_CRYPTO;
+	platform_device_register(&kirkwood_crypto_device);
+}
+
+
+/*****************************************************************************
  * XOR
  ****************************************************************************/
 static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
@@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
 
 static void __init kirkwood_xor0_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR0;
 	platform_device_register(&kirkwood_xor0_shared);
 
 	/*
@@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
 
 static void __init kirkwood_xor1_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR1;
 	platform_device_register(&kirkwood_xor1_shared);
 
 	/*
@@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void)
 
 
 /*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+	.tclk		= 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_wdt_data,
+	},
+	.num_resources	= 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+	kirkwood_wdt_data.tclk = kirkwood_tclk;
+	platform_device_register(&kirkwood_wdt_device);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 int kirkwood_tclk;
@@ -804,6 +920,49 @@ void __init kirkwood_init(void)
 
 	/* internal devices that every board has */
 	kirkwood_rtc_init();
+	kirkwood_wdt_init();
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
+	kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+	unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+	printk(KERN_DEBUG "Gating clock of unused units\n");
+	printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+	/* Make sure those units are accessible */
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+	/* For SATA: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+	}
+	if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+	}
+	
+	/* For PCIe: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+		writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+		while (1)
+			if (readl(PCIE_STATUS) & 0x1)
+				break;
+		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+	}
+
+	/* Now gate clock the required units */
+	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+	return 0;
 }
+late_initcall(kirkwood_clock_gate);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6ee88406f38..d7de4346435 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -15,6 +15,7 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 struct mvsdio_platform_data;
+struct mtd_partition;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -25,7 +26,6 @@ void kirkwood_init_irq(void);
 
 extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
 void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_sram_win(u32 base, u32 size);
 
 void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
@@ -40,9 +40,11 @@ void kirkwood_spi_init(void);
 void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
new file mode 100644
index 00000000000..f68d33f1f39
--- /dev/null
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES	2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+	.name =         "kirkwood_idle",
+	.owner =        THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		/*
+		 * Following write will put DDR in self refresh.
+		 * Note that we have 256 cycles before DDR puts it
+		 * self in self-refresh, so the wait-for-interrupt
+		 * call afterwards won't get the DDR from self refresh
+		 * mode.
+		 */
+		writel(0x7, DDR_OPERATION_BASE);
+		cpu_do_idle();
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&kirkwood_idle_driver);
+
+	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+	device->state_count = KIRKWOOD_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = kirkwood_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	device->states[1].enter = kirkwood_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "DDR SR");
+	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 5505d583775..39bdf4bcace 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,14 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/orion_nand.h>
 #include <plat/mvsdio.h>
 #include "common.h"
 #include "mpp.h"
@@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource db88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data db88f6281_nand_data = {
-	.parts		= db88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device db88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f6281_nand_data,
-	},
-	.resource	= &db88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
@@ -92,13 +64,12 @@ static void __init db88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(db88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
 	kirkwood_sdio_init(&db88f6281_mvsdio_data);
-	
-	platform_device_register(&db88f6281_nand_flash);
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 4f7029f521c..9e80d9232c8 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -17,12 +17,15 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define WDT_INT_REQ		0x0008
+
 #define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
 #define BRIDGE_INT_TIMER0	0x0002
 #define BRIDGE_INT_TIMER1	0x0004
@@ -39,4 +42,22 @@
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_GE0			(1 << 0)
+#define CGC_PEX0		(1 << 2)
+#define CGC_USB0		(1 << 3)
+#define CGC_SDIO		(1 << 4)
+#define CGC_TSU			(1 << 5)
+#define CGC_DUNIT		(1 << 6)
+#define CGC_RUNIT		(1 << 7)
+#define CGC_XOR0		(1 << 8)
+#define CGC_AUDIO		(1 << 9)
+#define CGC_SATA0		(1 << 14)
+#define CGC_SATA1		(1 << 15)
+#define CGC_XOR1		(1 << 16)
+#define CGC_CRYPTO		(1 << 17)
+#define CGC_GE1			(1 << 19)
+#define CGC_TDM			(1 << 20)
+#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index be07be0ef52..a643a846d5f 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
+	    size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
+		retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
 #define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index b3e13958821..07af858814a 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -20,16 +20,18 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f3000000	NAND controller address window
+ * f4000000	Security Accelerator SRAM
  *
  * virt		phys		size
  * fee00000	f1000000	1M	on-chip peripheral registers
  * fef00000	f2000000	1M	PCIe I/O space
  */
 
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_SIZE		SZ_2K
+
 #define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
 #define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
@@ -48,6 +50,7 @@
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
 
 #define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@@ -63,7 +66,11 @@
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
 
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -80,6 +87,11 @@
 #define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 63c44934391..a5900f64e38 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	if (!variant_mask)
 		return;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	printk(KERN_DEBUG "initial MPP regs:");
 	for (i = 0; i < MPP_NR_REGS; i++) {
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644
index 00000000000..0358f45766c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+	.type		= "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 47,
+		.desc		= "SWR Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_F1,
+		.gpio		= 46,
+		.desc		= "WPS Button(F1)",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+	.buttons	= mv88f6281gtw_ge_button_pins,
+	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv88f6281gtw_ge_button_data,
+	},
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+	{
+		.name		= "gtw:green:Status",
+		.gpio		= 20,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:red:Status",
+		.gpio		= 21,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:green:USB",
+		.gpio		= 12,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+	.leds		= mv88f6281gtw_ge_led_pins,
+	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv88f6281gtw_ge_led_data,
+	},
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+	MPP12_GPO,	/* Status#_USB pin  */
+	MPP20_GPIO,	/* Status#_GLED pin */
+	MPP21_GPIO,	/* Status#_RLED pin */
+	MPP46_GPIO,	/* WPS_Switch pin   */
+	MPP47_GPIO,	/* SW_Init pin      */
+	0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+	platform_device_register(&mv88f6281gtw_ge_leds);
+	platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+	if (machine_is_mv88f6281gtw_ge())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= mv88f6281gtw_ge_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 73fccacd1a7..d90b9aae308 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -14,6 +14,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 
 
@@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = {
 static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
+	extern unsigned int kirkwood_clk_ctrl;
 
 	/*
 	 * Generic PCIe unit setup.
@@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
+	kirkwood_clk_ctrl |= CGC_PEX0;
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 2f0e4ef3db0..8bf4153d084 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,8 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/flash.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31e996d65fc..31708ddbc83 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
@@ -22,7 +21,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource rd88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data rd88f6281_nand_data = {
-	.parts		= rd88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(rd88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device rd88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &rd88f6281_nand_data,
-	},
-	.resource	= &rd88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
@@ -114,6 +86,7 @@ static void __init rd88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
@@ -129,8 +102,6 @@ static void __init rd88f6281_init(void)
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
-
-	platform_device_register(&rd88f6281_nand_flash);
 }
 
 static int __init rd88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 831e4a56cae..c7319eeac8b 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -20,7 +19,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = {
 	},
 };
 
-static struct resource sheevaplug_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data sheevaplug_nand_data = {
-	.parts		= sheevaplug_nand_parts,
-	.nr_parts	= ARRAY_SIZE(sheevaplug_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device sheevaplug_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sheevaplug_nand_data,
-	},
-	.resource	= &sheevaplug_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	// unfortunately the CD signal has not been connected */
+	/* unfortunately the CD signal has not been connected */
 };
 
 static struct gpio_led sheevaplug_led_pins[] = {
@@ -111,6 +83,7 @@ static void __init sheevaplug_init(void)
 	kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
@@ -120,7 +93,6 @@ static void __init sheevaplug_init(void)
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
 	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
-	platform_device_register(&sheevaplug_nand_flash);
 	platform_device_register(&sheevaplug_leds);
 }
 
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index e83e45ebf7a..16295cfd5e2 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -52,6 +52,7 @@
 /*
  * Interrupt numbers for PXA910
  */
+#define IRQ_PXA910_NONE			(-1)
 #define IRQ_PXA910_AIRQ			0
 #define IRQ_PXA910_SSP3			1
 #define IRQ_PXA910_SSP2			2
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 2e914649b9e..3b216bf41e7 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -253,6 +253,10 @@
 #define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
 #define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
 
+/* I2C */
+#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
+#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
+
 /* I2S */
 #define GPIO113_I2S_MCLK	MFP_CFG(GPIO113,AF6)
 #define GPIO114_I2S_FRM		MFP_CFG(GPIO114,AF1)
@@ -260,4 +264,27 @@
 #define GPIO116_I2S_RXD		MFP_CFG(GPIO116,AF2)
 #define GPIO117_I2S_TXD		MFP_CFG(GPIO117,AF2)
 
+/* PWM */
+#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
+#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
+#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
+#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
+#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
+#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
+#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
+#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
+#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
+#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
+#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
+#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
+#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
+#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
+#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
+#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
+#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
+#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
+#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
+#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
+#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index d97de36c50a..bf1189ff9a3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -159,4 +159,12 @@
 #define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
+/* PWM */
+#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
+#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
+#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
+#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
+#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
+
 #endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index ef0a8a2076e..6bf1f0eefcd 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_twsi0;
+extern struct pxa_device_desc pxa168_device_twsi1;
+extern struct pxa_device_desc pxa168_device_pwm1;
+extern struct pxa_device_desc pxa168_device_pwm2;
+extern struct pxa_device_desc pxa168_device_pwm3;
+extern struct pxa_device_desc pxa168_device_pwm4;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa168_device_twsi0; break;
+	case 1: d = &pxa168_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa168_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_pwm1; break;
+	case 2: d = &pxa168_device_pwm2; break;
+	case 3: d = &pxa168_device_pwm3; break;
+	case 4: d = &pxa168_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b7aeaf574c3..6ae1ed7a0a9 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
+extern struct pxa_device_desc pxa910_device_twsi0;
+extern struct pxa_device_desc pxa910_device_twsi1;
+extern struct pxa_device_desc pxa910_device_pwm1;
+extern struct pxa_device_desc pxa910_device_pwm2;
+extern struct pxa_device_desc pxa910_device_pwm3;
+extern struct pxa_device_desc pxa910_device_pwm4;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa910_device_twsi0; break;
+	case 1: d = &pxa910_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa910_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa910_device_pwm1; break;
+	case 2: d = &pxa910_device_pwm2; break;
+	case 3: d = &pxa910_device_pwm3; break;
+	case 4: d = &pxa910_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index c6b8c9dc202..98ccbee4bd0 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -22,8 +22,10 @@
 #define APBC_PXA168_UART1	APBC_REG(0x000)
 #define APBC_PXA168_UART2	APBC_REG(0x004)
 #define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM0	APBC_REG(0x00c)
-#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_PWM1	APBC_REG(0x00c)
+#define APBC_PXA168_PWM2	APBC_REG(0x010)
+#define APBC_PXA168_PWM3	APBC_REG(0x014)
+#define APBC_PXA168_PWM4	APBC_REG(0x018)
 #define APBC_PXA168_SSP1	APBC_REG(0x01c)
 #define APBC_PXA168_SSP2	APBC_REG(0x020)
 #define APBC_PXA168_RTC		APBC_REG(0x028)
@@ -48,10 +50,10 @@
 #define APBC_PXA910_UART0	APBC_REG(0x000)
 #define APBC_PXA910_UART1	APBC_REG(0x004)
 #define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM0	APBC_REG(0x00c)
-#define APBC_PXA910_PWM1	APBC_REG(0x010)
-#define APBC_PXA910_PWM2	APBC_REG(0x014)
-#define APBC_PXA910_PWM3	APBC_REG(0x018)
+#define APBC_PXA910_PWM1	APBC_REG(0x00c)
+#define APBC_PXA910_PWM2	APBC_REG(0x010)
+#define APBC_PXA910_PWM3	APBC_REG(0x014)
+#define APBC_PXA910_PWM4	APBC_REG(0x018)
 #define APBC_PXA910_SSP1	APBC_REG(0x01c)
 #define APBC_PXA910_SSP2	APBC_REG(0x020)
 #define APBC_PXA910_IPC		APBC_REG(0x024)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ae924468658..71b1ae33875 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,11 +65,23 @@ void __init pxa168_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
 static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = {
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 453f8f7758b..5882ca6b49f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -103,11 +103,23 @@ void __init pxa910_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
 static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = {
  */
 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
+PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index f289b0ea7dc..22b4ff893b3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void)
 {
 	int i;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f300ff..7622c9b38c9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/common.h>
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = {
 	}
 };
 
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX1);
+
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057fb855..e5b0c0a83c3 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
 #include <mach/i2c.h>
+#include <mach/imx-uart.h>
 #include <mach/iomux.h>
+#include <mach/irqs.h>
+
 #include "devices.h"
 
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+	/* UART1 */
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
 	PC11_PF_UART1_TXD,
 	PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
+	/* UART2 */
 	PB28_PF_UART2_CTS,
 	PB29_PF_UART2_RTS,
 	PB30_PF_UART2_TXD,
 	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+	/* SPI */
+	PC13_PF_SPI1_SPI_RDY,
+	PC14_PF_SPI1_SCLK,
+	PC15_PF_SPI1_SS,
+	PC16_PF_SPI1_MISO,
+	PC17_PF_SPI1_MOSI,
 };
 
-static int uart2_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
+/*
+ * UARTs platform data
+ */
 
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart1_mxc_init,
-		.exit = uart1_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart2_mxc_init,
-		.exit = uart2_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
@@ -111,24 +90,6 @@ static struct platform_device flash_device = {
 /*
  * I2C
  */
-
-static int i2c_pins[] = {
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins));
-}
-
 static struct pcf857x_platform_data pcf857x_data[] = {
 	{
 		.gpio_base = 4 * 32,
@@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 
 static struct imxi2c_platform_data mx1ads_i2c_data = {
 	.bitrate = 100000,
-	.init = i2c_init,
-	.exit = i2c_exit,
 };
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+	mxc_gpio_setup_multiple_pins(mx1ads_pins,
+		ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
 	/* UART */
 	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
 	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
@@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3fa28b..20e0b5bcdff 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.phys_io	= 0x00200000,
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a788842f4..c77da586b71 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@ endchoice
 
 comment "MX2 platforms:"
 
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	depends on MACH_MX21
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_MX27ADS
 	bool "MX27ADS platform"
 	depends on MACH_MX27
@@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a9154..b9b1cca4e9b 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
 obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e4b08ca804e..0850fb88ec1 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+			unsigned long rate,
+			u32 max_divisor)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > max_divisor)
+		div = max_divisor;
+
+	return parent_rate / div;
+}
+
 static int _clk_spll_enable(struct clk *clk)
 {
 	u32 reg;
@@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk)
 static unsigned long _clk_perclkx_round_rate(struct clk *clk,
 					     unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 64);
 }
 
 static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
@@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk)
 	return parent_rate / (usb_pdf + 1U);
 }
 
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = CSCR() & ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
 static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
 {
 	unsigned long parent_rate;
@@ -595,11 +628,14 @@ static struct clk csi_clk[] = {
 static struct clk usb_clk[] = {
 	{
 		.parent = &spll_clk,
+		.secondary = &usb_clk[1],
 		.get_rate = _clk_usb_recalc,
 		.enable = _clk_enable,
 		.enable_reg = CCM_PCCR_USBOTG_REG,
 		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
 		.disable = _clk_disable,
+		.round_rate = _clk_usb_round_rate,
+		.set_rate = _clk_usb_set_rate,
 	}, {
 		.parent = &hclk_clk,
 		.enable = _clk_enable,
@@ -768,18 +804,7 @@ static struct clk rtc_clk = {
 
 static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		div = 8;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 8);
 }
 
 static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
@@ -921,7 +946,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd04948..169372f69d8 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX21);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+void __init mx27_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 00000000000..a5ee461cb40
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+	/* CS8900A */
+	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+
+	/* UART3 (IrDA) - only TXD and RXD */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+
+	/* LCDC */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA24_PF_REV,     /* Sharp panel dedicated signal */
+	PA25_PF_CLS,     /* Sharp panel dedicated signal */
+	PA26_PF_PS,      /* Sharp panel dedicated signal */
+	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+
+	/* MMC/SDHC */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+
+	/* NFC */
+	PF0_PF_NRFB,
+	PF1_PF_NFCE,
+	PF2_PF_NFWP,
+	PF3_PF_NFCLE,
+	PF4_PF_NFALE,
+	PF5_PF_NFRE,
+	PF6_PF_NFWE,
+	PF7_PF_NFIO0,
+	PF8_PF_NFIO1,
+	PF9_PF_NFIO2,
+	PF10_PF_NFIO3,
+	PF11_PF_NFIO4,
+	PF12_PF_NFIO5,
+	PF13_PF_NFIO6,
+	PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+	.width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+	.start = CS0_BASE_ADDR,
+	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx21ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp |= MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+	return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp &= ~MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.pixclock       = 188679, /* in ps */
+	.xres           = 240,
+	.yres           = 320,
+
+	.bpp            = 16,
+	.hsync_len      = 2,
+	.left_margin    = 6,
+	.right_margin   = 16,
+
+	.vsync_len      = 1,
+	.upper_margin   = 8,
+	.lower_margin   = 10,
+	.fixed_screen_cpu = 0,
+
+	.pcr            = 0xFB108BC7,
+	.pwmr           = 0x00A901ff,
+	.lscr1          = 0x00120300,
+	.dmacr          = 0x00020008,
+
+	.init = mx21ads_fb_init,
+	.exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+	void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+	.get_ro = mx21ads_sdhc_get_ro,
+	.init = mx21ads_sdhc_init,
+	.exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+	/*
+	 * Memory-mapped I/O on MX21ADS Base board:
+	 *   - CS8900A Ethernet controller
+	 *   - ST16C2552CJ UART
+	 *   - CPU and Base board version
+	 *   - Base board I/O register
+	 */
+	{
+		.virtual = MX21ADS_MMIO_BASE_ADDR,
+		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.length = MX21ADS_MMIO_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx21ads_map_io(void)
+{
+	mx21_map_io();
+	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+			"mx21ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+	mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+	.init	= mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx21ads_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx21ads_board_init,
+	.timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097adc1..02daddac699 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,9 +35,117 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
 	.width = 2,
@@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = {
 	.resource = &mx27ads_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+	.bitrate = 100000,
 };
 
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
 };
 
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.pixclock	= 188679,
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 9,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFB008BC0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
 };
 
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
 }
 
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
 }
 
-static int mxc_uart3_pins[] = {
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins), "UART3");
+	free_irq(IRQ_GPIOE(21), data);
 }
 
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins));
-	return 0;
+	free_irq(IRQ_GPIOB(7), data);
 }
 
-static int mxc_uart4_pins[] = {
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
 };
 
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins));
-	return 0;
-}
-
-static int mxc_uart5_pins[] = {
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
 };
 
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins));
-	return 0;
-}
-
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
 	&mxc_fec_device,
+	&mxc_w1_master_device,
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port3_init,
-		.exit = uart_mxc_port3_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port4_init,
-		.exit = uart_mxc_port4_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port5_init,
-		.exit = uart_mxc_port5_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
 static void __init mx27ads_board_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 
 static void __init mx27ads_map_io(void)
 {
-	mxc_map_io();
+	mx27_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
new file mode 100644
index 00000000000..3ae11cb8c04
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 00000000000..1d9238c7a6c
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa61d1b..a4628d00434 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
 #include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
 #include <mach/mxc_nand.h>
 
 #include "devices.h"
 
+static int pcm038_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD27_PF_CSPI1_SS1,
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
+};
+
 /*
  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  * 16 bit width
@@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = {
 	.resource = &pcm038_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
-				PE9_PF_UART3_RXD,
-				PE10_PF_UART3_CTS,
-				PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
@@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void)
 	__raw_writel(0x22220a00, CSCR_A(1));
 }
 
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
-			"I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm038_i2c_1_init,
-	.exit = pcm038_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 		.type = "lm75"
 	}
 };
-#endif
 
 static void __init pcm038_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+			"PCM038");
+
 	pcm038_init_sram();
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@ static void __init pcm038_init(void)
 	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
-#ifdef CONFIG_I2C_IMX
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
@@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.phys_io        = AIPI_BASE_ADDR,
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx27_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520bc1b..6a3acaf57dd 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
 #include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+	/* SDHC */
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
 	PB6_PF_SD2_D2,
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/*
+	 * it seems the data line misses a pullup, so we must enable
+	 * the internal pullup as a local workaround
+	 */
+	PD17_PF_I2C_DATA | GPIO_PUEN,
+	PD18_PF_I2C_CLK,
+	/* Camera */
+	PB10_PF_CSI_D0,
+	PB11_PF_CSI_D1,
+	PB12_PF_CSI_D2,
+	PB13_PF_CSI_D3,
+	PB14_PF_CSI_D4,
+	PB15_PF_CSI_MCLK,
+	PB16_PF_CSI_PIXCLK,
+	PB17_PF_CSI_D5,
+	PB18_PF_CSI_D6,
+	PB19_PF_CSI_D7,
+	PB20_PF_CSI_VSYNC,
+	PB21_PF_CSI_HSYNC,
 };
 
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
 static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
 {
 	int ret;
 
-	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
-		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
-	if(ret)
-		return ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
 				"imx-mmc-detect", data);
 	if (ret)
-		goto out_release_gpio;
-
-	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+		return ret;
 
 	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret)
-		goto out_release_gpio;
+	if (ret) {
+		free_irq(IRQ_GPIOC(29), data);
+		return ret;
+	}
 
-	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
 	gpio_direction_input(GPIO_PORTC + 28);
 
 	return 0;
-
-out_release_gpio:
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
-	return ret;
 }
 
 static void pcm970_sdhc2_exit(struct device *dev, void *data)
 {
 	free_irq(IRQ_GPIOC(29), data);
 	gpio_free(GPIO_PORTC + 28);
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
 }
 
 static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-static int mxc_fb_pins[] = {
-	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
-	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
-	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
-	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
-	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
-	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
-	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
-			ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
-	return 0;
-}
-
 /*
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DH06
@@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
-
-	.init = pcm038_fb_init,
-	.exit = pcm038_fb_exit,
 };
 
 /*
@@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = {
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+			"PCM970");
+
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b8428bba..17a21a291e2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
 if ARCH_MX3
 
 config ARCH_MX31
+	select ARCH_HAS_RNGA
 	bool
 
 config ARCH_MX35
 	bool
+	select ARCH_MXC_IOMUX_V3
 
 comment "MX3 platforms:"
 
@@ -37,7 +39,6 @@ config MACH_PCM037
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -45,7 +46,6 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -53,17 +53,43 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select ARCH_MX31
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select ARCH_MX35
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select ARCH_MX31
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select ARCH_MX35
+	default n
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a953b3..0322696bd11 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,9 +8,13 @@ obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
 obj-$(CONFIG_MACH_QONG)		+= qong.o
+obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
new file mode 100644
index 00000000000..541181090b3
--- /dev/null
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -0,0 +1,295 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	/* LAN9118_IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 640x480 @ 60 Hz */
+		.name		= "CRT-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 35,
+		.right_margin	= 115,
+		.upper_margin	= 43,
+		.lower_margin	= 1,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {/* 800x600 @ 56 Hz */
+		.name		= "CRT-SVGA",
+		.refresh	= 56,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 30000,
+		.left_margin	= 30,
+		.right_margin	= 108,
+		.upper_margin	= 13,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+				   irq_handler_t detect_irq, void *data)
+{
+	int ret;
+	int gpio_det, gpio_wp;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+	ret = gpio_request(gpio_det, "sdhc-card-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(gpio_det);
+
+	ret = gpio_request(gpio_wp, "sdhc-write-protect");
+	if (ret)
+		goto err_gpio_free;
+
+	gpio_direction_input(gpio_wp);
+
+	/* When supported the trigger type have to be BOTH */
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "sdhc-detect", data);
+
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(gpio_wp);
+
+err_gpio_free:
+	gpio_free(gpio_det);
+
+	return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = armadillo5x0_sdhc1_get_ro,
+	.init = armadillo5x0_sdhc1_init,
+	.exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+	{
+		.start	= CS3_BASE_ADDR,
+		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+	.resource       = armadillo5x0_smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* Register UART */
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+	/* Register FB */
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+	.init	= armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+	/* Maintainer: Alberto Panizzo  */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &armadillo5x0_timer,
+	.init_machine	= armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 3c1e06f56dd..577ee83d1f6 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = {
 	{ .arm = 0, .ahb = 0, .sel = 0},
 };
 
-static struct arm_ahb_div clk_automotive[] = {
-	{ .arm = 1, .ahb = 3, .sel = 0},
-	{ .arm = 1, .ahb = 2, .sel = 1},
-	{ .arm = 2, .ahb = 1, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 0},
-	{ .arm = 1, .ahb = 4, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
 static unsigned long get_rate_arm(void)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1) {
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-		if (aad->sel)
-			fref = fref * 2 / 3;
-	} else {
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
-		if (aad->sel)
-			fref = fref * 3 / 4;
-	}
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	if (aad->sel)
+		fref = fref * 2 / 3;
+
 	return fref / aad->arm;
 }
 
@@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1)
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	else
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
 	return fref / aad->ahb;
 }
@@ -430,7 +407,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
 	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
 	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
 	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-	mxc_set_cpu_type(MXC_CPU_MX35);
-
 #ifdef CONFIG_DEBUG_LL_CONSOLE
 	ll = (3 << 16);
 #endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index a68fcf981ed..8b14239724c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
 DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
@@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref)
 	u32 reg;
 	int i;
 
-	mxc_set_cpu_type(MXC_CPU_MX31);
-
 	ckih_rate = fref;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* change the csi_clk parent if necessary */
+	reg = __raw_readl(MXC_CCM_CCMR);
+	if (!(reg & MXC_CCM_CCMR_CSCS))
+		if (clk_set_parent(&csi_clk, &usb_pll_clk))
+			pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
 	/* Turn off all possible clocks */
 	__raw_writel((3 << 4), MXC_CCM_CGR0);
 	__raw_writel(0, MXC_CCM_CGR1);
@@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref)
 					   MX32, but still required to be set */
 		     MXC_CCM_CGR2);
 
+	/*
+	 * Before turning off usb_pll make sure ipg_per_clk is generated
+	 * by ipg_clk and not usb_pll.
+	 */
+	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
 	usb_pll_disable(&usb_pll_clk);
 
 	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c9b21..d927eddcad4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
  * Boston, MA  02110-1301, USA.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/common.h>
 #include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
 
 #include "devices.h"
 
@@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = {
 	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
 	.resource = mxcsdhc1_resources,
 };
+
+static struct resource rnga_resources[] = {
+	{
+		.start = RNGA_BASE_ADDR,
+		.end = RNGA_BASE_ADDR + 0x28,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_rnga_device = {
+	.name = "mxc_rnga",
+	.id = -1,
+	.num_resources = 1,
+	.resource = rnga_resources,
+};
 #endif /* CONFIG_ARCH_MX31 */
 
 /* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@ struct platform_device mx3_fb = {
 	.num_resources	= ARRAY_SIZE(fb_resources),
 	.resource	= fb_resources,
 	.dev		= {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
        },
 };
 
+static struct resource camera_resources[] = {
+	{
+		.start	= IPU_CTRL_BASE_ADDR + 0x60,
+		.end	= IPU_CTRL_BASE_ADDR + 0x87,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mx3_camera = {
+	.name		= "mx3-camera",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(camera_resources),
+	.resource	= camera_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
@@ -359,6 +422,7 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b296fa..ffd494ddd4a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a664d..c66ccbcdc11 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
- * setups a single pin:
+ * allocs a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad >= (PIN_MAX + 1)) {
 		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
 	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
 		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
 			pad, label ? label : "?");
-		return -EINVAL;
+		return -EBUSY;
 	}
 	mxc_iomux_mode(pin);
 
-	/* if we have a gpio, we can allocate it */
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		if (gpio_request(gpio, label))
-			return -EINVAL;
-
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 		const char *label)
@@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 	int ret = -EINVAL;
 
 	for (i = 0; i < count; i++) {
-		if (mxc_iomux_setup_pin(*p, label))
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
 			goto setup_error;
 		p++;
 	}
@@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 void mxc_iomux_release_pin(const unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad < (PIN_MAX + 1))
 		clear_bit(pad, mxc_pin_alloc_map);
-
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		gpio_free(gpio);
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459cb4b7..1f5fdd456cb 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX31);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efefa6a..30e2767a78a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void)
 	/*
 	 * Configure INT line as GPIO input
 	 */
-	mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
 	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
  */
 static void __init mx31ads_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
new file mode 100644
index 00000000000..3b3a78f49c2
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ *  LILLY-1131 development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	= mxc_mmc1_get_ro,
+	.init	= mxc_mmc1_init,
+	.exit	= mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+	/* 640x480 TFT panel (IPS-056T) */
+	.name	   	= "CRT-VGA",
+	.refresh	= 64,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 30000,
+	.left_margin	= 200,
+	.right_margin	= 2,
+	.upper_margin	= 2,
+	.lower_margin	= 2,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+	.vmode		= FB_VMODE_NONINTERLACED,
+	.flag		= 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= &fb_modedb,
+	.num_modes	= 1,
+};
+
+#define LCD_VCC_EN_GPIO	 (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+		return;
+	}
+
+	mxc_register_device(&mx3_ipu, &ipu_data);
+	mxc_register_device(&mx3_fb, &fb_pdata);
+	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+					ARRAY_SIZE(lilly_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mx31lilly_init_fb();
+}
+
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
new file mode 100644
index 00000000000..6ab2f163cb9
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -0,0 +1,155 @@
+/*
+ *  LILLY-1131 module support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+	{
+		.start	= CS4_BASE_ADDR,
+		.end	= CS4_BASE_ADDR + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT |
+			  SMSC911X_SAVE_MAC_ADDRESS |
+			  SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc91x_resources),
+	.resource	= smsc91x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	}
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+	&mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+	switch (mx31lilly_baseboard) {
+	case MX31LILLY_NOBOARD:
+		break;
+	case MX31LILLY_DB:
+		mx31lilly_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+			mx31lilly_baseboard);
+	}
+
+	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+	.init	= mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.init_machine	= mx31lilly_board_init,
+	.timer		= &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98cd994..86fe70fa3e1 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,11 +35,64 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
 
 /*
  * This file contains the board-specific initialization routines.
  */
 
+static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* LAN9117 IRQ pin */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= CS4_BASE_ADDR,
+		.end		= CS4_BASE_ADDR + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
  */
 void __init mx31lite_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
@@ -68,6 +124,22 @@ void __init mx31lite_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+				      "mx31lite");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+	/* SMSC9117 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+		platform_device_register(&smsc911x_device);
+	}
 }
 
 static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4add79..4704405165a 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int devboard_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int mxc_uart1_pins[] = {
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= devboard_sdhc2_get_ro,
+	.init	= devboard_sdhc2_init,
+	.exit	= devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_devboard_init(void)
 {
 	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+		"devboard");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566823f..641c3d6153a 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int marxbot_pins[] = {
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	MX31_PIN_TXD2__GPIO1_28,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= marxbot_sdhc2_get_ro,
+	.init	= marxbot_sdhc2_init,
+	.exit	= marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_marxbot_init(void)
 {
 	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+		"marxbot");
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	marxbot_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b99d4..a17f2e41160 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int moboard_pins[] = {
+	/* UART0 */
+	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	/* UART4 */
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+	/* I2C0 */
+	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+	/* I2C1 */
+	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
 static struct physmap_flash_data mx31moboard_flash_data = {
 	.width  	= 2,
 };
@@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+	.bitrate = 400000,
 };
 
-static int mxc_uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+	.bitrate = 100000,
 };
-static int mxc_uart4_pins[] = {
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_CD);
+
+	ret = gpio_request(SDHC1_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc1-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC1_WP);
+err_gpio_free:
+	gpio_free(SDHC1_CD);
+
+	return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC1_CD), data);
+	gpio_free(SDHC1_WP);
+	gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.get_ro	= moboard_sdhc1_get_ro,
+	.init	= moboard_sdhc1_init,
+	.exit	= moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
 };
 
 static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mxc_board_init(void)
 {
+	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+		"moboard");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -99,7 +177,8 @@ static void __init mxc_board_init(void)
 		mx31moboard_marxbot_init();
 		break;
 	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+			mx31moboard_baseboard);
 	}
 }
 
@@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f178569..c19838d2e36 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,9 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,21 +44,192 @@
  * @ingroup System
  */
 
+static int mx31pdk_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= LAN9217_BASE_ADDR,
+		.end		= LAN9217_BASE_ADDR + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= EXPIO_INT_ENET,
+		.end		= EXPIO_INT_ENET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
 };
 
-static inline void mxc_init_imx_uart(void)
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
 {
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	uint32_t imr_val;
+	uint32_t int_valid;
+	uint32_t expio_irq;
+
+	imr_val = __raw_readw(CPLD_INT_MASK_REG);
+	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* mask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg |= 1 << expio;
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	/* mask the interrupt */
+	expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* unmask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+	int i;
+	int ret;
+
+	/* Check if there's a debug board connected */
+	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		/* No Debug board found */
+		return -ENODEV;
+	}
+
+	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+		__raw_readw(CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/* Disable the interrupts and clear the status */
+	__raw_writew(0, CPLD_INT_MASK_REG);
+	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	__raw_writew(0x1F, CPLD_INT_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+	return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+	{
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED,
+	}, {
+		.virtual = CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
+		.length = CS5_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
 }
 
 /*!
@@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void)
  */
 static void __init mxc_board_init(void)
 {
-	mxc_init_imx_uart();
+	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+				      "mx31pdk");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	if (!mx31pdk_init_expio())
+		platform_device_register(&smsc911x_device);
 }
 
 static void __init mx31pdk_timer_init(void)
@@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31pdk_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
new file mode 100644
index 00000000000..6d15374414b
--- /dev/null
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d837b2..c6f61a1f06c 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,7 +41,9 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
 
 #include "devices.h"
 
+static unsigned int pcm037_pins[] = {
+	/* I2C */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+	/* SPI1 */
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	/* UART3 */
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	/* LAN9217 irq pin */
+	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+	/* Onewire */
+	MX31_PIN_BATT_LINE__OWIRE,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_D3_REV__D3_REV,
+	MX31_PIN_CONTRAST__CONTRAST,
+	MX31_PIN_D3_SPL__D3_SPL,
+	MX31_PIN_D3_CLS__D3_CLS,
+	MX31_PIN_LCS0__GPI03_23,
+};
+
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
 };
@@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
+static int usbotg_pins[] = {
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+					ARRAY_SIZE(usbotg_pins), "usbotg");
+
+	if (ret < 0) {
+		printk(KERN_ERR "Cannot set up OTG pins\n");
+		return ret;
+	}
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device pcm037_flash = {
 	.name	= "physmap-flash",
 	.id	= 0,
@@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 };
 
 #ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
-	return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
-			"i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
-	mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm037_i2c_1_init,
-	.exit = pcm037_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 };
 #endif
 
-static int sdhc1_pins[] = {
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
 {
-	return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
-				"sdhc-1");
+	int ret;
+
+	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+				"sdhc-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+	gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+	gpio_free(SDHC1_GPIO_DET);
+
+	return ret;
 }
 
 static void pcm970_sdhc1_exit(struct device *dev, void *data)
 {
-	mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+	gpio_free(SDHC1_GPIO_DET);
+	gpio_free(SDHC1_GPIO_WP);
 }
 
-/* No card and rw detection at the moment */
 static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+	.get_ro = pcm970_sdhc1_get_ro,
+#endif
 	.init = pcm970_sdhc1_init,
 	.exit = pcm970_sdhc1_exit,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
-	&pcm037_eth,
 	&pcm037_sram_device,
 };
 
-static int uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static int uart2_pins[] = {
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz Sharp */
+		.name		= "Sharp-LQ035Q7DH06-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7DH06-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
 /*
@@ -215,21 +392,28 @@ static int uart2_pins[] = {
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+			"pcm037");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
 	/* LAN9217 IRQ pin */
-	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-				"pcm037-eth"))
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
 		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	}
+
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@ static void __init mxc_board_init(void)
 #endif
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	if (!gpio_usbotg_hs_activate())
+		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 00000000000..8d27c324abf
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-LQ035Q7",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm043_flash_data,
+	},
+	.resource = &pcm043_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563",
+	}
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&pcm043_flash,
+	&mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+	i2c_register_board_info(0, pcm043_i2c_devices,
+			ARRAY_SIZE(pcm043_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+	.init	= pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+	/* Maintainer: Pengutronix */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48fd8f..82b31c4ab11 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 79df60c20e7..43da8bb4926 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
 {
 	int irq;
 
-	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
 
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		set_irq_chip(irq, &netx_hif_chip);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89c5fa..55ecc01ea20 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-#	select GPIOEXPANDER_OMAP
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5d754..6867cd3ad0b 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
+mailbox_mach-objs		:= mailbox.o
+
 led-y := leds.o
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed1365319..e70fc7c66bb 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
 #include <mach/common.h>
 #include <mach/dsp_common.h>
 #include <mach/omapfb.h>
+#include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	},
 };
 
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+	.te_connected		= 1,
+};
+
+static void hwa742_dev_init(void)
+{
+	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
 
 /* assume no Mini-AB port */
 
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
+	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
 	omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51dc612..436eed22801 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@ int __init omap1_clk_init(void)
 	arm_idlect1_mask = ~0;
 
 	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	cpu_mask = 0;
 	if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f5311..5218943c91c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <mach/tc.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/dma.h>
 #include <mach/dmtimer.h>
 
+#include "pm.h"
+
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
  * going idle we continue to do idle even if we get
  * a clock tick interrupt . .
  */
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
 {
 	extern __u32 arm_idlect1_mask;
 	__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void)
 #define EN_APICK	6	/* ARM_IDLECT2 */
 #define DSP_EN		1	/* ARM_RSTCT1 */
 
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
 {
 	unsigned long arg0 = 0, arg1 = 0;
 
@@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state)
 	{
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
-		omap_pm_suspend();
+		omap1_pm_suspend();
 		break;
 	default:
 		return -EINVAL;
@@ -683,7 +684,7 @@ static int __init omap_pm_init(void)
 		return -ENODEV;
 	}
 
-	pm_idle = omap_pm_idle;
+	pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap730())
 		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
index ce6ee792753..9ed5e2c1de4 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
 /*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
  *
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
  *
  * Author: MontaVista Software, Inc.
  *	   support@mvista.com
@@ -31,8 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
 
 /*
  * ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
+	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
 #endif
 
@@ -115,29 +114,27 @@
 
 #include <linux/clk.h>
 
+extern struct kset power_subsys;
+
 extern void prevent_idle_sleep(void);
 extern void allow_idle_sleep(void);
 
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
-					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
 
 extern unsigned int omap730_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
 extern unsigned int omap730_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
 #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
 
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
 /*
  * List of global OMAP registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@ enum mpui1610_save_state {
 #endif
 };
 
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
 #endif /* ASSEMBLER */
 #endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b148f..f754cee4f3c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac932092..22e8568339b 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
 
 		.text
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c..a755eb5e236 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
+	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3EVM
+	bool "OMAP 3530 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+	bool "OMAP3 Zoom2 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+	bool "OMAP 4430 SDP board"
+	depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c49d9bfa3ab..735bae5b0de 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,21 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
-		clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common				= irq.o sdrc.o
+prcm-common				= prcm.o powerdomain.o
+clock-common				= clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
+# SMP support ONLY available for OMAP4
+obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
@@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
+iommu-y					+= iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
@@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y					+= usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
+obj-y					+= $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
+obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 22143651037..9c3fdcdf76c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SDP2430_CS0_BASE	0x04000000
-#define	SDP2430_FLASH_CS	0
-#define	SDP2430_SMC91X_CS	5
-
-#define SDP2430_ETHR_GPIO_IRQ		149
+#define SECONDARY_LCD_GPIO		147
 
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct resource sdp2430_smc91x_resources[] = {
-	[0] = {
-		.start	= SDP2430_CS0_BASE,
-		.end	= SDP2430_CS0_BASE + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp2430_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+	.name		= "sdp2430_lcd",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),
-	.resource	= sdp2430_smc91x_resources,
 };
 
 static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_smc91x_device,
 	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
-static inline void __init sdp2430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int rate;
-	struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
 
-	eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
 
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	/* Make sure CS1 timings are correct, for 2430 always muxed */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else { /* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
+};
 
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
 
-	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			SDP2430_ETHR_GPIO_IRQ);
-		gpmc_cs_free(eth_cs);
-		goto out;
-	}
-	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
 
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init omap_2430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp2430_init_smc91x();
 }
 
 static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
 
 static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
 
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
+	int ret;
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+	if (ret == 0)
+		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed927497212..496a90e4ea7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
 
 #include <mach/control.h>
 #include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
 
+#include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
-#define SDP3430_SMC91X_CS		3
-
 #define SDP3430_TS_GPIO_IRQ_SDPV1	3
 #define SDP3430_TS_GPIO_IRQ_SDPV2	2
 
@@ -56,24 +54,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static struct resource sdp3430_smc91x_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp3430_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
-	.resource	= sdp3430_smc91x_resources,
-};
-
 static int sdp3430_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 };
 
 static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_smc91x_device,
 	&sdp3430_lcd_device,
 };
 
-static inline void __init sdp3430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	int eth_gpio = 0;
-
-	eth_cs = SDP3430_SMC91X_CS;
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
-	else
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
-	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
-	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			eth_gpio);
-		return;
-	}
-	gpio_direction_input(eth_gpio);
-}
-
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp3430_init_smc91x();
 }
 
 static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init();
+	board_smc91x_init();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 00000000000..57e477bd89c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0fcda1..d8bc0a7dcb8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap		= ldp_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+	[0] = {
+		.code			= KEY_ENTER,
+		.gpio			= 101,
+		.desc			= "enter sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[1] = {
+		.code			= KEY_F1,
+		.gpio			= 102,
+		.desc			= "func 1",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[2] = {
+		.code			= KEY_F2,
+		.gpio			= 103,
+		.desc			= "func 2",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[3] = {
+		.code			= KEY_F3,
+		.gpio			= 104,
+		.desc			= "func 3",
+		.active_low		= 1,
+		.debounce_interval 	= 30,
+	},
+	[4] = {
+		.code			= KEY_F4,
+		.gpio			= 105,
+		.desc			= "func 4",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[5] = {
+		.code			= KEY_LEFT,
+		.gpio			= 106,
+		.desc			= "left sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[6] = {
+		.code			= KEY_RIGHT,
+		.gpio			= 107,
+		.desc			= "right sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[7] = {
+		.code			= KEY_UP,
+		.gpio			= 108,
+		.desc			= "up sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[8] = {
+		.code			= KEY_DOWN,
+		.gpio			= 109,
+		.desc			= "down sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+	.buttons		= ldp_gpio_keys_buttons,
+	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
+	.rep			= 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ldp_gpio_keys,
+	},
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
 };
 
 static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct platform_device ldp_lcd_device = {
+	.name		= "ldp_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
+	{ OMAP_TAG_LCD,		&ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
+static struct twl4030_madc_platform_data ldp_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ldp_vmmc1_supply,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.madc		= &ldp_madc_data,
+	.usb		= &ldp_usb_data,
+	.vmmc1		= &ldp_vmmc1,
 	.gpio		= &ldp_gpio_data,
+	.keypad		= &ldp_kp_twl4030_data,
 };
 
 static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smsc911x_device,
+	&ldp_lcd_device,
+	&ldp_gpio_keys_device,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	ts_gpio = 54;
+	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(ldp_spi_board_info,
+				ARRAY_SIZE(ldp_spi_board_info));
+	ads7846_dev_init();
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
+
+	twl4030_mmc_init(mmc);
+	/* link regulators to MMC adapters */
+	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d1f9a..991ac9c3803 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 
 #include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
 static struct gpio_led gpio_leds[];
 
 static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	beagle_vmmc1_supply.dev = mmc[0].dev;
+	beagle_vsim_supply.dev = mmc[0].dev;
+
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
 	.setup		= beagle_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply beagle_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdvi_supply,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.gpio		= &beagle_gpio_data,
+	.vmmc1		= &beagle_vmmc1,
+	.vsim		= &beagle_vsim,
+	.vdac		= &beagle_vdac,
+	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 00000000000..d3cc145814d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO	175
+
+#define OMAP3EVM_ETHR_START	0x2c000000
+#define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_GPIO_IRQ	176
+#define OMAP3EVM_SMC911X_CS	5
+
+static struct resource omap3evm_smc911x_resources[] = {
+	[0] =	{
+		.start	= OMAP3EVM_ETHR_START,
+		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
+	.resource	= &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3EVM_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+			OMAP3EVM_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 63,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "omap3evm::ledb",
+		/* normally not visible (board underside) */
+		.default_trigger	= "default-on",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(L8_34XX_GPIO63);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	platform_device_register(&leds_gpio);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+	.rows		= 4,
+	.cols		= 4,
+	.keymap		= omap3evm_keymap,
+	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3evm_kp_data,
+	.madc		= &omap3evm_madc_data,
+	.usb		= &omap3evm_usb_data,
+	.gpio		= &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3evm_twldata,
+	},
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+			ARRAY_SIZE(omap3evm_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name		= "omap3evm_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+	[0] = {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+	omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+	&omap3_evm_lcd_device,
+	&omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+	omap3_evm_i2c_init();
+
+	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+	spi_register_board_info(omap3evm_spi_board_info,
+				ARRAY_SIZE(omap3evm_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init();
+	ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_evm_map_io,
+	.init_irq	= omap3_evm_init_irq,
+	.init_machine	= omap3_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c6cf1..e32aa23ce96 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME		127
+
+static struct gpio_led pandora_gpio_leds[] = {
+	{
+		.name			= "pandora::sd1",
+		.default_trigger	= "mmc0",
+		.gpio			= 128,
+	}, {
+		.name			= "pandora::sd2",
+		.default_trigger	= "mmc1",
+		.gpio			= 129,
+	}, {
+		.name			= "pandora::bluetooth",
+		.gpio			= 158,
+	}, {
+		.name			= "pandora::wifi",
+		.gpio			= 159,
+	},
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+	.leds		= pandora_gpio_leds,
+	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_led_data,
+	},
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
+	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
+	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
+	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
+	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
+	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
+	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
+	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
+	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
+	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
+	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
+	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
+	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
+	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
+	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+	.buttons	= pandora_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_key_info,
+	},
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+	/* set debounce time for GPIO banks 4 and 6 */
+	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+	/* col, row, code */
+	KEY(0, 0, KEY_9),
+	KEY(0, 1, KEY_0),
+	KEY(0, 2, KEY_BACKSPACE),
+	KEY(0, 3, KEY_O),
+	KEY(0, 4, KEY_P),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_L),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 0, KEY_8),
+	KEY(1, 1, KEY_7),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_5),
+	KEY(1, 4, KEY_4),
+	KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_2),
+	KEY(1, 7, KEY_1),
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_U),
+	KEY(2, 2, KEY_Y),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_R),
+	KEY(2, 5, KEY_E),
+	KEY(2, 6, KEY_W),
+	KEY(2, 7, KEY_Q),
+	KEY(3, 0, KEY_J),
+	KEY(3, 1, KEY_H),
+	KEY(3, 2, KEY_G),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_D),
+	KEY(3, 5, KEY_S),
+	KEY(3, 6, KEY_A),
+	KEY(3, 7, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_N),
+	KEY(4, 1, KEY_B),
+	KEY(4, 2, KEY_V),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_X),
+	KEY(4, 5, KEY_Z),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 7, KEY_COMMA),
+	KEY(5, 0, KEY_M),
+	KEY(5, 1, KEY_SPACE),
+	KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+	.rows		= 8,
+	.cols		= 6,
+	.keymap		= pandora_keypad_map,
+	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
+	.rep		= 1,
+};
+
 static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
 	.enabled_uarts	= (1 << 2), /* UART3 */
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	twl4030_mmc_init(omap3pandora_mmc);
 
+	/* link regulators to MMC adapters */
+	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
 	return 0;
 }
 
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc2_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.vmmc1		= &pandora_vmmc1,
+	.vmmc2		= &pandora_vmmc2,
+	.keypad		= &pandora_kp_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
+	&pandora_leds_gpio,
+	&pandora_keys_gpio,
 };
 
 static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	pandora_keys_gpio_init();
 	usb_musb_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23bea863..dff5528fbfb 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	twl4030_mmc_init(mmc);
+
+	overo_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+}
+
 static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
+	.usb		= &overo_usb_data,
+	.vmmc1		= &overo_vmmc1,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65950", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-	},
-	{}	/* Terminator */
-};
-
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	overo_flash_init();
 	usb_musb_init();
 	overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a7381729645..da93b86234e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
-
-#define SMC91X_CS			1
-#define SMC91X_GPIO_IRQ			54
-#define SMC91X_GPIO_RESET		164
-#define SMC91X_GPIO_PWRDWN		86
-
-static struct resource rx51_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device rx51_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
-	.resource	= rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3	0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
 
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct platform_device *rx51_peripherals_devices[] = {
-	&rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
-	struct gpmc_timings t;
-	const int t2_r = 45;		/* t2 in Figure 12.10 */
-	const int t2_w = 30;		/* t2 in Figure 12.11 */
-	const int t3 = 15;		/* t3 in Figure 12.10 */
-	const int t5_r = 0;		/* t5 in Figure 12.10 */
-	const int t6_r = 45;		/* t6 in Figure 12.10 */
-	const int t6_w = 0;		/* t6 in Figure 12.11 */
-	const int t7_w = 15;		/* t7 in Figure 12.11 */
-	const int t15 = 12;		/* t15 in Figure 12.2 */
-	const int t20 = 185;		/* t20 in Figure 12.2 */
-
-	memset(&t, 0, sizeof(t));
-
-	t.cs_on = t15;
-	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.adv_on = t3;			/* Figure 12.10 */
-	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
-	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
-	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
-	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
-	t.rd_cycle = t20;		/* Figure 12.2 */
-	t.wr_cycle = t20;		/* Figure 12.4 */
-	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
-
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
-	return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
-	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
-	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
-	smc91x_init_gpmc(SMC91X_CS);
-
-	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
-		goto free1;
-
-	gpio_direction_input(SMC91X_GPIO_IRQ);
-	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
-	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
-	if (ret)
-		goto free2;
-	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
-	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
-	if (ret)
-		goto free3;
-	gpio_direction_output(SMC91X_GPIO_RESET, 0);
-	gpio_set_value(SMC91X_GPIO_RESET, 1);
-	msleep(100);
-	gpio_set_value(SMC91X_GPIO_RESET, 0);
-
-	return;
-
-free3:
-	gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
-	gpio_free(SMC91X_GPIO_IRQ);
-free1:
-	gpmc_cs_free(SMC91X_CS);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
 };
 
 /* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
 	.constraints = {
 		.name			= "VCAM_DIG_18",
 		.min_uV			= 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
 	},
 };
 
+static struct regulator_init_data rx51_vaux3_mmc = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
 static struct regulator_init_data rx51_vaux4 = {
 	.constraints = {
 		.name			= "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-	.vaux3			= &rx51_vaux3,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
-	.vmmc2			= &rx51_vmmc2,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
 };
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 
 static int __init rx51_i2c_init(void)
 {
+	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+	else {
+		rx51_twldata.vaux3 = &rx51_vaux3_cam;
+		rx51_twldata.vmmc2 = &rx51_vmmc2;
+	}
 	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "log",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x40000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 65,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 54,
+	.gpio_pwrdwn	= 86,
+	.gpio_reset	= 164,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
 
 void __init rx51_peripherals_init(void)
 {
-	platform_add_devices(rx51_peripherals_devices,
-				ARRAY_SIZE(rx51_peripherals_devices));
 	rx51_i2c_init();
-	rx51_init_smc91x();
+	board_onenand_init();
+	board_smc91x_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 00000000000..bac5c4321ff
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS	7
+#define ZOOM2_SMSC911X_GPIO	158
+#define ZOOM2_QUADUART_CS	3
+#define ZOOM2_QUADUART_GPIO	102
+#define QUART_CLK		1843200
+#define DEBUG_BASE		0x08000000
+#define ZOOM2_ETHR_START	DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+	[0] = {
+		.start	= ZOOM2_ETHR_START,
+		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
+	.resource	= zoom2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &zoom2_smsc911x_config,
+	},
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = ZOOM2_SMSC911X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+		return;
+	}
+
+	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+				eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= 0x10000000,
+		.irq		= OMAP_GPIO_IRQ(102),
+		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= QUART_CLK,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+	int quart_cs;
+	unsigned long cs_mem_base;
+	int quart_gpio = 0;
+
+	quart_cs = ZOOM2_QUADUART_CS;
+
+	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem"
+				"for Quad UART(TL16CP754C)\n");
+		return;
+	}
+
+	quart_gpio = ZOOM2_QUADUART_GPIO;
+
+	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+								quart_gpio);
+		return;
+	}
+	gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+	int debug_board_detect = 0;
+
+	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+		"board detect\n", debug_board_detect);
+		return 0;
+	}
+	gpio_direction_input(debug_board_detect);
+
+	if (!gpio_get_value(debug_board_detect)) {
+		gpio_free(debug_board_detect);
+		return 0;
+	}
+	return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+	&zoom2_smsc911x_device,
+	&zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+	if (!omap_zoom2_debugboard_detect())
+		return 0;
+
+	zoom2_init_smsc911x();
+	zoom2_init_quaduart();
+	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 00000000000..bcc0f7632de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+	{ OMAP_TAG_UART,	&zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom2_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+			ARRAY_SIZE(zoom2_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap_serial_init();
+	omap_zoom2_debugboard_init();
+	twl4030_mmc_init(mmc);
+	usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom2_map_io,
+	.init_irq	= omap_zoom2_init_irq,
+	.init_machine	= omap_zoom2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a153441..ba528f85749 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
 		return;
 
 	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 }
 
 /*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
 
-	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
-	       clk->name, target_rate);
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
 
 	*new_div = 1;
 
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			pr_err("clock: clksel_rate table not sorted "
 			       "for clock %s", clk->name);
 
 		last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	}
 
 	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor for target "
+		pr_err("clock: Could not find divisor for target "
 		       "rate %ld for clock %s parent %s\n", target_rate,
 		       clk->name, clk->parent->name);
 		return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 	*new_div = clkr->div;
 
-	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
-	       (clk->parent->rate / clkr->div));
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
 
 	return (clk->parent->rate / clkr->div);
 }
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef333e29..44de0271fc2 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
 static struct clk *vclk;
 static struct clk *sclk;
 
+static void __iomem *prcm_clksrc_ctrl;
+
 /*-------------------------------------------------------------------------
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div = __raw_readl(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
 	struct omap_clk *c;
 	u32 clkrate;
 
-	if (cpu_is_omap242x())
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_243X;
+	}
 
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb40fc..458f00cdcbe 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
 static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa42bd8..9e43fe5209d 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
 	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
 	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
+	u32 unlock_dll = 0;
 	unsigned long validrate, sdrcrate;
 	struct omap_sdrc_params *sp;
 
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!sp)
 		return -EINVAL;
 
-	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		validrate);
-	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
-		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
 	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
 	WARN_ON(new_div != 1 && new_div != 2);
 
 	/* REVISIT: Add SDRC_MR changing to this code also */
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div);
+				  sp->actim_ctrlb, new_div, unlock_dll);
 
 	return 0;
 }
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
 		if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e9aa1..e433aec4efd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
 static unsigned long omap3_dpll_recalc(struct clk *clk);
 static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static const struct clksel omap343x_gpt_clksel[] = {
 	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
 	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
 /* SECURITY_L4_ICK2 based clocks */
 
 static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da1918..fe319ae4ca0 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a36aae..6923deb98a2 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP3430_EN_ICR					(1 << 29)
@@ -161,6 +163,8 @@
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
 #define OMAP3430_EN_OMAPCTRL				(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT				3
 #define OMAP3430_EN_SDRC				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
@@ -176,6 +180,10 @@
 #define OMAP3430_EN_DES1				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT				3
+#define OMAP3430_EN_MAD2D				(1 << 3)
+
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
 #define OMAP3430ES2_EN_TS_MASK				(1 << 1)
@@ -231,6 +239,8 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT			31
 #define OMAP3430ES2_AUTO_MMC3				(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
 #define OMAP3430ES2_AUTO_ICR				(1 << 29)
@@ -287,6 +297,8 @@
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
 #define OMAP3430ES1_AUTO_D2D				(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT			3
 #define OMAP3430_AUTO_SSI				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
@@ -308,6 +320,8 @@
 #define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT			3
+#define OMAP3430_AUTO_MAD2D				(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78c91e..1d3c93bf86d 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global CM registers
@@ -38,6 +33,7 @@
 #define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
 #define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
 
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 00000000000..2fd22f9c5f0
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts:	Juha Yrjola
+ *		Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+
+	const int t_cer = 15;
+	const int t_avdp = 12;
+	const int t_aavdh = 7;
+	const int t_ce = 76;
+	const int t_aa = 76;
+	const int t_oe = 20;
+	const int t_cez = 20; /* max of t_cez, t_oez */
+	const int t_ds = 30;
+	const int t_wpl = 40;
+	const int t_wph = 30;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = 0;
+	t.cs_on = 0;
+	t.adv_on = 0;
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Write */
+	t.adv_wr_off = t.adv_rd_off;
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+		t.wr_data_mux_bus = t.we_on;
+		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+	}
+	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Configure GPMC for asynchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+				int sync_read, int sync_write, int hf)
+{
+	u32 reg;
+
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+	if (sync_write)
+		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	if (hf)
+		reg |= ONENAND_SYS_CFG1_HF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_HF;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
+{
+	struct gpmc_timings t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_ds   = 30;
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int err, ticks_cez;
+	int cs = cfg->cs;
+	u32 reg;
+
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		err = omap2_onenand_set_async_mode(cs, onenand_base);
+		if (err)
+			return err;
+		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+		switch ((reg >> 4) & 0xf) {
+		case 0:
+			freq = 40;
+			break;
+		case 1:
+			freq = 54;
+			break;
+		case 2:
+			freq = 66;
+			break;
+		case 3:
+			freq = 83;
+			break;
+		case 4:
+			freq = 104;
+			break;
+		default:
+			freq = 54;
+			break;
+		}
+		first_time = 1;
+	}
+
+	switch (freq) {
+	case 83:
+		min_gpmc_clk_period = 12; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		sync_write = 0;
+		break;
+	}
+
+	tick_ns = gpmc_ticks_to_ns(1);
+	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	gpmc_clk_ns = gpmc_ticks_to_ns(div);
+	if (gpmc_clk_ns < 15) /* >66Mhz */
+		hf = 1;
+	if (hf)
+		latency = 6;
+	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+		latency = 3;
+	else
+		latency = 4;
+
+	if (first_time)
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
+
+	if (div == 1) {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg |= (1 << 7);
+		reg |= (1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	} else {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg &= ~(1 << 7);
+		reg &= ~(1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	}
+
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = min_gpmc_clk_period;
+	t.cs_on = 0;
+	t.adv_on = 0;
+	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+	t.page_burst_access = gpmc_clk_ns;
+
+	/* Read */
+	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+		     ticks_cez);
+
+	/* Write */
+	if (sync_write) {
+		t.adv_wr_off = t.adv_rd_off;
+		t.we_on  = 0;
+		t.we_off = t.cs_rd_off;
+		t.cs_wr_off = t.cs_rd_off;
+		t.wr_cycle  = t.rd_cycle;
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+					gpmc_ns_to_ticks(min_gpmc_clk_period +
+					t_rdyo));
+			t.wr_access = t.access;
+		}
+	} else {
+		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+							t_avdp, t_cer));
+		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = t.we_on;
+			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+		}
+	}
+
+	/* Configure GPMC for synchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_WRAPBURST_SUPP |
+			  GPMC_CONFIG1_READMULTIPLE_SUPP |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+			  GPMC_CONFIG1_PAGE_LEN(2) |
+			  (cpu_is_omap34xx() ? 0 :
+				(GPMC_CONFIG1_WAIT_READ_MON |
+				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_DEVICETYPE_NOR |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+	return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+	struct device *dev = &gpmc_onenand_device.dev;
+
+	/* Set sync timings in GPMC */
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+			freq) < 0) {
+		dev_err(dev, "Unable to set synchronous mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+	gpmc_onenand_data = _onenand_data;
+	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
+	if (platform_device_register(&gpmc_onenand_device) < 0) {
+		printk(KERN_ERR "Unable to register OneNAND device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 00000000000..df99d31d8b6
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact:	Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smc91x_info,
+	},
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
+	const int t4_r = 20;	/* Figure 12.2 read */
+	const int t4_w = 5;	/* Figure 12.4 write */
+	const int t5 = 25;	/* Figure 12.2 read */
+	const int t6 = 15;	/* Figure 12.2 read */
+	const int t7 = 5;	/* Figure 12.4 write */
+	const int t8 = 5;	/* Figure 12.4 write */
+	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
+	u32 l;
+
+	memset(&t, 0, sizeof(t));
+
+	/* Read timings */
+	t.cs_on = 0;
+	t.adv_on = t.cs_on;
+	t.oe_on = t.adv_on + t3;
+	t.access = t.oe_on + t5;
+	t.oe_off = t.access;
+	t.adv_rd_off = t.oe_off + max(t4_r, t6);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle = t20 - t.oe_on;
+
+	/* Write timings */
+	t.we_on = t.adv_on + t3;
+
+	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+		t.wr_data_mux_bus = t.we_on;
+		t.we_off = t.wr_data_mux_bus + t7;
+	} else
+		t.we_off = t.we_on + t7;
+	if (cpu_is_omap34xx())
+		t.wr_access = t.we_off;
+	t.adv_wr_off = t.we_off + max(t4_w, t8);
+	t.cs_wr_off = t.we_off + t4_w;
+	t.wr_cycle = t20 - t.we_on;
+
+	l = GPMC_CONFIG1_DEVICESIZE_16;
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		l |= GPMC_CONFIG1_MUXADDDATA;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		l |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (gpmc_cfg->wait_pin)
+		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+	/*
+	 * FIXME: Calculate the address and data bus muxed timings.
+	 * Note that at least adv_rd_off needs to be changed according
+	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+	 * FPGA in between smc91x and omap as the timings are different
+	 * from above?
+	 */
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		return 0;
+
+	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+		gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpmc_cfg->retime) {
+		ret = gpmc_cfg->retime();
+		if (ret != 0)
+			goto free1;
+	}
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+	if (gpmc_cfg->gpio_pwrdwn) {
+		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+		if (ret)
+			goto free2;
+		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+	}
+
+	if (gpmc_cfg->gpio_reset) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+		if (ret)
+			goto free3;
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+	}
+
+	if (platform_device_register(&gpmc_smc91x_device) < 0) {
+		printk(KERN_ERR "Unable to register smc91x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free3;
+	}
+
+	return;
+
+free3:
+	if (gpmc_cfg->gpio_pwrdwn)
+		gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5..f91934b2b09 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
  *
  * Author: Juha Yrjola
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap44xx()) {
+		ck = "gpmc_fck";
+		l = OMAP44XX_GPMC_BASE;
 	}
 
 	gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8..458990e20c6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
 		omap24xx_check_revision();
 	else if (cpu_is_omap34xx())
 		omap34xx_check_revision();
-	else
+	else if (cpu_is_omap44xx()) {
+		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+		return;
+	} else
 		pr_err("OMAP revision unknown, please fix!\n");
 
 	/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a232..32afd944821 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
  *
  * Author:
  *	Juha Yrjola <juha.yrjola@nokia.com>
  *	Syed Khasim <x0khasim@ti.com>
  *
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -30,6 +32,7 @@
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 
+#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
 #include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
-
+#endif
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 	},
 };
 #endif
+#ifdef	CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
+		.length		= L3_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
+		.length		= L4_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
+		.length		= L4_WK_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+		.length		= OMAP44XX_GPMC_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
+		.length		= L4_PER_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_EMU_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
+		.length		= L4_EMU_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
 
 void __init omap2_map_common_io(void)
 {
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
 	 * revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 00000000000..015f22a53ea
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION	0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT	3
+#define MMU_SYS_IDLE_FORCE	(0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE	(1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET	(1 << 1)
+#define MMU_SYS_AUTOIDLE	1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE	1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT	(1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
+#define MMU_IRQ_EMUMISS		(1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
+#define MMU_IRQ_TLBMISS		(1 << 0)
+#define MMU_IRQ_MASK	\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+	 MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT		1
+#define MMU_CNTL_MASK		(7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB	(1 << 3)
+#define MMU_CNTL_TWL_EN		(1 << 2)
+#define MMU_CNTL_MMU_EN		(1 << 1)
+
+#define get_cam_va_mask(pgsz)				\
+	(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_1M)  ? 0xfff00000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+	u32 l, pa;
+	unsigned long timeout;
+
+	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
+		return -EINVAL;
+
+	pa = virt_to_phys(obj->iopgd);
+	if (!IS_ALIGNED(pa, SZ_16K))
+		return -EINVAL;
+
+	iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = iommu_read_reg(obj, MMU_SYSSTATUS);
+		if (l & MMU_SYS_RESETDONE)
+			break;
+	} while (time_after(jiffies, timeout));
+
+	if (!(l & MMU_SYS_RESETDONE)) {
+		dev_err(obj->dev, "can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
+	l = iommu_read_reg(obj, MMU_REVISION);
+	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+		 (l >> 4) & 0xf, l & 0xf);
+
+	l = iommu_read_reg(obj, MMU_SYSCONFIG);
+	l &= ~MMU_SYS_IDLE_MASK;
+	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+	iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+	iommu_write_reg(obj, pa, MMU_TTB);
+
+	l = iommu_read_reg(obj, MMU_CNTL);
+	l &= ~MMU_CNTL_MASK;
+	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	iommu_write_reg(obj, l, MMU_CNTL);
+
+	return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	l &= ~MMU_CNTL_MASK;
+	iommu_write_reg(obj, l, MMU_CNTL);
+	iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+	int i;
+	u32 stat, da;
+	const char *err_msg[] =	{
+		"tlb miss",
+		"translation fault",
+		"emulation miss",
+		"table walk fault",
+		"multi hit fault",
+	};
+
+	stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+	stat &= MMU_IRQ_MASK;
+	if (!stat)
+		return 0;
+
+	da = iommu_read_reg(obj, MMU_FAULT_AD);
+	*ra = da;
+
+	dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+	for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+		if (stat & (1 << i))
+			printk("%s ", err_msg[i]);
+	}
+	printk("\n");
+
+	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+	return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+	cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+	iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+	u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+	u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+	return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+	struct cr_regs *cr;
+
+	if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+		dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+			e->da);
+		return ERR_PTR(-EINVAL);
+	}
+
+	cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return ERR_PTR(-ENOMEM);
+
+	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+	return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+	return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+	u32 attr;
+
+	attr = e->mixed << 5;
+	attr |= e->endian;
+	attr |= e->elsz >> 3;
+	attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+	return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+	char *p = buf;
+
+	/* FIXME: Need more detail analysis of cam/ram */
+	p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+	return p - buf;
+}
+
+#define pr_reg(name)							\
+	p += sprintf(p, "%20s: %08x\n",					\
+		     __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	char *p = buf;
+
+	pr_reg(REVISION);
+	pr_reg(SYSCONFIG);
+	pr_reg(SYSSTATUS);
+	pr_reg(IRQSTATUS);
+	pr_reg(IRQENABLE);
+	pr_reg(WALKING_ST);
+	pr_reg(CNTL);
+	pr_reg(FAULT_AD);
+	pr_reg(TTB);
+	pr_reg(LOCK);
+	pr_reg(LD_TLB);
+	pr_reg(CAM);
+	pr_reg(RAM);
+	pr_reg(GFLUSH);
+	pr_reg(FLUSH_ENTRY);
+	pr_reg(READ_CAM);
+	pr_reg(READ_RAM);
+	pr_reg(EMU_FAULT_AD);
+
+	return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		p[i] = iommu_read_reg(obj, i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		iommu_write_reg(obj, p[i], i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	e->da		= cr->cam & MMU_CAM_VATAG_MASK;
+	e->pa		= cr->ram & MMU_RAM_PADDR_MASK;
+	e->valid	= cr->cam & MMU_CAM_V;
+	e->pgsz		= cr->cam & MMU_CAM_PGSZ_MASK;
+	e->endian	= cr->ram & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= cr->ram & MMU_RAM_ELSZ_MASK;
+	e->mixed	= cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+	.version	= IOMMU_ARCH_VERSION,
+
+	.enable		= omap2_iommu_enable,
+	.disable	= omap2_iommu_disable,
+	.fault_isr	= omap2_iommu_fault_isr,
+
+	.tlb_read_cr	= omap2_tlb_read_cr,
+	.tlb_load_cr	= omap2_tlb_load_cr,
+
+	.cr_to_e	= omap2_cr_to_e,
+	.cr_to_virt	= omap2_cr_to_virt,
+	.alloc_cr	= omap2_alloc_cr,
+	.cr_valid	= omap2_cr_valid,
+	.dump_cr	= omap2_dump_cr,
+
+	.get_pte_attr	= omap2_get_pte_attr,
+
+	.save_ctx	= omap2_iommu_save_ctx,
+	.restore_ctx	= omap2_iommu_restore_ctx,
+	.dump_ctx	= omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+	return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+	uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c45587..b82863887f1 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
-
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
-	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
+int omap_irq_pending(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+		int irq;
+
+		for (irq = 0; irq < bank->nr_irqs; irq += 32)
+			if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+					       ((irq >> 5) << 5)))
+				return 1;
+	}
+	return 0;
+}
+
 void __init omap_init_irq(void)
 {
 	unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e7220..9756a878fd9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -26,31 +26,9 @@
 
 #include "mmc-twl4030.h"
 
-#if defined(CONFIG_TWL4030_CORE) && \
-	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
-#define LDO_CLR			0x00
-#define VSEL_S2_CLR		0x40
-
-#define VMMC1_DEV_GRP		0x27
-#define VMMC1_CLR		0x00
-#define VMMC1_315V		0x03
-#define VMMC1_300V		0x02
-#define VMMC1_285V		0x01
-#define VMMC1_185V		0x00
-#define VMMC1_DEDICATED		0x2A
-
-#define VMMC2_DEV_GRP		0x2B
-#define VMMC2_CLR		0x40
-#define VMMC2_315V		0x0c
-#define VMMC2_300V		0x0b
-#define VMMC2_285V		0x0a
-#define VMMC2_280V		0x09
-#define VMMC2_260V		0x08
-#define VMMC2_185V		0x06
-#define VMMC2_DEDICATED		0x2E
-
-#define VMMC_DEV_GRP_P1		0x20
+#if defined(CONFIG_REGULATOR) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
 
 static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
-	u8		twl_vmmc_dev_grp;
-	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
-	{
-		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC1_DEDICATED,
-	},
-	{
-		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC2_DEDICATED,
-	},
-};
+	/* Vcc == configured supply
+	 * Vcc_alt == optional
+	 *   -	MMC1, supply for DAT4..DAT7
+	 *   -	MMC2/MMC2, external level shifter voltage supply, for
+	 *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+	 */
+	struct regulator		*vcc;
+	struct regulator		*vcc_aux;
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
 
 static int twl_mmc_card_detect(int irq)
 {
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
 	int ret = 0;
 	int i;
 
-	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
-	if (ret)
-		goto done;
-	ret = gpio_direction_input(mmc->slots[0].switch_pin);
-	if (ret)
-		goto err;
+	/* MMC/SD/SDIO doesn't require a card detect switch */
+	if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+		ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+		if (ret)
+			goto done;
+		ret = gpio_direction_input(mmc->slots[0].switch_pin);
+		if (ret)
+			goto err;
+	}
 
+	/* require at least main regulator */
 	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
 		if (hsmmc[i].name == mmc->slots[0].name) {
+			struct regulator *reg;
+
 			hsmmc[i].mmc = mmc;
+
+			reg = regulator_get(dev, "vmmc");
+			if (IS_ERR(reg)) {
+				dev_dbg(dev, "vmmc regulator missing\n");
+				/* HACK: until fixed.c regulator is usable,
+				 * we don't require a main regulator
+				 * for MMC2 or MMC3
+				 */
+				if (i != 0)
+					break;
+				ret = PTR_ERR(reg);
+				goto err;
+			}
+			hsmmc[i].vcc = reg;
+			mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+			/* allow an aux regulator */
+			reg = regulator_get(dev, "vmmc_aux");
+			hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+			/* UGLY HACK:  workaround regulator framework bugs.
+			 * When the bootloader leaves a supply active, it's
+			 * initialized with zero usecount ... and we can't
+			 * disable it without first enabling it.  Until the
+			 * framework is fixed, we need a workaround like this
+			 * (which is safe for MMC, but not in general).
+			 */
+			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+				regulator_enable(hsmmc[i].vcc);
+				regulator_disable(hsmmc[i].vcc);
+			}
+			if (hsmmc[i].vcc_aux) {
+				if (regulator_is_enabled(reg) > 0) {
+					regulator_enable(reg);
+					regulator_disable(reg);
+				}
+			}
+
 			break;
 		}
 	}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
-	int ret;
-	u8 vmmc = 0, dev_grp_val;
-
-	if (!vdd)
-		goto doit;
-
-	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
-		/* VMMC1:  max 220 mA.  And for 8-bit mode,
-		 * VSIM:  max 50 mA
-		 */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC1_185V;
-			/* and VSIM_180V */
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC1_285V;
-			/* and VSIM_280V */
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC1_300V;
-			/* and VSIM_300V */
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC1_315V;
-			/* error if VSIM needed */
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
-		/* VMMC2:  max 100 mA */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC2_185V;
-			break;
-		case MMC_VDD_25_26:
-		case MMC_VDD_26_27:
-			vmmc = VMMC2_260V;
-			break;
-		case MMC_VDD_27_28:
-			vmmc = VMMC2_280V;
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC2_285V;
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC2_300V;
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC2_315V;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-doit:
-	if (vdd)
-		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
-	else
-		dev_grp_val = LDO_CLR;		/* Power down */
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret || !vdd)
-		return ret;
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					vmmc, c->twl_mmc_dedicated);
-
-	return ret;
-}
-
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
 	 *
 	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
 	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
 	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, 0);
+		ret = mmc_regulator_set_ocr(c->vcc, 0);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
-	int ret;
+	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/* If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
 	/*
-	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
 	 * support cards using voltages other than VDDS (1.8V nominal).  When a
 	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 *
+	 * In some cases this regulator won't support enable/disable;
+	 * e.g. it's a fixed rail for a WLAN chip.
+	 *
+	 * In other cases vcc_aux switches interface power.  Example, for
+	 * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
+	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
+		/* only MMC2 supports a CLKIN */
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
 
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 			omap_ctrl_writel(reg, control_devconf1_offset);
 		}
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
+		/* enable interface voltage rail, if needed */
+		if (ret == 0 && c->vcc_aux) {
+			ret = regulator_enable(c->vcc_aux);
+			if (ret < 0)
+				ret = mmc_regulator_set_ocr(c->vcc, 0);
+		}
 	} else {
-		ret = twl_mmc_set_voltage(c, 0);
+		if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+			ret = regulator_disable(c->vcc_aux);
+		if (ret == 0)
+			ret = mmc_regulator_set_ocr(c->vcc, 0);
 	}
 
 	return ret;
 }
 
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
-		int vdd)
-{
-	/*
-	 * Assume MMC3 has self-powered device connected, for example on-board
-	 * chip with external power source.
-	 */
-	return 0;
-}
-
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		mmc->init = twl_mmc_late_init;
 
-		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		/* note: twl4030 card detect GPIOs can disable VMMCx ... */
 		if (gpio_is_valid(c->gpio_cd)) {
-			mmc->init = twl_mmc_late_init;
 			mmc->cleanup = twl_mmc_cleanup;
 			mmc->suspend = twl_mmc_suspend;
 			mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
-		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
-		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that MMC3 device has it's own power source.
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
 		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
 
 		switch (c->mmc) {
 		case 1:
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
-			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
-			mmc->slots[0].set_power = twl_mmc2_set_power;
-			if (c->transceiver)
-				mmc->slots[0].ocr_mask = MMC2_OCR;
-			else
-				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
-			break;
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
 		case 3:
-			mmc->slots[0].set_power = twl_mmc3_set_power;
-			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			/* off-chip level shifting, or none */
+			mmc->slots[0].set_power = twl_mmc23_set_power;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e862429..3807c45c9a6 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
+	int	ocr_mask;	/* temporary HACK */
 };
 
-#if	defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
new file mode 100644
index 00000000000..4afadba0947
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -0,0 +1,46 @@
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA			0x48281804
+
+	__INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #0x0f
+hold:	ldr	r1, =OMAP4_AUX_CORE_BOOT1_PA	@ read from AuxCoreBoot1
+	ldr	r2, [r1]
+	cmp	r2, r0
+	bne	hold
+
+	/*
+	 * we've been released from the cpu_release,secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
new file mode 100644
index 00000000000..8fe8d230f21
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * If any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Update the AuxCoreBoot1 with boot state for secondary core.
+	 * omap_secondary_startup() routine will hold the secondary core till
+	 * the AuxCoreBoot1 register is updated with cpu state
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	smp_wmb();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout))
+		;
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/*
+	 * Write the address of secondary startup routine into the
+	 * AuxCoreBoot0 where ROM code will jump and start executing
+	 * on secondary core once out of WFE
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
+					OMAP4_AUXCOREBOOT_REG0);
+	smp_wmb();
+
+	/*
+	 * Send a 'sev' to wake the secondary core from WFE.
+	 */
+	set_event();
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "OMAP4: strange core count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "OMAP4: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		/*
+		 * Initialise the SCU and wake up the secondary core using
+		 * wakeup_secondary().
+		 */
+		scu_enable(scu_base);
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 00000000000..194189c746c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE	0x480bd400
+#define OMAP3_MMU2_BASE	0x5d000000
+#define OMAP3_MMU1_IRQ	24
+#define OMAP3_MMU2_IRQ	28
+
+
+static unsigned long iommu_base[] __initdata = {
+	OMAP3_MMU1_BASE,
+	OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+	OMAP3_MMU1_IRQ,
+	OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+	{
+		.name = "isp",
+		.nr_tlb_entries = 8,
+		.clk_name = "cam_ick",
+	},
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+	{
+		.name = "iva2",
+		.nr_tlb_entries = 32,
+		.clk_name = "iva2_ck",
+	},
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+	int i, err;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+		struct platform_device *pdev;
+		struct resource res[2];
+
+		pdev = platform_device_alloc("omap-iommu", i);
+		if (!pdev) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+
+		memset(res, 0,  sizeof(res));
+		res[0].start = iommu_base[i];
+		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = res[1].end = iommu_irq[i];
+		res[1].flags = IORESOURCE_IRQ;
+
+		err = platform_device_add_resources(pdev, res,
+						    ARRAY_SIZE(res));
+		if (err)
+			goto err_out;
+		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+					       sizeof(omap3_iommu_pdata[0]));
+		if (err)
+			goto err_out;
+		err = platform_device_add(pdev);
+		if (err)
+			goto err_out;
+		omap3_iommu_pdev[i] = pdev;
+	}
+	return 0;
+
+err_out:
+	while (i--)
+		platform_device_put(omap3_iommu_pdev[i]);
+	return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++)
+		platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 00000000000..6cc375a275b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg)    \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg)     \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+	struct reg {
+		const char *name;
+		u32 val;
+	} regs[32];
+	int reg_count = 0, i;
+	const char *s1 = NULL, *s2 = NULL;
+
+	if (!resume) {
+#if 0
+		/* MPU */
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+		/* INTC */
+		DUMP_INTC_REG(INTC_MIR0, 0x0084);
+		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+		}
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+		/* DSP */
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+		}
+#endif
+	} else {
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+		if (cpu_is_omap24xx())
+			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+	}
+
+	switch (mode) {
+	case 0:
+		s1 = "full";
+		s2 = "retention";
+		break;
+	case 1:
+		s1 = "MPU";
+		s2 = "retention";
+		break;
+	case 2:
+		s1 = "MPU";
+		s2 = "idle";
+		break;
+	}
+
+	if (!resume)
+#ifdef CONFIG_NO_HZ
+		printk(KERN_INFO
+		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+					jiffies));
+#else
+		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+	else
+		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+			us / 1000, us % 1000);
+
+	for (i = 0; i < reg_count; i++)
+		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceaed09c..00000000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
-	local_irq_disable();
-	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
-
-	omap2_sram_idle();
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
-	return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
-	return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap2_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void omap2_pm_finish(void)
-{
-	pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap2_pm_prepare,
-	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
-	return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 00000000000..f7b3baf7667
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 00000000000..db1025562fb
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+				  void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+	f2 &= ~OMAP24XX_EN_UART3;
+
+	if (f1 | f2)
+		return 1;
+	return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+	u32 l;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* There is 1 reference hold for all children of the oscillator
+	 * clock, the following will remove it. If no one else uses the
+	 * oscillator itself it will be disabled if/when we enter retention
+	 * mode.
+	 */
+	clk_disable(osc_ck);
+
+	/* Clear old wake-up events */
+	/* REVISIT: These write to reserved bits? */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Workaround to kill USB */
+	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+	omap2_gpio_prepare_for_retention();
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(0, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	/* One last check for pending IRQs to avoid extra latency due
+	 * to sleeping unnecessarily. */
+	if (omap_irq_pending())
+		goto no_sleep;
+
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	/* Jump to SRAM suspend code */
+	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_POWER));
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+
+no_sleep:
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(0, 1, tmp);
+	}
+	omap2_gpio_resume_after_retention();
+
+	clk_enable(osc_ck);
+
+	/* clear CORE wake-up events */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+	prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+	/* MPU domain wake events */
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x01)
+		prm_write_mod_reg(0x01, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x20)
+		prm_write_mod_reg(0x20, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+	/* Mask future PRCM-to-MPU interrupts */
+	prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+	u32 l;
+
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+		return 0;
+	/* Check for UART3. */
+	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3)
+		return 0;
+	if (sti_console_enabled)
+		return 0;
+
+	return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+	int only_idle = 0;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* Putting MPU into the WFI state while a transfer is active
+	 * seems to cause the I2C block to timeout. Why? Good question. */
+	if (omap2_i2c_active())
+		return;
+
+	/* The peripherals seem not to be able to wake up the MPU when
+	 * it is in retention mode. */
+	if (omap2_allow_mpu_retention()) {
+		/* REVISIT: These write to reserved bits? */
+		prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+		prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+		prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+		/* Try to enter MPU retention */
+		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+				  OMAP_LOGICRETSTATE,
+				  MPU_MOD, PM_PWSTCTRL);
+	} else {
+		/* Block MPU retention */
+
+		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+		only_idle = 1;
+	}
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	omap2_sram_idle();
+
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+	}
+}
+
+static int omap2_can_sleep(void)
+{
+	if (omap2_fclks_active())
+		return 0;
+	if (osc_ck->usecount > 1)
+		return 0;
+	if (omap_dma_running())
+		return 0;
+
+	return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap2_can_sleep()) {
+		if (omap_irq_pending())
+			goto out;
+		omap2_enter_mpu_retention();
+		goto out;
+	}
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap2_enter_full_retention();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+	/* We cannot sleep in idle until we have resumed */
+	disable_hlt();
+	return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+	u32 wken_wkup, mir1;
+
+	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+	/* Mask GPT1 */
+	mir1 = omap_readl(0x480fe0a4);
+	omap_writel(1 << 5, 0x480fe0ac);
+
+	omap_uart_prepare_suspend();
+	omap2_enter_full_retention();
+
+	omap_writel(mir1, 0x480fe0a4);
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+	return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap2_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap2_pm_prepare,
+	.enter		= omap2_pm_enter,
+	.finish		= omap2_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+	int i, num_mem_banks;
+	struct powerdomain *pwrdm;
+
+	/* Enable autoidle */
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+			  OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+	/* Set all domain wakeup dependencies */
+	prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+	if (cpu_is_omap2430())
+		prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+	/*
+	 * Set CORE powerdomain memory banks to retain their contents
+	 * during RETENTION
+	 */
+	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+	for (i = 0; i < num_mem_banks; i++)
+		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+	/* Set CORE powerdomain's next power state to RETENTION */
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Force-power down DSP, GFX powerdomains */
+
+	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(dsp_clkdm);
+
+	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(gfx_clkdm);
+
+	/* Enable clockdomain hardware-supervised control for all clkdms */
+	clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+	/* Enable clock autoidle for all domains */
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+			 OMAP24XX_AUTO_MAILBOXES |
+			 OMAP24XX_AUTO_WDT4 |
+			 OMAP2420_AUTO_WDT3 |
+			 OMAP24XX_AUTO_MSPRO |
+			 OMAP2420_AUTO_MMC |
+			 OMAP24XX_AUTO_FAC |
+			 OMAP2420_AUTO_EAC |
+			 OMAP24XX_AUTO_HDQ |
+			 OMAP24XX_AUTO_UART2 |
+			 OMAP24XX_AUTO_UART1 |
+			 OMAP24XX_AUTO_I2C2 |
+			 OMAP24XX_AUTO_I2C1 |
+			 OMAP24XX_AUTO_MCSPI2 |
+			 OMAP24XX_AUTO_MCSPI1 |
+			 OMAP24XX_AUTO_MCBSP2 |
+			 OMAP24XX_AUTO_MCBSP1 |
+			 OMAP24XX_AUTO_GPT12 |
+			 OMAP24XX_AUTO_GPT11 |
+			 OMAP24XX_AUTO_GPT10 |
+			 OMAP24XX_AUTO_GPT9 |
+			 OMAP24XX_AUTO_GPT8 |
+			 OMAP24XX_AUTO_GPT7 |
+			 OMAP24XX_AUTO_GPT6 |
+			 OMAP24XX_AUTO_GPT5 |
+			 OMAP24XX_AUTO_GPT4 |
+			 OMAP24XX_AUTO_GPT3 |
+			 OMAP24XX_AUTO_GPT2 |
+			 OMAP2420_AUTO_VLYNQ |
+			 OMAP24XX_AUTO_DSS,
+			 CORE_MOD, CM_AUTOIDLE1);
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+			 OMAP24XX_AUTO_SSI |
+			 OMAP24XX_AUTO_USB,
+			 CORE_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+			 OMAP24XX_AUTO_GPMC |
+			 OMAP24XX_AUTO_SDMA,
+			 CORE_MOD, CM_AUTOIDLE3);
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+			 OMAP24XX_AUTO_AES |
+			 OMAP24XX_AUTO_RNG |
+			 OMAP24XX_AUTO_SHA |
+			 OMAP24XX_AUTO_DES,
+			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+	/* Put DPLL and both APLLs into autoidle mode */
+	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+			 PLL_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+			 OMAP24XX_AUTO_WDT1 |
+			 OMAP24XX_AUTO_MPU_WDT |
+			 OMAP24XX_AUTO_GPIOS |
+			 OMAP24XX_AUTO_32KSYNC |
+			 OMAP24XX_AUTO_GPT1,
+			 WKUP_MOD, CM_AUTOIDLE);
+
+	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+	 * stabilisation */
+	prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+	/* Configure automatic voltage transition */
+	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_VOLTSETUP_OFFSET);
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+			  OMAP24XX_MEMRETCTRL |
+			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+	/* Enable wake-up events */
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+			  WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+	u32 l;
+
+	if (!cpu_is_omap24xx())
+		return -ENODEV;
+
+	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+	/* Look up important powerdomains, clockdomains */
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (!mpu_pwrdm)
+		pr_err("PM: mpu_pwrdm not found\n");
+
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	if (!core_pwrdm)
+		pr_err("PM: core_pwrdm not found\n");
+
+	dsp_clkdm = clkdm_lookup("dsp_clkdm");
+	if (!dsp_clkdm)
+		pr_err("PM: mpu_clkdm not found\n");
+
+	gfx_clkdm = clkdm_lookup("gfx_clkdm");
+	if (!gfx_clkdm)
+		pr_err("PM: gfx_clkdm not found\n");
+
+
+	osc_ck = clk_get(NULL, "osc_ck");
+	if (IS_ERR(osc_ck)) {
+		printk(KERN_ERR "could not get osc_ck\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap242x()) {
+		emul_ck = clk_get(NULL, "emul_ck");
+		if (IS_ERR(emul_ck)) {
+			printk(KERN_ERR "could not get emul_ck\n");
+			clk_put(osc_ck);
+			return -ENODEV;
+		}
+	}
+
+	prcm_setup_regs();
+
+	/* Hack to prevent MPU retention when STI console is enabled. */
+	{
+		const struct omap_sti_console_config *sti;
+
+		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+				      struct omap_sti_console_config);
+		if (sti != NULL && sti->enable)
+			sti_console_enabled = 1;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+						 omap24xx_idle_loop_suspend_sz);
+
+		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+						    omap24xx_cpu_suspend_sz);
+	}
+
+	suspend_set_ops(&omap_pm_ops);
+	pm_idle = omap2_pm_idle;
+
+	return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 00000000000..841d4c5ed8b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+	u32 saved_state;
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 wkst, irqstatus_mpu;
+	u32 fclk, iclk;
+
+	/* WKUP */
+	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+	}
+
+	/* CORE */
+	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+	}
+	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	}
+
+	/* PER */
+	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+	}
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		/* USBHOST */
+		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+		if (wkst) {
+			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_ICLKEN);
+			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_FCLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_ICLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_FCLKEN);
+			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+					  PM_WKST);
+			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+						PM_WKST))
+				cpu_relax();
+			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_ICLKEN);
+			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_FCLKEN);
+		}
+	}
+
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+		cpu_relax();
+
+	return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+	/* Variable to tell what needs to be saved and restored
+	 * in omap_sram_idle*/
+	/* save_state = 0 => Nothing to save and restored */
+	/* save_state = 1 => Only L1 and logic lost */
+	/* save_state = 2 => Only L2 lost */
+	/* save_state = 3 => L1, L2 and logic lost */
+	int save_state = 0, mpu_next_state;
+
+	if (!_omap_sram_idle)
+		return;
+
+	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+	switch (mpu_next_state) {
+	case PWRDM_POWER_RET:
+		/* No need to save context */
+		save_state = 0;
+		break;
+	default:
+		/* Invalid state */
+		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		return;
+	}
+	omap2_gpio_prepare_for_retention();
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	_omap_sram_idle(NULL, save_state);
+	cpu_init();
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+	omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+	fck_core1 = cm_read_mod_reg(CORE_MOD,
+				    CM_FCLKEN1);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		fck_core3 = cm_read_mod_reg(CORE_MOD,
+					    OMAP3430ES2_CM_FCLKEN3);
+		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+					  CM_FCLKEN);
+		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					      CM_FCLKEN);
+	} else
+		fck_sgx = cm_read_mod_reg(GFX_MOD,
+					  OMAP3430ES2_CM_FCLKEN3);
+	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+				  CM_FCLKEN);
+	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+				  CM_FCLKEN);
+	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+				  CM_FCLKEN);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+	fck_per &= ~OMAP3430_EN_UART3;
+
+	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+	    fck_cam | fck_per | fck_usbhost)
+		return 1;
+	return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+	if (!omap_uart_can_sleep())
+		return 0;
+	if (omap3_fclks_active())
+		return 0;
+	return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+	}
+
+err:
+	return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap3_can_sleep())
+		goto out;
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap_sram_idle();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+	struct power_state *pwrst;
+	int state, ret = 0;
+
+	/* Read current next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node)
+		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+	/* Set ones wanted by suspend */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+			goto restore;
+		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+			goto restore;
+	}
+
+	omap_uart_prepare_suspend();
+	omap_sram_idle();
+
+restore:
+	/* Restore next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+		if (state > pwrst->next_state) {
+			printk(KERN_INFO "Powerdomain (%s) didn't enter "
+			       "target state %d\n",
+			       pwrst->pwrdm->name, pwrst->next_state);
+			ret = -1;
+		}
+	}
+	if (ret)
+		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+	else
+		printk(KERN_INFO "Successfully put all powerdomains "
+		       "to target state\n");
+
+	return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap3_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap3_pm_prepare,
+	.enter		= omap3_pm_enter,
+	.finish		= omap3_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ *                   retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle.  This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+	/* ensure IVA2 clock is disabled */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* if no clock activity, nothing else to do */
+	if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	      OMAP3430_CLKACTIVITY_IVA2_MASK))
+		return;
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Enable IVA2 clock */
+	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+			 OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Set IVA2 boot mode to 'idle' */
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+	/* Un-reset IVA2 */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Disable IVA2 clock */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+	u16 mask, padconf;
+
+	/* In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+	/* reset modem */
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+			  CORE_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+	/* XXX Reset all wkdeps. This should be done when initializing
+	 * powerdomains */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+		prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	} else
+		prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+	/*
+	 * Enable interface clock autoidle for all modules.
+	 * Note that in the long run this should be done by clockfw
+	 */
+	cm_write_mod_reg(
+		OMAP3430_AUTO_MODEM |
+		OMAP3430ES2_AUTO_MMC3 |
+		OMAP3430ES2_AUTO_ICR |
+		OMAP3430_AUTO_AES2 |
+		OMAP3430_AUTO_SHA12 |
+		OMAP3430_AUTO_DES2 |
+		OMAP3430_AUTO_MMC2 |
+		OMAP3430_AUTO_MMC1 |
+		OMAP3430_AUTO_MSPRO |
+		OMAP3430_AUTO_HDQ |
+		OMAP3430_AUTO_MCSPI4 |
+		OMAP3430_AUTO_MCSPI3 |
+		OMAP3430_AUTO_MCSPI2 |
+		OMAP3430_AUTO_MCSPI1 |
+		OMAP3430_AUTO_I2C3 |
+		OMAP3430_AUTO_I2C2 |
+		OMAP3430_AUTO_I2C1 |
+		OMAP3430_AUTO_UART2 |
+		OMAP3430_AUTO_UART1 |
+		OMAP3430_AUTO_GPT11 |
+		OMAP3430_AUTO_GPT10 |
+		OMAP3430_AUTO_MCBSP5 |
+		OMAP3430_AUTO_MCBSP1 |
+		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES |
+		OMAP3430_AUTO_OMAPCTRL |
+		OMAP3430ES1_AUTO_FSHOSTUSB |
+		OMAP3430_AUTO_HSOTGUSB |
+		OMAP3430_AUTO_SAD2D |
+		OMAP3430_AUTO_SSI,
+		CORE_MOD, CM_AUTOIDLE1);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_PKA |
+		OMAP3430_AUTO_AES1 |
+		OMAP3430_AUTO_RNG |
+		OMAP3430_AUTO_SHA11 |
+		OMAP3430_AUTO_DES1,
+		CORE_MOD, CM_AUTOIDLE2);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430_AUTO_MAD2D |
+			OMAP3430ES2_AUTO_USBTLL,
+			CORE_MOD, CM_AUTOIDLE3);
+	}
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_WDT2 |
+		OMAP3430_AUTO_WDT1 |
+		OMAP3430_AUTO_GPIO1 |
+		OMAP3430_AUTO_32KSYNC |
+		OMAP3430_AUTO_GPT12 |
+		OMAP3430_AUTO_GPT1 ,
+		WKUP_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_DSS,
+		OMAP3430_DSS_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_CAM,
+		OMAP3430_CAM_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_GPIO6 |
+		OMAP3430_AUTO_GPIO5 |
+		OMAP3430_AUTO_GPIO4 |
+		OMAP3430_AUTO_GPIO3 |
+		OMAP3430_AUTO_GPIO2 |
+		OMAP3430_AUTO_WDT3 |
+		OMAP3430_AUTO_UART3 |
+		OMAP3430_AUTO_GPT9 |
+		OMAP3430_AUTO_GPT8 |
+		OMAP3430_AUTO_GPT7 |
+		OMAP3430_AUTO_GPT6 |
+		OMAP3430_AUTO_GPT5 |
+		OMAP3430_AUTO_GPT4 |
+		OMAP3430_AUTO_GPT3 |
+		OMAP3430_AUTO_GPT2 |
+		OMAP3430_AUTO_MCBSP4 |
+		OMAP3430_AUTO_MCBSP3 |
+		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_PER_MOD,
+		CM_AUTOIDLE);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_USBHOST_MOD,
+			CM_AUTOIDLE);
+	}
+
+	/*
+	 * Set all plls to autoidle. This is needed until autoidle is
+	 * enabled by clockfw
+	 */
+	cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+			 MPU_MOD,
+			 CM_AUTOIDLE2);
+	cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+			 PLL_MOD,
+			 CM_AUTOIDLE);
+	cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+			 PLL_MOD,
+			 CM_AUTOIDLE2);
+
+	/*
+	 * Enable control of expternal oscillator through
+	 * sys_clkreq. In the long run clock framework should
+	 * take care of this.
+	 */
+	prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+			     OMAP3430_GR_MOD,
+			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	/* setup wakup source */
+	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+			  WKUP_MOD, PM_WKEN);
+	/* No need to write EN_IO, that is always enabled */
+	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+			  OMAP3430_EN_GPT12,
+			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	/* For some reason IO doesn't generate wakeup event even if
+	 * it is selected to mpu wakeup goup */
+	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	omap3_iva_idle();
+	omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_RET;
+	list_add(&pwrst->node, &pwrst_list);
+
+	if (pwrdm_has_hdwr_sar(pwrdm))
+		pwrdm_enable_hdwr_sar(pwrdm);
+
+	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		omap2_clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		omap2_clkdm_sleep(clkdm);
+	return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+	struct power_state *pwrst, *tmp;
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+	/* XXX prcm_setup_regs needs to be before enabling hw
+	 * supervised mode for powerdomains */
+	prcm_setup_regs();
+
+	ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+			  (irq_handler_t)prcm_interrupt_handler,
+			  IRQF_DISABLED, "prcm", NULL);
+	if (ret) {
+		printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+		       INT_34XX_PRCM_MPU_IRQ);
+		goto err1;
+	}
+
+	ret = pwrdm_for_each(pwrdms_setup);
+	if (ret) {
+		printk(KERN_ERR "Failed to setup powerdomains\n");
+		goto err2;
+	}
+
+	(void) clkdm_for_each(clkdms_setup);
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (mpu_pwrdm == NULL) {
+		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+		goto err2;
+	}
+
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					 omap34xx_cpu_suspend_sz);
+
+	suspend_set_ops(&omap_pm_ops);
+
+	pm_idle = omap3_pm_idle;
+
+err1:
+	return ret;
+err2:
+	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+		list_del(&pwrst->node);
+		kfree(pwrst);
+	}
+	return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50ee495..cb1ae84e092 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
 #define OMAP3430_EN_GPT1				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b806..9937e281469 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
  *
  */
 
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
  * Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
 
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
 
 #define OMAP3430_PM_IVAGRPSEL				0x00a8
 #define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
 
 #define OMAP3430_PM_PREPWSTST				0x00e8
 
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 00000000000..02e1c2d4705
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 00000000000..3751d293cb1
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060cb4b..2045441e838 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT		3
+#define SDRC_POWER_PWDENA_SHIFT			2
+#define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
 {
 	struct omap_sdrc_params *sp;
 
+	if (!sdrc_init_params)
+		return NULL;
+
 	sp = sdrc_init_params;
 
-	while (sp->rate != r)
+	while (sp->rate && sp->rate != r)
 		sp++;
 
 	if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 	omap2_sms_base = omap2_globals->sms;
 }
 
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
 void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 {
 	u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
 	sdrc_init_params = sp;
+
+	/* XXX Enable SRFRONIDLEREQ here also? */
+	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+		(1 << SDRC_POWER_PWDENA_SHIFT) |
+		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5ae9f..feaec7eaf6b 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
-	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	if (cpu_is_omap2420())
+		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+	else
+		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c285b..b094c15bfe4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
  * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
+ * Major rework for PM support by Kevin Hilman
+ *
  * Based off of arch/arm/mach-omap/omap1/serial.c
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -21,9 +26,50 @@
 
 #include <mach/common.h>
 #include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
 
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+	int num;
+	int can_sleep;
+	struct timer_list timer;
+	u32 timeout;
+
+	void __iomem *wk_st;
+	void __iomem *wk_en;
+	u32 wk_mask;
+	u32 padconf;
+
+	struct clk *ick;
+	struct clk *fck;
+	int clocked;
+
+	struct plat_serial8250_port *p;
+	struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+	int context_valid;
+
+	/* Registers to be saved/restored for OFF-mode */
+	u16 dll;
+	u16 dlh;
+	u16 ier;
+	u16 sysc;
+	u16 scr;
+	u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
+	struct plat_serial8250_port *p = uart->p;
+
 	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
 	serial_write_reg(p, UART_OMAP_SCR, 0x08);
 	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
 {
-	int i;
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		if (uart_ick[i] && uart_fck[i]) {
-			if (enable) {
-				clk_enable(uart_ick[i]);
-				clk_enable(uart_fck[i]);
-			} else {
-				clk_disable(uart_ick[i]);
-				clk_disable(uart_fck[i]);
+	u16 lcr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	lcr = serial_read_reg(p, UART_LCR);
+	serial_write_reg(p, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(p, UART_DLL);
+	uart->dlh = serial_read_reg(p, UART_DLM);
+	serial_write_reg(p, UART_LCR, lcr);
+	uart->ier = serial_read_reg(p, UART_IER);
+	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+	uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+	u16 efr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	if (!uart->context_valid)
+		return;
+
+	uart->context_valid = 0;
+
+	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(p, UART_EFR);
+	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, 0x0);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_DLL, uart->dll);
+	serial_write_reg(p, UART_DLM, uart->dlh);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, uart->ier);
+	serial_write_reg(p, UART_FCR, 0xA1);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_EFR, efr);
+	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(p, UART_OMAP_WER, uart->wer);
+	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+	if (uart->clocked)
+		return;
+
+	clk_enable(uart->ick);
+	clk_enable(uart->fck);
+	uart->clocked = 1;
+	omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_save_context(uart);
+	uart->clocked = 0;
+	clk_disable(uart->ick);
+	clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+					  int enable)
+{
+	struct plat_serial8250_port *p = uart->p;
+	u16 sysc;
+
+	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+	if (enable)
+		sysc |= 0x2 << 3;
+	else
+		sysc |= 0x1 << 3;
+
+	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+	omap_uart_enable_clocks(uart);
+
+	omap_uart_smart_idle_enable(uart, 0);
+	uart->can_sleep = 0;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_smart_idle_enable(uart, 1);
+	uart->can_sleep = 1;
+	del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+	struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+	omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num && uart->can_sleep) {
+			omap_uart_disable_clocks(uart);
+			return;
+		}
+	}
+}
+
+void omap_uart_resume_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num) {
+			omap_uart_enable_clocks(uart);
+
+			/* Check for IO pad wakeup */
+			if (cpu_is_omap34xx() && uart->padconf) {
+				u16 p = omap_ctrl_readw(uart->padconf);
+
+				if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+					omap_uart_block_sleep(uart);
 			}
+
+			/* Check for normal UART wakeup */
+			if (__raw_readl(uart->wk_st) & uart->wk_mask)
+				omap_uart_block_sleep(uart);
+
+			return;
 		}
 	}
 }
 
+void omap_uart_prepare_suspend(void)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		omap_uart_allow_sleep(uart);
+	}
+}
+
+int omap_uart_can_sleep(void)
+{
+	struct omap_uart_state *uart;
+	int can_sleep = 1;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (!uart->clocked)
+			continue;
+
+		if (!uart->can_sleep) {
+			can_sleep = 0;
+			continue;
+		}
+
+		/* This UART can now safely sleep. */
+		omap_uart_allow_sleep(uart);
+	}
+
+	return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred.  It does _nothing_ to handle the interrupt.  Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+	struct omap_uart_state *uart = dev_id;
+
+	omap_uart_block_sleep(uart);
+
+	return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+	u32 v;
+	struct plat_serial8250_port *p = uart->p;
+	int ret;
+
+	uart->can_sleep = 0;
+	uart->timeout = sleep_timeout;
+	setup_timer(&uart->timer, omap_uart_idle_timer,
+		    (unsigned long) uart);
+	mod_timer(&uart->timer, jiffies + uart->timeout);
+	omap_uart_smart_idle_enable(uart, 0);
+
+	if (cpu_is_omap34xx()) {
+		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 wk_mask = 0;
+		u32 padconf = 0;
+
+		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+		uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP3430_ST_UART1_MASK;
+			padconf = 0x182;
+			break;
+		case 1:
+			wk_mask = OMAP3430_ST_UART2_MASK;
+			padconf = 0x17a;
+			break;
+		case 2:
+			wk_mask = OMAP3430_ST_UART3_MASK;
+			padconf = 0x19e;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+		uart->padconf = padconf;
+	} else if (cpu_is_omap24xx()) {
+		u32 wk_mask = 0;
+
+		if (cpu_is_omap2430()) {
+			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		} else if (cpu_is_omap2420()) {
+			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		}
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP24XX_ST_UART1_MASK;
+			break;
+		case 1:
+			wk_mask = OMAP24XX_ST_UART2_MASK;
+			break;
+		case 2:
+			wk_mask = OMAP24XX_ST_UART3_MASK;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+	} else {
+		uart->wk_en = 0;
+		uart->wk_st = 0;
+		uart->wk_mask = 0;
+		uart->padconf = 0;
+	}
+
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v;
+
+		v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+
+	p->flags |= UPF_SHARE_IRQ;
+	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+			  "serial idle", (void *)uart);
+	WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	struct omap_uart_state *uart;
+	unsigned int value;
+
+	if (sscanf(buf, "%u", &value) != 1) {
+		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		return -EINVAL;
+	}
+	sleep_timeout = value * HZ;
+	list_for_each_entry(uart, &uart_list, node) {
+		uart->timeout = sleep_timeout;
+		if (uart->timeout)
+			mod_timer(&uart->timer, jiffies + uart->timeout);
+		else
+			/* A zero value means disable timeout feature */
+			omap_uart_block_sleep(uart);
+	}
+	return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
 void __init omap_serial_init(void)
 {
-	int i;
+	int i, err;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
+	if (cpu_is_omap44xx()) {
+		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+			serial_platform_data[i].irq += 32;
+	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct plat_serial8250_port *p = serial_platform_data + i;
+		struct omap_uart_state *uart = &omap_uart[i];
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
 		}
 
 		sprintf(name, "uart%d_ick", i+1);
-		uart_ick[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_ick[i])) {
+		uart->ick = clk_get(NULL, name);
+		if (IS_ERR(uart->ick)) {
 			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
-			uart_ick[i] = NULL;
-		} else
-			clk_enable(uart_ick[i]);
+			uart->ick = NULL;
+		}
 
 		sprintf(name, "uart%d_fck", i+1);
-		uart_fck[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_fck[i])) {
+		uart->fck = clk_get(NULL, name);
+		if (IS_ERR(uart->fck)) {
 			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
-			uart_fck[i] = NULL;
-		} else
-			clk_enable(uart_fck[i]);
+			uart->fck = NULL;
+		}
 
-		omap_serial_reset(p);
+		if (!uart->ick || !uart->fck)
+			continue;
+
+		uart->num = i;
+		p->private_data = uart;
+		uart->p = p;
+		list_add(&uart->node, &uart_list);
+
+		omap_uart_enable_clocks(uart);
+		omap_uart_reset(uart);
+		omap_uart_idle_init(uart);
 	}
-}
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
+	err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+	if (!err)
+		err = sysfs_create_file(&serial_device.dev.kobj,
+					&sleep_timeout_attr.attr);
+#endif
 
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
 }
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e96105e1..130aadbfa08 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
 
 #include <mach/omap24xx.h>
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 00000000000..e5e2553e79a
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
+				       * available */
+#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
+				OMAP343X_CONTROL_MEM_WKUP +\
+				SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+	.text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+        stmfd   sp!, {lr}     @ save registers on stack
+	adr	r0, restore
+        ldmfd   sp!, {pc}     @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+        .word   . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+loop:
+	/*b	loop*/	@Enable to debug by stepping through code
+	/* r0 contains restore pointer in sdram */
+	/* r1 contains information about saving context */
+	ldr     r4, sdrc_power          @ read the SDRC_POWER register
+	ldr     r5, [r4]                @ read the contents of SDRC_POWER
+	orr     r5, r5, #0x40           @ enable self refresh on idle req
+	str     r5, [r4]                @ write back to SDRC_POWER register
+
+	cmp	r1, #0x0
+	/* If context save is required, do that and execute wfi */
+	bne	save_context_wfi
+	/* Data memory barrier and Data sync barrier */
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c10, 4
+	mcr	p15, 0, r1, c7, c10, 5
+
+	wfi				@ wait for interrupt
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore:
+	/* b restore*/ 	@ Enable to debug restore code
+        /* Check what was the reason for mpu reset and store the reason in r9*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost - In this case, we wont be here */
+        /* 3 - Both L1 and L2 lost */
+	ldr     r1, pm_pwstctrl_mpu
+	ldr	r2, [r1]
+	and     r2, r2, #0x3
+	cmp     r2, #0x0	@ Check if target power state was OFF or RET
+        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
+	bne	logic_l1_restore
+	/* Execute smi to invalidate L2 cache */
+	mov r12, #0x1                         @ set up to invalide L2
+smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+logic_l1_restore:
+	mov	r1, #0
+	/* Invalidate all instruction caches to PoU
+	 * and flush branch target cache */
+	mcr	p15, 0, r1, c7, c5, 0
+
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldmia	r3!, {r4-r6}
+	mov	sp, r4
+	msr	spsr_cxsf, r5
+	mov	lr, r6
+
+	ldmia	r3!, {r4-r9}
+	/* Coprocessor access Control Register */
+	mcr p15, 0, r4, c1, c0, 2
+
+	/* TTBR0 */
+	MCR p15, 0, r5, c2, c0, 0
+	/* TTBR1 */
+	MCR p15, 0, r6, c2, c0, 1
+	/* Translation table base control register */
+	MCR p15, 0, r7, c2, c0, 2
+	/*domain access Control Register */
+	MCR p15, 0, r8, c3, c0, 0
+	/* data fault status Register */
+	MCR p15, 0, r9, c5, c0, 0
+
+	ldmia  r3!,{r4-r8}
+	/* instruction fault status Register */
+	MCR p15, 0, r4, c5, c0, 1
+	/*Data Auxiliary Fault Status Register */
+	MCR p15, 0, r5, c5, c1, 0
+	/*Instruction Auxiliary Fault Status Register*/
+	MCR p15, 0, r6, c5, c1, 1
+	/*Data Fault Address Register */
+	MCR p15, 0, r7, c6, c0, 0
+	/*Instruction Fault Address Register*/
+	MCR p15, 0, r8, c6, c0, 2
+	ldmia  r3!,{r4-r7}
+
+	/* user r/w thread and process ID */
+	MCR p15, 0, r4, c13, c0, 2
+	/* user ro thread and process ID */
+	MCR p15, 0, r5, c13, c0, 3
+	/*Privileged only thread and process ID */
+	MCR p15, 0, r6, c13, c0, 4
+	/* cache size selection */
+	MCR p15, 2, r7, c0, c0, 0
+	ldmia  r3!,{r4-r8}
+	/* Data TLB lockdown registers */
+	MCR p15, 0, r4, c10, c0, 0
+	/* Instruction TLB lockdown registers */
+	MCR p15, 0, r5, c10, c0, 1
+	/* Secure or Nonsecure Vector Base Address */
+	MCR p15, 0, r6, c12, c0, 0
+	/* FCSE PID */
+	MCR p15, 0, r7, c13, c0, 0
+	/* Context PID */
+	MCR p15, 0, r8, c13, c0, 1
+
+	ldmia  r3!,{r4-r5}
+	/* primary memory remap register */
+	MCR p15, 0, r4, c10, c2, 0
+	/*normal memory remap register */
+	MCR p15, 0, r5, c10, c2, 1
+
+	/* Restore cpsr */
+	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
+	msr	cpsr, r4	/*store cpsr */
+
+	/* Enabling MMU here */
+	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	and	r7, #0x7
+	cmp	r7, #0x0
+	beq	usettbr0
+ttbr_error:
+	/* More work needs to be done to support N[0:2] value other than 0
+	* So looping here so that the error can be detected
+	*/
+	b	ttbr_error
+usettbr0:
+	mrc	p15, 0, r2, c2, c0, 0
+	ldr	r5, ttbrbit_mask
+	and	r2, r5
+	mov	r4, pc
+	ldr	r5, table_index_mask
+	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	/* Extract the value to be written to table entry */
+	ldr	r1, table_entry
+	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* Getting the address of table entry to modify */
+	lsr	r4, #18
+	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* Storing previous entry of location being modified */
+	ldr	r5, scratchpad_base
+	ldr	r4, [r2]
+	str	r4, [r5, #0xC0]
+	/* Modify the table entry */
+	str	r1, [r2]
+	/* Storing address of entry being modified
+	 * - will be restored after enabling MMU */
+	ldr	r5, scratchpad_base
+	str	r2, [r5, #0xC4]
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
+	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
+	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
+	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
+	/* Restore control register  but dont enable caches here*/
+	/* Caches will be enabled after restoring MMU table entry */
+	ldmia	r3!, {r4}
+	/* Store previous value of control register in scratchpad */
+	str	r4, [r5, #0xC8]
+	ldr	r2, cache_pred_disable_mask
+	and	r4, r2
+	mcr	p15, 0, r4, c1, c0, 0
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+save_context_wfi:
+	/*b	save_context_wfi*/	@ enable to debug save code
+	mov	r8, r0 /* Store SDRAM address in r8 */
+        /* Check what that target sleep state is:stored in r1*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost */
+        /* 3 - Both L1 and L2 lost */
+	cmp	r1, #0x2 /* Only L2 lost */
+	beq	clean_l2
+	cmp	r1, #0x1 /* L2 retained */
+	/* r9 stores whether to clean L2 or not*/
+	moveq	r9, #0x0 /* Dont Clean L2 */
+	movne	r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/* Domain access control register, data fault status register,
+	and instruction fault status register */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Data aux fault status register, instruction aux fault status,
+	datat fault address register and instruction fault address register*/
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/* user r/w thread and process ID, user r/o thread and process ID,
+	priv only thread and process ID, cache size selection */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+clean_caches:
+	/* Clean Data or unified cache to POU*/
+	/* How to invalidate only L1 cache???? - #FIX_ME# */
+	/* mcr	p15, 0, r11, c7, c11, 1 */
+	cmp	r9, #1 /* Check whether L2 inval is required or not*/
+	bne	skip_l2_inval
+clean_l2:
+	/* read clidr */
+	mrc     p15, 1, r0, c0, c0, 1
+	/* extract loc from clidr */
+	ands    r3, r0, #0x7000000
+	/* left align loc bit field */
+	mov     r3, r3, lsr #23
+	/* if loc is 0, then no need to clean */
+	beq     finished
+	/* start clean at cache level 0 */
+	mov     r10, #0
+loop1:
+	/* work out 3x current cache level */
+	add     r2, r10, r10, lsr #1
+	/* extract cache type bits from clidr*/
+	mov     r1, r0, lsr r2
+	/* mask of the bits for current cache only */
+	and     r1, r1, #7
+	/* see what cache we have at this level */
+	cmp     r1, #2
+	/* skip if no cache, or just i-cache */
+	blt     skip
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	/* isb to sych the new cssr&csidr */
+	isb
+	/* read the new csidr */
+	mrc     p15, 1, r1, c0, c0, 0
+	/* extract the length of the cache lines */
+	and     r2, r1, #7
+	/* add 4 (line length offset) */
+	add     r2, r2, #4
+	ldr     r4, assoc_mask
+	/* find maximum number on the way size */
+	ands    r4, r4, r1, lsr #3
+	/* find bit position of way size increment */
+	clz     r5, r4
+	ldr     r7, numset_mask
+	/* extract max number of the index size*/
+	ands    r7, r7, r1, lsr #13
+loop2:
+	mov     r9, r4
+	/* create working copy of max way size*/
+loop3:
+	/* factor way and cache number into r11 */
+	orr     r11, r10, r9, lsl r5
+	/* factor index number into r11 */
+	orr     r11, r11, r7, lsl r2
+	/*clean & invalidate by set/way */
+	mcr     p15, 0, r11, c7, c10, 2
+	/* decrement the way*/
+	subs    r9, r9, #1
+	bge     loop3
+	/*decrement the index */
+	subs    r7, r7, #1
+	bge     loop2
+skip:
+	add     r10, r10, #2
+	/* increment cache number */
+	cmp     r3, r10
+	bgt     loop1
+finished:
+	/*swith back to cache level 0 */
+	mov     r10, #0
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	isb
+skip_l2_inval:
+	/* Data memory barrier and Data sync barrier */
+	mov     r1, #0
+	mcr     p15, 0, r1, c7, c10, 4
+	mcr     p15, 0, r1, c7, c10, 5
+
+	wfi                             @ wait for interrupt
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+	/* restore regs and return */
+	ldmfd   sp!, {r0-r12, pc}
+
+i_dll_wait:
+	ldr     r4, clk_stabilize_delay
+
+i_dll_delay:
+	subs    r4, r4, #0x1
+	bne     i_dll_delay
+	ldr     r4, sdrc_power
+	ldr     r5, [r4]
+	bic     r5, r5, #0x40
+	str     r5, [r4]
+	bx	lr
+pm_prepwstst_core:
+	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+	.word	PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sdrc_power:
+	.word SDRC_POWER_V
+context_mem:
+	.word	0x803E3E14
+clk_stabilize_delay:
+	.word 0x000001FF
+assoc_mask:
+	.word	0x3ff
+numset_mask:
+	.word	0x7fff
+ttbrbit_mask:
+	.word	0xFFFFC000
+table_index_mask:
+	.word	0xFFF00000
+table_entry:
+	.word	0x00000C02
+cache_pred_disable_mask:
+	.word	0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd349022..bb299851116 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
 omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap242x_sdi_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
 omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap242x_srs_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap242x_ssp_set_config:
-	.word OMAP242X_PRCM_CLKCFG_CTRL
+	.word OMAP2420_PRCM_CLKCFG_CTRL
 omap242x_ssp_pll_ctl:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e269e8..9955abcaeb3 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
 omap243x_sdi_sdrc_dlla_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap243x_sdi_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
 omap243x_srs_sdrc_rfr_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap243x_srs_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap243x_ssp_set_config:
-	.word OMAP243X_PRCM_CLKCFG_CTRL
+	.word OMAP2430_PRCM_CLKCFG_CTRL
 omap243x_ssp_pll_ctl:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c714613634..c080c82521e 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
 /*
  * Change frequency of core dpll
  * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ *      SDRC rates < 83MHz
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	ldr	r4, [sp, #52]		@ pull extra args off the stack
+	dsb				@ flush buffered writes to interconnect
 	cmp	r3, #0x2
 	blne	configure_sdrc
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	unlock_dll
 	blne	lock_dll
-	cmp	r3, #0x1
-	blne	unlock_dll
 	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
 	bl 	configure_core_dpll
 	bl	enable_sdrc
-	cmp	r3, #0x1
-	blne	wait_dll_unlock
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	wait_dll_unlock
 	blne	wait_dll_lock
 	cmp	r3, #0x1
 	blne	configure_sdrc
+	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
 unlock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	orr	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	orr	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	bic	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	bic	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
-	mov	r5, #0x0		@ Move 0 to R5
-	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
-	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r5, [r4]		@ read the contents of SDRC_POWER
-	orr 	r5, r5, #0x40		@ enable self refresh on idle req
-	str 	r5, [r4]		@ write back to SDRC_POWER register
-	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r5, [r4]
-	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
-	str 	r5, [r4]
+	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r12, [r11]		@ read the contents of SDRC_POWER
+	mov	r9, r12			@ keep a copy of SDRC_POWER bits
+	orr 	r12, r12, #0x40		@ enable self refresh on idle req
+	bic 	r12, r12, #0x4		@ clear PWDENA
+	str 	r12, [r11]		@ write back to SDRC_POWER register
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
+	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r12, [r11]
+	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr 	r5, [r4]
-	and 	r5, r5, #0x2		@ check for SDRC idle
-	cmp 	r5, #2
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr 	r12, [r11]
+	and 	r12, r12, #0x2		@ check for SDRC idle
+	cmp 	r12, #2
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
-	ldr 	r4, omap3_cm_clksel1_pll
-	ldr	r5, [r4]
-	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
-	and	r5, r5, r6
-	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
-	str	r5, [r4]
-	mov 	r5, #0x800		@ wait for the clock to stabilise
+	ldr 	r11, omap3_cm_clksel1_pll
+	ldr	r12, [r11]
+	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
+	and	r12, r12, r10
+	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r12, [r11]
+	ldr	r12, [r11]		@ posted-write barrier for CM
+	mov 	r12, #0x800		@ wait for the clock to stabilise
 	cmp	r3, #2
 	bne	wait_clk_stable
 	bx	lr
 wait_clk_stable:
-	subs 	r5, r5, #1
+	subs 	r12, r12, #1
 	bne	wait_clk_stable
 	nop
 	nop
@@ -116,42 +121,42 @@ wait_clk_stable:
 	nop
 	bx	lr
 enable_sdrc:
-	ldr 	r4, omap3_cm_iclken1_core
-	ldr	r5, [r4]
-	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
-	str 	r5, [r4]
+	ldr 	r11, omap3_cm_iclken1_core
+	ldr	r12, [r11]
+	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle1:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr	r5, [r4]
-	and 	r5, r5, #0x2
-	cmp	r5, #0
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr	r12, [r11]
+	and 	r12, r12, #0x2
+	cmp	r12, #0
 	bne	wait_sdrc_idle1
-	ldr	r4, omap3_sdrc_power
-	ldr	r5, [r4]
-	bic 	r5, r5, #0x40
-	str 	r5, [r4]
+restore_sdrc_power_val:
+	ldr	r11, omap3_sdrc_power
+	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
 	bx	lr
 wait_dll_lock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and 	r5, r5, #0x4
-	cmp	r5, #0x4
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and 	r12, r12, #0x4
+	cmp	r12, #0x4
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x0
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and	r12, r12, #0x4
+	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r4, omap3_sdrc_rfr_ctrl
-	str	r0, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrla
-	str	r1, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrlb
-	str	r2, [r4]
+	ldr	r11, omap3_sdrc_rfr_ctrl
+	str	r0, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrla
+	str	r1, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrlb
+	str	r2, [r11]
+	ldr	r2, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090..97eeeebcb06 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
  *
  * Some parts based off of TI's 24xx code:
  *
- *   Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
  *
  * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
@@ -37,6 +38,7 @@
 
 #include <asm/mach/time.h>
 #include <mach/dmtimer.h>
+#include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
@@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
-
+		if (cpu_is_omap44xx())
+			period = 0xff;	/* FIXME: */
 		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void)
 		     "timer-gp: omap_dm_timer_set_source() failed\n");
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+	if (cpu_is_omap44xx())
+		/* Assuming 32kHz clk is driving GPT1 */
+		tick_rate = 32768;	/* FIXME: */
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
 		gptimer_id, tick_rate);
@@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void)
 
 static void __init omap2_gp_timer_init(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
 	omap_dm_timer_init();
 
 	omap2_gp_clockevent_init();
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
new file mode 100644
index 00000000000..c1a650a9910
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -0,0 +1,34 @@
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = INT_44XX_LOCALTIMER_IRQ;
+	twd_timer_setup(evt);
+}
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a136ef..d85296dc896 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
 
+#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+	/* Ensure force-idle mode for OTG controller */
+	if (cpu_is_omap34xx())
+		omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
 		.flags	= IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
+
+	usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+	usb_musb_pm_init();
 }
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index c14d1213727..6f3f77d031d 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
+#include <linux/errno.h>
 #include <mach/hardware.h>
 #include "common.h"
 
@@ -44,6 +45,7 @@
 #define TARGET_DEV_BUS		1
 #define TARGET_PCI		3
 #define TARGET_PCIE		4
+#define TARGET_SRAM		9
 #define ATTR_PCIE_MEM		0x59
 #define ATTR_PCIE_IO		0x51
 #define ATTR_PCIE_WA		0x79
@@ -53,6 +55,7 @@
 #define ATTR_DEV_CS1		0x1d
 #define ATTR_DEV_CS2		0x1b
 #define ATTR_DEV_BOOT		0xf
+#define ATTR_SRAM		0x0
 
 /*
  * Helpers to get DDR bank info
@@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	return 0;
 }
 
-static void __init setup_cpu_win(int win, u32 base, u32 size,
+static int __init setup_cpu_win(int win, u32 base, u32 size,
 				 u8 target, u8 attr, int remap)
 {
 	if (win >= 8) {
 		printk(KERN_ERR "setup_cpu_win: trying to allocate "
 				"window %d\n", win);
-		return;
+		return -ENOSPC;
 	}
 
 	writel(base & 0xffff0000, CPU_WIN_BASE(win));
@@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size,
 		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
 		writel(0, CPU_WIN_REMAP_HI(win));
 	}
+	return 0;
 }
 
 void __init orion5x_setup_cpu_mbus_bridge(void)
@@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 	setup_cpu_win(win_alloc_count++, base, size,
 		      TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
+
+int __init orion5x_setup_sram_win(void)
+{
+	return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+			ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b1c7778d9f9..eafcc49009e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -31,7 +31,7 @@
 #include <plat/ehci-orion.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -536,16 +536,52 @@ void __init orion5x_xor_init(void)
 	platform_device_register(&orion5x_xor1_channel);
 }
 
+static struct resource orion5x_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = ORION5X_CRYPTO_PHYS_BASE,
+		.end    = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = ORION5X_SRAM_PHYS_BASE,
+		.end    = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_ORION5X_CESA,
+		.end    = IRQ_ORION5X_CESA,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(orion5x_crypto_res),
+	.resource       = orion5x_crypto_res,
+};
+
+int __init orion5x_crypto_init(void)
+{
+	int ret;
+
+	ret = orion5x_setup_sram_win();
+	if (ret)
+		return ret;
+
+	return platform_device_register(&orion5x_crypto_device);
+}
 
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+static struct orion_wdt_platform_data orion5x_wdt_data = {
 	.tclk			= 0,
 };
 
 static struct platform_device orion5x_wdt_device = {
-	.name		= "orion5x_wdt",
+	.name		= "orion_wdt",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &orion5x_wdt_data,
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 798b9a5e3da..de483e83edd 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
 void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+int orion5x_setup_sram_win(void);
 
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
@@ -37,6 +38,7 @@ void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
+int orion5x_crypto_init(void);
 
 /*
  * PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index be896e59d3e..5c9744cd8ef 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -17,8 +17,8 @@
 
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
 
-#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET		0x0002
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET_OUT_EN	0x0002
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
 
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 377a773ae53..2d876657053 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -24,6 +24,7 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f2100000	PCI I/O space
+ * f2200000	SRAM dedicated for the crypto unit
  * f4000000	device bus mappings (boot)
  * fa000000	device bus mappings (cs0)
  * fa800000	device bus mappings (cs2)
@@ -49,6 +50,9 @@
 #define ORION5X_PCI_IO_BUS_BASE		0x00100000
 #define ORION5X_PCI_IO_SIZE		SZ_1M
 
+#define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
+#define ORION5X_SRAM_SIZE		SZ_8K
+
 /* Relevant only for Orion-1/Orion-NAS */
 #define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
 #define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
@@ -94,6 +98,8 @@
 #define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
 #define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
 
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
+
 #define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
 #define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
 
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index e912490fff2..60e734c1045 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
 	/*
 	 * Enable and issue soft reset
 	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
 }
 
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index e23a3f91d6c..bc4c3b9aaf8 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
 	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	while (mode->mpp >= 0) {
 		u32 *reg;
 		int num_type;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 41e6d5033d5..61c086b6672 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -181,9 +181,9 @@ static void mss2_power_off(void)
 	/*
 	 * Enable and issue soft reset
 	 */
-	reg = readl(CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
 	reg |= 1 << 2;
-	writel(reg, CPU_RESET_MASK);
+	writel(reg, RSTOUTn_MASK);
 
 	reg = readl(CPU_SOFT_RESET);
 	reg |= 1;
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0f9cdf45895..37b3d487529 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -25,6 +25,7 @@ struct fpga_devices {
 	/* Technologic Systems */
 	struct fpga_device 	ts_rtc;
 	struct fpga_device 	ts_nand;
+	struct fpga_device 	ts_rng;
 };
 
 struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 9a6b397f972..5041d1bc26b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -17,6 +17,7 @@
 #include <linux/m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/timeriomem-rng.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void)
 }
 
 /*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= TS_RNG_DATA,
+	.end		= TS_RNG_DATA + 4 - 1,
+};
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+	.period		= 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+	.name		= "timeriomem_rng",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_rng_data,
+	},
+	.resource	= &ts78xx_ts_rng_resource,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_rng.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_rng_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_rng.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_rng_device);
+
+	return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rng_device);
+}
+
+/*****************************************************************************
  * FPGA 'hotplug' support code
  ****************************************************************************/
 static void ts78xx_fpga_devices_zero_init(void)
 {
 	ts78xx_fpga.supports.ts_rtc.init = 0;
 	ts78xx_fpga.supports.ts_nand.init = 0;
+	ts78xx_fpga.supports.ts_rng.init = 0;
 }
 
 static void ts78xx_fpga_supports(void)
@@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void)
 	case TS7800_REV_5:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
+		ts78xx_fpga.supports.ts_rng.present = 1;
 		break;
 	default:
 		ts78xx_fpga.supports.ts_rtc.present = 0;
 		ts78xx_fpga.supports.ts_nand.present = 0;
+		ts78xx_fpga.supports.ts_rng.present = 0;
 	}
 }
 
@@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void)
 		}
 		ret |= tmp;
 	}
+	if (ts78xx_fpga.supports.ts_rng.present == 1) {
+		tmp = ts78xx_ts_rng_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		}
+		ret |= tmp;
+	}
 
 	return ret;
 }
@@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void)
 		ts78xx_ts_rtc_unload();
 	if (ts78xx_fpga.supports.ts_nand.present == 1)
 		ts78xx_ts_nand_unload();
+	if (ts78xx_fpga.supports.ts_rng.present == 1)
+		ts78xx_ts_rng_unload();
 
 	return ret;
 }
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 7ddc22c2bb5..69208217b22 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+	.port_names[0] = "lan3",
+	.port_names[1] = "lan4",
+	.port_names[2] = "wan",
+	.port_names[3] = "cpu",
+	.port_names[5] = "lan1",
+	.port_names[7] = "lan2",
+};
+
+static struct dsa_platform_data wnr854t_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &wnr854t_switch_chip_data,
+};
+
 static void __init wnr854t_init(void)
 {
 	/*
@@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
+	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd368a..f4533f8ff4e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -88,6 +94,10 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
@@ -280,6 +290,7 @@ config MACH_ZYLONITE
 	select PXA3xx
 	select PXA_SSP
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -308,6 +319,14 @@ config MACH_CM_X300
 	select PXA3xx
 	select CPU_PXA300
 
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -505,12 +524,6 @@ config PXA_SSP
 	help
 	  Enable support for PXA2xx SSP ports
 
-config PXA_PWM
-	tristate
-	default BACKLIGHT_PWM
-	help
-	  Enable support for PXA2xx/PXA3xx PWM controllers
-
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4e14b..d18ffef44b8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,6 @@ endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
-obj-$(CONFIG_PXA_PWM)		+= pwm.o
 
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index db52d2c4791..49ae3829231 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num)
 	for (i = 0; i < num; i++)
 		clkdev_add(&clks[i]);
 }
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-	struct device *dev)
-{
-	struct clk *r = clk_get(dev, id);
-	struct clk_lookup *l;
-
-	if (!r)
-		return -ENODEV;
-
-	l = clkdev_alloc(r, alias, alias_dev_name);
-	clk_put(r);
-	if (!l)
-		return -ENODEV;
-	clkdev_add(l);
-	return 0;
-}
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 34576ba5f5f..1d2cec25391 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -335,6 +335,10 @@ void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	cmx270_init_rtc();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index a9f48b1cb54..465da26591b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -21,18 +21,20 @@
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
+#include <linux/rtc-v3020.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/setup.h>
 
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa3xx_nand.h>
 
 #include <asm/mach/map.h>
@@ -46,6 +48,11 @@
 
 #define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
 
+#define GPIO95_RTC_CS		(95)
+#define GPIO96_RTC_WR		(96)
+#define GPIO97_RTC_RD		(97)
+#define GPIO98_RTC_IO		(98)
+
 static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
+	/* RTC GPIOs */
+	GPIO95_GPIO,			/* RTC CS */
+	GPIO96_GPIO,			/* RTC WR */
+	GPIO97_GPIO,			/* RTC RD */
+	GPIO98_GPIO,			/* RTC IO */
+
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
@@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
 	.enable_arbiter	= 1,
+	.keep_config	= 1,
 	.parts		= cm_x300_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
@@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void)
 static inline void cm_x300_init_i2c(void) {}
 #endif
 
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+	.use_gpio	= 1,
+	.gpio_cs	= GPIO95_RTC_CS,
+	.gpio_wr	= GPIO96_RTC_WR,
+	.gpio_rd	= GPIO97_RTC_RD,
+	.gpio_io	= GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+	.name		= "v3020",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_v3020_pdata,
+	}
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+	platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
 static void __init cm_x300_init(void)
 {
 	/* board-processor specific GPIO initialization */
@@ -453,6 +492,19 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_rtc();
+}
+
+static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (64*1024*1024);
+	mi->bank[1].start = 0xc0000000;
+	mi->bank[1].node = 0;
+	mi->bank[1].size = (64*1024*1024);
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
@@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
+	.fixup		= cm_x300_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 930e364ccde..962dda2e154 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -42,7 +42,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = {
 	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
-static void corgi_ads7846_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.cs_control	= corgi_ads7846_cs,
+	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
 };
 
 static void corgi_bl_kick_battery(void)
@@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
-static void corgi_lcdcon_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.cs_control	= corgi_lcdcon_cs,
+	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
 };
 
-static void corgi_max1111_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.cs_control	= corgi_max1111_cs,
+	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info corgi_spi_devices[] = {
@@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = {
 
 static void __init corgi_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
-	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
-	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
-
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-	return;
-
-err_free_2:
-	gpio_free(CORGI_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(CORGI_GPIO_ADS7846_CS);
 }
 #else
 static inline void corgi_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7f04b3a761d..a093282fe4d 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -41,7 +41,6 @@ static void corgi_charger_init(void)
 	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void corgi_measure_temp(int on)
@@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type)
 
 static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.init            = corgi_charger_init,
-	.exit            = sharpsl_pm_pxa_remove,
+	.exit            = NULL,
 	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
 	.gpio_acin       = CORGI_GPIO_AC_IN,
 	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 083a1d851d4..3a8ee2272ad 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -36,6 +36,8 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/pxa2xx-regs.h>
 
@@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #define freq_debug  0
 #endif
 
+static struct regulator *vcc_core;
+
 static unsigned int pxa27x_maxfreq;
 module_param(pxa27x_maxfreq, uint, 0);
 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
@@ -58,6 +62,8 @@ typedef struct {
 	unsigned int cccr;
 	unsigned int div2;
 	unsigned int cclkcfg;
+	int vmin;
+	int vmax;
 } pxa_freqs_t;
 
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
@@ -82,24 +88,24 @@ static unsigned int sdram_rows;
 
 static pxa_freqs_t pxa255_run_freqs[] =
 {
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
 };
 
 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
 static pxa_freqs_t pxa255_turbo_freqs[] =
 {
 	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
 };
 
 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
    ((T)  ? CCLKCFG_TURBO : 0))
 
 static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
 };
 
 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -163,6 +169,47 @@ static struct cpufreq_frequency_table
 
 extern unsigned get_clk_frequency_khz(int info);
 
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	int ret = 0;
+	int vmin, vmax;
+
+	if (!cpu_is_pxa27x())
+		return 0;
+
+	vmin = pxa_freq->vmin;
+	vmax = pxa_freq->vmax;
+	if ((vmin == -1) || (vmax == -1))
+		return 0;
+
+	ret = regulator_set_voltage(vcc_core, vmin, vmax);
+	if (ret)
+		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
+		       vmin, vmax);
+	return ret;
+}
+
+static __init void pxa_cpufreq_init_voltages(void)
+{
+	vcc_core = regulator_get(NULL, "vcc_core");
+	if (IS_ERR(vcc_core)) {
+		pr_info("cpufreq: Didn't find vcc_core regulator\n");
+		vcc_core = NULL;
+	} else {
+		pr_info("cpufreq: Found vcc_core regulator\n");
+	}
+}
+#else
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	return 0;
+}
+
+static __init void pxa_cpufreq_init_voltages(void) { }
+#endif
+
 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
 			     pxa_freqs_t **pxa_freqs)
 {
@@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	unsigned long flags;
 	unsigned int new_freq_cpu, new_freq_mem;
 	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+	int ret = 0;
 
 	/* Get the current policy */
 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
@@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
+	if (vcc_core && freqs.new > freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+	if (ret)
+		return ret;
 	/*
 	 * Tell everyone what we're about to do...
 	 * you should add a notify client with any platform specific
@@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 */
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
+	/*
+	 * Even if voltage setting fails, we don't report it, as the frequency
+	 * change succeeded. The voltage reduction is not a critical failure,
+	 * only power savings will suffer from this.
+	 *
+	 * Note: if the voltage change fails, and a return value is returned, a
+	 * bug is triggered (seems a deadlock). Should anybody find out where,
+	 * the "return 0" should become a "return ret".
+	 */
+	if (vcc_core && freqs.new < freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
 	return 0;
 }
 
@@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	if (cpu_is_pxa27x())
 		pxa27x_guess_max_freq();
 
+	pxa_cpufreq_init_voltages();
+
 	init_sdram_rows();
 
 	/* set default policy and cpuinfo */
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 2b289f83a61..7d3e1b46e55 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -16,15 +16,17 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/sm501.h>
+#include <linux/smsc911x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = {
 	{
 		.start	= CSB726_IRQ_LAN,
 		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
+struct smsc911x_platform_config csb726_lan_config = {
+	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+
 static struct platform_device csb726_lan = {
-	.name		= "smc911x",
+	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
 	.resource	= csb726_lan_resources,
+	.dev		= {
+		.platform_data	= &csb726_lan_config,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -303,6 +316,7 @@ static void __init csb726_init(void)
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
 	pxa_set_ohci_info(&csb726_ohci_platform_data);
+	pxa_set_ac97_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 29970f703f3..ecc08f360b6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,7 +8,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
@@ -290,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = {
 };
 
 struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
+	.name		= "pxa3xx-pwri2c",
 	.id		= 1,
 	.resource	= pxa3xx_resources_i2c_power,
 	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73fbd4c..243e0802b5f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <media/soc_camera.h>
 
@@ -41,7 +43,7 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
 
@@ -52,23 +54,31 @@
 #define GPIO13_MMC_CD		(13)
 #define GPIO95_MMC_WP		(95)
 #define GPIO56_NAND_RB		(56)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO16_USB_HUB_RESET	(16)
 
 /* eXeda specific GPIOs */
 #define GPIO114_MMC_CD		(114)
 #define GPIO20_NAND_RB		(20)
 #define GPIO38_SD_PWEN		(38)
+#define GPIO37_WLAN_RST		(37)
+#define GPIO95_TOUCHPAD_INT	(95)
+#define GPIO130_CAM_RESET	(130)
+#define GPIO10_USB_HUB_RESET	(10)
 
 /* common  GPIOs */
 #define GPIO11_NAND_CS		(11)
-#define GPIO93_CAM_RESET	(93)
 #define GPIO41_ETHIRQ		(41)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN	(115)
 #define GPIO19_WLAN_STRAP	(19)
+#define GPIO9_USB_VBUS_EN	(9)
 
 static int mmc_cd;
 static int nand_rb;
 static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
 
 static unsigned long common_pin_config[] = {
 	/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
-	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
 };
 
 static unsigned long em_x270_pin_config[] = {
-	GPIO13_GPIO,	/* MMC card detect */
-	GPIO56_GPIO,	/* NAND Ready/Busy */
-	GPIO95_GPIO,	/* MMC Write protect */
+	GPIO13_GPIO,				/* MMC card detect */
+	GPIO16_GPIO,				/* USB hub reset */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
+	GPIO95_GPIO,				/* MMC Write protect */
 };
 
 static unsigned long exeda_pin_config[] = {
+	GPIO10_GPIO,				/* USB hub reset */
 	GPIO20_GPIO,				/* NAND Ready/Busy */
 	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO95_GPIO,				/* touchpad IRQ */
 	GPIO114_GPIO,				/* MMC card detect */
 };
 
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
 
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+	int err;
+
+	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+	if (IS_ERR(em_x270_usb_ldo))
+		return PTR_ERR(em_x270_usb_ldo);
+
+	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+	if (err)
+		goto err_free_usb_ldo;
+
+	err = gpio_request(usb_hub_reset, "hub rst");
+	if (err)
+		goto err_free_vbus_gpio;
+
+	/* USB Hub power-on and reset */
+	gpio_direction_output(usb_hub_reset, 0);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+	gpio_set_value(usb_hub_reset, 0);
+	regulator_disable(em_x270_usb_ldo);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+
+	/* enable VBUS */
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+	return 0;
+
+err_free_vbus_gpio:
+	gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+	regulator_put(em_x270_usb_ldo);
+
+	return err;
+}
+
 static int em_x270_ohci_init(struct device *dev)
 {
+	int err;
+
+	/* we don't want to entirely disable USB if the HUB init failed */
+	err = em_x270_usb_hub_init();
+	if (err)
+		pr_err("USB Hub initialization failed: %d\n", err);
+
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
 	return 0;
 }
 
+static void em_x270_ohci_exit(struct device *dev)
+{
+	gpio_free(usb_hub_reset);
+	gpio_free(GPIO9_USB_VBUS_EN);
+
+	if (!IS_ERR(em_x270_usb_ldo)) {
+		if (regulator_is_enabled(em_x270_usb_ldo))
+			regulator_disable(em_x270_usb_ldo);
+
+		regulator_put(em_x270_usb_ldo);
+	}
+}
+
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
+	.exit		= em_x270_ohci_exit,
 };
 
 static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
 	if (err)
 		return err;
 
+	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		goto err_free_pwen;
+
+	if (machine_is_exeda()) {
+		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+		if (err)
+			goto err_free_strap;
+
+		gpio_direction_output(GPIO37_WLAN_RST, 1);
+		msleep(100);
+	}
+
 	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	mdelay(100);
+	msleep(100);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
 
 	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
-	mdelay(100);
+	msleep(100);
 	gpio_set_value(GPIO115_WLAN_PWEN, 1);
-	mdelay(100);
+	msleep(100);
 
 	spi->bits_per_word = 16;
 	spi_setup(spi);
 
 	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+	gpio_free(GPIO115_WLAN_PWEN);
+
+	return err;
 }
 
 static int em_x270_libertas_teardown(struct spi_device *spi)
 {
 	gpio_set_value(GPIO115_WLAN_PWEN, 0);
 	gpio_free(GPIO115_WLAN_PWEN);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	if (machine_is_exeda()) {
+		gpio_set_value(GPIO37_WLAN_RST, 0);
+		gpio_free(GPIO37_WLAN_RST);
+	}
 
 	return 0;
 }
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	ret = gpio_request(cam_reset, "camera reset");
 	if (ret)
 		return ret;
 
-	gpio_direction_output(GPIO93_CAM_RESET, 0);
+	gpio_direction_output(cam_reset, 0);
 
 	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
 	if (em_x270_camera_ldo == NULL) {
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return -ENODEV;
 	}
 
 	ret = regulator_enable(em_x270_camera_ldo);
 	if (ret) {
 		regulator_put(em_x270_camera_ldo);
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return ret;
 	}
 
-	gpio_set_value(GPIO93_CAM_RESET, 1);
+	gpio_set_value(cam_reset, 1);
 
 	return 0;
 }
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (on == is_on)
 		return 0;
 
-	gpio_set_value(GPIO93_CAM_RESET, !on);
+	gpio_set_value(cam_reset, !on);
 
 	if (on)
 		ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (ret)
 		return ret;
 
-	gpio_set_value(GPIO93_CAM_RESET, on);
+	gpio_set_value(cam_reset, on);
 
 	return 0;
 }
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	},
 };
 
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
-	.fast_mode = 1,
-};
-
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_i2c_info(&em_x270_i2c_info);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
 }
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
 };
 
 struct power_supply_info em_x270_psy_info = {
-	.name = "LP555597P6H-FPS",
+	.name = "battery",
 	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
 	.voltage_max_design = 4200000,
 	.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
 	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
 }
 
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+	.gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x21),
+		.platform_data = &exeda_gpio_ext_pdata,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+
+	if (machine_is_exeda())
+		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
 static void __init em_x270_module_init(void)
 {
 	pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
 	mmc_cd = GPIO13_MMC_CD;
 	nand_rb = GPIO56_NAND_RB;
 	dm9000_flags = DM9000_PLATF_32BITONLY;
+	cam_reset = GPIO93_CAM_RESET;
+	usb_hub_reset = GPIO16_USB_HUB_RESET;
 }
 
 static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
 	mmc_cd = GPIO114_MMC_CD;
 	nand_rb = GPIO20_NAND_RB;
 	dm9000_flags = DM9000_PLATF_16BITONLY;
+	cam_reset = GPIO130_CAM_RESET;
+	usb_hub_reset = GPIO10_USB_HUB_RESET;
 }
 
 static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	if (machine_is_em_x270())
 		em_x270_module_init();
 	else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
-	em_x270_init_camera();
 	em_x270_init_spi();
+	em_x270_init_i2c();
+	em_x270_init_camera();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 7db966dc29c..588b265e575 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -25,13 +26,19 @@
 #include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define GPIO12_A780_FLIP_LID 		12
+#define GPIO15_A1200_FLIP_LID 		15
+#define GPIO15_A910_FLIP_LID 		15
+#define GPIO12_E680_LOCK_SWITCH 	12
+#define GPIO15_E6_LOCK_SWITCH 		15
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
 	.max_brightness	= 1023,
@@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = {
 	.lcd_conn	= LCD_COLOR_TFT_18BPP,
 };
 
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata = {
 	&ezx_backlight_device,
 };
 
@@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 #endif /* CONFIG_MACH_EZX_E2 */
 
 #ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+	&a780_gpio_keys,
+};
+
 static void __init a780_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -663,7 +699,8 @@ static void __init a780_init(void)
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -678,10 +715,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO12_E680_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E680 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+	.buttons  = e680_buttons,
+	.nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e680_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e680_devices[] __initdata = {
+	&e680_gpio_keys,
+};
+
 static void __init e680_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -695,7 +761,8 @@ static void __init e680_init(void)
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
@@ -710,10 +777,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A1200_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A1200 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+	.buttons  = a1200_buttons,
+	.nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a1200_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *a1200_devices[] __initdata = {
+	&a1200_gpio_keys,
+};
+
 static void __init a1200_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -727,7 +823,8 @@ static void __init a1200_init(void)
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
@@ -742,6 +839,35 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A910_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A910 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+	.buttons  = a910_buttons,
+	.nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a910_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+	&a910_gpio_keys,
+};
+
 static void __init a910_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -754,7 +880,8 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
@@ -769,10 +896,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO15_E6_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E6 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+	.buttons  = e6_buttons,
+	.nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e6_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e6_devices[] __initdata = {
+	&e6_gpio_keys,
+};
+
 static void __init e6_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -786,7 +942,8 @@ static void __init e6_init(void)
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
@@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e2_devices[] __initdata = {
+};
+
 static void __init e2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -818,7 +978,8 @@ static void __init e2_init(void)
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 00000000000..7fff467e84f
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,851 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ *    Copyright (c) 2004 Hewlett-Packard Company.
+ *    Copyright (c) 2005 SDG Systems, LLC
+ *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/lcd.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/hx4700.h>
+#include <plat/i2c.h>
+#include <mach/irda.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS      PXA_CS3_PHYS
+#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,   /* W3220 */
+	GPIO79_nCS_3,   /* ASIC3 */
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* EGPIO, WLAN */
+
+	/* PC CARD */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO85_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* FFUART (RS-232) */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* PWM 1 (Backlight) */
+	GPIO17_PWM1_OUT,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* SSP 1 (NavPoint) */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP 2 (TSC2046) */
+	GPIO19_SSP2_SCLK,
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+	GPIO88_GPIO,
+
+	/* HX4700 specific input GPIOs */
+	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO13_GPIO,	/* W3220_IRQ */
+	GPIO14_GPIO,	/* nWLAN_IRQ */
+
+	GPIO10_GPIO,	/* GSM_IRQ */
+	GPIO13_GPIO,	/* CPLD_IRQ */
+	GPIO107_GPIO,	/* DS1WM_IRQ */
+	GPIO108_GPIO,	/* GSM_READY */
+	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
+	GPIO66_GPIO,	/* nSDIO_IRQ */
+};
+
+#define HX4700_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define HX4700_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			pr_err("Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+/*
+ * IRDA
+ */
+
+static void irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data ficp_info = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
+	{						\
+		.code       = KEY_##_code,		\
+		.gpio       = _gpio,			\
+		.active_low = _active_low,		\
+		.desc       = _desc,			\
+		.type       = EV_KEY,			\
+		.wakeup     = 1,			\
+	}
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
+	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
+	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
+	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
+	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+	.buttons = gpio_keys_buttons,
+	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+	.name = "gpio-keys",
+	.dev  = {
+		.platform_data = &gpio_keys_data,
+	},
+	.id   = -1,
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+	/* ASIC3 GPIO banks A and B along with some of C and D
+	   implement the buffering for the CF slot. */
+	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+	/* GPIOC - CF, LEDs, SD */
+	ASIC3_GPIOC0_LED0,		/* red */
+	ASIC3_GPIOC1_LED1,		/* green */
+	ASIC3_GPIOC2_LED2,		/* blue */
+	ASIC3_GPIOC4_CF_nCD,
+	ASIC3_GPIOC5_nCIOW,
+	ASIC3_GPIOC6_nCIOR,
+	ASIC3_GPIOC7_nPCE_1,
+	ASIC3_GPIOC8_nPCE_2,
+	ASIC3_GPIOC9_nPOE,
+	ASIC3_GPIOC10_nPWE,
+	ASIC3_GPIOC11_PSKTSEL,
+	ASIC3_GPIOC12_nPREG,
+	ASIC3_GPIOC13_nPWAIT,
+	ASIC3_GPIOC14_nPIOIS16,
+	ASIC3_GPIOC15_nPIOR,
+
+	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD11_nCIOIS16,
+	ASIC3_GPIOD12_nCWAIT,
+	ASIC3_GPIOD15_nPIOW,
+};
+
+static struct resource asic3_resources[] = {
+	/* GPIO part */
+	[0] = {
+		.start	= ASIC3_PHYS,
+		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* SD part */
+	[2] = {
+		.start	= ASIC3_SD_PHYS,
+		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+	.gpio_config     = asic3_gpio_config,
+	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+	.irq_base        = IRQ_BOARD_START,
+	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+};
+
+static struct platform_device asic3 = {
+	.name          = "asic3",
+	.id            = -1,
+	.resource      = asic3_resources,
+	.num_resources = ARRAY_SIZE(asic3_resources),
+	.dev = {
+		.platform_data = &asic3_platform_data,
+	},
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 0x4 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start = 0,
+		.gpio_base = HX4700_EGPIO_BASE,
+		.num_gpios = 8,
+		.direction = HTC_EGPIO_OUTPUT,
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width = 16,
+	.bus_width = 16,
+	.chip      = egpio_chips,
+	.num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+	.name          = "htc-egpio",
+	.id            = -1,
+	.resource      = egpio_resources,
+	.num_resources = ARRAY_SIZE(egpio_resources),
+	.dev = {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static int lcd_power;
+
+static void sony_lcd_init(void)
+{
+	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	mdelay(20);
+
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+	mdelay(5);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+	/* FIXME: init w3220 registers here */
+
+	mdelay(5);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
+{
+	switch (level) {
+	case FB_BLANK_UNBLANK:
+		sony_lcd_init();
+		break;
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_POWERDOWN:
+		sony_lcd_off();
+		break;
+	}
+	lcd_power = level;
+	return 0;
+}
+
+static int hx4700_lcd_get_power(struct lcd_device *lm)
+{
+	return lcd_power;
+}
+
+static struct lcd_ops hx4700_lcd_ops = {
+	.get_power = hx4700_lcd_get_power,
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct lcd_device *hx4700_lcd_device;
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+	sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+	sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume	NULL
+#define w3220_lcd_suspend	NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+	.suspend	= w3220_lcd_suspend,
+	.resume		= w3220_lcd_resume,
+};
+
+/*  				 W3220_VGA		QVGA */
+static struct w100_gen_regs w3220_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+	.xres 		= 480,
+	.yres 		= 640,
+	.left_margin 	= 15,
+	.right_margin 	= 16,
+	.upper_margin 	= 8,
+	.lower_margin 	= 7,
+	.crtc_ss	= 0x00000000,
+	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
+	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
+	.crtc_vpos_gs	= 0x0000028f,
+	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
+	.crtc_rev	= 0,
+	.crtc_dclk	= 0x80000000,
+	.crtc_gclk	= 0x040a0104,
+	.crtc_goe	= 0,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+{
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls        = 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+	.ext_mem_bw = 0x50413e01,
+	.offset = 0,
+	.ext_timing_ctl = 0x00043f7f,
+	.ext_cntl = 0x00000010,
+	.mode_reg = 0x00250000,
+	.io_cntl = 0x0fff0000,
+	.config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
+	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+	.tg        = &w3220_tg_info,
+	.mem       = &w3220_mem_info,
+	.bm_mem    = &w3220_bm_mem_info,
+	.gpio      = &w3220_gpio_info,
+	.regs      = &w3220_regs,
+	.modelist  = w3220_modes,
+	.num_modes = 2,
+	.xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+	[0] = {
+		.start	= ATI_W3220_PHYS,
+		.end	= ATI_W3220_PHYS + 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device w3220 = {
+	.name	= "w100fb",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &w3220_info,
+	},
+	.num_resources = ARRAY_SIZE(w3220_resources),
+	.resource      = w3220_resources,
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 1,
+	.max_brightness = 200,
+	.dft_brightness = 100,
+	.pwm_period_ns  = 30923,
+};
+
+static struct platform_device backlight = {
+	.name = "pwm-backlight",
+	.id   = -1,
+	.dev  = {
+		.parent        = &pxa27x_device_pwm1.dev,
+		.platform_data = &backlight_data,
+	},
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
+	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
+	.gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+	.name          = "gpio-vbus",
+	.id            = -1,
+	.dev = {
+		.platform_data = &gpio_vbus_info,
+	},
+};
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+	.model            = 7846,
+	.vref_delay_usecs = 100,
+	.pressure_max     = 512,
+	.debounce_max     = 10,
+	.debounce_tol     = 3,
+	.debounce_rep     = 1,
+	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+	.tx_threshold = 1,
+	.rx_threshold = 2,
+	.timeout      = 64,
+	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+	{
+		.modalias        = "ads7846",
+		.bus_num         = 2,
+		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
+		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+		.platform_data   = &tsc2046_info,
+		.controller_data = &tsc2046_chip,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+	.num_chipselect = 1,
+	.clock_enable   = CKEN_SSP2,
+	.enable_dma     = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+	return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+	"ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = hx4700_is_ac_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = hx4700_supplicants,
+	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD9_nAC_IN),
+		.end   = gpio_to_irq(GPIOD9_nAC_IN),
+	},
+	[1] = {
+		.name  = "usb",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+	},
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+	{
+		.dev = &gpio_vbus.dev,
+		.supply = "vbus_draw",
+	},
+	{
+		.dev = &power_supply.dev,
+		.supply = "ac_draw",
+	},
+};
+
+static struct regulator_init_data bq24022_init_data = {
+	.constraints = {
+		.max_uA         = 500000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies      = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+	.gpio_nce   = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+	.gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
+	.init_data  = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+	.name = "bq24022",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &bq24022_info,
+	},
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct map_info *map, int vpp)
+{
+	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_128M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 4,
+	.set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+	.name          = "physmap-flash",
+	.id            = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * PCMCIA
+ */
+
+static struct platform_device pcmcia = {
+	.name = "hx4700-pcmcia",
+	.dev  = {
+		.parent = &asic3.dev,
+	},
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&asic3,
+	&gpio_keys,
+	&backlight,
+	&w3220,
+	&egpio,
+	&bq24022,
+	&gpio_vbus,
+	&power_supply,
+	&strataflash,
+	&pcmcia,
+};
+
+static struct gpio_ress global_gpios[] = {
+	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
+	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
+	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
+	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"),
+	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"),
+	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"),
+	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"),
+	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
+	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
+	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"),
+	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"),
+	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"),
+	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"),
+};
+
+static void __init hx4700_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	pxa_set_ficp_info(&ficp_info);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
+					(void *)&w3220_info, &hx4700_lcd_ops);
+
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+	mdelay(10);
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+	.phys_io      = 0x40000000,
+	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params  = 0xa0000100,
+	.map_io       = pxa_map_io,
+	.init_irq     = pxa27x_init_irq,
+	.init_machine = hx4700_init,
+	.timer        = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2b27336c29f..961807dc646 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/udc.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+
 	/* Connector pins specified as gpios */
 	GPIO94_GPIO, /* large basic connector pin 14 */
 	GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO105_GPIO, /* blue led */
 };
 
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
 static struct gpio_led imote2_led_pins[] = {
 	{
 		.name       =  "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
 			.min_uV = 2800000,
 			.max_uV = 3000000,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+		.consumer_supplies = imote2_sensor_3_con,
 	},
 	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
 		.constraints = {
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 		.type = "tmp175",
 		.addr = 0x4A,
 		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
 	},
 };
 
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
 	.num_chipselect = 1,
 };
 
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
-	gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
-	gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
 static struct pxa2xx_spi_chip staccel_chip_info = {
 	.tx_threshold = 8,
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi1control,
+	.gpio_cs = 24,
 };
 
 static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi3control,
+	.gpio_cs = 39,
 };
 
 static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
 static struct platform_device *imote2_devices[] = {
 	&imote2_flash_device,
 	&imote2_leds,
+	&sht15,
 };
 
 static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
-	gpio_direction_output(24, 0);
-	gpio_direction_output(39, 0);
 
 	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
 
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 00000000000..9eaeed1f87f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,131 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+
+#define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER			0
+#define GPIO12_HX4700_ASIC3_IRQ			12
+#define GPIO13_HX4700_W3220_IRQ			13
+#define GPIO14_HX4700_nWLAN_IRQ			14
+#define GPIO18_HX4700_RDY			18
+#define GPIO22_HX4700_LCD_RL			22
+#define GPIO27_HX4700_CODEC_ON			27
+#define GPIO32_HX4700_RS232_ON			32
+#define GPIO52_HX4700_CPU_nBATT_FAULT		52
+#define GPIO58_HX4700_TSC2046_nPENIRQ		58
+#define GPIO59_HX4700_LCD_PC1			59
+#define GPIO60_HX4700_CF_RNB			60
+#define GPIO61_HX4700_W3220_nRESET		61
+#define GPIO62_HX4700_LCD_nRESET		62
+#define GPIO63_HX4700_CPU_SS_nRESET		63
+#define GPIO65_HX4700_TSC2046_PEN_PU		65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
+#define GPIO67_HX4700_EUART_PS			67
+#define GPIO70_HX4700_LCD_SLIN1			70
+#define GPIO71_HX4700_ASIC3_nRESET		71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
+#define GPIO73_HX4700_LCD_UD_1			73
+#define GPIO75_HX4700_EARPHONE_nDET		75
+#define GPIO76_HX4700_USBC_PUEN			76
+#define GPIO81_HX4700_CPU_GP_nRESET		81
+#define GPIO82_HX4700_EUART_RESET		82
+#define GPIO83_HX4700_WLAN_nRESET		83
+#define GPIO84_HX4700_LCD_SQN			84
+#define GPIO85_HX4700_nPCE1			85
+#define GPIO88_HX4700_TSC2046_CS		88
+#define GPIO91_HX4700_FLASH_VPEN		91
+#define GPIO92_HX4700_HP_DRIVER			92
+#define GPIO93_HX4700_EUART_INT			93
+#define GPIO94_HX4700_KEY_MAIL			94
+#define GPIO95_HX4700_BATT_OFF			95
+#define GPIO96_HX4700_BQ24022_ISET2		96
+#define GPIO97_HX4700_nBL_DETECT		97
+#define GPIO99_HX4700_KEY_CONTACTS		99
+#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
+#define GPIO103_HX4700_SYNAPTICS_INT		103
+#define GPIO105_HX4700_nIR_ON			105
+#define GPIO106_HX4700_CPU_BT_nRESET		106
+#define GPIO107_HX4700_SPK_nSD			107
+#define GPIO109_HX4700_CODEC_nPDN		109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
+#define GPIO114_HX4700_CF_RESET			114
+#define GPIO116_HX4700_CPU_HW_nRESET		116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
+#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
+#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
+#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
+#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
+#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
+#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
+#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
+#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
+#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
+#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
+#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
+#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
+#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
+#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
+#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
+#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
+#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
+#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
+#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
+#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
+#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
+#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
+#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32bb4a2eb7f..6a1d9599334 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,13 +91,23 @@
 #define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
 
 /*
- * The next 16 interrupts are for board specific purposes.  Since
+ * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
+ * these.  There will be 16 IRQs by default.  If it is not enough,
+ * IRQ_BOARD_END is allowed be customized for each board, but keep
+ * the numbers within sensible limits and in descending order, so
+ * when multiple config options are selected, the maximum will be
+ * used.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+
+#if defined(CONFIG_MACH_H4700)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+#endif
 
 #define IRQ_SA1111_START	(IRQ_BOARD_END)
 #define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
@@ -188,8 +198,6 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS			(IRQ_BOARD_START + 32)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 07897e61d05..3ce4682eabb 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -283,6 +283,9 @@
 #define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
 #define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
 #define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
 #define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
 #define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
 #define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
@@ -291,6 +294,9 @@
 #define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
 #define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
 #define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
 #define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
 #define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
 #define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
@@ -299,13 +305,18 @@
 #define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
 #define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
 #define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
 #define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
 #define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
 #define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
 #define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
 #define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
 #define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
 #define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
 #define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
 
 /* UART2 */
@@ -438,6 +449,9 @@
 
 #define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
 #define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
 
 #define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
 #define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index fb13c82ad6d..8721b801022 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -56,7 +56,6 @@
 #define GPIO_NR_PALMLD_LED_AMBER	94
 
 /* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ		95
 #define GPIO_NR_PALMLD_IDE_RESET	98
 #define GPIO_NR_PALMLD_IDE_PWEN		115
 
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index a6eeef8a075..fd8360c6839 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int);
 extern void pxa_cpu_resume(void);
 
 extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
 
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 6876e16c297..0b702693f45 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -16,4 +16,7 @@
 #define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+extern int __init pxa27x_set_pwrmode(unsigned int mode);
+
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 2d00db22b98..1920dc6b05d 100644
--- a/arch/arm/include/asm/hardware/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-
-#include <linux/interrupt.h>
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
 
 struct sharpsl_charger_machinfo {
 	void (*init)(void);
@@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm;
 
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
 
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5706cea95d1..b54749413e9 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -36,7 +36,8 @@ static inline void flush(void)
 static inline void arch_decomp_setup(void)
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
-			|| machine_is_csb726())
+	    || machine_is_csb726() || machine_is_stargate2()
+	    || machine_is_cm_x300())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9feb4d..55b3788fd1a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
 
 #include "generic.h"
 
+#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
+
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
@@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO123_KP_MKOUT_2,
 	GPIO124_KP_MKOUT_3,
 	GPIO125_KP_MKOUT_4,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+	GPIO15_GPIO, /* card detect */
 };
 
 static struct resource smc91x_resources[] = {
@@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
 	.num_chipselect		= 1,
 };
 
-static void littleton_tdo24m_cs(u32 cmd)
-{
-	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
-	.cs_control	= littleton_tdo24m_cs,
+	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 
 static void __init littleton_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
-	if (err) {
-		pr_warning("failed to request GPIO for LCS CS\n");
-		return;
-	}
-
-	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
@@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int littleton_mci_init(struct device *dev,
+			      irq_handler_t littleton_detect_int, void *data)
+{
+	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	err = gpio_request(gpio_cd, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+
+	gpio_direction_input(gpio_cd);
+
+	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "mmc card detect", data);
+	if (err) {
+		dev_err(dev, "failed to request card detect IRQ\n");
+		goto err_request_irq;
+	}
+	return 0;
+
+err_request_irq:
+	gpio_free(gpio_cd);
+err_request_cd:
+	return err;
+}
+
+static void littleton_mci_exit(struct device *dev, void *data)
+{
+	int gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	free_irq(gpio_to_irq(gpio_cd), data);
+	gpio_free(gpio_cd);
+}
+
+static struct pxamci_platform_data littleton_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 		= littleton_mci_init,
+	.exit		= littleton_mci_exit,
+};
+
+static void __init littleton_init_mmc(void)
+{
+	pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
@@ -407,6 +454,7 @@ static void __init littleton_init(void)
 
 	littleton_init_spi();
 	littleton_init_i2c();
+	littleton_init_mmc();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c899bbd94dc..ca39669cffc 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -36,7 +36,7 @@
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
@@ -745,6 +745,14 @@ static struct platform_device strataflash = {
 };
 
 /*
+ * I2C
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+	.fast_mode = 1,
+};
+
+/*
  * Platform devices
  */
 
@@ -771,7 +779,7 @@ static void __init magician_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
 	if (!err) {
@@ -779,7 +787,7 @@ static void __init magician_init(void)
 		pxa_set_ficp_info(&magician_ficp_info);
 	}
 	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
+	pxa_set_i2c_info(&i2c_info);
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a6c8429e975..f4dabf0273c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,7 +46,7 @@
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index ff8052ce0a0..4dc8c2ec40a 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -48,7 +48,7 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <media/soc_camera.h>
@@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd)
 	arm_machine_restart('s', cmd);
 }
 
-struct gpio_ress global_gpios[] = {
+static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
 	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 471a853e548..ed70f281dd0 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -129,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO81_GPIO,	/* wifi reset */
 
 	/* HDD */
-	GPIO95_GPIO,	/* HDD irq */
+	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
 
 	/* MISC */
@@ -496,6 +496,14 @@ static struct platform_device palmld_asoc = {
 };
 
 /******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+	.name	= "pata_palmld",
+	.id	= -1,
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmld_lcd_modes[] = {
@@ -524,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmld_pm_init(void)
+static void __init palmld_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMLD_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmld_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -559,6 +555,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_leds,
 	&power_supply,
 	&palmld_asoc,
+	&palmld_hdd,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -586,6 +583,7 @@ static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
 	pxa_set_ac97_info(&palmld_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 05bf979b78a..aae64a12a73 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -343,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmt5_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmt5_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmt5_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -466,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmt5_pm_init(void)
+static void __init palmt5_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMT5_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmt5_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -500,6 +496,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmt5_backlight,
 	&power_supply,
 	&palmt5_asoc,
+	&palmt5_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -515,14 +512,15 @@ static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
 	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_udc_info(&palmt5_udc_info);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 43fcf2e8688..d823b09801d 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/mfp-pxa25x.h>
 #include <mach/irda.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
 	GPIO1_RST,	/* reset */
 	GPIO4_GPIO,	/* Hotsync button */
 	GPIO9_GPIO,	/* power detect */
+	GPIO15_GPIO,	/* earphone detect */
 	GPIO37_GPIO,	/* LCD power */
 	GPIO56_GPIO,	/* Backlight power */
 };
@@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmte2_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmte2_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 };
 
 /******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmte2_asoc_pdata,
+	},
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmte2_lcd_modes[] = {
@@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmte2_backlight,
 	&power_supply,
+	&palmte2_asoc,
+	&palmte2_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -447,7 +474,6 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_udc_info(&palmte2_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e99a893c58a..6c15d84bde5 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -359,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmtx_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmtx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtx_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -483,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmtx_pm_init(void)
+static void __init palmtx_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMTX_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmtx_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -517,6 +513,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmtx_backlight,
 	&power_supply,
 	&palmtx_asoc,
+	&palmtx_gpio_vbus,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -548,11 +545,11 @@ static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
 	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6c12b5a3132..095521e9ee2 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,7 +28,7 @@
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 884b174c8ea..7693355ee63 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
-static int pxa_pm_prepare(void)
+int pxa_pm_prepare(void)
 {
 	int ret = 0;
 
@@ -89,7 +89,7 @@ static int pxa_pm_prepare(void)
 	return ret;
 }
 
-static void pxa_pm_finish(void)
+void pxa_pm_finish(void)
 {
 	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
 		pxa_cpu_pm_fns->finish();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 036bbde4d22..ac431ed1039 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -39,7 +39,7 @@
 #include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
@@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = {
 	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static void ads7846_cs(u32 command)
-{
-	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.cs_control		= ads7846_cs,
+	.gpio_cs		= POODLE_GPIO_TP_CS,
 };
 
 static struct spi_board_info poodle_spi_devices[] = {
@@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = {
 
 static void __init poodle_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
-
 	pxa2xx_set_spi_info(1, &poodle_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a425ec71e65..ec68cc16b4e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,7 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = {
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
 /*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int __init pxa27x_set_pwrmode(unsigned int mode)
+{
+	switch (mode) {
+	case PWRMODE_SLEEP:
+	case PWRMODE_DEEPSLEEP:
+		pwrmode = mode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
@@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(PWRMODE_SLEEP);
+		pxa27x_cpu_suspend(pwrmode);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b02d4544dc9..6f678d93bf4 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct platform_device *devices[] __initdata = {
-/*	&pxa_device_udc,	The UDC driver is PXA25x only */
+	&pxa27x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ff823999143..8241a63ea58 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -27,7 +27,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa930.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 047909a7665..55259f4756c 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -7,7 +7,7 @@
  *
  */
 
-#include <asm/hardware/sharpsl_pm.h>
+#include <mach/sharpsl_pm.h>
 
 /*
  * SharpSL SSP Driver
@@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode);
 
 extern struct battery_thresh spitz_battery_levels_acin[];
 extern struct battery_thresh spitz_battery_levels_noac[];
-void sharpsl_pm_pxa_init(void);
-void sharpsl_pm_pxa_remove(void);
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 16b4ec67e3b..2546c066cd6 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,20 +15,69 @@
 #undef DEBUG
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
+#include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
+
 #include "sharpsl.h"
 
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
 struct battery_thresh spitz_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
@@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 #endif
 }
 
-void sharpsl_pm_pxa_init(void)
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_delayed_work(&toggle_charger, 0);
+
+	while(1) {
+		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+#ifdef CONFIG_BACKLIGHT_CORGI
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			sharpsl_pm.machinfo->backlight_limit(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		sharpsl_pm.machinfo->backlight_limit(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+#endif
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_err(sharpsl_pm.dev, "Charging Error!\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+	}
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_OFF);
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
 {
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	sharpsl_pm_led(SHARPSL_LED_ON);
+	sharpsl_pm.machinfo->charge(0);
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	sharpsl_pm.machinfo->charge(1);
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+   delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+	int is_fatal = 0;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		sharpsl_pm.machinfo->measure_temp(1);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+		sharpsl_pm.machinfo->measure_temp(0);
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > sharpsl_pm.machinfo->charge_on_temp) {
+		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+	int val, i, buff[5];
+
+	/* disable charge, enable discharge */
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.machinfo->discharge(1);
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	sharpsl_pm.machinfo->discharge(0);
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < sharpsl_pm.machinfo->charge_on_volt)
+		return -1;
+
+	return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	if (sharpsl_pm.machinfo->earlyresume)
+		sharpsl_pm.machinfo->earlyresume();
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		sharpsl_pm.machinfo->charge(0);
+		udelay(100);
+		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.machinfo->discharge(0);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		sharpsl_pm_led(SHARPSL_LED_ON);
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+			return sharpsl_off_charge_error();
+
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occurred */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+				sharpsl_pm.full_count++;
+				sharpsl_pm.machinfo->charge(0);
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				sharpsl_pm.machinfo->charge(1);
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occurred */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+#else
+#define sharpsl_pm_suspend	NULL
+#define sharpsl_pm_resume	NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static struct platform_suspend_ops sharpsl_pm_ops = {
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
+	.enter		= corgi_pxa_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+#endif
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = &pdev->dev;
+	sharpsl_pm.machinfo = pdev->dev.platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+	sharpsl_pm.machinfo->init();
+
+	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
 	/* Register interrupt handlers */
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 	{
 		/* Register interrupt handler. */
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+	if (ret != 0)
+		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+	suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
 }
 
-void sharpsl_pm_pxa_remove(void)
+static int sharpsl_pm_remove(struct platform_device *pdev)
 {
+	suspend_set_ops(NULL);
+
+	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
@@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void)
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+	if (sharpsl_pm.machinfo->exit)
+		sharpsl_pm.machinfo->exit();
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
 }
+
+static struct platform_driver sharpsl_pm_driver = {
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+	.driver		= {
+		.name		= "sharpsl-pm",
+	},
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+	platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5a45fe340a1..dda310fe71c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
 #include <linux/mtd/sharpsl.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
 
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
-static void spitz_ads7846_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.cs_control		= spitz_ads7846_cs,
+	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
 static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static void spitz_lcdcon_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.cs_control	= spitz_lcdcon_cs,
+	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
 };
 
-static void spitz_max1111_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.cs_control	= spitz_max1111_cs,
+	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 
 static void __init spitz_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
-	if (err)
-		goto err_free_3;
-
 	if (machine_is_akita()) {
 		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-	return;
-
-err_free_3:
-	gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
-	gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(SPITZ_GPIO_ADS7846_CS);
 }
 #else
 static inline void spitz_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 2e4490562c9..724ffb03031 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -41,7 +41,6 @@ static void spitz_charger_init(void)
 {
 	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
 	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void spitz_measure_temp(int on)
@@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type)
 
 struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.init             = spitz_charger_init,
-	.exit             = sharpsl_pm_pxa_remove,
+	.exit             = NULL,
 	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
 	.gpio_acin        = SPITZ_GPIO_AC_IN,
 	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 00000000000..3b205b69f3f
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,796 @@
+/*
+ *  linux/arch/arm/mach-pxa/stargate2.c
+ *
+ *  Author:	Ed C. Epp
+ *  Created:	Nov 05, 2002
+ *  Copyright:	Intel Corp.
+ *
+ *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET		81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT	90
+#define SG2_SD_POWER_ENABLE	89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+	/* Device Identification for wakeup*/
+	GPIO102_GPIO,
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* DA9030 */
+	GPIO1_GPIO,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
+
+	/* cc2420 802.15.4 radio */
+	GPIO22_GPIO,		/* CC_RSTN  (out)*/
+	GPIO114_GPIO,		/* CC_FIFO (in) */
+	GPIO116_GPIO, 		/* CC_CCA (in) */
+	GPIO0_GPIO,		/* CC_FIFOP (in) */
+	GPIO16_GPIO,		/* CCSFD (in) */
+	GPIO39_GPIO,		/* CSn (out) */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP 3 - 802.15.4 radio */
+	GPIO39_GPIO, /* chip select */
+	GPIO34_SSP3_SCLK,
+	GPIO35_SSP3_TXD,
+	GPIO41_SSP3_RXD,
+
+	/* SSP 2 */
+	GPIO11_SSP2_RXD,
+	GPIO38_SSP2_TXD,
+	GPIO36_SSP2_SCLK,
+	GPIO37_GPIO, /* chip select */
+
+	/* SSP 1 */
+	GPIO26_SSP1_RXD,
+	GPIO25_SSP1_TXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_GPIO, /* chip select */
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
+
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
+
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
+enum stargate2_ldos{
+	vcc_vref,
+	vcc_cc2420,
+	/* a mote connector? */
+	vcc_mica,
+	/* the CSR bluecore chip */
+	vcc_bt,
+	/* The two voltages available to sensor boards */
+	vcc_sensor_1_8,
+	vcc_sensor_3,
+	/* directly connected to the pxa27x */
+	vcc_sram_ext,
+	vcc_pxa_pll,
+	vcc_pxa_usim, /* Reference voltage for certain gpios */
+	vcc_pxa_mem,
+	vcc_pxa_flash,
+	vcc_pxa_core, /*Dc-Dc buck not yet supported */
+	vcc_lcd,
+	vcc_bb,
+	vcc_bbio, /*not sure!*/
+	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo.  Unfortunately this information is
+ * not generally available.  More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+	[vcc_bbio] = {
+		.constraints = { /* board default 1.8V */
+			.name = "vcc_bbio",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_bb] = {
+		.constraints = { /* board default 2.8V */
+			.name = "vcc_bb",
+			.min_uV = 2700000,
+			.max_uV = 3000000,
+		},
+	},
+	[vcc_pxa_flash] = {
+		.constraints = {/* default is 1.8V */
+			.name = "vcc_pxa_flash",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_cc2420] = { /* also vcc_io */
+		.constraints = {
+			/* board default is 2.8V */
+			.name = "vcc_cc2420",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_vref] = { /* Reference for what? */
+		.constraints = { /* default 1.8V */
+			.name = "vcc_vref",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sram_ext] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_sram_ext",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_mica] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_mica",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_bt] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_bt",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_lcd] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_lcd",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_io] = { /* Same or higher than everything
+			  * bar vccbat and vccusb */
+		.constraints = { /* default 2.8V */
+			.name = "vcc_io",
+			.min_uV = 2692000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_sensor_1_8] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_sensor_1_8",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sensor_3] = { /* curiously default 2.8V */
+		.constraints = {
+			.name = "vcc_sensor_3",
+			.min_uV = 2800000,
+			.max_uV = 3000000,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+		.consumer_supplies = stargate2_sensor_3_con,
+	},
+	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+		.constraints = {
+			.name = "vcc_pxa_pll",
+			.min_uV = 1170000,
+			.max_uV = 1430000,
+		},
+	},
+	[vcc_pxa_usim] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_usim",
+			.min_uV = 1710000,
+			.max_uV = 2160000,
+		},
+	},
+	[vcc_pxa_mem] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_mem",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name = "smc91x-regs",
+		.start = (PXA_CS4_PHYS + 0x300),
+		.end = (PXA_CS4_PHYS + 0xfffff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_GPIO(40),
+		.end = IRQ_GPIO(40),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+	| SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev = {
+		.platform_data = &stargate2_smc91x_info,
+	},
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+			      irq_handler_t stargate2_detect_int,
+			      void *data)
+{
+	int err;
+
+	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+	if (err) {
+		printk(KERN_ERR "Can't get the gpio for SD power control");
+		goto return_err;
+	}
+	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+	if (err) {
+		printk(KERN_ERR "Can't get the sd detect gpio");
+		goto free_power_en;
+	}
+	gpio_direction_input(SG2_GPIO_nSD_DETECT);
+	/* Delay to allow for full insertion */
+	stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+			  stargate2_detect_int,
+			  IRQ_TYPE_EDGE_BOTH,
+			  "MMC card detect",
+			  data);
+	if (err) {
+		printk(KERN_ERR "can't request MMC card detect IRQ\n");
+		goto free_nsd_detect;
+	}
+	return 0;
+
+ free_nsd_detect:
+	gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+	gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+	return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+	gpio_free(SG2_SD_POWER_ENABLE);
+	gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init = stargate2_mci_init,
+	.setpower = stargate2_mci_setpower,
+	.exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+	{
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
+	}, {
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
+	}, {
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+	.start = PXA_CS1_PHYS,
+	.end = PXA_CS1_PHYS + SZ_32M-1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+	.mapname = "Stargate2 SRAM",
+	.bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+	.name = "mtd-ram",
+	.id = 0,
+	.resource = &sram_resources,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &stargate2_sram_pdata,
+	},
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+	.gpio_base = 128,
+	.n_latch = 0,
+	.setup = NULL,
+	.teardown = NULL,
+	.context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+	.byte_len = 256,
+	.page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+	/* Techically this a pca9500 - but it's compatible with the 8574
+	 * for gpio expansion and the 24c02 for eeprom access.
+	 */
+	{
+		.type = "pcf8574",
+		.addr =  0x27,
+		.platform_data = &platform_data_pcf857x,
+	}, {
+		.type = "24c02",
+		.addr = 0x57,
+		.platform_data = &pca9500_eeprom_pdata,
+	}, {
+		.type = "max1238",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	},
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
+	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+	.udc_is_connected	= sg2_udc_detect,
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+	&stargate2_flash_device,
+	&stargate2_sram,
+	&smc91x_device,
+	&sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+	/* This is probably a board specific hack as this must be set
+	   prior to connecting the MFP stuff up. */
+	MECR &= ~MECR_NOS;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+	/* spi chip selects */
+	gpio_direction_output(37, 0);
+	gpio_direction_output(24, 0);
+	gpio_direction_output(39, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+	i2c_register_board_info(1,
+				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+
+	pxa_set_mci_info(&stargate2_mci_platform_data);
+
+	pxa_set_udc_info(&stargate2_udc_info);
+
+	stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa27x_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = stargate2_init,
+	.boot_params = 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index fb0294bd431..c31e601eb49 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -35,21 +35,25 @@ static void tosa_bt_off(struct tosa_bt_data *data)
 	gpio_set_value(data->gpio_reset, 0);
 }
 
-static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+static int tosa_bt_set_block(void *data, bool blocked)
 {
-	pr_info("BT_RADIO going: %s\n",
-			state == RFKILL_STATE_ON ? "on" : "off");
+	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
 
-	if (state == RFKILL_STATE_ON) {
+	if (!blocked) {
 		pr_info("TOSA_BT: going ON\n");
 		tosa_bt_on(data);
 	} else {
 		pr_info("TOSA_BT: going OFF\n");
 		tosa_bt_off(data);
 	}
+
 	return 0;
 }
 
+static const struct rfkill_ops tosa_bt_rfkill_ops = {
+	.set_block = tosa_bt_set_block,
+};
+
 static int tosa_bt_probe(struct platform_device *dev)
 {
 	int rc;
@@ -70,18 +74,14 @@ static int tosa_bt_probe(struct platform_device *dev)
 	if (rc)
 		goto err_pwr_dir;
 
-	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
+			   &tosa_bt_rfkill_ops, data);
 	if (!rfk) {
 		rc = -ENOMEM;
 		goto err_rfk_alloc;
 	}
 
-	rfk->name = "tosa-bt";
-	rfk->toggle_radio = tosa_bt_toggle_radio;
-	rfk->data = data;
-#ifdef CONFIG_RFKILL_LEDS
-	rfk->led_trigger.name = "tosa-bt";
-#endif
+	rfkill_set_led_trigger_name(rfk, "tosa-bt");
 
 	rc = rfkill_register(rfk);
 	if (rc)
@@ -92,9 +92,7 @@ static int tosa_bt_probe(struct platform_device *dev)
 	return 0;
 
 err_rfkill:
-	if (rfk)
-		rfkill_free(rfk);
-	rfk = NULL;
+	rfkill_destroy(rfk);
 err_rfk_alloc:
 	tosa_bt_off(data);
 err_pwr_dir:
@@ -113,8 +111,10 @@ static int __devexit tosa_bt_remove(struct platform_device *dev)
 
 	platform_set_drvdata(dev, NULL);
 
-	if (rfk)
+	if (rfk) {
 		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
 	rfk = NULL;
 
 	tosa_bt_off(data);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index a0bd46ef5d3..117ad5920e5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -31,7 +31,6 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/rfkill.h>
 #include <linux/spi/spi.h>
 
 #include <asm/setup.h>
@@ -40,7 +39,7 @@
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f79c9cb70ae..825f540176d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,7 +47,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index dd031cc4184..d33c232b686 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -45,7 +45,7 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/regs-uart.h>
 #include <mach/viper.h>
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c256c57642c..cefd1c0a854 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec1062777..d4cfa214538 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB tile"
 	depends on REALVIEW_EB_ARM11MP
-	default n
 	help
 	  Enable support for the ARM11MPCore RevB tile on the Realview
 	  platform. Since there are device address differences, a
@@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176
 	help
 	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
 
+config REALVIEW_PB1176_SECURE_FLASH
+	bool "Allow access to the secure flash memory block"
+	depends on MACH_REALVIEW_PB1176
+	default n
+	help
+	  Select this option if Linux will only run in secure mode on the
+	  RealView PB1176 platform and access to the secure flash memory
+	  block (64MB @ 0x3c000000) is required.
+
 config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
@@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
 	  PCI-E and Compact Flash.
 
+config MACH_REALVIEW_PBX
+	bool "Support RealView/PBX platform"
+	select ARM_GIC
+	select HAVE_PATA_PLATFORM
+	help
+	  Include support for the ARM(R) RealView PBX platform.
+
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
 	depends on !MACH_REALVIEW_PB1176
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ffc4b5..e704edb733c 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 076acbc5070..9ea9c05093c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
 #include "core.h"
 #include "clock.h"
 
@@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt)
 {
 	unsigned long flags;
 	u32 val;
+	u32 led = 1 << smp_processor_id();
 
 	local_irq_save(flags);
 	val = readl(VA_LEDS_BASE);
 
 	switch (ledevt) {
 	case led_idle_start:
-		val = val & ~REALVIEW_SYS_LED0;
+		val = val & ~led;
 		break;
 
 	case led_idle_end:
-		val = val | REALVIEW_SYS_LED0;
+		val = val | led;
 		break;
 
 	case led_timer:
-		val = val ^ REALVIEW_SYS_LED1;
+		val = val ^ REALVIEW_SYS_LED7;
 		break;
 
 	case led_halted:
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c08637683..59a337ba4be 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d7701fa9..794a8d91a6a 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 858eea7b1ad..98f8e7eeacc 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -32,6 +32,8 @@
 #define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
 #define REALVIEW_PB1176_FLASH_BASE		0x30000000
 #define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
 
 #define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
 #define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
@@ -71,82 +73,4 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7a126..f0d68e0fea0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b16e5..4dfc67a4f45 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START			32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
new file mode 100644
index 00000000000..848bfff6d8f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
+#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
+#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
+#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
+#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
+#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE		0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE		0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
+#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK          0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
+#define REALVIEW_PBX_PROC_ARM9          0x02000000
+#define REALVIEW_PBX_PROC_ARM11         0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
+#define REALVIEW_PBX_PROC_A9MP          0x0C000000
+#define REALVIEW_PBX_PROC_A8            0x0E000000
+
+#define check_pbx_proc(proc_type)                                            \
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+	== proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp()     0
+#define core_tile_pbxa9mp()     0
+#define core_tile_pbxa8()       0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 92dbcb9e179..932d8af1806 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -12,7 +12,8 @@
 
 #if defined(CONFIG_MACH_REALVIEW_EB) || \
     defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8)
+    defined(CONFIG_MACH_REALVIEW_PBA8) || \
+    defined(CONFIG_MACH_REALVIEW_PBX)
 #ifndef DEBUG_LL_UART_OFFSET
 #define DEBUG_LL_UART_OFFSET	0x00009000
 #elif DEBUG_LL_UART_OFFSET != 0x00009000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 00000000000..204d5378f30
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 00000000000..2410d4f8ddd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 00000000000..34e255add21
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 00000000000..86792a9f2ab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 00000000000..deaad4302b1
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START			32
+
+/* L220
+#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
+#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
+#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC		-1
+#define IRQ_PBX_SCTL		-1
+
+#define NR_GIC_PBX		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBX
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBX */
+
+#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index fe5cb987aa2..78854f2fa32 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,10 +22,11 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d645a..00000000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 415d634d52a..83050378ffd 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -24,6 +24,7 @@
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
 #include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
@@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void)
 		return REALVIEW_PB1176_UART0_BASE;
 	else if (machine_is_realview_pba8())
 		return REALVIEW_PBA8_UART0_BASE;
+	else if (machine_is_realview_pbx())
+		return REALVIEW_PBX_UART0_BASE;
 	else
 		return 0;
 }
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 1c01d13460f..60b4e111f45 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,196 +9,18 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
 
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
-	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
-	clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
-				      struct clock_event_device *unused)
-{
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
-	return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
-	unsigned long load, count;
-	u64 waitjiffies;
-
-	/*
-	 * If this is the first time round, we need to work out how fast
-	 * the timer ticks
-	 */
-	if (mpcore_timer_rate == 0) {
-		printk("Calibrating local timer... ");
-
-		/* Wait for a tick to start */
-		waitjiffies = get_jiffies_64() + 1;
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		/* OK, now the tick has started, let's get the timer going */
-		waitjiffies += 5;
-
-				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
-				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
-		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
-		printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
-			(mpcore_timer_rate / 100000) % 100);
-	}
-
-	load = mpcore_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
 
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-	unsigned long flags;
-
-	twd_calibrate_rate();
-
-	clk->name		= "local_timer";
-	clk->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	clk->rating		= 350;
-	clk->set_mode		= local_timer_set_mode;
-	clk->set_next_event	= local_timer_set_next_event;
-	clk->irq		= IRQ_LOCALTIMER;
-	clk->cpumask		= cpumask_of(cpu);
-	clk->shift		= 20;
-	clk->mult		= div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns	= clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns	= clockevent_delta2ns(0xf, clk);
-
-	/* Make sure our local interrupt controller has this enabled */
-	local_irq_save(flags);
-	get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
-	local_irq_restore(flags);
-
-	clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
 }
-
-#else	/* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
-	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 400;
-	clk->mult               = 1;
-	clk->set_mode		= dummy_timer_set_mode;
-	clk->broadcast		= smp_timer_broadcast;
-	clk->cpumask		= cpumask_of(cpu);
-
-	clockevents_register_device(clk);
-}
-
-#endif	/* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 30a9c68591f..ac0e83f1cc3 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,12 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
+#include <asm/localtimer.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
 
 #include "core.h"
 
@@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void)
 		return __io_address(REALVIEW_EB11MP_SCU_BASE);
 	else if (machine_is_realview_pb11mp())
 		return __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else if (machine_is_realview_pbx() &&
+		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
 	else
 		return (void __iomem *)0;
 }
 
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
 {
-	unsigned int ncores;
 	void __iomem *scu_base = scu_base_addr();
-
-	if (scu_base) {
-		ncores = __raw_readl(scu_base + SCU_CONFIG);
-		ncores = (ncores & 0x03) + 1;
-	} else
-		ncores = 1;
-
-	return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
-	u32 scu_ctrl;
-	void __iomem *scu_base = scu_base_addr();
-
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -184,7 +170,7 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-	/*
-	 * Enable the local timer or broadcast device for the boot CPU.
-	 */
-	local_timer_setup();
-#endif
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
 	for (i = 0; i < max_cpus; i++)
-		cpu_set(i, cpu_present_map);
+		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU if there are more than one CPU and let
@@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * WFI
 	 */
 	if (max_cpus > 1) {
-		scu_enable();
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
 		poke_milo();
 	}
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef122b..8dfa44e08a9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a64b84a7a3d..25efe71a67c 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = {
 /*
  * RealView PB1176 platform devices
  */
-static struct resource realview_pb1176_flash_resource = {
-	.start			= REALVIEW_PB1176_FLASH_BASE,
-	.end			= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_FLASH_BASE,
+		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
+		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
 };
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS	2
+#else
+#define PB1176_FLASH_BLOCKS	1
+#endif
 
 static struct resource realview_pb1176_smsc911x_resources[] = {
 	[0] = {
@@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void)
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
-	realview_flash_register(&realview_pb1176_flash_resource, 1);
+	realview_flash_register(realview_pb1176_flash_resources,
+				PB1176_FLASH_BLOCKS);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60eca35..dc4b1694390 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
new file mode 100644
index 00000000000..1fe294d0bf9
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -0,0 +1,335 @@
+/*
+ *  arch/arm/mach-realview/realview_pbx.c
+ *
+ *  Copyright (C) 2009 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_PCI
+	{
+		.virtual	= PCIX_UNIT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
+		.type		= MT_DEVICE,
+	},
+#endif
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+	{
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+		.length         = SZ_8K,
+		.type           = MT_DEVICE,
+	}
+};
+
+static void __init realview_pbx_map_io(void)
+{
+	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA	{ 0, 0 }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA		{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA		{ 15, 14 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA		{ 13, 12 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA		{ 11, 10 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA		{ 0x86, 0x87 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+	[0] = {
+		.start          = REALVIEW_PBX_FLASH0_BASE,
+		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = REALVIEW_PBX_FLASH1_BASE,
+		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_ETH_BASE,
+		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_ETH,
+		.end		= IRQ_PBX_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_USB_BASE,
+		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_USB,
+		.end		= IRQ_PBX_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM PBX on-board GIC */
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+			      29);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+	} else {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+			      IRQ_PBX_GIC_START);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+	}
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+	realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+	.init		= realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	if (core_tile_pbxa9mp()) {
+		void __iomem *l2x0_base =
+			__io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+		/* set RAM latencies to 1 cycle for eASIC */
+		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+		/* 16KB way size, 8-way associativity, parity disabled
+		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+	}
+#endif
+
+	realview_flash_register(realview_pbx_flash_resources,
+				ARRAY_SIZE(realview_pbx_flash_resources));
+	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pbx_isp1761_resources);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= realview_pbx_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pbx_timer,
+	.init_machine	= realview_pbx_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed4174c8..6c68e78f359 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+		return -EINVAL;  /* not valid interrupts */
 
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
 
 EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63a30d1dd42..41bb65d5b91 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -59,6 +59,7 @@ config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410
 	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -70,6 +71,7 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -82,6 +84,7 @@ config ARCH_BAST
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -89,6 +92,7 @@ config ARCH_BAST
 config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -96,6 +100,7 @@ config MACH_AML_M5900
 	bool "AML M5900 Series"
 	select CPU_S3C2410
 	select PM_SIMTEC if PM
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the American Microsystems M5900 Series
            <http://www.amltd.com>
@@ -111,6 +116,7 @@ config BAST_PC104_IRQ
 config MACH_TCT_HAMMER
 	bool "TCT Hammer Board"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the TinCanTools Hammer Board
            <http://www.tincantools.com>
@@ -122,12 +128,14 @@ config MACH_VR1000
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
 config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 440c014e24b..dbf96e60d99 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132f39e..7974afca297 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long flags;
 	unsigned long val;
 
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
+	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+		return -EINVAL;
 
 	config &= 0xff;
 
-	pin -= S3C2410_GPG8;
+	pin -= S3C2410_GPG(8);
 	reg += pin & ~3;
 
 	local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186..5aabf117cbb 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 
 		state = 1;
 	}
@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
 		led_trigger_event(bt_led_trigger, 0);
 #endif
 
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 
@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
 #ifdef CONFIG_LEDS_H1940
 	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 13358ce2128..c3a2629e0de 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -3,7 +3,7 @@
  * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
+#include <plat/dma.h>
 #include <linux/sysdev.h>
-#include <mach/hardware.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
@@ -55,9 +55,9 @@ enum dma_ch {
 
 /* we have 4 dma channels */
 #ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
+#define S3C_DMA_CHANNELS		(4)
 #else
-#define S3C2410_DMA_CHANNELS		(6)
+#define S3C_DMA_CHANNELS		(6)
 #endif
 
 /* types */
@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
 	S3C2410_DMA_PAUSED
 };
 
-
 /* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
@@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
 	S3C2410_DMALOAD_1LOADED_1RUNNING,
 };
 
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
 
 /* flags */
 
@@ -139,17 +112,14 @@ enum s3c2410_chan_op {
 
 /* dma buffer */
 
-struct s3c2410_dma_client {
-	char                *name;
-};
+struct s3c2410_dma_buf;
 
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf;
 struct s3c2410_dma_buf {
 	struct s3c2410_dma_buf	*next;
 	int			 magic;		/* magic */
@@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
 
 /* [1] is this updated for both recv/send modes? */
 
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
 struct s3c2410_dma_stats {
 	unsigned long		loads;
 	unsigned long		timeout_longest;
@@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
 
 	/* channel configuration */
 	enum s3c2410_dmasrc	 source;
+	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
 	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
 
 	struct s3c24xx_dma_map	*map;		/* channel hw maps */
 
@@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
 	struct sys_device	dev;
 };
 
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
 
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb99ef1..8fe192081d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG10)
+	if (pin > S3C2410_GPG(10))
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
new file mode 100644
index 00000000000..801dff13858
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index ce1ec69806a..2edbb9c88ab 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -11,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
 #define S3C2410_GPIO_BANKA   (32*0)
@@ -21,3 +24,70 @@
 #define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0	S3C2410_GPA(0)
+#define S3C2410_GPA1	S3C2410_GPA(1)
+#define S3C2410_GPA3	S3C2410_GPA(3)
+#define S3C2410_GPA7	S3C2410_GPA(7)
+
+#define S3C2410_GPE0	S3C2410_GPE(0)
+#define S3C2410_GPE1	S3C2410_GPE(1)
+#define S3C2410_GPE2	S3C2410_GPE(2)
+#define S3C2410_GPE3	S3C2410_GPE(3)
+#define S3C2410_GPE4	S3C2410_GPE(4)
+#define S3C2410_GPE5	S3C2410_GPE(5)
+#define S3C2410_GPE6	S3C2410_GPE(6)
+#define S3C2410_GPE7	S3C2410_GPE(7)
+#define S3C2410_GPE8	S3C2410_GPE(8)
+#define S3C2410_GPE9	S3C2410_GPE(9)
+#define S3C2410_GPE10	S3C2410_GPE(10)
+
+#define S3C2410_GPH10	S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 51a88cf9526..15f0b3e7ce6 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -24,5 +24,6 @@
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
 
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a4024..aef5631eac5 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -15,101 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 255fdfeaf95..e99b212cb1c 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -84,7 +84,6 @@
 
 #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
 #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
@@ -102,6 +101,7 @@
 
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 35a03df473f..b278d0c45cc 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,104 +69,58 @@
 #define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -194,107 +148,69 @@
 
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 #define S3C2400_GPB11_INP    (0x00 << 22)
 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 #define S3C2400_GPB12_INP    (0x00 << 24)
 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 #define S3C2400_GPB13_INP    (0x00 << 26)
 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 #define S3C2400_GPB14_INP    (0x00 << 28)
 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 #define S3C2400_GPB15_INP    (0x00 << 30)
 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 #define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -315,99 +231,51 @@
 #define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -432,99 +300,51 @@
 #define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -550,34 +370,22 @@
 #define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -585,9 +393,6 @@
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -595,81 +400,48 @@
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -705,55 +477,31 @@
 #define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -778,117 +526,69 @@
 #define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -907,62 +607,29 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index b8687f71c30..6faadcee772 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,21 +11,13 @@
 */
 
 #include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
 
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
 arch_reset(char mode, const char *cmd)
 {
-	struct clk *wdtclk;
-
 	if (mode == 's') {
 		cpu_reset(0);
 	}
@@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
 	if (s3c24xx_reset_hook)
 		s3c24xx_reset_hook();
 
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
+	arch_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995afeb4..06a84adfb13 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
-		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
 static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8637dea5e15..ce3baba2cd7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -591,8 +592,6 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
-	usb_simtec_init();
 }
 
 static void __init bast_init(void)
@@ -607,6 +606,7 @@ static void __init bast_init(void)
 	i2c_register_board_info(0, bast_i2c_devs,
 				ARRAY_SIZE(bast_i2c_devs));
 
+	usb_simtec_init();
 	nor_simtec_init();
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da4c25..d9cd5ddecf4 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.udc_command		= h1940_udc_pullup,
-	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 2b83f870771..0f6ed61af41 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.udc_command		= n30_udc_pullup,
-	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Thumbwheel Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Thumbwheel Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Thumbwheel Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Joystick Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG6,
+		.gpio		= S3C2410_GPG(6),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG5,
+		.gpio		= S3C2410_GPG(5),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Joystick Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF3,
+		.gpio		= S3C2410_GPF(3),
 		.code		= SW_RADIO,
 		.desc		= "GPS Antenna",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG2,
+		.gpio		= S3C2410_GPG(2),
 		.code		= SW_HEADPHONE_INSERT,
 		.desc		= "Headphone",
 		.active_low	= 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG6,
+	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
 	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD9,
+	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9f1ba9b63f7..2cc9849eb44 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
 /* LED */
 
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
 		break;
 	}
 }
 
 static struct s3c2410_spigpio_info spi_gpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
+	.pin_clk	= S3C2410_GPG(7),
+	.pin_mosi	= S3C2410_GPG(6),
+	.pin_miso	= S3C2410_GPG(5),
 	.chip_select	= &spi_gpio_cs,
 };
 
@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9c5c5..1628cc773a2 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
 
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB1,
+	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB2,
+	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 87fc481d92d..143e08a599d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
 	}
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
 }
 
@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2410_GSTATUS2);
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d97e2..6cd9377ddb8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -18,9 +18,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/gpio.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -29,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+		gpio_set_value(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+		gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+	int ret;
+
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index ca99564ae4b..63586ffd0ae 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -38,6 +38,7 @@ menu "S3C2412 Machines"
 config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -50,6 +51,7 @@ config MACH_SMDK2413
 	select CPU_S3C2412
 	select MACH_S3C2413
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -72,6 +74,7 @@ config MACH_SMDK2412
 config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 9e3478506c6..f8d16fc10bc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8f0d37d43b4..8df506eac90 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
-	.pin_clk	= S3C2410_GPG8,
-	.pin_mosi	= S3C2410_GPB8,
+	.pin_clk	= S3C2410_GPG(8),
+	.pin_mosi	= S3C2410_GPB(8),
 	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
-	.pin_clk	= S3C2410_GPB4,
-	.pin_mosi	= S3C2410_GPB9,
+	.pin_clk	= S3C2410_GPB(4),
+	.pin_mosi	= S3C2410_GPB(9),
 	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
 };
 
 /* Jive power management device */
@@ -529,8 +530,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index eba66aa6bd2..9a5e4341972 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cde5ae9a434..5df73cbf2b4 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -43,6 +44,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -58,12 +60,14 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -76,6 +80,7 @@ config SMDK2440_CPU2440
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 69b6cf34df4..e08e081430f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 9c6abf9fb54..68f3870991b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e3127..dfc7010935d 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa972d7f..d43edede590 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a46685ce3..cba064b49a6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 8430e582918..397f3b5c0b4 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 6da82b5c09b..f5af212066c 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -5,4 +5,27 @@
 #
 # Licensed under GPLv2
 
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6400 CPU support
+
+config S3C6400_SETUP_SDHCI
+	bool
+	help
+	  Internal configuration for default SDHCI
+	  setup for S3C6400.
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C6400_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 8f397db25b8..df1ce4aa03e 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -12,4 +12,12 @@ obj-				:=
 
 # Core support for S3C6400 system
 
-obj-n				+= blank.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 9771ac2cb07..1067619f0ba 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -11,6 +11,63 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+	/* we will be supporting ciruclar buffers as soon as we have DMA
+	 * engine support.
+	 */
+	return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 8199972ed5b..5057d9948d3 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -39,6 +39,8 @@
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
@@ -57,6 +59,8 @@
 #define S3C64XX_PA_MODEM	(0x74108000)
 #define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
 
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -69,5 +73,7 @@
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
new file mode 100644
index 00000000000..a6c7f4eb3a1
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 090cfd969bc..2e58cb7a714 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <plat/watchdog-reset.h>
+
 static void arch_idle(void)
 {
 	/* nothing here yet */
@@ -18,7 +20,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	cpu_reset(0);
 }
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
new file mode 100644
index 00000000000..ab19285389a
--- /dev/null
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
new file mode 100644
index 00000000000..1ece887d90b
--- /dev/null
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -0,0 +1,89 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
new file mode 100644
index 00000000000..b93dafbee1f
--- /dev/null
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d501007002..e63aac7f4e5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -16,9 +16,18 @@ config CPU_S3C6410
 
 config S3C6410_SETUP_SDHCI
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal helper functions for S3C6410 based SDHCI systems
 
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
@@ -26,6 +35,8 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
 	select S3C6410_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
@@ -60,3 +71,29 @@ config SMDK6410_SD_CH1
 	  channels 0 and 1 are the same.
 
 endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 2cd4f189036..6f9deac8861 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 
 # machine support
 
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+
+
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 6a73ca6b7a3..ade904de889 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -31,6 +31,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c24xx_register_baseclocks(xtal);
 	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
+	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
new file mode 100644
index 00000000000..661cca63de2
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
new file mode 100644
index 00000000000..6030636f854
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e47e4f..bc9a7dea567 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -24,6 +24,12 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/smsc911x.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
 
 #include <video/platform_lcd.h>
 
@@ -39,8 +45,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
 
 #include <plat/s3c6410.h>
 #include <plat/clock.h>
@@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = 0x18000000,
+		.end   = 0x18000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_usb_hsotg,
 	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+	.consumer_supplies = dcdc6_consumers,
 };
 
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.always_on = 1,
+	},
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
+	{ WM8350_LDO_1, &wm8350_ldo1_data },
+	{ WM8350_LDO_2, &wm8350_ldo2_data },
+	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+};
+#endif
+
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {
@@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 
 static void __init smdk6410_map_io(void)
 {
+	u32 tmp;
+
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
 }
 
 static void __init smdk6410_machine_init(void)
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 0b5788bd598..20666f3bd47 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -21,8 +21,6 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
@@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	/* [3] = "48m", - note not succesfully used yet */
 };
 
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
 
 void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 				    void __iomem *r,
@@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
deleted file mode 100644
index 444f266ecc0..00000000000
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Based on spitz_pm.c and sharp code.
- *
- * Copyright (C) 2001  SHARP
- * Copyright 2005 Pavel Machek <pavel@suse.cz>
- *
- * Distribute under GPLv2.
- *
- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
- * and sometimes charges them when it should not. If it makes angry lithium to come your way...
- * ...well, you have been warned.
- *
- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
- * and my collie did not explode (yet).
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
-#include <mach/dma.h>
-#include <mach/collie.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-#include "../drivers/mfd/ucb1x00.h"
-
-static struct ucb1x00 *ucb;
-static int ad_revise;
-
-#define ADCtoPower(x)	       ((330 * x * 2) / 1024)
-
-static void collie_charger_init(void)
-{
-	int err;
-
-	if (sharpsl_param.adadj != -1)
-		ad_revise = sharpsl_param.adadj;
-
-	/* Register interrupt handler. */
-	if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
-			       "ACIN", sharpsl_ac_isr))) {
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
-		return;
-	}
-	if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
-			       "CO", sharpsl_chrg_full_isr))) {
-		free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
-		return;
-	}
-
-	gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
-	gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
-
-	ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
-			           COLLIE_TC35143_GPIO_BBAT_ON);
-	return;
-}
-
-static void collie_measure_temp(int on)
-{
-	if (on)
-		ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	else
-		ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-}
-
-static void collie_charge(int on)
-{
-	/* Zaurus seems to contain LTC1731; it should know when to
-	 * stop charging itself, so setting charge on should be
-	 * relatively harmless (as long as it is not done too often).
-	 */
-	gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
-}
-
-static void collie_discharge(int on)
-{
-}
-
-static void collie_discharge1(int on)
-{
-}
-
-static void collie_presuspend(void)
-{
-}
-
-static void collie_postsuspend(void)
-{
-}
-
-static int collie_should_wakeup(unsigned int resume_on_alarm)
-{
-	return 0;
-}
-
-static unsigned long collie_charger_wakeup(void)
-{
-	return 0;
-}
-
-int collie_read_backup_battery(void)
-{
-	int voltage;
-
-	ucb1x00_adc_enable(ucb);
-
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage);
-
-	return ADCtoPower(voltage);
-}
-
-int collie_read_main_battery(void)
-{
-	int voltage, voltage_rev, voltage_volts;
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-
-	mdelay(1);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	voltage_rev = voltage + ((ad_revise * voltage) / 652);
-	voltage_volts = ADCtoPower(voltage_rev);
-
-	printk("Main battery = %d(%d)\n", voltage_volts, voltage);
-
-	if (voltage != -1)
-		return voltage_volts;
-	else
-		return voltage;
-}
-
-int collie_read_temp(void)
-{
-	int voltage;
-
-	/* According to Sharp, temp must be > 973, main battery must be < 465,
-	   FIXME: sharpsl_pm.c has both conditions negated? FIXME: values
-	   are way out of range? */
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	/* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Battery temp = %d\n", voltage);
-	return voltage;
-}
-
-static unsigned long read_devdata(int which)
-{
-	switch (which) {
-	case SHARPSL_BATT_VOLT:
-		return collie_read_main_battery();
-	case SHARPSL_BATT_TEMP:
-		return collie_read_temp();
-	case SHARPSL_ACIN_VOLT:
-		return 500;
-	case SHARPSL_STATUS_ACIN: {
-		int ret = GPLR & COLLIE_GPIO_AC_IN;
-		printk("AC status = %d\n", ret);
-		return ret;
-	}
-	case SHARPSL_STATUS_FATAL: {
-		int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW;
-		printk("Fatal bat = %d\n", ret);
-		return ret;
-	}
-	default:
-		return ~0;
-	}
-}
-
-struct battery_thresh collie_battery_levels_acin[] = {
-	{ 420, 100},
-	{ 417,  95},
-	{ 415,  90},
-	{ 413,  80},
-	{ 411,  75},
-	{ 408,  70},
-	{ 406,  60},
-	{ 403,  50},
-	{ 398,  40},
-	{ 391,  25},
-	{  10,   5},
-	{   0,   0},
-};
-
-struct battery_thresh collie_battery_levels[] = {
-	{ 394, 100},
-	{ 390,  95},
-	{ 380,  90},
-	{ 370,  80},
-	{ 368,  75},	/* From sharp code: battery high with frontlight */
-	{ 366,  70},	/* 60..90 -- fake values invented by me for testing */
-	{ 364,  60},
-	{ 362,  50},
-	{ 360,  40},
-	{ 358,  25},	/* From sharp code: battery low with frontlight */
-	{ 356,   5},	/* From sharp code: battery verylow with frontlight */
-	{   0,   0},
-};
-
-struct sharpsl_charger_machinfo collie_pm_machinfo = {
-	.init             = collie_charger_init,
-	.read_devdata	  = read_devdata,
-	.discharge        = collie_discharge,
-	.discharge1       = collie_discharge1,
-	.charge           = collie_charge,
-	.measure_temp     = collie_measure_temp,
-	.presuspend       = collie_presuspend,
-	.postsuspend      = collie_postsuspend,
-	.charger_wakeup   = collie_charger_wakeup,
-	.should_wakeup    = collie_should_wakeup,
-	.bat_levels       = 12,
-	.bat_levels_noac  = collie_battery_levels,
-	.bat_levels_acin  = collie_battery_levels_acin,
-	.status_high_acin = 368,
-	.status_low_acin  = 358,
-	.status_high_noac = 368,
-	.status_low_noac  = 358,
-	.charge_on_volt	  = 350,	/* spitz uses 2.90V, but lets play it safe. */
-	.charge_on_temp   = 550,
-	.charge_acin_high = 550,	/* collie does not seem to have sensor for this, anyway */
-	.charge_acin_low  = 450,	/* ignored, too */
-	.fatal_acin_volt  = 356,
-	.fatal_noacin_volt = 356,
-
-	.batfull_irq = 1,		/* We do not want periodical charge restarts */
-};
-
-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
-{
-	sharpsl_pm.machinfo = &collie_pm_machinfo;
-	ucb = pdev->ucb;
-	return 0;
-}
-
-static struct ucb1x00_driver collie_pm_ucb_driver = {
-	.add	= collie_pm_ucb_add,
-};
-
-static struct platform_device *collie_pm_device;
-
-static int __init collie_pm_init(void)
-{
-	int ret;
-
-	collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!collie_pm_device)
-		return -ENOMEM;
-
-	collie_pm_device->dev.platform_data = &collie_pm_machinfo;
-	ret = platform_device_add(collie_pm_device);
-
-	if (ret)
-		platform_device_put(collie_pm_device);
-
-	if (!ret)
-		ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
-
-	return ret;
-}
-
-static void __exit collie_pm_exit(void)
-{
-	ucb1x00_unregister_driver(&collie_pm_ucb_driver);
-	platform_device_unregister(collie_pm_device);
-}
-
-module_init(collie_pm_init);
-module_exit(collie_pm_exit);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 28cf3696797..506a5e5a9ad 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
  * timeout after <timeout> rounds. Needs mcu running before its called.
  *
  * returns : %mcu output on success
- *	   : %-ETIMEOUT on timeout
+ *	   : %-ETIMEDOUT on timeout
  */
 int jornada_ssp_byte(u8 byte)
 {
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
  * jornada_ssp_inout - decide if input is command or trading byte
  *
  * returns : (jornada_ssp_byte(byte)) on success
- *         : %-ETIMEOUT on timeout failure
+ *         : %-ETIMEDOUT on timeout failure
  */
 int jornada_ssp_inout(u8 byte)
 {
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
new file mode 100644
index 00000000000..d156f76b379
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
+obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..731a92286da
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x70]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x7f
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
new file mode 100644
index 00000000000..cc59673becd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/irqs.h
@@ -0,0 +1,95 @@
+/*
+ * Freescale STMP378X interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#define IRQ_DEBUG_UART			0
+#define IRQ_COMMS_RX			1
+#define IRQ_COMMS_TX			1
+#define IRQ_SSP2_ERROR			2
+#define IRQ_VDD5V			3
+#define IRQ_HEADPHONE_SHORT		4
+#define IRQ_DAC_DMA			5
+#define IRQ_DAC_ERROR			6
+#define IRQ_ADC_DMA			7
+#define IRQ_ADC_ERROR			8
+#define IRQ_SPDIF_DMA			9
+#define IRQ_SAIF2_DMA			9
+#define IRQ_SPDIF_ERROR			10
+#define IRQ_SAIF1_IRQ			10
+#define IRQ_SAIF2_IRQ			10
+#define IRQ_USB_CTRL			11
+#define IRQ_USB_WAKEUP			12
+#define IRQ_GPMI_DMA			13
+#define IRQ_SSP1_DMA			14
+#define IRQ_SSP_ERROR			15
+#define IRQ_GPIO0			16
+#define IRQ_GPIO1			17
+#define IRQ_GPIO2			18
+#define IRQ_SAIF1_DMA			19
+#define IRQ_SSP2_DMA			20
+#define IRQ_ECC8_IRQ			21
+#define IRQ_RTC_ALARM			22
+#define IRQ_UARTAPP_TX_DMA		23
+#define IRQ_UARTAPP_INTERNAL		24
+#define IRQ_UARTAPP_RX_DMA		25
+#define IRQ_I2C_DMA			26
+#define IRQ_I2C_ERROR			27
+#define IRQ_TIMER0			28
+#define IRQ_TIMER1			29
+#define IRQ_TIMER2			30
+#define IRQ_TIMER3			31
+#define IRQ_BATT_BRNOUT			32
+#define IRQ_VDDD_BRNOUT			33
+#define IRQ_VDDIO_BRNOUT		34
+#define IRQ_VDD18_BRNOUT		35
+#define IRQ_TOUCH_DETECT		36
+#define IRQ_LRADC_CH0			37
+#define IRQ_LRADC_CH1			38
+#define IRQ_LRADC_CH2			39
+#define IRQ_LRADC_CH3			40
+#define IRQ_LRADC_CH4			41
+#define IRQ_LRADC_CH5			42
+#define IRQ_LRADC_CH6			43
+#define IRQ_LRADC_CH7			44
+#define IRQ_LCDIF_DMA			45
+#define IRQ_LCDIF_ERROR			46
+#define IRQ_DIGCTL_DEBUG_TRAP		47
+#define IRQ_RTC_1MSEC			48
+#define IRQ_DRI_DMA			49
+#define IRQ_DRI_ATTENTION		50
+#define IRQ_GPMI_ATTENTION		51
+#define IRQ_IR				52
+#define IRQ_DCP_VMI			53
+#define IRQ_DCP				54
+#define IRQ_BCH				56
+#define IRQ_PXP				57
+#define IRQ_UARTAPP2_TX_DMA		58
+#define IRQ_UARTAPP2_INTERNAL		59
+#define IRQ_UARTAPP2_RX_DMA		60
+#define IRQ_VDAC_DETECT			61
+#define IRQ_VDD5V_DROOP			64
+#define IRQ_DCDC4P2_BO			65
+
+
+#define NR_REAL_IRQS	128
+#define NR_IRQS		(NR_REAL_IRQS + 32 * 3)
+
+/* All interrupts are FIQ capable */
+#define FIQ_START		IRQ_DEBUG_UART
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
new file mode 100644
index 00000000000..93f952d3596
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/pins.h
@@ -0,0 +1,151 @@
+/*
+ * Freescale STMP378X SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_CLE		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_ALE		STMP3XXX_PINID(0, 17)
+#define PINID_GMPI_CE2N		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY1		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_WPN		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_AUART1_CTS	STMP3XXX_PINID(0, 26)
+#define PINID_AUART1_RTS	STMP3XXX_PINID(0, 27)
+#define PINID_AUART1_RX		STMP3XXX_PINID(0, 28)
+#define PINID_AUART1_TX		STMP3XXX_PINID(0, 29)
+#define PINID_I2C_SCL		STMP3XXX_PINID(0, 30)
+#define PINID_I2C_SDA		STMP3XXX_PINID(0, 31)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_D16		STMP3XXX_PINID(1, 16)
+#define PINID_LCD_D17		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_RESET		STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_WR		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 21)
+#define PINID_LCD_DOTCK		STMP3XXX_PINID(1, 22)
+#define PINID_LCD_ENABLE	STMP3XXX_PINID(1, 23)
+#define PINID_LCD_HSYNC		STMP3XXX_PINID(1, 24)
+#define PINID_LCD_VSYNC		STMP3XXX_PINID(1, 25)
+#define PINID_PWM0		STMP3XXX_PINID(1, 26)
+#define PINID_PWM1		STMP3XXX_PINID(1, 27)
+#define PINID_PWM2		STMP3XXX_PINID(1, 28)
+#define PINID_PWM3		STMP3XXX_PINID(1, 29)
+#define PINID_PWM4		STMP3XXX_PINID(1, 30)
+
+/* Bank 2 */
+#define PINID_SSP1_CMD		STMP3XXX_PINID(2, 0)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(2, 1)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(2, 2)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(2, 3)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(2, 4)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(2, 5)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(2, 6)
+#define PINID_ROTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_BA0		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_BA1		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 26)
+#define PINID_GPMI_CE1N		STMP3XXX_PINID(2, 27)
+#define PINID_GPMI_CE0N		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..dbcf85b6ac2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
@@ -0,0 +1,101 @@
+/*
+ * stmp378x: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+#define REGS_APBH_PHYS	0x80004000
+#define REGS_APBH_SIZE	0x2000
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_CTRL2		0x20
+
+#define HW_APBH_DEVSEL		0x30
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBH_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBH_CHn_CMD_COMMAND	0x00000003
+#define BP_APBH_CHn_CMD_COMMAND	0
+#define BM_APBH_CHn_CMD_CHAIN	0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..3b934a4d27f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
@@ -0,0 +1,119 @@
+/*
+ * stmp378x: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+#define REGS_APBX_PHYS	0x80024000
+#define REGS_APBX_SIZE	0x2000
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_CTRL2		0x20
+
+#define HW_APBX_CHANNEL_CTRL	0x30
+#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL	0xFFFF0000
+#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL	16
+
+#define HW_APBX_DEVSEL		0x40
+
+#define HW_APBX_CH0_NXTCMDAR	(0x110 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x110 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x110 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x110 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x110 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x110 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x110 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x110 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x110 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x110 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x110 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x110 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x110 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x110 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x110 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x110 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x110
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBX_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_HALTONTERMINATE	0x00000100
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x130 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x130 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x130 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x130 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x130 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x130 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x130 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x130 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x130 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x130 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x130 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x130 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x130 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x130 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x130 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x130 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x130
+
+#define HW_APBX_CH0_SEMA	(0x140 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x140 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x140 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x140 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x140 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x140 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x140 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x140 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x140 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x140 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x140 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x140 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x140 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x140 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x140 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x140 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x140
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
+
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..641ac6126f8
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+#define REGS_AUDIOIN_PHYS	0x8004C000
+#define REGS_AUDIOIN_SIZE	0x2000
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..f533e23694a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
@@ -0,0 +1,104 @@
+/*
+ * stmp378x: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+#define REGS_AUDIOOUT_PHYS	0x80048000
+#define REGS_AUDIOOUT_SIZE	0x2000
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_SPEAKER	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_SPEAKERCTRL	0x100
+#define BM_AUDIOOUT_SPEAKERCTRL_MUTE	0x01000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
new file mode 100644
index 00000000000..532d2465071
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
@@ -0,0 +1,56 @@
+/*
+ * stmp378x: BCH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_BCH_BASE	(STMP3XXX_REGS_BASE + 0xA000)
+#define REGS_BCH_PHYS	0x8000A000
+#define REGS_BCH_SIZE	0x2000
+
+#define HW_BCH_CTRL		0x0
+#define BM_BCH_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_BCH_CTRL_COMPLETE_IRQ	0
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN	0x00000100
+
+#define HW_BCH_STATUS0		0x10
+#define BM_BCH_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_BCH_STATUS0_CORRECTED	0x00000008
+#define BM_BCH_STATUS0_STATUS_BLK0	0x0000FF00
+#define BP_BCH_STATUS0_STATUS_BLK0	8
+#define BM_BCH_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_BCH_STATUS0_COMPLETED_CE	16
+
+#define HW_BCH_LAYOUTSELECT	0x70
+
+#define HW_BCH_FLASH0LAYOUT0	0x80
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE	0
+#define BM_BCH_FLASH0LAYOUT0_ECC0	0x0000F000
+#define BP_BCH_FLASH0LAYOUT0_ECC0	12
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	0x00FF0000
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE	16
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	0xFF000000
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS	24
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE	0
+#define BM_BCH_FLASH0LAYOUT1_ECCN	0x0000F000
+#define BP_BCH_FLASH0LAYOUT1_ECCN	12
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE	0xFFFF0000
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE	16
+
+#define HW_BCH_BLOCKNAME	0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..7c546afd57a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp378x: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+#define REGS_CLKCTRL_PHYS	0x80040000
+#define REGS_CLKCTRL_SIZE	0x2000
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00000FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_TV		0xD0
+
+#define HW_CLKCTRL_ETM		0xE0
+
+#define HW_CLKCTRL_FRAC		0xF0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_FRAC1	0x100
+
+#define HW_CLKCTRL_CLKSEQ	0x110
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0x120
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
new file mode 100644
index 00000000000..fdedd00c0e2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: DCP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DCP_BASE	(STMP3XXX_REGS_BASE + 0x28000)
+#define REGS_DCP_PHYS	0x80028000
+#define REGS_DCP_SIZE	0x2000
+
+#define HW_DCP_CTRL		0x0
+#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0x000000FF
+#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0
+#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING	0x00400000
+#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES	0x00800000
+#define BM_DCP_CTRL_CLKGATE	0x40000000
+#define BM_DCP_CTRL_SFTRST	0x80000000
+
+#define HW_DCP_STAT		0x10
+#define BM_DCP_STAT_IRQ		0x0000000F
+#define BP_DCP_STAT_IRQ		0
+
+#define HW_DCP_CHANNELCTRL	0x20
+#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL	0x000000FF
+#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL	0
+
+#define HW_DCP_CONTEXT		0x50
+#define BM_DCP_PACKET1_INTERRUPT	0x00000001
+#define BP_DCP_PACKET1_INTERRUPT	0
+#define BM_DCP_PACKET1_DECR_SEMAPHORE	0x00000002
+#define BM_DCP_PACKET1_CHAIN	0x00000004
+#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS	0x00000008
+#define BM_DCP_PACKET1_ENABLE_CIPHER	0x00000020
+#define BM_DCP_PACKET1_ENABLE_HASH	0x00000040
+#define BM_DCP_PACKET1_CIPHER_ENCRYPT	0x00000100
+#define BM_DCP_PACKET1_CIPHER_INIT	0x00000200
+#define BM_DCP_PACKET1_OTP_KEY	0x00000400
+#define BM_DCP_PACKET1_PAYLOAD_KEY	0x00000800
+#define BM_DCP_PACKET1_HASH_INIT	0x00001000
+#define BM_DCP_PACKET1_HASH_TERM	0x00002000
+#define BM_DCP_PACKET2_CIPHER_SELECT	0x0000000F
+#define BP_DCP_PACKET2_CIPHER_SELECT	0
+#define BM_DCP_PACKET2_CIPHER_MODE	0x000000F0
+#define BP_DCP_PACKET2_CIPHER_MODE	4
+#define BM_DCP_PACKET2_KEY_SELECT	0x0000FF00
+#define BP_DCP_PACKET2_KEY_SELECT	8
+#define BM_DCP_PACKET2_HASH_SELECT	0x000F0000
+#define BP_DCP_PACKET2_HASH_SELECT	16
+#define BM_DCP_PACKET2_CIPHER_CFG	0xFF000000
+#define BP_DCP_PACKET2_CIPHER_CFG	24
+
+#define HW_DCP_CH0CMDPTR	(0x100 + 0 * 0x40)
+#define HW_DCP_CH1CMDPTR	(0x100 + 1 * 0x40)
+#define HW_DCP_CH2CMDPTR	(0x100 + 2 * 0x40)
+#define HW_DCP_CH3CMDPTR	(0x100 + 3 * 0x40)
+
+#define HW_DCP_CHnCMDPTR	0x100
+
+#define HW_DCP_CH0SEMA		(0x110 + 0 * 0x40)
+#define HW_DCP_CH1SEMA		(0x110 + 1 * 0x40)
+#define HW_DCP_CH2SEMA		(0x110 + 2 * 0x40)
+#define HW_DCP_CH3SEMA		(0x110 + 3 * 0x40)
+
+#define HW_DCP_CHnSEMA		0x110
+#define BM_DCP_CHnSEMA_INCREMENT	0x000000FF
+#define BP_DCP_CHnSEMA_INCREMENT	0
+
+#define HW_DCP_CH0STAT		(0x120 + 0 * 0x40)
+#define HW_DCP_CH1STAT		(0x120 + 1 * 0x40)
+#define HW_DCP_CH2STAT		(0x120 + 2 * 0x40)
+#define HW_DCP_CH3STAT		(0x120 + 3 * 0x40)
+
+#define HW_DCP_CHnSTAT		0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..5293005523b
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
@@ -0,0 +1,38 @@
+/*
+ * stmp378x: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+#define REGS_DIGCTL_PHYS	0x8001C000
+#define REGS_DIGCTL_SIZE	0x2000
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
+
+#define HW_DIGCTL_ARMCACHE	0x2B0
+#define BM_DIGCTL_ARMCACHE_ITAG_SS	0x00000003
+#define BP_DIGCTL_ARMCACHE_ITAG_SS	0
+#define BM_DIGCTL_ARMCACHE_DTAG_SS	0x00000030
+#define BP_DIGCTL_ARMCACHE_DTAG_SS	4
+#define BM_DIGCTL_ARMCACHE_CACHE_SS	0x00000300
+#define BP_DIGCTL_ARMCACHE_CACHE_SS	8
+#define BM_DIGCTL_ARMCACHE_DRTY_SS	0x00003000
+#define BP_DIGCTL_ARMCACHE_DRTY_SS	12
+#define BM_DIGCTL_ARMCACHE_VALID_SS	0x00030000
+#define BP_DIGCTL_ARMCACHE_VALID_SS	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
new file mode 100644
index 00000000000..02851431677
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
@@ -0,0 +1,27 @@
+/*
+ * stmp378x: DRAM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRAM_BASE	(STMP3XXX_REGS_BASE + 0xE0000)
+#define REGS_DRAM_PHYS	0x800E0000
+#define REGS_DRAM_SIZE	0x2000
+
+#define HW_DRAM_CTL06		0x18
+
+#define HW_DRAM_CTL08		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
new file mode 100644
index 00000000000..da25f7e397e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: DRI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRI_BASE	(STMP3XXX_REGS_BASE + 0x74000)
+#define REGS_DRI_PHYS	0x80074000
+#define REGS_DRI_SIZE	0x2000
+
+#define HW_DRI_CTRL		0x0
+#define BM_DRI_CTRL_RUN		0x00000001
+#define BP_DRI_CTRL_RUN		0
+#define BM_DRI_CTRL_ATTENTION_IRQ	0x00000002
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ	0x00000004
+#define BM_DRI_CTRL_OVERFLOW_IRQ	0x00000008
+#define BM_DRI_CTRL_ATTENTION_IRQ_EN	0x00000200
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN	0x00000400
+#define BM_DRI_CTRL_OVERFLOW_IRQ_EN	0x00000800
+#define BM_DRI_CTRL_REACQUIRE_PHASE	0x00008000
+#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR	0x02000000
+#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR	0x04000000
+#define BM_DRI_CTRL_ENABLE_INPUTS	0x20000000
+#define BM_DRI_CTRL_CLKGATE	0x40000000
+#define BM_DRI_CTRL_SFTRST	0x80000000
+
+#define HW_DRI_TIMING		0x10
+#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL	0x000000FF
+#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL	0
+#define BM_DRI_TIMING_PILOT_REP_RATE	0x000F0000
+#define BP_DRI_TIMING_PILOT_REP_RATE	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..cc353bec331
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
@@ -0,0 +1,39 @@
+/*
+ * stmp378x: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+#define REGS_ECC8_PHYS	0x80008000
+#define REGS_ECC8_SIZE	0x2000
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
new file mode 100644
index 00000000000..98773fc33d7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
@@ -0,0 +1,25 @@
+/*
+ * stmp378x: EMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_EMI_BASE	(STMP3XXX_REGS_BASE + 0x20000)
+#define REGS_EMI_PHYS	0x80020000
+#define REGS_EMI_SIZE	0x2000
+
+#define HW_EMI_STAT		0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..2cc8bbe9168
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
@@ -0,0 +1,78 @@
+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY	12
+#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..13a234c9943
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp378x: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..f996e80f40e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+#define REGS_ICOLL_PHYS	0x80000000
+#define REGS_ICOLL_SIZE	0x2000
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+#define BM_ICOLL_LEVELACK_IRQLEVELACK	0x0000000F
+#define BP_ICOLL_LEVELACK_IRQLEVELACK	0
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x70
+
+#define HW_ICOLL_INTERRUPTn	0x120
+
+#define HW_ICOLL_INTERRUPTn	0x120
+#define BM_ICOLL_INTERRUPTn_ENABLE	0x00000004
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
index e22ba789546..a5b4ef10fab 100644
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
@@ -1,7 +1,8 @@
 /*
- *  linux/include/asm-arm/imx/timex.h
+ * stmp378x: IR register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,12 +16,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(16000000)
-
-#endif
+#define REGS_IR_BASE	(STMP3XXX_REGS_BASE + 0x78000)
+#define REGS_IR_PHYS	0x80078000
+#define REGS_IR_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..9cdbef4badc
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
@@ -0,0 +1,195 @@
+/*
+ * stmp378x: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_RUN	0x00000001
+#define BP_LCDIF_CTRL_RUN	0
+#define BM_LCDIF_CTRL_LCDIF_MASTER	0x00000020
+#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC	0x00000080
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00000300
+#define BP_LCDIF_CTRL_WORD_LENGTH	8
+#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH	0x00000C00
+#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH	10
+#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE	0x0000C000
+#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE	14
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00010000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00020000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00040000
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00080000
+#define BM_LCDIF_CTRL_DVI_MODE	0x00100000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x03E00000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	21
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x04000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x08000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+#define BM_LCDIF_CTRL1_INTERLACE_FIELDS	0x00800000
+#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW	0x01000000
+
+#define HW_LCDIF_TRANSFER_COUNT	0x20
+#define BM_LCDIF_TRANSFER_COUNT_H_COUNT	0x0000FFFF
+#define BP_LCDIF_TRANSFER_COUNT_H_COUNT	0
+#define BM_LCDIF_TRANSFER_COUNT_V_COUNT	0xFFFF0000
+#define BP_LCDIF_TRANSFER_COUNT_V_COUNT	16
+
+#define HW_LCDIF_CUR_BUF	0x30
+
+#define HW_LCDIF_NEXT_BUF	0x40
+
+#define HW_LCDIF_TIMING		0x60
+
+#define HW_LCDIF_VDCTRL0	0x70
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0x0003FFFF
+#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x80
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0xFFFFFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+
+#define HW_LCDIF_VDCTRL2	0x90
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x0003FFFF
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF000000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	24
+
+#define HW_LCDIF_VDCTRL3	0xA0
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x0000FFFF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x0FFF0000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	16
+
+#define HW_LCDIF_VDCTRL4	0xB0
+#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0x0003FFFF
+#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON	0x00040000
+
+#define HW_LCDIF_DVICTRL0	0xC0
+#define BM_LCDIF_DVICTRL0_V_LINES_CNT	0x000003FF
+#define BP_LCDIF_DVICTRL0_V_LINES_CNT	0
+#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT	0x000FFC00
+#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT	10
+#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT	0x7FF00000
+#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT	20
+
+#define HW_LCDIF_DVICTRL1	0xD0
+#define BM_LCDIF_DVICTRL1_F2_START_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL1_F2_START_LINE	0
+#define BM_LCDIF_DVICTRL1_F1_END_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL1_F1_END_LINE	10
+#define BM_LCDIF_DVICTRL1_F1_START_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL1_F1_START_LINE	20
+
+#define HW_LCDIF_DVICTRL2	0xE0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE	10
+#define BM_LCDIF_DVICTRL2_F2_END_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL2_F2_END_LINE	20
+
+#define HW_LCDIF_DVICTRL3	0xF0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE	0x03FF0000
+#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE	16
+
+#define HW_LCDIF_DVICTRL4	0x100
+#define BM_LCDIF_DVICTRL4_H_FILL_CNT	0x000000FF
+#define BP_LCDIF_DVICTRL4_H_FILL_CNT	0
+#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE	0x0000FF00
+#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE	8
+#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE	0x00FF0000
+#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE	16
+#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE	0xFF000000
+#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE	24
+
+#define HW_LCDIF_CSC_COEFF0	0x110
+#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0x00000003
+#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0
+#define BM_LCDIF_CSC_COEFF0_C0	0x03FF0000
+#define BP_LCDIF_CSC_COEFF0_C0	16
+
+#define HW_LCDIF_CSC_COEFF1	0x120
+#define BM_LCDIF_CSC_COEFF1_C1	0x000003FF
+#define BP_LCDIF_CSC_COEFF1_C1	0
+#define BM_LCDIF_CSC_COEFF1_C2	0x03FF0000
+#define BP_LCDIF_CSC_COEFF1_C2	16
+
+#define HW_LCDIF_CSC_COEFF2	0x130
+#define BM_LCDIF_CSC_COEFF2_C3	0x000003FF
+#define BP_LCDIF_CSC_COEFF2_C3	0
+#define BM_LCDIF_CSC_COEFF2_C4	0x03FF0000
+#define BP_LCDIF_CSC_COEFF2_C4	16
+
+#define HW_LCDIF_CSC_COEFF3	0x140
+#define BM_LCDIF_CSC_COEFF3_C5	0x000003FF
+#define BP_LCDIF_CSC_COEFF3_C5	0
+#define BM_LCDIF_CSC_COEFF3_C6	0x03FF0000
+#define BP_LCDIF_CSC_COEFF3_C6	16
+
+#define HW_LCDIF_CSC_COEFF4	0x150
+#define BM_LCDIF_CSC_COEFF4_C7	0x000003FF
+#define BP_LCDIF_CSC_COEFF4_C7	0
+#define BM_LCDIF_CSC_COEFF4_C8	0x03FF0000
+#define BP_LCDIF_CSC_COEFF4_C8	16
+
+#define HW_LCDIF_CSC_OFFSET	0x160
+#define BM_LCDIF_CSC_OFFSET_Y_OFFSET	0x000001FF
+#define BP_LCDIF_CSC_OFFSET_Y_OFFSET	0
+#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET	0x01FF0000
+#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET	16
+
+#define HW_LCDIF_CSC_LIMIT	0x170
+#define BM_LCDIF_CSC_LIMIT_Y_MAX	0x000000FF
+#define BP_LCDIF_CSC_LIMIT_Y_MAX	0
+#define BM_LCDIF_CSC_LIMIT_Y_MIN	0x0000FF00
+#define BP_LCDIF_CSC_LIMIT_Y_MIN	8
+#define BM_LCDIF_CSC_LIMIT_CBCR_MAX	0x00FF0000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MAX	16
+#define BM_LCDIF_CSC_LIMIT_CBCR_MIN	0xFF000000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MIN	24
+
+#define HW_LCDIF_STAT		0x1D0
+#define BM_LCDIF_STAT_TXFIFO_EMPTY	0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cb8cb06f827
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
@@ -0,0 +1,99 @@
+/*
+ * stmp378x: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+#define REGS_LRADC_PHYS	0x80050000
+#define REGS_LRADC_SIZE	0x2000
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
new file mode 100644
index 00000000000..f0af64d9937
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: OCOTP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_OCOTP_BASE	(STMP3XXX_REGS_BASE + 0x2C000)
+#define REGS_OCOTP_PHYS	0x8002C000
+#define REGS_OCOTP_SIZE	0x2000
+
+#define HW_OCOTP_CTRL		0x0
+#define BM_OCOTP_CTRL_BUSY	0x00000100
+#define BM_OCOTP_CTRL_ERROR	0x00000200
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	0x00001000
+#define BM_OCOTP_CTRL_RELOAD_SHADOWS	0x00002000
+#define BM_OCOTP_CTRL_WR_UNLOCK	0xFFFF0000
+#define BP_OCOTP_CTRL_WR_UNLOCK	16
+
+#define HW_OCOTP_DATA		0x10
+
+#define HW_OCOTP_CUST0		(0x20 + 0 * 0x10)
+#define HW_OCOTP_CUST1		(0x20 + 1 * 0x10)
+#define HW_OCOTP_CUST2		(0x20 + 2 * 0x10)
+#define HW_OCOTP_CUST3		(0x20 + 3 * 0x10)
+
+#define HW_OCOTP_CUSTn		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..50d90ea1b13
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
@@ -0,0 +1,90 @@
+/*
+ * stmp378x: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+#define REGS_PINCTRL_PHYS	0x80018000
+#define REGS_PINCTRL_SIZE	0x2000
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x400
+#define HW_PINCTRL_PULL1	0x410
+#define HW_PINCTRL_PULL2	0x420
+#define HW_PINCTRL_PULL3	0x430
+
+#define HW_PINCTRL_DOUT0	0x500
+#define HW_PINCTRL_DOUT1	0x510
+#define HW_PINCTRL_DOUT2	0x520
+
+#define HW_PINCTRL_DIN0		0x600
+#define HW_PINCTRL_DIN1		0x610
+#define HW_PINCTRL_DIN2		0x620
+
+#define HW_PINCTRL_DOE0		0x700
+#define HW_PINCTRL_DOE1		0x710
+#define HW_PINCTRL_DOE2		0x720
+
+#define HW_PINCTRL_PIN2IRQ0	0x800
+#define HW_PINCTRL_PIN2IRQ1	0x810
+#define HW_PINCTRL_PIN2IRQ2	0x820
+
+#define HW_PINCTRL_IRQEN0	0x900
+#define HW_PINCTRL_IRQEN1	0x910
+#define HW_PINCTRL_IRQEN2	0x920
+
+#define HW_PINCTRL_IRQLEVEL0	0xA00
+#define HW_PINCTRL_IRQLEVEL1	0xA10
+#define HW_PINCTRL_IRQLEVEL2	0xA20
+
+#define HW_PINCTRL_IRQPOL0	0xB00
+#define HW_PINCTRL_IRQPOL1	0xB10
+#define HW_PINCTRL_IRQPOL2	0xB20
+
+#define HW_PINCTRL_IRQSTAT0	0xC00
+#define HW_PINCTRL_IRQSTAT1	0xC10
+#define HW_PINCTRL_IRQSTAT2	0xC20
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
new file mode 100644
index 00000000000..e454c830f07
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+#define REGS_POWER_PHYS	0x80044000
+#define REGS_POWER_SIZE	0x2000
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0x00000001
+#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0
+#define BM_POWER_CTRL_ENIRQ_PSWITCH	0x00020000
+#define BM_POWER_CTRL_PSWITCH_IRQ	0x00100000
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT	0x00000040
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xC0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000200
+
+#define HW_POWER_RESET		0x100
+
+#define HW_POWER_DEBUG		0x110
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..0d0f9e56ec7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
@@ -0,0 +1,53 @@
+/*
+ * stmp378x: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+#define REGS_PWM_PHYS	0x80064000
+#define REGS_PWM_SIZE	0x2000
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
new file mode 100644
index 00000000000..54d297896de
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
@@ -0,0 +1,140 @@
+/*
+ * stmp378x: PXP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PXP_BASE	(STMP3XXX_REGS_BASE + 0x2A000)
+#define REGS_PXP_PHYS	0x8002A000
+#define REGS_PXP_SIZE	0x2000
+
+#define HW_PXP_CTRL		0x0
+#define BM_PXP_CTRL_ENABLE	0x00000001
+#define BP_PXP_CTRL_ENABLE	0
+#define BM_PXP_CTRL_IRQ_ENABLE	0x00000002
+#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT	0x000000F0
+#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT	4
+#define BM_PXP_CTRL_ROTATE	0x00000300
+#define BP_PXP_CTRL_ROTATE	8
+#define BM_PXP_CTRL_HFLIP	0x00000400
+#define BM_PXP_CTRL_VFLIP	0x00000800
+#define BM_PXP_CTRL_S0_FORMAT	0x0000F000
+#define BP_PXP_CTRL_S0_FORMAT	12
+#define BM_PXP_CTRL_SCALE	0x00040000
+#define BM_PXP_CTRL_CROP	0x00080000
+
+#define HW_PXP_STAT		0x10
+#define BM_PXP_STAT_IRQ		0x00000001
+#define BP_PXP_STAT_IRQ		0
+
+#define HW_PXP_RGBBUF		0x20
+
+#define HW_PXP_RGBSIZE		0x40
+#define BM_PXP_RGBSIZE_HEIGHT	0x00000FFF
+#define BP_PXP_RGBSIZE_HEIGHT	0
+#define BM_PXP_RGBSIZE_WIDTH	0x00FFF000
+#define BP_PXP_RGBSIZE_WIDTH	12
+
+#define HW_PXP_S0BUF		0x50
+
+#define HW_PXP_S0UBUF		0x60
+
+#define HW_PXP_S0VBUF		0x70
+
+#define HW_PXP_S0PARAM		0x80
+#define BM_PXP_S0PARAM_HEIGHT	0x000000FF
+#define BP_PXP_S0PARAM_HEIGHT	0
+#define BM_PXP_S0PARAM_WIDTH	0x0000FF00
+#define BP_PXP_S0PARAM_WIDTH	8
+#define BM_PXP_S0PARAM_YBASE	0x00FF0000
+#define BP_PXP_S0PARAM_YBASE	16
+#define BM_PXP_S0PARAM_XBASE	0xFF000000
+#define BP_PXP_S0PARAM_XBASE	24
+
+#define HW_PXP_S0BACKGROUND	0x90
+
+#define HW_PXP_S0CROP		0xA0
+#define BM_PXP_S0CROP_HEIGHT	0x000000FF
+#define BP_PXP_S0CROP_HEIGHT	0
+#define BM_PXP_S0CROP_WIDTH	0x0000FF00
+#define BP_PXP_S0CROP_WIDTH	8
+#define BM_PXP_S0CROP_YBASE	0x00FF0000
+#define BP_PXP_S0CROP_YBASE	16
+#define BM_PXP_S0CROP_XBASE	0xFF000000
+#define BP_PXP_S0CROP_XBASE	24
+
+#define HW_PXP_S0SCALE		0xB0
+#define BM_PXP_S0SCALE_XSCALE	0x00003FFF
+#define BP_PXP_S0SCALE_XSCALE	0
+#define BM_PXP_S0SCALE_YSCALE	0x3FFF0000
+#define BP_PXP_S0SCALE_YSCALE	16
+
+#define HW_PXP_CSCCOEFF0	0xD0
+
+#define HW_PXP_CSCCOEFF1	0xE0
+
+#define HW_PXP_CSCCOEFF2	0xF0
+
+#define HW_PXP_S0COLORKEYLOW	0x180
+
+#define HW_PXP_S0COLORKEYHIGH	0x190
+
+#define HW_PXP_OL0		(0x200 + 0 * 0x40)
+#define HW_PXP_OL1		(0x200 + 1 * 0x40)
+#define HW_PXP_OL2		(0x200 + 2 * 0x40)
+#define HW_PXP_OL3		(0x200 + 3 * 0x40)
+#define HW_PXP_OL4		(0x200 + 4 * 0x40)
+#define HW_PXP_OL5		(0x200 + 5 * 0x40)
+#define HW_PXP_OL6		(0x200 + 6 * 0x40)
+#define HW_PXP_OL7		(0x200 + 7 * 0x40)
+
+#define HW_PXP_OLn		0x200
+
+#define HW_PXP_OL0SIZE		(0x210 + 0 * 0x40)
+#define HW_PXP_OL1SIZE		(0x210 + 1 * 0x40)
+#define HW_PXP_OL2SIZE		(0x210 + 2 * 0x40)
+#define HW_PXP_OL3SIZE		(0x210 + 3 * 0x40)
+#define HW_PXP_OL4SIZE		(0x210 + 4 * 0x40)
+#define HW_PXP_OL5SIZE		(0x210 + 5 * 0x40)
+#define HW_PXP_OL6SIZE		(0x210 + 6 * 0x40)
+#define HW_PXP_OL7SIZE		(0x210 + 7 * 0x40)
+
+#define HW_PXP_OLnSIZE		0x210
+#define BM_PXP_OLnSIZE_HEIGHT	0x000000FF
+#define BP_PXP_OLnSIZE_HEIGHT	0
+#define BM_PXP_OLnSIZE_WIDTH	0x0000FF00
+#define BP_PXP_OLnSIZE_WIDTH	8
+
+#define HW_PXP_OL0PARAM		(0x220 + 0 * 0x40)
+#define HW_PXP_OL1PARAM		(0x220 + 1 * 0x40)
+#define HW_PXP_OL2PARAM		(0x220 + 2 * 0x40)
+#define HW_PXP_OL3PARAM		(0x220 + 3 * 0x40)
+#define HW_PXP_OL4PARAM		(0x220 + 4 * 0x40)
+#define HW_PXP_OL5PARAM		(0x220 + 5 * 0x40)
+#define HW_PXP_OL6PARAM		(0x220 + 6 * 0x40)
+#define HW_PXP_OL7PARAM		(0x220 + 7 * 0x40)
+
+#define HW_PXP_OLnPARAM		0x220
+#define BM_PXP_OLnPARAM_ENABLE	0x00000001
+#define BP_PXP_OLnPARAM_ENABLE	0
+#define BM_PXP_OLnPARAM_ALPHA_CNTL	0x00000006
+#define BP_PXP_OLnPARAM_ALPHA_CNTL	1
+#define BM_PXP_OLnPARAM_ENABLE_COLORKEY	0x00000008
+#define BM_PXP_OLnPARAM_FORMAT	0x000000F0
+#define BP_PXP_OLnPARAM_FORMAT	4
+#define BM_PXP_OLnPARAM_ALPHA	0x0000FF00
+#define BP_PXP_OLnPARAM_ALPHA	8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..b8dbd6742d9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
@@ -0,0 +1,59 @@
+/*
+ * stmp378x: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS	0x8005C000
+#define REGS_RTC_SIZE	0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+#define BM_RTC_PERSISTENT1_GENERAL	0xFFFFFFFF
+#define BP_RTC_PERSISTENT1_GENERAL	0
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
index 7d7cb0bde3e..6df41762c2a 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/vmalloc.h
+ * stmp378x: SAIF register definitions
  *
- *  Copyright (C) 2000 Russell King.
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,6 +16,6 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define REGS_SAIF_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
new file mode 100644
index 00000000000..801539848c2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
@@ -0,0 +1,49 @@
+/*
+ * stmp378x: SPDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SPDIF_BASE	(STMP3XXX_REGS_BASE + 0x54000)
+#define REGS_SPDIF_PHYS	0x80054000
+#define REGS_SPDIF_SIZE	0x2000
+
+#define HW_SPDIF_CTRL		0x0
+#define BM_SPDIF_CTRL_RUN	0x00000001
+#define BP_SPDIF_CTRL_RUN	0
+#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_SPDIF_CTRL_WORD_LENGTH	0x00000010
+#define BM_SPDIF_CTRL_CLKGATE	0x40000000
+#define BM_SPDIF_CTRL_SFTRST	0x80000000
+
+#define HW_SPDIF_STAT		0x10
+
+#define HW_SPDIF_FRAMECTRL	0x20
+
+#define HW_SPDIF_SRR		0x30
+#define BM_SPDIF_SRR_RATE	0x000FFFFF
+#define BP_SPDIF_SRR_RATE	0
+#define BM_SPDIF_SRR_BASEMULT	0x70000000
+#define BP_SPDIF_SRR_BASEMULT	28
+
+#define HW_SPDIF_DEBUG		0x40
+
+#define HW_SPDIF_DATA		0x50
+
+#define HW_SPDIF_VERSION	0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..28aacf0f58e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
@@ -0,0 +1,102 @@
+/*
+ * stmp378x: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP1_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_BASE	(STMP3XXX_REGS_BASE + 0x34000)
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
new file mode 100644
index 00000000000..08343a8b556
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
@@ -0,0 +1,23 @@
+/*
+ * stmp378x: SYDMA register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SYDMA_BASE	(STMP3XXX_REGS_BASE + 0x26000)
+#define REGS_SYDMA_PHYS	0x80026000
+#define REGS_SYDMA_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..b5527957c67
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
@@ -0,0 +1,68 @@
+/*
+ * stmp378x: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+#define REGS_TIMROT_PHYS	0x80068000
+#define REGS_TIMROT_SIZE	0x2000
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_SELECT_A	0x00000007
+#define BP_TIMROT_ROTCTRL_SELECT_A	0
+#define BM_TIMROT_ROTCTRL_SELECT_B	0x00000070
+#define BP_TIMROT_ROTCTRL_SELECT_B	4
+#define BM_TIMROT_ROTCTRL_POLARITY_A	0x00000100
+#define BM_TIMROT_ROTCTRL_POLARITY_B	0x00000200
+#define BM_TIMROT_ROTCTRL_OVERSAMPLE	0x00000C00
+#define BP_TIMROT_ROTCTRL_OVERSAMPLE	10
+#define BM_TIMROT_ROTCTRL_RELATIVE	0x00001000
+#define BM_TIMROT_ROTCTRL_DIVIDER	0x003F0000
+#define BP_TIMROT_ROTCTRL_DIVIDER	16
+#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT	0x20000000
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_ROTCOUNT	0x10
+#define BM_TIMROT_ROTCOUNT_UPDOWN	0x0000FFFF
+#define BP_TIMROT_ROTCOUNT_UPDOWN	0
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
new file mode 100644
index 00000000000..7f895cb3435
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
@@ -0,0 +1,67 @@
+/*
+ * stmp378x: TVENC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_TVENC_BASE	(STMP3XXX_REGS_BASE + 0x38000)
+#define REGS_TVENC_PHYS	0x80038000
+#define REGS_TVENC_SIZE	0x2000
+
+#define HW_TVENC_CTRL		0x0
+#define BM_TVENC_CTRL_CLKGATE	0x40000000
+#define BM_TVENC_CTRL_SFTRST	0x80000000
+
+#define HW_TVENC_CONFIG		0x10
+#define BM_TVENC_CONFIG_ENCD_MODE	0x00000007
+#define BP_TVENC_CONFIG_ENCD_MODE	0
+#define BM_TVENC_CONFIG_SYNC_MODE	0x00000070
+#define BP_TVENC_CONFIG_SYNC_MODE	4
+#define BM_TVENC_CONFIG_FSYNC_PHS	0x00000200
+#define BM_TVENC_CONFIG_CGAIN	0x0000C000
+#define BP_TVENC_CONFIG_CGAIN	14
+#define BM_TVENC_CONFIG_YGAIN_SEL	0x00030000
+#define BP_TVENC_CONFIG_YGAIN_SEL	16
+#define BM_TVENC_CONFIG_PAL_SHAPE	0x00100000
+
+#define HW_TVENC_SYNCOFFSET	0x30
+
+#define HW_TVENC_COLORSUB0	0xC0
+
+#define HW_TVENC_COLORBURST	0x140
+#define BM_TVENC_COLORBURST_PBA	0x00FF0000
+#define BP_TVENC_COLORBURST_PBA	16
+#define BM_TVENC_COLORBURST_NBA	0xFF000000
+#define BP_TVENC_COLORBURST_NBA	24
+
+#define HW_TVENC_MACROVISION0	0x150
+
+#define HW_TVENC_MACROVISION1	0x160
+
+#define HW_TVENC_MACROVISION2	0x170
+
+#define HW_TVENC_MACROVISION3	0x180
+
+#define HW_TVENC_MACROVISION4	0x190
+
+#define HW_TVENC_DACCTRL	0x1A0
+#define BM_TVENC_DACCTRL_RVAL	0x00000070
+#define BP_TVENC_DACCTRL_RVAL	4
+#define BM_TVENC_DACCTRL_DUMP_TOVDD1	0x00000100
+#define BM_TVENC_DACCTRL_PWRUP1	0x00001000
+#define BM_TVENC_DACCTRL_GAINUP	0x00040000
+#define BM_TVENC_DACCTRL_GAINDN	0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..a251e68bb3a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP1_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP2_BASE	(STMP3XXX_REGS_BASE + 0x6E000)
+#define REGS_UARTAPP2_PHYS	0x8006E000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
new file mode 100644
index 00000000000..25112c1aa60
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: USBCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
+#define REGS_USBCTRL_SIZE	0x2000
+
+#define HW_USBCTRL_USBCMD	0x140
+#define BM_USBCTRL_USBCMD_RS	0x00000001
+#define BP_USBCTRL_USBCMD_RS	0
+#define BM_USBCTRL_USBCMD_RST	0x00000002
+
+#define HW_USBCTRL_USBINTR	0x148
+#define BM_USBCTRL_USBINTR_UE	0x00000001
+#define BP_USBCTRL_USBINTR_UE	0
+
+#define HW_USBCTRL_PORTSC1	0x184
+#define BM_USBCTRL_PORTSC1_PHCD	0x00800000
+
+#define HW_USBCTRL_OTGSC	0x1A4
+#define BM_USBCTRL_OTGSC_ID	0x00000100
+#define BM_USBCTRL_OTGSC_IDIS	0x00010000
+#define BM_USBCTRL_OTGSC_IDIE	0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..11f3b732dc9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp378x: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+#define REGS_USBPHY_PHYS	0x8007C000
+#define REGS_USBPHY_SIZE	0x2000
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
new file mode 100644
index 00000000000..ddd49a760fd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.c
@@ -0,0 +1,299 @@
+/*
+ * Freescale STMP378X platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/dma.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-pxp.h>
+#include <mach/regs-i2c.h>
+
+#include "stmp378x.h"
+/*
+ * IRQ handling
+ */
+static void stmp378x_ack_irq(unsigned int irq)
+{
+	/* Tell ICOLL to release IRQ line */
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* ACK current interrupt */
+	__raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
+			REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp378x_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
+			REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static void stmp378x_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
+		      REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static struct irq_chip stmp378x_chip = {
+	.ack	= stmp378x_ack_irq,
+	.mask	= stmp378x_mask_irq,
+	.unmask = stmp378x_unmask_irq,
+};
+
+void __init stmp378x_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp378x_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c0;
+	u32 mask;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
+		mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
+		mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
+		break;
+	default:
+		return;
+	}
+
+	/* Reset channel and wait for it to complete */
+	stmp3xxx_setl(mask, c0);
+	while (__raw_readl(c0) & mask)
+		cpu_relax();
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+
+static struct map_desc stmp378x_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= STMP3XXX_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+/*
+ * devices that are present only on stmp378x, not on all 3xxx boards:
+ * 	PxP
+ * 	I2C
+ */
+static struct resource pxp_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_PXP_PHYS,
+		.end	= REGS_PXP_PHYS + REGS_PXP_SIZE,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_PXP,
+		.end	= IRQ_PXP,
+	},
+};
+
+struct platform_device stmp378x_pxp = {
+	.name		= "stmp3xxx-pxp",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxp_resource),
+	.resource	= pxp_resource,
+};
+
+static struct resource i2c_resources[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_I2C_ERROR,
+		.end = IRQ_I2C_ERROR,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = REGS_I2C_PHYS,
+		.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+	},
+};
+
+struct platform_device stmp378x_i2c = {
+	.name = "i2c_stmp3xxx",
+	.id = 0,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = i2c_resources,
+	.num_resources = ARRAY_SIZE(i2c_resources),
+};
+
+void __init stmp378x_map_io(void)
+{
+	iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
+}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
new file mode 100644
index 00000000000..0dc15b3c891
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.h
@@ -0,0 +1,25 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP378X_H
+#define __MACH_STMP378X_H
+
+void stmp378x_map_io(void);
+void stmp378x_init_irq(void);
+
+extern struct platform_device stmp378x_pxp, stmp378x_i2c;
+#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
new file mode 100644
index 00000000000..90d8fe6f10f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -0,0 +1,334 @@
+/*
+ * Freescale STMP378X development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/mmc.h>
+#include <mach/gpmi.h>
+
+#include "stmp378x.h"
+
+static struct platform_device *devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+	&stmp3xxx_watchdog,
+	&stmp3xxx_touchscreen,
+	&stmp3xxx_rtc,
+	&stmp3xxx_keyboard,
+	&stmp3xxx_framebuffer,
+	&stmp3xxx_backlight,
+	&stmp3xxx_rotdec,
+	&stmp3xxx_persistent,
+	&stmp3xxx_dcp_bootstream,
+	&stmp3xxx_dcp,
+	&stmp3xxx_battery,
+	&stmp378x_pxp,
+	&stmp378x_i2c,
+};
+
+static struct pin_desc i2c_pins_desc[] = {
+	{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group i2c_pins = {
+	.pins		= i2c_pins_desc,
+	.nr_pins	= ARRAY_SIZE(i2c_pins_desc),
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+static struct pin_desc appuart_pins_0[] = {
+	{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_desc appuart_pins_1[] = {
+#if 0 /* enable these when second appuart will be connected */
+	{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+#endif
+};
+
+static struct pin_desc mmc_pins_desc[] = {
+	{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+	{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group mmc_pins = {
+	.pins		= mmc_pins_desc,
+	.nr_pins	= ARRAY_SIZE(mmc_pins_desc),
+};
+
+static int stmp3xxxmmc_get_wp(void)
+{
+	return gpio_get_value(PINID_PWM4);
+}
+
+static int stmp3xxxmmc_hw_init_ssp1(void)
+{
+	int ret;
+
+	ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
+	if (ret)
+		goto out;
+
+	/* Configure write protect GPIO pin */
+	ret = gpio_request(PINID_PWM4, "mmc wp");
+	if (ret)
+		goto out_wp;
+
+	gpio_direction_input(PINID_PWM4);
+
+	/* Configure POWER pin as gpio to drive power to MMC slot */
+	ret = gpio_request(PINID_PWM3, "mmc power");
+	if (ret)
+		goto out_power;
+
+	gpio_direction_output(PINID_PWM3, 0);
+	mdelay(100);
+
+	return 0;
+
+out_power:
+	gpio_free(PINID_PWM4);
+out_wp:
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+out:
+	return ret;
+}
+
+static void stmp3xxxmmc_hw_release_ssp1(void)
+{
+	gpio_free(PINID_PWM3);
+	gpio_free(PINID_PWM4);
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+}
+
+static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
+{
+	stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
+}
+
+static unsigned long
+stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
+{
+	struct clk *ssp, *parent;
+	char *p;
+	long r;
+
+	ssp = clk_get(NULL, "ssp");
+
+	/* using SSP1, no timeout, clock rate 1 */
+	writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
+	       BF(0xFFFF, SSP_TIMING_TIMEOUT),
+	       base + HW_SSP_TIMING);
+
+	p = (hz > 1000000) ? "io" : "osc_24M";
+	parent = clk_get(NULL, p);
+	clk_set_parent(ssp, parent);
+	r = clk_set_rate(ssp, 2 * hz / 1000);
+	clk_put(parent);
+	clk_put(ssp);
+
+	return hz;
+}
+
+static struct stmp3xxxmmc_platform_data mmc_data = {
+	.hw_init	= stmp3xxxmmc_hw_init_ssp1,
+	.hw_release	= stmp3xxxmmc_hw_release_ssp1,
+	.get_wp		= stmp3xxxmmc_get_wp,
+	.cmd_pullup	= stmp3xxxmmc_cmd_pullup_ssp1,
+	.setclock	= stmp3xxxmmc_setclock_ssp1,
+};
+
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	[1] = {
+		.pins		= appuart_pins_1,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_1),
+	},
+};
+
+static struct pin_desc ssp1_pins_desc[] = {
+	{ PINID_SSP1_SCK,	PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_CMD,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA0,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA3,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_desc ssp2_pins_desc[] = {
+	{ PINID_GPMI_WRN,	PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_RDY1,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D00,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D03,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_group ssp1_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
+};
+
+static struct pin_group ssp2_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
+};
+
+static struct pin_desc gpmi_pins_desc[] = {
+	{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group gpmi_pins = {
+	.pins		= gpmi_pins_desc,
+	.nr_pins	= ARRAY_SIZE(gpmi_pins_desc),
+};
+
+static struct mtd_partition gpmi_partitions[] = {
+	[0] = {
+		.name	= "boot",
+		.size	= 10 * SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "data",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct gpmi_platform_data gpmi_data = {
+	.pins = &gpmi_pins,
+	.nr_parts = ARRAY_SIZE(gpmi_partitions),
+	.parts = gpmi_partitions,
+	.part_types = { "cmdline", NULL },
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias       = "enc28j60",
+		.max_speed_hz   = 6 * 1000 * 1000,
+		.bus_num	= 1,
+		.chip_select    = 0,
+		.platform_data  = NULL,
+	},
+#endif
+};
+
+static void __init stmp378x_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* init stmp3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+	stmp3xxx_mmc.dev.platform_data = &mmc_data;
+	stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
+	stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
+	stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
+	stmp378x_i2c.dev.platform_data = &i2c_pins;
+
+	/* register spi devices */
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	/* add board's devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* add devices selected by command line ssp1= and ssp2= options */
+	stmp3xxx_ssp1_device_register();
+	stmp3xxx_ssp2_device_register();
+}
+
+MACHINE_START(STMP378X, "STMP378X")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp378x_map_io,
+	.init_irq	= stmp378x_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp378x_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile
new file mode 100644
index 00000000000..57deffd09fb
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
+obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..fed2787b6c3
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP37XX
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x30]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x3f
+		movne	\irqstat, #0		@ Ack this IRQ
+		strne	\irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h
new file mode 100644
index 00000000000..98f12938550
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h
@@ -0,0 +1,99 @@
+/*
+ * Freescale STMP37XX interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef _ASM_ARCH_IRQS_H
+#define _ASM_ARCH_IRQS_H
+
+#define IRQ_DEBUG_UART	         0
+#define IRQ_COMMS_RX	           1
+#define IRQ_COMMS_TX	           1
+#define IRQ_SSP2_ERROR	         2
+#define IRQ_VDD5V	              3
+#define IRQ_HEADPHONE_SHORT	    4
+#define IRQ_DAC_DMA	            5
+#define IRQ_DAC_ERROR	          6
+#define IRQ_ADC_DMA	            7
+#define IRQ_ADC_ERROR	          8
+#define IRQ_SPDIF_DMA	          9
+#define IRQ_SAIF2_DMA	          9
+#define IRQ_SPDIF_ERROR	        10
+#define IRQ_SAIF1_IRQ	          10
+#define IRQ_SAIF2_IRQ	          10
+#define IRQ_USB_CTRL	           11
+#define IRQ_USB_WAKEUP	         12
+#define IRQ_GPMI_DMA	           13
+#define IRQ_SSP1_DMA	           14
+#define IRQ_SSP_ERROR	          15
+#define IRQ_GPIO0	              16
+#define IRQ_GPIO1	              17
+#define IRQ_GPIO2	              18
+#define IRQ_SAIF1_DMA	          19
+#define IRQ_SSP2_DMA	           20
+#define IRQ_ECC8_IRQ	           21
+#define IRQ_RTC_ALARM	          22
+#define IRQ_UARTAPP_TX_DMA	     23
+#define IRQ_UARTAPP_INTERNAL	   24
+#define IRQ_UARTAPP_RX_DMA	     25
+#define IRQ_I2C_DMA	            26
+#define IRQ_I2C_ERROR	          27
+#define IRQ_TIMER0	             28
+#define IRQ_TIMER1	             29
+#define IRQ_TIMER2	             30
+#define IRQ_TIMER3	             31
+#define IRQ_BATT_BRNOUT	        32
+#define IRQ_VDDD_BRNOUT	        33
+#define IRQ_VDDIO_BRNOUT	       34
+#define IRQ_VDD18_BRNOUT	       35
+#define IRQ_TOUCH_DETECT	       36
+#define IRQ_LRADC_CH0	          37
+#define IRQ_LRADC_CH1	          38
+#define IRQ_LRADC_CH2	          39
+#define IRQ_LRADC_CH3	          40
+#define IRQ_LRADC_CH4	          41
+#define IRQ_LRADC_CH5	          42
+#define IRQ_LRADC_CH6	          43
+#define IRQ_LRADC_CH7	          44
+#define IRQ_LCDIF_DMA	          45
+#define IRQ_LCDIF_ERROR	        46
+#define IRQ_DIGCTL_DEBUG_TRAP	  47
+#define IRQ_RTC_1MSEC	          48
+#define IRQ_DRI_DMA	            49
+#define IRQ_DRI_ATTENTION	      50
+#define IRQ_GPMI_ATTENTION	     51
+#define IRQ_IR	                 52
+#define IRQ_DCP_VMI	            53
+#define IRQ_DCP	                54
+#define IRQ_RESERVED_55	        55
+#define IRQ_RESERVED_56	        56
+#define IRQ_RESERVED_57	        57
+#define IRQ_RESERVED_58	        58
+#define IRQ_RESERVED_59	        59
+#define SW_IRQ_60	              60
+#define SW_IRQ_61	              61
+#define SW_IRQ_62	              62
+#define SW_IRQ_63	              63
+
+#define NR_REAL_IRQS		64
+#define NR_IRQS			(NR_REAL_IRQS + 32 * 3)
+
+/* TIMER and BRNOUT are FIQ capable */
+#define FIQ_START			IRQ_TIMER0
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
+
+#endif /* _ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h
new file mode 100644
index 00000000000..d56de0c471d
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/pins.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale STMP37XX SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_A0		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_A1		STMP3XXX_PINID(0, 17)
+#define PINID_GPMI_A2		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RESETN	STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_IRQ		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_UART2_CTS		STMP3XXX_PINID(0, 26)
+#define PINID_UART2_RTS		STMP3XXX_PINID(0, 27)
+#define PINID_UART2_RX		STMP3XXX_PINID(0, 28)
+#define PINID_UART2_TX		STMP3XXX_PINID(0, 29)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_RESET 	STMP3XXX_PINID(1, 16)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_WR_RWN	STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RD_E		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_BUSY		STMP3XXX_PINID(1, 21)
+#define PINID_SSP1_CMD		STMP3XXX_PINID(1, 22)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(1, 23)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(1, 24)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(1, 25)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(1, 26)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(1, 27)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(1, 28)
+
+/* Bank 2 */
+#define PINID_PWM0		STMP3XXX_PINID(2, 0)
+#define PINID_PWM1		STMP3XXX_PINID(2, 1)
+#define PINID_PWM2		STMP3XXX_PINID(2, 2)
+#define PINID_PWM3		STMP3XXX_PINID(2, 3)
+#define PINID_PWM4		STMP3XXX_PINID(2, 4)
+#define PINID_I2C_SCL		STMP3XXX_PINID(2, 5)
+#define PINID_I2C_SDA		STMP3XXX_PINID(2, 6)
+#define PINID_ROTTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_CE2N		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_CE3N		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 26)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 27)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_A13		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_A14		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..a323aa9a21f
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_DEVSEL		0x20
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BM_APBH_CHn_CMD_MODE		0x00000003
+#define BP_APBH_CHn_CMD_MODE		0x00000001
+#define BV_APBH_CHn_CMD_MODE_NOOP		 0
+#define BV_APBH_CHn_CMD_MODE_WRITE		 1
+#define BV_APBH_CHn_CMD_MODE_READ		 2
+#define BV_APBH_CHn_CMD_MODE_SENSE		 3
+#define BM_APBH_CHn_CMD_CHAIN		0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..6d080cd5b70
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
@@ -0,0 +1,113 @@
+/*
+ * stmp37xx: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBX_CTRL0_RESET_CHANNEL	16
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_DEVSEL		0x20
+
+#define HW_APBX_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x50
+#define BM_APBX_CHn_CMD_MODE		0x00000003
+#define BP_APBX_CHn_CMD_MODE		0x00000001
+#define BV_APBX_CHn_CMD_MODE_NOOP		 0
+#define BV_APBX_CHn_CMD_MODE_WRITE		 1
+#define BV_APBX_CHn_CMD_MODE_READ		 2
+#define BV_APBX_CHn_CMD_MODE_SENSE		 3
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x70 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x70 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x70 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x70 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x70 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x70 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x70 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x70 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x70 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x70 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x70 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x70 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x70 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x70 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x70 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x70 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x70
+
+#define HW_APBX_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x80
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..3b511f947a5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
@@ -0,0 +1,61 @@
+/*
+ * stmp37xx: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..ca1942b8a3e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
@@ -0,0 +1,111 @@
+/*
+ * stmp37xx: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_LINEOUT	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_LINEOUTCTRL	0x100
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0x0000001F
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	0x00001F00
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	8
+#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	0x00007000
+#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	12
+#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	0x00F00000
+#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	20
+#define BM_AUDIOOUT_LINEOUTCTRL_MUTE	0x01000000
+#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..47f5c92fdaf
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
@@ -0,0 +1,72 @@
+/*
+ * stmp37xx: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00007FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_FRAC		0xD0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_CLKSEQ	0xE0
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0xF0
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..ba1bbe265c2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
@@ -0,0 +1,24 @@
+/*
+ * stmp37xx: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..3b6d990a3af
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..f2b304f5449
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
@@ -0,0 +1,63 @@
+/*
+ * stmp37xx: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000003
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_DSAMPLE_TIME	0x00007000
+#define BP_GPMI_CTRL1_DSAMPLE_TIME	12
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..35882a9b8bc
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp37xx: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..3b7c92239e2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
@@ -0,0 +1,43 @@
+/*
+ * stmp37xx: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x30
+
+#define HW_ICOLL_PRIORITY0	(0x60 + 0 * 0x10)
+#define HW_ICOLL_PRIORITY1	(0x60 + 1 * 0x10)
+#define HW_ICOLL_PRIORITY2	(0x60 + 2 * 0x10)
+#define HW_ICOLL_PRIORITY3	(0x60 + 3 * 0x10)
+
+#define HW_ICOLL_PRIORITYn	0x60
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..72514e8b073
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
@@ -0,0 +1,89 @@
+/*
+ * stmp37xx: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_COUNT	0x0000FFFF
+#define BP_LCDIF_CTRL_COUNT	0
+#define BM_LCDIF_CTRL_RUN	0x00010000
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00020000
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00040000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00080000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00100000
+#define BM_LCDIF_CTRL_DATA_SWIZZLE	0x00600000
+#define BP_LCDIF_CTRL_DATA_SWIZZLE	21
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00800000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x06000000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	25
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x08000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x10000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+
+#define HW_LCDIF_TIMING		0x20
+
+#define HW_LCDIF_VDCTRL0	0x30
+#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT	0x000003FF
+#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x40
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0x000FFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	0xFFF00000
+#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	20
+
+#define HW_LCDIF_VDCTRL2	0x50
+#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT	0x000007FF
+#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x007FF800
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	11
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF800000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	23
+
+#define HW_LCDIF_VDCTRL3	0x60
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x000001FF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x00FFF000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	12
+#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON	0x01000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cc7b4702d1c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..d5efce2388c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp37xx: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x300
+#define HW_PINCTRL_PULL1	0x310
+#define HW_PINCTRL_PULL2	0x320
+#define HW_PINCTRL_PULL3	0x330
+
+#define HW_PINCTRL_DOUT0	0x400
+#define HW_PINCTRL_DOUT1	0x410
+#define HW_PINCTRL_DOUT2	0x420
+
+#define HW_PINCTRL_DIN0		0x500
+#define HW_PINCTRL_DIN1		0x510
+#define HW_PINCTRL_DIN2		0x520
+
+#define HW_PINCTRL_DOE0		0x600
+#define HW_PINCTRL_DOE1		0x610
+#define HW_PINCTRL_DOE2		0x620
+
+#define HW_PINCTRL_PIN2IRQ0	0x700
+#define HW_PINCTRL_PIN2IRQ1	0x710
+#define HW_PINCTRL_PIN2IRQ2	0x720
+
+#define HW_PINCTRL_IRQEN0	0x800
+#define HW_PINCTRL_IRQEN1	0x810
+#define HW_PINCTRL_IRQEN2	0x820
+
+#define HW_PINCTRL_IRQLEVEL0	0x900
+#define HW_PINCTRL_IRQLEVEL1	0x910
+#define HW_PINCTRL_IRQLEVEL2	0x920
+
+#define HW_PINCTRL_IRQPOL0	0xA00
+#define HW_PINCTRL_IRQPOL1	0xA10
+#define HW_PINCTRL_IRQPOL2	0xA20
+
+#define HW_PINCTRL_IRQSTAT0	0xB00
+#define HW_PINCTRL_IRQSTAT1	0xB10
+#define HW_PINCTRL_IRQSTAT2	0xB20
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
new file mode 100644
index 00000000000..0e733d74a22
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
@@ -0,0 +1,56 @@
+/*
+ * stmp37xx: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xB0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000100
+
+#define HW_POWER_RESET		0xE0
+
+#define HW_POWER_DEBUG		0xF0
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..15966a1b62e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
@@ -0,0 +1,51 @@
+/*
+ * stmp37xx: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..fac40edc38a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
@@ -0,0 +1,57 @@
+/*
+ * stmp37xx: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS   0x8005C000
+#define REGS_RTC_SIZE   0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..cbde891a06c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
@@ -0,0 +1,101 @@
+/*
+ * stmp37xx: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..4af0f6edfa7
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
@@ -0,0 +1,49 @@
+/*
+ * stmp37xx: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..0594275d860
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
@@ -0,0 +1,85 @@
+/*
+ * stmp37xx: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
index 9e197ae4590..9145e22df32 100644
--- a/arch/arm/mach-imx/include/mach/io.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imxads/include/mach/io.h
+ * stmp37xx: USBCTL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,14 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
+#define REGS_USBCTL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTL_PHYS	0x80000
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
index a93df7cba69..1a2ae9cbdfe 100644
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
@@ -1,8 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/memory.h
+ * stmp37xx: USBCTRL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,11 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-#endif
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..b7fce0fbc56
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT	0x00000001
+#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT	0
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c
new file mode 100644
index 00000000000..8c7d6fb191a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.c
@@ -0,0 +1,219 @@
+/*
+ * Freescale STMP37XX platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/dma.h>
+
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include "stmp37xx.h"
+
+/*
+ * IRQ handling
+ */
+static void stmp37xx_ack_irq(unsigned int irq)
+{
+	/* Disable IRQ */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+
+	/* ACK current interrupt */
+	__raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp37xx_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static void stmp37xx_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static struct irq_chip stmp37xx_chip = {
+	.ack	= stmp37xx_ack_irq,
+	.mask	= stmp37xx_mask_irq,
+	.unmask = stmp37xx_unmask_irq,
+};
+
+void __init stmp37xx_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp37xx_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		/* Reset channel and wait for it to complete */
+		stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+		while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
+		       (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+		while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
+		       (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+static struct map_desc stmp37xx_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init stmp37xx_map_io(void)
+{
+	iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
+}
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h
new file mode 100644
index 00000000000..0b75fb796a6
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP37XX_H
+#define __MACH_STMP37XX_H
+
+void stmp37xx_map_io(void);
+void stmp37xx_init_irq(void);
+
+#endif /* __MACH_STMP37XX_H */
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
new file mode 100644
index 00000000000..394f21ab59e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -0,0 +1,101 @@
+/*
+ * Freescale STMP37XX development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include "stmp37xx.h"
+
+/*
+ * List of STMP37xx development board specific devices
+ */
+static struct platform_device *stmp37xx_devb_devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+struct pin_desc appuart_pins_0[] = {
+	{ PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	/* 37xx has the only app uart */
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+
+static void __init stmp37xx_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* Init STMP3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+
+	/* Add STMP37xx development board devices */
+	platform_add_devices(stmp37xx_devb_devices,
+			ARRAY_SIZE(stmp37xx_devb_devices));
+}
+
+MACHINE_START(STMP37XX, "STMP37XX")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp37xx_map_io,
+	.init_irq	= stmp37xx_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp37xx_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
new file mode 100644
index 00000000000..337b9aabce4
--- /dev/null
+++ b/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,105 @@
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+
+comment "ST-Ericsson Mobile Platform Products"
+
+config MACH_U300
+	bool "U300"
+
+comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
+
+choice
+	prompt "U300/U330/U335/U365 system type"
+	default MACH_U300_BS2X
+	---help---
+	You need to select the target system, i.e. the
+	U300/U330/U335/U365 board that you want to compile your kernel
+	for.
+
+config MACH_U300_BS2X
+	bool "S26/S26/B25/B26 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S26/S25 test products. (Also works on
+		B26/B25 big boards.)
+
+config MACH_U300_BS330
+	bool "S330/B330 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S330/B330 test products.
+
+config MACH_U300_BS335
+	bool "S335/B335 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S335/B335 test products.
+
+config MACH_U300_BS365
+	bool "S365/B365 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S365/B365 test products.
+
+endchoice
+
+choice
+	prompt "Memory configuration"
+	default MACH_U300_SINGLE_RAM
+	---help---
+	You have to config the kernel according to the physical memory
+	configuration.
+
+config MACH_U300_SINGLE_RAM
+	bool "Single RAM"
+	help
+		Select this if you want support for Single RAM phones.
+
+config MACH_U300_DUAL_RAM
+	bool "Dual RAM"
+	help
+		Select this if you want support for Dual RAM phones.
+		This is two RAM memorys on different EMIFs.
+endchoice
+
+config U300_DEBUG
+	bool "Debug support for U300"
+	depends on PM
+	help
+		Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SEMI_IS_SHARED
+	bool "The SEMI is used by both the access and application side"
+	depends on MACH_U300
+	help
+		This makes it possible to use the SEMI (Shared External
+		Memory Interface) from both from access and application
+		side.
+
+comment "All the settings below must match the bootloader's settings"
+
+config MACH_U300_ACCESS_MEM_SIZE
+       int "Access CPU memory allocation"
+       range 7 25
+       depends on MACH_U300_SINGLE_RAM
+       default 13
+       help
+		How much memory in MiB that the Access side CPU has allocated
+
+config MACH_U300_2MB_ALIGNMENT_FIX
+       bool "2MiB alignment fix"
+       depends on MACH_U300_SINGLE_RAM
+       default y
+       help
+		If yes and the Access side CPU has allocated an odd size in
+		MiB, this fix gives you one MiB extra that would otherwise be
+		lost due to Linux 2 MiB alignment policy.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
new file mode 100644
index 00000000000..24950e0df4b
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y		:= core.o clock.o timer.o gpio.o padmux.o
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+obj-$(CONFIG_ARCH_U300)	          += u300.o
+obj-$(CONFIG_MMC)                 += mmc.o
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 00000000000..6fbfc6ea2d3
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,15 @@
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+ifdef CONFIG_MACH_U300_SINGLE_RAM
+     zreladdr-y	:= 0x28E08000
+  params_phys-y	:= 0x28E00100
+else
+     zreladdr-y	:= 0x48008000
+  params_phys-y	:= 0x48000100
+endif
+
+# This isn't used.
+#initrd_phys-y	:= 0x29800000
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
new file mode 100644
index 00000000000..5cd04d6751b
--- /dev/null
+++ b/arch/arm/mach-u300/clock.c
@@ -0,0 +1,1487 @@
+/*
+ *
+ * arch/arm/mach-u300/clock.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Define clocks in the app platform.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+
+/*
+ * TODO:
+ * - move all handling of the CCR register into this file and create
+ *   a spinlock for the CCR register
+ * - switch to the clkdevice lookup mechanism that maps clocks to
+ *   device ID:s instead when it becomes available in kernel 2.6.29.
+ * - implement rate get/set for all clocks that need it.
+ */
+
+/*
+ * Syscon clock I/O registers lock so clock requests don't collide
+ * NOTE: this is a local lock only used to lock access to clock and
+ * reset registers in syscon.
+ */
+static DEFINE_SPINLOCK(syscon_clkreg_lock);
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ *  AMBA bus
+ *  |
+ *  +- CPU
+ *  +- NANDIF NAND Flash interface
+ *  +- SEMI Shared Memory interface
+ *  +- ISP Image Signal Processor (U335 only)
+ *  +- CDS (U335 only)
+ *  +- DMA Direct Memory Access Controller
+ *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ *  +- APEX
+ *  +- VIDEO_ENC AVE2/3 Video Encoder
+ *  +- XGAM Graphics Accelerator Controller
+ *  +- AHB
+ *  |
+ *  +- ahb:0 AHB Bridge
+ *  |  |
+ *  |  +- ahb:1 INTCON Interrupt controller
+ *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
+ *  |  +- ahb:4 EMIF   External Memory interface
+ *  |
+ *  +- fast:0 FAST bridge
+ *  |  |
+ *  |  +- fast:1 MMCSD MMC/SD card reader controller
+ *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
+ *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
+ *  |  +- fast:4 I2C0  I2C channel 0 controller
+ *  |  +- fast:5 I2C1  I2C channel 1 controller
+ *  |  +- fast:6 SPI   SPI controller
+ *  |  +- fast:7 UART1 Secondary UART (U335 only)
+ *  |
+ *  +- slow:0 SLOW bridge
+ *     |
+ *     +- slow:1 SYSCON (not possible to control)
+ *     +- slow:2 WDOG Watchdog
+ *     +- slow:3 UART0 primary UART
+ *     +- slow:4 TIMER_APP Application timer - used in Linux
+ *     +- slow:5 KEYPAD controller
+ *     +- slow:6 GPIO controller
+ *     +- slow:7 RTC controller
+ *     +- slow:8 BT Bus Tracer (not used currently)
+ *     +- slow:9 EH Event Handler (not used currently)
+ *     +- slow:a TIMER_ACC Access style timer (not used currently)
+ *     +- slow:b PPM (U335 only, what is that?)
+ */
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val |= clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val &= ~clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = false;
+}
+
+int __clk_get(struct clk *clk)
+{
+	u16 val;
+
+	/* The MMC and MSPRO clocks need some special set-up */
+	if (!strcmp(clk->name, "MCLK")) {
+		/* Set default MMC clock divisor to 18.9 MHz */
+		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Disable MSPRO frequency */
+		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	if (!strcmp(clk->name, "MSPRO")) {
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Enable MSPRO frequency */
+		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+static void syscon_clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void syscon_clk_enable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static u16 syscon_clk_get_rate(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+	return val;
+}
+
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+static void enable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S0 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void enable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S1 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S0 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S1 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
+
+
+static void syscon_clk_rate_set_mclk(unsigned long rate)
+{
+	u16 val;
+	u32 reg;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 18900000:
+		val = 0x0054;
+		break;
+	case 20800000:
+		val = 0x0044;
+		break;
+	case 23100000:
+		val = 0x0043;
+		break;
+	case 26000000:
+		val = 0x0033;
+		break;
+	case 29700000:
+		val = 0x0032;
+		break;
+	case 34700000:
+		val = 0x0022;
+		break;
+	case 41600000:
+		val = 0x0021;
+		break;
+	case 52000000:
+		val = 0x0011;
+		break;
+	case 104000000:
+		val = 0x0000;
+		break;
+	default:
+		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
+		       rate);
+		return;
+	}
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+		~U300_SYSCON_MMF0R_MASK;
+	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+void syscon_clk_rate_set_cpuclk(unsigned long rate)
+{
+	u16 val;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 13000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+		break;
+	case 52000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+		break;
+	case 104000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+		break;
+	case 208000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+		break;
+	default:
+		return;
+	}
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
+		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		/* some blocks lack clocking registers and cannot be disabled */
+		if (clk->disable)
+			clk->disable(clk);
+		if (likely((u32)clk->parent))
+			clk_disable(clk->parent);
+	}
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+	if (unlikely(!strcmp(clk->name, "I2S0")))
+		disable_i2s0_vcxo();
+	if (unlikely(!strcmp(clk->name, "I2S1")))
+		disable_i2s1_vcxo();
+#endif
+	spin_unlock_irqrestore(&clk->lock, iflags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount++ == 0) {
+		if (likely((u32)clk->parent))
+			ret = clk_enable(clk->parent);
+
+		if (unlikely(ret != 0))
+			clk->usecount--;
+		else {
+			/* remove reset line (we never enable reset again) */
+			syscon_block_reset_disable(clk);
+			/* clocks without enable function are always on */
+			if (clk->enable)
+				clk->enable(clk);
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+			if (unlikely(!strcmp(clk->name, "I2S0")))
+				enable_i2s0_vcxo();
+			if (unlikely(!strcmp(clk->name, "I2S1")))
+				enable_i2s1_vcxo();
+#endif
+		}
+	}
+	spin_unlock_irqrestore(&clk->lock, iflags);
+	return ret;
+
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* Returns the clock rate in Hz */
+static unsigned long clk_get_rate_cpuclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+		return 104000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 208000000;
+	default:
+		break;
+	}
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_emif_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 104000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_xgamclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_mclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		/*
+		 * Here, the 208 MHz PLL gets shut down and the always
+		 * on 13 MHz PLL used for RTC etc kicks into use
+		 * instead.
+		 */
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+	{
+		/*
+		 * This clock is under program control. The register is
+		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
+		 * high, bit 3-0 gives cycles-1 to count low. Distribute
+		 * these with no more than 1 cycle difference between
+		 * low and high and add low and high to get the actual
+		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
+		 * divide by 1 and 1 so the highest frequency possible
+		 * is 104 MHz.
+		 *
+		 * e.g. 0x54 =>
+		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+		 */
+		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+			U300_SYSCON_MMF0R_MASK;
+		switch (val) {
+		case 0x0054:
+			return 18900000;
+		case 0x0044:
+			return 20800000;
+		case 0x0043:
+			return 23100000;
+		case 0x0033:
+			return 26000000;
+		case 0x0032:
+			return 29700000;
+		case 0x0022:
+			return 34700000;
+		case 0x0021:
+			return 41600000;
+		case 0x0011:
+			return 52000000;
+		case 0x0000:
+			return 104000000;
+		default:
+			break;
+		}
+	}
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 26000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+	else
+		return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 18900000)
+		return 18900000;
+	if (rate >= 20800000)
+		return 20800000;
+	if (rate >= 23100000)
+		return 23100000;
+	if (rate >= 26000000)
+		return 26000000;
+	if (rate >= 29700000)
+		return 29700000;
+	if (rate >= 34700000)
+		return 34700000;
+	if (rate >= 41600000)
+		return 41600000;
+	if (rate >= 52000000)
+		return 52000000;
+	return -EINVAL;
+}
+
+static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 13000000)
+		return 13000000;
+	if (rate >= 52000000)
+		return 52000000;
+	if (rate >= 104000000)
+		return 104000000;
+	if (rate >= 208000000)
+		return 208000000;
+	return -EINVAL;
+}
+
+/*
+ * This adjusts a requested rate to the closest exact rate
+ * a certain clock can provide. For a fixed clock it's
+ * mostly clk->rate.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+	/* Else default to fixed value */
+
+	if (clk->round_rate) {
+		return (long) clk->round_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to round rate of %s\n",
+		       clk->name);
+	}
+	return (long) clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: set for EMIFCLK and AHBCLK */
+	/* Else assume the clock is fixed and fail */
+	if (clk->set_rate) {
+		return clk->set_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
+		       clk->name, rate);
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * Clock definitions. The clock parents are set to respective
+ * bridge and the clock framework makes sure that the clocks have
+ * parents activated and are brought out of reset when in use.
+ *
+ * Clocks that have hw_ctrld = true are hw controlled, and the hw
+ * can by itself turn these clocks on and off.
+ * So in other words, we don't really have to care about them.
+ */
+
+static struct clk amba_clk = {
+	.name	    = "AMBA",
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+};
+
+/*
+ * These blocks are connected directly to the AMBA bus
+ * with no bridge.
+ */
+
+static struct clk cpu_clk = {
+	.name	    = "CPU",
+	.parent	    = &amba_clk,
+	.rate	    = 208000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
+	.set_rate   = clk_set_rate_cpuclk,
+	.get_rate   = clk_get_rate_cpuclk,
+	.round_rate = clk_round_rate_cpuclk,
+};
+
+static struct clk nandif_clk = {
+	.name       = "NANDIF",
+	.parent	    = &amba_clk,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk semi_clk = {
+	.name       = "SEMI",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	/* It is not possible to reset SEMI */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk isp_clk = {
+	.name	    = "ISP",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk cds_clk = {
+	.name	    = "CDS",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+static struct clk dma_clk = {
+	.name       = "DMA",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk aaif_clk = {
+	.name       = "AAIF",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk apex_clk = {
+	.name       = "APEX",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk video_enc_clk = {
+	.name       = "VIDEO_ENC",
+	.parent	    = &amba_clk,
+	.rate       = 208000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	/* This has XGAM in the name but refers to the video encoder */
+	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk xgam_clk = {
+	.name       = "XGAMCLK",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
+	.get_rate   = clk_get_rate_xgamclk,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* This clock is used to activate the video encoder */
+static struct clk ahb_clk = {
+	.name	    = "AHB",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false, /* This one is set to false due to HW bug */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+
+/*
+ * Clocks on the AHB bridge
+ */
+
+static struct clk ahb_subsys_clk = {
+	.name	    = "AHB_SUBSYS",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+static struct clk intcon_clk = {
+	.name	    = "INTCON",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
+	/* INTCON can be reset but not clock-gated */
+};
+
+static struct clk mspro_clk = {
+	.name       = "MSPRO",
+	.parent	    = &ahb_subsys_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk emif_clk = {
+	.name	    = "EMIF",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 104000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_emif_clk,
+};
+
+
+/*
+ * Clocks on the FAST bridge
+ */
+static struct clk fast_clk = {
+	.name	    = "FAST_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk mmcsd_clk = {
+	.name       = "MCLK",
+	.parent	    = &fast_clk,
+	.rate       = 18900000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
+	.get_rate   = clk_get_rate_mclk,
+	.set_rate   = clk_set_rate_mclk,
+	.round_rate = clk_round_rate_mclk,
+	.disable    = syscon_clk_disable,
+	.enable     = syscon_clk_enable,
+};
+
+static struct clk i2s0_clk = {
+	.name       = "i2s0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2s1_clk = {
+	.name       = "i2s1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c0_clk = {
+	.name       = "I2C0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c1_clk = {
+	.name       = "I2C1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk spi_clk = {
+	.name       = "SPI",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk uart1_clk = {
+	.name	    = "UART1",
+	.parent	    = &fast_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+
+/*
+ * Clocks on the SLOW bridge
+ */
+static struct clk slow_clk = {
+	.name	    = "SLOW_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* TODO: implement SYSCON clock? */
+
+static struct clk wdog_clk = {
+	.name	    = "WDOG",
+	.parent	    = &slow_clk,
+	.hw_ctrld   = false,
+	.rate	    = 32768,
+	.reset	    = false,
+	/* This is always on, cannot be enabled/disabled or reset */
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart_clk = {
+	.name	    = "UARTCLK",
+	.parent	    = &slow_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk keypad_clk = {
+	.name       = "KEYPAD",
+	.parent	    = &slow_clk,
+	.rate       = 32768,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.name       = "GPIO",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.name	    = "RTC",
+	.parent	    = &slow_clk,
+	.rate	    = 32768,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
+	/* This clock is always on, cannot be enabled/disabled */
+};
+
+static struct clk bustr_clk = {
+	.name       = "BUSTR",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk evhist_clk = {
+	.name       = "EVHIST",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk timer_clk = {
+	.name       = "TIMER",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk app_timer_clk = {
+	.name       = "TIMER_APP",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk ppm_clk = {
+	.name	    = "PPM",
+	.parent	    = &slow_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+#define DEF_LOOKUP(devid, clkref)		\
+	{					\
+	.dev_id = devid,			\
+	.clk = clkref,				\
+	}
+
+/*
+ * Here we only define clocks that are meaningful to
+ * look up through clockdevice.
+ */
+static struct clk_lookup lookups[] = {
+	/* Connected directly to the AMBA bus */
+	DEF_LOOKUP("amba", &amba_clk),
+	DEF_LOOKUP("cpu", &cpu_clk),
+	DEF_LOOKUP("nandif", &nandif_clk),
+	DEF_LOOKUP("semi", &semi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("isp", &isp_clk),
+	DEF_LOOKUP("cds", &cds_clk),
+#endif
+	DEF_LOOKUP("dma", &dma_clk),
+	DEF_LOOKUP("aaif", &aaif_clk),
+	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("video_enc", &video_enc_clk),
+	DEF_LOOKUP("xgam", &xgam_clk),
+	DEF_LOOKUP("ahb", &ahb_clk),
+	/* AHB bridge clocks */
+	DEF_LOOKUP("ahb", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon", &intcon_clk),
+	DEF_LOOKUP("mspro", &mspro_clk),
+	DEF_LOOKUP("pl172", &emif_clk),
+	/* FAST bridge clocks */
+	DEF_LOOKUP("fast", &fast_clk),
+	DEF_LOOKUP("mmci", &mmcsd_clk),
+	/*
+	 * The .0 and .1 identifiers on these comes from the platform device
+	 * .id field and are assigned when the platform devices are registered.
+	 */
+	DEF_LOOKUP("i2s.0", &i2s0_clk),
+	DEF_LOOKUP("i2s.1", &i2s1_clk),
+	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
+	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
+	DEF_LOOKUP("pl022", &spi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("uart1", &uart1_clk),
+#endif
+	/* SLOW bridge clocks */
+	DEF_LOOKUP("slow", &slow_clk),
+	DEF_LOOKUP("wdog", &wdog_clk),
+	DEF_LOOKUP("uart0", &uart_clk),
+	DEF_LOOKUP("apptimer", &app_timer_clk),
+	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("u300-gpio", &gpio_clk),
+	DEF_LOOKUP("rtc0", &rtc_clk),
+	DEF_LOOKUP("bustr", &bustr_clk),
+	DEF_LOOKUP("evhist", &evhist_clk),
+	DEF_LOOKUP("timer", &timer_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("ppm", &ppm_clk),
+#endif
+};
+
+static void __init clk_register(void)
+{
+	int i;
+
+	/* Register the lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+}
+
+/*
+ * These are the clocks for cells registered as primecell drivers
+ * on the AMBA bus. These must be on during AMBA device registration
+ * since the bus probe will attempt to read magic configuration
+ * registers for these devices. If they are deactivated these probes
+ * will fail.
+ *
+ *
+ * Please note that on emif, both RAM and NAND is connected in dual
+ * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
+ *
+ */
+void u300_clock_primecells(void)
+{
+	clk_enable(&intcon_clk);
+	clk_enable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_enable(&uart1_clk);
+#endif
+	clk_enable(&spi_clk);
+
+	clk_enable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_clock_primecells);
+
+void u300_unclock_primecells(void)
+{
+
+	clk_disable(&intcon_clk);
+	clk_disable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_disable(&uart1_clk);
+#endif
+	clk_disable(&spi_clk);
+	clk_disable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_unclock_primecells);
+
+/*
+ * The interrupt controller is enabled before the clock API is registered.
+ */
+void u300_enable_intcon_clock(void)
+{
+	clk_enable(&intcon_clk);
+}
+EXPORT_SYMBOL(u300_enable_intcon_clock);
+
+/*
+ * The timer is enabled before the clock API is registered.
+ */
+void u300_enable_timer_clock(void)
+{
+	clk_enable(&app_timer_clk);
+}
+EXPORT_SYMBOL(u300_enable_timer_clock);
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+/*
+ * The following makes it possible to view the status (especially
+ * reference count and reset status) for the clocks in the platform
+ * by looking into the special file <debugfs>/u300_clocks
+ */
+
+/* A list of all clocks in the platform */
+static struct clk *clks[] = {
+	/* Top node clock for the AMBA bus */
+	&amba_clk,
+	/* Connected directly to the AMBA bus */
+	&cpu_clk,
+	&nandif_clk,
+	&semi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&isp_clk,
+	&cds_clk,
+#endif
+	&dma_clk,
+	&aaif_clk,
+	&apex_clk,
+	&video_enc_clk,
+	&xgam_clk,
+	&ahb_clk,
+
+	/* AHB bridge clocks */
+	&ahb_subsys_clk,
+	&intcon_clk,
+	&mspro_clk,
+	&emif_clk,
+	/* FAST bridge clocks */
+	&fast_clk,
+	&mmcsd_clk,
+	&i2s0_clk,
+	&i2s1_clk,
+	&i2c0_clk,
+	&i2c1_clk,
+	&spi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_clk,
+#endif
+	/* SLOW bridge clocks */
+	&slow_clk,
+	&wdog_clk,
+	&uart_clk,
+	&app_timer_clk,
+	&keypad_clk,
+	&gpio_clk,
+	&rtc_clk,
+	&bustr_clk,
+	&evhist_clk,
+	&timer_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&ppm_clk,
+#endif
+};
+
+static int u300_clocks_show(struct seq_file *s, void *data)
+{
+	struct clk *clk;
+	int i;
+
+	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
+		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
+	seq_printf(s, "---------------------------------------------" \
+		   "-----------------------------------------\n");
+	for (i = 0; i < ARRAY_SIZE(clks); i++) {
+		clk = clks[i];
+		if (clk != ERR_PTR(-ENOENT)) {
+			/* Format clock and device name nicely */
+			char cdp[33];
+			int chars;
+
+			chars = snprintf(&cdp[0], 17, "%s", clk->name);
+			while (chars < 16) {
+				cdp[chars] = ' ';
+				chars++;
+			}
+			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
+					 dev_name(clk->dev) : "N/A");
+			while (chars < 16) {
+				cdp[chars+16] = ' ';
+				chars++;
+			}
+			cdp[32] = '\0';
+			if (clk->get_rate)
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ",
+					   clk->get_rate(clk));
+			else
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t" \
+					   "(unknown rate)\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ");
+		}
+	}
+	return 0;
+}
+
+static int u300_clocks_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u300_clocks_show, NULL);
+}
+
+static const struct file_operations u300_clocks_operations = {
+	.open		= u300_clocks_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void init_clk_read_procfs(void)
+{
+	/* Expose a simple debugfs interface to view all clocks */
+	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
+				   NULL, NULL, &u300_clocks_operations);
+}
+#else
+static inline void init_clk_read_procfs(void)
+{
+}
+#endif
+
+static int __init u300_clock_init(void)
+{
+	u16 val;
+
+	/*
+	 * FIXME: shall all this powermanagement stuff really live here???
+	 */
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Power management enable */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	clk_register();
+
+	init_clk_read_procfs();
+
+	/*
+	 * Some of these may be on when we boot the system so make sure they
+	 * are turned OFF.
+	 */
+	syscon_block_reset_enable(&timer_clk);
+	timer_clk.disable(&timer_clk);
+
+	/*
+	 * These shall be turned on by default when we boot the system
+	 * so make sure they are ON. (Adding CPU here is a bit too much.)
+	 * These clocks will be claimed by drivers later.
+	 */
+	syscon_block_reset_disable(&semi_clk);
+	syscon_block_reset_disable(&emif_clk);
+	semi_clk.enable(&semi_clk);
+	emif_clk.enable(&emif_clk);
+
+	return 0;
+}
+/* initialize clocking early to be available later in the boot */
+core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
new file mode 100644
index 00000000000..fc6d9ccfe7e
--- /dev/null
+++ b/arch/arm/mach-u300/clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-u300/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Adopted to ST-Ericsson U300 platforms by
+ * Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+#include <linux/clk.h>
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	struct device *dev;
+	const char *name;
+	struct clk *parent;
+
+	spinlock_t lock;
+	unsigned long rate;
+	bool reset;
+	__u16 clk_val;
+	__s8 usecount;
+	__u32 res_reg;
+	__u16 res_mask;
+
+	bool hw_ctrld;
+
+	void (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	void (*init) (struct clk *);
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+void u300_clock_primecells(void);
+void u300_unclock_primecells(void);
+void u300_enable_intcon_clock(void);
+void u300_enable_timer_clock(void);
+
+#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 00000000000..89b3ccf35e1
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,649 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+	{
+		.virtual	= U300_SLOW_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_AHB_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_FAST_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= 0xffff2000, /* TCM memory */
+		.pfn		= __phys_to_pfn(0xffff2000),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+
+	/*
+	 * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+	 * may have to be moved to 0x00000000 in order to use the ROM.
+	 */
+	/*
+	{
+		.virtual	= U300_BOOTROM_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_ROM,
+	},
+	*/
+};
+
+void __init u300_map_io(void)
+{
+	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+	.dev = {
+		.init_name = "uart0", /* Slow device at 0x3000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART0_BASE,
+		.end   = U300_UART0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+	.dev = {
+		.init_name = "uart1", /* Fast device at 0x7000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART1_BASE,
+		.end   = U300_UART1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+	.dev = {
+		.init_name = "pl172", /* AHB device at 0x4000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_EMIF_CFG_BASE,
+		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022", /* Fast device at 0x6000 offset */
+	},
+	.res = {
+		.start = U300_SPI_BASE,
+		.end   = U300_SPI_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_SPI, NO_IRQ },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+static struct amba_device mmcsd_device = {
+	.dev = {
+		.init_name = "mmci", /* Fast device at 0x1000 offset */
+		.platform_data = NULL, /* Added later */
+	},
+	.res = {
+		.start = U300_MMCSD_BASE,
+		.end   = U300_MMCSD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_device,
+#endif
+	&pl022_device,
+	&pl172_device,
+	&mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+	{
+		.start = U300_GPIO_BASE,
+		.end   = (U300_GPIO_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "gpio0",
+		.start = IRQ_U300_GPIO_PORT0,
+		.end   = IRQ_U300_GPIO_PORT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio1",
+		.start = IRQ_U300_GPIO_PORT1,
+		.end   = IRQ_U300_GPIO_PORT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio2",
+		.start = IRQ_U300_GPIO_PORT2,
+		.end   = IRQ_U300_GPIO_PORT2,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name  = "gpio3",
+		.start = IRQ_U300_GPIO_PORT3,
+		.end   = IRQ_U300_GPIO_PORT3,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio4",
+		.start = IRQ_U300_GPIO_PORT4,
+		.end   = IRQ_U300_GPIO_PORT4,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name  = "gpio5",
+		.start = IRQ_U300_GPIO_PORT5,
+		.end   = IRQ_U300_GPIO_PORT5,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio6",
+		.start = IRQ_U300_GPIO_PORT6,
+		.end   = IRQ_U300_GPIO_PORT6,
+		.flags = IORESOURCE_IRQ,
+	},
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+	{
+		.start = U300_KEYPAD_BASE,
+		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "coh901461-press",
+		.start = IRQ_U300_KEYPAD_KEYBF,
+		.end   = IRQ_U300_KEYPAD_KEYBF,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "coh901461-release",
+		.start = IRQ_U300_KEYPAD_KEYBR,
+		.end   = IRQ_U300_KEYPAD_KEYBR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start = U300_RTC_BASE,
+		.end   = U300_RTC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_RTC,
+		.end   = IRQ_U300_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+	{
+		.start = U300_NAND_IF_PHYS_BASE,
+		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct resource i2c0_resources[] = {
+	{
+		.start = U300_I2C0_BASE,
+		.end   = U300_I2C0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C0,
+		.end   = IRQ_U300_I2C0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c1_resources[] = {
+	{
+		.start = U300_I2C1_BASE,
+		.end   = U300_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C1,
+		.end   = IRQ_U300_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
+static struct resource wdog_resources[] = {
+	{
+		.start = U300_WDOG_BASE,
+		.end   = U300_WDOG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_WDOG,
+		.end   = IRQ_U300_WDOG,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+	{
+		.name  = "AVE3e I/O Area",
+		.start = U300_VIDEOENC_BASE,
+		.end   = U300_VIDEOENC_BASE + SZ_512K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e IRQ0",
+		.start = IRQ_U300_VIDEO_ENC_0,
+		.end   = IRQ_U300_VIDEO_ENC_0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e IRQ1",
+		.start = IRQ_U300_VIDEO_ENC_1,
+		.end   = IRQ_U300_VIDEO_ENC_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e Physmem Area",
+		.start = 0, /* 0 will be remapped to reserved memory */
+		.end   = SZ_1M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/*
+	 * The AVE3e requires two regions of 256MB that it considers
+	 * "invisible". The hardware will not be able to access these
+	 * adresses, so they should never point to system RAM.
+	 */
+	{
+		.name  = "AVE3e Reserved 0",
+		.start = 0xd0000000,
+		.end   = 0xd0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e Reserved 1",
+		.start = 0xe0000000,
+		.end   = 0xe0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device wdog_device = {
+	.name = "wdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(wdog_resources),
+	.resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+	.name = "stddci2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
+	.resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+	.name = "stddci2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
+	.resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+	.name = "u300-gpio",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(gpio_resources),
+	.resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+	.name = "keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+	.name = "rtc0",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_resources),
+	.resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+	.name = "nandif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(fsmc_resources),
+	.resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+	.name = "video_enc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ave_resources),
+	.resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+	&i2c0_device,
+	&i2c1_device,
+	&keypad_device,
+	&rtc_device,
+	&gpio_device,
+	&fsmc_device,
+	&wdog_device,
+	&ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+	u32 mask[2] = {0, 0};
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++)
+		set_bit(i, (unsigned long *) &mask[0]);
+	u300_enable_intcon_clock();
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+	u16 chipid;
+	const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+	{
+		.chipid = 0xb800,
+		.name = "DB3000",
+	},
+	{
+		.chipid = 0xc000,
+		.name = "DB3100",
+	},
+	{
+		.chipid = 0xc800,
+		.name = "DB3150",
+	},
+	{
+		.chipid = 0xd800,
+		.name = "DB3200",
+	},
+	{
+		.chipid = 0xe000,
+		.name = "DB3250",
+	},
+	{
+		.chipid = 0xe800,
+		.name = "DB3210",
+	},
+	{
+		.chipid = 0xf000,
+		.name = "DB3350 P1x",
+	},
+	{
+		.chipid = 0xf100,
+		.name = "DB3350 P2x",
+	},
+	{
+		.chipid = 0x0000, /* List terminator */
+		.name = NULL,
+	}
+};
+
+static void u300_init_check_chip(void)
+{
+
+	u16 val;
+	struct db_chip *chip;
+	const char *chipname;
+	const char unknown[] = "UNKNOWN";
+
+	/* Read out and print chip ID */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+	/* This is in funky bigendian order... */
+	val = (val & 0xFFU) << 8 | (val >> 8);
+	chip = db_chips;
+	chipname = unknown;
+
+	for ( ; chip->chipid; chip++) {
+		if (chip->chipid == (val & 0xFF00U)) {
+			chipname = chip->name;
+			break;
+		}
+	}
+	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+	       "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+	if ((val & 0xFF00U) != 0xc800) {
+		printk(KERN_ERR "Platform configured for BS25/BS26 " \
+		       "with DB3150 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+	if ((val & 0xFF00U) != 0xd800) {
+		printk(KERN_ERR "Platform configured for BS330 " \
+		       "with DB3200 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       " with DB3350 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+	if ((val & 0xFF00U) != 0xe800) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       "with DB3210 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+	unsigned long curr_start = __pa(high_memory);
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+		for (j = 0; j < platform_devs[i]->num_resources; j++) {
+			struct resource *const res =
+			  &platform_devs[i]->resource[j];
+
+			if (IORESOURCE_MEM == res->flags &&
+				     0 == res->start) {
+				res->start  = curr_start;
+				res->end   += curr_start;
+				curr_start += (res->end - res->start + 1);
+
+				printk(KERN_INFO "core.c: Mapping RAM " \
+				       "%#x-%#x to device %s:%s\n",
+					res->start, res->end,
+				       platform_devs[i]->name, res->name);
+			}
+		}
+	}
+}
+
+void __init u300_init_devices(void)
+{
+	int i;
+	u16 val;
+
+	/* Check what platform we run and print some status information */
+	u300_init_check_chip();
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Register the AMBA devices in the AMBA bus abstraction layer */
+	u300_clock_primecells();
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	u300_unclock_primecells();
+
+	u300_assign_physmem();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+	/*
+	 * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+	 * both subsystems are requesting this mode.
+	 * If we not share the Acc SDRAM, this is never the case. Therefore
+	 * enable it here from the App side.
+	 */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+	/*
+	 * This needs to be initialized later: it needs the input framework
+	 * to be initialized first.
+	 */
+	return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
new file mode 100644
index 00000000000..308cdb197a9
--- /dev/null
+++ b/arch/arm/mach-u300/gpio.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Need access to SYSCON registers for PADmuxing */
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+	const char *name;
+	int irq;
+	int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+	{
+		.name = "gpio0",
+		.number = 0,
+	},
+	{
+		.name = "gpio1",
+		.number = 1,
+	},
+	{
+		.name = "gpio2",
+		.number = 2,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name = "gpio3",
+		.number = 3,
+	},
+	{
+		.name = "gpio4",
+		.number = 4,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name = "gpio5",
+		.number = 5,
+	},
+	{
+		.name = "gpio6",
+		.number = 6,
+	},
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW   0
+#define DEFAULT_OUTPUT_HIGH  1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP  0
+#define ENABLE_PULL_UP  1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN       1
+#define GPIO_OUT      2
+
+struct u300_gpio_configuration_data {
+	unsigned char pin_usage;
+	unsigned char default_output_value;
+	unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 5, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 6, pind 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	}
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		/* These 4 pins doesn't exist on DB3210 */
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	}
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+	int (*callback)(void *);
+	void *data;
+	int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+	if (gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "registered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = func;
+	gpio_pin[gpio].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+	if (!gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "unregistered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = NULL;
+	gpio_pin[gpio].data = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_pin[gpio].users)
+		return -EINVAL;
+	else
+		gpio_pin[gpio].users++;
+
+	gpio_users++;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	gpio_users--;
+	gpio_pin[gpio].users--;
+	if (unlikely(gpio_pin[gpio].users < 0)) {
+		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+			 gpio);
+		gpio_pin[gpio].users = 0;
+	}
+
+	return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+	return readl(virtbase + U300_GPIO_PXPDIR +
+	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		/* set */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val | (1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		/* clear */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val & ~(1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin*/
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/* This is not needed since it sets the bits to zero.*/
+	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/*
+	 * FIXME: configure for push/pull, open drain or open source per pin
+	 * in setup. The current driver will only support push/pull.
+	 */
+	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((gpio & 0x07) << 1));
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	gpio_set_value(gpio, value);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+	u32 val;
+	unsigned long flags;
+	local_irq_save(flags);
+
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val |= (1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	if (edge)
+		val |= (1 << (gpio & 0x07));
+	else
+		val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct u300_gpio_port *port = dev_id;
+	u32 val;
+	int pin;
+
+	/* Read event register */
+	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask with enable register */
+	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask relevant bits */
+	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	/* ACK IRQ (clear event) */
+	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Print message */
+	while (val != 0) {
+		unsigned gpio;
+
+		pin = __ffs(val);
+		/* mask off this pin */
+		val &= ~(1 << pin);
+		gpio = (port->number << 3) + pin;
+
+		if (gpio_pin[gpio].callback)
+			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+		else
+			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+			       gpio);
+	}
+	return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+	int i, j;
+	unsigned long flags;
+	u32 val;
+
+	/* Write default values to all pins */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+
+	/*
+	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * default value on outputs.
+	 */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+			local_irq_save(flags);
+			val = readl(virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			/* Mask out this pin */
+			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+			writel(val, virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			local_irq_restore(flags);
+		}
+	}
+
+	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
+	for (i = 0; i < U300_GPIO_MAX; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+	u32 val;
+	int err = 0;
+	int i;
+	int num_irqs;
+
+	gpiodev = &pdev->dev;
+	memset(gpio_pin, 0, sizeof(gpio_pin));
+
+	/* Get GPIO clock */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(gpiodev, "could not get GPIO clock\n");
+		goto err_no_clk;
+	}
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(gpiodev, "could not enable GPIO clock\n");
+		goto err_no_clk_enable;
+	}
+
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres)
+		goto err_no_resource;
+
+	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+	    == NULL) {
+		err = -ENODEV;
+		goto err_no_ioregion;
+	}
+
+	virtbase = ioremap(memres->start, resource_size(memres));
+	if (!virtbase) {
+		err = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	dev_info(gpiodev, "remapped 0x%08x to %p\n",
+		 memres->start, virtbase);
+
+#ifdef U300_COH901335
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+	/* Turn on the GPIO block */
+	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+	val = readl(virtbase + U300_GPIO_CR);
+	dev_info(gpiodev, "COH901571/3 block version: %d, " \
+	       "number of cores: %d\n",
+	       ((val & 0x0000FE00) >> 9),
+	       ((val & 0x000001FC) >> 2));
+	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+	/* Set up some padmuxing here */
+#ifdef CONFIG_MMC
+	pmx_set_mission_mode_mmc();
+#endif
+#ifdef CONFIG_SPI_PL022
+	pmx_set_mission_mode_spi();
+#endif
+
+	gpio_set_initial_values();
+
+	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+		gpio_ports[num_irqs].irq =
+			platform_get_irq_byname(pdev,
+						gpio_ports[num_irqs].name);
+
+		err = request_irq(gpio_ports[num_irqs].irq,
+				  gpio_irq_handler, IRQF_DISABLED,
+				  gpio_ports[num_irqs].name,
+				  &gpio_ports[num_irqs]);
+		if (err) {
+			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+				gpio_ports[num_irqs].name);
+			goto err_no_irq;
+		}
+		/* Turns off PortX_irq_force */
+		writel(0x0, virtbase + U300_GPIO_PXIFR +
+				 num_irqs * U300_GPIO_PORTX_SPACING);
+	}
+
+	return 0;
+
+ err_no_irq:
+	for (i = 0; i < num_irqs; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+ err_no_ioremap:
+	release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+	clk_disable(clk);
+ err_no_clk_enable:
+	clk_put(clk);
+ err_no_clk:
+	dev_info(gpiodev, "module ERROR:%d\n", err);
+	return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+	int i;
+
+	/* Turn off the GPIO block */
+	writel(0x00000000U, virtbase + U300_GPIO_CR);
+	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+	release_mem_region(memres->start, memres->end - memres->start);
+	clk_disable(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static struct platform_driver gpio_driver = {
+	.driver		= {
+		.name	= "u300-gpio",
+	},
+	.remove		= __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+	return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
new file mode 100644
index 00000000000..92e3cc872c6
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
new file mode 100644
index 00000000000..f3a1cbbeeab
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/debug-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugging macro include header.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+
+	.macro	addruart,rx
+	/* If we move the adress using MMU, use this. */
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ MMU enabled?
+	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rx, \rx, #0x00003000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
new file mode 100644
index 00000000000..20731ae39d3
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/entry-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level IRQ helper macros for ST-Ericsson U300
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #0
+	teq	\irqstat, #0
+	bne	1002f
+1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #32
+	teq	\irqstat, #0
+	beq	1003f
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
new file mode 100644
index 00000000000..c8174128d7e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -0,0 +1,290 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/gpio.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_H
+#define __MACH_U300_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+/* Switch type depending on platform/chip variant */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_COH901335
+#endif
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
+#define U300_COH901571_3
+#endif
+
+/* Get base address for regs here */
+#include "u300-regs.h"
+/* IRQ numbers */
+#include "irqs.h"
+
+/*
+ * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
+ * used for anything, and often is. The event/enable etc figures are for
+ * the lowermost pin (pin 0 on each port), shift this left to match your
+ * pin if you're gonna use these values.
+ */
+#ifdef U300_COH901335
+#define U300_GPIO_PORTX_SPACING				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_GPIO_PXPDIR				(0x00)
+#define U300_GPIO_PXPDOR				(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x04)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x08)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x0C)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x10)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x14)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x18)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_GPIO_CR					(0x54)
+#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+/* three ports of 8 bits each = GPIO pins 0..23 */
+#define U300_GPIO_NUM_PORTS 3
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX	(U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+#ifdef U300_COH901571_3
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_GPIO_CR					(0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+#define U300_GPIO_PORTX_SPACING				(0x30)
+/* Port X Pin Data INPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDIR				(0x04)
+/* Port X Pin Data OUTPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDOR				(0x08)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x0C)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x14)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x18)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x1C)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x20)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+#ifdef CONFIG_MACH_U300_BS335
+/* seven ports of 8 bits each = GPIO pins 0..55 */
+#define U300_GPIO_NUM_PORTS 7
+#else
+/* five ports of 8 bits each = GPIO pins 0..39 */
+#define U300_GPIO_NUM_PORTS 5
+#endif
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP		4
+#define U300_GPIO_PIN_CAM_REG_EN	5
+#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_UART_CTS		2
+#define U300_GPIO_PIN_UART_RTS		3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
+#endif
+
+#endif
+
+/* translates a pin number to a port number */
+#define PIN_TO_PORT(val) (val >> 3)
+
+/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_register_callback(unsigned gpio,
+				  int (*func)(void *arg),
+				  void *);
+extern int gpio_unregister_callback(unsigned gpio);
+extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
+extern void disable_irq_on_gpio_pin(unsigned gpio);
+extern void gpio_pullup(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern void gpio_set_value(unsigned gpio, int value);
+
+/* wrappers to sleep-enable the previous two functions */
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	/*
+	 * FIXME: This is no 1-1 mapping at all, it points to the
+	 * whole block of 8 pins.
+	 */
+	return (irq - IRQ_U300_GPIO_PORT0) << 3;
+}
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
new file mode 100644
index 00000000000..b99d4ce0ac2
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-u300/include/mach/hardware.h
+ */
+#include <asm/sizes.h>
+#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h
new file mode 100644
index 00000000000..5d6b4c13b3a
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/io.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Dummy IO map for being able to use writew()/readw(),
+ * writel()/readw() and similar accessor functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
new file mode 100644
index 00000000000..a6867b12773
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/irqs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * IRQ channel definitions for the U300 platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_U300_INTCON0_START		0
+#define IRQ_U300_INTCON1_START		32
+/* These are on INTCON0 - 30 lines */
+#define IRQ_U300_IRQ0_EXT		0
+#define IRQ_U300_IRQ1_EXT		1
+#define IRQ_U300_DMA			2
+#define IRQ_U300_VIDEO_ENC_0		3
+#define IRQ_U300_VIDEO_ENC_1		4
+#define IRQ_U300_AAIF_RX		5
+#define IRQ_U300_AAIF_TX		6
+#define IRQ_U300_AAIF_VGPIO		7
+#define IRQ_U300_AAIF_WAKEUP		8
+#define IRQ_U300_PCM_I2S0_FRAME		9
+#define IRQ_U300_PCM_I2S0_FIFO		10
+#define IRQ_U300_PCM_I2S1_FRAME		11
+#define IRQ_U300_PCM_I2S1_FIFO		12
+#define IRQ_U300_XGAM_GAMCON		13
+#define IRQ_U300_XGAM_CDI		14
+#define IRQ_U300_XGAM_CDICON		15
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+/* MMIACC not used on the DB3210 or DB3350 chips */
+#define IRQ_U300_XGAM_MMIACC		16
+#endif
+#define IRQ_U300_XGAM_PDI		17
+#define IRQ_U300_XGAM_PDICON		18
+#define IRQ_U300_XGAM_GAMEACC		19
+#define IRQ_U300_XGAM_MCIDCT		20
+#define IRQ_U300_APEX			21
+#define IRQ_U300_UART0			22
+#define IRQ_U300_SPI			23
+#define IRQ_U300_TIMER_APP_OS		24
+#define IRQ_U300_TIMER_APP_DD		25
+#define IRQ_U300_TIMER_APP_GP1		26
+#define IRQ_U300_TIMER_APP_GP2		27
+#define IRQ_U300_TIMER_OS		28
+#define IRQ_U300_TIMER_MS		29
+#define IRQ_U300_KEYPAD_KEYBF		30
+#define IRQ_U300_KEYPAD_KEYBR		31
+/* These are on INTCON1 - 32 lines */
+#define IRQ_U300_GPIO_PORT0		32
+#define IRQ_U300_GPIO_PORT1		33
+#define IRQ_U300_GPIO_PORT2		34
+
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
+    defined(CONFIG_MACH_U300_BS335)
+/* These are for DB3150, DB3200 and DB3350 */
+#define IRQ_U300_WDOG			35
+#define IRQ_U300_EVHIST			36
+#define IRQ_U300_MSPRO			37
+#define IRQ_U300_MMCSD_MCIINTR0		38
+#define IRQ_U300_MMCSD_MCIINTR1		39
+#define IRQ_U300_I2C0			40
+#define IRQ_U300_I2C1			41
+#define IRQ_U300_RTC			42
+#define IRQ_U300_NFIF			43
+#define IRQ_U300_NFIF2			44
+#endif
+
+/* DB3150 and DB3200 have only 45 IRQs */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_NR_IRQS			45
+#endif
+
+/* The DB3350-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS335
+#define IRQ_U300_ISP_F0			45
+#define IRQ_U300_ISP_F1			46
+#define IRQ_U300_ISP_F2			47
+#define IRQ_U300_ISP_F3			48
+#define IRQ_U300_ISP_F4			49
+#define IRQ_U300_GPIO_PORT3		50
+#define IRQ_U300_SYSCON_PLL_LOCK	51
+#define IRQ_U300_UART1			52
+#define IRQ_U300_GPIO_PORT4		53
+#define IRQ_U300_GPIO_PORT5		54
+#define IRQ_U300_GPIO_PORT6		55
+#define U300_NR_IRQS			56
+#endif
+
+/* The DB3210-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS365
+#define IRQ_U300_GPIO_PORT3		35
+#define IRQ_U300_GPIO_PORT4		36
+#define IRQ_U300_WDOG			37
+#define IRQ_U300_EVHIST			38
+#define IRQ_U300_MSPRO			39
+#define IRQ_U300_MMCSD_MCIINTR0		40
+#define IRQ_U300_MMCSD_MCIINTR1		41
+#define IRQ_U300_I2C0			42
+#define IRQ_U300_I2C1			43
+#define IRQ_U300_RTC			44
+#define IRQ_U300_NFIF			45
+#define IRQ_U300_NFIF2			46
+#define IRQ_U300_SYSCON_PLL_LOCK	47
+#define U300_NR_IRQS			48
+#endif
+
+#define NR_IRQS U300_NR_IRQS
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
new file mode 100644
index 00000000000..bf134bcc129
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/memory.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Memory virtual/physical mapping constants.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_MACH_U300_DUAL_RAM
+
+#define PHYS_OFFSET		UL(0x48000000)
+#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+
+#else
+
+#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#else
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#endif
+#define BOOT_PARAMS_OFFSET (0x28000000 + \
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
+#endif
+
+/*
+ * We enable a real big DMA buffer if need be.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
new file mode 100644
index 00000000000..77d9210a82e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/platform.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic platform init and mapping functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+void u300_map_io(void);
+void u300_init_irq(void);
+void u300_init_devices(void);
+extern struct sys_timer u300_timer;
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
new file mode 100644
index 00000000000..1c90d1b1ccb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -0,0 +1,644 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/syscon.h
+ *
+ *
+ * Copyright (C) 2008 ST-Ericsson AB
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifndef __MACH_SYSCON_H
+#define __MACH_SYSCON_H
+
+/*
+ * All register defines for SYSCON registers that concerns individual
+ * block clocks and reset lines are registered here. This is because
+ * we don't want any other file to try to fool around with this stuff.
+ */
+
+/* APP side SYSCON registers */
+/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR						(0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR						(0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR						(0x0014)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
+#endif
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR						(0x0018)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
+#endif
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR						(0x001c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
+#endif
+#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR					(0x0020)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR					(0x0024)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN    			(0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN     			(0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN     			(0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN     			(0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR					(0x0028)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
+#endif
+#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER					(0x002c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
+#endif
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
+#endif
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
+#endif
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR					(0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR					(0x003c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
+#endif
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR					(0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR					(0x44)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
+#endif
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR					(0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
+/*
+ * All other clocking registers moved to clock.c!
+ */
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR						(0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR					(0x70)
+#define U300_SYSCON_SRCLR_MASK					(0x03FF)
+#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR					(0x0078)
+#define U300_SYSCON_ECCR_MASK					(0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
+/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
+#define U300_SYSCON_PMC1LR					(0x007C)
+#define U300_SYSCON_PMC1LR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
+#define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
+#define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
+#define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
+#define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
+#define U300_SYSCON_PMC1LR_PDI_WCDMA				(0x3000)
+#define U300_SYSCON_PMC1LR_MMCSD_MASK				(0x0C00)
+#define U300_SYSCON_PMC1LR_MMCSD_MMCSD				(0x0000)
+#define U300_SYSCON_PMC1LR_MMCSD_MSPRO				(0x0400)
+#define U300_SYSCON_PMC1LR_MMCSD_DSP				(0x0800)
+#define U300_SYSCON_PMC1LR_MMCSD_WCDMA				(0x0C00)
+#define U300_SYSCON_PMC1LR_ETM_MASK				(0x0300)
+#define U300_SYSCON_PMC1LR_ETM_ACC				(0x0000)
+#define U300_SYSCON_PMC1LR_ETM_APP				(0x0100)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK			(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF			(0x0040)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM			(0x0080)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB		(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF			(0x0010)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM			(0x0020)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF			(0x0004)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM			(0x0008)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_MASK				(0x0003)
+#define U300_SYSCON_PMC1LR_EMIF_1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0			(0x0001)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1			(0x0002)
+#define U300_SYSCON_PMC1LR_EMIF_1				(0x0003)
+/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
+#define U300_SYSCON_PMC1HR					(0x007E)
+#define U300_SYSCON_PMC1HR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1HR_MISC_2_MASK				(0xC000)
+#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_MISC_2_MSPRO				(0x4000)
+#define U300_SYSCON_PMC1HR_MISC_2_DSP				(0x8000)
+#define U300_SYSCON_PMC1HR_MISC_2_AAIF				(0xC000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF			(0x1000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP			(0x2000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC			(0x0400)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP			(0x0800)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI			(0x0100)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI			(0x0040)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI			(0x0010)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP			(0x0020)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0			(0x0004)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS			(0x0008)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK			(0x0003)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0			(0x0001)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF			(0x0003)
+/* Step one for killing the applications system 16bit (-/W) */
+#define U300_SYSCON_KA1R					(0x0080)
+#define U300_SYSCON_KA1R_MASK					(0xFFFF)
+#define U300_SYSCON_KA1R_VALUE					(0xFFFF)
+/* Step two for killing the application system 16bit (-/W) */
+#define U300_SYSCON_KA2R					(0x0084)
+#define U300_SYSCON_KA2R_MASK					(0xFFFF)
+#define U300_SYSCON_KA2R_VALUE					(0xFFFF)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R					(0x90)
+#define U300_SYSCON_MMF0R_MASK					(0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R					(0x94)
+#define U300_SYSCON_MMF1R_MASK					(0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
+/* AAIF control register 16 bit (R/W) */
+#define U300_SYSCON_AAIFCR					(0x98)
+#define U300_SYSCON_AAIFCR_MASK					(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK			(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL			(0x0000)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING			(0x0001)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT			(0x0002)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT			(0x0003)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR					(0x9C)
+#define U300_SYSCON_MMCR_MASK					(0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
+
+/* TODO: More SYSCON registers missing */
+#define U300_SYSCON_PMC3R					(0x10c)
+#define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
+#define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
+/* TODO: Missing other configs, I just added the SPI stuff */
+
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR					(0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR					(0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR					(0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
+#define U300_SYSCON_MCR						(0x12c)
+#define U300_SYSCON_MCR_FIELD_MASK				(0x00FF)
+#define U300_SYSCON_MCR_PMGEN_CR_4_MASK				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_4_SPI				(0x0040)
+#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_2_MASK				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC		(0x0010)
+#define U300_SYSCON_MCR_PMGEN_CR_2_DSP				(0x0020)
+#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_0_MASK				(0x000C)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1		(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2		(0x0004)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3		(0x0008)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
+#define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
+#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR					(0x140)
+#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR					(0x144)
+#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR					(0x148)
+#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR					(0x400)
+/* Video IRQ clear 16bit (R/W) */
+#define U300_SYSCON_VICR					(0x404)
+#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE		(0x0002)
+#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE		(0x0001)
+/* SMCR */
+#define U300_SYSCON_SMCR					(0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR					(0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR						(0x4f8)
+#define U300_SYSCON_PCR_SERV_IND				(0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR						(0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
+
+
+/* CPU clock defines */
+/**
+ * CPU high frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_HIGH    208
+/**
+ * CPU medium frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_MEDIUM  104
+/**
+ * CPU low frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_LOW      13
+
+/* EMIF clock defines */
+/**
+ * EMIF high frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_HIGH   104
+/**
+ * EMIF medium frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_MEDIUM 104
+/**
+ * EMIF low frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_LOW     13
+
+/* AHB clock defines */
+/**
+ * AHB high frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_HIGH     52
+/**
+ * AHB medium frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_MEDIUM   52
+/**
+ * AHB low frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
+
+enum syscon_busmaster {
+  SYSCON_BM_DMAC,
+  SYSCON_BM_XGAM,
+  SYSCON_BM_VIDEO_ENC
+};
+
+/*
+ * Note that this array must match the order of the array "clk_reg"
+ * in syscon.c
+ */
+enum syscon_clk {
+  SYSCON_CLKCONTROL_SLOW_BRIDGE,
+  SYSCON_CLKCONTROL_UART,
+  SYSCON_CLKCONTROL_BTR,
+  SYSCON_CLKCONTROL_EH,
+  SYSCON_CLKCONTROL_GPIO,
+  SYSCON_CLKCONTROL_KEYPAD,
+  SYSCON_CLKCONTROL_APP_TIMER,
+  SYSCON_CLKCONTROL_ACC_TIMER,
+  SYSCON_CLKCONTROL_FAST_BRIDGE,
+  SYSCON_CLKCONTROL_I2C0,
+  SYSCON_CLKCONTROL_I2C1,
+  SYSCON_CLKCONTROL_I2S0,
+  SYSCON_CLKCONTROL_I2S1,
+  SYSCON_CLKCONTROL_MMC,
+  SYSCON_CLKCONTROL_SPI,
+  SYSCON_CLKCONTROL_I2S0_CORE,
+  SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_AAIF,
+  SYSCON_CLKCONTROL_AHB,
+  SYSCON_CLKCONTROL_APEX,
+  SYSCON_CLKCONTROL_CPU,
+  SYSCON_CLKCONTROL_DMA,
+  SYSCON_CLKCONTROL_EMIF,
+  SYSCON_CLKCONTROL_NAND_IF,
+  SYSCON_CLKCONTROL_VIDEO_ENC,
+  SYSCON_CLKCONTROL_XGAM,
+  SYSCON_CLKCONTROL_SEMI,
+  SYSCON_CLKCONTROL_AHB_SUBSYS,
+  SYSCON_CLKCONTROL_MSPRO
+};
+
+enum syscon_sysclk_mode {
+  SYSCON_SYSCLK_DISABLED,
+  SYSCON_SYSCLK_M_CLK,
+  SYSCON_SYSCLK_ACC_FSM,
+  SYSCON_SYSCLK_PLL60_48,
+  SYSCON_SYSCLK_PLL60_60,
+  SYSCON_SYSCLK_ACC_PLL208,
+  SYSCON_SYSCLK_APP_PLL13,
+  SYSCON_SYSCLK_APP_FSM,
+  SYSCON_SYSCLK_RTC,
+  SYSCON_SYSCLK_APP_PLL208
+};
+
+enum syscon_sysclk_req {
+  SYSCON_SYSCLKREQ_DISABLED,
+  SYSCON_SYSCLKREQ_ACTIVE_LOW
+};
+
+enum syscon_clk_mode {
+  SYSCON_CLKMODE_OFF,
+  SYSCON_CLKMODE_DEFAULT,
+  SYSCON_CLKMODE_LOW,
+  SYSCON_CLKMODE_MEDIUM,
+  SYSCON_CLKMODE_HIGH,
+  SYSCON_CLKMODE_PERMANENT,
+  SYSCON_CLKMODE_ON,
+};
+
+enum syscon_call_mode {
+  SYSCON_CLKCALL_NOWAIT,
+  SYSCON_CLKCALL_WAIT,
+};
+
+int syscon_dc_on(bool keep_power_on);
+int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
+				      bool active);
+bool syscon_get_busmaster_active_state(void);
+int syscon_set_sleep_mask(enum syscon_clk,
+			  bool sleep_ctrl);
+int syscon_config_sysclk(u32 sysclk,
+			 enum syscon_sysclk_mode sysclkmode,
+			 bool inverse,
+			 u32 divisor,
+			 enum syscon_sysclk_req sysclkreq);
+bool syscon_can_turn_off_semi_clock(void);
+
+/* This function is restricted to core.c */
+int syscon_request_normal_power(bool req);
+
+/* This function is restricted to be used by platform_speed.c */
+int syscon_speed_request(enum syscon_call_mode wait_mode,
+			 enum syscon_clk_mode req_clk_mode);
+#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
new file mode 100644
index 00000000000..8daf13634ce
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/system.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * System shutdown and reset functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
+		/* Disable interrupts */
+		local_irq_disable();
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
new file mode 100644
index 00000000000..f233b72633f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/timex.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform tick rate definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+/* This is for the APP OS GP1 (General Purpose 1) timer */
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
new file mode 100644
index 00000000000..88333dfb19f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+#define U300_NAND_CS0_VIRT_BASE		0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+#define U300_NAND_IF_VIRT_BASE		0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE		0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE			(0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE		(0xc0080000)
+#else
+#define U300_VIDEOENC_BASE		(0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 46d4ca91af7..29acb718acf 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -1,8 +1,7 @@
 /*
- *  arch/arm/mach-imxads/include/mach/system.h
+ * arch/arm/mach-u300/include/mach/uncompress.h
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2003 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,23 +17,30 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
+#define AMBA_UART_DR	(*(volatile unsigned char *)0xc0013000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0xc001302C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0xc0013030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0xc0013018)
 
-static void
-arch_idle(void)
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
 {
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
 }
 
-static inline void
-arch_reset(char mode, const char *cmd)
+static inline void flush(void)
 {
-	cpu_reset(0);
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
 }
 
-#endif
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b00c51a66fb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/vmalloc.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Virtual memory allocations
+ * End must be above the I/O registers and on an even 2MiB boundary.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
new file mode 100644
index 00000000000..3138d3955c9
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.c
@@ -0,0 +1,216 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Johan Lundin <johan.lundin@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/mmc/host.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/mmc.h>
+#include "mmc.h"
+
+struct mmci_card_event {
+	struct input_dev *mmc_input;
+	int mmc_inserted;
+	struct work_struct workq;
+	struct mmc_platform_data mmc0_plat_data;
+};
+
+static unsigned int mmc_status(struct device *dev)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+	return mmci_card->mmc_inserted;
+}
+
+/*
+ * Here follows a large chunk of code which will only be enabled if you
+ * have both the AB3100 chip mounted and the MMC subsystem activated.
+ */
+
+static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
+{
+	int v;
+
+	/*
+	 * MMC Spec:
+	 * bit 7:	1.70 - 1.95V
+	 * bit 8 - 14:	2.0 - 2.6V
+	 * bit 15 - 23:	2.7 - 3.6V
+	 *
+	 * ab3100 voltages:
+	 * 000 - 2.85V
+	 * 001 - 2.75V
+	 * 010 - 1.8V
+	 * 011 - 1.5V
+	 */
+	switch (voltage) {
+	case 8:
+		v = 3;
+		break;
+	case 9:
+	case 10:
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+		v = 1;
+		break;
+	case 16:
+		v = 1;
+		break;
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 22:
+	case 23:
+	case 24:
+		v = 0;
+		break;
+	default:
+		v = 0;
+		break;
+	}
+
+	/* PL180 voltage register bits */
+	return v << 2;
+}
+
+
+
+static int mmci_callback(void *data)
+{
+	struct mmci_card_event *mmci_card = data;
+
+	disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD);
+	schedule_work(&mmci_card->workq);
+
+	return 0;
+}
+
+
+static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+
+	return sprintf(buf, "%d\n", !mmci_card->mmc_inserted);
+}
+
+static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL);
+
+static void _mmci_callback(struct work_struct *ws)
+{
+
+	struct mmci_card_event *mmci_card = container_of(
+		ws,
+		struct mmci_card_event, workq);
+
+	mdelay(20);
+
+	mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+
+	input_report_switch(mmci_card->mmc_input, KEY_INSERT,
+			    !mmci_card->mmc_inserted);
+	input_sync(mmci_card->mmc_input);
+
+	pr_debug("MMC/SD card was %s\n",
+		 mmci_card->mmc_inserted ? "removed" : "inserted");
+
+	enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+}
+
+int __devinit mmc_init(struct amba_device *adev)
+{
+	struct mmci_card_event *mmci_card;
+	struct device *mmcsd_device = &adev->dev;
+	int ret = 0;
+
+	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
+	if (!mmci_card)
+		return -ENOMEM;
+
+	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
+	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
+	mmci_card->mmc0_plat_data.status = mmc_status;
+
+	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
+
+	INIT_WORK(&mmci_card->workq, _mmci_callback);
+
+	ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection");
+	if (ret) {
+		printk(KERN_CRIT "Could not allocate MMC card detection " \
+		       "GPIO pin\n");
+		goto out;
+	}
+
+	ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD);
+	if (ret) {
+		printk(KERN_CRIT "Invalid GPIO pin requested\n");
+		goto out;
+	}
+
+	ret = sysfs_create_file(&mmcsd_device->kobj,
+			       &dev_attr_mmc_inserted.attr);
+	if (ret)
+		goto out;
+
+	mmci_card->mmc_input = input_allocate_device();
+	if (!mmci_card->mmc_input) {
+		printk(KERN_CRIT "Could not allocate MMC input device\n");
+		return -ENOMEM;
+	}
+
+	mmci_card->mmc_input->name = "MMC insert notification";
+	mmci_card->mmc_input->id.bustype = BUS_HOST;
+	mmci_card->mmc_input->id.vendor = 0;
+	mmci_card->mmc_input->id.product = 0;
+	mmci_card->mmc_input->id.version = 0x0100;
+	mmci_card->mmc_input->dev.parent = mmcsd_device;
+	input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT);
+
+	/*
+	 * Since this must always be compiled into the kernel, this input
+	 * is never unregistered or free:ed.
+	 */
+	ret = input_register_device(mmci_card->mmc_input);
+	if (ret) {
+		input_free_device(mmci_card->mmc_input);
+		goto out;
+	}
+
+	input_set_drvdata(mmci_card->mmc_input, mmci_card);
+
+	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
+				     mmci_card);
+
+	schedule_work(&mmci_card->workq);
+
+	printk(KERN_INFO "Registered MMC insert/remove notification\n");
+out:
+	return ret;
+}
diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h
new file mode 100644
index 00000000000..92b85125abb
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.h
@@ -0,0 +1,18 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/amba/bus.h>
+
+int __devinit mmc_init(struct amba_device *adev);
+
+#endif
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
new file mode 100644
index 00000000000..f3664564f08
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.c
@@ -0,0 +1,58 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/u300-regs.h>
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
+void pmx_set_mission_mode_mmc(void)
+{
+	u16 val;
+
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
+
+void pmx_set_mission_mode_spi(void)
+{
+	u16 val;
+
+	/* Set up padmuxing so the SPI port and its chipselects are active */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	/*
+	 * Activate the SPI port (disable the use of these pins for generic
+	 * GPIO, DSP, AAIF
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
+	/*
+	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
+	/*
+	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
new file mode 100644
index 00000000000..8c2099ac504
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX API
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+
+#ifndef __MACH_U300_PADMUX_H
+#define __MACH_U300_PADMUX_H
+
+void pmx_set_mission_mode_mmc(void);
+void pmx_set_mission_mode_spi(void);
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
new file mode 100644
index 00000000000..cce53204880
--- /dev/null
+++ b/arch/arm/mach-u300/timer.c
@@ -0,0 +1,422 @@
+/*
+ *
+ * arch/arm/mach-u300/timer.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Timer COH 901 328, runs the OS timer interrupt.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/* Generic stuff */
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+#include "clock.h"
+
+/*
+ * APP side special timer registers
+ * This timer contains four timers which can fire an interrupt each.
+ * OS (operating system) timer @ 32768 Hz
+ * DD (device driver) timer @ 1 kHz
+ * GP1 (general purpose 1) timer @ 1MHz
+ * GP2 (general purpose 2) timer @ 1MHz
+ */
+
+/* Reset OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_ROST					(0x0000)
+#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
+/* Enable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_EOST					(0x0004)
+#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
+/* Disable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_DOST					(0x0008)
+#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
+/* OS Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SOSTM					(0x000c)
+#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
+/* OS Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTS					(0x0010)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
+/* OS Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTCC					(0x0014)
+/* OS Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_OSTTC					(0x0018)
+/* OS Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIE					(0x001c)
+#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
+/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIA					(0x0020)
+#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
+
+/* Reset DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_RDDT					(0x0040)
+#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
+/* Enable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_EDDT					(0x0044)
+#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
+/* Disable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_DDDT					(0x0048)
+#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
+/* DD Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SDDTM					(0x004c)
+#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
+/* DD Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTS					(0x0050)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
+/* DD Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTCC					(0x0054)
+/* DD Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_DDTTC					(0x0058)
+/* DD Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIE					(0x005c)
+#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
+/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIA					(0x0060)
+#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
+
+/* Reset GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT1					(0x0080)
+#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
+/* Enable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT1					(0x0084)
+#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
+/* Disable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT1					(0x0088)
+#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
+/* GP1 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT1M					(0x008c)
+#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
+/* GP1 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1S					(0x0090)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
+/* GP1 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1CC					(0x0094)
+/* GP1 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT1TC					(0x0098)
+/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IE					(0x009c)
+#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
+/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IA					(0x00a0)
+#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
+
+/* Reset GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT2					(0x00c0)
+#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
+/* Enable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT2					(0x00c4)
+#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
+/* Disable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT2					(0x00c8)
+#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
+/* GP2 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT2M					(0x00cc)
+#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
+/* GP2 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2S					(0x00d0)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
+/* GP2 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2CC					(0x00d4)
+/* GP2 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT2TC					(0x00d8)
+/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IE					(0x00dc)
+#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
+/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IA					(0x00e0)
+#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
+
+/* Clock request control register - all four timers */
+#define U300_TIMER_APP_CRC					(0x100)
+#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
+
+#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+
+/*
+ * The u300_set_mode() function is always called first, if we
+ * have oneshot timer active, the oneshot scheduling function
+ * u300_set_next_event() is called immediately after.
+ */
+static void u300_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Set the periodic mode to a certain number of ticks per
+		 * jiffy.
+		 */
+		writel(TICKS_PER_JIFFY,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/*
+		 * Set continuous mode, so the timer keeps triggering
+		 * interrupts.
+		 */
+		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable timer interrupts */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Then enable the OS timer again */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Just break; here? */
+		/*
+		 * The actual event will be programmed by the next event hook,
+		 * so we just set a dummy value somewhere at the end of the
+		 * universe here.
+		 */
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Expire far in the future, u300_set_next_event() will be
+		 * called soon...
+		 */
+		writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/* We run one shot per tick here! */
+		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable interrupts for this timer */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Enable timer */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* Disable interrupts on GP1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		/* Ignore this call */
+		break;
+	}
+}
+
+/*
+ * The app timer in one shot mode obviously has to be reprogrammed
+ * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+ * the interrupt disable + timer disable commands with a reset command,
+ * it will fail miserably. Apparently (and I found this the hard way)
+ * the timer is very sensitive to the instruction order, though you don't
+ * get that impression from the data sheet.
+ */
+static int u300_set_next_event(unsigned long cycles,
+			       struct clock_event_device *evt)
+
+{
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+	/* IRQ in n * cycles */
+	writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+	/*
+	 * We run one shot per tick here! (This is necessary to reconfigure,
+	 * the timer will tilt if you don't!)
+	 */
+	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+	/* Enable timer interrupts */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Then enable the OS timer again */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+	return 0;
+}
+
+
+/* Use general purpose timer 1 as clock event */
+static struct clock_event_device clockevent_u300_1mhz = {
+	.name           = "GPT1",
+	.rating         = 300, /* Reasonably fast and accurate clock event */
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.set_next_event = u300_set_next_event,
+	.set_mode       = u300_set_mode,
+};
+
+/* Clock event timer interrupt handler */
+static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_u300_1mhz;
+	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
+	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction u300_timer_irq = {
+	.name           = "U300 Timer Tick",
+	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler        = u300_timer_interrupt,
+};
+
+/* Use general purpose timer 2 as clock source */
+static cycle_t u300_get_cycles(struct clocksource *cs)
+{
+	return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+}
+
+static struct clocksource clocksource_u300_1mhz = {
+	.name           = "GPT2",
+	.rating         = 300, /* Reasonably fast and accurate clock source */
+	.read           = u300_get_cycles,
+	.mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/*
+ * This sets up the system timers, clock source and clock event.
+ */
+static void __init u300_timer_init(void)
+{
+	u300_enable_timer_clock();
+	/*
+	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
+	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+	 */
+	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+	writel(U300_TIMER_APP_ROST_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+
+	/* Set up the IRQ handler */
+	setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+
+	/* Reset the General Purpose timer 2 */
+	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+	/* Set this timer to run around forever */
+	writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+	/* Set continuous mode so it wraps around */
+	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+	/* Disable timer interrupts */
+	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+	/* Then enable the GP2 timer to use as a free running us counter */
+	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+
+	/* This is a pure microsecond clock source */
+	clocksource_u300_1mhz.mult =
+		clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+	if (clocksource_register(&clocksource_u300_1mhz))
+		printk(KERN_ERR "timer: failed to initialize clock "
+		       "source %s\n", clocksource_u300_1mhz.name);
+
+	clockevent_u300_1mhz.mult =
+		div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+	/* 32bit counter, so 32bits delta is max */
+	clockevent_u300_1mhz.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
+	/* This timer is slow enough to set for 1 cycle == 1 MHz */
+	clockevent_u300_1mhz.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_u300_1mhz);
+	clockevent_u300_1mhz.cpumask = cpumask_of(0);
+	clockevents_register_device(&clockevent_u300_1mhz);
+	/*
+	 * TODO: init and register the rest of the timers too, they can be
+	 * used by hrtimers!
+	 */
+}
+
+/*
+ * Very simple system timer that only register the clock event and
+ * clock source.
+ */
+struct sys_timer u300_timer = {
+	.init		= u300_timer_init,
+};
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
new file mode 100644
index 00000000000..d2a0b8847a1
--- /dev/null
+++ b/arch/arm/mach-u300/u300.c
@@ -0,0 +1,55 @@
+/*
+ *
+ * arch/arm/mach-u300/u300.c
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform machine definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init u300_init_machine(void)
+{
+	u300_init_devices();
+}
+
+#ifdef CONFIG_MACH_U300_BS2X
+#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS330
+#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
+#endif
+
+MACHINE_START(U300, MACH_U300_STRING)
+	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+	.phys_io	= U300_AHB_PER_PHYS_BASE,
+	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= BOOT_PARAMS_OFFSET,
+	.map_io		= u300_map_io,
+	.init_irq	= u300_init_irq,
+	.timer		= &u300_timer,
+	.init_machine	= u300_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index b3bebcc5623..69214fc8bd1 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
 {
 	unsigned int i;
 
-	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
 
 	set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 0c0c1d63f1c..d50c94f4dbd 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o
+obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
 
 # W90X900 CPU support files
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
new file mode 100644
index 00000000000..f420613cd39
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		(clk->enable)(clk, 1);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		(clk->enable)(clk, 0);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void w90x900_clk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
new file mode 100644
index 00000000000..4f27bda76d5
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void w90x900_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+	unsigned long		cken;
+	unsigned int		enabled;
+	void			(*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_clk_enable,		\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+#define DEF_CLKLOOK(_clk, _devname, _conname)		\
+	{						\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index de29ddcb945..57b5dbabeb4 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -41,7 +41,7 @@ struct sys_timer;
 extern void w90x900_init_irq(void);
 extern void w90p910_init_io(struct map_desc *mach_desc, int size);
 extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(int xtal);
+extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
new file mode 100644
index 00000000000..c72e0dfa182
--- /dev/null
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-w90p910/gpio.c
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#define GPIO_BASE 		(W90X900_VA_GPIO)
+#define GPIO_DIR		(0x04)
+#define GPIO_OUT		(0x08)
+#define GPIO_IN			(0x0C)
+#define GROUPINERV		(0x10)
+#define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
+#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+
+#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = w90p910_dir_input,		\
+			.direction_output = w90p910_dir_output,		\
+			.get		  = w90p910_gpio_get,		\
+			.set		  = w90p910_gpio_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = nr_gpio,			\
+		}							\
+	}
+
+struct w90p910_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*regbase;	/* Base of group register*/
+	spinlock_t 		gpio_lock;
+};
+
+static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	unsigned int regval;
+
+	regval = __raw_readl(pio);
+	regval &= GPIO_GPIO(offset);
+
+	return (regval != 0);
+}
+
+static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+}
+
+static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval &= ~GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval |= GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	regval = __raw_readl(outreg);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, outreg);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static struct w90p910_gpio_chip w90p910_gpio[] = {
+	W90P910_GPIO_CHIP("GROUPC", 0, 16),
+	W90P910_GPIO_CHIP("GROUPD", 16, 10),
+	W90P910_GPIO_CHIP("GROUPE", 26, 14),
+	W90P910_GPIO_CHIP("GROUPF", 40, 10),
+	W90P910_GPIO_CHIP("GROUPG", 50, 17),
+	W90P910_GPIO_CHIP("GROUPH", 67, 8),
+	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+};
+
+void __init w90p910_init_gpio(int nr_group)
+{
+	unsigned	i;
+	struct w90p910_gpio_chip *gpio_chip;
+
+	for (i = 0; i < nr_group; i++) {
+		gpio_chip = &w90p910_gpio[i];
+		spin_lock_init(&gpio_chip->gpio_lock);
+		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
+		gpiochip_add(&gpio_chip->chip);
+	}
+}
diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
new file mode 100644
index 00000000000..034da3e390c
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-w90p910/include/mach/gpio.h
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_W90P910_GPIO_H
+#define __ASM_ARCH_W90P910_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
index 1c583f9cbcd..9d5cba3a509 100644
--- a/arch/arm/mach-w90x900/include/mach/irqs.h
+++ b/arch/arm/mach-w90x900/include/mach/irqs.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/irqs.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -31,6 +29,11 @@
 /* Main cpu interrupts */
 
 #define IRQ_WDT		W90X900_IRQ(1)
+#define IRQ_GROUP0	W90X900_IRQ(2)
+#define IRQ_GROUP1	W90X900_IRQ(3)
+#define IRQ_ACTL	W90X900_IRQ(4)
+#define IRQ_LCD		W90X900_IRQ(5)
+#define IRQ_RTC		W90X900_IRQ(6)
 #define IRQ_UART0	W90X900_IRQ(7)
 #define IRQ_UART1	W90X900_IRQ(8)
 #define IRQ_UART2	W90X900_IRQ(9)
@@ -39,7 +42,45 @@
 #define IRQ_TIMER0	W90X900_IRQ(12)
 #define IRQ_TIMER1	W90X900_IRQ(13)
 #define IRQ_T_INT_GROUP	W90X900_IRQ(14)
+#define IRQ_USBH	W90X900_IRQ(15)
+#define IRQ_EMCTX	W90X900_IRQ(16)
+#define IRQ_EMCRX	W90X900_IRQ(17)
+#define IRQ_GDMAGROUP	W90X900_IRQ(18)
+#define IRQ_DMAC	W90X900_IRQ(19)
+#define IRQ_FMI		W90X900_IRQ(20)
+#define IRQ_USBD	W90X900_IRQ(21)
+#define IRQ_ATAPI	W90X900_IRQ(22)
+#define IRQ_G2D		W90X900_IRQ(23)
+#define IRQ_PCI		W90X900_IRQ(24)
+#define IRQ_SCGROUP	W90X900_IRQ(25)
+#define IRQ_I2CGROUP	W90X900_IRQ(26)
+#define IRQ_SSP		W90X900_IRQ(27)
+#define IRQ_PWM		W90X900_IRQ(28)
+#define IRQ_KPI		W90X900_IRQ(29)
+#define IRQ_P2SGROUP	W90X900_IRQ(30)
 #define IRQ_ADC		W90X900_IRQ(31)
 #define NR_IRQS		(IRQ_ADC+1)
 
+/*for irq group*/
+
+#define	IRQ_PS2_PORT0	0x10000000
+#define	IRQ_PS2_PORT1	0x20000000
+#define	IRQ_I2C_LINE0	0x04000000
+#define	IRQ_I2C_LINE1	0x08000000
+#define	IRQ_SC_CARD0	0x01000000
+#define	IRQ_SC_CARD1	0x02000000
+#define	IRQ_GDMA_CH0	0x00100000
+#define	IRQ_GDMA_CH1	0x00200000
+#define	IRQ_TIMER2	0x00010000
+#define	IRQ_TIMER3	0x00020000
+#define	IRQ_TIMER4	0x00040000
+#define	IRQ_GROUP0_IRQ0	0x00000001
+#define	IRQ_GROUP0_IRQ1	0x00000002
+#define	IRQ_GROUP0_IRQ2	0x00000004
+#define	IRQ_GROUP0_IRQ3	0x00000008
+#define	IRQ_GROUP1_IRQ4	0x00000010
+#define	IRQ_GROUP1_IRQ5	0x00000020
+#define	IRQ_GROUP1_IRQ6	0x00000040
+#define	IRQ_GROUP1_IRQ7	0x00000080
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h
index 79320ebe614..1a209530411 100644
--- a/arch/arm/mach-w90x900/include/mach/map.h
+++ b/arch/arm/mach-w90x900/include/mach/map.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/map.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -34,7 +32,6 @@
  * interrupt controller is the first thing we put in, to make
  * the assembly code for the irq detection easier
  */
-
 #define W90X900_VA_IRQ		W90X900_ADDR(0x00000000)
 #define W90X900_PA_IRQ		(0xB8002000)
 #define W90X900_SZ_IRQ		SZ_4K
@@ -44,33 +41,117 @@
 #define W90X900_SZ_GCR		SZ_4K
 
 /* Clock and Power management */
-
 #define W90X900_VA_CLKPWR	(W90X900_VA_GCR+0x200)
 #define W90X900_PA_CLKPWR	(0xB0000200)
 #define W90X900_SZ_CLKPWR	SZ_4K
 
 /* EBI management */
-
 #define W90X900_VA_EBI		W90X900_ADDR(0x00001000)
 #define W90X900_PA_EBI		(0xB0001000)
 #define W90X900_SZ_EBI		SZ_4K
 
 /* UARTs */
-
 #define W90X900_VA_UART		W90X900_ADDR(0x08000000)
 #define W90X900_PA_UART		(0xB8000000)
 #define W90X900_SZ_UART		SZ_4K
 
 /* Timers */
-
 #define W90X900_VA_TIMER	W90X900_ADDR(0x08001000)
 #define W90X900_PA_TIMER	(0xB8001000)
 #define W90X900_SZ_TIMER	SZ_4K
 
 /* GPIO ports */
-
 #define W90X900_VA_GPIO		W90X900_ADDR(0x08003000)
 #define W90X900_PA_GPIO		(0xB8003000)
 #define W90X900_SZ_GPIO		SZ_4K
 
+/* GDMA control */
+#define W90X900_VA_GDMA		W90X900_ADDR(0x00004000)
+#define W90X900_PA_GDMA		(0xB0004000)
+#define W90X900_SZ_GDMA		SZ_4K
+
+/* USB host controller*/
+#define W90X900_VA_USBEHCIHOST	W90X900_ADDR(0x00005000)
+#define W90X900_PA_USBEHCIHOST	(0xB0005000)
+#define W90X900_SZ_USBEHCIHOST	SZ_4K
+
+#define W90X900_VA_USBOHCIHOST	W90X900_ADDR(0x00007000)
+#define W90X900_PA_USBOHCIHOST	(0xB0007000)
+#define W90X900_SZ_USBOHCIHOST	SZ_4K
+
+/* I2C hardware controller */
+#define W90X900_VA_I2C		W90X900_ADDR(0x08006000)
+#define W90X900_PA_I2C		(0xB8006000)
+#define W90X900_SZ_I2C		SZ_4K
+
+/* Keypad Interface*/
+#define W90X900_VA_KPI		W90X900_ADDR(0x08008000)
+#define W90X900_PA_KPI		(0xB8008000)
+#define W90X900_SZ_KPI		SZ_4K
+
+/* Smart card host*/
+#define W90X900_VA_SC		W90X900_ADDR(0x08005000)
+#define W90X900_PA_SC		(0xB8005000)
+#define W90X900_SZ_SC		SZ_4K
+
+/* LCD controller*/
+#define W90X900_VA_LCD		W90X900_ADDR(0x00008000)
+#define W90X900_PA_LCD		(0xB0008000)
+#define W90X900_SZ_LCD		SZ_4K
+
+/* 2D controller*/
+#define W90X900_VA_GE		W90X900_ADDR(0x0000B000)
+#define W90X900_PA_GE		(0xB000B000)
+#define W90X900_SZ_GE		SZ_4K
+
+/* ATAPI */
+#define W90X900_VA_ATAPI	W90X900_ADDR(0x0000A000)
+#define W90X900_PA_ATAPI	(0xB000A000)
+#define W90X900_SZ_ATAPI	SZ_4K
+
+/* ADC */
+#define W90X900_VA_ADC		W90X900_ADDR(0x0800A000)
+#define W90X900_PA_ADC		(0xB800A000)
+#define W90X900_SZ_ADC		SZ_4K
+
+/* PS2 Interface*/
+#define W90X900_VA_PS2		W90X900_ADDR(0x08009000)
+#define W90X900_PA_PS2		(0xB8009000)
+#define W90X900_SZ_PS2		SZ_4K
+
+/* RTC */
+#define W90X900_VA_RTC		W90X900_ADDR(0x08004000)
+#define W90X900_PA_RTC		(0xB8004000)
+#define W90X900_SZ_RTC		SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+#define W90X900_VA_PWM		W90X900_ADDR(0x08007000)
+#define W90X900_PA_PWM		(0xB8007000)
+#define W90X900_SZ_PWM		SZ_4K
+
+/* Audio Controller controller */
+#define W90X900_VA_ACTL		W90X900_ADDR(0x00009000)
+#define W90X900_PA_ACTL		(0xB0009000)
+#define W90X900_SZ_ACTL		SZ_4K
+
+/* DMA controller */
+#define W90X900_VA_DMA		W90X900_ADDR(0x0000c000)
+#define W90X900_PA_DMA		(0xB000c000)
+#define W90X900_SZ_DMA		SZ_4K
+
+/* FMI controller */
+#define W90X900_VA_FMI		W90X900_ADDR(0x0000d000)
+#define W90X900_PA_FMI		(0xB000d000)
+#define W90X900_SZ_FMI		SZ_4K
+
+/* USB Device port */
+#define W90X900_VA_USBDEV	W90X900_ADDR(0x00006000)
+#define W90X900_PA_USBDEV	(0xB0006000)
+#define W90X900_SZ_USBDEV	SZ_4K
+
+/* External MAC control*/
+#define W90X900_VA_EMC		W90X900_ADDR(0x00003000)
+#define W90X900_PA_EMC		(0xB0003000)
+#define W90X900_SZ_EMC		SZ_4K
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
new file mode 100644
index 00000000000..f10b6a8dc06
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers  */
+#define CLK_BA		W90X900_VA_CLKPWR
+#define REG_CLKEN	(CLK_BA + 0x00)
+#define REG_CLKSEL	(CLK_BA + 0x04)
+#define REG_CLKDIV	(CLK_BA + 0x08)
+#define REG_PLLCON0	(CLK_BA + 0x0C)
+#define REG_PLLCON1	(CLK_BA + 0x10)
+#define REG_PMCON	(CLK_BA + 0x14)
+#define REG_IRQWAKECON	(CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG	(CLK_BA + 0x1C)
+#define REG_IPSRST	(CLK_BA + 0x20)
+#define REG_CLKEN1	(CLK_BA + 0x24)
+#define REG_CLKDIV1	(CLK_BA + 0x28)
+
+#endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/include/mach/regs-usb.h
new file mode 100644
index 00000000000..ab74b0c2480
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-usb.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-usb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+/* usb Control Registers  */
+#define USBH_BA		W90X900_VA_USBEHCIHOST
+#define USBD_BA		W90X900_VA_USBDEV
+#define USBO_BA		W90X900_VA_USBOHCIHOST
+
+/* USB Host Control Registers */
+#define REG_UPSCR0	(USBH_BA+0x064)
+#define REG_UPSCR1	(USBH_BA+0x068)
+#define REG_USBPCR0	(USBH_BA+0x0C4)
+#define REG_USBPCR1	(USBH_BA+0x0C8)
+
+/* USBH OHCI Control Registers */
+#define REG_OpModEn	(USBO_BA+0x204)
+/*This bit controls the polarity of over
+*current flag from external power IC.
+*/
+#define OCALow		0x08
+
+#endif /*  __ASM_ARCH_REGS_USB_H */
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 726ff6798a5..7a62bd348e8 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -3,15 +3,13 @@
  *
  * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
  *
- * Copyright (C) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (C) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -80,6 +78,156 @@ static struct platform_device w90p910_flash_device = {
 	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
 };
 
+/* USB EHCI Host Controller */
+
+static struct resource w90x900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+struct platform_device w90x900_device_usb_ehci = {
+	.name		  = "w90x900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
+	.resource	  = w90x900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ehci);
+
+/* USB OHCI Host Controller */
+
+static struct resource w90x900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
+struct platform_device w90x900_device_usb_ohci = {
+	.name		  = "w90x900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
+	.resource	  = w90x900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ohci);
+
+/*TouchScreen controller*/
+
+static struct resource w90x900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_ts = {
+	.name		= "w90x900-ts",
+	.id		= -1,
+	.resource	= w90x900_ts_resource,
+	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
+};
+EXPORT_SYMBOL(w90x900_device_ts);
+
+/* RTC controller*/
+
+static struct resource w90x900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_rtc = {
+	.name		= "w90x900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
+	.resource	= w90x900_rtc_resource,
+};
+EXPORT_SYMBOL(w90x900_device_rtc);
+
+/* KPI controller*/
+
+static struct resource w90x900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device w90x900_device_kpi = {
+	.name		= "w90x900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
+	.resource	= w90x900_kpi_resource,
+};
+EXPORT_SYMBOL(w90x900_device_kpi);
+
+/* USB Device (Gadget)*/
+
+static struct resource w90x900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device w90x900_device_usbgadget = {
+	.name		= "w90x900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
+	.resource	= w90x900_usbgadget_resource,
+};
+EXPORT_SYMBOL(w90x900_device_usbgadget);
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -88,12 +236,18 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_serial_device,
 	&w90p910_flash_device,
+	&w90x900_device_usb_ehci,
+	&w90x900_device_usb_ohci,
+	&w90x900_device_ts,
+	&w90x900_device_rtc,
+	&w90x900_device_kpi,
+	&w90x900_device_usbgadget,
 };
 
 static void __init w90p910evb_map_io(void)
 {
 	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks(0);
+	w90p910_init_clocks();
 }
 
 static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
new file mode 100644
index 00000000000..a3520fefb5e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+static DECLARE_MUTEX(mfp_sem);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
+			mfpen &= (~GPSELC);/*enable kpi*/
+			mfpen |= ENKPI;
+		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
+				mfpen &= (~GPSELC);/*enable nand*/
+				mfpen |= ENNAND;
+			} else
+				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev, int gpio)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+		else if (strcmp(dev_id, "w90p910-atapi") == 0)
+			mfpen |= GPSELEI0;/*enable atapi*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 2bcbaa681b9..1c97e4930b7 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -3,8 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -12,8 +11,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -36,6 +34,7 @@
 #include <mach/regs-serial.h>
 
 #include "cpu.h"
+#include "clock.h"
 
 /* Initial IO mappings */
 
@@ -45,9 +44,52 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(EBI),
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(ADC),
+	IODESC_ENT(RTC),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
 	/*IODESC_ENT(LCD),*/
 };
 
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+
+static struct clk_lookup w90p910_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+};
+
 /* Initial serial platform data */
 
 struct plat_serial8250_port w90p910_uart_data[] = {
@@ -77,8 +119,9 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 
 /*Init W90P910 clock*/
 
-void __init w90p910_init_clocks(int xtal)
+void __init w90p910_init_clocks(void)
 {
+	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
 }
 
 static int __init w90p910_init_cpu(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 20979564e7e..83c025e72ce 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
@@ -416,7 +416,7 @@ config CPU_32v6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -639,10 +639,23 @@ config CPU_BIG_ENDIAN
 	  port must properly enable any big-endian related features
 	  of your chipset/board/processor.
 
+config CPU_ENDIAN_BE8
+	bool
+	depends on CPU_BIG_ENDIAN
+	default CPU_V6 || CPU_V7
+	help
+	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
+
+config CPU_ENDIAN_BE32
+	bool
+	depends on CPU_BIG_ENDIAN
+	default !CPU_ENDIAN_BE8
+	help
+	  Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
+
 config CPU_HIGH_VECTOR
 	depends on !MMU && CPU_CP15 && !CPU_ARM740T
 	bool "Select the High exception vector"
-	default n
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
 	  The exception vector can be vary depending on the platform
@@ -726,7 +739,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 
 config OUTER_CACHE
 	bool
-	default n
 
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
@@ -739,7 +751,6 @@ config CACHE_FEROCEON_L2
 config CACHE_FEROCEON_L2_WRITETHROUGH
 	bool "Force Feroceon L2 cache write through"
 	depends on CACHE_FEROCEON_L2
-	default n
 	help
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
@@ -747,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 6f7e70907e4..f332df7f0d3 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -37,6 +37,9 @@ ENTRY(v6_early_abort)
 	movne	pc, lr
 	do_thumb_abort
 	ldreq	r3, [r2]			@ read aborted ARM instruction
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r3, r3
+#endif
 	do_ldrd_abort
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3be60..0ab75c60f7c 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn,
 	return err;
 }
 
+int ioremap_page(unsigned long virt, unsigned long phys,
+		 const struct mem_type *mtype)
+{
+	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
 
 void __check_kvm_seq(struct mm_struct *mm)
 {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ece00c..fdaa9bb87c1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type)
 {
 	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 }
+EXPORT_SYMBOL(get_mem_type);
 
 /*
  * Adjust the PMD section entries according to the CPU in use.
@@ -839,6 +840,20 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+	if (machine_is_u300()) {
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+		res_size = 0x00100000;
+#endif
+#endif
+	}
+
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 087e239704d..524ddae9259 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -170,6 +170,9 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a08d9d2380d..180a08d03a0 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,17 +19,23 @@
 
 #include "proc-macros.S"
 
-#define TTB_C		(1 << 0)
 #define TTB_S		(1 << 1)
 #define TTB_RGN_NC	(0 << 3)
 #define TTB_RGN_OC_WBWA	(1 << 3)
 #define TTB_RGN_OC_WT	(2 << 3)
 #define TTB_RGN_OC_WB	(3 << 3)
+#define TTB_NOS		(1 << 5)
+#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
 
 #ifndef CONFIG_SMP
-#define TTB_FLAGS	TTB_C|TTB_RGN_OC_WB		@ mark PTWs cacheable, outer WB
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
 #else
-#define TTB_FLAGS	TTB_C|TTB_S|TTB_RGN_OC_WBWA	@ mark PTWs cacheable and shared, outer WBWA
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
 #endif
 
 ENTRY(cpu_v7_proc_init)
@@ -176,8 +182,8 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
-	orr	r0, r0, #(0x1 << 6)
+	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode and
+	orr	r0, r0, #(1 << 6) | (1 << 0)	@ TLB ops broadcasting
 	mcr	p15, 0, r0, c1, c0, 1
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
@@ -227,12 +233,43 @@ __v7_setup:
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
-	ldr	r5, =0xff0aa1a8
-	ldr	r6, =0x40e040e0
+	/*
+	 * Memory region attributes with SCTLR.TRE=1
+	 *
+	 *   n = TEX[0],C,B
+	 *   TR = PRRR[2n+1:2n]		- memory type
+	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
+	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
+	 *
+	 *			n	TR	IR	OR
+	 *   UNCACHED		000	00
+	 *   BUFFERABLE		001	10	00	00
+	 *   WRITETHROUGH	010	10	10	10
+	 *   WRITEBACK		011	10	11	11
+	 *   reserved		110
+	 *   WRITEALLOC		111	10	01	01
+	 *   DEV_SHARED		100	01
+	 *   DEV_NONSHARED	100	01
+	 *   DEV_WC		001	10
+	 *   DEV_CACHED		011	10
+	 *
+	 * Other attributes:
+	 *
+	 *   DS0 = PRRR[16] = 0		- device shareable property
+	 *   DS1 = PRRR[17] = 1		- device shareable property
+	 *   NS0 = PRRR[18] = 0		- normal shareable property
+	 *   NS1 = PRRR[19] = 1		- normal shareable property
+	 *   NOS = PRRR[24+n] = 1	- not outer shareable
+	 */
+	ldr	r5, =0xff0a81a8			@ PRRR
+	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
@@ -240,14 +277,14 @@ __v7_setup:
 ENDPROC(__v7_setup)
 
 	/*   AT
-	 *  TFR   EV X F   I D LR
-	 * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+	 *  TFR   EV X F   I D LR    S
+	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
 	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *    1    0 110       0011 1.00 .111 1101 < we want
+	 *    1    0 110       0011 1100 .111 1101 < we want
 	 */
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
+	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
 
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b637e7380ab..a26a605b73b 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -42,9 +42,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	mov	r1, r1, lsl #PAGE_SHIFT
 	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA (was 1)
-	tst	r2, #VM_EXEC			@ Executable area ?
-	mcrne	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA (was 1)
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -69,8 +71,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA
-	mcr	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable)
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -87,5 +92,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
 ENTRY(v7wbi_tlb_fns)
 	.long	v7wbi_flush_user_tlb_range
 	.long	v7wbi_flush_kern_tlb_range
-	.long	v6wbi_tlb_flags
+	.long	v7wbi_tlb_flags
 	.size	v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 853d42bb868..4ce0f9801e2 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -41,6 +41,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
+#include <mach/board-eb.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e9906d5..8986b741223 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR
 config MXC_PWM
 	tristate "Enable PWM driver"
 	depends on ARCH_MXC
+	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config ARCH_HAS_RNGA
+	bool
+	depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+	bool
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 055406312b6..e3212c8ff42 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e95798cc3..7506d963be4 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq)
 	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
 }
 
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
 static int gpio_set_irq_type(u32 irq, u32 type)
 {
 	u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	int edge;
 	void __iomem *reg = port->base;
 
+	port->both_edges &= ~(1 << (gpio & 31));
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = mxc_gpio_get(&port->chip, gpio & 31);
+		if (val) {
+			edge = GPIO_INT_LOW_LEV;
+			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+		} else {
+			edge = GPIO_INT_HIGH_LEV;
+			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+		}
+		port->both_edges |= 1 << (gpio & 31);
+		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
+	default:
 		return -EINVAL;
 	}
 
@@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	return 0;
 }
 
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+	void __iomem *reg = port->base;
+	u32 bit, val;
+	int edge;
+
+	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+	bit = gpio & 0xf;
+	val = __raw_readl(reg);
+	edge = (val >> (bit << 1)) & 3;
+	val &= ~(0x3 << (bit << 1));
+	switch (edge) {
+	case GPIO_INT_HIGH_LEV:
+		edge = GPIO_INT_LOW_LEV;
+		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+		break;
+	case GPIO_INT_LOW_LEV:
+		edge = GPIO_INT_HIGH_LEV;
+		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+		break;
+	default:
+		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+		       gpio, edge);
+		return;
+	}
+	__raw_writel(val | (edge << (bit << 1)), reg);
+}
+
 /* handle n interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
@@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 
 	gpio_irq_no = port->virtual_irq_start;
 	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+		u32 gpio = irq_to_gpio(gpio_irq_no);
 
 		if ((irq_stat & 1) == 0)
 			continue;
 
 		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+		if (port->both_edges & (1 << (gpio & 31)))
+			mxc_flip_edge(port, gpio);
+
 		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
 				&irq_desc[gpio_irq_no]);
 	}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
new file mode 100644
index 00000000000..8769e910e55
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 00000000000..06701df74c4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
new file mode 100644
index 00000000000..a870f8ea244
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 00000000000..552b55d714d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72ada13..06e6895f7f6 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
new file mode 100644
index 00000000000..78cf31e22e4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LILLY_NOBOARD	= 0,
+	MX31LILLY_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7d..52fbdf2d6f2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_MAX_EXP_IO_LINES	16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE		SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE	SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1babb7..303fd2434a2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316d0f5..519bab3eb28 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
 #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
new file mode 100644
index 00000000000..1111037d6d9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8f..f0a1fa1938a 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90..4fcd7499e09 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
new file mode 100644
index 00000000000..15fbdf16abc
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762dd45c..04033ec637d 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72644d..02c3cd004db 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
 struct platform_device;
 struct clk;
 
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk);
 extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f773148bc2..bbc5f6753cf 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
 #ifdef CONFIG_MACH_MX27ADS
 #include <mach/board-mx27ads.h>
 #endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
 #endif
@@ -34,6 +37,21 @@
 #ifdef CONFIG_MACH_QONG
 #include <mach/board-qong.h>
 #endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1090f..894d2f87c85 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@ struct mxc_gpio_port {
 	int irq;
 	int virtual_irq_start;
 	struct gpio_chip chip;
+	u32 both_edges;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index f9bd17dd8dd..4adec9b154d 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -24,7 +24,7 @@
 
 struct imxuart_platform_data {
 	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
 	unsigned int flags;
 	void (*irda_enable)(int enable);
 	unsigned int irda_inv_rx:1;
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0430e..9f0101157ec 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@ struct imx_fb_platform_data {
 	u_char * fixed_screen_cpu;
 	dma_addr_t fixed_screen_dma;
 
-	int (*init)(struct platform_device*);
-	int (*exit)(struct platform_device*);
+	int (*init)(struct platform_device *);
+	void (*exit)(struct platform_device *);
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a1fd3..27f8d1b2bc6 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@ enum iomux_gp_func {
  * 	- setups the iomux according to the configuration
  * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
@@ -633,6 +633,40 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 00000000000..00b0ac1db22
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*									  PAD    MUX   ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1				IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K				IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4				IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2				IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO				IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5				IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6				IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0				IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1				IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO				IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0				IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0				IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B				IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO					IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8					IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY				IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7					IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10					IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16				IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17				IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18				IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19				IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20				IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21				IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22				IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23				IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24				IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25				IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0				IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1				IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2				IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3				IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4				IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5				IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6				IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7				IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8				IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9				IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10				IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11				IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12				IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13				IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14				IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15				IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16				IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17				IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18				IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19				IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20				IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21				IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22				IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23				IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24				IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25				IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26				IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27				IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28				IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29				IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30				IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31				IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE					IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0				IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1				IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3				IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2				IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3				IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4				IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B				IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1				IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20					IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5				IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2					IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2					IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2				IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21					IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22				IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB				IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA				IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW					IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS				IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS				IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18				IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19				IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20				IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21				IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22				IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB				IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD				IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23					IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15				IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14				IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13				IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12				IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11				IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10				IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9				IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8				IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7				IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6				IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5				IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4				IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3				IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2				IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1				IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0				IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0				IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20				IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1				IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21				IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2				IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22				IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3				IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23				IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0				IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24				IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1				IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25				IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2				IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26				IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3				IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27				IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28				IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24				IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25				IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26				IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27				IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28				IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29				IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30					IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31				IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI				IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0					IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO				IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1					IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK				IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2					IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY				IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3				IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR				IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4					IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR					IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5					IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR				IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0				IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6					IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT				IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7					IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0				IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2				IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST					IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8					IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1				IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3					IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT				IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9					IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2				IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3				IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR				IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10				IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR				IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11				IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL				IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12				IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA				IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13				IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0				IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1					IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY				IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2					IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3				IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI					IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14					IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6				IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1					IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0					IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3					IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B				IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD					IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15					IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7				IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2					IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX				IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI				IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4				IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6					IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX				IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO				IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5				IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7					IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS				IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK				IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL					IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0				IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6				IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8					IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS				IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY				IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA					IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1				IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7				IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9					IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX				IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4				IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10					IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX				IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5				IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11					IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS				IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN				IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2				IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6				IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12					IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX				IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS				IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN				IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3				IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7				IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13					IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX				IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK					IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS					IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI					IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO					IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB				IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B					IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD				IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15				IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0					IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1					IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2					IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3					IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4					IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5					IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6					IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7					IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8					IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10					IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11					IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12					IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13					IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14					IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15					IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16					IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2				IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17					IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD				IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24					IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1				IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK				IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25					IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0				IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0				IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26					IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1				IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27					IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR				IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2				IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28					IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD				IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3				IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29					IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30				IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0				IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1				IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2				IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3				IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4				IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5				IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6				IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS				IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7				IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8				IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9				IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10				IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11				IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL				IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0				IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA				IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1				IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2				IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3				IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS				IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4				IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS				IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5				IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0				IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6				IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1				IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7				IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8				IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9				IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10				IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12				IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13				IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14				IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15				IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6e8, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6e8, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6e8, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17				IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18				IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR				IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19				IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR				IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20				IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS				IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI				IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21				IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS				IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD				IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22				IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23				IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24				IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25				IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26				IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27				IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28				IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0				IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1				IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0				IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1				IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2				IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1				IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2				IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3				IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2				IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3				IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4				IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5				IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL				IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS				IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY				IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9				IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI				IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC				IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD				IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13				IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14				IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS				IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5				IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17				IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 00000000000..7cd84547658
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+	unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+	unsigned mux_mode:8;
+	unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define	NO_PAD_CTRL	(1 << 16)
+	unsigned pad_ctrl:17;
+	unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+	unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+		_select_input, _pad_ctrl)				\
+		{							\
+			.mux_ctrl_ofs     = _mux_ctrl_ofs,		\
+			.mux_mode         = _mux_mode,			\
+			.pad_ctrl_ofs     = _pad_ctrl_ofs,		\
+			.pad_ctrl         = _pad_ctrl,			\
+			.select_input_ofs = _select_input_ofs,		\
+			.select_input     = _select_input,		\
+		}
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
+
+#define PAD_CTL_NO_HYSTERESIS		0
+#define PAD_CTL_HYSTERESIS		1
+
+#define PAD_CTL_PULL_DISABLED		0x0
+#define PAD_CTL_PULL_KEEPER		0xa
+#define PAD_CTL_PULL_DOWN_100K		0xc
+#define PAD_CTL_PULL_UP_47K		0xd
+#define PAD_CTL_PULL_UP_100K		0xe
+#define PAD_CTL_PULL_UP_22K		0xf
+
+#define PAD_CTL_OUTPUT_CMOS		0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM	0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
+#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+
+#define PAD_CTL_SLEW_RATE_SLOW		0
+#define PAD_CTL_SLEW_RATE_FAST		1
+
+/*
+ * setups a single pad:
+ * 	- reserves the pad so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * 	- make it available for a future use by another driver
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f3f..6065e00176e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define CONSISTENT_DMA_SIZE SZ_4M
 #endif /* CONFIG_MX1_VIDEO */
 
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e02324d8..1000bf330bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c6085d5..b559a4bb576 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
 #define CS4_SIZE		SZ_32M
 
 #define CS5_BASE_ADDR		0xB6000000
+#define CS5_BASE_ADDR_VIRT	0xF6000000
+#define CS5_SIZE		SZ_32M
+
 #define PCMCIA_MEM_BASE_ADDR	0xBC000000
 
 /*
@@ -191,6 +194,9 @@
 #define CS4_IO_ADDRESS(x)  \
 	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
 
+#define CS5_IO_ADDRESS(x)  \
+	(((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
 #define X_MEMC_IO_ADDRESS(x)  \
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a134744..00000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT		TIM1_INT
-
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_CLK_TIN		(3<<1)
-#define TCTL_CLK_32		(4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG		(1<<6)
-#define TCTL_FRR		(1<<9)
-#define TCTL_WAITEN		(1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1		(1<<0)
-#define TSTAT_OF2		(1<<1)
-#define TSTAT_OF3		(1<<2)
-#define TSTAT_IF1		(1<<3)
-#define TSTAT_IF2		(1<<4)
-#define TSTAT_ROV		(1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR		(1<<15)
-#define TCTL_CC			(1<<10)
-#define TCTL_OM			(1<<9)
-#define TCTL_CAP_RIS		(1<<6)
-#define TCTL_CAP_FAL		(2<<6)
-#define TCTL_CAP_RIS_FAL	(3<<6)
-#define TCTL_CAP_ENA		(1<<5)
-#define TCTL_TEN		(1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb3086f1..be273371f34 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
 
 struct imxusb_platform_data {
 	int (*init)(struct device *);
-	int (*exit)(struct device *);
+	void (*exit)(struct device *);
 };
 
 #endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 00000000000..77a078f9513
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+		return -EBUSY;
+	if (pad->mux_ctrl_ofs)
+		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+	if (pad->select_input_ofs)
+		__raw_writel(pad->select_input,
+				IOMUX_BASE + pad->select_input_ofs);
+
+	if (!(pad->pad_ctrl & NO_PAD_CTRL))
+		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_v3_setup_pad(p);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_v3_release_multiple_pads(pad_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_v3_release_pad(p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a531f5..8aee76304f8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 
-#define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
-#define AVIC_NIMASK		(AVIC_BASE + 0x04)	/* int mask reg */
-#define AVIC_INTENNUM		(AVIC_BASE + 0x08)	/* int enable number reg */
-#define AVIC_INTDISNUM		(AVIC_BASE + 0x0C)	/* int disable number reg */
-#define AVIC_INTENABLEH		(AVIC_BASE + 0x10)	/* int enable reg high */
-#define AVIC_INTENABLEL		(AVIC_BASE + 0x14)	/* int enable reg low */
-#define AVIC_INTTYPEH		(AVIC_BASE + 0x18)	/* int type reg high */
-#define AVIC_INTTYPEL		(AVIC_BASE + 0x1C)	/* int type reg low */
-#define AVIC_NIPRIORITY(x)	(AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR		(AVIC_BASE + 0x40)	/* norm int vector/status */
-#define AVIC_FIVECSR		(AVIC_BASE + 0x44)	/* fast int vector/status */
-#define AVIC_INTSRCH		(AVIC_BASE + 0x48)	/* int source reg high */
-#define AVIC_INTSRCL		(AVIC_BASE + 0x4C)	/* int source reg low */
-#define AVIC_INTFRCH		(AVIC_BASE + 0x50)	/* int force reg high */
-#define AVIC_INTFRCL		(AVIC_BASE + 0x54)	/* int force reg low */
-#define AVIC_NIPNDH		(AVIC_BASE + 0x58)	/* norm int pending high */
-#define AVIC_NIPNDL		(AVIC_BASE + 0x5C)	/* norm int pending low */
-#define AVIC_FIPNDH		(AVIC_BASE + 0x60)	/* fast int pending high */
-#define AVIC_FIPNDL		(AVIC_BASE + 0x64)	/* fast int pending low */
-
-#define SYSTEM_PREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH		3
-#define IIM_PROD_REV_LEN	5
+#define AVIC_INTCNTL		0x00	/* int control reg */
+#define AVIC_NIMASK		0x04	/* int mask reg */
+#define AVIC_INTENNUM		0x08	/* int enable number reg */
+#define AVIC_INTDISNUM		0x0C	/* int disable number reg */
+#define AVIC_INTENABLEH		0x10	/* int enable reg high */
+#define AVIC_INTENABLEL		0x14	/* int enable reg low */
+#define AVIC_INTTYPEH		0x18	/* int type reg high */
+#define AVIC_INTTYPEL		0x1C	/* int type reg low */
+#define AVIC_NIPRIORITY(x)	(0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR		0x40	/* norm int vector/status */
+#define AVIC_FIVECSR		0x44	/* fast int vector/status */
+#define AVIC_INTSRCH		0x48	/* int source reg high */
+#define AVIC_INTSRCL		0x4C	/* int source reg low */
+#define AVIC_INTFRCH		0x50	/* int force reg high */
+#define AVIC_INTFRCL		0x54	/* int force reg low */
+#define AVIC_NIPNDH		0x58	/* norm int pending high */
+#define AVIC_NIPNDL		0x5C	/* norm int pending low */
+#define AVIC_FIPNDH		0x60	/* fast int pending high */
+#define AVIC_FIPNDL		0x64	/* fast int pending low */
+
+static void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 	if (irq >= MXC_INTERNAL_IRQS)
 		return -EINVAL;;
 
-	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
-	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
 
 	return 0;
 #else
@@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	if (irq < MXC_INTERNAL_IRQS / 2) {
-		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
 	} else {
 		irq -= MXC_INTERNAL_IRQS / 2;
-		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
@@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq);
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTDISNUM);
+	__raw_writel(irq, avic_base + AVIC_INTDISNUM);
 }
 
 /* Enable interrupt number "irq" in the AVIC */
 static void mxc_unmask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTENNUM);
+	__raw_writel(irq, avic_base + AVIC_INTENNUM);
 }
 
 static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@ void __init mxc_init_irq(void)
 {
 	int i;
 
+	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
-	__raw_writel(0, AVIC_INTCNTL);
-	__raw_writel(0x1f, AVIC_NIMASK);
+	__raw_writel(0, avic_base + AVIC_INTCNTL);
+	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
 
 	/* disable all interrupts */
-	__raw_writel(0, AVIC_INTENABLEH);
-	__raw_writel(0, AVIC_INTENABLEL);
+	__raw_writel(0, avic_base + AVIC_INTENABLEH);
+	__raw_writel(0, avic_base + AVIC_INTENABLEL);
 
 	/* all IRQ no FIQ */
-	__raw_writel(0, AVIC_INTTYPEH);
-	__raw_writel(0, AVIC_INTTYPEL);
+	__raw_writel(0, avic_base + AVIC_INTTYPEH);
+	__raw_writel(0, avic_base + AVIC_INTTYPEL);
 	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
 		set_irq_chip(i, &mxc_avic_chip);
 		set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@ void __init mxc_init_irq(void)
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
-		__raw_writel(0, AVIC_NIPRIORITY(i));
+		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
@@ -154,3 +152,4 @@ void __init mxc_init_irq(void)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc507cc..ae34198a79d 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC    0x00   /* PWM Control Register */
+#define MX1_PWMS    0x04   /* PWM Sample Register */
+#define MX1_PWMP    0x08   /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR                 0x00    /* PWM Control Register */
+#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
+#define MX3_PWMPR                 0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN              (1 << 0)
+
 
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Sample Register		*/
-#define PWMPR	0x08	/* PWM Period Register		*/
-#define PWMCNR	0x0C	/* PWM Counter Register		*/
-
-#define PWMCR_HCTR		(1 << 18)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 17)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_SWR		(1 << 16)		/* Software Reset		*/
-#define PWMCR_CLKSRC_PERCLK	(0 << 15)		/* PERCLK Clock Source		*/
-#define PWMCR_CLKSRC_CLK32	(1 << 15)		/* 32KHz Clock Source		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMCR_IRQ		(1 << 7)		/* Interrupt Request		*/
-#define PWMCR_IRQEN		(1 << 6)		/* Interrupt Request Enable	*/
-#define PWMCR_FIFOAV		(1 << 5)		/* FIFO Available		*/
-#define PWMCR_EN		(1 << 4)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMCR_DIV(x)		(((x) & 0x03) << 0)	/* Clock divider 2/4/8/16	*/
-
-#define MAX_DIV			(128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Status Register		*/
-#define PWMIR	0x08	/* PWM Interrupt Register	*/
-#define PWMSAR	0x0C	/* PWM Sample Register		*/
-#define PWMPR	0x10	/* PWM Period Register		*/
-#define PWMCNR	0x14	/* PWM Counter Register		*/
-
-#define PWMCR_EN		(1 << 0)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 1)	/* Sample Repeats		*/
-#define PWMCR_SWR		(1 << 3)		/* Software Reset		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)/* PRESCALER			*/
-#define PWMCR_CLKSRC(x)		(((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF	(0 << 16)
-#define PWMCR_CLKSRC_IPG	(1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
-#define PWMCR_CLKSRC_CLK32	(3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR		(1 << 20)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 21)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_DBGEN		(1 << 22)		/* Debug Mode			*/
-#define PWMCR_WAITEN		(1 << 23)		/* Wait Mode			*/
-#define PWMCR_DOZEN		(1 << 24)		/* Doze Mode			*/
-#define PWMCR_STOPEN		(1 << 25)		/* Stop Mode			*/
-#define PWMCR_FWM(x)		(((x) & 0x3) << 26)	/* FIFO Water Mark		*/
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
 
 struct pwm_device {
 	struct list_head	node;
@@ -91,32 +52,52 @@ struct pwm_device {
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 {
-	unsigned long long c;
-	unsigned long period_cycles, duty_cycles, prescale;
-
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	prescale = period_cycles / 0x10000 + 1;
-
-	period_cycles /= prescale;
-	c = (unsigned long long)period_cycles * duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-#ifdef PWM_VER_2
-	writel(duty_cycles, pwm->mmio_base + PWMSAR);
-	writel(period_cycles, pwm->mmio_base + PWMPR);
-	writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
-			pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+	if (cpu_is_mx27() || cpu_is_mx3()) {
+		unsigned long long c;
+		unsigned long period_cycles, duty_cycles, prescale;
+		c = clk_get_rate(pwm->clk);
+		c = c * period_ns;
+		do_div(c, 1000000000);
+		period_cycles = c;
+
+		prescale = period_cycles / 0x10000 + 1;
+
+		period_cycles /= prescale;
+		c = (unsigned long long)period_cycles * duty_ns;
+		do_div(c, period_ns);
+		duty_cycles = c;
+
+		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+			pwm->mmio_base + MX3_PWMCR);
+	} else if (cpu_is_mx1() || cpu_is_mx21()) {
+		/* The PWM subsystem allows for exact frequencies. However,
+		 * I cannot connect a scope on my device to the PWM line and
+		 * thus cannot provide the program the PWM controller
+		 * exactly. Instead, I'm relying on the fact that the
+		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+		 * function group already. So I'll just modify the PWM sample
+		 * register to follow the ratio of duty_ns vs. period_ns
+		 * accordingly.
+		 *
+		 * This is good enought for programming the brightness of
+		 * the LCD backlight.
+		 *
+		 * The real implementation would divide PERCLK[0] first by
+		 * both the prescaler (/1 .. /128) and then by CLKSEL
+		 * (/2 .. /16).
+		 */
+		u32 max = readl(pwm->mmio_base + MX1_PWMP);
+		u32 p = max * duty_ns / period_ns;
+		writel(max - p, pwm->mmio_base + MX1_PWMS);
+	} else {
+		BUG();
+	}
 
 	return 0;
 }
@@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357196f..88fb3a57e02 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL		0x00
+#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TPRER		0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1	(1 << 1)
+#define MX1_2_TCTL_IRQEN	(1 << 4)
+#define MX1_2_TCTL_FRR		(1 << 8)
+#define MX1_2_TCMP		0x08
+#define MX1_2_TCN		0x10
+#define MX1_2_TSTAT		0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT		(1 << 1)
+#define MX2_TSTAT_COMP		(1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN		(1 << 3)
+#define MX3_TCTL_CLK_IPG	(1 << 6)
+#define MX3_TCTL_FRR		(1 << 9)
+#define MX3_IR			0x0c
+#define MX3_TSTAT		0x08
+#define MX3_TSTAT_OF1		(1 << 0)
+#define MX3_TCN			0x24
+#define MX3_TCMP		0x10
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source */
+static void __iomem *timer_base;
 
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
 {
-	return __raw_readl(TIMER_BASE + MXC_TCN);
+	unsigned int tmp;
+
+	if (cpu_is_mx3())
+		__raw_writel(0, timer_base + MX3_IR);
+	else {
+		tmp = __raw_readl(timer_base + MXC_TCTL);
+		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+	}
+}
+
+static inline void gpt_irq_enable(void)
+{
+	if (cpu_is_mx3())
+		__raw_writel(1<<0, timer_base + MX3_IR);
+	else {
+		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+			timer_base + MXC_TCTL);
+	}
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	if (cpu_is_mx1())
+		__raw_writel(0, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx2())
+		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx3())
+		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX3_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mxc_get_cycles,
+	.read		= mx1_2_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift 		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clocksource_mxc.read = mx3_get_cycles;
+
 	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 /* clock event */
 
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
 			      struct clock_event_device *unused)
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
-	__raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+	tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
 
-	return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+	__raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+				-ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+	__raw_writel(tcmp, timer_base + MX3_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
 				-ETIME : 0;
 }
 
@@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		__raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
-				TIMER_BASE + MXC_TCMP);
+		if (cpu_is_mx3())
+			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+					timer_base + MX3_TCMP);
+		else
+			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+					timer_base + MX1_2_TCMP);
+
 		/* Clear pending interrupt */
 		gpt_irq_acknowledge();
 	}
@@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+	if (cpu_is_mx3())
+		tstat = __raw_readl(timer_base + MX3_TSTAT);
+	else
+		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
 	gpt_irq_acknowledge();
 
@@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = {
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_mode	= mxc_set_mode,
-	.set_next_event	= mxc_set_next_event,
+	.set_next_event	= mx1_2_set_next_event,
 	.rating		= 200,
 };
 
@@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clockevent_mxc.set_next_event = mx3_set_next_event;
+
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 
 void __init mxc_timer_init(struct clk *timer_clk)
 {
+	uint32_t tctl_val;
+	int irq;
+
 	clk_enable(timer_clk);
 
+	if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+		irq = TIM1_INT;
+#endif
+	} else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT1;
+#endif
+	} else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT;
+#endif
+	} else
+		BUG();
+
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
 	 */
-	__raw_writel(0, TIMER_BASE + MXC_TCTL);
-	__raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
 
-	__raw_writel(TCTL_FRR |	/* free running */
-		     TCTL_VAL |	/* set clocksource and arch specific bits */
-		     TCTL_TEN,	/* start the timer */
-		     TIMER_BASE + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+	if (cpu_is_mx3())
+		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+	else
+		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+	__raw_writel(tctl_val, timer_base + MXC_TCTL);
 
 	/* init and register the timer to the framework */
 	mxc_clocksource_init(timer_clk);
 	mxc_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
-	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+	setup_irq(irq, &mxc_timer_irq);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 9dd68fafb37..efe85d09519 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@ config ARCH_OMAP3
 	select CPU_V7
 	select COMMON_CLKDEV
 
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	select CPU_V7
+	select ARM_GIC
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS
 config OMAP_DEBUG_POWERDOMAIN
 	bool "Emit debug messages from powerdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in powerdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN
 config OMAP_DEBUG_CLOCKDOMAIN
 	bool "Emit debug messages from clockdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in clockdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -110,11 +113,13 @@ config OMAP_MCBSP
 config OMAP_MBOX_FWK
 	tristate "Mailbox framework support"
 	depends on ARCH_OMAP
-	default n
 	help
 	  Say Y here if you want to use OMAP Mailbox framework support for
 	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
@@ -128,13 +133,13 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX and 34XX.
+	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
 endchoice
 
@@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
@@ -171,7 +176,7 @@ endchoice
 
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
-	depends on OMAP_MUX
+	depends on ARCH_OMAP1 && OMAP_MUX
 	default y
 	help
 	  Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100cfb8e..a8327952395 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@ obj-  :=
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc279287..e8c327a45a5 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
+	if (cpu_is_omap44xx())
+		/* OMAP4 clk framework not supported yet */
+		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
@@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret = -EINVAL;
 
+	if (cpu_is_omap44xx())
+	/* OMAP4 clk framework not supported yet */
+		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -240,13 +273,13 @@ void recalculate_root_clocks(void)
 }
 
 /**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
  * @clk: struct clk * to initialize
  *
  * Initialize any struct clk fields needed before normal clk initialization
  * can run.  No return value.
  */
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
 {
 	INIT_LIST_HEAD(&clk->children);
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f3d7c..ebcf006406f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
  * linux/arch/arm/plat-omap/common.c
  *
  * Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/console.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
@@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console);
  * but systems won't necessarily want to spend resources that way.
  */
 
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#ifdef	TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+	return 0;
 }
 
 static struct clocksource clocksource_32k = {
 	.name		= "32k_counter",
 	.rating		= 250,
-	.read		= omap_32k_read,
+	.read		= omap_32k_read_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }
@@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		struct clk *sync_32k_ick;
 
+		if (cpu_is_omap16xx())
+			clocksource_32k.read = omap16xx_32k_read;
+		else if (cpu_is_omap2420())
+			clocksource_32k.read = omap2420_32k_read;
+		else if (cpu_is_omap2430())
+			clocksource_32k.read = omap2430_32k_read;
+		else if (cpu_is_omap34xx())
+			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
+		else
+			return -ENODEV;
+
 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
 		if (sync_32k_ick)
 			clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void)
 }
 arch_initcall(omap_init_clocksource_32k);
 
-#endif	/* TIMER_32K_SYNCHRONIZED */
+#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
 
 /* Global address base setup code */
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
 	omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = {
 
 void __init omap2_set_globals_242x(void)
 {
-	omap2_globals = &omap242x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap242x_globals);
 }
 #endif
 
@@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = {
 
 void __init omap2_set_globals_243x(void)
 {
-	omap2_globals = &omap243x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap243x_globals);
 }
 #endif
 
@@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = {
 
 void __init omap2_set_globals_343x(void)
 {
-	omap2_globals = &omap343x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff4179..a64b692a1bf 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
 		wdt_resources[0].start = 0x49016000; /* WDT2 */
 	else if (cpu_is_omap343x())
 		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else if (cpu_is_omap44xx())
+		wdt_resources[0].start = 0x4a314000;
 	else
 		return;
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c045ad5..def14ec265b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * Support functions for the OMAP internal DMA channels.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
-	u16 w;
-
 	BUG_ON(omap_dma_in_1510_mode());
 
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
-		return;
-	}
+	if (cpu_class_is_omap1()) {
+		u16 w;
 
-	w = dma_read(CCR2(lch));
-	w &= ~0x03;
+		w = dma_read(CCR2(lch));
+		w &= ~0x03;
 
-	switch (mode) {
-	case OMAP_DMA_CONSTANT_FILL:
-		w |= 0x01;
-		break;
-	case OMAP_DMA_TRANSPARENT_COPY:
-		w |= 0x02;
-		break;
-	case OMAP_DMA_COLOR_DIS:
-		break;
-	default:
-		BUG();
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			w |= 0x01;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			w |= 0x02;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(w, CCR2(lch));
+
+		w = dma_read(LCH_CTRL(lch));
+		w &= ~0x0f;
+		/* Default is channel type 2D */
+		if (mode) {
+			dma_write((u16)color, COLOR_L(lch));
+			dma_write((u16)(color >> 16), COLOR_U(lch));
+			w |= 1;		/* Channel type G */
+		}
+		dma_write(w, LCH_CTRL(lch));
 	}
-	dma_write(w, CCR2(lch));
 
-	w = dma_read(LCH_CTRL(lch));
-	w &= ~0x0f;
-	/* Default is channel type 2D */
-	if (mode) {
-		dma_write((u16)color, COLOR_L(lch));
-		dma_write((u16)(color >> 16), COLOR_U(lch));
-		w |= 1;		/* Channel type G */
+	if (cpu_class_is_omap2()) {
+		u32 val;
+
+		val = dma_read(CCR(lch));
+		val &= ~((1 << 17) | (1 << 16));
+
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			val |= 1 << 16;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			val |= 1 << 17;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(val, CCR(lch));
+
+		color &= 0xffffff;
+		dma_write(color, COLOR(lch));
 	}
-	dma_write(w, LCH_CTRL(lch));
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
 
@@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = dma_read(CCR(lch));
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int chain_id, u16 ch_status,
+			   void (*callback) (int lch, u16 ch_status,
 					     void *data),
 			   int *chain_id, int no_of_chans, int chain_mode,
 			   struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 static int omap2_dma_handle_ch(int ch)
 {
@@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void)
 	} else if (cpu_is_omap34xx()) {
 		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap44xx()) {
+		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
@@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void)
 		}
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
-	if (cpu_class_is_omap2())
-		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+	if (cpu_class_is_omap2()) {
+		int irq;
+		if (cpu_is_omap44xx())
+			irq = INT_44XX_SDMA_IRQ0;
+		else
+			irq = INT_24XX_SDMA_IRQ0;
+		setup_irq(irq, &omap24xx_dma_irq);
+	}
 
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb9963129..7f50b6103de 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
  * OMAP2 support by Juha Yrjola
  * API improvements and OMAP2 clock framework support by Timo Teras
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 	struct clk *iclk, *fclk;
 #endif
 	void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap2_dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
 static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 
 #elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 #define omap2_dm_timers			NULL
 #define omap2_dm_source_names		NULL
 #define omap2_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
 static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x)		clk_enable(x)
+#define omap_dm_clk_disable(x)		clk_disable(x)
+#define omap1_dm_timers			NULL
+#define omap2_dm_timers			NULL
+#define omap2_dm_source_names		NULL
+#define omap2_dm_source_clocks		NULL
+#define omap3_dm_timers			NULL
+#define omap3_dm_source_names		NULL
+#define omap3_dm_source_clocks		NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+	{ .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+	{ .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+	{ .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+	{ .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+	{ .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+	{ .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+	{ .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+	{ .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+	{ .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+	{ .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+	"sys_ck",
+	"omap_32k_fck",
+	NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
 #else
 
 #error OMAP architecture not supported!
@@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 #endif
 
 static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
 static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
@@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void)
 		dm_timers = omap1_dm_timers;
 	else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
-		dm_source_names = (char **)omap2_dm_source_names;
-		dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+		dm_source_names = omap2_dm_source_names;
+		dm_source_clocks = omap2_dm_source_clocks;
 	} else if (cpu_is_omap34xx()) {
 		dm_timers = omap3_dm_timers;
-		dm_source_names = (char **)omap3_dm_source_names;
-		dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+		dm_source_names = omap3_dm_source_names;
+		dm_source_clocks = omap3_dm_source_clocks;
+	} else if (cpu_is_omap44xx()) {
+		dm_timers = omap4_dm_timers;
+		dm_source_names = omap4_dm_source_names;
+		dm_source_clocks = omap4_dm_source_clocks;
 	}
 
 	if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
 		timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
 			sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f5b09..7fd89ba8d3b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -146,6 +149,16 @@
 #define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
 #define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
 
+/*
+ * OMAP44XX  specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
+
 #define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
 
 struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+		METHOD_GPIO_24XX },
+};
+
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 	}
 	if (cpu_is_omap24xx())
 		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return &gpio_bank[gpio >> 5];
 	BUG();
 	return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return gpio & 0x1f;
 	return gpio & 0x0f;
 }
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 192)
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
 	return -1;
 }
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 	else
 		goto done;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
 			clk_enable(bank->dbck);
 		else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
 		break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 /*---------------------------------------------------------------------*/
 
 static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
 static struct clk * gpio_ick;
 #endif
 
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
 static struct clk * gpio5_fck;
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
 			sprintf(clk_name, "gpio%d_ick", i + 1);
 			gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		int rev;
+
+		gpio_bank_count = OMAP34XX_NR_GPIOS;
+		gpio_bank = gpio_bank_44xx;
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
+#endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
 
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
 
-		if (cpu_is_omap34xx()) {
+		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 			sprintf(clk_name, "gpio%d_dbck", i + 1);
 			bank->dbck = clk_get(NULL, clk_name);
 			if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
 
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 			irqstat = irq_desc[irq].status;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
-		defined(CONFIG_ARCH_OMAP34XX)
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071d5e3..8b848391f0c 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2007 Nokia Corporation.
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f..f9f65e1ba3f 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
 	void			(*disable)(struct clk *);
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 
 struct clksel_rate {
 	u32			val;
@@ -51,7 +52,7 @@ struct dpll_data {
 	u8			max_divider;
 	u32			max_tolerance;
 	u16			max_multiplier;
-#  if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u8			modes;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
 	void			(*init)(struct clk *);
 	__u8			enable_bit;
 	__s8			usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
 	u32			clksel_mask;
@@ -119,7 +121,7 @@ struct clk_functions {
 extern unsigned int mpurate;
 
 extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);
 extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17..fdeab421b4d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
 #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -62,6 +60,7 @@ struct omap_globals {
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836..8140dbccb7b 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -144,6 +144,10 @@
 #define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -189,8 +193,18 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT	0
+#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
+
 #ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b14425236..fc60c4ebcc2 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
+ * Copyright (C) 2009 Texas Instruments.
+ *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap3430()		is_omap3430()
 #endif
 
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx()		1
+# define cpu_is_omap443x()		1
+# endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
+				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
+#define OMAP443X_CLASS		0x44300034
+
 /*
  * omap_chip bits
  *
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d..ac24050e341 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
 
-#elif	CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
 		movne	\rx, #0xd8000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe9665b18..8c1eae88737 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
 /* Hardware registers for omap2 and omap3 */
 #define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
 #define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
 
 #define OMAP_DMA4_REVISION		0x00
 #define OMAP_DMA4_GCR			0x78
@@ -144,6 +145,7 @@
 #define OMAP_DMA4_CSSA_U(n)		0
 #define OMAP_DMA4_CDSA_L(n)		0
 #define OMAP_DMA4_CDSA_U(n)		0
+#define OMAP1_DMA_COLOR(n)		0
 
 /*----------------------------------------------------------------------------*/
 
@@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
+				  void (*callback) (int lch, u16 ch_status,
 						    void *data),
 				  int *chain_id, int no_of_chans,
 				  int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89671d..56426ed45ef 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
  *
  * Low-level IRQ helper macros for OMAP-based platforms
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
+#include <asm/hardware/gic.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -56,15 +60,21 @@
 		.endm
 
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 
-#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
 #include <mach/omap34xx.h>
-#endif
 
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
 
@@ -77,6 +87,7 @@
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
+#ifndef CONFIG_ARCH_OMAP4
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP2_VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,68 @@
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
 		.endm
+#else
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 00000000000..b64fbee4d56
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96	(1 << 4)
+#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_pwrdwn;
+	int	gpio_reset;
+	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
+	u32	flags;
+	int	(*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+	defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data	NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e8..26c1fbff08a 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3..886248d32b4 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
 #define _HWA742_H
 
 struct hwa742_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
 	unsigned	te_connected:1;
 };
 
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d..3b281472056 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
  * Copied from arch/arm/mach-sa1100/include/mach/io.h
  * Copyright (C) 1997-1999 Russell King
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE
+#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE
+#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_SIZE		SZ_4M
+
+
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_SIZE		SZ_1M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT	0xd8000000
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT	0xe4000000
+#define L4_EMU_44XX_SIZE	SZ_64M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT	0xe0000000
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
 #endif
 
 #define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 00000000000..769b00b4c34
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+	u32 da;
+	u32 pa;
+	u32 pgsz, prsvd, valid;
+	union {
+		u16 ap;
+		struct {
+			u32 endian, elsz, mixed;
+		};
+	};
+};
+
+struct iommu {
+	const char	*name;
+	struct module	*owner;
+	struct clk	*clk;
+	void __iomem	*regbase;
+	struct device	*dev;
+
+	unsigned int	refcount;
+	struct mutex	iommu_lock;	/* global for this whole object */
+
+	/*
+	 * We don't change iopgd for a situation like pgd for a task,
+	 * but share it globally for each iommu.
+	 */
+	u32		*iopgd;
+	spinlock_t	page_table_lock; /* protect iopgd */
+
+	int		nr_tlb_entries;
+
+	struct list_head	mmap;
+	struct mutex		mmap_lock; /* protect mmap */
+
+	int (*isr)(struct iommu *obj);
+
+	void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+	union {
+		struct {
+			u16 cam_l;
+			u16 cam_h;
+		};
+		u32 cam;
+	};
+	union {
+		struct {
+			u16 ram_l;
+			u16 ram_h;
+		};
+		u32 ram;
+	};
+};
+
+struct iotlb_lock {
+	short base;
+	short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+	unsigned long	version;
+
+	int (*enable)(struct iommu *obj);
+	void (*disable)(struct iommu *obj);
+	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+	void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+	struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+	int (*cr_valid)(struct cr_regs *cr);
+	u32 (*cr_to_virt)(struct cr_regs *cr);
+	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+	ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+	u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+	void (*save_ctx)(struct iommu *obj);
+	void (*restore_ctx)(struct iommu *obj);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+	const char *name;
+	const char *clk_name;
+	const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)			\
+	(((bytes) >= SZ_16M) ? SZ_16M :		\
+	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
+	 ((bytes) >= SZ_64K) ? SZ_64K :		\
+	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
+
+#define bytes_to_iopgsz(bytes)				\
+	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
+	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
+	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
+	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)				\
+	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+				int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 00000000000..10ad05f410e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION		0x00
+#define MMU_SYSCONFIG		0x10
+#define MMU_SYSSTATUS		0x14
+#define MMU_IRQSTATUS		0x18
+#define MMU_IRQENABLE		0x1c
+#define MMU_WALKING_ST		0x40
+#define MMU_CNTL		0x44
+#define MMU_FAULT_AD		0x48
+#define MMU_TTB			0x4c
+#define MMU_LOCK		0x50
+#define MMU_LD_TLB		0x54
+#define MMU_CAM			0x58
+#define MMU_RAM			0x5c
+#define MMU_GFLUSH		0x60
+#define MMU_FLUSH_ENTRY		0x64
+#define MMU_READ_CAM		0x68
+#define MMU_READ_RAM		0x6c
+#define MMU_EMU_FAULT_AD	0x70
+
+#define MMU_REG_SIZE		256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT	10
+#define MMU_LOCK_BASE_MASK	(0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x)	\
+	((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT	4
+#define MMU_LOCK_VICT_MASK	(0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x)	\
+	((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT	12
+#define MMU_CAM_VATAG_MASK \
+	((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P		(1 << 3)
+#define MMU_CAM_V		(1 << 2)
+#define MMU_CAM_PGSZ_MASK	3
+#define MMU_CAM_PGSZ_1M		(0 << 0)
+#define MMU_CAM_PGSZ_64K	(1 << 0)
+#define MMU_CAM_PGSZ_4K		(2 << 0)
+#define MMU_CAM_PGSZ_16M	(3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT	12
+#define MMU_RAM_PADDR_MASK \
+	((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT	9
+#define MMU_RAM_ENDIAN_MASK	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE	(0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT	7
+#define MMU_RAM_ELSZ_MASK	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8		(0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16		(1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32		(2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT	6
+#define MMU_RAM_MIXED_MASK	(1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED		MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+	return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+	__raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 00000000000..bdc7ce5d7a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+	struct iommu		*iommu;	/* iommu object which this belongs to */
+	u32			da_start; /* area definition */
+	u32			da_end;
+	u32			flags; /* IOVMF_: see below */
+	struct list_head	list; /* linked in ascending order */
+	const struct sg_table	*sgt; /* keep 'page' <-> 'da' mapping */
+	void			*va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT		16
+#define IOVMF_HW_SIZE		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK		(IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK		(~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK		(~((1 << 10) - 1))
+#define IOVMF_RAM_MASK		(~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK		(3 << 0)
+#define IOVMF_PGSZ_1M		MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K		MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K		MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M		MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK	(1 << 9)
+#define IOVMF_ENDIAN_BIG	MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE	MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK		(3 << 7)
+#define IOVMF_ELSZ_8		MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16		MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32		MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE		MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK	(1 << 6)
+#define IOVMF_MIXED		MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC		(2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK	(3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT		(1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR		(2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON		(2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK		(3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+			const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+			u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f36..fb7cb772399 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,94 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
+
+#define IRQ_GIC_START		32
+#define INT_44XX_LOCALTIMER_IRQ	29
+#define INT_44XX_LOCALWDT_IRQ	30
+
+#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+
+
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
@@ -467,6 +558,7 @@
 
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923aaf61..45ea3ae3c99 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
 #define GROUP_3		(3 << 16)
 #define GROUP_MASK	GROUP_3
 
+#define KEY_PERSISTENT		0x00800000
+#define KEYNUM_MASK		0x00EFFFFF
 #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d927..9ad41dc484c 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4932f..696edfc145a 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab640151d3e..f8d186a7371 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
@@ -83,15 +79,6 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE			OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
 #define OMAP34XX_DSP_BASE	0x58000000
 #define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
 #define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 00000000000..15dec7f1c7c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE			0x4a000000
+#define L4_WK_44XX_BASE			0x4a300000
+#define L4_PER_44XX_BASE		0x48000000
+#define L4_EMU_44XX_BASE		0x54000000
+#define L3_44XX_BASE			0x44000000
+#define OMAP4430_32KSYNCT_BASE		0x4a304000
+#define OMAP4430_CM_BASE		0x4a004000
+#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP44XX_GPMC_BASE		0x50000000
+#define OMAP443X_SCM_BASE		0x4a002000
+#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE		0x48200000
+#define OMAP44XX_IVA_INTC_BASE		0x40000000
+#define IRQ_SIR_IRQ			0x0040
+#define OMAP44XX_GIC_DIST_BASE		0x48241000
+#define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE		0x48240000
+#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
+#define OMAP44XX_WKUPGEN_BASE		0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d302c26..72f433d7d82 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#define ONENAND_SYNC_READ	(1 << 0)
+#define ONENAND_SYNC_READWRITE	(1 << 1)
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
 	int			nr_parts;
 	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
+	u8			flags;
 };
 
-int omap2_onenand_rephase(void);
-
 #define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data	NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be4..13abd02d152 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
 /*
- *  arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
+#define OMAP_MAX_NR_PORTS	3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x48020000
+#define OMAP_UART4_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	4
 #endif
 
-#define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
@@ -40,4 +52,13 @@
 			__ret;						\
 			})
 
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h
new file mode 100644
index 00000000000..dcaa8fde706
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/smp.h
@@ -0,0 +1,51 @@
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d622dcf..dca7c16ae90 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
 				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2);
+				     u32 sdrc_actim_ctrlb, u32 m2,
+				     u32 unlock_dll);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
 extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
 					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2);
+					  u32 sdrc_actim_ctrlb, u32 m2,
+					  u32 unlock_dll);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0ceed500..f337e1761e2 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
-#ifdef CONFIG_USB_MUSB_SOC
 extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd9619..b97dfafeebd 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad..9b42d72d96c 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -7,6 +18,7 @@
 #include <mach/omap16xx.h>
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
 	}
 #endif
-
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+		if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+	}
+#endif
 	return __arm_ioremap(p, size, type);
 }
 EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 00000000000..4cf449fa2cb
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu)
+		return -EBUSY;
+
+	arch_iommu = ops;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu != ops)
+		pr_err("%s: not your arch\n", __func__);
+
+	arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+	arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+	arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+	return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+	int err;
+
+	if (!obj)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	err = arch_iommu->enable(obj);
+
+	clk_disable(obj->clk);
+	return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+	if (!obj)
+		return;
+
+	clk_enable(obj->clk);
+
+	arch_iommu->disable(obj);
+
+	clk_disable(obj->clk);
+}
+
+/*
+ *	TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	BUG_ON(!cr || !e);
+
+	arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+	if (!cr)
+		return -EINVAL;
+
+	return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+					     struct iotlb_entry *e)
+{
+	if (!e)
+		return NULL;
+
+	return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+	return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+	return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+	return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	val = iommu_read_reg(obj, MMU_LOCK);
+
+	l->base = MMU_LOCK_BASE(val);
+	l->vict = MMU_LOCK_VICT(val);
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+	val = (l->base << MMU_LOCK_BASE_SHIFT);
+	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+	iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_load_cr(obj, cr);
+
+	iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+	iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj:	target iommu
+ * @cr:		contents of cam and ram register
+ * @buf:	output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+				    char *buf)
+{
+	BUG_ON(!cr || !buf);
+
+	return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int i;
+	int err = 0;
+	struct iotlb_lock l;
+	struct cr_regs *cr;
+
+	if (!obj || !obj->nr_tlb_entries || !e)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			break;
+	}
+
+	if (i == obj->nr_tlb_entries) {
+		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+
+	cr = iotlb_alloc_cr(obj, e);
+	if (IS_ERR(cr)) {
+		clk_disable(obj->clk);
+		return PTR_ERR(cr);
+	}
+
+	iotlb_load_cr(obj, cr);
+	kfree(cr);
+
+	/* increment victim for next tlb load */
+	if (++l.vict == obj->nr_tlb_entries)
+		l.vict = 0;
+	iotlb_lock_set(obj, &l);
+out:
+	clk_disable(obj->clk);
+	return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+	struct iotlb_lock l;
+	int i;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs cr;
+		u32 start;
+		size_t bytes;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &cr);
+		if (!iotlb_cr_valid(&cr))
+			continue;
+
+		start = iotlb_cr_to_virt(&cr);
+		bytes = iopgsz_to_bytes(cr.cam & 3);
+
+		if ((start <= da) && (da < start + bytes)) {
+			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+				__func__, start, da, bytes);
+
+			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+		}
+	}
+	clk_disable(obj->clk);
+
+	if (i == obj->nr_tlb_entries)
+		dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj:	target iommu
+ * @start:	iommu device virtual address(start)
+ * @end:	iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+	u32 da = start;
+
+	while (da < end) {
+		flush_iotlb_page(obj, da);
+		/* FIXME: Optimize for multiple page size */
+		da += IOPTE_SIZE;
+	}
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj:	target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+	struct iotlb_lock l;
+
+	clk_enable(obj->clk);
+
+	l.base = 0;
+	l.vict = 0;
+	iotlb_lock_set(obj, &l);
+
+	iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+	clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	ssize_t bytes;
+
+	if (!obj || !buf)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	bytes = arch_iommu->dump_ctx(obj, buf);
+
+	clk_disable(obj->clk);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+	int i;
+	struct iotlb_lock saved, l;
+	struct cr_regs *p = crs;
+
+	clk_enable(obj->clk);
+
+	iotlb_lock_get(obj, &saved);
+	memcpy(&l, &saved, sizeof(saved));
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			continue;
+
+		*p++ = tmp;
+	}
+	iotlb_lock_set(obj, &saved);
+	clk_disable(obj->clk);
+
+	return  p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj:	target iommu
+ * @buf:	output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+	int i, n;
+	struct cr_regs *cr;
+	char *p = buf;
+
+	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return 0;
+
+	n = __dump_tlb_entries(obj, cr);
+	for (i = 0; i < n; i++)
+		p += iotlb_dump_cr(obj, cr + i, p);
+	kfree(cr);
+
+	return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+	return driver_for_each_device(&omap_iommu_driver.driver,
+				      NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ *	H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pgd"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pte"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+	/* Note: freed iopte's must be clean ready for re-use */
+	kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+	u32 *iopte;
+
+	/* a table has already existed */
+	if (*iopgd)
+		goto pte_ready;
+
+	/*
+	 * do the allocation outside the page table lock
+	 */
+	spin_unlock(&obj->page_table_lock);
+	iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+	spin_lock(&obj->page_table_lock);
+
+	if (!*iopgd) {
+		if (!iopte)
+			return ERR_PTR(-ENOMEM);
+
+		*iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+		flush_iopgd_range(iopgd, iopgd);
+
+		dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+	} else {
+		/* We raced, free the reduniovant table */
+		iopte_free(iopte);
+	}
+
+pte_ready:
+	iopte = iopte_offset(iopgd, da);
+
+	dev_vdbg(obj->dev,
+		 "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		 __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+
+	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+	flush_iopgd_range(iopgd, iopgd);
+	return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	int i;
+
+	for (i = 0; i < 16; i++)
+		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+	flush_iopgd_range(iopgd, iopgd + 15);
+	return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	*iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+	flush_iopte_range(iopte, iopte);
+
+	dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+		 __func__, da, pa, iopte, *iopte);
+
+	return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+	int i;
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	for (i = 0; i < 16; i++)
+		*(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+	flush_iopte_range(iopte, iopte + 15);
+	return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+	int (*fn)(struct iommu *, u32, u32, u32);
+	u32 prot;
+	int err;
+
+	if (!obj || !e)
+		return -EINVAL;
+
+	switch (e->pgsz) {
+	case MMU_CAM_PGSZ_16M:
+		fn = iopgd_alloc_super;
+		break;
+	case MMU_CAM_PGSZ_1M:
+		fn = iopgd_alloc_section;
+		break;
+	case MMU_CAM_PGSZ_64K:
+		fn = iopte_alloc_large;
+		break;
+	case MMU_CAM_PGSZ_4K:
+		fn = iopte_alloc_page;
+		break;
+	default:
+		fn = NULL;
+		BUG();
+		break;
+	}
+
+	prot = get_iopte_attr(e);
+
+	spin_lock(&obj->page_table_lock);
+	err = fn(obj, e->da, e->pa, prot);
+	spin_unlock(&obj->page_table_lock);
+
+	return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int err;
+
+	flush_iotlb_page(obj, e->da);
+	err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+	if (!err)
+		load_iotlb_entry(obj, e);
+#endif
+	return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ * @ppgd:	iommu pgd entry pointer to be returned
+ * @ppte:	iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+	u32 *iopgd, *iopte = NULL;
+
+	iopgd = iopgd_offset(obj, da);
+	if (!*iopgd)
+		goto out;
+
+	if (*iopgd & IOPGD_TABLE)
+		iopte = iopte_offset(iopgd, da);
+out:
+	*ppgd = iopgd;
+	*ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+	u32 *iopgd = iopgd_offset(obj, da);
+	int nent = 1;
+
+	if (!*iopgd)
+		return 0;
+
+	if (*iopgd & IOPGD_TABLE) {
+		int i;
+		u32 *iopte = iopte_offset(iopgd, da);
+
+		bytes = IOPTE_SIZE;
+		if (*iopte & IOPTE_LARGE) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+		}
+		bytes *= nent;
+		memset(iopte, 0, nent * sizeof(*iopte));
+		flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+		/*
+		 * do table walk to check if this table is necessary or not
+		 */
+		iopte = iopte_offset(iopgd, 0);
+		for (i = 0; i < PTRS_PER_IOPTE; i++)
+			if (iopte[i])
+				goto out;
+
+		iopte_free(iopte);
+		nent = 1; /* for the next L1 entry */
+	} else {
+		bytes = IOPGD_SIZE;
+		if (*iopgd & IOPGD_SUPER) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+		}
+		bytes *= nent;
+	}
+	memset(iopgd, 0, nent * sizeof(*iopgd));
+	flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+	return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+
+	spin_lock(&obj->page_table_lock);
+
+	bytes = iopgtable_clear_entry_core(obj, da);
+	flush_iotlb_page(obj, da);
+
+	spin_unlock(&obj->page_table_lock);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+	int i;
+
+	spin_lock(&obj->page_table_lock);
+
+	for (i = 0; i < PTRS_PER_IOPGD; i++) {
+		u32 da;
+		u32 *iopgd;
+
+		da = i << IOPGD_SHIFT;
+		iopgd = iopgd_offset(obj, da);
+
+		if (!*iopgd)
+			continue;
+
+		if (*iopgd & IOPGD_TABLE)
+			iopte_free(iopte_offset(iopgd, 0));
+
+		*iopgd = 0;
+		flush_iopgd_range(iopgd, iopgd);
+	}
+
+	flush_iotlb_all(obj);
+
+	spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ *	Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+	u32 stat, da;
+	u32 *iopgd, *iopte;
+	int err = -EIO;
+	struct iommu *obj = data;
+
+	if (!obj->refcount)
+		return IRQ_NONE;
+
+	/* Dynamic loading TLB or PTE */
+	if (obj->isr)
+		err = obj->isr(obj);
+
+	if (!err)
+		return IRQ_HANDLED;
+
+	clk_enable(obj->clk);
+	stat = iommu_report_fault(obj, &da);
+	clk_disable(obj->clk);
+	if (!stat)
+		return IRQ_HANDLED;
+
+	iopgd = iopgd_offset(obj, da);
+
+	if (!(*iopgd & IOPGD_TABLE)) {
+		dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+			da, iopgd, *iopgd);
+		return IRQ_NONE;
+	}
+
+	iopte = iopte_offset(iopgd, da);
+
+	dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		__func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+	struct iommu *obj = to_iommu(dev);
+	const char *name = data;
+
+	pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+	return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name:	target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+	int err = -ENOMEM;
+	struct device *dev;
+	struct iommu *obj;
+
+	dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+				 device_match_by_alias);
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	obj = to_iommu(dev);
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (obj->refcount++ == 0) {
+		err = iommu_enable(obj);
+		if (err)
+			goto err_enable;
+		flush_iotlb_all(obj);
+	}
+
+	if (!try_module_get(obj->owner))
+		goto err_module;
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+	return obj;
+
+err_module:
+	if (obj->refcount == 1)
+		iommu_disable(obj);
+err_enable:
+	obj->refcount--;
+	mutex_unlock(&obj->iommu_lock);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj:	target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+	if (!obj && IS_ERR(obj))
+		return;
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (--obj->refcount == 0)
+		iommu_disable(obj);
+
+	module_put(obj->owner);
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ *	OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	void *p;
+	int irq;
+	struct iommu *obj;
+	struct resource *res;
+	struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdev->num_resources != 2)
+		return -EINVAL;
+
+	obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(obj->clk))
+		goto err_clk;
+
+	obj->nr_tlb_entries = pdata->nr_tlb_entries;
+	obj->name = pdata->name;
+	obj->dev = &pdev->dev;
+	obj->ctx = (void *)obj + sizeof(*obj);
+
+	mutex_init(&obj->iommu_lock);
+	mutex_init(&obj->mmap_lock);
+	spin_lock_init(&obj->page_table_lock);
+	INIT_LIST_HEAD(&obj->mmap);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto err_mem;
+	}
+	obj->regbase = ioremap(res->start, resource_size(res));
+	if (!obj->regbase) {
+		err = -ENOMEM;
+		goto err_mem;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+				 dev_name(&pdev->dev));
+	if (!res) {
+		err = -EIO;
+		goto err_mem;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = -ENODEV;
+		goto err_irq;
+	}
+	err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+			  dev_name(&pdev->dev), obj);
+	if (err < 0)
+		goto err_irq;
+	platform_set_drvdata(pdev, obj);
+
+	p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+	if (!p) {
+		err = -ENOMEM;
+		goto err_pgd;
+	}
+	memset(p, 0, IOPGD_TABLE_SIZE);
+	clean_dcache_area(p, IOPGD_TABLE_SIZE);
+	obj->iopgd = p;
+
+	BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+	dev_info(&pdev->dev, "%s registered\n", obj->name);
+	return 0;
+
+err_pgd:
+	free_irq(irq, obj);
+err_irq:
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+err_mem:
+	clk_put(obj->clk);
+err_clk:
+	kfree(obj);
+	return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+	int irq;
+	struct resource *res;
+	struct iommu *obj = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	iopgtable_clear_entry_all(obj);
+	free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, obj);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+
+	clk_put(obj->clk);
+	dev_info(&pdev->dev, "%s removed\n", obj->name);
+	kfree(obj);
+	return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+	.probe	= omap_iommu_probe,
+	.remove	= __devexit_p(omap_iommu_remove),
+	.driver	= {
+		.name	= "omap-iommu",
+	},
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+	clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+	struct kmem_cache *p;
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	size_t align = 1 << 10; /* L2 pagetable alignement */
+
+	p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+			      iopte_cachep_ctor);
+	if (!p)
+		return -ENOMEM;
+	iopte_cachep = p;
+
+	return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+	kmem_cache_destroy(iopte_cachep);
+
+	platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 00000000000..37dac434c7a
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT		20
+#define IOPGD_SIZE		(1 << IOPGD_SHIFT)
+#define IOPGD_MASK		(~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK		IOPGD_MASK
+#define PTRS_PER_IOPGD		(1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE		(IOPGD_SIZE << 4)
+#define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT		12
+#define IOPTE_SIZE		(1 << IOPTE_SHIFT)
+#define IOPTE_MASK		(~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK		IOPTE_MASK
+#define PTRS_PER_IOPTE		(1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE		(IOPTE_SIZE << 4)
+#define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE		(1 << 0)
+#define IOPGD_SECTION		(2 << 0)
+#define IOPGD_SUPER		(1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL		(2 << 0)
+#define IOPTE_LARGE		(1 << 0)
+
+#define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+				   u32 flags)
+{
+	memset(e, 0, sizeof(*e));
+
+	e->da		= da;
+	e->pa		= pa;
+	e->valid	= 1;
+	/* FIXME: add OMAP1 support */
+	e->pgsz		= flags & MMU_CAM_PGSZ_MASK;
+	e->endian	= flags & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= flags & MMU_RAM_ELSZ_MASK;
+	e->mixed	= flags & MMU_RAM_MIXED_MASK;
+
+	return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev)							\
+	(struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 00000000000..2fce2c151a9
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ *    |iova/			  mapping		iommu_		page
+ *    | da	pa	va	(d)-(p)-(v)		function	type
+ *  ---------------------------------------------------------------------------
+ *  1 | c	c	c	 1 - 1 - 1	  _kmap() / _kunmap()	s
+ *  2 | c	c,a	c	 1 - 1 - 1	_kmalloc()/ _kfree()	s
+ *  3 | c	d	c	 1 - n - 1	  _vmap() / _vunmap()	s
+ *  4 | c	d,a	c	 1 - n - 1	_vmalloc()/ _vfree()	n*
+ *
+ *
+ *	'iova':	device iommu virtual address
+ *	'da':	alias of 'iova'
+ *	'pa':	physical address
+ *	'va':	mpu virtual address
+ *
+ *	'c':	contiguous memory area
+ *	'd':	dicontiguous memory area
+ *	'a':	anonymous memory allocation
+ *	'()':	optional feature
+ *
+ *	'n':	a normal page(4KB) size is used.
+ *	's':	multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ *	'*':	not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+	unsigned int i, total = 0;
+	struct scatterlist *sg;
+
+	if (!sgt)
+		return 0;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = sg_dma_len(sg);
+
+		if (!iopgsz_ok(bytes)) {
+			pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+			       __func__, i, bytes);
+			return 0;
+		}
+
+		total += bytes;
+	}
+
+	return total;
+}
+#define sgtable_ok(x)	(!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+	int i;
+	unsigned int nr_entries;
+	const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+		pr_err("%s: wrong size %08x\n", __func__, bytes);
+		return 0;
+	}
+
+	nr_entries = 0;
+	for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+		if (bytes >= pagesize[i]) {
+			nr_entries += (bytes / pagesize[i]);
+			bytes %= pagesize[i];
+		}
+	}
+	BUG_ON(bytes);
+
+	return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+	unsigned int nr_entries;
+	int err;
+	struct sg_table *sgt;
+
+	if (!bytes)
+		return ERR_PTR(-EINVAL);
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE))
+		return ERR_PTR(-EINVAL);
+
+	/* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+	if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+		nr_entries = sgtable_nents(bytes);
+		if (!nr_entries)
+			return ERR_PTR(-EINVAL);
+	} else
+		nr_entries =  bytes / PAGE_SIZE;
+
+	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+	if (!sgt)
+		return ERR_PTR(-ENOMEM);
+
+	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+	if (err)
+		return ERR_PTR(err);
+
+	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+	return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+	if (!sgt)
+		return;
+
+	sg_free_table(sgt);
+	kfree(sgt);
+
+	pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+	u32 va;
+	size_t total;
+	unsigned int i;
+	struct scatterlist *sg;
+	struct vm_struct *new;
+	const struct mem_type *mtype;
+
+	mtype = get_mem_type(MT_DEVICE);
+	if (!mtype)
+		return ERR_PTR(-EINVAL);
+
+	total = sgtable_len(sgt);
+	if (!total)
+		return ERR_PTR(-EINVAL);
+
+	new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+	va = (u32)new->addr;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+		u32 pa;
+		int err;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		BUG_ON(bytes != PAGE_SIZE);
+
+		err = ioremap_page(va,  pa, mtype);
+		if (err)
+			goto err_out;
+
+		va += bytes;
+	}
+
+	flush_cache_vmap(new->addr, total);
+	return new->addr;
+
+err_out:
+	WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+	vunmap(new->addr);
+	return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+	vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+	struct iovm_struct *tmp;
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+			size_t len;
+
+			len = tmp->da_end - tmp->da_start;
+
+			dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+				__func__, tmp->da_start, da, tmp->da_end, len,
+				tmp->flags);
+
+			return tmp;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * find_iovm_area  -  find iovma which includes @da
+ * @da:		iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+	area = __find_iovm_area(obj, da);
+	mutex_unlock(&obj->mmap_lock);
+
+	return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+					   size_t bytes, u32 flags)
+{
+	struct iovm_struct *new, *tmp;
+	u32 start, prev_end, alignement;
+
+	if (!obj || !bytes)
+		return ERR_PTR(-EINVAL);
+
+	start = da;
+	alignement = PAGE_SIZE;
+
+	if (flags & IOVMF_DA_ANON) {
+		/*
+		 * Reserve the first page for NULL
+		 */
+		start = PAGE_SIZE;
+		if (flags & IOVMF_LINEAR)
+			alignement = iopgsz_max(bytes);
+		start = roundup(start, alignement);
+	}
+
+	tmp = NULL;
+	if (list_empty(&obj->mmap))
+		goto found;
+
+	prev_end = 0;
+	list_for_each_entry(tmp, &obj->mmap, list) {
+
+		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+			goto found;
+
+		if (flags & IOVMF_DA_ANON)
+			start = roundup(tmp->da_end, alignement);
+
+		prev_end = tmp->da_end;
+	}
+
+	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+		goto found;
+
+	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+		__func__, da, bytes, flags);
+
+	return ERR_PTR(-EINVAL);
+
+found:
+	new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+
+	new->iommu = obj;
+	new->da_start = start;
+	new->da_end = start + bytes;
+	new->flags = flags;
+
+	/*
+	 * keep ascending order of iovmas
+	 */
+	if (tmp)
+		list_add_tail(&new->list, &tmp->list);
+	else
+		list_add(&new->list, &obj->mmap);
+
+	dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+		__func__, new->da_start, start, new->da_end, bytes, flags);
+
+	return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	size_t bytes;
+
+	BUG_ON(!obj || !area);
+
+	bytes = area->da_end - area->da_start;
+
+	dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+		__func__, area->da_start, area->da_end, bytes, area->flags);
+
+	list_del(&area->list);
+	kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ * @va:		mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+	void *va = NULL;
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+	va = area->va;
+	mutex_unlock(&obj->mmap_lock);
+out:
+	return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va = _va;
+	void *va_end;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		struct page *pg;
+		const size_t bytes = PAGE_SIZE;
+
+		/*
+		 * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+		 */
+		pg = vmalloc_to_page(va);
+		BUG_ON(!pg);
+		sg_set_page(sg, pg, bytes, 0);
+
+		va += bytes;
+	}
+
+	va_end = _va + PAGE_SIZE * i;
+	flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility.
+	 */
+	BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va;
+
+	va = phys_to_virt(pa);
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = iopgsz_max(len);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		sg_set_buf(sg, phys_to_virt(pa), bytes);
+		/*
+		 * 'pa' is cotinuous(linear).
+		 */
+		pa += bytes;
+		len -= bytes;
+	}
+	BUG_ON(len);
+
+	clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility
+	 */
+	BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+			 const struct sg_table *sgt, u32 flags)
+{
+	int err;
+	unsigned int i, j;
+	struct scatterlist *sg;
+	u32 da = new->da_start;
+
+	if (!obj || !new || !sgt)
+		return -EINVAL;
+
+	BUG_ON(!sgtable_ok(sgt));
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		u32 pa;
+		int pgsz;
+		size_t bytes;
+		struct iotlb_entry e;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		flags &= ~IOVMF_PGSZ_MASK;
+		pgsz = bytes_to_iopgsz(bytes);
+		if (pgsz < 0)
+			goto err_out;
+		flags |= pgsz;
+
+		pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+			 i, da, pa, bytes);
+
+		iotlb_init_entry(&e, da, pa, flags);
+		err = iopgtable_store_entry(obj, &e);
+		if (err)
+			goto err_out;
+
+		da += bytes;
+	}
+	return 0;
+
+err_out:
+	da = new->da_start;
+
+	for_each_sg(sgt->sgl, sg, i, j) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, da);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		da += bytes;
+	}
+	return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	u32 start;
+	size_t total = area->da_end - area->da_start;
+
+	BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+	start = area->da_start;
+	while (total > 0) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, start);
+		if (bytes == 0)
+			bytes = PAGE_SIZE;
+		else
+			dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+				__func__, start, bytes, area->flags);
+
+		BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+		total -= bytes;
+		start += bytes;
+	}
+	BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+				      void (*fn)(const void *), u32 flags)
+{
+	struct sg_table *sgt = NULL;
+	struct iovm_struct *area;
+
+	if (!IS_ALIGNED(da, PAGE_SIZE)) {
+		dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+		return NULL;
+	}
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+
+	if ((area->flags & flags) != flags) {
+		dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+			area->flags);
+		goto out;
+	}
+	sgt = (struct sg_table *)area->sgt;
+
+	unmap_iovm_area(obj, area);
+
+	fn(area->va);
+
+	dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+		area->da_start, da, area->da_end,
+		area->da_end - area->da_start, area->flags);
+
+	free_iovm_area(obj, area);
+out:
+	mutex_unlock(&obj->mmap_lock);
+
+	return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+	      const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	int err = -ENOMEM;
+	struct iovm_struct *new;
+
+	mutex_lock(&obj->mmap_lock);
+
+	new = alloc_iovm_area(obj, da, bytes, flags);
+	if (IS_ERR(new)) {
+		err = PTR_ERR(new);
+		goto err_alloc_iovma;
+	}
+	new->va = va;
+	new->sgt = sgt;
+
+	if (map_iovm_area(obj, new, sgt, new->flags))
+		goto err_map;
+
+	mutex_unlock(&obj->mmap_lock);
+
+	dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+		__func__, new->da_start, bytes, new->flags, va);
+
+	return new->da_start;
+
+err_map:
+	free_iovm_area(obj, new);
+err_alloc_iovma:
+	mutex_unlock(&obj->mmap_lock);
+	return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+		 const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @sgt:	address of scatter gather table
+ * @flags:	iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+		 u32 flags)
+{
+	size_t bytes;
+	void *va;
+
+	if (!obj || !obj->dev || !sgt)
+		return -EINVAL;
+
+	bytes = sgtable_len(sgt);
+	if (!bytes)
+		return -EINVAL;
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmap_sg(sgt);
+	if (IS_ERR(va))
+		return PTR_ERR(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		vunmap_sg(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap  -  release virtual mapping obtained by 'iommu_vmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	/*
+	 * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+	 * Just returns 'sgt' to the caller to free
+	 */
+	sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	allocation size
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	struct sg_table *sgt;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmalloc(bytes);
+	if (!va)
+		return -ENOMEM;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt)) {
+		da = PTR_ERR(sgt);
+		goto err_sgt_alloc;
+	}
+	sgtable_fill_vmalloc(sgt, va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		goto err_iommu_vmap;
+
+	return da;
+
+err_iommu_vmap:
+	sgtable_drain_vmalloc(sgt);
+	sgtable_free(sgt);
+err_sgt_alloc:
+	vfree(va);
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree  -  release memory allocated by 'iommu_vmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+			  size_t bytes, u32 flags)
+{
+	struct sg_table *sgt;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt))
+		return PTR_ERR(sgt);
+
+	sgtable_fill_kmalloc(sgt, pa, bytes);
+
+	da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da)) {
+		sgtable_drain_kmalloc(sgt);
+		sgtable_free(sgt);
+	}
+
+	return da;
+}
+
+/**
+ * iommu_kmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @pa:		contiguous physical memory
+ * @flags:	iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+		 u32 flags)
+{
+	void *va;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = ioremap(pa, bytes);
+	if (!va)
+		return -ENOMEM;
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		iounmap(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap  -  release virtual mapping obtained by 'iommu_kmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	typedef void (*func_t)(const void *);
+
+	sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+			    IOVMF_LINEAR | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	bytes for allocation
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	u32 pa;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+	if (!va)
+		return -ENOMEM;
+	pa = virt_to_phys(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		kfree(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree  -  release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	struct kmem_cache *p;
+
+	p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+			      flags, NULL);
+	if (!p)
+		return -ENOMEM;
+	iovm_area_cachep = p;
+
+	return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+	kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a824b8c..efa0e0111f3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
+	u16 irqst_spcr2;
 
-	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+	irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
 
-	complete(&mcbsp_tx->tx_irq_completion);
+	if (irqst_spcr2 & XSYNC_ERR) {
+		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+			irqst_spcr2);
+		/* Writing zero to XSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+			irqst_spcr2 & ~(XSYNC_ERR));
+	} else {
+		complete(&mcbsp_tx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_rx = dev_id;
+	u16 irqst_spcr1;
 
-	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+	irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
 
-	complete(&mcbsp_rx->rx_irq_completion);
+	if (irqst_spcr1 & RSYNC_ERR) {
+		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+			irqst_spcr1);
+		/* Writing zero to RSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+			irqst_spcr1 & ~(RSYNC_ERR));
+	} else {
+		complete(&mcbsp_rx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca..8d329fb2074 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
+	if (cpu_is_omap44xx())
+		return 0;
+
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
 		return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d643d..a5b9bcd6b10 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -38,12 +41,14 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PUB_VA	(VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xd7000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
+#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
 {
 	int type = 0;
 
+	if (cpu_is_omap44xx())
+		/* Not yet supported */
+		return 0;
+
 	if (cpu_is_omap242x())
 		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
 				omap_sram_base = OMAP3_SRAM_VA;
 				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_VA;
+				omap_sram_start = OMAP4_SRAM_PA;
+				omap_sram_size = 0x8000; /* 32K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@ void __init omap_map_sram(void)
 		base = OMAP3_SRAM_PA;
 		base = ROUND_DOWN(base, PAGE_SIZE);
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+		/*
+		 * SRAM must be marked as non-cached on OMAP3 since the
+		 * CORE DPLL M2 divider change code (in SRAM) runs with the
+		 * SDRAM controller disabled, and if it is marked cached,
+		 * the ARM may attempt to write cache lines back to SDRAM
+		 * which will cause the system to hang.
+		 */
+		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
+	if (cpu_is_omap44xx()) {
+		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+		base = OMAP4_SRAM_PA;
+		base = ROUND_DOWN(base, PAGE_SIZE);
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	}
 	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-static void omap_sram_error(void)
-{
-	panic("Uninitialized SRAM function\n");
-}
-
 #ifdef CONFIG_ARCH_OMAP1
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
-	if (!_omap_sram_reprogram_clock)
-		omap_sram_error();
-
+	BUG_ON(!_omap_sram_reprogram_clock);
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
@@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 		   u32 base_cs, u32 force_unlock)
 {
-	if (!_omap2_sram_ddr_init)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_ddr_init);
 	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
 			     base_cs, force_unlock);
 }
@@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
 
 void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
 {
-	if (!_omap2_sram_reprogram_sdrc)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_reprogram_sdrc);
 	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
 }
 
@@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 {
-	if (!_omap2_set_prcm)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_set_prcm);
 	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
 }
 #endif
@@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
 					      u32 sdrc_actim_ctrla,
 					      u32 sdrc_actim_ctrlb,
-					      u32 m2);
+					      u32 m2, u32 unlock_dll);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2)
+			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
 {
-	if (!_omap3_sram_configure_core_dpll)
-		omap_sram_error();
-
+	BUG_ON(!_omap3_sram_configure_core_dpll);
 	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
 					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2);
+					       sdrc_actim_ctrlb, m2,
+					       unlock_dll);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
+	else if (cpu_is_omap44xx())
+		omap34xx_sram_init(); /* FIXME: */
 
 	return 0;
 }
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 32eb9e33beb..e814803d474 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -15,10 +15,9 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 static DEFINE_SPINLOCK(gpio_lock);
-static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
 static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
 
@@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high)
 	writel(u, GPIO_OUT(pin));
 }
 
-
-/*
- * GENERIC_GPIO primitives.
- */
-int gpio_direction_input(unsigned pin)
+static inline void __set_blinking(unsigned pin, int blink)
 {
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
+	u32 u;
 
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 1);
+	u = readl(GPIO_BLINK_EN(pin));
+	if (blink)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+}
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
+static inline int orion_gpio_is_valid(unsigned pin, int mode)
+{
+	if (pin < GPIO_MAX) {
+		if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
+			goto err_out;
+		if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
+			goto err_out;
+		return true;
+	}
 
-	return 0;
+err_out:
+	pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	return false;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned pin, int value)
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
 	unsigned long flags;
-	u32 u;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
 		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
-
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
-
-	/*
-	 * Configure GPIO output value.
-	 */
-	__set_level(pin, value);
-
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 0);
+	/* Configure GPIO direction. */
+	__set_direction(pin, 1);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-int gpio_get_value(unsigned pin)
+static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
 {
 	int val;
 
@@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin)
 
 	return (val >> (pin & 31)) & 1;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-void gpio_set_value(unsigned pin, int value)
+static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	u32 u;
+
+	if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return -EINVAL;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Disable blinking. */
+	__set_blinking(pin, 0);
 
-	/*
-	 * Configure GPIO output value.
-	 */
+	/* Configure GPIO output value. */
 	__set_level(pin, value);
 
+	/* Configure GPIO direction. */
+	__set_direction(pin, 0);
+
 	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_request(unsigned pin, const char *label)
+static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	int ret;
-
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
-	if (gpio_label[pin] == NULL) {
-		gpio_label[pin] = label ? label : "?";
-		ret = 0;
-	} else {
-		pr_debug("%s: GPIO %d already used as %s\n",
-			 __func__, pin, gpio_label[pin]);
-		ret = -EBUSY;
-	}
-	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	return ret;
+	/* Configure GPIO output value. */
+	__set_level(pin, value);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned pin)
+static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return;
-	}
-
-	if (gpio_label[pin] == NULL)
-		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
-	else
-		gpio_label[pin] = NULL;
+	if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
+	    orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return 0;
+	return -EINVAL;
 }
-EXPORT_SYMBOL(gpio_free);
 
+static struct gpio_chip orion_gpiochip = {
+	.label			= "orion_gpio",
+	.direction_input	= orion_gpio_direction_input,
+	.get			= orion_gpio_get_value,
+	.direction_output	= orion_gpio_direction_output,
+	.set			= orion_gpio_set_value,
+	.request		= orion_gpio_request,
+	.base			= 0,
+	.ngpio			= GPIO_MAX,
+	.can_sleep		= 0,
+};
+
+void __init orion_gpio_init(void)
+{
+	gpiochip_add(&orion_gpiochip);
+}
 
 /*
  * Orion-specific GPIO API extensions.
  */
 void __init orion_gpio_set_unused(unsigned pin)
 {
-	/*
-	 * Configure as output, drive low.
-	 */
+	/* Configure as output, drive low. */
 	__set_level(pin, 0);
 	__set_direction(pin, 0);
 }
@@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode)
 void orion_gpio_set_blink(unsigned pin, int blink)
 {
 	unsigned long flags;
-	u32 u;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Set output value to zero.
-	 */
+	/* Set output value to zero. */
 	__set_level(pin, 0);
 
-	u = readl(GPIO_BLINK_EN(pin));
-	if (blink)
-		u |= 1 << (pin & 31);
-	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Set blinking. */
+	__set_blinking(pin, blink);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
@@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 }
 
 struct irq_chip orion_gpio_irq_chip = {
-	.name		= "orion_gpio",
+	.name		= "orion_gpio_irq",
 	.ack		= gpio_irq_ack,
 	.mask		= gpio_irq_mask,
 	.unmask		= gpio_irq_unmask,
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 33f6c6aec18..9646a94ed3d 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -14,12 +14,9 @@
 /*
  * GENERIC_GPIO primitives.
  */
-int gpio_request(unsigned pin, const char *label);
-void gpio_free(unsigned pin);
-int gpio_direction_input(unsigned pin);
-int gpio_direction_output(unsigned pin, int value);
-int gpio_get_value(unsigned pin);
-void gpio_set_value(unsigned pin, int value);
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
 
 /*
  * Orion-specific GPIO API extensions.
@@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value);
 void orion_gpio_set_unused(unsigned pin);
 void orion_gpio_set_blink(unsigned pin, int blink);
 
-#define GPIO_BIDI_OK		(1 << 0)
-#define GPIO_INPUT_OK		(1 << 1)
-#define GPIO_OUTPUT_OK		(1 << 2)
+#define GPIO_INPUT_OK		(1 << 0)
+#define GPIO_OUTPUT_OK		(1 << 1)
 void orion_gpio_set_valid(unsigned pin, int mode);
 
+/* Initialize gpiolib. */
+void __init orion_gpio_init(void);
+
 /*
  * GPIO interrupt handling.
  */
diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
index 3c9cf6a305e..665c362a2fb 100644
--- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h
+++ b/arch/arm/plat-orion/include/plat/orion_wdt.h
@@ -1,15 +1,15 @@
 /*
- * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ * arch/arm/plat-orion/include/plat/orion_wdt.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_ORION5X_WDT_H
-#define __PLAT_ORION5X_WDT_H
+#ifndef __PLAT_ORION_WDT_H
+#define __PLAT_ORION_WDT_H
 
-struct orion5x_wdt_platform_data {
+struct orion_wdt_platform_data {
 	u32	tclk;		/* no <linux/clk.h> support yet */
 };
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index de8a001fc3a..715a30177f2 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,11 +12,15 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/bridge-regs.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
@@ -39,6 +43,56 @@ static u32 ticks_per_jiffy;
 
 
 /*
+ * Orion's sched_clock implementation. It has a resolution of
+ * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
+ *
+ * Because the hardware timer period is quite short (21 secs if
+ * 200MHz TCLK) and because cnt32_to_63() needs to be called at
+ * least once per half period to work properly, a kernel timer is
+ * set up to ensure this requirement is always met.
+ */
+#define TCLK2NS_SCALE_FACTOR 8
+
+static unsigned long tclk2ns_scale;
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
+	return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+}
+
+static struct timer_list cnt32_to_63_keepwarm_timer;
+
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+static void __init setup_sched_clock(unsigned long tclk)
+{
+	unsigned long long v;
+	unsigned long data;
+
+	v = NSEC_PER_SEC;
+	v <<= TCLK2NS_SCALE_FACTOR;
+	v += tclk/2;
+	do_div(v, tclk);
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (v & 1)
+		v++;
+	tclk2ns_scale = v;
+
+	data = (0xffffffffUL / tclk / 2 - 2) * HZ;
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+}
+
+/*
  * Clocksource handling.
  */
 static cycle_t orion_clksrc_read(struct clocksource *cs)
@@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
+	/*
+	 * Set scale and timer for sched_clock
+	 */
+	setup_sched_clock(tclk);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
@@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 	orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
 	clocksource_register(&orion_clksrc);
 
-
 	/*
 	 * Setup clockevent timer (interrupt-driven.)
 	 */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 8f2c4c7fbd4..0264bfb0ca4 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -7,3 +7,5 @@ obj-y	:= dma.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h
index 1a9f65e6ec0..1a9f65e6ec0 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/plat-pxa/include/plat/i2c.h
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index fcdd374437a..a9eabdcfa16 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -21,6 +21,19 @@
 
 #include <asm/div64.h>
 
+#define HAS_SECONDARY_PWM	0x10
+#define PWM_ID_BASE(d)		((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 1 },
+	{ "pxa910-pwm", 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
 #define PWMDCR		(0x04)
@@ -31,7 +44,8 @@
 
 struct pwm_device {
 	struct list_head	node;
-	struct platform_device *pdev;
+	struct pwm_device	*secondary;
+	struct platform_device	*pdev;
 
 	const char	*label;
 	struct clk	*clk;
@@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm)
 	mutex_unlock(&pwm_lock);
 }
 
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
-		unsigned int pwm_id, struct pwm_device *parent_pwm)
+static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct pwm_device *pwm;
+	struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;
 
 	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
 	if (pwm == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 	}
 
 	pwm->clk = clk_get(&pdev->dev, NULL);
@@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 	pwm->clk_enabled = 0;
 
 	pwm->use_count = 0;
-	pwm->pwm_id = pwm_id;
+	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
 	pwm->pdev = pdev;
 
-	if (parent_pwm != NULL) {
-		/* registers for the second PWM has offset of 0x10 */
-		pwm->mmio_base = parent_pwm->mmio_base + 0x10;
-		__add_pwm(pwm);
-		return pwm;
-	}
-
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 		goto err_free_mem;
 	}
 
+	if (id->driver_data & HAS_SECONDARY_PWM) {
+		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+		if (secondary == NULL) {
+			ret = -ENOMEM;
+			goto err_free_mem;
+		}
+
+		*secondary = *pwm;
+		pwm->secondary = secondary;
+
+		/* registers for the second PWM has offset of 0x10 */
+		secondary->mmio_base = pwm->mmio_base + 0x10;
+		secondary->pwm_id = pdev->id + 2;
+	}
+
 	__add_pwm(pwm);
+	if (secondary)
+		__add_pwm(secondary);
+
 	platform_set_drvdata(pdev, pwm);
-	return pwm;
+	return 0;
 
 err_free_mem:
 	release_mem_region(r->start, r->end - r->start + 1);
@@ -221,32 +246,7 @@ err_free_clk:
 	clk_put(pwm->clk);
 err_free:
 	kfree(pwm);
-	return ERR_PTR(ret);
-}
-
-static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
-}
-
-static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-
-	pwm = pwm_probe(pdev, pdev->id, NULL);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	pwm = pwm_probe(pdev, pdev->id + 2, pwm);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
+	return ret;
 }
 
 static int __devexit pwm_remove(struct platform_device *pdev)
@@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 		return -ENODEV;
 
 	mutex_lock(&pwm_lock);
+
+	if (pwm->secondary) {
+		list_del(&pwm->secondary->node);
+		kfree(pwm->secondary);
+	}
+
 	list_del(&pwm->node);
 	mutex_unlock(&pwm_lock);
 
@@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver pxa25x_pwm_driver = {
+static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
+		.owner	= THIS_MODULE,
 	},
-	.probe		= pxa25x_pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static struct platform_driver pxa27x_pwm_driver = {
-	.driver		= {
-		.name	= "pxa27x-pwm",
-	},
-	.probe		= pxa27x_pwm_probe,
+	.probe		= pwm_probe,
 	.remove		= __devexit_p(pwm_remove),
+	.id_table	= pwm_id_table,
 };
 
 static int __init pwm_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&pwm_driver);
 }
 arch_initcall(pwm_init);
 
 static void __exit pwm_exit(void)
 {
-	platform_driver_unregister(&pxa25x_pwm_driver);
-	platform_driver_unregister(&pxa27x_pwm_driver);
+	platform_driver_unregister(&pwm_driver);
 }
 module_exit(pwm_exit);
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de9383814e5..935c7558469 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
 config S3C2410_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
 	depends on PM && CRC32
@@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
@@ -172,4 +188,14 @@ config S3C_DEV_FB
 	help
 	  Compile in platform device definition for framebuffer
 
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d25a5..610651455a7 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,9 +18,14 @@ obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # devices
@@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
new file mode 100644
index 00000000000..e2f604b51c8
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb-hsotg.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
new file mode 100644
index 00000000000..2ee85abed6d
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C_PA_USBHOST,
+		.end   = S3C_PA_USBHOST + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
new file mode 100644
index 00000000000..c9db75c06af
--- /dev/null
+++ b/arch/arm/plat-s3c/dma.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index d71dd6d9ce5..260fdc6ad68 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
 	if (!gc->get)
 		gc->get = s3c_gpiolib_get;
 
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
 	/* gpiochip_add() prints own failure message on error. */
 	ret = gpiochip_add(gc);
 	if (ret >= 0)
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a404b0..d847bd476b6 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,12 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					       void (*select)(unsigned selected),
-					       void (*conv)(unsigned d0, unsigned d1),
-					       unsigned int is_ts);
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(unsigned selected),
+			 void (*conv)(unsigned d0, unsigned d1,
+				      unsigned *samples_left),
+			 unsigned int is_ts);
 
 extern void s3c_adc_release(struct s3c_adc_client *client);
 
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index a10622eed43..d86af84b5b8 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -50,6 +50,7 @@ extern struct clk clk_xtal;
 extern struct clk clk_ext;
 
 /* S3C64XX specific clocks */
+extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index e62ae0fcfe5..be541cbba07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 26f0cec3ac0..a0b6768fddc 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
new file mode 100644
index 00000000000..32ff2a92cb3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma-core.h
@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
new file mode 100644
index 00000000000..34dba98f08e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
index 2fc60a580ac..32af612767a 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -20,6 +20,18 @@
  * specific code.
 */
 
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+	void (*save)(struct s3c_gpio_chip *chip);
+	void (*resume)(struct s3c_gpio_chip *chip);
+};
+
 struct s3c_gpio_cfg;
 
 /**
@@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung
  * specific gpios being registered with gpiolib.
@@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
 struct s3c_gpio_chip {
 	struct gpio_chip	chip;
 	struct s3c_gpio_cfg	*config;
+	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
 };
 
 static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
 
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 3779775133a..7a797192fcf 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
 
 extern unsigned long s3c_pm_flags;
 
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
 /* from sleep.S */
 
 extern int  s3c_cpu_save(unsigned long *saveblk);
@@ -88,6 +90,7 @@ struct pm_uart_save {
 	u32	ufcon;
 	u32	umcon;
 	u32	ubrdiv;
+	u32	udivslot;
 };
 
 /* helper functions to save/restore lists of registers. */
@@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
 #endif
 
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
 /* suspend memory checking */
 
 #ifdef CONFIG_S3C2410_PM_CHECK
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 487d7d2a7e1..66af75a5cdd 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -189,6 +189,11 @@
 
 #define S3C2443_DIVSLOT		  (0x2C)
 
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP		0x30
+#define S3C64XX_UINTSP		0x34
+#define S3C64XX_UINTM		0x38
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index c4ca3920ca4..f615308ccdf 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif  /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
 #ifdef CONFIG_S3C6410_SETUP_SDHCI
 extern char *s3c6410_hsmmc_clksrcs[4];
 
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
 extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   void __iomem *r,
 					   struct mmc_ios *ios,
@@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 static inline void s3c6410_default_sdhci0(void)
 {
 	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
@@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void)
 {
 	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
new file mode 100644
index 00000000000..dd04db04310
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hostg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
new file mode 100644
index 00000000000..54b762acb5a
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -0,0 +1,49 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+	struct clk *wdtclk;
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
new file mode 100644
index 00000000000..cfd326a8b69
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+	.save	= s3c_gpio_pm_1bit_save,
+	.resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+	.save	= s3c_gpio_pm_2bit_save,
+	.resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	s3c_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		s3c_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+	.save	= s3c_gpio_pm_4bit_save,
+	.resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 061182ca66e..8d97db2c7a0 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -21,11 +21,10 @@
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 #include <asm/irq.h>
 
@@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void)
 
 /* Save the UART configurations if we are configured for debug. */
 
+unsigned char pm_uart_udivslot;
+
 #ifdef CONFIG_S3C2410_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
 }
 
 static void s3c_pm_save_uarts(void)
@@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 {
 	void __iomem *regs = S3C_VA_UARTx(uart);
 
+	s3c_pm_arch_update_uart(regs, save);
+
 	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
 	__raw_writel(save->ucon,  regs + S3C2410_UCON);
 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
 }
 
 static void s3c_pm_restore_uarts(void)
@@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2c8a2f5d75f..5b0bc914f58 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -71,6 +71,7 @@ config PM_SIMTEC
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C2410
+	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
 	  use the S3C2410's DMA system to move data to and from the
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 91adfa71c17..ee1baf11ad9 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
 	unsigned char		 channel;
 
 	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2);
+	void	(*convert_cb)(unsigned val1, unsigned val2,
+			      unsigned *samples_left);
 };
 
 struct adc_device {
@@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
 					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1),
+					void (*conv)(unsigned d0, unsigned d1,
+						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
@@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	data1 = readl(adc->regs + S3C2410_ADCDAT1);
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+	client->nr_samples--;
+	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
 
-	if (--client->nr_samples > 0) {
+	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
 		client->select_cb(1);
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347cec20..aa119863c5c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
@@ -47,27 +48,27 @@
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
+	.gpio		= S3C2410_GPF(4),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
+	.gpio		= S3C2410_GPF(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
+	.gpio		= S3C2410_GPF(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
+	.gpio		= S3C2410_GPF(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
 
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 16ac01d9b8a..4eb378c89a3 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
 struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 07326f63236..196b1912365 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -31,10 +31,10 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
-
 #include <mach/map.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
@@ -44,8 +44,6 @@ static int dma_channels;
 
 static struct s3c24xx_dma_selection dma_sel;
 
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 #define dbg_showchan(chan) do { } while(0)
 #endif /* CONFIG_S3C2410_DMA_DEBUG */
 
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
 /* s3c2410_dma_stats_timeout
  *
  * Update DMA stats from timeout info
@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 	return 0;
 }
 
-
-
 /* s3c2410_dma_loadbuffer
  *
  * load a buffer, and update the channel state
@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
 
 int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
 
 	if (chan == NULL)
@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 	chan->irq_claimed = 0;
 
 	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
+		s3c_dma_chan_map[channel] = NULL;
 
 	local_irq_restore(flags);
 
@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 int
 s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
 /* s3c2410_dma_config
  *
  * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
 */
 
 int s3c2410_dma_config(unsigned int channel,
-		       int xferunit,
-		       int dcon)
+		       int xferunit)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int dcon;
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __func__, channel, xferunit, dcon);
@@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
 
 	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
-	dcon |= chan->dcon & dma_sel.dcon_mask;
+	dcon = chan->dcon & dma_sel.dcon_mask;
 
 	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
+	switch (chan->req_ch) {
+	case DMACH_I2S_IN:
+	case DMACH_I2S_OUT:
+	case DMACH_PCM_IN:
+	case DMACH_PCM_OUT:
+	case DMACH_MIC_IN:
+	default:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_SDI:
+		/* note, ensure if need HANDSHAKE or not */
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_XD0:
+	case DMACH_XD1:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_HCLK;
+		break;
+	}
+
 	switch (xferunit) {
 	case 1:
 		dcon |= S3C2410_DCON_BYTE;
@@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
 
 EXPORT_SYMBOL(s3c2410_dma_config);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
 /* s3c2410_dma_devconfig
  *
@@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
  * source:    S3C2410_DMASRC_HW: source is hardware
  *            S3C2410_DMASRC_MEM: source is memory
  *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=source is AHB, 1=source is APB
- *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(int channel,
 			  enum s3c2410_dmasrc source,
-			  int hwcfg,
 			  unsigned long devaddr)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int hwcfg;
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __func__, (int)source, hwcfg, devaddr);
+	pr_debug("%s: source=%d, devaddr=%08lx\n",
+		 __func__, (int)source, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
-	chan->hw_cfg = hwcfg;
+
+	switch (chan->req_ch) {
+	case DMACH_XD0:
+	case DMACH_XD1:
+		hwcfg = 0; /* AHB */
+		break;
+
+	default:
+		hwcfg = S3C2410_DISRCC_APB;
+	}
+
+	/* always assume our peripheral desintation is a fixed
+	 * address in memory. */
+	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
 	case S3C2410_DMASRC_HW:
@@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
-	s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
-	s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+	s3c2410_dma_config(no, cp->xfer_unit);
+	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
 
 	/* re-select the dma source for this channel */
 
@@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
  found:
 	dmach = &s3c2410_chans[ch];
 	dmach->map = ch_map;
-	dma_chan_map[channel] = dmach;
+	dmach->req_ch = channel;
+	s3c_dma_chan_map[channel] = dmach;
 
 	/* select the channel */
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 4a899c279eb..95df059b5a1 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 
 int s3c2410_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
+	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+		return -EINVAL;	/* not valid interrupts */
 
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
+	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+		return -EINVAL;	/* not valid pin */
 
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+	if (pin < S3C2410_GPF(4))
+		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
 
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+	if (pin < S3C2410_GPG(0))
+		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
 
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
-	if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
-		return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
-	if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
-		return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
-	if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
-		return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 5c0491bf738..6d7a961d326 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -22,6 +23,7 @@
 #include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 
@@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.base	= S3C2410_GPACON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
-			.base			= S3C2410_GPA0,
+			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
 			.ngpio			= 24,
@@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[1] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.base	= S3C2410_GPBCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPB0,
+			.base			= S3C2410_GPB(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
 		},
 	},
 	[2] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.base	= S3C2410_GPCCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPC0,
+			.base			= S3C2410_GPC(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
 		},
 	},
 	[3] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.base	= S3C2410_GPDCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPD0,
+			.base			= S3C2410_GPD(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
 		},
 	},
 	[4] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.base	= S3C2410_GPECON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPE0,
+			.base			= S3C2410_GPE(0),
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
 		},
 	},
 	[5] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.base	= S3C2410_GPFCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPF0,
+			.base			= S3C2410_GPF(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
@@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[6] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.base	= S3C2410_GPGCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPG0,
+			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
-			.ngpio			= 10,
+			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
+	}, {
+		.base	= S3C2410_GPHCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPH(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOH",
+			.ngpio			= 11,
+		},
 	},
 };
 
@@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
index c78efe316fc..9565ead1bc9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,8 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/dma-core.h>
+
 extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
 #define DMA_CH_NEVER		(1<<30)
@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
 	const char		*name;
 	struct s3c24xx_dma_addr  hw_addr;
 
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
 };
 
 struct s3c24xx_dma_selection {
@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
 */
 
 struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
 	unsigned int	flags;				/* flags */
 };
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index eed8f78e759..c4d133436fc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -58,7 +58,6 @@
 #define S3C24XX_SZ_SPI		SZ_1M
 #define S3C24XX_SZ_SDI		SZ_1M
 #define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_USBHOST	SZ_1M
 
 /* GPIO ports */
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
index c75882113e0..fb45dd9adca 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
 				s3c_irqwake_eintmask);
 }
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
new file mode 100644
index 00000000000..3bc0a216df9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -0,0 +1,145 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1<<0)
+#define S3C2410_DISRCC_APB		(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP		(1<<2)
+#define S3C2410_DMASKTRIG_ON		(1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
+
+#define S3C2410_DCON_DEMAND		(0<<31)
+#define S3C2410_DCON_HANDSHAKE		(1<<31)
+#define S3C2410_DCON_SYNC_PCLK		(0<<30)
+#define S3C2410_DCON_SYNC_HCLK		(1<<30)
+
+#define S3C2410_DCON_INTREQ		(1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
+#define S3C2410_DCON_CH0_UART0		(1<<24)
+#define S3C2410_DCON_CH0_SDI		(2<<24)
+#define S3C2410_DCON_CH0_TIMER		(3<<24)
+#define S3C2410_DCON_CH0_USBEP1		(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
+#define S3C2410_DCON_CH1_UART1		(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
+#define S3C2410_DCON_CH1_SPI		(3<<24)
+#define S3C2410_DCON_CH1_USBEP2		(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
+#define S3C2410_DCON_CH2_SDI		(2<<24)
+#define S3C2410_DCON_CH2_TIMER		(3<<24)
+#define S3C2410_DCON_CH2_USBEP3		(4<<24)
+
+#define S3C2410_DCON_CH3_UART2		(0<<24)
+#define S3C2410_DCON_CH3_SDI		(1<<24)
+#define S3C2410_DCON_CH3_SPI		(2<<24)
+#define S3C2410_DCON_CH3_TIMER		(3<<24)
+#define S3C2410_DCON_CH3_USBEP4		(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7<<24)
+
+#define S3C2410_DCON_BYTE		(0<<20)
+#define S3C2410_DCON_HALFWORD		(1<<20)
+#define S3C2410_DCON_WORD		(2<<20)
+
+#define S3C2410_DCON_AUTORELOAD		(0<<22)
+#define S3C2410_DCON_NORELOAD		(1<<22)
+#define S3C2410_DCON_HWTRIG		(1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT		(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
+#define S3C2440_DCON_CH0_PCMIN		(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
+#define S3C2440_DCON_CH1_SDI		(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5<<24)
+#define S3C2440_DCON_CH2_MICIN		(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN		(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 062a29339a9..56e5253ca02 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -30,6 +30,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
@@ -75,43 +76,10 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_CLKSLOW),
 };
 
-static struct gpio_sleep {
-	void __iomem	*base;
-	unsigned int	 gpcon;
-	unsigned int	 gpdat;
-	unsigned int	 gpup;
-} gpio_save[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-	},
-	[7] = {
-		.base	= S3C2410_GPHCON,
-	},
-};
-
 static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void)
 	 * and then configure it as an input if it is not
 	*/
 
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
-	}
-
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 	}
-}
-
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON	(S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	unsigned int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		void __iomem *base = gps->base;
-
-		gps->gpcon = __raw_readl(base + OFFS_CON);
-		gps->gpdat = __raw_readl(base + OFFS_DAT);
-
-		if (gpio > 0)
-			gps->gpup = __raw_readl(base + OFFS_UP);
 
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 	}
 }
 
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
-	void __iomem *base = gps->base;
-	unsigned long gps_gpcon = gps->gpcon;
-	unsigned long gps_gpdat = gps->gpdat;
-	unsigned long old_gpcon;
-	unsigned long old_gpdat;
-	unsigned long old_gpup = 0x0;
-	unsigned long gpcon;
-	int nr;
-
-	old_gpcon = __raw_readl(base + OFFS_CON);
-	old_gpdat = __raw_readl(base + OFFS_DAT);
-
-	if (base == S3C2410_GPACON) {
-		/* GPACON only has one bit per control / data and no PULLUPs.
-		 * GPACON[x] = 0 => Output, 1 => SFN */
-
-		/* first set all SFN bits to SFN */
-
-		gpcon = old_gpcon | gps->gpcon;
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* now set all the other bits */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-	} else {
-		unsigned long old, new, mask;
-		unsigned long change_mask = 0x0;
-
-		old_gpup = __raw_readl(base + OFFS_UP);
-
-		/* Create a change_mask of all the items that need to have
-		 * their CON value changed before their DAT value, so that
-		 * we minimise the work between the two settings.
-		 */
-
-		for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-			old = (old_gpcon & mask) >> nr;
-			new = (gps_gpcon & mask) >> nr;
-
-			/* If there is no change, then skip */
-
-			if (old == new)
-				continue;
-
-			/* If both are special function, then skip */
-
-			if (is_sfn(old) && is_sfn(new))
-				continue;
-
-			/* Change is IN => OUT, do not change now */
-
-			if (is_in(old) && is_out(new))
-				continue;
-
-			/* Change is SFN => OUT, do not change now */
-
-			if (is_sfn(old) && is_out(new))
-				continue;
-
-			/* We should now be at the case of IN=>SFN,
-			 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-			change_mask |= mask;
-		}
-
-		/* Write the new CON settings */
-
-		gpcon = old_gpcon & ~change_mask;
-		gpcon |= gps_gpcon & change_mask;
-
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* Now change any items that require DAT,CON */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-		__raw_writel(gps->gpup, base + OFFS_UP);
-	}
-
-	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
-		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		s3c2410_pm_restore_gpio(gpio, gps);
-	}
-}
 
 void s3c_pm_restore_core(void)
 {
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index d62b7e7fb35..71a6accf114 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -11,6 +11,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 
 struct platform_device;
 
@@ -20,6 +21,6 @@ struct platform_device;
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cbb53d..9edf7894eed 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e549f..f34d0fc69ad 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a00a7d..5ebd8b425a5 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
 
@@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK
 	  Common clock support code for the S3C6400 that is shared
 	  by other CPUs in the series, such as the S3C6410.
 
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79bf8f3..2ed5df34f9e 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,8 +24,19 @@ obj-y				+= gpiolib.o
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index ad1b9682c9c..0bc2fa1dfc4 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -27,6 +27,12 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
 struct clk clk_27m = {
 	.name		= "clk_27m",
 	.id		= -1,
@@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_48m,
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
 	},
 };
 
@@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = {
 	&clk_epll,
 	&clk_27m,
 	&clk_48m,
+	&clk_h2,
 };
 
 void __init s3c64xx_register_clocks(void)
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 91f49a3a665..b1fdd83940a 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	iotable_init(mach_desc, size);
 
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
 	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
new file mode 100644
index 00000000000..67aa93dbb69
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -0,0 +1,722 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+	/* note, we currently do not bother to work out which buffer
+	 * or buffers have been completed since the last tc-irq. */
+
+	if (chan->callback_fn)
+		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			s3c64xx_dma_tcirq(dmac, offs);
+		}
+
+		if (errstat & bit) {
+			s3c64xx_dma_errirq(dmac, offs);
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 78ee52cffc9..da7b60ee5e6 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 }
 
 static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
 }
 
 static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
 	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
 			    s3c64xx_gpiolib_add_4bit2);
 
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
new file mode 100644
index 00000000000..0c30dd98672
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index f865bf4d709..743a70094d0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -157,6 +157,7 @@
 
 #define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
 #define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
 
 /* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
  * that they are sourced from the GPIO pins but with a different scheme for
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
new file mode 100644
index 00000000000..d347de3ba0d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index b1082c16324..52836d41e33 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -32,6 +32,7 @@
 #define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index 571eaa2e54f..11f2e1e119b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -15,12 +15,13 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
 extern void s3c6400_init_clocks(int xtal);
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 47e5155bb13..f81b7b818ba 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -26,6 +27,7 @@
 
 #include <mach/map.h>
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
@@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = {
 	.mask_ack	= s3c_irq_eint_maskack,
 	.ack		= s3c_irq_eint_ack,
 	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
new file mode 100644
index 00000000000..ca523b5d4c1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f22edf7c2d2..8dc5b6da978 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -14,12 +14,14 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
+#include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
 #include <plat/cpu.h>
 
@@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
 }
 
 /* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
 
 static void s3c_irq_uart_mask(unsigned int irq)
 {
@@ -233,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
 	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
 
 	/* add the timer sub-irqs */
 
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
new file mode 100644
index 00000000000..07a6516a4f3
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 05b17528041..1debc1f9f98 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = {
 	.sources	= &clk_src_mpll,
 };
 
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s3c64xx_clk_arm_get_rate,
+	.set_rate	= s3c64xx_clk_arm_set_rate,
+	.round_rate	= s3c64xx_clk_arm_round_rate,
+};
+
 static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -520,6 +579,33 @@ static struct clksrc_clk clk_irda = {
 	.reg_divider	= S3C_CLK_DIV2,
 };
 
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+	.clk	= {
+		.name		= "camera",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= 0,
+	.mask		= 0,
+	.sources	= &clkset_camif,
+	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
+	.reg_divider	= S3C_CLK_DIV0,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -536,6 +622,7 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_audio0,
 	&clk_audio1,
 	&clk_irda,
+	&clk_camif,
 };
 
 static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -608,6 +695,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	clk_fout_epll.rate = epll;
 	clk_fout_apll.rate = apll;
 
+	clk_h2.rate = hclk2;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
@@ -635,14 +723,30 @@ static struct clk *clks[] __initdata = {
 	&clk_audio0.clk,
 	&clk_audio1.clk,
 	&clk_irda.clk,
+	&clk_camif.clk,
+	&clk_arm,
 };
 
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 {
 	struct clk *clkp;
 	int ret;
 	int ptr;
 
+	armclk_mask = armclk_divlimit;
+
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
 		clkp = clks[ptr];
 		ret = s3c24xx_register_clock(clkp);
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..5417123b0ac
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
new file mode 100644
index 00000000000..8e71fe90a37
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
new file mode 100644
index 00000000000..2cf37c35951
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_STMP3XXX
+
+menu "Freescale STMP3xxx implementations"
+
+choice
+	prompt "Select STMP3xxx chip family"
+
+config ARCH_STMP37XX
+	bool "Freescale SMTP37xx"
+	select CPU_ARM926T
+	---help---
+	 STMP37xx refers to 3700 through 3769 chips
+
+config ARCH_STMP378X
+	bool "Freescale STMP378x"
+	select CPU_ARM926T
+	---help---
+	 STMP378x refers to 3780 through 3789 chips
+
+endchoice
+
+choice
+	prompt "Select STMP3xxx board type"
+
+config MACH_STMP37XX
+	depends on ARCH_STMP37XX
+	bool "Freescale STMP37xx development board"
+
+config MACH_STMP378X
+	depends on ARCH_STMP378X
+	bool "Freescale STMP378x development board"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile
new file mode 100644
index 00000000000..31dd518f37a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+# Object file lists.
+obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
new file mode 100644
index 00000000000..5d2f19a09e4
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -0,0 +1,1135 @@
+/*
+ * Clock manipulation routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/clkdev.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static struct clk osc_24M;
+static struct clk pll_clk;
+static struct clk cpu_clk;
+static struct clk hclk;
+
+static int propagate_rate(struct clk *);
+
+static inline int clk_is_busy(struct clk *clk)
+{
+	return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk) && clk->ops;
+}
+
+static int std_clk_enable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg &= ~(1 << clk->enable_shift);
+		else
+			clk_reg |= (1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		if (clk->enable_wait)
+			udelay(clk->enable_wait);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int std_clk_disable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg |= (1 << clk->enable_shift);
+		else
+			clk_reg &= ~(1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int io_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_frac, clkctrl_frac;
+	int i, ret = 0, mask = 0x1f;
+
+	clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
+
+	if (clkctrl_frac < 18 || clkctrl_frac > 35) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+	__raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
+				clk->scale_reg);
+	if (clk->busy_reg) {
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
+	}
+out:
+	return ret;
+}
+
+static long io_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+	int mask = 0x1f;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long per_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	if (clk->enable_reg &&
+			!(__raw_readl(clk->enable_reg) & clk->enable_shift))
+		clk->rate = 0;
+	else {
+		div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+		if (div)
+			rate /= div;
+		clk->rate = rate;
+	}
+
+	return clk->rate;
+}
+
+static int per_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = -EINVAL;
+	int div = (clk->parent->rate + rate - 1) / rate;
+	u32 reg_frac;
+	const int mask = 0xff;
+	int try = 10;
+	int i = -1;
+
+	if (div == 0 || div > mask)
+		goto out;
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+
+	while (try--) {
+		__raw_writel(reg_frac | (div << clk->scale_shift),
+				clk->scale_reg);
+
+		if (clk->busy_reg) {
+			for (i = 10000; i; i--)
+				if (!clk_is_busy(clk))
+					break;
+		}
+		if (i)
+			break;
+	}
+
+	if (!i)
+		ret = -ETIMEDOUT;
+	else
+		ret = 0;
+
+out:
+	if (ret != 0)
+		printk(KERN_ERR "%s: error %d\n", __func__, ret);
+	return ret;
+}
+
+static long lcdif_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	if (div) {
+		rate /= div;
+		div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
+			BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
+		rate /= div;
+	}
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int lcdif_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = 0;
+	/*
+	 * On 3700, we can get most timings exact by modifying ref_pix
+	 * and the divider, but keeping the phase timings at 1 (2
+	 * phases per cycle).
+	 *
+	 * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
+	 * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
+	 *
+	 * ns_cycle >= 2*18e3/(18*480) = 25/6
+	 * ns_cycle <= 2*35e3/(18*480) = 875/108
+	 *
+	 * Multiply the ns_cycle by 'div' to lengthen it until it fits the
+	 * bounds. This is the divider we'll use after ref_pix.
+	 *
+	 * 6 * ns_cycle >= 25 * div
+	 * 108 * ns_cycle <= 875 * div
+	 */
+	u32 ns_cycle = 1000000 / rate;
+	u32 div, reg_val;
+	u32 lowest_result = (u32) -1;
+	u32 lowest_div = 0, lowest_fracdiv = 0;
+
+	for (div = 1; div < 256; ++div) {
+		u32 fracdiv;
+		u32 ps_result;
+		int lower_bound = 6 * ns_cycle >= 25 * div;
+		int upper_bound = 108 * ns_cycle <= 875 * div;
+		if (!lower_bound)
+			break;
+		if (!upper_bound)
+			continue;
+		/*
+		 * Found a matching div. Calculate fractional divider needed,
+		 * rounded up.
+		 */
+		fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
+				ns_cycle + 1000 * div - 1) /
+				(1000 * div);
+		if (fracdiv < 18 || fracdiv > 35) {
+			ret = -EINVAL;
+			goto out;
+		}
+		/* Calculate the actual cycle time this results in */
+		ps_result = 6250 * div * fracdiv / 27;
+
+		/* Use the fastest result that doesn't break ns_cycle */
+		if (ps_result <= lowest_result) {
+			lowest_result = ps_result;
+			lowest_div = div;
+			lowest_fracdiv = fracdiv;
+		}
+	}
+
+	if (div >= 256 || lowest_result == (u32) -1) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
+			"PIXCLK=%uMHz cycle=%u.%03uns\n",
+			lowest_fracdiv, lowest_div,
+			480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
+			lowest_result / 1000, lowest_result % 1000);
+
+	/* Program ref_pix phase fractional divider */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+	reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
+	reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Ungate PFD */
+	stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Program pix divider */
+	reg_val = __raw_readl(clk->scale_reg);
+	reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
+	reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
+	__raw_writel(reg_val, clk->scale_reg);
+
+	/* Wait for divider update */
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	/* Switch to ref_pix source */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+	reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+
+out:
+	return ret;
+}
+
+
+static int cpu_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_val;
+
+	if (rate < 24000)
+		return -EINVAL;
+	else if (rate == 24000) {
+		/* switch to the 24M source */
+		clk_set_parent(clk, &osc_24M);
+	} else {
+		int i;
+		u32 clkctrl_cpu = 1;
+		u32 c = clkctrl_cpu;
+		u32 clkctrl_frac = 1;
+		u32 val;
+		for ( ; c < 0x40; c++) {
+			u32 f = (pll_clk.rate*18/c + rate/2) / rate;
+			int s1, s2;
+
+			if (f < 18 || f > 35)
+				continue;
+			s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
+			s2 = pll_clk.rate*18/c/f - rate;
+			pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
+			if (abs(s1) > abs(s2)) {
+				clkctrl_cpu = c;
+				clkctrl_frac = f;
+			}
+			if (s2 == 0)
+				break;
+		};
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (c == 0x40) {
+			int  d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
+				rate;
+			if (abs(d) > 100 ||
+			    clkctrl_frac < 18 || clkctrl_frac > 35)
+				return -EINVAL;
+		}
+
+		/* 4.6.2 */
+		val = __raw_readl(clk->scale_reg);
+		val &= ~(0x3f << clk->scale_shift);
+		val |= clkctrl_frac;
+		clk_set_parent(clk, &osc_24M);
+		udelay(10);
+		__raw_writel(val, clk->scale_reg);
+		/* ungate */
+		__raw_writel(1<<7, clk->scale_reg + 8);
+		/* write clkctrl_cpu */
+		clk->saved_div = clkctrl_cpu;
+
+		reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+		reg_val &= ~0x3F;
+		reg_val |= clkctrl_cpu;
+		__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+		clk_set_parent(clk, &pll_clk);
+		clk->saved_div = 0;
+		udelay(10);
+	}
+	return 0;
+}
+
+static long cpu_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
+	rate = ((rate + 9) / 10) * 10;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long cpu_round_rate(struct clk *clk, u32 rate)
+{
+	unsigned long r = 0;
+
+	if (rate <= 24000)
+		r = 24000;
+	else {
+		u32 clkctrl_cpu = 1;
+		u32 clkctrl_frac;
+		do {
+			clkctrl_frac =
+				(pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
+			if (clkctrl_frac > 35)
+				continue;
+			if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
+			    rate / 10)
+				break;
+		} while (pll_clk.rate / 2  >= clkctrl_cpu++ * rate);
+		if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
+			clkctrl_cpu--;
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (clkctrl_frac < 18)
+			clkctrl_frac = 18;
+		if (clkctrl_frac > 35)
+			clkctrl_frac = 35;
+
+		r = pll_clk.rate * 18;
+		r /= clkctrl_frac;
+		r /= clkctrl_cpu;
+		r = 10 * ((r + 9) / 10);
+	}
+	return r;
+}
+
+static long emi_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int clkseq_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+	int shift = 8;
+
+	/* bypass? */
+	if (parent == &osc_24M)
+		shift = 4;
+
+	if (clk->bypass_reg) {
+#ifdef CONFIG_ARCH_STMP378X
+		u32 hbus_val, cpu_val;
+
+		if (clk == &cpu_clk && shift == 4) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_CPU);
+
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val |= 1;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		} else if (clk == &cpu_clk && shift == 8) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_CPU);
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			hbus_val |= 2;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			if (clk->saved_div)
+				cpu_val |= clk->saved_div;
+			else
+				cpu_val |= 2;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		}
+#endif
+		__raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int hbus_set_rate(struct clk *clk, u32 rate)
+{
+	u8 div = 0;
+	int is_frac = 0;
+	u32 clkctrl_hbus;
+	struct clk *parent = clk->parent;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			parent->rate);
+
+	if (rate > parent->rate)
+		return -EINVAL;
+
+	if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
+	    parent->rate / rate < 32) {
+		pr_debug("%s: switching to fractional mode\n", __func__);
+		is_frac = 1;
+	}
+
+	if (is_frac)
+		div = (32 * rate + parent->rate / 2) / parent->rate;
+	else
+		div = (parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x1f)
+		return -EINVAL;
+
+	clk_set_parent(&cpu_clk, &osc_24M);
+	udelay(10);
+	clkctrl_hbus = __raw_readl(clk->scale_reg);
+	clkctrl_hbus &= ~0x3f;
+	clkctrl_hbus |= div;
+	clkctrl_hbus |= (is_frac << 5);
+
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	clk_set_parent(&cpu_clk, &pll_clk);
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	udelay(10);
+	return 0;
+}
+
+static long hbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	if (__raw_readl(clk->scale_reg) & 0x20) {
+		rate *= __raw_readl(clk->scale_reg) & 0x1f;
+		rate /= 32;
+	} else
+		rate /= __raw_readl(clk->scale_reg) & 0x1f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int xbus_set_rate(struct clk *clk, u32 rate)
+{
+	u16 div = 0;
+	u32 clkctrl_xbus;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			clk->parent->rate);
+
+	div = (clk->parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x3ff)
+		return -EINVAL;
+
+	clkctrl_xbus = __raw_readl(clk->scale_reg);
+	clkctrl_xbus &= ~0x3ff;
+	clkctrl_xbus |= div;
+	__raw_writel(clkctrl_xbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up xbus divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+static long xbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	rate /= __raw_readl(clk->scale_reg) & 0x3ff;
+	clk->rate = rate;
+
+	return rate;
+}
+
+
+/* Clock ops */
+
+static struct clk_ops std_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= per_get_rate,
+	.set_rate	= per_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops min_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+};
+
+static struct clk_ops cpu_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= cpu_get_rate,
+	.set_rate	= cpu_set_rate,
+	.round_rate	= cpu_round_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops io_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= io_get_rate,
+	.set_rate	= io_set_rate,
+};
+
+static struct clk_ops hbus_ops = {
+	.get_rate	= hbus_get_rate,
+	.set_rate	= hbus_set_rate,
+};
+
+static struct clk_ops xbus_ops = {
+	.get_rate	= xbus_get_rate,
+	.set_rate	= xbus_set_rate,
+};
+
+static struct clk_ops lcdif_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= lcdif_get_rate,
+	.set_rate	= lcdif_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops emi_ops = {
+	.get_rate	= emi_get_rate,
+};
+
+/* List of on-chip clocks */
+
+static struct clk osc_24M = {
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 24000,
+};
+
+static struct clk pll_clk = {
+	.parent		= &osc_24M,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 16,
+	.enable_wait	= 10,
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 480000,
+	.ops		= &min_ops,
+};
+
+static struct clk cpu_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 0,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
+	.busy_bit	= 28,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &cpu_ops,
+};
+
+static struct clk io_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 24,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &io_ops,
+};
+
+static struct clk hclk = {
+	.parent		= &cpu_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.busy_bit	= 29,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &hbus_ops,
+};
+
+static struct clk xclk = {
+	.parent		= &osc_24M,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_bit	= 31,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &xbus_ops,
+};
+
+static struct clk uart_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk audio_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 30,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk pwm_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 29,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk dri_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 28,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk digctl_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 27,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk timer_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 26,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk lcdif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &lcdif_ops,
+};
+
+static struct clk ssp_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.enable_shift	= 31,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 5,
+	.enable_negate	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk gpmi_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 4,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk spdif_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk emi_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 8,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.busy_bit	= 28,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 6,
+	.flags		= ENABLED,
+	.ops		= &emi_ops,
+};
+
+static struct clk ir_clk = {
+	.parent		= &io_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 3,
+	.ops		= &min_ops,
+};
+
+static struct clk saif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 0,
+	.ops		= &std_ops,
+};
+
+static struct clk usb_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 18,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+/* list of all the clocks */
+static struct clk_lookup onchip_clks[] = {
+	{
+		.con_id = "osc_24M",
+		.clk = &osc_24M,
+	}, {
+		.con_id = "pll",
+		.clk = &pll_clk,
+	}, {
+		.con_id = "cpu",
+		.clk = &cpu_clk,
+	}, {
+		.con_id = "hclk",
+		.clk = &hclk,
+	}, {
+		.con_id = "xclk",
+		.clk = &xclk,
+	}, {
+		.con_id = "io",
+		.clk = &io_clk,
+	}, {
+		.con_id = "uart",
+		.clk = &uart_clk,
+	}, {
+		.con_id = "audio",
+		.clk = &audio_clk,
+	}, {
+		.con_id = "pwm",
+		.clk = &pwm_clk,
+	}, {
+		.con_id = "dri",
+		.clk = &dri_clk,
+	}, {
+		.con_id = "digctl",
+		.clk = &digctl_clk,
+	}, {
+		.con_id = "timer",
+		.clk = &timer_clk,
+	}, {
+		.con_id = "lcdif",
+		.clk = &lcdif_clk,
+	}, {
+		.con_id = "ssp",
+		.clk = &ssp_clk,
+	}, {
+		.con_id = "gpmi",
+		.clk = &gpmi_clk,
+	}, {
+		.con_id = "spdif",
+		.clk = &spdif_clk,
+	}, {
+		.con_id = "emi",
+		.clk = &emi_clk,
+	}, {
+		.con_id = "ir",
+		.clk = &ir_clk,
+	}, {
+		.con_id = "saif",
+		.clk = &saif_clk,
+	}, {
+		.con_id = "usb",
+		.clk = &usb_clk,
+	},
+};
+
+static int __init propagate_rate(struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (unlikely(!clk_good(cl->clk)))
+			continue;
+		if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
+			cl->clk->ops->get_rate(cl->clk);
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		}
+	}
+
+	return 0;
+}
+
+/* Exported API */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->ops->get_rate != NULL)
+		return clk->ops->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->ops->round_rate)
+		return clk->ops->round_rate(clk, rate);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static inline int close_enough(long rate1, long rate2)
+{
+	return rate1 && !((rate2 - rate1) * 1000 / rate1);
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
+		goto out;
+
+	else if (!close_enough(clk->rate, rate)) {
+		ret = clk->ops->set_rate(clk, rate);
+		if (ret < 0)
+			goto out;
+		clk->rate = rate;
+		if (clk->flags & RATE_PROPAGATES)
+			propagate_rate(clk);
+	} else
+		ret = 0;
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return -EINVAL;
+
+	if (clk->parent)
+		clk_enable(clk->parent);
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	clk->usage++;
+	if (clk->ops && clk->ops->enable)
+		clk->ops->enable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void local_clk_disable(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	if (clk->usage == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	if (clk->parent)
+		local_clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	if ((--clk->usage) == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	if (clk->parent)
+		clk_disable(clk->parent);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Some additional API */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -ENODEV;
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (!clk->ops->set_parent)
+		goto out;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	ret = clk->ops->set_parent(clk, parent);
+	if (!ret) {
+		/* disable if usage count is 0 */
+		local_clk_disable(parent);
+
+		parent->usage += clk->usage;
+		clk->parent->usage -= clk->usage;
+
+		/* disable if new usage count is 0 */
+		local_clk_disable(clk->parent);
+
+		clk->parent = parent;
+	}
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return NULL;
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+static int __init clk_init(void)
+{
+	struct clk_lookup *cl;
+	struct clk_ops *ops;
+
+	spin_lock_init(&clocks_lock);
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (cl->clk->flags & ENABLED)
+			clk_enable(cl->clk);
+		else
+			local_clk_disable(cl->clk);
+
+		ops = cl->clk->ops;
+
+		if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
+				ops && ops->set_rate)
+			ops->set_rate(cl->clk, cl->clk->rate);
+
+		if (cl->clk->flags & FIXED_RATE) {
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		} else {
+			if (ops && ops->get_rate)
+				ops->get_rate(cl->clk);
+		}
+
+		if (cl->clk->flags & NEEDS_SET_PARENT) {
+			if (ops && ops->set_parent)
+				ops->set_parent(cl->clk, cl->clk->parent);
+		}
+
+		clkdev_add(cl);
+	}
+	return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h
new file mode 100644
index 00000000000..a6611e1a351
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
+#define __ARCH_ARM_STMX3XXX_CLOCK_H__
+
+#ifndef __ASSEMBLER__
+
+struct clk_ops {
+	int (*enable) (struct clk *);
+	int (*disable) (struct clk *);
+	long (*get_rate) (struct clk *);
+	long (*round_rate) (struct clk *, u32);
+	int (*set_rate) (struct clk *, u32);
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+struct clk {
+	struct clk *parent;
+	u32 rate;
+	u32 flags;
+	u8 scale_shift;
+	u8 enable_shift;
+	u8 bypass_shift;
+	u8 busy_bit;
+	s8 usage;
+	int enable_wait;
+	int enable_negate;
+	u32 saved_div;
+	void __iomem *enable_reg;
+	void __iomem *scale_reg;
+	void __iomem *bypass_reg;
+	void __iomem *busy_reg;
+	struct clk_ops *ops;
+};
+
+#endif /* __ASSEMBLER__ */
+
+/* Flags */
+#define RATE_PROPAGATES      (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE      (1<<2)
+#define FIXED_RATE           (1<<3)
+#define ENABLED	             (1<<4)
+#define NEEDS_SET_PARENT     (1<<5)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c
new file mode 100644
index 00000000000..37b8a09148a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/core.c
@@ -0,0 +1,128 @@
+/*
+ * Freescale STMP37XX/STMP378X core routines
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-clkctrl.h>
+
+static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	u32 c;
+	int timeout;
+
+	/* the process of software reset of IP block is done
+	   in several steps:
+
+	   - clear SFTRST and wait for block is enabled;
+	   - clear clock gating (CLKGATE bit);
+	   - set the SFTRST again and wait for block is in reset;
+	   - clear SFTRST and wait for reset completion.
+	*/
+	c = __raw_readl(hwreg);
+	c &= ~(1<<31);		/* clear SFTRST */
+	__raw_writel(c, hwreg);
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<31)) == 0)
+			break;
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when enabling\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	c = __raw_readl(hwreg);
+	c &= ~(1<<30);		/* clear CLKGATE */
+	__raw_writel(c, hwreg);
+
+	if (!just_enable) {
+		c = __raw_readl(hwreg);
+		c |= (1<<31);		/* now again set SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* poll until CLKGATE set */
+			if (__raw_readl(hwreg) & (1<<30))
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when resetting\n",
+					__func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<31);		/* clear SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* still in SFTRST state ? */
+			if ((__raw_readl(hwreg) & (1<<31)) == 0)
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when enabling "
+					"after reset\n", __func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<30);		/* clear CLKGATE */
+		__raw_writel(c, hwreg);
+	}
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<30)) == 0)
+			break;
+
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	int try = 10;
+	int r;
+
+	while (try--) {
+		r = __stmp3xxx_reset_block(hwreg, just_enable);
+		if (!r)
+			break;
+		pr_debug("%s: try %d failed\n", __func__, 10 - try);
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_reset_block);
+
+struct platform_device stmp3xxx_dbguart = {
+	.name = "stmp3xxx-dbguart",
+	.id = -1,
+};
+
+void __init stmp3xxx_init(void)
+{
+	/* Turn off auto-slow and other tricks */
+	stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+
+	stmp3xxx_dma_init();
+}
diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c
new file mode 100644
index 00000000000..68fed4b8746
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/devices.c
@@ -0,0 +1,389 @@
+/*
+* Freescale STMP37XX/STMP378X platform devices
+*
+* Embedded Alley Solutions, Inc <source@embeddedalley.com>
+*
+* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+*/
+
+/*
+* The code contained herein is licensed under the GNU General Public
+* License. You may obtain a copy of the GNU General Public License
+* Version 2 or later at the following locations:
+*
+* http://www.opensource.org/licenses/gpl-license.html
+* http://www.gnu.org/copyleft/gpl.html
+*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-lcdif.h>
+#include <mach/regs-uartapp.h>
+#include <mach/regs-gpmi.h>
+#include <mach/regs-usbctrl.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-rtc.h>
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+static struct resource appuart_resources[] = {
+	{
+		.start = IRQ_UARTAPP_INTERNAL,
+		.end = IRQ_UARTAPP_INTERNAL,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_RX_DMA,
+		.end = IRQ_UARTAPP_RX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_TX_DMA,
+		.end = IRQ_UARTAPP_TX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = REGS_UARTAPP1_PHYS,
+		.end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
+		.flags = IORESOURCE_MEM,
+	}, {
+		/* Rx DMA channel */
+		.start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	}, {
+		/* Tx DMA channel */
+		.start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_appuart = {
+	.name = "stmp3xxx-appuart",
+	.id = 0,
+	.resource = appuart_resources,
+	.num_resources = ARRAY_SIZE(appuart_resources),
+	.dev = {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device stmp3xxx_watchdog = {
+      .name   = "stmp3xxx_wdt",
+      .id     = -1,
+};
+
+static struct resource ts_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_TOUCH_DETECT,
+		.end    = IRQ_TOUCH_DETECT,
+	}, {
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_LRADC_CH5,
+		.end    = IRQ_LRADC_CH5,
+	},
+};
+
+struct platform_device stmp3xxx_touchscreen = {
+	.name		= "stmp3xxx_ts",
+	.id		= -1,
+	.resource	= ts_resource,
+	.num_resources	= ARRAY_SIZE(ts_resource),
+};
+
+/*
+* Keypad device
+*/
+struct platform_device stmp3xxx_keyboard = {
+	.name		= "stmp3xxx-keyboard",
+	.id		= -1,
+};
+
+static struct resource gpmi_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = REGS_GPMI_PHYS,
+		.end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
+	}, {
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_GPMI_DMA,
+		.end = IRQ_GPMI_DMA,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
+		.end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
+	},
+};
+
+struct platform_device stmp3xxx_gpmi = {
+	.name = "gpmi",
+	.id = -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = gpmi_resources,
+	.num_resources = ARRAY_SIZE(gpmi_resources),
+};
+
+static struct resource mmc1_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+	}, {
+		.flags	= IORESOURCE_DMA,
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP_ERROR,
+		.end	= IRQ_SSP_ERROR,
+	},
+};
+
+struct platform_device stmp3xxx_mmc = {
+	.name	= "stmp3xxx-mmc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = mmc1_resource,
+	.num_resources = ARRAY_SIZE(mmc1_resource),
+};
+
+static struct resource usb_resources[] = {
+	{
+		.start	= REGS_USBCTRL_PHYS,
+		.end	= REGS_USBCTRL_PHYS + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_USB_CTRL,
+		.end	= IRQ_USB_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_udc = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource = usb_resources,
+	.num_resources = ARRAY_SIZE(usb_resources),
+};
+
+struct platform_device stmp3xxx_ehci = {
+	.name		= "fsl-ehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= usb_resources,
+	.num_resources	= ARRAY_SIZE(usb_resources),
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start	= REGS_RTC_PHYS,
+		.end	= REGS_RTC_PHYS + REGS_RTC_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_RTC_ALARM,
+		.end	= IRQ_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_RTC_1MSEC,
+		.end	= IRQ_RTC_1MSEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_rtc = {
+	.name		= "stmp3xxx-rtc",
+	.id		= -1,
+	.resource	= rtc_resources,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+};
+
+static struct resource ssp1_resources[] = {
+	{
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource ssp2_resources[] = {
+	{
+		.start	= REGS_SSP2_PHYS,
+		.end	= REGS_SSP2_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP2_DMA,
+		.end	= IRQ_SSP2_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_spi1 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp1_resources,
+	.num_resources = ARRAY_SIZE(ssp1_resources),
+};
+
+struct platform_device stmp3xxx_spi2 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 2,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp2_resources,
+	.num_resources = ARRAY_SIZE(ssp2_resources),
+};
+
+static struct resource fb_resource[] = {
+	{
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_DMA,
+		.end	= IRQ_LCDIF_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_ERROR,
+		.end	= IRQ_LCDIF_ERROR,
+	}, {
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_LCDIF_PHYS,
+		.end	= REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
+	},
+};
+
+struct platform_device stmp3xxx_framebuffer = {
+	.name		= "stmp3xxx-fb",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(fb_resource),
+	.resource	= fb_resource,
+};
+
+#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2)			\
+	static char *cmdline_device_##name;			\
+	static int cmdline_device_##name##_setup(char *dev)	\
+	{							\
+		cmdline_device_##name = dev + 1;		\
+		return 0;					\
+	}							\
+	__setup(#name, cmdline_device_##name##_setup);		\
+	int stmp3xxx_##name##_device_register(void)		\
+	{							\
+		struct platform_device *d = NULL;		\
+		if (!cmdline_device_##name ||			\
+			!strcmp(cmdline_device_##name, #dev1))	\
+				d = &stmp3xxx_##dev1;		\
+		else if (!strcmp(cmdline_device_##name, #dev2))	\
+				d = &stmp3xxx_##dev2;		\
+		else						\
+			printk(KERN_ERR"Unknown %s assignment '%s'.\n",	\
+				#name, cmdline_device_##name);	\
+		return d ? platform_device_register(d) : -ENOENT;	\
+	}
+
+CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
+CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
+
+struct platform_device stmp3xxx_backlight = {
+	.name		= "stmp3xxx-bl",
+	.id		= -1,
+};
+
+struct platform_device stmp3xxx_rotdec = {
+	.name	= "stmp3xxx-rotdec",
+	.id	= -1,
+};
+
+struct platform_device stmp3xxx_persistent = {
+	.name			= "stmp3xxx-persistent",
+	.id			= -1,
+};
+
+struct platform_device stmp3xxx_dcp_bootstream = {
+	.name			= "stmp3xxx-dcpboot",
+	.id			= -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dcp_resources[] = {
+	{
+		.start = IRQ_DCP_VMI,
+		.end = IRQ_DCP_VMI,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DCP,
+		.end = IRQ_DCP,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_dcp = {
+	.name			= "stmp3xxx-dcp",
+	.id			= -1,
+	.resource		= dcp_resources,
+	.num_resources		= ARRAY_SIZE(dcp_resources),
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource battery_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_VDD5V,
+		.end    = IRQ_VDD5V,
+	},
+};
+
+struct platform_device stmp3xxx_battery = {
+	.name   = "stmp3xxx-battery",
+	.resource = battery_resource,
+	.num_resources = ARRAY_SIZE(battery_resource),
+};
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
new file mode 100644
index 00000000000..d2f497764dc
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -0,0 +1,463 @@
+/*
+ * DMA helper routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: dmitry pervushin <dpervushin@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/cpufreq.h>
+
+#include <asm/page.h>
+
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-apbh.h>
+
+static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
+static const size_t pool_alignment = 8;
+static struct stmp3xxx_dma_user {
+	void *pool;
+	int inuse;
+	const char *name;
+} channels[MAX_DMA_CHANNELS];
+
+#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
+#define IS_USED(ch) (channels[ch].inuse)
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
+{
+	struct stmp3xxx_dma_user *user;
+	int err = 0;
+
+	user = channels + ch;
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	/* Create a pool to allocate dma commands from */
+	user->pool = dma_pool_create(name, dev, pool_item_size,
+				     pool_alignment, PAGE_SIZE);
+	if (user->pool == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+	user->name = name;
+	user->inuse++;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_request);
+
+int stmp3xxx_dma_release(int ch)
+{
+	struct stmp3xxx_dma_user *user = channels + ch;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	BUG_ON(user->pool == NULL);
+	dma_pool_destroy(user->pool);
+	user->inuse--;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_release);
+
+int stmp3xxx_dma_read_semaphore(int channel)
+{
+	int sem = -1;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBH_CHn_SEMA_PHORE;
+		sem >>= BP_APBH_CHn_SEMA_PHORE;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBX_CHn_SEMA_PHORE;
+		sem >>= BP_APBX_CHn_SEMA_PHORE;
+		break;
+	default:
+		BUG();
+	}
+	return sem;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
+
+int stmp3xxx_dma_allocate_command(int channel,
+				  struct stmp3xxx_dma_descriptor *descriptor)
+{
+	struct stmp3xxx_dma_user *user = channels + channel;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+	if (descriptor == NULL) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* Allocate memory for a command from the buffer */
+	descriptor->command =
+	    dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
+
+	/* Check it worked */
+	if (!descriptor->command) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	memset(descriptor->command, 0, pool_item_size);
+out:
+	WARN_ON(err);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
+
+int stmp3xxx_dma_free_command(int channel,
+			      struct stmp3xxx_dma_descriptor *descriptor)
+{
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	/* Return the command memory to the pool */
+	dma_pool_free(channels[channel].pool, descriptor->command,
+		      descriptor->handle);
+
+	/* Initialise descriptor so we're not tempted to use it */
+	descriptor->command = NULL;
+	descriptor->handle = 0;
+	descriptor->virtual_buf_ptr = NULL;
+	descriptor->next_descr = NULL;
+
+	WARN_ON(err);
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_command);
+
+void stmp3xxx_dma_go(int channel,
+		     struct stmp3xxx_dma_descriptor *head, u32 semaphore)
+{
+	int ch = STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c, *s;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
+		break;
+
+	default:
+		return;
+	}
+
+	/* Set next command */
+	__raw_writel(head->handle, c);
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	__raw_writel(semaphore, s);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_go);
+
+int stmp3xxx_dma_running(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBH_CHn_SEMA_PHORE;
+
+	case STMP3XXX_BUS_APBX:
+		return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBX_CHn_SEMA_PHORE;
+	default:
+		BUG();
+		return 0;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_dma_running);
+
+/*
+ * Circular dma chain management
+ */
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	int i;
+
+	for (i = 0; i < chain->total_count; i++)
+		stmp3xxx_dma_free_command(
+			STMP3XXX_DMA(chain->channel, chain->bus),
+			&chain->chain[i]);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
+
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items)
+{
+	int i;
+	int err = 0;
+
+	if (items == 0)
+		return err;
+
+	for (i = 0; i < items; i++) {
+		err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
+		if (err) {
+			WARN_ON(err);
+			/*
+			 * Couldn't allocate the whole chain.
+			 * deallocate what has been allocated
+			 */
+			if (i) {
+				do {
+					stmp3xxx_dma_free_command(ch,
+								  &descriptors
+								  [i]);
+				} while (i-- >= 0);
+			}
+			return err;
+		}
+
+		/* link them! */
+		if (i > 0) {
+			descriptors[i - 1].next_descr = &descriptors[i];
+			descriptors[i - 1].command->next =
+						descriptors[i].handle;
+		}
+	}
+
+	/* make list circular */
+	descriptors[items - 1].next_descr = &descriptors[0];
+	descriptors[items - 1].command->next = descriptors[0].handle;
+
+	chain->total_count = items;
+	chain->chain = descriptors;
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = items;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+	chain->bus = STMP3XXX_DMA_BUS(ch);
+	chain->channel = STMP3XXX_DMA_CHANNEL(ch);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
+
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = chain->total_count;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+}
+EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
+
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	BUG_ON(chain->cooked_count < count);
+
+	chain->cooked_count -= count;
+	chain->cooked_index += count;
+	chain->cooked_index %= chain->total_count;
+	chain->free_count += count;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_free);
+
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	void __iomem *c;
+	u32 mask_clr, mask;
+	BUG_ON(chain->free_count < count);
+
+	chain->free_count -= count;
+	chain->free_index += count;
+	chain->free_index %= chain->total_count;
+	chain->active_count += count;
+
+	switch (chain->bus) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	stmp3xxx_clearl(mask_clr, c);
+	stmp3xxx_setl(mask, c);
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_active);
+
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
+{
+	unsigned cooked;
+
+	cooked = chain->active_count -
+	  stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
+
+	chain->active_count -= cooked;
+	chain->active_index += cooked;
+	chain->active_index %= chain->total_count;
+
+	chain->cooked_count += cooked;
+
+	return cooked;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
+
+void stmp3xxx_dma_set_alt_target(int channel, int function)
+{
+#if defined(CONFIG_ARCH_STMP37XX)
+	unsigned bits = 4;
+#elif defined(CONFIG_ARCH_STMP378X)
+	unsigned bits = 2;
+#else
+#error wrong arch
+#endif
+	int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
+	unsigned mask = (1<<bits) - 1;
+	void __iomem *c;
+
+	BUG_ON(function < 0 || function >= (1<<bits));
+	pr_debug("%s: channel = %d, using mask %x, "
+		 "shift = %d\n", __func__, channel, mask, shift);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_DEVSEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_DEVSEL;
+		break;
+	default:
+		BUG();
+	}
+	stmp3xxx_clearl(mask << shift, c);
+	stmp3xxx_setl(mask << shift, c);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
+
+void stmp3xxx_dma_suspend(void)
+{
+	stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+void stmp3xxx_dma_resume(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+struct dma_notifier_block {
+	struct notifier_block nb;
+	void *data;
+};
+
+static int dma_cpufreq_notifier(struct notifier_block *self,
+				unsigned long phase, void *p)
+{
+	switch (phase) {
+	case CPUFREQ_POSTCHANGE:
+		stmp3xxx_dma_resume();
+		break;
+
+	case CPUFREQ_PRECHANGE:
+		stmp3xxx_dma_suspend();
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct dma_notifier_block dma_cpufreq_nb = {
+	.nb = {
+		.notifier_call = dma_cpufreq_notifier,
+	},
+};
+#endif /* CONFIG_CPU_FREQ */
+
+void __init stmp3xxx_dma_init(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+#ifdef CONFIG_CPU_FREQ
+	cpufreq_register_notifier(&dma_cpufreq_nb.nb,
+				CPUFREQ_TRANSITION_NOTIFIER);
+#endif /* CONFIG_CPU_FREQ */
+}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
new file mode 100644
index 00000000000..f9c39772d7c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
new file mode 100644
index 00000000000..b4e205b95f2
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * Freescale STMP37XX/STMP378X CPU type detection
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_CPU_H
+#define __ASM_PLAT_CPU_H
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define cpu_is_stmp37xx()	(1)
+#else
+#define cpu_is_stmp37xx()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define cpu_is_stmp378x()	(1)
+#else
+#define cpu_is_stmp378x()	(0)
+#endif
+
+#endif /* __ASM_PLAT_CPU_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..fb3b969bf0a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/*
+ * Debugging macro include header
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		addeq	\rx, \rx, #0x00070000
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x00070000
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #0]		@ data register at 0
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h
new file mode 100644
index 00000000000..7c58557c676
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h
@@ -0,0 +1,153 @@
+/*
+ * Freescale STMP37XX/STMP378X DMA helper interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_DMA_H
+#define __ASM_PLAT_STMP3XXX_DMA_H
+
+#include <linux/platform_device.h>
+#include <linux/dmapool.h>
+
+#if !defined(MAX_PIO_WORDS)
+#define MAX_PIO_WORDS   (15)
+#endif
+
+#define STMP3XXX_BUS_APBH		0
+#define STMP3XXX_BUS_APBX		1
+#define STMP3XXX_DMA_MAX_CHANNEL	16
+#define STMP3XXX_DMA_BUS(dma)		((dma) / 16)
+#define STMP3XXX_DMA_CHANNEL(dma)	((dma) % 16)
+#define STMP3XXX_DMA(channel, bus)	((bus) * 16 + (channel))
+#define MAX_DMA_ADDRESS			0xffffffff
+#define MAX_DMA_CHANNELS		32
+
+struct stmp3xxx_dma_command {
+	u32 next;
+	u32 cmd;
+	union {
+		u32 buf_ptr;
+		u32 alternate;
+	};
+	u32 pio_words[MAX_PIO_WORDS];
+};
+
+struct stmp3xxx_dma_descriptor {
+	struct stmp3xxx_dma_command *command;
+	dma_addr_t handle;
+
+	/* The virtual address of the buffer pointer */
+	void *virtual_buf_ptr;
+	/* The next descriptor in a the DMA chain (optional) */
+	struct stmp3xxx_dma_descriptor *next_descr;
+};
+
+struct stmp37xx_circ_dma_chain {
+	unsigned total_count;
+	struct stmp3xxx_dma_descriptor *chain;
+
+	unsigned free_index;
+	unsigned free_count;
+	unsigned active_index;
+	unsigned active_count;
+	unsigned cooked_index;
+	unsigned cooked_count;
+
+	int bus;
+	unsigned channel;
+};
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->free_index]);
+}
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->cooked_index]);
+}
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
+int stmp3xxx_dma_release(int ch);
+int stmp3xxx_dma_allocate_command(int ch,
+				  struct stmp3xxx_dma_descriptor *descriptor);
+int stmp3xxx_dma_free_command(int ch,
+			      struct stmp3xxx_dma_descriptor *descriptor);
+void stmp3xxx_dma_continue(int channel, u32 semaphore);
+void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
+		     u32 semaphore);
+int stmp3xxx_dma_running(int ch);
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items);
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
+int stmp3xxx_dma_read_semaphore(int ch);
+void stmp3xxx_dma_init(void);
+void stmp3xxx_dma_set_alt_target(int ch, int target);
+void stmp3xxx_dma_suspend(void);
+void stmp3xxx_dma_resume(void);
+
+/*
+ * STMP37xx and STMP378x have different DMA control
+ * registers layout
+ */
+
+void stmp3xxx_arch_dma_freeze(int ch);
+void stmp3xxx_arch_dma_unfreeze(int ch);
+void stmp3xxx_arch_dma_reset_channel(int ch);
+void stmp3xxx_arch_dma_enable_interrupt(int ch);
+void stmp3xxx_arch_dma_clear_interrupt(int ch);
+int stmp3xxx_arch_dma_is_interrupt(int ch);
+
+static inline void stmp3xxx_dma_reset_channel(int ch)
+{
+	stmp3xxx_arch_dma_reset_channel(ch);
+}
+
+
+static inline void stmp3xxx_dma_freeze(int ch)
+{
+	stmp3xxx_arch_dma_freeze(ch);
+}
+
+static inline void stmp3xxx_dma_unfreeze(int ch)
+{
+	stmp3xxx_arch_dma_unfreeze(ch);
+}
+
+static inline void stmp3xxx_dma_enable_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_enable_interrupt(ch);
+}
+
+static inline void stmp3xxx_dma_clear_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_clear_interrupt(ch);
+}
+
+static inline int stmp3xxx_dma_is_interrupt(int ch)
+{
+	return stmp3xxx_arch_dma_is_interrupt(ch);
+}
+
+#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
new file mode 100644
index 00000000000..a8b57925617
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * Freescale STMP37XX/STMP378X GPIO interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#define ARCH_NR_GPIOS	(32 * 3)
+#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
+#define gpio_get_value(gpio) __gpio_get_value(gpio)
+#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
new file mode 100644
index 00000000000..e166432910a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
@@ -0,0 +1,12 @@
+#ifndef __MACH_GPMI_H
+
+#include <linux/mtd/partitions.h>
+#include <mach/regs-gpmi.h>
+
+struct gpmi_platform_data {
+	void *pins;
+	int nr_parts;
+	struct mtd_partition *parts;
+	const char *part_types[];
+};
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
new file mode 100644
index 00000000000..47b8978405b
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * This file contains the hardware definitions of the Freescale STMP3XXX
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 /* VA of IO  */
+#define IO_SIZE			0x00100000                 /* How much? */
+#define IO_START		0x80000000                 /* PA of IO  */
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h
new file mode 100644
index 00000000000..d08b1b7f3d1
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) 	__typesafe_io(a)
+#define __mem_pci(a)	(a)
+#define __mem_isa(a)	(a)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h
new file mode 100644
index 00000000000..7b875a07a1a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
new file mode 100644
index 00000000000..ba81e154376
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
@@ -0,0 +1,14 @@
+#ifndef _MACH_MMC_H
+#define _MACH_MMC_H
+
+#include <mach/regs-ssp.h>
+
+struct stmp3xxxmmc_platform_data {
+	int (*get_wp)(void);
+	unsigned long (*setclock)(void __iomem *base, unsigned long);
+	void (*cmd_pullup)(int);
+	int  (*hw_init)(void);
+	void (*hw_release)(void);
+};
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
new file mode 100644
index 00000000000..cc5af82279a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
@@ -0,0 +1,157 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __PINMUX_H
+#define __PINMUX_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Pin definitions */
+#include "pins.h"
+#include <mach/pins.h>
+
+/*
+ * Each pin may be routed up to four different HW interfaces
+ * including GPIO
+ */
+enum pin_fun {
+	PIN_FUN1 = 0,
+	PIN_FUN2,
+	PIN_FUN3,
+	PIN_GPIO,
+};
+
+/*
+ * Each pin may have different output drive strength in range from
+ * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
+ */
+enum pin_strength {
+	PIN_4MA = 0,
+	PIN_8MA,
+	PIN_12MA,
+	PIN_16MA,
+	PIN_20MA,
+};
+
+/*
+ * Each pin can be programmed for 1.8V or 3.3V
+ */
+enum pin_voltage {
+	PIN_1_8V = 0,
+	PIN_3_3V,
+};
+
+/*
+ * Structure to define a group of pins and their parameters
+ */
+struct pin_desc {
+	unsigned id;
+	enum pin_fun fun;
+	enum pin_strength strength;
+	enum pin_voltage voltage;
+	unsigned pullup:1;
+};
+
+struct pin_group {
+	struct pin_desc *pins;
+	int nr_pins;
+};
+
+/* Set pin drive strength */
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+			   const char *label);
+
+/* Set pin voltage */
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			   const char *label);
+
+/* Enable pull-up resistor for a pin */
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
+
+/*
+ * Request a pin ownership, only one module (identified by @label)
+ * may own a pin.
+ */
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
+
+/* Release pin */
+void stmp3xxx_release_pin(unsigned id, const char *label);
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
+
+/*
+ * Each bank is associated with a number of registers to control
+ * pin function, drive strength, voltage and pull-up reigster. The
+ * number of registers of a given type depends on the number of bits
+ * describin particular pin.
+ */
+#define HW_MUXSEL_NUM		2	/* registers per bank */
+#define HW_MUXSEL_PIN_LEN	2	/* bits per pin */
+#define HW_MUXSEL_PIN_NUM	16	/* pins per register */
+#define HW_MUXSEL_PINFUN_MASK	0x3	/* pin function mask */
+#define HW_MUXSEL_PINFUN_NUM	4	/* four options for a pin */
+
+#define HW_DRIVE_NUM		4	/* registers per bank */
+#define HW_DRIVE_PIN_LEN	4	/* bits per pin */
+#define HW_DRIVE_PIN_NUM	8	/* pins per register */
+#define HW_DRIVE_PINDRV_MASK	0x3	/* pin strength mask - 2 bits */
+#define HW_DRIVE_PINDRV_NUM	5	/* five possible strength values */
+#define HW_DRIVE_PINV_MASK	0x4	/* pin voltage mask - 1 bit */
+
+
+struct stmp3xxx_pinmux_bank {
+	struct gpio_chip chip;
+
+	/* Pins allocation map */
+	unsigned long pin_map;
+
+	/* Pin owner names */
+	const char *pin_labels[32];
+
+	/* Bank registers */
+	void __iomem *hw_muxsel[HW_MUXSEL_NUM];
+	void __iomem *hw_drive[HW_DRIVE_NUM];
+	void __iomem *hw_pull;
+
+	void __iomem *pin2irq,
+		*irqlevel,
+		*irqpolarity,
+		*irqen,
+		*irqstat;
+
+	/* HW MUXSEL register function bit values */
+	u8 functions[HW_MUXSEL_PINFUN_NUM];
+
+	/*
+	 * HW DRIVE register strength bit values:
+	 * 0xff - requested strength is not supported for this bank
+	 */
+	u8 strengths[HW_DRIVE_PINDRV_NUM];
+
+	/* GPIO things */
+	void __iomem *hw_gpio_in,
+		     *hw_gpio_out,
+		     *hw_gpio_doe;
+	int irq, virq;
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start);
+
+#endif /* __PINMUX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h
new file mode 100644
index 00000000000..c573318e1ca
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PINS_H
+#define __ASM_PLAT_PINS_H
+
+#define STMP3XXX_PINID(bank, pin)	(bank * 32 + pin)
+#define STMP3XXX_PINID_TO_BANK(pinid)	(pinid / 32)
+#define STMP3XXX_PINID_TO_PINNUM(pinid)	(pinid % 32)
+
+/*
+ * Special invalid pin identificator to show a pin doesn't exist
+ */
+#define PINID_NO_PIN	STMP3XXX_PINID(0xFF, 0xFF)
+
+#endif /* __ASM_PLAT_PINS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h
new file mode 100644
index 00000000000..7007ddaa91e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PLATFORM_H
+#define __ASM_PLAT_PLATFORM_H
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/sizes.h>
+
+/* Virtual address where registers are mapped */
+#define STMP3XXX_REGS_PHBASE	0x80000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_REGS_BASE	0xF0000000
+#else
+#define STMP3XXX_REGS_BASE	(void __iomem *)0xF0000000
+#endif
+#define STMP3XXX_REGS_SIZE	SZ_1M
+
+/* Virtual address where OCRAM is mapped */
+#define STMP3XXX_OCRAM_PHBASE	0x00000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_OCRAM_BASE	0xf1000000
+#else
+#define STMP3XXX_OCRAM_BASE	(void __iomem *)0xf1000000
+#endif
+#define STMP3XXX_OCRAM_SIZE	(32 * SZ_1K)
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_PRIORITYn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_PRIORITYn_WR
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_INTERRUPTn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_INTERRUPTn_WR
+#endif
+
+#define HW_STMP3XXX_SET		0x04
+#define HW_STMP3XXX_CLR		0x08
+#define HW_STMP3XXX_TOG		0x0c
+
+#ifndef __ASSEMBLER__
+static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_CLR);
+}
+
+static inline void stmp3xxx_setl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_SET);
+}
+#endif
+
+#define BF(value, field) (((value) << BP_##field) & BM_##field)
+
+#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
new file mode 100644
index 00000000000..2e300feaa4c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
@@ -0,0 +1,54 @@
+/*
+ * Freescale STMP37XX/STMP378X core structure and function declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_H
+#define __ASM_PLAT_STMP3XXX_H
+
+#include <linux/irq.h>
+
+extern struct sys_timer stmp3xxx_timer;
+
+void stmp3xxx_init_irq(struct irq_chip *chip);
+void stmp3xxx_init(void);
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
+extern struct platform_device stmp3xxx_dbguart,
+			      stmp3xxx_appuart,
+			      stmp3xxx_watchdog,
+			      stmp3xxx_touchscreen,
+			      stmp3xxx_keyboard,
+			      stmp3xxx_gpmi,
+			      stmp3xxx_mmc,
+			      stmp3xxx_udc,
+			      stmp3xxx_ehci,
+			      stmp3xxx_rtc,
+			      stmp3xxx_spi1,
+			      stmp3xxx_spi2,
+			      stmp3xxx_backlight,
+			      stmp3xxx_rotdec,
+			      stmp3xxx_dcp,
+			      stmp3xxx_dcp_bootstream,
+			      stmp3xxx_persistent,
+			      stmp3xxx_framebuffer,
+			      stmp3xxx_battery;
+int stmp3xxx_ssp1_device_register(void);
+int stmp3xxx_ssp2_device_register(void);
+
+struct pin_group;
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
+
+#endif /* __ASM_PLAT_STMP3XXX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h
new file mode 100644
index 00000000000..28a98888931
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+#include <mach/regs-power.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* Set BATTCHRG to default value */
+	__raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
+
+	/* Set MINPWR to default value   */
+	__raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
+
+	/* Reset digital side of chip (but not power or RTC) */
+	__raw_writel(BM_CLKCTRL_RESET_DIG,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
+
+	/* Should not return */
+}
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h
new file mode 100644
index 00000000000..3373985d7a8
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * System time clock is sourced from the 32k clock
+ */
+#define CLOCK_TICK_RATE		(32768)
diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
new file mode 100644
index 00000000000..f79f5ee56cd
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+/*
+ * Register includes are for when the MMU enabled; we need to define our
+ * own stuff here for pre-MMU use
+ */
+#define UARTDBG_BASE		0x80070000
+#define UART(c)			(((volatile unsigned *)UARTDBG_BASE)[c])
+
+/*
+ * This does not append a newline
+ */
+static void putc(char c)
+{
+	/* Wait for TX fifo empty */
+	while ((UART(6) & (1<<7)) == 0)
+		continue;
+
+	/* Write byte */
+	UART(0) = c;
+
+	/* Wait for last bit to exit the UART */
+	while (UART(6) & (1<<3))
+		continue;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..541b880c186
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define VMALLOC_END       (0xF0000000)
diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c
new file mode 100644
index 00000000000..20de4e0401e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/irq.c
@@ -0,0 +1,51 @@
+/*
+ * Freescale STMP37XX/STMP378X common interrupt handling code
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+
+void __init stmp3xxx_init_irq(struct irq_chip *chip)
+{
+	unsigned int i, lv;
+
+	/* Reset the interrupt controller */
+	stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
+
+	/* Disable all interrupts initially */
+	for (i = 0; i < NR_REAL_IRQS; i++) {
+		chip->mask(i);
+		set_irq_chip(i, chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Ensure vector is cleared */
+	for (lv = 0; lv < 4; lv++)
+		__raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
new file mode 100644
index 00000000000..d4120038220
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -0,0 +1,552 @@
+/*
+ * Freescale STMP378X/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sysdev.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/regs-pinctrl.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+
+#define NR_BANKS ARRAY_SIZE(pinmux_banks)
+static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
+	[0] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
+		.irq = IRQ_GPIO0,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
+	},
+	[1] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
+		.irq = IRQ_GPIO1,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
+	},
+	[2] = {
+	       .hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
+		.irq = IRQ_GPIO2,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
+	},
+	[3] = {
+	       .hw_muxsel = {
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
+	       },
+	       .hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
+			NULL,
+	       },
+	       .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
+	       .functions = {0x0, 0x1, 0x2, 0x3},
+	       .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
+	},
+};
+
+static inline struct stmp3xxx_pinmux_bank *
+stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
+{
+	unsigned b, p;
+
+	b = STMP3XXX_PINID_TO_BANK(id);
+	p = STMP3XXX_PINID_TO_PINNUM(id);
+	BUG_ON(b >= NR_BANKS);
+	if (bank)
+		*bank = b;
+	if (pin)
+		*pin = p;
+	return &pinmux_banks[b];
+}
+
+/* Check if requested pin is owned by caller */
+static int stmp3xxx_check_pin(unsigned id, const char *label)
+{
+	unsigned pin;
+	struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
+
+	if (!test_bit(pin, &pm->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: Accessing free pin %x, caller %s\n",
+		       __func__, id, label);
+
+		return -EINVAL;
+	}
+
+	if (label && pm->pin_labels[pin] &&
+	    strcmp(label, pm->pin_labels[pin])) {
+		printk(KERN_WARNING
+		       "%s: Wrong pin owner %x, caller %s owner %s\n",
+		       __func__, id, label, pm->pin_labels[pin]);
+
+		return -EINVAL;
+	}
+	return 0;
+}
+
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+		const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
+		 bank, pin, strength);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+	val = pbank->strengths[strength];
+	if (val == 0xff) {
+		printk(KERN_WARNING
+		       "%s: strength is not supported for bank %d, caller %s",
+		       __func__, bank, label);
+		return;
+	}
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
+			val << shift, hwdrive);
+	stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
+	stmp3xxx_setl(val << shift, hwdrive);
+}
+
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			  const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
+		 bank, pin, voltage);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
+	if (voltage == PIN_1_8V)
+		stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+	else
+		stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+}
+
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwpull;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
+		 bank, pin, enable);
+
+	hwpull = pbank->hw_pull;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, 1 << pin, hwpull);
+	if (enable)
+		stmp3xxx_setl(1 << pin, hwpull);
+	else
+		stmp3xxx_clearl(1 << pin, hwpull);
+}
+
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+	int ret = 0;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
+		 bank, pin, fun);
+
+	if (test_bit(pin, &pbank->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
+		       __func__, bank, pin, label, pbank->pin_labels[pin]);
+		return -EBUSY;
+	}
+
+	set_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = label;
+
+	stmp3xxx_set_pin_type(id, fun);
+
+	return ret;
+}
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwmux;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+
+	hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+
+	val = pbank->functions[fun];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+	pr_debug("%s: writing 0x%x to 0x%p register\n",
+			__func__, val << shift, hwmux);
+	stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
+	stmp3xxx_setl(val << shift, hwmux);
+}
+
+void stmp3xxx_release_pin(unsigned id, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	clear_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = NULL;
+}
+
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+	int err = 0;
+
+	/* Allocate and configure pins */
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pr_debug("%s: #%d\n", __func__, p);
+		pin = &pin_group->pins[p];
+
+		err = stmp3xxx_request_pin(pin->id, pin->fun, label);
+		if (err)
+			goto out_err;
+
+		stmp3xxx_pin_strength(pin->id, pin->strength, label);
+		stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
+		stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
+	}
+
+	return 0;
+
+out_err:
+	/* Release allocated pins in case of error */
+	while (--p >= 0) {
+		pr_debug("%s: releasing #%d\n", __func__, p);
+		stmp3xxx_release_pin(pin_group->pins[p].id, label);
+	}
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_request_pin_group);
+
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pin = &pin_group->pins[p];
+		stmp3xxx_release_pin(pin->id, label);
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_release_pin_group);
+
+static int stmp3xxx_irq_to_gpio(int irq,
+	struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+
+	for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
+		if (pm->virq <= irq && irq < pm->virq + 32) {
+			*bank = pm;
+			*gpio = irq - pm->virq;
+			return 0;
+		}
+	return -ENOENT;
+}
+
+static int stmp3xxx_set_irqtype(unsigned irq, unsigned type)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+	int l, p;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		l = 0; p = 1; break;
+	case IRQ_TYPE_EDGE_FALLING:
+		l = 0; p = 0; break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		l = 1; p = 1; break;
+	case IRQ_TYPE_LEVEL_LOW:
+		l = 1; p = 0; break;
+	default:
+		pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
+				__func__, type);
+		return -ENXIO;
+	}
+
+	if (l)
+		stmp3xxx_setl(1 << gpio, pm->irqlevel);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqlevel);
+	if (p)
+		stmp3xxx_setl(1 << gpio, pm->irqpolarity);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
+	return 0;
+}
+
+static void stmp3xxx_pin_ack_irq(unsigned irq)
+{
+	u32 stat;
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stat = __raw_readl(pm->irqstat) & (1 << gpio);
+	stmp3xxx_clearl(stat, pm->irqstat);
+}
+
+static void stmp3xxx_pin_mask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_clearl(1 << gpio, pm->irqen);
+	stmp3xxx_clearl(1 << gpio, pm->pin2irq);
+}
+
+static void stmp3xxx_pin_unmask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_setl(1 << gpio, pm->irqen);
+	stmp3xxx_setl(1 << gpio, pm->pin2irq);
+}
+
+static inline
+struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
+{
+	return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
+}
+
+static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	return pm->virq + offset;
+}
+
+static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	unsigned v;
+
+	v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
+	return v ? 1 : 0;
+}
+
+static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	if (v)
+		stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
+	else
+		stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
+}
+
+static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
+	stmp3xxx_gpio_set(chip, offset, v);
+	return 0;
+}
+
+static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
+	return 0;
+}
+
+static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
+}
+
+static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	stmp3xxx_release_pin(chip->base + offset, "gpio");
+}
+
+static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
+{
+	struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq);
+	int gpio_irq = pm->virq;
+	u32 stat = __raw_readl(pm->irqstat);
+
+	while (stat) {
+		if (stat & 1)
+			irq_desc[gpio_irq].handle_irq(gpio_irq,
+				&irq_desc[gpio_irq]);
+		gpio_irq++;
+		stat >>= 1;
+	}
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.ack	= stmp3xxx_pin_ack_irq,
+	.mask	= stmp3xxx_pin_mask_irq,
+	.unmask	= stmp3xxx_pin_unmask_irq,
+	.set_type = stmp3xxx_set_irqtype,
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start)
+{
+	int b, r = 0;
+	struct stmp3xxx_pinmux_bank *pm;
+	int virq;
+
+	for (b = 0; b < 3; b++) {
+		/* only banks 0,1,2 are allowed to GPIO */
+		pm = pinmux_banks + b;
+		pm->chip.base = 32 * b;
+		pm->chip.ngpio = 32;
+		pm->chip.owner = THIS_MODULE;
+		pm->chip.can_sleep = 1;
+		pm->chip.exported = 1;
+		pm->chip.to_irq = stmp3xxx_gpio_to_irq;
+		pm->chip.direction_input = stmp3xxx_gpio_input;
+		pm->chip.direction_output = stmp3xxx_gpio_output;
+		pm->chip.get = stmp3xxx_gpio_get;
+		pm->chip.set = stmp3xxx_gpio_set;
+		pm->chip.request = stmp3xxx_gpio_request;
+		pm->chip.free = stmp3xxx_gpio_free;
+		pm->virq = virtual_irq_start + b * 32;
+
+		for (virq = pm->virq; virq < pm->virq; virq++) {
+			gpio_irq_chip.mask(virq);
+			set_irq_chip(virq, &gpio_irq_chip);
+			set_irq_handler(virq, handle_level_irq);
+			set_irq_flags(virq, IRQF_VALID);
+		}
+		r = gpiochip_add(&pm->chip);
+		if (r < 0)
+			break;
+		set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq);
+		set_irq_data(pm->irq, pm);
+	}
+	return r;
+}
+
+MODULE_AUTHOR("Vladislav Buzov");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
new file mode 100644
index 00000000000..063c7bc0e74
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -0,0 +1,189 @@
+/*
+ * System timer for Freescale STMP37XX/STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/time.h>
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-timrot.h>
+
+static irqreturn_t
+stmp3xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* timer 0 */
+	if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
+			BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+		c->event_handler(c);
+	}
+
+	/* timer 1 */
+	else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
+			& BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
+{
+	return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
+				& 0xFFFF0000) >> 16);
+}
+
+static int
+stmp3xxx_timrot_set_next_event(unsigned long delta,
+		struct clock_event_device *dev)
+{
+	/* reload the timer */
+	__raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	return 0;
+}
+
+static void
+stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ckevt_timrot = {
+	.name		= "timrot",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= stmp3xxx_timrot_set_next_event,
+	.set_mode	= stmp3xxx_timrot_set_mode,
+};
+
+static struct clocksource cksrc_stmp3xxx = {
+	.name           = "cksrc_stmp3xxx",
+	.rating         = 250,
+	.read           = stmp3xxx_clock_read,
+	.mask           = CLOCKSOURCE_MASK(16),
+	.shift          = 10,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction stmp3xxx_timer_irq = {
+	.name		= "stmp3xxx_timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= stmp3xxx_timer_interrupt,
+	.dev_id		= &ckevt_timrot,
+};
+
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init stmp3xxx_init_timer(void)
+{
+	cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
+				cksrc_stmp3xxx.shift);
+	ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+				ckevt_timrot.shift);
+	ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
+	ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
+	ckevt_timrot.cpumask = cpumask_of(0);
+
+	stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
+
+	/* clear two timers */
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	/* configure them */
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
+
+	clocksource_register(&cksrc_stmp3xxx);
+	clockevents_register_device(&ckevt_timrot);
+}
+
+#ifdef CONFIG_PM
+
+void stmp3xxx_suspend_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+}
+
+void stmp3xxx_resume_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+}
+
+#else
+
+#define stmp3xxx_suspend_timer	NULL
+#define	stmp3xxx_resume_timer	NULL
+
+#endif	/* CONFIG_PM */
+
+struct sys_timer stmp3xxx_timer = {
+	.init		= stmp3xxx_init_timer,
+	.suspend	= stmp3xxx_suspend_timer,
+	.resume		= stmp3xxx_resume_timer,
+};
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 83c4e384b16..1aeae38725d 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -100,6 +100,7 @@ ENTRY(vfp_support_entry)
 	beq	no_old_VFP_process
 	VFPFSTMIA r4, r5		@ save the working registers
 	VFPFMRX	r5, FPSCR		@ current status
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to save?
 	beq	1f
 	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
@@ -107,6 +108,7 @@ ENTRY(vfp_support_entry)
 	beq	1f
 	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
 1:
+#endif
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
@@ -119,6 +121,7 @@ no_old_VFP_process:
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
 	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to restore?
 	beq	1f
 	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
@@ -126,6 +129,7 @@ no_old_VFP_process:
 	beq	1f
 	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
 1:
+#endif
 	VFPFMXR	FPSCR, r5		@ restore status
 
 check_for_exception:
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 01599c4ef72..2d7423af119 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	}
 
 	if (fpexc & FPEXC_EX) {
+#ifndef CONFIG_CPU_FEROCEON
 		/*
 		 * Asynchronous exception. The instruction is read from FPINST
 		 * and the interrupted instruction has to be restarted.
 		 */
 		trigger = fmrx(FPINST);
 		regs->ARM_pc -= 4;
+#endif
 	} else if (!(fpexc & FPEXC_DEX)) {
 		/*
 		 * Illegal combination of bits. It can be caused by an
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
index b3f99477bbe..be27a0218ab 100644
--- a/arch/avr32/boards/atngw100/Kconfig
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -2,8 +2,15 @@
 
 if BOARD_ATNGW100
 
+choice
+	prompt "Select an NGW100 add-on board to support"
+	default BOARD_ATNGW100_ADDON_NONE
+
+config BOARD_ATNGW100_ADDON_NONE
+	bool "None"
+
 config BOARD_ATNGW100_EVKLCD10X
-	bool "Add support for EVKLCD10X addon board"
+	bool "EVKLCD10X addon board"
 	help
 	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
 	  addon board for the NGW100. By enabling this the LCD controller and
@@ -14,7 +21,19 @@ config BOARD_ATNGW100_EVKLCD10X
 	  The MCI pins can be reenabled by editing the "add device function" but
 	  this may break the setup for other displays that use these pins.
 
-	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
+config BOARD_ATNGW100_MRMT
+	bool "Mediama RMT1/2 add-on board"
+	help
+	  This enables support for the Mediama RMT1 or RMT2 board.
+	  RMT provides LCD support, AC97 codec and other
+	  optional peripherals to the Atmel NGW100.
+
+	  This choice disables the detect pin and the write-protect pin for the
+	  MCI platform device, since it conflicts with the LCD platform device.
+	  The MCI pins can be reenabled by editing the "add device function" but
+	  this may break the setup for other displays that use these pins.
+
+endchoice
 
 choice
 	prompt "LCD panel resolution on EVKLCD10X"
@@ -32,4 +51,8 @@ config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
 
 endchoice
 
+if BOARD_ATNGW100_MRMT
+source	"arch/avr32/boards/atngw100/Kconfig_mrmt"
+endif
+
 endif	# BOARD_ATNGW100
diff --git a/arch/avr32/boards/atngw100/Kconfig_mrmt b/arch/avr32/boards/atngw100/Kconfig_mrmt
new file mode 100644
index 00000000000..9a199a207f3
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig_mrmt
@@ -0,0 +1,80 @@
+# RMT for NGW100 customization
+
+choice
+	prompt "RMT Version"
+	help
+	  Select the RMTx board version.
+
+config BOARD_MRMT_REV1
+	bool "RMT1"
+config BOARD_MRMT_REV2
+	bool "RMT2"
+
+endchoice
+
+config BOARD_MRMT_AC97
+	bool "Enable AC97 CODEC"
+	help
+	  Enable the UCB1400 AC97 CODEC driver.
+
+choice
+	prompt "Touchscreen Driver"
+	default BOARD_MRMT_ADS7846_TS
+
+config BOARD_MRMT_UCB1400_TS
+	bool "Use UCB1400 Touchscreen"
+
+config BOARD_MRMT_ADS7846_TS
+	bool "Use ADS7846 Touchscreen"
+
+endchoice
+
+choice
+	prompt "RMTx LCD Selection"
+	default BOARD_MRMT_LCD_DISABLE
+
+config BOARD_MRMT_LCD_DISABLE
+	bool "LCD Disabled"
+
+config BOARD_MRMT_LCD_LQ043T3DX0X
+	bool "Sharp LQ043T3DX0x or compatible"
+	help
+	  If using RMT2, be sure to load the resistor pack selectors accordingly
+
+if BOARD_MRMT_REV2
+config BOARD_MRMT_LCD_KWH043GM08
+	bool "Formike KWH043GM08 or compatible"
+	help
+	  Be sure to load the RMT2 resistor pack selectors accordingly
+endif
+
+endchoice
+
+if !BOARD_MRMT_LCD_DISABLE
+config BOARD_MRMT_BL_PWM
+	bool "Use PWM control for LCD Backlight"
+	help
+		Use PWM driver for controlling LCD Backlight.
+		Otherwise, LCD Backlight is always on.
+endif
+
+config BOARD_MRMT_RTC_I2C
+	bool "Use External RTC on I2C Bus"
+	help
+		RMT1 has an optional RTC device on the I2C bus.
+		It is a SII S35390A.  Be sure to select the
+		matching RTC driver.
+
+choice
+	prompt "Wireless Module on ttyS2"
+	default BOARD_MRMT_WIRELESS_ZB
+
+config BOARD_MRMT_WIRELESS_ZB
+	bool "Use ZigBee/802.15.4 Module"
+
+config BOARD_MRMT_WIRELESS_BT
+	bool "Use Bluetooth (HCI) Module"
+
+config BOARD_MRMT_WIRELESS_NONE
+	bool "Not Installed"
+endchoice
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
index 6376f5322e4..f4ebe42a825 100644
--- a/arch/avr32/boards/atngw100/Makefile
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -1,2 +1,3 @@
 obj-y					+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o
+obj-$(CONFIG_BOARD_ATNGW100_MRMT)	+= mrmt.o
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
new file mode 100644
index 00000000000..bf78e516a85
--- /dev/null
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -0,0 +1,373 @@
+/*
+ * Board-specific setup code for Remote Media Terminal 1 (RMT1)
+ * add-on board for the ATNGW100 Network Gateway
+ *
+ * Copyright (C) 2008 Mediama Technologies
+ * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/atmel_serial.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <video/atmel_lcdc.h>
+#include <sound/atmel-ac97c.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+/* Define board-specifoic GPIO assignments */
+#define PIN_LCD_BL	GPIO_PIN_PA(28)
+#define PWM_CH_BL	0	/* Must match with GPIO pin definition */
+#define PIN_LCD_DISP	GPIO_PIN_PA(31)
+#define	PIN_AC97_RST_N	GPIO_PIN_PA(30)
+#define PB_EXTINT_BASE	25
+#define TS_IRQ		0
+#define PIN_TS_EXTINT	GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)
+#define PIN_PB_LEFT	GPIO_PIN_PB(11)
+#define PIN_PB_RIGHT	GPIO_PIN_PB(12)
+#define PIN_PWR_SW_N	GPIO_PIN_PB(14)
+#define PIN_PWR_ON	GPIO_PIN_PB(13)
+#define PIN_ZB_RST_N	GPIO_PIN_PA(21)
+#define PIN_BT_RST	GPIO_PIN_PA(22)
+#define PIN_LED_SYS	GPIO_PIN_PA(16)
+#define PIN_LED_A	GPIO_PIN_PA(19)
+#define PIN_LED_B	GPIO_PIN_PE(19)
+
+#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X
+/* Sharp LQ043T3DX0x (or compatible) panel */
+static struct fb_videomode __initdata lcd_fb_modes[] = {
+	{
+		.name		= "480x272 @ 59.94Hz",
+		.refresh	= 59.94,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 2,		.right_margin	= 2,
+		.upper_margin	= 3,		.lower_margin	= 9,
+		.hsync_len	= 41,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
+	.manufacturer		= "SHA",
+	.monitor		= "LQ043T3DX02",
+	.modedb			= lcd_fb_modes,
+	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
+	.hfmin			= 14915,
+	.hfmax			= 17638,
+	.vfmin			= 53,
+	.vfmax			= 61,
+	.dclkmax		= 9260000,
+};
+
+static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+	.default_bpp		= 24,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_INVCLK_NORMAL
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
+	.default_monspecs	= &lcd_fb_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08
+/* Sharp KWH043GM08-Fxx (or compatible) panel */
+static struct fb_videomode __initdata lcd_fb_modes[] = {
+	{
+		.name		= "480x272 @ 59.94Hz",
+		.refresh	= 59.94,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 2,		.right_margin	= 2,
+		.upper_margin	= 3,		.lower_margin	= 9,
+		.hsync_len	= 41,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
+	.manufacturer		= "FOR",
+	.monitor		= "KWH043GM08",
+	.modedb			= lcd_fb_modes,
+	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
+	.hfmin			= 14915,
+	.hfmax			= 17638,
+	.vfmin			= 53,
+	.vfmax			= 61,
+	.dclkmax		= 9260000,
+};
+
+static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+	.default_bpp		= 24,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_INVCLK_INVERTED
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
+	.default_monspecs	= &lcd_fb_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_AC97
+static struct ac97c_platform_data __initdata ac97c0_data = {
+	.reset_pin		= PIN_AC97_RST_N,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
+/* NOTE: IRQ assignment relies on kernel module parameter */
+static struct platform_device rmt_ts_device = {
+	.name	= "ucb1400_ts",
+	.id	= -1,
+	}
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_BL_PWM
+/* PWM LEDs: LCD Backlight, etc */
+static struct gpio_led rmt_pwm_led[] = {
+	/* here the "gpio" is actually a PWM channel */
+	{ .name = "backlight",	.gpio = PWM_CH_BL, },
+};
+
+static struct gpio_led_platform_data rmt_pwm_led_data = {
+	.num_leds	= ARRAY_SIZE(rmt_pwm_led),
+	.leds		= rmt_pwm_led,
+};
+
+static struct platform_device rmt_pwm_led_dev = {
+	.name		= "leds-atmel-pwm",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rmt_pwm_led_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
+static int ads7846_pendown_state(void)
+{
+	return !gpio_get_value( PIN_TS_EXTINT );	/* PENIRQ.*/
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model				= 7846,
+	.keep_vref_on			= 0,	/* Use external VREF pin */
+	.vref_delay_usecs		= 0,
+	.vref_mv			= 3300,	/* VREF = 3.3V */
+	.settle_delay_usecs		= 800,
+	.penirq_recheck_delay_usecs	= 800,
+	.x_plate_ohms			= 750,
+	.y_plate_ohms			= 300,
+	.pressure_max			= 4096,
+	.debounce_max			= 1,
+	.debounce_rep			= 0,
+	.debounce_tol			= (~0),
+	.get_pendown_state		= ads7846_pendown_state,
+	.filter				= NULL,
+	.filter_init			= NULL,
+};
+
+static struct spi_board_info spi01_board_info[] __initdata = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 31250*26,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.platform_data	= &ads_info,
+		.irq		= AT32_EXTINT(TS_IRQ),
+	},
+};
+#endif
+
+/* GPIO Keys: left, right, power, etc */
+static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {
+	[0] = {
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= PIN_PWR_SW_N,
+		.active_low	= 1,
+		.desc		= "power button",
+	},
+	[1] = {
+		.type		= EV_KEY,
+		.code		= KEY_LEFT,
+		.gpio		= PIN_PB_LEFT,
+		.active_low	= 1,
+		.desc		= "left button",
+	},
+	[2] = {
+		.type		= EV_KEY,
+		.code		= KEY_RIGHT,
+		.gpio		= PIN_PB_RIGHT,
+		.active_low	= 1,
+		.desc		= "right button",
+	},
+};
+
+static const struct gpio_keys_platform_data rmt_gpio_keys_data = {
+	.nbuttons =	ARRAY_SIZE(rmt_gpio_keys_buttons),
+	.buttons =	(void *) rmt_gpio_keys_buttons,
+};
+
+static struct platform_device rmt_gpio_keys = {
+	.name =		"gpio-keys",
+	.id =		-1,
+	.dev = {
+		.platform_data = (void *) &rmt_gpio_keys_data,
+	}
+};
+
+#ifdef CONFIG_BOARD_MRMT_RTC_I2C
+static struct i2c_board_info __initdata mrmt1_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+	.irq		= 0,
+};
+#endif
+
+static void mrmt_power_off(void)
+{
+	/* PWR_ON=0 will force power off */
+	gpio_set_value( PIN_PWR_ON, 0 );
+}
+
+static int __init mrmt1_init(void)
+{
+	gpio_set_value( PIN_PWR_ON, 1 );	/* Ensure PWR_ON is enabled */
+
+	pm_power_off = mrmt_power_off;
+
+	/* Setup USARTS (other than console) */
+	at32_map_usart(2, 1, 0);	/* USART 2: /dev/ttyS1, RMT1:DB9M */
+	at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);
+			/* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */
+	at32_add_device_usart(1);
+	at32_add_device_usart(2);
+
+	/* Select GPIO Key pins */
+	at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);
+	at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);
+	at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);
+	platform_device_register(&rmt_gpio_keys);
+
+#ifdef CONFIG_BOARD_MRMT_RTC_I2C
+	i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);
+#endif
+
+#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE
+	/* User "alternate" LCDC inferface on Port E & D */
+	/* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */
+	at32_add_device_lcdc(0, &rmt_lcdc_data,
+		fbmem_start, fbmem_size,
+		(ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_AC97
+	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
+	/* Select the Touchscreen interrupt pin mode */
+	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
+			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
+	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
+	/* Select the Touchscreen interrupt pin mode */
+	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
+			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	platform_device_register(&rmt_ts_device);
+#endif
+
+	at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_LCD_DISP, "LCD_DISP" );
+	gpio_direction_output( PIN_LCD_DISP, 0 );	/* LCD DISP */
+#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE
+	/* Keep Backlight and DISP off */
+	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_LCD_BL, "LCD_BL" );
+	gpio_direction_output( PIN_LCD_BL, 0 );		/* Backlight */
+#else
+	gpio_set_value( PIN_LCD_DISP, 1 );	/* DISP asserted first */
+#ifdef CONFIG_BOARD_MRMT_BL_PWM
+	/* Use PWM for Backlight controls */
+	at32_add_device_pwm(1 << PWM_CH_BL);
+	platform_device_register(&rmt_pwm_led_dev);
+#else
+	/* Backlight always on */
+	udelay( 1 );
+	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_LCD_BL, "LCD_BL" );
+	gpio_direction_output( PIN_LCD_BL, 1 );
+#endif
+#endif
+
+	/* Make sure BT and Zigbee modules in reset */
+	at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_BT_RST, "BT_RST" );
+	gpio_direction_output( PIN_BT_RST, 1 );
+	/* BT Module in Reset */
+
+	at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );
+	gpio_direction_output( PIN_ZB_RST_N, 0 );
+	/* XBee Module in Reset */
+
+#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB
+	udelay( 1000 );
+	/* Unreset the XBee Module */
+	gpio_set_value( PIN_ZB_RST_N, 1 );
+#endif
+#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT
+	udelay( 1000 );
+	/* Unreset the BT Module */
+	gpio_set_value( PIN_BT_RST, 0 );
+#endif
+
+	return 0;
+}
+arch_initcall(mrmt1_init);
+
+static int __init mrmt1_early_init(void)
+{
+	/* To maintain power-on signal in case boot loader did not already */
+	at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );
+	gpio_direction_output( PIN_PWR_ON, 1 );
+
+	return 0;
+}
+core_initcall(mrmt1_early_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 5b022aad4bd..bc299fbbeb4 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
 		.bus_width	= 4,
+#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1)
+		.detect_pin     = GPIO_PIN_NONE,
+		.wp_pin         = GPIO_PIN_NONE,
+#else
 		.detect_pin	= GPIO_PIN_PC(25),
 		.wp_pin		= GPIO_PIN_PE(0),
+#endif
 	},
 };
 
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index 20b300cf105..623b077594f 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -94,9 +94,10 @@ static struct spi_board_info __initdata spi0_board_info[] = {
 
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= GPIO_PIN_PE(19),
-		.wp_pin		= GPIO_PIN_PE(20),
+		.bus_width		= 4,
+		.detect_pin		= GPIO_PIN_PE(19),
+		.wp_pin			= GPIO_PIN_PE(20),
+		.detect_is_active_high	= true,
 	},
 };
 
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c1b2175b4fe..523d8e183be 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -43,16 +43,16 @@ unsigned long at32_board_osc_rates[3] = {
 /* Initialized by bootloader-specific startup code. */
 struct tag *bootloader_tags __initdata;
 
-static struct fb_videomode __initdata tx14d14_modes[] = {
+static struct fb_videomode __initdata pt0434827_modes[] = {
 	{
-		.name		= "640x480 @ 60",
-		.refresh	= 60,
-		.xres		= 640,		.yres		= 480,
-		.pixclock	= KHZ2PICOS(11666),
+		.name		= "480x272 @ 72",
+		.refresh	= 72,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(10000),
 
-		.left_margin	= 80,		.right_margin	= 1,
-		.upper_margin	= 13,		.lower_margin	= 2,
-		.hsync_len	= 64,		.vsync_len	= 1,
+		.left_margin	= 1,		.right_margin	= 1,
+		.upper_margin	= 12,		.lower_margin	= 1,
+		.hsync_len	= 42,		.vsync_len	= 1,
 
 		.sync		= 0,
 		.vmode		= FB_VMODE_NONINTERLACED,
@@ -60,14 +60,14 @@ static struct fb_videomode __initdata tx14d14_modes[] = {
 };
 
 static struct fb_monspecs __initdata mimc200_default_monspecs = {
-	.manufacturer		= "HIT",
-	.monitor		= "TX14D14VM1BAB",
-	.modedb			= tx14d14_modes,
-	.modedb_len		= ARRAY_SIZE(tx14d14_modes),
+	.manufacturer		= "PT",
+	.monitor		= "PT0434827-A401",
+	.modedb			= pt0434827_modes,
+	.modedb_len		= ARRAY_SIZE(pt0434827_modes),
 	.hfmin			= 14820,
 	.hfmax			= 22230,
 	.vfmin			= 60,
-	.vfmax			= 73.3,
+	.vfmax			= 85,
 	.dclkmax		= 25200000,
 };
 
@@ -228,7 +228,8 @@ static int __init mimc200_init(void)
 	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
 
 	at32_add_device_lcdc(0, &mimc200_lcdc_data,
-			     fbmem_start, fbmem_size, 1);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_CONTROL | ATMEL_LCDC_ALT_24B_DATA);
 
 	return 0;
 }
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
new file mode 100644
index 00000000000..17b030777d3
--- /dev/null
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -0,0 +1,1363 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Wed Jun  3 00:24:53 2009
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+# CONFIG_BOARD_HAMMERHEAD is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MERISC is not set
+# CONFIG_BOARD_MIMC200 is not set
+# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
+CONFIG_BOARD_ATNGW100_MRMT=y
+CONFIG_BOARD_MRMT_REV1=y
+# CONFIG_BOARD_MRMT_REV2 is not set
+CONFIG_BOARD_MRMT_AC97=y
+# CONFIG_BOARD_MRMT_UCB1400_TS is not set
+CONFIG_BOARD_MRMT_ADS7846_TS=y
+# CONFIG_BOARD_MRMT_LCD_DISABLE is not set
+CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X=y
+# CONFIG_BOARD_MRMT_LCD_KWH043GM08 is not set
+CONFIG_BOARD_MRMT_BL_PWM=y
+CONFIG_BOARD_MRMT_RTC_I2C=y
+CONFIG_BOARD_MRMT_WIRELESS_ZB=y
+# CONFIG_BOARD_MRMT_WIRELESS_BT is not set
+# CONFIG_BOARD_MRMT_WIRELESS_NONE is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
+# CONFIG_BACKLIGHT_ATMEL_PWM is not set
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_ABDAC is not set
+CONFIG_SND_ATMEL_AC97C=m
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=m
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=y
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=m
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h
index 31881510774..b131c27ddf5 100644
--- a/arch/avr32/include/asm/atomic.h
+++ b/arch/avr32/include/asm/atomic.h
@@ -196,6 +196,6 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /*  __ASM_AVR32_ATOMIC_H */
diff --git a/arch/avr32/include/asm/bitsperlong.h b/arch/avr32/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/avr32/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
index 218b0a6bfd1..a36f9fcb8fc 100644
--- a/arch/avr32/include/asm/hw_irq.h
+++ b/arch/avr32/include/asm/hw_irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_AVR32_HW_IRQ_H
 #define __ASM_AVR32_HW_IRQ_H
 
-static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+static inline void hw_resend_irq(struct irq_chip *h, unsigned int i)
 {
 	/* Nothing to do */
 }
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
index 648f91e7187..9a92b15f6a6 100644
--- a/arch/avr32/include/asm/mman.h
+++ b/arch/avr32/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_AVR32_MMAN_H__
 #define __ASM_AVR32_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h
index caffefeeba1..8790dfc10d5 100644
--- a/arch/avr32/include/asm/signal.h
+++ b/arch/avr32/include/asm/signal.h
@@ -112,7 +112,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h
index 0152aba3515..dd7e9da2548 100644
--- a/arch/avr32/include/asm/termios.h
+++ b/arch/avr32/include/asm/termios.h
@@ -55,7 +55,7 @@ struct termio {
 */
 #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 1167fe9cf6c..98f94d041d9 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -32,8 +32,6 @@ void module_free(struct module *mod, void *module_region)
 	mod->arch.syminfo = NULL;
 
 	vfree(module_region);
-	/* FIXME: if module_region == mod->init_region, trim exception
-	 * table entries. */
 }
 
 static inline int check_rela(Elf32_Rela *rela, struct module *module,
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 803d7be0938..27227561bad 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -212,7 +212,7 @@ out:
 	return err;
 }
 
-static inline void restart_syscall(struct pt_regs *regs)
+static inline void setup_syscall_restart(struct pt_regs *regs)
 {
 	if (regs->r12 == -ERESTART_RESTARTBLOCK)
 		regs->r8 = __NR_restart_syscall;
@@ -296,7 +296,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
 			}
 			/* fall through */
 		case -ERESTARTNOINTR:
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index d547c8df157..6e3d491184e 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -75,8 +75,17 @@ void _exception(long signr, struct pt_regs *regs, int code,
 {
 	siginfo_t info;
 
-	if (!user_mode(regs))
+	if (!user_mode(regs)) {
+		const struct exception_table_entry *fixup;
+
+		/* Are we prepared to handle this kernel fault? */
+		fixup = search_exception_tables(regs->pc);
+		if (fixup) {
+			regs->pc = fixup->fixup;
+			return;
+		}
 		die("Unhandled exception in kernel mode", regs, signr);
+	}
 
 	memset(&info, 0, sizeof(info));
 	info.si_signo = signr;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 0b816428189..ddedb471f33 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -29,7 +29,7 @@ extern struct platform_device *atmel_default_console_device;
 /* Flags for selecting USART extra pins */
 #define	ATMEL_USART_RTS		0x01
 #define	ATMEL_USART_CTS		0x02
-#define	ATMEL_USART_CLK		0x03
+#define	ATMEL_USART_CLK		0x04
 
 struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 3640cdc38aa..8ea0d942cde 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -6,59 +6,65 @@
 mainmenu "Blackfin Kernel Configuration"
 
 config MMU
-	bool
-	default n
+	def_bool n
 
 config FPU
-	bool
-	default n
+	def_bool n
 
 config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
+	def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
+	def_bool n
 
 config BLACKFIN
-	bool
-	default y
+	def_bool y
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
 	select HAVE_IDE
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
 config ZONE_DMA
-	bool
-	default y
+	def_bool y
 
 config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config GENERIC_GPIO
-	bool
-	default y
+	def_bool y
 
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
 
 config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
 
 source "init/Kconfig"
 
@@ -223,6 +229,7 @@ endchoice
 
 config SMP
 	depends on BF561
+	select GENERIC_TIME
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -241,12 +248,6 @@ config IRQ_PER_CPU
 	depends on SMP
 	default y
 
-config TICK_SOURCE_SYSTMR0
-	bool
-	select BFIN_GPTIMERS
-	depends on SMP
-	default y
-
 config BF_REV_MIN
 	int
 	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
@@ -263,8 +264,8 @@ config BF_REV_MAX
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
-	default BF_REV_0_2 if (BF534 || BF536 || BF537)
+	default BF_REV_0_0 if (BF51x || BF52x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
 	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
@@ -413,12 +414,12 @@ comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
+	default "10000000" if BFIN532_IP0X
 	default "11059200" if BFIN533_STAMP
+	default "24576000" if PNAV10
+	default "25000000" # most people use this
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
 	default "30000000" if BFIN561_EZKIT
-	default "24576000" if PNAV10
-	default "10000000" if BFIN532_IP0X
 	help
 	  The frequency of CLKIN crystal oscillator on the board in Hz.
 	  Warning: This value should match the crystal on the board. Otherwise,
@@ -607,7 +608,6 @@ source kernel/Kconfig.hz
 
 config GENERIC_TIME
 	bool "Generic time"
-	depends on !SMP
 	default y
 
 config GENERIC_CLOCKEVENTS
@@ -615,12 +615,26 @@ config GENERIC_CLOCKEVENTS
 	depends on GENERIC_TIME
 	default y
 
+choice
+	prompt "Kernel Tick Source"
+	depends on GENERIC_CLOCKEVENTS
+	default TICKSOURCE_CORETMR
+
+config TICKSOURCE_GPTMR0
+	bool "Gptimer0 (SCLK domain)"
+	select BFIN_GPTIMERS
+	depends on !IPIPE
+
+config TICKSOURCE_CORETMR
+	bool "Core timer (CCLK domain)"
+
+endchoice
+
 config CYCLES_CLOCKSOURCE
-	bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Use 'CYCLES' as a clocksource"
 	depends on GENERIC_CLOCKEVENTS
 	depends on !BFIN_SCRATCH_REG_CYCLES
-	default n
+	depends on !SMP
 	help
 	  If you say Y here, you will enable support for using the 'cycles'
 	  registers as a clock source.  Doing so means you will be unable to
@@ -628,6 +642,11 @@ config CYCLES_CLOCKSOURCE
 	  still be able to read it (such as for performance monitoring), but
 	  writing the registers will most likely crash the kernel.
 
+config GPTMR0_CLOCKSOURCE
+	bool "Use GPTimer0 as a clocksource (higher rating)"
+	depends on GENERIC_CLOCKEVENTS
+	depends on !TICKSOURCE_GPTMR0
+
 source kernel/time/Kconfig
 
 comment "Misc"
@@ -808,7 +827,7 @@ config APP_STACK_L1
 config EXCEPTION_L1_SCRATCH
 	bool "Locate exception stack in L1 Scratch Memory"
 	default n
-	depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+	depends on !APP_STACK_L1
 	help
 	  Whenever an exception occurs, use the L1 Scratch memory for
 	  stack storage.  You cannot place the stacks of FLAT binaries
@@ -872,7 +891,7 @@ config BFIN_GPTIMERS
 	  are unsure, say N.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called gptimers.ko.
+	  will be called gptimers.
 
 choice
 	prompt "Uncached DMA region"
@@ -901,7 +920,7 @@ config BFIN_ICACHE_LOCK
 	bool "Enable Instruction Cache Locking"
 
 choice
-	prompt "Policy"
+	prompt "External memory cache policy"
 	depends on BFIN_DCACHE
 	default BFIN_WB if !SMP
 	default BFIN_WT if SMP
@@ -942,12 +961,22 @@ config BFIN_WT
 
 endchoice
 
-config BFIN_L2_CACHEABLE
-	bool "Cache L2 SRAM"
-	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
-	default n
-	help
-	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
+choice
+	prompt "L2 SRAM cache policy"
+	depends on (BF54x || BF561)
+	default BFIN_L2_WT
+config BFIN_L2_WB
+	bool "Write back"
+	depends on !SMP
+
+config BFIN_L2_WT
+	bool "Write through"
+	depends on !SMP
+
+config BFIN_L2_NOT_CACHED
+	bool "Not cached"
+
+endchoice
 
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
@@ -1011,21 +1040,34 @@ endmenu
 
 menu "EBIU_AMBCTL Control"
 config BANK_0
-	hex "Bank 0"
+	hex "Bank 0 (AMBCTL0.L)"
 	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 0 settings.
 
 config BANK_1
-	hex "Bank 1"
+	hex "Bank 1 (AMBCTL0.H)"
 	default 0x7BB0
 	default 0x5558 if BF54x
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 1 settings.
 
 config BANK_2
-	hex "Bank 2"
+	hex "Bank 2 (AMBCTL1.L)"
 	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 2 settings.
 
 config BANK_3
-	hex "Bank 3"
+	hex "Bank 3 (AMBCTL1.H)"
 	default 0x99B3
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 3 settings.
+
 endmenu
 
 config EBIU_MBSCTLVAL
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 79e7e63ab70..1fc4981d486 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -54,6 +54,19 @@ config DEBUG_HWERR
 	  hardware error interrupts and need to know where they are coming
 	  from.
 
+config EXACT_HWERR
+	bool "Try to make Hardware errors exact"
+	depends on DEBUG_HWERR
+	help
+	  By default, the Blackfin hardware errors are not exact - the error
+          be reported multiple cycles after the error happens. This delay
+	  can cause the wrong application, or even the kernel to receive a
+	  signal to be killed. If you are getting HW errors in your system,
+	  try turning this on to ensure they are at least comming from the
+	  proper thread.
+
+	  On production systems, it is safe (and a small optimization) to say N.
+
 config DEBUG_DOUBLEFAULT
 	bool "Debug Double Faults"
 	default n
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index d54c8283825..6f9533c3d75 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -137,7 +137,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage
+BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -150,7 +150,10 @@ install:
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
 define archhelp
-  echo  '* vmImage         - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+  echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
+  echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
+  echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
   echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'
diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore
index 3ae03994b88..229e5080867 100644
--- a/arch/blackfin/boot/.gitignore
+++ b/arch/blackfin/boot/.gitignore
@@ -1 +1,2 @@
-+vmImage
+vmImage*
+vmlinux*
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index e028d13481a..3ab6f23561d 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,24 +8,41 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage
-extra-y += vmlinux.bin vmlinux.gz
+targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
                    -d $< $@
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmImage: $(obj)/vmlinux.gz
-	$(call if_changed,uimage)
-	@$(kecho) 'Kernel: $@ is ready'
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+$(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
 
 install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index c121d6e6e2b..baec1337f28 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -259,7 +259,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -404,7 +407,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -688,14 +691,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -802,7 +805,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -831,6 +857,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -962,7 +989,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -988,8 +1016,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1012,8 +1043,8 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1048,9 +1079,9 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1065,7 +1096,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1074,7 +1105,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1087,7 +1118,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1102,7 +1133,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1111,8 +1142,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1132,7 +1161,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1148,16 +1176,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1269,7 +1301,6 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 3e562b2775d..c06262e41f7 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -144,8 +144,8 @@ CONFIG_BF526=y
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-CONFIG_BF_REV_0_1=y
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
@@ -264,7 +264,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -409,7 +412,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -491,7 +494,7 @@ CONFIG_MTD_PARTITIONS=y
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
+CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -504,9 +507,9 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -518,9 +521,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -529,7 +533,8 @@ CONFIG_MTD_ROM=m
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -597,9 +602,42 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -644,9 +682,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -715,14 +752,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -832,11 +869,35 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -920,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1008,8 +1070,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1037,10 +1099,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1058,7 +1120,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1107,33 +1169,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1206,7 +1245,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -1226,14 +1266,19 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1256,16 +1301,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1277,6 +1312,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1313,7 +1358,7 @@ CONFIG_SMB_FS=m
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1328,7 +1373,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1337,7 +1382,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1350,7 +1395,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1365,7 +1410,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1374,8 +1419,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1395,7 +1438,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1411,16 +1453,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1534,7 +1580,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 911b5dba1db..e9175c608aa 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -145,8 +145,8 @@ CONFIG_BF527=y
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
-CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -264,7 +264,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -318,7 +321,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=m
+CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -409,7 +412,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -639,9 +642,42 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -687,9 +723,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -758,14 +793,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -875,7 +910,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -909,6 +967,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1091,8 +1150,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1120,10 +1179,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1141,7 +1200,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1190,33 +1249,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1289,7 +1325,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -1309,14 +1346,20 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1339,16 +1382,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1360,6 +1393,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1396,7 +1439,7 @@ CONFIG_SMB_FS=m
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1411,7 +1454,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1420,7 +1463,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1433,7 +1476,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1448,7 +1491,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1457,8 +1500,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1478,7 +1519,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1494,16 +1534,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1611,13 +1655,12 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 4c41e03efe0..5aa63bafdd6 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -225,7 +225,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -382,7 +385,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -613,9 +616,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -667,13 +669,13 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -729,7 +731,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -904,16 +929,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -925,6 +940,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1013,7 +1038,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1022,8 +1047,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1043,7 +1066,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1059,16 +1081,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1181,7 +1207,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9c482cd1b34..fed25329e13 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -225,7 +225,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -382,7 +385,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -618,9 +621,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -674,14 +676,14 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -781,7 +783,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1068,16 +1093,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1089,6 +1104,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1177,7 +1202,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1186,8 +1211,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1207,7 +1230,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1223,16 +1245,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1345,7 +1371,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 591f6edda4f..f9ac20d5579 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -232,7 +232,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -390,7 +393,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -548,9 +551,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -649,9 +650,8 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -708,14 +708,14 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -823,7 +823,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1123,16 +1146,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1144,6 +1157,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1232,7 +1255,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1241,8 +1264,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1262,7 +1283,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1278,16 +1298,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1400,7 +1424,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 1a8e8c3adf9..ee98e227b88 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -243,7 +243,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -389,7 +392,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -546,9 +549,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -691,11 +692,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_TOUCHSCREEN_AD7879=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -720,14 +721,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -833,7 +834,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1056,16 +1080,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1077,6 +1091,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1165,7 +1189,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1174,8 +1198,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1195,7 +1217,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1211,16 +1232,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1333,7 +1358,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 2cd1c2b218d..deeabef8ab8 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -196,6 +196,7 @@ CONFIG_BFIN548_EZKIT=y
 # BF548 Specific Configuration
 #
 # CONFIG_DEB_DMA_URGENT is not set
+# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
 
 #
 # Interrupt Priority Assignment
@@ -298,7 +299,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -367,7 +371,9 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_CACHEABLE is not set
+# CONFIG_BFIN_L2_WB is not set
+CONFIG_BFIN_L2_WT=y
+# CONFIG_BFIN_L2_NOT_CACHED is not set
 # CONFIG_MPU is not set
 
 #
@@ -447,7 +453,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -616,9 +622,7 @@ CONFIG_MTD_RAM=y
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -696,7 +700,7 @@ CONFIG_SCSI_DMA=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
@@ -718,9 +722,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -752,9 +754,8 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -821,11 +822,11 @@ CONFIG_KEYBOARD_BFIN=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -858,14 +859,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -977,7 +978,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1011,6 +1035,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1193,8 +1218,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1222,10 +1247,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1243,7 +1268,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1292,33 +1317,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1414,13 +1416,8 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1476,16 +1473,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1497,6 +1484,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1539,63 +1536,47 @@ CONFIG_CIFS=y
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
@@ -1611,7 +1592,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1620,8 +1601,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1641,7 +1620,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1657,16 +1635,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1780,7 +1762,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 4a6ea8e31df..dcfbe2e2931 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -148,9 +148,9 @@ CONFIG_BF_REV_MAX=5
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
+# CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
+CONFIG_BF_REV_0_5=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
@@ -179,7 +179,6 @@ CONFIG_BFIN561_EZKIT=y
 # Core B Support
 #
 CONFIG_BF561_COREB=y
-CONFIG_BF561_COREB_RESET=y
 
 #
 # Interrupt Priority Assignment
@@ -264,7 +263,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -334,7 +336,9 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_CACHEABLE is not set
+# CONFIG_BFIN_L2_WB is not set
+CONFIG_BFIN_L2_WT=y
+# CONFIG_BFIN_L2_NOT_CACHED is not set
 # CONFIG_MPU is not set
 
 #
@@ -415,7 +419,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -570,9 +574,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -649,9 +651,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -703,13 +704,13 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -765,7 +766,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -897,16 +921,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -918,6 +932,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1006,7 +1030,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1015,8 +1039,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1036,7 +1058,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1052,16 +1073,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1174,7 +1199,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index ef1a2c84ace..174c578b8ec 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -381,7 +381,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index e2fc588e433..e17875e8abe 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -411,7 +411,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -783,7 +783,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 65a8bbb8d64..fafd95e84b2 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -347,7 +347,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -547,9 +547,9 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -641,6 +641,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9b7e9d78114..e73aa5af58b 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.28.10
+# Wed Jun  3 06:27:41 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -8,48 +9,44 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -58,37 +55,36 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -102,9 +98,11 @@ CONFIG_IOSCHED_CFQ=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -113,6 +111,10 @@ CONFIG_PREEMPT_NONE=y
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -125,22 +127,31 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 CONFIG_BF537=y
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=2
+CONFIG_BF_REV_MAX=3
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -150,7 +161,6 @@ CONFIG_IRQ_SPORT0_TX=9
 CONFIG_IRQ_SPORT1_RX=9
 CONFIG_IRQ_SPORT1_TX=9
 CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
 CONFIG_IRQ_UART0_RX=10
 CONFIG_IRQ_UART0_TX=10
 CONFIG_IRQ_UART1_RX=10
@@ -169,11 +179,12 @@ CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
 CONFIG_BFIN537_BLUETECHNIX_CM=y
+# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -196,6 +207,7 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -215,13 +227,20 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -248,6 +267,12 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -256,12 +281,14 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -275,7 +302,6 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
 #
@@ -304,36 +330,28 @@ CONFIG_BANK_3=0xFFC2
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -346,6 +364,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -358,7 +377,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -367,6 +386,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -374,8 +394,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -384,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -393,10 +412,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -404,18 +419,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -427,10 +438,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -438,6 +445,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -450,12 +458,15 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -466,6 +477,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -473,7 +488,8 @@ CONFIG_MTD_RAM=y
 #
 # Mapping drivers for chip access
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -498,33 +514,23 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -532,22 +538,17 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -561,46 +562,44 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -618,15 +617,17 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -655,138 +656,119 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# TPM devices
+# Memory mapped GPIO expanders:
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # Enable Host or Gadget support to see Inventra options
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -796,20 +778,18 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -835,7 +815,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -848,60 +827,53 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -919,13 +891,95 @@ CONFIG_ACCESS_CHECK=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -933,11 +987,12 @@ CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 569523c1c03..80211303f6b 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -355,7 +355,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -556,9 +556,9 @@ CONFIG_SMC91X=y
 # CONFIG_BFIN_MAC is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -652,6 +652,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 035b635e599..dd815f0d151 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -125,9 +125,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF548=y
 # CONFIG_BF549 is not set
 # CONFIG_BF561 is not set
-CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -422,7 +422,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -811,6 +811,10 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 7015e42ccce..16c198bd40c 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -49,7 +49,7 @@ CONFIG_FAIR_USER_SCHED=y
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -389,7 +389,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -569,9 +569,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -646,6 +646,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index dfc8e1ddd77..6b4c1a98238 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -48,7 +48,7 @@ CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -347,7 +347,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -594,8 +594,8 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_AX88180 is not set
 
 #
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 95a5f91aeba..1ec9ae2e964 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -355,7 +355,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -672,9 +672,9 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 78e24080e7f..09701f907e9 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -40,26 +40,26 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -68,7 +68,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -229,7 +228,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -374,7 +376,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -598,9 +600,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -640,11 +641,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -676,14 +677,14 @@ CONFIG_INPUT_UINPUT=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
@@ -796,6 +797,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -867,6 +869,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1111,6 +1114,7 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_YAFFS_FS=y
 CONFIG_YAFFS_YAFFS1=y
 # CONFIG_YAFFS_9BYTE_TAGS is not set
@@ -1121,7 +1125,6 @@ CONFIG_YAFFS_AUTO_YAFFS2=y
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1213,7 +1216,6 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1343,7 +1345,6 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 2bc0779d22e..ec84a53daae 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -52,7 +52,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -373,7 +373,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index e65b3a49214..6e2796240fd 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -537,7 +537,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index 94b2a9b1945..b1d92f13ef9 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -90,7 +90,7 @@ static inline int atomic_test_mask(int mask, atomic_t *v)
 
 static inline void atomic_add(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -99,7 +99,7 @@ static inline void atomic_add(int i, atomic_t *v)
 
 static inline void atomic_sub(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -110,7 +110,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -124,7 +124,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -136,7 +136,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline void atomic_inc(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter++;
@@ -145,7 +145,7 @@ static inline void atomic_inc(volatile atomic_t *v)
 
 static inline void atomic_dec(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter--;
@@ -154,7 +154,7 @@ static inline void atomic_dec(volatile atomic_t *v)
 
 static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter &= ~mask;
@@ -163,7 +163,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 
 static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter |= mask;
@@ -208,6 +208,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 #define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
 #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif				/* __ARCH_BLACKFIN_ATOMIC __ */
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index daffc0684e7..e39277ea43e 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -31,7 +31,7 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm-generic/sections.h>
+#include <asm/sections.h>
 #include <asm/ptrace.h>
 #include <asm/user.h>
 #include <linux/linkage.h>
@@ -99,15 +99,6 @@ extern const char bfin_board_name[];
 extern unsigned long bfin_sic_iwr[];
 extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern unsigned long _ramstart, _ramend, _rambase;
-extern unsigned long memory_start, memory_end, physical_mem_end;
-extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
-	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
-	_ebss_l2[], _l2_lma_start[];
-
-/* only used when MTD_UCLINUX */
-extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 extern void cache_grab_lock(int way);
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 21b036eadab..75fee2f7d9f 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -109,7 +109,8 @@ static inline void clear_bit(int nr, volatile unsigned long *addr)
 
 static inline void change_bit(int nr, volatile unsigned long *addr)
 {
-	int mask, flags;
+	int mask;
+	unsigned long flags;
 	unsigned long *ADDR = (unsigned long *)addr;
 
 	ADDR += nr >> 5;
diff --git a/arch/blackfin/include/asm/bitsperlong.h b/arch/blackfin/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/blackfin/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 6d3e11b1fc5..655e49540e4 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -2,13 +2,58 @@
 #define _BLACKFIN_BUG_H
 
 #ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
 
-#define BUG() do { \
-	dump_bfin_trace_buffer(); \
-	printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	panic("BUG!"); \
-} while (0)
+#define BFIN_BUG_OPCODE	0xefcd
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		for (;;);						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
 
 #endif
 
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 86637814cf2..2ef669ed922 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -34,9 +34,13 @@
 #define L1_CACHE_SHIFT_MAX	5
 
 #if defined(CONFIG_SMP) && \
-    !defined(CONFIG_BFIN_CACHE_COHERENT) && \
-    defined(CONFIG_BFIN_DCACHE)
-#define __ARCH_SYNC_CORE_DCACHE
+    !defined(CONFIG_BFIN_CACHE_COHERENT)
+# if defined(CONFIG_BFIN_ICACHE)
+# define __ARCH_SYNC_CORE_ICACHE
+# endif
+# if defined(CONFIG_BFIN_DCACHE)
+# define __ARCH_SYNC_CORE_DCACHE
+# endif
 #ifndef __ASSEMBLY__
 asmlinkage void __raw_smp_mark_barrier_asm(void);
 asmlinkage void __raw_smp_check_barrier_asm(void);
@@ -51,6 +55,7 @@ static inline void smp_check_barrier(void)
 }
 
 void resync_core_dcache(void);
+void resync_core_icache(void);
 #endif
 #endif
 
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 1b040f5b4fe..5c17dee53b5 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -30,12 +30,14 @@
 #ifndef _BLACKFIN_CACHEFLUSH_H
 #define _BLACKFIN_CACHEFLUSH_H
 
-extern void blackfin_icache_dcache_flush_range(unsigned long start_address, unsigned long end_address);
+#include <asm/blackfin.h>	/* for SSYNC() */
+
 extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dflush_page(void *page);
 extern void blackfin_invalidate_entire_dcache(void);
+extern void blackfin_invalidate_entire_icache(void);
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -54,32 +56,28 @@ extern void blackfin_invalidate_entire_dcache(void);
 
 static inline void flush_icache_range(unsigned start, unsigned end)
 {
-#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE)
-
-# if defined(CONFIG_BFIN_WT)
-	blackfin_icache_flush_range((start), (end));
-	flush_icache_range_others(start, end);
-# else
-	blackfin_icache_dcache_flush_range((start), (end));
-# endif
-
-#else
+#if defined(CONFIG_BFIN_WB)
+	blackfin_dcache_flush_range(start, end);
+#endif
 
-# if defined(CONFIG_BFIN_ICACHE)
-	blackfin_icache_flush_range((start), (end));
+	/* Make sure all write buffers in the data side of the core
+	 * are flushed before trying to invalidate the icache.  This
+	 * needs to be after the data flush and before the icache
+	 * flush so that the SSYNC does the right thing in preventing
+	 * the instruction prefetcher from hitting things in cached
+	 * memory at the wrong time -- it runs much further ahead than
+	 * the pipeline.
+	 */
+	SSYNC();
+#if defined(CONFIG_BFIN_ICACHE)
+	blackfin_icache_flush_range(start, end);
 	flush_icache_range_others(start, end);
-# endif
-# if defined(CONFIG_BFIN_DCACHE)
-	blackfin_dcache_flush_range((start), (end));
-# endif
-
 #endif
 }
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do { memcpy(dst, src, len);						\
      flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len));	\
-     flush_icache_range_others((unsigned long) (dst), (unsigned long) (dst) + (len));\
 } while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
@@ -100,7 +98,7 @@ do { memcpy(dst, src, len);						\
 extern unsigned long reserved_mem_dcache_on;
 extern unsigned long reserved_mem_icache_on;
 
-static inline int bfin_addr_dcachable(unsigned long addr)
+static inline int bfin_addr_dcacheable(unsigned long addr)
 {
 #ifdef CONFIG_BFIN_DCACHE
 	if (addr < (_ramend - DMA_UNCACHED_REGION))
@@ -111,6 +109,11 @@ static inline int bfin_addr_dcachable(unsigned long addr)
 		addr >= _ramend && addr < physical_mem_end)
 		return 1;
 
+#ifndef CONFIG_BFIN_L2_NOT_CACHED
+	if (addr >= L2_START && addr < L2_START + L2_LENGTH)
+		return 1;
+#endif
+
 	return 0;
 }
 
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index ad566ff9ad1..a75a6a9f094 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -53,29 +53,32 @@
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
 #endif
 
+#define SDRAM_DNON_CHBL  (CPLB_COMMON)
+#define SDRAM_EBIU       (CPLB_COMMON)
+#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
 #define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
 
 #ifdef CONFIG_SMP
-#define L2_ATTR           (INITIAL_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY         (CPLB_COMMON | CPLB_LOCK)
-#define L2_DMEMORY         (CPLB_COMMON | CPLB_LOCK)
+#define L2_ATTR          (INITIAL_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (CPLB_COMMON)
+#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
 
 #else
-#ifdef CONFIG_BFIN_L2_CACHEABLE
-#define L2_IMEMORY        (SDRAM_IGENERIC)
-#define L2_DMEMORY        (SDRAM_DGENERIC)
-#else
-#define L2_IMEMORY        (CPLB_COMMON)
-#define L2_DMEMORY        (CPLB_COMMON)
-#endif /* CONFIG_BFIN_L2_CACHEABLE */
-
-#define L2_ATTR           (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+#define L2_ATTR          (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (SDRAM_IGENERIC)
+
+# if defined(CONFIG_BFIN_L2_WB)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON)
+# elif defined(CONFIG_BFIN_L2_WT)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
+# define L2_DMEMORY      (CPLB_COMMON)
+# else
+# define L2_DMEMORY      (0)
+# endif
 #endif /* CONFIG_SMP */
 
-#define SDRAM_DNON_CHBL  (CPLB_COMMON)
-#define SDRAM_EBIU       (CPLB_COMMON)
-#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-
 #define SIZE_1K 0x00000400      /* 1K */
 #define SIZE_4K 0x00001000      /* 4K */
 #define SIZE_1M 0x00100000      /* 1M */
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index c2594ef877f..565b8136855 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -34,6 +34,7 @@ struct blackfin_cpudata {
 	unsigned int dmemctl;
 	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
+	unsigned long icache_invld_count;
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index e4f7b8043f0..c9a59622e23 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -206,10 +206,16 @@ static inline unsigned long get_dma_curr_addr(unsigned int channel)
 
 static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize)
 {
+	/* Make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below.
+	 */
+	SSYNC();
+
+	dma_ch[channel].regs->next_desc_ptr = sg;
 	dma_ch[channel].regs->cfg =
 		(dma_ch[channel].regs->cfg & ~(0xf << 8)) |
 		((ndsize & 0xf) << 8);
-	dma_ch[channel].regs->next_desc_ptr = sg;
 }
 
 static inline int dma_channel_active(unsigned int channel)
@@ -253,5 +259,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
 void *dma_memcpy(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
+void early_dma_memcpy(void *dest, const void *src, size_t count);
+void early_dma_memcpy_done(void);
 
 #endif
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index cdbfcfc30f6..230e1605d3f 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -55,50 +55,50 @@ do {											\
 #define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
 #define ELF_EXEC_PAGESIZE	4096
 
-#define	R_unused0	0	/* relocation type 0 is not defined */
-#define R_pcrel5m2	1	/*LSETUP part a */
-#define R_unused1	2	/* relocation type 2 is not defined */
-#define R_pcrel10	3	/* type 3, if cc jump <target>  */
-#define R_pcrel12_jump	4	/* type 4, jump <target> */
-#define R_rimm16	5	/* type 0x5, rN = <target> */
-#define R_luimm16	6	/* # 0x6, preg.l=<target> Load imm 16 to lower half */
-#define R_huimm16  	7	/* # 0x7, preg.h=<target> Load imm 16 to upper half */
-#define R_pcrel12_jump_s 8	/* # 0x8 jump.s <target> */
-#define R_pcrel24_jump_x 9	/* # 0x9 jump.x <target> */
-#define R_pcrel24       10	/* # 0xa call <target> , not expandable */
-#define R_unusedb       11	/* # 0xb not generated */
-#define R_unusedc       12	/* # 0xc  not used */
-#define R_pcrel24_jump_l 13	/*0xd jump.l <target> */
-#define R_pcrel24_call_x 14	/* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
-#define R_var_eq_symb    15	/* 0xf, linker should treat it same as 0x12 */
-#define R_byte_data      16	/* 0x10, .byte var = symbol */
-#define R_byte2_data     17	/* 0x11, .byte2 var = symbol */
-#define R_byte4_data     18	/* 0x12, .byte4 var = symbol and .var var=symbol */
-#define R_pcrel11        19	/* 0x13, lsetup part b */
-#define R_unused14      20	/* 0x14, undefined */
-#define R_unused15       21	/* not generated by VDSP 3.5 */
+#define R_BFIN_UNUSED0         0   /* relocation type 0 is not defined */
+#define R_BFIN_PCREL5M2        1   /* LSETUP part a */
+#define R_BFIN_UNUSED1         2   /* relocation type 2 is not defined */
+#define R_BFIN_PCREL10         3   /* type 3, if cc jump <target> */
+#define R_BFIN_PCREL12_JUMP    4   /* type 4, jump <target> */
+#define R_BFIN_RIMM16          5   /* type 0x5, rN = <target> */
+#define R_BFIN_LUIMM16         6   /* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_BFIN_HUIMM16         7   /* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_BFIN_PCREL12_JUMP_S  8   /* # 0x8 jump.s <target> */
+#define R_BFIN_PCREL24_JUMP_X  9   /* # 0x9 jump.x <target> */
+#define R_BFIN_PCREL24         10  /* # 0xa call <target> , not expandable */
+#define R_BFIN_UNUSEDB         11  /* # 0xb not generated */
+#define R_BFIN_UNUSEDC         12  /* # 0xc  not used */
+#define R_BFIN_PCREL24_JUMP_L  13  /* 0xd jump.l <target> */
+#define R_BFIN_PCREL24_CALL_X  14  /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_BFIN_VAR_EQ_SYMB     15  /* 0xf, linker should treat it same as 0x12 */
+#define R_BFIN_BYTE_DATA       16  /* 0x10, .byte var = symbol */
+#define R_BFIN_BYTE2_DATA      17  /* 0x11, .byte2 var = symbol */
+#define R_BFIN_BYTE4_DATA      18  /* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_BFIN_PCREL11         19  /* 0x13, lsetup part b */
+#define R_BFIN_UNUSED14        20  /* 0x14, undefined */
+#define R_BFIN_UNUSED15        21  /* not generated by VDSP 3.5 */
 
 /* arithmetic relocations */
-#define R_push		 0xE0
-#define R_const		 0xE1
-#define R_add		 0xE2
-#define R_sub		 0xE3
-#define R_mult		 0xE4
-#define R_div		 0xE5
-#define R_mod		 0xE6
-#define R_lshift	 0xE7
-#define R_rshift	 0xE8
-#define R_and		 0xE9
-#define R_or		 0xEA
-#define R_xor		 0xEB
-#define R_land		 0xEC
-#define R_lor		 0xED
-#define R_len		 0xEE
-#define R_neg		 0xEF
-#define R_comp		 0xF0
-#define R_page		 0xF1
-#define R_hwpage	 0xF2
-#define R_addr		 0xF3
+#define R_BFIN_PUSH            0xE0
+#define R_BFIN_CONST           0xE1
+#define R_BFIN_ADD             0xE2
+#define R_BFIN_SUB             0xE3
+#define R_BFIN_MULT            0xE4
+#define R_BFIN_DIV             0xE5
+#define R_BFIN_MOD             0xE6
+#define R_BFIN_LSHIFT          0xE7
+#define R_BFIN_RSHIFT          0xE8
+#define R_BFIN_AND             0xE9
+#define R_BFIN_OR              0xEA
+#define R_BFIN_XOR             0xEB
+#define R_BFIN_LAND            0xEC
+#define R_BFIN_LOR             0xED
+#define R_BFIN_LEN             0xEE
+#define R_BFIN_NEG             0xEF
+#define R_BFIN_COMP            0xF0
+#define R_BFIN_PAGE            0xF1
+#define R_BFIN_HWPAGE          0xF2
+#define R_BFIN_ADDR            0xF3
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
    use of this is to invoke "./ld.so someprog" to test out a new version of
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index b30a2968e27..ec58efc130e 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -35,21 +35,39 @@
 #else
 # define LOAD_IPIPE_IPEND
 #endif
+
+#ifndef CONFIG_EXACT_HWERR
+/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
+ * otherwise it is a waste of cycles.
+ */
+# ifndef CONFIG_DEBUG_KERNEL
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# else /* CONFIG_DEBUG_KERNEL */
 #define INTERRUPT_ENTRY(N)						\
     [--sp] = SYSCFG;							\
-									\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
     R0 = (N);								\
     LOAD_IPIPE_IPEND							\
     jump __common_int_entry;
+# endif /* CONFIG_DEBUG_KERNEL */
 
 /* For timer interrupts, we need to save IPEND, since the user_mode
-	   macro accesses it to determine where to account time.  */
+ *macro accesses it to determine where to account time.
+ */
 #define TIMER_INTERRUPT_ENTRY(N)					\
     [--sp] = SYSCFG;							\
-									\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
@@ -58,6 +76,74 @@
     r1 = [p0];								\
     R0 = (N);								\
     jump __common_int_entry;
+#else /* CONFIG_EXACT_HWERR is defined */
+
+/* if we want hardware error to be exact, we need to do a SSYNC (which forces
+ * read/writes to complete to the memory controllers), and check to see that
+ * caused a pending HW error condition. If so, we assume it was caused by user
+ * space, by setting the same interrupt that we are in (so it goes off again)
+ * and context restore, and a RTI (without servicing anything). This should
+ * cause the pending HWERR to fire, and when that is done, this interrupt will
+ * be re-serviced properly.
+ * As you can see by the code - we actually need to do two SSYNCS - one to
+ * make sure the read/writes complete, and another to make sure the hardware
+ * error is recognized by the core.
+ */
+#define INTERRUPT_ENTRY(N)						\
+    SSYNC;								\
+    SSYNC;								\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    SSYNC;								\
+    SSYNC;								\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+#endif	/* CONFIG_EXACT_HWERR */
 
 /* This one pushes RETI without using CLI.  Interrupts are enabled.  */
 #define SAVE_CONTEXT_SYSCALL	save_context_syscall
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 40a8c178f10..8643680f0f7 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -1 +1,13 @@
-/* empty */
+/*
+ * Blackfin ftrace code
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_FTRACE_H__
+#define __ASM_BFIN_FTRACE_H__
+
+#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call: LINK + CALL */
+
+#endif
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index b0f847ae4bf..89f08decb8e 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -30,6 +30,7 @@
 # else
 #  define MAX_BLACKFIN_GPTIMERS 11
 #  define TIMER8_GROUP_REG      TIMER_ENABLE1
+#  define TIMER_GROUP2          1
 # endif
 # define TIMER0_GROUP_REG       TIMER_ENABLE0
 #endif
@@ -40,10 +41,12 @@
 # define MAX_BLACKFIN_GPTIMERS 12
 # define TIMER0_GROUP_REG      TMRS8_ENABLE
 # define TIMER8_GROUP_REG      TMRS4_ENABLE
+# define TIMER_GROUP2          1
 #endif
 /*
  * All others: 3 timers:
  */
+#define TIMER_GROUP1           0
 #if !defined(MAX_BLACKFIN_GPTIMERS)
 # define MAX_BLACKFIN_GPTIMERS 3
 # define TIMER0_GROUP_REG      TIMER_ENABLE
@@ -109,8 +112,8 @@
 #define TIMER_ERR_PROG_PER  0x8000
 #define TIMER_ERR_PROG_PW   0xC000
 #define TIMER_EMU_RUN       0x0200
-#define	TIMER_TOGGLE_HI     0x0100
-#define	TIMER_CLK_SEL       0x0080
+#define TIMER_TOGGLE_HI     0x0100
+#define TIMER_CLK_SEL       0x0080
 #define TIMER_OUT_DIS       0x0040
 #define TIMER_TIN_SEL       0x0020
 #define TIMER_IRQ_ENA       0x0010
@@ -169,23 +172,25 @@
 
 /* The actual gptimer API */
 
-void     set_gptimer_pwidth    (int timer_id, uint32_t width);
-uint32_t get_gptimer_pwidth    (int timer_id);
-void     set_gptimer_period    (int timer_id, uint32_t period);
-uint32_t get_gptimer_period    (int timer_id);
-uint32_t get_gptimer_count     (int timer_id);
-uint16_t get_gptimer_intr      (int timer_id);
-void     clear_gptimer_intr    (int timer_id);
-uint16_t get_gptimer_over      (int timer_id);
-void     clear_gptimer_over    (int timer_id);
-void     set_gptimer_config    (int timer_id, uint16_t config);
-uint16_t get_gptimer_config    (int timer_id);
-void     set_gptimer_pulse_hi  (int timer_id);
+void     set_gptimer_pwidth(int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(int timer_id);
+void     set_gptimer_period(int timer_id, uint32_t period);
+uint32_t get_gptimer_period(int timer_id);
+uint32_t get_gptimer_count(int timer_id);
+int      get_gptimer_intr(int timer_id);
+void     clear_gptimer_intr(int timer_id);
+int      get_gptimer_over(int timer_id);
+void     clear_gptimer_over(int timer_id);
+void     set_gptimer_config(int timer_id, uint16_t config);
+uint16_t get_gptimer_config(int timer_id);
+int      get_gptimer_run(int timer_id);
+void     set_gptimer_pulse_hi(int timer_id);
 void     clear_gptimer_pulse_hi(int timer_id);
-void     enable_gptimers       (uint16_t mask);
-void     disable_gptimers      (uint16_t mask);
-uint16_t get_enabled_gptimers  (void);
-uint32_t get_gptimer_status    (int group);
-void     set_gptimer_status    (int group, uint32_t value);
+void     enable_gptimers(uint16_t mask);
+void     disable_gptimers(uint16_t mask);
+void     disable_gptimers_sync(uint16_t mask);
+uint16_t get_enabled_gptimers(void);
+uint32_t get_gptimer_status(int group);
+void     set_gptimer_status(int group, uint32_t value);
 
 #endif
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 63b2d8c7857..3022b5c96b3 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -80,19 +80,22 @@ static inline unsigned int readl(const volatile void __iomem *addr)
 #define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
 #define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
 
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
+/* Convert "I/O port addresses" to actual addresses.  i.e. ugly casts. */
+#define __io(port) ((void *)(unsigned long)(port))
+
+#define inb(port)    readb(__io(port))
+#define inw(port)    readw(__io(port))
+#define inl(port)    readl(__io(port))
+#define outb(x,port) writeb(x,__io(port))
+#define outw(x,port) writew(x,__io(port))
+#define outl(x,port) writel(x,__io(port))
+
+#define inb_p(port)    inb(__io(port))
+#define inw_p(port)    inw(__io(port))
+#define inl_p(port)    inl(__io(port))
+#define outb_p(x,port) outb(x,__io(port))
+#define outw_p(x,port) outw(x,__io(port))
+#define outl_p(x,port) outl(x,__io(port))
 
 #define ioread8_rep(a,d,c)	readsb(a,d,c)
 #define ioread16_rep(a,d,c)	readsw(a,d,c)
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 343b56361ec..bbe1c3726b6 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.9-00"
+#define IPIPE_ARCH_STRING     "1.10-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    9
+#define IPIPE_MINOR_NUMBER    10
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -54,10 +54,11 @@ do {						\
 
 #define task_hijacked(p)						\
 	({								\
-		int __x__ = ipipe_current_domain != ipipe_root_domain;	\
-		/* We would need to clear the SYNC flag for the root domain */ \
-		/* over the current processor in SMP mode. */		\
-		local_irq_enable_hw(); __x__;				\
+		int __x__ = __ipipe_root_domain_p;			\
+		__clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \
+		if (__x__)						\
+			local_irq_enable_hw();				\
+		!__x__;							\
 	})
 
 struct ipipe_domain;
@@ -179,23 +180,24 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
-		if (ipd == ipipe_root_domain) {				\
+		if (!__ipipe_pipeline_head_p(ipd))			\
 			local_irq_enable_hw();				\
-			if (ipipe_virtual_irq_p(irq))			\
+		if (ipd == ipipe_root_domain) {				\
+			if (unlikely(ipipe_virtual_irq_p(irq))) {	\
+				irq_enter();				\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-			else						\
+				irq_exit();				\
+			} else 						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
-			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
-			local_irq_enable_nohead(ipd);			\
 			ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
 			/* Attempt to exit the outer interrupt level before \
 			 * starting the deferred IRQ processing. */	\
-			local_irq_disable_nohead(ipd);			\
 			__ipipe_run_irqtail();				\
 			__set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 		}							\
+		local_irq_disable_hw();					\
 	} while (0)
 
 #define __ipipe_syscall_watched_p(p, sc)	\
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 7645e85a5f6..400bdd52ce8 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -17,270 +17,17 @@
 #ifndef _BFIN_IRQ_H_
 #define _BFIN_IRQ_H_
 
-/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
-#include <mach/irq.h>
-#include <asm/pda.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_SMP
-/* Forward decl needed due to cdef inter dependencies */
-static inline uint32_t __pure bfin_dspid(void);
-# define blackfin_core_id() (bfin_dspid() & 0xff)
-# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
-#else
-extern unsigned long bfin_irq_flags;
-#endif
-
-#ifdef CONFIG_IPIPE
-
-#include <linux/ipipe_trace.h>
+#include <linux/irqflags.h>
 
-void __ipipe_unstall_root(void);
-
-void __ipipe_restore_root(unsigned long flags);
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __all_masked_irq_flags 0x3f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d"(x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __all_masked_irq_flags 0x1f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d"(x) \
-	)
-#endif
-
-#define irqs_enabled_from_flags_hw(x)	((x) != __all_masked_irq_flags)
-#define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
-#define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
-
-#define local_save_flags(x)					 \
-	do {							 \
-		(x) = __ipipe_test_root() ?			 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-#define local_irq_save(x)					 \
-	do {						 	 \
-		(x) = __ipipe_test_and_stall_root() ?		 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-static inline void local_irq_restore(unsigned long x)
-{
-	barrier();
-	__ipipe_restore_root(x == __all_masked_irq_flags);
-}
-
-#define local_irq_disable()			\
-	do {					\
-		__ipipe_stall_root();		\
-		barrier();			\
-	} while (0)
-
-static inline void local_irq_enable(void)
-{
-	barrier();
-	__ipipe_unstall_root();
-}
-
-#define irqs_disabled()		__ipipe_test_root()
-
-#define local_save_flags_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d"(x) \
-	)
-
-#define	irqs_disabled_hw()				\
-	({						\
-		unsigned long flags;			\
-		local_save_flags_hw(flags);		\
-		!irqs_enabled_from_flags_hw(flags);	\
-	})
-
-static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
-{
-	/* Merge virtual and real interrupt mask bits into a single
-	   32bit word. */
-	return (real & ~(1 << 31)) | ((virt != 0) << 31);
-}
-
-static inline int raw_demangle_irq_bits(unsigned long *x)
-{
-	int virt = (*x & (1 << 31)) != 0;
-	*x &= ~(1L << 31);
-	return virt;
-}
-
-#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
-
-#define local_irq_disable_hw()						\
-	do {								\
-		int _tmp_dummy;						\
-		if (!irqs_disabled_hw())				\
-			ipipe_trace_begin(0x80000000);			\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw()						\
-	do {								\
-		if (irqs_disabled_hw())					\
-			ipipe_trace_end(0x80000000);			\
-		__asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags));	\
-	} while (0)
-
-#define local_irq_save_hw(x)				\
-	do {						\
-		__save_and_cli_hw(x);			\
-		if (local_test_iflag_hw(x))		\
-			ipipe_trace_begin(0x80000001);	\
-	} while (0)
-
-#define local_irq_restore_hw(x)				\
-	do {						\
-		if (local_test_iflag_hw(x)) {		\
-			ipipe_trace_end(0x80000001);	\
-			local_irq_enable_hw_notrace();	\
-		}					\
-	} while (0)
-
-#define local_irq_disable_hw_notrace()					\
-	do {								\
-		int _tmp_dummy;						\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw_notrace() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_save_hw_notrace(x) __save_and_cli_hw(x)
-
-#define local_irq_restore_hw_notrace(x)			\
-	do {						\
-		if (local_test_iflag_hw(x))		\
-			local_irq_enable_hw_notrace();	\
-	} while (0)
-
-#else /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#define local_irq_enable_hw() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_disable_hw()			\
-	do {					\
-		int _tmp_dummy;			\
-		__asm__ __volatile__ (		\
-			"cli %0;"		\
-			: "=d" (_tmp_dummy));	\
-	} while (0)
-
-#define local_irq_restore_hw(x) \
-	do { \
-		if (irqs_enabled_from_flags_hw(x)) \
-			local_irq_enable_hw(); \
-	} while (0)
-
-#define local_irq_save_hw(x)		__save_and_cli_hw(x)
-
-#define local_irq_disable_hw_notrace()	local_irq_disable_hw()
-#define local_irq_enable_hw_notrace()	local_irq_enable_hw()
-#define local_irq_save_hw_notrace(x)	local_irq_save_hw(x)
-#define local_irq_restore_hw_notrace(x)	local_irq_restore_hw(x)
-
-#endif  /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#else /* !CONFIG_IPIPE */
-
-/*
- * Interrupt configuring macros.
- */
-#define local_irq_disable() \
-	do { \
-		int __tmp_dummy; \
-		__asm__ __volatile__( \
-			"cli %0;" \
-			: "=d" (__tmp_dummy) \
-		); \
-	} while (0)
-
-#define local_irq_enable() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d" (bfin_irq_flags) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d" (x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d" (x) \
-	)
-#endif
-
-#define local_save_flags(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d" (x) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
-#else
-#define irqs_enabled_from_flags(x) ((x) != 0x1f)
-#endif
-
-#define local_irq_restore(x) \
-	do { \
-		if (irqs_enabled_from_flags(x)) \
-			local_irq_enable(); \
-	} while (0)
-
-/* For spinlocks etc */
-#define local_irq_save(x) __save_and_cli(x)
-
-#define irqs_disabled()				\
-({						\
-	unsigned long flags;			\
-	local_save_flags(flags);		\
-	!irqs_enabled_from_flags(flags);	\
-})
-
-#define local_irq_save_hw(x)		local_irq_save(x)
-#define local_irq_restore_hw(x)		local_irq_restore(x)
-#define local_irq_enable_hw()		local_irq_enable()
-#define local_irq_disable_hw()		local_irq_disable()
-#define irqs_disabled_hw()		irqs_disabled()
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
+#include <mach/irq.h>
 
-#endif /* !CONFIG_IPIPE */
+/* Xenomai IPIPE helpers */
+#define local_irq_restore_hw(x) local_irq_restore(x)
+#define local_irq_save_hw(x)    local_irq_save(x)
+#define local_irq_enable_hw(x)  local_irq_enable(x)
+#define local_irq_disable_hw(x) local_irq_disable(x)
+#define irqs_disabled_hw(x)     irqs_disabled(x)
 
 #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
 # define NOP_PAD_ANOMALY_05000244 "nop; nop;"
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
new file mode 100644
index 00000000000..139cba4651b
--- /dev/null
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -0,0 +1,63 @@
+/*
+ * interface to Blackfin CEC
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_IRQFLAGS_H__
+#define __ASM_BFIN_IRQFLAGS_H__
+
+#ifdef CONFIG_SMP
+# include <asm/pda.h>
+# include <asm/processor.h>
+/* Forward decl needed due to cdef inter dependencies */
+static inline uint32_t __pure bfin_dspid(void);
+# define blackfin_core_id() (bfin_dspid() & 0xff)
+# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
+#else
+extern unsigned long bfin_irq_flags;
+#endif
+
+static inline void bfin_sti(unsigned long flags)
+{
+	asm volatile("sti %0;" : : "d" (flags));
+}
+
+static inline unsigned long bfin_cli(void)
+{
+	unsigned long flags;
+	asm volatile("cli %0;" : "=d" (flags));
+	return flags;
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	bfin_cli();
+}
+static inline void raw_local_irq_enable(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0)
+
+#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if (!raw_irqs_disabled_flags(flags))
+		raw_local_irq_enable();
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+	return flags;
+}
+#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif
diff --git a/arch/blackfin/include/asm/mutex-dec.h b/arch/blackfin/include/asm/mutex-dec.h
deleted file mode 100644
index 0134151656a..00000000000
--- a/arch/blackfin/include/asm/mutex-dec.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * include/asm-generic/mutex-dec.h
- *
- * Generic implementation of the mutex fastpath, based on atomic
- * decrement/increment.
- */
-#ifndef _ASM_GENERIC_MUTEX_DEC_H
-#define _ASM_GENERIC_MUTEX_DEC_H
-
-/**
- *  __mutex_fastpath_lock - try to take the lock by moving the count
- *                          from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function MUST leave the value lower than
- * 1 even when the "1" assertion wasn't true.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		fail_fn(count);
-	else
-		smp_mb();
-}
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns.
- */
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		return fail_fn(count);
-	else {
-		smp_mb();
-		return 0;
-	}
-}
-
-/**
- *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 0
- *
- * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
- * In the failure case, this function is allowed to either set the value to
- * 1, or to set it to a value lower than 1.
- *
- * If the implementation sets it to a value of lower than 1, then the
- * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
- * to return 0 otherwise.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	smp_mb();
-	if (unlikely(atomic_inc_return(count) <= 0))
-		fail_fn(count);
-}
-
-#define __mutex_slowpath_needs_to_unlock()		1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to a value lower than 1, and return 0 (failure)
- * if it wasn't 1 originally, or return 1 (success) otherwise. This function
- * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
- * Additionally, if the value was < 0 originally, this function must not leave
- * it to 0 on failure.
- *
- * If the architecture has no effective trylock variant, it should call the
- * <fail_fn> spinlock-based trylock variant unconditionally.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	/*
-	 * We have two variants here. The cmpxchg based one is the best one
-	 * because it never induce a false contention state.  It is included
-	 * here because architectures using the inc/dec algorithms over the
-	 * xchg ones are much more likely to support cmpxchg natively.
-	 *
-	 * If not we fall back to the spinlock based variant - that is
-	 * just as efficient (and simpler) as a 'destructive' probing of
-	 * the mutex state would be.
-	 */
-#ifdef __HAVE_ARCH_CMPXCHG
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1)) {
-		smp_mb();
-		return 1;
-	}
-	return 0;
-#else
-	return fail_fn(count);
-#endif
-}
-
-#endif
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 344f6a8c1f2..3ea2016a1d4 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -81,7 +81,7 @@ extern unsigned long memory_end;
 #define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
 				((void *)(kaddr) < (void *)memory_end))
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif				/* __ASSEMBLY__ */
 
diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index a67142740df..b42555c1431 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -64,8 +64,6 @@ struct blackfin_pda {			/* Per-processor Data Area */
 
 extern struct blackfin_pda cpu_pda[];
 
-void reserve_pda(void);
-
 #endif	/* __ASSEMBLY__ */
 
 #endif /* _ASM_BLACKFIN_PDA_H */
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index 0eece23b41c..3040415523b 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -131,8 +131,8 @@ unsigned long get_wchan(struct task_struct *p);
 /* Get the Silicon Revision of the chip */
 static inline uint32_t __pure bfin_revid(void)
 {
-	/* stored in the upper 4 bits */
-	uint32_t revid = bfin_read_CHIPID() >> 28;
+	/* Always use CHIPID, to work around ANOMALY_05000234 */
+	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
 #ifdef CONFIG_BF52x
 	/* ANOMALY_05000357
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 1443c3353a8..e7fd0ecd73f 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -4,4 +4,15 @@
 /* nothing to see, move along */
 #include <asm-generic/sections.h>
 
+/* only used when MTD_UCLINUX */
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+
+extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
+
 #endif
diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h
index 87951d25145..2eea9079445 100644
--- a/arch/blackfin/include/asm/signal.h
+++ b/arch/blackfin/include/asm/signal.h
@@ -104,7 +104,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index a4c8254bec5..294dbda2416 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -35,10 +35,10 @@
 #define _BLACKFIN_SYSTEM_H
 
 #include <linux/linkage.h>
-#include <linux/compiler.h>
+#include <linux/irqflags.h>
 #include <mach/anomaly.h>
+#include <asm/cache.h>
 #include <asm/pda.h>
-#include <asm/processor.h>
 #include <asm/irq.h>
 
 /*
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
index ddc43ce3853..589e937ed1e 100644
--- a/arch/blackfin/include/asm/time.h
+++ b/arch/blackfin/include/asm/time.h
@@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off;
 extern unsigned int __bfin_cycles_mod;
 #endif
 
+extern void __init setup_core_timer(void);
 #endif
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 3248033531e..8894e9ffbb5 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -59,12 +59,8 @@ static inline int is_in_rom(unsigned long addr)
 #ifndef CONFIG_ACCESS_CHECK
 static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
 #else
-#ifdef CONFIG_ACCESS_OK_L1
-extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text));
-#else
 extern int _access_ok(unsigned long addr, unsigned long size);
 #endif
-#endif
 
 /*
  * The exception table consists of pairs of addresses: the first is the
@@ -83,9 +79,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -233,16 +226,29 @@ strncpy_from_user(char *dst, const char *src, long count)
 }
 
 /*
- * Return the size of a string (including the ending 0)
+ * Get the size of a string in user space.
+ *   src: The string to measure
+ *     n: The maximum valid length
  *
- * Return 0 on exception, a value greater than N if too long
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than n.
  */
-static inline long strnlen_user(const char *src, long n)
+static inline long __must_check strnlen_user(const char *src, long n)
 {
-	return (strlen(src) + 1);
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strnlen(src, n) + 1;
 }
 
-#define strlen_user(str) strnlen_user(str, 32767)
+static inline long __must_check strlen_user(const char *src)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strlen(src) + 1;
+}
 
 /*
  * Zero Userspace
@@ -251,6 +257,8 @@ static inline long strnlen_user(const char *src, long n)
 static inline unsigned long __must_check
 __clear_user(void *to, unsigned long n)
 {
+	if (!access_ok(VERIFY_WRITE, to, n))
+		return n;
 	memset(to, 0, n);
 	return 0;
 }
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index cf5066d3efd..da35133c171 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -380,8 +380,9 @@
 #define __NR_inotify_init1	365
 #define __NR_preadv		366
 #define __NR_pwritev		367
+#define __NR_rt_tgsigqueueinfo	368
 
-#define __NR_syscall		368
+#define __NR_syscall		369
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index fd4d4328a0f..3731088e181 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,6 +15,10 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
+CFLAGS_REMOVE_ftrace.o = -pg
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
@@ -23,6 +27,7 @@ obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_STACKTRACE)             += stacktrace.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 8531693fb48..e0bf8cc0690 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -20,6 +20,11 @@
 #include <asm/dma.h>
 #include <asm/uaccess.h>
 
+/*
+ * To make sure we work around 05000119 - we always check DMA_DONE bit,
+ * never the DMA_RUN bit
+ */
+
 struct dma_channel dma_ch[MAX_DMA_CHANNELS];
 EXPORT_SYMBOL(dma_ch);
 
@@ -232,6 +237,87 @@ void blackfin_dma_resume(void)
 void __init blackfin_dma_early_init(void)
 {
 	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+}
+
+void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
+{
+	unsigned long dst = (unsigned long)pdst;
+	unsigned long src = (unsigned long)psrc;
+	struct dma_register *dst_ch, *src_ch;
+
+	/* We assume that everything is 4 byte aligned, so include
+	 * a basic sanity check
+	 */
+	BUG_ON(dst % 4);
+	BUG_ON(src % 4);
+	BUG_ON(size % 4);
+
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
+	src_ch = 0;
+	/* Find an avalible memDMA channel */
+	while (1) {
+		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		}
+
+		if (!bfin_read16(&src_ch->cfg)) {
+			break;
+		} else {
+			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
+				bfin_write16(&src_ch->cfg, 0);
+		}
+
+	}
+
+	/* Destination */
+	bfin_write32(&dst_ch->start_addr, dst);
+	bfin_write16(&dst_ch->x_count, size >> 2);
+	bfin_write16(&dst_ch->x_modify, 1 << 2);
+	bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Source */
+	bfin_write32(&src_ch->start_addr, src);
+	bfin_write16(&src_ch->x_count, size >> 2);
+	bfin_write16(&src_ch->x_modify, 1 << 2);
+	bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Enable */
+	bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32);
+	bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32);
+
+	/* Since we are atomic now, don't use the workaround ssync */
+	__builtin_bfin_ssync();
+}
+
+void __init early_dma_memcpy_done(void)
+{
+	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
+	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
+		continue;
+
+	bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	/*
+	 * Now that DMA is done, we would normally flush cache, but
+	 * i/d cache isn't running this early, so we don't bother,
+	 * and just clear out the DMA channel for next time
+	 */
+	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+	bfin_write_MDMA_D0_CONFIG(0);
+	bfin_write_MDMA_D1_CONFIG(0);
+
+	__builtin_bfin_ssync();
 }
 
 /**
@@ -367,10 +453,10 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	unsigned long src = (unsigned long)psrc;
 	size_t bulk, rest;
 
-	if (bfin_addr_dcachable(src))
+	if (bfin_addr_dcacheable(src))
 		blackfin_dcache_flush_range(src, src + size);
 
-	if (bfin_addr_dcachable(dst))
+	if (bfin_addr_dcacheable(dst))
 		blackfin_dcache_invalidate_range(dst, dst + size);
 
 	bulk = size & ~0xffff;
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index a0678da4053..beffa00a93c 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -313,15 +313,6 @@ inline void portmux_setup(unsigned short per)
 # define portmux_setup(...)  do { } while (0)
 #endif
 
-static int __init bfin_gpio_init(void)
-{
-	printk(KERN_INFO "Blackfin GPIO Controller\n");
-
-	return 0;
-}
-arch_initcall(bfin_gpio_init);
-
-
 #ifndef CONFIG_BF54x
 /***********************************************************
 *
@@ -1021,15 +1012,6 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR
-		       "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n",
-		       gpio);
-		local_irq_restore_hw(flags);
-		return -EBUSY;
-	}
 	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 01f917d58b5..aa05e638fb7 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -16,7 +16,6 @@ EXPORT_SYMBOL(bfin_return_from_exception);
 
 /* All the Blackfin cache functions: mach-common/cache.S */
 EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
-EXPORT_SYMBOL(blackfin_icache_dcache_flush_range);
 EXPORT_SYMBOL(blackfin_icache_flush_range);
 EXPORT_SYMBOL(blackfin_dcache_flush_range);
 EXPORT_SYMBOL(blackfin_dflush_page);
@@ -104,3 +103,8 @@ EXPORT_SYMBOL(__raw_smp_mark_barrier_asm);
 EXPORT_SYMBOL(__raw_smp_check_barrier_asm);
 #endif
 #endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
index c6ff947f9d3..d5a86c3017f 100644
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	}
 
 	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= DMEM_CNTR;
+
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 3e329a6ce04..c006a44527b 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -64,7 +64,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
 
 	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
+	icplb_tbl[cpu][i_i++].data = CPLB_VALID | i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 87463ce87f5..784923e52a9 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -151,7 +151,7 @@ static noinline int dcplb_miss(unsigned int cpu)
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
-	if (bfin_addr_dcachable(addr)) {
+	if (bfin_addr_dcacheable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #ifdef CONFIG_BFIN_WT
 		d_data |= CPLB_L1_AOW | CPLB_WT;
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index c6ff947f9d3..d5a86c3017f 100644
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	}
 
 	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= DMEM_CNTR;
+
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index 8cbb47c7b66..12b030842fd 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -28,6 +28,7 @@
 #include <asm/cplbinit.h>
 #include <asm/cplb.h>
 #include <asm/mmu_context.h>
+#include <asm/traps.h>
 
 /*
  * WARNING
@@ -100,28 +101,6 @@ static inline void write_icplb_data(int cpu, int idx, unsigned long data,
 #endif
 }
 
-/*
- * Given the contents of the status register, return the index of the
- * CPLB that caused the fault.
- */
-static inline int faulting_cplb_index(int status)
-{
-	int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
-	return 30 - signbits;
-}
-
-/*
- * Given the contents of the status register and the DCPLB_DATA contents,
- * return true if a write access should be permitted.
- */
-static inline int write_permitted(int status, unsigned long data)
-{
-	if (status & FAULT_USERSUPV)
-		return !!(data & CPLB_SUPV_WR);
-	else
-		return !!(data & CPLB_USER_WR);
-}
-
 /* Counters to implement round-robin replacement.  */
 static int icplb_rr_index[NR_CPUS] PDT_ATTR;
 static int dcplb_rr_index[NR_CPUS] PDT_ATTR;
@@ -245,43 +224,16 @@ MGR_ATTR static int dcplb_miss(int cpu)
 	return CPLB_RELOADED;
 }
 
-MGR_ATTR static noinline int dcplb_protection_fault(int cpu)
-{
-	int status = bfin_read_DCPLB_STATUS();
-
-	nr_dcplb_prot[cpu]++;
-
-	if (likely(status & FAULT_RW)) {
-		int idx = faulting_cplb_index(status);
-		unsigned long regaddr = DCPLB_DATA0 + idx * 4;
-		unsigned long data = bfin_read32(regaddr);
-
-		/* Check if fault is to dirty a clean page */
-		if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
-		    write_permitted(status, data)) {
-
-			dcplb_tbl[cpu][idx].data = data;
-			bfin_write32(regaddr, data);
-			return CPLB_RELOADED;
-		}
-	}
-
-	return CPLB_PROT_VIOL;
-}
-
 MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
 	unsigned int cpu = smp_processor_id();
 	switch (cause) {
-	case 0x2C:
+	case VEC_CPLB_I_M:
 		return icplb_miss(cpu);
-	case 0x26:
+	case VEC_CPLB_M:
 		return dcplb_miss(cpu);
 	default:
-		if (unlikely(cause == 0x23))
-			return dcplb_protection_fault(cpu);
-
 		return CPLB_UNKNOWN_ERR;
 	}
 }
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index c8ad051742e..2ab56811841 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -178,25 +178,15 @@ int __init setup_early_printk(char *buf)
 
 asmlinkage void __init init_early_exception_vectors(void)
 {
+	u32 evt;
 	SSYNC();
 
 	/* cannot program in software:
 	 * evt0 - emulation (jtag)
 	 * evt1 - reset
 	 */
-	bfin_write_EVT2(early_trap);
-	bfin_write_EVT3(early_trap);
-	bfin_write_EVT5(early_trap);
-	bfin_write_EVT6(early_trap);
-	bfin_write_EVT7(early_trap);
-	bfin_write_EVT8(early_trap);
-	bfin_write_EVT9(early_trap);
-	bfin_write_EVT10(early_trap);
-	bfin_write_EVT11(early_trap);
-	bfin_write_EVT12(early_trap);
-	bfin_write_EVT13(early_trap);
-	bfin_write_EVT14(early_trap);
-	bfin_write_EVT15(early_trap);
+	for (evt = EVT2; evt <= EVT15; evt += 4)
+		bfin_write32(evt, early_trap);
 	CSYNC();
 
 	/* Set all the return from interrupt, exception, NMI to a known place
@@ -212,11 +202,15 @@ asmlinkage void __init init_early_exception_vectors(void)
 asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 {
 	/* This can happen before the uart is initialized, so initialize
-	 * the UART now
+	 * the UART now (but only if we are running on the processor we think
+	 * we are compiled for - otherwise we write to MMRs that don't exist,
+	 * and cause other problems. Nothing comes out the UART, but it does
+	 * end up in the __buf_log.
 	 */
-	if (likely(early_console == NULL))
+	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
 		setup_early_printk(DEFAULT_EARLY_PORT);
 
+	printk(KERN_EMERG "Early panic\n");
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_bfin_trace_buffer();
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
new file mode 100644
index 00000000000..6980b7a0615
--- /dev/null
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -0,0 +1,140 @@
+/*
+ * mcount and friends -- ftrace stuff
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+.text
+
+/* GCC will have called us before setting up the function prologue, so we
+ * can clobber the normal scratch registers, but we need to make sure to
+ * save/restore the registers used for argument passing (R0-R2) in case
+ * the profiled function is using them.  With data registers, R3 is the
+ * only one we can blow away.  With pointer registers, we have P0-P2.
+ *
+ * Upon entry, the RETS will point to the top of the current profiled
+ * function.  And since GCC setup the frame for us, the previous function
+ * will be waiting there.  mmmm pie.
+ */
+ENTRY(__mcount)
+	/* save third function arg early so we can do testing below */
+	[--sp] = r2;
+
+	/* load the function pointer to the tracer */
+	p0.l = _ftrace_trace_function;
+	p0.h = _ftrace_trace_function;
+	r3 = [p0];
+
+	/* optional micro optimization: don't call the stub tracer */
+	r2.l = _ftrace_stub;
+	r2.h = _ftrace_stub;
+	cc = r2 == r3;
+	if ! cc jump .Ldo_trace;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* if the ftrace_graph_return function pointer is not set to
+	 * the ftrace_stub entry, call prepare_ftrace_return().
+	 */
+	p0.l = _ftrace_graph_return;
+	p0.h = _ftrace_graph_return;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+
+	/* similarly, if the ftrace_graph_entry function pointer is not
+	 * set to the ftrace_graph_entry_stub entry, ...
+	 */
+	p0.l = _ftrace_graph_entry;
+	p0.h = _ftrace_graph_entry;
+	r2.l = _ftrace_graph_entry_stub;
+	r2.h = _ftrace_graph_entry_stub;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+#endif
+
+	r2 = [sp++];
+	rts;
+
+.Ldo_trace:
+
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* setup the tracer function */
+	p0 = r3;
+
+	/* tracer(ulong frompc, ulong selfpc):
+	 *  frompc: the pc that did the call to ...
+	 *  selfpc: ... this location
+	 * the selfpc itself will need adjusting for the mcount call
+	 */
+	r1 = rets;
+	r0 = [fp + 4];
+	r1 += -MCOUNT_INSN_SIZE;
+
+	/* call the tracer */
+	call (p0);
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(__mcount)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* The prepare_ftrace_return() function is similar to the trace function
+ * except it takes a pointer to the location of the frompc.  This is so
+ * the prepare_ftrace_return() can hijack it temporarily for probing
+ * purposes.
+ */
+ENTRY(_ftrace_graph_caller)
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	r0 = fp;
+	r1 = rets;
+	r0 += 4;
+	r1 += -MCOUNT_INSN_SIZE;
+	call _prepare_ftrace_return;
+
+	jump .Lfinish_trace;
+ENDPROC(_ftrace_graph_caller)
+
+/* Undo the rewrite caused by ftrace_graph_caller().  The common function
+ * ftrace_return_to_handler() will return the original rets so we can
+ * restore it and be on our way.
+ */
+ENTRY(_return_to_handler)
+	/* make sure original return values are saved */
+	[--sp] = p0;
+	[--sp] = r0;
+	[--sp] = r1;
+
+	/* get original return address */
+	call _ftrace_return_to_handler;
+	rets = r0;
+
+	/* anomaly 05000371 - make sure we have at least three instructions
+	 * between rets setting and the return
+	 */
+	r1 = [sp++];
+	r0 = [sp++];
+	p0 = [sp++];
+	rts;
+ENDPROC(_return_to_handler)
+#endif
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
new file mode 100644
index 00000000000..905bfc40a00
--- /dev/null
+++ b/arch/blackfin/kernel/ftrace.c
@@ -0,0 +1,42 @@
+/*
+ * ftrace graph code
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY)
+		return;
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		return;
+	}
+
+	/* all is well in the world !  hijack RETS ... */
+	*parent = return_hooker;
+}
+
+#endif
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index 3a3e9615b00..7281a91d26b 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -189,10 +189,10 @@ void set_gptimer_status(int group, uint32_t value)
 }
 EXPORT_SYMBOL(set_gptimer_status);
 
-uint16_t get_gptimer_intr(int timer_id)
+int get_gptimer_intr(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0;
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_intr);
 
@@ -203,10 +203,10 @@ void clear_gptimer_intr(int timer_id)
 }
 EXPORT_SYMBOL(clear_gptimer_intr);
 
-uint16_t get_gptimer_over(int timer_id)
+int get_gptimer_over(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0;
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_over);
 
@@ -217,6 +217,13 @@ void clear_gptimer_over(int timer_id)
 }
 EXPORT_SYMBOL(clear_gptimer_over);
 
+int get_gptimer_run(int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_run);
+
 void set_gptimer_config(int timer_id, uint16_t config)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
@@ -244,7 +251,7 @@ void enable_gptimers(uint16_t mask)
 }
 EXPORT_SYMBOL(enable_gptimers);
 
-void disable_gptimers(uint16_t mask)
+static void _disable_gptimers(uint16_t mask)
 {
 	int i;
 	uint16_t m = mask;
@@ -253,6 +260,12 @@ void disable_gptimers(uint16_t mask)
 		group_regs[i]->disable = m & 0xFF;
 		m >>= 8;
 	}
+}
+
+void disable_gptimers(uint16_t mask)
+{
+	int i;
+	_disable_gptimers(mask);
 	for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
 		if (mask & (1 << i))
 			group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
@@ -260,6 +273,13 @@ void disable_gptimers(uint16_t mask)
 }
 EXPORT_SYMBOL(disable_gptimers);
 
+void disable_gptimers_sync(uint16_t mask)
+{
+	_disable_gptimers(mask);
+	SSYNC();
+}
+EXPORT_SYMBOL(disable_gptimers_sync);
+
 void set_gptimer_pulse_hi(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index a5de8d45424..d8cde1fc5cb 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -99,7 +99,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-	this_domain = ipipe_current_domain;
+	this_domain = __ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
 		head = &this_domain->p_link;
@@ -167,7 +167,7 @@ int __ipipe_check_root(void)
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = desc->ic_prio;
+	int prio = __ipipe_get_irq_priority(irq);
 
 	desc->depth = 0;
 	if (ipd != &ipipe_root &&
@@ -178,8 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = desc->ic_prio;
+	int prio = __ipipe_get_irq_priority(irq);
 
 	if (ipd != &ipipe_root &&
 	    atomic_dec_and_test(&__ipipe_irq_lvdepth[prio]))
@@ -213,7 +212,9 @@ void __ipipe_unstall_root_raw(void)
 
 int __ipipe_syscall_root(struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p;
 	unsigned long flags;
+	int ret;
 
 	/*
 	 * We need to run the IRQ tail hook whenever we don't
@@ -232,29 +233,31 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 	/*
 	 * This routine either returns:
 	 * 0 -- if the syscall is to be passed to Linux;
-	 * 1 -- if the syscall should not be passed to Linux, and no
+	 * >0 -- if the syscall should not be passed to Linux, and no
 	 * tail work should be performed;
-	 * -1 -- if the syscall should not be passed to Linux but the
+	 * <0 -- if the syscall should not be passed to Linux but the
 	 * tail work has to be performed (for handling signals etc).
 	 */
 
-	if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) &&
-	    __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) {
-		if (ipipe_root_domain_p && !in_atomic()) {
-			/*
-			 * Sync pending VIRQs before _TIF_NEED_RESCHED
-			 * is tested.
-			 */
-			local_irq_save_hw(flags);
-			if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0)
-				__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
-			local_irq_restore_hw(flags);
-			return -1;
-		}
+	if (!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
+		return 0;
+
+	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
+
+	local_irq_save_hw(flags);
+
+	if (!__ipipe_root_domain_p) {
+		local_irq_restore_hw(flags);
 		return 1;
 	}
 
-	return 0;
+	p = ipipe_root_cpudom_ptr();
+	if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
+
+	local_irq_restore_hw(flags);
+
+	return -ret;
 }
 
 unsigned long ipipe_critical_enter(void (*syncfn) (void))
@@ -310,12 +313,16 @@ int ipipe_trigger_irq(unsigned irq)
 
 asmlinkage void __ipipe_sync_root(void)
 {
+	void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 	unsigned long flags;
 
 	BUG_ON(irqs_disabled());
 
 	local_irq_save_hw(flags);
 
+	if (irq_tail_hook)
+		irq_tail_hook();
+
 	clear_thread_flag(TIF_IRQ_SYNC);
 
 	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
@@ -326,9 +333,7 @@ asmlinkage void __ipipe_sync_root(void)
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct ipipe_domain *ipd = ipipe_current_domain;
-
-	if (ipd == ipipe_root_domain) {
+	if (__ipipe_root_domain_p) {
 		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
 			return;
 	}
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 401bd32aa49..6e31e935bb3 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -59,12 +59,14 @@ static struct irq_chip bad_chip = {
 	.unmask = dummy_mask_unmask_irq,
 };
 
+static int bad_stats;
 static struct irq_desc bad_irq_desc = {
 	.status = IRQ_DISABLED,
 	.chip = &bad_chip,
 	.handle_irq = handle_bad_irq,
 	.depth = 1,
 	.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
+	.kstat_irqs = &bad_stats,
 #ifdef CONFIG_SMP
 	.affinity = CPU_MASK_ALL
 #endif
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index b163f6d3330..da28f796ad7 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -466,7 +466,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
 	int cpu = raw_smp_processor_id();
 
 	if (size < 0)
-		return EFAULT;
+		return -EFAULT;
 	if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
 		return 0;
 	if (addr >= SYSMMR_BASE)
@@ -498,7 +498,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
 	if (IN_MEM(addr, size, L2_START, L2_LENGTH))
 		return 0;
 
-	return EFAULT;
+	return -EFAULT;
 }
 
 /*
@@ -508,14 +508,15 @@ static int validate_memory_access_address(unsigned long addr, int size)
 int kgdb_mem2hex(char *mem, char *buf, int count)
 {
 	char *tmp;
-	int err = 0;
+	int err;
 	unsigned char *pch;
 	unsigned short mmr16;
 	unsigned long mmr32;
 	int cpu = raw_smp_processor_id();
 
-	if (validate_memory_access_address((unsigned long)mem, count))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, count);
+	if (err)
+		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -533,7 +534,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 				*tmp++ = *pch++;
 				tmp -= 2;
 			} else
-				err = EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
@@ -545,10 +546,10 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 				*tmp++ = *pch++;
 				tmp -= 4;
 			} else
-				err = EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			err = EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -557,7 +558,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 		) {
 		/* access L1 instruction SRAM*/
 		if (dma_memcpy(tmp, mem, count) == NULL)
-			err = EFAULT;
+			err = -EFAULT;
 	} else
 		err = probe_kernel_read(tmp, mem, count);
 
@@ -585,24 +586,24 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 	char *tmp_new;
 	unsigned short *mmr16;
 	unsigned long *mmr32;
-	int err = 0;
-	int size = 0;
+	int err;
+	int size;
 	int cpu = raw_smp_processor_id();
 
 	tmp_old = tmp_new = buf;
 
-	while (count-- > 0) {
+	for (size = 0; size < count; ++size) {
 		if (*tmp_old == 0x7d)
 			*tmp_new = *(++tmp_old) ^ 0x20;
 		else
 			*tmp_new = *tmp_old;
 		tmp_new++;
 		tmp_old++;
-		size++;
 	}
 
-	if (validate_memory_access_address((unsigned long)mem, size))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, size);
+	if (err)
+		return err;
 
 	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
 		switch (size) {
@@ -611,17 +612,17 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 				mmr16 = (unsigned short *)buf;
 				*(unsigned short *)mem = *mmr16;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
 				mmr32 = (unsigned long *)buf;
 				*(unsigned long *)mem = *mmr32;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			return EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -630,7 +631,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 		) {
 		/* access L1 instruction SRAM */
 		if (dma_memcpy(mem, buf, size) == NULL)
-			err = EFAULT;
+			err = -EFAULT;
 	} else
 		err = probe_kernel_write(mem, buf, size);
 
@@ -648,10 +649,12 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 	char *tmp_hex;
 	unsigned short *mmr16;
 	unsigned long *mmr32;
+	int err;
 	int cpu = raw_smp_processor_id();
 
-	if (validate_memory_access_address((unsigned long)mem, count))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, count);
+	if (err)
+		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -673,17 +676,17 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 				mmr16 = (unsigned short *)tmp_raw;
 				*(unsigned short *)mem = *mmr16;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
 				mmr32 = (unsigned long *)tmp_raw;
 				*(unsigned long *)mem = *mmr32;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			return EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -692,10 +695,11 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 		) {
 		/* access L1 instruction SRAM */
 		if (dma_memcpy(mem, tmp_raw, count) == NULL)
-			return EFAULT;
+			err = -EFAULT;
 	} else
-		return probe_kernel_write(mem, tmp_raw, count);
-	return 0;
+		err = probe_kernel_write(mem, tmp_raw, count);
+
+	return err;
 }
 
 int kgdb_validate_break_address(unsigned long addr)
@@ -715,7 +719,7 @@ int kgdb_validate_break_address(unsigned long addr)
 	if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH))
 		return 0;
 
-	return EFAULT;
+	return -EFAULT;
 }
 
 int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 1bd7f2d018a..d5aee362668 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -201,8 +201,8 @@ apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 /*            Arithmetic relocations are handled.                        */
 /*            We do not expect LSETUP to be split and hence is not       */
 /*            handled.                                                   */
-/*            R_byte and R_byte2 are also not handled as the gas         */
-/*            does not generate it.                                      */
+/*            R_BFIN_BYTE and R_BFIN_BYTE2 are also not handled as the   */
+/*            gas does not generate it.                                  */
 /*************************************************************************/
 int
 apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
@@ -243,8 +243,8 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 #endif
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
-		case R_pcrel24:
-		case R_pcrel24_jump_l:
+		case R_BFIN_PCREL24:
+		case R_BFIN_PCREL24_JUMP_L:
 			/* Add the value, subtract its postition */
 			location16 =
 			    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
@@ -266,18 +266,18 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			    (*location16 & 0xff00) | (value >> 16 & 0x00ff);
 			*(location16 + 1) = value & 0xffff;
 			break;
-		case R_pcrel12_jump:
-		case R_pcrel12_jump_s:
+		case R_BFIN_PCREL12_JUMP:
+		case R_BFIN_PCREL12_JUMP_S:
 			value -= (uint32_t) location32;
 			value >>= 1;
 			*location16 = (value & 0xfff);
 			break;
-		case R_pcrel10:
+		case R_BFIN_PCREL10:
 			value -= (uint32_t) location32;
 			value >>= 1;
 			*location16 = (value & 0x3ff);
 			break;
-		case R_luimm16:
+		case R_BFIN_LUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       (value & 0xffff));
 			tmp = (value & 0xffff);
@@ -286,7 +286,7 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			} else
 				*location16 = tmp;
 			break;
-		case R_huimm16:
+		case R_BFIN_HUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       ((value >> 16) & 0xffff));
 			tmp = ((value >> 16) & 0xffff);
@@ -295,10 +295,10 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			} else
 				*location16 = tmp;
 			break;
-		case R_rimm16:
+		case R_BFIN_RIMM16:
 			*location16 = (value & 0xffff);
 			break;
-		case R_byte4_data:
+		case R_BFIN_BYTE4_DATA:
 			pr_debug("before %x after %x\n", *location32, value);
 			*location32 = value;
 			break;
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index e040e03335e..30d0843ed70 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -322,6 +322,9 @@ void finish_atomic_sections (struct pt_regs *regs)
 }
 
 #if defined(CONFIG_ACCESS_CHECK)
+#ifdef CONFIG_ACCESS_OK_L1
+__attribute__((l1_text))
+#endif
 /* Return 1 if access to memory range is OK, 0 otherwise */
 int _access_ok(unsigned long addr, unsigned long size)
 {
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index a58687bdee6..6454babdfaf 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -18,9 +18,12 @@
 #include <linux/tty.h>
 #include <linux/pfn.h>
 
+#ifdef CONFIG_MTD_UCLINUX
+#include <linux/mtd/map.h>
 #include <linux/ext2_fs.h>
 #include <linux/cramfs_fs.h>
 #include <linux/romfs_fs.h>
+#endif
 
 #include <asm/cplb.h>
 #include <asm/cacheflush.h>
@@ -45,6 +48,7 @@ EXPORT_SYMBOL(_ramend);
 EXPORT_SYMBOL(reserved_mem_dcache_on);
 
 #ifdef CONFIG_MTD_UCLINUX
+extern struct map_info uclinux_ram_map;
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
 unsigned long _ebss;
 EXPORT_SYMBOL(memory_mtd_end);
@@ -150,40 +154,45 @@ void __init bfin_relocate_l1_mem(void)
 	unsigned long l1_data_b_length;
 	unsigned long l2_length;
 
+	/*
+	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
+	 * we know that everything about l1 text/data is nice and aligned,
+	 * so copy by 4 byte chunks, and don't worry about overlapping
+	 * src/dest.
+	 *
+	 * We can't use the dma_memcpy functions, since they can call
+	 * scheduler functions which might be in L1 :( and core writes
+	 * into L1 instruction cause bad access errors, so we are stuck,
+	 * we are required to use DMA, but can't use the common dma
+	 * functions. We can't use memcpy either - since that might be
+	 * going to be in the relocated L1
+	 */
+
 	blackfin_dma_early_init();
 
+	/* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
 	l1_code_length = _etext_l1 - _stext_l1;
-	if (l1_code_length > L1_CODE_LENGTH)
-		panic("L1 Instruction SRAM Overflow\n");
-	/* cannot complain as printk is not available as yet.
-	 * But we can continue booting and complain later!
-	 */
-
-	/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
-	dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+	if (l1_code_length)
+		early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
 
+	/* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
 	l1_data_a_length = _sbss_l1 - _sdata_l1;
-	if (l1_data_a_length > L1_DATA_A_LENGTH)
-		panic("L1 Data SRAM Bank A Overflow\n");
-
-	/* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
-	dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+	if (l1_data_a_length)
+		early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
 
+	/* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
 	l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
-	if (l1_data_b_length > L1_DATA_B_LENGTH)
-		panic("L1 Data SRAM Bank B Overflow\n");
-
-	/* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
-	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+	if (l1_data_b_length)
+		early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
 
+	early_dma_memcpy_done();
+
+	/* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
 	if (L2_LENGTH != 0) {
 		l2_length = _sbss_l2 - _stext_l2;
-		if (l2_length > L2_LENGTH)
-			panic("L2 SRAM Overflow\n");
-
-		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
-		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+		if (l2_length)
+			memcpy(_stext_l2, _l2_lma_start, l2_length);
 	}
 }
 
@@ -472,7 +481,7 @@ static __init void memory_setup(void)
 
 	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
 		console_init();
-		panic("DMA region exceeds memory limit: %lu.\n",
+		panic("DMA region exceeds memory limit: %lu.",
 			_ramend - _ramstart);
 	}
 	memory_end = _ramend - DMA_UNCACHED_REGION;
@@ -526,14 +535,13 @@ static __init void memory_setup(void)
 
 	if (mtd_size == 0) {
 		console_init();
-		panic("Don't boot kernel without rootfs attached.\n");
+		panic("Don't boot kernel without rootfs attached.");
 	}
 
 	/* Relocate MTD image to the top of memory after the uncached memory area */
-	dma_memcpy((char *)memory_end, _end, mtd_size);
-
-	memory_mtd_start = memory_end;
-	_ebss = memory_mtd_start;	/* define _ebss for compatible */
+	uclinux_ram_map.phys = memory_mtd_start = memory_end;
+	uclinux_ram_map.size = mtd_size;
+	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
@@ -796,10 +804,8 @@ void __init setup_arch(char **cmdline_p)
 	cclk = get_cclk();
 	sclk = get_sclk();
 
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
-	if (ANOMALY_05000273 && cclk == sclk)
-		panic("ANOMALY 05000273, SCLK can not be same as CCLK");
-#endif
+	if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
+		panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
 
 #ifdef BF561_FAMILY
 	if (ANOMALY_05000266) {
@@ -881,7 +887,7 @@ void __init setup_arch(char **cmdline_p)
 				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
 				       bfin_compiled_revid(), bfin_revid());
 				if (bfin_compiled_revid() > bfin_revid())
-					panic("Error: you are missing anomaly workarounds for this rev\n");
+					panic("Error: you are missing anomaly workarounds for this rev");
 			}
 		}
 		if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
@@ -891,16 +897,13 @@ void __init setup_arch(char **cmdline_p)
 
 	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
 	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448\n");
+		panic("You can't run on this processor due to 05000448");
 
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
 	       cclk / 1000000, sclk / 1000000);
 
-	if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
-		printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-
 	setup_bootmem_allocator();
 
 	paging_init();
@@ -1095,7 +1098,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			CPUID, bfin_cpuid());
 
 	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
-		"stepping\t: %d\n",
+		"stepping\t: %d ",
 		cpu, cclk/1000000, sclk/1000000,
 #ifdef CONFIG_MPU
 		"mpu on",
@@ -1104,7 +1107,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #endif
 		revid);
 
-	seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+	if (bfin_revid() != bfin_compiled_revid()) {
+		if (bfin_compiled_revid() == -1)
+			seq_printf(m, "(Compiled for Rev none)");
+		else if (bfin_compiled_revid() == 0xffff)
+			seq_printf(m, "(Compiled for Rev any)");
+		else
+			seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
+	}
+
+	seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
 		cclk/1000000, cclk%1000000,
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
@@ -1169,6 +1181,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #ifdef __ARCH_SYNC_CORE_DCACHE
 	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
 #endif
+#ifdef __ARCH_SYNC_CORE_ICACHE
+	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+#endif
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 	switch ((cpudata->imemctl >> 3) & WAYALL_L) {
 	case WAY0_L:
diff --git a/arch/blackfin/kernel/stacktrace.c b/arch/blackfin/kernel/stacktrace.c
new file mode 100644
index 00000000000..30301e1eace
--- /dev/null
+++ b/arch/blackfin/kernel/stacktrace.c
@@ -0,0 +1,53 @@
+/*
+ * Blackfin stacktrace code (mostly copied from avr32)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+
+register unsigned long current_frame_pointer asm("FP");
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long rets;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long low, high;
+	unsigned long fp;
+	struct stackframe *frame;
+	int skip = trace->skip;
+
+	low = (unsigned long)task_stack_page(current);
+	high = low + THREAD_SIZE;
+	fp = current_frame_pointer;
+
+	while (fp >= low && fp <= (high - sizeof(*frame))) {
+		frame = (struct stackframe *)fp;
+
+		if (skip) {
+			skip--;
+		} else {
+			trace->entries[trace->nr_entries++] = frame->rets;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+
+		/*
+		 * The next frame must be at a higher address than the
+		 * current frame.
+		 */
+		low = fp + sizeof(*frame);
+		fp = frame->fp;
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index fce49d7cf00..a8f1329c15a 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -78,11 +78,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return do_mmap2(addr, len, prot, flags, fd, pgoff);
 }
 
-asmlinkage int sys_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
 asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
 {
 	return sram_alloc_with_lsl(size, flags);
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 27646121280..0791eba40d9 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -20,8 +20,9 @@
 
 #include <asm/blackfin.h>
 #include <asm/time.h>
+#include <asm/gptimers.h>
 
-#ifdef CONFIG_CYCLES_CLOCKSOURCE
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
@@ -58,15 +59,15 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-static cycle_t read_cycles(struct clocksource *cs)
+static cycle_t bfin_read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
-static struct clocksource clocksource_bfin = {
-	.name		= "bfin_cycles",
+static struct clocksource bfin_cs_cycles = {
+	.name		= "bfin_cs_cycles",
 	.rating		= 350,
-	.read		= read_cycles,
+	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.shift		= 22,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -74,53 +75,198 @@ static struct clocksource clocksource_bfin = {
 
 unsigned long long sched_clock(void)
 {
-	return cycles_2_ns(read_cycles(&clocksource_bfin));
+	return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles));
 }
 
-static int __init bfin_clocksource_init(void)
+static int __init bfin_cs_cycles_init(void)
 {
 	set_cyc2ns_scale(get_cclk() / 1000);
 
-	clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift);
+	bfin_cs_cycles.mult = \
+		clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
 
-	if (clocksource_register(&clocksource_bfin))
+	if (clocksource_register(&bfin_cs_cycles))
 		panic("failed to register clocksource");
 
 	return 0;
 }
+#else
+# define bfin_cs_cycles_init()
+#endif
+
+#ifdef CONFIG_GPTMR0_CLOCKSOURCE
+
+void __init setup_gptimer0(void)
+{
+	disable_gptimers(TIMER0bit);
+
+	set_gptimer_config(TIMER0_id, \
+		TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+	set_gptimer_period(TIMER0_id, -1);
+	set_gptimer_pwidth(TIMER0_id, -2);
+	SSYNC();
+	enable_gptimers(TIMER0bit);
+}
+
+static cycle_t bfin_read_gptimer0(void)
+{
+	return bfin_read_TIMER0_COUNTER();
+}
+
+static struct clocksource bfin_cs_gptimer0 = {
+	.name		= "bfin_cs_gptimer0",
+	.rating		= 400,
+	.read		= bfin_read_gptimer0,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 22,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bfin_cs_gptimer0_init(void)
+{
+	setup_gptimer0();
 
+	bfin_cs_gptimer0.mult = \
+		clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
+
+	if (clocksource_register(&bfin_cs_gptimer0))
+		panic("failed to register clocksource");
+
+	return 0;
+}
 #else
-# define bfin_clocksource_init()
+# define bfin_cs_gptimer0_init()
 #endif
 
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static int bfin_timer_set_next_event(unsigned long, \
+		struct clock_event_device *);
+
+static void bfin_timer_set_mode(enum clock_event_mode, \
+		struct clock_event_device *);
+
+static struct clock_event_device clockevent_bfin = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	.name		= "bfin_gptimer0",
+	.rating		= 300,
+	.irq		= IRQ_TIMER0,
+#else
+	.name		= "bfin_core_timer",
+	.rating		= 350,
+	.irq		= IRQ_CORETMR,
+#endif
+	.shift		= 32,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = bfin_timer_set_next_event,
+	.set_mode	= bfin_timer_set_mode,
+};
+
+static struct irqaction bfin_timer_irq = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	.name		= "Blackfin GPTimer0",
+#else
+	.name		= "Blackfin CoreTimer",
+#endif
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= timer_interrupt,
+	.dev_id		= &clockevent_bfin,
+};
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 static int bfin_timer_set_next_event(unsigned long cycles,
                                      struct clock_event_device *evt)
 {
+	disable_gptimers(TIMER0bit);
+
+	/* it starts counting three SCLK cycles after the TIMENx bit is set */
+	set_gptimer_pwidth(TIMER0_id, cycles - 3);
+	enable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static void bfin_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC: {
+		set_gptimer_config(TIMER0_id, \
+			TIMER_OUT_DIS | TIMER_IRQ_ENA | \
+			TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+		set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+		set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+		enable_gptimers(TIMER0bit);
+		break;
+	}
+	case CLOCK_EVT_MODE_ONESHOT:
+		disable_gptimers(TIMER0bit);
+		set_gptimer_config(TIMER0_id, \
+			TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+		set_gptimer_period(TIMER0_id, 0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		disable_gptimers(TIMER0bit);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static void bfin_timer_ack(void)
+{
+	set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
+}
+
+static void __init bfin_timer_init(void)
+{
+	disable_gptimers(TIMER0bit);
+}
+
+static unsigned long  __init bfin_clockevent_check(void)
+{
+	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
+	return get_sclk();
+}
+
+#else /* CONFIG_TICKSOURCE_CORETMR */
+
+static int bfin_timer_set_next_event(unsigned long cycles,
+				struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
 	bfin_write_TCOUNT(cycles);
 	CSYNC();
+	bfin_write_TCNTL(TMPWR | TMREN);
 	return 0;
 }
 
 static void bfin_timer_set_mode(enum clock_event_mode mode,
-                                struct clock_event_device *evt)
+				struct clock_event_device *evt)
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC: {
 		unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
 		bfin_write_TCNTL(TMPWR);
-		bfin_write_TSCALE(TIME_SCALE - 1);
 		CSYNC();
+		bfin_write_TSCALE(TIME_SCALE - 1);
 		bfin_write_TPERIOD(tcount);
 		bfin_write_TCOUNT(tcount);
-		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
 		CSYNC();
+		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
 		break;
 	}
 	case CLOCK_EVT_MODE_ONESHOT:
+		bfin_write_TCNTL(TMPWR);
+		CSYNC();
 		bfin_write_TSCALE(TIME_SCALE - 1);
+		bfin_write_TPERIOD(0);
 		bfin_write_TCOUNT(0);
-		bfin_write_TCNTL(TMPWR | TMREN);
-		CSYNC();
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
@@ -132,6 +278,10 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
+static void bfin_timer_ack(void)
+{
+}
+
 static void __init bfin_timer_init(void)
 {
 	/* power up the timer, but don't enable it just yet */
@@ -145,38 +295,32 @@ static void __init bfin_timer_init(void)
 	bfin_write_TPERIOD(0);
 	bfin_write_TCOUNT(0);
 
-	/* now enable the timer */
 	CSYNC();
 }
 
+static unsigned long  __init bfin_clockevent_check(void)
+{
+	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+	return get_cclk() / TIME_SCALE;
+}
+
+void __init setup_core_timer(void)
+{
+	bfin_timer_init();
+	bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-static struct clock_event_device clockevent_bfin = {
-	.name		= "bfin_core_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event = bfin_timer_set_next_event,
-	.set_mode	= bfin_timer_set_mode,
-};
-
-static struct irqaction bfin_timer_irq = {
-	.name		= "Blackfin Core Timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &clockevent_bfin,
-};
-
 irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = dev_id;
+	smp_mb();
 	evt->event_handler(evt);
+	bfin_timer_ack();
 	return IRQ_HANDLED;
 }
 
@@ -184,9 +328,8 @@ static int __init bfin_clockevent_init(void)
 {
 	unsigned long timer_clk;
 
-	timer_clk = get_cclk() / TIME_SCALE;
+	timer_clk = bfin_clockevent_check();
 
-	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
 	bfin_timer_init();
 
 	clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
@@ -218,6 +361,7 @@ void __init time_init(void)
 	xtime.tv_nsec = 0;
 	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
-	bfin_clocksource_init();
+	bfin_cs_cycles_init();
+	bfin_cs_gptimer0_init();
 	bfin_clockevent_init();
 }
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 1bbacfbd4c5..adb54aa7d7c 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -24,14 +24,10 @@
 
 static struct irqaction bfin_timer_irq = {
 	.name = "Blackfin Timer Tick",
-#ifdef CONFIG_IRQ_PER_CPU
-	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#else
 	.flags = IRQF_DISABLED
-#endif
 };
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 void __init setup_system_timer0(void)
 {
 	/* Power down the core timer, just to play safe. */
@@ -74,7 +70,7 @@ void __init setup_core_timer(void)
 static void __init
 time_sched_init(irqreturn_t(*timer_routine) (int, void *))
 {
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 	setup_system_timer0();
 	bfin_timer_irq.handler = timer_routine;
 	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
@@ -94,7 +90,7 @@ static unsigned long gettimeoffset(void)
 	unsigned long offset;
 	unsigned long clocks_per_jiffy;
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 	clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
 	offset = bfin_read_TIMER0_COUNTER() / \
 		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
@@ -133,36 +129,25 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 	static long last_rtc_update;
 
 	write_seqlock(&xtime_lock);
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
+	do_timer(1);
+
 	/*
-	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
-	 * enabled.
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
-#endif
-		do_timer(1);
-
-		/*
-		 * If we have an externally synchronized Linux clock, then update
-		 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-		 * called as close as possible to 500 ms before the new second starts.
-		 */
-		if (ntp_synced() &&
-		    xtime.tv_sec > last_rtc_update + 660 &&
-		    (xtime.tv_nsec / NSEC_PER_USEC) >=
-		    500000 - ((unsigned)TICK_SIZE) / 2
-		    && (xtime.tv_nsec / NSEC_PER_USEC) <=
-		    500000 + ((unsigned)TICK_SIZE) / 2) {
-			if (set_rtc_mmss(xtime.tv_sec) == 0)
-				last_rtc_update = xtime.tv_sec;
-			else
-				/* Do it again in 60s. */
-				last_rtc_update = xtime.tv_sec - 600;
-		}
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-		set_gptimer_status(0, TIMER_STATUS_TIMIL0);
+	if (ntp_synced() &&
+	    xtime.tv_sec > last_rtc_update + 660 &&
+	    (xtime.tv_nsec / NSEC_PER_USEC) >=
+	    500000 - ((unsigned)TICK_SIZE) / 2
+	    && (xtime.tv_nsec / NSEC_PER_USEC) <=
+	    500000 + ((unsigned)TICK_SIZE) / 2) {
+		if (set_rtc_mmss(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else
+			/* Do it again in 60s. */
+			last_rtc_update = xtime.tv_sec - 600;
 	}
-#endif
 	write_sequnlock(&xtime_lock);
 
 #ifdef CONFIG_IPIPE
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index ffe7fb53ecc..d279552fe9b 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -27,6 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/bug.h>
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -68,6 +69,13 @@
 	({ if (0) printk(fmt, ##arg); 0; })
 #endif
 
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+u32 last_seqstat;
+#ifdef CONFIG_DEBUG_MMRS_MODULE
+EXPORT_SYMBOL(last_seqstat);
+#endif
+#endif
+
 /* Initiate the event table handler */
 void __init trap_init(void)
 {
@@ -79,7 +87,6 @@ void __init trap_init(void)
 static void decode_address(char *buf, unsigned long address)
 {
 #ifdef CONFIG_DEBUG_VERBOSE
-	struct vm_list_struct *vml;
 	struct task_struct *p;
 	struct mm_struct *mm;
 	unsigned long flags, offset;
@@ -196,6 +203,11 @@ done:
 
 asmlinkage void double_fault_c(struct pt_regs *fp)
 {
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int j;
+	trace_buffer_save(j);
+#endif
+
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
@@ -220,10 +232,16 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
+		dump_bfin_trace_buffer();
 	}
 #endif
-	panic("Double Fault - unrecoverable event\n");
+	panic("Double Fault - unrecoverable event");
+
+}
 
+static int kernel_mode_regs(struct pt_regs *regs)
+{
+	return regs->ipend & 0xffc0;
 }
 
 asmlinkage void trap_c(struct pt_regs *fp)
@@ -234,37 +252,24 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	unsigned int cpu = smp_processor_id();
 #endif
+	const char *strerror = NULL;
 	int sig = 0;
 	siginfo_t info;
 	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
 
 	trace_buffer_save(j);
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+	last_seqstat = (u32)fp->seqstat;
+#endif
 
 	/* Important - be very careful dereferncing pointers - will lead to
 	 * double faults if the stack has become corrupt
 	 */
 
-	/* If the fault was caused by a kernel thread, or interrupt handler
-	 * we will kernel panic, so the system reboots.
-	 * If KGDB is enabled, don't set this for kernel breakpoints
-	*/
-
-	/* TODO: check to see if we are in some sort of deferred HWERR
-	 * that we should be able to recover from, not kernel panic
-	 */
-	if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP)
-#ifdef CONFIG_KGDB
-		&& (trapnr != VEC_EXCPT02)
+#ifndef CONFIG_KGDB
+	/* IPEND is skipped if KGDB isn't enabled (see entry code) */
+	fp->ipend = bfin_read_IPEND();
 #endif
-	){
-		console_verbose();
-		oops_in_progress = 1;
-	} else if (current) {
-		if (current->mm == NULL) {
-			console_verbose();
-			oops_in_progress = 1;
-		}
-	}
 
 	/* trap_c() will be called for exceptions. During exceptions
 	 * processing, the pc value should be set with retx value.
@@ -292,15 +297,15 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a breakpoint in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 	/* 0x03 - User Defined, userspace stack overflow */
 	case VEC_EXCPT03:
 		info.si_code = SEGV_STACKFLOW;
 		sig = SIGSEGV;
-		verbose_printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x02 - KGDB initial connection and break signal trap */
@@ -309,7 +314,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		info.si_code = TRAP_ILLTRAP;
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP();
-		return;
+		goto traps_done;
 #endif
 	/* 0x04 - User Defined */
 	/* 0x05 - User Defined */
@@ -329,7 +334,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_EXCPT04 ... VEC_EXCPT15:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x04(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x10 HW Single step, handled here */
@@ -338,15 +343,15 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a single step in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 	/* 0x11 - Trace Buffer Full, handled here */
 	case VEC_OVFLOW:
 		info.si_code = TRAP_TRACEFLOW;
 		sig = SIGTRAP;
-		verbose_printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x12 - Reserved, Caught by default */
@@ -366,37 +371,54 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x20 - Reserved, Caught by default */
 	/* 0x21 - Undefined Instruction, handled here */
 	case VEC_UNDEF_I:
+#ifdef CONFIG_BUG
+		if (kernel_mode_regs(fp)) {
+			switch (report_bug(fp->pc, fp)) {
+			case BUG_TRAP_TYPE_NONE:
+				break;
+			case BUG_TRAP_TYPE_WARN:
+				dump_bfin_trace_buffer();
+				fp->pc += 2;
+				goto traps_done;
+			case BUG_TRAP_TYPE_BUG:
+				/* call to panic() will dump trace, and it is
+				 * off at this point, so it won't be clobbered
+				 */
+				panic("BUG()");
+			}
+		}
+#endif
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x22 - Illegal Instruction Combination, handled here */
 	case VEC_ILGAL_I:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x23 - Data CPLB protection violation, handled here */
 	case VEC_CPLB_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x24 - Data access misaligned, handled here */
 	case VEC_MISALI_D:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x25 - Unrecoverable Event, handled here */
 	case VEC_UNCOV:
 		info.si_code = ILL_ILLEXCPT;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
@@ -404,7 +426,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_CPLB_M:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE);
 		break;
 	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
 	case VEC_CPLB_MHIT:
@@ -412,10 +434,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "NULL pointer access\n");
+			strerror = KERN_NOTICE "NULL pointer access\n";
 		else
 #endif
-			verbose_printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+			strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x28 - Emulation Watchpoint, handled here */
@@ -425,8 +447,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		pr_debug(EXC_0x28(KERN_DEBUG));
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a watchpoint in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 #ifdef CONFIG_BF535
@@ -434,7 +456,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
 		info.si_code = BUS_OPFETCH;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
+		strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n";
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 #else
@@ -444,21 +466,21 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_MISALI_I:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2B - Instruction CPLB protection violation, handled here */
 	case VEC_CPLB_I_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
 	case VEC_CPLB_I_M:
 		info.si_code = ILL_CPLB_MISS;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE);
 		break;
 	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
 	case VEC_CPLB_I_MHIT:
@@ -466,17 +488,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "Jump to NULL address\n");
+			strerror = KERN_NOTICE "Jump to NULL address\n";
 		else
 #endif
-			verbose_printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+			strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2E - Illegal use of Supervisor Resource, handled here */
 	case VEC_ILL_RES:
 		info.si_code = ILL_PRVOPC;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2F - Reserved, Caught by default */
@@ -504,17 +526,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
 			info.si_code = BUS_ADRALN;
 			sig = SIGBUS;
-			verbose_printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x2(KERN_NOTICE);
 			break;
 		/* External Memory Addressing Error */
 		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
 			info.si_code = BUS_ADRERR;
 			sig = SIGBUS;
-			verbose_printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
 			break;
 		/* Performance Monitor Overflow */
 		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
-			verbose_printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x12(KERN_NOTICE);
 			break;
 		/* RAISE 5 instruction */
 		case (SEQSTAT_HWERRCAUSE_RAISE_5):
@@ -531,7 +553,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * if we get here we hit a reserved one, so panic
 	 */
 	default:
-		oops_in_progress = 1;
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
 		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
@@ -542,6 +563,16 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 	BUG_ON(sig == 0);
 
+	/* If the fault was caused by a kernel thread, or interrupt handler
+	 * we will kernel panic, so the system reboots.
+	 */
+	if (kernel_mode_regs(fp) || (current && !current->mm)) {
+		console_verbose();
+		oops_in_progress = 1;
+		if (strerror)
+			verbose_printk(strerror);
+	}
+
 	if (sig != SIGTRAP) {
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
@@ -588,8 +619,11 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
+	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+		fp->pc = SAFE_USER_INSTRUCTION;
+
+ traps_done:
 	trace_buffer_restore(j);
-	return;
 }
 
 /* Typical exception handling routines	*/
@@ -774,6 +808,18 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned short opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
 /*
  * Checks to see if the address pointed to is either a
  * 16-bit CALL instruction, or a 32-bit CALL instruction
@@ -832,6 +878,11 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	decode_address(buf, (unsigned int)stack);
 	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
 
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
 	/* First thing is to look for a frame pointer */
 	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
 		if (*addr & 0x1)
@@ -1066,6 +1117,29 @@ void show_regs(struct pt_regs *fp)
 	unsigned int cpu = smp_processor_id();
 	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
+	verbose_printk(KERN_NOTICE "\n");
+	if (CPUID != bfin_cpuid())
+		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		verbose_printk("(Detected 0.%d)", bfin_revid());
+
+	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	verbose_printk(KERN_NOTICE "%s", linux_banner);
+
 	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
 		(long)fp->seqstat, fp->ipend, fp->syscfg);
@@ -1246,5 +1320,5 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_stack();
-	panic("Unrecoverable event\n");
+	panic("Unrecoverable event");
 }
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 27952ae047d..6ac307ca0d8 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -50,8 +50,11 @@ SECTIONS
 		_text = .;
 		__stext = .;
 		TEXT_TEXT
+#ifndef CONFIG_SCHEDULE_L1
 		SCHED_TEXT
+#endif
 		LOCK_TEXT
+		IRQENTRY_TEXT
 		KPROBES_TEXT
 		*(.text.*)
 		*(.fixup)
@@ -164,6 +167,20 @@ SECTIONS
 	}
 	PERCPU(4)
 	SECURITY_INIT
+
+	/* we have to discard exit text and such at runtime, not link time, to
+	 * handle embedded cross-section references (alt instructions, bug
+	 * table, eh_frame, etc...)
+	 */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+	.exit.data :
+	{
+		EXIT_DATA
+	}
+
 	.init.ramfs :
 	{
 		. = ALIGN(4);
@@ -180,6 +197,9 @@ SECTIONS
 		. = ALIGN(4);
 		__stext_l1 = .;
 		*(.l1.text)
+#ifdef CONFIG_SCHEDULE_L1
+		SCHED_TEXT
+#endif
 		. = ALIGN(4);
 		__etext_l1 = .;
 	}
@@ -259,8 +279,6 @@ SECTIONS
 
 	/DISCARD/ :
 	{
-		EXIT_TEXT
-		EXIT_DATA
 		*(.exitcall.exit)
 	}
 }
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
index 762a7f02970..cd605e7d851 100644
--- a/arch/blackfin/lib/checksum.c
+++ b/arch/blackfin/lib/checksum.c
@@ -116,6 +116,7 @@ __sum16 ip_compute_csum(const void *buff, int len)
 {
 	return (__force __sum16)~do_csum(buff, len);
 }
+EXPORT_SYMBOL(ip_compute_csum);
 
 /*
  * copy from fs while checksumming, otherwise like csum_partial
@@ -130,6 +131,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 	memcpy(dst, (__force void *)src, len);
 	return csum_partial(dst, len, sum);
 }
+EXPORT_SYMBOL(csum_partial_copy_from_user);
 
 /*
  * copy from ds while checksumming, otherwise like csum_partial
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index f397ede006b..4c76fefb7a3 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -156,6 +156,7 @@ config IRQ_PORTH_INTB
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 41f2eacfef2..1382f038235 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -82,7 +82,11 @@ static struct physmap_flash_data ezbrd_flash_data = {
 
 static struct resource ezbrd_flash_resource = {
 	.start = 0x20000000,
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	.end   = 0x202fffff,
+#else
 	.end   = 0x203fffff,
+#endif
 	.flags = IORESOURCE_MEM,
 };
 
@@ -162,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -242,15 +246,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "m25p80", /* Name of spi_driver for this device */
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */
 		.platform_data = &bfin_spi_flash_data,
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -365,6 +369,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -395,6 +404,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -514,7 +528,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -678,6 +692,11 @@ static int __init ezbrd_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
+	peripheral_request(P_AMS2, "ParaFlash");
+#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE)
+	peripheral_request(P_AMS3, "ParaFlash");
+#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index c847bb10107..b69bd9af38d 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -6,14 +6,19 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
+/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF518 silicon version
+#endif
+
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
@@ -47,7 +52,7 @@
 #define ANOMALY_05000435 (1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
 #define ANOMALY_05000438 (1)
-/* Preboot Cannot be Used to Program the PLL_DIV Register */
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
 #define ANOMALY_05000439 (1)
 /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
 #define ANOMALY_05000440 (1)
@@ -61,32 +66,56 @@
 #define ANOMALY_05000453 (1)
 /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
 #define ANOMALY_05000455 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000119 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index f618b487b2b..a0fc77fd331 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -185,6 +185,10 @@
 #define P_PTP_PPS		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
 #define P_PTP_CLKOUT		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
 
-#define P_HWAIT		(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
+/* AMS */
+#define P_AMS2			(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_AMS3			(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
 
 #endif				/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 8438ec6d667..848ac6f8682 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -170,6 +170,7 @@ config IRQ_PORTH_INTB
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 48e69eecdba..1eaf27ff722 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -664,6 +664,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -789,7 +794,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 7fe480e4ebe..9f9c0005dcf 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -467,6 +467,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -586,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index d0864111ef5..3e5b7db6b06 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -509,6 +509,13 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_PBX)
 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 	.ctl_reg	= 0x4, /* send zero */
@@ -593,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -624,6 +631,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 3,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+
 #if defined(CONFIG_PBX)
 	{
 		.modalias = "fxs-spi",
@@ -705,6 +723,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -836,7 +859,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index df6808d8a6e..c84ddea9574 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -6,14 +6,19 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
- *  - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
+/* This file should be up to date with:
+ *  - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+/* We do not support old silicon - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF526/BF527 silicon version
+#endif
+
 #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
 # define ANOMALY_BF526 1
 #else
@@ -25,158 +30,203 @@
 # define ANOMALY_BF527 0
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
+#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
+#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
-#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
+/* Host DMA Boot Modes Are Not Functional */
+#define ANOMALY_05000330 (__SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
 /* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
 /* Security Features Are Not Functional */
-#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
 /* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (ANOMALY_BF526)
+#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
+#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Incorrect Default CSEL Value in PLL_DIV */
-#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
 /* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
 /* 8-Bit NAND Flash Boot Mode Not Functional */
-#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
-/* Host Must Not Read Back During Host DMA Boot */
-#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Boot from OTP Memory Not Functional */
-#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Routine Not Functional */
-#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
 /* Programmable Preboot Settings Not Functional */
-#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
 /* CRC32 Checksum Support Not Functional */
-#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
 /* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
 /* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
 /* Log Buffer Not Functional */
-#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
 /* Hook Routine Not Functional */
-#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
 /* Header Indirect Bit Not Functional */
-#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
 /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
-#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
 /* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
-#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
 /* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
-#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Firmware Does Not Save/Restore Full Context */
 #define ANOMALY_05000405 (1)
 /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
 #define ANOMALY_05000408 (1)
 /* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Default Internal Voltage Regulator Setting */
-#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* DEB2_URGENT Bit Not Functional */
-#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
 #define ANOMALY_05000416 (1)
 /* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
-#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
-/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
-#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
+/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
-#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
 #define ANOMALY_05000421 (1)
 /* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
-#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
 /* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
-#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Internal Voltage Regulator Not Trimmed */
-#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
-#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
-#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
-#define ANOMALY_05000432 (ANOMALY_BF526)
+#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
+#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
+#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* The WURESET Bit in the SYSCR Register is not Functional */
+#define ANOMALY_05000445 (1)
+/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
+#define ANOMALY_05000451 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
index 14427de7d77..4c572443147 100644
--- a/arch/blackfin/mach-bf533/Kconfig
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -59,6 +59,7 @@ config DMA7_UARTTX
 	default 10
 config TIMER0
 	int "TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config TIMER1
 	int "TIMER1"
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 0c66bf44cfa..38cf8ffd6d7 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.ctl_reg = 0x1000,
@@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 4,     /* actual baudrate is SCLK/(2xspeed_hz) */
@@ -266,6 +266,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 0765872a8ad..9ecdc361fa6 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -162,6 +162,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e8974878d8c..1443e92d8b6 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif
 
 /* SPI ADC chip */
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
 	.bits_per_word = 16,
@@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -160,6 +160,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08cd0969de4..89a5ec4ca04 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -196,6 +196,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index db96f33f72e..a68ade8a3ca 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -299,6 +299,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -448,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 1cf893e2e55..31145b509e2 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
@@ -34,12 +34,12 @@
 # define ANOMALY_BF533 0
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
 /* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
-#define ANOMALY_05000105 (1)
+#define ANOMALY_05000105 (__SILICON_REVISION__ > 2)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
@@ -48,7 +48,7 @@
 #define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
 /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
-/* Turning Serial Ports on with External Frame Syncs */
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
@@ -67,9 +67,9 @@
 /* Current DMA Address Shows Wrong Value During Carry Fix */
 #define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
 /* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
-#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000200 (__SILICON_REVISION__ == 3 || __SILICON_REVISION__ == 4)
 /* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
-#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000201 (__SILICON_REVISION__ == 3)
 /* Possible Infinite Stall with Specific Dual-DAG Situation */
 #define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
 /* Specific Sequence That Can Cause DMA Error or DMA Stopping */
@@ -104,7 +104,7 @@
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Data CPLBs Should Prevent Spurious Hardware Errors */
 #define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
@@ -137,7 +137,7 @@
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
 /* Spontaneous Reset of Internal Voltage Regulator */
-#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000271 (__SILICON_REVISION__ == 3)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
 /* Writes to Synchronous SDRAM Memory May Be Lost */
@@ -165,14 +165,14 @@
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
-#define ANOMALY_05000307 (1)
+#define ANOMALY_05000307 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
 #define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
@@ -200,17 +200,63 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
  */
 
+/* Internal voltage regulator can't be modified via register writes */
+#define ANOMALY_05000066 (__SILICON_REVISION__ < 2)
 /* Watchpoints (Hardware Breakpoints) are not supported */
 #define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* SDRAM PSSE bit cannot be set again after SDRAM Powerup */
+#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
+/* Writing FIO_DIR can corrupt a programmable flag's data */
+#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
+/* Timer Auto-Baud Mode requires the UART clock to be enabled */
+#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
+/* Internal Clocking Modes on SPORT0 not supported */
+#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
+/* Internal voltage regulator does not wake up from an RTC wakeup */
+#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
+/* The IFLUSH instruction must be preceded by a CSYNC instruction */
+#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
+/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */
+#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
+/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */
+#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
+/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
+#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
+/* 32-bit SPORT DMA will be word reversed */
+#define ANOMALY_05000098 (__SILICON_REVISION__ < 2)
+/* Incorrect status in the UART_IIR register */
+#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
+/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
+#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
+/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
+/* Incorrect value written to the cycle counters */
+#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
+/* Stores to L1 Data memory incorrect when a specific sequence is followed */
+#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
+/* Programmable Flag (PF3) functionality not supported in all PPI modes */
+#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
+/* Data store can be lost when targeting a cache line fill */
+#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
 /* Reserved bits in SYSCFG register not set at power on */
 #define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Infinite Core Stall */
+#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
+/* PPI_FSx may glitch when generated by the on chip Timers */
+#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
 /* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
+#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
+/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
+#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
 /* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
 #define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
@@ -222,7 +268,9 @@
 /* DMEM_CONTROL is not set on Reset */
 #define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
 /* SPI boot will not complete if there is a zero fill block in the loader file */
-#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
+/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */
+#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
 /* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
@@ -237,17 +285,17 @@
 #define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
 /* MDMA may lose the first few words of a descriptor chain */
 #define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
-/* The source MDMA descriptor may stop with a DMA Error */
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
 #define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
 /* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
 #define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
 /* Frame Delay in SPORT Multichannel Mode */
 #define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
-/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
 #define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
 /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
 #define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
-/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
 /* SPORT transmit data is not gated by external frame sync in certain conditions */
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
@@ -275,15 +323,27 @@
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index bbc08fd4f12..d81224f9d72 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -66,6 +66,7 @@ config IRQ_MAC_TX
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 41c75b9bfac..2a87d1cfcd0 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -182,8 +182,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 3c159819e55..399f81da7b9 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -184,6 +184,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e1de1e53f8..838240f151f 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -398,8 +398,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 0572926da23..ff7228caa7d 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -607,6 +607,43 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 	.enable_dma = 0,
@@ -695,8 +732,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -1280,7 +1317,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF5,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -1308,10 +1345,17 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 	{
 		I2C_BOARD_INFO("pmic-adp5520", 0x32),
-		.irq = IRQ_PF7,
+		.irq = IRQ_PG0,
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PG3,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1358,16 +1402,18 @@ static struct resource bfin_pata_resources[] = {
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 0,
 };
-
+/* CompactFlash Storage Card Memory Mapped Adressing
+ * /REG = A11 = 1
+ */
 static struct resource bfin_pata_resources[] = {
 	{
-		.start = 0x20211820,
-		.end = 0x2021183F,
+		.start = 0x20211800,
+		.end = 0x20211807,
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start = 0x2021181C,
-		.end = 0x2021181F,
+		.start = 0x2021180E,	/* Device Ctl */
+		.end = 0x2021180E,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -1527,7 +1573,8 @@ static int __init stamp_init(void)
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
+	 && defined(PATA_INT)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 53ad10f3cd7..e523e6e610d 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -182,6 +182,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 1bfd80c26c9..fc966342546 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
@@ -36,77 +36,75 @@
 
 /* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
-/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
-/* Rx.H cannot be used to access 16-bit System MMR registers */
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
-/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
-#define ANOMALY_05000167 (1)
-/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
 /* Instruction Cache Is Not Functional */
 #define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* CLKIN Buffer Output Enable Reset Behavior Is Changed */
 #define ANOMALY_05000247 (1)
-/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
 /* EMAC Tx DMA error after an early frame abort */
 #define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
-/* Maximum external clock speed for Timers */
+/* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
 #define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
-/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
 #define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
 /* EMAC MDIO input latched on wrong MDC edge */
 #define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
-/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
 #define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
-/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
 #define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
-/* ICPLB_STATUS MMR register may be corrupted */
+/* ICPLB_STATUS MMR Register May Be Corrupted */
 #define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
-/* Stores to data cache may be lost */
+/* Stores To Data Cache May Be Lost */
 #define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
-/* Hardware loop corrupted when taking an ICPLB exception */
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
 #define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
-/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
-/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
 #define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
-/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
-/* Certain data cache write through modes fail for VDDint <=0.9V */
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* Writes to Synchronous SDRAM memory may be lost */
+/* Writes to Synchronous SDRAM Memory May Be Lost */
 #define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
-/* Disabling Peripherals with DMA running may cause DMA system instability */
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
 /* SPI Master boot mode does not work well with Atmel Data flash devices */
 #define ANOMALY_05000280 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
-/* Memory DMA corruption with 32-bit data and traffic control */
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
 /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
 /* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
 #define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
-/* SPORTs may receive bad data if FIFOs fill up */
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
-/* Memory to memory DMA source/destination descriptors must be in same memory space */
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
@@ -116,11 +114,11 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
 /* Writing UART_THR while UART clock is disabled sends erroneous start bit */
 #define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
-/* False hardware errors caused by fetches at the boundary of reserved memory */
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI is level sensitive on first transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
@@ -156,24 +154,46 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/Kconfig b/arch/blackfin/mach-bf538/Kconfig
index f068c3523cd..2d280f504ab 100644
--- a/arch/blackfin/mach-bf538/Kconfig
+++ b/arch/blackfin/mach-bf538/Kconfig
@@ -57,6 +57,7 @@ config IRQ_UART0_TX
 	default 10
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index e37cb937888..57695b4c3c0 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -352,6 +352,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -366,6 +371,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 3a569982736..175ca9ef723 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List
  *  - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List
  */
@@ -14,17 +14,29 @@
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+/* We do not support old silicon - sorry */
 #if __SILICON_REVISION__ < 4
-# error will not work on BF538 silicon version 0.0, 0.1, 0.2, or 0.3
+# error will not work on BF538/BF539 silicon version 0.0, 0.1, 0.2, or 0.3
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#if defined(__ADSPBF538__)
+# define ANOMALY_BF538 1
+#else
+# define ANOMALY_BF538 0
+#endif
+#if defined(__ADSPBF539__)
+# define ANOMALY_BF539 1
+#else
+# define ANOMALY_BF539 0
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (1)
@@ -40,13 +52,13 @@
 #define ANOMALY_05000229 (1)
 /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
 #define ANOMALY_05000233 (1)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (1)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 4)
@@ -58,11 +70,11 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
-/* False Hardware Error Exception when ISR Context Is Not Restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
-/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
@@ -80,14 +92,14 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
-/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
 /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
-#define ANOMALY_05000318 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (__SILICON_REVISION__ < 5)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -114,23 +126,45 @@
 #define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index ea25371a922..6f628353dde 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -68,25 +68,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-
-#define bfin_write_MDMA_D0_IRQ_STATUS	bfin_write_MDMA0_D0_IRQ_STATUS
-#define bfin_write_MDMA_D0_START_ADDR   bfin_write_MDMA0_D0_START_ADDR
-#define bfin_write_MDMA_S0_START_ADDR   bfin_write_MDMA0_S0_START_ADDR
-#define bfin_write_MDMA_D0_X_COUNT      bfin_write_MDMA0_D0_X_COUNT
-#define bfin_write_MDMA_S0_X_COUNT      bfin_write_MDMA0_S0_X_COUNT
-#define bfin_write_MDMA_D0_Y_COUNT      bfin_write_MDMA0_D0_Y_COUNT
-#define bfin_write_MDMA_S0_Y_COUNT      bfin_write_MDMA0_S0_Y_COUNT
-#define bfin_write_MDMA_D0_X_MODIFY     bfin_write_MDMA0_D0_X_MODIFY
-#define bfin_write_MDMA_S0_X_MODIFY     bfin_write_MDMA0_S0_X_MODIFY
-#define bfin_write_MDMA_D0_Y_MODIFY     bfin_write_MDMA0_D0_Y_MODIFY
-#define bfin_write_MDMA_S0_Y_MODIFY     bfin_write_MDMA0_S0_Y_MODIFY
-#define bfin_write_MDMA_S0_CONFIG       bfin_write_MDMA0_S0_CONFIG
-#define bfin_write_MDMA_D0_CONFIG       bfin_write_MDMA0_D0_CONFIG
-#define bfin_read_MDMA_S0_CONFIG        bfin_read_MDMA0_S0_CONFIG
-#define bfin_read_MDMA_D0_IRQ_STATUS    bfin_read_MDMA0_D0_IRQ_STATUS
-#define bfin_write_MDMA_S0_IRQ_STATUS   bfin_write_MDMA0_S0_IRQ_STATUS
-
-
 /* DPMC*/
 #define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
 #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 241725bc698..99ca3f4305e 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -67,14 +67,14 @@
 #define bfin_write_SIC_ISR0(val)       bfin_write32(SIC_ISR0, val)
 #define bfin_read_SIC_ISR1()           bfin_read32(SIC_ISR1)
 #define bfin_write_SIC_ISR1(val)       bfin_write32(SIC_ISR1, val)
-#define bfin_read_SIC_ISR(x)	       bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
+#define bfin_read_SIC_ISR(x)           bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
 #define bfin_write_SIC_ISR(x, val)     bfin_write32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0), val)
 #define bfin_read_SIC_IWR0()           bfin_read32(SIC_IWR0)
 #define bfin_write_SIC_IWR0(val)       bfin_write32(SIC_IWR0, val)
 #define bfin_read_SIC_IWR1()           bfin_read32(SIC_IWR1)
 #define bfin_write_SIC_IWR1(val)       bfin_write32(SIC_IWR1, val)
-#define bfin_read_SIC_IWR(x)	       bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
-#define bfin_write_SIC_IWR(x, val)     bfin_write32((SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
+#define bfin_read_SIC_IWR(x)           bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
+#define bfin_write_SIC_IWR(x, val)     bfin_write32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
 #define bfin_read_SIC_IAR0()           bfin_read32(SIC_IAR0)
 #define bfin_write_SIC_IAR0(val)       bfin_write32(SIC_IAR0, val)
 #define bfin_read_SIC_IAR1()           bfin_read32(SIC_IAR1)
@@ -1247,6 +1247,65 @@
 #define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT, val)
 #define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT)
 #define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT, val)
+
+#define bfin_read_MDMA_S0_CONFIG()  bfin_read_MDMA0_S0_CONFIG()
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA0_S0_CONFIG(val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()  bfin_read_MDMA0_S0_IRQ_STATUS()
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA0_S0_IRQ_STATUS(val)
+#define bfin_read_MDMA_S0_X_MODIFY()  bfin_read_MDMA0_S0_X_MODIFY()
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA0_S0_X_MODIFY(val)
+#define bfin_read_MDMA_S0_Y_MODIFY()  bfin_read_MDMA0_S0_Y_MODIFY()
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA0_S0_Y_MODIFY(val)
+#define bfin_read_MDMA_S0_X_COUNT()  bfin_read_MDMA0_S0_X_COUNT()
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA0_S0_X_COUNT(val)
+#define bfin_read_MDMA_S0_Y_COUNT()  bfin_read_MDMA0_S0_Y_COUNT()
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA0_S0_Y_COUNT(val)
+#define bfin_read_MDMA_S0_START_ADDR()  bfin_read_MDMA0_S0_START_ADDR()
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA0_S0_START_ADDR(val)
+#define bfin_read_MDMA_D0_CONFIG()  bfin_read_MDMA0_D0_CONFIG()
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA0_D0_CONFIG(val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()  bfin_read_MDMA0_D0_IRQ_STATUS()
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA0_D0_IRQ_STATUS(val)
+#define bfin_read_MDMA_D0_X_MODIFY()  bfin_read_MDMA0_D0_X_MODIFY()
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA0_D0_X_MODIFY(val)
+#define bfin_read_MDMA_D0_Y_MODIFY()  bfin_read_MDMA0_D0_Y_MODIFY()
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA0_D0_Y_MODIFY(val)
+#define bfin_read_MDMA_D0_X_COUNT()  bfin_read_MDMA0_D0_X_COUNT()
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA0_D0_X_COUNT(val)
+#define bfin_read_MDMA_D0_Y_COUNT()  bfin_read_MDMA0_D0_Y_COUNT()
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA0_D0_Y_COUNT(val)
+#define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA0_D0_START_ADDR()
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA0_D0_START_ADDR(val)
+
+#define bfin_read_MDMA_S1_CONFIG()  bfin_read_MDMA0_S1_CONFIG()
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA0_S1_CONFIG(val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()  bfin_read_MDMA0_S1_IRQ_STATUS()
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA0_S1_IRQ_STATUS(val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read_MDMA0_S1_X_MODIFY()
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA0_S1_X_MODIFY(val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read_MDMA0_S1_Y_MODIFY()
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA0_S1_Y_MODIFY(val)
+#define bfin_read_MDMA_S1_X_COUNT()  bfin_read_MDMA0_S1_X_COUNT()
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA0_S1_X_COUNT(val)
+#define bfin_read_MDMA_S1_Y_COUNT()  bfin_read_MDMA0_S1_Y_COUNT()
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA0_S1_Y_COUNT(val)
+#define bfin_read_MDMA_S1_START_ADDR()  bfin_read_MDMA0_S1_START_ADDR()
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA0_S1_START_ADDR(val)
+#define bfin_read_MDMA_D1_CONFIG()  bfin_read_MDMA0_D1_CONFIG()
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA0_D1_CONFIG(val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()  bfin_read_MDMA0_D1_IRQ_STATUS()
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA0_D1_IRQ_STATUS(val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read_MDMA0_D1_X_MODIFY()
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA0_D1_X_MODIFY(val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read_MDMA0_D1_Y_MODIFY()
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA0_D1_Y_MODIFY(val)
+#define bfin_read_MDMA_D1_X_COUNT()  bfin_read_MDMA0_D1_X_COUNT()
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA0_D1_X_COUNT(val)
+#define bfin_read_MDMA_D1_Y_COUNT()  bfin_read_MDMA0_D1_Y_COUNT()
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA0_D1_Y_COUNT(val)
+#define bfin_read_MDMA_D1_START_ADDR()  bfin_read_MDMA0_D1_START_ADDR()
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA0_D1_START_ADDR(val)
+
 #define bfin_read_PPI_CONTROL()        bfin_read16(PPI_CONTROL)
 #define bfin_write_PPI_CONTROL(val)    bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()         bfin_read16(PPI_STATUS)
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 6adbfcc65a3..bdc330cd0e1 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -412,6 +412,62 @@
 #define	MDMA0_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA0 Stream 1 Source Current X Count Register */
 #define	MDMA0_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA0 Stream 1 Source Current Y Count Register */
 
+#define MDMA_D0_NEXT_DESC_PTR MDMA0_D0_NEXT_DESC_PTR
+#define MDMA_D0_START_ADDR MDMA0_D0_START_ADDR
+#define MDMA_D0_CONFIG MDMA0_D0_CONFIG
+#define MDMA_D0_X_COUNT MDMA0_D0_X_COUNT
+#define MDMA_D0_X_MODIFY MDMA0_D0_X_MODIFY
+#define MDMA_D0_Y_COUNT MDMA0_D0_Y_COUNT
+#define MDMA_D0_Y_MODIFY MDMA0_D0_Y_MODIFY
+#define MDMA_D0_CURR_DESC_PTR MDMA0_D0_CURR_DESC_PTR
+#define MDMA_D0_CURR_ADDR MDMA0_D0_CURR_ADDR
+#define MDMA_D0_IRQ_STATUS MDMA0_D0_IRQ_STATUS
+#define MDMA_D0_PERIPHERAL_MAP MDMA0_D0_PERIPHERAL_MAP
+#define MDMA_D0_CURR_X_COUNT MDMA0_D0_CURR_X_COUNT
+#define MDMA_D0_CURR_Y_COUNT MDMA0_D0_CURR_Y_COUNT
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA0_S0_NEXT_DESC_PTR
+#define MDMA_S0_START_ADDR MDMA0_S0_START_ADDR
+#define MDMA_S0_CONFIG MDMA0_S0_CONFIG
+#define MDMA_S0_X_COUNT MDMA0_S0_X_COUNT
+#define MDMA_S0_X_MODIFY MDMA0_S0_X_MODIFY
+#define MDMA_S0_Y_COUNT MDMA0_S0_Y_COUNT
+#define MDMA_S0_Y_MODIFY MDMA0_S0_Y_MODIFY
+#define MDMA_S0_CURR_DESC_PTR MDMA0_S0_CURR_DESC_PTR
+#define MDMA_S0_CURR_ADDR MDMA0_S0_CURR_ADDR
+#define MDMA_S0_IRQ_STATUS MDMA0_S0_IRQ_STATUS
+#define MDMA_S0_PERIPHERAL_MAP MDMA0_S0_PERIPHERAL_MAP
+#define MDMA_S0_CURR_X_COUNT MDMA0_S0_CURR_X_COUNT
+#define MDMA_S0_CURR_Y_COUNT MDMA0_S0_CURR_Y_COUNT
+
+#define MDMA_D1_NEXT_DESC_PTR MDMA0_D1_NEXT_DESC_PTR
+#define MDMA_D1_START_ADDR MDMA0_D1_START_ADDR
+#define MDMA_D1_CONFIG MDMA0_D1_CONFIG
+#define MDMA_D1_X_COUNT MDMA0_D1_X_COUNT
+#define MDMA_D1_X_MODIFY MDMA0_D1_X_MODIFY
+#define MDMA_D1_Y_COUNT MDMA0_D1_Y_COUNT
+#define MDMA_D1_Y_MODIFY MDMA0_D1_Y_MODIFY
+#define MDMA_D1_CURR_DESC_PTR MDMA0_D1_CURR_DESC_PTR
+#define MDMA_D1_CURR_ADDR MDMA0_D1_CURR_ADDR
+#define MDMA_D1_IRQ_STATUS MDMA0_D1_IRQ_STATUS
+#define MDMA_D1_PERIPHERAL_MAP MDMA0_D1_PERIPHERAL_MAP
+#define MDMA_D1_CURR_X_COUNT MDMA0_D1_CURR_X_COUNT
+#define MDMA_D1_CURR_Y_COUNT MDMA0_D1_CURR_Y_COUNT
+
+#define MDMA_S1_NEXT_DESC_PTR MDMA0_S1_NEXT_DESC_PTR
+#define MDMA_S1_START_ADDR MDMA0_S1_START_ADDR
+#define MDMA_S1_CONFIG MDMA0_S1_CONFIG
+#define MDMA_S1_X_COUNT MDMA0_S1_X_COUNT
+#define MDMA_S1_X_MODIFY MDMA0_S1_X_MODIFY
+#define MDMA_S1_Y_COUNT MDMA0_S1_Y_COUNT
+#define MDMA_S1_Y_MODIFY MDMA0_S1_Y_MODIFY
+#define MDMA_S1_CURR_DESC_PTR MDMA0_S1_CURR_DESC_PTR
+#define MDMA_S1_CURR_ADDR MDMA0_S1_CURR_ADDR
+#define MDMA_S1_IRQ_STATUS MDMA0_S1_IRQ_STATUS
+#define MDMA_S1_PERIPHERAL_MAP MDMA0_S1_PERIPHERAL_MAP
+#define MDMA_S1_CURR_X_COUNT MDMA0_S1_CURR_X_COUNT
+#define MDMA_S1_CURR_Y_COUNT MDMA0_S1_CURR_Y_COUNT
+
 
 /* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
 #define	PPI_CONTROL			0xFFC01000	/* PPI Control Register */
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index dcf65715905..a09623dfd55 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -11,6 +11,13 @@ config DEB_DMA_URGENT
 	help
 	  Treat any DEB1, DEB2 and DEB3 request as Urgent
 
+config BF548_ATAPI_ALTERNATIVE_PORT
+	bool "BF548 ATAPI alternative port via GPIO"
+	help
+	  BF548 ATAPI data and address PINs can be routed through
+	  async address or GPIO port F and G. Select y to route it
+	  to GPIO.
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
@@ -250,6 +257,7 @@ config IRQ_OTPSEC
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f53ad682530..f5a3c30a41b 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -612,6 +612,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -626,6 +631,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 096e661700a..805a57b5e65 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -208,6 +208,43 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
@@ -359,6 +396,8 @@ static struct platform_device bfin_sir3_device = {
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
 static struct resource smsc911x_resources[] = {
 	{
 		.name = "smsc911x-memory",
@@ -372,11 +411,22 @@ static struct resource smsc911x_resources[] = {
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
 static struct platform_device smsc911x_device = {
 	.name = "smsc911x",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smsc911x_resources),
 	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -628,6 +678,14 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+	.cs_change_per_word = 0,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -653,15 +711,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-{
-	.modalias		= "ad7877",
-	.platform_data		= &bfin_ad7877_ts_info,
-	.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
-	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
-	.bus_num		= 0,
-	.chip_select  		= 2,
-	.controller_data = &spi_ad7877_chip_info,
-},
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
+		.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 0,
+		.chip_select  		= 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
 #endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
@@ -672,8 +730,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+	{
+		.modalias		= "adxl34x",
+		.platform_data		= &adxl34x_info,
+		.irq			= IRQ_PC5,
+		.max_speed_hz		= 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 1,
+		.chip_select  		= 2,
+		.controller_data = &spi_adxl34x_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
 };
-
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
@@ -685,6 +754,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -699,6 +773,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -786,7 +865,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -797,6 +876,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 		.irq = 212,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PC5,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 882e40ccf0d..c510ae688e2 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -6,26 +6,31 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+/* We do not support 0.0 or 0.1 silicon - sorry */
+#if __SILICON_REVISION__ < 2
+# error will not work on BF548 silicon version 0.0, or 0.1
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
@@ -59,7 +64,7 @@
 #define ANOMALY_05000340 (__SILICON_REVISION__ < 1)
 /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
-/* USB Calibration Value Is Not Intialized */
+/* USB Calibration Value Is Not Initialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0x5411
@@ -147,11 +152,11 @@
 #define ANOMALY_05000416 (1)
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
 #define ANOMALY_05000425 (1)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
 #define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
-/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
@@ -170,26 +175,49 @@
 /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
 #define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
 /* USB DMA Mode 1 Short Packet Data Corruption */
-#define ANOMALY_05000450 (1
+#define ANOMALY_05000450 (1)
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index ffb1d0a44b4..ce372ba0f04 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -167,22 +167,42 @@
 #define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
 #define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
 #define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
-#define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
-#define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
-#define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
-#define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
-#define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
-#define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
-#define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
-#define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
-#define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
-#define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
-#define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
-#define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
-#define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
-#define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
-#define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
-#define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+# define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+# define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+# define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+# define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+# define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+# define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+# define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+# define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+# define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+# define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+# define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+# define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+# define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+# define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+# define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#else
+# define P_ATAPI_D0A	(P_DONTCARE)
+# define P_ATAPI_D1A	(P_DONTCARE)
+# define P_ATAPI_D2A	(P_DONTCARE)
+# define P_ATAPI_D3A	(P_DONTCARE)
+# define P_ATAPI_D4A	(P_DONTCARE)
+# define P_ATAPI_D5A	(P_DONTCARE)
+# define P_ATAPI_D6A	(P_DONTCARE)
+# define P_ATAPI_D7A	(P_DONTCARE)
+# define P_ATAPI_D8A	(P_DONTCARE)
+# define P_ATAPI_D9A	(P_DONTCARE)
+# define P_ATAPI_D10A	(P_DONTCARE)
+# define P_ATAPI_D11A	(P_DONTCARE)
+# define P_ATAPI_D12A	(P_DONTCARE)
+# define P_ATAPI_D13A	(P_DONTCARE)
+# define P_ATAPI_D14A	(P_DONTCARE)
+# define P_ATAPI_D15A	(P_DONTCARE)
+#endif
 
 #define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
@@ -200,9 +220,15 @@
 #define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
 #define P_CAN1_TX	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
 #define P_CAN1_RX	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
-#define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
-#define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
-#define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+# define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+# define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#else
+# define P_ATAPI_A0A	(P_DONTCARE)
+# define P_ATAPI_A1A	(P_DONTCARE)
+# define P_ATAPI_A2A	(P_DONTCARE)
+#endif
 #define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
 #define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
 #define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
index 638ec38ca47..cb974364151 100644
--- a/arch/blackfin/mach-bf561/Kconfig
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -9,22 +9,9 @@ if (!SMP)
 comment "Core B Support"
 
 config BF561_COREB
-	bool "Enable Core B support"
+	bool "Enable Core B loader"
 	default y
 
-config BF561_COREB_RESET
-	bool "Enable Core B reset support"
-	default n
-	help
-	  This requires code in the application that is loaded
-	  into Core B. In order to reset, the application needs
-	  to install an interrupt handler for Supplemental
-	  Interrupt 0, that sets RETI to 0xff600000 and writes
-	  bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
-	  This causes Core B to stall when Supplemental Interrupt
-	  0 is set, and will reset PC to 0xff600000 when
-	  COREB_SRAM_INIT is cleared.
-
 endif
 
 comment "Interrupt Priority Assignment"
@@ -138,6 +125,7 @@ config IRQ_DMA2_11
 	default 9
 config IRQ_TIMER0
 	int "TIMER 0  Interrupt"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "TIMER 1  Interrupt"
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index f623c6b0719..0c9d72c5f5b 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -177,8 +177,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 0e2178a1aec..b5ef7ff7b7b 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -304,6 +304,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 8598098c084..93635a766f9 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -1,406 +1,74 @@
-/*
- * File:         arch/blackfin/mach-bf561/coreb.c
- * Based on:
- * Author:
+/* Load firmware into Core B on a BF561
  *
- * Created:
- * Description:  Handle CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The Core B reset func requires code in the application that is loaded into
+ * Core B.  In order to reset, the application needs to install an interrupt
+ * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and
+ * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.  This causes Core
+ * B to stall when Supplemental Interrupt 0 is set, and will reset PC to
+ * 0xff600000 when COREB_SRAM_INIT is cleared.
  */
 
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
 #include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
 #include <linux/fs.h>
-#include <asm/dma.h>
-#include <asm/cacheflush.h>
-
-#define MODULE_VER		"v0.1"
-
-static spinlock_t coreb_lock;
-static wait_queue_head_t coreb_dma_wait;
-
-#define COREB_IS_OPEN		0x00000001
-#define COREB_IS_RUNNING	0x00000010
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
 
-#define CMD_COREB_INDEX		1
 #define CMD_COREB_START		2
 #define CMD_COREB_STOP		3
 #define CMD_COREB_RESET		4
 
-#define COREB_MINOR		229
-
-static unsigned long coreb_status = 0;
-static unsigned long coreb_base = 0xff600000;
-static unsigned long coreb_size = 0x4000;
-int coreb_dma_done;
-
-static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
-static ssize_t coreb_read(struct file *file, char *buf, size_t count,
-			  loff_t * ppos);
-static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
-			   loff_t * ppos);
-static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		       unsigned long arg);
-static int coreb_open(struct inode *inode, struct file *file);
-static int coreb_release(struct inode *inode, struct file *file);
-
-static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
-{
-	clear_dma_irqstat(CH_MEM_STREAM2_DEST);
-	coreb_dma_done = 1;
-	wake_up_interruptible(&coreb_dma_wait);
-	return IRQ_HANDLED;
-}
-
-static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
-			   loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	ssize_t wrote = 0;
-
-	if (p + count > coreb_size)
-		return -EFAULT;
-
-	while (count > 0) {
-		int len = count;
-
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-
-		coreb_dma_done = 0;
-
-		flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
-		/* Source Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
-		set_dma_x_count(CH_MEM_STREAM2_SRC, len);
-		set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_SRC, 0);
-		/* Destination Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
-		set_dma_x_count(CH_MEM_STREAM2_DEST, len);
-		set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
-
-		enable_dma(CH_MEM_STREAM2_SRC);
-		enable_dma(CH_MEM_STREAM2_DEST);
-
-		wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
-
-		disable_dma(CH_MEM_STREAM2_SRC);
-		disable_dma(CH_MEM_STREAM2_DEST);
-
-		count -= len;
-		wrote += len;
-		buf += len;
-		p += len;
-	}
-	*ppos = p;
-	return wrote;
-}
-
-static ssize_t coreb_read(struct file *file, char *buf, size_t count,
-			  loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	ssize_t read = 0;
-
-	if ((p + count) > coreb_size)
-		return -EFAULT;
-
-	while (count > 0) {
-		int len = count;
-
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-
-		coreb_dma_done = 0;
-
-		invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
-		/* Source Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
-		set_dma_x_count(CH_MEM_STREAM2_SRC, len);
-		set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_SRC, 0);
-		/* Destination Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
-		set_dma_x_count(CH_MEM_STREAM2_DEST, len);
-		set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
-
-		enable_dma(CH_MEM_STREAM2_SRC);
-		enable_dma(CH_MEM_STREAM2_DEST);
-
-		wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
-
-		disable_dma(CH_MEM_STREAM2_SRC);
-		disable_dma(CH_MEM_STREAM2_DEST);
-
-		count -= len;
-		read += len;
-		buf += len;
-		p += len;
-	}
-
-	return read;
-}
-
-static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
+static int
+coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	loff_t ret;
-
-	mutex_lock(&file->f_dentry->d_inode->i_mutex);
-
-	switch (origin) {
-	case 0 /* SEEK_SET */ :
-		if (offset < coreb_size) {
-			file->f_pos = offset;
-			ret = file->f_pos;
-		} else
-			ret = -EINVAL;
-		break;
-	case 1 /* SEEK_CUR */ :
-		if ((offset + file->f_pos) < coreb_size) {
-			file->f_pos += offset;
-			ret = file->f_pos;
-		} else
-			ret = -EINVAL;
-	default:
-		ret = -EINVAL;
-	}
-	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-	return ret;
-}
-
-/* No BKL needed here */
-static int coreb_open(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&coreb_lock);
-
-	if (coreb_status & COREB_IS_OPEN)
-		goto out_busy;
-
-	coreb_status |= COREB_IS_OPEN;
-
-	spin_unlock_irq(&coreb_lock);
-	return 0;
-
- out_busy:
-	spin_unlock_irq(&coreb_lock);
-	return -EBUSY;
-}
-
-static int coreb_release(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&coreb_lock);
-	coreb_status &= ~COREB_IS_OPEN;
-	spin_unlock_irq(&coreb_lock);
-	return 0;
-}
-
-static int coreb_ioctl(struct inode *inode, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	int retval = 0;
-	int coreb_index = 0;
+	int ret = 0;
 
 	switch (cmd) {
-	case CMD_COREB_INDEX:
-		if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
-			retval = -EFAULT;
-			break;
-		}
-
-		spin_lock_irq(&coreb_lock);
-		switch (coreb_index) {
-		case 0:
-			coreb_base = 0xff600000;
-			coreb_size = 0x4000;
-			break;
-		case 1:
-			coreb_base = 0xff610000;
-			coreb_size = 0x4000;
-			break;
-		case 2:
-			coreb_base = 0xff500000;
-			coreb_size = 0x8000;
-			break;
-		case 3:
-			coreb_base = 0xff400000;
-			coreb_size = 0x8000;
-			break;
-		default:
-			retval = -EINVAL;
-			break;
-		}
-		spin_unlock_irq(&coreb_lock);
-
-		mutex_lock(&file->f_dentry->d_inode->i_mutex);
-		file->f_pos = 0;
-		mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-		break;
 	case CMD_COREB_START:
-		spin_lock_irq(&coreb_lock);
-		if (coreb_status & COREB_IS_RUNNING) {
-			retval = -EBUSY;
-			break;
-		}
-		printk(KERN_INFO "Starting Core B\n");
-		coreb_status |= COREB_IS_RUNNING;
 		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
-		SSYNC();
-		spin_unlock_irq(&coreb_lock);
 		break;
-#if defined(CONFIG_BF561_COREB_RESET)
 	case CMD_COREB_STOP:
-		spin_lock_irq(&coreb_lock);
-		printk(KERN_INFO "Stopping Core B\n");
 		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
-		coreb_status &= ~COREB_IS_RUNNING;
-		spin_unlock_irq(&coreb_lock);
 		break;
 	case CMD_COREB_RESET:
-		printk(KERN_INFO "Resetting Core B\n");
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
 		break;
-#endif
+	default:
+		ret = -EINVAL;
+		break;
 	}
 
-	return retval;
+	CSYNC();
+
+	return ret;
 }
 
 static struct file_operations coreb_fops = {
-	.owner = THIS_MODULE,
-	.llseek = coreb_lseek,
-	.read = coreb_read,
-	.write = coreb_write,
-	.ioctl = coreb_ioctl,
-	.open = coreb_open,
-	.release = coreb_release
+	.owner   = THIS_MODULE,
+	.ioctl   = coreb_ioctl,
 };
 
 static struct miscdevice coreb_dev = {
-	COREB_MINOR,
-	"coreb",
-	&coreb_fops
+	.minor = MISC_DYNAMIC_MINOR,
+	.name  = "coreb",
+	.fops  = &coreb_fops,
 };
 
-static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
+static int __init bf561_coreb_init(void)
 {
-	return sprintf(buf,
-		       "Base Address:\t0x%08lx\n"
-		       "Core B is %s\n"
-		       "SICA_SYSCR:\t%04x\n"
-		       "SICB_SYSCR:\t%04x\n"
-		       "\n"
-		       "IRQ Status:\tCore A\t\tCore B\n"
-		       "ISR0:\t\t%08x\t\t%08x\n"
-		       "ISR1:\t\t%08x\t\t%08x\n"
-		       "IMASK0:\t\t%08x\t\t%08x\n"
-		       "IMASK1:\t\t%08x\t\t%08x\n",
-		       coreb_base,
-		       coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
-		       bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
-		       bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
-		       bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
-		       bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
-		       bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
-}
-
-static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
-
-int __init bf561_coreb_init(void)
-{
-	init_waitqueue_head(&coreb_dma_wait);
-
-	spin_lock_init(&coreb_lock);
-	/* Request the core memory regions for Core B */
-	if (request_mem_region(0xff600000, 0x4000,
-			       "Core B - Instruction SRAM") == NULL)
-		goto exit;
-
-	if (request_mem_region(0xFF610000, 0x4000,
-			       "Core B - Instruction SRAM") == NULL)
-		goto release_instruction_a_sram;
-
-	if (request_mem_region(0xFF500000, 0x8000,
-			       "Core B - Data Bank B SRAM") == NULL)
-		goto release_instruction_b_sram;
-
-	if (request_mem_region(0xff400000, 0x8000,
-			       "Core B - Data Bank A SRAM") == NULL)
-		goto release_data_b_sram;
-
-	if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
-		goto release_data_a_sram;
-
-	if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
-		goto release_dma_dest;
-
-	set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
-
-	misc_register(&coreb_dev);
-
-	if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
-		goto release_dma_src;
-
-	printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
-	return 0;
-
- release_dma_src:
-	free_dma(CH_MEM_STREAM2_SRC);
- release_dma_dest:
-	free_dma(CH_MEM_STREAM2_DEST);
- release_data_a_sram:
-	release_mem_region(0xff400000, 0x8000);
- release_data_b_sram:
-	release_mem_region(0xff500000, 0x8000);
- release_instruction_b_sram:
-	release_mem_region(0xff610000, 0x4000);
- release_instruction_a_sram:
-	release_mem_region(0xff600000, 0x4000);
- exit:
-	return -ENOMEM;
+	return misc_register(&coreb_dev);
 }
+module_init(bf561_coreb_init);
 
-void __exit bf561_coreb_exit(void)
+static void __exit bf561_coreb_exit(void)
 {
-	device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
 	misc_deregister(&coreb_dev);
-
-	release_mem_region(0xff610000, 0x4000);
-	release_mem_region(0xff600000, 0x4000);
-	release_mem_region(0xff500000, 0x8000);
-	release_mem_region(0xff400000, 0x8000);
-
-	free_dma(CH_MEM_STREAM2_DEST);
-	free_dma(CH_MEM_STREAM2_SRC);
 }
-
-module_init(bf561_coreb_init);
 module_exit(bf561_coreb_exit);
 
 MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index d0b0b350644..dccd396cd93 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List
  */
 
@@ -18,11 +18,11 @@
 # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
-/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
 /* Testset instructions restricted to 32-bit aligned memory locations */
 #define ANOMALY_05000120 (1)
@@ -40,7 +40,7 @@
 #define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
 #define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
 /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
 #define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -80,7 +80,7 @@
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
 /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
-/* Turning Serial Ports on with External Frame Syncs */
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
 /* SDRAM auto-refresh and subsequent Power Ups */
 #define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
@@ -164,7 +164,7 @@
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
 /* TESTSET operation forces stall on the other core */
 #define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
@@ -208,7 +208,7 @@
 #define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
 /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
 #define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
@@ -232,7 +232,7 @@
 #define ANOMALY_05000310 (1)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (1)
@@ -276,18 +276,27 @@
 #define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000119 (0)
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000233 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index 95d609f11c9..9d9858c2be6 100644
--- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -1526,6 +1526,35 @@
 #define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA1_D0_START_ADDR()
 #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val)
 
+#define bfin_read_MDMA_S1_CONFIG()  bfin_read_MDMA1_S1_CONFIG()
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA1_S1_CONFIG(val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()  bfin_read_MDMA1_S1_IRQ_STATUS()
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA1_S1_IRQ_STATUS(val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read_MDMA1_S1_X_MODIFY()
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA1_S1_X_MODIFY(val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read_MDMA1_S1_Y_MODIFY()
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA1_S1_Y_MODIFY(val)
+#define bfin_read_MDMA_S1_X_COUNT()  bfin_read_MDMA1_S1_X_COUNT()
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA1_S1_X_COUNT(val)
+#define bfin_read_MDMA_S1_Y_COUNT()  bfin_read_MDMA1_S1_Y_COUNT()
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA1_S1_Y_COUNT(val)
+#define bfin_read_MDMA_S1_START_ADDR()  bfin_read_MDMA1_S1_START_ADDR()
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA1_S1_START_ADDR(val)
+#define bfin_read_MDMA_D1_CONFIG()  bfin_read_MDMA1_D1_CONFIG()
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA1_D1_CONFIG(val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()  bfin_read_MDMA1_D1_IRQ_STATUS()
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA1_D1_IRQ_STATUS(val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read_MDMA1_D1_X_MODIFY()
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA1_D1_X_MODIFY(val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read_MDMA1_D1_Y_MODIFY()
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA1_D1_Y_MODIFY(val)
+#define bfin_read_MDMA_D1_X_COUNT()  bfin_read_MDMA1_D1_X_COUNT()
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA1_D1_X_COUNT(val)
+#define bfin_read_MDMA_D1_Y_COUNT()  bfin_read_MDMA1_D1_Y_COUNT()
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA1_D1_Y_COUNT(val)
+#define bfin_read_MDMA_D1_START_ADDR()  bfin_read_MDMA1_D1_START_ADDR()
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA1_D1_START_ADDR(val)
+
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index cf922295f4c..5fc0f05026e 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -796,6 +796,62 @@
 #define MDMA2_S1_IRQ_STATUS 0xFFC00FE8	/*MemDMA2 Stream 1 Source Interrupt/Status Register */
 #define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC	/*MemDMA2 Stream 1 Source Peripheral Map register */
 
+#define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR
+#define MDMA_D0_START_ADDR MDMA1_D0_START_ADDR
+#define MDMA_D0_CONFIG MDMA1_D0_CONFIG
+#define MDMA_D0_X_COUNT MDMA1_D0_X_COUNT
+#define MDMA_D0_X_MODIFY MDMA1_D0_X_MODIFY
+#define MDMA_D0_Y_COUNT MDMA1_D0_Y_COUNT
+#define MDMA_D0_Y_MODIFY MDMA1_D0_Y_MODIFY
+#define MDMA_D0_CURR_DESC_PTR MDMA1_D0_CURR_DESC_PTR
+#define MDMA_D0_CURR_ADDR MDMA1_D0_CURR_ADDR
+#define MDMA_D0_IRQ_STATUS MDMA1_D0_IRQ_STATUS
+#define MDMA_D0_PERIPHERAL_MAP MDMA1_D0_PERIPHERAL_MAP
+#define MDMA_D0_CURR_X_COUNT MDMA1_D0_CURR_X_COUNT
+#define MDMA_D0_CURR_Y_COUNT MDMA1_D0_CURR_Y_COUNT
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR
+#define MDMA_S0_START_ADDR MDMA1_S0_START_ADDR
+#define MDMA_S0_CONFIG MDMA1_S0_CONFIG
+#define MDMA_S0_X_COUNT MDMA1_S0_X_COUNT
+#define MDMA_S0_X_MODIFY MDMA1_S0_X_MODIFY
+#define MDMA_S0_Y_COUNT MDMA1_S0_Y_COUNT
+#define MDMA_S0_Y_MODIFY MDMA1_S0_Y_MODIFY
+#define MDMA_S0_CURR_DESC_PTR MDMA1_S0_CURR_DESC_PTR
+#define MDMA_S0_CURR_ADDR MDMA1_S0_CURR_ADDR
+#define MDMA_S0_IRQ_STATUS MDMA1_S0_IRQ_STATUS
+#define MDMA_S0_PERIPHERAL_MAP MDMA1_S0_PERIPHERAL_MAP
+#define MDMA_S0_CURR_X_COUNT MDMA1_S0_CURR_X_COUNT
+#define MDMA_S0_CURR_Y_COUNT MDMA1_S0_CURR_Y_COUNT
+
+#define MDMA_D1_NEXT_DESC_PTR MDMA1_D1_NEXT_DESC_PTR
+#define MDMA_D1_START_ADDR MDMA1_D1_START_ADDR
+#define MDMA_D1_CONFIG MDMA1_D1_CONFIG
+#define MDMA_D1_X_COUNT MDMA1_D1_X_COUNT
+#define MDMA_D1_X_MODIFY MDMA1_D1_X_MODIFY
+#define MDMA_D1_Y_COUNT MDMA1_D1_Y_COUNT
+#define MDMA_D1_Y_MODIFY MDMA1_D1_Y_MODIFY
+#define MDMA_D1_CURR_DESC_PTR MDMA1_D1_CURR_DESC_PTR
+#define MDMA_D1_CURR_ADDR MDMA1_D1_CURR_ADDR
+#define MDMA_D1_IRQ_STATUS MDMA1_D1_IRQ_STATUS
+#define MDMA_D1_PERIPHERAL_MAP MDMA1_D1_PERIPHERAL_MAP
+#define MDMA_D1_CURR_X_COUNT MDMA1_D1_CURR_X_COUNT
+#define MDMA_D1_CURR_Y_COUNT MDMA1_D1_CURR_Y_COUNT
+
+#define MDMA_S1_NEXT_DESC_PTR MDMA1_S1_NEXT_DESC_PTR
+#define MDMA_S1_START_ADDR MDMA1_S1_START_ADDR
+#define MDMA_S1_CONFIG MDMA1_S1_CONFIG
+#define MDMA_S1_X_COUNT MDMA1_S1_X_COUNT
+#define MDMA_S1_X_MODIFY MDMA1_S1_X_MODIFY
+#define MDMA_S1_Y_COUNT MDMA1_S1_Y_COUNT
+#define MDMA_S1_Y_MODIFY MDMA1_S1_Y_MODIFY
+#define MDMA_S1_CURR_DESC_PTR MDMA1_S1_CURR_DESC_PTR
+#define MDMA_S1_CURR_ADDR MDMA1_S1_CURR_ADDR
+#define MDMA_S1_IRQ_STATUS MDMA1_S1_IRQ_STATUS
+#define MDMA_S1_PERIPHERAL_MAP MDMA1_S1_PERIPHERAL_MAP
+#define MDMA_S1_CURR_X_COUNT MDMA1_S1_CURR_X_COUNT
+#define MDMA_S1_CURR_Y_COUNT MDMA1_S1_CURR_Y_COUNT
+
 /* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
 #define IMDMA_D0_CONFIG 0xFFC01808	/*IMDMA Stream 0 Destination Configuration */
 #define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800	/*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 9b27e698c0b..8c10701c251 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -133,9 +133,9 @@ void __init platform_request_ipi(irq_handler_t handler)
 	int ret;
 
 	ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED,
-			  "SMP interrupt", handler);
+			  "Supplemental Interrupt0", handler);
 	if (ret)
-		panic("Cannot request supplemental interrupt 0 for IPI service\n");
+		panic("Cannot request supplemental interrupt 0 for IPI service");
 }
 
 void platform_send_ipi(cpumask_t callmap)
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 80d39b2f9db..da93d920716 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -71,3 +71,10 @@
 #if ANOMALY_05000448
 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
 #endif
+
+/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
+#if ANOMALY_05000220 && \
+	((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
+	 (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
+# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
+#endif
diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c
index e6ab1f81512..b59ce3cb380 100644
--- a/arch/blackfin/mach-common/cache-c.c
+++ b/arch/blackfin/mach-common/cache-c.c
@@ -16,9 +16,21 @@
 void blackfin_invalidate_entire_dcache(void)
 {
 	u32 dmem = bfin_read_DMEM_CONTROL();
-	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem & ~0xc);
 	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem);
 	SSYNC();
 }
+
+/* Invalidate the Entire Instruction cache by
+ * clearing IMC bit
+ */
+void blackfin_invalidate_entire_icache(void)
+{
+	u32 imem = bfin_read_IMEM_CONTROL();
+	bfin_write_IMEM_CONTROL(imem & ~0x4);
+	SSYNC();
+	bfin_write_IMEM_CONTROL(imem);
+	SSYNC();
+}
+
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index aa0648c6a9f..d9666fe6c3d 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -15,6 +15,13 @@
 
 .text
 
+/* 05000443 - IFLUSH cannot be last instruction in hardware loop */
+#if ANOMALY_05000443
+# define BROK_FLUSH_INST "IFLUSH"
+#else
+# define BROK_FLUSH_INST "no anomaly! yeah!"
+#endif
+
 /* Since all L1 caches work the same way, we use the same method for flushing
  * them.  Only the actual flush instruction differs.  We write this in asm as
  * GCC can be hard to coax into writing nice hardware loops.
@@ -23,7 +30,7 @@
  * R0 = start address
  * R1 = end address
  */
-.macro do_flush flushins:req optflushins optnopins label
+.macro do_flush flushins:req label
 
 	R2 = -L1_CACHE_BYTES;
 
@@ -44,22 +51,15 @@
 \label :
 .endif
 	P0 = R0;
+
 	LSETUP (1f, 2f) LC1 = P1;
 1:
-.ifnb \optflushins
-	\optflushins [P0];
-.endif
-#if ANOMALY_05000443
-.ifb \optnopins
-2:
-.endif
+.ifeqs "\flushins", BROK_FLUSH_INST
 	\flushins [P0++];
-.ifnb \optnopins
-2:	\optnopins;
-.endif
-#else
+2:	nop;
+.else
 2:	\flushins [P0++];
-#endif
+.endif
 
 	RTS;
 .endm
@@ -77,25 +77,9 @@ ENTRY(_blackfin_icache_flush_range)
  */
 	P0 = R0;
 	IFLUSH[P0];
-	do_flush IFLUSH, , nop
+	do_flush IFLUSH
 ENDPROC(_blackfin_icache_flush_range)
 
-/* Flush all cache lines assocoiated with this area of memory. */
-ENTRY(_blackfin_icache_dcache_flush_range)
-/*
- * Walkaround to avoid loading wrong instruction after invalidating icache
- * and following sequence is met.
- *
- * 1) One instruction address is cached in the instruction cache.
- * 2) This instruction in SDRAM is changed.
- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
- * 4) This instruction is executed again, but the old one is loaded.
- */
-	P0 = R0;
-	IFLUSH[P0];
-	do_flush FLUSH, IFLUSH
-ENDPROC(_blackfin_icache_dcache_flush_range)
-
 /* Throw away all D-cached data in specified region without any obligation to
  * write them back.  Since the Blackfin ISA does not have an "invalidate"
  * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
@@ -107,7 +91,7 @@ ENDPROC(_blackfin_dcache_invalidate_range)
 
 /* Flush all data cache lines assocoiated with this memory area */
 ENTRY(_blackfin_dcache_flush_range)
-	do_flush FLUSH, , , .Ldfr
+	do_flush FLUSH, .Ldfr
 ENDPROC(_blackfin_dcache_flush_range)
 
 /* Our headers convert the page structure to an address, so just need to flush
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 35393651359..ef6870e9eea 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -72,6 +72,7 @@ void init_clocks(void)
 #endif
 	bfin_write_PLL_LOCKCNT(0x300);
 	do_sync();
+	/* We always write PLL_CTL thus avoiding Anomaly 05000242 */
 	bfin_write16(PLL_CTL, PLL_CTL_VAL);
 	__asm__ __volatile__("IDLE;");
 	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 72e16605ca0..70e3411f558 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -140,7 +140,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 	cclk = get_cclk() / 1000;
 	sclk = get_sclk() / 1000;
 
-#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
 	min_cclk = sclk * 2;
 #else
 	min_cclk = sclk;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index a063a434f7e..31fa313e81c 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -36,13 +36,13 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/unistd.h>
-#include <linux/threads.h>
 #include <asm/blackfin.h>
 #include <asm/errno.h>
 #include <asm/fixed_code.h>
 #include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
+#include <asm/traps.h>
 
 #include <asm/context.S>
 
@@ -85,13 +85,15 @@ ENTRY(_ex_workaround_261)
 	if !cc jump _bfin_return_from_exception;
 	/* fall through */
 	R7 = P4;
-	R6 = 0x26;	/* Data CPLB Miss */
+	R6 = VEC_CPLB_M;	/* Data CPLB Miss */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_miss (BP);
-	R6 = 0x23;	/* Data CPLB Miss */
+#ifdef CONFIG_MPU
+	R6 = VEC_CPLB_VL;	/* Data CPLB Violation */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_viol (BP);
-	/* Handle 0x23 Data CPLB Protection Violation
+#endif
+	/* Handle Data CPLB Protection Violation
 	 * and Data CPLB Multiple Hits - Linux Trap Zero
 	 */
 	jump _ex_trap_c;
@@ -201,7 +203,18 @@ ENTRY(_ex_single_step)
 	cc = r7 == 0;
 	if !cc jump 1f;
 #endif
-
+#ifdef CONFIG_EXACT_HWERR
+	/* Read the ILAT, and to check to see if the process we are
+	 * single stepping caused a previous hardware error
+	 * If so, do not single step, (which lowers to IRQ5, and makes
+	 * us miss the error).
+	 */
+	p5.l = lo(ILAT);
+	p5.h = hi(ILAT);
+	r7 = [p5];
+	cc = bittst(r7, EVT_IVHW_P);
+	if cc jump 1f;
+#endif
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
@@ -260,16 +273,7 @@ ENTRY(_bfin_return_from_exception)
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
 	r7 = r7 & r6;
-	r6 = 0x25;
-	CC = R7 == R6;
-	if CC JUMP _double_fault;
-
-	/* Did we cause a HW error? */
-	p5.l = lo(ILAT);
-	p5.h = hi(ILAT);
-	r6 = [p5];
-	r7 = 0x20;		/* Did I just cause anther HW error? */
-	r6 = r7 & r6;
+	r6 = VEC_UNCOV;
 	CC = R7 == R6;
 	if CC JUMP _double_fault;
 #endif
@@ -473,6 +477,16 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
 
+#ifdef CONFIG_EXACT_HWERR
+	/* Make sure all pending read/writes complete. This will ensure any
+	 * accesses which could cause hardware errors completes, and signal
+	 * the the hardware before we do something silly, like crash the
+	 * kernel. We don't need to work around anomaly 05000312, since
+	 * we are already atomic
+	 */
+	ssync;
+#endif
+
 #if ANOMALY_05000283 || ANOMALY_05000315
 	cc = r7 == r7;
 	p5.h = HI(CHIPID);
@@ -855,7 +869,7 @@ ENTRY(_ret_from_exception)
 	p1.h = _schedule_and_signal;
 	[p0] = p1;
 	csync;
-	raise 15;		/* raise evt14 to do signal or reschedule */
+	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
 	bitclr(r0, 0);
@@ -916,7 +930,7 @@ ENTRY(_return_from_int)
 	p1.h = _schedule_and_signal_from_int;
 	[p0] = p1;
 	csync;
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
 	r0.l = lo(SAFE_USER_INSTRUCTION);
 	r0.h = hi(SAFE_USER_INSTRUCTION);
 	reti = r0;
@@ -930,18 +944,27 @@ ENTRY(_return_from_int)
 ENDPROC(_return_from_int)
 
 ENTRY(_lower_to_irq14)
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
 	r0.l = lo(SAFE_USER_INSTRUCTION);
 	r0.h = hi(SAFE_USER_INSTRUCTION);
 	reti = r0;
 #endif
-	r0 = 0x401f;
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */
+	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt14_softirq */
+	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
 	sti r0;
 	raise 14;
 	rti;
+ENDPROC(_lower_to_irq14)
+
 ENTRY(_evt14_softirq)
 #ifdef CONFIG_DEBUG_HWERR
-	r0 = 0x3f;
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 	sti r0;
 #else
 	cli r0;
@@ -949,8 +972,9 @@ ENTRY(_evt14_softirq)
 	[--sp] = RETI;
 	SP += 4;
 	rts;
+ENDPROC(_evt14_softirq)
 
-_schedule_and_signal_from_int:
+ENTRY(_schedule_and_signal_from_int)
 	/* To end up here, vector 15 was changed - so we have to change it
 	 * back.
 	 */
@@ -983,8 +1007,9 @@ _schedule_and_signal_from_int:
 	call _finish_atomic_sections;
 	sp += 12;
 	jump.s .Lresume_userspace;
+ENDPROC(_schedule_and_signal_from_int)
 
-_schedule_and_signal:
+ENTRY(_schedule_and_signal)
 	SAVE_CONTEXT_SYSCALL
 	/* To end up here, vector 15 was changed - so we have to change it
 	 * back.
@@ -1002,7 +1027,7 @@ _schedule_and_signal:
 1:
 	RESTORE_CONTEXT
 	rti;
-ENDPROC(_lower_to_irq14)
+ENDPROC(_schedule_and_signal)
 
 /* We handle this 100% in exception space - to reduce overhead
  * Only potiential problem is if the software buffer gets swapped out of the
@@ -1583,24 +1608,9 @@ ENTRY(_sys_call_table)
 	.long _sys_inotify_init1	/* 365 */
 	.long _sys_preadv
 	.long _sys_pwritev
+	.long _sys_rt_tgsigqueueinfo
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
 	.endr
 END(_sys_call_table)
-
-#ifdef CONFIG_EXCEPTION_L1_SCRATCH
-/* .section .l1.bss.scratch */
-.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH
-#else
-#ifdef CONFIG_SYSCALL_TAB_L1
-.section .l1.bss
-#else
-.bss
-#endif
-ENTRY(_exception_stack)
-	.rept 1024 * NR_CPUS
-	.long 0
-	.endr
-_exception_stack_top:
-#endif
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 698d4c05947..f826f6b9f91 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -30,8 +30,6 @@ ENTRY(__init_clear_bss)
 	rts;
 ENDPROC(__init_clear_bss)
 
-#define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
-
 ENTRY(__start)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
@@ -126,30 +124,30 @@ ENTRY(__start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r7 = [p0 + PDA_RETX];
+	r6 = [p0 + PDA_RETX];
 	p1.l = _init_saved_retx;
 	p1.h = _init_saved_retx;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_DCPLB];
+	r6 = [p0 + PDA_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr;
 	p1.h = _init_saved_dcplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_ICPLB];
+	r6 = [p0 + PDA_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr;
 	p1.h = _init_saved_icplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_SEQSTAT];
+	r6 = [p0 + PDA_SEQSTAT];
 	p1.l = _init_saved_seqstat;
 	p1.h = _init_saved_seqstat;
-	[p1] = r7;
+	[p1] = r6;
 #endif
 
 	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
+	sp.l = _init_thread_union;
+	sp.h = _init_thread_union;
 	fp = sp;
 	usp = sp;
 
@@ -189,7 +187,15 @@ ENTRY(__start)
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
+	/* Only use on-chip scratch space for stack when absolutely required
+	 * to avoid Anomaly 05000227 ... we know the init_clocks() func only
+	 * uses L1 text and stack space and no other memory region.
+	 */
+# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+	sp.l = lo(KERNEL_CLOCK_STACK);
+	sp.h = hi(KERNEL_CLOCK_STACK);
 	call _init_clocks;
+	sp = usp;	/* usp hasnt been touched, so restore from there */
 #endif
 
 	/* This section keeps the processor in supervisor mode
@@ -243,9 +249,7 @@ ENTRY(_real_start)
 	call _cmdline_init;
 
 	/* Load the current thread pointer and stack */
-	sp.l = _init_thread_union;
-	sp.h = _init_thread_union;
-	p1 = THREAD_SIZE (z);
+	p1 = THREAD_SIZE + 4 (z);	/* +4 is for reti loading */
 	sp = sp + p1;
 	usp = sp;
 	fp = sp;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 0069c2dd462..9c46680186e 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -145,6 +145,14 @@ __common_int_entry:
 
 /* interrupt routine for ivhw - 5 */
 ENTRY(_evt_ivhw)
+	/* In case a single action kicks off multiple memory transactions, (like
+	 * a cache line fetch, - this can cause multiple hardware errors, let's
+	 * catch them all. First - make sure all the actions are complete, and
+	 * the core sees the hardware errors.
+	 */
+	SSYNC;
+	SSYNC;
+
 	SAVE_ALL_SYS
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
@@ -159,6 +167,25 @@ ENTRY(_evt_ivhw)
 1:
 #endif
 
+	/* Handle all stacked hardware errors
+	 * To make sure we don't hang forever, only do it 10 times
+	 */
+	R0 = 0;
+	R2 = 10;
+1:
+	P0.L = LO(ILAT);
+	P0.H = HI(ILAT);
+	R1 = [P0];
+	CC = BITTST(R1, EVT_IVHW_P);
+	IF ! CC JUMP 2f;
+	/* OK a hardware error is pending - clear it */
+	R1 = EVT_IVHW_P;
+	[P0] = R1;
+	R0 += 1;
+	CC = R1 == R2;
+	if CC JUMP 2f;
+	JUMP 1b;
+2:
 	# We are going to dump something out, so make sure we print IPEND properly
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index a7d7b2dd405..351afd0e36d 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1052,7 +1052,7 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
@@ -1116,6 +1116,9 @@ int __init init_arch_irq(void)
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
+	/* This implicitly covers ANOMALY_05000171
+	 * Boot-ROM code modifies SICA_IWRx wakeup registers
+	 */
 #ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
 # ifdef SIC_IWR1
@@ -1136,13 +1139,6 @@ int __init init_arch_irq(void)
 	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
-#ifdef CONFIG_IPIPE
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct irq_desc *desc = irq_to_desc(irq);
-		desc->ic_prio = __ipipe_get_irq_priority(irq);
-	}
-#endif /* CONFIG_IPIPE */
-
 	return 0;
 }
 
@@ -1156,23 +1152,22 @@ void do_irq(int vec, struct pt_regs *fp)
 	} else {
 		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
 		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
-	|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+#if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
 		if (smp_processor_id()) {
-#ifdef CONFIG_SMP
+# ifdef SICB_ISR0
 			/* This will be optimized out in UP mode. */
 			sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0();
 			sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1();
-#endif
+# endif
 		} else {
 			sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 			sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
 		}
-#ifdef CONFIG_BF54x
+# ifdef SIC_ISR2
 		sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
+# endif
 		for (;; ivg++) {
 			if (ivg >= ivg_stop) {
 				atomic_inc(&num_spurious);
@@ -1236,20 +1231,16 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 
 	if (likely(vec == EVT_IVTMR_P)) {
 		irq = IRQ_CORETMR;
-		goto core_tick;
-	}
 
-	SSYNC();
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
-	{
+	} else {
+#if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
 		sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 		sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
-#ifdef CONFIG_BF54x
+# ifdef SIC_ISR2
 		sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
+# endif
 		for (;; ivg++) {
 			if (ivg >= ivg_stop) {
 				atomic_inc(&num_spurious);
@@ -1258,9 +1249,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 			if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
 				break;
 		}
-	}
 #else
-	{
 		unsigned long sic_status;
 
 		sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
@@ -1272,15 +1261,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 			} else if (sic_status & ivg->isrflag)
 				break;
 		}
-	}
 #endif
 
-	irq = ivg->irqno;
+		irq = ivg->irqno;
+	}
 
 	if (irq == IRQ_SYSTMR) {
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#else
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
 #endif
 		/* This is basically what we need from the register frame. */
@@ -1292,9 +1279,6 @@ core_tick:
 			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
 	}
 
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#endif
 	if (this_domain == ipipe_root_domain) {
 		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
 		barrier();
@@ -1312,7 +1296,7 @@ core_tick:
 		}
 	}
 
-       return 0;
+	return 0;
 }
 
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 93eab614607..61840059dfa 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -43,8 +43,13 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/cpu.h>
+#include <asm/time.h>
 #include <linux/err.h>
 
+/*
+ * Anomaly notes:
+ * 05000120 - we always define corelock as 32-bit integer in L2
+ */
 struct corelock_slot corelock __attribute__ ((__section__(".l2.bss")));
 
 void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb,
@@ -139,7 +144,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 
 static irqreturn_t ipi_handler(int irq, void *dev_instance)
 {
-	struct ipi_message *msg, *mg;
+	struct ipi_message *msg;
 	struct ipi_message_queue *msg_queue;
 	unsigned int cpu = smp_processor_id();
 
@@ -149,7 +154,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 	msg_queue->count++;
 
 	spin_lock(&msg_queue->lock);
-	list_for_each_entry_safe(msg, mg, &msg_queue->head, list) {
+	while (!list_empty(&msg_queue->head)) {
+		msg = list_entry(msg_queue->head.next, typeof(*msg), list);
 		list_del(&msg->list);
 		switch (msg->type) {
 		case BFIN_IPI_RESCHEDULE:
@@ -216,7 +222,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -256,7 +262,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -287,7 +293,7 @@ void smp_send_reschedule(int cpu)
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -315,7 +321,7 @@ void smp_send_stop(void)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -352,7 +358,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 static void __cpuinit setup_secondary(unsigned int cpu)
 {
-#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE))
+#if !defined(CONFIG_TICKSOURCE_GPTMR0)
 	struct irq_desc *timer_desc;
 #endif
 	unsigned long ilat;
@@ -364,16 +370,13 @@ static void __cpuinit setup_secondary(unsigned int cpu)
 	bfin_write_ILAT(ilat);
 	CSYNC();
 
-	/* Reserve the PDA space for the secondary CPU. */
-	reserve_pda();
-
 	/* Enable interrupt levels IVG7-15. IARs have been already
 	 * programmed by the boot CPU.  */
 	bfin_irq_flags |= IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 	/* Power down the core timer, just to play safe. */
 	bfin_write_TCNTL(0);
 
@@ -466,6 +469,17 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
+#ifdef __ARCH_SYNC_CORE_ICACHE
+void resync_core_icache(void)
+{
+	unsigned int cpu = get_cpu();
+	blackfin_invalidate_entire_icache();
+	++per_cpu(cpu_data, cpu).icache_invld_count;
+	put_cpu();
+}
+EXPORT_SYMBOL(resync_core_icache);
+#endif
+
 #ifdef __ARCH_SYNC_CORE_DCACHE
 unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
 
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 8cb0945563f..bc0062884fd 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,7 +30,6 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 9c3629b9a68..014a55abd09 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -52,9 +52,14 @@ static unsigned long empty_bad_page_table;
 
 static unsigned long empty_bad_page;
 
-unsigned long empty_zero_page;
+static unsigned long empty_zero_page;
 
-extern unsigned long exception_stack[NR_CPUS][1024];
+#ifndef CONFIG_EXCEPTION_L1_SCRATCH
+#if defined CONFIG_SYSCALL_TAB_L1
+__attribute__((l1_data))
+#endif
+static unsigned long exception_stack[NR_CPUS][1024];
+#endif
 
 struct blackfin_pda cpu_pda[NR_CPUS];
 EXPORT_SYMBOL(cpu_pda);
@@ -117,19 +122,18 @@ asmlinkage void __init init_pda(void)
 	cpu_pda[0].next = &cpu_pda[1];
 	cpu_pda[1].next = &cpu_pda[0];
 
+#ifdef CONFIG_EXCEPTION_L1_SCRATCH
+	cpu_pda[cpu].ex_stack = (unsigned long *)(L1_SCRATCH_START + \
+					L1_SCRATCH_LENGTH);
+#else
 	cpu_pda[cpu].ex_stack = exception_stack[cpu + 1];
+#endif
 
 #ifdef CONFIG_SMP
 	cpu_pda[cpu].imask = 0x1f;
 #endif
 }
 
-void __cpuinit reserve_pda(void)
-{
-	printk(KERN_INFO "PDA for CPU%u reserved at %p\n", smp_processor_id(),
-					&cpu_pda[smp_processor_id()]);
-}
-
 void __init mem_init(void)
 {
 	unsigned int codek = 0, datak = 0, initk = 0;
@@ -171,19 +175,6 @@ void __init mem_init(void)
 		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
 }
 
-static int __init sram_init(void)
-{
-	/* Initialize the blackfin L1 Memory. */
-	bfin_sram_init();
-
-	/* Reserve the PDA space for the boot CPU right after we
-	 * initialized the scratch memory allocator.
-	 */
-	reserve_pda();
-	return 0;
-}
-pure_initcall(sram_init);
-
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
 	unsigned long addr;
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index 22913e7a181..c080e70f98b 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -125,7 +125,7 @@ static bool isram_check_addr(const void *addr, size_t n)
 {
 	if ((addr >= (void *)L1_CODE_START) &&
 	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
-		if ((addr + n) >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+		if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
 			show_stack(NULL, NULL);
 			printk(KERN_ERR "isram_memcpy: copy involving %p length "
 					"(%zu) too long\n", addr, n);
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 530d1393a23..0bc3c4ef0aa 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -83,6 +83,14 @@ static struct kmem_cache *sram_piece_cache;
 static void __init l1sram_init(void)
 {
 	unsigned int cpu;
+	unsigned long reserve;
+
+#ifdef CONFIG_SMP
+	reserve = 0;
+#else
+	reserve = sizeof(struct l1_scratch_task_info);
+#endif
+
 	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
 		per_cpu(free_l1_ssram_head, cpu).next =
 			kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
@@ -91,8 +99,8 @@ static void __init l1sram_init(void)
 			return;
 		}
 
-		per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu);
-		per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH;
+		per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu) + reserve;
+		per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH - reserve;
 		per_cpu(free_l1_ssram_head, cpu).next->pid = 0;
 		per_cpu(free_l1_ssram_head, cpu).next->next = NULL;
 
@@ -223,7 +231,7 @@ static void __init l2_sram_init(void)
 	spin_lock_init(&l2_sram_lock);
 }
 
-void __init bfin_sram_init(void)
+static int __init bfin_sram_init(void)
 {
 	sram_piece_cache = kmem_cache_create("sram_piece_cache",
 				sizeof(struct sram_piece),
@@ -233,7 +241,10 @@ void __init bfin_sram_init(void)
 	l1_data_sram_init();
 	l1_inst_sram_init();
 	l2_sram_init();
+
+	return 0;
 }
+pure_initcall(bfin_sram_init);
 
 /* SRAM allocate function */
 static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
@@ -732,6 +743,10 @@ found:
 }
 EXPORT_SYMBOL(sram_free_with_lsl);
 
+/* Allocate memory and keep in L1 SRAM List (lsl) so that the resources are
+ * tracked.  These are designed for userspace so that when a process exits,
+ * we can safely reap their resources.
+ */
 void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 {
 	void *addr = NULL;
diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h
index 5718dd8902a..a6aca819e9f 100644
--- a/arch/cris/include/asm/atomic.h
+++ b/arch/cris/include/asm/atomic.h
@@ -158,5 +158,5 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()    barrier()
 #define smp_mb__after_atomic_inc()     barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif
diff --git a/arch/cris/include/asm/bitsperlong.h b/arch/cris/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/cris/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/cris/include/asm/mman.h b/arch/cris/include/asm/mman.h
index 1c35e1b66b4..b7f0afba3ce 100644
--- a/arch/cris/include/asm/mman.h
+++ b/arch/cris/include/asm/mman.h
@@ -3,7 +3,7 @@
 
 /* verbatim copy of asm-i386/ version */
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/cris/include/asm/page.h b/arch/cris/include/asm/page.h
index f3fdbd09c34..be45ee366be 100644
--- a/arch/cris/include/asm/page.h
+++ b/arch/cris/include/asm/page.h
@@ -68,7 +68,7 @@ typedef struct page *pgtable_t;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _CRIS_PAGE_H */
 
diff --git a/arch/cris/include/asm/signal.h b/arch/cris/include/asm/signal.h
index 349ae682b56..ea6af9aad76 100644
--- a/arch/cris/include/asm/signal.h
+++ b/arch/cris/include/asm/signal.h
@@ -106,7 +106,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c
index a187833febc..abc13e368b9 100644
--- a/arch/cris/kernel/module.c
+++ b/arch/cris/kernel/module.c
@@ -48,8 +48,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	FREE_MODULE(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 296c35cfb20..0409d981fd3 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -194,5 +194,5 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_ATOMIC_H */
diff --git a/arch/frv/include/asm/bitsperlong.h b/arch/frv/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/frv/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h
index b4371e92868..58c1d11e2ac 100644
--- a/arch/frv/include/asm/mman.h
+++ b/arch/frv/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MMAN_H__
 #define __ASM_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h
index bd9c220094c..25c6a500235 100644
--- a/arch/frv/include/asm/page.h
+++ b/arch/frv/include/asm/page.h
@@ -73,6 +73,6 @@ extern unsigned long max_pfn;
 #endif /* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_PAGE_H */
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index cc685e60b0f..492b5c4dfed 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -10,8 +10,8 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifndef ASM_PCI_H
-#define	ASM_PCI_H
+#ifndef _ASM_FRV_PCI_H
+#define _ASM_FRV_PCI_H
 
 #include <linux/mm.h>
 #include <asm/scatterlist.h>
@@ -43,12 +43,6 @@ extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_controller_num(PDEV)	(0)
 
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
 /* pci_unmap_{page,single} is a nop so... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
 #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
@@ -111,5 +105,4 @@ static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
 				    sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
 }
 
-
-#endif
+#endif /* _ASM_FRV_PCI_H */
diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h
index 2079197d483..f071e813dcb 100644
--- a/arch/frv/include/asm/signal.h
+++ b/arch/frv/include/asm/signal.h
@@ -3,107 +3,15 @@
 
 #include <linux/types.h>
 
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
+#ifndef __KERNEL__
 /* Here we must cater to libcs that poke about in kernel headers.  */
 
 #define NSIG		32
 typedef unsigned long sigset_t;
 
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	(_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
+#endif /* !__KERNEL__ */
 
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
+#define SA_RESTORER	0x04000000 /* to get struct sigaction correct */
 
 #include <asm-generic/signal.h>
 
@@ -115,16 +23,6 @@ struct old_sigaction {
 	__sigrestore_t sa_restorer;
 };
 
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
 #else
 /* Here we must cater to libcs that poke about in kernel headers.  */
 
@@ -143,19 +41,4 @@ struct sigaction {
 
 #endif /* __KERNEL__ */
 
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_SIGNAL_H */
diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h
index a62fb587237..b4868aafe79 100644
--- a/arch/frv/include/asm/termios.h
+++ b/arch/frv/include/asm/termios.h
@@ -52,7 +52,7 @@ struct termio {
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 
 #ifdef __KERNEL__
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 #endif
 
 #endif /* _ASM_TERMIOS_H */
diff --git a/arch/frv/kernel/module.c b/arch/frv/kernel/module.c
index 850d168f69f..711763c8a6f 100644
--- a/arch/frv/kernel/module.c
+++ b/arch/frv/kernel/module.c
@@ -35,8 +35,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
index 833186c8dc3..33c8c0fa958 100644
--- a/arch/h8300/include/asm/atomic.h
+++ b/arch/h8300/include/asm/atomic.h
@@ -141,5 +141,5 @@ static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
 #define smp_mb__before_atomic_inc()    barrier()
 #define smp_mb__after_atomic_inc() barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/h8300/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/h8300/include/asm/mman.h b/arch/h8300/include/asm/mman.h
index b9f104f22a3..cf35f0a6f12 100644
--- a/arch/h8300/include/asm/mman.h
+++ b/arch/h8300/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __H8300_MMAN_H__
 #define __H8300_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
index 0b6acf0b03a..837381a2df4 100644
--- a/arch/h8300/include/asm/page.h
+++ b/arch/h8300/include/asm/page.h
@@ -73,6 +73,6 @@ extern unsigned long memory_end;
 #endif /* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _H8300_PAGE_H */
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
index 7bc15048a64..fd8b66e40dc 100644
--- a/arch/h8300/include/asm/signal.h
+++ b/arch/h8300/include/asm/signal.h
@@ -105,7 +105,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
index cfc9127d2ce..0865e291c20 100644
--- a/arch/h8300/kernel/module.c
+++ b/arch/h8300/kernel/module.c
@@ -23,8 +23,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
index d37292bd987..88405cb0832 100644
--- a/arch/ia64/include/asm/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
@@ -216,5 +216,5 @@ atomic64_add_negative (__s64 i, atomic64_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_IA64_ATOMIC_H */
diff --git a/arch/ia64/include/asm/bitsperlong.h b/arch/ia64/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..ec4db3c970b
--- /dev/null
+++ b/arch/ia64/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_IA64_BITSPERLONG_H
+#define __ASM_IA64_BITSPERLONG_H
+
+#define __BITS_PER_LONG 64
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_IA64_BITSPERLONG_H */
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
index c73b87832a1..48cf8b98a0b 100644
--- a/arch/ia64/include/asm/mman.h
+++ b/arch/ia64/include/asm/mman.h
@@ -8,7 +8,7 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x00100		/* stack-like segment */
 #define MAP_GROWSUP	0x00200		/* register stack-like segment */
diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h
index 4f5ca5643cb..b166248d49a 100644
--- a/arch/ia64/include/asm/signal.h
+++ b/arch/ia64/include/asm/signal.h
@@ -114,7 +114,7 @@
 
 #endif /* __KERNEL__ */
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 # ifndef __ASSEMBLY__
 
diff --git a/arch/ia64/include/asm/suspend.h b/arch/ia64/include/asm/suspend.h
deleted file mode 100644
index b05bbb6074e..00000000000
--- a/arch/ia64/include/asm/suspend.h
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index e36b3716e71..fbf1ed3b44c 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -19,10 +19,6 @@
 # define __IA64_UL(x)		(x)
 # define __IA64_UL_CONST(x)	x
 
-# ifdef __KERNEL__
-#  define BITS_PER_LONG 64
-# endif
-
 #else
 # define __IA64_UL(x)		((unsigned long)(x))
 # define __IA64_UL_CONST(x)	x##UL
@@ -34,10 +30,7 @@ typedef unsigned int umode_t;
  */
 # ifdef __KERNEL__
 
-#define BITS_PER_LONG 64
-
 /* DMA addresses are 64-bits wide, in general.  */
-
 typedef u64 dma_addr_t;
 
 # endif /* __KERNEL__ */
diff --git a/arch/ia64/mm/extable.c b/arch/ia64/mm/extable.c
index 71c50dd8f87..c99a41e29fe 100644
--- a/arch/ia64/mm/extable.c
+++ b/arch/ia64/mm/extable.c
@@ -8,7 +8,7 @@
 #include <linux/sort.h>
 
 #include <asm/uaccess.h>
-#include <asm/module.h>
+#include <linux/module.h>
 
 static int cmp_ex(const void *a, const void *b)
 {
@@ -53,6 +53,32 @@ void sort_extable (struct exception_table_entry *start,
 	     cmp_ex, swap_ex);
 }
 
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->addr + x->addr;
+}
+
+#ifdef CONFIG_MODULES
+/*
+ * Any entry referring to the module init will be at the beginning or
+ * the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
+				  m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+
 const struct exception_table_entry *
 search_extable (const struct exception_table_entry *first,
 		const struct exception_table_entry *last,
diff --git a/arch/m32r/include/asm/atomic.h b/arch/m32r/include/asm/atomic.h
index 2eed30f8408..63f0cf0f50d 100644
--- a/arch/m32r/include/asm/atomic.h
+++ b/arch/m32r/include/asm/atomic.h
@@ -314,5 +314,5 @@ static __inline__ void atomic_set_mask(unsigned long  mask, atomic_t *addr)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif	/* _ASM_M32R_ATOMIC_H */
diff --git a/arch/m32r/include/asm/bitsperlong.h b/arch/m32r/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/m32r/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/m32r/include/asm/mman.h b/arch/m32r/include/asm/mman.h
index 516a8973b13..04a5f40aa40 100644
--- a/arch/m32r/include/asm/mman.h
+++ b/arch/m32r/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __M32R_MMAN_H__
 #define __M32R_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h
index c9333089fe1..11777f7a562 100644
--- a/arch/m32r/include/asm/page.h
+++ b/arch/m32r/include/asm/page.h
@@ -82,6 +82,6 @@ typedef struct page *pgtable_t;
 #define devmem_is_allowed(x) 1
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_M32R_PAGE_H */
diff --git a/arch/m32r/include/asm/pci.h b/arch/m32r/include/asm/pci.h
index fe785d167db..07d3834c6de 100644
--- a/arch/m32r/include/asm/pci.h
+++ b/arch/m32r/include/asm/pci.h
@@ -3,6 +3,4 @@
 
 #include <asm-generic/pci.h>
 
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
 #endif /* _ASM_M32R_PCI_H */
diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h
index 1a607066bc6..9c1acb2b1a9 100644
--- a/arch/m32r/include/asm/signal.h
+++ b/arch/m32r/include/asm/signal.h
@@ -107,7 +107,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/m32r/kernel/module.c b/arch/m32r/kernel/module.c
index 8d420579438..cb5f37d78d4 100644
--- a/arch/m32r/kernel/module.c
+++ b/arch/m32r/kernel/module.c
@@ -44,8 +44,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h
index eb0ab9d4ee7..88b7af20a99 100644
--- a/arch/m68k/include/asm/atomic_mm.h
+++ b/arch/m68k/include/asm/atomic_mm.h
@@ -192,5 +192,5 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ARCH_M68K_ATOMIC __ */
diff --git a/arch/m68k/include/asm/atomic_no.h b/arch/m68k/include/asm/atomic_no.h
index 6bb674855a3..5674cb9449b 100644
--- a/arch/m68k/include/asm/atomic_no.h
+++ b/arch/m68k/include/asm/atomic_no.h
@@ -151,5 +151,5 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 #define atomic_dec_return(v) atomic_sub_return(1,(v))
 #define atomic_inc_return(v) atomic_add_return(1,(v))
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/m68k/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 49d016e6391..83bbcfd6e8f 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -59,5 +59,14 @@
 #define MCFPIT_IMR		MCFINTC_IMRL
 #define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
 
+/*
+ *  Reset Controll Unit.
+ */
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif  /* m520xsim_h */
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index bf397313e93..55183b5df1b 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -41,5 +41,14 @@
 #define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
 #define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
 
+/*
+ *  Reset Controll Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 1f63ab3fb3e..95f4f8ee8f7 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -70,5 +70,14 @@
 #define UART2_ENABLE_MASK	0x3f00 
 #endif
 
+/*
+ *  Reset Controll Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif	/* m527xsim_h */
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 28bf783a5d6..d79c49f8134 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -56,6 +56,14 @@
 #define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
 
 
+/*
+ *  Reset Control Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
 /*********************************************************************
 *
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index ce603451b55..eb7fd444894 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -127,6 +127,18 @@
 
 /*********************************************************************
  *
+ * Reset Controller Module
+ *
+ *********************************************************************/
+
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
+/*********************************************************************
+ *
  * Inter-IC (I2C) Module
  *
  *********************************************************************/
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
index 1626d37f489..9f5c4c4b3c7 100644
--- a/arch/m68k/include/asm/mman.h
+++ b/arch/m68k/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __M68K_MMAN_H__
 #define __M68K_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h
index a34b8bad784..d009f3ea39a 100644
--- a/arch/m68k/include/asm/page_mm.h
+++ b/arch/m68k/include/asm/page_mm.h
@@ -223,6 +223,6 @@ static inline __attribute_const__ int __virt_to_node_shift(void)
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _M68K_PAGE_H */
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 3a1ede4544c..9aa3f90f485 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -72,6 +72,6 @@ extern unsigned long memory_end;
 
 #endif /* __ASSEMBLY__ */
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _M68KNOMMU_PAGE_H */
diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h
index 91cba18acdd..7a1e0ba35f5 100644
--- a/arch/m68k/include/asm/processor_no.h
+++ b/arch/m68k/include/asm/processor_no.h
@@ -72,10 +72,10 @@ struct thread_struct {
 	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
 };
 
-#define INIT_THREAD  { \
-	sizeof(init_stack) + (unsigned long) init_stack, 0, \
-	PS_S, __KERNEL_DS, \
-	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+#define INIT_THREAD  {							\
+	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
+	.sr	= PS_S,							\
+	.fs	= __KERNEL_DS,						\
 }
 
 /*
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 08788fdefde..5bc09c787a1 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -103,7 +103,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/m68k/include/asm/suspend.h b/arch/m68k/include/asm/suspend.h
deleted file mode 100644
index 57b3ddb4d26..00000000000
--- a/arch/m68k/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SUSPEND_H
-#define _M68K_SUSPEND_H
-
-/* Dummy include. */
-
-#endif  /* _M68K_SUSPEND_H */
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
index 9e3054ea59e..5b754aace74 100644
--- a/arch/m68k/include/asm/swab.h
+++ b/arch/m68k/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _M68K_SWAB_H
 #define _M68K_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #define __SWAB_64_THRU_32__
diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h
index 4496c0aa837..3c0718d7439 100644
--- a/arch/m68k/include/asm/system_no.h
+++ b/arch/m68k/include/asm/system_no.h
@@ -203,113 +203,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 #include <asm-generic/cmpxchg.h>
 #endif
 
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
-	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({		\
-        local_irq_disable();		\
-        asm("				\
-        moveal #0x10c00000, %a0;	\
-        moveb #0, 0xFFFFF300;		\
-        moveal 0(%a0), %sp;		\
-        moveal 4(%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        jmp 0xf0000400;			\
-        ");				\
-})
-#elif defined(CONFIG_NETtel) || \
-      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-	moveal #0x10000044, %a0;	\
-	movel #0xffffffff, (%a0);	\
-	moveal #0x10000001, %a0;	\
-	moveb #0x00, (%a0);		\
-        moveal #0xf0000004, %a0;	\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */ 
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %%sr;		\
-	move.l	%0+0x40,%%d0;		\
-	and.l	%0+0x44,%%d0;		\
-	andi.l	#0xfffff000,%%d0;	\
-	mov.l	%%d0,%%a0;		\
-	or.l	4(%%a0),%%d0;		\
-	mov.l	%%d0,%%a0;		\
-	jmp (%%a0);"			\
-	: /* No output */		\
-	: "o" (*(char *)MCF_MBAR) );	\
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({						\
-	unsigned char volatile *reset;		\
-	asm("move.w	#0x2700, %sr");		\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
-	while(1)				\
-	*reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %sr;		\
-	movel #0x01000000, %sp;		\
-	moveal #0x40110000, %a0;	\
-	moveb #0x80, (%a0);		\
-	");				\
-})
-#elif defined(CONFIG_M520x)
-	/*
-	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
-	 * RCR), that when set, resets the MCF5208.
-	 */
-#define HARD_RESET_NOW() 		\
-({					\
-	unsigned char volatile *reset;	\
-	asm("move.w     #0x2700, %sr");	\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
-	while(1)			\
-		*reset |= 0x80;		\
-})
-#else
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        moveal #0x4, %a0;		\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-#endif
 #define arch_align_stack(x) (x)
 
 
diff --git a/arch/m68k/kernel/module.c b/arch/m68k/kernel/module.c
index 774862bc697..cd6bcb1c957 100644
--- a/arch/m68k/kernel/module.c
+++ b/arch/m68k/kernel/module.c
@@ -31,8 +31,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index f4782d2dce8..f56faa5c9cd 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -26,7 +26,6 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
-#include <asm/thread_info.h>
 #include <asm/errno.h>
 #include <asm/setup.h>
 #include <asm/segment.h>
diff --git a/arch/m68knommu/kernel/module.c b/arch/m68knommu/kernel/module.c
index 3b1a2ff61dd..d11ffae7956 100644
--- a/arch/m68knommu/kernel/module.c
+++ b/arch/m68knommu/kernel/module.c
@@ -23,8 +23,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 5985f198902..5c2bb3eeaaa 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -166,15 +166,13 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		"BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		(int) &_sdata, (int) &_edata,
-		(int) &_sbss, (int) &_ebss);
-	printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
-		(int) &_ebss, (int) memory_start,
-		(int) memory_start, (int) memory_end);
-#endif
+	pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
+		 "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
+		 (int) &_sdata, (int) &_edata,
+		 (int) &_sbss, (int) &_ebss);
+	pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
+		 (int) &_ebss, (int) memory_start,
+		 (int) memory_start, (int) memory_end);
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 7befc0c357e..b1703c67a4f 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -126,9 +126,7 @@ void __init mem_init(void)
 	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
 	unsigned long end_mem   = memory_end; /* DAVIDM - this must not include kernel stack at top */
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-#endif
+	pr_debug("Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
 
 	end_mem &= PAGE_MASK;
 	high_memory = (void *) end_mem;
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index 53a5920c2b7..f6f79874e9a 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,10 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5206_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -109,10 +104,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5206_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
-	mach_reset = coldfire_reset;
+	mach_reset = m5206_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index db902540bf2..65887799db8 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,10 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5206e_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -109,6 +104,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5206e_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -119,7 +125,7 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif /* CONFIG_NETtel */
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5206e_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 855fc6a79d7..1c43a8aec69 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -23,10 +22,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m520x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -169,9 +164,17 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m520x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = coldfire_reset;
+	mach_reset = m520x_cpu_reset;
 	m520x_uarts_init();
 	m520x_fec_init();
 }
diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 74133f27b30..961fefebca1 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -24,10 +23,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m523x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -145,13 +140,20 @@ void mcf_autovector(unsigned int vec)
 {
 	/* Everything is auto-vectored on the 523x */
 }
+/***************************************************************************/
+
+static void m523x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
 
 /***************************************************************************/
 
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
-	mach_reset = coldfire_reset;
+	mach_reset = m523x_cpu_reset;
 	m523x_uarts_init();
 	m523x_fec_init();
 }
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 9eab19d01eb..93d99882592 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -20,10 +19,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5249_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -106,10 +101,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5249_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
-	mach_reset = coldfire_reset;
+	mach_reset = m5249_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index e049245f409..5f95fcde05f 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,8 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -170,6 +167,19 @@ void mcf_settimericr(int timer, int level)
 
 /***************************************************************************/
 
+static void m5272_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to reset, and enabled */
+	__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
+	__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
+	__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 #if defined (CONFIG_MOD5272)
@@ -194,7 +204,7 @@ void __init config_BSP(char *commandp, int size)
 
 	mcf_timervector = 69;
 	mcf_profilevector = 70;
-	mach_reset = coldfire_reset;
+	mach_reset = m5272_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index 428b15922ef..f746439cfd3 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -24,10 +23,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m527x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -227,10 +222,18 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m527x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
-	mach_reset = coldfire_reset;
+	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
 }
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index bee526f4d1a..a1d1a61c4fe 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -31,10 +31,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m528x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -171,6 +167,14 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m528x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
+
+/***************************************************************************/
+
 #ifdef CONFIG_WILDFIRE
 void wildfire_halt(void)
 {
@@ -214,6 +218,7 @@ void __init config_BSP(char *commandp, int size)
 
 static int __init init_BSP(void)
 {
+	mach_reset = m528x_cpu_reset;
 	m528x_uarts_init();
 	m528x_fec_init();
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 44803bf70a6..39da9e9ff67 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -22,8 +21,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -119,6 +116,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5307_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -134,7 +142,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_timerlevel = 6;
 #endif
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5307_cpu_reset;
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index 591f2f80113..cdb761971f7 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -31,8 +31,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -164,6 +162,14 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+static void m532x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -181,7 +187,7 @@ void __init config_BSP(char *commandp, int size)
 
 	mcf_timervector = 64+32;
 	mcf_profilevector = 64+33;
-	mach_reset = coldfire_reset;
+	mach_reset = m532x_cpu_reset;
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index 0ee8c1a200c..b41d942bf8d 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,8 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -110,6 +107,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5407_cpu_reset(void)
+{
+	local_irq_disable();
+	/* set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -121,7 +129,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_timerlevel = 6;
 #endif
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5407_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/vectors.c b/arch/m68knommu/platform/coldfire/vectors.c
index 6cf89462023..bdca0297fa9 100644
--- a/arch/m68knommu/platform/coldfire/vectors.c
+++ b/arch/m68knommu/platform/coldfire/vectors.c
@@ -96,10 +96,3 @@ void ack_vector(unsigned int irq)
 }
 
 /***************************************************************************/
-
-void coldfire_reset(void)
-{
-	HARD_RESET_NOW();
-}
-
-/***************************************************************************/
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 8cc312b5d4d..b50b845fdd5 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config SWAP
 	def_bool n
@@ -49,13 +50,14 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config PCI
-	depends on !MMU
 	def_bool n
 
 config NO_DMA
-	depends on !MMU
-	def_bool n
+	def_bool y
 
 source "init/Kconfig"
 
@@ -72,7 +74,8 @@ source "kernel/Kconfig.preempt"
 source "kernel/Kconfig.hz"
 
 config MMU
-	def_bool n
+	bool "MMU support"
+	default n
 
 config NO_MMU
 	bool
@@ -105,9 +108,6 @@ config CMDLINE_FORCE
 config OF
 	def_bool y
 
-config OF_DEVICE
-	def_bool y
-
 config PROC_DEVICETREE
 	bool "Support for device tree in /proc"
 	depends on PROC_FS
@@ -118,6 +118,113 @@ config PROC_DEVICETREE
 
 endmenu
 
+menu "Advanced setup"
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	depends on MMU
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config HIGHMEM_START_BOOL
+	bool "Set high memory pool address"
+	depends on ADVANCED_OPTIONS && HIGHMEM
+	help
+	  This option allows you to set the base address of the kernel virtual
+	  area used to map high memory pages.  This can be useful in
+	  optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config HIGHMEM_START
+	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
+	depends on MMU
+	default "0xfe000000"
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	depends on MMU
+	default "0x30000000"
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory (the kernel image will be linked at
+	  this address).  This can be useful in optimizing the virtual memory
+	  layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default "0xc0000000" if MMU
+	default KERNEL_BASE_ADDR if !MMU
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	depends on MMU
+	default "0x80000000"
+
+config CONSISTENT_START_BOOL
+	bool "Set custom consistent memory pool address"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the base virtual address
+	  of the the consistent memory pool.  This pool of virtual
+	  memory is used to make consistent memory allocations.
+
+config CONSISTENT_START
+	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+	depends on MMU
+	default "0xff100000" if NOT_COHERENT_CACHE
+
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	depends on MMU
+	default "0x00200000" if NOT_COHERENT_CACHE
+
+endmenu
+
 source "mm/Kconfig"
 
 menu "Exectuable file formats"
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index aaadfa701da..d0bcf80a113 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -1,4 +1,8 @@
+ifeq ($(CONFIG_MMU),y)
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
 UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
@@ -36,6 +40,8 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 # r31 holds current when in kernel mode
 CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
+LDFLAGS		:=
+LDFLAGS_vmlinux	:=
 LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
 LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 844edf406d3..c2bb043a029 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -7,6 +7,8 @@ targets := linux.bin linux.bin.gz
 OBJCOPYFLAGS_linux.bin  := -O binary
 
 $(obj)/linux.bin: vmlinux FORCE
+	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
+	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
new file mode 100644
index 00000000000..bd0b85ec38f
--- /dev/null
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -0,0 +1,798 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Fri May 22 10:02:33 2009
+#
+CONFIG_MICROBLAZE=y
+# CONFIG_SWAP is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform options
+#
+CONFIG_PLATFORM_GENERIC=y
+CONFIG_OPT_LIB_FUNCTION=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_ALLOW_EDIT_AUTO=y
+
+#
+# Automatic platform settings from Kconfig.auto
+#
+
+#
+# Definitions for MICROBLAZE0
+#
+CONFIG_KERNEL_BASE_ADDR=0x90000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
+
+#
+# Processor type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_MMU=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_OF=y
+CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Exectuable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_HEART_BEAT=y
+CONFIG_DEBUG_BOOTMEM=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index 31820dfef56..db5294c30ca 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -1,26 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += auxvec.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += linkage.h
-header-y += msgbuf.h
-header-y += poll.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += statfs.h
-header-y += stat.h
-header-y += termbits.h
-header-y += ucontext.h
-
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += termios.h
+header-y  += elf.h
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index a448d94ab72..0de612ad7cb 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -118,6 +118,6 @@ static inline int atomic_dec_if_positive(atomic_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitsperlong.h b/arch/microblaze/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/microblaze/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index 3300b785049..f989d6aad64 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007 PetaLogix
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
  * based on v850 version which was
  * Copyright (C) 2001,02,03 NEC Electronics Corporation
@@ -43,6 +44,23 @@
 #define flush_icache_range(start, len)	__invalidate_icache_range(start, len)
 #define flush_icache_page(vma, pg)		do { } while (0)
 
+#ifndef CONFIG_MMU
+# define flush_icache_user_range(start, len)	do { } while (0)
+#else
+# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all()
+
+# define flush_page_to_ram(page)		do { } while (0)
+
+# define flush_icache()			__invalidate_icache_all()
+# define flush_cache_sigtramp(vaddr) \
+			__invalidate_icache_range(vaddr, vaddr + 8)
+
+# define flush_dcache_mmap_lock(mapping)	do { } while (0)
+# define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+# define flush_cache_dup_mm(mm)			do { } while (0)
+#endif
+
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 92b30762ce5..97ea46b5cf8 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -51,7 +51,8 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+								__wsum sum);
 
 /*
  * the same as csum_partial_copy, but copies from user space.
@@ -59,8 +60,8 @@ extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
-					int len, int sum, int *csum_err);
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					int len, __wsum sum, int *csum_err);
 
 #define csum_partial_copy_nocheck(src, dst, len, sum)	\
 	csum_partial_copy((src), (dst), (len), (sum))
@@ -75,11 +76,12 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
 /*
  *	Fold a partial checksum
  */
-static inline __sum16 csum_fold(unsigned int sum)
+static inline __sum16 csum_fold(__wsum csum)
 {
+	u32 sum = (__force u32)csum;
 	sum = (sum & 0xffff) + (sum >> 16);
 	sum = (sum & 0xffff) + (sum >> 16);
-	return ~sum;
+	return (__force __sum16)~sum;
 }
 
 static inline __sum16
@@ -93,6 +95,6 @@ csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
+extern __sum16 ip_compute_csum(const void *buff, int len);
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
index 8375ea991e2..29303ed825c 100644
--- a/arch/microblaze/include/asm/current.h
+++ b/arch/microblaze/include/asm/current.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,12 @@
 #ifndef _ASM_MICROBLAZE_CURRENT_H
 #define _ASM_MICROBLAZE_CURRENT_H
 
+/*
+ * Register used to hold the current task pointer while in the kernel.
+ * Any `call clobbered' register without a special meaning should be OK,
+ * but check asm/microblaze/kernel/entry.S to be sure.
+ */
+#define CURRENT_TASK	r31
 # ifndef __ASSEMBLY__
 /*
  * Dedicate r31 to keeping the current task pointer
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 17336252a9b..d00e4009916 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -1,129 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
-#define _ASM_MICROBLAZE_DMA_MAPPING_H
-
-#include <asm/cacheflush.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-struct scatterlist;
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-/* FIXME */
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	enum dma_data_direction direction)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-		enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-		enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, int flag)
-{
-	return NULL; /* consistent_alloc(flag, size, dma_handle); */
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-			void *vaddr, dma_addr_t dma_handle)
-{
-	BUG();
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	switch (direction) {
-	case DMA_FROM_DEVICE:
-		flush_dcache_range((unsigned)dma_addr,
-			(unsigned)dma_addr + size);
-			/* Fall through */
-	case DMA_TO_DEVICE:
-		break;
-	default:
-		BUG();
-	}
-}
-
-#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
+#include <asm-generic/dma-mapping-broken.h>
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
index 0967fa04fc5..08c073badf1 100644
--- a/arch/microblaze/include/asm/dma.h
+++ b/arch/microblaze/include/asm/dma.h
@@ -9,8 +9,13 @@
 #ifndef _ASM_MICROBLAZE_DMA_H
 #define _ASM_MICROBLAZE_DMA_H
 
+#ifndef CONFIG_MMU
 /* we don't have dma address limit. define it as zero to be
  * unlimited. */
 #define MAX_DMA_ADDRESS		(0)
+#else
+/* Virtual address corresponding to last available physical memory address.  */
+#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
+#endif
 
 #endif /* _ASM_MICROBLAZE_DMA_H */
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
index 81337f24134..f92fc0dda00 100644
--- a/arch/microblaze/include/asm/elf.h
+++ b/arch/microblaze/include/asm/elf.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -27,4 +29,95 @@
  */
 #define ELF_CLASS	ELFCLASS32
 
+#ifndef __uClinux__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/byteorder.h>
+
+#ifndef ELF_GREG_T
+#define ELF_GREG_T
+typedef unsigned long elf_greg_t;
+#endif
+
+#ifndef ELF_NGREG
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+#endif
+
+#ifndef ELF_GREGSET_T
+#define ELF_GREGSET_T
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#endif
+
+#ifndef ELF_FPREGSET_T
+#define ELF_FPREGSET_T
+
+/* TBD */
+#define ELF_NFPREG	33	/* includes fsr */
+typedef unsigned long elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* typedef struct user_fpu_struct elf_fpregset_t; */
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+
+#define ELF_CORE_COPY_REGS(_dest, _regs)			\
+	memcpy((char *) &_dest, (char *) _regs,		\
+	sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+/* Added _f parameter. Is this definition correct: TBD */
+#define ELF_PLAT_INIT(_r, _f)				\
+do {							\
+	_r->r1 =  _r->r1 =  _r->r2 =  _r->r3 =		\
+	_r->r4 =  _r->r5 =  _r->r6 =  _r->r7 =		\
+	_r->r8 =  _r->r9 =  _r->r10 = _r->r11 =		\
+	_r->r12 = _r->r13 = _r->r14 = _r->r15 =		\
+	_r->r16 = _r->r17 = _r->r18 = _r->r19 =		\
+	_r->r20 = _r->r21 = _r->r22 = _r->r23 =		\
+	_r->r24 = _r->r25 = _r->r26 = _r->r27 =		\
+	_r->r28 = _r->r29 = _r->r30 = _r->r31 =		\
+	0;						\
+} while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __uClinux__ */
+
 #endif /* _ASM_MICROBLAZE_ELF_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index e4c3aef884d..61abbd23264 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -1,8 +1,8 @@
 /*
  * Definitions used by low-level trap handlers
  *
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2007 - 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -31,7 +31,40 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
 # endif /* __ASSEMBLY__ */
 
+#ifndef CONFIG_MMU
+
 /* noMMU hasn't any space for args */
 # define STATE_SAVE_ARG_SPACE	(0)
 
+#else /* CONFIG_MMU */
+
+/* If true, system calls save and restore all registers (except result
+ * registers, of course).  If false, then `call clobbered' registers
+ * will not be preserved, on the theory that system calls are basically
+ * function calls anyway, and the caller should be able to deal with it.
+ * This is a security risk, of course, as `internal' values may leak out
+ * after a system call, but that certainly doesn't matter very much for
+ * a processor with no MMU protection!  For a protected-mode kernel, it
+ * would be faster to just zero those registers before returning.
+ *
+ * I can not rely on the glibc implementation. If you turn it off make
+ * sure that r11/r12 is saved in user-space. --KAA
+ *
+ * These are special variables using by the kernel trap/interrupt code
+ * to save registers in, at a time when there are no spare registers we
+ * can use to do so, and we can't depend on the value of the stack
+ * pointer.  This means that they must be within a signed 16-bit
+ * displacement of 0x00000000.
+ */
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+ * suitable for a function call stack frame. */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+ * C calling conventions, in addition to the space used by the struct
+ * pt_regs that actually holds saved values. */
+#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments */
+
+#endif /* CONFIG_MMU */
+
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 24ca540e77c..90731df9e57 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -1,8 +1,8 @@
 /*
  * Preliminary support for HW exception handing for Microblaze
  *
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -64,21 +64,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#if defined(CONFIG_XMON)
-extern void xmon(struct pt_regs *regs);
-extern int xmon_bpt(struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
-extern int xmon_dabr_match(struct pt_regs *regs);
-extern void (*xmon_fault_handler)(struct pt_regs *regs);
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data);
+int bad_trap(int trap_num, struct pt_regs *regs);
+int debug_trap(struct pt_regs *regs);
+#endif /* CONFIG_MMU */
 
-void (*debugger)(struct pt_regs *regs) = xmon;
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#elif defined(CONFIG_KGDB)
+#if defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);
 int (*debugger_sstep)(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h
index acf0da543ef..6847c1512c7 100644
--- a/arch/microblaze/include/asm/flat.h
+++ b/arch/microblaze/include/asm/flat.h
@@ -13,7 +13,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp) /* nothing needed */
 #define	flat_argvp_envp_on_stack()	0
 #define	flat_old_ram_flag(flags)	(flags)
 #define	flat_reloc_valid(reloc, size)	((reloc) <= (size))
diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
index ea04632399d..2345ac354d9 100644
--- a/arch/microblaze/include/asm/gpio.h
+++ b/arch/microblaze/include/asm/gpio.h
@@ -11,8 +11,8 @@
  * (at your option) any later version.
  */
 
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
+#ifndef _ASM_MICROBLAZE_GPIO_H
+#define _ASM_MICROBLAZE_GPIO_H
 
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
@@ -53,4 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* CONFIG_GPIOLIB */
 
-#endif /* __ASM_POWERPC_GPIO_H */
+#endif /* _ASM_MICROBLAZE_GPIO_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 8b5853ee6b5..5c173424d07 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -12,6 +14,9 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/mm.h>          /* Get struct page {...} */
+
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
@@ -112,6 +117,30 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
 #define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
 
+#ifdef CONFIG_MMU
+
+#define mm_ptov(addr)		((void *)__phys_to_virt(addr))
+#define mm_vtop(addr)		((unsigned long)__virt_to_phys(addr))
+#define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
+#define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
+#define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
+
+#define __page_address(page) \
+		(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
+#define page_to_bus(page)	(page_to_phys(page))
+#define bus_to_virt(addr)	(phys_to_virt(addr))
+
+extern void iounmap(void *addr);
+/*extern void *__ioremap(phys_addr_t address, unsigned long size,
+		unsigned long flags);*/
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_nocache(addr, size)      ioremap((addr), (size))
+#define ioremap_fullcache(addr, size)    ioremap((addr), (size))
+
+#else /* CONFIG_MMU */
+
 /**
  *	virt_to_phys - map virtual addresses to physical
  *	@address: address to remap
@@ -160,6 +189,8 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define iounmap(addr)		((void)0)
 #define ioremap_nocache(physaddr, size)	ioremap(physaddr, size)
 
+#endif /* CONFIG_MMU */
+
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 0e0431d6163..66cad6a99d7 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,11 +11,109 @@
 #ifndef _ASM_MICROBLAZE_MMU_H
 #define _ASM_MICROBLAZE_MMU_H
 
-#ifndef __ASSEMBLY__
+# ifndef CONFIG_MMU
+#  ifndef __ASSEMBLY__
 typedef struct {
 	struct vm_list_struct	*vmlist;
 	unsigned long		end_brk;
 } mm_context_t;
-#endif /* __ASSEMBLY__ */
+#  endif /* __ASSEMBLY__ */
+# else /* CONFIG_MMU */
+#  ifdef __KERNEL__
+#   ifndef __ASSEMBLY__
 
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+	unsigned long    v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long    h:1;	/* Hash algorithm indicator */
+	unsigned long  api:6;	/* Abbreviated page index */
+	unsigned long  rpn:20;	/* Real (physical) page number */
+	unsigned long     :3;	/* Unused */
+	unsigned long    r:1;	/* Referenced */
+	unsigned long    c:1;	/* Changed */
+	unsigned long    w:1;	/* Write-thru cache mode */
+	unsigned long    i:1;	/* Cache inhibited */
+	unsigned long    m:1;	/* Memory coherence */
+	unsigned long    g:1;	/* Guarded */
+	unsigned long     :1;	/* Unused */
+	unsigned long   pp:2;	/* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#  define PP_RWXX	0 /* Supervisor read/write, User none */
+#  define PP_RWRX	1 /* Supervisor read/write, User read */
+#  define PP_RWRW	2 /* Supervisor read/write, User read/write */
+#  define PP_RXRX	3 /* Supervisor read,       User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+	unsigned long    t:1;	/* Normal or I/O  type */
+	unsigned long   ks:1;	/* Supervisor 'key' (normally 0) */
+	unsigned long   kp:1;	/* User 'key' (normally 1) */
+	unsigned long    n:1;	/* No-execute */
+	unsigned long     :4;	/* Unused */
+	unsigned long vsid:24;	/* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va);	/* invalidate a TLB entry */
+extern void _tlbia(void);		/* invalidate all TLB entries */
+#   endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+#  define MICROBLAZE_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+#  define TLB_LO		1
+#  define TLB_HI		0
+#  define TLB_DATA		TLB_LO
+#  define TLB_TAG		TLB_HI
+
+/* Tag portion */
+#  define TLB_EPN_MASK		0xFFFFFC00 /* Effective Page Number */
+#  define TLB_PAGESZ_MASK	0x00000380
+#  define TLB_PAGESZ(x)		(((x) & 0x7) << 7)
+#  define PAGESZ_1K		0
+#  define PAGESZ_4K		1
+#  define PAGESZ_16K		2
+#  define PAGESZ_64K		3
+#  define PAGESZ_256K		4
+#  define PAGESZ_1M		5
+#  define PAGESZ_4M		6
+#  define PAGESZ_16M		7
+#  define TLB_VALID		0x00000040 /* Entry is valid */
+
+/* Data portion */
+#  define TLB_RPN_MASK		0xFFFFFC00 /* Real Page Number */
+#  define TLB_PERM_MASK		0x00000300
+#  define TLB_EX		0x00000200 /* Instruction execution allowed */
+#  define TLB_WR		0x00000100 /* Writes permitted */
+#  define TLB_ZSEL_MASK		0x000000F0
+#  define TLB_ZSEL(x)		(((x) & 0xF) << 4)
+#  define TLB_ATTR_MASK		0x0000000F
+#  define TLB_W			0x00000008 /* Caching is write-through */
+#  define TLB_I			0x00000004 /* Caching is inhibited */
+#  define TLB_M			0x00000002 /* Memory is coherent */
+#  define TLB_G			0x00000001 /* Memory is guarded from prefetch */
+
+#  endif /* __KERNEL__ */
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_MMU_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 150ca01b74b..385fed16bbf 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,21 +1,5 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
+#ifdef CONFIG_MMU
+# include "mmu_context_mm.h"
+#else
+# include "mmu_context_no.h"
+#endif
diff --git a/arch/microblaze/include/asm/mmu_context_mm.h b/arch/microblaze/include/asm/mmu_context_mm.h
new file mode 100644
index 00000000000..3e5c254e8d1
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_mm.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm-generic/mm_hooks.h>
+
+# ifdef __KERNEL__
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.
+ */
+# define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   MicroBlaze has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+# define NO_CONTEXT	256
+# define LAST_CONTEXT	255
+# define FIRST_CONTEXT	1
+
+/*
+ * Set the current MMU context.
+ * This is done byloading up the segment registers for the user part of the
+ * address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * Since we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	mm_context_t ctx;
+
+	if (mm->context != NO_CONTEXT)
+		return;
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context = ctx;
+	context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+# define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != NO_CONTEXT) {
+		clear_bit(mm->context, context_map);
+		mm->context = NO_CONTEXT;
+		atomic_inc(&nr_free_contexts);
+	}
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	tsk->thread.pgdir = next->pgd;
+	get_mmu_context(next);
+	set_context(next->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *active_mm,
+			struct mm_struct *mm)
+{
+	current->thread.pgdir = mm->pgd;
+	get_mmu_context(mm);
+	set_context(mm->context, mm->pgd);
+}
+
+extern void mmu_context_init(void);
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
new file mode 100644
index 00000000000..ba556719015
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_no.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+# define init_new_context(tsk, mm)		({ 0; })
+
+# define enter_lazy_tlb(mm, tsk)		do {} while (0)
+# define change_mm_context(old, ctx, _pml4)	do {} while (0)
+# define destroy_context(mm)			do {} while (0)
+# define deactivate_mm(tsk, mm)			do {} while (0)
+# define switch_mm(prev, next, tsk)		do {} while (0)
+# define activate_mm(prev, next)		do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 7238dcfcc51..72aceae8868 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -1,6 +1,8 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * VM ops
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  * Changes for MMU support:
  *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
@@ -15,14 +17,15 @@
 
 #include <linux/pfn.h>
 #include <asm/setup.h>
+#include <linux/const.h>
+
+#ifdef __KERNEL__
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
@@ -35,6 +38,7 @@
 /* align addr on a size boundary - adjust address up if needed */
 #define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
 
+#ifndef CONFIG_MMU
 /*
  * PAGE_OFFSET -- the first address of the first page of memory. When not
  * using MMU this corresponds to the first free page in physical memory (aligned
@@ -43,15 +47,44 @@
 extern unsigned int __page_offset;
 #define PAGE_OFFSET __page_offset
 
-#define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
-#define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)		free_page(addr)
+#else /* CONFIG_MMU */
 
-#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. With MMU
+ * it is set to the kernel start address (aligned on a page boundary).
+ *
+ * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
+ * in arch/microblaze/Makefile.
+ */
+#define PAGE_OFFSET	CONFIG_KERNEL_START
 
+/*
+ * MAP_NR -- given an address, calculate the index of the page struct which
+ * points to the address's page.
+ */
+#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
 
-#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
-#define copy_user_page(vto, vfrom, vaddr, topg) \
+/*
+ * The basic type of a PTE - 32 bit physical addressing.
+ */
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#define PTE_FMT		"%.8lx"
+
+#endif /* CONFIG_MMU */
+
+#  ifndef CONFIG_MMU
+#  define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+#  define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
+#  define free_user_page(page, addr)		free_page(addr)
+#  else /* CONFIG_MMU */
+extern void copy_page(void *to, void *from);
+#  endif /* CONFIG_MMU */
+
+# define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+
+# define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+# define copy_user_page(vto, vfrom, vaddr, topg) \
 			memcpy((vto), (vfrom), PAGE_SIZE)
 
 /*
@@ -60,21 +93,32 @@ extern unsigned int __page_offset;
 typedef struct page *pgtable_t;
 typedef struct { unsigned long	pte; }		pte_t;
 typedef struct { unsigned long	pgprot; }	pgprot_t;
+/* FIXME this can depend on linux kernel version */
+#   ifdef CONFIG_MMU
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#   else /* CONFIG_MMU */
 typedef struct { unsigned long	ste[64]; }	pmd_t;
 typedef struct { pmd_t		pue[1]; }	pud_t;
 typedef struct { pud_t		pge[1]; }	pgd_t;
+#   endif /* CONFIG_MMU */
 
+# define pte_val(x)	((x).pte)
+# define pgprot_val(x)	((x).pgprot)
 
-#define pte_val(x)	((x).pte)
-#define pgprot_val(x)	((x).pgprot)
-#define pmd_val(x)	((x).ste[0])
-#define pud_val(x)	((x).pue[0])
-#define pgd_val(x)	((x).pge[0])
+#   ifdef CONFIG_MMU
+#   define pmd_val(x)      ((x).pmd)
+#   define pgd_val(x)      ((x).pgd)
+#   else  /* CONFIG_MMU */
+#   define pmd_val(x)	((x).ste[0])
+#   define pud_val(x)	((x).pue[0])
+#   define pgd_val(x)	((x).pge[0])
+#   endif  /* CONFIG_MMU */
 
-#define __pte(x)	((pte_t) { (x) })
-#define __pmd(x)	((pmd_t) { (x) })
-#define __pgd(x)	((pgd_t) { (x) })
-#define __pgprot(x)	((pgprot_t) { (x) })
+# define __pte(x)	((pte_t) { (x) })
+# define __pmd(x)	((pmd_t) { (x) })
+# define __pgd(x)	((pgd_t) { (x) })
+# define __pgprot(x)	((pgprot_t) { (x) })
 
 /**
  * Conversions for virtual address, physical address, pfn, and struct
@@ -94,47 +138,83 @@ extern unsigned long max_low_pfn;
 extern unsigned long min_low_pfn;
 extern unsigned long max_pfn;
 
-#define __pa(vaddr)		((unsigned long) (vaddr))
-#define __va(paddr)		((void *) (paddr))
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern unsigned long memory_size;
 
-#define phys_to_pfn(phys)	(PFN_DOWN(phys))
-#define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
+extern int page_is_ram(unsigned long pfn);
 
-#define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
-#define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
+# define phys_to_pfn(phys)	(PFN_DOWN(phys))
+# define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
 
-#define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
-#define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+# define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
+# define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
 
-#define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
-#define page_to_bus(page)	(page_to_phys(page))
-#define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+#  ifdef CONFIG_MMU
+#  define virt_to_page(kaddr) 	(mem_map +  MAP_NR(kaddr))
+#  else /* CONFIG_MMU */
+#  define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
+#  define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+#  define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
+#  define page_to_bus(page)	(page_to_phys(page))
+#  define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+#  endif /* CONFIG_MMU */
 
-extern unsigned int memory_start;
-extern unsigned int memory_end;
-extern unsigned int memory_size;
+#  ifndef CONFIG_MMU
+#  define pfn_valid(pfn)	((pfn) >= min_low_pfn && (pfn) <= max_mapnr)
+#  define ARCH_PFN_OFFSET	(PAGE_OFFSET >> PAGE_SHIFT)
+#  else /* CONFIG_MMU */
+#  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
+#  define pfn_valid(pfn)	((pfn) < (max_mapnr + ARCH_PFN_OFFSET))
+#  define VALID_PAGE(page) 	((page - mem_map) < max_mapnr)
+#  endif /* CONFIG_MMU */
 
-#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+# endif /* __ASSEMBLY__ */
 
-#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+#define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
-#else
-#define tophys(rd, rs)	(addik rd, rs, 0)
-#define tovirt(rd, rs)	(addik rd, rs, 0)
-#endif /* __ASSEMBLY__ */
 
-#define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+#  ifndef CONFIG_MMU
+#  define __pa(vaddr)	((unsigned long) (vaddr))
+#  define __va(paddr)	((void *) (paddr))
+#  else /* CONFIG_MMU */
+#  define __pa(x)	__virt_to_phys((unsigned long)(x))
+#  define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
+#  endif /* CONFIG_MMU */
+
 
-/* Convert between virtual and physical address for MMU.  */
-/* Handle MicroBlaze processor with virtual memory.  */
+/* Convert between virtual and physical address for MMU. */
+/* Handle MicroBlaze processor with virtual memory. */
+#ifndef CONFIG_MMU
 #define __virt_to_phys(addr)	addr
 #define __phys_to_virt(addr)	addr
+#define tophys(rd, rs)	addik rd, rs, 0
+#define tovirt(rd, rs)	addik rd, rs, 0
+#else
+#define __virt_to_phys(addr) \
+	((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define __phys_to_virt(addr) \
+	((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#define tophys(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define tovirt(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#endif /* CONFIG_MMU */
 
 #define TOPHYS(addr)  __virt_to_phys(addr)
 
+#ifdef CONFIG_MMU
+#ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
+#define WANT_PAGE_VIRTUAL 1 /* page alloc 2 relies on this */
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif /* CONFIG_MMU */
+
 #endif /* __KERNEL__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_MICROBLAZE_PAGE_H */
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 2a4b3548401..59a757e46ba 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,195 @@
 #ifndef _ASM_MICROBLAZE_PGALLOC_H
 #define _ASM_MICROBLAZE_PGALLOC_H
 
+#ifdef CONFIG_MMU
+
+#include <linux/kernel.h>	/* For min/max macros */
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define PGDIR_ORDER	0
+
+/*
+ * This is handled very differently on MicroBlaze since out page tables
+ * are all 0's and I want to be able to use these zero'd pages elsewhere
+ * as well - it gives us quite a speedup.
+ * -- Cort
+ */
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+} quicklists;
+
+#define pgd_quicklist		(quicklists.pgd_cache)
+#define pmd_quicklist		((unsigned long *)0)
+#define pte_quicklist		(quicklists.pte_cache)
+#define pgtable_cache_size	(quicklists.pgtable_cache_sz)
+
+extern unsigned long *zero_cache; /* head linked list of pre-zero'd pages */
+extern atomic_t zero_sz; /* # currently pre-zero'd pages */
+extern atomic_t zeropage_hits; /* # zero'd pages request that we've done */
+extern atomic_t zeropage_calls; /* # zero'd pages request that've been made */
+extern atomic_t zerototal; /* # pages zero'd over time */
+
+#define zero_quicklist		(zero_cache)
+#define zero_cache_sz	 	(zero_sz)
+#define zero_cache_calls	(zeropage_calls)
+#define zero_cache_hits		(zeropage_hits)
+#define zero_cache_total	(zerototal)
+
+/*
+ * return a pre-zero'd page from the list,
+ * return NULL if none available -- Cort
+ */
+extern unsigned long get_zero_page_fast(void);
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern inline pgd_t *get_pgd_slow(void)
+{
+	pgd_t *ret;
+
+	ret = (pgd_t *)__get_free_pages(GFP_KERNEL, PGDIR_ORDER);
+	if (ret != NULL)
+		clear_page(ret);
+	return ret;
+}
+
+extern inline pgd_t *get_pgd_fast(void)
+{
+	unsigned long *ret;
+
+	ret = pgd_quicklist;
+	if (ret != NULL) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	} else
+		ret = (unsigned long *)get_pgd_slow();
+	return (pgd_t *)ret;
+}
+
+extern inline void free_pgd_fast(pgd_t *pgd)
+{
+	*(unsigned long **)pgd = pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	pgtable_cache_size++;
+}
+
+extern inline void free_pgd_slow(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+#define pgd_free(mm, pgd)        free_pgd_fast(pgd)
+#define pgd_alloc(mm)		get_pgd_fast()
+
+#define pmd_pgtable(pmd)	pmd_page(pmd)
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one_fast(mm, address)	({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
+/* FIXME two definition - look below */
+#define pmd_free(mm, x)			do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+		unsigned long address)
+{
+	pte_t *pte;
+	extern int mem_init_done;
+	extern void *early_get_page(void);
+	if (mem_init_done) {
+		pte = (pte_t *)__get_free_page(GFP_KERNEL |
+					__GFP_REPEAT | __GFP_ZERO);
+	} else {
+		pte = (pte_t *)early_get_page();
+		if (pte)
+			clear_page(pte);
+	}
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+		unsigned long address)
+{
+	struct page *ptepage;
+
+#ifdef CONFIG_HIGHPTE
+	int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+#else
+	int flags = GFP_KERNEL | __GFP_REPEAT;
+#endif
+
+	ptepage = alloc_pages(flags, 0);
+	if (ptepage)
+		clear_highpage(ptepage);
+	return ptepage;
+}
+
+static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm,
+		unsigned long address)
+{
+	unsigned long *ret;
+
+	ret = pte_quicklist;
+	if (ret != NULL) {
+		pte_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	}
+	return (pte_t *)ret;
+}
+
+extern inline void pte_free_fast(pte_t *pte)
+{
+	*(unsigned long **)pte = pte_quicklist;
+	pte_quicklist = (unsigned long *) pte;
+	pgtable_cache_size++;
+}
+
+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+extern inline void pte_free_slow(struct page *ptepage)
+{
+	__free_page(ptepage);
+}
+
+extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+{
+	__free_page(ptepage);
+}
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+
+#define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = page_address(pte))
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		(pmd_val(*(pmd)) = (unsigned long) (pte))
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
+/*#define pmd_free(mm, x)			do { } while (0)*/
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+extern int do_check_pgt_cache(int, int);
+
+#endif /* CONFIG_MMU */
+
 #define check_pgt_cache()	do {} while (0)
 
 #endif /* _ASM_MICROBLAZE_PGALLOC_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4df31e46568..4c57a586a98 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,8 @@
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#ifndef CONFIG_MMU
+
 #define pgd_present(pgd)	(1) /* pages are always present on non MMU */
 #define pgd_none(pgd)		(0)
 #define pgd_bad(pgd)		(0)
@@ -27,6 +31,8 @@
 #define PAGE_READONLY		__pgprot(0) /* these mean nothing to non MMU */
 #define PAGE_KERNEL		__pgprot(0) /* these mean nothing to non MMU */
 
+#define pgprot_noncached(x)	(x)
+
 #define __swp_type(x)		(0)
 #define __swp_offset(x)		(0)
 #define __swp_entry(typ, off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
@@ -45,6 +51,538 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 #define arch_enter_lazy_cpu_mode()	do {} while (0)
 
+#else /* CONFIG_MMU */
+
+#include <asm-generic/4level-fixup.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+#define FIRST_USER_ADDRESS	0
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+/* Start and end of the vmalloc area. */
+/* Make sure to map the vmalloc area above the pinned kernel memory area
+   of 32Mb.  */
+#define VMALLOC_START	(CONFIG_KERNEL_START + \
+				max(32 * 1024 * 1024UL, memory_size))
+#define VMALLOC_END	ioremap_bot
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
+ * table containing PTEs, together with a set of 16 segment registers, to
+ * define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ */
+
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	PMD_SHIFT
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
+		__FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
+		__FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+		__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PTE as closely as possible.
+ */
+
+/* There are several potential gotchas here.  The hardware TLBLO
+ * field looks like this:
+ *
+ * 0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap cache
+ * entries use the top 30 bits.  Because 4xx doesn't support SMP
+ * anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+ * is cleared in the TLB miss handler before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ *  * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits.  We actually use use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+/* Definitions for MicroBlaze. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+#define _PMD_PRESENT	PAGE_MASK
+
+/*
+ * Some bits are unused...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK	0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+
+#define _PAGE_KERNEL \
+	(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X \
+		__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_SHARED)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_IO)
+
+/*
+ * We consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep) \
+	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define	pmd_present(pmd)	((pmd_val(pmd) & _PMD_PRESENT) != 0)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#define pte_page(x)		(mem_map + (unsigned long) \
+				((pte_val(x) - memory_start) >> PAGE_SHIFT))
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) | pgprot_val(prot))
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+#define pgd_clear(xp)				do { } while (0)
+#define pgd_page(pgd) \
+	((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+/* FIXME */
+static inline int pte_file(pte_t pte)		{ return 0; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) \
+		{ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = physpage | pgprot_val(pgprot);
+	return pte;
+}
+
+#define mk_pte(page, pgprot) \
+({									   \
+	pte_t pte;							   \
+	pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) |  \
+			pgprot_val(pgprot);				   \
+	pte;								   \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+				unsigned long set)
+{
+	unsigned long old, tmp, msr;
+
+	__asm__ __volatile__("\
+	msrclr	%2, 0x2\n\
+	nop\n\
+	lw	%0, %4, r0\n\
+	andn	%1, %0, %5\n\
+	or	%1, %1, %6\n\
+	sw	%1, %4, r0\n\
+	mts     rmsr, %2\n\
+	nop"
+	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
+	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc");
+
+	return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte(struct mm_struct *mm, unsigned long addr,
+		pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+		pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline int ptep_test_and_clear_young(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
+}
+
+static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, \
+		(_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}*/
+
+static inline void ptep_mkdirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, 0, _PAGE_DIRTY);
+}
+
+/*#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
+
+/* Convert pmd entry to page */
+/* our pmd entry is an effective address of pte table*/
+/* returns effective address of the pmd entry*/
+#define pmd_page_kernel(pmd)	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+
+/* returns struct *page of the pmd entry*/
+#define pmd_page(pmd)	(pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) })
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_page is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit
+ * (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 6)
+#define __swp_entry(type, offset) \
+		((swp_entry_t) { (type) | ((offset) << 6) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
+
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk(unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+/* extern unsigned long mm_ptov(unsigned long addr) \
+	__attribute__ ((const)); TBD */
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ * compilation errors.
+ */
+#define	IOMAP_FULL_CACHING	0
+#define	IOMAP_NOCACHE_SER	1
+#define	IOMAP_NOCACHE_NONSER	2
+#define	IOMAP_NO_COPYBACK	3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+				int nocacheflag, unsigned long *memavailp);
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode(unsigned long address, unsigned long size,
+				unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range remap_page_range
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code);
+
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags);
+
+void __init adjust_total_lowmem(void);
+void mapin_ram(void);
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+extern int mem_init_done;
+extern unsigned long ioremap_base;
+extern unsigned long ioremap_bot;
+
+asmlinkage void __init mmu_init(void);
+
+void __init *early_get_page(void);
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_MMU */
+
 #ifndef __ASSEMBLY__
 #include <asm-generic/pgtable.h>
 
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index b4df41c5dde..8c758b231f3 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -16,7 +16,7 @@
  */
 
 typedef unsigned long	__kernel_ino_t;
-typedef unsigned int	__kernel_mode_t;
+typedef unsigned short	__kernel_mode_t;
 typedef unsigned int	__kernel_nlink_t;
 typedef long		__kernel_off_t;
 typedef int		__kernel_pid_t;
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 9329029d261..563c6b9453f 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -26,14 +26,15 @@ extern const struct seq_operations cpuinfo_op;
 # define cpu_sleep()		do {} while (0)
 # define prepare_to_copy(tsk)	do {} while (0)
 
-# endif /* __ASSEMBLY__ */
-
 #define task_pt_regs(tsk) \
 		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
 
 /* Do necessary setup to start up a newly executed thread. */
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
 
+# endif /* __ASSEMBLY__ */
+
+# ifndef CONFIG_MMU
 /*
  * User space process size: memory size
  *
@@ -85,4 +86,90 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 # define KSTK_EIP(tsk)	(0)
 # define KSTK_ESP(tsk)	(0)
 
+# else /* CONFIG_MMU */
+
+/*
+ * This is used to define STACK_TOP, and with MMU it must be below
+ * kernel base to select the correct PGD when handling MMU exceptions.
+ */
+# define TASK_SIZE	(CONFIG_KERNEL_START)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+# define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+
+# define THREAD_KSP	0
+
+#  ifndef __ASSEMBLY__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#  define current_text_addr()	({ __label__ _l; _l: &&_l; })
+
+/* If you change this, you must change the associated assembly-languages
+ * constants defined below, THREAD_*.
+ */
+struct thread_struct {
+	/* kernel stack pointer (must be first field in structure) */
+	unsigned long	ksp;
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+	void		*pgdir;		/* root of page-table tree */
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+};
+
+#  define INIT_THREAD { \
+	.ksp   = sizeof init_stack + (unsigned long)init_stack, \
+	.pgdir = swapper_pg_dir, \
+}
+
+/* Do necessary setup to start up a newly executed thread.  */
+void start_thread(struct pt_regs *regs,
+		unsigned long pc, unsigned long usp);
+
+/* Free all resources held by a thread. */
+extern inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Free current thread data structures etc.  */
+static inline void exit_thread(void)
+{
+}
+
+/* Return saved (kernel) PC of a blocked thread.  */
+#  define thread_saved_pc(tsk)	\
+	((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* The size allocated for kernel stacks. This _must_ be a power of two! */
+# define KERNEL_STACK_SIZE	0x2000
+
+/* Return some info about the user process TASK.  */
+#  define task_tos(task)	((unsigned long)(task) + KERNEL_STACK_SIZE)
+#  define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
+
+#  define task_pt_regs_plus_args(tsk) \
+	(((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE)
+
+#  define task_sp(task)	(task_regs(task)->r1)
+#  define task_pc(task)	(task_regs(task)->pc)
+/* Grotty old names for some.  */
+#  define KSTK_EIP(task)	(task_pc(task))
+#  define KSTK_ESP(task)	(task_sp(task))
+
+/* FIXME */
+#  define deactivate_mm(tsk, mm)	do { } while (0)
+
+#  define STACK_TOP	TASK_SIZE
+#  define STACK_TOP_MAX	STACK_TOP
+
+#  endif /* __ASSEMBLY__ */
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index 55015bce5e4..a917dc51773 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -10,7 +10,6 @@
 #define _ASM_MICROBLAZE_PTRACE_H
 
 #ifndef __ASSEMBLY__
-#include <linux/types.h>
 
 typedef unsigned long microblaze_reg_t;
 
diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h
index 834142d9356..68c3afb7387 100644
--- a/arch/microblaze/include/asm/registers.h
+++ b/arch/microblaze/include/asm/registers.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -30,4 +30,21 @@
 #define FSR_UF		(1<<1) /* Underflow */
 #define FSR_DO		(1<<0) /* Denormalized operand error */
 
+# ifdef CONFIG_MMU
+/* Machine State Register (MSR) Fields */
+# define MSR_UM		(1<<11) /* User Mode */
+# define MSR_UMS	(1<<12) /* User Mode Save */
+# define MSR_VM		(1<<13) /* Virtual Mode */
+# define MSR_VMS	(1<<14) /* Virtual Mode Save */
+
+# define MSR_KERNEL	(MSR_EE | MSR_VM)
+/* # define MSR_USER	(MSR_KERNEL | MSR_UM | MSR_IE) */
+# define MSR_KERNEL_VMS	(MSR_EE | MSR_VMS)
+/* # define MSR_USER_VMS	(MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
+
+/* Exception State Register (ESR) Fields */
+# define	  ESR_DIZ	(1<<11) /* Zone Protection */
+# define	  ESR_S		(1<<10) /* Store instruction */
+
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_REGISTERS_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index 8434a43e542..4487e150b45 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,7 @@
 # ifndef __ASSEMBLY__
 extern char _ssbss[], _esbss[];
 extern unsigned long __ivt_start[], __ivt_end[];
+extern char _etext[], _stext[];
 
 #  ifdef CONFIG_MTD_UCLINUX
 extern char *_ebss;
diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h
index 7f5dcc56eea..0e7102c3fb1 100644
--- a/arch/microblaze/include/asm/segment.h
+++ b/arch/microblaze/include/asm/segment.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_SEGMENT_H
 #define _ASM_MICROBLAZE_SEGMENT_H
 
-#ifndef __ASSEMBLY__
+# ifndef __ASSEMBLY__
 
 typedef struct {
 	unsigned long seg;
@@ -29,15 +29,21 @@ typedef struct {
  *
  * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
  */
-#  define KERNEL_DS	((mm_segment_t){0})
+# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
+
+#  ifndef CONFIG_MMU
+#  define KERNEL_DS	MAKE_MM_SEG(0)
 #  define USER_DS	KERNEL_DS
+#  else
+#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
+#  endif
 
 # define get_ds()	(KERNEL_DS)
 # define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(x) \
-		do { current_thread_info()->addr_limit = (x); } while (0)
+# define set_fs(val)	(current_thread_info()->addr_limit = (val))
 
-# define segment_eq(a, b)		((a).seg == (b).seg)
+# define segment_eq(a, b)	((a).seg == (b).seg)
 
 # endif /* __ASSEMBLY__ */
 #endif /* _ASM_MICROBLAZE_SEGMENT_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index 9b98e8e6aba..27f8dafd8c3 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -18,7 +19,6 @@
 extern unsigned int boot_cpuid; /* move to smp.h */
 
 extern char cmd_line[COMMAND_LINE_SIZE];
-#  endif/* __KERNEL__ */
 
 void early_printk(const char *fmt, ...);
 
@@ -30,6 +30,11 @@ void setup_heartbeat(void);
 
 unsigned long long sched_clock(void);
 
+#   ifdef CONFIG_MMU
+extern void mmu_reset(void);
+extern void early_console_reg_tlb_alloc(unsigned int addr);
+#   endif /* CONFIG_MMU */
+
 void time_init(void);
 void init_IRQ(void);
 void machine_early_init(const char *cmdline, unsigned int ram,
@@ -40,5 +45,6 @@ void machine_shutdown(void);
 void machine_halt(void);
 void machine_power_off(void);
 
+#  endif/* __KERNEL__ */
 # endif /* __ASSEMBLY__ */
 #endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 9676fad3486..46bc2267d94 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -90,7 +90,7 @@
 
 # ifndef __ASSEMBLY__
 # include <linux/types.h>
-# include <asm-generic/signal.h>
+# include <asm-generic/signal-defs.h>
 
 /* Avoid too many header ordering problems. */
 struct siginfo;
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index 5f18b8aed22..a15f77520bf 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -16,58 +16,53 @@
 
 #include <linux/posix_types.h>
 
+#define STAT_HAVE_NSEC 1
+
 struct stat {
-	unsigned int	st_dev;
+	unsigned long	st_dev;
 	unsigned long	st_ino;
 	unsigned int	st_mode;
 	unsigned int	st_nlink;
 	unsigned int	st_uid;
 	unsigned int	st_gid;
-	unsigned int	st_rdev;
-	unsigned long	st_size;
-	unsigned long	st_blksize;
-	unsigned long	st_blocks;
-	unsigned long	st_atime;
-	unsigned long	__unused1; /* unsigned long  st_atime_nsec */
-	unsigned long	st_mtime;
-	unsigned long	__unused2; /* unsigned long  st_mtime_nsec */
-	unsigned long	st_ctime;
-	unsigned long	__unused3; /* unsigned long  st_ctime_nsec */
+	unsigned long	st_rdev;
+	unsigned long	__pad1;
+	long		st_size;
+	int		st_blksize;
+	int		__pad2;
+	long		st_blocks;
+	int		st_atime;
+	unsigned int	st_atime_nsec;
+	int		st_mtime;
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;
+	unsigned int	st_ctime_nsec;
 	unsigned long	__unused4;
 	unsigned long	__unused5;
 };
 
 struct stat64 {
-	unsigned long long	st_dev;
-	unsigned long	__unused1;
-
-	unsigned long long	st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned long	__unused3;
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
-	unsigned long	__unused4; /* future possible st_blocks high bits */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long	__unused8;
+	unsigned long long	st_dev;		/* Device.  */
+	unsigned long long	st_ino;		/* File serial number.  */
+	unsigned int		st_mode;	/* File mode.  */
+	unsigned int		st_nlink;	/* Link count.  */
+	unsigned int		st_uid;		/* User ID of the file's owner.  */
+	unsigned int		st_gid;		/* Group ID of the file's group. */
+	unsigned long long	st_rdev;	/* Device number, if device.  */
+	unsigned long long	__pad1;
+	long long		st_size;	/* Size of file, in bytes.  */
+	int			st_blksize;	/* Optimal block size for I/O.  */
+	int			__pad2;
+	long long		st_blocks;	/* Number 512-byte blocks allocated. */
+	int			st_atime;	/* Time of last access.  */
+	unsigned int		st_atime_nsec;
+	int			st_mtime;	/* Time of last modification.  */
+	unsigned int		st_mtime_nsec;
+	int			st_ctime;	/* Time of last status change.  */
+	unsigned int		st_ctime_nsec;
+	unsigned int		__unused4;
+	unsigned int		__unused5;
 };
 
 #endif /* _ASM_MICROBLAZE_STAT_H */
+
diff --git a/arch/microblaze/include/asm/string.h b/arch/microblaze/include/asm/string.h
index f7728c90fc1..aec2f59298b 100644
--- a/arch/microblaze/include/asm/string.h
+++ b/arch/microblaze/include/asm/string.h
@@ -9,7 +9,7 @@
 #ifndef _ASM_MICROBLAZE_STRING_H
 #define _ASM_MICROBLAZE_STRING_H
 
-#ifndef __KERNEL__
+#ifdef __KERNEL__
 
 #define __HAVE_ARCH_MEMSET
 #define __HAVE_ARCH_MEMCPY
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index 9cb4ff0edeb..ddea9eb31f8 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -34,6 +34,9 @@ asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
 asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
 		struct old_sigaction *oact);
 
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+
 asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs);
 
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 102d7725866..47a46d1fbe2 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -81,7 +81,7 @@ struct termio {
 
 #ifdef __KERNEL__
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 4c3943e3f40..7fac4449844 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -122,6 +122,8 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SINGLESTEP		4
 #define TIF_IRET		5 /* return with iret */
 #define TIF_MEMDIE		6
+#define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
+#define TIF_SECCOMP		10      /* secure computing */
 #define TIF_FREEZE		14	/* Freezing for suspend */
 
 /* FIXME change in entry.S */
@@ -138,10 +140,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_IRET		(1<<TIF_IRET)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_KERNEL_TRACE	(1 << TIF_KERNEL_TRACE)
 
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK  (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		0x0000FFFE
+
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	0x0000FFFF
 
@@ -154,6 +163,17 @@ static inline struct thread_info *current_thread_info(void)
  */
 /* FPU was used by this task this quantum (SMP) */
 #define TS_USEDFPU		0x0001
+#define TS_RESTORE_SIGMASK	0x0002
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index d1dfe379112..c472d280113 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -13,4 +15,10 @@
 
 #include <asm-generic/tlb.h>
 
+#ifdef CONFIG_MMU
+#define tlb_start_vma(tlb, vma)		do { } while (0)
+#define tlb_end_vma(tlb, vma)		do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_TLB_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index d7fe7629001..eb31a0e8a77 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,50 @@
 #ifndef _ASM_MICROBLAZE_TLBFLUSH_H
 #define _ASM_MICROBLAZE_TLBFLUSH_H
 
+#ifdef CONFIG_MMU
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>	/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#define __tlbia()	_tlbia()
+
+static inline void local_flush_tlb_all(void)
+	{ __tlbia(); }
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void local_flush_tlb_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+	{ __tlbia(); }
+
+#define flush_tlb_kernel_range(start, end)	do { } while (0)
+
+#define update_mmu_cache(vma, addr, pte)	do { } while (0)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages.  We don't need to do anything here, there's nothing special
+ * about our page-table pages.  -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+	unsigned long start, unsigned long end) { }
+
+#else /* CONFIG_MMU */
+
 #define flush_tlb()				BUG()
 #define flush_tlb_all()				BUG()
 #define flush_tlb_mm(mm)			BUG()
@@ -17,4 +63,6 @@
 #define flush_tlb_pgtables(mm, start, end)	BUG()
 #define flush_tlb_kernel_range(start, end)	BUG()
 
+#endif /* CONFIG_MMU */
+
 #endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 5a3ffc308e1..65adad61e7e 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -26,6 +28,10 @@
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
+#define __clear_user(addr, n)	(memset((void *)(addr), 0, (n)), 0)
+
+#ifndef CONFIG_MMU
+
 extern int ___range_ok(unsigned long addr, unsigned long size);
 
 #define __range_ok(addr, size) \
@@ -34,68 +40,68 @@ extern int ___range_ok(unsigned long addr, unsigned long size);
 #define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 #define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
 
-extern inline int bad_user_access_length(void)
-{
-	return 0;
-}
+/* Undefined function to trigger linker error */
+extern int bad_user_access_length(void);
+
 /* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr)					\
-	({							\
-		int __gu_err = 0;				\
-		switch (sizeof(*(ptr))) {			\
-		case 1:						\
-		case 2:						\
-		case 4:						\
-			(var) = *(ptr);				\
-			break;					\
-		case 8:						\
-			memcpy((void *) &(var), (ptr), 8);	\
-			break;					\
-		default:					\
-			(var) = 0;				\
-			__gu_err = __get_user_bad();		\
-			break;					\
-		}						\
-		__gu_err;					\
-	})
+#define __get_user(var, ptr)				\
+({							\
+	int __gu_err = 0;				\
+	switch (sizeof(*(ptr))) {			\
+	case 1:						\
+	case 2:						\
+	case 4:						\
+		(var) = *(ptr);				\
+		break;					\
+	case 8:						\
+		memcpy((void *) &(var), (ptr), 8);	\
+		break;					\
+	default:					\
+		(var) = 0;				\
+		__gu_err = __get_user_bad();		\
+		break;					\
+	}						\
+	__gu_err;					\
+})
 
 #define __get_user_bad()	(bad_user_access_length(), (-EFAULT))
 
+/* FIXME is not there defined __pu_val */
 #define __put_user(var, ptr)					\
-	({							\
-		int __pu_err = 0;				\
-		switch (sizeof(*(ptr))) {			\
-		case 1:						\
-		case 2:						\
-		case 4:						\
-			*(ptr) = (var);				\
-			break;					\
-		case 8: {					\
-			typeof(*(ptr)) __pu_val = var;		\
-			memcpy(ptr, &__pu_val, sizeof(__pu_val));\
-			}					\
-			break;					\
-		default:					\
-			__pu_err = __put_user_bad();		\
-			break;					\
-		}							\
-		__pu_err;						\
-	})
+({								\
+	int __pu_err = 0;					\
+	switch (sizeof(*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+		*(ptr) = (var);					\
+		break;						\
+	case 8: {						\
+		typeof(*(ptr)) __pu_val = (var);		\
+		memcpy(ptr, &__pu_val, sizeof(__pu_val));	\
+		}						\
+		break;						\
+	default:						\
+		__pu_err = __put_user_bad();			\
+		break;						\
+	}							\
+	__pu_err;						\
+})
 
 #define __put_user_bad()	(bad_user_access_length(), (-EFAULT))
 
-#define put_user(x, ptr)	__put_user(x, ptr)
-#define get_user(x, ptr)	__get_user(x, ptr)
+#define put_user(x, ptr)	__put_user((x), (ptr))
+#define get_user(x, ptr)	__get_user((x), (ptr))
 
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)	(memcpy((to), (from), (n)), 0)
+#define copy_from_user(to, from, n)	(memcpy((to), (from), (n)), 0)
 
-#define __copy_to_user(to, from, n)		(copy_to_user(to, from, n))
-#define __copy_from_user(to, from, n)		(copy_from_user(to, from, n))
-#define __copy_to_user_inatomic(to, from, n)	(__copy_to_user(to, from, n))
-#define __copy_from_user_inatomic(to, from, n)	(__copy_from_user(to, from, n))
-
-#define __clear_user(addr, n)	(memset((void *)addr, 0, n), 0)
+#define __copy_to_user(to, from, n)	(copy_to_user((to), (from), (n)))
+#define __copy_from_user(to, from, n)	(copy_from_user((to), (from), (n)))
+#define __copy_to_user_inatomic(to, from, n) \
+			(__copy_to_user((to), (from), (n)))
+#define __copy_from_user_inatomic(to, from, n) \
+			(__copy_from_user((to), (from), (n)))
 
 static inline unsigned long clear_user(void *addr, unsigned long size)
 {
@@ -104,13 +110,200 @@ static inline unsigned long clear_user(void *addr, unsigned long size)
 	return size;
 }
 
-/* Returns 0 if exception not found and fixup otherwise. */
+/* Returns 0 if exception not found and fixup otherwise.  */
 extern unsigned long search_exception_table(unsigned long);
 
+extern long strncpy_from_user(char *dst, const char *src, long count);
+extern long strnlen_user(const char *src, long count);
+
+#else /* CONFIG_MMU */
+
+/*
+ * Address is valid if:
+ *  - "addr", "addr + size" and "size" are all below the limit
+ */
+#define access_ok(type, addr, size) \
+	(get_fs().seg > (((unsigned long)(addr)) | \
+		(size) | ((unsigned long)(addr) + (size))))
+
+/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
+ type?"WRITE":"READ",addr,size,get_fs().seg)) */
+
+/*
+ * All the __XXX versions macros/functions below do not perform
+ * access checking. It is assumed that the necessary checks have been
+ * already performed before the finction (macro) is called.
+ */
+
+#define get_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
+		? __get_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define put_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
+		? __put_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define __get_user(x, ptr)						\
+({									\
+	unsigned long __gu_val;						\
+	/*unsigned long __gu_ptr = (unsigned long)(ptr);*/		\
+	long __gu_err;							\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_asm("lbu", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2:								\
+		__get_user_asm("lhu", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	default:							\
+		__gu_val = 0; __gu_err = -EINVAL;			\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)		\
+({									\
+	__asm__ __volatile__ (						\
+			"1:"	insn	" %1, %2, r0;			\
+				addk	%0, r0, r0;			\
+			2:						\
+			.section .fixup,\"ax\";				\
+			3:	brid	2b;				\
+				addik	%0, r0, %3;			\
+			.previous;					\
+			.section __ex_table,\"a\";			\
+			.word	1b,3b;					\
+			.previous;"					\
+		: "=r"(__gu_err), "=r"(__gu_val)			\
+		: "r"(__gu_ptr), "i"(-EFAULT)				\
+	);								\
+})
+
+#define __put_user(x, ptr)						\
+({									\
+	__typeof__(*(ptr)) __gu_val = x;				\
+	long __gu_err = 0;						\
+	switch (sizeof(__gu_val)) {					\
+	case 1:								\
+		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2: 							\
+		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__put_user_asm("sw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 8:								\
+		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
+		break;							\
+	default:							\
+		__gu_err = -EINVAL;					\
+	}								\
+	__gu_err;							\
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)	\
+({							\
+__asm__ __volatile__ ("	lwi	%0, %1, 0;		\
+		1:	swi	%0, %2, 0;		\
+			lwi	%0, %1, 4;		\
+		2:	swi	%0, %2, 4;		\
+			addk	%0,r0,r0;		\
+		3:					\
+		.section .fixup,\"ax\";			\
+		4:	brid	3b;			\
+			addik	%0, r0, %3;		\
+		.previous;				\
+		.section __ex_table,\"a\";		\
+		.word	1b,4b,2b,4b;			\
+		.previous;"				\
+	: "=&r"(__gu_err)				\
+	: "r"(&__gu_val),				\
+	"r"(__gu_ptr), "i"(-EFAULT)			\
+	);						\
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;		\
+				addk	%0, r0, r0;		\
+			2:					\
+			.section .fixup,\"ax\";			\
+			3:	brid	2b;			\
+				addik	%0, r0, %3;		\
+			.previous;				\
+			.section __ex_table,\"a\";		\
+			.word	1b,3b;				\
+			.previous;"				\
+		: "=r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
+})
+
+/*
+ * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
+ */
+static inline int clear_user(char *to, int size)
+{
+	if (size && access_ok(VERIFY_WRITE, to, size)) {
+		__asm__ __volatile__ ("				\
+				1:				\
+					sb	r0, %2, r0;	\
+					addik	%0, %0, -1;	\
+					bneid	%0, 1b;		\
+					addik	%2, %2, 1;	\
+				2:				\
+				.section __ex_table,\"a\";	\
+				.word	1b,2b;			\
+				.section .text;"		\
+			: "=r"(size)				\
+			: "0"(size), "r"(to)
+		);
+	}
+	return size;
+}
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#define copy_to_user(to, from, n)					\
+	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
+		__copy_tofrom_user((void __user *)(to),			\
+			(__force const void __user *)(from), (n))	\
+		: -EFAULT)
+
+#define __copy_to_user(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
+
+#define copy_from_user(to, from, n)					\
+	(access_ok(VERIFY_READ, (from), (n)) ?				\
+		__copy_tofrom_user((__force void __user *)(to),		\
+			(void __user *)(from), (n))			\
+		: -EFAULT)
+
+#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+		copy_from_user((to), (from), (n))
+
+extern int __strncpy_user(char *to, const char __user *from, int len);
+extern int __strnlen_user(const char __user *sstr, int len);
+
+#define strncpy_from_user(to, from, len)	\
+		(access_ok(VERIFY_READ, from, 1) ?	\
+			__strncpy_user(to, from, len) : -EFAULT)
+#define strnlen_user(str, len)	\
+		(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
 
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
-extern long strnlen_user(const char __user *src, long count);
-extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+#endif /* CONFIG_MMU */
 
 /*
  * The exception table consists of pairs of addresses: the first is the
diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h
index 9d66b640c91..3658d91ac0f 100644
--- a/arch/microblaze/include/asm/unaligned.h
+++ b/arch/microblaze/include/asm/unaligned.h
@@ -12,7 +12,8 @@
 
 # ifdef __KERNEL__
 
-# include <linux/unaligned/access_ok.h>
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
 # include <linux/unaligned/generic.h>
 
 # define get_unaligned	__get_unaligned_be
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index da94bec4ecb..f4a5e19a20e 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_SELFMOD)		+= selfmod.o
 obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
+obj-$(CONFIG_MMU)		+= misc.o
 
 obj-y	+= entry$(MMUEXT).o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index aabd9e9423a..7bc7b68f97d 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
@@ -68,16 +69,26 @@ int main(int argc, char *argv[])
 
 	/* struct task_struct */
 	DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+#ifdef CONFIG_MMU
+	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	BLANK();
+
+	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+	BLANK();
+#endif
 
 	/* struct thread_info */
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
-	DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
 	BLANK();
 
diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
index 4b0f0fdb9ca..7de84923ba0 100644
--- a/arch/microblaze/kernel/early_printk.c
+++ b/arch/microblaze/kernel/early_printk.c
@@ -87,6 +87,9 @@ int __init setup_early_printk(char *opt)
 	base_addr = early_uartlite_console();
 	if (base_addr) {
 		early_console_initialized = 1;
+#ifdef CONFIG_MMU
+		early_console_reg_tlb_alloc(base_addr);
+#endif
 		early_printk("early_printk_console is enabled at 0x%08x\n",
 							base_addr);
 
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index f24b1268baa..1fce6b803f5 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -10,7 +10,7 @@
 
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
 #include <asm/registers.h>
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
new file mode 100644
index 00000000000..91a0e7b185d
--- /dev/null
+++ b/arch/microblaze/kernel/entry.S
@@ -0,0 +1,1116 @@
+/*
+ * Low-level system-call handling, trap handlers and context-switching
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003		John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001,2002	NEC Corporation
+ * Copyright (C) 2001,2002	Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Heavily modified by John Williams for Microblaze
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/exceptions.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/unistd.h>
+
+#include <linux/errno.h>
+#include <asm/signal.h>
+
+/* The size of a state save frame. */
+#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+/* The offset of the struct pt_regs in a `state save frame' on the stack. */
+#define PTO	STATE_SAVE_ARG_SPACE /* 24 the space for args */
+
+#define C_ENTRY(name)	.globl name; .align 4; name
+
+/*
+ * Various ways of setting and clearing BIP in flags reg.
+ * This is mucky, but necessary using microblaze version that
+ * allows msr ops to write to BIP
+ */
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+	.macro	clear_bip
+	msrclr	r11, MSR_BIP
+	nop
+	.endm
+
+	.macro	set_bip
+	msrset	r11, MSR_BIP
+	nop
+	.endm
+
+	.macro	clear_eip
+	msrclr	r11, MSR_EIP
+	nop
+	.endm
+
+	.macro	set_ee
+	msrset	r11, MSR_EE
+	nop
+	.endm
+
+	.macro	disable_irq
+	msrclr	r11, MSR_IE
+	nop
+	.endm
+
+	.macro	enable_irq
+	msrset	r11, MSR_IE
+	nop
+	.endm
+
+	.macro	set_ums
+	msrset	r11, MSR_UMS
+	nop
+	msrclr	r11, MSR_VMS
+	nop
+	.endm
+
+	.macro	set_vms
+	msrclr	r11, MSR_UMS
+	nop
+	msrset	r11, MSR_VMS
+	nop
+	.endm
+
+	.macro	clear_vms_ums
+	msrclr	r11, MSR_VMS
+	nop
+	msrclr	r11, MSR_UMS
+	nop
+	.endm
+#else
+	.macro	clear_bip
+	mfs	r11, rmsr
+	nop
+	andi	r11, r11, ~MSR_BIP
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	set_bip
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_BIP
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	clear_eip
+	mfs	r11, rmsr
+	nop
+	andi	r11, r11, ~MSR_EIP
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	set_ee
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_EE
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	disable_irq
+	mfs	r11, rmsr
+	nop
+	andi	r11, r11, ~MSR_IE
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	enable_irq
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_IE
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro set_ums
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_VMS
+	andni	r11, r11, MSR_UMS
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	set_vms
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_VMS
+	andni	r11, r11, MSR_UMS
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	clear_vms_ums
+	mfs	r11, rmsr
+	nop
+	andni	r11, r11, (MSR_VMS|MSR_UMS)
+	mts	rmsr,r11
+	nop
+	.endm
+#endif
+
+/* Define how to call high-level functions. With MMU, virtual mode must be
+ * enabled when calling the high-level function. Clobbers R11.
+ * VM_ON, VM_OFF, DO_JUMP_BIPCLR, DO_CALL
+ */
+
+/* turn on virtual protected mode save */
+#define VM_ON		\
+	set_ums;		\
+	rted	r0, 2f;	\
+2: nop;
+
+/* turn off virtual protected mode save and user mode save*/
+#define VM_OFF			\
+	clear_vms_ums;			\
+	rted	r0, TOPHYS(1f);	\
+1: nop;
+
+#define SAVE_REGS \
+	swi	r2, r1, PTO+PT_R2;	/* Save SDA */			\
+	swi	r5, r1, PTO+PT_R5;					\
+	swi	r6, r1, PTO+PT_R6;					\
+	swi	r7, r1, PTO+PT_R7;					\
+	swi	r8, r1, PTO+PT_R8;					\
+	swi	r9, r1, PTO+PT_R9;					\
+	swi	r10, r1, PTO+PT_R10;					\
+	swi	r11, r1, PTO+PT_R11;	/* save clobbered regs after rval */\
+	swi	r12, r1, PTO+PT_R12;					\
+	swi	r13, r1, PTO+PT_R13;	/* Save SDA2 */			\
+	swi	r14, r1, PTO+PT_PC;	/* PC, before IRQ/trap */	\
+	swi	r15, r1, PTO+PT_R15;	/* Save LP */			\
+	swi	r18, r1, PTO+PT_R18;	/* Save asm scratch reg */	\
+	swi	r19, r1, PTO+PT_R19;					\
+	swi	r20, r1, PTO+PT_R20;					\
+	swi	r21, r1, PTO+PT_R21;					\
+	swi	r22, r1, PTO+PT_R22;					\
+	swi	r23, r1, PTO+PT_R23;					\
+	swi	r24, r1, PTO+PT_R24;					\
+	swi	r25, r1, PTO+PT_R25;					\
+	swi	r26, r1, PTO+PT_R26;					\
+	swi	r27, r1, PTO+PT_R27;					\
+	swi	r28, r1, PTO+PT_R28;					\
+	swi	r29, r1, PTO+PT_R29;					\
+	swi	r30, r1, PTO+PT_R30;					\
+	swi	r31, r1, PTO+PT_R31;	/* Save current task reg */	\
+	mfs	r11, rmsr;		/* save MSR */			\
+	nop;								\
+	swi	r11, r1, PTO+PT_MSR;
+
+#define RESTORE_REGS \
+	lwi	r11, r1, PTO+PT_MSR;					\
+	mts	rmsr , r11;						\
+	nop;								\
+	lwi	r2, r1, PTO+PT_R2;	/* restore SDA */		\
+	lwi	r5, r1, PTO+PT_R5;					\
+	lwi	r6, r1, PTO+PT_R6;					\
+	lwi	r7, r1, PTO+PT_R7;					\
+	lwi	r8, r1, PTO+PT_R8;					\
+	lwi	r9, r1, PTO+PT_R9;					\
+	lwi	r10, r1, PTO+PT_R10;					\
+	lwi	r11, r1, PTO+PT_R11;	/* restore clobbered regs after rval */\
+	lwi	r12, r1, PTO+PT_R12;					\
+	lwi	r13, r1, PTO+PT_R13;	/* restore SDA2 */		\
+	lwi	r14, r1, PTO+PT_PC;	/* RESTORE_LINK PC, before IRQ/trap */\
+	lwi	r15, r1, PTO+PT_R15;	/* restore LP */		\
+	lwi	r18, r1, PTO+PT_R18;	/* restore asm scratch reg */	\
+	lwi	r19, r1, PTO+PT_R19;					\
+	lwi	r20, r1, PTO+PT_R20;					\
+	lwi	r21, r1, PTO+PT_R21;					\
+	lwi	r22, r1, PTO+PT_R22;					\
+	lwi	r23, r1, PTO+PT_R23;					\
+	lwi	r24, r1, PTO+PT_R24;					\
+	lwi	r25, r1, PTO+PT_R25;					\
+	lwi	r26, r1, PTO+PT_R26;					\
+	lwi	r27, r1, PTO+PT_R27;					\
+	lwi	r28, r1, PTO+PT_R28;					\
+	lwi	r29, r1, PTO+PT_R29;					\
+	lwi	r30, r1, PTO+PT_R30;					\
+	lwi	r31, r1, PTO+PT_R31;	/* Restore cur task reg */
+
+.text
+
+/*
+ * User trap.
+ *
+ * System calls are handled here.
+ *
+ * Syscall protocol:
+ * Syscall number in r12, args in r5-r10
+ * Return value in r3
+ *
+ * Trap entered via brki instruction, so BIP bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ */
+C_ENTRY(_user_exception):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	addi	r14, r14, 4	/* return address is 4 byte after call */
+	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11);	/* Save r11 */
+
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
+	beqi	r11, 1f;		/* Jump ahead if coming from user */
+/* Kernel-mode state save. */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+	tophys(r1,r11);
+	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+	SAVE_REGS
+
+	addi	r11, r0, 1; 		/* Was in kernel-mode. */
+	swi	r11, r1, PTO+PT_MODE; /* pt_regs -> kernel mode */
+	brid	2f;
+	nop;				/* Fill delay slot */
+
+/* User-mode state save.  */
+1:
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11);	/* restore r11 */
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+	tophys(r1,r1);
+	lwi	r1, r1, TS_THREAD_INFO;	/* get stack from task_struct */
+/* calculate kernel stack pointer from task struct 8k */
+	addik	r1, r1, THREAD_SIZE;
+	tophys(r1,r1);
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	SAVE_REGS
+
+	swi	r0, r1, PTO+PT_MODE;			/* Was in user-mode. */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	swi	r11, r1, PTO+PT_R1;		/* Store user SP.  */
+	addi	r11, r0, 1;
+	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
+2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	/* get saved current */
+	/* Save away the syscall number.  */
+	swi	r12, r1, PTO+PT_R0;
+	tovirt(r1,r1)
+
+	la	r15, r0, ret_from_trap-8
+/* where the trap should return need -8 to adjust for rtsd r15, 8*/
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid. The LP
+ * register should point to the location where
+ * the called function should return.  [note that MAKE_SYS_CALL uses label 1] */
+	/* See if the system call number is valid.  */
+	addi	r11, r12, -__NR_syscalls;
+	bgei	r11,1f;
+	/* Figure out which function to use for this system call.  */
+	/* Note Microblaze barrel shift is optional, so don't rely on it */
+	add	r12, r12, r12;			/* convert num -> ptr */
+	add	r12, r12, r12;
+
+	/* Trac syscalls and stored them to r0_ram */
+	lwi	r3, r12, 0x400 + TOPHYS(r0_ram)
+	addi	r3, r3, 1
+	swi	r3, r12, 0x400 + TOPHYS(r0_ram)
+
+	lwi	r12, r12, TOPHYS(sys_call_table); /* Function ptr */
+	/* Make the system call.  to r12*/
+	set_vms;
+	rtid	r12, 0;
+	nop;
+	/* The syscall number is invalid, return an error.  */
+1:	VM_ON;	/* RETURN() expects virtual mode*/
+	addi	r3, r0, -ENOSYS;
+	rtsd	r15,8;		/* looks like a normal subroutine return */
+	or 	r0, r0, r0
+
+
+/* Entry point used to return from a syscall/trap.  */
+/* We re-enable BIP bit before state restore */
+C_ENTRY(ret_from_trap):
+	set_bip;			/*  Ints masked for state restore*/
+	lwi	r11, r1, PTO+PT_MODE;
+/* See if returning to kernel mode, if so, skip resched &c.  */
+	bnei	r11, 2f;
+
+	/* We're returning to user mode, so check for various conditions that
+	 * trigger rescheduling. */
+	/* Get current task ptr into r11 */
+	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f;
+
+	swi	r3, r1, PTO + PT_R3; /* store syscall result */
+	swi	r4, r1, PTO + PT_R4;
+	bralid	r15, schedule;	/* Call scheduler */
+	nop;				/* delay slot */
+	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
+	lwi	r4, r1, PTO + PT_R4;
+
+	/* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqi	r11, 1f;		/* Signals to handle, handle them */
+
+	swi	r3, r1, PTO + PT_R3; /* store syscall result */
+	swi	r4, r1, PTO + PT_R4;
+	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+	addi	r7, r0, 1;		/* Arg 3: int in_syscall */
+	bralid	r15, do_signal;	/* Handle any signals */
+	nop;
+	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
+	lwi	r4, r1, PTO + PT_R4;
+
+/* Finally, return to user state.  */
+1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
+	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	VM_OFF;
+	tophys(r1,r1);
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+	lwi	r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
+	bri	6f;
+
+/* Return to kernel state.  */
+2:	VM_OFF;
+	tophys(r1,r1);
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+	tovirt(r1,r1);
+6:
+TRAP_return:		/* Make global symbol for debugging */
+	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+	nop;
+
+
+/* These syscalls need access to the struct pt_regs on the stack, so we
+   implement them in assembly (they're basically all wrappers anyway).  */
+
+C_ENTRY(sys_fork_wrapper):
+	addi	r5, r0, SIGCHLD			/* Arg 0: flags */
+	lwi	r6, r1, PTO+PT_R1	/* Arg 1: child SP (use parent's) */
+	la	r7, r1, PTO			/* Arg 2: parent context */
+	add	r8. r0, r0			/* Arg 3: (unused) */
+	add	r9, r0, r0;			/* Arg 4: (unused) */
+	add	r10, r0, r0;			/* Arg 5: (unused) */
+	brid	do_fork		/* Do real work (tail-call) */
+	nop;
+
+/* This the initial entry point for a new child thread, with an appropriate
+   stack in place that makes it look the the child is in the middle of an
+   syscall.  This function is actually `returned to' from switch_thread
+   (copy_thread makes ret_from_fork the return address in each new thread's
+   saved context).  */
+C_ENTRY(ret_from_fork):
+	bralid	r15, schedule_tail; /* ...which is schedule_tail's arg */
+	add	r3, r5, r0;	/* switch_thread returns the prev task */
+				/* ( in the delay slot ) */
+	add	r3, r0, r0;	/* Child's fork call should return 0. */
+	brid	ret_from_trap;	/* Do normal trap return */
+	nop;
+
+C_ENTRY(sys_vfork_wrapper):
+	la	r5, r1, PTO
+	brid	sys_vfork	/* Do real work (tail-call) */
+	nop
+
+C_ENTRY(sys_clone_wrapper):
+	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
+	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
+1:	la	r7, r1, PTO;			/* Arg 2: parent context */
+	add	r8, r0, r0;			/* Arg 3: (unused) */
+	add	r9, r0, r0;			/* Arg 4: (unused) */
+	add	r10, r0, r0;			/* Arg 5: (unused) */
+	brid	do_fork		/* Do real work (tail-call) */
+	nop;
+
+C_ENTRY(sys_execve_wrapper):
+	la	r8, r1, PTO;		/* add user context as 4th arg */
+	brid	sys_execve;	/* Do real work (tail-call).*/
+	nop;
+
+C_ENTRY(sys_sigsuspend_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r6, r1, PTO;		/* add user context as 2nd arg */
+	bralid	r15, sys_sigsuspend; /* Do real work.*/
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+C_ENTRY(sys_rt_sigsuspend_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r7, r1, PTO;		/* add user context as 3rd arg */
+	brlid	r15, sys_rt_sigsuspend;	/* Do real work.*/
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+
+C_ENTRY(sys_sigreturn_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r5, r1, PTO;		/* add user context as 1st arg */
+	brlid	r15, sys_sigreturn;	/* Do real work.*/
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+C_ENTRY(sys_rt_sigreturn_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r5, r1, PTO;		/* add user context as 1st arg */
+	brlid	r15, sys_rt_sigreturn	/* Do real work */
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+/*
+ * HW EXCEPTION rutine start
+ */
+
+#define SAVE_STATE	\
+	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */	\
+	set_bip;	/*equalize initial state for all possible entries*/\
+	clear_eip;							\
+	enable_irq;							\
+	set_ee;								\
+	/* See if already in kernel mode.*/				\
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));				\
+	beqi	r11, 1f;		/* Jump ahead if coming from user */\
+	/* Kernel-mode state save.  */					\
+	/* Reload kernel stack-ptr. */					\
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
+	tophys(r1,r11);							\
+	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */	\
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */\
+	/* store return registers separately because			\
+	 * this macros is use for others exceptions */			\
+	swi	r3, r1, PTO + PT_R3;					\
+	swi	r4, r1, PTO + PT_R4;					\
+	SAVE_REGS							\
+	/* PC, before IRQ/trap - this is one instruction above */	\
+	swi	r17, r1, PTO+PT_PC;					\
+									\
+	addi	r11, r0, 1; 		/* Was in kernel-mode.  */	\
+	swi	r11, r1, PTO+PT_MODE; 	 				\
+	brid	2f;							\
+	nop;				/* Fill delay slot */		\
+1:	/* User-mode state save.  */					\
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+	tophys(r1,r1);							\
+	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */	\
+	addik	r1, r1, THREAD_SIZE;	/* calculate kernel stack pointer */\
+	tophys(r1,r1);							\
+									\
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */\
+	/* store return registers separately because this macros	\
+	 * is use for others exceptions */				\
+	swi	r3, r1, PTO + PT_R3; 					\
+	swi	r4, r1, PTO + PT_R4;					\
+	SAVE_REGS							\
+	/* PC, before IRQ/trap - this is one instruction above FIXME*/	\
+	swi	r17, r1, PTO+PT_PC;					\
+									\
+	swi	r0, r1, PTO+PT_MODE; /* Was in user-mode.  */		\
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
+	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
+	addi	r11, r0, 1;						\
+	swi	r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
+2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+	/* Save away the syscall number.  */				\
+	swi	r0, r1, PTO+PT_R0;					\
+	tovirt(r1,r1)
+
+C_ENTRY(full_exception_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	/* adjust exception address for privileged instruction
+	 * for finding where is it */
+	addik	r17, r17, -4
+	SAVE_STATE /* Save registers */
+	/* FIXME this can be store directly in PT_ESR reg.
+	 * I tested it but there is a fault */
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc - 8
+	la	r5, r1, PTO		 /* parameter struct pt_regs * regs */
+	mfs	r6, resr
+	nop
+	mfs	r7, rfsr;		/* save FSR */
+	nop
+	la	r12, r0, full_exception
+	set_vms;
+	rtbd	r12, 0;
+	nop;
+
+/*
+ * Unaligned data trap.
+ *
+ * Unaligned data trap last on 4k page is handled here.
+ *
+ * Trap entered via exception, so EE bit is set, and interrupts
+ * are masked.  This is nice, means we don't have to CLI before state save
+ *
+ * The assembler routine is in "arch/microblaze/kernel/hw_exception_handler.S"
+ */
+C_ENTRY(unaligned_data_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	SAVE_STATE		/* Save registers.*/
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc-8
+	mfs	r3, resr		/* ESR */
+	nop
+	mfs	r4, rear		/* EAR */
+	nop
+	la	r7, r1, PTO		/* parameter struct pt_regs * regs */
+	la	r12, r0, _unaligned_data_exception
+	set_vms;
+	rtbd	r12, 0;	/* interrupts enabled */
+	nop;
+
+/*
+ * Page fault traps.
+ *
+ * If the real exception handler (from hw_exception_handler.S) didn't find
+ * the mapping for the process, then we're thrown here to handle such situation.
+ *
+ * Trap entered via exceptions, so EE bit is set, and interrupts
+ * are masked.  This is nice, means we don't have to CLI before state save
+ *
+ * Build a standard exception frame for TLB Access errors.  All TLB exceptions
+ * will bail out to this point if they can't resolve the lightweight TLB fault.
+ *
+ * The C function called is in "arch/microblaze/mm/fault.c", declared as:
+ * void do_page_fault(struct pt_regs *regs,
+ *				unsigned long address,
+ *				unsigned long error_code)
+ */
+/* data and intruction trap - which is choose is resolved int fault.c */
+C_ENTRY(page_fault_data_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	SAVE_STATE		/* Save registers.*/
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc-8
+	la	r5, r1, PTO		/* parameter struct pt_regs * regs */
+	mfs	r6, rear		/* parameter unsigned long address */
+	nop
+	mfs	r7, resr		/* parameter unsigned long error_code */
+	nop
+	la	r12, r0, do_page_fault
+	set_vms;
+	rtbd	r12, 0;	/* interrupts enabled */
+	nop;
+
+C_ENTRY(page_fault_instr_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	SAVE_STATE		/* Save registers.*/
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc-8
+	la	r5, r1, PTO		/* parameter struct pt_regs * regs */
+	mfs	r6, rear		/* parameter unsigned long address */
+	nop
+	ori	r7, r0, 0		/* parameter unsigned long error_code */
+	la	r12, r0, do_page_fault
+	set_vms;
+	rtbd	r12, 0;	/* interrupts enabled */
+	nop;
+
+/* Entry point used to return from an exception.  */
+C_ENTRY(ret_from_exc):
+	set_bip;			/*  Ints masked for state restore*/
+	lwi	r11, r1, PTO+PT_MODE;
+	bnei	r11, 2f;		/* See if returning to kernel mode, */
+					/* ... if so, skip resched &c.  */
+
+	/* We're returning to user mode, so check for various conditions that
+	   trigger rescheduling. */
+	/* Get current task ptr into r11 */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+	bralid	r15, schedule;	/* Call scheduler */
+	nop;				/* delay slot */
+
+	/* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqi	r11, 1f;		/* Signals to handle, handle them */
+
+	/*
+	 * Handle a signal return; Pending signals should be in r18.
+	 *
+	 * Not all registers are saved by the normal trap/interrupt entry
+	 * points (for instance, call-saved registers (because the normal
+	 * C-compiler calling sequence in the kernel makes sure they're
+	 * preserved), and call-clobbered registers in the case of
+	 * traps), but signal handlers may want to examine or change the
+	 * complete register state.  Here we save anything not saved by
+	 * the normal entry sequence, so that it may be safely restored
+	 * (in a possibly modified form) after do_signal returns.
+	 * store return registers separately because this macros is use
+	 * for others exceptions */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
+	bralid	r15, do_signal;	/* Handle any signals */
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+
+/* Finally, return to user state.  */
+1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	VM_OFF;
+	tophys(r1,r1);
+
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+	lwi	r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */
+	bri	6f;
+/* Return to kernel state.  */
+2:	VM_OFF;
+	tophys(r1,r1);
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+	tovirt(r1,r1);
+6:
+EXC_return:		/* Make global symbol for debugging */
+	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+	nop;
+
+/*
+ * HW EXCEPTION rutine end
+ */
+
+/*
+ * Hardware maskable interrupts.
+ *
+ * The stack-pointer (r1) should have already been saved to the memory
+ * location PER_CPU(ENTRY_SP).
+ */
+C_ENTRY(_interrupt):
+/* MS: we are in physical address */
+/* Save registers, switch to proper stack, convert SP to virtual.*/
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+	swi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+	/* MS: See if already in kernel mode. */
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));
+	beqi	r11, 1f; /* MS: Jump ahead if coming from user */
+
+/* Kernel-mode state save. */
+	or	r11, r1, r0
+	tophys(r1,r11); /* MS: I have in r1 physical address where stack is */
+/* MS: Save original SP - position PT_R1 to next stack frame 4 *1 - 152*/
+	swi	r11, r1, (PT_R1 - PT_SIZE);
+/* MS: restore r11 because of saving in SAVE_REGS */
+	lwi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+	/* save registers */
+/* MS: Make room on the stack -> activation record */
+	addik	r1, r1, -STATE_SAVE_SIZE;
+/* MS: store return registers separately because
+ * this macros is use for others exceptions */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	SAVE_REGS
+	/* MS: store mode */
+	addi	r11, r0, 1; /* MS: Was in kernel-mode. */
+	swi	r11, r1, PTO + PT_MODE; /* MS: and save it */
+	brid	2f;
+	nop; /* MS: Fill delay slot */
+
+1:
+/* User-mode state save. */
+/* MS: restore r11 -> FIXME move before SAVE_REG */
+	lwi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+ /* MS: get the saved current */
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	tophys(r1,r1);
+	lwi	r1, r1, TS_THREAD_INFO;
+	addik	r1, r1, THREAD_SIZE;
+	tophys(r1,r1);
+	/* save registers */
+	addik	r1, r1, -STATE_SAVE_SIZE;
+	swi	r3, r1, PTO+PT_R3;
+	swi	r4, r1, PTO+PT_R4;
+	SAVE_REGS
+	/* calculate mode */
+	swi	r0, r1, PTO + PT_MODE;
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	swi	r11, r1, PTO+PT_R1;
+	/* setup kernel mode to KM */
+	addi	r11, r0, 1;
+	swi	r11, r0, TOPHYS(PER_CPU(KM));
+
+2:
+	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	swi	r0, r1, PTO + PT_R0;
+	tovirt(r1,r1)
+	la	r5, r1, PTO;
+	set_vms;
+	la	r11, r0, do_IRQ;
+	la	r15, r0, irq_call;
+irq_call:rtbd	r11, 0;
+	nop;
+
+/* MS: we are in virtual mode */
+ret_from_irq:
+	lwi	r11, r1, PTO + PT_MODE;
+	bnei	r11, 2f;
+
+	add	r11, r0, CURRENT_TASK;
+	lwi	r11, r11, TS_THREAD_INFO;
+	lwi	r11, r11, TI_FLAGS; /* MS: get flags from thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f
+	bralid	r15, schedule;
+	nop; /* delay slot */
+
+    /* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK;
+	lwi	r11, r11, TS_THREAD_INFO; /* MS: get thread info */
+	lwi	r11, r11, TI_FLAGS; /* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqid	r11, no_intr_resched
+/* Handle a signal return; Pending signals should be in r18. */
+	addi	r7, r0, 0; /* Arg 3: int in_syscall */
+	la	r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+	bralid	r15, do_signal;	/* Handle any signals */
+	add	r6, r0, r0; /* Arg 2: sigset_t *oldset */
+
+/* Finally, return to user state. */
+no_intr_resched:
+    /* Disable interrupts, we are now committed to the state restore */
+	disable_irq
+	swi	r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
+	add	r11, r0, CURRENT_TASK;
+	swi	r11, r0, PER_CPU(CURRENT_SAVE);
+	VM_OFF;
+	tophys(r1,r1);
+	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
+	lwi	r4, r1, PTO + PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
+	lwi	r1, r1, PT_R1 - PT_SIZE;
+	bri	6f;
+/* MS: Return to kernel state. */
+2:	VM_OFF /* MS: turn off MMU */
+	tophys(r1,r1)
+	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
+	lwi	r4, r1, PTO + PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE	/* MS: Clean up stack space. */
+	tovirt(r1,r1);
+6:
+IRQ_return: /* MS: Make global symbol for debugging */
+	rtid	r14, 0
+	nop
+
+/*
+ * `Debug' trap
+ *  We enter dbtrap in "BIP" (breakpoint) mode.
+ *  So we exit the breakpoint mode with an 'rtbd' and proceed with the
+ *  original dbtrap.
+ *  however, wait to save state first
+ */
+C_ENTRY(_debug_exception):
+	/* BIP bit is set on entry, no interrupts can occur */
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+
+	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */
+	set_bip;	/*equalize initial state for all possible entries*/
+	clear_eip;
+	enable_irq;
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
+	beqi	r11, 1f;		/* Jump ahead if coming from user */
+	/* Kernel-mode state save.  */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+	tophys(r1,r11);
+	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	SAVE_REGS;
+
+	addi	r11, r0, 1; 		/* Was in kernel-mode.  */
+	swi	r11, r1, PTO + PT_MODE;
+	brid	2f;
+	nop;				/* Fill delay slot */
+1:      /* User-mode state save.  */
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+	tophys(r1,r1);
+	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */
+	addik	r1, r1, THREAD_SIZE;	/* calculate kernel stack pointer */
+	tophys(r1,r1);
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	SAVE_REGS;
+
+	swi	r0, r1, PTO+PT_MODE; /* Was in user-mode.  */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */
+	addi	r11, r0, 1;
+	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
+2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+	/* Save away the syscall number.  */
+	swi	r0, r1, PTO+PT_R0;
+	tovirt(r1,r1)
+
+	addi	r5, r0, SIGTRAP		     /* send the trap signal */
+	add	r6, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	addk	r7, r0, r0		     /* 3rd param zero */
+
+	set_vms;
+	la	r11, r0, send_sig;
+	la	r15, r0, dbtrap_call;
+dbtrap_call:	rtbd	r11, 0;
+	nop;
+
+	set_bip;			/*  Ints masked for state restore*/
+	lwi	r11, r1, PTO+PT_MODE;
+	bnei	r11, 2f;
+
+	/* Get current task ptr into r11 */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+
+	bralid	r15, schedule;	/* Call scheduler */
+	nop;				/* delay slot */
+	/* XXX Is PT_DTRACE handling needed here? */
+	/* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here.  */
+
+	/* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqi	r11, 1f;		/* Signals to handle, handle them */
+
+/* Handle a signal return; Pending signals should be in r18.  */
+	/* Not all registers are saved by the normal trap/interrupt entry
+	   points (for instance, call-saved registers (because the normal
+	   C-compiler calling sequence in the kernel makes sure they're
+	   preserved), and call-clobbered registers in the case of
+	   traps), but signal handlers may want to examine or change the
+	   complete register state.  Here we save anything not saved by
+	   the normal entry sequence, so that it may be safely restored
+	   (in a possibly modified form) after do_signal returns.  */
+
+	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+	addi  r7, r0, 0;	/* Arg 3: int in_syscall */
+	bralid	r15, do_signal;	/* Handle any signals */
+	nop;
+
+
+/* Finally, return to user state.  */
+1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	VM_OFF;
+	tophys(r1,r1);
+
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+
+	lwi	r1, r1, PT_R1 - PT_SIZE;
+					/* Restore user stack pointer. */
+	bri	6f;
+
+/* Return to kernel state.  */
+2:	VM_OFF;
+	tophys(r1,r1);
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+	tovirt(r1,r1);
+6:
+DBTRAP_return:		/* Make global symbol for debugging */
+	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+	nop;
+
+
+
+ENTRY(_switch_to)
+	/* prepare return value */
+	addk	r3, r0, r31
+
+	/* save registers in cpu_context */
+	/* use r11 and r12, volatile registers, as temp register */
+	/* give start of cpu_context for previous process */
+	addik	r11, r5, TI_CPU_CONTEXT
+	swi	r1, r11, CC_R1
+	swi	r2, r11, CC_R2
+	/* skip volatile registers.
+	 * they are saved on stack when we jumped to _switch_to() */
+	/* dedicated registers */
+	swi	r13, r11, CC_R13
+	swi	r14, r11, CC_R14
+	swi	r15, r11, CC_R15
+	swi	r16, r11, CC_R16
+	swi	r17, r11, CC_R17
+	swi	r18, r11, CC_R18
+	/* save non-volatile registers */
+	swi	r19, r11, CC_R19
+	swi	r20, r11, CC_R20
+	swi	r21, r11, CC_R21
+	swi	r22, r11, CC_R22
+	swi	r23, r11, CC_R23
+	swi	r24, r11, CC_R24
+	swi	r25, r11, CC_R25
+	swi	r26, r11, CC_R26
+	swi	r27, r11, CC_R27
+	swi	r28, r11, CC_R28
+	swi	r29, r11, CC_R29
+	swi	r30, r11, CC_R30
+	/* special purpose registers */
+	mfs	r12, rmsr
+	nop
+	swi	r12, r11, CC_MSR
+	mfs	r12, rear
+	nop
+	swi	r12, r11, CC_EAR
+	mfs	r12, resr
+	nop
+	swi	r12, r11, CC_ESR
+	mfs	r12, rfsr
+	nop
+	swi	r12, r11, CC_FSR
+
+	/* update r31, the current */
+	lwi	r31, r6, TI_TASK/* give me pointer to task which will be next */
+	/* stored it to current_save too */
+	swi	r31, r0, PER_CPU(CURRENT_SAVE)
+
+	/* get new process' cpu context and restore */
+	/* give me start where start context of next task */
+	addik	r11, r6, TI_CPU_CONTEXT
+
+	/* non-volatile registers */
+	lwi	r30, r11, CC_R30
+	lwi	r29, r11, CC_R29
+	lwi	r28, r11, CC_R28
+	lwi	r27, r11, CC_R27
+	lwi	r26, r11, CC_R26
+	lwi	r25, r11, CC_R25
+	lwi	r24, r11, CC_R24
+	lwi	r23, r11, CC_R23
+	lwi	r22, r11, CC_R22
+	lwi	r21, r11, CC_R21
+	lwi	r20, r11, CC_R20
+	lwi	r19, r11, CC_R19
+	/* dedicated registers */
+	lwi	r18, r11, CC_R18
+	lwi	r17, r11, CC_R17
+	lwi	r16, r11, CC_R16
+	lwi	r15, r11, CC_R15
+	lwi	r14, r11, CC_R14
+	lwi	r13, r11, CC_R13
+	/* skip volatile registers */
+	lwi	r2, r11, CC_R2
+	lwi	r1, r11, CC_R1
+
+	/* special purpose registers */
+	lwi	r12, r11, CC_FSR
+	mts	rfsr, r12
+	nop
+	lwi	r12, r11, CC_MSR
+	mts	rmsr, r12
+	nop
+
+	rtsd	r15, 8
+	nop
+
+ENTRY(_reset)
+	brai	0x70; /* Jump back to FS-boot */
+
+ENTRY(_break)
+	mfs	r5, rmsr
+	nop
+	swi	r5, r0, 0x250 + TOPHYS(r0_ram)
+	mfs	r5, resr
+	nop
+	swi	r5, r0, 0x254 + TOPHYS(r0_ram)
+	bri	0
+
+	/* These are compiled and loaded into high memory, then
+	 * copied into place in mach_early_setup */
+	.section	.init.ivt, "ax"
+	.org	0x0
+	/* this is very important - here is the reset vector */
+	/* in current MMU branch you don't care what is here - it is
+	 * used from bootloader site - but this is correct for FS-BOOT */
+	brai	0x70
+	nop
+	brai	TOPHYS(_user_exception); /* syscall handler */
+	brai	TOPHYS(_interrupt);	/* Interrupt handler */
+	brai	TOPHYS(_break);		/* nmi trap handler */
+	brai	TOPHYS(_hw_exception_handler);	/* HW exception handler */
+
+	.org	0x60
+	brai	TOPHYS(_debug_exception);	/* debug trap handler*/
+
+.section .rodata,"a"
+#include "syscall_table.S"
+
+syscall_table_size=(.-sys_call_table)
+
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 4a8a4064c7e..0cb64a31e89 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -21,9 +21,9 @@
 
 #include <asm/exceptions.h>
 #include <asm/entry.h>		/* For KM CPU var */
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
 #include <asm/current.h>
 
 #define MICROBLAZE_ILL_OPCODE_EXCEPTION	0x02
@@ -31,7 +31,7 @@
 #define MICROBLAZE_DBUS_EXCEPTION	0x04
 #define MICROBLAZE_DIV_ZERO_EXCEPTION	0x05
 #define MICROBLAZE_FPU_EXCEPTION	0x06
-#define MICROBLAZE_PRIVILEG_EXCEPTION	0x07
+#define MICROBLAZE_PRIVILEGED_EXCEPTION	0x07
 
 static DEFINE_SPINLOCK(die_lock);
 
@@ -66,6 +66,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 							int fsr, int addr)
 {
+#ifdef CONFIG_MMU
+	int code;
+	addr = regs->pc;
+#endif
+
 #if 0
 	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
 			type, user_mode(regs) ? "user" : "kernel", fsr,
@@ -74,7 +79,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 
 	switch (type & 0x1F) {
 	case MICROBLAZE_ILL_OPCODE_EXCEPTION:
-		_exception(SIGILL, regs, ILL_ILLOPC, addr);
+		if (user_mode(regs)) {
+			printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+		die("opcode exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_IBUS_EXCEPTION:
 		if (user_mode(regs)) {
@@ -95,11 +106,16 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DIV_ZERO_EXCEPTION:
-		printk(KERN_WARNING "Divide by zero exception\n");
-		_exception(SIGILL, regs, ILL_ILLOPC, addr);
+		if (user_mode(regs)) {
+			printk(KERN_WARNING "Divide by zero exception in user mode\n");
+			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+		die("Divide by exception", regs, SIGBUS);
 		break;
-
 	case MICROBLAZE_FPU_EXCEPTION:
+		printk(KERN_WARNING "FPU exception\n");
 		/* IEEE FP exception */
 		/* I removed fsr variable and use code var for storing fsr */
 		if (fsr & FSR_IO)
@@ -115,7 +131,20 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		_exception(SIGFPE, regs, fsr, addr);
 		break;
 
+#ifdef CONFIG_MMU
+	case MICROBLAZE_PRIVILEGED_EXCEPTION:
+		printk(KERN_WARNING "Privileged exception\n");
+		/* "brk r0,r0" - used as debug breakpoint */
+		if (get_user(code, (unsigned long *)regs->pc) == 0
+			&& code == 0x980c0000) {
+			_exception(SIGTRAP, regs, TRAP_BRKPT, addr);
+		} else {
+			_exception(SIGILL, regs, ILL_PRVOPC, addr);
+		}
+		break;
+#endif
 	default:
+	/* FIXME what to do in unexpected exception */
 		printk(KERN_WARNING "Unexpected exception %02x "
 			"PC=%08x in %s mode\n", type, (unsigned int) addr,
 			kernel_mode(regs) ? "kernel" : "user");
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 319dc35fc92..e568d6ec621 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -3,6 +3,26 @@
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -12,6 +32,22 @@
 #include <asm/thread_info.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_MMU
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+	.space	4096
+.global swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+#endif /* CONFIG_MMU */
+
 	.text
 ENTRY(_start)
 	mfs	r1, rmsr
@@ -32,6 +68,123 @@ _copy_fdt:
 	addik	r3, r3, -4 /* descrement loop */
 no_fdt_arg:
 
+#ifdef CONFIG_MMU
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line to __init_end. There is space for storing command line.
+ */
+	or	r6, r0, r0		/* incremment */
+	ori	r4, r0, __init_end	/* load address of command line */
+	tophys(r4,r4)			/* convert to phys address */
+	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+	lbu	r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+	sb	r7, r4, r6		/* addr[r4+r6]= r7*/
+	addik	r6, r6, 1		/* increment counting */
+	bgtid	r3, _copy_command_line	/* loop for all entries       */
+	addik	r3, r3, -1		/* descrement loop */
+	addik	r5, r4, 0		/* add new space for command line */
+	tovirt(r5,r5)
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+	or	r6, r0, r0				/* incremment */
+	ori	r4, r0, TOPHYS(_bram_load_start)	/* save bram context */
+	ori	r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+	lw	r7, r0, r6		/* r7 = r0 + r6 */
+	sw	r7, r4, r6		/* addr[r4 + r6] = r7*/
+	addik	r6, r6, 4		/* increment counting */
+	bgtid	r3, _copy_bram		/* loop for all entries */
+	addik	r3, r3, -4		/* descrement loop */
+#endif
+	/* We have to turn on the MMU right away. */
+
+	/*
+	 * Set up the initial MMU state so we can do the first level of
+	 * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+	 * virtual to physical.
+	 */
+	nop
+	addik	r3, r0, 63		/* Invalidate all TLB entries */
+_invalidate:
+	mts	rtlbx, r3
+	mts	rtlbhi, r0			/* flush: ensure V is clear   */
+	bgtid	r3, _invalidate		/* loop for all entries       */
+	addik	r3, r3, -1
+	/* sync */
+
+	/*
+	 * We should still be executing code at physical address area
+	 * RAM_BASEADDR at this point. However, kernel code is at
+	 * a virtual address. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
+	/*
+	 * Configure and load two entries into TLB slots 0 and 1.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	andi	r4,r4,0xfffffc00	/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	andi	r3,r3,0xfffffc00	/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+	mts     rtlbx,r0		/* TLB slow 0 */
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	addik	r4, r4, 0x01000000	/* Map next 16 M entries */
+	addik	r3, r3, 0x01000000
+
+	ori	r6,r0,1			/* TLB slot 1 */
+	mts     rtlbx,r6
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * Load a TLB entry for LMB, since we need access to
+	 * the exception vectors, using a 4k real==virtual mapping.
+	 */
+	ori	r6,r0,3			/* TLB slot 3 */
+	mts     rtlbx,r6
+
+	ori	r4,r0,(TLB_WR | TLB_EX)
+	ori	r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+	 * caches ready to work.
+	 */
+turn_on_mmu:
+	ori	r15,r0,start_here
+	ori	r4,r0,MSR_KERNEL_VMS
+	mts	rmsr,r4
+	nop
+	rted	r15,0			/* enables MMU */
+	nop
+
+start_here:
+#endif /* CONFIG_MMU */
+
 	/* Initialize small data anchors */
 	la	r13, r0, _KERNEL_SDA_BASE_
 	la	r2, r0, _KERNEL_SDA2_BASE_
@@ -51,6 +204,43 @@ no_fdt_arg:
 	brald	r15, r8
 	nop
 
+#ifndef CONFIG_MMU
 	la	r15, r0, machine_halt
 	braid	start_kernel
 	nop
+#else
+	/*
+	 * Initialize the MMU.
+	 */
+	bralid	r15, mmu_init
+	nop
+
+	/* Go back to running unmapped so we can load up new values
+	 * and change to using our exception vectors.
+	 * On the MicroBlaze, all we invalidate the used TLB entries to clear
+	 * the old 16M byte TLB mappings.
+	 */
+	ori	r15,r0,TOPHYS(kernel_load_context)
+	ori	r4,r0,MSR_KERNEL
+	mts	rmsr,r4
+	nop
+	bri	4
+	rted	r15,0
+	nop
+
+	/* Load up the kernel context */
+kernel_load_context:
+	# Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away.
+	ori	r5,r0,3
+	mts     rtlbx,r5
+	nop
+	mts	rtlbhi,r0
+	nop
+	addi	r15, r0, machine_halt
+	ori	r17, r0, start_kernel
+	ori	r4, r0, MSR_KERNEL_VMS
+	mts	rmsr, r4
+	nop
+	rted	r17, 0		/* enable MMU and jump to start_kernel */
+	nop
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index cf9486d9983..9d591cd74fc 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -53,6 +53,12 @@
  *   - Illegal instruction opcode
  *   - Divide-by-zero
  *
+ *   - Privileged instruction exception (MMU)
+ *   - Data storage exception (MMU)
+ *   - Instruction storage exception (MMU)
+ *   - Data TLB miss exception (MMU)
+ *   - Instruction TLB miss exception (MMU)
+ *
  * Note we disable interrupts during exception handling, otherwise we will
  * possibly get multiple re-entrancy if interrupt handles themselves cause
  * exceptions. JW
@@ -71,9 +77,24 @@
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
+#ifndef CONFIG_MMU
 #define EX_HANDLER_STACK_SIZ	(4*19)
+#endif
 #define NUM_TO_REG(num)		r ## num
 
+#ifdef CONFIG_MMU
+/* FIXME you can't change first load of MSR because there is
+ * hardcoded jump bri 4 */
+	#define RESTORE_STATE			\
+		lwi	r3, r1, PT_R3;		\
+		lwi	r4, r1, PT_R4;		\
+		lwi	r5, r1, PT_R5;		\
+		lwi	r6, r1, PT_R6;		\
+		lwi	r11, r1, PT_R11;	\
+		lwi	r31, r1, PT_R31;	\
+		lwi	r1, r0, TOPHYS(r0_ram + 0);
+#endif /* CONFIG_MMU */
+
 #define LWREG_NOP			\
 	bri	ex_handler_unhandled;	\
 	nop;
@@ -106,6 +127,54 @@
 	or	r3, r0, NUM_TO_REG (regnum);		\
 	bri	ex_sw_tail;
 
+#ifdef CONFIG_MMU
+	#define R3_TO_LWREG_VM_V(regnum)		\
+		brid	ex_lw_end_vm;			\
+		swi	r3, r7, 4 * regnum;
+
+	#define R3_TO_LWREG_VM(regnum)			\
+		brid	ex_lw_end_vm;			\
+		or	NUM_TO_REG (regnum), r0, r3;
+
+	#define SWREG_TO_R3_VM_V(regnum)		\
+		brid	ex_sw_tail_vm;			\
+		lwi	r3, r7, 4 * regnum;
+
+	#define SWREG_TO_R3_VM(regnum)			\
+		brid	ex_sw_tail_vm;			\
+		or	r3, r0, NUM_TO_REG (regnum);
+
+	/* Shift right instruction depending on available configuration */
+	#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
+	#define BSRLI(rD, rA, imm)	\
+		bsrli rD, rA, imm
+	#elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
+	#define BSRLI(rD, rA, imm)	\
+		ori rD, r0, (1 << imm);	\
+		idivu rD, rD, rA
+	#else
+	#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
+	/* Only the used shift constants defined here - add more if needed */
+	#define BSRLI2(rD, rA)				\
+		srl rD, rA;		/* << 1 */	\
+		srl rD, rD;		/* << 2 */
+	#define BSRLI10(rD, rA)				\
+		srl rD, rA;		/* << 1 */	\
+		srl rD, rD;		/* << 2 */	\
+		srl rD, rD;		/* << 3 */	\
+		srl rD, rD;		/* << 4 */	\
+		srl rD, rD;		/* << 5 */	\
+		srl rD, rD;		/* << 6 */	\
+		srl rD, rD;		/* << 7 */	\
+		srl rD, rD;		/* << 8 */	\
+		srl rD, rD;		/* << 9 */	\
+		srl rD, rD		/* << 10 */
+	#define BSRLI20(rD, rA)		\
+		BSRLI10(rD, rA);	\
+		BSRLI10(rD, rD)
+	#endif
+#endif /* CONFIG_MMU */
+
 .extern other_exception_handler /* Defined in exception.c */
 
 /*
@@ -163,34 +232,119 @@
 
 /* wrappers to restore state before coming to entry.S */
 
+#ifdef CONFIG_MMU
+.section .rodata
+.align 4
+_MB_HW_ExceptionVectorTable:
+/*  0 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+/*  1 - Unaligned data access exception */
+	.long	TOPHYS(handle_unaligned_ex)
+/*  2 - Illegal op-code exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  3 - Instruction bus error exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  4 - Data bus error exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  5 - Divide by zero exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  6 - Floating point unit exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  7 - Privileged instruction exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  8 - 15 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+/* 16 - Data storage exception */
+	.long	TOPHYS(handle_data_storage_exception)
+/* 17 - Instruction storage exception */
+	.long	TOPHYS(handle_instruction_storage_exception)
+/* 18 - Data TLB miss exception */
+	.long	TOPHYS(handle_data_tlb_miss_exception)
+/* 19 - Instruction TLB miss exception */
+	.long	TOPHYS(handle_instruction_tlb_miss_exception)
+/* 20 - 31 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+#endif
+
 .global _hw_exception_handler
 .section .text
 .align 4
 .ent _hw_exception_handler
 _hw_exception_handler:
+#ifndef CONFIG_MMU
 	addik	r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
+#else
+	swi	r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
+	/* Save date to kernel memory. Here is the problem
+	 * when you came from user space */
+	ori	r1, r0, TOPHYS(r0_ram + 28);
+#endif
 	swi	r3, r1, PT_R3
 	swi	r4, r1, PT_R4
 	swi	r5, r1, PT_R5
 	swi	r6, r1, PT_R6
 
-	mfs	r5, rmsr;
-	nop
-	swi	r5, r1, 0;
-	mfs	r4, rbtr	/* Save BTR before jumping to handler */
-	nop
+#ifdef CONFIG_MMU
+	swi	r11, r1, PT_R11
+	swi	r31, r1, PT_R31
+	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
+#endif
+
 	mfs	r3, resr
 	nop
+	mfs	r4, rear;
+	nop
 
+#ifndef CONFIG_MMU
 	andi	r5, r3, 0x1000;		/* Check ESR[DS] */
 	beqi	r5, not_in_delay_slot;	/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
 not_in_delay_slot:
 	swi	r17, r1, PT_R17
+#endif
 
 	andi	r5, r3, 0x1F;		/* Extract ESR[EXC] */
 
+#ifdef CONFIG_MMU
+	/* Calculate exception vector offset = r5 << 2 */
+	addk	r6, r5, r5; /* << 1 */
+	addk	r6, r6, r6; /* << 2 */
+
+/* counting which exception happen */
+	lwi	r5, r0, 0x200 + TOPHYS(r0_ram)
+	addi	r5, r5, 1
+	swi	r5, r0, 0x200 + TOPHYS(r0_ram)
+	lwi	r5, r6, 0x200 + TOPHYS(r0_ram)
+	addi	r5, r5, 1
+	swi	r5, r6, 0x200 + TOPHYS(r0_ram)
+/* end */
+	/* Load the HW Exception vector */
+	lwi	r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
+	bra	r6
+
+full_exception_trapw:
+	RESTORE_STATE
+	bri	full_exception_trap
+#else
 	/* Exceptions enabled here. This will allow nested exceptions */
 	mfs	r6, rmsr;
 	nop
@@ -254,6 +408,7 @@ handle_other_ex: /* Handle Other exceptions here */
 	lwi	r18, r1, PT_R18
 
 	bri	ex_handler_done; /* Complete exception handling */
+#endif
 
 /* 0x01 - Unaligned data access exception
  * This occurs when a word access is not aligned on a word boundary,
@@ -265,11 +420,28 @@ handle_other_ex: /* Handle Other exceptions here */
 handle_unaligned_ex:
 	/* Working registers already saved: R3, R4, R5, R6
 	 *  R3 = ESR
-	 *  R4 = BTR
+	 *  R4 = EAR
 	 */
-	mfs	r4, rear;
+#ifdef CONFIG_MMU
+	andi	r6, r3, 0x1000			/* Check ESR[DS] */
+	beqi	r6, _no_delayslot		/* Branch if ESR[DS] not set */
+	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
+_no_delayslot:
+#endif
+
+#ifdef CONFIG_MMU
+	/* Check if unaligned address is last on a 4k page */
+		andi	r5, r4, 0xffc
+		xori	r5, r5, 0xffc
+		bnei	r5, _unaligned_ex2
+	_unaligned_ex1:
+		RESTORE_STATE;
+/* Another page must be accessed or physical address not in page table */
+		bri	unaligned_data_trap
 
+	_unaligned_ex2:
+#endif
 	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
 	srl	r6, r6;
@@ -278,6 +450,45 @@ handle_unaligned_ex:
 	srl	r6, r6;
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
+#ifdef CONFIG_MMU
+	/* Get physical address */
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	ori	r5, r0, CONFIG_KERNEL_START
+	cmpu	r5, r4, r5
+	bgti	r5, _unaligned_ex3
+	ori	r5, r0, swapper_pg_dir
+	bri	_unaligned_ex4
+
+	/* Get the PGD for the current thread. */
+_unaligned_ex3: /* user thread */
+	addi	r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
+	lwi	r5, r5, TASK_THREAD + PGDIR
+_unaligned_ex4:
+	tophys(r5,r5)
+	BSRLI(r6,r4,20)			/* Create L1 (pgdir/pmd) address */
+	andi	r6, r6, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
+	or	r5, r5, r6
+	lwi	r6, r5, 0		/* Get L1 entry */
+	andi	r5, r6, 0xfffff000	/* Extract L2 (pte) base address. */
+	beqi	r5, _unaligned_ex1	/* Bail if no table */
+
+	tophys(r5,r5)
+	BSRLI(r6,r4,10)			/* Compute PTE address */
+	andi	r6, r6, 0xffc
+	andi	r5, r5, 0xfffff003
+	or	r5, r5, r6
+	lwi	r5, r5, 0		/* Get Linux PTE */
+
+	andi	r6, r5, _PAGE_PRESENT
+	beqi	r6, _unaligned_ex1	/* Bail if no page */
+
+	andi	r5, r5, 0xfffff000	/* Extract RPN */
+	andi	r4, r4, 0x00000fff	/* Extract offset */
+	or	r4, r4, r5		/* Create physical address */
+#endif /* CONFIG_MMU */
 
 	andi	r6, r3, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
@@ -355,6 +566,7 @@ ex_shw:
 ex_sw_end: /* Exception handling of store word, ends. */
 
 ex_handler_done:
+#ifndef CONFIG_MMU
 	lwi	r5, r1, 0 /* RMSR */
 	mts	rmsr, r5
 	nop
@@ -366,13 +578,455 @@ ex_handler_done:
 
 	rted	r17, 0
 	addik	r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
+#else
+	RESTORE_STATE;
+	rted	r17, 0
+	nop
+#endif
+
+#ifdef CONFIG_MMU
+	/* Exception vector entry code. This code runs with address translation
+	 * turned off (i.e. using physical addresses). */
+
+	/* Exception vectors. */
+
+	/* 0x10 - Data Storage Exception
+	 * This happens for just a few reasons. U0 set (but we don't do that),
+	 * or zone protection fault (user violation, write to protected page).
+	 * If this is just an update of modified status, we do that quickly
+	 * and exit. Otherwise, we call heavyweight functions to do the work.
+	 */
+	handle_data_storage_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables.
+		 */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex3
+		/* First, check if it was a zone fault (which means a user
+		 * tried to access a kernel or read-protected page - always
+		 * a SEGV). All other faults here must be stores, so no
+		 * need to check ESR_S as well. */
+		mfs	r4, resr
+		nop
+		andi	r4, r4, 0x800		/* ESR_Z - zone protection */
+		bnei	r4, ex2
+
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex4
+
+		/* Get the PGD for the current thread. */
+	ex3:
+		/* First, check if it was a zone fault (which means a user
+		 * tried to access a kernel or read-protected page - always
+		 * a SEGV). All other faults here must be stores, so no
+		 * need to check ESR_S as well. */
+		mfs	r4, resr
+		nop
+		andi	r4, r4, 0x800		/* ESR_Z */
+		bnei	r4, ex2
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex4:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex2			/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_RW	/* Is it writeable? */
+		beqi	r6, ex2			/* Bail if not */
+
+		/* Update 'changed' */
+		ori	r4, r4, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+		swi	r4, r5, 0		/* Update Linux page table */
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
+
+		/* find the TLB index that caused the fault. It has to be here*/
+		mts	rtlbsx, r3
+		nop
+		mfs	r5, rtlbx		/* DEBUG: TBD */
+		nop
+		mts	rtlblo, r4		/* Load TLB LO */
+		nop
+						/* Will sync shadow TLBs */
+
+		/* Done...restore registers and get out of here. */
+		mts	rpid, r11
+		nop
+		bri 4
+
+		RESTORE_STATE;
+		rted	r17, 0
+		nop
+	ex2:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out. */
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		bri	page_fault_data_trap
+
+
+	/* 0x11 - Instruction Storage Exception
+	 * This is caused by a fetch from non-execute or guarded pages. */
+	handle_instruction_storage_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+
+		mfs	r3, rear		/* Get faulting address */
+		nop
+		RESTORE_STATE;
+		bri	page_fault_instr_trap
+
+	/* 0x12 - Data TLB Miss Exception
+	 * As the name implies, translation is not in the MMU, so search the
+	 * page tables and fix it. The only purpose of this function is to
+	 * load TLB entries from the page table if they exist.
+	 */
+	handle_data_tlb_miss_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables. */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex5
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex6
 
+		/* Get the PGD for the current thread. */
+	ex5:
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex6:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex7			/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_PRESENT
+		beqi	r6, ex7
+
+		ori	r4, r4, _PAGE_ACCESSED
+		swi	r4, r5, 0
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+
+		bri	finish_tlb_load
+	ex7:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out.
+		 */
+		mts	rpid, r11
+		nop
+		bri	4
+		RESTORE_STATE;
+		bri	page_fault_data_trap
+
+	/* 0x13 - Instruction TLB Miss Exception
+	 * Nearly the same as above, except we get our information from
+	 * different registers and bailout to a different point.
+	 */
+	handle_instruction_tlb_miss_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 *  R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables.
+		 */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex8
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex9
+
+		/* Get the PGD for the current thread. */
+	ex8:
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex9:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex10		/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_PRESENT
+		beqi	r6, ex7
+
+		ori	r4, r4, _PAGE_ACCESSED
+		swi	r4, r5, 0
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+
+		bri	finish_tlb_load
+	ex10:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out.
+		 */
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		bri	page_fault_instr_trap
+
+/* Both the instruction and data TLB miss get to this point to load the TLB.
+ *	r3 - EA of fault
+ *	r4 - TLB LO (info from Linux PTE)
+ *	r5, r6 - available to use
+ *	PID - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ * A common place to load the TLB.
+ */
+	tlb_index:
+		.long	1 /* MS: storing last used tlb index */
+	finish_tlb_load:
+		/* MS: load the last used TLB index. */
+		lwi	r5, r0, TOPHYS(tlb_index)
+		addik	r5, r5, 1 /* MS: inc tlb_index -> use next one */
+
+/* MS: FIXME this is potential fault, because this is mask not count */
+		andi	r5, r5, (MICROBLAZE_TLB_SIZE-1)
+		ori	r6, r0, 1
+		cmp	r31, r5, r6
+		blti	r31, sem
+		addik	r5, r6, 1
+	sem:
+		/* MS: save back current TLB index */
+		swi	r5, r0, TOPHYS(tlb_index)
+
+		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
+		mts	rtlbx, r5		/* MS: save current TLB */
+		nop
+		mts	rtlblo,	r4		/* MS: save to TLB LO */
+		nop
+
+		/* Create EPN. This is the faulting address plus a static
+		 * set of bits. These are size, valid, E, U0, and ensure
+		 * bits 20 and 21 are zero.
+		 */
+		andi	r3, r3, 0xfffff000
+		ori	r3, r3, 0x0c0
+		mts	rtlbhi,	r3		/* Load TLB HI */
+		nop
+
+		/* Done...restore registers and get out of here. */
+	ex12:
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		rted	r17, 0
+		nop
+
+	/* extern void giveup_fpu(struct task_struct *prev)
+	 *
+	 * The MicroBlaze processor may have an FPU, so this should not just
+	 * return: TBD.
+	 */
+	.globl giveup_fpu;
+	.align 4;
+	giveup_fpu:
+		bralid	r15,0			/* TBD */
+		nop
+
+	/* At present, this routine just hangs. - extern void abort(void) */
+	.globl abort;
+	.align 4;
+	abort:
+		br	r0
+
+	.globl set_context;
+	.align 4;
+	set_context:
+		mts	rpid, r5	/* Shadow TLBs are automatically */
+		nop
+		bri	4		/* flushed by changing PID */
+		rtsd	r15,8
+		nop
+
+#endif
 .end _hw_exception_handler
 
+#ifdef CONFIG_MMU
+/* Unaligned data access exception last on a 4k page for MMU.
+ * When this is called, we are in virtual mode with exceptions enabled
+ * and registers 1-13,15,17,18 saved.
+ *
+ * R3 = ESR
+ * R4 = EAR
+ * R7 = pointer to saved registers (struct pt_regs *regs)
+ *
+ * This handler perform the access, and returns via ret_from_exc.
+ */
+.global _unaligned_data_exception
+.ent _unaligned_data_exception
+_unaligned_data_exception:
+	andi	r8, r3, 0x3E0;	/* Mask and extract the register operand */
+	BSRLI(r8,r8,2);		/* r8 >> 2 = register operand * 8 */
+	andi	r6, r3, 0x400;	/* Extract ESR[S] */
+	bneid	r6, ex_sw_vm;
+	andi	r6, r3, 0x800;	/* Extract ESR[W] - delay slot */
+ex_lw_vm:
+	beqid	r6, ex_lhw_vm;
+	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
+/* Load a word, byte-by-byte from destination address and save it in tmp space*/
+	la	r6, r0, ex_tmp_data_loc_0;
+	sbi	r5, r6, 0;
+	lbui	r5, r4, 1;
+	sbi	r5, r6, 1;
+	lbui	r5, r4, 2;
+	sbi	r5, r6, 2;
+	lbui	r5, r4, 3;
+	sbi	r5, r6, 3;
+	brid	ex_lw_tail_vm;
+/* Get the destination register value into r3 - delay slot */
+	lwi	r3, r6, 0;
+ex_lhw_vm:
+	/* Load a half-word, byte-by-byte from destination address and
+	 * save it in tmp space */
+	la	r6, r0, ex_tmp_data_loc_0;
+	sbi	r5, r6, 0;
+	lbui	r5, r4, 1;
+	sbi	r5, r6, 1;
+	lhui	r3, r6, 0;	/* Get the destination register value into r3 */
+ex_lw_tail_vm:
+	/* Form load_word jump table offset (lw_table_vm + (8 * regnum)) */
+	addik	r5, r8, lw_table_vm;
+	bra	r5;
+ex_lw_end_vm:			/* Exception handling of load word, ends */
+	brai	ret_from_exc;
+ex_sw_vm:
+/* Form store_word jump table offset (sw_table_vm + (8 * regnum)) */
+	addik	r5, r8, sw_table_vm;
+	bra	r5;
+ex_sw_tail_vm:
+	la	r5, r0, ex_tmp_data_loc_0;
+	beqid	r6, ex_shw_vm;
+	swi	r3, r5, 0;	/* Get the word - delay slot */
+	/* Store the word, byte-by-byte into destination address */
+	lbui	r3, r5, 0;
+	sbi	r3, r4, 0;
+	lbui	r3, r5, 1;
+	sbi	r3, r4, 1;
+	lbui	r3, r5, 2;
+	sbi	r3, r4, 2;
+	lbui	r3, r5, 3;
+	brid	ret_from_exc;
+	sbi	r3, r4, 3;	/* Delay slot */
+ex_shw_vm:
+	/* Store the lower half-word, byte-by-byte into destination address */
+	lbui	r3, r5, 2;
+	sbi	r3, r4, 0;
+	lbui	r3, r5, 3;
+	brid	ret_from_exc;
+	sbi	r3, r4, 1;	/* Delay slot */
+ex_sw_end_vm:			/* Exception handling of store word, ends. */
+.end _unaligned_data_exception
+#endif /* CONFIG_MMU */
+
 ex_handler_unhandled:
 /* FIXME add handle function for unhandled exception - dump register */
 	bri 0
 
+/*
+ * hw_exception_handler Jump Table
+ * - Contains code snippets for each register that caused the unalign exception
+ * - Hence exception handler is NOT self-modifying
+ * - Separate table for load exceptions and store exceptions.
+ * - Each table is of size: (8 * 32) = 256 bytes
+ */
+
 .section .text
 .align 4
 lw_table:
@@ -407,7 +1061,11 @@ lw_r27:		R3_TO_LWREG	(27);
 lw_r28:		R3_TO_LWREG	(28);
 lw_r29:		R3_TO_LWREG	(29);
 lw_r30:		R3_TO_LWREG	(30);
+#ifdef CONFIG_MMU
+lw_r31: 	R3_TO_LWREG_V	(31);
+#else
 lw_r31:		R3_TO_LWREG	(31);
+#endif
 
 sw_table:
 sw_r0:		SWREG_TO_R3	(0);
@@ -441,7 +1099,81 @@ sw_r27:		SWREG_TO_R3	(27);
 sw_r28:		SWREG_TO_R3	(28);
 sw_r29:		SWREG_TO_R3	(29);
 sw_r30:		SWREG_TO_R3	(30);
+#ifdef CONFIG_MMU
+sw_r31:		SWREG_TO_R3_V	(31);
+#else
 sw_r31:		SWREG_TO_R3	(31);
+#endif
+
+#ifdef CONFIG_MMU
+lw_table_vm:
+lw_r0_vm:	R3_TO_LWREG_VM		(0);
+lw_r1_vm:	R3_TO_LWREG_VM_V	(1);
+lw_r2_vm:	R3_TO_LWREG_VM_V	(2);
+lw_r3_vm:	R3_TO_LWREG_VM_V	(3);
+lw_r4_vm:	R3_TO_LWREG_VM_V	(4);
+lw_r5_vm:	R3_TO_LWREG_VM_V	(5);
+lw_r6_vm:	R3_TO_LWREG_VM_V	(6);
+lw_r7_vm:	R3_TO_LWREG_VM_V	(7);
+lw_r8_vm:	R3_TO_LWREG_VM_V	(8);
+lw_r9_vm:	R3_TO_LWREG_VM_V	(9);
+lw_r10_vm:	R3_TO_LWREG_VM_V	(10);
+lw_r11_vm:	R3_TO_LWREG_VM_V	(11);
+lw_r12_vm:	R3_TO_LWREG_VM_V	(12);
+lw_r13_vm:	R3_TO_LWREG_VM_V	(13);
+lw_r14_vm:	R3_TO_LWREG_VM		(14);
+lw_r15_vm:	R3_TO_LWREG_VM_V	(15);
+lw_r16_vm:	R3_TO_LWREG_VM		(16);
+lw_r17_vm:	R3_TO_LWREG_VM_V	(17);
+lw_r18_vm:	R3_TO_LWREG_VM_V	(18);
+lw_r19_vm:	R3_TO_LWREG_VM		(19);
+lw_r20_vm:	R3_TO_LWREG_VM		(20);
+lw_r21_vm:	R3_TO_LWREG_VM		(21);
+lw_r22_vm:	R3_TO_LWREG_VM		(22);
+lw_r23_vm:	R3_TO_LWREG_VM		(23);
+lw_r24_vm:	R3_TO_LWREG_VM		(24);
+lw_r25_vm:	R3_TO_LWREG_VM		(25);
+lw_r26_vm:	R3_TO_LWREG_VM		(26);
+lw_r27_vm:	R3_TO_LWREG_VM		(27);
+lw_r28_vm:	R3_TO_LWREG_VM		(28);
+lw_r29_vm:	R3_TO_LWREG_VM		(29);
+lw_r30_vm:	R3_TO_LWREG_VM		(30);
+lw_r31_vm:	R3_TO_LWREG_VM_V	(31);
+
+sw_table_vm:
+sw_r0_vm:	SWREG_TO_R3_VM		(0);
+sw_r1_vm:	SWREG_TO_R3_VM_V	(1);
+sw_r2_vm:	SWREG_TO_R3_VM_V	(2);
+sw_r3_vm:	SWREG_TO_R3_VM_V	(3);
+sw_r4_vm:	SWREG_TO_R3_VM_V	(4);
+sw_r5_vm:	SWREG_TO_R3_VM_V	(5);
+sw_r6_vm:	SWREG_TO_R3_VM_V	(6);
+sw_r7_vm:	SWREG_TO_R3_VM_V	(7);
+sw_r8_vm:	SWREG_TO_R3_VM_V	(8);
+sw_r9_vm:	SWREG_TO_R3_VM_V	(9);
+sw_r10_vm:	SWREG_TO_R3_VM_V	(10);
+sw_r11_vm:	SWREG_TO_R3_VM_V	(11);
+sw_r12_vm:	SWREG_TO_R3_VM_V	(12);
+sw_r13_vm:	SWREG_TO_R3_VM_V	(13);
+sw_r14_vm:	SWREG_TO_R3_VM		(14);
+sw_r15_vm:	SWREG_TO_R3_VM_V	(15);
+sw_r16_vm:	SWREG_TO_R3_VM		(16);
+sw_r17_vm:	SWREG_TO_R3_VM_V	(17);
+sw_r18_vm:	SWREG_TO_R3_VM_V	(18);
+sw_r19_vm:	SWREG_TO_R3_VM		(19);
+sw_r20_vm:	SWREG_TO_R3_VM		(20);
+sw_r21_vm:	SWREG_TO_R3_VM		(21);
+sw_r22_vm:	SWREG_TO_R3_VM		(22);
+sw_r23_vm:	SWREG_TO_R3_VM		(23);
+sw_r24_vm:	SWREG_TO_R3_VM		(24);
+sw_r25_vm:	SWREG_TO_R3_VM		(25);
+sw_r26_vm:	SWREG_TO_R3_VM		(26);
+sw_r27_vm:	SWREG_TO_R3_VM		(27);
+sw_r28_vm:	SWREG_TO_R3_VM		(28);
+sw_r29_vm:	SWREG_TO_R3_VM		(29);
+sw_r30_vm:	SWREG_TO_R3_VM		(30);
+sw_r31_vm:	SWREG_TO_R3_VM_V	(31);
+#endif /* CONFIG_MMU */
 
 /* Temporary data structures used in the handler */
 .section .data
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index 5f71790e3c3..59ff20e33e0 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -45,3 +45,5 @@ extern void __udivsi3(void);
 EXPORT_SYMBOL(__udivsi3);
 extern void __umodsi3(void);
 EXPORT_SYMBOL(__umodsi3);
+extern char *_ebss;
+EXPORT_SYMBOL_GPL(_ebss);
diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S
new file mode 100644
index 00000000000..df16c6287a8
--- /dev/null
+++ b/arch/microblaze/kernel/misc.S
@@ -0,0 +1,120 @@
+/*
+ * Miscellaneous low-level MMU functions.
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ * Derived from arch/ppc/kernel/misc.S
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+	.text
+/*
+ * Flush MMU TLB
+ *
+ * We avoid flushing the pinned 0, 1 and possibly 2 entries.
+ */
+.globl _tlbia;
+.align 4;
+_tlbia:
+	addik	r12, r0, 63 /* flush all entries (63 - 3) */
+	/* isync */
+_tlbia_1:
+	mts	rtlbx, r12
+	nop
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+	addik	r11, r12, -2
+	bneid	r11, _tlbia_1 /* loop for all entries */
+	addik	r12, r12, -1
+	/* sync */
+	rtsd	r15, 8
+	nop
+
+/*
+ * Flush MMU TLB for a particular address (in r5)
+ */
+.globl _tlbie;
+.align 4;
+_tlbie:
+	mts	rtlbsx, r5 /* look up the address in TLB */
+	nop
+	mfs	r12, rtlbx /* Retrieve index */
+	nop
+	blti	r12, _tlbie_1 /* Check if found */
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+_tlbie_1:
+	rtsd	r15, 8
+	nop
+
+/*
+ * Allocate TLB entry for early console
+ */
+.globl early_console_reg_tlb_alloc;
+.align 4;
+early_console_reg_tlb_alloc:
+	/*
+	 * Load a TLB entry for the UART, so that microblaze_progress() can use
+	 * the UARTs nice and early.  We use a 4k real==virtual mapping.
+	 */
+	ori	r4, r0, 63
+	mts	rtlbx, r4 /* TLB slot 2 */
+
+	or	r4,r5,r0
+	andi	r4,r4,0xfffff000
+	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+	andi	r5,r5,0xfffff000
+	ori	r5,r5,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4 /* Load the data portion of the entry */
+	nop
+	mts	rtlbhi,r5 /* Load the tag portion of the entry */
+	nop
+	rtsd	r15, 8
+	nop
+
+/*
+ * Copy a whole page (4096 bytes).
+ */
+#define COPY_16_BYTES		\
+	lwi	r7, r6, 0;	\
+	lwi	r8, r6, 4;	\
+	lwi	r9, r6, 8;	\
+	lwi	r10, r6, 12;	\
+	swi	r7, r5, 0;	\
+	swi	r8, r5, 4;	\
+	swi	r9, r5, 8;	\
+	swi	r10, r5, 12
+
+
+/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
+#define DCACHE_LINE_BYTES (4 * 4)
+
+.globl copy_page;
+.align 4;
+copy_page:
+	ori	r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
+_copy_page_loop:
+	COPY_16_BYTES
+#if DCACHE_LINE_BYTES >= 32
+	COPY_16_BYTES
+#endif
+	addik	r6, r6, DCACHE_LINE_BYTES
+	addik	r5, r5, DCACHE_LINE_BYTES
+	bneid	r11, _copy_page_loop
+	addik	r11, r11, -1
+	rtsd	r15, 8
+	nop
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 07d4fa339ed..00b12c6d532 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -126,9 +126,54 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	else
 		childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
 
+#ifndef CONFIG_MMU
 	memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
 	ti->cpu_context.r1 = (unsigned long)childregs;
 	ti->cpu_context.msr = (unsigned long)childregs->msr;
+#else
+
+	/* if creating a kernel thread then update the current reg (we don't
+	 * want to use the parent's value when restoring by POP_STATE) */
+	if (kernel_mode(regs))
+		/* save new current on stack to use POP_STATE */
+		childregs->CURRENT_TASK = (unsigned long)p;
+	/* if returning to user then use the parent's value of this register */
+
+	/* if we're creating a new kernel thread then just zeroing all
+	 * the registers. That's OK for a brand new thread.*/
+	/* Pls. note that some of them will be restored in POP_STATE */
+	if (kernel_mode(regs))
+		memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+	/* if this thread is created for fork/vfork/clone, then we want to
+	 * restore all the parent's context */
+	/* in addition to the registers which will be restored by POP_STATE */
+	else {
+		ti->cpu_context = *(struct cpu_context *)regs;
+		childregs->msr |= MSR_UMS;
+	}
+
+	/* FIXME STATE_SAVE_PT_OFFSET; */
+	ti->cpu_context.r1  = (unsigned long)childregs - STATE_SAVE_ARG_SPACE;
+	/* we should consider the fact that childregs is a copy of the parent
+	 * regs which were saved immediately after entering the kernel state
+	 * before enabling VM. This MSR will be restored in switch_to and
+	 * RETURN() and we want to have the right machine state there
+	 * specifically this state must have INTs disabled before and enabled
+	 * after performing rtbd
+	 * compose the right MSR for RETURN(). It will work for switch_to also
+	 * excepting for VM and UMS
+	 * don't touch UMS , CARRY and cache bits
+	 * right now MSR is a copy of parent one */
+	childregs->msr |= MSR_BIP;
+	childregs->msr &= ~MSR_EIP;
+	childregs->msr |= MSR_IE;
+	childregs->msr &= ~MSR_VM;
+	childregs->msr |= MSR_VMS;
+	childregs->msr |= MSR_EE; /* exceptions will be enabled*/
+
+	ti->cpu_context.msr = (childregs->msr|MSR_VM);
+	ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+#endif
 	ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
 
 	if (clone_flags & CLONE_SETTLS)
@@ -137,6 +182,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	return 0;
 }
 
+#ifndef CONFIG_MMU
 /*
  * Return saved PC of a blocked thread.
  */
@@ -151,6 +197,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	else
 		return ctx->r14;
 }
+#endif
 
 static void kernel_thread_helper(int (*fn)(void *), void *arg)
 {
@@ -173,6 +220,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 			&regs, 0, NULL, NULL);
 }
+EXPORT_SYMBOL_GPL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *p)
 {
@@ -188,3 +236,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 	regs->r1 = usp;
 	regs->pt_mode = 0;
 }
+
+#ifdef CONFIG_MMU
+#include <linux/elfcore.h>
+/*
+ * Set up a thread for executing a new program
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+	return 0; /* MicroBlaze has no separate FPU registers */
+}
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 34c48718061..c005cc6f1aa 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -509,12 +509,13 @@ static void __init early_init_dt_check_for_initrd(unsigned long node)
 
 	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
 	if (prop) {
-		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+		initrd_start = (unsigned long)
+					__va((u32)of_read_ulong(prop, l/4));
 
 		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
 		if (prop) {
 			initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, l/4));
+					__va((u32)of_read_ulong(prop, 1/4));
 			initrd_below_start_ok = 1;
 		} else {
 			initrd_start = 0;
@@ -563,7 +564,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
 
 #ifdef CONFIG_CMDLINE
+#ifndef CONFIG_CMDLINE_FORCE
 	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+#endif
 		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 #endif /* CONFIG_CMDLINE */
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index eb6b41758e2..8709bea0960 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -42,10 +42,6 @@ char cmd_line[COMMAND_LINE_SIZE];
 
 void __init setup_arch(char **cmdline_p)
 {
-#ifdef CONFIG_CMDLINE_FORCE
-	strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-	strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
 	*cmdline_p = cmd_line;
 
 	console_verbose();
@@ -102,14 +98,34 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 {
 	unsigned long *src, *dst = (unsigned long *)0x0;
 
+	/* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the
+	 * end of kernel. There are two position which we want to check.
+	 * The first is __init_end and the second __bss_start.
+	 */
+#ifdef CONFIG_MTD_UCLINUX
+	int romfs_size;
+	unsigned int romfs_base;
+	char *old_klimit = klimit;
+
+	romfs_base = (ram ? ram : (unsigned int)&__init_end);
+	romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	if (!romfs_size) {
+		romfs_base = (unsigned int)&__bss_start;
+		romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	}
+
+	/* Move ROMFS out of BSS before clearing it */
+	if (romfs_size > 0) {
+		memmove(&_ebss, (int *)romfs_base, romfs_size);
+		klimit += romfs_size;
+	}
+#endif
+
 /* clearing bss section */
 	memset(__bss_start, 0, __bss_stop-__bss_start);
 	memset(_ssbss, 0, _esbss-_ssbss);
 
-	/*
-	 * Copy command line passed from bootloader, or use default
-	 * if none provided, or forced
-	 */
+	/* Copy command line passed from bootloader */
 #ifndef CONFIG_CMDLINE_BOOL
 	if (cmdline && cmdline[0] != '\0')
 		strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
@@ -126,27 +142,15 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
 
 #ifdef CONFIG_MTD_UCLINUX
-	{
-		int size;
-		unsigned int romfs_base;
-		romfs_base = (ram ? ram : (unsigned int)&__init_end);
-		/* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the
-		 * end of kernel, which is ROMFS_LOCATION defined above. */
-		size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
-		early_printk("Found romfs @ 0x%08x (0x%08x)\n",
-				romfs_base, size);
-		early_printk("#### klimit %p ####\n", klimit);
-		BUG_ON(size < 0); /* What else can we do? */
-
-		/* Use memmove to handle likely case of memory overlap */
-		early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n",
-			size, romfs_base, (unsigned)&_ebss);
-		memmove(&_ebss, (int *)romfs_base, size);
-
-		/* update klimit */
-		klimit += PAGE_ALIGN(size);
-		early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
-	}
+	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+			romfs_base, romfs_size);
+	early_printk("#### klimit %p ####\n", old_klimit);
+	BUG_ON(romfs_size < 0); /* What else can we do? */
+
+	early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+			romfs_size, romfs_base, (unsigned)&_ebss);
+
+	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 40d36931e36..4c0e6521b11 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -152,8 +152,8 @@ struct rt_sigframe {
 	unsigned long tramp[2];	/* signal trampoline */
 };
 
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
+static int restore_sigcontext(struct pt_regs *regs,
+				struct sigcontext __user *sc, int *rval_p)
 {
 	unsigned int err = 0;
 
@@ -211,11 +211,10 @@ badframe:
 
 asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 {
-	struct rt_sigframe *frame =
-			(struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+	struct rt_sigframe __user *frame =
+		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
 
 	sigset_t set;
-	stack_t st;
 	int rval;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -233,11 +232,10 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
 		goto badframe;
 
-	if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	 call it and ignore errors. */
-	do_sigaltstack(&st, NULL, regs->r1);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+		goto badframe;
 
 	return rval;
 
@@ -251,7 +249,7 @@ badframe:
  */
 
 static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		unsigned long mask)
 {
 	int err = 0;
@@ -278,7 +276,7 @@ setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
 /*
  * Determine which stack to use..
  */
-static inline void *
+static inline void __user *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
 	/* Default to using normal stack */
@@ -287,87 +285,13 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-					sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace. If provided, use a stub
-	 already in userspace. */
-	/* minus 8 is offset to cater for "rtsd r15,8" offset */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* Note, these encodings are _big endian_! */
-
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
-
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
-
-	/* Signal handler args: */
-	regs->r5 = signal; /* Arg 0: signum */
-	regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
-
-	/* Offset of 4 to handle microblaze rtid r14, 0 */
-	regs->pc = (unsigned long)ka->sa.sa_handler;
-
-	set_fs(USER_DS);
-
-#ifdef DEBUG_SIG
-	printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
-		current->comm, current->pid, frame, regs->pc);
-#endif
-
-	return;
-
-give_sigsegv:
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	force_sig(SIGSEGV, current);
+	return (void __user *)((sp - frame_size) & -8UL);
 }
 
 static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			sigset_t *set, struct pt_regs *regs)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 	int signal;
 
@@ -382,7 +306,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		? current_thread_info()->exec_domain->signal_invmap[sig]
 		: sig;
 
-	err |= copy_siginfo_to_user(&frame->info, info);
+	if (info)
+		err |= copy_siginfo_to_user(&frame->info, info);
 
 	/* Create the ucontext. */
 	err |= __put_user(0, &frame->uc.uc_flags);
@@ -463,7 +388,15 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 	case -ERESTARTNOINTR:
 do_restart:
 		/* offset of 4 bytes to re-execute trap (brki) instruction */
+#ifndef CONFIG_MMU
 		regs->pc -= 4;
+#else
+		/* offset of 8 bytes required = 4 for rtbd
+		   offset, plus 4 for size of
+			"brki r14,8"
+		   instruction. */
+		regs->pc -= 8;
+#endif
 		break;
 	}
 }
@@ -480,7 +413,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	if (ka->sa.sa_flags & SA_SIGINFO)
 		setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		setup_frame(sig, ka, oldset, regs);
+		setup_rt_frame(sig, ka, NULL, oldset, regs);
 
 	if (ka->sa.sa_flags & SA_ONESHOT)
 		ka->sa.sa_handler = SIG_DFL;
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 3bb42ec924c..376d1789f7c 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -2,7 +2,11 @@ ENTRY(sys_call_table)
 	.long sys_restart_syscall	/* 0 - old "setup()" system call,
 					 * used for restarting */
 	.long sys_exit
-	.long sys_ni_syscall		/* was fork */
+#ifdef CONFIG_MMU
+	.long sys_fork_wrapper
+#else
+	.long sys_ni_syscall
+#endif
 	.long sys_read
 	.long sys_write
 	.long sys_open			/* 5 */
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index 293ef486013..eaaaf805f31 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -22,14 +22,6 @@ void trap_init(void)
 	__enable_hw_exceptions();
 }
 
-void __bad_xchg(volatile void *ptr, int size)
-{
-	printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
-		__builtin_return_address(0), ptr, size);
-	BUG();
-}
-EXPORT_SYMBOL(__bad_xchg);
-
 static int kstack_depth_to_print = 24;
 
 static int __init kstack_setup(char *s)
@@ -105,3 +97,37 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data)
+{
+	if (data)
+		printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
+			file, line, data);
+	else
+		printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
+
+	machine_halt();
+}
+
+int bad_trap(int trap_num, struct pt_regs *regs)
+{
+	printk(KERN_CRIT
+		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
+		trap_num, regs->pc, current->pid);
+	return -ENOSYS;
+}
+
+int debug_trap(struct pt_regs *regs)
+{
+	int i;
+	printk(KERN_CRIT "debug trap\n");
+	for (i = 0; i < 32; i++) {
+		/* printk("r%i:%08X\t",i,regs->gpr[i]); */
+		if ((i % 4) == 3)
+			printk(KERN_CRIT "\n");
+	}
+	printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
+	return -ENOSYS;
+}
+#endif
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 840385e5129..8ae807ab7a5 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -17,8 +17,7 @@ ENTRY(_start)
 jiffies = jiffies_64 + 4;
 
 SECTIONS {
-	. = CONFIG_KERNEL_BASE_ADDR;
-
+	. = CONFIG_KERNEL_START;
 	.text : {
 		_text = . ;
 		_stext = . ;
@@ -132,6 +131,8 @@ SECTIONS {
 		__con_initcall_end = .;
 	}
 
+	SECURITY_INIT
+
 	__init_end_before_initramfs = .;
 
 	.init.ramfs ALIGN(4096) : {
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index d27126bf306..71c8cb6c9e4 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -10,4 +10,5 @@ else
 lib-y += memcpy.o memmove.o
 endif
 
-lib-y +=  uaccess.o
+lib-$(CONFIG_NO_MMU) += uaccess.o
+lib-$(CONFIG_MMU) += uaccess_old.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
index 809340070a1..f08e7459141 100644
--- a/arch/microblaze/lib/checksum.c
+++ b/arch/microblaze/lib/checksum.c
@@ -32,9 +32,10 @@
 /* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
  kills, so most of the assembly has to go. */
 
-#include <net/checksum.h>
-#include <asm/checksum.h>
 #include <linux/module.h>
+#include <net/checksum.h>
+
+#include <asm/byteorder.h>
 
 static inline unsigned short from32to16(unsigned long x)
 {
@@ -102,6 +103,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph, ihl*4);
 }
+EXPORT_SYMBOL(ip_fast_csum);
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -115,15 +117,16 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
  *
  * it's best to have buff aligned on a 32-bit boundary
  */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
+__wsum csum_partial(const void *buff, int len, __wsum wsum)
 {
+	unsigned int sum = (__force unsigned int)wsum;
 	unsigned int result = do_csum(buff, len);
 
 	/* add in old sum, and carry.. */
 	result += sum;
 	if (sum > result)
 		result += 1;
-	return result;
+	return (__force __wsum)result;
 }
 EXPORT_SYMBOL(csum_partial);
 
@@ -131,9 +134,9 @@ EXPORT_SYMBOL(csum_partial);
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-__sum16 ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
 {
-	return ~do_csum(buff, len);
+	return (__force __sum16)~do_csum(buff, len);
 }
 EXPORT_SYMBOL(ip_compute_csum);
 
@@ -141,12 +144,18 @@ EXPORT_SYMBOL(ip_compute_csum);
  * copy from fs while checksumming, otherwise like csum_partial
  */
 __wsum
-csum_partial_copy_from_user(const char __user *src, char *dst, int len,
-						int sum, int *csum_err)
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+						__wsum sum, int *csum_err)
 {
-	if (csum_err)
+	int missing;
+
+	missing = __copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*csum_err = -EFAULT;
+	} else
 		*csum_err = 0;
-	memcpy(dst, src, len);
+
 	return csum_partial(dst, len, sum);
 }
 EXPORT_SYMBOL(csum_partial_copy_from_user);
@@ -155,7 +164,7 @@ EXPORT_SYMBOL(csum_partial_copy_from_user);
  * copy from ds while checksumming, otherwise like csum_partial
  */
 __wsum
-csum_partial_copy(const char *src, char *dst, int len, int sum)
+csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
 {
 	memcpy(dst, src, len);
 	return csum_partial(dst, len, sum);
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 5880119c448..6a907c58a4b 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -154,8 +154,3 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 }
 EXPORT_SYMBOL(memcpy);
 #endif /* __HAVE_ARCH_MEMCPY */
-
-void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c)
-{
-	return memcpy(d, s, c);
-}
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
new file mode 100644
index 00000000000..67f991c14b8
--- /dev/null
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2007 LynuxWorks, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+
+/*
+ * int __strncpy_user(char *to, char *from, int len);
+ *
+ * Returns:
+ *  -EFAULT  for an exception
+ *  len      if we hit the buffer limit
+ *  bytes copied
+ */
+
+	.text
+.globl __strncpy_user;
+.align 4;
+__strncpy_user:
+
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7 - len
+	 * r3 - temp count
+	 * r4 - temp val
+	 */
+	addik	r3,r7,0		/* temp_count = len */
+	beqi	r3,3f
+1:
+	lbu	r4,r6,r0
+	sb	r4,r5,r0
+
+	addik	r3,r3,-1
+	beqi	r3,2f		/* break on len */
+
+	addik	r5,r5,1
+	bneid	r4,1b
+	addik	r6,r6,1		/* delay slot */
+	addik	r3,r3,1		/* undo "temp_count--" */
+2:
+	rsubk	r3,r3,r7	/* temp_count = len - temp_count */
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	.fixup, "ax"
+	.align	2
+4:
+	brid	3b
+	addik	r3,r0, -EFAULT
+
+	.section	__ex_table, "a"
+	.word	1b,4b
+
+/*
+ * int __strnlen_user(char __user *str, int maxlen);
+ *
+ * Returns:
+ *  0 on error
+ *  maxlen + 1  if no NUL byte found within maxlen bytes
+ *  size of the string (including NUL byte)
+ */
+
+	.text
+.globl __strnlen_user;
+.align 4;
+__strnlen_user:
+	addik	r3,r6,0
+	beqi	r3,3f
+1:
+	lbu	r4,r5,r0
+	beqid	r4,2f		/* break on NUL */
+	addik	r3,r3,-1	/* delay slot */
+
+	bneid	r3,1b
+	addik	r5,r5,1		/* delay slot */
+
+	addik	r3,r3,-1	/* for break on len */
+2:
+	rsubk	r3,r3,r6
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	.fixup,"ax"
+4:
+	brid	3b
+	addk	r3,r0,r0
+
+	.section	__ex_table,"a"
+	.word	1b,4b
+
+/*
+ * int __copy_tofrom_user(char *to, char *from, int len)
+ * Return:
+ *   0 on success
+ *   number of not copied bytes on error
+ */
+	.text
+.globl __copy_tofrom_user;
+.align 4;
+__copy_tofrom_user:
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7, r3 - count
+	 * r4 - tempval
+	 */
+	addik	r3,r7,0
+	beqi	r3,3f
+1:
+	lbu	r4,r6,r0
+	addik	r6,r6,1
+2:
+	sb	r4,r5,r0
+	addik	r3,r3,-1
+	bneid	r3,1b
+	addik	r5,r5,1		/* delay slot */
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	__ex_table,"a"
+	.word	1b,3b,2b,3b
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
index bf9e4479a1f..6c8a924d9e2 100644
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -3,3 +3,5 @@
 #
 
 obj-y := init.o
+
+obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
new file mode 100644
index 00000000000..5e67cd1fab4
--- /dev/null
+++ b/arch/microblaze/mm/fault.c
@@ -0,0 +1,304 @@
+/*
+ *  arch/microblaze/mm/fault.c
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from "arch/ppc/mm/fault.c"
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/i386/mm/fault.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  Modified by Cort Dougan and Paul Mackerras.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <asm/exceptions.h>
+
+#if defined(CONFIG_KGDB)
+int debugger_kernel_faults = 1;
+#endif
+
+static unsigned long pte_misses;	/* updated by do_page_fault() */
+static unsigned long pte_errors;	/* updated by do_page_fault() */
+
+/*
+ * Check whether the instruction at regs->pc is a store using
+ * an update addressing form which will update r1.
+ */
+static int store_updates_sp(struct pt_regs *regs)
+{
+	unsigned int inst;
+
+	if (get_user(inst, (unsigned int *)regs->pc))
+		return 0;
+	/* check for 1 in the rD field */
+	if (((inst >> 21) & 0x1f) != 1)
+		return 0;
+	/* check for store opcodes */
+	if ((inst & 0xd0000000) == 0xd0000000)
+		return 1;
+	return 0;
+}
+
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from do_page_fault above and from some of the procedures
+ * in traps.c.
+ */
+static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+	const struct exception_table_entry *fixup;
+/* MS: no context */
+	/* Are we prepared to handle this fault?  */
+	fixup = search_exception_tables(regs->pc);
+	if (fixup) {
+		regs->pc = fixup->fixup;
+		return;
+	}
+
+	/* kernel has accessed a bad area */
+#if defined(CONFIG_KGDB)
+	if (debugger_kernel_faults)
+		debugger(regs);
+#endif
+	die("kernel access of bad area", regs, sig);
+}
+
+/*
+ * The error_code parameter is ESR for a data fault,
+ * 0 for an instruction fault.
+ */
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	siginfo_t info;
+	int code = SEGV_MAPERR;
+	int is_write = error_code & ESR_S;
+	int fault;
+
+	regs->ear = address;
+	regs->esr = error_code;
+
+	/* On a kernel SLB miss we can only check for a valid exception entry */
+	if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+		printk(KERN_WARNING "kernel task_size exceed");
+		_exception(SIGSEGV, regs, code, address);
+	}
+
+	/* for instr TLB miss and instr storage exception ESR_S is undefined */
+	if ((error_code & 0x13) == 0x13 || (error_code & 0x11) == 0x11)
+		is_write = 0;
+
+#if defined(CONFIG_KGDB)
+	if (debugger_fault_handler && regs->trap == 0x300) {
+		debugger_fault_handler(regs);
+		return;
+	}
+#endif /* CONFIG_KGDB */
+
+	if (in_atomic() || mm == NULL) {
+		/* FIXME */
+		if (kernel_mode(regs)) {
+			printk(KERN_EMERG
+				"Page fault in kernel mode - Oooou!!! pid %d\n",
+				current->pid);
+			_exception(SIGSEGV, regs, code, address);
+			return;
+		}
+		/* in_atomic() in user mode is really bad,
+		   as is current->mm == NULL. */
+		printk(KERN_EMERG "Page fault in user mode with "
+		       "in_atomic(), mm = %p\n", mm);
+		printk(KERN_EMERG "r15 = %lx  MSR = %lx\n",
+		       regs->r15, regs->msr);
+		die("Weird page fault", regs, SIGSEGV);
+	}
+
+	/* When running in the kernel we expect faults to occur only to
+	 * addresses in user space.  All other faults represent errors in the
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
+	 * erroneous fault occurring in a code path which already holds mmap_sem
+	 * we will deadlock attempting to validate the fault against the
+	 * address space.  Luckily the kernel only validly references user
+	 * space from well defined areas of code, which are listed in the
+	 * exceptions table.
+	 *
+	 * As the vast majority of faults will be valid we will only perform
+	 * the source reference check when there is a possibility of a deadlock.
+	 * Attempt to lock the address space, if we cannot we then validate the
+	 * source.  If this is invalid we can skip the address space check,
+	 * thus avoiding the deadlock.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if (kernel_mode(regs) && !search_exception_tables(regs->pc))
+			goto bad_area_nosemaphore;
+
+		down_read(&mm->mmap_sem);
+	}
+
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+
+	if (vma->vm_start <= address)
+		goto good_area;
+
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (!is_write)
+		goto bad_area;
+
+	/*
+	 * N.B. The ABI allows programs to access up to
+	 * a few hundred bytes below the stack pointer (TBD).
+	 * The kernel signal delivery code writes up to about 1.5kB
+	 * below the stack pointer (r1) before decrementing it.
+	 * The exec code can write slightly over 640kB to the stack
+	 * before setting the user r1.  Thus we allow the stack to
+	 * expand to 1MB without further checks.
+	 */
+	if (address + 0x100000 < vma->vm_end) {
+
+		/* get user regs even if this fault is in kernel mode */
+		struct pt_regs *uregs = current->thread.regs;
+		if (uregs == NULL)
+			goto bad_area;
+
+		/*
+		 * A user-mode access to an address a long way below
+		 * the stack pointer is only valid if the instruction
+		 * is one which would update the stack pointer to the
+		 * address accessed if the instruction completed,
+		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+		 * (or the byte, halfword, float or double forms).
+		 *
+		 * If we don't check this then any write to the area
+		 * between the last mapped region and the stack will
+		 * expand the stack rather than segfaulting.
+		 */
+		if (address + 2048 < uregs->r1
+			&& (kernel_mode(regs) || !store_updates_sp(regs)))
+				goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+good_area:
+	code = SEGV_ACCERR;
+
+	/* a write */
+	if (is_write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	/* a read */
+	} else {
+		/* protection fault */
+		if (error_code & 0x08000000)
+			goto bad_area;
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+survive:
+	fault = handle_mm_fault(mm, vma, address, is_write);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		current->maj_flt++;
+	else
+		current->min_flt++;
+	up_read(&mm->mmap_sem);
+	/*
+	 * keep track of tlb+htab misses that are good addrs but
+	 * just need pte's created via handle_mm_fault()
+	 * -- Cort
+	 */
+	pte_misses++;
+	return;
+
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	pte_errors++;
+
+	/* User mode accesses cause a SIGSEGV */
+	if (user_mode(regs)) {
+		_exception(SIGSEGV, regs, code, address);
+/*		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		info.si_code = code;
+		info.si_addr = (void *) address;
+		force_sig_info(SIGSEGV, &info, current);*/
+		return;
+	}
+
+	bad_page_fault(regs, address, SIGSEGV);
+	return;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	if (current->pid == 1) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	up_read(&mm->mmap_sem);
+	printk(KERN_WARNING "VM: killing process %s\n", current->comm);
+	if (user_mode(regs))
+		do_exit(SIGKILL);
+	bad_page_fault(regs, address, SIGKILL);
+	return;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+	if (user_mode(regs)) {
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = BUS_ADRERR;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
+		return;
+	}
+	bad_page_fault(regs, address, SIGBUS);
+}
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b0c8213cd6c..b5a701cd71e 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -23,8 +23,16 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+#ifndef CONFIG_MMU
 unsigned int __page_offset;
-/* EXPORT_SYMBOL(__page_offset); */
+EXPORT_SYMBOL(__page_offset);
+
+#else
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+int mem_init_done;
+static int init_bootmem_done;
+#endif /* CONFIG_MMU */
 
 char *klimit = _end;
 
@@ -32,28 +40,26 @@ char *klimit = _end;
  * Initialize the bootmem system and give it all the memory we
  * have available.
  */
-unsigned int memory_start;
-unsigned int memory_end; /* due to mm/nommu.c */
-unsigned int memory_size;
+unsigned long memory_start;
+unsigned long memory_end; /* due to mm/nommu.c */
+unsigned long memory_size;
 
 /*
  * paging_init() sets up the page tables - in fact we've already done this.
  */
 static void __init paging_init(void)
 {
-	int i;
 	unsigned long zones_size[MAX_NR_ZONES];
 
+	/* Clean every zones */
+	memset(zones_size, 0, sizeof(zones_size));
+
 	/*
 	 * old: we can DMA to/from any address.put all page into ZONE_DMA
 	 * We use only ZONE_NORMAL
 	 */
 	zones_size[ZONE_NORMAL] = max_mapnr;
 
-	/* every other zones are empty */
-	for (i = 1; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
 	free_area_init(zones_size);
 }
 
@@ -61,6 +67,7 @@ void __init setup_memory(void)
 {
 	int i;
 	unsigned long map_size;
+#ifndef CONFIG_MMU
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
@@ -93,6 +100,7 @@ void __init setup_memory(void)
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
 
+#endif
 	/*
 	 * Kernel:
 	 * start: base phys address of kernel - page align
@@ -121,9 +129,13 @@ void __init setup_memory(void)
 	 * for 4GB of memory, using 4kB pages), plus 1 page
 	 * (in case the address isn't page-aligned).
 	 */
+#ifndef CONFIG_MMU
 	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
 					min_low_pfn, max_low_pfn);
-
+#else
+	map_size = init_bootmem_node(&contig_page_data,
+		PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+#endif
 	lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
@@ -137,6 +149,9 @@ void __init setup_memory(void)
 		reserve_bootmem(lmb.reserved.region[i].base,
 			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
+#ifdef CONFIG_MMU
+	init_bootmem_done = 1;
+#endif
 	paging_init();
 }
 
@@ -191,11 +206,145 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
 	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
+#ifdef CONFIG_MMU
+	mem_init_done = 1;
+#endif
 }
 
+#ifndef CONFIG_MMU
 /* Check against bounds of physical memory */
 int ___range_ok(unsigned long addr, unsigned long size)
 {
 	return ((addr < memory_start) ||
 		((addr + size) > memory_end));
 }
+EXPORT_SYMBOL(___range_ok);
+
+#else
+int page_is_ram(unsigned long pfn)
+{
+	return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void mm_cmdline_setup(void)
+{
+	unsigned long maxmem = 0;
+	char *p = cmd_line;
+
+	/* Look for mem= option on command line */
+	p = strstr(cmd_line, "mem=");
+	if (p) {
+		p += 4;
+		maxmem = memparse(p, &p);
+		if (maxmem && memory_size > maxmem) {
+			memory_size = maxmem;
+			memory_end = memory_start + memory_size;
+			lmb.memory.region[0].size = memory_size;
+		}
+	}
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+	/*
+	 * The Zone Protection Register (ZPR) defines how protection will
+	 * be applied to every page which is a member of a given zone. At
+	 * present, we utilize only two of the zones.
+	 * The zone index bits (of ZSEL) in the PTE are used for software
+	 * indicators, except the LSB.  For user access, zone 1 is used,
+	 * for kernel access, zone 0 is used.  We set all but zone 1
+	 * to zero, allowing only kernel access as indicated in the PTE.
+	 * For zone 1, we set a 01 binary (a value of 10 will not work)
+	 * to allow user access as indicated in the PTE.  This also allows
+	 * kernel access as indicated in the PTE.
+	 */
+	__asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+			"mts rzpr, r11;"
+			: : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+	unsigned int kstart, ksize;
+
+	if (!lmb.reserved.cnt) {
+		printk(KERN_EMERG "Error memory count\n");
+		machine_restart(NULL);
+	}
+
+	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+		printk(KERN_EMERG "Memory must be greater than 16MB\n");
+		machine_restart(NULL);
+	}
+	/* Find main memory where the kernel is */
+	memory_start = (u32) lmb.memory.region[0].base;
+	memory_end = (u32) lmb.memory.region[0].base +
+				(u32) lmb.memory.region[0].size;
+	memory_size = memory_end - memory_start;
+
+	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+	/*
+	 * Map out the kernel text/data/bss from the available physical
+	 * memory.
+	 */
+	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+	/* kernel size */
+	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+	lmb_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/* Remove the init RAM disk from the available memory. */
+/*	if (initrd_start) {
+		mem_pieces_remove(&phys_avail, __pa(initrd_start),
+				  initrd_end - initrd_start, 1);
+	}*/
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	/* Initialize the MMU hardware */
+	mmu_init_hw();
+
+	/* Map in all of RAM starting at CONFIG_KERNEL_START */
+	mapin_ram();
+
+#ifdef HIGHMEM_START_BOOL
+	ioremap_base = HIGHMEM_START;
+#else
+	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+	ioremap_bot = ioremap_base;
+
+	/* Initialize the context management stuff */
+	mmu_context_init();
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+	void *p;
+	if (init_bootmem_done) {
+		p = alloc_bootmem_pages(PAGE_SIZE);
+	} else {
+		/*
+		 * Mem start + 32MB -> here is limit
+		 * because of mem mapping from head.S
+		 */
+		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+					memory_start + 0x2000000));
+	}
+	return p;
+}
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/mm/mmu_context.c b/arch/microblaze/mm/mmu_context.c
new file mode 100644
index 00000000000..26ff82f4fa8
--- /dev/null
+++ b/arch/microblaze/mm/mmu_context.c
@@ -0,0 +1,70 @@
+/*
+ * This file contains the routines for handling the MMU.
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from arch/ppc/mm/4xx_mmu.c:
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+	/*
+	 * The use of context zero is reserved for the kernel.
+	 * This code assumes FIRST_CONTEXT < 32.
+	 */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :).  This would be the
+ * place to implement an LRU scheme if anyone were motivated to do it.
+ */
+void steal_context(void)
+{
+	struct mm_struct *mm;
+
+	/* free up context `next_mmu_context' */
+	/* if we shouldn't free context 0, don't... */
+	if (next_mmu_context < FIRST_CONTEXT)
+		next_mmu_context = FIRST_CONTEXT;
+	mm = context_mm[next_mmu_context];
+	flush_tlb_mm(mm);
+	destroy_context(mm);
+}
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
new file mode 100644
index 00000000000..46c4ca5d15c
--- /dev/null
+++ b/arch/microblaze/mm/pgtable.c
@@ -0,0 +1,286 @@
+/*
+ *  This file contains the routines setting up the linux page tables.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from arch/ppc/mm/pgtable.c:
+ *    -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file COPYING in the main directory of this
+ *  archive for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/sections.h>
+
+#define flush_HPTE(X, va, pg)	_tlbie(va)
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+
+/* The maximum lowmem defaults to 768Mb, but this can be configured to
+ * another value.
+ */
+#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
+
+#ifndef CONFIG_SMP
+struct pgtable_cache_struct quicklists;
+#endif
+
+static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
+		unsigned long flags)
+{
+	unsigned long v, i;
+	phys_addr_t p;
+	int err;
+
+	/*
+	 * Choose an address to map it to.
+	 * Once the vmalloc system is running, we use it.
+	 * Before then, we use space going down from ioremap_base
+	 * (ioremap_bot records where we're up to).
+	 */
+	p = addr & PAGE_MASK;
+	size = PAGE_ALIGN(addr + size) - p;
+
+	/*
+	 * Don't allow anybody to remap normal RAM that we're using.
+	 * mem_init() sets high_memory so only do the check after that.
+	 *
+	 * However, allow remap of rootfs: TBD
+	 */
+	if (mem_init_done &&
+		p >= memory_start && p < virt_to_phys(high_memory) &&
+		!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
+		p < virt_to_phys((unsigned long)__bss_stop))) {
+		printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT
+			" is RAM lr %p\n", (unsigned long)p,
+			__builtin_return_address(0));
+		return NULL;
+	}
+
+	if (size == 0)
+		return NULL;
+
+	/*
+	 * Is it already mapped? If the whole area is mapped then we're
+	 * done, otherwise remap it since we want to keep the virt addrs for
+	 * each request contiguous.
+	 *
+	 * We make the assumption here that if the bottom and top
+	 * of the range we want are mapped then it's mapped to the
+	 * same virt address (and this is contiguous).
+	 *  -- Cort
+	 */
+
+	if (mem_init_done) {
+		struct vm_struct *area;
+		area = get_vm_area(size, VM_IOREMAP);
+		if (area == NULL)
+			return NULL;
+		v = VMALLOC_VMADDR(area->addr);
+	} else {
+		v = (ioremap_bot -= size);
+	}
+
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+	if (flags & _PAGE_NO_CACHE)
+		flags |= _PAGE_GUARDED;
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(v + i, p + i, flags);
+	if (err) {
+		if (mem_init_done)
+			vfree((void *)v);
+		return NULL;
+	}
+
+	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void __iomem *ioremap(phys_addr_t addr, unsigned long size)
+{
+	return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+EXPORT_SYMBOL(ioremap);
+
+void iounmap(void *addr)
+{
+	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
+		vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+EXPORT_SYMBOL(iounmap);
+
+
+int map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+	pmd_t *pd;
+	pte_t *pg;
+	int err = -ENOMEM;
+	/* spin_lock(&init_mm.page_table_lock); */
+	/* Use upper 10 bits of VA to index the first level map */
+	pd = pmd_offset(pgd_offset_k(va), va);
+	/* Use middle 10 bits of VA to index the second-level map */
+	pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */
+	/* pg = pte_alloc_kernel(&init_mm, pd, va); */
+
+	if (pg != NULL) {
+		err = 0;
+		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
+				__pgprot(flags)));
+		if (mem_init_done)
+			flush_HPTE(0, va, pmd_val(*pd));
+			/* flush_HPTE(0, va, pg); */
+
+	}
+	/* spin_unlock(&init_mm.page_table_lock); */
+	return err;
+}
+
+void __init adjust_total_lowmem(void)
+{
+/* TBD */
+#if 0
+	unsigned long max_low_mem = MAX_LOW_MEM;
+
+	if (total_lowmem > max_low_mem) {
+		total_lowmem = max_low_mem;
+#ifndef CONFIG_HIGHMEM
+		printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
+				"CONFIG_HIGHMEM to reach %ld Mb\n",
+				max_low_mem >> 20, total_memory >> 20);
+		total_memory = total_lowmem;
+#endif /* CONFIG_HIGHMEM */
+	}
+#endif
+}
+
+static void show_tmem(unsigned long tmem)
+{
+	volatile unsigned long a;
+	a = a + tmem;
+}
+
+/*
+ * Map in all of physical memory starting at CONFIG_KERNEL_START.
+ */
+void __init mapin_ram(void)
+{
+	unsigned long v, p, s, f;
+
+	v = CONFIG_KERNEL_START;
+	p = memory_start;
+	show_tmem(memory_size);
+	for (s = 0; s < memory_size; s += PAGE_SIZE) {
+		f = _PAGE_PRESENT | _PAGE_ACCESSED |
+				_PAGE_SHARED | _PAGE_HWEXEC;
+		if ((char *) v < _stext || (char *) v >= _etext)
+			f |= _PAGE_WRENABLE;
+		else
+			/* On the MicroBlaze, no user access
+			   forces R/W kernel access */
+			f |= _PAGE_USER;
+		map_page(v, p, f);
+		v += PAGE_SIZE;
+		p += PAGE_SIZE;
+	}
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x)	((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/*
+ * Set up a mapping for a block of I/O.
+ * virt, phys, size must all be page-aligned.
+ * This should only be called before ioremap is called.
+ */
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags)
+{
+	int i;
+
+	if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
+		ioremap_bot = ioremap_base = virt;
+
+	/* Put it in the page tables. */
+	for (i = 0; i < size; i += PAGE_SIZE)
+		map_page(virt + i, phys + i, flags);
+}
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise.  The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+	pgd_t	*pgd;
+	pmd_t	*pmd;
+	pte_t	*pte;
+	int     retval = 0;
+
+	pgd = pgd_offset(mm, addr & PAGE_MASK);
+	if (pgd) {
+		pmd = pmd_offset(pgd, addr & PAGE_MASK);
+		if (pmd_present(*pmd)) {
+			pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
+			if (pte) {
+				retval = 1;
+				*ptep = pte;
+			}
+		}
+	}
+	return retval;
+}
+
+/* Find physical address for this virtual address.  Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+	unsigned long pa;
+
+	pte_t *pte;
+	struct mm_struct *mm;
+
+	/* Allow mapping of user addresses (within the thread)
+	 * for DMA if necessary.
+	 */
+	if (addr < TASK_SIZE)
+		mm = current->mm;
+	else
+		mm = &init_mm;
+
+	pa = 0;
+	if (get_pteptr(mm, addr, &pte))
+		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+
+	return pa;
+}
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 783da855a2e..d6d35b2e5fe 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-CONFIG_SENSORS_MAX6875=y
+CONFIG_EEPROM_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 8426d3b9501..fadb351d249 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 1b332e15ab5..eb7f01cfd1a 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -793,6 +793,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 #define smp_mb__before_atomic_inc()	smp_llsc_mb()
 #define smp_mb__after_atomic_inc()	smp_llsc_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* _ASM_ATOMIC_H */
diff --git a/arch/mips/include/asm/bitsperlong.h b/arch/mips/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..3e4c10a8e78
--- /dev/null
+++ b/arch/mips/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MIPS_BITSPERLONG_H
+#define __ASM_MIPS_BITSPERLONG_H
+
+#define __BITS_PER_LONG _MIPS_SZLONG
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_MIPS_BITSPERLONG_H */
diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h
index 3c0d840e457..a0efc73819e 100644
--- a/arch/mips/include/asm/errno.h
+++ b/arch/mips/include/asm/errno.h
@@ -119,6 +119,8 @@
 #define	EOWNERDEAD	165	/* Owner died */
 #define	ENOTRECOVERABLE	166	/* State not recoverable */
 
+#define	ERFKILL		167	/* Operation not possible due to RF-kill */
+
 #define EDQUOT		1133	/* Quota exceeded */
 
 #ifdef __KERNEL__
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 9f946e4ca05..72c80d2034c 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -189,6 +189,6 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 #define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_PAGE_H */
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
index bee5153aca4..c783f364938 100644
--- a/arch/mips/include/asm/signal.h
+++ b/arch/mips/include/asm/signal.h
@@ -109,7 +109,7 @@ typedef unsigned long old_sigset_t;		/* at least 32 bits */
 #define SIG_UNBLOCK	2	/* for unblocking signals */
 #define SIG_SETMASK	3	/* for setting the signal mask */
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 struct sigaction {
 	unsigned int	sa_flags;
diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
deleted file mode 100644
index 2562f8f9be0..00000000000
--- a/arch/mips/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SUSPEND_H
-#define __ASM_SUSPEND_H
-
-/* Somewhen...  Maybe :-)  */
-
-#endif /* __ASM_SUSPEND_H */
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
index 7956e69a3bd..544a2854598 100644
--- a/arch/mips/include/asm/types.h
+++ b/arch/mips/include/asm/types.h
@@ -31,9 +31,6 @@ typedef unsigned short umode_t;
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
-#define BITS_PER_LONG _MIPS_SZLONG
-
 #ifndef __ASSEMBLY__
 
 #if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 1f60e27523d..3e9100dcc12 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -68,8 +68,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
index bc064825f9b..5bf5be9566d 100644
--- a/arch/mn10300/include/asm/atomic.h
+++ b/arch/mn10300/include/asm/atomic.h
@@ -151,7 +151,7 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_ATOMIC_H */
diff --git a/arch/mn10300/include/asm/bitsperlong.h b/arch/mn10300/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/mn10300/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
index b7986b65add..d04fac1da5a 100644
--- a/arch/mn10300/include/asm/mman.h
+++ b/arch/mn10300/include/asm/mman.h
@@ -12,7 +12,7 @@
 #ifndef _ASM_MMAN_H
 #define _ASM_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 921942ed1b0..1b0ba5e182b 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -77,8 +77,6 @@ struct pt_regs {
 };
 #endif
 
-extern struct pt_regs *__frame; /* current frame pointer */
-
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
@@ -90,6 +88,8 @@ extern struct pt_regs *__frame; /* current frame pointer */
 
 #if defined(__KERNEL__)
 
+extern struct pt_regs *__frame;		/* current frame pointer */
+
 #if !defined(__ASSEMBLY__)
 struct task_struct;
 
@@ -107,5 +107,4 @@ extern void user_disable_single_step(struct task_struct *);
 #define profile_pc(regs) ((regs)->pc)
 
 #endif  /*  __KERNEL__  */
-
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
index 08356c83228..c229d1e3f99 100644
--- a/arch/mn10300/include/asm/setup.h
+++ b/arch/mn10300/include/asm/setup.h
@@ -11,7 +11,8 @@
 #ifndef _ASM_SETUP_H
 #define _ASM_SETUP_H
 
+#ifdef __KERNEL__
 extern void __init unit_setup(void);
 extern void __init unit_init_IRQ(void);
-
+#endif
 #endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
index e98817cec5f..7e891fce237 100644
--- a/arch/mn10300/include/asm/signal.h
+++ b/arch/mn10300/include/asm/signal.h
@@ -115,7 +115,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 6b287f2e8e8..4fa0e3648d8 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -48,8 +48,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	 * table entries. */
 }
 
 /*
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index ada3e5364d8..7eeaff94436 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -338,6 +338,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #endif /* CONFIG_64BIT */
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* _ASM_PARISC_ATOMIC_H_ */
diff --git a/arch/parisc/include/asm/bitsperlong.h b/arch/parisc/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..75196b415d3
--- /dev/null
+++ b/arch/parisc/include/asm/bitsperlong.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_PARISC_BITSPERLONG_H
+#define __ASM_PARISC_BITSPERLONG_H
+
+/*
+ * using CONFIG_* outside of __KERNEL__ is wrong,
+ * __LP64__ was also removed from headers, so what
+ * is the right approach on parisc?
+ *	-arnd
+ */
+#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__)
+#define __BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
+#else
+#define __BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_PARISC_BITSPERLONG_H */
diff --git a/arch/parisc/include/asm/errno.h b/arch/parisc/include/asm/errno.h
index e2f3ddc796b..9992abdd782 100644
--- a/arch/parisc/include/asm/errno.h
+++ b/arch/parisc/include/asm/errno.h
@@ -120,5 +120,6 @@
 #define EOWNERDEAD	254	/* Owner died */
 #define ENOTRECOVERABLE	255	/* State not recoverable */
 
+#define	ERFKILL		256	/* Operation not possible due to RF-kill */
 
 #endif
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 7bc5125d7d4..a84cc1f925f 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -159,6 +159,6 @@ extern int npmem_ranges;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _PARISC_PAGE_H */
diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h
index 7f5a39bfb4c..20135cc8003 100644
--- a/arch/parisc/include/asm/types.h
+++ b/arch/parisc/include/asm/types.h
@@ -14,14 +14,6 @@ typedef unsigned short umode_t;
  */
 #ifdef __KERNEL__
 
-#ifdef CONFIG_64BIT
-#define BITS_PER_LONG 64
-#define SHIFT_PER_LONG 6
-#else
-#define BITS_PER_LONG 32
-#define SHIFT_PER_LONG 5
-#endif
-
 #ifndef __ASSEMBLY__
 
 /* Dma addresses are 32-bits wide.  */
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index cd4c0b2a8e7..7cf799d70b4 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -7,7 +7,7 @@
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/cache.h>
-#include <asm-generic/uaccess.h>
+#include <asm-generic/uaccess-unaligned.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index ecd1c502444..ef5caf2e6ed 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -267,8 +267,6 @@ void module_free(struct module *mod, void *module_region)
 	mod->arch.section = NULL;
 
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* Additional bytes needed in front of individual sections */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cdc9a6ff4be..9fb344d5a86 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,10 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	bool
+	default y
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
@@ -89,10 +93,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y
 
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
@@ -125,6 +125,7 @@ config PPC
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
+	select GENERIC_ATOMIC64 if PPC32
 
 config EARLY_PRINTK
 	bool
@@ -296,9 +297,19 @@ config IOMMU_VMERGE
 config IOMMU_HELPER
 	def_bool PPC64
 
+config SWIOTLB
+	bool "SWIOTLB support"
+	default n
+	select IOMMU_HELPER
+	---help---
+	  Support for IO bounce buffering for systems without an IOMMU.
+	  This allows us to DMA to the full physical address space on
+	  platforms where the size of a physical address is larger
+	  than the bus address.  Not all platforms support this.
+
 config PPC_NEED_DMA_SYNC_OPS
 	def_bool y
-	depends on NOT_COHERENT_CACHE
+	depends on (NOT_COHERENT_CACHE || SWIOTLB)
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index a1098e23221..d79a902d155 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,6 +41,19 @@ config HCALL_STATS
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
+config PPC_EMULATED_STATS
+	bool "Emulated instructions tracking"
+	depends on DEBUG_FS
+	help
+	  Adds code to keep track of the number of instructions that are
+	  emulated by the in-kernel emulator. Counters for the various classes
+	  of emulated instructions are available under
+	  powerpc/emulated_instructions/ in the root of the debugfs file
+	  system. Optionally (controlled by
+	  powerpc/emulated_instructions/do_warn in debugfs), rate-limited
+	  warnings can be printed to the console when instructions are
+	  emulated.
+
 config CODE_PATCHING_SELFTEST
 	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 551fc58c05c..bc35f4e2b81 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -142,6 +142,7 @@ head-$(CONFIG_FSL_BOOKE)	:= arch/powerpc/kernel/head_fsl_booke.o
 
 head-$(CONFIG_PPC64)		+= arch/powerpc/kernel/entry_64.o
 head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
+head-$(CONFIG_ALTIVEC)		+= arch/powerpc/kernel/vector.o
 
 core-y				+= arch/powerpc/kernel/ \
 				   arch/powerpc/mm/ \
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 53a7a625590..910944edd88 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -164,9 +164,21 @@
 		device_type = "soc";
 		compatible = "fsl,mpc8641-soc", "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
-		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <33333333>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c1: i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 1569117e5dd..0f4c9ec2c3a 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -163,9 +163,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
-		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <33333333>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c1: i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 6582dbd36da..217f8aa6672 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -128,9 +128,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
-		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <33333333>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c1: i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index c9cfd374bff..bdb7fc0fa33 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -56,6 +56,19 @@
 		ranges = <0x00000000 0xfdf00000 0x00100000>;
 		bus-frequency = <0>;				/* Fixed by bootwrapper */
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 57c595bf107..436c9c671dd 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -249,6 +249,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
 			#address-cells = <1>;
@@ -369,7 +371,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x11 AD17 */
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 4319bd70a58..9a0952f74b8 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -221,6 +221,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
@@ -327,7 +329,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 AD16 (USB) */
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 1ae38f0ddef..e3eeaeda918 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -278,7 +278,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 - SATA */
@@ -301,7 +300,6 @@
 	};
 
 	pci1: pci@e0008600 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x0E - MiniPCI Slot */
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 662abe1fb80..eb732115f01 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -227,7 +227,6 @@
 	};
 
 	pci0: pci@e0008600 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x0F - PCI Slot */
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index d9f0a2325fa..a2553a6f900 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -286,7 +286,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -348,7 +347,6 @@
 	};
 
 	pci1: pci@e0008600 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 6e34f170fa6..39ff4c829ca 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -289,6 +289,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
@@ -410,7 +412,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 37b789510d6..6315d6fcc58 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -198,6 +198,8 @@
 			clock-frequency = <0>;
 			bus-frequency = <0>;
 			brg-frequency = <0>;
+			fsl,qe-num-riscs = <2>;
+			fsl,qe-num-snums = <28>;
 
 			muram@10000 {
 				#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 963708017e6..67bb372c945 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -383,7 +383,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 651ff2f9db2..a955a577db8 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -367,7 +367,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d6f208b8297..d266ddbfc28 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -397,7 +397,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index b31c5041350..e781ad2f1f8 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -51,9 +51,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8536-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -321,7 +333,6 @@
 	};
 
 	pci0: pci@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
@@ -346,7 +357,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -383,7 +393,6 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -420,7 +429,6 @@
 	};
 
 	pci3: pcie@ffe0b000 {
-		cell-index = <3>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index ddd67be10b0..9dc292962a9 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -258,7 +270,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index e45097f44fb..9a3ad311aed 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8541-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -272,7 +284,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -344,7 +355,6 @@
 	};
 
 	pci1: pci@e0009000 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7c6932be019..98e94b46566 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -57,9 +57,21 @@
 		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8544-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -274,7 +286,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
@@ -306,7 +317,6 @@
 	};
 
 	pci1: pcie@e0009000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -343,7 +353,6 @@
 	};
 
 	pci2: pcie@e000a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -380,7 +389,6 @@
 	};
 
 	pci3: pcie@e000b000 {
-		cell-index = <3>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 804e9035329..475be1433fe 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -60,9 +60,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -328,7 +340,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x4 (PCIX Slot 2) */
@@ -478,7 +489,6 @@
 	};
 
 	pci1: pci@e0009000 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -503,7 +513,6 @@
 	};
 
 	pci2: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 9484f0729b1..065b2f093de 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8555-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -272,7 +284,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -344,7 +355,6 @@
 	};
 
 	pci1: pci@e0009000 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index cc2acf87d02..a5bb1ec70a5 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -291,7 +303,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9d52e3b2504..00c2bbda701 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -26,6 +26,7 @@
 		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
+		rapidio0 = &rio0;
 	};
 
 	cpus {
@@ -62,9 +63,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8568-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -275,6 +288,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		par_io@e0100 {
 			reg = <0xe0100 0x100>;
 			device_type = "par_io";
@@ -349,6 +378,8 @@
 		reg = <0xe0080000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
@@ -459,7 +490,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x12 AD18 */
@@ -490,7 +520,6 @@
 
 	/* PCI Express */
 	pci1: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -526,4 +555,20 @@
 				  0x0 0x800000>;
 		};
 	};
+
+	rio0: rapidio@e00c00000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
+		reg = <0xe00c0000 0x20000>;
+		ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
+		interrupts = <48 2 /* error     */
+			      49 2 /* bell_outb */
+			      50 2 /* bell_inb  */
+			      53 2 /* msg1_tx   */
+			      54 2 /* msg1_rx   */
+			      55 2 /* msg2_tx   */
+			      56 2 /* msg2_rx   */>;
+		interrupt-parent = <&mpic>;
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
new file mode 100644
index 00000000000..39c2927503c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -0,0 +1,583 @@
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8569EMDS";
+	compatible = "fsl,MPC8569EMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci1 = &pci1;
+		rapidio0 = &rio0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8569@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x3 0x0 0xfc000000 0x00008000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+			compatible = "fsl,mpc8569mds-bcsr";
+			reg = <1 0 0x8000>;
+		};
+
+		nand@3,0 {
+			compatible = "fsl,mpc8569-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <3 0 0x8000>;
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8569-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8569-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8569-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x8>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8569-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x100>;
+			ranges = <0x0 0xe0100 0x100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			qe_pio_e: gpio-controller@80 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x80 0x18>;
+				gpio-controller;
+			};
+
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x0  0x1  0x0  0x3  0x0	/* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x1  0x1  0x0  0x3  0x0	/* ENET1_TXD1_SER1_TXD1 */
+					0x0  0x2  0x1  0x0  0x1  0x0	/* ENET1_TXD2_SER1_TXD2 */
+					0x0  0x3  0x1  0x0  0x2  0x0	/* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x3  0x0	/* ENET1_RXD0_SER1_RXD0	*/
+					0x0  0x7  0x2  0x0  0x1  0x0	/* ENET1_RXD1_SER1_RXD1	*/
+					0x0  0x8  0x2  0x0  0x2  0x0	/* ENET1_RXD2_SER1_RXD2	*/
+					0x0  0x9  0x2  0x0  0x2  0x0	/* ENET1_RXD3_SER1_RXD3	*/
+					0x0  0x4  0x1  0x0  0x2  0x0	/* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xc  0x2  0x0  0x3  0x0	/* ENET1_RX_DV_SER1_CTS_B */
+					0x2  0x8  0x2  0x0  0x1  0x0	/* ENET1_GRXCLK	*/
+					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x0  0xe  0x1  0x0  0x2  0x0	/* ENET2_TXD0_SER2_TXD0 */
+					0x0  0xf  0x1  0x0  0x2  0x0	/* ENET2_TXD1_SER2_TXD1 */
+					0x0  0x10 0x1  0x0  0x1  0x0	/* ENET2_TXD2_SER2_TXD2 */
+					0x0  0x11 0x1  0x0  0x1  0x0	/* ENET2_TXD3_SER2_TXD3 */
+					0x0  0x14 0x2  0x0  0x2  0x0	/* ENET2_RXD0_SER2_RXD0	*/
+					0x0  0x15 0x2  0x0  0x1  0x0	/* ENET2_RXD1_SER2_RXD1	*/
+					0x0  0x16 0x2  0x0  0x1  0x0	/* ENET2_RXD2_SER2_RXD2	*/
+					0x0  0x17 0x2  0x0  0x1  0x0	/* ENET2_RXD3_SER2_RXD3	*/
+					0x0  0x12 0x1  0x0  0x2  0x0	/* ENET2_TX_EN_SER2_RTS_B */
+					0x0  0x1a 0x2  0x0  0x3  0x0	/* ENET2_RX_DV_SER2_CTS_B */
+					0x2  0x3  0x2  0x0  0x1  0x0	/* ENET2_GRXCLK	*/
+					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
+			};
+
+			pio3: ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x1d 0x1  0x0  0x2  0x0	/* ENET3_TXD0_SER3_TXD0 */
+					0x0  0x1e 0x1  0x0  0x3  0x0	/* ENET3_TXD1_SER3_TXD1 */
+					0x0  0x1f 0x1  0x0  0x2  0x0	/* ENET3_TXD2_SER3_TXD2 */
+					0x1  0x0  0x1  0x0  0x3  0x0	/* ENET3_TXD3_SER3_TXD3 */
+					0x1  0x3  0x2  0x0  0x3  0x0	/* ENET3_RXD0_SER3_RXD0	*/
+					0x1  0x4  0x2  0x0  0x1  0x0	/* ENET3_RXD1_SER3_RXD1	*/
+					0x1  0x5  0x2  0x0  0x2  0x0	/* ENET3_RXD2_SER3_RXD2	*/
+					0x1  0x6  0x2  0x0  0x3  0x0	/* ENET3_RXD3_SER3_RXD3	*/
+					0x1  0x1  0x1  0x0  0x1  0x0	/* ENET3_TX_EN_SER3_RTS_B */
+					0x1  0x9  0x2  0x0  0x3  0x0	/* ENET3_RX_DV_SER3_CTS_B */
+					0x2  0x9  0x2  0x0  0x2  0x0	/* ENET3_GRXCLK	*/
+					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
+			};
+
+			pio4: ucc_pin@04 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x1  0xc  0x1  0x0  0x2  0x0	/* ENET4_TXD0_SER4_TXD0 */
+					0x1  0xd  0x1  0x0  0x2  0x0	/* ENET4_TXD1_SER4_TXD1 */
+					0x1  0xe  0x1  0x0  0x1  0x0	/* ENET4_TXD2_SER4_TXD2 */
+					0x1  0xf  0x1  0x0  0x2  0x0	/* ENET4_TXD3_SER4_TXD3 */
+					0x1  0x12 0x2  0x0  0x2  0x0	/* ENET4_RXD0_SER4_RXD0	*/
+					0x1  0x13 0x2  0x0  0x1  0x0	/* ENET4_RXD1_SER4_RXD1	*/
+					0x1  0x14 0x2  0x0  0x1  0x0	/* ENET4_RXD2_SER4_RXD2	*/
+					0x1  0x15 0x2  0x0  0x2  0x0	/* ENET4_RXD3_SER4_RXD3	*/
+					0x1  0x10 0x1  0x0  0x2  0x0	/* ENET4_TX_EN_SER4_RTS_B */
+					0x1  0x18 0x2  0x0  0x3  0x0	/* ENET4_RX_DV_SER4_CTS_B */
+					0x2  0x11 0x2  0x0  0x2  0x0	/* ENET4_GRXCLK	*/
+					0x2  0x18 0x1  0x0  0x2  0x0>;	/* ENET4_GTXCLK	*/
+			};
+		};
+	};
+
+	qe@e0080000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0080000 0x40000>;
+		reg = <0xe0080000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <4>;
+		fsl,qe-num-snums = <46>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <46 2 46 2>; //high:30 low:30
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@4c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+			reg = <0x4c0 0x40>;
+			cell-index = <0>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			gpios = <&qe_pio_e 30 0>;
+			mode = "cpu-qe";
+
+			serial-flash@0 {
+				compatible = "stm,m25p40";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+			};
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		enet0: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@07 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x7>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@01 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy2: ethernet-phy@02 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy3: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet2: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio3>;
+			phy-handle = <&qe_phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <4>;
+			reg = <0x3200 0x200>;
+			interrupts = <35>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio4>;
+			phy-handle = <&qe_phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x20000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x20000>;
+			};
+		};
+
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+		clock-frequency = <33333333>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+
+	rio0: rapidio@e00c00000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
+		reg = <0xe00c0000 0x20000>;
+		ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
+		interrupts = <48 2 /* error     */
+			      49 2 /* bell_outb */
+			      50 2 /* bell_inb  */
+			      53 2 /* msg1_tx   */
+			      54 2 /* msg1_rx   */
+			      55 2 /* msg2_tx   */
+			      56 2 /* msg2_rx   */>;
+		interrupt-parent = <&mpic>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 6e79a416908..cafc1285c14 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -182,9 +182,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0 0xffe00000 0x100000>;
-		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -514,7 +526,6 @@
 	};
 
 	pci0: pcie@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -724,7 +735,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -761,7 +771,6 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index dbd81a76474..f6365db3b97 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -182,9 +182,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xf 0xffe00000 0x100000>;
-		reg = <0xf 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -514,7 +526,6 @@
 	};
 
 	pci0: pcie@fffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -522,7 +533,7 @@
 		#address-cells = <3>;
 		reg = <0xf 0xffe08000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x00000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
@@ -649,8 +660,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
@@ -660,8 +671,8 @@
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				#size-cells = <2>;
 				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0xc0000000
-					  0x2000000 0x0 0xc0000000
+				ranges = <0x2000000 0x0 0xe0000000
+					  0x2000000 0x0 0xe0000000
 					  0x0 0x20000000
 
 					  0x1000000 0x0 0x0
@@ -724,7 +735,6 @@
 	};
 
 	pci1: pcie@fffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -732,7 +742,7 @@
 		#address-cells = <3>;
 		reg = <0xf 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
@@ -750,8 +760,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
@@ -761,7 +771,6 @@
 	};
 
 	pci2: pcie@fffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -769,7 +778,7 @@
 		#address-cells = <3>;
 		reg = <0xf 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
@@ -787,8 +796,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 2bc0c718965..5bd1011fde9 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -59,9 +59,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -238,7 +250,6 @@
 	};
 
 	pci0: pcie@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -448,7 +459,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 159cb3a875f..0efc3456e29 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -58,7 +58,6 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		L2: l2-cache-controller@20000 {
@@ -196,7 +195,6 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1bd3ebe1143..cfc2c60d1f5 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -112,9 +112,21 @@
 		device_type = "soc";
 		compatible = "fsl,mpc8610-immr", "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8610-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -316,7 +328,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8610-pci";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -346,7 +357,6 @@
 	};
 
 	pci1: pcie@e000a000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index d72beb19246..848320e4d3c 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -114,9 +114,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xffe00000 0x00100000>;
-		reg = <0xffe00000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -357,7 +369,6 @@
 	};
 
 	pci0: pcie@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -566,7 +577,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
new file mode 100644
index 00000000000..8be8e701e1d
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -0,0 +1,609 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "fsl,mpc8641hpcn";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;	// 1G at 0x0
+	};
+
+	localbus@fffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <0x0f 0xffe05000 0x0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 0xf 0xef800000 0x00800000
+			  2 0 0xf 0xffdf8000 0x00008000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00300000>;
+			};
+			partition@300000 {
+				label = "firmware b";
+				reg = <0x00300000 0x00100000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00400000 0x00300000>;
+			};
+			partition@700000 {
+				label = "firmware a";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+		};
+	};
+
+	soc8641@fffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
+		bus-frequency = <0>;
+
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <1>;
+					device_type = "ethernet-phy";
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <2>;
+					device_type = "ethernet-phy";
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <28 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8641-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@fffe08000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x0f 0xffe08000 0x0 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0 0 1 &mpic 2 1
+			0x8800 0 0 2 &mpic 3 1
+			0x8800 0 0 3 &mpic 4 1
+			0x8800 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0 0 1 &mpic 2 1
+			0x8900 0 0 2 &mpic 3 1
+			0x8900 0 0 3 &mpic 4 1
+			0x8900 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0 0 1 &mpic 2 1
+			0x8a00 0 0 2 &mpic 3 1
+			0x8a00 0 0 3 &mpic 4 1
+			0x8a00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0 0 1 &mpic 2 1
+			0x8b00 0 0 2 &mpic 3 1
+			0x8b00 0 0 3 &mpic 4 1
+			0x8b00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0 0 1 &mpic 2 1
+			0x8c00 0 0 2 &mpic 3 1
+			0x8c00 0 0 3 &mpic 4 1
+			0x8c00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0 0 1 &mpic 2 1
+			0x8d00 0 0 2 &mpic 3 1
+			0x8d00 0 0 3 &mpic 4 1
+			0x8d00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0 0 1 &mpic 2 1
+			0x8e00 0 0 2 &mpic 3 1
+			0x8e00 0 0 3 &mpic 4 1
+			0x8e00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0 0 1 &mpic 2 1
+			0x8f00 0 0 2 &mpic 3 1
+			0x8f00 0 0 3 &mpic 4 1
+			0x8f00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0 0 1 &mpic 3 1
+			0x9000 0 0 2 &mpic 4 1
+			0x9000 0 0 3 &mpic 1 1
+			0x9000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0 0 1 &mpic 3 1
+			0x9100 0 0 2 &mpic 4 1
+			0x9100 0 0 3 &mpic 1 1
+			0x9100 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0 0 1 &mpic 3 1
+			0x9200 0 0 2 &mpic 4 1
+			0x9200 0 0 3 &mpic 1 1
+			0x9200 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0 0 1 &mpic 3 1
+			0x9300 0 0 2 &mpic 4 1
+			0x9300 0 0 3 &mpic 1 1
+			0x9300 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0 0 1 &mpic 3 1
+			0x9400 0 0 2 &mpic 4 1
+			0x9400 0 0 3 &mpic 1 1
+			0x9400 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0 0 1 &mpic 3 1
+			0x9500 0 0 2 &mpic 4 1
+			0x9500 0 0 3 &mpic 1 1
+			0x9500 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0 0 1 &mpic 3 1
+			0x9600 0 0 2 &mpic 4 1
+			0x9600 0 0 3 &mpic 1 1
+			0x9600 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0 0 1 &mpic 3 1
+			0x9700 0 0 2 &mpic 4 1
+			0x9700 0 0 3 &mpic 1 1
+			0x9700 0 0 4 &mpic 2 1
+
+			// IDSEL 0x1c  USB
+			0xe000 0 0 1 &i8259 12 2
+			0xe100 0 0 2 &i8259 9 2
+			0xe200 0 0 3 &i8259 10 2
+			0xe300 0 0 4 &i8259 11 2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0 0 1 &i8259 6 2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0 0 1 &i8259 7 2
+			0xf100 0 0 1 &i8259 7 2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0 0 1 &i8259 14 2
+			0xf900 0 0 1 &i8259 5 2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x02000000 0x0 0xe0000000
+					  0x02000000 0x0 0xe0000000
+					  0x0 0x20000000
+					  0x01000000 0x0 0x00000000
+					  0x01000000 0x0 0x00000000
+					  0x0 0x00010000>;
+				isa@1e {
+					device_type = "isa";
+					#interrupt-cells = <2>;
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <1 0x20 2
+						       1 0xa0 2
+						       1 0x4d0 2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <9 2>;
+						interrupt-parent = <&mpic>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <1 0x60 1 1 0x64 1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent =
+							<&i8259>;
+
+						keyboard@0 {
+							reg = <0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible =
+							"pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+
+					gpio@400 {
+						reg = <1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci1: pcie@fffe09000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x0f 0xffe09000 0x0 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 4 1
+			0x0000 0 0 2 &mpic 5 1
+			0x0000 0 0 3 &mpic 6 1
+			0x0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
new file mode 100644
index 00000000000..11019142813
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -0,0 +1,704 @@
+/*
+ * P2020 DS Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			ramdisk@0 {
+				reg = <0x0 0x03000000>;
+				read-only;
+			};
+
+			diagnostic@3000000 {
+				reg = <0x03000000 0x00e00000>;
+				read-only;
+			};
+
+			dink@3e00000 {
+				reg = <0x03e00000 0x00200000>;
+				read-only;
+			};
+
+			kernel@4000000 {
+				reg = <0x04000000 0x00400000>;
+				read-only;
+			};
+
+			jffs2@4400000 {
+				reg = <0x04400000 0x03b00000>;
+			};
+
+			dtb@7f00000 {
+				reg = <0x07f00000 0x00080000>;
+				read-only;
+			};
+
+			u-boot@7f80000 {
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			u-boot@0 {
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			jffs2@2000000 {
+				reg = <0x02000000 0x10000000>;
+			};
+
+			ramdisk@12000000 {
+				reg = <0x12000000 0x08000000>;
+				read-only;
+			};
+
+			kernel@1a000000 {
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			dtb@1e000000 {
+				reg = <0x1e000000 0x01000000>;
+				read-only;
+			};
+
+			empty@1f000000 {
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		nand@4,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x4 0x0 0x40000>;
+		};
+
+		nand@5,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x5 0x0 0x40000>;
+		};
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0 0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2, 512k
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe08000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			uli1575@0 {
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x2000000 0x0 0xa0000000
+					  0x2000000 0x0 0xa0000000
+					  0x0 0x20000000
+
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x10000>;
+				isa@1e {
+					device_type = "isa";
+					#interrupt-cells = <2>;
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0 0x1000000 0x0 0x0
+						  0x1000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <4 1>;
+						interrupt-parent = <&mpic>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent =
+							<&i8259>;
+
+						keyboard@0 {
+							reg = <0x0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <0x1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <0x1 0x70 0x2>;
+					};
+
+					gpio@400 {
+						reg = <0x1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index a36dbbc4869..5fb6f6684b0 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -278,7 +278,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b1f1416ac99..9eefe00ed25 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -151,10 +151,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x00000000 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 		compatible = "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -350,7 +362,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x01 (PCI-X slot) @66MHz */
@@ -380,7 +391,6 @@
 	};
 
 	pci2: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index c4564b81e47..239d57a55cf 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -57,9 +57,21 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xff700000 0x00100000>;
-		reg = <0xff700000 0x00100000>;
 		clock-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8560-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -296,7 +308,6 @@
 	};
 
 	pci0: pci@ff708000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index e3e914e78ca..ee5538feb45 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -126,9 +126,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf8000000 0x00100000>;
-		reg = <0xf8000000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -371,7 +383,6 @@
 	};
 
 	pci0: pcie@f8008000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -410,7 +421,6 @@
 	};
 
 	pci1: pcie@f8009000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 43cc68bd319..739dd0da241 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -199,6 +199,28 @@
 					};
 				};
 
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00084000>;
+						};
+						partition@84000 {
+							label = "user";
+							reg = <0x00000000 0x01f7c000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 7a6ae75a1e5..feb4ef6bd14 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -55,10 +55,22 @@
 		device_type = "soc";
 
 		ranges = <0x00000000 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled in by U-Boot
 		compatible = "fsl,mpc8544-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8544-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -314,7 +326,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index ea6b15152de..b670d03fbcd 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -52,10 +52,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0 0xfdf00000 0x100000>;
-		reg = <0xfdf00000 0x1000>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -251,7 +263,6 @@
 	};
 
 	pci0: pci@fdf08000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index b6f1fc6eb96..71347537b83 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -54,10 +54,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8540-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -266,7 +278,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index fa6a3d54a8a..b30f63753d4 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -53,10 +53,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8541-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -288,7 +300,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 00f7ed7a245..61f25e15fd6 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -55,10 +55,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xa0000000 0x100000>;
-		reg = <0xa0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8548-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -419,7 +431,6 @@
 	};
 
 	pci0: pci@a0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -441,7 +452,6 @@
 	};
 
 	pci1: pcie@a000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 (PEX) */
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 673e4a778ac..025759c7c95 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -55,10 +55,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8548-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -419,7 +431,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -441,7 +452,6 @@
 	};
 
 	pci1: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 (PEX) */
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 6a99f1eef7a..95e28738183 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -53,10 +53,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8555-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -288,7 +300,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b6c2d71defd..ff70580a8f4 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -55,10 +55,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -359,7 +371,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts
new file mode 100644
index 00000000000..81a8dc2c636
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml510.dts
@@ -0,0 +1,465 @@
+/*
+ * Xilinx ML510 Reference Design support
+ *
+ * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
+ * The reference design contains a bug which prevent PCI DMA from working
+ * properly.  A description of the bug is given in the plbv46_pci section. It
+ * needs to be fixed by the user until Xilinx updates their reference design.
+ *
+ * Copyright 2009, Roderick Colenbrander
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	DDR2_SDRAM_DIMM0: memory@0 {
+		device_type = "memory";
+		reg = < 0x0 0x20000000 >;
+	} ;
+	alias {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-frequency = <300000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <300000000>;
+			xlnx,apu-control = <0x2000>;
+			xlnx,apu-udi-0 = <0x0>;
+			xlnx,apu-udi-1 = <0x0>;
+			xlnx,apu-udi-10 = <0x0>;
+			xlnx,apu-udi-11 = <0x0>;
+			xlnx,apu-udi-12 = <0x0>;
+			xlnx,apu-udi-13 = <0x0>;
+			xlnx,apu-udi-14 = <0x0>;
+			xlnx,apu-udi-15 = <0x0>;
+			xlnx,apu-udi-2 = <0x0>;
+			xlnx,apu-udi-3 = <0x0>;
+			xlnx,apu-udi-4 = <0x0>;
+			xlnx,apu-udi-5 = <0x0>;
+			xlnx,apu-udi-6 = <0x0>;
+			xlnx,apu-udi-7 = <0x0>;
+			xlnx,apu-udi-8 = <0x0>;
+			xlnx,apu-udi-9 = <0x0>;
+			xlnx,dcr-autolock-enable = <0x1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+			xlnx,dcu-rd-touch-plb-prio = <0x0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+			xlnx,dcu-wr-flush-plb-prio = <0x0>;
+			xlnx,dcu-wr-store-plb-prio = <0x0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+			xlnx,dma0-control = <0x0>;
+			xlnx,dma0-plb-prio = <0x0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0x0>;
+			xlnx,dma1-plb-prio = <0x0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0x0>;
+			xlnx,dma2-plb-prio = <0x0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0x0>;
+			xlnx,dma3-plb-prio = <0x0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0x0>;
+			xlnx,generate-plb-timespecs = <0x1>;
+			xlnx,icu-rd-fetch-plb-prio = <0x0>;
+			xlnx,icu-rd-spec-plb-prio = <0x0>;
+			xlnx,icu-rd-touch-plb-prio = <0x0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <0x1>;
+			xlnx,mplb-arb-mode = <0x0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <0x8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0x0>;
+			xlnx,mplb-prio-dcur = <0x2>;
+			xlnx,mplb-prio-dcuw = <0x3>;
+			xlnx,mplb-prio-icu = <0x4>;
+			xlnx,mplb-prio-splb0 = <0x1>;
+			xlnx,mplb-prio-splb1 = <0x0>;
+			xlnx,mplb-read-pipe-enable = <0x1>;
+			xlnx,mplb-sync-tattribute = <0x0>;
+			xlnx,mplb-wdog-enable = <0x1>;
+			xlnx,mplb-write-pipe-enable = <0x1>;
+			xlnx,mplb-write-post-enable = <0x1>;
+			xlnx,num-dma = <0x0>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0x0>;
+			xlnx,ppc440mc-addr-high = <0x1fffffff>;
+			xlnx,ppc440mc-arb-mode = <0x0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <0x8>;
+			xlnx,ppc440mc-prio-dcur = <0x2>;
+			xlnx,ppc440mc-prio-dcuw = <0x3>;
+			xlnx,ppc440mc-prio-icu = <0x4>;
+			xlnx,ppc440mc-prio-splb0 = <0x1>;
+			xlnx,ppc440mc-prio-splb1 = <0x0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
+			xlnx,ppcdm-asyncmode = <0x0>;
+			xlnx,ppcds-asyncmode = <0x0>;
+			xlnx,user-reset = <0x0>;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+		ranges ;
+		FLASH: flash@fc000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xfc000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x2710>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x2>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x1adb0>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 8 2 >;
+				llink-connected = <&Hard_Ethernet_MAC_fifo>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x3>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x8000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x8000>;
+			} ;
+		} ;
+		Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
+			compatible = "xlnx,xps-ll-fifo-1.01.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81a00000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 9 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x5f5e100>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x5>;
+			xlnx,sda-inertial-delay = <0x5>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LCD_OPTIONAL: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0xb>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_4Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x4>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+			current-speed = <9600>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 11 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <0x1003>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0x0>;
+			xlnx,has-external-xin = <0x0>;
+			xlnx,is-a-16550 = <0x1>;
+		} ;
+		SPI_EEPROM: xps-spi@feff8000 {
+			compatible = "xlnx,xps-spi-2.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 10 2 >;
+			reg = < 0xfeff8000 0x80 >;
+			xlnx,family = "virtex5";
+			xlnx,fifo-exist = <0x1>;
+			xlnx,num-ss-bits = <0x1>;
+			xlnx,num-transfer-bits = <0x8>;
+			xlnx,sck-ratio = <0x80>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		plbv46_pci_0: plbv46-pci@85e00000 {
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "xlnx,plbv46-pci-1.03.a";
+			device_type = "pci";
+			reg = < 0x85e00000 0x10000 >;
+
+			/*
+			 * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
+			 * 0 which means that a read/write to the memory mapped
+			 * i/o region (which starts at 0xa0000000) for pci
+			 * bar 0 on the plb side translates to 0.
+			 * It is important to set this value to 0xa0000000, so
+			 * that inbound and outbound pci transactions work
+			 * properly including DMA.
+			 */
+			ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;
+
+			#interrupt-cells = <1>;
+			interrupt-parent = <&xps_intc_0>;
+			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IRQ mapping for pci slots and ALI M1533
+				 * periperhals. In total there are 5 interrupt
+				 * lines connected to a xps_intc controller.
+				 * Four of them are PCI IRQ A, B, C, D and
+				 * which correspond to respectively xpx_intc
+				 * 5, 4, 3 and 2.  The fifth interrupt line is
+				 * connected to the south bridge and this one
+				 * uses irq 1 and is active high instead of
+				 * active low.
+				 *
+				 * The M1533 contains various peripherals
+				 * including AC97 audio, a modem, USB, IDE and
+				 * some power management stuff. The modem
+				 * isn't connected on the ML510 and the power
+				 * management core also isn't used.
+				 */
+
+				/* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
+				0x3000 0 0 1 &xps_intc_0 3 2
+				0x3000 0 0 2 &xps_intc_0 2 2
+				0x3000 0 0 3 &xps_intc_0 5 2
+				0x3000 0 0 4 &xps_intc_0 4 2
+
+				/* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
+				/*
+				0x11800 0 0 1 &xps_intc_0 5 0 2
+				0x11800 0 0 2 &xps_intc_0 4 0 2
+				0x11800 0 0 3 &xps_intc_0 3 0 2
+				0x11800 0 0 4 &xps_intc_0 2 0 2
+				*/
+
+				/* According to the datasheet + schematic
+				 * ABCD [FPGA] of slot 5 is mapped to DABC.
+				 * Testing showed that at least A maps to B,
+				 * the mapping of the other pins is a guess
+				 * and for that reason the lines have been
+				 * commented out.
+				 */
+				/* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
+				0x2800 0 0 1 &xps_intc_0 4 2
+				/*
+				0x2800 0 0 2 &xps_intc_0 3 2
+				0x2800 0 0 3 &xps_intc_0 2 2
+				0x2800 0 0 4 &xps_intc_0 5 2
+				*/
+
+				/* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
+				/*
+				0x11000 0 0 1 &xps_intc_0 4 0 2
+				0x11000 0 0 2 &xps_intc_0 3 0 2
+				0x11000 0 0 3 &xps_intc_0 2 0 2
+				0x11000 0 0 4 &xps_intc_0 5 0 2
+				*/
+
+				/* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
+				0x0800 0 0 1 &i8259 7 2
+
+				/* IDSEL 0x1b / dev=11, bus=0 / IDE */
+				0x5800 0 0 1 &i8259 14 2
+
+				/* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
+				0x7800 0 0 1 &i8259 7 2
+			>;
+			ali_m1533 {
+				#size-cells = <1>;
+				#address-cells = <2>;
+				i8259: interrupt-controller@20 {
+					reg = <1 0x20 2
+							1 0xa0 2
+							1 0x4d0 2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+
+					/* south bridge irq is active high */
+					interrupts = <1 3>;
+					interrupt-parent = <&xps_intc_0>;
+				};
+			};
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xc>;
+		} ;
+		xps_tft_0: tft@86e00000 {
+			compatible = "xlnx,xps-tft-1.00.a";
+			reg = < 0x86e00000 0x10000 >;
+			xlnx,dcr-splb-slave-if = <0x1>;
+			xlnx,default-tft-base-addr = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,i2c-slave-addr = <0x76>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-native-dwidth = <0x40>;
+			xlnx,mplb-smallest-slave = <0x20>;
+			xlnx,tft-interface = <0x1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 7e183ff9a31..01bfb56bbe8 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for PIKA Warp
  *
- * Copyright (c) 2008 PIKA Technologies
+ * Copyright (c) 2008-2009 PIKA Technologies
  *   Sean MacLennan <smaclennan@pikatech.com>
  *
  * This file is licensed under the terms of the GNU General Public
@@ -158,7 +158,7 @@
 
 					partition@0 {
 						label = "splash";
-						reg = <0x00000000 0x00020000>;
+						reg = <0x00000000 0x00010000>;
 					};
 					partition@300000 {
 						label = "fpga";
@@ -244,28 +244,27 @@
 			};
 
 			GPIO0: gpio@ef600b00 {
-				compatible = "ibm,gpio-440ep";
+				compatible = "ibm,ppc4xx-gpio";
 				reg = <0xef600b00 0x00000048>;
 				#gpio-cells = <2>;
 				gpio-controller;
 			};
 
 			GPIO1: gpio@ef600c00 {
-				compatible = "ibm,gpio-440ep";
+				compatible = "ibm,ppc4xx-gpio";
 				reg = <0xef600c00 0x00000048>;
 				#gpio-cells = <2>;
 				gpio-controller;
+			};
 
-				led@31 {
-					compatible = "linux,gpio-led";
-					linux,name = ":green:";
-					gpios = <&GPIO1 31 0>;
-				};		
-	
-				led@30 {	
-					compatible = "linux,gpio-led";
-					linux,name = ":red:";
-					gpios = <&GPIO1 30 0>;
+			power-leds {
+				compatible = "gpio-leds";
+				green {
+					gpios = <&GPIO1 0 0>;
+					default-state = "on";
+				};
+				red {
+					gpios = <&GPIO1 1 0>;
 				};
 			};
 
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index 51b2387bdba..98312d169c8 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -18,6 +18,9 @@
 #   $5 and more - kernel boot files; zImage*, uImage, cuImage.*, etc.
 #
 
+# Bail with error code if anything goes wrong
+set -e
+
 # User may have a custom install script
 
 if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index a32ec8d323a..173a5bb77ca 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -252,7 +252,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 4e9d85f39da..e9b8495cde0 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -254,7 +254,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 9917a09bad3..865725effe9 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:52 2009
+# Linux kernel version: 2.6.30-rc7
+# Wed Jun  3 10:18:16 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -49,10 +50,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -67,9 +70,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,22 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +124,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +165,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -170,7 +182,7 @@ CONFIG_KILAUEA=y
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
 # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_PPC40x_SIMPLE=y
 CONFIG_405EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -228,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -252,9 +267,10 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +288,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,7 +356,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -445,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,6 +511,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,6 +526,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +556,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -706,6 +722,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -749,6 +770,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -760,7 +782,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +797,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -790,11 +812,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -812,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -841,9 +867,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -851,17 +880,21 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -892,10 +925,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -964,6 +999,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -972,5 +1008,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 58bf2ac2e0d..14674754787 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Wed Jun  3 09:11:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -49,10 +50,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -67,9 +70,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,22 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +124,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +165,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -170,7 +182,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 CONFIG_MAKALU=y
 # CONFIG_WALNUT is not set
 # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_PPC40x_SIMPLE=y
 CONFIG_405EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -228,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -252,9 +267,10 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +288,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,7 +356,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -445,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,6 +511,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,6 +526,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +556,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -706,6 +722,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -749,6 +770,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -760,7 +782,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +797,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -790,11 +812,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -812,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -841,9 +867,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -851,17 +880,21 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -892,10 +925,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -964,6 +999,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -972,5 +1008,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index f5698f962e5..416e79ac071 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -258,7 +258,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1d72b0ac3f2..f7fd32c0942 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -258,7 +258,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 959bdc43a49..e57f1e4c179 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index f9a08ee49b9..5e85412eb9f 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
@@ -716,7 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia drivers
 #
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 # CONFIG_USB_DABUSB is not set
 
 #
@@ -725,7 +725,7 @@ CONFIG_DAB=y
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index be64aa644d1..b652f7dcab5 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -261,7 +261,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index f67250b24ec..c23a4ef13e4 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -256,7 +256,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 9348c12bd7a..b25fad1343d 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -260,7 +260,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index e665433762b..ed31d4f17b5 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -265,7 +265,7 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 70d5c3fa328..e14e89a5e06 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index a921fe3c371..6400aae04dd 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:45 2009
+# Linux kernel version: 2.6.29
+# Tue Apr  7 17:04:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -57,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +75,15 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -99,10 +113,8 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +124,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -123,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -135,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,11 +165,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +185,7 @@ CONFIG_SEQUOIA=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -238,9 +248,13 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -262,9 +276,10 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -278,18 +293,16 @@ CONFIG_PCI_LEGACY=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -448,14 +461,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -483,12 +505,16 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -515,6 +541,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -529,6 +556,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -568,6 +597,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -577,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -586,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -593,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -734,7 +765,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -750,6 +781,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -778,6 +810,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -842,7 +879,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -858,6 +894,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -873,11 +910,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -924,9 +962,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -934,17 +975,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -952,20 +996,7 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-CONFIG_PPC_EARLY_DEBUG_44x=y
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
@@ -988,10 +1019,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1060,6 +1093,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1068,5 +1102,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 826700872d2..ef32cc4f82e 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -260,7 +260,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 1bf0a63614b..2518b8568c7 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -263,7 +263,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 7d044dfd923..12dc7c40961 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_TPS65010 is not set
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_MCU_MPC8349EMITX=m
 # CONFIG_I2C_DEBUG_CORE is not set
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index b401950f525..4012483b189 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -470,8 +470,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
+#else  /* __powerpc64__ */
+#include <asm-generic/atomic64.h>
+
 #endif /* __powerpc64__ */
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/arch/powerpc/include/asm/bitsperlong.h b/arch/powerpc/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..5f1659032c4
--- /dev/null
+++ b/arch/powerpc/include/asm/bitsperlong.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_POWERPC_BITSPERLONG_H
+#define __ASM_POWERPC_BITSPERLONG_H
+
+#if defined(__powerpc64__)
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_POWERPC_BITSPERLONG_H */
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 0f5e8ff59a8..990ff191da8 100644
--- a/arch/powerpc/include/asm/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -14,10 +14,6 @@
 #include <asm/cpm.h>
 #include <sysdev/fsl_soc.h>
 
-#ifdef CONFIG_PPC_85xx
-#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
-#endif
-
 /* CPM Command register.
 */
 #define CPM_CR_RST	((uint)0x80000000)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb448d68452..3d9e887c3c0 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -15,9 +15,18 @@
 #include <linux/scatterlist.h>
 #include <linux/dma-attrs.h>
 #include <asm/io.h>
+#include <asm/swiotlb.h>
 
 #define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
 
+/* Some dma direct funcs must be visible for use in other dma_ops */
+extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag);
+extern void dma_direct_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle);
+
+extern unsigned long get_dma_direct_offset(struct device *dev);
+
 #ifdef CONFIG_NOT_COHERENT_CACHE
 /*
  * DMA-consistent mapping functions for PowerPCs that don't support
@@ -78,6 +87,8 @@ struct dma_mapping_ops {
 				dma_addr_t dma_address, size_t size,
 				enum dma_data_direction direction,
 				struct dma_attrs *attrs);
+	int		(*addr_needs_map)(struct device *dev, dma_addr_t addr,
+				size_t size);
 #ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
 	void            (*sync_single_range_for_cpu)(struct device *hwdev,
 				dma_addr_t dma_handle, unsigned long offset,
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index d6b4a12cdef..014a624f4c8 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -256,11 +256,11 @@ do {								\
  * even if we have an executable stack.
  */
 # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
-		(exec_stk != EXSTACK_DISABLE_X) : 0)
+		(exec_stk == EXSTACK_DEFAULT) : 0)
 #else 
 # define SET_PERSONALITY(ex) \
   set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT)
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
new file mode 100644
index 00000000000..9154e852673
--- /dev/null
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -0,0 +1,73 @@
+/*
+ *  Copyright 2007 Sony Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.
+ *  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_POWERPC_EMULATED_OPS_H
+#define _ASM_POWERPC_EMULATED_OPS_H
+
+#include <asm/atomic.h>
+
+
+#ifdef CONFIG_PPC_EMULATED_STATS
+
+struct ppc_emulated_entry {
+	const char *name;
+	atomic_t val;
+};
+
+extern struct ppc_emulated {
+#ifdef CONFIG_ALTIVEC
+	struct ppc_emulated_entry altivec;
+#endif
+	struct ppc_emulated_entry dcba;
+	struct ppc_emulated_entry dcbz;
+	struct ppc_emulated_entry fp_pair;
+	struct ppc_emulated_entry isel;
+	struct ppc_emulated_entry mcrxr;
+	struct ppc_emulated_entry mfpvr;
+	struct ppc_emulated_entry multiple;
+	struct ppc_emulated_entry popcntb;
+	struct ppc_emulated_entry spe;
+	struct ppc_emulated_entry string;
+	struct ppc_emulated_entry unaligned;
+#ifdef CONFIG_MATH_EMULATION
+	struct ppc_emulated_entry math;
+#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
+	struct ppc_emulated_entry 8xx;
+#endif
+#ifdef CONFIG_VSX
+	struct ppc_emulated_entry vsx;
+#endif
+} ppc_emulated;
+
+extern u32 ppc_warn_emulated;
+
+extern void ppc_warn_emulated_print(const char *type);
+
+#define PPC_WARN_EMULATED(type)						 \
+	do {								 \
+		atomic_inc(&ppc_emulated.type.val);			 \
+		if (ppc_warn_emulated)					 \
+			ppc_warn_emulated_print(ppc_emulated.type.name); \
+	} while (0)
+
+#else /* !CONFIG_PPC_EMULATED_STATS */
+
+#define PPC_WARN_EMULATED(type)	do { } while (0)
+
+#endif /* !CONFIG_PPC_EMULATED_STATS */
+
+#endif /* _ASM_POWERPC_EMULATED_OPS_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index e4094a5cb05..cbd4dfa4bce 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -8,8 +8,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __ASSEMBLY__
-
 /*
  * Feature section common macros
  *
@@ -23,10 +21,12 @@
 /* 64 bits kernel, 32 bits code (ie. vdso32) */
 #define FTR_ENTRY_LONG		.llong
 #define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
+#elif defined(CONFIG_PPC64)
+#define FTR_ENTRY_LONG		.llong
+#define FTR_ENTRY_OFFSET	.llong
 #else
-/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
-#define FTR_ENTRY_LONG		PPC_LONG
-#define FTR_ENTRY_OFFSET	PPC_LONG
+#define FTR_ENTRY_LONG		.long
+#define FTR_ENTRY_OFFSET	.long
 #endif
 
 #define START_FTR_SECTION(label)	label##1:
@@ -141,6 +141,21 @@ label##5:					       	\
 #define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
 	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
 
+#ifndef __ASSEMBLY__
+
+#define ASM_MMU_FTR_IF(section_if, section_else, msk, val)	\
+	stringify_in_c(BEGIN_MMU_FTR_SECTION)			\
+	section_if "; "						\
+	stringify_in_c(MMU_FTR_SECTION_ELSE)			\
+	section_else "; "					\
+	stringify_in_c(ALT_MMU_FTR_SECTION_END((msk), (val)))
+
+#define ASM_MMU_FTR_IFSET(section_if, section_else, msk)	\
+	ASM_MMU_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_MMU_FTR_IFCLR(section_if, section_else, msk)	\
+	ASM_MMU_FTR_IF(section_if, section_else, (msk), 0)
+
 #endif /* __ASSEMBLY__ */
 
 /* LWSYNC feature sections */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 20a44d0c9fd..b7f8f4a87cc 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -80,7 +80,7 @@ static inline void local_irq_disable(void)
 	__asm__ __volatile__("wrteei 0": : :"memory");
 #else
 	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
+
 	msr = mfmsr();
 	SET_MSR_EE(msr & ~MSR_EE);
 #endif
@@ -92,7 +92,7 @@ static inline void local_irq_enable(void)
 	__asm__ __volatile__("wrteei 1": : :"memory");
 #else
 	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
+
 	msr = mfmsr();
 	SET_MSR_EE(msr | MSR_EE);
 #endif
@@ -108,7 +108,6 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 #else
 	SET_MSR_EE(msr & ~MSR_EE);
 #endif
-	__asm__ __volatile__("": : :"memory");
 }
 
 #define local_save_flags(flags)	((flags) = mfmsr())
@@ -156,8 +155,6 @@ static inline void clear_perf_counter_pending(void)
 		"i" (offsetof(struct paca_struct, perf_counter_pending)));
 }
 
-extern void perf_counter_do_pending(void);
-
 #else
 
 static inline unsigned long test_perf_counter_pending(void)
@@ -167,7 +164,6 @@ static inline unsigned long test_perf_counter_pending(void)
 
 static inline void set_perf_counter_pending(void) {}
 static inline void clear_perf_counter_pending(void) {}
-static inline void perf_counter_do_pending(void) {}
 #endif /* CONFIG_PERF_COUNTERS */
 
 #endif	/* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7464c0daddd..7ead7c16fb7 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -35,6 +35,16 @@
 #define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
 #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
 
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
+
 /* Boot time flags */
 extern int iommu_is_off;
 extern int iommu_force_on;
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index d2a65e8ca6a..f78f65c38f0 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -20,6 +20,11 @@
 #define _ASM_POWERPC_LPPACA_H
 #ifdef __KERNEL__
 
+/* These definitions relate to hypervisors that only exist when using
+ * a server type processor
+ */
+#ifdef CONFIG_PPC_BOOK3S
+
 //=============================================================================
 //
 //	This control block contains the data that is shared between the
@@ -158,5 +163,6 @@ struct slb_shadow {
 
 extern struct slb_shadow slb_shadow[];
 
+#endif /* CONFIG_PPC_BOOK3S */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 0efdb1dfdc5..11d1fc3a896 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -110,6 +110,10 @@ struct machdep_calls {
 	void		(*show_percpuinfo)(struct seq_file *m, int i);
 
 	void		(*init_IRQ)(void);
+
+	/* Return an irq, or NO_IRQ to indicate there are none pending.
+	 * If for some reason there is no irq, but the interrupt
+	 * shouldn't be counted as spurious, return NO_IRQ_IGNORE. */
 	unsigned int	(*get_irq)(void);
 #ifdef CONFIG_KEXEC
 	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index e7b99bac9f4..7b1c49811a2 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_POWERPC_MMAN_H
 #define _ASM_POWERPC_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 /*
  * This program is free software; you can redistribute it and/or
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf15438709..fb57ded592f 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,11 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
+/* This indicates that the processor uses the ISA 2.06 server tlbie
+ * mnemonics
+ */
+#define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
+
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
@@ -69,10 +74,10 @@ extern void early_init_mmu_secondary(void);
 #endif /* !__ASSEMBLY__ */
 
 
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */
 #  include <asm/mmu-hash64.h>
-#elif defined(CONFIG_PPC_STD_MMU)
+#elif defined(CONFIG_PPC_STD_MMU_32)
 /* 32-bit classic hash table MMU */
 #  include <asm/mmu-hash32.h>
 #elif defined(CONFIG_40x)
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index a218da6bec7..fb841205745 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -28,6 +28,10 @@
 #define MPC52xx_PSC_MAXNUM	6
 
 /* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_UNEX_RX	0x0001
+#define MPC52xx_PSC_SR_DATA_VAL	0x0002
+#define MPC52xx_PSC_SR_DATA_OVR	0x0004
+#define MPC52xx_PSC_SR_CMDSEND	0x0008
 #define MPC52xx_PSC_SR_CDE	0x0080
 #define MPC52xx_PSC_SR_RXRDY	0x0100
 #define MPC52xx_PSC_SR_RXFULL	0x0200
@@ -61,6 +65,12 @@
 #define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
 
 /* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_UNEX_RX_SLOT 0x0001
+#define MPC52xx_PSC_IMR_DATA_VALID	0x0002
+#define MPC52xx_PSC_IMR_DATA_OVR	0x0004
+#define MPC52xx_PSC_IMR_CMD_SEND	0x0008
+#define MPC52xx_PSC_IMR_ERROR		0x0040
+#define MPC52xx_PSC_IMR_DEOF		0x0080
 #define MPC52xx_PSC_IMR_TXRDY		0x0100
 #define MPC52xx_PSC_IMR_RXRDY		0x0200
 #define MPC52xx_PSC_IMR_DB		0x0400
@@ -117,6 +127,7 @@
 #define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_AWR			(1 << 30)
 #define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
 #define MPC52xx_PSC_SICR_I2S			(1 << 22)
 #define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
deleted file mode 100644
index 15f650f987e..00000000000
--- a/arch/powerpc/include/asm/mpc86xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * MPC86xx definitions
- *
- * Author: Jeff Brown
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC86xx_H__
-#define __ASM_POWERPC_MPC86xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_PPC_86xx
-
-#define CPU0_BOOT_RELEASE 0x01000000
-#define CPU1_BOOT_RELEASE 0x02000000
-#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
-#define MCM_PORT_CONFIG_OFFSET 0x1010
-
-/* Offset from CCSRBAR */
-#define MPC86xx_MCM_OFFSET      (0x00000)
-#define MPC86xx_MCM_SIZE        (0x02000)
-
-#endif /* CONFIG_PPC_86xx */
-#endif /* __ASM_POWERPC_MPC86xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 6ef05572301..c8a3cbfe02f 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -43,6 +43,7 @@ struct task_struct;
  * processor.
  */
 struct paca_struct {
+#ifdef CONFIG_PPC_BOOK3S
 	/*
 	 * Because hw_cpu_id, unlike other paca fields, is accessed
 	 * routinely from other CPUs (from the IRQ code), we stick to
@@ -51,7 +52,7 @@ struct paca_struct {
 	 */
 
 	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
-
+#endif /* CONFIG_PPC_BOOK3S */
 	/*
 	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
 	 * load lock_token and paca_index with a single lwz
@@ -64,13 +65,16 @@ struct paca_struct {
 	u64 kernel_toc;			/* Kernel TOC address */
 	u64 kernelbase;			/* Base address of kernel */
 	u64 kernel_msr;			/* MSR while running in kernel */
+#ifdef CONFIG_PPC_STD_MMU_64
 	u64 stab_real;			/* Absolute address of segment table */
 	u64 stab_addr;			/* Virtual address of segment table */
+#endif /* CONFIG_PPC_STD_MMU_64 */
 	void *emergency_sp;		/* pointer to emergency stack */
 	u64 data_offset;		/* per cpu data offset */
 	s16 hw_cpu_id;			/* Physical processor number */
 	u8 cpu_start;			/* At startup, processor spins until */
 					/* this becomes non-zero. */
+#ifdef CONFIG_PPC_STD_MMU_64
 	struct slb_shadow *slb_shadow_ptr;
 
 	/*
@@ -81,11 +85,13 @@ struct paca_struct {
 	u64 exmc[10];		/* used for machine checks */
 	u64 exslb[10];		/* used for SLB/segment table misses
  				 * on the linear mapping */
-
-	mm_context_t context;
+	/* SLB related definitions */
 	u16 vmalloc_sllp;
 	u16 slb_cache_ptr;
 	u16 slb_cache[SLB_CACHE_ENTRIES];
+#endif /* CONFIG_PPC_STD_MMU_64 */
+
+	mm_context_t context;
 
 	/*
 	 * then miscellaneous read-write fields
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 32cbf16f10e..4940662ee87 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -231,6 +231,11 @@ extern void copy_user_page(void *to, void *from, unsigned long vaddr,
 		struct page *p);
 extern int page_is_ram(unsigned long pfn);
 
+#ifdef CONFIG_PPC_SMLPAR
+void arch_free_page(struct page *page, int order);
+#define HAVE_ARCH_FREE_PAGE
+#endif
+
 struct vm_area_struct;
 
 typedef struct page *pgtable_t;
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index a0e3f6e6b4e..bd0849dbcaa 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -41,7 +41,7 @@ extern void clear_pages(void *page, int order);
 static inline void clear_page(void *page) { clear_pages(page, 0); }
 extern void copy_page(void *to, void *from);
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #define PGD_T_LOG2	(__builtin_ffs(sizeof(pgd_t)) - 1)
 #define PTE_T_LOG2	(__builtin_ffs(sizeof(pte_t)) - 1)
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 043bfdfe4f7..5817a3b747e 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -180,6 +180,6 @@ do {						\
 	(test_thread_flag(TIF_32BIT) ? \
 	 VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 84007afabdb..4c61fa0b8d7 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -86,17 +86,12 @@ struct pci_controller {
 	void *io_base_alloc;
 #endif
 	resource_size_t io_base_phys;
-#ifndef CONFIG_PPC64
 	resource_size_t pci_io_size;
-#endif
 
 	/* Some machines (PReP) have a non 1:1 mapping of
 	 * the PCI memory space in the CPU bus space
 	 */
 	resource_size_t pci_mem_offset;
-#ifdef CONFIG_PPC64
-	unsigned long pci_io_size;
-#endif
 
 	/* Some machines have a special region to forward the ISA
 	 * "memory" cycles such as VGA memory regions. Left to 0
@@ -140,10 +135,12 @@ struct pci_controller {
 	struct resource	io_resource;
 	struct resource mem_resources[3];
 	int global_number;		/* PCI domain number */
+
+	resource_size_t dma_window_base_cur;
+	resource_size_t dma_window_size;
+
 #ifdef CONFIG_PPC64
 	unsigned long buid;
-	unsigned long dma_window_base_cur;
-	unsigned long dma_window_size;
 
 	void *private_data;
 #endif	/* CONFIG_PPC64 */
@@ -185,7 +182,6 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
 extern void setup_indirect_pci(struct pci_controller* hose,
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
-extern void setup_grackle(struct pci_controller *hose);
 #else	/* CONFIG_PPC64 */
 
 /*
@@ -221,6 +217,7 @@ struct pci_dn {
 #define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
 
 extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
+extern void * update_dn_pci_info(struct device_node *dn, void *data);
 
 /* Get a device_node from a pci_dev.  This code must be fast except
  * in the case where the sysdata is incorrect and needs to be fixed
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index c40db05f21e..8cd083c6150 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -31,9 +31,11 @@
 #error TASK_SIZE_USER64 exceeds pagetable range
 #endif
 
+#ifdef CONFIG_PPC_STD_MMU_64
 #if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
 #error TASK_SIZE_USER64 exceeds user VSID range
 #endif
+#endif
 
 /*
  * Define the address range of the vmalloc VM area.
@@ -199,8 +201,11 @@ static inline unsigned long pte_update(struct mm_struct *mm,
 	if (!huge)
 		assert_pte_locked(mm, addr);
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (old & _PAGE_HASHPTE)
 		hpte_need_flush(mm, addr, ptep, old, huge);
+#endif
+
 	return old;
 }
 
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 640ccbbc097..b74f16d45cb 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -25,6 +25,7 @@
 #define PPC_INST_LSWI			0x7c0004aa
 #define PPC_INST_LSWX			0x7c00042a
 #define PPC_INST_LWSYNC			0x7c2004ac
+#define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
 #define PPC_INST_MCRXR_MASK		0xfc0007fe
 #define PPC_INST_MFSPR_PVR		0x7c1f42a6
@@ -43,14 +44,18 @@
 
 #define PPC_INST_STSWI			0x7c0005aa
 #define PPC_INST_STSWX			0x7c00052a
+#define PPC_INST_STXVD2X		0x7c000798
+#define PPC_INST_TLBIE			0x7c000264
 #define PPC_INST_TLBILX			0x7c000024
 #define PPC_INST_WAIT			0x7c00007c
 
 /* macros to insert fields into opcodes */
-#define __PPC_RA(a)	((a & 0x1f) << 16)
-#define __PPC_RB(b)	((b & 0x1f) << 11)
-#define __PPC_T_TLB(t)	((t & 0x3) << 21)
-#define __PPC_WC(w)	((w & 0x3) << 21)
+#define __PPC_RA(a)	(((a) & 0x1f) << 16)
+#define __PPC_RB(b)	(((b) & 0x1f) << 11)
+#define __PPC_RS(s)	(((s) & 0x1f) << 21)
+#define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
+#define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
+#define __PPC_WC(w)	(((w) & 0x3) << 21)
 
 /* Deal with instructions that older assemblers aren't aware of */
 #define	PPC_DCBAL(a, b)		stringify_in_c(.long PPC_INST_DCBAL | \
@@ -69,5 +74,17 @@
 #define PPC_TLBILX_VA(a, b)	PPC_TLBILX(3, a, b)
 #define PPC_WAIT(w)		stringify_in_c(.long PPC_INST_WAIT | \
 					__PPC_WC(w))
+#define PPC_TLBIE(lp,a) 	stringify_in_c(.long PPC_INST_TLBIE | \
+					       __PPC_RB(a) | __PPC_RS(lp))
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(s, a, b)	(__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define STXVD2X(s, a, b)	stringify_in_c(.long PPC_INST_STXVD2X | \
+					       VSX_XX1((s), (a), (b)))
+#define LXVD2X(s, a, b)		stringify_in_c(.long PPC_INST_LXVD2X | \
+					       VSX_XX1((s), (a), (b)))
 
 #endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 384d90c9c27..f9729529c20 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -76,16 +76,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
 				REST_10GPRS(22, base)
 #endif
 
-/*
- * Define what the VSX XX1 form instructions will look like, then add
- * the 128 bit load store instructions based on that.
- */
-#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
-				 ((rb) << 11) | (((xs) >> 5)))
-
-#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
-#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
-
 #define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
 #define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
 #define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index cdb6fd814de..7f065e178ec 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -53,6 +53,13 @@ enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
 extern u64 ps3_os_area_get_rtc_diff(void);
 extern void ps3_os_area_set_rtc_diff(u64 rtc_diff);
 
+struct ps3_os_area_flash_ops {
+	ssize_t (*read)(void *buf, size_t count, loff_t pos);
+	ssize_t (*write)(const void *buf, size_t count, loff_t pos);
+};
+
+extern void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops);
+
 /* dma routines */
 
 enum ps3_dma_page_size {
@@ -418,15 +425,15 @@ static inline struct ps3_system_bus_driver *
  * @data: Data to set
  */
 
-static inline void ps3_system_bus_set_driver_data(
+static inline void ps3_system_bus_set_drvdata(
 	struct ps3_system_bus_device *dev, void *data)
 {
-	dev->core.driver_data = data;
+	dev_set_drvdata(&dev->core, data);
 }
-static inline void *ps3_system_bus_get_driver_data(
+static inline void *ps3_system_bus_get_drvdata(
 	struct ps3_system_bus_device *dev)
 {
-	return dev->core.driver_data;
+	return dev_get_drvdata(&dev->core);
 }
 
 /* These two need global scope for get_dma_ops(). */
@@ -520,7 +527,4 @@ void ps3_sync_irq(int node);
 u32 ps3_get_hw_thread_id(int cpu);
 u64 ps3_get_spe_id(void *arg);
 
-/* mutex synchronizing GPU accesses and video mode changes */
-extern struct mutex ps3_gpu_mutex;
-
 #endif
diff --git a/arch/powerpc/include/asm/ps3gpu.h b/arch/powerpc/include/asm/ps3gpu.h
new file mode 100644
index 00000000000..b2b89591907
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3gpu.h
@@ -0,0 +1,86 @@
+/*
+ *  PS3 GPU declarations.
+ *
+ *  Copyright 2009 Sony Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.
+ *  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_POWERPC_PS3GPU_H
+#define _ASM_POWERPC_PS3GPU_H
+
+#include <linux/mutex.h>
+
+#include <asm/lv1call.h>
+
+
+#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC	0x101
+#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP	0x102
+
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP	0x600
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT		0x601
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC	0x602
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE	0x603
+
+#define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION	(1ULL << 32)
+
+#define L1GPU_DISPLAY_SYNC_HSYNC		1
+#define L1GPU_DISPLAY_SYNC_VSYNC		2
+
+
+/* mutex synchronizing GPU accesses and video mode changes */
+extern struct mutex ps3_gpu_mutex;
+
+
+static inline int lv1_gpu_display_sync(u64 context_handle, u64 head,
+				       u64 ddr_offset)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC,
+					 head, ddr_offset, 0, 0);
+}
+
+static inline int lv1_gpu_display_flip(u64 context_handle, u64 head,
+				       u64 ddr_offset)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP,
+					 head, ddr_offset, 0, 0);
+}
+
+static inline int lv1_gpu_fb_setup(u64 context_handle, u64 xdr_lpar,
+				   u64 xdr_size, u64 ioif_offset)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP,
+					 xdr_lpar, xdr_size, ioif_offset, 0);
+}
+
+static inline int lv1_gpu_fb_blit(u64 context_handle, u64 ddr_offset,
+				  u64 ioif_offset, u64 sync_width, u64 pitch)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
+					 ddr_offset, ioif_offset, sync_width,
+					 pitch);
+}
+
+static inline int lv1_gpu_fb_close(u64 context_handle)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE, 0,
+					 0, 0, 0);
+}
+
+#endif /* _ASM_POWERPC_PS3GPU_H */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index c9c678fb253..8c341490cfc 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -135,7 +135,9 @@ do {									      \
  * These are defined as per linux/ptrace.h, which see.
  */
 #define arch_has_single_step()	(1)
+#define arch_has_block_step()	(!cpu_has_feature(CPU_FTR_601))
 extern void user_enable_single_step(struct task_struct *);
+extern void user_enable_block_step(struct task_struct *);
 extern void user_disable_single_step(struct task_struct *);
 
 #endif /* __ASSEMBLY__ */
@@ -288,4 +290,6 @@ extern void user_disable_single_step(struct task_struct *);
 #define PPC_PTRACE_PEEKUSR_3264  0x91
 #define PPC_PTRACE_POKEUSR_3264  0x90
 
+#define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
+
 #endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 2701753d993..157c5ca581c 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -22,7 +22,7 @@
 #include <asm/cpm.h>
 #include <asm/immap_qe.h>
 
-#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
 #define QE_NUM_OF_BRGS	16
 #define QE_NUM_OF_PORTS	1024
 
@@ -152,6 +152,9 @@ unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
 #define qe_muram_alloc cpm_muram_alloc
@@ -231,12 +234,16 @@ struct qe_bd {
 #define QE_ALIGNMENT_OF_PRAM	64
 
 /* RISC allocation */
-enum qe_risc_allocation {
-	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
-	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
-	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
-						   RISC 1 or RISC 2 */
-};
+#define QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
+						 QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
+					 QE_RISC_ALLOCATION_RISC2 | \
+					 QE_RISC_ALLOCATION_RISC3 | \
+					 QE_RISC_ALLOCATION_RISC4)
 
 /* QE extended filtering Table Lookup Key Size */
 enum qe_fltr_tbl_lookup_key_size {
@@ -668,6 +675,8 @@ struct ucc_slow_pram {
 #define UCC_GETH_UPSMR_RMM      0x00001000
 #define UCC_GETH_UPSMR_CAM      0x00000400
 #define UCC_GETH_UPSMR_BRO      0x00000200
+#define UCC_GETH_UPSMR_SMM	0x00000080
+#define UCC_GETH_UPSMR_SGMM	0x00000020
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fb359b0a693..a3c28e46947 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -745,11 +745,11 @@
 			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
 #ifdef CONFIG_PPC64
 #define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
-				     : : "r" (v))
+				     : : "r" (v) : "memory")
 #define mtmsrd(v)	__mtmsrd((v), 0)
 #define mtmsr(v)	mtmsrd(v)
 #else
-#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
+#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v) : "memory")
 #endif
 
 #define mfspr(rn)	({unsigned long rval; \
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index fcf7d55afe4..912bf597870 100644
--- a/arch/powerpc/include/asm/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -21,7 +21,7 @@ struct scatterlist {
 	unsigned int offset;
 	unsigned int length;
 
-	/* For TCE support */
+	/* For TCE or SWIOTLB support */
 	dma_addr_t dma_address;
 	u32 dma_length;
 };
@@ -34,11 +34,7 @@ struct scatterlist {
  * is 0.
  */
 #define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef __powerpc64__
 #define sg_dma_len(sg)		((sg)->dma_length)
-#else
-#define sg_dma_len(sg)		((sg)->length)
-#endif
 
 #ifdef __powerpc64__
 #define ISA_DMA_THRESHOLD	(~0UL)
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index 69f709d8e8e..3eb13be11d8 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -94,7 +94,7 @@ typedef struct {
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 struct old_sigaction {
 	__sighandler_t sa_handler;
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
new file mode 100644
index 00000000000..30891d6e2bc
--- /dev/null
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_SWIOTLB_H
+#define __ASM_SWIOTLB_H
+
+#include <linux/swiotlb.h>
+
+extern struct dma_mapping_ops swiotlb_dma_ops;
+extern struct dma_mapping_ops swiotlb_pci_dma_ops;
+
+int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
+				       size_t size);
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+extern unsigned int ppc_swiotlb_enable;
+int __init swiotlb_setup_bus_notifier(void);
+
+#endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index a0b92de51c7..370600ca276 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -325,3 +325,4 @@ SYSCALL(inotify_init1)
 SYSCALL_SPU(perf_counter_open)
 COMPAT_SYS_SPU(preadv)
 COMPAT_SYS_SPU(pwritev)
+COMPAT_SYS(rt_tgsigqueueinfo)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index 2b2420a4988..bb8e006a47c 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -211,7 +211,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
 
 extern unsigned int rtas_data;
 extern int mem_init_done;	/* set on boot once kmalloc can be called */
-extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
+extern int init_bootmem_done;	/* set once bootmem is available */
 extern phys_addr_t memory_limit;
 extern unsigned long klimit;
 
diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h
index 2c14fea07c8..a24f48704a3 100644
--- a/arch/powerpc/include/asm/termios.h
+++ b/arch/powerpc/include/asm/termios.h
@@ -78,7 +78,7 @@ struct termio {
 
 #ifdef __KERNEL__
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 7ce27a52bb3..a5aea0ca34e 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -40,15 +40,6 @@ typedef struct {
 #endif /* __ASSEMBLY__ */
 
 #ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __powerpc64__
-#define BITS_PER_LONG 64
-#else
-#define BITS_PER_LONG 32
-#endif
-
 #ifndef __ASSEMBLY__
 
 typedef __vector128 vector128;
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 4badac2d11d..cef080bfc60 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -344,10 +344,11 @@
 #define __NR_perf_counter_open	319
 #define __NR_preadv		320
 #define __NR_pwritev		321
+#define __NR_rt_tgsigqueueinfo	322
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		322
+#define __NR_syscalls		323
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/powerpc/include/asm/xilinx_pci.h b/arch/powerpc/include/asm/xilinx_pci.h
new file mode 100644
index 00000000000..7a8275caf6a
--- /dev/null
+++ b/arch/powerpc/include/asm/xilinx_pci.h
@@ -0,0 +1,21 @@
+/*
+ * Xilinx pci external definitions
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef INCLUDE_XILINX_PCI
+#define INCLUDE_XILINX_PCI
+
+#ifdef CONFIG_XILINX_PCI
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif /* INCLUDE_XILINX_PCI */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a2c683403c2..612b0c4dc26 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   firmware.o nvram_64.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
-obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
+obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o of_platform.o prom_parse.o
 obj-$(CONFIG_PPC_CLOCK)		+= clock.o
@@ -82,6 +82,7 @@ obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
@@ -111,6 +112,7 @@ obj-y				+= ppc_save_regs.o
 endif
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
+extra-$(CONFIG_ALTIVEC)		+= vector.o
 extra-$(CONFIG_PPC64)		+= entry_64.o
 
 extra-y				+= systbl_chk.i
@@ -123,6 +125,7 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
 
+ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
 $(obj)/built-in.o:		prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -131,5 +134,6 @@ quiet_cmd_prom_init_check = CALL    $<
 PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
 	$(call cmd,prom_init_check)
+endif
 
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 5ffcfaa77d6..a5b632e52fa 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -24,6 +24,7 @@
 #include <asm/system.h>
 #include <asm/cache.h>
 #include <asm/cputable.h>
+#include <asm/emulated_ops.h>
 
 struct aligninfo {
 	unsigned char len;
@@ -730,8 +731,10 @@ int fix_alignment(struct pt_regs *regs)
 	areg = dsisr & 0x1f;		/* register to update */
 
 #ifdef CONFIG_SPE
-	if ((instr >> 26) == 0x4)
+	if ((instr >> 26) == 0x4) {
+		PPC_WARN_EMULATED(spe);
 		return emulate_spe(regs, reg, instr);
+	}
 #endif
 
 	instr = (dsisr >> 10) & 0x7f;
@@ -783,23 +786,28 @@ int fix_alignment(struct pt_regs *regs)
 			flags |= SPLT;
 			nb = 8;
 		}
+		PPC_WARN_EMULATED(vsx);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb);
 	}
 #endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
 	 */
-	if (instr == DCBZ)
+	if (instr == DCBZ) {
+		PPC_WARN_EMULATED(dcbz);
 		return emulate_dcbz(regs, addr);
+	}
 	if (unlikely(nb == 0))
 		return 0;
 
 	/* Load/Store Multiple instructions are handled in their own
 	 * function
 	 */
-	if (flags & M)
+	if (flags & M) {
+		PPC_WARN_EMULATED(multiple);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
+	}
 
 	/* Verify the address of the operand */
 	if (unlikely(user_mode(regs) &&
@@ -816,8 +824,12 @@ int fix_alignment(struct pt_regs *regs)
 	}
 
 	/* Special case for 16-byte FP loads and stores */
-	if (nb == 16)
+	if (nb == 16) {
+		PPC_WARN_EMULATED(fp_pair);
 		return emulate_fp_pair(addr, reg, flags);
+	}
+
+	PPC_WARN_EMULATED(unaligned);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index e981d1ce191..561b6465231 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -122,8 +122,6 @@ int main(void)
 	DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
 	DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
 	DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
-	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
-	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
 	DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
 	DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
 	DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
@@ -132,35 +130,30 @@ int main(void)
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
 	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending));
-	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
-	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
-	DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
 					    context.low_slices_psize));
 	DEFINE(PACAHIGHSLICEPSIZE, offsetof(struct paca_struct,
 					    context.high_slices_psize));
 	DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
+#endif /* CONFIG_PPC_MM_SLICES */
+#ifdef CONFIG_PPC_STD_MMU_64
+	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
+	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
+	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
+	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
+	DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
+#ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(MMUPSIZESLLP, offsetof(struct mmu_psize_def, sllp));
 #else
 	DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
-
 #endif /* CONFIG_PPC_MM_SLICES */
 	DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
 	DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
 	DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
-	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
 	DEFINE(PACALPPACAPTR, offsetof(struct paca_struct, lppaca_ptr));
-	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
-	DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
-	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
-	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
-	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
 	DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr));
-	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
-	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
-
 	DEFINE(SLBSHADOW_STACKVSID,
 	       offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid));
 	DEFINE(SLBSHADOW_STACKESID,
@@ -170,6 +163,15 @@ int main(void)
 	DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
 	DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
 	DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area));
+#endif /* CONFIG_PPC_STD_MMU_64 */
+	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
+	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+	DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
+	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
+	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
+	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
+	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
+	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 #endif /* CONFIG_PPC64 */
 
 	/* RTAS */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 3e33fb933d9..4a24a2fc457 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -427,7 +427,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (architected)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTR_HPTE_TABLE |
+			MMU_FTR_TLBIE_206,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
@@ -441,7 +442,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (raw)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTR_HPTE_TABLE |
+			MMU_FTR_TLBIE_206,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
new file mode 100644
index 00000000000..68ccf11e4f1
--- /dev/null
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -0,0 +1,163 @@
+/*
+ * Contains routines needed to support swiotlb for ppc.
+ *
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/pfn.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/swiotlb.h>
+#include <asm/dma.h>
+#include <asm/abs_addr.h>
+
+int swiotlb __read_mostly;
+unsigned int ppc_swiotlb_enable;
+
+void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
+{
+	unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
+	void *pageaddr = page_address(pfn_to_page(pfn));
+
+	if (pageaddr != NULL)
+		return pageaddr + (addr % PAGE_SIZE);
+	return NULL;
+}
+
+dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
+{
+	return paddr + get_dma_direct_offset(hwdev);
+}
+
+phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
+
+{
+	return baddr - get_dma_direct_offset(hwdev);
+}
+
+/*
+ * Determine if an address needs bounce buffering via swiotlb.
+ * Going forward I expect the swiotlb code to generalize on using
+ * a dma_ops->addr_needs_map, and this function will move from here to the
+ * generic swiotlb code.
+ */
+int
+swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
+				   size_t size)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->addr_needs_map(hwdev, addr, size);
+}
+
+/*
+ * Determine if an address is reachable by a pci device, or if we must bounce.
+ */
+static int
+swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
+{
+	u64 mask = dma_get_mask(hwdev);
+	dma_addr_t max;
+	struct pci_controller *hose;
+	struct pci_dev *pdev = to_pci_dev(hwdev);
+
+	hose = pci_bus_to_host(pdev->bus);
+	max = hose->dma_window_base_cur + hose->dma_window_size;
+
+	/* check that we're within mapped pci window space */
+	if ((addr + size > max) | (addr < hose->dma_window_base_cur))
+		return 1;
+
+	return !is_buffer_dma_capable(mask, addr, size);
+}
+
+static int
+swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
+{
+	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+}
+
+
+/*
+ * At the moment, all platforms that use this code only require
+ * swiotlb to be used if we're operating on HIGHMEM.  Since
+ * we don't ever call anything other than map_sg, unmap_sg,
+ * map_page, and unmap_page on highmem, use normal dma_ops
+ * for everything else.
+ */
+struct dma_mapping_ops swiotlb_dma_ops = {
+	.alloc_coherent = dma_direct_alloc_coherent,
+	.free_coherent = dma_direct_free_coherent,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.dma_supported = swiotlb_dma_supported,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.addr_needs_map = swiotlb_addr_needs_map,
+	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+struct dma_mapping_ops swiotlb_pci_dma_ops = {
+	.alloc_coherent = dma_direct_alloc_coherent,
+	.free_coherent = dma_direct_free_coherent,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.dma_supported = swiotlb_dma_supported,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.addr_needs_map = swiotlb_pci_addr_needs_map,
+	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
+				  unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	/* We are only intereted in device addition */
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return 0;
+
+	/* May need to bounce if the device can't address all of DRAM */
+	if (dma_get_mask(dev) < lmb_end_of_DRAM())
+		set_dma_ops(dev, &swiotlb_dma_ops);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
+	.notifier_call = ppc_swiotlb_bus_notify,
+	.priority = 0,
+};
+
+static struct notifier_block ppc_swiotlb_of_bus_notifier = {
+	.notifier_call = ppc_swiotlb_bus_notify,
+	.priority = 0,
+};
+
+int __init swiotlb_setup_bus_notifier(void)
+{
+	bus_register_notifier(&platform_bus_type,
+			      &ppc_swiotlb_plat_bus_notifier);
+	bus_register_notifier(&of_platform_bus_type,
+			      &ppc_swiotlb_of_bus_notifier);
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6b02793dc75..20a60d661ba 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -19,7 +19,7 @@
  * default the offset is PCI_DRAM_OFFSET.
  */
 
-static unsigned long get_dma_direct_offset(struct device *dev)
+unsigned long get_dma_direct_offset(struct device *dev)
 {
 	if (dev)
 		return (unsigned long)dev->archdata.dma_data;
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
new file mode 100644
index 00000000000..eb898112e57
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -0,0 +1,978 @@
+/*
+ * This file contains the 64-bit "server" PowerPC variant
+ * of the low level exception handling including exception
+ * vectors, exception return, part of the slb and stab
+ * handling and other fixed offset specific things.
+ *
+ * This file is meant to be #included from head_64.S due to
+ * position dependant assembly.
+ *
+ * Most of this originates from head_64.S and thus has the same
+ * copyright history.
+ *
+ */
+
+/*
+ * We layout physical memory as follows:
+ * 0x0000 - 0x00ff : Secondary processor spin code
+ * 0x0100 - 0x2fff : pSeries Interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 -        : Early init and support code
+ */
+
+
+/*
+ *   SPRG Usage
+ *
+ *   Register	Definition
+ *
+ *   SPRG0	reserved for hypervisor
+ *   SPRG1	temp - used to save gpr
+ *   SPRG2	temp - used to save gpr
+ *   SPRG3	virt addr of paca
+ */
+
+/*
+ * This is the start of the interrupt handlers for pSeries
+ * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
+ */
+	. = 0x100
+	.globl __start_interrupts
+__start_interrupts:
+
+	STD_EXCEPTION_PSERIES(0x100, system_reset)
+
+	. = 0x200
+_machine_check_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+	. = 0x300
+	.globl data_access_pSeries
+data_access_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13
+BEGIN_FTR_SECTION
+	mtspr	SPRN_SPRG2,r12
+	mfspr	r13,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
+	srdi	r13,r13,60
+	rlwimi	r13,r12,16,0x20
+	mfcr	r12
+	cmpwi	r13,0x2c
+	beq	do_stab_bolted_pSeries
+	mtcrf	0x80,r12
+	mfspr	r12,SPRN_SPRG2
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+
+	. = 0x380
+	.globl data_access_slb_pSeries
+data_access_slb_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_DAR
+	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
+	mfcr	r9
+#ifdef __DISABLED__
+	/* Keep that around for when we re-implement dynamic VSIDs */
+	cmpdi	r3,0
+	bge	slb_miss_user_pseries
+#endif /* __DISABLED__ */
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to .slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+
+	STD_EXCEPTION_PSERIES(0x400, instruction_access)
+
+	. = 0x480
+	.globl instruction_access_slb_pSeries
+instruction_access_slb_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
+	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
+	mfcr	r9
+#ifdef __DISABLED__
+	/* Keep that around for when we re-implement dynamic VSIDs */
+	cmpdi	r3,0
+	bge	slb_miss_user_pseries
+#endif /* __DISABLED__ */
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+
+	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
+	STD_EXCEPTION_PSERIES(0x600, alignment)
+	STD_EXCEPTION_PSERIES(0x700, program_check)
+	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
+	MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
+	STD_EXCEPTION_PSERIES(0xa00, trap_0a)
+	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+
+	. = 0xc00
+	.globl	system_call_pSeries
+system_call_pSeries:
+	HMT_MEDIUM
+BEGIN_FTR_SECTION
+	cmpdi	r0,0x1ebe
+	beq-	1f
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
+	mr	r9,r13
+	mfspr	r13,SPRN_SPRG3
+	mfspr	r11,SPRN_SRR0
+	ld	r12,PACAKBASE(r13)
+	ld	r10,PACAKMSR(r13)
+	LOAD_HANDLER(r12, system_call_entry)
+	mtspr	SPRN_SRR0,r12
+	mfspr	r12,SPRN_SRR1
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.	/* prevent speculative execution */
+
+/* Fast LE/BE switch system call */
+1:	mfspr	r12,SPRN_SRR1
+	xori	r12,r12,MSR_LE
+	mtspr	SPRN_SRR1,r12
+	rfid		/* return to userspace */
+	b	.
+
+	STD_EXCEPTION_PSERIES(0xd00, single_step)
+	STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+
+	/* We need to deal with the Altivec unavailable exception
+	 * here which is at 0xf20, thus in the middle of the
+	 * prolog code of the PerformanceMonitor one. A little
+	 * trickery is thus necessary
+	 */
+	. = 0xf00
+	b	performance_monitor_pSeries
+
+	. = 0xf20
+	b	altivec_unavailable_pSeries
+
+	. = 0xf40
+	b	vsx_unavailable_pSeries
+
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+#endif /* CONFIG_CBE_RAS */
+	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+	. = 0x3000
+
+/*** pSeries interrupt support ***/
+
+	/* moved from 0xf00 */
+	STD_EXCEPTION_PSERIES(., performance_monitor)
+	STD_EXCEPTION_PSERIES(., altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., vsx_unavailable)
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt:
+	stb	r10,PACAHARDIRQEN(r13)
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	mfspr	r10,SPRN_SRR1
+	rldicl	r10,r10,48,1		/* clear MSR_EE */
+	rotldi	r10,r10,16
+	mtspr	SPRN_SRR1,r10
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	mfspr	r13,SPRN_SPRG1
+	rfid
+	b	.
+
+	.align	7
+do_stab_bolted_pSeries:
+	mtcrf	0x80,r12
+	mfspr	r12,SPRN_SPRG2
+	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option.  Share common code.
+ */
+	.globl system_reset_fwnmi
+      .align 7
+system_reset_fwnmi:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+	.globl machine_check_fwnmi
+      .align 7
+machine_check_fwnmi:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef __DISABLED__
+/*
+ * This is used for when the SLB miss handler has to go virtual,
+ * which doesn't happen for now anymore but will once we re-implement
+ * dynamic VSIDs for shared page tables
+ */
+slb_miss_user_pseries:
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r10,SPRG1
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	ld	r12,PACA_EXSLB+EX_R3(r13)
+	std	r10,PACA_EXGEN+EX_R13(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R3(r13)
+	clrrdi	r12,r13,32
+	mfmsr	r10
+	mfspr	r11,SRR0			/* save SRR0 */
+	ori	r12,r12,slb_miss_user_common@l	/* virt addr of handler */
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
+	mtspr	SRR0,r12
+	mfspr	r12,SRR1			/* and SRR1 */
+	mtspr	SRR1,r10
+	rfid
+	b	.				/* prevent spec. execution */
+#endif /* __DISABLED__ */
+
+	.align	7
+	.globl	__end_interrupts
+__end_interrupts:
+
+/*
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above.  Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
+ */
+
+/*** Common interrupt handlers ***/
+
+	STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+
+	/*
+	 * Machine check is different because we use a different
+	 * save area: PACA_EXMC instead of PACA_EXGEN.
+	 */
+	.align	7
+	.globl machine_check_common
+machine_check_common:
+	EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+	FINISH_NAP
+	DISABLE_INTS
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.machine_check_exception
+	b	.ret_from_except
+
+	STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
+	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
+	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
+	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
+	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
+	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
+#ifdef CONFIG_ALTIVEC
+	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+#else
+	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+#endif
+#ifdef CONFIG_CBE_RAS
+	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
+	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
+	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+#endif /* CONFIG_CBE_RAS */
+
+	.align	7
+system_call_entry:
+	b	system_call_common
+
+/*
+ * Here we have detected that the kernel stack pointer is bad.
+ * R9 contains the saved CR, r13 points to the paca,
+ * r10 contains the (bad) kernel stack pointer,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * We switch to using an emergency stack, save the registers there,
+ * and call kernel_bad_stack(), which panics.
+ */
+bad_stack:
+	ld	r1,PACAEMERGSP(r13)
+	subi	r1,r1,64+INT_FRAME_SIZE
+	std	r9,_CCR(r1)
+	std	r10,GPR1(r1)
+	std	r11,_NIP(r1)
+	std	r12,_MSR(r1)
+	mfspr	r11,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
+	std	r11,_DAR(r1)
+	std	r12,_DSISR(r1)
+	mflr	r10
+	mfctr	r11
+	mfxer	r12
+	std	r10,_LINK(r1)
+	std	r11,_CTR(r1)
+	std	r12,_XER(r1)
+	SAVE_GPR(0,r1)
+	SAVE_GPR(2,r1)
+	SAVE_4GPRS(3,r1)
+	SAVE_2GPRS(7,r1)
+	SAVE_10GPRS(12,r1)
+	SAVE_10GPRS(22,r1)
+	lhz	r12,PACA_TRAP_SAVE(r13)
+	std	r12,_TRAP(r1)
+	addi	r11,r1,INT_FRAME_SIZE
+	std	r11,0(r1)
+	li	r12,0
+	std	r12,0(r11)
+	ld	r2,PACATOC(r13)
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.kernel_bad_stack
+	b	1b
+
+/*
+ * Here r13 points to the paca, r9 contains the saved CR,
+ * SRR0 and SRR1 are saved in r11 and r12,
+ * r9 - r13 are saved in paca->exgen.
+ */
+	.align	7
+	.globl data_access_common
+data_access_common:
+	mfspr	r10,SPRN_DAR
+	std	r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr	r10,SPRN_DSISR
+	stw	r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+	ld	r3,PACA_EXGEN+EX_DAR(r13)
+	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
+	li	r5,0x300
+	b	.do_hash_page	 	/* Try to handle as hpte fault */
+
+	.align	7
+	.globl instruction_access_common
+instruction_access_common:
+	EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+	ld	r3,_NIP(r1)
+	andis.	r4,r12,0x5820
+	li	r5,0x400
+	b	.do_hash_page		/* Try to handle as hpte fault */
+
+/*
+ * Here is the common SLB miss user that is used when going to virtual
+ * mode for SLB misses, that is currently not used
+ */
+#ifdef __DISABLED__
+	.align	7
+	.globl	slb_miss_user_common
+slb_miss_user_common:
+	mflr	r10
+	std	r3,PACA_EXGEN+EX_DAR(r13)
+	stw	r9,PACA_EXGEN+EX_CCR(r13)
+	std	r10,PACA_EXGEN+EX_LR(r13)
+	std	r11,PACA_EXGEN+EX_SRR0(r13)
+	bl	.slb_allocate_user
+
+	ld	r10,PACA_EXGEN+EX_LR(r13)
+	ld	r3,PACA_EXGEN+EX_R3(r13)
+	lwz	r9,PACA_EXGEN+EX_CCR(r13)
+	ld	r11,PACA_EXGEN+EX_SRR0(r13)
+	mtlr	r10
+	beq-	slb_miss_fault
+
+	andi.	r10,r12,MSR_RI		/* check for unrecoverable exception */
+	beq-	unrecov_user_slb
+	mfmsr	r10
+
+.machine push
+.machine "power4"
+	mtcrf	0x80,r9
+.machine pop
+
+	clrrdi	r10,r10,2		/* clear RI before setting SRR0/1 */
+	mtmsrd	r10,1
+
+	mtspr	SRR0,r11
+	mtspr	SRR1,r12
+
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
+	ld	r13,PACA_EXGEN+EX_R13(r13)
+	rfid
+	b	.
+
+slb_miss_fault:
+	EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
+	ld	r4,PACA_EXGEN+EX_DAR(r13)
+	li	r5,0
+	std	r4,_DAR(r1)
+	std	r5,_DSISR(r1)
+	b	handle_page_fault
+
+unrecov_user_slb:
+	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+	mflr	r10
+#ifdef CONFIG_RELOCATABLE
+	mtctr	r11
+#endif
+
+	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
+	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
+
+	bl	.slb_allocate_realmode
+
+	/* All done -- return from exception. */
+
+	ld	r10,PACA_EXSLB+EX_LR(r13)
+	ld	r3,PACA_EXSLB+EX_R3(r13)
+	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	ld	r11,PACALPPACAPTR(r13)
+	ld	r11,LPPACASRR0(r11)		/* get SRR0 value */
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+
+	mtlr	r10
+
+	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
+	beq-	2f
+
+.machine	push
+.machine	"power4"
+	mtcrf	0x80,r9
+	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
+.machine	pop
+
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	rfid
+	b	.	/* prevent speculative execution */
+
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	b	unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+	mfspr	r11,SPRN_SRR0
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10,unrecov_slb)
+	mtspr	SPRN_SRR0,r10
+	ld	r10,PACAKMSR(r13)
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.
+
+unrecov_slb:
+	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+	.align	7
+	.globl hardware_interrupt_common
+	.globl hardware_interrupt_entry
+hardware_interrupt_common:
+	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+	FINISH_NAP
+hardware_interrupt_entry:
+	DISABLE_INTS
+BEGIN_FTR_SECTION
+	bl	.ppc64_runlatch_on
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.do_IRQ
+	b	.ret_from_except_lite
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+	andc	r9,r9,r10
+	std	r9,TI_LOCAL_FLAGS(r11)
+	ld	r10,_LINK(r1)		/* make idle task do the */
+	std	r10,_NIP(r1)		/* equivalent of a blr */
+	blr
+#endif
+
+	.align	7
+	.globl alignment_common
+alignment_common:
+	mfspr	r10,SPRN_DAR
+	std	r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr	r10,SPRN_DSISR
+	stw	r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
+	ld	r3,PACA_EXGEN+EX_DAR(r13)
+	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.alignment_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl program_check_common
+program_check_common:
+	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.program_check_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl fp_unavailable_common
+fp_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
+	bne	1f			/* if from user, just load it up */
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.kernel_fp_unavailable_exception
+	BUG_OPCODE
+1:	bl	.load_up_fpu
+	b	fast_exception_return
+
+	.align	7
+	.globl altivec_unavailable_common
+altivec_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	beq	1f
+	bl	.load_up_altivec
+	b	fast_exception_return
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.altivec_unavailable_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl vsx_unavailable_common
+vsx_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	bne	.load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.vsx_unavailable_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl	__end_handlers
+__end_handlers:
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exc_return_irq:			/* restores irq state too */
+	ld	r3,SOFTE(r1)
+	TRACE_AND_RESTORE_IRQ(r3);
+	ld	r12,_MSR(r1)
+	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
+	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
+	b	1f
+
+	.globl	fast_exception_return
+fast_exception_return:
+	ld	r12,_MSR(r1)
+1:	ld	r11,_NIP(r1)
+	andi.	r3,r12,MSR_RI		/* check if RI is set */
+	beq-	unrecov_fer
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	andi.	r3,r12,MSR_PR
+	beq	2f
+	ACCOUNT_CPU_USER_EXIT(r3, r4)
+2:
+#endif
+
+	ld	r3,_CCR(r1)
+	ld	r4,_LINK(r1)
+	ld	r5,_CTR(r1)
+	ld	r6,_XER(r1)
+	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtxer	r6
+	REST_GPR(0, r1)
+	REST_8GPRS(2, r1)
+
+	mfmsr	r10
+	rldicl	r10,r10,48,1		/* clear EE */
+	rldicr	r10,r10,16,61		/* clear RI (LE is 0 already) */
+	mtmsrd	r10,1
+
+	mtspr	SPRN_SRR1,r12
+	mtspr	SPRN_SRR0,r11
+	REST_4GPRS(10, r1)
+	ld	r1,GPR1(r1)
+	rfid
+	b	.	/* prevent speculative execution */
+
+unrecov_fer:
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+
+/*
+ * Hash table stuff
+ */
+	.align	7
+_STATIC(do_hash_page)
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+
+	andis.	r0,r4,0xa450		/* weird error? */
+	bne-	handle_page_fault	/* if not, try to insert a HPTE */
+BEGIN_FTR_SECTION
+	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
+	bne-	do_ste_alloc		/* If so handle it */
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+
+	/*
+	 * On iSeries, we soft-disable interrupts here, then
+	 * hard-enable interrupts so that the hash_page code can spin on
+	 * the hash_table_lock without problems on a shared processor.
+	 */
+	DISABLE_INTS
+
+	/*
+	 * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
+	 * and will clobber volatile registers when irq tracing is enabled
+	 * so we need to reload them. It may be possible to be smarter here
+	 * and move the irq tracing elsewhere but let's keep it simple for
+	 * now
+	 */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	ld	r3,_DAR(r1)
+	ld	r4,_DSISR(r1)
+	ld	r5,_TRAP(r1)
+	ld	r12,_MSR(r1)
+	clrrdi	r5,r5,4
+#endif /* CONFIG_TRACE_IRQFLAGS */
+	/*
+	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+	 * accessing a userspace segment (even from the kernel). We assume
+	 * kernel addresses always have the high bit set.
+	 */
+	rlwinm	r4,r4,32-25+9,31-9,31-9	/* DSISR_STORE -> _PAGE_RW */
+	rotldi	r0,r3,15		/* Move high bit into MSR_PR posn */
+	orc	r0,r12,r0		/* MSR_PR | ~high_bit */
+	rlwimi	r4,r0,32-13,30,30	/* becomes _PAGE_USER access bit */
+	ori	r4,r4,1			/* add _PAGE_PRESENT */
+	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
+
+	/*
+	 * r3 contains the faulting address
+	 * r4 contains the required access permissions
+	 * r5 contains the trap number
+	 *
+	 * at return r3 = 0 for success
+	 */
+	bl	.hash_page		/* build HPTE if possible */
+	cmpdi	r3,0			/* see if hash_page succeeded */
+
+BEGIN_FW_FTR_SECTION
+	/*
+	 * If we had interrupts soft-enabled at the point where the
+	 * DSI/ISI occurred, and an interrupt came in during hash_page,
+	 * handle it now.
+	 * We jump to ret_from_except_lite rather than fast_exception_return
+	 * because ret_from_except_lite will check for and handle pending
+	 * interrupts if necessary.
+	 */
+	beq	13f
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+
+BEGIN_FW_FTR_SECTION
+	/*
+	 * Here we have interrupts hard-disabled, so it is sufficient
+	 * to restore paca->{soft,hard}_enable and get out.
+	 */
+	beq	fast_exc_return_irq	/* Return from exception on success */
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+
+	/* For a hash failure, we don't bother re-enabling interrupts */
+	ble-	12f
+
+	/*
+	 * hash_page couldn't handle it, set soft interrupt enable back
+	 * to what it was before the trap.  Note that .raw_local_irq_restore
+	 * handles any interrupts pending at this point.
+	 */
+	ld	r3,SOFTE(r1)
+	TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
+	bl	.raw_local_irq_restore
+	b	11f
+
+/* Here we have a page fault that hash_page can't handle. */
+handle_page_fault:
+	ENABLE_INTS
+11:	ld	r4,_DAR(r1)
+	ld	r5,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.do_page_fault
+	cmpdi	r3,0
+	beq+	13f
+	bl	.save_nvgprs
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lwz	r4,_DAR(r1)
+	bl	.bad_page_fault
+	b	.ret_from_except
+
+13:	b	.ret_from_except_lite
+
+/* We have a page fault that hash_page could handle but HV refused
+ * the PTE insertion
+ */
+12:	bl	.save_nvgprs
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r4,_DAR(r1)
+	bl	.low_hash_fault
+	b	.ret_from_except
+
+	/* here we have a segment miss */
+do_ste_alloc:
+	bl	.ste_allocate		/* try to insert stab entry */
+	cmpdi	r3,0
+	bne-	handle_page_fault
+	b	fast_exception_return
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * r9 - r13 are saved in paca->exslb.
+ * We assume we aren't going to take any exceptions during this procedure.
+ * We assume (DAR >> 60) == 0xc.
+ */
+	.align	7
+_GLOBAL(do_stab_bolted)
+	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
+	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
+
+	/* Hash to the primary group */
+	ld	r10,PACASTABVIRT(r13)
+	mfspr	r11,SPRN_DAR
+	srdi	r11,r11,28
+	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
+
+	/* Calculate VSID */
+	/* This is a kernel address, so protovsid = ESID */
+	ASM_VSID_SCRAMBLE(r11, r9, 256M)
+	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
+
+	/* Search the primary group for a free entry */
+1:	ld	r11,0(r10)	/* Test valid bit of the current ste	*/
+	andi.	r11,r11,0x80
+	beq	2f
+	addi	r10,r10,16
+	andi.	r11,r10,0x70
+	bne	1b
+
+	/* Stick for only searching the primary group for now.		*/
+	/* At least for now, we use a very simple random castout scheme */
+	/* Use the TB as a random number ;  OR in 1 to avoid entry 0	*/
+	mftb	r11
+	rldic	r11,r11,4,57	/* r11 = (r11 << 4) & 0x70 */
+	ori	r11,r11,0x10
+
+	/* r10 currently points to an ste one past the group of interest */
+	/* make it point to the randomly selected entry			*/
+	subi	r10,r10,128
+	or 	r10,r10,r11	/* r10 is the entry to invalidate	*/
+
+	isync			/* mark the entry invalid		*/
+	ld	r11,0(r10)
+	rldicl	r11,r11,56,1	/* clear the valid bit */
+	rotldi	r11,r11,8
+	std	r11,0(r10)
+	sync
+
+	clrrdi	r11,r11,28	/* Get the esid part of the ste		*/
+	slbie	r11
+
+2:	std	r9,8(r10)	/* Store the vsid part of the ste	*/
+	eieio
+
+	mfspr	r11,SPRN_DAR		/* Get the new esid			*/
+	clrrdi	r11,r11,28	/* Permits a full 32b of ESID		*/
+	ori	r11,r11,0x90	/* Turn on valid and kp			*/
+	std	r11,0(r10)	/* Put new entry back into the stab	*/
+
+	sync
+
+	/* All done -- return from exception. */
+	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
+	ld	r11,PACA_EXSLB+EX_SRR0(r13)	/* get saved SRR0 */
+
+	andi.	r10,r12,MSR_RI
+	beq-	unrecov_slb
+
+	mtcrf	0x80,r9			/* restore CR */
+
+	mfmsr	r10
+	clrrdi	r10,r10,2
+	mtmsrd	r10,1
+
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	rfid
+	b	.	/* prevent speculative execution */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on).  The address is given to the hv
+ * as a page number (see xLparMap below), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+	. = STAB0_OFFSET	/* 0x6000 */
+	.globl initial_stab
+initial_stab:
+	.space	4096
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+	.= 0x7000
+	.globl fwnmi_data_area
+fwnmi_data_area:
+#endif /* CONFIG_PPC_PSERIES */
+
+	/* iSeries does not use the FWNMI stuff, so it is safe to put
+	 * this here, even if we later allow kernels that will boot on
+	 * both pSeries and iSeries */
+#ifdef CONFIG_PPC_ISERIES
+        . = LPARMAP_PHYS
+	.globl xLparMap
+xLparMap:
+	.quad	HvEsidsToMap		/* xNumberEsids */
+	.quad	HvRangesToMap		/* xNumberRanges */
+	.quad	STAB0_PAGE		/* xSegmentTableOffs */
+	.zero	40			/* xRsvd */
+	/* xEsids (HvEsidsToMap entries of 2 quads) */
+	.quad	PAGE_OFFSET_ESID	/* xKernelEsid */
+	.quad	PAGE_OFFSET_VSID	/* xKernelVsid */
+	.quad	VMALLOC_START_ESID	/* xKernelEsid */
+	.quad	VMALLOC_START_VSID	/* xKernelVsid */
+	/* xRanges (HvRangesToMap entries of 3 quads) */
+	.quad	HvPagesToMap		/* xPages */
+	.quad	0			/* xOffset */
+	.quad	PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT)	/* xVPN */
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_PSERIES
+        . = 0x8000
+#endif /* CONFIG_PPC_PSERIES */
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 2d182f119d1..1b12696cca0 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -23,25 +23,14 @@
 #include <asm/code-patching.h>
 #include <asm/ftrace.h>
 
-#ifdef CONFIG_PPC32
-# define GET_ADDR(addr) addr
-#else
-/* PowerPC64's functions are data that points to the functions */
-# define GET_ADDR(addr) (*(unsigned long *)addr)
-#endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-static unsigned int ftrace_nop_replace(void)
-{
-	return PPC_INST_NOP;
-}
-
 static unsigned int
 ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
 {
 	unsigned int op;
 
-	addr = GET_ADDR(addr);
+	addr = ppc_function_entry((void *)addr);
 
 	/* if (link) set op to 'bl' else 'b' */
 	op = create_branch((unsigned int *)ip, addr, link ? 1 : 0);
@@ -49,14 +38,6 @@ ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
 	return op;
 }
 
-#ifdef CONFIG_PPC64
-# define _ASM_ALIGN	" .align 3 "
-# define _ASM_PTR	" .llong "
-#else
-# define _ASM_ALIGN	" .align 2 "
-# define _ASM_PTR	" .long "
-#endif
-
 static int
 ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
 {
@@ -197,7 +178,7 @@ __ftrace_make_nop(struct module *mod,
 	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
 
 	/* This should match what was called */
-	if (ptr != GET_ADDR(addr)) {
+	if (ptr != ppc_function_entry((void *)addr)) {
 		printk(KERN_ERR "addr does not match %lx\n", ptr);
 		return -EINVAL;
 	}
@@ -328,7 +309,7 @@ int ftrace_make_nop(struct module *mod,
 	if (test_24bit_addr(ip, addr)) {
 		/* within range */
 		old = ftrace_call_replace(ip, addr, 1);
-		new = ftrace_nop_replace();
+		new = PPC_INST_NOP;
 		return ftrace_modify_code(ip, old, new);
 	}
 
@@ -466,7 +447,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	 */
 	if (test_24bit_addr(ip, addr)) {
 		/* within range */
-		old = ftrace_nop_replace();
+		old = PPC_INST_NOP;
 		new = ftrace_call_replace(ip, addr, 1);
 		return ftrace_modify_code(ip, old, new);
 	}
@@ -570,7 +551,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return_hooker = (unsigned long)&mod_return_to_handler;
 #endif
 
-	return_hooker = GET_ADDR(return_hooker);
+	return_hooker = ppc_function_entry((void *)return_hooker);
 
 	/*
 	 * Protect against fault, even if it shouldn't
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index c01467f952d..48469463f89 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -733,9 +733,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
 AltiVecUnavailable:
 	EXCEPTION_PROLOG
 #ifdef CONFIG_ALTIVEC
-	bne	load_up_altivec		/* if from user, just load it up */
+	beq	1f
+	bl	load_up_altivec		/* if from user, just load it up */
+	b	fast_exception_return
 #endif /* CONFIG_ALTIVEC */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
 
 PerformanceMonitor:
@@ -743,101 +745,6 @@ PerformanceMonitor:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_STD(0xf00, performance_monitor_exception)
 
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
-	tophys(r6,0)
-	addis	r3,r6,last_task_used_altivec@ha
-	lwz	r4,last_task_used_altivec@l(r3)
-	cmpwi	0,r4,0
-	beq	1f
-	add	r4,r4,r6
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VRS(0,r10,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10	/* disable altivec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of AltiVec after return */
-	oris	r9,r9,MSR_VEC@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
-	.globl	giveup_altivec
-giveup_altivec:
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-	cmpwi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
-	SAVE_32VRS(0, r4, r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable AltiVec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_altivec@ha
-	stw	r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_ALTIVEC */
 
 /*
  * This code is jumped to from the startup code to copy
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 50ef505b8fb..012505ebd9f 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -12,8 +12,9 @@
  *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
  *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
  *
- *  This file contains the low-level support and setup for the
- *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *  This file contains the entry point for the 64-bit kernel along
+ *  with some early initialization code common to all 64-bit powerpc
+ *  variants.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -38,36 +39,25 @@
 #include <asm/exception.h>
 #include <asm/irqflags.h>
 
-/*
- * We layout physical memory as follows:
- * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
- * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 -        : Early init and support code
- */
-
-/*
- *   SPRG Usage
- *
- *   Register	Definition
- *
- *   SPRG0	reserved for hypervisor
- *   SPRG1	temp - used to save gpr
- *   SPRG2	temp - used to save gpr
- *   SPRG3	virt addr of paca
+/* The physical memory is layed out such that the secondary processor
+ * spin code sits at 0x0000...0x00ff. On server, the vectors follow
+ * using the layout described in exceptions-64s.S
  */
 
 /*
  * Entering into this code we make the following assumptions:
- *  For pSeries:
+ *
+ *  For pSeries or server processors:
  *   1. The MMU is off & open firmware is running in real mode.
  *   2. The kernel is entered at __start
  *
  *  For iSeries:
  *   1. The MMU is on (as it always is for iSeries)
  *   2. The kernel is entered at system_reset_iSeries
+ *
+ *  For Book3E processors:
+ *   1. The MMU is on running in AS0 in a state defined in ePAPR
+ *   2. The kernel is entered at __start
  */
 
 	.text
@@ -166,1065 +156,14 @@ exception_marker:
 	.text
 
 /*
- * This is the start of the interrupt handlers for pSeries
- * This code runs with relocation off.
- * Code from here to __end_interrupts gets copied down to real
- * address 0x100 when we are running a relocatable kernel.
- * Therefore any relative branches in this section must only
- * branch to labels in this section.
- */
-	. = 0x100
-	.globl __start_interrupts
-__start_interrupts:
-
-	STD_EXCEPTION_PSERIES(0x100, system_reset)
-
-	. = 0x200
-_machine_check_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-	. = 0x300
-	.globl data_access_pSeries
-data_access_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG2,r12
-	mfspr	r13,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	srdi	r13,r13,60
-	rlwimi	r13,r12,16,0x20
-	mfcr	r12
-	cmpwi	r13,0x2c
-	beq	do_stab_bolted_pSeries
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-
-	. = 0x380
-	.globl data_access_slb_pSeries
-data_access_slb_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_DAR
-	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
-	mfcr	r9
-#ifdef __DISABLED__
-	/* Keep that around for when we re-implement dynamic VSIDs */
-	cmpdi	r3,0
-	bge	slb_miss_user_pseries
-#endif /* __DISABLED__ */
-	std	r10,PACA_EXSLB+EX_R10(r13)
-	std	r11,PACA_EXSLB+EX_R11(r13)
-	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
-	std	r10,PACA_EXSLB+EX_R13(r13)
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
-#else
-	/*
-	 * We can't just use a direct branch to .slb_miss_realmode
-	 * because the distance from here to there depends on where
-	 * the kernel ends up being put.
-	 */
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	STD_EXCEPTION_PSERIES(0x400, instruction_access)
-
-	. = 0x480
-	.globl instruction_access_slb_pSeries
-instruction_access_slb_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
-	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
-	mfcr	r9
-#ifdef __DISABLED__
-	/* Keep that around for when we re-implement dynamic VSIDs */
-	cmpdi	r3,0
-	bge	slb_miss_user_pseries
-#endif /* __DISABLED__ */
-	std	r10,PACA_EXSLB+EX_R10(r13)
-	std	r11,PACA_EXSLB+EX_R11(r13)
-	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
-	std	r10,PACA_EXSLB+EX_R13(r13)
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
-#else
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
-	STD_EXCEPTION_PSERIES(0x600, alignment)
-	STD_EXCEPTION_PSERIES(0x700, program_check)
-	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
-	MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
-	STD_EXCEPTION_PSERIES(0xa00, trap_0a)
-	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
-
-	. = 0xc00
-	.globl	system_call_pSeries
-system_call_pSeries:
-	HMT_MEDIUM
-BEGIN_FTR_SECTION
-	cmpdi	r0,0x1ebe
-	beq-	1f
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
-	mr	r9,r13
-	mfspr	r13,SPRN_SPRG3
-	mfspr	r11,SPRN_SRR0
-	ld	r12,PACAKBASE(r13)
-	ld	r10,PACAKMSR(r13)
-	LOAD_HANDLER(r12, system_call_entry)
-	mtspr	SPRN_SRR0,r12
-	mfspr	r12,SPRN_SRR1
-	mtspr	SPRN_SRR1,r10
-	rfid
-	b	.	/* prevent speculative execution */
-
-/* Fast LE/BE switch system call */
-1:	mfspr	r12,SPRN_SRR1
-	xori	r12,r12,MSR_LE
-	mtspr	SPRN_SRR1,r12
-	rfid		/* return to userspace */
-	b	.
-
-	STD_EXCEPTION_PSERIES(0xd00, single_step)
-	STD_EXCEPTION_PSERIES(0xe00, trap_0e)
-
-	/* We need to deal with the Altivec unavailable exception
-	 * here which is at 0xf20, thus in the middle of the
-	 * prolog code of the PerformanceMonitor one. A little
-	 * trickery is thus necessary
-	 */
-	. = 0xf00
-	b	performance_monitor_pSeries
-
-	. = 0xf20
-	b	altivec_unavailable_pSeries
-
-	. = 0xf40
-	b	vsx_unavailable_pSeries
-
-#ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
-#endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
-#ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
-#endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
-#ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
-#endif /* CONFIG_CBE_RAS */
-
-	. = 0x3000
-
-/*** pSeries interrupt support ***/
-
-	/* moved from 0xf00 */
-	STD_EXCEPTION_PSERIES(., performance_monitor)
-	STD_EXCEPTION_PSERIES(., altivec_unavailable)
-	STD_EXCEPTION_PSERIES(., vsx_unavailable)
-
-/*
- * An interrupt came in while soft-disabled; clear EE in SRR1,
- * clear paca->hard_enabled and return.
- */
-masked_interrupt:
-	stb	r10,PACAHARDIRQEN(r13)
-	mtcrf	0x80,r9
-	ld	r9,PACA_EXGEN+EX_R9(r13)
-	mfspr	r10,SPRN_SRR1
-	rldicl	r10,r10,48,1		/* clear MSR_EE */
-	rotldi	r10,r10,16
-	mtspr	SPRN_SRR1,r10
-	ld	r10,PACA_EXGEN+EX_R10(r13)
-	mfspr	r13,SPRN_SPRG1
-	rfid
-	b	.
-
-	.align	7
-do_stab_bolted_pSeries:
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
-	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Vectors for the FWNMI option.  Share common code.
- */
-	.globl system_reset_fwnmi
-      .align 7
-system_reset_fwnmi:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
-
-	.globl machine_check_fwnmi
-      .align 7
-machine_check_fwnmi:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-#endif /* CONFIG_PPC_PSERIES */
-
-#ifdef __DISABLED__
-/*
- * This is used for when the SLB miss handler has to go virtual,
- * which doesn't happen for now anymore but will once we re-implement
- * dynamic VSIDs for shared page tables
- */
-slb_miss_user_pseries:
-	std	r10,PACA_EXGEN+EX_R10(r13)
-	std	r11,PACA_EXGEN+EX_R11(r13)
-	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG1
-	ld	r11,PACA_EXSLB+EX_R9(r13)
-	ld	r12,PACA_EXSLB+EX_R3(r13)
-	std	r10,PACA_EXGEN+EX_R13(r13)
-	std	r11,PACA_EXGEN+EX_R9(r13)
-	std	r12,PACA_EXGEN+EX_R3(r13)
-	clrrdi	r12,r13,32
-	mfmsr	r10
-	mfspr	r11,SRR0			/* save SRR0 */
-	ori	r12,r12,slb_miss_user_common@l	/* virt addr of handler */
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
-	mtspr	SRR0,r12
-	mfspr	r12,SRR1			/* and SRR1 */
-	mtspr	SRR1,r10
-	rfid
-	b	.				/* prevent spec. execution */
-#endif /* __DISABLED__ */
-
-	.align	7
-	.globl	__end_interrupts
-__end_interrupts:
-
-/*
- * Code from here down to __end_handlers is invoked from the
- * exception prologs above.  Because the prologs assemble the
- * addresses of these handlers using the LOAD_HANDLER macro,
- * which uses an addi instruction, these handlers must be in
- * the first 32k of the kernel image.
- */
-
-/*** Common interrupt handlers ***/
-
-	STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
-
-	/*
-	 * Machine check is different because we use a different
-	 * save area: PACA_EXMC instead of PACA_EXGEN.
-	 */
-	.align	7
-	.globl machine_check_common
-machine_check_common:
-	EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
-	FINISH_NAP
-	DISABLE_INTS
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.machine_check_exception
-	b	.ret_from_except
-
-	STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
-	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
-	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
-	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
-	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
-#ifdef CONFIG_ALTIVEC
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
-#else
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
-#endif
-#ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
-	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
-	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
-#endif /* CONFIG_CBE_RAS */
-
-	.align	7
-system_call_entry:
-	b	system_call_common
-
-/*
- * Here we have detected that the kernel stack pointer is bad.
- * R9 contains the saved CR, r13 points to the paca,
- * r10 contains the (bad) kernel stack pointer,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * We switch to using an emergency stack, save the registers there,
- * and call kernel_bad_stack(), which panics.
- */
-bad_stack:
-	ld	r1,PACAEMERGSP(r13)
-	subi	r1,r1,64+INT_FRAME_SIZE
-	std	r9,_CCR(r1)
-	std	r10,GPR1(r1)
-	std	r11,_NIP(r1)
-	std	r12,_MSR(r1)
-	mfspr	r11,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	std	r11,_DAR(r1)
-	std	r12,_DSISR(r1)
-	mflr	r10
-	mfctr	r11
-	mfxer	r12
-	std	r10,_LINK(r1)
-	std	r11,_CTR(r1)
-	std	r12,_XER(r1)
-	SAVE_GPR(0,r1)
-	SAVE_GPR(2,r1)
-	SAVE_4GPRS(3,r1)
-	SAVE_2GPRS(7,r1)
-	SAVE_10GPRS(12,r1)
-	SAVE_10GPRS(22,r1)
-	lhz	r12,PACA_TRAP_SAVE(r13)
-	std	r12,_TRAP(r1)
-	addi	r11,r1,INT_FRAME_SIZE
-	std	r11,0(r1)
-	li	r12,0
-	std	r12,0(r11)
-	ld	r2,PACATOC(r13)
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.kernel_bad_stack
-	b	1b
-
-/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
- */
-	.align	7
-	.globl data_access_common
-data_access_common:
-	mfspr	r10,SPRN_DAR
-	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,SPRN_DSISR
-	stw	r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
-	ld	r3,PACA_EXGEN+EX_DAR(r13)
-	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
-	li	r5,0x300
-	b	.do_hash_page	 	/* Try to handle as hpte fault */
-
-	.align	7
-	.globl instruction_access_common
-instruction_access_common:
-	EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
-	ld	r3,_NIP(r1)
-	andis.	r4,r12,0x5820
-	li	r5,0x400
-	b	.do_hash_page		/* Try to handle as hpte fault */
-
-/*
- * Here is the common SLB miss user that is used when going to virtual
- * mode for SLB misses, that is currently not used
- */
-#ifdef __DISABLED__
-	.align	7
-	.globl	slb_miss_user_common
-slb_miss_user_common:
-	mflr	r10
-	std	r3,PACA_EXGEN+EX_DAR(r13)
-	stw	r9,PACA_EXGEN+EX_CCR(r13)
-	std	r10,PACA_EXGEN+EX_LR(r13)
-	std	r11,PACA_EXGEN+EX_SRR0(r13)
-	bl	.slb_allocate_user
-
-	ld	r10,PACA_EXGEN+EX_LR(r13)
-	ld	r3,PACA_EXGEN+EX_R3(r13)
-	lwz	r9,PACA_EXGEN+EX_CCR(r13)
-	ld	r11,PACA_EXGEN+EX_SRR0(r13)
-	mtlr	r10
-	beq-	slb_miss_fault
-
-	andi.	r10,r12,MSR_RI		/* check for unrecoverable exception */
-	beq-	unrecov_user_slb
-	mfmsr	r10
-
-.machine push
-.machine "power4"
-	mtcrf	0x80,r9
-.machine pop
-
-	clrrdi	r10,r10,2		/* clear RI before setting SRR0/1 */
-	mtmsrd	r10,1
-
-	mtspr	SRR0,r11
-	mtspr	SRR1,r12
-
-	ld	r9,PACA_EXGEN+EX_R9(r13)
-	ld	r10,PACA_EXGEN+EX_R10(r13)
-	ld	r11,PACA_EXGEN+EX_R11(r13)
-	ld	r12,PACA_EXGEN+EX_R12(r13)
-	ld	r13,PACA_EXGEN+EX_R13(r13)
-	rfid
-	b	.
-
-slb_miss_fault:
-	EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
-	ld	r4,PACA_EXGEN+EX_DAR(r13)
-	li	r5,0
-	std	r4,_DAR(r1)
-	std	r5,_DSISR(r1)
-	b	handle_page_fault
-
-unrecov_user_slb:
-	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
-	DISABLE_INTS
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-#endif /* __DISABLED__ */
-
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
-	mflr	r10
-#ifdef CONFIG_RELOCATABLE
-	mtctr	r11
-#endif
-
-	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
-	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
-
-	bl	.slb_allocate_realmode
-
-	/* All done -- return from exception. */
-
-	ld	r10,PACA_EXSLB+EX_LR(r13)
-	ld	r3,PACA_EXSLB+EX_R3(r13)
-	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	ld	r11,PACALPPACAPTR(r13)
-	ld	r11,LPPACASRR0(r11)		/* get SRR0 value */
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-
-	mtlr	r10
-
-	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
-	beq-	2f
-
-.machine	push
-.machine	"power4"
-	mtcrf	0x80,r9
-	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
-.machine	pop
-
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-	ld	r9,PACA_EXSLB+EX_R9(r13)
-	ld	r10,PACA_EXSLB+EX_R10(r13)
-	ld	r11,PACA_EXSLB+EX_R11(r13)
-	ld	r12,PACA_EXSLB+EX_R12(r13)
-	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
-	b	.	/* prevent speculative execution */
-
-2:
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	b	unrecov_slb
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-	mfspr	r11,SPRN_SRR0
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10,unrecov_slb)
-	mtspr	SPRN_SRR0,r10
-	ld	r10,PACAKMSR(r13)
-	mtspr	SPRN_SRR1,r10
-	rfid
-	b	.
-
-unrecov_slb:
-	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
-	DISABLE_INTS
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-	.align	7
-	.globl hardware_interrupt_common
-	.globl hardware_interrupt_entry
-hardware_interrupt_common:
-	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
-	FINISH_NAP
-hardware_interrupt_entry:
-	DISABLE_INTS
-BEGIN_FTR_SECTION
-	bl	.ppc64_runlatch_on
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_IRQ
-	b	.ret_from_except_lite
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
-	andc	r9,r9,r10
-	std	r9,TI_LOCAL_FLAGS(r11)
-	ld	r10,_LINK(r1)		/* make idle task do the */
-	std	r10,_NIP(r1)		/* equivalent of a blr */
-	blr
-#endif
-
-	.align	7
-	.globl alignment_common
-alignment_common:
-	mfspr	r10,SPRN_DAR
-	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,SPRN_DSISR
-	stw	r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
-	ld	r3,PACA_EXGEN+EX_DAR(r13)
-	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.alignment_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl program_check_common
-program_check_common:
-	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.program_check_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl fp_unavailable_common
-fp_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
-	bne	1f			/* if from user, just load it up */
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.kernel_fp_unavailable_exception
-	BUG_OPCODE
-1:	bl	.load_up_fpu
-	b	fast_exception_return
-
-	.align	7
-	.globl altivec_unavailable_common
-altivec_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	beq	1f
-	bl	.load_up_altivec
-	b	fast_exception_return
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.altivec_unavailable_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl vsx_unavailable_common
-vsx_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	bne	.load_up_vsx
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.vsx_unavailable_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl	__end_handlers
-__end_handlers:
-
-/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
+ * On server, we include the exception vectors code here as it
+ * relies on absolute addressing which is only possible within
+ * this compilation unit
  */
-fast_exc_return_irq:			/* restores irq state too */
-	ld	r3,SOFTE(r1)
-	TRACE_AND_RESTORE_IRQ(r3);
-	ld	r12,_MSR(r1)
-	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
-	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
-	b	1f
-
-	.globl	fast_exception_return
-fast_exception_return:
-	ld	r12,_MSR(r1)
-1:	ld	r11,_NIP(r1)
-	andi.	r3,r12,MSR_RI		/* check if RI is set */
-	beq-	unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	andi.	r3,r12,MSR_PR
-	beq	2f
-	ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
+#ifdef CONFIG_PPC_BOOK3S
+#include "exceptions-64s.S"
 #endif
 
-	ld	r3,_CCR(r1)
-	ld	r4,_LINK(r1)
-	ld	r5,_CTR(r1)
-	ld	r6,_XER(r1)
-	mtcr	r3
-	mtlr	r4
-	mtctr	r5
-	mtxer	r6
-	REST_GPR(0, r1)
-	REST_8GPRS(2, r1)
-
-	mfmsr	r10
-	rldicl	r10,r10,48,1		/* clear EE */
-	rldicr	r10,r10,16,61		/* clear RI (LE is 0 already) */
-	mtmsrd	r10,1
-
-	mtspr	SPRN_SRR1,r12
-	mtspr	SPRN_SRR0,r11
-	REST_4GPRS(10, r1)
-	ld	r1,GPR1(r1)
-	rfid
-	b	.	/* prevent speculative execution */
-
-unrecov_fer:
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-#ifdef CONFIG_ALTIVEC
-/*
- * load_up_altivec(unused, unused, tsk)
- * Disable VMX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- * On SMP we know the VMX is free, since we give it up every
- * switch (ie, no lazy save of the vector registers).
- * On entry: r13 == 'current' && last_task_used_altivec != 'current'
- */
-_STATIC(load_up_altivec)
-	mfmsr	r5			/* grab the current MSR */
-	oris	r5,r5,MSR_VEC@h
-	mtmsrd	r5			/* enable use of VMX now */
-	isync
-
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_altivec@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Save VMX state to last_task_used_altivec's THREAD struct */
-	addi	r4,r4,THREAD
-	SAVE_32VRS(0,r5,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	/* Disable VMX for last_task_used_altivec */
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VEC@h
-	andc	r4,r4,r6
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* Hack: if we get an altivec unavailable trap with VRSAVE
-	 * set to all zeros, we assume this is a broken application
-	 * that fails to set it properly, and thus we switch it to
-	 * all 1's
-	 */
-	mfspr	r4,SPRN_VRSAVE
-	cmpdi	0,r4,0
-	bne+	1f
-	li	r4,-1
-	mtspr	SPRN_VRSAVE,r4
-1:
-	/* enable use of VMX after return */
-	ld	r4,PACACURRENT(r13)
-	addi	r5,r4,THREAD		/* Get THREAD */
-	oris	r12,r12,MSR_VEC@h
-	std	r12,_MSR(r1)
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r4,r5)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
-	subi	r4,r5,THREAD		/* Back to 'current' */
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	blr
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * load_up_vsx(unused, unused, tsk)
- * Disable VSX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Reuse the fp and vsx saves, but first check to see if they have
- * been saved already.
- * On entry: r13 == 'current' && last_task_used_vsx != 'current'
- */
-_STATIC(load_up_vsx)
-/* Load FP and VSX registers if they haven't been done yet */
-	andi.	r5,r12,MSR_FP
-	beql+	load_up_fpu		/* skip if already loaded */
-	andis.	r5,r12,MSR_VEC@h
-	beql+	load_up_altivec		/* skip if already loaded */
-
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_vsx@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Disable VSX for last_task_used_vsx */
-	addi	r4,r4,THREAD
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VSX@h
-	andc	r6,r4,r6
-	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	ld	r4,PACACURRENT(r13)
-	addi	r4,r4,THREAD		/* Get THREAD */
-	li	r6,1
-	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
-	/* enable use of VSX after return */
-	oris	r12,r12,MSR_VSX@h
-	std	r12,_MSR(r1)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
-	ld	r4,PACACURRENT(r13)
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
-	b	fast_exception_return
-#endif /* CONFIG_VSX */
-
-/*
- * Hash table stuff
- */
-	.align	7
-_STATIC(do_hash_page)
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-
-	andis.	r0,r4,0xa450		/* weird error? */
-	bne-	handle_page_fault	/* if not, try to insert a HPTE */
-BEGIN_FTR_SECTION
-	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
-	bne-	do_ste_alloc		/* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-
-	/*
-	 * On iSeries, we soft-disable interrupts here, then
-	 * hard-enable interrupts so that the hash_page code can spin on
-	 * the hash_table_lock without problems on a shared processor.
-	 */
-	DISABLE_INTS
-
-	/*
-	 * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
-	 * and will clobber volatile registers when irq tracing is enabled
-	 * so we need to reload them. It may be possible to be smarter here
-	 * and move the irq tracing elsewhere but let's keep it simple for
-	 * now
-	 */
-#ifdef CONFIG_TRACE_IRQFLAGS
-	ld	r3,_DAR(r1)
-	ld	r4,_DSISR(r1)
-	ld	r5,_TRAP(r1)
-	ld	r12,_MSR(r1)
-	clrrdi	r5,r5,4
-#endif /* CONFIG_TRACE_IRQFLAGS */
-	/*
-	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
-	 * accessing a userspace segment (even from the kernel). We assume
-	 * kernel addresses always have the high bit set.
-	 */
-	rlwinm	r4,r4,32-25+9,31-9,31-9	/* DSISR_STORE -> _PAGE_RW */
-	rotldi	r0,r3,15		/* Move high bit into MSR_PR posn */
-	orc	r0,r12,r0		/* MSR_PR | ~high_bit */
-	rlwimi	r4,r0,32-13,30,30	/* becomes _PAGE_USER access bit */
-	ori	r4,r4,1			/* add _PAGE_PRESENT */
-	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
-
-	/*
-	 * r3 contains the faulting address
-	 * r4 contains the required access permissions
-	 * r5 contains the trap number
-	 *
-	 * at return r3 = 0 for success
-	 */
-	bl	.hash_page		/* build HPTE if possible */
-	cmpdi	r3,0			/* see if hash_page succeeded */
-
-BEGIN_FW_FTR_SECTION
-	/*
-	 * If we had interrupts soft-enabled at the point where the
-	 * DSI/ISI occurred, and an interrupt came in during hash_page,
-	 * handle it now.
-	 * We jump to ret_from_except_lite rather than fast_exception_return
-	 * because ret_from_except_lite will check for and handle pending
-	 * interrupts if necessary.
-	 */
-	beq	13f
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-BEGIN_FW_FTR_SECTION
-	/*
-	 * Here we have interrupts hard-disabled, so it is sufficient
-	 * to restore paca->{soft,hard}_enable and get out.
-	 */
-	beq	fast_exc_return_irq	/* Return from exception on success */
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-
-	/* For a hash failure, we don't bother re-enabling interrupts */
-	ble-	12f
-
-	/*
-	 * hash_page couldn't handle it, set soft interrupt enable back
-	 * to what it was before the trap.  Note that .raw_local_irq_restore
-	 * handles any interrupts pending at this point.
-	 */
-	ld	r3,SOFTE(r1)
-	TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
-	bl	.raw_local_irq_restore
-	b	11f
-
-/* Here we have a page fault that hash_page can't handle. */
-handle_page_fault:
-	ENABLE_INTS
-11:	ld	r4,_DAR(r1)
-	ld	r5,_DSISR(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_page_fault
-	cmpdi	r3,0
-	beq+	13f
-	bl	.save_nvgprs
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lwz	r4,_DAR(r1)
-	bl	.bad_page_fault
-	b	.ret_from_except
-
-13:	b	.ret_from_except_lite
-
-/* We have a page fault that hash_page could handle but HV refused
- * the PTE insertion
- */
-12:	bl	.save_nvgprs
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ld	r4,_DAR(r1)
-	bl	.low_hash_fault
-	b	.ret_from_except
-
-	/* here we have a segment miss */
-do_ste_alloc:
-	bl	.ste_allocate		/* try to insert stab entry */
-	cmpdi	r3,0
-	bne-	handle_page_fault
-	b	fast_exception_return
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r9 - r13 are saved in paca->exslb.
- * We assume we aren't going to take any exceptions during this procedure.
- * We assume (DAR >> 60) == 0xc.
- */
-	.align	7
-_GLOBAL(do_stab_bolted)
-	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
-	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
-
-	/* Hash to the primary group */
-	ld	r10,PACASTABVIRT(r13)
-	mfspr	r11,SPRN_DAR
-	srdi	r11,r11,28
-	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
-
-	/* Calculate VSID */
-	/* This is a kernel address, so protovsid = ESID */
-	ASM_VSID_SCRAMBLE(r11, r9, 256M)
-	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
-
-	/* Search the primary group for a free entry */
-1:	ld	r11,0(r10)	/* Test valid bit of the current ste	*/
-	andi.	r11,r11,0x80
-	beq	2f
-	addi	r10,r10,16
-	andi.	r11,r10,0x70
-	bne	1b
-
-	/* Stick for only searching the primary group for now.		*/
-	/* At least for now, we use a very simple random castout scheme */
-	/* Use the TB as a random number ;  OR in 1 to avoid entry 0	*/
-	mftb	r11
-	rldic	r11,r11,4,57	/* r11 = (r11 << 4) & 0x70 */
-	ori	r11,r11,0x10
-
-	/* r10 currently points to an ste one past the group of interest */
-	/* make it point to the randomly selected entry			*/
-	subi	r10,r10,128
-	or 	r10,r10,r11	/* r10 is the entry to invalidate	*/
-
-	isync			/* mark the entry invalid		*/
-	ld	r11,0(r10)
-	rldicl	r11,r11,56,1	/* clear the valid bit */
-	rotldi	r11,r11,8
-	std	r11,0(r10)
-	sync
-
-	clrrdi	r11,r11,28	/* Get the esid part of the ste		*/
-	slbie	r11
-
-2:	std	r9,8(r10)	/* Store the vsid part of the ste	*/
-	eieio
-
-	mfspr	r11,SPRN_DAR		/* Get the new esid			*/
-	clrrdi	r11,r11,28	/* Permits a full 32b of ESID		*/
-	ori	r11,r11,0x90	/* Turn on valid and kp			*/
-	std	r11,0(r10)	/* Put new entry back into the stab	*/
-
-	sync
-
-	/* All done -- return from exception. */
-	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-	ld	r11,PACA_EXSLB+EX_SRR0(r13)	/* get saved SRR0 */
-
-	andi.	r10,r12,MSR_RI
-	beq-	unrecov_slb
-
-	mtcrf	0x80,r9			/* restore CR */
-
-	mfmsr	r10
-	clrrdi	r10,r10,2
-	mtmsrd	r10,1
-
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-	ld	r9,PACA_EXSLB+EX_R9(r13)
-	ld	r10,PACA_EXSLB+EX_R10(r13)
-	ld	r11,PACA_EXSLB+EX_R11(r13)
-	ld	r12,PACA_EXSLB+EX_R12(r13)
-	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
-	b	.	/* prevent speculative execution */
-
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on).  The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
-	. = STAB0_OFFSET	/* 0x6000 */
-	.globl initial_stab
-initial_stab:
-	.space	4096
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
-	.= 0x7000
-	.globl fwnmi_data_area
-fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
-
-	/* iSeries does not use the FWNMI stuff, so it is safe to put
-	 * this here, even if we later allow kernels that will boot on
-	 * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
-        . = LPARMAP_PHYS
-	.globl xLparMap
-xLparMap:
-	.quad	HvEsidsToMap		/* xNumberEsids */
-	.quad	HvRangesToMap		/* xNumberRanges */
-	.quad	STAB0_PAGE		/* xSegmentTableOffs */
-	.zero	40			/* xRsvd */
-	/* xEsids (HvEsidsToMap entries of 2 quads) */
-	.quad	PAGE_OFFSET_ESID	/* xKernelEsid */
-	.quad	PAGE_OFFSET_VSID	/* xKernelVsid */
-	.quad	VMALLOC_START_ESID	/* xKernelEsid */
-	.quad	VMALLOC_START_VSID	/* xKernelVsid */
-	/* xRanges (HvRangesToMap entries of 3 quads) */
-	.quad	HvPagesToMap		/* xPages */
-	.quad	0			/* xOffset */
-	.quad	PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT)	/* xVPN */
-
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_PSERIES
-        . = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
 
 /*
  * On pSeries and most other platforms, secondary processors spin
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 95f39f1e68d..5f9febc8d14 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -256,7 +256,7 @@ label:
 	 * off DE in the DSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
+	andis.	r10,r10,(DBSR_IC|DBSR_BT)@h;				      \
 	beq+	2f;							      \
 									      \
 	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
@@ -271,7 +271,7 @@ label:
 									      \
 	/* here it looks like we got an inappropriate debug exception. */     \
 1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CDRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
+	lis	r10,(DBSR_IC|DBSR_BT)@h;	/* clear the IC event */      \
 	mtspr	SPRN_DBSR,r10;						      \
 	/* restore state and get out */					      \
 	lwz	r10,_CCR(r11);						      \
@@ -309,7 +309,7 @@ label:
 	 * off DE in the CSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
+	andis.	r10,r10,(DBSR_IC|DBSR_BT)@h;				      \
 	beq+	2f;							      \
 									      \
 	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
@@ -317,14 +317,14 @@ label:
 	cmplw	r12,r10;						      \
 	blt+	2f;			/* addr below exception vectors */    \
 									      \
-	lis	r10,DebugCrit@h;						      \
+	lis	r10,DebugCrit@h;					      \
 	ori	r10,r10,DebugCrit@l;					      \
 	cmplw	r12,r10;						      \
 	bgt+	2f;			/* addr above exception vectors */    \
 									      \
 	/* here it looks like we got an inappropriate debug exception. */     \
 1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CSRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
+	lis	r10,(DBSR_IC|DBSR_BT)@h;	/* clear the IC event */      \
 	mtspr	SPRN_DBSR,r10;						      \
 	/* restore state and get out */					      \
 	lwz	r10,_CCR(r11);						      \
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index feff792ed0f..f7f376ea7b1 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -53,6 +53,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
+#include <linux/perf_counter.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -117,6 +118,7 @@ notrace void raw_local_irq_restore(unsigned long en)
 	if (!en)
 		return;
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
 		/*
 		 * Do we need to disable preemption here?  Not really: in the
@@ -134,6 +136,7 @@ notrace void raw_local_irq_restore(unsigned long en)
 		if (local_paca->lppaca_ptr->int_dword.any_int)
 			iseries_handle_interrupts();
 	}
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 	if (test_perf_counter_pending()) {
 		clear_perf_counter_pending();
@@ -253,77 +256,84 @@ void fixup_irqs(cpumask_t map)
 }
 #endif
 
-void do_IRQ(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	unsigned int irq;
 #ifdef CONFIG_IRQSTACKS
+static inline void handle_one_irq(unsigned int irq)
+{
 	struct thread_info *curtp, *irqtp;
-#endif
+	unsigned long saved_sp_limit;
+	struct irq_desc *desc;
 
-	irq_enter();
+	/* Switch to the irq stack to handle this */
+	curtp = current_thread_info();
+	irqtp = hardirq_ctx[smp_processor_id()];
+
+	if (curtp == irqtp) {
+		/* We're already on the irq stack, just handle it */
+		generic_handle_irq(irq);
+		return;
+	}
+
+	desc = irq_desc + irq;
+	saved_sp_limit = current->thread.ksp_limit;
+
+	irqtp->task = curtp->task;
+	irqtp->flags = 0;
+
+	/* Copy the softirq bits in preempt_count so that the
+	 * softirq checks work in the hardirq context. */
+	irqtp->preempt_count = (irqtp->preempt_count & ~SOFTIRQ_MASK) |
+			       (curtp->preempt_count & SOFTIRQ_MASK);
+
+	current->thread.ksp_limit = (unsigned long)irqtp +
+		_ALIGN_UP(sizeof(struct thread_info), 16);
+
+	call_handle_irq(irq, desc, irqtp, desc->handle_irq);
+	current->thread.ksp_limit = saved_sp_limit;
+	irqtp->task = NULL;
+
+	/* Set any flag that may have been set on the
+	 * alternate stack
+	 */
+	if (irqtp->flags)
+		set_bits(irqtp->flags, &curtp->flags);
+}
+#else
+static inline void handle_one_irq(unsigned int irq)
+{
+	generic_handle_irq(irq);
+}
+#endif
 
+static inline void check_stack_overflow(void)
+{
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 2KB free? */
-	{
-		long sp;
+	long sp;
 
-		sp = __get_SP() & (THREAD_SIZE-1);
+	sp = __get_SP() & (THREAD_SIZE-1);
 
-		if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-				sp - sizeof(struct thread_info));
-			dump_stack();
-		}
+	/* check for stack overflow: is there less than 2KB free? */
+	if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
+		printk("do_IRQ: stack overflow: %ld\n",
+			sp - sizeof(struct thread_info));
+		dump_stack();
 	}
 #endif
+}
 
-	/*
-	 * Every platform is required to implement ppc_md.get_irq.
-	 * This function will either return an irq number or NO_IRQ to
-	 * indicate there are no more pending.
-	 * The value NO_IRQ_IGNORE is for buggy hardware and means that this
-	 * IRQ has already been handled. -- Tom
-	 */
-	irq = ppc_md.get_irq();
+void do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	unsigned int irq;
 
-	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
-#ifdef CONFIG_IRQSTACKS
-		/* Switch to the irq stack to handle this */
-		curtp = current_thread_info();
-		irqtp = hardirq_ctx[smp_processor_id()];
-		if (curtp != irqtp) {
-			struct irq_desc *desc = irq_desc + irq;
-			void *handler = desc->handle_irq;
-			unsigned long saved_sp_limit = current->thread.ksp_limit;
-			if (handler == NULL)
-				handler = &__do_IRQ;
-			irqtp->task = curtp->task;
-			irqtp->flags = 0;
-
-			/* Copy the softirq bits in preempt_count so that the
-			 * softirq checks work in the hardirq context.
-			 */
-			irqtp->preempt_count =
-				(irqtp->preempt_count & ~SOFTIRQ_MASK) |
-				(curtp->preempt_count & SOFTIRQ_MASK);
+	irq_enter();
 
-			current->thread.ksp_limit = (unsigned long)irqtp +
-				_ALIGN_UP(sizeof(struct thread_info), 16);
-			call_handle_irq(irq, desc, irqtp, handler);
-			current->thread.ksp_limit = saved_sp_limit;
-			irqtp->task = NULL;
+	check_stack_overflow();
 
+	irq = ppc_md.get_irq();
 
-			/* Set any flag that may have been set on the
-			 * alternate stack
-			 */
-			if (irqtp->flags)
-				set_bits(irqtp->flags, &curtp->flags);
-		} else
-#endif
-			generic_handle_irq(irq);
-	} else if (irq != NO_IRQ_IGNORE)
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE)
+		handle_one_irq(irq);
+	else if (irq != NO_IRQ_IGNORE)
 		/* That's not SMP safe ... but who cares ? */
 		ppc_spurious_interrupts++;
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 78b3f7840ad..2419cc706ff 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -169,6 +169,9 @@ struct hvcall_ppp_data {
 	u8	unallocated_weight;
 	u16	active_procs_in_pool;
 	u16	active_system_procs;
+	u16	phys_platform_procs;
+	u32	max_proc_cap_avail;
+	u32	entitled_proc_cap_avail;
 };
 
 /*
@@ -190,13 +193,18 @@ struct hvcall_ppp_data {
  *            XX - Unallocated Variable Processor Capacity Weight.
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
+ *  R8 (QQQQRRRRRRSSSSSS). if ibm,partition-performance-parameters-level >= 1
+ *	XXXX - Physical platform procs allocated to virtualization.
+ *	    XXXXXX - Max procs capacity % available to the partitions pool.
+ *	          XXXXXX - Entitled procs capacity % available to the
+ *			   partitions pool.
  */
 static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
-	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
 
-	rc = plpar_hcall(H_GET_PPP, retbuf);
+	rc = plpar_hcall9(H_GET_PPP, retbuf);
 
 	ppp_data->entitlement = retbuf[0];
 	ppp_data->unallocated_entitlement = retbuf[1];
@@ -210,6 +218,10 @@ static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
 	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
+	ppp_data->phys_platform_procs = retbuf[4] >> 6 * 8;
+	ppp_data->max_proc_cap_avail = (retbuf[4] >> 3 * 8) & 0xffffff;
+	ppp_data->entitled_proc_cap_avail = retbuf[4] & 0xffffff;
+
 	return rc;
 }
 
@@ -234,6 +246,8 @@ static unsigned h_pic(unsigned long *pool_idle_time,
 static void parse_ppp_data(struct seq_file *m)
 {
 	struct hvcall_ppp_data ppp_data;
+	struct device_node *root;
+	const int *perf_level;
 	int rc;
 
 	rc = h_get_ppp(&ppp_data);
@@ -267,6 +281,28 @@ static void parse_ppp_data(struct seq_file *m)
 	seq_printf(m, "capped=%d\n", ppp_data.capped);
 	seq_printf(m, "unallocated_capacity=%lld\n",
 		   ppp_data.unallocated_entitlement);
+
+	/* The last bits of information returned from h_get_ppp are only
+	 * valid if the ibm,partition-performance-parameters-level
+	 * property is >= 1.
+	 */
+	root = of_find_node_by_path("/");
+	if (root) {
+		perf_level = of_get_property(root,
+				"ibm,partition-performance-parameters-level",
+					     NULL);
+		if (perf_level && (*perf_level >= 1)) {
+			seq_printf(m,
+			    "physical_procs_allocated_to_virtualization=%d\n",
+				   ppp_data.phys_platform_procs);
+			seq_printf(m, "max_proc_capacity_available=%d\n",
+				   ppp_data.max_proc_cap_avail);
+			seq_printf(m, "entitled_proc_capacity_available=%d\n",
+				   ppp_data.entitled_proc_cap_avail);
+		}
+
+		of_node_put(root);
+	}
 }
 
 /**
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index b9530b2395a..a5cf9c1356a 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -457,98 +457,6 @@ _GLOBAL(disable_kernel_fp)
 	isync
 	blr
 
-#ifdef CONFIG_ALTIVEC
-
-#if 0 /* this has no callers for now */
-/*
- * disable_kernel_altivec()
- * Disable the VMX.
- */
-_GLOBAL(disable_kernel_altivec)
-	mfmsr	r3
-	rldicl	r0,r3,(63-MSR_VEC_LG),1
-	rldicl	r3,r0,(MSR_VEC_LG+1),0
-	mtmsrd	r3			/* disable use of VMX now */
-	isync
-	blr
-#endif /* 0 */
-
-/*
- * giveup_altivec(tsk)
- * Disable VMX for the task given as the argument,
- * and save the vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- */
-_GLOBAL(giveup_altivec)
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	mtmsrd	r5			/* enable use of VMX now */
-	isync
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	SAVE_32VRS(0,r4,r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	lis	r3,(MSR_VEC|MSR_VSX)@h
-FTR_SECTION_ELSE
-	lis	r3,MSR_VEC@h
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
-#else
-	lis	r3,MSR_VEC@h
-#endif
-	andc	r4,r4,r3		/* disable FP for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_altivec@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * __giveup_vsx(tsk)
- * Disable VSX for the task given as the argument.
- * Does NOT save vsx registers.
- * Enables the VSX for use in the kernel on return.
- */
-_GLOBAL(__giveup_vsx)
-	mfmsr	r5
-	oris	r5,r5,MSR_VSX@h
-	mtmsrd	r5			/* enable use of VSX now */
-	isync
-
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VSX@h
-	andc	r4,r4,r3		/* disable VSX for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_vsx@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
-#endif /* CONFIG_VSX */
-
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 43e7e3a7f13..477c663e014 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -43,8 +43,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index c744b327bca..e9962c7f8a0 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -18,6 +18,8 @@
  * field correctly */
 extern unsigned long __toc_start;
 
+#ifdef CONFIG_PPC_BOOK3S
+
 /*
  * The structure which the hypervisor knows about - this structure
  * should not cross a page boundary.  The vpa_init/register_vpa call
@@ -41,6 +43,10 @@ struct lppaca lppaca[] = {
 	},
 };
 
+#endif /* CONFIG_PPC_BOOK3S */
+
+#ifdef CONFIG_PPC_STD_MMU_64
+
 /*
  * 3 persistent SLBs are registered here.  The buffer will be zero
  * initially, hence will all be invaild until we actually write them.
@@ -52,6 +58,8 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
 	},
 };
 
+#endif /* CONFIG_PPC_STD_MMU_64 */
+
 /* The Paca is an array with one entry per processor.  Each contains an
  * lppaca, which contains the information shared between the
  * hypervisor and Linux.
@@ -77,15 +85,19 @@ void __init initialise_pacas(void)
 	for (cpu = 0; cpu < NR_CPUS; cpu++) {
 		struct paca_struct *new_paca = &paca[cpu];
 
+#ifdef CONFIG_PPC_BOOK3S
 		new_paca->lppaca_ptr = &lppaca[cpu];
+#endif
 		new_paca->lock_token = 0x8000;
 		new_paca->paca_index = cpu;
 		new_paca->kernel_toc = kernel_toc;
 		new_paca->kernelbase = (unsigned long) _stext;
 		new_paca->kernel_msr = MSR_KERNEL;
 		new_paca->hw_cpu_id = 0xffff;
-		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 		new_paca->__current = &init_task;
+#ifdef CONFIG_PPC_STD_MMU_64
+		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 	}
 }
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 4fee63cb53f..5a56e97c5ac 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1505,7 +1505,7 @@ void __init pcibios_resource_survey(void)
  * rest of the code later, for now, keep it as-is as our main
  * resource allocation function doesn't deal with sub-trees yet.
  */
-void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+void pcibios_claim_one_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 	struct pci_bus *child_bus;
@@ -1533,7 +1533,6 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
 	list_for_each_entry(child_bus, &bus->children, node)
 		pcibios_claim_one_bus(child_bus);
 }
-EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
 
 
 /* pcibios_finish_adding_to_bus
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index d473634e39e..3ae1c666ff9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -33,7 +33,6 @@ int pcibios_assign_bus_offset = 1;
 
 void pcibios_make_OF_bus_map(void);
 
-static void fixup_broken_pcnet32(struct pci_dev* dev);
 static void fixup_cpc710_pci64(struct pci_dev* dev);
 #ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
@@ -72,16 +71,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_res
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); 
 
 static void
-fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,	PCI_ANY_ID,			fixup_broken_pcnet32);
-
-static void
 fixup_cpc710_pci64(struct pci_dev* dev)
 {
 	/* Hide the PCI64 BARs from the kernel as their content doesn't
@@ -447,14 +436,6 @@ static int __init pcibios_init(void)
 
 subsys_initcall(pcibios_init);
 
-/* the next one is stolen from the alpha port... */
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-	/* XXX FIXME - update OF device tree node interrupt property */
-}
-
 static struct pci_controller*
 pci_bus_to_hose(int bus)
 {
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 96edb6f8bab..9e8902fa14c 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,16 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-static void fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
-
-
 static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 {
 	const u32 *prop;
@@ -430,6 +420,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	 * so flushing the hash table is the only sane way to make sure
 	 * that no hash entries are covering that removed bridge area
 	 * while still allowing other busses overlapping those pages
+	 *
+	 * Note: If we ever support P2P hotplug on Book3E, we'll have
+	 * to do an appropriate TLB flush here too
 	 */
 	if (bus->self) {
 		struct resource *res = bus->resource[0];
@@ -437,8 +430,10 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 		pr_debug("IO unmapping for PCI-PCI bridge %s\n",
 			 pci_name(bus->self));
 
+#ifdef CONFIG_PPC_STD_MMU_64
 		__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
 					 res->end + _IO_BASE + 1);
+#endif
 		return 0;
 	}
 
@@ -511,7 +506,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 	pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
 	pr_debug("  phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
 		 hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
-	pr_debug("  size=0x%016lx (alloc=0x%016lx)\n",
+	pr_debug("  size=0x%016llx (alloc=0x%016lx)\n",
 		 hose->pci_io_size, size_page);
 
 	/* Establish the mapping */
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 1c67de52e3c..d5e36e5dc7c 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -27,7 +27,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
-#include <asm/pSeries_reconfig.h>
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
 
@@ -35,7 +34,7 @@
  * Traverse_func that inits the PCI fields of the device node.
  * NOTE: this *must* be done before read/write config to the device.
  */
-static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
+void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 {
 	struct pci_controller *phb = data;
 	const int *type =
@@ -184,29 +183,6 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(fetch_dev_dn);
 
-static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
-	struct device_node *np = node;
-	struct pci_dn *pci = NULL;
-	int err = NOTIFY_OK;
-
-	switch (action) {
-	case PSERIES_RECONFIG_ADD:
-		pci = np->parent->data;
-		if (pci)
-			update_dn_pci_info(np, pci->phb);
-		break;
-	default:
-		err = NOTIFY_DONE;
-		break;
-	}
-	return err;
-}
-
-static struct notifier_block pci_dn_reconfig_nb = {
-	.notifier_call = pci_dn_reconfig_notifier,
-};
-
 /** 
  * pci_devs_phb_init - Initialize phbs and pci devs under them.
  * 
@@ -223,6 +199,4 @@ void __init pci_devs_phb_init(void)
 	/* This must be done first so the device nodes have valid pci info! */
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		pci_devs_phb_init_dynamic(phb);
-
-	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
 }
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index b3f7d1216ba..b72e7a19d05 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -294,12 +294,12 @@ static void power7_disable_pmc(unsigned int pmc, u64 mmcr[])
 }
 
 static int power7_generic_events[] = {
-	[PERF_COUNT_CPU_CYCLES] = 0x1e,
-	[PERF_COUNT_INSTRUCTIONS] = 2,
-	[PERF_COUNT_CACHE_REFERENCES] = 0xc880,		/* LD_REF_L1_LSU */
-	[PERF_COUNT_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1 */
-	[PERF_COUNT_BRANCH_INSTRUCTIONS] = 0x10068,	/* BRU_FIN */
-	[PERF_COUNT_BRANCH_MISSES] = 0x400f6,		/* BR_MPRED */
+	[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880,	/* LD_REF_L1_LSU*/
+	[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1	*/
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068,	/* BRU_FIN	*/
+	[PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6,	/* BR_MPRED	*/
 };
 
 #define C(x)	PERF_COUNT_HW_CACHE_##x
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7b44a33f03c..3e7135bbe40 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -650,7 +650,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.ksp_limit = (unsigned long)task_stack_page(p) +
 				_ALIGN_UP(sizeof(struct thread_info), 16);
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (cpu_has_feature(CPU_FTR_SLB)) {
 		unsigned long sp_vsid;
 		unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index ce01ff2474d..d4405b95bfa 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -585,7 +585,7 @@ static void __init check_cpu_pa_features(unsigned long node)
 		      ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
 static void __init check_cpu_slb_size(unsigned long node)
 {
 	u32 *slb_size_ptr;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 3635be61f89..9fa2c7dcd05 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -704,15 +704,34 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+		task->thread.dbcr0 &= ~DBCR0_BT;
 		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
+		regs->msr &= ~MSR_BE;
 		regs->msr |= MSR_SE;
 #endif
 	}
 	set_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
+void user_enable_block_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+		task->thread.dbcr0 &= ~DBCR0_IC;
+		task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
+		regs->msr |= MSR_DE;
+#else
+		regs->msr &= ~MSR_SE;
+		regs->msr |= MSR_BE;
+#endif
+	}
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
 void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
@@ -726,10 +745,10 @@ void user_disable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
-		regs->msr &= ~MSR_SE;
+		regs->msr &= ~(MSR_SE | MSR_BE);
 #endif
 	}
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 8869001ab5d..54e66da8f74 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -93,10 +93,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 {
 	struct device_node *busdn, *dn;
 
-	if (bus->self)
-		busdn = pci_device_to_OF_node(bus->self);
-	else
-		busdn = bus->sysdata;	/* must be a phb */
+	busdn = pci_bus_to_OF_node(bus);
 
 	/* Search only direct children of the bus */
 	for (dn = busdn->child; dn; dn = dn->sibling) {
@@ -140,10 +137,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 {
 	struct device_node *busdn, *dn;
 
-	if (bus->self)
-		busdn = pci_device_to_OF_node(bus->self);
-	else
-		busdn = bus->sysdata;	/* must be a phb */
+	busdn = pci_bus_to_OF_node(bus);
 
 	/* Search only direct children of the bus */
 	for (dn = busdn->child; dn; dn = dn->sibling) {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 9e1ca745d8f..1d154248cf4 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,6 +39,7 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
+#include <asm/swiotlb.h>
 
 #include "setup.h"
 
@@ -332,6 +333,11 @@ void __init setup_arch(char **cmdline_p)
 		ppc_md.setup_arch();
 	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
+#ifdef CONFIG_SWIOTLB
+	if (ppc_swiotlb_enable)
+		swiotlb_init();
+#endif
+
 	paging_init();
 
 	/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index c410c606955..1f6816003eb 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -61,6 +61,7 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
+#include <asm/swiotlb.h>
 
 #include "setup.h"
 
@@ -417,12 +418,14 @@ void __init setup_system(void)
 	if (ppc64_caches.iline_size != 0x80)
 		printk("ppc64_caches.icache_line_size = 0x%x\n",
 		       ppc64_caches.iline_size);
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (htab_address)
 		printk("htab_address                  = 0x%p\n", htab_address);
 	printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
+#endif /* CONFIG_PPC_STD_MMU_64 */
 	if (PHYSICAL_START > 0)
-		printk("physical_start                = 0x%lx\n",
-		       PHYSICAL_START);
+		printk("physical_start                = 0x%llx\n",
+		       (unsigned long long)PHYSICAL_START);
 	printk("-----------------------------------------------------\n");
 
 	DBG(" <- setup_system()\n");
@@ -511,8 +514,9 @@ void __init setup_arch(char **cmdline_p)
 	irqstack_early_init();
 	emergency_stack_init();
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	stabs_alloc();
-
+#endif
 	/* set up the bootmem stuff with available memory */
 	do_init_bootmem();
 	sparse_init();
@@ -524,6 +528,11 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
+#ifdef CONFIG_SWIOTLB
+	if (ppc_swiotlb_enable)
+		swiotlb_init();
+#endif
+
 	paging_init();
 	ppc64_boot_msg(0x15, "Setup Done");
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 48571ac56fb..15391c2ab01 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -52,6 +52,7 @@
 #include <linux/jiffies.h>
 #include <linux/posix-timers.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -109,7 +110,7 @@ static void decrementer_set_mode(enum clock_event_mode mode,
 static struct clock_event_device decrementer_clockevent = {
        .name           = "decrementer",
        .rating         = 200,
-       .shift          = 16,
+       .shift          = 0,	/* To be filled in */
        .mult           = 0,	/* To be filled in */
        .irq            = 0,
        .set_next_event = decrementer_set_next_event,
@@ -843,6 +844,22 @@ static void decrementer_set_mode(enum clock_event_mode mode,
 		decrementer_set_next_event(DECREMENTER_MAX, dev);
 }
 
+static void __init setup_clockevent_multiplier(unsigned long hz)
+{
+	u64 mult, shift = 32;
+
+	while (1) {
+		mult = div_sc(hz, NSEC_PER_SEC, shift);
+		if (mult && (mult >> 32UL) == 0UL)
+			break;
+
+		shift--;
+	}
+
+	decrementer_clockevent.shift = shift;
+	decrementer_clockevent.mult = mult;
+}
+
 static void register_decrementer_clockevent(int cpu)
 {
 	struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
@@ -860,8 +877,7 @@ static void __init init_decrementer_clockevent(void)
 {
 	int cpu = smp_processor_id();
 
-	decrementer_clockevent.mult = div_sc(ppc_tb_freq, NSEC_PER_SEC,
-					     decrementer_clockevent.shift);
+	setup_clockevent_multiplier(ppc_tb_freq);
 	decrementer_clockevent.max_delta_ns =
 		clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
 	decrementer_clockevent.min_delta_ns =
@@ -1128,6 +1144,15 @@ void div128_by_32(u64 dividend_high, u64 dividend_low,
 
 }
 
+/* We don't need to calibrate delay, we use the CPU timebase for that */
+void calibrate_delay(void)
+{
+	/* Some generic code (such as spinlock debug) use loops_per_jiffy
+	 * as the number of __delay(1) in a jiffy, so make it so
+	 */
+	loops_per_jiffy = tb_ticks_per_jiffy;
+}
+
 static int __init rtc_init(void)
 {
 	struct platform_device *pdev;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 678fbff0d20..6f0ae1a9bfa 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -33,7 +33,9 @@
 #include <linux/backlight.h>
 #include <linux/bug.h>
 #include <linux/kdebug.h>
+#include <linux/debugfs.h>
 
+#include <asm/emulated_ops.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -757,36 +759,44 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulate the mfspr rD, PVR. */
 	if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
+		PPC_WARN_EMULATED(mfpvr);
 		rd = (instword >> 21) & 0x1f;
 		regs->gpr[rd] = mfspr(SPRN_PVR);
 		return 0;
 	}
 
 	/* Emulating the dcba insn is just a no-op.  */
-	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA)
+	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) {
+		PPC_WARN_EMULATED(dcba);
 		return 0;
+	}
 
 	/* Emulate the mcrxr insn.  */
 	if ((instword & PPC_INST_MCRXR_MASK) == PPC_INST_MCRXR) {
 		int shift = (instword >> 21) & 0x1c;
 		unsigned long msk = 0xf0000000UL >> shift;
 
+		PPC_WARN_EMULATED(mcrxr);
 		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
 		regs->xer &= ~0xf0000000UL;
 		return 0;
 	}
 
 	/* Emulate load/store string insn. */
-	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING)
+	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
+		PPC_WARN_EMULATED(string);
 		return emulate_string_inst(regs, instword);
+	}
 
 	/* Emulate the popcntb (Population Count Bytes) instruction. */
 	if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
+		PPC_WARN_EMULATED(popcntb);
 		return emulate_popcntb_inst(regs, instword);
 	}
 
 	/* Emulate isel (Integer Select) instruction */
 	if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
+		PPC_WARN_EMULATED(isel);
 		return emulate_isel(regs, instword);
 	}
 
@@ -984,6 +994,8 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #ifdef CONFIG_MATH_EMULATION
 	errcode = do_mathemu(regs);
+	if (errcode >= 0)
+		PPC_WARN_EMULATED(math);
 
 	switch (errcode) {
 	case 0:
@@ -1005,6 +1017,9 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #elif defined(CONFIG_8XX_MINIMAL_FPEMU)
 	errcode = Soft_emulate_8xx(regs);
+	if (errcode >= 0)
+		PPC_WARN_EMULATED(8xx);
+
 	switch (errcode) {
 	case 0:
 		emulate_single_step(regs);
@@ -1026,7 +1041,34 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
-	if (debug_status & DBSR_IC) {	/* instruction completion */
+	/* Hack alert: On BookE, Branch Taken stops on the branch itself, while
+	 * on server, it stops on the target of the branch. In order to simulate
+	 * the server behaviour, we thus restart right away with a single step
+	 * instead of stopping here when hitting a BT
+	 */
+	if (debug_status & DBSR_BT) {
+		regs->msr &= ~MSR_DE;
+
+		/* Disable BT */
+		mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_BT);
+		/* Clear the BT event */
+		mtspr(SPRN_DBSR, DBSR_BT);
+
+		/* Do the single step trick only when coming from userspace */
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~DBCR0_BT;
+			current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+			regs->msr |= MSR_DE;
+			return;
+		}
+
+		if (notify_die(DIE_SSTEP, "block_step", regs, 5,
+			       5, SIGTRAP) == NOTIFY_STOP) {
+			return;
+		}
+		if (debugger_sstep(regs))
+			return;
+	} else if (debug_status & DBSR_IC) { 	/* Instruction complete */
 		regs->msr &= ~MSR_DE;
 
 		/* Disable instruction completion */
@@ -1042,9 +1084,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		if (debugger_sstep(regs))
 			return;
 
-		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-		}
+		if (user_mode(regs))
+			current->thread.dbcr0 &= ~(DBCR0_IC);
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
 	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
@@ -1088,6 +1129,7 @@ void altivec_assist_exception(struct pt_regs *regs)
 
 	flush_altivec_to_thread(current);
 
+	PPC_WARN_EMULATED(altivec);
 	err = emulate_altivec(regs);
 	if (err == 0) {
 		regs->nip += 4;		/* skip emulated instruction */
@@ -1286,3 +1328,79 @@ void kernel_bad_stack(struct pt_regs *regs)
 void __init trap_init(void)
 {
 }
+
+
+#ifdef CONFIG_PPC_EMULATED_STATS
+
+#define WARN_EMULATED_SETUP(type)	.type = { .name = #type }
+
+struct ppc_emulated ppc_emulated = {
+#ifdef CONFIG_ALTIVEC
+	WARN_EMULATED_SETUP(altivec),
+#endif
+	WARN_EMULATED_SETUP(dcba),
+	WARN_EMULATED_SETUP(dcbz),
+	WARN_EMULATED_SETUP(fp_pair),
+	WARN_EMULATED_SETUP(isel),
+	WARN_EMULATED_SETUP(mcrxr),
+	WARN_EMULATED_SETUP(mfpvr),
+	WARN_EMULATED_SETUP(multiple),
+	WARN_EMULATED_SETUP(popcntb),
+	WARN_EMULATED_SETUP(spe),
+	WARN_EMULATED_SETUP(string),
+	WARN_EMULATED_SETUP(unaligned),
+#ifdef CONFIG_MATH_EMULATION
+	WARN_EMULATED_SETUP(math),
+#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
+	WARN_EMULATED_SETUP(8xx),
+#endif
+#ifdef CONFIG_VSX
+	WARN_EMULATED_SETUP(vsx),
+#endif
+};
+
+u32 ppc_warn_emulated;
+
+void ppc_warn_emulated_print(const char *type)
+{
+	if (printk_ratelimit())
+		pr_warning("%s used emulated %s instruction\n", current->comm,
+			   type);
+}
+
+static int __init ppc_warn_emulated_init(void)
+{
+	struct dentry *dir, *d;
+	unsigned int i;
+	struct ppc_emulated_entry *entries = (void *)&ppc_emulated;
+
+	if (!powerpc_debugfs_root)
+		return -ENODEV;
+
+	dir = debugfs_create_dir("emulated_instructions",
+				 powerpc_debugfs_root);
+	if (!dir)
+		return -ENOMEM;
+
+	d = debugfs_create_u32("do_warn", S_IRUGO | S_IWUSR, dir,
+			       &ppc_warn_emulated);
+	if (!d)
+		goto fail;
+
+	for (i = 0; i < sizeof(ppc_emulated)/sizeof(*entries); i++) {
+		d = debugfs_create_u32(entries[i].name, S_IRUGO | S_IWUSR, dir,
+				       (u32 *)&entries[i].val.counter);
+		if (!d)
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	debugfs_remove_recursive(dir);
+	return -ENOMEM;
+}
+
+device_initcall(ppc_warn_emulated_init);
+
+#endif /* CONFIG_PPC_EMULATED_STATS */
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 49ac3d6e139..ef36cbbc588 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -1,5 +1,215 @@
+#include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+/*
+ * load_up_altivec(unused, unused, tsk)
+ * Disable VMX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ * On SMP we know the VMX is free, since we give it up every
+ * switch (ie, no lazy save of the vector registers).
+ */
+_GLOBAL(load_up_altivec)
+	mfmsr	r5			/* grab the current MSR */
+	oris	r5,r5,MSR_VEC@h
+	MTMSRD(r5)			/* enable use of AltiVec now */
+	isync
+
+/*
+ * For SMP, we don't do lazy VMX switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_altvec in switch_to.
+ * VRSAVE isn't dealt with here, that is done in the normal context
+ * switch code. Note that we could rely on vrsave value to eventually
+ * avoid saving all of the VREGs here...
+ */
+#ifndef CONFIG_SMP
+	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
+	toreal(r3)
+	PPC_LL	r4,ADDROFF(last_task_used_altivec)(r3)
+	PPC_LCMPI	0,r4,0
+	beq	1f
+
+	/* Save VMX state to last_task_used_altivec's THREAD struct */
+	toreal(r4)
+	addi	r4,r4,THREAD
+	SAVE_32VRS(0,r5,r4)
+	mfvscr	vr0
+	li	r10,THREAD_VSCR
+	stvx	vr0,r10,r4
+	/* Disable VMX for last_task_used_altivec */
+	PPC_LL	r5,PT_REGS(r4)
+	toreal(r5)
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r10,MSR_VEC@h
+	andc	r4,r4,r10
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+
+	/* Hack: if we get an altivec unavailable trap with VRSAVE
+	 * set to all zeros, we assume this is a broken application
+	 * that fails to set it properly, and thus we switch it to
+	 * all 1's
+	 */
+	mfspr	r4,SPRN_VRSAVE
+	cmpdi	0,r4,0
+	bne+	1f
+	li	r4,-1
+	mtspr	SPRN_VRSAVE,r4
+1:
+	/* enable use of VMX after return */
+#ifdef CONFIG_PPC32
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	oris	r9,r9,MSR_VEC@h
+#else
+	ld	r4,PACACURRENT(r13)
+	addi	r5,r4,THREAD		/* Get THREAD */
+	oris	r12,r12,MSR_VEC@h
+	std	r12,_MSR(r1)
+#endif
+	li	r4,1
+	li	r10,THREAD_VSCR
+	stw	r4,THREAD_USED_VR(r5)
+	lvx	vr0,r10,r5
+	mtvscr	vr0
+	REST_32VRS(0,r4,r5)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	subi	r4,r5,THREAD		/* Back to 'current' */
+	fromreal(r4)
+	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+	blr
+
+/*
+ * giveup_altivec(tsk)
+ * Disable VMX for the task given as the argument,
+ * and save the vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ */
+_GLOBAL(giveup_altivec)
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	SYNC
+	MTMSRD(r5)			/* enable use of VMX now */
+	isync
+	PPC_LCMPI	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	PPC_LL	r5,PT_REGS(r3)
+	PPC_LCMPI	0,r5,0
+	SAVE_32VRS(0,r4,r3)
+	mfvscr	vr0
+	li	r4,THREAD_VSCR
+	stvx	vr0,r4,r3
+	beq	1f
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	lis	r3,(MSR_VEC|MSR_VSX)@h
+FTR_SECTION_ELSE
+	lis	r3,MSR_VEC@h
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
+#else
+	lis	r3,MSR_VEC@h
+#endif
+	andc	r4,r4,r3		/* disable FP for previous task */
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
+	PPC_STL	r5,ADDROFF(last_task_used_altivec)(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#ifdef CONFIG_VSX
+
+#ifdef CONFIG_PPC32
+#error This asm code isn't ready for 32-bit kernels
+#endif
+
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ */
+_GLOBAL(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+	andi.	r5,r12,MSR_FP
+	beql+	load_up_fpu		/* skip if already loaded */
+	andis.	r5,r12,MSR_VEC@h
+	beql+	load_up_altivec		/* skip if already loaded */
+
+#ifndef CONFIG_SMP
+	ld	r3,last_task_used_vsx@got(r2)
+	ld	r4,0(r3)
+	cmpdi	0,r4,0
+	beq	1f
+	/* Disable VSX for last_task_used_vsx */
+	addi	r4,r4,THREAD
+	ld	r5,PT_REGS(r4)
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r6,MSR_VSX@h
+	andc	r6,r4,r6
+	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	ld	r4,PACACURRENT(r13)
+	addi	r4,r4,THREAD		/* Get THREAD */
+	li	r6,1
+	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+	/* enable use of VSX after return */
+	oris	r12,r12,MSR_VSX@h
+	std	r12,_MSR(r1)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	ld	r4,PACACURRENT(r13)
+	std	r4,0(r3)
+#endif /* CONFIG_SMP */
+	b	fast_exception_return
+
+/*
+ * __giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument.
+ * Does NOT save vsx registers.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(__giveup_vsx)
+	mfmsr	r5
+	oris	r5,r5,MSR_VSX@h
+	mtmsrd	r5			/* enable use of VSX now */
+	isync
+
+	cmpdi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	ld	r5,PT_REGS(r3)
+	cmpdi	0,r5,0
+	beq	1f
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VSX@h
+	andc	r4,r4,r3		/* disable VSX for previous task */
+	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	ld	r4,last_task_used_vsx@got(r2)
+	std	r5,0(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#endif /* CONFIG_VSX */
+
 
 /*
  * The routines below are in assembler so we can closely control the
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index b746f4ca420..c4bcf072cb3 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -11,10 +11,11 @@ obj-y				:= fault.o mem.o pgtable.o gup.o \
 				   pgtable_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 				   tlb_nohash_low.o
-hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
-obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
+obj-$(CONFIG_PPC64)		+= mmap_64.o
+hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
+obj-$(CONFIG_PPC_STD_MMU_64)	+= hash_utils_64.o \
 				   slb_low.o slb.o stab.o \
-				   mmap_64.o $(hash-y)
+				   mmap_64.o $(hash64-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_hash$(CONFIG_WORD_SIZE).o \
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 34e5c0b219b..056d23a1b10 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -27,6 +27,7 @@
 #include <asm/cputable.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
+#include <asm/ppc-opcode.h>
 
 #ifdef DEBUG_LOW
 #define DBG_LOW(fmt...) udbg_printf(fmt)
@@ -49,14 +50,21 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
 	case MMU_PAGE_4K:
 		va &= ~0xffful;
 		va |= ssize << 8;
-		asm volatile("tlbie %0,0" : : "r" (va) : "memory");
+		asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0),
+					       %2)
+			     : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+			     : "memory");
 		break;
 	default:
 		penc = mmu_psize_defs[psize].penc;
 		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 		va |= penc << 12;
 		va |= ssize << 8;
-		asm volatile("tlbie %0,1" : : "r" (va) : "memory");
+		va |= 1; /* L */
+		asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0),
+					       %2)
+			     : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+			     : "memory");
 		break;
 	}
 }
@@ -80,6 +88,7 @@ static inline void __tlbiel(unsigned long va, int psize, int ssize)
 		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 		va |= penc << 12;
 		va |= ssize << 8;
+		va |= 1; /* L */
 		asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)"
 			     : : "r"(va) : "memory");
 		break;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 3e6a6543f53..68a821add28 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -66,6 +66,7 @@
 
 #include "mmu_decl.h"
 
+#ifdef CONFIG_PPC_STD_MMU_64
 #if PGTABLE_RANGE > USER_VSID_RANGE
 #warning Limited user VSID range means pagetable space is wasted
 #endif
@@ -73,6 +74,7 @@
 #if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
 #warning TASK_SIZE is smaller than it needs to be.
 #endif
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 phys_addr_t memstart_addr = ~0;
 phys_addr_t kernstart_addr;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 030d0005b4d..8343986809c 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -46,7 +46,7 @@ static unsigned int next_context, nr_free_contexts;
 static unsigned long *context_map;
 static unsigned long *stale_map[NR_CPUS];
 static struct mm_struct **context_mm;
-static spinlock_t context_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(context_lock);
 
 #define CTX_MAP_SIZE	\
 	(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -73,7 +73,6 @@ static unsigned int steal_context_smp(unsigned int id)
 	struct mm_struct *mm;
 	unsigned int cpu, max;
 
- again:
 	max = last_context - first_context;
 
 	/* Attempt to free next_context first and then loop until we manage */
@@ -108,7 +107,9 @@ static unsigned int steal_context_smp(unsigned int id)
 	spin_unlock(&context_lock);
 	cpu_relax();
 	spin_lock(&context_lock);
-	goto again;
+
+	/* This will cause the caller to try again */
+	return MMU_NO_CONTEXT;
 }
 #endif  /* CONFIG_SMP */
 
@@ -194,6 +195,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 		WARN_ON(prev->context.active < 1);
 		prev->context.active--;
 	}
+
+ again:
 #endif /* CONFIG_SMP */
 
 	/* If we already have a valid assigned context, skip all that */
@@ -212,7 +215,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 #ifdef CONFIG_SMP
 		if (num_online_cpus() > 1) {
 			id = steal_context_smp(id);
-			goto stolen;
+			if (id == MMU_NO_CONTEXT)
+				goto again;
 		}
 #endif /* CONFIG_SMP */
 		id = steal_context_up(id);
@@ -272,6 +276,7 @@ int init_new_context(struct task_struct *t, struct mm_struct *mm)
  */
 void destroy_context(struct mm_struct *mm)
 {
+	unsigned long flags;
 	unsigned int id;
 
 	if (mm->context.id == MMU_NO_CONTEXT)
@@ -279,18 +284,18 @@ void destroy_context(struct mm_struct *mm)
 
 	WARN_ON(mm->context.active != 0);
 
-	spin_lock(&context_lock);
+	spin_lock_irqsave(&context_lock, flags);
 	id = mm->context.id;
 	if (id != MMU_NO_CONTEXT) {
 		__clear_bit(id, context_map);
 		mm->context.id = MMU_NO_CONTEXT;
 #ifdef DEBUG_MAP_CONSISTENCY
 		mm->context.active = 0;
-		context_mm[id] = NULL;
 #endif
+		context_mm[id] = NULL;
 		nr_free_contexts++;
 	}
-	spin_unlock(&context_lock);
+	spin_unlock_irqrestore(&context_lock, flags);
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 9047145095a..b037d95eead 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -981,6 +981,8 @@ void __init do_init_bootmem(void)
 		mark_reserved_regions_for_nid(nid);
 		sparse_memory_present_with_active_regions(nid);
 	}
+
+	init_bootmem_done = 1;
 }
 
 void __init paging_init(void)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 89497fb0428..3b52c80e5e3 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -2,7 +2,7 @@
  * PowerPC64 SLB support.
  *
  * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
- * Based on earlier code writteh by:
+ * Based on earlier code written by:
  * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
  *    Copyright (c) 2001 Dave Engebretsen
  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index 91596f6ba1f..62312abffa2 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -228,20 +228,6 @@ static void pmc_stop_ctrs(void)
 	mtpmr(PMRN_PMGC0, pmgc0);
 }
 
-static void dump_pmcs(void)
-{
-	printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
-	printk("pmc\t\tpmlca\t\tpmlcb\n");
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
-			mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
-			mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
-			mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
-			mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
-}
-
 static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
 {
 	int i;
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index f39c953d535..a6e43cb6f82 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -45,6 +45,7 @@ config KILAUEA
 	depends on 40x
 	default n
 	select 405EX
+	select PPC40x_SIMPLE
 	select PPC4xx_PCI_EXPRESS
 	help
 	  This option enables support for the AMCC PPC405EX evaluation board.
@@ -56,6 +57,7 @@ config MAKALU
 	select 405EX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select PPC40x_SIMPLE
 	help
 	  This option enables support for the AMCC PPC405EX board.
 
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 9bab76a652a..56e89004c46 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,6 +1,4 @@
-obj-$(CONFIG_KILAUEA)				+= kilauea.o
 obj-$(CONFIG_HCU4)				+= hcu4.o
-obj-$(CONFIG_MAKALU)				+= makalu.o
 obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
deleted file mode 100644
index fd7d934dac8..00000000000
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Kilauea board specific routines
- *
- * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Walnut code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id kilauea_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init kilauea_device_probe(void)
-{
-	of_platform_bus_probe(NULL, kilauea_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(kilauea, kilauea_device_probe);
-
-static int __init kilauea_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
-		return 0;
-
-	ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
-
-	return 1;
-}
-
-define_machine(kilauea) {
-	.name 				= "Kilauea",
-	.probe 				= kilauea_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
deleted file mode 100644
index a6a1d6017b7..00000000000
--- a/arch/powerpc/platforms/40x/makalu.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Makalu board specific routines
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Walnut code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id makalu_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init makalu_device_probe(void)
-{
-	of_platform_bus_probe(NULL, makalu_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(makalu, makalu_device_probe);
-
-static int __init makalu_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,makalu"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(makalu) {
-	.name 				= "Makalu",
-	.probe 				= makalu_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index f40ac9b8f99..5fd5a597400 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -51,7 +51,10 @@ machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
  * board.c file for it rather than adding it to this list.
  */
 static char *board[] __initdata = {
-	"amcc,acadia"
+	"amcc,acadia",
+	"amcc,haleakala",
+	"amcc,kilauea",
+	"amcc,makalu"
 };
 
 static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index fc7fb001276..d0fc6866b00 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
 #include <asm/ppc4xx.h>
 
 static struct of_device_id xilinx_of_bus_ids[] __initdata = {
@@ -47,6 +48,7 @@ static int __init virtex_probe(void)
 define_machine(virtex) {
 	.name			= "Xilinx Virtex",
 	.probe			= virtex_probe,
+	.setup_arch		= xilinx_pci_init,
 	.init_IRQ		= xilinx_intc_init_tree,
 	.get_irq		= xilinx_intc_get_irq,
 	.restart		= ppc4xx_reset_system,
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 0d83a6a0397..90e3192611a 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -156,7 +156,7 @@ config YOSEMITE
 #	  This option enables support for the IBM PPC440GX evaluation board.
 
 config XILINX_VIRTEX440_GENERIC_BOARD
-	bool "Generic Xilinx Virtex 440 board"
+	bool "Generic Xilinx Virtex 5 FXT board support"
 	depends on 44x
 	default n
 	select XILINX_VIRTEX_5_FXT
@@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD
 	  Most Virtex 5 designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config XILINX_ML510
+	bool "Xilinx ML510 extra support"
+	depends on XILINX_VIRTEX440_GENERIC_BOARD
+	select PPC_PCI_CHOICE
+	select XILINX_PCI if PCI
+	select PPC_INDIRECT_PCI if PCI
+	select PPC_I8259 if PCI
+	help
+	  This option enables extra support for features on the Xilinx ML510
+	  board.  The ML510 has a PCI bus with ALI south bridge.
+
 config PPC44x_SIMPLE
 	bool "Simple PowerPC 44x board support"
 	depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 01f51daace1..ee6185aeaa3 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
index 68637faf70a..cf96ccaa760 100644
--- a/arch/powerpc/platforms/44x/virtex.c
+++ b/arch/powerpc/platforms/44x/virtex.c
@@ -16,6 +16,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
 #include <asm/reg.h>
 #include <asm/ppc4xx.h>
 #include "44x.h"
@@ -53,6 +54,7 @@ static int __init virtex_probe(void)
 define_machine(virtex) {
 	.name			= "Xilinx Virtex440",
 	.probe			= virtex_probe,
+	.setup_arch		= xilinx_pci_init,
 	.init_IRQ		= xilinx_intc_init_tree,
 	.get_irq		= xilinx_intc_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c
new file mode 100644
index 00000000000..ba4a6e388a4
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex_ml510.c
@@ -0,0 +1,29 @@
+#include <asm/i8259.h>
+#include <linux/pci.h>
+#include "44x.h"
+
+/**
+ * ml510_ail_quirk
+ */
+static void __devinit ml510_ali_quirk(struct pci_dev *dev)
+{
+	/* Enable the IDE controller */
+	pci_write_config_byte(dev, 0x58, 0x4c);
+	/* Assign irq 14 to the primary ide channel */
+	pci_write_config_byte(dev, 0x44, 0x0d);
+	/* Assign irq 15 to the secondary ide channel */
+	pci_write_config_byte(dev, 0x75, 0x0f);
+	/* Set the ide controller in native mode */
+	pci_write_config_byte(dev, 0x09, 0xff);
+
+	/* INTB = disabled, INTA = disabled */
+	pci_write_config_byte(dev, 0x48, 0x00);
+	/* INTD = disabled, INTC = disabled */
+	pci_write_config_byte(dev, 0x4a, 0x00);
+	/* Audio = INT7, Modem = disabled. */
+	pci_write_config_byte(dev, 0x4b, 0x60);
+	/* USB = INT7 */
+	pci_write_config_byte(dev, 0x74, 0x06);
+}
+DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk);
+
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 960edf89be5..c5118802a28 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -1,7 +1,7 @@
 /*
  * PIKA Warp(tm) board specific routines
  *
- * Copyright (c) 2008 PIKA Technologies
+ * Copyright (c) 2008-2009 PIKA Technologies
  *   Sean MacLennan <smaclennan@pikatech.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/of_gpio.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -23,6 +24,7 @@
 #include <asm/uic.h>
 #include <asm/ppc4xx.h>
 
+
 static __initdata struct of_device_id warp_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
 	{ .compatible = "ibm,opb", },
@@ -55,6 +57,8 @@ define_machine(warp) {
 };
 
 
+static u32 post_info;
+
 /* I am not sure this is the best place for this... */
 static int __init warp_post_info(void)
 {
@@ -77,21 +81,21 @@ static int __init warp_post_info(void)
 
 	iounmap(fpga);
 
-	if (post1 || post2)
+	if (post1 || post2) {
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-	else
+		post_info = 1;
+	} else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
 }
-machine_late_initcall(warp, warp_post_info);
 
 
 #ifdef CONFIG_SENSORS_AD7414
 
 static LIST_HEAD(dtm_shutdown_list);
 static void __iomem *dtm_fpga;
-static void __iomem *gpio_base;
+static unsigned green_led, red_led;
 
 
 struct dtm_shutdown {
@@ -134,14 +138,17 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
 static irqreturn_t temp_isr(int irq, void *context)
 {
 	struct dtm_shutdown *shutdown;
+	int value = 1;
 
 	local_irq_disable();
 
+	gpio_set_value(green_led, 0);
+
 	/* Run through the shutdown list. */
 	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
 		shutdown->func(shutdown->arg);
 
-	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n");
 
 	while (1) {
 		if (dtm_fpga) {
@@ -149,52 +156,34 @@ static irqreturn_t temp_isr(int irq, void *context)
 			out_be32(dtm_fpga + 0x14, reset);
 		}
 
-		if (gpio_base) {
-			unsigned leds = in_be32(gpio_base);
-
-			/* green off, red toggle */
-			leds &= ~0x80000000;
-			leds ^=  0x40000000;
-
-			out_be32(gpio_base, leds);
-		}
-
+		gpio_set_value(red_led, value);
+		value ^= 1;
 		mdelay(500);
 	}
 }
 
 static int pika_setup_leds(void)
 {
-	struct device_node *np;
-	const u32 *gpios;
-	int len;
+	struct device_node *np, *child;
 
-	np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+	np = of_find_compatible_node(NULL, NULL, "gpio-leds");
 	if (!np) {
-		printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
-		return -ENOENT;
-	}
-
-	gpios = of_get_property(np, "gpios", &len);
-	of_node_put(np);
-	if (!gpios || len < 4) {
-		printk(KERN_ERR __FILE__
-		       ": Unable to get gpios property (%d)\n", len);
+		printk(KERN_ERR __FILE__ ": Unable to find leds\n");
 		return -ENOENT;
 	}
 
-	np = of_find_node_by_phandle(gpios[0]);
-	if (!np) {
-		printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
-		return -ENOENT;
-	}
+	for_each_child_of_node(np, child)
+		if (strcmp(child->name, "green") == 0) {
+			green_led = of_get_gpio(child, 0);
+			/* Turn back on the green LED */
+			gpio_set_value(green_led, 1);
+		} else if (strcmp(child->name, "red") == 0) {
+			red_led = of_get_gpio(child, 0);
+			/* Set based on post */
+			gpio_set_value(red_led, post_info);
+		}
 
-	gpio_base = of_iomap(np, 0);
 	of_node_put(np);
-	if (!gpio_base) {
-		printk(KERN_ERR __FILE__ ": Unable to map gpio");
-		return -ENOMEM;
-	}
 
 	return 0;
 }
@@ -270,10 +259,10 @@ static int pika_dtm_thread(void __iomem *fpga)
 	}
 
 found_it:
-	i2c_put_adapter(adap);
-
 	pika_setup_critical_temp(client);
 
+	i2c_put_adapter(adap);
+
 	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
@@ -311,6 +300,9 @@ static int __init pika_dtm_start(void)
 	if (dtm_fpga == NULL)
 		return -ENOENT;
 
+	/* Must get post info before thread starts. */
+	warp_post_info();
+
 	dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
 	if (IS_ERR(dtm_thread)) {
 		iounmap(dtm_fpga);
@@ -333,6 +325,8 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
 	return 0;
 }
 
+machine_late_initcall(warp, warp_post_info);
+
 #endif
 
 EXPORT_SYMBOL(pika_dtm_register_shutdown);
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
index a2068faef6e..bcc69e1f77c 100644
--- a/arch/powerpc/platforms/52xx/efika.c
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -34,7 +34,7 @@
 static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			    int len, u32 * val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 	    | (((bus->number - hose->first_busno) & 0xff) << 16)
 	    | (hose->global_number << 24);
@@ -49,7 +49,7 @@ static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
 			     int offset, int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 	    | (((bus->number - hose->first_busno) & 0xff) << 16)
 	    | (hose->global_number << 24);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 87ff522f28b..dd43114e968 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -107,7 +107,7 @@ static int
 mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 *val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 value;
 
 	if (ppc_md.pci_exclude_device)
@@ -164,7 +164,7 @@ static int
 mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 value, mask;
 
 	if (ppc_md.pci_exclude_device)
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index 0eb6d7f6224..51fcae41f08 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 #include <linux/mdio-bitbang.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
@@ -115,7 +116,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	struct mii_bus *bus;
 	struct resource res;
 	struct device_node *node;
-	int ret, i;
+	int ret;
 
 	node = of_get_parent(ofdev->node);
 	of_node_put(node);
@@ -130,17 +131,13 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	if (!bus)
 		return -ENOMEM;
 
-	bus->phy_mask = 0;
 	bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		bus->irq[i] = -1;
-
 	bus->name = "ep8248e-mdio-bitbang";
 	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
-	return mdiobus_register(bus);
+	return of_mdiobus_register(bus, ofdev->node);
 }
 
 static int ep8248e_mdio_remove(struct of_device *ofdev)
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index 984db42cc8e..6cf0f97486e 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -24,10 +24,6 @@
 
 #include <linux/seq_file.h>
 
-/* Backword-compatibility stuff for the drivers */
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-#define CPM_IRQ_OFFSET 0
-
 /* The ADS8260 has 16, 32-bit wide control/status registers, accessed
  * only on word boundaries.
  * Not all are used (yet), or are interesting to us (yet).
@@ -44,14 +40,5 @@
 #define BCSR3_FETHIEN2		((uint)0x10000000)      /* 0 == enable*/
 #define BCSR3_FETH2_RST		((uint)0x80000000)      /* 0 == reset */
 
-/* cpm serial driver works with constants below */
-
-#define SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
-
 #endif /* __MACH_ADS8260_DEFS */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7f066adc068..43d385cedcd 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -34,6 +34,7 @@ config MPC85xx_MDS
 	bool "Freescale MPC85xx MDS"
 	select DEFAULT_UIMAGE
 	select PHYLIB
+	select HAS_RAPIDIO
 	help
 	  This option enables support for the MPC85xx MDS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index de66de7a9ca..53d5851a6c9 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -163,7 +163,8 @@ static void __init mpc85xx_ds_setup_arch(void)
 #ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
 			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
 			if ((rsrc.start & 0xfffff) == primary_phb_addr)
@@ -195,9 +196,9 @@ static int __init mpc8544_ds_probe(void)
 		primary_phb_addr = 0xb000;
 #endif
 		return 1;
-	} else {
-		return 0;
 	}
+
+	return 0;
 }
 
 static struct of_device_id __initdata mpc85xxds_ids[] = {
@@ -214,6 +215,7 @@ static int __init mpc85xxds_publish_devices(void)
 }
 machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
 machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -227,9 +229,26 @@ static int __init mpc8572_ds_probe(void)
 		primary_phb_addr = 0x8000;
 #endif
 		return 1;
-	} else {
-		return 0;
 	}
+
+	return 0;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0x9000;
+#endif
+		return 1;
+	}
+
+	return 0;
 }
 
 define_machine(mpc8544_ds) {
@@ -259,3 +278,17 @@ define_machine(mpc8572_ds) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p2020_ds) {
+	.name			= "P2020 DS",
+	.probe			= p2020_ds_probe,
+	.setup_arch		= mpc85xx_ds_setup_arch,
+	.init_IRQ		= mpc85xx_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 7dd029034ae..b2c0a431997 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -206,23 +206,24 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 
 	if (bcsr_regs) {
+		if (machine_is(mpc8568_mds)) {
 #define BCSR_UCC1_GETH_EN	(0x1 << 7)
 #define BCSR_UCC2_GETH_EN	(0x1 << 7)
 #define BCSR_UCC1_MODE_MSK	(0x3 << 4)
 #define BCSR_UCC2_MODE_MSK	(0x3 << 0)
 
-		/* Turn off UCC1 & UCC2 */
-		clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-		clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+			/* Turn off UCC1 & UCC2 */
+			clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+			clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
 
-		/* Mode is RGMII, all bits clear */
-		clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
-					 BCSR_UCC2_MODE_MSK);
-
-		/* Turn UCC1 & UCC2 on */
-		setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-		setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+			/* Mode is RGMII, all bits clear */
+			clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
+						 BCSR_UCC2_MODE_MSK);
 
+			/* Turn UCC1 & UCC2 on */
+			setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+			setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+		}
 		iounmap(bcsr_regs);
 	}
 #endif	/* CONFIG_QUICC_ENGINE */
@@ -257,7 +258,8 @@ static int __init board_fixups(void)
 
 	return 0;
 }
-machine_arch_initcall(mpc85xx_mds, board_fixups);
+machine_arch_initcall(mpc8568_mds, board_fixups);
+machine_arch_initcall(mpc8569_mds, board_fixups);
 
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
@@ -276,7 +278,8 @@ static int __init mpc85xx_publish_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -321,8 +324,8 @@ static int __init mpc85xx_mds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxMDS");
 }
 
-define_machine(mpc85xx_mds) {
-	.name		= "MPC85xx MDS",
+define_machine(mpc8568_mds) {
+	.name		= "MPC8568 MDS",
 	.probe		= mpc85xx_mds_probe,
 	.setup_arch	= mpc85xx_mds_setup_arch,
 	.init_IRQ	= mpc85xx_mds_pic_init,
@@ -334,3 +337,24 @@ define_machine(mpc85xx_mds) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init mpc8569_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
+}
+
+define_machine(mpc8569_mds) {
+	.name		= "MPC8569 MDS",
+	.probe		= mpc8569_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index d79104669cd..2efa052975e 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index af14f852d74..90754e752bd 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index ea236063965..72b31a6010a 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 3f49a6f893a..51eec0cd551 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index c4ec49b5f7f..7e9e83c04a8 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -24,7 +24,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 014e26cda08..d84bbb508ee 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -20,7 +20,6 @@
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
 #include <asm/mpic.h>
-#include <asm/mpc86xx.h>
 #include <asm/cacheflush.h>
 
 #include <sysdev/fsl_soc.h>
@@ -30,6 +29,11 @@
 extern void __secondary_start_mpc86xx(void);
 extern unsigned long __secondary_hold_acknowledge;
 
+#define MCM_PORT_CONFIG_OFFSET	0x10
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET      (0x1000)
+#define MPC86xx_MCM_SIZE        (0x1000)
 
 static void __init
 smp_86xx_release_core(int nr)
@@ -48,6 +52,8 @@ smp_86xx_release_core(int nr)
 	pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2));
 	pcr |= 1 << (nr + 24);
 	out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr);
+
+	iounmap(mcm_vaddr);
 }
 
 
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 2886a36fc08..51c8f331b67 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -25,7 +25,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index a5076668bad..19412f76fa3 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -17,10 +17,6 @@
 
 #include <sysdev/fsl_soc.h>
 
-#define MPC8xx_CPM_OFFSET	(0x9c0)
-#define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
-#define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
-
 /* Bits of interest in the BCSRs.
  */
 #define BCSR1_ETHEN		((uint)0x20000000)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index e3e87078d03..04a8061045c 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -329,4 +329,8 @@ config MCU_MPC8349EMITX
 	  also register MCU GPIOs with the generic GPIO API, so you'll able
 	  to use MCU pins as GPIOs.
 
+config XILINX_PCI
+	bool "Xilinx PCI host bridge support"
+	depends on PCI && XILINX_VIRTEX
+
 endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 732ee93a8e9..cca6b4fc719 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -10,7 +10,6 @@ menu "Processor support"
 choice
 	prompt "Processor Type"
 	depends on PPC32
-	default 6xx
 	help
 	  There are five families of 32 bit PowerPC chips supported.
 	  The most common ones are the desktop and server CPUs (601, 603,
@@ -22,7 +21,7 @@ choice
 
 	  If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx.
 
-config 6xx
+config PPC_BOOK3S
 	bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
 	select PPC_FPU
 
@@ -58,13 +57,11 @@ config E200
 
 endchoice
 
-# Until we have a choice of exclusive CPU types on 64-bit, we always
-# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is
-# "classic" MMU
-
 config PPC_BOOK3S
-       def_bool y
-       depends on PPC64 || 6xx
+	default y
+	depends on PPC64
+	select PPC_FPU
+
 
 config POWER4_ONLY
 	bool "Optimize for POWER4"
@@ -75,6 +72,10 @@ config POWER4_ONLY
 	  The resulting binary will not work on POWER3 or RS64 processors
 	  when compiled with binutils 2.15 or later.
 
+config 6xx
+	def_bool y
+	depends on PPC32 && PPC_BOOK3S
+
 config POWER3
 	bool
 	depends on PPC64 && PPC_BOOK3S
@@ -203,9 +204,8 @@ config SPE
 	  If in doubt, say Y here.
 
 config PPC_STD_MMU
-	bool
-	depends on 6xx || PPC64
-	default y
+	def_bool y
+	depends on PPC_BOOK3S
 
 config PPC_STD_MMU_32
 	def_bool y
@@ -263,8 +263,8 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-1024)"
-	range 2 1024
+	int "Maximum number of CPUs (2-8192)"
+	range 2 8192
 	depends on SMP
 	default "32" if PPC64
 	default "4"
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 0ce45c2b42f..c71498dbf21 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -329,7 +329,7 @@ static struct irq_host_ops msic_host_ops = {
 
 static int axon_msi_shutdown(struct of_device *device)
 {
-	struct axon_msic *msic = device->dev.platform_data;
+	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
 
 	pr_debug("axon_msi: disabling %s\n",
@@ -416,7 +416,7 @@ static int axon_msi_probe(struct of_device *device,
 	msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
 				& MSIC_FIFO_SIZE_MASK;
 
-	device->dev.platform_data = msic;
+	dev_set_drvdata(&device->dev, msic);
 
 	ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
 	ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index f39a3b2a166..00eaaa71630 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -162,8 +162,7 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus,
 		unsigned int devfn, int where, int size, u32 *val)
 {
 	char *config;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned int devno = devfn >> 3;
 	unsigned int fn = devfn & 0x7;
 
@@ -171,8 +170,6 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus,
 	BUG_ON(where % size);
 
 	pr_debug("    fake read: bus=0x%x, ", bus->number);
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
 	config = get_fake_config_start(hose, devno, fn);
 
 	pr_debug("devno=0x%x, where=0x%x, size=0x%x, ", devno, where, size);
@@ -192,8 +189,7 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus,
 		unsigned int devfn, int where, int size, u32 val)
 {
 	char *config;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct celleb_pci_resource *res;
 	unsigned int devno = devfn >> 3;
 	unsigned int fn = devfn & 0x7;
@@ -201,8 +197,6 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus,
 	/* allignment check */
 	BUG_ON(where % size);
 
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
 	config = get_fake_config_start(hose, devno, fn);
 
 	if (!config)
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
index 48ec88a38a1..05b0db3ef63 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_epci.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c
@@ -134,15 +134,11 @@ static int celleb_epci_read_config(struct pci_bus *bus,
 {
 	PCI_IO_ADDR epci_base;
 	PCI_IO_ADDR addr;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	/* allignment check */
 	BUG_ON(where % size);
 
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
-
 	if (!celleb_epci_get_epci_cfg(hose))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -198,16 +194,11 @@ static int celleb_epci_write_config(struct pci_bus *bus,
 {
 	PCI_IO_ADDR epci_base;
 	PCI_IO_ADDR addr;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	/* allignment check */
 	BUG_ON(where % size);
 
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
-
-
 	if (!celleb_epci_get_epci_cfg(hose))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 3e7e0f1568e..7fca09f990b 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -366,11 +366,7 @@ static void config_write_pciex_rc(unsigned int __iomem *base, uint32_t where,
 static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, unsigned int *val)
 {
-	struct device_node *dn;
-	struct pci_controller *phb;
-
-	dn = bus->sysdata;
-	phb = pci_find_hose_for_OF_device(dn);
+	struct pci_controller *phb = pci_bus_to_host(bus);
 
 	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) {
 		*val = ~0;
@@ -389,11 +385,7 @@ static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
 				  int where, int size, unsigned int val)
 {
-	struct device_node *dn;
-	struct pci_controller *phb;
-
-	dn = bus->sysdata;
-	phb = pci_find_hose_for_OF_device(dn);
+	struct pci_controller *phb = pci_bus_to_host(bus);
 
 	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index bed4690de39..5b34fc211f3 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -100,16 +100,6 @@
 #define IOSTE_PS_1M		0x0000000000000005ul /*   - 1MB  */
 #define IOSTE_PS_16M		0x0000000000000007ul /*   - 16MB */
 
-/* Page table entries */
-#define IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define IOPTE_M			0x2000000000000000ul /* coherency required */
-#define IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define IOPTE_SO_RW             0x1800000000000000ul /* ordering: r & w */
-#define IOPTE_RPN_Mask		0x07fffffffffff000ul /* RPN */
-#define IOPTE_H			0x0000000000000800ul /* cache hint */
-#define IOPTE_IOID_Mask		0x00000000000007fful /* ioid */
-
 
 /* IOMMU sizing */
 #define IO_SEGMENT_SHIFT	28
@@ -193,19 +183,21 @@ static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
 	 */
 	const unsigned long prot = 0xc48;
 	base_pte =
-		((prot << (52 + 4 * direction)) & (IOPTE_PP_W | IOPTE_PP_R))
-		| IOPTE_M | IOPTE_SO_RW | (window->ioid & IOPTE_IOID_Mask);
+		((prot << (52 + 4 * direction)) &
+		 (CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) |
+		CBE_IOPTE_M | CBE_IOPTE_SO_RW |
+		(window->ioid & CBE_IOPTE_IOID_Mask);
 #else
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
-		(window->ioid & IOPTE_IOID_Mask);
+	base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
+		CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask);
 #endif
 	if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
-		base_pte &= ~IOPTE_SO_RW;
+		base_pte &= ~CBE_IOPTE_SO_RW;
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
 	for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
-		io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
+		io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask);
 
 	mb();
 
@@ -231,8 +223,9 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
 #else
 	/* spider bridge does PCI reads after freeing - insert a mapping
 	 * to a scratch page instead of an invalid entry */
-	pte = IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | __pa(window->iommu->pad_page)
-		| (window->ioid & IOPTE_IOID_Mask);
+	pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW |
+		__pa(window->iommu->pad_page) |
+		(window->ioid & CBE_IOPTE_IOID_Mask);
 #endif
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
@@ -1001,7 +994,7 @@ static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
 	pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
 		  addr, ptab, segment, offset);
 
-	ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
+	ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask);
 }
 
 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
@@ -1016,14 +1009,14 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
-		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
+	base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
+		(cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask);
 
 	if (iommu_fixed_is_weak)
 		pr_info("IOMMU: Using weak ordering for fixed mapping\n");
 	else {
 		pr_info("IOMMU: Using strong ordering for fixed mapping\n");
-		base_pte |= IOPTE_SO_RW;
+		base_pte |= CBE_IOPTE_SO_RW;
 	}
 
 	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 706eb5c7e2e..24b30b6909c 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -631,10 +631,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 	if (IS_ERR(dentry))
 		goto out_dir;
 
-	ret = -EEXIST;
-	if (dentry->d_inode)
-		goto out_dput;
-
 	mode &= ~current_umask();
 
 	if (flags & SPU_CREATE_GANG)
@@ -648,8 +644,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 		fsnotify_mkdir(nd->path.dentry->d_inode, dentry);
 	return ret;
 
-out_dput:
-	dput(dentry);
 out_dir:
 	mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
 out:
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index f6b0c519d5a..8f67a394b2d 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -34,7 +34,7 @@ int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
 			   int len, u32 *val)
 {
 	volatile void __iomem *cfg_data;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (bus->number > 7)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -61,7 +61,7 @@ int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
 			    int len, u32 val)
 {
 	volatile void __iomem *cfg_data;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (bus->number > 7)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -96,7 +96,7 @@ static struct pci_ops gg2_pci_ops =
 int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 *val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 		| (((bus->number - hose->first_busno) & 0xff) << 16)
 		| (hose->global_number << 24);
@@ -111,7 +111,7 @@ int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		      int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 		| (((bus->number - hose->first_busno) & 0xff) << 16)
 		| (hose->global_number << 24);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 65a35f38e06..fd23a1d4b39 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,13 +51,20 @@ u8 uli_pirq_to_irq[8] = {
 	ULI_8259_NONE,		/* PIRQH */
 };
 
+static inline bool is_quirk_valid(void)
+{
+	return (machine_is(mpc86xx_hpcn) ||
+		machine_is(mpc8544_ds) ||
+		machine_is(p2020_ds) ||
+		machine_is(mpc8572_ds));
+}
+
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
 	unsigned char temp;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -80,8 +87,7 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	int i;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	/*
@@ -149,8 +155,7 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
 	 * IRQ 14: Edge
 	 * IRQ 15: Edge
 	 */
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	outb(0xfa, 0x4d0);
@@ -176,8 +181,7 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
 	unsigned char c;
 	unsigned int d;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	/* read/write lock */
@@ -201,8 +205,7 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -270,7 +273,6 @@ static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
 static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
 {
 	unsigned char c;
-	unsigned short temp;
 
 	if (!machine_is(mpc86xx_hpcd))
 		return;
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index 4543c4bc3a5..c5a87a72057 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -204,7 +204,8 @@ static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
 	dt_prop(dt, name, &data, sizeof(u32));
 }
 
-static void __init dt_prop_u64(struct iseries_flat_dt *dt, const char *name,
+static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
+					      const char *name,
 		u64 data)
 {
 	dt_prop(dt, name, &data, sizeof(u64));
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 40219823d9b..6c1e1011959 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -177,7 +177,7 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
 static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 {
 	struct iommu_table *tbl;
-	struct device_node *dn = pdev->sysdata;
+	struct device_node *dn = pci_device_to_OF_node(pdev);
 	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 3689c2413d2..fef4d515051 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -267,7 +267,8 @@ static struct pending_event *new_pending_event(void)
 	return ev;
 }
 
-static int signal_vsp_instruction(struct vsp_cmd_data *vsp_cmd)
+static int __maybe_unused
+signal_vsp_instruction(struct vsp_cmd_data *vsp_cmd)
 {
 	struct pending_event *ev = new_pending_event();
 	int rc;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 21cddc30220..175aac8ca7e 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -318,6 +318,7 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 {
 	struct resource *bar_res = &dev->resource[bar_num];
 	long bar_size = pci_resource_len(dev, bar_num);
+	struct device_node *dn = pci_device_to_OF_node(dev);
 
 	/*
 	 * No space to allocate, quick exit, skip Allocation.
@@ -335,9 +336,9 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 	 * Allocate the number of table entries needed for BAR.
 	 */
 	while (bar_size > 0 ) {
-		iomm_table[current_iomm_table_entry] = dev->sysdata;
+		iomm_table[current_iomm_table_entry] = dn;
 		ds_addr_table[current_iomm_table_entry] =
-			iseries_ds_addr(dev->sysdata) | (bar_num << 24);
+			iseries_ds_addr(dn) | (bar_num << 24);
 		bar_size -= IOMM_TABLE_ENTRY_SIZE;
 		++current_iomm_table_entry;
 	}
@@ -410,7 +411,7 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	struct device_node *node;
 	int i;
 
-	node = find_device_node(bus, pdev->devfn);
+	node = pci_device_to_OF_node(pdev);
 	pr_debug("PCI: iSeries %s, pdev %p, node %p\n",
 		 pci_name(pdev), pdev, node);
 	if (!node) {
@@ -441,7 +442,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 		}
 	}
 
-	pdev->sysdata = node;
 	allocate_device_bars(pdev);
 	iseries_device_information(pdev, bus, *sub_bus);
 }
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index 75cc165d5be..3bf546797cb 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -29,7 +29,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/phy.h>
-#include <linux/platform_device.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #define DELAY 1
@@ -39,6 +39,7 @@ static void __iomem *gpio_regs;
 struct gpio_priv {
 	int mdc_pin;
 	int mdio_pin;
+	int mdio_irqs[PHY_MAX_ADDR];
 };
 
 #define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
@@ -218,12 +219,11 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *phy_dn, *np = ofdev->node;
+	struct device_node *np = ofdev->node;
 	struct mii_bus *new_bus;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
 	int err;
-	int i;
 
 	err = -ENOMEM;
 	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
@@ -244,27 +244,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
 	new_bus->priv = priv;
 
-	new_bus->phy_mask = 0;
-
-	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-
-	if (!new_bus->irq)
-		goto out_free_bus;
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = NO_IRQ;
-
-	for (phy_dn = of_get_next_child(np, NULL);
-	     phy_dn != NULL;
-	     phy_dn = of_get_next_child(np, phy_dn)) {
-		const unsigned int *ip, *regp;
-
-		ip = of_get_property(phy_dn, "interrupts", NULL);
-		regp = of_get_property(phy_dn, "reg", NULL);
-		if (!ip || !regp || *regp >= PHY_MAX_ADDR)
-			continue;
-		new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
-	}
+	new_bus->irq = priv->mdio_irqs;
 
 	prop = of_get_property(np, "mdc-pin", NULL);
 	priv->mdc_pin = *prop;
@@ -275,7 +255,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	new_bus->parent = dev;
 	dev_set_drvdata(dev, new_bus);
 
-	err = mdiobus_register(new_bus);
+	err = of_mdiobus_register(new_bus, np);
 
 	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
@@ -286,8 +266,6 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	return 0;
 
 out_free_irq:
-	kfree(new_bus->irq);
-out_free_bus:
 	kfree(new_bus);
 out_free_priv:
 	kfree(priv);
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 7039d8f1d3b..dce73634910 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -221,7 +221,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 			continue;
 		irq += __ilog2(bits);
 		spin_unlock_irqrestore(&pmac_pic_lock, flags);
-		__do_IRQ(irq);
+		generic_handle_irq(irq);
 		spin_lock_irqsave(&pmac_pic_lock, flags);
 		rc = IRQ_HANDLED;
 	}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 45936c9ed0e..86f69a4eb49 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -655,7 +655,7 @@ static int __init pmac_probe(void)
 /* Move that to pci.c */
 static int pmac_pci_probe_mode(struct pci_bus *bus)
 {
-	struct device_node *node = bus->sysdata;
+	struct device_node *node = pci_bus_to_OF_node(bus);
 
 	/* We need to use normal PCI probing for the AGP bus,
 	 * since the device for the AGP bridge isn't in the tree.
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 9a2b6d94861..846eb8b57fd 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -24,6 +24,7 @@
 #include <linux/lmb.h>
 
 #include <asm/firmware.h>
+#include <asm/iommu.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
@@ -605,9 +606,8 @@ static int dma_ioc0_map_pages(struct ps3_dma_region *r, unsigned long phys_addr,
 				       r->ioid,
 				       iopte_flag);
 		if (result) {
-			printk(KERN_WARNING "%s:%d: lv1_map_device_dma_region "
-				"failed: %s\n", __func__, __LINE__,
-				ps3_result(result));
+			pr_warning("%s:%d: lv1_put_iopte failed: %s\n",
+				   __func__, __LINE__, ps3_result(result));
 			goto fail_map;
 		}
 		DBG("%s: pg=%d bus=%#lx, lpar=%#lx, ioid=%#x\n", __func__,
@@ -1001,7 +1001,8 @@ static int dma_sb_region_create_linear(struct ps3_dma_region *r)
 		if (len > r->len)
 			len = r->len;
 		result = dma_sb_map_area(r, virt_addr, len, &tmp,
-			IOPTE_PP_W | IOPTE_PP_R | IOPTE_SO_RW | IOPTE_M);
+			CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_SO_RW |
+			CBE_IOPTE_M);
 		BUG_ON(result);
 	}
 
@@ -1014,7 +1015,8 @@ static int dma_sb_region_create_linear(struct ps3_dma_region *r)
 		else
 			len -= map.rm.size - r->offset;
 		result = dma_sb_map_area(r, virt_addr, len, &tmp,
-			IOPTE_PP_W | IOPTE_PP_R | IOPTE_SO_RW | IOPTE_M);
+			CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_SO_RW |
+			CBE_IOPTE_M);
 		BUG_ON(result);
 	}
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index cf1cd0f8c18..d6487a9c801 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -226,6 +226,44 @@ static struct property property_av_multi_out = {
 	.value = &saved_params.av_multi_out,
 };
 
+
+static DEFINE_MUTEX(os_area_flash_mutex);
+
+static const struct ps3_os_area_flash_ops *os_area_flash_ops;
+
+void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops)
+{
+	mutex_lock(&os_area_flash_mutex);
+	os_area_flash_ops = ops;
+	mutex_unlock(&os_area_flash_mutex);
+}
+EXPORT_SYMBOL_GPL(ps3_os_area_flash_register);
+
+static ssize_t os_area_flash_read(void *buf, size_t count, loff_t pos)
+{
+	ssize_t res = -ENODEV;
+
+	mutex_lock(&os_area_flash_mutex);
+	if (os_area_flash_ops)
+		res = os_area_flash_ops->read(buf, count, pos);
+	mutex_unlock(&os_area_flash_mutex);
+
+	return res;
+}
+
+static ssize_t os_area_flash_write(const void *buf, size_t count, loff_t pos)
+{
+	ssize_t res = -ENODEV;
+
+	mutex_lock(&os_area_flash_mutex);
+	if (os_area_flash_ops)
+		res = os_area_flash_ops->write(buf, count, pos);
+	mutex_unlock(&os_area_flash_mutex);
+
+	return res;
+}
+
+
 /**
  * os_area_set_property - Add or overwrite a saved_params value to the device tree.
  *
@@ -352,12 +390,12 @@ static int db_verify(const struct os_area_db *db)
 	if (memcmp(db->magic_num, OS_AREA_DB_MAGIC_NUM,
 		sizeof(db->magic_num))) {
 		pr_debug("%s:%d magic_num failed\n", __func__, __LINE__);
-		return -1;
+		return -EINVAL;
 	}
 
 	if (db->version != 1) {
 		pr_debug("%s:%d version failed\n", __func__, __LINE__);
-		return -1;
+		return -EINVAL;
 	}
 
 	return 0;
@@ -578,59 +616,48 @@ static void os_area_db_init(struct os_area_db *db)
  *
  */
 
-static void __maybe_unused update_flash_db(void)
+static int update_flash_db(void)
 {
-	int result;
-	int file;
-	off_t offset;
+	const unsigned int buf_len = 8 * OS_AREA_SEGMENT_SIZE;
+	struct os_area_header *header;
 	ssize_t count;
-	static const unsigned int buf_len = 8 * OS_AREA_SEGMENT_SIZE;
-	const struct os_area_header *header;
+	int error;
+	loff_t pos;
 	struct os_area_db* db;
 
 	/* Read in header and db from flash. */
 
-	file = sys_open("/dev/ps3flash", O_RDWR, 0);
-
-	if (file < 0) {
-		pr_debug("%s:%d sys_open failed\n", __func__, __LINE__);
-		goto fail_open;
-	}
-
 	header = kmalloc(buf_len, GFP_KERNEL);
-
 	if (!header) {
-		pr_debug("%s:%d kmalloc failed\n", __func__, __LINE__);
-		goto fail_malloc;
+		pr_debug("%s: kmalloc failed\n", __func__);
+		return -ENOMEM;
 	}
 
-	offset = sys_lseek(file, 0, SEEK_SET);
-
-	if (offset != 0) {
-		pr_debug("%s:%d sys_lseek failed\n", __func__, __LINE__);
-		goto fail_header_seek;
+	count = os_area_flash_read(header, buf_len, 0);
+	if (count < 0) {
+		pr_debug("%s: os_area_flash_read failed %zd\n", __func__,
+			 count);
+		error = count;
+		goto fail;
 	}
 
-	count = sys_read(file, (char __user *)header, buf_len);
-
-	result = count < OS_AREA_SEGMENT_SIZE || verify_header(header)
-		|| count < header->db_area_offset * OS_AREA_SEGMENT_SIZE;
-
-	if (result) {
-		pr_debug("%s:%d verify_header failed\n", __func__, __LINE__);
+	pos = header->db_area_offset * OS_AREA_SEGMENT_SIZE;
+	if (count < OS_AREA_SEGMENT_SIZE || verify_header(header) ||
+	    count < pos) {
+		pr_debug("%s: verify_header failed\n", __func__);
 		dump_header(header);
-		goto fail_header;
+		error = -EINVAL;
+		goto fail;
 	}
 
 	/* Now got a good db offset and some maybe good db data. */
 
-	db = (void*)header + header->db_area_offset * OS_AREA_SEGMENT_SIZE;
+	db = (void *)header + pos;
 
-	result = db_verify(db);
-
-	if (result) {
-		printk(KERN_NOTICE "%s:%d: Verify of flash database failed, "
-			"formatting.\n", __func__, __LINE__);
+	error = db_verify(db);
+	if (error) {
+		pr_notice("%s: Verify of flash database failed, formatting.\n",
+			  __func__);
 		dump_db(db);
 		os_area_db_init(db);
 	}
@@ -639,29 +666,16 @@ static void __maybe_unused update_flash_db(void)
 
 	db_set_64(db, &os_area_db_id_rtc_diff, saved_params.rtc_diff);
 
-	offset = sys_lseek(file, header->db_area_offset * OS_AREA_SEGMENT_SIZE,
-		SEEK_SET);
-
-	if (offset != header->db_area_offset * OS_AREA_SEGMENT_SIZE) {
-		pr_debug("%s:%d sys_lseek failed\n", __func__, __LINE__);
-		goto fail_db_seek;
-	}
-
-	count = sys_write(file, (const char __user *)db,
-		sizeof(struct os_area_db));
-
+	count = os_area_flash_write(db, sizeof(struct os_area_db), pos);
 	if (count < sizeof(struct os_area_db)) {
-		pr_debug("%s:%d sys_write failed\n", __func__, __LINE__);
+		pr_debug("%s: os_area_flash_write failed %zd\n", __func__,
+			 count);
+		error = count < 0 ? count : -EIO;
 	}
 
-fail_db_seek:
-fail_header:
-fail_header_seek:
+fail:
 	kfree(header);
-fail_malloc:
-	sys_close(file);
-fail_open:
-	return;
+	return error;
 }
 
 /**
@@ -674,11 +688,11 @@ fail_open:
 static void os_area_queue_work_handler(struct work_struct *work)
 {
 	struct device_node *node;
+	int error;
 
 	pr_debug(" -> %s:%d\n", __func__, __LINE__);
 
 	node = of_find_node_by_path("/");
-
 	if (node) {
 		os_area_set_property(node, &property_rtc_diff);
 		of_node_put(node);
@@ -686,12 +700,10 @@ static void os_area_queue_work_handler(struct work_struct *work)
 		pr_debug("%s:%d of_find_node_by_path failed\n",
 			__func__, __LINE__);
 
-#if defined(CONFIG_PS3_FLASH) || defined(CONFIG_PS3_FLASH_MODULE)
-	update_flash_db();
-#else
-	printk(KERN_WARNING "%s:%d: No flash rom driver configured.\n",
-		__func__, __LINE__);
-#endif
+	error = update_flash_db();
+	if (error)
+		pr_warning("%s: Could not update FLASH ROM\n", __func__);
+
 	pr_debug(" <- %s:%d\n", __func__, __LINE__);
 }
 
@@ -808,7 +820,7 @@ u64 ps3_os_area_get_rtc_diff(void)
 {
 	return saved_params.rtc_diff;
 }
-EXPORT_SYMBOL(ps3_os_area_get_rtc_diff);
+EXPORT_SYMBOL_GPL(ps3_os_area_get_rtc_diff);
 
 /**
  * ps3_os_area_set_rtc_diff - Set the rtc diff value.
@@ -824,7 +836,7 @@ void ps3_os_area_set_rtc_diff(u64 rtc_diff)
 		os_area_queue_work();
 	}
 }
-EXPORT_SYMBOL(ps3_os_area_set_rtc_diff);
+EXPORT_SYMBOL_GPL(ps3_os_area_set_rtc_diff);
 
 /**
  * ps3_os_area_get_av_multi_out - Returns the default video mode.
diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h
index 136aa0637d9..9a196a88eda 100644
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -232,14 +232,4 @@ int ps3_repository_read_spu_resource_id(unsigned int res_index,
 int ps3_repository_read_vuart_av_port(unsigned int *port);
 int ps3_repository_read_vuart_sysmgr_port(unsigned int *port);
 
-/* Page table entries */
-#define IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define IOPTE_M			0x2000000000000000ul /* coherency required */
-#define IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define IOPTE_SO_RW             0x1800000000000000ul /* ordering: r & w */
-#define IOPTE_RPN_Mask		0x07fffffffffff000ul /* RPN */
-#define IOPTE_H			0x0000000000000800ul /* cache hint */
-#define IOPTE_IOID_Mask		0x00000000000007fful /* ioid */
-
 #endif
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 1a7b5ae0c83..149bea2ce58 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -32,6 +32,7 @@
 #include <asm/udbg.h>
 #include <asm/prom.h>
 #include <asm/lv1call.h>
+#include <asm/ps3gpu.h>
 
 #include "platform.h"
 
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index a0927a3bacb..f6e04bcc70e 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -32,12 +32,6 @@
 #define DBG pr_debug
 #endif
 
-static irqreturn_t ipi_function_handler(int irq, void *msg)
-{
-	smp_message_recv((int)(long)msg);
-	return IRQ_HANDLED;
-}
-
 /**
   * ps3_ipi_virqs - a per cpu array of virqs for ipi use
   */
@@ -45,13 +39,6 @@ static irqreturn_t ipi_function_handler(int irq, void *msg)
 #define MSG_COUNT 4
 static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]);
 
-static const char *names[MSG_COUNT] = {
-	"ipi call",
-	"ipi reschedule",
-	"ipi migrate",
-	"ipi debug brk"
-};
-
 static void do_message_pass(int target, int msg)
 {
 	int result;
@@ -119,8 +106,7 @@ static void __init ps3_smp_setup_cpu(int cpu)
 		DBG("%s:%d: (%d, %d) => virq %u\n",
 			__func__, __LINE__, cpu, i, virqs[i]);
 
-		result = request_irq(virqs[i], ipi_function_handler,
-			IRQF_DISABLED, names[i], (void*)(long)i);
+		result = smp_request_message_ipi(virqs[i], i);
 
 		if (result)
 			virqs[i] = NO_IRQ;
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9a73d023863..9fead0faf38 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -27,6 +27,7 @@
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 #include <asm/firmware.h>
+#include <asm/iommu.h>
 
 #include "platform.h"
 
@@ -531,7 +532,8 @@ static void * ps3_alloc_coherent(struct device *_dev, size_t size,
 	}
 
 	result = ps3_dma_map(dev->d_region, virt_addr, size, dma_handle,
-			     IOPTE_PP_W | IOPTE_PP_R | IOPTE_SO_RW | IOPTE_M);
+			     CBE_IOPTE_PP_W | CBE_IOPTE_PP_R |
+			     CBE_IOPTE_SO_RW | CBE_IOPTE_M);
 
 	if (result) {
 		pr_debug("%s:%d: ps3_dma_map failed (%d)\n",
@@ -575,7 +577,8 @@ static dma_addr_t ps3_sb_map_page(struct device *_dev, struct page *page,
 
 	result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
 			     &bus_addr,
-			     IOPTE_PP_R | IOPTE_PP_W | IOPTE_SO_RW | IOPTE_M);
+			     CBE_IOPTE_PP_R | CBE_IOPTE_PP_W |
+			     CBE_IOPTE_SO_RW | CBE_IOPTE_M);
 
 	if (result) {
 		pr_debug("%s:%d: ps3_dma_map failed (%d)\n",
@@ -596,16 +599,16 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page,
 	u64 iopte_flag;
 	void *ptr = page_address(page) + offset;
 
-	iopte_flag = IOPTE_M;
+	iopte_flag = CBE_IOPTE_M;
 	switch (direction) {
 	case DMA_BIDIRECTIONAL:
-		iopte_flag |= IOPTE_PP_R | IOPTE_PP_W | IOPTE_SO_RW;
+		iopte_flag |= CBE_IOPTE_PP_R | CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
 		break;
 	case DMA_TO_DEVICE:
-		iopte_flag |= IOPTE_PP_R | IOPTE_SO_R;
+		iopte_flag |= CBE_IOPTE_PP_R | CBE_IOPTE_SO_R;
 		break;
 	case DMA_FROM_DEVICE:
-		iopte_flag |= IOPTE_PP_W | IOPTE_SO_RW;
+		iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
 		break;
 	default:
 		/* not happned */
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 3ee01b4f425..661c8e02bcb 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -388,7 +388,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
 
 		while (pci->phb->dma_window_size * children > 0x80000000ul)
 			pci->phb->dma_window_size >>= 1;
-		pr_debug("No ISA/IDE, window size is 0x%lx\n",
+		pr_debug("No ISA/IDE, window size is 0x%llx\n",
 			 pci->phb->dma_window_size);
 		pci->phb->dma_window_base_cur = 0;
 
@@ -414,7 +414,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
 	while (pci->phb->dma_window_size * children > 0x70000000ul)
 		pci->phb->dma_window_size >>= 1;
 
-	pr_debug("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
+	pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size);
 }
 
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 52a80e5840e..e3139fa5e55 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -609,3 +609,55 @@ void __init hpte_init_lpar(void)
 	ppc_md.flush_hash_range	= pSeries_lpar_flush_hash_range;
 	ppc_md.hpte_clear_all   = pSeries_lpar_hptab_clear;
 }
+
+#ifdef CONFIG_PPC_SMLPAR
+#define CMO_FREE_HINT_DEFAULT 1
+static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;
+
+static int __init cmo_free_hint(char *str)
+{
+	char *parm;
+	parm = strstrip(str);
+
+	if (strcasecmp(parm, "no") == 0 || strcasecmp(parm, "off") == 0) {
+		printk(KERN_INFO "cmo_free_hint: CMO free page hinting is not active.\n");
+		cmo_free_hint_flag = 0;
+		return 1;
+	}
+
+	cmo_free_hint_flag = 1;
+	printk(KERN_INFO "cmo_free_hint: CMO free page hinting is active.\n");
+
+	if (strcasecmp(parm, "yes") == 0 || strcasecmp(parm, "on") == 0)
+		return 1;
+
+	return 0;
+}
+
+__setup("cmo_free_hint=", cmo_free_hint);
+
+static void pSeries_set_page_state(struct page *page, int order,
+				   unsigned long state)
+{
+	int i, j;
+	unsigned long cmo_page_sz, addr;
+
+	cmo_page_sz = cmo_get_page_size();
+	addr = __pa((unsigned long)page_address(page));
+
+	for (i = 0; i < (1 << order); i++, addr += PAGE_SIZE) {
+		for (j = 0; j < PAGE_SIZE; j += cmo_page_sz)
+			plpar_hcall_norets(H_PAGE_INIT, state, addr + j, 0);
+	}
+}
+
+void arch_free_page(struct page *page, int order)
+{
+	if (!cmo_free_hint_flag || !firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	pSeries_set_page_state(page, order, H_PAGE_SET_UNUSED);
+}
+EXPORT_SYMBOL(arch_free_page);
+
+#endif
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index afad9f5ac0a..b3cbac85592 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -19,7 +19,7 @@
 #include <linux/vmalloc.h>
 #include <linux/spinlock.h>
 #include <linux/cpu.h>
-#include <linux/delay.h>
+#include <linux/workqueue.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -387,36 +387,51 @@ static void do_event_scan(void)
 	} while(error == 0);
 }
 
-static void do_event_scan_all_cpus(long delay)
+static void rtas_event_scan(struct work_struct *w);
+DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
+
+/*
+ * Delay should be at least one second since some machines have problems if
+ * we call event-scan too quickly.
+ */
+static unsigned long event_scan_delay = 1*HZ;
+static int first_pass = 1;
+
+static void rtas_event_scan(struct work_struct *w)
 {
-	int cpu;
+	unsigned int cpu;
+
+	do_event_scan();
 
 	get_online_cpus();
-	cpu = first_cpu(cpu_online_map);
-	for (;;) {
-		set_cpus_allowed(current, cpumask_of_cpu(cpu));
-		do_event_scan();
-		set_cpus_allowed(current, CPU_MASK_ALL);
-
-		/* Drop hotplug lock, and sleep for the specified delay */
-		put_online_cpus();
-		msleep_interruptible(delay);
-		get_online_cpus();
-
-		cpu = next_cpu(cpu, cpu_online_map);
-		if (cpu == NR_CPUS)
-			break;
+
+	cpu = next_cpu(smp_processor_id(), cpu_online_map);
+	if (cpu == NR_CPUS) {
+		cpu = first_cpu(cpu_online_map);
+
+		if (first_pass) {
+			first_pass = 0;
+			event_scan_delay = 30*HZ/rtas_event_scan_rate;
+
+			if (surveillance_timeout != -1) {
+				pr_debug("rtasd: enabling surveillance\n");
+				enable_surveillance(surveillance_timeout);
+				pr_debug("rtasd: surveillance enabled\n");
+			}
+		}
 	}
+
+	schedule_delayed_work_on(cpu, &event_scan_work,
+		__round_jiffies_relative(event_scan_delay, cpu));
+
 	put_online_cpus();
 }
 
-static int rtasd(void *unused)
+static void start_event_scan(void)
 {
 	unsigned int err_type;
 	int rc;
 
-	daemonize("rtasd");
-
 	printk(KERN_DEBUG "RTAS daemon started\n");
 	pr_debug("rtasd: will sleep for %d milliseconds\n",
 		 (30000 / rtas_event_scan_rate));
@@ -434,22 +449,8 @@ static int rtasd(void *unused)
 		}
 	}
 
-	/* First pass. */
-	do_event_scan_all_cpus(1000);
-
-	if (surveillance_timeout != -1) {
-		pr_debug("rtasd: enabling surveillance\n");
-		enable_surveillance(surveillance_timeout);
-		pr_debug("rtasd: surveillance enabled\n");
-	}
-
-	/* Delay should be at least one second since some
-	 * machines have problems if we call event-scan too
-	 * quickly. */
-	for (;;)
-		do_event_scan_all_cpus(30000/rtas_event_scan_rate);
-
-	return -EINVAL;
+	schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
+				 event_scan_delay);
 }
 
 static int __init rtas_init(void)
@@ -487,8 +488,7 @@ static int __init rtas_init(void)
 	if (!entry)
 		printk(KERN_ERR "Failed to create error_log proc entry\n");
 
-	if (kernel_thread(rtasd, NULL, CLONE_FS) < 0)
-		printk(KERN_ERR "Failed to start RTAS daemon\n");
+	start_event_scan();
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ec341707e41..8d75ea21296 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -63,6 +63,7 @@
 #include <asm/smp.h>
 #include <asm/firmware.h>
 #include <asm/eeh.h>
+#include <asm/pSeries_reconfig.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -254,6 +255,29 @@ static void __init pseries_discover_pic(void)
 	       " interrupt-controller\n");
 }
 
+static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
+{
+	struct device_node *np = node;
+	struct pci_dn *pci = NULL;
+	int err = NOTIFY_OK;
+
+	switch (action) {
+	case PSERIES_RECONFIG_ADD:
+		pci = np->parent->data;
+		if (pci)
+			update_dn_pci_info(np, pci->phb);
+		break;
+	default:
+		err = NOTIFY_DONE;
+		break;
+	}
+	return err;
+}
+
+static struct notifier_block pci_dn_reconfig_nb = {
+	.notifier_call = pci_dn_reconfig_notifier,
+};
+
 static void __init pSeries_setup_arch(void)
 {
 	/* Discover PIC type and setup ppc_md accordingly */
@@ -271,6 +295,7 @@ static void __init pSeries_setup_arch(void)
 	/* Find and initialize PCI host bridges */
 	init_pci_config_tokens();
 	find_and_init_phbs();
+	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
 	eeh_init();
 
 	pSeries_nvram_init();
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index b33b28a6fe1..2d1c87dd5d1 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_IPIC)		+= ipic.o
 obj-$(CONFIG_4xx)		+= uic.o
 obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o
 obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
+obj-$(CONFIG_XILINX_PCI)	+= xilinx_pci.o
 obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index fd969f0e312..eb5927212fa 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -61,7 +61,7 @@ EXPORT_SYMBOL(cpm2_immr);
 void __init cpm2_reset(void)
 {
 #ifdef CONFIG_PPC_85xx
-	cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
 #else
 	cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
 #endif
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index f25ce818d40..da38a1ff97b 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -113,8 +113,13 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 				  struct msi_msg *msg)
 {
 	struct fsl_msi *msi_data = fsl_msi;
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	u32 base = 0;
 
-	msg->address_lo = msi_data->msi_addr_lo;
+	pci_bus_read_config_dword(hose->bus,
+		PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base);
+
+	msg->address_lo = msi_data->msi_addr_lo + base;
 	msg->address_hi = msi_data->msi_addr_hi;
 	msg->data = hwirq;
 
@@ -271,7 +276,7 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 	msi->irqhost->host_data = msi;
 
 	msi->msi_addr_hi = 0x0;
-	msi->msi_addr_lo = res.start + features->msiir_offset;
+	msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff);
 
 	rc = fsl_msi_init_allocator(msi);
 	if (rc) {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 78021d8afc5..ae88b144801 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,6 +23,8 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
+#include <linux/log2.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -96,7 +98,13 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 				  struct resource *rsrc)
 {
 	struct ccsr_pci __iomem *pci;
-	int i, j, n;
+	int i, j, n, mem_log, win_idx = 2;
+	u64 mem, sz, paddr_hi = 0;
+	u64 paddr_lo = ULLONG_MAX;
+	u32 pcicsrbar = 0, pcicsrbar_sz;
+	u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
+			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+	char *name = hose->dn->full_name;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		    (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
@@ -117,6 +125,9 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 		if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
 			continue;
 
+		paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start);
+		paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end);
+
 		n = setup_one_atmu(pci, j, &hose->mem_resources[i],
 				   hose->pci_mem_offset);
 
@@ -147,10 +158,105 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 		}
 	}
 
-	/* Setup 2G inbound Memory Window @ 1 */
-	out_be32(&pci->piw[2].pitar, 0x00000000);
-	out_be32(&pci->piw[2].piwbar,0x00000000);
-	out_be32(&pci->piw[2].piwar, PIWAR_2G);
+	/* convert to pci address space */
+	paddr_hi -= hose->pci_mem_offset;
+	paddr_lo -= hose->pci_mem_offset;
+
+	if (paddr_hi == paddr_lo) {
+		pr_err("%s: No outbound window space\n", name);
+		return ;
+	}
+
+	if (paddr_lo == 0) {
+		pr_err("%s: No space for inbound window\n", name);
+		return ;
+	}
+
+	/* setup PCSRBAR/PEXCSRBAR */
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
+	early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
+	pcicsrbar_sz = ~pcicsrbar_sz + 1;
+
+	if (paddr_hi < (0x100000000ull - pcicsrbar_sz) ||
+		(paddr_lo > 0x100000000ull))
+		pcicsrbar = 0x100000000ull - pcicsrbar_sz;
+	else
+		pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz;
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar);
+
+	paddr_lo = min(paddr_lo, (u64)pcicsrbar);
+
+	pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
+
+	/* Setup inbound mem window */
+	mem = lmb_end_of_DRAM();
+	sz = min(mem, paddr_lo);
+	mem_log = __ilog2_u64(sz);
+
+	/* PCIe can overmap inbound & outbound since RX & TX are separated */
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		/* Size window to exact size if power-of-two or one size up */
+		if ((1ull << mem_log) != mem) {
+			if ((1ull << mem_log) > mem)
+				pr_info("%s: Setting PCI inbound window "
+					"greater than memory size\n", name);
+			mem_log++;
+		}
+
+		piwar |= (mem_log - 1);
+
+		/* Setup inbound memory window */
+		out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+		out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
+		out_be32(&pci->piw[win_idx].piwar,  piwar);
+		win_idx--;
+
+		hose->dma_window_base_cur = 0x00000000;
+		hose->dma_window_size = (resource_size_t)sz;
+	} else {
+		u64 paddr = 0;
+
+		/* Setup inbound memory window */
+		out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
+		out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+		out_be32(&pci->piw[win_idx].piwar,  (piwar | (mem_log - 1)));
+		win_idx--;
+
+		paddr += 1ull << mem_log;
+		sz -= 1ull << mem_log;
+
+		if (sz) {
+			mem_log = __ilog2_u64(sz);
+			piwar |= (mem_log - 1);
+
+			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwar,  piwar);
+			win_idx--;
+
+			paddr += 1ull << mem_log;
+		}
+
+		hose->dma_window_base_cur = 0x00000000;
+		hose->dma_window_size = (resource_size_t)paddr;
+	}
+
+	if (hose->dma_window_size < mem) {
+#ifndef CONFIG_SWIOTLB
+		pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
+			"map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
+			 name);
+#endif
+		/* adjusting outbound windows could reclaim space in mem map */
+		if (paddr_hi < 0xffffffffull)
+			pr_warning("%s: WARNING: Outbound window cfg leaves "
+				"gaps in memory map. Adjusting the memory map "
+				"could reduce unnecessary bounce buffering.\n",
+				name);
+
+		pr_info("%s: DMA window size is 0x%llx\n", name,
+			(u64)hose->dma_window_size);
+	}
 
 	iounmap(pci);
 }
@@ -176,19 +282,9 @@ static void __init setup_pci_cmd(struct pci_controller *hose)
 	}
 }
 
-static void __init setup_pci_pcsrbar(struct pci_controller *hose)
-{
-#ifdef CONFIG_PCI_MSI
-	phys_addr_t immr_base;
-
-	immr_base = get_immrbase();
-	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
-#endif
-}
-
 void fsl_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	int i;
 
 	if ((bus->parent == hose->bus) &&
@@ -269,8 +365,6 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose, &rsrc);
 
-	/* Setup PEXCSRBAR */
-	setup_pci_pcsrbar(hose);
 	return 0;
 }
 
@@ -281,6 +375,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
@@ -296,6 +392,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
 #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
@@ -324,7 +422,7 @@ struct mpc83xx_pcie_priv {
 
 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -350,7 +448,7 @@ static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
 static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
 					    unsigned int devfn, int offset)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct mpc83xx_pcie_priv *pcie = hose->dn->data;
 	u8 bus_no = bus->number - hose->first_busno;
 	u32 dev_base = bus_no << 24 | devfn << 16;
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 13f30c2a61e..a9d8bbebed8 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -16,7 +16,11 @@
 
 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
 #define PCIE_LTSSM_L0	0x16		/* L0 state */
-#define PIWAR_2G	0xa0f5501e	/* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+#define PIWAR_EN		0x80000000	/* Enable */
+#define PIWAR_PF		0x20000000	/* prefetch */
+#define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
+#define PIWAR_READ_SNOOP	0x00050000
+#define PIWAR_WRITE_SNOOP	0x00005000
 
 /* PCI/PCI Express outbound window reg */
 struct pci_outbound_window_regs {
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index abdb124e1e2..39db9d1155d 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1026,8 +1026,7 @@ int fsl_rio_setup(struct of_device *dev)
 		return -EFAULT;
 	}
 	dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
-	dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n",	regs.start,
-						regs.end - regs.start + 1);
+	dev_info(&dev->dev, "Regs: %pR\n", &regs);
 
 	dt_range = of_get_property(dev->node, "ranges", &rlen);
 	if (!dt_range) {
@@ -1077,8 +1076,9 @@ int fsl_rio_setup(struct of_device *dev)
 
 	INIT_LIST_HEAD(&port->dbells);
 	port->iores.start = law_start;
-	port->iores.end = law_start + law_size;
+	port->iores.end = law_start + law_size - 1;
 	port->iores.flags = IORESOURCE_MEM;
+	port->iores.name = "rio_io_win";
 
 	priv->bellirq = irq_of_parse_and_map(dev->node, 2);
 	priv->txirq = irq_of_parse_and_map(dev->node, 3);
@@ -1156,14 +1156,15 @@ int fsl_rio_setup(struct of_device *dev)
 		out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
 
 	/* Configure maintenance transaction window */
-	out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
-	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
+	out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
+	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);	/* 4M */
 
 	priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
 
 	/* Configure outbound doorbell window */
-	out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
-	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
+	out_be32(&priv->dbell_atmu_regs->rowbar,
+			(law_start + RIO_MAINT_WIN_SIZE) >> 12);
+	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);	/* 4k */
 	fsl_rio_doorbell_init(port);
 
 	return 0;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 5c64ccd402e..95dbc643c4f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -379,16 +379,10 @@ static int __init setup_rstcr(void)
 	struct device_node *np;
 	np = of_find_node_by_name(NULL, "global-utilities");
 	if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) {
-		const u32 *prop = of_get_property(np, "reg", NULL);
-		if (prop) {
-			/* map reset control register
-			 * 0xE00B0 is offset of reset control register
-			 */
-			rstcr = ioremap(get_immrbase() + *prop + 0xB0, 0xff);
-			if (!rstcr)
-				printk (KERN_EMERG "Error: reset control "
-						"register not mapped!\n");
-		}
+		rstcr = of_iomap(np, 0) + 0xb0;
+		if (!rstcr)
+			printk (KERN_EMERG "Error: reset control register "
+					"not mapped!\n");
 	} else
 		printk (KERN_INFO "rstcr compatible register does not exist!\n");
 	if (np)
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 7fd49c97501..7ed80967664 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -24,7 +24,7 @@ static int
 indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 *val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
 	u32 bus_no, reg;
@@ -82,7 +82,7 @@ static int
 indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		      int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
 	u32 bus_no, reg;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 352d8c3ef52..9c3af504549 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -613,23 +613,23 @@ static int irq_choose_cpu(unsigned int virt_irq)
 #define mpic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
 
 /* Find an mpic associated with a given linux interrupt */
-static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
+static struct mpic *mpic_find(unsigned int irq)
 {
-	unsigned int src = mpic_irq_to_hw(irq);
-	struct mpic *mpic;
-
 	if (irq < NUM_ISA_INTERRUPTS)
 		return NULL;
 
-	mpic = irq_desc[irq].chip_data;
+	return irq_desc[irq].chip_data;
+}
 
-	if (is_ipi)
-		*is_ipi = (src >= mpic->ipi_vecs[0] &&
-			   src <= mpic->ipi_vecs[3]);
+/* Determine if the linux irq is an IPI */
+static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
+{
+	unsigned int src = mpic_irq_to_hw(irq);
 
-	return mpic;
+	return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
 }
 
+
 /* Convert a cpu mask from logical to physical cpu numbers. */
 static inline u32 mpic_physmask(u32 cpumask)
 {
@@ -1383,8 +1383,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
 
 void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 {
-	unsigned int is_ipi;
-	struct mpic *mpic = mpic_find(irq, &is_ipi);
+	struct mpic *mpic = mpic_find(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
 	u32 reg;
@@ -1393,7 +1392,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 		return;
 
 	spin_lock_irqsave(&mpic_lock, flags);
-	if (is_ipi) {
+	if (mpic_is_ipi(mpic, irq)) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(src - mpic->ipi_vecs[0],
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 6a2d473c345..daefc93ddff 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1295,7 +1295,7 @@ static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port
 static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 				    int offset, int len, u32 *val)
 {
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct ppc4xx_pciex_port *port =
 		&ppc4xx_pciex_ports[hose->indirect_type];
 	void __iomem *addr;
@@ -1352,7 +1352,7 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
 				     int offset, int len, u32 val)
 {
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct ppc4xx_pciex_port *port =
 		&ppc4xx_pciex_ports[hose->indirect_type];
 	void __iomem *addr;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 01bce3784b0..b28b0e512d6 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -61,6 +61,7 @@ struct qe_immap __iomem *qe_immr;
 EXPORT_SYMBOL(qe_immr);
 
 static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
@@ -264,10 +265,14 @@ static void qe_snums_init(void)
 		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
 		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
 		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
 	};
 
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	qe_num_of_snum = qe_get_num_of_snums();
+
+	for (i = 0; i < qe_num_of_snum; i++) {
 		snums[i].num = snum_init[i];
 		snums[i].state = QE_SNUM_STATE_FREE;
 	}
@@ -280,7 +285,7 @@ int qe_get_snum(void)
 	int i;
 
 	spin_lock_irqsave(&qe_lock, flags);
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	for (i = 0; i < qe_num_of_snum; i++) {
 		if (snums[i].state == QE_SNUM_STATE_FREE) {
 			snums[i].state = QE_SNUM_STATE_USED;
 			snum = snums[i].num;
@@ -297,7 +302,7 @@ void qe_put_snum(u8 snum)
 {
 	int i;
 
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	for (i = 0; i < qe_num_of_snum; i++) {
 		if (snums[i].num == snum) {
 			snums[i].state = QE_SNUM_STATE_FREE;
 			break;
@@ -575,3 +580,65 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 }
 EXPORT_SYMBOL(qe_get_firmware_info);
 
+unsigned int qe_get_num_of_risc(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_risc = 0;
+	const u32 *prop;
+
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_risc;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+	if (prop && size == sizeof(*prop))
+		num_of_risc = *prop;
+
+	of_node_put(qe);
+
+	return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
+unsigned int qe_get_num_of_snums(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_snums;
+	const u32 *prop;
+
+	num_of_snums = 28; /* The default number of snum for threads is 28 */
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_snums;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+	if (prop && size == sizeof(*prop)) {
+		num_of_snums = *prop;
+		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+			/* No QE ever has fewer than 28 SNUMs */
+			pr_err("QE: number of snum is invalid\n");
+			return -EINVAL;
+		}
+	}
+
+	of_node_put(qe);
+
+	return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 24e1f5a197a..cf244a419e9 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -63,7 +63,7 @@ tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
 			   int offset, int len, u32 val)
 {
 	volatile unsigned char *cfg_addr;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
@@ -149,7 +149,7 @@ tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			  int len, u32 * val)
 {
 	volatile unsigned char *cfg_addr;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 temp;
 
 	if (ppc_md.pci_exclude_device)
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index c658b413c9b..3ee1fd37bbf 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -25,6 +25,7 @@
 #include <linux/of.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/i8259.h>
 #include <asm/irq.h>
 
 /*
@@ -191,20 +192,14 @@ struct irq_host * __init
 xilinx_intc_init(struct device_node *np)
 {
 	struct irq_host * irq;
-	struct resource res;
 	void * regs;
-	int rc;
 
 	/* Find and map the intc registers */
-	rc = of_address_to_resource(np, 0, &res);
-	if (rc) {
-		printk(KERN_ERR __FILE__ ": of_address_to_resource() failed\n");
+	regs = of_iomap(np, 0);
+	if (!regs) {
+		pr_err("xilinx_intc: could not map registers\n");
 		return NULL;
 	}
-	regs = ioremap(res.start, 32);
-
-	printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
-		(unsigned long long) res.start, regs);
 
 	/* Setup interrupt controller */
 	out_be32(regs + XINTC_IER, 0); /* disable all irqs */
@@ -217,6 +212,7 @@ xilinx_intc_init(struct device_node *np)
 	if (!irq)
 		panic(__FILE__ ": Cannot allocate IRQ host\n");
 	irq->host_data = regs;
+
 	return irq;
 }
 
@@ -227,23 +223,70 @@ int xilinx_intc_get_irq(void)
 	return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
 }
 
+#if defined(CONFIG_PPC_I8259)
+/*
+ * Support code for cascading to 8259 interrupt controllers
+ */
+static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+	if (cascade_irq)
+		generic_handle_irq(cascade_irq);
+
+	/* Let xilinx_intc end the interrupt */
+	desc->chip->ack(irq);
+	desc->chip->unmask(irq);
+}
+
+static void __init xilinx_i8259_setup_cascade(void)
+{
+	struct device_node *cascade_node;
+	int cascade_irq;
+
+	/* Initialize i8259 controller */
+	cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!cascade_node)
+		return;
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (!cascade_irq) {
+		pr_err("virtex_ml510: Failed to map cascade interrupt\n");
+		goto out;
+	}
+
+	i8259_init(cascade_node, 0);
+	set_irq_chained_handler(cascade_irq, xilinx_i8259_cascade);
+
+	/* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
+	/* This looks like a dirty hack to me --gcl */
+	outb(0xc0, 0x4d0);
+	outb(0xc0, 0x4d1);
+
+ out:
+	of_node_put(cascade_node);
+}
+#else
+static inline void xilinx_i8259_setup_cascade(void) { return; }
+#endif /* defined(CONFIG_PPC_I8259) */
+
+static struct of_device_id xilinx_intc_match[] __initconst = {
+	{ .compatible = "xlnx,opb-intc-1.00.c", },
+	{ .compatible = "xlnx,xps-intc-1.00.a", },
+	{}
+};
+
+/*
+ * Initialize master Xilinx interrupt controller
+ */
 void __init xilinx_intc_init_tree(void)
 {
 	struct device_node *np;
 
 	/* find top level interrupt controller */
-	for_each_compatible_node(np, NULL, "xlnx,opb-intc-1.00.c") {
+	for_each_matching_node(np, xilinx_intc_match) {
 		if (!of_get_property(np, "interrupts", NULL))
 			break;
 	}
-	if (!np) {
-		for_each_compatible_node(np, NULL, "xlnx,xps-intc-1.00.a") {
-			if (!of_get_property(np, "interrupts", NULL))
-				break;
-		}
-	}
-
-	/* xilinx interrupt controller needs to be top level */
 	BUG_ON(!np);
 
 	master_irqhost = xilinx_intc_init(np);
@@ -251,4 +294,6 @@ void __init xilinx_intc_init_tree(void)
 
 	irq_set_default_host(master_irqhost);
 	of_node_put(np);
+
+	xilinx_i8259_setup_cascade();
 }
diff --git a/arch/powerpc/sysdev/xilinx_pci.c b/arch/powerpc/sysdev/xilinx_pci.c
new file mode 100644
index 00000000000..1453b0eed22
--- /dev/null
+++ b/arch/powerpc/sysdev/xilinx_pci.c
@@ -0,0 +1,132 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <mm/mmu_decl.h>
+#include <asm/io.h>
+#include <asm/xilinx_pci.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS  0x114
+
+#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+
+static struct of_device_id xilinx_pci_match[] = {
+	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
+	{}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn || dev->bus->self)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose)
+		return;
+
+	if (!of_match_node(xilinx_pci_match, hose->dn))
+		return;
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+		 pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack.  Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+	return (bus != 0);
+}
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+	struct pci_controller *hose;
+	struct resource r;
+	void __iomem *pci_reg;
+	struct device_node *pci_node;
+
+	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+	if(!pci_node)
+		return;
+
+	if (of_address_to_resource(pci_node, 0, &r)) {
+		pr_err("xilinx-pci: cannot resolve base address\n");
+		return;
+	}
+
+	hose = pcibios_alloc_controller(pci_node);
+	if (!hose) {
+		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+		return;
+	}
+
+	/* Setup config space */
+	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+			   r.start + XPLB_PCI_DATA,
+			   PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* According to the xilinx plbv46_pci documentation the soft-core starts
+	 * a self-init when the bus master enable bit is set. Without this bit
+	 * set the pci bus can't be scanned.
+	 */
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+	/* Set the max latency timer to 255 */
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+	/* Set the max bus number to 255 */
+	pci_reg = of_iomap(pci_node, 0);
+	out_8(pci_reg + XPLB_PCI_BUS, 0xff);
+	iounmap(pci_reg);
+
+	/* Nothing past the root bridge is working right now.  By default
+	 * exclude config access to anything except bus 0 */
+	if (!ppc_md.pci_exclude_device)
+		ppc_md.pci_exclude_device = xilinx_pci_exclude_device;
+
+	/* Register the host bridge with the linux kernel! */
+	pci_process_bridge_OF_ranges(hose, pci_node, 1);
+
+	pr_info("xilinx-pci: Registered PCI host bridge\n");
+}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 8dfad7d9a00..e1f33a81e5e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -110,6 +110,7 @@ static int bsesc(void);
 static void dump(void);
 static void prdump(unsigned long, long);
 static int ppc_inst_dump(unsigned long, long, int);
+static void dump_log_buf(void);
 static void backtrace(struct pt_regs *);
 static void excprint(struct pt_regs *);
 static void prregs(struct pt_regs *);
@@ -197,6 +198,7 @@ Commands:\n\
   di	dump instructions\n\
   df	dump float values\n\
   dd	dump double values\n\
+  dl    dump the kernel log buffer\n\
   dr	dump stream of raw bytes\n\
   e	print exception information\n\
   f	flush cache\n\
@@ -2009,6 +2011,8 @@ dump(void)
 			nidump = MAX_DUMP;
 		adrs += ppc_inst_dump(adrs, nidump, 1);
 		last_cmd = "di\n";
+	} else if (c == 'l') {
+		dump_log_buf();
 	} else if (c == 'r') {
 		scanhex(&ndump);
 		if (ndump == 0)
@@ -2122,6 +2126,49 @@ print_address(unsigned long addr)
 	xmon_print_symbol(addr, "\t# ", "");
 }
 
+void
+dump_log_buf(void)
+{
+        const unsigned long size = 128;
+        unsigned long end, addr;
+        unsigned char buf[size + 1];
+
+        addr = 0;
+        buf[size] = '\0';
+
+        if (setjmp(bus_error_jmp) != 0) {
+                printf("Unable to lookup symbol __log_buf!\n");
+                return;
+        }
+
+        catch_memory_errors = 1;
+        sync();
+        addr = kallsyms_lookup_name("__log_buf");
+
+        if (! addr)
+                printf("Symbol __log_buf not found!\n");
+        else {
+                end = addr + (1 << CONFIG_LOG_BUF_SHIFT);
+                while (addr < end) {
+                        if (! mread(addr, buf, size)) {
+                                printf("Can't read memory at address 0x%lx\n", addr);
+                                break;
+                        }
+
+                        printf("%s", buf);
+
+                        if (strlen(buf) < size)
+                                break;
+
+                        addr += size;
+                }
+        }
+
+        sync();
+        /* wait a little while to see if we get a machine check */
+        __delay(200);
+        catch_memory_errors = 0;
+}
 
 /*
  * Memory operations - move, set, print differences
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2eca5fe0e75..a14dba0e4d6 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -82,6 +82,11 @@ config S390
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FTRACE_SYSCALLS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_DEFAULT_NO_SPIN_MUTEXES
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
@@ -343,6 +348,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
+config ARCH_HIBERNATION_POSSIBLE
+       def_bool y if 64BIT
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -567,6 +575,30 @@ bool "s390 guest support for KVM (EXPERIMENTAL)"
 	  the KVM hypervisor. This will add detection for KVM as well  as a
 	  virtio transport. If KVM is detected, the virtio console will be
 	  the default console.
+
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y.
+
+endmenu
+
+menu "Power Management"
+
+source "kernel/power/Kconfig"
+
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 578c61f15a4..0ff387cebf8 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -88,7 +88,9 @@ LDFLAGS_vmlinux := -e start
 head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
 
 core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
-		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
+		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
+		   arch/s390/power/
+
 libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
 drivers-$(CONFIG_MATHEMU) += arch/s390/math-emu/
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 1dfc7100c7e..264528e4f58 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -5,7 +5,7 @@
  * Exports appldata_register_ops() and appldata_unregister_ops() for the
  * data gathering modules.
  *
- * Copyright IBM Corp. 2003, 2008
+ * Copyright IBM Corp. 2003, 2009
  *
  * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
@@ -26,6 +26,8 @@
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/workqueue.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
 #include <asm/appldata.h>
 #include <asm/timer.h>
 #include <asm/uaccess.h>
@@ -41,6 +43,9 @@
 
 #define TOD_MICRO	0x01000			/* nr. of TOD clock units
 						   for 1 microsecond */
+
+static struct platform_device *appldata_pdev;
+
 /*
  * /proc entries (sysctl)
  */
@@ -86,6 +91,7 @@ static atomic_t appldata_expire_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(appldata_timer_lock);
 static int appldata_interval = APPLDATA_CPU_INTERVAL;
 static int appldata_timer_active;
+static int appldata_timer_suspended = 0;
 
 /*
  * Work queue
@@ -475,6 +481,93 @@ void appldata_unregister_ops(struct appldata_ops *ops)
 /********************** module-ops management <END> **************************/
 
 
+/**************************** suspend / resume *******************************/
+static int appldata_freeze(struct device *dev)
+{
+	struct appldata_ops *ops;
+	int rc;
+	struct list_head *lh;
+
+	get_online_cpus();
+	spin_lock(&appldata_timer_lock);
+	if (appldata_timer_active) {
+		__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
+		appldata_timer_suspended = 1;
+	}
+	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
+
+	mutex_lock(&appldata_ops_mutex);
+	list_for_each(lh, &appldata_ops_list) {
+		ops = list_entry(lh, struct appldata_ops, list);
+		if (ops->active == 1) {
+			rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
+			if (rc != 0)
+				pr_err("Stopping the data collection for %s "
+				       "failed with rc=%d\n", ops->name, rc);
+		}
+	}
+	mutex_unlock(&appldata_ops_mutex);
+	return 0;
+}
+
+static int appldata_restore(struct device *dev)
+{
+	struct appldata_ops *ops;
+	int rc;
+	struct list_head *lh;
+
+	get_online_cpus();
+	spin_lock(&appldata_timer_lock);
+	if (appldata_timer_suspended) {
+		__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
+		appldata_timer_suspended = 0;
+	}
+	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
+
+	mutex_lock(&appldata_ops_mutex);
+	list_for_each(lh, &appldata_ops_list) {
+		ops = list_entry(lh, struct appldata_ops, list);
+		if (ops->active == 1) {
+			ops->callback(ops->data);	// init record
+			rc = appldata_diag(ops->record_nr,
+					APPLDATA_START_INTERVAL_REC,
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
+			if (rc != 0) {
+				pr_err("Starting the data collection for %s "
+				       "failed with rc=%d\n", ops->name, rc);
+			}
+		}
+	}
+	mutex_unlock(&appldata_ops_mutex);
+	return 0;
+}
+
+static int appldata_thaw(struct device *dev)
+{
+	return appldata_restore(dev);
+}
+
+static struct dev_pm_ops appldata_pm_ops = {
+	.freeze		= appldata_freeze,
+	.thaw		= appldata_thaw,
+	.restore	= appldata_restore,
+};
+
+static struct platform_driver appldata_pdrv = {
+	.driver = {
+		.name	= "appldata",
+		.owner	= THIS_MODULE,
+		.pm	= &appldata_pm_ops,
+	},
+};
+/************************* suspend / resume <END> ****************************/
+
+
 /******************************* init / exit *********************************/
 
 static void __cpuinit appldata_online_cpu(int cpu)
@@ -531,11 +624,23 @@ static struct notifier_block __cpuinitdata appldata_nb = {
  */
 static int __init appldata_init(void)
 {
-	int i;
+	int i, rc;
+
+	rc = platform_driver_register(&appldata_pdrv);
+	if (rc)
+		return rc;
 
+	appldata_pdev = platform_device_register_simple("appldata", -1, NULL,
+							0);
+	if (IS_ERR(appldata_pdev)) {
+		rc = PTR_ERR(appldata_pdev);
+		goto out_driver;
+	}
 	appldata_wq = create_singlethread_workqueue("appldata");
-	if (!appldata_wq)
-		return -ENOMEM;
+	if (!appldata_wq) {
+		rc = -ENOMEM;
+		goto out_device;
+	}
 
 	get_online_cpus();
 	for_each_online_cpu(i)
@@ -547,6 +652,12 @@ static int __init appldata_init(void)
 
 	appldata_sysctl_header = register_sysctl_table(appldata_dir_table);
 	return 0;
+
+out_device:
+	platform_device_unregister(appldata_pdev);
+out_driver:
+	platform_driver_unregister(&appldata_pdrv);
+	return rc;
 }
 
 __initcall(appldata_init);
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index de432f2de2d..fca9dffcc66 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -275,6 +275,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define smp_mb__before_atomic_inc()	smp_mb()
 #define smp_mb__after_atomic_inc()	smp_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __KERNEL__ */
 #endif /* __ARCH_S390_ATOMIC__  */
diff --git a/arch/s390/include/asm/bitsperlong.h b/arch/s390/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6b235aea9c6
--- /dev/null
+++ b/arch/s390/include/asm/bitsperlong.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_S390_BITSPERLONG_H
+#define __ASM_S390_BITSPERLONG_H
+
+#ifndef __s390x__
+#define __BITS_PER_LONG 32
+#else
+#define __BITS_PER_LONG 64
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_S390_BITSPERLONG_H */
+
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index ba007d8df94..2a541955117 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -1,11 +1,9 @@
 /*
- *  include/asm-s390/ccwdev.h
- *  include/asm-s390x/ccwdev.h
+ * Copyright  IBM Corp. 2002, 2009
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
+ * Author(s): Arnd Bergmann <arndb@de.ibm.com>
  *
- *  Interface for CCW device drivers
+ * Interface for CCW device drivers
  */
 #ifndef _S390_CCWDEV_H_
 #define _S390_CCWDEV_H_
@@ -104,6 +102,11 @@ struct ccw_device {
  * @set_offline: called when setting device offline
  * @notify: notify driver of device state changes
  * @shutdown: called at device shutdown
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @driver: embedded device driver structure
  * @name: device driver name
  */
@@ -116,6 +119,11 @@ struct ccw_driver {
 	int (*set_offline) (struct ccw_device *);
 	int (*notify) (struct ccw_device *, int);
 	void (*shutdown) (struct ccw_device *);
+	int (*prepare) (struct ccw_device *);
+	void (*complete) (struct ccw_device *);
+	int (*freeze)(struct ccw_device *);
+	int (*thaw) (struct ccw_device *);
+	int (*restore)(struct ccw_device *);
 	struct device_driver driver;
 	char *name;
 };
@@ -184,6 +192,7 @@ extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
 #define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
 
 extern struct ccw_device *ccw_device_probe_console(void);
+extern int ccw_device_force_console(void);
 
 // FIXME: these have to go
 extern int _ccw_device_get_subchannel_number(struct ccw_device *);
diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
index a27f68985a7..c79c1e787b8 100644
--- a/arch/s390/include/asm/ccwgroup.h
+++ b/arch/s390/include/asm/ccwgroup.h
@@ -38,6 +38,11 @@ struct ccwgroup_device {
  * @set_online: function called when device is set online
  * @set_offline: function called when device is set offline
  * @shutdown: function called when device is shut down
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @driver: embedded driver structure
  */
 struct ccwgroup_driver {
@@ -51,6 +56,11 @@ struct ccwgroup_driver {
 	int (*set_online) (struct ccwgroup_device *);
 	int (*set_offline) (struct ccwgroup_device *);
 	void (*shutdown)(struct ccwgroup_device *);
+	int (*prepare) (struct ccwgroup_device *);
+	void (*complete) (struct ccwgroup_device *);
+	int (*freeze)(struct ccwgroup_device *);
+	int (*thaw) (struct ccwgroup_device *);
+	int (*restore)(struct ccwgroup_device *);
 
 	struct device_driver driver;
 };
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index de065b32381..01a08020bc0 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -5,6 +5,7 @@
  */
 #include <linux/types.h>
 #include <linux/sched.h>
+#include <linux/thread_info.h>
 
 #define PSW32_MASK_PER		0x40000000UL
 #define PSW32_MASK_DAT		0x04000000UL
@@ -163,12 +164,28 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
+#ifdef CONFIG_COMPAT
+
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_31BIT);
+}
+
+#else
+
+static inline int is_compat_task(void)
+{
+	return 0;
+}
+
+#endif
+
 static inline void __user *compat_alloc_user_space(long len)
 {
 	unsigned long stack;
 
 	stack = KSTK_ESP(current);
-	if (test_thread_flag(TIF_31BIT))
+	if (is_compat_task())
 		stack &= 0x7fffffffUL;
 	return (void __user *) (stack - len);
 }
diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
deleted file mode 100644
index d60a2eefb17..00000000000
--- a/arch/s390/include/asm/cpu.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  include/asm-s390/cpu.h
- *
- *    Copyright IBM Corp. 2007
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPU_H_
-#define _ASM_S390_CPU_H_
-
-#include <linux/types.h>
-#include <linux/percpu.h>
-#include <linux/spinlock.h>
-
-struct s390_idle_data {
-	spinlock_t lock;
-	unsigned long long idle_count;
-	unsigned long long idle_enter;
-	unsigned long long idle_time;
-};
-
-DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
-
-void vtime_start_cpu(void);
-
-static inline void s390_idle_check(void)
-{
-	if ((&__get_cpu_var(s390_idle))->idle_enter != 0ULL)
-		vtime_start_cpu();
-}
-
-#endif /* _ASM_S390_CPU_H_ */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 941384fbd39..ec917d42ee6 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -9,6 +9,9 @@
 #ifndef _S390_CPUTIME_H
 #define _S390_CPUTIME_H
 
+#include <linux/types.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
 #include <asm/div64.h>
 
 /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */
@@ -174,8 +177,24 @@ cputime64_to_clock_t(cputime64_t cputime)
        return __div(cputime, 4096000000ULL / USER_HZ);
 }
 
+struct s390_idle_data {
+	spinlock_t lock;
+	unsigned long long idle_count;
+	unsigned long long idle_enter;
+	unsigned long long idle_time;
+};
+
+DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
+
+void vtime_start_cpu(void);
 cputime64_t s390_get_idle_time(int cpu);
 
 #define arch_idle_time(cpu) s390_get_idle_time(cpu)
 
+static inline void s390_idle_check(void)
+{
+	if ((&__get_cpu_var(s390_idle))->idle_enter != 0ULL)
+		vtime_start_cpu();
+}
+
 #endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 5a5bc75e19d..96c14a9102b 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -2,7 +2,28 @@
 #define _ASM_S390_FTRACE_H
 
 #ifndef __ASSEMBLY__
+
 extern void _mcount(void);
+extern unsigned long ftrace_dyn_func;
+
+struct dyn_arch_ftrace { };
+
+#define MCOUNT_ADDR ((long)_mcount)
+
+#ifdef CONFIG_64BIT
+#define MCOUNT_OFFSET_RET 18
+#define MCOUNT_INSN_SIZE  24
+#define MCOUNT_OFFSET	  14
+#else
+#define MCOUNT_OFFSET_RET 26
+#define MCOUNT_INSN_SIZE  30
+#define MCOUNT_OFFSET	   8
 #endif
 
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr - MCOUNT_OFFSET;
+}
+
+#endif /* __ASSEMBLY__ */
 #endif /* _ASM_S390_FTRACE_H */
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 3aeca492b14..5046ad6b7a6 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -30,6 +30,7 @@
 #define __LC_SUBCHANNEL_NR		0x00ba
 #define __LC_IO_INT_PARM		0x00bc
 #define __LC_IO_INT_WORD		0x00c0
+#define __LC_STFL_FAC_LIST		0x00c8
 #define __LC_MCCK_CODE			0x00e8
 
 #define __LC_DUMP_REIPL			0x0e00
@@ -67,6 +68,7 @@
 #define __LC_CPUID			0x02b0
 #define __LC_INT_CLOCK			0x02c8
 #define __LC_MACHINE_FLAGS		0x02d8
+#define __LC_FTRACE_FUNC		0x02dc
 #define __LC_IRB			0x0300
 #define __LC_PFAULT_INTPARM		0x0080
 #define __LC_CPU_TIMER_SAVE_AREA	0x00d8
@@ -112,6 +114,7 @@
 #define __LC_INT_CLOCK			0x0340
 #define __LC_VDSO_PER_CPU		0x0350
 #define __LC_MACHINE_FLAGS		0x0358
+#define __LC_FTRACE_FUNC		0x0360
 #define __LC_IRB			0x0380
 #define __LC_PASTE			0x03c0
 #define __LC_PFAULT_INTPARM		0x11b8
@@ -280,7 +283,8 @@ struct _lowcore
 	__u64	int_clock;			/* 0x02c8 */
 	__u64	clock_comparator;		/* 0x02d0 */
 	__u32	machine_flags;			/* 0x02d8 */
-	__u8	pad_0x02dc[0x0300-0x02dc];	/* 0x02dc */
+	__u32	ftrace_func;			/* 0x02dc */
+	__u8	pad_0x02f0[0x0300-0x02f0];	/* 0x02f0 */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
@@ -385,7 +389,8 @@ struct _lowcore
 	__u64	clock_comparator;		/* 0x0348 */
 	__u64	vdso_per_cpu_data;		/* 0x0350 */
 	__u64	machine_flags;			/* 0x0358 */
-	__u8	pad_0x0360[0x0380-0x0360];	/* 0x0360 */
+	__u64	ftrace_func;			/* 0x0360 */
+	__u8	pad_0x0368[0x0380-0x0368];	/* 0x0368 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
index da01432e8f4..f63fe7b431e 100644
--- a/arch/s390/include/asm/mman.h
+++ b/arch/s390/include/asm/mman.h
@@ -9,7 +9,7 @@
 #ifndef __S390_MMAN_H__
 #define __S390_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 32e8f6aa438..3e3594d01f8 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -150,7 +150,7 @@ void arch_alloc_page(struct page *page, int order);
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #define __HAVE_ARCH_GATE_AREA 1
 
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 5caddd4f7be..60a7b1a1702 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -112,12 +112,15 @@ extern char empty_zero_page[PAGE_SIZE];
  * effect, this also makes sure that 64 bit module code cannot be used
  * as system call address.
  */
+
+extern unsigned long VMALLOC_START;
+
 #ifndef __s390x__
-#define VMALLOC_START	0x78000000UL
+#define VMALLOC_SIZE	(96UL << 20)
 #define VMALLOC_END	0x7e000000UL
 #define VMEM_MAP_END	0x80000000UL
 #else /* __s390x__ */
-#define VMALLOC_START	0x3e000000000UL
+#define VMALLOC_SIZE	(1UL << 30)
 #define VMALLOC_END	0x3e040000000UL
 #define VMEM_MAP_END	0x40000000000UL
 #endif /* __s390x__ */
diff --git a/arch/s390/include/asm/seccomp.h b/arch/s390/include/asm/seccomp.h
new file mode 100644
index 00000000000..781a9cf9b00
--- /dev/null
+++ b/arch/s390/include/asm/seccomp.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_S390_SECCOMP_H
+#define _ASM_S390_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read	__NR_read
+#define __NR_seccomp_write	__NR_write
+#define __NR_seccomp_exit	__NR_exit
+#define __NR_seccomp_sigreturn	__NR_sigreturn
+
+#define __NR_seccomp_read_32	__NR_read
+#define __NR_seccomp_write_32	__NR_write
+#define __NR_seccomp_exit_32	__NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif	/* _ASM_S390_SECCOMP_H */
diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h
index f6cfddb278c..cdf5cb2fe03 100644
--- a/arch/s390/include/asm/signal.h
+++ b/arch/s390/include/asm/signal.h
@@ -115,7 +115,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ     2048
 #define SIGSTKSZ        8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index f3861b09ebb..c9af0d19c7a 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -122,8 +122,10 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lp)
 #define __raw_write_can_lock(x) ((x)->lock == 0)
 
 extern void _raw_read_lock_wait(raw_rwlock_t *lp);
+extern void _raw_read_lock_wait_flags(raw_rwlock_t *lp, unsigned long flags);
 extern int _raw_read_trylock_retry(raw_rwlock_t *lp);
 extern void _raw_write_lock_wait(raw_rwlock_t *lp);
+extern void _raw_write_lock_wait_flags(raw_rwlock_t *lp, unsigned long flags);
 extern int _raw_write_trylock_retry(raw_rwlock_t *lp);
 
 static inline void __raw_read_lock(raw_rwlock_t *rw)
@@ -134,6 +136,14 @@ static inline void __raw_read_lock(raw_rwlock_t *rw)
 		_raw_read_lock_wait(rw);
 }
 
+static inline void __raw_read_lock_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	unsigned int old;
+	old = rw->lock & 0x7fffffffU;
+	if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old)
+		_raw_read_lock_wait_flags(rw, flags);
+}
+
 static inline void __raw_read_unlock(raw_rwlock_t *rw)
 {
 	unsigned int old, cmp;
@@ -151,6 +161,12 @@ static inline void __raw_write_lock(raw_rwlock_t *rw)
 		_raw_write_lock_wait(rw);
 }
 
+static inline void __raw_write_lock_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0))
+		_raw_write_lock_wait_flags(rw, flags);
+}
+
 static inline void __raw_write_unlock(raw_rwlock_t *rw)
 {
 	_raw_compare_and_swap(&rw->lock, 0x80000000, 0);
@@ -172,9 +188,6 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 	return _raw_write_trylock_retry(rw);
 }
 
-#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
-#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
-
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h
index 1f34580e67a..dc75c616eaf 100644
--- a/arch/s390/include/asm/suspend.h
+++ b/arch/s390/include/asm/suspend.h
@@ -1,5 +1,10 @@
 #ifndef __ASM_S390_SUSPEND_H
 #define __ASM_S390_SUSPEND_H
 
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
 #endif
 
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index 2429b87eb28..e0a73d3eb83 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -12,6 +12,7 @@
 #ifndef _ASM_SYSCALL_H
 #define _ASM_SYSCALL_H	1
 
+#include <linux/sched.h>
 #include <asm/ptrace.h>
 
 static inline long syscall_get_nr(struct task_struct *task,
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 3a8b26eb1f2..4fb83c1cdb7 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -1,11 +1,7 @@
 /*
- *  include/asm-s390/system.h
+ * Copyright IBM Corp. 1999, 2009
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- *  Derived from "include/asm-i386/system.h"
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __ASM_SYSTEM_H
@@ -469,6 +465,20 @@ extern psw_t sysc_restore_trace_psw;
 extern psw_t io_restore_trace_psw;
 #endif
 
+static inline int tprot(unsigned long addr)
+{
+	int rc = -EFAULT;
+
+	asm volatile(
+		"	tprot	0(%1),0\n"
+		"0:	ipm	%0\n"
+		"	srl	%0,28\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "a" (addr) : "cc");
+	return rc;
+}
+
 #endif /* __KERNEL__ */
 
 #endif
diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h
index 67f66278f53..bc3a35cefc9 100644
--- a/arch/s390/include/asm/termios.h
+++ b/arch/s390/include/asm/termios.h
@@ -60,7 +60,7 @@ struct termio {
 #define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
 #define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 461f2abd2e6..925bcc64903 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -83,14 +83,16 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags bit numbers
  */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
 #define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTART_SVC		4	/* restart svc with new svc number */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
 #define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
 #define TIF_MCCK_PENDING	7	/* machine check handling is pending */
+#define TIF_SYSCALL_TRACE	8	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	9	/* syscall auditing active */
+#define TIF_SECCOMP		10	/* secure computing */
+#define TIF_SYSCALL_FTRACE	11	/* ftrace syscall instrumentation */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
 					   TIF_NEED_RESCHED */
@@ -99,15 +101,17 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
 #define TIF_FREEZE		21	/* thread is freezing for suspend */
 
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
 #define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_FTRACE	(1<<TIF_SYSCALL_FTRACE)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h
index 3dc3fc22881..04d6b95a89c 100644
--- a/arch/s390/include/asm/types.h
+++ b/arch/s390/include/asm/types.h
@@ -28,12 +28,6 @@ typedef __signed__ long saddr_t;
  */
 #ifdef __KERNEL__
 
-#ifndef __s390x__
-#define BITS_PER_LONG 32
-#else
-#define BITS_PER_LONG 64
-#endif
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma64_addr_t;
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 0235970278f..8377e91533d 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -131,7 +131,7 @@ static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
 
 #define put_user(x, ptr)					\
 ({								\
-	might_sleep();						\
+	might_fault();						\
 	__put_user(x, ptr);					\
 })
 
@@ -180,7 +180,7 @@ extern int __put_user_bad(void) __attribute__((noreturn));
 
 #define get_user(x, ptr)					\
 ({								\
-	might_sleep();						\
+	might_fault();						\
 	__get_user(x, ptr);					\
 })
 
@@ -231,7 +231,7 @@ __copy_to_user(void __user *to, const void *from, unsigned long n)
 static inline unsigned long __must_check
 copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = __copy_to_user(to, from, n);
 	return n;
@@ -282,7 +282,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
 	else
@@ -299,7 +299,7 @@ __copy_in_user(void __user *to, const void __user *from, unsigned long n)
 static inline unsigned long __must_check
 copy_in_user(void __user *to, const void __user *from, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (__access_ok(from,n) && __access_ok(to,n))
 		n = __copy_in_user(to, from, n);
 	return n;
@@ -312,7 +312,7 @@ static inline long __must_check
 strncpy_from_user(char *dst, const char __user *src, long count)
 {
         long res = -EFAULT;
-        might_sleep();
+	might_fault();
         if (access_ok(VERIFY_READ, src, 1))
 		res = uaccess.strncpy_from_user(count, src, dst);
         return res;
@@ -321,7 +321,7 @@ strncpy_from_user(char *dst, const char __user *src, long count)
 static inline unsigned long
 strnlen_user(const char __user * src, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	return uaccess.strnlen_user(n, src);
 }
 
@@ -354,7 +354,7 @@ __clear_user(void __user *to, unsigned long n)
 static inline unsigned long __must_check
 clear_user(void __user *to, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = uaccess.clear_user(n, to);
 	return n;
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index f0f19e6ace6..c80602d7c88 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -267,7 +267,9 @@
 #define __NR_epoll_create1	327
 #define	__NR_preadv		328
 #define	__NR_pwritev		329
-#define NR_syscalls 330
+#define __NR_rt_tgsigqueueinfo	330
+#define __NR_perf_counter_open	331
+#define NR_syscalls 332
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 228e3105ded..c75ed43b1a1 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -3,8 +3,9 @@
 #
 
 ifdef CONFIG_FUNCTION_TRACER
-# Do not trace early boot code
+# Don't trace early setup code and tracing code
 CFLAGS_REMOVE_early.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
 #
@@ -22,7 +23,7 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o setup.o \
 	    processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
-	    vdso.o vtime.o sysinfo.o nmi.o
+	    vdso.o vtime.o sysinfo.o nmi.o sclp.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
@@ -41,6 +42,8 @@ obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 
 # Kexec part
 S390_KEXEC_OBJS := machine_kexec.o crash.o
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index fb38af6316b..88a83366819 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1823,3 +1823,20 @@ compat_sys_pwritev_wrapper:
 	llgfr	%r5,%r5			# u32
 	llgfr	%r6,%r6			# u32
 	jg	compat_sys_pwritev	# branch to system call
+
+	.globl	compat_sys_rt_tgsigqueueinfo_wrapper
+compat_sys_rt_tgsigqueueinfo_wrapper:
+	lgfr	%r2,%r2			# compat_pid_t
+	lgfr	%r3,%r3			# compat_pid_t
+	lgfr	%r4,%r4			# int
+	llgtr	%r5,%r5			# struct compat_siginfo *
+	jg	compat_sys_rt_tgsigqueueinfo_wrapper # branch to system call
+
+	.globl	sys_perf_counter_open_wrapper
+sys_perf_counter_open_wrapper:
+	llgtr	%r2,%r2			# const struct perf_counter_attr *
+	lgfr	%r3,%r3			# pid_t
+	lgfr	%r4,%r4			# int
+	lgfr	%r5,%r5			# int
+	llgfr	%r6,%r6			# unsigned long
+	jg	sys_perf_counter_open	# branch to system call
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index cf09948faad..f9b144049dc 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -1,7 +1,7 @@
 /*
  *  arch/s390/kernel/early.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Hongjie Yang <hongjie@us.ibm.com>,
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
+#include <linux/ftrace.h>
 #include <linux/lockdep.h>
 #include <linux/module.h>
 #include <linux/pfn.h>
@@ -209,7 +210,7 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= MACHINE_FLAG_VM;
 }
 
-static __init void early_pgm_check_handler(void)
+static void early_pgm_check_handler(void)
 {
 	unsigned long addr;
 	const struct exception_table_entry *fixup;
@@ -221,7 +222,7 @@ static __init void early_pgm_check_handler(void)
 	S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 }
 
-static noinline __init void setup_lowcore_early(void)
+void setup_lowcore_early(void)
 {
 	psw_t psw;
 
@@ -410,5 +411,8 @@ void __init startup_init(void)
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
 	S390_lowcore.machine_flags = machine_flags;
+#ifdef CONFIG_DYNAMIC_FTRACE
+	S390_lowcore.ftrace_func = (unsigned long)ftrace_caller;
+#endif
 	lockdep_on();
 }
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index f3e27593421..c4c80a22bc1 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -53,6 +53,8 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
+_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
+		_TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
 
 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
 STACK_SIZE  = 1 << STACK_SHIFT
@@ -265,7 +267,7 @@ sysc_do_restart:
 	sth	%r7,SP_SVCNR(%r15)
 	sll	%r7,2		  # svc number *4
 	l	%r8,BASED(.Lsysc_table)
-	tm	__TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+2(%r9),_TIF_SYSCALL
 	l	%r8,0(%r7,%r8)	  # get system call addr.
 	bnz	BASED(sysc_tracesys)
 	basr	%r14,%r8	  # call sys_xxxx
@@ -405,7 +407,7 @@ sysc_tracego:
 	basr	%r14,%r8		# call sys_xxx
 	st	%r2,SP_R2(%r15)		# store return value
 sysc_tracenogo:
-	tm	__TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+2(%r9),_TIF_SYSCALL
 	bz	BASED(sysc_return)
 	l	%r1,BASED(.Ltrace_exit)
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
@@ -1107,6 +1109,7 @@ cleanup_io_leave_insn:
 
 		.section .rodata, "a"
 #define SYSCALL(esa,esame,emu)	.long esa
+	.globl	sys_call_table
 sys_call_table:
 #include "syscalls.S"
 #undef SYSCALL
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 84a105838e0..f6618e9e15e 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -56,6 +56,8 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
+_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
+		_TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
 
 #define BASED(name) name-system_call(%r13)
 
@@ -260,7 +262,7 @@ sysc_do_restart:
 	larl	%r10,sys_call_table_emu  # use 31 bit emulation system calls
 sysc_noemu:
 #endif
-	tm	__TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+6(%r9),_TIF_SYSCALL
 	lgf	%r8,0(%r7,%r10) # load address of system call routine
 	jnz	sysc_tracesys
 	basr	%r14,%r8	# call sys_xxxx
@@ -391,7 +393,7 @@ sysc_tracego:
 	basr	%r14,%r8		# call sys_xxx
 	stg	%r2,SP_R2(%r15)		# store return value
 sysc_tracenogo:
-	tm	__TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+6(%r9),_TIF_SYSCALL
 	jz	sysc_return
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	larl	%r14,sysc_return	# return point is sysc_return
@@ -1058,6 +1060,7 @@ cleanup_io_leave_insn:
 
 		.section .rodata, "a"
 #define SYSCALL(esa,esame,emu)	.long esame
+	.globl	sys_call_table
 sys_call_table:
 #include "syscalls.S"
 #undef SYSCALL
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
new file mode 100644
index 00000000000..82ddfd3a75a
--- /dev/null
+++ b/arch/s390/kernel/ftrace.c
@@ -0,0 +1,260 @@
+/*
+ * Dynamic function tracer architecture backend.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <linux/hardirq.h>
+#include <linux/uaccess.h>
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <trace/syscall.h>
+#include <asm/lowcore.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+void ftrace_disable_code(void);
+void ftrace_disable_return(void);
+void ftrace_call_code(void);
+void ftrace_nop_code(void);
+
+#define FTRACE_INSN_SIZE 4
+
+#ifdef CONFIG_64BIT
+
+asm(
+	"	.align	4\n"
+	"ftrace_disable_code:\n"
+	"	j	0f\n"
+	"	.word	0x0024\n"
+	"	lg	%r1,"__stringify(__LC_FTRACE_FUNC)"\n"
+	"	basr	%r14,%r1\n"
+	"ftrace_disable_return:\n"
+	"	lg	%r14,8(15)\n"
+	"	lgr	%r0,%r0\n"
+	"0:\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_nop_code:\n"
+	"	j	.+"__stringify(MCOUNT_INSN_SIZE)"\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_call_code:\n"
+	"	stg	%r14,8(%r15)\n");
+
+#else /* CONFIG_64BIT */
+
+asm(
+	"	.align	4\n"
+	"ftrace_disable_code:\n"
+	"	j	0f\n"
+	"	l	%r1,"__stringify(__LC_FTRACE_FUNC)"\n"
+	"	basr	%r14,%r1\n"
+	"ftrace_disable_return:\n"
+	"	l	%r14,4(%r15)\n"
+	"	j	0f\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"0:\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_nop_code:\n"
+	"	j	.+"__stringify(MCOUNT_INSN_SIZE)"\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_call_code:\n"
+	"	st	%r14,4(%r15)\n");
+
+#endif /* CONFIG_64BIT */
+
+static int ftrace_modify_code(unsigned long ip,
+			      void *old_code, int old_size,
+			      void *new_code, int new_size)
+{
+	unsigned char replaced[MCOUNT_INSN_SIZE];
+
+	/*
+	 * Note: Due to modules code can disappear and change.
+	 *  We need to protect against faulting as well as code
+	 *  changing. We do this by using the probe_kernel_*
+	 *  functions.
+	 *  This however is just a simple sanity check.
+	 */
+	if (probe_kernel_read(replaced, (void *)ip, old_size))
+		return -EFAULT;
+	if (memcmp(replaced, old_code, old_size) != 0)
+		return -EINVAL;
+	if (probe_kernel_write((void *)ip, new_code, new_size))
+		return -EPERM;
+	return 0;
+}
+
+static int ftrace_make_initial_nop(struct module *mod, struct dyn_ftrace *rec,
+				   unsigned long addr)
+{
+	return ftrace_modify_code(rec->ip,
+				  ftrace_call_code, FTRACE_INSN_SIZE,
+				  ftrace_disable_code, MCOUNT_INSN_SIZE);
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+		    unsigned long addr)
+{
+	if (addr == MCOUNT_ADDR)
+		return ftrace_make_initial_nop(mod, rec, addr);
+	return ftrace_modify_code(rec->ip,
+				  ftrace_call_code, FTRACE_INSN_SIZE,
+				  ftrace_nop_code, FTRACE_INSN_SIZE);
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	return ftrace_modify_code(rec->ip,
+				  ftrace_nop_code, FTRACE_INSN_SIZE,
+				  ftrace_call_code, FTRACE_INSN_SIZE);
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	ftrace_dyn_func = (unsigned long)func;
+	return 0;
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	*(unsigned long *)data = 0;
+	return 0;
+}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+/*
+ * Patch the kernel code at ftrace_graph_caller location:
+ * The instruction there is branch relative on condition. The condition mask
+ * is either all ones (always branch aka disable ftrace_graph_caller) or all
+ * zeroes (nop aka enable ftrace_graph_caller).
+ * Instruction format for brc is a7m4xxxx where m is the condition mask.
+ */
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned short opcode = 0xa704;
+
+	return probe_kernel_write(ftrace_graph_caller, &opcode, sizeof(opcode));
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned short opcode = 0xa7f4;
+
+	return probe_kernel_write(ftrace_graph_caller, &opcode, sizeof(opcode));
+}
+
+static inline unsigned long ftrace_mcount_call_adjust(unsigned long addr)
+{
+	return addr - (ftrace_disable_return - ftrace_disable_code);
+}
+
+#else /* CONFIG_DYNAMIC_FTRACE */
+
+static inline unsigned long ftrace_mcount_call_adjust(unsigned long addr)
+{
+	return addr - MCOUNT_OFFSET_RET;
+}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addresses
+ * in current thread info.
+ */
+unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
+{
+	struct ftrace_graph_ent trace;
+
+	/* Nmi's are currently unsupported. */
+	if (unlikely(in_nmi()))
+		goto out;
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		goto out;
+	if (ftrace_push_return_trace(parent, ip, &trace.depth) == -EBUSY)
+		goto out;
+	trace.func = ftrace_mcount_call_adjust(ip) & PSW_ADDR_INSN;
+	/* Only trace if the calling function expects to. */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		goto out;
+	}
+	parent = (unsigned long)return_to_handler;
+out:
+	return parent;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+extern unsigned long __start_syscalls_metadata[];
+extern unsigned long __stop_syscalls_metadata[];
+extern unsigned int sys_call_table[];
+
+static struct syscall_metadata **syscalls_metadata;
+
+struct syscall_metadata *syscall_nr_to_meta(int nr)
+{
+	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
+		return NULL;
+
+	return syscalls_metadata[nr];
+}
+
+static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
+{
+	struct syscall_metadata *start;
+	struct syscall_metadata *stop;
+	char str[KSYM_SYMBOL_LEN];
+
+	start = (struct syscall_metadata *)__start_syscalls_metadata;
+	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
+	kallsyms_lookup(syscall, NULL, NULL, NULL, str);
+
+	for ( ; start < stop; start++) {
+		if (start->name && !strcmp(start->name + 3, str + 3))
+			return start;
+	}
+	return NULL;
+}
+
+void arch_init_ftrace_syscalls(void)
+{
+	struct syscall_metadata *meta;
+	int i;
+	static atomic_t refs;
+
+	if (atomic_inc_return(&refs) != 1)
+		goto out;
+	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
+				    GFP_KERNEL);
+	if (!syscalls_metadata)
+		goto out;
+	for (i = 0; i < NR_syscalls; i++) {
+		meta = find_syscall_meta((unsigned long)sys_call_table[i]);
+		syscalls_metadata[i] = meta;
+	}
+	return;
+out:
+	atomic_dec(&refs);
+}
+#endif
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 22596d70fc2..ec688234852 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -1,7 +1,5 @@
 /*
- *  arch/s390/kernel/head.S
- *
- * Copyright (C) IBM Corp. 1999,2006
+ * Copyright IBM Corp. 1999,2009
  *
  *    Author(s): Hartmut Penner <hp@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -64,7 +62,7 @@ __HEAD
 	.org   0x100
 #
 # subroutine for loading from tape
-# Paramters:
+# Parameters:
 #  R1 = device number
 #  R2 = load address
 .Lloader:
@@ -479,27 +477,58 @@ startup:basr	%r13,0			# get base
 	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
 	mvc	__LC_EXIT_TIMER(8),5f-.LPG0(%r13)
 #ifndef CONFIG_MARCH_G5
-	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
-	stidp	__LC_CPUID		# store cpuid
-	lhi	%r0,(3f-2f) / 2
-	la	%r1,2f-.LPG0(%r13)
-0:	clc	__LC_CPUID+4(2),0(%r1)
-	jne	3f
-	lpsw	1f-.LPG0(13)		# machine type not good enough, crash
+	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
+	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
+	stfl	__LC_STFL_FAC_LIST	# store facility list
+	tm	__LC_STFL_FAC_LIST,0x01	# stfle available ?
+	jz	0f
+	la	%r0,0
+	.insn	s,0xb2b00000,__LC_STFL_FAC_LIST	# store facility list extended
+0:	l	%r0,__LC_STFL_FAC_LIST
+	n	%r0,2f+8-.LPG0(%r13)
+	cl	%r0,2f+8-.LPG0(%r13)
+	jne	1f
+	l	%r0,__LC_STFL_FAC_LIST+4
+	n	%r0,2f+12-.LPG0(%r13)
+	cl	%r0,2f+12-.LPG0(%r13)
+	je	3f
+1:	l	%r15,.Lstack-.LPG0(%r13)
+	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
+	ahi	%r15,-96
+	la	%r2,.Lals_string-.LPG0(%r13)
+	l	%r3,.Lsclp_print-.LPG0(%r13)
+	basr	%r14,%r3
+	lpsw	2f-.LPG0(%r13)		# machine type not good enough, crash
+.Lals_string:
+	.asciz	"The Linux kernel requires more recent processor hardware"
+.Lsclp_print:
+	.long	_sclp_print_early
+.Lstack:
+	.long	init_thread_union
 	.align 16
-1:	.long	0x000a0000,0x00000000
-2:
+2:	.long	0x000a0000,0x8badcccc
+#if defined(CONFIG_64BIT)
 #if defined(CONFIG_MARCH_Z10)
-	.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086, 0x2094, 0x2096
+	.long 0xc100efe3, 0xf0680000
 #elif defined(CONFIG_MARCH_Z9_109)
-	.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086
+	.long 0xc100efc3, 0x00000000
 #elif defined(CONFIG_MARCH_Z990)
-	.short 0x9672, 0x2064, 0x2066
+	.long 0xc0002000, 0x00000000
 #elif defined(CONFIG_MARCH_Z900)
-	.short 0x9672
+	.long 0xc0000000, 0x00000000
+#endif
+#else
+#if defined(CONFIG_MARCH_Z10)
+	.long 0x8100c880, 0x00000000
+#elif defined(CONFIG_MARCH_Z9_109)
+	.long 0x8100c880, 0x00000000
+#elif defined(CONFIG_MARCH_Z990)
+	.long 0x80002000, 0x00000000
+#elif defined(CONFIG_MARCH_Z900)
+	.long 0x80000000, 0x00000000
+#endif
 #endif
-3:	la	%r1,2(%r1)
-	brct	%r0,0b
+3:
 #endif
 
 	l	%r13,4f-.LPG0(%r13)
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index a01cf0284db..9bb2f6241d9 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -25,9 +25,9 @@
 #include <linux/preempt.h>
 #include <linux/stop_machine.h>
 #include <linux/kdebug.h>
+#include <linux/uaccess.h>
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
-#include <asm/uaccess.h>
 #include <linux/module.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
@@ -155,35 +155,8 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn)
 static int __kprobes swap_instruction(void *aref)
 {
 	struct ins_replace_args *args = aref;
-	u32 *addr;
-	u32 instr;
-	int err = -EFAULT;
 
-	/*
-	 * Text segment is read-only, hence we use stura to bypass dynamic
-	 * address translation to exchange the instruction. Since stura
-	 * always operates on four bytes, but we only want to exchange two
-	 * bytes do some calculations to get things right. In addition we
-	 * shall not cross any page boundaries (vmalloc area!) when writing
-	 * the new instruction.
-	 */
-	addr = (u32 *)((unsigned long)args->ptr & -4UL);
-	if ((unsigned long)args->ptr & 2)
-		instr = ((*addr) & 0xffff0000) | args->new;
-	else
-		instr = ((*addr) & 0x0000ffff) | args->new << 16;
-
-	asm volatile(
-		"	lra	%1,0(%1)\n"
-		"0:	stura	%2,%1\n"
-		"1:	la	%0,0\n"
-		"2:\n"
-		EX_TABLE(0b,2b)
-		: "+d" (err)
-		: "a" (addr), "d" (instr)
-		: "memory", "cc");
-
-	return err;
+	return probe_kernel_write(args->ptr, &args->new, sizeof(args->new));
 }
 
 void __kprobes arch_arm_kprobe(struct kprobe *p)
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 80641224a09..2a0a5e97ba8 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -1,5 +1,5 @@
 /*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
  *
@@ -7,36 +7,64 @@
 
 #include <asm/asm-offsets.h>
 
-#ifndef CONFIG_64BIT
-.globl _mcount
+	.globl ftrace_stub
+ftrace_stub:
+	br	%r14
+
+#ifdef CONFIG_64BIT
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	.globl _mcount
 _mcount:
-	stm	%r0,%r5,8(%r15)
-	st	%r14,56(%r15)
-	lr	%r1,%r15
-	ahi	%r15,-96
-	l	%r3,100(%r15)
-	la	%r2,0(%r14)
-	st	%r1,__SF_BACKCHAIN(%r15)
-	la	%r3,0(%r3)
-	bras	%r14,0f
-	.long	ftrace_trace_function
-0:	l	%r14,0(%r14)
-	l	%r14,0(%r14)
-	basr	%r14,%r14
-	ahi	%r15,96
-	lm	%r0,%r5,8(%r15)
-	l	%r14,56(%r15)
 	br	%r14
 
-.globl ftrace_stub
-ftrace_stub:
+	.globl ftrace_caller
+ftrace_caller:
+	larl	%r1,function_trace_stop
+	icm	%r1,0xf,0(%r1)
+	bnzr	%r14
+	stmg	%r2,%r5,32(%r15)
+	stg	%r14,112(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	lgr	%r2,%r14
+	lg	%r3,168(%r15)
+	larl	%r14,ftrace_dyn_func
+	lg	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	# This unconditional branch gets runtime patched. Change only if
+	# you know what you are doing. See ftrace_enable_graph_caller().
+	j	0f
+	lg	%r2,272(%r15)
+	lg	%r3,168(%r15)
+	brasl	%r14,prepare_ftrace_return
+	stg	%r2,168(%r15)
+0:
+#endif
+	aghi	%r15,160
+	lmg	%r2,%r5,32(%r15)
+	lg	%r14,112(%r15)
 	br	%r14
 
-#else /* CONFIG_64BIT */
+	.data
+	.globl	ftrace_dyn_func
+ftrace_dyn_func:
+	.quad	ftrace_stub
+	.previous
+
+#else /* CONFIG_DYNAMIC_FTRACE */
 
-.globl _mcount
+	.globl _mcount
 _mcount:
-	stmg	%r0,%r5,16(%r15)
+	larl	%r1,function_trace_stop
+	icm	%r1,0xf,0(%r1)
+	bnzr	%r14
+	stmg	%r2,%r5,32(%r15)
 	stg	%r14,112(%r15)
 	lgr	%r1,%r15
 	aghi	%r15,-160
@@ -46,13 +74,143 @@ _mcount:
 	larl	%r14,ftrace_trace_function
 	lg	%r14,0(%r14)
 	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	lg	%r2,272(%r15)
+	lg	%r3,168(%r15)
+	brasl	%r14,prepare_ftrace_return
+	stg	%r2,168(%r15)
+#endif
 	aghi	%r15,160
-	lmg	%r0,%r5,16(%r15)
+	lmg	%r2,%r5,32(%r15)
 	lg	%r14,112(%r15)
 	br	%r14
 
-.globl ftrace_stub
-ftrace_stub:
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+	.globl	return_to_handler
+return_to_handler:
+	stmg	%r2,%r5,32(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	brasl	%r14,ftrace_return_to_handler
+	aghi	%r15,160
+	lgr	%r14,%r2
+	lmg	%r2,%r5,32(%r15)
+	br	%r14
+
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#else /* CONFIG_64BIT */
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	.globl _mcount
+_mcount:
+	br	%r14
+
+	.globl ftrace_caller
+ftrace_caller:
+	stm	%r2,%r5,16(%r15)
+	bras	%r1,2f
+0:	.long	ftrace_trace_function
+1:	.long	function_trace_stop
+2:	l	%r2,1b-0b(%r1)
+	icm	%r2,0xf,0(%r2)
+	jnz	3f
+	st	%r14,56(%r15)
+	lr	%r0,%r15
+	ahi	%r15,-96
+	l	%r3,100(%r15)
+	la	%r2,0(%r14)
+	st	%r0,__SF_BACKCHAIN(%r15)
+	la	%r3,0(%r3)
+	l	%r14,0b-0b(%r1)
+	l	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	# This unconditional branch gets runtime patched. Change only if
+	# you know what you are doing. See ftrace_enable_graph_caller().
+	j	1f
+	bras	%r1,0f
+	.long	prepare_ftrace_return
+0:	l	%r2,152(%r15)
+	l	%r4,0(%r1)
+	l	%r3,100(%r15)
+	basr	%r14,%r4
+	st	%r2,100(%r15)
+1:
+#endif
+	ahi	%r15,96
+	l	%r14,56(%r15)
+3:	lm	%r2,%r5,16(%r15)
 	br	%r14
 
+	.data
+	.globl	ftrace_dyn_func
+ftrace_dyn_func:
+	.long	ftrace_stub
+	.previous
+
+#else /* CONFIG_DYNAMIC_FTRACE */
+
+	.globl _mcount
+_mcount:
+	stm	%r2,%r5,16(%r15)
+	bras	%r1,2f
+0:	.long	ftrace_trace_function
+1:	.long	function_trace_stop
+2:	l	%r2,1b-0b(%r1)
+	icm	%r2,0xf,0(%r2)
+	jnz	3f
+	st	%r14,56(%r15)
+	lr	%r0,%r15
+	ahi	%r15,-96
+	l	%r3,100(%r15)
+	la	%r2,0(%r14)
+	st	%r0,__SF_BACKCHAIN(%r15)
+	la	%r3,0(%r3)
+	l	%r14,0b-0b(%r1)
+	l	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	bras	%r1,0f
+	.long	prepare_ftrace_return
+0:	l	%r2,152(%r15)
+	l	%r4,0(%r1)
+	l	%r3,100(%r15)
+	basr	%r14,%r4
+	st	%r2,100(%r15)
+#endif
+	ahi	%r15,96
+	l	%r14,56(%r15)
+3:	lm	%r2,%r5,16(%r15)
+	br	%r14
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+	.globl	return_to_handler
+return_to_handler:
+	stm	%r2,%r5,16(%r15)
+	st	%r14,56(%r15)
+	lr	%r0,%r15
+	ahi	%r15,-96
+	st	%r0,__SF_BACKCHAIN(%r15)
+	bras	%r1,0f
+	.long	ftrace_return_to_handler
+0:	l	%r2,0b-0b(%r1)
+	basr	%r14,%r2
+	lr	%r14,%r2
+	ahi	%r15,96
+	lm	%r2,%r5,16(%r15)
+	br	%r14
+
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 9872999c66d..559af0d0787 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -1,6 +1,7 @@
 /*
- *    Copyright IBM Corp. 2008
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Copyright IBM Corp. 2008, 2009
+ *
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
 #include <linux/kernel.h>
@@ -9,20 +10,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static inline int tprot(unsigned long addr)
-{
-	int rc = -EFAULT;
-
-	asm volatile(
-		"	tprot	0(%1),0\n"
-		"0:	ipm	%0\n"
-		"	srl	%0,28\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc) : "a" (addr) : "cc");
-	return rc;
-}
-
 #define ADDR2G (1ULL << 31)
 
 static void find_memory_chunks(struct mem_chunk chunk[])
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index eed4a00cb67..ab2e3ed28ab 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -56,8 +56,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 static void
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 28cf196ba77..015e27da40e 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -16,7 +16,7 @@
 #include <asm/lowcore.h>
 #include <asm/smp.h>
 #include <asm/etr.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/nmi.h>
 #include <asm/crw.h>
 
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index a3acd8e60af..355f7a30c3f 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -32,6 +32,7 @@
 #include <linux/elfcore.h>
 #include <linux/kernel_stat.h>
 #include <linux/syscalls.h>
+#include <asm/compat.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -204,7 +205,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	save_fp_regs(&p->thread.fp_regs);
 	/* Set a new TLS ?  */
 	if (clone_flags & CLONE_SETTLS) {
-		if (test_thread_flag(TIF_31BIT)) {
+		if (is_compat_task()) {
 			p->thread.acrs[0] = (unsigned int) regs->gprs[6];
 		} else {
 			p->thread.acrs[0] = (unsigned int)(regs->gprs[6] >> 32);
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 75c496f4f16..490b39934d6 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -36,7 +36,9 @@
 #include <linux/elf.h>
 #include <linux/regset.h>
 #include <linux/tracehook.h>
-
+#include <linux/seccomp.h>
+#include <trace/syscall.h>
+#include <asm/compat.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -69,7 +71,7 @@ FixPerRegisters(struct task_struct *task)
 	if (per_info->single_step) {
 		per_info->control_regs.bits.starting_addr = 0;
 #ifdef CONFIG_COMPAT
-		if (test_thread_flag(TIF_31BIT))
+		if (is_compat_task())
 			per_info->control_regs.bits.ending_addr = 0x7fffffffUL;
 		else
 #endif
@@ -482,8 +484,7 @@ static int peek_user_compat(struct task_struct *child,
 {
 	__u32 tmp;
 
-	if (!test_thread_flag(TIF_31BIT) ||
-	    (addr & 3) || addr > sizeof(struct user) - 3)
+	if (!is_compat_task() || (addr & 3) || addr > sizeof(struct user) - 3)
 		return -EIO;
 
 	tmp = __peek_user_compat(child, addr);
@@ -584,8 +585,7 @@ static int __poke_user_compat(struct task_struct *child,
 static int poke_user_compat(struct task_struct *child,
 			    addr_t addr, addr_t data)
 {
-	if (!test_thread_flag(TIF_31BIT) ||
-	    (addr & 3) || addr > sizeof(struct user32) - 3)
+	if (!is_compat_task() || (addr & 3) || addr > sizeof(struct user32) - 3)
 		return -EIO;
 
 	return __poke_user_compat(child, addr, data);
@@ -642,6 +642,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
 	long ret;
 
+	/* Do the secure computing check first. */
+	secure_computing(regs->gprs[2]);
+
 	/*
 	 * The sysc_tracesys code in entry.S stored the system
 	 * call number to gprs[2].
@@ -659,8 +662,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		ret = -1;
 	}
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+		ftrace_syscall_enter(regs);
+
 	if (unlikely(current->audit_context))
-		audit_syscall_entry(test_thread_flag(TIF_31BIT) ?
+		audit_syscall_entry(is_compat_task() ?
 					AUDIT_ARCH_S390 : AUDIT_ARCH_S390X,
 				    regs->gprs[2], regs->orig_gpr2,
 				    regs->gprs[3], regs->gprs[4],
@@ -674,6 +680,9 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]),
 				   regs->gprs[2]);
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+		ftrace_syscall_exit(regs);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
 }
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index a0d2d55d7fb..0de305b598c 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -10,10 +10,11 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/ftrace.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/lowcore.h>
 #include <asm/s390_ext.h>
 #include <asm/irq_regs.h>
@@ -112,7 +113,7 @@ int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
 	return 0;
 }
 
-void do_extint(struct pt_regs *regs, unsigned short code)
+void __irq_entry do_extint(struct pt_regs *regs, unsigned short code)
 {
         ext_int_info_t *p;
         int index;
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
new file mode 100644
index 00000000000..20639dfe0c4
--- /dev/null
+++ b/arch/s390/kernel/sclp.S
@@ -0,0 +1,327 @@
+/*
+ * Mini SCLP driver.
+ *
+ * Copyright IBM Corp. 2004,2009
+ *
+ *   Author(s):	Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>,
+ *		Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+LC_EXT_NEW_PSW		= 0x58			# addr of ext int handler
+LC_EXT_INT_PARAM	= 0x80			# addr of ext int parameter
+LC_EXT_INT_CODE		= 0x86			# addr of ext int code
+
+#
+# Subroutine which waits synchronously until either an external interruption
+# or a timeout occurs.
+#
+# Parameters:
+#   R2	= 0 for no timeout, non-zero for timeout in (approximated) seconds
+#
+# Returns:
+#   R2	= 0 on interrupt, 2 on timeout
+#   R3	= external interruption parameter if R2=0
+#
+
+.section ".init.text","ax"
+
+_sclp_wait_int:
+	stm	%r6,%r15,24(%r15)		# save registers
+	basr	%r13,0				# get base register
+.LbaseS1:
+	ahi	%r15,-96			# create stack frame
+	la	%r8,LC_EXT_NEW_PSW		# register int handler
+	mvc	.LoldpswS1-.LbaseS1(8,%r13),0(%r8)
+	mvc	0(8,%r8),.LextpswS1-.LbaseS1(%r13)
+	lhi	%r6,0x0200			# cr mask for ext int (cr0.54)
+	ltr	%r2,%r2
+	jz	.LsetctS1
+	ahi	%r6,0x0800			# cr mask for clock int (cr0.52)
+	stck	.LtimeS1-.LbaseS1(%r13)		# initiate timeout
+	al	%r2,.LtimeS1-.LbaseS1(%r13)
+	st	%r2,.LtimeS1-.LbaseS1(%r13)
+	sckc	.LtimeS1-.LbaseS1(%r13)
+
+.LsetctS1:
+	stctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)	# enable required interrupts
+	l	%r0,.LctlS1-.LbaseS1(%r13)
+	lhi	%r1,~(0x200 | 0x800)		# clear old values
+	nr	%r1,%r0
+	or	%r1,%r6				# set new value
+	st	%r1,.LctlS1-.LbaseS1(%r13)
+	lctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)
+	st	%r0,.LctlS1-.LbaseS1(%r13)
+	lhi	%r2,2				# return code for timeout
+.LloopS1:
+	lpsw	.LwaitpswS1-.LbaseS1(%r13)	# wait until interrupt
+.LwaitS1:
+	lh	%r7,LC_EXT_INT_CODE
+	chi	%r7,0x1004			# timeout?
+	je	.LtimeoutS1
+	chi	%r7,0x2401			# service int?
+	jne	.LloopS1
+	sr	%r2,%r2
+	l	%r3,LC_EXT_INT_PARAM
+.LtimeoutS1:
+	lctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)	# restore interrupt setting
+	# restore old handler
+	mvc	0(8,%r8),.LoldpswS1-.LbaseS1(%r13)
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14				# return to caller
+
+	.align	8
+.LoldpswS1:
+	.long	0, 0				# old ext int PSW
+.LextpswS1:
+	.long	0x00080000, 0x80000000+.LwaitS1	# PSW to handle ext int
+.LwaitpswS1:
+	.long	0x010a0000, 0x00000000+.LloopS1	# PSW to wait for ext int
+.LtimeS1:
+	.quad	0				# current time
+.LctlS1:
+	.long	0				# CT0 contents
+
+#
+# Subroutine to synchronously issue a service call.
+#
+# Parameters:
+#   R2	= command word
+#   R3	= sccb address
+#
+# Returns:
+#   R2	= 0 on success, 1 on failure
+#   R3	= sccb response code if R2 = 0
+#
+
+_sclp_servc:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	lr	%r6,%r2				# save command word
+	lr	%r7,%r3				# save sccb address
+.LretryS2:
+	lhi	%r2,1				# error return code
+	.insn	rre,0xb2200000,%r6,%r7		# servc
+	brc	1,.LendS2			# exit if not operational
+	brc	8,.LnotbusyS2			# go on if not busy
+	sr	%r2,%r2				# wait until no longer busy
+	bras	%r14,_sclp_wait_int
+	j	.LretryS2			# retry
+.LnotbusyS2:
+	sr	%r2,%r2				# wait until result
+	bras	%r14,_sclp_wait_int
+	sr	%r2,%r2
+	lh	%r3,6(%r7)
+.LendS2:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+
+#
+# Subroutine to set up the SCLP interface.
+#
+# Parameters:
+#   R2	= 0 to activate, non-zero to deactivate
+#
+# Returns:
+#   R2	= 0 on success, non-zero on failure
+#
+
+_sclp_setup:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	basr	%r13,0				# get base register
+.LbaseS3:
+	l	%r6,.LsccbS0-.LbaseS3(%r13)	# prepare init mask sccb
+	mvc	0(.LinitendS3-.LinitsccbS3,%r6),.LinitsccbS3-.LbaseS3(%r13)
+	ltr	%r2,%r2				# initialization?
+	jz	.LdoinitS3			# go ahead
+	# clear masks
+	xc	.LinitmaskS3-.LinitsccbS3(8,%r6),.LinitmaskS3-.LinitsccbS3(%r6)
+.LdoinitS3:
+	l	%r2,.LwritemaskS3-.LbaseS3(%r13)# get command word
+	lr	%r3,%r6				# get sccb address
+	bras	%r14,_sclp_servc		# issue service call
+	ltr	%r2,%r2				# servc successful?
+	jnz	.LerrorS3
+	chi	%r3,0x20			# write mask successful?
+	jne	.LerrorS3
+	# check masks
+	la	%r2,.LinitmaskS3-.LinitsccbS3(%r6)
+	l	%r1,0(%r2)			# receive mask ok?
+	n	%r1,12(%r2)
+	cl	%r1,0(%r2)
+	jne	.LerrorS3
+	l	%r1,4(%r2)			# send mask ok?
+	n	%r1,8(%r2)
+	cl	%r1,4(%r2)
+	sr	%r2,%r2
+	je	.LendS3
+.LerrorS3:
+	lhi	%r2,1				# error return code
+.LendS3:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+.LwritemaskS3:
+	.long	0x00780005			# SCLP command for write mask
+.LinitsccbS3:
+	.word	.LinitendS3-.LinitsccbS3
+	.byte	0,0,0,0
+	.word	0
+	.word	0
+	.word	4
+.LinitmaskS3:
+	.long	0x80000000
+	.long	0x40000000
+	.long	0
+	.long	0
+.LinitendS3:
+
+#
+# Subroutine which prints a given text to the SCLP console.
+#
+# Parameters:
+#   R2	= address of nil-terminated ASCII text
+#
+# Returns:
+#   R2	= 0 on success, 1 on failure
+#
+
+_sclp_print:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	basr	%r13,0				# get base register
+.LbaseS4:
+	l	%r8,.LsccbS0-.LbaseS4(%r13)	# prepare write data sccb
+	mvc	0(.LmtoS4-.LwritesccbS4,%r8),.LwritesccbS4-.LbaseS4(%r13)
+	la	%r7,.LmtoS4-.LwritesccbS4(%r8)	# current mto addr
+	sr	%r0,%r0
+	l	%r10,.Lascebc-.LbaseS4(%r13)	# address of translation table
+.LinitmtoS4:
+	# initialize mto
+	mvc	0(.LmtoendS4-.LmtoS4,%r7),.LmtoS4-.LbaseS4(%r13)
+	lhi	%r6,.LmtoendS4-.LmtoS4		# current mto length
+.LloopS4:
+	ic	%r0,0(%r2)			# get character
+	ahi	%r2,1
+	ltr	%r0,%r0				# end of string?
+	jz	.LfinalizemtoS4
+	chi	%r0,0x15			# end of line (NL)?
+	jz	.LfinalizemtoS4
+	stc	%r0,0(%r6,%r7)			# copy to mto
+	la	%r11,0(%r6,%r7)
+	tr	0(1,%r11),0(%r10)		# translate to EBCDIC
+	ahi	%r6,1
+	j	.LloopS4
+.LfinalizemtoS4:
+	sth	%r6,0(%r7)			# update mto length
+	lh	%r9,.LmdbS4-.LwritesccbS4(%r8)	# update mdb length
+	ar	%r9,%r6
+	sth	%r9,.LmdbS4-.LwritesccbS4(%r8)
+	lh	%r9,.LevbufS4-.LwritesccbS4(%r8)# update evbuf length
+	ar	%r9,%r6
+	sth	%r9,.LevbufS4-.LwritesccbS4(%r8)
+	lh	%r9,0(%r8)			# update sccb length
+	ar	%r9,%r6
+	sth	%r9,0(%r8)
+	ar	%r7,%r6				# update current mto adress
+	ltr	%r0,%r0				# more characters?
+	jnz	.LinitmtoS4
+	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
+	lr	%r3,%r8
+	bras	%r14,_sclp_servc
+	ltr	%r2,%r2				# servc successful?
+	jnz	.LendS4
+	chi	%r3,0x20			# write data successful?
+	je	.LendS4
+	lhi	%r2,1				# error return code
+.LendS4:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+
+#
+# Function which prints a given text to the SCLP console.
+#
+# Parameters:
+#   R2	= address of nil-terminated ASCII text
+#
+# Returns:
+#   R2	= 0 on success, 1 on failure
+#
+
+	.globl _sclp_print_early
+_sclp_print_early:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	lr	%r10,%r2			# save string pointer
+	lhi	%r2,0
+	bras	%r14,_sclp_setup		# enable console
+	ltr	%r2,%r2
+	jnz	.LendS5
+	lr	%r2,%r10
+	bras	%r14,_sclp_print		# print string
+	ltr	%r2,%r2
+	jnz	.LendS5
+	lhi	%r2,1
+	bras	%r14,_sclp_setup		# disable console
+.LendS5:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+
+.LwritedataS4:
+	.long	0x00760005			# SCLP command for write data
+.LwritesccbS4:
+	# sccb
+	.word	.LmtoS4-.LwritesccbS4
+	.byte	0
+	.byte	0,0,0
+	.word	0
+
+	# evbuf
+.LevbufS4:
+	.word	.LmtoS4-.LevbufS4
+	.byte	0x02
+	.byte	0
+	.word	0
+
+.LmdbS4:
+	# mdb
+	.word	.LmtoS4-.LmdbS4
+	.word	1
+	.long	0xd4c4c240
+	.long	1
+
+	# go
+.LgoS4:
+	.word	.LmtoS4-.LgoS4
+	.word	1
+	.long	0
+	.byte	0,0,0,0,0,0,0,0
+	.byte	0,0,0
+	.byte	0
+	.byte	0,0,0,0,0,0,0
+	.byte	0
+	.word	0
+	.byte	0,0,0,0,0,0,0,0,0,0
+	.byte	0,0,0,0,0,0,0,0
+	.byte	0,0,0,0,0,0,0,0
+
+.LmtoS4:
+	.word	.LmtoendS4-.LmtoS4
+	.word	4
+	.word	0x1000
+	.byte	0
+	.byte	0,0,0
+.LmtoendS4:
+
+	# Global constants
+.LsccbS0:
+	.long	_sclp_work_area
+.Lascebc:
+	.long	_ascebc
+.previous
+
+.section ".init.data","a"
+	.balign 4096
+_sclp_work_area:
+	.fill	4096
+.previous
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 7402b6a39ea..9717717c6fe 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -42,6 +42,7 @@
 #include <linux/ctype.h>
 #include <linux/reboot.h>
 #include <linux/topology.h>
+#include <linux/ftrace.h>
 
 #include <asm/ipl.h>
 #include <asm/uaccess.h>
@@ -442,6 +443,7 @@ setup_lowcore(void)
 	lc->steal_timer = S390_lowcore.steal_timer;
 	lc->last_update_timer = S390_lowcore.last_update_timer;
 	lc->last_update_clock = S390_lowcore.last_update_clock;
+	lc->ftrace_func = S390_lowcore.ftrace_func;
 	set_prefix((u32)(unsigned long) lc);
 	lowcore_ptr[0] = lc;
 }
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 3cf74c3ccb6..062bd64e65f 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -26,6 +26,7 @@
 #include <linux/binfmts.h>
 #include <linux/tracehook.h>
 #include <linux/syscalls.h>
+#include <linux/compat.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
@@ -482,7 +483,7 @@ void do_signal(struct pt_regs *regs)
 		/* Whee!  Actually deliver the signal.  */
 		int ret;
 #ifdef CONFIG_COMPAT
-		if (test_thread_flag(TIF_31BIT)) {
+		if (is_compat_task()) {
 			ret = handle_signal32(signr, &ka, &info, oldset, regs);
 	        }
 		else
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index a985a3ba440..fd8e3111a4e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1,7 +1,7 @@
 /*
  *  arch/s390/kernel/smp.c
  *
- *    Copyright IBM Corp. 1999,2007
+ *    Copyright IBM Corp. 1999, 2009
  *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
  *		 Martin Schwidefsky (schwidefsky@de.ibm.com)
  *		 Heiko Carstens (heiko.carstens@de.ibm.com)
@@ -47,7 +47,7 @@
 #include <asm/timer.h>
 #include <asm/lowcore.h>
 #include <asm/sclp.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/vdso.h>
 #include "entry.h"
 
@@ -572,6 +572,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
 	cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
+	cpu_lowcore->ftrace_func = S390_lowcore.ftrace_func;
 	eieio();
 
 	while (signal_processor(cpu, sigp_restart) == sigp_busy)
@@ -1030,6 +1031,42 @@ out:
 static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show,
 			 dispatching_store);
 
+/*
+ * If the resume kernel runs on another cpu than the suspended kernel,
+ * we have to switch the cpu IDs in the logical map.
+ */
+void smp_switch_boot_cpu_in_resume(u32 resume_phys_cpu_id,
+				   struct _lowcore *suspend_lowcore)
+{
+	int cpu, suspend_cpu_id, resume_cpu_id;
+	u32 suspend_phys_cpu_id;
+
+	suspend_phys_cpu_id = __cpu_logical_map[suspend_lowcore->cpu_nr];
+	suspend_cpu_id = suspend_lowcore->cpu_nr;
+
+	for_each_present_cpu(cpu) {
+		if (__cpu_logical_map[cpu] == resume_phys_cpu_id) {
+			resume_cpu_id = cpu;
+			goto found;
+		}
+	}
+	panic("Could not find resume cpu in logical map.\n");
+
+found:
+	printk("Resume  cpu ID: %i/%i\n", resume_phys_cpu_id, resume_cpu_id);
+	printk("Suspend cpu ID: %i/%i\n", suspend_phys_cpu_id, suspend_cpu_id);
+
+	__cpu_logical_map[resume_cpu_id] = suspend_phys_cpu_id;
+	__cpu_logical_map[suspend_cpu_id] = resume_phys_cpu_id;
+
+	lowcore_ptr[suspend_cpu_id]->cpu_addr = resume_phys_cpu_id;
+}
+
+u32 smp_get_phys_cpu_id(void)
+{
+	return __cpu_logical_map[smp_processor_id()];
+}
+
 static int __init topology_init(void)
 {
 	int cpu;
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 2c7739fe70b..ad1acd20038 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -338,3 +338,5 @@ SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
 SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
 SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
 SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
+SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
+SYSCALL(sys_perf_counter_open,sys_perf_counter_open,sys_perf_counter_open_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ef596d02057..215330a2c12 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -70,7 +70,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
 {
 	return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
 }
@@ -95,12 +95,6 @@ void tod_to_timeval(__u64 todval, struct timespec *xtime)
 	xtime->tv_nsec = ((todval * 1000) >> 12);
 }
 
-#ifdef CONFIG_PROFILING
-#define s390_do_profile()	profile_tick(CPU_PROFILING)
-#else
-#define s390_do_profile()	do { ; } while(0)
-#endif /* CONFIG_PROFILING */
-
 void clock_comparator_work(void)
 {
 	struct clock_event_device *cd;
@@ -109,7 +103,6 @@ void clock_comparator_work(void)
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	cd = &__get_cpu_var(comparators);
 	cd->event_handler(cd);
-	s390_do_profile();
 }
 
 /*
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 89b2e7f1b7a..45e1708b70f 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-
+#include <linux/compat.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/processor.h>
@@ -53,8 +53,19 @@ unsigned int __read_mostly vdso_enabled = 1;
 
 static int __init vdso_setup(char *s)
 {
-	vdso_enabled = simple_strtoul(s, NULL, 0);
-	return 1;
+	unsigned long val;
+	int rc;
+
+	rc = 0;
+	if (strncmp(s, "on", 3) == 0)
+		vdso_enabled = 1;
+	else if (strncmp(s, "off", 4) == 0)
+		vdso_enabled = 0;
+	else {
+		rc = strict_strtoul(s, 0, &val);
+		vdso_enabled = rc ? 0 : !!val;
+	}
+	return !rc;
 }
 __setup("vdso=", vdso_setup);
 
@@ -203,7 +214,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	vdso_pagelist = vdso64_pagelist;
 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (test_thread_flag(TIF_31BIT)) {
+	if (is_compat_task()) {
 		vdso_pagelist = vdso32_pagelist;
 		vdso_pages = vdso32_pages;
 	}
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 89399b8756c..a53db23ee09 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -34,6 +34,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0x0700
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index c87f59bd824..c8eb7255332 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -23,7 +23,7 @@
 #include <asm/s390_ext.h>
 #include <asm/timer.h>
 #include <asm/irq_regs.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 
 static ext_int_info_t ext_int_info_timer;
 
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 10bccd1f8ae..c18b21d6991 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -512,7 +512,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		BUG();
 	}
 
-	might_sleep();
+	might_fault();
 
 	do {
 		__vcpu_run(vcpu);
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index e41f4008afc..f7e0d30250b 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -124,6 +124,27 @@ void _raw_read_lock_wait(raw_rwlock_t *rw)
 }
 EXPORT_SYMBOL(_raw_read_lock_wait);
 
+void _raw_read_lock_wait_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	unsigned int old;
+	int count = spin_retry;
+
+	local_irq_restore(flags);
+	while (1) {
+		if (count-- <= 0) {
+			_raw_yield();
+			count = spin_retry;
+		}
+		if (!__raw_read_can_lock(rw))
+			continue;
+		old = rw->lock & 0x7fffffffU;
+		local_irq_disable();
+		if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old)
+			return;
+	}
+}
+EXPORT_SYMBOL(_raw_read_lock_wait_flags);
+
 int _raw_read_trylock_retry(raw_rwlock_t *rw)
 {
 	unsigned int old;
@@ -157,6 +178,25 @@ void _raw_write_lock_wait(raw_rwlock_t *rw)
 }
 EXPORT_SYMBOL(_raw_write_lock_wait);
 
+void _raw_write_lock_wait_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	int count = spin_retry;
+
+	local_irq_restore(flags);
+	while (1) {
+		if (count-- <= 0) {
+			_raw_yield();
+			count = spin_retry;
+		}
+		if (!__raw_write_can_lock(rw))
+			continue;
+		local_irq_disable();
+		if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)
+			return;
+	}
+}
+EXPORT_SYMBOL(_raw_write_lock_wait_flags);
+
 int _raw_write_trylock_retry(raw_rwlock_t *rw)
 {
 	int count = spin_retry;
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index 2a745813454..db05661ac89 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux s390-specific parts of the memory manager.
 #
 
-obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o
+obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
 obj-$(CONFIG_CMM) += cmm.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 obj-$(CONFIG_PAGE_STATES) += page-states.o
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 833e8366c35..220a152c836 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
+#include <linux/compat.h>
 #include <linux/smp.h>
 #include <linux/kdebug.h>
 #include <linux/smp_lock.h>
@@ -239,7 +240,7 @@ static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
 	up_read(&mm->mmap_sem);
 	clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
 #ifdef CONFIG_COMPAT
-	compat = test_tsk_thread_flag(current, TIF_31BIT);
+	compat = is_compat_task();
 	if (compat && instruction == 0x0a77)
 		sys32_sigreturn();
 	else if (compat && instruction == 0x0aad)
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
new file mode 100644
index 00000000000..81756271dc4
--- /dev/null
+++ b/arch/s390/mm/maccess.c
@@ -0,0 +1,61 @@
+/*
+ * Access kernel memory without faulting -- s390 specific implementation.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+
+/*
+ * This function writes to kernel memory bypassing DAT and possible
+ * write protection. It copies one to four bytes from src to dst
+ * using the stura instruction.
+ * Returns the number of bytes copied or -EFAULT.
+ */
+static long probe_kernel_write_odd(void *dst, void *src, size_t size)
+{
+	unsigned long count, aligned;
+	int offset, mask;
+	int rc = -EFAULT;
+
+	aligned = (unsigned long) dst & ~3UL;
+	offset = (unsigned long) dst & 3;
+	count = min_t(unsigned long, 4 - offset, size);
+	mask = (0xf << (4 - count)) & 0xf;
+	mask >>= offset;
+	asm volatile(
+		"	bras	1,0f\n"
+		"	icm	0,0,0(%3)\n"
+		"0:	l	0,0(%1)\n"
+		"	lra	%1,0(%1)\n"
+		"1:	ex	%2,0(1)\n"
+		"2:	stura	0,%1\n"
+		"	la	%0,0\n"
+		"3:\n"
+		EX_TABLE(0b,3b) EX_TABLE(1b,3b) EX_TABLE(2b,3b)
+		: "+d" (rc), "+a" (aligned)
+		: "a" (mask), "a" (src) : "cc", "memory", "0", "1");
+	return rc ? rc : count;
+}
+
+long probe_kernel_write(void *dst, void *src, size_t size)
+{
+	long copied = 0;
+
+	while (size) {
+		copied = probe_kernel_write_odd(dst, src, size);
+		if (copied < 0)
+			break;
+		dst += copied;
+		src += copied;
+		size -= copied;
+	}
+	return copied < 0 ? -EFAULT : 0;
+}
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index e008d236cc1..f4558ccf02b 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <asm/pgalloc.h>
+#include <asm/compat.h>
 
 /*
  * Top of mmap area (just below the process stack).
@@ -55,7 +56,7 @@ static inline int mmap_is_legacy(void)
 	/*
 	 * Force standard allocation for 64 bit programs.
 	 */
-	if (!test_thread_flag(TIF_31BIT))
+	if (!is_compat_task())
 		return 1;
 #endif
 	return sysctl_legacy_va_layout ||
@@ -91,7 +92,7 @@ EXPORT_SYMBOL_GPL(arch_pick_mmap_layout);
 
 int s390_mmap_check(unsigned long addr, unsigned long len)
 {
-	if (!test_thread_flag(TIF_31BIT) &&
+	if (!is_compat_task() &&
 	    len >= TASK_SIZE && TASK_SIZE < (1UL << 53))
 		return crst_table_upgrade(current->mm, 1UL << 53);
 	return 0;
@@ -108,8 +109,7 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr,
 	area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
 	if (!(area & ~PAGE_MASK))
 		return area;
-	if (area == -ENOMEM &&
-	    !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < (1UL << 53)) {
 		/* Upgrade the page table to 4 levels and retry. */
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
@@ -131,8 +131,7 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
 	area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
 	if (!(area & ~PAGE_MASK))
 		return area;
-	if (area == -ENOMEM &&
-	    !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < (1UL << 53)) {
 		/* Upgrade the page table to 4 levels and retry. */
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index be6c1cf4ad5..56566720798 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -1,7 +1,5 @@
 /*
- *  arch/s390/mm/pgtable.c
- *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007,2009
  *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
@@ -53,6 +51,18 @@ void clear_table_pgstes(unsigned long *table)
 
 #endif
 
+unsigned long VMALLOC_START = VMALLOC_END - VMALLOC_SIZE;
+EXPORT_SYMBOL(VMALLOC_START);
+
+static int __init parse_vmalloc(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+	VMALLOC_START = (VMALLOC_END - memparse(arg, &arg)) & PAGE_MASK;
+	return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+
 unsigned long *crst_table_alloc(struct mm_struct *mm, int noexec)
 {
 	struct page *page = alloc_pages(GFP_KERNEL, ALLOC_ORDER);
@@ -303,3 +313,22 @@ int s390_enable_sie(void)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_enable_sie);
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+#ifdef CONFIG_HIBERNATION
+bool kernel_page_present(struct page *page)
+{
+	unsigned long addr;
+	int cc;
+
+	addr = page_to_phys(page);
+	asm("lra %1,0(%1)\n"
+	    "ipm %0\n"
+	    "srl %0,28"
+	    :"=d"(cc),"+a"(addr)::"cc");
+	return cc == 0;
+}
+
+#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_DEBUG_PAGEALLOC */
+
diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
new file mode 100644
index 00000000000..973bb45a8fe
--- /dev/null
+++ b/arch/s390/power/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for s390 PM support
+#
+
+obj-$(CONFIG_HIBERNATION) += suspend.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o
+obj-$(CONFIG_HIBERNATION) += swsusp_64.o
+obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/suspend.c b/arch/s390/power/suspend.c
new file mode 100644
index 00000000000..b3351eceebb
--- /dev/null
+++ b/arch/s390/power/suspend.c
@@ -0,0 +1,40 @@
+/*
+ * Suspend support specific for s390.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+#include <linux/pfn.h>
+#include <asm/sections.h>
+#include <asm/ipl.h>
+
+/*
+ * References to section boundaries
+ */
+extern const void __nosave_begin, __nosave_end;
+
+/*
+ *  check if given pfn is in the 'nosave' or in the read only NSS section
+ */
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
+					>> PAGE_SHIFT;
+	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+
+	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
+		return 1;
+	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
+		if (ipl_info.type == IPL_TYPE_NSS)
+			return 1;
+	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+		return 1;
+	return 0;
+}
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
new file mode 100644
index 00000000000..e6a4fe9f5f2
--- /dev/null
+++ b/arch/s390/power/swsusp.c
@@ -0,0 +1,30 @@
+/*
+ * Support for suspend and resume on s390
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *
+ */
+
+
+/*
+ * save CPU registers before creating a hibernation image and before
+ * restoring the memory state from it
+ */
+void save_processor_state(void)
+{
+	/* implentation contained in the
+	 * swsusp_arch_suspend function
+	 */
+}
+
+/*
+ * restore the contents of CPU registers
+ */
+void restore_processor_state(void)
+{
+	/* implentation contained in the
+	 * swsusp_arch_resume function
+	 */
+}
diff --git a/arch/s390/power/swsusp_64.c b/arch/s390/power/swsusp_64.c
new file mode 100644
index 00000000000..9516a517d72
--- /dev/null
+++ b/arch/s390/power/swsusp_64.c
@@ -0,0 +1,17 @@
+/*
+ * Support for suspend and resume on s390
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *
+ */
+
+#include <asm/system.h>
+#include <linux/interrupt.h>
+
+void do_after_copyback(void)
+{
+	mb();
+}
+
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
new file mode 100644
index 00000000000..3c74e7d827c
--- /dev/null
+++ b/arch/s390/power/swsusp_asm64.S
@@ -0,0 +1,199 @@
+/*
+ * S390 64-bit swsusp implementation
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save register context in absolute 0 lowcore and call swsusp_save() to
+ * create in-memory kernel image. The context is saved in the designated
+ * "store status" memory locations (see POP).
+ * We return from this function twice. The first time during the suspend to
+ * disk process. The second time via the swsusp_arch_resume() function
+ * (see below) in the resume process.
+ * This function runs with disabled interrupts.
+ */
+	.section .text
+	.align	2
+	.globl swsusp_arch_suspend
+swsusp_arch_suspend:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Switch off lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	ni	__SF_EMPTY+4(%r15),0xef
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Store prefix register on stack */
+	stpx	__SF_EMPTY(%r15)
+
+	/* Setup base register for lowcore (absolute 0) */
+	llgf	%r1,__SF_EMPTY(%r15)
+
+	/* Get pointer to save area */
+	aghi	%r1,0x1000
+
+	/* Store registers */
+	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
+	stfpc	0x31c(%r1)			/* store fpu control */
+	std	0,0x200(%r1)			/* store f0 */
+	std	1,0x208(%r1)			/* store f1 */
+	std	2,0x210(%r1)			/* store f2 */
+	std	3,0x218(%r1)			/* store f3 */
+	std	4,0x220(%r1)			/* store f4 */
+	std	5,0x228(%r1)			/* store f5 */
+	std	6,0x230(%r1)			/* store f6 */
+	std	7,0x238(%r1)			/* store f7 */
+	std	8,0x240(%r1)			/* store f8 */
+	std	9,0x248(%r1)			/* store f9 */
+	std	10,0x250(%r1)			/* store f10 */
+	std	11,0x258(%r1)			/* store f11 */
+	std	12,0x260(%r1)			/* store f12 */
+	std	13,0x268(%r1)			/* store f13 */
+	std	14,0x270(%r1)			/* store f14 */
+	std	15,0x278(%r1)			/* store f15 */
+	stam	%a0,%a15,0x340(%r1)		/* store access registers */
+	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
+	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
+
+	stpt	0x328(%r1)			/* store timer */
+	stckc	0x330(%r1)			/* store clock comparator */
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	/* Setup lowcore */
+	brasl	%r14,setup_lowcore_early
+
+	/* Save image */
+	brasl	%r14,swsusp_save
+
+	/* Switch on lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	oi	__SF_EMPTY+4(%r15),0x10
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Restore prefix register and return */
+	lghi	%r1,0x1000
+	spx	0x318(%r1)
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
+
+/*
+ * Restore saved memory image to correct place and restore register context.
+ * Then we return to the function that called swsusp_arch_suspend().
+ * swsusp_arch_resume() runs with disabled interrupts.
+ */
+	.globl swsusp_arch_resume
+swsusp_arch_resume:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+	/* Save boot cpu number */
+	brasl	%r14,smp_get_phys_cpu_id
+	lgr	%r10,%r2
+
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Switch off lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	ni	__SF_EMPTY+4(%r15),0xef
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	/* Restore saved image */
+	larl	%r1,restore_pblist
+	lg	%r1,0(%r1)
+	ltgr	%r1,%r1
+	jz	2f
+0:
+	lg	%r2,8(%r1)
+	lg	%r4,0(%r1)
+	lghi	%r3,PAGE_SIZE
+	lghi	%r5,PAGE_SIZE
+1:
+	mvcle	%r2,%r4,0
+	jo	1b
+	lg	%r1,16(%r1)
+	ltgr	%r1,%r1
+	jnz	0b
+2:
+	ptlb				/* flush tlb */
+
+	/* Restore registers */
+	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
+
+	spt	0x328(%r13)		/* reprogram timer */
+	//sckc	0x330(%r13)		/* set clock comparator */
+
+	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
+	lam	%a0,%a15,0x340(%r13)	/* load access registers */
+
+	lfpc	0x31c(%r13)		/* load fpu control */
+	ld	0,0x200(%r13)		/* load f0 */
+	ld	1,0x208(%r13)		/* load f1 */
+	ld	2,0x210(%r13)		/* load f2 */
+	ld	3,0x218(%r13)		/* load f3 */
+	ld	4,0x220(%r13)		/* load f4 */
+	ld	5,0x228(%r13)		/* load f5 */
+	ld	6,0x230(%r13)		/* load f6 */
+	ld	7,0x238(%r13)		/* load f7 */
+	ld	8,0x240(%r13)		/* load f8 */
+	ld	9,0x248(%r13)		/* load f9 */
+	ld	10,0x250(%r13)		/* load f10 */
+	ld	11,0x258(%r13)		/* load f11 */
+	ld	12,0x260(%r13)		/* load f12 */
+	ld	13,0x268(%r13)		/* load f13 */
+	ld	14,0x270(%r13)		/* load f14 */
+	ld	15,0x278(%r13)		/* load f15 */
+
+	/* Load old stack */
+	lg	%r15,0x2f8(%r13)
+
+	/* Pointer to save arae */
+	lghi	%r13,0x1000
+
+	/* Switch CPUs */
+	lgr	%r2,%r10		/* get cpu id */
+	llgf	%r3,0x318(%r13)
+	brasl	%r14,smp_switch_boot_cpu_in_resume
+
+	/* Restore prefix register */
+	spx	0x318(%r13)
+
+	/* Switch on lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	oi	__SF_EMPTY+4(%r15),0x10
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Return 0 */
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index 978b58efb1e..157c320272c 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -84,5 +84,5 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/sh/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
index 156eb0225cf..7d8b72c91a5 100644
--- a/arch/sh/include/asm/mman.h
+++ b/arch/sh/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_MMAN_H
 #define __ASM_SH_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 9c6d21ec024..49592c780a6 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -163,7 +163,7 @@ typedef struct page *pgtable_t;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 /* vDSO support */
 #ifdef CONFIG_VSYSCALL
diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h
index 5c5c1e85208..9cc5f014468 100644
--- a/arch/sh/include/asm/signal.h
+++ b/arch/sh/include/asm/signal.h
@@ -106,7 +106,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index c19b0f7d2cc..c2efdcde266 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -46,8 +46,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index cc12cd48bbc..3f8b6a92eab 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -37,6 +37,8 @@ config SPARC64
 	select HAVE_KPROBES
 	select HAVE_LMB
 	select HAVE_SYSCALL_WRAPPERS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select RTC_DRV_CMOS
 	select RTC_DRV_BQ4802
@@ -93,6 +95,9 @@ config AUDIT_ARCH
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
+config HAVE_DYNAMIC_PER_CPU_AREA
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index b5d63bd8716..0123a4c596c 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 02:03:07 2009
+# Linux kernel version: 2.6.30
+# Tue Jun 16 04:59:36 2009
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -19,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -82,7 +83,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -95,16 +95,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -202,6 +207,7 @@ CONFIG_NR_QUICK=1
 CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
@@ -321,6 +327,7 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +347,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -364,6 +375,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -399,6 +411,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -477,10 +490,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -499,6 +508,7 @@ CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -507,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -521,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -569,7 +579,6 @@ CONFIG_DM_ZERO=m
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,6 +644,7 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -1127,6 +1137,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
 CONFIG_SND_DRIVERS=y
@@ -1153,6 +1168,7 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1183,6 +1199,7 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1229,6 +1246,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
@@ -1246,9 +1264,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1462,6 +1485,7 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1636,25 +1660,28 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index bb91b1248cd..f0d343c3b95 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -161,5 +161,5 @@ static inline int __atomic24_sub(int i, atomic24_t *v)
 
 #endif /* !(__KERNEL__) */
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index a0a70649269..f2e48009989 100644
--- a/arch/sparc/include/asm/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -114,5 +114,5 @@ static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/arch/sparc/include/asm/bitsperlong.h b/arch/sparc/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..40dcaa3aaa5
--- /dev/null
+++ b/arch/sparc/include/asm/bitsperlong.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ALPHA_BITSPERLONG_H
+#define __ASM_ALPHA_BITSPERLONG_H
+
+#if defined(__sparc__) && defined(__arch64__)
+#define __BITS_PER_LONG 64
+#else
+#define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_ALPHA_BITSPERLONG_H */
+
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index a11b89ee9ef..926397d345f 100644
--- a/arch/sparc/include/asm/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -6,9 +6,6 @@
 #ifndef _SPARC64_CPUDATA_H
 #define _SPARC64_CPUDATA_H
 
-#include <asm/hypervisor.h>
-#include <asm/asi.h>
-
 #ifndef __ASSEMBLY__
 
 #include <linux/percpu.h>
@@ -38,202 +35,10 @@ DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
 #define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
 #define local_cpu_data()	__get_cpu_var(__cpu_data)
 
-/* Trap handling code needs to get at a few critical values upon
- * trap entry and to process TSB misses.  These cannot be in the
- * per_cpu() area as we really need to lock them into the TLB and
- * thus make them part of the main kernel image.  As a result we
- * try to make this as small as possible.
- *
- * This is padded out and aligned to 64-bytes to avoid false sharing
- * on SMP.
- */
-
-/* If you modify the size of this structure, please update
- * TRAP_BLOCK_SZ_SHIFT below.
- */
-struct thread_info;
-struct trap_per_cpu {
-/* D-cache line 1: Basic thread information, cpu and device mondo queues */
-	struct thread_info	*thread;
-	unsigned long		pgd_paddr;
-	unsigned long		cpu_mondo_pa;
-	unsigned long		dev_mondo_pa;
-
-/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
-	unsigned long		resum_mondo_pa;
-	unsigned long		resum_kernel_buf_pa;
-	unsigned long		nonresum_mondo_pa;
-	unsigned long		nonresum_kernel_buf_pa;
-
-/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
-	struct hv_fault_status	fault_info;
-
-/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
-	unsigned long		cpu_mondo_block_pa;
-	unsigned long		cpu_list_pa;
-	unsigned long		tsb_huge;
-	unsigned long		tsb_huge_temp;
-
-/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
-	unsigned long		irq_worklist_pa;
-	unsigned int		cpu_mondo_qmask;
-	unsigned int		dev_mondo_qmask;
-	unsigned int		resum_qmask;
-	unsigned int		nonresum_qmask;
-	void			*hdesc;
-} __attribute__((aligned(64)));
-extern struct trap_per_cpu trap_block[NR_CPUS];
-extern void init_cur_cpu_trap(struct thread_info *);
-extern void setup_tba(void);
-extern int ncpus_probed;
 extern const struct seq_operations cpuinfo_op;
 
-extern unsigned long real_hard_smp_processor_id(void);
-
-struct cpuid_patch_entry {
-	unsigned int	addr;
-	unsigned int	cheetah_safari[4];
-	unsigned int	cheetah_jbus[4];
-	unsigned int	starfire[4];
-	unsigned int	sun4v[4];
-};
-extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
-
-struct sun4v_1insn_patch_entry {
-	unsigned int	addr;
-	unsigned int	insn;
-};
-extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
-	__sun4v_1insn_patch_end;
-
-struct sun4v_2insn_patch_entry {
-	unsigned int	addr;
-	unsigned int	insns[2];
-};
-extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
-	__sun4v_2insn_patch_end;
-
 #endif /* !(__ASSEMBLY__) */
 
-#define TRAP_PER_CPU_THREAD		0x00
-#define TRAP_PER_CPU_PGD_PADDR		0x08
-#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
-#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
-#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
-#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
-#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
-#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
-#define TRAP_PER_CPU_FAULT_INFO		0x40
-#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
-#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
-#define TRAP_PER_CPU_TSB_HUGE		0xd0
-#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
-#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
-#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
-#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
-#define TRAP_PER_CPU_RESUM_QMASK	0xf0
-#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
-
-#define TRAP_BLOCK_SZ_SHIFT		8
-
-#include <asm/scratchpad.h>
-
-#define __GET_CPUID(REG)				\
-	/* Spitfire implementation (default). */	\
-661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	 and		REG, 0x1f, REG;			\
-	nop;						\
-	.section	.cpuid_patch, "ax";		\
-	/* Instruction location. */			\
-	.word		661b;				\
-	/* Cheetah Safari implementation. */		\
-	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	and		REG, 0x3ff, REG;		\
-	nop;						\
-	/* Cheetah JBUS implementation. */		\
-	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	and		REG, 0x1f, REG;			\
-	nop;						\
-	/* Starfire implementation. */			\
-	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
-	sllx		REG, 9, REG;			\
-	or		REG, 0xd0, REG;			\
-	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
-	/* sun4v implementation. */			\
-	mov		SCRATCHPAD_CPUID, REG;		\
-	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
-	nop;						\
-	nop;						\
-	.previous;
-
-#ifdef CONFIG_SMP
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	__GET_CPUID(TMP)			\
-	sethi	%hi(trap_block), DEST;		\
-	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
-	or	DEST, %lo(trap_block), DEST;	\
-	add	DEST, TMP, DEST;		\
-
-/* Clobbers TMP, current address space PGD phys address into DEST.  */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
-#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
-
-/* Clobbers TMP, loads DEST with current thread info pointer.  */
-#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* Given the current thread info pointer in THR, load the per-cpu
- * area base of the current processor into DEST.  REG1, REG2, and REG3 are
- * clobbered.
- *
- * You absolutely cannot use DEST as a temporary in this code.  The
- * reason is that traps can happen during execution, and return from
- * trap will load the fully resolved DEST per-cpu base.  This can corrupt
- * the calculations done by the macro mid-stream.
- */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
-	lduh	[THR + TI_CPU], REG1;			\
-	sethi	%hi(__per_cpu_shift), REG3;		\
-	sethi	%hi(__per_cpu_base), REG2;		\
-	ldx	[REG3 + %lo(__per_cpu_shift)], REG3;	\
-	ldx	[REG2 + %lo(__per_cpu_base)], REG2;	\
-	sllx	REG1, REG3, REG3;			\
-	add	REG3, REG2, DEST;
-
-#else
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	sethi	%hi(trap_block), DEST;		\
-	or	DEST, %lo(trap_block), DEST;	\
-
-/* Uniprocessor versions, we know the cpuid is zero.  */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
-#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
-
-#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
-
-#endif /* !(CONFIG_SMP) */
+#include <asm/trap_block.h>
 
 #endif /* _SPARC64_CPUDATA_H */
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 0f4150e2661..204e4bf6443 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -1,8 +1,166 @@
 #ifndef ___ASM_SPARC_DMA_MAPPING_H
 #define ___ASM_SPARC_DMA_MAPPING_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/dma-mapping_64.h>
-#else
-#include <asm/dma-mapping_32.h>
-#endif
+
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+struct dma_ops {
+	void *(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void (*free_coherent)(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+	dma_addr_t (*map_page)(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction direction);
+	void (*unmap_page)(struct device *dev, dma_addr_t dma_addr,
+			   size_t size,
+			   enum dma_data_direction direction);
+	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
+			 int nhwentries,
+			 enum dma_data_direction direction);
+	void (*sync_single_for_cpu)(struct device *dev,
+				    dma_addr_t dma_handle, size_t size,
+				    enum dma_data_direction direction);
+	void (*sync_single_for_device)(struct device *dev,
+				       dma_addr_t dma_handle, size_t size,
+				       enum dma_data_direction direction);
+	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
+				int nelems,
+				enum dma_data_direction direction);
+	void (*sync_sg_for_device)(struct device *dev,
+				   struct scatterlist *sg, int nents,
+				   enum dma_data_direction dir);
+};
+extern const struct dma_ops *dma_ops;
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
+				 (unsigned long)cpu_addr & ~PAGE_MASK, size,
+				 direction);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_ops->unmap_page(dev, dma_addr, size, direction);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_ops->map_page(dev, page, offset, size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_ops->unmap_page(dev, dma_address, size, direction);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction)
+{
+	dma_ops->unmap_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction direction)
+{
+	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction direction)
+{
+	if (dma_ops->sync_single_for_device)
+		dma_ops->sync_single_for_device(dev, dma_handle, size,
+						direction);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction direction)
+{
+	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction direction)
+{
+	if (dma_ops->sync_sg_for_device)
+		dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction dir)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, dir);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction dir)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, dir);
+}
+
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe
+	 */
+	return (1 << INTERNODE_CACHE_SHIFT);
+}
+
 #endif
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
deleted file mode 100644
index 8a57ea0573e..00000000000
--- a/arch/sparc/include/asm/dma-mapping_32.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _ASM_SPARC_DMA_MAPPING_H
-#define _ASM_SPARC_DMA_MAPPING_H
-
-#include <linux/types.h>
-
-struct device;
-struct scatterlist;
-struct page;
-
-#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
-
-extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-extern void dma_free_coherent(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-				 size_t size,
-				 enum dma_data_direction direction);
-extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-			     size_t size,
-			     enum dma_data_direction direction);
-extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-			   size_t size, enum dma_data_direction direction);
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg,
-		      int nents, enum dma_data_direction direction);
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-			 int nents, enum dma_data_direction direction);
-extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-				    size_t size,
-				    enum dma_data_direction direction);
-extern void dma_sync_single_for_device(struct device *dev,
-				       dma_addr_t dma_handle,
-				       size_t size,
-				       enum dma_data_direction direction);
-extern void dma_sync_single_range_for_cpu(struct device *dev,
-					  dma_addr_t dma_handle,
-					  unsigned long offset,
-					  size_t size,
-					  enum dma_data_direction direction);
-extern void dma_sync_single_range_for_device(struct device *dev,
-					     dma_addr_t dma_handle,
-					     unsigned long offset, size_t size,
-					     enum dma_data_direction direction);
-extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				int nelems, enum dma_data_direction direction);
-extern void dma_sync_sg_for_device(struct device *dev,
-				   struct scatterlist *sg, int nelems,
-				   enum dma_data_direction direction);
-extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
-extern int dma_get_cache_alignment(void);
-
-#define dma_alloc_noncoherent	dma_alloc_coherent
-#define dma_free_noncoherent	dma_free_coherent
-
-#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
deleted file mode 100644
index bfa64f9702d..00000000000
--- a/arch/sparc/include/asm/dma-mapping_64.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef _ASM_SPARC64_DMA_MAPPING_H
-#define _ASM_SPARC64_DMA_MAPPING_H
-
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
-
-#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
-
-struct dma_ops {
-	void *(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void (*free_coherent)(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-	dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
-				 size_t size,
-				 enum dma_data_direction direction);
-	void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
-			     size_t size,
-			     enum dma_data_direction direction);
-	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
-	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
-			 int nhwentries,
-			 enum dma_data_direction direction);
-	void (*sync_single_for_cpu)(struct device *dev,
-				    dma_addr_t dma_handle, size_t size,
-				    enum dma_data_direction direction);
-	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
-				int nelems,
-				enum dma_data_direction direction);
-};
-extern const struct dma_ops *dma_ops;
-
-extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_ops->map_single(dev, cpu_addr, size, direction);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_ops->unmap_single(dev, dma_addr, size, direction);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_ops->map_single(dev, page_address(page) + offset,
-				   size, direction);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_ops->unmap_single(dev, dma_address, size, direction);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_ops->map_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
-{
-	dma_ops->unmap_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction direction)
-{
-	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction direction)
-{
-	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return (dma_addr == DMA_ERROR_CODE);
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	/* no easy way to get cache size on all processors, so return
-	 * the maximum possible, to be safe */
-	return (1 << INTERNODE_CACHE_SHIFT);
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h)	(1)
-
-#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h
index a9ef172977d..4e2bc490d71 100644
--- a/arch/sparc/include/asm/errno.h
+++ b/arch/sparc/include/asm/errno.h
@@ -110,4 +110,6 @@
 #define	EOWNERDEAD	132	/* Owner died */
 #define	ENOTRECOVERABLE	133	/* State not recoverable */
 
+#define	ERFKILL		134	/* Operation not possible due to RF-kill */
+
 #endif
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
index d27716cd38c..b0f18e9893d 100644
--- a/arch/sparc/include/asm/ftrace.h
+++ b/arch/sparc/include/asm/ftrace.h
@@ -11,4 +11,15 @@ extern void _mcount(void);
 
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* reloction of mcount call site is the same as the address */
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif /*  CONFIG_DYNAMIC_FTRACE */
+
 #endif /* _ASM_SPARC64_FTRACE */
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
index 1acc7272e53..9faa046713f 100644
--- a/arch/sparc/include/asm/mdesc.h
+++ b/arch/sparc/include/asm/mdesc.h
@@ -71,7 +71,8 @@ struct mdesc_notifier_client {
 
 extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
 
-extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+extern void mdesc_fill_in_cpu_data(cpumask_t *mask);
+extern void mdesc_populate_present_mask(cpumask_t *mask);
 
 extern void sun4v_mdesc_init(void);
 
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
index fdfbbf0a473..988192e8e95 100644
--- a/arch/sparc/include/asm/mman.h
+++ b/arch/sparc/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __SPARC_MMAN_H__
 #define __SPARC_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 /* SunOS'ified... */
 
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index d1806edc095..f72080bdda9 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -152,6 +152,6 @@ extern unsigned long pfn_base;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index 4274ed13ddb..f0d09b40103 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -132,6 +132,6 @@ typedef struct page *pgtable_t;
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
index bee64593023..007aafb4ae9 100644
--- a/arch/sparc/include/asm/percpu_64.h
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -7,20 +7,16 @@ register unsigned long __local_per_cpu_offset asm("g5");
 
 #ifdef CONFIG_SMP
 
-extern void real_setup_per_cpu_areas(void);
+#include <asm/trap_block.h>
 
-extern unsigned long __per_cpu_base;
-extern unsigned long __per_cpu_shift;
 #define __per_cpu_offset(__cpu) \
-	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+	(trap_block[(__cpu)].__per_cpu_base)
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
 #define __my_cpu_offset __local_per_cpu_offset
 
 #else /* ! SMP */
 
-#define real_setup_per_cpu_areas()		do { } while (0)
-
 #endif	/* SMP */
 
 #include <asm-generic/percpu.h>
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 900d44714f8..be8d7aaeb60 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -86,6 +86,8 @@ extern int of_node_to_nid(struct device_node *dp);
 #endif
 
 extern void prom_build_devicetree(void);
+extern void of_populate_present_mask(void);
+extern void of_fill_in_cpu_data(void);
 
 /* Dummy ref counting routines - to be implemented later */
 static inline struct device_node *of_node_get(struct device_node *node)
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
index cba45206b7f..e49b828a247 100644
--- a/arch/sparc/include/asm/signal.h
+++ b/arch/sparc/include/asm/signal.h
@@ -176,7 +176,7 @@ struct sigstack {
 #define SA_STATIC_ALLOC         0x8000
 #endif
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 struct __new_sigaction {
 	__sighandler_t		sa_handler;
diff --git a/arch/sparc/include/asm/trap_block.h b/arch/sparc/include/asm/trap_block.h
new file mode 100644
index 00000000000..7e26b2db621
--- /dev/null
+++ b/arch/sparc/include/asm/trap_block.h
@@ -0,0 +1,207 @@
+#ifndef _SPARC_TRAP_BLOCK_H
+#define _SPARC_TRAP_BLOCK_H
+
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses.  These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image.  As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+	struct thread_info	*thread;
+	unsigned long		pgd_paddr;
+	unsigned long		cpu_mondo_pa;
+	unsigned long		dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+	unsigned long		resum_mondo_pa;
+	unsigned long		resum_kernel_buf_pa;
+	unsigned long		nonresum_mondo_pa;
+	unsigned long		nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+	struct hv_fault_status	fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
+	unsigned long		cpu_mondo_block_pa;
+	unsigned long		cpu_list_pa;
+	unsigned long		tsb_huge;
+	unsigned long		tsb_huge_temp;
+
+/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
+	unsigned long		irq_worklist_pa;
+	unsigned int		cpu_mondo_qmask;
+	unsigned int		dev_mondo_qmask;
+	unsigned int		resum_qmask;
+	unsigned int		nonresum_qmask;
+	unsigned long		__per_cpu_base;
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+extern int ncpus_probed;
+
+extern unsigned long real_hard_smp_processor_id(void);
+
+struct cpuid_patch_entry {
+	unsigned int	addr;
+	unsigned int	cheetah_safari[4];
+	unsigned int	cheetah_jbus[4];
+	unsigned int	starfire[4];
+	unsigned int	sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+	__sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+	__sun4v_2insn_patch_end;
+
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD		0x00
+#define TRAP_PER_CPU_PGD_PADDR		0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
+#define TRAP_PER_CPU_FAULT_INFO		0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
+#define TRAP_PER_CPU_TSB_HUGE		0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
+#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
+#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
+#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
+#define TRAP_PER_CPU_RESUM_QMASK	0xf0
+#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
+#define TRAP_PER_CPU_PER_CPU_BASE	0xf8
+
+#define TRAP_BLOCK_SZ_SHIFT		8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG)				\
+	/* Spitfire implementation (default). */	\
+661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	 and		REG, 0x1f, REG;			\
+	nop;						\
+	.section	.cpuid_patch, "ax";		\
+	/* Instruction location. */			\
+	.word		661b;				\
+	/* Cheetah Safari implementation. */		\
+	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x3ff, REG;		\
+	nop;						\
+	/* Cheetah JBUS implementation. */		\
+	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x1f, REG;			\
+	nop;						\
+	/* Starfire implementation. */			\
+	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
+	sllx		REG, 9, REG;			\
+	or		REG, 0xd0, REG;			\
+	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
+	/* sun4v implementation. */			\
+	mov		SCRATCHPAD_CPUID, REG;		\
+	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
+	nop;						\
+	nop;						\
+	.previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	__GET_CPUID(TMP)			\
+	sethi	%hi(trap_block), DEST;		\
+	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
+	or	DEST, %lo(trap_block), DEST;	\
+	add	DEST, TMP, DEST;		\
+
+/* Clobbers TMP, current address space PGD phys address into DEST.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer.  */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST.  REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code.  The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base.  This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
+	lduh	[THR + TI_CPU], REG1;			\
+	sethi	%hi(trap_block), REG2;			\
+	sllx	REG1, TRAP_BLOCK_SZ_SHIFT, REG1;	\
+	or	REG2, %lo(trap_block), REG2;		\
+	add	REG2, REG1, REG2;			\
+	ldx	[REG2 + TRAP_PER_CPU_PER_CPU_BASE], DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	sethi	%hi(trap_block), DEST;		\
+	or	DEST, %lo(trap_block), DEST;	\
+
+/* Uniprocessor versions, we know the cpuid is zero.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* _SPARC_TRAP_BLOCK_H */
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index 2237118825d..de671d73bae 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -21,8 +21,6 @@ typedef unsigned short umode_t;
 
 #ifdef __KERNEL__
 
-#define BITS_PER_LONG 64
-
 #ifndef __ASSEMBLY__
 
 /* Dma addresses come in generic and 64-bit flavours.  */
@@ -46,8 +44,6 @@ typedef unsigned short umode_t;
 
 #ifdef __KERNEL__
 
-#define BITS_PER_LONG 32
-
 #ifndef __ASSEMBLY__
 
 typedef u32 dma_addr_t;
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 47d5619d43f..8303ac48103 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -17,6 +17,9 @@
 
 #ifndef __ASSEMBLY__
 
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
 /* Sparc is not segmented, however we need to be able to fool access_ok()
  * when doing system calls from kernel mode legitimately.
  *
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index c64e767a3e4..a38c0323891 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -12,7 +12,7 @@
 #include <asm/asi.h>
 #include <asm/system.h>
 #include <asm/spitfire.h>
-#include <asm-generic/uaccess.h>
+#include <asm-generic/uaccess-unaligned.h>
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index b8eb71ef316..b2c406de7d4 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -394,8 +394,9 @@
 #define __NR_accept4		323
 #define __NR_preadv		324
 #define __NR_pwritev		325
+#define __NR_rt_tgsigqueueinfo	326
 
-#define NR_SYSCALLS		326
+#define NR_SYSCALLS		327
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 54742e58831..475ce4696ac 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -37,6 +37,7 @@ obj-y                   += una_asm_$(BITS).o
 obj-$(CONFIG_SPARC32)   += muldiv.o
 obj-y                   += prom_common.o
 obj-y                   += prom_$(BITS).o
+obj-y                   += of_device_common.o
 obj-y                   += of_device_$(BITS).o
 obj-$(CONFIG_SPARC64)   += prom_irqtrans.o
 
@@ -54,6 +55,7 @@ obj-$(CONFIG_SPARC64)   += sstate.o
 obj-$(CONFIG_SPARC64)   += mdesc.o
 obj-$(CONFIG_SPARC64)	+= pcr.o
 obj-$(CONFIG_SPARC64)	+= nmi.o
+obj-$(CONFIG_SPARC64_SMP) += cpumap.o
 
 # sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
 obj-$(CONFIG_SPARC32)     += devres.o
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
new file mode 100644
index 00000000000..7430ed080b2
--- /dev/null
+++ b/arch/sparc/kernel/cpumap.c
@@ -0,0 +1,431 @@
+/* cpumap.c: used for optimizing CPU assignment
+ *
+ * Copyright (C) 2009 Hong H. Pham <hong.pham@windriver.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/spinlock.h>
+#include <asm/cpudata.h>
+#include "cpumap.h"
+
+
+enum {
+	CPUINFO_LVL_ROOT = 0,
+	CPUINFO_LVL_NODE,
+	CPUINFO_LVL_CORE,
+	CPUINFO_LVL_PROC,
+	CPUINFO_LVL_MAX,
+};
+
+enum {
+	ROVER_NO_OP              = 0,
+	/* Increment rover every time level is visited */
+	ROVER_INC_ON_VISIT       = 1 << 0,
+	/* Increment parent's rover every time rover wraps around */
+	ROVER_INC_PARENT_ON_LOOP = 1 << 1,
+};
+
+struct cpuinfo_node {
+	int id;
+	int level;
+	int num_cpus;    /* Number of CPUs in this hierarchy */
+	int parent_index;
+	int child_start; /* Array index of the first child node */
+	int child_end;   /* Array index of the last child node */
+	int rover;       /* Child node iterator */
+};
+
+struct cpuinfo_level {
+	int start_index; /* Index of first node of a level in a cpuinfo tree */
+	int end_index;   /* Index of last node of a level in a cpuinfo tree */
+	int num_nodes;   /* Number of nodes in a level in a cpuinfo tree */
+};
+
+struct cpuinfo_tree {
+	int total_nodes;
+
+	/* Offsets into nodes[] for each level of the tree */
+	struct cpuinfo_level level[CPUINFO_LVL_MAX];
+	struct cpuinfo_node  nodes[0];
+};
+
+
+static struct cpuinfo_tree *cpuinfo_tree;
+
+static u16 cpu_distribution_map[NR_CPUS];
+static DEFINE_SPINLOCK(cpu_map_lock);
+
+
+/* Niagara optimized cpuinfo tree traversal. */
+static const int niagara_iterate_method[] = {
+	[CPUINFO_LVL_ROOT] = ROVER_NO_OP,
+
+	/* Strands (or virtual CPUs) within a core may not run concurrently
+	 * on the Niagara, as instruction pipeline(s) are shared.  Distribute
+	 * work to strands in different cores first for better concurrency.
+	 * Go to next NUMA node when all cores are used.
+	 */
+	[CPUINFO_LVL_NODE] = ROVER_INC_ON_VISIT|ROVER_INC_PARENT_ON_LOOP,
+
+	/* Strands are grouped together by proc_id in cpuinfo_sparc, i.e.
+	 * a proc_id represents an instruction pipeline.  Distribute work to
+	 * strands in different proc_id groups if the core has multiple
+	 * instruction pipelines (e.g. the Niagara 2/2+ has two).
+	 */
+	[CPUINFO_LVL_CORE] = ROVER_INC_ON_VISIT,
+
+	/* Pick the next strand in the proc_id group. */
+	[CPUINFO_LVL_PROC] = ROVER_INC_ON_VISIT,
+};
+
+/* Generic cpuinfo tree traversal.  Distribute work round robin across NUMA
+ * nodes.
+ */
+static const int generic_iterate_method[] = {
+	[CPUINFO_LVL_ROOT] = ROVER_INC_ON_VISIT,
+	[CPUINFO_LVL_NODE] = ROVER_NO_OP,
+	[CPUINFO_LVL_CORE] = ROVER_INC_PARENT_ON_LOOP,
+	[CPUINFO_LVL_PROC] = ROVER_INC_ON_VISIT|ROVER_INC_PARENT_ON_LOOP,
+};
+
+
+static int cpuinfo_id(int cpu, int level)
+{
+	int id;
+
+	switch (level) {
+	case CPUINFO_LVL_ROOT:
+		id = 0;
+		break;
+	case CPUINFO_LVL_NODE:
+		id = cpu_to_node(cpu);
+		break;
+	case CPUINFO_LVL_CORE:
+		id = cpu_data(cpu).core_id;
+		break;
+	case CPUINFO_LVL_PROC:
+		id = cpu_data(cpu).proc_id;
+		break;
+	default:
+		id = -EINVAL;
+	}
+	return id;
+}
+
+/*
+ * Enumerate the CPU information in __cpu_data to determine the start index,
+ * end index, and number of nodes for each level in the cpuinfo tree.  The
+ * total number of cpuinfo nodes required to build the tree is returned.
+ */
+static int enumerate_cpuinfo_nodes(struct cpuinfo_level *tree_level)
+{
+	int prev_id[CPUINFO_LVL_MAX];
+	int i, n, num_nodes;
+
+	for (i = CPUINFO_LVL_ROOT; i < CPUINFO_LVL_MAX; i++) {
+		struct cpuinfo_level *lv = &tree_level[i];
+
+		prev_id[i] = -1;
+		lv->start_index = lv->end_index = lv->num_nodes = 0;
+	}
+
+	num_nodes = 1; /* Include the root node */
+
+	for (i = 0; i < num_possible_cpus(); i++) {
+		if (!cpu_online(i))
+			continue;
+
+		n = cpuinfo_id(i, CPUINFO_LVL_NODE);
+		if (n > prev_id[CPUINFO_LVL_NODE]) {
+			tree_level[CPUINFO_LVL_NODE].num_nodes++;
+			prev_id[CPUINFO_LVL_NODE] = n;
+			num_nodes++;
+		}
+		n = cpuinfo_id(i, CPUINFO_LVL_CORE);
+		if (n > prev_id[CPUINFO_LVL_CORE]) {
+			tree_level[CPUINFO_LVL_CORE].num_nodes++;
+			prev_id[CPUINFO_LVL_CORE] = n;
+			num_nodes++;
+		}
+		n = cpuinfo_id(i, CPUINFO_LVL_PROC);
+		if (n > prev_id[CPUINFO_LVL_PROC]) {
+			tree_level[CPUINFO_LVL_PROC].num_nodes++;
+			prev_id[CPUINFO_LVL_PROC] = n;
+			num_nodes++;
+		}
+	}
+
+	tree_level[CPUINFO_LVL_ROOT].num_nodes = 1;
+
+	n = tree_level[CPUINFO_LVL_NODE].num_nodes;
+	tree_level[CPUINFO_LVL_NODE].start_index = 1;
+	tree_level[CPUINFO_LVL_NODE].end_index   = n;
+
+	n++;
+	tree_level[CPUINFO_LVL_CORE].start_index = n;
+	n += tree_level[CPUINFO_LVL_CORE].num_nodes;
+	tree_level[CPUINFO_LVL_CORE].end_index   = n - 1;
+
+	tree_level[CPUINFO_LVL_PROC].start_index = n;
+	n += tree_level[CPUINFO_LVL_PROC].num_nodes;
+	tree_level[CPUINFO_LVL_PROC].end_index   = n - 1;
+
+	return num_nodes;
+}
+
+/* Build a tree representation of the CPU hierarchy using the per CPU
+ * information in __cpu_data.  Entries in __cpu_data[0..NR_CPUS] are
+ * assumed to be sorted in ascending order based on node, core_id, and
+ * proc_id (in order of significance).
+ */
+static struct cpuinfo_tree *build_cpuinfo_tree(void)
+{
+	struct cpuinfo_tree *new_tree;
+	struct cpuinfo_node *node;
+	struct cpuinfo_level tmp_level[CPUINFO_LVL_MAX];
+	int num_cpus[CPUINFO_LVL_MAX];
+	int level_rover[CPUINFO_LVL_MAX];
+	int prev_id[CPUINFO_LVL_MAX];
+	int n, id, cpu, prev_cpu, last_cpu, level;
+
+	n = enumerate_cpuinfo_nodes(tmp_level);
+
+	new_tree = kzalloc(sizeof(struct cpuinfo_tree) +
+	                   (sizeof(struct cpuinfo_node) * n), GFP_ATOMIC);
+	if (!new_tree)
+		return NULL;
+
+	new_tree->total_nodes = n;
+	memcpy(&new_tree->level, tmp_level, sizeof(tmp_level));
+
+	prev_cpu = cpu = first_cpu(cpu_online_map);
+
+	/* Initialize all levels in the tree with the first CPU */
+	for (level = CPUINFO_LVL_PROC; level >= CPUINFO_LVL_ROOT; level--) {
+		n = new_tree->level[level].start_index;
+
+		level_rover[level] = n;
+		node = &new_tree->nodes[n];
+
+		id = cpuinfo_id(cpu, level);
+		if (unlikely(id < 0)) {
+			kfree(new_tree);
+			return NULL;
+		}
+		node->id = id;
+		node->level = level;
+		node->num_cpus = 1;
+
+		node->parent_index = (level > CPUINFO_LVL_ROOT)
+		    ? new_tree->level[level - 1].start_index : -1;
+
+		node->child_start = node->child_end = node->rover =
+		    (level == CPUINFO_LVL_PROC)
+		    ? cpu : new_tree->level[level + 1].start_index;
+
+		prev_id[level] = node->id;
+		num_cpus[level] = 1;
+	}
+
+	for (last_cpu = (num_possible_cpus() - 1); last_cpu >= 0; last_cpu--) {
+		if (cpu_online(last_cpu))
+			break;
+	}
+
+	while (++cpu <= last_cpu) {
+		if (!cpu_online(cpu))
+			continue;
+
+		for (level = CPUINFO_LVL_PROC; level >= CPUINFO_LVL_ROOT;
+		     level--) {
+			id = cpuinfo_id(cpu, level);
+			if (unlikely(id < 0)) {
+				kfree(new_tree);
+				return NULL;
+			}
+
+			if ((id != prev_id[level]) || (cpu == last_cpu)) {
+				prev_id[level] = id;
+				node = &new_tree->nodes[level_rover[level]];
+				node->num_cpus = num_cpus[level];
+				num_cpus[level] = 1;
+
+				if (cpu == last_cpu)
+					node->num_cpus++;
+
+				/* Connect tree node to parent */
+				if (level == CPUINFO_LVL_ROOT)
+					node->parent_index = -1;
+				else
+					node->parent_index =
+					    level_rover[level - 1];
+
+				if (level == CPUINFO_LVL_PROC) {
+					node->child_end =
+					    (cpu == last_cpu) ? cpu : prev_cpu;
+				} else {
+					node->child_end =
+					    level_rover[level + 1] - 1;
+				}
+
+				/* Initialize the next node in the same level */
+				n = ++level_rover[level];
+				if (n <= new_tree->level[level].end_index) {
+					node = &new_tree->nodes[n];
+					node->id = id;
+					node->level = level;
+
+					/* Connect node to child */
+					node->child_start = node->child_end =
+					node->rover =
+					    (level == CPUINFO_LVL_PROC)
+					    ? cpu : level_rover[level + 1];
+				}
+			} else
+				num_cpus[level]++;
+		}
+		prev_cpu = cpu;
+	}
+
+	return new_tree;
+}
+
+static void increment_rover(struct cpuinfo_tree *t, int node_index,
+                            int root_index, const int *rover_inc_table)
+{
+	struct cpuinfo_node *node = &t->nodes[node_index];
+	int top_level, level;
+
+	top_level = t->nodes[root_index].level;
+	for (level = node->level; level >= top_level; level--) {
+		node->rover++;
+		if (node->rover <= node->child_end)
+			return;
+
+		node->rover = node->child_start;
+		/* If parent's rover does not need to be adjusted, stop here. */
+		if ((level == top_level) ||
+		    !(rover_inc_table[level] & ROVER_INC_PARENT_ON_LOOP))
+			return;
+
+		node = &t->nodes[node->parent_index];
+	}
+}
+
+static int iterate_cpu(struct cpuinfo_tree *t, unsigned int root_index)
+{
+	const int *rover_inc_table;
+	int level, new_index, index = root_index;
+
+	switch (sun4v_chip_type) {
+	case SUN4V_CHIP_NIAGARA1:
+	case SUN4V_CHIP_NIAGARA2:
+		rover_inc_table = niagara_iterate_method;
+		break;
+	default:
+		rover_inc_table = generic_iterate_method;
+	}
+
+	for (level = t->nodes[root_index].level; level < CPUINFO_LVL_MAX;
+	     level++) {
+		new_index = t->nodes[index].rover;
+		if (rover_inc_table[level] & ROVER_INC_ON_VISIT)
+			increment_rover(t, index, root_index, rover_inc_table);
+
+		index = new_index;
+	}
+	return index;
+}
+
+static void _cpu_map_rebuild(void)
+{
+	int i;
+
+	if (cpuinfo_tree) {
+		kfree(cpuinfo_tree);
+		cpuinfo_tree = NULL;
+	}
+
+	cpuinfo_tree = build_cpuinfo_tree();
+	if (!cpuinfo_tree)
+		return;
+
+	/* Build CPU distribution map that spans all online CPUs.  No need
+	 * to check if the CPU is online, as that is done when the cpuinfo
+	 * tree is being built.
+	 */
+	for (i = 0; i < cpuinfo_tree->nodes[0].num_cpus; i++)
+		cpu_distribution_map[i] = iterate_cpu(cpuinfo_tree, 0);
+}
+
+/* Fallback if the cpuinfo tree could not be built.  CPU mapping is linear
+ * round robin.
+ */
+static int simple_map_to_cpu(unsigned int index)
+{
+	int i, end, cpu_rover;
+
+	cpu_rover = 0;
+	end = index % num_online_cpus();
+	for (i = 0; i < num_possible_cpus(); i++) {
+		if (cpu_online(cpu_rover)) {
+			if (cpu_rover >= end)
+				return cpu_rover;
+
+			cpu_rover++;
+		}
+	}
+
+	/* Impossible, since num_online_cpus() <= num_possible_cpus() */
+	return first_cpu(cpu_online_map);
+}
+
+static int _map_to_cpu(unsigned int index)
+{
+	struct cpuinfo_node *root_node;
+
+	if (unlikely(!cpuinfo_tree)) {
+		_cpu_map_rebuild();
+		if (!cpuinfo_tree)
+			return simple_map_to_cpu(index);
+	}
+
+	root_node = &cpuinfo_tree->nodes[0];
+#ifdef CONFIG_HOTPLUG_CPU
+	if (unlikely(root_node->num_cpus != num_online_cpus())) {
+		_cpu_map_rebuild();
+		if (!cpuinfo_tree)
+			return simple_map_to_cpu(index);
+	}
+#endif
+	return cpu_distribution_map[index % root_node->num_cpus];
+}
+
+int map_to_cpu(unsigned int index)
+{
+	int mapped_cpu;
+	unsigned long flag;
+
+	spin_lock_irqsave(&cpu_map_lock, flag);
+	mapped_cpu = _map_to_cpu(index);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	while (unlikely(!cpu_online(mapped_cpu)))
+		mapped_cpu = _map_to_cpu(index);
+#endif
+	spin_unlock_irqrestore(&cpu_map_lock, flag);
+	return mapped_cpu;
+}
+EXPORT_SYMBOL(map_to_cpu);
+
+void cpu_map_rebuild(void)
+{
+	unsigned long flag;
+
+	spin_lock_irqsave(&cpu_map_lock, flag);
+	_cpu_map_rebuild();
+	spin_unlock_irqrestore(&cpu_map_lock, flag);
+}
diff --git a/arch/sparc/kernel/cpumap.h b/arch/sparc/kernel/cpumap.h
new file mode 100644
index 00000000000..e639880ab86
--- /dev/null
+++ b/arch/sparc/kernel/cpumap.h
@@ -0,0 +1,16 @@
+#ifndef _CPUMAP_H
+#define _CPUMAP_H
+
+#ifdef CONFIG_SMP
+extern void cpu_map_rebuild(void);
+extern int  map_to_cpu(unsigned int index);
+#define cpu_map_init() cpu_map_rebuild()
+#else
+#define cpu_map_init() do {} while (0)
+static inline int map_to_cpu(unsigned int index)
+{
+	return raw_smp_processor_id();
+}
+#endif
+
+#endif
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index ebc8403b035..524c32f97c5 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -35,8 +35,8 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 }
 EXPORT_SYMBOL(dma_set_mask);
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t flag)
+static void *dma32_alloc_coherent(struct device *dev, size_t size,
+				  dma_addr_t *dma_handle, gfp_t flag)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -44,10 +44,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 #endif
 	return sbus_alloc_consistent(dev, size, dma_handle);
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *cpu_addr, dma_addr_t dma_handle)
+static void dma32_free_coherent(struct device *dev, size_t size,
+				void *cpu_addr, dma_addr_t dma_handle)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -58,38 +57,10 @@ void dma_free_coherent(struct device *dev, size_t size,
 #endif
 	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
-dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-			  size_t size, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_map_single(to_pci_dev(dev), cpu_addr,
-				      size, (int)direction);
-#endif
-	return sbus_map_single(dev, cpu_addr, size, (int)direction);
-}
-EXPORT_SYMBOL(dma_map_single);
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-		      size_t size,
-		      enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_unmap_single(to_pci_dev(dev), dma_addr,
-				 size, (int)direction);
-		return;
-	}
-#endif
-	sbus_unmap_single(dev, dma_addr, size, (int)direction);
-}
-EXPORT_SYMBOL(dma_unmap_single);
-
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			unsigned long offset, size_t size,
-			enum dma_data_direction direction)
+static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -99,10 +70,9 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	return sbus_map_single(dev, page_address(page) + offset,
 			       size, (int)direction);
 }
-EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-		    size_t size, enum dma_data_direction direction)
+static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
+			     size_t size, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -113,10 +83,9 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 #endif
 	sbus_unmap_single(dev, dma_address, size, (int)direction);
 }
-EXPORT_SYMBOL(dma_unmap_page);
 
-int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
+static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -124,10 +93,9 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg,
 #endif
 	return sbus_map_sg(dev, sg, nents, direction);
 }
-EXPORT_SYMBOL(dma_map_sg);
 
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-		  int nents, enum dma_data_direction direction)
+void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
+		    int nents, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -137,10 +105,10 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 #endif
 	sbus_unmap_sg(dev, sg, nents, (int)direction);
 }
-EXPORT_SYMBOL(dma_unmap_sg);
 
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			     size_t size, enum dma_data_direction direction)
+static void dma32_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				      size_t size,
+				      enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -151,10 +119,10 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 #endif
 	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
 }
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
 
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-				size_t size, enum dma_data_direction direction)
+static void dma32_sync_single_for_device(struct device *dev,
+					 dma_addr_t dma_handle, size_t size,
+					 enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -165,28 +133,9 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
 #endif
 	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
 }
-EXPORT_SYMBOL(dma_sync_single_for_device);
-
-void dma_sync_single_range_for_cpu(struct device *dev,
-				   dma_addr_t dma_handle,
-				   unsigned long offset,
-				   size_t size,
-				   enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
-
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_device);
 
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-			 int nelems, enum dma_data_direction direction)
+static void dma32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				  int nelems, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -197,11 +146,10 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 #endif
 	BUG();
 }
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 
-void dma_sync_sg_for_device(struct device *dev,
-			    struct scatterlist *sg, int nelems,
-			    enum dma_data_direction direction)
+static void dma32_sync_sg_for_device(struct device *dev,
+				     struct scatterlist *sg, int nelems,
+				     enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -212,16 +160,19 @@ void dma_sync_sg_for_device(struct device *dev,
 #endif
 	BUG();
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return (dma_addr == DMA_ERROR_CODE);
-}
-EXPORT_SYMBOL(dma_mapping_error);
-
-int dma_get_cache_alignment(void)
-{
-	return 32;
-}
-EXPORT_SYMBOL(dma_get_cache_alignment);
+static const struct dma_ops dma32_dma_ops = {
+	.alloc_coherent		= dma32_alloc_coherent,
+	.free_coherent		= dma32_free_coherent,
+	.map_page		= dma32_map_page,
+	.unmap_page		= dma32_unmap_page,
+	.map_sg			= dma32_map_sg,
+	.unmap_sg		= dma32_unmap_sg,
+	.sync_single_for_cpu	= dma32_sync_single_for_cpu,
+	.sync_single_for_device	= dma32_sync_single_for_device,
+	.sync_sg_for_cpu	= dma32_sync_sg_for_cpu,
+	.sync_sg_for_device	= dma32_sync_sg_for_device,
+};
+
+const struct dma_ops *dma_ops = &dma32_dma_ops;
+EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 90350f838f0..4a700f4b79c 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -544,7 +544,8 @@ static int __cpuinit dr_cpu_configure(struct ds_info *dp,
 			     resp_len, ncpus, mask,
 			     DR_CPU_STAT_CONFIGURED);
 
-	mdesc_fill_in_cpu_data(*mask);
+	mdesc_populate_present_mask(mask);
+	mdesc_fill_in_cpu_data(mask);
 
 	for_each_cpu_mask(cpu, *mask) {
 		int err;
diff --git a/arch/sparc/kernel/ftrace.c b/arch/sparc/kernel/ftrace.c
index d0218e73f98..d3b1a307656 100644
--- a/arch/sparc/kernel/ftrace.c
+++ b/arch/sparc/kernel/ftrace.c
@@ -7,14 +7,10 @@
 
 #include <asm/ftrace.h>
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 static const u32 ftrace_nop = 0x01000000;
 
-unsigned char *ftrace_nop_replace(void)
-{
-	return (char *)&ftrace_nop;
-}
-
-unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+static u32 ftrace_call_replace(unsigned long ip, unsigned long addr)
 {
 	static u32 call;
 	s32 off;
@@ -22,15 +18,11 @@ unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 	off = ((s32)addr - (s32)ip);
 	call = 0x40000000 | ((u32)off >> 2);
 
-	return (unsigned char *) &call;
+	return call;
 }
 
-int
-ftrace_modify_code(unsigned long ip, unsigned char *old_code,
-		   unsigned char *new_code)
+static int ftrace_modify_code(unsigned long ip, u32 old, u32 new)
 {
-	u32 old = *(u32 *)old_code;
-	u32 new = *(u32 *)new_code;
 	u32 replaced;
 	int faulted;
 
@@ -59,18 +51,43 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	return faulted;
 }
 
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	u32 old, new;
+
+	old = ftrace_call_replace(ip, addr);
+	new = ftrace_nop;
+	return ftrace_modify_code(ip, old, new);
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	u32 old, new;
+
+	old = ftrace_nop;
+	new = ftrace_call_replace(ip, addr);
+	return ftrace_modify_code(ip, old, new);
+}
+
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned long ip = (unsigned long)(&ftrace_call);
-	unsigned char old[MCOUNT_INSN_SIZE], *new;
+	u32 old, new;
 
-	memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
+	old = *(u32 *) &ftrace_call;
 	new = ftrace_call_replace(ip, (unsigned long)func);
 	return ftrace_modify_code(ip, old, new);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
-	ftrace_mcount_set(data);
+	unsigned long *p = data;
+
+	*p = 0;
+
 	return 0;
 }
+#endif
+
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 91bf4c7f79b..f8f21050448 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -641,28 +641,6 @@ tlb_fixup_done:
 	/* Not reached... */
 
 1:
-	/* If we boot on a non-zero cpu, all of the per-cpu
-	 * variable references we make before setting up the
-	 * per-cpu areas will use a bogus offset.  Put a
-	 * compensating factor into __per_cpu_base to handle
-	 * this cleanly.
-	 *
-	 * What the per-cpu code calculates is:
-	 *
-	 *	__per_cpu_base + (cpu << __per_cpu_shift)
-	 *
-	 * These two variables are zero initially, so to
-	 * make it all cancel out to zero we need to put
-	 * "0 - (cpu << 0)" into __per_cpu_base so that the
-	 * above formula evaluates to zero.
-	 *
-	 * We cannot even perform a printk() until this stuff
-	 * is setup as that calls cpu_clock() which uses
-	 * per-cpu variables.
-	 */
-	sub	%g0, %o0, %o1
-	sethi	%hi(__per_cpu_base), %o2
-	stx	%o1, [%o2 + %lo(__per_cpu_base)]
 #else
 	mov	0, %o0
 #endif
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index d8900e1d5aa..0aeaefe696b 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -351,8 +351,9 @@ static void dma_4u_free_coherent(struct device *dev, size_t size,
 		free_pages((unsigned long)cpu, order);
 }
 
-static dma_addr_t dma_4u_map_single(struct device *dev, void *ptr, size_t sz,
-				    enum dma_data_direction direction)
+static dma_addr_t dma_4u_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t sz,
+				  enum dma_data_direction direction)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -368,7 +369,7 @@ static dma_addr_t dma_4u_map_single(struct device *dev, void *ptr, size_t sz,
 	if (unlikely(direction == DMA_NONE))
 		goto bad_no_ctx;
 
-	oaddr = (unsigned long)ptr;
+	oaddr = (unsigned long)(page_address(page) + offset);
 	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
 
@@ -472,8 +473,8 @@ do_flush_sync:
 		       vaddr, ctx, npages);
 }
 
-static void dma_4u_unmap_single(struct device *dev, dma_addr_t bus_addr,
-				size_t sz, enum dma_data_direction direction)
+static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
+			      size_t sz, enum dma_data_direction direction)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -824,8 +825,8 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 static const struct dma_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
-	.map_single		= dma_4u_map_single,
-	.unmap_single		= dma_4u_unmap_single,
+	.map_page		= dma_4u_map_page,
+	.unmap_page		= dma_4u_unmap_page,
 	.map_sg			= dma_4u_map_sg,
 	.unmap_sg		= dma_4u_unmap_sg,
 	.sync_single_for_cpu	= dma_4u_sync_single_for_cpu,
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index e5e78f9cfc9..bd075054942 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -45,6 +45,7 @@
 #include <asm/cacheflush.h>
 
 #include "entry.h"
+#include "cpumap.h"
 
 #define NUM_IVECS	(IMAP_INR + 1)
 
@@ -256,35 +257,13 @@ static int irq_choose_cpu(unsigned int virt_irq)
 	int cpuid;
 
 	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
-	if (cpus_equal(mask, CPU_MASK_ALL)) {
-		static int irq_rover;
-		static DEFINE_SPINLOCK(irq_rover_lock);
-		unsigned long flags;
-
-		/* Round-robin distribution... */
-	do_round_robin:
-		spin_lock_irqsave(&irq_rover_lock, flags);
-
-		while (!cpu_online(irq_rover)) {
-			if (++irq_rover >= nr_cpu_ids)
-				irq_rover = 0;
-		}
-		cpuid = irq_rover;
-		do {
-			if (++irq_rover >= nr_cpu_ids)
-				irq_rover = 0;
-		} while (!cpu_online(irq_rover));
-
-		spin_unlock_irqrestore(&irq_rover_lock, flags);
+	if (cpus_equal(mask, cpu_online_map)) {
+		cpuid = map_to_cpu(virt_irq);
 	} else {
 		cpumask_t tmp;
 
 		cpus_and(tmp, cpu_online_map, mask);
-
-		if (cpus_empty(tmp))
-			goto do_round_robin;
-
-		cpuid = first_cpu(tmp);
+		cpuid = cpus_empty(tmp) ? map_to_cpu(virt_irq) : first_cpu(tmp);
 	}
 
 	return cpuid;
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index f0e6ed23a46..938da19dc06 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -574,7 +574,7 @@ static void __init report_platform_properties(void)
 	mdesc_release(hp);
 }
 
-static void __devinit fill_in_one_cache(cpuinfo_sparc *c,
+static void __cpuinit fill_in_one_cache(cpuinfo_sparc *c,
 					struct mdesc_handle *hp,
 					u64 mp)
 {
@@ -619,8 +619,7 @@ static void __devinit fill_in_one_cache(cpuinfo_sparc *c,
 	}
 }
 
-static void __devinit mark_core_ids(struct mdesc_handle *hp, u64 mp,
-				    int core_id)
+static void __cpuinit mark_core_ids(struct mdesc_handle *hp, u64 mp, int core_id)
 {
 	u64 a;
 
@@ -653,7 +652,7 @@ static void __devinit mark_core_ids(struct mdesc_handle *hp, u64 mp,
 	}
 }
 
-static void __devinit set_core_ids(struct mdesc_handle *hp)
+static void __cpuinit set_core_ids(struct mdesc_handle *hp)
 {
 	int idx;
 	u64 mp;
@@ -678,8 +677,7 @@ static void __devinit set_core_ids(struct mdesc_handle *hp)
 	}
 }
 
-static void __devinit mark_proc_ids(struct mdesc_handle *hp, u64 mp,
-				    int proc_id)
+static void __cpuinit mark_proc_ids(struct mdesc_handle *hp, u64 mp, int proc_id)
 {
 	u64 a;
 
@@ -698,8 +696,7 @@ static void __devinit mark_proc_ids(struct mdesc_handle *hp, u64 mp,
 	}
 }
 
-static void __devinit __set_proc_ids(struct mdesc_handle *hp,
-				     const char *exec_unit_name)
+static void __cpuinit __set_proc_ids(struct mdesc_handle *hp, const char *exec_unit_name)
 {
 	int idx;
 	u64 mp;
@@ -720,13 +717,13 @@ static void __devinit __set_proc_ids(struct mdesc_handle *hp,
 	}
 }
 
-static void __devinit set_proc_ids(struct mdesc_handle *hp)
+static void __cpuinit set_proc_ids(struct mdesc_handle *hp)
 {
 	__set_proc_ids(hp, "exec_unit");
 	__set_proc_ids(hp, "exec-unit");
 }
 
-static void __devinit get_one_mondo_bits(const u64 *p, unsigned int *mask,
+static void __cpuinit get_one_mondo_bits(const u64 *p, unsigned int *mask,
 					 unsigned char def)
 {
 	u64 val;
@@ -745,7 +742,7 @@ use_default:
 	*mask = ((1U << def) * 64U) - 1U;
 }
 
-static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
+static void __cpuinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
 				     struct trap_per_cpu *tb)
 {
 	const u64 *val;
@@ -763,23 +760,15 @@ static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
 	get_one_mondo_bits(val, &tb->nonresum_qmask, 2);
 }
 
-void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask)
+static void * __cpuinit mdesc_iterate_over_cpus(void *(*func)(struct mdesc_handle *, u64, int, void *), void *arg, cpumask_t *mask)
 {
 	struct mdesc_handle *hp = mdesc_grab();
+	void *ret = NULL;
 	u64 mp;
 
-	ncpus_probed = 0;
 	mdesc_for_each_node_by_name(hp, mp, "cpu") {
 		const u64 *id = mdesc_get_property(hp, mp, "id", NULL);
-		const u64 *cfreq = mdesc_get_property(hp, mp, "clock-frequency", NULL);
-		struct trap_per_cpu *tb;
-		cpuinfo_sparc *c;
-		int cpuid;
-		u64 a;
-
-		ncpus_probed++;
-
-		cpuid = *id;
+		int cpuid = *id;
 
 #ifdef CONFIG_SMP
 		if (cpuid >= NR_CPUS) {
@@ -788,62 +777,104 @@ void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask)
 			       cpuid, NR_CPUS);
 			continue;
 		}
-		if (!cpu_isset(cpuid, mask))
+		if (!cpu_isset(cpuid, *mask))
 			continue;
-#else
-		/* On uniprocessor we only want the values for the
-		 * real physical cpu the kernel booted onto, however
-		 * cpu_data() only has one entry at index 0.
-		 */
-		if (cpuid != real_hard_smp_processor_id())
-			continue;
-		cpuid = 0;
 #endif
 
-		c = &cpu_data(cpuid);
-		c->clock_tick = *cfreq;
+		ret = func(hp, mp, cpuid, arg);
+		if (ret)
+			goto out;
+	}
+out:
+	mdesc_release(hp);
+	return ret;
+}
 
-		tb = &trap_block[cpuid];
-		get_mondo_data(hp, mp, tb);
+static void * __cpuinit record_one_cpu(struct mdesc_handle *hp, u64 mp, int cpuid, void *arg)
+{
+	ncpus_probed++;
+#ifdef CONFIG_SMP
+	set_cpu_present(cpuid, true);
+#endif
+	return NULL;
+}
 
-		mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) {
-			u64 j, t = mdesc_arc_target(hp, a);
-			const char *t_name;
+void __cpuinit mdesc_populate_present_mask(cpumask_t *mask)
+{
+	if (tlb_type != hypervisor)
+		return;
 
-			t_name = mdesc_node_name(hp, t);
-			if (!strcmp(t_name, "cache")) {
-				fill_in_one_cache(c, hp, t);
-				continue;
-			}
+	ncpus_probed = 0;
+	mdesc_iterate_over_cpus(record_one_cpu, NULL, mask);
+}
 
-			mdesc_for_each_arc(j, hp, t, MDESC_ARC_TYPE_FWD) {
-				u64 n = mdesc_arc_target(hp, j);
-				const char *n_name;
+static void * __cpuinit fill_in_one_cpu(struct mdesc_handle *hp, u64 mp, int cpuid, void *arg)
+{
+	const u64 *cfreq = mdesc_get_property(hp, mp, "clock-frequency", NULL);
+	struct trap_per_cpu *tb;
+	cpuinfo_sparc *c;
+	u64 a;
 
-				n_name = mdesc_node_name(hp, n);
-				if (!strcmp(n_name, "cache"))
-					fill_in_one_cache(c, hp, n);
-			}
+#ifndef CONFIG_SMP
+	/* On uniprocessor we only want the values for the
+	 * real physical cpu the kernel booted onto, however
+	 * cpu_data() only has one entry at index 0.
+	 */
+	if (cpuid != real_hard_smp_processor_id())
+		return NULL;
+	cpuid = 0;
+#endif
+
+	c = &cpu_data(cpuid);
+	c->clock_tick = *cfreq;
+
+	tb = &trap_block[cpuid];
+	get_mondo_data(hp, mp, tb);
+
+	mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) {
+		u64 j, t = mdesc_arc_target(hp, a);
+		const char *t_name;
+
+		t_name = mdesc_node_name(hp, t);
+		if (!strcmp(t_name, "cache")) {
+			fill_in_one_cache(c, hp, t);
+			continue;
 		}
 
-#ifdef CONFIG_SMP
-		cpu_set(cpuid, cpu_present_map);
-#endif
+		mdesc_for_each_arc(j, hp, t, MDESC_ARC_TYPE_FWD) {
+			u64 n = mdesc_arc_target(hp, j);
+			const char *n_name;
 
-		c->core_id = 0;
-		c->proc_id = -1;
+			n_name = mdesc_node_name(hp, n);
+			if (!strcmp(n_name, "cache"))
+				fill_in_one_cache(c, hp, n);
+		}
 	}
 
+	c->core_id = 0;
+	c->proc_id = -1;
+
+	return NULL;
+}
+
+void __cpuinit mdesc_fill_in_cpu_data(cpumask_t *mask)
+{
+	struct mdesc_handle *hp;
+
+	mdesc_iterate_over_cpus(fill_in_one_cpu, NULL, mask);
+
 #ifdef CONFIG_SMP
 	sparc64_multi_core = 1;
 #endif
 
+	hp = mdesc_grab();
+
 	set_core_ids(hp);
 	set_proc_ids(hp);
 
-	smp_fill_in_sib_core_maps();
-
 	mdesc_release(hp);
+
+	smp_fill_in_sib_core_maps();
 }
 
 static ssize_t mdesc_read(struct file *file, char __user *buf,
@@ -887,7 +918,6 @@ void __init sun4v_mdesc_init(void)
 {
 	struct mdesc_handle *hp;
 	unsigned long len, real_len, status;
-	cpumask_t mask;
 
 	(void) sun4v_mach_desc(0UL, 0UL, &len);
 
@@ -911,7 +941,4 @@ void __init sun4v_mdesc_init(void)
 	cur_mdesc = hp;
 
 	report_platform_properties();
-
-	cpus_setall(mask);
-	mdesc_fill_in_cpu_data(mask);
 }
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 90273765e81..0ee642f6323 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -75,8 +75,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* Make generic code ignore STT_REGISTER dummy undefined symbols.  */
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index c8f14c1dc52..90396702ea2 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -6,159 +6,11 @@
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/irq.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
-static int node_match(struct device *dev, void *data)
-{
-	struct of_device *op = to_of_device(dev);
-	struct device_node *dp = data;
-
-	return (op->node == dp);
-}
-
-struct of_device *of_find_device_by_node(struct device_node *dp)
-{
-	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
-					     dp, node_match);
-
-	if (dev)
-		return to_of_device(dev);
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
-unsigned int irq_of_parse_and_map(struct device_node *node, int index)
-{
-	struct of_device *op = of_find_device_by_node(node);
-
-	if (!op || index >= op->num_irqs)
-		return 0;
-
-	return op->irqs[index];
-}
-EXPORT_SYMBOL(irq_of_parse_and_map);
-
-/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
- * BUS and propagate to all child of_device objects.
- */
-void of_propagate_archdata(struct of_device *bus)
-{
-	struct dev_archdata *bus_sd = &bus->dev.archdata;
-	struct device_node *bus_dp = bus->node;
-	struct device_node *dp;
-
-	for (dp = bus_dp->child; dp; dp = dp->sibling) {
-		struct of_device *op = of_find_device_by_node(dp);
-
-		op->dev.archdata.iommu = bus_sd->iommu;
-		op->dev.archdata.stc = bus_sd->stc;
-		op->dev.archdata.host_controller = bus_sd->host_controller;
-		op->dev.archdata.numa_node = bus_sd->numa_node;
-
-		if (dp->child)
-			of_propagate_archdata(op);
-	}
-}
-
-struct bus_type of_platform_bus_type;
-EXPORT_SYMBOL(of_platform_bus_type);
-
-static inline u64 of_read_addr(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-static void __init get_cells(struct device_node *dp,
-			     int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = of_n_addr_cells(dp);
-	if (sizec)
-		*sizec = of_n_size_cells(dp);
-}
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-
-struct of_bus {
-	const char	*name;
-	const char	*addr_prop_name;
-	int		(*match)(struct device_node *parent);
-	void		(*count_cells)(struct device_node *child,
-				       int *addrc, int *sizec);
-	int		(*map)(u32 *addr, const u32 *range,
-			       int na, int ns, int pna);
-	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
-};
-
-/*
- * Default translator (generic bus)
- */
-
-static void of_bus_default_count_cells(struct device_node *dev,
-				       int *addrc, int *sizec)
-{
-	get_cells(dev, addrc, sizec);
-}
-
-/* Make sure the least significant 64-bits are in-range.  Even
- * for 3 or 4 cell values it is a good enough approximation.
- */
-static int of_out_of_range(const u32 *addr, const u32 *base,
-			   const u32 *size, int na, int ns)
-{
-	u64 a = of_read_addr(addr, na);
-	u64 b = of_read_addr(base, na);
-
-	if (a < b)
-		return 1;
-
-	b += of_read_addr(size, ns);
-	if (a >= b)
-		return 1;
-
-	return 0;
-}
-
-static int of_bus_default_map(u32 *addr, const u32 *range,
-			      int na, int ns, int pna)
-{
-	u32 result[OF_MAX_ADDR_CELLS];
-	int i;
-
-	if (ns > 2) {
-		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
-		return -EINVAL;
-	}
-
-	if (of_out_of_range(addr, range, range + na + pna, na, ns))
-		return -EINVAL;
-
-	/* Start with the parent range base.  */
-	memcpy(result, range + na, pna * 4);
-
-	/* Add in the child address offset.  */
-	for (i = 0; i < na; i++)
-		result[pna - 1 - i] +=
-			(addr[na - 1 - i] -
-			 range[na - 1 - i]);
-
-	memcpy(addr, result, pna * 4);
-
-	return 0;
-}
-
-static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
-{
-	if (flags)
-		return flags;
-	return IORESOURCE_MEM;
-}
+#include "of_device_common.h"
 
 /*
  * PCI bus specific translator
@@ -240,47 +92,6 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 	return flags;
 }
 
-/*
- * SBUS bus specific translator
- */
-
-static int of_bus_sbus_match(struct device_node *np)
-{
-	struct device_node *dp = np;
-
-	while (dp) {
-		if (!strcmp(dp->name, "sbus") ||
-		    !strcmp(dp->name, "sbi"))
-			return 1;
-
-		/* Have a look at use_1to1_mapping().  We're trying
-		 * to match SBUS if that's the top-level bus and we
-		 * don't have some intervening real bus that provides
-		 * ranges based translations.
-		 */
-		if (of_find_property(dp, "ranges", NULL) != NULL)
-			break;
-
-		dp = dp->parent;
-	}
-
-	return 0;
-}
-
-static void of_bus_sbus_count_cells(struct device_node *child,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
-{
-	return of_bus_default_map(addr, range, na, ns, pna);
-}
-
 static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 {
 	return IORESOURCE_MEM;
@@ -307,7 +118,7 @@ static struct of_bus of_busses[] = {
 		.addr_prop_name = "reg",
 		.match = of_bus_sbus_match,
 		.count_cells = of_bus_sbus_count_cells,
-		.map = of_bus_sbus_map,
+		.map = of_bus_default_map,
 		.get_flags = of_bus_sbus_get_flags,
 	},
 	/* Default */
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 5ac287ac03d..881947e59e9 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -10,6 +10,8 @@
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
+#include "of_device_common.h"
+
 void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name)
 {
 	unsigned long ret = res->start + offset;
@@ -35,156 +37,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
 }
 EXPORT_SYMBOL(of_iounmap);
 
-static int node_match(struct device *dev, void *data)
-{
-	struct of_device *op = to_of_device(dev);
-	struct device_node *dp = data;
-
-	return (op->node == dp);
-}
-
-struct of_device *of_find_device_by_node(struct device_node *dp)
-{
-	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
-					     dp, node_match);
-
-	if (dev)
-		return to_of_device(dev);
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
-unsigned int irq_of_parse_and_map(struct device_node *node, int index)
-{
-	struct of_device *op = of_find_device_by_node(node);
-
-	if (!op || index >= op->num_irqs)
-		return 0;
-
-	return op->irqs[index];
-}
-EXPORT_SYMBOL(irq_of_parse_and_map);
-
-/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
- * BUS and propagate to all child of_device objects.
- */
-void of_propagate_archdata(struct of_device *bus)
-{
-	struct dev_archdata *bus_sd = &bus->dev.archdata;
-	struct device_node *bus_dp = bus->node;
-	struct device_node *dp;
-
-	for (dp = bus_dp->child; dp; dp = dp->sibling) {
-		struct of_device *op = of_find_device_by_node(dp);
-
-		op->dev.archdata.iommu = bus_sd->iommu;
-		op->dev.archdata.stc = bus_sd->stc;
-		op->dev.archdata.host_controller = bus_sd->host_controller;
-		op->dev.archdata.numa_node = bus_sd->numa_node;
-
-		if (dp->child)
-			of_propagate_archdata(op);
-	}
-}
-
-struct bus_type of_platform_bus_type;
-EXPORT_SYMBOL(of_platform_bus_type);
-
-static inline u64 of_read_addr(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-static void get_cells(struct device_node *dp, int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = of_n_addr_cells(dp);
-	if (sizec)
-		*sizec = of_n_size_cells(dp);
-}
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-
-struct of_bus {
-	const char	*name;
-	const char	*addr_prop_name;
-	int		(*match)(struct device_node *parent);
-	void		(*count_cells)(struct device_node *child,
-				       int *addrc, int *sizec);
-	int		(*map)(u32 *addr, const u32 *range,
-			       int na, int ns, int pna);
-	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
-};
-
-/*
- * Default translator (generic bus)
- */
-
-static void of_bus_default_count_cells(struct device_node *dev,
-				       int *addrc, int *sizec)
-{
-	get_cells(dev, addrc, sizec);
-}
-
-/* Make sure the least significant 64-bits are in-range.  Even
- * for 3 or 4 cell values it is a good enough approximation.
- */
-static int of_out_of_range(const u32 *addr, const u32 *base,
-			   const u32 *size, int na, int ns)
-{
-	u64 a = of_read_addr(addr, na);
-	u64 b = of_read_addr(base, na);
-
-	if (a < b)
-		return 1;
-
-	b += of_read_addr(size, ns);
-	if (a >= b)
-		return 1;
-
-	return 0;
-}
-
-static int of_bus_default_map(u32 *addr, const u32 *range,
-			      int na, int ns, int pna)
-{
-	u32 result[OF_MAX_ADDR_CELLS];
-	int i;
-
-	if (ns > 2) {
-		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
-		return -EINVAL;
-	}
-
-	if (of_out_of_range(addr, range, range + na + pna, na, ns))
-		return -EINVAL;
-
-	/* Start with the parent range base.  */
-	memcpy(result, range + na, pna * 4);
-
-	/* Add in the child address offset.  */
-	for (i = 0; i < na; i++)
-		result[pna - 1 - i] +=
-			(addr[na - 1 - i] -
-			 range[na - 1 - i]);
-
-	memcpy(addr, result, pna * 4);
-
-	return 0;
-}
-
-static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
-{
-	if (flags)
-		return flags;
-	return IORESOURCE_MEM;
-}
-
 /*
  * PCI bus specific translator
  */
@@ -295,42 +147,6 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 }
 
 /*
- * SBUS bus specific translator
- */
-
-static int of_bus_sbus_match(struct device_node *np)
-{
-	struct device_node *dp = np;
-
-	while (dp) {
-		if (!strcmp(dp->name, "sbus") ||
-		    !strcmp(dp->name, "sbi"))
-			return 1;
-
-		/* Have a look at use_1to1_mapping().  We're trying
-		 * to match SBUS if that's the top-level bus and we
-		 * don't have some intervening real bus that provides
-		 * ranges based translations.
-		 */
-		if (of_find_property(dp, "ranges", NULL) != NULL)
-			break;
-
-		dp = dp->parent;
-	}
-
-	return 0;
-}
-
-static void of_bus_sbus_count_cells(struct device_node *child,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-/*
  * FHC/Central bus specific translator.
  *
  * This is just needed to hard-code the address and size cell
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
new file mode 100644
index 00000000000..cb8eb799bb6
--- /dev/null
+++ b/arch/sparc/kernel/of_device_common.c
@@ -0,0 +1,174 @@
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include "of_device_common.h"
+
+static int node_match(struct device *dev, void *data)
+{
+	struct of_device *op = to_of_device(dev);
+	struct device_node *dp = data;
+
+	return (op->node == dp);
+}
+
+struct of_device *of_find_device_by_node(struct device_node *dp)
+{
+	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
+					     dp, node_match);
+
+	if (dev)
+		return to_of_device(dev);
+
+	return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_node);
+
+unsigned int irq_of_parse_and_map(struct device_node *node, int index)
+{
+	struct of_device *op = of_find_device_by_node(node);
+
+	if (!op || index >= op->num_irqs)
+		return 0;
+
+	return op->irqs[index];
+}
+EXPORT_SYMBOL(irq_of_parse_and_map);
+
+/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
+ * BUS and propagate to all child of_device objects.
+ */
+void of_propagate_archdata(struct of_device *bus)
+{
+	struct dev_archdata *bus_sd = &bus->dev.archdata;
+	struct device_node *bus_dp = bus->node;
+	struct device_node *dp;
+
+	for (dp = bus_dp->child; dp; dp = dp->sibling) {
+		struct of_device *op = of_find_device_by_node(dp);
+
+		op->dev.archdata.iommu = bus_sd->iommu;
+		op->dev.archdata.stc = bus_sd->stc;
+		op->dev.archdata.host_controller = bus_sd->host_controller;
+		op->dev.archdata.numa_node = bus_sd->numa_node;
+
+		if (dp->child)
+			of_propagate_archdata(op);
+	}
+}
+
+struct bus_type of_platform_bus_type;
+EXPORT_SYMBOL(of_platform_bus_type);
+
+static void get_cells(struct device_node *dp, int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = of_n_addr_cells(dp);
+	if (sizec)
+		*sizec = of_n_size_cells(dp);
+}
+
+/*
+ * Default translator (generic bus)
+ */
+
+void of_bus_default_count_cells(struct device_node *dev, int *addrc, int *sizec)
+{
+	get_cells(dev, addrc, sizec);
+}
+
+/* Make sure the least significant 64-bits are in-range.  Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+int of_out_of_range(const u32 *addr, const u32 *base,
+		    const u32 *size, int na, int ns)
+{
+	u64 a = of_read_addr(addr, na);
+	u64 b = of_read_addr(base, na);
+
+	if (a < b)
+		return 1;
+
+	b += of_read_addr(size, ns);
+	if (a >= b)
+		return 1;
+
+	return 0;
+}
+
+int of_bus_default_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+	u32 result[OF_MAX_ADDR_CELLS];
+	int i;
+
+	if (ns > 2) {
+		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+		return -EINVAL;
+	}
+
+	if (of_out_of_range(addr, range, range + na + pna, na, ns))
+		return -EINVAL;
+
+	/* Start with the parent range base.  */
+	memcpy(result, range + na, pna * 4);
+
+	/* Add in the child address offset.  */
+	for (i = 0; i < na; i++)
+		result[pna - 1 - i] +=
+			(addr[na - 1 - i] -
+			 range[na - 1 - i]);
+
+	memcpy(addr, result, pna * 4);
+
+	return 0;
+}
+
+unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
+{
+	if (flags)
+		return flags;
+	return IORESOURCE_MEM;
+}
+
+/*
+ * SBUS bus specific translator
+ */
+
+int of_bus_sbus_match(struct device_node *np)
+{
+	struct device_node *dp = np;
+
+	while (dp) {
+		if (!strcmp(dp->name, "sbus") ||
+		    !strcmp(dp->name, "sbi"))
+			return 1;
+
+		/* Have a look at use_1to1_mapping().  We're trying
+		 * to match SBUS if that's the top-level bus and we
+		 * don't have some intervening real bus that provides
+		 * ranges based translations.
+		 */
+		if (of_find_property(dp, "ranges", NULL) != NULL)
+			break;
+
+		dp = dp->parent;
+	}
+
+	return 0;
+}
+
+void of_bus_sbus_count_cells(struct device_node *child, int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 2;
+	if (sizec)
+		*sizec = 1;
+}
diff --git a/arch/sparc/kernel/of_device_common.h b/arch/sparc/kernel/of_device_common.h
new file mode 100644
index 00000000000..cdfd2399284
--- /dev/null
+++ b/arch/sparc/kernel/of_device_common.h
@@ -0,0 +1,36 @@
+#ifndef _OF_DEVICE_COMMON_H
+#define _OF_DEVICE_COMMON_H
+
+static inline u64 of_read_addr(const u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
+void of_bus_default_count_cells(struct device_node *dev, int *addrc,
+				int *sizec);
+int of_out_of_range(const u32 *addr, const u32 *base,
+		    const u32 *size, int na, int ns);
+int of_bus_default_map(u32 *addr, const u32 *range, int na, int ns, int pna);
+unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags);
+
+int of_bus_sbus_match(struct device_node *np);
+void of_bus_sbus_count_cells(struct device_node *child, int *addrc, int *sizec);
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+
+struct of_bus {
+	const char	*name;
+	const char	*addr_prop_name;
+	int		(*match)(struct device_node *parent);
+	void		(*count_cells)(struct device_node *child,
+				       int *addrc, int *sizec);
+	int		(*map)(u32 *addr, const u32 *range,
+			       int na, int ns, int pna);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
+};
+
+#endif /* _OF_DEVICE_COMMON_H */
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 5db5ebed35d..2485eaa2310 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -230,8 +230,9 @@ static void dma_4v_free_coherent(struct device *dev, size_t size, void *cpu,
 		free_pages((unsigned long)cpu, order);
 }
 
-static dma_addr_t dma_4v_map_single(struct device *dev, void *ptr, size_t sz,
-				    enum dma_data_direction direction)
+static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t sz,
+				  enum dma_data_direction direction)
 {
 	struct iommu *iommu;
 	unsigned long flags, npages, oaddr;
@@ -245,7 +246,7 @@ static dma_addr_t dma_4v_map_single(struct device *dev, void *ptr, size_t sz,
 	if (unlikely(direction == DMA_NONE))
 		goto bad;
 
-	oaddr = (unsigned long)ptr;
+	oaddr = (unsigned long)(page_address(page) + offset);
 	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
 
@@ -294,8 +295,8 @@ iommu_map_fail:
 	return DMA_ERROR_CODE;
 }
 
-static void dma_4v_unmap_single(struct device *dev, dma_addr_t bus_addr,
-				size_t sz, enum dma_data_direction direction)
+static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
+			      size_t sz, enum dma_data_direction direction)
 {
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
@@ -537,8 +538,8 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 static const struct dma_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
-	.map_single			= dma_4v_map_single,
-	.unmap_single			= dma_4v_unmap_single,
+	.map_page			= dma_4v_map_page,
+	.unmap_page			= dma_4v_unmap_page,
 	.map_sg				= dma_4v_map_sg,
 	.unmap_sg			= dma_4v_unmap_sg,
 	.sync_single_for_cpu		= dma_4v_sync_single_for_cpu,
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index bb0f0fda6ca..453397fe5e1 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -22,7 +22,6 @@ static inline int is_root_node(const struct device_node *dp)
 
 extern char *build_path_component(struct device_node *dp);
 extern void of_console_init(void);
-extern void of_fill_in_cpu_data(void);
 
 extern unsigned int prom_early_allocated;
 
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index ca55c7012f7..fb06ac2bd38 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -374,75 +374,26 @@ static const char *get_mid_prop(void)
 	return (tlb_type == spitfire ? "upa-portid" : "portid");
 }
 
-struct device_node *of_find_node_by_cpuid(int cpuid)
-{
-	struct device_node *dp;
-	const char *mid_prop = get_mid_prop();
-
-	for_each_node_by_type(dp, "cpu") {
-		int id = of_getintprop_default(dp, mid_prop, -1);
-		const char *this_mid_prop = mid_prop;
-
-		if (id < 0) {
-			this_mid_prop = "cpuid";
-			id = of_getintprop_default(dp, this_mid_prop, -1);
-		}
-
-		if (id < 0) {
-			prom_printf("OF: Serious problem, cpu lacks "
-				    "%s property", this_mid_prop);
-			prom_halt();
-		}
-		if (cpuid == id)
-			return dp;
-	}
-	return NULL;
-}
-
-void __init of_fill_in_cpu_data(void)
+static void *of_iterate_over_cpus(void *(*func)(struct device_node *, int, int), int arg)
 {
 	struct device_node *dp;
 	const char *mid_prop;
 
-	if (tlb_type == hypervisor)
-		return;
-
 	mid_prop = get_mid_prop();
-	ncpus_probed = 0;
 	for_each_node_by_type(dp, "cpu") {
 		int cpuid = of_getintprop_default(dp, mid_prop, -1);
 		const char *this_mid_prop = mid_prop;
-		struct device_node *portid_parent;
-		int portid = -1;
+		void *ret;
 
-		portid_parent = NULL;
 		if (cpuid < 0) {
 			this_mid_prop = "cpuid";
 			cpuid = of_getintprop_default(dp, this_mid_prop, -1);
-			if (cpuid >= 0) {
-				int limit = 2;
-
-				portid_parent = dp;
-				while (limit--) {
-					portid_parent = portid_parent->parent;
-					if (!portid_parent)
-						break;
-					portid = of_getintprop_default(portid_parent,
-								       "portid", -1);
-					if (portid >= 0)
-						break;
-				}
-			}
 		}
-
 		if (cpuid < 0) {
 			prom_printf("OF: Serious problem, cpu lacks "
 				    "%s property", this_mid_prop);
 			prom_halt();
 		}
-
-		ncpus_probed++;
-
 #ifdef CONFIG_SMP
 		if (cpuid >= NR_CPUS) {
 			printk(KERN_WARNING "Ignoring CPU %d which is "
@@ -450,79 +401,142 @@ void __init of_fill_in_cpu_data(void)
 			       cpuid, NR_CPUS);
 			continue;
 		}
-#else
-		/* On uniprocessor we only want the values for the
-		 * real physical cpu the kernel booted onto, however
-		 * cpu_data() only has one entry at index 0.
-		 */
-		if (cpuid != real_hard_smp_processor_id())
-			continue;
-		cpuid = 0;
 #endif
+		ret = func(dp, cpuid, arg);
+		if (ret)
+			return ret;
+	}
+	return NULL;
+}
 
-		cpu_data(cpuid).clock_tick =
-			of_getintprop_default(dp, "clock-frequency", 0);
-
-		if (portid_parent) {
-			cpu_data(cpuid).dcache_size =
-				of_getintprop_default(dp, "l1-dcache-size",
-						      16 * 1024);
-			cpu_data(cpuid).dcache_line_size =
-				of_getintprop_default(dp, "l1-dcache-line-size",
-						      32);
-			cpu_data(cpuid).icache_size =
-				of_getintprop_default(dp, "l1-icache-size",
-						      8 * 1024);
-			cpu_data(cpuid).icache_line_size =
-				of_getintprop_default(dp, "l1-icache-line-size",
-						      32);
-			cpu_data(cpuid).ecache_size =
-				of_getintprop_default(dp, "l2-cache-size", 0);
-			cpu_data(cpuid).ecache_line_size =
-				of_getintprop_default(dp, "l2-cache-line-size", 0);
-			if (!cpu_data(cpuid).ecache_size ||
-			    !cpu_data(cpuid).ecache_line_size) {
-				cpu_data(cpuid).ecache_size =
-					of_getintprop_default(portid_parent,
-							      "l2-cache-size",
-							      (4 * 1024 * 1024));
-				cpu_data(cpuid).ecache_line_size =
-					of_getintprop_default(portid_parent,
-							      "l2-cache-line-size", 64);
-			}
-
-			cpu_data(cpuid).core_id = portid + 1;
-			cpu_data(cpuid).proc_id = portid;
+static void *check_cpu_node(struct device_node *dp, int cpuid, int id)
+{
+	if (id == cpuid)
+		return dp;
+	return NULL;
+}
+
+struct device_node *of_find_node_by_cpuid(int cpuid)
+{
+	return of_iterate_over_cpus(check_cpu_node, cpuid);
+}
+
+static void *record_one_cpu(struct device_node *dp, int cpuid, int arg)
+{
+	ncpus_probed++;
 #ifdef CONFIG_SMP
-			sparc64_multi_core = 1;
+	set_cpu_present(cpuid, true);
+	set_cpu_possible(cpuid, true);
 #endif
-		} else {
-			cpu_data(cpuid).dcache_size =
-				of_getintprop_default(dp, "dcache-size", 16 * 1024);
-			cpu_data(cpuid).dcache_line_size =
-				of_getintprop_default(dp, "dcache-line-size", 32);
+	return NULL;
+}
 
-			cpu_data(cpuid).icache_size =
-				of_getintprop_default(dp, "icache-size", 16 * 1024);
-			cpu_data(cpuid).icache_line_size =
-				of_getintprop_default(dp, "icache-line-size", 32);
+void __init of_populate_present_mask(void)
+{
+	if (tlb_type == hypervisor)
+		return;
+
+	ncpus_probed = 0;
+	of_iterate_over_cpus(record_one_cpu, 0);
+}
 
+static void *fill_in_one_cpu(struct device_node *dp, int cpuid, int arg)
+{
+	struct device_node *portid_parent = NULL;
+	int portid = -1;
+
+	if (of_find_property(dp, "cpuid", NULL)) {
+		int limit = 2;
+
+		portid_parent = dp;
+		while (limit--) {
+			portid_parent = portid_parent->parent;
+			if (!portid_parent)
+				break;
+			portid = of_getintprop_default(portid_parent,
+						       "portid", -1);
+			if (portid >= 0)
+				break;
+		}
+	}
+
+#ifndef CONFIG_SMP
+	/* On uniprocessor we only want the values for the
+	 * real physical cpu the kernel booted onto, however
+	 * cpu_data() only has one entry at index 0.
+	 */
+	if (cpuid != real_hard_smp_processor_id())
+		return NULL;
+	cpuid = 0;
+#endif
+
+	cpu_data(cpuid).clock_tick =
+		of_getintprop_default(dp, "clock-frequency", 0);
+
+	if (portid_parent) {
+		cpu_data(cpuid).dcache_size =
+			of_getintprop_default(dp, "l1-dcache-size",
+					      16 * 1024);
+		cpu_data(cpuid).dcache_line_size =
+			of_getintprop_default(dp, "l1-dcache-line-size",
+					      32);
+		cpu_data(cpuid).icache_size =
+			of_getintprop_default(dp, "l1-icache-size",
+					      8 * 1024);
+		cpu_data(cpuid).icache_line_size =
+			of_getintprop_default(dp, "l1-icache-line-size",
+					      32);
+		cpu_data(cpuid).ecache_size =
+			of_getintprop_default(dp, "l2-cache-size", 0);
+		cpu_data(cpuid).ecache_line_size =
+			of_getintprop_default(dp, "l2-cache-line-size", 0);
+		if (!cpu_data(cpuid).ecache_size ||
+		    !cpu_data(cpuid).ecache_line_size) {
 			cpu_data(cpuid).ecache_size =
-				of_getintprop_default(dp, "ecache-size",
+				of_getintprop_default(portid_parent,
+						      "l2-cache-size",
 						      (4 * 1024 * 1024));
 			cpu_data(cpuid).ecache_line_size =
-				of_getintprop_default(dp, "ecache-line-size", 64);
-
-			cpu_data(cpuid).core_id = 0;
-			cpu_data(cpuid).proc_id = -1;
+				of_getintprop_default(portid_parent,
+						      "l2-cache-line-size", 64);
 		}
 
+		cpu_data(cpuid).core_id = portid + 1;
+		cpu_data(cpuid).proc_id = portid;
 #ifdef CONFIG_SMP
-		set_cpu_present(cpuid, true);
-		set_cpu_possible(cpuid, true);
+		sparc64_multi_core = 1;
 #endif
+	} else {
+		cpu_data(cpuid).dcache_size =
+			of_getintprop_default(dp, "dcache-size", 16 * 1024);
+		cpu_data(cpuid).dcache_line_size =
+			of_getintprop_default(dp, "dcache-line-size", 32);
+
+		cpu_data(cpuid).icache_size =
+			of_getintprop_default(dp, "icache-size", 16 * 1024);
+		cpu_data(cpuid).icache_line_size =
+			of_getintprop_default(dp, "icache-line-size", 32);
+
+		cpu_data(cpuid).ecache_size =
+			of_getintprop_default(dp, "ecache-size",
+					      (4 * 1024 * 1024));
+		cpu_data(cpuid).ecache_line_size =
+			of_getintprop_default(dp, "ecache-line-size", 64);
+
+		cpu_data(cpuid).core_id = 0;
+		cpu_data(cpuid).proc_id = -1;
 	}
 
+	return NULL;
+}
+
+void __init of_fill_in_cpu_data(void)
+{
+	if (tlb_type == hypervisor)
+		return;
+
+	of_iterate_over_cpus(fill_in_one_cpu, 0);
+
 	smp_fill_in_sib_core_maps();
 }
 
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index ff7b591c894..0fb5789d43c 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -313,6 +313,4 @@ void __init prom_build_devicetree(void)
 
 	printk("PROM: Built device tree with %u bytes of memory.\n",
 	       prom_early_allocated);
-
-	of_fill_in_cpu_data();
 }
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index f7642e5a94d..fa44eaf8d89 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -20,7 +20,8 @@
 #include <linux/cache.h>
 #include <linux/jiffies.h>
 #include <linux/profile.h>
-#include <linux/lmb.h>
+#include <linux/bootmem.h>
+#include <linux/vmalloc.h>
 #include <linux/cpu.h>
 
 #include <asm/head.h>
@@ -47,6 +48,8 @@
 #include <asm/ldc.h>
 #include <asm/hypervisor.h>
 
+#include "cpumap.h"
+
 int sparc64_multi_core __read_mostly;
 
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
@@ -278,7 +281,7 @@ static unsigned long kimage_addr_to_ra(void *p)
 	return kern_base + (val - KERNBASE);
 }
 
-static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg, void **descrp)
 {
 	extern unsigned long sparc64_ttable_tl0;
 	extern unsigned long kern_locked_tte_data;
@@ -298,12 +301,12 @@ static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread
 		       "hvtramp_descr.\n");
 		return;
 	}
+	*descrp = hdesc;
 
 	hdesc->cpu = cpu;
 	hdesc->num_mappings = num_kernel_image_mappings;
 
 	tb = &trap_block[cpu];
-	tb->hdesc = hdesc;
 
 	hdesc->fault_info_va = (unsigned long) &tb->fault_info;
 	hdesc->fault_info_pa = kimage_addr_to_ra(&tb->fault_info);
@@ -341,12 +344,12 @@ static struct thread_info *cpu_new_thread = NULL;
 
 static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 {
-	struct trap_per_cpu *tb = &trap_block[cpu];
 	unsigned long entry =
 		(unsigned long)(&sparc64_cpu_startup);
 	unsigned long cookie =
 		(unsigned long)(&cpu_new_thread);
 	struct task_struct *p;
+	void *descr = NULL;
 	int timeout, ret;
 
 	p = fork_idle(cpu);
@@ -359,7 +362,8 @@ static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 #if defined(CONFIG_SUN_LDOMS) && defined(CONFIG_HOTPLUG_CPU)
 		if (ldom_domaining_enabled)
 			ldom_startcpu_cpuid(cpu,
-					    (unsigned long) cpu_new_thread);
+					    (unsigned long) cpu_new_thread,
+					    &descr);
 		else
 #endif
 			prom_startcpu_cpuid(cpu, entry, cookie);
@@ -383,10 +387,7 @@ static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 	}
 	cpu_new_thread = NULL;
 
-	if (tb->hdesc) {
-		kfree(tb->hdesc);
-		tb->hdesc = NULL;
-	}
+	kfree(descr);
 
 	return ret;
 }
@@ -1315,6 +1316,8 @@ int __cpu_disable(void)
 	cpu_clear(cpu, cpu_online_map);
 	ipi_call_unlock();
 
+	cpu_map_rebuild();
+
 	return 0;
 }
 
@@ -1373,36 +1376,171 @@ void smp_send_stop(void)
 {
 }
 
-unsigned long __per_cpu_base __read_mostly;
-unsigned long __per_cpu_shift __read_mostly;
+/**
+ * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
+ * @cpu: cpu to allocate for
+ * @size: size allocation in bytes
+ * @align: alignment
+ *
+ * Allocate @size bytes aligned at @align for cpu @cpu.  This wrapper
+ * does the right thing for NUMA regardless of the current
+ * configuration.
+ *
+ * RETURNS:
+ * Pointer to the allocated area on success, NULL on failure.
+ */
+static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
+					unsigned long align)
+{
+	const unsigned long goal = __pa(MAX_DMA_ADDRESS);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	int node = cpu_to_node(cpu);
+	void *ptr;
+
+	if (!node_online(node) || !NODE_DATA(node)) {
+		ptr = __alloc_bootmem(size, align, goal);
+		pr_info("cpu %d has no node %d or node-local memory\n",
+			cpu, node);
+		pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n",
+			 cpu, size, __pa(ptr));
+	} else {
+		ptr = __alloc_bootmem_node(NODE_DATA(node),
+					   size, align, goal);
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
+			 "%016lx\n", cpu, size, node, __pa(ptr));
+	}
+	return ptr;
+#else
+	return __alloc_bootmem(size, align, goal);
+#endif
+}
 
-EXPORT_SYMBOL(__per_cpu_base);
-EXPORT_SYMBOL(__per_cpu_shift);
+static size_t pcpur_size __initdata;
+static void **pcpur_ptrs __initdata;
 
-void __init real_setup_per_cpu_areas(void)
+static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
 {
-	unsigned long paddr, goal, size, i;
-	char *ptr;
+	size_t off = (size_t)pageno << PAGE_SHIFT;
 
-	/* Copy section for each CPU (we discard the original) */
-	goal = PERCPU_ENOUGH_ROOM;
+	if (off >= pcpur_size)
+		return NULL;
 
-	__per_cpu_shift = PAGE_SHIFT;
-	for (size = PAGE_SIZE; size < goal; size <<= 1UL)
-		__per_cpu_shift++;
+	return virt_to_page(pcpur_ptrs[cpu] + off);
+}
+
+#define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL)
+
+static void __init pcpu_map_range(unsigned long start, unsigned long end,
+				  struct page *page)
+{
+	unsigned long pfn = page_to_pfn(page);
+	unsigned long pte_base;
+
+	BUG_ON((pfn<<PAGE_SHIFT)&(PCPU_CHUNK_SIZE - 1UL));
+
+	pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4U |
+		    _PAGE_CP_4U | _PAGE_CV_4U |
+		    _PAGE_P_4U | _PAGE_W_4U);
+	if (tlb_type == hypervisor)
+		pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4V |
+			    _PAGE_CP_4V | _PAGE_CV_4V |
+			    _PAGE_P_4V | _PAGE_W_4V);
+
+	while (start < end) {
+		pgd_t *pgd = pgd_offset_k(start);
+		unsigned long this_end;
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *pte;
+
+		pud = pud_offset(pgd, start);
+		if (pud_none(*pud)) {
+			pmd_t *new;
+
+			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+			pud_populate(&init_mm, pud, new);
+		}
+
+		pmd = pmd_offset(pud, start);
+		if (!pmd_present(*pmd)) {
+			pte_t *new;
+
+			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+			pmd_populate_kernel(&init_mm, pmd, new);
+		}
 
-	paddr = lmb_alloc(size * NR_CPUS, PAGE_SIZE);
-	if (!paddr) {
-		prom_printf("Cannot allocate per-cpu memory.\n");
-		prom_halt();
+		pte = pte_offset_kernel(pmd, start);
+		this_end = (start + PMD_SIZE) & PMD_MASK;
+		if (this_end > end)
+			this_end = end;
+
+		while (start < this_end) {
+			unsigned long paddr = pfn << PAGE_SHIFT;
+
+			pte_val(*pte) = (paddr | pte_base);
+
+			start += PAGE_SIZE;
+			pte++;
+			pfn++;
+		}
+	}
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start;
+	static struct vm_struct vm;
+	unsigned long delta, cpu;
+	size_t pcpu_unit_size;
+	size_t ptrs_size;
+
+	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+			       PERCPU_DYNAMIC_RESERVE);
+	dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
+
+
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+	pcpur_ptrs = alloc_bootmem(ptrs_size);
+
+	for_each_possible_cpu(cpu) {
+		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
+						     PCPU_CHUNK_SIZE);
+
+		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
+			     PCPU_CHUNK_SIZE - pcpur_size);
+
+		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
 	}
 
-	ptr = __va(paddr);
-	__per_cpu_base = ptr - __per_cpu_start;
+	/* allocate address and map */
+	vm.flags = VM_ALLOC;
+	vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE;
+	vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
+
+	for_each_possible_cpu(cpu) {
+		unsigned long start = (unsigned long) vm.addr;
+		unsigned long end;
+
+		start += cpu * PCPU_CHUNK_SIZE;
+		end = start + PCPU_CHUNK_SIZE;
+		pcpu_map_range(start, end, virt_to_page(pcpur_ptrs[cpu]));
+	}
 
-	for (i = 0; i < NR_CPUS; i++, ptr += size)
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+	pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+						PERCPU_MODULE_RESERVE, dyn_size,
+						PCPU_CHUNK_SIZE, vm.addr, NULL);
+
+	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu) {
+		__per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
+	}
 
 	/* Setup %g5 for the boot cpu.  */
 	__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
+
+	of_fill_in_cpu_data();
+	if (tlb_type == hypervisor)
+		mdesc_fill_in_cpu_data(cpu_all_mask);
 }
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 00ec3b15f38..69090165729 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -81,4 +81,6 @@ sys_call_table:
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo
+
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 82b5bf85b9d..6b3ee88e253 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -82,7 +82,8 @@ sys_call_table32:
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo
 
 #endif /* CONFIG_COMPAT */
 
@@ -156,4 +157,5 @@ sys_call_table:
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
+	.word sys_pwritev, sys_rt_tgsigqueueinfo
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index d809c4ebb48..10f7bb9fc14 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -2509,6 +2509,7 @@ void do_getpsr(struct pt_regs *regs)
 }
 
 struct trap_per_cpu trap_block[NR_CPUS];
+EXPORT_SYMBOL(trap_block);
 
 /* This can get invoked before sched_init() so play it super safe
  * and use hard_smp_processor_id().
@@ -2530,84 +2531,97 @@ extern void tsb_config_offsets_are_bolixed_dave(void);
 void __init trap_init(void)
 {
 	/* Compile time sanity check. */
-	if (TI_TASK != offsetof(struct thread_info, task) ||
-	    TI_FLAGS != offsetof(struct thread_info, flags) ||
-	    TI_CPU != offsetof(struct thread_info, cpu) ||
-	    TI_FPSAVED != offsetof(struct thread_info, fpsaved) ||
-	    TI_KSP != offsetof(struct thread_info, ksp) ||
-	    TI_FAULT_ADDR != offsetof(struct thread_info, fault_address) ||
-	    TI_KREGS != offsetof(struct thread_info, kregs) ||
-	    TI_UTRAPS != offsetof(struct thread_info, utraps) ||
-	    TI_EXEC_DOMAIN != offsetof(struct thread_info, exec_domain) ||
-	    TI_REG_WINDOW != offsetof(struct thread_info, reg_window) ||
-	    TI_RWIN_SPTRS != offsetof(struct thread_info, rwbuf_stkptrs) ||
-	    TI_GSR != offsetof(struct thread_info, gsr) ||
-	    TI_XFSR != offsetof(struct thread_info, xfsr) ||
-	    TI_USER_CNTD0 != offsetof(struct thread_info, user_cntd0) ||
-	    TI_USER_CNTD1 != offsetof(struct thread_info, user_cntd1) ||
-	    TI_KERN_CNTD0 != offsetof(struct thread_info, kernel_cntd0) ||
-	    TI_KERN_CNTD1 != offsetof(struct thread_info, kernel_cntd1) ||
-	    TI_PCR != offsetof(struct thread_info, pcr_reg) ||
-	    TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) ||
-	    TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
-	    TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) ||
-	    TI_RESTART_BLOCK != offsetof(struct thread_info, restart_block) ||
-	    TI_KUNA_REGS != offsetof(struct thread_info, kern_una_regs) ||
-	    TI_KUNA_INSN != offsetof(struct thread_info, kern_una_insn) ||
-	    TI_FPREGS != offsetof(struct thread_info, fpregs) ||
-	    (TI_FPREGS & (64 - 1)))
-		thread_info_offsets_are_bolixed_dave();
-
-	if (TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu, thread) ||
-	    (TRAP_PER_CPU_PGD_PADDR !=
-	     offsetof(struct trap_per_cpu, pgd_paddr)) ||
-	    (TRAP_PER_CPU_CPU_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, cpu_mondo_pa)) ||
-	    (TRAP_PER_CPU_DEV_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, dev_mondo_pa)) ||
-	    (TRAP_PER_CPU_RESUM_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, resum_mondo_pa)) ||
-	    (TRAP_PER_CPU_RESUM_KBUF_PA !=
-	     offsetof(struct trap_per_cpu, resum_kernel_buf_pa)) ||
-	    (TRAP_PER_CPU_NONRESUM_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, nonresum_mondo_pa)) ||
-	    (TRAP_PER_CPU_NONRESUM_KBUF_PA !=
-	     offsetof(struct trap_per_cpu, nonresum_kernel_buf_pa)) ||
-	    (TRAP_PER_CPU_FAULT_INFO !=
-	     offsetof(struct trap_per_cpu, fault_info)) ||
-	    (TRAP_PER_CPU_CPU_MONDO_BLOCK_PA !=
-	     offsetof(struct trap_per_cpu, cpu_mondo_block_pa)) ||
-	    (TRAP_PER_CPU_CPU_LIST_PA !=
-	     offsetof(struct trap_per_cpu, cpu_list_pa)) ||
-	    (TRAP_PER_CPU_TSB_HUGE !=
-	     offsetof(struct trap_per_cpu, tsb_huge)) ||
-	    (TRAP_PER_CPU_TSB_HUGE_TEMP !=
-	     offsetof(struct trap_per_cpu, tsb_huge_temp)) ||
-	    (TRAP_PER_CPU_IRQ_WORKLIST_PA !=
-	     offsetof(struct trap_per_cpu, irq_worklist_pa)) ||
-	    (TRAP_PER_CPU_CPU_MONDO_QMASK !=
-	     offsetof(struct trap_per_cpu, cpu_mondo_qmask)) ||
-	    (TRAP_PER_CPU_DEV_MONDO_QMASK !=
-	     offsetof(struct trap_per_cpu, dev_mondo_qmask)) ||
-	    (TRAP_PER_CPU_RESUM_QMASK !=
-	     offsetof(struct trap_per_cpu, resum_qmask)) ||
-	    (TRAP_PER_CPU_NONRESUM_QMASK !=
-	     offsetof(struct trap_per_cpu, nonresum_qmask)))
-		trap_per_cpu_offsets_are_bolixed_dave();
-
-	if ((TSB_CONFIG_TSB !=
-	     offsetof(struct tsb_config, tsb)) ||
-	    (TSB_CONFIG_RSS_LIMIT !=
-	     offsetof(struct tsb_config, tsb_rss_limit)) ||
-	    (TSB_CONFIG_NENTRIES !=
-	     offsetof(struct tsb_config, tsb_nentries)) ||
-	    (TSB_CONFIG_REG_VAL !=
-	     offsetof(struct tsb_config, tsb_reg_val)) ||
-	    (TSB_CONFIG_MAP_VADDR !=
-	     offsetof(struct tsb_config, tsb_map_vaddr)) ||
-	    (TSB_CONFIG_MAP_PTE !=
-	     offsetof(struct tsb_config, tsb_map_pte)))
-		tsb_config_offsets_are_bolixed_dave();
+	BUILD_BUG_ON(TI_TASK != offsetof(struct thread_info, task) ||
+		     TI_FLAGS != offsetof(struct thread_info, flags) ||
+		     TI_CPU != offsetof(struct thread_info, cpu) ||
+		     TI_FPSAVED != offsetof(struct thread_info, fpsaved) ||
+		     TI_KSP != offsetof(struct thread_info, ksp) ||
+		     TI_FAULT_ADDR != offsetof(struct thread_info,
+					       fault_address) ||
+		     TI_KREGS != offsetof(struct thread_info, kregs) ||
+		     TI_UTRAPS != offsetof(struct thread_info, utraps) ||
+		     TI_EXEC_DOMAIN != offsetof(struct thread_info,
+						exec_domain) ||
+		     TI_REG_WINDOW != offsetof(struct thread_info,
+					       reg_window) ||
+		     TI_RWIN_SPTRS != offsetof(struct thread_info,
+					       rwbuf_stkptrs) ||
+		     TI_GSR != offsetof(struct thread_info, gsr) ||
+		     TI_XFSR != offsetof(struct thread_info, xfsr) ||
+		     TI_USER_CNTD0 != offsetof(struct thread_info,
+					       user_cntd0) ||
+		     TI_USER_CNTD1 != offsetof(struct thread_info,
+					       user_cntd1) ||
+		     TI_KERN_CNTD0 != offsetof(struct thread_info,
+					       kernel_cntd0) ||
+		     TI_KERN_CNTD1 != offsetof(struct thread_info,
+					       kernel_cntd1) ||
+		     TI_PCR != offsetof(struct thread_info, pcr_reg) ||
+		     TI_PRE_COUNT != offsetof(struct thread_info,
+					      preempt_count) ||
+		     TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
+		     TI_SYS_NOERROR != offsetof(struct thread_info,
+						syscall_noerror) ||
+		     TI_RESTART_BLOCK != offsetof(struct thread_info,
+						  restart_block) ||
+		     TI_KUNA_REGS != offsetof(struct thread_info,
+					      kern_una_regs) ||
+		     TI_KUNA_INSN != offsetof(struct thread_info,
+					      kern_una_insn) ||
+		     TI_FPREGS != offsetof(struct thread_info, fpregs) ||
+		     (TI_FPREGS & (64 - 1)));
+
+	BUILD_BUG_ON(TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu,
+						     thread) ||
+		     (TRAP_PER_CPU_PGD_PADDR !=
+		      offsetof(struct trap_per_cpu, pgd_paddr)) ||
+		     (TRAP_PER_CPU_CPU_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, cpu_mondo_pa)) ||
+		     (TRAP_PER_CPU_DEV_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, dev_mondo_pa)) ||
+		     (TRAP_PER_CPU_RESUM_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, resum_mondo_pa)) ||
+		     (TRAP_PER_CPU_RESUM_KBUF_PA !=
+		      offsetof(struct trap_per_cpu, resum_kernel_buf_pa)) ||
+		     (TRAP_PER_CPU_NONRESUM_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, nonresum_mondo_pa)) ||
+		     (TRAP_PER_CPU_NONRESUM_KBUF_PA !=
+		      offsetof(struct trap_per_cpu, nonresum_kernel_buf_pa)) ||
+		     (TRAP_PER_CPU_FAULT_INFO !=
+		      offsetof(struct trap_per_cpu, fault_info)) ||
+		     (TRAP_PER_CPU_CPU_MONDO_BLOCK_PA !=
+		      offsetof(struct trap_per_cpu, cpu_mondo_block_pa)) ||
+		     (TRAP_PER_CPU_CPU_LIST_PA !=
+		      offsetof(struct trap_per_cpu, cpu_list_pa)) ||
+		     (TRAP_PER_CPU_TSB_HUGE !=
+		      offsetof(struct trap_per_cpu, tsb_huge)) ||
+		     (TRAP_PER_CPU_TSB_HUGE_TEMP !=
+		      offsetof(struct trap_per_cpu, tsb_huge_temp)) ||
+		     (TRAP_PER_CPU_IRQ_WORKLIST_PA !=
+		      offsetof(struct trap_per_cpu, irq_worklist_pa)) ||
+		     (TRAP_PER_CPU_CPU_MONDO_QMASK !=
+		      offsetof(struct trap_per_cpu, cpu_mondo_qmask)) ||
+		     (TRAP_PER_CPU_DEV_MONDO_QMASK !=
+		      offsetof(struct trap_per_cpu, dev_mondo_qmask)) ||
+		     (TRAP_PER_CPU_RESUM_QMASK !=
+		      offsetof(struct trap_per_cpu, resum_qmask)) ||
+		     (TRAP_PER_CPU_NONRESUM_QMASK !=
+		      offsetof(struct trap_per_cpu, nonresum_qmask)) ||
+		     (TRAP_PER_CPU_PER_CPU_BASE !=
+		      offsetof(struct trap_per_cpu, __per_cpu_base)));
+
+	BUILD_BUG_ON((TSB_CONFIG_TSB !=
+		      offsetof(struct tsb_config, tsb)) ||
+		     (TSB_CONFIG_RSS_LIMIT !=
+		      offsetof(struct tsb_config, tsb_rss_limit)) ||
+		     (TSB_CONFIG_NENTRIES !=
+		      offsetof(struct tsb_config, tsb_nentries)) ||
+		     (TSB_CONFIG_REG_VAL !=
+		      offsetof(struct tsb_config, tsb_reg_val)) ||
+		     (TSB_CONFIG_MAP_VADDR !=
+		      offsetof(struct tsb_config, tsb_map_vaddr)) ||
+		     (TSB_CONFIG_MAP_PTE !=
+		      offsetof(struct tsb_config, tsb_map_pte)));
 
 	/* Attach to the address space of init_task.  On SMP we
 	 * do this in smp.c:smp_callin for other cpus.
diff --git a/arch/sparc/mm/extable.c b/arch/sparc/mm/extable.c
index 16cc28935e3..a61c349448e 100644
--- a/arch/sparc/mm/extable.c
+++ b/arch/sparc/mm/extable.c
@@ -28,6 +28,10 @@ search_extable(const struct exception_table_entry *start,
 	 *	word 3: last insn address + 4 bytes
 	 *	word 4: fixup code address
 	 *
+	 * Deleted entries are encoded as:
+	 *	word 1: unused
+	 *	word 2: -1
+	 *
 	 * See asm/uaccess.h for more details.
 	 */
 
@@ -39,6 +43,10 @@ search_extable(const struct exception_table_entry *start,
 			continue;
 		}
 
+		/* A deleted entry; see trim_init_extable */
+		if (walk->fixup == -1)
+			continue;
+
 		if (walk->insn == value)
 			return walk;
 	}
@@ -57,6 +65,27 @@ search_extable(const struct exception_table_entry *start,
         return NULL;
 }
 
+#ifdef CONFIG_MODULES
+/* We could memmove them around; easier to mark the trimmed ones. */
+void trim_init_extable(struct module *m)
+{
+	unsigned int i;
+	bool range;
+
+	for (i = 0; i < m->num_exentries; i += range ? 2 : 1) {
+		range = m->extable[i].fixup == 0;
+
+		if (within_module_init(m->extable[i].insn, m)) {
+			m->extable[i].fixup = -1;
+			if (range)
+				m->extable[i+1].fixup = -1;
+		}
+		if (range)
+			i++;
+	}
+}
+#endif /* CONFIG_MODULES */
+
 /* Special extable search, which handles ranges.  Returns fixup */
 unsigned long search_extables_range(unsigned long addr, unsigned long *g2)
 {
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index cbb282dab5a..26bb3919ff1 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -358,6 +358,7 @@ void __init paging_init(void)
 	protection_map[15] = PAGE_SHARED;
 	btfixup();
 	prom_build_devicetree();
+	of_fill_in_cpu_data();
 	device_scan();
 }
 
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index f26a352c08a..ca92e2f54e4 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1679,11 +1679,6 @@ pgd_t swapper_pg_dir[2048];
 static void sun4u_pgprot_init(void);
 static void sun4v_pgprot_init(void);
 
-/* Dummy function */
-void __init setup_per_cpu_areas(void)
-{
-}
-
 void __init paging_init(void)
 {
 	unsigned long end_pfn, shift, phys_base;
@@ -1799,16 +1794,13 @@ void __init paging_init(void)
 	if (tlb_type == hypervisor)
 		sun4v_ktsb_register();
 
-	/* We must setup the per-cpu areas before we pull in the
-	 * PROM and the MDESC.  The code there fills in cpu and
-	 * other information into per-cpu data structures.
-	 */
-	real_setup_per_cpu_areas();
-
 	prom_build_devicetree();
+	of_populate_present_mask();
 
-	if (tlb_type == hypervisor)
+	if (tlb_type == hypervisor) {
 		sun4v_mdesc_init();
+		mdesc_populate_present_mask(cpu_all_mask);
+	}
 
 	/* Once the OF device tree and MDESC have been setup, we know
 	 * the list of possible cpus.  Therefore we can allocate the
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 06c9a7d9820..ade4eb373bd 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -19,6 +19,7 @@
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/kdebug.h>
+#include <linux/log2.h>
 
 #include <asm/bitext.h>
 #include <asm/page.h>
@@ -349,7 +350,7 @@ static void srmmu_free_nocache(unsigned long vaddr, int size)
 		    vaddr, srmmu_nocache_end);
 		BUG();
 	}
-	if (size & (size-1)) {
+	if (!is_power_of_2(size)) {
 		printk("Size 0x%x is not a power of 2\n", size);
 		BUG();
 	}
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
index 55f28a0bae6..4cc9b6cf480 100644
--- a/arch/um/include/asm/page.h
+++ b/arch/um/include/asm/page.h
@@ -116,7 +116,7 @@ extern unsigned long uml_physmem;
 #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif	/* __ASSEMBLY__ */
 #endif	/* __UM_PAGE_H */
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 58da2480a7f..9ce3f165111 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -53,16 +53,21 @@ extern unsigned long end_iomem;
 #else
 # define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
 #endif
+#define MODULES_VADDR	VMALLOC_START
+#define MODULES_END	VMALLOC_END
+#define MODULES_LEN	(MODULES_VADDR - MODULES_END)
 
 #define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
+#define __PAGE_KERNEL_EXEC                                              \
+	 (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
 #define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define PAGE_KERNEL_EXEC	__pgprot(__PAGE_KERNEL_EXEC)
 
 /*
  * The i386 can't do page protection for execute, and considers that the same
diff --git a/arch/um/include/asm/suspend.h b/arch/um/include/asm/suspend.h
deleted file mode 100644
index f4e8e007f46..00000000000
--- a/arch/um/include/asm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __UM_SUSPEND_H
-#define __UM_SUSPEND_H
-
-#endif
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 598b5c1903a..1b549bca464 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -8,7 +8,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 
 subarch-obj-y = lib/semaphore_32.o lib/string_32.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module_32.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 USER_OBJS := bugs.o ptrace_user.o fault.o
 
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index c8b4cce9cfe..2201e9c20e4 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -8,10 +8,8 @@ obj-y = bug.o bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
 	setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
 	sysrq.o ksyms.o tls.o
 
-obj-$(CONFIG_MODULES) += um_module.o
-
 subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module_64.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 ldt-y = ../sys-i386/ldt.o
 
diff --git a/arch/um/sys-x86_64/um_module.c b/arch/um/sys-x86_64/um_module.c
deleted file mode 100644
index 3dead392a41..00000000000
--- a/arch/um/sys-x86_64/um_module.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-
-/* Copied from i386 arch/i386/kernel/module.c */
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc_exec(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/*
-	 * FIXME: If module_region == mod->init_region, trim exception
-	 * table entries.
-	 */
-}
-
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 68f5578fe38..356d2ec8e2f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -789,10 +789,26 @@ config X86_MCE
 	  to disable it.  MCE support simply ignores non-MCE processors like
 	  the 386 and 486, so nearly everyone can say Y here.
 
+config X86_OLD_MCE
+	depends on X86_32 && X86_MCE
+	bool "Use legacy machine check code (will go away)"
+	default n
+	select X86_ANCIENT_MCE
+	---help---
+	  Use the old i386 machine check code. This is merely intended for
+	  testing in a transition period. Try this if you run into any machine
+	  check related software problems, but report the problem to
+	  linux-kernel.  When in doubt say no.
+
+config X86_NEW_MCE
+	depends on X86_MCE
+	bool
+	default y if (!X86_OLD_MCE && X86_32) || X86_64
+
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	depends on X86_NEW_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -800,19 +816,36 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	depends on X86_NEW_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
+config X86_ANCIENT_MCE
+	def_bool n
+	depends on X86_32
+	prompt "Support for old Pentium 5 / WinChip machine checks"
+	---help---
+	  Include support for machine check handling on old Pentium 5 or WinChip
+	  systems. These typically need to be enabled explicitely on the command
+	  line.
+
 config X86_MCE_THRESHOLD
 	depends on X86_MCE_AMD || X86_MCE_INTEL
 	bool
 	default y
 
+config X86_MCE_INJECT
+	depends on X86_NEW_MCE
+	tristate "Machine check injector support"
+	---help---
+	  Provide support for injecting machine checks for testing purposes.
+	  If you don't know what a machine check is and you don't do kernel
+	  QA it is safe to say n.
+
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_32 && X86_MCE
+	depends on X86_OLD_MCE
 	---help---
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
@@ -825,11 +858,15 @@ config X86_MCE_NONFATAL
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
+	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
 	---help---
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
 
+config X86_THERMAL_VECTOR
+	def_bool y
+	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
 	default y
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index ebe7deedd5b..cfb0010fa94 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -2,6 +2,8 @@
 # Arch-specific CryptoAPI modules.
 #
 
+obj-$(CONFIG_CRYPTO_FPU) += fpu.o
+
 obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
 obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
 obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 02af0af6549..4e663398f77 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -21,6 +21,22 @@
 #include <asm/i387.h>
 #include <asm/aes.h>
 
+#if defined(CONFIG_CRYPTO_CTR) || defined(CONFIG_CRYPTO_CTR_MODULE)
+#define HAS_CTR
+#endif
+
+#if defined(CONFIG_CRYPTO_LRW) || defined(CONFIG_CRYPTO_LRW_MODULE)
+#define HAS_LRW
+#endif
+
+#if defined(CONFIG_CRYPTO_PCBC) || defined(CONFIG_CRYPTO_PCBC_MODULE)
+#define HAS_PCBC
+#endif
+
+#if defined(CONFIG_CRYPTO_XTS) || defined(CONFIG_CRYPTO_XTS_MODULE)
+#define HAS_XTS
+#endif
+
 struct async_aes_ctx {
 	struct cryptd_ablkcipher *cryptd_tfm;
 };
@@ -137,6 +153,41 @@ static struct crypto_alg aesni_alg = {
 	}
 };
 
+static void __aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+	aesni_enc(ctx, dst, src);
+}
+
+static void __aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+	aesni_dec(ctx, dst, src);
+}
+
+static struct crypto_alg __aesni_alg = {
+	.cra_name		= "__aes-aesni",
+	.cra_driver_name	= "__driver-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+	.cra_alignmask		= 0,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(__aesni_alg.cra_list),
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= AES_MIN_KEY_SIZE,
+			.cia_max_keysize	= AES_MAX_KEY_SIZE,
+			.cia_setkey		= aes_set_key,
+			.cia_encrypt		= __aes_encrypt,
+			.cia_decrypt		= __aes_decrypt
+		}
+	}
+};
+
 static int ecb_encrypt(struct blkcipher_desc *desc,
 		       struct scatterlist *dst, struct scatterlist *src,
 		       unsigned int nbytes)
@@ -277,8 +328,16 @@ static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
 			unsigned int key_len)
 {
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+	struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base;
+	int err;
 
-	return crypto_ablkcipher_setkey(&ctx->cryptd_tfm->base, key, key_len);
+	crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+	crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm)
+				    & CRYPTO_TFM_REQ_MASK);
+	err = crypto_ablkcipher_setkey(child, key, key_len);
+	crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child)
+				    & CRYPTO_TFM_RES_MASK);
+	return err;
 }
 
 static int ablk_encrypt(struct ablkcipher_request *req)
@@ -411,6 +470,163 @@ static struct crypto_alg ablk_cbc_alg = {
 	},
 };
 
+#ifdef HAS_CTR
+static int ablk_ctr_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(ctr(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_ctr_alg = {
+	.cra_name		= "ctr(aes)",
+	.cra_driver_name	= "ctr-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_ctr_alg.cra_list),
+	.cra_init		= ablk_ctr_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+			.geniv		= "chainiv",
+		},
+	},
+};
+#endif
+
+#ifdef HAS_LRW
+static int ablk_lrw_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(lrw(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_lrw_alg = {
+	.cra_name		= "lrw(aes)",
+	.cra_driver_name	= "lrw-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_lrw_alg.cra_list),
+	.cra_init		= ablk_lrw_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE + AES_BLOCK_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE + AES_BLOCK_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+#endif
+
+#ifdef HAS_PCBC
+static int ablk_pcbc_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(pcbc(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_pcbc_alg = {
+	.cra_name		= "pcbc(aes)",
+	.cra_driver_name	= "pcbc-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_pcbc_alg.cra_list),
+	.cra_init		= ablk_pcbc_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+#endif
+
+#ifdef HAS_XTS
+static int ablk_xts_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(xts(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_xts_alg = {
+	.cra_name		= "xts(aes)",
+	.cra_driver_name	= "xts-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_xts_alg.cra_list),
+	.cra_init		= ablk_xts_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+			.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+#endif
+
 static int __init aesni_init(void)
 {
 	int err;
@@ -421,6 +637,8 @@ static int __init aesni_init(void)
 	}
 	if ((err = crypto_register_alg(&aesni_alg)))
 		goto aes_err;
+	if ((err = crypto_register_alg(&__aesni_alg)))
+		goto __aes_err;
 	if ((err = crypto_register_alg(&blk_ecb_alg)))
 		goto blk_ecb_err;
 	if ((err = crypto_register_alg(&blk_cbc_alg)))
@@ -429,9 +647,41 @@ static int __init aesni_init(void)
 		goto ablk_ecb_err;
 	if ((err = crypto_register_alg(&ablk_cbc_alg)))
 		goto ablk_cbc_err;
+#ifdef HAS_CTR
+	if ((err = crypto_register_alg(&ablk_ctr_alg)))
+		goto ablk_ctr_err;
+#endif
+#ifdef HAS_LRW
+	if ((err = crypto_register_alg(&ablk_lrw_alg)))
+		goto ablk_lrw_err;
+#endif
+#ifdef HAS_PCBC
+	if ((err = crypto_register_alg(&ablk_pcbc_alg)))
+		goto ablk_pcbc_err;
+#endif
+#ifdef HAS_XTS
+	if ((err = crypto_register_alg(&ablk_xts_alg)))
+		goto ablk_xts_err;
+#endif
 
 	return err;
 
+#ifdef HAS_XTS
+ablk_xts_err:
+#endif
+#ifdef HAS_PCBC
+	crypto_unregister_alg(&ablk_pcbc_alg);
+ablk_pcbc_err:
+#endif
+#ifdef HAS_LRW
+	crypto_unregister_alg(&ablk_lrw_alg);
+ablk_lrw_err:
+#endif
+#ifdef HAS_CTR
+	crypto_unregister_alg(&ablk_ctr_alg);
+ablk_ctr_err:
+#endif
+	crypto_unregister_alg(&ablk_cbc_alg);
 ablk_cbc_err:
 	crypto_unregister_alg(&ablk_ecb_alg);
 ablk_ecb_err:
@@ -439,6 +689,8 @@ ablk_ecb_err:
 blk_cbc_err:
 	crypto_unregister_alg(&blk_ecb_alg);
 blk_ecb_err:
+	crypto_unregister_alg(&__aesni_alg);
+__aes_err:
 	crypto_unregister_alg(&aesni_alg);
 aes_err:
 	return err;
@@ -446,10 +698,23 @@ aes_err:
 
 static void __exit aesni_exit(void)
 {
+#ifdef HAS_XTS
+	crypto_unregister_alg(&ablk_xts_alg);
+#endif
+#ifdef HAS_PCBC
+	crypto_unregister_alg(&ablk_pcbc_alg);
+#endif
+#ifdef HAS_LRW
+	crypto_unregister_alg(&ablk_lrw_alg);
+#endif
+#ifdef HAS_CTR
+	crypto_unregister_alg(&ablk_ctr_alg);
+#endif
 	crypto_unregister_alg(&ablk_cbc_alg);
 	crypto_unregister_alg(&ablk_ecb_alg);
 	crypto_unregister_alg(&blk_cbc_alg);
 	crypto_unregister_alg(&blk_ecb_alg);
+	crypto_unregister_alg(&__aesni_alg);
 	crypto_unregister_alg(&aesni_alg);
 }
 
diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
new file mode 100644
index 00000000000..5f9781a3815
--- /dev/null
+++ b/arch/x86/crypto/fpu.c
@@ -0,0 +1,166 @@
+/*
+ * FPU: Wrapper for blkcipher touching fpu
+ *
+ * Copyright (c) Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <crypto/algapi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/i387.h>
+
+struct crypto_fpu_ctx {
+	struct crypto_blkcipher *child;
+};
+
+static int crypto_fpu_setkey(struct crypto_tfm *parent, const u8 *key,
+			     unsigned int keylen)
+{
+	struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(parent);
+	struct crypto_blkcipher *child = ctx->child;
+	int err;
+
+	crypto_blkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+	crypto_blkcipher_set_flags(child, crypto_tfm_get_flags(parent) &
+				   CRYPTO_TFM_REQ_MASK);
+	err = crypto_blkcipher_setkey(child, key, keylen);
+	crypto_tfm_set_flags(parent, crypto_blkcipher_get_flags(child) &
+				     CRYPTO_TFM_RES_MASK);
+	return err;
+}
+
+static int crypto_fpu_encrypt(struct blkcipher_desc *desc_in,
+			      struct scatterlist *dst, struct scatterlist *src,
+			      unsigned int nbytes)
+{
+	int err;
+	struct crypto_fpu_ctx *ctx = crypto_blkcipher_ctx(desc_in->tfm);
+	struct crypto_blkcipher *child = ctx->child;
+	struct blkcipher_desc desc = {
+		.tfm = child,
+		.info = desc_in->info,
+		.flags = desc_in->flags,
+	};
+
+	kernel_fpu_begin();
+	err = crypto_blkcipher_crt(desc.tfm)->encrypt(&desc, dst, src, nbytes);
+	kernel_fpu_end();
+	return err;
+}
+
+static int crypto_fpu_decrypt(struct blkcipher_desc *desc_in,
+			      struct scatterlist *dst, struct scatterlist *src,
+			      unsigned int nbytes)
+{
+	int err;
+	struct crypto_fpu_ctx *ctx = crypto_blkcipher_ctx(desc_in->tfm);
+	struct crypto_blkcipher *child = ctx->child;
+	struct blkcipher_desc desc = {
+		.tfm = child,
+		.info = desc_in->info,
+		.flags = desc_in->flags,
+	};
+
+	kernel_fpu_begin();
+	err = crypto_blkcipher_crt(desc.tfm)->decrypt(&desc, dst, src, nbytes);
+	kernel_fpu_end();
+	return err;
+}
+
+static int crypto_fpu_init_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
+	struct crypto_spawn *spawn = crypto_instance_ctx(inst);
+	struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_blkcipher *cipher;
+
+	cipher = crypto_spawn_blkcipher(spawn);
+	if (IS_ERR(cipher))
+		return PTR_ERR(cipher);
+
+	ctx->child = cipher;
+	return 0;
+}
+
+static void crypto_fpu_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(tfm);
+	crypto_free_blkcipher(ctx->child);
+}
+
+static struct crypto_instance *crypto_fpu_alloc(struct rtattr **tb)
+{
+	struct crypto_instance *inst;
+	struct crypto_alg *alg;
+	int err;
+
+	err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER);
+	if (err)
+		return ERR_PTR(err);
+
+	alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_BLKCIPHER,
+				  CRYPTO_ALG_TYPE_MASK);
+	if (IS_ERR(alg))
+		return ERR_CAST(alg);
+
+	inst = crypto_alloc_instance("fpu", alg);
+	if (IS_ERR(inst))
+		goto out_put_alg;
+
+	inst->alg.cra_flags = alg->cra_flags;
+	inst->alg.cra_priority = alg->cra_priority;
+	inst->alg.cra_blocksize = alg->cra_blocksize;
+	inst->alg.cra_alignmask = alg->cra_alignmask;
+	inst->alg.cra_type = alg->cra_type;
+	inst->alg.cra_blkcipher.ivsize = alg->cra_blkcipher.ivsize;
+	inst->alg.cra_blkcipher.min_keysize = alg->cra_blkcipher.min_keysize;
+	inst->alg.cra_blkcipher.max_keysize = alg->cra_blkcipher.max_keysize;
+	inst->alg.cra_ctxsize = sizeof(struct crypto_fpu_ctx);
+	inst->alg.cra_init = crypto_fpu_init_tfm;
+	inst->alg.cra_exit = crypto_fpu_exit_tfm;
+	inst->alg.cra_blkcipher.setkey = crypto_fpu_setkey;
+	inst->alg.cra_blkcipher.encrypt = crypto_fpu_encrypt;
+	inst->alg.cra_blkcipher.decrypt = crypto_fpu_decrypt;
+
+out_put_alg:
+	crypto_mod_put(alg);
+	return inst;
+}
+
+static void crypto_fpu_free(struct crypto_instance *inst)
+{
+	crypto_drop_spawn(crypto_instance_ctx(inst));
+	kfree(inst);
+}
+
+static struct crypto_template crypto_fpu_tmpl = {
+	.name = "fpu",
+	.alloc = crypto_fpu_alloc,
+	.free = crypto_fpu_free,
+	.module = THIS_MODULE,
+};
+
+static int __init crypto_fpu_module_init(void)
+{
+	return crypto_register_template(&crypto_fpu_tmpl);
+}
+
+static void __exit crypto_fpu_module_exit(void)
+{
+	crypto_unregister_template(&crypto_fpu_tmpl);
+}
+
+module_init(crypto_fpu_module_init);
+module_exit(crypto_fpu_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FPU block cipher wrapper");
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index a6a4b357076..2503d4e64c2 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -482,5 +482,5 @@ atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
 	return old_val < 0;
 }
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 8c21731984d..0d636022000 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -455,5 +455,5 @@ static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_64_H */
diff --git a/arch/x86/include/asm/bitsperlong.h b/arch/x86/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..b0ae1c4dc79
--- /dev/null
+++ b/arch/x86/include/asm/bitsperlong.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_X86_BITSPERLONG_H
+#define __ASM_X86_BITSPERLONG_H
+
+#ifdef __x86_64__
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_X86_BITSPERLONG_H */
+
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index d750a10ccad..ff8cbfa0785 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -14,6 +14,7 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
 BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
 BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
 BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+BUILD_INTERRUPT(reboot_interrupt,REBOOT_VECTOR)
 
 BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
 		 smp_invalidate_interrupt)
@@ -52,8 +53,16 @@ BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
 BUILD_INTERRUPT(perf_pending_interrupt, LOCAL_PENDING_VECTOR)
 #endif
 
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_THERMAL_VECTOR
 BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
 #endif
 
+#ifdef CONFIG_X86_MCE_THRESHOLD
+BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
+#endif
+
+#ifdef CONFIG_X86_NEW_MCE
+BUILD_INTERRUPT(mce_self_interrupt,MCE_SELF_VECTOR)
+#endif
+
 #endif
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 9ebc5c25503..82e3e8f0104 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -22,7 +22,7 @@ typedef struct {
 #endif
 #ifdef CONFIG_X86_MCE
 	unsigned int irq_thermal_count;
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
 	unsigned int irq_threshold_count;
 # endif
 #endif
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 6df45f63966..ba180d93b08 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -34,6 +34,7 @@ extern void perf_pending_interrupt(void);
 extern void spurious_interrupt(void);
 extern void thermal_interrupt(void);
 extern void reschedule_interrupt(void);
+extern void mce_self_interrupt(void);
 
 extern void invalidate_interrupt(void);
 extern void invalidate_interrupt0(void);
@@ -46,6 +47,7 @@ extern void invalidate_interrupt6(void);
 extern void invalidate_interrupt7(void);
 
 extern void irq_move_cleanup_interrupt(void);
+extern void reboot_interrupt(void);
 extern void threshold_interrupt(void);
 
 extern void call_function_interrupt(void);
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index e997be98c9b..5b21f0ec3df 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -25,6 +25,7 @@
  */
 
 #define NMI_VECTOR			0x02
+#define MCE_VECTOR			0x12
 
 /*
  * IDT vectors usable for external interrupt sources start
@@ -87,13 +88,8 @@
 #define CALL_FUNCTION_VECTOR		0xfc
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
-
-#ifdef CONFIG_X86_32
-/* 0xf8 - 0xf9 : free */
-#else
-# define THRESHOLD_APIC_VECTOR		0xf9
-# define UV_BAU_MESSAGE			0xf8
-#endif
+#define THRESHOLD_APIC_VECTOR		0xf9
+#define REBOOT_VECTOR			0xf8
 
 /* f0-f7 used for spreading out TLB flushes: */
 #define INVALIDATE_TLB_VECTOR_END	0xf7
@@ -117,6 +113,13 @@
  */
 #define LOCAL_PENDING_VECTOR		0xec
 
+#define UV_BAU_MESSAGE			0xec
+
+/*
+ * Self IPI vector for machine checks
+ */
+#define MCE_SELF_VECTOR			0xeb
+
 /*
  * First APIC vector available to drivers: (vectors 0x30-0xee) we
  * start at 0x31(0x41) to spread out vectors evenly between priority
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 1caf57628b9..313389cd50d 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,13 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M for ease of mapping into the guest (one PTE page). */
+/* We map at -4M (-2M when PAE is activated) for ease of mapping
+ * into the guest (one PTE page). */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_ADDR 0xFFE00000
+#else
 #define SWITCHER_ADDR 0xFFC00000
+#endif
 
 /* Found in switcher.S */
 extern unsigned long default_idt_entries[];
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index faae1996487..d31c4a68407 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -12,11 +12,13 @@
 #define LHCALL_TS		8
 #define LHCALL_SET_CLOCKEVENT	9
 #define LHCALL_HALT		10
+#define LHCALL_SET_PMD		13
 #define LHCALL_SET_PTE		14
-#define LHCALL_SET_PMD		15
+#define LHCALL_SET_PGD		15
 #define LHCALL_LOAD_TLS		16
 #define LHCALL_NOTIFY		17
 #define LHCALL_LOAD_GDT_ENTRY	18
+#define LHCALL_SEND_INTERRUPTS	19
 
 #define LGUEST_TRAP_ENTRY 0x1F
 
@@ -32,10 +34,10 @@
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Eighteen hypercalls are
+ * We use the KVM hypercall mechanism. Seventeen hypercalls are
  * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx and %edx.  If a return
- * value makes sense, it's returned in %eax.
+ * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
+ * If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
@@ -47,8 +49,9 @@
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
-	unsigned long arg0, arg1, arg2, arg3;
+	/* These map directly onto eax, ebx, ecx, edx and esi
+	 * in struct lguest_regs */
+	unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 4f8c199584e..540a466e50f 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_MCE_H
 #define _ASM_X86_MCE_H
 
-#ifdef __x86_64__
-
 #include <linux/types.h>
 #include <asm/ioctls.h>
 
@@ -10,21 +8,35 @@
  * Machine Check support for x86
  */
 
-#define MCG_CTL_P	 (1UL<<8)   /* MCG_CAP register available */
-#define MCG_EXT_P	 (1ULL<<9)   /* Extended registers available */
-#define MCG_CMCI_P	 (1ULL<<10)  /* CMCI supported */
-
-#define MCG_STATUS_RIPV  (1UL<<0)   /* restart ip valid */
-#define MCG_STATUS_EIPV  (1UL<<1)   /* ip points to correct instruction */
-#define MCG_STATUS_MCIP  (1UL<<2)   /* machine check in progress */
-
-#define MCI_STATUS_VAL   (1UL<<63)  /* valid error */
-#define MCI_STATUS_OVER  (1UL<<62)  /* previous errors lost */
-#define MCI_STATUS_UC    (1UL<<61)  /* uncorrected error */
-#define MCI_STATUS_EN    (1UL<<60)  /* error enabled */
-#define MCI_STATUS_MISCV (1UL<<59)  /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1UL<<58)  /* addr reg. valid */
-#define MCI_STATUS_PCC   (1UL<<57)  /* processor context corrupt */
+#define MCG_BANKCNT_MASK	0xff         /* Number of Banks */
+#define MCG_CTL_P		(1ULL<<8)    /* MCG_CAP register available */
+#define MCG_EXT_P		(1ULL<<9)    /* Extended registers available */
+#define MCG_CMCI_P		(1ULL<<10)   /* CMCI supported */
+#define MCG_EXT_CNT_MASK	0xff0000     /* Number of Extended registers */
+#define MCG_EXT_CNT_SHIFT	16
+#define MCG_EXT_CNT(c)		(((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
+#define MCG_SER_P	 	(1ULL<<24)   /* MCA recovery/new status bits */
+
+#define MCG_STATUS_RIPV  (1ULL<<0)   /* restart ip valid */
+#define MCG_STATUS_EIPV  (1ULL<<1)   /* ip points to correct instruction */
+#define MCG_STATUS_MCIP  (1ULL<<2)   /* machine check in progress */
+
+#define MCI_STATUS_VAL   (1ULL<<63)  /* valid error */
+#define MCI_STATUS_OVER  (1ULL<<62)  /* previous errors lost */
+#define MCI_STATUS_UC    (1ULL<<61)  /* uncorrected error */
+#define MCI_STATUS_EN    (1ULL<<60)  /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59)  /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58)  /* addr reg. valid */
+#define MCI_STATUS_PCC   (1ULL<<57)  /* processor context corrupt */
+#define MCI_STATUS_S	 (1ULL<<56)  /* Signaled machine check */
+#define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
+
+/* MISC register defines */
+#define MCM_ADDR_SEGOFF  0	/* segment offset */
+#define MCM_ADDR_LINEAR  1	/* linear address */
+#define MCM_ADDR_PHYS	 2	/* physical address */
+#define MCM_ADDR_MEM	 3	/* memory address */
+#define MCM_ADDR_GENERIC 7	/* generic */
 
 /* Fields are zero when not available */
 struct mce {
@@ -34,13 +46,19 @@ struct mce {
 	__u64 mcgstatus;
 	__u64 ip;
 	__u64 tsc;	/* cpu time stamp counter */
-	__u64 res1;	/* for future extension */
-	__u64 res2;	/* dito. */
+	__u64 time;	/* wall time_t when error was detected */
+	__u8  cpuvendor;	/* cpu vendor as encoded in system.h */
+	__u8  pad1;
+	__u16 pad2;
+	__u32 cpuid;	/* CPUID 1 EAX */
 	__u8  cs;		/* code segment */
 	__u8  bank;	/* machine check bank */
-	__u8  cpu;	/* cpu that raised the error */
+	__u8  cpu;	/* cpu number; obsolete; use extcpu now */
 	__u8  finished;   /* entry is valid */
-	__u32 pad;
+	__u32 extcpu;	/* linux cpu number that detected the error */
+	__u32 socketid;	/* CPU socket ID */
+	__u32 apicid;	/* CPU initial apic ID */
+	__u64 mcgcap;	/* MCGCAP MSR: machine check capabilities of CPU */
 };
 
 /*
@@ -57,7 +75,7 @@ struct mce_log {
 	unsigned len;	    /* = MCE_LOG_LEN */
 	unsigned next;
 	unsigned flags;
-	unsigned pad0;
+	unsigned recordlen;	/* length of struct mce */
 	struct mce entry[MCE_LOG_LEN];
 };
 
@@ -82,19 +100,16 @@ struct mce_log {
 #define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
 #define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
 
-#endif /* __x86_64__ */
-
 #ifdef __KERNEL__
 
-#ifdef CONFIG_X86_32
 extern int mce_disabled;
-#else /* CONFIG_X86_32 */
 
 #include <asm/atomic.h>
+#include <linux/percpu.h>
 
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
-DECLARE_PER_CPU(struct sys_device, device_mce);
+DECLARE_PER_CPU(struct sys_device, mce_dev);
 extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 /*
@@ -104,6 +119,8 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 #define MAX_NR_BANKS (MCE_EXTENDED_BANK - 1)
 
 #ifdef CONFIG_X86_MCE_INTEL
+extern int mce_cmci_disabled;
+extern int mce_ignore_ce;
 void mce_intel_feature_init(struct cpuinfo_x86 *c);
 void cmci_clear(void);
 void cmci_reenable(void);
@@ -123,13 +140,16 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c);
 static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
 #endif
 
-extern int mce_available(struct cpuinfo_x86 *c);
+int mce_available(struct cpuinfo_x86 *c);
+
+DECLARE_PER_CPU(unsigned, mce_exception_count);
+DECLARE_PER_CPU(unsigned, mce_poll_count);
 
 void mce_log_therm_throt_event(__u64 status);
 
 extern atomic_t mce_entry;
 
-extern void do_machine_check(struct pt_regs *, long);
+void do_machine_check(struct pt_regs *, long);
 
 typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS);
 DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
@@ -139,14 +159,16 @@ enum mcp_flags {
 	MCP_UC = (1 << 1),		/* log uncorrected errors */
 	MCP_DONTLOG = (1 << 2),		/* only clear, don't log */
 };
-extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
+void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
 
-extern int mce_notify_user(void);
+int mce_notify_irq(void);
+void mce_notify_process(void);
 
-#endif /* !CONFIG_X86_32 */
+DECLARE_PER_CPU(struct mce, injectm);
+extern struct file_operations mce_chrdev_ops;
 
 #ifdef CONFIG_X86_MCE
-extern void mcheck_init(struct cpuinfo_x86 *c);
+void mcheck_init(struct cpuinfo_x86 *c);
 #else
 #define mcheck_init(c) do { } while (0)
 #endif
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 90bc4108a4f..751af2550ed 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_X86_MMAN_H
 #define _ASM_X86_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 4d58d04fca8..1692fb5050e 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -207,7 +207,14 @@
 
 #define MSR_IA32_THERM_CONTROL		0x0000019a
 #define MSR_IA32_THERM_INTERRUPT	0x0000019b
+
+#define THERM_INT_LOW_ENABLE		(1 << 0)
+#define THERM_INT_HIGH_ENABLE		(1 << 1)
+
 #define MSR_IA32_THERM_STATUS		0x0000019c
+
+#define THERM_STATUS_PROCHOT		(1 << 0)
+
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
 /* MISC_ENABLE bits: architectural */
diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 89ed9d70b0a..625c3f0e741 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -56,7 +56,7 @@ extern bool __virt_addr_valid(unsigned long kaddr);
 #endif	/* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #define __HAVE_ARCH_GATE_AREA 1
 
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 2733fad45f9..5e67c153231 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -46,6 +46,10 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
 # define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
 #endif
 
+#define MODULES_VADDR	VMALLOC_START
+#define MODULES_END	VMALLOC_END
+#define MODULES_LEN	(MODULES_VADDR - MODULES_END)
+
 #define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
 
 #endif /* _ASM_X86_PGTABLE_32_DEFS_H */
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
index 7761a5d554b..598457cbd0f 100644
--- a/arch/x86/include/asm/signal.h
+++ b/arch/x86/include/asm/signal.h
@@ -117,7 +117,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index a5ecc9c33e9..7f3eba08e7d 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -172,6 +172,6 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 	flush_tlb_all();
 }
 
-extern void zap_low_mappings(void);
+extern void zap_low_mappings(bool early);
 
 #endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index e6f73632007..09b97745772 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -14,12 +14,6 @@ typedef unsigned short umode_t;
  */
 #ifdef __KERNEL__
 
-#ifdef CONFIG_X86_32
-# define BITS_PER_LONG 32
-#else
-# define BITS_PER_LONG 64
-#endif
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma64_addr_t;
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4f78bd68212..f3477bb8456 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -73,7 +73,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_MODULES)		+= module_$(BITS).o
+obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 7c243a2c511..ca93638ba43 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -104,7 +104,7 @@ int acpi_save_state_mem(void)
 	initial_gs = per_cpu_offset(smp_processor_id());
 #endif
 	initial_code = (unsigned long)wakeup_long64;
-	saved_magic = 0x123456789abcdef0;
+       saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
 	return 0;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 076d3881f3d..8c7c042ecad 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -899,7 +899,7 @@ void clear_local_APIC(void)
 	}
 
 	/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
 		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
@@ -2017,7 +2017,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
 	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
 	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
 	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	if (maxlvt >= 5)
 		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
 #endif
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 94605e7f6a5..ef8d9290c7e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -187,8 +187,8 @@ int __init arch_early_irq_init(void)
 	for (i = 0; i < count; i++) {
 		desc = irq_to_desc(i);
 		desc->chip_data = &cfg[i];
-		alloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node);
-		alloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node);
+		zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node);
+		zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node);
 		if (i < NR_IRQS_LEGACY)
 			cpumask_setall(cfg[i].domain);
 	}
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index a691302dc3f..b3025b43b63 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -66,7 +66,7 @@ static inline unsigned int get_nmi_count(int cpu)
 
 static inline int mce_in_progress(void)
 {
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#if defined(CONFIG_X86_NEW_MCE)
 	return atomic_read(&mce_entry) > 0;
 #endif
 	return 0;
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index ef0ae207a7c..096d19aea2f 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -463,7 +463,7 @@ static void uv_heartbeat(unsigned long ignored)
 	uv_set_scir_bits(bits);
 
 	/* enable next timer period */
-	mod_timer(timer, jiffies + SCIR_CPU_HB_INTERVAL);
+	mod_timer_pinned(timer, jiffies + SCIR_CPU_HB_INTERVAL);
 }
 
 static void __cpuinit uv_heartbeat_enable(int cpu)
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 49e0939bac4..79302e9a33a 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1233,9 +1233,9 @@ static int suspend(int vetoable)
 	int err;
 	struct apm_user	*as;
 
-	device_suspend(PMSG_SUSPEND);
+	dpm_suspend_start(PMSG_SUSPEND);
 
-	device_power_down(PMSG_SUSPEND);
+	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
@@ -1259,9 +1259,9 @@ static int suspend(int vetoable)
 	sysdev_resume();
 	local_irq_enable();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1277,7 +1277,7 @@ static void standby(void)
 {
 	int err;
 
-	device_power_down(PMSG_SUSPEND);
+	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
@@ -1291,7 +1291,7 @@ static void standby(void)
 	sysdev_resume();
 	local_irq_enable();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 }
 
 static apm_event_t get_event(void)
@@ -1376,7 +1376,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume(PMSG_RESUME);
+				dpm_resume_end(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 1a830cbd701..dfdbf640389 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -126,6 +126,7 @@ void foo(void)
 #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
 	BLANK();
 	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
+	OFFSET(LGUEST_DATA_irq_pending, lguest_data, irq_pending);
 	OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir);
 
 	BLANK();
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index b2f89829bbe..45004faf67e 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,7 +1,11 @@
-obj-y				=  mce_$(BITS).o therm_throt.o
+obj-y				=  mce.o therm_throt.o
 
-obj-$(CONFIG_X86_32)		+= k7.o p4.o p5.o p6.o winchip.o
-obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o
+obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
+obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
+obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
+obj-$(CONFIG_X86_MCE_P4THERMAL)	+= mce_intel.o
+obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o mce_intel.o
 obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd_64.o
 obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
+obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index dd3af6e7b39..89e51042415 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -2,11 +2,10 @@
  * Athlon specific Machine Check Exception Reporting
  * (C) Copyright 2002 Dave Jones <davej@redhat.com>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -15,12 +14,12 @@
 
 #include "mce.h"
 
-/* Machine Check Handler For AMD Athlon/Duron */
+/* Machine Check Handler For AMD Athlon/Duron: */
 static void k7_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
+	int recover = 1;
 	int i;
 
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -32,15 +31,19 @@ static void k7_machine_check(struct pt_regs *regs, long error_code)
 
 	for (i = 1; i < nr_mce_banks; i++) {
 		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high&(1<<31)) {
+		if (high & (1<<31)) {
 			char misc[20];
 			char addr[24];
-			misc[0] = addr[0] = '\0';
+
+			misc[0] = '\0';
+			addr[0] = '\0';
+
 			if (high & (1<<29))
 				recover |= 1;
 			if (high & (1<<25))
 				recover |= 2;
 			high &= ~(1<<31);
+
 			if (high & (1<<27)) {
 				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
 				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
@@ -49,27 +52,31 @@ static void k7_machine_check(struct pt_regs *regs, long error_code)
 				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
 				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
 			}
+
 			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
 				smp_processor_id(), i, high, low, misc, addr);
-			/* Clear it */
+
+			/* Clear it: */
 			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-			/* Serialize */
+			/* Serialize: */
 			wmb();
 			add_taint(TAINT_MACHINE_CHECK);
 		}
 	}
 
-	if (recover&2)
+	if (recover & 2)
 		panic("CPU context corrupt");
-	if (recover&1)
+	if (recover & 1)
 		panic("Unable to continue");
+
 	printk(KERN_EMERG "Attempting to continue.\n");
+
 	mcgstl &= ~(1<<2);
 	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 
-/* AMD K7 machine check is Intel like */
+/* AMD K7 machine check is Intel like: */
 void amd_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -79,21 +86,26 @@ void amd_mcheck_init(struct cpuinfo_x86 *c)
 		return;
 
 	machine_check_vector = k7_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
 
 	printk(KERN_INFO "Intel machine check architecture supported.\n");
+
 	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	/* Clear status for MC index 0 separately, we don't touch CTL,
-	 * as some K7 Athlons cause spurious MCEs when its enabled. */
+	/*
+	 * Clear status for MC index 0 separately, we don't touch CTL,
+	 * as some K7 Athlons cause spurious MCEs when its enabled:
+	 */
 	if (boot_cpu_data.x86 == 6) {
 		wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
 		i = 1;
 	} else
 		i = 0;
+
 	for (; i < nr_mce_banks; i++) {
 		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
 		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
new file mode 100644
index 00000000000..a3a235a53f0
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -0,0 +1,127 @@
+/*
+ * Machine check injection support.
+ * Copyright 2008 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Authors:
+ * Andi Kleen
+ * Ying Huang
+ */
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <asm/mce.h>
+
+/* Update fake mce registers on current CPU. */
+static void inject_mce(struct mce *m)
+{
+	struct mce *i = &per_cpu(injectm, m->extcpu);
+
+	/* Make sure noone reads partially written injectm */
+	i->finished = 0;
+	mb();
+	m->finished = 0;
+	/* First set the fields after finished */
+	i->extcpu = m->extcpu;
+	mb();
+	/* Now write record in order, finished last (except above) */
+	memcpy(i, m, sizeof(struct mce));
+	/* Finally activate it */
+	mb();
+	i->finished = 1;
+}
+
+struct delayed_mce {
+	struct timer_list timer;
+	struct mce m;
+};
+
+/* Inject mce on current CPU */
+static void raise_mce(unsigned long data)
+{
+	struct delayed_mce *dm = (struct delayed_mce *)data;
+	struct mce *m = &dm->m;
+	int cpu = m->extcpu;
+
+	inject_mce(m);
+	if (m->status & MCI_STATUS_UC) {
+		struct pt_regs regs;
+		memset(&regs, 0, sizeof(struct pt_regs));
+		regs.ip = m->ip;
+		regs.cs = m->cs;
+		printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
+		do_machine_check(&regs, 0);
+		printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
+	} else {
+		mce_banks_t b;
+		memset(&b, 0xff, sizeof(mce_banks_t));
+		printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
+		machine_check_poll(0, &b);
+		mce_notify_irq();
+		printk(KERN_INFO "Finished machine check poll on CPU %d\n",
+		       cpu);
+	}
+	kfree(dm);
+}
+
+/* Error injection interface */
+static ssize_t mce_write(struct file *filp, const char __user *ubuf,
+			 size_t usize, loff_t *off)
+{
+	struct delayed_mce *dm;
+	struct mce m;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	/*
+	 * There are some cases where real MSR reads could slip
+	 * through.
+	 */
+	if (!boot_cpu_has(X86_FEATURE_MCE) || !boot_cpu_has(X86_FEATURE_MCA))
+		return -EIO;
+
+	if ((unsigned long)usize > sizeof(struct mce))
+		usize = sizeof(struct mce);
+	if (copy_from_user(&m, ubuf, usize))
+		return -EFAULT;
+
+	if (m.extcpu >= num_possible_cpus() || !cpu_online(m.extcpu))
+		return -EINVAL;
+
+	dm = kmalloc(sizeof(struct delayed_mce), GFP_KERNEL);
+	if (!dm)
+		return -ENOMEM;
+
+	/*
+	 * Need to give user space some time to set everything up,
+	 * so do it a jiffie or two later everywhere.
+	 * Should we use a hrtimer here for better synchronization?
+	 */
+	memcpy(&dm->m, &m, sizeof(struct mce));
+	setup_timer(&dm->timer, raise_mce, (unsigned long)dm);
+	dm->timer.expires = jiffies + 2;
+	add_timer_on(&dm->timer, m.extcpu);
+	return usize;
+}
+
+static int inject_init(void)
+{
+	printk(KERN_INFO "Machine check injector initialized\n");
+	mce_chrdev_ops.write = mce_write;
+	return 0;
+}
+
+module_init(inject_init);
+/*
+ * Cannot tolerate unloading currently because we cannot
+ * guarantee all openers of mce_chrdev will get a reference to us.
+ */
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
new file mode 100644
index 00000000000..54dcb8ff12e
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -0,0 +1,15 @@
+#include <asm/mce.h>
+
+enum severity_level {
+	MCE_NO_SEVERITY,
+	MCE_KEEP_SEVERITY,
+	MCE_SOME_SEVERITY,
+	MCE_AO_SEVERITY,
+	MCE_UC_SEVERITY,
+	MCE_AR_SEVERITY,
+	MCE_PANIC_SEVERITY,
+};
+
+int mce_severity(struct mce *a, int tolerant, char **msg);
+
+extern int mce_ser;
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
new file mode 100644
index 00000000000..ff0807f9705
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -0,0 +1,218 @@
+/*
+ * MCE grading rules.
+ * Copyright 2008, 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Author: Andi Kleen
+ */
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <asm/mce.h>
+
+#include "mce-internal.h"
+
+/*
+ * Grade an mce by severity. In general the most severe ones are processed
+ * first. Since there are quite a lot of combinations test the bits in a
+ * table-driven way. The rules are simply processed in order, first
+ * match wins.
+ *
+ * Note this is only used for machine check exceptions, the corrected
+ * errors use much simpler rules. The exceptions still check for the corrected
+ * errors, but only to leave them alone for the CMCI handler (except for
+ * panic situations)
+ */
+
+enum context { IN_KERNEL = 1, IN_USER = 2 };
+enum ser { SER_REQUIRED = 1, NO_SER = 2 };
+
+static struct severity {
+	u64 mask;
+	u64 result;
+	unsigned char sev;
+	unsigned char mcgmask;
+	unsigned char mcgres;
+	unsigned char ser;
+	unsigned char context;
+	unsigned char covered;
+	char *msg;
+} severities[] = {
+#define KERNEL .context = IN_KERNEL
+#define USER .context = IN_USER
+#define SER .ser = SER_REQUIRED
+#define NOSER .ser = NO_SER
+#define SEV(s) .sev = MCE_ ## s ## _SEVERITY
+#define BITCLR(x, s, m, r...) { .mask = x, .result = 0, SEV(s), .msg = m, ## r }
+#define BITSET(x, s, m, r...) { .mask = x, .result = x, SEV(s), .msg = m, ## r }
+#define MCGMASK(x, res, s, m, r...) \
+	{ .mcgmask = x, .mcgres = res, SEV(s), .msg = m, ## r }
+#define MASK(x, y, s, m, r...) \
+	{ .mask = x, .result = y, SEV(s), .msg = m, ## r }
+#define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
+#define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
+#define MCACOD 0xffff
+
+	BITCLR(MCI_STATUS_VAL, NO, "Invalid"),
+	BITCLR(MCI_STATUS_EN, NO, "Not enabled"),
+	BITSET(MCI_STATUS_PCC, PANIC, "Processor context corrupt"),
+	/* When MCIP is not set something is very confused */
+	MCGMASK(MCG_STATUS_MCIP, 0, PANIC, "MCIP not set in MCA handler"),
+	/* Neither return not error IP -- no chance to recover -> PANIC */
+	MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, 0, PANIC,
+		"Neither restart nor error IP"),
+	MCGMASK(MCG_STATUS_RIPV, 0, PANIC, "In kernel and no restart IP",
+		KERNEL),
+	BITCLR(MCI_STATUS_UC, KEEP, "Corrected error", NOSER),
+	MASK(MCI_STATUS_OVER|MCI_STATUS_UC|MCI_STATUS_EN, MCI_STATUS_UC, SOME,
+	     "Spurious not enabled", SER),
+
+	/* ignore OVER for UCNA */
+	MASK(MCI_UC_SAR, MCI_STATUS_UC, KEEP,
+	     "Uncorrected no action required", SER),
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_UC|MCI_STATUS_AR, PANIC,
+	     "Illegal combination (UCNA with AR=1)", SER),
+	MASK(MCI_STATUS_S, 0, KEEP, "Non signalled machine check", SER),
+
+	/* AR add known MCACODs here */
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_OVER|MCI_UC_SAR, PANIC,
+	     "Action required with lost events", SER),
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCACOD, MCI_UC_SAR, PANIC,
+	     "Action required; unknown MCACOD", SER),
+
+	/* known AO MCACODs: */
+	MASK(MCI_UC_SAR|MCI_STATUS_OVER|0xfff0, MCI_UC_S|0xc0, AO,
+	     "Action optional: memory scrubbing error", SER),
+	MASK(MCI_UC_SAR|MCI_STATUS_OVER|MCACOD, MCI_UC_S|0x17a, AO,
+	     "Action optional: last level cache writeback error", SER),
+
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S, SOME,
+	     "Action optional unknown MCACOD", SER),
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S|MCI_STATUS_OVER, SOME,
+	     "Action optional with lost events", SER),
+	BITSET(MCI_STATUS_UC|MCI_STATUS_OVER, PANIC, "Overflowed uncorrected"),
+	BITSET(MCI_STATUS_UC, UC, "Uncorrected"),
+	BITSET(0, SOME, "No match")	/* always matches. keep at end */
+};
+
+/*
+ * If the EIPV bit is set, it means the saved IP is the
+ * instruction which caused the MCE.
+ */
+static int error_context(struct mce *m)
+{
+	if (m->mcgstatus & MCG_STATUS_EIPV)
+		return (m->ip && (m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
+	/* Unknown, assume kernel */
+	return IN_KERNEL;
+}
+
+int mce_severity(struct mce *a, int tolerant, char **msg)
+{
+	enum context ctx = error_context(a);
+	struct severity *s;
+
+	for (s = severities;; s++) {
+		if ((a->status & s->mask) != s->result)
+			continue;
+		if ((a->mcgstatus & s->mcgmask) != s->mcgres)
+			continue;
+		if (s->ser == SER_REQUIRED && !mce_ser)
+			continue;
+		if (s->ser == NO_SER && mce_ser)
+			continue;
+		if (s->context && ctx != s->context)
+			continue;
+		if (msg)
+			*msg = s->msg;
+		s->covered = 1;
+		if (s->sev >= MCE_UC_SEVERITY && ctx == IN_KERNEL) {
+			if (panic_on_oops || tolerant < 1)
+				return MCE_PANIC_SEVERITY;
+		}
+		return s->sev;
+	}
+}
+
+static void *s_start(struct seq_file *f, loff_t *pos)
+{
+	if (*pos >= ARRAY_SIZE(severities))
+		return NULL;
+	return &severities[*pos];
+}
+
+static void *s_next(struct seq_file *f, void *data, loff_t *pos)
+{
+	if (++(*pos) >= ARRAY_SIZE(severities))
+		return NULL;
+	return &severities[*pos];
+}
+
+static void s_stop(struct seq_file *f, void *data)
+{
+}
+
+static int s_show(struct seq_file *f, void *data)
+{
+	struct severity *ser = data;
+	seq_printf(f, "%d\t%s\n", ser->covered, ser->msg);
+	return 0;
+}
+
+static const struct seq_operations severities_seq_ops = {
+	.start	= s_start,
+	.next	= s_next,
+	.stop	= s_stop,
+	.show	= s_show,
+};
+
+static int severities_coverage_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &severities_seq_ops);
+}
+
+static ssize_t severities_coverage_write(struct file *file,
+					 const char __user *ubuf,
+					 size_t count, loff_t *ppos)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(severities); i++)
+		severities[i].covered = 0;
+	return count;
+}
+
+static const struct file_operations severities_coverage_fops = {
+	.open		= severities_coverage_open,
+	.release	= seq_release,
+	.read		= seq_read,
+	.write		= severities_coverage_write,
+};
+
+static int __init severities_debugfs_init(void)
+{
+	struct dentry *dmce = NULL, *fseverities_coverage = NULL;
+
+	dmce = debugfs_create_dir("mce", NULL);
+	if (dmce == NULL)
+		goto err_out;
+	fseverities_coverage = debugfs_create_file("severities-coverage",
+						   0444, dmce, NULL,
+						   &severities_coverage_fops);
+	if (fseverities_coverage == NULL)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	if (fseverities_coverage)
+		debugfs_remove(fseverities_coverage);
+	if (dmce)
+		debugfs_remove(dmce);
+	return -ENOMEM;
+}
+late_initcall(severities_debugfs_init);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
new file mode 100644
index 00000000000..fabba15e455
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -0,0 +1,1964 @@
+/*
+ * Machine check handler.
+ *
+ * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
+ * Rest from unknown author(s).
+ * 2004 Andi Kleen. Rewrote most of it.
+ * Copyright 2008 Intel Corporation
+ * Author: Andi Kleen
+ */
+#include <linux/thread_info.h>
+#include <linux/capability.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ratelimit.h>
+#include <linux/kallsyms.h>
+#include <linux/rcupdate.h>
+#include <linux/kobject.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/string.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/sched.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/poll.h>
+#include <linux/nmi.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/processor.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/ipi.h>
+#include <asm/mce.h>
+#include <asm/msr.h>
+
+#include "mce-internal.h"
+#include "mce.h"
+
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+	       smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) =
+						unexpected_machine_check;
+
+int				mce_disabled;
+
+#ifdef CONFIG_X86_NEW_MCE
+
+#define MISC_MCELOG_MINOR	227
+
+#define SPINUNIT 100	/* 100ns */
+
+atomic_t mce_entry;
+
+DEFINE_PER_CPU(unsigned, mce_exception_count);
+
+/*
+ * Tolerant levels:
+ *   0: always panic on uncorrected errors, log corrected errors
+ *   1: panic or SIGBUS on uncorrected errors, log corrected errors
+ *   2: SIGBUS or log uncorrected errors (if possible), log corrected errors
+ *   3: never panic or SIGBUS, log all errors (for testing only)
+ */
+static int			tolerant = 1;
+static int			banks;
+static u64			*bank;
+static unsigned long		notify_user;
+static int			rip_msr;
+static int			mce_bootlog = -1;
+static int			monarch_timeout = -1;
+static int			mce_panic_timeout;
+static int			mce_dont_log_ce;
+int				mce_cmci_disabled;
+int				mce_ignore_ce;
+int				mce_ser;
+
+static char			trigger[128];
+static char			*trigger_argv[2] = { trigger, NULL };
+
+static unsigned long		dont_init_banks;
+
+static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
+static DEFINE_PER_CPU(struct mce, mces_seen);
+static int			cpu_missing;
+
+
+/* MCA banks polled by the period polling timer for corrected events */
+DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
+	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
+};
+
+static inline int skip_bank_init(int i)
+{
+	return i < BITS_PER_LONG && test_bit(i, &dont_init_banks);
+}
+
+static DEFINE_PER_CPU(struct work_struct, mce_work);
+
+/* Do initial initialization of a struct mce */
+void mce_setup(struct mce *m)
+{
+	memset(m, 0, sizeof(struct mce));
+	m->cpu = m->extcpu = smp_processor_id();
+	rdtscll(m->tsc);
+	/* We hope get_seconds stays lockless */
+	m->time = get_seconds();
+	m->cpuvendor = boot_cpu_data.x86_vendor;
+	m->cpuid = cpuid_eax(1);
+#ifdef CONFIG_SMP
+	m->socketid = cpu_data(m->extcpu).phys_proc_id;
+#endif
+	m->apicid = cpu_data(m->extcpu).initial_apicid;
+	rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap);
+}
+
+DEFINE_PER_CPU(struct mce, injectm);
+EXPORT_PER_CPU_SYMBOL_GPL(injectm);
+
+/*
+ * Lockless MCE logging infrastructure.
+ * This avoids deadlocks on printk locks without having to break locks. Also
+ * separate MCEs from kernel messages to avoid bogus bug reports.
+ */
+
+static struct mce_log mcelog = {
+	.signature	= MCE_LOG_SIGNATURE,
+	.len		= MCE_LOG_LEN,
+	.recordlen	= sizeof(struct mce),
+};
+
+void mce_log(struct mce *mce)
+{
+	unsigned next, entry;
+
+	mce->finished = 0;
+	wmb();
+	for (;;) {
+		entry = rcu_dereference(mcelog.next);
+		for (;;) {
+			/*
+			 * When the buffer fills up discard new entries.
+			 * Assume that the earlier errors are the more
+			 * interesting ones:
+			 */
+			if (entry >= MCE_LOG_LEN) {
+				set_bit(MCE_OVERFLOW,
+					(unsigned long *)&mcelog.flags);
+				return;
+			}
+			/* Old left over entry. Skip: */
+			if (mcelog.entry[entry].finished) {
+				entry++;
+				continue;
+			}
+			break;
+		}
+		smp_rmb();
+		next = entry + 1;
+		if (cmpxchg(&mcelog.next, entry, next) == entry)
+			break;
+	}
+	memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
+	wmb();
+	mcelog.entry[entry].finished = 1;
+	wmb();
+
+	mce->finished = 1;
+	set_bit(0, &notify_user);
+}
+
+static void print_mce(struct mce *m)
+{
+	printk(KERN_EMERG
+	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+	       m->extcpu, m->mcgstatus, m->bank, m->status);
+	if (m->ip) {
+		printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
+		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
+		       m->cs, m->ip);
+		if (m->cs == __KERNEL_CS)
+			print_symbol("{%s}", m->ip);
+		printk("\n");
+	}
+	printk(KERN_EMERG "TSC %llx ", m->tsc);
+	if (m->addr)
+		printk("ADDR %llx ", m->addr);
+	if (m->misc)
+		printk("MISC %llx ", m->misc);
+	printk("\n");
+	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+			m->cpuvendor, m->cpuid, m->time, m->socketid,
+			m->apicid);
+}
+
+static void print_mce_head(void)
+{
+	printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+}
+
+static void print_mce_tail(void)
+{
+	printk(KERN_EMERG "This is not a software problem!\n"
+	       KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+}
+
+#define PANIC_TIMEOUT 5 /* 5 seconds */
+
+static atomic_t mce_paniced;
+
+/* Panic in progress. Enable interrupts and wait for final IPI */
+static void wait_for_panic(void)
+{
+	long timeout = PANIC_TIMEOUT*USEC_PER_SEC;
+	preempt_disable();
+	local_irq_enable();
+	while (timeout-- > 0)
+		udelay(1);
+	if (panic_timeout == 0)
+		panic_timeout = mce_panic_timeout;
+	panic("Panicing machine check CPU died");
+}
+
+static void mce_panic(char *msg, struct mce *final, char *exp)
+{
+	int i;
+
+	/*
+	 * Make sure only one CPU runs in machine check panic
+	 */
+	if (atomic_add_return(1, &mce_paniced) > 1)
+		wait_for_panic();
+	barrier();
+
+	bust_spinlocks(1);
+	console_verbose();
+	print_mce_head();
+	/* First print corrected ones that are still unlogged */
+	for (i = 0; i < MCE_LOG_LEN; i++) {
+		struct mce *m = &mcelog.entry[i];
+		if (!(m->status & MCI_STATUS_VAL))
+			continue;
+		if (!(m->status & MCI_STATUS_UC))
+			print_mce(m);
+	}
+	/* Now print uncorrected but with the final one last */
+	for (i = 0; i < MCE_LOG_LEN; i++) {
+		struct mce *m = &mcelog.entry[i];
+		if (!(m->status & MCI_STATUS_VAL))
+			continue;
+		if (!(m->status & MCI_STATUS_UC))
+			continue;
+		if (!final || memcmp(m, final, sizeof(struct mce)))
+			print_mce(m);
+	}
+	if (final)
+		print_mce(final);
+	if (cpu_missing)
+		printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n");
+	print_mce_tail();
+	if (exp)
+		printk(KERN_EMERG "Machine check: %s\n", exp);
+	if (panic_timeout == 0)
+		panic_timeout = mce_panic_timeout;
+	panic(msg);
+}
+
+/* Support code for software error injection */
+
+static int msr_to_offset(u32 msr)
+{
+	unsigned bank = __get_cpu_var(injectm.bank);
+	if (msr == rip_msr)
+		return offsetof(struct mce, ip);
+	if (msr == MSR_IA32_MC0_STATUS + bank*4)
+		return offsetof(struct mce, status);
+	if (msr == MSR_IA32_MC0_ADDR + bank*4)
+		return offsetof(struct mce, addr);
+	if (msr == MSR_IA32_MC0_MISC + bank*4)
+		return offsetof(struct mce, misc);
+	if (msr == MSR_IA32_MCG_STATUS)
+		return offsetof(struct mce, mcgstatus);
+	return -1;
+}
+
+/* MSR access wrappers used for error injection */
+static u64 mce_rdmsrl(u32 msr)
+{
+	u64 v;
+	if (__get_cpu_var(injectm).finished) {
+		int offset = msr_to_offset(msr);
+		if (offset < 0)
+			return 0;
+		return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
+	}
+	rdmsrl(msr, v);
+	return v;
+}
+
+static void mce_wrmsrl(u32 msr, u64 v)
+{
+	if (__get_cpu_var(injectm).finished) {
+		int offset = msr_to_offset(msr);
+		if (offset >= 0)
+			*(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
+		return;
+	}
+	wrmsrl(msr, v);
+}
+
+/*
+ * Simple lockless ring to communicate PFNs from the exception handler with the
+ * process context work function. This is vastly simplified because there's
+ * only a single reader and a single writer.
+ */
+#define MCE_RING_SIZE 16	/* we use one entry less */
+
+struct mce_ring {
+	unsigned short start;
+	unsigned short end;
+	unsigned long ring[MCE_RING_SIZE];
+};
+static DEFINE_PER_CPU(struct mce_ring, mce_ring);
+
+/* Runs with CPU affinity in workqueue */
+static int mce_ring_empty(void)
+{
+	struct mce_ring *r = &__get_cpu_var(mce_ring);
+
+	return r->start == r->end;
+}
+
+static int mce_ring_get(unsigned long *pfn)
+{
+	struct mce_ring *r;
+	int ret = 0;
+
+	*pfn = 0;
+	get_cpu();
+	r = &__get_cpu_var(mce_ring);
+	if (r->start == r->end)
+		goto out;
+	*pfn = r->ring[r->start];
+	r->start = (r->start + 1) % MCE_RING_SIZE;
+	ret = 1;
+out:
+	put_cpu();
+	return ret;
+}
+
+/* Always runs in MCE context with preempt off */
+static int mce_ring_add(unsigned long pfn)
+{
+	struct mce_ring *r = &__get_cpu_var(mce_ring);
+	unsigned next;
+
+	next = (r->end + 1) % MCE_RING_SIZE;
+	if (next == r->start)
+		return -1;
+	r->ring[r->end] = pfn;
+	wmb();
+	r->end = next;
+	return 0;
+}
+
+int mce_available(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled)
+		return 0;
+	return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
+}
+
+static void mce_schedule_work(void)
+{
+	if (!mce_ring_empty()) {
+		struct work_struct *work = &__get_cpu_var(mce_work);
+		if (!work_pending(work))
+			schedule_work(work);
+	}
+}
+
+/*
+ * Get the address of the instruction at the time of the machine check
+ * error.
+ */
+static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
+{
+
+	if (regs && (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV))) {
+		m->ip = regs->ip;
+		m->cs = regs->cs;
+	} else {
+		m->ip = 0;
+		m->cs = 0;
+	}
+	if (rip_msr)
+		m->ip = mce_rdmsrl(rip_msr);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC 
+/*
+ * Called after interrupts have been reenabled again
+ * when a MCE happened during an interrupts off region
+ * in the kernel.
+ */
+asmlinkage void smp_mce_self_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+	exit_idle();
+	irq_enter();
+	mce_notify_irq();
+	mce_schedule_work();
+	irq_exit();
+}
+#endif
+
+static void mce_report_event(struct pt_regs *regs)
+{
+	if (regs->flags & (X86_VM_MASK|X86_EFLAGS_IF)) {
+		mce_notify_irq();
+		/*
+		 * Triggering the work queue here is just an insurance
+		 * policy in case the syscall exit notify handler
+		 * doesn't run soon enough or ends up running on the
+		 * wrong CPU (can happen when audit sleeps)
+		 */
+		mce_schedule_work();
+		return;
+	}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * Without APIC do not notify. The event will be picked
+	 * up eventually.
+	 */
+	if (!cpu_has_apic)
+		return;
+
+	/*
+	 * When interrupts are disabled we cannot use
+	 * kernel services safely. Trigger an self interrupt
+	 * through the APIC to instead do the notification
+	 * after interrupts are reenabled again.
+	 */
+	apic->send_IPI_self(MCE_SELF_VECTOR);
+
+	/*
+	 * Wait for idle afterwards again so that we don't leave the
+	 * APIC in a non idle state because the normal APIC writes
+	 * cannot exclude us.
+	 */
+	apic_wait_icr_idle();
+#endif
+}
+
+DEFINE_PER_CPU(unsigned, mce_poll_count);
+
+/*
+ * Poll for corrected events or events that happened before reset.
+ * Those are just logged through /dev/mcelog.
+ *
+ * This is executed in standard interrupt context.
+ *
+ * Note: spec recommends to panic for fatal unsignalled
+ * errors here. However this would be quite problematic --
+ * we would need to reimplement the Monarch handling and
+ * it would mess up the exclusion between exception handler
+ * and poll hander -- * so we skip this for now.
+ * These cases should not happen anyways, or only when the CPU
+ * is already totally * confused. In this case it's likely it will
+ * not fully execute the machine check handler either.
+ */
+void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
+{
+	struct mce m;
+	int i;
+
+	__get_cpu_var(mce_poll_count)++;
+
+	mce_setup(&m);
+
+	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+	for (i = 0; i < banks; i++) {
+		if (!bank[i] || !test_bit(i, *b))
+			continue;
+
+		m.misc = 0;
+		m.addr = 0;
+		m.bank = i;
+		m.tsc = 0;
+
+		barrier();
+		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		if (!(m.status & MCI_STATUS_VAL))
+			continue;
+
+		/*
+		 * Uncorrected or signalled events are handled by the exception
+		 * handler when it is enabled, so don't process those here.
+		 *
+		 * TBD do the same check for MCI_STATUS_EN here?
+		 */
+		if (!(flags & MCP_UC) &&
+		    (m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)))
+			continue;
+
+		if (m.status & MCI_STATUS_MISCV)
+			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+		if (m.status & MCI_STATUS_ADDRV)
+			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+
+		if (!(flags & MCP_TIMESTAMP))
+			m.tsc = 0;
+		/*
+		 * Don't get the IP here because it's unlikely to
+		 * have anything to do with the actual error location.
+		 */
+		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
+			mce_log(&m);
+			add_taint(TAINT_MACHINE_CHECK);
+		}
+
+		/*
+		 * Clear state for this bank.
+		 */
+		mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+	}
+
+	/*
+	 * Don't clear MCG_STATUS here because it's only defined for
+	 * exceptions.
+	 */
+
+	sync_core();
+}
+EXPORT_SYMBOL_GPL(machine_check_poll);
+
+/*
+ * Do a quick check if any of the events requires a panic.
+ * This decides if we keep the events around or clear them.
+ */
+static int mce_no_way_out(struct mce *m, char **msg)
+{
+	int i;
+
+	for (i = 0; i < banks; i++) {
+		m->status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Variable to establish order between CPUs while scanning.
+ * Each CPU spins initially until executing is equal its number.
+ */
+static atomic_t mce_executing;
+
+/*
+ * Defines order of CPUs on entry. First CPU becomes Monarch.
+ */
+static atomic_t mce_callin;
+
+/*
+ * Check if a timeout waiting for other CPUs happened.
+ */
+static int mce_timed_out(u64 *t)
+{
+	/*
+	 * The others already did panic for some reason.
+	 * Bail out like in a timeout.
+	 * rmb() to tell the compiler that system_state
+	 * might have been modified by someone else.
+	 */
+	rmb();
+	if (atomic_read(&mce_paniced))
+		wait_for_panic();
+	if (!monarch_timeout)
+		goto out;
+	if ((s64)*t < SPINUNIT) {
+		/* CHECKME: Make panic default for 1 too? */
+		if (tolerant < 1)
+			mce_panic("Timeout synchronizing machine check over CPUs",
+				  NULL, NULL);
+		cpu_missing = 1;
+		return 1;
+	}
+	*t -= SPINUNIT;
+out:
+	touch_nmi_watchdog();
+	return 0;
+}
+
+/*
+ * The Monarch's reign.  The Monarch is the CPU who entered
+ * the machine check handler first. It waits for the others to
+ * raise the exception too and then grades them. When any
+ * error is fatal panic. Only then let the others continue.
+ *
+ * The other CPUs entering the MCE handler will be controlled by the
+ * Monarch. They are called Subjects.
+ *
+ * This way we prevent any potential data corruption in a unrecoverable case
+ * and also makes sure always all CPU's errors are examined.
+ *
+ * Also this detects the case of an machine check event coming from outer
+ * space (not detected by any CPUs) In this case some external agent wants
+ * us to shut down, so panic too.
+ *
+ * The other CPUs might still decide to panic if the handler happens
+ * in a unrecoverable place, but in this case the system is in a semi-stable
+ * state and won't corrupt anything by itself. It's ok to let the others
+ * continue for a bit first.
+ *
+ * All the spin loops have timeouts; when a timeout happens a CPU
+ * typically elects itself to be Monarch.
+ */
+static void mce_reign(void)
+{
+	int cpu;
+	struct mce *m = NULL;
+	int global_worst = 0;
+	char *msg = NULL;
+	char *nmsg = NULL;
+
+	/*
+	 * This CPU is the Monarch and the other CPUs have run
+	 * through their handlers.
+	 * Grade the severity of the errors of all the CPUs.
+	 */
+	for_each_possible_cpu(cpu) {
+		int severity = mce_severity(&per_cpu(mces_seen, cpu), tolerant,
+					    &nmsg);
+		if (severity > global_worst) {
+			msg = nmsg;
+			global_worst = severity;
+			m = &per_cpu(mces_seen, cpu);
+		}
+	}
+
+	/*
+	 * Cannot recover? Panic here then.
+	 * This dumps all the mces in the log buffer and stops the
+	 * other CPUs.
+	 */
+	if (m && global_worst >= MCE_PANIC_SEVERITY && tolerant < 3)
+		mce_panic("Fatal Machine check", m, msg);
+
+	/*
+	 * For UC somewhere we let the CPU who detects it handle it.
+	 * Also must let continue the others, otherwise the handling
+	 * CPU could deadlock on a lock.
+	 */
+
+	/*
+	 * No machine check event found. Must be some external
+	 * source or one CPU is hung. Panic.
+	 */
+	if (!m && tolerant < 3)
+		mce_panic("Machine check from unknown source", NULL, NULL);
+
+	/*
+	 * Now clear all the mces_seen so that they don't reappear on
+	 * the next mce.
+	 */
+	for_each_possible_cpu(cpu)
+		memset(&per_cpu(mces_seen, cpu), 0, sizeof(struct mce));
+}
+
+static atomic_t global_nwo;
+
+/*
+ * Start of Monarch synchronization. This waits until all CPUs have
+ * entered the exception handler and then determines if any of them
+ * saw a fatal event that requires panic. Then it executes them
+ * in the entry order.
+ * TBD double check parallel CPU hotunplug
+ */
+static int mce_start(int no_way_out, int *order)
+{
+	int nwo;
+	int cpus = num_online_cpus();
+	u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
+
+	if (!timeout) {
+		*order = -1;
+		return no_way_out;
+	}
+
+	atomic_add(no_way_out, &global_nwo);
+
+	/*
+	 * Wait for everyone.
+	 */
+	while (atomic_read(&mce_callin) != cpus) {
+		if (mce_timed_out(&timeout)) {
+			atomic_set(&global_nwo, 0);
+			*order = -1;
+			return no_way_out;
+		}
+		ndelay(SPINUNIT);
+	}
+
+	/*
+	 * Cache the global no_way_out state.
+	 */
+	nwo = atomic_read(&global_nwo);
+
+	/*
+	 * Monarch starts executing now, the others wait.
+	 */
+	if (*order == 1) {
+		atomic_set(&mce_executing, 1);
+		return nwo;
+	}
+
+	/*
+	 * Now start the scanning loop one by one
+	 * in the original callin order.
+	 * This way when there are any shared banks it will
+	 * be only seen by one CPU before cleared, avoiding duplicates.
+	 */
+	while (atomic_read(&mce_executing) < *order) {
+		if (mce_timed_out(&timeout)) {
+			atomic_set(&global_nwo, 0);
+			*order = -1;
+			return no_way_out;
+		}
+		ndelay(SPINUNIT);
+	}
+	return nwo;
+}
+
+/*
+ * Synchronize between CPUs after main scanning loop.
+ * This invokes the bulk of the Monarch processing.
+ */
+static int mce_end(int order)
+{
+	int ret = -1;
+	u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
+
+	if (!timeout)
+		goto reset;
+	if (order < 0)
+		goto reset;
+
+	/*
+	 * Allow others to run.
+	 */
+	atomic_inc(&mce_executing);
+
+	if (order == 1) {
+		/* CHECKME: Can this race with a parallel hotplug? */
+		int cpus = num_online_cpus();
+
+		/*
+		 * Monarch: Wait for everyone to go through their scanning
+		 * loops.
+		 */
+		while (atomic_read(&mce_executing) <= cpus) {
+			if (mce_timed_out(&timeout))
+				goto reset;
+			ndelay(SPINUNIT);
+		}
+
+		mce_reign();
+		barrier();
+		ret = 0;
+	} else {
+		/*
+		 * Subject: Wait for Monarch to finish.
+		 */
+		while (atomic_read(&mce_executing) != 0) {
+			if (mce_timed_out(&timeout))
+				goto reset;
+			ndelay(SPINUNIT);
+		}
+
+		/*
+		 * Don't reset anything. That's done by the Monarch.
+		 */
+		return 0;
+	}
+
+	/*
+	 * Reset all global state.
+	 */
+reset:
+	atomic_set(&global_nwo, 0);
+	atomic_set(&mce_callin, 0);
+	barrier();
+
+	/*
+	 * Let others run again.
+	 */
+	atomic_set(&mce_executing, 0);
+	return ret;
+}
+
+/*
+ * Check if the address reported by the CPU is in a format we can parse.
+ * It would be possible to add code for most other cases, but all would
+ * be somewhat complicated (e.g. segment offset would require an instruction
+ * parser). So only support physical addresses upto page granuality for now.
+ */
+static int mce_usable_address(struct mce *m)
+{
+	if (!(m->status & MCI_STATUS_MISCV) || !(m->status & MCI_STATUS_ADDRV))
+		return 0;
+	if ((m->misc & 0x3f) > PAGE_SHIFT)
+		return 0;
+	if (((m->misc >> 6) & 7) != MCM_ADDR_PHYS)
+		return 0;
+	return 1;
+}
+
+static void mce_clear_state(unsigned long *toclear)
+{
+	int i;
+
+	for (i = 0; i < banks; i++) {
+		if (test_bit(i, toclear))
+			mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+	}
+}
+
+/*
+ * The actual machine check handler. This only handles real
+ * exceptions when something got corrupted coming in through int 18.
+ *
+ * This is executed in NMI context not subject to normal locking rules. This
+ * implies that most kernel services cannot be safely used. Don't even
+ * think about putting a printk in there!
+ *
+ * On Intel systems this is entered on all CPUs in parallel through
+ * MCE broadcast. However some CPUs might be broken beyond repair,
+ * so be always careful when synchronizing with others.
+ */
+void do_machine_check(struct pt_regs *regs, long error_code)
+{
+	struct mce m, *final;
+	int i;
+	int worst = 0;
+	int severity;
+	/*
+	 * Establish sequential order between the CPUs entering the machine
+	 * check handler.
+	 */
+	int order;
+
+	/*
+	 * If no_way_out gets set, there is no safe way to recover from this
+	 * MCE.  If tolerant is cranked up, we'll try anyway.
+	 */
+	int no_way_out = 0;
+	/*
+	 * If kill_it gets set, there might be a way to recover from this
+	 * error.
+	 */
+	int kill_it = 0;
+	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
+	char *msg = "Unknown";
+
+	atomic_inc(&mce_entry);
+
+	__get_cpu_var(mce_exception_count)++;
+
+	if (notify_die(DIE_NMI, "machine check", regs, error_code,
+			   18, SIGKILL) == NOTIFY_STOP)
+		goto out;
+	if (!banks)
+		goto out;
+
+	order = atomic_add_return(1, &mce_callin);
+	mce_setup(&m);
+
+	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+	no_way_out = mce_no_way_out(&m, &msg);
+
+	final = &__get_cpu_var(mces_seen);
+	*final = m;
+
+	barrier();
+
+	/*
+	 * When no restart IP must always kill or panic.
+	 */
+	if (!(m.mcgstatus & MCG_STATUS_RIPV))
+		kill_it = 1;
+
+	/*
+	 * Go through all the banks in exclusion of the other CPUs.
+	 * This way we don't report duplicated events on shared banks
+	 * because the first one to see it will clear it.
+	 */
+	no_way_out = mce_start(no_way_out, &order);
+	for (i = 0; i < banks; i++) {
+		__clear_bit(i, toclear);
+		if (!bank[i])
+			continue;
+
+		m.misc = 0;
+		m.addr = 0;
+		m.bank = i;
+
+		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		if ((m.status & MCI_STATUS_VAL) == 0)
+			continue;
+
+		/*
+		 * Non uncorrected or non signaled errors are handled by
+		 * machine_check_poll. Leave them alone, unless this panics.
+		 */
+		if (!(m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)) &&
+			!no_way_out)
+			continue;
+
+		/*
+		 * Set taint even when machine check was not enabled.
+		 */
+		add_taint(TAINT_MACHINE_CHECK);
+
+		severity = mce_severity(&m, tolerant, NULL);
+
+		/*
+		 * When machine check was for corrected handler don't touch,
+		 * unless we're panicing.
+		 */
+		if (severity == MCE_KEEP_SEVERITY && !no_way_out)
+			continue;
+		__set_bit(i, toclear);
+		if (severity == MCE_NO_SEVERITY) {
+			/*
+			 * Machine check event was not enabled. Clear, but
+			 * ignore.
+			 */
+			continue;
+		}
+
+		/*
+		 * Kill on action required.
+		 */
+		if (severity == MCE_AR_SEVERITY)
+			kill_it = 1;
+
+		if (m.status & MCI_STATUS_MISCV)
+			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+		if (m.status & MCI_STATUS_ADDRV)
+			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+
+		/*
+		 * Action optional error. Queue address for later processing.
+		 * When the ring overflows we just ignore the AO error.
+		 * RED-PEN add some logging mechanism when
+		 * usable_address or mce_add_ring fails.
+		 * RED-PEN don't ignore overflow for tolerant == 0
+		 */
+		if (severity == MCE_AO_SEVERITY && mce_usable_address(&m))
+			mce_ring_add(m.addr >> PAGE_SHIFT);
+
+		mce_get_rip(&m, regs);
+		mce_log(&m);
+
+		if (severity > worst) {
+			*final = m;
+			worst = severity;
+		}
+	}
+
+	if (!no_way_out)
+		mce_clear_state(toclear);
+
+	/*
+	 * Do most of the synchronization with other CPUs.
+	 * When there's any problem use only local no_way_out state.
+	 */
+	if (mce_end(order) < 0)
+		no_way_out = worst >= MCE_PANIC_SEVERITY;
+
+	/*
+	 * If we have decided that we just CAN'T continue, and the user
+	 * has not set tolerant to an insane level, give up and die.
+	 *
+	 * This is mainly used in the case when the system doesn't
+	 * support MCE broadcasting or it has been disabled.
+	 */
+	if (no_way_out && tolerant < 3)
+		mce_panic("Fatal machine check on current CPU", final, msg);
+
+	/*
+	 * If the error seems to be unrecoverable, something should be
+	 * done.  Try to kill as little as possible.  If we can kill just
+	 * one task, do that.  If the user has set the tolerance very
+	 * high, don't try to do anything at all.
+	 */
+
+	if (kill_it && tolerant < 3)
+		force_sig(SIGBUS, current);
+
+	/* notify userspace ASAP */
+	set_thread_flag(TIF_MCE_NOTIFY);
+
+	if (worst > 0)
+		mce_report_event(regs);
+	mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
+out:
+	atomic_dec(&mce_entry);
+	sync_core();
+}
+EXPORT_SYMBOL_GPL(do_machine_check);
+
+/* dummy to break dependency. actual code is in mm/memory-failure.c */
+void __attribute__((weak)) memory_failure(unsigned long pfn, int vector)
+{
+	printk(KERN_ERR "Action optional memory failure at %lx ignored\n", pfn);
+}
+
+/*
+ * Called after mce notification in process context. This code
+ * is allowed to sleep. Call the high level VM handler to process
+ * any corrupted pages.
+ * Assume that the work queue code only calls this one at a time
+ * per CPU.
+ * Note we don't disable preemption, so this code might run on the wrong
+ * CPU. In this case the event is picked up by the scheduled work queue.
+ * This is merely a fast path to expedite processing in some common
+ * cases.
+ */
+void mce_notify_process(void)
+{
+	unsigned long pfn;
+	mce_notify_irq();
+	while (mce_ring_get(&pfn))
+		memory_failure(pfn, MCE_VECTOR);
+}
+
+static void mce_process_work(struct work_struct *dummy)
+{
+	mce_notify_process();
+}
+
+#ifdef CONFIG_X86_MCE_INTEL
+/***
+ * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
+ * @cpu: The CPU on which the event occurred.
+ * @status: Event status information
+ *
+ * This function should be called by the thermal interrupt after the
+ * event has been processed and the decision was made to log the event
+ * further.
+ *
+ * The status parameter will be saved to the 'status' field of 'struct mce'
+ * and historically has been the register value of the
+ * MSR_IA32_THERMAL_STATUS (Intel) msr.
+ */
+void mce_log_therm_throt_event(__u64 status)
+{
+	struct mce m;
+
+	mce_setup(&m);
+	m.bank = MCE_THERMAL_BANK;
+	m.status = status;
+	mce_log(&m);
+}
+#endif /* CONFIG_X86_MCE_INTEL */
+
+/*
+ * Periodic polling timer for "silent" machine check errors.  If the
+ * poller finds an MCE, poll 2x faster.  When the poller finds no more
+ * errors, poll 2x slower (up to check_interval seconds).
+ */
+static int check_interval = 5 * 60; /* 5 minutes */
+
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
+static DEFINE_PER_CPU(struct timer_list, mce_timer);
+
+static void mcheck_timer(unsigned long data)
+{
+	struct timer_list *t = &per_cpu(mce_timer, data);
+	int *n;
+
+	WARN_ON(smp_processor_id() != data);
+
+	if (mce_available(&current_cpu_data)) {
+		machine_check_poll(MCP_TIMESTAMP,
+				&__get_cpu_var(mce_poll_banks));
+	}
+
+	/*
+	 * Alert userspace if needed.  If we logged an MCE, reduce the
+	 * polling interval, otherwise increase the polling interval.
+	 */
+	n = &__get_cpu_var(next_interval);
+	if (mce_notify_irq())
+		*n = max(*n/2, HZ/100);
+	else
+		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
+
+	t->expires = jiffies + *n;
+	add_timer(t);
+}
+
+static void mce_do_trigger(struct work_struct *work)
+{
+	call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
+}
+
+static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
+
+/*
+ * Notify the user(s) about new machine check events.
+ * Can be called from interrupt context, but not from machine check/NMI
+ * context.
+ */
+int mce_notify_irq(void)
+{
+	/* Not more than two messages every minute */
+	static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2);
+
+	clear_thread_flag(TIF_MCE_NOTIFY);
+
+	if (test_and_clear_bit(0, &notify_user)) {
+		wake_up_interruptible(&mce_wait);
+
+		/*
+		 * There is no risk of missing notifications because
+		 * work_pending is always cleared before the function is
+		 * executed.
+		 */
+		if (trigger[0] && !work_pending(&mce_trigger_work))
+			schedule_work(&mce_trigger_work);
+
+		if (__ratelimit(&ratelimit))
+			printk(KERN_INFO "Machine check events logged\n");
+
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mce_notify_irq);
+
+/*
+ * Initialize Machine Checks for a CPU.
+ */
+static int mce_cap_init(void)
+{
+	unsigned b;
+	u64 cap;
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+
+	b = cap & MCG_BANKCNT_MASK;
+	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+
+	if (b > MAX_NR_BANKS) {
+		printk(KERN_WARNING
+		       "MCE: Using only %u machine check banks out of %u\n",
+			MAX_NR_BANKS, b);
+		b = MAX_NR_BANKS;
+	}
+
+	/* Don't support asymmetric configurations today */
+	WARN_ON(banks != 0 && b != banks);
+	banks = b;
+	if (!bank) {
+		bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
+		if (!bank)
+			return -ENOMEM;
+		memset(bank, 0xff, banks * sizeof(u64));
+	}
+
+	/* Use accurate RIP reporting if available. */
+	if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9)
+		rip_msr = MSR_IA32_MCG_EIP;
+
+	if (cap & MCG_SER_P)
+		mce_ser = 1;
+
+	return 0;
+}
+
+static void mce_init(void)
+{
+	mce_banks_t all_banks;
+	u64 cap;
+	int i;
+
+	/*
+	 * Log the machine checks left over from the previous reset.
+	 */
+	bitmap_fill(all_banks, MAX_NR_BANKS);
+	machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
+
+	set_in_cr4(X86_CR4_MCE);
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	if (cap & MCG_CTL_P)
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+
+	for (i = 0; i < banks; i++) {
+		if (skip_bank_init(i))
+			continue;
+		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+	}
+}
+
+/* Add per CPU specific workarounds here */
+static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+{
+	/* This should be disabled by the BIOS, but isn't always */
+	if (c->x86_vendor == X86_VENDOR_AMD) {
+		if (c->x86 == 15 && banks > 4) {
+			/*
+			 * disable GART TBL walk error reporting, which
+			 * trips off incorrectly with the IOMMU & 3ware
+			 * & Cerberus:
+			 */
+			clear_bit(10, (unsigned long *)&bank[4]);
+		}
+		if (c->x86 <= 17 && mce_bootlog < 0) {
+			/*
+			 * Lots of broken BIOS around that don't clear them
+			 * by default and leave crap in there. Don't log:
+			 */
+			mce_bootlog = 0;
+		}
+		/*
+		 * Various K7s with broken bank 0 around. Always disable
+		 * by default.
+		 */
+		 if (c->x86 == 6)
+			bank[0] = 0;
+	}
+
+	if (c->x86_vendor == X86_VENDOR_INTEL) {
+		/*
+		 * SDM documents that on family 6 bank 0 should not be written
+		 * because it aliases to another special BIOS controlled
+		 * register.
+		 * But it's not aliased anymore on model 0x1a+
+		 * Don't ignore bank 0 completely because there could be a
+		 * valid event later, merely don't write CTL0.
+		 */
+
+		if (c->x86 == 6 && c->x86_model < 0x1A)
+			__set_bit(0, &dont_init_banks);
+
+		/*
+		 * All newer Intel systems support MCE broadcasting. Enable
+		 * synchronization with a one second timeout.
+		 */
+		if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
+			monarch_timeout < 0)
+			monarch_timeout = USEC_PER_SEC;
+	}
+	if (monarch_timeout < 0)
+		monarch_timeout = 0;
+	if (mce_bootlog != 0)
+		mce_panic_timeout = 30;
+}
+
+static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
+{
+	if (c->x86 != 5)
+		return;
+	switch (c->x86_vendor) {
+	case X86_VENDOR_INTEL:
+		if (mce_p5_enabled())
+			intel_p5_mcheck_init(c);
+		break;
+	case X86_VENDOR_CENTAUR:
+		winchip_mcheck_init(c);
+		break;
+	}
+}
+
+static void mce_cpu_features(struct cpuinfo_x86 *c)
+{
+	switch (c->x86_vendor) {
+	case X86_VENDOR_INTEL:
+		mce_intel_feature_init(c);
+		break;
+	case X86_VENDOR_AMD:
+		mce_amd_feature_init(c);
+		break;
+	default:
+		break;
+	}
+}
+
+static void mce_init_timer(void)
+{
+	struct timer_list *t = &__get_cpu_var(mce_timer);
+	int *n = &__get_cpu_var(next_interval);
+
+	if (mce_ignore_ce)
+		return;
+
+	*n = check_interval * HZ;
+	if (!*n)
+		return;
+	setup_timer(t, mcheck_timer, smp_processor_id());
+	t->expires = round_jiffies(jiffies + *n);
+	add_timer(t);
+}
+
+/*
+ * Called for each booted CPU to set up machine checks.
+ * Must be called with preempt off:
+ */
+void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled)
+		return;
+
+	mce_ancient_init(c);
+
+	if (!mce_available(c))
+		return;
+
+	if (mce_cap_init() < 0) {
+		mce_disabled = 1;
+		return;
+	}
+	mce_cpu_quirks(c);
+
+	machine_check_vector = do_machine_check;
+
+	mce_init();
+	mce_cpu_features(c);
+	mce_init_timer();
+	INIT_WORK(&__get_cpu_var(mce_work), mce_process_work);
+}
+
+/*
+ * Character device to read and clear the MCE log.
+ */
+
+static DEFINE_SPINLOCK(mce_state_lock);
+static int		open_count;		/* #times opened */
+static int		open_exclu;		/* already open exclusive? */
+
+static int mce_open(struct inode *inode, struct file *file)
+{
+	spin_lock(&mce_state_lock);
+
+	if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
+		spin_unlock(&mce_state_lock);
+
+		return -EBUSY;
+	}
+
+	if (file->f_flags & O_EXCL)
+		open_exclu = 1;
+	open_count++;
+
+	spin_unlock(&mce_state_lock);
+
+	return nonseekable_open(inode, file);
+}
+
+static int mce_release(struct inode *inode, struct file *file)
+{
+	spin_lock(&mce_state_lock);
+
+	open_count--;
+	open_exclu = 0;
+
+	spin_unlock(&mce_state_lock);
+
+	return 0;
+}
+
+static void collect_tscs(void *data)
+{
+	unsigned long *cpu_tsc = (unsigned long *)data;
+
+	rdtscll(cpu_tsc[smp_processor_id()]);
+}
+
+static DEFINE_MUTEX(mce_read_mutex);
+
+static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
+			loff_t *off)
+{
+	char __user *buf = ubuf;
+	unsigned long *cpu_tsc;
+	unsigned prev, next;
+	int i, err;
+
+	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
+	if (!cpu_tsc)
+		return -ENOMEM;
+
+	mutex_lock(&mce_read_mutex);
+	next = rcu_dereference(mcelog.next);
+
+	/* Only supports full reads right now */
+	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
+		mutex_unlock(&mce_read_mutex);
+		kfree(cpu_tsc);
+
+		return -EINVAL;
+	}
+
+	err = 0;
+	prev = 0;
+	do {
+		for (i = prev; i < next; i++) {
+			unsigned long start = jiffies;
+
+			while (!mcelog.entry[i].finished) {
+				if (time_after_eq(jiffies, start + 2)) {
+					memset(mcelog.entry + i, 0,
+					       sizeof(struct mce));
+					goto timeout;
+				}
+				cpu_relax();
+			}
+			smp_rmb();
+			err |= copy_to_user(buf, mcelog.entry + i,
+					    sizeof(struct mce));
+			buf += sizeof(struct mce);
+timeout:
+			;
+		}
+
+		memset(mcelog.entry + prev, 0,
+		       (next - prev) * sizeof(struct mce));
+		prev = next;
+		next = cmpxchg(&mcelog.next, prev, 0);
+	} while (next != prev);
+
+	synchronize_sched();
+
+	/*
+	 * Collect entries that were still getting written before the
+	 * synchronize.
+	 */
+	on_each_cpu(collect_tscs, cpu_tsc, 1);
+
+	for (i = next; i < MCE_LOG_LEN; i++) {
+		if (mcelog.entry[i].finished &&
+		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
+			err |= copy_to_user(buf, mcelog.entry+i,
+					    sizeof(struct mce));
+			smp_rmb();
+			buf += sizeof(struct mce);
+			memset(&mcelog.entry[i], 0, sizeof(struct mce));
+		}
+	}
+	mutex_unlock(&mce_read_mutex);
+	kfree(cpu_tsc);
+
+	return err ? -EFAULT : buf - ubuf;
+}
+
+static unsigned int mce_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &mce_wait, wait);
+	if (rcu_dereference(mcelog.next))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+	int __user *p = (int __user *)arg;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	switch (cmd) {
+	case MCE_GET_RECORD_LEN:
+		return put_user(sizeof(struct mce), p);
+	case MCE_GET_LOG_LEN:
+		return put_user(MCE_LOG_LEN, p);
+	case MCE_GETCLEAR_FLAGS: {
+		unsigned flags;
+
+		do {
+			flags = mcelog.flags;
+		} while (cmpxchg(&mcelog.flags, flags, 0) != flags);
+
+		return put_user(flags, p);
+	}
+	default:
+		return -ENOTTY;
+	}
+}
+
+/* Modified in mce-inject.c, so not static or const */
+struct file_operations mce_chrdev_ops = {
+	.open			= mce_open,
+	.release		= mce_release,
+	.read			= mce_read,
+	.poll			= mce_poll,
+	.unlocked_ioctl		= mce_ioctl,
+};
+EXPORT_SYMBOL_GPL(mce_chrdev_ops);
+
+static struct miscdevice mce_log_device = {
+	MISC_MCELOG_MINOR,
+	"mcelog",
+	&mce_chrdev_ops,
+};
+
+/*
+ * mce=off Disables machine check
+ * mce=no_cmci Disables CMCI
+ * mce=dont_log_ce Clears corrected events silently, no log created for CEs.
+ * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared.
+ * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above)
+ *	monarchtimeout is how long to wait for other CPUs on machine
+ *	check, or 0 to not wait
+ * mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
+ * mce=nobootlog Don't log MCEs from before booting.
+ */
+static int __init mcheck_enable(char *str)
+{
+	if (*str == 0)
+		enable_p5_mce();
+	if (*str == '=')
+		str++;
+	if (!strcmp(str, "off"))
+		mce_disabled = 1;
+	else if (!strcmp(str, "no_cmci"))
+		mce_cmci_disabled = 1;
+	else if (!strcmp(str, "dont_log_ce"))
+		mce_dont_log_ce = 1;
+	else if (!strcmp(str, "ignore_ce"))
+		mce_ignore_ce = 1;
+	else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
+		mce_bootlog = (str[0] == 'b');
+	else if (isdigit(str[0])) {
+		get_option(&str, &tolerant);
+		if (*str == ',') {
+			++str;
+			get_option(&str, &monarch_timeout);
+		}
+	} else {
+		printk(KERN_INFO "mce argument %s ignored. Please use /sys\n",
+		       str);
+		return 0;
+	}
+	return 1;
+}
+__setup("mce", mcheck_enable);
+
+/*
+ * Sysfs support
+ */
+
+/*
+ * Disable machine checks on suspend and shutdown. We can't really handle
+ * them later.
+ */
+static int mce_disable(void)
+{
+	int i;
+
+	for (i = 0; i < banks; i++) {
+		if (!skip_bank_init(i))
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+	}
+	return 0;
+}
+
+static int mce_suspend(struct sys_device *dev, pm_message_t state)
+{
+	return mce_disable();
+}
+
+static int mce_shutdown(struct sys_device *dev)
+{
+	return mce_disable();
+}
+
+/*
+ * On resume clear all MCE state. Don't want to see leftovers from the BIOS.
+ * Only one CPU is active at this time, the others get re-added later using
+ * CPU hotplug:
+ */
+static int mce_resume(struct sys_device *dev)
+{
+	mce_init();
+	mce_cpu_features(&current_cpu_data);
+
+	return 0;
+}
+
+static void mce_cpu_restart(void *data)
+{
+	del_timer_sync(&__get_cpu_var(mce_timer));
+	if (mce_available(&current_cpu_data))
+		mce_init();
+	mce_init_timer();
+}
+
+/* Reinit MCEs after user configuration changes */
+static void mce_restart(void)
+{
+	on_each_cpu(mce_cpu_restart, NULL, 1);
+}
+
+static struct sysdev_class mce_sysclass = {
+	.suspend	= mce_suspend,
+	.shutdown	= mce_shutdown,
+	.resume		= mce_resume,
+	.name		= "machinecheck",
+};
+
+DEFINE_PER_CPU(struct sys_device, mce_dev);
+
+__cpuinitdata
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+static struct sysdev_attribute *bank_attrs;
+
+static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
+			 char *buf)
+{
+	u64 b = bank[attr - bank_attrs];
+
+	return sprintf(buf, "%llx\n", b);
+}
+
+static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
+			const char *buf, size_t size)
+{
+	u64 new;
+
+	if (strict_strtoull(buf, 0, &new) < 0)
+		return -EINVAL;
+
+	bank[attr - bank_attrs] = new;
+	mce_restart();
+
+	return size;
+}
+
+static ssize_t
+show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf)
+{
+	strcpy(buf, trigger);
+	strcat(buf, "\n");
+	return strlen(trigger) + 1;
+}
+
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				const char *buf, size_t siz)
+{
+	char *p;
+	int len;
+
+	strncpy(trigger, buf, sizeof(trigger));
+	trigger[sizeof(trigger)-1] = 0;
+	len = strlen(trigger);
+	p = strchr(trigger, '\n');
+
+	if (*p)
+		*p = 0;
+
+	return len;
+}
+
+static ssize_t store_int_with_restart(struct sys_device *s,
+				      struct sysdev_attribute *attr,
+				      const char *buf, size_t size)
+{
+	ssize_t ret = sysdev_store_int(s, attr, buf, size);
+	mce_restart();
+	return ret;
+}
+
+static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
+static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
+
+static struct sysdev_ext_attribute attr_check_interval = {
+	_SYSDEV_ATTR(check_interval, 0644, sysdev_show_int,
+		     store_int_with_restart),
+	&check_interval
+};
+
+static struct sysdev_attribute *mce_attrs[] = {
+	&attr_tolerant.attr, &attr_check_interval.attr, &attr_trigger,
+	&attr_monarch_timeout.attr,
+	NULL
+};
+
+static cpumask_var_t mce_dev_initialized;
+
+/* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */
+static __cpuinit int mce_create_device(unsigned int cpu)
+{
+	int err;
+	int i;
+
+	if (!mce_available(&boot_cpu_data))
+		return -EIO;
+
+	memset(&per_cpu(mce_dev, cpu).kobj, 0, sizeof(struct kobject));
+	per_cpu(mce_dev, cpu).id	= cpu;
+	per_cpu(mce_dev, cpu).cls	= &mce_sysclass;
+
+	err = sysdev_register(&per_cpu(mce_dev, cpu));
+	if (err)
+		return err;
+
+	for (i = 0; mce_attrs[i]; i++) {
+		err = sysdev_create_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+		if (err)
+			goto error;
+	}
+	for (i = 0; i < banks; i++) {
+		err = sysdev_create_file(&per_cpu(mce_dev, cpu),
+					&bank_attrs[i]);
+		if (err)
+			goto error2;
+	}
+	cpumask_set_cpu(cpu, mce_dev_initialized);
+
+	return 0;
+error2:
+	while (--i >= 0)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+error:
+	while (--i >= 0)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+
+	sysdev_unregister(&per_cpu(mce_dev, cpu));
+
+	return err;
+}
+
+static __cpuinit void mce_remove_device(unsigned int cpu)
+{
+	int i;
+
+	if (!cpumask_test_cpu(cpu, mce_dev_initialized))
+		return;
+
+	for (i = 0; mce_attrs[i]; i++)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+
+	for (i = 0; i < banks; i++)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+
+	sysdev_unregister(&per_cpu(mce_dev, cpu));
+	cpumask_clear_cpu(cpu, mce_dev_initialized);
+}
+
+/* Make sure there are no machine checks on offlined CPUs. */
+static void mce_disable_cpu(void *h)
+{
+	unsigned long action = *(unsigned long *)h;
+	int i;
+
+	if (!mce_available(&current_cpu_data))
+		return;
+	if (!(action & CPU_TASKS_FROZEN))
+		cmci_clear();
+	for (i = 0; i < banks; i++) {
+		if (!skip_bank_init(i))
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+	}
+}
+
+static void mce_reenable_cpu(void *h)
+{
+	unsigned long action = *(unsigned long *)h;
+	int i;
+
+	if (!mce_available(&current_cpu_data))
+		return;
+
+	if (!(action & CPU_TASKS_FROZEN))
+		cmci_reenable();
+	for (i = 0; i < banks; i++) {
+		if (!skip_bank_init(i))
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
+	}
+}
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static int __cpuinit
+mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct timer_list *t = &per_cpu(mce_timer, cpu);
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		mce_create_device(cpu);
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
+		break;
+	case CPU_DEAD:
+	case CPU_DEAD_FROZEN:
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
+		mce_remove_device(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		del_timer_sync(t);
+		smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
+		break;
+	case CPU_DOWN_FAILED:
+	case CPU_DOWN_FAILED_FROZEN:
+		t->expires = round_jiffies(jiffies +
+						__get_cpu_var(next_interval));
+		add_timer_on(t, cpu);
+		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
+		break;
+	case CPU_POST_DEAD:
+		/* intentionally ignoring frozen here */
+		cmci_rediscover(cpu);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mce_cpu_notifier __cpuinitdata = {
+	.notifier_call = mce_cpu_callback,
+};
+
+static __init int mce_init_banks(void)
+{
+	int i;
+
+	bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
+				GFP_KERNEL);
+	if (!bank_attrs)
+		return -ENOMEM;
+
+	for (i = 0; i < banks; i++) {
+		struct sysdev_attribute *a = &bank_attrs[i];
+
+		a->attr.name	= kasprintf(GFP_KERNEL, "bank%d", i);
+		if (!a->attr.name)
+			goto nomem;
+
+		a->attr.mode	= 0644;
+		a->show		= show_bank;
+		a->store	= set_bank;
+	}
+	return 0;
+
+nomem:
+	while (--i >= 0)
+		kfree(bank_attrs[i].attr.name);
+	kfree(bank_attrs);
+	bank_attrs = NULL;
+
+	return -ENOMEM;
+}
+
+static __init int mce_init_device(void)
+{
+	int err;
+	int i = 0;
+
+	if (!mce_available(&boot_cpu_data))
+		return -EIO;
+
+	alloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
+
+	err = mce_init_banks();
+	if (err)
+		return err;
+
+	err = sysdev_class_register(&mce_sysclass);
+	if (err)
+		return err;
+
+	for_each_online_cpu(i) {
+		err = mce_create_device(i);
+		if (err)
+			return err;
+	}
+
+	register_hotcpu_notifier(&mce_cpu_notifier);
+	misc_register(&mce_log_device);
+
+	return err;
+}
+
+device_initcall(mce_init_device);
+
+#else /* CONFIG_X86_OLD_MCE: */
+
+int nr_mce_banks;
+EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
+
+/* This has to be run for each processor */
+void mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled == 1)
+		return;
+
+	switch (c->x86_vendor) {
+	case X86_VENDOR_AMD:
+		amd_mcheck_init(c);
+		break;
+
+	case X86_VENDOR_INTEL:
+		if (c->x86 == 5)
+			intel_p5_mcheck_init(c);
+		if (c->x86 == 6)
+			intel_p6_mcheck_init(c);
+		if (c->x86 == 15)
+			intel_p4_mcheck_init(c);
+		break;
+
+	case X86_VENDOR_CENTAUR:
+		if (c->x86 == 5)
+			winchip_mcheck_init(c);
+		break;
+
+	default:
+		break;
+	}
+	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
+}
+
+static int __init mcheck_enable(char *str)
+{
+	mce_disabled = -1;
+	return 1;
+}
+
+__setup("mce", mcheck_enable);
+
+#endif /* CONFIG_X86_OLD_MCE */
+
+/*
+ * Old style boot options parsing. Only for compatibility.
+ */
+static int __init mcheck_disable(char *str)
+{
+	mce_disabled = 1;
+	return 1;
+}
+__setup("nomce", mcheck_disable);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h
index ae9f628838f..84a552b458c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.h
+++ b/arch/x86/kernel/cpu/mcheck/mce.h
@@ -1,14 +1,38 @@
 #include <linux/init.h>
 #include <asm/mce.h>
 
+#ifdef CONFIG_X86_OLD_MCE
 void amd_mcheck_init(struct cpuinfo_x86 *c);
 void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+#endif
+
+#ifdef CONFIG_X86_ANCIENT_MCE
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void winchip_mcheck_init(struct cpuinfo_x86 *c);
+extern int mce_p5_enable;
+static inline int mce_p5_enabled(void) { return mce_p5_enable; }
+static inline void enable_p5_mce(void) { mce_p5_enable = 1; }
+#else
+static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline int mce_p5_enabled(void) { return 0; }
+static inline void enable_p5_mce(void) { }
+#endif
 
 /* Call the installed machine check handler for this CPU setup. */
 extern void (*machine_check_vector)(struct pt_regs *, long error_code);
 
+#ifdef CONFIG_X86_OLD_MCE
+
 extern int nr_mce_banks;
 
+void intel_set_thermal_handler(void);
+
+#else
+
+static inline void intel_set_thermal_handler(void) { }
+
+#endif
+
+void intel_init_thermal(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_32.c b/arch/x86/kernel/cpu/mcheck/mce_32.c
deleted file mode 100644
index 3552119b091..00000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_32.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * mce.c - x86 Machine Check Exception Reporting
- * (c) 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>, Dave Jones <davej@redhat.com>
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/thread_info.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-
-#include "mce.h"
-
-int mce_disabled;
-int nr_mce_banks;
-
-EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
-
-/* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs *regs, long error_code)
-{
-	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
-}
-
-/* Call the installed machine check handler for this CPU setup. */
-void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
-
-/* This has to be run for each processor */
-void mcheck_init(struct cpuinfo_x86 *c)
-{
-	if (mce_disabled == 1)
-		return;
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		if (c->x86 == 5)
-			intel_p5_mcheck_init(c);
-		if (c->x86 == 6)
-			intel_p6_mcheck_init(c);
-		if (c->x86 == 15)
-			intel_p4_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		if (c->x86 == 5)
-			winchip_mcheck_init(c);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static int __init mcheck_disable(char *str)
-{
-	mce_disabled = 1;
-	return 1;
-}
-
-static int __init mcheck_enable(char *str)
-{
-	mce_disabled = -1;
-	return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
deleted file mode 100644
index 289cc481502..00000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ /dev/null
@@ -1,1188 +0,0 @@
-/*
- * Machine check handler.
- * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
- * Rest from unknown author(s).
- * 2004 Andi Kleen. Rewrote most of it.
- * Copyright 2008 Intel Corporation
- * Author: Andi Kleen
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/string.h>
-#include <linux/rcupdate.h>
-#include <linux/kallsyms.h>
-#include <linux/sysdev.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/cpu.h>
-#include <linux/percpu.h>
-#include <linux/poll.h>
-#include <linux/thread_info.h>
-#include <linux/ctype.h>
-#include <linux/kmod.h>
-#include <linux/kdebug.h>
-#include <linux/kobject.h>
-#include <linux/sysfs.h>
-#include <linux/ratelimit.h>
-#include <asm/processor.h>
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/idle.h>
-
-#define MISC_MCELOG_MINOR 227
-
-atomic_t mce_entry;
-
-static int mce_dont_init;
-
-/*
- * Tolerant levels:
- *   0: always panic on uncorrected errors, log corrected errors
- *   1: panic or SIGBUS on uncorrected errors, log corrected errors
- *   2: SIGBUS or log uncorrected errors (if possible), log corrected errors
- *   3: never panic or SIGBUS, log all errors (for testing only)
- */
-static int tolerant = 1;
-static int banks;
-static u64 *bank;
-static unsigned long notify_user;
-static int rip_msr;
-static int mce_bootlog = -1;
-static atomic_t mce_events;
-
-static char trigger[128];
-static char *trigger_argv[2] = { trigger, NULL };
-
-static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
-
-/* MCA banks polled by the period polling timer for corrected events */
-DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
-	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
-};
-
-/* Do initial initialization of a struct mce */
-void mce_setup(struct mce *m)
-{
-	memset(m, 0, sizeof(struct mce));
-	m->cpu = smp_processor_id();
-	rdtscll(m->tsc);
-}
-
-/*
- * Lockless MCE logging infrastructure.
- * This avoids deadlocks on printk locks without having to break locks. Also
- * separate MCEs from kernel messages to avoid bogus bug reports.
- */
-
-static struct mce_log mcelog = {
-	MCE_LOG_SIGNATURE,
-	MCE_LOG_LEN,
-};
-
-void mce_log(struct mce *mce)
-{
-	unsigned next, entry;
-	atomic_inc(&mce_events);
-	mce->finished = 0;
-	wmb();
-	for (;;) {
-		entry = rcu_dereference(mcelog.next);
-		for (;;) {
-			/* When the buffer fills up discard new entries. Assume
-			   that the earlier errors are the more interesting. */
-			if (entry >= MCE_LOG_LEN) {
-				set_bit(MCE_OVERFLOW, (unsigned long *)&mcelog.flags);
-				return;
-			}
-			/* Old left over entry. Skip. */
-			if (mcelog.entry[entry].finished) {
-				entry++;
-				continue;
-			}
-			break;
-		}
-		smp_rmb();
-		next = entry + 1;
-		if (cmpxchg(&mcelog.next, entry, next) == entry)
-			break;
-	}
-	memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
-	wmb();
-	mcelog.entry[entry].finished = 1;
-	wmb();
-
-	set_bit(0, &notify_user);
-}
-
-static void print_mce(struct mce *m)
-{
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "HARDWARE ERROR\n"
-	       KERN_EMERG
-	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
-	       m->cpu, m->mcgstatus, m->bank, m->status);
-	if (m->ip) {
-		printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
-		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
-		       m->cs, m->ip);
-		if (m->cs == __KERNEL_CS)
-			print_symbol("{%s}", m->ip);
-		printk("\n");
-	}
-	printk(KERN_EMERG "TSC %llx ", m->tsc);
-	if (m->addr)
-		printk("ADDR %llx ", m->addr);
-	if (m->misc)
-		printk("MISC %llx ", m->misc);
-	printk("\n");
-	printk(KERN_EMERG "This is not a software problem!\n");
-	printk(KERN_EMERG "Run through mcelog --ascii to decode "
-	       "and contact your hardware vendor\n");
-}
-
-static void mce_panic(char *msg, struct mce *backup, unsigned long start)
-{
-	int i;
-
-	oops_begin();
-	for (i = 0; i < MCE_LOG_LEN; i++) {
-		unsigned long tsc = mcelog.entry[i].tsc;
-
-		if (time_before(tsc, start))
-			continue;
-		print_mce(&mcelog.entry[i]);
-		if (backup && mcelog.entry[i].tsc == backup->tsc)
-			backup = NULL;
-	}
-	if (backup)
-		print_mce(backup);
-	panic(msg);
-}
-
-int mce_available(struct cpuinfo_x86 *c)
-{
-	if (mce_dont_init)
-		return 0;
-	return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
-}
-
-static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
-{
-	if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) {
-		m->ip = regs->ip;
-		m->cs = regs->cs;
-	} else {
-		m->ip = 0;
-		m->cs = 0;
-	}
-	if (rip_msr) {
-		/* Assume the RIP in the MSR is exact. Is this true? */
-		m->mcgstatus |= MCG_STATUS_EIPV;
-		rdmsrl(rip_msr, m->ip);
-		m->cs = 0;
-	}
-}
-
-/*
- * Poll for corrected events or events that happened before reset.
- * Those are just logged through /dev/mcelog.
- *
- * This is executed in standard interrupt context.
- */
-void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
-{
-	struct mce m;
-	int i;
-
-	mce_setup(&m);
-
-	rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
-	for (i = 0; i < banks; i++) {
-		if (!bank[i] || !test_bit(i, *b))
-			continue;
-
-		m.misc = 0;
-		m.addr = 0;
-		m.bank = i;
-		m.tsc = 0;
-
-		barrier();
-		rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
-		if (!(m.status & MCI_STATUS_VAL))
-			continue;
-
-		/*
-		 * Uncorrected events are handled by the exception handler
-		 * when it is enabled. But when the exception is disabled log
-		 * everything.
-		 *
-		 * TBD do the same check for MCI_STATUS_EN here?
-		 */
-		if ((m.status & MCI_STATUS_UC) && !(flags & MCP_UC))
-			continue;
-
-		if (m.status & MCI_STATUS_MISCV)
-			rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
-		if (m.status & MCI_STATUS_ADDRV)
-			rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
-		if (!(flags & MCP_TIMESTAMP))
-			m.tsc = 0;
-		/*
-		 * Don't get the IP here because it's unlikely to
-		 * have anything to do with the actual error location.
-		 */
-		if (!(flags & MCP_DONTLOG)) {
-			mce_log(&m);
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-
-		/*
-		 * Clear state for this bank.
-		 */
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}
-
-	/*
-	 * Don't clear MCG_STATUS here because it's only defined for
-	 * exceptions.
-	 */
-}
-
-/*
- * The actual machine check handler. This only handles real
- * exceptions when something got corrupted coming in through int 18.
- *
- * This is executed in NMI context not subject to normal locking rules. This
- * implies that most kernel services cannot be safely used. Don't even
- * think about putting a printk in there!
- */
-void do_machine_check(struct pt_regs * regs, long error_code)
-{
-	struct mce m, panicm;
-	u64 mcestart = 0;
-	int i;
-	int panicm_found = 0;
-	/*
-	 * If no_way_out gets set, there is no safe way to recover from this
-	 * MCE.  If tolerant is cranked up, we'll try anyway.
-	 */
-	int no_way_out = 0;
-	/*
-	 * If kill_it gets set, there might be a way to recover from this
-	 * error.
-	 */
-	int kill_it = 0;
-	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
-
-	atomic_inc(&mce_entry);
-
-	if (notify_die(DIE_NMI, "machine check", regs, error_code,
-			   18, SIGKILL) == NOTIFY_STOP)
-		goto out2;
-	if (!banks)
-		goto out2;
-
-	mce_setup(&m);
-
-	rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
-	/* if the restart IP is not valid, we're done for */
-	if (!(m.mcgstatus & MCG_STATUS_RIPV))
-		no_way_out = 1;
-
-	rdtscll(mcestart);
-	barrier();
-
-	for (i = 0; i < banks; i++) {
-		__clear_bit(i, toclear);
-		if (!bank[i])
-			continue;
-
-		m.misc = 0;
-		m.addr = 0;
-		m.bank = i;
-
-		rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
-		if ((m.status & MCI_STATUS_VAL) == 0)
-			continue;
-
-		/*
-		 * Non uncorrected errors are handled by machine_check_poll
-		 * Leave them alone.
-		 */
-		if ((m.status & MCI_STATUS_UC) == 0)
-			continue;
-
-		/*
-		 * Set taint even when machine check was not enabled.
-		 */
-		add_taint(TAINT_MACHINE_CHECK);
-
-		__set_bit(i, toclear);
-
-		if (m.status & MCI_STATUS_EN) {
-			/* if PCC was set, there's no way out */
-			no_way_out |= !!(m.status & MCI_STATUS_PCC);
-			/*
-			 * If this error was uncorrectable and there was
-			 * an overflow, we're in trouble.  If no overflow,
-			 * we might get away with just killing a task.
-			 */
-			if (m.status & MCI_STATUS_UC) {
-				if (tolerant < 1 || m.status & MCI_STATUS_OVER)
-					no_way_out = 1;
-				kill_it = 1;
-			}
-		} else {
-			/*
-			 * Machine check event was not enabled. Clear, but
-			 * ignore.
-			 */
-			continue;
-		}
-
-		if (m.status & MCI_STATUS_MISCV)
-			rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
-		if (m.status & MCI_STATUS_ADDRV)
-			rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
-		mce_get_rip(&m, regs);
-		mce_log(&m);
-
-		/* Did this bank cause the exception? */
-		/* Assume that the bank with uncorrectable errors did it,
-		   and that there is only a single one. */
-		if ((m.status & MCI_STATUS_UC) && (m.status & MCI_STATUS_EN)) {
-			panicm = m;
-			panicm_found = 1;
-		}
-	}
-
-	/* If we didn't find an uncorrectable error, pick
-	   the last one (shouldn't happen, just being safe). */
-	if (!panicm_found)
-		panicm = m;
-
-	/*
-	 * If we have decided that we just CAN'T continue, and the user
-	 *  has not set tolerant to an insane level, give up and die.
-	 */
-	if (no_way_out && tolerant < 3)
-		mce_panic("Machine check", &panicm, mcestart);
-
-	/*
-	 * If the error seems to be unrecoverable, something should be
-	 * done.  Try to kill as little as possible.  If we can kill just
-	 * one task, do that.  If the user has set the tolerance very
-	 * high, don't try to do anything at all.
-	 */
-	if (kill_it && tolerant < 3) {
-		int user_space = 0;
-
-		/*
-		 * If the EIPV bit is set, it means the saved IP is the
-		 * instruction which caused the MCE.
-		 */
-		if (m.mcgstatus & MCG_STATUS_EIPV)
-			user_space = panicm.ip && (panicm.cs & 3);
-
-		/*
-		 * If we know that the error was in user space, send a
-		 * SIGBUS.  Otherwise, panic if tolerance is low.
-		 *
-		 * force_sig() takes an awful lot of locks and has a slight
-		 * risk of deadlocking.
-		 */
-		if (user_space) {
-			force_sig(SIGBUS, current);
-		} else if (panic_on_oops || tolerant < 2) {
-			mce_panic("Uncorrected machine check",
-				&panicm, mcestart);
-		}
-	}
-
-	/* notify userspace ASAP */
-	set_thread_flag(TIF_MCE_NOTIFY);
-
-	/* the last thing we do is clear state */
-	for (i = 0; i < banks; i++) {
-		if (test_bit(i, toclear))
-			wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}
-	wrmsrl(MSR_IA32_MCG_STATUS, 0);
- out2:
-	atomic_dec(&mce_entry);
-}
-EXPORT_SYMBOL_GPL(do_machine_check);
-
-#ifdef CONFIG_X86_MCE_INTEL
-/***
- * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
- * @cpu: The CPU on which the event occurred.
- * @status: Event status information
- *
- * This function should be called by the thermal interrupt after the
- * event has been processed and the decision was made to log the event
- * further.
- *
- * The status parameter will be saved to the 'status' field of 'struct mce'
- * and historically has been the register value of the
- * MSR_IA32_THERMAL_STATUS (Intel) msr.
- */
-void mce_log_therm_throt_event(__u64 status)
-{
-	struct mce m;
-
-	mce_setup(&m);
-	m.bank = MCE_THERMAL_BANK;
-	m.status = status;
-	mce_log(&m);
-}
-#endif /* CONFIG_X86_MCE_INTEL */
-
-/*
- * Periodic polling timer for "silent" machine check errors.  If the
- * poller finds an MCE, poll 2x faster.  When the poller finds no more
- * errors, poll 2x slower (up to check_interval seconds).
- */
-
-static int check_interval = 5 * 60; /* 5 minutes */
-static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
-static void mcheck_timer(unsigned long);
-static DEFINE_PER_CPU(struct timer_list, mce_timer);
-
-static void mcheck_timer(unsigned long data)
-{
-	struct timer_list *t = &per_cpu(mce_timer, data);
-	int *n;
-
-	WARN_ON(smp_processor_id() != data);
-
-	if (mce_available(&current_cpu_data))
-		machine_check_poll(MCP_TIMESTAMP,
-				&__get_cpu_var(mce_poll_banks));
-
-	/*
-	 * Alert userspace if needed.  If we logged an MCE, reduce the
-	 * polling interval, otherwise increase the polling interval.
-	 */
-	n = &__get_cpu_var(next_interval);
-	if (mce_notify_user()) {
-		*n = max(*n/2, HZ/100);
-	} else {
-		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
-	}
-
-	t->expires = jiffies + *n;
-	add_timer(t);
-}
-
-static void mce_do_trigger(struct work_struct *work)
-{
-	call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
-}
-
-static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
-
-/*
- * Notify the user(s) about new machine check events.
- * Can be called from interrupt context, but not from machine check/NMI
- * context.
- */
-int mce_notify_user(void)
-{
-	/* Not more than two messages every minute */
-	static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2);
-
-	clear_thread_flag(TIF_MCE_NOTIFY);
-	if (test_and_clear_bit(0, &notify_user)) {
-		wake_up_interruptible(&mce_wait);
-
-		/*
-		 * There is no risk of missing notifications because
-		 * work_pending is always cleared before the function is
-		 * executed.
-		 */
-		if (trigger[0] && !work_pending(&mce_trigger_work))
-			schedule_work(&mce_trigger_work);
-
-		if (__ratelimit(&ratelimit))
-			printk(KERN_INFO "Machine check events logged\n");
-
-		return 1;
-	}
-	return 0;
-}
-
-/* see if the idle task needs to notify userspace */
-static int
-mce_idle_callback(struct notifier_block *nfb, unsigned long action, void *junk)
-{
-	/* IDLE_END should be safe - interrupts are back on */
-	if (action == IDLE_END && test_thread_flag(TIF_MCE_NOTIFY))
-		mce_notify_user();
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mce_idle_notifier = {
-	.notifier_call = mce_idle_callback,
-};
-
-static __init int periodic_mcheck_init(void)
-{
-       idle_notifier_register(&mce_idle_notifier);
-       return 0;
-}
-__initcall(periodic_mcheck_init);
-
-/*
- * Initialize Machine Checks for a CPU.
- */
-static int mce_cap_init(void)
-{
-	u64 cap;
-	unsigned b;
-
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	b = cap & 0xff;
-	if (b > MAX_NR_BANKS) {
-		printk(KERN_WARNING
-		       "MCE: Using only %u machine check banks out of %u\n",
-			MAX_NR_BANKS, b);
-		b = MAX_NR_BANKS;
-	}
-
-	/* Don't support asymmetric configurations today */
-	WARN_ON(banks != 0 && b != banks);
-	banks = b;
-	if (!bank) {
-		bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
-		if (!bank)
-			return -ENOMEM;
-		memset(bank, 0xff, banks * sizeof(u64));
-	}
-
-	/* Use accurate RIP reporting if available. */
-	if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9)
-		rip_msr = MSR_IA32_MCG_EIP;
-
-	return 0;
-}
-
-static void mce_init(void *dummy)
-{
-	u64 cap;
-	int i;
-	mce_banks_t all_banks;
-
-	/*
-	 * Log the machine checks left over from the previous reset.
-	 */
-	bitmap_fill(all_banks, MAX_NR_BANKS);
-	machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
-
-	set_in_cr4(X86_CR4_MCE);
-
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	if (cap & MCG_CTL_P)
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-
-	for (i = 0; i < banks; i++) {
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}
-}
-
-/* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
-{
-	/* This should be disabled by the BIOS, but isn't always */
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		if (c->x86 == 15 && banks > 4)
-			/* disable GART TBL walk error reporting, which trips off
-			   incorrectly with the IOMMU & 3ware & Cerberus. */
-			clear_bit(10, (unsigned long *)&bank[4]);
-		if(c->x86 <= 17 && mce_bootlog < 0)
-			/* Lots of broken BIOS around that don't clear them
-			   by default and leave crap in there. Don't log. */
-			mce_bootlog = 0;
-	}
-
-}
-
-static void mce_cpu_features(struct cpuinfo_x86 *c)
-{
-	switch (c->x86_vendor) {
-	case X86_VENDOR_INTEL:
-		mce_intel_feature_init(c);
-		break;
-	case X86_VENDOR_AMD:
-		mce_amd_feature_init(c);
-		break;
-	default:
-		break;
-	}
-}
-
-static void mce_init_timer(void)
-{
-	struct timer_list *t = &__get_cpu_var(mce_timer);
-	int *n = &__get_cpu_var(next_interval);
-
-	*n = check_interval * HZ;
-	if (!*n)
-		return;
-	setup_timer(t, mcheck_timer, smp_processor_id());
-	t->expires = round_jiffies(jiffies + *n);
-	add_timer(t);
-}
-
-/*
- * Called for each booted CPU to set up machine checks.
- * Must be called with preempt off.
- */
-void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
-{
-	if (!mce_available(c))
-		return;
-
-	if (mce_cap_init() < 0) {
-		mce_dont_init = 1;
-		return;
-	}
-	mce_cpu_quirks(c);
-
-	mce_init(NULL);
-	mce_cpu_features(c);
-	mce_init_timer();
-}
-
-/*
- * Character device to read and clear the MCE log.
- */
-
-static DEFINE_SPINLOCK(mce_state_lock);
-static int open_count;	/* #times opened */
-static int open_exclu;	/* already open exclusive? */
-
-static int mce_open(struct inode *inode, struct file *file)
-{
-	lock_kernel();
-	spin_lock(&mce_state_lock);
-
-	if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
-		spin_unlock(&mce_state_lock);
-		unlock_kernel();
-		return -EBUSY;
-	}
-
-	if (file->f_flags & O_EXCL)
-		open_exclu = 1;
-	open_count++;
-
-	spin_unlock(&mce_state_lock);
-	unlock_kernel();
-
-	return nonseekable_open(inode, file);
-}
-
-static int mce_release(struct inode *inode, struct file *file)
-{
-	spin_lock(&mce_state_lock);
-
-	open_count--;
-	open_exclu = 0;
-
-	spin_unlock(&mce_state_lock);
-
-	return 0;
-}
-
-static void collect_tscs(void *data)
-{
-	unsigned long *cpu_tsc = (unsigned long *)data;
-
-	rdtscll(cpu_tsc[smp_processor_id()]);
-}
-
-static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
-			loff_t *off)
-{
-	unsigned long *cpu_tsc;
-	static DEFINE_MUTEX(mce_read_mutex);
-	unsigned prev, next;
-	char __user *buf = ubuf;
-	int i, err;
-
-	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
-	if (!cpu_tsc)
-		return -ENOMEM;
-
-	mutex_lock(&mce_read_mutex);
-	next = rcu_dereference(mcelog.next);
-
-	/* Only supports full reads right now */
-	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
-		mutex_unlock(&mce_read_mutex);
-		kfree(cpu_tsc);
-		return -EINVAL;
-	}
-
-	err = 0;
-	prev = 0;
-	do {
-		for (i = prev; i < next; i++) {
-			unsigned long start = jiffies;
-
-			while (!mcelog.entry[i].finished) {
-				if (time_after_eq(jiffies, start + 2)) {
-					memset(mcelog.entry + i, 0,
-					       sizeof(struct mce));
-					goto timeout;
-				}
-				cpu_relax();
-			}
-			smp_rmb();
-			err |= copy_to_user(buf, mcelog.entry + i,
-					    sizeof(struct mce));
-			buf += sizeof(struct mce);
-timeout:
-			;
-		}
-
-		memset(mcelog.entry + prev, 0,
-		       (next - prev) * sizeof(struct mce));
-		prev = next;
-		next = cmpxchg(&mcelog.next, prev, 0);
-	} while (next != prev);
-
-	synchronize_sched();
-
-	/*
-	 * Collect entries that were still getting written before the
-	 * synchronize.
-	 */
-	on_each_cpu(collect_tscs, cpu_tsc, 1);
-	for (i = next; i < MCE_LOG_LEN; i++) {
-		if (mcelog.entry[i].finished &&
-		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
-			err |= copy_to_user(buf, mcelog.entry+i,
-					    sizeof(struct mce));
-			smp_rmb();
-			buf += sizeof(struct mce);
-			memset(&mcelog.entry[i], 0, sizeof(struct mce));
-		}
-	}
-	mutex_unlock(&mce_read_mutex);
-	kfree(cpu_tsc);
-	return err ? -EFAULT : buf - ubuf;
-}
-
-static unsigned int mce_poll(struct file *file, poll_table *wait)
-{
-	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference(mcelog.next))
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
-{
-	int __user *p = (int __user *)arg;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	switch (cmd) {
-	case MCE_GET_RECORD_LEN:
-		return put_user(sizeof(struct mce), p);
-	case MCE_GET_LOG_LEN:
-		return put_user(MCE_LOG_LEN, p);
-	case MCE_GETCLEAR_FLAGS: {
-		unsigned flags;
-
-		do {
-			flags = mcelog.flags;
-		} while (cmpxchg(&mcelog.flags, flags, 0) != flags);
-		return put_user(flags, p);
-	}
-	default:
-		return -ENOTTY;
-	}
-}
-
-static const struct file_operations mce_chrdev_ops = {
-	.open = mce_open,
-	.release = mce_release,
-	.read = mce_read,
-	.poll = mce_poll,
-	.unlocked_ioctl = mce_ioctl,
-};
-
-static struct miscdevice mce_log_device = {
-	MISC_MCELOG_MINOR,
-	"mcelog",
-	&mce_chrdev_ops,
-};
-
-/*
- * Old style boot options parsing. Only for compatibility.
- */
-static int __init mcheck_disable(char *str)
-{
-	mce_dont_init = 1;
-	return 1;
-}
-
-/* mce=off disables machine check.
-   mce=TOLERANCELEVEL (number, see above)
-   mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
-   mce=nobootlog Don't log MCEs from before booting. */
-static int __init mcheck_enable(char *str)
-{
-	if (!strcmp(str, "off"))
-		mce_dont_init = 1;
-	else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog"))
-		mce_bootlog = str[0] == 'b';
-	else if (isdigit(str[0]))
-		get_option(&str, &tolerant);
-	else
-		printk("mce= argument %s ignored. Please use /sys", str);
-	return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce=", mcheck_enable);
-
-/*
- * Sysfs support
- */
-
-/*
- * Disable machine checks on suspend and shutdown. We can't really handle
- * them later.
- */
-static int mce_disable(void)
-{
-	int i;
-
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
-	return 0;
-}
-
-static int mce_suspend(struct sys_device *dev, pm_message_t state)
-{
-	return mce_disable();
-}
-
-static int mce_shutdown(struct sys_device *dev)
-{
-	return mce_disable();
-}
-
-/* On resume clear all MCE state. Don't want to see leftovers from the BIOS.
-   Only one CPU is active at this time, the others get readded later using
-   CPU hotplug. */
-static int mce_resume(struct sys_device *dev)
-{
-	mce_init(NULL);
-	mce_cpu_features(&current_cpu_data);
-	return 0;
-}
-
-static void mce_cpu_restart(void *data)
-{
-	del_timer_sync(&__get_cpu_var(mce_timer));
-	if (mce_available(&current_cpu_data))
-		mce_init(NULL);
-	mce_init_timer();
-}
-
-/* Reinit MCEs after user configuration changes */
-static void mce_restart(void)
-{
-	on_each_cpu(mce_cpu_restart, NULL, 1);
-}
-
-static struct sysdev_class mce_sysclass = {
-	.suspend = mce_suspend,
-	.shutdown = mce_shutdown,
-	.resume = mce_resume,
-	.name = "machinecheck",
-};
-
-DEFINE_PER_CPU(struct sys_device, device_mce);
-void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
-
-/* Why are there no generic functions for this? */
-#define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s,		\
-				     struct sysdev_attribute *attr,	\
-				     char *buf) {			\
-		return sprintf(buf, "%lx\n", (unsigned long)var);	\
-	}								\
-	static ssize_t set_ ## name(struct sys_device *s,		\
-				    struct sysdev_attribute *attr,	\
-				    const char *buf, size_t siz) {	\
-		char *end;						\
-		unsigned long new = simple_strtoul(buf, &end, 0);	\
-		if (end == buf) return -EINVAL;				\
-		var = new;						\
-		start;							\
-		return end-buf;						\
-	}								\
-	static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
-
-static struct sysdev_attribute *bank_attrs;
-
-static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
-			 char *buf)
-{
-	u64 b = bank[attr - bank_attrs];
-	return sprintf(buf, "%llx\n", b);
-}
-
-static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
-			const char *buf, size_t siz)
-{
-	char *end;
-	u64 new = simple_strtoull(buf, &end, 0);
-	if (end == buf)
-		return -EINVAL;
-	bank[attr - bank_attrs] = new;
-	mce_restart();
-	return end-buf;
-}
-
-static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
-				char *buf)
-{
-	strcpy(buf, trigger);
-	strcat(buf, "\n");
-	return strlen(trigger) + 1;
-}
-
-static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
-				const char *buf,size_t siz)
-{
-	char *p;
-	int len;
-	strncpy(trigger, buf, sizeof(trigger));
-	trigger[sizeof(trigger)-1] = 0;
-	len = strlen(trigger);
-	p = strchr(trigger, '\n');
-	if (*p) *p = 0;
-	return len;
-}
-
-static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
-ACCESSOR(check_interval,check_interval,mce_restart())
-static struct sysdev_attribute *mce_attributes[] = {
-	&attr_tolerant.attr, &attr_check_interval, &attr_trigger,
-	NULL
-};
-
-static cpumask_var_t mce_device_initialized;
-
-/* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
-static __cpuinit int mce_create_device(unsigned int cpu)
-{
-	int err;
-	int i;
-
-	if (!mce_available(&boot_cpu_data))
-		return -EIO;
-
-	memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
-	per_cpu(device_mce,cpu).id = cpu;
-	per_cpu(device_mce,cpu).cls = &mce_sysclass;
-
-	err = sysdev_register(&per_cpu(device_mce,cpu));
-	if (err)
-		return err;
-
-	for (i = 0; mce_attributes[i]; i++) {
-		err = sysdev_create_file(&per_cpu(device_mce,cpu),
-					 mce_attributes[i]);
-		if (err)
-			goto error;
-	}
-	for (i = 0; i < banks; i++) {
-		err = sysdev_create_file(&per_cpu(device_mce, cpu),
-					&bank_attrs[i]);
-		if (err)
-			goto error2;
-	}
-	cpumask_set_cpu(cpu, mce_device_initialized);
-
-	return 0;
-error2:
-	while (--i >= 0) {
-		sysdev_remove_file(&per_cpu(device_mce, cpu),
-					&bank_attrs[i]);
-	}
-error:
-	while (--i >= 0) {
-		sysdev_remove_file(&per_cpu(device_mce,cpu),
-				   mce_attributes[i]);
-	}
-	sysdev_unregister(&per_cpu(device_mce,cpu));
-
-	return err;
-}
-
-static __cpuinit void mce_remove_device(unsigned int cpu)
-{
-	int i;
-
-	if (!cpumask_test_cpu(cpu, mce_device_initialized))
-		return;
-
-	for (i = 0; mce_attributes[i]; i++)
-		sysdev_remove_file(&per_cpu(device_mce,cpu),
-			mce_attributes[i]);
-	for (i = 0; i < banks; i++)
-		sysdev_remove_file(&per_cpu(device_mce, cpu),
-			&bank_attrs[i]);
-	sysdev_unregister(&per_cpu(device_mce,cpu));
-	cpumask_clear_cpu(cpu, mce_device_initialized);
-}
-
-/* Make sure there are no machine checks on offlined CPUs. */
-static void mce_disable_cpu(void *h)
-{
-	int i;
-	unsigned long action = *(unsigned long *)h;
-
-	if (!mce_available(&current_cpu_data))
-		return;
-	if (!(action & CPU_TASKS_FROZEN))
-		cmci_clear();
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
-}
-
-static void mce_reenable_cpu(void *h)
-{
-	int i;
-	unsigned long action = *(unsigned long *)h;
-
-	if (!mce_available(&current_cpu_data))
-		return;
-	if (!(action & CPU_TASKS_FROZEN))
-		cmci_reenable();
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
-}
-
-/* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
-				      unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct timer_list *t = &per_cpu(mce_timer, cpu);
-
-	switch (action) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		mce_create_device(cpu);
-		if (threshold_cpu_callback)
-			threshold_cpu_callback(action, cpu);
-		break;
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		if (threshold_cpu_callback)
-			threshold_cpu_callback(action, cpu);
-		mce_remove_device(cpu);
-		break;
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-		del_timer_sync(t);
-		smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
-		break;
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies(jiffies +
-						__get_cpu_var(next_interval));
-		add_timer_on(t, cpu);
-		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
-		break;
-	case CPU_POST_DEAD:
-		/* intentionally ignoring frozen here */
-		cmci_rediscover(cpu);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mce_cpu_notifier __cpuinitdata = {
-	.notifier_call = mce_cpu_callback,
-};
-
-static __init int mce_init_banks(void)
-{
-	int i;
-
-	bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
-				GFP_KERNEL);
-	if (!bank_attrs)
-		return -ENOMEM;
-
-	for (i = 0; i < banks; i++) {
-		struct sysdev_attribute *a = &bank_attrs[i];
-		a->attr.name = kasprintf(GFP_KERNEL, "bank%d", i);
-		if (!a->attr.name)
-			goto nomem;
-		a->attr.mode = 0644;
-		a->show = show_bank;
-		a->store = set_bank;
-	}
-	return 0;
-
-nomem:
-	while (--i >= 0)
-		kfree(bank_attrs[i].attr.name);
-	kfree(bank_attrs);
-	bank_attrs = NULL;
-	return -ENOMEM;
-}
-
-static __init int mce_init_device(void)
-{
-	int err;
-	int i = 0;
-
-	if (!mce_available(&boot_cpu_data))
-		return -EIO;
-
-	zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
-
-	err = mce_init_banks();
-	if (err)
-		return err;
-
-	err = sysdev_class_register(&mce_sysclass);
-	if (err)
-		return err;
-
-	for_each_online_cpu(i) {
-		err = mce_create_device(i);
-		if (err)
-			return err;
-	}
-
-	register_hotcpu_notifier(&mce_cpu_notifier);
-	misc_register(&mce_log_device);
-	return err;
-}
-
-device_initcall(mce_init_device);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 56dde9c4bc9..ddae21620bd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -13,22 +13,22 @@
  *
  *  All MC4_MISCi registers are shared between multi-cores
  */
-
-#include <linux/cpu.h>
-#include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/kobject.h>
 #include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
+#include <linux/kobject.h>
+#include <linux/percpu.h>
 #include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/sysfs.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+
 #include <asm/apic.h>
+#include <asm/idle.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
-#include <asm/percpu.h>
-#include <asm/idle.h>
 
 #define PFX               "mce_threshold: "
 #define VERSION           "version 1.1.1"
@@ -48,26 +48,26 @@
 #define MCG_XBLK_ADDR     0xC0000400
 
 struct threshold_block {
-	unsigned int block;
-	unsigned int bank;
-	unsigned int cpu;
-	u32 address;
-	u16 interrupt_enable;
-	u16 threshold_limit;
-	struct kobject kobj;
-	struct list_head miscj;
+	unsigned int		block;
+	unsigned int		bank;
+	unsigned int		cpu;
+	u32			address;
+	u16			interrupt_enable;
+	u16			threshold_limit;
+	struct kobject		kobj;
+	struct list_head	miscj;
 };
 
 /* defaults used early on boot */
 static struct threshold_block threshold_defaults = {
-	.interrupt_enable = 0,
-	.threshold_limit = THRESHOLD_MAX,
+	.interrupt_enable	= 0,
+	.threshold_limit	= THRESHOLD_MAX,
 };
 
 struct threshold_bank {
-	struct kobject *kobj;
-	struct threshold_block *blocks;
-	cpumask_var_t cpus;
+	struct kobject		*kobj;
+	struct threshold_block	*blocks;
+	cpumask_var_t		cpus;
 };
 static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
 
@@ -86,9 +86,9 @@ static void amd_threshold_interrupt(void);
  */
 
 struct thresh_restart {
-	struct threshold_block *b;
-	int reset;
-	u16 old_limit;
+	struct threshold_block	*b;
+	int			reset;
+	u16			old_limit;
 };
 
 /* must be called with correct cpu affinity */
@@ -110,6 +110,7 @@ static void threshold_restart_bank(void *_tr)
 	} else if (tr->old_limit) {	/* change limit w/o reset */
 		int new_count = (mci_misc_hi & THRESHOLD_MAX) +
 		    (tr->old_limit - tr->b->threshold_limit);
+
 		mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) |
 		    (new_count & THRESHOLD_MAX);
 	}
@@ -125,11 +126,11 @@ static void threshold_restart_bank(void *_tr)
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
-	unsigned int bank, block;
 	unsigned int cpu = smp_processor_id();
-	u8 lvt_off;
 	u32 low = 0, high = 0, address = 0;
+	unsigned int bank, block;
 	struct thresh_restart tr;
+	u8 lvt_off;
 
 	for (bank = 0; bank < NR_BANKS; ++bank) {
 		for (block = 0; block < NR_BLOCKS; ++block) {
@@ -140,8 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 				if (!address)
 					break;
 				address += MCG_XBLK_ADDR;
-			}
-			else
+			} else
 				++address;
 
 			if (rdmsr_safe(address, &low, &high))
@@ -193,9 +193,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
  */
 static void amd_threshold_interrupt(void)
 {
+	u32 low = 0, high = 0, address = 0;
 	unsigned int bank, block;
 	struct mce m;
-	u32 low = 0, high = 0, address = 0;
 
 	mce_setup(&m);
 
@@ -204,16 +204,16 @@ static void amd_threshold_interrupt(void)
 		if (!(per_cpu(bank_map, m.cpu) & (1 << bank)))
 			continue;
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			if (block == 0)
+			if (block == 0) {
 				address = MSR_IA32_MC0_MISC + bank * 4;
-			else if (block == 1) {
+			} else if (block == 1) {
 				address = (low & MASK_BLKPTR_LO) >> 21;
 				if (!address)
 					break;
 				address += MCG_XBLK_ADDR;
-			}
-			else
+			} else {
 				++address;
+			}
 
 			if (rdmsr_safe(address, &low, &high))
 				break;
@@ -229,8 +229,10 @@ static void amd_threshold_interrupt(void)
 			     (high & MASK_LOCKED_HI))
 				continue;
 
-			/* Log the machine check that caused the threshold
-			   event. */
+			/*
+			 * Log the machine check that caused the threshold
+			 * event.
+			 */
 			machine_check_poll(MCP_TIMESTAMP,
 					&__get_cpu_var(mce_poll_banks));
 
@@ -254,48 +256,52 @@ static void amd_threshold_interrupt(void)
 
 struct threshold_attr {
 	struct attribute attr;
-	ssize_t(*show) (struct threshold_block *, char *);
-	ssize_t(*store) (struct threshold_block *, const char *, size_t count);
+	ssize_t (*show) (struct threshold_block *, char *);
+	ssize_t (*store) (struct threshold_block *, const char *, size_t count);
 };
 
-#define SHOW_FIELDS(name)                                           \
-static ssize_t show_ ## name(struct threshold_block * b, char *buf) \
-{                                                                   \
-        return sprintf(buf, "%lx\n", (unsigned long) b->name);      \
+#define SHOW_FIELDS(name)						\
+static ssize_t show_ ## name(struct threshold_block *b, char *buf)	\
+{									\
+	return sprintf(buf, "%lx\n", (unsigned long) b->name);		\
 }
 SHOW_FIELDS(interrupt_enable)
 SHOW_FIELDS(threshold_limit)
 
-static ssize_t store_interrupt_enable(struct threshold_block *b,
-				      const char *buf, size_t count)
+static ssize_t
+store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 {
-	char *end;
 	struct thresh_restart tr;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
+	unsigned long new;
+
+	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
+
 	b->interrupt_enable = !!new;
 
-	tr.b = b;
-	tr.reset = 0;
-	tr.old_limit = 0;
+	tr.b		= b;
+	tr.reset	= 0;
+	tr.old_limit	= 0;
+
 	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
 
-	return end - buf;
+	return size;
 }
 
-static ssize_t store_threshold_limit(struct threshold_block *b,
-				     const char *buf, size_t count)
+static ssize_t
+store_threshold_limit(struct threshold_block *b, const char *buf, size_t size)
 {
-	char *end;
 	struct thresh_restart tr;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
+	unsigned long new;
+
+	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
+
 	if (new > THRESHOLD_MAX)
 		new = THRESHOLD_MAX;
 	if (new < 1)
 		new = 1;
+
 	tr.old_limit = b->threshold_limit;
 	b->threshold_limit = new;
 	tr.b = b;
@@ -303,12 +309,12 @@ static ssize_t store_threshold_limit(struct threshold_block *b,
 
 	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
 
-	return end - buf;
+	return size;
 }
 
 struct threshold_block_cross_cpu {
-	struct threshold_block *tb;
-	long retval;
+	struct threshold_block	*tb;
+	long			retval;
 };
 
 static void local_error_count_handler(void *_tbcc)
@@ -338,16 +344,13 @@ static ssize_t store_error_count(struct threshold_block *b,
 	return 1;
 }
 
-#define THRESHOLD_ATTR(_name,_mode,_show,_store) {            \
-        .attr = {.name = __stringify(_name), .mode = _mode }, \
-        .show = _show,                                        \
-        .store = _store,                                      \
+#define RW_ATTR(val)							\
+static struct threshold_attr val = {					\
+	.attr	= {.name = __stringify(val), .mode = 0644 },		\
+	.show	= show_## val,						\
+	.store	= store_## val,						\
 };
 
-#define RW_ATTR(name)                                           \
-static struct threshold_attr name =                             \
-        THRESHOLD_ATTR(name, 0644, show_## name, store_## name)
-
 RW_ATTR(interrupt_enable);
 RW_ATTR(threshold_limit);
 RW_ATTR(error_count);
@@ -359,15 +362,17 @@ static struct attribute *default_attrs[] = {
 	NULL
 };
 
-#define to_block(k) container_of(k, struct threshold_block, kobj)
-#define to_attr(a) container_of(a, struct threshold_attr, attr)
+#define to_block(k)	container_of(k, struct threshold_block, kobj)
+#define to_attr(a)	container_of(a, struct threshold_attr, attr)
 
 static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
 {
 	struct threshold_block *b = to_block(kobj);
 	struct threshold_attr *a = to_attr(attr);
 	ssize_t ret;
+
 	ret = a->show ? a->show(b, buf) : -EIO;
+
 	return ret;
 }
 
@@ -377,18 +382,20 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	struct threshold_block *b = to_block(kobj);
 	struct threshold_attr *a = to_attr(attr);
 	ssize_t ret;
+
 	ret = a->store ? a->store(b, buf, count) : -EIO;
+
 	return ret;
 }
 
 static struct sysfs_ops threshold_ops = {
-	.show = show,
-	.store = store,
+	.show			= show,
+	.store			= store,
 };
 
 static struct kobj_type threshold_ktype = {
-	.sysfs_ops = &threshold_ops,
-	.default_attrs = default_attrs,
+	.sysfs_ops		= &threshold_ops,
+	.default_attrs		= default_attrs,
 };
 
 static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
@@ -396,9 +403,9 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 					       unsigned int block,
 					       u32 address)
 {
-	int err;
-	u32 low, high;
 	struct threshold_block *b = NULL;
+	u32 low, high;
+	int err;
 
 	if ((bank >= NR_BANKS) || (block >= NR_BLOCKS))
 		return 0;
@@ -421,20 +428,21 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 	if (!b)
 		return -ENOMEM;
 
-	b->block = block;
-	b->bank = bank;
-	b->cpu = cpu;
-	b->address = address;
-	b->interrupt_enable = 0;
-	b->threshold_limit = THRESHOLD_MAX;
+	b->block		= block;
+	b->bank			= bank;
+	b->cpu			= cpu;
+	b->address		= address;
+	b->interrupt_enable	= 0;
+	b->threshold_limit	= THRESHOLD_MAX;
 
 	INIT_LIST_HEAD(&b->miscj);
 
-	if (per_cpu(threshold_banks, cpu)[bank]->blocks)
+	if (per_cpu(threshold_banks, cpu)[bank]->blocks) {
 		list_add(&b->miscj,
 			 &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj);
-	else
+	} else {
 		per_cpu(threshold_banks, cpu)[bank]->blocks = b;
+	}
 
 	err = kobject_init_and_add(&b->kobj, &threshold_ktype,
 				   per_cpu(threshold_banks, cpu)[bank]->kobj,
@@ -447,8 +455,9 @@ recurse:
 		if (!address)
 			return 0;
 		address += MCG_XBLK_ADDR;
-	} else
+	} else {
 		++address;
+	}
 
 	err = allocate_threshold_blocks(cpu, bank, ++block, address);
 	if (err)
@@ -500,13 +509,14 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (!b)
 			goto out;
 
-		err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj,
+		err = sysfs_create_link(&per_cpu(mce_dev, cpu).kobj,
 					b->kobj, name);
 		if (err)
 			goto out;
 
 		cpumask_copy(b->cpus, cpu_core_mask(cpu));
 		per_cpu(threshold_banks, cpu)[bank] = b;
+
 		goto out;
 	}
 #endif
@@ -522,7 +532,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		goto out;
 	}
 
-	b->kobj = kobject_create_and_add(name, &per_cpu(device_mce, cpu).kobj);
+	b->kobj = kobject_create_and_add(name, &per_cpu(mce_dev, cpu).kobj);
 	if (!b->kobj)
 		goto out_free;
 
@@ -542,7 +552,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (i == cpu)
 			continue;
 
-		err = sysfs_create_link(&per_cpu(device_mce, i).kobj,
+		err = sysfs_create_link(&per_cpu(mce_dev, i).kobj,
 					b->kobj, name);
 		if (err)
 			goto out;
@@ -605,15 +615,13 @@ static void deallocate_threshold_block(unsigned int cpu,
 
 static void threshold_remove_bank(unsigned int cpu, int bank)
 {
-	int i = 0;
 	struct threshold_bank *b;
 	char name[32];
+	int i = 0;
 
 	b = per_cpu(threshold_banks, cpu)[bank];
-
 	if (!b)
 		return;
-
 	if (!b->blocks)
 		goto free_out;
 
@@ -622,8 +630,9 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #ifdef CONFIG_SMP
 	/* sibling symlink */
 	if (shared_bank[bank] && b->blocks->cpu != cpu) {
-		sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name);
+		sysfs_remove_link(&per_cpu(mce_dev, cpu).kobj, name);
 		per_cpu(threshold_banks, cpu)[bank] = NULL;
+
 		return;
 	}
 #endif
@@ -633,7 +642,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 		if (i == cpu)
 			continue;
 
-		sysfs_remove_link(&per_cpu(device_mce, i).kobj, name);
+		sysfs_remove_link(&per_cpu(mce_dev, i).kobj, name);
 		per_cpu(threshold_banks, i)[bank] = NULL;
 	}
 
@@ -659,12 +668,9 @@ static void threshold_remove_device(unsigned int cpu)
 }
 
 /* get notified when a cpu comes on/off */
-static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
-						     unsigned int cpu)
+static void __cpuinit
+amd_64_threshold_cpu_callback(unsigned long action, unsigned int cpu)
 {
-	if (cpu >= NR_CPUS)
-		return;
-
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
@@ -686,11 +692,12 @@ static __init int threshold_init_device(void)
 	/* to hit CPUs online before the notifier is up */
 	for_each_online_cpu(lcpu) {
 		int err = threshold_create_device(lcpu);
+
 		if (err)
 			return err;
 	}
 	threshold_cpu_callback = amd_64_threshold_cpu_callback;
+
 	return 0;
 }
-
 device_initcall(threshold_init_device);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
new file mode 100644
index 00000000000..2b011d2d857
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -0,0 +1,74 @@
+/*
+ * Common code for Intel machine checks
+ */
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+	unsigned int cpu = smp_processor_id();
+	int tm2 = 0;
+	u32 l, h;
+
+	/* Thermal monitoring depends on ACPI and clock modulation*/
+	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+		return;
+
+	/*
+	 * First check if its enabled already, in which case there might
+	 * be some SMM goo which handles it, so we can't even put a handler
+	 * since it might be delivered via SMI already:
+	 */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	h = apic_read(APIC_LVTTHMR);
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+		return;
+	}
+
+	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
+		tm2 = 1;
+
+	/* Check whether a vector already exists */
+	if (h & APIC_VECTOR_MASK) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
+		       cpu, (h & APIC_VECTOR_MASK));
+		return;
+	}
+
+	/* We'll mask the thermal vector in the lapic till we're ready: */
+	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+	apic_write(APIC_LVTTHMR, h);
+
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr(MSR_IA32_THERM_INTERRUPT,
+		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+	intel_set_thermal_handler();
+
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+	/* Unmask the thermal vector: */
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+	       cpu, tm2 ? "TM2" : "TM1");
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 65a0fceedcd..f2ef6952c40 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -16,6 +16,8 @@
 #include <asm/idle.h>
 #include <asm/therm_throt.h>
 
+#include "mce.h"
+
 asmlinkage void smp_thermal_interrupt(void)
 {
 	__u64 msr_val;
@@ -26,67 +28,13 @@ asmlinkage void smp_thermal_interrupt(void)
 	irq_enter();
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & 1))
+	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
 		mce_log_therm_throt_event(msr_val);
 
 	inc_irq_stat(irq_thermal_count);
 	irq_exit();
 }
 
-static void intel_init_thermal(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int tm2 = 0;
-	unsigned int cpu = smp_processor_id();
-
-	if (!cpu_has(c, X86_FEATURE_ACPI))
-		return;
-
-	if (!cpu_has(c, X86_FEATURE_ACC))
-		return;
-
-	/* first check if TM1 is already enabled by the BIOS, in which
-	 * case there might be some SMM goo which handles it, so we can't even
-	 * put a handler since it might be delivered via SMI already.
-	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
-		return;
-	}
-
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
-		tm2 = 1;
-
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal LVT vector (%#x) already "
-		       "installed\n", cpu, (h & APIC_VECTOR_MASK));
-		return;
-	}
-
-	h = THERMAL_APIC_VECTOR;
-	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);
-	apic_write(APIC_LVTTHMR, h);
-
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
-
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
-		cpu, tm2 ? "TM2" : "TM1");
-
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
-	return;
-}
-
 /*
  * Support for Intel Correct Machine Check Interrupts. This allows
  * the CPU to raise an interrupt when a corrected machine check happened.
@@ -108,6 +56,9 @@ static int cmci_supported(int *banks)
 {
 	u64 cap;
 
+	if (mce_cmci_disabled || mce_ignore_ce)
+		return 0;
+
 	/*
 	 * Vendor check is not strictly needed, but the initial
 	 * initialization is vendor keyed and this
@@ -131,7 +82,7 @@ static int cmci_supported(int *banks)
 static void intel_threshold_interrupt(void)
 {
 	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
-	mce_notify_user();
+	mce_notify_irq();
 }
 
 static void print_update(char *type, int *hdr, int num)
@@ -247,7 +198,7 @@ void cmci_rediscover(int dying)
 		return;
 	cpumask_copy(old, &current->cpus_allowed);
 
-	for_each_online_cpu (cpu) {
+	for_each_online_cpu(cpu) {
 		if (cpu == dying)
 			continue;
 		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index a74af128efc..70b710420f7 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -6,15 +6,14 @@
  * This file contains routines to check for non-fatal MCEs every 15s
  *
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
 #include <linux/interrupt.h>
-#include <linux/smp.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -22,9 +21,9 @@
 
 #include "mce.h"
 
-static int firstbank;
+static int		firstbank;
 
-#define MCE_RATE	15*HZ	/* timer rate is 15s */
+#define MCE_RATE	(15*HZ)	/* timer rate is 15s */
 
 static void mce_checkregs(void *info)
 {
@@ -34,23 +33,24 @@ static void mce_checkregs(void *info)
 	for (i = firstbank; i < nr_mce_banks; i++) {
 		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
 
-		if (high & (1<<31)) {
-			printk(KERN_INFO "MCE: The hardware reports a non "
-				"fatal, correctable incident occurred on "
-				"CPU %d.\n",
+		if (!(high & (1<<31)))
+			continue;
+
+		printk(KERN_INFO "MCE: The hardware reports a non fatal, "
+			"correctable incident occurred on CPU %d.\n",
 				smp_processor_id());
-			printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
-
-			/*
-			 * Scrub the error so we don't pick it up in MCE_RATE
-			 * seconds time.
-			 */
-			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-
-			/* Serialize */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
+
+		printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+
+		/*
+		 * Scrub the error so we don't pick it up in MCE_RATE
+		 * seconds time:
+		 */
+		wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+		/* Serialize: */
+		wmb();
+		add_taint(TAINT_MACHINE_CHECK);
 	}
 }
 
@@ -77,16 +77,17 @@ static int __init init_nonfatal_mce_checker(void)
 
 	/* Some Athlons misbehave when we frob bank 0 */
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-		boot_cpu_data.x86 == 6)
-			firstbank = 1;
+						boot_cpu_data.x86 == 6)
+		firstbank = 1;
 	else
-			firstbank = 0;
+		firstbank = 0;
 
 	/*
 	 * Check for non-fatal errors every MCE_RATE s
 	 */
 	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
 	printk(KERN_INFO "Machine check exception polling timer started.\n");
+
 	return 0;
 }
 module_init(init_nonfatal_mce_checker);
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index f53bdcbaf38..82cee108a2d 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -2,18 +2,17 @@
  * P4 specific Machine Check Exception Reporting
  */
 
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
+#include <asm/therm_throt.h>
 #include <asm/processor.h>
 #include <asm/system.h>
-#include <asm/msr.h>
 #include <asm/apic.h>
-
-#include <asm/therm_throt.h>
+#include <asm/msr.h>
 
 #include "mce.h"
 
@@ -36,6 +35,7 @@ static int mce_num_extended_msrs;
 
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
+
 static void unexpected_thermal_interrupt(struct pt_regs *regs)
 {
 	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
@@ -43,7 +43,7 @@ static void unexpected_thermal_interrupt(struct pt_regs *regs)
 	add_taint(TAINT_MACHINE_CHECK);
 }
 
-/* P4/Xeon Thermal transition interrupt handler */
+/* P4/Xeon Thermal transition interrupt handler: */
 static void intel_thermal_interrupt(struct pt_regs *regs)
 {
 	__u64 msr_val;
@@ -51,11 +51,12 @@ static void intel_thermal_interrupt(struct pt_regs *regs)
 	ack_APIC_irq();
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	therm_throt_process(msr_val & 0x1);
+	therm_throt_process(msr_val & THERM_STATUS_PROCHOT);
 }
 
-/* Thermal interrupt handler for this CPU setup */
-static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
+/* Thermal interrupt handler for this CPU setup: */
+static void (*vendor_thermal_interrupt)(struct pt_regs *regs) =
+						unexpected_thermal_interrupt;
 
 void smp_thermal_interrupt(struct pt_regs *regs)
 {
@@ -65,67 +66,15 @@ void smp_thermal_interrupt(struct pt_regs *regs)
 	irq_exit();
 }
 
-/* P4/Xeon Thermal regulation detect and init */
-static void intel_init_thermal(struct cpuinfo_x86 *c)
+void intel_set_thermal_handler(void)
 {
-	u32 l, h;
-	unsigned int cpu = smp_processor_id();
-
-	/* Thermal monitoring */
-	if (!cpu_has(c, X86_FEATURE_ACPI))
-		return;	/* -ENODEV */
-
-	/* Clock modulation */
-	if (!cpu_has(c, X86_FEATURE_ACC))
-		return;	/* -ENODEV */
-
-	/* first check if its enabled already, in which case there might
-	 * be some SMM goo which handles it, so we can't even put a handler
-	 * since it might be delivered via SMI already -zwanem.
-	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
-				cpu);
-		return; /* -EBUSY */
-	}
-
-	/* check whether a vector already exists, temporarily masked? */
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
-				"installed\n",
-			cpu, (h & APIC_VECTOR_MASK));
-		return; /* -EBUSY */
-	}
-
-	/* The temperature transition interrupt handler setup */
-	h = THERMAL_APIC_VECTOR;		/* our delivery vector */
-	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
-	apic_write(APIC_LVTTHMR, h);
-
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
-
-	/* ok we're good to go... */
 	vendor_thermal_interrupt = intel_thermal_interrupt;
-
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
-
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
-	return;
 }
-#endif /* CONFIG_X86_MCE_P4THERMAL */
 
+#endif /* CONFIG_X86_MCE_P4THERMAL */
 
 /* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
+static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {
 	u32 h;
 
@@ -143,9 +92,9 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 
 static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
+	int recover = 1;
 	int i;
 
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -157,7 +106,9 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 
 	if (mce_num_extended_msrs > 0) {
 		struct intel_mce_extended_msrs dbg;
+
 		intel_get_extended_msrs(&dbg);
+
 		printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
 			"\teax: %08x ebx: %08x ecx: %08x edx: %08x\n"
 			"\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
@@ -171,6 +122,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 		if (high & (1<<31)) {
 			char misc[20];
 			char addr[24];
+
 			misc[0] = addr[0] = '\0';
 			if (high & (1<<29))
 				recover |= 1;
@@ -196,6 +148,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 		panic("Unable to continue");
 
 	printk(KERN_EMERG "Attempting to continue.\n");
+
 	/*
 	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
@@ -217,7 +170,6 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
-
 void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index c9f77ea69ed..015f481ab1b 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -2,11 +2,10 @@
  * P5 specific Machine Check Exception Reporting
  * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -15,39 +14,58 @@
 
 #include "mce.h"
 
-/* Machine check handler for Pentium class Intel */
+/* By default disabled */
+int		mce_p5_enable;
+
+/* Machine check handler for Pentium class Intel CPUs: */
 static void pentium_machine_check(struct pt_regs *regs, long error_code)
 {
 	u32 loaddr, hi, lotype;
+
 	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
 	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
-	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
-	if (lotype&(1<<5))
-		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+
+	printk(KERN_EMERG
+		"CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n",
+		smp_processor_id(), loaddr, lotype);
+
+	if (lotype & (1<<5)) {
+		printk(KERN_EMERG
+			"CPU#%d: Possible thermal failure (CPU on fire ?).\n",
+			smp_processor_id());
+	}
+
 	add_taint(TAINT_MACHINE_CHECK);
 }
 
-/* Set up machine check reporting for processors with Intel style MCE */
+/* Set up machine check reporting for processors with Intel style MCE: */
 void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 
-	/*Check for MCE support */
+	/* Check for MCE support: */
 	if (!cpu_has(c, X86_FEATURE_MCE))
 		return;
 
-	/* Default P5 to off as its often misconnected */
+#ifdef CONFIG_X86_OLD_MCE
+	/* Default P5 to off as its often misconnected: */
 	if (mce_disabled != -1)
 		return;
+#endif
+
 	machine_check_vector = pentium_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
 
-	/* Read registers before enabling */
+	/* Read registers before enabling: */
 	rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
 	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
-	printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+	printk(KERN_INFO
+	       "Intel old style machine check architecture supported.\n");
 
-	/* Enable MCE */
+	/* Enable MCE: */
 	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+	printk(KERN_INFO
+	       "Intel old style machine check reporting enabled on CPU#%d.\n",
+	       smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index 2ac52d7b434..43c24e66745 100644
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
@@ -2,11 +2,10 @@
  * P6 specific Machine Check Exception Reporting
  * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -18,9 +17,9 @@
 /* Machine Check Handler For PII/PIII */
 static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
+	int recover = 1;
 	int i;
 
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -35,12 +34,16 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 		if (high & (1<<31)) {
 			char misc[20];
 			char addr[24];
-			misc[0] = addr[0] = '\0';
+
+			misc[0] = '\0';
+			addr[0] = '\0';
+
 			if (high & (1<<29))
 				recover |= 1;
 			if (high & (1<<25))
 				recover |= 2;
 			high &= ~(1<<31);
+
 			if (high & (1<<27)) {
 				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
 				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
@@ -49,6 +52,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
 				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
 			}
+
 			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
 				smp_processor_id(), i, high, low, misc, addr);
 		}
@@ -63,16 +67,17 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 	/*
 	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
-	 * for errors if the OS could not log the error.
+	 * for errors if the OS could not log the error:
 	 */
 	for (i = 0; i < nr_mce_banks; i++) {
 		unsigned int msr;
+
 		msr = MSR_IA32_MC0_STATUS+i*4;
 		rdmsr(msr, low, high);
 		if (high & (1<<31)) {
-			/* Clear it */
+			/* Clear it: */
 			wrmsr(msr, 0UL, 0UL);
-			/* Serialize */
+			/* Serialize: */
 			wmb();
 			add_taint(TAINT_MACHINE_CHECK);
 		}
@@ -81,7 +86,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
-/* Set up machine check reporting for processors with Intel style MCE */
+/* Set up machine check reporting for processors with Intel style MCE: */
 void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -97,6 +102,7 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 
 	/* Ok machine check is available */
 	machine_check_vector = intel_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
 
 	printk(KERN_INFO "Intel machine check architecture supported.\n");
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index d5ae2243f0b..7b1ae2e20ba 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -1,7 +1,7 @@
 /*
- *
  * Thermal throttle event support code (such as syslog messaging and rate
  * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ *
  * This allows consistent reporting of CPU thermal throttle events.
  *
  * Maintains a counter in /sys that keeps track of the number of thermal
@@ -13,43 +13,43 @@
  * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
  *          Inspired by Ross Biro's and Al Borchers' counter code.
  */
-
+#include <linux/notifier.h>
+#include <linux/jiffies.h>
 #include <linux/percpu.h>
 #include <linux/sysdev.h>
 #include <linux/cpu.h>
-#include <asm/cpu.h>
-#include <linux/notifier.h>
-#include <linux/jiffies.h>
+
 #include <asm/therm_throt.h>
 
 /* How long to wait between reporting thermal events */
-#define CHECK_INTERVAL              (300 * HZ)
+#define CHECK_INTERVAL		(300 * HZ)
 
 static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
 static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-atomic_t therm_throt_en = ATOMIC_INIT(0);
+
+atomic_t therm_throt_en		= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
-#define define_therm_throt_sysdev_one_ro(_name)                              \
-        static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
-
-#define define_therm_throt_sysdev_show_func(name)                            \
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
-					struct sysdev_attribute *attr,	     \
-                                              char *buf)                     \
-{                                                                            \
-	unsigned int cpu = dev->id;                                          \
-	ssize_t ret;                                                         \
-                                                                             \
-	preempt_disable();              /* CPU hotplug */                    \
-	if (cpu_online(cpu))                                                 \
-		ret = sprintf(buf, "%lu\n",                                  \
-			      per_cpu(thermal_throttle_##name, cpu));        \
-	else                                                                 \
-		ret = 0;                                                     \
-	preempt_enable();                                                    \
-                                                                             \
-	return ret;                                                          \
+#define define_therm_throt_sysdev_one_ro(_name)				\
+	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
+
+#define define_therm_throt_sysdev_show_func(name)			\
+static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
+					struct sysdev_attribute *attr,	\
+					      char *buf)		\
+{									\
+	unsigned int cpu = dev->id;					\
+	ssize_t ret;							\
+									\
+	preempt_disable();	/* CPU hotplug */			\
+	if (cpu_online(cpu))						\
+		ret = sprintf(buf, "%lu\n",				\
+			      per_cpu(thermal_throttle_##name, cpu));	\
+	else								\
+		ret = 0;						\
+	preempt_enable();						\
+									\
+	return ret;							\
 }
 
 define_therm_throt_sysdev_show_func(count);
@@ -61,8 +61,8 @@ static struct attribute *thermal_throttle_attrs[] = {
 };
 
 static struct attribute_group thermal_throttle_attr_group = {
-	.attrs = thermal_throttle_attrs,
-	.name = "thermal_throttle"
+	.attrs	= thermal_throttle_attrs,
+	.name	= "thermal_throttle"
 };
 #endif /* CONFIG_SYSFS */
 
@@ -110,10 +110,11 @@ int therm_throt_process(int curr)
 }
 
 #ifdef CONFIG_SYSFS
-/* Add/Remove thermal_throttle interface for CPU device */
+/* Add/Remove thermal_throttle interface for CPU device: */
 static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev)
 {
-	return sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+	return sysfs_create_group(&sys_dev->kobj,
+				  &thermal_throttle_attr_group);
 }
 
 static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
@@ -121,19 +122,21 @@ static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
 	sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
 }
 
-/* Mutex protecting device creation against CPU hotplug */
+/* Mutex protecting device creation against CPU hotplug: */
 static DEFINE_MUTEX(therm_cpu_lock);
 
 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb,
-						   unsigned long action,
-						   void *hcpu)
+static __cpuinit int
+thermal_throttle_cpu_callback(struct notifier_block *nfb,
+			      unsigned long action,
+			      void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
 	struct sys_device *sys_dev;
 	int err = 0;
 
 	sys_dev = get_cpu_sysdev(cpu);
+
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index 23ee9e730f7..d746df2909c 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -17,7 +17,7 @@ static void default_threshold_interrupt(void)
 
 void (*mce_threshold_vector)(void) = default_threshold_interrupt;
 
-asmlinkage void mce_threshold_interrupt(void)
+asmlinkage void smp_threshold_interrupt(void)
 {
 	exit_idle();
 	irq_enter();
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 2a043d89811..81b02487090 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -2,11 +2,10 @@
  * IDT Winchip specific Machine Check Exception Reporting
  * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -14,7 +13,7 @@
 
 #include "mce.h"
 
-/* Machine check handler for WinChip C6 */
+/* Machine check handler for WinChip C6: */
 static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {
 	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
@@ -25,12 +24,18 @@ static void winchip_machine_check(struct pt_regs *regs, long error_code)
 void winchip_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 lo, hi;
+
 	machine_check_vector = winchip_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
+
 	rdmsr(MSR_IDT_FCR1, lo, hi);
 	lo |= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
 	lo &= ~(1<<4);	/* Enable MCE */
 	wrmsr(MSR_IDT_FCR1, lo, hi);
+
 	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+
+	printk(KERN_INFO
+	       "Winchip machine check reporting enabled on CPU#0.\n");
 }
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 895c82e7845..275bc142cd5 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -968,6 +968,13 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
+	/*
+	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
+	 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+					boot_cpu_data.x86_model == 28)
+		return -1;
+
 	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index a4742a340d8..de74f0a3e0e 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -963,6 +963,8 @@ END(\sym)
 #ifdef CONFIG_SMP
 apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
 	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+apicinterrupt REBOOT_VECTOR \
+	reboot_interrupt smp_reboot_interrupt
 #endif
 
 #ifdef CONFIG_X86_UV
@@ -994,10 +996,15 @@ apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
 #endif
 
 apicinterrupt THRESHOLD_APIC_VECTOR \
-	threshold_interrupt mce_threshold_interrupt
+	threshold_interrupt smp_threshold_interrupt
 apicinterrupt THERMAL_APIC_VECTOR \
 	thermal_interrupt smp_thermal_interrupt
 
+#ifdef CONFIG_X86_MCE
+apicinterrupt MCE_SELF_VECTOR \
+	mce_self_interrupt smp_mce_self_interrupt
+#endif
+
 #ifdef CONFIG_SMP
 apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
 	call_function_single_interrupt smp_call_function_single_interrupt
@@ -1379,7 +1386,7 @@ errorentry xen_stack_segment do_stack_segment
 errorentry general_protection do_general_protection
 errorentry page_fault do_page_fault
 #ifdef CONFIG_X86_MCE
-paranoidzeroentry machine_check do_machine_check
+paranoidzeroentry machine_check *machine_check_vector(%rip)
 #endif
 
 	/*
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 38287b5f116..b0cdde6932f 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -12,6 +12,7 @@
 #include <asm/io_apic.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
+#include <asm/mce.h>
 #include <asm/hw_irq.h>
 
 atomic_t irq_err_count;
@@ -96,13 +97,23 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
 	seq_printf(p, "  Thermal event interrupts\n");
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
 	seq_printf(p, "%*s: ", prec, "THR");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
 	seq_printf(p, "  Threshold APIC interrupts\n");
 # endif
 #endif
+#ifdef CONFIG_X86_NEW_MCE
+	seq_printf(p, "%*s: ", prec, "MCE");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(mce_exception_count, j));
+	seq_printf(p, "  Machine check exceptions\n");
+	seq_printf(p, "%*s: ", prec, "MCP");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
+	seq_printf(p, "  Machine check polls\n");
+#endif
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
 #if defined(CONFIG_X86_IO_APIC)
 	seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
@@ -185,10 +196,14 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 #endif
 #ifdef CONFIG_X86_MCE
 	sum += irq_stats(cpu)->irq_thermal_count;
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
 	sum += irq_stats(cpu)->irq_threshold_count;
 # endif
 #endif
+#ifdef CONFIG_X86_NEW_MCE
+	sum += per_cpu(mce_exception_count, cpu);
+	sum += per_cpu(mce_poll_count, cpu);
+#endif
 	return sum;
 }
 
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 267c6624c77..696f0e475c2 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -173,6 +173,9 @@ static void __init smp_intr_init(void)
 	/* Low priority IPI to cleanup after moving an irq */
 	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 	set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+
+	/* IPI used for rebooting/stopping */
+	alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
 #endif
 #endif /* CONFIG_SMP */
 }
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module.c
index c23880b90b5..89f386f044e 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module.c
@@ -1,6 +1,5 @@
-/*  Kernel module help for x86-64
+/*  Kernel module help for x86.
     Copyright (C) 2001 Rusty Russell.
-    Copyright (C) 2002,2003 Andi Kleen, SuSE Labs.
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -22,23 +21,18 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/bug.h>
+#include <linux/mm.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 
+#if 0
+#define DEBUGP printk
+#else
 #define DEBUGP(fmt...)
-
-#ifndef CONFIG_UML
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
-}
+#endif
 
 void *module_alloc(unsigned long size)
 {
@@ -54,9 +48,15 @@ void *module_alloc(unsigned long size)
 	if (!area)
 		return NULL;
 
-	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
+	return __vmalloc_area(area, GFP_KERNEL | __GFP_HIGHMEM,
+					PAGE_KERNEL_EXEC);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
 }
-#endif
 
 /* We don't need anything special. */
 int module_frob_arch_sections(Elf_Ehdr *hdr,
@@ -67,6 +67,58 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 	return 0;
 }
 
+#ifdef CONFIG_X86_32
+int apply_relocate(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	unsigned int i;
+	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_386_32:
+			/* We add the value into the location given */
+			*location += sym->st_value;
+			break;
+		case R_386_PC32:
+			/* Add the value, subtract its postition */
+			*location += sym->st_value - (uint32_t)location;
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+	       me->name);
+	return -ENOEXEC;
+}
+#else /*X86_64*/
 int apply_relocate_add(Elf64_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -147,6 +199,8 @@ int apply_relocate(Elf_Shdr *sechdrs,
 	return -ENOSYS;
 }
 
+#endif
+
 int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
diff --git a/arch/x86/kernel/module_32.c b/arch/x86/kernel/module_32.c
deleted file mode 100644
index 0edd819050e..00000000000
--- a/arch/x86/kernel/module_32.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*  Kernel module help for i386.
-    Copyright (C) 2001 Rusty Russell.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc_exec(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
-}
-
-/* We don't need anything special. */
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	unsigned int i;
-	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rel[i].r_info);
-
-		switch (ELF32_R_TYPE(rel[i].r_info)) {
-		case R_386_32:
-			/* We add the value into the location given */
-			*location += sym->st_value;
-			break;
-		case R_386_PC32:
-			/* Add the value, subtract its postition */
-			*location += sym->st_value - (uint32_t)location;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       me->name, ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
-		*para = NULL;
-	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
-	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
-		if (!strcmp(".text", secstrings + s->sh_name))
-			text = s;
-		if (!strcmp(".altinstructions", secstrings + s->sh_name))
-			alt = s;
-		if (!strcmp(".smp_locks", secstrings + s->sh_name))
-			locks = s;
-		if (!strcmp(".parainstructions", secstrings + s->sh_name))
-			para = s;
-	}
-
-	if (alt) {
-		/* patch .altinstructions */
-		void *aseg = (void *)alt->sh_addr;
-		apply_alternatives(aseg, aseg + alt->sh_size);
-	}
-	if (locks && text) {
-		void *lseg = (void *)locks->sh_addr;
-		void *tseg = (void *)text->sh_addr;
-		alternatives_smp_module_add(me, me->name,
-					    lseg, lseg + locks->sh_size,
-					    tseg, tseg + text->sh_size);
-	}
-
-	if (para) {
-		void *pseg = (void *)para->sh_addr;
-		apply_paravirt(pseg, pseg + para->sh_size);
-	}
-
-	return module_bug_finalize(hdr, sechdrs, me);
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	alternatives_smp_module_del(mod);
-	module_bug_cleanup(mod);
-}
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 0a813b17b17..4c578751e94 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -24,11 +24,11 @@
 #include <asm/ucontext.h>
 #include <asm/i387.h>
 #include <asm/vdso.h>
+#include <asm/mce.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/proto.h>
 #include <asm/ia32_unistd.h>
-#include <asm/mce.h>
 #endif /* CONFIG_X86_64 */
 
 #include <asm/syscall.h>
@@ -856,10 +856,10 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#ifdef CONFIG_X86_NEW_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
-		mce_notify_user();
+		mce_notify_process();
 #endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
 
 	/* deal with pending signal delivery */
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 28f5fb495a6..ec1de97600e 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -150,14 +150,40 @@ void native_send_call_func_ipi(const struct cpumask *mask)
  * this function calls the 'stop' function on all other CPUs in the system.
  */
 
+asmlinkage void smp_reboot_interrupt(void)
+{
+	ack_APIC_irq();
+	irq_enter();
+	stop_this_cpu(NULL);
+	irq_exit();
+}
+
 static void native_smp_send_stop(void)
 {
 	unsigned long flags;
+	unsigned long wait;
 
 	if (reboot_force)
 		return;
 
-	smp_call_function(stop_this_cpu, NULL, 0);
+	/*
+	 * Use an own vector here because smp_call_function
+	 * does lots of things not suitable in a panic situation.
+	 * On most systems we could also use an NMI here,
+	 * but there are a few systems around where NMI
+	 * is problematic so stay with an non NMI for now
+	 * (this implies we cannot stop CPUs spinning with irq off
+	 * currently)
+	 */
+	if (num_online_cpus() > 1) {
+		apic->send_IPI_allbutself(REBOOT_VECTOR);
+
+		/* Don't wait longer than a second */
+		wait = USEC_PER_SEC;
+		while (num_online_cpus() > 1 && wait--)
+			udelay(1);
+	}
+
 	local_irq_save(flags);
 	disable_local_APIC();
 	local_irq_restore(flags);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7c80007ea5f..2fecda69ee6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -873,7 +873,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	err = do_boot_cpu(apicid, cpu);
 
-	zap_low_mappings();
+	zap_low_mappings(false);
 	low_mappings = 0;
 #else
 	err = do_boot_cpu(apicid, cpu);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 07d60c870ce..1e1e27b7d43 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -798,15 +798,15 @@ unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
 
 	return new_kesp;
 }
-#else
+#endif
+
 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
 {
 }
 
-asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
+asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 {
 }
-#endif
 
 /*
  * 'math_state_restore()' saves the current math information in the
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 8dab8f7844d..38718041efc 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -2,7 +2,6 @@ config LGUEST_GUEST
 	bool "Lguest guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !X86_PAE
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 4e0c2655939..7bc65f0f62c 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -87,7 +87,7 @@ struct lguest_data lguest_data = {
 
 /*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
- * do a normal hypercall.  Each entry in the ring has 4 slots for the hypercall
+ * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
  * and 255 once the Host has finished with it.
  *
@@ -96,7 +96,8 @@ struct lguest_data lguest_data = {
  * effect of causing the Host to run all the stored calls in the ring buffer
  * which empties it for next time! */
 static void async_hcall(unsigned long call, unsigned long arg1,
-			unsigned long arg2, unsigned long arg3)
+			unsigned long arg2, unsigned long arg3,
+			unsigned long arg4)
 {
 	/* Note: This code assumes we're uniprocessor. */
 	static unsigned int next_call;
@@ -108,12 +109,13 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
-		kvm_hypercall3(call, arg1, arg2, arg3);
+		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
 	} else {
 		lguest_data.hcalls[next_call].arg0 = call;
 		lguest_data.hcalls[next_call].arg1 = arg1;
 		lguest_data.hcalls[next_call].arg2 = arg2;
 		lguest_data.hcalls[next_call].arg3 = arg3;
+		lguest_data.hcalls[next_call].arg4 = arg4;
 		/* Arguments must all be written before we mark it to go */
 		wmb();
 		lguest_data.hcall_status[next_call] = 0;
@@ -141,7 +143,7 @@ static void lazy_hcall1(unsigned long call,
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall1(call, arg1);
 	else
-		async_hcall(call, arg1, 0, 0);
+		async_hcall(call, arg1, 0, 0, 0);
 }
 
 static void lazy_hcall2(unsigned long call,
@@ -151,7 +153,7 @@ static void lazy_hcall2(unsigned long call,
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall2(call, arg1, arg2);
 	else
-		async_hcall(call, arg1, arg2, 0);
+		async_hcall(call, arg1, arg2, 0, 0);
 }
 
 static void lazy_hcall3(unsigned long call,
@@ -162,9 +164,23 @@ static void lazy_hcall3(unsigned long call,
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall3(call, arg1, arg2, arg3);
 	else
-		async_hcall(call, arg1, arg2, arg3);
+		async_hcall(call, arg1, arg2, arg3, 0);
 }
 
+#ifdef CONFIG_X86_PAE
+static void lazy_hcall4(unsigned long call,
+		       unsigned long arg1,
+		       unsigned long arg2,
+		       unsigned long arg3,
+		       unsigned long arg4)
+{
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+	else
+		async_hcall(call, arg1, arg2, arg3, arg4);
+}
+#endif
+
 /* When lazy mode is turned off reset the per-cpu lazy mode variable and then
  * issue the do-nothing hypercall to flush any stored calls. */
 static void lguest_leave_lazy_mmu_mode(void)
@@ -179,7 +195,7 @@ static void lguest_end_context_switch(struct task_struct *next)
 	paravirt_end_context_switch(next);
 }
 
-/*G:033
+/*G:032
  * After that diversion we return to our first native-instruction
  * replacements: four functions for interrupt control.
  *
@@ -199,30 +215,28 @@ static unsigned long save_fl(void)
 {
 	return lguest_data.irq_enabled;
 }
-PV_CALLEE_SAVE_REGS_THUNK(save_fl);
-
-/* restore_flags() just sets the flags back to the value given. */
-static void restore_fl(unsigned long flags)
-{
-	lguest_data.irq_enabled = flags;
-}
-PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
 
 /* Interrupts go off... */
 static void irq_disable(void)
 {
 	lguest_data.irq_enabled = 0;
 }
+
+/* Let's pause a moment.  Remember how I said these are called so often?
+ * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
+ * break some rules.  In particular, these functions are assumed to save their
+ * own registers if they need to: normal C functions assume they can trash the
+ * eax register.  To use normal C functions, we use
+ * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
+ * C function, then restores it. */
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
+/*:*/
 
-/* Interrupts go on... */
-static void irq_enable(void)
-{
-	lguest_data.irq_enabled = X86_EFLAGS_IF;
-}
-PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
+/* These are in i386_head.S */
+extern void lg_irq_enable(void);
+extern void lg_restore_fl(unsigned long flags);
 
-/*:*/
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
  * since interrupts are rare and we'll just get the interrupt on the next timer
@@ -368,8 +382,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 	case 1:	/* Basic feature request. */
 		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
-		*dx &= 0x07808111;
+		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
+		*dx &= 0x07808151;
 		/* The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
@@ -388,6 +402,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 		if (*ax > 0x80000008)
 			*ax = 0x80000008;
 		break;
+	case 0x80000001:
+		/* Here we should fix nx cap depending on host. */
+		/* For this version of PAE, we just clear NX bit. */
+		*dx &= ~(1 << 20);
+		break;
 	}
 }
 
@@ -521,25 +540,52 @@ static void lguest_write_cr4(unsigned long val)
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
+#ifdef CONFIG_X86_PAE
+	lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
+		    ptep->pte_low, ptep->pte_high);
+#else
 	lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low);
+#endif
 }
 
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	native_set_pte(ptep, pteval);
 	lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls this to set a top-level entry.  Again, we set the entry then
- * tell the Host which top-level page we changed, and the index of the entry we
- * changed. */
+/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+ * to set a middle-level entry when PAE is activated.
+ * Again, we set the entry then tell the Host which page we changed,
+ * and the index of the entry we changed. */
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pud(pud_t *pudp, pud_t pudval)
+{
+	native_set_pud(pudp, pudval);
+
+	/* 32 bytes aligned pdpt address and the index. */
+	lazy_hcall2(LHCALL_SET_PGD, __pa(pudp) & 0xFFFFFFE0,
+		   (__pa(pudp) & 0x1F) / sizeof(pud_t));
+}
+
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
-	*pmdp = pmdval;
+	native_set_pmd(pmdp, pmdval);
 	lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
-		   (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
+		   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
 }
+#else
+
+/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
+ * activated. */
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+	native_set_pmd(pmdp, pmdval);
+	lazy_hcall2(LHCALL_SET_PGD, __pa(pmdp) & PAGE_MASK,
+		   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
+}
+#endif
 
 /* There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
@@ -552,11 +598,31 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * which brings boot back to 0.25 seconds. */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	native_set_pte(ptep, pteval);
+	if (cr3_changed)
+		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte_atomic(ptep, pte);
 	if (cr3_changed)
 		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
+void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	native_pte_clear(mm, addr, ptep);
+	lguest_pte_update(mm, addr, ptep);
+}
+
+void lguest_pmd_clear(pmd_t *pmdp)
+{
+	lguest_set_pmd(pmdp, __pmd(0));
+}
+#endif
+
 /* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
@@ -628,13 +694,12 @@ static void __init lguest_init_IRQ(void)
 {
 	unsigned int i;
 
-	for (i = 0; i < LGUEST_IRQS; i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
+	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
 		 * a straightforward 1 to 1 mapping, so force that here. */
-		__get_cpu_var(vector_irq)[vector] = i;
-		if (vector != SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
+		__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
+		if (i != SYSCALL_VECTOR)
+			set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 	/* This call is required to set up for 4k stacks, where we have
 	 * separate stacks for hard and soft interrupts. */
@@ -973,10 +1038,10 @@ static void lguest_restart(char *reason)
  *
  * Our current solution is to allow the paravirt back end to optionally patch
  * over the indirect calls to replace them with something more efficient.  We
- * patch the four most commonly called functions: disable interrupts, enable
- * interrupts, restore interrupts and save interrupts.  We usually have 6 or 10
- * bytes to patch into: the Guest versions of these operations are small enough
- * that we can fit comfortably.
+ * patch two of the simplest of the most commonly called functions: disable
+ * interrupts and save interrupts.  We usually have 6 or 10 bytes to patch
+ * into: the Guest versions of these operations are small enough that we can
+ * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
  * and these are in i386_head.S. */
@@ -987,8 +1052,6 @@ static const struct lguest_insns
 	const char *start, *end;
 } lguest_insns[] = {
 	[PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli },
-	[PARAVIRT_PATCH(pv_irq_ops.irq_enable)] = { lgstart_sti, lgend_sti },
-	[PARAVIRT_PATCH(pv_irq_ops.restore_fl)] = { lgstart_popf, lgend_popf },
 	[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
@@ -1026,6 +1089,7 @@ __init void lguest_init(void)
 	pv_info.name = "lguest";
 	pv_info.paravirt_enabled = 1;
 	pv_info.kernel_rpl = 1;
+	pv_info.shared_kernel_pmd = 1;
 
 	/* We set up all the lguest overrides for sensitive operations.  These
 	 * are detailed with the operations themselves. */
@@ -1033,9 +1097,9 @@ __init void lguest_init(void)
 	/* interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
-	pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
 	pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
-	pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
+	pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
 	/* init-time operations */
@@ -1071,6 +1135,12 @@ __init void lguest_init(void)
 	pv_mmu_ops.set_pte = lguest_set_pte;
 	pv_mmu_ops.set_pte_at = lguest_set_pte_at;
 	pv_mmu_ops.set_pmd = lguest_set_pmd;
+#ifdef CONFIG_X86_PAE
+	pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
+	pv_mmu_ops.pte_clear = lguest_pte_clear;
+	pv_mmu_ops.pmd_clear = lguest_pmd_clear;
+	pv_mmu_ops.set_pud = lguest_set_pud;
+#endif
 	pv_mmu_ops.read_cr2 = lguest_read_cr2;
 	pv_mmu_ops.read_cr3 = lguest_read_cr3;
 	pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index f7954198947..a9c8cfe61cd 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -46,10 +46,64 @@ ENTRY(lguest_entry)
 	.globl lgstart_##name; .globl lgend_##name
 
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
-LGUEST_PATCH(sti, movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled)
-LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
-/*:*/
+
+/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
+ * matter for save_fl and irq_disable later).  If we write our routines
+ * carefully in assembler, we can avoid clobbering any registers and avoid
+ * jumping through the wrapper functions.
+ *
+ * I skipped over our first piece of assembler, but this one is worth studying
+ * in a bit more detail so I'll describe in easy stages.  First, the routine
+ * to enable interrupts: */
+ENTRY(lg_irq_enable)
+	/* The reverse of irq_disable, this sets lguest_data.irq_enabled to
+	 * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+	movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
+	/* But now we need to check if the Host wants to know: there might have
+	 * been interrupts waiting to be delivered, in which case it will have
+	 * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
+	 * jump to send_interrupts, otherwise we're done. */
+	testl $0, lguest_data+LGUEST_DATA_irq_pending
+	jnz send_interrupts
+	/* One cool thing about x86 is that you can do many things without using
+	 * a register.  In this case, the normal path hasn't needed to save or
+	 * restore any registers at all! */
+	ret
+send_interrupts:
+	/* OK, now we need a register: eax is used for the hypercall number,
+	 * which is LHCALL_SEND_INTERRUPTS.
+	 *
+	 * We used not to bother with this pending detection at all, which was
+	 * much simpler.  Sooner or later the Host would realize it had to
+	 * send us an interrupt.  But that turns out to make performance 7
+	 * times worse on a simple tcp benchmark.  So now we do this the hard
+	 * way. */
+	pushl %eax
+	movl $LHCALL_SEND_INTERRUPTS, %eax
+	/* This is a vmcall instruction (same thing that KVM uses).  Older
+	 * assembler versions might not know the "vmcall" instruction, so we
+	 * create one manually here. */
+	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	popl %eax
+	ret
+
+/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+ * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
+ * enabling interrupts again, if it's 0 we're leaving them off. */
+ENTRY(lg_restore_fl)
+	/* This is just "lguest_data.irq_enabled = flags;" */
+	movl %eax, lguest_data+LGUEST_DATA_irq_enabled
+	/* Now, if the %eax value has enabled interrupts and
+	 * lguest_data.irq_pending is set, we want to tell the Host so it can
+	 * deliver any outstanding interrupts.  Fortunately, both values will
+	 * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
+	 * instruction will AND them together for us.  If both are set, we
+	 * jump to send_interrupts. */
+	testl lguest_data+LGUEST_DATA_irq_pending, %eax
+	jnz send_interrupts
+	/* Again, the normal path has used no extra registers.  Clever, huh? */
+	ret
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 949708d7a48..9ff3c0816d1 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -564,7 +564,7 @@ static inline void save_pg_dir(void)
 }
 #endif /* !CONFIG_ACPI_SLEEP */
 
-void zap_low_mappings(void)
+void zap_low_mappings(bool early)
 {
 	int i;
 
@@ -581,7 +581,11 @@ void zap_low_mappings(void)
 		set_pgd(swapper_pg_dir+i, __pgd(0));
 #endif
 	}
-	flush_tlb_all();
+
+	if (early)
+		__flush_tlb();
+	else
+		flush_tlb_all();
 }
 
 pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
@@ -956,7 +960,7 @@ void __init mem_init(void)
 		test_wp_bit();
 
 	save_pg_dir();
-	zap_low_mappings();
+	zap_low_mappings(true);
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index 58b32db3312..de2abbd0754 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -3,5 +3,5 @@
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_cpu_$(BITS).o	:= $(nostackp)
 
-obj-$(CONFIG_PM_SLEEP)		+= cpu_$(BITS).o
+obj-$(CONFIG_PM_SLEEP)		+= cpu.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu_64.c b/arch/x86/power/cpu.c
index 5343540f260..d277ef1eea5 100644
--- a/arch/x86/power/cpu_64.c
+++ b/arch/x86/power/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Suspend and hibernation support for x86-64
+ * Suspend support specific for i386/x86-64.
  *
  * Distribute under GPLv2
  *
@@ -8,18 +8,28 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
-#include <linux/smp.h>
 #include <linux/suspend.h>
-#include <asm/proto.h>
-#include <asm/page.h>
+#include <linux/smp.h>
+
 #include <asm/pgtable.h>
+#include <asm/proto.h>
 #include <asm/mtrr.h>
+#include <asm/page.h>
+#include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
 
-static void fix_processor_context(void);
+#ifdef CONFIG_X86_32
+static struct saved_context saved_context;
 
+unsigned long saved_context_ebx;
+unsigned long saved_context_esp, saved_context_ebp;
+unsigned long saved_context_esi, saved_context_edi;
+unsigned long saved_context_eflags;
+#else
+/* CONFIG_X86_64 */
 struct saved_context saved_context;
+#endif
 
 /**
  *	__save_processor_state - save CPU registers before creating a
@@ -38,19 +48,35 @@ struct saved_context saved_context;
  */
 static void __save_processor_state(struct saved_context *ctxt)
 {
+#ifdef CONFIG_X86_32
+	mtrr_save_fixed_ranges(NULL);
+#endif
 	kernel_fpu_begin();
 
 	/*
 	 * descriptor tables
 	 */
+#ifdef CONFIG_X86_32
+	store_gdt(&ctxt->gdt);
+	store_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
 	store_gdt((struct desc_ptr *)&ctxt->gdt_limit);
 	store_idt((struct desc_ptr *)&ctxt->idt_limit);
+#endif
 	store_tr(ctxt->tr);
 
 	/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
 	/*
 	 * segment registers
 	 */
+#ifdef CONFIG_X86_32
+	savesegment(es, ctxt->es);
+	savesegment(fs, ctxt->fs);
+	savesegment(gs, ctxt->gs);
+	savesegment(ss, ctxt->ss);
+#else
+/* CONFIG_X86_64 */
 	asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
 	asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
 	asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
@@ -62,30 +88,87 @@ static void __save_processor_state(struct saved_context *ctxt)
 	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
 	mtrr_save_fixed_ranges(NULL);
 
+	rdmsrl(MSR_EFER, ctxt->efer);
+#endif
+
 	/*
 	 * control registers
 	 */
-	rdmsrl(MSR_EFER, ctxt->efer);
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
+#ifdef CONFIG_X86_32
+	ctxt->cr4 = read_cr4_safe();
+#else
+/* CONFIG_X86_64 */
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
+#endif
 }
 
+/* Needed by apm.c */
 void save_processor_state(void)
 {
 	__save_processor_state(&saved_context);
 }
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(save_processor_state);
+#endif
 
 static void do_fpu_end(void)
 {
 	/*
-	 * Restore FPU regs if necessary
+	 * Restore FPU regs if necessary.
 	 */
 	kernel_fpu_end();
 }
 
+static void fix_processor_context(void)
+{
+	int cpu = smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+
+	set_tss_desc(cpu, t);	/*
+				 * This just modifies memory; should not be
+				 * necessary. But... This is necessary, because
+				 * 386 hardware has concept of busy TSS or some
+				 * similar stupidity.
+				 */
+
+#ifdef CONFIG_X86_64
+	get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
+
+	syscall_init();				/* This sets MSR_*STAR and related */
+#endif
+	load_TR_desc();				/* This does ltr */
+	load_LDT(&current->active_mm->context);	/* This does lldt */
+
+	/*
+	 * Now maybe reload the debug registers
+	 */
+	if (current->thread.debugreg7) {
+#ifdef CONFIG_X86_32
+		set_debugreg(current->thread.debugreg0, 0);
+		set_debugreg(current->thread.debugreg1, 1);
+		set_debugreg(current->thread.debugreg2, 2);
+		set_debugreg(current->thread.debugreg3, 3);
+		/* no 4 and 5 */
+		set_debugreg(current->thread.debugreg6, 6);
+		set_debugreg(current->thread.debugreg7, 7);
+#else
+		/* CONFIG_X86_64 */
+		loaddebug(&current->thread, 0);
+		loaddebug(&current->thread, 1);
+		loaddebug(&current->thread, 2);
+		loaddebug(&current->thread, 3);
+		/* no 4 and 5 */
+		loaddebug(&current->thread, 6);
+		loaddebug(&current->thread, 7);
+#endif
+	}
+
+}
+
 /**
  *	__restore_processor_state - restore the contents of CPU registers saved
  *		by __save_processor_state()
@@ -96,9 +179,16 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
+	/* cr4 was introduced in the Pentium CPU */
+#ifdef CONFIG_X86_32
+	if (ctxt->cr4)
+		write_cr4(ctxt->cr4);
+#else
+/* CONFIG X86_64 */
 	wrmsrl(MSR_EFER, ctxt->efer);
 	write_cr8(ctxt->cr8);
 	write_cr4(ctxt->cr4);
+#endif
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
@@ -107,13 +197,31 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	 * now restore the descriptor tables to their proper values
 	 * ltr is done i fix_processor_context().
 	 */
+#ifdef CONFIG_X86_32
+	load_gdt(&ctxt->gdt);
+	load_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
 	load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
 	load_idt((const struct desc_ptr *)&ctxt->idt_limit);
-
+#endif
 
 	/*
 	 * segment registers
 	 */
+#ifdef CONFIG_X86_32
+	loadsegment(es, ctxt->es);
+	loadsegment(fs, ctxt->fs);
+	loadsegment(gs, ctxt->gs);
+	loadsegment(ss, ctxt->ss);
+
+	/*
+	 * sysenter MSRs
+	 */
+	if (boot_cpu_has(X86_FEATURE_SEP))
+		enable_sep_cpu();
+#else
+/* CONFIG_X86_64 */
 	asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
 	asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
 	asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
@@ -123,6 +231,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	wrmsrl(MSR_FS_BASE, ctxt->fs_base);
 	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
 	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+#endif
 
 	/*
 	 * restore XCR0 for xsave capable cpu's.
@@ -134,41 +243,17 @@ static void __restore_processor_state(struct saved_context *ctxt)
 
 	do_fpu_end();
 	mtrr_ap_init();
+
+#ifdef CONFIG_X86_32
+	mcheck_init(&boot_cpu_data);
+#endif
 }
 
+/* Needed by apm.c */
 void restore_processor_state(void)
 {
 	__restore_processor_state(&saved_context);
 }
-
-static void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	/*
-	 * This just modifies memory; should not be necessary. But... This
-	 * is necessary, because 386 hardware has concept of busy TSS or some
-	 * similar stupidity.
-	 */
-	set_tss_desc(cpu, t);
-
-	get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
-
-	syscall_init();                         /* This sets MSR_*STAR and related */
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7){
-                loaddebug(&current->thread, 0);
-                loaddebug(&current->thread, 1);
-                loaddebug(&current->thread, 2);
-                loaddebug(&current->thread, 3);
-                /* no 4 and 5 */
-                loaddebug(&current->thread, 6);
-                loaddebug(&current->thread, 7);
-	}
-}
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(restore_processor_state);
+#endif
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
deleted file mode 100644
index ce702c5b3a2..00000000000
--- a/arch/x86/power/cpu_32.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Suspend support specific for i386.
- *
- * Distribute under GPLv2
- *
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
- */
-
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/xcr.h>
-#include <asm/suspend.h>
-
-static struct saved_context saved_context;
-
-unsigned long saved_context_ebx;
-unsigned long saved_context_esp, saved_context_ebp;
-unsigned long saved_context_esi, saved_context_edi;
-unsigned long saved_context_eflags;
-
-static void __save_processor_state(struct saved_context *ctxt)
-{
-	mtrr_save_fixed_ranges(NULL);
-	kernel_fpu_begin();
-
-	/*
-	 * descriptor tables
-	 */
-	store_gdt(&ctxt->gdt);
-	store_idt(&ctxt->idt);
-	store_tr(ctxt->tr);
-
-	/*
-	 * segment registers
-	 */
-	savesegment(es, ctxt->es);
-	savesegment(fs, ctxt->fs);
-	savesegment(gs, ctxt->gs);
-	savesegment(ss, ctxt->ss);
-
-	/*
-	 * control registers
-	 */
-	ctxt->cr0 = read_cr0();
-	ctxt->cr2 = read_cr2();
-	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4_safe();
-}
-
-/* Needed by apm.c */
-void save_processor_state(void)
-{
-	__save_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(save_processor_state);
-
-static void do_fpu_end(void)
-{
-	/*
-	 * Restore FPU regs if necessary.
-	 */
-	kernel_fpu_end();
-}
-
-static void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	set_tss_desc(cpu, t);	/*
-				 * This just modifies memory; should not be
-				 * necessary. But... This is necessary, because
-				 * 386 hardware has concept of busy TSS or some
-				 * similar stupidity.
-				 */
-
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
-
-}
-
-static void __restore_processor_state(struct saved_context *ctxt)
-{
-	/*
-	 * control registers
-	 */
-	/* cr4 was introduced in the Pentium CPU */
-	if (ctxt->cr4)
-		write_cr4(ctxt->cr4);
-	write_cr3(ctxt->cr3);
-	write_cr2(ctxt->cr2);
-	write_cr0(ctxt->cr0);
-
-	/*
-	 * now restore the descriptor tables to their proper values
-	 * ltr is done i fix_processor_context().
-	 */
-	load_gdt(&ctxt->gdt);
-	load_idt(&ctxt->idt);
-
-	/*
-	 * segment registers
-	 */
-	loadsegment(es, ctxt->es);
-	loadsegment(fs, ctxt->fs);
-	loadsegment(gs, ctxt->gs);
-	loadsegment(ss, ctxt->ss);
-
-	/*
-	 * sysenter MSRs
-	 */
-	if (boot_cpu_has(X86_FEATURE_SEP))
-		enable_sep_cpu();
-
-	/*
-	 * restore XCR0 for xsave capable cpu's.
-	 */
-	if (cpu_has_xsave)
-		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
-
-	fix_processor_context();
-	do_fpu_end();
-	mtrr_ap_init();
-	mcheck_init(&boot_cpu_data);
-}
-
-/* Needed by apm.c */
-void restore_processor_state(void)
-{
-	__restore_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(restore_processor_state);
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index 67ad67bed8c..22d6dde4261 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -292,7 +292,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __KERNEL__ */
 
 #endif /* _XTENSA_ATOMIC_H */
diff --git a/arch/xtensa/include/asm/bitsperlong.h b/arch/xtensa/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/xtensa/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index 17e0c5383b1..161bb89e98c 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -129,7 +129,7 @@ static inline __attribute_const__ int get_order(unsigned long size)
 
 #else
 
-# include <asm-generic/page.h>
+# include <asm-generic/getorder.h>
 
 #endif
 
diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c
index 3981a466c77..c1accea8cb5 100644
--- a/arch/xtensa/kernel/module.c
+++ b/arch/xtensa/kernel/module.c
@@ -34,8 +34,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
 }
 
 int module_frob_arch_sections(Elf32_Ehdr *hdr,
diff --git a/block/blk-core.c b/block/blk-core.c
index d17d71c71d4..b06cf5c2a82 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -26,7 +26,6 @@
 #include <linux/swap.h>
 #include <linux/writeback.h>
 #include <linux/task_io_accounting_ops.h>
-#include <linux/blktrace_api.h>
 #include <linux/fault-inject.h>
 
 #define CREATE_TRACE_POINTS
@@ -498,6 +497,11 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
 
 	q->backing_dev_info.unplug_io_fn = blk_backing_dev_unplug;
 	q->backing_dev_info.unplug_io_data = q;
+	q->backing_dev_info.ra_pages =
+			(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
+	q->backing_dev_info.state = 0;
+	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
+
 	err = bdi_init(&q->backing_dev_info);
 	if (err) {
 		kmem_cache_free(blk_requestq_cachep, q);
@@ -884,9 +888,10 @@ EXPORT_SYMBOL(blk_get_request);
 
 /**
  * blk_make_request - given a bio, allocate a corresponding struct request.
- *
+ * @q: target request queue
  * @bio:  The bio describing the memory mappings that will be submitted for IO.
  *        It may be a chained-bio properly constructed by block/bio layer.
+ * @gfp_mask: gfp flags to be used for memory allocation
  *
  * blk_make_request is the parallel of generic_make_request for BLOCK_PC
  * type commands. Where the struct request needs to be farther initialized by
@@ -1872,14 +1877,14 @@ EXPORT_SYMBOL(blk_fetch_request);
 
 /**
  * blk_update_request - Special helper function for request stacking drivers
- * @rq:	      the request being processed
+ * @req:      the request being processed
  * @error:    %0 for success, < %0 for error
- * @nr_bytes: number of bytes to complete @rq
+ * @nr_bytes: number of bytes to complete @req
  *
  * Description:
- *     Ends I/O on a number of bytes attached to @rq, but doesn't complete
- *     the request structure even if @rq doesn't have leftover.
- *     If @rq has leftover, sets it up for the next range of segments.
+ *     Ends I/O on a number of bytes attached to @req, but doesn't complete
+ *     the request structure even if @req doesn't have leftover.
+ *     If @req has leftover, sets it up for the next range of segments.
  *
  *     This special helper function is only for request stacking drivers
  *     (e.g. request-based dm) so that they can handle partial completion.
@@ -2145,7 +2150,7 @@ EXPORT_SYMBOL_GPL(blk_end_request);
 /**
  * blk_end_request_all - Helper function for drives to finish the request.
  * @rq: the request to finish
- * @err: %0 for success, < %0 for error
+ * @error: %0 for success, < %0 for error
  *
  * Description:
  *     Completely finish @rq.
@@ -2166,7 +2171,7 @@ EXPORT_SYMBOL_GPL(blk_end_request_all);
 /**
  * blk_end_request_cur - Helper function to finish the current request chunk.
  * @rq: the request to finish the current chunk for
- * @err: %0 for success, < %0 for error
+ * @error: %0 for success, < %0 for error
  *
  * Description:
  *     Complete the current consecutively mapped chunk from @rq.
@@ -2203,7 +2208,7 @@ EXPORT_SYMBOL_GPL(__blk_end_request);
 /**
  * __blk_end_request_all - Helper function for drives to finish the request.
  * @rq: the request to finish
- * @err: %0 for success, < %0 for error
+ * @error: %0 for success, < %0 for error
  *
  * Description:
  *     Completely finish @rq.  Must be called with queue lock held.
@@ -2224,7 +2229,7 @@ EXPORT_SYMBOL_GPL(__blk_end_request_all);
 /**
  * __blk_end_request_cur - Helper function to finish the current request chunk.
  * @rq: the request to finish the current chunk for
- * @err: %0 for success, < %0 for error
+ * @error: %0 for success, < %0 for error
  *
  * Description:
  *     Complete the current consecutively mapped chunk from @rq.  Must
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 1c4df9bf681..7541ea4bf9f 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -96,6 +96,31 @@ void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn)
 EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
 
 /**
+ * blk_set_default_limits - reset limits to default values
+ * @limits:  the queue_limits structure to reset
+ *
+ * Description:
+ *   Returns a queue_limit struct to its default state.  Can be used by
+ *   stacking drivers like DM that stage table swaps and reuse an
+ *   existing device queue.
+ */
+void blk_set_default_limits(struct queue_limits *lim)
+{
+	lim->max_phys_segments = MAX_PHYS_SEGMENTS;
+	lim->max_hw_segments = MAX_HW_SEGMENTS;
+	lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
+	lim->max_segment_size = MAX_SEGMENT_SIZE;
+	lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
+	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
+	lim->bounce_pfn = BLK_BOUNCE_ANY;
+	lim->alignment_offset = 0;
+	lim->io_opt = 0;
+	lim->misaligned = 0;
+	lim->no_cluster = 0;
+}
+EXPORT_SYMBOL(blk_set_default_limits);
+
+/**
  * blk_queue_make_request - define an alternate make_request function for a device
  * @q:  the request queue for the device to be affected
  * @mfn: the alternate make_request function
@@ -123,18 +148,8 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	 * set defaults
 	 */
 	q->nr_requests = BLKDEV_MAX_RQ;
-	blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
-	blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
-	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
-	blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
 
 	q->make_request_fn = mfn;
-	q->backing_dev_info.ra_pages =
-			(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
-	q->backing_dev_info.state = 0;
-	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
-	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
-	blk_queue_logical_block_size(q, 512);
 	blk_queue_dma_alignment(q, 511);
 	blk_queue_congestion_threshold(q);
 	q->nr_batching = BLK_BATCH_REQ;
@@ -147,6 +162,8 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	q->unplug_timer.function = blk_unplug_timeout;
 	q->unplug_timer.data = (unsigned long)q;
 
+	blk_set_default_limits(&q->limits);
+
 	/*
 	 * by default assume old behaviour and bounce for any highmem page
 	 */
@@ -343,7 +360,7 @@ EXPORT_SYMBOL(blk_queue_physical_block_size);
 /**
  * blk_queue_alignment_offset - set physical block alignment offset
  * @q:	the request queue for the device
- * @alignment:	alignment offset in bytes
+ * @offset: alignment offset in bytes
  *
  * Description:
  *   Some devices are naturally misaligned to compensate for things like
@@ -362,7 +379,7 @@ EXPORT_SYMBOL(blk_queue_alignment_offset);
 /**
  * blk_queue_io_min - set minimum request size for the queue
  * @q:	the request queue for the device
- * @io_min:  smallest I/O size in bytes
+ * @min:  smallest I/O size in bytes
  *
  * Description:
  *   Some devices have an internal block size bigger than the reported
@@ -385,7 +402,7 @@ EXPORT_SYMBOL(blk_queue_io_min);
 /**
  * blk_queue_io_opt - set optimal request size for the queue
  * @q:	the request queue for the device
- * @io_opt:  optimal request size in bytes
+ * @opt:  optimal request size in bytes
  *
  * Description:
  *   Drivers can call this function to set the preferred I/O request
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index ef2f72d4243..833ec18eaa6 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -122,7 +122,6 @@ struct cfq_data {
 	struct cfq_queue *async_idle_cfqq;
 
 	sector_t last_position;
-	unsigned long last_end_request;
 
 	/*
 	 * tunables, see top of file
@@ -1253,7 +1252,7 @@ static int cfq_forced_dispatch(struct cfq_data *cfqd)
 
 	BUG_ON(cfqd->busy_queues);
 
-	cfq_log(cfqd, "forced_dispatch=%d\n", dispatched);
+	cfq_log(cfqd, "forced_dispatch=%d", dispatched);
 	return dispatched;
 }
 
@@ -2164,9 +2163,6 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	if (cfq_cfqq_sync(cfqq))
 		cfqd->sync_flight--;
 
-	if (!cfq_class_idle(cfqq))
-		cfqd->last_end_request = now;
-
 	if (sync)
 		RQ_CIC(rq)->last_end_request = now;
 
@@ -2479,7 +2475,6 @@ static void *cfq_init_queue(struct request_queue *q)
 
 	INIT_WORK(&cfqd->unplug_work, cfq_kick_queue);
 
-	cfqd->last_end_request = jiffies;
 	cfqd->cfq_quantum = cfq_quantum;
 	cfqd->cfq_fifo_expire[0] = cfq_fifo_expire[0];
 	cfqd->cfq_fifo_expire[1] = cfq_fifo_expire[1];
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 74d0e622a51..4dfdd03e708 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -241,6 +241,11 @@ config CRYPTO_XTS
 	  key size 256, 384 or 512 bits. This implementation currently
 	  can't handle a sectorsize which is not a multiple of 16 bytes.
 
+config CRYPTO_FPU
+	tristate
+	select CRYPTO_BLKCIPHER
+	select CRYPTO_MANAGER
+
 comment "Hash modes"
 
 config CRYPTO_HMAC
@@ -486,6 +491,7 @@ config CRYPTO_AES_NI_INTEL
 	select CRYPTO_AES_X86_64
 	select CRYPTO_CRYPTD
 	select CRYPTO_ALGAPI
+	select CRYPTO_FPU
 	help
 	  Use Intel AES-NI instructions for AES algorithm.
 
@@ -505,6 +511,10 @@ config CRYPTO_AES_NI_INTEL
 
 	  See <http://csrc.nist.gov/encryption/aes/> for more information.
 
+	  In addition to AES cipher algorithm support, the
+	  acceleration for some popular block cipher mode is supported
+	  too, including ECB, CBC, CTR, LRW, PCBC, XTS.
+
 config CRYPTO_ANUBIS
 	tristate "Anubis cipher algorithm"
 	select CRYPTO_ALGAPI
diff --git a/crypto/algboss.c b/crypto/algboss.c
index 6906f92aeac..9908dd830c2 100644
--- a/crypto/algboss.c
+++ b/crypto/algboss.c
@@ -280,29 +280,13 @@ static struct notifier_block cryptomgr_notifier = {
 
 static int __init cryptomgr_init(void)
 {
-	int err;
-
-	err = testmgr_init();
-	if (err)
-		return err;
-
-	err = crypto_register_notifier(&cryptomgr_notifier);
-	if (err)
-		goto free_testmgr;
-
-	return 0;
-
-free_testmgr:
-	testmgr_exit();
-	return err;
+	return crypto_register_notifier(&cryptomgr_notifier);
 }
 
 static void __exit cryptomgr_exit(void)
 {
 	int err = crypto_unregister_notifier(&cryptomgr_notifier);
 	BUG_ON(err);
-
-	testmgr_exit();
 }
 
 subsys_initcall(cryptomgr_init);
diff --git a/crypto/api.c b/crypto/api.c
index fd2545decb2..d5944f92b41 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -217,14 +217,11 @@ struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask)
 
 	alg = crypto_alg_lookup(name, type, mask);
 	if (!alg) {
-		char tmp[CRYPTO_MAX_ALG_NAME];
-
-		request_module(name);
+		request_module("%s", name);
 
 		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
-		      CRYPTO_ALG_NEED_FALLBACK) &&
-		    snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
-			request_module(tmp);
+		      CRYPTO_ALG_NEED_FALLBACK))
+			request_module("%s-all", name);
 
 		alg = crypto_alg_lookup(name, type, mask);
 	}
@@ -580,20 +577,17 @@ EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
 void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm)
 {
 	struct crypto_alg *alg;
-	int size;
 
 	if (unlikely(!mem))
 		return;
 
 	alg = tfm->__crt_alg;
-	size = ksize(mem);
 
 	if (!tfm->exit && alg->cra_exit)
 		alg->cra_exit(tfm);
 	crypto_exit_ops(tfm);
 	crypto_mod_put(alg);
-	memset(mem, 0, size);
-	kfree(mem);
+	kzfree(mem);
 }
 EXPORT_SYMBOL_GPL(crypto_destroy_tfm);
 
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index d14b22658d7..ae5fa99d5d3 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -586,20 +586,24 @@ struct cryptd_ablkcipher *cryptd_alloc_ablkcipher(const char *alg_name,
 						  u32 type, u32 mask)
 {
 	char cryptd_alg_name[CRYPTO_MAX_ALG_NAME];
-	struct crypto_ablkcipher *tfm;
+	struct crypto_tfm *tfm;
 
 	if (snprintf(cryptd_alg_name, CRYPTO_MAX_ALG_NAME,
 		     "cryptd(%s)", alg_name) >= CRYPTO_MAX_ALG_NAME)
 		return ERR_PTR(-EINVAL);
-	tfm = crypto_alloc_ablkcipher(cryptd_alg_name, type, mask);
+	type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV);
+	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
+	mask &= ~CRYPTO_ALG_TYPE_MASK;
+	mask |= (CRYPTO_ALG_GENIV | CRYPTO_ALG_TYPE_BLKCIPHER_MASK);
+	tfm = crypto_alloc_base(cryptd_alg_name, type, mask);
 	if (IS_ERR(tfm))
 		return ERR_CAST(tfm);
-	if (crypto_ablkcipher_tfm(tfm)->__crt_alg->cra_module != THIS_MODULE) {
-		crypto_free_ablkcipher(tfm);
+	if (tfm->__crt_alg->cra_module != THIS_MODULE) {
+		crypto_free_tfm(tfm);
 		return ERR_PTR(-EINVAL);
 	}
 
-	return __cryptd_ablkcipher_cast(tfm);
+	return __cryptd_ablkcipher_cast(__crypto_ablkcipher_cast(tfm));
 }
 EXPORT_SYMBOL_GPL(cryptd_alloc_ablkcipher);
 
diff --git a/crypto/internal.h b/crypto/internal.h
index fc76e1f37fc..113579a82df 100644
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -121,9 +121,6 @@ int crypto_register_notifier(struct notifier_block *nb);
 int crypto_unregister_notifier(struct notifier_block *nb);
 int crypto_probing_notify(unsigned long val, void *v);
 
-int __init testmgr_init(void);
-void testmgr_exit(void);
-
 static inline void crypto_alg_put(struct crypto_alg *alg)
 {
 	if (atomic_dec_and_test(&alg->cra_refcnt) && alg->cra_destroy)
diff --git a/crypto/pcompress.c b/crypto/pcompress.c
index ca9a4af91ef..bcadc03726b 100644
--- a/crypto/pcompress.c
+++ b/crypto/pcompress.c
@@ -26,6 +26,7 @@
 #include <linux/string.h>
 
 #include <crypto/compress.h>
+#include <crypto/internal/compress.h>
 
 #include "internal.h"
 
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index c3c9124209a..d59ba5079d1 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -27,6 +27,7 @@
 #include <linux/timex.h>
 #include <linux/interrupt.h>
 #include "tcrypt.h"
+#include "internal.h"
 
 /*
  * Need slab memory for testing (size in number of pages).
@@ -396,16 +397,16 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 	struct scatterlist sg[TVMEMSIZE];
 	struct crypto_hash *tfm;
 	struct hash_desc desc;
-	char output[1024];
+	static char output[1024];
 	int i;
 	int ret;
 
-	printk("\ntesting speed of %s\n", algo);
+	printk(KERN_INFO "\ntesting speed of %s\n", algo);
 
 	tfm = crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC);
 
 	if (IS_ERR(tfm)) {
-		printk("failed to load transform for %s: %ld\n", algo,
+		printk(KERN_ERR "failed to load transform for %s: %ld\n", algo,
 		       PTR_ERR(tfm));
 		return;
 	}
@@ -414,7 +415,7 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 	desc.flags = 0;
 
 	if (crypto_hash_digestsize(tfm) > sizeof(output)) {
-		printk("digestsize(%u) > outputbuffer(%zu)\n",
+		printk(KERN_ERR "digestsize(%u) > outputbuffer(%zu)\n",
 		       crypto_hash_digestsize(tfm), sizeof(output));
 		goto out;
 	}
@@ -427,12 +428,14 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 
 	for (i = 0; speed[i].blen != 0; i++) {
 		if (speed[i].blen > TVMEMSIZE * PAGE_SIZE) {
-			printk("template (%u) too big for tvmem (%lu)\n",
+			printk(KERN_ERR
+			       "template (%u) too big for tvmem (%lu)\n",
 			       speed[i].blen, TVMEMSIZE * PAGE_SIZE);
 			goto out;
 		}
 
-		printk("test%3u (%5u byte blocks,%5u bytes per update,%4u updates): ",
+		printk(KERN_INFO "test%3u "
+		       "(%5u byte blocks,%5u bytes per update,%4u updates): ",
 		       i, speed[i].blen, speed[i].plen, speed[i].blen / speed[i].plen);
 
 		if (sec)
@@ -443,7 +446,7 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 					       speed[i].plen, output);
 
 		if (ret) {
-			printk("hashing failed ret=%d\n", ret);
+			printk(KERN_ERR "hashing failed ret=%d\n", ret);
 			break;
 		}
 	}
@@ -466,239 +469,255 @@ static void test_available(void)
 
 static inline int tcrypt_test(const char *alg)
 {
-	return alg_test(alg, alg, 0, 0);
+	int ret;
+
+	ret = alg_test(alg, alg, 0, 0);
+	/* non-fips algs return -EINVAL in fips mode */
+	if (fips_enabled && ret == -EINVAL)
+		ret = 0;
+	return ret;
 }
 
-static void do_test(int m)
+static int do_test(int m)
 {
 	int i;
+	int ret = 0;
 
 	switch (m) {
 	case 0:
 		for (i = 1; i < 200; i++)
-			do_test(i);
+			ret += do_test(i);
 		break;
 
 	case 1:
-		tcrypt_test("md5");
+		ret += tcrypt_test("md5");
 		break;
 
 	case 2:
-		tcrypt_test("sha1");
+		ret += tcrypt_test("sha1");
 		break;
 
 	case 3:
-		tcrypt_test("ecb(des)");
-		tcrypt_test("cbc(des)");
+		ret += tcrypt_test("ecb(des)");
+		ret += tcrypt_test("cbc(des)");
 		break;
 
 	case 4:
-		tcrypt_test("ecb(des3_ede)");
-		tcrypt_test("cbc(des3_ede)");
+		ret += tcrypt_test("ecb(des3_ede)");
+		ret += tcrypt_test("cbc(des3_ede)");
 		break;
 
 	case 5:
-		tcrypt_test("md4");
+		ret += tcrypt_test("md4");
 		break;
 
 	case 6:
-		tcrypt_test("sha256");
+		ret += tcrypt_test("sha256");
 		break;
 
 	case 7:
-		tcrypt_test("ecb(blowfish)");
-		tcrypt_test("cbc(blowfish)");
+		ret += tcrypt_test("ecb(blowfish)");
+		ret += tcrypt_test("cbc(blowfish)");
 		break;
 
 	case 8:
-		tcrypt_test("ecb(twofish)");
-		tcrypt_test("cbc(twofish)");
+		ret += tcrypt_test("ecb(twofish)");
+		ret += tcrypt_test("cbc(twofish)");
 		break;
 
 	case 9:
-		tcrypt_test("ecb(serpent)");
+		ret += tcrypt_test("ecb(serpent)");
 		break;
 
 	case 10:
-		tcrypt_test("ecb(aes)");
-		tcrypt_test("cbc(aes)");
-		tcrypt_test("lrw(aes)");
-		tcrypt_test("xts(aes)");
-		tcrypt_test("rfc3686(ctr(aes))");
+		ret += tcrypt_test("ecb(aes)");
+		ret += tcrypt_test("cbc(aes)");
+		ret += tcrypt_test("lrw(aes)");
+		ret += tcrypt_test("xts(aes)");
+		ret += tcrypt_test("ctr(aes)");
+		ret += tcrypt_test("rfc3686(ctr(aes))");
 		break;
 
 	case 11:
-		tcrypt_test("sha384");
+		ret += tcrypt_test("sha384");
 		break;
 
 	case 12:
-		tcrypt_test("sha512");
+		ret += tcrypt_test("sha512");
 		break;
 
 	case 13:
-		tcrypt_test("deflate");
+		ret += tcrypt_test("deflate");
 		break;
 
 	case 14:
-		tcrypt_test("ecb(cast5)");
+		ret += tcrypt_test("ecb(cast5)");
 		break;
 
 	case 15:
-		tcrypt_test("ecb(cast6)");
+		ret += tcrypt_test("ecb(cast6)");
 		break;
 
 	case 16:
-		tcrypt_test("ecb(arc4)");
+		ret += tcrypt_test("ecb(arc4)");
 		break;
 
 	case 17:
-		tcrypt_test("michael_mic");
+		ret += tcrypt_test("michael_mic");
 		break;
 
 	case 18:
-		tcrypt_test("crc32c");
+		ret += tcrypt_test("crc32c");
 		break;
 
 	case 19:
-		tcrypt_test("ecb(tea)");
+		ret += tcrypt_test("ecb(tea)");
 		break;
 
 	case 20:
-		tcrypt_test("ecb(xtea)");
+		ret += tcrypt_test("ecb(xtea)");
 		break;
 
 	case 21:
-		tcrypt_test("ecb(khazad)");
+		ret += tcrypt_test("ecb(khazad)");
 		break;
 
 	case 22:
-		tcrypt_test("wp512");
+		ret += tcrypt_test("wp512");
 		break;
 
 	case 23:
-		tcrypt_test("wp384");
+		ret += tcrypt_test("wp384");
 		break;
 
 	case 24:
-		tcrypt_test("wp256");
+		ret += tcrypt_test("wp256");
 		break;
 
 	case 25:
-		tcrypt_test("ecb(tnepres)");
+		ret += tcrypt_test("ecb(tnepres)");
 		break;
 
 	case 26:
-		tcrypt_test("ecb(anubis)");
-		tcrypt_test("cbc(anubis)");
+		ret += tcrypt_test("ecb(anubis)");
+		ret += tcrypt_test("cbc(anubis)");
 		break;
 
 	case 27:
-		tcrypt_test("tgr192");
+		ret += tcrypt_test("tgr192");
 		break;
 
 	case 28:
 
-		tcrypt_test("tgr160");
+		ret += tcrypt_test("tgr160");
 		break;
 
 	case 29:
-		tcrypt_test("tgr128");
+		ret += tcrypt_test("tgr128");
 		break;
 
 	case 30:
-		tcrypt_test("ecb(xeta)");
+		ret += tcrypt_test("ecb(xeta)");
 		break;
 
 	case 31:
-		tcrypt_test("pcbc(fcrypt)");
+		ret += tcrypt_test("pcbc(fcrypt)");
 		break;
 
 	case 32:
-		tcrypt_test("ecb(camellia)");
-		tcrypt_test("cbc(camellia)");
+		ret += tcrypt_test("ecb(camellia)");
+		ret += tcrypt_test("cbc(camellia)");
 		break;
 	case 33:
-		tcrypt_test("sha224");
+		ret += tcrypt_test("sha224");
 		break;
 
 	case 34:
-		tcrypt_test("salsa20");
+		ret += tcrypt_test("salsa20");
 		break;
 
 	case 35:
-		tcrypt_test("gcm(aes)");
+		ret += tcrypt_test("gcm(aes)");
 		break;
 
 	case 36:
-		tcrypt_test("lzo");
+		ret += tcrypt_test("lzo");
 		break;
 
 	case 37:
-		tcrypt_test("ccm(aes)");
+		ret += tcrypt_test("ccm(aes)");
 		break;
 
 	case 38:
-		tcrypt_test("cts(cbc(aes))");
+		ret += tcrypt_test("cts(cbc(aes))");
 		break;
 
         case 39:
-		tcrypt_test("rmd128");
+		ret += tcrypt_test("rmd128");
 		break;
 
         case 40:
-		tcrypt_test("rmd160");
+		ret += tcrypt_test("rmd160");
 		break;
 
 	case 41:
-		tcrypt_test("rmd256");
+		ret += tcrypt_test("rmd256");
 		break;
 
 	case 42:
-		tcrypt_test("rmd320");
+		ret += tcrypt_test("rmd320");
 		break;
 
 	case 43:
-		tcrypt_test("ecb(seed)");
+		ret += tcrypt_test("ecb(seed)");
 		break;
 
 	case 44:
-		tcrypt_test("zlib");
+		ret += tcrypt_test("zlib");
+		break;
+
+	case 45:
+		ret += tcrypt_test("rfc4309(ccm(aes))");
 		break;
 
 	case 100:
-		tcrypt_test("hmac(md5)");
+		ret += tcrypt_test("hmac(md5)");
 		break;
 
 	case 101:
-		tcrypt_test("hmac(sha1)");
+		ret += tcrypt_test("hmac(sha1)");
 		break;
 
 	case 102:
-		tcrypt_test("hmac(sha256)");
+		ret += tcrypt_test("hmac(sha256)");
 		break;
 
 	case 103:
-		tcrypt_test("hmac(sha384)");
+		ret += tcrypt_test("hmac(sha384)");
 		break;
 
 	case 104:
-		tcrypt_test("hmac(sha512)");
+		ret += tcrypt_test("hmac(sha512)");
 		break;
 
 	case 105:
-		tcrypt_test("hmac(sha224)");
+		ret += tcrypt_test("hmac(sha224)");
 		break;
 
 	case 106:
-		tcrypt_test("xcbc(aes)");
+		ret += tcrypt_test("xcbc(aes)");
 		break;
 
 	case 107:
-		tcrypt_test("hmac(rmd128)");
+		ret += tcrypt_test("hmac(rmd128)");
 		break;
 
 	case 108:
-		tcrypt_test("hmac(rmd160)");
+		ret += tcrypt_test("hmac(rmd160)");
+		break;
+
+	case 150:
+		ret += tcrypt_test("ansi_cprng");
 		break;
 
 	case 200:
@@ -862,6 +881,8 @@ static void do_test(int m)
 		test_available();
 		break;
 	}
+
+	return ret;
 }
 
 static int __init tcrypt_mod_init(void)
@@ -875,15 +896,21 @@ static int __init tcrypt_mod_init(void)
 			goto err_free_tv;
 	}
 
-	do_test(mode);
+	err = do_test(mode);
+	if (err) {
+		printk(KERN_ERR "tcrypt: one or more tests failed!\n");
+		goto err_free_tv;
+	}
 
-	/* We intentionaly return -EAGAIN to prevent keeping
-	 * the module. It does all its work from init()
-	 * and doesn't offer any runtime functionality 
+	/* We intentionaly return -EAGAIN to prevent keeping the module,
+	 * unless we're running in fips mode. It does all its work from
+	 * init() and doesn't offer any runtime functionality, but in
+	 * the fips case, checking for a successful load is helpful.
 	 * => we don't need it in the memory, do we?
 	 *                                        -- mludvig
 	 */
-	err = -EAGAIN;
+	if (!fips_enabled)
+		err = -EAGAIN;
 
 err_free_tv:
 	for (i = 0; i < TVMEMSIZE && tvmem[i]; i++)
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index b50c3c6b17a..e9e9d84293b 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -19,6 +19,7 @@
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <crypto/rng.h>
 
 #include "internal.h"
 #include "testmgr.h"
@@ -84,10 +85,16 @@ struct hash_test_suite {
 	unsigned int count;
 };
 
+struct cprng_test_suite {
+	struct cprng_testvec *vecs;
+	unsigned int count;
+};
+
 struct alg_test_desc {
 	const char *alg;
 	int (*test)(const struct alg_test_desc *desc, const char *driver,
 		    u32 type, u32 mask);
+	int fips_allowed;	/* set if alg is allowed in fips mode */
 
 	union {
 		struct aead_test_suite aead;
@@ -95,14 +102,12 @@ struct alg_test_desc {
 		struct comp_test_suite comp;
 		struct pcomp_test_suite pcomp;
 		struct hash_test_suite hash;
+		struct cprng_test_suite cprng;
 	} suite;
 };
 
 static unsigned int IDX[8] = { IDX1, IDX2, IDX3, IDX4, IDX5, IDX6, IDX7, IDX8 };
 
-static char *xbuf[XBUFSIZE];
-static char *axbuf[XBUFSIZE];
-
 static void hexdump(unsigned char *buf, unsigned int len)
 {
 	print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET,
@@ -121,6 +126,33 @@ static void tcrypt_complete(struct crypto_async_request *req, int err)
 	complete(&res->completion);
 }
 
+static int testmgr_alloc_buf(char *buf[XBUFSIZE])
+{
+	int i;
+
+	for (i = 0; i < XBUFSIZE; i++) {
+		buf[i] = (void *)__get_free_page(GFP_KERNEL);
+		if (!buf[i])
+			goto err_free_buf;
+	}
+
+	return 0;
+
+err_free_buf:
+	while (i-- > 0)
+		free_page((unsigned long)buf[i]);
+
+	return -ENOMEM;
+}
+
+static void testmgr_free_buf(char *buf[XBUFSIZE])
+{
+	int i;
+
+	for (i = 0; i < XBUFSIZE; i++)
+		free_page((unsigned long)buf[i]);
+}
+
 static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 		     unsigned int tcount)
 {
@@ -130,8 +162,12 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 	char result[64];
 	struct ahash_request *req;
 	struct tcrypt_result tresult;
-	int ret;
 	void *hash_buff;
+	char *xbuf[XBUFSIZE];
+	int ret = -ENOMEM;
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_nobuf;
 
 	init_completion(&tresult.completion);
 
@@ -139,17 +175,25 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 	if (!req) {
 		printk(KERN_ERR "alg: hash: Failed to allocate request for "
 		       "%s\n", algo);
-		ret = -ENOMEM;
 		goto out_noreq;
 	}
 	ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
 				   tcrypt_complete, &tresult);
 
+	j = 0;
 	for (i = 0; i < tcount; i++) {
+		if (template[i].np)
+			continue;
+
+		j++;
 		memset(result, 0, 64);
 
 		hash_buff = xbuf[0];
 
+		ret = -EINVAL;
+		if (WARN_ON(template[i].psize > PAGE_SIZE))
+			goto out;
+
 		memcpy(hash_buff, template[i].plaintext, template[i].psize);
 		sg_init_one(&sg[0], hash_buff, template[i].psize);
 
@@ -159,7 +203,7 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 						  template[i].ksize);
 			if (ret) {
 				printk(KERN_ERR "alg: hash: setkey failed on "
-				       "test %d for %s: ret=%d\n", i + 1, algo,
+				       "test %d for %s: ret=%d\n", j, algo,
 				       -ret);
 				goto out;
 			}
@@ -181,14 +225,14 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 			/* fall through */
 		default:
 			printk(KERN_ERR "alg: hash: digest failed on test %d "
-			       "for %s: ret=%d\n", i + 1, algo, -ret);
+			       "for %s: ret=%d\n", j, algo, -ret);
 			goto out;
 		}
 
 		if (memcmp(result, template[i].digest,
 			   crypto_ahash_digestsize(tfm))) {
 			printk(KERN_ERR "alg: hash: Test %d failed for %s\n",
-			       i + 1, algo);
+			       j, algo);
 			hexdump(result, crypto_ahash_digestsize(tfm));
 			ret = -EINVAL;
 			goto out;
@@ -203,7 +247,11 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 
 			temp = 0;
 			sg_init_table(sg, template[i].np);
+			ret = -EINVAL;
 			for (k = 0; k < template[i].np; k++) {
+				if (WARN_ON(offset_in_page(IDX[k]) +
+					    template[i].tap[k] > PAGE_SIZE))
+					goto out;
 				sg_set_buf(&sg[k],
 					   memcpy(xbuf[IDX[k] >> PAGE_SHIFT] +
 						  offset_in_page(IDX[k]),
@@ -265,6 +313,8 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 out:
 	ahash_request_free(req);
 out_noreq:
+	testmgr_free_buf(xbuf);
+out_nobuf:
 	return ret;
 }
 
@@ -273,7 +323,7 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 {
 	const char *algo = crypto_tfm_alg_driver_name(crypto_aead_tfm(tfm));
 	unsigned int i, j, k, n, temp;
-	int ret = 0;
+	int ret = -ENOMEM;
 	char *q;
 	char *key;
 	struct aead_request *req;
@@ -285,6 +335,13 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 	void *input;
 	void *assoc;
 	char iv[MAX_IVLEN];
+	char *xbuf[XBUFSIZE];
+	char *axbuf[XBUFSIZE];
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_noxbuf;
+	if (testmgr_alloc_buf(axbuf))
+		goto out_noaxbuf;
 
 	if (enc == ENCRYPT)
 		e = "encryption";
@@ -297,7 +354,6 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 	if (!req) {
 		printk(KERN_ERR "alg: aead: Failed to allocate request for "
 		       "%s\n", algo);
-		ret = -ENOMEM;
 		goto out;
 	}
 
@@ -314,6 +370,11 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 			input = xbuf[0];
 			assoc = axbuf[0];
 
+			ret = -EINVAL;
+			if (WARN_ON(template[i].ilen > PAGE_SIZE ||
+				    template[i].alen > PAGE_SIZE))
+				goto out;
+
 			memcpy(input, template[i].input, template[i].ilen);
 			memcpy(assoc, template[i].assoc, template[i].alen);
 			if (template[i].iv)
@@ -363,6 +424,16 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 
 			switch (ret) {
 			case 0:
+				if (template[i].novrfy) {
+					/* verification was supposed to fail */
+					printk(KERN_ERR "alg: aead: %s failed "
+					       "on test %d for %s: ret was 0, "
+					       "expected -EBADMSG\n",
+					       e, j, algo);
+					/* so really, we got a bad message */
+					ret = -EBADMSG;
+					goto out;
+				}
 				break;
 			case -EINPROGRESS:
 			case -EBUSY:
@@ -372,6 +443,10 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 					INIT_COMPLETION(result.completion);
 					break;
 				}
+			case -EBADMSG:
+				if (template[i].novrfy)
+					/* verification failure was expected */
+					continue;
 				/* fall through */
 			default:
 				printk(KERN_ERR "alg: aead: %s failed on test "
@@ -459,7 +534,11 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 			}
 
 			sg_init_table(asg, template[i].anp);
+			ret = -EINVAL;
 			for (k = 0, temp = 0; k < template[i].anp; k++) {
+				if (WARN_ON(offset_in_page(IDX[k]) +
+					    template[i].atap[k] > PAGE_SIZE))
+					goto out;
 				sg_set_buf(&asg[k],
 					   memcpy(axbuf[IDX[k] >> PAGE_SHIFT] +
 						  offset_in_page(IDX[k]),
@@ -481,6 +560,16 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 
 			switch (ret) {
 			case 0:
+				if (template[i].novrfy) {
+					/* verification was supposed to fail */
+					printk(KERN_ERR "alg: aead: %s failed "
+					       "on chunk test %d for %s: ret "
+					       "was 0, expected -EBADMSG\n",
+					       e, j, algo);
+					/* so really, we got a bad message */
+					ret = -EBADMSG;
+					goto out;
+				}
 				break;
 			case -EINPROGRESS:
 			case -EBUSY:
@@ -490,6 +579,10 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 					INIT_COMPLETION(result.completion);
 					break;
 				}
+			case -EBADMSG:
+				if (template[i].novrfy)
+					/* verification failure was expected */
+					continue;
 				/* fall through */
 			default:
 				printk(KERN_ERR "alg: aead: %s failed on "
@@ -546,6 +639,10 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 
 out:
 	aead_request_free(req);
+	testmgr_free_buf(axbuf);
+out_noaxbuf:
+	testmgr_free_buf(xbuf);
+out_noxbuf:
 	return ret;
 }
 
@@ -554,10 +651,14 @@ static int test_cipher(struct crypto_cipher *tfm, int enc,
 {
 	const char *algo = crypto_tfm_alg_driver_name(crypto_cipher_tfm(tfm));
 	unsigned int i, j, k;
-	int ret;
 	char *q;
 	const char *e;
 	void *data;
+	char *xbuf[XBUFSIZE];
+	int ret = -ENOMEM;
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_nobuf;
 
 	if (enc == ENCRYPT)
 	        e = "encryption";
@@ -571,6 +672,10 @@ static int test_cipher(struct crypto_cipher *tfm, int enc,
 
 		j++;
 
+		ret = -EINVAL;
+		if (WARN_ON(template[i].ilen > PAGE_SIZE))
+			goto out;
+
 		data = xbuf[0];
 		memcpy(data, template[i].input, template[i].ilen);
 
@@ -611,6 +716,8 @@ static int test_cipher(struct crypto_cipher *tfm, int enc,
 	ret = 0;
 
 out:
+	testmgr_free_buf(xbuf);
+out_nobuf:
 	return ret;
 }
 
@@ -620,7 +727,6 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 	const char *algo =
 		crypto_tfm_alg_driver_name(crypto_ablkcipher_tfm(tfm));
 	unsigned int i, j, k, n, temp;
-	int ret;
 	char *q;
 	struct ablkcipher_request *req;
 	struct scatterlist sg[8];
@@ -628,6 +734,11 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 	struct tcrypt_result result;
 	void *data;
 	char iv[MAX_IVLEN];
+	char *xbuf[XBUFSIZE];
+	int ret = -ENOMEM;
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_nobuf;
 
 	if (enc == ENCRYPT)
 	        e = "encryption";
@@ -640,7 +751,6 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 	if (!req) {
 		printk(KERN_ERR "alg: skcipher: Failed to allocate request "
 		       "for %s\n", algo);
-		ret = -ENOMEM;
 		goto out;
 	}
 
@@ -657,6 +767,10 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 		if (!(template[i].np)) {
 			j++;
 
+			ret = -EINVAL;
+			if (WARN_ON(template[i].ilen > PAGE_SIZE))
+				goto out;
+
 			data = xbuf[0];
 			memcpy(data, template[i].input, template[i].ilen);
 
@@ -825,6 +939,8 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 
 out:
 	ablkcipher_request_free(req);
+	testmgr_free_buf(xbuf);
+out_nobuf:
 	return ret;
 }
 
@@ -837,7 +953,8 @@ static int test_comp(struct crypto_comp *tfm, struct comp_testvec *ctemplate,
 	int ret;
 
 	for (i = 0; i < ctcount; i++) {
-		int ilen, dlen = COMP_BUF_SIZE;
+		int ilen;
+		unsigned int dlen = COMP_BUF_SIZE;
 
 		memset(result, 0, sizeof (result));
 
@@ -869,7 +986,8 @@ static int test_comp(struct crypto_comp *tfm, struct comp_testvec *ctemplate,
 	}
 
 	for (i = 0; i < dtcount; i++) {
-		int ilen, dlen = COMP_BUF_SIZE;
+		int ilen;
+		unsigned int dlen = COMP_BUF_SIZE;
 
 		memset(result, 0, sizeof (result));
 
@@ -914,24 +1032,25 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 	const char *algo = crypto_tfm_alg_driver_name(crypto_pcomp_tfm(tfm));
 	unsigned int i;
 	char result[COMP_BUF_SIZE];
-	int error;
+	int res;
 
 	for (i = 0; i < ctcount; i++) {
 		struct comp_request req;
+		unsigned int produced = 0;
 
-		error = crypto_compress_setup(tfm, ctemplate[i].params,
-					      ctemplate[i].paramsize);
-		if (error) {
+		res = crypto_compress_setup(tfm, ctemplate[i].params,
+					    ctemplate[i].paramsize);
+		if (res) {
 			pr_err("alg: pcomp: compression setup failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
-		error = crypto_compress_init(tfm);
-		if (error) {
+		res = crypto_compress_init(tfm);
+		if (res) {
 			pr_err("alg: pcomp: compression init failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
 		memset(result, 0, sizeof(result));
@@ -941,32 +1060,37 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 		req.next_out = result;
 		req.avail_out = ctemplate[i].outlen / 2;
 
-		error = crypto_compress_update(tfm, &req);
-		if (error && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_compress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: compression update failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Add remaining input data */
 		req.avail_in += (ctemplate[i].inlen + 1) / 2;
 
-		error = crypto_compress_update(tfm, &req);
-		if (error && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_compress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: compression update failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Provide remaining output space */
 		req.avail_out += COMP_BUF_SIZE - ctemplate[i].outlen / 2;
 
-		error = crypto_compress_final(tfm, &req);
-		if (error) {
+		res = crypto_compress_final(tfm, &req);
+		if (res < 0) {
 			pr_err("alg: pcomp: compression final failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		produced += res;
 
 		if (COMP_BUF_SIZE - req.avail_out != ctemplate[i].outlen) {
 			pr_err("alg: comp: Compression test %d failed for %s: "
@@ -976,6 +1100,13 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 			return -EINVAL;
 		}
 
+		if (produced != ctemplate[i].outlen) {
+			pr_err("alg: comp: Compression test %d failed for %s: "
+			       "returned len = %u (expected %d)\n", i + 1,
+			       algo, produced, ctemplate[i].outlen);
+			return -EINVAL;
+		}
+
 		if (memcmp(result, ctemplate[i].output, ctemplate[i].outlen)) {
 			pr_err("alg: pcomp: Compression test %d failed for "
 			       "%s\n", i + 1, algo);
@@ -986,21 +1117,21 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 
 	for (i = 0; i < dtcount; i++) {
 		struct comp_request req;
+		unsigned int produced = 0;
 
-		error = crypto_decompress_setup(tfm, dtemplate[i].params,
-						dtemplate[i].paramsize);
-		if (error) {
+		res = crypto_decompress_setup(tfm, dtemplate[i].params,
+					      dtemplate[i].paramsize);
+		if (res) {
 			pr_err("alg: pcomp: decompression setup failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
-		error = crypto_decompress_init(tfm);
-		if (error) {
+		res = crypto_decompress_init(tfm);
+		if (res) {
 			pr_err("alg: pcomp: decompression init failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
 		memset(result, 0, sizeof(result));
@@ -1010,35 +1141,38 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 		req.next_out = result;
 		req.avail_out = dtemplate[i].outlen / 2;
 
-		error = crypto_decompress_update(tfm, &req);
-		if (error  && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_decompress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: decompression update failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Add remaining input data */
 		req.avail_in += (dtemplate[i].inlen + 1) / 2;
 
-		error = crypto_decompress_update(tfm, &req);
-		if (error  && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_decompress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: decompression update failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Provide remaining output space */
 		req.avail_out += COMP_BUF_SIZE - dtemplate[i].outlen / 2;
 
-		error = crypto_decompress_final(tfm, &req);
-		if (error  && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_decompress_final(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: decompression final failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		if (COMP_BUF_SIZE - req.avail_out != dtemplate[i].outlen) {
 			pr_err("alg: comp: Decompression test %d failed for "
@@ -1048,6 +1182,13 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 			return -EINVAL;
 		}
 
+		if (produced != dtemplate[i].outlen) {
+			pr_err("alg: comp: Decompression test %d failed for "
+			       "%s: returned len = %u (expected %d)\n", i + 1,
+			       algo, produced, dtemplate[i].outlen);
+			return -EINVAL;
+		}
+
 		if (memcmp(result, dtemplate[i].output, dtemplate[i].outlen)) {
 			pr_err("alg: pcomp: Decompression test %d failed for "
 			       "%s\n", i + 1, algo);
@@ -1059,6 +1200,68 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 	return 0;
 }
 
+
+static int test_cprng(struct crypto_rng *tfm, struct cprng_testvec *template,
+		      unsigned int tcount)
+{
+	const char *algo = crypto_tfm_alg_driver_name(crypto_rng_tfm(tfm));
+	int err, i, j, seedsize;
+	u8 *seed;
+	char result[32];
+
+	seedsize = crypto_rng_seedsize(tfm);
+
+	seed = kmalloc(seedsize, GFP_KERNEL);
+	if (!seed) {
+		printk(KERN_ERR "alg: cprng: Failed to allocate seed space "
+		       "for %s\n", algo);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < tcount; i++) {
+		memset(result, 0, 32);
+
+		memcpy(seed, template[i].v, template[i].vlen);
+		memcpy(seed + template[i].vlen, template[i].key,
+		       template[i].klen);
+		memcpy(seed + template[i].vlen + template[i].klen,
+		       template[i].dt, template[i].dtlen);
+
+		err = crypto_rng_reset(tfm, seed, seedsize);
+		if (err) {
+			printk(KERN_ERR "alg: cprng: Failed to reset rng "
+			       "for %s\n", algo);
+			goto out;
+		}
+
+		for (j = 0; j < template[i].loops; j++) {
+			err = crypto_rng_get_bytes(tfm, result,
+						   template[i].rlen);
+			if (err != template[i].rlen) {
+				printk(KERN_ERR "alg: cprng: Failed to obtain "
+				       "the correct amount of random data for "
+				       "%s (requested %d, got %d)\n", algo,
+				       template[i].rlen, err);
+				goto out;
+			}
+		}
+
+		err = memcmp(result, template[i].result,
+			     template[i].rlen);
+		if (err) {
+			printk(KERN_ERR "alg: cprng: Test %d failed for %s\n",
+			       i, algo);
+			hexdump(result, template[i].rlen);
+			err = -EINVAL;
+			goto out;
+		}
+	}
+
+out:
+	kfree(seed);
+	return err;
+}
+
 static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
 			 u32 type, u32 mask)
 {
@@ -1258,11 +1461,42 @@ out:
 	return err;
 }
 
+static int alg_test_cprng(const struct alg_test_desc *desc, const char *driver,
+			  u32 type, u32 mask)
+{
+	struct crypto_rng *rng;
+	int err;
+
+	rng = crypto_alloc_rng(driver, type, mask);
+	if (IS_ERR(rng)) {
+		printk(KERN_ERR "alg: cprng: Failed to load transform for %s: "
+		       "%ld\n", driver, PTR_ERR(rng));
+		return PTR_ERR(rng);
+	}
+
+	err = test_cprng(rng, desc->suite.cprng.vecs, desc->suite.cprng.count);
+
+	crypto_free_rng(rng);
+
+	return err;
+}
+
 /* Please keep this list sorted by algorithm name. */
 static const struct alg_test_desc alg_test_descs[] = {
 	{
+		.alg = "ansi_cprng",
+		.test = alg_test_cprng,
+		.fips_allowed = 1,
+		.suite = {
+			.cprng = {
+				.vecs = ansi_cprng_aes_tv_template,
+				.count = ANSI_CPRNG_AES_TEST_VECTORS
+			}
+		}
+	}, {
 		.alg = "cbc(aes)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1338,6 +1572,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "cbc(des3_ede)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1368,6 +1603,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ccm(aes)",
 		.test = alg_test_aead,
+		.fips_allowed = 1,
 		.suite = {
 			.aead = {
 				.enc = {
@@ -1383,6 +1619,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "crc32c",
 		.test = alg_test_crc32c,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = crc32c_tv_template,
@@ -1390,6 +1627,22 @@ static const struct alg_test_desc alg_test_descs[] = {
 			}
 		}
 	}, {
+		.alg = "ctr(aes)",
+		.test = alg_test_skcipher,
+		.fips_allowed = 1,
+		.suite = {
+			.cipher = {
+				.enc = {
+					.vecs = aes_ctr_enc_tv_template,
+					.count = AES_CTR_ENC_TEST_VECTORS
+				},
+				.dec = {
+					.vecs = aes_ctr_dec_tv_template,
+					.count = AES_CTR_DEC_TEST_VECTORS
+				}
+			}
+		}
+	}, {
 		.alg = "cts(cbc(aes))",
 		.test = alg_test_skcipher,
 		.suite = {
@@ -1422,6 +1675,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecb(aes)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1527,6 +1781,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecb(des)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1542,6 +1797,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecb(des3_ede)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1677,6 +1933,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "gcm(aes)",
 		.test = alg_test_aead,
+		.fips_allowed = 1,
 		.suite = {
 			.aead = {
 				.enc = {
@@ -1719,6 +1976,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha1)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha1_tv_template,
@@ -1728,6 +1986,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha224)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha224_tv_template,
@@ -1737,6 +1996,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha256)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha256_tv_template,
@@ -1746,6 +2006,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha384)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha384_tv_template,
@@ -1755,6 +2016,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha512)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha512_tv_template,
@@ -1836,15 +2098,32 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "rfc3686(ctr(aes))",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
-					.vecs = aes_ctr_enc_tv_template,
-					.count = AES_CTR_ENC_TEST_VECTORS
+					.vecs = aes_ctr_rfc3686_enc_tv_template,
+					.count = AES_CTR_3686_ENC_TEST_VECTORS
 				},
 				.dec = {
-					.vecs = aes_ctr_dec_tv_template,
-					.count = AES_CTR_DEC_TEST_VECTORS
+					.vecs = aes_ctr_rfc3686_dec_tv_template,
+					.count = AES_CTR_3686_DEC_TEST_VECTORS
+				}
+			}
+		}
+	}, {
+		.alg = "rfc4309(ccm(aes))",
+		.test = alg_test_aead,
+		.fips_allowed = 1,
+		.suite = {
+			.aead = {
+				.enc = {
+					.vecs = aes_ccm_rfc4309_enc_tv_template,
+					.count = AES_CCM_4309_ENC_TEST_VECTORS
+				},
+				.dec = {
+					.vecs = aes_ccm_rfc4309_dec_tv_template,
+					.count = AES_CCM_4309_DEC_TEST_VECTORS
 				}
 			}
 		}
@@ -1898,6 +2177,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha1",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha1_tv_template,
@@ -1907,6 +2187,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha224",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha224_tv_template,
@@ -1916,6 +2197,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha256",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha256_tv_template,
@@ -1925,6 +2207,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha384",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha384_tv_template,
@@ -1934,6 +2217,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha512",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha512_tv_template,
@@ -2077,60 +2361,36 @@ int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
 		if (i < 0)
 			goto notest;
 
-		return alg_test_cipher(alg_test_descs + i, driver, type, mask);
+		if (fips_enabled && !alg_test_descs[i].fips_allowed)
+			goto non_fips_alg;
+
+		rc = alg_test_cipher(alg_test_descs + i, driver, type, mask);
+		goto test_done;
 	}
 
 	i = alg_find_test(alg);
 	if (i < 0)
 		goto notest;
 
+	if (fips_enabled && !alg_test_descs[i].fips_allowed)
+		goto non_fips_alg;
+
 	rc = alg_test_descs[i].test(alg_test_descs + i, driver,
 				      type, mask);
+test_done:
 	if (fips_enabled && rc)
 		panic("%s: %s alg self test failed in fips mode!\n", driver, alg);
 
+	if (fips_enabled && !rc)
+		printk(KERN_INFO "alg: self-tests for %s (%s) passed\n",
+		       driver, alg);
+
 	return rc;
 
 notest:
 	printk(KERN_INFO "alg: No test for %s (%s)\n", alg, driver);
 	return 0;
+non_fips_alg:
+	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(alg_test);
-
-int __init testmgr_init(void)
-{
-	int i;
-
-	for (i = 0; i < XBUFSIZE; i++) {
-		xbuf[i] = (void *)__get_free_page(GFP_KERNEL);
-		if (!xbuf[i])
-			goto err_free_xbuf;
-	}
-
-	for (i = 0; i < XBUFSIZE; i++) {
-		axbuf[i] = (void *)__get_free_page(GFP_KERNEL);
-		if (!axbuf[i])
-			goto err_free_axbuf;
-	}
-
-	return 0;
-
-err_free_axbuf:
-	for (i = 0; i < XBUFSIZE && axbuf[i]; i++)
-		free_page((unsigned long)axbuf[i]);
-err_free_xbuf:
-	for (i = 0; i < XBUFSIZE && xbuf[i]; i++)
-		free_page((unsigned long)xbuf[i]);
-
-	return -ENOMEM;
-}
-
-void testmgr_exit(void)
-{
-	int i;
-
-	for (i = 0; i < XBUFSIZE; i++)
-		free_page((unsigned long)axbuf[i]);
-	for (i = 0; i < XBUFSIZE; i++)
-		free_page((unsigned long)xbuf[i]);
-}
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index 526f00a9c72..69316228fc1 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -62,6 +62,7 @@ struct aead_testvec {
 	int np;
 	int anp;
 	unsigned char fail;
+	unsigned char novrfy;	/* ccm dec verification failure expected */
 	unsigned char wk; /* weak key flag */
 	unsigned char klen;
 	unsigned short ilen;
@@ -69,6 +70,18 @@ struct aead_testvec {
 	unsigned short rlen;
 };
 
+struct cprng_testvec {
+	char *key;
+	char *dt;
+	char *v;
+	char *result;
+	unsigned char klen;
+	unsigned short dtlen;
+	unsigned short vlen;
+	unsigned short rlen;
+	unsigned short loops;
+};
+
 static char zeroed_string[48];
 
 /*
@@ -2841,12 +2854,16 @@ static struct cipher_testvec cast6_dec_tv_template[] = {
 #define AES_LRW_DEC_TEST_VECTORS 8
 #define AES_XTS_ENC_TEST_VECTORS 4
 #define AES_XTS_DEC_TEST_VECTORS 4
-#define AES_CTR_ENC_TEST_VECTORS 7
-#define AES_CTR_DEC_TEST_VECTORS 6
+#define AES_CTR_ENC_TEST_VECTORS 3
+#define AES_CTR_DEC_TEST_VECTORS 3
+#define AES_CTR_3686_ENC_TEST_VECTORS 7
+#define AES_CTR_3686_DEC_TEST_VECTORS 6
 #define AES_GCM_ENC_TEST_VECTORS 9
 #define AES_GCM_DEC_TEST_VECTORS 8
 #define AES_CCM_ENC_TEST_VECTORS 7
 #define AES_CCM_DEC_TEST_VECTORS 7
+#define AES_CCM_4309_ENC_TEST_VECTORS 7
+#define AES_CCM_4309_DEC_TEST_VECTORS 10
 
 static struct cipher_testvec aes_enc_tv_template[] = {
 	{ /* From FIPS-197 */
@@ -3983,6 +4000,164 @@ static struct cipher_testvec aes_xts_dec_tv_template[] = {
 
 
 static struct cipher_testvec aes_ctr_enc_tv_template[] = {
+	{ /* From NIST Special Publication 800-38A, Appendix F.5 */
+		.key	= "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+			  "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+		.klen	= 16,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ilen	= 64,
+		.result	= "\x87\x4d\x61\x91\xb6\x20\xe3\x26"
+			  "\x1b\xef\x68\x64\x99\x0d\xb6\xce"
+			  "\x98\x06\xf6\x6b\x79\x70\xfd\xff"
+			  "\x86\x17\x18\x7b\xb9\xff\xfd\xff"
+			  "\x5a\xe4\xdf\x3e\xdb\xd5\xd3\x5e"
+			  "\x5b\x4f\x09\x02\x0d\xb0\x3e\xab"
+			  "\x1e\x03\x1d\xda\x2f\xbe\x03\xd1"
+			  "\x79\x21\x70\xa0\xf3\x00\x9c\xee",
+		.rlen	= 64,
+	}, {
+		.key	= "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+			  "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+			  "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+		.klen	= 24,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ilen	= 64,
+		.result	= "\x1a\xbc\x93\x24\x17\x52\x1c\xa2"
+			  "\x4f\x2b\x04\x59\xfe\x7e\x6e\x0b"
+			  "\x09\x03\x39\xec\x0a\xa6\xfa\xef"
+			  "\xd5\xcc\xc2\xc6\xf4\xce\x8e\x94"
+			  "\x1e\x36\xb2\x6b\xd1\xeb\xc6\x70"
+			  "\xd1\xbd\x1d\x66\x56\x20\xab\xf7"
+			  "\x4f\x78\xa7\xf6\xd2\x98\x09\x58"
+			  "\x5a\x97\xda\xec\x58\xc6\xb0\x50",
+		.rlen	= 64,
+	}, {
+		.key	= "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+			  "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+			  "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+			  "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+		.klen	= 32,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ilen	= 64,
+		.result	= "\x60\x1e\xc3\x13\x77\x57\x89\xa5"
+			  "\xb7\xa7\xf5\x04\xbb\xf3\xd2\x28"
+			  "\xf4\x43\xe3\xca\x4d\x62\xb5\x9a"
+			  "\xca\x84\xe9\x90\xca\xca\xf5\xc5"
+			  "\x2b\x09\x30\xda\xa2\x3d\xe9\x4c"
+			  "\xe8\x70\x17\xba\x2d\x84\x98\x8d"
+			  "\xdf\xc9\xc5\x8d\xb6\x7a\xad\xa6"
+			  "\x13\xc2\xdd\x08\x45\x79\x41\xa6",
+		.rlen	= 64,
+	}
+};
+
+static struct cipher_testvec aes_ctr_dec_tv_template[] = {
+	{ /* From NIST Special Publication 800-38A, Appendix F.5 */
+		.key	= "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+			  "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+		.klen	= 16,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x87\x4d\x61\x91\xb6\x20\xe3\x26"
+			  "\x1b\xef\x68\x64\x99\x0d\xb6\xce"
+			  "\x98\x06\xf6\x6b\x79\x70\xfd\xff"
+			  "\x86\x17\x18\x7b\xb9\xff\xfd\xff"
+			  "\x5a\xe4\xdf\x3e\xdb\xd5\xd3\x5e"
+			  "\x5b\x4f\x09\x02\x0d\xb0\x3e\xab"
+			  "\x1e\x03\x1d\xda\x2f\xbe\x03\xd1"
+			  "\x79\x21\x70\xa0\xf3\x00\x9c\xee",
+		.ilen	= 64,
+		.result	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.rlen	= 64,
+	}, {
+		.key	= "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+			  "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+			  "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+		.klen	= 24,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x1a\xbc\x93\x24\x17\x52\x1c\xa2"
+			  "\x4f\x2b\x04\x59\xfe\x7e\x6e\x0b"
+			  "\x09\x03\x39\xec\x0a\xa6\xfa\xef"
+			  "\xd5\xcc\xc2\xc6\xf4\xce\x8e\x94"
+			  "\x1e\x36\xb2\x6b\xd1\xeb\xc6\x70"
+			  "\xd1\xbd\x1d\x66\x56\x20\xab\xf7"
+			  "\x4f\x78\xa7\xf6\xd2\x98\x09\x58"
+			  "\x5a\x97\xda\xec\x58\xc6\xb0\x50",
+		.ilen	= 64,
+		.result	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.rlen	= 64,
+	}, {
+		.key	= "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+			  "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+			  "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+			  "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+		.klen	= 32,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x60\x1e\xc3\x13\x77\x57\x89\xa5"
+			  "\xb7\xa7\xf5\x04\xbb\xf3\xd2\x28"
+			  "\xf4\x43\xe3\xca\x4d\x62\xb5\x9a"
+			  "\xca\x84\xe9\x90\xca\xca\xf5\xc5"
+			  "\x2b\x09\x30\xda\xa2\x3d\xe9\x4c"
+			  "\xe8\x70\x17\xba\x2d\x84\x98\x8d"
+			  "\xdf\xc9\xc5\x8d\xb6\x7a\xad\xa6"
+			  "\x13\xc2\xdd\x08\x45\x79\x41\xa6",
+		.ilen	= 64,
+		.result	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.rlen	= 64,
+	}
+};
+
+static struct cipher_testvec aes_ctr_rfc3686_enc_tv_template[] = {
 	{ /* From RFC 3686 */
 		.key	= "\xae\x68\x52\xf8\x12\x10\x67\xcc"
 			  "\x4b\xf7\xa5\x76\x55\x77\xf3\x9e"
@@ -5114,7 +5289,7 @@ static struct cipher_testvec aes_ctr_enc_tv_template[] = {
 	},
 };
 
-static struct cipher_testvec aes_ctr_dec_tv_template[] = {
+static struct cipher_testvec aes_ctr_rfc3686_dec_tv_template[] = {
 	{ /* From RFC 3686 */
 		.key	= "\xae\x68\x52\xf8\x12\x10\x67\xcc"
 			  "\x4b\xf7\xa5\x76\x55\x77\xf3\x9e"
@@ -5825,6 +6000,470 @@ static struct aead_testvec aes_ccm_dec_tv_template[] = {
 	},
 };
 
+/*
+ * rfc4309 refers to section 8 of rfc3610 for test vectors, but they all
+ * use a 13-byte nonce, we only support an 11-byte nonce. Similarly, all of
+ * Special Publication 800-38C's test vectors also use nonce lengths our
+ * implementation doesn't support. The following are taken from fips cavs
+ * fax files on hand at Red Hat.
+ *
+ * nb: actual key lengths are (klen - 3), the last 3 bytes are actually
+ * part of the nonce which combine w/the iv, but need to be input this way.
+ */
+static struct aead_testvec aes_ccm_rfc4309_enc_tv_template[] = {
+	{
+		.key	= "\x83\xac\x54\x66\xc2\xeb\xe5\x05"
+			  "\x2e\x01\xd1\xfc\x5d\x82\x66\x2e"
+			  "\x96\xac\x59",
+		.klen	= 19,
+		.iv	= "\x30\x07\xa1\xe2\xa2\xc7\x55\x24",
+		.alen	= 0,
+		.input	= "\x19\xc8\x81\xf6\xe9\x86\xff\x93"
+			  "\x0b\x78\x67\xe5\xbb\xb7\xfc\x6e"
+			  "\x83\x77\xb3\xa6\x0c\x8c\x9f\x9c"
+			  "\x35\x2e\xad\xe0\x62\xf9\x91\xa1",
+		.ilen	= 32,
+		.result	= "\xab\x6f\xe1\x69\x1d\x19\x99\xa8"
+			  "\x92\xa0\xc4\x6f\x7e\xe2\x8b\xb1"
+			  "\x70\xbb\x8c\xa6\x4c\x6e\x97\x8a"
+			  "\x57\x2b\xbe\x5d\x98\xa6\xb1\x32"
+			  "\xda\x24\xea\xd9\xa1\x39\x98\xfd"
+			  "\xa4\xbe\xd9\xf2\x1a\x6d\x22\xa8",
+		.rlen	= 48,
+	}, {
+		.key	= "\x1e\x2c\x7e\x01\x41\x9a\xef\xc0"
+			  "\x0d\x58\x96\x6e\x5c\xa2\x4b\xd3"
+			  "\x4f\xa3\x19",
+		.klen	= 19,
+		.iv	= "\xd3\x01\x5a\xd8\x30\x60\x15\x56",
+		.assoc	= "\xda\xe6\x28\x9c\x45\x2d\xfd\x63"
+			  "\x5e\xda\x4c\xb6\xe6\xfc\xf9\xb7"
+			  "\x0c\x56\xcb\xe4\xe0\x05\x7a\xe1"
+			  "\x0a\x63\x09\x78\xbc\x2c\x55\xde",
+		.alen	= 32,
+		.input	= "\x87\xa3\x36\xfd\x96\xb3\x93\x78"
+			  "\xa9\x28\x63\xba\x12\xa3\x14\x85"
+			  "\x57\x1e\x06\xc9\x7b\x21\xef\x76"
+			  "\x7f\x38\x7e\x8e\x29\xa4\x3e\x7e",
+		.ilen	= 32,
+		.result	= "\x8a\x1e\x11\xf0\x02\x6b\xe2\x19"
+			  "\xfc\x70\xc4\x6d\x8e\xb7\x99\xab"
+			  "\xc5\x4b\xa2\xac\xd3\xf3\x48\xff"
+			  "\x3b\xb5\xce\x53\xef\xde\xbb\x02"
+			  "\xa9\x86\x15\x6c\x13\xfe\xda\x0a"
+			  "\x22\xb8\x29\x3d\xd8\x39\x9a\x23",
+		.rlen	= 48,
+	}, {
+		.key	= "\xf4\x6b\xc2\x75\x62\xfe\xb4\xe1"
+			  "\xa3\xf0\xff\xdd\x4e\x4b\x12\x75"
+			  "\x53\x14\x73\x66\x8d\x88\xf6\x80"
+			  "\xa0\x20\x35",
+		.klen	= 27,
+		.iv	= "\x26\xf2\x21\x8d\x50\x20\xda\xe2",
+		.assoc	= "\x5b\x9e\x13\x67\x02\x5e\xef\xc1"
+			  "\x6c\xf9\xd7\x1e\x52\x8f\x7a\x47"
+			  "\xe9\xd4\xcf\x20\x14\x6e\xf0\x2d"
+			  "\xd8\x9e\x2b\x56\x10\x23\x56\xe7",
+		.alen	= 32,
+		.ilen	= 0,
+		.result	= "\x36\xea\x7a\x70\x08\xdc\x6a\xbc"
+			  "\xad\x0c\x7a\x63\xf6\x61\xfd\x9b",
+		.rlen	= 16,
+	}, {
+		.key	= "\x56\xdf\x5c\x8f\x26\x3f\x0e\x42"
+			  "\xef\x7a\xd3\xce\xfc\x84\x60\x62"
+			  "\xca\xb4\x40\xaf\x5f\xc9\xc9\x01"
+			  "\xd6\x3c\x8c",
+		.klen	= 27,
+		.iv	= "\x86\x84\xb6\xcd\xef\x09\x2e\x94",
+		.assoc	= "\x02\x65\x78\x3c\xe9\x21\x30\x91"
+			  "\xb1\xb9\xda\x76\x9a\x78\x6d\x95"
+			  "\xf2\x88\x32\xa3\xf2\x50\xcb\x4c"
+			  "\xe3\x00\x73\x69\x84\x69\x87\x79",
+		.alen	= 32,
+		.input	= "\x9f\xd2\x02\x4b\x52\x49\x31\x3c"
+			  "\x43\x69\x3a\x2d\x8e\x70\xad\x7e"
+			  "\xe0\xe5\x46\x09\x80\x89\x13\xb2"
+			  "\x8c\x8b\xd9\x3f\x86\xfb\xb5\x6b",
+		.ilen	= 32,
+		.result	= "\x39\xdf\x7c\x3c\x5a\x29\xb9\x62"
+			  "\x5d\x51\xc2\x16\xd8\xbd\x06\x9f"
+			  "\x9b\x6a\x09\x70\xc1\x51\x83\xc2"
+			  "\x66\x88\x1d\x4f\x9a\xda\xe0\x1e"
+			  "\xc7\x79\x11\x58\xe5\x6b\x20\x40"
+			  "\x7a\xea\x46\x42\x8b\xe4\x6f\xe1",
+		.rlen	= 48,
+	}, {
+		.key	= "\xe0\x8d\x99\x71\x60\xd7\x97\x1a"
+			  "\xbd\x01\x99\xd5\x8a\xdf\x71\x3a"
+			  "\xd3\xdf\x24\x4b\x5e\x3d\x4b\x4e"
+			  "\x30\x7a\xb9\xd8\x53\x0a\x5e\x2b"
+			  "\x1e\x29\x91",
+		.klen	= 35,
+		.iv	= "\xad\x8e\xc1\x53\x0a\xcf\x2d\xbe",
+		.assoc	= "\x19\xb6\x1f\x57\xc4\xf3\xf0\x8b"
+			  "\x78\x2b\x94\x02\x29\x0f\x42\x27"
+			  "\x6b\x75\xcb\x98\x34\x08\x7e\x79"
+			  "\xe4\x3e\x49\x0d\x84\x8b\x22\x87",
+		.alen	= 32,
+		.input	= "\xe1\xd9\xd8\x13\xeb\x3a\x75\x3f"
+			  "\x9d\xbd\x5f\x66\xbe\xdc\xbb\x66"
+			  "\xbf\x17\x99\x62\x4a\x39\x27\x1f"
+			  "\x1d\xdc\x24\xae\x19\x2f\x98\x4c",
+		.ilen	= 32,
+		.result	= "\x19\xb8\x61\x33\x45\x2b\x43\x96"
+			  "\x6f\x51\xd0\x20\x30\x7d\x9b\xc6"
+			  "\x26\x3d\xf8\xc9\x65\x16\xa8\x9f"
+			  "\xf0\x62\x17\x34\xf2\x1e\x8d\x75"
+			  "\x4e\x13\xcc\xc0\xc3\x2a\x54\x2d",
+		.rlen	= 40,
+	}, {
+		.key	= "\x7c\xc8\x18\x3b\x8d\x99\xe0\x7c"
+			  "\x45\x41\xb8\xbd\x5c\xa7\xc2\x32"
+			  "\x8a\xb8\x02\x59\xa4\xfe\xa9\x2c"
+			  "\x09\x75\x9a\x9b\x3c\x9b\x27\x39"
+			  "\xf9\xd9\x4e",
+		.klen	= 35,
+		.iv	= "\x63\xb5\x3d\x9d\x43\xf6\x1e\x50",
+		.assoc	= "\x57\xf5\x6b\x8b\x57\x5c\x3d\x3b"
+			  "\x13\x02\x01\x0c\x83\x4c\x96\x35"
+			  "\x8e\xd6\x39\xcf\x7d\x14\x9b\x94"
+			  "\xb0\x39\x36\xe6\x8f\x57\xe0\x13",
+		.alen	= 32,
+		.input	= "\x3b\x6c\x29\x36\xb6\xef\x07\xa6"
+			  "\x83\x72\x07\x4f\xcf\xfa\x66\x89"
+			  "\x5f\xca\xb1\xba\xd5\x8f\x2c\x27"
+			  "\x30\xdb\x75\x09\x93\xd4\x65\xe4",
+		.ilen	= 32,
+		.result	= "\xb0\x88\x5a\x33\xaa\xe5\xc7\x1d"
+			  "\x85\x23\xc7\xc6\x2f\xf4\x1e\x3d"
+			  "\xcc\x63\x44\x25\x07\x78\x4f\x9e"
+			  "\x96\xb8\x88\xeb\xbc\x48\x1f\x06"
+			  "\x39\xaf\x39\xac\xd8\x4a\x80\x39"
+			  "\x7b\x72\x8a\xf7",
+		.rlen	= 44,
+	}, {
+		.key	= "\xab\xd0\xe9\x33\x07\x26\xe5\x83"
+			  "\x8c\x76\x95\xd4\xb6\xdc\xf3\x46"
+			  "\xf9\x8f\xad\xe3\x02\x13\x83\x77"
+			  "\x3f\xb0\xf1\xa1\xa1\x22\x0f\x2b"
+			  "\x24\xa7\x8b",
+		.klen	= 35,
+		.iv	= "\x07\xcb\xcc\x0e\xe6\x33\xbf\xf5",
+		.assoc	= "\xd4\xdb\x30\x1d\x03\xfe\xfd\x5f"
+			  "\x87\xd4\x8c\xb6\xb6\xf1\x7a\x5d"
+			  "\xab\x90\x65\x8d\x8e\xca\x4d\x4f"
+			  "\x16\x0c\x40\x90\x4b\xc7\x36\x73",
+		.alen	= 32,
+		.input	= "\xf5\xc6\x7d\x48\xc1\xb7\xe6\x92"
+			  "\x97\x5a\xca\xc4\xa9\x6d\xf9\x3d"
+			  "\x6c\xde\xbc\xf1\x90\xea\x6a\xb2"
+			  "\x35\x86\x36\xaf\x5c\xfe\x4b\x3a",
+		.ilen	= 32,
+		.result	= "\x83\x6f\x40\x87\x72\xcf\xc1\x13"
+			  "\xef\xbb\x80\x21\x04\x6c\x58\x09"
+			  "\x07\x1b\xfc\xdf\xc0\x3f\x5b\xc7"
+			  "\xe0\x79\xa8\x6e\x71\x7c\x3f\xcf"
+			  "\x5c\xda\xb2\x33\xe5\x13\xe2\x0d"
+			  "\x74\xd1\xef\xb5\x0f\x3a\xb5\xf8",
+		.rlen	= 48,
+	},
+};
+
+static struct aead_testvec aes_ccm_rfc4309_dec_tv_template[] = {
+	{
+		.key	= "\xab\x2f\x8a\x74\xb7\x1c\xd2\xb1"
+			  "\xff\x80\x2e\x48\x7d\x82\xf8\xb9"
+			  "\xc6\xfb\x7d",
+		.klen	= 19,
+		.iv	= "\x80\x0d\x13\xab\xd8\xa6\xb2\xd8",
+		.alen	= 0,
+		.input	= "\xd5\xe8\x93\x9f\xc7\x89\x2e\x2b",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+		.novrfy	= 1,
+	}, {
+		.key	= "\xab\x2f\x8a\x74\xb7\x1c\xd2\xb1"
+			  "\xff\x80\x2e\x48\x7d\x82\xf8\xb9"
+			  "\xaf\x94\x87",
+		.klen	= 19,
+		.iv	= "\x78\x35\x82\x81\x7f\x88\x94\x68",
+		.alen	= 0,
+		.input	= "\x41\x3c\xb8\x87\x73\xcb\xf3\xf3",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+	}, {
+		.key	= "\x61\x0e\x8c\xae\xe3\x23\xb6\x38"
+			  "\x76\x1c\xf6\x3a\x67\xa3\x9c\xd8"
+			  "\xc6\xfb\x7d",
+		.klen	= 19,
+		.iv	= "\x80\x0d\x13\xab\xd8\xa6\xb2\xd8",
+		.assoc	= "\xf3\x94\x87\x78\x35\x82\x81\x7f"
+			  "\x88\x94\x68\xb1\x78\x6b\x2b\xd6"
+			  "\x04\x1f\x4e\xed\x78\xd5\x33\x66"
+			  "\xd8\x94\x99\x91\x81\x54\x62\x57",
+		.alen	= 32,
+		.input	= "\xf0\x7c\x29\x02\xae\x1c\x2f\x55"
+			  "\xd0\xd1\x3d\x1a\xa3\x6d\xe4\x0a"
+			  "\x86\xb0\x87\x6b\x62\x33\x8c\x34"
+			  "\xce\xab\x57\xcc\x79\x0b\xe0\x6f"
+			  "\x5c\x3e\x48\x1f\x6c\x46\xf7\x51"
+			  "\x8b\x84\x83\x2a\xc1\x05\xb8\xc5",
+		.ilen	= 48,
+		.result	= "\x50\x82\x3e\x07\xe2\x1e\xb6\xfb"
+			  "\x33\xe4\x73\xce\xd2\xfb\x95\x79"
+			  "\xe8\xb4\xb5\x77\x11\x10\x62\x6f"
+			  "\x6a\x82\xd1\x13\xec\xf5\xd0\x48",
+		.rlen	= 32,
+		.novrfy	= 1,
+	}, {
+		.key	= "\x61\x0e\x8c\xae\xe3\x23\xb6\x38"
+			  "\x76\x1c\xf6\x3a\x67\xa3\x9c\xd8"
+			  "\x05\xe0\xc9",
+		.klen	= 19,
+		.iv	= "\x0f\xed\x34\xea\x97\xd4\x3b\xdf",
+		.assoc	= "\x49\x5c\x50\x1f\x1d\x94\xcc\x81"
+			  "\xba\xb7\xb6\x03\xaf\xa5\xc1\xa1"
+			  "\xd8\x5c\x42\x68\xe0\x6c\xda\x89"
+			  "\x05\xac\x56\xac\x1b\x2a\xd3\x86",
+		.alen	= 32,
+		.input	= "\x39\xbe\x7d\x15\x62\x77\xf3\x3c"
+			  "\xad\x83\x52\x6d\x71\x03\x25\x1c"
+			  "\xed\x81\x3a\x9a\x16\x7d\x19\x80"
+			  "\x72\x04\x72\xd0\xf6\xff\x05\x0f"
+			  "\xb7\x14\x30\x00\x32\x9e\xa0\xa6"
+			  "\x9e\x5a\x18\xa1\xb8\xfe\xdb\xd3",
+		.ilen	= 48,
+		.result	= "\x75\x05\xbe\xc2\xd9\x1e\xde\x60"
+			  "\x47\x3d\x8c\x7d\xbd\xb5\xd9\xb7"
+			  "\xf2\xae\x61\x05\x8f\x82\x24\x3f"
+			  "\x9c\x67\x91\xe1\x38\x4f\xe4\x0c",
+		.rlen	= 32,
+	}, {
+		.key	= "\x39\xbb\xa7\xbe\x59\x97\x9e\x73"
+			  "\xa2\xbc\x6b\x98\xd7\x75\x7f\xe3"
+			  "\xa4\x48\x93\x39\x26\x71\x4a\xc6"
+			  "\xee\x49\x83",
+		.klen	= 27,
+		.iv	= "\xe9\xa9\xff\xe9\x57\xba\xfd\x9e",
+		.assoc	= "\x44\xa6\x2c\x05\xe9\xe1\x43\xb1"
+			  "\x58\x7c\xf2\x5c\x6d\x39\x0a\x64"
+			  "\xa4\xf0\x13\x05\xd1\x77\x99\x67"
+			  "\x11\xc4\xc6\xdb\x00\x56\x36\x61",
+		.alen	= 32,
+		.input	= "\x71\x99\xfa\xf4\x44\x12\x68\x9b",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+	}, {
+		.key	= "\x58\x5d\xa0\x96\x65\x1a\x04\xd7"
+			  "\x96\xe5\xc5\x68\xaa\x95\x35\xe0"
+			  "\x29\xa0\xba\x9e\x48\x78\xd1\xba"
+			  "\xee\x49\x83",
+		.klen	= 27,
+		.iv	= "\xe9\xa9\xff\xe9\x57\xba\xfd\x9e",
+		.assoc	= "\x44\xa6\x2c\x05\xe9\xe1\x43\xb1"
+			  "\x58\x7c\xf2\x5c\x6d\x39\x0a\x64"
+			  "\xa4\xf0\x13\x05\xd1\x77\x99\x67"
+			  "\x11\xc4\xc6\xdb\x00\x56\x36\x61",
+		.alen	= 32,
+		.input	= "\xfb\xe5\x5d\x34\xbe\xe5\xe8\xe7"
+			  "\x5a\xef\x2f\xbf\x1f\x7f\xd4\xb2"
+			  "\x66\xca\x61\x1e\x96\x7a\x61\xb3"
+			  "\x1c\x16\x45\x52\xba\x04\x9c\x9f"
+			  "\xb1\xd2\x40\xbc\x52\x7c\x6f\xb1",
+		.ilen	= 40,
+		.result	= "\x85\x34\x66\x42\xc8\x92\x0f\x36"
+			  "\x58\xe0\x6b\x91\x3c\x98\x5c\xbb"
+			  "\x0a\x85\xcc\x02\xad\x7a\x96\xe9"
+			  "\x65\x43\xa4\xc3\x0f\xdc\x55\x81",
+		.rlen	= 32,
+	}, {
+		.key	= "\x58\x5d\xa0\x96\x65\x1a\x04\xd7"
+			  "\x96\xe5\xc5\x68\xaa\x95\x35\xe0"
+			  "\x29\xa0\xba\x9e\x48\x78\xd1\xba"
+			  "\xd1\xfc\x57",
+		.klen	= 27,
+		.iv	= "\x9c\xfe\xb8\x9c\xad\x71\xaa\x1f",
+		.assoc	= "\x86\x67\xa5\xa9\x14\x5f\x0d\xc6"
+			  "\xff\x14\xc7\x44\xbf\x6c\x3a\xc3"
+			  "\xff\xb6\x81\xbd\xe2\xd5\x06\xc7"
+			  "\x3c\xa1\x52\x13\x03\x8a\x23\x3a",
+		.alen	= 32,
+		.input	= "\x3f\x66\xb0\x9d\xe5\x4b\x38\x00"
+			  "\xc6\x0e\x6e\xe5\xd6\x98\xa6\x37"
+			  "\x8c\x26\x33\xc6\xb2\xa2\x17\xfa"
+			  "\x64\x19\xc0\x30\xd7\xfc\x14\x6b"
+			  "\xe3\x33\xc2\x04\xb0\x37\xbe\x3f"
+			  "\xa9\xb4\x2d\x68\x03\xa3\x44\xef",
+		.ilen	= 48,
+		.result	= "\x02\x87\x4d\x28\x80\x6e\xb2\xed"
+			  "\x99\x2a\xa8\xca\x04\x25\x45\x90"
+			  "\x1d\xdd\x5a\xd9\xe4\xdb\x9c\x9c"
+			  "\x49\xe9\x01\xfe\xa7\x80\x6d\x6b",
+		.rlen	= 32,
+		.novrfy	= 1,
+	}, {
+		.key	= "\xa4\x4b\x54\x29\x0a\xb8\x6d\x01"
+			  "\x5b\x80\x2a\xcf\x25\xc4\xb7\x5c"
+			  "\x20\x2c\xad\x30\xc2\x2b\x41\xfb"
+			  "\x0e\x85\xbc\x33\xad\x0f\x2b\xff"
+			  "\xee\x49\x83",
+		.klen	= 35,
+		.iv	= "\xe9\xa9\xff\xe9\x57\xba\xfd\x9e",
+		.alen	= 0,
+		.input	= "\x1f\xb8\x8f\xa3\xdd\x54\x00\xf2",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+	}, {
+		.key	= "\x39\xbb\xa7\xbe\x59\x97\x9e\x73"
+			  "\xa2\xbc\x6b\x98\xd7\x75\x7f\xe3"
+			  "\xa4\x48\x93\x39\x26\x71\x4a\xc6"
+			  "\xae\x8f\x11\x4c\xc2\x9c\x4a\xbb"
+			  "\x85\x34\x66",
+		.klen	= 35,
+		.iv	= "\x42\xc8\x92\x0f\x36\x58\xe0\x6b",
+		.alen	= 0,
+		.input	= "\x48\x01\x5e\x02\x24\x04\x66\x47"
+			  "\xa1\xea\x6f\xaf\xe8\xfc\xfb\xdd"
+			  "\xa5\xa9\x87\x8d\x84\xee\x2e\x77"
+			  "\xbb\x86\xb9\xf5\x5c\x6c\xff\xf6"
+			  "\x72\xc3\x8e\xf7\x70\xb1\xb2\x07"
+			  "\xbc\xa8\xa3\xbd\x83\x7c\x1d\x2a",
+		.ilen	= 48,
+		.result	= "\xdc\x56\xf2\x71\xb0\xb1\xa0\x6c"
+			  "\xf0\x97\x3a\xfb\x6d\xe7\x32\x99"
+			  "\x3e\xaf\x70\x5e\xb2\x4d\xea\x39"
+			  "\x89\xd4\x75\x7a\x63\xb1\xda\x93",
+		.rlen	= 32,
+		.novrfy	= 1,
+	}, {
+		.key	= "\x58\x5d\xa0\x96\x65\x1a\x04\xd7"
+			  "\x96\xe5\xc5\x68\xaa\x95\x35\xe0"
+			  "\x29\xa0\xba\x9e\x48\x78\xd1\xba"
+			  "\x0d\x1a\x53\x3b\xb5\xe3\xf8\x8b"
+			  "\xcf\x76\x3f",
+		.klen	= 35,
+		.iv	= "\xd9\x95\x75\x8f\x44\x89\x40\x7b",
+		.assoc	= "\x8f\x86\x6c\x4d\x1d\xc5\x39\x88"
+			  "\xc8\xf3\x5c\x52\x10\x63\x6f\x2b"
+			  "\x8a\x2a\xc5\x6f\x30\x23\x58\x7b"
+			  "\xfb\x36\x03\x11\xb4\xd9\xf2\xfe",
+		.alen	= 32,
+		.input	= "\x48\x58\xd6\xf3\xad\x63\x58\xbf"
+			  "\xae\xc7\x5e\xae\x83\x8f\x7b\xe4"
+			  "\x78\x5c\x4c\x67\x71\x89\x94\xbf"
+			  "\x47\xf1\x63\x7e\x1c\x59\xbd\xc5"
+			  "\x7f\x44\x0a\x0c\x01\x18\x07\x92"
+			  "\xe1\xd3\x51\xce\x32\x6d\x0c\x5b",
+		.ilen	= 48,
+		.result	= "\xc2\x54\xc8\xde\x78\x87\x77\x40"
+			  "\x49\x71\xe4\xb7\xe7\xcb\x76\x61"
+			  "\x0a\x41\xb9\xe9\xc0\x76\x54\xab"
+			  "\x04\x49\x3b\x19\x93\x57\x25\x5d",
+		.rlen	= 32,
+	},
+};
+
+/*
+ * ANSI X9.31 Continuous Pseudo-Random Number Generator (AES mode)
+ * test vectors, taken from Appendix B.2.9 and B.2.10:
+ *     http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf
+ * Only AES-128 is supported at this time.
+ */
+#define ANSI_CPRNG_AES_TEST_VECTORS	6
+
+static struct cprng_testvec ansi_cprng_aes_tv_template[] = {
+	{
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xf9",
+		.dtlen	= 16,
+		.v	= "\x80\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x59\x53\x1e\xd1\x3b\xb0\xc0\x55"
+			  "\x84\x79\x66\x85\xc1\x2f\x76\x41",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfa",
+		.dtlen	= 16,
+		.v	= "\xc0\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x7c\x22\x2c\xf4\xca\x8f\xa2\x4c"
+			  "\x1c\x9c\xb6\x41\xa9\xf3\x22\x0d",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfb",
+		.dtlen	= 16,
+		.v	= "\xe0\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x8a\xaa\x00\x39\x66\x67\x5b\xe5"
+			  "\x29\x14\x28\x81\xa9\x4d\x4e\xc7",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfc",
+		.dtlen	= 16,
+		.v	= "\xf0\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x88\xdd\xa4\x56\x30\x24\x23\xe5"
+			  "\xf6\x9d\xa5\x7e\x7b\x95\xc7\x3a",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfd",
+		.dtlen	= 16,
+		.v	= "\xf8\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x05\x25\x92\x46\x61\x79\xd2\xcb"
+			  "\x78\xc4\x0b\x14\x0a\x5a\x9a\xc8",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {	/* Monte Carlo Test */
+		.key	= "\x9f\x5b\x51\x20\x0b\xf3\x34\xb5"
+			  "\xd8\x2b\xe8\xc3\x72\x55\xc8\x48",
+		.klen	= 16,
+		.dt	= "\x63\x76\xbb\xe5\x29\x02\xba\x3b"
+			  "\x67\xc9\x25\xfa\x70\x1f\x11\xac",
+		.dtlen	= 16,
+		.v	= "\x57\x2c\x8e\x76\x87\x26\x47\x97"
+			  "\x7e\x74\xfb\xdd\xc4\x95\x01\xd1",
+		.vlen	= 16,
+		.result	= "\x48\xe9\xbd\x0d\x06\xee\x18\xfb"
+			  "\xe4\x57\x90\xd5\xc3\xfc\x9b\x73",
+		.rlen	= 16,
+		.loops	= 10000,
+	},
+};
+
 /* Cast5 test vectors from RFC 2144 */
 #define CAST5_ENC_TEST_VECTORS	3
 #define CAST5_DEC_TEST_VECTORS	3
diff --git a/crypto/zlib.c b/crypto/zlib.c
index 33609bab614..c3015733c99 100644
--- a/crypto/zlib.c
+++ b/crypto/zlib.c
@@ -165,15 +165,15 @@ static int zlib_compress_update(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 static int zlib_compress_final(struct crypto_pcomp *tfm,
@@ -195,15 +195,15 @@ static int zlib_compress_final(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 
@@ -280,15 +280,15 @@ static int zlib_decompress_update(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 static int zlib_decompress_final(struct crypto_pcomp *tfm,
@@ -328,15 +328,15 @@ static int zlib_decompress_final(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 1266ead6ace..9e7d4e56c85 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -107,3 +107,4 @@ obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_STAGING)		+= staging/
 obj-y				+= platform/
+obj-y				+= ieee802154/
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 07e20135f01..0bba148a2c6 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -139,7 +139,7 @@ acpi_status acpi_ev_initialize_op_regions(void);
 acpi_status
 acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			       u32 function,
-			       acpi_physical_address address,
+			       u32 region_offset,
 			       u32 bit_width, acpi_integer * value);
 
 acpi_status
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 16e5210ae93..3d87362d17e 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -362,9 +362,6 @@ extern u8 acpi_gbl_method_executing;
 extern u8 acpi_gbl_abort_method;
 extern u8 acpi_gbl_db_terminate_threads;
 
-ACPI_EXTERN int optind;
-ACPI_EXTERN char *optarg;
-
 ACPI_EXTERN u8 acpi_gbl_db_opt_tables;
 ACPI_EXTERN u8 acpi_gbl_db_opt_stats;
 ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 2ec394a328e..ee986edfa0d 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -205,6 +205,7 @@ struct acpi_namespace_node {
 #define ANOBJ_METHOD_LOCAL              0x08	/* Node is a method local */
 #define ANOBJ_SUBTREE_HAS_INI           0x10	/* Used to optimize device initialization */
 #define ANOBJ_EVALUATED                 0x20	/* Set on first evaluation of node */
+#define ANOBJ_ALLOCATED_BUFFER          0x40	/* Method AML buffer is dynamic (install_method) */
 
 #define ANOBJ_IS_EXTERNAL               0x08	/* i_aSL only: This object created via External() */
 #define ANOBJ_METHOD_NO_RETVAL          0x10	/* i_aSL only: Method has no return value */
@@ -788,11 +789,14 @@ struct acpi_bit_register_info {
 /* For control registers, both ignored and reserved bits must be preserved */
 
 /*
- * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
- * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
- * as a BIOS workaround on some machines.
+ * For PM1 control, the SCI enable bit (bit 0, SCI_EN) is defined by the
+ * ACPI specification to be a "preserved" bit - "OSPM always preserves this
+ * bit position", section 4.7.3.2.1. However, on some machines the OS must
+ * write a one to this bit after resume for the machine to work properly.
+ * To enable this, we no longer attempt to preserve this bit. No machines
+ * are known to fail if the bit is not preserved. (May 2009)
  */
-#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bits 9 */
+#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bit 9 */
 #define ACPI_PM1_CONTROL_RESERVED_BITS          0xC1F8	/* Bits 14-15, 3-8 */
 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
 	       (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 46cb5b46d28..94cdc2b8cb9 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -99,10 +99,19 @@ acpi_ns_walk_namespace(acpi_object_type type,
 		       acpi_walk_callback user_function,
 		       void *context, void **return_value);
 
-struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node
-						  *parent, struct acpi_namespace_node
+struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
+						  *parent,
+						  struct acpi_namespace_node
 						  *child);
 
+struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type,
+							struct
+							acpi_namespace_node
+							*parent,
+							struct
+							acpi_namespace_node
+							*child);
+
 /*
  * nsparse - table parsing
  */
diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h
index ff851c5df69..067f967eb38 100644
--- a/drivers/acpi/acpica/amlcode.h
+++ b/drivers/acpi/acpica/amlcode.h
@@ -483,7 +483,7 @@ typedef enum {
 
 #define AML_METHOD_ARG_COUNT        0x07
 #define AML_METHOD_SERIALIZED       0x08
-#define AML_METHOD_SYNCH_LEVEL      0xF0
+#define AML_METHOD_SYNC_LEVEL       0xF0
 
 /* METHOD_FLAGS_ARG_COUNT is not used internally, define additional flags */
 
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index dab3f48f0b4..02e6caad4a7 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -734,7 +734,8 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 			/* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */
 
-			obj_desc->reference.value = opcode - AML_LOCAL_OP;
+			obj_desc->reference.value =
+			    ((u32)opcode) - AML_LOCAL_OP;
 			obj_desc->reference.class = ACPI_REFCLASS_LOCAL;
 
 #ifndef ACPI_NO_METHOD_EXECUTION
@@ -754,7 +755,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 			/* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */
 
-			obj_desc->reference.value = opcode - AML_ARG_OP;
+			obj_desc->reference.value = ((u32)opcode) - AML_ARG_OP;
 			obj_desc->reference.class = ACPI_REFCLASS_ARG;
 
 #ifndef ACPI_NO_METHOD_EXECUTION
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index b4c87b5053e..584d766e6f1 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -1386,14 +1386,19 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
 
 	case AML_BREAK_POINT_OP:
 
-		/* Call up to the OS service layer to handle this */
-
-		status =
-		    acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
-				   "Executed AML Breakpoint opcode");
+		/*
+		 * Set the single-step flag. This will cause the debugger (if present)
+		 * to break to the console within the AML debugger at the start of the
+		 * next AML instruction.
+		 */
+		ACPI_DEBUGGER_EXEC(acpi_gbl_cm_single_step = TRUE);
+		ACPI_DEBUGGER_EXEC(acpi_os_printf
+				   ("**break** Executed AML BreakPoint opcode\n"));
 
-		/* If and when it returns, all done. */
+		/* Call to the OSL in case OS wants a piece of the action */
 
+		status = acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
+					"Executed AML Breakpoint opcode");
 		break;
 
 	case AML_BREAK_OP:
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index 40f92bf7dce..e46c821cf57 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -102,7 +102,7 @@ acpi_ds_result_pop(union acpi_operand_object **object,
 	/* Return object of the top element and clean that top element result stack */
 
 	walk_state->result_count--;
-	index = walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
+	index = (u32)walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
 
 	*object = state->results.obj_desc[index];
 	if (!*object) {
@@ -186,7 +186,7 @@ acpi_ds_result_push(union acpi_operand_object * object,
 
 	/* Assign the address of object to the top free element of result stack */
 
-	index = walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
+	index = (u32)walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
 	state->results.obj_desc[index] = object;
 	walk_state->result_count++;
 
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 538d6326455..98c7f9c6265 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -275,7 +275,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
  *
  * PARAMETERS:  region_obj          - Internal region object
  *              Function            - Read or Write operation
- *              Address             - Where in the space to read or write
+ *              region_offset       - Where in the region to read or write
  *              bit_width           - Field width in bits (8, 16, 32, or 64)
  *              Value               - Pointer to in or out value, must be
  *                                    full 64-bit acpi_integer
@@ -290,7 +290,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
 acpi_status
 acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			       u32 function,
-			       acpi_physical_address address,
+			       u32 region_offset,
 			       u32 bit_width, acpi_integer * value)
 {
 	acpi_status status;
@@ -396,7 +396,8 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 			  "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
 			  &region_obj->region.handler->address_space, handler,
-			  ACPI_FORMAT_NATIVE_UINT(address),
+			  ACPI_FORMAT_NATIVE_UINT(region_obj->region.address +
+						  region_offset),
 			  acpi_ut_get_region_name(region_obj->region.
 						  space_id)));
 
@@ -412,8 +413,9 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 
 	/* Call the handler */
 
-	status = handler(function, address, bit_width, value,
-			 handler_desc->address_space.context,
+	status = handler(function,
+			 (region_obj->region.address + region_offset),
+			 bit_width, value, handler_desc->address_space.context,
 			 region_obj2->extra.region_context);
 
 	if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d0a080747ec..4721f58fe42 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -51,7 +51,7 @@
 ACPI_MODULE_NAME("evxfevnt")
 
 /* Local prototypes */
-acpi_status
+static acpi_status
 acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 		       struct acpi_gpe_block_info *gpe_block, void *context);
 
@@ -785,7 +785,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
  *              block device. NULL if the GPE is one of the FADT-defined GPEs.
  *
  ******************************************************************************/
-acpi_status
+static acpi_status
 acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 		       struct acpi_gpe_block_info *gpe_block, void *context)
 {
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index 3deb20a126b..277fd609611 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -47,6 +47,7 @@
 #include "acnamesp.h"
 #include "actables.h"
 #include "acdispat.h"
+#include "acevents.h"
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exconfig")
@@ -57,6 +58,10 @@ acpi_ex_add_table(u32 table_index,
 		  struct acpi_namespace_node *parent_node,
 		  union acpi_operand_object **ddb_handle);
 
+static acpi_status
+acpi_ex_region_read(union acpi_operand_object *obj_desc,
+		    u32 length, u8 *buffer);
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_add_table
@@ -91,6 +96,7 @@ acpi_ex_add_table(u32 table_index,
 
 	/* Init the table handle */
 
+	obj_desc->common.flags |= AOPOBJ_DATA_VALID;
 	obj_desc->reference.class = ACPI_REFCLASS_TABLE;
 	*ddb_handle = obj_desc;
 
@@ -229,6 +235,8 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
 				       walk_state);
 		if (ACPI_FAILURE(status)) {
 			(void)acpi_ex_unload_table(ddb_handle);
+
+			acpi_ut_remove_reference(ddb_handle);
 			return_ACPI_STATUS(status);
 		}
 	}
@@ -254,6 +262,47 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_ex_region_read
+ *
+ * PARAMETERS:  obj_desc        - Region descriptor
+ *              Length          - Number of bytes to read
+ *              Buffer          - Pointer to where to put the data
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read data from an operation region. The read starts from the
+ *              beginning of the region.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer)
+{
+	acpi_status status;
+	acpi_integer value;
+	u32 region_offset = 0;
+	u32 i;
+
+	/* Bytewise reads */
+
+	for (i = 0; i < length; i++) {
+		status = acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
+							region_offset, 8,
+							&value);
+		if (ACPI_FAILURE(status)) {
+			return status;
+		}
+
+		*buffer = (u8)value;
+		buffer++;
+		region_offset++;
+	}
+
+	return AE_OK;
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_ex_load_op
  *
  * PARAMETERS:  obj_desc        - Region or Buffer/Field where the table will be
@@ -314,18 +363,23 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 			}
 		}
 
-		/*
-		 * Map the table header and get the actual table length. The region
-		 * length is not guaranteed to be the same as the table length.
-		 */
-		table = acpi_os_map_memory(obj_desc->region.address,
-					   sizeof(struct acpi_table_header));
+		/* Get the table header first so we can get the table length */
+
+		table = ACPI_ALLOCATE(sizeof(struct acpi_table_header));
 		if (!table) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
+		status =
+		    acpi_ex_region_read(obj_desc,
+					sizeof(struct acpi_table_header),
+					ACPI_CAST_PTR(u8, table));
 		length = table->length;
-		acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
+		ACPI_FREE(table);
+
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
 
 		/* Must have at least an ACPI table header */
 
@@ -334,10 +388,19 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 		}
 
 		/*
-		 * The memory region is not guaranteed to remain stable and we must
-		 * copy the table to a local buffer. For example, the memory region
-		 * is corrupted after suspend on some machines. Dynamically loaded
-		 * tables are usually small, so this overhead is minimal.
+		 * The original implementation simply mapped the table, with no copy.
+		 * However, the memory region is not guaranteed to remain stable and
+		 * we must copy the table to a local buffer. For example, the memory
+		 * region is corrupted after suspend on some machines. Dynamically
+		 * loaded tables are usually small, so this overhead is minimal.
+		 *
+		 * The latest implementation (5/2009) does not use a mapping at all.
+		 * We use the low-level operation region interface to read the table
+		 * instead of the obvious optimization of using a direct mapping.
+		 * This maintains a consistent use of operation regions across the
+		 * entire subsystem. This is important if additional processing must
+		 * be performed in the (possibly user-installed) operation region
+		 * handler. For example, acpi_exec and ASLTS depend on this.
 		 */
 
 		/* Allocate a buffer for the table */
@@ -347,17 +410,16 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
-		/* Map the entire table and copy it */
+		/* Read the entire table */
 
-		table = acpi_os_map_memory(obj_desc->region.address, length);
-		if (!table) {
+		status = acpi_ex_region_read(obj_desc, length,
+					     ACPI_CAST_PTR(u8,
+							   table_desc.pointer));
+		if (ACPI_FAILURE(status)) {
 			ACPI_FREE(table_desc.pointer);
-			return_ACPI_STATUS(AE_NO_MEMORY);
+			return_ACPI_STATUS(status);
 		}
 
-		ACPI_MEMCPY(table_desc.pointer, table, length);
-		acpi_os_unmap_memory(table, length);
-
 		table_desc.address = obj_desc->region.address;
 		break;
 
@@ -454,6 +516,10 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(status);
 	}
 
+	/* Remove the reference by added by acpi_ex_store above */
+
+	acpi_ut_remove_reference(ddb_handle);
+
 	/* Invoke table handler if present */
 
 	if (acpi_gbl_table_handler) {
@@ -495,13 +561,18 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	/*
 	 * Validate the handle
-	 * Although the handle is partially validated in acpi_ex_reconfiguration(),
+	 * Although the handle is partially validated in acpi_ex_reconfiguration()
 	 * when it calls acpi_ex_resolve_operands(), the handle is more completely
 	 * validated here.
+	 *
+	 * Handle must be a valid operand object of type reference. Also, the
+	 * ddb_handle must still be marked valid (table has not been previously
+	 * unloaded)
 	 */
 	if ((!ddb_handle) ||
 	    (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) ||
-	    (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE)) {
+	    (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE) ||
+	    (!(ddb_handle->common.flags & AOPOBJ_DATA_VALID))) {
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -509,6 +580,12 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	table_index = table_desc->reference.value;
 
+	/* Ensure the table is still loaded */
+
+	if (!acpi_tb_is_table_loaded(table_index)) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
 	/* Invoke table handler if present */
 
 	if (acpi_gbl_table_handler) {
@@ -530,8 +607,10 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 	(void)acpi_tb_release_owner_id(table_index);
 	acpi_tb_set_table_loaded_flag(table_index, FALSE);
 
-	/* Table unloaded, remove a reference to the ddb_handle object */
-
-	acpi_ut_remove_reference(ddb_handle);
+	/*
+	 * Invalidate the handle. We do this because the handle may be stored
+	 * in a named object and may not be actually deleted until much later.
+	 */
+	ddb_handle->common.flags &= ~AOPOBJ_DATA_VALID;
 	return_ACPI_STATUS(AE_OK);
 }
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index a57ad2564ab..02b25d233d9 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -502,7 +502,7 @@ acpi_ex_create_method(u8 * aml_start,
 		 * ACPI 2.0: sync_level = sync_level in method declaration
 		 */
 		obj_desc->method.sync_level = (u8)
-		    ((method_flags & AML_METHOD_SYNCH_LEVEL) >> 4);
+		    ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4);
 	}
 
 	/* Attach the new object to the method Node */
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index 89d141fdae0..ec524614e70 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -120,9 +120,11 @@ static struct acpi_exdump_info acpi_ex_dump_event[2] = {
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(event.os_semaphore), "OsSemaphore"}
 };
 
-static struct acpi_exdump_info acpi_ex_dump_method[8] = {
+static struct acpi_exdump_info acpi_ex_dump_method[9] = {
 	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_method), NULL},
-	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count), "ParamCount"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.method_flags), "Method Flags"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count),
+	 "Parameter Count"},
 	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.sync_level), "Sync Level"},
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.mutex), "Mutex"},
 	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.owner_id), "Owner Id"},
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index 99cee61e655..d4075b82102 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -222,7 +222,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 {
 	acpi_status status;
 	union acpi_operand_object *rgn_desc;
-	acpi_physical_address address;
+	u32 region_offset;
 
 	ACPI_FUNCTION_TRACE(ex_access_region);
 
@@ -243,7 +243,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 	 * 3) The current offset into the field
 	 */
 	rgn_desc = obj_desc->common_field.region_obj;
-	address = rgn_desc->region.address +
+	region_offset =
 	    obj_desc->common_field.base_byte_offset + field_datum_byte_offset;
 
 	if ((function & ACPI_IO_MASK) == ACPI_READ) {
@@ -260,16 +260,18 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 			      obj_desc->common_field.access_byte_width,
 			      obj_desc->common_field.base_byte_offset,
 			      field_datum_byte_offset, ACPI_CAST_PTR(void,
-								     address)));
+								     (rgn_desc->
+								      region.
+								      address +
+								      region_offset))));
 
 	/* Invoke the appropriate address_space/op_region handler */
 
-	status = acpi_ev_address_space_dispatch(rgn_desc, function,
-						address,
-						ACPI_MUL_8(obj_desc->
-							   common_field.
-							   access_byte_width),
-						value);
+	status =
+	    acpi_ev_address_space_dispatch(rgn_desc, function, region_offset,
+					   ACPI_MUL_8(obj_desc->common_field.
+						      access_byte_width),
+					   value);
 
 	if (ACPI_FAILURE(status)) {
 		if (status == AE_NOT_IMPLEMENTED) {
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index d301c1f363e..2f0114202b0 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -83,6 +83,15 @@ void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc)
 
 	if (obj_desc->mutex.prev) {
 		(obj_desc->mutex.prev)->mutex.next = obj_desc->mutex.next;
+
+		/*
+		 * Migrate the previous sync level associated with this mutex to the
+		 * previous mutex on the list so that it may be preserved. This handles
+		 * the case where several mutexes have been acquired at the same level,
+		 * but are not released in opposite order.
+		 */
+		(obj_desc->mutex.prev)->mutex.original_sync_level =
+		    obj_desc->mutex.original_sync_level;
 	} else {
 		thread->acquired_mutex_list = obj_desc->mutex.next;
 	}
@@ -349,6 +358,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 		      struct acpi_walk_state *walk_state)
 {
 	acpi_status status = AE_OK;
+	u8 previous_sync_level;
 
 	ACPI_FUNCTION_TRACE(ex_release_mutex);
 
@@ -373,11 +383,12 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	     walk_state->thread->thread_id)
 	    && (obj_desc != acpi_gbl_global_lock_mutex)) {
 		ACPI_ERROR((AE_INFO,
-			    "Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
-			    (unsigned long)walk_state->thread->thread_id,
+			    "Thread %p cannot release Mutex [%4.4s] acquired by thread %p",
+			    ACPI_CAST_PTR(void, walk_state->thread->thread_id),
 			    acpi_ut_get_node_name(obj_desc->mutex.node),
-			    (unsigned long)obj_desc->mutex.owner_thread->
-			    thread_id));
+			    ACPI_CAST_PTR(void,
+					  obj_desc->mutex.owner_thread->
+					  thread_id)));
 		return_ACPI_STATUS(AE_AML_NOT_OWNER);
 	}
 
@@ -391,10 +402,14 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	}
 
 	/*
-	 * The sync level of the mutex must be less than or equal to the current
-	 * sync level
+	 * The sync level of the mutex must be equal to the current sync level. In
+	 * other words, the current level means that at least one mutex at that
+	 * level is currently being held. Attempting to release a mutex of a
+	 * different level can only mean that the mutex ordering rule is being
+	 * violated. This behavior is clarified in ACPI 4.0 specification.
 	 */
-	if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
+	if (obj_desc->mutex.sync_level !=
+	    walk_state->thread->current_sync_level) {
 		ACPI_ERROR((AE_INFO,
 			    "Cannot release Mutex [%4.4s], SyncLevel mismatch: mutex %d current %d",
 			    acpi_ut_get_node_name(obj_desc->mutex.node),
@@ -403,14 +418,24 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
 	}
 
+	/*
+	 * Get the previous sync_level from the head of the acquired mutex list.
+	 * This handles the case where several mutexes at the same level have been
+	 * acquired, but are not released in reverse order.
+	 */
+	previous_sync_level =
+	    walk_state->thread->acquired_mutex_list->mutex.original_sync_level;
+
 	status = acpi_ex_release_mutex_object(obj_desc);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
 	if (obj_desc->mutex.acquisition_depth == 0) {
 
-		/* Restore the original sync_level */
+		/* Restore the previous sync_level */
 
-		walk_state->thread->current_sync_level =
-		    obj_desc->mutex.original_sync_level;
+		walk_state->thread->current_sync_level = previous_sync_level;
 	}
 	return_ACPI_STATUS(status);
 }
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 90d606196c9..6efd07a4f77 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -193,10 +193,12 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
 
 		case ACPI_REFCLASS_TABLE:
 
+			/* Case for ddb_handle */
+
 			ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 					      "Table Index 0x%X\n",
 					      source_desc->reference.value));
-			break;
+			return;
 
 		default:
 			break;
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 7b2fb602b5c..23d5505cb1f 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -81,9 +81,9 @@ acpi_status acpi_hw_clear_acpi_status(void)
 
 	ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %0llX\n",
+	ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %8.8X%8.8X\n",
 			  ACPI_BITMASK_ALL_FIXED_STATUS,
-			  acpi_gbl_xpm1a_status.address));
+			  ACPI_FORMAT_UINT64(acpi_gbl_xpm1a_status.address)));
 
 	lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
 
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index aceb9311196..efc971ab7d6 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -334,9 +334,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node)
 
 		/* Get the next node in this scope (NULL if none) */
 
-		child_node =
-		    acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
-					  child_node);
+		child_node = acpi_ns_get_next_node(parent_node, child_node);
 		if (child_node) {
 
 			/* Found a child node - detach any attached object */
@@ -345,8 +343,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node)
 
 			/* Check if this node has any children */
 
-			if (acpi_ns_get_next_node
-			    (ACPI_TYPE_ANY, child_node, NULL)) {
+			if (child_node->child) {
 				/*
 				 * There is at least one child of this node,
 				 * visit the node
@@ -432,9 +429,7 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 		 * Get the next child of this parent node. When child_node is NULL,
 		 * the first child of the parent is returned
 		 */
-		child_node =
-		    acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
-					  child_node);
+		child_node = acpi_ns_get_next_node(parent_node, child_node);
 
 		if (deletion_node) {
 			acpi_ns_delete_children(deletion_node);
@@ -452,8 +447,7 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 
 			/* Check if this node has any children */
 
-			if (acpi_ns_get_next_node
-			    (ACPI_TYPE_ANY, child_node, NULL)) {
+			if (child_node->child) {
 				/*
 				 * There is at least one child of this node,
 				 * visit the node
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index ae3dc10a7e8..af8e6bcee07 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -149,7 +149,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	name_buffer = ACPI_ALLOCATE_ZEROED(size);
 	if (!name_buffer) {
-		ACPI_ERROR((AE_INFO, "Allocation failure"));
+		ACPI_ERROR((AE_INFO, "Could not allocate %u bytes", (u32)size));
 		return_PTR(NULL);
 	}
 
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index 3eb20bfda9d..60f3af08d28 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -213,6 +213,15 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node)
 		return_VOID;
 	}
 
+	if (node->flags & ANOBJ_ALLOCATED_BUFFER) {
+
+		/* Free the dynamic aml buffer */
+
+		if (obj_desc->common.type == ACPI_TYPE_METHOD) {
+			ACPI_FREE(obj_desc->method.aml_start);
+		}
+	}
+
 	/* Clear the entry in all cases */
 
 	node->object = NULL;
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index d9e8cbc6e67..7f8e066b12a 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -144,7 +144,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
 
 	pathname = acpi_ns_get_external_pathname(node);
 	if (!pathname) {
-		pathname = ACPI_CAST_PTR(char, predefined->info.name);
+		return AE_OK;	/* Could not get pathname, ignore */
 	}
 
 	/*
@@ -230,10 +230,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
 	}
 
       exit:
-	if (pathname != predefined->info.name) {
-		ACPI_FREE(pathname);
-	}
-
+	ACPI_FREE(pathname);
 	return (status);
 }
 
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index f9b4f51bf8f..7e865639a92 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -45,6 +45,10 @@
 #include "accommon.h"
 #include "acnamesp.h"
 
+#ifdef ACPI_ASL_COMPILER
+#include "amlcode.h"
+#endif
+
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nssearch")
 
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 83e3aa6d4b9..35539df5c75 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -52,8 +52,7 @@ ACPI_MODULE_NAME("nswalk")
  *
  * FUNCTION:    acpi_ns_get_next_node
  *
- * PARAMETERS:  Type                - Type of node to be searched for
- *              parent_node         - Parent node whose children we are
+ * PARAMETERS:  parent_node         - Parent node whose children we are
  *                                    getting
  *              child_node          - Previous child that was found.
  *                                    The NEXT child will be returned
@@ -66,27 +65,68 @@ ACPI_MODULE_NAME("nswalk")
  *              within Scope is returned.
  *
  ******************************************************************************/
-struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node
-						  *parent_node, struct acpi_namespace_node
+struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
+						  *parent_node,
+						  struct acpi_namespace_node
 						  *child_node)
 {
-	struct acpi_namespace_node *next_node = NULL;
-
 	ACPI_FUNCTION_ENTRY();
 
 	if (!child_node) {
 
 		/* It's really the parent's _scope_ that we want */
 
-		next_node = parent_node->child;
+		return parent_node->child;
 	}
 
-	else {
-		/* Start search at the NEXT node */
-
-		next_node = acpi_ns_get_next_valid_node(child_node);
+	/*
+	 * Get the next node.
+	 *
+	 * If we are at the end of this peer list, return NULL
+	 */
+	if (child_node->flags & ANOBJ_END_OF_PEER_LIST) {
+		return NULL;
 	}
 
+	/* Otherwise just return the next peer */
+
+	return child_node->peer;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_get_next_node_typed
+ *
+ * PARAMETERS:  Type                - Type of node to be searched for
+ *              parent_node         - Parent node whose children we are
+ *                                    getting
+ *              child_node          - Previous child that was found.
+ *                                    The NEXT child will be returned
+ *
+ * RETURN:      struct acpi_namespace_node - Pointer to the NEXT child or NULL if
+ *                                    none is found.
+ *
+ * DESCRIPTION: Return the next peer node within the namespace.  If Handle
+ *              is valid, Scope is ignored.  Otherwise, the first node
+ *              within Scope is returned.
+ *
+ ******************************************************************************/
+
+struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type,
+							struct
+							acpi_namespace_node
+							*parent_node,
+							struct
+							acpi_namespace_node
+							*child_node)
+{
+	struct acpi_namespace_node *next_node = NULL;
+
+	ACPI_FUNCTION_ENTRY();
+
+	next_node = acpi_ns_get_next_node(parent_node, child_node);
+
+
 	/* If any type is OK, we are done */
 
 	if (type == ACPI_TYPE_ANY) {
@@ -186,9 +226,7 @@ acpi_ns_walk_namespace(acpi_object_type type,
 		/* Get the next node in this scope.  Null if not found */
 
 		status = AE_OK;
-		child_node =
-		    acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
-					  child_node);
+		child_node = acpi_ns_get_next_node(parent_node, child_node);
 		if (child_node) {
 
 			/* Found next child, get the type if we are not searching for ANY */
@@ -269,8 +307,7 @@ acpi_ns_walk_namespace(acpi_object_type type,
 			 * function has specified that the maximum depth has been reached.
 			 */
 			if ((level < max_depth) && (status != AE_CTRL_DEPTH)) {
-				if (acpi_ns_get_next_node
-				    (ACPI_TYPE_ANY, child_node, NULL)) {
+				if (child_node->child) {
 
 					/* There is at least one child of this node, visit it */
 
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index 9589fea2499..f23593d6add 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -45,6 +45,8 @@
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
+#include "acparser.h"
+#include "amlcode.h"
 
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nsxfname")
@@ -358,3 +360,151 @@ acpi_get_object_info(acpi_handle handle, struct acpi_buffer * buffer)
 }
 
 ACPI_EXPORT_SYMBOL(acpi_get_object_info)
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_install_method
+ *
+ * PARAMETERS:  Buffer         - An ACPI table containing one control method
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Install a control method into the namespace. If the method
+ *              name already exists in the namespace, it is overwritten. The
+ *              input buffer must contain a valid DSDT or SSDT containing a
+ *              single control method.
+ *
+ ******************************************************************************/
+acpi_status acpi_install_method(u8 *buffer)
+{
+	struct acpi_table_header *table =
+	    ACPI_CAST_PTR(struct acpi_table_header, buffer);
+	u8 *aml_buffer;
+	u8 *aml_start;
+	char *path;
+	struct acpi_namespace_node *node;
+	union acpi_operand_object *method_obj;
+	struct acpi_parse_state parser_state;
+	u32 aml_length;
+	u16 opcode;
+	u8 method_flags;
+	acpi_status status;
+
+	/* Parameter validation */
+
+	if (!buffer) {
+		return AE_BAD_PARAMETER;
+	}
+
+	/* Table must be a DSDT or SSDT */
+
+	if (!ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) &&
+	    !ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
+		return AE_BAD_HEADER;
+	}
+
+	/* First AML opcode in the table must be a control method */
+
+	parser_state.aml = buffer + sizeof(struct acpi_table_header);
+	opcode = acpi_ps_peek_opcode(&parser_state);
+	if (opcode != AML_METHOD_OP) {
+		return AE_BAD_PARAMETER;
+	}
+
+	/* Extract method information from the raw AML */
+
+	parser_state.aml += acpi_ps_get_opcode_size(opcode);
+	parser_state.pkg_end = acpi_ps_get_next_package_end(&parser_state);
+	path = acpi_ps_get_next_namestring(&parser_state);
+	method_flags = *parser_state.aml++;
+	aml_start = parser_state.aml;
+	aml_length = ACPI_PTR_DIFF(parser_state.pkg_end, aml_start);
+
+	/*
+	 * Allocate resources up-front. We don't want to have to delete a new
+	 * node from the namespace if we cannot allocate memory.
+	 */
+	aml_buffer = ACPI_ALLOCATE(aml_length);
+	if (!aml_buffer) {
+		return AE_NO_MEMORY;
+	}
+
+	method_obj = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
+	if (!method_obj) {
+		ACPI_FREE(aml_buffer);
+		return AE_NO_MEMORY;
+	}
+
+	/* Lock namespace for acpi_ns_lookup, we may be creating a new node */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		goto error_exit;
+	}
+
+	/* The lookup either returns an existing node or creates a new one */
+
+	status =
+	    acpi_ns_lookup(NULL, path, ACPI_TYPE_METHOD, ACPI_IMODE_LOAD_PASS1,
+			   ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND,
+			   NULL, &node);
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
+	if (ACPI_FAILURE(status)) {	/* ns_lookup */
+		if (status != AE_ALREADY_EXISTS) {
+			goto error_exit;
+		}
+
+		/* Node existed previously, make sure it is a method node */
+
+		if (node->type != ACPI_TYPE_METHOD) {
+			status = AE_TYPE;
+			goto error_exit;
+		}
+	}
+
+	/* Copy the method AML to the local buffer */
+
+	ACPI_MEMCPY(aml_buffer, aml_start, aml_length);
+
+	/* Initialize the method object with the new method's information */
+
+	method_obj->method.aml_start = aml_buffer;
+	method_obj->method.aml_length = aml_length;
+
+	method_obj->method.param_count = (u8)
+	    (method_flags & AML_METHOD_ARG_COUNT);
+
+	method_obj->method.method_flags = (u8)
+	    (method_flags & ~AML_METHOD_ARG_COUNT);
+
+	if (method_flags & AML_METHOD_SERIALIZED) {
+		method_obj->method.sync_level = (u8)
+		    ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4);
+	}
+
+	/*
+	 * Now that it is complete, we can attach the new method object to
+	 * the method Node (detaches/deletes any existing object)
+	 */
+	status = acpi_ns_attach_object(node, method_obj, ACPI_TYPE_METHOD);
+
+	/*
+	 * Flag indicates AML buffer is dynamic, must be deleted later.
+	 * Must be set only after attach above.
+	 */
+	node->flags |= ANOBJ_ALLOCATED_BUFFER;
+
+	/* Remove local reference to the method object */
+
+	acpi_ut_remove_reference(method_obj);
+	return status;
+
+error_exit:
+
+	ACPI_FREE(aml_buffer);
+	ACPI_FREE(method_obj);
+	return status;
+}
+ACPI_EXPORT_SYMBOL(acpi_install_method)
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 1c7efc15225..4071bad4458 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -162,6 +162,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_type)
 acpi_status acpi_get_parent(acpi_handle handle, acpi_handle * ret_handle)
 {
 	struct acpi_namespace_node *node;
+	struct acpi_namespace_node *parent_node;
 	acpi_status status;
 
 	if (!ret_handle) {
@@ -189,12 +190,12 @@ acpi_status acpi_get_parent(acpi_handle handle, acpi_handle * ret_handle)
 
 	/* Get the parent entry */
 
-	*ret_handle =
-	    acpi_ns_convert_entry_to_handle(acpi_ns_get_parent_node(node));
+	parent_node = acpi_ns_get_parent_node(node);
+	*ret_handle = acpi_ns_convert_entry_to_handle(parent_node);
 
 	/* Return exception if parent is null */
 
-	if (!acpi_ns_get_parent_node(node)) {
+	if (!parent_node) {
 		status = AE_NULL_ENTRY;
 	}
 
@@ -268,7 +269,7 @@ acpi_get_next_object(acpi_object_type type,
 
 	/* Internal function does the real work */
 
-	node = acpi_ns_get_next_node(type, parent_node, child_node);
+	node = acpi_ns_get_next_node_typed(type, parent_node, child_node);
 	if (!node) {
 		status = AE_NOT_FOUND;
 		goto unlock_and_exit;
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index 88b5a2c4814..3c4dcc3d106 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -547,7 +547,7 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 
 		if (!package_element ||
 		    (package_element->common.type != ACPI_TYPE_PACKAGE)) {
-			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
 		/*
@@ -593,9 +593,6 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 			} else {
 				temp_size_needed +=
 				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
-				if (!temp_size_needed) {
-					return_ACPI_STATUS(AE_BAD_PARAMETER);
-				}
 			}
 		} else {
 			/*
diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c
index 69a2aa5b5d8..395212bcd19 100644
--- a/drivers/acpi/acpica/rsxface.c
+++ b/drivers/acpi/acpica/rsxface.c
@@ -338,13 +338,17 @@ acpi_resource_to_address64(struct acpi_resource *resource,
 	switch (resource->type) {
 	case ACPI_RESOURCE_TYPE_ADDRESS16:
 
-		address16 = (struct acpi_resource_address16 *)&resource->data;
+		address16 =
+		    ACPI_CAST_PTR(struct acpi_resource_address16,
+				  &resource->data);
 		ACPI_COPY_ADDRESS(out, address16);
 		break;
 
 	case ACPI_RESOURCE_TYPE_ADDRESS32:
 
-		address32 = (struct acpi_resource_address32 *)&resource->data;
+		address32 =
+		    ACPI_CAST_PTR(struct acpi_resource_address32,
+				  &resource->data);
 		ACPI_COPY_ADDRESS(out, address32);
 		break;
 
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 71e655d14cb..82b02dcb942 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -284,9 +284,9 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
 	if (length > sizeof(struct acpi_table_fadt)) {
 		ACPI_WARNING((AE_INFO,
 			      "FADT (revision %u) is longer than ACPI 2.0 version, "
-			      "truncating length 0x%X to 0x%zX",
-			      table->revision, (unsigned)length,
-			      sizeof(struct acpi_table_fadt)));
+			      "truncating length 0x%X to 0x%X",
+			      table->revision, length,
+			      (u32)sizeof(struct acpi_table_fadt)));
 	}
 
 	/* Clear the entire local FADT */
@@ -441,7 +441,7 @@ static void acpi_tb_convert_fadt(void)
 								   &acpi_gbl_FADT,
 								   fadt_info_table
 								   [i].length),
-						     address32);
+						     (u64) address32);
 		}
 	}
 }
@@ -469,7 +469,6 @@ static void acpi_tb_convert_fadt(void)
 static void acpi_tb_validate_fadt(void)
 {
 	char *name;
-	u32 *address32;
 	struct acpi_generic_address *address64;
 	u8 length;
 	u32 i;
@@ -505,15 +504,12 @@ static void acpi_tb_validate_fadt(void)
 
 	for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
 		/*
-		 * Generate pointers to the 32-bit and 64-bit addresses, get the
-		 * register length (width), and the register name
+		 * Generate pointer to the 64-bit address, get the register
+		 * length (width) and the register name
 		 */
 		address64 = ACPI_ADD_PTR(struct acpi_generic_address,
 					 &acpi_gbl_FADT,
 					 fadt_info_table[i].address64);
-		address32 =
-		    ACPI_ADD_PTR(u32, &acpi_gbl_FADT,
-				 fadt_info_table[i].address32);
 		length =
 		    *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
 				  fadt_info_table[i].length);
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index f865d5a096d..63e82329a9e 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -472,7 +472,7 @@ acpi_status acpi_tb_delete_namespace_by_owner(u32 table_index)
 	 * lock may block, and also since the execution of a namespace walk
 	 * must be allowed to use the interpreter.
 	 */
-	acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+	(void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
 	status = acpi_ut_acquire_write_lock(&acpi_gbl_namespace_rw_lock);
 
 	acpi_ns_delete_namespace_by_owner(owner_id);
diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c
index 919624f123d..0f0c64bf8ac 100644
--- a/drivers/acpi/acpica/utcopy.c
+++ b/drivers/acpi/acpica/utcopy.c
@@ -676,6 +676,7 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 {
 	u16 reference_count;
 	union acpi_operand_object *next_object;
+	acpi_status status;
 
 	/* Save fields from destination that we don't want to overwrite */
 
@@ -768,6 +769,28 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 		}
 		break;
 
+		/*
+		 * For Mutex and Event objects, we cannot simply copy the underlying
+		 * OS object. We must create a new one.
+		 */
+	case ACPI_TYPE_MUTEX:
+
+		status = acpi_os_create_mutex(&dest_desc->mutex.os_mutex);
+		if (ACPI_FAILURE(status)) {
+			return status;
+		}
+		break;
+
+	case ACPI_TYPE_EVENT:
+
+		status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0,
+						  &dest_desc->event.
+						  os_semaphore);
+		if (ACPI_FAILURE(status)) {
+			return status;
+		}
+		break;
+
 	default:
 		/* Nothing to do for other simple objects */
 		break;
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index 38821f53042..527d729f681 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -179,9 +179,9 @@ acpi_debug_print(u32 requested_debug_level,
 	if (thread_id != acpi_gbl_prev_thread_id) {
 		if (ACPI_LV_THREADS & acpi_dbg_level) {
 			acpi_os_printf
-			    ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
-			     (unsigned long)acpi_gbl_prev_thread_id,
-			     (unsigned long)thread_id);
+			    ("\n**** Context Switch from TID %p to TID %p ****\n\n",
+			     ACPI_CAST_PTR(void, acpi_gbl_prev_thread_id),
+			     ACPI_CAST_PTR(void, thread_id));
 		}
 
 		acpi_gbl_prev_thread_id = thread_id;
@@ -194,7 +194,7 @@ acpi_debug_print(u32 requested_debug_level,
 	acpi_os_printf("%8s-%04ld ", module_name, line_number);
 
 	if (ACPI_LV_THREADS & acpi_dbg_level) {
-		acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
+		acpi_os_printf("[%p] ", ACPI_CAST_PTR(void, thread_id));
 	}
 
 	acpi_os_printf("[%02ld] %-22.22s: ",
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index a5ee23bc4f5..bc171031508 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -75,6 +75,7 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 	union acpi_operand_object *handler_desc;
 	union acpi_operand_object *second_desc;
 	union acpi_operand_object *next_desc;
+	union acpi_operand_object **last_obj_ptr;
 
 	ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
 
@@ -223,6 +224,26 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 			 */
 			handler_desc = object->region.handler;
 			if (handler_desc) {
+				next_desc =
+				    handler_desc->address_space.region_list;
+				last_obj_ptr =
+				    &handler_desc->address_space.region_list;
+
+				/* Remove the region object from the handler's list */
+
+				while (next_desc) {
+					if (next_desc == object) {
+						*last_obj_ptr =
+						    next_desc->region.next;
+						break;
+					}
+
+					/* Walk the linked list of handler */
+
+					last_obj_ptr = &next_desc->region.next;
+					next_desc = next_desc->region.next;
+				}
+
 				if (handler_desc->address_space.handler_flags &
 				    ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
 
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 1c9e250caef..fbe782348b0 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -1033,11 +1033,12 @@ acpi_error(const char *module_name, u32 line_number, const char *format, ...)
 {
 	va_list args;
 
-	acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
+	acpi_os_printf("ACPI Error: ");
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+	acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
+		       line_number);
 	va_end(args);
 }
 
@@ -1047,12 +1048,12 @@ acpi_exception(const char *module_name,
 {
 	va_list args;
 
-	acpi_os_printf("ACPI Exception (%s-%04d): %s, ", module_name,
-		       line_number, acpi_format_exception(status));
+	acpi_os_printf("ACPI Exception: %s, ", acpi_format_exception(status));
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+	acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
+		       line_number);
 	va_end(args);
 }
 
@@ -1061,11 +1062,12 @@ acpi_warning(const char *module_name, u32 line_number, const char *format, ...)
 {
 	va_list args;
 
-	acpi_os_printf("ACPI Warning (%s-%04d): ", module_name, line_number);
+	acpi_os_printf("ACPI Warning: ");
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+	acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
+		       line_number);
 	va_end(args);
 }
 
@@ -1074,10 +1076,6 @@ acpi_info(const char *module_name, u32 line_number, const char *format, ...)
 {
 	va_list args;
 
-	/*
-	 * Removed module_name, line_number, and acpica version, not needed
-	 * for info output
-	 */
 	acpi_os_printf("ACPI: ");
 
 	va_start(args, format);
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 26c93a748e6..80bb6515411 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -230,17 +230,18 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
 			if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
 				if (i == mutex_id) {
 					ACPI_ERROR((AE_INFO,
-						    "Mutex [%s] already acquired by this thread [%X]",
+						    "Mutex [%s] already acquired by this thread [%p]",
 						    acpi_ut_get_mutex_name
 						    (mutex_id),
-						    this_thread_id));
+						    ACPI_CAST_PTR(void,
+								  this_thread_id)));
 
 					return (AE_ALREADY_ACQUIRED);
 				}
 
 				ACPI_ERROR((AE_INFO,
-					    "Invalid acquire order: Thread %X owns [%s], wants [%s]",
-					    this_thread_id,
+					    "Invalid acquire order: Thread %p owns [%s], wants [%s]",
+					    ACPI_CAST_PTR(void, this_thread_id),
 					    acpi_ut_get_mutex_name(i),
 					    acpi_ut_get_mutex_name(mutex_id)));
 
@@ -251,24 +252,24 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
 #endif
 
 	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %lX attempting to acquire Mutex [%s]\n",
-			  (unsigned long)this_thread_id,
+			  "Thread %p attempting to acquire Mutex [%s]\n",
+			  ACPI_CAST_PTR(void, this_thread_id),
 			  acpi_ut_get_mutex_name(mutex_id)));
 
 	status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
 				       ACPI_WAIT_FOREVER);
 	if (ACPI_SUCCESS(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-				  "Thread %lX acquired Mutex [%s]\n",
-				  (unsigned long)this_thread_id,
+				  "Thread %p acquired Mutex [%s]\n",
+				  ACPI_CAST_PTR(void, this_thread_id),
 				  acpi_ut_get_mutex_name(mutex_id)));
 
 		acpi_gbl_mutex_info[mutex_id].use_count++;
 		acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
 	} else {
 		ACPI_EXCEPTION((AE_INFO, status,
-				"Thread %lX could not acquire Mutex [%X]",
-				(unsigned long)this_thread_id, mutex_id));
+				"Thread %p could not acquire Mutex [%X]",
+				ACPI_CAST_PTR(void, this_thread_id), mutex_id));
 	}
 
 	return (status);
@@ -293,9 +294,8 @@ acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
 	ACPI_FUNCTION_NAME(ut_release_mutex);
 
 	this_thread_id = acpi_os_get_thread_id();
-	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %lX releasing Mutex [%s]\n",
-			  (unsigned long)this_thread_id,
+	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %p releasing Mutex [%s]\n",
+			  ACPI_CAST_PTR(void, this_thread_id),
 			  acpi_ut_get_mutex_name(mutex_id)));
 
 	if (mutex_id > ACPI_MAX_MUTEX) {
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9120717c070..2aa1908e5ce 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -535,6 +535,15 @@ config PATA_OPTIDMA
 
 	  If unsure, say N.
 
+config PATA_PALMLD
+	tristate "Palm LifeDrive PATA support"
+	depends on MACH_PALMLD
+	help
+	  This option enables support for Palm LifeDrive's internal ATA
+	  port via the new ATA layer.
+
+	  If unsure, say N.
+
 config PATA_PCMCIA
 	tristate "PCMCIA PATA support"
 	depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7f1ecf99528..1558059874f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6273d98d00e..ac176da1f94 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 /**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
  * @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
  *
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
  *
  * LOCKING:
  * EH context.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 94919ad03df..fa22f94ca41 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2864,7 +2864,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 /**
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
  *	ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 00000000000..11fb4ccc74b
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
+	.cable_detect		= ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *mem;
+	int ret;
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* remap drive's physical memory address */
+	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+	if (!mem)
+		return -ENOMEM;
+
+	/* request and activate power GPIO, IRQ GPIO */
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* reset the drive */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+	msleep(30);
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+	msleep(30);
+
+	/* setup the ata port */
+	ap = host->ports[0];
+	ap->ops	= &palmld_port_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+	/* memory mapping voodoo */
+	ap->ioaddr.cmd_addr = mem + 0x10;
+	ap->ioaddr.altstatus_addr = mem + 0xe;
+	ap->ioaddr.ctl_addr = mem + 0xe;
+
+	/* start the port */
+	ata_sff_std_ports(&ap->ioaddr);
+
+	/* activate host */
+	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+					&palmld_sht);
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+	return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+	struct ata_host *host = platform_get_drvdata(dev);
+
+	ata_host_detach(host);
+
+	/* power down the HDD */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+	return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.probe		= palmld_pata_probe,
+	.remove		= __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+	return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+	platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index c6599618523..4b04a15146d 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -279,7 +279,7 @@ static struct device *next_device(struct klist_iter *i)
  *
  * NOTE: The device that returns a non-zero value is not retained
  * in any way, nor is its refcount incremented. If the caller needs
- * to retain this data, it should do, and increment the reference
+ * to retain this data, it should do so, and increment the reference
  * count in the supplied callback.
  */
 int bus_for_each_dev(struct bus_type *bus, struct device *start,
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index d3a59c688fe..8a267c42762 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/mutex.h>
 #include <linux/kthread.h>
-
+#include <linux/highmem.h>
 #include <linux/firmware.h>
 #include "base.h"
 
@@ -45,7 +45,10 @@ struct firmware_priv {
 	struct bin_attribute attr_data;
 	struct firmware *fw;
 	unsigned long status;
-	int alloc_size;
+	struct page **pages;
+	int nr_pages;
+	int page_array_size;
+	const char *vdata;
 	struct timer_list timeout;
 };
 
@@ -122,6 +125,10 @@ static ssize_t firmware_loading_show(struct device *dev,
 	return sprintf(buf, "%d\n", loading);
 }
 
+/* Some architectures don't have PAGE_KERNEL_RO */
+#ifndef PAGE_KERNEL_RO
+#define PAGE_KERNEL_RO PAGE_KERNEL
+#endif
 /**
  * firmware_loading_store - set value in the 'loading' control file
  * @dev: device pointer
@@ -141,6 +148,7 @@ static ssize_t firmware_loading_store(struct device *dev,
 {
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
 	int loading = simple_strtol(buf, NULL, 10);
+	int i;
 
 	switch (loading) {
 	case 1:
@@ -151,13 +159,30 @@ static ssize_t firmware_loading_store(struct device *dev,
 		}
 		vfree(fw_priv->fw->data);
 		fw_priv->fw->data = NULL;
+		for (i = 0; i < fw_priv->nr_pages; i++)
+			__free_page(fw_priv->pages[i]);
+		kfree(fw_priv->pages);
+		fw_priv->pages = NULL;
+		fw_priv->page_array_size = 0;
+		fw_priv->nr_pages = 0;
 		fw_priv->fw->size = 0;
-		fw_priv->alloc_size = 0;
 		set_bit(FW_STATUS_LOADING, &fw_priv->status);
 		mutex_unlock(&fw_lock);
 		break;
 	case 0:
 		if (test_bit(FW_STATUS_LOADING, &fw_priv->status)) {
+			vfree(fw_priv->fw->data);
+			fw_priv->fw->data = vmap(fw_priv->pages,
+						 fw_priv->nr_pages,
+						 0, PAGE_KERNEL_RO);
+			if (!fw_priv->fw->data) {
+				dev_err(dev, "%s: vmap() failed\n", __func__);
+				goto err;
+			}
+			/* Pages will be freed by vfree() */
+			fw_priv->pages = NULL;
+			fw_priv->page_array_size = 0;
+			fw_priv->nr_pages = 0;
 			complete(&fw_priv->completion);
 			clear_bit(FW_STATUS_LOADING, &fw_priv->status);
 			break;
@@ -167,6 +192,7 @@ static ssize_t firmware_loading_store(struct device *dev,
 		dev_err(dev, "%s: unexpected value (%d)\n", __func__, loading);
 		/* fallthrough */
 	case -1:
+	err:
 		fw_load_abort(fw_priv);
 		break;
 	}
@@ -191,8 +217,28 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		ret_count = -ENODEV;
 		goto out;
 	}
-	ret_count = memory_read_from_buffer(buffer, count, &offset,
-						fw->data, fw->size);
+	if (offset > fw->size)
+		return 0;
+	if (count > fw->size - offset)
+		count = fw->size - offset;
+
+	ret_count = count;
+
+	while (count) {
+		void *page_data;
+		int page_nr = offset >> PAGE_SHIFT;
+		int page_ofs = offset & (PAGE_SIZE-1);
+		int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count);
+
+		page_data = kmap(fw_priv->pages[page_nr]);
+
+		memcpy(buffer, page_data + page_ofs, page_cnt);
+
+		kunmap(fw_priv->pages[page_nr]);
+		buffer += page_cnt;
+		offset += page_cnt;
+		count -= page_cnt;
+	}
 out:
 	mutex_unlock(&fw_lock);
 	return ret_count;
@@ -201,27 +247,39 @@ out:
 static int
 fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
 {
-	u8 *new_data;
-	int new_size = fw_priv->alloc_size;
+	int pages_needed = ALIGN(min_size, PAGE_SIZE) >> PAGE_SHIFT;
+
+	/* If the array of pages is too small, grow it... */
+	if (fw_priv->page_array_size < pages_needed) {
+		int new_array_size = max(pages_needed,
+					 fw_priv->page_array_size * 2);
+		struct page **new_pages;
+
+		new_pages = kmalloc(new_array_size * sizeof(void *),
+				    GFP_KERNEL);
+		if (!new_pages) {
+			fw_load_abort(fw_priv);
+			return -ENOMEM;
+		}
+		memcpy(new_pages, fw_priv->pages,
+		       fw_priv->page_array_size * sizeof(void *));
+		memset(&new_pages[fw_priv->page_array_size], 0, sizeof(void *) *
+		       (new_array_size - fw_priv->page_array_size));
+		kfree(fw_priv->pages);
+		fw_priv->pages = new_pages;
+		fw_priv->page_array_size = new_array_size;
+	}
 
-	if (min_size <= fw_priv->alloc_size)
-		return 0;
+	while (fw_priv->nr_pages < pages_needed) {
+		fw_priv->pages[fw_priv->nr_pages] =
+			alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
 
-	new_size = ALIGN(min_size, PAGE_SIZE);
-	new_data = vmalloc(new_size);
-	if (!new_data) {
-		printk(KERN_ERR "%s: unable to alloc buffer\n", __func__);
-		/* Make sure that we don't keep incomplete data */
-		fw_load_abort(fw_priv);
-		return -ENOMEM;
-	}
-	fw_priv->alloc_size = new_size;
-	if (fw_priv->fw->data) {
-		memcpy(new_data, fw_priv->fw->data, fw_priv->fw->size);
-		vfree(fw_priv->fw->data);
+		if (!fw_priv->pages[fw_priv->nr_pages]) {
+			fw_load_abort(fw_priv);
+			return -ENOMEM;
+		}
+		fw_priv->nr_pages++;
 	}
-	fw_priv->fw->data = new_data;
-	BUG_ON(min_size > fw_priv->alloc_size);
 	return 0;
 }
 
@@ -258,10 +316,25 @@ firmware_data_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 	if (retval)
 		goto out;
 
-	memcpy((u8 *)fw->data + offset, buffer, count);
-
-	fw->size = max_t(size_t, offset + count, fw->size);
 	retval = count;
+
+	while (count) {
+		void *page_data;
+		int page_nr = offset >> PAGE_SHIFT;
+		int page_ofs = offset & (PAGE_SIZE - 1);
+		int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count);
+
+		page_data = kmap(fw_priv->pages[page_nr]);
+
+		memcpy(page_data + page_ofs, buffer, page_cnt);
+
+		kunmap(fw_priv->pages[page_nr]);
+		buffer += page_cnt;
+		offset += page_cnt;
+		count -= page_cnt;
+	}
+
+	fw->size = max_t(size_t, offset, fw->size);
 out:
 	mutex_unlock(&fw_lock);
 	return retval;
@@ -277,7 +350,11 @@ static struct bin_attribute firmware_attr_data_tmpl = {
 static void fw_dev_release(struct device *dev)
 {
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	int i;
 
+	for (i = 0; i < fw_priv->nr_pages; i++)
+		__free_page(fw_priv->pages[i]);
+	kfree(fw_priv->pages);
 	kfree(fw_priv);
 	kfree(dev);
 
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 8b4708e0624..ead3f64c41d 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -469,22 +469,6 @@ static void platform_drv_shutdown(struct device *_dev)
 	drv->shutdown(dev);
 }
 
-static int platform_drv_suspend(struct device *_dev, pm_message_t state)
-{
-	struct platform_driver *drv = to_platform_driver(_dev->driver);
-	struct platform_device *dev = to_platform_device(_dev);
-
-	return drv->suspend(dev, state);
-}
-
-static int platform_drv_resume(struct device *_dev)
-{
-	struct platform_driver *drv = to_platform_driver(_dev->driver);
-	struct platform_device *dev = to_platform_device(_dev);
-
-	return drv->resume(dev);
-}
-
 /**
  * platform_driver_register
  * @drv: platform driver structure
@@ -498,10 +482,10 @@ int platform_driver_register(struct platform_driver *drv)
 		drv->driver.remove = platform_drv_remove;
 	if (drv->shutdown)
 		drv->driver.shutdown = platform_drv_shutdown;
-	if (drv->suspend)
-		drv->driver.suspend = platform_drv_suspend;
-	if (drv->resume)
-		drv->driver.resume = platform_drv_resume;
+	if (drv->suspend || drv->resume)
+		pr_warning("Platform driver '%s' needs updating - please use "
+			"dev_pm_ops\n", drv->driver.name);
+
 	return driver_register(&drv->driver);
 }
 EXPORT_SYMBOL_GPL(platform_driver_register);
@@ -633,10 +617,12 @@ static int platform_match(struct device *dev, struct device_driver *drv)
 
 static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
+	struct platform_driver *pdrv = to_platform_driver(dev->driver);
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret = 0;
 
-	if (dev->driver && dev->driver->suspend)
-		ret = dev->driver->suspend(dev, mesg);
+	if (dev->driver && pdrv->suspend)
+		ret = pdrv->suspend(pdev, mesg);
 
 	return ret;
 }
@@ -667,10 +653,12 @@ static int platform_legacy_resume_early(struct device *dev)
 
 static int platform_legacy_resume(struct device *dev)
 {
+	struct platform_driver *pdrv = to_platform_driver(dev->driver);
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret = 0;
 
-	if (dev->driver && dev->driver->resume)
-		ret = dev->driver->resume(dev);
+	if (dev->driver && pdrv->resume)
+		ret = pdrv->resume(pdev);
 
 	return ret;
 }
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 3e4bc699bc0..fae72545898 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -315,13 +315,13 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
 /*------------------------- Resume routines -------------------------*/
 
 /**
- *	resume_device_noirq - Power on one device (early resume).
+ *	device_resume_noirq - Power on one device (early resume).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	Must be called with interrupts disabled.
  */
-static int resume_device_noirq(struct device *dev, pm_message_t state)
+static int device_resume_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -334,9 +334,6 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "EARLY ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->resume_early) {
-		pm_dev_dbg(dev, state, "legacy EARLY ");
-		error = dev->bus->resume_early(dev);
 	}
  End:
 	TRACE_RESUME(error);
@@ -344,16 +341,16 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 }
 
 /**
- *	dpm_power_up - Power on all regular (non-sysdev) devices.
+ *	dpm_resume_noirq - Power on all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Execute the appropriate "noirq resume" callback for all devices marked
- *	as DPM_OFF_IRQ.
+ *	Call the "noirq" resume handlers for all devices marked as
+ *	DPM_OFF_IRQ and enable device drivers to receive interrupts.
  *
  *	Must be called under dpm_list_mtx.  Device drivers should not receive
  *	interrupts while it's being executed.
  */
-static void dpm_power_up(pm_message_t state)
+void dpm_resume_noirq(pm_message_t state)
 {
 	struct device *dev;
 
@@ -363,33 +360,21 @@ static void dpm_power_up(pm_message_t state)
 			int error;
 
 			dev->power.status = DPM_OFF;
-			error = resume_device_noirq(dev, state);
+			error = device_resume_noirq(dev, state);
 			if (error)
 				pm_dev_err(dev, state, " early", error);
 		}
 	mutex_unlock(&dpm_list_mtx);
-}
-
-/**
- *	device_power_up - Turn on all devices that need special attention.
- *	@state: PM transition of the system being carried out.
- *
- *	Call the "early" resume handlers and enable device drivers to receive
- *	interrupts.
- */
-void device_power_up(pm_message_t state)
-{
-	dpm_power_up(state);
 	resume_device_irqs();
 }
-EXPORT_SYMBOL_GPL(device_power_up);
+EXPORT_SYMBOL_GPL(dpm_resume_noirq);
 
 /**
- *	resume_device - Restore state for one device.
+ *	device_resume - Restore state for one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int resume_device(struct device *dev, pm_message_t state)
+static int device_resume(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -414,9 +399,6 @@ static int resume_device(struct device *dev, pm_message_t state)
 		if (dev->type->pm) {
 			pm_dev_dbg(dev, state, "type ");
 			error = pm_op(dev, dev->type->pm, state);
-		} else if (dev->type->resume) {
-			pm_dev_dbg(dev, state, "legacy type ");
-			error = dev->type->resume(dev);
 		}
 		if (error)
 			goto End;
@@ -462,7 +444,7 @@ static void dpm_resume(pm_message_t state)
 			dev->power.status = DPM_RESUMING;
 			mutex_unlock(&dpm_list_mtx);
 
-			error = resume_device(dev, state);
+			error = device_resume(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 			if (error)
@@ -480,11 +462,11 @@ static void dpm_resume(pm_message_t state)
 }
 
 /**
- *	complete_device - Complete a PM transition for given device
+ *	device_complete - Complete a PM transition for given device
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static void complete_device(struct device *dev, pm_message_t state)
+static void device_complete(struct device *dev, pm_message_t state)
 {
 	down(&dev->sem);
 
@@ -527,7 +509,7 @@ static void dpm_complete(pm_message_t state)
 			dev->power.status = DPM_ON;
 			mutex_unlock(&dpm_list_mtx);
 
-			complete_device(dev, state);
+			device_complete(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 		}
@@ -540,19 +522,19 @@ static void dpm_complete(pm_message_t state)
 }
 
 /**
- *	device_resume - Restore state of each device in system.
+ *	dpm_resume_end - Restore state of each device in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Resume all the devices, unlock them all, and allow new
  *	devices to be registered once again.
  */
-void device_resume(pm_message_t state)
+void dpm_resume_end(pm_message_t state)
 {
 	might_sleep();
 	dpm_resume(state);
 	dpm_complete(state);
 }
-EXPORT_SYMBOL_GPL(device_resume);
+EXPORT_SYMBOL_GPL(dpm_resume_end);
 
 
 /*------------------------- Suspend routines -------------------------*/
@@ -577,13 +559,13 @@ static pm_message_t resume_event(pm_message_t sleep_state)
 }
 
 /**
- *	suspend_device_noirq - Shut down one device (late suspend).
+ *	device_suspend_noirq - Shut down one device (late suspend).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	This is called with interrupts off and only a single CPU running.
  */
-static int suspend_device_noirq(struct device *dev, pm_message_t state)
+static int device_suspend_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -593,24 +575,20 @@ static int suspend_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "LATE ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->suspend_late) {
-		pm_dev_dbg(dev, state, "legacy LATE ");
-		error = dev->bus->suspend_late(dev, state);
-		suspend_report_result(dev->bus->suspend_late, error);
 	}
 	return error;
 }
 
 /**
- *	device_power_down - Shut down special devices.
+ *	dpm_suspend_noirq - Power down all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Prevent device drivers from receiving interrupts and call the "late"
+ *	Prevent device drivers from receiving interrupts and call the "noirq"
  *	suspend handlers.
  *
  *	Must be called under dpm_list_mtx.
  */
-int device_power_down(pm_message_t state)
+int dpm_suspend_noirq(pm_message_t state)
 {
 	struct device *dev;
 	int error = 0;
@@ -618,7 +596,7 @@ int device_power_down(pm_message_t state)
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
 	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
-		error = suspend_device_noirq(dev, state);
+		error = device_suspend_noirq(dev, state);
 		if (error) {
 			pm_dev_err(dev, state, " late", error);
 			break;
@@ -627,17 +605,17 @@ int device_power_down(pm_message_t state)
 	}
 	mutex_unlock(&dpm_list_mtx);
 	if (error)
-		device_power_up(resume_event(state));
+		dpm_resume_noirq(resume_event(state));
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(dpm_suspend_noirq);
 
 /**
- *	suspend_device - Save state of one device.
+ *	device_suspend - Save state of one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int suspend_device(struct device *dev, pm_message_t state)
+static int device_suspend(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -660,10 +638,6 @@ static int suspend_device(struct device *dev, pm_message_t state)
 		if (dev->type->pm) {
 			pm_dev_dbg(dev, state, "type ");
 			error = pm_op(dev, dev->type->pm, state);
-		} else if (dev->type->suspend) {
-			pm_dev_dbg(dev, state, "legacy type ");
-			error = dev->type->suspend(dev, state);
-			suspend_report_result(dev->type->suspend, error);
 		}
 		if (error)
 			goto End;
@@ -704,7 +678,7 @@ static int dpm_suspend(pm_message_t state)
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
 
-		error = suspend_device(dev, state);
+		error = device_suspend(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -723,11 +697,11 @@ static int dpm_suspend(pm_message_t state)
 }
 
 /**
- *	prepare_device - Execute the ->prepare() callback(s) for given device.
+ *	device_prepare - Execute the ->prepare() callback(s) for given device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int prepare_device(struct device *dev, pm_message_t state)
+static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -781,7 +755,7 @@ static int dpm_prepare(pm_message_t state)
 		dev->power.status = DPM_PREPARING;
 		mutex_unlock(&dpm_list_mtx);
 
-		error = prepare_device(dev, state);
+		error = device_prepare(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -807,12 +781,12 @@ static int dpm_prepare(pm_message_t state)
 }
 
 /**
- *	device_suspend - Save state and stop all devices in system.
+ *	dpm_suspend_start - Save state and stop all devices in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Prepare and suspend all devices.
  */
-int device_suspend(pm_message_t state)
+int dpm_suspend_start(pm_message_t state)
 {
 	int error;
 
@@ -822,7 +796,7 @@ int device_suspend(pm_message_t state)
 		error = dpm_suspend(state);
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_suspend);
+EXPORT_SYMBOL_GPL(dpm_suspend_start);
 
 void __suspend_report_result(const char *function, void *fn, int ret)
 {
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 3236b434b96..9742a78c9fe 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -343,11 +343,15 @@ static void __sysdev_resume(struct sys_device *dev)
 	/* First, call the class-specific one */
 	if (cls->resume)
 		cls->resume(dev);
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled after %pF\n", cls->resume);
 
 	/* Call auxillary drivers next. */
 	list_for_each_entry(drv, &cls->drivers, entry) {
 		if (drv->resume)
 			drv->resume(dev);
+		WARN_ONCE(!irqs_disabled(),
+			"Interrupts enabled after %pF\n", drv->resume);
 	}
 }
 
@@ -377,6 +381,9 @@ int sysdev_suspend(pm_message_t state)
 	if (ret)
 		return ret;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while suspending system devices\n");
+
 	pr_debug("Suspending System Devices\n");
 
 	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
@@ -393,6 +400,9 @@ int sysdev_suspend(pm_message_t state)
 					if (ret)
 						goto aux_driver;
 				}
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					drv->suspend);
 			}
 
 			/* Now call the generic one */
@@ -400,6 +410,9 @@ int sysdev_suspend(pm_message_t state)
 				ret = cls->suspend(sysdev, state);
 				if (ret)
 					goto cls_driver;
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					cls->suspend);
 			}
 		}
 	}
@@ -452,6 +465,9 @@ int sysdev_resume(void)
 {
 	struct sysdev_class *cls;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while resuming system devices\n");
+
 	pr_debug("Resuming System Devices\n");
 
 	list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index f42fa50d355..bb72ada9f07 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -112,7 +112,7 @@ config GDROM
 	  with up to 1 GB of data. This drive will also read standard CD ROM
 	  disks. Select this option to access any disks in your GD ROM drive.
 	  Most users will want to say "Y" here.
-	  You can also build this as a module which will be called gdrom.ko
+	  You can also build this as a module which will be called gdrom.
 
 source "drivers/block/paride/Kconfig"
 
@@ -438,7 +438,7 @@ source "drivers/s390/block/Kconfig"
 
 config XILINX_SYSACE
 	tristate "Xilinx SystemACE support"
-	depends on 4xx
+	depends on 4xx || MICROBLAZE
 	help
 	  Include support for the Xilinx SystemACE CompactFlash interface
 
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 31693bc2444..965ece2c7e4 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -34,13 +34,6 @@ new_skb(ulong len)
 		skb_reset_mac_header(skb);
 		skb_reset_network_header(skb);
 		skb->protocol = __constant_htons(ETH_P_AOE);
-		skb->priority = 0;
-		skb->next = skb->prev = NULL;
-
-		/* tell the network layer not to perform IP checksums
-		 * or to get the NIC to do it
-		 */
-		skb->ip_summed = CHECKSUM_NONE;
 	}
 	return skb;
 }
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b22cec97ea1..c7a527c08a0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -38,7 +38,6 @@
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
 #include <linux/compat.h>
-#include <linux/blktrace_api.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index 60de5a01e71..f703f547824 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -22,13 +22,12 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/mg_disk.h>
 
 #define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
 
 /* name for block device */
 #define MG_DISK_NAME "mgd"
-/* name for platform device */
-#define MG_DEV_NAME "mg_disk"
 
 #define MG_DISK_MAJ 0
 #define MG_DISK_MAX_PART 16
@@ -103,33 +102,8 @@
 #define MG_TMAX_SWRST_TO_RDY	500
 #define MG_TMAX_RSTOUT		3000
 
-/* device attribution */
-/* use mflash as boot device */
-#define MG_BOOT_DEV		(1 << 0)
-/* use mflash as storage device */
-#define MG_STORAGE_DEV		(1 << 1)
-/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
-#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
-
 #define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
 
-/* names of GPIO resource */
-#define MG_RST_PIN	"mg_rst"
-/* except MG_BOOT_DEV, reset-out pin should be assigned */
-#define MG_RSTOUT_PIN	"mg_rstout"
-
-/* private driver data */
-struct mg_drv_data {
-	/* disk resource */
-	u32 use_polling;
-
-	/* device attribution */
-	u32 dev_attr;
-
-	/* internally used */
-	struct mg_host *host;
-};
-
 /* main structure for mflash driver */
 struct mg_host {
 	struct device *dev;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index aaeeb544228..34cbb7f3efa 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -120,7 +120,7 @@ static void ps3disk_scatter_gather(struct ps3_storage_device *dev,
 static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 				     struct request *req)
 {
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	int write = rq_data_dir(req), res;
 	const char *op = write ? "write" : "read";
 	u64 start_sector, sectors;
@@ -168,7 +168,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 static int ps3disk_submit_flush_request(struct ps3_storage_device *dev,
 					struct request *req)
 {
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	u64 res;
 
 	dev_dbg(&dev->sbd.core, "%s:%u: flush request\n", __func__, __LINE__);
@@ -213,7 +213,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev,
 static void ps3disk_request(struct request_queue *q)
 {
 	struct ps3_storage_device *dev = q->queuedata;
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 
 	if (priv->req) {
 		dev_dbg(&dev->sbd.core, "%s:%u busy\n", __func__, __LINE__);
@@ -245,7 +245,7 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
-	priv = dev->sbd.core.driver_data;
+	priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	req = priv->req;
 	if (!req) {
 		dev_dbg(&dev->sbd.core,
@@ -364,7 +364,7 @@ static void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs,
 
 static int ps3disk_identify(struct ps3_storage_device *dev)
 {
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	struct lv1_ata_cmnd_block ata_cmnd;
 	u16 *id = dev->bounce_buf;
 	u64 res;
@@ -445,7 +445,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
 		goto fail;
 	}
 
-	dev->sbd.core.driver_data = priv;
+	ps3_system_bus_set_drvdata(_dev, priv);
 	spin_lock_init(&priv->lock);
 
 	dev->bounce_size = BOUNCE_SIZE;
@@ -523,7 +523,7 @@ fail_free_bounce:
 	kfree(dev->bounce_buf);
 fail_free_priv:
 	kfree(priv);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(_dev, NULL);
 fail:
 	mutex_lock(&ps3disk_mask_mutex);
 	__clear_bit(devidx, &ps3disk_mask);
@@ -534,7 +534,7 @@ fail:
 static int ps3disk_remove(struct ps3_system_bus_device *_dev)
 {
 	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 
 	mutex_lock(&ps3disk_mask_mutex);
 	__clear_bit(MINOR(disk_devt(priv->gendisk)) / PS3DISK_MINORS,
@@ -548,7 +548,7 @@ static int ps3disk_remove(struct ps3_system_bus_device *_dev)
 	ps3stor_teardown(dev);
 	kfree(dev->bounce_buf);
 	kfree(priv);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(_dev, NULL);
 	return 0;
 }
 
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index 8eddef373a9..095f97e6066 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -14,8 +14,10 @@
 #include <linux/seq_file.h>
 
 #include <asm/firmware.h>
+#include <asm/iommu.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
+#include <asm/ps3gpu.h>
 
 
 #define DEVICE_NAME		"ps3vram"
@@ -45,8 +47,6 @@
 #define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN	0x0000030c
 #define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY	0x00000104
 
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
-
 #define CACHE_PAGE_PRESENT 1
 #define CACHE_PAGE_DIRTY   2
 
@@ -72,8 +72,7 @@ struct ps3vram_priv {
 	u64 memory_handle;
 	u64 context_handle;
 	u32 *ctrl;
-	u32 *reports;
-	u8 __iomem *ddr_base;
+	void *reports;
 	u8 *xdr_buf;
 
 	u32 *fifo_base;
@@ -81,8 +80,8 @@ struct ps3vram_priv {
 
 	struct ps3vram_cache cache;
 
-	/* Used to serialize cache/DMA operations */
-	struct mutex lock;
+	spinlock_t lock;	/* protecting list of bios */
+	struct bio_list list;
 };
 
 
@@ -103,15 +102,15 @@ static char *size = "256M";
 module_param(size, charp, 0);
 MODULE_PARM_DESC(size, "memory size");
 
-static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
+static u32 *ps3vram_get_notifier(void *reports, int notifier)
 {
-	return (void *)reports + DMA_NOTIFIER_OFFSET_BASE +
+	return reports + DMA_NOTIFIER_OFFSET_BASE +
 	       DMA_NOTIFIER_SIZE * notifier;
 }
 
 static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
 	int i;
 
@@ -122,7 +121,7 @@ static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
 static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
 				 unsigned int timeout_ms)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
 	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
 
@@ -137,7 +136,7 @@ static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
 
 static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
 	priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
@@ -146,7 +145,7 @@ static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
 static int ps3vram_wait_ring(struct ps3_system_bus_device *dev,
 			     unsigned int timeout_ms)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
 
 	do {
@@ -175,7 +174,7 @@ static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan, u32 tag,
 
 static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	int status;
 
 	ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
@@ -183,20 +182,17 @@ static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
 	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
 
 	/* asking the HV for a blit will kick the FIFO */
-	status = lv1_gpu_context_attribute(priv->context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
-					   0, 0, 0);
+	status = lv1_gpu_fb_blit(priv->context_handle, 0, 0, 0, 0);
 	if (status)
-		dev_err(&dev->core,
-			"%s: lv1_gpu_context_attribute failed %d\n", __func__,
-			status);
+		dev_err(&dev->core, "%s: lv1_gpu_fb_blit failed %d\n",
+			__func__, status);
 
 	priv->fifo_ptr = priv->fifo_base;
 }
 
 static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	int status;
 
 	mutex_lock(&ps3_gpu_mutex);
@@ -205,13 +201,10 @@ static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
 			       (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
 
 	/* asking the HV for a blit will kick the FIFO */
-	status = lv1_gpu_context_attribute(priv->context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
-					   0, 0, 0);
+	status = lv1_gpu_fb_blit(priv->context_handle, 0, 0, 0, 0);
 	if (status)
-		dev_err(&dev->core,
-			"%s: lv1_gpu_context_attribute failed %d\n", __func__,
-			status);
+		dev_err(&dev->core, "%s: lv1_gpu_fb_blit failed %d\n",
+			__func__, status);
 
 	if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
 	    FIFO_SIZE - 1024) {
@@ -225,7 +218,7 @@ static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
 
 static void ps3vram_bind(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
 	ps3vram_out_ring(priv, 0x31337303);
@@ -248,7 +241,7 @@ static int ps3vram_upload(struct ps3_system_bus_device *dev,
 			  unsigned int src_offset, unsigned int dst_offset,
 			  int len, int count)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_begin_ring(priv, UPLOAD_SUBCH,
 			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
@@ -280,7 +273,7 @@ static int ps3vram_download(struct ps3_system_bus_device *dev,
 			    unsigned int src_offset, unsigned int dst_offset,
 			    int len, int count)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
 			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
@@ -310,7 +303,7 @@ static int ps3vram_download(struct ps3_system_bus_device *dev,
 
 static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 
 	if (!(cache->tags[entry].flags & CACHE_PAGE_DIRTY))
@@ -332,7 +325,7 @@ static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
 static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
 			       unsigned int address)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 
 	dev_dbg(&dev->core, "Fetching %d: 0x%08x\n", entry, address);
@@ -352,7 +345,7 @@ static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
 
 static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 	int i;
 
@@ -366,7 +359,7 @@ static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
 static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
 					loff_t address)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 	unsigned int base;
 	unsigned int offset;
@@ -400,7 +393,7 @@ static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
 
 static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	priv->cache.page_count = CACHE_PAGE_COUNT;
 	priv->cache.page_size = CACHE_PAGE_SIZE;
@@ -419,7 +412,7 @@ static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
 
 static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_cache_flush(dev);
 	kfree(priv->cache.tags);
@@ -428,7 +421,7 @@ static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
 static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 			size_t len, size_t *retlen, u_char *buf)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	unsigned int cached, count;
 
 	dev_dbg(&dev->core, "%s: from=0x%08x len=0x%zx\n", __func__,
@@ -449,8 +442,6 @@ static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 		offset = (unsigned int) (from & (priv->cache.page_size - 1));
 		avail  = priv->cache.page_size - offset;
 
-		mutex_lock(&priv->lock);
-
 		entry = ps3vram_cache_match(dev, from);
 		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
 
@@ -462,8 +453,6 @@ static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 			avail = count;
 		memcpy(buf, priv->xdr_buf + cached, avail);
 
-		mutex_unlock(&priv->lock);
-
 		buf += avail;
 		count -= avail;
 		from += avail;
@@ -476,7 +465,7 @@ static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
 			 size_t len, size_t *retlen, const u_char *buf)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	unsigned int cached, count;
 
 	if (to >= priv->size)
@@ -494,8 +483,6 @@ static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
 		offset = (unsigned int) (to & (priv->cache.page_size - 1));
 		avail  = priv->cache.page_size - offset;
 
-		mutex_lock(&priv->lock);
-
 		entry = ps3vram_cache_match(dev, to);
 		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
 
@@ -509,8 +496,6 @@ static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
 
 		priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
 
-		mutex_unlock(&priv->lock);
-
 		buf += avail;
 		count -= avail;
 		to += avail;
@@ -543,28 +528,26 @@ static const struct file_operations ps3vram_proc_fops = {
 
 static void __devinit ps3vram_proc_init(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct proc_dir_entry *pde;
 
-	pde = proc_create(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops);
-	if (!pde) {
+	pde = proc_create_data(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops,
+			       priv);
+	if (!pde)
 		dev_warn(&dev->core, "failed to create /proc entry\n");
-		return;
-	}
-	pde->data = priv;
 }
 
-static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+static struct bio *ps3vram_do_bio(struct ps3_system_bus_device *dev,
+				  struct bio *bio)
 {
-	struct ps3_system_bus_device *dev = q->queuedata;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	int write = bio_data_dir(bio) == WRITE;
 	const char *op = write ? "write" : "read";
 	loff_t offset = bio->bi_sector << 9;
 	int error = 0;
 	struct bio_vec *bvec;
 	unsigned int i;
-
-	dev_dbg(&dev->core, "%s\n", __func__);
+	struct bio *next;
 
 	bio_for_each_segment(bvec, bio, i) {
 		/* PS3 is ppc64, so we don't handle highmem */
@@ -585,6 +568,7 @@ static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
 
 		if (retlen != len) {
 			dev_err(&dev->core, "Short %s\n", op);
+			error = -EIO;
 			goto out;
 		}
 
@@ -594,7 +578,35 @@ static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
 	dev_dbg(&dev->core, "%s completed\n", op);
 
 out:
+	spin_lock_irq(&priv->lock);
+	bio_list_pop(&priv->list);
+	next = bio_list_peek(&priv->list);
+	spin_unlock_irq(&priv->lock);
+
 	bio_endio(bio, error);
+	return next;
+}
+
+static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+{
+	struct ps3_system_bus_device *dev = q->queuedata;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
+	int busy;
+
+	dev_dbg(&dev->core, "%s\n", __func__);
+
+	spin_lock_irq(&priv->lock);
+	busy = !bio_list_empty(&priv->list);
+	bio_list_add(&priv->list, bio);
+	spin_unlock_irq(&priv->lock);
+
+	if (busy)
+		return 0;
+
+	do {
+		bio = ps3vram_do_bio(dev, bio);
+	} while (bio);
+
 	return 0;
 }
 
@@ -604,8 +616,8 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 	int error, status;
 	struct request_queue *queue;
 	struct gendisk *gendisk;
-	u64 ddr_lpar, ctrl_lpar, info_lpar, reports_lpar, ddr_size,
-	    reports_size;
+	u64 ddr_size, ddr_lpar, ctrl_lpar, info_lpar, reports_lpar,
+	    reports_size, xdr_lpar;
 	char *rest;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -614,10 +626,9 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 		goto fail;
 	}
 
-	mutex_init(&priv->lock);
-	dev->core.driver_data = priv;
-
-	priv = dev->core.driver_data;
+	spin_lock_init(&priv->lock);
+	bio_list_init(&priv->list);
+	ps3_system_bus_set_drvdata(dev, priv);
 
 	/* Allocate XDR buffer (1MiB aligned) */
 	priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
@@ -636,7 +647,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 	if (ps3_open_hv_device(dev)) {
 		dev_err(&dev->core, "ps3_open_hv_device failed\n");
 		error = -EAGAIN;
-		goto out_close_gpu;
+		goto out_free_xdr_buf;
 	}
 
 	/* Request memory */
@@ -660,7 +671,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 		dev_err(&dev->core, "lv1_gpu_memory_allocate failed %d\n",
 			status);
 		error = -ENOMEM;
-		goto out_free_xdr_buf;
+		goto out_close_gpu;
 	}
 
 	/* Request context */
@@ -676,9 +687,11 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 	}
 
 	/* Map XDR buffer to RSX */
+	xdr_lpar = ps3_mm_phys_to_lpar(__pa(priv->xdr_buf));
 	status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
-				       ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
-				       XDR_BUF_SIZE, 0);
+				       xdr_lpar, XDR_BUF_SIZE,
+				       CBE_IOPTE_PP_W | CBE_IOPTE_PP_R |
+				       CBE_IOPTE_M);
 	if (status) {
 		dev_err(&dev->core, "lv1_gpu_context_iomap failed %d\n",
 			status);
@@ -686,19 +699,11 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 		goto out_free_context;
 	}
 
-	priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
-
-	if (!priv->ddr_base) {
-		dev_err(&dev->core, "ioremap DDR failed\n");
-		error = -ENOMEM;
-		goto out_free_context;
-	}
-
 	priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
 	if (!priv->ctrl) {
 		dev_err(&dev->core, "ioremap CTRL failed\n");
 		error = -ENOMEM;
-		goto out_unmap_vram;
+		goto out_unmap_context;
 	}
 
 	priv->reports = ioremap(reports_lpar, reports_size);
@@ -775,8 +780,9 @@ out_unmap_reports:
 	iounmap(priv->reports);
 out_unmap_ctrl:
 	iounmap(priv->ctrl);
-out_unmap_vram:
-	iounmap(priv->ddr_base);
+out_unmap_context:
+	lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF, xdr_lpar,
+			      XDR_BUF_SIZE, CBE_IOPTE_M);
 out_free_context:
 	lv1_gpu_context_free(priv->context_handle);
 out_free_memory:
@@ -787,14 +793,14 @@ out_free_xdr_buf:
 	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
 fail_free_priv:
 	kfree(priv);
-	dev->core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(dev, NULL);
 fail:
 	return error;
 }
 
 static int ps3vram_remove(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	del_gendisk(priv->gendisk);
 	put_disk(priv->gendisk);
@@ -803,13 +809,15 @@ static int ps3vram_remove(struct ps3_system_bus_device *dev)
 	ps3vram_cache_cleanup(dev);
 	iounmap(priv->reports);
 	iounmap(priv->ctrl);
-	iounmap(priv->ddr_base);
+	lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
+			      ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
+			      XDR_BUF_SIZE, CBE_IOPTE_M);
 	lv1_gpu_context_free(priv->context_handle);
 	lv1_gpu_memory_free(priv->memory_handle);
 	ps3_close_hv_device(dev);
 	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
 	kfree(priv);
-	dev->core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(dev, NULL);
 	return 0;
 }
 
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index c0facaa55cf..43db3ea15b5 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -254,7 +254,7 @@ static int index_to_minor(int index)
 	return index << PART_BITS;
 }
 
-static int virtblk_probe(struct virtio_device *vdev)
+static int __devinit virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
 	int err;
@@ -288,7 +288,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	sg_init_table(vblk->sg, vblk->sg_elems);
 
 	/* We expect one virtqueue, for output. */
-	vblk->vq = vdev->config->find_vq(vdev, 0, blk_done);
+	vblk->vq = virtio_find_single_vq(vdev, blk_done, "requests");
 	if (IS_ERR(vblk->vq)) {
 		err = PTR_ERR(vblk->vq);
 		goto out_free_vblk;
@@ -388,14 +388,14 @@ out_put_disk:
 out_mempool:
 	mempool_destroy(vblk->pool);
 out_free_vq:
-	vdev->config->del_vq(vblk->vq);
+	vdev->config->del_vqs(vdev);
 out_free_vblk:
 	kfree(vblk);
 out:
 	return err;
 }
 
-static void virtblk_remove(struct virtio_device *vdev)
+static void __devexit virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
 
@@ -409,7 +409,7 @@ static void virtblk_remove(struct virtio_device *vdev)
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);
-	vdev->config->del_vq(vblk->vq);
+	vdev->config->del_vqs(vdev);
 	kfree(vblk);
 }
 
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 901bdd95655..2cc7b3266ea 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -415,6 +415,8 @@ static int dtl1_hci_send_frame(struct sk_buff *skb)
 		hdev->stat.sco_tx++;
 		nsh.type = 0x83;
 		break;
+	default:
+		return -EILSEQ;
 	};
 
 	nsh.zero = 0;
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 0bbefba6469..1df9dda2e37 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -40,7 +40,7 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "1.2"
+#define VERSION "1.3"
 
 static int minor = MISC_DYNAMIC_MINOR;
 
@@ -51,14 +51,8 @@ struct vhci_data {
 
 	wait_queue_head_t read_wait;
 	struct sk_buff_head readq;
-
-	struct fasync_struct *fasync;
 };
 
-#define VHCI_FASYNC	0x0010
-
-static struct miscdevice vhci_miscdev;
-
 static int vhci_open_dev(struct hci_dev *hdev)
 {
 	set_bit(HCI_RUNNING, &hdev->flags);
@@ -105,9 +99,6 @@ static int vhci_send_frame(struct sk_buff *skb)
 	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 	skb_queue_tail(&data->readq, skb);
 
-	if (data->flags & VHCI_FASYNC)
-		kill_fasync(&data->fasync, SIGIO, POLL_IN);
-
 	wake_up_interruptible(&data->read_wait);
 
 	return 0;
@@ -179,41 +170,31 @@ static inline ssize_t vhci_put_user(struct vhci_data *data,
 static ssize_t vhci_read(struct file *file,
 				char __user *buf, size_t count, loff_t *pos)
 {
-	DECLARE_WAITQUEUE(wait, current);
 	struct vhci_data *data = file->private_data;
 	struct sk_buff *skb;
 	ssize_t ret = 0;
 
-	add_wait_queue(&data->read_wait, &wait);
 	while (count) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
 		skb = skb_dequeue(&data->readq);
-		if (!skb) {
-			if (file->f_flags & O_NONBLOCK) {
-				ret = -EAGAIN;
-				break;
-			}
-
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-
-			schedule();
-			continue;
+		if (skb) {
+			ret = vhci_put_user(data, skb, buf, count);
+			if (ret < 0)
+				skb_queue_head(&data->readq, skb);
+			else
+				kfree_skb(skb);
+			break;
 		}
 
-		if (access_ok(VERIFY_WRITE, buf, count))
-			ret = vhci_put_user(data, skb, buf, count);
-		else
-			ret = -EFAULT;
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			break;
+		}
 
-		kfree_skb(skb);
-		break;
+		ret = wait_event_interruptible(data->read_wait,
+					!skb_queue_empty(&data->readq));
+		if (ret < 0)
+			break;
 	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&data->read_wait, &wait);
 
 	return ret;
 }
@@ -223,9 +204,6 @@ static ssize_t vhci_write(struct file *file,
 {
 	struct vhci_data *data = file->private_data;
 
-	if (!access_ok(VERIFY_READ, buf, count))
-		return -EFAULT;
-
 	return vhci_get_user(data, buf, count);
 }
 
@@ -259,11 +237,9 @@ static int vhci_open(struct inode *inode, struct file *file)
 	skb_queue_head_init(&data->readq);
 	init_waitqueue_head(&data->read_wait);
 
-	lock_kernel();
 	hdev = hci_alloc_dev();
 	if (!hdev) {
 		kfree(data);
-		unlock_kernel();
 		return -ENOMEM;
 	}
 
@@ -284,12 +260,10 @@ static int vhci_open(struct inode *inode, struct file *file)
 		BT_ERR("Can't register HCI device");
 		kfree(data);
 		hci_free_dev(hdev);
-		unlock_kernel();
 		return -EBUSY;
 	}
 
 	file->private_data = data;
-	unlock_kernel();
 
 	return nonseekable_open(inode, file);
 }
@@ -310,48 +284,25 @@ static int vhci_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int vhci_fasync(int fd, struct file *file, int on)
-{
-	struct vhci_data *data = file->private_data;
-	int err = 0;
-
-	lock_kernel();
-	err = fasync_helper(fd, file, on, &data->fasync);
-	if (err < 0)
-		goto out;
-
-	if (on)
-		data->flags |= VHCI_FASYNC;
-	else
-		data->flags &= ~VHCI_FASYNC;
-
-out:
-	unlock_kernel();
-	return err;
-}
-
 static const struct file_operations vhci_fops = {
-	.owner		= THIS_MODULE,
 	.read		= vhci_read,
 	.write		= vhci_write,
 	.poll		= vhci_poll,
 	.ioctl		= vhci_ioctl,
 	.open		= vhci_open,
 	.release	= vhci_release,
-	.fasync		= vhci_fasync,
 };
 
 static struct miscdevice vhci_miscdev= {
-	.name		= "vhci",
-	.fops		= &vhci_fops,
+	.name	= "vhci",
+	.fops	= &vhci_fops,
+	.minor	= MISC_DYNAMIC_MINOR,
 };
 
 static int __init vhci_init(void)
 {
 	BT_INFO("Virtual HCI driver ver %s", VERSION);
 
-	vhci_miscdev.minor = minor;
-
 	if (misc_register(&vhci_miscdev) < 0) {
 		BT_ERR("Can't register misc device with minor %d", minor);
 		return -EIO;
@@ -369,9 +320,6 @@ static void __exit vhci_exit(void)
 module_init(vhci_init);
 module_exit(vhci_exit);
 
-module_param(minor, int, 0444);
-MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 02ecfd5fa61..30bae6de6a0 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -692,7 +692,7 @@ config HVCS
 	  this driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called hvcs.ko.  Additionally, this module
+	  module will be called hvcs.  Additionally, this module
 	  will depend on arch specific APIs exported from hvcserver.ko
 	  which will also be compiled when this driver is built as a
 	  module.
@@ -906,7 +906,7 @@ config DTLK
 
 config XILINX_HWICAP
 	tristate "Xilinx HWICAP Support"
-	depends on XILINX_VIRTEX
+	depends on XILINX_VIRTEX || MICROBLAZE
 	help
 	  This option enables support for Xilinx Internal Configuration
 	  Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 3686912427b..7a748fa0dfc 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -46,6 +46,10 @@
 #define PCI_DEVICE_ID_INTEL_G45_IG          0x2E22
 #define PCI_DEVICE_ID_INTEL_G41_HB          0x2E30
 #define PCI_DEVICE_ID_INTEL_G41_IG          0x2E32
+#define PCI_DEVICE_ID_INTEL_IGDNG_D_HB	    0x0040
+#define PCI_DEVICE_ID_INTEL_IGDNG_D_IG	    0x0042
+#define PCI_DEVICE_ID_INTEL_IGDNG_M_HB	    0x0044
+#define PCI_DEVICE_ID_INTEL_IGDNG_M_IG	    0x0046
 
 /* cover 915 and 945 variants */
 #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \
@@ -75,7 +79,9 @@
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
-		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB)
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB)
 
 extern int agp_memory_reserved;
 
@@ -1211,6 +1217,8 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 	case PCI_DEVICE_ID_INTEL_Q45_HB:
 	case PCI_DEVICE_ID_INTEL_G45_HB:
 	case PCI_DEVICE_ID_INTEL_G41_HB:
+	case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
+	case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
 		*gtt_offset = *gtt_size = MB(2);
 		break;
 	default:
@@ -2186,6 +2194,10 @@ static const struct intel_driver_description {
 	    "G45/G43", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0,
 	    "G41", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_IGDNG_D_HB, PCI_DEVICE_ID_INTEL_IGDNG_D_IG, 0,
+	    "IGDNG/D", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
+	    "IGDNG/M", NULL, &intel_i965_driver },
 	{ 0, 0, 0, NULL, NULL, NULL }
 };
 
@@ -2387,6 +2399,8 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_Q45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G41_HB),
+	ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
+	ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
 	{ }
 };
 
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index fd3ebd1be57..72429b6b2fa 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -779,7 +779,7 @@ static void change_speed(struct async_struct *info,
 		info->IER |= UART_IER_MSI;
 	}
 	/* TBD:
-	 * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+	 * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
 	 */
 
 	/*
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 54481a88776..86105efb4eb 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -4,7 +4,7 @@
  * This HVC device driver provides terminal access using
  * z/VM IUCV communication paths.
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008, 2009
  *
  * Author(s):	Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
  */
@@ -15,6 +15,7 @@
 #include <asm/ebcdic.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/init.h>
 #include <linux/mempool.h>
 #include <linux/moduleparam.h>
@@ -74,6 +75,7 @@ struct hvc_iucv_private {
 	wait_queue_head_t	sndbuf_waitq;	/* wait for send completion */
 	struct list_head	tty_outqueue;	/* outgoing IUCV messages */
 	struct list_head	tty_inqueue;	/* incoming IUCV messages */
+	struct device		*dev;		/* device structure */
 };
 
 struct iucv_tty_buffer {
@@ -542,7 +544,68 @@ static void flush_sndbuf_sync(struct hvc_iucv_private *priv)
 
 	if (sync_wait)
 		wait_event_timeout(priv->sndbuf_waitq,
-				   tty_outqueue_empty(priv), HZ);
+				   tty_outqueue_empty(priv), HZ/10);
+}
+
+/**
+ * hvc_iucv_hangup() - Sever IUCV path and schedule hvc tty hang up
+ * @priv:	Pointer to hvc_iucv_private structure
+ *
+ * This routine severs an existing IUCV communication path and hangs
+ * up the underlying HVC terminal device.
+ * The hang-up occurs only if an IUCV communication path is established;
+ * otherwise there is no need to hang up the terminal device.
+ *
+ * The IUCV HVC hang-up is separated into two steps:
+ * 1. After the IUCV path has been severed, the iucv_state is set to
+ *    IUCV_SEVERED.
+ * 2. Later, when the HVC thread calls hvc_iucv_get_chars(), the
+ *    IUCV_SEVERED state causes the tty hang-up in the HVC layer.
+ *
+ * If the tty has not yet been opened, clean up the hvc_iucv_private
+ * structure to allow re-connects.
+ * If the tty has been opened, let get_chars() return -EPIPE to signal
+ * the HVC layer to hang up the tty and, if so, wake up the HVC thread
+ * to call get_chars()...
+ *
+ * Special notes on hanging up a HVC terminal instantiated as console:
+ * Hang-up:	1. do_tty_hangup() replaces file ops (= hung_up_tty_fops)
+ *		2. do_tty_hangup() calls tty->ops->close() for console_filp
+ *			=> no hangup notifier is called by HVC (default)
+ *		2. hvc_close() returns because of tty_hung_up_p(filp)
+ *			=> no delete notifier is called!
+ * Finally, the back-end is not being notified, thus, the tty session is
+ * kept active (TTY_OPEN) to be ready for re-connects.
+ *
+ * Locking:	spin_lock(&priv->lock) w/o disabling bh
+ */
+static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
+{
+	struct iucv_path *path;
+
+	path = NULL;
+	spin_lock(&priv->lock);
+	if (priv->iucv_state == IUCV_CONNECTED) {
+		path = priv->path;
+		priv->path = NULL;
+		priv->iucv_state = IUCV_SEVERED;
+		if (priv->tty_state == TTY_CLOSED)
+			hvc_iucv_cleanup(priv);
+		else
+			/* console is special (see above) */
+			if (priv->is_console) {
+				hvc_iucv_cleanup(priv);
+				priv->tty_state = TTY_OPENED;
+			} else
+				hvc_kick();
+	}
+	spin_unlock(&priv->lock);
+
+	/* finally sever path (outside of priv->lock due to lock ordering) */
+	if (path) {
+		iucv_path_sever(path, NULL);
+		iucv_path_free(path);
+	}
 }
 
 /**
@@ -735,11 +798,8 @@ out_path_handled:
  * @ipuser:	User specified data for this path
  *		(AF_IUCV: port/service name and originator port)
  *
- * The function also severs the path (as required by the IUCV protocol) and
- * sets the iucv state to IUCV_SEVERED for the associated struct
- * hvc_iucv_private instance. Later, the IUCV_SEVERED state triggers a tty
- * hangup (hvc_iucv_get_chars() / hvc_iucv_write()).
- * If tty portion of the HVC is closed, clean up the outqueue.
+ * This function calls the hvc_iucv_hangup() function for the
+ * respective IUCV HVC terminal.
  *
  * Locking:	struct hvc_iucv_private->lock
  */
@@ -747,33 +807,7 @@ static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16])
 {
 	struct hvc_iucv_private *priv = path->private;
 
-	spin_lock(&priv->lock);
-	priv->iucv_state = IUCV_SEVERED;
-
-	/* If the tty has not yet been opened, clean up the hvc_iucv_private
-	 * structure to allow re-connects.
-	 * This is also done for our console device because console hangups
-	 * are handled specially and no notifier is called by HVC.
-	 * The tty session is active (TTY_OPEN) and ready for re-connects...
-	 *
-	 * If it has been opened, let get_chars() return -EPIPE to signal the
-	 * HVC layer to hang up the tty.
-	 * If so, we need to wake up the HVC thread to call get_chars()...
-	 */
-	priv->path = NULL;
-	if (priv->tty_state == TTY_CLOSED)
-		hvc_iucv_cleanup(priv);
-	else
-		if (priv->is_console) {
-			hvc_iucv_cleanup(priv);
-			priv->tty_state = TTY_OPENED;
-		} else
-			hvc_kick();
-	spin_unlock(&priv->lock);
-
-	/* finally sever path (outside of priv->lock due to lock ordering) */
-	iucv_path_sever(path, ipuser);
-	iucv_path_free(path);
+	hvc_iucv_hangup(priv);
 }
 
 /**
@@ -853,6 +887,37 @@ static void hvc_iucv_msg_complete(struct iucv_path *path,
 	destroy_tty_buffer_list(&list_remove);
 }
 
+/**
+ * hvc_iucv_pm_freeze() - Freeze PM callback
+ * @dev:	IUVC HVC terminal device
+ *
+ * Sever an established IUCV communication path and
+ * trigger a hang-up of the underlying HVC terminal.
+ */
+static int hvc_iucv_pm_freeze(struct device *dev)
+{
+	struct hvc_iucv_private *priv = dev_get_drvdata(dev);
+
+	local_bh_disable();
+	hvc_iucv_hangup(priv);
+	local_bh_enable();
+
+	return 0;
+}
+
+/**
+ * hvc_iucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev:	IUVC HVC terminal device
+ *
+ * Wake up the HVC thread to trigger hang-up and respective
+ * HVC back-end notifier invocations.
+ */
+static int hvc_iucv_pm_restore_thaw(struct device *dev)
+{
+	hvc_kick();
+	return 0;
+}
+
 
 /* HVC operations */
 static struct hv_ops hvc_iucv_ops = {
@@ -863,6 +928,20 @@ static struct hv_ops hvc_iucv_ops = {
 	.notifier_hangup = hvc_iucv_notifier_hangup,
 };
 
+/* Suspend / resume device operations */
+static struct dev_pm_ops hvc_iucv_pm_ops = {
+	.freeze	  = hvc_iucv_pm_freeze,
+	.thaw	  = hvc_iucv_pm_restore_thaw,
+	.restore  = hvc_iucv_pm_restore_thaw,
+};
+
+/* IUCV HVC device driver */
+static struct device_driver hvc_iucv_driver = {
+	.name = KMSG_COMPONENT,
+	.bus  = &iucv_bus,
+	.pm   = &hvc_iucv_pm_ops,
+};
+
 /**
  * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance
  * @id:			hvc_iucv_table index
@@ -897,14 +976,12 @@ static int __init hvc_iucv_alloc(int id, unsigned int is_console)
 	/* set console flag */
 	priv->is_console = is_console;
 
-	/* finally allocate hvc */
+	/* allocate hvc device */
 	priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /*		  PAGE_SIZE */
 			      HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256);
 	if (IS_ERR(priv->hvc)) {
 		rc = PTR_ERR(priv->hvc);
-		free_page((unsigned long) priv->sndbuf);
-		kfree(priv);
-		return rc;
+		goto out_error_hvc;
 	}
 
 	/* notify HVC thread instead of using polling */
@@ -915,8 +992,45 @@ static int __init hvc_iucv_alloc(int id, unsigned int is_console)
 	memcpy(priv->srv_name, name, 8);
 	ASCEBC(priv->srv_name, 8);
 
+	/* create and setup device */
+	priv->dev = kzalloc(sizeof(*priv->dev), GFP_KERNEL);
+	if (!priv->dev) {
+		rc = -ENOMEM;
+		goto out_error_dev;
+	}
+	dev_set_name(priv->dev, "hvc_iucv%d", id);
+	dev_set_drvdata(priv->dev, priv);
+	priv->dev->bus = &iucv_bus;
+	priv->dev->parent = iucv_root;
+	priv->dev->driver = &hvc_iucv_driver;
+	priv->dev->release = (void (*)(struct device *)) kfree;
+	rc = device_register(priv->dev);
+	if (rc) {
+		kfree(priv->dev);
+		goto out_error_dev;
+	}
+
 	hvc_iucv_table[id] = priv;
 	return 0;
+
+out_error_dev:
+	hvc_remove(priv->hvc);
+out_error_hvc:
+	free_page((unsigned long) priv->sndbuf);
+	kfree(priv);
+
+	return rc;
+}
+
+/**
+ * hvc_iucv_destroy() - Destroy and free hvc_iucv_private instances
+ */
+static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv)
+{
+	hvc_remove(priv->hvc);
+	device_unregister(priv->dev);
+	free_page((unsigned long) priv->sndbuf);
+	kfree(priv);
 }
 
 /**
@@ -1109,6 +1223,11 @@ static int __init hvc_iucv_init(void)
 		goto out_error;
 	}
 
+	/* register IUCV HVC device driver */
+	rc = driver_register(&hvc_iucv_driver);
+	if (rc)
+		goto out_error;
+
 	/* parse hvc_iucv_allow string and create z/VM user ID filter list */
 	if (hvc_iucv_filter_string) {
 		rc = hvc_iucv_setup_filter(hvc_iucv_filter_string);
@@ -1183,15 +1302,14 @@ out_error_iucv:
 	iucv_unregister(&hvc_iucv_handler, 0);
 out_error_hvc:
 	for (i = 0; i < hvc_iucv_devices; i++)
-		if (hvc_iucv_table[i]) {
-			if (hvc_iucv_table[i]->hvc)
-				hvc_remove(hvc_iucv_table[i]->hvc);
-			kfree(hvc_iucv_table[i]);
-		}
+		if (hvc_iucv_table[i])
+			hvc_iucv_destroy(hvc_iucv_table[i]);
 out_error_memory:
 	mempool_destroy(hvc_iucv_mempool);
 	kmem_cache_destroy(hvc_iucv_buffer_cache);
 out_error:
+	if (hvc_iucv_filter)
+		kfree(hvc_iucv_filter);
 	hvc_iucv_devices = 0; /* ensure that we do not provide any device */
 	return rc;
 }
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 5fab6470f4b..f4b3f7293fe 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -88,7 +88,7 @@ config HW_RANDOM_N2RNG
 
 config HW_RANDOM_VIA
 	tristate "VIA HW Random Number Generator support"
-	depends on HW_RANDOM && X86_32
+	depends on HW_RANDOM && X86
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called virtio-rng.  If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+	tristate "Freescale i.MX RNGA Random Number Generator"
+	depends on HW_RANDOM && ARCH_HAS_RNGA
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Freescale i.MX processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mxc-rnga.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a5f28..fd1ecd2f673 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 00000000000..187c6be80f4
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL			0x00
+#define RNGA_STATUS			0x04
+#define RNGA_ENTROPY			0x08
+#define RNGA_OUTPUT_FIFO		0x0c
+#define RNGA_MODE			0x10
+#define RNGA_VERIFICATION_CONTROL	0x14
+#define RNGA_OSC_CONTROL_COUNTER	0x18
+#define RNGA_OSC1_COUNTER		0x1c
+#define RNGA_OSC2_COUNTER		0x20
+#define RNGA_OSC_COUNTER_STATUS		0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE			0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP		0x00000010
+#define RNGA_CONTROL_CLEAR_INT		0x00000008
+#define RNGA_CONTROL_MASK_INTS		0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE	0x00000002
+#define RNGA_CONTROL_GO			0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK		0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD		0x80000000
+#define RNGA_STATUS_SLEEP		0x00000010
+#define RNGA_STATUS_ERROR_INT		0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW	0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS	0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION	0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+	int level;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* how many random numbers is in FIFO? [0-16] */
+	level = ((__raw_readl(rng_base + RNGA_STATUS) &
+			RNGA_STATUS_LEVEL_MASK) >> 8);
+
+	return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+	int err;
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* retrieve a random number from FIFO */
+	*data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+	/* some error while reading this random number? */
+	err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+	/* if error: clear error interrupt, but doesn't return random number */
+	if (err) {
+		dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+		ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+		__raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+					rng_base + RNGA_CONTROL);
+		return 0;
+	} else
+		return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+	u32 ctrl, osc;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* wake up */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+	/* verify if oscillator is working */
+	osc = __raw_readl(rng_base + RNGA_STATUS);
+	if (osc & RNGA_STATUS_OSC_DEAD) {
+		dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+		return -ENODEV;
+	}
+
+	/* go running */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+	return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+	/* stop rnga */
+	__raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+	.name = "mxc-rnga",
+	.init = mxc_rnga_init,
+	.cleanup = mxc_rnga_cleanup,
+	.data_present = mxc_rnga_data_present,
+	.data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	struct clk *clk;
+	struct resource *res, *mem;
+	void __iomem *rng_base = NULL;
+
+	if (rng_dev)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "rng");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Could not get rng_clk!\n");
+		err = PTR_ERR(clk);
+		goto out;
+	}
+
+	clk_enable(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENOENT;
+		goto err_region;
+	}
+
+	mem = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (mem == NULL) {
+		err = -EBUSY;
+		goto err_region;
+	}
+
+	rng_base = ioremap(res->start, resource_size(res));
+	if (!rng_base) {
+		err = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	mxc_rnga.priv = (unsigned long)rng_base;
+
+	err = hwrng_register(&mxc_rnga);
+	if (err) {
+		dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+		goto err_register;
+	}
+
+	rng_dev = pdev;
+
+	dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+	return 0;
+
+err_register:
+	iounmap(rng_base);
+	rng_base = NULL;
+
+err_ioremap:
+	release_mem_region(res->start, resource_size(res));
+
+err_region:
+	clk_disable(clk);
+	clk_put(clk);
+
+out:
+	return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+	struct clk *clk = clk_get(&pdev->dev, "rng");
+
+	hwrng_unregister(&mxc_rnga);
+
+	iounmap(rng_base);
+
+	release_mem_region(res->start, resource_size(res));
+
+	clk_disable(clk);
+	clk_put(clk);
+
+	return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+	.driver = {
+		   .name = "mxc_rnga",
+		   .owner = THIS_MODULE,
+		   },
+	.remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+	return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+	platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 538313f9e7a..00dd3de1be5 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -89,7 +89,7 @@ static struct hwrng omap_rng_ops = {
 	.data_read	= omap_rng_data_read,
 };
 
-static int __init omap_rng_probe(struct platform_device *pdev)
+static int __devinit omap_rng_probe(struct platform_device *pdev)
 {
 	struct resource *res, *mem;
 	int ret;
diff --git a/drivers/char/hw_random/timeriomem-rng.c b/drivers/char/hw_random/timeriomem-rng.c
index dcd352ad0e7..a94e930575f 100644
--- a/drivers/char/hw_random/timeriomem-rng.c
+++ b/drivers/char/hw_random/timeriomem-rng.c
@@ -88,9 +88,9 @@ static struct hwrng timeriomem_rng_ops = {
 	.priv		= 0,
 };
 
-static int __init timeriomem_rng_probe(struct platform_device *pdev)
+static int __devinit timeriomem_rng_probe(struct platform_device *pdev)
 {
-	struct resource *res, *mem;
+	struct resource *res;
 	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -98,21 +98,12 @@ static int __init timeriomem_rng_probe(struct platform_device *pdev)
 	if (!res)
 		return -ENOENT;
 
-	mem = request_mem_region(res->start, res->end - res->start + 1,
-				 pdev->name);
-	if (mem == NULL)
-		return -EBUSY;
-
-	dev_set_drvdata(&pdev->dev, mem);
-
 	timeriomem_rng_data = pdev->dev.platform_data;
 
 	timeriomem_rng_data->address = ioremap(res->start,
 						res->end - res->start + 1);
-	if (!timeriomem_rng_data->address) {
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
+	if (!timeriomem_rng_data->address)
+		return -EIO;
 
 	if (timeriomem_rng_data->period != 0
 		&& usecs_to_jiffies(timeriomem_rng_data->period) > 0) {
@@ -125,7 +116,7 @@ static int __init timeriomem_rng_probe(struct platform_device *pdev)
 
 	ret = hwrng_register(&timeriomem_rng_ops);
 	if (ret)
-		goto err_register;
+		goto failed;
 
 	dev_info(&pdev->dev, "32bits from 0x%p @ %dus\n",
 			timeriomem_rng_data->address,
@@ -133,24 +124,19 @@ static int __init timeriomem_rng_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_register:
+failed:
 	dev_err(&pdev->dev, "problem registering\n");
 	iounmap(timeriomem_rng_data->address);
-err_ioremap:
-	release_resource(mem);
 
 	return ret;
 }
 
 static int __devexit timeriomem_rng_remove(struct platform_device *pdev)
 {
-	struct resource *mem = dev_get_drvdata(&pdev->dev);
-
 	del_timer_sync(&timeriomem_rng_timer);
 	hwrng_unregister(&timeriomem_rng_ops);
 
 	iounmap(timeriomem_rng_data->address);
-	release_resource(mem);
 
 	return 0;
 }
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index 4e9573c1d39..794aacb715c 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -132,6 +132,19 @@ static int via_rng_init(struct hwrng *rng)
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 lo, hi, old_lo;
 
+	/* VIA Nano CPUs don't have the MSR_VIA_RNG anymore.  The RNG
+	 * is always enabled if CPUID rng_en is set.  There is no
+	 * RNG configuration like it used to be the case in this
+	 * register */
+	if ((c->x86 == 6) && (c->x86_model >= 0x0f)) {
+		if (!cpu_has_xstore_enabled) {
+			printk(KERN_ERR PFX "can't enable hardware RNG "
+				"if XSTORE is not enabled\n");
+			return -ENODEV;
+		}
+		return 0;
+	}
+
 	/* Control the RNG via MSR.  Tread lightly and pay very close
 	 * close attention to values written, as the reserved fields
 	 * are documented to be "undefined and unpredictable"; but it
@@ -205,5 +218,5 @@ static void __exit mod_exit(void)
 module_init(mod_init);
 module_exit(mod_exit);
 
-MODULE_DESCRIPTION("H/W RNG driver for VIA chipsets");
+MODULE_DESCRIPTION("H/W RNG driver for VIA CPU with PadLock");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 86e83f88313..32216b62324 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -35,13 +35,13 @@ static DECLARE_COMPLETION(have_data);
 
 static void random_recv_done(struct virtqueue *vq)
 {
-	int len;
+	unsigned int len;
 
 	/* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
 	if (!vq->vq_ops->get_buf(vq, &len))
 		return;
 
-	data_left = len / sizeof(random_data[0]);
+	data_left += len;
 	complete(&have_data);
 }
 
@@ -49,7 +49,7 @@ static void register_buffer(void)
 {
 	struct scatterlist sg;
 
-	sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+	sg_init_one(&sg, random_data+data_left, RANDOM_DATA_SIZE-data_left);
 	/* There should always be room for one buffer. */
 	if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
 		BUG();
@@ -59,24 +59,32 @@ static void register_buffer(void)
 /* At least we don't udelay() in a loop like some other drivers. */
 static int virtio_data_present(struct hwrng *rng, int wait)
 {
-	if (data_left)
+	if (data_left >= sizeof(u32))
 		return 1;
 
+again:
 	if (!wait)
 		return 0;
 
 	wait_for_completion(&have_data);
+
+	/* Not enough?  Re-register. */
+	if (unlikely(data_left < sizeof(u32))) {
+		register_buffer();
+		goto again;
+	}
+
 	return 1;
 }
 
 /* virtio_data_present() must have succeeded before this is called. */
 static int virtio_data_read(struct hwrng *rng, u32 *data)
 {
-	BUG_ON(!data_left);
-
-	*data = random_data[--data_left];
+	BUG_ON(data_left < sizeof(u32));
+	data_left -= sizeof(u32);
+	*data = random_data[data_left / 4];
 
-	if (!data_left) {
+	if (data_left < sizeof(u32)) {
 		init_completion(&have_data);
 		register_buffer();
 	}
@@ -94,13 +102,13 @@ static int virtrng_probe(struct virtio_device *vdev)
 	int err;
 
 	/* We expect a single virtqueue. */
-	vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+	vq = virtio_find_single_vq(vdev, random_recv_done, "input");
 	if (IS_ERR(vq))
 		return PTR_ERR(vq);
 
 	err = hwrng_register(&virtio_hwrng);
 	if (err) {
-		vdev->config->del_vq(vq);
+		vdev->config->del_vqs(vdev);
 		return err;
 	}
 
@@ -112,7 +120,7 @@ static void virtrng_remove(struct virtio_device *vdev)
 {
 	vdev->config->reset(vdev);
 	hwrng_unregister(&virtio_hwrng);
-	vdev->config->del_vq(vq);
+	vdev->config->del_vqs(vdev);
 }
 
 static struct virtio_device_id id_table[] = {
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index afbe45676d7..f424d394a28 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -33,48 +33,64 @@
 
 struct ps3flash_private {
 	struct mutex mutex;	/* Bounce buffer mutex */
+	u64 chunk_sectors;
+	int tag;		/* Start sector of buffer, -1 if invalid */
+	bool dirty;
 };
 
 static struct ps3_storage_device *ps3flash_dev;
 
-static ssize_t ps3flash_read_write_sectors(struct ps3_storage_device *dev,
-					   u64 lpar, u64 start_sector,
-					   u64 sectors, int write)
+static int ps3flash_read_write_sectors(struct ps3_storage_device *dev,
+				       u64 start_sector, int write)
 {
-	u64 res = ps3stor_read_write_sectors(dev, lpar, start_sector, sectors,
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	u64 res = ps3stor_read_write_sectors(dev, dev->bounce_lpar,
+					     start_sector, priv->chunk_sectors,
 					     write);
 	if (res) {
 		dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
 			__LINE__, write ? "write" : "read", res);
 		return -EIO;
 	}
-	return sectors;
+	return 0;
 }
 
-static ssize_t ps3flash_read_sectors(struct ps3_storage_device *dev,
-				     u64 start_sector, u64 sectors,
-				     unsigned int sector_offset)
+static int ps3flash_writeback(struct ps3_storage_device *dev)
 {
-	u64 max_sectors, lpar;
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	int res;
 
-	max_sectors = dev->bounce_size / dev->blk_size;
-	if (sectors > max_sectors) {
-		dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %llu\n",
-			__func__, __LINE__, max_sectors);
-		sectors = max_sectors;
-	}
+	if (!priv->dirty || priv->tag < 0)
+		return 0;
 
-	lpar = dev->bounce_lpar + sector_offset * dev->blk_size;
-	return ps3flash_read_write_sectors(dev, lpar, start_sector, sectors,
-					   0);
+	res = ps3flash_read_write_sectors(dev, priv->tag, 1);
+	if (res)
+		return res;
+
+	priv->dirty = false;
+	return 0;
 }
 
-static ssize_t ps3flash_write_chunk(struct ps3_storage_device *dev,
-				    u64 start_sector)
+static int ps3flash_fetch(struct ps3_storage_device *dev, u64 start_sector)
 {
-       u64 sectors = dev->bounce_size / dev->blk_size;
-       return ps3flash_read_write_sectors(dev, dev->bounce_lpar, start_sector,
-					  sectors, 1);
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	int res;
+
+	if (start_sector == priv->tag)
+		return 0;
+
+	res = ps3flash_writeback(dev);
+	if (res)
+		return res;
+
+	priv->tag = -1;
+
+	res = ps3flash_read_write_sectors(dev, start_sector, 0);
+	if (res)
+		return res;
+
+	priv->tag = start_sector;
+	return 0;
 }
 
 static loff_t ps3flash_llseek(struct file *file, loff_t offset, int origin)
@@ -104,18 +120,19 @@ out:
 	return res;
 }
 
-static ssize_t ps3flash_read(struct file *file, char __user *buf, size_t count,
-			     loff_t *pos)
+static ssize_t ps3flash_read(char __user *userbuf, void *kernelbuf,
+			     size_t count, loff_t *pos)
 {
 	struct ps3_storage_device *dev = ps3flash_dev;
-	struct ps3flash_private *priv = dev->sbd.core.driver_data;
-	u64 size, start_sector, end_sector, offset;
-	ssize_t sectors_read;
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	u64 size, sector, offset;
+	int res;
 	size_t remaining, n;
+	const void *src;
 
 	dev_dbg(&dev->sbd.core,
-		"%s:%u: Reading %zu bytes at position %lld to user 0x%p\n",
-		__func__, __LINE__, count, *pos, buf);
+		"%s:%u: Reading %zu bytes at position %lld to U0x%p/K0x%p\n",
+		__func__, __LINE__, count, *pos, userbuf, kernelbuf);
 
 	size = dev->regions[dev->region_idx].size*dev->blk_size;
 	if (*pos >= size || !count)
@@ -128,61 +145,63 @@ static ssize_t ps3flash_read(struct file *file, char __user *buf, size_t count,
 		count = size - *pos;
 	}
 
-	start_sector = *pos / dev->blk_size;
-	offset = *pos % dev->blk_size;
-	end_sector = DIV_ROUND_UP(*pos + count, dev->blk_size);
+	sector = *pos / dev->bounce_size * priv->chunk_sectors;
+	offset = *pos % dev->bounce_size;
 
 	remaining = count;
 	do {
+		n = min_t(u64, remaining, dev->bounce_size - offset);
+		src = dev->bounce_buf + offset;
+
 		mutex_lock(&priv->mutex);
 
-		sectors_read = ps3flash_read_sectors(dev, start_sector,
-						     end_sector-start_sector,
-						     0);
-		if (sectors_read < 0) {
-			mutex_unlock(&priv->mutex);
+		res = ps3flash_fetch(dev, sector);
+		if (res)
 			goto fail;
-		}
 
-		n = min_t(u64, remaining, sectors_read*dev->blk_size-offset);
 		dev_dbg(&dev->sbd.core,
-			"%s:%u: copy %lu bytes from 0x%p to user 0x%p\n",
-			__func__, __LINE__, n, dev->bounce_buf+offset, buf);
-		if (copy_to_user(buf, dev->bounce_buf+offset, n)) {
-			mutex_unlock(&priv->mutex);
-			sectors_read = -EFAULT;
-			goto fail;
+			"%s:%u: copy %lu bytes from 0x%p to U0x%p/K0x%p\n",
+			__func__, __LINE__, n, src, userbuf, kernelbuf);
+		if (userbuf) {
+			if (copy_to_user(userbuf, src, n)) {
+				res = -EFAULT;
+				goto fail;
+			}
+			userbuf += n;
+		}
+		if (kernelbuf) {
+			memcpy(kernelbuf, src, n);
+			kernelbuf += n;
 		}
 
 		mutex_unlock(&priv->mutex);
 
 		*pos += n;
-		buf += n;
 		remaining -= n;
-		start_sector += sectors_read;
+		sector += priv->chunk_sectors;
 		offset = 0;
 	} while (remaining > 0);
 
 	return count;
 
 fail:
-	return sectors_read;
+	mutex_unlock(&priv->mutex);
+	return res;
 }
 
-static ssize_t ps3flash_write(struct file *file, const char __user *buf,
-			      size_t count, loff_t *pos)
+static ssize_t ps3flash_write(const char __user *userbuf,
+			      const void *kernelbuf, size_t count, loff_t *pos)
 {
 	struct ps3_storage_device *dev = ps3flash_dev;
-	struct ps3flash_private *priv = dev->sbd.core.driver_data;
-	u64 size, chunk_sectors, start_write_sector, end_write_sector,
-	    end_read_sector, start_read_sector, head, tail, offset;
-	ssize_t res;
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	u64 size, sector, offset;
+	int res = 0;
 	size_t remaining, n;
-	unsigned int sec_off;
+	void *dst;
 
 	dev_dbg(&dev->sbd.core,
-		"%s:%u: Writing %zu bytes at position %lld from user 0x%p\n",
-		__func__, __LINE__, count, *pos, buf);
+		"%s:%u: Writing %zu bytes at position %lld from U0x%p/K0x%p\n",
+		__func__, __LINE__, count, *pos, userbuf, kernelbuf);
 
 	size = dev->regions[dev->region_idx].size*dev->blk_size;
 	if (*pos >= size || !count)
@@ -195,89 +214,46 @@ static ssize_t ps3flash_write(struct file *file, const char __user *buf,
 		count = size - *pos;
 	}
 
-	chunk_sectors = dev->bounce_size / dev->blk_size;
-
-	start_write_sector = *pos / dev->bounce_size * chunk_sectors;
+	sector = *pos / dev->bounce_size * priv->chunk_sectors;
 	offset = *pos % dev->bounce_size;
-	end_write_sector = DIV_ROUND_UP(*pos + count, dev->bounce_size) *
-			   chunk_sectors;
-
-	end_read_sector = DIV_ROUND_UP(*pos, dev->blk_size);
-	start_read_sector = (*pos + count) / dev->blk_size;
-
-	/*
-	 * As we have to write in 256 KiB chunks, while we can read in blk_size
-	 * (usually 512 bytes) chunks, we perform the following steps:
-	 *   1. Read from start_write_sector to end_read_sector ("head")
-	 *   2. Read from start_read_sector to end_write_sector ("tail")
-	 *   3. Copy data to buffer
-	 *   4. Write from start_write_sector to end_write_sector
-	 * All of this is complicated by using only one 256 KiB bounce buffer.
-	 */
-
-	head = end_read_sector - start_write_sector;
-	tail = end_write_sector - start_read_sector;
 
 	remaining = count;
 	do {
+		n = min_t(u64, remaining, dev->bounce_size - offset);
+		dst = dev->bounce_buf + offset;
+
 		mutex_lock(&priv->mutex);
 
-		if (end_read_sector >= start_read_sector) {
-			/* Merge head and tail */
-			dev_dbg(&dev->sbd.core,
-				"Merged head and tail: %llu sectors at %llu\n",
-				chunk_sectors, start_write_sector);
-			res = ps3flash_read_sectors(dev, start_write_sector,
-						    chunk_sectors, 0);
-			if (res < 0)
+		if (n != dev->bounce_size)
+			res = ps3flash_fetch(dev, sector);
+		else if (sector != priv->tag)
+			res = ps3flash_writeback(dev);
+		if (res)
+			goto fail;
+
+		dev_dbg(&dev->sbd.core,
+			"%s:%u: copy %lu bytes from U0x%p/K0x%p to 0x%p\n",
+			__func__, __LINE__, n, userbuf, kernelbuf, dst);
+		if (userbuf) {
+			if (copy_from_user(dst, userbuf, n)) {
+				res = -EFAULT;
 				goto fail;
-		} else {
-			if (head) {
-				/* Read head */
-				dev_dbg(&dev->sbd.core,
-					"head: %llu sectors at %llu\n", head,
-					start_write_sector);
-				res = ps3flash_read_sectors(dev,
-							    start_write_sector,
-							    head, 0);
-				if (res < 0)
-					goto fail;
-			}
-			if (start_read_sector <
-			    start_write_sector+chunk_sectors) {
-				/* Read tail */
-				dev_dbg(&dev->sbd.core,
-					"tail: %llu sectors at %llu\n", tail,
-					start_read_sector);
-				sec_off = start_read_sector-start_write_sector;
-				res = ps3flash_read_sectors(dev,
-							    start_read_sector,
-							    tail, sec_off);
-				if (res < 0)
-					goto fail;
 			}
+			userbuf += n;
 		}
-
-		n = min_t(u64, remaining, dev->bounce_size-offset);
-		dev_dbg(&dev->sbd.core,
-			"%s:%u: copy %lu bytes from user 0x%p to 0x%p\n",
-			__func__, __LINE__, n, buf, dev->bounce_buf+offset);
-		if (copy_from_user(dev->bounce_buf+offset, buf, n)) {
-			res = -EFAULT;
-			goto fail;
+		if (kernelbuf) {
+			memcpy(dst, kernelbuf, n);
+			kernelbuf += n;
 		}
 
-		res = ps3flash_write_chunk(dev, start_write_sector);
-		if (res < 0)
-			goto fail;
+		priv->tag = sector;
+		priv->dirty = true;
 
 		mutex_unlock(&priv->mutex);
 
 		*pos += n;
-		buf += n;
 		remaining -= n;
-		start_write_sector += chunk_sectors;
-		head = 0;
+		sector += priv->chunk_sectors;
 		offset = 0;
 	} while (remaining > 0);
 
@@ -288,6 +264,51 @@ fail:
 	return res;
 }
 
+static ssize_t ps3flash_user_read(struct file *file, char __user *buf,
+				  size_t count, loff_t *pos)
+{
+	return ps3flash_read(buf, NULL, count, pos);
+}
+
+static ssize_t ps3flash_user_write(struct file *file, const char __user *buf,
+				   size_t count, loff_t *pos)
+{
+	return ps3flash_write(buf, NULL, count, pos);
+}
+
+static ssize_t ps3flash_kernel_read(void *buf, size_t count, loff_t pos)
+{
+	return ps3flash_read(NULL, buf, count, &pos);
+}
+
+static ssize_t ps3flash_kernel_write(const void *buf, size_t count,
+				     loff_t pos)
+{
+	ssize_t res;
+	int wb;
+
+	res = ps3flash_write(NULL, buf, count, &pos);
+	if (res < 0)
+		return res;
+
+	/* Make kernel writes synchronous */
+	wb = ps3flash_writeback(ps3flash_dev);
+	if (wb)
+		return wb;
+
+	return res;
+}
+
+static int ps3flash_flush(struct file *file, fl_owner_t id)
+{
+	return ps3flash_writeback(ps3flash_dev);
+}
+
+static int ps3flash_fsync(struct file *file, struct dentry *dentry,
+			  int datasync)
+{
+	return ps3flash_writeback(ps3flash_dev);
+}
 
 static irqreturn_t ps3flash_interrupt(int irq, void *data)
 {
@@ -312,12 +333,18 @@ static irqreturn_t ps3flash_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-
 static const struct file_operations ps3flash_fops = {
 	.owner	= THIS_MODULE,
 	.llseek	= ps3flash_llseek,
-	.read	= ps3flash_read,
-	.write	= ps3flash_write,
+	.read	= ps3flash_user_read,
+	.write	= ps3flash_user_write,
+	.flush	= ps3flash_flush,
+	.fsync	= ps3flash_fsync,
+};
+
+static const struct ps3_os_area_flash_ops ps3flash_kernel_ops = {
+	.read	= ps3flash_kernel_read,
+	.write	= ps3flash_kernel_write,
 };
 
 static struct miscdevice ps3flash_misc = {
@@ -366,11 +393,13 @@ static int __devinit ps3flash_probe(struct ps3_system_bus_device *_dev)
 		goto fail;
 	}
 
-	dev->sbd.core.driver_data = priv;
+	ps3_system_bus_set_drvdata(&dev->sbd, priv);
 	mutex_init(&priv->mutex);
+	priv->tag = -1;
 
 	dev->bounce_size = ps3flash_bounce_buffer.size;
 	dev->bounce_buf = ps3flash_bounce_buffer.address;
+	priv->chunk_sectors = dev->bounce_size / dev->blk_size;
 
 	error = ps3stor_setup(dev, ps3flash_interrupt);
 	if (error)
@@ -386,13 +415,15 @@ static int __devinit ps3flash_probe(struct ps3_system_bus_device *_dev)
 
 	dev_info(&dev->sbd.core, "%s:%u: registered misc device %d\n",
 		 __func__, __LINE__, ps3flash_misc.minor);
+
+	ps3_os_area_flash_register(&ps3flash_kernel_ops);
 	return 0;
 
 fail_teardown:
 	ps3stor_teardown(dev);
 fail_free_priv:
 	kfree(priv);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
 fail:
 	ps3flash_dev = NULL;
 	return error;
@@ -402,10 +433,11 @@ static int ps3flash_remove(struct ps3_system_bus_device *_dev)
 {
 	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
 
+	ps3_os_area_flash_register(NULL);
 	misc_deregister(&ps3flash_misc);
 	ps3stor_teardown(dev);
-	kfree(dev->sbd.core.driver_data);
-	dev->sbd.core.driver_data = NULL;
+	kfree(ps3_system_bus_get_drvdata(&dev->sbd));
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
 	ps3flash_dev = NULL;
 	return 0;
 }
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 5acd29e6e04..daebe1ba43d 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -95,23 +95,34 @@ static void pty_unthrottle(struct tty_struct *tty)
  * a count.
  *
  * FIXME: Our pty_write method is called with our ldisc lock held but
- * not our partners. We can't just take the other one blindly without
- * risking deadlocks.
+ * not our partners. We can't just wait on the other one blindly without
+ * risking deadlocks. At some point when everything has settled down we need
+ * to look into making pty_write at least able to sleep over an ldisc change.
+ *
+ * The return on no ldisc is a bit counter intuitive but the logic works
+ * like this. During an ldisc change the other end will flush its buffers. We
+ * thus return the full length which is identical to the case where we had
+ * proper locking and happened to queue the bytes just before the flush during
+ * the ldisc change.
  */
 static int pty_write(struct tty_struct *tty, const unsigned char *buf,
 								int count)
 {
 	struct tty_struct *to = tty->link;
-	int	c;
+	struct tty_ldisc *ld;
+	int c = count;
 
 	if (!to || tty->stopped)
 		return 0;
-
-	c = to->receive_room;
-	if (c > count)
-		c = count;
-	to->ldisc->ops->receive_buf(to, buf, NULL, c);
-
+	ld = tty_ldisc_ref(to);
+
+	if (ld) {
+		c = to->receive_room;
+		if (c > count)
+			c = count;
+		ld->ops->receive_buf(to, buf, NULL, c);
+		tty_ldisc_deref(ld);
+	}
 	return c;
 }
 
@@ -145,14 +156,23 @@ static int pty_write_room(struct tty_struct *tty)
 static int pty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;
-	int count;
+	struct tty_ldisc *ld;
+	int count = 0;
 
 	/* We should get the line discipline lock for "tty->link" */
-	if (!to || !to->ldisc->ops->chars_in_buffer)
+	if (!to)
+		return 0;
+	/* We cannot take a sleeping reference here without deadlocking with
+	   an ldisc change - but it doesn't really matter */
+	ld = tty_ldisc_ref(to);
+	if (ld == NULL)
 		return 0;
 
 	/* The ldisc must report 0 if no characters available to be read */
-	count = to->ldisc->ops->chars_in_buffer(to);
+	if (ld->ops->chars_in_buffer)
+		count = ld->ops->chars_in_buffer(to);
+
+	tty_ldisc_deref(ld);
 
 	if (tty->driver->subtype == PTY_TYPE_SLAVE)
 		return count;
@@ -182,12 +202,19 @@ static void pty_flush_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;
 	unsigned long flags;
+	struct tty_ldisc *ld;
 
 	if (!to)
 		return;
+	ld = tty_ldisc_ref(to);
+
+	/* The other end is changing discipline */
+	if (!ld)
+		return;
 
-	if (to->ldisc->ops->flush_buffer)
+	if (ld->ops->flush_buffer)
 		to->ldisc->ops->flush_buffer(to);
+	tty_ldisc_deref(ld);
 
 	if (to->packet) {
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 939e198d767..a3afa0c387c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1263,7 +1263,9 @@ static int tty_reopen(struct tty_struct *tty)
 	tty->count++;
 	tty->driver = driver; /* N.B. why do this every time?? */
 
+	mutex_lock(&tty->ldisc_mutex);
 	WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
+	mutex_unlock(&tty->ldisc_mutex);
 
 	return 0;
 }
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 8116bb1c8f8..b24f6c6a1ea 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -947,7 +947,6 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 	void __user *p = (void __user *)arg;
 	int ret = 0;
 	struct ktermios kterm;
-	struct termiox ktermx;
 
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
@@ -1049,7 +1048,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return ret;
 #endif
 #ifdef TCGETX
-	case TCGETX:
+	case TCGETX: {
+		struct termiox ktermx;
 		if (real_tty->termiox == NULL)
 			return -EINVAL;
 		mutex_lock(&real_tty->termios_mutex);
@@ -1058,6 +1058,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
 			ret = -EFAULT;
 		return ret;
+	}
 	case TCSETX:
 		return set_termiox(real_tty, p, 0);
 	case TCSETXW:
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 39c8f86dedd..a19e935847b 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -148,8 +148,10 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc)
 		}
 	}
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	if (err)
+	if (err) {
+		kfree(ld);
 		return ERR_PTR(err);
+	}
 	return ld;
 }
 
@@ -205,6 +207,7 @@ static void tty_ldisc_put(struct tty_ldisc *ld)
 	ldo->refcount--;
 	module_put(ldo->owner);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	WARN_ON(ld->refcount);
 	kfree(ld);
 }
 
@@ -262,7 +265,7 @@ const struct file_operations tty_ldiscs_proc_fops = {
  *	@ld: line discipline
  *
  *	Install an instance of a line discipline into a tty structure. The
- *	ldisc must have a reference count above zero to ensure it remains/
+ *	ldisc must have a reference count above zero to ensure it remains.
  *	The tty instance refcount starts at zero.
  *
  *	Locking:
@@ -791,6 +794,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 		/* Avoid racing set_ldisc */
 		mutex_lock(&tty->ldisc_mutex);
 		/* Switch back to N_TTY */
+		tty_ldisc_halt(tty);
+		tty_ldisc_wait_idle(tty);
 		tty_ldisc_reinit(tty);
 		/* At this point we have a closed ldisc and we want to
 		   reopen it. We could defer this to the next open but
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index ffc9254f7e0..042c8149a6d 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -867,7 +867,7 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	int j;
 	struct device_node *node = vdev->dev.archdata.of_node;
 
-	if (i > VIOTAPE_MAX_TAPE)
+	if (i >= VIOTAPE_MAX_TAPE)
 		return -ENODEV;
 	if (!node)
 		return -ENODEV;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index ff6f5a4b58f..c74dacfa679 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -188,6 +188,9 @@ static void hvc_handle_input(struct virtqueue *vq)
  * Finally we put our input buffer in the input queue, ready to receive. */
 static int __devinit virtcons_probe(struct virtio_device *dev)
 {
+	vq_callback_t *callbacks[] = { hvc_handle_input, NULL};
+	const char *names[] = { "input", "output" };
+	struct virtqueue *vqs[2];
 	int err;
 
 	vdev = dev;
@@ -199,20 +202,15 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 		goto fail;
 	}
 
-	/* Find the input queue. */
+	/* Find the queues. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, 0, hvc_handle_input);
-	if (IS_ERR(in_vq)) {
-		err = PTR_ERR(in_vq);
+	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	if (err)
 		goto free;
-	}
 
-	out_vq = vdev->config->find_vq(vdev, 1, NULL);
-	if (IS_ERR(out_vq)) {
-		err = PTR_ERR(out_vq);
-		goto free_in_vq;
-	}
+	in_vq = vqs[0];
+	out_vq = vqs[1];
 
 	/* Start using the new console output. */
 	virtio_cons.get_chars = get_chars;
@@ -233,17 +231,15 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
 	if (IS_ERR(hvc)) {
 		err = PTR_ERR(hvc);
-		goto free_out_vq;
+		goto free_vqs;
 	}
 
 	/* Register the input buffer the first time. */
 	add_inbuf();
 	return 0;
 
-free_out_vq:
-	vdev->config->del_vq(out_vq);
-free_in_vq:
-	vdev->config->del_vq(in_vq);
+free_vqs:
+	vdev->config->del_vqs(vdev);
 free:
 	kfree(inbuf);
 fail:
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index de9ebee8657..c796a86ab7f 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -103,7 +103,6 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/uaccess.h>
-#include <linux/kmemleak.h>
 
 #define MAX_NR_CON_DRIVER 16
 
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 100bfd42206..6e6730f9dfd 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -7,7 +7,7 @@ menuconfig CONNECTOR
 	  of the netlink socket protocol.
 
 	  Connector support can also be built as a module.  If so, the module
-	  will be called cn.ko.
+	  will be called cn.
 
 if CONNECTOR
 
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 01afd758072..5b27692372b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -12,7 +12,7 @@ if CRYPTO_HW
 
 config CRYPTO_DEV_PADLOCK
 	tristate "Support for VIA PadLock ACE"
-	depends on X86_32 && !UML
+	depends on X86 && !UML
 	select CRYPTO_ALGAPI
 	help
 	  Some VIA processors come with an integrated crypto engine
@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
 	  Available in VIA C3 and newer CPUs.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-aes.ko
+	  called padlock-aes.
 
 config CRYPTO_DEV_PADLOCK_SHA
 	tristate "PadLock driver for SHA1 and SHA256 algorithms"
@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
 	  Available in VIA C7 and newer processors.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-sha.ko
+	  called padlock-sha.
 
 config CRYPTO_DEV_GEODE
 	tristate "Support for the Geode LX AES engine"
@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
 	bool "Monolithic zcrypt module"
 	depends on ZCRYPT="m"
 	help
-	  Select this option if you want to have a single module z90crypt.ko
+	  Select this option if you want to have a single module z90crypt,
 	  that contains all parts of the crypto device driver (ap bus,
 	  request router and all the card drivers).
 
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 2bef086fb34..5f753fc0873 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -2564,7 +2564,7 @@ static void hifn_tasklet_callback(unsigned long data)
 		hifn_process_queue(dev);
 }
 
-static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int err, i;
 	struct hifn_device *dev;
@@ -2696,7 +2696,7 @@ err_out_disable_pci_device:
 	return err;
 }
 
-static void hifn_remove(struct pci_dev *pdev)
+static void __devexit hifn_remove(struct pci_dev *pdev)
 {
 	int i;
 	struct hifn_device *dev;
@@ -2744,7 +2744,7 @@ static struct pci_driver hifn_pci_driver = {
 	.remove   = __devexit_p(hifn_remove),
 };
 
-static int __devinit hifn_init(void)
+static int __init hifn_init(void)
 {
 	unsigned int freq;
 	int err;
@@ -2789,7 +2789,7 @@ static int __devinit hifn_init(void)
 	return 0;
 }
 
-static void __devexit hifn_fini(void)
+static void __exit hifn_fini(void)
 {
 	pci_unregister_driver(&hifn_pci_driver);
 
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 856b3cc2558..87f92c39b5f 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -154,7 +154,11 @@ static inline void padlock_reset_key(struct cword *cword)
 	int cpu = raw_smp_processor_id();
 
 	if (cword != per_cpu(last_cword, cpu))
+#ifndef CONFIG_X86_64
 		asm volatile ("pushfl; popfl");
+#else
+		asm volatile ("pushfq; popfq");
+#endif
 }
 
 static inline void padlock_store_cword(struct cword *cword)
@@ -208,10 +212,19 @@ static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key,
 
 	asm volatile ("test $1, %%cl;"
 		      "je 1f;"
+#ifndef CONFIG_X86_64
 		      "lea -1(%%ecx), %%eax;"
 		      "mov $1, %%ecx;"
+#else
+		      "lea -1(%%rcx), %%rax;"
+		      "mov $1, %%rcx;"
+#endif
 		      ".byte 0xf3,0x0f,0xa7,0xc8;"	/* rep xcryptecb */
+#ifndef CONFIG_X86_64
 		      "mov %%eax, %%ecx;"
+#else
+		      "mov %%rax, %%rcx;"
+#endif
 		      "1:"
 		      ".byte 0xf3,0x0f,0xa7,0xc8"	/* rep xcryptecb */
 		      : "+S"(input), "+D"(output)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index a3918c16b3d..c70775fd3ce 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -44,6 +44,8 @@
 #include <crypto/sha.h>
 #include <crypto/aead.h>
 #include <crypto/authenc.h>
+#include <crypto/skcipher.h>
+#include <crypto/scatterwalk.h>
 
 #include "talitos.h"
 
@@ -339,7 +341,8 @@ static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
 				status = error;
 
 		dma_unmap_single(dev, request->dma_desc,
-			sizeof(struct talitos_desc), DMA_BIDIRECTIONAL);
+				 sizeof(struct talitos_desc),
+				 DMA_BIDIRECTIONAL);
 
 		/* copy entries so we can call callback outside lock */
 		saved_req.desc = request->desc;
@@ -413,7 +416,8 @@ static struct talitos_desc *current_desc(struct device *dev, int ch)
 /*
  * user diagnostics; report root cause of error based on execution unit status
  */
-static void report_eu_error(struct device *dev, int ch, struct talitos_desc *desc)
+static void report_eu_error(struct device *dev, int ch,
+			    struct talitos_desc *desc)
 {
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	int i;
@@ -684,8 +688,8 @@ struct talitos_ctx {
 	unsigned int authsize;
 };
 
-static int aead_authenc_setauthsize(struct crypto_aead *authenc,
-						 unsigned int authsize)
+static int aead_setauthsize(struct crypto_aead *authenc,
+			    unsigned int authsize)
 {
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 
@@ -694,8 +698,8 @@ static int aead_authenc_setauthsize(struct crypto_aead *authenc,
 	return 0;
 }
 
-static int aead_authenc_setkey(struct crypto_aead *authenc,
-					    const u8 *key, unsigned int keylen)
+static int aead_setkey(struct crypto_aead *authenc,
+		       const u8 *key, unsigned int keylen)
 {
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	struct rtattr *rta = (void *)key;
@@ -740,7 +744,7 @@ badkey:
 }
 
 /*
- * ipsec_esp_edesc - s/w-extended ipsec_esp descriptor
+ * talitos_edesc - s/w-extended descriptor
  * @src_nents: number of segments in input scatterlist
  * @dst_nents: number of segments in output scatterlist
  * @dma_len: length of dma mapped link_tbl space
@@ -752,17 +756,67 @@ badkey:
  * is greater than 1, an integrity check value is concatenated to the end
  * of link_tbl data
  */
-struct ipsec_esp_edesc {
+struct talitos_edesc {
 	int src_nents;
 	int dst_nents;
+	int src_is_chained;
+	int dst_is_chained;
 	int dma_len;
 	dma_addr_t dma_link_tbl;
 	struct talitos_desc desc;
 	struct talitos_ptr link_tbl[0];
 };
 
+static int talitos_map_sg(struct device *dev, struct scatterlist *sg,
+			  unsigned int nents, enum dma_data_direction dir,
+			  int chained)
+{
+	if (unlikely(chained))
+		while (sg) {
+			dma_map_sg(dev, sg, 1, dir);
+			sg = scatterwalk_sg_next(sg);
+		}
+	else
+		dma_map_sg(dev, sg, nents, dir);
+	return nents;
+}
+
+static void talitos_unmap_sg_chain(struct device *dev, struct scatterlist *sg,
+				   enum dma_data_direction dir)
+{
+	while (sg) {
+		dma_unmap_sg(dev, sg, 1, dir);
+		sg = scatterwalk_sg_next(sg);
+	}
+}
+
+static void talitos_sg_unmap(struct device *dev,
+			     struct talitos_edesc *edesc,
+			     struct scatterlist *src,
+			     struct scatterlist *dst)
+{
+	unsigned int src_nents = edesc->src_nents ? : 1;
+	unsigned int dst_nents = edesc->dst_nents ? : 1;
+
+	if (src != dst) {
+		if (edesc->src_is_chained)
+			talitos_unmap_sg_chain(dev, src, DMA_TO_DEVICE);
+		else
+			dma_unmap_sg(dev, src, src_nents, DMA_TO_DEVICE);
+
+		if (edesc->dst_is_chained)
+			talitos_unmap_sg_chain(dev, dst, DMA_FROM_DEVICE);
+		else
+			dma_unmap_sg(dev, dst, dst_nents, DMA_FROM_DEVICE);
+	} else
+		if (edesc->src_is_chained)
+			talitos_unmap_sg_chain(dev, src, DMA_BIDIRECTIONAL);
+		else
+			dma_unmap_sg(dev, src, src_nents, DMA_BIDIRECTIONAL);
+}
+
 static void ipsec_esp_unmap(struct device *dev,
-			    struct ipsec_esp_edesc *edesc,
+			    struct talitos_edesc *edesc,
 			    struct aead_request *areq)
 {
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[6], DMA_FROM_DEVICE);
@@ -772,15 +826,7 @@ static void ipsec_esp_unmap(struct device *dev,
 
 	dma_unmap_sg(dev, areq->assoc, 1, DMA_TO_DEVICE);
 
-	if (areq->src != areq->dst) {
-		dma_unmap_sg(dev, areq->src, edesc->src_nents ? : 1,
-			     DMA_TO_DEVICE);
-		dma_unmap_sg(dev, areq->dst, edesc->dst_nents ? : 1,
-			     DMA_FROM_DEVICE);
-	} else {
-		dma_unmap_sg(dev, areq->src, edesc->src_nents ? : 1,
-			     DMA_BIDIRECTIONAL);
-	}
+	talitos_sg_unmap(dev, edesc, areq->src, areq->dst);
 
 	if (edesc->dma_len)
 		dma_unmap_single(dev, edesc->dma_link_tbl, edesc->dma_len,
@@ -795,13 +841,14 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 				   int err)
 {
 	struct aead_request *areq = context;
-	struct ipsec_esp_edesc *edesc =
-		 container_of(desc, struct ipsec_esp_edesc, desc);
 	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
+	struct talitos_edesc *edesc;
 	struct scatterlist *sg;
 	void *icvdata;
 
+	edesc = container_of(desc, struct talitos_edesc, desc);
+
 	ipsec_esp_unmap(dev, edesc, areq);
 
 	/* copy the generated ICV to dst */
@@ -819,17 +866,18 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 }
 
 static void ipsec_esp_decrypt_swauth_done(struct device *dev,
-				   struct talitos_desc *desc, void *context,
-				   int err)
+					  struct talitos_desc *desc,
+					  void *context, int err)
 {
 	struct aead_request *req = context;
-	struct ipsec_esp_edesc *edesc =
-		 container_of(desc, struct ipsec_esp_edesc, desc);
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
+	struct talitos_edesc *edesc;
 	struct scatterlist *sg;
 	void *icvdata;
 
+	edesc = container_of(desc, struct talitos_edesc, desc);
+
 	ipsec_esp_unmap(dev, edesc, req);
 
 	if (!err) {
@@ -851,20 +899,20 @@ static void ipsec_esp_decrypt_swauth_done(struct device *dev,
 }
 
 static void ipsec_esp_decrypt_hwauth_done(struct device *dev,
-				   struct talitos_desc *desc, void *context,
-				   int err)
+					  struct talitos_desc *desc,
+					  void *context, int err)
 {
 	struct aead_request *req = context;
-	struct ipsec_esp_edesc *edesc =
-		 container_of(desc, struct ipsec_esp_edesc, desc);
+	struct talitos_edesc *edesc;
+
+	edesc = container_of(desc, struct talitos_edesc, desc);
 
 	ipsec_esp_unmap(dev, edesc, req);
 
 	/* check ICV auth status */
-	if (!err)
-		if ((desc->hdr_lo & DESC_HDR_LO_ICCR1_MASK) !=
-		    DESC_HDR_LO_ICCR1_PASS)
-			err = -EBADMSG;
+	if (!err && ((desc->hdr_lo & DESC_HDR_LO_ICCR1_MASK) !=
+		     DESC_HDR_LO_ICCR1_PASS))
+		err = -EBADMSG;
 
 	kfree(edesc);
 
@@ -886,7 +934,7 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 		link_tbl_ptr->j_extent = 0;
 		link_tbl_ptr++;
 		cryptlen -= sg_dma_len(sg);
-		sg = sg_next(sg);
+		sg = scatterwalk_sg_next(sg);
 	}
 
 	/* adjust (decrease) last one (or two) entry's len to cryptlen */
@@ -910,7 +958,7 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 /*
  * fill in and submit ipsec_esp descriptor
  */
-static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
+static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq,
 		     u8 *giv, u64 seq,
 		     void (*callback) (struct device *dev,
 				       struct talitos_desc *desc,
@@ -952,32 +1000,31 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	desc->ptr[4].len = cpu_to_be16(cryptlen);
 	desc->ptr[4].j_extent = authsize;
 
-	if (areq->src == areq->dst)
-		sg_count = dma_map_sg(dev, areq->src, edesc->src_nents ? : 1,
-				      DMA_BIDIRECTIONAL);
-	else
-		sg_count = dma_map_sg(dev, areq->src, edesc->src_nents ? : 1,
-				      DMA_TO_DEVICE);
+	sg_count = talitos_map_sg(dev, areq->src, edesc->src_nents ? : 1,
+				  (areq->src == areq->dst) ? DMA_BIDIRECTIONAL
+							   : DMA_TO_DEVICE,
+				  edesc->src_is_chained);
 
 	if (sg_count == 1) {
 		desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
 	} else {
 		sg_link_tbl_len = cryptlen;
 
-		if ((edesc->desc.hdr & DESC_HDR_MODE1_MDEU_CICV) &&
-			(edesc->desc.hdr & DESC_HDR_MODE0_ENCRYPT) == 0) {
+		if (edesc->desc.hdr & DESC_HDR_MODE1_MDEU_CICV)
 			sg_link_tbl_len = cryptlen + authsize;
-		}
+
 		sg_count = sg_to_link_tbl(areq->src, sg_count, sg_link_tbl_len,
 					  &edesc->link_tbl[0]);
 		if (sg_count > 1) {
 			desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
 			desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
-			dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
-						   edesc->dma_len, DMA_BIDIRECTIONAL);
+			dma_sync_single_for_device(dev, edesc->dma_link_tbl,
+						   edesc->dma_len,
+						   DMA_BIDIRECTIONAL);
 		} else {
 			/* Only one segment now, so no link tbl needed */
-			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
+			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->
+								      src));
 		}
 	}
 
@@ -985,10 +1032,11 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	desc->ptr[5].len = cpu_to_be16(cryptlen);
 	desc->ptr[5].j_extent = authsize;
 
-	if (areq->src != areq->dst) {
-		sg_count = dma_map_sg(dev, areq->dst, edesc->dst_nents ? : 1,
-				      DMA_FROM_DEVICE);
-	}
+	if (areq->src != areq->dst)
+		sg_count = talitos_map_sg(dev, areq->dst,
+					  edesc->dst_nents ? : 1,
+					  DMA_FROM_DEVICE,
+					  edesc->dst_is_chained);
 
 	if (sg_count == 1) {
 		desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
@@ -1033,49 +1081,55 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	return ret;
 }
 
-
 /*
  * derive number of elements in scatterlist
  */
-static int sg_count(struct scatterlist *sg_list, int nbytes)
+static int sg_count(struct scatterlist *sg_list, int nbytes, int *chained)
 {
 	struct scatterlist *sg = sg_list;
 	int sg_nents = 0;
 
-	while (nbytes) {
+	*chained = 0;
+	while (nbytes > 0) {
 		sg_nents++;
 		nbytes -= sg->length;
-		sg = sg_next(sg);
+		if (!sg_is_last(sg) && (sg + 1)->length == 0)
+			*chained = 1;
+		sg = scatterwalk_sg_next(sg);
 	}
 
 	return sg_nents;
 }
 
 /*
- * allocate and map the ipsec_esp extended descriptor
+ * allocate and map the extended descriptor
  */
-static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
-						     int icv_stashing)
+static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
+						 struct scatterlist *src,
+						 struct scatterlist *dst,
+						 unsigned int cryptlen,
+						 unsigned int authsize,
+						 int icv_stashing,
+						 u32 cryptoflags)
 {
-	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
-	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 	int src_nents, dst_nents, alloc_len, dma_len;
-	gfp_t flags = areq->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
+	int src_chained, dst_chained = 0;
+	gfp_t flags = cryptoflags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
 		      GFP_ATOMIC;
 
-	if (areq->cryptlen + ctx->authsize > TALITOS_MAX_DATA_LEN) {
-		dev_err(ctx->dev, "cryptlen exceeds h/w max limit\n");
+	if (cryptlen + authsize > TALITOS_MAX_DATA_LEN) {
+		dev_err(dev, "length exceeds h/w max limit\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	src_nents = sg_count(areq->src, areq->cryptlen + ctx->authsize);
+	src_nents = sg_count(src, cryptlen + authsize, &src_chained);
 	src_nents = (src_nents == 1) ? 0 : src_nents;
 
-	if (areq->dst == areq->src) {
+	if (dst == src) {
 		dst_nents = src_nents;
 	} else {
-		dst_nents = sg_count(areq->dst, areq->cryptlen + ctx->authsize);
+		dst_nents = sg_count(dst, cryptlen + authsize, &dst_chained);
 		dst_nents = (dst_nents == 1) ? 0 : dst_nents;
 	}
 
@@ -1084,39 +1138,52 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 	 * allowing for two separate entries for ICV and generated ICV (+ 2),
 	 * and the ICV data itself
 	 */
-	alloc_len = sizeof(struct ipsec_esp_edesc);
+	alloc_len = sizeof(struct talitos_edesc);
 	if (src_nents || dst_nents) {
 		dma_len = (src_nents + dst_nents + 2) *
-				 sizeof(struct talitos_ptr) + ctx->authsize;
+				 sizeof(struct talitos_ptr) + authsize;
 		alloc_len += dma_len;
 	} else {
 		dma_len = 0;
-		alloc_len += icv_stashing ? ctx->authsize : 0;
+		alloc_len += icv_stashing ? authsize : 0;
 	}
 
 	edesc = kmalloc(alloc_len, GFP_DMA | flags);
 	if (!edesc) {
-		dev_err(ctx->dev, "could not allocate edescriptor\n");
+		dev_err(dev, "could not allocate edescriptor\n");
 		return ERR_PTR(-ENOMEM);
 	}
 
 	edesc->src_nents = src_nents;
 	edesc->dst_nents = dst_nents;
+	edesc->src_is_chained = src_chained;
+	edesc->dst_is_chained = dst_chained;
 	edesc->dma_len = dma_len;
-	edesc->dma_link_tbl = dma_map_single(ctx->dev, &edesc->link_tbl[0],
+	edesc->dma_link_tbl = dma_map_single(dev, &edesc->link_tbl[0],
 					     edesc->dma_len, DMA_BIDIRECTIONAL);
 
 	return edesc;
 }
 
-static int aead_authenc_encrypt(struct aead_request *req)
+static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq,
+					      int icv_stashing)
+{
+	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
+
+	return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst,
+				   areq->cryptlen, ctx->authsize, icv_stashing,
+				   areq->base.flags);
+}
+
+static int aead_encrypt(struct aead_request *req)
 {
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = ipsec_esp_edesc_alloc(req, 0);
+	edesc = aead_edesc_alloc(req, 0);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1126,70 +1193,67 @@ static int aead_authenc_encrypt(struct aead_request *req)
 	return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_encrypt_done);
 }
 
-
-
-static int aead_authenc_decrypt(struct aead_request *req)
+static int aead_decrypt(struct aead_request *req)
 {
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	unsigned int authsize = ctx->authsize;
 	struct talitos_private *priv = dev_get_drvdata(ctx->dev);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 	struct scatterlist *sg;
 	void *icvdata;
 
 	req->cryptlen -= authsize;
 
 	/* allocate extended descriptor */
-	edesc = ipsec_esp_edesc_alloc(req, 1);
+	edesc = aead_edesc_alloc(req, 1);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
 	if ((priv->features & TALITOS_FTR_HW_AUTH_CHECK) &&
-	    (((!edesc->src_nents && !edesc->dst_nents) ||
-		priv->features & TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT))) {
+	    ((!edesc->src_nents && !edesc->dst_nents) ||
+	     priv->features & TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT)) {
 
 		/* decrypt and check the ICV */
-		edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND |
+		edesc->desc.hdr = ctx->desc_hdr_template |
+				  DESC_HDR_DIR_INBOUND |
 				  DESC_HDR_MODE1_MDEU_CICV;
 
 		/* reset integrity check result bits */
 		edesc->desc.hdr_lo = 0;
 
-		return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_decrypt_hwauth_done);
+		return ipsec_esp(edesc, req, NULL, 0,
+				 ipsec_esp_decrypt_hwauth_done);
 
-	} else {
-
-		/* Have to check the ICV with software */
+	}
 
-		edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
+	/* Have to check the ICV with software */
+	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
 
-		/* stash incoming ICV for later cmp with ICV generated by the h/w */
-		if (edesc->dma_len)
-			icvdata = &edesc->link_tbl[edesc->src_nents +
-						   edesc->dst_nents + 2];
-		else
-			icvdata = &edesc->link_tbl[0];
+	/* stash incoming ICV for later cmp with ICV generated by the h/w */
+	if (edesc->dma_len)
+		icvdata = &edesc->link_tbl[edesc->src_nents +
+					   edesc->dst_nents + 2];
+	else
+		icvdata = &edesc->link_tbl[0];
 
-		sg = sg_last(req->src, edesc->src_nents ? : 1);
+	sg = sg_last(req->src, edesc->src_nents ? : 1);
 
-		memcpy(icvdata, (char *)sg_virt(sg) + sg->length - ctx->authsize,
-		       ctx->authsize);
+	memcpy(icvdata, (char *)sg_virt(sg) + sg->length - ctx->authsize,
+	       ctx->authsize);
 
-		return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_decrypt_swauth_done);
-	}
+	return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_decrypt_swauth_done);
 }
 
-static int aead_authenc_givencrypt(
-	struct aead_givcrypt_request *req)
+static int aead_givencrypt(struct aead_givcrypt_request *req)
 {
 	struct aead_request *areq = &req->areq;
 	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = ipsec_esp_edesc_alloc(areq, 0);
+	edesc = aead_edesc_alloc(areq, 0);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1204,31 +1268,228 @@ static int aead_authenc_givencrypt(
 			 ipsec_esp_encrypt_done);
 }
 
+static int ablkcipher_setkey(struct crypto_ablkcipher *cipher,
+			     const u8 *key, unsigned int keylen)
+{
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct ablkcipher_alg *alg = crypto_ablkcipher_alg(cipher);
+
+	if (keylen > TALITOS_MAX_KEY_SIZE)
+		goto badkey;
+
+	if (keylen < alg->min_keysize || keylen > alg->max_keysize)
+		goto badkey;
+
+	memcpy(&ctx->key, key, keylen);
+	ctx->keylen = keylen;
+
+	return 0;
+
+badkey:
+	crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+	return -EINVAL;
+}
+
+static void common_nonsnoop_unmap(struct device *dev,
+				  struct talitos_edesc *edesc,
+				  struct ablkcipher_request *areq)
+{
+	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[5], DMA_FROM_DEVICE);
+	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[2], DMA_TO_DEVICE);
+	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[1], DMA_TO_DEVICE);
+
+	talitos_sg_unmap(dev, edesc, areq->src, areq->dst);
+
+	if (edesc->dma_len)
+		dma_unmap_single(dev, edesc->dma_link_tbl, edesc->dma_len,
+				 DMA_BIDIRECTIONAL);
+}
+
+static void ablkcipher_done(struct device *dev,
+			    struct talitos_desc *desc, void *context,
+			    int err)
+{
+	struct ablkcipher_request *areq = context;
+	struct talitos_edesc *edesc;
+
+	edesc = container_of(desc, struct talitos_edesc, desc);
+
+	common_nonsnoop_unmap(dev, edesc, areq);
+
+	kfree(edesc);
+
+	areq->base.complete(&areq->base, err);
+}
+
+static int common_nonsnoop(struct talitos_edesc *edesc,
+			   struct ablkcipher_request *areq,
+			   u8 *giv,
+			   void (*callback) (struct device *dev,
+					     struct talitos_desc *desc,
+					     void *context, int error))
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct device *dev = ctx->dev;
+	struct talitos_desc *desc = &edesc->desc;
+	unsigned int cryptlen = areq->nbytes;
+	unsigned int ivsize;
+	int sg_count, ret;
+
+	/* first DWORD empty */
+	desc->ptr[0].len = 0;
+	desc->ptr[0].ptr = 0;
+	desc->ptr[0].j_extent = 0;
+
+	/* cipher iv */
+	ivsize = crypto_ablkcipher_ivsize(cipher);
+	map_single_talitos_ptr(dev, &desc->ptr[1], ivsize, giv ?: areq->info, 0,
+			       DMA_TO_DEVICE);
+
+	/* cipher key */
+	map_single_talitos_ptr(dev, &desc->ptr[2], ctx->keylen,
+			       (char *)&ctx->key, 0, DMA_TO_DEVICE);
+
+	/*
+	 * cipher in
+	 */
+	desc->ptr[3].len = cpu_to_be16(cryptlen);
+	desc->ptr[3].j_extent = 0;
+
+	sg_count = talitos_map_sg(dev, areq->src, edesc->src_nents ? : 1,
+				  (areq->src == areq->dst) ? DMA_BIDIRECTIONAL
+							   : DMA_TO_DEVICE,
+				  edesc->src_is_chained);
+
+	if (sg_count == 1) {
+		desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->src));
+	} else {
+		sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
+					  &edesc->link_tbl[0]);
+		if (sg_count > 1) {
+			desc->ptr[3].j_extent |= DESC_PTR_LNKTBL_JUMP;
+			desc->ptr[3].ptr = cpu_to_be32(edesc->dma_link_tbl);
+			dma_sync_single_for_device(dev, edesc->dma_link_tbl,
+						   edesc->dma_len,
+						   DMA_BIDIRECTIONAL);
+		} else {
+			/* Only one segment now, so no link tbl needed */
+			desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->
+								      src));
+		}
+	}
+
+	/* cipher out */
+	desc->ptr[4].len = cpu_to_be16(cryptlen);
+	desc->ptr[4].j_extent = 0;
+
+	if (areq->src != areq->dst)
+		sg_count = talitos_map_sg(dev, areq->dst,
+					  edesc->dst_nents ? : 1,
+					  DMA_FROM_DEVICE,
+					  edesc->dst_is_chained);
+
+	if (sg_count == 1) {
+		desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->dst));
+	} else {
+		struct talitos_ptr *link_tbl_ptr =
+			&edesc->link_tbl[edesc->src_nents + 1];
+
+		desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
+		desc->ptr[4].ptr = cpu_to_be32((struct talitos_ptr *)
+					       edesc->dma_link_tbl +
+					       edesc->src_nents + 1);
+		sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
+					  link_tbl_ptr);
+		dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
+					   edesc->dma_len, DMA_BIDIRECTIONAL);
+	}
+
+	/* iv out */
+	map_single_talitos_ptr(dev, &desc->ptr[5], ivsize, ctx->iv, 0,
+			       DMA_FROM_DEVICE);
+
+	/* last DWORD empty */
+	desc->ptr[6].len = 0;
+	desc->ptr[6].ptr = 0;
+	desc->ptr[6].j_extent = 0;
+
+	ret = talitos_submit(dev, desc, callback, areq);
+	if (ret != -EINPROGRESS) {
+		common_nonsnoop_unmap(dev, edesc, areq);
+		kfree(edesc);
+	}
+	return ret;
+}
+
+static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
+						    areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+
+	return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst, areq->nbytes,
+				   0, 0, areq->base.flags);
+}
+
+static int ablkcipher_encrypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct talitos_edesc *edesc;
+
+	/* allocate extended descriptor */
+	edesc = ablkcipher_edesc_alloc(areq);
+	if (IS_ERR(edesc))
+		return PTR_ERR(edesc);
+
+	/* set encrypt */
+	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
+
+	return common_nonsnoop(edesc, areq, NULL, ablkcipher_done);
+}
+
+static int ablkcipher_decrypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct talitos_edesc *edesc;
+
+	/* allocate extended descriptor */
+	edesc = ablkcipher_edesc_alloc(areq);
+	if (IS_ERR(edesc))
+		return PTR_ERR(edesc);
+
+	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
+
+	return common_nonsnoop(edesc, areq, NULL, ablkcipher_done);
+}
+
 struct talitos_alg_template {
-	char name[CRYPTO_MAX_ALG_NAME];
-	char driver_name[CRYPTO_MAX_ALG_NAME];
-	unsigned int blocksize;
-	struct aead_alg aead;
-	struct device *dev;
+	struct crypto_alg alg;
 	__be32 desc_hdr_template;
 };
 
 static struct talitos_alg_template driver_algs[] = {
-	/* single-pass ipsec_esp descriptor */
+	/* AEAD algorithms.  These use a single-pass ipsec_esp descriptor */
 	{
-		.name = "authenc(hmac(sha1),cbc(aes))",
-		.driver_name = "authenc-hmac-sha1-cbc-aes-talitos",
-		.blocksize = AES_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = AES_BLOCK_SIZE,
-			.maxauthsize = SHA1_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha1),cbc(aes))",
+			.cra_driver_name = "authenc-hmac-sha1-cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = AES_BLOCK_SIZE,
+				.maxauthsize = SHA1_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_AESU |
 		                     DESC_HDR_MODE0_AESU_CBC |
@@ -1238,19 +1499,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA1_HMAC,
 	},
 	{
-		.name = "authenc(hmac(sha1),cbc(des3_ede))",
-		.driver_name = "authenc-hmac-sha1-cbc-3des-talitos",
-		.blocksize = DES3_EDE_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = DES3_EDE_BLOCK_SIZE,
-			.maxauthsize = SHA1_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha1),cbc(des3_ede))",
+			.cra_driver_name = "authenc-hmac-sha1-cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+				.maxauthsize = SHA1_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_DEU |
 		                     DESC_HDR_MODE0_DEU_CBC |
@@ -1261,19 +1526,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA1_HMAC,
 	},
 	{
-		.name = "authenc(hmac(sha256),cbc(aes))",
-		.driver_name = "authenc-hmac-sha256-cbc-aes-talitos",
-		.blocksize = AES_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = AES_BLOCK_SIZE,
-			.maxauthsize = SHA256_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha256),cbc(aes))",
+			.cra_driver_name = "authenc-hmac-sha256-cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = AES_BLOCK_SIZE,
+				.maxauthsize = SHA256_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_AESU |
 		                     DESC_HDR_MODE0_AESU_CBC |
@@ -1283,19 +1552,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA256_HMAC,
 	},
 	{
-		.name = "authenc(hmac(sha256),cbc(des3_ede))",
-		.driver_name = "authenc-hmac-sha256-cbc-3des-talitos",
-		.blocksize = DES3_EDE_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = DES3_EDE_BLOCK_SIZE,
-			.maxauthsize = SHA256_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha256),cbc(des3_ede))",
+			.cra_driver_name = "authenc-hmac-sha256-cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+				.maxauthsize = SHA256_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_DEU |
 		                     DESC_HDR_MODE0_DEU_CBC |
@@ -1306,19 +1579,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA256_HMAC,
 	},
 	{
-		.name = "authenc(hmac(md5),cbc(aes))",
-		.driver_name = "authenc-hmac-md5-cbc-aes-talitos",
-		.blocksize = AES_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = AES_BLOCK_SIZE,
-			.maxauthsize = MD5_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(md5),cbc(aes))",
+			.cra_driver_name = "authenc-hmac-md5-cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = AES_BLOCK_SIZE,
+				.maxauthsize = MD5_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_AESU |
 		                     DESC_HDR_MODE0_AESU_CBC |
@@ -1328,19 +1605,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_MD5_HMAC,
 	},
 	{
-		.name = "authenc(hmac(md5),cbc(des3_ede))",
-		.driver_name = "authenc-hmac-md5-cbc-3des-talitos",
-		.blocksize = DES3_EDE_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = DES3_EDE_BLOCK_SIZE,
-			.maxauthsize = MD5_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(md5),cbc(des3_ede))",
+			.cra_driver_name = "authenc-hmac-md5-cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+				.maxauthsize = MD5_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_DEU |
 		                     DESC_HDR_MODE0_DEU_CBC |
@@ -1349,6 +1630,52 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_INIT |
 		                     DESC_HDR_MODE1_MDEU_PAD |
 		                     DESC_HDR_MODE1_MDEU_MD5_HMAC,
+	},
+	/* ABLKCIPHER algorithms. */
+	{
+		.alg = {
+			.cra_name = "cbc(aes)",
+			.cra_driver_name = "cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+                                     CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_ablkcipher = {
+				.setkey = ablkcipher_setkey,
+				.encrypt = ablkcipher_encrypt,
+				.decrypt = ablkcipher_decrypt,
+				.geniv = "eseqiv",
+				.min_keysize = AES_MIN_KEY_SIZE,
+				.max_keysize = AES_MAX_KEY_SIZE,
+				.ivsize = AES_BLOCK_SIZE,
+			}
+		},
+		.desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
+				     DESC_HDR_SEL0_AESU |
+				     DESC_HDR_MODE0_AESU_CBC,
+	},
+	{
+		.alg = {
+			.cra_name = "cbc(des3_ede)",
+			.cra_driver_name = "cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+                                     CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_ablkcipher = {
+				.setkey = ablkcipher_setkey,
+				.encrypt = ablkcipher_encrypt,
+				.decrypt = ablkcipher_decrypt,
+				.geniv = "eseqiv",
+				.min_keysize = DES3_EDE_KEY_SIZE,
+				.max_keysize = DES3_EDE_KEY_SIZE,
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+			}
+		},
+		.desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
+			             DESC_HDR_SEL0_DEU |
+		                     DESC_HDR_MODE0_DEU_CBC |
+		                     DESC_HDR_MODE0_DEU_3DES,
 	}
 };
 
@@ -1362,12 +1689,14 @@ struct talitos_crypto_alg {
 static int talitos_cra_init(struct crypto_tfm *tfm)
 {
 	struct crypto_alg *alg = tfm->__crt_alg;
-	struct talitos_crypto_alg *talitos_alg =
-		 container_of(alg, struct talitos_crypto_alg, crypto_alg);
+	struct talitos_crypto_alg *talitos_alg;
 	struct talitos_ctx *ctx = crypto_tfm_ctx(tfm);
 
+	talitos_alg =  container_of(alg, struct talitos_crypto_alg, crypto_alg);
+
 	/* update context with ptr to dev */
 	ctx->dev = talitos_alg->dev;
+
 	/* copy descriptor header template value */
 	ctx->desc_hdr_template = talitos_alg->desc_hdr_template;
 
@@ -1453,19 +1782,13 @@ static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev,
 		return ERR_PTR(-ENOMEM);
 
 	alg = &t_alg->crypto_alg;
+	*alg = template->alg;
 
-	snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", template->name);
-	snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
-		 template->driver_name);
 	alg->cra_module = THIS_MODULE;
 	alg->cra_init = talitos_cra_init;
 	alg->cra_priority = TALITOS_CRA_PRIORITY;
-	alg->cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC;
-	alg->cra_blocksize = template->blocksize;
 	alg->cra_alignmask = 0;
-	alg->cra_type = &crypto_aead_type;
 	alg->cra_ctxsize = sizeof(struct talitos_ctx);
-	alg->cra_u.aead = template->aead;
 
 	t_alg->desc_hdr_template = template->desc_hdr_template;
 	t_alg->dev = dev;
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index facfdb1fa71..d205d493a68 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 	struct pci_dev *dev = pvt->dev_d0f1;
 	int enable = 1;
 
-	/* Allow module paramter override, else see if CPU supports parity */
+	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
 	} else if (cpu_id[0] &&
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index edb02530e46..11f373971fa 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -69,7 +69,7 @@ comment "Memory mapped GPIO expanders:"
 
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
-	depends on PPC_OF
+	depends on PPC_OF || MICROBLAZE
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 0411d912d82..80a257554b3 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -371,7 +371,8 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	list->user_token = list->hash.key << PAGE_SHIFT;
 	mutex_unlock(&dev->struct_mutex);
 
-	list->master = dev->primary->master;
+	if (!(map->flags & _DRM_DRIVER))
+		list->master = dev->primary->master;
 	*maplist = list;
 	return 0;
 	}
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 6f6b26479d8..801a0d0e081 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -589,85 +589,13 @@ int drm_do_probe_ddc_edid(struct i2c_adapter *adapter,
 }
 EXPORT_SYMBOL(drm_do_probe_ddc_edid);
 
-/**
- * Get EDID information.
- *
- * \param adapter : i2c device adaptor.
- * \param buf     : EDID data buffer to be filled
- * \param len     : EDID data buffer length
- * \return 0 on success or -1 on failure.
- *
- * Initialize DDC, then fetch EDID information
- * by calling drm_do_probe_ddc_edid function.
- */
-static int drm_ddc_read(struct i2c_adapter *adapter,
-			unsigned char *buf, int len)
-{
-	struct i2c_algo_bit_data *algo_data = adapter->algo_data;
-	int i, j;
-	int ret = -1;
-
-	algo_data->setscl(algo_data->data, 1);
-
-	for (i = 0; i < 1; i++) {
-		/* For some old monitors we need the
-		 * following process to initialize/stop DDC
-		 */
-		algo_data->setsda(algo_data->data, 1);
-		msleep(13);
-
-		algo_data->setscl(algo_data->data, 1);
-		for (j = 0; j < 5; j++) {
-			msleep(10);
-			if (algo_data->getscl(algo_data->data))
-				break;
-		}
-		if (j == 5)
-			continue;
-
-		algo_data->setsda(algo_data->data, 0);
-		msleep(15);
-		algo_data->setscl(algo_data->data, 0);
-		msleep(15);
-		algo_data->setsda(algo_data->data, 1);
-		msleep(15);
-
-		/* Do the real work */
-		ret = drm_do_probe_ddc_edid(adapter, buf, len);
-		algo_data->setsda(algo_data->data, 0);
-		algo_data->setscl(algo_data->data, 0);
-		msleep(15);
-
-		algo_data->setscl(algo_data->data, 1);
-		for (j = 0; j < 10; j++) {
-			msleep(10);
-			if (algo_data->getscl(algo_data->data))
-				break;
-		}
-
-		algo_data->setsda(algo_data->data, 1);
-		msleep(15);
-		algo_data->setscl(algo_data->data, 0);
-		algo_data->setsda(algo_data->data, 0);
-		if (ret == 0)
-			break;
-	}
-	/* Release the DDC lines when done or the Apple Cinema HD display
-	 * will switch off
-	 */
-	algo_data->setsda(algo_data->data, 1);
-	algo_data->setscl(algo_data->data, 1);
-
-	return ret;
-}
-
 static int drm_ddc_read_edid(struct drm_connector *connector,
 			     struct i2c_adapter *adapter,
 			     char *buf, int len)
 {
 	int ret;
 
-	ret = drm_ddc_read(adapter, buf, len);
+	ret = drm_do_probe_ddc_edid(adapter, buf, len);
 	if (ret != 0) {
 		dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
 			 drm_get_connector_name(connector));
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 4984aa89cf3..ec43005100d 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -133,7 +133,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size)
 
 	BUG_ON((size & (PAGE_SIZE - 1)) != 0);
 
-	obj = kcalloc(1, sizeof(*obj), GFP_KERNEL);
+	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
 
 	obj->dev = dev;
 	obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
diff --git a/drivers/gpu/drm/drm_hashtab.c b/drivers/gpu/drm/drm_hashtab.c
index af539f7d87d..ac35145c3e2 100644
--- a/drivers/gpu/drm/drm_hashtab.c
+++ b/drivers/gpu/drm/drm_hashtab.c
@@ -62,6 +62,7 @@ int drm_ht_create(struct drm_open_hash *ht, unsigned int order)
 	}
 	return 0;
 }
+EXPORT_SYMBOL(drm_ht_create);
 
 void drm_ht_verbose_list(struct drm_open_hash *ht, unsigned long key)
 {
@@ -156,6 +157,7 @@ int drm_ht_just_insert_please(struct drm_open_hash *ht, struct drm_hash_item *it
 	}
 	return 0;
 }
+EXPORT_SYMBOL(drm_ht_just_insert_please);
 
 int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key,
 		     struct drm_hash_item **item)
@@ -169,6 +171,7 @@ int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key,
 	*item = hlist_entry(list, struct drm_hash_item, head);
 	return 0;
 }
+EXPORT_SYMBOL(drm_ht_find_item);
 
 int drm_ht_remove_key(struct drm_open_hash *ht, unsigned long key)
 {
@@ -202,3 +205,4 @@ void drm_ht_remove(struct drm_open_hash *ht)
 		ht->table = NULL;
 	}
 }
+EXPORT_SYMBOL(drm_ht_remove);
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 367c590ffbb..7819fd930a5 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -42,8 +42,11 @@
  */
 
 #include "drmP.h"
+#include "drm_mm.h"
 #include <linux/slab.h>
 
+#define MM_UNUSED_TARGET 4
+
 unsigned long drm_mm_tail_space(struct drm_mm *mm)
 {
 	struct list_head *tail_node;
@@ -74,16 +77,62 @@ int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size)
 	return 0;
 }
 
+static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic)
+{
+	struct drm_mm_node *child;
+
+	if (atomic)
+		child = kmalloc(sizeof(*child), GFP_ATOMIC);
+	else
+		child = kmalloc(sizeof(*child), GFP_KERNEL);
+
+	if (unlikely(child == NULL)) {
+		spin_lock(&mm->unused_lock);
+		if (list_empty(&mm->unused_nodes))
+			child = NULL;
+		else {
+			child =
+			    list_entry(mm->unused_nodes.next,
+				       struct drm_mm_node, fl_entry);
+			list_del(&child->fl_entry);
+			--mm->num_unused;
+		}
+		spin_unlock(&mm->unused_lock);
+	}
+	return child;
+}
+
+int drm_mm_pre_get(struct drm_mm *mm)
+{
+	struct drm_mm_node *node;
+
+	spin_lock(&mm->unused_lock);
+	while (mm->num_unused < MM_UNUSED_TARGET) {
+		spin_unlock(&mm->unused_lock);
+		node = kmalloc(sizeof(*node), GFP_KERNEL);
+		spin_lock(&mm->unused_lock);
+
+		if (unlikely(node == NULL)) {
+			int ret = (mm->num_unused < 2) ? -ENOMEM : 0;
+			spin_unlock(&mm->unused_lock);
+			return ret;
+		}
+		++mm->num_unused;
+		list_add_tail(&node->fl_entry, &mm->unused_nodes);
+	}
+	spin_unlock(&mm->unused_lock);
+	return 0;
+}
+EXPORT_SYMBOL(drm_mm_pre_get);
 
 static int drm_mm_create_tail_node(struct drm_mm *mm,
-			    unsigned long start,
-			    unsigned long size)
+				   unsigned long start,
+				   unsigned long size, int atomic)
 {
 	struct drm_mm_node *child;
 
-	child = (struct drm_mm_node *)
-		drm_alloc(sizeof(*child), DRM_MEM_MM);
-	if (!child)
+	child = drm_mm_kmalloc(mm, atomic);
+	if (unlikely(child == NULL))
 		return -ENOMEM;
 
 	child->free = 1;
@@ -97,8 +146,7 @@ static int drm_mm_create_tail_node(struct drm_mm *mm,
 	return 0;
 }
 
-
-int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size)
+int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size, int atomic)
 {
 	struct list_head *tail_node;
 	struct drm_mm_node *entry;
@@ -106,20 +154,21 @@ int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size)
 	tail_node = mm->ml_entry.prev;
 	entry = list_entry(tail_node, struct drm_mm_node, ml_entry);
 	if (!entry->free) {
-		return drm_mm_create_tail_node(mm, entry->start + entry->size, size);
+		return drm_mm_create_tail_node(mm, entry->start + entry->size,
+					       size, atomic);
 	}
 	entry->size += size;
 	return 0;
 }
 
 static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent,
-					    unsigned long size)
+						 unsigned long size,
+						 int atomic)
 {
 	struct drm_mm_node *child;
 
-	child = (struct drm_mm_node *)
-		drm_alloc(sizeof(*child), DRM_MEM_MM);
-	if (!child)
+	child = drm_mm_kmalloc(parent->mm, atomic);
+	if (unlikely(child == NULL))
 		return NULL;
 
 	INIT_LIST_HEAD(&child->fl_entry);
@@ -151,8 +200,9 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
 		tmp = parent->start % alignment;
 
 	if (tmp) {
-		align_splitoff = drm_mm_split_at_start(parent, alignment - tmp);
-		if (!align_splitoff)
+		align_splitoff =
+		    drm_mm_split_at_start(parent, alignment - tmp, 0);
+		if (unlikely(align_splitoff == NULL))
 			return NULL;
 	}
 
@@ -161,7 +211,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
 		parent->free = 0;
 		return parent;
 	} else {
-		child = drm_mm_split_at_start(parent, size);
+		child = drm_mm_split_at_start(parent, size, 0);
 	}
 
 	if (align_splitoff)
@@ -169,14 +219,49 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
 
 	return child;
 }
+
 EXPORT_SYMBOL(drm_mm_get_block);
 
+struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+					    unsigned long size,
+					    unsigned alignment)
+{
+
+	struct drm_mm_node *align_splitoff = NULL;
+	struct drm_mm_node *child;
+	unsigned tmp = 0;
+
+	if (alignment)
+		tmp = parent->start % alignment;
+
+	if (tmp) {
+		align_splitoff =
+		    drm_mm_split_at_start(parent, alignment - tmp, 1);
+		if (unlikely(align_splitoff == NULL))
+			return NULL;
+	}
+
+	if (parent->size == size) {
+		list_del_init(&parent->fl_entry);
+		parent->free = 0;
+		return parent;
+	} else {
+		child = drm_mm_split_at_start(parent, size, 1);
+	}
+
+	if (align_splitoff)
+		drm_mm_put_block(align_splitoff);
+
+	return child;
+}
+EXPORT_SYMBOL(drm_mm_get_block_atomic);
+
 /*
  * Put a block. Merge with the previous and / or next block if they are free.
  * Otherwise add to the free stack.
  */
 
-void drm_mm_put_block(struct drm_mm_node * cur)
+void drm_mm_put_block(struct drm_mm_node *cur)
 {
 
 	struct drm_mm *mm = cur->mm;
@@ -188,21 +273,27 @@ void drm_mm_put_block(struct drm_mm_node * cur)
 	int merged = 0;
 
 	if (cur_head->prev != root_head) {
-		prev_node = list_entry(cur_head->prev, struct drm_mm_node, ml_entry);
+		prev_node =
+		    list_entry(cur_head->prev, struct drm_mm_node, ml_entry);
 		if (prev_node->free) {
 			prev_node->size += cur->size;
 			merged = 1;
 		}
 	}
 	if (cur_head->next != root_head) {
-		next_node = list_entry(cur_head->next, struct drm_mm_node, ml_entry);
+		next_node =
+		    list_entry(cur_head->next, struct drm_mm_node, ml_entry);
 		if (next_node->free) {
 			if (merged) {
 				prev_node->size += next_node->size;
 				list_del(&next_node->ml_entry);
 				list_del(&next_node->fl_entry);
-				drm_free(next_node, sizeof(*next_node),
-					 DRM_MEM_MM);
+				if (mm->num_unused < MM_UNUSED_TARGET) {
+					list_add(&next_node->fl_entry,
+						 &mm->unused_nodes);
+					++mm->num_unused;
+				} else
+					kfree(next_node);
 			} else {
 				next_node->size += cur->size;
 				next_node->start = cur->start;
@@ -215,14 +306,19 @@ void drm_mm_put_block(struct drm_mm_node * cur)
 		list_add(&cur->fl_entry, &mm->fl_entry);
 	} else {
 		list_del(&cur->ml_entry);
-		drm_free(cur, sizeof(*cur), DRM_MEM_MM);
+		if (mm->num_unused < MM_UNUSED_TARGET) {
+			list_add(&cur->fl_entry, &mm->unused_nodes);
+			++mm->num_unused;
+		} else
+			kfree(cur);
 	}
 }
+
 EXPORT_SYMBOL(drm_mm_put_block);
 
-struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm,
-				  unsigned long size,
-				  unsigned alignment, int best_match)
+struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
+				       unsigned long size,
+				       unsigned alignment, int best_match)
 {
 	struct list_head *list;
 	const struct list_head *free_stack = &mm->fl_entry;
@@ -247,7 +343,6 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm,
 				wasted += alignment - tmp;
 		}
 
-
 		if (entry->size >= size + wasted) {
 			if (!best_match)
 				return entry;
@@ -260,6 +355,7 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm,
 
 	return best;
 }
+EXPORT_SYMBOL(drm_mm_search_free);
 
 int drm_mm_clean(struct drm_mm * mm)
 {
@@ -267,14 +363,17 @@ int drm_mm_clean(struct drm_mm * mm)
 
 	return (head->next->next == head);
 }
-EXPORT_SYMBOL(drm_mm_search_free);
+EXPORT_SYMBOL(drm_mm_clean);
 
 int drm_mm_init(struct drm_mm * mm, unsigned long start, unsigned long size)
 {
 	INIT_LIST_HEAD(&mm->ml_entry);
 	INIT_LIST_HEAD(&mm->fl_entry);
+	INIT_LIST_HEAD(&mm->unused_nodes);
+	mm->num_unused = 0;
+	spin_lock_init(&mm->unused_lock);
 
-	return drm_mm_create_tail_node(mm, start, size);
+	return drm_mm_create_tail_node(mm, start, size, 0);
 }
 EXPORT_SYMBOL(drm_mm_init);
 
@@ -282,6 +381,7 @@ void drm_mm_takedown(struct drm_mm * mm)
 {
 	struct list_head *bnode = mm->fl_entry.next;
 	struct drm_mm_node *entry;
+	struct drm_mm_node *next;
 
 	entry = list_entry(bnode, struct drm_mm_node, fl_entry);
 
@@ -293,7 +393,16 @@ void drm_mm_takedown(struct drm_mm * mm)
 
 	list_del(&entry->fl_entry);
 	list_del(&entry->ml_entry);
+	kfree(entry);
+
+	spin_lock(&mm->unused_lock);
+	list_for_each_entry_safe(entry, next, &mm->unused_nodes, fl_entry) {
+		list_del(&entry->fl_entry);
+		kfree(entry);
+		--mm->num_unused;
+	}
+	spin_unlock(&mm->unused_lock);
 
-	drm_free(entry, sizeof(*entry), DRM_MEM_MM);
+	BUG_ON(mm->num_unused != 0);
 }
 EXPORT_SYMBOL(drm_mm_takedown);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c9b80fdd463..54f492a488a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -38,6 +38,7 @@
 #include "drm.h"
 #include "drm_crtc.h"
 
+#define DRM_MODESET_DEBUG	"drm_mode"
 /**
  * drm_mode_debug_printmodeline - debug print a mode
  * @dev: DRM device
@@ -50,12 +51,13 @@
  */
 void drm_mode_debug_printmodeline(struct drm_display_mode *mode)
 {
-	DRM_DEBUG("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
-		  mode->base.id, mode->name, mode->vrefresh, mode->clock,
-		  mode->hdisplay, mode->hsync_start,
-		  mode->hsync_end, mode->htotal,
-		  mode->vdisplay, mode->vsync_start,
-		  mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+	DRM_DEBUG_MODE(DRM_MODESET_DEBUG,
+		"Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+		mode->base.id, mode->name, mode->vrefresh, mode->clock,
+		mode->hdisplay, mode->hsync_start,
+		mode->hsync_end, mode->htotal,
+		mode->vdisplay, mode->vsync_start,
+		mode->vsync_end, mode->vtotal, mode->type, mode->flags);
 }
 EXPORT_SYMBOL(drm_mode_debug_printmodeline);
 
@@ -401,7 +403,9 @@ void drm_mode_prune_invalid(struct drm_device *dev,
 			list_del(&mode->head);
 			if (verbose) {
 				drm_mode_debug_printmodeline(mode);
-				DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status);
+				DRM_DEBUG_MODE(DRM_MODESET_DEBUG,
+					"Not using %s mode %d\n",
+					mode->name, mode->status);
 			}
 			drm_mode_destroy(dev, mode);
 		}
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index b9631e3a1ea..89050684fe0 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -51,7 +51,22 @@ struct idr drm_minors_idr;
 struct class *drm_class;
 struct proc_dir_entry *drm_proc_root;
 struct dentry *drm_debugfs_root;
-
+void drm_ut_debug_printk(unsigned int request_level,
+			 const char *prefix,
+			 const char *function_name,
+			 const char *format, ...)
+{
+	va_list args;
+
+	if (drm_debug & request_level) {
+		if (function_name)
+			printk(KERN_DEBUG "[%s:%s], ", prefix, function_name);
+		va_start(args, format);
+		vprintk(format, args);
+		va_end(args);
+	}
+}
+EXPORT_SYMBOL(drm_ut_debug_printk);
 static int drm_minor_get_id(struct drm_device *dev, int type)
 {
 	int new_id;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0ccb63ee50e..1a60626f680 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -33,6 +33,8 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+#define I915_DRV	"i915_drv"
+
 /* Really want an OS-independent resettable timer.  Would like to have
  * this loop run for (eg) 3 sec, but have the timer reset every time
  * the head pointer changes, so that EBUSY only happens if the ring
@@ -99,7 +101,7 @@ static int i915_init_phys_hws(struct drm_device *dev)
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
 
 	I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
-	DRM_DEBUG("Enabled hardware status page\n");
+	DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n");
 	return 0;
 }
 
@@ -185,7 +187,8 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 		master_priv->sarea_priv = (drm_i915_sarea_t *)
 			((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
 	} else {
-		DRM_DEBUG("sarea not found assuming DRI2 userspace\n");
+		DRM_DEBUG_DRIVER(I915_DRV,
+				"sarea not found assuming DRI2 userspace\n");
 	}
 
 	if (init->ring_size != 0) {
@@ -235,7 +238,7 @@ static int i915_dma_resume(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
-	DRM_DEBUG("%s\n", __func__);
+	DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__);
 
 	if (dev_priv->ring.map.handle == NULL) {
 		DRM_ERROR("can not ioremap virtual address for"
@@ -248,13 +251,14 @@ static int i915_dma_resume(struct drm_device * dev)
 		DRM_ERROR("Can not find hardware status page\n");
 		return -EINVAL;
 	}
-	DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page);
+	DRM_DEBUG_DRIVER(I915_DRV, "hw status page @ %p\n",
+				dev_priv->hw_status_page);
 
 	if (dev_priv->status_gfx_addr != 0)
 		I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
 	else
 		I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
-	DRM_DEBUG("Enabled hardware status page\n");
+	DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n");
 
 	return 0;
 }
@@ -548,10 +552,10 @@ static int i915_dispatch_flip(struct drm_device * dev)
 	if (!master_priv->sarea_priv)
 		return -EINVAL;
 
-	DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n",
-		  __func__,
-		  dev_priv->current_page,
-		  master_priv->sarea_priv->pf_current_page);
+	DRM_DEBUG_DRIVER(I915_DRV, "%s: page=%d pfCurrentPage=%d\n",
+			  __func__,
+			 dev_priv->current_page,
+			 master_priv->sarea_priv->pf_current_page);
 
 	i915_kernel_lost_context(dev);
 
@@ -629,8 +633,9 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	DRM_DEBUG("i915 batchbuffer, start %x used %d cliprects %d\n",
-		  batch->start, batch->used, batch->num_cliprects);
+	DRM_DEBUG_DRIVER(I915_DRV,
+			"i915 batchbuffer, start %x used %d cliprects %d\n",
+			batch->start, batch->used, batch->num_cliprects);
 
 	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 
@@ -678,8 +683,9 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
 	void *batch_data;
 	int ret;
 
-	DRM_DEBUG("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
-		  cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
+	DRM_DEBUG_DRIVER(I915_DRV,
+			"i915 cmdbuffer, buf %p sz %d cliprects %d\n",
+			cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
 
 	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 
@@ -734,7 +740,7 @@ static int i915_flip_bufs(struct drm_device *dev, void *data,
 {
 	int ret;
 
-	DRM_DEBUG("%s\n", __func__);
+	DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__);
 
 	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 
@@ -777,7 +783,8 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
 		break;
 	default:
-		DRM_DEBUG("Unknown parameter %d\n", param->param);
+		DRM_DEBUG_DRIVER(I915_DRV, "Unknown parameter %d\n",
+					param->param);
 		return -EINVAL;
 	}
 
@@ -817,7 +824,8 @@ static int i915_setparam(struct drm_device *dev, void *data,
 		dev_priv->fence_reg_start = param->value;
 		break;
 	default:
-		DRM_DEBUG("unknown parameter %d\n", param->param);
+		DRM_DEBUG_DRIVER(I915_DRV, "unknown parameter %d\n",
+					param->param);
 		return -EINVAL;
 	}
 
@@ -865,9 +873,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
 	I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
-	DRM_DEBUG("load hws HWS_PGA with gfx mem 0x%x\n",
-			dev_priv->status_gfx_addr);
-	DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page);
+	DRM_DEBUG_DRIVER(I915_DRV, "load hws HWS_PGA with gfx mem 0x%x\n",
+				dev_priv->status_gfx_addr);
+	DRM_DEBUG_DRIVER(I915_DRV, "load hws at %p\n",
+				dev_priv->hw_status_page);
 	return 0;
 }
 
@@ -922,7 +931,7 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
 	 * Some of the preallocated space is taken by the GTT
 	 * and popup.  GTT is 1K per MB of aperture size, and popup is 4K.
 	 */
-	if (IS_G4X(dev) || IS_IGD(dev))
+	if (IS_G4X(dev) || IS_IGD(dev) || IS_IGDNG(dev))
 		overhead = 4096;
 	else
 		overhead = (*aperture_size / 1024) + 4096;
@@ -1153,8 +1162,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 #endif
 
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
-	if (IS_GM45(dev))
+	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_G4X(dev) || IS_IGDNG(dev)) {
+		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
 		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+	}
 
 	i915_gem_load(dev);
 
@@ -1198,7 +1210,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	}
 
 	/* Must be done after probing outputs */
-	intel_opregion_init(dev, 0);
+	/* FIXME: verify on IGDNG */
+	if (!IS_IGDNG(dev))
+		intel_opregion_init(dev, 0);
 
 	return 0;
 
@@ -1232,7 +1246,8 @@ int i915_driver_unload(struct drm_device *dev)
 	if (dev_priv->regs != NULL)
 		iounmap(dev_priv->regs);
 
-	intel_opregion_free(dev, 0);
+	if (!IS_IGDNG(dev))
+		intel_opregion_free(dev, 0);
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		intel_modeset_cleanup(dev);
@@ -1256,7 +1271,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_i915_file_private *i915_file_priv;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_DRIVER(I915_DRV, "\n");
 	i915_file_priv = (struct drm_i915_file_private *)
 	    drm_alloc(sizeof(*i915_file_priv), DRM_MEM_FILES);
 
@@ -1265,8 +1280,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 
 	file_priv->driver_priv = i915_file_priv;
 
-	i915_file_priv->mm.last_gem_seqno = 0;
-	i915_file_priv->mm.last_gem_throttle_seqno = 0;
+	INIT_LIST_HEAD(&i915_file_priv->mm.request_list);
 
 	return 0;
 }
@@ -1303,6 +1317,7 @@ void i915_driver_lastclose(struct drm_device * dev)
 void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	i915_gem_release(dev, file_priv);
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		i915_mem_release(dev, file_priv, dev_priv->agp_heap);
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c431fa54bbb..8ef6bcec211 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -126,6 +126,13 @@ struct drm_i915_fence_reg {
 	struct drm_gem_object *obj;
 };
 
+struct sdvo_device_mapping {
+	u8 dvo_port;
+	u8 slave_addr;
+	u8 dvo_wiring;
+	u8 initialized;
+};
+
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
@@ -143,6 +150,8 @@ typedef struct drm_i915_private {
 	drm_local_map_t hws_map;
 	struct drm_gem_object *hws_obj;
 
+	struct resource mch_res;
+
 	unsigned int cpp;
 	int back_offset;
 	int front_offset;
@@ -158,6 +167,11 @@ typedef struct drm_i915_private {
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 irq_mask_reg;
 	u32 pipestat[2];
+	/** splitted irq regs for graphics and display engine on IGDNG,
+	    irq_mask_reg is still used for display irq. */
+	u32 gt_irq_mask_reg;
+	u32 gt_irq_enable_reg;
+	u32 de_irq_enable_reg;
 
 	u32 hotplug_supported_mask;
 	struct work_struct hotplug_work;
@@ -285,6 +299,13 @@ typedef struct drm_i915_private {
 	u8 saveDACMASK;
 	u8 saveCR[37];
 	uint64_t saveFENCE[16];
+	u32 saveCURACNTR;
+	u32 saveCURAPOS;
+	u32 saveCURABASE;
+	u32 saveCURBCNTR;
+	u32 saveCURBPOS;
+	u32 saveCURBBASE;
+	u32 saveCURSIZE;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -382,6 +403,7 @@ typedef struct drm_i915_private {
 		/* storage for physical objects */
 		struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
 	} mm;
+	struct sdvo_device_mapping sdvo_mappings[2];
 } drm_i915_private_t;
 
 /** driver private structure attached to each drm_gem_object */
@@ -491,13 +513,16 @@ struct drm_i915_gem_request {
 	/** Time at which this request was emitted, in jiffies. */
 	unsigned long emitted_jiffies;
 
+	/** global list entry for this request */
 	struct list_head list;
+
+	/** file_priv list entry for this request */
+	struct list_head client_list;
 };
 
 struct drm_i915_file_private {
 	struct {
-		uint32_t last_gem_seqno;
-		uint32_t last_gem_throttle_seqno;
+		struct list_head request_list;
 	} mm;
 };
 
@@ -642,6 +667,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev,
 void i915_gem_free_all_phys_object(struct drm_device *dev);
 int i915_gem_object_get_pages(struct drm_gem_object *obj);
 void i915_gem_object_put_pages(struct drm_gem_object *obj);
+void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
@@ -785,7 +811,9 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x2E02 || \
 		       (dev)->pci_device == 0x2E12 || \
 		       (dev)->pci_device == 0x2E22 || \
-		       (dev)->pci_device == 0x2E32)
+		       (dev)->pci_device == 0x2E32 || \
+		       (dev)->pci_device == 0x0042 || \
+		       (dev)->pci_device == 0x0046)
 
 #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
 			(dev)->pci_device == 0x2A12)
@@ -807,20 +835,26 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 			(dev)->pci_device == 0x29D2 ||  \
 			(IS_IGD(dev)))
 
+#define IS_IGDNG_D(dev)	((dev)->pci_device == 0x0042)
+#define IS_IGDNG_M(dev)	((dev)->pci_device == 0x0046)
+#define IS_IGDNG(dev)	(IS_IGDNG_D(dev) || IS_IGDNG_M(dev))
+
 #define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
-		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev))
+		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
+		      IS_IGDNG(dev))
 
 #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
 			IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
-			IS_IGD(dev))
+			IS_IGD(dev) || IS_IGDNG_M(dev))
 
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
+				IS_IGDNG(dev))
 /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
  * rows, which changed the alignment requirements and fence programming.
  */
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
-#define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev))
+#define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 39f5c658ef5..c0ae6bbbd9b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -989,10 +989,10 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 		return -ENODEV;
 
 	/* Only handle setting domains to types used by the CPU. */
-	if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+	if (write_domain & I915_GEM_GPU_DOMAINS)
 		return -EINVAL;
 
-	if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+	if (read_domains & I915_GEM_GPU_DOMAINS)
 		return -EINVAL;
 
 	/* Having something in the write domain implies it's in the read
@@ -1481,14 +1481,19 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
  * Returned sequence numbers are nonzero on success.
  */
 static uint32_t
-i915_add_request(struct drm_device *dev, uint32_t flush_domains)
+i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
+		 uint32_t flush_domains)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_file_private *i915_file_priv = NULL;
 	struct drm_i915_gem_request *request;
 	uint32_t seqno;
 	int was_empty;
 	RING_LOCALS;
 
+	if (file_priv != NULL)
+		i915_file_priv = file_priv->driver_priv;
+
 	request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER);
 	if (request == NULL)
 		return 0;
@@ -1515,6 +1520,12 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains)
 	request->emitted_jiffies = jiffies;
 	was_empty = list_empty(&dev_priv->mm.request_list);
 	list_add_tail(&request->list, &dev_priv->mm.request_list);
+	if (i915_file_priv) {
+		list_add_tail(&request->client_list,
+			      &i915_file_priv->mm.request_list);
+	} else {
+		INIT_LIST_HEAD(&request->client_list);
+	}
 
 	/* Associate any objects on the flushing list matching the write
 	 * domain we're flushing with our flush.
@@ -1664,6 +1675,7 @@ i915_gem_retire_requests(struct drm_device *dev)
 			i915_gem_retire_request(dev, request);
 
 			list_del(&request->list);
+			list_del(&request->client_list);
 			drm_free(request, sizeof(*request), DRM_MEM_DRIVER);
 		} else
 			break;
@@ -1702,7 +1714,10 @@ i915_wait_request(struct drm_device *dev, uint32_t seqno)
 	BUG_ON(seqno == 0);
 
 	if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
-		ier = I915_READ(IER);
+		if (IS_IGDNG(dev))
+			ier = I915_READ(DEIER) | I915_READ(GTIER);
+		else
+			ier = I915_READ(IER);
 		if (!ier) {
 			DRM_ERROR("something (likely vbetool) disabled "
 				  "interrupts, re-enabling\n");
@@ -1754,8 +1769,7 @@ i915_gem_flush(struct drm_device *dev,
 	if (flush_domains & I915_GEM_DOMAIN_CPU)
 		drm_agp_chipset_flush(dev);
 
-	if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU |
-						     I915_GEM_DOMAIN_GTT)) {
+	if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) {
 		/*
 		 * read/write caches:
 		 *
@@ -1977,7 +1991,7 @@ i915_gem_evict_something(struct drm_device *dev)
 			i915_gem_flush(dev,
 				       obj->write_domain,
 				       obj->write_domain);
-			i915_add_request(dev, obj->write_domain);
+			i915_add_request(dev, NULL, obj->write_domain);
 
 			obj = NULL;
 			continue;
@@ -1991,7 +2005,7 @@ i915_gem_evict_something(struct drm_device *dev)
 		/* If we didn't do any of the above, there's nothing to be done
 		 * and we just can't fit it in.
 		 */
-		return -ENOMEM;
+		return -ENOSPC;
 	}
 	return ret;
 }
@@ -2006,7 +2020,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 		if (ret != 0)
 			break;
 	}
-	if (ret == -ENOMEM)
+	if (ret == -ENOSPC)
 		return 0;
 	return ret;
 }
@@ -2215,7 +2229,7 @@ try_again:
 		loff_t offset;
 
 		if (avail == 0)
-			return -ENOMEM;
+			return -ENOSPC;
 
 		for (i = dev_priv->fence_reg_start;
 		     i < dev_priv->num_fence_regs; i++) {
@@ -2248,7 +2262,7 @@ try_again:
 				i915_gem_flush(dev,
 					       I915_GEM_GPU_DOMAINS,
 					       I915_GEM_GPU_DOMAINS);
-				seqno = i915_add_request(dev,
+				seqno = i915_add_request(dev, NULL,
 							 I915_GEM_GPU_DOMAINS);
 				if (seqno == 0)
 					return -ENOMEM;
@@ -2364,7 +2378,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 		spin_unlock(&dev_priv->mm.active_list_lock);
 		if (lists_empty) {
 			DRM_ERROR("GTT full, but LRU list empty\n");
-			return -ENOMEM;
+			return -ENOSPC;
 		}
 
 		ret = i915_gem_evict_something(dev);
@@ -2409,8 +2423,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 	 * wasn't in the GTT, there shouldn't be any way it could have been in
 	 * a GPU cache
 	 */
-	BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
-	BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
+	BUG_ON(obj->read_domains & I915_GEM_GPU_DOMAINS);
+	BUG_ON(obj->write_domain & I915_GEM_GPU_DOMAINS);
 
 	return 0;
 }
@@ -2452,7 +2466,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 
 	/* Queue the GPU write cache flushing we need. */
 	i915_gem_flush(dev, 0, obj->write_domain);
-	seqno = i915_add_request(dev, obj->write_domain);
+	seqno = i915_add_request(dev, NULL, obj->write_domain);
 	obj->write_domain = 0;
 	i915_gem_object_move_to_active(obj, seqno);
 }
@@ -3035,20 +3049,12 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev,
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	int nbox = exec->num_cliprects;
 	int i = 0, count;
-	uint32_t	exec_start, exec_len;
+	uint32_t exec_start, exec_len;
 	RING_LOCALS;
 
 	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
 	exec_len = (uint32_t) exec->batch_len;
 
-	if ((exec_start | exec_len) & 0x7) {
-		DRM_ERROR("alignment\n");
-		return -EINVAL;
-	}
-
-	if (!exec_start)
-		return -EINVAL;
-
 	count = nbox ? nbox : 1;
 
 	for (i = 0; i < count; i++) {
@@ -3089,6 +3095,10 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev,
 /* Throttle our rendering by waiting until the ring has completed our requests
  * emitted over 20 msec ago.
  *
+ * Note that if we were to use the current jiffies each time around the loop,
+ * we wouldn't escape the function with any frames outstanding if the time to
+ * render a frame was over 20ms.
+ *
  * This should get us reasonable parallelism between CPU and GPU but also
  * relatively low latency when blocking on a particular request to finish.
  */
@@ -3097,15 +3107,25 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
 	int ret = 0;
-	uint32_t seqno;
+	unsigned long recent_enough = jiffies - msecs_to_jiffies(20);
 
 	mutex_lock(&dev->struct_mutex);
-	seqno = i915_file_priv->mm.last_gem_throttle_seqno;
-	i915_file_priv->mm.last_gem_throttle_seqno =
-		i915_file_priv->mm.last_gem_seqno;
-	if (seqno)
-		ret = i915_wait_request(dev, seqno);
+	while (!list_empty(&i915_file_priv->mm.request_list)) {
+		struct drm_i915_gem_request *request;
+
+		request = list_first_entry(&i915_file_priv->mm.request_list,
+					   struct drm_i915_gem_request,
+					   client_list);
+
+		if (time_after_eq(request->emitted_jiffies, recent_enough))
+			break;
+
+		ret = i915_wait_request(dev, request->seqno);
+		if (ret != 0)
+			break;
+	}
 	mutex_unlock(&dev->struct_mutex);
+
 	return ret;
 }
 
@@ -3182,12 +3202,29 @@ err:
 	return ret;
 }
 
+static int
+i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec,
+			   uint64_t exec_offset)
+{
+	uint32_t exec_start, exec_len;
+
+	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+	exec_len = (uint32_t) exec->batch_len;
+
+	if ((exec_start | exec_len) & 0x7)
+		return -EINVAL;
+
+	if (!exec_start)
+		return -EINVAL;
+
+	return 0;
+}
+
 int
 i915_gem_execbuffer(struct drm_device *dev, void *data,
 		    struct drm_file *file_priv)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
 	struct drm_i915_gem_execbuffer *args = data;
 	struct drm_i915_gem_exec_object *exec_list = NULL;
 	struct drm_gem_object **object_list = NULL;
@@ -3312,7 +3349,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			break;
 
 		/* error other than GTT full, or we've already tried again */
-		if (ret != -ENOMEM || pin_tries >= 1) {
+		if (ret != -ENOSPC || pin_tries >= 1) {
 			if (ret != -ERESTARTSYS)
 				DRM_ERROR("Failed to pin buffers %d\n", ret);
 			goto err;
@@ -3331,8 +3368,20 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 
 	/* Set the pending read domains for the batch buffer to COMMAND */
 	batch_obj = object_list[args->buffer_count-1];
-	batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND;
-	batch_obj->pending_write_domain = 0;
+	if (batch_obj->pending_write_domain) {
+		DRM_ERROR("Attempting to use self-modifying batch buffer\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	batch_obj->pending_read_domains |= I915_GEM_DOMAIN_COMMAND;
+
+	/* Sanity check the batch buffer, prior to moving objects */
+	exec_offset = exec_list[args->buffer_count - 1].offset;
+	ret = i915_gem_check_execbuffer (args, exec_offset);
+	if (ret != 0) {
+		DRM_ERROR("execbuf with invalid offset/length\n");
+		goto err;
+	}
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
@@ -3363,7 +3412,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			       dev->invalidate_domains,
 			       dev->flush_domains);
 		if (dev->flush_domains)
-			(void)i915_add_request(dev, dev->flush_domains);
+			(void)i915_add_request(dev, file_priv,
+					       dev->flush_domains);
 	}
 
 	for (i = 0; i < args->buffer_count; i++) {
@@ -3381,8 +3431,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	}
 #endif
 
-	exec_offset = exec_list[args->buffer_count - 1].offset;
-
 #if WATCH_EXEC
 	i915_gem_dump_object(batch_obj,
 			      args->batch_len,
@@ -3412,9 +3460,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	 * *some* interrupts representing completion of buffers that we can
 	 * wait on when trying to clear up gtt space).
 	 */
-	seqno = i915_add_request(dev, flush_domains);
+	seqno = i915_add_request(dev, file_priv, flush_domains);
 	BUG_ON(seqno == 0);
-	i915_file_priv->mm.last_gem_seqno = seqno;
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
 
@@ -3520,8 +3567,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 		atomic_inc(&dev->pin_count);
 		atomic_add(obj->size, &dev->pin_memory);
 		if (!obj_priv->active &&
-		    (obj->write_domain & ~(I915_GEM_DOMAIN_CPU |
-					   I915_GEM_DOMAIN_GTT)) == 0 &&
+		    (obj->write_domain & I915_GEM_GPU_DOMAINS) == 0 &&
 		    !list_empty(&obj_priv->list))
 			list_del_init(&obj_priv->list);
 	}
@@ -3548,8 +3594,7 @@ i915_gem_object_unpin(struct drm_gem_object *obj)
 	 */
 	if (obj_priv->pin_count == 0) {
 		if (!obj_priv->active &&
-		    (obj->write_domain & ~(I915_GEM_DOMAIN_CPU |
-					   I915_GEM_DOMAIN_GTT)) == 0)
+		    (obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
 			list_move_tail(&obj_priv->list,
 				       &dev_priv->mm.inactive_list);
 		atomic_dec(&dev->pin_count);
@@ -3653,15 +3698,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
 
-	mutex_lock(&dev->struct_mutex);
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL) {
 		DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n",
 			  args->handle);
-		mutex_unlock(&dev->struct_mutex);
 		return -EBADF;
 	}
 
+	mutex_lock(&dev->struct_mutex);
 	/* Update the active list for the hardware's current position.
 	 * Otherwise this only updates on a delayed timer or when irqs are
 	 * actually unmasked, and our working set ends up being larger than
@@ -3800,9 +3844,8 @@ i915_gem_idle(struct drm_device *dev)
 
 	/* Flush the GPU along with all non-CPU write domains
 	 */
-	i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT),
-		       ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
-	seqno = i915_add_request(dev, ~I915_GEM_DOMAIN_CPU);
+	i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+	seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS);
 
 	if (seqno == 0) {
 		mutex_unlock(&dev->struct_mutex);
@@ -4352,3 +4395,17 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 	drm_agp_chipset_flush(dev);
 	return 0;
 }
+
+void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv)
+{
+	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
+
+	/* Clean up our request list when the client is going away, so that
+	 * later retire_requests won't dereference our soon-to-be-gone
+	 * file_priv.
+	 */
+	mutex_lock(&dev->struct_mutex);
+	while (!list_empty(&i915_file_priv->mm.request_list))
+		list_del_init(i915_file_priv->mm.request_list.next);
+	mutex_unlock(&dev->struct_mutex);
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 540dd336e6e..9a05cadaa4a 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -25,6 +25,8 @@
  *
  */
 
+#include <linux/acpi.h>
+#include <linux/pnp.h>
 #include "linux/string.h"
 #include "linux/bitops.h"
 #include "drmP.h"
@@ -81,6 +83,143 @@
  * to match what the GPU expects.
  */
 
+#define MCHBAR_I915 0x44
+#define MCHBAR_I965 0x48
+#define MCHBAR_SIZE (4*4096)
+
+#define DEVEN_REG 0x54
+#define   DEVEN_MCHBAR_EN (1 << 28)
+
+/* Allocate space for the MCH regs if needed, return nonzero on error */
+static int
+intel_alloc_mchbar_resource(struct drm_device *dev)
+{
+	struct pci_dev *bridge_dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp_lo, temp_hi = 0;
+	u64 mchbar_addr;
+	int ret = 0;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_DEBUG("no bridge dev?!\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (IS_I965G(dev))
+		pci_read_config_dword(bridge_dev, reg + 4, &temp_hi);
+	pci_read_config_dword(bridge_dev, reg, &temp_lo);
+	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
+
+	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+	if (mchbar_addr &&
+	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
+		ret = 0;
+		goto out_put;
+	}
+
+	/* Get some space for it */
+	ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
+				     MCHBAR_SIZE, MCHBAR_SIZE,
+				     PCIBIOS_MIN_MEM,
+				     0,   pcibios_align_resource,
+				     bridge_dev);
+	if (ret) {
+		DRM_DEBUG("failed bus alloc: %d\n", ret);
+		dev_priv->mch_res.start = 0;
+		goto out_put;
+	}
+
+	if (IS_I965G(dev))
+		pci_write_config_dword(bridge_dev, reg + 4,
+				       upper_32_bits(dev_priv->mch_res.start));
+
+	pci_write_config_dword(bridge_dev, reg,
+			       lower_32_bits(dev_priv->mch_res.start));
+out_put:
+	pci_dev_put(bridge_dev);
+out:
+	return ret;
+}
+
+/* Setup MCHBAR if possible, return true if we should disable it again */
+static bool
+intel_setup_mchbar(struct drm_device *dev)
+{
+	struct pci_dev *bridge_dev;
+	int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+	bool need_disable = false, enabled;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_DEBUG("no bridge dev?!\n");
+		goto out;
+	}
+
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_read_config_dword(bridge_dev, DEVEN_REG, &temp);
+		enabled = !!(temp & DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(bridge_dev, mchbar_reg, &temp);
+		enabled = temp & 1;
+	}
+
+	/* If it's already enabled, don't have to do anything */
+	if (enabled)
+		goto out_put;
+
+	if (intel_alloc_mchbar_resource(dev))
+		goto out_put;
+
+	need_disable = true;
+
+	/* Space is allocated or reserved, so enable it. */
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_write_config_dword(bridge_dev, DEVEN_REG,
+				       temp | DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(bridge_dev, mchbar_reg, &temp);
+		pci_write_config_dword(bridge_dev, mchbar_reg, temp | 1);
+	}
+out_put:
+	pci_dev_put(bridge_dev);
+out:
+	return need_disable;
+}
+
+static void
+intel_teardown_mchbar(struct drm_device *dev, bool disable)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct pci_dev *bridge_dev;
+	int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_DEBUG("no bridge dev?!\n");
+		return;
+	}
+
+	if (disable) {
+		if (IS_I915G(dev) || IS_I915GM(dev)) {
+			pci_read_config_dword(bridge_dev, DEVEN_REG, &temp);
+			temp &= ~DEVEN_MCHBAR_EN;
+			pci_write_config_dword(bridge_dev, DEVEN_REG, temp);
+		} else {
+			pci_read_config_dword(bridge_dev, mchbar_reg, &temp);
+			temp &= ~1;
+			pci_write_config_dword(bridge_dev, mchbar_reg, temp);
+		}
+	}
+
+	if (dev_priv->mch_res.start)
+		release_resource(&dev_priv->mch_res);
+}
+
 /**
  * Detects bit 6 swizzling of address lookup between IGD access and CPU
  * access through main memory.
@@ -91,6 +230,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
 	uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+	bool need_disable;
 
 	if (!IS_I9XX(dev)) {
 		/* As far as we know, the 865 doesn't have these bit 6
@@ -101,6 +241,9 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 	} else if (IS_MOBILE(dev)) {
 		uint32_t dcc;
 
+		/* Try to make sure MCHBAR is enabled before poking at it */
+		need_disable = intel_setup_mchbar(dev);
+
 		/* On mobile 9xx chipsets, channel interleave by the CPU is
 		 * determined by DCC.  For single-channel, neither the CPU
 		 * nor the GPU do swizzling.  For dual channel interleaved,
@@ -140,6 +283,8 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
 			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
 		}
+
+		intel_teardown_mchbar(dev, need_disable);
 	} else {
 		/* The 965, G33, and newer, have a very flexible memory
 		 * configuration.  It will enable dual-channel mode
@@ -170,6 +315,13 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 		}
 	}
 
+	/* FIXME: check with memory config on IGDNG */
+	if (IS_IGDNG(dev)) {
+		DRM_ERROR("disable tiling on IGDNG...\n");
+		swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+		swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+	}
+
 	dev_priv->mm.bit_6_swizzle_x = swizzle_x;
 	dev_priv->mm.bit_6_swizzle_y = swizzle_y;
 }
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 98bb4c878c4..b86b7b7130c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -58,6 +58,47 @@
 					 DRM_I915_VBLANK_PIPE_B)
 
 void
+igdng_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->gt_irq_mask_reg & mask) != 0) {
+		dev_priv->gt_irq_mask_reg &= ~mask;
+		I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
+		(void) I915_READ(GTIMR);
+	}
+}
+
+static inline void
+igdng_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->gt_irq_mask_reg & mask) != mask) {
+		dev_priv->gt_irq_mask_reg |= mask;
+		I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
+		(void) I915_READ(GTIMR);
+	}
+}
+
+/* For display hotplug interrupt */
+void
+igdng_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->irq_mask_reg & mask) != 0) {
+		dev_priv->irq_mask_reg &= ~mask;
+		I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
+		(void) I915_READ(DEIMR);
+	}
+}
+
+static inline void
+igdng_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->irq_mask_reg & mask) != mask) {
+		dev_priv->irq_mask_reg |= mask;
+		I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
+		(void) I915_READ(DEIMR);
+	}
+}
+
+void
 i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
 {
 	if ((dev_priv->irq_mask_reg & mask) != 0) {
@@ -196,6 +237,47 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	drm_sysfs_hotplug_event(dev);
 }
 
+irqreturn_t igdng_irq_handler(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int ret = IRQ_NONE;
+	u32 de_iir, gt_iir;
+	u32 new_de_iir, new_gt_iir;
+	struct drm_i915_master_private *master_priv;
+
+	de_iir = I915_READ(DEIIR);
+	gt_iir = I915_READ(GTIIR);
+
+	for (;;) {
+		if (de_iir == 0 && gt_iir == 0)
+			break;
+
+		ret = IRQ_HANDLED;
+
+		I915_WRITE(DEIIR, de_iir);
+		new_de_iir = I915_READ(DEIIR);
+		I915_WRITE(GTIIR, gt_iir);
+		new_gt_iir = I915_READ(GTIIR);
+
+		if (dev->primary->master) {
+			master_priv = dev->primary->master->driver_priv;
+			if (master_priv->sarea_priv)
+				master_priv->sarea_priv->last_dispatch =
+					READ_BREADCRUMB(dev_priv);
+		}
+
+		if (gt_iir & GT_USER_INTERRUPT) {
+			dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+			DRM_WAKEUP(&dev_priv->irq_queue);
+		}
+
+		de_iir = new_de_iir;
+		gt_iir = new_gt_iir;
+	}
+
+	return ret;
+}
+
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -212,6 +294,9 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 
 	atomic_inc(&dev_priv->irq_received);
 
+	if (IS_IGDNG(dev))
+		return igdng_irq_handler(dev);
+
 	iir = I915_READ(IIR);
 
 	if (IS_I965G(dev)) {
@@ -349,8 +434,12 @@ void i915_user_irq_get(struct drm_device *dev)
 	unsigned long irqflags;
 
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1))
-		i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+	if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
+		if (IS_IGDNG(dev))
+			igdng_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+		else
+			i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
@@ -361,8 +450,12 @@ void i915_user_irq_put(struct drm_device *dev)
 
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
-	if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0))
-		i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+	if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
+		if (IS_IGDNG(dev))
+			igdng_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+		else
+			i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
@@ -455,6 +548,9 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
 	if (!(pipeconf & PIPEACONF_ENABLE))
 		return -EINVAL;
 
+	if (IS_IGDNG(dev))
+		return 0;
+
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	if (IS_I965G(dev))
 		i915_enable_pipestat(dev_priv, pipe,
@@ -474,6 +570,9 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
 
+	if (IS_IGDNG(dev))
+		return;
+
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	i915_disable_pipestat(dev_priv, pipe,
 			      PIPE_VBLANK_INTERRUPT_ENABLE |
@@ -484,7 +583,9 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
 void i915_enable_interrupt (struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	opregion_enable_asle(dev);
+
+	if (!IS_IGDNG(dev))
+		opregion_enable_asle(dev);
 	dev_priv->irq_enabled = 1;
 }
 
@@ -545,12 +646,65 @@ int i915_vblank_swap(struct drm_device *dev, void *data,
 
 /* drm_dma.h hooks
 */
+static void igdng_irq_preinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	I915_WRITE(HWSTAM, 0xeffe);
+
+	/* XXX hotplug from PCH */
+
+	I915_WRITE(DEIMR, 0xffffffff);
+	I915_WRITE(DEIER, 0x0);
+	(void) I915_READ(DEIER);
+
+	/* and GT */
+	I915_WRITE(GTIMR, 0xffffffff);
+	I915_WRITE(GTIER, 0x0);
+	(void) I915_READ(GTIER);
+}
+
+static int igdng_irq_postinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	/* enable kind of interrupts always enabled */
+	u32 display_mask = DE_MASTER_IRQ_CONTROL /*| DE_PCH_EVENT */;
+	u32 render_mask = GT_USER_INTERRUPT;
+
+	dev_priv->irq_mask_reg = ~display_mask;
+	dev_priv->de_irq_enable_reg = display_mask;
+
+	/* should always can generate irq */
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+	I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
+	I915_WRITE(DEIER, dev_priv->de_irq_enable_reg);
+	(void) I915_READ(DEIER);
+
+	/* user interrupt should be enabled, but masked initial */
+	dev_priv->gt_irq_mask_reg = 0xffffffff;
+	dev_priv->gt_irq_enable_reg = render_mask;
+
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
+	I915_WRITE(GTIER, dev_priv->gt_irq_enable_reg);
+	(void) I915_READ(GTIER);
+
+	return 0;
+}
+
 void i915_driver_irq_preinstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
 	atomic_set(&dev_priv->irq_received, 0);
 
+	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+
+	if (IS_IGDNG(dev)) {
+		igdng_irq_preinstall(dev);
+		return;
+	}
+
 	if (I915_HAS_HOTPLUG(dev)) {
 		I915_WRITE(PORT_HOTPLUG_EN, 0);
 		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
@@ -562,7 +716,6 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 	I915_WRITE(IMR, 0xffffffff);
 	I915_WRITE(IER, 0x0);
 	(void) I915_READ(IER);
-	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
 }
 
 int i915_driver_irq_postinstall(struct drm_device *dev)
@@ -570,9 +723,12 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
 
+	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
+
 	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 
-	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_IGDNG(dev))
+		return igdng_irq_postinstall(dev);
 
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
@@ -613,11 +769,24 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	(void) I915_READ(IER);
 
 	opregion_enable_asle(dev);
-	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
 
 	return 0;
 }
 
+static void igdng_irq_uninstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	I915_WRITE(HWSTAM, 0xffffffff);
+
+	I915_WRITE(DEIMR, 0xffffffff);
+	I915_WRITE(DEIER, 0x0);
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+
+	I915_WRITE(GTIMR, 0xffffffff);
+	I915_WRITE(GTIER, 0x0);
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+}
+
 void i915_driver_irq_uninstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -627,6 +796,11 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
 
 	dev_priv->vblank_pipe = 0;
 
+	if (IS_IGDNG(dev)) {
+		igdng_irq_uninstall(dev);
+		return;
+	}
+
 	if (I915_HAS_HOTPLUG(dev)) {
 		I915_WRITE(PORT_HOTPLUG_EN, 0);
 		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 375569d01d0..f6237a0b113 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -450,6 +450,13 @@
 #define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
 #define   PLL_REF_INPUT_MASK		(3 << 13)
 #define   PLL_LOAD_PULSE_PHASE_SHIFT		9
+/* IGDNG */
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT     9
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK      (7 << 9)
+# define PLL_REF_SDVO_HDMI_MULTIPLIER(x)	(((x)-1) << 9)
+# define DPLL_FPA1_P1_POST_DIV_SHIFT            0
+# define DPLL_FPA1_P1_POST_DIV_MASK             0xff
+
 /*
  * Parallel to Serial Load Pulse phase selection.
  * Selects the phase for the 10X DPLL clock for the PCIe
@@ -631,8 +638,11 @@
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN		0x61110
 #define   HDMIB_HOTPLUG_INT_EN			(1 << 29)
+#define   DPB_HOTPLUG_INT_EN			(1 << 29)
 #define   HDMIC_HOTPLUG_INT_EN			(1 << 28)
+#define   DPC_HOTPLUG_INT_EN			(1 << 28)
 #define   HDMID_HOTPLUG_INT_EN			(1 << 27)
+#define   DPD_HOTPLUG_INT_EN			(1 << 27)
 #define   SDVOB_HOTPLUG_INT_EN			(1 << 26)
 #define   SDVOC_HOTPLUG_INT_EN			(1 << 25)
 #define   TV_HOTPLUG_INT_EN			(1 << 18)
@@ -665,8 +675,11 @@
 
 #define PORT_HOTPLUG_STAT	0x61114
 #define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)
+#define   DPB_HOTPLUG_INT_STATUS		(1 << 29)
 #define   HDMIC_HOTPLUG_INT_STATUS		(1 << 28)
+#define   DPC_HOTPLUG_INT_STATUS		(1 << 28)
 #define   HDMID_HOTPLUG_INT_STATUS		(1 << 27)
+#define   DPD_HOTPLUG_INT_STATUS		(1 << 27)
 #define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
 #define   TV_HOTPLUG_INT_STATUS			(1 << 10)
 #define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
@@ -951,15 +964,15 @@
 # define DAC_A_1_3_V			(0 << 4)
 # define DAC_A_1_1_V			(1 << 4)
 # define DAC_A_0_7_V			(2 << 4)
-# define DAC_A_OFF			(3 << 4)
+# define DAC_A_MASK			(3 << 4)
 # define DAC_B_1_3_V			(0 << 2)
 # define DAC_B_1_1_V			(1 << 2)
 # define DAC_B_0_7_V			(2 << 2)
-# define DAC_B_OFF			(3 << 2)
+# define DAC_B_MASK			(3 << 2)
 # define DAC_C_1_3_V			(0 << 0)
 # define DAC_C_1_1_V			(1 << 0)
 # define DAC_C_0_7_V			(2 << 0)
-# define DAC_C_OFF			(3 << 0)
+# define DAC_C_MASK			(3 << 0)
 
 /**
  * CSC coefficients are stored in a floating point format with 9 bits of
@@ -1328,6 +1341,163 @@
 #define TV_V_CHROMA_0		0x68400
 #define TV_V_CHROMA_42		0x684a8
 
+/* Display Port */
+#define DP_B				0x64100
+#define DP_C				0x64200
+#define DP_D				0x64300
+
+#define   DP_PORT_EN			(1 << 31)
+#define   DP_PIPEB_SELECT		(1 << 30)
+
+/* Link training mode - select a suitable mode for each stage */
+#define   DP_LINK_TRAIN_PAT_1		(0 << 28)
+#define   DP_LINK_TRAIN_PAT_2		(1 << 28)
+#define   DP_LINK_TRAIN_PAT_IDLE	(2 << 28)
+#define   DP_LINK_TRAIN_OFF		(3 << 28)
+#define   DP_LINK_TRAIN_MASK		(3 << 28)
+#define   DP_LINK_TRAIN_SHIFT		28
+
+/* Signal voltages. These are mostly controlled by the other end */
+#define   DP_VOLTAGE_0_4		(0 << 25)
+#define   DP_VOLTAGE_0_6		(1 << 25)
+#define   DP_VOLTAGE_0_8		(2 << 25)
+#define   DP_VOLTAGE_1_2		(3 << 25)
+#define   DP_VOLTAGE_MASK		(7 << 25)
+#define   DP_VOLTAGE_SHIFT		25
+
+/* Signal pre-emphasis levels, like voltages, the other end tells us what
+ * they want
+ */
+#define   DP_PRE_EMPHASIS_0		(0 << 22)
+#define   DP_PRE_EMPHASIS_3_5		(1 << 22)
+#define   DP_PRE_EMPHASIS_6		(2 << 22)
+#define   DP_PRE_EMPHASIS_9_5		(3 << 22)
+#define   DP_PRE_EMPHASIS_MASK		(7 << 22)
+#define   DP_PRE_EMPHASIS_SHIFT		22
+
+/* How many wires to use. I guess 3 was too hard */
+#define   DP_PORT_WIDTH_1		(0 << 19)
+#define   DP_PORT_WIDTH_2		(1 << 19)
+#define   DP_PORT_WIDTH_4		(3 << 19)
+#define   DP_PORT_WIDTH_MASK		(7 << 19)
+
+/* Mystic DPCD version 1.1 special mode */
+#define   DP_ENHANCED_FRAMING		(1 << 18)
+
+/** locked once port is enabled */
+#define   DP_PORT_REVERSAL		(1 << 15)
+
+/** sends the clock on lane 15 of the PEG for debug */
+#define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)
+
+#define   DP_SCRAMBLING_DISABLE		(1 << 12)
+
+/** limit RGB values to avoid confusing TVs */
+#define   DP_COLOR_RANGE_16_235		(1 << 8)
+
+/** Turn on the audio link */
+#define   DP_AUDIO_OUTPUT_ENABLE	(1 << 6)
+
+/** vs and hs sync polarity */
+#define   DP_SYNC_VS_HIGH		(1 << 4)
+#define   DP_SYNC_HS_HIGH		(1 << 3)
+
+/** A fantasy */
+#define   DP_DETECTED			(1 << 2)
+
+/** The aux channel provides a way to talk to the
+ * signal sink for DDC etc. Max packet size supported
+ * is 20 bytes in each direction, hence the 5 fixed
+ * data registers
+ */
+#define DPB_AUX_CH_CTL			0x64110
+#define DPB_AUX_CH_DATA1		0x64114
+#define DPB_AUX_CH_DATA2		0x64118
+#define DPB_AUX_CH_DATA3		0x6411c
+#define DPB_AUX_CH_DATA4		0x64120
+#define DPB_AUX_CH_DATA5		0x64124
+
+#define DPC_AUX_CH_CTL			0x64210
+#define DPC_AUX_CH_DATA1		0x64214
+#define DPC_AUX_CH_DATA2		0x64218
+#define DPC_AUX_CH_DATA3		0x6421c
+#define DPC_AUX_CH_DATA4		0x64220
+#define DPC_AUX_CH_DATA5		0x64224
+
+#define DPD_AUX_CH_CTL			0x64310
+#define DPD_AUX_CH_DATA1		0x64314
+#define DPD_AUX_CH_DATA2		0x64318
+#define DPD_AUX_CH_DATA3		0x6431c
+#define DPD_AUX_CH_DATA4		0x64320
+#define DPD_AUX_CH_DATA5		0x64324
+
+#define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
+#define   DP_AUX_CH_CTL_DONE		    (1 << 30)
+#define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)
+#define   DP_AUX_CH_CTL_TIME_OUT_ERROR	    (1 << 28)
+#define   DP_AUX_CH_CTL_TIME_OUT_400us	    (0 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_600us	    (1 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_800us	    (2 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_1600us	    (3 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_MASK	    (3 << 26)
+#define   DP_AUX_CH_CTL_RECEIVE_ERROR	    (1 << 25)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_MASK    (0x1f << 20)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT   20
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_MASK   (0xf << 16)
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT  16
+#define   DP_AUX_CH_CTL_AUX_AKSV_SELECT	    (1 << 15)
+#define   DP_AUX_CH_CTL_MANCHESTER_TEST	    (1 << 14)
+#define   DP_AUX_CH_CTL_SYNC_TEST	    (1 << 13)
+#define   DP_AUX_CH_CTL_DEGLITCH_TEST	    (1 << 12)
+#define   DP_AUX_CH_CTL_PRECHARGE_TEST	    (1 << 11)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK    (0x7ff)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT   0
+
+/*
+ * Computing GMCH M and N values for the Display Port link
+ *
+ * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes
+ *
+ * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz)
+ *
+ * The GMCH value is used internally
+ *
+ * bytes_per_pixel is the number of bytes coming out of the plane,
+ * which is after the LUTs, so we want the bytes for our color format.
+ * For our current usage, this is always 3, one byte for R, G and B.
+ */
+#define PIPEA_GMCH_DATA_M			0x70050
+#define PIPEB_GMCH_DATA_M			0x71050
+
+/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */
+#define   PIPE_GMCH_DATA_M_TU_SIZE_MASK		(0x3f << 25)
+#define   PIPE_GMCH_DATA_M_TU_SIZE_SHIFT	25
+
+#define   PIPE_GMCH_DATA_M_MASK			(0xffffff)
+
+#define PIPEA_GMCH_DATA_N			0x70054
+#define PIPEB_GMCH_DATA_N			0x71054
+#define   PIPE_GMCH_DATA_N_MASK			(0xffffff)
+
+/*
+ * Computing Link M and N values for the Display Port link
+ *
+ * Link M / N = pixel_clock / ls_clk
+ *
+ * (the DP spec calls pixel_clock the 'strm_clk')
+ *
+ * The Link value is transmitted in the Main Stream
+ * Attributes and VB-ID.
+ */
+
+#define PIPEA_DP_LINK_M				0x70060
+#define PIPEB_DP_LINK_M				0x71060
+#define   PIPEA_DP_LINK_M_MASK			(0xffffff)
+
+#define PIPEA_DP_LINK_N				0x70064
+#define PIPEB_DP_LINK_N				0x71064
+#define   PIPEA_DP_LINK_N_MASK			(0xffffff)
+
 /* Display & cursor control */
 
 /* Pipe A */
@@ -1517,4 +1687,444 @@
 # define VGA_2X_MODE				(1 << 30)
 # define VGA_PIPE_B_SELECT			(1 << 29)
 
+/* IGDNG */
+
+#define CPU_VGACNTRL	0x41000
+
+#define DIGITAL_PORT_HOTPLUG_CNTRL      0x44030
+#define  DIGITAL_PORTA_HOTPLUG_ENABLE           (1 << 4)
+#define  DIGITAL_PORTA_SHORT_PULSE_2MS          (0 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_4_5MS        (1 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_6MS          (2 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_100MS        (3 << 2)
+#define  DIGITAL_PORTA_NO_DETECT                (0 << 0)
+#define  DIGITAL_PORTA_LONG_PULSE_DETECT_MASK   (1 << 1)
+#define  DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK  (1 << 0)
+
+/* refresh rate hardware control */
+#define RR_HW_CTL       0x45300
+#define  RR_HW_LOW_POWER_FRAMES_MASK    0xff
+#define  RR_HW_HIGH_POWER_FRAMES_MASK   0xff00
+
+#define FDI_PLL_BIOS_0  0x46000
+#define FDI_PLL_BIOS_1  0x46004
+#define FDI_PLL_BIOS_2  0x46008
+#define DISPLAY_PORT_PLL_BIOS_0         0x4600c
+#define DISPLAY_PORT_PLL_BIOS_1         0x46010
+#define DISPLAY_PORT_PLL_BIOS_2         0x46014
+
+#define FDI_PLL_FREQ_CTL        0x46030
+#define  FDI_PLL_FREQ_CHANGE_REQUEST    (1<<24)
+#define  FDI_PLL_FREQ_LOCK_LIMIT_MASK   0xfff00
+#define  FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK  0xff
+
+
+#define PIPEA_DATA_M1           0x60030
+#define  TU_SIZE(x)             (((x)-1) << 25) /* default size 64 */
+#define  TU_SIZE_MASK           0x7e000000
+#define  PIPEA_DATA_M1_OFFSET   0
+#define PIPEA_DATA_N1           0x60034
+#define  PIPEA_DATA_N1_OFFSET   0
+
+#define PIPEA_DATA_M2           0x60038
+#define  PIPEA_DATA_M2_OFFSET   0
+#define PIPEA_DATA_N2           0x6003c
+#define  PIPEA_DATA_N2_OFFSET   0
+
+#define PIPEA_LINK_M1           0x60040
+#define  PIPEA_LINK_M1_OFFSET   0
+#define PIPEA_LINK_N1           0x60044
+#define  PIPEA_LINK_N1_OFFSET   0
+
+#define PIPEA_LINK_M2           0x60048
+#define  PIPEA_LINK_M2_OFFSET   0
+#define PIPEA_LINK_N2           0x6004c
+#define  PIPEA_LINK_N2_OFFSET   0
+
+/* PIPEB timing regs are same start from 0x61000 */
+
+#define PIPEB_DATA_M1           0x61030
+#define  PIPEB_DATA_M1_OFFSET   0
+#define PIPEB_DATA_N1           0x61034
+#define  PIPEB_DATA_N1_OFFSET   0
+
+#define PIPEB_DATA_M2           0x61038
+#define  PIPEB_DATA_M2_OFFSET   0
+#define PIPEB_DATA_N2           0x6103c
+#define  PIPEB_DATA_N2_OFFSET   0
+
+#define PIPEB_LINK_M1           0x61040
+#define  PIPEB_LINK_M1_OFFSET   0
+#define PIPEB_LINK_N1           0x61044
+#define  PIPEB_LINK_N1_OFFSET   0
+
+#define PIPEB_LINK_M2           0x61048
+#define  PIPEB_LINK_M2_OFFSET   0
+#define PIPEB_LINK_N2           0x6104c
+#define  PIPEB_LINK_N2_OFFSET   0
+
+/* CPU panel fitter */
+#define PFA_CTL_1               0x68080
+#define PFB_CTL_1               0x68880
+#define  PF_ENABLE              (1<<31)
+
+/* legacy palette */
+#define LGC_PALETTE_A           0x4a000
+#define LGC_PALETTE_B           0x4a800
+
+/* interrupts */
+#define DE_MASTER_IRQ_CONTROL   (1 << 31)
+#define DE_SPRITEB_FLIP_DONE    (1 << 29)
+#define DE_SPRITEA_FLIP_DONE    (1 << 28)
+#define DE_PLANEB_FLIP_DONE     (1 << 27)
+#define DE_PLANEA_FLIP_DONE     (1 << 26)
+#define DE_PCU_EVENT            (1 << 25)
+#define DE_GTT_FAULT            (1 << 24)
+#define DE_POISON               (1 << 23)
+#define DE_PERFORM_COUNTER      (1 << 22)
+#define DE_PCH_EVENT            (1 << 21)
+#define DE_AUX_CHANNEL_A        (1 << 20)
+#define DE_DP_A_HOTPLUG         (1 << 19)
+#define DE_GSE                  (1 << 18)
+#define DE_PIPEB_VBLANK         (1 << 15)
+#define DE_PIPEB_EVEN_FIELD     (1 << 14)
+#define DE_PIPEB_ODD_FIELD      (1 << 13)
+#define DE_PIPEB_LINE_COMPARE   (1 << 12)
+#define DE_PIPEB_VSYNC          (1 << 11)
+#define DE_PIPEB_FIFO_UNDERRUN  (1 << 8)
+#define DE_PIPEA_VBLANK         (1 << 7)
+#define DE_PIPEA_EVEN_FIELD     (1 << 6)
+#define DE_PIPEA_ODD_FIELD      (1 << 5)
+#define DE_PIPEA_LINE_COMPARE   (1 << 4)
+#define DE_PIPEA_VSYNC          (1 << 3)
+#define DE_PIPEA_FIFO_UNDERRUN  (1 << 0)
+
+#define DEISR   0x44000
+#define DEIMR   0x44004
+#define DEIIR   0x44008
+#define DEIER   0x4400c
+
+/* GT interrupt */
+#define GT_SYNC_STATUS          (1 << 2)
+#define GT_USER_INTERRUPT       (1 << 0)
+
+#define GTISR   0x44010
+#define GTIMR   0x44014
+#define GTIIR   0x44018
+#define GTIER   0x4401c
+
+/* PCH */
+
+/* south display engine interrupt */
+#define SDE_CRT_HOTPLUG         (1 << 11)
+#define SDE_PORTD_HOTPLUG       (1 << 10)
+#define SDE_PORTC_HOTPLUG       (1 << 9)
+#define SDE_PORTB_HOTPLUG       (1 << 8)
+#define SDE_SDVOB_HOTPLUG       (1 << 6)
+
+#define SDEISR  0xc4000
+#define SDEIMR  0xc4004
+#define SDEIIR  0xc4008
+#define SDEIER  0xc400c
+
+/* digital port hotplug */
+#define PCH_PORT_HOTPLUG        0xc4030
+#define PORTD_HOTPLUG_ENABLE            (1 << 20)
+#define PORTD_PULSE_DURATION_2ms        (0)
+#define PORTD_PULSE_DURATION_4_5ms      (1 << 18)
+#define PORTD_PULSE_DURATION_6ms        (2 << 18)
+#define PORTD_PULSE_DURATION_100ms      (3 << 18)
+#define PORTD_HOTPLUG_NO_DETECT         (0)
+#define PORTD_HOTPLUG_SHORT_DETECT      (1 << 16)
+#define PORTD_HOTPLUG_LONG_DETECT       (1 << 17)
+#define PORTC_HOTPLUG_ENABLE            (1 << 12)
+#define PORTC_PULSE_DURATION_2ms        (0)
+#define PORTC_PULSE_DURATION_4_5ms      (1 << 10)
+#define PORTC_PULSE_DURATION_6ms        (2 << 10)
+#define PORTC_PULSE_DURATION_100ms      (3 << 10)
+#define PORTC_HOTPLUG_NO_DETECT         (0)
+#define PORTC_HOTPLUG_SHORT_DETECT      (1 << 8)
+#define PORTC_HOTPLUG_LONG_DETECT       (1 << 9)
+#define PORTB_HOTPLUG_ENABLE            (1 << 4)
+#define PORTB_PULSE_DURATION_2ms        (0)
+#define PORTB_PULSE_DURATION_4_5ms      (1 << 2)
+#define PORTB_PULSE_DURATION_6ms        (2 << 2)
+#define PORTB_PULSE_DURATION_100ms      (3 << 2)
+#define PORTB_HOTPLUG_NO_DETECT         (0)
+#define PORTB_HOTPLUG_SHORT_DETECT      (1 << 0)
+#define PORTB_HOTPLUG_LONG_DETECT       (1 << 1)
+
+#define PCH_GPIOA               0xc5010
+#define PCH_GPIOB               0xc5014
+#define PCH_GPIOC               0xc5018
+#define PCH_GPIOD               0xc501c
+#define PCH_GPIOE               0xc5020
+#define PCH_GPIOF               0xc5024
+
+#define PCH_DPLL_A              0xc6014
+#define PCH_DPLL_B              0xc6018
+
+#define PCH_FPA0                0xc6040
+#define PCH_FPA1                0xc6044
+#define PCH_FPB0                0xc6048
+#define PCH_FPB1                0xc604c
+
+#define PCH_DPLL_TEST           0xc606c
+
+#define PCH_DREF_CONTROL        0xC6200
+#define  DREF_CONTROL_MASK      0x7fc3
+#define  DREF_CPU_SOURCE_OUTPUT_DISABLE         (0<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD      (2<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_NONSPREAD       (3<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_MASK		(3<<13)
+#define  DREF_SSC_SOURCE_DISABLE                (0<<11)
+#define  DREF_SSC_SOURCE_ENABLE                 (2<<11)
+#define  DREF_SSC_SOURCE_MASK			(2<<11)
+#define  DREF_NONSPREAD_SOURCE_DISABLE          (0<<9)
+#define  DREF_NONSPREAD_CK505_ENABLE		(1<<9)
+#define  DREF_NONSPREAD_SOURCE_ENABLE           (2<<9)
+#define  DREF_NONSPREAD_SOURCE_MASK		(2<<9)
+#define  DREF_SUPERSPREAD_SOURCE_DISABLE        (0<<7)
+#define  DREF_SUPERSPREAD_SOURCE_ENABLE         (2<<7)
+#define  DREF_SSC4_DOWNSPREAD                   (0<<6)
+#define  DREF_SSC4_CENTERSPREAD                 (1<<6)
+#define  DREF_SSC1_DISABLE                      (0<<1)
+#define  DREF_SSC1_ENABLE                       (1<<1)
+#define  DREF_SSC4_DISABLE                      (0)
+#define  DREF_SSC4_ENABLE                       (1)
+
+#define PCH_RAWCLK_FREQ         0xc6204
+#define  FDL_TP1_TIMER_SHIFT    12
+#define  FDL_TP1_TIMER_MASK     (3<<12)
+#define  FDL_TP2_TIMER_SHIFT    10
+#define  FDL_TP2_TIMER_MASK     (3<<10)
+#define  RAWCLK_FREQ_MASK       0x3ff
+
+#define PCH_DPLL_TMR_CFG        0xc6208
+
+#define PCH_SSC4_PARMS          0xc6210
+#define PCH_SSC4_AUX_PARMS      0xc6214
+
+/* transcoder */
+
+#define TRANS_HTOTAL_A          0xe0000
+#define  TRANS_HTOTAL_SHIFT     16
+#define  TRANS_HACTIVE_SHIFT    0
+#define TRANS_HBLANK_A          0xe0004
+#define  TRANS_HBLANK_END_SHIFT 16
+#define  TRANS_HBLANK_START_SHIFT 0
+#define TRANS_HSYNC_A           0xe0008
+#define  TRANS_HSYNC_END_SHIFT  16
+#define  TRANS_HSYNC_START_SHIFT 0
+#define TRANS_VTOTAL_A          0xe000c
+#define  TRANS_VTOTAL_SHIFT     16
+#define  TRANS_VACTIVE_SHIFT    0
+#define TRANS_VBLANK_A          0xe0010
+#define  TRANS_VBLANK_END_SHIFT 16
+#define  TRANS_VBLANK_START_SHIFT 0
+#define TRANS_VSYNC_A           0xe0014
+#define  TRANS_VSYNC_END_SHIFT  16
+#define  TRANS_VSYNC_START_SHIFT 0
+
+#define TRANSA_DATA_M1          0xe0030
+#define TRANSA_DATA_N1          0xe0034
+#define TRANSA_DATA_M2          0xe0038
+#define TRANSA_DATA_N2          0xe003c
+#define TRANSA_DP_LINK_M1       0xe0040
+#define TRANSA_DP_LINK_N1       0xe0044
+#define TRANSA_DP_LINK_M2       0xe0048
+#define TRANSA_DP_LINK_N2       0xe004c
+
+#define TRANS_HTOTAL_B          0xe1000
+#define TRANS_HBLANK_B          0xe1004
+#define TRANS_HSYNC_B           0xe1008
+#define TRANS_VTOTAL_B          0xe100c
+#define TRANS_VBLANK_B          0xe1010
+#define TRANS_VSYNC_B           0xe1014
+
+#define TRANSB_DATA_M1          0xe1030
+#define TRANSB_DATA_N1          0xe1034
+#define TRANSB_DATA_M2          0xe1038
+#define TRANSB_DATA_N2          0xe103c
+#define TRANSB_DP_LINK_M1       0xe1040
+#define TRANSB_DP_LINK_N1       0xe1044
+#define TRANSB_DP_LINK_M2       0xe1048
+#define TRANSB_DP_LINK_N2       0xe104c
+
+#define TRANSACONF              0xf0008
+#define TRANSBCONF              0xf1008
+#define  TRANS_DISABLE          (0<<31)
+#define  TRANS_ENABLE           (1<<31)
+#define  TRANS_STATE_MASK       (1<<30)
+#define  TRANS_STATE_DISABLE    (0<<30)
+#define  TRANS_STATE_ENABLE     (1<<30)
+#define  TRANS_FSYNC_DELAY_HB1  (0<<27)
+#define  TRANS_FSYNC_DELAY_HB2  (1<<27)
+#define  TRANS_FSYNC_DELAY_HB3  (2<<27)
+#define  TRANS_FSYNC_DELAY_HB4  (3<<27)
+#define  TRANS_DP_AUDIO_ONLY    (1<<26)
+#define  TRANS_DP_VIDEO_AUDIO   (0<<26)
+#define  TRANS_PROGRESSIVE      (0<<21)
+#define  TRANS_8BPC             (0<<5)
+#define  TRANS_10BPC            (1<<5)
+#define  TRANS_6BPC             (2<<5)
+#define  TRANS_12BPC            (3<<5)
+
+#define FDI_RXA_CHICKEN         0xc200c
+#define FDI_RXB_CHICKEN         0xc2010
+#define  FDI_RX_PHASE_SYNC_POINTER_ENABLE       (1)
+
+/* CPU: FDI_TX */
+#define FDI_TXA_CTL             0x60100
+#define FDI_TXB_CTL             0x61100
+#define  FDI_TX_DISABLE         (0<<31)
+#define  FDI_TX_ENABLE          (1<<31)
+#define  FDI_LINK_TRAIN_PATTERN_1       (0<<28)
+#define  FDI_LINK_TRAIN_PATTERN_2       (1<<28)
+#define  FDI_LINK_TRAIN_PATTERN_IDLE    (2<<28)
+#define  FDI_LINK_TRAIN_NONE            (3<<28)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_4V    (0<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_6V    (1<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_8V    (2<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_1_2V    (3<<25)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_2X   (2<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_3X   (3<<22)
+#define  FDI_DP_PORT_WIDTH_X1           (0<<19)
+#define  FDI_DP_PORT_WIDTH_X2           (1<<19)
+#define  FDI_DP_PORT_WIDTH_X3           (2<<19)
+#define  FDI_DP_PORT_WIDTH_X4           (3<<19)
+#define  FDI_TX_ENHANCE_FRAME_ENABLE    (1<<18)
+/* IGDNG: hardwired to 1 */
+#define  FDI_TX_PLL_ENABLE              (1<<14)
+/* both Tx and Rx */
+#define  FDI_SCRAMBLING_ENABLE          (0<<7)
+#define  FDI_SCRAMBLING_DISABLE         (1<<7)
+
+/* FDI_RX, FDI_X is hard-wired to Transcoder_X */
+#define FDI_RXA_CTL             0xf000c
+#define FDI_RXB_CTL             0xf100c
+#define  FDI_RX_ENABLE          (1<<31)
+#define  FDI_RX_DISABLE         (0<<31)
+/* train, dp width same as FDI_TX */
+#define  FDI_DP_PORT_WIDTH_X8           (7<<19)
+#define  FDI_8BPC                       (0<<16)
+#define  FDI_10BPC                      (1<<16)
+#define  FDI_6BPC                       (2<<16)
+#define  FDI_12BPC                      (3<<16)
+#define  FDI_LINK_REVERSE_OVERWRITE     (1<<15)
+#define  FDI_DMI_LINK_REVERSE_MASK      (1<<14)
+#define  FDI_RX_PLL_ENABLE              (1<<13)
+#define  FDI_FS_ERR_CORRECT_ENABLE      (1<<11)
+#define  FDI_FE_ERR_CORRECT_ENABLE      (1<<10)
+#define  FDI_FS_ERR_REPORT_ENABLE       (1<<9)
+#define  FDI_FE_ERR_REPORT_ENABLE       (1<<8)
+#define  FDI_RX_ENHANCE_FRAME_ENABLE    (1<<6)
+#define  FDI_SEL_RAWCLK                 (0<<4)
+#define  FDI_SEL_PCDCLK                 (1<<4)
+
+#define FDI_RXA_MISC            0xf0010
+#define FDI_RXB_MISC            0xf1010
+#define FDI_RXA_TUSIZE1         0xf0030
+#define FDI_RXA_TUSIZE2         0xf0038
+#define FDI_RXB_TUSIZE1         0xf1030
+#define FDI_RXB_TUSIZE2         0xf1038
+
+/* FDI_RX interrupt register format */
+#define FDI_RX_INTER_LANE_ALIGN         (1<<10)
+#define FDI_RX_SYMBOL_LOCK              (1<<9) /* train 2 */
+#define FDI_RX_BIT_LOCK                 (1<<8) /* train 1 */
+#define FDI_RX_TRAIN_PATTERN_2_FAIL     (1<<7)
+#define FDI_RX_FS_CODE_ERR              (1<<6)
+#define FDI_RX_FE_CODE_ERR              (1<<5)
+#define FDI_RX_SYMBOL_ERR_RATE_ABOVE    (1<<4)
+#define FDI_RX_HDCP_LINK_FAIL           (1<<3)
+#define FDI_RX_PIXEL_FIFO_OVERFLOW      (1<<2)
+#define FDI_RX_CROSS_CLOCK_OVERFLOW     (1<<1)
+#define FDI_RX_SYMBOL_QUEUE_OVERFLOW    (1<<0)
+
+#define FDI_RXA_IIR             0xf0014
+#define FDI_RXA_IMR             0xf0018
+#define FDI_RXB_IIR             0xf1014
+#define FDI_RXB_IMR             0xf1018
+
+#define FDI_PLL_CTL_1           0xfe000
+#define FDI_PLL_CTL_2           0xfe004
+
+/* CRT */
+#define PCH_ADPA                0xe1100
+#define  ADPA_TRANS_SELECT_MASK (1<<30)
+#define  ADPA_TRANS_A_SELECT    0
+#define  ADPA_TRANS_B_SELECT    (1<<30)
+#define  ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
+#define  ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MONO  (2<<24)
+#define  ADPA_CRT_HOTPLUG_ENABLE        (1<<23)
+#define  ADPA_CRT_HOTPLUG_PERIOD_64     (0<<22)
+#define  ADPA_CRT_HOTPLUG_PERIOD_128    (1<<22)
+#define  ADPA_CRT_HOTPLUG_WARMUP_5MS    (0<<21)
+#define  ADPA_CRT_HOTPLUG_WARMUP_10MS   (1<<21)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_2S     (0<<20)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_4S     (1<<20)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_40    (0<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_50    (1<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_60    (2<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_70    (3<<18)
+#define  ADPA_CRT_HOTPLUG_VOLREF_325MV  (0<<17)
+#define  ADPA_CRT_HOTPLUG_VOLREF_475MV  (1<<17)
+#define  ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
+
+/* or SDVOB */
+#define HDMIB   0xe1140
+#define  PORT_ENABLE    (1 << 31)
+#define  TRANSCODER_A   (0)
+#define  TRANSCODER_B   (1 << 30)
+#define  COLOR_FORMAT_8bpc      (0)
+#define  COLOR_FORMAT_12bpc     (3 << 26)
+#define  SDVOB_HOTPLUG_ENABLE   (1 << 23)
+#define  SDVO_ENCODING          (0)
+#define  TMDS_ENCODING          (2 << 10)
+#define  NULL_PACKET_VSYNC_ENABLE       (1 << 9)
+#define  SDVOB_BORDER_ENABLE    (1 << 7)
+#define  AUDIO_ENABLE           (1 << 6)
+#define  VSYNC_ACTIVE_HIGH      (1 << 4)
+#define  HSYNC_ACTIVE_HIGH      (1 << 3)
+#define  PORT_DETECTED          (1 << 2)
+
+#define HDMIC   0xe1150
+#define HDMID   0xe1160
+
+#define PCH_LVDS	0xe1180
+#define  LVDS_DETECTED	(1 << 1)
+
+#define BLC_PWM_CPU_CTL2	0x48250
+#define  PWM_ENABLE		(1 << 31)
+#define  PWM_PIPE_A		(0 << 29)
+#define  PWM_PIPE_B		(1 << 29)
+#define BLC_PWM_CPU_CTL		0x48254
+
+#define BLC_PWM_PCH_CTL1	0xc8250
+#define  PWM_PCH_ENABLE		(1 << 31)
+#define  PWM_POLARITY_ACTIVE_LOW	(1 << 29)
+#define  PWM_POLARITY_ACTIVE_HIGH	(0 << 29)
+#define  PWM_POLARITY_ACTIVE_LOW2	(1 << 28)
+#define  PWM_POLARITY_ACTIVE_HIGH2	(0 << 28)
+
+#define BLC_PWM_PCH_CTL2	0xc8254
+
+#define PCH_PP_STATUS		0xc7200
+#define PCH_PP_CONTROL		0xc7204
+#define  EDP_FORCE_VDD		(1 << 3)
+#define  EDP_BLC_ENABLE		(1 << 2)
+#define  PANEL_POWER_RESET	(1 << 1)
+#define  PANEL_POWER_OFF	(0 << 0)
+#define  PANEL_POWER_ON		(1 << 0)
+#define PCH_PP_ON_DELAYS	0xc7208
+#define  EDP_PANEL		(1 << 30)
+#define PCH_PP_OFF_DELAYS	0xc720c
+#define PCH_PP_DIVISOR		0xc7210
+
 #endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index ce8a21344a7..a98e2831ed3 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -295,6 +295,16 @@ int i915_save_state(struct drm_device *dev)
 	i915_save_palette(dev, PIPE_B);
 	dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
 
+	/* Cursor state */
+	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+	dev_priv->saveCURABASE = I915_READ(CURABASE);
+	dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+	dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+	dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+	if (!IS_I9XX(dev))
+		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
 	/* CRT state */
 	dev_priv->saveADPA = I915_READ(ADPA);
 
@@ -480,6 +490,16 @@ int i915_restore_state(struct drm_device *dev)
 	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
 	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	/* Cursor state */
+	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+	I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+	I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+	I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+	I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+	if (!IS_I9XX(dev))
+		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
 	/* CRT state */
 	I915_WRITE(ADPA, dev_priv->saveADPA);
 
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 9d78cff33b2..754dd22fdd7 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -30,6 +30,8 @@
 #include "i915_drv.h"
 #include "intel_bios.h"
 
+#define	SLAVE_ADDR1	0x70
+#define	SLAVE_ADDR2	0x72
 
 static void *
 find_section(struct bdb_header *bdb, int section_id)
@@ -193,6 +195,88 @@ parse_general_features(struct drm_i915_private *dev_priv,
 	}
 }
 
+static void
+parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct sdvo_device_mapping *p_mapping;
+	struct bdb_general_definitions *p_defs;
+	struct child_device_config *p_child;
+	int i, child_device_num, count;
+	u16	block_size, *block_ptr;
+
+	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (!p_defs) {
+		DRM_DEBUG("No general definition block is found\n");
+		return;
+	}
+	/* judge whether the size of child device meets the requirements.
+	 * If the child device size obtained from general definition block
+	 * is different with sizeof(struct child_device_config), skip the
+	 * parsing of sdvo device info
+	 */
+	if (p_defs->child_dev_size != sizeof(*p_child)) {
+		/* different child dev size . Ignore it */
+		DRM_DEBUG("different child size is found. Invalid.\n");
+		return;
+	}
+	/* get the block size of general definitions */
+	block_ptr = (u16 *)((char *)p_defs - 2);
+	block_size = *block_ptr;
+	/* get the number of child device */
+	child_device_num = (block_size - sizeof(*p_defs)) /
+				sizeof(*p_child);
+	count = 0;
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		if (p_child->slave_addr != SLAVE_ADDR1 &&
+			p_child->slave_addr != SLAVE_ADDR2) {
+			/*
+			 * If the slave address is neither 0x70 nor 0x72,
+			 * it is not a SDVO device. Skip it.
+			 */
+			continue;
+		}
+		if (p_child->dvo_port != DEVICE_PORT_DVOB &&
+			p_child->dvo_port != DEVICE_PORT_DVOC) {
+			/* skip the incorrect SDVO port */
+			DRM_DEBUG("Incorrect SDVO port. Skip it \n");
+			continue;
+		}
+		DRM_DEBUG("the SDVO device with slave addr %2x is found on "
+				"%s port\n",
+				p_child->slave_addr,
+				(p_child->dvo_port == DEVICE_PORT_DVOB) ?
+					"SDVOB" : "SDVOC");
+		p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]);
+		if (!p_mapping->initialized) {
+			p_mapping->dvo_port = p_child->dvo_port;
+			p_mapping->slave_addr = p_child->slave_addr;
+			p_mapping->dvo_wiring = p_child->dvo_wiring;
+			p_mapping->initialized = 1;
+		} else {
+			DRM_DEBUG("Maybe one SDVO port is shared by "
+					 "two SDVO device.\n");
+		}
+		if (p_child->slave2_addr) {
+			/* Maybe this is a SDVO device with multiple inputs */
+			/* And the mapping info is not added */
+			DRM_DEBUG("there exists the slave2_addr. Maybe this "
+				"is a SDVO device with multiple inputs.\n");
+		}
+		count++;
+	}
+
+	if (!count) {
+		/* No SDVO device info is found */
+		DRM_DEBUG("No SDVO device info is found in VBT\n");
+	}
+	return;
+}
 /**
  * intel_init_bios - initialize VBIOS settings & find VBT
  * @dev: DRM device
@@ -242,7 +326,7 @@ intel_init_bios(struct drm_device *dev)
 	parse_general_features(dev_priv, bdb);
 	parse_lfp_panel_data(dev_priv, bdb);
 	parse_sdvo_panel_data(dev_priv, bdb);
-
+	parse_sdvo_device_mapping(dev_priv, bdb);
 	pci_unmap_rom(pdev, bios);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 8ca2cde1580..fe72e1c225d 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -135,6 +135,86 @@ struct bdb_general_features {
 	u8 rsvd11:6; /* finish byte */
 } __attribute__((packed));
 
+/* pre-915 */
+#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
+#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
+#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
+#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
+
+/* Pre 915 */
+#define DEVICE_TYPE_NONE	0x00
+#define DEVICE_TYPE_CRT		0x01
+#define DEVICE_TYPE_TV		0x09
+#define DEVICE_TYPE_EFP		0x12
+#define DEVICE_TYPE_LFP		0x22
+/* On 915+ */
+#define DEVICE_TYPE_CRT_DPMS		0x6001
+#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
+#define DEVICE_TYPE_TV_COMPOSITE	0x0209
+#define DEVICE_TYPE_TV_MACROVISION	0x0289
+#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
+#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
+#define DEVICE_TYPE_TV_SCART		0x0209
+#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
+#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
+#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
+#define DEVICE_TYPE_EFP_DVI_I		0x6053
+#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
+#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
+#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
+#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
+#define DEVICE_TYPE_LFP_PANELLINK	0x5012
+#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
+#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
+#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
+#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
+
+#define DEVICE_CFG_NONE		0x00
+#define DEVICE_CFG_12BIT_DVOB	0x01
+#define DEVICE_CFG_12BIT_DVOC	0x02
+#define DEVICE_CFG_24BIT_DVOBC	0x09
+#define DEVICE_CFG_24BIT_DVOCB	0x0a
+#define DEVICE_CFG_DUAL_DVOB	0x11
+#define DEVICE_CFG_DUAL_DVOC	0x12
+#define DEVICE_CFG_DUAL_DVOBC	0x13
+#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
+#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
+
+#define DEVICE_WIRE_NONE	0x00
+#define DEVICE_WIRE_DVOB	0x01
+#define DEVICE_WIRE_DVOC	0x02
+#define DEVICE_WIRE_DVOBC	0x03
+#define DEVICE_WIRE_DVOBB	0x05
+#define DEVICE_WIRE_DVOCC	0x06
+#define DEVICE_WIRE_DVOB_MASTER 0x0d
+#define DEVICE_WIRE_DVOC_MASTER 0x0e
+
+#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
+#define DEVICE_PORT_DVOB	0x01
+#define DEVICE_PORT_DVOC	0x02
+
+struct child_device_config {
+	u16 handle;
+	u16 device_type;
+	u8  device_id[10]; /* See DEVICE_TYPE_* above */
+	u16 addin_offset;
+	u8  dvo_port; /* See Device_PORT_* above */
+	u8  i2c_pin;
+	u8  slave_addr;
+	u8  ddc_pin;
+	u16 edid_ptr;
+	u8  dvo_cfg; /* See DEVICE_CFG_* above */
+	u8  dvo2_port;
+	u8  i2c2_pin;
+	u8  slave2_addr;
+	u8  ddc2_pin;
+	u8  capabilities;
+	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
+	u8  dvo2_wiring;
+	u16 extended_type;
+	u8  dvo_function;
+} __attribute__((packed));
+
 struct bdb_general_definitions {
 	/* DDC GPIO */
 	u8 crt_ddc_gmbus_pin;
@@ -149,14 +229,19 @@ struct bdb_general_definitions {
 	u8 boot_display[2];
 	u8 child_dev_size;
 
-	/* device info */
-	u8 tv_or_lvds_info[33];
-	u8 dev1[33];
-	u8 dev2[33];
-	u8 dev3[33];
-	u8 dev4[33];
-	/* may be another device block here on some platforms */
-};
+	/*
+	 * Device info:
+	 * If TV is present, it'll be at devices[0].
+	 * LVDS will be next, either devices[0] or [1], if present.
+	 * On some platforms the number of device is 6. But could be as few as
+	 * 4 if both TV and LVDS are missing.
+	 * And the device num is related with the size of general definition
+	 * block. It is obtained by using the following formula:
+	 * number = (block_size - sizeof(bdb_general_definitions))/
+	 * 		sizeof(child_device_config);
+	 */
+	struct child_device_config devices[0];
+} __attribute__((packed));
 
 struct bdb_lvds_options {
 	u8 panel_type;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 79acc4f4c1f..6de97fc6602 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -37,9 +37,14 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 temp;
+	u32 temp, reg;
 
-	temp = I915_READ(ADPA);
+	if (IS_IGDNG(dev))
+		reg = PCH_ADPA;
+	else
+		reg = ADPA;
+
+	temp = I915_READ(reg);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp |= ADPA_DAC_ENABLE;
 
@@ -58,7 +63,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 		break;
 	}
 
-	I915_WRITE(ADPA, temp);
+	I915_WRITE(reg, temp);
 }
 
 static int intel_crt_mode_valid(struct drm_connector *connector,
@@ -101,17 +106,23 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int dpll_md_reg;
 	u32 adpa, dpll_md;
+	u32 adpa_reg;
 
 	if (intel_crtc->pipe == 0)
 		dpll_md_reg = DPLL_A_MD;
 	else
 		dpll_md_reg = DPLL_B_MD;
 
+	if (IS_IGDNG(dev))
+		adpa_reg = PCH_ADPA;
+	else
+		adpa_reg = ADPA;
+
 	/*
 	 * Disable separate mode multiplier used when cloning SDVO to CRT
 	 * XXX this needs to be adjusted when we really are cloning
 	 */
-	if (IS_I965G(dev)) {
+	if (IS_I965G(dev) && !IS_IGDNG(dev)) {
 		dpll_md = I915_READ(dpll_md_reg);
 		I915_WRITE(dpll_md_reg,
 			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
@@ -125,13 +136,53 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 
 	if (intel_crtc->pipe == 0) {
 		adpa |= ADPA_PIPE_A_SELECT;
-		I915_WRITE(BCLRPAT_A, 0);
+		if (!IS_IGDNG(dev))
+			I915_WRITE(BCLRPAT_A, 0);
 	} else {
 		adpa |= ADPA_PIPE_B_SELECT;
-		I915_WRITE(BCLRPAT_B, 0);
+		if (!IS_IGDNG(dev))
+			I915_WRITE(BCLRPAT_B, 0);
 	}
 
-	I915_WRITE(ADPA, adpa);
+	I915_WRITE(adpa_reg, adpa);
+}
+
+static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 adpa, temp;
+	bool ret;
+
+	temp = adpa = I915_READ(PCH_ADPA);
+
+	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+
+	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
+			ADPA_CRT_HOTPLUG_WARMUP_10MS |
+			ADPA_CRT_HOTPLUG_SAMPLE_4S |
+			ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
+			ADPA_CRT_HOTPLUG_VOLREF_325MV |
+			ADPA_CRT_HOTPLUG_ENABLE |
+			ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
+
+	DRM_DEBUG("pch crt adpa 0x%x", adpa);
+	I915_WRITE(PCH_ADPA, adpa);
+
+	/* This might not be needed as not specified in spec...*/
+	udelay(1000);
+
+	/* Check the status to see if both blue and green are on now */
+	adpa = I915_READ(PCH_ADPA);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) ==
+			ADPA_CRT_HOTPLUG_MONITOR_COLOR)
+		ret = true;
+	else
+		ret = false;
+
+	/* restore origin register */
+	I915_WRITE(PCH_ADPA, temp);
+	return ret;
 }
 
 /**
@@ -148,6 +199,10 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 hotplug_en;
 	int i, tries = 0;
+
+	if (IS_IGDNG(dev))
+		return intel_igdng_crt_detect_hotplug(connector);
+
 	/*
 	 * On 4 series desktop, CRT detect sequence need to be done twice
 	 * to get a reliable result.
@@ -423,6 +478,7 @@ void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
+	u32 i2c_reg;
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output)
@@ -439,7 +495,11 @@ void intel_crt_init(struct drm_device *dev)
 					  &intel_output->enc);
 
 	/* Set up the DDC bus. */
-	intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+	if (IS_IGDNG(dev))
+		i2c_reg = PCH_GPIOA;
+	else
+		i2c_reg = GPIOA;
+	intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
 	if (!intel_output->ddc_bus) {
 		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
 			   "failed.\n");
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c9d6f10ba92..028f5b66e3d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -137,6 +137,8 @@ struct intel_limit {
 #define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS   7
 #define INTEL_LIMIT_IGD_SDVO_DAC    8
 #define INTEL_LIMIT_IGD_LVDS	    9
+#define INTEL_LIMIT_IGDNG_SDVO_DAC  10
+#define INTEL_LIMIT_IGDNG_LVDS	    11
 
 /*The parameter is for SDVO on G4x platform*/
 #define G4X_DOT_SDVO_MIN           25000
@@ -216,12 +218,43 @@ struct intel_limit {
 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 
+/* IGDNG */
+/* as we calculate clock using (register_value + 2) for
+   N/M1/M2, so here the range value for them is (actual_value-2).
+ */
+#define IGDNG_DOT_MIN         25000
+#define IGDNG_DOT_MAX         350000
+#define IGDNG_VCO_MIN         1760000
+#define IGDNG_VCO_MAX         3510000
+#define IGDNG_N_MIN           1
+#define IGDNG_N_MAX           5
+#define IGDNG_M_MIN           79
+#define IGDNG_M_MAX           118
+#define IGDNG_M1_MIN          12
+#define IGDNG_M1_MAX          23
+#define IGDNG_M2_MIN          5
+#define IGDNG_M2_MAX          9
+#define IGDNG_P_SDVO_DAC_MIN  5
+#define IGDNG_P_SDVO_DAC_MAX  80
+#define IGDNG_P_LVDS_MIN      28
+#define IGDNG_P_LVDS_MAX      112
+#define IGDNG_P1_MIN          1
+#define IGDNG_P1_MAX          8
+#define IGDNG_P2_SDVO_DAC_SLOW 10
+#define IGDNG_P2_SDVO_DAC_FAST 5
+#define IGDNG_P2_LVDS_SLOW    14 /* single channel */
+#define IGDNG_P2_LVDS_FAST    7  /* double channel */
+#define IGDNG_P2_DOT_LIMIT    225000 /* 225Mhz */
+
 static bool
 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		    int target, int refclk, intel_clock_t *best_clock);
 static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *best_clock);
 
 static const intel_limit_t intel_limits[] = {
     { /* INTEL_LIMIT_I8XX_DVO_DAC */
@@ -383,9 +416,47 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
     },
-
+    { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
+	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
+	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
+	.m   = { .min = IGDNG_M_MIN,            .max = IGDNG_M_MAX },
+	.m1  = { .min = IGDNG_M1_MIN,           .max = IGDNG_M1_MAX },
+	.m2  = { .min = IGDNG_M2_MIN,           .max = IGDNG_M2_MAX },
+	.p   = { .min = IGDNG_P_SDVO_DAC_MIN,   .max = IGDNG_P_SDVO_DAC_MAX },
+	.p1  = { .min = IGDNG_P1_MIN,           .max = IGDNG_P1_MAX },
+	.p2  = { .dot_limit = IGDNG_P2_DOT_LIMIT,
+		 .p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
+		 .p2_fast = IGDNG_P2_SDVO_DAC_FAST },
+	.find_pll = intel_igdng_find_best_PLL,
+    },
+    { /* INTEL_LIMIT_IGDNG_LVDS */
+	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
+	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
+	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
+	.m   = { .min = IGDNG_M_MIN,            .max = IGDNG_M_MAX },
+	.m1  = { .min = IGDNG_M1_MIN,           .max = IGDNG_M1_MAX },
+	.m2  = { .min = IGDNG_M2_MIN,           .max = IGDNG_M2_MAX },
+	.p   = { .min = IGDNG_P_LVDS_MIN,       .max = IGDNG_P_LVDS_MAX },
+	.p1  = { .min = IGDNG_P1_MIN,           .max = IGDNG_P1_MAX },
+	.p2  = { .dot_limit = IGDNG_P2_DOT_LIMIT,
+		 .p2_slow = IGDNG_P2_LVDS_SLOW,
+		 .p2_fast = IGDNG_P2_LVDS_FAST },
+	.find_pll = intel_igdng_find_best_PLL,
+    },
 };
 
+static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
+{
+	const intel_limit_t *limit;
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+		limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+	else
+		limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+
+	return limit;
+}
+
 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -418,7 +489,9 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	const intel_limit_t *limit;
 
-	if (IS_G4X(dev)) {
+	if (IS_IGDNG(dev))
+		limit = intel_igdng_limit(crtc);
+	else if (IS_G4X(dev)) {
 		limit = intel_g4x_limit(crtc);
 	} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
@@ -630,7 +703,64 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			}
 		}
 	}
+	return found;
+}
 
+static bool
+intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	int max_n;
+	bool found;
+	int err_most = 47;
+	found = false;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+	max_n = limit->n.max;
+	/* based on hardware requriment prefer smaller n to precision */
+	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		/* based on hardware requirment prefere larger m1,m2, p1 */
+		for (clock.m1 = limit->m1.max;
+		     clock.m1 >= limit->m1.min; clock.m1--) {
+			for (clock.m2 = limit->m2.max;
+			     clock.m2 >= limit->m2.min; clock.m2--) {
+				for (clock.p1 = limit->p1.max;
+				     clock.p1 >= limit->p1.min; clock.p1--) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+					if (!intel_PLL_is_valid(crtc, &clock))
+						continue;
+					this_err = abs((10000 - (target*10000/clock.dot)));
+					if (this_err < err_most) {
+						*best_clock = clock;
+						err_most = this_err;
+						max_n = clock.n;
+						found = true;
+						/* found on first matching */
+						goto out;
+					}
+				}
+			}
+		}
+	}
+out:
 	return found;
 }
 
@@ -785,18 +915,292 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	return 0;
 }
 
+static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->pipe;
+	int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
+	int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
+	int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
+	int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
+	int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
+	int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
+	int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+	int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B;
+	int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B;
+	int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B;
+	int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B;
+	int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
+	int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
+	u32 temp;
+	int tries = 5, j;
 
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		DRM_DEBUG("crtc %d dpms on\n", pipe);
+		/* enable PCH DPLL */
+		temp = I915_READ(pch_dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+			I915_READ(pch_dpll_reg);
+		}
 
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+		/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+		temp = I915_READ(fdi_rx_reg);
+		I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+				FDI_SEL_PCDCLK |
+				FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+		I915_READ(fdi_rx_reg);
+		udelay(200);
+
+		/* Enable CPU FDI TX PLL, always on for IGDNG */
+		temp = I915_READ(fdi_tx_reg);
+		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+			I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+			I915_READ(fdi_tx_reg);
+			udelay(100);
+		}
+
+		/* Enable CPU pipe */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+			I915_READ(pipeconf_reg);
+			udelay(100);
+		}
+
+		/* configure and enable CPU plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+		}
+
+		/* enable CPU FDI TX and PCH FDI RX */
+		temp = I915_READ(fdi_tx_reg);
+		temp |= FDI_TX_ENABLE;
+		temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_tx_reg, temp);
+		I915_READ(fdi_tx_reg);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+		I915_READ(fdi_rx_reg);
+
+		udelay(150);
+
+		/* Train FDI. */
+		/* umask FDI RX Interrupt symbol_lock and bit_lock bit
+		   for train result */
+		temp = I915_READ(fdi_rx_imr_reg);
+		temp &= ~FDI_RX_SYMBOL_LOCK;
+		temp &= ~FDI_RX_BIT_LOCK;
+		I915_WRITE(fdi_rx_imr_reg, temp);
+		I915_READ(fdi_rx_imr_reg);
+		udelay(150);
+
+		temp = I915_READ(fdi_rx_iir_reg);
+		DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_BIT_LOCK) == 0) {
+			for (j = 0; j < tries; j++) {
+				temp = I915_READ(fdi_rx_iir_reg);
+				DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+				if (temp & FDI_RX_BIT_LOCK)
+					break;
+				udelay(200);
+			}
+			if (j != tries)
+				I915_WRITE(fdi_rx_iir_reg,
+						temp | FDI_RX_BIT_LOCK);
+			else
+				DRM_DEBUG("train 1 fail\n");
+		} else {
+			I915_WRITE(fdi_rx_iir_reg,
+					temp | FDI_RX_BIT_LOCK);
+			DRM_DEBUG("train 1 ok 2!\n");
+		}
+		temp = I915_READ(fdi_tx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+		I915_WRITE(fdi_tx_reg, temp);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+		I915_WRITE(fdi_rx_reg, temp);
+
+		udelay(150);
+
+		temp = I915_READ(fdi_rx_iir_reg);
+		DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+			for (j = 0; j < tries; j++) {
+				temp = I915_READ(fdi_rx_iir_reg);
+				DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+				if (temp & FDI_RX_SYMBOL_LOCK)
+					break;
+				udelay(200);
+			}
+			if (j != tries) {
+				I915_WRITE(fdi_rx_iir_reg,
+						temp | FDI_RX_SYMBOL_LOCK);
+				DRM_DEBUG("train 2 ok 1!\n");
+			} else
+				DRM_DEBUG("train 2 fail\n");
+		} else {
+			I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG("train 2 ok 2!\n");
+		}
+		DRM_DEBUG("train done\n");
+
+		/* set transcoder timing */
+		I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+		I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+		I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+
+		I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+		I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+		I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+
+		/* enable PCH transcoder */
+		temp = I915_READ(transconf_reg);
+		I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+		I915_READ(transconf_reg);
+
+		while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+			;
+
+		/* enable normal */
+
+		temp = I915_READ(fdi_tx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+				FDI_TX_ENHANCE_FRAME_ENABLE);
+		I915_READ(fdi_tx_reg);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+				FDI_RX_ENHANCE_FRAME_ENABLE);
+		I915_READ(fdi_rx_reg);
+
+		/* wait one idle pattern time */
+		udelay(100);
+
+		intel_crtc_load_lut(crtc);
+
+	break;
+	case DRM_MODE_DPMS_OFF:
+		DRM_DEBUG("crtc %d dpms off\n", pipe);
+
+		/* Disable the VGA plane that we never use */
+		I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Disable display plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+			I915_READ(dspbase_reg);
+		}
+
+		/* disable cpu pipe, disable after all planes disabled */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			I915_READ(pipeconf_reg);
+			/* wait for cpu pipe off, pipe state */
+			while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
+				;
+		} else
+			DRM_DEBUG("crtc %d is disabled\n", pipe);
+
+		/* IGDNG-A : disable cpu panel fitter ? */
+		temp = I915_READ(pf_ctl_reg);
+		if ((temp & PF_ENABLE) != 0) {
+			I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+			I915_READ(pf_ctl_reg);
+		}
+
+		/* disable CPU FDI tx and PCH FDI rx */
+		temp = I915_READ(fdi_tx_reg);
+		I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
+		I915_READ(fdi_tx_reg);
+
+		temp = I915_READ(fdi_rx_reg);
+		I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
+		I915_READ(fdi_rx_reg);
+
+		/* still set train pattern 1 */
+		temp = I915_READ(fdi_tx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_tx_reg, temp);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_rx_reg, temp);
+
+		/* disable PCH transcoder */
+		temp = I915_READ(transconf_reg);
+		if ((temp & TRANS_ENABLE) != 0) {
+			I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
+			I915_READ(transconf_reg);
+			/* wait for PCH transcoder off, transcoder state */
+			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
+				;
+		}
+
+		/* disable PCH DPLL */
+		temp = I915_READ(pch_dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			I915_READ(pch_dpll_reg);
+		}
+
+		temp = I915_READ(fdi_rx_reg);
+		if ((temp & FDI_RX_PLL_ENABLE) != 0) {
+			temp &= ~FDI_SEL_PCDCLK;
+			temp &= ~FDI_RX_PLL_ENABLE;
+			I915_WRITE(fdi_rx_reg, temp);
+			I915_READ(fdi_rx_reg);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+}
+
+static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_master_private *master_priv;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
@@ -805,7 +1209,6 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR;
 	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
 	u32 temp;
-	bool enabled;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -890,6 +1293,26 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 		udelay(150);
 		break;
 	}
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_master_private *master_priv;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool enabled;
+
+	if (IS_IGDNG(dev))
+		igdng_crtc_dpms(crtc, mode);
+	else
+		i9xx_crtc_dpms(crtc, mode);
 
 	if (!dev->primary->master)
 		return;
@@ -947,6 +1370,12 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
 {
+	struct drm_device *dev = crtc->dev;
+	if (IS_IGDNG(dev)) {
+		/* FDI link clock is fixed at 2.7G */
+		if (mode->clock * 3 > 27000 * 4)
+			return MODE_CLOCK_HIGH;
+	}
 	return true;
 }
 
@@ -1030,6 +1459,48 @@ static int intel_panel_fitter_pipe (struct drm_device *dev)
 	return 1;
 }
 
+struct fdi_m_n {
+	u32        tu;
+	u32        gmch_m;
+	u32        gmch_n;
+	u32        link_m;
+	u32        link_n;
+};
+
+static void
+fdi_reduce_ratio(u32 *num, u32 *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+#define DATA_N 0x800000
+#define LINK_N 0x80000
+
+static void
+igdng_compute_m_n(int bytes_per_pixel, int nlanes,
+		int pixel_clock, int link_clock,
+		struct fdi_m_n *m_n)
+{
+	u64 temp;
+
+	m_n->tu = 64; /* default size */
+
+	temp = (u64) DATA_N * pixel_clock;
+	temp = div_u64(temp, link_clock);
+	m_n->gmch_m = (temp * bytes_per_pixel) / nlanes;
+	m_n->gmch_n = DATA_N;
+	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+
+	temp = (u64) LINK_N * pixel_clock;
+	m_n->link_m = div_u64(temp, link_clock);
+	m_n->link_n = LINK_N;
+	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
@@ -1063,6 +1534,17 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	struct drm_connector *connector;
 	const intel_limit_t *limit;
 	int ret;
+	struct fdi_m_n m_n = {0};
+	int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1;
+	int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1;
+	int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1;
+	int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1;
+	int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0;
+	int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
+	int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
+	int lvds_reg = LVDS;
+	u32 temp;
+	int sdvo_pixel_multiply;
 
 	drm_vblank_pre_modeset(dev, pipe);
 
@@ -1101,6 +1583,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
 	} else if (IS_I9XX(dev)) {
 		refclk = 96000;
+		if (IS_IGDNG(dev))
+			refclk = 120000; /* 120Mhz refclk */
 	} else {
 		refclk = 48000;
 	}
@@ -1114,6 +1598,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
 	if (!ok) {
 		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		drm_vblank_post_modeset(dev, pipe);
 		return -EINVAL;
 	}
 
@@ -1137,12 +1622,21 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		}
 	}
 
+	/* FDI link */
+	if (IS_IGDNG(dev))
+		igdng_compute_m_n(3, 4, /* lane num 4 */
+				adjusted_mode->clock,
+				270000, /* lane clock */
+				&m_n);
+
 	if (IS_IGD(dev))
 		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
 	else
 		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
 
-	dpll = DPLL_VGA_MODE_DIS;
+	if (!IS_IGDNG(dev))
+		dpll = DPLL_VGA_MODE_DIS;
+
 	if (IS_I9XX(dev)) {
 		if (is_lvds)
 			dpll |= DPLLB_MODE_LVDS;
@@ -1150,17 +1644,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			dpll |= DPLLB_MODE_DAC_SERIAL;
 		if (is_sdvo) {
 			dpll |= DPLL_DVO_HIGH_SPEED;
-			if (IS_I945G(dev) || IS_I945GM(dev)) {
-				int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+			sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+			if (IS_I945G(dev) || IS_I945GM(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
-			}
+			else if (IS_IGDNG(dev))
+				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
 
 		/* compute bitmask from p1 value */
 		if (IS_IGD(dev))
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_IGD;
-		else
+		else {
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			/* also FPA1 */
+			if (IS_IGDNG(dev))
+				dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+		}
 		switch (clock.p2) {
 		case 5:
 			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
@@ -1175,7 +1674,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
 			break;
 		}
-		if (IS_I965G(dev))
+		if (IS_I965G(dev) && !IS_IGDNG(dev))
 			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 	} else {
 		if (is_lvds) {
@@ -1207,10 +1706,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
-	if (pipe == 0)
-		dspcntr |= DISPPLANE_SEL_PIPE_A;
-	else
-		dspcntr |= DISPPLANE_SEL_PIPE_B;
+	/* IGDNG's plane is forced to pipe, bit 24 is to
+	   enable color space conversion */
+	if (!IS_IGDNG(dev)) {
+		if (pipe == 0)
+			dspcntr |= DISPPLANE_SEL_PIPE_A;
+		else
+			dspcntr |= DISPPLANE_SEL_PIPE_B;
+	}
 
 	if (pipe == 0 && !IS_I965G(dev)) {
 		/* Enable pixel doubling when the dot clock is > 90% of the (display)
@@ -1231,12 +1734,17 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 
 	/* Disable the panel fitter if it was on our pipe */
-	if (intel_panel_fitter_pipe(dev) == pipe)
+	if (!IS_IGDNG(dev) && intel_panel_fitter_pipe(dev) == pipe)
 		I915_WRITE(PFIT_CONTROL, 0);
 
 	DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
 	drm_mode_debug_printmodeline(mode);
 
+	/* assign to IGDNG registers */
+	if (IS_IGDNG(dev)) {
+		fp_reg = pch_fp_reg;
+		dpll_reg = pch_dpll_reg;
+	}
 
 	if (dpll & DPLL_VCO_ENABLE) {
 		I915_WRITE(fp_reg, fp);
@@ -1245,13 +1753,33 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		udelay(150);
 	}
 
+	if (IS_IGDNG(dev)) {
+		/* enable PCH clock reference source */
+		/* XXX need to change the setting for other outputs */
+		u32 temp;
+		temp = I915_READ(PCH_DREF_CONTROL);
+		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+		temp |= DREF_NONSPREAD_CK505_ENABLE;
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_ENABLE;
+		temp &= ~DREF_SSC1_ENABLE;
+		/* if no eDP, disable source output to CPU */
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+	}
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
 	 */
 	if (is_lvds) {
-		u32 lvds = I915_READ(LVDS);
+		u32 lvds;
 
+		if (IS_IGDNG(dev))
+			lvds_reg = PCH_LVDS;
+
+		lvds = I915_READ(lvds_reg);
 		lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
 		/* Set the B0-B3 data pairs corresponding to whether we're going to
 		 * set the DPLLs for dual-channel mode or not.
@@ -1266,8 +1794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		 * panels behave in the two modes.
 		 */
 
-		I915_WRITE(LVDS, lvds);
-		I915_READ(LVDS);
+		I915_WRITE(lvds_reg, lvds);
+		I915_READ(lvds_reg);
 	}
 
 	I915_WRITE(fp_reg, fp);
@@ -1276,8 +1804,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* Wait for the clocks to stabilize. */
 	udelay(150);
 
-	if (IS_I965G(dev)) {
-		int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+	if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+		sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
 		I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
 			   ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
 	} else {
@@ -1303,9 +1831,25 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* pipesrc and dspsize control the size that is scaled from, which should
 	 * always be the user's requested size.
 	 */
-	I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
-	I915_WRITE(dsppos_reg, 0);
+	if (!IS_IGDNG(dev)) {
+		I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) |
+				(mode->hdisplay - 1));
+		I915_WRITE(dsppos_reg, 0);
+	}
 	I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	if (IS_IGDNG(dev)) {
+		I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m);
+		I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n);
+		I915_WRITE(link_m1_reg, m_n.link_m);
+		I915_WRITE(link_n1_reg, m_n.link_n);
+
+		 /* enable FDI RX PLL too */
+		temp = I915_READ(fdi_rx_reg);
+		I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+		udelay(200);
+	}
+
 	I915_WRITE(pipeconf_reg, pipeconf);
 	I915_READ(pipeconf_reg);
 
@@ -1315,12 +1859,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Flush the plane changes */
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
-	if (ret != 0)
-	    return ret;
-
 	drm_vblank_post_modeset(dev, pipe);
 
-	return 0;
+	return ret;
 }
 
 /** Loads the palette/gamma unit for the CRTC with the prepared values */
@@ -1336,6 +1877,11 @@ void intel_crtc_load_lut(struct drm_crtc *crtc)
 	if (!crtc->enabled)
 		return;
 
+	/* use legacy palette for IGDNG */
+	if (IS_IGDNG(dev))
+		palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A :
+						   LGC_PALETTE_B;
+
 	for (i = 0; i < 256; i++) {
 		I915_WRITE(palreg + 4 * i,
 			   (intel_crtc->lut_r[i] << 16) |
@@ -1464,16 +2010,16 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 	uint32_t adder;
 
 	if (x < 0) {
-		temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+		temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
 		x = -x;
 	}
 	if (y < 0) {
-		temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+		temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
 		y = -y;
 	}
 
-	temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
-	temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+	temp |= x << CURSOR_X_SHIFT;
+	temp |= y << CURSOR_Y_SHIFT;
 
 	adder = intel_crtc->cursor_addr;
 	I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
@@ -1590,6 +2136,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
 	}
 
 	encoder->crtc = crtc;
+	intel_output->base.encoder = encoder;
 	intel_output->load_detect_temp = true;
 
 	intel_crtc = to_intel_crtc(crtc);
@@ -1625,6 +2172,7 @@ void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_
 
 	if (intel_output->load_detect_temp) {
 		encoder->crtc = NULL;
+		intel_output->base.encoder = NULL;
 		intel_output->load_detect_temp = false;
 		crtc->enabled = drm_helper_crtc_in_use(crtc);
 		drm_helper_disable_unused_functions(dev);
@@ -1762,6 +2310,8 @@ static void intel_crtc_destroy(struct drm_crtc *crtc)
 {
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 
+	if (intel_crtc->mode_set.mode)
+		drm_mode_destroy(crtc->dev, intel_crtc->mode_set.mode);
 	drm_crtc_cleanup(crtc);
 	kfree(intel_crtc);
 }
@@ -1888,7 +2438,24 @@ static void intel_setup_outputs(struct drm_device *dev)
 	if (IS_MOBILE(dev) && !IS_I830(dev))
 		intel_lvds_init(dev);
 
-	if (IS_I9XX(dev)) {
+	if (IS_IGDNG(dev)) {
+		int found;
+
+		if (I915_READ(HDMIB) & PORT_DETECTED) {
+			/* check SDVOB */
+			/* found = intel_sdvo_init(dev, HDMIB); */
+			found = 0;
+			if (!found)
+				intel_hdmi_init(dev, HDMIB);
+		}
+
+		if (I915_READ(HDMIC) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMIC);
+
+		if (I915_READ(HDMID) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMID);
+
+	} else if (IS_I9XX(dev)) {
 		int found;
 		u32 reg;
 
@@ -1912,7 +2479,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 	} else
 		intel_dvo_init(dev);
 
-	if (IS_I9XX(dev) && IS_MOBILE(dev))
+	if (IS_I9XX(dev) && IS_MOBILE(dev) && !IS_IGDNG(dev))
 		intel_tv_init(dev);
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index e4652dcdd9b..0ecf6b76a40 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -207,7 +207,7 @@ static int intelfb_set_par(struct fb_info *info)
 
 	if (var->pixclock != -1) {
 
-		DRM_ERROR("PIXEL CLCOK SET\n");
+		DRM_ERROR("PIXEL CLOCK SET\n");
 		return -EINVAL;
 	} else {
 		struct drm_crtc *crtc;
@@ -674,8 +674,12 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *
 	par->crtc_ids[0] = crtc->base.id;
 
 	modeset->num_connectors = conn_count;
-	if (modeset->mode != modeset->crtc->desired_mode)
-		modeset->mode = modeset->crtc->desired_mode;
+	if (modeset->crtc->desired_mode) {
+		if (modeset->mode)
+			drm_mode_destroy(dev, modeset->mode);
+		modeset->mode = drm_mode_duplicate(dev,
+						   modeset->crtc->desired_mode);
+	}
 
 	par->crtc_count = 1;
 
@@ -824,8 +828,12 @@ static int intelfb_single_fb_probe(struct drm_device *dev)
 		par->crtc_ids[crtc_count++] = crtc->base.id;
 
 		modeset->num_connectors = conn_count;
-		if (modeset->mode != modeset->crtc->desired_mode)
-			modeset->mode = modeset->crtc->desired_mode;
+		if (modeset->crtc->desired_mode) {
+			if (modeset->mode)
+				drm_mode_destroy(dev, modeset->mode);
+			modeset->mode = drm_mode_duplicate(dev,
+							   modeset->crtc->desired_mode);
+		}
 	}
 	par->crtc_count = crtc_count;
 
@@ -857,9 +865,15 @@ void intelfb_restore(void)
 	drm_crtc_helper_set_config(&kernelfb_mode);
 }
 
+static void intelfb_restore_work_fn(struct work_struct *ignored)
+{
+	intelfb_restore();
+}
+static DECLARE_WORK(intelfb_restore_work, intelfb_restore_work_fn);
+
 static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
 {
-        intelfb_restore();
+        schedule_work(&intelfb_restore_work);
 }
 
 static struct sysrq_key_op sysrq_intelfb_restore_op = {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 7d6bdd70532..4ea2a651b92 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -56,7 +56,8 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	sdvox = SDVO_ENCODING_HDMI |
 		SDVO_BORDER_ENABLE |
 		SDVO_VSYNC_ACTIVE_HIGH |
-		SDVO_HSYNC_ACTIVE_HIGH;
+		SDVO_HSYNC_ACTIVE_HIGH |
+		SDVO_NULL_PACKETS_DURING_VSYNC;
 
 	if (hdmi_priv->has_hdmi_sink)
 		sdvox |= SDVO_AUDIO_ENABLE;
@@ -145,6 +146,22 @@ intel_hdmi_sink_detect(struct drm_connector *connector)
 }
 
 static enum drm_connector_status
+igdng_hdmi_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+
+	/* FIXME hotplug detect */
+
+	hdmi_priv->has_hdmi_sink = false;
+	intel_hdmi_sink_detect(connector);
+	if (hdmi_priv->has_hdmi_sink)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static enum drm_connector_status
 intel_hdmi_detect(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
@@ -153,6 +170,9 @@ intel_hdmi_detect(struct drm_connector *connector)
 	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
 	u32 temp, bit;
 
+	if (IS_IGDNG(dev))
+		return igdng_hdmi_detect(connector);
+
 	temp = I915_READ(PORT_HOTPLUG_EN);
 
 	switch (hdmi_priv->sdvox_reg) {
@@ -269,8 +289,17 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 	/* Set up the DDC bus. */
 	if (sdvox_reg == SDVOB)
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
-	else
+	else if (sdvox_reg == SDVOC)
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+	else if (sdvox_reg == HDMIB)
+		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
+								"HDMIB");
+	else if (sdvox_reg == HDMIC)
+		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
+								"HDMIC");
+	else if (sdvox_reg == HDMID)
+		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
+								"HDMID");
 
 	if (!intel_output->ddc_bus)
 		goto err_connector;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 53cccfa58b9..f073ed8432e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -37,6 +37,8 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+#define I915_LVDS "i915_lvds"
+
 /**
  * Sets the backlight level.
  *
@@ -45,10 +47,15 @@
 static void intel_lvds_set_backlight(struct drm_device *dev, int level)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 blc_pwm_ctl;
+	u32 blc_pwm_ctl, reg;
+
+	if (IS_IGDNG(dev))
+		reg = BLC_PWM_CPU_CTL;
+	else
+		reg = BLC_PWM_CTL;
 
-	blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
-	I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
+	blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+	I915_WRITE(reg, (blc_pwm_ctl |
 				 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
 }
 
@@ -58,8 +65,14 @@ static void intel_lvds_set_backlight(struct drm_device *dev, int level)
 static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+
+	if (IS_IGDNG(dev))
+		reg = BLC_PWM_PCH_CTL2;
+	else
+		reg = BLC_PWM_CTL;
 
-	return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
+	return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >>
 		BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
 }
 
@@ -69,23 +82,31 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
 static void intel_lvds_set_power(struct drm_device *dev, bool on)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp_status;
+	u32 pp_status, ctl_reg, status_reg;
+
+	if (IS_IGDNG(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		status_reg = PCH_PP_STATUS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		status_reg = PP_STATUS;
+	}
 
 	if (on) {
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+		I915_WRITE(ctl_reg, I915_READ(ctl_reg) |
 			   POWER_TARGET_ON);
 		do {
-			pp_status = I915_READ(PP_STATUS);
+			pp_status = I915_READ(status_reg);
 		} while ((pp_status & PP_ON) == 0);
 
 		intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
 	} else {
 		intel_lvds_set_backlight(dev, 0);
 
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
+		I915_WRITE(ctl_reg, I915_READ(ctl_reg) &
 			   ~POWER_TARGET_ON);
 		do {
-			pp_status = I915_READ(PP_STATUS);
+			pp_status = I915_READ(status_reg);
 		} while (pp_status & PP_ON);
 	}
 }
@@ -106,12 +127,28 @@ static void intel_lvds_save(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg;
+	u32 pwm_ctl_reg;
+
+	if (IS_IGDNG(dev)) {
+		pp_on_reg = PCH_PP_ON_DELAYS;
+		pp_off_reg = PCH_PP_OFF_DELAYS;
+		pp_ctl_reg = PCH_PP_CONTROL;
+		pp_div_reg = PCH_PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CPU_CTL;
+	} else {
+		pp_on_reg = PP_ON_DELAYS;
+		pp_off_reg = PP_OFF_DELAYS;
+		pp_ctl_reg = PP_CONTROL;
+		pp_div_reg = PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CTL;
+	}
 
-	dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
-	dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
-	dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
-	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
-	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->savePP_ON = I915_READ(pp_on_reg);
+	dev_priv->savePP_OFF = I915_READ(pp_off_reg);
+	dev_priv->savePP_CONTROL = I915_READ(pp_ctl_reg);
+	dev_priv->savePP_DIVISOR = I915_READ(pp_div_reg);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(pwm_ctl_reg);
 	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
 				       BACKLIGHT_DUTY_CYCLE_MASK);
 
@@ -127,12 +164,28 @@ static void intel_lvds_restore(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg;
+	u32 pwm_ctl_reg;
+
+	if (IS_IGDNG(dev)) {
+		pp_on_reg = PCH_PP_ON_DELAYS;
+		pp_off_reg = PCH_PP_OFF_DELAYS;
+		pp_ctl_reg = PCH_PP_CONTROL;
+		pp_div_reg = PCH_PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CPU_CTL;
+	} else {
+		pp_on_reg = PP_ON_DELAYS;
+		pp_off_reg = PP_OFF_DELAYS;
+		pp_ctl_reg = PP_CONTROL;
+		pp_div_reg = PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CTL;
+	}
 
-	I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
-	I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
-	I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
-	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
-	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+	I915_WRITE(pwm_ctl_reg, dev_priv->saveBLC_PWM_CTL);
+	I915_WRITE(pp_on_reg, dev_priv->savePP_ON);
+	I915_WRITE(pp_off_reg, dev_priv->savePP_OFF);
+	I915_WRITE(pp_div_reg, dev_priv->savePP_DIVISOR);
+	I915_WRITE(pp_ctl_reg, dev_priv->savePP_CONTROL);
 	if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
 		intel_lvds_set_power(dev, true);
 	else
@@ -216,8 +269,14 @@ static void intel_lvds_prepare(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+
+	if (IS_IGDNG(dev))
+		reg = BLC_PWM_CPU_CTL;
+	else
+		reg = BLC_PWM_CTL;
 
-	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(reg);
 	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
 				       BACKLIGHT_DUTY_CYCLE_MASK);
 
@@ -251,6 +310,10 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
 	 * settings.
 	 */
 
+	/* No panel fitting yet, fixme */
+	if (IS_IGDNG(dev))
+		return;
+
 	/*
 	 * Enable automatic panel scaling so that non-native modes fill the
 	 * screen.  Should be enabled before the pipe is enabled, according to
@@ -382,7 +445,8 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
 
 static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
 {
-	DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+	DRM_DEBUG_KMS(I915_LVDS,
+		      "Skipping LVDS initialization for %s\n", id->ident);
 	return 1;
 }
 
@@ -420,8 +484,21 @@ static const struct dmi_system_id intel_no_lvds[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
 		},
 	},
-
-	/* FIXME: add a check for the Aopen Mini PC */
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Aopen i945GTt-VFA",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+		},
+	},
 
 	{ }	/* terminating entry */
 };
@@ -442,12 +519,18 @@ void intel_lvds_init(struct drm_device *dev)
 	struct drm_display_mode *scan; /* *modes, *bios_mode; */
 	struct drm_crtc *crtc;
 	u32 lvds;
-	int pipe;
+	int pipe, gpio = GPIOC;
 
 	/* Skip init on machines we know falsely report LVDS */
 	if (dmi_check_system(intel_no_lvds))
 		return;
 
+	if (IS_IGDNG(dev)) {
+		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
+			return;
+		gpio = PCH_GPIOC;
+	}
+
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output) {
 		return;
@@ -482,7 +565,7 @@ void intel_lvds_init(struct drm_device *dev)
 	 */
 
 	/* Set up the DDC bus. */
-	intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
+	intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C");
 	if (!intel_output->ddc_bus) {
 		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
 			   "failed.\n");
@@ -524,6 +607,11 @@ void intel_lvds_init(struct drm_device *dev)
 	 * on.  If so, assume that whatever is currently programmed is the
 	 * correct mode.
 	 */
+
+	/* IGDNG: FIXME if still fail, not try pipe mode now */
+	if (IS_IGDNG(dev))
+		goto failed;
+
 	lvds = I915_READ(LVDS);
 	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
 	crtc = intel_get_crtc_from_pipe(dev, pipe);
@@ -542,11 +630,22 @@ void intel_lvds_init(struct drm_device *dev)
 		goto failed;
 
 out:
+	if (IS_IGDNG(dev)) {
+		u32 pwm;
+		/* make sure PWM is enabled */
+		pwm = I915_READ(BLC_PWM_CPU_CTL2);
+		pwm |= (PWM_ENABLE | PWM_PIPE_B);
+		I915_WRITE(BLC_PWM_CPU_CTL2, pwm);
+
+		pwm = I915_READ(BLC_PWM_PCH_CTL1);
+		pwm |= PWM_PCH_ENABLE;
+		I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
+	}
 	drm_sysfs_connector_add(connector);
 	return;
 
 failed:
-	DRM_DEBUG("No LVDS modes found, disabling.\n");
+	DRM_DEBUG_KMS(I915_LVDS, "No LVDS modes found, disabling.\n");
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 	drm_connector_cleanup(connector);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 3093b4d4a4d..9a00adb3a50 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -36,7 +36,7 @@
 #include "intel_sdvo_regs.h"
 
 #undef SDVO_DEBUG
-
+#define I915_SDVO	"i915_sdvo"
 struct intel_sdvo_priv {
 	struct intel_i2c_chan *i2c_bus;
 	int slaveaddr;
@@ -277,20 +277,21 @@ static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd,
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	int i;
 
-	printk(KERN_DEBUG "%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd);
+	DRM_DEBUG_KMS(I915_SDVO, "%s: W: %02X ",
+				SDVO_NAME(sdvo_priv), cmd);
 	for (i = 0; i < args_len; i++)
-		printk(KERN_DEBUG "%02X ", ((u8 *)args)[i]);
+		DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
 	for (; i < 8; i++)
-		printk(KERN_DEBUG "   ");
+		DRM_LOG_KMS("   ");
 	for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) {
 		if (cmd == sdvo_cmd_names[i].cmd) {
-			printk(KERN_DEBUG "(%s)", sdvo_cmd_names[i].name);
+			DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name);
 			break;
 		}
 	}
 	if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0]))
-		printk(KERN_DEBUG "(%02X)", cmd);
-	printk(KERN_DEBUG "\n");
+		DRM_LOG_KMS("(%02X)", cmd);
+	DRM_LOG_KMS("\n");
 }
 #else
 #define intel_sdvo_debug_write(o, c, a, l)
@@ -329,16 +330,16 @@ static void intel_sdvo_debug_response(struct intel_output *intel_output,
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	int i;
 
-	printk(KERN_DEBUG "%s: R: ", SDVO_NAME(sdvo_priv));
+	DRM_DEBUG_KMS(I915_SDVO, "%s: R: ", SDVO_NAME(sdvo_priv));
 	for (i = 0; i < response_len; i++)
-		printk(KERN_DEBUG "%02X ", ((u8 *)response)[i]);
+		DRM_LOG_KMS("%02X ", ((u8 *)response)[i]);
 	for (; i < 8; i++)
-		printk(KERN_DEBUG "   ");
+		DRM_LOG_KMS("   ");
 	if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
-		printk(KERN_DEBUG "(%s)", cmd_status_names[status]);
+		DRM_LOG_KMS("(%s)", cmd_status_names[status]);
 	else
-		printk(KERN_DEBUG "(??? %d)", status);
-	printk(KERN_DEBUG "\n");
+		DRM_LOG_KMS("(??? %d)", status);
+	DRM_LOG_KMS("\n");
 }
 #else
 #define intel_sdvo_debug_response(o, r, l, s)
@@ -1742,6 +1743,43 @@ static struct i2c_algorithm intel_sdvo_i2c_bit_algo = {
 	.master_xfer	= intel_sdvo_master_xfer,
 };
 
+static u8
+intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct sdvo_device_mapping *my_mapping, *other_mapping;
+
+	if (output_device == SDVOB) {
+		my_mapping = &dev_priv->sdvo_mappings[0];
+		other_mapping = &dev_priv->sdvo_mappings[1];
+	} else {
+		my_mapping = &dev_priv->sdvo_mappings[1];
+		other_mapping = &dev_priv->sdvo_mappings[0];
+	}
+
+	/* If the BIOS described our SDVO device, take advantage of it. */
+	if (my_mapping->slave_addr)
+		return my_mapping->slave_addr;
+
+	/* If the BIOS only described a different SDVO device, use the
+	 * address that it isn't using.
+	 */
+	if (other_mapping->slave_addr) {
+		if (other_mapping->slave_addr == 0x70)
+			return 0x72;
+		else
+			return 0x70;
+	}
+
+	/* No SDVO device info is found for another DVO port,
+	 * so use mapping assumption we had before BIOS parsing.
+	 */
+	if (output_device == SDVOB)
+		return 0x70;
+	else
+		return 0x72;
+}
+
 bool intel_sdvo_init(struct drm_device *dev, int output_device)
 {
 	struct drm_connector *connector;
@@ -1753,6 +1791,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	u8 ch[0x40];
 	int i;
 	int encoder_type, output_id;
+	u8 slave_addr;
 
 	intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
 	if (!intel_output) {
@@ -1771,16 +1810,15 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	if (!i2cbus)
 		goto err_inteloutput;
 
+	slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
 	sdvo_priv->i2c_bus = i2cbus;
 
 	if (output_device == SDVOB) {
 		output_id = 1;
-		sdvo_priv->i2c_bus->slave_addr = 0x38;
 	} else {
 		output_id = 2;
-		sdvo_priv->i2c_bus->slave_addr = 0x39;
 	}
-
+	sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
 	sdvo_priv->output_device = output_device;
 	intel_output->i2c_bus = i2cbus;
 	intel_output->dev_priv = sdvo_priv;
@@ -1788,8 +1826,9 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	/* Read the regs to test if we can talk to the device */
 	for (i = 0; i < 0x40; i++) {
 		if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
-			DRM_DEBUG("No SDVO device found on SDVO%c\n",
-				  output_device == SDVOB ? 'B' : 'C');
+			DRM_DEBUG_KMS(I915_SDVO,
+					"No SDVO device found on SDVO%c\n",
+					output_device == SDVOB ? 'B' : 'C');
 			goto err_i2c;
 		}
 	}
@@ -1873,9 +1912,10 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 
 		sdvo_priv->controlled_output = 0;
 		memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
-		DRM_DEBUG("%s: Unknown SDVO output type (0x%02x%02x)\n",
-			  SDVO_NAME(sdvo_priv),
-			  bytes[0], bytes[1]);
+		DRM_DEBUG_KMS(I915_SDVO,
+				"%s: Unknown SDVO output type (0x%02x%02x)\n",
+				  SDVO_NAME(sdvo_priv),
+				  bytes[0], bytes[1]);
 		encoder_type = DRM_MODE_ENCODER_NONE;
 		connector_type = DRM_MODE_CONNECTOR_Unknown;
 		goto err_i2c;
@@ -1905,21 +1945,21 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 					       &sdvo_priv->pixel_clock_max);
 
 
-	DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, "
-		  "clock range %dMHz - %dMHz, "
-		  "input 1: %c, input 2: %c, "
-		  "output 1: %c, output 2: %c\n",
-		  SDVO_NAME(sdvo_priv),
-		  sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
-		  sdvo_priv->caps.device_rev_id,
-		  sdvo_priv->pixel_clock_min / 1000,
-		  sdvo_priv->pixel_clock_max / 1000,
-		  (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
-		  (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
-		  /* check currently supported outputs */
-		  sdvo_priv->caps.output_flags &
+	DRM_DEBUG_KMS(I915_SDVO, "%s device VID/DID: %02X:%02X.%02X, "
+			"clock range %dMHz - %dMHz, "
+			"input 1: %c, input 2: %c, "
+			"output 1: %c, output 2: %c\n",
+			SDVO_NAME(sdvo_priv),
+			sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
+			sdvo_priv->caps.device_rev_id,
+			sdvo_priv->pixel_clock_min / 1000,
+			sdvo_priv->pixel_clock_max / 1000,
+			(sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
+			(sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
+			/* check currently supported outputs */
+			sdvo_priv->caps.output_flags &
 			(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
-		  sdvo_priv->caps.output_flags &
+			sdvo_priv->caps.output_flags &
 			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
 
 	return true;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 98ac0546b7b..50d7ed70b33 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1392,6 +1392,9 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output)
 		tv_ctl &= ~TV_TEST_MODE_MASK;
 		tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
 		tv_dac &= ~TVDAC_SENSE_MASK;
+		tv_dac &= ~DAC_A_MASK;
+		tv_dac &= ~DAC_B_MASK;
+		tv_dac &= ~DAC_C_MASK;
 		tv_dac |= (TVDAC_STATE_CHG_EN |
 			   TVDAC_A_SENSE_CTL |
 			   TVDAC_B_SENSE_CTL |
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index bc9d09dfa8e..146f3570af8 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -478,26 +478,27 @@ static void r700_cp_load_microcode(drm_radeon_private_t *dev_priv)
 
 	if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV770)) {
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
-		DRM_INFO("Loading RV770 PFP Microcode\n");
+		DRM_INFO("Loading RV770/RV790 PFP Microcode\n");
 		for (i = 0; i < R700_PFP_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV770_pfp_microcode[i]);
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
 
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
-		DRM_INFO("Loading RV770 CP Microcode\n");
+		DRM_INFO("Loading RV770/RV790 CP Microcode\n");
 		for (i = 0; i < R700_PM4_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_ME_RAM_DATA, RV770_cp_microcode[i]);
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
 
-	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV730)) {
+	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV730) ||
+		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740)) {
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
-		DRM_INFO("Loading RV730 PFP Microcode\n");
+		DRM_INFO("Loading RV730/RV740 PFP Microcode\n");
 		for (i = 0; i < R700_PFP_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV730_pfp_microcode[i]);
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
 
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
-		DRM_INFO("Loading RV730 CP Microcode\n");
+		DRM_INFO("Loading RV730/RV740 CP Microcode\n");
 		for (i = 0; i < R700_PM4_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_ME_RAM_DATA, RV730_cp_microcode[i]);
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
@@ -1324,6 +1325,10 @@ static void r700_gfx_init(struct drm_device *dev,
 		dev_priv->r700_sc_prim_fifo_size = 0xf9;
 		dev_priv->r700_sc_hiz_tile_fifo_size = 0x30;
 		dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130;
+		if (dev_priv->r600_sx_max_export_pos_size > 16) {
+			dev_priv->r600_sx_max_export_pos_size -= 16;
+			dev_priv->r600_sx_max_export_smx_size += 16;
+		}
 		break;
 	case CHIP_RV710:
 		dev_priv->r600_max_pipes = 2;
@@ -1345,6 +1350,31 @@ static void r700_gfx_init(struct drm_device *dev,
 		dev_priv->r700_sc_hiz_tile_fifo_size = 0x30;
 		dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130;
 		break;
+	case CHIP_RV740:
+		dev_priv->r600_max_pipes = 4;
+		dev_priv->r600_max_tile_pipes = 4;
+		dev_priv->r600_max_simds = 8;
+		dev_priv->r600_max_backends = 4;
+		dev_priv->r600_max_gprs = 256;
+		dev_priv->r600_max_threads = 248;
+		dev_priv->r600_max_stack_entries = 512;
+		dev_priv->r600_max_hw_contexts = 8;
+		dev_priv->r600_max_gs_threads = 16 * 2;
+		dev_priv->r600_sx_max_export_size = 256;
+		dev_priv->r600_sx_max_export_pos_size = 32;
+		dev_priv->r600_sx_max_export_smx_size = 224;
+		dev_priv->r600_sq_num_cf_insts = 2;
+
+		dev_priv->r700_sx_num_of_sets = 7;
+		dev_priv->r700_sc_prim_fifo_size = 0x100;
+		dev_priv->r700_sc_hiz_tile_fifo_size = 0x30;
+		dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130;
+
+		if (dev_priv->r600_sx_max_export_pos_size > 16) {
+			dev_priv->r600_sx_max_export_pos_size -= 16;
+			dev_priv->r600_sx_max_export_smx_size += 16;
+		}
+		break;
 	default:
 		break;
 	}
@@ -1493,6 +1523,7 @@ static void r700_gfx_init(struct drm_device *dev,
 		break;
 	case CHIP_RV730:
 	case CHIP_RV710:
+	case CHIP_RV740:
 	default:
 		sq_ms_fifo_sizes |= R600_FETCH_FIFO_HIWATER(0x4);
 		break;
@@ -1569,6 +1600,7 @@ static void r700_gfx_init(struct drm_device *dev,
 	switch (dev_priv->flags & RADEON_FAMILY_MASK) {
 	case CHIP_RV770:
 	case CHIP_RV730:
+	case CHIP_RV740:
 		gs_prim_buffer_depth = 384;
 		break;
 	case CHIP_RV710:
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index aff90bb9648..89c4c44169f 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -2109,7 +2109,7 @@ int radeon_master_create(struct drm_device *dev, struct drm_master *master)
 
 	/* prebuild the SAREA */
 	sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
-	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK|_DRM_DRIVER,
+	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK,
 			 &master_priv->sarea);
 	if (ret) {
 		DRM_ERROR("SAREA setup failed\n");
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 0c6bfc1de15..127d0456f62 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -146,6 +146,7 @@ enum radeon_family {
 	CHIP_RV770,
 	CHIP_RV730,
 	CHIP_RV710,
+	CHIP_RV740,
 	CHIP_LAST,
 };
 
diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
index 409e00afdd0..327380888b4 100644
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ b/drivers/gpu/drm/via/via_dmablit.c
@@ -195,10 +195,8 @@ via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 	default:
 		vsg->state = dr_via_sg_init;
 	}
-	if (vsg->bounce_buffer) {
-		vfree(vsg->bounce_buffer);
-		vsg->bounce_buffer = NULL;
-	}
+	vfree(vsg->bounce_buffer);
+	vsg->bounce_buffer = NULL;
 	vsg->free_on_sequence = 0;
 }
 
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7e67dcb3d4f..7831a0318d3 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -116,9 +116,16 @@ config HID_CYPRESS
 	---help---
 	Support for cypress mouse and barcode readers.
 
-config DRAGONRISE_FF
-	tristate "DragonRise Inc. force feedback support"
+config HID_DRAGONRISE
+	tristate "DragonRise Inc. support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Say Y here if you have DragonRise Inc.game controllers.
+
+config DRAGONRISE_FF
+	bool "DragonRise Inc. force feedback support"
+	depends on HID_DRAGONRISE
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you want to enable force feedback support for DragonRise Inc.
@@ -160,7 +167,7 @@ config HID_LOGITECH
 	Support for Logitech devices that are not fully compliant with HID standard.
 
 config LOGITECH_FF
-	bool "Logitech force feedback"
+	bool "Logitech force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -176,7 +183,7 @@ config LOGITECH_FF
 	  force feedback.
 
 config LOGIRUMBLEPAD2_FF
-	bool "Logitech Rumblepad 2 force feedback"
+	bool "Logitech Rumblepad 2 force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -211,11 +218,19 @@ config HID_PANTHERLORD
 	---help---
 	Support for PantherLord/GreenAsia based device support.
 
+config HID_PANTHERLORD
+	tristate "Pantherlord support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a PantherLord/GreenAsia based game controller
+	  or adapter.
+
 config PANTHERLORD_FF
 	bool "Pantherlord force feedback support"
 	depends on HID_PANTHERLORD
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a PantherLord/GreenAsia based game controller
 	  or adapter and want to enable force feedback support for it.
 
@@ -247,15 +262,38 @@ config HID_SUNPLUS
 	---help---
 	Support for Sunplus wireless desktop.
 
-config GREENASIA_FF
-	tristate "GreenAsia (Product ID 0x12) force feedback support"
+config HID_GREENASIA
+	tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a GreenAsia (Product ID 0x12) based game
+	  controller or adapter.
+
+config GREENASIA_FF
+	bool "GreenAsia (Product ID 0x12) force feedback support"
+	depends on HID_GREENASIA
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
 	(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 	and want to enable force feedback support for it.
 
+config HID_SMARTJOYPLUS
+	tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for SmartJoy PLUS PS2/USB adapter.
+
+config SMARTJOYPLUS_FF
+	bool "SmartJoy PLUS PS2/USB adapter force feedback support"
+	depends on HID_SMARTJOYPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+	enable force feedback support for it.
+
 config HID_TOPSEED
 	tristate "TopSeed Cyberlink remote control support" if EMBEDDED
 	depends on USB_HID
@@ -263,21 +301,45 @@ config HID_TOPSEED
 	---help---
 	Say Y if you have a TopSeed Cyberlink remote control.
 
-config THRUSTMASTER_FF
-	tristate "ThrustMaster devices support"
+config HID_THRUSTMASTER
+	tristate "ThrustMaster devices support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
+	  a THRUSTMASTER Ferrari GT Rumble Wheel.
+
+config THRUSTMASTER_FF
+	bool "ThrustMaster devices force feedback support"
+	depends on HID_THRUSTMASTER
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
-	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
+	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel and
+	  want to enable force feedback support for it.
 
-config ZEROPLUS_FF
-	tristate "Zeroplus based game controller support"
+config HID_WACOM
+	tristate "Wacom Bluetooth devices support" if EMBEDDED
+	depends on BT_HIDP
+	default !EMBEDDED
+	---help---
+	Support for Wacom Graphire Bluetooth tablet.
+
+config HID_ZEROPLUS
+	tristate "Zeroplus based game controller support" if EMBEDDED
 	depends on USB_HID
-	select INPUT_FF_MEMLESS
-	help
+	default !EMBEDDED
+	---help---
 	  Say Y here if you have a Zeroplus based game controller.
 
+config ZEROPLUS_FF
+	bool "Zeroplus based game controller force feedback support"
+	depends on HID_ZEROPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	  Say Y here if you have a Zeroplus based game controller and want
+	  to have force feedback support for it.
+
 endmenu
 
 endif # HID_SUPPORT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 1f7cb0fd450..db35151673b 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
-obj-$(CONFIG_DRAGONRISE_FF)	+= hid-drff.o
+obj-$(CONFIG_HID_DRAGONRISE)	+= hid-drff.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
@@ -34,12 +34,14 @@ obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
+obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
-obj-$(CONFIG_GREENASIA_FF)	+= hid-gaff.o
-obj-$(CONFIG_THRUSTMASTER_FF)	+= hid-tmff.o
+obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
+obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
-obj-$(CONFIG_ZEROPLUS_FF)	+= hid-zpff.o
+obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
+obj-$(CONFIG_HID_WACOM)		+= hid-wacom.o
 
 obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index acbce5745b0..303ccce05bb 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -436,10 +436,6 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 
-	/* Apple wireless Mighty Mouse */
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c),
-		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
-
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, apple_devices);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8551693d645..f2c21d5d24e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1312,6 +1312,8 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 47ac1a7d66e..04359ed64b8 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -137,6 +137,14 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x44, "BarrelSwitch"},
     {0, 0x45, "Eraser"},
     {0, 0x46, "TabletPick"},
+    {0, 0x47, "Confidence"},
+    {0, 0x48, "Width"},
+    {0, 0x49, "Height"},
+    {0, 0x51, "ContactID"},
+    {0, 0x52, "InputMode"},
+    {0, 0x53, "DeviceIndex"},
+    {0, 0x54, "ContactCount"},
+    {0, 0x55, "ContactMaximumNumber"},
   { 15, 0, "PhysicalInterfaceDevice" },
     {0, 0x00, "Undefined"},
     {0, 0x01, "Physical_Interface_Device"},
@@ -514,9 +522,11 @@ static const char *events[EV_MAX + 1] = {
 	[EV_FF_STATUS] = "ForceFeedbackStatus",
 };
 
-static const char *syncs[2] = {
+static const char *syncs[3] = {
 	[SYN_REPORT] = "Report",		[SYN_CONFIG] = "Config",
+	[SYN_MT_REPORT] = "MT Report",
 };
+
 static const char *keys[KEY_MAX + 1] = {
 	[KEY_RESERVED] = "Reserved",		[KEY_ESC] = "Esc",
 	[KEY_1] = "1",				[KEY_2] = "2",
@@ -734,8 +744,17 @@ static const char *absolutes[ABS_MAX + 1] = {
 	[ABS_HAT2Y] = "Hat2Y",		[ABS_HAT3X] = "Hat3X",
 	[ABS_HAT3Y] = "Hat 3Y",		[ABS_PRESSURE] = "Pressure",
 	[ABS_DISTANCE] = "Distance",	[ABS_TILT_X] = "XTilt",
-	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "Tool Width",
+	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "ToolWidth",
 	[ABS_VOLUME] = "Volume",	[ABS_MISC] = "Misc",
+	[ABS_MT_TOUCH_MAJOR] = "MTMajor",
+	[ABS_MT_TOUCH_MINOR] = "MTMinor",
+	[ABS_MT_WIDTH_MAJOR] = "MTMajorW",
+	[ABS_MT_WIDTH_MINOR] = "MTMinorW",
+	[ABS_MT_ORIENTATION] = "MTOrientation",
+	[ABS_MT_POSITION_X] = "MTPositionX",
+	[ABS_MT_POSITION_Y] = "MTPositionY",
+	[ABS_MT_TOOL_TYPE] = "MTToolType",
+	[ABS_MT_BLOB_ID] = "MTBlobID",
 };
 
 static const char *misc[MSC_MAX + 1] = {
diff --git a/drivers/hid/hid-drff.c b/drivers/hid/hid-drff.c
index 34f3eb65100..a239d20ad7a 100644
--- a/drivers/hid/hid-drff.c
+++ b/drivers/hid/hid-drff.c
@@ -32,6 +32,8 @@
 #include <linux/hid.h>
 
 #include "hid-ids.h"
+
+#ifdef CONFIG_DRAGONRISE_FF
 #include "usbhid/usbhid.h"
 
 struct drff_device {
@@ -135,6 +137,12 @@ static int drff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int drff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
index 510ad3ab8d3..8a11ccddaf2 100644
--- a/drivers/hid/hid-gaff.c
+++ b/drivers/hid/hid-gaff.c
@@ -31,6 +31,8 @@
 #include <linux/usb.h>
 #include <linux/hid.h>
 #include "hid-ids.h"
+
+#ifdef CONFIG_GREENASIA_FF
 #include "usbhid/usbhid.h"
 
 struct gaff_device {
@@ -130,6 +132,12 @@ static int gaff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int gaff_init(struct hid_device *hdev)
+{
+	return 0;
+}
+#endif
 
 static int ga_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4d5ee2bbc62..63010103792 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -414,8 +414,10 @@
 #define USB_DEVICE_ID_VERNIER_LCSPEC	0x0006
 
 #define USB_VENDOR_ID_WACOM		0x056a
+#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH	0x81
 
 #define USB_VENDOR_ID_WISEGROUP		0x0925
+#define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
 #define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_8_8_4_IF_KIT	0x8201
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 51aff08e10c..56099709581 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -50,6 +50,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+static const signed short ff_joystick_ac[] = {
+	FF_CONSTANT,
+	FF_AUTOCENTER,
+	-1
+};
+
 static const signed short ff_wheel[] = {
 	FF_CONSTANT,
 	FF_AUTOCENTER,
@@ -60,8 +66,8 @@ static const struct dev_type devices[] = {
 	{ 0x046d, 0xc211, ff_rumble },
 	{ 0x046d, 0xc219, ff_rumble },
 	{ 0x046d, 0xc283, ff_joystick },
-	{ 0x046d, 0xc286, ff_joystick },
-	{ 0x046d, 0xc294, ff_joystick },
+	{ 0x046d, 0xc286, ff_joystick_ac },
+	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },
 	{ 0x046d, 0xca03, ff_wheel },
 };
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index c5b252be9c2..75ed9d2c1a3 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -1,13 +1,8 @@
 /*
- *  HID driver for some ntrig "special" devices
+ *  HID driver for N-Trig touchscreens
  *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- *  Copyright (c) 2007 Paul Walmsley
- *  Copyright (c) 2008 Jiri Slaby
  *  Copyright (c) 2008 Rafi Rubin
+ *  Copyright (c) 2009 Stephane Chatty
  *
  */
 
@@ -29,15 +24,79 @@
 #define nt_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, max, \
 					EV_KEY, (c))
 
+struct ntrig_data {
+	__s32 x, y, id, w, h;
+	char reading_a_point, found_contact_id;
+};
+
+/*
+ * this driver is aimed at two firmware versions in circulation:
+ *  - dual pen/finger single touch
+ *  - finger multitouch, pen not working
+ */
+
 static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_DIGITIZER &&
-			(usage->hid & 0xff) == 0x47) {
-		nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-		return 1;
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			input_set_abs_params(hi->input, ABS_X,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			input_set_abs_params(hi->input, ABS_Y,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		/* we do not want to map these for now */
+		case HID_DG_INVERT: /* value is always 0 */
+		case HID_DG_ERASER: /* value is always 0 */
+		case HID_DG_CONTACTID: /* value is useless */
+		case HID_DG_BARRELSWITCH:  /* doubtful */
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+			return -1;
+
+		/* original mapping by Rafi Rubin */
+		case HID_DG_CONFIDENCE:
+			nt_map_key_clear(BTN_TOOL_DOUBLETAP);
+			return 1;
+
+		/* width/height mapped on TouchMajor/TouchMinor/Orientation */
+		case HID_DG_WIDTH:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MAJOR);
+			return 1;
+		case HID_DG_HEIGHT:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MINOR);
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+					0, 1, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case 0xff000000:
+		/* we do not want to map these: no input-oriented meaning */
+		return -1;
 	}
+
 	return 0;
 }
 
@@ -51,6 +110,138 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 
 	return 0;
 }
+
+/*
+ * this function is called upon all reports
+ * so that we can filter contact point information,
+ * decide whether we are in multi or single touch mode
+ * and call input_mt_sync after each point if necessary
+ */
+static int ntrig_event (struct hid_device *hid, struct hid_field *field,
+		                        struct hid_usage *usage, __s32 value)
+{
+	struct input_dev *input = field->hidinput->input;
+	struct ntrig_data *nd = hid_get_drvdata(hid);
+
+        if (hid->claimed & HID_CLAIMED_INPUT) {
+		switch (usage->hid) {
+		case HID_GD_X:
+			nd->x = value;
+			nd->reading_a_point = 1;
+			break;
+		case HID_GD_Y:
+			nd->y = value;
+			break;
+		case HID_DG_CONTACTID:
+			nd->id = value;
+			/* we receive this only when in multitouch mode */
+			nd->found_contact_id = 1;
+			break;
+		case HID_DG_WIDTH:
+			nd->w = value;
+			break;
+		case HID_DG_HEIGHT:
+			nd->h = value;
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a finger event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			break;
+		case HID_DG_TIPPRESSURE:
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a pen event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+				input_event(input, EV_ABS, ABS_PRESSURE, value);
+			}
+			break;
+		case 0xff000002:
+			/*
+			 * we receive this when the device is in multitouch
+			 * mode. The first of the three values tagged with
+			 * this usage tells if the contact point is real
+			 * or a placeholder
+			 */
+			if (!nd->reading_a_point || value != 1)
+				break;
+			/* emit a normal (X, Y) for the first point only */
+			if (nd->id == 0) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+			if (nd->w > nd->h) {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 1);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->w);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->h);
+			} else {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 0);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->h);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->w);
+			}
+			input_mt_sync(field->hidinput->input);
+			nd->reading_a_point = 0;
+			nd->found_contact_id = 0;
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+                hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct ntrig_data *nd;
+
+	nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
+	if (!nd) {
+		dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
+		return -ENOMEM;
+	}
+	nd->reading_a_point = 0;
+	nd->found_contact_id = 0;
+	hid_set_drvdata(hdev, nd);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree (nd);
+	return ret;
+}
+
+static void ntrig_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
 static const struct hid_device_id ntrig_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
 		.driver_data = NTRIG_DUPLICATE_USAGES },
@@ -58,11 +249,20 @@ static const struct hid_device_id ntrig_devices[] = {
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
 
+static const struct hid_usage_id ntrig_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
 static struct hid_driver ntrig_driver = {
 	.name = "ntrig",
 	.id_table = ntrig_devices,
+	.probe = ntrig_probe,
+	.remove = ntrig_remove,
 	.input_mapping = ntrig_input_mapping,
 	.input_mapped = ntrig_input_mapped,
+	.usage_table = ntrig_grabbed_usages,
+	.event = ntrig_event,
 };
 
 static int ntrig_init(void)
diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c
new file mode 100644
index 00000000000..eab169e5c37
--- /dev/null
+++ b/drivers/hid/hid-sjoy.c
@@ -0,0 +1,180 @@
+/*
+ *  Force feedback support for SmartJoy PLUS PS2->USB adapter
+ *
+ *  Copyright (c) 2009 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ *  Based of hid-pl.c and hid-gaff.c
+ *   Copyright (c) 2007, 2009 Anssi Hannula <anssi.hannula@gmail.com>
+ *   Copyright (c) 2008 Lukasz Lubojanski <lukasz@lubojanski.info>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "hid-ids.h"
+
+#ifdef CONFIG_SMARTJOYPLUS_FF
+#include "usbhid/usbhid.h"
+
+struct sjoyff_device {
+	struct hid_report *report;
+};
+
+static int hid_sjoyff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct sjoyff_device *sjoyff = data;
+	u32 left, right;
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+	dev_dbg(&dev->dev, "called with 0x%08x 0x%08x\n", left, right);
+
+	left = left * 0xff / 0xffff;
+	right = (right != 0); /* on/off only */
+
+	sjoyff->report->field[0]->value[1] = right;
+	sjoyff->report->field[0]->value[2] = left;
+	dev_dbg(&dev->dev, "running with 0x%02x 0x%02x\n", left, right);
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	return 0;
+}
+
+static int sjoyff_init(struct hid_device *hid)
+{
+	struct sjoyff_device *sjoyff;
+	struct hid_report *report;
+	struct hid_input *hidinput = list_entry(hid->inputs.next,
+						struct hid_input, list);
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct list_head *report_ptr = report_list;
+	struct input_dev *dev;
+	int error;
+
+	if (list_empty(report_list)) {
+		dev_err(&hid->dev, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report_ptr = report_ptr->next;
+
+	if (report_ptr == report_list) {
+		dev_err(&hid->dev, "required output report is "
+				"missing\n");
+		return -ENODEV;
+	}
+
+	report = list_entry(report_ptr, struct hid_report, list);
+	if (report->maxfield < 1) {
+		dev_err(&hid->dev, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 3) {
+		dev_err(&hid->dev, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	sjoyff = kzalloc(sizeof(struct sjoyff_device), GFP_KERNEL);
+	if (!sjoyff)
+		return -ENOMEM;
+
+	dev = hidinput->input;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, sjoyff, hid_sjoyff_play);
+	if (error) {
+		kfree(sjoyff);
+		return error;
+	}
+
+	sjoyff->report = report;
+	sjoyff->report->field[0]->value[0] = 0x01;
+	sjoyff->report->field[0]->value[1] = 0x00;
+	sjoyff->report->field[0]->value[2] = 0x00;
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	dev_info(&hid->dev,
+		"Force feedback for SmartJoy PLUS PS2/USB adapter\n");
+
+	return 0;
+}
+#else
+static inline int sjoyff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
+
+static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err;
+	}
+
+	sjoyff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id sjoy_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, sjoy_devices);
+
+static struct hid_driver sjoy_driver = {
+	.name = "smartjoyplus",
+	.id_table = sjoy_devices,
+	.probe = sjoy_probe,
+};
+
+static int sjoy_init(void)
+{
+	return hid_register_driver(&sjoy_driver);
+}
+
+static void sjoy_exit(void)
+{
+	hid_unregister_driver(&sjoy_driver);
+}
+
+module_init(sjoy_init);
+module_exit(sjoy_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jussi Kivilinna");
+
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 7c1f7b50330..fcd6ccd02fe 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -33,11 +33,6 @@
 
 #include "hid-ids.h"
 
-#include "usbhid/usbhid.h"
-
-/* Usages for thrustmaster devices I know about */
-#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
-
 static const signed short ff_rumble[] = {
 	FF_RUMBLE,
 	-1
@@ -48,6 +43,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+#ifdef CONFIG_THRUSTMASTER_FF
+#include "usbhid/usbhid.h"
+
+/* Usages for thrustmaster devices I know about */
+#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
+
 struct tmff_device {
 	struct hid_report *report;
 	struct hid_field *ff_field;
@@ -209,6 +210,12 @@ fail:
 	kfree(tmff);
 	return error;
 }
+#else
+static inline int tmff_init(struct hid_device *hid, const signed short *ff_bits)
+{
+	return 0;
+}
+#endif
 
 static int tm_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
new file mode 100644
index 00000000000..1f9237f511e
--- /dev/null
+++ b/drivers/hid/hid-wacom.c
@@ -0,0 +1,259 @@
+/*
+ *  Bluetooth Wacom Tablet support
+ *
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2007 Paul Walmsley
+ *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
+ *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
+ *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct wacom_data {
+	__u16 tool;
+	unsigned char butstate;
+};
+
+static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *raw_data, int size)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	unsigned char *data = (unsigned char *) raw_data;
+	int tool, x, y, rw;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		return 0;
+
+	tool = 0;
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Check if this is a tablet report */
+	if (data[0] != 0x03)
+		return 0;
+
+	/* Get X & Y positions */
+	x = le16_to_cpu(*(__le16 *) &data[2]);
+	y = le16_to_cpu(*(__le16 *) &data[4]);
+
+	/* Get current tool identifier */
+	if (data[1] & 0x90) { /* If pen is in the in/active area */
+		switch ((data[1] >> 5) & 3) {
+		case 0:	/* Pen */
+			tool = BTN_TOOL_PEN;
+			break;
+
+		case 1: /* Rubber */
+			tool = BTN_TOOL_RUBBER;
+			break;
+
+		case 2: /* Mouse with wheel */
+		case 3: /* Mouse without wheel */
+			tool = BTN_TOOL_MOUSE;
+			break;
+		}
+
+		/* Reset tool if out of active tablet area */
+		if (!(data[1] & 0x10))
+			tool = 0;
+	}
+
+	/* If tool changed, notify input subsystem */
+	if (wdata->tool != tool) {
+		if (wdata->tool) {
+			/* Completely reset old tool state */
+			if (wdata->tool == BTN_TOOL_MOUSE) {
+				input_report_key(input, BTN_LEFT, 0);
+				input_report_key(input, BTN_RIGHT, 0);
+				input_report_key(input, BTN_MIDDLE, 0);
+				input_report_abs(input, ABS_DISTANCE,
+						input->absmax[ABS_DISTANCE]);
+			} else {
+				input_report_key(input, BTN_TOUCH, 0);
+				input_report_key(input, BTN_STYLUS, 0);
+				input_report_key(input, BTN_STYLUS2, 0);
+				input_report_abs(input, ABS_PRESSURE, 0);
+			}
+			input_report_key(input, wdata->tool, 0);
+			input_sync(input);
+		}
+		wdata->tool = tool;
+		if (tool)
+			input_report_key(input, tool, 1);
+	}
+
+	if (tool) {
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+
+		switch ((data[1] >> 5) & 3) {
+		case 2: /* Mouse with wheel */
+			input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
+			rw = (data[6] & 0x01) ? -1 :
+				(data[6] & 0x02) ? 1 : 0;
+			input_report_rel(input, REL_WHEEL, rw);
+			/* fall through */
+
+		case 3: /* Mouse without wheel */
+			input_report_key(input, BTN_LEFT, data[1] & 0x01);
+			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
+			/* Compute distance between mouse and tablet */
+			rw = 44 - (data[6] >> 2);
+			if (rw < 0)
+				rw = 0;
+			else if (rw > 31)
+				rw = 31;
+			input_report_abs(input, ABS_DISTANCE, rw);
+			break;
+
+		default:
+			input_report_abs(input, ABS_PRESSURE,
+					data[6] | (((__u16) (data[1] & 0x08)) << 5));
+			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
+			break;
+		}
+
+		input_sync(input);
+	}
+
+	/* Report the state of the two buttons at the top of the tablet
+	 * as two extra fingerpad keys (buttons 4 & 5). */
+	rw = data[7] & 0x03;
+	if (rw != wdata->butstate) {
+		wdata->butstate = rw;
+		input_report_key(input, BTN_0, rw & 0x02);
+		input_report_key(input, BTN_1, rw & 0x01);
+		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+		input_sync(input);
+	}
+
+	return 1;
+}
+
+static int wacom_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	struct wacom_data *wdata;
+	int ret;
+
+	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
+	if (wdata == NULL) {
+		dev_err(&hdev->dev, "can't alloc wacom descriptor\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, wdata);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err_free;
+	}
+
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Basics */
+	input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
+	input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
+		BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
+	input->relbit[0] |= BIT(REL_WHEEL);
+	set_bit(BTN_TOOL_PEN, input->keybit);
+	set_bit(BTN_TOUCH, input->keybit);
+	set_bit(BTN_STYLUS, input->keybit);
+	set_bit(BTN_STYLUS2, input->keybit);
+	set_bit(BTN_LEFT, input->keybit);
+	set_bit(BTN_RIGHT, input->keybit);
+	set_bit(BTN_MIDDLE, input->keybit);
+
+	/* Pad */
+	input->evbit[0] |= BIT(EV_MSC);
+	input->mscbit[0] |= BIT(MSC_SERIAL);
+
+	/* Distance, rubber and mouse */
+	input->absbit[0] |= BIT(ABS_DISTANCE);
+	set_bit(BTN_TOOL_RUBBER, input->keybit);
+	set_bit(BTN_TOOL_MOUSE, input->keybit);
+
+	input->absmax[ABS_PRESSURE] = 511;
+	input->absmax[ABS_DISTANCE] = 32;
+
+	input->absmax[ABS_X] = 16704;
+	input->absmax[ABS_Y] = 12064;
+	input->absfuzz[ABS_X] = 4;
+	input->absfuzz[ABS_Y] = 4;
+
+	return 0;
+err_free:
+	kfree(wdata);
+	return ret;
+}
+
+static void wacom_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id wacom_devices[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, wacom_devices);
+
+static struct hid_driver wacom_driver = {
+	.name = "wacom",
+	.id_table = wacom_devices,
+	.probe = wacom_probe,
+	.remove = wacom_remove,
+	.raw_event = wacom_raw_event,
+};
+
+static int wacom_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&wacom_driver);
+	if (ret)
+		printk(KERN_ERR "can't register wacom driver\n");
+	printk(KERN_ERR "wacom driver registered\n");
+	return ret;
+}
+
+static void wacom_exit(void)
+{
+	hid_unregister_driver(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-zpff.c b/drivers/hid/hid-zpff.c
index 85a198a1853..57f710757bf 100644
--- a/drivers/hid/hid-zpff.c
+++ b/drivers/hid/hid-zpff.c
@@ -27,6 +27,7 @@
 
 #include "hid-ids.h"
 
+#ifdef CONFIG_ZEROPLUS_FF
 #include "usbhid/usbhid.h"
 
 struct zpff_device {
@@ -108,6 +109,12 @@ static int zpff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int zpff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int zp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 00ccf4b1985..0c6639ea03d 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -349,10 +349,7 @@ int hidraw_connect(struct hid_device *hid)
 	int minor, result;
 	struct hidraw *dev;
 
-	/* TODO currently we accept any HID device. This should later
-	 * probably be fixed to accept only those devices which provide
-	 * non-input applications
-	 */
+	/* we accept any HID device, no matter the applications */
 
 	dev = kzalloc(sizeof(struct hidraw), GFP_KERNEL);
 	if (!dev)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index ac8049b5f1e..76c4bbe9dcc 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1234,12 +1234,11 @@ static int hid_post_reset(struct usb_interface *intf)
 	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status;
- 
+
 	spin_lock_irq(&usbhid->lock);
 	clear_bit(HID_RESET_PENDING, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->lock);
 	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
-	/* FIXME: Any more reinitialization needed? */
 	status = hid_start_in(hid);
 	if (status < 0)
 		hid_io_error(hid);
@@ -1251,14 +1250,14 @@ static int hid_post_reset(struct usb_interface *intf)
 int usbhid_get_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	return usb_autopm_get_interface(usbhid->intf);
 }
 
 void usbhid_put_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	usb_autopm_put_interface(usbhid->intf);
 }
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d73f5f473e3..f8090e137fe 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -306,11 +306,11 @@ config SENSORS_F71805F
 	  will be called f71805f.
 
 config SENSORS_F71882FG
-	tristate "Fintek F71862FG, F71882FG and F8000"
+	tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
 	  and F8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
@@ -418,7 +418,7 @@ config SENSORS_IBMAEM
 	  power sensors and capping hardware in various IBM System X
 	  servers that support Active Energy Manager.  This includes
 	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
-	  and certain HS2x/LS2x/QS2x blades.
+	  and certain HC10/HS2x/LS2x/QS2x blades.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ibmaem.
@@ -787,6 +787,16 @@ config SENSORS_THMC50
 	  This driver can also be built as a module.  If so, the module
 	  will be called thmc50.
 
+config SENSORS_TMP401
+	tristate "Texas Instruments TMP401 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Texas Instruments TMP401 and
+	  TMP411 temperature sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tmp401.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 0ae26984ba4..b793dce6bed 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
+obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_VT1211)	+= vt1211.o
 obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 5f81ddf7150..4146105f1a5 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1,6 +1,6 @@
 /***************************************************************************
  *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
- *   Copyright (C) 2007,2008 by Hans de Goede <hdegoede@redhat.com>        *
+ *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
@@ -32,6 +32,7 @@
 
 #define DRVNAME "f71882fg"
 
+#define SIO_F71858FG_LD_HWM	0x02	/* Hardware monitor logical device */
 #define SIO_F71882FG_LD_HWM	0x04	/* Hardware monitor logical device */
 #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
 #define SIO_LOCK_KEY		0xAA	/* Key to diasble Super-I/O */
@@ -44,6 +45,7 @@
 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
 #define SIO_F8000_ID		0x0581	/* Chipset ID */
@@ -70,6 +72,7 @@
 #define F71882FG_REG_TEMP_HIGH(nr)	(0x81 + 2 * (nr))
 #define F71882FG_REG_TEMP_STATUS	0x62
 #define F71882FG_REG_TEMP_BEEP		0x63
+#define F71882FG_REG_TEMP_CONFIG	0x69
 #define F71882FG_REG_TEMP_HYST(nr)	(0x6C + (nr))
 #define F71882FG_REG_TEMP_TYPE		0x6B
 #define F71882FG_REG_TEMP_DIODE_OPEN	0x6F
@@ -92,9 +95,10 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f8000 };
 
 static const char *f71882fg_names[] = {
+	"f71858fg",
 	"f71862fg",
 	"f71882fg",
 	"f8000",
@@ -119,6 +123,7 @@ struct f71882fg_data {
 	struct device *hwmon_dev;
 
 	struct mutex update_lock;
+	int temp_start;			/* temp numbering start (0 or 1) */
 	char valid;			/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 	unsigned long last_limits;	/* In jiffies */
@@ -136,7 +141,7 @@ struct f71882fg_data {
 	/* Note: all models have only 3 temperature channels, but on some
 	   they are addressed as 0-2 and on others as 1-3, so for coding
 	   convenience we reserve space for 4 channels */
-	u8	temp[4];
+	u16	temp[4];
 	u8	temp_ovt[4];
 	u8	temp_high[4];
 	u8	temp_hyst[2]; /* 2 hysts stored per reg */
@@ -144,6 +149,7 @@ struct f71882fg_data {
 	u8	temp_status;
 	u8	temp_beep;
 	u8	temp_diode_open;
+	u8	temp_config;
 	u8	pwm[4];
 	u8	pwm_enable;
 	u8	pwm_auto_point_hyst[2];
@@ -247,11 +253,55 @@ static struct platform_driver f71882fg_driver = {
 		.name	= DRVNAME,
 	},
 	.probe		= f71882fg_probe,
-	.remove		= __devexit_p(f71882fg_remove),
+	.remove		= f71882fg_remove,
 };
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
+/* Temp and in attr for the f71858fg */
+static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
+	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
+	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 0),
+	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 0),
+	SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0),
+	SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 0),
+	SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 0),
+	SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+	SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
+	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 1),
+	SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 1),
+	SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 1),
+	SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 1),
+	SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
+	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
+	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 2),
+	SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 2),
+	SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
+	SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 2),
+	SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 2),
+	SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
 /* Temp and in attr common to both the f71862fg and f71882fg */
 static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -344,6 +394,7 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 0),
 	SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+	SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
 	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
 	SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 1),
@@ -351,12 +402,14 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 		store_temp_max, 0, 1),
 	SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
 	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
 	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
 	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 2),
 	SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 2),
 	SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
 };
 
 /* Fan / PWM attr common to all models */
@@ -395,6 +448,9 @@ static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
 		      show_pwm_auto_point_channel,
 		      store_pwm_auto_point_channel, 0, 1),
 
+	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
+	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
@@ -450,9 +506,6 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
-	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
-	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
-		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      1, 2),
@@ -473,22 +526,8 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 };
 
-/* Fan / PWM attr for the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
-	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 0),
-	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 1),
-	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 2),
-	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
-	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
-		      show_fan_full_speed,
-		      store_fan_full_speed, 0, 3),
-	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 3),
-	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
+/* Fan / PWM attr common to both the f71882fg and f71858fg */
+static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 0),
@@ -565,9 +604,6 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
-	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
-	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
-		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 2),
@@ -605,6 +641,24 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 2),
 	SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+};
+
+/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
+static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
+	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 0),
+	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 1),
+	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 2),
+
+	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+		      show_fan_full_speed,
+		      store_fan_full_speed, 0, 3),
+	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 3),
+	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
 
 	SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
 	SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
@@ -659,8 +713,6 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 static struct sensor_device_attribute_2 f8000_fan_attr[] = {
 	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
 
-	SENSOR_ATTR_2(pwm3, S_IRUGO, show_pwm, NULL, 0, 2),
-
 	SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 2),
@@ -857,13 +909,20 @@ static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
 	outb(val & 255, data->addr + DATA_REG_OFFSET);
 }
 
+static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
+{
+	if (data->type == f71858fg)
+		return f71882fg_read16(data, F71882FG_REG_TEMP(nr));
+	else
+		return f71882fg_read8(data, F71882FG_REG_TEMP(nr));
+}
+
 static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
 	int nr, reg = 0, reg2;
 	int nr_fans = (data->type == f71882fg) ? 4 : 3;
-	int nr_ins = (data->type == f8000) ? 3 : 9;
-	int temp_start = (data->type == f8000) ? 0 : 1;
+	int nr_ins = (data->type == f71858fg || data->type == f8000) ? 3 : 9;
 
 	mutex_lock(&data->update_lock);
 
@@ -878,7 +937,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		/* Get High & boundary temps*/
-		for (nr = temp_start; nr < 3 + temp_start; nr++) {
+		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++) {
 			data->temp_ovt[nr] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_OVT(nr));
 			data->temp_high[nr] = f71882fg_read8(data,
@@ -886,14 +945,17 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		if (data->type != f8000) {
-			data->fan_beep = f71882fg_read8(data,
-						F71882FG_REG_FAN_BEEP);
-			data->temp_beep = f71882fg_read8(data,
-						F71882FG_REG_TEMP_BEEP);
 			data->temp_hyst[0] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(0));
 			data->temp_hyst[1] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(1));
+		}
+
+		if (data->type == f71862fg || data->type == f71882fg) {
+			data->fan_beep = f71882fg_read8(data,
+						F71882FG_REG_FAN_BEEP);
+			data->temp_beep = f71882fg_read8(data,
+						F71882FG_REG_TEMP_BEEP);
 			/* Have to hardcode type, because temp1 is special */
 			reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
 			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
@@ -904,10 +966,10 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->temp_type[1] = 6 /* PECI */;
 		else if ((reg2 & 0x03) == 0x02)
 			data->temp_type[1] = 5 /* AMDSI */;
-		else if (data->type != f8000)
+		else if (data->type == f71862fg || data->type == f71882fg)
 			data->temp_type[1] = (reg & 0x02) ? 2 : 4;
 		else
-			data->temp_type[1] = 2; /* F8000 only supports BJT */
+			data->temp_type[1] = 2; /* Only supports BJT */
 
 		data->pwm_enable = f71882fg_read8(data,
 						  F71882FG_REG_PWM_ENABLE);
@@ -963,9 +1025,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 						F71882FG_REG_TEMP_STATUS);
 		data->temp_diode_open = f71882fg_read8(data,
 						F71882FG_REG_TEMP_DIODE_OPEN);
-		for (nr = temp_start; nr < 3 + temp_start; nr++)
-			data->temp[nr] = f71882fg_read8(data,
-						F71882FG_REG_TEMP(nr));
+		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++)
+			data->temp[nr] = f71882fg_read_temp(data, nr);
 
 		data->fan_status = f71882fg_read8(data,
 						F71882FG_REG_FAN_STATUS);
@@ -1168,8 +1229,24 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 {
 	struct f71882fg_data *data = f71882fg_update_device(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
+	int sign, temp;
+
+	if (data->type == f71858fg) {
+		/* TEMP_TABLE_SEL 1 or 3 ? */
+		if (data->temp_config & 1) {
+			sign = data->temp[nr] & 0x0001;
+			temp = (data->temp[nr] >> 5) & 0x7ff;
+		} else {
+			sign = data->temp[nr] & 0x8000;
+			temp = (data->temp[nr] >> 5) & 0x3ff;
+		}
+		temp *= 125;
+		if (sign)
+			temp -= 128000;
+	} else
+		temp = data->temp[nr] * 1000;
 
-	return sprintf(buf, "%d\n", data->temp[nr] * 1000);
+	return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t show_temp_max(struct device *dev, struct device_attribute
@@ -1440,6 +1517,10 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
 	int nr = to_sensor_dev_attr_2(devattr)->index;
 	long val = simple_strtol(buf, NULL, 10);
 
+	/* Special case for F8000 pwm channel 3 which only does auto mode */
+	if (data->type == f8000 && nr == 2 && val != 2)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
 	/* Special case for F8000 auto PWM mode / Thermostat mode */
@@ -1458,6 +1539,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
 	} else {
 		switch (val) {
 		case 1:
+			/* The f71858fg does not support manual RPM mode */
+			if (data->type == f71858fg &&
+			    ((data->pwm_enable >> (2 * nr)) & 1)) {
+				count = -EINVAL;
+				goto leave;
+			}
 			data->pwm_enable |= 2 << (2 * nr);
 			break;		/* Manual */
 		case 2:
@@ -1616,9 +1703,9 @@ static ssize_t show_pwm_auto_point_channel(struct device *dev,
 	int result;
 	struct f71882fg_data *data = f71882fg_update_device(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
-	int temp_start = (data->type == f8000) ? 0 : 1;
 
-	result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start);
+	result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) -
+		       data->temp_start);
 
 	return sprintf(buf, "%d\n", result);
 }
@@ -1629,7 +1716,6 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
-	int temp_start = (data->type == f8000) ? 0 : 1;
 	long val = simple_strtol(buf, NULL, 10);
 
 	switch (val) {
@@ -1645,7 +1731,7 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 	default:
 		return -EINVAL;
 	}
-	val += temp_start;
+	val += data->temp_start;
 	mutex_lock(&data->update_lock);
 	data->pwm_auto_point_mapping[nr] =
 		f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
@@ -1721,6 +1807,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
 	data->type = sio_data->type;
+	data->temp_start =
+	    (data->type == f71858fg || data->type == f8000) ? 0 : 1;
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
@@ -1736,19 +1824,6 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		goto exit_free;
 	}
 
-	data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
-	/* If it is a 71862 and the fan / pwm part is enabled sanity check
-	   the pwm settings */
-	if (data->type == f71862fg && (start_reg & 0x02)) {
-		if ((data->pwm_enable & 0x15) != 0x15) {
-			dev_err(&pdev->dev,
-				"Invalid (reserved) pwm settings: 0x%02x\n",
-				(unsigned int)data->pwm_enable);
-			err = -ENODEV;
-			goto exit_free;
-		}
-	}
-
 	/* Register sysfs interface files */
 	err = device_create_file(&pdev->dev, &dev_attr_name);
 	if (err)
@@ -1756,6 +1831,20 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 	if (start_reg & 0x01) {
 		switch (data->type) {
+		case f71858fg:
+			data->temp_config =
+				f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
+			if (data->temp_config & 0x10)
+				/* The f71858fg temperature alarms behave as
+				   the f8000 alarms in this mode */
+				err = f71882fg_create_sysfs_files(pdev,
+					f8000_in_temp_attr,
+					ARRAY_SIZE(f8000_in_temp_attr));
+			else
+				err = f71882fg_create_sysfs_files(pdev,
+					f71858fg_in_temp_attr,
+					ARRAY_SIZE(f71858fg_in_temp_attr));
+			break;
 		case f71882fg:
 			err = f71882fg_create_sysfs_files(pdev,
 					f71882fg_in_temp_attr,
@@ -1779,6 +1868,35 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 	}
 
 	if (start_reg & 0x02) {
+		data->pwm_enable =
+			f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
+
+		/* Sanity check the pwm settings */
+		switch (data->type) {
+		case f71858fg:
+			err = 0;
+			for (i = 0; i < nr_fans; i++)
+				if (((data->pwm_enable >> (i * 2)) & 3) == 3)
+					err = 1;
+			break;
+		case f71862fg:
+			err = (data->pwm_enable & 0x15) != 0x15;
+			break;
+		case f71882fg:
+			err = 0;
+			break;
+		case f8000:
+			err = data->pwm_enable & 0x20;
+			break;
+		}
+		if (err) {
+			dev_err(&pdev->dev,
+				"Invalid (reserved) pwm settings: 0x%02x\n",
+				(unsigned int)data->pwm_enable);
+			err = -ENODEV;
+			goto exit_unregister_sysfs;
+		}
+
 		err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr,
 					ARRAY_SIZE(fxxxx_fan_attr));
 		if (err)
@@ -1794,6 +1912,13 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			err = f71882fg_create_sysfs_files(pdev,
 					f71882fg_fan_attr,
 					ARRAY_SIZE(f71882fg_fan_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			/* fall through! */
+		case f71858fg:
+			err = f71882fg_create_sysfs_files(pdev,
+					f71882fg_f71858fg_fan_attr,
+					ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
@@ -1878,6 +2003,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
 	switch (devid) {
+	case SIO_F71858_ID:
+		sio_data->type = f71858fg;
+		break;
 	case SIO_F71862_ID:
 		sio_data->type = f71862fg;
 		break;
@@ -1892,7 +2020,11 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		goto exit;
 	}
 
-	superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+	if (sio_data->type == f71858fg)
+		superio_select(sioaddr, SIO_F71858FG_LD_HWM);
+	else
+		superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+
 	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
 		printk(KERN_WARNING DRVNAME ": Device not activated\n");
 		goto exit;
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index e15c3e7b07e..29ea6753f3b 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -18,6 +18,7 @@
 #include <linux/hwmon.h>
 #include <linux/gfp.h>
 #include <linux/spinlock.h>
+#include <linux/pci.h>
 
 #define HWMON_ID_PREFIX "hwmon"
 #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
@@ -86,8 +87,36 @@ void hwmon_device_unregister(struct device *dev)
 			"hwmon_device_unregister() failed: bad class ID!\n");
 }
 
+static void __init hwmon_pci_quirks(void)
+{
+#if defined CONFIG_X86 && defined CONFIG_PCI
+	struct pci_dev *sb;
+	u16 base;
+	u8 enable;
+
+	/* Open access to 0x295-0x296 on MSI MS-7031 */
+	sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL);
+	if (sb &&
+	    (sb->subsystem_vendor == 0x1462 &&	/* MSI */
+	     sb->subsystem_device == 0x0031)) {	/* MS-7031 */
+
+		pci_read_config_byte(sb, 0x48, &enable);
+		pci_read_config_word(sb, 0x64, &base);
+
+		if (base == 0 && !(enable & BIT(2))) {
+			dev_info(&sb->dev,
+				 "Opening wide generic port at 0x295\n");
+			pci_write_config_word(sb, 0x64, 0x295);
+			pci_write_config_byte(sb, 0x48, enable | BIT(2));
+		}
+	}
+#endif
+}
+
 static int __init hwmon_init(void)
 {
+	hwmon_pci_quirks();
+
 	hwmon_class = class_create(THIS_MODULE, "hwmon");
 	if (IS_ERR(hwmon_class)) {
 		printk(KERN_ERR "hwmon.c: couldn't create sysfs class\n");
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index fe74609a7fe..405d3fb5d76 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1127,3 +1127,4 @@ MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMBladeHC10-*");
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index f27af6a9da4..86142a85823 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -12,7 +12,7 @@
  * also work with the MAX6651. It does not distinguish max6650 and max6651
  * chips.
  *
- * Tha datasheet was last seen at:
+ * The datasheet was last seen at:
  *
  *        http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
  *
@@ -98,6 +98,16 @@ I2C_CLIENT_INSMOD_1(max6650);
 #define MAX6650_CFG_MODE_OPEN_LOOP	0x30
 #define MAX6650_COUNT_MASK		0x03
 
+/*
+ * Alarm status register bits
+ */
+
+#define MAX6650_ALRM_MAX	0x01
+#define MAX6650_ALRM_MIN	0x02
+#define MAX6650_ALRM_TACH	0x04
+#define MAX6650_ALRM_GPIO1	0x08
+#define MAX6650_ALRM_GPIO2	0x10
+
 /* Minimum and maximum values of the FAN-RPM */
 #define FAN_RPM_MIN 240
 #define FAN_RPM_MAX 30000
@@ -151,6 +161,7 @@ struct max6650_data
 	u8 tach[4];
 	u8 count;
 	u8 dac;
+	u8 alarm;
 };
 
 static ssize_t get_fan(struct device *dev, struct device_attribute *devattr,
@@ -418,6 +429,33 @@ static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
 	return count;
 }
 
+/*
+ * Get alarm stati:
+ * Possible values:
+ * 0 = no alarm
+ * 1 = alarm
+ */
+
+static ssize_t get_alarm(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max6650_data *data = max6650_update_device(dev);
+	struct i2c_client *client = to_i2c_client(dev);
+	int alarm = 0;
+
+	if (data->alarm & attr->index) {
+		mutex_lock(&data->update_lock);
+		alarm = 1;
+		data->alarm &= ~attr->index;
+		data->alarm |= i2c_smbus_read_byte_data(client,
+							MAX6650_REG_ALARM);
+		mutex_unlock(&data->update_lock);
+	}
+
+	return sprintf(buf, "%d\n", alarm);
+}
+
 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, 0);
 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan, NULL, 1);
 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, get_fan, NULL, 2);
@@ -426,7 +464,41 @@ static DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, get_target, set_target);
 static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, get_div, set_div);
 static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, get_enable, set_enable);
 static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm);
+static SENSOR_DEVICE_ATTR(fan1_max_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_MAX);
+static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_MIN);
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_TACH);
+static SENSOR_DEVICE_ATTR(gpio1_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_GPIO1);
+static SENSOR_DEVICE_ATTR(gpio2_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_GPIO2);
+
+static mode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
+				    int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
+	struct device_attribute *devattr;
 
+	/*
+	 * Hide the alarms that have not been enabled by the firmware
+	 */
+
+	devattr = container_of(a, struct device_attribute, attr);
+	if (devattr == &sensor_dev_attr_fan1_max_alarm.dev_attr
+	 || devattr == &sensor_dev_attr_fan1_min_alarm.dev_attr
+	 || devattr == &sensor_dev_attr_fan1_fault.dev_attr
+	 || devattr == &sensor_dev_attr_gpio1_alarm.dev_attr
+	 || devattr == &sensor_dev_attr_gpio2_alarm.dev_attr) {
+		if (!(alarm_en & to_sensor_dev_attr(devattr)->index))
+			return 0;
+	}
+
+	return a->mode;
+}
 
 static struct attribute *max6650_attrs[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
@@ -437,11 +509,17 @@ static struct attribute *max6650_attrs[] = {
 	&dev_attr_fan1_div.attr,
 	&dev_attr_pwm1_enable.attr,
 	&dev_attr_pwm1.attr,
+	&sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_fault.dev_attr.attr,
+	&sensor_dev_attr_gpio1_alarm.dev_attr.attr,
+	&sensor_dev_attr_gpio2_alarm.dev_attr.attr,
 	NULL
 };
 
 static struct attribute_group max6650_attr_grp = {
 	.attrs = max6650_attrs,
+	.is_visible = max6650_attrs_visible,
 };
 
 /*
@@ -659,6 +737,12 @@ static struct max6650_data *max6650_update_device(struct device *dev)
 							MAX6650_REG_COUNT);
 		data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
 
+		/* Alarms are cleared on read in case the condition that
+		 * caused the alarm is removed. Keep the value latched here
+		 * for providing the register through different alarm files. */
+		data->alarm |= i2c_smbus_read_byte_data(client,
+							MAX6650_REG_ALARM);
+
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 6cbdc2fea73..56cd6004da3 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -627,35 +627,35 @@ static struct platform_driver sht_drivers[] = {
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht11",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht15",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht71",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht75",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	},
 };
 
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
new file mode 100644
index 00000000000..7b34f2cd08b
--- /dev/null
+++ b/drivers/hwmon/tmp401.c
@@ -0,0 +1,690 @@
+/* tmp401.c
+ *
+ * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
+ * Preliminary tmp411 support by:
+ * Gabriel Konat, Sander Leget, Wouter Willems
+ * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
+ *
+ * Note this IC is in some aspect similar to the LM90, but it has quite a
+ * few differences too, for example the local temp has a higher resolution
+ * and thus has 16 bits registers for its value and limit instead of 8 bits.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_2(tmp401, tmp411);
+
+/*
+ * The TMP401 registers, note some registers have different addresses for
+ * reading and writing
+ */
+#define TMP401_STATUS				0x02
+#define TMP401_CONFIG_READ			0x03
+#define TMP401_CONFIG_WRITE			0x09
+#define TMP401_CONVERSION_RATE_READ		0x04
+#define TMP401_CONVERSION_RATE_WRITE		0x0A
+#define TMP401_TEMP_CRIT_HYST			0x21
+#define TMP401_CONSECUTIVE_ALERT		0x22
+#define TMP401_MANUFACTURER_ID_REG		0xFE
+#define TMP401_DEVICE_ID_REG			0xFF
+#define TMP411_N_FACTOR_REG			0x18
+
+static const u8 TMP401_TEMP_MSB[2]			= { 0x00, 0x01 };
+static const u8 TMP401_TEMP_LSB[2]			= { 0x15, 0x10 };
+static const u8 TMP401_TEMP_LOW_LIMIT_MSB_READ[2]	= { 0x06, 0x08 };
+static const u8 TMP401_TEMP_LOW_LIMIT_MSB_WRITE[2]	= { 0x0C, 0x0E };
+static const u8 TMP401_TEMP_LOW_LIMIT_LSB[2]		= { 0x17, 0x14 };
+static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_READ[2]	= { 0x05, 0x07 };
+static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[2]	= { 0x0B, 0x0D };
+static const u8 TMP401_TEMP_HIGH_LIMIT_LSB[2]		= { 0x16, 0x13 };
+/* These are called the THERM limit / hysteresis / mask in the datasheet */
+static const u8 TMP401_TEMP_CRIT_LIMIT[2]		= { 0x20, 0x19 };
+
+static const u8 TMP411_TEMP_LOWEST_MSB[2]		= { 0x30, 0x34 };
+static const u8 TMP411_TEMP_LOWEST_LSB[2]		= { 0x31, 0x35 };
+static const u8 TMP411_TEMP_HIGHEST_MSB[2]		= { 0x32, 0x36 };
+static const u8 TMP411_TEMP_HIGHEST_LSB[2]		= { 0x33, 0x37 };
+
+/* Flags */
+#define TMP401_CONFIG_RANGE		0x04
+#define TMP401_CONFIG_SHUTDOWN		0x40
+#define TMP401_STATUS_LOCAL_CRIT		0x01
+#define TMP401_STATUS_REMOTE_CRIT		0x02
+#define TMP401_STATUS_REMOTE_OPEN		0x04
+#define TMP401_STATUS_REMOTE_LOW		0x08
+#define TMP401_STATUS_REMOTE_HIGH		0x10
+#define TMP401_STATUS_LOCAL_LOW		0x20
+#define TMP401_STATUS_LOCAL_HIGH		0x40
+
+/* Manufacturer / Device ID's */
+#define TMP401_MANUFACTURER_ID			0x55
+#define TMP401_DEVICE_ID			0x11
+#define TMP411_DEVICE_ID			0x12
+
+/*
+ * Functions declarations
+ */
+
+static int tmp401_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int tmp401_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int tmp401_remove(struct i2c_client *client);
+static struct tmp401_data *tmp401_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id tmp401_id[] = {
+	{ "tmp401", tmp401 },
+	{ "tmp411", tmp411 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp401_id);
+
+static struct i2c_driver tmp401_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "tmp401",
+	},
+	.probe		= tmp401_probe,
+	.remove		= tmp401_remove,
+	.id_table	= tmp401_id,
+	.detect		= tmp401_detect,
+	.address_data	= &addr_data,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct tmp401_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+	int kind;
+
+	/* register values */
+	u8 status;
+	u8 config;
+	u16 temp[2];
+	u16 temp_low[2];
+	u16 temp_high[2];
+	u8 temp_crit[2];
+	u8 temp_crit_hyst;
+	u16 temp_lowest[2];
+	u16 temp_highest[2];
+};
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static int tmp401_register_to_temp(u16 reg, u8 config)
+{
+	int temp = reg;
+
+	if (config & TMP401_CONFIG_RANGE)
+		temp -= 64 * 256;
+
+	return (temp * 625 + 80) / 160;
+}
+
+static u16 tmp401_temp_to_register(long temp, u8 config)
+{
+	if (config & TMP401_CONFIG_RANGE) {
+		temp = SENSORS_LIMIT(temp, -64000, 191000);
+		temp += 64000;
+	} else
+		temp = SENSORS_LIMIT(temp, 0, 127000);
+
+	return (temp * 160 + 312) / 625;
+}
+
+static int tmp401_crit_register_to_temp(u8 reg, u8 config)
+{
+	int temp = reg;
+
+	if (config & TMP401_CONFIG_RANGE)
+		temp -= 64;
+
+	return temp * 1000;
+}
+
+static u8 tmp401_crit_temp_to_register(long temp, u8 config)
+{
+	if (config & TMP401_CONFIG_RANGE) {
+		temp = SENSORS_LIMIT(temp, -64000, 191000);
+		temp += 64000;
+	} else
+		temp = SENSORS_LIMIT(temp, 0, 127000);
+
+	return (temp + 500) / 1000;
+}
+
+static ssize_t show_temp_value(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp[index], data->config));
+}
+
+static ssize_t show_temp_min(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_low[index], data->config));
+}
+
+static ssize_t show_temp_max(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_high[index], data->config));
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+			tmp401_crit_register_to_temp(data->temp_crit[index],
+							data->config));
+}
+
+static ssize_t show_temp_crit_hyst(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int temp, index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	mutex_lock(&data->update_lock);
+	temp = tmp401_crit_register_to_temp(data->temp_crit[index],
+						data->config);
+	temp -= data->temp_crit_hyst * 1000;
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t show_temp_lowest(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_lowest[index],
+					data->config));
+}
+
+static ssize_t show_temp_highest(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_highest[index],
+					data->config));
+}
+
+static ssize_t show_status(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int mask = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	if (data->status & mask)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t store_temp_min(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u16 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	reg = tmp401_temp_to_register(val, data->config);
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_LOW_LIMIT_MSB_WRITE[index], reg >> 8);
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_LOW_LIMIT_LSB[index], reg & 0xFF);
+
+	data->temp_low[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u16 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	reg = tmp401_temp_to_register(val, data->config);
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[index], reg >> 8);
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_HIGH_LIMIT_LSB[index], reg & 0xFF);
+
+	data->temp_high[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_temp_crit(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u8 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	reg = tmp401_crit_temp_to_register(val, data->config);
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_CRIT_LIMIT[index], reg);
+
+	data->temp_crit[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int temp, index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u8 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	if (data->config & TMP401_CONFIG_RANGE)
+		val = SENSORS_LIMIT(val, -64000, 191000);
+	else
+		val = SENSORS_LIMIT(val, 0, 127000);
+
+	mutex_lock(&data->update_lock);
+	temp = tmp401_crit_register_to_temp(data->temp_crit[index],
+						data->config);
+	val = SENSORS_LIMIT(val, temp - 255000, temp);
+	reg = ((temp - val) + 500) / 1000;
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_CRIT_HYST, reg);
+
+	data->temp_crit_hyst = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/*
+ * Resets the historical measurements of minimum and maximum temperatures.
+ * This is done by writing any value to any of the minimum/maximum registers
+ * (0x30-0x37).
+ */
+static ssize_t reset_temp_history(struct device *dev,
+	struct device_attribute	*devattr, const char *buf, size_t count)
+{
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	if (val != 1) {
+		dev_err(dev, "temp_reset_history value %ld not"
+			" supported. Use 1 to reset the history!\n", val);
+		return -EINVAL;
+	}
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP411_TEMP_LOWEST_MSB[0], val);
+
+	return count;
+}
+
+static struct sensor_device_attribute tmp401_attr[] = {
+	SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+	SENSOR_ATTR(temp1_min, 0644, show_temp_min, store_temp_min, 0),
+	SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
+	SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0),
+	SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst,
+		    store_temp_crit_hyst, 0),
+	SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_LOCAL_LOW),
+	SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_LOCAL_HIGH),
+	SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_LOCAL_CRIT),
+	SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+	SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1),
+	SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
+	SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1),
+	SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1),
+	SENSOR_ATTR(temp2_fault, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_OPEN),
+	SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_LOW),
+	SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_HIGH),
+	SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_CRIT),
+};
+
+/*
+ * Additional features of the TMP411 chip.
+ * The TMP411 stores the minimum and maximum
+ * temperature measured since power-on, chip-reset, or
+ * minimum and maximum register reset for both the local
+ * and remote channels.
+ */
+static struct sensor_device_attribute tmp411_attr[] = {
+	SENSOR_ATTR(temp1_highest, 0444, show_temp_highest, NULL, 0),
+	SENSOR_ATTR(temp1_lowest, 0444, show_temp_lowest, NULL, 0),
+	SENSOR_ATTR(temp2_highest, 0444, show_temp_highest, NULL, 1),
+	SENSOR_ATTR(temp2_lowest, 0444, show_temp_lowest, NULL, 1),
+	SENSOR_ATTR(temp_reset_history, 0200, NULL, reset_temp_history, 0),
+};
+
+/*
+ * Begin non sysfs callback code (aka Real code)
+ */
+
+static void tmp401_init_client(struct i2c_client *client)
+{
+	int config, config_orig;
+
+	/* Set the conversion rate to 2 Hz */
+	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
+
+	/* Start conversions (disable shutdown if necessary) */
+	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+	if (config < 0) {
+		dev_warn(&client->dev, "Initialization failed!\n");
+		return;
+	}
+
+	config_orig = config;
+	config &= ~TMP401_CONFIG_SHUTDOWN;
+
+	if (config != config_orig)
+		i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
+}
+
+static int tmp401_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/* Detect and identify the chip */
+	if (kind <= 0) {
+		u8 reg;
+
+		reg = i2c_smbus_read_byte_data(client,
+					       TMP401_MANUFACTURER_ID_REG);
+		if (reg != TMP401_MANUFACTURER_ID)
+			return -ENODEV;
+
+		reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
+
+		switch (reg) {
+		case TMP401_DEVICE_ID:
+			kind = tmp401;
+			break;
+		case TMP411_DEVICE_ID:
+			kind = tmp411;
+			break;
+		default:
+			return -ENODEV;
+		}
+
+		reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+		if (reg & 0x1b)
+			return -ENODEV;
+
+		reg = i2c_smbus_read_byte_data(client,
+					       TMP401_CONVERSION_RATE_READ);
+		/* Datasheet says: 0x1-0x6 */
+		if (reg > 15)
+			return -ENODEV;
+	}
+	strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int tmp401_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int i, err = 0;
+	struct tmp401_data *data;
+	const char *names[] = { "TMP401", "TMP411" };
+
+	data = kzalloc(sizeof(struct tmp401_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+	data->kind = id->driver_data;
+
+	/* Initialize the TMP401 chip */
+	tmp401_init_client(client);
+
+	/* Register sysfs hooks */
+	for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++) {
+		err = device_create_file(&client->dev,
+					 &tmp401_attr[i].dev_attr);
+		if (err)
+			goto exit_remove;
+	}
+
+	/* Register aditional tmp411 sysfs hooks */
+	if (data->kind == tmp411) {
+		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) {
+			err = device_create_file(&client->dev,
+						 &tmp411_attr[i].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		goto exit_remove;
+	}
+
+	dev_info(&client->dev, "Detected TI %s chip\n",
+		 names[data->kind - 1]);
+
+	return 0;
+
+exit_remove:
+	tmp401_remove(client); /* will also free data for us */
+	return err;
+}
+
+static int tmp401_remove(struct i2c_client *client)
+{
+	struct tmp401_data *data = i2c_get_clientdata(client);
+	int i;
+
+	if (data->hwmon_dev)
+		hwmon_device_unregister(data->hwmon_dev);
+
+	for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
+		device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
+
+	if (data->kind == tmp411) {
+		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
+			device_remove_file(&client->dev,
+					   &tmp411_attr[i].dev_attr);
+	}
+
+	kfree(data);
+	return 0;
+}
+
+static struct tmp401_data *tmp401_update_device_reg16(
+	struct i2c_client *client, struct tmp401_data *data)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		/*
+		 * High byte must be read first immediately followed
+		 * by the low byte
+		 */
+		data->temp[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_MSB[i]) << 8;
+		data->temp[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LSB[i]);
+		data->temp_low[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
+		data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_LSB[i]);
+		data->temp_high[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
+		data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+		data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_CRIT_LIMIT[i]);
+
+		if (data->kind == tmp411) {
+			data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
+				TMP411_TEMP_LOWEST_MSB[i]) << 8;
+			data->temp_lowest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_LOWEST_LSB[i]);
+
+			data->temp_highest[i] = i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
+			data->temp_highest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_LSB[i]);
+		}
+	}
+	return data;
+}
+
+static struct tmp401_data *tmp401_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tmp401_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
+		data->config = i2c_smbus_read_byte_data(client,
+						TMP401_CONFIG_READ);
+		tmp401_update_device_reg16(client, data);
+
+		data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
+						TMP401_TEMP_CRIT_HYST);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static int __init tmp401_init(void)
+{
+	return i2c_add_driver(&tmp401_driver);
+}
+
+static void __exit tmp401_exit(void)
+{
+	i2c_del_driver(&tmp401_driver);
+}
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(tmp401_init);
+module_exit(tmp401_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index e64b42058b2..0e9746913d2 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -36,6 +36,7 @@
     w83627ehf   10      5       4       3      0x8850 0x88    0x5ca3
                                                0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
+    w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
 */
 
@@ -53,12 +54,13 @@
 #include <asm/io.h>
 #include "lm75.h"
 
-enum kinds { w83627ehf, w83627dhg, w83667hg };
+enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg };
 
 /* used to set data->name = w83627ehf_device_names[data->sio_kind] */
 static const char * w83627ehf_device_names[] = {
 	"w83627ehf",
 	"w83627dhg",
+	"w83627dhg",
 	"w83667hg",
 };
 
@@ -86,6 +88,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
 #define SIO_W83627EHF_ID	0x8850
 #define SIO_W83627EHG_ID	0x8860
 #define SIO_W83627DHG_ID	0xa020
+#define SIO_W83627DHG_P_ID	0xb070
 #define SIO_W83667HG_ID 	0xa510
 #define SIO_ID_MASK		0xFFF0
 
@@ -1517,6 +1520,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 	static const char __initdata sio_name_W83627EHF[] = "W83627EHF";
 	static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
 	static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
+	static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
 	static const char __initdata sio_name_W83667HG[] = "W83667HG";
 
 	u16 val;
@@ -1542,6 +1546,10 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 		sio_data->kind = w83627dhg;
 		sio_name = sio_name_W83627DHG;
 		break;
+	case SIO_W83627DHG_P_ID:
+		sio_data->kind = w83627dhg_p;
+		sio_name = sio_name_W83627DHG_P;
+		break;
 	case SIO_W83667HG_ID:
 		sio_data->kind = w83667hg;
 		sio_name = sio_name_W83667HG;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f1c6ca7e285..0d04d3ebfc2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -211,7 +211,7 @@ config I2C_VIA
 	  will be called i2c-via.
 
 config I2C_VIAPRO
-	tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820"
+	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx"
 	depends on PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -225,8 +225,8 @@ config I2C_VIAPRO
 	    VT8237R/A/S
 	    VT8251
 	    CX700
-	    VX800
-	    VX820
+	    VX800/VX820
+	    VX855/VX875
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.
@@ -298,7 +298,7 @@ config I2C_BLACKFIN_TWI
 config I2C_BLACKFIN_TWI_CLK_KHZ
 	int "Blackfin TWI I2C clock (kHz)"
 	depends on I2C_BLACKFIN_TWI
-	range 10 400
+	range 21 400
 	default 50
 	help
 	  The unit of the TWI clock is kHz.
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index fc548b3d002..26d8987e69b 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -104,9 +104,14 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) | STOP);
 		else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-				iface->cur_msg+1 < iface->msg_num)
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | RSTART);
+		         iface->cur_msg + 1 < iface->msg_num) {
+			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | RSTART | MDIR);
+			else
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+		}
 		SSYNC();
 		/* Clear status */
 		write_INT_STAT(iface, XMTSERV);
@@ -134,9 +139,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 				read_MASTER_CTL(iface) | STOP);
 			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-				iface->cur_msg+1 < iface->msg_num) {
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | RSTART);
+		           iface->cur_msg + 1 < iface->msg_num) {
+			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | RSTART | MDIR);
+			else
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
 			SSYNC();
 		}
 		/* Clear interrupt source */
@@ -196,8 +205,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | MEN | MDIR);
 			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 				iface->cur_msg+1 < iface->msg_num) {
@@ -222,18 +229,19 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			}
 
 			if (iface->pmsg[iface->cur_msg].len <= 255)
-				write_MASTER_CTL(iface,
-				iface->pmsg[iface->cur_msg].len << 6);
+					write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) &
+					(~(0xff << 6))) |
+				(iface->pmsg[iface->cur_msg].len << 6));
 			else {
-				write_MASTER_CTL(iface, 0xff << 6);
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) |
+					(0xff << 6)));
 				iface->manual_stop = 1;
 			}
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			write_MASTER_CTL(iface, read_MASTER_CTL(iface) |
-				MEN | ((iface->read_write == I2C_SMBUS_READ) ?
-				MDIR : 0));
 			SSYNC();
 		} else {
 			iface->result = 1;
@@ -441,6 +449,16 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 		}
 		iface->transPtr = data->block;
 		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = (u8 *)&data->block[1];
+		break;
 	default:
 		return -1;
 	}
@@ -564,7 +582,7 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
-	       I2C_FUNC_I2C;
+	       I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 static struct i2c_algorithm bfin_twi_algorithm = {
@@ -614,6 +632,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	struct i2c_adapter *p_adap;
 	struct resource *res;
 	int rc;
+	unsigned int clkhilow;
 
 	iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
 	if (!iface) {
@@ -675,10 +694,14 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	/* Set TWI internal clock as 10MHz */
 	write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
 
+	/*
+	 * We will not end up with a CLKDIV=0 because no one will specify
+	 * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100)
+	 */
+	clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ;
+
 	/* Set Twi interface clock as specified */
-	write_CLKDIV(iface, ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
-			<< 8) | ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
-			& 0xFF));
+	write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
 
 	/* Enable TWI */
 	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 8b92a4666e0..e4476743f20 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -756,12 +756,12 @@ static int __devinit iic_probe(struct of_device *ofdev,
 		goto error_cleanup;
 	}
 
-	/* Now register all the child nodes */
-	of_register_i2c_devices(adap, np);
-
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
+	/* Now register all the child nodes */
+	of_register_i2c_devices(adap, np);
+
 	return 0;
 
 error_cleanup:
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e5193bf7548..3542c6ba98f 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -216,6 +216,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 	struct ocores_i2c_platform_data *pdata;
 	struct resource *res, *res2;
 	int ret;
+	int i;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -271,6 +272,10 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 		goto add_adapter_failed;
 	}
 
+	/* add in known devices to the bus */
+	for (i = 0; i < pdata->num_devices; i++)
+		i2c_new_device(&i2c->adap, pdata->devices + i);
+
 	return 0;
 
 add_adapter_failed:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ece0125a1ee..c73475dd0fb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -333,8 +333,18 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 
-		/* HSI2C controller internal clk rate should be 19.2 Mhz */
-		internal_clk = 19200;
+		/*
+		 * HSI2C controller internal clk rate should be 19.2 Mhz for
+		 * HS and for all modes on 2430. On 34xx we can use lower rate
+		 * to get longer filter period for better noise suppression.
+		 * The filter is iclk (fclk for HS) period.
+		 */
+		if (dev->speed > 400 || cpu_is_omap_2430())
+			internal_clk = 19200;
+		else if (dev->speed > 100)
+			internal_clk = 9600;
+		else
+			internal_clk = 4000;
 		fclk_rate = clk_get_rate(dev->fclk) / 1000;
 
 		/* Compute prescaler divisor */
@@ -343,17 +353,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
 		/* If configured for High Speed */
 		if (dev->speed > 400) {
+			unsigned long scl;
+
 			/* For first phase of HS mode */
-			fsscll = internal_clk / (400 * 2) - 6;
-			fssclh = internal_clk / (400 * 2) - 6;
+			scl = internal_clk / 400;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
 
 			/* For second phase of HS mode */
-			hsscll = fclk_rate / (dev->speed * 2) - 6;
-			hssclh = fclk_rate / (dev->speed * 2) - 6;
+			scl = fclk_rate / dev->speed;
+			hsscll = scl - (scl / 3) - 7;
+			hssclh = (scl / 3) - 5;
+		} else if (dev->speed > 100) {
+			unsigned long scl;
+
+			/* Fast mode */
+			scl = internal_clk / dev->speed;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
 		} else {
-			/* To handle F/S modes */
-			fsscll = internal_clk / (dev->speed * 2) - 6;
-			fssclh = internal_clk / (dev->speed * 2) - 6;
+			/* Standard mode */
+			fsscll = internal_clk / (dev->speed * 2) - 7;
+			fssclh = internal_clk / (dev->speed * 2) - 5;
 		}
 		scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 		sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index acc7143d965..035a6c7e59d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,10 +34,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+
+/*
+ * I2C register offsets will be shifted 0 or 1 bit left, depending on
+ * different SoCs
+ */
+#define REG_SHIFT_0	(0 << 0)
+#define REG_SHIFT_1	(1 << 0)
+#define REG_SHIFT(d)	((d) & 0x1)
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+	{ "pxa2xx-i2c",		REG_SHIFT_1 },
+	{ "pxa3xx-pwri2c",	REG_SHIFT_0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 
 /*
  * I2C registers and bit definitions
@@ -985,6 +999,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	struct pxa_i2c *i2c;
 	struct resource *res;
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	struct platform_device_id *id = platform_get_device_id(dev);
 	int ret;
 	int irq;
 
@@ -1028,7 +1043,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		ret = -EIO;
 		goto eremap;
 	}
-	i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
+	i2c->reg_shift = REG_SHIFT(id->driver_data);
 
 	i2c->iobase = res->start;
 	i2c->iosize = res_len(res);
@@ -1150,6 +1165,7 @@ static struct platform_driver i2c_pxa_driver = {
 		.name	= "pxa2xx-i2c",
 		.owner	= THIS_MODULE,
 	},
+	.id_table	= i2c_pxa_id_table,
 };
 
 static int __init i2c_adap_pxa_init(void)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1691ef0f1ee..079a312d36f 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -51,6 +51,11 @@ enum s3c24xx_i2c_state {
 	STATE_STOP
 };
 
+enum s3c24xx_i2c_type {
+	TYPE_S3C2410,
+	TYPE_S3C2440,
+};
+
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
@@ -88,8 +93,10 @@ struct s3c24xx_i2c {
 static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
 {
 	struct platform_device *pdev = to_platform_device(i2c->dev);
+	enum s3c24xx_i2c_type type;
 
-	return !strcmp(pdev->name, "s3c2440-i2c");
+	type = platform_get_device_id(pdev)->driver_data;
+	return type == TYPE_S3C2440;
 }
 
 /* s3c24xx_i2c_master_complete
@@ -969,52 +976,41 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
 
 /* device driver for platform bus bits */
 
-static struct platform_driver s3c2410_i2c_driver = {
-	.probe		= s3c24xx_i2c_probe,
-	.remove		= s3c24xx_i2c_remove,
-	.suspend_late	= s3c24xx_i2c_suspend_late,
-	.resume		= s3c24xx_i2c_resume,
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c2410-i2c",
-	},
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-i2c",
+		.driver_data	= TYPE_S3C2410,
+	}, {
+		.name		= "s3c2440-i2c",
+		.driver_data	= TYPE_S3C2440,
+	}, { },
 };
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
-static struct platform_driver s3c2440_i2c_driver = {
+static struct platform_driver s3c24xx_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
 	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
+	.id_table	= s3c24xx_driver_ids,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "s3c2440-i2c",
+		.name	= "s3c-i2c",
 	},
 };
 
 static int __init i2c_adap_s3c_init(void)
 {
-	int ret;
-
-	ret = platform_driver_register(&s3c2410_i2c_driver);
-	if (ret == 0) {
-		ret = platform_driver_register(&s3c2440_i2c_driver);
-		if (ret)
-			platform_driver_unregister(&s3c2410_i2c_driver);
-	}
-
-	return ret;
+	return platform_driver_register(&s3c24xx_i2c_driver);
 }
 subsys_initcall(i2c_adap_s3c_init);
 
 static void __exit i2c_adap_s3c_exit(void)
 {
-	platform_driver_unregister(&s3c2410_i2c_driver);
-	platform_driver_unregister(&s3c2440_i2c_driver);
+	platform_driver_unregister(&s3c24xx_i2c_driver);
 }
 module_exit(i2c_adap_s3c_exit);
 
 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c2410-i2c");
-MODULE_ALIAS("platform:s3c2440-i2c");
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 02e6f724b05..54d810a4d00 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -37,6 +37,7 @@
    VT8251             0x3287             yes
    CX700              0x8324             yes
    VX800/VX820        0x8353             yes
+   VX855/VX875        0x8409             yes
 
    Note: we assume there can only be one device, with one SMBus interface.
 */
@@ -404,6 +405,7 @@ found:
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_VIA_CX700:
 	case PCI_DEVICE_ID_VIA_VX800:
+	case PCI_DEVICE_ID_VIA_VX855:
 	case PCI_DEVICE_ID_VIA_8251:
 	case PCI_DEVICE_ID_VIA_8237:
 	case PCI_DEVICE_ID_VIA_8237A:
@@ -469,6 +471,8 @@ static struct pci_device_id vt596_ids[] = {
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
 	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
+	  .driver_data = SMBBA3 },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1a474acc0dd..7663d57833a 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
 	.owner		= THIS_MODULE,
-	.class		= I2C_CLASS_TV_ANALOG, 
 	.name		= "I2C Voodoo3/Banshee adapter",
 	.algo_data	= &voo_i2c_bit_data,
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 8f8c81eb0ae..02d746c9c47 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -64,21 +64,6 @@ config SENSORS_PCA9539
 	  This driver is deprecated and will be dropped soon. Use
 	  drivers/gpio/pca953x.c instead.
 
-config SENSORS_MAX6875
-	tristate "Maxim MAX6875 Power supply supervisor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Maxim MAX6875
-	  EEPROM-programmable, quad power-supply sequencer/supervisor.
-
-	  This provides an interface to program the EEPROM and reset the chip.
-
-	  This driver also supports the Maxim MAX6874 hex power-supply
-	  sequencer/supervisor if found at a compatible address.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called max6875.
-
 config SENSORS_TSL2550
 	tristate "Taos TSL2550 ambient light sensor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 55a37603718..f4680d16ee3 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 85e2e919d1c..5ed622ee65c 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -29,7 +29,6 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/idr.h>
-#include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
@@ -451,16 +450,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	mutex_lock(&core_lock);
 
-	/* Add the adapter to the driver core.
-	 * If the parent pointer is not set up,
-	 * we add this adapter to the host bus.
-	 */
-	if (adap->dev.parent == NULL) {
-		adap->dev.parent = &platform_bus;
-		pr_debug("I2C adapter driver [%s] forgot to specify "
-			 "physical device\n", adap->name);
-	}
-
 	/* Set default timeout to 1 second if not already set */
 	if (adap->timeout == 0)
 		adap->timeout = HZ;
@@ -1022,7 +1011,8 @@ module_exit(i2c_exit);
  */
 int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
-	int ret;
+	unsigned long orig_jiffies;
+	int ret, try;
 
 	/* REVISIT the fault reporting model here is weak:
 	 *
@@ -1060,7 +1050,15 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			mutex_lock_nested(&adap->bus_lock, adap->level);
 		}
 
-		ret = adap->algo->master_xfer(adap,msgs,num);
+		/* Retry automatically on arbitration loss */
+		orig_jiffies = jiffies;
+		for (ret = 0, try = 0; try <= adap->retries; try++) {
+			ret = adap->algo->master_xfer(adap, msgs, num);
+			if (ret != -EAGAIN)
+				break;
+			if (time_after(jiffies, orig_jiffies + adap->timeout))
+				break;
+		}
 		mutex_unlock(&adap->bus_lock);
 
 		return ret;
@@ -1509,7 +1507,7 @@ struct i2c_adapter* i2c_get_adapter(int id)
 	struct i2c_adapter *adapter;
 
 	mutex_lock(&core_lock);
-	adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
+	adapter = idr_find(&i2c_adapter_idr, id);
 	if (adapter && !try_module_get(adapter->owner))
 		adapter = NULL;
 
@@ -1995,14 +1993,27 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		   char read_write, u8 command, int protocol,
 		   union i2c_smbus_data *data)
 {
+	unsigned long orig_jiffies;
+	int try;
 	s32 res;
 
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC;
 
 	if (adapter->algo->smbus_xfer) {
 		mutex_lock(&adapter->bus_lock);
-		res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
-						command, protocol, data);
+
+		/* Retry automatically on arbitration loss */
+		orig_jiffies = jiffies;
+		for (res = 0, try = 0; try <= adapter->retries; try++) {
+			res = adapter->algo->smbus_xfer(adapter, addr, flags,
+							read_write, command,
+							protocol, data);
+			if (res != -EAGAIN)
+				break;
+			if (time_after(jiffies,
+				       orig_jiffies + adapter->timeout))
+				break;
+		}
 		mutex_unlock(&adapter->bus_lock);
 	} else
 		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf06494bb74..9a5d0aaac9d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@ menuconfig IDE
 	  SMART parameters from disk drives.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ide-core.ko.
+	  module will be called ide-core.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 403d0e4265d..fc0949a8cfd 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -216,6 +216,7 @@ static const struct ide_port_info at91_ide_port_info __initdata = {
 	.host_flags 	= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
 			  IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
 	.pio_mask 	= ATA_PIO6,
+	.chipset	= ide_generic,
 };
 
 /*
@@ -246,8 +247,7 @@ irqreturn_t at91_irq_handler(int irq, void *dev_id)
 static int __init at91_ide_probe(struct platform_device *pdev)
 {
 	int ret;
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	unsigned long tf_base = 0, ctl_base = 0;
@@ -304,10 +304,9 @@ static int __init at91_ide_probe(struct platform_device *pdev)
 		ide_std_init_ports(&hw, tf_base, ctl_base + 6);
 
 	hw.irq = board->irq_pin;
-	hw.chipset = ide_generic;
 	hw.dev = &pdev->dev;
 
-	host = ide_host_alloc(&at91_ide_port_info, hws);
+	host = ide_host_alloc(&at91_ide_port_info, hws, 1);
 	if (!host) {
 		perr("failed to allocate ide host\n");
 		return -ENOMEM;
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 46013644c96..58121bd6c11 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -449,7 +449,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 }
 #endif
 
-static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif)
 {
 	int i;
 	unsigned long *ata_regs = hw->io_ports_array;
@@ -499,6 +499,7 @@ static const struct ide_port_info au1xxx_port_info = {
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	.mwdma_mask		= ATA_MWDMA2,
 #endif
+	.chipset		= ide_au1xxx,
 };
 
 static int au_ide_probe(struct platform_device *dev)
@@ -507,7 +508,7 @@ static int au_ide_probe(struct platform_device *dev)
 	struct resource *res;
 	struct ide_host *host;
 	int ret = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 	char *mode = "MWDMA2";
@@ -548,9 +549,8 @@ static int au_ide_probe(struct platform_device *dev)
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_au1xxx;
 
-	ret = ide_host_add(&au1xxx_port_info, hws, &host);
+	ret = ide_host_add(&au1xxx_port_info, hws, 1, &host);
 	if (ret)
 		goto out;
 
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index d028f8864bc..e3c6a591330 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -121,7 +121,7 @@ static int xsurf_ack_intr(ide_hwif_t *hwif)
     return 1;
 }
 
-static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
 				      unsigned long ctl, unsigned long irq_port,
 				      ide_ack_intr_t *ack_intr)
 {
@@ -139,13 +139,12 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = IRQ_AMIGA_PORTS;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info buddha_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
     /*
@@ -161,7 +160,7 @@ static int __init buddha_init(void)
 
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
-		hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
 			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -225,7 +224,7 @@ fail_base2:
 			hws[i] = &hw[i];
 		}
 
-		ide_host_add(&buddha_port_info, hws, NULL);
+		ide_host_add(&buddha_port_info, hws, i, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 8890276fef7..1683ed5c732 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -708,7 +708,7 @@ static int __init cmd640x_init(void)
 	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	u8 b, cfr;
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[2];
 
 	if (cmd640_vlb && probe_for_cmd640_vlb()) {
 		bus_type = "VLB";
@@ -762,11 +762,9 @@ static int __init cmd640x_init(void)
 
 	ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
 	hw[0].irq = 14;
-	hw[0].chipset = ide_cmd640;
 
 	ide_std_init_ports(&hw[1], 0x170, 0x376);
 	hw[1].irq = 15;
-	hw[1].chipset = ide_cmd640;
 
 	printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
 			 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
@@ -824,7 +822,8 @@ static int __init cmd640x_init(void)
 	cmd640_dump_regs();
 #endif
 
-	return ide_host_add(&cmd640_port_info, hws, NULL);
+	return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1,
+			    NULL);
 }
 
 module_param_named(probe_vlb, cmd640_vlb, bool, 0);
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 87987a7d36c..bd066bb9d61 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -110,7 +110,7 @@ static const struct ide_port_info cyrix_chipset __devinitdata = {
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	const struct ide_port_info *d = &cyrix_chipset;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { NULL, NULL };
 
 	ide_setup_pci_noise(dev, d);
 
@@ -136,7 +136,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
 	hw[0].irq = 14;
 
-	return ide_host_add(d, hws, NULL);
+	return ide_host_add(d, hws, 2, NULL);
 }
 
 static const struct pci_device_id cs5520_pci_tbl[] = {
diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c
index f153b95619b..1e10eba62ce 100644
--- a/drivers/ide/delkin_cb.c
+++ b/drivers/ide/delkin_cb.c
@@ -68,6 +68,7 @@ static const struct ide_port_info delkin_cb_port_info = {
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.init_chipset		= delkin_cb_init_chipset,
+	.chipset		= ide_pci,
 };
 
 static int __devinit
@@ -76,7 +77,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	struct ide_host *host;
 	unsigned long base;
 	int rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	rc = pci_enable_device(dev);
 	if (rc) {
@@ -97,9 +98,8 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;		/* this enables IRQ sharing */
 
-	rc = ide_host_add(&delkin_cb_port_info, hws, &host);
+	rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host);
 	if (rc)
 		goto out_disable;
 
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index 0e2df6755ec..22fa27389c3 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -111,9 +111,10 @@ static const struct ide_port_info falconide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
-static void __init falconide_setup_ports(hw_regs_t *hw)
+static void __init falconide_setup_ports(struct ide_hw *hw)
 {
 	int i;
 
@@ -128,8 +129,6 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
 
 	hw->irq = IRQ_MFP_IDE;
 	hw->ack_intr = NULL;
-
-	hw->chipset = ide_generic;
 }
 
     /*
@@ -139,7 +138,7 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
 static int __init falconide_init(void)
 {
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
@@ -154,7 +153,7 @@ static int __init falconide_init(void)
 
 	falconide_setup_ports(&hw);
 
-	host = ide_host_alloc(&falconide_port_info, hws);
+	host = ide_host_alloc(&falconide_port_info, hws, 1);
 	if (host == NULL) {
 		rc = -ENOMEM;
 		goto err;
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index c7119516c5a..4451a6a5dfe 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -88,7 +88,7 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
     return 1;
 }
 
-static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 				     unsigned long ctl, unsigned long irq_port,
 				     ide_ack_intr_t *ack_intr)
 {
@@ -106,14 +106,13 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = IRQ_AMIGA_PORTS;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info gayle_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
     /*
@@ -126,7 +125,7 @@ static int __init gayle_init(void)
     unsigned long base, ctrlport, irqport;
     ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
-    hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -171,7 +170,7 @@ found:
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, NULL);
+    rc = ide_host_add(&gayle_port_info, hws, i, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);
 
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 0feb66c720e..7ce68ef6b90 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -138,14 +138,6 @@
 #undef	HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
 
-static const char *quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static const char *bad_ata100_5[] = {
 	"IBM-DTLA-307075",
 	"IBM-DTLA-307060",
@@ -729,27 +721,13 @@ static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static void hpt3xx_quirkproc(ide_drive_t *drive)
-{
-	char *m			= (char *)&drive->id[ATA_ID_PROD];
-	const  char **list	= quirk_drives;
-
-	while (*list)
-		if (strstr(m, *list++)) {
-			drive->quirk_list = 1;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
-	if (drive->quirk_list == 0)
+	if ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
 		return;
 
 	if (info->chip_type >= HPT370) {
@@ -1404,7 +1382,6 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
 static const struct ide_port_ops hpt3xx_port_ops = {
 	.set_pio_mode		= hpt3xx_set_pio_mode,
 	.set_dma_mode		= hpt3xx_set_mode,
-	.quirkproc		= hpt3xx_quirkproc,
 	.maskproc		= hpt3xx_maskproc,
 	.mdma_filter		= hpt3xx_mdma_filter,
 	.udma_filter		= hpt3xx_udma_filter,
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 36da913cc55..5af3d0ffaf0 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,8 +65,6 @@ static struct cardinfo icside_cardinfo_v6_2 = {
 };
 
 struct icside_state {
-	unsigned int channel;
-	unsigned int enabled;
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
 	unsigned int sel;
@@ -116,18 +114,11 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
 	struct icside_state *state = ec->irq_data;
 	void __iomem *base = state->irq_port;
 
-	state->enabled = 1;
+	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+	readb(base + ICS_ARCIN_V6_INTROFFSET_2);
 
-	switch (state->channel) {
-	case 0:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
-		break;
-	case 1:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
-		break;
-	}
+	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+	readb(base + ICS_ARCIN_V6_INTROFFSET_1);
 }
 
 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -137,8 +128,6 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
 {
 	struct icside_state *state = ec->irq_data;
 
-	state->enabled = 0;
-
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
 }
@@ -160,44 +149,6 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
 	.irqpending	= icside_irqpending_arcin_v6,
 };
 
-/*
- * Handle routing of interrupts.  This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-	struct icside_state *state = ecard_get_drvdata(ec);
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	state->channel = hwif->channel;
-
-	if (state->enabled && !mask) {
-		switch (hwif->channel) {
-		case 0:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			break;
-		case 1:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			break;
-		}
-	} else {
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-	}
-
-	local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
-	.maskproc		= icside_maskproc,
-};
-
 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 /*
  * SG-DMA support.
@@ -275,7 +226,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 
 static const struct ide_port_ops icside_v6_port_ops = {
 	.set_dma_mode		= icside_set_dma_mode,
-	.maskproc		= icside_maskproc,
 };
 
 static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -320,11 +270,6 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	BUG_ON(dma_channel_active(ec->dma));
 
 	/*
-	 * Ensure that we have the right interrupt routed.
-	 */
-	icside_maskproc(drive, 0);
-
-	/*
 	 * Route the DMA signals to the correct interface.
 	 */
 	writeb(state->sel | hwif->channel, state->ioc_base);
@@ -381,7 +326,7 @@ static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 	return -EOPNOTSUPP;
 }
 
-static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
+static void icside_setup_ports(struct ide_hw *hw, void __iomem *base,
 			       struct cardinfo *info, struct expansion_card *ec)
 {
 	unsigned long port = (unsigned long)base + info->dataoffset;
@@ -398,11 +343,11 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
 
 	hw->irq = ec->irq;
 	hw->dev = &ec->dev;
-	hw->chipset = ide_acorn;
 }
 
 static const struct ide_port_info icside_v5_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_acorn,
 };
 
 static int __devinit
@@ -410,7 +355,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
 	void __iomem *base;
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int ret;
 
 	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
@@ -431,7 +376,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
 
-	host = ide_host_alloc(&icside_v5_port_info, hws);
+	host = ide_host_alloc(&icside_v5_port_info, hws, 1);
 	if (host == NULL)
 		return -ENODEV;
 
@@ -452,11 +397,11 @@ err_free:
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
-	.port_ops		= &icside_v6_no_dma_port_ops,
 	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
 	.swdma_mask		= ATA_SWDMA2,
+	.chipset		= ide_acorn,
 };
 
 static int __devinit
@@ -466,7 +411,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	struct ide_host *host;
 	unsigned int sel = 0;
 	int ret;
-	hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] };
 	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
@@ -506,7 +451,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
 	icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
 
-	host = ide_host_alloc(&d, hws);
+	host = ide_host_alloc(&d, hws, 2);
 	if (host == NULL)
 		return -ENODEV;
 
diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c
index 78aca75a2c4..979d342c338 100644
--- a/drivers/ide/ide-4drives.c
+++ b/drivers/ide/ide-4drives.c
@@ -25,12 +25,13 @@ static const struct ide_port_info ide_4drives_port_info = {
 	.port_ops		= &ide_4drives_port_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA |
 				  IDE_HFLAG_4DRIVES,
+	.chipset		= ide_4drives,
 };
 
 static int __init ide_4drives_init(void)
 {
 	unsigned long base = 0x1f0, ctl = 0x3f6;
-	hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw, &hw };
 
 	if (probe_4drives == 0)
 		return -ENODEV;
@@ -52,9 +53,8 @@ static int __init ide_4drives_init(void)
 
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = 14;
-	hw.chipset = ide_4drives;
 
-	return ide_host_add(&ide_4drives_port_info, hws, NULL);
+	return ide_host_add(&ide_4drives_port_info, hws, 2, NULL);
 }
 
 module_init(ide_4drives_init);
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 757e5956b13..702ef64a0f1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -259,7 +259,7 @@ void ide_retry_pc(ide_drive_t *drive)
 	pc->req_xfer = blk_rq_bytes(sense_rq);
 
 	if (drive->media == ide_tape)
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 
 	/*
 	 * Push back the failed request and put request sense on top
@@ -577,7 +577,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 
 		/*
 		 * If necessary schedule the packet transfer to occur 'timeout'
-		 * miliseconds later in ide_delayed_transfer_pc() after the
+		 * milliseconds later in ide_delayed_transfer_pc() after the
 		 * device says it's ready for a packet.
 		 */
 		if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 9e47f3529d5..527908ff298 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -155,6 +155,7 @@ static const struct ide_port_info idecs_port_info = {
 	.port_ops		= &idecs_port_ops,
 	.host_flags		= IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_pci,
 };
 
 static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
@@ -163,7 +164,7 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
     struct ide_host *host;
     ide_hwif_t *hwif;
     int i, rc;
-    hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+    struct ide_hw hw, *hws[] = { &hw };
 
     if (!request_region(io, 8, DRV_NAME)) {
 	printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
@@ -181,10 +182,9 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
     memset(&hw, 0, sizeof(hw));
     ide_std_init_ports(&hw, io, ctl);
     hw.irq = irq;
-    hw.chipset = ide_pci;
     hw.dev = &handle->dev;
 
-    rc = ide_host_add(&idecs_port_info, hws, &host);
+    rc = ide_host_add(&idecs_port_info, hws, 1, &host);
     if (rc)
 	goto out_release;
 
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index c6f7fcfb9d6..6a1de216970 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -302,14 +302,12 @@ static const struct drive_list_entry hpa_list[] = {
 	{ NULL,		NULL }
 };
 
-static void idedisk_check_hpa(ide_drive_t *drive)
+static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
 {
-	unsigned long long capacity, set_max;
-	int lba48 = ata_id_lba48_enabled(drive->id);
+	u64 capacity, set_max;
 
 	capacity = drive->capacity64;
-
-	set_max = idedisk_read_native_max_address(drive, lba48);
+	set_max  = idedisk_read_native_max_address(drive, lba48);
 
 	if (ide_in_drive_list(drive->id, hpa_list)) {
 		/*
@@ -320,9 +318,31 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 			set_max--;
 	}
 
+	return set_max;
+}
+
+static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
+{
+	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if (set_max)
+		drive->capacity64 = set_max;
+
+	return set_max;
+}
+
+static void idedisk_check_hpa(ide_drive_t *drive)
+{
+	u64 capacity, set_max;
+	int lba48 = ata_id_lba48_enabled(drive->id);
+
+	capacity = drive->capacity64;
+	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
+
 	if (set_max <= capacity)
 		return;
 
+	drive->probed_capacity = set_max;
+
 	printk(KERN_INFO "%s: Host Protected Area detected.\n"
 			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
 			 "\tnative  capacity is %llu sectors (%llu MB)\n",
@@ -330,13 +350,13 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 			 capacity, sectors_to_MB(capacity),
 			 set_max, sectors_to_MB(set_max));
 
-	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
+		return;
 
-	if (set_max) {
-		drive->capacity64 = set_max;
+	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
+	if (set_max)
 		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
 				 drive->name);
-	}
 }
 
 static int ide_disk_get_capacity(ide_drive_t *drive)
@@ -358,6 +378,8 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
 		drive->capacity64 = drive->cyl * drive->head * drive->sect;
 	}
 
+	drive->probed_capacity = drive->capacity64;
+
 	if (lba) {
 		drive->dev_flags |= IDE_DFLAG_LBA;
 
@@ -376,7 +398,7 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
 		       "%llu sectors (%llu MB)\n",
 		       drive->name, (unsigned long long)drive->capacity64,
 		       sectors_to_MB(drive->capacity64));
-		drive->capacity64 = 1ULL << 28;
+		drive->probed_capacity = drive->capacity64 = 1ULL << 28;
 	}
 
 	if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
@@ -392,6 +414,34 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
 	return 0;
 }
 
+static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
+{
+	u64 set = min(capacity, drive->probed_capacity);
+	u16 *id = drive->id;
+	int lba48 = ata_id_lba48_enabled(id);
+
+	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
+	    ata_id_hpa_enabled(id) == 0)
+		goto out;
+
+	/*
+	 * according to the spec the SET MAX ADDRESS command shall be
+	 * immediately preceded by a READ NATIVE MAX ADDRESS command
+	 */
+	capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
+	if (capacity == 0)
+		goto out;
+
+	set = ide_disk_hpa_set_capacity(drive, set, lba48);
+	if (set) {
+		/* needed for ->resume to disable HPA */
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
+		return set;
+	}
+out:
+	return drive->capacity64;
+}
+
 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
 {
 	ide_drive_t *drive = q->queuedata;
@@ -428,14 +478,14 @@ static int set_multcount(ide_drive_t *drive, int arg)
 	if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
 		return -EINVAL;
 
-	if (drive->special.b.set_multmode)
+	if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
 		return -EBUSY;
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
 
 	drive->mult_req = arg;
-	drive->special.b.set_multmode = 1;
+	drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 	error = blk_execute_rq(drive->queue, NULL, rq, 0);
 	blk_put_request(rq);
 
@@ -740,6 +790,7 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
 
 const struct ide_disk_ops ide_ata_disk_ops = {
 	.check		= ide_disk_check,
+	.set_capacity	= ide_disk_set_capacity,
 	.get_capacity	= ide_disk_get_capacity,
 	.setup		= ide_disk_setup,
 	.flush		= ide_disk_flush,
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 001f68f0bb2..219e6fb78dc 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -347,7 +347,6 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
 
 	return mode;
 }
-EXPORT_SYMBOL_GPL(ide_find_dma_mode);
 
 static int ide_tune_dma(ide_drive_t *drive)
 {
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 5d5fb961b5c..2b914197961 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -52,7 +52,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq,
 	}
 
 	if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
-		drive->special.b.recalibrate = 1;
+		drive->special_flags |= IDE_SFLAG_RECALIBRATE;
 
 	++rq->errors;
 
@@ -268,9 +268,8 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
 {
 	int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
 
-	drive->special.all = 0;
-	drive->special.b.set_geometry = legacy;
-	drive->special.b.recalibrate  = legacy;
+	drive->special_flags =
+		legacy ? (IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE) : 0;
 
 	drive->mult_count = 0;
 	drive->dev_flags &= ~IDE_DFLAG_PARKED;
@@ -280,7 +279,7 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
 		drive->mult_req = 0;
 
 	if (drive->mult_req != drive->mult_count)
-		drive->special.b.set_multmode = 1;
+		drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 }
 
 static void pre_reset(ide_drive_t *drive)
@@ -408,8 +407,9 @@ static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
 	/* more than enough time */
 	udelay(10);
 	/* clear SRST, leave nIEN (unless device is on the quirk list) */
-	tp_ops->write_devctl(hwif, (drive->quirk_list == 2 ? 0 : ATA_NIEN) |
-			     ATA_DEVCTL_OBS);
+	tp_ops->write_devctl(hwif,
+		((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) ? 0 : ATA_NIEN) |
+		 ATA_DEVCTL_OBS);
 	/* more than enough time */
 	udelay(10);
 	hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 4b6b71e2cdf..214119026b3 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -287,6 +287,19 @@ static int ide_gd_media_changed(struct gendisk *disk)
 	return ret;
 }
 
+static unsigned long long ide_gd_set_capacity(struct gendisk *disk,
+					      unsigned long long capacity)
+{
+	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+	const struct ide_disk_ops *disk_ops = drive->disk_ops;
+
+	if (disk_ops->set_capacity)
+		return disk_ops->set_capacity(drive, capacity);
+
+	return drive->capacity64;
+}
+
 static int ide_gd_revalidate_disk(struct gendisk *disk)
 {
 	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
@@ -315,6 +328,7 @@ static struct block_device_operations ide_gd_ops = {
 	.locked_ioctl		= ide_gd_ioctl,
 	.getgeo			= ide_gd_getgeo,
 	.media_changed		= ide_gd_media_changed,
+	.set_capacity		= ide_gd_set_capacity,
 	.revalidate_disk	= ide_gd_revalidate_disk
 };
 
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 7812ca0be13..54d7c4685d2 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -29,6 +29,7 @@ MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
 
 static const struct ide_port_info ide_generic_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 #ifdef CONFIG_ARM
@@ -85,7 +86,7 @@ static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
 
 static int __init ide_generic_init(void)
 {
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	unsigned long io_addr;
 	int i, rc = 0, primary = 0, secondary = 0;
 
@@ -132,9 +133,7 @@ static int __init ide_generic_init(void)
 #else
 			hw.irq = legacy_irqs[i];
 #endif
-			hw.chipset = ide_generic;
-
-			rc = ide_host_add(&ide_generic_port_info, hws, NULL);
+			rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL);
 			if (rc) {
 				release_region(io_addr + 0x206, 1);
 				release_region(io_addr, 8);
diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c
index c06ebdc4a13..520f42c5445 100644
--- a/drivers/ide/ide-h8300.c
+++ b/drivers/ide/ide-h8300.c
@@ -64,26 +64,26 @@ static const struct ide_tp_ops h8300_tp_ops = {
 
 #define H8300_IDE_GAP (2)
 
-static inline void hw_setup(hw_regs_t *hw)
+static inline void hw_setup(struct ide_hw *hw)
 {
 	int i;
 
-	memset(hw, 0, sizeof(hw_regs_t));
+	memset(hw, 0, sizeof(*hw));
 	for (i = 0; i <= 7; i++)
 		hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i;
 	hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT;
 	hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ;
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info h8300_port_info = {
 	.tp_ops			= &h8300_tp_ops,
 	.host_flags		= IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int __init h8300_ide_init(void)
 {
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
 
@@ -96,7 +96,7 @@ static int __init h8300_ide_init(void)
 
 	hw_setup(&hw);
 
-	return ide_host_add(&h8300_port_info, hws, NULL);
+	return ide_host_add(&h8300_port_info, hws, 1, NULL);
 
 out_busy:
 	printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index bba4297f2f0..272cc38f6db 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -184,29 +184,42 @@ static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 	tf->command = ATA_CMD_SET_MULTI;
 }
 
-static ide_startstop_t ide_disk_special(ide_drive_t *drive)
+/**
+ *	do_special		-	issue some special commands
+ *	@drive: drive the command is for
+ *
+ *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
+ *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
+ */
+
+static ide_startstop_t do_special(ide_drive_t *drive)
 {
-	special_t *s = &drive->special;
 	struct ide_cmd cmd;
 
+#ifdef DEBUG
+	printk(KERN_DEBUG "%s: %s: 0x%02x\n", drive->name, __func__,
+		drive->special_flags);
+#endif
+	if (drive->media != ide_disk) {
+		drive->special_flags = 0;
+		drive->mult_req = 0;
+		return ide_stopped;
+	}
+
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.protocol = ATA_PROT_NODATA;
 
-	if (s->b.set_geometry) {
-		s->b.set_geometry = 0;
+	if (drive->special_flags & IDE_SFLAG_SET_GEOMETRY) {
+		drive->special_flags &= ~IDE_SFLAG_SET_GEOMETRY;
 		ide_tf_set_specify_cmd(drive, &cmd.tf);
-	} else if (s->b.recalibrate) {
-		s->b.recalibrate = 0;
+	} else if (drive->special_flags & IDE_SFLAG_RECALIBRATE) {
+		drive->special_flags &= ~IDE_SFLAG_RECALIBRATE;
 		ide_tf_set_restore_cmd(drive, &cmd.tf);
-	} else if (s->b.set_multmode) {
-		s->b.set_multmode = 0;
+	} else if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) {
+		drive->special_flags &= ~IDE_SFLAG_SET_MULTMODE;
 		ide_tf_set_setmult_cmd(drive, &cmd.tf);
-	} else if (s->all) {
-		int special = s->all;
-		s->all = 0;
-		printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
-		return ide_stopped;
-	}
+	} else
+		BUG();
 
 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
@@ -217,31 +230,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
 	return ide_started;
 }
 
-/**
- *	do_special		-	issue some special commands
- *	@drive: drive the command is for
- *
- *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
- *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
- *
- *	It used to do much more, but has been scaled back.
- */
-
-static ide_startstop_t do_special (ide_drive_t *drive)
-{
-	special_t *s = &drive->special;
-
-#ifdef DEBUG
-	printk("%s: do_special: 0x%02x\n", drive->name, s->all);
-#endif
-	if (drive->media == ide_disk)
-		return ide_disk_special(drive);
-
-	s->all = 0;
-	drive->mult_req = 0;
-	return ide_stopped;
-}
-
 void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -351,7 +339,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 		printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
 		return startstop;
 	}
-	if (!drive->special.all) {
+
+	if (drive->special_flags == 0) {
 		struct ide_driver *drv;
 
 		/*
@@ -499,11 +488,15 @@ repeat:
 
 		if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) &&
 		    hwif != prev_port) {
+			ide_drive_t *cur_dev =
+				prev_port ? prev_port->cur_dev : NULL;
+
 			/*
 			 * set nIEN for previous port, drives in the
-			 * quirk_list may not like intr setups/cleanups
+			 * quirk list may not like intr setups/cleanups
 			 */
-			if (prev_port && prev_port->cur_dev->quirk_list == 0)
+			if (cur_dev &&
+			    (cur_dev->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
 				prev_port->tp_ops->write_devctl(prev_port,
 								ATA_NIEN |
 								ATA_DEVCTL_OBS);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 06fe002116e..fa047150a1c 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -282,6 +282,29 @@ no_80w:
 	return 0;
 }
 
+static const char *nien_quirk_list[] = {
+	"QUANTUM FIREBALLlct08 08",
+	"QUANTUM FIREBALLP KA6.4",
+	"QUANTUM FIREBALLP KA9.1",
+	"QUANTUM FIREBALLP KX13.6",
+	"QUANTUM FIREBALLP KX20.5",
+	"QUANTUM FIREBALLP KX27.3",
+	"QUANTUM FIREBALLP LM20.4",
+	"QUANTUM FIREBALLP LM20.5",
+	NULL
+};
+
+void ide_check_nien_quirk_list(ide_drive_t *drive)
+{
+	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
+
+	for (list = nien_quirk_list; *list != NULL; list++)
+		if (strstr(m, *list) != NULL) {
+			drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK;
+			return;
+		}
+}
+
 int ide_driveid_update(ide_drive_t *drive)
 {
 	u16 *id;
@@ -311,7 +334,6 @@ int ide_driveid_update(ide_drive_t *drive)
 
 	return 1;
 out_err:
-	SELECT_MASK(drive, 0);
 	if (rc == 2)
 		printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__);
 	kfree(id);
@@ -365,7 +387,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 
 	tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
 
-	if (drive->quirk_list == 2)
+	if (drive->dev_flags & IDE_DFLAG_NIEN_QUIRK)
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c
index 8c5dcbf2254..b9654a7bb7b 100644
--- a/drivers/ide/ide-legacy.c
+++ b/drivers/ide/ide-legacy.c
@@ -1,7 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
 
-static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
+static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw,
 				u8 port_no, const struct ide_port_info *d,
 				unsigned long config)
 {
@@ -33,7 +33,6 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
 
 	ide_std_init_ports(hw, base, ctl);
 	hw->irq = irq;
-	hw->chipset = d->chipset;
 	hw->config = config;
 
 	hws[port_no] = hw;
@@ -41,7 +40,7 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
 
 int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 {
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { NULL, NULL };
 
 	memset(&hw, 0, sizeof(hw));
 
@@ -53,6 +52,6 @@ int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 	    (d->host_flags & IDE_HFLAG_SINGLE))
 		return -ENOENT;
 
-	return ide_host_add(d, hws, NULL);
+	return ide_host_add(d, hws, 2, NULL);
 }
 EXPORT_SYMBOL_GPL(ide_legacy_device_add);
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 6e80b774e88..017b1df3b80 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -29,6 +29,7 @@ static struct pnp_device_id idepnp_devices[] = {
 
 static const struct ide_port_info ide_pnp_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
@@ -36,7 +37,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	struct ide_host *host;
 	unsigned long base, ctl;
 	int rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
 
@@ -62,9 +63,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	memset(&hw, 0, sizeof(hw));
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = pnp_irq(dev, 0);
-	hw.chipset = ide_generic;
 
-	rc = ide_host_add(&ide_pnp_port_info, hws, &host);
+	rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host);
 	if (rc)
 		goto out;
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index c895ed52b2e..f371b0de314 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -97,7 +97,7 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
 		drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
 
 		if (drive->mult_req)
-			drive->special.b.set_multmode = 1;
+			drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 	}
 }
 
@@ -465,23 +465,8 @@ static u8 probe_for_drive(ide_drive_t *drive)
 	int rc;
 	u8 cmd;
 
-	/*
-	 *	In order to keep things simple we have an id
-	 *	block for all drives at all times. If the device
-	 *	is pre ATA or refuses ATA/ATAPI identify we
-	 *	will add faked data to this.
-	 *
-	 *	Also note that 0 everywhere means "can't do X"
-	 */
- 
 	drive->dev_flags &= ~IDE_DFLAG_ID_READ;
 
-	drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
-	if (drive->id == NULL) {
-		printk(KERN_ERR "ide: out of memory for id data.\n");
-		return 0;
-	}
-
 	m = (char *)&drive->id[ATA_ID_PROD];
 	strcpy(m, "UNKNOWN");
 
@@ -497,7 +482,7 @@ static u8 probe_for_drive(ide_drive_t *drive)
 		}
 
 		if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-			goto out_free;
+			return 0;
 
 		/* identification failed? */
 		if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -521,7 +506,7 @@ static u8 probe_for_drive(ide_drive_t *drive)
 	}
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-		goto out_free;
+		return 0;
 
 	/* The drive wasn't being helpful. Add generic info only */
 	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -535,9 +520,6 @@ static u8 probe_for_drive(ide_drive_t *drive)
 	}
 
 	return 1;
-out_free:
-	kfree(drive->id);
-	return 0;
 }
 
 static void hwif_release_dev(struct device *dev)
@@ -702,8 +684,14 @@ static int ide_probe_port(ide_hwif_t *hwif)
 	if (irqd)
 		disable_irq(hwif->irq);
 
-	if (ide_port_wait_ready(hwif) == -EBUSY)
-		printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
+	rc = ide_port_wait_ready(hwif);
+	if (rc == -ENODEV) {
+		printk(KERN_INFO "%s: no devices on the port\n", hwif->name);
+		goto out;
+	} else if (rc == -EBUSY)
+		printk(KERN_ERR "%s: not ready before the probe\n", hwif->name);
+	else
+		rc = -ENODEV;
 
 	/*
 	 * Second drive should only exist if first drive was found,
@@ -714,7 +702,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
 		if (drive->dev_flags & IDE_DFLAG_PRESENT)
 			rc = 0;
 	}
-
+out:
 	/*
 	 * Use cached IRQ number. It might be (and is...) changed by probe
 	 * code above
@@ -732,6 +720,8 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
 	int i;
 
 	ide_port_for_each_present_dev(i, drive, hwif) {
+		ide_check_nien_quirk_list(drive);
+
 		if (port_ops && port_ops->quirkproc)
 			port_ops->quirkproc(drive);
 	}
@@ -817,8 +807,6 @@ static int ide_port_setup_devices(ide_hwif_t *hwif)
 		if (ide_init_queue(drive)) {
 			printk(KERN_ERR "ide: failed to init %s\n",
 					drive->name);
-			kfree(drive->id);
-			drive->id = NULL;
 			drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 			continue;
 		}
@@ -947,9 +935,6 @@ static void drive_release_dev (struct device *dev)
 	blk_cleanup_queue(drive->queue);
 	drive->queue = NULL;
 
-	kfree(drive->id);
-	drive->id = NULL;
-
 	drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 
 	complete(&drive->gendev_rel_comp);
@@ -1035,6 +1020,15 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
 		if (port_ops && port_ops->init_dev)
 			port_ops->init_dev(drive);
 	}
+
+	ide_port_for_each_dev(i, drive, hwif) {
+		/*
+		 * default to PIO Mode 0 before we figure out
+		 * the most suited mode for the attached device
+		 */
+		if (port_ops && port_ops->set_pio_mode)
+			port_ops->set_pio_mode(drive, 0);
+	}
 }
 
 static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
@@ -1042,8 +1036,7 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
 {
 	hwif->channel = port;
 
-	if (d->chipset)
-		hwif->chipset = d->chipset;
+	hwif->chipset = d->chipset ? d->chipset : ide_pci;
 
 	if (d->init_iops)
 		d->init_iops(hwif);
@@ -1124,16 +1117,19 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
 
 	ide_port_for_each_dev(i, drive, hwif) {
 		u8 j = (hwif->index * MAX_DRIVES) + i;
+		u16 *saved_id = drive->id;
 
 		memset(drive, 0, sizeof(*drive));
+		memset(saved_id, 0, SECTOR_SIZE);
+		drive->id = saved_id;
 
 		drive->media			= ide_disk;
 		drive->select			= (i << 4) | ATA_DEVICE_OBS;
 		drive->hwif			= hwif;
 		drive->ready_stat		= ATA_DRDY;
 		drive->bad_wstat		= BAD_W_STAT;
-		drive->special.b.recalibrate	= 1;
-		drive->special.b.set_geometry	= 1;
+		drive->special_flags		= IDE_SFLAG_RECALIBRATE |
+						  IDE_SFLAG_SET_GEOMETRY;
 		drive->name[0]			= 'h';
 		drive->name[1]			= 'd';
 		drive->name[2]			= 'a' + j;
@@ -1168,11 +1164,10 @@ static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
 	ide_port_init_devices_data(hwif);
 }
 
-static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
+static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
 {
 	memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
 	hwif->irq = hw->irq;
-	hwif->chipset = hw->chipset;
 	hwif->dev = hw->dev;
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
 	hwif->ack_intr = hw->ack_intr;
@@ -1233,8 +1228,10 @@ static void ide_port_free_devices(ide_hwif_t *hwif)
 	ide_drive_t *drive;
 	int i;
 
-	ide_port_for_each_dev(i, drive, hwif)
+	ide_port_for_each_dev(i, drive, hwif) {
+		kfree(drive->id);
 		kfree(drive);
+	}
 }
 
 static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
@@ -1248,6 +1245,18 @@ static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
 		if (drive == NULL)
 			goto out_nomem;
 
+		/*
+		 * In order to keep things simple we have an id
+		 * block for all drives at all times. If the device
+		 * is pre ATA or refuses ATA/ATAPI identify we
+		 * will add faked data to this.
+		 *
+		 * Also note that 0 everywhere means "can't do X"
+		 */
+		drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+		if (drive->id == NULL)
+			goto out_nomem;
+
 		hwif->devices[i] = drive;
 	}
 	return 0;
@@ -1257,7 +1266,8 @@ out_nomem:
 	return -ENOMEM;
 }
 
-struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
+struct ide_host *ide_host_alloc(const struct ide_port_info *d,
+				struct ide_hw **hws, unsigned int n_ports)
 {
 	struct ide_host *host;
 	struct device *dev = hws[0] ? hws[0]->dev : NULL;
@@ -1268,7 +1278,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 	if (host == NULL)
 		return NULL;
 
-	for (i = 0; i < MAX_HOST_PORTS; i++) {
+	for (i = 0; i < n_ports; i++) {
 		ide_hwif_t *hwif;
 		int idx;
 
@@ -1288,6 +1298,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 		if (idx < 0) {
 			printk(KERN_ERR "%s: no free slot for interface\n",
 					d ? d->name : "ide");
+			ide_port_free_devices(hwif);
 			kfree(hwif);
 			continue;
 		}
@@ -1344,7 +1355,7 @@ static void ide_disable_port(ide_hwif_t *hwif)
 }
 
 int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
-		      hw_regs_t **hws)
+		      struct ide_hw **hws)
 {
 	ide_hwif_t *hwif, *mate = NULL;
 	int i, j = 0;
@@ -1438,13 +1449,13 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 }
 EXPORT_SYMBOL_GPL(ide_host_register);
 
-int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
-		 struct ide_host **hostp)
+int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws,
+		 unsigned int n_ports, struct ide_host **hostp)
 {
 	struct ide_host *host;
 	int rc;
 
-	host = ide_host_alloc(d, hws);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d9764f0bc82..4b447a8a49d 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -240,18 +240,27 @@ static struct class *idetape_sysfs_class;
 
 static void ide_tape_release(struct device *);
 
-static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
+
+static struct ide_tape_obj *ide_tape_get(struct gendisk *disk, bool cdev,
+					 unsigned int i)
 {
 	struct ide_tape_obj *tape = NULL;
 
 	mutex_lock(&idetape_ref_mutex);
-	tape = ide_drv_g(disk, ide_tape_obj);
+
+	if (cdev)
+		tape = idetape_devs[i];
+	else
+		tape = ide_drv_g(disk, ide_tape_obj);
+
 	if (tape) {
 		if (ide_device_get(tape->drive))
 			tape = NULL;
 		else
 			get_device(&tape->dev);
 	}
+
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
 }
@@ -267,24 +276,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 }
 
 /*
- * The variables below are used for the character device interface. Additional
- * state variables are defined in our ide_drive_t structure.
- */
-static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-
-static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
-{
-	struct ide_tape_obj *tape = NULL;
-
-	mutex_lock(&idetape_ref_mutex);
-	tape = idetape_devs[i];
-	if (tape)
-		get_device(&tape->dev);
-	mutex_unlock(&idetape_ref_mutex);
-	return tape;
-}
-
-/*
  * called on each failed packet command retry to analyze the request sense. We
  * currently do not utilize this information.
  */
@@ -397,7 +388,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 		if (readpos[0] & 0x4) {
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					 "to the tape\n");
-			clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				  &drive->atapi_flags);
 			uptodate = 0;
 			err = IDE_DRV_ERROR_GENERAL;
 		} else {
@@ -406,7 +398,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 
 			tape->partition = readpos[1];
 			tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
-			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				&drive->atapi_flags);
 		}
 	}
 
@@ -656,15 +649,15 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 
 	if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
 	    (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 
 	if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 		drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
 	}
 
-	if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
-	    (stat & ATA_DSC) == 0) {
+	if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) &&
+	    !(stat & ATA_DSC)) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = tape->best_dsc_rw_freq;
@@ -684,7 +677,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
 		idetape_postpone_request(drive);
 		return ide_stopped;
-	}
+	} else
+		drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC;
+
 	if (rq->cmd[13] & REQ_IDETAPE_READ) {
 		pc = &tape->queued_pc;
 		ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
@@ -744,7 +739,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	int load_attempted = 0;
 
 	/* Wait for the tape to become ready */
-	set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+	set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags);
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		if (ide_do_test_unit_ready(drive, disk) == 0)
@@ -820,7 +815,7 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
 		return;
 
-	clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
+	clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags);
 	tape->valid = 0;
 	if (tape->buf != NULL) {
 		kfree(tape->buf);
@@ -1113,7 +1108,8 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		tape->valid = 0;
-		if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+		if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK),
+				       &drive->atapi_flags))
 			++count;
 		ide_tape_discard_merge_buffer(drive, 0);
 	}
@@ -1168,7 +1164,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags))
+		if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -1184,7 +1180,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		/* refill if staging buffer is empty */
 		if (!tape->valid) {
 			/* If we are at a filemark, nothing more to read */
-			if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+			if (test_bit(ilog2(IDE_AFLAG_FILEMARK),
+				     &drive->atapi_flags))
 				break;
 			/* read */
 			if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
@@ -1202,7 +1199,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		done += todo;
 	}
 
-	if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+	if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -1336,7 +1333,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 		ide_tape_discard_merge_buffer(drive, 0);
 		retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
 		if (!retval)
-			clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+				  &drive->atapi_flags);
 		return retval;
 	case MTNOP:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1358,9 +1356,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			    mt_count % tape->blk_size)
 				return -EIO;
 			tape->user_bs_factor = mt_count / tape->blk_size;
-			clear_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_DETECT_BS),
+				  &drive->atapi_flags);
 		} else
-			set_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+			set_bit(ilog2(IDE_AFLAG_DETECT_BS),
+				&drive->atapi_flags);
 		return 0;
 	case MTSEEK:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1486,7 +1486,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 		return -ENXIO;
 
 	lock_kernel();
-	tape = ide_tape_chrdev_get(i);
+	tape = ide_tape_get(NULL, true, i);
 	if (!tape) {
 		unlock_kernel();
 		return -ENXIO;
@@ -1505,20 +1505,20 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDE_AFLAG_BUSY, &drive->atapi_flags)) {
+	if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+		clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags))
+	if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
 	/* Read block size and write protect status from drive. */
@@ -1534,7 +1534,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -1591,15 +1591,17 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 			ide_tape_discard_merge_buffer(drive, 1);
 	}
 
-	if (minor < 128 && test_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags))
+	if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+				    &drive->atapi_flags))
 		(void) idetape_rewind_tape(drive);
+
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
 			if (!ide_set_media_lock(drive, tape->disk, 0))
 				tape->door_locked = DOOR_UNLOCKED;
 		}
 	}
-	clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+	clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -1905,7 +1907,7 @@ static const struct file_operations idetape_fops = {
 
 static int idetape_open(struct block_device *bdev, fmode_t mode)
 {
-	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
+	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk, false, 0);
 
 	if (!tape)
 		return -ENXIO;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index a0c3e1b2f73..75b85a8cd2d 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -98,7 +98,6 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd)
 	if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
 		ide_tf_dump(drive->name, cmd);
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-		SELECT_MASK(drive, 0);
 
 		if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) {
 			u8 data[2] = { cmd->tf.data, cmd->hob.data };
@@ -166,7 +165,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
 	if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
 		if (custom && tf->command == ATA_CMD_SET_MULTI) {
 			drive->mult_req = drive->mult_count = 0;
-			drive->special.b.recalibrate = 1;
+			drive->special_flags |= IDE_SFLAG_RECALIBRATE;
 			(void)ide_dump_status(drive, __func__, stat);
 			return ide_stopped;
 		} else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 92c9b90931e..16d056939f9 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -211,6 +211,11 @@ static unsigned int ide_noflush;
 module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
 MODULE_PARM_DESC(noflush, "disable flush requests for a device");
 
+static unsigned int ide_nohpa;
+
+module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0);
+MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
+
 static unsigned int ide_noprobe;
 
 module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
@@ -281,6 +286,11 @@ static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
 				 drive->name);
 		drive->dev_flags |= IDE_DFLAG_NOFLUSH;
 	}
+	if (ide_nohpa & (1 << i)) {
+		printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
+				 drive->name);
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
+	}
 	if (ide_noprobe & (1 << i)) {
 		printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
 		drive->dev_flags |= IDE_DFLAG_NOPROBE;
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index 051b4ab0f35..ee9b55ecc62 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -21,7 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
+static void __devinit plat_ide_setup_ports(struct ide_hw *hw,
 					   void __iomem *base,
 					   void __iomem *ctrl,
 					   struct pata_platform_info *pdata,
@@ -40,12 +40,11 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
 	hw->io_ports.ctl_addr = (unsigned long)ctrl;
 
 	hw->irq = irq;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info platform_ide_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int __devinit plat_ide_probe(struct platform_device *pdev)
@@ -55,7 +54,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	struct pata_platform_info *pdata;
 	struct ide_host *host;
 	int ret = 0, mmio = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_port_info d = platform_ide_port_info;
 
 	pdata = pdev->dev.platform_data;
@@ -99,7 +98,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	if (mmio)
 		d.host_flags |= IDE_HFLAG_MMIO;
 
-	ret = ide_host_add(&d, hws, &host);
+	ret = ide_host_add(&d, hws, 1, &host);
 	if (ret)
 		goto out;
 
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 4b1718e8328..1447c8c9056 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -62,7 +62,7 @@ int macide_ack_intr(ide_hwif_t* hwif)
 	return 0;
 }
 
-static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 				      int irq, ide_ack_intr_t *ack_intr)
 {
 	int i;
@@ -76,13 +76,12 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = irq;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info macide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
 static const char *mac_ide_name[] =
@@ -97,7 +96,7 @@ static int __init macide_init(void)
 	ide_ack_intr_t *ack_intr;
 	unsigned long base;
 	int irq;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
@@ -127,7 +126,7 @@ static int __init macide_init(void)
 
 	macide_setup_ports(&hw, base, irq, ack_intr);
 
-	return ide_host_add(&macide_port_info, hws, NULL);
+	return ide_host_add(&macide_port_info, hws, 1, NULL);
 }
 
 module_init(macide_init);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index 09d813d313f..3c1dc015215 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -306,6 +306,7 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO,
 	.pio_mask		= ATA_PIO4,
 	.mwdma_mask		= ATA_MWDMA2,
+	.chipset		= ide_palm3710,
 };
 
 static int __init palm_bk3710_probe(struct platform_device *pdev)
@@ -315,7 +316,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 	void __iomem *base;
 	unsigned long rate, mem_size;
 	int i, rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	clk = clk_get(&pdev->dev, "IDECLK");
 	if (IS_ERR(clk))
@@ -363,13 +364,12 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);
 	hw.irq = irq->start;
 	hw.dev = &pdev->dev;
-	hw.chipset = ide_palm3710;
 
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
 							     ATA_UDMA5;
 
 	/* Register the IDE interface with Linux */
-	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
+	rc = ide_host_add(&palm_bk3710_port_info, hws, 1, NULL);
 	if (rc)
 		goto out;
 
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index b68906c3c17..65ba8239e7b 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -40,18 +40,6 @@
 #define DBG(fmt, args...)
 #endif
 
-static const char *pdc_quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP KA9.1",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP KX13.6",
-	"QUANTUM FIREBALLP KX20.5",
-	"QUANTUM FIREBALLP KX27.3",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static u8 max_dma_rate(struct pci_dev *pdev)
 {
 	u8 mode;
@@ -200,19 +188,6 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
 		return ATA_CBL_PATA80;
 }
 
-static void pdcnew_quirkproc(ide_drive_t *drive)
-{
-	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
-	for (list = pdc_quirk_drives; *list != NULL; list++)
-		if (strstr(m, *list) != NULL) {
-			drive->quirk_list = 2;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void pdcnew_reset(ide_drive_t *drive)
 {
 	/*
@@ -473,7 +448,6 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
 static const struct ide_port_ops pdcnew_port_ops = {
 	.set_pio_mode		= pdcnew_set_pio_mode,
 	.set_dma_mode		= pdcnew_set_dma_mode,
-	.quirkproc		= pdcnew_quirkproc,
 	.resetproc		= pdcnew_reset,
 	.cable_detect		= pdcnew_cable_detect,
 };
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index e24ecc87a9b..b6abf7e52ca 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -23,18 +23,6 @@
 
 #define PDC202XX_DEBUG_DRIVE_INFO	0
 
-static const char *pdc_quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP KA9.1",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP KX13.6",
-	"QUANTUM FIREBALLP KX20.5",
-	"QUANTUM FIREBALLP KX27.3",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
 
 static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
@@ -151,19 +139,6 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
 	outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
 }
 
-static void pdc202xx_quirkproc(ide_drive_t *drive)
-{
-	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
-	for (list = pdc_quirk_drives; *list != NULL; list++)
-		if (strstr(m, *list) != NULL) {
-			drive->quirk_list = 2;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void pdc202xx_dma_start(ide_drive_t *drive)
 {
 	if (drive->current_speed > XFER_UDMA_2)
@@ -203,52 +178,6 @@ static int pdc202xx_dma_end(ide_drive_t *drive)
 	return ide_dma_end(drive);
 }
 
-static int pdc202xx_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long high_16	= hwif->extra_base - 16;
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
-	u8 sc1d			= inb(high_16 + 0x001d);
-
-	if (hwif->channel) {
-		/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
-		if ((sc1d & 0x50) == 0x50)
-			goto somebody_else;
-		else if ((sc1d & 0x40) == 0x40)
-			return (dma_stat & 4) == 4;
-	} else {
-		/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
-		if ((sc1d & 0x05) == 0x05)
-			goto somebody_else;
-		else if ((sc1d & 0x04) == 0x04)
-			return (dma_stat & 4) == 4;
-	}
-somebody_else:
-	return (dma_stat & 4) == 4;	/* return 1 if INTR asserted */
-}
-
-static void pdc202xx_reset(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long high_16	= hwif->extra_base - 16;
-	u8 udma_speed_flag	= inb(high_16 | 0x001f);
-
-	printk(KERN_WARNING "PDC202xx: software reset...\n");
-
-	outb(udma_speed_flag | 0x10, high_16 | 0x001f);
-	mdelay(100);
-	outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
-	mdelay(2000);	/* 2 seconds ?! */
-
-	ide_set_max_pio(drive);
-}
-
-static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
-{
-	pdc202xx_reset(drive);
-	ide_dma_lost_irq(drive);
-}
-
 static int init_chipset_pdc202xx(struct pci_dev *dev)
 {
 	unsigned long dmabase = pci_resource_start(dev, 4);
@@ -302,37 +231,22 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 static const struct ide_port_ops pdc20246_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
-	.quirkproc		= pdc202xx_quirkproc,
 };
 
 static const struct ide_port_ops pdc2026x_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
-	.quirkproc		= pdc202xx_quirkproc,
-	.resetproc		= pdc202xx_reset,
 	.cable_detect		= pdc2026x_cable_detect,
 };
 
-static const struct ide_dma_ops pdc20246_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= pdc202xx_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
 static const struct ide_dma_ops pdc2026x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= pdc202xx_dma_start,
 	.dma_end		= pdc202xx_dma_end,
-	.dma_test_irq		= pdc202xx_dma_test_irq,
-	.dma_lost_irq		= pdc202xx_dma_lost_irq,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_clear		= pdc202xx_reset,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
@@ -354,7 +268,7 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_pdc202xx,
 		.port_ops	= &pdc20246_port_ops,
-		.dma_ops	= &pdc20246_dma_ops,
+		.dma_ops	= &sff_dma_ops,
 		.host_flags	= IDE_HFLAGS_PDC202XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index f76e4e6b408..97642a7a79c 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1023,13 +1023,14 @@ static const struct ide_port_info pmac_port_info = {
  * Setup, register & probe an IDE channel driven by this driver, this is
  * called by one of the 2 probe functions (macio or PCI).
  */
-static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
+static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
+					   struct ide_hw *hw)
 {
 	struct device_node *np = pmif->node;
 	const int *bidp;
 	struct ide_host *host;
 	ide_hwif_t *hwif;
-	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
+	struct ide_hw *hws[] = { hw };
 	struct ide_port_info d = pmac_port_info;
 	int rc;
 
@@ -1077,7 +1078,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	/* Make sure we have sane timings */
 	sanitize_timings(pmif);
 
-	host = ide_host_alloc(&d, hws);
+	host = ide_host_alloc(&d, hws, 1);
 	if (host == NULL)
 		return -ENOMEM;
 	hwif = host->ports[0];
@@ -1124,7 +1125,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	return 0;
 }
 
-static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
+static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
 {
 	int i;
 
@@ -1144,7 +1145,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	unsigned long regbase;
 	pmac_ide_hwif_t *pmif;
 	int irq, rc;
-	hw_regs_t hw;
+	struct ide_hw hw;
 
 	pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
 	if (pmif == NULL)
@@ -1268,7 +1269,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	void __iomem *base;
 	unsigned long rbase, rlen;
 	int rc;
-	hw_regs_t hw;
+	struct ide_hw hw;
 
 	np = pci_device_to_OF_node(pdev);
 	if (np == NULL) {
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
index c7934667924..ab49a97023d 100644
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -51,11 +51,11 @@ static int q40ide_default_irq(unsigned long base)
 /*
  * Addresses are pretranslated for Q40 ISA access.
  */
-static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
+static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
 			ide_ack_intr_t *ack_intr,
 			int irq)
 {
-	memset(hw, 0, sizeof(hw_regs_t));
+	memset(hw, 0, sizeof(*hw));
 	/* BIG FAT WARNING: 
 	   assumption: only DATA port is ever used in 16 bit mode */
 	hw->io_ports.data_addr = Q40_ISA_IO_W(base);
@@ -70,8 +70,6 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = irq;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
@@ -119,6 +117,7 @@ static const struct ide_port_info q40ide_port_info = {
 	.tp_ops			= &q40ide_tp_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
 /* 
@@ -136,7 +135,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
 static int __init q40ide_init(void)
 {
     int i;
-    hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
 
     if (!MACH_IS_Q40)
       return -ENODEV;
@@ -163,7 +162,7 @@ static int __init q40ide_init(void)
 	hws[i] = &hw[i];
     }
 
-    return ide_host_add(&q40ide_port_info, hws, NULL);
+    return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
 }
 
 module_init(q40ide_init);
diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c
index d5003ca6980..00f54248f41 100644
--- a/drivers/ide/rapide.c
+++ b/drivers/ide/rapide.c
@@ -13,9 +13,10 @@
 
 static const struct ide_port_info rapide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
-static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
+static void rapide_setup_ports(struct ide_hw *hw, void __iomem *base,
 			       void __iomem *ctrl, unsigned int sz, int irq)
 {
 	unsigned long port = (unsigned long)base;
@@ -35,7 +36,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 	void __iomem *base;
 	struct ide_host *host;
 	int ret;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	ret = ecard_request_resources(ec);
 	if (ret)
@@ -49,10 +50,9 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	memset(&hw, 0, sizeof(hw));
 	rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq);
-	hw.chipset = ide_generic;
 	hw.dev = &ec->dev;
 
-	ret = ide_host_add(&rapide_port_info, hws, &host);
+	ret = ide_host_add(&rapide_port_info, hws, 1, &host);
 	if (ret)
 		goto release;
 
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 5be41f25204..1104bb301eb 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -559,7 +559,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 {
 	struct scc_ports *ports = pci_get_drvdata(dev);
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int i, rc;
 
 	memset(&hw, 0, sizeof(hw));
@@ -567,9 +567,8 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;
 
-	rc = ide_host_add(d, hws, &host);
+	rc = ide_host_add(d, hws, 1, &host);
 	if (rc)
 		return rc;
 
@@ -823,6 +822,7 @@ static const struct ide_port_info scc_chipset __devinitdata = {
 	.host_flags	= IDE_HFLAG_SINGLE,
 	.irq_flags	= IRQF_SHARED,
 	.pio_mask	= ATA_PIO4,
+	.chipset	= ide_pci,
 };
 
 /**
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7a3a12d6e63..ab3db61d2ba 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2000  Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 1995-1998  Mark Lord
- *  Copyright (C)      2007  Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2009  Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
  */
@@ -301,11 +301,11 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
 }
 
 /**
- *	ide_hw_configure	-	configure a hw_regs_t instance
+ *	ide_hw_configure	-	configure a struct ide_hw instance
  *	@dev: PCI device holding interface
  *	@d: IDE port info
  *	@port: port number
- *	@hw: hw_regs_t instance corresponding to this port
+ *	@hw: struct ide_hw instance corresponding to this port
  *
  *	Perform the initial set up for the hardware interface structure. This
  *	is done per interface port rather than per PCI device. There may be
@@ -315,7 +315,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
  */
 
 static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
-			    unsigned int port, hw_regs_t *hw)
+			    unsigned int port, struct ide_hw *hw)
 {
 	unsigned long ctl = 0, base = 0;
 
@@ -344,7 +344,6 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
 
 	memset(hw, 0, sizeof(*hw));
 	hw->dev = &dev->dev;
-	hw->chipset = d->chipset ? d->chipset : ide_pci;
 	ide_std_init_ports(hw, base, ctl | 2);
 
 	return 0;
@@ -446,8 +445,8 @@ out:
  *	ide_pci_setup_ports	-	configure ports/devices on PCI IDE
  *	@dev: PCI device
  *	@d: IDE port info
- *	@hw: hw_regs_t instances corresponding to this PCI IDE device
- *	@hws: hw_regs_t pointers table to update
+ *	@hw: struct ide_hw instances corresponding to this PCI IDE device
+ *	@hws: struct ide_hw pointers table to update
  *
  *	Scan the interfaces attached to this device and do any
  *	necessary per port setup. Attach the devices and ask the
@@ -459,7 +458,7 @@ out:
  */
 
 void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
-			 hw_regs_t *hw, hw_regs_t **hws)
+			 struct ide_hw *hw, struct ide_hw **hws)
 {
 	int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
 	u8 tmp;
@@ -535,61 +534,15 @@ out:
 	return ret;
 }
 
-int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
-		     void *priv)
-{
-	struct ide_host *host;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-	int ret;
-
-	ret = ide_setup_pci_controller(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
-
-	host = ide_host_alloc(d, hws);
-	if (host == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	host->dev[0] = &dev->dev;
-
-	host->host_priv = priv;
-
-	host->irq_flags = IRQF_SHARED;
-
-	pci_set_drvdata(dev, host);
-
-	ret = do_ide_setup_pci_device(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	/* fixup IRQ */
-	if (ide_pci_is_in_compatibility_mode(dev)) {
-		hw[0].irq = pci_get_legacy_ide_irq(dev, 0);
-		hw[1].irq = pci_get_legacy_ide_irq(dev, 1);
-	} else
-		hw[1].irq = hw[0].irq = ret;
-
-	ret = ide_host_register(host, d, hws);
-	if (ret)
-		ide_host_free(host);
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ide_pci_init_one);
-
 int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 		     const struct ide_port_info *d, void *priv)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
 	struct ide_host *host;
-	int ret, i;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+	int ret, i, n_ports = dev2 ? 4 : 2;
+	struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = ide_setup_pci_controller(pdev[i], d, !i);
 		if (ret < 0)
 			goto out;
@@ -597,23 +550,24 @@ int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 		ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
 	}
 
-	host = ide_host_alloc(d, hws);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	host->dev[0] = &dev1->dev;
-	host->dev[1] = &dev2->dev;
+	if (dev2)
+		host->dev[1] = &dev2->dev;
 
 	host->host_priv = priv;
-
 	host->irq_flags = IRQF_SHARED;
 
 	pci_set_drvdata(pdev[0], host);
-	pci_set_drvdata(pdev[1], host);
+	if (dev2)
+		pci_set_drvdata(pdev[1], host);
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -639,6 +593,13 @@ out:
 }
 EXPORT_SYMBOL_GPL(ide_pci_init_two);
 
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+		     void *priv)
+{
+	return ide_pci_init_two(dev, NULL, d, priv);
+}
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
+
 void ide_pci_remove(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index e5d2a48a84d..5f37f168f94 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -91,7 +91,7 @@ typedef struct {
 
 
 static void
-sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
+sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
 			unsigned long ctrl_port, unsigned long irq_port)
 {
 	unsigned long reg = data_port;
@@ -546,7 +546,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
@@ -575,13 +575,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	memset(&hw, 0, sizeof(hw));
 	sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
 	hw.irq = dev->irq;
-	hw.chipset = ide_pci;
 	hw.dev = &dev->dev;
 
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
+	rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
 	if (!rc)
 		return 0;
 
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index e4973cd1fba..bd82d228608 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -451,8 +451,8 @@ static int sil_sata_reset_poll(ide_drive_t *drive)
 static void sil_sata_pre_reset(ide_drive_t *drive)
 {
 	if (drive->media == ide_disk) {
-		drive->special.b.set_geometry = 0;
-		drive->special.b.recalibrate = 0;
+		drive->special_flags &=
+			~(IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE);
 	}
 }
 
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index b0a46062533..0924abff52f 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -10,7 +10,7 @@
  * with the timing registers setup.
  *  -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
  *
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@mvista.com>
  * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  */
 
@@ -146,14 +146,15 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
 	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
 	u8 dma_cmd;
 
-	printk("sl82c105: lost IRQ, resetting host\n");
+	printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n");
 
 	/*
 	 * Check the raw interrupt from the drive.
 	 */
 	pci_read_config_dword(dev, 0x40, &val);
 	if (val & mask)
-		printk("sl82c105: drive was requesting IRQ, but host lost it\n");
+		printk(KERN_INFO "sl82c105: drive was requesting IRQ, "
+		       "but host lost it\n");
 
 	/*
 	 * Was DMA enabled?  If so, disable it - we're resetting the
@@ -162,7 +163,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
 	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	if (dma_cmd & 1) {
 		outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
-		printk("sl82c105: DMA was enabled\n");
+		printk(KERN_INFO "sl82c105: DMA was enabled\n");
 	}
 
 	sl82c105_reset_host(dev);
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index e33d764e294..ea89fddeed9 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -130,8 +130,7 @@ static const struct ide_port_info tx4938ide_port_info __initdata = {
 
 static int __init tx4938ide_probe(struct platform_device *pdev)
 {
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	struct tx4938ide_platform_info *pdata = pdev->dev.platform_data;
@@ -183,7 +182,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev)
 		tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
 	else
 		d.port_ops = NULL;
-	ret = ide_host_add(&d, hws, &host);
+	ret = ide_host_add(&d, hws, 1, &host);
 	if (!ret)
 		platform_set_drvdata(pdev, host);
 	return ret;
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 5ca76224f6d..64b58ecc3f0 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -537,8 +537,7 @@ static const struct ide_port_info tx4939ide_port_info __initdata = {
 
 static int __init tx4939ide_probe(struct platform_device *pdev)
 {
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	int irq, ret;
@@ -581,7 +580,7 @@ static int __init tx4939ide_probe(struct platform_device *pdev)
 	hw.dev = &pdev->dev;
 
 	pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq);
-	host = ide_host_alloc(&tx4939ide_port_info, hws);
+	host = ide_host_alloc(&tx4939ide_port_info, hws, 1);
 	if (!host)
 		return -ENOMEM;
 	/* use extra_base for base address of the all registers */
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 823a6297a1a..2cd00b5b45b 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -1789,12 +1789,13 @@ static int dv1394_open(struct inode *inode, struct file *file)
 	} else {
 		/* look up the card by ID */
 		unsigned long flags;
+		int idx = ieee1394_file_to_instance(file);
 
 		spin_lock_irqsave(&dv1394_cards_lock, flags);
 		if (!list_empty(&dv1394_cards)) {
 			struct video_card *p;
 			list_for_each_entry(p, &dv1394_cards, list) {
-				if ((p->id) == ieee1394_file_to_instance(file)) {
+				if ((p->id) == idx) {
 					video = p;
 					break;
 				}
@@ -1803,7 +1804,7 @@ static int dv1394_open(struct inode *inode, struct file *file)
 		spin_unlock_irqrestore(&dv1394_cards_lock, flags);
 
 		if (!video) {
-			debug_printk("dv1394: OHCI card %d not found", ieee1394_file_to_instance(file));
+			debug_printk("dv1394: OHCI card %d not found", idx);
 			return -ENODEV;
 		}
 
diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index 21d50f73a21..28b9f58bafd 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -5,6 +5,7 @@
 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/types.h>
+#include <linux/cdev.h>
 #include <asm/atomic.h>
 
 #include "hosts.h"
@@ -155,7 +156,10 @@ void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size,
  */
 static inline unsigned char ieee1394_file_to_instance(struct file *file)
 {
-	return file->f_path.dentry->d_inode->i_cindex;
+	int idx = cdev_index(file->f_path.dentry->d_inode);
+	if (idx < 0)
+		idx = 0;
+	return idx;
 }
 
 extern int hpsb_disable_irm;
diff --git a/drivers/ieee802154/Kconfig b/drivers/ieee802154/Kconfig
new file mode 100644
index 00000000000..9b9f43aa2f8
--- /dev/null
+++ b/drivers/ieee802154/Kconfig
@@ -0,0 +1,22 @@
+menuconfig IEEE802154_DRIVERS
+	tristate "IEEE 802.15.4 drivers"
+	depends on NETDEVICES && IEEE802154
+	default y
+	---help---
+	  Say Y here to get to see options for IEEE 802.15.4 Low-Rate
+	  Wireless Personal Area Network device drivers. This option alone
+	  does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and
+	  disabled.
+
+config IEEE802154_FAKEHARD
+	tristate "Fake LR-WPAN driver with several interconnected devices"
+	depends on  IEEE802154_DRIVERS
+	---help---
+	  Say Y here to enable the fake driver that serves as an example
+          of HardMAC device driver.
+
+          This driver can also be built as a module. To do so say M here.
+	  The module will be called 'fakehard'.
+
diff --git a/drivers/ieee802154/Makefile b/drivers/ieee802154/Makefile
new file mode 100644
index 00000000000..e0e8e1a184f
--- /dev/null
+++ b/drivers/ieee802154/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_IEEE802154_FAKEHARD) += fakehard.o
+
+EXTRA_CFLAGS += -DDEBUG -DCONFIG_FFD
diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
new file mode 100644
index 00000000000..0384144c0b3
--- /dev/null
+++ b/drivers/ieee802154/fakehard.c
@@ -0,0 +1,270 @@
+/*
+ * Sample driver for HardMAC IEEE 802.15.4 devices
+ *
+ * Copyright (C) 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/netdevice.h>
+#include <net/ieee802154/mac_def.h>
+#include <net/ieee802154/nl802154.h>
+
+static u16 fake_get_pan_id(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0xeba1;
+}
+
+static u16 fake_get_short_addr(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x1;
+}
+
+static u8 fake_get_dsn(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x00; /* DSN are implemented in HW, so return just 0 */
+}
+
+static u8 fake_get_bsn(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x00; /* BSN are implemented in HW, so return just 0 */
+}
+
+static int fake_assoc_req(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 channel, u8 cap)
+{
+	/* We simply emulate it here */
+	return ieee802154_nl_assoc_confirm(dev, fake_get_short_addr(dev),
+			IEEE802154_SUCCESS);
+}
+
+static int fake_assoc_resp(struct net_device *dev,
+		struct ieee802154_addr *addr, u16 short_addr, u8 status)
+{
+	return 0;
+}
+
+static int fake_disassoc_req(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason)
+{
+	return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
+}
+
+static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
+				u8 channel,
+				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
+				u8 coord_realign)
+{
+	return 0;
+}
+
+static int fake_scan_req(struct net_device *dev, u8 type, u32 channels,
+		u8 duration)
+{
+	u8 edl[27] = {};
+	return ieee802154_nl_scan_confirm(dev, IEEE802154_SUCCESS, type,
+			channels,
+			type == IEEE802154_MAC_SCAN_ED ? edl : NULL);
+}
+
+static struct ieee802154_mlme_ops fake_mlme = {
+	.assoc_req = fake_assoc_req,
+	.assoc_resp = fake_assoc_resp,
+	.disassoc_req = fake_disassoc_req,
+	.start_req = fake_start_req,
+	.scan_req = fake_scan_req,
+
+	.get_pan_id = fake_get_pan_id,
+	.get_short_addr = fake_get_short_addr,
+	.get_dsn = fake_get_dsn,
+	.get_bsn = fake_get_bsn,
+};
+
+static int ieee802154_fake_open(struct net_device *dev)
+{
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int ieee802154_fake_close(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+	return 0;
+}
+
+static int ieee802154_fake_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->iif = dev->ifindex;
+	skb->dev = dev;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	dev->trans_start = jiffies;
+
+	/* FIXME: do hardware work here ... */
+
+	return 0;
+}
+
+
+static int ieee802154_fake_ioctl(struct net_device *dev, struct ifreq *ifr,
+		int cmd)
+{
+	struct sockaddr_ieee802154 *sa =
+		(struct sockaddr_ieee802154 *)&ifr->ifr_addr;
+	u16 pan_id, short_addr;
+
+	switch (cmd) {
+	case SIOCGIFADDR:
+		/* FIXME: fixed here, get from device IRL */
+		pan_id = fake_get_pan_id(dev);
+		short_addr = fake_get_short_addr(dev);
+		if (pan_id == IEEE802154_PANID_BROADCAST ||
+		    short_addr == IEEE802154_ADDR_BROADCAST)
+			return -EADDRNOTAVAIL;
+
+		sa->family = AF_IEEE802154;
+		sa->addr.addr_type = IEEE802154_ADDR_SHORT;
+		sa->addr.pan_id = pan_id;
+		sa->addr.short_addr = short_addr;
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int ieee802154_fake_mac_addr(struct net_device *dev, void *p)
+{
+	return -EBUSY; /* HW address is built into the device */
+}
+
+static const struct net_device_ops fake_ops = {
+	.ndo_open		= ieee802154_fake_open,
+	.ndo_stop		= ieee802154_fake_close,
+	.ndo_start_xmit		= ieee802154_fake_xmit,
+	.ndo_do_ioctl		= ieee802154_fake_ioctl,
+	.ndo_set_mac_address	= ieee802154_fake_mac_addr,
+};
+
+
+static void ieee802154_fake_setup(struct net_device *dev)
+{
+	dev->addr_len		= IEEE802154_ADDR_LEN;
+	memset(dev->broadcast, 0xff, IEEE802154_ADDR_LEN);
+	dev->features		= NETIF_F_NO_CSUM;
+	dev->needed_tailroom	= 2; /* FCS */
+	dev->mtu		= 127;
+	dev->tx_queue_len	= 10;
+	dev->type		= ARPHRD_IEEE802154;
+	dev->flags		= IFF_NOARP | IFF_BROADCAST;
+	dev->watchdog_timeo	= 0;
+}
+
+
+static int __devinit ieee802154fake_probe(struct platform_device *pdev)
+{
+	struct net_device *dev =
+		alloc_netdev(0, "hardwpan%d", ieee802154_fake_setup);
+	int err;
+
+	if (!dev)
+		return -ENOMEM;
+
+	memcpy(dev->dev_addr, "\xba\xbe\xca\xfe\xde\xad\xbe\xef",
+			dev->addr_len);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+	dev->netdev_ops = &fake_ops;
+	dev->ml_priv = &fake_mlme;
+
+	/*
+	 * If the name is a format string the caller wants us to do a
+	 * name allocation.
+	 */
+	if (strchr(dev->name, '%')) {
+		err = dev_alloc_name(dev, dev->name);
+		if (err < 0)
+			goto out;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	platform_set_drvdata(pdev, dev);
+
+	err = register_netdev(dev);
+	if (err < 0)
+		goto out;
+
+
+	dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
+	return 0;
+
+out:
+	unregister_netdev(dev);
+	return err;
+}
+
+static int __devexit ieee802154fake_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	unregister_netdev(dev);
+	free_netdev(dev);
+	return 0;
+}
+
+static struct platform_device *ieee802154fake_dev;
+
+static struct platform_driver ieee802154fake_driver = {
+	.probe = ieee802154fake_probe,
+	.remove = __devexit_p(ieee802154fake_remove),
+	.driver = {
+			.name = "ieee802154hardmac",
+			.owner = THIS_MODULE,
+	},
+};
+
+static __init int fake_init(void)
+{
+	ieee802154fake_dev = platform_device_register_simple(
+			"ieee802154hardmac", -1, NULL, 0);
+	return platform_driver_register(&ieee802154fake_driver);
+}
+
+static __exit void fake_exit(void)
+{
+	platform_driver_unregister(&ieee802154fake_driver);
+	platform_device_unregister(ieee802154fake_dev);
+}
+
+module_init(fake_init);
+module_exit(fake_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/infiniband/hw/amso1100/c2_cq.c b/drivers/infiniband/hw/amso1100/c2_cq.c
index bb17cce3cb5..f5c45b194f5 100644
--- a/drivers/infiniband/hw/amso1100/c2_cq.c
+++ b/drivers/infiniband/hw/amso1100/c2_cq.c
@@ -133,7 +133,7 @@ static inline int c2_poll_one(struct c2_dev *c2dev,
 	struct c2_qp *qp;
 	int is_recv = 0;
 
-	ce = (struct c2wr_ce *) c2_mq_consume(&cq->mq);
+	ce = c2_mq_consume(&cq->mq);
 	if (!ce) {
 		return -EAGAIN;
 	}
@@ -146,7 +146,7 @@ static inline int c2_poll_one(struct c2_dev *c2dev,
 	while ((qp =
 		(struct c2_qp *) (unsigned long) ce->qp_user_context) == NULL) {
 		c2_mq_free(&cq->mq);
-		ce = (struct c2wr_ce *) c2_mq_consume(&cq->mq);
+		ce = c2_mq_consume(&cq->mq);
 		if (!ce)
 			return -EAGAIN;
 	}
diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h
index ff9be1a1310..32e3b1461d8 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_wr.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h
@@ -176,7 +176,7 @@ struct t3_send_wr {
 	struct t3_sge sgl[T3_MAX_SGE];	/* 4+ */
 };
 
-#define T3_MAX_FASTREG_DEPTH 24
+#define T3_MAX_FASTREG_DEPTH 10
 #define T3_MAX_FASTREG_FRAG 10
 
 struct t3_fastreg_wr {
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 160ef482712..e2a63214008 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -40,6 +40,7 @@
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
+#include <linux/inetdevice.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1152,12 +1153,39 @@ static int iwch_query_device(struct ib_device *ibdev,
 static int iwch_query_port(struct ib_device *ibdev,
 			   u8 port, struct ib_port_attr *props)
 {
+	struct iwch_dev *dev;
+	struct net_device *netdev;
+	struct in_device *inetdev;
+
 	PDBG("%s ibdev %p\n", __func__, ibdev);
 
+	dev = to_iwch_dev(ibdev);
+	netdev = dev->rdev.port_info.lldevs[port-1];
+
 	memset(props, 0, sizeof(struct ib_port_attr));
 	props->max_mtu = IB_MTU_4096;
-	props->active_mtu = IB_MTU_2048;
-	props->state = IB_PORT_ACTIVE;
+	if (netdev->mtu >= 4096)
+		props->active_mtu = IB_MTU_4096;
+	else if (netdev->mtu >= 2048)
+		props->active_mtu = IB_MTU_2048;
+	else if (netdev->mtu >= 1024)
+		props->active_mtu = IB_MTU_1024;
+	else if (netdev->mtu >= 512)
+		props->active_mtu = IB_MTU_512;
+	else
+		props->active_mtu = IB_MTU_256;
+
+	if (!netif_carrier_ok(netdev))
+		props->state = IB_PORT_DOWN;
+	else {
+		inetdev = in_dev_get(netdev);
+		if (inetdev->ifa_list)
+			props->state = IB_PORT_ACTIVE;
+		else
+			props->state = IB_PORT_INIT;
+		in_dev_put(inetdev);
+	}
+
 	props->port_cap_flags =
 	    IB_PORT_CM_SUP |
 	    IB_PORT_SNMP_TUNNEL_SUP |
diff --git a/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h b/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h
index 1798e6466bd..689c35786dd 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h
@@ -165,7 +165,6 @@ struct hcp_modify_qp_control_block {
 #define MQPCB_MASK_ALT_P_KEY_IDX                EHCA_BMASK_IBM( 7,  7)
 #define MQPCB_MASK_RDMA_ATOMIC_CTRL             EHCA_BMASK_IBM( 8,  8)
 #define MQPCB_MASK_QP_STATE                     EHCA_BMASK_IBM( 9,  9)
-#define MQPCB_QP_STATE                          EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_RDMA_NR_ATOMIC_RESP_RES      EHCA_BMASK_IBM(11, 11)
 #define MQPCB_MASK_PATH_MIGRATION_STATE         EHCA_BMASK_IBM(12, 12)
 #define MQPCB_MASK_RDMA_ATOMIC_OUTST_DEST_QP    EHCA_BMASK_IBM(13, 13)
@@ -176,60 +175,33 @@ struct hcp_modify_qp_control_block {
 #define MQPCB_MASK_RETRY_COUNT                  EHCA_BMASK_IBM(18, 18)
 #define MQPCB_MASK_TIMEOUT                      EHCA_BMASK_IBM(19, 19)
 #define MQPCB_MASK_PATH_MTU                     EHCA_BMASK_IBM(20, 20)
-#define MQPCB_PATH_MTU                          EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_MAX_STATIC_RATE              EHCA_BMASK_IBM(21, 21)
-#define MQPCB_MAX_STATIC_RATE                   EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_DLID                         EHCA_BMASK_IBM(22, 22)
-#define MQPCB_DLID                              EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_RNR_RETRY_COUNT              EHCA_BMASK_IBM(23, 23)
-#define MQPCB_RNR_RETRY_COUNT                   EHCA_BMASK_IBM(29, 31)
 #define MQPCB_MASK_SOURCE_PATH_BITS             EHCA_BMASK_IBM(24, 24)
-#define MQPCB_SOURCE_PATH_BITS                  EHCA_BMASK_IBM(25, 31)
 #define MQPCB_MASK_TRAFFIC_CLASS                EHCA_BMASK_IBM(25, 25)
-#define MQPCB_TRAFFIC_CLASS                     EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_HOP_LIMIT                    EHCA_BMASK_IBM(26, 26)
-#define MQPCB_HOP_LIMIT                         EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_SOURCE_GID_IDX               EHCA_BMASK_IBM(27, 27)
-#define MQPCB_SOURCE_GID_IDX                    EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_FLOW_LABEL                   EHCA_BMASK_IBM(28, 28)
-#define MQPCB_FLOW_LABEL                        EHCA_BMASK_IBM(12, 31)
 #define MQPCB_MASK_DEST_GID                     EHCA_BMASK_IBM(30, 30)
 #define MQPCB_MASK_SERVICE_LEVEL_AL             EHCA_BMASK_IBM(31, 31)
-#define MQPCB_SERVICE_LEVEL_AL                  EHCA_BMASK_IBM(28, 31)
 #define MQPCB_MASK_SEND_GRH_FLAG_AL             EHCA_BMASK_IBM(32, 32)
-#define MQPCB_SEND_GRH_FLAG_AL                  EHCA_BMASK_IBM(31, 31)
 #define MQPCB_MASK_RETRY_COUNT_AL               EHCA_BMASK_IBM(33, 33)
-#define MQPCB_RETRY_COUNT_AL                    EHCA_BMASK_IBM(29, 31)
 #define MQPCB_MASK_TIMEOUT_AL                   EHCA_BMASK_IBM(34, 34)
-#define MQPCB_TIMEOUT_AL                        EHCA_BMASK_IBM(27, 31)
 #define MQPCB_MASK_MAX_STATIC_RATE_AL           EHCA_BMASK_IBM(35, 35)
-#define MQPCB_MAX_STATIC_RATE_AL                EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_DLID_AL                      EHCA_BMASK_IBM(36, 36)
-#define MQPCB_DLID_AL                           EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_RNR_RETRY_COUNT_AL           EHCA_BMASK_IBM(37, 37)
-#define MQPCB_RNR_RETRY_COUNT_AL                EHCA_BMASK_IBM(29, 31)
 #define MQPCB_MASK_SOURCE_PATH_BITS_AL          EHCA_BMASK_IBM(38, 38)
-#define MQPCB_SOURCE_PATH_BITS_AL               EHCA_BMASK_IBM(25, 31)
 #define MQPCB_MASK_TRAFFIC_CLASS_AL             EHCA_BMASK_IBM(39, 39)
-#define MQPCB_TRAFFIC_CLASS_AL                  EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_HOP_LIMIT_AL                 EHCA_BMASK_IBM(40, 40)
-#define MQPCB_HOP_LIMIT_AL                      EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_SOURCE_GID_IDX_AL            EHCA_BMASK_IBM(41, 41)
-#define MQPCB_SOURCE_GID_IDX_AL                 EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_FLOW_LABEL_AL                EHCA_BMASK_IBM(42, 42)
-#define MQPCB_FLOW_LABEL_AL                     EHCA_BMASK_IBM(12, 31)
 #define MQPCB_MASK_DEST_GID_AL                  EHCA_BMASK_IBM(44, 44)
 #define MQPCB_MASK_MAX_NR_OUTST_SEND_WR         EHCA_BMASK_IBM(45, 45)
-#define MQPCB_MAX_NR_OUTST_SEND_WR              EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_MAX_NR_OUTST_RECV_WR         EHCA_BMASK_IBM(46, 46)
-#define MQPCB_MAX_NR_OUTST_RECV_WR              EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_DISABLE_ETE_CREDIT_CHECK     EHCA_BMASK_IBM(47, 47)
-#define MQPCB_DISABLE_ETE_CREDIT_CHECK          EHCA_BMASK_IBM(31, 31)
-#define MQPCB_QP_NUMBER                         EHCA_BMASK_IBM( 8, 31)
 #define MQPCB_MASK_QP_ENABLE                    EHCA_BMASK_IBM(48, 48)
-#define MQPCB_QP_ENABLE                         EHCA_BMASK_IBM(31, 31)
 #define MQPCB_MASK_CURR_SRQ_LIMIT               EHCA_BMASK_IBM(49, 49)
-#define MQPCB_CURR_SRQ_LIMIT                    EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_QP_AFF_ASYN_EV_LOG_REG       EHCA_BMASK_IBM(50, 50)
 #define MQPCB_MASK_SHARED_RQ_HNDL               EHCA_BMASK_IBM(51, 51)
 
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 99bcbd7ffb0..4b89b791be6 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -479,13 +479,13 @@ void ehca_tasklet_neq(unsigned long data)
 	struct ehca_eqe *eqe;
 	u64 ret;
 
-	eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->neq);
+	eqe = ehca_poll_eq(shca, &shca->neq);
 
 	while (eqe) {
 		if (!EHCA_BMASK_GET(NEQE_COMPLETION_EVENT, eqe->entry))
 			parse_ec(shca, eqe->entry);
 
-		eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->neq);
+		eqe = ehca_poll_eq(shca, &shca->neq);
 	}
 
 	ret = hipz_h_reset_event(shca->ipz_hca_handle,
@@ -572,8 +572,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
 	eqe_cnt = 0;
 	do {
 		u32 token;
-		eqe_cache[eqe_cnt].eqe =
-			(struct ehca_eqe *)ehca_poll_eq(shca, eq);
+		eqe_cache[eqe_cnt].eqe = ehca_poll_eq(shca, eq);
 		if (!eqe_cache[eqe_cnt].eqe)
 			break;
 		eqe_value = eqe_cache[eqe_cnt].eqe->entry;
@@ -637,7 +636,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
 		goto unlock_irq_spinlock;
 	do {
 		struct ehca_eqe *eqe;
-		eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->eq);
+		eqe = ehca_poll_eq(shca, &shca->eq);
 		if (!eqe)
 			break;
 		process_eqe(shca, eqe);
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 368311ce332..85905ab9391 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
 #include "ehca_tools.h"
 #include "hcp_if.h"
 
-#define HCAD_VERSION "0026"
+#define HCAD_VERSION "0027"
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 00c10815971..0338f1fabe8 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -461,7 +461,7 @@ static struct ehca_qp *internal_create_qp(
 					      ib_device);
 	struct ib_ucontext *context = NULL;
 	u64 h_ret;
-	int is_llqp = 0, has_srq = 0;
+	int is_llqp = 0, has_srq = 0, is_user = 0;
 	int qp_type, max_send_sge, max_recv_sge, ret;
 
 	/* h_call's out parameters */
@@ -609,9 +609,6 @@ static struct ehca_qp *internal_create_qp(
 		}
 	}
 
-	if (pd->uobject && udata)
-		context = pd->uobject->context;
-
 	my_qp = kmem_cache_zalloc(qp_cache, GFP_KERNEL);
 	if (!my_qp) {
 		ehca_err(pd->device, "pd=%p not enough memory to alloc qp", pd);
@@ -619,6 +616,11 @@ static struct ehca_qp *internal_create_qp(
 		return ERR_PTR(-ENOMEM);
 	}
 
+	if (pd->uobject && udata) {
+		is_user = 1;
+		context = pd->uobject->context;
+	}
+
 	atomic_set(&my_qp->nr_events, 0);
 	init_waitqueue_head(&my_qp->wait_completion);
 	spin_lock_init(&my_qp->spinlock_s);
@@ -707,7 +709,7 @@ static struct ehca_qp *internal_create_qp(
 			(parms.squeue.is_small || parms.rqueue.is_small);
 	}
 
-	h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms);
+	h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms, is_user);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli",
 			 h_ret);
@@ -769,18 +771,20 @@ static struct ehca_qp *internal_create_qp(
 			goto create_qp_exit2;
 		}
 
-		my_qp->sq_map.entries = my_qp->ipz_squeue.queue_length /
-			 my_qp->ipz_squeue.qe_size;
-		my_qp->sq_map.map = vmalloc(my_qp->sq_map.entries *
-					sizeof(struct ehca_qmap_entry));
-		if (!my_qp->sq_map.map) {
-			ehca_err(pd->device, "Couldn't allocate squeue "
-				 "map ret=%i", ret);
-			goto create_qp_exit3;
+		if (!is_user) {
+			my_qp->sq_map.entries = my_qp->ipz_squeue.queue_length /
+				my_qp->ipz_squeue.qe_size;
+			my_qp->sq_map.map = vmalloc(my_qp->sq_map.entries *
+						    sizeof(struct ehca_qmap_entry));
+			if (!my_qp->sq_map.map) {
+				ehca_err(pd->device, "Couldn't allocate squeue "
+					 "map ret=%i", ret);
+				goto create_qp_exit3;
+			}
+			INIT_LIST_HEAD(&my_qp->sq_err_node);
+			/* to avoid the generation of bogus flush CQEs */
+			reset_queue_map(&my_qp->sq_map);
 		}
-		INIT_LIST_HEAD(&my_qp->sq_err_node);
-		/* to avoid the generation of bogus flush CQEs */
-		reset_queue_map(&my_qp->sq_map);
 	}
 
 	if (HAS_RQ(my_qp)) {
@@ -792,20 +796,21 @@ static struct ehca_qp *internal_create_qp(
 				 "and pages ret=%i", ret);
 			goto create_qp_exit4;
 		}
-
-		my_qp->rq_map.entries = my_qp->ipz_rqueue.queue_length /
-			my_qp->ipz_rqueue.qe_size;
-		my_qp->rq_map.map = vmalloc(my_qp->rq_map.entries *
-				sizeof(struct ehca_qmap_entry));
-		if (!my_qp->rq_map.map) {
-			ehca_err(pd->device, "Couldn't allocate squeue "
-					"map ret=%i", ret);
-			goto create_qp_exit5;
+		if (!is_user) {
+			my_qp->rq_map.entries = my_qp->ipz_rqueue.queue_length /
+				my_qp->ipz_rqueue.qe_size;
+			my_qp->rq_map.map = vmalloc(my_qp->rq_map.entries *
+						    sizeof(struct ehca_qmap_entry));
+			if (!my_qp->rq_map.map) {
+				ehca_err(pd->device, "Couldn't allocate squeue "
+					 "map ret=%i", ret);
+				goto create_qp_exit5;
+			}
+			INIT_LIST_HEAD(&my_qp->rq_err_node);
+			/* to avoid the generation of bogus flush CQEs */
+			reset_queue_map(&my_qp->rq_map);
 		}
-		INIT_LIST_HEAD(&my_qp->rq_err_node);
-		/* to avoid the generation of bogus flush CQEs */
-		reset_queue_map(&my_qp->rq_map);
-	} else if (init_attr->srq) {
+	} else if (init_attr->srq && !is_user) {
 		/* this is a base QP, use the queue map of the SRQ */
 		my_qp->rq_map = my_srq->rq_map;
 		INIT_LIST_HEAD(&my_qp->rq_err_node);
@@ -918,7 +923,7 @@ create_qp_exit7:
 	kfree(my_qp->mod_qp_parm);
 
 create_qp_exit6:
-	if (HAS_RQ(my_qp))
+	if (HAS_RQ(my_qp) && !is_user)
 		vfree(my_qp->rq_map.map);
 
 create_qp_exit5:
@@ -926,7 +931,7 @@ create_qp_exit5:
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
 create_qp_exit4:
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp) && !is_user)
 		vfree(my_qp->sq_map.map);
 
 create_qp_exit3:
@@ -1244,6 +1249,7 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 	u64 update_mask;
 	u64 h_ret;
 	int bad_wqe_cnt = 0;
+	int is_user = 0;
 	int squeue_locked = 0;
 	unsigned long flags = 0;
 
@@ -1266,6 +1272,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 		ret = ehca2ib_return_code(h_ret);
 		goto modify_qp_exit1;
 	}
+	if (ibqp->uobject)
+		is_user = 1;
 
 	qp_cur_state = ehca2ib_qp_state(mqpcb->qp_state);
 
@@ -1728,7 +1736,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 			goto modify_qp_exit2;
 		}
 	}
-	if ((qp_new_state == IB_QPS_ERR) && (qp_cur_state != IB_QPS_ERR)) {
+	if ((qp_new_state == IB_QPS_ERR) && (qp_cur_state != IB_QPS_ERR)
+	    && !is_user) {
 		ret = check_for_left_cqes(my_qp, shca);
 		if (ret)
 			goto modify_qp_exit2;
@@ -1738,16 +1747,17 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 		ipz_qeit_reset(&my_qp->ipz_rqueue);
 		ipz_qeit_reset(&my_qp->ipz_squeue);
 
-		if (qp_cur_state == IB_QPS_ERR) {
+		if (qp_cur_state == IB_QPS_ERR && !is_user) {
 			del_from_err_list(my_qp->send_cq, &my_qp->sq_err_node);
 
 			if (HAS_RQ(my_qp))
 				del_from_err_list(my_qp->recv_cq,
 						  &my_qp->rq_err_node);
 		}
-		reset_queue_map(&my_qp->sq_map);
+		if (!is_user)
+			reset_queue_map(&my_qp->sq_map);
 
-		if (HAS_RQ(my_qp))
+		if (HAS_RQ(my_qp) && !is_user)
 			reset_queue_map(&my_qp->rq_map);
 	}
 
@@ -1952,19 +1962,13 @@ int ehca_query_qp(struct ib_qp *qp,
 	qp_attr->cap.max_inline_data = my_qp->sq_max_inline_data_size;
 	qp_attr->dest_qp_num = qpcb->dest_qp_nr;
 
-	qp_attr->pkey_index =
-		EHCA_BMASK_GET(MQPCB_PRIM_P_KEY_IDX, qpcb->prim_p_key_idx);
-
-	qp_attr->port_num =
-		EHCA_BMASK_GET(MQPCB_PRIM_PHYS_PORT, qpcb->prim_phys_port);
-
+	qp_attr->pkey_index = qpcb->prim_p_key_idx;
+	qp_attr->port_num = qpcb->prim_phys_port;
 	qp_attr->timeout = qpcb->timeout;
 	qp_attr->retry_cnt = qpcb->retry_count;
 	qp_attr->rnr_retry = qpcb->rnr_retry_count;
 
-	qp_attr->alt_pkey_index =
-		EHCA_BMASK_GET(MQPCB_PRIM_P_KEY_IDX, qpcb->alt_p_key_idx);
-
+	qp_attr->alt_pkey_index = qpcb->alt_p_key_idx;
 	qp_attr->alt_port_num = qpcb->alt_phys_port;
 	qp_attr->alt_timeout = qpcb->timeout_al;
 
@@ -2051,8 +2055,7 @@ int ehca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
 		update_mask |=
 			EHCA_BMASK_SET(MQPCB_MASK_CURR_SRQ_LIMIT, 1)
 			| EHCA_BMASK_SET(MQPCB_MASK_QP_AFF_ASYN_EV_LOG_REG, 1);
-		mqpcb->curr_srq_limit =
-			EHCA_BMASK_SET(MQPCB_CURR_SRQ_LIMIT, attr->srq_limit);
+		mqpcb->curr_srq_limit = attr->srq_limit;
 		mqpcb->qp_aff_asyn_ev_log_reg =
 			EHCA_BMASK_SET(QPX_AAELOG_RESET_SRQ_LIMIT, 1);
 	}
@@ -2115,8 +2118,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr)
 
 	srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1;
 	srq_attr->max_sge = 3;
-	srq_attr->srq_limit = EHCA_BMASK_GET(
-		MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit);
+	srq_attr->srq_limit = qpcb->curr_srq_limit;
 
 	if (ehca_debug_level >= 2)
 		ehca_dmp(qpcb, 4*70, "qp_num=%x", my_qp->real_qp_num);
@@ -2138,10 +2140,12 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 	int ret;
 	u64 h_ret;
 	u8 port_num;
+	int is_user = 0;
 	enum ib_qp_type	qp_type;
 	unsigned long flags;
 
 	if (uobject) {
+		is_user = 1;
 		if (my_qp->mm_count_galpa ||
 		    my_qp->mm_count_rqueue || my_qp->mm_count_squeue) {
 			ehca_err(dev, "Resources still referenced in "
@@ -2168,10 +2172,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 	 * SRQs will never get into an error list and do not have a recv_cq,
 	 * so we need to skip them here.
 	 */
-	if (HAS_RQ(my_qp) && !IS_SRQ(my_qp))
+	if (HAS_RQ(my_qp) && !IS_SRQ(my_qp) && !is_user)
 		del_from_err_list(my_qp->recv_cq, &my_qp->rq_err_node);
 
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp) && !is_user)
 		del_from_err_list(my_qp->send_cq, &my_qp->sq_err_node);
 
 	/* now wait until all pending events have completed */
@@ -2209,13 +2213,13 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 	if (HAS_RQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
-
-		vfree(my_qp->rq_map.map);
+		if (!is_user)
+			vfree(my_qp->rq_map.map);
 	}
 	if (HAS_SQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
-
-		vfree(my_qp->sq_map.map);
+		if (!is_user)
+			vfree(my_qp->sq_map.map);
 	}
 	kmem_cache_free(qp_cache, my_qp);
 	atomic_dec(&shca->num_qps);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
index d0ab0c0d5e9..4d5dc3304d4 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.c
+++ b/drivers/infiniband/hw/ehca/hcp_if.c
@@ -284,7 +284,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 	param->act_pages = (u32)outs[4];
 
 	if (ret == H_SUCCESS)
-		hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]);
+		hcp_galpas_ctor(&cq->galpas, 0, outs[5], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
 		ehca_gen_err("Not enough resources. ret=%lli", ret);
@@ -293,7 +293,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 }
 
 u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
-			     struct ehca_alloc_qp_parms *parms)
+			     struct ehca_alloc_qp_parms *parms, int is_user)
 {
 	u64 ret;
 	u64 allocate_controls, max_r10_reg, r11, r12;
@@ -359,7 +359,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
 		(u32)EHCA_BMASK_GET(H_ALL_RES_QP_RQUEUE_SIZE_PAGES, outs[4]);
 
 	if (ret == H_SUCCESS)
-		hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]);
+		hcp_galpas_ctor(&parms->galpas, is_user, outs[6], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
 		ehca_gen_err("Not enough resources. ret=%lli", ret);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 2c3c6e0ea5c..39c1c3618ec 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -78,7 +78,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
  * initialize resources, create empty QPPTs (2 rings).
  */
 u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
-			     struct ehca_alloc_qp_parms *parms);
+			     struct ehca_alloc_qp_parms *parms, int is_user);
 
 u64 hipz_h_query_port(const struct ipz_adapter_handle adapter_handle,
 		      const u8 port_id,
diff --git a/drivers/infiniband/hw/ehca/hcp_phyp.c b/drivers/infiniband/hw/ehca/hcp_phyp.c
index 214821095cb..b3e0e72e8a7 100644
--- a/drivers/infiniband/hw/ehca/hcp_phyp.c
+++ b/drivers/infiniband/hw/ehca/hcp_phyp.c
@@ -54,12 +54,15 @@ int hcall_unmap_page(u64 mapaddr)
 	return 0;
 }
 
-int hcp_galpas_ctor(struct h_galpas *galpas,
+int hcp_galpas_ctor(struct h_galpas *galpas, int is_user,
 		    u64 paddr_kernel, u64 paddr_user)
 {
-	int ret = hcall_map_page(paddr_kernel, &galpas->kernel.fw_handle);
-	if (ret)
-		return ret;
+	if (!is_user) {
+		int ret = hcall_map_page(paddr_kernel, &galpas->kernel.fw_handle);
+		if (ret)
+			return ret;
+	} else
+		galpas->kernel.fw_handle = 0;
 
 	galpas->user.fw_handle = paddr_user;
 
diff --git a/drivers/infiniband/hw/ehca/hcp_phyp.h b/drivers/infiniband/hw/ehca/hcp_phyp.h
index 5305c2a3ed9..204227d5303 100644
--- a/drivers/infiniband/hw/ehca/hcp_phyp.h
+++ b/drivers/infiniband/hw/ehca/hcp_phyp.h
@@ -78,7 +78,7 @@ static inline void hipz_galpa_store(struct h_galpa galpa, u32 offset, u64 value)
 	*(volatile u64 __force *)addr = value;
 }
 
-int hcp_galpas_ctor(struct h_galpas *galpas,
+int hcp_galpas_ctor(struct h_galpas *galpas, int is_user,
 		    u64 paddr_kernel, u64 paddr_user);
 
 int hcp_galpas_dtor(struct h_galpas *galpas);
diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c
index c3a32846543..1227c593627 100644
--- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c
+++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c
@@ -220,10 +220,13 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue,
 	queue->small_page = NULL;
 
 	/* allocate queue page pointers */
-	queue->queue_pages = vmalloc(nr_of_pages * sizeof(void *));
+	queue->queue_pages = kmalloc(nr_of_pages * sizeof(void *), GFP_KERNEL);
 	if (!queue->queue_pages) {
-		ehca_gen_err("Couldn't allocate queue page list");
-		return 0;
+		queue->queue_pages = vmalloc(nr_of_pages * sizeof(void *));
+		if (!queue->queue_pages) {
+			ehca_gen_err("Couldn't allocate queue page list");
+			return 0;
+		}
 	}
 	memset(queue->queue_pages, 0, nr_of_pages * sizeof(void *));
 
@@ -240,7 +243,10 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue,
 ipz_queue_ctor_exit0:
 	ehca_gen_err("Couldn't alloc pages queue=%p "
 		 "nr_of_pages=%x",  queue, nr_of_pages);
-	vfree(queue->queue_pages);
+	if (is_vmalloc_addr(queue->queue_pages))
+		vfree(queue->queue_pages);
+	else
+		kfree(queue->queue_pages);
 
 	return 0;
 }
@@ -262,7 +268,10 @@ int ipz_queue_dtor(struct ehca_pd *pd, struct ipz_queue *queue)
 			free_page((unsigned long)queue->queue_pages[i]);
 	}
 
-	vfree(queue->queue_pages);
+	if (is_vmalloc_addr(queue->queue_pages))
+		vfree(queue->queue_pages);
+	else
+		kfree(queue->queue_pages);
 
 	return 1;
 }
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 20724aee76f..c4a02648c8a 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1585,12 +1585,16 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				break;
 
 			case IB_WR_LOCAL_INV:
+				ctrl->srcrb_flags |=
+					cpu_to_be32(MLX4_WQE_CTRL_STRONG_ORDER);
 				set_local_inv_seg(wqe, wr->ex.invalidate_rkey);
 				wqe  += sizeof (struct mlx4_wqe_local_inval_seg);
 				size += sizeof (struct mlx4_wqe_local_inval_seg) / 16;
 				break;
 
 			case IB_WR_FAST_REG_MR:
+				ctrl->srcrb_flags |=
+					cpu_to_be32(MLX4_WQE_CTRL_STRONG_ORDER);
 				set_fmr_seg(wqe, wr);
 				wqe  += sizeof (struct mlx4_wqe_fmr_seg);
 				size += sizeof (struct mlx4_wqe_fmr_seg) / 16;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 6d55f9d748f..8c2ed994d54 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -1059,7 +1059,7 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev,
 	MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_MTT_OFFSET);
 	if (mthca_is_memfree(dev))
 		dev_lim->reserved_mtts = ALIGN((1 << (field >> 4)) * sizeof(u64),
-					       MTHCA_MTT_SEG_SIZE) / MTHCA_MTT_SEG_SIZE;
+					       dev->limits.mtt_seg_size) / dev->limits.mtt_seg_size;
 	else
 		dev_lim->reserved_mtts = 1 << (field >> 4);
 	MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_MRW_SZ_OFFSET);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 252590116df..9ef611f6dd3 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -159,6 +159,7 @@ struct mthca_limits {
 	int      reserved_eqs;
 	int      num_mpts;
 	int      num_mtt_segs;
+	int	 mtt_seg_size;
 	int      fmr_reserved_mtts;
 	int      reserved_mtts;
 	int      reserved_mrws;
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 28f0e0c40d7..90e4e450a12 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -641,9 +641,11 @@ static void mthca_free_irqs(struct mthca_dev *dev)
 	if (dev->eq_table.have_irq)
 		free_irq(dev->pdev->irq, dev);
 	for (i = 0; i < MTHCA_NUM_EQ; ++i)
-		if (dev->eq_table.eq[i].have_irq)
+		if (dev->eq_table.eq[i].have_irq) {
 			free_irq(dev->eq_table.eq[i].msi_x_vector,
 				 dev->eq_table.eq + i);
+			dev->eq_table.eq[i].have_irq = 0;
+		}
 }
 
 static int mthca_map_reg(struct mthca_dev *dev,
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 1d83cf7caf3..13da9f1d24c 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -125,6 +125,10 @@ module_param_named(fmr_reserved_mtts, hca_profile.fmr_reserved_mtts, int, 0444);
 MODULE_PARM_DESC(fmr_reserved_mtts,
 		 "number of memory translation table segments reserved for FMR");
 
+static int log_mtts_per_seg = ilog2(MTHCA_MTT_SEG_SIZE / 8);
+module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
+MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)");
+
 static char mthca_version[] __devinitdata =
 	DRV_NAME ": Mellanox InfiniBand HCA driver v"
 	DRV_VERSION " (" DRV_RELDATE ")\n";
@@ -162,6 +166,7 @@ static int mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim)
 	int err;
 	u8 status;
 
+	mdev->limits.mtt_seg_size = (1 << log_mtts_per_seg) * 8;
 	err = mthca_QUERY_DEV_LIM(mdev, dev_lim, &status);
 	if (err) {
 		mthca_err(mdev, "QUERY_DEV_LIM command failed, aborting.\n");
@@ -460,11 +465,11 @@ static int mthca_init_icm(struct mthca_dev *mdev,
 	}
 
 	/* CPU writes to non-reserved MTTs, while HCA might DMA to reserved mtts */
-	mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * MTHCA_MTT_SEG_SIZE,
-					   dma_get_cache_alignment()) / MTHCA_MTT_SEG_SIZE;
+	mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * mdev->limits.mtt_seg_size,
+					   dma_get_cache_alignment()) / mdev->limits.mtt_seg_size;
 
 	mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base,
-							 MTHCA_MTT_SEG_SIZE,
+							 mdev->limits.mtt_seg_size,
 							 mdev->limits.num_mtt_segs,
 							 mdev->limits.reserved_mtts,
 							 1, 0);
@@ -1315,6 +1320,12 @@ static void __init mthca_validate_profile(void)
 		printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n",
 		       hca_profile.fmr_reserved_mtts);
 	}
+
+	if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) {
+		printk(KERN_WARNING PFX "bad log_mtts_per_seg (%d). Using default - %d\n",
+		       log_mtts_per_seg, ilog2(MTHCA_MTT_SEG_SIZE / 8));
+		log_mtts_per_seg = ilog2(MTHCA_MTT_SEG_SIZE / 8);
+	}
 }
 
 static int __init mthca_init(void)
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 882e6b73591..d606edf1085 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -220,7 +220,7 @@ static struct mthca_mtt *__mthca_alloc_mtt(struct mthca_dev *dev, int size,
 
 	mtt->buddy = buddy;
 	mtt->order = 0;
-	for (i = MTHCA_MTT_SEG_SIZE / 8; i < size; i <<= 1)
+	for (i = dev->limits.mtt_seg_size / 8; i < size; i <<= 1)
 		++mtt->order;
 
 	mtt->first_seg = mthca_alloc_mtt_range(dev, mtt->order, buddy);
@@ -267,7 +267,7 @@ static int __mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt,
 
 	while (list_len > 0) {
 		mtt_entry[0] = cpu_to_be64(dev->mr_table.mtt_base +
-					   mtt->first_seg * MTHCA_MTT_SEG_SIZE +
+					   mtt->first_seg * dev->limits.mtt_seg_size +
 					   start_index * 8);
 		mtt_entry[1] = 0;
 		for (i = 0; i < list_len && i < MTHCA_MAILBOX_SIZE / 8 - 2; ++i)
@@ -326,7 +326,7 @@ static void mthca_tavor_write_mtt_seg(struct mthca_dev *dev,
 	u64 __iomem *mtts;
 	int i;
 
-	mtts = dev->mr_table.tavor_fmr.mtt_base + mtt->first_seg * MTHCA_MTT_SEG_SIZE +
+	mtts = dev->mr_table.tavor_fmr.mtt_base + mtt->first_seg * dev->limits.mtt_seg_size +
 		start_index * sizeof (u64);
 	for (i = 0; i < list_len; ++i)
 		mthca_write64_raw(cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT),
@@ -345,10 +345,10 @@ static void mthca_arbel_write_mtt_seg(struct mthca_dev *dev,
 	/* For Arbel, all MTTs must fit in the same page. */
 	BUG_ON(s / PAGE_SIZE != (s + list_len * sizeof(u64) - 1) / PAGE_SIZE);
 	/* Require full segments */
-	BUG_ON(s % MTHCA_MTT_SEG_SIZE);
+	BUG_ON(s % dev->limits.mtt_seg_size);
 
 	mtts = mthca_table_find(dev->mr_table.mtt_table, mtt->first_seg +
-				s / MTHCA_MTT_SEG_SIZE, &dma_handle);
+				s / dev->limits.mtt_seg_size, &dma_handle);
 
 	BUG_ON(!mtts);
 
@@ -479,7 +479,7 @@ int mthca_mr_alloc(struct mthca_dev *dev, u32 pd, int buffer_size_shift,
 	if (mr->mtt)
 		mpt_entry->mtt_seg =
 			cpu_to_be64(dev->mr_table.mtt_base +
-				    mr->mtt->first_seg * MTHCA_MTT_SEG_SIZE);
+				    mr->mtt->first_seg * dev->limits.mtt_seg_size);
 
 	if (0) {
 		mthca_dbg(dev, "Dumping MPT entry %08x:\n", mr->ibmr.lkey);
@@ -626,7 +626,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd,
 		goto err_out_table;
 	}
 
-	mtt_seg = mr->mtt->first_seg * MTHCA_MTT_SEG_SIZE;
+	mtt_seg = mr->mtt->first_seg * dev->limits.mtt_seg_size;
 
 	if (mthca_is_memfree(dev)) {
 		mr->mem.arbel.mtts = mthca_table_find(dev->mr_table.mtt_table,
@@ -908,7 +908,7 @@ int mthca_init_mr_table(struct mthca_dev *dev)
 			 dev->mr_table.mtt_base);
 
 		dev->mr_table.tavor_fmr.mtt_base =
-			ioremap(addr, mtts * MTHCA_MTT_SEG_SIZE);
+			ioremap(addr, mtts * dev->limits.mtt_seg_size);
 		if (!dev->mr_table.tavor_fmr.mtt_base) {
 			mthca_warn(dev, "MTT ioremap for FMR failed.\n");
 			err = -ENOMEM;
diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c
index d168c254061..8edb28a9a0e 100644
--- a/drivers/infiniband/hw/mthca/mthca_profile.c
+++ b/drivers/infiniband/hw/mthca/mthca_profile.c
@@ -94,7 +94,7 @@ s64 mthca_make_profile(struct mthca_dev *dev,
 	profile[MTHCA_RES_RDB].size  = MTHCA_RDB_ENTRY_SIZE;
 	profile[MTHCA_RES_MCG].size  = MTHCA_MGM_ENTRY_SIZE;
 	profile[MTHCA_RES_MPT].size  = dev_lim->mpt_entry_sz;
-	profile[MTHCA_RES_MTT].size  = MTHCA_MTT_SEG_SIZE;
+	profile[MTHCA_RES_MTT].size  = dev->limits.mtt_seg_size;
 	profile[MTHCA_RES_UAR].size  = dev_lim->uar_scratch_entry_sz;
 	profile[MTHCA_RES_UDAV].size = MTHCA_AV_SIZE;
 	profile[MTHCA_RES_UARC].size = request->uarc_size;
@@ -232,7 +232,7 @@ s64 mthca_make_profile(struct mthca_dev *dev,
 			dev->limits.num_mtt_segs = profile[i].num;
 			dev->mr_table.mtt_base   = profile[i].start;
 			init_hca->mtt_base       = profile[i].start;
-			init_hca->mtt_seg_sz     = ffs(MTHCA_MTT_SEG_SIZE) - 7;
+			init_hca->mtt_seg_sz     = ffs(dev->limits.mtt_seg_size) - 7;
 			break;
 		case MTHCA_RES_UAR:
 			dev->limits.num_uars       = profile[i].num;
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index b832a7b814a..4a84d02ece0 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -667,7 +667,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 		i = 0;
 		while (((nes_read32(nesdev->regs+NES_SOFTWARE_RESET) & 0x00000040) == 0) && i++ < 10000)
 			mdelay(1);
-		if (i >= 10000) {
+		if (i > 10000) {
 			nes_debug(NES_DBG_INIT, "Did not see full soft reset done.\n");
 			return 0;
 		}
@@ -675,7 +675,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 		i = 0;
 		while ((nes_read_indexed(nesdev, NES_IDX_INT_CPU_STATUS) != 0x80) && i++ < 10000)
 			mdelay(1);
-		if (i >= 10000) {
+		if (i > 10000) {
 			printk(KERN_ERR PFX "Internal CPU not ready, status = %02X\n",
 			       nes_read_indexed(nesdev, NES_IDX_INT_CPU_STATUS));
 			return 0;
@@ -701,7 +701,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 	i = 0;
 	while (((nes_read32(nesdev->regs+NES_SOFTWARE_RESET) & 0x00000040) == 0) && i++ < 10000)
 		mdelay(1);
-	if (i >= 10000) {
+	if (i > 10000) {
 		nes_debug(NES_DBG_INIT, "Did not see port soft reset done.\n");
 		return 0;
 	}
@@ -711,7 +711,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 	while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS0)
 			& 0x0000000f)) != 0x0000000f) && i++ < 5000)
 		mdelay(1);
-	if (i >= 5000) {
+	if (i > 5000) {
 		nes_debug(NES_DBG_INIT, "Serdes 0 not ready, status=%x\n", u32temp);
 		return 0;
 	}
@@ -722,7 +722,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 		while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS1)
 				& 0x0000000f)) != 0x0000000f) && i++ < 5000)
 			mdelay(1);
-		if (i >= 5000) {
+		if (i > 5000) {
 			nes_debug(NES_DBG_INIT, "Serdes 1 not ready, status=%x\n", u32temp);
 			return 0;
 		}
@@ -792,7 +792,7 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
 		while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS0)
 				& 0x0000000f)) != 0x0000000f) && i++ < 5000)
 			mdelay(1);
-		if (i >= 5000) {
+		if (i > 5000) {
 			nes_debug(NES_DBG_PHY, "Init: serdes 0 not ready, status=%x\n", u32temp);
 			return 1;
 		}
@@ -815,7 +815,7 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
 			while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS1)
 				& 0x0000000f)) != 0x0000000f) && (i++ < 5000))
 				mdelay(1);
-			if (i >= 5000) {
+			if (i > 5000) {
 				printk("%s: Init: serdes 1 not ready, status=%x\n", __func__, u32temp);
 				/* return 1; */
 			}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 47d588ba2a7..181b1f32325 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1394,8 +1394,8 @@ void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb,
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	int e = skb_queue_empty(&priv->cm.skb_queue);
 
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	skb_queue_tail(&priv->cm.skb_queue, skb);
 	if (e)
@@ -1455,13 +1455,15 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 	struct net_device *dev = to_net_dev(d);
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
+
 	/* flush paths if we switch modes so that connections are restarted */
 	if (IPOIB_CM_SUPPORTED(dev->dev_addr) && !strcmp(buf, "connected\n")) {
 		set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
 		ipoib_warn(priv, "enabling connected mode "
 			   "will cause multicast packet drops\n");
 
-		rtnl_lock();
 		dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
 		rtnl_unlock();
 		priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
@@ -1473,7 +1475,6 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 	if (!strcmp(buf, "datagram\n")) {
 		clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
 
-		rtnl_lock();
 		if (test_bit(IPOIB_FLAG_CSUM, &priv->flags)) {
 			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 			if (priv->hca_caps & IB_DEVICE_UD_TSO)
@@ -1485,6 +1486,7 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 
 		return count;
 	}
+	rtnl_unlock();
 
 	return -EINVAL;
 }
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index ab2c192c76b..e319d91f60a 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -561,7 +561,7 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 	struct ipoib_neigh *neigh;
 	unsigned long flags;
 
-	neigh = ipoib_neigh_alloc(skb->dst->neighbour, skb->dev);
+	neigh = ipoib_neigh_alloc(skb_dst(skb)->neighbour, skb->dev);
 	if (!neigh) {
 		++dev->stats.tx_dropped;
 		dev_kfree_skb_any(skb);
@@ -570,9 +570,9 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	path = __path_find(dev, skb->dst->neighbour->ha + 4);
+	path = __path_find(dev, skb_dst(skb)->neighbour->ha + 4);
 	if (!path) {
-		path = path_rec_create(dev, skb->dst->neighbour->ha + 4);
+		path = path_rec_create(dev, skb_dst(skb)->neighbour->ha + 4);
 		if (!path)
 			goto err_path;
 
@@ -605,7 +605,7 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 				goto err_drop;
 			}
 		} else
-			ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha));
+			ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb_dst(skb)->neighbour->ha));
 	} else {
 		neigh->ah  = NULL;
 
@@ -635,15 +635,15 @@ static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev)
 	struct ipoib_dev_priv *priv = netdev_priv(skb->dev);
 
 	/* Look up path record for unicasts */
-	if (skb->dst->neighbour->ha[4] != 0xff) {
+	if (skb_dst(skb)->neighbour->ha[4] != 0xff) {
 		neigh_add_path(skb, dev);
 		return;
 	}
 
 	/* Add in the P_Key for multicasts */
-	skb->dst->neighbour->ha[8] = (priv->pkey >> 8) & 0xff;
-	skb->dst->neighbour->ha[9] = priv->pkey & 0xff;
-	ipoib_mcast_send(dev, skb->dst->neighbour->ha + 4, skb);
+	skb_dst(skb)->neighbour->ha[8] = (priv->pkey >> 8) & 0xff;
+	skb_dst(skb)->neighbour->ha[9] = priv->pkey & 0xff;
+	ipoib_mcast_send(dev, skb_dst(skb)->neighbour->ha + 4, skb);
 }
 
 static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
@@ -708,16 +708,16 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct ipoib_neigh *neigh;
 	unsigned long flags;
 
-	if (likely(skb->dst && skb->dst->neighbour)) {
-		if (unlikely(!*to_ipoib_neigh(skb->dst->neighbour))) {
+	if (likely(skb_dst(skb) && skb_dst(skb)->neighbour)) {
+		if (unlikely(!*to_ipoib_neigh(skb_dst(skb)->neighbour))) {
 			ipoib_path_lookup(skb, dev);
 			return NETDEV_TX_OK;
 		}
 
-		neigh = *to_ipoib_neigh(skb->dst->neighbour);
+		neigh = *to_ipoib_neigh(skb_dst(skb)->neighbour);
 
 		if (unlikely((memcmp(&neigh->dgid.raw,
-				     skb->dst->neighbour->ha + 4,
+				     skb_dst(skb)->neighbour->ha + 4,
 				     sizeof(union ib_gid))) ||
 			     (neigh->dev != dev))) {
 			spin_lock_irqsave(&priv->lock, flags);
@@ -743,7 +743,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				return NETDEV_TX_OK;
 			}
 		} else if (neigh->ah) {
-			ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(skb->dst->neighbour->ha));
+			ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(skb_dst(skb)->neighbour->ha));
 			return NETDEV_TX_OK;
 		}
 
@@ -772,7 +772,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			if ((be16_to_cpup((__be16 *) skb->data) != ETH_P_ARP) &&
 			    (be16_to_cpup((__be16 *) skb->data) != ETH_P_RARP)) {
 				ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x %pI6\n",
-					   skb->dst ? "neigh" : "dst",
+					   skb_dst(skb) ? "neigh" : "dst",
 					   be16_to_cpup((__be16 *) skb->data),
 					   IPOIB_QPN(phdr->hwaddr),
 					   phdr->hwaddr + 4);
@@ -817,7 +817,7 @@ static int ipoib_hard_header(struct sk_buff *skb,
 	 * destination address onto the front of the skb so we can
 	 * figure out where to send the packet later.
 	 */
-	if ((!skb->dst || !skb->dst->neighbour) && daddr) {
+	if ((!skb_dst(skb) || !skb_dst(skb)->neighbour) && daddr) {
 		struct ipoib_pseudoheader *phdr =
 			(struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr);
 		memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN);
@@ -1053,6 +1053,7 @@ static void ipoib_setup(struct net_device *dev)
 	dev->tx_queue_len	 = ipoib_sendq_size * 2;
 	dev->features		 = (NETIF_F_VLAN_CHALLENGED	|
 				    NETIF_F_HIGHDMA);
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 
 	memcpy(dev->broadcast, ipv4_bcast_addr, INFINIBAND_ALEN);
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 425e31112ed..a0e97532e71 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -261,7 +261,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
 
 		skb->dev = dev;
 
-		if (!skb->dst || !skb->dst->neighbour) {
+		if (!skb_dst(skb) || !skb_dst(skb)->neighbour) {
 			/* put pseudoheader back on for next time */
 			skb_push(skb, sizeof (struct ipoib_pseudoheader));
 		}
@@ -707,10 +707,10 @@ void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb)
 
 out:
 	if (mcast && mcast->ah) {
-		if (skb->dst		&&
-		    skb->dst->neighbour &&
-		    !*to_ipoib_neigh(skb->dst->neighbour)) {
-			struct ipoib_neigh *neigh = ipoib_neigh_alloc(skb->dst->neighbour,
+		if (skb_dst(skb)		&&
+		    skb_dst(skb)->neighbour &&
+		    !*to_ipoib_neigh(skb_dst(skb)->neighbour)) {
+			struct ipoib_neigh *neigh = ipoib_neigh_alloc(skb_dst(skb)->neighbour,
 									skb->dev);
 
 			if (neigh) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 4c57f329dd5..e3bf00d8cd2 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -61,7 +61,8 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
 
 	ppriv = netdev_priv(pdev);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	mutex_lock(&ppriv->vlan_mutex);
 
 	/*
@@ -167,7 +168,8 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
 
 	ppriv = netdev_priv(pdev);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	mutex_lock(&ppriv->vlan_mutex);
 	list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) {
 		if (priv->pkey == pkey) {
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 75223f50de5..0ba6ec87629 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -257,11 +257,8 @@ static void iscsi_iser_cleanup_task(struct iscsi_task *task)
 {
 	struct iscsi_iser_task *iser_task = task->dd_data;
 
-	/*
-	 * mgmt tasks do not need special cleanup and we do not
-	 * allocate anything in the init task callout
-	 */
-	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+	/* mgmt tasks do not need special cleanup */
+	if (!task->sc)
 		return;
 
 	if (iser_task->status == ISER_TASK_STATUS_STARTED) {
@@ -517,7 +514,8 @@ iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *s
 }
 
 static struct iscsi_endpoint *
-iscsi_iser_ep_connect(struct sockaddr *dst_addr, int non_blocking)
+iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+		      int non_blocking)
 {
 	int err;
 	struct iser_conn *ib_conn;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5c0a631d145..06f46fcc077 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -232,7 +232,7 @@ config INPUT_GPIO_ROTARY_ENCODER
 	depends on GPIOLIB && GENERIC_GPIO
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
-	  Check file:Documentation/incput/rotary_encoder.txt for more
+	  Check file:Documentation/input/rotary-encoder.txt for more
 	  information.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index da3c3a5d268..c4b3fbd1a80 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -192,7 +192,7 @@ config SERIO_RAW
 
 config SERIO_XILINX_XPS_PS2
 	tristate "Xilinx XPS PS/2 Controller Support"
-	depends on PPC
+	depends on PPC || MICROBLAZE
 	help
 	  This driver supports XPS PS/2 IP from the Xilinx EDK on
 	  PowerPC platform.
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index a28c06d686e..89b394183a7 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
 	io->dev.parent	= &dev->dev;
 
 	kmi->io 	= io;
-	kmi->base	= ioremap(dev->res.start, KMI_SIZE);
+	kmi->base	= ioremap(dev->res.start, resource_size(&dev->res));
 	if (!kmi->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 3d113c6e4a7..02bdca6f95c 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -61,4 +61,6 @@ source "drivers/isdn/hardware/Kconfig"
 
 endif # ISDN_CAPI
 
+source "drivers/isdn/gigaset/Kconfig"
+
 endif # ISDN
diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index 29419a8d31d..16f2e465e5f 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -490,7 +490,14 @@ static void pars_2_message(_cmsg * cmsg)
 	}
 }
 
-/*-------------------------------------------------------*/
+/**
+ * capi_cmsg2message() - assemble CAPI 2.0 message from _cmsg structure
+ * @cmsg:	_cmsg structure
+ * @msg:	buffer for assembled message
+ *
+ * Return value: 0 for success
+ */
+
 unsigned capi_cmsg2message(_cmsg * cmsg, u8 * msg)
 {
 	cmsg->m = msg;
@@ -553,7 +560,14 @@ static void message_2_pars(_cmsg * cmsg)
 	}
 }
 
-/*-------------------------------------------------------*/
+/**
+ * capi_message2cmsg() - disassemble CAPI 2.0 message into _cmsg structure
+ * @cmsg:	_cmsg structure
+ * @msg:	buffer for assembled message
+ *
+ * Return value: 0 for success
+ */
+
 unsigned capi_message2cmsg(_cmsg * cmsg, u8 * msg)
 {
 	memset(cmsg, 0, sizeof(_cmsg));
@@ -573,7 +587,18 @@ unsigned capi_message2cmsg(_cmsg * cmsg, u8 * msg)
 	return 0;
 }
 
-/*-------------------------------------------------------*/
+/**
+ * capi_cmsg_header() - initialize header part of _cmsg structure
+ * @cmsg:	_cmsg structure
+ * @_ApplId:	ApplID field value
+ * @_Command:	Command field value
+ * @_Subcommand:	Subcommand field value
+ * @_Messagenumber:	Message Number field value
+ * @_Controller:	Controller/PLCI/NCCI field value
+ *
+ * Return value: 0 for success
+ */
+
 unsigned capi_cmsg_header(_cmsg * cmsg, u16 _ApplId,
 			  u8 _Command, u8 _Subcommand,
 			  u16 _Messagenumber, u32 _Controller)
@@ -641,6 +666,14 @@ static char *mnames[] =
 	[0x4e] = "MANUFACTURER_RESP"
 };
 
+/**
+ * capi_cmd2str() - convert CAPI 2.0 command/subcommand number to name
+ * @cmd:	command number
+ * @subcmd:	subcommand number
+ *
+ * Return value: static string, NULL if command/subcommand unknown
+ */
+
 char *capi_cmd2str(u8 cmd, u8 subcmd)
 {
 	return mnames[command_2_index(cmd, subcmd)];
@@ -879,6 +912,11 @@ init:
 	return cdb;
 }
 
+/**
+ * cdebbuf_free() - free CAPI debug buffer
+ * @cdb:	buffer to free
+ */
+
 void cdebbuf_free(_cdebbuf *cdb)
 {
 	if (likely(cdb == g_debbuf)) {
@@ -891,6 +929,16 @@ void cdebbuf_free(_cdebbuf *cdb)
 }
 
 
+/**
+ * capi_message2str() - format CAPI 2.0 message for printing
+ * @msg:	CAPI 2.0 message
+ *
+ * Allocates a CAPI debug buffer and fills it with a printable representation
+ * of the CAPI 2.0 message in @msg.
+ * Return value: allocated debug buffer, NULL on error
+ * The returned buffer should be freed by a call to cdebbuf_free() after use.
+ */
+
 _cdebbuf *capi_message2str(u8 * msg)
 {
 	_cdebbuf *cdb;
@@ -926,10 +974,23 @@ _cdebbuf *capi_message2str(u8 * msg)
 	return cdb;
 }
 
+/**
+ * capi_cmsg2str() - format _cmsg structure for printing
+ * @cmsg:	_cmsg structure
+ *
+ * Allocates a CAPI debug buffer and fills it with a printable representation
+ * of the CAPI 2.0 message stored in @cmsg by a previous call to
+ * capi_cmsg2message() or capi_message2cmsg().
+ * Return value: allocated debug buffer, NULL on error
+ * The returned buffer should be freed by a call to cdebbuf_free() after use.
+ */
+
 _cdebbuf *capi_cmsg2str(_cmsg * cmsg)
 {
 	_cdebbuf *cdb;
 
+	if (!cmsg->m)
+		return NULL;	/* no message */
 	cdb = cdebbuf_alloc();
 	if (!cdb)
 		return NULL;
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index f33170368cd..57d26360f64 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -377,14 +377,14 @@ void capi_ctr_ready(struct capi_ctr * card)
 EXPORT_SYMBOL(capi_ctr_ready);
 
 /**
- * capi_ctr_reseted() - signal CAPI controller reset
+ * capi_ctr_down() - signal CAPI controller not ready
  * @card:	controller descriptor structure.
  *
  * Called by hardware driver to signal that the controller is down and
  * unavailable for use.
  */
 
-void capi_ctr_reseted(struct capi_ctr * card)
+void capi_ctr_down(struct capi_ctr * card)
 {
 	u16 appl;
 
@@ -413,7 +413,7 @@ void capi_ctr_reseted(struct capi_ctr * card)
 	notify_push(KCI_CONTRDOWN, card->cnr, 0, 0);
 }
 
-EXPORT_SYMBOL(capi_ctr_reseted);
+EXPORT_SYMBOL(capi_ctr_down);
 
 /**
  * capi_ctr_suspend_output() - suspend controller
@@ -517,7 +517,7 @@ EXPORT_SYMBOL(attach_capi_ctr);
 int detach_capi_ctr(struct capi_ctr *card)
 {
         if (card->cardstate != CARD_DETECTED)
-		capi_ctr_reseted(card);
+		capi_ctr_down(card);
 
 	ncards--;
 
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index 7d97d54588d..77e9fdda059 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -183,7 +183,7 @@ int cf_command(int drvid, int mode,
           (mode != 1) ? "" : " 0 ",
           (mode != 1) ? "" : fwd_nr);
  
-  retval = divert_if.ll_cmd(&cs->ics); /* excute command */
+  retval = divert_if.ll_cmd(&cs->ics); /* execute command */
 
   if (!retval)
    { cs->prev = NULL;
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index 9ca889adf12..18ab8652aa5 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ISDN_DRV_GIGASET
 	tristate "Siemens Gigaset support"
+	depends on ISDN_I4L
 	select CRC_CCITT
 	select BITREVERSE
 	help
@@ -42,11 +43,4 @@ config GIGASET_DEBUG
 	  This enables debugging code in the Gigaset drivers.
 	  If in doubt, say yes.
 
-config GIGASET_UNDOCREQ
-	bool "Support for undocumented USB requests"
-	help
-	  This enables support for USB requests we only know from
-	  reverse engineering (currently M105 only). If you need
-	  features like configuration mode of M105, say yes.
-
 endif # ISDN_DRV_GIGASET
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index 2a4ce96f04b..234cc5d5331 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -174,9 +174,8 @@ byte_stuff:
 
 				if (unlikely(fcs != PPP_GOODFCS)) {
 					dev_err(cs->dev,
-					    "Packet checksum at %lu failed, "
-					    "packet is corrupted (%u bytes)!\n",
-					    bcs->rcvbytes, skb->len);
+				"Checksum failed, %u bytes corrupted!\n",
+						skb->len);
 					compskb = NULL;
 					gigaset_rcv_error(compskb, cs, bcs);
 					error = 1;
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 0048ce98bfa..e4141bf8b2f 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -565,8 +565,6 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
 	gig_dbg(DEBUG_INIT, "setting up bcs[%d]->at_state", channel);
 	gigaset_at_init(&bcs->at_state, bcs, cs, -1);
 
-	bcs->rcvbytes = 0;
-
 #ifdef CONFIG_GIGASET_DEBUG
 	bcs->emptycount = 0;
 #endif
@@ -672,14 +670,8 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
 	cs->tty = NULL;
 	cs->tty_dev = NULL;
 	cs->cidmode = cidmode != 0;
-
-	//if(onechannel) { //FIXME
-		cs->tabnocid = gigaset_tab_nocid_m10x;
-		cs->tabcid = gigaset_tab_cid_m10x;
-	//} else {
-	//	cs->tabnocid = gigaset_tab_nocid;
-	//	cs->tabcid = gigaset_tab_cid;
-	//}
+	cs->tabnocid = gigaset_tab_nocid;
+	cs->tabcid = gigaset_tab_cid;
 
 	init_waitqueue_head(&cs->waitqueue);
 	cs->waiting = 0;
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index e582a4887bc..ec5169604a6 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -160,7 +160,7 @@
 
 
 // 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring
-struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */
+struct reply_t gigaset_tab_nocid[] =
 {
 	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
 
@@ -280,7 +280,7 @@ struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */
 };
 
 // 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring, 400: hup, 750: accepted icall
-struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */
+struct reply_t gigaset_tab_cid[] =
 {
 	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
 
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 747178f03d2..a2f6125739e 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -282,8 +282,8 @@ struct reply_t {
 	char	*command;	/* NULL==none */
 };
 
-extern struct reply_t gigaset_tab_cid_m10x[];
-extern struct reply_t gigaset_tab_nocid_m10x[];
+extern struct reply_t gigaset_tab_cid[];
+extern struct reply_t gigaset_tab_nocid[];
 
 struct inbuf_t {
 	unsigned char		*rcvbuf;	/* usb-gigaset receive buffer */
@@ -384,7 +384,6 @@ struct bc_state {
 	int trans_up;			/* Counter of packages (upstream) */
 
 	struct at_state_t at_state;
-	unsigned long rcvbytes;
 
 	__u16 fcs;
 	struct sk_buff *skb;
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 69a702f0db9..9b22f9cf2f3 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -544,11 +544,11 @@ int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)
 
 	gig_dbg(DEBUG_ANY, "Register driver capabilities to LL");
 
-	//iif->id[sizeof(iif->id) - 1]=0;
-	//strncpy(iif->id, isdnid, sizeof(iif->id) - 1);
 	if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index)
-	    >= sizeof iif->id)
-		return -ENOMEM; //FIXME EINVAL/...??
+	    >= sizeof iif->id) {
+		pr_err("ID too long: %s\n", isdnid);
+		return 0;
+	}
 
 	iif->owner = THIS_MODULE;
 	iif->channels = cs->channels;
@@ -568,8 +568,10 @@ int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)
 	iif->rcvcallb_skb = NULL;		/* Will be set by LL */
 	iif->statcallb = NULL;			/* Will be set by LL */
 
-	if (!register_isdn(iif))
+	if (!register_isdn(iif)) {
+		pr_err("register_isdn failed\n");
 		return 0;
+	}
 
 	cs->myid = iif->channels;		/* Set my device id */
 	return 1;
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 820a30923fe..1ebfcab7466 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -599,8 +599,7 @@ void gigaset_if_init(struct cardstate *cs)
 	if (!IS_ERR(cs->tty_dev))
 		dev_set_drvdata(cs->tty_dev, cs);
 	else {
-		dev_warn(cs->dev,
-			 "could not register device to the tty subsystem\n");
+		pr_warning("could not register device to the tty subsystem\n");
 		cs->tty_dev = NULL;
 	}
 	mutex_unlock(&cs->mutex);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 29808c4fb1c..db3a1e4cd48 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -246,6 +246,10 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 	unsigned char c;
 	static char dbgline[3 * 32 + 1];
 	int i = 0;
+
+	if (!(gigaset_debuglevel & level))
+		return;
+
 	while (count-- > 0) {
 		if (i > sizeof(dbgline) - 4) {
 			dbgline[i] = '\0';
diff --git a/drivers/isdn/gigaset/proc.c b/drivers/isdn/gigaset/proc.c
index da6f3acf9fd..9715aad9c3f 100644
--- a/drivers/isdn/gigaset/proc.c
+++ b/drivers/isdn/gigaset/proc.c
@@ -79,5 +79,5 @@ void gigaset_init_dev_sysfs(struct cardstate *cs)
 
 	gig_dbg(DEBUG_INIT, "setting up sysfs");
 	if (device_create_file(cs->tty_dev, &dev_attr_cidmode))
-		dev_err(cs->dev, "could not create sysfs attribute\n");
+		pr_err("could not create sysfs attribute\n");
 }
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index d7838516609..4deb1ab0dbf 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -153,8 +153,6 @@ static inline unsigned tiocm_to_gigaset(unsigned state)
 	return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
 }
 
-#ifdef CONFIG_GIGASET_UNDOCREQ
-/* WARNING: EXPERIMENTAL! */
 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 				  unsigned new_state)
 {
@@ -176,6 +174,11 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 	return 0;
 }
 
+/*
+ * Set M105 configuration value
+ * using undocumented device commands reverse engineered from USB traces
+ * of the Siemens Windows driver
+ */
 static int set_value(struct cardstate *cs, u8 req, u16 val)
 {
 	struct usb_device *udev = cs->hw.usb->udev;
@@ -205,8 +208,10 @@ static int set_value(struct cardstate *cs, u8 req, u16 val)
 	return r < 0 ? r : (r2 < 0 ? r2 : 0);
 }
 
-/* WARNING: HIGHLY EXPERIMENTAL! */
-// don't use this in an interrupt/BH
+/*
+ * set the baud rate on the internal serial adapter
+ * using the undocumented parameter setting command
+ */
 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
 {
 	u16 val;
@@ -237,8 +242,10 @@ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
 	return set_value(cs, 1, val);
 }
 
-/* WARNING: HIGHLY EXPERIMENTAL! */
-// don't use this in an interrupt/BH
+/*
+ * set the line format on the internal serial adapter
+ * using the undocumented parameter setting command
+ */
 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 {
 	u16 val = 0;
@@ -274,24 +281,6 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 	return set_value(cs, 3, val);
 }
 
-#else
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
-				  unsigned new_state)
-{
-	return -ENOTTY;
-}
-
-static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
-{
-	return -ENOTTY;
-}
-
-static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
-{
-	return -ENOTTY;
-}
-#endif
-
 
  /*================================================================================================================*/
 static int gigaset_init_bchannel(struct bc_state *bcs)
@@ -362,10 +351,8 @@ static void gigaset_modem_fill(unsigned long data)
 	} while (again);
 }
 
-/**
- *	gigaset_read_int_callback
- *
- *	It is called if the data was received from the device.
+/*
+ * Interrupt Input URB completion routine
  */
 static void gigaset_read_int_callback(struct urb *urb)
 {
@@ -567,18 +554,19 @@ static int gigaset_chars_in_buffer(struct cardstate *cs)
 	return cs->cmdbytes;
 }
 
+/*
+ * set the break characters on the internal serial adapter
+ * using undocumented device commands reverse engineered from USB traces
+ * of the Siemens Windows driver
+ */
 static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
 {
-#ifdef CONFIG_GIGASET_UNDOCREQ
 	struct usb_device *udev = cs->hw.usb->udev;
 
 	gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
 	memcpy(cs->hw.usb->bchars, buf, 6);
 	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
 			       0, 0, &buf, 6, 2000);
-#else
-	return -ENOTTY;
-#endif
 }
 
 static int gigaset_freebcshw(struct bc_state *bcs)
@@ -625,7 +613,6 @@ static int gigaset_initcshw(struct cardstate *cs)
 	ucs->bchars[5] = 0x13;
 	ucs->bulk_out_buffer = NULL;
 	ucs->bulk_out_urb = NULL;
-	//ucs->urb_cmd_out = NULL;
 	ucs->read_urb = NULL;
 	tasklet_init(&cs->write_tasklet,
 		     &gigaset_modem_fill, (unsigned long) cs);
@@ -742,7 +729,7 @@ static int gigaset_probe(struct usb_interface *interface,
 	cs->dev = &interface->dev;
 
 	/* save address of controller structure */
-	usb_set_intfdata(interface, cs); // dev_set_drvdata(&interface->dev, cs);
+	usb_set_intfdata(interface, cs);
 
 	endpoint = &hostif->endpoint[0].desc;
 
@@ -921,8 +908,7 @@ static const struct gigaset_ops ops = {
 	gigaset_m10x_input,
 };
 
-/**
- *	usb_gigaset_init
+/*
  * This function is called while kernel-module is loaded
  */
 static int __init usb_gigaset_init(void)
@@ -952,9 +938,7 @@ error:
 	return -1;
 }
 
-
-/**
- *	usb_gigaset_exit
+/*
  * This function is called while unloading the kernel-module
  */
 static void __exit usb_gigaset_exit(void)
diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c
index abf05ec3176..a7c0083e78a 100644
--- a/drivers/isdn/hardware/avm/b1.c
+++ b/drivers/isdn/hardware/avm/b1.c
@@ -330,7 +330,7 @@ void b1_reset_ctr(struct capi_ctr *ctrl)
 	spin_lock_irqsave(&card->lock, flags);
 	capilib_release(&cinfo->ncci_head);
 	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 void b1_register_appl(struct capi_ctr *ctrl,
diff --git a/drivers/isdn/hardware/avm/b1dma.c b/drivers/isdn/hardware/avm/b1dma.c
index da34b98e3de..0e84aaae43f 100644
--- a/drivers/isdn/hardware/avm/b1dma.c
+++ b/drivers/isdn/hardware/avm/b1dma.c
@@ -759,7 +759,7 @@ void b1dma_reset_ctr(struct capi_ctr *ctrl)
 	memset(cinfo->version, 0, sizeof(cinfo->version));
 	capilib_release(&cinfo->ncci_head);
 	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 /* ------------------------------------------------------------- */
diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c
index 9df1d3f66c8..6833301a45f 100644
--- a/drivers/isdn/hardware/avm/c4.c
+++ b/drivers/isdn/hardware/avm/c4.c
@@ -681,7 +681,7 @@ static irqreturn_t c4_handle_interrupt(avmcard *card)
 			spin_lock_irqsave(&card->lock, flags);
 			capilib_release(&cinfo->ncci_head);
 			spin_unlock_irqrestore(&card->lock, flags);
-			capi_ctr_reseted(&cinfo->capi_ctrl);
+			capi_ctr_down(&cinfo->capi_ctrl);
 		}
 		card->nlogcontr = 0;
 		return IRQ_HANDLED;
@@ -909,7 +909,7 @@ static void c4_reset_ctr(struct capi_ctr *ctrl)
         for (i=0; i < card->nr_controllers; i++) {
 		cinfo = &card->ctrlinfo[i];
 		memset(cinfo->version, 0, sizeof(cinfo->version));
-		capi_ctr_reseted(&cinfo->capi_ctrl);
+		capi_ctr_down(&cinfo->capi_ctrl);
 	}
 	card->nlogcontr = 0;
 }
diff --git a/drivers/isdn/hardware/avm/t1isa.c b/drivers/isdn/hardware/avm/t1isa.c
index e7724493738..1c53fd49adb 100644
--- a/drivers/isdn/hardware/avm/t1isa.c
+++ b/drivers/isdn/hardware/avm/t1isa.c
@@ -339,7 +339,7 @@ static void t1isa_reset_ctr(struct capi_ctr *ctrl)
 	spin_lock_irqsave(&card->lock, flags);
 	capilib_release(&cinfo->ncci_head);
 	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 static void t1isa_remove(struct pci_dev *pdev)
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index fd112ae252c..3024566dd09 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -13,7 +13,7 @@ config MISDN_HFCPCI
 
 config MISDN_HFCMULTI
 	tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
-	depends on PCI
+	depends on PCI || 8xx
 	depends on MISDN
 	help
 	  Enable support for cards with Cologne Chip AG's HFC multiport
@@ -23,6 +23,15 @@ config MISDN_HFCMULTI
 	   * HFC-8S (8 S/T interfaces on one chip)
 	   * HFC-E1 (E1 interface for 2Mbit ISDN)
 
+config MISDN_HFCMULTI_8xx
+	boolean "Support for XHFC embedded board in HFC multiport driver"
+	depends on MISDN
+	depends on MISDN_HFCMULTI
+	depends on 8xx
+	default 8xx
+	help
+	  Enable support for the XHFC embedded solution from Speech Design.
+
 config MISDN_HFCUSB
 	tristate "Support for HFC-S USB based TAs"
 	depends on USB
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
index 663b77f578b..0c773866efc 100644
--- a/drivers/isdn/hardware/mISDN/hfc_multi.h
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -17,6 +17,16 @@
 #define	PCI_ENA_REGIO	0x01
 #define	PCI_ENA_MEMIO	0x02
 
+#define XHFC_IRQ	4		/* SIU_IRQ2 */
+#define XHFC_MEMBASE	0xFE000000
+#define XHFC_MEMSIZE    0x00001000
+#define XHFC_OFFSET	0x00001000
+#define PA_XHFC_A0	0x0020		/* PA10 */
+#define PB_XHFC_IRQ1	0x00000100	/* PB23 */
+#define PB_XHFC_IRQ2	0x00000200	/* PB22 */
+#define PB_XHFC_IRQ3	0x00000400	/* PB21 */
+#define PB_XHFC_IRQ4	0x00000800	/* PB20 */
+
 /*
  * NOTE: some registers are assigned multiple times due to different modes
  *       also registers are assigned differen for HFC-4s/8s and HFC-E1
@@ -44,6 +54,7 @@ struct hfc_chan {
 	int		conf;	/* conference setting of TX slot */
 	int		txpending;	/* if there is currently data in */
 					/* the FIFO 0=no, 1=yes, 2=splloop */
+	int		Zfill;	/* rx-fifo level on last hfcmulti_tx */
 	int		rx_off; /* set to turn fifo receive off */
 	int		coeff_count; /* curren coeff block */
 	s32		*coeff; /* memory pointer to 8 coeff blocks */
@@ -62,6 +73,7 @@ struct hfcm_hw {
 	u_char	r_sci_msk;
 	u_char	r_tx0, r_tx1;
 	u_char	a_st_ctrl0[8];
+	u_char	r_bert_wd_md;
 	timer_t	timer;
 };
 
@@ -79,6 +91,11 @@ struct hfcm_hw {
 #define	HFC_CFG_CRC4		10 /* disable CRC-4 Multiframe mode, */
 					/* use double frame instead. */
 
+#define HFC_TYPE_E1		1 /* controller is HFC-E1 */
+#define HFC_TYPE_4S		4 /* controller is HFC-4S */
+#define HFC_TYPE_8S		8 /* controller is HFC-8S */
+#define HFC_TYPE_XHFC		5 /* controller is XHFC */
+
 #define	HFC_CHIP_EXRAM_128	0 /* external ram 128k */
 #define	HFC_CHIP_EXRAM_512	1 /* external ram 256k */
 #define	HFC_CHIP_REVISION0	2 /* old fifo handling */
@@ -86,19 +103,22 @@ struct hfcm_hw {
 #define	HFC_CHIP_PCM_MASTER	4 /* PCM is master */
 #define	HFC_CHIP_RX_SYNC	5 /* disable pll sync for pcm */
 #define	HFC_CHIP_DTMF		6 /* DTMF decoding is enabled */
-#define	HFC_CHIP_ULAW		7 /* ULAW mode */
-#define	HFC_CHIP_CLOCK2		8 /* double clock mode */
-#define	HFC_CHIP_E1CLOCK_GET	9 /* always get clock from E1 interface */
-#define	HFC_CHIP_E1CLOCK_PUT	10 /* always put clock from E1 interface */
-#define	HFC_CHIP_WATCHDOG	11 /* whether we should send signals */
+#define	HFC_CHIP_CONF		7 /* conference handling is enabled */
+#define	HFC_CHIP_ULAW		8 /* ULAW mode */
+#define	HFC_CHIP_CLOCK2		9 /* double clock mode */
+#define	HFC_CHIP_E1CLOCK_GET	10 /* always get clock from E1 interface */
+#define	HFC_CHIP_E1CLOCK_PUT	11 /* always put clock from E1 interface */
+#define	HFC_CHIP_WATCHDOG	12 /* whether we should send signals */
 					/* to the watchdog */
-#define	HFC_CHIP_B410P		12 /* whether we have a b410p with echocan in */
+#define	HFC_CHIP_B410P		13 /* whether we have a b410p with echocan in */
 					/* hw */
-#define	HFC_CHIP_PLXSD		13 /* whether we have a Speech-Design PLX */
+#define	HFC_CHIP_PLXSD		14 /* whether we have a Speech-Design PLX */
+#define	HFC_CHIP_EMBSD          15 /* whether we have a SD Embedded board */
 
 #define HFC_IO_MODE_PCIMEM	0x00 /* normal memory mapped IO */
 #define HFC_IO_MODE_REGIO	0x01 /* PCI io access */
 #define HFC_IO_MODE_PLXSD	0x02 /* access HFC via PLX9030 */
+#define HFC_IO_MODE_EMBSD	0x03 /* direct access */
 
 /* table entry in the PCI devices list */
 struct hm_map {
@@ -111,6 +131,7 @@ struct hm_map {
 	int opticalsupport;
 	int dip_type;
 	int io_mode;
+	int irq;
 };
 
 struct hfc_multi {
@@ -118,7 +139,7 @@ struct hfc_multi {
 	struct hm_map	*mtyp;
 	int		id;
 	int		pcm;	/* id of pcm bus */
-	int		type;
+	int		ctype;	/* controller type */
 	int		ports;
 
 	u_int		irq;	/* irq used by card */
@@ -158,10 +179,16 @@ struct hfc_multi {
 				int len);
 	void		(*write_fifo)(struct hfc_multi *hc, u_char *data,
 				int len);
-	u_long		pci_origmembase, plx_origmembase, dsp_origmembase;
+	u_long		pci_origmembase, plx_origmembase;
 	void __iomem	*pci_membase; /* PCI memory */
 	void __iomem	*plx_membase; /* PLX memory */
-	u_char		*dsp_membase; /* DSP on PLX */
+	u_long		xhfc_origmembase;
+	u_char		*xhfc_membase;
+	u_long		*xhfc_memaddr, *xhfc_memdata;
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+	struct immap	*immap;
+#endif
+	u_long		pb_irqmsk;	/* Portbit mask to check the IRQ line */
 	u_long		pci_iobase; /* PCI IO */
 	struct hfcm_hw	hw;	/* remember data of write-only-registers */
 
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h
new file mode 100644
index 00000000000..45ddced956d
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h
@@ -0,0 +1,167 @@
+/*
+ * For License see notice in hfc_multi.c
+ *
+ * special IO and init functions for the embedded XHFC board
+ * from Speech Design
+ *
+ */
+
+#include <asm/8xx_immap.h>
+
+/* Change this to the value used by your board */
+#ifndef IMAP_ADDR
+#define IMAP_ADDR	0xFFF00000
+#endif
+
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+#else
+HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(reg, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	writeb(val, hc->xhfc_memdata);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_embsd(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(reg, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	return readb(hc->xhfc_memdata);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_embsd(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(reg, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	return readb(hc->xhfc_memdata);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_embsd(struct hfc_multi *hc)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(R_STATUS, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	while (readb(hc->xhfc_memdata) & V_BUSY)
+		cpu_relax();
+}
+
+/* write fifo data (EMBSD) */
+void
+write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	*hc->xhfc_memaddr = A_FIFO_DATA0;
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	while (len) {
+		*hc->xhfc_memdata = *data;
+		data++;
+		len--;
+	}
+}
+
+/* read fifo data (EMBSD) */
+void
+read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	*hc->xhfc_memaddr = A_FIFO_DATA0;
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	while (len) {
+		*data = (u_char)(*hc->xhfc_memdata);
+		data++;
+		len--;
+	}
+}
+
+static int
+setup_embedded(struct hfc_multi *hc, struct hm_map *m)
+{
+	printk(KERN_INFO
+	    "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
+	    m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
+
+	hc->pci_dev = NULL;
+	if (m->clock2)
+		test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
+
+	hc->leds = m->leds;
+	hc->ledstate = 0xAFFEAFFE;
+	hc->opticalsupport = m->opticalsupport;
+
+	hc->pci_iobase = 0;
+	hc->pci_membase = 0;
+	hc->xhfc_membase = NULL;
+	hc->xhfc_memaddr = NULL;
+	hc->xhfc_memdata = NULL;
+
+	/* set memory access methods */
+	if (m->io_mode) /* use mode from card config */
+		hc->io_mode = m->io_mode;
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_EMBSD:
+		test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip);
+		hc->slots = 128; /* required */
+		/* fall through */
+		hc->HFC_outb = HFC_outb_embsd;
+		hc->HFC_inb = HFC_inb_embsd;
+		hc->HFC_inw = HFC_inw_embsd;
+		hc->HFC_wait = HFC_wait_embsd;
+		hc->read_fifo = read_fifo_embsd;
+		hc->write_fifo = write_fifo_embsd;
+		hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id;
+		hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase,
+				XHFC_MEMSIZE);
+		if (!hc->xhfc_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap xhfc address space. "
+			    "(internal error)\n");
+			return -EIO;
+		}
+		hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4);
+		hc->xhfc_memdata = (u_long *)(hc->xhfc_membase);
+		printk(KERN_INFO
+		    "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx "
+		    "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n",
+		    (u_long)hc->xhfc_membase, hc->xhfc_origmembase,
+		    (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata);
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		return -EIO;
+	}
+
+	/* Prepare the MPC8XX PortA 10 as output (address/data selector) */
+	hc->immap = (struct immap *)(IMAP_ADDR);
+	hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0);
+	hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0);
+	hc->immap->im_ioport.iop_padir |=   PA_XHFC_A0;
+
+	/* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */
+	hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id);
+	hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk);
+	hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk);
+	hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk);
+
+	/* At this point the needed config is done */
+	/* fifos are still not enabled */
+	return 0;
+}
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 0b28141e43b..e1dab30aed3 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -104,7 +104,7 @@
  *	If unsure, don't give this parameter.
  *
  * dslot:
- *	NOTE: only one poll value must be given for every card.
+ *	NOTE: only one dslot value must be given for every card.
  *	Also this value must be given for non-E1 cards. If omitted, the E1
  *	card has D-channel on time slot 16, which is default.
  *	If 1..15 or 17..31, an alternate time slot is used for D-channel.
@@ -139,6 +139,10 @@
  *	Selects interface with clock source for mISDN and applications.
  *	Set to card number starting with 1. Set to -1 to disable.
  *	By default, the first card is used as clock source.
+ *
+ * hwid:
+ *	NOTE: only one hwid value must be given once
+ * 	Enable special embedded devices with XHFC controllers.
  */
 
 /*
@@ -206,6 +210,11 @@ static int	clock;
 static uint	timer;
 static uint	clockdelay_te = CLKDEL_TE;
 static uint	clockdelay_nt = CLKDEL_NT;
+#define HWID_NONE	0
+#define HWID_MINIP4	1
+#define HWID_MINIP8	2
+#define HWID_MINIP16	3
+static uint	hwid = HWID_NONE;
 
 static int	HFC_cnt, Port_cnt, PCM_cnt = 99;
 
@@ -223,6 +232,7 @@ module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR);
 module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR);
 module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
 module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */
 
 #ifdef HFC_REGISTER_DEBUG
 #define HFC_outb(hc, reg, val) \
@@ -252,6 +262,10 @@ module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
 #define HFC_wait_nodebug(hc)		(hc->HFC_wait_nodebug(hc))
 #endif
 
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+#include "hfc_multi_8xx.h"
+#endif
+
 /* HFC_IO_MODE_PCIMEM */
 static void
 #ifdef HFC_REGISTER_DEBUG
@@ -261,7 +275,7 @@ HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
 HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
 #endif
 {
-	writeb(val, (hc->pci_membase)+reg);
+	writeb(val, hc->pci_membase + reg);
 }
 static u_char
 #ifdef HFC_REGISTER_DEBUG
@@ -270,7 +284,7 @@ HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	return readb((hc->pci_membase)+reg);
+	return readb(hc->pci_membase + reg);
 }
 static u_short
 #ifdef HFC_REGISTER_DEBUG
@@ -279,7 +293,7 @@ HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	return readw((hc->pci_membase)+reg);
+	return readw(hc->pci_membase + reg);
 }
 static void
 #ifdef HFC_REGISTER_DEBUG
@@ -288,7 +302,8 @@ HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
 HFC_wait_pcimem(struct hfc_multi *hc)
 #endif
 {
-	while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+	while (readb(hc->pci_membase + R_STATUS) & V_BUSY)
+		cpu_relax();
 }
 
 /* HFC_IO_MODE_REGIO */
@@ -300,7 +315,7 @@ HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
 HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
 #endif
 {
-	outb(reg, (hc->pci_iobase)+4);
+	outb(reg, hc->pci_iobase + 4);
 	outb(val, hc->pci_iobase);
 }
 static u_char
@@ -310,7 +325,7 @@ HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inb_regio(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	outb(reg, (hc->pci_iobase)+4);
+	outb(reg, hc->pci_iobase + 4);
 	return inb(hc->pci_iobase);
 }
 static u_short
@@ -320,7 +335,7 @@ HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inw_regio(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	outb(reg, (hc->pci_iobase)+4);
+	outb(reg, hc->pci_iobase + 4);
 	return inw(hc->pci_iobase);
 }
 static void
@@ -330,8 +345,9 @@ HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
 HFC_wait_regio(struct hfc_multi *hc)
 #endif
 {
-	outb(R_STATUS, (hc->pci_iobase)+4);
-	while (inb(hc->pci_iobase) & V_BUSY);
+	outb(R_STATUS, hc->pci_iobase + 4);
+	while (inb(hc->pci_iobase) & V_BUSY)
+		cpu_relax();
 }
 
 #ifdef HFC_REGISTER_DEBUG
@@ -350,14 +366,14 @@ HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
 	if (regname[0] == '\0')
 		strcpy(regname, "register");
 
-	bits[7] = '0'+(!!(val&1));
-	bits[6] = '0'+(!!(val&2));
-	bits[5] = '0'+(!!(val&4));
-	bits[4] = '0'+(!!(val&8));
-	bits[3] = '0'+(!!(val&16));
-	bits[2] = '0'+(!!(val&32));
-	bits[1] = '0'+(!!(val&64));
-	bits[0] = '0'+(!!(val&128));
+	bits[7] = '0' + (!!(val & 1));
+	bits[6] = '0' + (!!(val & 2));
+	bits[5] = '0' + (!!(val & 4));
+	bits[4] = '0' + (!!(val & 8));
+	bits[3] = '0' + (!!(val & 16));
+	bits[2] = '0' + (!!(val & 32));
+	bits[1] = '0' + (!!(val & 64));
+	bits[0] = '0' + (!!(val & 128));
 	printk(KERN_DEBUG
 	    "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
 	    hc->id, reg, regname, val, bits, function, line);
@@ -380,14 +396,14 @@ HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
 	if (regname[0] == '\0')
 		strcpy(regname, "register");
 
-	bits[7] = '0'+(!!(val&1));
-	bits[6] = '0'+(!!(val&2));
-	bits[5] = '0'+(!!(val&4));
-	bits[4] = '0'+(!!(val&8));
-	bits[3] = '0'+(!!(val&16));
-	bits[2] = '0'+(!!(val&32));
-	bits[1] = '0'+(!!(val&64));
-	bits[0] = '0'+(!!(val&128));
+	bits[7] = '0' + (!!(val & 1));
+	bits[6] = '0' + (!!(val & 2));
+	bits[5] = '0' + (!!(val & 4));
+	bits[4] = '0' + (!!(val & 8));
+	bits[3] = '0' + (!!(val & 16));
+	bits[2] = '0' + (!!(val & 32));
+	bits[1] = '0' + (!!(val & 64));
+	bits[0] = '0' + (!!(val & 128));
 	printk(KERN_DEBUG
 	    "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
 	    hc->id, reg, regname, val, bits, function, line);
@@ -467,6 +483,7 @@ write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 		len--;
 	}
 }
+
 /* read fifo data (REGIO) */
 static void
 read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
@@ -512,7 +529,6 @@ read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 	}
 }
 
-
 static void
 enable_hwirq(struct hfc_multi *hc)
 {
@@ -928,7 +944,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 			writel(pv, plx_acc_32);
 			if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
 				pcmmaster = hc;
-				if (hc->type == 1) {
+				if (hc->ctype == HFC_TYPE_E1) {
 					if (debug & DEBUG_HFCMULTI_PLXSD)
 						printk(KERN_DEBUG
 							"Schedule SYNC_I\n");
@@ -949,7 +965,8 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 		pv |= PLX_SYNC_O_EN;
 		writel(pv, plx_acc_32);
 		/* switch to jatt PLL, if not disabled by RX_SYNC */
-		if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+		if (hc->ctype == HFC_TYPE_E1
+				&& !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
 			if (debug & DEBUG_HFCMULTI_PLXSD)
 				printk(KERN_DEBUG "Schedule jatt PLL\n");
 			hc->e1_resync |= 2; /* switch to jatt */
@@ -961,7 +978,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 				printk(KERN_DEBUG
 					"id=%d (0x%p) = PCM master syncronized "
 					"with QUARTZ\n", hc->id, hc);
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				/* Use the crystal clock for the PCM
 				   master card */
 				if (debug & DEBUG_HFCMULTI_PLXSD)
@@ -972,7 +989,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 				if (debug & DEBUG_HFCMULTI_PLXSD)
 					printk(KERN_DEBUG
 					    "QUARTZ is automatically "
-					    "enabled by HFC-%dS\n", hc->type);
+					    "enabled by HFC-%dS\n", hc->ctype);
 			}
 			plx_acc_32 = hc->plx_membase + PLX_GPIOC;
 			pv = readl(plx_acc_32);
@@ -996,7 +1013,7 @@ plxsd_checksync(struct hfc_multi *hc, int rm)
 	if (hc->syncronized) {
 		if (syncmaster == NULL) {
 			if (debug & DEBUG_HFCMULTI_PLXSD)
-				printk(KERN_WARNING "%s: GOT sync on card %d"
+				printk(KERN_DEBUG "%s: GOT sync on card %d"
 					" (id=%d)\n", __func__, hc->id + 1,
 					hc->id);
 			hfcmulti_resync(hc, hc, rm);
@@ -1004,7 +1021,7 @@ plxsd_checksync(struct hfc_multi *hc, int rm)
 	} else {
 		if (syncmaster == hc) {
 			if (debug & DEBUG_HFCMULTI_PLXSD)
-				printk(KERN_WARNING "%s: LOST sync on card %d"
+				printk(KERN_DEBUG "%s: LOST sync on card %d"
 					" (id=%d)\n", __func__, hc->id + 1,
 					hc->id);
 			hfcmulti_resync(hc, NULL, rm);
@@ -1053,20 +1070,23 @@ release_io_hfcmulti(struct hfc_multi *hc)
 		pv &= ~PLX_DSP_RES_N;
 		writel(pv, plx_acc_32);
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+			printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n",
 				__func__, pv);
 		spin_unlock_irqrestore(&plx_lock, plx_flags);
 	}
 
 	/* disable memory mapped ports / io ports */
 	test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
-	pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+	if (hc->pci_dev)
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
 	if (hc->pci_membase)
 		iounmap(hc->pci_membase);
 	if (hc->plx_membase)
 		iounmap(hc->plx_membase);
 	if (hc->pci_iobase)
 		release_region(hc->pci_iobase, 8);
+	if (hc->xhfc_membase)
+		iounmap((void *)hc->xhfc_membase);
 
 	if (hc->pci_dev) {
 		pci_disable_device(hc->pci_dev);
@@ -1100,8 +1120,9 @@ init_chip(struct hfc_multi *hc)
 	/* revision check */
 	if (debug & DEBUG_HFCMULTI_INIT)
 		printk(KERN_DEBUG "%s: entered\n", __func__);
-	val = HFC_inb(hc, R_CHIP_ID)>>4;
-	if (val != 0x8 && val != 0xc && val != 0xe) {
+	val = HFC_inb(hc, R_CHIP_ID);
+	if ((val >> 4) != 0x8 && (val >> 4) != 0xc && (val >> 4) != 0xe &&
+	    (val >> 1) != 0x31) {
 		printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
 		err = -EIO;
 		goto out;
@@ -1109,8 +1130,9 @@ init_chip(struct hfc_multi *hc)
 	rev = HFC_inb(hc, R_CHIP_RV);
 	printk(KERN_INFO
 	    "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
-	    val, rev, (rev == 0) ? " (old FIFO handling)" : "");
-	if (rev == 0) {
+	    val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ?
+		" (old FIFO handling)" : "");
+	if (hc->ctype != HFC_TYPE_XHFC && rev == 0) {
 		test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
 		printk(KERN_WARNING
 		    "HFC_multi: NOTE: Your chip is revision 0, "
@@ -1152,6 +1174,12 @@ init_chip(struct hfc_multi *hc)
 		hc->Zlen = 8000;
 		hc->DTMFbase = 0x2000;
 	}
+	if (hc->ctype == HFC_TYPE_XHFC) {
+		hc->Flen = 0x8;
+		hc->Zmin = 0x0;
+		hc->Zlen = 64;
+		hc->DTMFbase = 0x0;
+	}
 	hc->max_trans = poll << 1;
 	if (hc->max_trans > hc->Zlen)
 		hc->max_trans = hc->Zlen;
@@ -1176,7 +1204,7 @@ init_chip(struct hfc_multi *hc)
 		writel(pv, plx_acc_32);
 		spin_unlock_irqrestore(&plx_lock, plx_flags);
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+			printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n",
 				__func__, pv);
 		/*
 		 * If we are the 3rd PLXSD card or higher, we must turn
@@ -1204,13 +1232,17 @@ init_chip(struct hfc_multi *hc)
 			writel(pv, plx_acc_32);
 			spin_unlock_irqrestore(&plx_lock, plx_flags);
 			if (debug & DEBUG_HFCMULTI_INIT)
-			    printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
-					__func__, pv);
+				printk(KERN_DEBUG
+				    "%s: term off: PLX_GPIO=%x\n",
+				    __func__, pv);
 		}
 		spin_unlock_irqrestore(&HFClock, hfc_flags);
 		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
 	}
 
+	if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+
 	/* we only want the real Z2 read-pointer for revision > 0 */
 	if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
 		hc->hw.r_ram_sz |= V_FZ_MD;
@@ -1234,15 +1266,24 @@ init_chip(struct hfc_multi *hc)
 
 	/* soft reset */
 	HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
-	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	if (hc->ctype == HFC_TYPE_XHFC)
+		HFC_outb(hc, 0x0C /* R_FIFO_THRES */,
+				0x11 /* 16 Bytes TX/RX */);
+	else
+		HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
 	HFC_outb(hc, R_FIFO_MD, 0);
-	hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+	if (hc->ctype == HFC_TYPE_XHFC)
+		hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES;
+	else
+		hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES
+			| V_RLD_EPR;
 	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
 	udelay(100);
 	hc->hw.r_cirm = 0;
 	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
 	udelay(100);
-	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	if (hc->ctype != HFC_TYPE_XHFC)
+		HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
 
 	/* Speech Design PLX bridge pcm and sync mode */
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
@@ -1254,13 +1295,13 @@ init_chip(struct hfc_multi *hc)
 			pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
 			pv |= PLX_SYNC_O_EN;
 			if (debug & DEBUG_HFCMULTI_INIT)
-				printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+				printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n",
 					__func__, pv);
 		} else {
 			pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
 			pv &= ~PLX_SYNC_O_EN;
 			if (debug & DEBUG_HFCMULTI_INIT)
-				printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+				printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n",
 					__func__, pv);
 		}
 		writel(pv, plx_acc_32);
@@ -1278,13 +1319,16 @@ init_chip(struct hfc_multi *hc)
 	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
 		HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+	else if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+		HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */
 	else
 		HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
 	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
 	for (i = 0; i < 256; i++) {
 		HFC_outb_nodebug(hc, R_SLOT, i);
 		HFC_outb_nodebug(hc, A_SL_CFG, 0);
-		HFC_outb_nodebug(hc, A_CONF, 0);
+		if (hc->ctype != HFC_TYPE_XHFC)
+			HFC_outb_nodebug(hc, A_CONF, 0);
 		hc->slot_owner[i] = -1;
 	}
 
@@ -1296,6 +1340,9 @@ init_chip(struct hfc_multi *hc)
 		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
 	}
 
+	if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+		HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */);
+
 	/* B410P GPIO */
 	if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
 		printk(KERN_NOTICE "Setting GPIOs\n");
@@ -1366,8 +1413,8 @@ controller_fail:
 				writel(pv, plx_acc_32);
 				spin_unlock_irqrestore(&plx_lock, plx_flags);
 				if (debug & DEBUG_HFCMULTI_INIT)
-				    printk(KERN_WARNING "%s: master: PLX_GPIO"
-					"=%x\n", __func__, pv);
+					printk(KERN_DEBUG "%s: master: "
+					    "PLX_GPIO=%x\n", __func__, pv);
 			}
 			hc->hw.r_pcm_md0 |= V_PCM_MD;
 			HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
@@ -1401,7 +1448,7 @@ controller_fail:
 		writel(pv, plx_acc_32);
 		spin_unlock_irqrestore(&plx_lock, plx_flags);
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+			printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n",
 				__func__, pv);
 	}
 
@@ -1424,7 +1471,7 @@ controller_fail:
 	hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
 
 	/* set E1 state machine IRQ */
-	if (hc->type == 1)
+	if (hc->ctype == HFC_TYPE_E1)
 		hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
 
 	/* set DTMF detection */
@@ -1444,7 +1491,8 @@ controller_fail:
 		r_conf_en = V_CONF_EN | V_ULAW;
 	else
 		r_conf_en = V_CONF_EN;
-	HFC_outb(hc, R_CONF_EN, r_conf_en);
+	if (hc->ctype != HFC_TYPE_XHFC)
+		HFC_outb(hc, R_CONF_EN, r_conf_en);
 
 	/* setting leds */
 	switch (hc->leds) {
@@ -1468,16 +1516,23 @@ controller_fail:
 		break;
 	}
 
+	if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) {
+		hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */
+		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+	}
+
 	/* set master clock */
 	if (hc->masterclk >= 0) {
 		if (debug & DEBUG_HFCMULTI_INIT)
 			printk(KERN_DEBUG "%s: setting ST master clock "
 			    "to port %d (0..%d)\n",
 			    __func__, hc->masterclk, hc->ports-1);
-		hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+		hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC);
 		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
 	}
 
+
+
 	/* setting misc irq */
 	HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
 	if (debug & DEBUG_HFCMULTI_INIT)
@@ -1817,8 +1872,8 @@ hfcmulti_dtmf(struct hfc_multi *hc)
 			coeff[(co<<1)|1] = mantissa;
 		}
 		if (debug & DEBUG_HFCMULTI_DTMF)
-			printk("%s: DTMF ready %08x %08x %08x %08x "
-			    "%08x %08x %08x %08x\n", __func__,
+			printk(" DTMF ready %08x %08x %08x %08x "
+			    "%08x %08x %08x %08x\n",
 			    coeff[0], coeff[1], coeff[2], coeff[3],
 			    coeff[4], coeff[5], coeff[6], coeff[7]);
 		hc->chan[ch].coeff_count++;
@@ -1826,7 +1881,7 @@ hfcmulti_dtmf(struct hfc_multi *hc)
 			hc->chan[ch].coeff_count = 0;
 			skb = mI_alloc_skb(512, GFP_ATOMIC);
 			if (!skb) {
-				printk(KERN_WARNING "%s: No memory for skb\n",
+				printk(KERN_DEBUG "%s: No memory for skb\n",
 				    __func__);
 				continue;
 			}
@@ -1929,7 +1984,7 @@ next_frame:
 				Fspace = 1;
 		}
 		/* one frame only for ST D-channels, to allow resending */
-		if (hc->type != 1 && dch) {
+		if (hc->ctype != HFC_TYPE_E1 && dch) {
 			if (f1 != f2)
 				Fspace = 0;
 		}
@@ -1945,6 +2000,9 @@ next_frame:
 				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
 		z2 = temp; /* repeat unti Z2 is equal */
 	}
+	hc->chan[ch].Zfill = z1 - z2;
+	if (hc->chan[ch].Zfill < 0)
+		hc->chan[ch].Zfill += hc->Zlen;
 	Zspace = z2 - z1;
 	if (Zspace <= 0)
 		Zspace += hc->Zlen;
@@ -1968,12 +2026,22 @@ next_frame:
 					    "slot_tx %d\n",
 					    __func__, ch, slot_tx);
 				/* connect slot */
-				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
-				    V_HDLC_TRP | V_IFF);
+				if (hc->ctype == HFC_TYPE_XHFC)
+					HFC_outb(hc, A_CON_HDLC, 0xc0
+					    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+						/* Enable FIFO, no interrupt */
+				else
+					HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+					    V_HDLC_TRP | V_IFF);
 				HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
 				HFC_wait_nodebug(hc);
-				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
-				    V_HDLC_TRP | V_IFF);
+				if (hc->ctype == HFC_TYPE_XHFC)
+					HFC_outb(hc, A_CON_HDLC, 0xc0
+					    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+						/* Enable FIFO, no interrupt */
+				else
+					HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+					    V_HDLC_TRP | V_IFF);
 				HFC_outb_nodebug(hc, R_FIFO, ch<<1);
 				HFC_wait_nodebug(hc);
 			}
@@ -2001,10 +2069,22 @@ next_frame:
 			    "FIFO data: channel %d slot_tx %d\n",
 			    __func__, ch, slot_tx);
 		/* disconnect slot */
-		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		if (hc->ctype == HFC_TYPE_XHFC)
+			HFC_outb(hc, A_CON_HDLC, 0x80
+			    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+				/* Enable FIFO, no interrupt */
+		else
+			HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
+			    V_HDLC_TRP | V_IFF);
 		HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
 		HFC_wait_nodebug(hc);
-		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		if (hc->ctype == HFC_TYPE_XHFC)
+			HFC_outb(hc, A_CON_HDLC, 0x80
+			    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+				/* Enable FIFO, no interrupt */
+		else
+			HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
+			    V_HDLC_TRP | V_IFF);
 		HFC_outb_nodebug(hc, R_FIFO, ch<<1);
 		HFC_wait_nodebug(hc);
 	}
@@ -2027,10 +2107,11 @@ next_frame:
 		printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
 		    "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
 			__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
-			temp ? "HDLC":"TRANS");
+			temp ? "HDLC" : "TRANS");
 
 	/* Have to prep the audio data */
 	hc->write_fifo(hc, d, ii - i);
+	hc->chan[ch].Zfill += ii - i;
 	*idxp = ii;
 
 	/* if not all data has been written */
@@ -2226,7 +2307,7 @@ next_frame:
 			if (dch)
 				recv_Dchannel(dch);
 			else
-				recv_Bchannel(bch);
+				recv_Bchannel(bch, MISDN_ID_ANY);
 			*sp = skb;
 			again++;
 			goto next_frame;
@@ -2258,7 +2339,7 @@ next_frame:
 			    "(z1=%04x, z2=%04x) TRANS\n",
 				__func__, hc->id + 1, ch, Zsize, z1, z2);
 		/* only bch is transparent */
-		recv_Bchannel(bch);
+		recv_Bchannel(bch, hc->chan[ch].Zfill);
 		*sp = skb;
 	}
 }
@@ -2323,7 +2404,7 @@ handle_timer_irq(struct hfc_multi *hc)
 		spin_unlock_irqrestore(&HFClock, flags);
 	}
 
-	if (hc->type != 1 || hc->e1_state == 1)
+	if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1)
 		for (ch = 0; ch <= 31; ch++) {
 			if (hc->created[hc->chan[ch].port]) {
 				hfcmulti_tx(hc, ch);
@@ -2346,7 +2427,7 @@ handle_timer_irq(struct hfc_multi *hc)
 				}
 			}
 		}
-	if (hc->type == 1 && hc->created[0]) {
+	if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) {
 		dch = hc->chan[hc->dslot].dch;
 		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
 			/* LOS */
@@ -2606,7 +2687,10 @@ hfcmulti_interrupt(int intno, void *dev_id)
 		"card %d, this is no bug.\n", hc->id + 1, irqsem);
 	irqsem = hc->id + 1;
 #endif
-
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+	if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk)
+		goto irq_notforus;
+#endif
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 		spin_lock_irqsave(&plx_lock, flags);
 		plx_acc = hc->plx_membase + PLX_INTCSR;
@@ -2646,7 +2730,7 @@ hfcmulti_interrupt(int intno, void *dev_id)
 	}
 	hc->irqcnt++;
 	if (r_irq_statech) {
-		if (hc->type != 1)
+		if (hc->ctype != HFC_TYPE_E1)
 			ph_state_irq(hc, r_irq_statech);
 	}
 	if (status & V_EXT_IRQSTA)
@@ -2660,7 +2744,7 @@ hfcmulti_interrupt(int intno, void *dev_id)
 		r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
 		r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */
 		if (r_irq_misc & V_STA_IRQ) {
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				/* state machine */
 				dch = hc->chan[hc->dslot].dch;
 				e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
@@ -2699,13 +2783,13 @@ hfcmulti_interrupt(int intno, void *dev_id)
 			handle_timer_irq(hc);
 		}
 
-		if (r_irq_misc & V_DTMF_IRQ) {
+		if (r_irq_misc & V_DTMF_IRQ)
 			hfcmulti_dtmf(hc);
-		}
+
 		if (r_irq_misc & V_IRQ_PROC) {
 			static int irq_proc_cnt;
 			if (!irq_proc_cnt++)
-				printk(KERN_WARNING "%s: got V_IRQ_PROC -"
+				printk(KERN_DEBUG "%s: got V_IRQ_PROC -"
 				    " this should not happen\n", __func__);
 		}
 
@@ -2782,7 +2866,8 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		if (hc->slot_owner[oslot_tx<<1] == ch) {
 			HFC_outb(hc, R_SLOT, oslot_tx << 1);
 			HFC_outb(hc, A_SL_CFG, 0);
-			HFC_outb(hc, A_CONF, 0);
+			if (hc->ctype != HFC_TYPE_XHFC)
+				HFC_outb(hc, A_CONF, 0);
 			hc->slot_owner[oslot_tx<<1] = -1;
 		} else {
 			if (debug & DEBUG_HFCMULTI_MODE)
@@ -2835,7 +2920,9 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			    flow_tx, routing, conf);
 		HFC_outb(hc, R_SLOT, slot_tx << 1);
 		HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
-		HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+		if (hc->ctype != HFC_TYPE_XHFC)
+			HFC_outb(hc, A_CONF,
+				(conf < 0) ? 0 : (conf | V_CONF_SL));
 		hc->slot_owner[slot_tx << 1] = ch;
 		hc->chan[ch].slot_tx = slot_tx;
 		hc->chan[ch].bank_tx = bank_tx;
@@ -2852,7 +2939,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		else
 			flow_rx = 0xc0; /* ST->(FIFO,PCM) */
 		/* put on slot */
-		routing = bank_rx?0x80:0xc0; /* reversed */
+		routing = bank_rx ? 0x80 : 0xc0; /* reversed */
 		if (conf >= 0 || bank_rx > 1)
 			routing = 0x40; /* loop */
 		if (debug & DEBUG_HFCMULTI_MODE)
@@ -2885,9 +2972,9 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		HFC_outb(hc, A_IRQ_MSK, 0);
 		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
 		HFC_wait(hc);
-		if (hc->chan[ch].bch && hc->type != 1) {
+		if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) {
 			hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
-			    ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+			    ((ch & 0x3) == 0) ? ~V_B1_EN : ~V_B2_EN;
 			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
 			/* undocumented: delay after R_ST_SEL */
 			udelay(1);
@@ -2961,8 +3048,13 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			/* enable TX fifo */
 			HFC_outb(hc, R_FIFO, ch << 1);
 			HFC_wait(hc);
-			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
-			    V_HDLC_TRP | V_IFF);
+			if (hc->ctype == HFC_TYPE_XHFC)
+				HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 |
+					V_HDLC_TRP | V_IFF);
+					/* Enable FIFO, no interrupt */
+			else
+				HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+					V_HDLC_TRP | V_IFF);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
 			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
@@ -2972,13 +3064,19 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			/* enable RX fifo */
 			HFC_outb(hc, R_FIFO, (ch<<1)|1);
 			HFC_wait(hc);
-			HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+			if (hc->ctype == HFC_TYPE_XHFC)
+				HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 |
+					V_HDLC_TRP);
+					/* Enable FIFO, no interrupt*/
+			else
+				HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 |
+						V_HDLC_TRP);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
 			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
 			HFC_wait(hc);
 		}
-		if (hc->type != 1) {
+		if (hc->ctype != HFC_TYPE_E1) {
 			hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
 			    ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
 			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
@@ -2999,7 +3097,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		/* enable TX fifo */
 		HFC_outb(hc, R_FIFO, ch<<1);
 		HFC_wait(hc);
-		if (hc->type == 1 || hc->chan[ch].bch) {
+		if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) {
 			/* E1 or B-channel */
 			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
@@ -3015,7 +3113,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		HFC_outb(hc, R_FIFO, (ch<<1)|1);
 		HFC_wait(hc);
 		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
-		if (hc->type == 1 || hc->chan[ch].bch)
+		if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch)
 			HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
 		else
 			HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
@@ -3024,7 +3122,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		HFC_wait(hc);
 		if (hc->chan[ch].bch) {
 			test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
-			if (hc->type != 1) {
+			if (hc->ctype != HFC_TYPE_E1) {
 				hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
 				  ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
 				HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
@@ -3104,7 +3202,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
 	case HW_RESET_REQ:
 		/* start activation */
 		spin_lock_irqsave(&hc->lock, flags);
-		if (hc->type == 1) {
+		if (hc->ctype == HFC_TYPE_E1) {
 			if (debug & DEBUG_HFCMULTI_MSG)
 				printk(KERN_DEBUG
 				    "%s: HW_RESET_REQ no BRI\n",
@@ -3125,7 +3223,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
 	case HW_DEACT_REQ:
 		/* start deactivation */
 		spin_lock_irqsave(&hc->lock, flags);
-		if (hc->type == 1) {
+		if (hc->ctype == HFC_TYPE_E1) {
 			if (debug & DEBUG_HFCMULTI_MSG)
 				printk(KERN_DEBUG
 				    "%s: HW_DEACT_REQ no BRI\n",
@@ -3159,7 +3257,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
 		break;
 	case HW_POWERUP_REQ:
 		spin_lock_irqsave(&hc->lock, flags);
-		if (hc->type == 1) {
+		if (hc->ctype == HFC_TYPE_E1) {
 			if (debug & DEBUG_HFCMULTI_MSG)
 				printk(KERN_DEBUG
 				    "%s: HW_POWERUP_REQ no BRI\n",
@@ -3236,7 +3334,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 				    __func__, hc->chan[dch->slot].port,
 				    hc->ports-1);
 			/* start activation */
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				ph_state_change(dch);
 				if (debug & DEBUG_HFCMULTI_STATE)
 					printk(KERN_DEBUG
@@ -3269,7 +3367,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 				    __func__, hc->chan[dch->slot].port,
 				    hc->ports-1);
 			/* start deactivation */
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				if (debug & DEBUG_HFCMULTI_MSG)
 					printk(KERN_DEBUG
 					    "%s: PH_DEACTIVATE no BRI\n",
@@ -3410,9 +3508,9 @@ handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 		switch (hh->id) {
 		case HFC_SPL_LOOP_ON: /* set sample loop */
 			if (debug & DEBUG_HFCMULTI_MSG)
-			printk(KERN_DEBUG
-			    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
-			    __func__, skb->len);
+				printk(KERN_DEBUG
+				    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+				    __func__, skb->len);
 			ret = 0;
 			break;
 		case HFC_SPL_LOOP_OFF: /* set silence */
@@ -3489,6 +3587,8 @@ channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
 		features->hfc_id = hc->id;
 		if (test_bit(HFC_CHIP_DTMF, &hc->chip))
 			features->hfc_dtmf = 1;
+		if (test_bit(HFC_CHIP_CONF, &hc->chip))
+			features->hfc_conf = 1;
 		features->hfc_loops = 0;
 		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
 			features->hfc_echocanhw = 1;
@@ -3619,14 +3719,13 @@ ph_state_change(struct dchannel *dch)
 	int ch, i;
 
 	if (!dch) {
-		printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
-		    __func__);
+		printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__);
 		return;
 	}
 	hc = dch->hw;
 	ch = dch->slot;
 
-	if (hc->type == 1) {
+	if (hc->ctype == HFC_TYPE_E1) {
 		if (dch->dev.D.protocol == ISDN_P_TE_E1) {
 			if (debug & DEBUG_HFCMULTI_STATE)
 				printk(KERN_DEBUG
@@ -3641,14 +3740,15 @@ ph_state_change(struct dchannel *dch)
 		switch (dch->state) {
 		case (1):
 			if (hc->e1_state != 1) {
-			    for (i = 1; i <= 31; i++) {
-				/* reset fifos on e1 activation */
-				HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
-				HFC_wait_nodebug(hc);
-				HFC_outb_nodebug(hc,
-					R_INC_RES_FIFO, V_RES_F);
-				HFC_wait_nodebug(hc);
-			    }
+				for (i = 1; i <= 31; i++) {
+					/* reset fifos on e1 activation */
+					HFC_outb_nodebug(hc, R_FIFO,
+						(i << 1) | 1);
+					HFC_wait_nodebug(hc);
+					HFC_outb_nodebug(hc, R_INC_RES_FIFO,
+						V_RES_F);
+					HFC_wait_nodebug(hc);
+				}
 			}
 			test_and_set_bit(FLG_ACTIVE, &dch->Flags);
 			_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
@@ -3751,7 +3851,7 @@ hfcmulti_initmode(struct dchannel *dch)
 	if (debug & DEBUG_HFCMULTI_INIT)
 		printk(KERN_DEBUG "%s: entered\n", __func__);
 
-	if (hc->type == 1) {
+	if (hc->ctype == HFC_TYPE_E1) {
 		hc->chan[hc->dslot].slot_tx = -1;
 		hc->chan[hc->dslot].slot_rx = -1;
 		hc->chan[hc->dslot].conf = -1;
@@ -3900,6 +4000,11 @@ hfcmulti_initmode(struct dchannel *dch)
 		}
 		if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
 			hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+		if (hc->ctype == HFC_TYPE_XHFC) {
+			hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */;
+			HFC_outb(hc, 0x35 /* A_ST_CTRL3 */,
+				0x7c << 1 /* V_ST_PULSE */);
+		}
 		/* line setup */
 		HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
 		/* disable E-channel */
@@ -3943,12 +4048,12 @@ open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
 		return -EINVAL;
 	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
 	    (dch->dev.D.protocol != rq->protocol)) {
-	    if (debug & DEBUG_HFCMULTI_MODE)
-		printk(KERN_WARNING "%s: change protocol %x to %x\n",
-		    __func__, dch->dev.D.protocol, rq->protocol);
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: change protocol %x to %x\n",
+			    __func__, dch->dev.D.protocol, rq->protocol);
 	}
-	if ((dch->dev.D.protocol == ISDN_P_TE_S0)
-	 && (rq->protocol != ISDN_P_TE_S0))
+	if ((dch->dev.D.protocol == ISDN_P_TE_S0) &&
+	    (rq->protocol != ISDN_P_TE_S0))
 		l1_event(dch->l1, CLOSE_CHANNEL);
 	if (dch->dev.D.protocol != rq->protocol) {
 		if (rq->protocol == ISDN_P_TE_S0) {
@@ -3986,7 +4091,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
 		return -EINVAL;
 	if (rq->protocol == ISDN_P_NONE)
 		return -EINVAL;
-	if (hc->type == 1)
+	if (hc->ctype == HFC_TYPE_E1)
 		ch = rq->adr.channel;
 	else
 		ch = (rq->adr.channel - 1) + (dch->slot - 2);
@@ -4013,11 +4118,41 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
 static int
 channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
 {
+	struct hfc_multi	*hc = dch->hw;
 	int	ret = 0;
+	int	wd_mode, wd_cnt;
 
 	switch (cq->op) {
 	case MISDN_CTRL_GETOP:
-		cq->op = 0;
+		cq->op = MISDN_CTRL_HFC_OP;
+		break;
+	case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */
+		wd_cnt = cq->p1 & 0xf;
+		wd_mode = !!(cq->p1 >> 4);
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s"
+			    ", counter 0x%x\n", __func__,
+			    wd_mode ? "AUTO" : "MANUAL", wd_cnt);
+		/* set the watchdog timer */
+		HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4));
+		hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0);
+		if (hc->ctype == HFC_TYPE_XHFC)
+			hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */;
+		/* init the watchdog register and reset the counter */
+		HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			/* enable the watchdog output for Speech-Design */
+			HFC_outb(hc, R_GPIO_SEL,  V_GPIO_SEL7);
+			HFC_outb(hc, R_GPIO_EN1,  V_GPIO_EN15);
+			HFC_outb(hc, R_GPIO_OUT1, 0);
+			HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15);
+		}
+		break;
+	case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
+			    __func__);
+		HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
 		break;
 	default:
 		printk(KERN_WARNING "%s: unknown Op %x\n",
@@ -4047,7 +4182,7 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 		switch (rq->protocol) {
 		case ISDN_P_TE_S0:
 		case ISDN_P_NT_S0:
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				err = -EINVAL;
 				break;
 			}
@@ -4055,7 +4190,7 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 			break;
 		case ISDN_P_TE_E1:
 		case ISDN_P_NT_E1:
-			if (hc->type != 1) {
+			if (hc->ctype != HFC_TYPE_E1) {
 				err = -EINVAL;
 				break;
 			}
@@ -4122,13 +4257,13 @@ init_card(struct hfc_multi *hc)
 	disable_hwirq(hc);
 	spin_unlock_irqrestore(&hc->lock, flags);
 
-	if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+	if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED,
 	    "HFC-multi", hc)) {
 		printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
-		    hc->pci_dev->irq);
+		    hc->irq);
+		hc->irq = 0;
 		return -EIO;
 	}
-	hc->irq = hc->pci_dev->irq;
 
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 		spin_lock_irqsave(&plx_lock, plx_flags);
@@ -4187,7 +4322,7 @@ error:
 	}
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+		printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq);
 	if (hc->irq) {
 		free_irq(hc->irq, hc);
 		hc->irq = 0;
@@ -4235,6 +4370,10 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 	hc->ledstate = 0xAFFEAFFE;
 	hc->opticalsupport = m->opticalsupport;
 
+	hc->pci_iobase = 0;
+	hc->pci_membase = NULL;
+	hc->plx_membase = NULL;
+
 	/* set memory access methods */
 	if (m->io_mode) /* use mode from card config */
 		hc->io_mode = m->io_mode;
@@ -4242,44 +4381,12 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 	case HFC_IO_MODE_PLXSD:
 		test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
 		hc->slots = 128; /* required */
-		/* fall through */
-	case HFC_IO_MODE_PCIMEM:
 		hc->HFC_outb = HFC_outb_pcimem;
 		hc->HFC_inb = HFC_inb_pcimem;
 		hc->HFC_inw = HFC_inw_pcimem;
 		hc->HFC_wait = HFC_wait_pcimem;
 		hc->read_fifo = read_fifo_pcimem;
 		hc->write_fifo = write_fifo_pcimem;
-		break;
-	case HFC_IO_MODE_REGIO:
-		hc->HFC_outb = HFC_outb_regio;
-		hc->HFC_inb = HFC_inb_regio;
-		hc->HFC_inw = HFC_inw_regio;
-		hc->HFC_wait = HFC_wait_regio;
-		hc->read_fifo = read_fifo_regio;
-		hc->write_fifo = write_fifo_regio;
-		break;
-	default:
-		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
-		pci_disable_device(hc->pci_dev);
-		return -EIO;
-	}
-	hc->HFC_outb_nodebug = hc->HFC_outb;
-	hc->HFC_inb_nodebug = hc->HFC_inb;
-	hc->HFC_inw_nodebug = hc->HFC_inw;
-	hc->HFC_wait_nodebug = hc->HFC_wait;
-#ifdef HFC_REGISTER_DEBUG
-	hc->HFC_outb = HFC_outb_debug;
-	hc->HFC_inb = HFC_inb_debug;
-	hc->HFC_inw = HFC_inw_debug;
-	hc->HFC_wait = HFC_wait_debug;
-#endif
-	hc->pci_iobase = 0;
-	hc->pci_membase = NULL;
-	hc->plx_membase = NULL;
-
-	switch (hc->io_mode) {
-	case HFC_IO_MODE_PLXSD:
 		hc->plx_origmembase =  hc->pci_dev->resource[0].start;
 		/* MEMBASE 1 is PLX PCI Bridge */
 
@@ -4327,6 +4434,12 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
 		break;
 	case HFC_IO_MODE_PCIMEM:
+		hc->HFC_outb = HFC_outb_pcimem;
+		hc->HFC_inb = HFC_inb_pcimem;
+		hc->HFC_inw = HFC_inw_pcimem;
+		hc->HFC_wait = HFC_wait_pcimem;
+		hc->read_fifo = read_fifo_pcimem;
+		hc->write_fifo = write_fifo_pcimem;
 		hc->pci_origmembase = hc->pci_dev->resource[1].start;
 		if (!hc->pci_origmembase) {
 			printk(KERN_WARNING
@@ -4343,12 +4456,18 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 			pci_disable_device(hc->pci_dev);
 			return -EIO;
 		}
-		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
-		    "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ "
+		    "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
 		    hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
 		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
 		break;
 	case HFC_IO_MODE_REGIO:
+		hc->HFC_outb = HFC_outb_regio;
+		hc->HFC_inb = HFC_inb_regio;
+		hc->HFC_inw = HFC_inw_regio;
+		hc->HFC_wait = HFC_wait_regio;
+		hc->read_fifo = read_fifo_regio;
+		hc->write_fifo = write_fifo_regio;
 		hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
 		if (!hc->pci_iobase) {
 			printk(KERN_WARNING
@@ -4430,7 +4549,7 @@ release_port(struct hfc_multi *hc, struct dchannel *dch)
 		dch->timer.function = NULL;
 	}
 
-	if (hc->type == 1) { /* E1 */
+	if (hc->ctype == HFC_TYPE_E1) { /* E1 */
 		/* remove sync */
 		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 			hc->syncronized = 0;
@@ -4508,7 +4627,7 @@ release_card(struct hfc_multi *hc)
 	int	ch;
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: release card (%d) entered\n",
+		printk(KERN_DEBUG "%s: release card (%d) entered\n",
 		    __func__, hc->id);
 
 	/* unregister clock source */
@@ -4537,7 +4656,7 @@ release_card(struct hfc_multi *hc)
 	/* release hardware & irq */
 	if (hc->irq) {
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: free irq %d\n",
+			printk(KERN_DEBUG "%s: free irq %d\n",
 			    __func__, hc->irq);
 		free_irq(hc->irq, hc);
 		hc->irq = 0;
@@ -4546,17 +4665,17 @@ release_card(struct hfc_multi *hc)
 	release_io_hfcmulti(hc);
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: remove instance from list\n",
+		printk(KERN_DEBUG "%s: remove instance from list\n",
 		     __func__);
 	list_del(&hc->list);
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: delete instance\n", __func__);
+		printk(KERN_DEBUG "%s: delete instance\n", __func__);
 	if (hc == syncmaster)
 		syncmaster = NULL;
 	kfree(hc);
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: card successfully removed\n",
+		printk(KERN_DEBUG "%s: card successfully removed\n",
 		    __func__);
 }
 
@@ -4579,7 +4698,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m)
 	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
 	dch->dev.D.send = handle_dmsg;
 	dch->dev.D.ctrl = hfcm_dctrl;
-	dch->dev.nrbchan = (hc->dslot)?30:31;
+	dch->dev.nrbchan = (hc->dslot) ? 30 : 31;
 	dch->slot = hc->dslot;
 	hc->chan[hc->dslot].dch = dch;
 	hc->chan[hc->dslot].port = 0;
@@ -4821,7 +4940,7 @@ init_multi_port(struct hfc_multi *hc, int pt)
 	}
 	/* disable E-channel */
 	if (port[Port_cnt] & 0x004) {
-	if (debug & DEBUG_HFCMULTI_INIT)
+		if (debug & DEBUG_HFCMULTI_INIT)
 			printk(KERN_DEBUG
 			    "%s: PROTOCOL disable E-channel: "
 			    "card(%d) port(%d)\n",
@@ -4829,9 +4948,15 @@ init_multi_port(struct hfc_multi *hc, int pt)
 		test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
 		    &hc->chan[i + 2].cfg);
 	}
-	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
-		hc->type, HFC_cnt + 1, pt + 1);
-	ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
+	if (hc->ctype == HFC_TYPE_XHFC) {
+		snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d",
+			HFC_cnt + 1, pt + 1);
+		ret = mISDN_register_device(&dch->dev, NULL, name);
+	} else {
+		snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
+			hc->ctype, HFC_cnt + 1, pt + 1);
+		ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
+	}
 	if (ret)
 		goto free_chan;
 	hc->created[pt] = 1;
@@ -4842,9 +4967,9 @@ free_chan:
 }
 
 static int
-hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+hfcmulti_init(struct hm_map *m, struct pci_dev *pdev,
+    const struct pci_device_id *ent)
 {
-	struct hm_map	*m = (struct hm_map *)ent->driver_data;
 	int		ret_err = 0;
 	int		pt;
 	struct hfc_multi	*hc;
@@ -4879,16 +5004,18 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	spin_lock_init(&hc->lock);
 	hc->mtyp = m;
-	hc->type =  m->type;
+	hc->ctype =  m->type;
 	hc->ports = m->ports;
 	hc->id = HFC_cnt;
 	hc->pcm = pcm[HFC_cnt];
 	hc->io_mode = iomode[HFC_cnt];
-	if (dslot[HFC_cnt] < 0 && hc->type == 1) {
+	if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) {
 		hc->dslot = 0;
 		printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
 			"31 B-channels\n");
-	} if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 && hc->type == 1) {
+	}
+	if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32
+	    && hc->ctype == HFC_TYPE_E1) {
 		hc->dslot = dslot[HFC_cnt];
 		printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
 			"time slot %d\n", dslot[HFC_cnt]);
@@ -4910,8 +5037,11 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < (poll >> 1); i++)
 		hc->silence_data[i] = hc->silence;
 
-	if (!(type[HFC_cnt] & 0x200))
-		test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+	if (hc->ctype != HFC_TYPE_XHFC) {
+		if (!(type[HFC_cnt] & 0x200))
+			test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+		test_and_set_bit(HFC_CHIP_CONF, &hc->chip);
+	}
 
 	if (type[HFC_cnt] & 0x800)
 		test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
@@ -4935,8 +5065,18 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		printk(KERN_NOTICE "Watchdog enabled\n");
 	}
 
-	/* setup pci, hc->slots may change due to PLXSD */
-	ret_err = setup_pci(hc, pdev, ent);
+	if (pdev && ent)
+		/* setup pci, hc->slots may change due to PLXSD */
+		ret_err = setup_pci(hc, pdev, ent);
+	else
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+		ret_err = setup_embedded(hc, m);
+#else
+	{
+		printk(KERN_WARNING "Embedded IO Mode not selected\n");
+		ret_err = -EIO;
+	}
+#endif
 	if (ret_err) {
 		if (hc == syncmaster)
 			syncmaster = NULL;
@@ -4944,7 +5084,17 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return ret_err;
 	}
 
-	/* crate channels */
+	hc->HFC_outb_nodebug = hc->HFC_outb;
+	hc->HFC_inb_nodebug = hc->HFC_inb;
+	hc->HFC_inw_nodebug = hc->HFC_inw;
+	hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+	hc->HFC_outb = HFC_outb_debug;
+	hc->HFC_inb = HFC_inb_debug;
+	hc->HFC_inw = HFC_inw_debug;
+	hc->HFC_wait = HFC_wait_debug;
+#endif
+	/* create channels */
 	for (pt = 0; pt < hc->ports; pt++) {
 		if (Port_cnt >= MAX_PORTS) {
 			printk(KERN_ERR "too many ports (max=%d).\n",
@@ -4952,7 +5102,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 			ret_err = -EINVAL;
 			goto free_card;
 		}
-		if (hc->type == 1)
+		if (hc->ctype == HFC_TYPE_E1)
 			ret_err = init_e1_port(hc, m);
 		else
 			ret_err = init_multi_port(hc, pt);
@@ -5036,6 +5186,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc);
 
 	/* initialize hardware */
+	hc->irq = (m->irq) ? : hc->pci_dev->irq;
 	ret_err = init_card(hc);
 	if (ret_err) {
 		printk(KERN_ERR "init card returns %d\n", ret_err);
@@ -5074,7 +5225,7 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev)
 		spin_unlock_irqrestore(&HFClock, flags);
 	}  else {
 		if (debug)
-			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			printk(KERN_DEBUG "%s: drvdata allready removed\n",
 			    __func__);
 	}
 }
@@ -5086,45 +5237,48 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev)
 #define VENDOR_PRIM	"PrimuX"
 
 static const struct hm_map hfcm_map[] = {
-/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
-/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
-/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
-/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
-/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
-/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
-/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
-/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
-
-/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0},
+/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
+/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0},
+/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0},
+/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
+/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0},
+/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0},
+/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0},
+/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0},
+/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0},
+
+/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0},
 /*13*/	{VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
-		HFC_IO_MODE_REGIO},
-/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
-/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+		HFC_IO_MODE_REGIO, 0},
+/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0},
+/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0},
 
-/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
-/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
-/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0},
+/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
+/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
 
-/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
-/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
+/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0},
+/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
+/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
 
-/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
-/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
-/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0},
+/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0},
+/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0},
 
 /*26*/	{VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
-		HFC_IO_MODE_PLXSD},
+		HFC_IO_MODE_PLXSD, 0},
 /*27*/	{VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
-		HFC_IO_MODE_PLXSD},
-/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
-/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
-/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+		HFC_IO_MODE_PLXSD, 0},
+/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0},
+/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0},
+/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0},
+/*31*/	{VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0,
+		HFC_IO_MODE_EMBSD, XHFC_IRQ},
+/*32*/	{VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0},
 };
 
 #undef H
@@ -5178,6 +5332,8 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
 		PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
 		PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JH8S, 0, 0, H(32)}, /* Junganns 8S  */
 
 
 	/* Cards with HFC-E1 Chip */
@@ -5201,6 +5357,10 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
 		PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
 		PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JHSE1, 0, 0, H(25)}, /* Junghanns E1 */
+
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, 0},
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
@@ -5231,7 +5391,7 @@ hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		    "Please contact the driver maintainer for support.\n");
 		return -ENODEV;
 	}
-	ret = hfcmulti_init(pdev, ent);
+	ret = hfcmulti_init(m, pdev, ent);
 	if (ret)
 		return ret;
 	HFC_cnt++;
@@ -5261,6 +5421,8 @@ static int __init
 HFCmulti_init(void)
 {
 	int err;
+	int i, xhfc = 0;
+	struct hm_map m;
 
 	printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
 
@@ -5308,11 +5470,43 @@ HFCmulti_init(void)
 	if (!clock)
 		clock = 1;
 
+	/* Register the embedded devices.
+	 * This should be done before the PCI cards registration */
+	switch (hwid) {
+	case HWID_MINIP4:
+		xhfc = 1;
+		m = hfcm_map[31];
+		break;
+	case HWID_MINIP8:
+		xhfc = 2;
+		m = hfcm_map[31];
+		break;
+	case HWID_MINIP16:
+		xhfc = 4;
+		m = hfcm_map[31];
+		break;
+	default:
+		xhfc = 0;
+	}
+
+	for (i = 0; i < xhfc; ++i) {
+		err = hfcmulti_init(&m, NULL, NULL);
+		if (err) {
+			printk(KERN_ERR "error registering embedded driver: "
+				"%x\n", err);
+			return -err;
+		}
+		HFC_cnt++;
+		printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+	}
+
+	/* Register the PCI cards */
 	err = pci_register_driver(&hfcmultipci_driver);
 	if (err < 0) {
 		printk(KERN_ERR "error registering pci driver: %x\n", err);
 		return err;
 	}
+
 	return 0;
 }
 
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 641a9cd1a53..228ffbed128 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -257,7 +257,7 @@ reset_hfcpci(struct hfc_pci *hc)
 	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
 
 	/* Clear already pending ints */
-	if (Read_hfc(hc, HFCPCI_INT_S1));
+	val = Read_hfc(hc, HFCPCI_INT_S1);
 
 	/* set NT/TE mode */
 	hfcpci_setmode(hc);
@@ -452,7 +452,7 @@ hfcpci_empty_bfifo(struct bchannel *bch, struct bzfifo *bz,
 		}
 		bz->za[new_f2].z2 = cpu_to_le16(new_z2);
 		bz->f2 = new_f2;	/* next buffer */
-		recv_Bchannel(bch);
+		recv_Bchannel(bch, MISDN_ID_ANY);
 	}
 }
 
@@ -499,7 +499,8 @@ receive_dmsg(struct hfc_pci *hc)
 			df->f2 = ((df->f2 + 1) & MAX_D_FRAMES) |
 			    (MAX_D_FRAMES + 1);	/* next buffer */
 			df->za[df->f2 & D_FREG_MASK].z2 =
-			    cpu_to_le16((le16_to_cpu(zp->z2) + rcnt) & (D_FIFO_SIZE - 1));
+			    cpu_to_le16((le16_to_cpu(zp->z2) + rcnt) &
+			    (D_FIFO_SIZE - 1));
 		} else {
 			dch->rx_skb = mI_alloc_skb(rcnt - 3, GFP_ATOMIC);
 			if (!dch->rx_skb) {
@@ -541,35 +542,45 @@ receive_dmsg(struct hfc_pci *hc)
  * check for transparent receive data and read max one 'poll' size if avail
  */
 static void
-hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
+hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *rxbz,
+	struct bzfifo *txbz, u_char *bdata)
 {
-	 __le16 *z1r, *z2r;
-	int		new_z2, fcnt, maxlen;
-	u_char		*ptr, *ptr1;
+	 __le16	*z1r, *z2r, *z1t, *z2t;
+	int	new_z2, fcnt_rx, fcnt_tx, maxlen;
+	u_char	*ptr, *ptr1;
 
-	z1r = &bz->za[MAX_B_FRAMES].z1;		/* pointer to z reg */
+	z1r = &rxbz->za[MAX_B_FRAMES].z1;	/* pointer to z reg */
 	z2r = z1r + 1;
+	z1t = &txbz->za[MAX_B_FRAMES].z1;
+	z2t = z1t + 1;
 
-	fcnt = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
-	if (!fcnt)
+	fcnt_rx = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
+	if (!fcnt_rx)
 		return;	/* no data avail */
 
-	if (fcnt <= 0)
-		fcnt += B_FIFO_SIZE;	/* bytes actually buffered */
-	new_z2 = le16_to_cpu(*z2r) + fcnt;	/* new position in fifo */
+	if (fcnt_rx <= 0)
+		fcnt_rx += B_FIFO_SIZE;	/* bytes actually buffered */
+	new_z2 = le16_to_cpu(*z2r) + fcnt_rx;	/* new position in fifo */
 	if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
 		new_z2 -= B_FIFO_SIZE;	/* buffer wrap */
 
-	if (fcnt > MAX_DATA_SIZE) {	/* flush, if oversized */
+	if (fcnt_rx > MAX_DATA_SIZE) {	/* flush, if oversized */
 		*z2r = cpu_to_le16(new_z2);		/* new position */
 		return;
 	}
 
-	bch->rx_skb = mI_alloc_skb(fcnt, GFP_ATOMIC);
+	fcnt_tx = le16_to_cpu(*z2t) - le16_to_cpu(*z1t);
+	if (fcnt_tx <= 0)
+		fcnt_tx += B_FIFO_SIZE;
+		    /* fcnt_tx contains available bytes in tx-fifo */
+	fcnt_tx = B_FIFO_SIZE - fcnt_tx;
+		    /* remaining bytes to send (bytes in tx-fifo) */
+
+	bch->rx_skb = mI_alloc_skb(fcnt_rx, GFP_ATOMIC);
 	if (bch->rx_skb) {
-		ptr = skb_put(bch->rx_skb, fcnt);
-		if (le16_to_cpu(*z2r) + fcnt <= B_FIFO_SIZE + B_SUB_VAL)
-			maxlen = fcnt;	/* complete transfer */
+		ptr = skb_put(bch->rx_skb, fcnt_rx);
+		if (le16_to_cpu(*z2r) + fcnt_rx <= B_FIFO_SIZE + B_SUB_VAL)
+			maxlen = fcnt_rx;	/* complete transfer */
 		else
 			maxlen = B_FIFO_SIZE + B_SUB_VAL - le16_to_cpu(*z2r);
 			    /* maximum */
@@ -577,14 +588,14 @@ hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
 		ptr1 = bdata + (le16_to_cpu(*z2r) - B_SUB_VAL);
 		    /* start of data */
 		memcpy(ptr, ptr1, maxlen);	/* copy data */
-		fcnt -= maxlen;
+		fcnt_rx -= maxlen;
 
-		if (fcnt) {	/* rest remaining */
+		if (fcnt_rx) {	/* rest remaining */
 			ptr += maxlen;
 			ptr1 = bdata;	/* start of buffer */
-			memcpy(ptr, ptr1, fcnt);	/* rest */
+			memcpy(ptr, ptr1, fcnt_rx);	/* rest */
 		}
-		recv_Bchannel(bch);
+		recv_Bchannel(bch, fcnt_tx); /* bch, id */
 	} else
 		printk(KERN_WARNING "HFCPCI: receive out of memory\n");
 
@@ -600,26 +611,28 @@ main_rec_hfcpci(struct bchannel *bch)
 	struct hfc_pci	*hc = bch->hw;
 	int		rcnt, real_fifo;
 	int		receive = 0, count = 5;
-	struct bzfifo	*bz;
+	struct bzfifo	*txbz, *rxbz;
 	u_char		*bdata;
 	struct zt	*zp;
 
 	if ((bch->nr & 2) && (!hc->hw.bswapped)) {
-		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		rxbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		txbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b2;
 		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b2;
 		real_fifo = 1;
 	} else {
-		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		rxbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		txbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b1;
 		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b1;
 		real_fifo = 0;
 	}
 Begin:
 	count--;
-	if (bz->f1 != bz->f2) {
+	if (rxbz->f1 != rxbz->f2) {
 		if (bch->debug & DEBUG_HW_BCHANNEL)
 			printk(KERN_DEBUG "hfcpci rec ch(%x) f1(%d) f2(%d)\n",
-			    bch->nr, bz->f1, bz->f2);
-		zp = &bz->za[bz->f2];
+			    bch->nr, rxbz->f1, rxbz->f2);
+		zp = &rxbz->za[rxbz->f2];
 
 		rcnt = le16_to_cpu(zp->z1) - le16_to_cpu(zp->z2);
 		if (rcnt < 0)
@@ -630,8 +643,8 @@ Begin:
 			    "hfcpci rec ch(%x) z1(%x) z2(%x) cnt(%d)\n",
 			    bch->nr, le16_to_cpu(zp->z1),
 			    le16_to_cpu(zp->z2), rcnt);
-		hfcpci_empty_bfifo(bch, bz, bdata, rcnt);
-		rcnt = bz->f1 - bz->f2;
+		hfcpci_empty_bfifo(bch, rxbz, bdata, rcnt);
+		rcnt = rxbz->f1 - rxbz->f2;
 		if (rcnt < 0)
 			rcnt += MAX_B_FRAMES + 1;
 		if (hc->hw.last_bfifo_cnt[real_fifo] > rcnt + 1) {
@@ -644,7 +657,7 @@ Begin:
 		else
 			receive = 0;
 	} else if (test_bit(FLG_TRANSPARENT, &bch->Flags)) {
-		hfcpci_empty_fifo_trans(bch, bz, bdata);
+		hfcpci_empty_fifo_trans(bch, rxbz, txbz, bdata);
 		return;
 	} else
 		receive = 0;
@@ -954,6 +967,7 @@ static void
 ph_state_nt(struct dchannel *dch)
 {
 	struct hfc_pci	*hc = dch->hw;
+	u_char	val;
 
 	if (dch->debug)
 		printk(KERN_DEBUG "%s: NT newstate %x\n",
@@ -967,7 +981,7 @@ ph_state_nt(struct dchannel *dch)
 			hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
 			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
 			/* Clear already pending ints */
-			if (Read_hfc(hc, HFCPCI_INT_S1));
+			val = Read_hfc(hc, HFCPCI_INT_S1);
 			Write_hfc(hc, HFCPCI_STATES, 4 | HFCPCI_LOAD_STATE);
 			udelay(10);
 			Write_hfc(hc, HFCPCI_STATES, 4);
@@ -1256,8 +1270,7 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
 		rx_slot = (bc>>8) & 0xff;
 		tx_slot = (bc>>16) & 0xff;
 		bc = bc & 0xff;
-	} else if (test_bit(HFC_CFG_PCM, &hc->cfg) &&
-	    (protocol > ISDN_P_NONE))
+	} else if (test_bit(HFC_CFG_PCM, &hc->cfg) && (protocol > ISDN_P_NONE))
 		printk(KERN_WARNING "%s: no pcm channel id but HFC_CFG_PCM\n",
 		    __func__);
 	if (hc->chanlimit > 1) {
@@ -1315,8 +1328,8 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
 	case (ISDN_P_B_RAW):
 		bch->state = protocol;
 		bch->nr = bc;
-		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
-		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2) ? 1 : 0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2) ? 1 : 0);
 		if (bc & 2) {
 			hc->hw.sctrl |= SCTRL_B2_ENA;
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
@@ -1350,8 +1363,8 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
 	case (ISDN_P_B_HDLC):
 		bch->state = protocol;
 		bch->nr = bc;
-		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
-		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2) ? 1 : 0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2) ? 1 : 0);
 		if (bc & 2) {
 			hc->hw.sctrl |= SCTRL_B2_ENA;
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
@@ -1445,7 +1458,7 @@ set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
 	switch (protocol) {
 	case (ISDN_P_B_RAW):
 		bch->state = protocol;
-		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (chan & 2) ? 1 : 0);
 		if (chan & 2) {
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
 			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
@@ -1470,7 +1483,7 @@ set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
 		break;
 	case (ISDN_P_B_HDLC):
 		bch->state = protocol;
-		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (chan & 2) ? 1 : 0);
 		if (chan & 2) {
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
 			hc->hw.last_bfifo_cnt[1] = 0;
@@ -1793,10 +1806,9 @@ init_card(struct hfc_pci *hc)
 			printk(KERN_WARNING
 			    "HFC PCI: IRQ(%d) getting no interrupts "
 			    "during init %d\n", hc->irq, 4 - cnt);
-			if (cnt == 1) {
-				spin_unlock_irqrestore(&hc->lock, flags);
-				return -EIO;
-			} else {
+			if (cnt == 1)
+				break;
+			else {
 				reset_hfcpci(hc);
 				cnt--;
 			}
@@ -2035,7 +2047,8 @@ setup_hw(struct hfc_pci *hc)
 		printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
 		return 1;
 	}
-	hc->hw.pci_io = (char __iomem *)(unsigned long)hc->pdev->resource[1].start;
+	hc->hw.pci_io =
+		(char __iomem *)(unsigned long)hc->pdev->resource[1].start;
 
 	if (!hc->hw.pci_io) {
 		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
@@ -2277,7 +2290,7 @@ hfc_remove_pci(struct pci_dev *pdev)
 		release_card(card);
 	else
 		if (debug)
-			printk(KERN_WARNING "%s: drvdata already removed\n",
+			printk(KERN_DEBUG "%s: drvdata already removed\n",
 			    __func__);
 }
 
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 9c427fb204e..6b7704c41b9 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -947,7 +947,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
 				if (fifo->dch)
 					recv_Dchannel(fifo->dch);
 				if (fifo->bch)
-					recv_Bchannel(fifo->bch);
+					recv_Bchannel(fifo->bch, MISDN_ID_ANY);
 				if (fifo->ech)
 					recv_Echannel(fifo->ech,
 						     &hw->dch);
@@ -969,7 +969,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
 	} else {
 		/* deliver transparent data to layer2 */
 		if (rx_skb->len >= poll)
-			recv_Bchannel(fifo->bch);
+			recv_Bchannel(fifo->bch, MISDN_ID_ANY);
 	}
 	spin_unlock(&hw->lock);
 }
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index f1265667b06..3d337d924c2 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -82,8 +82,9 @@ release_io_hfcpci(struct IsdnCardState *cs)
 	Write_hfc(cs, HFCPCI_INT_M2, cs->hw.hfcpci.int_m2);
 	pci_write_config_word(cs->hw.hfcpci.dev, PCI_COMMAND, 0);	/* disable memory mapped ports + busmaster */
 	del_timer(&cs->hw.hfcpci.timer);
-	kfree(cs->hw.hfcpci.share_start);
-	cs->hw.hfcpci.share_start = NULL;
+	pci_free_consistent(cs->hw.hfcpci.dev, 0x8000,
+		cs->hw.hfcpci.fifos, cs->hw.hfcpci.dma);
+	cs->hw.hfcpci.fifos = NULL;
 	iounmap((void *)cs->hw.hfcpci.pci_io);
 }
 
@@ -1663,8 +1664,19 @@ setup_hfcpci(struct IsdnCard *card)
 					     dev_hfcpci);
 		i++;
 		if (tmp_hfcpci) {
+			dma_addr_t	dma_mask = DMA_BIT_MASK(32) & ~0x7fffUL;
 			if (pci_enable_device(tmp_hfcpci))
 				continue;
+			if (pci_set_dma_mask(tmp_hfcpci, dma_mask)) {
+				printk(KERN_WARNING
+					"HiSax hfc_pci: No suitable DMA available.\n");
+				continue;
+			}
+			if (pci_set_consistent_dma_mask(tmp_hfcpci, dma_mask)) {
+				printk(KERN_WARNING
+					"HiSax hfc_pci: No suitable consistent DMA available.\n");
+				continue;
+			}
 			pci_set_master(tmp_hfcpci);
 			if ((card->para[0]) && (card->para[0] != (tmp_hfcpci->resource[ 0].start & PCI_BASE_ADDRESS_IO_MASK)))
 				continue;
@@ -1693,22 +1705,29 @@ setup_hfcpci(struct IsdnCard *card)
 		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
 		return (0);
 	}
+
 	/* Allocate memory for FIFOS */
-	/* Because the HFC-PCI needs a 32K physical alignment, we */
-	/* need to allocate the double mem and align the address */
-	if (!(cs->hw.hfcpci.share_start = kmalloc(65536, GFP_KERNEL))) {
-		printk(KERN_WARNING "HFC-PCI: Error allocating memory for FIFO!\n");
+	cs->hw.hfcpci.fifos = pci_alloc_consistent(cs->hw.hfcpci.dev,
+					0x8000, &cs->hw.hfcpci.dma);
+	if (!cs->hw.hfcpci.fifos) {
+		printk(KERN_WARNING "HFC-PCI: Error allocating FIFO memory!\n");
+		return 0;
+	}
+	if (cs->hw.hfcpci.dma & 0x7fff) {
+		printk(KERN_WARNING
+		    "HFC-PCI: Error DMA memory not on 32K boundary (%lx)\n",
+		    (u_long)cs->hw.hfcpci.dma);
+		pci_free_consistent(cs->hw.hfcpci.dev, 0x8000,
+			cs->hw.hfcpci.fifos, cs->hw.hfcpci.dma);
 		return 0;
 	}
-	cs->hw.hfcpci.fifos = (void *)
-	    (((ulong) cs->hw.hfcpci.share_start) & ~0x7FFF) + 0x8000;
-	pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u_int) virt_to_bus(cs->hw.hfcpci.fifos));
+	pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u32)cs->hw.hfcpci.dma);
 	cs->hw.hfcpci.pci_io = ioremap((ulong) cs->hw.hfcpci.pci_io, 256);
 	printk(KERN_INFO
-	       "HFC-PCI: defined at mem %p fifo %p(%#x) IRQ %d HZ %d\n",
+	       "HFC-PCI: defined at mem %p fifo %p(%lx) IRQ %d HZ %d\n",
 	       cs->hw.hfcpci.pci_io,
 	       cs->hw.hfcpci.fifos,
-	       (u_int) virt_to_bus(cs->hw.hfcpci.fifos),
+	       (u_long)cs->hw.hfcpci.dma,
 	       cs->irq, HZ);
 
 	spin_lock_irqsave(&cs->lock, flags);
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index f8527046f19..0685c194696 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -703,7 +703,7 @@ struct hfcPCI_hw {
         int nt_timer;
         struct pci_dev *dev;
         unsigned char *pci_io; /* start of PCI IO memory */
-        void *share_start; /* shared memory for Fifos start */
+	dma_addr_t dma; /* dma handle for Fifos */
         void *fifos; /* FIFO memory */ 
         int last_bfifo_cnt[2]; /* marker saving last b-fifo frame count */
 	struct timer_list timer;
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index 53f6ad1235d..4ffaa14b9fc 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -67,7 +67,7 @@ hycapi_reset_ctr(struct capi_ctr *ctrl)
 	printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n");
 #endif
 	capilib_release(&cinfo->ncci_head);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 /******************************
@@ -347,7 +347,7 @@ int hycapi_capi_stop(hysdn_card *card)
 	if(cinfo) {
 		ctrl = &cinfo->capi_ctrl;
 /*		ctrl->suspend_output(ctrl); */
-		capi_ctr_reseted(ctrl);
+		capi_ctr_down(ctrl);
 	}
 	return 0;
 }
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index 36778b270c3..ed3510f273d 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -135,5 +135,3 @@ source "drivers/isdn/act2000/Kconfig"
 source "drivers/isdn/hysdn/Kconfig"
 
 endmenu
-
-source "drivers/isdn/gigaset/Kconfig"
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index cb8943da4f1..34d54e7281f 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1069,7 +1069,7 @@ isdn_net_xmit(struct net_device *ndev, struct sk_buff *skb)
 	lp = isdn_net_get_locked_lp(nd);
 	if (!lp) {
 		printk(KERN_WARNING "%s: all channels busy - requeuing!\n", ndev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	/* we have our lp locked from now on */
 
@@ -1273,14 +1273,14 @@ isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 					spin_unlock_irqrestore(&dev->lock, flags);
 					isdn_net_dial();	/* Initiate dialing */
 					netif_stop_queue(ndev);
-					return 1;	/* let upper layer requeue skb packet */
+					return NETDEV_TX_BUSY;	/* let upper layer requeue skb packet */
 				}
 #endif
 				/* Initiate dialing */
 				spin_unlock_irqrestore(&dev->lock, flags);
 				isdn_net_dial();
 				isdn_net_device_stop_queue(lp);
-				return 1;
+				return NETDEV_TX_BUSY;
 			} else {
 				isdn_net_unreachable(ndev, skb,
 						     "No phone number");
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 1a2222cbb80..b4d4522e507 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1592,7 +1592,7 @@ isdn_tty_open(struct tty_struct *tty, struct file *filp)
 	int retval, line;
 
 	line = tty->index;
-	if (line < 0 || line > ISDN_MAX_CHANNELS)
+	if (line < 0 || line >= ISDN_MAX_CHANNELS)
 		return -ENODEV;
 	info = &dev->mdm.info[line];
 	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
index 9426c9827e4..21d34be5af6 100644
--- a/drivers/isdn/mISDN/core.c
+++ b/drivers/isdn/mISDN/core.c
@@ -214,7 +214,7 @@ get_free_devid(void)
 		if (!test_and_set_bit(i, (u_long *)&device_ids))
 			break;
 	if (i > MAX_DEVICE_ID)
-		return -1;
+		return -EBUSY;
 	return i;
 }
 
@@ -224,10 +224,10 @@ mISDN_register_device(struct mISDNdevice *dev,
 {
 	int	err;
 
-	dev->id = get_free_devid();
-	err = -EBUSY;
-	if (dev->id < 0)
+	err = get_free_devid();
+	if (err < 0)
 		goto error1;
+	dev->id = err;
 
 	device_initialize(&dev->dev);
 	if (name && name[0])
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
index 98a33c58f09..18af86879c0 100644
--- a/drivers/isdn/mISDN/dsp.h
+++ b/drivers/isdn/mISDN/dsp.h
@@ -112,9 +112,11 @@ struct dsp_conf {
 
 #define DSP_DTMF_NPOINTS 102
 
-#define ECHOCAN_BUFLEN (4*128)
+#define ECHOCAN_BUFF_SIZE 0x400 /* must be 2**n */
+#define ECHOCAN_BUFF_MASK 0x3ff /* -1 */
 
 struct dsp_dtmf {
+	int		enable; /* dtmf is enabled */
 	int		treshold; /* above this is dtmf (square of) */
 	int		software; /* dtmf uses software decoding */
 	int		hardware; /* dtmf uses hardware decoding */
@@ -123,7 +125,7 @@ struct dsp_dtmf {
 		/* buffers one full dtmf frame */
 	u8		lastwhat, lastdigit;
 	int		count;
-	u8		digits[16]; /* just the dtmf result */
+	u8		digits[16]; /* dtmf result */
 };
 
 
@@ -150,6 +152,15 @@ struct dsp_tone {
 	struct timer_list tl;
 };
 
+/***************
+ * echo stuff *
+ ***************/
+
+struct dsp_echo {
+	int		software; /* echo is generated by software */
+	int		hardware; /* echo is generated by hardware */
+};
+
 /*****************
  * general stuff *
  *****************/
@@ -160,7 +171,7 @@ struct dsp {
 	struct mISDNchannel	*up;
 	unsigned char	name[64];
 	int		b_active;
-	int		echo; /* echo is enabled */
+	struct dsp_echo	echo;
 	int		rx_disabled; /* what the user wants */
 	int		rx_is_off; /* what the card is */
 	int		tx_mix;
@@ -261,5 +272,5 @@ extern int  dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg);
 extern void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data,
 		int len);
 extern void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data,
-		int len);
+		int len, unsigned int txlen);
 
diff --git a/drivers/isdn/mISDN/dsp_audio.c b/drivers/isdn/mISDN/dsp_audio.c
index de3795e3f43..9c7c6451bf3 100644
--- a/drivers/isdn/mISDN/dsp_audio.c
+++ b/drivers/isdn/mISDN/dsp_audio.c
@@ -210,9 +210,8 @@ dsp_audio_generate_seven(void)
 		j = 0;
 		for (k = 0; k < 256; k++) {
 			if (dsp_audio_alaw_to_s32[k]
-				< dsp_audio_alaw_to_s32[i]) {
-			j++;
-			}
+			    < dsp_audio_alaw_to_s32[i])
+				j++;
 		}
 		sorted_alaw[j] = i;
 	}
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 58c43e429f7..9c7c0d1ba55 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -163,8 +163,9 @@ dsp_cmx_debug(struct dsp *dsp)
 
 	printk(KERN_DEBUG "-----Current DSP\n");
 	list_for_each_entry(odsp, &dsp_ilist, list) {
-		printk(KERN_DEBUG "* %s echo=%d txmix=%d",
-		    odsp->name, odsp->echo, odsp->tx_mix);
+		printk(KERN_DEBUG "* %s hardecho=%d softecho=%d txmix=%d",
+		    odsp->name, odsp->echo.hardware, odsp->echo.software,
+		    odsp->tx_mix);
 		if (odsp->conf)
 			printk(" (Conf %d)", odsp->conf->id);
 		if (dsp == odsp)
@@ -177,10 +178,12 @@ dsp_cmx_debug(struct dsp *dsp)
 		list_for_each_entry(member, &conf->mlist, list) {
 			printk(KERN_DEBUG
 			    "  - member = %s (slot_tx %d, bank_tx %d, "
-			    "slot_rx %d, bank_rx %d hfc_conf %d)%s\n",
+			    "slot_rx %d, bank_rx %d hfc_conf %d "
+			    "tx_data %d rx_is_off %d)%s\n",
 			    member->dsp->name, member->dsp->pcm_slot_tx,
 			    member->dsp->pcm_bank_tx, member->dsp->pcm_slot_rx,
 			    member->dsp->pcm_bank_rx, member->dsp->hfc_conf,
+			    member->dsp->tx_data, member->dsp->rx_is_off,
 			    (member->dsp == dsp) ? " *this*" : "");
 		}
 	}
@@ -235,7 +238,7 @@ dsp_cmx_add_conf_member(struct dsp *dsp, struct dsp_conf *conf)
 
 	member = kzalloc(sizeof(struct dsp_conf_member), GFP_ATOMIC);
 	if (!member) {
-		printk(KERN_ERR "kmalloc struct dsp_conf_member failed\n");
+		printk(KERN_ERR "kzalloc struct dsp_conf_member failed\n");
 		return -ENOMEM;
 	}
 	member->dsp = dsp;
@@ -314,7 +317,7 @@ static struct dsp_conf
 
 	conf = kzalloc(sizeof(struct dsp_conf), GFP_ATOMIC);
 	if (!conf) {
-		printk(KERN_ERR "kmalloc struct dsp_conf failed\n");
+		printk(KERN_ERR "kzalloc struct dsp_conf failed\n");
 		return NULL;
 	}
 	INIT_LIST_HEAD(&conf->mlist);
@@ -385,7 +388,7 @@ dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp)
 	int		freeunits[8];
 	u_char		freeslots[256];
 	int		same_hfc = -1, same_pcm = -1, current_conf = -1,
-	    all_conf = 1;
+	    all_conf = 1, tx_data = 0;
 
 	/* dsp gets updated (no conf) */
 	if (!conf) {
@@ -409,7 +412,7 @@ one_member:
 		/* process hw echo */
 		if (dsp->features.pcm_banks < 1)
 			return;
-		if (!dsp->echo) {
+		if (!dsp->echo.software && !dsp->echo.hardware) {
 			/* NO ECHO: remove PCM slot if assigned */
 			if (dsp->pcm_slot_tx >= 0 || dsp->pcm_slot_rx >= 0) {
 				if (dsp_debug & DEBUG_DSP_CMX)
@@ -427,10 +430,15 @@ one_member:
 			}
 			return;
 		}
+		/* echo is enabled, find out if we use soft or hardware */
+		dsp->echo.software = dsp->tx_data;
+		dsp->echo.hardware = 0;
 		/* ECHO: already echo */
 		if (dsp->pcm_slot_tx >= 0 && dsp->pcm_slot_rx < 0 &&
-		    dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2)
+		    dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2) {
+			dsp->echo.hardware = 1;
 			return;
+		}
 		/* ECHO: if slot already assigned */
 		if (dsp->pcm_slot_tx >= 0) {
 			dsp->pcm_slot_rx = dsp->pcm_slot_tx;
@@ -443,6 +451,7 @@ one_member:
 				    dsp->pcm_slot_tx);
 			dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
 			    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+			dsp->echo.hardware = 1;
 			return;
 		}
 		/* ECHO: find slot */
@@ -472,6 +481,7 @@ one_member:
 				    "%s no slot available for echo\n",
 				    __func__);
 			/* no more slots available */
+			dsp->echo.software = 1;
 			return;
 		}
 		/* assign free slot */
@@ -485,6 +495,7 @@ one_member:
 			    __func__, dsp->name, dsp->pcm_slot_tx);
 		dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
 		    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+		dsp->echo.hardware = 1;
 		return;
 	}
 
@@ -554,7 +565,7 @@ conf_software:
 			return;
 		}
 		/* check if member has echo turned on */
-		if (member->dsp->echo) {
+		if (member->dsp->echo.hardware || member->dsp->echo.software) {
 			if (dsp_debug & DEBUG_DSP_CMX)
 				printk(KERN_DEBUG
 				    "%s dsp %s cannot form a conf, because "
@@ -592,10 +603,9 @@ conf_software:
 		if (member->dsp->tx_data) {
 			if (dsp_debug & DEBUG_DSP_CMX)
 				printk(KERN_DEBUG
-				    "%s dsp %s cannot form a conf, because "
-				    "tx_data is turned on\n",
+				    "%s dsp %s tx_data is turned on\n",
 				    __func__, member->dsp->name);
-			goto conf_software;
+			tx_data = 1;
 		}
 		/* check if pipeline exists */
 		if (member->dsp->pipeline.inuse) {
@@ -794,7 +804,7 @@ conf_software:
 			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
 			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
 			conf->hardware = 1;
-			conf->software = 0;
+			conf->software = tx_data;
 			return;
 		/* if members have one bank (or on the same chip) */
 		} else {
@@ -904,7 +914,7 @@ conf_software:
 			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
 			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
 			conf->hardware = 1;
-			conf->software = 0;
+			conf->software = tx_data;
 			return;
 		}
 	}
@@ -937,6 +947,10 @@ conf_software:
 	if (current_conf >= 0) {
 join_members:
 		list_for_each_entry(member, &conf->mlist, list) {
+			/* if no conference engine on our chip, change to
+			 * software */
+			if (!member->dsp->features.hfc_conf)
+				goto conf_software;
 			/* in case of hdlc, change to software */
 			if (member->dsp->hdlc)
 				goto conf_software;
@@ -1295,17 +1309,25 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 	int r, rr, t, tt, o_r, o_rr;
 	int preload = 0;
 	struct mISDNhead *hh, *thh;
+	int tx_data_only = 0;
 
 	/* don't process if: */
 	if (!dsp->b_active) { /* if not active */
 		dsp->last_tx = 0;
 		return;
 	}
-	if (dsp->pcm_slot_tx >= 0 && /* connected to pcm slot */
+	if (((dsp->conf && dsp->conf->hardware) || /* hardware conf */
+	    dsp->echo.hardware) && /* OR hardware echo */
 	    dsp->tx_R == dsp->tx_W && /* AND no tx-data */
 	    !(dsp->tone.tone && dsp->tone.software)) { /* AND not soft tones */
-		dsp->last_tx = 0;
-		return;
+		if (!dsp->tx_data) { /* no tx_data for user space required */
+			dsp->last_tx = 0;
+			return;
+		}
+		if (dsp->conf && dsp->conf->software && dsp->conf->hardware)
+			tx_data_only = 1;
+		if (dsp->conf->software && dsp->echo.hardware)
+			tx_data_only = 1;
 	}
 
 #ifdef CMX_DEBUG
@@ -1367,7 +1389,8 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 		while (r != rr && t != tt) {
 #ifdef CMX_TX_DEBUG
 			if (strlen(debugbuf) < 48)
-			    sprintf(debugbuf+strlen(debugbuf), " %02x", p[t]);
+				sprintf(debugbuf+strlen(debugbuf), " %02x",
+				    p[t]);
 #endif
 			*d++ = p[t]; /* write tx_buff */
 			t = (t+1) & CMX_BUFF_MASK;
@@ -1388,7 +1411,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 	/* PROCESS DATA (one member / no conf) */
 	if (!conf || members <= 1) {
 		/* -> if echo is NOT enabled */
-		if (!dsp->echo) {
+		if (!dsp->echo.software) {
 			/* -> send tx-data if available or use 0-volume */
 			while (r != rr && t != tt) {
 				*d++ = p[t]; /* write tx_buff */
@@ -1438,7 +1461,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 		o_r = (o_rr - rr + r) & CMX_BUFF_MASK;
 			/* start rx-pointer at current read position*/
 		/* -> if echo is NOT enabled */
-		if (!dsp->echo) {
+		if (!dsp->echo.software) {
 			/*
 			 * -> copy other member's rx-data,
 			 * if tx-data is available, mix
@@ -1486,7 +1509,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 #endif
 	/* PROCESS DATA (three or more members) */
 	/* -> if echo is NOT enabled */
-	if (!dsp->echo) {
+	if (!dsp->echo.software) {
 		/*
 		 * -> substract rx-data from conf-data,
 		 * if tx-data is available, mix
@@ -1550,27 +1573,40 @@ send_packet:
 	 * becuase we want what we send, not what we filtered
 	 */
 	if (dsp->tx_data) {
-		/* PREPARE RESULT */
-		txskb = mI_alloc_skb(len, GFP_ATOMIC);
-		if (!txskb) {
-			printk(KERN_ERR
-			    "FATAL ERROR in mISDN_dsp.o: "
-			    "cannot alloc %d bytes\n", len);
+		if (tx_data_only) {
+			hh->prim = DL_DATA_REQ;
+			hh->id = 0;
+			/* queue and trigger */
+			skb_queue_tail(&dsp->sendq, nskb);
+			schedule_work(&dsp->workq);
+			/* exit because only tx_data is used */
+			return;
 		} else {
-			thh = mISDN_HEAD_P(txskb);
-			thh->prim = DL_DATA_REQ;
-			thh->id = 0;
-			memcpy(skb_put(txskb, len), nskb->data+preload, len);
-			/* queue (trigger later) */
-			skb_queue_tail(&dsp->sendq, txskb);
+			txskb = mI_alloc_skb(len, GFP_ATOMIC);
+			if (!txskb) {
+				printk(KERN_ERR
+				    "FATAL ERROR in mISDN_dsp.o: "
+				    "cannot alloc %d bytes\n", len);
+			} else {
+				thh = mISDN_HEAD_P(txskb);
+				thh->prim = DL_DATA_REQ;
+				thh->id = 0;
+				memcpy(skb_put(txskb, len), nskb->data+preload,
+					len);
+				/* queue (trigger later) */
+				skb_queue_tail(&dsp->sendq, txskb);
+			}
 		}
 	}
+
+	/* send data only to card, if we don't just calculated tx_data */
 	/* adjust volume */
 	if (dsp->tx_volume)
 		dsp_change_volume(nskb, dsp->tx_volume);
 	/* pipeline */
 	if (dsp->pipeline.inuse)
-		dsp_pipeline_process_tx(&dsp->pipeline, nskb->data, nskb->len);
+		dsp_pipeline_process_tx(&dsp->pipeline, nskb->data,
+			nskb->len);
 	/* crypt */
 	if (dsp->bf_enable)
 		dsp_bf_encrypt(dsp, nskb->data, nskb->len);
@@ -1592,7 +1628,8 @@ dsp_cmx_send(void *arg)
 	struct dsp_conf_member *member;
 	struct dsp *dsp;
 	int mustmix, members;
-	s32 mixbuffer[MAX_POLL+100], *c;
+	static s32 mixbuffer[MAX_POLL+100];
+	s32 *c;
 	u8 *p, *q;
 	int r, rr;
 	int jittercheck = 0, delay, i;
@@ -1890,10 +1927,8 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
 
 	/* no conf */
 	if (!dsp->conf) {
-		/* in case of hardware (echo) */
-		if (dsp->pcm_slot_tx >= 0)
-			return;
-		if (dsp->echo) {
+		/* in case of software echo */
+		if (dsp->echo.software) {
 			nskb = skb_clone(skb, GFP_ATOMIC);
 			if (nskb) {
 				hh = mISDN_HEAD_P(nskb);
@@ -1909,7 +1944,7 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
 	if (dsp->conf->hardware)
 		return;
 	list_for_each_entry(member, &dsp->conf->mlist, list) {
-		if (dsp->echo || member->dsp != dsp) {
+		if (dsp->echo.software || member->dsp != dsp) {
 			nskb = skb_clone(skb, GFP_ATOMIC);
 			if (nskb) {
 				hh = mISDN_HEAD_P(nskb);
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 3083338716b..77ee2867c8b 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -203,13 +203,13 @@ dsp_rx_off_member(struct dsp *dsp)
 	else if (dsp->dtmf.software)
 		rx_off = 0;
 	/* echo in software */
-	else if (dsp->echo && dsp->pcm_slot_tx < 0)
+	else if (dsp->echo.software)
 		rx_off = 0;
 	/* bridge in software */
-	else if (dsp->conf) {
-		if (dsp->conf->software)
-			rx_off = 0;
-	}
+	else if (dsp->conf && dsp->conf->software)
+		rx_off = 0;
+	/* data is not required by user space and not required
+	 * for echo dtmf detection, soft-echo, soft-bridging */
 
 	if (rx_off == dsp->rx_is_off)
 		return;
@@ -280,7 +280,7 @@ dsp_fill_empty(struct dsp *dsp)
 static int
 dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
 {
-	struct		sk_buff *nskb;
+	struct sk_buff	*nskb;
 	int ret = 0;
 	int cont;
 	u8 *data;
@@ -306,15 +306,18 @@ dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
 					"to %d\n", *((int *)data));
 			dsp->dtmf.treshold = (*(int *)data) * 10000;
 		}
+		dsp->dtmf.enable = 1;
 		/* init goertzel */
 		dsp_dtmf_goertzel_init(dsp);
 
 		/* check dtmf hardware */
 		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
 		break;
 	case DTMF_TONE_STOP: /* turn off DTMF */
 		if (dsp_debug & DEBUG_DSP_CORE)
 			printk(KERN_DEBUG "%s: stop dtmf\n", __func__);
+		dsp->dtmf.enable = 0;
 		dsp->dtmf.hardware = 0;
 		dsp->dtmf.software = 0;
 		break;
@@ -414,7 +417,7 @@ tone_off:
 		dsp_rx_off(dsp);
 		break;
 	case DSP_ECHO_ON: /* enable echo */
-		dsp->echo = 1; /* soft echo */
+		dsp->echo.software = 1; /* soft echo */
 		if (dsp_debug & DEBUG_DSP_CORE)
 			printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__);
 		dsp_cmx_hardware(dsp->conf, dsp);
@@ -423,7 +426,8 @@ tone_off:
 			dsp_cmx_debug(dsp);
 		break;
 	case DSP_ECHO_OFF: /* disable echo */
-		dsp->echo = 0;
+		dsp->echo.software = 0;
+		dsp->echo.hardware = 0;
 		if (dsp_debug & DEBUG_DSP_CORE)
 			printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__);
 		dsp_cmx_hardware(dsp->conf, dsp);
@@ -502,7 +506,7 @@ tone_off:
 			break;
 		}
 		dsp->cmx_delay = (*((int *)data)) << 3;
-			/* miliseconds to samples */
+			/* milliseconds to samples */
 		if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
 			/* clip to half of maximum usable buffer
 			(half of half buffer) */
@@ -556,7 +560,7 @@ tone_off:
 			dsp->pipeline.inuse = 1;
 			dsp_cmx_hardware(dsp->conf, dsp);
 			ret = dsp_pipeline_build(&dsp->pipeline,
-				len > 0 ? (char *)data : NULL);
+				len > 0 ? data : NULL);
 			dsp_cmx_hardware(dsp->conf, dsp);
 			dsp_rx_off(dsp);
 		}
@@ -657,11 +661,10 @@ get_features(struct mISDNchannel *ch)
 static int
 dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 {
-	struct dsp			*dsp = container_of(ch, struct dsp, ch);
+	struct dsp		*dsp = container_of(ch, struct dsp, ch);
 	struct mISDNhead	*hh;
 	int			ret = 0;
-	u8			*digits;
-	int			cont;
+	u8			*digits = NULL;
 	u_long			flags;
 
 	hh = mISDN_HEAD_P(skb);
@@ -704,50 +707,55 @@ dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 			break;
 		}
 
+		spin_lock_irqsave(&dsp_lock, flags);
+
 		/* decrypt if enabled */
 		if (dsp->bf_enable)
 			dsp_bf_decrypt(dsp, skb->data, skb->len);
 		/* pipeline */
 		if (dsp->pipeline.inuse)
 			dsp_pipeline_process_rx(&dsp->pipeline, skb->data,
-				skb->len);
+				skb->len, hh->id);
 		/* change volume if requested */
 		if (dsp->rx_volume)
 			dsp_change_volume(skb, dsp->rx_volume);
-
 		/* check if dtmf soft decoding is turned on */
 		if (dsp->dtmf.software) {
 			digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
-				skb->len, (dsp_options&DSP_OPT_ULAW)?1:0);
+				skb->len, (dsp_options&DSP_OPT_ULAW) ? 1 : 0);
+		}
+		/* we need to process receive data if software */
+		if (dsp->conf && dsp->conf->software) {
+			/* process data from card at cmx */
+			dsp_cmx_receive(dsp, skb);
+		}
+
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		/* send dtmf result, if any */
+		if (digits) {
 			while (*digits) {
+				int k;
 				struct sk_buff *nskb;
 				if (dsp_debug & DEBUG_DSP_DTMF)
 					printk(KERN_DEBUG "%s: digit"
 					    "(%c) to layer %s\n",
 					    __func__, *digits, dsp->name);
-				cont = DTMF_TONE_VAL | *digits;
+				k = *digits | DTMF_TONE_VAL;
 				nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
-				    MISDN_ID_ANY, sizeof(int), &cont,
-				    GFP_ATOMIC);
+					MISDN_ID_ANY, sizeof(int), &k,
+					GFP_ATOMIC);
 				if (nskb) {
 					if (dsp->up) {
 						if (dsp->up->send(
 						    dsp->up, nskb))
-						dev_kfree_skb(nskb);
+							dev_kfree_skb(nskb);
 					} else
 						dev_kfree_skb(nskb);
 				}
 				digits++;
 			}
 		}
-		/* we need to process receive data if software */
-		spin_lock_irqsave(&dsp_lock, flags);
-		if (dsp->pcm_slot_tx < 0 && dsp->pcm_slot_rx < 0) {
-			/* process data from card at cmx */
-			dsp_cmx_receive(dsp, skb);
-		}
-		spin_unlock_irqrestore(&dsp_lock, flags);
-
 		if (dsp->rx_disabled) {
 			/* if receive is not allowed */
 			break;
@@ -787,7 +795,7 @@ dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 					if (dsp->up) {
 						if (dsp->up->send(
 						    dsp->up, nskb))
-						dev_kfree_skb(nskb);
+							dev_kfree_skb(nskb);
 					} else
 						dev_kfree_skb(nskb);
 				}
@@ -946,7 +954,7 @@ dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 	int		err = 0;
 
 	if (debug & DEBUG_DSP_CTRL)
-	printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
+		printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
 
 	switch (cmd) {
 	case OPEN_CHANNEL:
@@ -1169,9 +1177,9 @@ static int dsp_init(void)
 
 	/* init conversion tables */
 	dsp_audio_generate_law_tables();
-	dsp_silence = (dsp_options&DSP_OPT_ULAW)?0xff:0x2a;
-	dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW)?dsp_audio_ulaw_to_s32:
-		dsp_audio_alaw_to_s32;
+	dsp_silence = (dsp_options&DSP_OPT_ULAW) ? 0xff : 0x2a;
+	dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW) ?
+		dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32;
 	dsp_audio_generate_s2law_table();
 	dsp_audio_generate_seven();
 	dsp_audio_generate_mix_table();
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
index efc371c1f0d..9ae2d33b06f 100644
--- a/drivers/isdn/mISDN/dsp_dtmf.c
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -51,6 +51,9 @@ void dsp_dtmf_hardware(struct dsp *dsp)
 {
 	int hardware = 1;
 
+	if (!dsp->dtmf.enable)
+		return;
+
 	if (!dsp->features.hfc_dtmf)
 		hardware = 0;
 
diff --git a/drivers/isdn/mISDN/dsp_ecdis.h b/drivers/isdn/mISDN/dsp_ecdis.h
index 8a20af43308..21dbd153ee2 100644
--- a/drivers/isdn/mISDN/dsp_ecdis.h
+++ b/drivers/isdn/mISDN/dsp_ecdis.h
@@ -91,7 +91,7 @@ int16_t amp)
 					&& det->tone_cycle_duration <= 475*8) {
 					det->good_cycles++;
 					if (det->good_cycles > 2)
-					det->hit = TRUE;
+						det->hit = TRUE;
 				}
 				det->tone_cycle_duration = 0;
 			}
diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index 18cf87c113e..e9941678edf 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -55,20 +55,19 @@ static ssize_t
 attr_show_args(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct mISDN_dsp_element *elem = dev_get_drvdata(dev);
-	ssize_t len = 0;
-	int i = 0;
+	int i;
+	char *p = buf;
 
 	*buf = 0;
-	for (; i < elem->num_args; ++i)
-		len = sprintf(buf, "%sName:        %s\n%s%s%sDescription: %s\n"
-			"\n", buf,
+	for (i = 0; i < elem->num_args; i++)
+		p += sprintf(p, "Name:        %s\n%s%s%sDescription: %s\n\n",
 			  elem->args[i].name,
 			  elem->args[i].def ? "Default:     " : "",
 			  elem->args[i].def ? elem->args[i].def : "",
 			  elem->args[i].def ? "\n" : "",
 			  elem->args[i].desc);
 
-	return len;
+	return p - buf;
 }
 
 static struct device_attribute element_attributes[] = {
@@ -347,7 +346,8 @@ void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data, int len)
 			entry->elem->process_tx(entry->p, data, len);
 }
 
-void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len)
+void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len,
+	unsigned int txlen)
 {
 	struct dsp_pipeline_entry *entry;
 
@@ -356,7 +356,7 @@ void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len)
 
 	list_for_each_entry_reverse(entry, &pipeline->list, list)
 		if (entry->elem->process_rx)
-			entry->elem->process_rx(entry->p, data, len);
+			entry->elem->process_rx(entry->p, data, len, txlen);
 }
 
 
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
index 7a9af66f4b1..1debf53670d 100644
--- a/drivers/isdn/mISDN/dsp_tones.c
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -253,18 +253,24 @@ static struct pattern {
 	{8000, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
 
 	{TONE_GERMAN_DIALPBX,
-	{DATA_GA, DATA_S, DATA_GA, DATA_S, DATA_GA, DATA_S, NULL, NULL, NULL, NULL},
-	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, NULL, NULL, NULL, NULL},
+	{DATA_GA, DATA_S, DATA_GA, DATA_S, DATA_GA, DATA_S, NULL, NULL, NULL,
+		NULL},
+	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, NULL, NULL, NULL,
+		NULL},
 	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
 
 	{TONE_GERMAN_OLDDIALPBX,
-	{DATA_GO, DATA_S, DATA_GO, DATA_S, DATA_GO, DATA_S, NULL, NULL, NULL, NULL},
-	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, NULL, NULL, NULL, NULL},
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, DATA_GO, DATA_S, NULL, NULL, NULL,
+		NULL},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, NULL, NULL, NULL,
+		NULL},
 	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
 
 	{TONE_AMERICAN_DIALPBX,
-	{DATA_DT, DATA_S, DATA_DT, DATA_S, DATA_DT, DATA_S, NULL, NULL, NULL, NULL},
-	{SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, NULL, NULL, NULL, NULL},
+	{DATA_DT, DATA_S, DATA_DT, DATA_S, DATA_DT, DATA_S, NULL, NULL, NULL,
+		NULL},
+	{SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, NULL, NULL, NULL,
+		NULL},
 	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
 
 	{TONE_GERMAN_RINGING,
@@ -434,7 +440,7 @@ dsp_tone_hw_message(struct dsp *dsp, u8 *sample, int len)
 
 	/* unlocking is not required, because we don't expect a response */
 	nskb = _alloc_mISDN_skb(PH_CONTROL_REQ,
-		(len)?HFC_SPL_LOOP_ON:HFC_SPL_LOOP_OFF, len, sample,
+		(len) ? HFC_SPL_LOOP_ON : HFC_SPL_LOOP_OFF, len, sample,
 		GFP_ATOMIC);
 	if (nskb) {
 		if (dsp->ch.peer) {
@@ -498,8 +504,7 @@ dsp_tone(struct dsp *dsp, int tone)
 
 	/* we turn off the tone */
 	if (!tone) {
-		if (dsp->features.hfc_loops)
-		if (timer_pending(&tonet->tl))
+		if (dsp->features.hfc_loops && timer_pending(&tonet->tl))
 			del_timer(&tonet->tl);
 		if (dsp->features.hfc_loops)
 			dsp_tone_hw_message(dsp, NULL, 0);
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
index ab1168a110a..0481a0cdf6d 100644
--- a/drivers/isdn/mISDN/hwchannel.c
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -185,13 +185,13 @@ recv_Echannel(struct dchannel *ech, struct dchannel *dch)
 EXPORT_SYMBOL(recv_Echannel);
 
 void
-recv_Bchannel(struct bchannel *bch)
+recv_Bchannel(struct bchannel *bch, unsigned int id)
 {
 	struct mISDNhead *hh;
 
 	hh = mISDN_HEAD_P(bch->rx_skb);
 	hh->prim = PH_DATA_IND;
-	hh->id = MISDN_ID_ANY;
+	hh->id = id;
 	if (bch->rcount >= 64) {
 		printk(KERN_WARNING "B-channel %p receive queue overflow, "
 			"fushing!\n", bch);
diff --git a/drivers/isdn/mISDN/l1oip.h b/drivers/isdn/mISDN/l1oip.h
index a23d575449f..bc26c890d9a 100644
--- a/drivers/isdn/mISDN/l1oip.h
+++ b/drivers/isdn/mISDN/l1oip.h
@@ -76,7 +76,7 @@ struct l1oip {
 	struct sockaddr_in	sin_local;	/* local socket name */
 	struct sockaddr_in	sin_remote;	/* remote socket name */
 	struct msghdr		sendmsg;	/* ip message to send */
-	struct iovec		sendiov;	/* iov for message */
+	struct kvec		sendiov;	/* iov for message */
 
 	/* frame */
 	struct l1oip_chan	chan[128];	/* channel instances */
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
index e4ecba3d48d..bbfd1b863ed 100644
--- a/drivers/isdn/mISDN/l1oip_codec.c
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -48,6 +48,7 @@ NOTE: The bytes are handled as they are law-encoded.
 
 #include <linux/vmalloc.h>
 #include <linux/mISDNif.h>
+#include <linux/in.h>
 #include "core.h"
 #include "l1oip.h"
 
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index abe57498957..990e6a7e667 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -279,7 +279,6 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 	int multi = 0;
 	u8 frame[len+32];
 	struct socket *socket = NULL;
-	mm_segment_t oldfs;
 
 	if (debug & DEBUG_L1OIP_MSG)
 		printk(KERN_DEBUG "%s: sending data to socket (len = %d)\n",
@@ -308,8 +307,8 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 
 	/* assemble frame */
 	*p++ = (L1OIP_VERSION<<6) /* version and coding */
-	     | (hc->pri?0x20:0x00) /* type */
-	     | (hc->id?0x10:0x00) /* id */
+	     | (hc->pri ? 0x20 : 0x00) /* type */
+	     | (hc->id ? 0x10 : 0x00) /* id */
 	     | localcodec;
 	if (hc->id) {
 		*p++ = hc->id>>24; /* id */
@@ -317,7 +316,7 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 		*p++ = hc->id>>8;
 		*p++ = hc->id;
 	}
-	*p++ = (multi == 1)?0x80:0x00 + channel; /* m-flag, channel */
+	*p++ = (multi == 1) ? 0x80 : 0x00 + channel; /* m-flag, channel */
 	if (multi == 1)
 		*p++ = len; /* length */
 	*p++ = timebase>>8; /* time base */
@@ -352,10 +351,7 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 			"= %d)\n", __func__, len);
 	hc->sendiov.iov_base = frame;
 	hc->sendiov.iov_len  = len;
-	oldfs = get_fs();
-	set_fs(KERNEL_DS);
-	len = sock_sendmsg(socket, &hc->sendmsg, len);
-	set_fs(oldfs);
+	len = kernel_sendmsg(socket, &hc->sendmsg, &hc->sendiov, 1, len);
 	/* give socket back */
 	hc->socket = socket; /* no locking required */
 
@@ -401,12 +397,12 @@ l1oip_socket_recv(struct l1oip *hc, u8 remotecodec, u8 channel, u16 timebase,
 	}
 
 	/* prepare message */
-	nskb = mI_alloc_skb((remotecodec == 3)?(len<<1):len, GFP_ATOMIC);
+	nskb = mI_alloc_skb((remotecodec == 3) ? (len<<1) : len, GFP_ATOMIC);
 	if (!nskb) {
 		printk(KERN_ERR "%s: No mem for skb.\n", __func__);
 		return;
 	}
-	p = skb_put(nskb, (remotecodec == 3)?(len<<1):len);
+	p = skb_put(nskb, (remotecodec == 3) ? (len<<1) : len);
 
 	if (remotecodec == 1 && ulaw)
 		l1oip_alaw_to_ulaw(buf, len, p);
@@ -458,7 +454,7 @@ l1oip_socket_recv(struct l1oip *hc, u8 remotecodec, u8 channel, u16 timebase,
 		hc->chan[channel].disorder_flag ^= 1;
 		if (nskb)
 #endif
-		queue_ch_frame(&bch->ch, PH_DATA_IND, rx_counter, nskb);
+			queue_ch_frame(&bch->ch, PH_DATA_IND, rx_counter, nskb);
 	}
 }
 
@@ -660,21 +656,29 @@ l1oip_socket_thread(void *data)
 	struct l1oip *hc = (struct l1oip *)data;
 	int ret = 0;
 	struct msghdr msg;
-	struct iovec iov;
-	mm_segment_t oldfs;
 	struct sockaddr_in sin_rx;
-	unsigned char recvbuf[1500];
+	unsigned char *recvbuf;
+	size_t recvbuf_size = 1500;
 	int recvlen;
 	struct socket *socket = NULL;
 	DECLARE_COMPLETION(wait);
 
+	/* allocate buffer memory */
+	recvbuf = kmalloc(recvbuf_size, GFP_KERNEL);
+	if (!recvbuf) {
+		printk(KERN_ERR "%s: Failed to alloc recvbuf.\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
 	/* make daemon */
 	allow_signal(SIGTERM);
 
 	/* create socket */
 	if (sock_create(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &socket)) {
 		printk(KERN_ERR "%s: Failed to create socket.\n", __func__);
-		return -EIO;
+		ret = -EIO;
+		goto fail;
 	}
 
 	/* set incoming address */
@@ -708,16 +712,12 @@ l1oip_socket_thread(void *data)
 	msg.msg_namelen = sizeof(sin_rx);
 	msg.msg_control = NULL;
 	msg.msg_controllen = 0;
-	msg.msg_iov = &iov;
-	msg.msg_iovlen = 1;
 
 	/* build send message */
 	hc->sendmsg.msg_name = &hc->sin_remote;
 	hc->sendmsg.msg_namelen = sizeof(hc->sin_remote);
 	hc->sendmsg.msg_control = NULL;
 	hc->sendmsg.msg_controllen = 0;
-	hc->sendmsg.msg_iov    = &hc->sendiov;
-	hc->sendmsg.msg_iovlen = 1;
 
 	/* give away socket */
 	spin_lock(&hc->socket_lock);
@@ -729,18 +729,18 @@ l1oip_socket_thread(void *data)
 		printk(KERN_DEBUG "%s: socket created and open\n",
 			__func__);
 	while (!signal_pending(current)) {
-		iov.iov_base = recvbuf;
-		iov.iov_len = sizeof(recvbuf);
-		oldfs = get_fs();
-		set_fs(KERNEL_DS);
-		recvlen = sock_recvmsg(socket, &msg, sizeof(recvbuf), 0);
-		set_fs(oldfs);
+		struct kvec iov = {
+			.iov_base = recvbuf,
+			.iov_len = sizeof(recvbuf),
+		};
+		recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
+					 sizeof(recvbuf), 0);
 		if (recvlen > 0) {
 			l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
 		} else {
 			if (debug & DEBUG_L1OIP_SOCKET)
-			    printk(KERN_WARNING "%s: broken pipe on socket\n",
-				__func__);
+				printk(KERN_WARNING
+				    "%s: broken pipe on socket\n", __func__);
 		}
 	}
 
@@ -760,6 +760,9 @@ l1oip_socket_thread(void *data)
 			__func__);
 
 fail:
+	/* free recvbuf */
+	kfree(recvbuf);
+
 	/* close socket */
 	if (socket)
 		sock_release(socket);
@@ -912,7 +915,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 		p = skb->data;
 		l = skb->len;
 		while (l) {
-			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			ll = (l < L1OIP_MAX_PERFRAME) ? l : L1OIP_MAX_PERFRAME;
 			l1oip_socket_send(hc, 0, dch->slot, 0,
 				hc->chan[dch->slot].tx_counter++, p, ll);
 			p += ll;
@@ -1160,7 +1163,7 @@ handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 		p = skb->data;
 		l = skb->len;
 		while (l) {
-			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			ll = (l < L1OIP_MAX_PERFRAME) ? l : L1OIP_MAX_PERFRAME;
 			l1oip_socket_send(hc, hc->codec, bch->slot, 0,
 				hc->chan[bch->slot].tx_counter, p, ll);
 			hc->chan[bch->slot].tx_counter += ll;
@@ -1318,8 +1321,8 @@ init_card(struct l1oip *hc, int pri, int bundle)
 	spin_lock_init(&hc->socket_lock);
 	hc->idx = l1oip_cnt;
 	hc->pri = pri;
-	hc->d_idx = pri?16:3;
-	hc->b_num = pri?30:2;
+	hc->d_idx = pri ? 16 : 3;
+	hc->b_num = pri ? 30 : 2;
 	hc->bundle = bundle;
 	if (hc->pri)
 		sprintf(hc->name, "l1oip-e1.%d", l1oip_cnt + 1);
@@ -1504,9 +1507,9 @@ l1oip_init(void)
 
 		if (debug & DEBUG_L1OIP_INIT)
 			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
-				__func__, l1oip_cnt, pri?"PRI":"BRI",
-				bundle?"bundled IP packet for all B-channels"
-				 :"seperate IP packets for every B-channel");
+			    __func__, l1oip_cnt, pri ? "PRI" : "BRI",
+			    bundle ? "bundled IP packet for all B-channels" :
+			    "seperate IP packets for every B-channel");
 
 		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
 		if (!hc) {
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index d6e2863f224..9c2589e986d 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -99,7 +99,7 @@ l2m_debug(struct FsmInst *fi, char *fmt, ...)
 	if (!(*debug & DEBUG_L2_FSM))
 		return;
 	va_start(va, fmt);
-	printk(KERN_DEBUG "l2 (tei %d): ", l2->tei);
+	printk(KERN_DEBUG "l2 (sapi %d tei %d): ", l2->sapi, l2->tei);
 	vprintk(fmt, va);
 	printk("\n");
 	va_end(va);
@@ -1859,20 +1859,18 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
 		psapi >>= 2;
 		ptei >>= 1;
 		if (psapi != l2->sapi) {
-			/* not our bussiness
-			 * printk(KERN_DEBUG "%s: sapi %d/%d sapi mismatch\n",
-			 *  __func__,
-			 *	psapi, l2->sapi);
-			 */
+			/* not our bussiness */
+			if (*debug & DEBUG_L2)
+				printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n",
+					__func__, psapi, l2->sapi);
 			dev_kfree_skb(skb);
 			return 0;
 		}
 		if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
-			/* not our bussiness
-			 * printk(KERN_DEBUG "%s: tei %d/%d sapi %d mismatch\n",
-			 *  __func__,
-			 *	ptei, l2->tei, psapi);
-			 */
+			/* not our bussiness */
+			if (*debug & DEBUG_L2)
+				printk(KERN_DEBUG "%s: tei %d/%d mismatch\n",
+					__func__, ptei, l2->tei);
 			dev_kfree_skb(skb);
 			return 0;
 		}
@@ -1927,8 +1925,8 @@ l2_send(struct mISDNchannel *ch, struct sk_buff *skb)
 	int 			ret = -EINVAL;
 
 	if (*debug & DEBUG_L2_RECV)
-		printk(KERN_DEBUG "%s: prim(%x) id(%x) tei(%d)\n",
-		    __func__, hh->prim, hh->id, l2->tei);
+		printk(KERN_DEBUG "%s: prim(%x) id(%x) sapi(%d) tei(%d)\n",
+		    __func__, hh->prim, hh->id, l2->sapi, l2->tei);
 	switch (hh->prim) {
 	case PH_DATA_IND:
 		ret = ph_data_indication(l2, hh, skb);
@@ -2068,7 +2066,8 @@ l2_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 }
 
 struct layer2 *
-create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
+create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, int tei,
+		int sapi)
 {
 	struct layer2		*l2;
 	struct channel_req	rq;
@@ -2089,7 +2088,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 		test_and_set_bit(FLG_LAPD, &l2->flag);
 		test_and_set_bit(FLG_LAPD_NET, &l2->flag);
 		test_and_set_bit(FLG_MOD128, &l2->flag);
-		l2->sapi = 0;
+		l2->sapi = sapi;
 		l2->maxlen = MAX_DFRAME_LEN;
 		if (test_bit(OPTION_L2_PMX, &options))
 			l2->window = 7;
@@ -2099,7 +2098,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 			test_and_set_bit(FLG_PTP, &l2->flag);
 		if (test_bit(OPTION_L2_FIXEDTEI, &options))
 			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
-		l2->tei = (u_int)arg;
+		l2->tei = tei;
 		l2->T200 = 1000;
 		l2->N200 = 3;
 		l2->T203 = 10000;
@@ -2114,7 +2113,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 		test_and_set_bit(FLG_LAPD, &l2->flag);
 		test_and_set_bit(FLG_MOD128, &l2->flag);
 		test_and_set_bit(FLG_ORIG, &l2->flag);
-		l2->sapi = 0;
+		l2->sapi = sapi;
 		l2->maxlen = MAX_DFRAME_LEN;
 		if (test_bit(OPTION_L2_PMX, &options))
 			l2->window = 7;
@@ -2124,7 +2123,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 			test_and_set_bit(FLG_PTP, &l2->flag);
 		if (test_bit(OPTION_L2_FIXEDTEI, &options))
 			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
-		l2->tei = (u_int)arg;
+		l2->tei = tei;
 		l2->T200 = 1000;
 		l2->N200 = 3;
 		l2->T203 = 10000;
@@ -2180,7 +2179,7 @@ x75create(struct channel_req *crq)
 
 	if (crq->protocol != ISDN_P_B_X75SLP)
 		return -EPROTONOSUPPORT;
-	l2 = create_l2(crq->ch, crq->protocol, 0, 0);
+	l2 = create_l2(crq->ch, crq->protocol, 0, 0, 0);
 	if (!l2)
 		return -ENOMEM;
 	crq->ch = &l2->ch;
diff --git a/drivers/isdn/mISDN/layer2.h b/drivers/isdn/mISDN/layer2.h
index 6293f80dc2d..9547fb3707a 100644
--- a/drivers/isdn/mISDN/layer2.h
+++ b/drivers/isdn/mISDN/layer2.h
@@ -90,7 +90,7 @@ enum {
 #define L2_STATE_COUNT (ST_L2_8+1)
 
 extern struct layer2	*create_l2(struct mISDNchannel *, u_int,
-				u_long, u_long);
+				u_long, int, int);
 extern int		tei_l2(struct layer2 *, u_int, u_long arg);
 
 
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 508945d1b9c..c36f5213745 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -209,7 +209,7 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
 		err = -EFAULT;
-		goto drop;
+		goto done;
 	}
 
 	memcpy(mISDN_HEAD_P(skb), skb->data, MISDN_HEADER_LEN);
@@ -222,7 +222,7 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	} else { /* use default for L2 messages */
 		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
 		    (sk->sk_protocol == ISDN_P_LAPD_NT))
-		    mISDN_HEAD_ID(skb) = _pms(sk)->ch.nr;
+			mISDN_HEAD_ID(skb) = _pms(sk)->ch.nr;
 	}
 
 	if (*debug & DEBUG_SOCKET)
@@ -230,19 +230,21 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 		     __func__, mISDN_HEAD_ID(skb));
 
 	err = -ENODEV;
-	if (!_pms(sk)->ch.peer ||
-	    (err = _pms(sk)->ch.recv(_pms(sk)->ch.peer, skb)))
-		goto drop;
-
-	err = len;
+	if (!_pms(sk)->ch.peer)
+		goto done;
+	err = _pms(sk)->ch.recv(_pms(sk)->ch.peer, skb);
+	if (err)
+		goto done;
+	else {
+		skb = NULL;
+		err = len;
+	}
 
 done:
+	if (skb)
+		kfree_skb(skb);
 	release_sock(sk);
 	return err;
-
-drop:
-	kfree_skb(skb);
-	goto done;
 }
 
 static int
@@ -292,7 +294,7 @@ static int
 data_sock_ioctl_bound(struct sock *sk, unsigned int cmd, void __user *p)
 {
 	struct mISDN_ctrl_req	cq;
-	int			err = -EINVAL, val;
+	int			err = -EINVAL, val[2];
 	struct mISDNchannel	*bchan, *next;
 
 	lock_sock(sk);
@@ -328,12 +330,27 @@ data_sock_ioctl_bound(struct sock *sk, unsigned int cmd, void __user *p)
 			err = -EINVAL;
 			break;
 		}
-		if (get_user(val, (int __user *)p)) {
+		val[0] = cmd;
+		if (get_user(val[1], (int __user *)p)) {
+			err = -EFAULT;
+			break;
+		}
+		err = _pms(sk)->dev->teimgr->ctrl(_pms(sk)->dev->teimgr,
+		    CONTROL_CHANNEL, val);
+		break;
+	case IMHOLD_L1:
+		if (sk->sk_protocol != ISDN_P_LAPD_NT
+		 && sk->sk_protocol != ISDN_P_LAPD_TE) {
+			err = -EINVAL;
+			break;
+		}
+		val[0] = cmd;
+		if (get_user(val[1], (int __user *)p)) {
 			err = -EFAULT;
 			break;
 		}
 		err = _pms(sk)->dev->teimgr->ctrl(_pms(sk)->dev->teimgr,
-		    CONTROL_CHANNEL, &val);
+		    CONTROL_CHANNEL, val);
 		break;
 	default:
 		err = -EINVAL;
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index b452dead8fd..e04bad6c5ba 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -122,8 +122,11 @@ da_deactivate(struct FsmInst *fi, int event, void *arg)
 	}
 	read_unlock_irqrestore(&mgr->lock, flags);
 	/* All TEI are inactiv */
-	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 1);
-	mISDN_FsmChangeState(fi, ST_L1_DEACT_PENDING);
+	if (!test_bit(OPTION_L1_HOLD, &mgr->options)) {
+		mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER,
+			NULL, 1);
+		mISDN_FsmChangeState(fi, ST_L1_DEACT_PENDING);
+	}
 }
 
 static void
@@ -132,9 +135,11 @@ da_ui(struct FsmInst *fi, int event, void *arg)
 	struct manager	*mgr = fi->userdata;
 
 	/* restart da timer */
-	mISDN_FsmDelTimer(&mgr->datimer, 2);
-	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 2);
-
+	if (!test_bit(OPTION_L1_HOLD, &mgr->options)) {
+		mISDN_FsmDelTimer(&mgr->datimer, 2);
+		mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER,
+			NULL, 2);
+	}
 }
 
 static void
@@ -222,7 +227,7 @@ tei_debug(struct FsmInst *fi, char *fmt, ...)
 	if (!(*debug & DEBUG_L2_TEIFSM))
 		return;
 	va_start(va, fmt);
-	printk(KERN_DEBUG "tei(%d): ", tm->l2->tei);
+	printk(KERN_DEBUG "sapi(%d) tei(%d): ", tm->l2->sapi, tm->l2->tei);
 	vprintk(fmt, va);
 	printk("\n");
 	va_end(va);
@@ -421,7 +426,7 @@ done:
 }
 
 static void
-put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, u_char tei)
+put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, int tei)
 {
 	struct sk_buff *skb;
 	u_char bp[8];
@@ -435,9 +440,8 @@ put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, u_char tei)
 	bp[4] = ri >> 8;
 	bp[5] = ri & 0xff;
 	bp[6] = m_id;
-	bp[7] = (tei << 1) | 1;
-	skb = _alloc_mISDN_skb(PH_DATA_REQ, new_id(mgr),
-	    8, bp, GFP_ATOMIC);
+	bp[7] = ((tei << 1) & 0xff) | 1;
+	skb = _alloc_mISDN_skb(PH_DATA_REQ, new_id(mgr), 8, bp, GFP_ATOMIC);
 	if (!skb) {
 		printk(KERN_WARNING "%s: no skb for tei msg\n", __func__);
 		return;
@@ -772,7 +776,7 @@ tei_ph_data_ind(struct teimgr *tm, u_int mt, u_char *dp, int len)
 }
 
 static struct layer2 *
-create_new_tei(struct manager *mgr, int tei)
+create_new_tei(struct manager *mgr, int tei, int sapi)
 {
 	u_long		opt = 0;
 	u_long		flags;
@@ -781,12 +785,12 @@ create_new_tei(struct manager *mgr, int tei)
 
 	if (!mgr->up)
 		return NULL;
-	if (tei < 64)
+	if ((tei >= 0) && (tei < 64))
 		test_and_set_bit(OPTION_L2_FIXEDTEI, &opt);
 	if (mgr->ch.st->dev->Dprotocols
 	  & ((1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1)))
 		test_and_set_bit(OPTION_L2_PMX, &opt);
-	l2 = create_l2(mgr->up, ISDN_P_LAPD_NT, (u_int)opt, (u_long)tei);
+	l2 = create_l2(mgr->up, ISDN_P_LAPD_NT, opt, tei, sapi);
 	if (!l2) {
 		printk(KERN_WARNING "%s:no memory for layer2\n", __func__);
 		return NULL;
@@ -834,12 +838,17 @@ new_tei_req(struct manager *mgr, u_char *dp)
 	ri += dp[1];
 	if (!mgr->up)
 		goto denied;
-	tei = get_free_tei(mgr);
+	if (!(dp[3] & 1)) /* Extension bit != 1 */
+		goto denied;
+	if (dp[3] != 0xff)
+		tei = dp[3] >> 1; /* 3GPP TS 08.56 6.1.11.2 */
+	else
+		tei = get_free_tei(mgr);
 	if (tei < 0) {
 		printk(KERN_WARNING "%s:No free tei\n", __func__);
 		goto denied;
 	}
-	l2 = create_new_tei(mgr, tei);
+	l2 = create_new_tei(mgr, tei, CTRL_SAPI);
 	if (!l2)
 		goto denied;
 	else
@@ -853,8 +862,7 @@ static int
 ph_data_ind(struct manager *mgr, struct sk_buff *skb)
 {
 	int		ret = -EINVAL;
-	struct layer2	*l2;
-	u_long		flags;
+	struct layer2	*l2, *nl2;
 	u_char		mt;
 
 	if (skb->len < 8) {
@@ -863,7 +871,6 @@ ph_data_ind(struct manager *mgr, struct sk_buff *skb)
 			    __func__, skb->len);
 		goto done;
 	}
-	if (*debug  & DEBUG_L2_TEI)
 
 	if ((skb->data[0] >> 2) != TEI_SAPI) /* not for us */
 		goto done;
@@ -900,11 +907,9 @@ ph_data_ind(struct manager *mgr, struct sk_buff *skb)
 		new_tei_req(mgr, &skb->data[4]);
 		goto done;
 	}
-	read_lock_irqsave(&mgr->lock, flags);
-	list_for_each_entry(l2, &mgr->layer2, list) {
+	list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
 		tei_ph_data_ind(l2->tm, mt, &skb->data[4], skb->len - 4);
 	}
-	read_unlock_irqrestore(&mgr->lock, flags);
 done:
 	return ret;
 }
@@ -971,8 +976,6 @@ create_teimgr(struct manager *mgr, struct channel_req *crq)
 			__func__, dev_name(&mgr->ch.st->dev->dev),
 			crq->protocol, crq->adr.dev, crq->adr.channel,
 			crq->adr.sapi, crq->adr.tei);
-	if (crq->adr.sapi != 0) /* not supported yet */
-		return -EINVAL;
 	if (crq->adr.tei > GROUP_TEI)
 		return -EINVAL;
 	if (crq->adr.tei < 64)
@@ -1019,8 +1022,8 @@ create_teimgr(struct manager *mgr, struct channel_req *crq)
 		}
 		return 0;
 	}
-	l2 = create_l2(crq->ch, crq->protocol, (u_int)opt,
-		(u_long)crq->adr.tei);
+	l2 = create_l2(crq->ch, crq->protocol, opt,
+		crq->adr.tei, crq->adr.sapi);
 	if (!l2)
 		return -ENOMEM;
 	l2->tm = kzalloc(sizeof(struct teimgr), GFP_KERNEL);
@@ -1103,6 +1106,7 @@ free_teimanager(struct manager *mgr)
 {
 	struct layer2	*l2, *nl2;
 
+	test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
 	if (test_bit(MGR_OPT_NETWORK, &mgr->options)) {
 		/* not locked lock is taken in release tei */
 		mgr->up = NULL;
@@ -1133,13 +1137,26 @@ static int
 ctrl_teimanager(struct manager *mgr, void *arg)
 {
 	/* currently we only have one option */
-	int	clean = *((int *)arg);
-
-	if (clean)
-		test_and_set_bit(OPTION_L2_CLEANUP, &mgr->options);
-	else
-		test_and_clear_bit(OPTION_L2_CLEANUP, &mgr->options);
-	return 0;
+	int	*val = (int *)arg;
+	int	ret = 0;
+
+	switch (val[0]) {
+	case IMCLEAR_L2:
+		if (val[1])
+			test_and_set_bit(OPTION_L2_CLEANUP, &mgr->options);
+		else
+			test_and_clear_bit(OPTION_L2_CLEANUP, &mgr->options);
+		break;
+	case IMHOLD_L1:
+		if (val[1])
+			test_and_set_bit(OPTION_L1_HOLD, &mgr->options);
+		else
+			test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
 }
 
 /* This function does create a L2 for fixed TEI in NT Mode */
@@ -1147,7 +1164,7 @@ static int
 check_data(struct manager *mgr, struct sk_buff *skb)
 {
 	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
-	int			ret, tei;
+	int			ret, tei, sapi;
 	struct layer2		*l2;
 
 	if (*debug & DEBUG_L2_CTRL)
@@ -1159,20 +1176,27 @@ check_data(struct manager *mgr, struct sk_buff *skb)
 		return -ENOTCONN;
 	if (skb->len != 3)
 		return -ENOTCONN;
-	if (skb->data[0] != 0)
-		/* only SAPI 0 command */
-		return -ENOTCONN;
+	if (skb->data[0] & 3) /* EA0 and CR must be  0 */
+		return -EINVAL;
+	sapi = skb->data[0] >> 2;
 	if (!(skb->data[1] & 1)) /* invalid EA1 */
 		return -EINVAL;
-	tei = skb->data[1] >> 0;
+	tei = skb->data[1] >> 1;
 	if (tei > 63) /* not a fixed tei */
 		return -ENOTCONN;
 	if ((skb->data[2] & ~0x10) != SABME)
 		return -ENOTCONN;
 	/* We got a SABME for a fixed TEI */
-	l2 = create_new_tei(mgr, tei);
-	if (!l2)
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s: SABME sapi(%d) tei(%d)\n",
+		    __func__, sapi, tei);
+	l2 = create_new_tei(mgr, tei, sapi);
+	if (!l2) {
+		if (*debug & DEBUG_L2_CTRL)
+			printk(KERN_DEBUG "%s: failed to create new tei\n",
+			    __func__);
 		return -ENOMEM;
+	}
 	ret = l2->ch.send(&l2->ch, skb);
 	return ret;
 }
diff --git a/drivers/isdn/mISDN/timerdev.c b/drivers/isdn/mISDN/timerdev.c
index bbd99d3282c..5b7e9bf514f 100644
--- a/drivers/isdn/mISDN/timerdev.c
+++ b/drivers/isdn/mISDN/timerdev.c
@@ -259,7 +259,7 @@ mISDN_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
 	return ret;
 }
 
-static struct file_operations mISDN_fops = {
+static const struct file_operations mISDN_fops = {
 	.read		= mISDN_read,
 	.poll		= mISDN_poll,
 	.ioctl		= mISDN_ioctl,
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1aa46a390a0..173d104d9ff 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index aa2e7ae0cda..aa7acf3b922 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index a3d3cbab359..0aaa0597a62 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
 config LGUEST
 	tristate "Linux hypervisor example code"
-	depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX
+	depends on X86_32 && EXPERIMENTAL && EVENTFD
 	select HVC_DRIVER
 	---help---
 	  This is a very simple module which allows you to run
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 4845fb3cf74..a6974e9b8eb 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -95,7 +95,7 @@ static __init int map_switcher(void)
 	 * array of struct pages.  It increments that pointer, but we don't
 	 * care. */
 	pagep = switcher_page;
-	err = map_vm_area(switcher_vma, PAGE_KERNEL, &pagep);
+	err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
 	if (err) {
 		printk("lguest: map_vm_area failed: %i\n", err);
 		goto free_vma;
@@ -188,6 +188,9 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 {
 	/* We stop running once the Guest is dead. */
 	while (!cpu->lg->dead) {
+		unsigned int irq;
+		bool more;
+
 		/* First we run any hypercalls the Guest wants done. */
 		if (cpu->hcall)
 			do_hypercalls(cpu);
@@ -195,23 +198,23 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 		/* It's possible the Guest did a NOTIFY hypercall to the
 		 * Launcher, in which case we return from the read() now. */
 		if (cpu->pending_notify) {
-			if (put_user(cpu->pending_notify, user))
-				return -EFAULT;
-			return sizeof(cpu->pending_notify);
+			if (!send_notify_to_eventfd(cpu)) {
+				if (put_user(cpu->pending_notify, user))
+					return -EFAULT;
+				return sizeof(cpu->pending_notify);
+			}
 		}
 
 		/* Check for signals */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
-		/* If Waker set break_out, return to Launcher. */
-		if (cpu->break_out)
-			return -EAGAIN;
-
 		/* Check if there are any interrupts which can be delivered now:
 		 * if so, this sets up the hander to be executed when we next
 		 * run the Guest. */
-		maybe_do_interrupt(cpu);
+		irq = interrupt_pending(cpu, &more);
+		if (irq < LGUEST_IRQS)
+			try_deliver_interrupt(cpu, irq, more);
 
 		/* All long-lived kernel loops need to check with this horrible
 		 * thing called the freezer.  If the Host is trying to suspend,
@@ -224,10 +227,15 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 			break;
 
 		/* If the Guest asked to be stopped, we sleep.  The Guest's
-		 * clock timer or LHREQ_BREAK from the Waker will wake us. */
+		 * clock timer will wake us. */
 		if (cpu->halted) {
 			set_current_state(TASK_INTERRUPTIBLE);
-			schedule();
+			/* Just before we sleep, make sure no interrupt snuck in
+			 * which we should be doing. */
+			if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
+				set_current_state(TASK_RUNNING);
+			else
+				schedule();
 			continue;
 		}
 
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 54d66f05fef..c29ffa19cb7 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -37,6 +37,10 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 		/* This call does nothing, except by breaking out of the Guest
 		 * it makes us process all the asynchronous hypercalls. */
 		break;
+	case LHCALL_SEND_INTERRUPTS:
+		/* This call does nothing too, but by breaking out of the Guest
+		 * it makes us process any pending interrupts. */
+		break;
 	case LHCALL_LGUEST_INIT:
 		/* You can't get here unless you're already initialized.  Don't
 		 * do that. */
@@ -73,11 +77,21 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 		guest_set_stack(cpu, args->arg1, args->arg2, args->arg3);
 		break;
 	case LHCALL_SET_PTE:
+#ifdef CONFIG_X86_PAE
+		guest_set_pte(cpu, args->arg1, args->arg2,
+				__pte(args->arg3 | (u64)args->arg4 << 32));
+#else
 		guest_set_pte(cpu, args->arg1, args->arg2, __pte(args->arg3));
+#endif
+		break;
+	case LHCALL_SET_PGD:
+		guest_set_pgd(cpu->lg, args->arg1, args->arg2);
 		break;
+#ifdef CONFIG_X86_PAE
 	case LHCALL_SET_PMD:
 		guest_set_pmd(cpu->lg, args->arg1, args->arg2);
 		break;
+#endif
 	case LHCALL_SET_CLOCKEVENT:
 		guest_set_clockevent(cpu, args->arg1);
 		break;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 6e99adbe194..0e9067b0d50 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -128,30 +128,39 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 /*H:205
  * Virtual Interrupts.
  *
- * maybe_do_interrupt() gets called before every entry to the Guest, to see if
- * we should divert the Guest to running an interrupt handler. */
-void maybe_do_interrupt(struct lg_cpu *cpu)
+ * interrupt_pending() returns the first pending interrupt which isn't blocked
+ * by the Guest.  It is called before every entry to the Guest, and just before
+ * we go to sleep when the Guest has halted itself. */
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 {
 	unsigned int irq;
 	DECLARE_BITMAP(blk, LGUEST_IRQS);
-	struct desc_struct *idt;
 
 	/* If the Guest hasn't even initialized yet, we can do nothing. */
 	if (!cpu->lg->lguest_data)
-		return;
+		return LGUEST_IRQS;
 
 	/* Take our "irqs_pending" array and remove any interrupts the Guest
 	 * wants blocked: the result ends up in "blk". */
 	if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
 			   sizeof(blk)))
-		return;
+		return LGUEST_IRQS;
 	bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
 
 	/* Find the first interrupt. */
 	irq = find_first_bit(blk, LGUEST_IRQS);
-	/* None?  Nothing to do */
-	if (irq >= LGUEST_IRQS)
-		return;
+	*more = find_next_bit(blk, LGUEST_IRQS, irq+1);
+
+	return irq;
+}
+
+/* This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending(). */
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
+{
+	struct desc_struct *idt;
+
+	BUG_ON(irq >= LGUEST_IRQS);
 
 	/* They may be in the middle of an iret, where they asked us never to
 	 * deliver interrupts. */
@@ -170,8 +179,12 @@ void maybe_do_interrupt(struct lg_cpu *cpu)
 		u32 irq_enabled;
 		if (get_user(irq_enabled, &cpu->lg->lguest_data->irq_enabled))
 			irq_enabled = 0;
-		if (!irq_enabled)
+		if (!irq_enabled) {
+			/* Make sure they know an IRQ is pending. */
+			put_user(X86_EFLAGS_IF,
+				 &cpu->lg->lguest_data->irq_pending);
 			return;
+		}
 	}
 
 	/* Look at the IDT entry the Guest gave us for this interrupt.  The
@@ -194,6 +207,25 @@ void maybe_do_interrupt(struct lg_cpu *cpu)
 	 * here is a compromise which means at least it gets updated every
 	 * timer interrupt. */
 	write_timestamp(cpu);
+
+	/* If there are no other interrupts we want to deliver, clear
+	 * the pending flag. */
+	if (!more)
+		put_user(0, &cpu->lg->lguest_data->irq_pending);
+}
+
+/* And this is the routine when we want to set an interrupt for the Guest. */
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
+{
+	/* Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt. */
+	set_bit(irq, cpu->irqs_pending);
+
+	/* Make sure it sees it; it might be asleep (eg. halted), or
+	 * running the Guest right now, in which case kick_process()
+	 * will knock it out. */
+	if (!wake_up_process(cpu->tsk))
+		kick_process(cpu->tsk);
 }
 /*:*/
 
@@ -510,10 +542,7 @@ static enum hrtimer_restart clockdev_fn(struct hrtimer *timer)
 	struct lg_cpu *cpu = container_of(timer, struct lg_cpu, hrt);
 
 	/* Remember the first interrupt is the timer interrupt. */
-	set_bit(0, cpu->irqs_pending);
-	/* If the Guest is actually stopped, we need to wake it up. */
-	if (cpu->halted)
-		wake_up_process(cpu->tsk);
+	set_interrupt(cpu, 0);
 	return HRTIMER_NORESTART;
 }
 
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index af92a176697..d4e8979735c 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -49,7 +49,7 @@ struct lg_cpu {
 	u32 cr2;
 	int ts;
 	u32 esp1;
-	u8 ss1;
+	u16 ss1;
 
 	/* Bitmap of what has changed: see CHANGED_* above. */
 	int changed;
@@ -71,9 +71,7 @@ struct lg_cpu {
 	/* Virtual clock device */
 	struct hrtimer hrt;
 
-	/* Do we need to stop what we're doing and return to userspace? */
-	int break_out;
-	wait_queue_head_t break_wq;
+	/* Did the Guest tell us to halt? */
 	int halted;
 
 	/* Pending virtual interrupts */
@@ -82,6 +80,16 @@ struct lg_cpu {
 	struct lg_cpu_arch arch;
 };
 
+struct lg_eventfd {
+	unsigned long addr;
+	struct file *event;
+};
+
+struct lg_eventfd_map {
+	unsigned int num;
+	struct lg_eventfd map[];
+};
+
 /* The private info the thread maintains about the guest. */
 struct lguest
 {
@@ -102,6 +110,8 @@ struct lguest
 	unsigned int stack_pages;
 	u32 tsc_khz;
 
+	struct lg_eventfd_map *eventfds;
+
 	/* Dead? */
 	const char *dead;
 };
@@ -137,9 +147,13 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
  * in the kernel. */
 #define pgd_flags(x)	(pgd_val(x) & ~PAGE_MASK)
 #define pgd_pfn(x)	(pgd_val(x) >> PAGE_SHIFT)
+#define pmd_flags(x)    (pmd_val(x) & ~PAGE_MASK)
+#define pmd_pfn(x)	(pmd_val(x) >> PAGE_SHIFT)
 
 /* interrupts_and_traps.c: */
-void maybe_do_interrupt(struct lg_cpu *cpu);
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more);
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more);
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq);
 bool deliver_trap(struct lg_cpu *cpu, unsigned int num);
 void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int i,
 			  u32 low, u32 hi);
@@ -150,6 +164,7 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
 void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		const unsigned long *def);
 void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta);
+bool send_notify_to_eventfd(struct lg_cpu *cpu);
 void init_clockdev(struct lg_cpu *cpu);
 bool check_syscall_vector(struct lguest *lg);
 int init_interrupts(void);
@@ -168,7 +183,10 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
 int init_guest_pagetable(struct lguest *lg);
 void free_guest_pagetable(struct lguest *lg);
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable);
+void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#ifdef CONFIG_X86_PAE
 void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#endif
 void guest_pagetable_clear_all(struct lg_cpu *cpu);
 void guest_pagetable_flush_user(struct lg_cpu *cpu);
 void guest_set_pte(struct lg_cpu *cpu, unsigned long gpgdir,
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index df44d962626..e082cdac88b 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -228,7 +228,8 @@ extern void lguest_setup_irq(unsigned int irq);
  * function. */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 				    unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				    void (*callback)(struct virtqueue *vq),
+				    const char *name)
 {
 	struct lguest_device *ldev = to_lgdev(vdev);
 	struct lguest_vq_info *lvq;
@@ -263,7 +264,7 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 	/* OK, tell virtio_ring.c to set up a virtqueue now we know its size
 	 * and we've got a pointer to its pages. */
 	vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
-				 vdev, lvq->pages, lg_notify, callback);
+				 vdev, lvq->pages, lg_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto unmap;
@@ -312,6 +313,38 @@ static void lg_del_vq(struct virtqueue *vq)
 	kfree(lvq);
 }
 
+static void lg_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		lg_del_vq(vq);
+}
+
+static int lg_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	struct lguest_device *ldev = to_lgdev(vdev);
+	int i;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > ldev->desc->num_vq)
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = lg_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error;
+	}
+	return 0;
+
+error:
+	lg_del_vqs(vdev);
+	return PTR_ERR(vqs[i]);
+}
+
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
 	.get_features = lg_get_features,
@@ -321,8 +354,8 @@ static struct virtio_config_ops lguest_config_ops = {
 	.get_status = lg_get_status,
 	.set_status = lg_set_status,
 	.reset = lg_reset,
-	.find_vq = lg_find_vq,
-	.del_vq = lg_del_vq,
+	.find_vqs = lg_find_vqs,
+	.del_vqs = lg_del_vqs,
 };
 
 /* The root device for the lguest virtio devices.  This makes them appear as
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index b8ee103eed5..32e29712105 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -7,32 +7,83 @@
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
+#include <linux/eventfd.h>
+#include <linux/file.h>
 #include "lg.h"
 
-/*L:055 When something happens, the Waker process needs a way to stop the
- * kernel running the Guest and return to the Launcher.  So the Waker writes
- * LHREQ_BREAK and the value "1" to /dev/lguest to do this.  Once the Launcher
- * has done whatever needs attention, it writes LHREQ_BREAK and "0" to release
- * the Waker. */
-static int break_guest_out(struct lg_cpu *cpu, const unsigned long __user*input)
+bool send_notify_to_eventfd(struct lg_cpu *cpu)
 {
-	unsigned long on;
+	unsigned int i;
+	struct lg_eventfd_map *map;
+
+	/* lg->eventfds is RCU-protected */
+	rcu_read_lock();
+	map = rcu_dereference(cpu->lg->eventfds);
+	for (i = 0; i < map->num; i++) {
+		if (map->map[i].addr == cpu->pending_notify) {
+			eventfd_signal(map->map[i].event, 1);
+			cpu->pending_notify = 0;
+			break;
+		}
+	}
+	rcu_read_unlock();
+	return cpu->pending_notify == 0;
+}
 
-	/* Fetch whether they're turning break on or off. */
-	if (get_user(on, input) != 0)
-		return -EFAULT;
+static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
+{
+	struct lg_eventfd_map *new, *old = lg->eventfds;
 
-	if (on) {
-		cpu->break_out = 1;
-		/* Pop it out of the Guest (may be running on different CPU) */
-		wake_up_process(cpu->tsk);
-		/* Wait for them to reset it */
-		return wait_event_interruptible(cpu->break_wq, !cpu->break_out);
-	} else {
-		cpu->break_out = 0;
-		wake_up(&cpu->break_wq);
-		return 0;
+	if (!addr)
+		return -EINVAL;
+
+	/* Replace the old array with the new one, carefully: others can
+	 * be accessing it at the same time */
+	new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
+		      GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	/* First make identical copy. */
+	memcpy(new->map, old->map, sizeof(old->map[0]) * old->num);
+	new->num = old->num;
+
+	/* Now append new entry. */
+	new->map[new->num].addr = addr;
+	new->map[new->num].event = eventfd_fget(fd);
+	if (IS_ERR(new->map[new->num].event)) {
+		kfree(new);
+		return PTR_ERR(new->map[new->num].event);
 	}
+	new->num++;
+
+	/* Now put new one in place. */
+	rcu_assign_pointer(lg->eventfds, new);
+
+	/* We're not in a big hurry.  Wait until noone's looking at old
+	 * version, then delete it. */
+	synchronize_rcu();
+	kfree(old);
+
+	return 0;
+}
+
+static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
+{
+	unsigned long addr, fd;
+	int err;
+
+	if (get_user(addr, input) != 0)
+		return -EFAULT;
+	input++;
+	if (get_user(fd, input) != 0)
+		return -EFAULT;
+
+	mutex_lock(&lguest_lock);
+	err = add_eventfd(lg, addr, fd);
+	mutex_unlock(&lguest_lock);
+
+	return 0;
 }
 
 /*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
@@ -45,9 +96,8 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 		return -EFAULT;
 	if (irq >= LGUEST_IRQS)
 		return -EINVAL;
-	/* Next time the Guest runs, the core code will see if it can deliver
-	 * this interrupt. */
-	set_bit(irq, cpu->irqs_pending);
+
+	set_interrupt(cpu, irq);
 	return 0;
 }
 
@@ -126,9 +176,6 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 	 * address. */
 	lguest_arch_setup_regs(cpu, start_ip);
 
-	/* Initialize the queue for the Waker to wait on */
-	init_waitqueue_head(&cpu->break_wq);
-
 	/* We keep a pointer to the Launcher task (ie. current task) for when
 	 * other Guests want to wake this one (eg. console input). */
 	cpu->tsk = current;
@@ -185,6 +232,13 @@ static int initialize(struct file *file, const unsigned long __user *input)
 		goto unlock;
 	}
 
+	lg->eventfds = kmalloc(sizeof(*lg->eventfds), GFP_KERNEL);
+	if (!lg->eventfds) {
+		err = -ENOMEM;
+		goto free_lg;
+	}
+	lg->eventfds->num = 0;
+
 	/* Populate the easy fields of our "struct lguest" */
 	lg->mem_base = (void __user *)args[0];
 	lg->pfn_limit = args[1];
@@ -192,7 +246,7 @@ static int initialize(struct file *file, const unsigned long __user *input)
 	/* This is the first cpu (cpu 0) and it will start booting at args[2] */
 	err = lg_cpu_start(&lg->cpus[0], 0, args[2]);
 	if (err)
-		goto release_guest;
+		goto free_eventfds;
 
 	/* Initialize the Guest's shadow page tables, using the toplevel
 	 * address the Launcher gave us.  This allocates memory, so can fail. */
@@ -211,7 +265,9 @@ static int initialize(struct file *file, const unsigned long __user *input)
 free_regs:
 	/* FIXME: This should be in free_vcpu */
 	free_page(lg->cpus[0].regs_page);
-release_guest:
+free_eventfds:
+	kfree(lg->eventfds);
+free_lg:
 	kfree(lg);
 unlock:
 	mutex_unlock(&lguest_lock);
@@ -252,11 +308,6 @@ static ssize_t write(struct file *file, const char __user *in,
 		/* Once the Guest is dead, you can only read() why it died. */
 		if (lg->dead)
 			return -ENOENT;
-
-		/* If you're not the task which owns the Guest, all you can do
-		 * is break the Launcher out of running the Guest. */
-		if (current != cpu->tsk && req != LHREQ_BREAK)
-			return -EPERM;
 	}
 
 	switch (req) {
@@ -264,8 +315,8 @@ static ssize_t write(struct file *file, const char __user *in,
 		return initialize(file, input);
 	case LHREQ_IRQ:
 		return user_send_irq(cpu, input);
-	case LHREQ_BREAK:
-		return break_guest_out(cpu, input);
+	case LHREQ_EVENTFD:
+		return attach_eventfd(lg, input);
 	default:
 		return -EINVAL;
 	}
@@ -303,6 +354,12 @@ static int close(struct inode *inode, struct file *file)
 		 * the Launcher's memory management structure. */
 		mmput(lg->cpus[i].mm);
 	}
+
+	/* Release any eventfds they registered. */
+	for (i = 0; i < lg->eventfds->num; i++)
+		fput(lg->eventfds->map[i].event);
+	kfree(lg->eventfds);
+
 	/* If lg->dead doesn't contain an error code it will be NULL or a
 	 * kmalloc()ed string, either of which is ok to hand to kfree(). */
 	if (!IS_ERR(lg->dead))
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a059cf9980f..a6fe1abda24 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -53,6 +53,17 @@
  * page.  */
 #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
 
+/* For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.  */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_PMD_INDEX 	(PTRS_PER_PMD - 1)
+#define RESERVE_MEM 		2U
+#define CHECK_GPGD_MASK		_PAGE_PRESENT
+#else
+#define RESERVE_MEM 		4U
+#define CHECK_GPGD_MASK		_PAGE_TABLE
+#endif
+
 /* We actually need a separate PTE page for each CPU.  Remember that after the
  * Switcher code itself comes two pages for each CPU, and we don't want this
  * CPU's guest to see the pages of any other CPU. */
@@ -73,24 +84,59 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 {
 	unsigned int index = pgd_index(vaddr);
 
+#ifndef CONFIG_X86_PAE
 	/* We kill any Guest trying to touch the Switcher addresses. */
 	if (index >= SWITCHER_PGD_INDEX) {
 		kill_guest(cpu, "attempt to access switcher pages");
 		index = 0;
 	}
+#endif
 	/* Return a pointer index'th pgd entry for the i'th page table. */
 	return &cpu->lg->pgdirs[i].pgdir[index];
 }
 
+#ifdef CONFIG_X86_PAE
+/* This routine then takes the PGD entry given above, which contains the
+ * address of the PMD page.  It then returns a pointer to the PMD entry for the
+ * given address. */
+static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
+{
+	unsigned int index = pmd_index(vaddr);
+	pmd_t *page;
+
+	/* We kill any Guest trying to touch the Switcher addresses. */
+	if (pgd_index(vaddr) == SWITCHER_PGD_INDEX &&
+					index >= SWITCHER_PMD_INDEX) {
+		kill_guest(cpu, "attempt to access switcher pages");
+		index = 0;
+	}
+
+	/* You should never call this if the PGD entry wasn't valid */
+	BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
+	page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
+
+	return &page[index];
+}
+#endif
+
 /* This routine then takes the page directory entry returned above, which
  * contains the address of the page table entry (PTE) page.  It then returns a
  * pointer to the PTE entry for the given address. */
-static pte_t *spte_addr(pgd_t spgd, unsigned long vaddr)
+static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
+#ifdef CONFIG_X86_PAE
+	pmd_t *pmd = spmd_addr(cpu, spgd, vaddr);
+	pte_t *page = __va(pmd_pfn(*pmd) << PAGE_SHIFT);
+
+	/* You should never call this if the PMD entry wasn't valid */
+	BUG_ON(!(pmd_flags(*pmd) & _PAGE_PRESENT));
+#else
 	pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
 	/* You should never call this if the PGD entry wasn't valid */
 	BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
-	return &page[(vaddr >> PAGE_SHIFT) % PTRS_PER_PTE];
+#endif
+
+	return &page[pte_index(vaddr)];
 }
 
 /* These two functions just like the above two, except they access the Guest
@@ -101,12 +147,32 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 	return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index * sizeof(pgd_t);
 }
 
-static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
+#ifdef CONFIG_X86_PAE
+static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
+{
+	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
+	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
+	return gpage + pmd_index(vaddr) * sizeof(pmd_t);
+}
+
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+			       pmd_t gpmd, unsigned long vaddr)
+{
+	unsigned long gpage = pmd_pfn(gpmd) << PAGE_SHIFT;
+
+	BUG_ON(!(pmd_flags(gpmd) & _PAGE_PRESENT));
+	return gpage + pte_index(vaddr) * sizeof(pte_t);
+}
+#else
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+				pgd_t gpgd, unsigned long vaddr)
 {
 	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
+
 	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
-	return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
+	return gpage + pte_index(vaddr) * sizeof(pte_t);
 }
+#endif
 /*:*/
 
 /*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
@@ -171,7 +237,7 @@ static void release_pte(pte_t pte)
 	/* Remember that get_user_pages_fast() took a reference to the page, in
 	 * get_pfn()?  We have to put it back now. */
 	if (pte_flags(pte) & _PAGE_PRESENT)
-		put_page(pfn_to_page(pte_pfn(pte)));
+		put_page(pte_page(pte));
 }
 /*:*/
 
@@ -184,11 +250,20 @@ static void check_gpte(struct lg_cpu *cpu, pte_t gpte)
 
 static void check_gpgd(struct lg_cpu *cpu, pgd_t gpgd)
 {
-	if ((pgd_flags(gpgd) & ~_PAGE_TABLE) ||
+	if ((pgd_flags(gpgd) & ~CHECK_GPGD_MASK) ||
 	   (pgd_pfn(gpgd) >= cpu->lg->pfn_limit))
 		kill_guest(cpu, "bad page directory entry");
 }
 
+#ifdef CONFIG_X86_PAE
+static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
+{
+	if ((pmd_flags(gpmd) & ~_PAGE_TABLE) ||
+	   (pmd_pfn(gpmd) >= cpu->lg->pfn_limit))
+		kill_guest(cpu, "bad page middle directory entry");
+}
+#endif
+
 /*H:330
  * (i) Looking up a page table entry when the Guest faults.
  *
@@ -207,6 +282,11 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	pte_t gpte;
 	pte_t *spte;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+	pmd_t gpmd;
+#endif
+
 	/* First step: get the top-level Guest page table entry. */
 	gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
 	/* Toplevel not present?  We can't map it in. */
@@ -228,12 +308,45 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		check_gpgd(cpu, gpgd);
 		/* And we copy the flags to the shadow PGD entry.  The page
 		 * number in the shadow PGD is the page we just allocated. */
-		*spgd = __pgd(__pa(ptepage) | pgd_flags(gpgd));
+		set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
 	}
 
+#ifdef CONFIG_X86_PAE
+	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
+	/* middle level not present?  We can't map it in. */
+	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+		return false;
+
+	/* Now look at the matching shadow entry. */
+	spmd = spmd_addr(cpu, *spgd, vaddr);
+
+	if (!(pmd_flags(*spmd) & _PAGE_PRESENT)) {
+		/* No shadow entry: allocate a new shadow PTE page. */
+		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
+
+		/* This is not really the Guest's fault, but killing it is
+		* simple for this corner case. */
+		if (!ptepage) {
+			kill_guest(cpu, "out of memory allocating pte page");
+			return false;
+		}
+
+		/* We check that the Guest pmd is OK. */
+		check_gpmd(cpu, gpmd);
+
+		/* And we copy the flags to the shadow PMD entry.  The page
+		 * number in the shadow PMD is the page we just allocated. */
+		native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
+	}
+
+	/* OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later. */
+	gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
+#else
 	/* OK, now we look at the lower level in the Guest page table: keep its
 	 * address, because we might update it later. */
-	gpte_ptr = gpte_addr(gpgd, vaddr);
+	gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
+#endif
 	gpte = lgread(cpu, gpte_ptr, pte_t);
 
 	/* If this page isn't in the Guest page tables, we can't page it in. */
@@ -259,7 +372,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		gpte = pte_mkdirty(gpte);
 
 	/* Get the pointer to the shadow PTE entry we're going to set. */
-	spte = spte_addr(*spgd, vaddr);
+	spte = spte_addr(cpu, *spgd, vaddr);
 	/* If there was a valid shadow PTE entry here before, we release it.
 	 * This can happen with a write to a previously read-only entry. */
 	release_pte(*spte);
@@ -273,7 +386,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		 * table entry, even if the Guest says it's writable.  That way
 		 * we will come back here when a write does actually occur, so
 		 * we can update the Guest's _PAGE_DIRTY flag. */
-		*spte = gpte_to_spte(cpu, pte_wrprotect(gpte), 0);
+		native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
 	/* Finally, we write the Guest PTE entry back: we've set the
 	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
@@ -301,14 +414,23 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 	pgd_t *spgd;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+#endif
 	/* Look at the current top level entry: is it present? */
 	spgd = spgd_addr(cpu, cpu->cpu_pgd, vaddr);
 	if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
 		return false;
 
+#ifdef CONFIG_X86_PAE
+	spmd = spmd_addr(cpu, *spgd, vaddr);
+	if (!(pmd_flags(*spmd) & _PAGE_PRESENT))
+		return false;
+#endif
+
 	/* Check the flags on the pte entry itself: it must be present and
 	 * writable. */
-	flags = pte_flags(*(spte_addr(*spgd, vaddr)));
+	flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
 
 	return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
 }
@@ -322,8 +444,43 @@ void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
 		kill_guest(cpu, "bad stack page %#lx", vaddr);
 }
 
+#ifdef CONFIG_X86_PAE
+static void release_pmd(pmd_t *spmd)
+{
+	/* If the entry's not present, there's nothing to release. */
+	if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+		unsigned int i;
+		pte_t *ptepage = __va(pmd_pfn(*spmd) << PAGE_SHIFT);
+		/* For each entry in the page, we might need to release it. */
+		for (i = 0; i < PTRS_PER_PTE; i++)
+			release_pte(ptepage[i]);
+		/* Now we can free the page of PTEs */
+		free_page((long)ptepage);
+		/* And zero out the PMD entry so we never release it twice. */
+		native_set_pmd(spmd, __pmd(0));
+	}
+}
+
+static void release_pgd(pgd_t *spgd)
+{
+	/* If the entry's not present, there's nothing to release. */
+	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
+		unsigned int i;
+		pmd_t *pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+		for (i = 0; i < PTRS_PER_PMD; i++)
+			release_pmd(&pmdpage[i]);
+
+		/* Now we can free the page of PMDs */
+		free_page((long)pmdpage);
+		/* And zero out the PGD entry so we never release it twice. */
+		set_pgd(spgd, __pgd(0));
+	}
+}
+
+#else /* !CONFIG_X86_PAE */
 /*H:450 If we chase down the release_pgd() code, it looks like this: */
-static void release_pgd(struct lguest *lg, pgd_t *spgd)
+static void release_pgd(pgd_t *spgd)
 {
 	/* If the entry's not present, there's nothing to release. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
@@ -341,7 +498,7 @@ static void release_pgd(struct lguest *lg, pgd_t *spgd)
 		*spgd = __pgd(0);
 	}
 }
-
+#endif
 /*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
  * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
  * It simply releases every PTE page from 0 up to the Guest's kernel address. */
@@ -350,7 +507,7 @@ static void flush_user_mappings(struct lguest *lg, int idx)
 	unsigned int i;
 	/* Release every pgd entry up to the kernel's address. */
 	for (i = 0; i < pgd_index(lg->kernel_address); i++)
-		release_pgd(lg, lg->pgdirs[idx].pgdir + i);
+		release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
 /*H:440 (v) Flushing (throwing away) page tables,
@@ -369,7 +526,9 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	pgd_t gpgd;
 	pte_t gpte;
-
+#ifdef CONFIG_X86_PAE
+	pmd_t gpmd;
+#endif
 	/* First step: get the top-level Guest page table entry. */
 	gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
 	/* Toplevel not present?  We can't map it in. */
@@ -378,7 +537,14 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
 		return -1UL;
 	}
 
-	gpte = lgread(cpu, gpte_addr(gpgd, vaddr), pte_t);
+#ifdef CONFIG_X86_PAE
+	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
+	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+		kill_guest(cpu, "Bad address %#lx", vaddr);
+	gpte = lgread(cpu, gpte_addr(cpu, gpmd, vaddr), pte_t);
+#else
+	gpte = lgread(cpu, gpte_addr(cpu, gpgd, vaddr), pte_t);
+#endif
 	if (!(pte_flags(gpte) & _PAGE_PRESENT))
 		kill_guest(cpu, "Bad address %#lx", vaddr);
 
@@ -405,6 +571,9 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 			      int *blank_pgdir)
 {
 	unsigned int next;
+#ifdef CONFIG_X86_PAE
+	pmd_t *pmd_table;
+#endif
 
 	/* We pick one entry at random to throw out.  Choosing the Least
 	 * Recently Used might be better, but this is easy. */
@@ -416,10 +585,27 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 		/* If the allocation fails, just keep using the one we have */
 		if (!cpu->lg->pgdirs[next].pgdir)
 			next = cpu->cpu_pgd;
-		else
-			/* This is a blank page, so there are no kernel
-			 * mappings: caller must map the stack! */
+		else {
+#ifdef CONFIG_X86_PAE
+			/* In PAE mode, allocate a pmd page and populate the
+			 * last pgd entry. */
+			pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
+			if (!pmd_table) {
+				free_page((long)cpu->lg->pgdirs[next].pgdir);
+				set_pgd(cpu->lg->pgdirs[next].pgdir, __pgd(0));
+				next = cpu->cpu_pgd;
+			} else {
+				set_pgd(cpu->lg->pgdirs[next].pgdir +
+					SWITCHER_PGD_INDEX,
+					__pgd(__pa(pmd_table) | _PAGE_PRESENT));
+				/* This is a blank page, so there are no kernel
+				 * mappings: caller must map the stack! */
+				*blank_pgdir = 1;
+			}
+#else
 			*blank_pgdir = 1;
+#endif
+		}
 	}
 	/* Record which Guest toplevel this shadows. */
 	cpu->lg->pgdirs[next].gpgdir = gpgdir;
@@ -431,7 +617,7 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 
 /*H:430 (iv) Switching page tables
  *
- * Now we've seen all the page table setting and manipulation, let's see what
+ * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
  * pgdir).  This occurs on almost every context switch. */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
@@ -460,10 +646,25 @@ static void release_all_pagetables(struct lguest *lg)
 
 	/* Every shadow pagetable this Guest has */
 	for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
-		if (lg->pgdirs[i].pgdir)
+		if (lg->pgdirs[i].pgdir) {
+#ifdef CONFIG_X86_PAE
+			pgd_t *spgd;
+			pmd_t *pmdpage;
+			unsigned int k;
+
+			/* Get the last pmd page. */
+			spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
+			pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+			/* And release the pmd entries of that pmd page,
+			 * except for the switcher pmd. */
+			for (k = 0; k < SWITCHER_PMD_INDEX; k++)
+				release_pmd(&pmdpage[k]);
+#endif
 			/* Every PGD entry except the Switcher at the top */
 			for (j = 0; j < SWITCHER_PGD_INDEX; j++)
-				release_pgd(lg, lg->pgdirs[i].pgdir + j);
+				release_pgd(lg->pgdirs[i].pgdir + j);
+		}
 }
 
 /* We also throw away everything when a Guest tells us it's changed a kernel
@@ -504,24 +705,37 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
 {
 	/* Look up the matching shadow page directory entry. */
 	pgd_t *spgd = spgd_addr(cpu, idx, vaddr);
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+#endif
 
 	/* If the top level isn't present, there's no entry to update. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
-		/* Otherwise, we start by releasing the existing entry. */
-		pte_t *spte = spte_addr(*spgd, vaddr);
-		release_pte(*spte);
-
-		/* If they're setting this entry as dirty or accessed, we might
-		 * as well put that entry they've given us in now.  This shaves
-		 * 10% off a copy-on-write micro-benchmark. */
-		if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
-			check_gpte(cpu, gpte);
-			*spte = gpte_to_spte(cpu, gpte,
-					     pte_flags(gpte) & _PAGE_DIRTY);
-		} else
-			/* Otherwise kill it and we can demand_page() it in
-			 * later. */
-			*spte = __pte(0);
+#ifdef CONFIG_X86_PAE
+		spmd = spmd_addr(cpu, *spgd, vaddr);
+		if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+#endif
+			/* Otherwise, we start by releasing
+			 * the existing entry. */
+			pte_t *spte = spte_addr(cpu, *spgd, vaddr);
+			release_pte(*spte);
+
+			/* If they're setting this entry as dirty or accessed,
+			 * we might as well put that entry they've given us
+			 * in now.  This shaves 10% off a
+			 * copy-on-write micro-benchmark. */
+			if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
+				check_gpte(cpu, gpte);
+				native_set_pte(spte,
+						gpte_to_spte(cpu, gpte,
+						pte_flags(gpte) & _PAGE_DIRTY));
+			} else
+				/* Otherwise kill it and we can demand_page()
+				 * it in later. */
+				native_set_pte(spte, __pte(0));
+#ifdef CONFIG_X86_PAE
+		}
+#endif
 	}
 }
 
@@ -568,12 +782,10 @@ void guest_set_pte(struct lg_cpu *cpu,
  *
  * So with that in mind here's our code to to update a (top-level) PGD entry:
  */
-void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
+void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 {
 	int pgdir;
 
-	/* The kernel seems to try to initialize this early on: we ignore its
-	 * attempts to map over the Switcher. */
 	if (idx >= SWITCHER_PGD_INDEX)
 		return;
 
@@ -581,8 +793,14 @@ void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 	pgdir = find_pgdir(lg, gpgdir);
 	if (pgdir < ARRAY_SIZE(lg->pgdirs))
 		/* ... throw it away. */
-		release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx);
+		release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
+#ifdef CONFIG_X86_PAE
+void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
+{
+	guest_pagetable_clear_all(&lg->cpus[0]);
+}
+#endif
 
 /* Once we know how much memory we have we can construct simple identity
  * (which set virtual == physical) and linear mappings
@@ -596,8 +814,16 @@ static unsigned long setup_pagetables(struct lguest *lg,
 {
 	pgd_t __user *pgdir;
 	pte_t __user *linear;
-	unsigned int mapped_pages, i, linear_pages, phys_linear;
 	unsigned long mem_base = (unsigned long)lg->mem_base;
+	unsigned int mapped_pages, i, linear_pages;
+#ifdef CONFIG_X86_PAE
+	pmd_t __user *pmds;
+	unsigned int j;
+	pgd_t pgd;
+	pmd_t pmd;
+#else
+	unsigned int phys_linear;
+#endif
 
 	/* We have mapped_pages frames to map, so we need
 	 * linear_pages page tables to map them. */
@@ -610,6 +836,9 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	/* Now we use the next linear_pages pages as pte pages */
 	linear = (void *)pgdir - linear_pages * PAGE_SIZE;
 
+#ifdef CONFIG_X86_PAE
+	pmds = (void *)linear - PAGE_SIZE;
+#endif
 	/* Linear mapping is easy: put every page's address into the
 	 * mapping in order. */
 	for (i = 0; i < mapped_pages; i++) {
@@ -621,6 +850,22 @@ static unsigned long setup_pagetables(struct lguest *lg,
 
 	/* The top level points to the linear page table pages above.
 	 * We setup the identity and linear mappings here. */
+#ifdef CONFIG_X86_PAE
+	for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
+	     i += PTRS_PER_PTE, j++) {
+		native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
+		- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+
+		if (copy_to_user(&pmds[j], &pmd, sizeof(pmd)) != 0)
+			return -EFAULT;
+	}
+
+	set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+	if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
+		return -EFAULT;
+	if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
+		return -EFAULT;
+#else
 	phys_linear = (unsigned long)linear - mem_base;
 	for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
 		pgd_t pgd;
@@ -633,6 +878,7 @@ static unsigned long setup_pagetables(struct lguest *lg,
 				    &pgd, sizeof(pgd)))
 			return -EFAULT;
 	}
+#endif
 
 	/* We return the top level (guest-physical) address: remember where
 	 * this is. */
@@ -648,7 +894,10 @@ int init_guest_pagetable(struct lguest *lg)
 	u64 mem;
 	u32 initrd_size;
 	struct boot_params __user *boot = (struct boot_params *)lg->mem_base;
-
+#ifdef CONFIG_X86_PAE
+	pgd_t *pgd;
+	pmd_t *pmd_table;
+#endif
 	/* Get the Guest memory size and the ramdisk size from the boot header
 	 * located at lg->mem_base (Guest address 0). */
 	if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
@@ -663,6 +912,15 @@ int init_guest_pagetable(struct lguest *lg)
 	lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	if (!lg->pgdirs[0].pgdir)
 		return -ENOMEM;
+#ifdef CONFIG_X86_PAE
+	pgd = lg->pgdirs[0].pgdir;
+	pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
+	if (!pmd_table)
+		return -ENOMEM;
+
+	set_pgd(pgd + SWITCHER_PGD_INDEX,
+		__pgd(__pa(pmd_table) | _PAGE_PRESENT));
+#endif
 	lg->cpus[0].cpu_pgd = 0;
 	return 0;
 }
@@ -672,17 +930,24 @@ void page_table_guest_data_init(struct lg_cpu *cpu)
 {
 	/* We get the kernel address: above this is all kernel memory. */
 	if (get_user(cpu->lg->kernel_address,
-		     &cpu->lg->lguest_data->kernel_address)
-	    /* We tell the Guest that it can't use the top 4MB of virtual
-	     * addresses used by the Switcher. */
-	    || put_user(4U*1024*1024, &cpu->lg->lguest_data->reserve_mem)
-	    || put_user(cpu->lg->pgdirs[0].gpgdir, &cpu->lg->lguest_data->pgdir))
+		&cpu->lg->lguest_data->kernel_address)
+		/* We tell the Guest that it can't use the top 2 or 4 MB
+		 * of virtual addresses used by the Switcher. */
+		|| put_user(RESERVE_MEM * 1024 * 1024,
+			&cpu->lg->lguest_data->reserve_mem)
+		|| put_user(cpu->lg->pgdirs[0].gpgdir,
+			&cpu->lg->lguest_data->pgdir))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
 	/* In flush_user_mappings() we loop from 0 to
 	 * "pgd_index(lg->kernel_address)".  This assumes it won't hit the
 	 * Switcher mappings, so check that now. */
+#ifdef CONFIG_X86_PAE
+	if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
+		pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
+#else
 	if (pgd_index(cpu->lg->kernel_address) >= SWITCHER_PGD_INDEX)
+#endif
 		kill_guest(cpu, "bad kernel address %#lx",
 				 cpu->lg->kernel_address);
 }
@@ -708,16 +973,30 @@ void free_guest_pagetable(struct lguest *lg)
 void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
 	pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
-	pgd_t switcher_pgd;
 	pte_t regs_pte;
 	unsigned long pfn;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t switcher_pmd;
+	pmd_t *pmd_table;
+
+	native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
+		       PAGE_SHIFT, PAGE_KERNEL_EXEC));
+
+	pmd_table = __va(pgd_pfn(cpu->lg->
+			pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
+								<< PAGE_SHIFT);
+	native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
+#else
+	pgd_t switcher_pgd;
+
 	/* Make the last PGD entry for this Guest point to the Switcher's PTE
 	 * page for this CPU (with appropriate flags). */
-	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL);
+	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
 
 	cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
 
+#endif
 	/* We also change the Switcher PTE page.  When we're running the Guest,
 	 * we want the Guest's "regs" page to appear where the first Switcher
 	 * page for this CPU is.  This is an optimization: when the Switcher
@@ -726,8 +1005,9 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 	 * page is already mapped there, we don't have to copy them out
 	 * again. */
 	pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
-	regs_pte = pfn_pte(pfn, __pgprot(__PAGE_KERNEL));
-	switcher_pte_page[(unsigned long)pages/PAGE_SIZE%PTRS_PER_PTE] = regs_pte;
+	native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
+	native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
+			regs_pte);
 }
 /*:*/
 
@@ -752,21 +1032,21 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
 
 	/* The first entries are easy: they map the Switcher code. */
 	for (i = 0; i < pages; i++) {
-		pte[i] = mk_pte(switcher_page[i],
-				__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+		native_set_pte(&pte[i], mk_pte(switcher_page[i],
+				__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 	}
 
 	/* The only other thing we map is this CPU's pair of pages. */
 	i = pages + cpu*2;
 
 	/* First page (Guest registers) is writable from the Guest */
-	pte[i] = pfn_pte(page_to_pfn(switcher_page[i]),
-			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW));
+	native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
+			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
 	/* The second page contains the "struct lguest_ro_state", and is
 	 * read-only. */
-	pte[i+1] = pfn_pte(page_to_pfn(switcher_page[i+1]),
-			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+	native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
+			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
 /* We've made it through the page table code.  Perhaps our tired brains are
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 7ede64ffeef..482ed5a1875 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -150,7 +150,7 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
 	/* We assume the Guest has the same number of GDT entries as the
 	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
-	if (num > ARRAY_SIZE(cpu->arch.gdt))
+	if (num >= ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
 	/* Set it up, then fix it. */
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c0621d50c8a..fde377c60cc 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -37,6 +37,7 @@
 #define CONFIG_REG   0x40
 #define MANUAL_MASK  0xe0
 #define AUTO_MASK    0x20
+#define INVERT_MASK  0x10
 
 static u8 TEMP_REG[3]    = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
 static u8 LIMIT_REG[3]   = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
@@ -71,7 +72,7 @@ MODULE_PARM_DESC(verbose,"Verbose log operations "
 		 "(default 0)");
 
 struct thermostat {
-	struct i2c_client	clt;
+	struct i2c_client	*clt;
 	u8			temps[3];
 	u8			cached_temp[3];
 	u8			initial_limits[3];
@@ -86,9 +87,6 @@ static struct of_device * of_dev;
 static struct thermostat* thermostat;
 static struct task_struct *thread_therm = NULL;
 
-static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
-				 int busno);
-
 static void write_both_fan_speed(struct thermostat *th, int speed);
 static void write_fan_speed(struct thermostat *th, int speed, int fan);
 
@@ -100,7 +98,7 @@ write_reg(struct thermostat* th, int reg, u8 data)
 	
 	tmp[0] = reg;
 	tmp[1] = data;
-	rc = i2c_master_send(&th->clt, (const char *)tmp, 2);
+	rc = i2c_master_send(th->clt, (const char *)tmp, 2);
 	if (rc < 0)
 		return rc;
 	if (rc != 2)
@@ -115,12 +113,12 @@ read_reg(struct thermostat* th, int reg)
 	int rc;
 
 	reg_addr = (u8)reg;
-	rc = i2c_master_send(&th->clt, &reg_addr, 1);
+	rc = i2c_master_send(th->clt, &reg_addr, 1);
 	if (rc < 0)
 		return rc;
 	if (rc != 1)
 		return -ENODEV;
-	rc = i2c_master_recv(&th->clt, (char *)&data, 1);
+	rc = i2c_master_recv(th->clt, (char *)&data, 1);
 	if (rc < 0)
 		return rc;
 	return data;
@@ -130,26 +128,36 @@ static int
 attach_thermostat(struct i2c_adapter *adapter)
 {
 	unsigned long bus_no;
+	struct i2c_board_info info;
+	struct i2c_client *client;
 
 	if (strncmp(adapter->name, "uni-n", 5))
 		return -ENODEV;
 	bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
 	if (bus_no != therm_bus)
 		return -ENODEV;
-	return attach_one_thermostat(adapter, therm_address, bus_no);
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
+	info.addr = therm_address;
+	client = i2c_new_device(adapter, &info);
+	if (!client)
+		return -ENODEV;
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return 0;
 }
 
 static int
-detach_thermostat(struct i2c_adapter *adapter)
+remove_thermostat(struct i2c_client *client)
 {
-	struct thermostat* th;
+	struct thermostat *th = i2c_get_clientdata(client);
 	int i;
 	
-	if (thermostat == NULL)
-		return 0;
-
-	th = thermostat;
-
 	if (thread_therm != NULL) {
 		kthread_stop(thread_therm);
 	}
@@ -165,8 +173,6 @@ detach_thermostat(struct i2c_adapter *adapter)
 
 	write_both_fan_speed(th, -1);
 
-	i2c_detach_client(&th->clt);
-
 	thermostat = NULL;
 
 	kfree(th);
@@ -174,14 +180,6 @@ detach_thermostat(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static struct i2c_driver thermostat_driver = {  
-	.driver = {
-		.name	= "therm_adt746x",
-	},
-	.attach_adapter	= attach_thermostat,
-	.detach_adapter	= detach_thermostat,
-};
-
 static int read_fan_speed(struct thermostat *th, u8 addr)
 {
 	u8 tmp[2];
@@ -229,7 +227,8 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
 	
 	if (speed >= 0) {
 		manual = read_reg(th, MANUAL_MODE[fan]);
-		write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
+		write_reg(th, MANUAL_MODE[fan],
+			(manual|MANUAL_MASK) & (~INVERT_MASK));
 		write_reg(th, FAN_SPD_SET[fan], speed);
 	} else {
 		/* back to automatic */
@@ -369,8 +368,8 @@ static void set_limit(struct thermostat *th, int i)
 		th->limits[i] = default_limits_local[i] + limit_adjust;
 }
 
-static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
-				 int busno)
+static int probe_thermostat(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
 	struct thermostat* th;
 	int rc;
@@ -383,16 +382,12 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
 	if (!th)
 		return -ENOMEM;
 
-	th->clt.addr = addr;
-	th->clt.adapter = adapter;
-	th->clt.driver = &thermostat_driver;
-	strcpy(th->clt.name, "thermostat");
+	i2c_set_clientdata(client, th);
+	th->clt = client;
 
 	rc = read_reg(th, 0);
 	if (rc < 0) {
-		printk(KERN_ERR "adt746x: Thermostat failed to read config "
-				"from bus %d !\n",
-				busno);
+		dev_err(&client->dev, "Thermostat failed to read config!\n");
 		kfree(th);
 		return -ENODEV;
 	}
@@ -421,14 +416,6 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
 
 	thermostat = th;
 
-	if (i2c_attach_client(&th->clt)) {
-		printk(KERN_INFO "adt746x: Thermostat failed to attach "
-				 "client !\n");
-		thermostat = NULL;
-		kfree(th);
-		return -ENODEV;
-	}
-
 	/* be sure to really write fan speed the first time */
 	th->last_speed[0] = -2;
 	th->last_speed[1] = -2;
@@ -454,6 +441,21 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
 	return 0;
 }
 
+static const struct i2c_device_id therm_adt746x_id[] = {
+	{ "therm_adt746x", 0 },
+	{ }
+};
+
+static struct i2c_driver thermostat_driver = {
+	.driver = {
+		.name	= "therm_adt746x",
+	},
+	.attach_adapter	= attach_thermostat,
+	.probe = probe_thermostat,
+	.remove = remove_thermostat,
+	.id_table = therm_adt746x_id,
+};
+
 /* 
  * Now, unfortunately, sysfs doesn't give us a nice void * we could
  * pass around to the attribute functions, so we don't really have
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 817607e2af6..a028598af2d 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -287,22 +287,6 @@ struct fcu_fan_table	fcu_fans[] = {
 };
 
 /*
- * i2c_driver structure to attach to the host i2c controller
- */
-
-static int therm_pm72_attach(struct i2c_adapter *adapter);
-static int therm_pm72_detach(struct i2c_adapter *adapter);
-
-static struct i2c_driver therm_pm72_driver =
-{
-	.driver = {
-		.name	= "therm_pm72",
-	},
-	.attach_adapter	= therm_pm72_attach,
-	.detach_adapter	= therm_pm72_detach,
-};
-
-/*
  * Utility function to create an i2c_client structure and
  * attach it to one of u3 adapters
  */
@@ -310,6 +294,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
 {
 	struct i2c_client *clt;
 	struct i2c_adapter *adap;
+	struct i2c_board_info info;
 
 	if (id & 0x200)
 		adap = k2;
@@ -320,31 +305,21 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
 	if (adap == NULL)
 		return NULL;
 
-	clt = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (clt == NULL)
-		return NULL;
-
-	clt->addr = (id >> 1) & 0x7f;
-	clt->adapter = adap;
-	clt->driver = &therm_pm72_driver;
-	strncpy(clt->name, name, I2C_NAME_SIZE-1);
-
-	if (i2c_attach_client(clt)) {
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = (id >> 1) & 0x7f;
+	strlcpy(info.type, "therm_pm72", I2C_NAME_SIZE);
+	clt = i2c_new_device(adap, &info);
+	if (!clt) {
 		printk(KERN_ERR "therm_pm72: Failed to attach to i2c ID 0x%x\n", id);
-		kfree(clt);
 		return NULL;
 	}
-	return clt;
-}
 
-/*
- * Utility function to get rid of the i2c_client structure
- * (will also detach from the adapter hopepfully)
- */
-static void detach_i2c_chip(struct i2c_client *clt)
-{
-	i2c_detach_client(clt);
-	kfree(clt);
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&clt->detected, &clt->driver->clients);
+	return clt;
 }
 
 /*
@@ -1203,8 +1178,6 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
 
 	return 0;
  fail:
-	if (state->monitor)
-		detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 	
 	return -ENODEV;
@@ -1232,7 +1205,6 @@ static void dispose_cpu_state(struct cpu_pid_state *state)
 		device_remove_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
 	}
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -1407,7 +1379,6 @@ static void dispose_backside_state(struct backside_pid_state *state)
 	device_remove_file(&of_dev->dev, &dev_attr_backside_temperature);
 	device_remove_file(&of_dev->dev, &dev_attr_backside_fan_pwm);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
  
@@ -1532,7 +1503,6 @@ static void dispose_drives_state(struct drives_pid_state *state)
 	device_remove_file(&of_dev->dev, &dev_attr_drives_temperature);
 	device_remove_file(&of_dev->dev, &dev_attr_drives_fan_rpm);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -1654,7 +1624,6 @@ static void dispose_dimms_state(struct dimm_pid_state *state)
 
 	device_remove_file(&of_dev->dev, &dev_attr_dimms_temperature);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -1779,7 +1748,6 @@ static void dispose_slots_state(struct slots_pid_state *state)
 	device_remove_file(&of_dev->dev, &dev_attr_slots_temperature);
 	device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -2008,8 +1976,6 @@ static int attach_fcu(void)
  */
 static void detach_fcu(void)
 {
-	if (fcu)
-		detach_i2c_chip(fcu);
 	fcu = NULL;
 }
 
@@ -2060,12 +2026,21 @@ static int therm_pm72_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
+static int therm_pm72_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	/* Always succeed, the real work was done in therm_pm72_attach() */
+	return 0;
+}
+
 /*
- * Called on every adapter when the driver or the i2c controller
+ * Called when any of the devices which participates into thermal management
  * is going away.
  */
-static int therm_pm72_detach(struct i2c_adapter *adapter)
+static int therm_pm72_remove(struct i2c_client *client)
 {
+	struct i2c_adapter *adapter = client->adapter;
+
 	mutex_lock(&driver_lock);
 
 	if (state != state_detached)
@@ -2096,6 +2071,30 @@ static int therm_pm72_detach(struct i2c_adapter *adapter)
 	return 0;
 }
 
+/*
+ * i2c_driver structure to attach to the host i2c controller
+ */
+
+static const struct i2c_device_id therm_pm72_id[] = {
+	/*
+	 * Fake device name, thermal management is done by several
+	 * chips but we don't need to differentiate between them at
+	 * this point.
+	 */
+	{ "therm_pm72", 0 },
+	{ }
+};
+
+static struct i2c_driver therm_pm72_driver = {
+	.driver = {
+		.name	= "therm_pm72",
+	},
+	.attach_adapter	= therm_pm72_attach,
+	.probe		= therm_pm72_probe,
+	.remove		= therm_pm72_remove,
+	.id_table	= therm_pm72_id,
+};
+
 static int fan_check_loc_match(const char *loc, int fan)
 {
 	char	tmp[64];
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 3da0a02efd7..40023313a76 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -48,16 +48,6 @@
 
 #define LOG_TEMP		0			/* continously log temperature */
 
-static int 			do_probe( struct i2c_adapter *adapter, int addr, int kind);
-
-/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
-static const unsigned short	normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
-						 0x4c, 0x4d, 0x4e, 0x4f,
-						 0x2c, 0x2d, 0x2e, 0x2f,
-						 I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static struct {
 	volatile int		running;
 	struct task_struct	*poll_task;
@@ -315,53 +305,54 @@ static int control_loop(void *dummy)
 static int
 do_attach( struct i2c_adapter *adapter )
 {
-	int ret = 0;
+	/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
+	static const unsigned short scan_ds1775[] = {
+		0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+		I2C_CLIENT_END
+	};
+	static const unsigned short scan_adm1030[] = {
+		0x2c, 0x2d, 0x2e, 0x2f,
+		I2C_CLIENT_END
+	};
 
 	if( strncmp(adapter->name, "uni-n", 5) )
 		return 0;
 
 	if( !x.running ) {
-		ret = i2c_probe( adapter, &addr_data, &do_probe );
+		struct i2c_board_info info;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
+		i2c_new_probed_device(adapter, &info, scan_ds1775);
+
+		strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
+		i2c_new_probed_device(adapter, &info, scan_adm1030);
+
 		if( x.thermostat && x.fan ) {
 			x.running = 1;
 			x.poll_task = kthread_run(control_loop, NULL, "g4fand");
 		}
 	}
-	return ret;
+	return 0;
 }
 
 static int
-do_detach( struct i2c_client *client )
+do_remove(struct i2c_client *client)
 {
-	int err;
-
-	if( (err=i2c_detach_client(client)) )
-		printk(KERN_ERR "failed to detach thermostat client\n");
-	else {
-		if( x.running ) {
-			x.running = 0;
-			kthread_stop(x.poll_task);
-			x.poll_task = NULL;
-		}
-		if( client == x.thermostat )
-			x.thermostat = NULL;
-		else if( client == x.fan )
-			x.fan = NULL;
-		else {
-			printk(KERN_ERR "g4fan: bad client\n");
-		}
-		kfree( client );
+	if (x.running) {
+		x.running = 0;
+		kthread_stop(x.poll_task);
+		x.poll_task = NULL;
 	}
-	return err;
-}
+	if (client == x.thermostat)
+		x.thermostat = NULL;
+	else if (client == x.fan)
+		x.fan = NULL;
+	else
+		printk(KERN_ERR "g4fan: bad client\n");
 
-static struct i2c_driver g4fan_driver = {  
-	.driver = {
-		.name	= "therm_windtunnel",
-	},
-	.attach_adapter = do_attach,
-	.detach_client	= do_detach,
-};
+	return 0;
+}
 
 static int
 attach_fan( struct i2c_client *cl )
@@ -374,13 +365,8 @@ attach_fan( struct i2c_client *cl )
 		goto out;
 	printk("ADM1030 fan controller [@%02x]\n", cl->addr );
 
-	strlcpy( cl->name, "ADM1030 fan controller", sizeof(cl->name) );
-
-	if( !i2c_attach_client(cl) )
-		x.fan = cl;
+	x.fan = cl;
  out:
-	if( cl != x.fan )
-		kfree( cl );
 	return 0;
 }
 
@@ -412,39 +398,47 @@ attach_thermostat( struct i2c_client *cl )
 	x.temp = temp;
 	x.overheat_temp = os_temp;
 	x.overheat_hyst = hyst_temp;
-	
-	strlcpy( cl->name, "DS1775 thermostat", sizeof(cl->name) );
-
-	if( !i2c_attach_client(cl) )
-		x.thermostat = cl;
+	x.thermostat = cl;
 out:
-	if( cl != x.thermostat )
-		kfree( cl );
 	return 0;
 }
 
+enum chip { ds1775, adm1030 };
+
+static const struct i2c_device_id therm_windtunnel_id[] = {
+	{ "therm_ds1775", ds1775 },
+	{ "therm_adm1030", adm1030 },
+	{ }
+};
+
 static int
-do_probe( struct i2c_adapter *adapter, int addr, int kind )
+do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
-	struct i2c_client *cl;
+	struct i2c_adapter *adapter = cl->adapter;
 
 	if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
 				     | I2C_FUNC_SMBUS_WRITE_BYTE) )
 		return 0;
 
-	if( !(cl=kzalloc(sizeof(*cl), GFP_KERNEL)) )
-		return -ENOMEM;
-
-	cl->addr = addr;
-	cl->adapter = adapter;
-	cl->driver = &g4fan_driver;
-	cl->flags = 0;
-
-	if( addr < 0x48 )
+	switch (id->driver_data) {
+	case adm1030:
 		return attach_fan( cl );
-	return attach_thermostat( cl );
+	case ds1775:
+		return attach_thermostat(cl);
+	}
+	return 0;
 }
 
+static struct i2c_driver g4fan_driver = {
+	.driver = {
+		.name	= "therm_windtunnel",
+	},
+	.attach_adapter = do_attach,
+	.probe		= do_probe,
+	.remove		= do_remove,
+	.id_table	= therm_windtunnel_id,
+};
+
 
 /************************************************************************/
 /*	initialization / cleanup					*/
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index b92b959fe16..529886c7a82 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -37,34 +37,22 @@
 struct wf_lm75_sensor {
 	int			ds1775 : 1;
 	int			inited : 1;
-	struct 	i2c_client	i2c;
+	struct 	i2c_client	*i2c;
 	struct 	wf_sensor	sens;
 };
 #define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
-#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
-
-static int wf_lm75_attach(struct i2c_adapter *adapter);
-static int wf_lm75_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_lm75_driver = {
-	.driver = {
-		.name	= "wf_lm75",
-	},
-	.attach_adapter	= wf_lm75_attach,
-	.detach_client	= wf_lm75_detach,
-};
 
 static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
 {
 	struct wf_lm75_sensor *lm = wf_to_lm75(sr);
 	s32 data;
 
-	if (lm->i2c.adapter == NULL)
+	if (lm->i2c == NULL)
 		return -ENODEV;
 
 	/* Init chip if necessary */
 	if (!lm->inited) {
-		u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1);
+		u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
 
 		DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
 		    sr->name, cfg);
@@ -73,7 +61,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
 		 * the firmware for now
 		 */
 		cfg_new = cfg & ~0x01;
-		i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new);
+		i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
 		lm->inited = 1;
 
 		/* If we just powered it up, let's wait 200 ms */
@@ -81,7 +69,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
 	}
 
 	/* Read temperature register */
-	data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0));
+	data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
 	data <<= 8;
 	*value = data;
 
@@ -92,12 +80,6 @@ static void wf_lm75_release(struct wf_sensor *sr)
 {
 	struct wf_lm75_sensor *lm = wf_to_lm75(sr);
 
-	/* check if client is registered and detach from i2c */
-	if (lm->i2c.adapter) {
-		i2c_detach_client(&lm->i2c);
-		lm->i2c.adapter = NULL;
-	}
-
 	kfree(lm);
 }
 
@@ -107,59 +89,77 @@ static struct wf_sensor_ops wf_lm75_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
-					     u8 addr, int ds1775,
-					     const char *loc)
+static int wf_lm75_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
 	struct wf_lm75_sensor *lm;
 	int rc;
 
-	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
-	    ds1775 ? "ds1775" : "lm75", addr);
-
 	lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
 	if (lm == NULL)
-		return NULL;
+		return -ENODEV;
+
+	lm->inited = 0;
+	lm->ds1775 = id->driver_data;
+	lm->i2c = client;
+	lm->sens.name = client->dev.platform_data;
+	lm->sens.ops = &wf_lm75_ops;
+	i2c_set_clientdata(client, lm);
+
+	rc = wf_register_sensor(&lm->sens);
+	if (rc) {
+		i2c_set_clientdata(client, NULL);
+		kfree(lm);
+	}
+
+	return rc;
+}
+
+static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
+					     u8 addr, int ds1775,
+					     const char *loc)
+{
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	char *name;
+
+	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
+	    ds1775 ? "ds1775" : "lm75", addr);
 
 	/* Usual rant about sensor names not beeing very consistent in
 	 * the device-tree, oh well ...
 	 * Add more entries below as you deal with more setups
 	 */
 	if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
-		lm->sens.name = "hd-temp";
+		name = "hd-temp";
 	else if (!strcmp(loc, "Incoming Air Temp"))
-		lm->sens.name = "incoming-air-temp";
+		name = "incoming-air-temp";
 	else if (!strcmp(loc, "ODD Temp"))
-		lm->sens.name = "optical-drive-temp";
+		name = "optical-drive-temp";
 	else if (!strcmp(loc, "HD Temp"))
-		lm->sens.name = "hard-drive-temp";
+		name = "hard-drive-temp";
 	else
 		goto fail;
 
-	lm->inited = 0;
-	lm->sens.ops = &wf_lm75_ops;
-	lm->ds1775 = ds1775;
-	lm->i2c.addr = (addr >> 1) & 0x7f;
-	lm->i2c.adapter = adapter;
-	lm->i2c.driver = &wf_lm75_driver;
-	strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
-
-	rc = i2c_attach_client(&lm->i2c);
-	if (rc) {
-		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
-		       " err %d\n", ds1775 ? "ds1775" : "lm75",
-		       lm->i2c.name, rc);
-		goto fail;
-	}
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = (addr >> 1) & 0x7f;
+	info.platform_data = name;
+	strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE);
 
-	if (wf_register_sensor(&lm->sens)) {
-		i2c_detach_client(&lm->i2c);
+	client = i2c_new_device(adapter, &info);
+	if (client == NULL) {
+		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
+		       ds1775 ? "ds1775" : "lm75", name);
 		goto fail;
 	}
 
-	return lm;
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return client;
  fail:
-	kfree(lm);
 	return NULL;
 }
 
@@ -202,21 +202,38 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int wf_lm75_detach(struct i2c_client *client)
+static int wf_lm75_remove(struct i2c_client *client)
 {
-	struct wf_lm75_sensor *lm = i2c_to_lm75(client);
+	struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
 
 	DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
 
 	/* Mark client detached */
-	lm->i2c.adapter = NULL;
+	lm->i2c = NULL;
 
 	/* release sensor */
 	wf_unregister_sensor(&lm->sens);
 
+	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
+static const struct i2c_device_id wf_lm75_id[] = {
+	{ "wf_lm75", 0 },
+	{ "wf_ds1775", 1 },
+	{ }
+};
+
+static struct i2c_driver wf_lm75_driver = {
+	.driver = {
+		.name	= "wf_lm75",
+	},
+	.attach_adapter	= wf_lm75_attach,
+	.probe		= wf_lm75_probe,
+	.remove		= wf_lm75_remove,
+	.id_table	= wf_lm75_id,
+};
+
 static int __init wf_lm75_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index e207a90d6b2..e2a55ecda2b 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -26,34 +26,22 @@
 #define MAX6690_EXTERNAL_TEMP	1
 
 struct wf_6690_sensor {
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	struct wf_sensor	sens;
 };
 
 #define wf_to_6690(x)	container_of((x), struct wf_6690_sensor, sens)
-#define i2c_to_6690(x)	container_of((x), struct wf_6690_sensor, i2c)
-
-static int wf_max6690_attach(struct i2c_adapter *adapter);
-static int wf_max6690_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_max6690_driver = {
-	.driver = {
-		.name		= "wf_max6690",
-	},
-	.attach_adapter	= wf_max6690_attach,
-	.detach_client	= wf_max6690_detach,
-};
 
 static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
 {
 	struct wf_6690_sensor *max = wf_to_6690(sr);
 	s32 data;
 
-	if (max->i2c.adapter == NULL)
+	if (max->i2c == NULL)
 		return -ENODEV;
 
 	/* chip gets initialized by firmware */
-	data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP);
+	data = i2c_smbus_read_byte_data(max->i2c, MAX6690_EXTERNAL_TEMP);
 	if (data < 0)
 		return data;
 	*value = data << 16;
@@ -64,10 +52,6 @@ static void wf_max6690_release(struct wf_sensor *sr)
 {
 	struct wf_6690_sensor *max = wf_to_6690(sr);
 
-	if (max->i2c.adapter) {
-		i2c_detach_client(&max->i2c);
-		max->i2c.adapter = NULL;
-	}
 	kfree(max);
 }
 
@@ -77,19 +61,40 @@ static struct wf_sensor_ops wf_max6690_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
-			      const char *loc)
+static int wf_max6690_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
 	struct wf_6690_sensor *max;
-	char *name;
+	int rc;
 
 	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
 	if (max == NULL) {
-		printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
-		       "no memory\n", loc);
-		return;
+		printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: "
+		       "no memory\n");
+		return -ENOMEM;
+	}
+
+	max->i2c = client;
+	max->sens.name = client->dev.platform_data;
+	max->sens.ops = &wf_max6690_ops;
+	i2c_set_clientdata(client, max);
+
+	rc = wf_register_sensor(&max->sens);
+	if (rc) {
+		i2c_set_clientdata(client, NULL);
+		kfree(max);
 	}
 
+	return rc;
+}
+
+static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
+					    u8 addr, const char *loc)
+{
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	char *name;
+
 	if (!strcmp(loc, "BACKSIDE"))
 		name = "backside-temp";
 	else if (!strcmp(loc, "NB Ambient"))
@@ -99,27 +104,26 @@ static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
 	else
 		goto fail;
 
-	max->sens.ops = &wf_max6690_ops;
-	max->sens.name = name;
-	max->i2c.addr = addr >> 1;
-	max->i2c.adapter = adapter;
-	max->i2c.driver = &wf_max6690_driver;
-	strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = addr >> 1;
+	info.platform_data = name;
+	strlcpy(info.type, "wf_max6690", I2C_NAME_SIZE);
 
-	if (i2c_attach_client(&max->i2c)) {
+	client = i2c_new_device(adapter, &info);
+	if (client == NULL) {
 		printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
 		goto fail;
 	}
 
-	if (wf_register_sensor(&max->sens)) {
-		i2c_detach_client(&max->i2c);
-		goto fail;
-	}
-
-	return;
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return client;
 
  fail:
-	kfree(max);
+	return NULL;
 }
 
 static int wf_max6690_attach(struct i2c_adapter *adapter)
@@ -154,16 +158,31 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int wf_max6690_detach(struct i2c_client *client)
+static int wf_max6690_remove(struct i2c_client *client)
 {
-	struct wf_6690_sensor *max = i2c_to_6690(client);
+	struct wf_6690_sensor *max = i2c_get_clientdata(client);
 
-	max->i2c.adapter = NULL;
+	max->i2c = NULL;
 	wf_unregister_sensor(&max->sens);
 
 	return 0;
 }
 
+static const struct i2c_device_id wf_max6690_id[] = {
+	{ "wf_max6690", 0 },
+	{ }
+};
+
+static struct i2c_driver wf_max6690_driver = {
+	.driver = {
+		.name		= "wf_max6690",
+	},
+	.attach_adapter	= wf_max6690_attach,
+	.probe		= wf_max6690_probe,
+	.remove		= wf_max6690_remove,
+	.id_table	= wf_max6690_id,
+};
+
 static int __init wf_max6690_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 7847e981ac3..5da729e58f9 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -39,7 +39,7 @@ struct wf_sat {
 	struct mutex		mutex;
 	unsigned long		last_read; /* jiffies when cache last updated */
 	u8			cache[16];
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	struct device_node	*node;
 };
 
@@ -54,18 +54,6 @@ struct wf_sat_sensor {
 };
 
 #define wf_to_sat(c)	container_of(c, struct wf_sat_sensor, sens)
-#define i2c_to_sat(c)	container_of(c, struct wf_sat, i2c)
-
-static int wf_sat_attach(struct i2c_adapter *adapter);
-static int wf_sat_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_sat_driver = {
-	.driver = {
-		.name		= "wf_smu_sat",
-	},
-	.attach_adapter	= wf_sat_attach,
-	.detach_client	= wf_sat_detach,
-};
 
 struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 						  unsigned int *size)
@@ -81,13 +69,13 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 	if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
 		return NULL;
 
-	err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8);
+	err = i2c_smbus_write_word_data(sat->i2c, 8, id << 8);
 	if (err) {
 		printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
 		return NULL;
 	}
 
-	err = i2c_smbus_read_word_data(&sat->i2c, 9);
+	err = i2c_smbus_read_word_data(sat->i2c, 9);
 	if (err < 0) {
 		printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
 		return NULL;
@@ -105,7 +93,7 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 		return NULL;
 
 	for (i = 0; i < len; i += 4) {
-		err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data);
+		err = i2c_smbus_read_i2c_block_data(sat->i2c, 0xa, 4, data);
 		if (err < 0) {
 			printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
 			       err);
@@ -138,7 +126,7 @@ static int wf_sat_read_cache(struct wf_sat *sat)
 {
 	int err;
 
-	err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache);
+	err = i2c_smbus_read_i2c_block_data(sat->i2c, 0x3f, 16, sat->cache);
 	if (err < 0)
 		return err;
 	sat->last_read = jiffies;
@@ -161,7 +149,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
 	int i, err;
 	s32 val;
 
-	if (sat->i2c.adapter == NULL)
+	if (sat->i2c == NULL)
 		return -ENODEV;
 
 	mutex_lock(&sat->mutex);
@@ -193,10 +181,6 @@ static void wf_sat_release(struct wf_sensor *sr)
 	struct wf_sat *sat = sens->sat;
 
 	if (atomic_dec_and_test(&sat->refcnt)) {
-		if (sat->i2c.adapter) {
-			i2c_detach_client(&sat->i2c);
-			sat->i2c.adapter = NULL;
-		}
 		if (sat->nr >= 0)
 			sats[sat->nr] = NULL;
 		kfree(sat);
@@ -212,38 +196,58 @@ static struct wf_sensor_ops wf_sat_ops = {
 
 static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 {
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	const u32 *reg;
+	u8 addr;
+
+	reg = of_get_property(dev, "reg", NULL);
+	if (reg == NULL)
+		return;
+	addr = *reg;
+	DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = (addr >> 1) & 0x7f;
+	info.platform_data = dev;
+	strlcpy(info.type, "wf_sat", I2C_NAME_SIZE);
+
+	client = i2c_new_device(adapter, &info);
+	if (client == NULL) {
+		printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
+		return;
+	}
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+}
+
+static int wf_sat_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device_node *dev = client->dev.platform_data;
 	struct wf_sat *sat;
 	struct wf_sat_sensor *sens;
 	const u32 *reg;
 	const char *loc, *type;
-	u8 addr, chip, core;
+	u8 chip, core;
 	struct device_node *child;
 	int shift, cpu, index;
 	char *name;
 	int vsens[2], isens[2];
 
-	reg = of_get_property(dev, "reg", NULL);
-	if (reg == NULL)
-		return;
-	addr = *reg;
-	DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
-
 	sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
 	if (sat == NULL)
-		return;
+		return -ENOMEM;
 	sat->nr = -1;
 	sat->node = of_node_get(dev);
 	atomic_set(&sat->refcnt, 0);
 	mutex_init(&sat->mutex);
-	sat->i2c.addr = (addr >> 1) & 0x7f;
-	sat->i2c.adapter = adapter;
-	sat->i2c.driver = &wf_sat_driver;
-	strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
-
-	if (i2c_attach_client(&sat->i2c)) {
-		printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
-		goto fail;
-	}
+	sat->i2c = client;
+	i2c_set_clientdata(client, sat);
 
 	vsens[0] = vsens[1] = -1;
 	isens[0] = isens[1] = -1;
@@ -344,10 +348,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 	if (sat->nr >= 0)
 		sats[sat->nr] = sat;
 
-	return;
-
- fail:
-	kfree(sat);
+	return 0;
 }
 
 static int wf_sat_attach(struct i2c_adapter *adapter)
@@ -366,16 +367,32 @@ static int wf_sat_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int wf_sat_detach(struct i2c_client *client)
+static int wf_sat_remove(struct i2c_client *client)
 {
-	struct wf_sat *sat = i2c_to_sat(client);
+	struct wf_sat *sat = i2c_get_clientdata(client);
 
 	/* XXX TODO */
 
-	sat->i2c.adapter = NULL;
+	sat->i2c = NULL;
+	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
+static const struct i2c_device_id wf_sat_id[] = {
+	{ "wf_sat", 0 },
+	{ }
+};
+
+static struct i2c_driver wf_sat_driver = {
+	.driver = {
+		.name		= "wf_smu_sat",
+	},
+	.attach_adapter	= wf_sat_attach,
+	.probe		= wf_sat_probe,
+	.remove		= wf_sat_remove,
+	.id_table	= wf_sat_id,
+};
+
 static int __init sat_sensors_init(void)
 {
 	return i2c_add_driver(&wf_sat_driver);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3fd8b1e6548..48db308fae6 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -19,7 +19,6 @@
 #include <linux/slab.h>
 #include <linux/idr.h>
 #include <linux/hdreg.h>
-#include <linux/blktrace_api.h>
 
 #include <trace/events/block.h>
 
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 60955a70d88..1bb66e1ed5a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
 	help
 	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
 	  firmware protocol used by this module is similar to the one used by the
-	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
 
 config DVB_USB_DTT200U
 	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2fb01..57835f5715f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -758,10 +758,14 @@ config VIDEO_MX1
 	---help---
 	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 
+config MX3_VIDEO
+	bool
+
 config VIDEO_MX3
 	tristate "i.MX3x Camera Sensor Interface driver"
 	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
+	select MX3_VIDEO
 	---help---
 	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 3e6ffee8dfe..ccd47f57f42 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -181,7 +181,7 @@ static int hdpvr_submit_buffers(struct hdpvr_device *dev)
 				 buff_list);
 		if (buf->status != BUFSTAT_AVAILABLE) {
 			v4l2_err(&dev->v4l2_dev,
-				 "buffer not marked as availbale\n");
+				 "buffer not marked as available\n");
 			ret = -EFAULT;
 			goto err;
 		}
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 693e4b51135..fa9249b4971 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -130,7 +130,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -190,7 +190,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notificaiton.
+ *                      asynchronous notification.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -623,7 +623,7 @@ mpi_fc.h
  *  11-02-00  01.01.01  Original release for post 1.0 work
  *  12-04-00  01.01.02  Added messages for Common Transport Send and
  *                      Primitive Send.
- *  01-09-01  01.01.03  Modifed some of the new flags to have an MPI prefix
+ *  01-09-01  01.01.03  Modified some of the new flags to have an MPI prefix
  *                      and modified the FcPrimitiveSend flags.
  *  01-25-01  01.01.04  Move InitiatorIndex in LinkServiceRsp reply to a larger
  *                      field.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d496a99e03..0df065275cd 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -146,7 +146,6 @@ static MPT_EVHANDLER		 MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 static MPT_RESETHANDLER		 MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 static struct mpt_pci_driver 	*MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 
-static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq);
 
 /*
  *  Driver Callback Index's
@@ -159,7 +158,8 @@ static u8 last_drv_idx;
  *  Forward protos...
  */
 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
-static int	mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
+static int	mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+		MPT_FRAME_HDR *reply);
 static int	mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
 			u32 *req, int replyBytes, u16 *u16reply, int maxwait,
 			int sleepFlag);
@@ -190,9 +190,9 @@ static int	mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
 static int	mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
 static void 	mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
 static void 	mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
-static void	mpt_timer_expired(unsigned long data);
 static void	mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
-static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
+static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
+	int sleepFlag);
 static int	SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
 static int	mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
 static int	mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
@@ -207,8 +207,8 @@ static int	procmpt_iocinfo_read(char *buf, char **start, off_t offset,
 #endif
 static void	mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
 
-//int		mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
-static int	ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
+static int	ProcessEventNotification(MPT_ADAPTER *ioc,
+		EventNotificationReply_t *evReply, int *evHandlers);
 static void	mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
 static void	mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 static void	mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
@@ -277,6 +277,56 @@ mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
 }
 
 /**
+ * mpt_is_discovery_complete - determine if discovery has completed
+ * @ioc: per adatper instance
+ *
+ * Returns 1 when discovery completed, else zero.
+ */
+static int
+mpt_is_discovery_complete(MPT_ADAPTER *ioc)
+{
+	ConfigExtendedPageHeader_t hdr;
+	CONFIGPARMS cfg;
+	SasIOUnitPage0_t *buffer;
+	dma_addr_t dma_handle;
+	int rc = 0;
+
+	memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
+	memset(&cfg, 0, sizeof(CONFIGPARMS));
+	hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+	hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	cfg.cfghdr.ehdr = &hdr;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if ((mpt_config(ioc, &cfg)))
+		goto out;
+	if (!hdr.ExtPageLength)
+		goto out;
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+	    &dma_handle);
+	if (!buffer)
+		goto out;
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+	if ((mpt_config(ioc, &cfg)))
+		goto out_free_consistent;
+
+	if (!(buffer->PhyData[0].PortFlags &
+	    MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
+		rc = 1;
+
+ out_free_consistent:
+	pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+	    buffer, dma_handle);
+ out:
+	return rc;
+}
+
+/**
  *	mpt_fault_reset_work - work performed on workq after ioc fault
  *	@work: input argument, used to derive ioc
  *
@@ -290,7 +340,7 @@ mpt_fault_reset_work(struct work_struct *work)
 	int		 rc;
 	unsigned long	 flags;
 
-	if (ioc->diagPending || !ioc->active)
+	if (ioc->ioc_reset_in_progress || !ioc->active)
 		goto out;
 
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
@@ -307,6 +357,12 @@ mpt_fault_reset_work(struct work_struct *work)
 			printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
 			    "reset (%04xh)\n", ioc->name, ioc_raw_state &
 			    MPI_DOORBELL_DATA_MASK);
+	} else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
+		if ((mpt_is_discovery_complete(ioc))) {
+			devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
+			    "discovery_quiesce_io flag\n", ioc->name));
+			ioc->sas_discovery_quiesce_io = 0;
+		}
 	}
 
  out:
@@ -317,11 +373,11 @@ mpt_fault_reset_work(struct work_struct *work)
 		ioc = ioc->alt_ioc;
 
 	/* rearm the timer */
-	spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	if (ioc->reset_work_q)
 		queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
 			msecs_to_jiffies(MPT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 }
 
 
@@ -501,9 +557,9 @@ mpt_interrupt(int irq, void *bus_id)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mpt_base_reply - MPT base driver's callback routine
+ *	mptbase_reply - MPT base driver's callback routine
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@mf: Pointer to original MPT request frame
+ *	@req: Pointer to original MPT request frame
  *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
  *
  *	MPT base driver's callback routine; all base driver
@@ -514,122 +570,49 @@ mpt_interrupt(int irq, void *bus_id)
  *	should be freed, or 0 if it shouldn't.
  */
 static int
-mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
+mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 {
+	EventNotificationReply_t *pEventReply;
+	u8 event;
+	int evHandlers;
 	int freereq = 1;
-	u8 func;
 
-	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply() called\n", ioc->name));
-#ifdef CONFIG_FUSION_LOGGING
-	if ((ioc->debug_level & MPT_DEBUG_MSG_FRAME) &&
-			!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
-		dmfprintk(ioc, printk(MYIOC_s_INFO_FMT ": Original request frame (@%p) header\n",
-		    ioc->name, mf));
-		DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)mf);
-	}
-#endif
-
-	func = reply->u.hdr.Function;
-	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, Function=%02Xh\n",
-			ioc->name, func));
-
-	if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
-		EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply;
-		int evHandlers = 0;
-		int results;
-
-		results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
-		if (results != evHandlers) {
-			/* CHECKME! Any special handling needed here? */
-			devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
-					ioc->name, evHandlers, results));
-		}
-
-		/*
-		 *	Hmmm...  It seems that EventNotificationReply is an exception
-		 *	to the rule of one reply per request.
-		 */
-		if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
+	switch (reply->u.hdr.Function) {
+	case MPI_FUNCTION_EVENT_NOTIFICATION:
+		pEventReply = (EventNotificationReply_t *)reply;
+		evHandlers = 0;
+		ProcessEventNotification(ioc, pEventReply, &evHandlers);
+		event = le32_to_cpu(pEventReply->Event) & 0xFF;
+		if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
 			freereq = 0;
-		} else {
-			devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
-				ioc->name, pEvReply));
-		}
-
-#ifdef CONFIG_PROC_FS
-//		LogEvent(ioc, pEvReply);
-#endif
-
-	} else if (func == MPI_FUNCTION_EVENT_ACK) {
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, EventAck reply received\n",
-				ioc->name));
-	} else if (func == MPI_FUNCTION_CONFIG) {
-		CONFIGPARMS *pCfg;
-		unsigned long flags;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "config_complete (mf=%p,mr=%p)\n",
-				ioc->name, mf, reply));
-
-		pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *)));
-
-		if (pCfg) {
-			/* disable timer and remove from linked list */
-			del_timer(&pCfg->timer);
-
-			spin_lock_irqsave(&ioc->FreeQlock, flags);
-			list_del(&pCfg->linkage);
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-			/*
-			 *	If IOC Status is SUCCESS, save the header
-			 *	and set the status code to GOOD.
-			 */
-			pCfg->status = MPT_CONFIG_ERROR;
-			if (reply) {
-				ConfigReply_t	*pReply = (ConfigReply_t *)reply;
-				u16		 status;
-
-				status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-				dcprintk(ioc, printk(MYIOC_s_NOTE_FMT "  IOCStatus=%04xh, IOCLogInfo=%08xh\n",
-				     ioc->name, status, le32_to_cpu(pReply->IOCLogInfo)));
-
-				pCfg->status = status;
-				if (status == MPI_IOCSTATUS_SUCCESS) {
-					if ((pReply->Header.PageType &
-					    MPI_CONFIG_PAGETYPE_MASK) ==
-					    MPI_CONFIG_PAGETYPE_EXTENDED) {
-						pCfg->cfghdr.ehdr->ExtPageLength =
-						    le16_to_cpu(pReply->ExtPageLength);
-						pCfg->cfghdr.ehdr->ExtPageType =
-						    pReply->ExtPageType;
-					}
-					pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
-
-					/* If this is a regular header, save PageLength. */
-					/* LMP Do this better so not using a reserved field! */
-					pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
-					pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
-					pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
-				}
-			}
-
-			/*
-			 *	Wake up the original calling thread
-			 */
-			pCfg->wait_done = 1;
-			wake_up(&mpt_waitq);
+		if (event != MPI_EVENT_EVENT_CHANGE)
+			break;
+	case MPI_FUNCTION_CONFIG:
+	case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
+		ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+		if (reply) {
+			ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+			memcpy(ioc->mptbase_cmds.reply, reply,
+			    min(MPT_DEFAULT_FRAME_SIZE,
+				4 * reply->u.reply.MsgLength));
 		}
-	} else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
-		/* we should be always getting a reply frame */
-		memcpy(ioc->persist_reply_frame, reply,
-		    min(MPT_DEFAULT_FRAME_SIZE,
-		    4*reply->u.reply.MsgLength));
-		del_timer(&ioc->persist_timer);
-		ioc->persist_wait_done = 1;
-		wake_up(&mpt_waitq);
-	} else {
-		printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
-				ioc->name, func);
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+			complete(&ioc->mptbase_cmds.done);
+		} else
+			freereq = 0;
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
+			freereq = 1;
+		break;
+	case MPI_FUNCTION_EVENT_ACK:
+		devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "EventAck reply received\n", ioc->name));
+		break;
+	default:
+		printk(MYIOC_s_ERR_FMT
+		    "Unexpected msg function (=%02Xh) reply received!\n",
+		    ioc->name, reply->u.hdr.Function);
+		break;
 	}
 
 	/*
@@ -988,17 +971,21 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 
 	/*  Put Request back on FreeQ!  */
 	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
+	if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
+		goto out;
+	/* signature to know if this mf is freed */
+	mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
 	list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
 #ifdef MFCNT
 	ioc->mfcnt--;
 #endif
+ out:
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mpt_add_sge - Place a simple SGE at address pAddr.
+ *	mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
  *	@pAddr: virtual address for SGE
  *	@flagslength: SGE flags and data transfer length
  *	@dma_addr: Physical address
@@ -1006,23 +993,116 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
  *	This routine places a MPT request frame back on the MPT adapter's
  *	FreeQ.
  */
-void
-mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
+static void
+mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 {
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
+	pSge->FlagsLength = cpu_to_le32(flagslength);
+	pSge->Address = cpu_to_le32(dma_addr);
+}
+
+/**
+ *	mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@flagslength: SGE flags and data transfer length
+ *	@dma_addr: Physical address
+ *
+ *	This routine places a MPT request frame back on the MPT adapter's
+ *	FreeQ.
+ **/
+static void
+mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	pSge->Address.Low = cpu_to_le32
+			(lower_32_bits((unsigned long)(dma_addr)));
+	pSge->Address.High = cpu_to_le32
+			(upper_32_bits((unsigned long)dma_addr));
+	pSge->FlagsLength = cpu_to_le32
+			((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/**
+ *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
+ *	@pAddr: virtual address for SGE
+ *	@flagslength: SGE flags and data transfer length
+ *	@dma_addr: Physical address
+ *
+ *	This routine places a MPT request frame back on the MPT adapter's
+ *	FreeQ.
+ **/
+static void
+mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	u32 tmp;
+
+	pSge->Address.Low = cpu_to_le32
+			(lower_32_bits((unsigned long)(dma_addr)));
+	tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+
+	/*
+	 * 1078 errata workaround for the 36GB limitation
+	 */
+	if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32)  == 9) {
+		flagslength |=
+		    MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
+		tmp |= (1<<31);
+		if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
+			printk(KERN_DEBUG "1078 P0M2 addressing for "
+			    "addr = 0x%llx len = %d\n",
+			    (unsigned long long)dma_addr,
+			    MPI_SGE_LENGTH(flagslength));
+	}
+
+	pSge->Address.High = cpu_to_le32(tmp);
+	pSge->FlagsLength = cpu_to_le32(
+		(flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@next: nextChainOffset value (u32's)
+ *	@length: length of next SGL segment
+ *	@dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
+		pChain->Length = cpu_to_le16(length);
+		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
+		pChain->NextChainOffset = next;
+		pChain->Address = cpu_to_le32(dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@next: nextChainOffset value (u32's)
+ *	@length: length of next SGL segment
+ *	@dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
 		u32 tmp = dma_addr & 0xFFFFFFFF;
 
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
+		pChain->Length = cpu_to_le16(length);
+		pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
+				 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
 
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
+		pChain->NextChainOffset = next;
+
+		pChain->Address.Low = cpu_to_le32(tmp);
+		tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+		pChain->Address.High = cpu_to_le32(tmp);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1225,7 +1305,7 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
 	}
 	flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
 	flags_length |= ioc->HostPageBuffer_sz;
-	mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+	ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
 	ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
 
 return 0;
@@ -1534,21 +1614,42 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 
 	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
-		    ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
-		    ioc->name));
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
-		    ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
-		    ioc->name));
+	if (sizeof(dma_addr_t) > 4) {
+		const uint64_t required_mask = dma_get_required_mask
+		    (&pdev->dev);
+		if (required_mask > DMA_BIT_MASK(32)
+			&& !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+			&& !pci_set_consistent_dma_mask(pdev,
+						 DMA_BIT_MASK(64))) {
+			ioc->dma_mask = DMA_BIT_MASK(64);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+			&& !pci_set_consistent_dma_mask(pdev,
+						DMA_BIT_MASK(32))) {
+			ioc->dma_mask = DMA_BIT_MASK(32);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else {
+			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+			    ioc->name, pci_name(pdev));
+			return r;
+		}
 	} else {
-		printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
-		    ioc->name, pci_name(pdev));
-		pci_release_selected_regions(pdev, ioc->bars);
-		return r;
+		if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+			&& !pci_set_consistent_dma_mask(pdev,
+						DMA_BIT_MASK(32))) {
+			ioc->dma_mask = DMA_BIT_MASK(32);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else {
+			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+			    ioc->name, pci_name(pdev));
+			return r;
+		}
 	}
 
 	mem_phys = msize = 0;
@@ -1632,6 +1733,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ioc->id = mpt_ids++;
 	sprintf(ioc->name, "ioc%d", ioc->id);
+	dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
 
 	/*
 	 * set initial debug level
@@ -1650,14 +1752,36 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		return r;
 	}
 
+	/*
+	 * Setting up proper handlers for scatter gather handling
+	 */
+	if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+		if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+			ioc->add_sge = &mpt_add_sge_64bit_1078;
+		else
+			ioc->add_sge = &mpt_add_sge_64bit;
+		ioc->add_chain = &mpt_add_chain_64bit;
+		ioc->sg_addr_size = 8;
+	} else {
+		ioc->add_sge = &mpt_add_sge;
+		ioc->add_chain = &mpt_add_chain;
+		ioc->sg_addr_size = 4;
+	}
+	ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
 	ioc->alloc_total = sizeof(MPT_ADAPTER);
 	ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;		/* avoid div by zero! */
 	ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
 
 	ioc->pcidev = pdev;
-	ioc->diagPending = 0;
-	spin_lock_init(&ioc->diagLock);
-	spin_lock_init(&ioc->initializing_hba_lock);
+
+	spin_lock_init(&ioc->taskmgmt_lock);
+	mutex_init(&ioc->internal_cmds.mutex);
+	init_completion(&ioc->internal_cmds.done);
+	mutex_init(&ioc->mptbase_cmds.mutex);
+	init_completion(&ioc->mptbase_cmds.done);
+	mutex_init(&ioc->taskmgmt_cmds.mutex);
+	init_completion(&ioc->taskmgmt_cmds.done);
 
 	/* Initialize the event logging.
 	 */
@@ -1670,16 +1794,13 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->mfcnt = 0;
 #endif
 
+	ioc->sh = NULL;
 	ioc->cached_fw = NULL;
 
 	/* Initilize SCSI Config Data structure
 	 */
 	memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
 
-	/* Initialize the running configQ head.
-	 */
-	INIT_LIST_HEAD(&ioc->configQ);
-
 	/* Initialize the fc rport list head.
 	 */
 	INIT_LIST_HEAD(&ioc->fc_rports);
@@ -1690,9 +1811,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Initialize workqueue */
 	INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
-	spin_lock_init(&ioc->fault_reset_work_lock);
 
-	snprintf(ioc->reset_work_q_name, sizeof(ioc->reset_work_q_name),
+	snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
 		 "mpt_poll_%d", ioc->id);
 	ioc->reset_work_q =
 		create_singlethread_workqueue(ioc->reset_work_q_name);
@@ -1767,11 +1887,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	case MPI_MANUFACTPAGE_DEVID_SAS1064:
 	case MPI_MANUFACTPAGE_DEVID_SAS1068:
 		ioc->errata_flag_1064 = 1;
+		ioc->bus_type = SAS;
+		break;
 
 	case MPI_MANUFACTPAGE_DEVID_SAS1064E:
 	case MPI_MANUFACTPAGE_DEVID_SAS1068E:
 	case MPI_MANUFACTPAGE_DEVID_SAS1078:
 		ioc->bus_type = SAS;
+		break;
 	}
 
 
@@ -1813,6 +1936,11 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	 */
 	mpt_detect_bound_ports(ioc, pdev);
 
+	INIT_LIST_HEAD(&ioc->fw_event_list);
+	spin_lock_init(&ioc->fw_event_lock);
+	snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
+	ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+
 	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
 	    CAN_SLEEP)) != 0){
 		printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
@@ -1885,13 +2013,18 @@ mpt_detach(struct pci_dev *pdev)
 	/*
 	 * Stop polling ioc for fault condition
 	 */
-	spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	wq = ioc->reset_work_q;
 	ioc->reset_work_q = NULL;
-	spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 	cancel_delayed_work(&ioc->fault_reset_work);
 	destroy_workqueue(wq);
 
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->fw_event_q;
+	ioc->fw_event_q = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	destroy_workqueue(wq);
 
 	sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
 	remove_proc_entry(pname, NULL);
@@ -1994,6 +2127,21 @@ mpt_resume(struct pci_dev *pdev)
 	if (err)
 		return err;
 
+	if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+		if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+			ioc->add_sge = &mpt_add_sge_64bit_1078;
+		else
+			ioc->add_sge = &mpt_add_sge_64bit;
+		ioc->add_chain = &mpt_add_chain_64bit;
+		ioc->sg_addr_size = 8;
+	} else {
+
+		ioc->add_sge = &mpt_add_sge;
+		ioc->add_chain = &mpt_add_chain;
+		ioc->sg_addr_size = 4;
+	}
+	ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
 	printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
 	    ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
 	    CHIPREG_READ32(&ioc->chip->Doorbell));
@@ -2091,12 +2239,16 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	ioc->active = 0;
 
 	if (ioc->alt_ioc) {
-		if (ioc->alt_ioc->active)
+		if (ioc->alt_ioc->active ||
+		    reason == MPT_HOSTEVENT_IOC_RECOVER) {
 			reset_alt_ioc_active = 1;
-
-		/* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
-		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
-		ioc->alt_ioc->active = 0;
+			/* Disable alt-IOC's reply interrupts
+			 *  (and FreeQ) for a bit
+			 **/
+			CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+				0xFFFFFFFF);
+			ioc->alt_ioc->active = 0;
+		}
 	}
 
 	hard = 1;
@@ -2117,9 +2269,11 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			}
 
 		} else {
-			printk(MYIOC_s_WARN_FMT "NOT READY!\n", ioc->name);
+			printk(MYIOC_s_WARN_FMT
+			    "NOT READY WARNING!\n", ioc->name);
 		}
-		return -1;
+		ret = -1;
+		goto out;
 	}
 
 	/* hard_reset_done = 0 if a soft reset was performed
@@ -2129,7 +2283,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
 			alt_ioc_ready = 1;
 		else
-			printk(MYIOC_s_WARN_FMT "alt_ioc not ready!\n", ioc->alt_ioc->name);
+			printk(MYIOC_s_WARN_FMT
+			    ": alt-ioc Not ready WARNING!\n",
+			    ioc->alt_ioc->name);
 	}
 
 	for (ii=0; ii<5; ii++) {
@@ -2150,7 +2306,8 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	if (alt_ioc_ready) {
 		if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
 			dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			    "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
+			    "Initial Alt IocFacts failed rc=%x\n",
+			    ioc->name, rc));
 			/* Retry - alt IOC was initialized once
 			 */
 			rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
@@ -2194,16 +2351,20 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			    IRQF_SHARED, ioc->name, ioc);
 			if (rc < 0) {
 				printk(MYIOC_s_ERR_FMT "Unable to allocate "
-				    "interrupt %d!\n", ioc->name, ioc->pcidev->irq);
+				    "interrupt %d!\n",
+				    ioc->name, ioc->pcidev->irq);
 				if (ioc->msi_enable)
 					pci_disable_msi(ioc->pcidev);
-				return -EBUSY;
+				ret = -EBUSY;
+				goto out;
 			}
 			irq_allocated = 1;
 			ioc->pci_irq = ioc->pcidev->irq;
 			pci_set_master(ioc->pcidev);		/* ?? */
-			dprintk(ioc, printk(MYIOC_s_INFO_FMT "installed at interrupt "
-			    "%d\n", ioc->name, ioc->pcidev->irq));
+			pci_set_drvdata(ioc->pcidev, ioc);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+			    "installed at interrupt %d\n", ioc->name,
+			    ioc->pcidev->irq));
 		}
 	}
 
@@ -2212,17 +2373,22 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	 * init as upper addresses are needed for init.
 	 * If fails, continue with alt-ioc processing
 	 */
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
+	    ioc->name));
 	if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
 		ret = -3;
 
 	/* May need to check/upload firmware & data here!
 	 * If fails, continue with alt-ioc processing
 	 */
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
+	    ioc->name));
 	if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
 		ret = -4;
 // NEW!
 	if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
-		printk(MYIOC_s_WARN_FMT ": alt_ioc (%d) FIFO mgmt alloc!\n",
+		printk(MYIOC_s_WARN_FMT
+		    ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
 		    ioc->alt_ioc->name, rc);
 		alt_ioc_ready = 0;
 		reset_alt_ioc_active = 0;
@@ -2232,8 +2398,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
 			alt_ioc_ready = 0;
 			reset_alt_ioc_active = 0;
-			printk(MYIOC_s_WARN_FMT "alt_ioc (%d) init failure!\n",
-			    ioc->alt_ioc->name, rc);
+			printk(MYIOC_s_WARN_FMT
+				": alt-ioc: (%d) init failure WARNING!\n",
+					ioc->alt_ioc->name, rc);
 		}
 	}
 
@@ -2269,28 +2436,36 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		}
 	}
 
+	/*  Enable MPT base driver management of EventNotification
+	 *  and EventAck handling.
+	 */
+	if ((ret == 0) && (!ioc->facts.EventState)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+			"SendEventNotification\n",
+		    ioc->name));
+		ret = SendEventNotification(ioc, 1, sleepFlag);	/* 1=Enable */
+	}
+
+	if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
+		rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
+
 	if (ret == 0) {
 		/* Enable! (reply interrupt) */
 		CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
 		ioc->active = 1;
 	}
-
-	if (reset_alt_ioc_active && ioc->alt_ioc) {
-		/* (re)Enable alt-IOC! (reply interrupt) */
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "alt_ioc reply irq re-enabled\n",
-		    ioc->alt_ioc->name));
-		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
-		ioc->alt_ioc->active = 1;
+	if (rc == 0) {	/* alt ioc */
+		if (reset_alt_ioc_active && ioc->alt_ioc) {
+			/* (re)Enable alt-IOC! (reply interrupt) */
+			dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
+				"reply irq re-enabled\n",
+				ioc->alt_ioc->name));
+			CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+				MPI_HIM_DIM);
+			ioc->alt_ioc->active = 1;
+		}
 	}
 
-	/*  Enable MPT base driver management of EventNotification
-	 *  and EventAck handling.
-	 */
-	if ((ret == 0) && (!ioc->facts.EventState))
-		(void) SendEventNotification(ioc, 1);	/* 1=Enable EventNotification */
-
-	if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
-		(void) SendEventNotification(ioc->alt_ioc, 1);	/* 1=Enable EventNotification */
 
 	/*	Add additional "reason" check before call to GetLanConfigPages
 	 *	(combined with GetIoUnitPage2 call).  This prevents a somewhat
@@ -2306,8 +2481,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		mutex_init(&ioc->raid_data.inactive_list_mutex);
 		INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
 
-		if (ioc->bus_type == SAS) {
+		switch (ioc->bus_type) {
 
+		case SAS:
 			/* clear persistency table */
 			if(ioc->facts.IOCExceptions &
 			    MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
@@ -2321,8 +2497,15 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			 */
 			mpt_findImVolumes(ioc);
 
-		} else if (ioc->bus_type == FC) {
-			if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
+			/* Check, and possibly reset, the coalescing value
+			 */
+			mpt_read_ioc_pg_1(ioc);
+
+			break;
+
+		case FC:
+			if ((ioc->pfacts[0].ProtocolFlags &
+				MPI_PORTFACTS_PROTOCOL_LAN) &&
 			    (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
 				/*
 				 *  Pre-fetch the ports LAN MAC address!
@@ -2331,11 +2514,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 				(void) GetLanConfigPages(ioc);
 				a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
 				dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-				    "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
-				    ioc->name, a[5], a[4], a[3], a[2], a[1], a[0]));
-
+					"LanAddr = %02X:%02X:%02X"
+					":%02X:%02X:%02X\n",
+					ioc->name, a[5], a[4],
+					a[3], a[2], a[1], a[0]));
 			}
-		} else {
+			break;
+
+		case SPI:
 			/* Get NVRAM and adapter maximums from SPP 0 and 2
 			 */
 			mpt_GetScsiPortSettings(ioc, 0);
@@ -2354,6 +2540,8 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			mpt_read_ioc_pg_1(ioc);
 
 			mpt_read_ioc_pg_4(ioc);
+
+			break;
 		}
 
 		GetIoUnitPage2(ioc);
@@ -2435,16 +2623,20 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
 		if (_pcidev == peer) {
 			/* Paranoia checks */
 			if (ioc->alt_ioc != NULL) {
-				printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
-					ioc->name, ioc->alt_ioc->name);
+				printk(MYIOC_s_WARN_FMT
+				    "Oops, already bound (%s <==> %s)!\n",
+				    ioc->name, ioc->name, ioc->alt_ioc->name);
 				break;
 			} else if (ioc_srch->alt_ioc != NULL) {
-				printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
-					ioc_srch->name, ioc_srch->alt_ioc->name);
+				printk(MYIOC_s_WARN_FMT
+				    "Oops, already bound (%s <==> %s)!\n",
+				    ioc_srch->name, ioc_srch->name,
+				    ioc_srch->alt_ioc->name);
 				break;
 			}
-			dprintk(ioc, printk(MYIOC_s_INFO_FMT "FOUND! binding to %s\n",
-				ioc->name, ioc_srch->name));
+			dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				"FOUND! binding %s <==> %s\n",
+				ioc->name, ioc->name, ioc_srch->name));
 			ioc_srch->alt_ioc = ioc;
 			ioc->alt_ioc = ioc_srch;
 		}
@@ -2464,8 +2656,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 	int ret;
 
 	if (ioc->cached_fw != NULL) {
-		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
-		    "adapter\n", __func__, ioc->name));
+		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"%s: Pushing FW onto adapter\n", __func__, ioc->name));
 		if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
 		    ioc->cached_fw, CAN_SLEEP)) < 0) {
 			printk(MYIOC_s_WARN_FMT
@@ -2474,11 +2666,30 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 		}
 	}
 
+	/*
+	 * Put the controller into ready state (if its not already)
+	 */
+	if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
+		if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
+		    CAN_SLEEP)) {
+			if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
+				printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit "
+				    "reset failed to put ioc in ready state!\n",
+				    ioc->name, __func__);
+		} else
+			printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit reset "
+			    "failed!\n", ioc->name, __func__);
+	}
+
+
 	/* Disable adapter interrupts! */
+	synchronize_irq(ioc->pcidev->irq);
 	CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
 	ioc->active = 0;
+
 	/* Clear any lingering interrupt */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+	CHIPREG_READ32(&ioc->chip->IntStatus);
 
 	if (ioc->alloc != NULL) {
 		sz = ioc->alloc_sz;
@@ -2538,19 +2749,22 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 		if((ret = mpt_host_page_access_control(ioc,
 		    MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
 			printk(MYIOC_s_ERR_FMT
-			   "host page buffers free failed (%d)!\n",
-			    ioc->name, ret);
+			   ": %s: host page buffers free failed (%d)!\n",
+			    ioc->name, __func__, ret);
 		}
-		dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "HostPageBuffer free  @ %p, sz=%d bytes\n",
-		 	ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+		dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"HostPageBuffer free  @ %p, sz=%d bytes\n",
+			ioc->name, ioc->HostPageBuffer,
+			ioc->HostPageBuffer_sz));
 		pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
 		    ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
 		ioc->HostPageBuffer = NULL;
 		ioc->HostPageBuffer_sz = 0;
 		ioc->alloc_total -= ioc->HostPageBuffer_sz;
 	}
-}
 
+	pci_set_drvdata(ioc->pcidev, NULL);
+}
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mpt_adapter_dispose - Free all resources associated with an MPT adapter
@@ -2690,8 +2904,12 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	}
 
 	/* Is it already READY? */
-	if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+	if (!statefault &&
+	    ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+		    "IOC is in READY state\n", ioc->name));
 		return 0;
+	}
 
 	/*
 	 *	Check to see if IOC is in FAULT state.
@@ -2764,8 +2982,9 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 
 		ii++; cntdn--;
 		if (!cntdn) {
-			printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
-					ioc->name, (int)((ii+5)/HZ));
+			printk(MYIOC_s_ERR_FMT
+				"Wait IOC_READY state (0x%x) timeout(%d)!\n",
+				ioc->name, ioc_state, (int)((ii+5)/HZ));
 			return -ETIME;
 		}
 
@@ -2778,9 +2997,8 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	}
 
 	if (statefault < 3) {
-		printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
-				ioc->name,
-				statefault==1 ? "stuck handshake" : "IOC FAULT");
+		printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
+			statefault == 1 ? "stuck handshake" : "IOC FAULT");
 	}
 
 	return hard_reset_done;
@@ -2833,8 +3051,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 
 	/* IOC *must* NOT be in RESET state! */
 	if (ioc->last_state == MPI_IOC_STATE_RESET) {
-		printk(MYIOC_s_ERR_FMT "Can't get IOCFacts NOT READY! (%08x)\n",
-		    ioc->name, ioc->last_state );
+		printk(KERN_ERR MYNAM
+		    ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+		    ioc->name, ioc->last_state);
 		return -44;
 	}
 
@@ -2896,7 +3115,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		 *	Old: u16{Major(4),Minor(4),SubMinor(8)}
 		 *	New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
 		 */
-		if (facts->MsgVersion < 0x0102) {
+		if (facts->MsgVersion < MPI_VERSION_01_02) {
 			/*
 			 *	Handle old FC f/w style, convert to new...
 			 */
@@ -2908,9 +3127,11 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 			facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
 
 		facts->ProductID = le16_to_cpu(facts->ProductID);
+
 		if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
 		    > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
 			ioc->ir_firmware = 1;
+
 		facts->CurrentHostMfaHighAddr =
 				le32_to_cpu(facts->CurrentHostMfaHighAddr);
 		facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -2926,7 +3147,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		 * to 14 in MPI-1.01.0x.
 		 */
 		if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
-		    facts->MsgVersion > 0x0100) {
+		    facts->MsgVersion > MPI_VERSION_01_00) {
 			facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
 		}
 
@@ -3108,6 +3329,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
 
 	ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
 	ioc_init.MaxBuses = (U8)ioc->number_of_buses;
+
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
 		   ioc->name, ioc->facts.MsgVersion));
 	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -3122,7 +3344,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
 	}
 	ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz);	/* in BYTES */
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		/* Save the upper 32-bits of the request
 		 * (reply) and sense buffers.
 		 */
@@ -3325,11 +3547,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
 	FWUpload_t		*prequest;
 	FWUploadReply_t		*preply;
 	FWUploadTCSGE_t		*ptcsge;
-	int			 sgeoffset;
 	u32			 flagsLength;
 	int			 ii, sz, reply_sz;
 	int			 cmdStatus;
-
+	int			request_size;
 	/* If the image size is 0, we are done.
 	 */
 	if ((sz = ioc->facts.FWImageSize) == 0)
@@ -3364,42 +3585,41 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
 	ptcsge->ImageSize = cpu_to_le32(sz);
 	ptcsge++;
 
-	sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t);
-
 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
-	mpt_add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
-
-	sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
-	    ioc->name, prequest, sgeoffset));
+	ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
+	request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
+	    ioc->SGE_size;
+	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
+	    " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
+	    ioc->facts.FWImageSize, request_size));
 	DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
 
-	ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
-				reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
+	ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
+	    reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
 
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Upload completed rc=%x \n", ioc->name, ii));
+	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
+	    "rc=%x \n", ioc->name, ii));
 
 	cmdStatus = -EFAULT;
 	if (ii == 0) {
 		/* Handshake transfer was complete and successful.
 		 * Check the Reply Frame.
 		 */
-		int status, transfer_sz;
-		status = le16_to_cpu(preply->IOCStatus);
-		if (status == MPI_IOCSTATUS_SUCCESS) {
-			transfer_sz = le32_to_cpu(preply->ActualImageSize);
-			if (transfer_sz == sz)
+		int status;
+		status = le16_to_cpu(preply->IOCStatus) &
+				MPI_IOCSTATUS_MASK;
+		if (status == MPI_IOCSTATUS_SUCCESS &&
+		    ioc->facts.FWImageSize ==
+		    le32_to_cpu(preply->ActualImageSize))
 				cmdStatus = 0;
-		}
 	}
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
 			ioc->name, cmdStatus));
 
 
 	if (cmdStatus) {
-
-		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": fw upload failed, freeing image \n",
-			ioc->name));
+		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
+		    "freeing image \n", ioc->name));
 		mpt_free_fw_memory(ioc);
 	}
 	kfree(prequest);
@@ -3723,6 +3943,10 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
 
 	if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+
+		if (!ignore)
+			return 0;
+
 		drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
 			"address=%p\n",  ioc->name, __func__,
 			&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
@@ -3740,6 +3964,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				"looking for READY STATE: doorbell=%x"
 			        " count=%d\n",
 				ioc->name, doorbell, count));
+
 			if (doorbell == MPI_IOC_STATE_READY) {
 				return 1;
 			}
@@ -3890,6 +4115,10 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
 				doorbell &= MPI_IOC_STATE_MASK;
 
+				drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				    "looking for READY STATE: doorbell=%x"
+				    " count=%d\n", ioc->name, doorbell, count));
+
 				if (doorbell == MPI_IOC_STATE_READY) {
 					break;
 				}
@@ -3901,6 +4130,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 					mdelay (1000);
 				}
 			}
+
+			if (doorbell != MPI_IOC_STATE_READY)
+				printk(MYIOC_s_ERR_FMT "Failed to come READY "
+				    "after reset! IocState=%x", ioc->name,
+				    doorbell);
 		}
 	}
 
@@ -4019,8 +4253,9 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
 			if (sleepFlag != CAN_SLEEP)
 				count *= 10;
 
-			printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
-			    ioc->name, (int)((count+5)/HZ));
+			printk(MYIOC_s_ERR_FMT
+			    "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+			    ioc->name, state, (int)((count+5)/HZ));
 			return -ETIME;
 		}
 
@@ -4090,24 +4325,29 @@ initChainBuffers(MPT_ADAPTER *ioc)
 	 * num_sge = num sge in request frame + last chain buffer
 	 * scale = num sge per chain buffer if no chain element
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64))
-		num_sge =  scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+	scale = ioc->req_sz / ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64))
+		num_sge =  scale + (ioc->req_sz - 60) / ioc->SGE_size;
 	else
-		num_sge =  1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+		num_sge =  1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
-			(ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+			(ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
-		numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
-			(ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+		numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
+		    scale + (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
 		ioc->name, num_sge, numSGE));
 
-	if ( numSGE > MPT_SCSI_SG_DEPTH	)
-		numSGE = MPT_SCSI_SG_DEPTH;
+	if (ioc->bus_type == FC) {
+		if (numSGE > MPT_SCSI_FC_SG_DEPTH)
+			numSGE = MPT_SCSI_FC_SG_DEPTH;
+	} else {
+		if (numSGE > MPT_SCSI_SG_DEPTH)
+			numSGE = MPT_SCSI_SG_DEPTH;
+	}
 
 	num_chain = 1;
 	while (numSGE - num_sge > 0) {
@@ -4161,12 +4401,42 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 	dma_addr_t alloc_dma;
 	u8 *mem;
 	int i, reply_sz, sz, total_size, num_chain;
+	u64	dma_mask;
+
+	dma_mask = 0;
 
 	/*  Prime reply FIFO...  */
 
 	if (ioc->reply_frames == NULL) {
 		if ( (num_chain = initChainBuffers(ioc)) < 0)
 			return -1;
+		/*
+		 * 1078 errata workaround for the 36GB limitation
+		 */
+		if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
+		    ioc->dma_mask > DMA_35BIT_MASK) {
+			if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
+			    && !pci_set_consistent_dma_mask(ioc->pcidev,
+			    DMA_BIT_MASK(32))) {
+				dma_mask = DMA_35BIT_MASK;
+				d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				    "setting 35 bit addressing for "
+				    "Request/Reply/Chain and Sense Buffers\n",
+				    ioc->name));
+			} else {
+				/*Reseting DMA mask to 64 bit*/
+				pci_set_dma_mask(ioc->pcidev,
+					DMA_BIT_MASK(64));
+				pci_set_consistent_dma_mask(ioc->pcidev,
+					DMA_BIT_MASK(64));
+
+				printk(MYIOC_s_ERR_FMT
+				    "failed setting 35 bit addressing for "
+				    "Request/Reply/Chain and Sense Buffers\n",
+				    ioc->name);
+				return -1;
+			}
+		}
 
 		total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
 		dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
@@ -4305,9 +4575,16 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		alloc_dma += ioc->reply_sz;
 	}
 
+	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	    ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
+	    ioc->dma_mask))
+		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "restoring 64 bit addressing\n", ioc->name));
+
 	return 0;
 
 out_fail:
+
 	if (ioc->alloc != NULL) {
 		sz = ioc->alloc_sz;
 		pci_free_consistent(ioc->pcidev,
@@ -4324,6 +4601,13 @@ out_fail:
 				ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
 		ioc->sense_buf_pool = NULL;
 	}
+
+	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	    DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
+	    DMA_BIT_MASK(64)))
+		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "restoring 64 bit addressing\n", ioc->name));
+
 	return -1;
 }
 
@@ -4759,7 +5043,14 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 	SasIoUnitControlReply_t		*sasIoUnitCntrReply;
 	MPT_FRAME_HDR			*mf = NULL;
 	MPIHeader_t			*mpi_hdr;
+	int				ret = 0;
+	unsigned long 	 		timeleft;
+
+	mutex_lock(&ioc->mptbase_cmds.mutex);
 
+	/* init the internal cmd struct */
+	memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+	INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
 
 	/* insure garbage is not sent to fw */
 	switch(persist_opcode) {
@@ -4769,17 +5060,19 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 		break;
 
 	default:
-		return -1;
-		break;
+		ret = -1;
+		goto out;
 	}
 
-	printk("%s: persist_opcode=%x\n",__func__, persist_opcode);
+	printk(KERN_DEBUG  "%s: persist_opcode=%x\n",
+		__func__, persist_opcode);
 
 	/* Get a MF for this command.
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		printk("%s: no msg frames!\n",__func__);
-		return -1;
+		printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
+		ret = -1;
+		goto out;
         }
 
 	mpi_hdr = (MPIHeader_t *) mf;
@@ -4789,27 +5082,42 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 	sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
 	sasIoUnitCntrReq->Operation = persist_opcode;
 
-	init_timer(&ioc->persist_timer);
-	ioc->persist_timer.data = (unsigned long) ioc;
-	ioc->persist_timer.function = mpt_timer_expired;
-	ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */;
-	ioc->persist_wait_done=0;
-	add_timer(&ioc->persist_timer);
 	mpt_put_msg_frame(mpt_base_index, ioc, mf);
-	wait_event(mpt_waitq, ioc->persist_wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		printk(KERN_DEBUG "%s: failed\n", __func__);
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft) {
+			printk(KERN_DEBUG "%s: Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
+	}
+
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		ret = -1;
+		goto out;
+	}
 
 	sasIoUnitCntrReply =
-	    (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
+	    (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
 	if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
-		printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    __func__,
-		    sasIoUnitCntrReply->IOCStatus,
+		printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+		    __func__, sasIoUnitCntrReply->IOCStatus,
 		    sasIoUnitCntrReply->IOCLogInfo);
-		return -1;
-	}
+		printk(KERN_DEBUG "%s: failed\n", __func__);
+		ret = -1;
+	} else
+		printk(KERN_DEBUG "%s: success\n", __func__);
+ out:
 
-	printk("%s: success\n",__func__);
-	return 0;
+	CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+	mutex_unlock(&ioc->mptbase_cmds.mutex);
+	return ret;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5394,17 +5702,20 @@ mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
  *	-ENOMEM if pci_alloc failed
  **/
 int
-mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
+			RaidPhysDiskPage0_t *phys_disk)
 {
-	CONFIGPARMS		 	cfg;
-	ConfigPageHeader_t	 	hdr;
+	CONFIGPARMS			cfg;
+	ConfigPageHeader_t		hdr;
 	dma_addr_t			dma_handle;
 	pRaidPhysDiskPage0_t		buffer = NULL;
 	int				rc;
 
 	memset(&cfg, 0 , sizeof(CONFIGPARMS));
 	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
 
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
 	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
@@ -5451,6 +5762,161 @@ mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t
 }
 
 /**
+ *	mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
+ *	@ioc: Pointer to a Adapter Structure
+ *	@phys_disk_num: io unit unique phys disk num generated by the ioc
+ *
+ *	Return:
+ *	returns number paths
+ **/
+int
+mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
+{
+	CONFIGPARMS		 	cfg;
+	ConfigPageHeader_t	 	hdr;
+	dma_addr_t			dma_handle;
+	pRaidPhysDiskPage1_t		buffer = NULL;
+	int				rc;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	hdr.PageNumber = 1;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.physAddr = -1;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = 0;
+		goto out;
+	}
+
+	if (!hdr.PageLength) {
+		rc = 0;
+		goto out;
+	}
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer) {
+		rc = 0;
+		goto out;
+	}
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+	cfg.pageAddr = phys_disk_num;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = 0;
+		goto out;
+	}
+
+	rc = buffer->NumPhysDiskPaths;
+ out:
+
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+
+	return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
+
+/**
+ *	mpt_raid_phys_disk_pg1 - returns phys disk page 1
+ *	@ioc: Pointer to a Adapter Structure
+ *	@phys_disk_num: io unit unique phys disk num generated by the ioc
+ *	@phys_disk: requested payload data returned
+ *
+ *	Return:
+ *	0 on success
+ *	-EFAULT if read of config page header fails or data pointer not NULL
+ *	-ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+		RaidPhysDiskPage1_t *phys_disk)
+{
+	CONFIGPARMS		 	cfg;
+	ConfigPageHeader_t	 	hdr;
+	dma_addr_t			dma_handle;
+	pRaidPhysDiskPage1_t		buffer = NULL;
+	int				rc;
+	int				i;
+	__le64				sas_address;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	rc = 0;
+
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	hdr.PageNumber = 1;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.physAddr = -1;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (!hdr.PageLength) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+	cfg.pageAddr = phys_disk_num;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
+	phys_disk->PhysDiskNum = phys_disk_num;
+	for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
+		phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
+		phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
+		phys_disk->Path[i].OwnerIdentifier =
+				buffer->Path[i].OwnerIdentifier;
+		phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
+		memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
+		sas_address = le64_to_cpu(sas_address);
+		memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
+		memcpy(&sas_address,
+				&buffer->Path[i].OwnerWWID, sizeof(__le64));
+		sas_address = le64_to_cpu(sas_address);
+		memcpy(&phys_disk->Path[i].OwnerWWID,
+				&sas_address, sizeof(__le64));
+	}
+
+ out:
+
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+
+	return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
+
+
+/**
  *	mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
  *	@ioc: Pointer to a Adapter Strucutre
  *
@@ -5775,30 +6241,28 @@ mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
  *	SendEventNotification - Send EventNotification (on or off) request to adapter
  *	@ioc: Pointer to MPT_ADAPTER structure
  *	@EvSwitch: Event switch flags
+ *	@sleepFlag: Specifies whether the process can sleep
  */
 static int
-SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
+SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
 {
-	EventNotification_t	*evnp;
+	EventNotification_t	evn;
+	MPIDefaultReply_t	reply_buf;
 
-	evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
-	if (evnp == NULL) {
-		devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
-				ioc->name));
-		return 0;
-	}
-	memset(evnp, 0, sizeof(*evnp));
-
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
+	memset(&evn, 0, sizeof(EventNotification_t));
+	memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
 
-	evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
-	evnp->ChainOffset = 0;
-	evnp->MsgFlags = 0;
-	evnp->Switch = EvSwitch;
+	evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
+	evn.Switch = EvSwitch;
+	evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
 
-	mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp);
+	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "Sending EventNotification (%d) request %p\n",
+	    ioc->name, EvSwitch, &evn));
 
-	return 0;
+	return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
+	    (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
+	    sleepFlag);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5814,7 +6278,7 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
 
 	if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__func__));
+		    ioc->name, __func__));
 		return -1;
 	}
 
@@ -5851,12 +6315,19 @@ int
 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 {
 	Config_t	*pReq;
+	ConfigReply_t	*pReply;
 	ConfigExtendedPageHeader_t  *pExtHdr = NULL;
 	MPT_FRAME_HDR	*mf;
-	unsigned long	 flags;
-	int		 ii, rc;
+	int		 ii;
 	int		 flagsLength;
-	int		 in_isr;
+	long		 timeout;
+	int		 ret;
+	u8		 page_type = 0, extend_page;
+	unsigned long 	 timeleft;
+	unsigned long	 flags;
+    int		 in_isr;
+	u8		 issue_hard_reset = 0;
+	u8		 retry_count = 0;
 
 	/*	Prevent calling wait_event() (below), if caller happens
 	 *	to be in ISR context, because that is fatal!
@@ -5866,15 +6337,43 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 		dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
 				ioc->name));
 		return -EPERM;
+    }
+
+	/* don't send a config page during diag reset */
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: busy with host reset\n", ioc->name, __func__));
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		return -EBUSY;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+	/* don't send if no chance of success */
+	if (!ioc->active ||
+	    mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: ioc not operational, %d, %xh\n",
+		    ioc->name, __func__, ioc->active,
+		    mpt_GetIocState(ioc, 0)));
+		return -EFAULT;
 	}
 
+ retry_config:
+	mutex_lock(&ioc->mptbase_cmds.mutex);
+	/* init the internal cmd struct */
+	memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+	INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
+
 	/* Get and Populate a free Frame
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		dcprintk(ioc, printk(MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n",
-				ioc->name));
-		return -EAGAIN;
+		dcprintk(ioc, printk(MYIOC_s_WARN_FMT
+		"mpt_config: no msg frames!\n", ioc->name));
+		ret = -EAGAIN;
+		goto out;
 	}
+
 	pReq = (Config_t *)mf;
 	pReq->Action = pCfg->action;
 	pReq->Reserved = 0;
@@ -5900,7 +6399,9 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 		pReq->ExtPageType = pExtHdr->ExtPageType;
 		pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 
-		/* Page Length must be treated as a reserved field for the extended header. */
+		/* Page Length must be treated as a reserved field for the
+		 * extended header.
+		 */
 		pReq->Header.PageLength = 0;
 	}
 
@@ -5913,78 +6414,91 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 	else
 		flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
 
-	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
+	    MPI_CONFIG_PAGETYPE_EXTENDED) {
 		flagsLength |= pExtHdr->ExtPageLength * 4;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
-			ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
-	}
-	else {
+		page_type = pReq->ExtPageType;
+		extend_page = 1;
+	} else {
 		flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
-			ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+		page_type = pReq->Header.PageType;
+		extend_page = 0;
 	}
 
-	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
-
-	/* Append pCfg pointer to end of mf
-	 */
-	*((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) =  (void *) pCfg;
-
-	/* Initalize the timer
-	 */
-	init_timer_on_stack(&pCfg->timer);
-	pCfg->timer.data = (unsigned long) ioc;
-	pCfg->timer.function = mpt_timer_expired;
-	pCfg->wait_done = 0;
-
-	/* Set the timer; ensure 10 second minimum */
-	if (pCfg->timeout < 10)
-		pCfg->timer.expires = jiffies + HZ*10;
-	else
-		pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
-	/* Add to end of Q, set timer and then issue this command */
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	list_add_tail(&pCfg->linkage, &ioc->configQ);
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "Sending Config request type 0x%x, page 0x%x and action %d\n",
+	    ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
 
-	add_timer(&pCfg->timer);
+	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+	timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
 	mpt_put_msg_frame(mpt_base_index, ioc, mf);
-	wait_event(mpt_waitq, pCfg->wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
+		timeout);
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "Failed Sending Config request type 0x%x, page 0x%x,"
+		    " action %d, status %xh, time left %ld\n\n",
+			ioc->name, page_type, pReq->Header.PageNumber,
+			pReq->Action, ioc->mptbase_cmds.status, timeleft));
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft)
+			issue_hard_reset = 1;
+		goto out;
+	}
 
-	/* mf has been freed - do not access */
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		ret = -1;
+		goto out;
+	}
+	pReply = (ConfigReply_t	*)ioc->mptbase_cmds.reply;
+	ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	if (ret == MPI_IOCSTATUS_SUCCESS) {
+		if (extend_page) {
+			pCfg->cfghdr.ehdr->ExtPageLength =
+			    le16_to_cpu(pReply->ExtPageLength);
+			pCfg->cfghdr.ehdr->ExtPageType =
+			    pReply->ExtPageType;
+		}
+		pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+		pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+		pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+		pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
 
-	rc = pCfg->status;
+	}
 
-	return rc;
-}
+	if (retry_count)
+		printk(MYIOC_s_INFO_FMT "Retry completed "
+		    "ret=0x%x timeleft=%ld\n",
+		    ioc->name, ret, timeleft);
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mpt_timer_expired - Callback for timer process.
- *	Used only internal config functionality.
- *	@data: Pointer to MPT_SCSI_HOST recast as an unsigned long
- */
-static void
-mpt_timer_expired(unsigned long data)
-{
-	MPT_ADAPTER *ioc = (MPT_ADAPTER *) data;
-
-	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired! \n", ioc->name));
+	dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
+	     ret, le32_to_cpu(pReply->IOCLogInfo)));
 
-	/* Perform a FW reload */
-	if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
-		printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
+out:
 
-	/* No more processing.
-	 * Hard reset clean-up will wake up
-	 * process and free all resources.
-	 */
-	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired complete!\n", ioc->name));
+	CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+	mutex_unlock(&ioc->mptbase_cmds.mutex);
+	if (issue_hard_reset) {
+		issue_hard_reset = 0;
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+		    ioc->name, __func__);
+		mpt_HardResetHandler(ioc, CAN_SLEEP);
+		mpt_free_msg_frame(ioc, mf);
+		/* attempt one retry for a timed out command */
+		if (!retry_count) {
+			printk(MYIOC_s_INFO_FMT
+			    "Attempting Retry Config request"
+			    " type 0x%x, page 0x%x,"
+			    " action %d\n", ioc->name, page_type,
+			    pCfg->cfghdr.hdr->PageNumber, pCfg->action);
+			retry_count++;
+			goto retry_config;
+		}
+	}
+	return ret;
 
-	return;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5998,41 +6512,34 @@ mpt_timer_expired(unsigned long data)
 static int
 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	CONFIGPARMS *pCfg;
-	unsigned long flags;
-
-	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": IOC %s_reset routed to MPT base driver!\n",
-	    ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-	    reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	if (reset_phase == MPT_IOC_SETUP_RESET) {
-		;
-	} else if (reset_phase == MPT_IOC_PRE_RESET) {
-		/* If the internal config Q is not empty -
-		 * delete timer. MF resources will be freed when
-		 * the FIFO's are primed.
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		list_for_each_entry(pCfg, &ioc->configQ, linkage)
-			del_timer(&pCfg->timer);
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	} else {
-		CONFIGPARMS *pNext;
-
-		/* Search the configQ for internal commands.
-		 * Flush the Q, and wake up all suspended threads.
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) {
-			list_del(&pCfg->linkage);
-
-			pCfg->status = MPT_CONFIG_ERROR;
-			pCfg->wait_done = 1;
-			wake_up(&mpt_waitq);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		ioc->taskmgmt_quiesce_io = 1;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n",  ioc->name, __func__));
+/* wake up mptbase_cmds */
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->mptbase_cmds.status |=
+			    MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->mptbase_cmds.done);
 		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+/* wake up taskmgmt_cmds */
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->taskmgmt_cmds.status |=
+				MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->taskmgmt_cmds.done);
+		}
+		break;
+	default:
+		break;
 	}
 
 	return 1;		/* currently means nothing really */
@@ -6344,6 +6851,59 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
 
 	*size = y;
 }
+/**
+ *	mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ *	Returns 0 for SUCCESS or -1 if FAILED.
+ *
+ *	If -1 is return, then it was not possible to set the flags
+ **/
+int
+mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+	int		 retval;
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
+	    (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
+		retval = -1;
+		goto out;
+	}
+	retval = 0;
+	ioc->taskmgmt_in_progress = 1;
+	ioc->taskmgmt_quiesce_io = 1;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->taskmgmt_in_progress = 1;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 1;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+	return retval;
+}
+EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
+
+/**
+ *	mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	ioc->taskmgmt_in_progress = 0;
+	ioc->taskmgmt_quiesce_io = 0;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->taskmgmt_in_progress = 0;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+}
+EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
 
 
 /**
@@ -6397,7 +6957,9 @@ int
 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 {
 	int		 rc;
+	u8	 cb_idx;
 	unsigned long	 flags;
+	unsigned long	 time_count;
 
 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
 #ifdef MFCNT
@@ -6410,14 +6972,15 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	/* Reset the adapter. Prevent more than 1 call to
 	 * mpt_do_ioc_recovery at any instant in time.
 	 */
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){
-		spin_unlock_irqrestore(&ioc->diagLock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 		return 0;
-	} else {
-		ioc->diagPending = 1;
 	}
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
+	ioc->ioc_reset_in_progress = 1;
+	if (ioc->alt_ioc)
+		ioc->alt_ioc->ioc_reset_in_progress = 1;
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
 	/* FIXME: If do_ioc_recovery fails, repeat....
 	 */
@@ -6427,47 +6990,57 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	 * Prevents timeouts occurring during a diagnostic reset...very bad.
 	 * For all other protocol drivers, this is a no-op.
 	 */
-	{
-		u8	 cb_idx;
-		int	 r = 0;
-
-		for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-			if (MptResetHandlers[cb_idx]) {
-				dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling IOC reset_setup handler #%d\n",
-						ioc->name, cb_idx));
-				r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
-				if (ioc->alt_ioc) {
-					dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling alt-%s setup reset handler #%d\n",
-							ioc->name, ioc->alt_ioc->name, cb_idx));
-					r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
-				}
-			}
+	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+		if (MptResetHandlers[cb_idx]) {
+			mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+			if (ioc->alt_ioc)
+				mpt_signal_reset(cb_idx, ioc->alt_ioc,
+					MPT_IOC_SETUP_RESET);
 		}
 	}
 
-	if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
-		printk(MYIOC_s_WARN_FMT "Cannot recover rc = %d!\n", ioc->name, rc);
+	time_count = jiffies;
+	rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
+	if (rc != 0) {
+		printk(KERN_WARNING MYNAM
+		    ": WARNING - (%d) Cannot recover %s\n", rc, ioc->name);
+	} else {
+		if (ioc->hard_resets < -1)
+			ioc->hard_resets++;
 	}
-	ioc->reload_fw = 0;
-	if (ioc->alt_ioc)
-		ioc->alt_ioc->reload_fw = 0;
 
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	ioc->diagPending = 0;
-	if (ioc->alt_ioc)
-		ioc->alt_ioc->diagPending = 0;
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	ioc->ioc_reset_in_progress = 0;
+	ioc->taskmgmt_quiesce_io = 0;
+	ioc->taskmgmt_in_progress = 0;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->ioc_reset_in_progress = 0;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+		ioc->alt_ioc->taskmgmt_in_progress = 0;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
+	dtmprintk(ioc,
+	    printk(MYIOC_s_DEBUG_FMT
+		"HardResetHandler: completed (%d seconds): %s\n", ioc->name,
+		jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
+		"SUCCESS" : "FAILED")));
 
 	return rc;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#ifdef CONFIG_FUSION_LOGGING
 static void
-EventDescriptionStr(u8 event, u32 evData0, char *evStr)
+mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 {
 	char *ds = NULL;
+	u32 evData0;
+	int ii;
+	u8 event;
+	char *evStr = ioc->evStr;
+
+	event = le32_to_cpu(pEventReply->Event) & 0xFF;
+	evData0 = le32_to_cpu(pEventReply->Data[0]);
 
 	switch(event) {
 	case MPI_EVENT_NONE:
@@ -6501,9 +7074,9 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
 			ds = "Loop State(LIP) Change";
 		else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
-			ds = "Loop State(LPE) Change";		/* ??? */
+			ds = "Loop State(LPE) Change";
 		else
-			ds = "Loop State(LPB) Change";		/* ??? */
+			ds = "Loop State(LPB) Change";
 		break;
 	case MPI_EVENT_LOGOUT:
 		ds = "Logout";
@@ -6703,28 +7276,65 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	}
 	case MPI_EVENT_IR2:
 	{
+		u8 id = (u8)(evData0);
+		u8 channel = (u8)(evData0 >> 8);
+		u8 phys_num = (u8)(evData0 >> 24);
 		u8 ReasonCode = (u8)(evData0 >> 16);
+
 		switch (ReasonCode) {
 		case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
-			ds = "IR2: LD State Changed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: LD State Changed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
-			ds = "IR2: PD State Changed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD State Changed "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
-			ds = "IR2: Bad Block Table Full";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Bad Block Table Full: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_INSERTED:
-			ds = "IR2: PD Inserted";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD Inserted: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_REMOVED:
-			ds = "IR2: PD Removed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD Removed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
-			ds = "IR2: Foreign CFG Detected";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Foreign CFG Detected: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
-			ds = "IR2: Rebuild Medium Error";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Rebuild Medium Error: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
+			break;
+		case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Dual Port Added: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
+			break;
+		case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Dual Port Removed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		default:
 			ds = "IR2";
@@ -6760,13 +7370,18 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
 	{
 		u8 reason = (u8)(evData0);
-		u8 port_num = (u8)(evData0 >> 8);
-		u16 handle = le16_to_cpu(evData0 >> 16);
 
-		snprintf(evStr, EVENT_DESCR_STR_SZ,
-		    "SAS Initiator Device Status Change: reason=0x%02x "
-		    "port=%d handle=0x%04x",
-		    reason, port_num, handle);
+		switch (reason) {
+		case MPI_EVENT_SAS_INIT_RC_ADDED:
+			ds = "SAS Initiator Status Change: Added";
+			break;
+		case MPI_EVENT_SAS_INIT_RC_REMOVED:
+			ds = "SAS Initiator Status Change: Deleted";
+			break;
+		default:
+			ds = "SAS Initiator Status Change";
+			break;
+		}
 		break;
 	}
 
@@ -6814,6 +7429,24 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	}
 
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+	{
+		u8 reason = (u8)(evData0);
+
+		switch (reason) {
+		case MPI_EVENT_SAS_EXP_RC_ADDED:
+			ds = "Expander Status Change: Added";
+			break;
+		case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
+			ds = "Expander Status Change: Deleted";
+			break;
+		default:
+			ds = "Expander Status Change";
+			break;
+		}
+		break;
+	}
+
 	/*
 	 *  MPT base "custom" events may be added here...
 	 */
@@ -6823,8 +7456,20 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	}
 	if (ds)
 		strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
-}
 
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "MPT event:(%02Xh) : %s\n",
+	    ioc->name, event, evStr));
+
+	devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
+	    ": Event data:\n"));
+	for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
+		devtverboseprintk(ioc, printk(" %08x",
+		    le32_to_cpu(pEventReply->Data[ii])));
+	devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
+}
+#endif
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	ProcessEventNotification - Route EventNotificationReply to all event handlers
@@ -6841,37 +7486,24 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 {
 	u16 evDataLen;
 	u32 evData0 = 0;
-//	u32 evCtx;
 	int ii;
 	u8 cb_idx;
 	int r = 0;
 	int handlers = 0;
-	char evStr[EVENT_DESCR_STR_SZ];
 	u8 event;
 
 	/*
 	 *  Do platform normalization of values
 	 */
 	event = le32_to_cpu(pEventReply->Event) & 0xFF;
-//	evCtx = le32_to_cpu(pEventReply->EventContext);
 	evDataLen = le16_to_cpu(pEventReply->EventDataLength);
 	if (evDataLen) {
 		evData0 = le32_to_cpu(pEventReply->Data[0]);
 	}
 
-	EventDescriptionStr(event, evData0, evStr);
-	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event:(%02Xh) : %s\n",
-			ioc->name,
-			event,
-			evStr));
-
 #ifdef CONFIG_FUSION_LOGGING
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": Event data:\n", ioc->name));
-	for (ii = 0; ii < evDataLen; ii++)
-		devtverboseprintk(ioc, printk(" %08x",
-		    le32_to_cpu(pEventReply->Data[ii])));
-	devtverboseprintk(ioc, printk("\n"));
+	if (evDataLen)
+		mpt_display_event_info(ioc, pEventReply);
 #endif
 
 	/*
@@ -6926,8 +7558,9 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	 */
 	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
 		if (MptEvHandlers[cb_idx]) {
-			devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Routing Event to event handler #%d\n",
-					ioc->name, cb_idx));
+			devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			    "Routing Event to event handler #%d\n",
+			    ioc->name, cb_idx));
 			r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
 			handlers++;
 		}
@@ -7011,8 +7644,6 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 	switch (info) {
 	case 0x00010000:
 		desc = "bug! MID not found";
-		if (ioc->reload_fw == 0)
-			ioc->reload_fw++;
 		break;
 
 	case 0x00020000:
@@ -7613,7 +8244,6 @@ EXPORT_SYMBOL(mpt_get_msg_frame);
 EXPORT_SYMBOL(mpt_put_msg_frame);
 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
 EXPORT_SYMBOL(mpt_free_msg_frame);
-EXPORT_SYMBOL(mpt_add_sge);
 EXPORT_SYMBOL(mpt_send_handshake_request);
 EXPORT_SYMBOL(mpt_verify_adapter);
 EXPORT_SYMBOL(mpt_GetIocState);
@@ -7650,7 +8280,7 @@ fusion_init(void)
 	/*  Register ourselves (mptbase) in order to facilitate
 	 *  EventNotification handling.
 	 */
-	mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER);
+	mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER);
 
 	/* Register for hard reset handling callbacks.
 	 */
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index b3e981d2a50..1c8514dc31c 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.07"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.07"
+#define MPT_LINUX_VERSION_COMMON	"3.04.10"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.09"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -104,6 +104,7 @@
 #endif
 
 #define MPT_NAME_LENGTH			32
+#define MPT_KOBJ_NAME_LEN		20
 
 #define MPT_PROCFS_MPTBASEDIR		"mpt"
 						/* chg it to "driver/fusion" ? */
@@ -134,6 +135,7 @@
 
 #define MPT_COALESCING_TIMEOUT		0x10
 
+
 /*
  * SCSI transfer rate defines.
  */
@@ -161,10 +163,10 @@
 /*
  * Set the MAX_SGE value based on user input.
  */
-#ifdef  CONFIG_FUSION_MAX_SGE
-#if     CONFIG_FUSION_MAX_SGE  < 16
+#ifdef CONFIG_FUSION_MAX_SGE
+#if CONFIG_FUSION_MAX_SGE  < 16
 #define MPT_SCSI_SG_DEPTH	16
-#elif   CONFIG_FUSION_MAX_SGE  > 128
+#elif CONFIG_FUSION_MAX_SGE  > 128
 #define MPT_SCSI_SG_DEPTH	128
 #else
 #define MPT_SCSI_SG_DEPTH	CONFIG_FUSION_MAX_SGE
@@ -173,6 +175,18 @@
 #define MPT_SCSI_SG_DEPTH	40
 #endif
 
+#ifdef CONFIG_FUSION_MAX_FC_SGE
+#if CONFIG_FUSION_MAX_FC_SGE  < 16
+#define MPT_SCSI_FC_SG_DEPTH	16
+#elif CONFIG_FUSION_MAX_FC_SGE  > 256
+#define MPT_SCSI_FC_SG_DEPTH	256
+#else
+#define MPT_SCSI_FC_SG_DEPTH	CONFIG_FUSION_MAX_FC_SGE
+#endif
+#else
+#define MPT_SCSI_FC_SG_DEPTH	40
+#endif
+
 /* debug print string length used for events and iocstatus */
 # define EVENT_DESCR_STR_SZ             100
 
@@ -431,38 +445,36 @@ do { \
  *	IOCTL structure and associated defines
  */
 
-#define MPT_IOCTL_STATUS_DID_IOCRESET	0x01	/* IOC Reset occurred on the current*/
-#define MPT_IOCTL_STATUS_RF_VALID	0x02	/* The Reply Frame is VALID */
-#define MPT_IOCTL_STATUS_TIMER_ACTIVE	0x04	/* The timer is running */
-#define MPT_IOCTL_STATUS_SENSE_VALID	0x08	/* Sense data is valid */
-#define MPT_IOCTL_STATUS_COMMAND_GOOD	0x10	/* Command Status GOOD */
-#define MPT_IOCTL_STATUS_TMTIMER_ACTIVE	0x20	/* The TM timer is running */
-#define MPT_IOCTL_STATUS_TM_FAILED	0x40	/* User TM request failed */
-
 #define MPTCTL_RESET_OK			0x01	/* Issue Bus Reset */
 
-typedef struct _MPT_IOCTL {
-	struct _MPT_ADAPTER	*ioc;
-	u8			 ReplyFrame[MPT_DEFAULT_FRAME_SIZE];	/* reply frame data */
-	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
-	int			 wait_done;	/* wake-up value for this ioc */
-	u8			 rsvd;
-	u8			 status;	/* current command status */
-	u8			 reset;		/* 1 if bus reset allowed */
-	u8			 id;		/* target for reset */
-	struct mutex		 ioctl_mutex;
-} MPT_IOCTL;
-
-#define MPT_SAS_MGMT_STATUS_RF_VALID	0x02	/* The Reply Frame is VALID */
-#define MPT_SAS_MGMT_STATUS_COMMAND_GOOD	0x10	/* Command Status GOOD */
-#define MPT_SAS_MGMT_STATUS_TM_FAILED	0x40	/* User TM request failed */
-
-typedef struct _MPT_SAS_MGMT {
+#define MPT_MGMT_STATUS_RF_VALID	0x01	/* The Reply Frame is VALID */
+#define MPT_MGMT_STATUS_COMMAND_GOOD	0x02	/* Command Status GOOD */
+#define MPT_MGMT_STATUS_PENDING		0x04	/* command is pending */
+#define MPT_MGMT_STATUS_DID_IOCRESET	0x08	/* IOC Reset occurred
+						   on the current*/
+#define MPT_MGMT_STATUS_SENSE_VALID	0x10	/* valid sense info */
+#define MPT_MGMT_STATUS_TIMER_ACTIVE	0x20	/* obsolete */
+#define MPT_MGMT_STATUS_FREE_MF		0x40	/* free the mf from
+						   complete routine */
+
+#define INITIALIZE_MGMT_STATUS(status) \
+	status = MPT_MGMT_STATUS_PENDING;
+#define CLEAR_MGMT_STATUS(status) \
+	status = 0;
+#define CLEAR_MGMT_PENDING_STATUS(status) \
+	status &= ~MPT_MGMT_STATUS_PENDING;
+#define SET_MGMT_MSG_CONTEXT(msg_context, value) \
+	msg_context = value;
+
+typedef struct _MPT_MGMT {
 	struct mutex		 mutex;
 	struct completion	 done;
 	u8			 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
+	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
 	u8			 status;	/* current command status */
-}MPT_SAS_MGMT;
+	int			 completion_code;
+	u32			 msg_context;
+} MPT_MGMT;
 
 /*
  *  Event Structure and define
@@ -564,6 +576,10 @@ struct mptfc_rport_info
 	u8		flags;
 };
 
+typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
+typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
+		dma_addr_t dma_addr);
+
 /*
  *  Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
  */
@@ -573,6 +589,10 @@ typedef struct _MPT_ADAPTER
 	int			 pci_irq;	/* This irq           */
 	char			 name[MPT_NAME_LENGTH];	/* "iocN"             */
 	char			 prod_name[MPT_NAME_LENGTH];	/* "LSIFC9x9"         */
+#ifdef CONFIG_FUSION_LOGGING
+	/* used in mpt_display_event_info */
+	char			 evStr[EVENT_DESCR_STR_SZ];
+#endif
 	char			 board_name[16];
 	char			 board_assembly[16];
 	char			 board_tracer[16];
@@ -600,6 +620,10 @@ typedef struct _MPT_ADAPTER
 	int			 reply_depth;	/* Num Allocated reply frames */
 	int			 reply_sz;	/* Reply frame size */
 	int			 num_chain;	/* Number of chain buffers */
+	MPT_ADD_SGE              add_sge;       /* Pointer to add_sge
+						   function */
+	MPT_ADD_CHAIN		 add_chain;	/* Pointer to add_chain
+						   function */
 		/* Pool of buffers for chaining. ReqToChain
 		 * and ChainToChain track index of chain buffers.
 		 * ChainBuffer (DMA) virt/phys addresses.
@@ -640,11 +664,8 @@ typedef struct _MPT_ADAPTER
 	RaidCfgData		raid_data;	/* Raid config. data */
 	SasCfgData		sas_data;	/* Sas config. data */
 	FcCfgData		fc_data;	/* Fc config. data */
-	MPT_IOCTL		*ioctl;		/* ioctl data pointer */
 	struct proc_dir_entry	*ioc_dentry;
 	struct _MPT_ADAPTER	*alt_ioc;	/* ptr to 929 bound adapter port */
-	spinlock_t		 diagLock;	/* diagnostic reset lock */
-	int			 diagPending;
 	u32			 biosVersion;	/* BIOS version from IO Unit Page 2 */
 	int			 eventTypes;	/* Event logging parameters */
 	int			 eventContext;	/* Next event context */
@@ -652,7 +673,6 @@ typedef struct _MPT_ADAPTER
 	struct _mpt_ioctl_events *events;	/* pointer to event log */
 	u8			*cached_fw;	/* Pointer to FW */
 	dma_addr_t	 	cached_fw_dma;
-	struct list_head	 configQ;	/* linked list of config. requests */
 	int			 hs_reply_idx;
 #ifndef MFCNT
 	u32			 pad0;
@@ -665,9 +685,6 @@ typedef struct _MPT_ADAPTER
 	IOCFactsReply_t		 facts;
 	PortFactsReply_t	 pfacts[2];
 	FCPortPage0_t		 fc_port_page0[2];
-	struct timer_list	 persist_timer;	/* persist table timer */
-	int			 persist_wait_done; /* persist completion flag */
-	u8			 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */
 	LANPage0_t		 lan_cnfg_page0;
 	LANPage1_t		 lan_cnfg_page1;
 
@@ -682,23 +699,44 @@ typedef struct _MPT_ADAPTER
 	int			 aen_event_read_flag; /* flag to indicate event log was read*/
 	u8			 FirstWhoInit;
 	u8			 upload_fw;	/* If set, do a fw upload */
-	u8			 reload_fw;	/* Force a FW Reload on next reset */
 	u8			 NBShiftFactor;  /* NB Shift Factor based on Block Size (Facts)  */
 	u8			 pad1[4];
 	u8			 DoneCtx;
 	u8			 TaskCtx;
 	u8			 InternalCtx;
-	spinlock_t		 initializing_hba_lock;
-	int 	 		 initializing_hba_lock_flag;
 	struct list_head	 list;
 	struct net_device	*netdev;
 	struct list_head	 sas_topology;
 	struct mutex		 sas_topology_mutex;
+
+	struct workqueue_struct	*fw_event_q;
+	struct list_head	 fw_event_list;
+	spinlock_t		 fw_event_lock;
+	u8			 fw_events_off; /* if '1', then ignore events */
+	char 			 fw_event_q_name[MPT_KOBJ_NAME_LEN];
+
 	struct mutex		 sas_discovery_mutex;
 	u8			 sas_discovery_runtime;
 	u8			 sas_discovery_ignore_events;
+
+	/* port_info object for the host */
+	struct mptsas_portinfo	*hba_port_info;
+	u64			 hba_port_sas_addr;
+	u16			 hba_port_num_phy;
+	struct list_head	 sas_device_info_list;
+	struct mutex		 sas_device_info_mutex;
+	u8			 old_sas_discovery_protocal;
+	u8			 sas_discovery_quiesce_io;
 	int			 sas_index; /* index refrencing */
-	MPT_SAS_MGMT		 sas_mgmt;
+	MPT_MGMT		 sas_mgmt;
+	MPT_MGMT		 mptbase_cmds; /* for sending config pages */
+	MPT_MGMT		 internal_cmds;
+	MPT_MGMT		 taskmgmt_cmds;
+	MPT_MGMT		 ioctl_cmds;
+	spinlock_t		 taskmgmt_lock; /* diagnostic reset lock */
+	int			 taskmgmt_in_progress;
+	u8			 taskmgmt_quiesce_io;
+	u8			 ioc_reset_in_progress;
 	struct work_struct	 sas_persist_task;
 
 	struct work_struct	 fc_setup_reset_work;
@@ -707,15 +745,27 @@ typedef struct _MPT_ADAPTER
 	u8			 fc_link_speed[2];
 	spinlock_t		 fc_rescan_work_lock;
 	struct work_struct	 fc_rescan_work;
-	char			 fc_rescan_work_q_name[20];
+	char			 fc_rescan_work_q_name[MPT_KOBJ_NAME_LEN];
 	struct workqueue_struct *fc_rescan_work_q;
+
+	/* driver forced bus resets count */
+	unsigned long		  hard_resets;
+	/* fw/external bus resets count */
+	unsigned long		  soft_resets;
+	/* cmd timeouts */
+	unsigned long		  timeouts;
+
 	struct scsi_cmnd	**ScsiLookup;
 	spinlock_t		  scsi_lookup_lock;
-
-	char			 reset_work_q_name[20];
+	u64			dma_mask;
+	u32			  broadcast_aen_busy;
+	char			 reset_work_q_name[MPT_KOBJ_NAME_LEN];
 	struct workqueue_struct *reset_work_q;
 	struct delayed_work	 fault_reset_work;
-	spinlock_t		 fault_reset_work_lock;
+
+	u8			sg_addr_size;
+	u8			in_rescan;
+	u8			SGE_size;
 
 } MPT_ADAPTER;
 
@@ -753,13 +803,14 @@ typedef struct _mpt_sge {
 	dma_addr_t	Address;
 } MptSge_t;
 
-#define mpt_addr_size() \
-	((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \
-		MPI_SGE_FLAGS_32_BIT_ADDRESSING)
 
-#define mpt_msg_flags() \
-	((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
-		MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32)
+#define mpt_msg_flags(ioc) \
+	(ioc->sg_addr_size == sizeof(u64)) ?		\
+	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : 		\
+	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32
+
+#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \
+	(MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -835,22 +886,14 @@ typedef struct _MPT_SCSI_HOST {
 		/* Pool of memory for holding SCpnts before doing
 		 * OS callbacks. freeQ is the free pool.
 		 */
-	u8			  tmPending;
-	u8			  resetPending;
 	u8			  negoNvram;		/* DV disabled, nego NVRAM */
 	u8			  pad1;
-	u8                        tmState;
 	u8			  rsvd[2];
 	MPT_FRAME_HDR		 *cmdPtr;		/* Ptr to nonOS request */
 	struct scsi_cmnd	 *abortSCpnt;
 	MPT_LOCAL_REPLY		  localReply;		/* internal cmd reply struct */
-	unsigned long		  hard_resets;		/* driver forced bus resets count */
-	unsigned long		  soft_resets;		/* fw/external bus resets count */
-	unsigned long		  timeouts;		/* cmd timeouts */
 	ushort			  sel_timeout[MPT_MAX_FC_DEVICES];
 	char 			  *info_kbuf;
-	wait_queue_head_t	  scandv_waitq;
-	int			  scandv_wait_done;
 	long			  last_queue_full;
 	u16			  tm_iocstatus;
 	u16			  spi_pending;
@@ -870,21 +913,16 @@ struct scsi_cmnd;
  * Generic structure passed to the base mpt_config function.
  */
 typedef struct _x_config_parms {
-	struct list_head	 linkage;	/* linked list */
-	struct timer_list	 timer;		/* timer function for this request  */
 	union {
 		ConfigExtendedPageHeader_t	*ehdr;
 		ConfigPageHeader_t	*hdr;
 	} cfghdr;
 	dma_addr_t		 physAddr;
-	int			 wait_done;	/* wait for this request */
 	u32			 pageAddr;	/* properly formatted */
+	u16			 status;
 	u8			 action;
 	u8			 dir;
 	u8			 timeout;	/* seconds */
-	u8			 pad1;
-	u16			 status;
-	u16			 pad2;
 } CONFIGPARMS;
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -909,7 +947,6 @@ extern MPT_FRAME_HDR	*mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc);
 extern void	 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 extern void	 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 extern void	 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-extern void	 mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr);
 
 extern int	 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
 extern int	 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
@@ -922,6 +959,12 @@ extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc);
 extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 extern int	 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern int	mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+		pRaidPhysDiskPage1_t phys_disk);
+extern int	mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc,
+		u8 phys_disk_num);
+extern int	 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
+extern void	 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
 extern void     mpt_halt_firmware(MPT_ADAPTER *ioc);
 
 
@@ -959,7 +1002,6 @@ extern int mpt_fwfault_debug;
 #define MPT_SGE_FLAGS_END_OF_BUFFER		(0x40000000)
 #define MPT_SGE_FLAGS_LOCAL_ADDRESS		(0x08000000)
 #define MPT_SGE_FLAGS_DIRECTION			(0x04000000)
-#define MPT_SGE_FLAGS_ADDRESSING		(mpt_addr_size() << MPI_SGE_FLAGS_SHIFT)
 #define MPT_SGE_FLAGS_END_OF_LIST		(0x01000000)
 
 #define MPT_SGE_FLAGS_TRANSACTION_ELEMENT	(0x00000000)
@@ -972,14 +1014,12 @@ extern int mpt_fwfault_debug;
 	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
 	 MPT_SGE_FLAGS_END_OF_LIST |	\
 	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_SGE_FLAGS_ADDRESSING | \
 	 MPT_TRANSFER_IOC_TO_HOST)
 #define MPT_SGE_FLAGS_SSIMPLE_WRITE \
 	(MPT_SGE_FLAGS_LAST_ELEMENT |	\
 	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
 	 MPT_SGE_FLAGS_END_OF_LIST |	\
 	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_SGE_FLAGS_ADDRESSING | \
 	 MPT_TRANSFER_HOST_TO_IOC)
 
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index c63817117c0..9b2e2198aee 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -84,6 +84,7 @@ MODULE_VERSION(my_VERSION);
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
 static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS;
+static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS;
 
 static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
 
@@ -127,10 +128,7 @@ static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags
 		struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
 static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
 		struct buflist *buflist, MPT_ADAPTER *ioc);
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl);
-static int  mptctl_bus_reset(MPT_IOCTL *ioctl);
-static int mptctl_set_tm_flags(MPT_SCSI_HOST *hd);
-static void mptctl_free_tm_flags(MPT_ADAPTER *ioc);
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function);
 
 /*
  * Reset Handler cleanup function
@@ -183,10 +181,10 @@ mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
 	int rc = 0;
 
 	if (nonblock) {
-		if (!mutex_trylock(&ioc->ioctl->ioctl_mutex))
+		if (!mutex_trylock(&ioc->ioctl_cmds.mutex))
 			rc = -EAGAIN;
 	} else {
-		if (mutex_lock_interruptible(&ioc->ioctl->ioctl_mutex))
+		if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex))
 			rc = -ERESTARTSYS;
 	}
 	return rc;
@@ -202,99 +200,78 @@ mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
 static int
 mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 {
-	char *sense_data;
-	int sz, req_index;
-	u16 iocStatus;
-	u8 cmd;
+	char	*sense_data;
+	int	req_index;
+	int	sz;
 
-	if (req)
-		 cmd = req->u.hdr.Function;
-	else
-		return 1;
-	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tcompleting mpi function (0x%02X), req=%p, "
-	    "reply=%p\n", ioc->name,  req->u.hdr.Function, req, reply));
-
-	if (ioc->ioctl) {
-
-		if (reply==NULL) {
-
-			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_reply() NULL Reply "
-				"Function=%x!\n", ioc->name, cmd));
+	if (!req)
+		return 0;
 
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-			ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
+	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
+	    "(0x%02X), req=%p, reply=%p\n", ioc->name,  req->u.hdr.Function,
+	    req, reply));
 
-			/* We are done, issue wake up
-	 		*/
-			ioc->ioctl->wait_done = 1;
-			wake_up (&mptctl_wait);
-			return 1;
+	/*
+	 * Handling continuation of the same reply. Processing the first
+	 * reply, and eating the other replys that come later.
+	 */
+	if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext)
+		goto out_continuation;
 
-		}
+	ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 
-		/* Copy the reply frame (which much exist
-		 * for non-SCSI I/O) to the IOC structure.
-		 */
-		memcpy(ioc->ioctl->ReplyFrame, reply,
-			min(ioc->reply_sz, 4*reply->u.reply.MsgLength));
-		ioc->ioctl->status |= MPT_IOCTL_STATUS_RF_VALID;
+	if (!reply)
+		goto out;
 
-		/* Set the command status to GOOD if IOC Status is GOOD
-		 * OR if SCSI I/O cmd and data underrun or recovered error.
-		 */
-		iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
-		if (iocStatus  == MPI_IOCSTATUS_SUCCESS)
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-
-		if (iocStatus || reply->u.reply.IOCLogInfo)
-			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tiocstatus (0x%04X), "
-				"loginfo (0x%08X)\n", ioc->name,
-				iocStatus,
-				le32_to_cpu(reply->u.reply.IOCLogInfo)));
-
-		if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
-			(cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
-
-			if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
-				dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-					"\tscsi_status (0x%02x), scsi_state (0x%02x), "
-					"tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
-					reply->u.sreply.SCSIStatus,
-					reply->u.sreply.SCSIState,
-					le16_to_cpu(reply->u.sreply.TaskTag),
-					le32_to_cpu(reply->u.sreply.TransferCount)));
-
-			ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
-
-			if ((iocStatus == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN) ||
-			(iocStatus == MPI_IOCSTATUS_SCSI_RECOVERED_ERROR)) {
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-			}
-		}
+	ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength);
+	memcpy(ioc->ioctl_cmds.reply, reply, sz);
 
-		/* Copy the sense data - if present
-		 */
-		if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) &&
-			(reply->u.sreply.SCSIState &
-			 MPI_SCSI_STATE_AUTOSENSE_VALID)){
+	if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo)
+		dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name,
+		    le16_to_cpu(reply->u.reply.IOCStatus),
+		    le32_to_cpu(reply->u.reply.IOCLogInfo)));
+
+	if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+		(req->u.hdr.Function ==
+		 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
+
+		if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
+			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"scsi_status (0x%02x), scsi_state (0x%02x), "
+			"tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
+			reply->u.sreply.SCSIStatus,
+			reply->u.sreply.SCSIState,
+			le16_to_cpu(reply->u.sreply.TaskTag),
+			le32_to_cpu(reply->u.sreply.TransferCount)));
+
+		if (reply->u.sreply.SCSIState &
+			MPI_SCSI_STATE_AUTOSENSE_VALID) {
 			sz = req->u.scsireq.SenseBufferLength;
 			req_index =
 			    le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
-			sense_data =
-			    ((u8 *)ioc->sense_buf_pool +
+			sense_data = ((u8 *)ioc->sense_buf_pool +
 			     (req_index * MPT_SENSE_BUFFER_ALLOC));
-			memcpy(ioc->ioctl->sense, sense_data, sz);
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_SENSE_VALID;
+			memcpy(ioc->ioctl_cmds.sense, sense_data, sz);
+			ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID;
 		}
+	}
 
-		if (cmd == MPI_FUNCTION_SCSI_TASK_MGMT)
-			mptctl_free_tm_flags(ioc);
-
-		/* We are done, issue wake up
-		 */
-		ioc->ioctl->wait_done = 1;
-		wake_up (&mptctl_wait);
+ out:
+	/* We are done, issue wake up
+	 */
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT)
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->ioctl_cmds.done);
 	}
+
+ out_continuation:
+	if (reply && (reply->u.reply.MsgFlags &
+	    MPI_MSGFLAGS_CONTINUATION_REPLY))
+		return 0;
 	return 1;
 }
 
@@ -304,30 +281,66 @@ mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
  * Expecting an interrupt, however timed out.
  *
  */
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
+static void
+mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 {
-	int rc = 1;
+	unsigned long flags;
 
-	if (ioctl == NULL)
-		return;
-	dctlprintk(ioctl->ioc,
-		   printk(MYIOC_s_DEBUG_FMT ": Timeout Expired! Host %d\n",
-		   ioctl->ioc->name, ioctl->ioc->id));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
+		ioc->name, __func__));
 
-	ioctl->wait_done = 0;
-	if (ioctl->reset & MPTCTL_RESET_OK)
-		rc = mptctl_bus_reset(ioctl);
+	if (mpt_fwfault_debug)
+		mpt_halt_firmware(ioc);
 
-	if (rc) {
-		/* Issue a reset for this device.
-		 * The IOC is not responding.
-		 */
-		dctlprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
-			 ioctl->ioc->name));
-		mpt_HardResetHandler(ioctl->ioc, CAN_SLEEP);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+		mpt_free_msg_frame(ioc, mf);
+		return;
 	}
-	return;
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
 
+	if (!mptctl_bus_reset(ioc, mf->u.hdr.Function))
+		return;
+
+	/* Issue a reset for this device.
+	 * The IOC is not responding.
+	 */
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
+		 ioc->name));
+	CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+	mpt_HardResetHandler(ioc, CAN_SLEEP);
+	mpt_free_msg_frame(ioc, mf);
+}
+
+static int
+mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+{
+	if (!mf)
+		return 0;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt completed (mf=%p, mr=%p)\n",
+		ioc->name, mf, mr));
+
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+
+	if (!mr)
+		goto out;
+
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->taskmgmt_cmds.reply, mr,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+ out:
+	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->taskmgmt_cmds.done);
+		return 1;
+	}
+	return 0;
 }
 
 /* mptctl_bus_reset
@@ -335,133 +348,150 @@ static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
  * Bus reset code.
  *
  */
-static int mptctl_bus_reset(MPT_IOCTL *ioctl)
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
-	MPT_SCSI_HOST	*hd;
+	SCSITaskMgmtReply_t *pScsiTmReply;
 	int		 ii;
-	int		 retval=0;
-
-
-	ioctl->reset &= ~MPTCTL_RESET_OK;
-
-	if (ioctl->ioc->sh == NULL)
+	int		 retval;
+	unsigned long	 timeout;
+	unsigned long	 time_count;
+	u16		 iocstatus;
+
+	/* bus reset is only good for SCSI IO, RAID PASSTHRU */
+	if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) ||
+	    (function == MPI_FUNCTION_SCSI_IO_REQUEST)) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"TaskMgmt, not SCSI_IO!!\n", ioc->name));
 		return -EPERM;
+	}
 
-	hd = shost_priv(ioctl->ioc->sh);
-	if (hd == NULL)
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 		return -EPERM;
+	}
 
-	/* Single threading ....
-	 */
-	if (mptctl_set_tm_flags(hd) != 0)
-		return -EPERM;
+	retval = 0;
 
 	/* Send request
 	 */
-	if ((mf = mpt_get_msg_frame(mptctl_id, ioctl->ioc)) == NULL) {
-		dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt, no msg frames!!\n",
-				ioctl->ioc->name));
-
-		mptctl_free_tm_flags(ioctl->ioc);
-		return -ENOMEM;
+	mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc);
+	if (mf == NULL) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"TaskMgmt, no msg frames!!\n", ioc->name));
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		retval = -ENOMEM;
+		goto mptctl_bus_reset_done;
 	}
 
-	dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
-			ioctl->ioc->name, mf));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+		ioc->name, mf));
 
 	pScsiTm = (SCSITaskMgmt_t *) mf;
-	pScsiTm->TargetID = ioctl->id;
-	pScsiTm->Bus = hd->port;	/* 0 */
-	pScsiTm->ChainOffset = 0;
+	memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
 	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
-	pScsiTm->Reserved = 0;
 	pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS;
-	pScsiTm->Reserved1 = 0;
 	pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
-
+	pScsiTm->TargetID = 0;
+	pScsiTm->Bus = 0;
+	pScsiTm->ChainOffset = 0;
+	pScsiTm->Reserved = 0;
+	pScsiTm->Reserved1 = 0;
+	pScsiTm->TaskMsgContext = 0;
 	for (ii= 0; ii < 8; ii++)
 		pScsiTm->LUN[ii] = 0;
-
 	for (ii=0; ii < 7; ii++)
 		pScsiTm->Reserved2[ii] = 0;
 
-	pScsiTm->TaskMsgContext = 0;
-	dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT
-		"mptctl_bus_reset: issued.\n", ioctl->ioc->name));
-
-	DBG_DUMP_TM_REQUEST_FRAME(ioctl->ioc, (u32 *)mf);
+	switch (ioc->bus_type) {
+	case FC:
+		timeout = 40;
+		break;
+	case SAS:
+		timeout = 30;
+		break;
+	case SPI:
+	default:
+		timeout = 2;
+		break;
+	}
 
-	ioctl->wait_done=0;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt type=%d timeout=%ld\n",
+		ioc->name, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, timeout));
 
-	if ((ioctl->ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
-	    (ioctl->ioc->facts.MsgVersion >= MPI_VERSION_01_05))
-		mpt_put_msg_frame_hi_pri(mptctl_id, ioctl->ioc, mf);
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	time_count = jiffies;
+	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
+	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
+		mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf);
 	else {
-		retval = mpt_send_handshake_request(mptctl_id, ioctl->ioc,
-			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
+		retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc,
+		    sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP);
 		if (retval != 0) {
-			dfailprintk(ioctl->ioc, printk(MYIOC_s_ERR_FMT "_send_handshake FAILED!"
-				" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
-				hd->ioc, mf));
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"TaskMgmt send_handshake FAILED!"
+				" (ioc %p, mf %p, rc=%d) \n", ioc->name,
+				ioc, mf, retval));
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
 			goto mptctl_bus_reset_done;
 		}
 	}
 
 	/* Now wait for the command to complete */
-	ii = wait_event_timeout(mptctl_wait,
-	     ioctl->wait_done == 1,
-	     HZ*5 /* 5 second timeout */);
+	ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
+		mpt_free_msg_frame(ioc, mf);
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			retval = 0;
+		else
+			retval = -1; /* return failure */
+		goto mptctl_bus_reset_done;
+	}
 
-	if(ii <=0 && (ioctl->wait_done != 1 ))  {
-		mpt_free_msg_frame(hd->ioc, mf);
-		ioctl->wait_done = 0;
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
+		retval = -1; /* return failure */
+		goto mptctl_bus_reset_done;
+	}
+
+	pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, "
+	    "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, "
+	    "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus,
+	    pScsiTmReply->TargetID, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+	    le16_to_cpu(pScsiTmReply->IOCStatus),
+	    le32_to_cpu(pScsiTmReply->IOCLogInfo),
+	    pScsiTmReply->ResponseCode,
+	    le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+
+	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SUCCESS)
+		retval = 0;
+	else {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
 		retval = -1; /* return failure */
 	}
 
-mptctl_bus_reset_done:
 
-	mptctl_free_tm_flags(ioctl->ioc);
+ mptctl_bus_reset_done:
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
 	return retval;
 }
 
-static int
-mptctl_set_tm_flags(MPT_SCSI_HOST *hd) {
-	unsigned long flags;
-
-	spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
-
-	if (hd->tmState == TM_STATE_NONE) {
-		hd->tmState = TM_STATE_IN_PROGRESS;
-		hd->tmPending = 1;
-		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
-	} else {
-		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static void
-mptctl_free_tm_flags(MPT_ADAPTER *ioc)
-{
-	MPT_SCSI_HOST * hd;
-	unsigned long flags;
-
-	hd = shost_priv(ioc->sh);
-	if (hd == NULL)
-		return;
-
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-
-	hd->tmState = TM_STATE_NONE;
-	hd->tmPending = 0;
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	return;
-}
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /* mptctl_ioc_reset
@@ -473,22 +503,23 @@ mptctl_free_tm_flags(MPT_ADAPTER *ioc)
 static int
 mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	MPT_IOCTL *ioctl = ioc->ioctl;
-	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC %s_reset routed to IOCTL driver!\n", ioc->name,
-		reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-		reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	if(ioctl == NULL)
-		return 1;
-
 	switch(reset_phase) {
 	case MPT_IOC_SETUP_RESET:
-		ioctl->status |= MPT_IOCTL_STATUS_DID_IOCRESET;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
 		break;
 	case MPT_IOC_POST_RESET:
-		ioctl->status &= ~MPT_IOCTL_STATUS_DID_IOCRESET;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->ioctl_cmds.done);
+		}
 		break;
-	case MPT_IOC_PRE_RESET:
 	default:
 		break;
 	}
@@ -642,7 +673,7 @@ __mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	else
 		ret = -EINVAL;
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -758,6 +789,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	int			 sge_offset = 0;
 	u16			 iocstat;
 	pFWDownloadReply_t	 ReplyMsg = NULL;
+	unsigned long		 timeleft;
 
 	if (mpt_verify_adapter(ioc, &iocp) < 0) {
 		printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n",
@@ -841,8 +873,9 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	 *	96		8
 	 *	64		4
 	 */
-	maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - sizeof(FWDownloadTCSGE_t))
-			/ (sizeof(dma_addr_t) + sizeof(u32));
+	maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) -
+			sizeof(FWDownloadTCSGE_t))
+			/ iocp->SGE_size;
 	if (numfrags > maxfrags) {
 		ret = -EMLINK;
 		goto fwdl_out;
@@ -870,7 +903,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 		if (nib == 0 || nib == 3) {
 			;
 		} else if (sgIn->Address) {
-			mpt_add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
+			iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
 			n++;
 			if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
 				printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
@@ -882,7 +915,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 		}
 		sgIn++;
 		bl++;
-		sgOut += (sizeof(dma_addr_t) + sizeof(u32));
+		sgOut += iocp->SGE_size;
 	}
 
 	DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags);
@@ -891,16 +924,30 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	 * Finally, perform firmware download.
 	 */
 	ReplyMsg = NULL;
+	SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext);
+	INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status)
 	mpt_put_msg_frame(mptctl_id, iocp, mf);
 
 	/* Now wait for the command to complete */
-	ret = wait_event_timeout(mptctl_wait,
-	     iocp->ioctl->wait_done == 1,
-	     HZ*60);
+retry_wait:
+	timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60);
+	if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+		if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(iocp, mf);
+			goto fwdl_out;
+		}
+		if (!timeleft)
+			mptctl_timeout_expired(iocp, mf);
+		else
+			goto retry_wait;
+		goto fwdl_out;
+	}
 
-	if(ret <=0 && (iocp->ioctl->wait_done != 1 )) {
-	/* Now we need to reset the board */
-		mptctl_timeout_expired(iocp->ioctl);
+	if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+		mpt_free_msg_frame(iocp, mf);
 		ret = -ENODATA;
 		goto fwdl_out;
 	}
@@ -908,7 +955,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	if (sgl)
 		kfree_sgl(sgl, sgl_dma, buflist, iocp);
 
-	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl->ReplyFrame;
+	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
 	iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
 	if (iocstat == MPI_IOCSTATUS_SUCCESS) {
 		printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
@@ -932,6 +979,9 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	return 0;
 
 fwdl_out:
+
+	CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status);
+	SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0);
         kfree_sgl(sgl, sgl_dma, buflist, iocp);
 	return ret;
 }
@@ -1003,7 +1053,7 @@ kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
 	 *
 	 */
 	sgl = sglbuf;
-	sg_spill = ((ioc->req_sz - sge_offset)/(sizeof(dma_addr_t) + sizeof(u32))) - 1;
+	sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1;
 	while (bytes_allocd < bytes) {
 		this_alloc = min(alloc_sz, bytes-bytes_allocd);
 		buflist[buflist_ent].len = this_alloc;
@@ -1024,8 +1074,9 @@ kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
 			dma_addr_t dma_addr;
 
 			bytes_allocd += this_alloc;
-			sgl->FlagsLength = (0x10000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|this_alloc);
-			dma_addr = pci_map_single(ioc->pcidev, buflist[buflist_ent].kptr, this_alloc, dir);
+			sgl->FlagsLength = (0x10000000|sgdir|this_alloc);
+			dma_addr = pci_map_single(ioc->pcidev,
+				buflist[buflist_ent].kptr, this_alloc, dir);
 			sgl->Address = dma_addr;
 
 			fragcnt++;
@@ -1771,7 +1822,10 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	int		msgContext;
 	u16		req_idx;
 	ulong 		timeout;
+	unsigned long	timeleft;
 	struct scsi_device *sdev;
+	unsigned long	 flags;
+	u8		 function;
 
 	/* bufIn and bufOut are used for user to kernel space transfers
 	 */
@@ -1784,24 +1838,23 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				__FILE__, __LINE__, iocnum);
 		return -ENODEV;
 	}
-	if (!ioc->ioctl) {
-		printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
-			"No memory available during driver init.\n",
-				__FILE__, __LINE__);
-		return -ENOMEM;
-	} else if (ioc->ioctl->status & MPT_IOCTL_STATUS_DID_IOCRESET) {
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 		printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
-			"Busy with IOC Reset \n", __FILE__, __LINE__);
+			"Busy with diagnostic reset\n", __FILE__, __LINE__);
 		return -EBUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
 	/* Verify that the final request frame will not be too large.
 	 */
 	sz = karg.dataSgeOffset * 4;
 	if (karg.dataInSize > 0)
-		sz += sizeof(dma_addr_t) + sizeof(u32);
+		sz += ioc->SGE_size;
 	if (karg.dataOutSize > 0)
-		sz += sizeof(dma_addr_t) + sizeof(u32);
+		sz += ioc->SGE_size;
 
 	if (sz > ioc->req_sz) {
 		printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1827,10 +1880,12 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 		printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 			"Unable to read MF from mpt_ioctl_command struct @ %p\n",
 			ioc->name, __FILE__, __LINE__, mfPtr);
+		function = -1;
 		rc = -EFAULT;
 		goto done_free_mem;
 	}
 	hdr->MsgContext = cpu_to_le32(msgContext);
+	function = hdr->Function;
 
 
 	/* Verify that this request is allowed.
@@ -1838,7 +1893,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
 	    ioc->name, hdr->Function, mf));
 
-	switch (hdr->Function) {
+	switch (function) {
 	case MPI_FUNCTION_IOC_FACTS:
 	case MPI_FUNCTION_PORT_FACTS:
 		karg.dataOutSize  = karg.dataInSize = 0;
@@ -1893,7 +1948,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			}
 
 			pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
-			pScsiReq->MsgFlags |= mpt_msg_flags();
+			pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
 
 
 			/* verify that app has not requested
@@ -1935,8 +1990,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			pScsiReq->Control = cpu_to_le32(scsidir | qtag);
 			pScsiReq->DataLength = cpu_to_le32(dataSize);
 
-			ioc->ioctl->reset = MPTCTL_RESET_OK;
-			ioc->ioctl->id = pScsiReq->TargetID;
 
 		} else {
 			printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1979,7 +2032,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			int dataSize;
 
 			pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
-			pScsiReq->MsgFlags |= mpt_msg_flags();
+			pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
 
 
 			/* verify that app has not requested
@@ -2014,8 +2067,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			pScsiReq->Control = cpu_to_le32(scsidir | qtag);
 			pScsiReq->DataLength = cpu_to_le32(dataSize);
 
-			ioc->ioctl->reset = MPTCTL_RESET_OK;
-			ioc->ioctl->id = pScsiReq->TargetID;
 		} else {
 			printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 				"SCSI driver is not loaded. \n",
@@ -2026,20 +2077,17 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 		break;
 
 	case MPI_FUNCTION_SCSI_TASK_MGMT:
-		{
-			MPT_SCSI_HOST *hd = NULL;
-			if ((ioc->sh == NULL) || ((hd = shost_priv(ioc->sh)) == NULL)) {
-				printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
-					"SCSI driver not loaded or SCSI host not found. \n",
-					ioc->name, __FILE__, __LINE__);
-				rc = -EFAULT;
-				goto done_free_mem;
-			} else if (mptctl_set_tm_flags(hd) != 0) {
-				rc = -EPERM;
-				goto done_free_mem;
-			}
-		}
+	{
+		SCSITaskMgmt_t	*pScsiTm;
+		pScsiTm = (SCSITaskMgmt_t *)mf;
+		dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"\tTaskType=0x%x MsgFlags=0x%x "
+			"TaskMsgContext=0x%x id=%d channel=%d\n",
+			ioc->name, pScsiTm->TaskType, le32_to_cpu
+			(pScsiTm->TaskMsgContext), pScsiTm->MsgFlags,
+			pScsiTm->TargetID, pScsiTm->Bus));
 		break;
+	}
 
 	case MPI_FUNCTION_IOC_INIT:
 		{
@@ -2123,8 +2171,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			if (karg.dataInSize > 0) {
 				flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 						MPI_SGE_FLAGS_END_OF_BUFFER |
-						MPI_SGE_FLAGS_DIRECTION |
-						mpt_addr_size() )
+						MPI_SGE_FLAGS_DIRECTION)
 						<< MPI_SGE_FLAGS_SHIFT;
 			} else {
 				flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
@@ -2141,8 +2188,8 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				/* Set up this SGE.
 				 * Copy to MF and to sglbuf
 				 */
-				mpt_add_sge(psge, flagsLength, dma_addr_out);
-				psge += (sizeof(u32) + sizeof(dma_addr_t));
+				ioc->add_sge(psge, flagsLength, dma_addr_out);
+				psge += ioc->SGE_size;
 
 				/* Copy user data to kernel space.
 				 */
@@ -2175,18 +2222,25 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				/* Set up this SGE
 				 * Copy to MF and to sglbuf
 				 */
-				mpt_add_sge(psge, flagsLength, dma_addr_in);
+				ioc->add_sge(psge, flagsLength, dma_addr_in);
 			}
 		}
 	} else  {
 		/* Add a NULL SGE
 		 */
-		mpt_add_sge(psge, flagsLength, (dma_addr_t) -1);
+		ioc->add_sge(psge, flagsLength, (dma_addr_t) -1);
 	}
 
-	ioc->ioctl->wait_done = 0;
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext);
+	INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
 	if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
 
+		mutex_lock(&ioc->taskmgmt_cmds.mutex);
+		if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+			mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			goto done_free_mem;
+		}
+
 		DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
 
 		if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
@@ -2197,10 +2251,11 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
 			if (rc != 0) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				    "_send_handshake FAILED! (ioc %p, mf %p)\n",
+				    "send_handshake FAILED! (ioc %p, mf %p)\n",
 				    ioc->name, ioc, mf));
-				mptctl_free_tm_flags(ioc);
+				mpt_clear_taskmgmt_in_progress_flag(ioc);
 				rc = -ENODATA;
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 				goto done_free_mem;
 			}
 		}
@@ -2210,36 +2265,47 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 	/* Now wait for the command to complete */
 	timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
-	timeout = wait_event_timeout(mptctl_wait,
-	     ioc->ioctl->wait_done == 1,
-	     HZ*timeout);
-
-	if(timeout <=0 && (ioc->ioctl->wait_done != 1 )) {
-	/* Now we need to reset the board */
-
-		if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT)
-			mptctl_free_tm_flags(ioc);
-
-		mptctl_timeout_expired(ioc->ioctl);
-		rc = -ENODATA;
+retry_wait:
+	timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+				HZ*timeout);
+	if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		rc = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
+		    ioc->name, __func__));
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			goto done_free_mem;
+		}
+		if (!timeleft) {
+			if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			mptctl_timeout_expired(ioc, mf);
+			mf = NULL;
+		} else
+			goto retry_wait;
 		goto done_free_mem;
 	}
 
+	if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+
 	mf = NULL;
 
 	/* If a valid reply frame, copy to the user.
 	 * Offset 2: reply length in U32's
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID) {
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) {
 		if (karg.maxReplyBytes < ioc->reply_sz) {
-			 sz = min(karg.maxReplyBytes, 4*ioc->ioctl->ReplyFrame[2]);
+			sz = min(karg.maxReplyBytes,
+				4*ioc->ioctl_cmds.reply[2]);
 		} else {
-			 sz = min(ioc->reply_sz, 4*ioc->ioctl->ReplyFrame[2]);
+			 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]);
 		}
-
 		if (sz > 0) {
 			if (copy_to_user(karg.replyFrameBufPtr,
-				 &ioc->ioctl->ReplyFrame, sz)){
+				 ioc->ioctl_cmds.reply, sz)){
 				 printk(MYIOC_s_ERR_FMT
 				     "%s@%d::mptctl_do_mpt_command - "
 				 "Unable to write out reply frame %p\n",
@@ -2252,10 +2318,11 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 	/* If valid sense data, copy to user.
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_SENSE_VALID) {
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) {
 		sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
 		if (sz > 0) {
-			if (copy_to_user(karg.senseDataPtr, ioc->ioctl->sense, sz)) {
+			if (copy_to_user(karg.senseDataPtr,
+				ioc->ioctl_cmds.sense, sz)) {
 				printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 				"Unable to write sense data to user %p\n",
 				ioc->name, __FILE__, __LINE__,
@@ -2269,7 +2336,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	/* If the overall status is _GOOD and data in, copy data
 	 * to user.
 	 */
-	if ((ioc->ioctl->status & MPT_IOCTL_STATUS_COMMAND_GOOD) &&
+	if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) &&
 				(karg.dataInSize > 0) && (bufIn.kptr)) {
 
 		if (copy_to_user(karg.dataInBufPtr,
@@ -2284,9 +2351,8 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 done_free_mem:
 
-	ioc->ioctl->status &= ~(MPT_IOCTL_STATUS_COMMAND_GOOD |
-		MPT_IOCTL_STATUS_SENSE_VALID |
-		MPT_IOCTL_STATUS_RF_VALID );
+	CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
 
 	/* Free the allocated memory.
 	 */
@@ -2336,6 +2402,8 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	ToolboxIstwiReadWriteRequest_t	*IstwiRWRequest;
 	MPT_FRAME_HDR		*mf = NULL;
 	MPIHeader_t		*mpi_hdr;
+	unsigned long		timeleft;
+	int			retval;
 
 	/* Reset long to int. Should affect IA64 and SPARC only
 	 */
@@ -2466,9 +2534,9 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 		MPT_SCSI_HOST *hd =  shost_priv(ioc->sh);
 
 		if (hd && (cim_rev == 1)) {
-			karg.hard_resets = hd->hard_resets;
-			karg.soft_resets = hd->soft_resets;
-			karg.timeouts = hd->timeouts;
+			karg.hard_resets = ioc->hard_resets;
+			karg.soft_resets = ioc->soft_resets;
+			karg.timeouts = ioc->timeouts;
 		}
 	}
 
@@ -2476,8 +2544,8 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	 * Gather ISTWI(Industry Standard Two Wire Interface) Data
 	 */
 	if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__func__));
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, no msg frames!!\n", ioc->name, __func__));
 		goto out;
 	}
 
@@ -2498,22 +2566,29 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
 	if (!pbuf)
 		goto out;
-	mpt_add_sge((char *)&IstwiRWRequest->SGL,
+	ioc->add_sge((char *)&IstwiRWRequest->SGL,
 	    (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
 
-	ioc->ioctl->wait_done = 0;
+	retval = 0;
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context,
+				IstwiRWRequest->MsgContext);
+	INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
 	mpt_put_msg_frame(mptctl_id, ioc, mf);
 
-	rc = wait_event_timeout(mptctl_wait,
-	     ioc->ioctl->wait_done == 1,
-	     HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
-
-	if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
-		/*
-		 * Now we need to reset the board
-		 */
-		mpt_free_msg_frame(ioc, mf);
-		mptctl_timeout_expired(ioc->ioctl);
+retry_wait:
+	timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+			HZ*MPT_IOCTL_DEFAULT_TIMEOUT);
+	if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = -ETIME;
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(ioc, mf);
+			goto out;
+		}
+		if (!timeleft)
+			mptctl_timeout_expired(ioc, mf);
+		else
+			goto retry_wait;
 		goto out;
 	}
 
@@ -2526,10 +2601,13 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	 *   bays have drives in them
 	 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)
 		karg.rsvd = *(u32 *)pbuf;
 
  out:
+	CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
+
 	if (pbuf)
 		pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
 
@@ -2753,7 +2831,7 @@ compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd,
 
 	ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -2807,7 +2885,7 @@ compat_mpt_command(struct file *filp, unsigned int cmd,
 	 */
 	ret = mptctl_do_mpt_command (karg, &uarg->MF);
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -2859,21 +2937,10 @@ static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long a
 static int
 mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	MPT_IOCTL *mem;
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 
-	/*
-	 * Allocate and inite a MPT_IOCTL structure
-	*/
-	mem = kzalloc(sizeof(MPT_IOCTL), GFP_KERNEL);
-	if (!mem) {
-		mptctl_remove(pdev);
-		return -ENOMEM;
-	}
-
-	ioc->ioctl = mem;
-	ioc->ioctl->ioc = ioc;
-	mutex_init(&ioc->ioctl->ioctl_mutex);
+	mutex_init(&ioc->ioctl_cmds.mutex);
+	init_completion(&ioc->ioctl_cmds.done);
 	return 0;
 }
 
@@ -2887,9 +2954,6 @@ mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 static void
 mptctl_remove(struct pci_dev *pdev)
 {
-	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
-
-	kfree ( ioc->ioctl );
 }
 
 static struct mpt_pci_driver mptctl_driver = {
@@ -2929,6 +2993,7 @@ static int __init mptctl_init(void)
 		goto out_fail;
 	}
 
+	mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER);
 	mpt_reset_register(mptctl_id, mptctl_ioc_reset);
 	mpt_event_register(mptctl_id, mptctl_event_process);
 
@@ -2953,6 +3018,7 @@ static void mptctl_exit(void)
 
 	/* De-register callback handler from base module */
 	mpt_deregister(mptctl_id);
+	mpt_reset_deregister(mptctl_taskmgmt_id);
 
         mpt_device_driver_deregister(MPTCTL_DRIVER);
 
diff --git a/drivers/message/fusion/mptdebug.h b/drivers/message/fusion/mptdebug.h
index 510b9f49209..28e47887928 100644
--- a/drivers/message/fusion/mptdebug.h
+++ b/drivers/message/fusion/mptdebug.h
@@ -58,6 +58,7 @@
 #define MPT_DEBUG_FC			0x00080000
 #define MPT_DEBUG_SAS			0x00100000
 #define MPT_DEBUG_SAS_WIDE		0x00200000
+#define MPT_DEBUG_36GB_MEM              0x00400000
 
 /*
  * CONFIG_FUSION_LOGGING - enabled in Kconfig
@@ -135,6 +136,8 @@
 #define dsaswideprintk(IOC, CMD)		\
 	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
 
+#define d36memprintk(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_36GB_MEM)
 
 
 /*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c3c24fdf9fb..e61df133a59 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1251,17 +1251,15 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -1292,9 +1290,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -1312,8 +1307,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	hd->timer.data = (unsigned long) hd;
 	hd->timer.function = mptscsih_timer_expired;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 
 	sh->transportt = mptfc_transport_template;
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index c2804f26cb4..a9e48e28b1d 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -703,7 +703,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 
 		printk (KERN_ERR "%s: no tx context available: %u\n",
 			__func__, priv->mpt_txfidx_tail);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	mf = mpt_get_msg_frame(LanCtx, mpt_dev);
@@ -713,7 +713,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 
 		printk (KERN_ERR "%s: Unable to alloc request frame\n",
 			__func__);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	ctx = priv->mpt_txfidx[priv->mpt_txfidx_tail--];
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 79f5433359f..20e0b447e8e 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -93,8 +93,37 @@ static u8	mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
 static u8	mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
 static u8	mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
 static u8	mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
-
-static void mptsas_hotplug_work(struct work_struct *work);
+static u8	mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS;
+
+static void mptsas_firmware_event_work(struct work_struct *work);
+static void mptsas_send_sas_event(struct fw_event_work *fw_event);
+static void mptsas_send_raid_event(struct fw_event_work *fw_event);
+static void mptsas_send_ir2_event(struct fw_event_work *fw_event);
+static void mptsas_parse_device_info(struct sas_identify *identify,
+		struct mptsas_devinfo *device_info);
+static inline void mptsas_set_rphy(MPT_ADAPTER *ioc,
+		struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy);
+static struct mptsas_phyinfo	*mptsas_find_phyinfo_by_sas_address
+		(MPT_ADAPTER *ioc, u64 sas_address);
+static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc,
+	struct mptsas_devinfo *device_info, u32 form, u32 form_specific);
+static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc,
+	struct mptsas_enclosure *enclosure, u32 form, u32 form_specific);
+static int mptsas_add_end_device(MPT_ADAPTER *ioc,
+	struct mptsas_phyinfo *phy_info);
+static void mptsas_del_end_device(MPT_ADAPTER *ioc,
+	struct mptsas_phyinfo *phy_info);
+static void mptsas_send_link_status_event(struct fw_event_work *fw_event);
+static struct mptsas_portinfo	*mptsas_find_portinfo_by_sas_address
+		(MPT_ADAPTER *ioc, u64 sas_address);
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+		struct mptsas_portinfo *port_info, u8 force);
+static void mptsas_send_expander_event(struct fw_event_work *fw_event);
+static void mptsas_not_responding_devices(MPT_ADAPTER *ioc);
+static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc);
+static void mptsas_broadcast_primative_work(struct fw_event_work *fw_event);
+static void mptsas_handle_queue_full_event(struct fw_event_work *fw_event);
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id);
 
 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
 					MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -218,30 +247,125 @@ static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
 	    le16_to_cpu(pg1->AttachedDevHandle)));
 }
 
-static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
+/* inhibit sas firmware event handling */
+static void
+mptsas_fw_event_off(MPT_ADAPTER *ioc)
 {
-	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
-	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	ioc->fw_events_off = 1;
+	ioc->sas_discovery_quiesce_io = 0;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
 }
 
-static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
+/* enable sas firmware event handling */
+static void
+mptsas_fw_event_on(MPT_ADAPTER *ioc)
 {
-	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
-	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	ioc->fw_events_off = 0;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
-static struct mptsas_portinfo *
-mptsas_get_hba_portinfo(MPT_ADAPTER *ioc)
+/* queue a sas firmware event */
+static void
+mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
 {
-	struct list_head	*head = &ioc->sas_topology;
-	struct mptsas_portinfo	*pi = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_add_tail(&fw_event->list, &ioc->fw_event_list);
+	INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)\n",
+	    ioc->name, __func__, fw_event));
+	queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+	    delay);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* requeue a sas firmware event */
+static void
+mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task "
+	    "(fw_event=0x%p)\n", ioc->name, __func__, fw_event));
+	fw_event->retries++;
+	queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+	    msecs_to_jiffies(delay));
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* free memory assoicated to a sas firmware event */
+static void
+mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n",
+	    ioc->name, __func__, fw_event));
+	list_del(&fw_event->list);
+	kfree(fw_event);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* walk the firmware event queue, and either stop or wait for
+ * outstanding events to complete */
+static void
+mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event, *next;
+	struct mptsas_target_reset_event *target_reset_list, *n;
+	u8	flush_q;
+	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
+
+	/* flush the target_reset_list */
+	if (!list_empty(&hd->target_reset_list)) {
+		list_for_each_entry_safe(target_reset_list, n,
+		    &hd->target_reset_list, list) {
+			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			    "%s: removing target reset for id=%d\n",
+			    ioc->name, __func__,
+			   target_reset_list->sas_event_data.TargetID));
+			list_del(&target_reset_list->list);
+			kfree(target_reset_list);
+		}
+	}
+
+	if (list_empty(&ioc->fw_event_list) ||
+	     !ioc->fw_event_q || in_interrupt())
+		return;
 
-	/* always the first entry on sas_topology list */
+	flush_q = 0;
+	list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
+		if (cancel_delayed_work(&fw_event->work))
+			mptsas_free_fw_event(ioc, fw_event);
+		else
+			flush_q = 1;
+	}
+	if (flush_q)
+		flush_workqueue(ioc->fw_event_q);
+}
 
-	if (!list_empty(head))
-		pi = list_entry(head->next, struct mptsas_portinfo, list);
 
-	return pi;
+static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
+{
+	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+}
+
+static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
+{
+	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
 }
 
 /*
@@ -265,6 +389,38 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
 	return rc;
 }
 
+/**
+ *	mptsas_find_portinfo_by_sas_address -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@handle:
+ *
+ *	This function should be called with the sas_topology_mutex already held
+ *
+ **/
+static struct mptsas_portinfo *
+mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
+{
+	struct mptsas_portinfo *port_info, *rc = NULL;
+	int i;
+
+	if (sas_address >= ioc->hba_port_sas_addr &&
+	    sas_address < (ioc->hba_port_sas_addr +
+	    ioc->hba_port_num_phy))
+		return ioc->hba_port_info;
+
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_for_each_entry(port_info, &ioc->sas_topology, list)
+		for (i = 0; i < port_info->num_phys; i++)
+			if (port_info->phy_info[i].identify.sas_address ==
+			    sas_address) {
+				rc = port_info;
+				goto out;
+			}
+ out:
+	mutex_unlock(&ioc->sas_topology_mutex);
+	return rc;
+}
+
 /*
  * Returns true if there is a scsi end device
  */
@@ -308,6 +464,7 @@ mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_detai
 		if(phy_info->port_details != port_details)
 			continue;
 		memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+		mptsas_set_rphy(ioc, phy_info, NULL);
 		phy_info->port_details = NULL;
 	}
 	kfree(port_details);
@@ -379,6 +536,285 @@ starget)
 		phy_info->port_details->starget = starget;
 }
 
+/**
+ *	mptsas_add_device_component -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: fw mapped id's
+ *	@id:
+ *	@sas_address:
+ *	@device_info:
+ *
+ **/
+static void
+mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id,
+	u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id)
+{
+	struct mptsas_device_info	*sas_info, *next;
+	struct scsi_device	*sdev;
+	struct scsi_target	*starget;
+	struct sas_rphy	*rphy;
+
+	/*
+	 * Delete all matching devices out of the list
+	 */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+	    list) {
+		if (!sas_info->is_logical_volume &&
+		    (sas_info->sas_address == sas_address ||
+		    (sas_info->fw.channel == channel &&
+		     sas_info->fw.id == id))) {
+			list_del(&sas_info->list);
+			kfree(sas_info);
+		}
+	}
+
+	sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+	if (!sas_info)
+		goto out;
+
+	/*
+	 * Set Firmware mapping
+	 */
+	sas_info->fw.id = id;
+	sas_info->fw.channel = channel;
+
+	sas_info->sas_address = sas_address;
+	sas_info->device_info = device_info;
+	sas_info->slot = slot;
+	sas_info->enclosure_logical_id = enclosure_logical_id;
+	INIT_LIST_HEAD(&sas_info->list);
+	list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+
+	/*
+	 * Set OS mapping
+	 */
+	shost_for_each_device(sdev, ioc->sh) {
+		starget = scsi_target(sdev);
+		rphy = dev_to_rphy(starget->dev.parent);
+		if (rphy->identify.sas_address == sas_address) {
+			sas_info->os.id = starget->id;
+			sas_info->os.channel = starget->channel;
+		}
+	}
+
+ out:
+	mutex_unlock(&ioc->sas_device_info_mutex);
+	return;
+}
+
+/**
+ *	mptsas_add_device_component_by_fw -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel:  fw mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+	struct mptsas_devinfo sas_device;
+	struct mptsas_enclosure enclosure_info;
+	int rc;
+
+	rc = mptsas_sas_device_pg0(ioc, &sas_device,
+	    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+	     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+	    (channel << 8) + id);
+	if (rc)
+		return;
+
+	memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+	mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+	    (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+	     MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+	     sas_device.handle_enclosure);
+
+	mptsas_add_device_component(ioc, sas_device.channel,
+	    sas_device.id, sas_device.sas_address, sas_device.device_info,
+	    sas_device.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *	mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: fw mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc,
+		struct scsi_target *starget)
+{
+	CONFIGPARMS			cfg;
+	ConfigPageHeader_t		hdr;
+	dma_addr_t			dma_handle;
+	pRaidVolumePage0_t		buffer = NULL;
+	int				i;
+	RaidPhysDiskPage0_t 		phys_disk;
+	struct mptsas_device_info	*sas_info, *next;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+	/* assumption that all volumes on channel = 0 */
+	cfg.pageAddr = starget->id;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+	cfg.timeout = 10;
+
+	if (mpt_config(ioc, &cfg) != 0)
+		goto out;
+
+	if (!hdr.PageLength)
+		goto out;
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer)
+		goto out;
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+	if (mpt_config(ioc, &cfg) != 0)
+		goto out;
+
+	if (!buffer->NumPhysDisks)
+		goto out;
+
+	/*
+	 * Adding entry for hidden components
+	 */
+	for (i = 0; i < buffer->NumPhysDisks; i++) {
+
+		if (mpt_raid_phys_disk_pg0(ioc,
+		    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+			continue;
+
+		mptsas_add_device_component_by_fw(ioc, phys_disk.PhysDiskBus,
+		    phys_disk.PhysDiskID);
+
+		mutex_lock(&ioc->sas_device_info_mutex);
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (!sas_info->is_logical_volume &&
+			    (sas_info->fw.channel == phys_disk.PhysDiskBus &&
+			    sas_info->fw.id == phys_disk.PhysDiskID)) {
+				sas_info->is_hidden_raid_component = 1;
+				sas_info->volume_id = starget->id;
+			}
+		}
+		mutex_unlock(&ioc->sas_device_info_mutex);
+
+	}
+
+	/*
+	 * Delete all matching devices out of the list
+	 */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+	    list) {
+		if (sas_info->is_logical_volume && sas_info->fw.id ==
+		    starget->id) {
+			list_del(&sas_info->list);
+			kfree(sas_info);
+		}
+	}
+
+	sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+	if (sas_info) {
+		sas_info->fw.id = starget->id;
+		sas_info->os.id = starget->id;
+		sas_info->os.channel = starget->channel;
+		sas_info->is_logical_volume = 1;
+		INIT_LIST_HEAD(&sas_info->list);
+		list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+	}
+	mutex_unlock(&ioc->sas_device_info_mutex);
+
+ out:
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+}
+
+/**
+ *	mptsas_add_device_component_starget -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@starget:
+ *
+ **/
+static void
+mptsas_add_device_component_starget(MPT_ADAPTER *ioc,
+	struct scsi_target *starget)
+{
+	VirtTarget	*vtarget;
+	struct sas_rphy	*rphy;
+	struct mptsas_phyinfo	*phy_info = NULL;
+	struct mptsas_enclosure	enclosure_info;
+
+	rphy = dev_to_rphy(starget->dev.parent);
+	vtarget = starget->hostdata;
+	phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+			rphy->identify.sas_address);
+	if (!phy_info)
+		return;
+
+	memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+	mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+		(MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+		MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+		phy_info->attached.handle_enclosure);
+
+	mptsas_add_device_component(ioc, phy_info->attached.channel,
+		phy_info->attached.id, phy_info->attached.sas_address,
+		phy_info->attached.device_info,
+		phy_info->attached.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *	mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: os mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_del_device_component_by_os(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+	struct mptsas_device_info	*sas_info, *next;
+
+	/*
+	 * Set is_cached flag
+	 */
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+		list) {
+		if (sas_info->os.channel == channel && sas_info->os.id == id)
+			sas_info->is_cached = 1;
+	}
+}
+
+/**
+ *	mptsas_del_device_components - Cleaning the list
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_del_device_components(MPT_ADAPTER *ioc)
+{
+	struct mptsas_device_info	*sas_info, *next;
+
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+		list) {
+		list_del(&sas_info->list);
+		kfree(sas_info);
+	}
+	mutex_unlock(&ioc->sas_device_info_mutex);
+}
+
 
 /*
  * mptsas_setup_wide_ports
@@ -434,8 +870,8 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 		 * Forming a port
 		 */
 		if (!port_details) {
-			port_details = kzalloc(sizeof(*port_details),
-				GFP_KERNEL);
+			port_details = kzalloc(sizeof(struct
+				mptsas_portinfo_details), GFP_KERNEL);
 			if (!port_details)
 				goto out;
 			port_details->num_phys = 1;
@@ -523,15 +959,62 @@ mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id)
 	VirtTarget 			*vtarget = NULL;
 
 	shost_for_each_device(sdev, ioc->sh) {
-		if ((vdevice = sdev->hostdata) == NULL)
+		vdevice = sdev->hostdata;
+		if ((vdevice == NULL) ||
+			(vdevice->vtarget == NULL))
+			continue;
+		if ((vdevice->vtarget->tflags &
+		    MPT_TARGET_FLAGS_RAID_COMPONENT ||
+		    vdevice->vtarget->raidVolume))
 			continue;
 		if (vdevice->vtarget->id == id &&
-		    vdevice->vtarget->channel == channel)
+			vdevice->vtarget->channel == channel)
 			vtarget = vdevice->vtarget;
 	}
 	return vtarget;
 }
 
+static void
+mptsas_queue_device_delete(MPT_ADAPTER *ioc,
+	MpiEventDataSasDeviceStatusChange_t *sas_event_data)
+{
+	struct fw_event_work *fw_event;
+	int sz;
+
+	sz = offsetof(struct fw_event_work, event_data) +
+	    sizeof(MpiEventDataSasDeviceStatusChange_t);
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+		return;
+	}
+	memcpy(fw_event->event_data, sas_event_data,
+	    sizeof(MpiEventDataSasDeviceStatusChange_t));
+	fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+static void
+mptsas_queue_rescan(MPT_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+	int sz;
+
+	sz = offsetof(struct fw_event_work, event_data);
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+		return;
+	}
+	fw_event->event = -1;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+
 /**
  * mptsas_target_reset
  *
@@ -550,13 +1033,21 @@ mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
-
-	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
-		    ioc->name,__func__, __LINE__));
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0)
 		return 0;
+
+
+	mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+	if (mf == NULL) {
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, no msg frames @%d!!\n", ioc->name,
+			__func__, __LINE__));
+		goto out_fail;
 	}
 
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+		ioc->name, mf));
+
 	/* Format the Request
 	 */
 	pScsiTm = (SCSITaskMgmt_t *) mf;
@@ -569,9 +1060,18 @@ mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
 
 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
 
-	mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	   "TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n",
+	   ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id));
+
+	mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
 
 	return 1;
+
+ out_fail:
+
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
+	return 0;
 }
 
 /**
@@ -602,11 +1102,12 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
 
 	vtarget->deleted = 1; /* block IO */
 
-	target_reset_list = kzalloc(sizeof(*target_reset_list),
+	target_reset_list = kzalloc(sizeof(struct mptsas_target_reset_event),
 	    GFP_ATOMIC);
 	if (!target_reset_list) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__func__, __LINE__));
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, failed to allocate mem @%d..!!\n",
+			ioc->name, __func__, __LINE__));
 		return;
 	}
 
@@ -614,84 +1115,101 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
 		sizeof(*sas_event_data));
 	list_add_tail(&target_reset_list->list, &hd->target_reset_list);
 
-	if (hd->resetPending)
-		return;
+	target_reset_list->time_count = jiffies;
 
 	if (mptsas_target_reset(ioc, channel, id)) {
 		target_reset_list->target_reset_issued = 1;
-		hd->resetPending = 1;
 	}
 }
 
 /**
- * mptsas_dev_reset_complete
- *
- * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
- * enable work queue to finish off removing device from upper layers.
- * then send next TARGET_RESET in the queue.
- *
- * @ioc
+ *	mptsas_taskmgmt_complete - complete SAS task management function
+ *	@ioc: Pointer to MPT_ADAPTER structure
  *
+ *	Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work
+ *	queue to finish off removing device from upper layers. then send next
+ *	TARGET_RESET in the queue.
  **/
-static void
-mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
+static int
+mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 {
 	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
         struct list_head *head = &hd->target_reset_list;
-	struct mptsas_target_reset_event *target_reset_list;
-	struct mptsas_hotplug_event *ev;
-	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
 	u8		id, channel;
-	__le64		sas_address;
+	struct mptsas_target_reset_event	*target_reset_list;
+	SCSITaskMgmtReply_t *pScsiTmReply;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: "
+	    "(mf = %p, mr = %p)\n", ioc->name, mf, mr));
+
+	pScsiTmReply = (SCSITaskMgmtReply_t *)mr;
+	if (pScsiTmReply) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "\tTaskMgmt completed: fw_channel = %d, fw_id = %d,\n"
+		    "\ttask_type = 0x%02X, iocstatus = 0x%04X "
+		    "loginfo = 0x%08X,\n\tresponse_code = 0x%02X, "
+		    "term_cmnds = %d\n", ioc->name,
+		    pScsiTmReply->Bus, pScsiTmReply->TargetID,
+		    pScsiTmReply->TaskType,
+		    le16_to_cpu(pScsiTmReply->IOCStatus),
+		    le32_to_cpu(pScsiTmReply->IOCLogInfo),
+		    pScsiTmReply->ResponseCode,
+		    le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+		if (pScsiTmReply->ResponseCode)
+			mptscsih_taskmgmt_response_code(ioc,
+			pScsiTmReply->ResponseCode);
+	}
+
+	if (pScsiTmReply && (pScsiTmReply->TaskType ==
+	    MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK || pScsiTmReply->TaskType ==
+	     MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET)) {
+		ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+		ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+		memcpy(ioc->taskmgmt_cmds.reply, mr,
+		    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+			complete(&ioc->taskmgmt_cmds.done);
+			return 1;
+		}
+		return 0;
+	}
+
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
 
 	if (list_empty(head))
-		return;
+		return 1;
 
-	target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
+	target_reset_list = list_entry(head->next,
+	    struct mptsas_target_reset_event, list);
 
-	sas_event_data = &target_reset_list->sas_event_data;
-	id = sas_event_data->TargetID;
-	channel = sas_event_data->Bus;
-	hd->resetPending = 0;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt: completed (%d seconds)\n",
+	    ioc->name, jiffies_to_msecs(jiffies -
+	    target_reset_list->time_count)/1000));
+
+	id = pScsiTmReply->TargetID;
+	channel = pScsiTmReply->Bus;
+	target_reset_list->time_count = jiffies;
 
 	/*
 	 * retry target reset
 	 */
 	if (!target_reset_list->target_reset_issued) {
-		if (mptsas_target_reset(ioc, channel, id)) {
+		if (mptsas_target_reset(ioc, channel, id))
 			target_reset_list->target_reset_issued = 1;
-			hd->resetPending = 1;
-		}
-		return;
+		return 1;
 	}
 
 	/*
 	 * enable work queue to remove device from upper layers
 	 */
 	list_del(&target_reset_list->list);
+	if ((mptsas_find_vtarget(ioc, channel, id)) && !ioc->fw_events_off)
+		mptsas_queue_device_delete(ioc,
+			&target_reset_list->sas_event_data);
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__func__, __LINE__));
-		return;
-	}
-
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-	ev->parent_handle =
-	    le16_to_cpu(sas_event_data->ParentDevHandle);
-	ev->channel = channel;
-	ev->id =id;
-	ev->phy_id = sas_event_data->PhyNum;
-	memcpy(&sas_address, &sas_event_data->SASAddress,
-	    sizeof(__le64));
-	ev->sas_address = le64_to_cpu(sas_address);
-	ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-	ev->event_type = MPTSAS_DEL_DEVICE;
-	schedule_work(&ev->work);
-	kfree(target_reset_list);
 
 	/*
 	 * issue target reset to next device in the queue
@@ -699,34 +1217,19 @@ mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
 
 	head = &hd->target_reset_list;
 	if (list_empty(head))
-		return;
+		return 1;
 
 	target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
 	    list);
 
-	sas_event_data = &target_reset_list->sas_event_data;
-	id = sas_event_data->TargetID;
-	channel = sas_event_data->Bus;
+	id = target_reset_list->sas_event_data.TargetID;
+	channel = target_reset_list->sas_event_data.Bus;
+	target_reset_list->time_count = jiffies;
 
-	if (mptsas_target_reset(ioc, channel, id)) {
+	if (mptsas_target_reset(ioc, channel, id))
 		target_reset_list->target_reset_issued = 1;
-		hd->resetPending = 1;
-	}
-}
 
-/**
- * mptsas_taskmgmt_complete
- *
- * @ioc
- * @mf
- * @mr
- *
- **/
-static int
-mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
-{
-	mptsas_dev_reset_complete(ioc);
-	return mptscsih_taskmgmt_complete(ioc, mf, mr);
+	return 1;
 }
 
 /**
@@ -740,37 +1243,59 @@ static int
 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
-	struct mptsas_target_reset_event *target_reset_list, *n;
 	int rc;
 
 	rc = mptscsih_ioc_reset(ioc, reset_phase);
+	if ((ioc->bus_type != SAS) || (!rc))
+		return rc;
 
-	if (ioc->bus_type != SAS)
-		goto out;
-
-	if (reset_phase != MPT_IOC_POST_RESET)
-		goto out;
-
-	if (!ioc->sh || !ioc->sh->hostdata)
-		goto out;
 	hd = shost_priv(ioc->sh);
 	if (!hd->ioc)
 		goto out;
 
-	if (list_empty(&hd->target_reset_list))
-		goto out;
-
-	/* flush the target_reset_list */
-	list_for_each_entry_safe(target_reset_list, n,
-	    &hd->target_reset_list, list) {
-		list_del(&target_reset_list->list);
-		kfree(target_reset_list);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		mptsas_fw_event_off(ioc);
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->sas_mgmt.done);
+		}
+		mptsas_cleanup_fw_event_q(ioc);
+		mptsas_queue_rescan(ioc);
+		mptsas_fw_event_on(ioc);
+		break;
+	default:
+		break;
 	}
 
  out:
 	return rc;
 }
 
+
+/**
+ * enum device_state -
+ * @DEVICE_RETRY: need to retry the TUR
+ * @DEVICE_ERROR: TUR return error, don't add device
+ * @DEVICE_READY: device can be added
+ *
+ */
+enum device_state{
+	DEVICE_RETRY,
+	DEVICE_ERROR,
+	DEVICE_READY,
+};
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 		u32 form, u32 form_specific)
@@ -836,15 +1361,308 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 	return error;
 }
 
+/**
+ *	mptsas_add_end_device - report a new end device to sas transport layer
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phy_info: decribes attached device
+ *
+ *	return (0) success (1) failure
+ *
+ **/
+static int
+mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct sas_identify identify;
+	char *ds = NULL;
+	u8 fw_id;
+
+	if (!phy_info) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: exit at line=%d\n", ioc->name,
+			 __func__, __LINE__));
+		return 1;
+	}
+
+	fw_id = phy_info->attached.id;
+
+	if (mptsas_get_rphy(phy_info)) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 2;
+	}
+
+	port = mptsas_get_port(phy_info);
+	if (!port) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 3;
+	}
+
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET)
+		ds = "ssp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET)
+		ds = "stp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+		ds = "sata";
+
+	printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
+	    " phy %d, sas_addr 0x%llx\n", ioc->name, ds,
+	    phy_info->attached.channel, phy_info->attached.id,
+	    phy_info->attached.phy_id, (unsigned long long)
+	    phy_info->attached.sas_address);
+
+	mptsas_parse_device_info(&identify, &phy_info->attached);
+	rphy = sas_end_device_alloc(port);
+	if (!rphy) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 5; /* non-fatal: an rphy can be added later */
+	}
+
+	rphy->identify = identify;
+	if (sas_rphy_add(rphy)) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		sas_rphy_free(rphy);
+		return 6;
+	}
+	mptsas_set_rphy(ioc, phy_info, rphy);
+	return 0;
+}
+
+/**
+ *	mptsas_del_end_device - report a deleted end device to sas transport layer
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phy_info: decribes attached device
+ *
+ **/
+static void
+mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct mptsas_portinfo *port_info;
+	struct mptsas_phyinfo *phy_info_parent;
+	int i;
+	char *ds = NULL;
+	u8 fw_id;
+	u64 sas_address;
+
+	if (!phy_info)
+		return;
+
+	fw_id = phy_info->attached.id;
+	sas_address = phy_info->attached.sas_address;
+
+	if (!phy_info->port_details) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+	rphy = mptsas_get_rphy(phy_info);
+	if (!rphy) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+
+	if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR
+		|| phy_info->attached.device_info
+			& MPI_SAS_DEVICE_INFO_SMP_INITIATOR
+		|| phy_info->attached.device_info
+			& MPI_SAS_DEVICE_INFO_STP_INITIATOR)
+		ds = "initiator";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET)
+		ds = "ssp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET)
+		ds = "stp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+		ds = "sata";
+
+	dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT
+	    "removing %s device: fw_channel %d, fw_id %d, phy %d,"
+	    "sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel,
+	    phy_info->attached.id, phy_info->attached.phy_id,
+	    (unsigned long long) sas_address);
+
+	port = mptsas_get_port(phy_info);
+	if (!port) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+	port_info = phy_info->portinfo;
+	phy_info_parent = port_info->phy_info;
+	for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) {
+		if (!phy_info_parent->phy)
+			continue;
+		if (phy_info_parent->attached.sas_address !=
+		    sas_address)
+			continue;
+		dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev,
+		    MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n",
+		    ioc->name, phy_info_parent->phy_id,
+		    phy_info_parent->phy);
+		sas_port_delete_phy(port, phy_info_parent->phy);
+	}
+
+	dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
+	    "delete port %d, sas_addr (0x%llx)\n", ioc->name,
+	     port->port_identifier, (unsigned long long)sas_address);
+	sas_port_delete(port);
+	mptsas_set_port(ioc, phy_info, NULL);
+	mptsas_port_delete(ioc, phy_info->port_details);
+}
+
+struct mptsas_phyinfo *
+mptsas_refreshing_device_handles(MPT_ADAPTER *ioc,
+	struct mptsas_devinfo *sas_device)
+{
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo *port_info;
+	int i;
+
+	phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+	    sas_device->sas_address);
+	if (!phy_info)
+		goto out;
+	port_info = phy_info->portinfo;
+	if (!port_info)
+		goto out;
+	mutex_lock(&ioc->sas_topology_mutex);
+	for (i = 0; i < port_info->num_phys; i++) {
+		if (port_info->phy_info[i].attached.sas_address !=
+			sas_device->sas_address)
+			continue;
+		port_info->phy_info[i].attached.channel = sas_device->channel;
+		port_info->phy_info[i].attached.id = sas_device->id;
+		port_info->phy_info[i].attached.sas_address =
+		    sas_device->sas_address;
+		port_info->phy_info[i].attached.handle = sas_device->handle;
+		port_info->phy_info[i].attached.handle_parent =
+		    sas_device->handle_parent;
+		port_info->phy_info[i].attached.handle_enclosure =
+		    sas_device->handle_enclosure;
+	}
+	mutex_unlock(&ioc->sas_topology_mutex);
+ out:
+	return phy_info;
+}
+
+/**
+ * mptsas_firmware_event_work - work thread for processing fw events
+ * @work: work queue payload containing info describing the event
+ * Context: user
+ *
+ */
+static void
+mptsas_firmware_event_work(struct work_struct *work)
+{
+	struct fw_event_work *fw_event =
+		container_of(work, struct fw_event_work, work.work);
+	MPT_ADAPTER *ioc = fw_event->ioc;
+
+	/* special rescan topology handling */
+	if (fw_event->event == -1) {
+		if (ioc->in_rescan) {
+			devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				"%s: rescan ignored as it is in progress\n",
+				ioc->name, __func__));
+			return;
+		}
+		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after "
+		    "reset\n", ioc->name, __func__));
+		ioc->in_rescan = 1;
+		mptsas_not_responding_devices(ioc);
+		mptsas_scan_sas_topology(ioc);
+		ioc->in_rescan = 0;
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	/* events handling turned off during host reset */
+	if (ioc->fw_events_off) {
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), "
+	    "event = (0x%02x)\n", ioc->name, __func__, fw_event,
+	    (fw_event->event & 0xFF)));
+
+	switch (fw_event->event) {
+	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		mptsas_send_sas_event(fw_event);
+		break;
+	case MPI_EVENT_INTEGRATED_RAID:
+		mptsas_send_raid_event(fw_event);
+		break;
+	case MPI_EVENT_IR2:
+		mptsas_send_ir2_event(fw_event);
+		break;
+	case MPI_EVENT_PERSISTENT_TABLE_FULL:
+		mptbase_sas_persist_operation(ioc,
+		    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
+		break;
+	case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+		mptsas_broadcast_primative_work(fw_event);
+		break;
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+		mptsas_send_expander_event(fw_event);
+		break;
+	case MPI_EVENT_SAS_PHY_LINK_STATUS:
+		mptsas_send_link_status_event(fw_event);
+		break;
+	case MPI_EVENT_QUEUE_FULL:
+		mptsas_handle_queue_full_event(fw_event);
+		break;
+	}
+}
+
+
+
 static int
 mptsas_slave_configure(struct scsi_device *sdev)
 {
+	struct Scsi_Host	*host = sdev->host;
+	MPT_SCSI_HOST	*hd = shost_priv(host);
+	MPT_ADAPTER	*ioc = hd->ioc;
+	VirtDevice	*vdevice = sdev->hostdata;
 
-	if (sdev->channel == MPTSAS_RAID_CHANNEL)
+	if (vdevice->vtarget->deleted) {
+		sdev_printk(KERN_INFO, sdev, "clearing deleted flag\n");
+		vdevice->vtarget->deleted = 0;
+	}
+
+	/*
+	 * RAID volumes placed beyond the last expected port.
+	 * Ignore sending sas mode pages in that case..
+	 */
+	if (sdev->channel == MPTSAS_RAID_CHANNEL) {
+		mptsas_add_device_component_starget_ir(ioc, scsi_target(sdev));
 		goto out;
+	}
 
 	sas_read_port_mode_page(sdev);
 
+	mptsas_add_device_component_starget(ioc, scsi_target(sdev));
+
  out:
 	return mptscsih_slave_configure(sdev);
 }
@@ -875,9 +1693,18 @@ mptsas_target_alloc(struct scsi_target *starget)
 	 * RAID volumes placed beyond the last expected port.
 	 */
 	if (starget->channel == MPTSAS_RAID_CHANNEL) {
-		for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
-			if (id == ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
-				channel = ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
+		if (!ioc->raid_data.pIocPg2) {
+			kfree(vtarget);
+			return -ENXIO;
+		}
+		for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+			if (id == ioc->raid_data.pIocPg2->
+					RaidVolume[i].VolumeID) {
+				channel = ioc->raid_data.pIocPg2->
+					RaidVolume[i].VolumeBus;
+			}
+		}
+		vtarget->raidVolume = 1;
 		goto out;
 	}
 
@@ -926,11 +1753,18 @@ mptsas_target_destroy(struct scsi_target *starget)
 	struct sas_rphy		*rphy;
 	struct mptsas_portinfo	*p;
 	int 			 i;
-	MPT_ADAPTER *ioc = hd->ioc;
+	MPT_ADAPTER	*ioc = hd->ioc;
+	VirtTarget	*vtarget;
 
 	if (!starget->hostdata)
 		return;
 
+	vtarget = starget->hostdata;
+
+	mptsas_del_device_component_by_os(ioc, starget->channel,
+	    starget->id);
+
+
 	if (starget->channel == MPTSAS_RAID_CHANNEL)
 		goto out;
 
@@ -940,12 +1774,21 @@ mptsas_target_destroy(struct scsi_target *starget)
 			if (p->phy_info[i].attached.sas_address !=
 					rphy->identify.sas_address)
 				continue;
+
+			starget_printk(KERN_INFO, starget, MYIOC_s_FMT
+			"delete device: fw_channel %d, fw_id %d, phy %d, "
+			"sas_addr 0x%llx\n", ioc->name,
+			p->phy_info[i].attached.channel,
+			p->phy_info[i].attached.id,
+			p->phy_info[i].attached.phy_id, (unsigned long long)
+			p->phy_info[i].attached.sas_address);
+
 			mptsas_set_starget(&p->phy_info[i], NULL);
-			goto out;
 		}
 	}
 
  out:
+	vtarget->starget = NULL;
 	kfree(starget->hostdata);
 	starget->hostdata = NULL;
 }
@@ -1008,6 +1851,8 @@ mptsas_slave_alloc(struct scsi_device *sdev)
 static int
 mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
+	MPT_SCSI_HOST	*hd;
+	MPT_ADAPTER	*ioc;
 	VirtDevice	*vdevice = SCpnt->device->hostdata;
 
 	if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) {
@@ -1016,6 +1861,12 @@ mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 		return 0;
 	}
 
+	hd = shost_priv(SCpnt->device->host);
+	ioc = hd->ioc;
+
+	if (ioc->sas_discovery_quiesce_io)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 //	scsi_print_command(SCpnt);
 
 	return mptscsih_qcmd(SCpnt,done);
@@ -1114,14 +1965,19 @@ static int mptsas_get_linkerrors(struct sas_phy *phy)
 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 		MPT_FRAME_HDR *reply)
 {
-	ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
+	ioc->sas_mgmt.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 	if (reply != NULL) {
-		ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
+		ioc->sas_mgmt.status |= MPT_MGMT_STATUS_RF_VALID;
 		memcpy(ioc->sas_mgmt.reply, reply,
 		    min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
 	}
-	complete(&ioc->sas_mgmt.done);
-	return 1;
+
+	if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+		ioc->sas_mgmt.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->sas_mgmt.done);
+		return 1;
+	}
+	return 0;
 }
 
 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
@@ -1160,6 +2016,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 		MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
 	req->PhyNum = phy->identify.phy_identifier;
 
+	INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
 	mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
@@ -1174,7 +2031,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 
 	/* a reply frame is expected */
 	if ((ioc->sas_mgmt.status &
-	    MPT_IOCTL_STATUS_RF_VALID) == 0) {
+	    MPT_MGMT_STATUS_RF_VALID) == 0) {
 		error = -ENXIO;
 		goto out_unlock;
 	}
@@ -1191,6 +2048,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 	error = 0;
 
  out_unlock:
+	CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
 	mutex_unlock(&ioc->sas_mgmt.mutex);
  out:
 	return error;
@@ -1304,7 +2162,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 		struct mptsas_portinfo *port_info;
 
 		mutex_lock(&ioc->sas_topology_mutex);
-		port_info = mptsas_get_hba_portinfo(ioc);
+		port_info = ioc->hba_port_info;
 		if (port_info && port_info->phy_info)
 			sas_address =
 				port_info->phy_info[0].phy->identify.sas_address;
@@ -1319,26 +2177,32 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	/* request */
 	flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 		       MPI_SGE_FLAGS_END_OF_BUFFER |
-		       MPI_SGE_FLAGS_DIRECTION |
-		       mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
+		       MPI_SGE_FLAGS_DIRECTION)
+		       << MPI_SGE_FLAGS_SHIFT;
 	flagsLength |= (blk_rq_bytes(req) - 4);
 
 	dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
 				      blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_out)
 		goto put_mf;
-	mpt_add_sge(psge, flagsLength, dma_addr_out);
-	psge += (sizeof(u32) + sizeof(dma_addr_t));
+	ioc->add_sge(psge, flagsLength, dma_addr_out);
+	psge += ioc->SGE_size;
 
 	/* response */
-	flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
+	flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+		MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+		MPI_SGE_FLAGS_IOC_TO_HOST |
+		MPI_SGE_FLAGS_END_OF_BUFFER;
+
+	flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
 	flagsLength |= blk_rq_bytes(rsp) + 4;
 	dma_addr_in =  pci_map_single(ioc->pcidev, bio_data(rsp->bio),
 				      blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_in)
 		goto unmap;
-	mpt_add_sge(psge, flagsLength, dma_addr_in);
+	ioc->add_sge(psge, flagsLength, dma_addr_in);
 
+	INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
 	mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
@@ -1351,7 +2215,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	}
 	mf = NULL;
 
-	if (ioc->sas_mgmt.status & MPT_IOCTL_STATUS_RF_VALID) {
+	if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) {
 		SmpPassthroughReply_t *smprep;
 
 		smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
@@ -1360,7 +2224,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 		req->resid_len = 0;
 		rsp->resid_len -= smprep->ResponseDataLength;
 	} else {
-		printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
+		printk(MYIOC_s_ERR_FMT
+		    "%s: smp passthru reply failed to be returned\n",
 		    ioc->name, __func__);
 		ret = -ENXIO;
 	}
@@ -1375,6 +2240,7 @@ put_mf:
 	if (mf)
 		mpt_free_msg_frame(ioc, mf);
 out_unlock:
+	CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
 	mutex_unlock(&ioc->sas_mgmt.mutex);
 out:
 	return ret;
@@ -1438,7 +2304,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 
 	port_info->num_phys = buffer->NumPhys;
 	port_info->phy_info = kcalloc(port_info->num_phys,
-		sizeof(*port_info->phy_info),GFP_KERNEL);
+		sizeof(struct mptsas_phyinfo), GFP_KERNEL);
 	if (!port_info->phy_info) {
 		error = -ENOMEM;
 		goto out_free_consistent;
@@ -1600,10 +2466,6 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 	__le64 sas_address;
 	int error=0;
 
-	if (ioc->sas_discovery_runtime &&
-		mptsas_is_end_device(device_info))
-			goto out;
-
 	hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 0;
@@ -1644,6 +2506,7 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 
 	mptsas_print_device_pg0(ioc, buffer);
 
+	memset(device_info, 0, sizeof(struct mptsas_devinfo));
 	device_info->handle = le16_to_cpu(buffer->DevHandle);
 	device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
 	device_info->handle_enclosure =
@@ -1675,7 +2538,9 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
 	SasExpanderPage0_t *buffer;
 	dma_addr_t dma_handle;
 	int i, error;
+	__le64 sas_address;
 
+	memset(port_info, 0, sizeof(struct mptsas_portinfo));
 	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 0;
@@ -1721,18 +2586,23 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
 	}
 
 	/* save config data */
-	port_info->num_phys = buffer->NumPhys;
+	port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1;
 	port_info->phy_info = kcalloc(port_info->num_phys,
-		sizeof(*port_info->phy_info),GFP_KERNEL);
+		sizeof(struct mptsas_phyinfo), GFP_KERNEL);
 	if (!port_info->phy_info) {
 		error = -ENOMEM;
 		goto out_free_consistent;
 	}
 
+	memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
 	for (i = 0; i < port_info->num_phys; i++) {
 		port_info->phy_info[i].portinfo = port_info;
 		port_info->phy_info[i].handle =
 		    le16_to_cpu(buffer->DevHandle);
+		port_info->phy_info[i].identify.sas_address =
+		    le64_to_cpu(sas_address);
+		port_info->phy_info[i].identify.handle_parent =
+		    le16_to_cpu(buffer->ParentDevHandle);
 	}
 
  out_free_consistent:
@@ -1752,11 +2622,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	dma_addr_t dma_handle;
 	int error=0;
 
-	if (ioc->sas_discovery_runtime &&
-		mptsas_is_end_device(&phy_info->attached))
-			goto out;
-
-	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
+	hdr.PageVersion = MPI_SASEXPANDER1_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 1;
 	hdr.Reserved1 = 0;
@@ -1791,6 +2657,12 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 
 	error = mpt_config(ioc, &cfg);
+
+	if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+		error = -ENODEV;
+		goto out;
+	}
+
 	if (error)
 		goto out_free_consistent;
 
@@ -2010,16 +2882,21 @@ static int mptsas_probe_one_phy(struct device *dev,
 				goto out;
 			}
 			mptsas_set_port(ioc, phy_info, port);
-			dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			    "sas_port_alloc: port=%p dev=%p port_id=%d\n",
-			    ioc->name, port, dev, port->port_identifier));
+			devtprintk(ioc, dev_printk(KERN_DEBUG, &port->dev,
+			    MYIOC_s_FMT "add port %d, sas_addr (0x%llx)\n",
+			    ioc->name, port->port_identifier,
+			    (unsigned long long)phy_info->
+			    attached.sas_address));
 		}
-		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
-		    ioc->name, phy_info->phy_id));
+		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"sas_port_add_phy: phy_id=%d\n",
+			ioc->name, phy_info->phy_id));
 		sas_port_add_phy(port, phy_info->phy);
 		phy_info->sas_port_add_phy = 0;
+		devtprintk(ioc, dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+		    MYIOC_s_FMT "add phy %d, phy-obj (0x%p)\n", ioc->name,
+		     phy_info->phy_id, phy_info->phy));
 	}
-
 	if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
 
 		struct sas_rphy *rphy;
@@ -2032,18 +2909,17 @@ static int mptsas_probe_one_phy(struct device *dev,
 		 * the adding/removing of devices that occur
 		 * after start of day.
 		 */
-		if (ioc->sas_discovery_runtime &&
-			mptsas_is_end_device(&phy_info->attached))
-				goto out;
+		if (mptsas_is_end_device(&phy_info->attached) &&
+		    phy_info->attached.handle_parent) {
+			goto out;
+		}
 
 		mptsas_parse_device_info(&identify, &phy_info->attached);
 		if (scsi_is_host_device(parent)) {
 			struct mptsas_portinfo *port_info;
 			int i;
 
-			mutex_lock(&ioc->sas_topology_mutex);
-			port_info = mptsas_get_hba_portinfo(ioc);
-			mutex_unlock(&ioc->sas_topology_mutex);
+			port_info = ioc->hba_port_info;
 
 			for (i = 0; i < port_info->num_phys; i++)
 				if (port_info->phy_info[i].identify.sas_address ==
@@ -2102,7 +2978,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 	struct mptsas_portinfo *port_info, *hba;
 	int error = -ENOMEM, i;
 
-	hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
+	hba = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
 	if (! hba)
 		goto out;
 
@@ -2112,9 +2988,10 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 
 	mptsas_sas_io_unit_pg1(ioc);
 	mutex_lock(&ioc->sas_topology_mutex);
-	port_info = mptsas_get_hba_portinfo(ioc);
+	port_info = ioc->hba_port_info;
 	if (!port_info) {
-		port_info = hba;
+		ioc->hba_port_info = port_info = hba;
+		ioc->hba_port_num_phy = port_info->num_phys;
 		list_add_tail(&port_info->list, &ioc->sas_topology);
 	} else {
 		for (i = 0; i < hba->num_phys; i++) {
@@ -2130,15 +3007,22 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 		hba = NULL;
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
+#if defined(CPQ_CIM)
+	ioc->num_ports = port_info->num_phys;
+#endif
 	for (i = 0; i < port_info->num_phys; i++) {
 		mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
 			(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
 			 MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
-
+		port_info->phy_info[i].identify.handle =
+		    port_info->phy_info[i].handle;
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-			 port_info->phy_info[i].handle);
+			 port_info->phy_info[i].identify.handle);
+		if (!ioc->hba_port_sas_addr)
+			ioc->hba_port_sas_addr =
+			    port_info->phy_info[i].identify.sas_address;
 		port_info->phy_info[i].identify.phy_id =
 		    port_info->phy_info[i].phy_id = i;
 		if (port_info->phy_info[i].attached.handle)
@@ -2163,248 +3047,721 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 	return error;
 }
 
-static int
-mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
+static void
+mptsas_expander_refresh(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 {
-	struct mptsas_portinfo *port_info, *p, *ex;
-	struct device *parent;
-	struct sas_rphy *rphy;
-	int error = -ENOMEM, i, j;
-
-	ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
-	if (!ex)
-		goto out;
-
-	error = mptsas_sas_expander_pg0(ioc, ex,
-	    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
-	     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
-	if (error)
-		goto out_free_port_info;
-
-	*handle = ex->phy_info[0].handle;
-
-	mutex_lock(&ioc->sas_topology_mutex);
-	port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
-	if (!port_info) {
-		port_info = ex;
-		list_add_tail(&port_info->list, &ioc->sas_topology);
-	} else {
-		for (i = 0; i < ex->num_phys; i++) {
-			port_info->phy_info[i].handle =
-				ex->phy_info[i].handle;
-			port_info->phy_info[i].port_id =
-				ex->phy_info[i].port_id;
-		}
-		kfree(ex->phy_info);
-		kfree(ex);
-		ex = NULL;
-	}
-	mutex_unlock(&ioc->sas_topology_mutex);
-
+	struct mptsas_portinfo *parent;
+	struct device *parent_dev;
+	struct sas_rphy	*rphy;
+	int		i;
+	u64		sas_address; /* expander sas address */
+	u32		handle;
+
+	handle = port_info->phy_info[0].handle;
+	sas_address = port_info->phy_info[0].identify.sas_address;
 	for (i = 0; i < port_info->num_phys; i++) {
 		mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
-			(MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
-			 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
-
-		if (port_info->phy_info[i].identify.handle) {
-			mptsas_sas_device_pg0(ioc,
-				&port_info->phy_info[i].identify,
-				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				port_info->phy_info[i].identify.handle);
-			port_info->phy_info[i].identify.phy_id =
-			    port_info->phy_info[i].phy_id;
-		}
+		    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
+		    MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + handle);
+
+		mptsas_sas_device_pg0(ioc,
+		    &port_info->phy_info[i].identify,
+		    (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+		    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    port_info->phy_info[i].identify.handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 
 		if (port_info->phy_info[i].attached.handle) {
 			mptsas_sas_device_pg0(ioc,
-				&port_info->phy_info[i].attached,
-				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				port_info->phy_info[i].attached.handle);
+			    &port_info->phy_info[i].attached,
+			    (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+			     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			    port_info->phy_info[i].attached.handle);
 			port_info->phy_info[i].attached.phy_id =
 			    port_info->phy_info[i].phy_id;
 		}
 	}
 
-	parent = &ioc->sh->shost_gendev;
-	for (i = 0; i < port_info->num_phys; i++) {
-		mutex_lock(&ioc->sas_topology_mutex);
-		list_for_each_entry(p, &ioc->sas_topology, list) {
-			for (j = 0; j < p->num_phys; j++) {
-				if (port_info->phy_info[i].identify.handle !=
-						p->phy_info[j].attached.handle)
-					continue;
-				rphy = mptsas_get_rphy(&p->phy_info[j]);
-				parent = &rphy->dev;
-			}
-		}
+	mutex_lock(&ioc->sas_topology_mutex);
+	parent = mptsas_find_portinfo_by_handle(ioc,
+	    port_info->phy_info[0].identify.handle_parent);
+	if (!parent) {
 		mutex_unlock(&ioc->sas_topology_mutex);
+		return;
 	}
+	for (i = 0, parent_dev = NULL; i < parent->num_phys && !parent_dev;
+	    i++) {
+		if (parent->phy_info[i].attached.sas_address == sas_address) {
+			rphy = mptsas_get_rphy(&parent->phy_info[i]);
+			parent_dev = &rphy->dev;
+		}
+	}
+	mutex_unlock(&ioc->sas_topology_mutex);
 
 	mptsas_setup_wide_ports(ioc, port_info);
-
 	for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
-		mptsas_probe_one_phy(parent, &port_info->phy_info[i],
+		mptsas_probe_one_phy(parent_dev, &port_info->phy_info[i],
 		    ioc->sas_index, 0);
+}
 
-	return 0;
+static void
+mptsas_expander_event_add(MPT_ADAPTER *ioc,
+    MpiEventDataSasExpanderStatusChange_t *expander_data)
+{
+	struct mptsas_portinfo *port_info;
+	int i;
+	__le64 sas_address;
 
- out_free_port_info:
-	if (ex) {
-		kfree(ex->phy_info);
-		kfree(ex);
+	port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+	if (!port_info)
+		BUG();
+	port_info->num_phys = (expander_data->NumPhys) ?
+	    expander_data->NumPhys : 1;
+	port_info->phy_info = kcalloc(port_info->num_phys,
+	    sizeof(struct mptsas_phyinfo), GFP_KERNEL);
+	if (!port_info->phy_info)
+		BUG();
+	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	for (i = 0; i < port_info->num_phys; i++) {
+		port_info->phy_info[i].portinfo = port_info;
+		port_info->phy_info[i].handle =
+		    le16_to_cpu(expander_data->DevHandle);
+		port_info->phy_info[i].identify.sas_address =
+		    le64_to_cpu(sas_address);
+		port_info->phy_info[i].identify.handle_parent =
+		    le16_to_cpu(expander_data->ParentDevHandle);
+	}
+
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_add_tail(&port_info->list, &ioc->sas_topology);
+	mutex_unlock(&ioc->sas_topology_mutex);
+
+	printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)sas_address);
+
+	mptsas_expander_refresh(ioc, port_info);
+}
+
+/**
+ * mptsas_delete_expander_siblings - remove siblings attached to expander
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @parent: the parent port_info object
+ * @expander: the expander port_info object
+ **/
+static void
+mptsas_delete_expander_siblings(MPT_ADAPTER *ioc, struct mptsas_portinfo
+    *parent, struct mptsas_portinfo *expander)
+{
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo *port_info;
+	struct sas_rphy *rphy;
+	int i;
+
+	phy_info = expander->phy_info;
+	for (i = 0; i < expander->num_phys; i++, phy_info++) {
+		rphy = mptsas_get_rphy(phy_info);
+		if (!rphy)
+			continue;
+		if (rphy->identify.device_type == SAS_END_DEVICE)
+			mptsas_del_end_device(ioc, phy_info);
+	}
+
+	phy_info = expander->phy_info;
+	for (i = 0; i < expander->num_phys; i++, phy_info++) {
+		rphy = mptsas_get_rphy(phy_info);
+		if (!rphy)
+			continue;
+		if (rphy->identify.device_type ==
+		    MPI_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+		    rphy->identify.device_type ==
+		    MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+			port_info = mptsas_find_portinfo_by_sas_address(ioc,
+			    rphy->identify.sas_address);
+			if (!port_info)
+				continue;
+			if (port_info == parent) /* backlink rphy */
+				continue;
+			/*
+			Delete this expander even if the expdevpage is exists
+			because the parent expander is already deleted
+			*/
+			mptsas_expander_delete(ioc, port_info, 1);
+		}
+	}
+}
+
+
+/**
+ *	mptsas_expander_delete - remove this expander
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@port_info: expander port_info struct
+ *	@force: Flag to forcefully delete the expander
+ *
+ **/
+
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+		struct mptsas_portinfo *port_info, u8 force)
+{
+
+	struct mptsas_portinfo *parent;
+	int		i;
+	u64		expander_sas_address;
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo buffer;
+	struct mptsas_portinfo_details *port_details;
+	struct sas_port *port;
+
+	if (!port_info)
+		return;
+
+	/* see if expander is still there before deleting */
+	mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+	    MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
+	    port_info->phy_info[0].identify.handle);
+
+	if (buffer.num_phys) {
+		kfree(buffer.phy_info);
+		if (!force)
+			return;
+	}
+
+
+	/*
+	 * Obtain the port_info instance to the parent port
+	 */
+	port_details = NULL;
+	expander_sas_address =
+	    port_info->phy_info[0].identify.sas_address;
+	parent = mptsas_find_portinfo_by_handle(ioc,
+	    port_info->phy_info[0].identify.handle_parent);
+	mptsas_delete_expander_siblings(ioc, parent, port_info);
+	if (!parent)
+		goto out;
+
+	/*
+	 * Delete rphys in the parent that point
+	 * to this expander.
+	 */
+	phy_info = parent->phy_info;
+	port = NULL;
+	for (i = 0; i < parent->num_phys; i++, phy_info++) {
+		if (!phy_info->phy)
+			continue;
+		if (phy_info->attached.sas_address !=
+		    expander_sas_address)
+			continue;
+		if (!port) {
+			port = mptsas_get_port(phy_info);
+			port_details = phy_info->port_details;
+		}
+		dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+		    MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", ioc->name,
+		    phy_info->phy_id, phy_info->phy);
+		sas_port_delete_phy(port, phy_info->phy);
+	}
+	if (port) {
+		dev_printk(KERN_DEBUG, &port->dev,
+		    MYIOC_s_FMT "delete port %d, sas_addr (0x%llx)\n",
+		    ioc->name, port->port_identifier,
+		    (unsigned long long)expander_sas_address);
+		sas_port_delete(port);
+		mptsas_port_delete(ioc, port_details);
 	}
  out:
-	return error;
+
+	printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n",  ioc->name, port_info->num_phys,
+	    (unsigned long long)expander_sas_address);
+
+	/*
+	 * free link
+	 */
+	list_del(&port_info->list);
+	kfree(port_info->phy_info);
+	kfree(port_info);
 }
 
-/*
- * mptsas_delete_expander_phys
+
+/**
+ * mptsas_send_expander_event - expanders events
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @expander_data: event data
  *
  *
- * This will traverse topology, and remove expanders
- * that are no longer present
+ * This function handles adding, removing, and refreshing
+ * device handles within the expander objects.
  */
 static void
-mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
+mptsas_send_expander_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_portinfo buffer;
-	struct mptsas_portinfo *port_info, *n, *parent;
-	struct mptsas_phyinfo *phy_info;
-	struct sas_port * port;
+	MPT_ADAPTER *ioc;
+	MpiEventDataSasExpanderStatusChange_t *expander_data;
+	struct mptsas_portinfo *port_info;
+	__le64 sas_address;
 	int i;
-	u64	expander_sas_address;
 
+	ioc = fw_event->ioc;
+	expander_data = (MpiEventDataSasExpanderStatusChange_t *)
+	    fw_event->event_data;
+	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+
+	if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) {
+		if (port_info) {
+			for (i = 0; i < port_info->num_phys; i++) {
+				port_info->phy_info[i].portinfo = port_info;
+				port_info->phy_info[i].handle =
+				    le16_to_cpu(expander_data->DevHandle);
+				port_info->phy_info[i].identify.sas_address =
+				    le64_to_cpu(sas_address);
+				port_info->phy_info[i].identify.handle_parent =
+				    le16_to_cpu(expander_data->ParentDevHandle);
+			}
+			mptsas_expander_refresh(ioc, port_info);
+		} else if (!port_info && expander_data->NumPhys)
+			mptsas_expander_event_add(ioc, expander_data);
+	} else if (expander_data->ReasonCode ==
+	    MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING)
+		mptsas_expander_delete(ioc, port_info, 0);
+
+	mptsas_free_fw_event(ioc, fw_event);
+}
+
+
+/**
+ * mptsas_expander_add -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @handle:
+ *
+ */
+struct mptsas_portinfo *
+mptsas_expander_add(MPT_ADAPTER *ioc, u16 handle)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	int i;
+
+	if ((mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+	    MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)))
+		return NULL;
+
+	port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_ATOMIC);
+	if (!port_info) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+		"%s: exit at line=%d\n", ioc->name,
+		__func__, __LINE__));
+		return NULL;
+	}
+	port_info->num_phys = buffer.num_phys;
+	port_info->phy_info = buffer.phy_info;
+	for (i = 0; i < port_info->num_phys; i++)
+		port_info->phy_info[i].portinfo = port_info;
 	mutex_lock(&ioc->sas_topology_mutex);
-	list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
+	list_add_tail(&port_info->list, &ioc->sas_topology);
+	mutex_unlock(&ioc->sas_topology_mutex);
+	printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)buffer.phy_info[0].identify.sas_address);
+	mptsas_expander_refresh(ioc, port_info);
+	return port_info;
+}
 
-		if (!(port_info->phy_info[0].identify.device_info &
-		    MPI_SAS_DEVICE_INFO_SMP_TARGET))
+static void
+mptsas_send_link_status_event(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc;
+	MpiEventDataSasPhyLinkStatus_t *link_data;
+	struct mptsas_portinfo *port_info;
+	struct mptsas_phyinfo *phy_info = NULL;
+	__le64 sas_address;
+	u8 phy_num;
+	u8 link_rate;
+
+	ioc = fw_event->ioc;
+	link_data = (MpiEventDataSasPhyLinkStatus_t *)fw_event->event_data;
+
+	memcpy(&sas_address, &link_data->SASAddress, sizeof(__le64));
+	sas_address = le64_to_cpu(sas_address);
+	link_rate = link_data->LinkRates >> 4;
+	phy_num = link_data->PhyNum;
+
+	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+	if (port_info) {
+		phy_info = &port_info->phy_info[phy_num];
+		if (phy_info)
+			phy_info->negotiated_link_rate = link_rate;
+	}
+
+	if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
+	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+
+		if (!port_info) {
+			if (ioc->old_sas_discovery_protocal) {
+				port_info = mptsas_expander_add(ioc,
+					le16_to_cpu(link_data->DevHandle));
+				if (port_info)
+					goto out;
+			}
+			goto out;
+		}
+
+		if (port_info == ioc->hba_port_info)
+			mptsas_probe_hba_phys(ioc);
+		else
+			mptsas_expander_refresh(ioc, port_info);
+	} else if (phy_info && phy_info->phy) {
+		if (link_rate ==  MPI_SAS_IOUNIT0_RATE_PHY_DISABLED)
+			phy_info->phy->negotiated_linkrate =
+			    SAS_PHY_DISABLED;
+		else if (link_rate ==
+		    MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION)
+			phy_info->phy->negotiated_linkrate =
+			    SAS_LINK_RATE_FAILED;
+		else
+			phy_info->phy->negotiated_linkrate =
+			    SAS_LINK_RATE_UNKNOWN;
+	}
+ out:
+	mptsas_free_fw_event(ioc, fw_event);
+}
+
+static void
+mptsas_not_responding_devices(MPT_ADAPTER *ioc)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	struct mptsas_device_info	*sas_info;
+	struct mptsas_devinfo sas_device;
+	u32	handle;
+	VirtTarget *vtarget = NULL;
+	struct mptsas_phyinfo *phy_info;
+	u8 found_expander;
+	int retval, retry_count;
+	unsigned long flags;
+
+	mpt_findImVolumes(ioc);
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		   "%s: exiting due to a parallel reset \n", ioc->name,
+		    __func__));
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+	/* devices, logical volumes */
+	mutex_lock(&ioc->sas_device_info_mutex);
+ redo_device_scan:
+	list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) {
+		if (sas_info->is_cached)
 			continue;
+		if (!sas_info->is_logical_volume) {
+			sas_device.handle = 0;
+			retry_count = 0;
+retry_page:
+			retval = mptsas_sas_device_pg0(ioc, &sas_device,
+				(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID
+				<< MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+				(sas_info->fw.channel << 8) +
+				sas_info->fw.id);
+
+			if (sas_device.handle)
+				continue;
+			if (retval == -EBUSY) {
+				spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+				if (ioc->ioc_reset_in_progress) {
+					dfailprintk(ioc,
+					printk(MYIOC_s_DEBUG_FMT
+					"%s: exiting due to reset\n",
+					ioc->name, __func__));
+					spin_unlock_irqrestore
+					(&ioc->taskmgmt_lock, flags);
+					mutex_unlock(&ioc->
+					sas_device_info_mutex);
+					return;
+				}
+				spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+				flags);
+			}
 
-		if (mptsas_sas_expander_pg0(ioc, &buffer,
-		     (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
-		     MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
-		     port_info->phy_info[0].handle)) {
+			if (retval && (retval != -ENODEV)) {
+				if (retry_count < 10) {
+					retry_count++;
+					goto retry_page;
+				} else {
+					devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+					"%s: Config page retry exceeded retry "
+					"count deleting device 0x%llx\n",
+					ioc->name, __func__,
+					sas_info->sas_address));
+				}
+			}
 
-			/*
-			 * Obtain the port_info instance to the parent port
-			 */
-			parent = mptsas_find_portinfo_by_handle(ioc,
-			    port_info->phy_info[0].identify.handle_parent);
+			/* delete device */
+			vtarget = mptsas_find_vtarget(ioc,
+				sas_info->fw.channel, sas_info->fw.id);
 
-			if (!parent)
-				goto next_port;
+			if (vtarget)
+				vtarget->deleted = 1;
 
-			expander_sas_address =
-				port_info->phy_info[0].identify.sas_address;
+			phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+					sas_info->sas_address);
 
-			/*
-			 * Delete rphys in the parent that point
-			 * to this expander.  The transport layer will
-			 * cleanup all the children.
-			 */
-			phy_info = parent->phy_info;
-			for (i = 0; i < parent->num_phys; i++, phy_info++) {
-				port = mptsas_get_port(phy_info);
-				if (!port)
-					continue;
-				if (phy_info->attached.sas_address !=
-					expander_sas_address)
-					continue;
-				dsaswideprintk(ioc,
-				    dev_printk(KERN_DEBUG, &port->dev,
-				    MYIOC_s_FMT "delete port (%d)\n", ioc->name,
-				    port->port_identifier));
-				sas_port_delete(port);
-				mptsas_port_delete(ioc, phy_info->port_details);
+			if (phy_info) {
+				mptsas_del_end_device(ioc, phy_info);
+				goto redo_device_scan;
 			}
- next_port:
+		} else
+			mptsas_volume_delete(ioc, sas_info->fw.id);
+	}
+	mutex_lock(&ioc->sas_device_info_mutex);
 
-			phy_info = port_info->phy_info;
-			for (i = 0; i < port_info->num_phys; i++, phy_info++)
-				mptsas_port_delete(ioc, phy_info->port_details);
+	/* expanders */
+	mutex_lock(&ioc->sas_topology_mutex);
+ redo_expander_scan:
+	list_for_each_entry(port_info, &ioc->sas_topology, list) {
 
-			list_del(&port_info->list);
-			kfree(port_info->phy_info);
-			kfree(port_info);
+		if (port_info->phy_info &&
+		    (!(port_info->phy_info[0].identify.device_info &
+		    MPI_SAS_DEVICE_INFO_SMP_TARGET)))
+			continue;
+		found_expander = 0;
+		handle = 0xFFFF;
+		while (!mptsas_sas_expander_pg0(ioc, &buffer,
+		    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+		     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) &&
+		    !found_expander) {
+
+			handle = buffer.phy_info[0].handle;
+			if (buffer.phy_info[0].identify.sas_address ==
+			    port_info->phy_info[0].identify.sas_address) {
+				found_expander = 1;
+			}
+			kfree(buffer.phy_info);
+		}
+
+		if (!found_expander) {
+			mptsas_expander_delete(ioc, port_info, 0);
+			goto redo_expander_scan;
 		}
-		/*
-		* Free this memory allocated from inside
-		* mptsas_sas_expander_pg0
-		*/
-		kfree(buffer.phy_info);
 	}
-	mutex_unlock(&ioc->sas_topology_mutex);
+	mutex_lock(&ioc->sas_topology_mutex);
+}
+
+/**
+ *	mptsas_probe_expanders - adding expanders
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_probe_expanders(MPT_ADAPTER *ioc)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	u32 			handle;
+	int i;
+
+	handle = 0xFFFF;
+	while (!mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+	     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)) {
+
+		handle = buffer.phy_info[0].handle;
+		port_info = mptsas_find_portinfo_by_sas_address(ioc,
+		    buffer.phy_info[0].identify.sas_address);
+
+		if (port_info) {
+			/* refreshing handles */
+			for (i = 0; i < buffer.num_phys; i++) {
+				port_info->phy_info[i].handle = handle;
+				port_info->phy_info[i].identify.handle_parent =
+				    buffer.phy_info[0].identify.handle_parent;
+			}
+			mptsas_expander_refresh(ioc, port_info);
+			kfree(buffer.phy_info);
+			continue;
+		}
+
+		port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+		if (!port_info) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: exit at line=%d\n", ioc->name,
+			__func__, __LINE__));
+			return;
+		}
+		port_info->num_phys = buffer.num_phys;
+		port_info->phy_info = buffer.phy_info;
+		for (i = 0; i < port_info->num_phys; i++)
+			port_info->phy_info[i].portinfo = port_info;
+		mutex_lock(&ioc->sas_topology_mutex);
+		list_add_tail(&port_info->list, &ioc->sas_topology);
+		mutex_unlock(&ioc->sas_topology_mutex);
+		printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+		    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)buffer.phy_info[0].identify.sas_address);
+		mptsas_expander_refresh(ioc, port_info);
+	}
 }
 
-/*
- * Start of day discovery
- */
+static void
+mptsas_probe_devices(MPT_ADAPTER *ioc)
+{
+	u16 handle;
+	struct mptsas_devinfo sas_device;
+	struct mptsas_phyinfo *phy_info;
+
+	handle = 0xFFFF;
+	while (!(mptsas_sas_device_pg0(ioc, &sas_device,
+	    MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+
+		handle = sas_device.handle;
+
+		if ((sas_device.device_info &
+		     (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+		      MPI_SAS_DEVICE_INFO_STP_TARGET |
+		      MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0)
+			continue;
+
+		phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
+		if (!phy_info)
+			continue;
+
+		if (mptsas_get_rphy(phy_info))
+			continue;
+
+		mptsas_add_end_device(ioc, phy_info);
+	}
+}
+
+/**
+ *	mptsas_scan_sas_topology -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@sas_address:
+ *
+ **/
 static void
 mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
 {
-	u32 handle = 0xFFFF;
+	struct scsi_device *sdev;
 	int i;
 
-	mutex_lock(&ioc->sas_discovery_mutex);
 	mptsas_probe_hba_phys(ioc);
-	while (!mptsas_probe_expander_phys(ioc, &handle))
-		;
+	mptsas_probe_expanders(ioc);
+	mptsas_probe_devices(ioc);
+
 	/*
 	  Reporting RAID volumes.
 	*/
-	if (!ioc->ir_firmware)
-		goto out;
-	if (!ioc->raid_data.pIocPg2)
-		goto out;
-	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
-		goto out;
+	if (!ioc->ir_firmware || !ioc->raid_data.pIocPg2 ||
+	    !ioc->raid_data.pIocPg2->NumActiveVolumes)
+		return;
 	for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
+		if (sdev) {
+			scsi_device_put(sdev);
+			continue;
+		}
+		printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID);
 		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
 		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
 	}
- out:
-	mutex_unlock(&ioc->sas_discovery_mutex);
 }
 
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex UNLOCKED)
- */
+
 static void
-__mptsas_discovery_work(MPT_ADAPTER *ioc)
+mptsas_handle_queue_full_event(struct fw_event_work *fw_event)
 {
-	u32 handle = 0xFFFF;
+	MPT_ADAPTER *ioc;
+	EventDataQueueFull_t *qfull_data;
+	struct mptsas_device_info *sas_info;
+	struct scsi_device	*sdev;
+	int depth;
+	int id = -1;
+	int channel = -1;
+	int fw_id, fw_channel;
+	u16 current_depth;
+
+
+	ioc = fw_event->ioc;
+	qfull_data = (EventDataQueueFull_t *)fw_event->event_data;
+	fw_id = qfull_data->TargetID;
+	fw_channel = qfull_data->Bus;
+	current_depth = le16_to_cpu(qfull_data->CurrentDepth);
+
+	/* if hidden raid component, look for the volume id */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	if (mptscsih_is_phys_disk(ioc, fw_channel, fw_id)) {
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (sas_info->is_cached ||
+			    sas_info->is_logical_volume)
+				continue;
+			if (sas_info->is_hidden_raid_component &&
+			    (sas_info->fw.channel == fw_channel &&
+			    sas_info->fw.id == fw_id)) {
+				id = sas_info->volume_id;
+				channel = MPTSAS_RAID_CHANNEL;
+				goto out;
+			}
+		}
+	} else {
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (sas_info->is_cached ||
+			    sas_info->is_hidden_raid_component ||
+			    sas_info->is_logical_volume)
+				continue;
+			if (sas_info->fw.channel == fw_channel &&
+			    sas_info->fw.id == fw_id) {
+				id = sas_info->os.id;
+				channel = sas_info->os.channel;
+				goto out;
+			}
+		}
 
-	ioc->sas_discovery_runtime=1;
-	mptsas_delete_expander_phys(ioc);
-	mptsas_probe_hba_phys(ioc);
-	while (!mptsas_probe_expander_phys(ioc, &handle))
-		;
-	ioc->sas_discovery_runtime=0;
-}
+	}
 
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex LOCKED)
- */
-static void
-mptsas_discovery_work(struct work_struct *work)
-{
-	struct mptsas_discovery_event *ev =
-		container_of(work, struct mptsas_discovery_event, work);
-	MPT_ADAPTER *ioc = ev->ioc;
+ out:
+	mutex_unlock(&ioc->sas_device_info_mutex);
+
+	if (id != -1) {
+		shost_for_each_device(sdev, ioc->sh) {
+			if (sdev->id == id && sdev->channel == channel) {
+				if (current_depth > sdev->queue_depth) {
+					sdev_printk(KERN_INFO, sdev,
+					    "strange observation, the queue "
+					    "depth is (%d) meanwhile fw queue "
+					    "depth (%d)\n", sdev->queue_depth,
+					    current_depth);
+					continue;
+				}
+				depth = scsi_track_queue_full(sdev,
+				    current_depth - 1);
+				if (depth > 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Queue depth reduced to (%d)\n",
+					   depth);
+				else if (depth < 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Tagged Command Queueing is being "
+					"disabled\n");
+				else if (depth == 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Queue depth not changed yet\n");
+			}
+		}
+	}
 
-	mutex_lock(&ioc->sas_discovery_mutex);
-	__mptsas_discovery_work(ioc);
-	mutex_unlock(&ioc->sas_discovery_mutex);
-	kfree(ev);
+	mptsas_free_fw_event(ioc, fw_event);
 }
 
+
 static struct mptsas_phyinfo *
 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
 {
@@ -2429,69 +3786,80 @@ mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
 	return phy_info;
 }
 
+/**
+ *	mptsas_find_phyinfo_by_phys_disk_num -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phys_disk_num:
+ *	@channel:
+ *	@id:
+ *
+ **/
 static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
+mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 phys_disk_num,
+	u8 channel, u8 id)
 {
-	struct mptsas_portinfo *port_info;
 	struct mptsas_phyinfo *phy_info = NULL;
+	struct mptsas_portinfo *port_info;
+	RaidPhysDiskPage1_t *phys_disk = NULL;
+	int num_paths;
+	u64 sas_address = 0;
 	int i;
 
-	mutex_lock(&ioc->sas_topology_mutex);
-	list_for_each_entry(port_info, &ioc->sas_topology, list) {
-		for (i = 0; i < port_info->num_phys; i++) {
-			if (!mptsas_is_end_device(
-				&port_info->phy_info[i].attached))
-				continue;
-			if (port_info->phy_info[i].attached.id != id)
-				continue;
-			if (port_info->phy_info[i].attached.channel != channel)
-				continue;
-			phy_info = &port_info->phy_info[i];
-			break;
+	phy_info = NULL;
+	if (!ioc->raid_data.pIocPg3)
+		return NULL;
+	/* dual port support */
+	num_paths = mpt_raid_phys_disk_get_num_paths(ioc, phys_disk_num);
+	if (!num_paths)
+		goto out;
+	phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+	   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+	if (!phys_disk)
+		goto out;
+	mpt_raid_phys_disk_pg1(ioc, phys_disk_num, phys_disk);
+	for (i = 0; i < num_paths; i++) {
+		if ((phys_disk->Path[i].Flags & 1) != 0)
+			/* entry no longer valid */
+			continue;
+		if ((id == phys_disk->Path[i].PhysDiskID) &&
+		    (channel == phys_disk->Path[i].PhysDiskBus)) {
+			memcpy(&sas_address, &phys_disk->Path[i].WWID,
+				sizeof(u64));
+			phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+					sas_address);
+			goto out;
 		}
 	}
-	mutex_unlock(&ioc->sas_topology_mutex);
-	return phy_info;
-}
 
-static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
-{
-	struct mptsas_portinfo *port_info;
-	struct mptsas_phyinfo *phy_info = NULL;
-	int i;
+ out:
+	kfree(phys_disk);
+	if (phy_info)
+		return phy_info;
 
+	/*
+	 * Extra code to handle RAID0 case, where the sas_address is not updated
+	 * in phys_disk_page_1 when hotswapped
+	 */
 	mutex_lock(&ioc->sas_topology_mutex);
 	list_for_each_entry(port_info, &ioc->sas_topology, list) {
-		for (i = 0; i < port_info->num_phys; i++) {
+		for (i = 0; i < port_info->num_phys && !phy_info; i++) {
 			if (!mptsas_is_end_device(
 				&port_info->phy_info[i].attached))
 				continue;
 			if (port_info->phy_info[i].attached.phys_disk_num == ~0)
 				continue;
-			if (port_info->phy_info[i].attached.phys_disk_num != id)
-				continue;
-			if (port_info->phy_info[i].attached.channel != channel)
-				continue;
-			phy_info = &port_info->phy_info[i];
-			break;
+			if ((port_info->phy_info[i].attached.phys_disk_num ==
+			    phys_disk_num) &&
+			    (port_info->phy_info[i].attached.id == id) &&
+			    (port_info->phy_info[i].attached.channel ==
+			     channel))
+				phy_info = &port_info->phy_info[i];
 		}
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
 	return phy_info;
 }
 
-/*
- * Work queue thread to clear the persitency table
- */
-static void
-mptsas_persist_clear_table(struct work_struct *work)
-{
-	MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
-
-	mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
 static void
 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
 {
@@ -2517,7 +3885,8 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
 	pRaidVolumePage0_t		buffer = NULL;
 	RaidPhysDiskPage0_t 		phys_disk;
 	int				i;
-	struct mptsas_hotplug_event 	*ev;
+	struct mptsas_phyinfo	*phy_info;
+	struct mptsas_devinfo		sas_device;
 
 	memset(&cfg, 0 , sizeof(CONFIGPARMS));
 	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
@@ -2557,20 +3926,16 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
 		    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
 			continue;
 
-		ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-		if (!ev) {
-			printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
-			goto out;
-		}
+		if (mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			(phys_disk.PhysDiskBus << 8) +
+			phys_disk.PhysDiskID))
+			continue;
 
-		INIT_WORK(&ev->work, mptsas_hotplug_work);
-		ev->ioc = ioc;
-		ev->id = phys_disk.PhysDiskID;
-		ev->channel = phys_disk.PhysDiskBus;
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = phys_disk.PhysDiskNum;
-		ev->event_type = MPTSAS_ADD_DEVICE;
-		schedule_work(&ev->work);
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+		    sas_device.sas_address);
+		mptsas_add_end_device(ioc, phy_info);
 	}
 
  out:
@@ -2582,417 +3947,386 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
  * Work queue thread to handle SAS hotplug events
  */
 static void
-mptsas_hotplug_work(struct work_struct *work)
+mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    struct mptsas_hotplug_event *hot_plug_info)
 {
-	struct mptsas_hotplug_event *ev =
-		container_of(work, struct mptsas_hotplug_event, work);
-
-	MPT_ADAPTER *ioc = ev->ioc;
 	struct mptsas_phyinfo *phy_info;
-	struct sas_rphy *rphy;
-	struct sas_port *port;
-	struct scsi_device *sdev;
 	struct scsi_target * starget;
-	struct sas_identify identify;
-	char *ds = NULL;
 	struct mptsas_devinfo sas_device;
 	VirtTarget *vtarget;
-	VirtDevice *vdevice;
+	int i;
 
-	mutex_lock(&ioc->sas_discovery_mutex);
-	switch (ev->event_type) {
-	case MPTSAS_DEL_DEVICE:
+	switch (hot_plug_info->event_type) {
 
-		phy_info = NULL;
-		if (ev->phys_disk_num_valid) {
-			if (ev->hidden_raid_component){
-				if (mptsas_sas_device_pg0(ioc, &sas_device,
-				    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
-				     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				    (ev->channel << 8) + ev->id)) {
-					dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-						__func__, __LINE__));
-					break;
-				}
-				phy_info = mptsas_find_phyinfo_by_sas_address(
-				    ioc, sas_device.sas_address);
-			}else
-				phy_info = mptsas_find_phyinfo_by_phys_disk_num(
-				    ioc, ev->channel, ev->phys_disk_num);
+	case MPTSAS_ADD_PHYSDISK:
+
+		if (!ioc->raid_data.pIocPg2)
+			break;
+
+		for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+			if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
+			    hot_plug_info->id) {
+				printk(MYIOC_s_WARN_FMT "firmware bug: unable "
+				    "to add hidden disk - target_id matchs "
+				    "volume_id\n", ioc->name);
+				mptsas_free_fw_event(ioc, fw_event);
+				return;
+			}
 		}
+		mpt_findImVolumes(ioc);
 
+	case MPTSAS_ADD_DEVICE:
+		memset(&sas_device, 0, sizeof(struct mptsas_devinfo));
+		mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    (hot_plug_info->channel << 8) +
+		    hot_plug_info->id);
+
+		if (!sas_device.handle)
+			return;
+
+		phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
 		if (!phy_info)
-			phy_info = mptsas_find_phyinfo_by_target(ioc,
-			    ev->channel, ev->id);
+			break;
 
-		/*
-		 * Sanity checks, for non-existing phys and remote rphys.
-		 */
-		if (!phy_info){
+		if (mptsas_get_rphy(phy_info))
+			break;
+
+		mptsas_add_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_DEL_DEVICE:
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+		    hot_plug_info->sas_address);
+		mptsas_del_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_DEL_PHYSDISK:
+
+		mpt_findImVolumes(ioc);
+
+		phy_info = mptsas_find_phyinfo_by_phys_disk_num(
+				ioc, hot_plug_info->phys_disk_num,
+				hot_plug_info->channel,
+				hot_plug_info->id);
+		mptsas_del_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_ADD_PHYSDISK_REPROBE:
+
+		if (mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    (hot_plug_info->channel << 8) + hot_plug_info->id)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-				__func__, __LINE__));
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		if (!phy_info->port_details) {
+
+		phy_info = mptsas_find_phyinfo_by_sas_address(
+		    ioc, sas_device.sas_address);
+
+		if (!phy_info) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		rphy = mptsas_get_rphy(phy_info);
-		if (!rphy) {
+
+		starget = mptsas_get_starget(phy_info);
+		if (!starget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		port = mptsas_get_port(phy_info);
-		if (!port) {
+		vtarget = starget->hostdata;
+		if (!vtarget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		starget = mptsas_get_starget(phy_info);
-		if (starget) {
-			vtarget = starget->hostdata;
+		mpt_findImVolumes(ioc);
 
-			if (!vtarget) {
-				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-					__func__, __LINE__));
-				break;
-			}
+		starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: "
+		    "fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+		    ioc->name, hot_plug_info->channel, hot_plug_info->id,
+		    hot_plug_info->phys_disk_num, (unsigned long long)
+		    sas_device.sas_address);
 
-			/*
-			 * Handling  RAID components
-			 */
-			if (ev->phys_disk_num_valid &&
-			    ev->hidden_raid_component) {
-				printk(MYIOC_s_INFO_FMT
-				    "RAID Hidding: channel=%d, id=%d, "
-				    "physdsk %d \n", ioc->name, ev->channel,
-				    ev->id, ev->phys_disk_num);
-				vtarget->id = ev->phys_disk_num;
-				vtarget->tflags |=
-				    MPT_TARGET_FLAGS_RAID_COMPONENT;
-				mptsas_reprobe_target(starget, 1);
-				phy_info->attached.phys_disk_num =
-				    ev->phys_disk_num;
-			break;
-			}
-		}
-
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SSP_TARGET)
-			ds = "ssp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "stp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "sata";
-
-		printk(MYIOC_s_INFO_FMT
-		       "removing %s device, channel %d, id %d, phy %d\n",
-		       ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
-		dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
-		    "delete port (%d)\n", ioc->name, port->port_identifier);
-		sas_port_delete(port);
-		mptsas_port_delete(ioc, phy_info->port_details);
+		vtarget->id = hot_plug_info->phys_disk_num;
+		vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+		phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num;
+		mptsas_reprobe_target(starget, 1);
 		break;
-	case MPTSAS_ADD_DEVICE:
 
-		if (ev->phys_disk_num_valid)
-			mpt_findImVolumes(ioc);
+	case MPTSAS_DEL_PHYSDISK_REPROBE:
 
-		/*
-		 * Refresh sas device pg0 data
-		 */
 		if (mptsas_sas_device_pg0(ioc, &sas_device,
 		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
 		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-			(ev->channel << 8) + ev->id)) {
+			(hot_plug_info->channel << 8) + hot_plug_info->id)) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-					__func__, __LINE__));
+				    "%s: fw_id=%d exit at line=%d\n",
+				    ioc->name, __func__,
+				    hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		__mptsas_discovery_work(ioc);
-
 		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
 				sas_device.sas_address);
-
-		if (!phy_info || !phy_info->port_details) {
+		if (!phy_info) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
 		starget = mptsas_get_starget(phy_info);
-		if (starget && (!ev->hidden_raid_component)){
-
-			vtarget = starget->hostdata;
-
-			if (!vtarget) {
-				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				    "%s: exit at line=%d\n", ioc->name,
-				    __func__, __LINE__));
-				break;
-			}
-			/*
-			 * Handling  RAID components
-			 */
-			if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
-				printk(MYIOC_s_INFO_FMT
-				    "RAID Exposing: channel=%d, id=%d, "
-				    "physdsk %d \n", ioc->name, ev->channel,
-				    ev->id, ev->phys_disk_num);
-				vtarget->tflags &=
-				    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
-				vtarget->id = ev->id;
-				mptsas_reprobe_target(starget, 0);
-				phy_info->attached.phys_disk_num = ~0;
-			}
+		if (!starget) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		if (mptsas_get_rphy(phy_info)) {
+		vtarget = starget->hostdata;
+		if (!vtarget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			if (ev->channel) printk("%d\n", __LINE__);
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		port = mptsas_get_port(phy_info);
-		if (!port) {
+		if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		memcpy(&phy_info->attached, &sas_device,
-		    sizeof(struct mptsas_devinfo));
-
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SSP_TARGET)
-			ds = "ssp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "stp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "sata";
-
-		printk(MYIOC_s_INFO_FMT
-		       "attaching %s device, channel %d, id %d, phy %d\n",
-		       ioc->name, ds, ev->channel, ev->id, ev->phy_id);
 
-		mptsas_parse_device_info(&identify, &phy_info->attached);
-		rphy = sas_end_device_alloc(port);
-		if (!rphy) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			break; /* non-fatal: an rphy can be added later */
-		}
+		mpt_findImVolumes(ioc);
 
-		rphy->identify = identify;
-		if (sas_rphy_add(rphy)) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			sas_rphy_free(rphy);
-			break;
-		}
-		mptsas_set_rphy(ioc, phy_info, rphy);
+		starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:"
+		    " fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+		    ioc->name, hot_plug_info->channel, hot_plug_info->id,
+		    hot_plug_info->phys_disk_num, (unsigned long long)
+		    sas_device.sas_address);
+
+		vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+		vtarget->id = hot_plug_info->id;
+		phy_info->attached.phys_disk_num = ~0;
+		mptsas_reprobe_target(starget, 0);
+		mptsas_add_device_component_by_fw(ioc,
+		    hot_plug_info->channel, hot_plug_info->id);
 		break;
+
 	case MPTSAS_ADD_RAID:
-		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-		    ev->id, 0);
-		if (sdev) {
-			scsi_device_put(sdev);
-			break;
-		}
-		printk(MYIOC_s_INFO_FMT
-		       "attaching raid volume, channel %d, id %d\n",
-		       ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
+
 		mpt_findImVolumes(ioc);
+		printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id);
+		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id, 0);
 		break;
+
 	case MPTSAS_DEL_RAID:
-		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-		    ev->id, 0);
-		if (!sdev)
-			break;
-		printk(MYIOC_s_INFO_FMT
-		       "removing raid volume, channel %d, id %d\n",
-		       ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-		vdevice = sdev->hostdata;
-		scsi_remove_device(sdev);
-		scsi_device_put(sdev);
+
 		mpt_findImVolumes(ioc);
+		printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id);
+		scsi_remove_device(hot_plug_info->sdev);
+		scsi_device_put(hot_plug_info->sdev);
 		break;
+
 	case MPTSAS_ADD_INACTIVE_VOLUME:
+
+		mpt_findImVolumes(ioc);
 		mptsas_adding_inactive_raid_components(ioc,
-		    ev->channel, ev->id);
+		    hot_plug_info->channel, hot_plug_info->id);
 		break;
-	case MPTSAS_IGNORE_EVENT:
+
 	default:
 		break;
 	}
 
-	mutex_unlock(&ioc->sas_discovery_mutex);
-	kfree(ev);
+	mptsas_free_fw_event(ioc, fw_event);
 }
 
 static void
-mptsas_send_sas_event(MPT_ADAPTER *ioc,
-		EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
+mptsas_send_sas_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-	u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-	__le64 sas_address;
+	MPT_ADAPTER *ioc;
+	struct mptsas_hotplug_event hot_plug_info;
+	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
+	u32 device_info;
+	u64 sas_address;
+
+	ioc = fw_event->ioc;
+	sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)
+	    fw_event->event_data;
+	device_info = le32_to_cpu(sas_event_data->DeviceInfo);
 
 	if ((device_info &
-	     (MPI_SAS_DEVICE_INFO_SSP_TARGET |
-	      MPI_SAS_DEVICE_INFO_STP_TARGET |
-	      MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
+		(MPI_SAS_DEVICE_INFO_SSP_TARGET |
+		MPI_SAS_DEVICE_INFO_STP_TARGET |
+		MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) {
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	if (sas_event_data->ReasonCode ==
+		MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) {
+		mptbase_sas_persist_operation(ioc,
+		MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
 		return;
+	}
 
 	switch (sas_event_data->ReasonCode) {
 	case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-
-		mptsas_target_reset_queue(ioc, sas_event_data);
-		break;
-
 	case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-		ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-		if (!ev) {
-			printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-			break;
-		}
-
-		INIT_WORK(&ev->work, mptsas_hotplug_work);
-		ev->ioc = ioc;
-		ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-		ev->parent_handle =
-		    le16_to_cpu(sas_event_data->ParentDevHandle);
-		ev->channel = sas_event_data->Bus;
-		ev->id = sas_event_data->TargetID;
-		ev->phy_id = sas_event_data->PhyNum;
+		memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+		hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle);
+		hot_plug_info.channel = sas_event_data->Bus;
+		hot_plug_info.id = sas_event_data->TargetID;
+		hot_plug_info.phy_id = sas_event_data->PhyNum;
 		memcpy(&sas_address, &sas_event_data->SASAddress,
-		    sizeof(__le64));
-		ev->sas_address = le64_to_cpu(sas_address);
-		ev->device_info = device_info;
-
+		    sizeof(u64));
+		hot_plug_info.sas_address = le64_to_cpu(sas_address);
+		hot_plug_info.device_info = device_info;
 		if (sas_event_data->ReasonCode &
 		    MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
-			ev->event_type = MPTSAS_ADD_DEVICE;
+			hot_plug_info.event_type = MPTSAS_ADD_DEVICE;
 		else
-			ev->event_type = MPTSAS_DEL_DEVICE;
-		schedule_work(&ev->work);
+			hot_plug_info.event_type = MPTSAS_DEL_DEVICE;
+		mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
 		break;
+
 	case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-	/*
-	 * Persistent table is full.
-	 */
-		INIT_WORK(&ioc->sas_persist_task,
-		    mptsas_persist_clear_table);
-		schedule_work(&ioc->sas_persist_task);
+		mptbase_sas_persist_operation(ioc,
+		    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
 		break;
-	/*
-	 * TODO, handle other events
-	 */
+
 	case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-	case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+	/* TODO */
 	case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
-	case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+	/* TODO */
 	default:
+		mptsas_free_fw_event(ioc, fw_event);
 		break;
 	}
 }
+
 static void
-mptsas_send_raid_event(MPT_ADAPTER *ioc,
-		EVENT_DATA_RAID *raid_event_data)
+mptsas_send_raid_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-	int status = le32_to_cpu(raid_event_data->SettingsStatus);
-	int state = (status >> 8) & 0xff;
-
-	if (ioc->bus_type != SAS)
-		return;
-
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev) {
-		printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-		return;
+	MPT_ADAPTER *ioc;
+	EVENT_DATA_RAID *raid_event_data;
+	struct mptsas_hotplug_event hot_plug_info;
+	int status;
+	int state;
+	struct scsi_device *sdev = NULL;
+	VirtDevice *vdevice = NULL;
+	RaidPhysDiskPage0_t phys_disk;
+
+	ioc = fw_event->ioc;
+	raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data;
+	status = le32_to_cpu(raid_event_data->SettingsStatus);
+	state = (status >> 8) & 0xff;
+
+	memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+	hot_plug_info.id = raid_event_data->VolumeID;
+	hot_plug_info.channel = raid_event_data->VolumeBus;
+	hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum;
+
+	if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED ||
+	    raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED ||
+	    raid_event_data->ReasonCode ==
+	    MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) {
+		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info.id, 0);
+		hot_plug_info.sdev = sdev;
+		if (sdev)
+			vdevice = sdev->hostdata;
 	}
 
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->id = raid_event_data->VolumeID;
-	ev->channel = raid_event_data->VolumeBus;
-	ev->event_type = MPTSAS_IGNORE_EVENT;
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+	    "ReasonCode=%02x\n", ioc->name, __func__,
+	    raid_event_data->ReasonCode));
 
 	switch (raid_event_data->ReasonCode) {
 	case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = raid_event_data->PhysDiskNum;
-		ev->event_type = MPTSAS_ADD_DEVICE;
+		hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE;
 		break;
 	case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = raid_event_data->PhysDiskNum;
-		ev->hidden_raid_component = 1;
-		ev->event_type = MPTSAS_DEL_DEVICE;
+		hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE;
 		break;
 	case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
 		switch (state) {
 		case MPI_PD_STATE_ONLINE:
 		case MPI_PD_STATE_NOT_COMPATIBLE:
-			ev->phys_disk_num_valid = 1;
-			ev->phys_disk_num = raid_event_data->PhysDiskNum;
-			ev->hidden_raid_component = 1;
-			ev->event_type = MPTSAS_ADD_DEVICE;
+			mpt_raid_phys_disk_pg0(ioc,
+			    raid_event_data->PhysDiskNum, &phys_disk);
+			hot_plug_info.id = phys_disk.PhysDiskID;
+			hot_plug_info.channel = phys_disk.PhysDiskBus;
+			hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
 			break;
+		case MPI_PD_STATE_FAILED:
 		case MPI_PD_STATE_MISSING:
 		case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
 		case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
 		case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
-			ev->phys_disk_num_valid = 1;
-			ev->phys_disk_num = raid_event_data->PhysDiskNum;
-			ev->event_type = MPTSAS_DEL_DEVICE;
+			hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
 			break;
 		default:
 			break;
 		}
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_DELETED:
-		ev->event_type = MPTSAS_DEL_RAID;
+		if (!sdev)
+			break;
+		vdevice->vtarget->deleted = 1; /* block IO */
+		hot_plug_info.event_type = MPTSAS_DEL_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_CREATED:
-		ev->event_type = MPTSAS_ADD_RAID;
+		if (sdev) {
+			scsi_device_put(sdev);
+			break;
+		}
+		hot_plug_info.event_type = MPTSAS_ADD_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+		if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) {
+			if (!sdev)
+				break;
+			vdevice->vtarget->deleted = 1; /* block IO */
+			hot_plug_info.event_type = MPTSAS_DEL_RAID;
+			break;
+		}
 		switch (state) {
 		case MPI_RAIDVOL0_STATUS_STATE_FAILED:
 		case MPI_RAIDVOL0_STATUS_STATE_MISSING:
-			ev->event_type = MPTSAS_DEL_RAID;
+			if (!sdev)
+				break;
+			vdevice->vtarget->deleted = 1; /* block IO */
+			hot_plug_info.event_type = MPTSAS_DEL_RAID;
 			break;
 		case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
 		case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
-			ev->event_type = MPTSAS_ADD_RAID;
+			if (sdev) {
+				scsi_device_put(sdev);
+				break;
+			}
+			hot_plug_info.event_type = MPTSAS_ADD_RAID;
 			break;
 		default:
 			break;
@@ -3001,32 +4335,188 @@ mptsas_send_raid_event(MPT_ADAPTER *ioc,
 	default:
 		break;
 	}
-	schedule_work(&ev->work);
+
+	if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT)
+		mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+	else
+		mptsas_free_fw_event(ioc, fw_event);
 }
 
-static void
-mptsas_send_discovery_event(MPT_ADAPTER *ioc,
-	EVENT_DATA_SAS_DISCOVERY *discovery_data)
+/**
+ *	mptsas_issue_tm - send mptsas internal tm request
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@type: Task Management type
+ *	@channel: channel number for task management
+ *	@id: Logical Target ID for reset (if appropriate)
+ *	@lun: Logical unit for reset (if appropriate)
+ *	@task_context: Context for the task to be aborted
+ *	@timeout: timeout for task management control
+ *
+ *	return 0 on success and -1 on failure:
+ *
+ */
+static int
+mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
+	int task_context, ulong timeout, u8 *issue_reset)
 {
-	struct mptsas_discovery_event *ev;
+	MPT_FRAME_HDR	*mf;
+	SCSITaskMgmt_t	*pScsiTm;
+	int		 retval;
+	unsigned long	 timeleft;
+
+	*issue_reset = 0;
+	mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+	if (mf == NULL) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no "
+		    "msg frames!!\n", ioc->name));
+		goto out;
+	}
 
-	/*
-	 * DiscoveryStatus
-	 *
-	 * This flag will be non-zero when firmware
-	 * kicks off discovery, and return to zero
-	 * once its completed.
-	 */
-	if (discovery_data->DiscoveryStatus)
-		return;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, "
+	    "task_type = 0x%02X,\n\t timeout = %ld, fw_channel = %d, "
+	    "fw_id = %d, lun = %lld,\n\t task_context = 0x%x\n", ioc->name, mf,
+	     type, timeout, channel, id, (unsigned long long)lun,
+	     task_context));
+
+	pScsiTm = (SCSITaskMgmt_t *) mf;
+	memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
+	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
+	pScsiTm->TaskType = type;
+	pScsiTm->MsgFlags = 0;
+	pScsiTm->TargetID = id;
+	pScsiTm->Bus = channel;
+	pScsiTm->ChainOffset = 0;
+	pScsiTm->Reserved = 0;
+	pScsiTm->Reserved1 = 0;
+	pScsiTm->TaskMsgContext = task_context;
+	int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
+
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	retval = 0;
+	mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
+
+	/* Now wait for the command to complete */
+	timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+		    "TaskMgmt request: TIMED OUT!(mr=%p)\n", ioc->name, mf));
+		mpt_free_msg_frame(ioc, mf);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		*issue_reset = 1;
+		goto out;
+	}
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt request: failed with no reply\n", ioc->name));
+		goto out;
+	}
+
+ out:
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	return retval;
+}
+
+/**
+ *	mptsas_broadcast_primative_work - Handle broadcast primitives
+ *	@work: work queue payload containing info describing the event
+ *
+ *	this will be handled in workqueue context.
+ */
+static void
+mptsas_broadcast_primative_work(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc = fw_event->ioc;
+	MPT_FRAME_HDR	*mf;
+	VirtDevice	*vdevice;
+	int			ii;
+	struct scsi_cmnd	*sc;
+	SCSITaskMgmtReply_t	*pScsiTmReply;
+	u8			issue_reset;
+	int			task_context;
+	u8			channel, id;
+	int			 lun;
+	u32			 termination_count;
+	u32			 query_count;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s - enter\n", ioc->name, __func__));
+
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+		mptsas_requeue_fw_event(ioc, fw_event, 1000);
 		return;
-	INIT_WORK(&ev->work, mptsas_discovery_work);
-	ev->ioc = ioc;
-	schedule_work(&ev->work);
-};
+	}
+
+	issue_reset = 0;
+	termination_count = 0;
+	query_count = 0;
+	mpt_findImVolumes(ioc);
+	pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+
+	for (ii = 0; ii < ioc->req_depth; ii++) {
+		if (ioc->fw_events_off)
+			goto out;
+		sc = mptscsih_get_scsi_lookup(ioc, ii);
+		if (!sc)
+			continue;
+		mf = MPT_INDEX_2_MFPTR(ioc, ii);
+		if (!mf)
+			continue;
+		task_context = mf->u.frame.hwhdr.msgctxu.MsgContext;
+		vdevice = sc->device->hostdata;
+		if (!vdevice || !vdevice->vtarget)
+			continue;
+		if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+			continue; /* skip hidden raid components */
+		if (vdevice->vtarget->raidVolume)
+			continue; /* skip hidden raid components */
+		channel = vdevice->vtarget->channel;
+		id = vdevice->vtarget->id;
+		lun = vdevice->lun;
+		if (mptsas_issue_tm(ioc, MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK,
+		    channel, id, (u64)lun, task_context, 30, &issue_reset))
+			goto out;
+		query_count++;
+		termination_count +=
+		    le32_to_cpu(pScsiTmReply->TerminationCount);
+		if ((pScsiTmReply->IOCStatus == MPI_IOCSTATUS_SUCCESS) &&
+		    (pScsiTmReply->ResponseCode ==
+		    MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+		    pScsiTmReply->ResponseCode ==
+		    MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+			continue;
+		if (mptsas_issue_tm(ioc,
+		    MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET,
+		    channel, id, (u64)lun, 0, 30, &issue_reset))
+			goto out;
+		termination_count +=
+		    le32_to_cpu(pScsiTmReply->TerminationCount);
+	}
+
+ out:
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s - exit, query_count = %d termination_count = %d\n",
+	    ioc->name, __func__, query_count, termination_count));
+
+	ioc->broadcast_aen_busy = 0;
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+	if (issue_reset) {
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+		    ioc->name, __func__);
+		mpt_HardResetHandler(ioc, CAN_SLEEP);
+	}
+	mptsas_free_fw_event(ioc, fw_event);
+}
 
 /*
  * mptsas_send_ir2_event - handle exposing hidden disk when
@@ -3037,76 +4527,159 @@ mptsas_send_discovery_event(MPT_ADAPTER *ioc,
  *
  */
 static void
-mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
+mptsas_send_ir2_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-
-	if (ir2_data->ReasonCode !=
-	    MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
-		return;
-
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
+	MPT_ADAPTER	*ioc;
+	struct mptsas_hotplug_event hot_plug_info;
+	MPI_EVENT_DATA_IR2	*ir2_data;
+	u8 reasonCode;
+	RaidPhysDiskPage0_t phys_disk;
+
+	ioc = fw_event->ioc;
+	ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data;
+	reasonCode = ir2_data->ReasonCode;
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+	    "ReasonCode=%02x\n", ioc->name, __func__, reasonCode));
+
+	memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+	hot_plug_info.id = ir2_data->TargetID;
+	hot_plug_info.channel = ir2_data->Bus;
+	switch (reasonCode) {
+	case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+		hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME;
+		break;
+	case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+		hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+		hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
+		break;
+	case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+		hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+		mpt_raid_phys_disk_pg0(ioc,
+		    ir2_data->PhysDiskNum, &phys_disk);
+		hot_plug_info.id = phys_disk.PhysDiskID;
+		hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
+		break;
+	default:
+		mptsas_free_fw_event(ioc, fw_event);
 		return;
-
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->id = ir2_data->TargetID;
-	ev->channel = ir2_data->Bus;
-	ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
-
-	schedule_work(&ev->work);
-};
+	}
+	mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+}
 
 static int
 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 {
-	int rc=1;
-	u8 event = le32_to_cpu(reply->Event) & 0xFF;
+	u32 event = le32_to_cpu(reply->Event);
+	int sz, event_data_sz;
+	struct fw_event_work *fw_event;
+	unsigned long delay;
 
-	if (!ioc->sh)
-		goto out;
-
-	/*
-	 * sas_discovery_ignore_events
-	 *
-	 * This flag is to prevent anymore processing of
-	 * sas events once mptsas_remove function is called.
-	 */
-	if (ioc->sas_discovery_ignore_events) {
-		rc = mptscsih_event_process(ioc, reply);
-		goto out;
-	}
+	/* events turned off due to host reset or driver unloading */
+	if (ioc->fw_events_off)
+		return 0;
 
+	delay = msecs_to_jiffies(1);
 	switch (event) {
+	case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+	{
+		EVENT_DATA_SAS_BROADCAST_PRIMITIVE *broadcast_event_data =
+		    (EVENT_DATA_SAS_BROADCAST_PRIMITIVE *)reply->Data;
+		if (broadcast_event_data->Primitive !=
+		    MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+			return 0;
+		if (ioc->broadcast_aen_busy)
+			return 0;
+		ioc->broadcast_aen_busy = 1;
+		break;
+	}
 	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
-		mptsas_send_sas_event(ioc,
-			(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
+	{
+		EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data =
+		    (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data;
+
+		if (sas_event_data->ReasonCode ==
+		    MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) {
+			mptsas_target_reset_queue(ioc, sas_event_data);
+			return 0;
+		}
 		break;
-	case MPI_EVENT_INTEGRATED_RAID:
-		mptsas_send_raid_event(ioc,
-			(EVENT_DATA_RAID *)reply->Data);
+	}
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+	{
+		MpiEventDataSasExpanderStatusChange_t *expander_data =
+		    (MpiEventDataSasExpanderStatusChange_t *)reply->Data;
+
+		if (ioc->old_sas_discovery_protocal)
+			return 0;
+
+		if (expander_data->ReasonCode ==
+		    MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING &&
+		    ioc->device_missing_delay)
+			delay = HZ * ioc->device_missing_delay;
 		break;
+	}
+	case MPI_EVENT_SAS_DISCOVERY:
+	{
+		u32 discovery_status;
+		EventDataSasDiscovery_t *discovery_data =
+		    (EventDataSasDiscovery_t *)reply->Data;
+
+		discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus);
+		ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0;
+		if (ioc->old_sas_discovery_protocal && !discovery_status)
+			mptsas_queue_rescan(ioc);
+		return 0;
+	}
+	case MPI_EVENT_INTEGRATED_RAID:
 	case MPI_EVENT_PERSISTENT_TABLE_FULL:
-		INIT_WORK(&ioc->sas_persist_task,
-		    mptsas_persist_clear_table);
-		schedule_work(&ioc->sas_persist_task);
-		break;
-	 case MPI_EVENT_SAS_DISCOVERY:
-		mptsas_send_discovery_event(ioc,
-			(EVENT_DATA_SAS_DISCOVERY *)reply->Data);
-		break;
 	case MPI_EVENT_IR2:
-		mptsas_send_ir2_event(ioc,
-		    (PTR_MPI_EVENT_DATA_IR2)reply->Data);
+	case MPI_EVENT_SAS_PHY_LINK_STATUS:
+	case MPI_EVENT_QUEUE_FULL:
 		break;
 	default:
-		rc = mptscsih_event_process(ioc, reply);
-		break;
+		return 0;
 	}
- out:
 
-	return rc;
+	event_data_sz = ((reply->MsgLength * 4) -
+	    offsetof(EventNotificationReply_t, Data));
+	sz = offsetof(struct fw_event_work, event_data) + event_data_sz;
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name,
+		 __func__, __LINE__);
+		return 0;
+	}
+	memcpy(fw_event->event_data, reply->Data, event_data_sz);
+	fw_event->event = event;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, delay);
+	return 0;
+}
+
+/* Delete a volume when no longer listed in ioc pg2
+ */
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id)
+{
+	struct scsi_device *sdev;
+	int i;
+
+	sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, id, 0);
+	if (!sdev)
+		return;
+	if (!ioc->raid_data.pIocPg2)
+		goto out;
+	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
+		goto out;
+	for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
+		if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id)
+			goto release_sdev;
+ out:
+	printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+	    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, id);
+	scsi_remove_device(sdev);
+ release_sdev:
+	scsi_device_put(sdev);
 }
 
 static int
@@ -3128,6 +4701,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return r;
 
 	ioc = pci_get_drvdata(pdev);
+	mptsas_fw_event_off(ioc);
 	ioc->DoneCtx = mptsasDoneCtx;
 	ioc->TaskCtx = mptsasTaskCtx;
 	ioc->InternalCtx = mptsasInternalCtx;
@@ -3211,17 +4785,15 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -3251,9 +4823,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -3273,10 +4842,11 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ioc->sas_data.ptClear = mpt_pt_clear;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 	INIT_LIST_HEAD(&hd->target_reset_list);
+	INIT_LIST_HEAD(&ioc->sas_device_info_list);
+	mutex_init(&ioc->sas_device_info_mutex);
+
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
 	if (ioc->sas_data.ptClear==1) {
@@ -3291,8 +4861,11 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_mptsas_probe;
 	}
 
+	/* older firmware doesn't support expander events */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xE)
+		ioc->old_sas_discovery_protocal = 1;
 	mptsas_scan_sas_topology(ioc);
-
+	mptsas_fw_event_on(ioc);
 	return 0;
 
  out_mptsas_probe:
@@ -3301,12 +4874,25 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+void
+mptsas_shutdown(struct pci_dev *pdev)
+{
+	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+	mptsas_fw_event_off(ioc);
+	mptsas_cleanup_fw_event_q(ioc);
+}
+
 static void __devexit mptsas_remove(struct pci_dev *pdev)
 {
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	struct mptsas_portinfo *p, *n;
 	int i;
 
+	mptsas_shutdown(pdev);
+
+	mptsas_del_device_components(ioc);
+
 	ioc->sas_discovery_ignore_events = 1;
 	sas_remove_host(ioc->sh);
 
@@ -3315,11 +4901,12 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
 		list_del(&p->list);
 		for (i = 0 ; i < p->num_phys ; i++)
 			mptsas_port_delete(ioc, p->phy_info[i].port_details);
+
 		kfree(p->phy_info);
 		kfree(p);
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
-
+	ioc->hba_port_info = NULL;
 	mptscsih_remove(pdev);
 }
 
@@ -3344,7 +4931,7 @@ static struct pci_driver mptsas_driver = {
 	.id_table	= mptsas_pci_table,
 	.probe		= mptsas_probe,
 	.remove		= __devexit_p(mptsas_remove),
-	.shutdown	= mptscsih_shutdown,
+	.shutdown	= mptsas_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
@@ -3364,10 +4951,12 @@ mptsas_init(void)
 		return -ENODEV;
 
 	mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
-	mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
+	mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
 	mptsasInternalCtx =
 		mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
 	mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
+	mptsasDeviceResetCtx =
+		mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
 
 	mpt_event_register(mptsasDoneCtx, mptsas_event_process);
 	mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset);
@@ -3392,6 +4981,7 @@ mptsas_exit(void)
 	mpt_deregister(mptsasInternalCtx);
 	mpt_deregister(mptsasTaskCtx);
 	mpt_deregister(mptsasDoneCtx);
+	mpt_deregister(mptsasDeviceResetCtx);
 }
 
 module_init(mptsas_init);
diff --git a/drivers/message/fusion/mptsas.h b/drivers/message/fusion/mptsas.h
index 2b544e0877e..953c2bfcf6a 100644
--- a/drivers/message/fusion/mptsas.h
+++ b/drivers/message/fusion/mptsas.h
@@ -53,6 +53,7 @@ struct mptsas_target_reset_event {
 	struct list_head 	list;
 	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data;
 	u8	target_reset_issued;
+	unsigned long	 time_count;
 };
 
 enum mptsas_hotplug_action {
@@ -60,12 +61,37 @@ enum mptsas_hotplug_action {
 	MPTSAS_DEL_DEVICE,
 	MPTSAS_ADD_RAID,
 	MPTSAS_DEL_RAID,
+	MPTSAS_ADD_PHYSDISK,
+	MPTSAS_ADD_PHYSDISK_REPROBE,
+	MPTSAS_DEL_PHYSDISK,
+	MPTSAS_DEL_PHYSDISK_REPROBE,
 	MPTSAS_ADD_INACTIVE_VOLUME,
 	MPTSAS_IGNORE_EVENT,
 };
 
+struct mptsas_mapping{
+	u8			id;
+	u8			channel;
+};
+
+struct mptsas_device_info {
+	struct list_head 	list;
+	struct mptsas_mapping	os;	/* operating system mapping*/
+	struct mptsas_mapping	fw;	/* firmware mapping */
+	u64			sas_address;
+	u32			device_info; /* specific bits for devices */
+	u16			slot;		/* enclosure slot id */
+	u64			enclosure_logical_id; /*enclosure address */
+	u8			is_logical_volume; /* is this logical volume */
+	/* this belongs to volume */
+	u8			is_hidden_raid_component;
+	/* this valid when is_hidden_raid_component set */
+	u8			volume_id;
+	/* cached data for a removed device */
+	u8			is_cached;
+};
+
 struct mptsas_hotplug_event {
-	struct work_struct	work;
 	MPT_ADAPTER		*ioc;
 	enum mptsas_hotplug_action event_type;
 	u64			sas_address;
@@ -73,11 +99,18 @@ struct mptsas_hotplug_event {
 	u8			id;
 	u32			device_info;
 	u16			handle;
-	u16			parent_handle;
 	u8			phy_id;
-	u8			phys_disk_num_valid;	/* hrc (hidden raid component) */
 	u8			phys_disk_num;		/* hrc - unique index*/
-	u8			hidden_raid_component;	/* hrc - don't expose*/
+	struct scsi_device	*sdev;
+};
+
+struct fw_event_work {
+	struct list_head 	list;
+	struct delayed_work	 work;
+	MPT_ADAPTER	*ioc;
+	u32			event;
+	u8			retries;
+	u8			event_data[1];
 };
 
 struct mptsas_discovery_event {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index e62c6bc4ad3..8440f78f696 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -80,7 +80,7 @@ MODULE_VERSION(my_VERSION);
 /*
  *  Other private/forward protos...
  */
-static struct scsi_cmnd * mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
 static void	mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
 static int	SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
@@ -92,18 +92,24 @@ static int	mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
 				 SCSIIORequest_t *pReq, int req_idx);
 static void	mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
 static void	mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
-static int	mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
-static int	mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
 
-static int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
+int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
+		int lun, int ctx2abort, ulong timeout);
 
 int		mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 int		mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
 
+void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+static int	mptscsih_get_completion_code(MPT_ADAPTER *ioc,
+		MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
 int		mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
 static int	mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
 static void	mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
 
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+				SCSITaskMgmtReply_t *pScsiTmReply);
 void 		mptscsih_remove(struct pci_dev *);
 void 		mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
@@ -113,69 +119,6 @@ int 		mptscsih_resume(struct pci_dev *pdev);
 
 #define SNS_LEN(scp)	SCSI_SENSE_BUFFERSIZE
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_sge - Place a simple SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@flagslength: SGE flags and data transfer length
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
-
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_sge() */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_chain - Place a chain SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@next: nextChainOffset value (u32's)
- *	@length: length of next SGL segment
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-
-		pChain->NextChainOffset = next;
-
-		pChain->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pChain->Address.High = cpu_to_le32(tmp);
-	} else {
-		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-		pChain->NextChainOffset = next;
-		pChain->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_chain() */
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -281,10 +224,10 @@ mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
 	 */
 
 nextSGEset:
-	numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
+	numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
 	numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
 
-	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
+	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
 
 	/* Get first (num - 1) SG elements
 	 * Skip any SG entries with a length of 0
@@ -293,17 +236,19 @@ nextSGEset:
 	for (ii=0; ii < (numSgeThisFrame-1); ii++) {
 		thisxfer = sg_dma_len(sg);
 		if (thisxfer == 0) {
-			sg = sg_next(sg); /* Get next SG element from the OS */
+			/* Get next SG element from the OS */
+			sg = sg_next(sg);
 			sg_done++;
 			continue;
 		}
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
 
-		sg = sg_next(sg);	/* Get next SG element from the OS */
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		/* Get next SG element from the OS */
+		sg = sg_next(sg);
+		psge += ioc->SGE_size;
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 	}
 
@@ -320,12 +265,8 @@ nextSGEset:
 		thisxfer = sg_dma_len(sg);
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
-		/*
-		sg = sg_next(sg);
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		*/
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 
 		if (chainSge) {
@@ -334,7 +275,8 @@ nextSGEset:
 			 * Update the chain element
 			 * Offset and Length fields.
 			 */
-			mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			ioc->add_chain((char *)chainSge, 0, sgeOffset,
+				ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The current buffer is the original MF
 			 * and there is no Chain buffer.
@@ -367,7 +309,7 @@ nextSGEset:
 		 * set properly).
 		 */
 		if (sg_done) {
-			u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
+			u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
 			sgflags = le32_to_cpu(*ptmp);
 			sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
 			*ptmp = cpu_to_le32(sgflags);
@@ -381,8 +323,9 @@ nextSGEset:
 			 * Old chain element is now complete.
 			 */
 			u8 nextChain = (u8) (sgeOffset >> 2);
-			sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
-			mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			sgeOffset += ioc->SGE_size;
+			ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
+					 ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The original MF buffer requires a chain buffer -
 			 * set the offset.
@@ -592,14 +535,15 @@ mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pSc
 	}
 
 	scsi_print_command(sc);
-	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d\n",
-	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID);
+	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %d\n",
+	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
 	printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
 	    "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
 	    scsi_get_resid(sc));
 	printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
 	    "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
 	    le32_to_cpu(pScsiReply->TransferCount), sc->result);
+
 	printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
 	    "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
 	    ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
@@ -654,16 +598,14 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
 	req_idx_MR = (mr != NULL) ?
 	    le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+
+	/* Special case, where already freed message frame is received from
+	 * Firmware. It happens with Resetting IOC.
+	 * Return immediately. Do not care
+	 */
 	if ((req_idx != req_idx_MR) ||
-	    (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
-		printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
-		    ioc->name);
-		printk (MYIOC_s_ERR_FMT
-		    "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
-		    ioc->name, req_idx, req_idx_MR, mf, mr,
-		    mptscsih_get_scsi_lookup(ioc, req_idx_MR));
+	    (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
 		return 0;
-	}
 
 	sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
 	if (sc == NULL) {
@@ -810,12 +752,16 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 			 */
 
 		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
-		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
 			/* Linux handles an unsolicited DID_RESET better
 			 * than an unsolicited DID_ABORT.
 			 */
 			sc->result = DID_RESET << 16;
 
+		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
+			if (ioc->bus_type == FC)
+				sc->result = DID_ERROR << 16;
+			else
+				sc->result = DID_RESET << 16;
 			break;
 
 		case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:	/* 0x0049 */
@@ -992,9 +938,9 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
 		scsi_dma_unmap(sc);
 		sc->result = DID_RESET << 16;
 		sc->host_scribble = NULL;
-		sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
-		    "completing cmds: fw_channel %d, fw_id %d, sc=%p,"
-		    " mf = %p, idx=%x\n", ioc->name, channel, id, sc, mf, ii);
+		dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
+		    "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
+		    "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
 		sc->scsi_done(sc);
 	}
 }
@@ -1053,9 +999,11 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
 			scsi_dma_unmap(sc);
 			sc->host_scribble = NULL;
 			sc->result = DID_NO_CONNECT << 16;
-			sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT "completing cmds: fw_channel %d,"
-			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, vdevice->vtarget->channel,
-			   vdevice->vtarget->id, sc, mf, ii);
+			dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
+			   MYIOC_s_FMT "completing cmds: fw_channel %d, "
+			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
+			   vdevice->vtarget->channel, vdevice->vtarget->id,
+			   sc, mf, ii));
 			sc->scsi_done(sc);
 			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 		}
@@ -1346,7 +1294,6 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	MPT_FRAME_HDR		*mf;
 	SCSIIORequest_t		*pScsiReq;
 	VirtDevice		*vdevice = SCpnt->device->hostdata;
-	int	 lun;
 	u32	 datalen;
 	u32	 scsictl;
 	u32	 scsidir;
@@ -1357,13 +1304,12 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 
 	hd = shost_priv(SCpnt->device->host);
 	ioc = hd->ioc;
-	lun = SCpnt->device->lun;
 	SCpnt->scsi_done = done;
 
 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
 		ioc->name, SCpnt, done));
 
-	if (hd->resetPending) {
+	if (ioc->taskmgmt_quiesce_io) {
 		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
 			ioc->name, SCpnt));
 		return SCSI_MLQUEUE_HOST_BUSY;
@@ -1422,7 +1368,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	pScsiReq->CDBLength = SCpnt->cmd_len;
 	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
 	pScsiReq->Reserved = 0;
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
 	pScsiReq->Control = cpu_to_le32(scsictl);
 
@@ -1448,7 +1394,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	 */
 	if (datalen == 0) {
 		/* Add a NULL SGE */
-		mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
+		ioc->add_sge((char *)&pScsiReq->SGL,
+			MPT_SGE_FLAGS_SSIMPLE_READ | 0,
 			(dma_addr_t) -1);
 	} else {
 		/* Add a 32 or 64 bit SGE */
@@ -1528,8 +1475,8 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptscsih_TMHandler - Generic handler for SCSI Task Management.
- *	@hd: Pointer to MPT SCSI HOST structure
+ *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
+ *	@hd: Pointer to MPT_SCSI_HOST structure
  *	@type: Task Management type
  *	@channel: channel number for task management
  *	@id: Logical Target ID for reset (if appropriate)
@@ -1537,145 +1484,68 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
  *	@ctx2abort: Context for the task to be aborted (if appropriate)
  *	@timeout: timeout for task management control
  *
- *	Fall through to mpt_HardResetHandler if: not operational, too many
- *	failed TM requests or handshake failure.
+ *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
+ *	or a non-interrupt thread.  In the former, must not call schedule().
  *
- *	Remark: Currently invoked from a non-interrupt thread (_bh).
+ *	Not all fields are meaningfull for all task types.
  *
- *	Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC
- *	will be active.
+ *	Returns 0 for SUCCESS, or FAILED.
  *
- *	Returns 0 for SUCCESS, or %FAILED.
  **/
 int
-mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
+mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
+	int ctx2abort, ulong timeout)
 {
-	MPT_ADAPTER	*ioc;
-	int		 rc = -1;
+	MPT_FRAME_HDR	*mf;
+	SCSITaskMgmt_t	*pScsiTm;
+	int		 ii;
+	int		 retval;
+	MPT_ADAPTER 	*ioc = hd->ioc;
+	unsigned long	 timeleft;
+	u8		 issue_hard_reset;
 	u32		 ioc_raw_state;
-	unsigned long	 flags;
-
-	ioc = hd->ioc;
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler Entered!\n", ioc->name));
-
-	// SJR - CHECKME - Can we avoid this here?
-	// (mpt_HardResetHandler has this check...)
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
-		spin_unlock_irqrestore(&ioc->diagLock, flags);
-		return FAILED;
-	}
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
-
-	/*  Wait a fixed amount of time for the TM pending flag to be cleared.
-	 *  If we time out and not bus reset, then we return a FAILED status
-	 *  to the caller.
-	 *  The call to mptscsih_tm_pending_wait() will set the pending flag
-	 *  if we are
-	 *  successful. Otherwise, reload the FW.
-	 */
-	if (mptscsih_tm_pending_wait(hd) == FAILED) {
-		if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler abort: "
-			   "Timed out waiting for last TM (%d) to complete! \n",
-			   ioc->name, hd->tmPending));
-			return FAILED;
-		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler target "
-				"reset: Timed out waiting for last TM (%d) "
-				"to complete! \n", ioc->name,
-				hd->tmPending));
-			return FAILED;
-		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler bus reset: "
-			   "Timed out waiting for last TM (%d) to complete! \n",
-			  ioc->name, hd->tmPending));
-			return FAILED;
-		}
-	} else {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		hd->tmPending |=  (1 << type);
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-	}
+	unsigned long	 time_count;
 
+	issue_hard_reset = 0;
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
 
 	if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
 		printk(MYIOC_s_WARN_FMT
-			"TM Handler for type=%x: IOC Not operational (0x%x)!\n",
+			"TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
 			ioc->name, type, ioc_raw_state);
-		printk(MYIOC_s_WARN_FMT " Issuing HardReset!!\n", ioc->name);
+		printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
+		    ioc->name, __func__);
 		if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
-			printk(MYIOC_s_WARN_FMT "TMHandler: HardReset "
+			printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
 			    "FAILED!!\n", ioc->name);
-		return FAILED;
+		return 0;
 	}
 
 	if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
 		printk(MYIOC_s_WARN_FMT
-			"TM Handler for type=%x: ioc_state: "
+			"TaskMgmt type=%x: ioc_state: "
 			"DOORBELL_ACTIVE (0x%x)!\n",
 			ioc->name, type, ioc_raw_state);
 		return FAILED;
 	}
 
-	/* Isse the Task Mgmt request.
-	 */
-	if (hd->hard_resets < -1)
-		hd->hard_resets++;
-
-	rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
-	    ctx2abort, timeout);
-	if (rc)
-		printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
-		       ioc->name);
-	else
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issue of TaskMgmt Successful!\n",
-			   ioc->name));
-
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			"TMHandler rc = %d!\n", ioc->name, rc));
-
-	return rc;
-}
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
- *	@hd: Pointer to MPT_SCSI_HOST structure
- *	@type: Task Management type
- *	@channel: channel number for task management
- *	@id: Logical Target ID for reset (if appropriate)
- *	@lun: Logical Unit for reset (if appropriate)
- *	@ctx2abort: Context for the task to be aborted (if appropriate)
- *	@timeout: timeout for task management control
- *
- *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
- *	or a non-interrupt thread.  In the former, must not call schedule().
- *
- *	Not all fields are meaningfull for all task types.
- *
- *	Returns 0 for SUCCESS, or FAILED.
- *
- **/
-static int
-mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
-{
-	MPT_FRAME_HDR	*mf;
-	SCSITaskMgmt_t	*pScsiTm;
-	int		 ii;
-	int		 retval;
-	MPT_ADAPTER 	*ioc = hd->ioc;
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mf = NULL;
+		retval = FAILED;
+		goto out;
+	}
 
 	/* Return Fail to calling function if no message frames available.
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
-				ioc->name));
-		return FAILED;
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"TaskMgmt no msg frames!!\n", ioc->name));
+		retval = FAILED;
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		goto out;
 	}
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
 			ioc->name, mf));
 
 	/* Format the Request
@@ -1699,11 +1569,14 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, i
 
 	pScsiTm->TaskMsgContext = ctx2abort;
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
-		"type=%d\n", ioc->name, ctx2abort, type));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
+		"task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
+		type, timeout));
 
 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
 
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	time_count = jiffies;
 	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
 	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
 		mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
@@ -1711,47 +1584,50 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, i
 		retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
 			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
 		if (retval) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "send_handshake FAILED!"
-			" (hd %p, ioc %p, mf %p, rc=%d) \n", ioc->name, hd,
-			ioc, mf, retval));
-			goto fail_out;
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
+				ioc->name, mf, retval));
+			mpt_free_msg_frame(ioc, mf);
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
+			goto out;
 		}
 	}
 
-	if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
-		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "task management request TIMED OUT!"
-			" (hd %p, ioc %p, mf %p) \n", ioc->name, hd,
-			ioc, mf));
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
-			 ioc->name));
-		retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rc=%d \n",
-			 ioc->name, retval));
-		goto fail_out;
+	timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+		timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = FAILED;
+		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+		    "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		issue_hard_reset = 1;
+		goto out;
 	}
 
-	/*
-	 * Handle success case, see if theres a non-zero ioc_status.
-	 */
-	if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
-	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
-	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
-		retval = 0;
-	else
-		retval = FAILED;
+	retval = mptscsih_taskmgmt_reply(ioc, type,
+	    (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
 
-	return retval;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt completed (%d seconds)\n",
+	    ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
 
- fail_out:
+ out:
 
-	/*
-	 * Free task management mf, and corresponding tm flags
-	 */
-	mpt_free_msg_frame(ioc, mf);
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	return FAILED;
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	if (issue_hard_reset) {
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			ioc->name, __func__);
+		retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+		mpt_free_msg_frame(ioc, mf);
+	}
+
+	retval = (retval == 0) ? 0 : FAILED;
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+	return retval;
 }
+EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
 
 static int
 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
@@ -1838,13 +1714,8 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 		goto out;
 	}
 
-	if (hd->resetPending) {
-		retval = FAILED;
-		goto out;
-	}
-
-	if (hd->timeouts < -1)
-		hd->timeouts++;
+	if (ioc->timeouts < -1)
+		ioc->timeouts++;
 
 	if (mpt_fwfault_debug)
 		mpt_halt_firmware(ioc);
@@ -1861,22 +1732,30 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 
 	hd->abortSCpnt = SCpnt;
 
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
-	    vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun,
-	    ctx2abort, mptscsih_get_tm_timeout(ioc));
+	retval = mptscsih_IssueTaskMgmt(hd,
+			 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+			 vdevice->vtarget->channel,
+			 vdevice->vtarget->id, vdevice->lun,
+			 ctx2abort, mptscsih_get_tm_timeout(ioc));
 
 	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
-	    SCpnt->serial_number == sn)
+	    SCpnt->serial_number == sn) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "task abort: command still in active list! (sc=%p)\n",
+		    ioc->name, SCpnt));
 		retval = FAILED;
+	} else {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "task abort: command cleared from active list! (sc=%p)\n",
+		    ioc->name, SCpnt));
+		retval = SUCCESS;
+	}
 
  out:
 	printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
-	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
 
-	if (retval == 0)
-		return SUCCESS;
-	else
-		return FAILED;
+	return retval;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1909,14 +1788,9 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 	       ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
 
-	if (hd->resetPending) {
-		retval = FAILED;
-		goto out;
-	}
-
 	vdevice = SCpnt->device->hostdata;
 	if (!vdevice || !vdevice->vtarget) {
-		retval = 0;
+		retval = SUCCESS;
 		goto out;
 	}
 
@@ -1927,9 +1801,11 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 		goto out;
 	}
 
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
-	    vdevice->vtarget->channel, vdevice->vtarget->id, 0, 0,
-	    mptscsih_get_tm_timeout(ioc));
+	retval = mptscsih_IssueTaskMgmt(hd,
+				MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+				vdevice->vtarget->channel,
+				vdevice->vtarget->id, 0, 0,
+				mptscsih_get_tm_timeout(ioc));
 
  out:
 	printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
@@ -1972,12 +1848,16 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
 	       ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
 
-	if (hd->timeouts < -1)
-		hd->timeouts++;
+	if (ioc->timeouts < -1)
+		ioc->timeouts++;
 
 	vdevice = SCpnt->device->hostdata;
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
-	    vdevice->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(ioc));
+	if (!vdevice || !vdevice->vtarget)
+		return SUCCESS;
+	retval = mptscsih_IssueTaskMgmt(hd,
+					MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+					vdevice->vtarget->channel, 0, 0, 0,
+					mptscsih_get_tm_timeout(ioc));
 
 	printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
@@ -2001,8 +1881,9 @@ int
 mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 {
 	MPT_SCSI_HOST *  hd;
-	int              retval;
+	int              status = SUCCESS;
 	MPT_ADAPTER	*ioc;
+	int		retval;
 
 	/*  If we can't locate the host to reset, then we failed. */
 	if ((hd = shost_priv(SCpnt->device->host)) == NULL){
@@ -2021,86 +1902,71 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 	/*  If our attempts to reset the host failed, then return a failed
 	 *  status.  The host will be taken off line by the SCSI mid-layer.
 	 */
-	if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) {
-		retval = FAILED;
-	} else {
-		/*  Make sure TM pending is cleared and TM state is set to
-		 *  NONE.
-		 */
-		retval = 0;
-		hd->tmPending = 0;
-		hd->tmState = TM_STATE_NONE;
-	}
+    retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+	if (retval < 0)
+		status = FAILED;
+	else
+		status = SUCCESS;
 
 	printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
 
-	return retval;
+	return status;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_tm_pending_wait - wait for pending task management request to complete
- *	@hd: Pointer to MPT host structure.
- *
- *	Returns {SUCCESS,FAILED}.
- */
 static int
-mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+	SCSITaskMgmtReply_t *pScsiTmReply)
 {
-	unsigned long  flags;
-	int            loop_count = 4 * 10;  /* Wait 10 seconds */
-	int            status = FAILED;
-	MPT_ADAPTER	*ioc = hd->ioc;
+	u16			 iocstatus;
+	u32			 termination_count;
+	int			 retval;
 
-	do {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		if (hd->tmState == TM_STATE_NONE) {
-			hd->tmState = TM_STATE_IN_PROGRESS;
-			hd->tmPending = 1;
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-			status = SUCCESS;
-			break;
-		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		msleep(250);
-	} while (--loop_count);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		retval = FAILED;
+		goto out;
+	}
 
-	return status;
-}
+	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_tm_wait_for_completion - wait for completion of TM task
- *	@hd: Pointer to MPT host structure.
- *	@timeout: timeout value
- *
- *	Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
-{
-	unsigned long  flags;
-	int            loop_count = 4 * timeout;
-	int            status = FAILED;
-	MPT_ADAPTER	*ioc = hd->ioc;
+	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
 
-	do {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		if(hd->tmPending == 0) {
-			status = SUCCESS;
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-			break;
-		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		msleep(250);
-	} while (--loop_count);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
+	    "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
+	    "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
+	    pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
+	    le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
+	    termination_count));
 
-	return status;
+	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+	    pScsiTmReply->ResponseCode)
+		mptscsih_taskmgmt_response_code(ioc,
+		    pScsiTmReply->ResponseCode);
+
+	if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
+		retval = 0;
+		goto out;
+	}
+
+	retval = FAILED;
+	if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+		if (termination_count == 1)
+			retval = 0;
+		goto out;
+	}
+
+	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
+		retval = 0;
+
+ out:
+	return retval;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static void
+void
 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
 {
 	char *desc;
@@ -2134,6 +2000,7 @@ mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
 	printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
 		ioc->name, response_code, desc);
 }
+EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -2150,97 +2017,28 @@ mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
  *	Returns 1 indicating alloc'd request frame ptr should be freed.
  **/
 int
-mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
+	MPT_FRAME_HDR *mr)
 {
-	SCSITaskMgmtReply_t	*pScsiTmReply;
-	SCSITaskMgmt_t		*pScsiTmReq;
-	MPT_SCSI_HOST		*hd;
-	unsigned long		 flags;
-	u16			 iocstatus;
-	u8			 tmType;
-	u32			 termination_count;
-
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
-	    ioc->name, mf, mr));
-	if (!ioc->sh) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
-		    "TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
-		return 1;
-	}
-
-	if (mr == NULL) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
-		    "ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
-		return 1;
-	}
-
-	hd = shost_priv(ioc->sh);
-	pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
-	pScsiTmReq = (SCSITaskMgmt_t*)mf;
-	tmType = pScsiTmReq->TaskType;
-	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
 
-	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
-	    pScsiTmReply->ResponseCode)
-		mptscsih_taskmgmt_response_code(ioc,
-		    pScsiTmReply->ResponseCode);
-	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 
-#ifdef CONFIG_FUSION_LOGGING
-	if ((ioc->debug_level & MPT_DEBUG_REPLY) ||
-				(ioc->debug_level & MPT_DEBUG_TM ))
-		printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
-			"iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
-			"term_cmnds=%d\n", __func__, ioc->id, pScsiTmReply->Bus,
-			 pScsiTmReply->TargetID, pScsiTmReq->TaskType,
-			le16_to_cpu(pScsiTmReply->IOCStatus),
-			le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
-			le32_to_cpu(pScsiTmReply->TerminationCount));
-#endif
-	if (!iocstatus) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT " TaskMgmt SUCCESS\n", ioc->name));
-			hd->abortSCpnt = NULL;
+	if (!mr)
 		goto out;
-	}
-
-	/* Error?  (anything non-zero?) */
-
-	/* clear flags and continue.
-	 */
-	switch (tmType) {
-
-	case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
-		if (termination_count == 1)
-			iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
-		hd->abortSCpnt = NULL;
-		break;
-
-	case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
-
-		/* If an internal command is present
-		 * or the TM failed - reload the FW.
-		 * FC FW may respond FAILED to an ABORT
-		 */
-		if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
-		    hd->cmdPtr)
-			if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
-				printk(MYIOC_s_WARN_FMT " Firmware Reload FAILED!!\n", ioc->name);
-		break;
-
-	case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
-	default:
-		break;
-	}
 
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->taskmgmt_cmds.reply, mr,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
  out:
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->tm_iocstatus = iocstatus;
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	return 1;
+	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->taskmgmt_cmds.done);
+		return 1;
+	}
+	return 0;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2290,8 +2088,10 @@ int
 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	struct inactive_raid_component_info *component_info;
-	int i;
+	int i, j;
+	RaidPhysDiskPage1_t *phys_disk;
 	int rc = 0;
+	int num_paths;
 
 	if (!ioc->raid_data.pIocPg3)
 		goto out;
@@ -2303,6 +2103,45 @@ mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
 		}
 	}
 
+	if (ioc->bus_type != SAS)
+		goto out;
+
+	/*
+	 * Check if dual path
+	 */
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+		if (num_paths < 2)
+			continue;
+		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+		if (!phys_disk)
+			continue;
+		if ((mpt_raid_phys_disk_pg1(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+		    phys_disk))) {
+			kfree(phys_disk);
+			continue;
+		}
+		for (j = 0; j < num_paths; j++) {
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
+				continue;
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+				continue;
+			if ((id == phys_disk->Path[j].PhysDiskID) &&
+			    (channel == phys_disk->Path[j].PhysDiskBus)) {
+				rc = 1;
+				kfree(phys_disk);
+				goto out;
+			}
+		}
+		kfree(phys_disk);
+	}
+
+
 	/*
 	 * Check inactive list for matching phys disks
 	 */
@@ -2327,8 +2166,10 @@ u8
 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	struct inactive_raid_component_info *component_info;
-	int i;
+	int i, j;
+	RaidPhysDiskPage1_t *phys_disk;
 	int rc = -ENXIO;
+	int num_paths;
 
 	if (!ioc->raid_data.pIocPg3)
 		goto out;
@@ -2340,6 +2181,44 @@ mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
 		}
 	}
 
+	if (ioc->bus_type != SAS)
+		goto out;
+
+	/*
+	 * Check if dual path
+	 */
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+		if (num_paths < 2)
+			continue;
+		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+		if (!phys_disk)
+			continue;
+		if ((mpt_raid_phys_disk_pg1(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+		    phys_disk))) {
+			kfree(phys_disk);
+			continue;
+		}
+		for (j = 0; j < num_paths; j++) {
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
+				continue;
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+				continue;
+			if ((id == phys_disk->Path[j].PhysDiskID) &&
+			    (channel == phys_disk->Path[j].PhysDiskBus)) {
+				rc = phys_disk->PhysDiskNum;
+				kfree(phys_disk);
+				goto out;
+			}
+		}
+		kfree(phys_disk);
+	}
+
 	/*
 	 * Check inactive list for matching phys disks
 	 */
@@ -2457,7 +2336,6 @@ mptscsih_slave_configure(struct scsi_device *sdev)
 		    sdev->ppr, sdev->inquiry_len));
 
 	vdevice->configured_lun = 1;
-	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"Queue depth=%d, tflags=%x\n",
@@ -2469,6 +2347,7 @@ mptscsih_slave_configure(struct scsi_device *sdev)
 		    ioc->name, vtarget->negoFlags, vtarget->maxOffset,
 		    vtarget->minSyncFactor));
 
+	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"tagged %d, simple %d, ordered %d\n",
 		ioc->name,sdev->tagged_supported, sdev->simple_tags,
@@ -2542,15 +2421,13 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR
 }
 
 /**
- * mptscsih_get_scsi_lookup
+ * mptscsih_get_scsi_lookup - retrieves scmd entry
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * retrieves scmd entry from ScsiLookup[] array list
- *
  * Returns the scsi_cmd pointer
- **/
-static struct scsi_cmnd *
+ */
+struct scsi_cmnd *
 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
 {
 	unsigned long	flags;
@@ -2562,15 +2439,15 @@ mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
 
 	return scmd;
 }
+EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
 
 /**
- * mptscsih_getclear_scsi_lookup
+ * mptscsih_getclear_scsi_lookup -  retrieves and clears scmd entry from ScsiLookup[] array list
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * retrieves and clears scmd entry from ScsiLookup[] array list
- *
  * Returns the scsi_cmd pointer
+ *
  **/
 static struct scsi_cmnd *
 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
@@ -2635,94 +2512,33 @@ int
 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
-	unsigned long	 flags;
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": IOC %s_reset routed to SCSI host driver!\n",
-	    ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-	    reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	/* If a FW reload request arrives after base installed but
-	 * before all scsi hosts have been attached, then an alt_ioc
-	 * may have a NULL sh pointer.
-	 */
 	if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
 		return 0;
-	else
-		hd = shost_priv(ioc->sh);
-
-	if (reset_phase == MPT_IOC_SETUP_RESET) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Setup-Diag Reset\n", ioc->name));
-
-		/* Clean Up:
-		 * 1. Set Hard Reset Pending Flag
-		 * All new commands go to doneQ
-		 */
-		hd->resetPending = 1;
-
-	} else if (reset_phase == MPT_IOC_PRE_RESET) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Diag Reset\n", ioc->name));
 
-		/* 2. Flush running commands
-		 *	Clean ScsiLookup (and associated memory)
-		 *	AND clean mytaskQ
-		 */
-
-		/* 2b. Reply to OS all known outstanding I/O commands.
-		 */
+	hd = shost_priv(ioc->sh);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
 		mptscsih_flush_running_cmds(hd);
-
-		/* 2c. If there was an internal command that
-		 * has not completed, configuration or io request,
-		 * free these resources.
-		 */
-		if (hd->cmdPtr) {
-			del_timer(&hd->timer);
-			mpt_free_msg_frame(ioc, hd->cmdPtr);
-		}
-
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Reset complete.\n", ioc->name));
-
-	} else {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Diag Reset\n", ioc->name));
-
-		/* Once a FW reload begins, all new OS commands are
-		 * redirected to the doneQ w/ a reset status.
-		 * Init all control structures.
-		 */
-
-		/* 2. Chain Buffer initialization
-		 */
-
-		/* 4. Renegotiate to all devices, if SPI
-		 */
-
-		/* 5. Enable new commands to be posted
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		hd->tmPending = 0;
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		hd->resetPending = 0;
-		hd->tmState = TM_STATE_NONE;
-
-		/* 6. If there was an internal command,
-		 * wake this process up.
-		 */
-		if (hd->cmdPtr) {
-			/*
-			 * Wake up the original calling thread
-			 */
-			hd->pLocal = &hd->localReply;
-			hd->pLocal->completion = MPT_SCANDV_DID_RESET;
-			hd->scandv_wait_done = 1;
-			wake_up(&hd->scandv_waitq);
-			hd->cmdPtr = NULL;
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->internal_cmds.status |=
+				MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->internal_cmds.done);
 		}
-
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Reset complete.\n", ioc->name));
-
+		break;
+	default:
+		break;
 	}
-
 	return 1;		/* currently means nothing really */
 }
 
@@ -2730,55 +2546,16 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 int
 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 {
-	MPT_SCSI_HOST *hd;
 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
 
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
-			ioc->name, event));
-
-	if (ioc->sh == NULL ||
-		((hd = shost_priv(ioc->sh)) == NULL))
-		return 1;
-
-	switch (event) {
-	case MPI_EVENT_UNIT_ATTENTION:			/* 03 */
-		/* FIXME! */
-		break;
-	case MPI_EVENT_IOC_BUS_RESET:			/* 04 */
-	case MPI_EVENT_EXT_BUS_RESET:			/* 05 */
-		if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
-			hd->soft_resets++;
-		break;
-	case MPI_EVENT_LOGOUT:				/* 09 */
-		/* FIXME! */
-		break;
-
-	case MPI_EVENT_RESCAN:				/* 06 */
-		break;
-
-		/*
-		 *  CHECKME! Don't think we need to do
-		 *  anything for these, but...
-		 */
-	case MPI_EVENT_LINK_STATUS_CHANGE:		/* 07 */
-	case MPI_EVENT_LOOP_STATE_CHANGE:		/* 08 */
-		/*
-		 *  CHECKME!  Falling thru...
-		 */
-		break;
-
-	case MPI_EVENT_INTEGRATED_RAID:			/* 0B */
-		break;
+	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"MPT event (=%02Xh) routed to SCSI host driver!\n",
+		ioc->name, event));
 
-	case MPI_EVENT_NONE:				/* 00 */
-	case MPI_EVENT_LOG_DATA:			/* 01 */
-	case MPI_EVENT_STATE_CHANGE:			/* 02 */
-	case MPI_EVENT_EVENT_CHANGE:			/* 0A */
-	default:
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": Ignoring event (=%02Xh)\n",
-		    ioc->name, event));
-		break;
-	}
+	if ((event == MPI_EVENT_IOC_BUS_RESET ||
+	    event == MPI_EVENT_EXT_BUS_RESET) &&
+	    (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
+			ioc->soft_resets++;
 
 	return 1;		/* currently means nothing really */
 }
@@ -2809,153 +2586,44 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
  *	Used ONLY for DV and other internal commands.
  */
 int
-mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+				MPT_FRAME_HDR *reply)
 {
-	MPT_SCSI_HOST	*hd;
 	SCSIIORequest_t *pReq;
-	int		 completionCode;
+	SCSIIOReply_t	*pReply;
+	u8		 cmd;
 	u16		 req_idx;
+	u8	*sense_data;
+	int		 sz;
 
-	hd = shost_priv(ioc->sh);
-
-	if ((mf == NULL) ||
-	    (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
-		printk(MYIOC_s_ERR_FMT
-			"ScanDvComplete, %s req frame ptr! (=%p)\n",
-				ioc->name, mf?"BAD":"NULL", (void *) mf);
-		goto wakeup;
-	}
-
-	del_timer(&hd->timer);
-	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
-	mptscsih_set_scsi_lookup(ioc, req_idx, NULL);
-	pReq = (SCSIIORequest_t *) mf;
+	ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+	ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
+	if (!reply)
+		goto out;
 
-	if (mf != hd->cmdPtr) {
-		printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
-				ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
+	pReply = (SCSIIOReply_t *) reply;
+	pReq = (SCSIIORequest_t *) req;
+	ioc->internal_cmds.completion_code =
+	    mptscsih_get_completion_code(ioc, req, reply);
+	ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->internal_cmds.reply, reply,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
+	cmd = reply->u.hdr.Function;
+	if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+	    (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
+	    (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+		req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
+		sense_data = ((u8 *)ioc->sense_buf_pool +
+		    (req_idx * MPT_SENSE_BUFFER_ALLOC));
+		sz = min_t(int, pReq->SenseBufferLength,
+		    MPT_SENSE_BUFFER_ALLOC);
+		memcpy(ioc->internal_cmds.sense, sense_data, sz);
 	}
-	hd->cmdPtr = NULL;
-
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
-			ioc->name, mf, mr, req_idx));
-
-	hd->pLocal = &hd->localReply;
-	hd->pLocal->scsiStatus = 0;
-
-	/* If target struct exists, clear sense valid flag.
-	 */
-	if (mr == NULL) {
-		completionCode = MPT_SCANDV_GOOD;
-	} else {
-		SCSIIOReply_t	*pReply;
-		u16		 status;
-		u8		 scsi_status;
-
-		pReply = (SCSIIOReply_t *) mr;
-
-		status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-		scsi_status = pReply->SCSIStatus;
-
-
-		switch(status) {
-
-		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
-			completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
-			break;
-
-		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
-		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
-		case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
-		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
-			completionCode = MPT_SCANDV_DID_RESET;
-			break;
-
-		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
-		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
-		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
-			if (pReply->Function == MPI_FUNCTION_CONFIG) {
-				ConfigReply_t *pr = (ConfigReply_t *)mr;
-				completionCode = MPT_SCANDV_GOOD;
-				hd->pLocal->header.PageVersion = pr->Header.PageVersion;
-				hd->pLocal->header.PageLength = pr->Header.PageLength;
-				hd->pLocal->header.PageNumber = pr->Header.PageNumber;
-				hd->pLocal->header.PageType = pr->Header.PageType;
-
-			} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
-				/* If the RAID Volume request is successful,
-				 * return GOOD, else indicate that
-				 * some type of error occurred.
-				 */
-				MpiRaidActionReply_t	*pr = (MpiRaidActionReply_t *)mr;
-				if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
-					completionCode = MPT_SCANDV_GOOD;
-				else
-					completionCode = MPT_SCANDV_SOME_ERROR;
-				memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));
-
-			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
-				u8		*sense_data;
-				int		 sz;
-
-				/* save sense data in global structure
-				 */
-				completionCode = MPT_SCANDV_SENSE;
-				hd->pLocal->scsiStatus = scsi_status;
-				sense_data = ((u8 *)ioc->sense_buf_pool +
-					(req_idx * MPT_SENSE_BUFFER_ALLOC));
-
-				sz = min_t(int, pReq->SenseBufferLength,
-							SCSI_STD_SENSE_BYTES);
-				memcpy(hd->pLocal->sense, sense_data, sz);
-
-				ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Check Condition, sense ptr %p\n",
-				    ioc->name, sense_data));
-			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
-				if (pReq->CDB[0] == INQUIRY)
-					completionCode = MPT_SCANDV_ISSUE_SENSE;
-				else
-					completionCode = MPT_SCANDV_DID_RESET;
-			}
-			else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else {
-				completionCode = MPT_SCANDV_GOOD;
-				hd->pLocal->scsiStatus = scsi_status;
-			}
-			break;
-
-		case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
-			if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else
-				completionCode = MPT_SCANDV_SOME_ERROR;
-			break;
-
-		default:
-			completionCode = MPT_SCANDV_SOME_ERROR;
-			break;
-
-		}	/* switch(status) */
-
-	} /* end of address reply case */
-
-	hd->pLocal->completion = completionCode;
-
-	/* MF and RF are freed in mpt_interrupt
-	 */
-wakeup:
-	/* Free Chain buffers (will never chain) in scan or dv */
-	//mptscsih_freeChainBuffers(ioc, req_idx);
-
-	/*
-	 * Wake up the original calling thread
-	 */
-	hd->scandv_wait_done = 1;
-	wake_up(&hd->scandv_waitq);
-
+ out:
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
+		return 0;
+	ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+	complete(&ioc->internal_cmds.done);
 	return 1;
 }
 
@@ -3004,6 +2672,95 @@ mptscsih_timer_expired(unsigned long data)
 	return;
 }
 
+/**
+ *	mptscsih_get_completion_code -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@req: Pointer to original MPT request frame
+ *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
+ *
+ **/
+static int
+mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+				MPT_FRAME_HDR *reply)
+{
+	SCSIIOReply_t	*pReply;
+	MpiRaidActionReply_t *pr;
+	u8		 scsi_status;
+	u16		 status;
+	int		 completion_code;
+
+	pReply = (SCSIIOReply_t *)reply;
+	status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	scsi_status = pReply->SCSIStatus;
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
+	    "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
+	    scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
+
+	switch (status) {
+
+	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
+		completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
+	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
+	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
+	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
+		completion_code = MPT_SCANDV_DID_RESET;
+		break;
+
+	case MPI_IOCSTATUS_BUSY:
+	case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		completion_code = MPT_SCANDV_BUSY;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
+	case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
+	case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
+		if (pReply->Function == MPI_FUNCTION_CONFIG) {
+			completion_code = MPT_SCANDV_GOOD;
+		} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
+			pr = (MpiRaidActionReply_t *)reply;
+			if (le16_to_cpu(pr->ActionStatus) ==
+				MPI_RAID_ACTION_ASTATUS_SUCCESS)
+				completion_code = MPT_SCANDV_GOOD;
+			else
+				completion_code = MPT_SCANDV_SOME_ERROR;
+		} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
+			completion_code = MPT_SCANDV_SENSE;
+		else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
+			if (req->u.scsireq.CDB[0] == INQUIRY)
+				completion_code = MPT_SCANDV_ISSUE_SENSE;
+			else
+				completion_code = MPT_SCANDV_DID_RESET;
+		} else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else if (scsi_status == MPI_SCSI_STATUS_BUSY)
+			completion_code = MPT_SCANDV_BUSY;
+		else
+			completion_code = MPT_SCANDV_GOOD;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
+		if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else
+			completion_code = MPT_SCANDV_SOME_ERROR;
+		break;
+	default:
+		completion_code = MPT_SCANDV_SOME_ERROR;
+		break;
+
+	}	/* switch(status) */
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "  completionCode set to %08xh\n", ioc->name, completion_code));
+	return completion_code;
+}
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -3030,22 +2787,27 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSIIORequest_t	*pScsiReq;
-	SCSIIORequest_t	 ReqCopy;
 	int		 my_idx, ii, dir;
-	int		 rc, cmdTimeout;
-	int		in_isr;
+	int		 timeout;
 	char		 cmdLen;
 	char		 CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-	char		 cmd = io->cmd;
-	MPT_ADAPTER 	*ioc = hd->ioc;
+	u8		 cmd = io->cmd;
+	MPT_ADAPTER *ioc = hd->ioc;
+	int		 ret = 0;
+	unsigned long	 timeleft;
+	unsigned long	 flags;
 
-	in_isr = in_interrupt();
-	if (in_isr) {
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Internal SCSI IO request not allowed in ISR context!\n",
-					ioc->name));
-		return -EPERM;
+	/* don't send internal command during diag reset */
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"%s: busy with host reset\n", ioc->name, __func__));
+		return MPT_SCANDV_BUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
+	mutex_lock(&ioc->internal_cmds.mutex);
 
 	/* Set command specific information
 	 */
@@ -3055,13 +2817,13 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 		CDB[4] = io->size;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case TEST_UNIT_READY:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case START_STOP:
@@ -3069,7 +2831,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 		CDB[4] = 1;	/*Spin up the disk */
-		cmdTimeout = 15;
+		timeout = 15;
 		break;
 
 	case REQUEST_SENSE:
@@ -3077,7 +2839,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		CDB[0] = cmd;
 		CDB[4] = io->size;
 		dir = MPI_SCSIIO_CONTROL_READ;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case READ_BUFFER:
@@ -3096,7 +2858,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		CDB[6] = (io->size >> 16) & 0xFF;
 		CDB[7] = (io->size >>  8) & 0xFF;
 		CDB[8] = io->size & 0xFF;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case WRITE_BUFFER:
@@ -3111,21 +2873,21 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		CDB[6] = (io->size >> 16) & 0xFF;
 		CDB[7] = (io->size >>  8) & 0xFF;
 		CDB[8] = io->size & 0xFF;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case RESERVE:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case RELEASE:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case SYNCHRONIZE_CACHE:
@@ -3133,20 +2895,23 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 //		CDB[1] = 0x02;	/* set immediate bit */
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	default:
 		/* Error Case */
-		return -EFAULT;
+		ret = -EFAULT;
+		goto out;
 	}
 
 	/* Get and Populate a free Frame
+	 * MsgContext set in mpt_get_msg_frame call
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "No msg frames!\n",
-		    ioc->name));
-		return -EBUSY;
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
+		    ioc->name, __func__));
+		ret = MPT_SCANDV_BUSY;
+		goto out;
 	}
 
 	pScsiReq = (SCSIIORequest_t *) mf;
@@ -3172,7 +2937,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 
 	pScsiReq->Reserved = 0;
 
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	/* MsgContext set in mpt_get_msg_fram call  */
 
 	int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
@@ -3184,74 +2949,58 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 
 	if (cmd == REQUEST_SENSE) {
 		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
-		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Untagged! 0x%2x\n",
-			ioc->name, cmd));
+		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
 	}
 
-	for (ii=0; ii < 16; ii++)
+	for (ii = 0; ii < 16; ii++)
 		pScsiReq->CDB[ii] = CDB[ii];
 
 	pScsiReq->DataLength = cpu_to_le32(io->size);
 	pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
 					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));
 
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
-			ioc->name, cmd, io->channel, io->id, io->lun));
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%d\n",
+	    ioc->name, __func__, cmd, io->channel, io->id, io->lun));
 
-	if (dir == MPI_SCSIIO_CONTROL_READ) {
-		mpt_add_sge((char *) &pScsiReq->SGL,
-			MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
-			io->data_dma);
-	} else {
-		mpt_add_sge((char *) &pScsiReq->SGL,
-			MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
-			io->data_dma);
-	}
-
-	/* The ISR will free the request frame, but we need
-	 * the information to initialize the target. Duplicate.
-	 */
-	memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
-
-	/* Issue this command after:
-	 *	finish init
-	 *	add timer
-	 * Wait until the reply has been received
-	 *  ScsiScanDvCtx callback function will
-	 *	set hd->pLocal;
-	 *	set scandv_wait_done and call wake_up
-	 */
-	hd->pLocal = NULL;
-	hd->timer.expires = jiffies + HZ*cmdTimeout;
-	hd->scandv_wait_done = 0;
-
-	/* Save cmd pointer, for resource free if timeout or
-	 * FW reload occurs
-	 */
-	hd->cmdPtr = mf;
+	if (dir == MPI_SCSIIO_CONTROL_READ)
+		ioc->add_sge((char *) &pScsiReq->SGL,
+		    MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
+	else
+		ioc->add_sge((char *) &pScsiReq->SGL,
+		    MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
 
-	add_timer(&hd->timer);
+	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
-	wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
-	if (hd->pLocal) {
-		rc = hd->pLocal->completion;
-		hd->pLocal->skip = 0;
-
-		/* Always set fatal error codes in some cases.
-		 */
-		if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
-			rc = -ENXIO;
-		else if (rc == MPT_SCANDV_SOME_ERROR)
-			rc =  -rc;
-	} else {
-		rc = -EFAULT;
-		/* This should never happen. */
-		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "_do_cmd: Null pLocal!!!\n",
-				ioc->name));
+	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = MPT_SCANDV_DID_RESET;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
+		    cmd));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(ioc, mf);
+			goto out;
+		}
+		if (!timeleft) {
+			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
 	}
 
-	return rc;
+	ret = ioc->internal_cmds.completion_code;
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
+			ioc->name, __func__, ret));
+
+ out:
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	mutex_unlock(&ioc->internal_cmds.mutex);
+	return ret;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -3491,6 +3240,7 @@ struct device_attribute *mptscsih_host_attrs[] = {
 	&dev_attr_debug_level,
 	NULL,
 };
+
 EXPORT_SYMBOL(mptscsih_host_attrs);
 
 EXPORT_SYMBOL(mptscsih_remove);
@@ -3516,6 +3266,5 @@ EXPORT_SYMBOL(mptscsih_event_process);
 EXPORT_SYMBOL(mptscsih_ioc_reset);
 EXPORT_SYMBOL(mptscsih_change_queue_depth);
 EXPORT_SYMBOL(mptscsih_timer_expired);
-EXPORT_SYMBOL(mptscsih_TMHandler);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 319aa303337..eb3f677528a 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -60,6 +60,7 @@
 #define MPT_SCANDV_SELECTION_TIMEOUT	(0x00000008)
 #define MPT_SCANDV_ISSUE_SENSE		(0x00000010)
 #define MPT_SCANDV_FALLBACK		(0x00000020)
+#define MPT_SCANDV_BUSY			(0x00000040)
 
 #define MPT_SCANDV_MAX_RETRIES		(10)
 
@@ -89,6 +90,7 @@
 
 #endif
 
+
 typedef struct _internal_cmd {
 	char		*data;		/* data pointer */
 	dma_addr_t	data_dma;	/* data dma address */
@@ -112,6 +114,8 @@ extern int mptscsih_resume(struct pci_dev *pdev);
 extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
 extern const char * mptscsih_info(struct Scsi_Host *SChost);
 extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
+extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
+	u8 id, int lun, int ctx2abort, ulong timeout);
 extern void mptscsih_slave_destroy(struct scsi_device *device);
 extern int mptscsih_slave_configure(struct scsi_device *device);
 extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
@@ -126,7 +130,8 @@ extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE
 extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
 extern void mptscsih_timer_expired(unsigned long data);
-extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
 extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern struct device_attribute *mptscsih_host_attrs[];
+extern struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 61620144e49..c5b808fd55b 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -300,7 +300,7 @@ mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
 		(IOCPage4Ptr->Header.PageLength + ii) * 4;
 
-	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
 
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
@@ -614,19 +614,24 @@ static void mptspi_read_parameters(struct scsi_target *starget)
 	spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
 }
 
-static int
+int
 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
 {
+	MPT_ADAPTER	*ioc = hd->ioc;
 	MpiRaidActionRequest_t	*pReq;
 	MPT_FRAME_HDR		*mf;
-	MPT_ADAPTER *ioc = hd->ioc;
+	int			ret;
+	unsigned long 	 	timeleft;
+
+	mutex_lock(&ioc->internal_cmds.mutex);
 
 	/* Get and Populate a free Frame
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
-		ddvprintk(ioc, printk(MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
-					ioc->name));
-		return -EAGAIN;
+		dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
+			"%s: no msg frames!\n", ioc->name, __func__));
+		ret = -EAGAIN;
+		goto out;
 	}
 	pReq = (MpiRaidActionRequest_t *)mf;
 	if (quiesce)
@@ -643,29 +648,36 @@ mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
 	pReq->Reserved2 = 0;
 	pReq->ActionDataWord = 0; /* Reserved for this action */
 
-	mpt_add_sge((char *)&pReq->ActionDataSGE,
+	ioc->add_sge((char *)&pReq->ActionDataSGE,
 		MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
 
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
 			ioc->name, pReq->Action, channel, id));
 
-	hd->pLocal = NULL;
-	hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
-	hd->scandv_wait_done = 0;
-
-	/* Save cmd pointer, for resource free if timeout or
-	 * FW reload occurs
-	 */
-	hd->cmdPtr = mf;
-
-	add_timer(&hd->timer);
+	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
-	wait_event(hd->scandv_waitq, hd->scandv_wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
+		    ioc->name, __func__));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft) {
+			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
+	}
 
-	if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0))
-		return -1;
+	ret = ioc->internal_cmds.completion_code;
 
-	return 0;
+ out:
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	mutex_unlock(&ioc->internal_cmds.mutex);
+	return ret;
 }
 
 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
@@ -1423,17 +1435,15 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -1464,9 +1474,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -1493,8 +1500,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		mpt_saf_te));
 	ioc->spi_data.noQas = 0;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 	hd->spi_pending = 0;
 
@@ -1514,7 +1519,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * issue internal bus reset
 	 */
 	if (ioc->spi_data.bus_reset)
-		mptscsih_TMHandler(hd,
+		mptscsih_IssueTaskMgmt(hd,
 		    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
 		    0, 0, 0, 0, 5);
 
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index e9f4323dd2c..875f7a87573 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+static const struct tmio_mmc_data t7166xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static const struct resource t7l66xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = t7l66xb_mmc_enable,
 		.disable = t7l66xb_mmc_disable,
+		.driver_data = &t7166xb_mmc_data,
 		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
 		.resources = t7l66xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 43222c12fec..c3993ac2054 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+const static struct tmio_mmc_data tc6387xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource tc6387xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = tc6387xb_mmc_enable,
 		.disable = tc6387xb_mmc_disable,
+		.driver_data = &tc6387xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
 		.resources = tc6387xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 77a12fc8045..9d2abb5d6e2 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 	return 0;
 }
 
+const static struct tmio_mmc_data tc6393xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
 		.start	= 0x1000,
@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	},
 	[TC6393XB_CELL_MMC] = {
 		.name = "tmio-mmc",
+		.driver_data = &tc6393xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
 		.resources = tc6393xb_mmc_resources,
 	},
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6d1ac180f6e..68ab39d7cb3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -235,5 +235,6 @@ config ISL29003
 
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7871f05dcb9..36f733cd60e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-y				+= eeprom/
+obj-y				+= cb710/
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
new file mode 100644
index 00000000000..22429b8b106
--- /dev/null
+++ b/drivers/misc/cb710/Kconfig
@@ -0,0 +1,25 @@
+config CB710_CORE
+	tristate "ENE CB710/720 Flash memory card reader support"
+	depends on PCI
+	help
+	  This option enables support for PCI ENE CB710/720 Flash memory card
+	  reader found in some laptops (ie. some versions of HP Compaq nx9500).
+
+	  You will also have to select some flash card format drivers (MMC/SD,
+	  MemoryStick).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710.
+
+config CB710_DEBUG
+	bool "Enable driver debugging"
+	depends on CB710_CORE != n
+	default n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This adds a lot of debugging output to dmesg.
+
+config CB710_DEBUG_ASSUMPTIONS
+	bool
+	depends on CB710_CORE != n
+	default y
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
new file mode 100644
index 00000000000..7b80cbf1a60
--- /dev/null
+++ b/drivers/misc/cb710/Makefile
@@ -0,0 +1,8 @@
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
+obj-$(CONFIG_CB710_CORE)	+= cb710.o
+
+cb710-y				:= core.o sgbuf2.o
+cb710-$(CONFIG_CB710_DEBUG)	+= debug.o
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
new file mode 100644
index 00000000000..b14eab0f2ba
--- /dev/null
+++ b/drivers/misc/cb710/core.c
@@ -0,0 +1,357 @@
+/*
+ *  cb710/core.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/cb710.h>
+
+static DEFINE_IDA(cb710_ida);
+static DEFINE_SPINLOCK(cb710_ida_lock);
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t mask, uint32_t xor)
+{
+	u32 rval;
+
+	pci_read_config_dword(pdev, reg, &rval);
+	rval = (rval & mask) ^ xor;
+	pci_write_config_dword(pdev, reg, rval);
+}
+EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
+
+/* Some magic writes based on Windows driver init code */
+static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+{
+	unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+	struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+	u32 val;
+
+	cb710_pci_update_config_reg(pdev, 0x48,
+		~0x000000FF, 0x0000003F);
+
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (val & 0x80000000)
+		return 0;
+
+	if (!pdev0)
+		return -ENODEV;
+
+	if (pdev0->vendor == PCI_VENDOR_ID_ENE
+	    && pdev0->device == PCI_DEVICE_ID_ENE_720) {
+		cb710_pci_update_config_reg(pdev0, 0x8C,
+			~0x00F00000, 0x00100000);
+		cb710_pci_update_config_reg(pdev0, 0xB0,
+			~0x08000000, 0x08000000);
+	}
+
+	cb710_pci_update_config_reg(pdev0, 0x8C,
+		~0x00000F00, 0x00000200);
+	cb710_pci_update_config_reg(pdev0, 0x90,
+		~0x00060000, 0x00040000);
+
+	pci_dev_put(pdev0);
+
+	return 0;
+}
+
+static irqreturn_t cb710_irq_handler(int irq, void *data)
+{
+	struct cb710_chip *chip = data;
+	struct cb710_slot *slot = &chip->slot[0];
+	irqreturn_t handled = IRQ_NONE;
+	unsigned nr;
+
+	spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
+
+	for (nr = chip->slots; nr; ++slot, --nr) {
+		cb710_irq_handler_t handler_func = slot->irq_handler;
+		if (handler_func && handler_func(slot))
+			handled = IRQ_HANDLED;
+	}
+
+	spin_unlock(&chip->irq_lock);
+
+	return handled;
+}
+
+static void cb710_release_slot(struct device *dev)
+{
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+
+	/* slot struct can be freed now */
+	atomic_dec(&chip->slot_refs_count);
+#endif
+}
+
+static int __devinit cb710_register_slot(struct cb710_chip *chip,
+	unsigned slot_mask, unsigned io_offset, const char *name)
+{
+	int nr = chip->slots;
+	struct cb710_slot *slot = &chip->slot[nr];
+	int err;
+
+	dev_dbg(cb710_chip_dev(chip),
+		"register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
+		name, chip->platform_id, nr, slot_mask, io_offset);
+
+	/* slot->irq_handler == NULL here; this needs to be
+	 * seen before platform_device_register() */
+	++chip->slots;
+	smp_wmb();
+
+	slot->iobase = chip->iobase + io_offset;
+	slot->pdev.name = name;
+	slot->pdev.id = chip->platform_id;
+	slot->pdev.dev.parent = &chip->pdev->dev;
+	slot->pdev.dev.release = cb710_release_slot;
+
+	err = platform_device_register(&slot->pdev);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_inc(&chip->slot_refs_count);
+#endif
+
+	if (err) {
+		/* device_initialize() called from platform_device_register()
+		 * wants this on error path */
+		platform_device_put(&slot->pdev);
+
+		/* slot->irq_handler == NULL here anyway, so no lock needed */
+		--chip->slots;
+		return err;
+	}
+
+	chip->slot_mask |= slot_mask;
+
+	return 0;
+}
+
+static void cb710_unregister_slot(struct cb710_chip *chip,
+	unsigned slot_mask)
+{
+	int nr = chip->slots - 1;
+
+	if (!(chip->slot_mask & slot_mask))
+		return;
+
+	platform_device_unregister(&chip->slot[nr].pdev);
+
+	/* complementary to spin_unlock() in cb710_set_irq_handler() */
+	smp_rmb();
+	BUG_ON(chip->slot[nr].irq_handler != NULL);
+
+	/* slot->irq_handler == NULL here, so no lock needed */
+	--chip->slots;
+	chip->slot_mask &= ~slot_mask;
+}
+
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler)
+{
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	slot->irq_handler = handler;
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
+
+#ifdef CONFIG_PM
+
+static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+
+	free_irq(pdev->irq, chip);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	if (state.event & PM_EVENT_SLEEP)
+		pci_set_power_state(pdev, PCI_D3cold);
+	return 0;
+}
+
+static int cb710_resume(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	return devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct cb710_chip *chip;
+	unsigned long flags;
+	u32 val;
+	int err;
+	int n = 0;
+
+	err = cb710_pci_configure(pdev);
+	if (err)
+		return err;
+
+	/* this is actually magic... */
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (!(val & 0x80000000)) {
+		pci_write_config_dword(pdev, 0x48, val|0x71000000);
+		pci_read_config_dword(pdev, 0x48, &val);
+	}
+
+	dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
+	if (!(val & 0x70000000))
+		return -ENODEV;
+	val = (val >> 28) & 7;
+	if (val & CB710_SLOT_MMC)
+		++n;
+	if (val & CB710_SLOT_MS)
+		++n;
+	if (val & CB710_SLOT_SM)
+		++n;
+
+	chip = devm_kzalloc(&pdev->dev,
+		sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
+	if (err)
+		return err;
+
+	chip->pdev = pdev;
+	chip->iobase = pcim_iomap_table(pdev)[0];
+
+	pci_set_drvdata(pdev, chip);
+
+	err = devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (err)
+		return err;
+
+	do {
+		if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
+			return -ENOMEM;
+
+		spin_lock_irqsave(&cb710_ida_lock, flags);
+		err = ida_get_new(&cb710_ida, &chip->platform_id);
+		spin_unlock_irqrestore(&cb710_ida_lock, flags);
+
+		if (err && err != -EAGAIN)
+			return err;
+	} while (err);
+
+
+	dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
+		chip->platform_id, chip->iobase, pdev->irq);
+
+	if (val & CB710_SLOT_MMC) {	/* MMC/SD slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MMC, 0x00, "cb710-mmc");
+		if (err)
+			return err;
+	}
+
+	if (val & CB710_SLOT_MS) {	/* MemoryStick slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MS, 0x40, "cb710-ms");
+		if (err)
+			goto unreg_mmc;
+	}
+
+	if (val & CB710_SLOT_SM) {	/* SmartMedia slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_SM, 0x60, "cb710-sm");
+		if (err)
+			goto unreg_ms;
+	}
+
+	return 0;
+unreg_ms:
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+unreg_mmc:
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+	return err;
+}
+
+static void __devexit cb710_remove_one(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	cb710_unregister_slot(chip, CB710_SLOT_SM);
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+
+	spin_lock_irqsave(&cb710_ida_lock, flags);
+	ida_remove(&cb710_ida, chip->platform_id);
+	spin_unlock_irqrestore(&cb710_ida_lock, flags);
+}
+
+static const struct pci_device_id cb710_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }
+};
+
+static struct pci_driver cb710_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = cb710_pci_tbl,
+	.probe = cb710_probe,
+	.remove = __devexit_p(cb710_remove_one),
+#ifdef CONFIG_PM
+	.suspend = cb710_suspend,
+	.resume = cb710_resume,
+#endif
+};
+
+static int __init cb710_init_module(void)
+{
+	return pci_register_driver(&cb710_driver);
+}
+
+static void __exit cb710_cleanup_module(void)
+{
+	pci_unregister_driver(&cb710_driver);
+	ida_destroy(&cb710_ida);
+}
+
+module_init(cb710_init_module);
+module_exit(cb710_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c
new file mode 100644
index 00000000000..02358d086e0
--- /dev/null
+++ b/drivers/misc/cb710/debug.c
@@ -0,0 +1,119 @@
+/*
+ *  cb710/debug.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cb710.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CB710_REG_COUNT		0x80
+
+static const u16 allow[CB710_REG_COUNT/16] = {
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+};
+static const char *const prefix[ARRAY_SIZE(allow)] = {
+	"MMC", "MMC", "MMC", "MMC",
+	"MS?", "MS?", "SM?", "SM?"
+};
+
+static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
+{
+	unsigned mask = (1 << bits/8) - 1;
+	offset *= bits/8;
+	return ((allow[block] >> offset) & mask) == mask;
+}
+
+#define CB710_READ_REGS_TEMPLATE(t)					\
+static void cb710_read_regs_##t(void __iomem *iobase,			\
+	u##t *reg, unsigned select)					\
+{									\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))					\
+			continue;					\
+									\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			if (!allow_reg_read(i, j, t))			\
+				continue;				\
+			reg[j] = ioread##t(iobase			\
+				+ (i << 4) + (j * (t/8)));		\
+		}							\
+	}								\
+}
+
+static const char cb710_regf_8[] = "%02X";
+static const char cb710_regf_16[] = "%04X";
+static const char cb710_regf_32[] = "%08X";
+static const char cb710_xes[] = "xxxxxxxx";
+
+#define CB710_DUMP_REGS_TEMPLATE(t)					\
+static void cb710_dump_regs_##t(struct device *dev,			\
+	const u##t *reg, unsigned select)				\
+{									\
+	const char *const xp = &cb710_xes[8 - t/4];			\
+	const char *const format = cb710_regf_##t;			\
+									\
+	char msg[100], *p;						\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))				\
+			continue;					\
+		p = msg;						\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			*p++ = ' ';					\
+			if (j == 8/(t/8))				\
+				*p++ = ' ';				\
+			if (allow_reg_read(i, j, t))			\
+				p += sprintf(p, format, reg[j]);	\
+			else						\
+				p += sprintf(p, "%s", xp);		\
+		}							\
+		dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg);	\
+	}								\
+}
+
+#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t)				\
+static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip,	\
+	unsigned select)						\
+{									\
+	u##t regs[CB710_REG_COUNT/sizeof(u##t)];			\
+									\
+	memset(&regs, 0, sizeof(regs));					\
+	cb710_read_regs_##t(chip->iobase, regs, select);		\
+	cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select);	\
+}
+
+#define CB710_REG_ACCESS_TEMPLATES(t)		\
+  CB710_READ_REGS_TEMPLATE(t)			\
+  CB710_DUMP_REGS_TEMPLATE(t)			\
+  CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
+
+CB710_REG_ACCESS_TEMPLATES(8)
+CB710_REG_ACCESS_TEMPLATES(16)
+CB710_REG_ACCESS_TEMPLATES(32)
+
+void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
+{
+	if (!(select & CB710_DUMP_REGS_MASK))
+		select = CB710_DUMP_REGS_ALL;
+	if (!(select & CB710_DUMP_ACCESS_MASK))
+		select |= CB710_DUMP_ACCESS_8;
+
+	if (select & CB710_DUMP_ACCESS_32)
+		cb710_read_and_dump_regs_32(chip, select);
+	if (select & CB710_DUMP_ACCESS_16)
+		cb710_read_and_dump_regs_16(chip, select);
+	if (select & CB710_DUMP_ACCESS_8)
+		cb710_read_and_dump_regs_8(chip, select);
+}
+EXPORT_SYMBOL_GPL(cb710_dump_regs);
+
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
new file mode 100644
index 00000000000..d38a7acdb6e
--- /dev/null
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -0,0 +1,150 @@
+/*
+ *  cb710/sgbuf2.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cb710.h>
+
+static bool sg_dwiter_next(struct sg_mapping_iter *miter)
+{
+	if (sg_miter_next(miter)) {
+		miter->consumed = 0;
+		return true;
+	} else
+		return false;
+}
+
+static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
+{
+	return miter->length == miter->consumed && !sg_dwiter_next(miter);
+}
+
+static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
+{
+	size_t len, left = 4;
+	uint32_t data;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(addr, miter->addr + miter->consumed, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return data;
+		addr += len;
+	} while (sg_dwiter_next(miter));
+
+	memset(addr, 0, left);
+	return data;
+}
+
+static inline bool needs_unaligned_copy(const void *ptr)
+{
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+	return false;
+#else
+	return ((ptr - NULL) & 3) != 0;
+#endif
+}
+
+static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
+{
+	size_t len;
+
+	if (sg_dwiter_is_at_end(miter))
+		return true;
+
+	len = miter->length - miter->consumed;
+
+	if (likely(len >= 4 && !needs_unaligned_copy(
+			miter->addr + miter->consumed))) {
+		*ptr = miter->addr + miter->consumed;
+		miter->consumed += 4;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
+ * @miter: sg mapping iterator used for reading
+ *
+ * Description:
+ *   Returns 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes past the buffer's end
+ *   are not accessed (read) but are returned as zeroes.  @miter@
+ *   is advanced by 4 bytes or to the end of buffer whichever is
+ *   closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ *
+ * Returns:
+ *   32-bit word just read.
+ */
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr)))
+		return ptr ? *ptr : 0;
+
+	return sg_dwiter_read_buffer(miter);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
+
+static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
+{
+	size_t len, left = 4;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(miter->addr, addr, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return;
+		addr += len;
+		flush_kernel_dcache_page(miter->page);
+	} while (sg_dwiter_next(miter));
+}
+
+/**
+ * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
+ * @miter: sg mapping iterator used for writing
+ *
+ * Description:
+ *   Writes 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes which would be written
+ *   past the buffer's end are silently discarded. @miter@ is
+ *   advanced by 4 bytes or to the end of buffer whichever is closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ */
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
+		if (ptr)
+			*ptr = data;
+		else
+			return;
+	} else
+		sg_dwiter_write_slow(miter, data);
+
+	if (miter->length == miter->consumed)
+		flush_kernel_dcache_page(miter->page);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
+
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 89fec052f3b..9118613af32 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -48,6 +48,20 @@ config EEPROM_LEGACY
 	  This driver can also be built as a module.  If so, the module
 	  will be called eeprom.
 
+config EEPROM_MAX6875
+	tristate "Maxim MAX6874/5 power supply supervisor"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get read-only support for the user EEPROM of
+	  the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
+	  sequencer/supervisor.
+
+	  All other features of this chip should be accessed via i2c-dev.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max6875.
+
+
 config EEPROM_93CX6
 	tristate "EEPROM 93CX6 support"
 	help
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index 539dd8f8812..df3d68ffa9d 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_EEPROM_AT24)	+= at24.o
 obj-$(CONFIG_EEPROM_AT25)	+= at25.o
 obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
+obj-$(CONFIG_EEPROM_MAX6875)	+= max6875.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
diff --git a/drivers/i2c/chips/max6875.c b/drivers/misc/eeprom/max6875.c
index 033d9d81ec8..3c0c58eed34 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -3,7 +3,7 @@
 
     Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
 
-    Based on i2c/chips/eeprom.c
+    Based on eeprom.c
 
     The MAX6875 has a bank of registers and two banks of EEPROM.
     Address ranges are defined as follows:
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 6faefcffcb5..8d1c60a3f0d 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -450,7 +450,8 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			 "packet\n", sizeof(struct xpnet_pending_msg));
 
 		dev->stats.tx_errors++;
-		return -ENOMEM;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
 	}
 
 	/* get the beginning of the first cacheline and end of last */
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 98ffc41eaf2..adc205c49fb 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -147,7 +147,8 @@ struct mmc_blk_request {
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 {
 	int err;
-	__be32 blocks;
+	u32 result;
+	__be32 *blocks;
 
 	struct mmc_request mrq;
 	struct mmc_command cmd;
@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	mrq.cmd = &cmd;
 	mrq.data = &data;
 
-	sg_init_one(&sg, &blocks, 4);
+	blocks = kmalloc(4, GFP_KERNEL);
+	if (!blocks)
+		return (u32)-1;
+
+	sg_init_one(&sg, blocks, 4);
 
 	mmc_wait_for_req(card->host, &mrq);
 
+	result = ntohl(*blocks);
+	kfree(blocks);
+
 	if (cmd.error || data.error)
-		return (u32)-1;
+		result = (u32)-1;
 
-	return ntohl(blocks);
+	return result;
 }
 
 static u32 get_card_status(struct mmc_card *card, struct request *req)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 26491173275..d84c880fac8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host)
 	 */
 	mmc_delay(10);
 
-	host->ios.clock = host->f_min;
+	if (host->f_min > 400000) {
+		pr_warning("%s: Minimum clock frequency too high for "
+				"identification mode\n", mmc_hostname(host));
+		host->ios.clock = host->f_min;
+	} else
+		host->ios.clock = 400000;
+
 	host->ios.power_mode = MMC_POWER_ON;
 	mmc_set_ios(host);
 
@@ -855,61 +861,72 @@ void mmc_rescan(struct work_struct *work)
 
 	mmc_bus_get(host);
 
-	if (host->bus_ops == NULL) {
-		/*
-		 * Only we can add a new handler, so it's safe to
-		 * release the lock here.
-		 */
+	/* if there is a card registered, check whether it is still present */
+	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+		host->bus_ops->detect(host);
+
+	mmc_bus_put(host);
+
+
+	mmc_bus_get(host);
+
+	/* if there still is a card present, stop here */
+	if (host->bus_ops != NULL) {
 		mmc_bus_put(host);
+		goto out;
+	}
 
-		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
-			goto out;
+	/* detect a newly inserted card */
 
-		mmc_claim_host(host);
+	/*
+	 * Only we can add a new handler, so it's safe to
+	 * release the lock here.
+	 */
+	mmc_bus_put(host);
 
-		mmc_power_up(host);
-		mmc_go_idle(host);
+	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+		goto out;
 
-		mmc_send_if_cond(host, host->ocr_avail);
+	mmc_claim_host(host);
 
-		/*
-		 * First we search for SDIO...
-		 */
-		err = mmc_send_io_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sdio(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_power_up(host);
+	mmc_go_idle(host);
 
-		/*
-		 * ...then normal SD...
-		 */
-		err = mmc_send_app_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sd(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_send_if_cond(host, host->ocr_avail);
 
-		/*
-		 * ...and finally MMC.
-		 */
-		err = mmc_send_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_mmc(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	/*
+	 * First we search for SDIO...
+	 */
+	err = mmc_send_io_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sdio(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_release_host(host);
-		mmc_power_off(host);
-	} else {
-		if (host->bus_ops->detect && !host->bus_dead)
-			host->bus_ops->detect(host);
+	/*
+	 * ...then normal SD...
+	 */
+	err = mmc_send_app_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sd(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_bus_put(host);
+	/*
+	 * ...and finally MMC.
+	 */
+	err = mmc_send_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_mmc(host, ocr))
+			mmc_power_off(host);
+		goto out;
 	}
+
+	mmc_release_host(host);
+	mmc_power_off(host);
+
 out:
 	if (host->caps & MMC_CAP_NEEDS_POLL)
 		mmc_schedule_delayed_work(&host->detect, HZ);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691f3f6..40111a6d8d5 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -83,6 +83,17 @@ config MMC_SDHCI_OF
 
 	  If unsure, say N.
 
+config MMC_SDHCI_PLTFM
+	tristate "SDHCI support on the platform specific bus"
+	depends on MMC_SDHCI
+	help
+	  This selects the platform specific bus support for Secure Digital Host
+	  Controller Interface.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -155,7 +166,7 @@ config MMC_ATMELMCI_DMA
 
 config MMC_IMX
 	tristate "Motorola i.MX Multimedia Card Interface support"
-	depends on ARCH_IMX
+	depends on ARCH_MX1
 	help
 	  This selects the Motorola i.MX Multimedia card Interface.
 	  If you have a i.MX platform with a Multimedia Card slot,
@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS
 
 config MMC_TMIO
 	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-	depends on MFD_TMIO
+	depends on MFD_TMIO || MFD_ASIC3
 	help
 	  This provides support for the SD/MMC cell found in TC6393XB,
-	  T7L66XB and also ipaq ASIC3
+	  T7L66XB and also HTC ASIC3
+
+config MMC_CB710
+	tristate "ENE CB710 MMC/SD Interface support"
+	depends on PCI
+	select CB710_CORE
+	help
+	  This option enables support for MMC/SD part of ENE CB710/720 Flash
+	  memory card reader found in some laptops (ie. some versions of
+	  HP Compaq nx9500).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710-mmc.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 970a997620e..79da397c5fe 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -29,4 +30,8 @@ endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
 
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	CFLAGS-cb710-mmc	+= -DDEBUG
+endif
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index b58364ed6bb..fc8a0fe7c5c 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -7,6 +7,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
 #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
 #define __DRIVERS_MMC_ATMEL_MCI_H__
 
@@ -14,11 +20,17 @@
 #define MCI_CR			0x0000	/* Control */
 # define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
 # define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define MCI_CR_PWSEN		(  1 <<  2)	/* Power Save Enable */
+# define MCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
 # define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
 #define MCI_MR			0x0004	/* Mode */
 # define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
+# define MCI_MR_PWSDIV(x)	((x) <<  8)	/* Power Saving Divider */
 # define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
 # define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+# define MCI_MR_PDCFBYTE	(  1 << 13)	/* Force Byte Transfer */
+# define MCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
+# define MCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
 #define MCI_DTOR		0x0008	/* Data Timeout */
 # define MCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
 # define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
@@ -28,6 +40,7 @@
 # define MCI_SDCSEL_MASK	(  3 <<  0)
 # define MCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
 # define MCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
+# define MCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
 # define MCI_SDCBUS_MASK	(  3 <<  6)
 #define MCI_ARGR		0x0010	/* Command Argument */
 #define MCI_CMDR		0x0014	/* Command */
@@ -56,6 +69,9 @@
 #define MCI_BLKR		0x0018	/* Block */
 # define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
 # define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define MCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
+# define MCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
+# define MCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
 #define MCI_RSPR		0x0020	/* Response 0 */
 #define MCI_RSPR1		0x0024	/* Response 1 */
 #define MCI_RSPR2		0x0028	/* Response 2 */
@@ -83,7 +99,24 @@
 # define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
 # define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
 # define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
+#define MCI_DMA			0x0050	/* DMA Configuration[2] */
+# define MCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA Write Buffer Offset */
+# define MCI_DMA_CHKSIZE(x)	((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define MCI_DMAEN		(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+#define MCI_CFG			0x0054	/* Configuration[2] */
+# define MCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
+# define MCI_CFG_FERRCTRL_COR	(  1 <<  4)	/* Flow Error flag reset control mode */
+# define MCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
+# define MCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
+#define MCI_WPMR		0x00e4	/* Write Protection Mode[2] */
+# define MCI_WP_EN		(  1 <<  0)	/* WP Enable */
+# define MCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
+#define MCI_WPSR		0x00e8	/* Write Protection Status[2] */
+# define MCI_GET_WP_VS(x)	((x) & 0x0f)
+# define MCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
+#define MCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
 
+/* This is not including the FIFO Aperture on MCI2 */
 #define MCI_REGS_SIZE		0x100
 
 /* Register access macros */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index cf6a100bb38..7b603e4b41d 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -177,6 +177,7 @@ struct atmel_mci {
  *	available.
  * @wp_pin: GPIO pin used for card write protect sending, or negative
  *	if not available.
+ * @detect_is_active_high: The state of the detect pin when it is active.
  * @detect_timer: Timer used for debouncing @detect_pin interrupts.
  */
 struct atmel_mci_slot {
@@ -196,6 +197,7 @@ struct atmel_mci_slot {
 
 	int			detect_pin;
 	int			wp_pin;
+	bool			detect_is_active_high;
 
 	struct timer_list	detect_timer;
 };
@@ -924,7 +926,8 @@ static int atmci_get_cd(struct mmc_host *mmc)
 	struct atmel_mci_slot	*slot = mmc_priv(mmc);
 
 	if (gpio_is_valid(slot->detect_pin)) {
-		present = !gpio_get_value(slot->detect_pin);
+		present = !(gpio_get_value(slot->detect_pin) ^
+			    slot->detect_is_active_high);
 		dev_dbg(&mmc->class_dev, "card is %spresent\n",
 				present ? "" : "not ");
 	}
@@ -1028,7 +1031,8 @@ static void atmci_detect_change(unsigned long data)
 		return;
 
 	enable_irq(gpio_to_irq(slot->detect_pin));
-	present = !gpio_get_value(slot->detect_pin);
+	present = !(gpio_get_value(slot->detect_pin) ^
+		    slot->detect_is_active_high);
 	present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
 
 	dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
@@ -1456,6 +1460,7 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 	slot->host = host;
 	slot->detect_pin = slot_data->detect_pin;
 	slot->wp_pin = slot_data->wp_pin;
+	slot->detect_is_active_high = slot_data->detect_is_active_high;
 	slot->sdc_reg = sdc_reg;
 
 	mmc->ops = &atmci_ops;
@@ -1477,7 +1482,8 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 		if (gpio_request(slot->detect_pin, "mmc_detect")) {
 			dev_dbg(&mmc->class_dev, "no detect pin available\n");
 			slot->detect_pin = -EBUSY;
-		} else if (gpio_get_value(slot->detect_pin)) {
+		} else if (gpio_get_value(slot->detect_pin) ^
+				slot->detect_is_active_high) {
 			clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
 		}
 	}
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
new file mode 100644
index 00000000000..11efefb1af5
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -0,0 +1,804 @@
+/*
+ *  cb710/mmc.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/*	1, 2, 4, 8, 16, 32, 128, 512 */
+	0, 1, 2, 3,  4,  5,   7,   9
+};
+#define CB710_MAX_DIVIDER_IDX	\
+	(ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+	33, 10, 20, 25, 30, 35, 40, 45,
+	50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+	u32 src_freq_idx;
+	u32 divider_idx;
+	int src_hz;
+
+	/* this is magic, unverifiable for me, unless I get
+	 * MMC card with cables connected to bus signals */
+	pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+	src_freq_idx = (src_freq_idx >> 16) & 0xF;
+	src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+	for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+		if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+			break;
+	}
+
+	if (src_freq_idx)
+		divider_idx |= 0x8;
+
+	cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+	dev_dbg(cb710_slot_dev(slot),
+		"clock set to %d Hz, wanted %d Hz; flag = %d\n",
+		src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+		hz, (divider_idx & 8) != 0);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	/* clear global IE
+	 * - it gets set later if any interrupt sources are enabled */
+	mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+	/* look like interrupt is fired whenever
+	 * WORD[0x0C] & WORD[0x10] != 0;
+	 * -> bit 15 port 0x0C seems to be global interrupt enable
+	 */
+
+	enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+		& ~mask) | enable;
+
+	if (enable)
+		enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+	cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+	unsigned long flags;
+
+	spin_lock_irqsave(&reader->irq_lock, flags);
+	/* this is the only thing irq_lock protects */
+	__cb710_mmc_enable_irq(slot, enable, mask);
+	spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+	cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
+{
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_CARD_DETECTED;
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+	dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
+		enable ? 4 : 1, enable ? "s" : "");
+	if (enable)
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			CB710_MMC_C1_4BIT_DATA_BUS, 0);
+	else
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+	u16 status;
+
+	status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+	if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		/* it is just a guess, so log it */
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : ignoring bit 6 in status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+	}
+
+	if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : returning EIO on status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_RESET);
+		return -EIO;
+	}
+
+	/* 'what' is a bit in MMC_STATUS1 */
+	if ((status >> 8) & what) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+	int err = 0;
+	unsigned limit = 2000000;	/* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (!(err = cb710_check_event(slot, what))) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 2000000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+			limit, what, e, x);
+#endif
+	return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+	unsigned limit = 500000;	/* FIXME: real timeout */
+	int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 500000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+			limit, mask, e, x);
+#endif
+	return 0;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+	size_t count, size_t blocksize)
+{
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+		((count - 1) << 16)|(blocksize - 1));
+
+	dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
+		count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+	/* without this, received data is prepended with 8-bytes of zeroes */
+	u32 r1, r2;
+	int ok = 0;
+
+	r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+	    & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		ok = 1;
+	}
+
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: expected STATUS0 bit was %s\n",
+		ok ? "set." : "NOT SET!");
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+		r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+	struct sg_mapping_iter *miter, size_t dw_count)
+{
+	if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+		int err = cb710_wait_for_event(slot,
+			CB710_MMC_S1_PIO_TRANSFER_DONE);
+		if (err)
+			return err;
+	}
+
+	cb710_sg_dwiter_write_from_io(miter,
+		slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+	return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+	return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+	 * except single 8B block */
+	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	cb710_mmc_fifo_hack(slot);
+
+	while (blocks-- > 0) {
+		len = data->blksz;
+
+		while (len >= 16) {
+			err = cb710_mmc_receive_pio(slot, &miter, 4);
+			if (err)
+				goto out;
+			len -= 16;
+		}
+
+		if (!len)
+			continue;
+
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+			len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+		len = (len >= 8) ? 4 : 2;
+		err = cb710_mmc_receive_pio(slot, &miter, len);
+		if (err)
+			goto out;
+	}
+out:
+	cb710_sg_miter_stop_writing(&miter);
+	return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles multiple
+	 * non-16B-boundary blocks */
+	if (unlikely(data->blocks > 1 && data->blksz & 15))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	while (blocks-- > 0) {
+		len = (data->blksz + 15) >> 4;
+		do {
+			if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+			    & CB710_MMC_S2_FIFO_EMPTY)) {
+				err = cb710_wait_for_event(slot,
+					CB710_MMC_S1_PIO_TRANSFER_DONE);
+				if (err)
+					goto out;
+			}
+			cb710_sg_dwiter_read_to_io(&miter,
+				slot->iobase + CB710_MMC_DATA_PORT, 4);
+		} while (--len);
+	}
+out:
+	sg_miter_stop(&miter);
+	return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+	struct mmc_command *cmd)
+{
+	unsigned int flags = cmd->flags;
+	u16 cb_flags = 0;
+
+	/* Windows driver returned 0 for commands for which no response
+	 * is expected. It happened that there were only two such commands
+	 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+	 * as well be a bug in that driver.
+	 *
+	 * Original driver set bit 14 for MMC/SD application
+	 * commands. There's no difference 'on the wire' and
+	 * it apparently works without it anyway.
+	 */
+
+	switch (flags & MMC_CMD_MASK) {
+	case MMC_CMD_AC:	cb_flags = CB710_MMC_CMD_AC;	break;
+	case MMC_CMD_ADTC:	cb_flags = CB710_MMC_CMD_ADTC;	break;
+	case MMC_CMD_BC:	cb_flags = CB710_MMC_CMD_BC;	break;
+	case MMC_CMD_BCR:	cb_flags = CB710_MMC_CMD_BCR;	break;
+	}
+
+	if (flags & MMC_RSP_BUSY)
+		cb_flags |= CB710_MMC_RSP_BUSY;
+
+	cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		cb_flags |= CB710_MMC_DATA_READ;
+
+	if (flags & MMC_RSP_PRESENT) {
+		/* Windows driver set 01 at bits 4,3 except for
+		 * MMC_SET_BLOCKLEN where it set 10. Maybe the
+		 * hardware can do something special about this
+		 * command? The original driver looks buggy/incomplete
+		 * anyway so we ignore this for now.
+		 *
+		 * I assume that 00 here means no response is expected.
+		 */
+		cb_flags |= CB710_MMC_RSP_PRESENT;
+
+		if (flags & MMC_RSP_136)
+			cb_flags |= CB710_MMC_RSP_136;
+		if (!(flags & MMC_RSP_CRC))
+			cb_flags |= CB710_MMC_RSP_NO_CRC;
+	}
+
+	return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+	struct mmc_command *cmd)
+{
+	unsigned rsp_opcode, wanted_opcode;
+
+	/* Looks like final byte with CRC is always stripped (same as SDHCI) */
+	if (cmd->flags & MMC_RSP_136) {
+		u32 resp[4];
+
+		resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+		resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+		resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+		resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+		rsp_opcode = resp[0] >> 24;
+
+		cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+		cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+		cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+		cmd->resp[3] = (resp[3] << 8);
+	} else {
+		rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+		cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+	}
+
+	wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+	if (rsp_opcode != wanted_opcode)
+		cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+	struct mmc_data *data)
+{
+	int error, to;
+
+	if (data->flags & MMC_DATA_READ)
+		error = cb710_mmc_receive(slot, data);
+	else
+		error = cb710_mmc_send(slot, data);
+
+	to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+	if (!error)
+		error = to;
+
+	if (!error)
+		data->bytes_xfered = data->blksz * data->blocks;
+	return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_data *data = cmd->data;
+
+	u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+	dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+	if (data) {
+		if (!cb710_is_transfer_size_supported(data)) {
+			data->error = -EINVAL;
+			return -1;
+		}
+		cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+	}
+
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+	cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+	cb710_mmc_reset_events(slot);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+	cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+	if (cmd->error)
+		return -1;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cb710_receive_response(slot, cmd);
+		if (cmd->error)
+			return -1;
+	}
+
+	if (data)
+		data->error = cb710_mmc_transfer_data(slot, data);
+	return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	WARN_ON(reader->mrq != NULL);
+
+	reader->mrq = mrq;
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+	if (cb710_mmc_is_card_inserted(slot)) {
+		if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+			cb710_mmc_command(mmc, mrq->stop);
+		mdelay(1);
+	} else {
+		mrq->cmd->error = -ENOMEDIUM;
+	}
+
+	tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+	int err;
+
+	/* a lot of magic; see comment in cb710_mmc_set_clock() */
+	dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(2);
+	dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	/* This port behaves weird: quick byte reads of 0x08,0x09 return
+	 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+	 * read/written from userspace...  What am I missing here?
+	 * (it doesn't depend on write-to-read delay) */
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+	return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	int err;
+
+	cb710_mmc_set_clock(mmc, ios->clock);
+
+	if (!cb710_mmc_is_card_inserted(slot)) {
+		dev_dbg(cb710_slot_dev(slot),
+			"no card inserted - ignoring bus powerup request\n");
+		ios->power_mode = MMC_POWER_OFF;
+	}
+
+	if (ios->power_mode != reader->last_power_mode)
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		err = cb710_mmc_powerup(slot);
+		if (err) {
+			dev_warn(cb710_slot_dev(slot),
+				"powerup failed (%d)- retrying\n", err);
+			cb710_mmc_powerdown(slot);
+			udelay(1);
+			err = cb710_mmc_powerup(slot);
+			if (err)
+				dev_warn(cb710_slot_dev(slot),
+					"powerup retry failed (%d) - expect errors\n",
+					err);
+		}
+		reader->last_power_mode = MMC_POWER_ON;
+		break;
+	case MMC_POWER_OFF:
+		cb710_mmc_powerdown(slot);
+		reader->last_power_mode = MMC_POWER_OFF;
+		break;
+	case MMC_POWER_UP:
+	default:
+		/* ignore */;
+	}
+
+	cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	u32 status, config1, config2, irqen;
+
+	status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+	irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+	config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+	config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+	dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+		"ie: %08X, c2: %08X, c1: %08X\n",
+		status, irqen, config2, config1);
+
+	if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+		/* ack the event */
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_CARD_CHANGED);
+		if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+		    == CB710_MMC_IE_CISTATUS_MASK)
+			mmc_detect_change(mmc, HZ/5);
+	} else {
+		dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+		spin_lock(&reader->irq_lock);
+		__cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+		spin_unlock(&reader->irq_lock);
+	}
+
+	return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+	struct mmc_host *mmc = (void *)data;
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_request *mrq = reader->mrq;
+
+	reader->mrq = NULL;
+	mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+	.request = cb710_mmc_request,
+	.set_ios = cb710_mmc_set_ios,
+	.get_ro = cb710_mmc_get_ro
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	int err;
+
+	err = mmc_suspend_host(mmc, state);
+	if (err)
+		return err;
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+
+	return mmc_resume_host(mmc);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_mmc_init(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	struct mmc_host *mmc;
+	struct cb710_mmc_reader *reader;
+	int err;
+	u32 val;
+
+	mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+	if (!mmc)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, mmc);
+
+	/* harmless (maybe) magic */
+	pci_read_config_dword(chip->pdev, 0x48, &val);
+	val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+	dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+	val *= 1000000;
+
+	mmc->ops = &cb710_mmc_host;
+	mmc->f_max = val;
+	mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+	mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	reader = mmc_priv(mmc);
+
+	tasklet_init(&reader->finish_req_tasklet,
+		cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+	spin_lock_init(&reader->irq_lock);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+	err = mmc_add_host(mmc);
+	if (unlikely(err))
+		goto err_free_mmc;
+
+	dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+		mmc_hostname(mmc));
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+	return 0;
+
+err_free_mmc:
+	dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+	mmc_free_host(mmc);
+	return err;
+}
+
+static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+	mmc_remove_host(mmc);
+
+	/* IRQs should be disabled now, but let's stay on the safe side */
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, NULL);
+
+	/* clear config ports - just in case */
+	cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+	tasklet_kill(&reader->finish_req_tasklet);
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+	.driver.name = "cb710-mmc",
+	.probe = cb710_mmc_init,
+	.remove = __devexit_p(cb710_mmc_exit),
+#ifdef CONFIG_PM
+	.suspend = cb710_mmc_suspend,
+	.resume = cb710_mmc_resume,
+#endif
+};
+
+static int __init cb710_mmc_init_module(void)
+{
+	return platform_driver_register(&cb710_mmc_driver);
+}
+
+static void __exit cb710_mmc_cleanup_module(void)
+{
+	platform_driver_unregister(&cb710_mmc_driver);
+}
+
+module_init(cb710_mmc_init_module);
+module_exit(cb710_mmc_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");
diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h
new file mode 100644
index 00000000000..e845c776bdd
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.h
@@ -0,0 +1,104 @@
+/*
+ *  cb710/cb710-mmc.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+	struct tasklet_struct finish_req_tasklet;
+	struct mmc_request *mrq;
+	spinlock_t irq_lock;
+	unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(&slot->pdev.dev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = container_of(mmc_dev(mmc),
+		struct platform_device, dev);
+	return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT		0x00
+
+#define CB710_MMC_CONFIG_PORT		0x04
+#define CB710_MMC_CONFIG0_PORT		0x04
+#define CB710_MMC_CONFIG1_PORT		0x05
+#define   CB710_MMC_C1_4BIT_DATA_BUS		0x40
+#define CB710_MMC_CONFIG2_PORT		0x06
+#define   CB710_MMC_C2_READ_PIO_SIZE_MASK	0x0F	/* N-1 */
+#define CB710_MMC_CONFIG3_PORT		0x07
+
+#define CB710_MMC_CONFIGB_PORT		0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT	0x0C
+#define   CB710_MMC_IE_TEST_MASK		0x00BF
+#define   CB710_MMC_IE_CARD_INSERTION_STATUS	0x1000
+#define   CB710_MMC_IE_IRQ_ENABLE		0x8000
+#define   CB710_MMC_IE_CISTATUS_MASK		\
+		(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT		0x10
+#define   CB710_MMC_STATUS_ERROR_EVENTS		0x60FF
+#define CB710_MMC_STATUS0_PORT		0x10
+#define   CB710_MMC_S0_FIFO_UNDERFLOW		0x40
+#define CB710_MMC_STATUS1_PORT		0x11
+#define   CB710_MMC_S1_COMMAND_SENT		0x01
+#define   CB710_MMC_S1_DATA_TRANSFER_DONE	0x02
+#define   CB710_MMC_S1_PIO_TRANSFER_DONE	0x04
+#define   CB710_MMC_S1_CARD_CHANGED		0x10
+#define   CB710_MMC_S1_RESET			0x20
+#define CB710_MMC_STATUS2_PORT		0x12
+#define   CB710_MMC_S2_FIFO_READY		0x01
+#define   CB710_MMC_S2_FIFO_EMPTY		0x02
+#define   CB710_MMC_S2_BUSY_10			0x10
+#define   CB710_MMC_S2_BUSY_20			0x20
+#define CB710_MMC_STATUS3_PORT		0x13
+#define   CB710_MMC_S3_CARD_DETECTED		0x02
+#define   CB710_MMC_S3_WRITE_PROTECTED		0x04
+
+#define CB710_MMC_CMD_TYPE_PORT		0x14
+#define   CB710_MMC_RSP_TYPE_MASK		0x0007
+#define     CB710_MMC_RSP_R1			(0)
+#define     CB710_MMC_RSP_136			(5)
+#define     CB710_MMC_RSP_NO_CRC		(2)
+#define   CB710_MMC_RSP_PRESENT_MASK		0x0018
+#define     CB710_MMC_RSP_NONE			(0 << 3)
+#define     CB710_MMC_RSP_PRESENT		(1 << 3)
+#define     CB710_MMC_RSP_PRESENT_X		(2 << 3)
+#define   CB710_MMC_CMD_TYPE_MASK		0x0060
+#define     CB710_MMC_CMD_BC			(0 << 5)
+#define     CB710_MMC_CMD_BCR			(1 << 5)
+#define     CB710_MMC_CMD_AC			(2 << 5)
+#define     CB710_MMC_CMD_ADTC			(3 << 5)
+#define   CB710_MMC_DATA_READ			0x0080
+#define   CB710_MMC_CMD_CODE_MASK		0x3F00
+#define   CB710_MMC_CMD_CODE_SHIFT		8
+#define   CB710_MMC_IS_APP_CMD			0x4000
+#define   CB710_MMC_RSP_BUSY			0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT	0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT	0x1C
+#define CB710_MMC_RESPONSE0_PORT	0x20
+#define CB710_MMC_RESPONSE1_PORT	0x24
+#define CB710_MMC_RESPONSE2_PORT	0x28
+#define CB710_MMC_RESPONSE3_PORT	0x2C
+
+#endif /* LINUX_CB710_MMC_H */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index f48349d18c9..240608cc7ae 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -97,6 +97,14 @@
  */
 #define r1b_timeout		(HZ * 3)
 
+/* One of the critical speed parameters is the amount of data which may
+ * be transfered in one command. If this value is too low, the SD card
+ * controller has to do multiple partial block writes (argggh!). With
+ * today (2008) SD cards there is little speed gain if we transfer more
+ * than 64 KBytes at a time. So use this value until there is any indication
+ * that we should do more here.
+ */
+#define MMC_SPI_BLOCKSATONCE	128
 
 /****************************************************************************/
 
@@ -327,15 +335,16 @@ checkstatus:
 
 	/* Status byte: the entire seven-bit R1 response.  */
 	if (cmd->resp[0] != 0) {
-		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
-				      | R1_SPI_ILLEGAL_COMMAND)
+		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS)
 				& cmd->resp[0])
-			value = -EINVAL;
+			value = -EFAULT; /* Bad address */
+		else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0])
+			value = -ENOSYS; /* Function not implemented */
 		else if (R1_SPI_COM_CRC & cmd->resp[0])
-			value = -EILSEQ;
+			value = -EILSEQ; /* Illegal byte sequence */
 		else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
 				& cmd->resp[0])
-			value = -EIO;
+			value = -EIO;    /* I/O error */
 		/* else R1_SPI_IDLE, "it's resetting" */
 	}
 
@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi)
 
 	mmc->ops = &mmc_spi_ops;
 	mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
+	mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
+	mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
 
 	mmc->caps = MMC_CAP_SPI;
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7d4febdab28..e1aa8471ab1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		host->mclk = clk_get_rate(host->clk);
 		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
 	}
-	host->base = ioremap(dev->res.start, SZ_4K);
+	host->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!host->base) {
 		ret = -ENOMEM;
 		goto clk_disable;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f4cbe473670..bc14bb1b057 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev)
 	}
 
 	mmc->f_min = clk_get_rate(host->clk) >> 16;
-	if (mmc->f_min < 400000)
-		mmc->f_min = 400000;
 	mmc->f_max = clk_get_rate(host->clk) >> 1;
 
 	/* recommended in data sheet */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index dceb5ee3bda..e7a331de573 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver mmc_omap_driver = {
-	.probe		= mmc_omap_probe,
 	.remove		= mmc_omap_remove,
 	.suspend	= mmc_omap_suspend,
 	.resume		= mmc_omap_resume,
@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = {
 
 static int __init mmc_omap_init(void)
 {
-	return platform_driver_register(&mmc_omap_driver);
+	return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
 }
 
 static void __exit mmc_omap_exit(void)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index c40cb96255a..1cf9cfb3b64 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
-	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
 
 	if (pdata->slots[host->slot_id].wires >= 8)
@@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
+	/* initialize power supplies, gpios, etc */
 	if (pdata->init != NULL) {
 		if (pdata->init(&pdev->dev) != 0) {
-			dev_dbg(mmc_dev(host->mmc),
-				"Unable to configure MMC IRQs\n");
+			dev_dbg(mmc_dev(host->mmc), "late init error\n");
 			goto err_irq_cd_init;
 		}
 	}
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 
 	/* Request IRQ for card detect */
 	if ((mmc_slot(host).card_detect_irq)) {
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 430095725f9..d7d7109ef47 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -27,6 +27,7 @@
 #include <linux/err.h>
 #include <linux/mmc/host.h>
 #include <linux/io.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/sizes.h>
 
@@ -67,8 +68,42 @@ struct pxamci_host {
 	unsigned int		dma_dir;
 	unsigned int		dma_drcmrrx;
 	unsigned int		dma_drcmrtx;
+
+	struct regulator	*vcc;
 };
 
+static inline void pxamci_init_ocr(struct pxamci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+		if (host->pdata && host->pdata->ocr_mask)
+			dev_warn(mmc_dev(host->mmc),
+				"ocr_mask/setpower will not be used\n");
+	}
+#endif
+	if (host->vcc == NULL) {
+		/* fall-back to platform data */
+		host->mmc->ocr_avail = host->pdata ?
+			host->pdata->ocr_mask :
+			MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+}
+
+static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
+{
+#ifdef CONFIG_REGULATOR
+	if (host->vcc)
+		mmc_regulator_set_ocr(host->vcc, vdd);
+#endif
+	if (!host->vcc && host->pdata && host->pdata->setpower)
+		host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->power_mode != ios->power_mode) {
 		host->power_mode = ios->power_mode;
 
-		if (host->pdata && host->pdata->setpower)
-			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		pxamci_set_power(host, ios->vdd);
 
 		if (ios->power_mode == MMC_POWER_ON)
 			host->cmdat |= CMDAT_INIT;
@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev)
 	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
 							  : host->clkrate;
 
-	mmc->ocr_avail = host->pdata ?
-			 host->pdata->ocr_mask :
-			 MMC_VDD_32_33|MMC_VDD_33_34;
+	pxamci_init_ocr(host);
+
 	mmc->caps = 0;
 	host->cmdat = 0;
 	if (!cpu_is_pxa25x()) {
@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev)
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		if (host->vcc)
+			regulator_put(host->vcc);
+
 		if (host->pdata && host->pdata->exit)
 			host->pdata->exit(&pdev->dev, mmc);
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b7096..4eb4f37544a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -789,7 +790,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 
 	last_source = source;
 
-	s3c2410_dma_devconfig(host->dma, source, 3,
+	s3c2410_dma_devconfig(host->dma, source,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 	default:
 		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
new file mode 100644
index 00000000000..297f40ae6ad
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -0,0 +1,168 @@
+/*
+ * sdhci-pltfm.c Support for SDHCI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform devices
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/io.h>
+
+#include "sdhci.h"
+
+/*****************************************************************************\
+ *                                                                           *
+ * SDHCI core callbacks                                                      *
+ *                                                                           *
+\*****************************************************************************/
+
+static struct sdhci_ops sdhci_pltfm_ops = {
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct resource *iomem;
+	int ret;
+
+	BUG_ON(pdev == NULL);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (resource_size(iomem) != 0x100)
+		dev_err(&pdev->dev, "Invalid iomem size. You may "
+			"experience problems.\n");
+
+	if (pdev->dev.parent)
+		host = sdhci_alloc_host(pdev->dev.parent, 0);
+	else
+		host = sdhci_alloc_host(&pdev->dev, 0);
+
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto err;
+	}
+
+	host->hw_name = "platform";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+
+	if (!request_mem_region(iomem->start, resource_size(iomem),
+		mmc_hostname(host->mmc))) {
+		dev_err(&pdev->dev, "cannot request region\n");
+		ret = -EBUSY;
+		goto err_request;
+	}
+
+	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+	if (!host->ioaddr) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
+		goto err_remap;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+err_add_host:
+	iounmap(host->ioaddr);
+err_remap:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+	sdhci_free_host(host);
+err:
+	printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret);
+	return ret;
+}
+
+static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int dead;
+	u32 scratch;
+
+	dead = 0;
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(host, dead);
+	iounmap(host->ioaddr);
+	release_mem_region(iomem->start, resource_size(iomem));
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_pltfm_driver = {
+	.driver = {
+		.name	= "sdhci",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sdhci_pltfm_probe,
+	.remove		= __devexit_p(sdhci_pltfm_remove),
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+	return platform_driver_register(&sdhci_pltfm_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+	platform_driver_unregister(&sdhci_pltfm_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci");
+
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2226e..35789c6edc1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
 		sdhci_readl(host, SDHCI_CAPABILITIES),
 		sdhci_readl(host, SDHCI_MAX_CURRENT));
 
+	if (host->flags & SDHCI_USE_ADMA)
+		printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+		       readl(host->ioaddr + SDHCI_ADMA_ERROR),
+		       readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
 	printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
 }
 
@@ -1005,12 +1010,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr;
 
-	if (host->power == power)
+	if (power == (unsigned short)-1)
+		pwr = 0;
+	else {
+		switch (1 << power) {
+		case MMC_VDD_165_195:
+			pwr = SDHCI_POWER_180;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			pwr = SDHCI_POWER_300;
+			break;
+		case MMC_VDD_32_33:
+		case MMC_VDD_33_34:
+			pwr = SDHCI_POWER_330;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	if (host->pwr == pwr)
 		return;
 
-	if (power == (unsigned short)-1) {
+	host->pwr = pwr;
+
+	if (pwr == 0) {
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-		goto out;
+		return;
 	}
 
 	/*
@@ -1020,35 +1047,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	pwr = SDHCI_POWER_ON;
-
-	switch (1 << power) {
-	case MMC_VDD_165_195:
-		pwr |= SDHCI_POWER_180;
-		break;
-	case MMC_VDD_29_30:
-	case MMC_VDD_30_31:
-		pwr |= SDHCI_POWER_300;
-		break;
-	case MMC_VDD_32_33:
-	case MMC_VDD_33_34:
-		pwr |= SDHCI_POWER_330;
-		break;
-	default:
-		BUG();
-	}
-
 	/*
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
 	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
-		sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+	pwr |= SDHCI_POWER_ON;
 
-out:
-	host->power = power;
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 }
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 65c6f996bbd..2de08349c3c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -255,7 +255,7 @@ struct sdhci_host {
 	unsigned int		timeout_clk;	/* Timeout freq (KHz) */
 
 	unsigned int		clock;		/* Current clock (MHz) */
-	unsigned short		power;		/* Current voltage */
+	u8			pwr;		/* Current voltage */
 
 	struct mmc_request	*mrq;		/* Current request */
 	struct mmc_command	*cmd;		/* Current command */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 63fbd5b7d31..91991b460c4 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -10,7 +10,7 @@
  *
  * Driver for the MMC / SD / SDIO cell found in:
  *
- * TC6393XB TC6391XB TC6387XB T7L66XB
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
  *
  * This driver draws mainly on scattered spec sheets, Reverse engineering
  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
@@ -35,69 +35,47 @@
 
 #include "tmio_mmc.h"
 
-/*
- * Fixme - documentation conflicts on what the clock values are for the
- * various dividers.
- * One document I have says that its a divisor of a 24MHz clock, another 33.
- * This probably depends on HCLK for a given platform, so we may need to
- * require HCLK be passed to us from the MFD core.
- *
- */
-
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 {
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 	u32 clk = 0, clock;
 
 	if (new_clock) {
-		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+		for (clock = host->mmc->f_min, clk = 0x80000080;
+			new_clock >= (clock<<1); clk >>= 1)
 			clock <<= 1;
-			clk >>= 1;
-		}
-		if (clk & 0x1)
-			clk = 0x20000;
-
-		clk >>= 2;
-		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
 		clk |= 0x100;
 	}
 
-	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+	sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
 }
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
 	msleep(10);
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
 }
 
 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
-	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
 	msleep(10);
 }
 
 static void reset(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
 	/* FIXME - should we set stop clock reg here */
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	msleep(10);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
 	msleep(10);
 }
 
@@ -129,13 +107,12 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host)
 static int
 tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	int c = cmd->opcode;
 
 	/* Command 12 is handled by hardware */
 	if (cmd->opcode == 12 && !cmd->arg) {
-		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
 		return 0;
 	}
 
@@ -160,18 +137,18 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 	if (data) {
 		c |= DATA_PRESENT;
 		if (data->blocks > 1) {
-			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
 			c |= TRANSFER_MULTI;
 		}
 		if (data->flags & MMC_DATA_READ)
 			c |= TRANSFER_READ;
 	}
 
-	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+	enable_mmc_irqs(host, TMIO_MASK_CMD);
 
 	/* Fire off the command */
-	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
-	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+	sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
+	sd_ctrl_write16(host, CTL_SD_CMD, c);
 
 	return 0;
 }
@@ -183,7 +160,6 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
  */
 static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	unsigned short *buf;
 	unsigned int count;
@@ -206,9 +182,9 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 	/* Transfer the data */
 	if (data->flags & MMC_DATA_READ)
-		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 	else
-		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 
 	host->sg_off += count;
 
@@ -222,7 +198,6 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	struct mmc_command *stop;
 
@@ -251,13 +226,13 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 	 */
 
 	if (data->flags & MMC_DATA_READ)
-		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		disable_mmc_irqs(host, TMIO_MASK_READOP);
 	else
-		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+		disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 
 	if (stop) {
 		if (stop->opcode == 12 && !stop->arg)
-			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
 		else
 			BUG();
 	}
@@ -268,9 +243,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	unsigned int stat)
 {
-	void __iomem *ctl = host->ctl, *addr;
 	struct mmc_command *cmd = host->cmd;
-	int i;
+	int i, addr;
 
 	if (!host->cmd) {
 		pr_debug("Spurious CMD irq\n");
@@ -284,8 +258,8 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 * modify the order of the response for short response command types.
 	 */
 
-	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
-		cmd->resp[i] = tmio_ioread32(addr);
+	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = sd_ctrl_read32(host, addr);
 
 	if (cmd->flags &  MMC_RSP_136) {
 		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
@@ -307,9 +281,9 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 */
 	if (host->data && !cmd->error) {
 		if (host->data->flags & MMC_DATA_READ)
-			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+			enable_mmc_irqs(host, TMIO_MASK_READOP);
 		else
-			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+			enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 	} else {
 		tmio_mmc_finish_request(host);
 	}
@@ -321,20 +295,19 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 {
 	struct tmio_mmc_host *host = devid;
-	void __iomem *ctl = host->ctl;
 	unsigned int ireg, irq_mask, status;
 
 	pr_debug("MMC IRQ begin\n");
 
-	status = tmio_ioread32(ctl + CTL_STATUS);
-	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	status = sd_ctrl_read32(host, CTL_STATUS);
+	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 	pr_debug_status(status);
 	pr_debug_status(ireg);
 
 	if (!ireg) {
-		disable_mmc_irqs(ctl, status & ~irq_mask);
+		disable_mmc_irqs(host, status & ~irq_mask);
 
 		pr_debug("tmio_mmc: Spurious irq, disabling! "
 			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
@@ -346,7 +319,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	while (ireg) {
 		/* Card insert / remove attempts */
 		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+			ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
 				TMIO_STAT_CARD_REMOVE);
 			mmc_detect_change(host->mmc, 0);
 		}
@@ -358,25 +331,25 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 
 		/* Command completion */
 		if (ireg & TMIO_MASK_CMD) {
-			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			ack_mmc_irqs(host, TMIO_MASK_CMD);
 			tmio_mmc_cmd_irq(host, status);
 		}
 
 		/* Data transfer */
 		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
 			tmio_mmc_pio_irq(host);
 		}
 
 		/* Data transfer completion */
 		if (ireg & TMIO_STAT_DATAEND) {
-			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			ack_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tmio_mmc_data_irq(host);
 		}
 
 		/* Check status - keep going until we've handled it all */
-		status = tmio_ioread32(ctl + CTL_STATUS);
-		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		status = sd_ctrl_read32(host, CTL_STATUS);
+		irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 		pr_debug("Status at end of loop: %08x\n", status);
@@ -391,8 +364,6 @@ out:
 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	struct mmc_data *data)
 {
-	void __iomem *ctl = host->ctl;
-
 	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
 	    data->blksz, data->blocks);
 
@@ -407,8 +378,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	host->data = data;
 
 	/* Set transfer length / blocksize */
-	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
-	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
 
 	return 0;
 }
@@ -449,8 +420,6 @@ fail:
 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 
 	if (ios->clock)
 		tmio_mmc_set_clock(host, ios->clock);
@@ -458,12 +427,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	/* Power sequence - OFF -> ON -> UP */
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF: /* power down SD bus */
-		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 		tmio_mmc_clk_stop(host);
 		break;
 	case MMC_POWER_ON: /* power up SD bus */
 
-		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
 		break;
 	case MMC_POWER_UP: /* start bus clock */
 		tmio_mmc_clk_start(host);
@@ -472,10 +441,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
-		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
 	break;
 	case MMC_BUS_WIDTH_4:
-		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
 	break;
 	}
 
@@ -486,9 +455,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 static int tmio_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *ctl = host->ctl;
 
-	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+	return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
 }
 
 static struct mmc_host_ops tmio_mmc_ops = {
@@ -518,13 +486,8 @@ static int tmio_mmc_resume(struct platform_device *dev)
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
 	struct mmc_host *mmc = platform_get_drvdata(dev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
 	int ret = 0;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -532,6 +495,11 @@ static int tmio_mmc_resume(struct platform_device *dev)
 			goto out;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	mmc_resume_host(mmc);
 
 out:
@@ -545,20 +513,25 @@ out:
 static int __devinit tmio_mmc_probe(struct platform_device *dev)
 {
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_mmc_data *pdata;
 	struct resource *res_ctl, *res_cnf;
 	struct tmio_mmc_host *host;
 	struct mmc_host *mmc;
-	int ret = -ENOMEM;
+	int ret = -EINVAL;
 
 	if (dev->num_resources != 3)
 		goto out;
 
 	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (!res_ctl || !res_cnf) {
-		ret = -EINVAL;
+	if (!res_ctl || !res_cnf)
 		goto out;
-	}
+
+	pdata = cell->driver_data;
+	if (!pdata || !pdata->hclk)
+		goto out;
+
+	ret = -ENOMEM;
 
 	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
 	if (!mmc)
@@ -568,6 +541,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	host->mmc = mmc;
 	platform_set_drvdata(dev, mmc);
 
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res_ctl) >> 10;
+
 	host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
 	if (!host->ctl)
 		goto host_free;
@@ -578,15 +554,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps = MMC_CAP_4_BIT_DATA;
-	mmc->f_min = 46875; /* 24000000 / 512 */
-	mmc->f_max = 24000000;
+	mmc->f_max = pdata->hclk;
+	mmc->f_min = mmc->f_max / 512;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe,
-		host->cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -594,14 +565,19 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 			goto unmap_cnf;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	/* Disable SD power during suspend */
-	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+	sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
 
 	/* The below is required but why? FIXME */
-	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+	sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
 
 	/* Power down SD bus*/
-	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+	sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 
 	tmio_mmc_clk_stop(host);
 	reset(host);
@@ -612,22 +588,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	else
 		goto unmap_cnf;
 
-	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+	disable_mmc_irqs(host, TMIO_MASK_ALL);
 
-	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
-		host);
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
+		IRQF_TRIGGER_FALLING, "tmio-mmc", host);
 	if (ret)
 		goto unmap_cnf;
 
-	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
-
 	mmc_add_host(mmc);
 
 	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
 	       (unsigned long)host->ctl, host->irq);
 
 	/* Unmask the IRQs we want to know about */
-	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+	enable_mmc_irqs(host, TMIO_MASK_IRQ);
 
 	return 0;
 
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9c831ab2ece..9fa99859497 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -83,34 +83,36 @@
 		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
 #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
 
-#define enable_mmc_irqs(ctl, i) \
+
+#define enable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define disable_mmc_irqs(ctl, i) \
+#define disable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask |= ((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define ack_mmc_irqs(ctl, i) \
+#define ack_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask  = sd_ctrl_read32((host), CTL_STATUS); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+		sd_ctrl_write32((host), CTL_STATUS, mask); \
 	} while (0)
 
 
 struct tmio_mmc_host {
 	void __iomem *cnf;
 	void __iomem *ctl;
+	unsigned long bus_shift;
 	struct mmc_command      *cmd;
 	struct mmc_request      *mrq;
 	struct mmc_data         *data;
@@ -123,6 +125,63 @@ struct tmio_mmc_host {
 	unsigned int            sg_off;
 };
 
+#include <linux/io.h>
+
+static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	readsw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	writesw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
+		u8 val)
+{
+	writeb(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+	writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
+}
+
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 7d04fb9ddca..b8e35a0b4d7 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -154,7 +154,8 @@ config MTD_AFS_PARTS
 
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically. The
-	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+	  'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
+	  example.
 
 config MTD_OF_PARTS
 	tristate "Flash partition map based on OF description"
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6fde0a2e356..325fab92a62 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,7 +49,7 @@ config MTD_MS02NV
 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called ms02-nv.ko.
+	  The module will be called ms02-nv.
 
 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 890936d0275..f3276897859 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
 	help
           This enables the driver for the NAND flash device found on the
           Basler eXcite Smart Camera. If built as a module, the driver
-          will be named "excite_nandflash.ko".
+          will be named excite_nandflash.
 
 config MTD_NAND_CAFE
 	tristate "NAND support for OLPC CAFÉ chip"
@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
 	  controller is enabled for NAND, and currently requires that
 	  the controller be in MMIO mode.
 
-	  If you say "m", the module will be called "cs553x_nand.ko".
+	  If you say "m", the module will be called cs553x_nand.
 
 config MTD_NAND_ATMEL
 	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f2e9de1414d..6391e3dc800 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,6 @@
 #include <mach/gpmc.h>
 #include <mach/onenand.h>
 #include <mach/gpio.h>
-#include <mach/pm.h>
 
 #include <mach/dma.h>
 
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 1c5344aa57c..367bec63620 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -281,7 +281,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 		autoirq = probe_irq_off(irq_mask);
 
 		if (autoirq == 0) {
-			printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",
+			pr_warning("%s probe at %#x failed to detect IRQ line.\n",
 				mname, ioaddr);
 			release_region(ioaddr, EL1_IO_EXTENT);
 			return -EAGAIN;
@@ -297,16 +297,16 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 	if (autoirq)
 		dev->irq = autoirq;
 
-	printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
+	pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
 			dev->name, mname, dev->base_addr,
 			autoirq ? "auto":"assigned ", dev->irq);
 
 #ifdef CONFIG_IP_MULTICAST
-	printk(KERN_WARNING "WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
+	pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
 #endif
 
 	if (el_debug)
-		printk(KERN_DEBUG "%s", version);
+		pr_debug("%s", version);
 
 	lp = netdev_priv(dev);
 	memset(lp, 0, sizeof(struct net_local));
@@ -343,7 +343,7 @@ static int el_open(struct net_device *dev)
 	unsigned long flags;
 
 	if (el_debug > 2)
-		printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);
+		pr_debug("%s: Doing el_open()...\n", dev->name);
 
 	retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);
 	if (retval)
@@ -374,7 +374,7 @@ static void el_timeout(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug)
-		printk(KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
+		pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
 			dev->name, inb(TX_STATUS),
 			inb(AX_STATUS), inb(RX_STATUS));
 	dev->stats.tx_errors++;
@@ -483,14 +483,13 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			lp->loading = 0;
 			dev->trans_start = jiffies;
 			if (el_debug > 2)
-				printk(KERN_DEBUG " queued xmit.\n");
+				pr_debug(" queued xmit.\n");
 			dev_kfree_skb(skb);
 			return 0;
 		}
 		/* A receive upset our load, despite our best efforts */
 		if (el_debug > 2)
-			printk(KERN_DEBUG "%s: burped during tx load.\n",
-				dev->name);
+			pr_debug("%s: burped during tx load.\n", dev->name);
 		spin_lock_irqsave(&lp->lock, flags);
 	} while (1);
 }
@@ -540,11 +539,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 	 */
 
 	if (el_debug > 3)
-		printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x",
-							dev->name, axsr);
+		pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr);
 
 	if (lp->loading == 1 && !lp->txing)
-		printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
+		pr_warning("%s: Inconsistent state loading while not in tx\n",
 			dev->name);
 
 	if (lp->txing) {
@@ -555,19 +553,17 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 		int txsr = inb(TX_STATUS);
 
 		if (lp->loading == 1) {
-			if (el_debug > 2) {
-				printk(KERN_DEBUG "%s: Interrupt while loading [",
-					dev->name);
-				printk(" txsr=%02x gp=%04x rp=%04x]\n",
-					txsr, inw(GP_LOW), inw(RX_LOW));
-			}
+			if (el_debug > 2)
+				pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n",
+					dev->name, txsr, inw(GP_LOW), inw(RX_LOW));
+
 			/* Force a reload */
 			lp->loading = 2;
 			spin_unlock(&lp->lock);
 			goto out;
 		}
 		if (el_debug > 6)
-			printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x",
+			pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name,
 					txsr, inw(GP_LOW), inw(RX_LOW));
 
 		if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
@@ -576,7 +572,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 *	on trying or reset immediately ?
 			 */
 			if (el_debug > 1)
-				printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
+				pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
 					dev->name, txsr, axsr,
 					inw(ioaddr + EL1_DATAPTR),
 					inw(ioaddr + EL1_RXPTR));
@@ -587,7 +583,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 *	Timed out
 			 */
 			if (el_debug)
-				printk(KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
+				pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
 			outb(AX_SYS, AX_CMD);
 			lp->txing = 0;
 			dev->stats.tx_aborted_errors++;
@@ -598,7 +594,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 */
 
 			if (el_debug > 6)
-				printk(KERN_DEBUG " retransmitting after a collision.\n");
+				pr_debug("%s: retransmitting after a collision.\n", dev->name);
 			/*
 			 *	Poor little chip can't reset its own start
 			 *	pointer
@@ -616,9 +612,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 */
 			dev->stats.tx_packets++;
 			if (el_debug > 6)
-				printk(KERN_DEBUG " Tx succeeded %s\n",
-					(txsr & TX_RDY) ? "." :
-							"but tx is busy!");
+				pr_debug("%s: Tx succeeded %s\n", dev->name,
+					(txsr & TX_RDY) ? "." : "but tx is busy!");
 			/*
 			 *	This is safe the interrupt is atomic WRT itself.
 			 */
@@ -633,7 +628,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 
 		int rxsr = inb(RX_STATUS);
 		if (el_debug > 5)
-			printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS), inw(RX_LOW));
+			pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n",
+				dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW));
 		/*
 		 *	Just reading rx_status fixes most errors.
 		 */
@@ -643,7 +639,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			/* Handled to avoid board lock-up. */
 			dev->stats.rx_length_errors++;
 			if (el_debug > 5)
-				printk(KERN_DEBUG " runt.\n");
+				pr_debug("%s: runt.\n", dev->name);
 		} else if (rxsr & RX_GOOD) {
 			/*
 			 *	Receive worked.
@@ -654,12 +650,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 *	Nothing?  Something is broken!
 			 */
 			if (el_debug > 2)
-				printk(KERN_DEBUG "%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
+				pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
 					dev->name, rxsr);
 			el_reset(dev);
 		}
-		if (el_debug > 3)
-			printk(KERN_DEBUG ".\n");
 	}
 
 	/*
@@ -695,11 +689,11 @@ static void el_receive(struct net_device *dev)
 	pkt_len = inw(RX_LOW);
 
 	if (el_debug > 4)
-		printk(KERN_DEBUG " el_receive %d.\n", pkt_len);
+		pr_debug(" el_receive %d.\n", pkt_len);
 
 	if (pkt_len < 60 || pkt_len > 1536) {
 		if (el_debug)
-			printk(KERN_DEBUG "%s: bogus packet, length=%d\n",
+			pr_debug("%s: bogus packet, length=%d\n",
 						dev->name, pkt_len);
 		dev->stats.rx_over_errors++;
 		return;
@@ -718,8 +712,7 @@ static void el_receive(struct net_device *dev)
 
 	outw(0x00, GP_LOW);
 	if (skb == NULL) {
-		printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n",
-								dev->name);
+		pr_info("%s: Memory squeeze, dropping packet.\n", dev->name);
 		dev->stats.rx_dropped++;
 		return;
 	} else {
@@ -753,7 +746,7 @@ static void  el_reset(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug > 2)
-		printk(KERN_INFO "3c501 reset...");
+		pr_info("3c501 reset...\n");
 	outb(AX_RESET, AX_CMD);		/* Reset the chip */
 	/* Aux control, irq and loopback enabled */
 	outb(AX_LOOP, AX_CMD);
@@ -787,7 +780,7 @@ static int el1_close(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug > 2)
-		printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n",
+		pr_info("%s: Shutting down Ethernet card at %#x.\n",
 						dev->name, ioaddr);
 
 	netif_stop_queue(dev);
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index 4f08bd99583..134638a9759 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -234,16 +234,16 @@ el2_probe1(struct net_device *dev, int ioaddr)
     }
 
     if (ei_debug  &&  version_printed++ == 0)
-	printk(version);
+	pr_debug("%s", version);
 
     dev->base_addr = ioaddr;
 
-    printk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
+    pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
 
     /* Retrieve and print the ethernet address. */
     for (i = 0; i < 6; i++)
 	dev->dev_addr[i] = inb(ioaddr + i);
-    printk("%pM", dev->dev_addr);
+    pr_cont("%pM", dev->dev_addr);
 
     /* Map the 8390 back into the window. */
     outb(ECNTRL_THIN, ioaddr + 0x406);
@@ -256,7 +256,8 @@ el2_probe1(struct net_device *dev, int ioaddr)
     outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
 
     /* Probe for, turn on and clear the board's shared memory. */
-    if (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);
+    if (ei_debug > 2)
+	pr_cont(" memory jumpers %2.2x ", membase_reg);
     outb(EGACFR_NORM, ioaddr + 0x405);	/* Enable RAM */
 
     /* This should be probed for (or set via an ioctl()) at run-time.
@@ -268,7 +269,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
 #else
     ei_status.interface_num = dev->mem_end & 0xf;
 #endif
-    printk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
+    pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
 
     if ((membase_reg & 0xf0) == 0) {
 	dev->mem_start = 0;
@@ -292,7 +293,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
 		writel(test_val, mem_base + i);
 		if (readl(mem_base) != 0xba5eba5e
 		    || readl(mem_base + i) != test_val) {
-		    printk("3c503: memory failure or memory address conflict.\n");
+		    pr_warning("3c503: memory failure or memory address conflict.\n");
 		    dev->mem_start = 0;
 		    ei_status.name = "3c503-PIO";
 		    iounmap(mem_base);
@@ -344,7 +345,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
     if (dev->irq == 2)
 	dev->irq = 9;
     else if (dev->irq > 5 && dev->irq != 9) {
-	printk("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
+	pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
 	       dev->irq);
 	dev->irq = 0;
     }
@@ -359,7 +360,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
 	goto out1;
 
     if (dev->mem_start)
-	printk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
+	pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
 		dev->name, ei_status.name, (wordlength+1)<<3,
 		dev->mem_start, dev->mem_end-1);
 
@@ -367,7 +368,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
     {
 	ei_status.tx_start_page = EL2_MB1_START_PG;
 	ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
-	printk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
+	pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
 	       dev->name, ei_status.name, (wordlength+1)<<3);
     }
     release_region(ioaddr + 0x400, 8);
@@ -435,15 +436,16 @@ static void
 el2_reset_8390(struct net_device *dev)
 {
     if (ei_debug > 1) {
-	printk("%s: Resetting the 3c503 board...", dev->name);
-	printk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
+	pr_debug("%s: Resetting the 3c503 board...", dev->name);
+	pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
 	       E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
     }
     outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
     ei_status.txing = 0;
     outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
     el2_init_card(dev);
-    if (ei_debug > 1) printk("done\n");
+    if (ei_debug > 1)
+	pr_cont("done\n");
 }
 
 /* Initialize the 3c503 GA registers after a reset. */
@@ -529,7 +531,7 @@ el2_block_output(struct net_device *dev, int count,
         {
             if(!boguscount--)
             {
-                printk("%s: FIFO blocked in el2_block_output.\n", dev->name);
+                pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);
                 el2_reset_8390(dev);
                 goto blocked;
             }
@@ -581,7 +583,7 @@ el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pag
     {
         if(!boguscount--)
         {
-            printk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
+            pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
             memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
             el2_reset_8390(dev);
             goto blocked;
@@ -645,7 +647,7 @@ el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring
         {
             if(!boguscount--)
             {
-                printk("%s: FIFO blocked in el2_block_input.\n", dev->name);
+                pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);
                 el2_reset_8390(dev);
                 goto blocked;
             }
@@ -707,7 +709,7 @@ init_module(void)
 	for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
 		if (io[this_dev] == 0)  {
 			if (this_dev != 0) break; /* only autoprobe 1st one */
-			printk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n");
+			pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");
 		}
 		dev = alloc_eip_netdev();
 		if (!dev)
@@ -720,7 +722,7 @@ init_module(void)
 			continue;
 		}
 		free_netdev(dev);
-		printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
+		pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
 		break;
 	}
 	if (found)
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index 2de1c9cd7bd..f71b3540275 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -126,26 +126,25 @@
  *
  *********************************************************/
 
-static const char filename[] = __FILE__;
+#define filename __FILE__
 
-static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
+#define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
 #define TIMEOUT_MSG(lineno) \
-	printk(timeout_msg, filename,__func__,(lineno))
+	pr_notice(timeout_msg, filename, __func__, (lineno))
 
-static const char invalid_pcb_msg[] =
-"*** invalid pcb length %d at %s:%s (line %d) ***\n";
+#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
 #define INVALID_PCB_MSG(len) \
-	printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
+	pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
 
-static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
+#define search_msg "%s: Looking for 3c505 adapter at address %#x..."
 
-static char stilllooking_msg[] __initdata = "still looking...";
+#define stilllooking_msg "still looking..."
 
-static char found_msg[] __initdata = "found.\n";
+#define found_msg "found.\n"
 
-static char notfound_msg[] __initdata = "not found (reason = %d)\n";
+#define notfound_msg "not found (reason = %d)\n"
 
-static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n";
+#define couldnot_msg "%s: 3c505 not found\n"
 
 /*********************************************************
  *
@@ -284,7 +283,7 @@ static inline void adapter_reset(struct net_device *dev)
 
 	outb_control(orig_hcr, dev);
 	if (!start_receive(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: start receive command failed \n", dev->name);
+		pr_err("%s: start receive command failed\n", dev->name);
 }
 
 /* Check to make sure that a DMA transfer hasn't timed out.  This should
@@ -296,7 +295,9 @@ static inline void check_3c505_dma(struct net_device *dev)
 	elp_device *adapter = netdev_priv(dev);
 	if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
 		unsigned long flags, f;
-		printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
+		pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name,
+			adapter->current_dma.direction ? "download" : "upload",
+			get_dma_residue(dev->dma));
 		spin_lock_irqsave(&adapter->lock, flags);
 		adapter->dmaing = 0;
 		adapter->busy = 0;
@@ -321,7 +322,7 @@ static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte)
 		if (inb_status(base_addr) & HCRE)
 			return false;
 	}
-	printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
+	pr_warning("3c505: send_pcb_slow timed out\n");
 	return true;
 }
 
@@ -333,7 +334,7 @@ static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte)
 		if (inb_status(base_addr) & HCRE)
 			return false;
 	}
-	printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
+	pr_warning("3c505: send_pcb_fast timed out\n");
 	return true;
 }
 
@@ -386,7 +387,7 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
 	/* Avoid contention */
 	if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
 		if (elp_debug >= 3) {
-			printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
+			pr_debug("%s: send_pcb entered while threaded\n", dev->name);
 		}
 		return false;
 	}
@@ -424,14 +425,15 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
 
 		case ASF_PCB_NAK:
 #ifdef ELP_DEBUG
-			printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name);
+			pr_debug("%s: send_pcb got NAK\n", dev->name);
 #endif
 			goto abort;
 		}
 	}
 
 	if (elp_debug >= 1)
-		printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
+		pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n",
+			dev->name, inb_status(dev->base_addr));
 	goto abort;
 
       sti_abort:
@@ -481,7 +483,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 	while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
 	if (time_after_eq(jiffies, timeout)) {
 		TIMEOUT_MSG(__LINE__);
-		printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
+		pr_info("%s: status %02x\n", dev->name, stat);
 		return false;
 	}
 	pcb->length = inb_command(dev->base_addr);
@@ -518,7 +520,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 	/* safety check total length vs data length */
 	if (total_length != (pcb->length + 2)) {
 		if (elp_debug >= 2)
-			printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
+			pr_warning("%s: mangled PCB received\n", dev->name);
 		set_hsf(dev, HSF_PCB_NAK);
 		return false;
 	}
@@ -527,7 +529,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 		if (test_and_set_bit(0, (void *) &adapter->busy)) {
 			if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
 				set_hsf(dev, HSF_PCB_NAK);
-				printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
+				pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
 				pcb->command = 0;
 				return true;
 			} else {
@@ -552,7 +554,7 @@ static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
 	elp_device *adapter = netdev_priv(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
+		pr_debug("%s: restarting receiver\n", dev->name);
 	tx_pcb->command = CMD_RECEIVE_PACKET;
 	tx_pcb->length = sizeof(struct Rcv_pkt);
 	tx_pcb->data.rcv_pkt.buf_seg
@@ -586,7 +588,7 @@ static void receive_packet(struct net_device *dev, int len)
 	skb = dev_alloc_skb(rlen + 2);
 
 	if (!skb) {
-		printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
+		pr_warning("%s: memory squeeze, dropping packet\n", dev->name);
 		target = adapter->dma_buffer;
 		adapter->current_dma.target = NULL;
 		/* FIXME: stats */
@@ -604,7 +606,8 @@ static void receive_packet(struct net_device *dev, int len)
 
 	/* if this happens, we die */
 	if (test_and_set_bit(0, (void *) &adapter->dmaing))
-		printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
+		pr_err("%s: rx blocked, DMA in progress, dir %d\n",
+			dev->name, adapter->current_dma.direction);
 
 	adapter->current_dma.direction = 0;
 	adapter->current_dma.length = rlen;
@@ -623,14 +626,14 @@ static void receive_packet(struct net_device *dev, int len)
 	release_dma_lock(flags);
 
 	if (elp_debug >= 3) {
-		printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
+		pr_debug("%s: rx DMA transfer started\n", dev->name);
 	}
 
 	if (adapter->rx_active)
 		adapter->rx_active--;
 
 	if (!adapter->busy)
-		printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
+		pr_warning("%s: receive_packet called, busy not set.\n", dev->name);
 }
 
 /******************************************************
@@ -655,12 +658,13 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 		 * has a DMA transfer finished?
 		 */
 		if (inb_status(dev->base_addr) & DONE) {
-			if (!adapter->dmaing) {
-				printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
-			}
-			if (elp_debug >= 3) {
-				printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
-			}
+			if (!adapter->dmaing)
+				pr_warning("%s: phantom DMA completed\n", dev->name);
+
+			if (elp_debug >= 3)
+				pr_debug("%s: %s DMA complete, status %02x\n", dev->name,
+					adapter->current_dma.direction ? "tx" : "rx",
+					inb_status(dev->base_addr));
 
 			outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
 			if (adapter->current_dma.direction) {
@@ -682,7 +686,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
 				adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
 				if (elp_debug >= 2)
-					printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
+					pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t);
 				receive_packet(dev, t);
 			} else {
 				adapter->busy = 0;
@@ -713,21 +717,23 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					len = adapter->irx_pcb.data.rcv_resp.pkt_len;
 					dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
 					if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
-						printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
+						pr_err("%s: interrupt - packet not received correctly\n", dev->name);
 					} else {
 						if (elp_debug >= 3) {
-							printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
+							pr_debug("%s: interrupt - packet received of length %i (%i)\n",
+								dev->name, len, dlen);
 						}
 						if (adapter->irx_pcb.command == 0xff) {
 							if (elp_debug >= 2)
-								printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
+								pr_debug("%s: adding packet to backlog (len = %d)\n",
+									dev->name, dlen);
 							adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
 							adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
 						} else {
 							receive_packet(dev, dlen);
 						}
 						if (elp_debug >= 3)
-							printk(KERN_DEBUG "%s: packet received\n", dev->name);
+							pr_debug("%s: packet received\n", dev->name);
 					}
 					break;
 
@@ -737,7 +743,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_CONFIGURE_82586_RESPONSE:
 					adapter->got[CMD_CONFIGURE_82586] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
+						pr_debug("%s: interrupt - configure response received\n", dev->name);
 					break;
 
 					/*
@@ -746,7 +752,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_CONFIGURE_ADAPTER_RESPONSE:
 					adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
+						pr_debug("%s: Adapter memory configuration %s.\n", dev->name,
 						       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 					break;
 
@@ -756,7 +762,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_LOAD_MULTICAST_RESPONSE:
 					adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
+						pr_debug("%s: Multicast address list loading %s.\n", dev->name,
 						       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 					break;
 
@@ -766,7 +772,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_SET_ADDRESS_RESPONSE:
 					adapter->got[CMD_SET_STATION_ADDRESS] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
+						pr_debug("%s: Ethernet address setting %s.\n", dev->name,
 						       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 					break;
 
@@ -783,7 +789,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
 					adapter->got[CMD_NETWORK_STATISTICS] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
+						pr_debug("%s: interrupt - statistics response received\n", dev->name);
 					break;
 
 					/*
@@ -791,17 +797,17 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					 */
 				case CMD_TRANSMIT_PACKET_COMPLETE:
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
+						pr_debug("%s: interrupt - packet sent\n", dev->name);
 					if (!netif_running(dev))
 						break;
 					switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
 					case 0xffff:
 						dev->stats.tx_aborted_errors++;
-						printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name);
+						pr_info("%s: transmit timed out, network cable problem?\n", dev->name);
 						break;
 					case 0xfffe:
 						dev->stats.tx_fifo_errors++;
-						printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name);
+						pr_info("%s: transmit timed out, FIFO underrun\n", dev->name);
 						break;
 					}
 					netif_wake_queue(dev);
@@ -811,11 +817,12 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					 * some unknown PCB
 					 */
 				default:
-					printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
+					pr_debug("%s: unknown PCB received - %2.2x\n",
+						dev->name, adapter->irx_pcb.command);
 					break;
 				}
 			} else {
-				printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
+				pr_warning("%s: failed to read PCB on interrupt\n", dev->name);
 				adapter_reset(dev);
 			}
 		}
@@ -844,13 +851,13 @@ static int elp_open(struct net_device *dev)
 	int retval;
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to open device\n", dev->name);
+		pr_debug("%s: request to open device\n", dev->name);
 
 	/*
 	 * make sure we actually found the device
 	 */
 	if (adapter == NULL) {
-		printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name);
+		pr_err("%s: Opening a non-existent physical device\n", dev->name);
 		return -EAGAIN;
 	}
 	/*
@@ -880,17 +887,17 @@ static int elp_open(struct net_device *dev)
 	 * install our interrupt service routine
 	 */
 	if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
-		printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq);
+		pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
 		return retval;
 	}
 	if ((retval = request_dma(dev->dma, dev->name))) {
 		free_irq(dev->irq, dev);
-		printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
+		pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
 		return retval;
 	}
 	adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
 	if (!adapter->dma_buffer) {
-		printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name);
+		pr_err("%s: could not allocate DMA buffer\n", dev->name);
 		free_dma(dev->dma);
 		free_irq(dev->irq, dev);
 		return -ENOMEM;
@@ -906,7 +913,7 @@ static int elp_open(struct net_device *dev)
 	 * configure adapter memory: we need 10 multicast addresses, default==0
 	 */
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name);
+		pr_debug("%s: sending 3c505 memory configuration command\n", dev->name);
 	adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
 	adapter->tx_pcb.data.memconf.cmd_q = 10;
 	adapter->tx_pcb.data.memconf.rcv_q = 20;
@@ -917,7 +924,7 @@ static int elp_open(struct net_device *dev)
 	adapter->tx_pcb.length = sizeof(struct Memconf);
 	adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
+		pr_err("%s: couldn't send memory configuration command\n", dev->name);
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
 		while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
@@ -930,13 +937,13 @@ static int elp_open(struct net_device *dev)
 	 * configure adapter to receive broadcast messages and wait for response
 	 */
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
+		pr_debug("%s: sending 82586 configure command\n", dev->name);
 	adapter->tx_pcb.command = CMD_CONFIGURE_82586;
 	adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
 	adapter->tx_pcb.length = 2;
 	adapter->got[CMD_CONFIGURE_82586] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
+		pr_err("%s: couldn't send 82586 configure command\n", dev->name);
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
 		while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
@@ -952,7 +959,7 @@ static int elp_open(struct net_device *dev)
 	 */
 	prime_rx(dev);
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
+		pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
 
 	/*
 	 * device is now officially open!
@@ -982,7 +989,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 
 	if (test_and_set_bit(0, (void *) &adapter->busy)) {
 		if (elp_debug >= 2)
-			printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
+			pr_debug("%s: transmit blocked\n", dev->name);
 		return false;
 	}
 
@@ -1004,7 +1011,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 	}
 	/* if this happens, we die */
 	if (test_and_set_bit(0, (void *) &adapter->dmaing))
-		printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
+		pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
 
 	adapter->current_dma.direction = 1;
 	adapter->current_dma.start_time = jiffies;
@@ -1030,7 +1037,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 	release_dma_lock(flags);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
+		pr_debug("%s: DMA transfer started\n", dev->name);
 
 	return true;
 }
@@ -1044,9 +1051,10 @@ static void elp_timeout(struct net_device *dev)
 	int stat;
 
 	stat = inb_status(dev->base_addr);
-	printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
+	pr_warning("%s: transmit timed out, lost %s?\n", dev->name,
+		   (stat & ACRF) ? "interrupt" : "command");
 	if (elp_debug >= 1)
-		printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
+		pr_debug("%s: status %#02x\n", dev->name, stat);
 	dev->trans_start = jiffies;
 	dev->stats.tx_dropped++;
 	netif_wake_queue(dev);
@@ -1068,7 +1076,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	check_3c505_dma(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
+		pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
 
 	netif_stop_queue(dev);
 
@@ -1077,13 +1085,13 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	if (!send_packet(dev, skb)) {
 		if (elp_debug >= 2) {
-			printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
+			pr_debug("%s: failed to transmit packet\n", dev->name);
 		}
 		spin_unlock_irqrestore(&adapter->lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
+		pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len);
 
 	/*
 	 * start the transmit timeout
@@ -1107,7 +1115,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
 	elp_device *adapter = netdev_priv(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request for stats\n", dev->name);
+		pr_debug("%s: request for stats\n", dev->name);
 
 	/* If the device is closed, just return the latest stats we have,
 	   - we cannot ask from the adapter without interrupts */
@@ -1119,7 +1127,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
 	adapter->tx_pcb.length = 0;
 	adapter->got[CMD_NETWORK_STATISTICS] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
+		pr_err("%s: couldn't send get statistics command\n", dev->name);
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
 		while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
@@ -1169,7 +1177,7 @@ static int elp_close(struct net_device *dev)
 	elp_device *adapter = netdev_priv(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to close device\n", dev->name);
+		pr_debug("%s: request to close device\n", dev->name);
 
 	netif_stop_queue(dev);
 
@@ -1213,7 +1221,7 @@ static void elp_set_mc_list(struct net_device *dev)
 	unsigned long flags;
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
+		pr_debug("%s: request to set multicast list\n", dev->name);
 
 	spin_lock_irqsave(&adapter->lock, flags);
 
@@ -1228,7 +1236,7 @@ static void elp_set_mc_list(struct net_device *dev)
 		}
 		adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
 		if (!send_pcb(dev, &adapter->tx_pcb))
-			printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
+			pr_err("%s: couldn't send set_multicast command\n", dev->name);
 		else {
 			unsigned long timeout = jiffies + TIMEOUT;
 			while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
@@ -1247,14 +1255,14 @@ static void elp_set_mc_list(struct net_device *dev)
 	 * and wait for response
 	 */
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
+		pr_debug("%s: sending 82586 configure command\n", dev->name);
 	adapter->tx_pcb.command = CMD_CONFIGURE_82586;
 	adapter->tx_pcb.length = 2;
 	adapter->got[CMD_CONFIGURE_82586] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
 	{
 		spin_unlock_irqrestore(&adapter->lock, flags);
-		printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
+		pr_err("%s: couldn't send 82586 configure command\n", dev->name);
 	}
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
@@ -1283,17 +1291,17 @@ static int __init elp_sense(struct net_device *dev)
 	orig_HSR = inb_status(addr);
 
 	if (elp_debug > 0)
-		printk(search_msg, name, addr);
+		pr_debug(search_msg, name, addr);
 
 	if (orig_HSR == 0xff) {
 		if (elp_debug > 0)
-			printk(notfound_msg, 1);
+			pr_cont(notfound_msg, 1);
 		goto out;
 	}
 
 	/* Wait for a while; the adapter may still be booting up */
 	if (elp_debug > 0)
-		printk(stilllooking_msg);
+		pr_cont(stilllooking_msg);
 
 	if (orig_HSR & DIR) {
 		/* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
@@ -1301,7 +1309,7 @@ static int __init elp_sense(struct net_device *dev)
 		msleep(300);
 		if (inb_status(addr) & DIR) {
 			if (elp_debug > 0)
-				printk(notfound_msg, 2);
+				pr_cont(notfound_msg, 2);
 			goto out;
 		}
 	} else {
@@ -1310,7 +1318,7 @@ static int __init elp_sense(struct net_device *dev)
 		msleep(300);
 		if (!(inb_status(addr) & DIR)) {
 			if (elp_debug > 0)
-				printk(notfound_msg, 3);
+				pr_cont(notfound_msg, 3);
 			goto out;
 		}
 	}
@@ -1318,7 +1326,7 @@ static int __init elp_sense(struct net_device *dev)
 	 * It certainly looks like a 3c505.
 	 */
 	if (elp_debug > 0)
-		printk(found_msg);
+		pr_cont(found_msg);
 
 	return 0;
 out:
@@ -1349,7 +1357,7 @@ static int __init elp_autodetect(struct net_device *dev)
 
 	/* could not find an adapter */
 	if (elp_debug > 0)
-		printk(couldnot_msg, dev->name);
+		pr_debug(couldnot_msg, dev->name);
 
 	return 0;		/* Because of this, the layer above will return -ENODEV */
 }
@@ -1424,16 +1432,16 @@ static int __init elplus_setup(struct net_device *dev)
 			/* Nope, it's ignoring the command register.  This means that
 			 * either it's still booting up, or it's died.
 			 */
-			printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
+			pr_err("%s: command register wouldn't drain, ", dev->name);
 			if ((inb_status(dev->base_addr) & 7) == 3) {
 				/* If the adapter status is 3, it *could* still be booting.
 				 * Give it the benefit of the doubt for 10 seconds.
 				 */
-				printk("assuming 3c505 still starting\n");
+				pr_cont("assuming 3c505 still starting\n");
 				timeout = jiffies + 10*HZ;
 				while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
 				if (inb_status(dev->base_addr) & 7) {
-					printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
+					pr_err("%s: 3c505 failed to start\n", dev->name);
 				} else {
 					okay = 1;  /* It started */
 				}
@@ -1441,7 +1449,7 @@ static int __init elplus_setup(struct net_device *dev)
 				/* Otherwise, it must just be in a strange
 				 * state.  We probably need to kick it.
 				 */
-				printk("3c505 is sulking\n");
+				pr_cont("3c505 is sulking\n");
 			}
 		}
 		for (tries = 0; tries < 5 && okay; tries++) {
@@ -1454,18 +1462,19 @@ static int __init elplus_setup(struct net_device *dev)
 			adapter->tx_pcb.length = 0;
 			cookie = probe_irq_on();
 			if (!send_pcb(dev, &adapter->tx_pcb)) {
-				printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
+				pr_err("%s: could not send first PCB\n", dev->name);
 				probe_irq_off(cookie);
 				continue;
 			}
 			if (!receive_pcb(dev, &adapter->rx_pcb)) {
-				printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
+				pr_err("%s: could not read first PCB\n", dev->name);
 				probe_irq_off(cookie);
 				continue;
 			}
 			if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
 			    (adapter->rx_pcb.length != 6)) {
-				printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
+				pr_err("%s: first PCB wrong (%d, %d)\n", dev->name,
+					adapter->rx_pcb.command, adapter->rx_pcb.length);
 				probe_irq_off(cookie);
 				continue;
 			}
@@ -1474,32 +1483,32 @@ static int __init elplus_setup(struct net_device *dev)
 		/* It's broken.  Do a hard reset to re-initialise the board,
 		 * and try again.
 		 */
-		printk(KERN_INFO "%s: resetting adapter\n", dev->name);
+		pr_info("%s: resetting adapter\n", dev->name);
 		outb_control(adapter->hcr_val | FLSH | ATTN, dev);
 		outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
 	}
-	printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
+	pr_err("%s: failed to initialise 3c505\n", dev->name);
 	goto out;
 
       okay:
 	if (dev->irq) {		/* Is there a preset IRQ? */
 		int rpt = probe_irq_off(cookie);
 		if (dev->irq != rpt) {
-			printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
+			pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
 		}
 		/* if dev->irq == probe_irq_off(cookie), all is well */
 	} else		       /* No preset IRQ; just use what we can detect */
 		dev->irq = probe_irq_off(cookie);
 	switch (dev->irq) {    /* Legal, sane? */
 	case 0:
-		printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
+		pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n",
 		       dev->name);
 		goto out;
 	case 1:
 	case 6:
 	case 8:
 	case 13:
-		printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
+		pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n",
 		       dev->name, dev->irq);
 		       goto out;
 	}
@@ -1521,7 +1530,7 @@ static int __init elplus_setup(struct net_device *dev)
 			dev->dma = dev->mem_start & 7;
 		}
 		else {
-			printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name);
+			pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name);
 			dev->dma = ELP_DMA;
 		}
 	}
@@ -1529,11 +1538,8 @@ static int __init elplus_setup(struct net_device *dev)
 	/*
 	 * print remainder of startup message
 	 */
-	printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, "
-	       "addr %pM, ",
-	       dev->name, dev->base_addr, dev->irq, dev->dma,
-	       dev->dev_addr);
-
+	pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ",
+		dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr);
 	/*
 	 * read more information from the adapter
 	 */
@@ -1544,9 +1550,10 @@ static int __init elplus_setup(struct net_device *dev)
 	    !receive_pcb(dev, &adapter->rx_pcb) ||
 	    (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
 	    (adapter->rx_pcb.length != 10)) {
-		printk("not responding to second PCB\n");
+		pr_cont("not responding to second PCB\n");
 	}
-	printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
+	pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers,
+		adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
 
 	/*
 	 * reconfigure the adapter memory to better suit our purposes
@@ -1563,10 +1570,10 @@ static int __init elplus_setup(struct net_device *dev)
 	    !receive_pcb(dev, &adapter->rx_pcb) ||
 	    (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
 	    (adapter->rx_pcb.length != 2)) {
-		printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
+		pr_err("%s: could not configure adapter memory\n", dev->name);
 	}
 	if (adapter->rx_pcb.data.configure) {
-		printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
+		pr_err("%s: adapter configuration failed\n", dev->name);
 	}
 
 	dev->netdev_ops = &elp_netdev_ops;
@@ -1631,17 +1638,17 @@ int __init init_module(void)
 			dev->dma = dma[this_dev];
 		} else {
 			dev->dma = ELP_DMA;
-			printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n");
+			pr_warning("3c505.c: warning, using default DMA channel,\n");
 		}
 		if (io[this_dev] == 0) {
 			if (this_dev) {
 				free_netdev(dev);
 				break;
 			}
-			printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n");
+			pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n");
 		}
 		if (elplus_setup(dev) != 0) {
-			printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
+			pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
 			free_netdev(dev);
 			break;
 		}
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c
index fbbaf826def..96b86659381 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/3c507.c
@@ -364,7 +364,7 @@ static const struct net_device_ops netdev_ops = {
 
 static int __init el16_probe1(struct net_device *dev, int ioaddr)
 {
-	static unsigned char init_ID_done, version_printed;
+	static unsigned char init_ID_done;
 	int i, irq, irqval, retval;
 	struct net_local *lp;
 
@@ -391,10 +391,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 		goto out;
 	}
 
-	if (net_debug  &&  version_printed++ == 0)
-		printk(version);
-
-	printk("%s: 3c507 at %#x,", dev->name, ioaddr);
+	pr_info("%s: 3c507 at %#x,", dev->name, ioaddr);
 
 	/* We should make a few more checks here, like the first three octets of
 	   the S.A. for the manufacturer's code. */
@@ -403,7 +400,8 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 
 	irqval = request_irq(irq, &el16_interrupt, 0, DRV_NAME, dev);
 	if (irqval) {
-		printk(KERN_ERR "3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
+		pr_cont("\n");
+		pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
 		retval = -EAGAIN;
 		goto out;
 	}
@@ -414,7 +412,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 	outb(0x01, ioaddr + MISC_CTRL);
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(ioaddr + i);
-	printk(" %pM", dev->dev_addr);
+	pr_cont(" %pM", dev->dev_addr);
 
 	if (mem_start)
 		net_debug = mem_start & 7;
@@ -443,18 +441,18 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 	dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0;
 	dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
 
-	printk(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
+	pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
 		   dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1);
 
 	if (net_debug)
-		printk(version);
+		pr_debug("%s", version);
 
 	lp = netdev_priv(dev);
  	memset(lp, 0, sizeof(*lp));
 	spin_lock_init(&lp->lock);
 	lp->base = ioremap(dev->mem_start, RX_BUF_END);
 	if (!lp->base) {
-		printk(KERN_ERR "3c507: unable to remap memory\n");
+		pr_err("3c507: unable to remap memory\n");
 		retval = -EAGAIN;
 		goto out1;
 	}
@@ -488,20 +486,20 @@ static void el16_tx_timeout (struct net_device *dev)
 	void __iomem *shmem = lp->base;
 
 	if (net_debug > 1)
-		printk ("%s: transmit timed out, %s?  ", dev->name,
+		pr_debug("%s: transmit timed out, %s?  ", dev->name,
 			readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" :
 			"network cable problem");
 	/* Try to restart the adaptor. */
 	if (lp->last_restart == dev->stats.tx_packets) {
 		if (net_debug > 1)
-			printk ("Resetting board.\n");
+			pr_cont("Resetting board.\n");
 		/* Completely reset the adaptor. */
 		init_82586_mem (dev);
 		lp->tx_pkts_in_ring = 0;
 	} else {
 		/* Issue the channel attention signal and hope it "gets better". */
 		if (net_debug > 1)
-			printk ("Kicking board.\n");
+			pr_cont("Kicking board.\n");
 		writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD);
 		outb (0, ioaddr + SIGNAL_CA);	/* Issue channel-attn. */
 		lp->last_restart = dev->stats.tx_packets;
@@ -553,7 +551,8 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	void __iomem *shmem;
 
 	if (dev == NULL) {
-		printk ("net_interrupt(): irq %d for unknown device.\n", irq);
+		pr_err("%s: net_interrupt(): irq %d for unknown device.\n",
+			dev->name, irq);
 		return IRQ_NONE;
 	}
 
@@ -566,7 +565,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	status = readw(shmem+iSCB_STATUS);
 
 	if (net_debug > 4) {
-		printk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
+		pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
 	}
 
 	/* Disable the 82586's input to the interrupt line. */
@@ -577,7 +576,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	  unsigned short tx_status = readw(shmem+lp->tx_reap);
 	  if (!(tx_status & 0x8000)) {
 		if (net_debug > 5)
-			printk("Tx command incomplete (%#x).\n", lp->tx_reap);
+			pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap);
 		break;
 	  }
 	  /* Tx unsuccessful or some interesting status bit set. */
@@ -591,7 +590,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	  }
 	  dev->stats.tx_packets++;
 	  if (net_debug > 5)
-		  printk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
+		  pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
 	  lp->tx_reap += TX_BUF_SIZE;
 	  if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE)
 		lp->tx_reap = TX_BUF_START;
@@ -606,7 +605,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 
 	if (status & 0x4000) { /* Packet received. */
 		if (net_debug > 5)
-			printk("Received packet, rx_head %04x.\n", lp->rx_head);
+			pr_debug("Received packet, rx_head %04x.\n", lp->rx_head);
 		el16_rx(dev);
 	}
 
@@ -615,7 +614,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 
 	if ((status & 0x0700) != 0x0200 && netif_running(dev)) {
 		if (net_debug)
-			printk("%s: Command unit stopped, status %04x, restarting.\n",
+			pr_debug("%s: Command unit stopped, status %04x, restarting.\n",
 				   dev->name, status);
 		/* If this ever occurs we should really re-write the idle loop, reset
 		   the Tx list, and do a complete restart of the command unit.
@@ -627,7 +626,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 		/* The Rx unit is not ready, it must be hung.  Restart the receiver by
 		   initializing the rx buffers, and issuing an Rx start command. */
 		if (net_debug)
-			printk("%s: Rx unit stopped, status %04x, restarting.\n",
+			pr_debug("%s: Rx unit stopped, status %04x, restarting.\n",
 				   dev->name, status);
 		init_rx_bufs(dev);
 		writew(RX_BUF_START,shmem+iSCB_RFA);
@@ -753,9 +752,8 @@ static void init_82586_mem(struct net_device *dev)
 		int boguscnt = 50;
 		while (readw(shmem+iSCB_STATUS) == 0)
 			if (--boguscnt == 0) {
-				printk("%s: i82586 initialization timed out with status %04x, "
-					   "cmd %04x.\n", dev->name,
-					   readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
+				pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
+					dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
 				break;
 			}
 		/* Issue channel-attn -- the 82586 won't start. */
@@ -765,7 +763,7 @@ static void init_82586_mem(struct net_device *dev)
 	/* Disable loopback and enable interrupts. */
 	outb(0x84, ioaddr + MISC_CTRL);
 	if (net_debug > 4)
-		printk("%s: Initialized 82586, status %04x.\n", dev->name,
+		pr_debug("%s: Initialized 82586, status %04x.\n", dev->name,
 			   readw(shmem+iSCB_STATUS));
 	return;
 }
@@ -810,7 +808,7 @@ static void hardware_send_packet(struct net_device *dev, void *buf, short length
 		lp->tx_head = TX_BUF_START;
 
 	if (net_debug > 4) {
-		printk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
+		pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
 			   dev->name, ioaddr, length, tx_block, lp->tx_head);
 	}
 
@@ -838,7 +836,7 @@ static void el16_rx(struct net_device *dev)
 
 		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
 			|| (pkt_len & 0xC000) != 0xC000) {
-			printk(KERN_ERR "%s: Rx frame at %#x corrupted, "
+			pr_err("%s: Rx frame at %#x corrupted, "
 			       "status %04x cmd %04x next %04x "
 			       "data-buf @%04x %04x.\n",
 			       dev->name, rx_head, frame_status, rfd_cmd,
@@ -858,8 +856,7 @@ static void el16_rx(struct net_device *dev)
 			pkt_len &= 0x3fff;
 			skb = dev_alloc_skb(pkt_len+2);
 			if (skb == NULL) {
-				printk(KERN_ERR "%s: Memory squeeze, "
-				       "dropping packet.\n",
+				pr_err("%s: Memory squeeze, dropping packet.\n",
 				       dev->name);
 				dev->stats.rx_dropped++;
 				break;
@@ -926,7 +923,7 @@ MODULE_PARM_DESC(irq, "(ignored)");
 int __init init_module(void)
 {
 	if (io == 0)
-		printk("3c507: You should not use auto-probing with insmod!\n");
+		pr_notice("3c507: You should not use auto-probing with insmod!\n");
 	dev_3c507 = el16_probe(-1);
 	return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0;
 }
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 682aad89708..d2137efbd45 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -257,7 +257,7 @@ static int el3_isa_id_sequence(__be16 *phys_addr)
 			    && !memcmp(phys_addr, el3_devs[i]->dev_addr,
 				       ETH_ALEN)) {
 				if (el3_debug > 3)
-					printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+					pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
 						phys_addr[0] & 0xff, phys_addr[0] >> 8,
 						phys_addr[1] & 0xff, phys_addr[1] >> 8,
 						phys_addr[2] & 0xff, phys_addr[2] >> 8);
@@ -578,19 +578,18 @@ static int __devinit el3_common_init(struct net_device *dev)
 
 	err = register_netdev(dev);
 	if (err) {
-		printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
+		pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
 			dev->base_addr, dev->irq);
 		release_region(dev->base_addr, EL3_IO_EXTENT);
 		return err;
 	}
 
-	printk(KERN_INFO "%s: 3c5x9 found at %#3.3lx, %s port, "
-	       "address %pM, IRQ %d.\n",
+	pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n",
 	       dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],
 	       dev->dev_addr, dev->irq);
 
 	if (el3_debug > 0)
-		printk(KERN_INFO "%s", version);
+		pr_info("%s", version);
 	return 0;
 
 }
@@ -629,8 +628,8 @@ static int __init el3_mca_probe(struct device *device)
 	irq = pos5 & 0x0f;
 
 
-	printk(KERN_INFO "3c529: found %s at slot %d\n",
-		   el3_mca_adapter_names[mdev->index], slot + 1);
+	pr_info("3c529: found %s at slot %d\n",
+		el3_mca_adapter_names[mdev->index], slot + 1);
 
 	/* claim the slot */
 	strncpy(mdev->name, el3_mca_adapter_names[mdev->index],
@@ -642,7 +641,7 @@ static int __init el3_mca_probe(struct device *device)
 	irq = mca_device_transform_irq(mdev, irq);
 	ioaddr = mca_device_transform_ioport(mdev, ioaddr);
 	if (el3_debug > 2) {
-			printk(KERN_DEBUG "3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
+		pr_debug("3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
 	}
 	EL3WINDOW(0);
 	for (i = 0; i < 3; i++)
@@ -657,11 +656,11 @@ static int __init el3_mca_probe(struct device *device)
 	netdev_boot_setup_check(dev);
 
 	el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_MCA);
-	device->driver_data = dev;
+	dev_set_drvdata(device, dev);
 	err = el3_common_init(dev);
 
 	if (err) {
-		device->driver_data = NULL;
+		dev_set_drvdata(device, NULL);
 		free_netdev(dev);
 		return -ENOMEM;
 	}
@@ -725,12 +724,12 @@ static int __init el3_eisa_probe (struct device *device)
 
 /* This remove works for all device types.
  *
- * The net dev must be stored in the driver_data field */
+ * The net dev must be stored in the driver data field */
 static int __devexit el3_device_remove (struct device *device)
 {
 	struct net_device *dev;
 
-	dev  = device->driver_data;
+	dev = dev_get_drvdata(device);
 
 	el3_common_remove (dev);
 	return 0;
@@ -765,7 +764,7 @@ static ushort id_read_eeprom(int index)
 		word = (word << 1) + (inb(id_port) & 0x01);
 
 	if (el3_debug > 3)
-		printk(KERN_DEBUG "  3c509 EEPROM word %d %#4.4x.\n", index, word);
+		pr_debug("  3c509 EEPROM word %d %#4.4x.\n", index, word);
 
 	return word;
 }
@@ -787,13 +786,13 @@ el3_open(struct net_device *dev)
 
 	EL3WINDOW(0);
 	if (el3_debug > 3)
-		printk(KERN_DEBUG "%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,
+		pr_debug("%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,
 			   dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
 
 	el3_up(dev);
 
 	if (el3_debug > 3)
-		printk(KERN_DEBUG "%s: Opened 3c509  IRQ %d  status %4.4x.\n",
+		pr_debug("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
 			   dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
 
 	return 0;
@@ -805,8 +804,7 @@ el3_tx_timeout (struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	/* Transmitter timeout, serious problems. */
-	printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x "
-		   "Tx FIFO room %d.\n",
+	pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n",
 		   dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
 		   inw(ioaddr + TX_FREE));
 	dev->stats.tx_errors++;
@@ -830,7 +828,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->stats.tx_bytes += skb->len;
 
 	if (el3_debug > 4) {
-		printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+		pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
 			   dev->name, skb->len, inw(ioaddr + EL3_STATUS));
 	}
 #if 0
@@ -839,7 +837,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		ushort status = inw(ioaddr + EL3_STATUS);
 		if (status & 0x0001 		/* IRQ line active, missed one. */
 			&& inw(ioaddr + EL3_STATUS) & 1) { 			/* Make sure. */
-			printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x"
+			pr_debug("%s: Missed interrupt, status then %04x now %04x"
 				   "  Tx %2.2x Rx %4.4x.\n", dev->name, status,
 				   inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
 				   inw(ioaddr + RX_STATUS));
@@ -913,7 +911,7 @@ el3_interrupt(int irq, void *dev_id)
 
 	if (el3_debug > 4) {
 		status = inw(ioaddr + EL3_STATUS);
-		printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);
+		pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status);
 	}
 
 	while ((status = inw(ioaddr + EL3_STATUS)) &
@@ -924,7 +922,7 @@ el3_interrupt(int irq, void *dev_id)
 
 		if (status & TxAvailable) {
 			if (el3_debug > 5)
-				printk(KERN_DEBUG "	TX room bit was handled.\n");
+				pr_debug("	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue (dev);
@@ -962,7 +960,7 @@ el3_interrupt(int irq, void *dev_id)
 		}
 
 		if (--i < 0) {
-			printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",
+			pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",
 				   dev->name, status);
 			/* Clear all interrupts. */
 			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -973,7 +971,7 @@ el3_interrupt(int irq, void *dev_id)
 	}
 
 	if (el3_debug > 4) {
-		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,
+		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name,
 			   inw(ioaddr + EL3_STATUS));
 	}
 	spin_unlock(&lp->lock);
@@ -1021,7 +1019,7 @@ static void update_stats(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el3_debug > 5)
-		printk("   Updating the statistics.\n");
+		pr_debug("   Updating the statistics.\n");
 	/* Turn off statistics updates while reading. */
 	outw(StatsDisable, ioaddr + EL3_CMD);
 	/* Switch to the stats window, and read everything. */
@@ -1051,7 +1049,7 @@ el3_rx(struct net_device *dev)
 	short rx_status;
 
 	if (el3_debug > 5)
-		printk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
 			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
 	while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
 		if (rx_status & 0x4000) { /* Error, update stats. */
@@ -1073,7 +1071,7 @@ el3_rx(struct net_device *dev)
 
 			skb = dev_alloc_skb(pkt_len+5);
 			if (el3_debug > 4)
-				printk("Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);     /* Align IP on 16 byte */
@@ -1092,12 +1090,12 @@ el3_rx(struct net_device *dev)
 			outw(RxDiscard, ioaddr + EL3_CMD);
 			dev->stats.rx_dropped++;
 			if (el3_debug)
-				printk("%s: Couldn't allocate a sk_buff of size %d.\n",
+				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n",
 					   dev->name, pkt_len);
 		}
 		inw(ioaddr + EL3_STATUS); 				/* Delay. */
 		while (inw(ioaddr + EL3_STATUS) & 0x1000)
-			printk(KERN_DEBUG "	Waiting for 3c509 to discard packet, status %x.\n",
+			pr_debug("	Waiting for 3c509 to discard packet, status %x.\n",
 				   inw(ioaddr + EL3_STATUS) );
 	}
 
@@ -1118,7 +1116,7 @@ set_multicast_list(struct net_device *dev)
 		static int old;
 		if (old != dev->mc_count) {
 			old = dev->mc_count;
-			printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
+			pr_debug("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
 		}
 	}
 	spin_lock_irqsave(&lp->lock, flags);
@@ -1141,7 +1139,7 @@ el3_close(struct net_device *dev)
 	struct el3_private *lp = netdev_priv(dev);
 
 	if (el3_debug > 2)
-		printk("%s: Shutting down ethercard.\n", dev->name);
+		pr_debug("%s: Shutting down ethercard.\n", dev->name);
 
 	el3_down(dev);
 
@@ -1388,30 +1386,30 @@ el3_up(struct net_device *dev)
 		EL3WINDOW(4);
 		net_diag = inw(ioaddr + WN4_NETDIAG);
 		net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
-		printk("%s: ", dev->name);
+		pr_info("%s: ", dev->name);
 		switch (dev->if_port & 0x0c) {
 			case 12:
 				/* force full-duplex mode if 3c5x9b */
 				if (sw_info & 0x000f) {
-					printk("Forcing 3c5x9b full-duplex mode");
+					pr_cont("Forcing 3c5x9b full-duplex mode");
 					break;
 				}
 			case 8:
 				/* set full-duplex mode based on eeprom config setting */
 				if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
-					printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
+					pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
 					break;
 				}
 			default:
 				/* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
-				printk("Setting 3c5x9/3c5x9B half-duplex mode");
+				pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");
 				net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */
 		}
 
 		outw(net_diag, ioaddr + WN4_NETDIAG);
-		printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
+		pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
 		if (el3_debug > 3)
-			printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
+			pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
 		/* Enable link beat and jabber check. */
 		outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
 	}
@@ -1455,7 +1453,7 @@ el3_suspend(struct device *pdev, pm_message_t state)
 	struct el3_private *lp;
 	int ioaddr;
 
-	dev = pdev->driver_data;
+	dev = dev_get_drvdata(pdev);
 	lp = netdev_priv(dev);
 	ioaddr = dev->base_addr;
 
@@ -1479,7 +1477,7 @@ el3_resume(struct device *pdev)
 	struct el3_private *lp;
 	int ioaddr;
 
-	dev = pdev->driver_data;
+	dev = dev_get_drvdata(pdev);
 	lp = netdev_priv(dev);
 	ioaddr = dev->base_addr;
 
@@ -1539,7 +1537,7 @@ static int __init el3_init_module(void)
 	}
 	if (id_port >= 0x200) {
 		id_port = 0;
-		printk(KERN_ERR "No I/O port available for 3c509 activation.\n");
+		pr_err("No I/O port available for 3c509 activation.\n");
 	} else {
 		ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
 		if (!ret)
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 167bf23066e..3e00fa8ea65 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -420,7 +420,7 @@ int init_module(void)
 	if (debug >= 0)
 		corkscrew_debug = debug;
 	if (corkscrew_debug)
-		printk(version);
+		pr_debug("%s", version);
 	while (corkscrew_scan(-1))
 		found++;
 	return found ? 0 : -ENODEV;
@@ -437,7 +437,7 @@ struct net_device *tc515_probe(int unit)
 
 	if (corkscrew_debug > 0 && !printed) {
 		printed = 1;
-		printk(version);
+		pr_debug("%s", version);
 	}
 
 	return dev;
@@ -516,7 +516,7 @@ static struct net_device *corkscrew_scan(int unit)
 			if (pnp_device_attach(idev) < 0)
 				continue;
 			if (pnp_activate_dev(idev) < 0) {
-				printk("pnp activate failed (out of resources?)\n");
+				pr_warning("pnp activate failed (out of resources?)\n");
 				pnp_device_detach(idev);
 				continue;
 			}
@@ -531,9 +531,9 @@ static struct net_device *corkscrew_scan(int unit)
 				continue;
 			}
 			if(corkscrew_debug)
-				printk ("ISAPNP reports %s at i/o 0x%x, irq %d\n",
+				pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
 					(char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
-			printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+			pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
 		     		inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
 			/* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
 			SET_NETDEV_DEV(dev, &idev->dev);
@@ -552,7 +552,7 @@ no_pnp:
 		if (!check_device(ioaddr))
 			continue;
 
-		printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+		pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
 		     inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
 		err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
 		if (!err)
@@ -625,7 +625,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 	list_add(&vp->list, &root_corkscrew_dev);
 #endif
 
-	printk(KERN_INFO "%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
+	pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
 
 	spin_lock_init(&vp->lock);
 
@@ -648,19 +648,19 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 	}
 	checksum = (checksum ^ (checksum >> 8)) & 0xff;
 	if (checksum != 0x00)
-		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
-	printk(" %pM", dev->dev_addr);
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+	pr_cont(" %pM", dev->dev_addr);
 	if (eeprom[16] == 0x11c7) {	/* Corkscrew */
 		if (request_dma(dev->dma, "3c515")) {
-			printk(", DMA %d allocation failed", dev->dma);
+			pr_cont(", DMA %d allocation failed", dev->dma);
 			dev->dma = 0;
 		} else
-			printk(", DMA %d", dev->dma);
+			pr_cont(", DMA %d", dev->dma);
 	}
-	printk(", IRQ %d\n", dev->irq);
+	pr_cont(", IRQ %d\n", dev->irq);
 	/* Tell them about an invalid IRQ. */
 	if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
-		printk(KERN_WARNING " *** Warning: this IRQ is unlikely to work! ***\n");
+		pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
 
 	{
 		char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
@@ -669,9 +669,9 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 		vp->available_media = inw(ioaddr + Wn3_Options);
 		config = inl(ioaddr + Wn3_Config);
 		if (corkscrew_debug > 1)
-			printk(KERN_INFO "  Internal config register is %4.4x, transceivers %#x.\n",
+			pr_info("  Internal config register is %4.4x, transceivers %#x.\n",
 				config, inw(ioaddr + Wn3_Options));
-		printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+		pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 			8 << config & Ram_size,
 			config & Ram_width ? "word" : "byte",
 			ram_split[(config & Ram_split) >> Ram_split_shift],
@@ -682,7 +682,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 		dev->if_port = vp->default_media;
 	}
 	if (vp->media_override != 7) {
-		printk(KERN_INFO "  Media override to transceiver type %d (%s).\n",
+		pr_info("  Media override to transceiver type %d (%s).\n",
 		       vp->media_override,
 		       media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
@@ -718,7 +718,7 @@ static int corkscrew_open(struct net_device *dev)
 
 	if (vp->media_override != 7) {
 		if (corkscrew_debug > 1)
-			printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+			pr_info("%s: Media override to transceiver %d (%s).\n",
 				dev->name, vp->media_override,
 				media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
@@ -729,7 +729,7 @@ static int corkscrew_open(struct net_device *dev)
 			dev->if_port = media_tbl[dev->if_port].next;
 
 		if (corkscrew_debug > 1)
-			printk("%s: Initial media type %s.\n",
+			pr_debug("%s: Initial media type %s.\n",
 			       dev->name, media_tbl[dev->if_port].name);
 
 		init_timer(&vp->timer);
@@ -744,7 +744,7 @@ static int corkscrew_open(struct net_device *dev)
 	outl(config, ioaddr + Wn3_Config);
 
 	if (corkscrew_debug > 1) {
-		printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
+		pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
 		       dev->name, config);
 	}
 
@@ -777,7 +777,7 @@ static int corkscrew_open(struct net_device *dev)
 
 	if (corkscrew_debug > 1) {
 		EL3WINDOW(4);
-		printk("%s: corkscrew_open() irq %d media status %4.4x.\n",
+		pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
 		       dev->name, dev->irq, inw(ioaddr + Wn4_Media));
 	}
 
@@ -814,8 +814,7 @@ static int corkscrew_open(struct net_device *dev)
 	if (vp->full_bus_master_rx) {	/* Boomerang bus master. */
 		vp->cur_rx = vp->dirty_rx = 0;
 		if (corkscrew_debug > 2)
-			printk("%s:  Filling in the Rx ring.\n",
-			       dev->name);
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			struct sk_buff *skb;
 			if (i < (RX_RING_SIZE - 1))
@@ -877,7 +876,7 @@ static void corkscrew_timer(unsigned long data)
 	int ok = 0;
 
 	if (corkscrew_debug > 1)
-		printk("%s: Media selection timer tick happened, %s.\n",
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
 		       dev->name, media_tbl[dev->if_port].name);
 
 	spin_lock_irqsave(&vp->lock, flags);
@@ -894,12 +893,12 @@ static void corkscrew_timer(unsigned long data)
 			if (media_status & Media_LnkBeat) {
 				ok = 1;
 				if (corkscrew_debug > 1)
-					printk("%s: Media %s has link beat, %x.\n",
+					pr_debug("%s: Media %s has link beat, %x.\n",
 						dev->name,
 						media_tbl[dev->if_port].name,
 						media_status);
 			} else if (corkscrew_debug > 1)
-				printk("%s: Media %s is has no link beat, %x.\n",
+				pr_debug("%s: Media %s is has no link beat, %x.\n",
 					dev->name,
 					media_tbl[dev->if_port].name,
 					media_status);
@@ -907,7 +906,7 @@ static void corkscrew_timer(unsigned long data)
 			break;
 		default:	/* Other media types handled by Tx timeouts. */
 			if (corkscrew_debug > 1)
-				printk("%s: Media %s is has no indication, %x.\n",
+				pr_debug("%s: Media %s is has no indication, %x.\n",
 					dev->name,
 					media_tbl[dev->if_port].name,
 					media_status);
@@ -925,12 +924,12 @@ static void corkscrew_timer(unsigned long data)
 			if (dev->if_port == 8) {	/* Go back to default. */
 				dev->if_port = vp->default_media;
 				if (corkscrew_debug > 1)
-					printk("%s: Media selection failing, using default %s port.\n",
+					pr_debug("%s: Media selection failing, using default %s port.\n",
 						dev->name,
 						media_tbl[dev->if_port].name);
 			} else {
 				if (corkscrew_debug > 1)
-					printk("%s: Media selection failed, now trying %s port.\n",
+					pr_debug("%s: Media selection failed, now trying %s port.\n",
 						dev->name,
 						media_tbl[dev->if_port].name);
 				vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
@@ -953,7 +952,7 @@ static void corkscrew_timer(unsigned long data)
 
 	spin_unlock_irqrestore(&vp->lock, flags);
 	if (corkscrew_debug > 1)
-		printk("%s: Media selection timer finished, %s.\n",
+		pr_debug("%s: Media selection timer finished, %s.\n",
 		       dev->name, media_tbl[dev->if_port].name);
 
 #endif				/* AUTOMEDIA */
@@ -966,23 +965,21 @@ static void corkscrew_timeout(struct net_device *dev)
 	struct corkscrew_private *vp = netdev_priv(dev);
 	int ioaddr = dev->base_addr;
 
-	printk(KERN_WARNING
-	       "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+	pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
 	       dev->name, inb(ioaddr + TxStatus),
 	       inw(ioaddr + EL3_STATUS));
 	/* Slight code bloat to be user friendly. */
 	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
-		printk(KERN_WARNING
-		       "%s: Transmitter encountered 16 collisions -- network"
+		pr_warning("%s: Transmitter encountered 16 collisions --"
 		       " network cable problem?\n", dev->name);
 #ifndef final_version
-	printk("  Flags; bus-master %d, full %d; dirty %d current %d.\n",
+	pr_debug("  Flags; bus-master %d, full %d; dirty %d current %d.\n",
 	       vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
 	       vp->cur_tx);
-	printk("  Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
+	pr_debug("  Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
 	       &vp->tx_ring[0]);
 	for (i = 0; i < TX_RING_SIZE; i++) {
-		printk("  %d: %p  length %8.8x status %8.8x\n", i,
+		pr_debug("  %d: %p  length %8.8x status %8.8x\n", i,
 		       &vp->tx_ring[i],
 		       vp->tx_ring[i].length, vp->tx_ring[i].status);
 	}
@@ -1017,13 +1014,13 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
 		int i;
 
 		if (vp->tx_full)	/* No room to transmit with */
-			return 1;
+			return NETDEV_TX_BUSY;
 		if (vp->cur_tx != 0)
 			prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
 		else
 			prev_entry = NULL;
 		if (corkscrew_debug > 3)
-			printk("%s: Trying to send a packet, Tx index %d.\n",
+			pr_debug("%s: Trying to send a packet, Tx index %d.\n",
 				dev->name, vp->cur_tx);
 		/* vp->tx_full = 1; */
 		vp->tx_skbuff[entry] = skb;
@@ -1102,7 +1099,7 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
 		while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
 			if (tx_status & 0x3C) {	/* A Tx-disabling error occurred.  */
 				if (corkscrew_debug > 2)
-					printk("%s: Tx error, status %2.2x.\n",
+					pr_debug("%s: Tx error, status %2.2x.\n",
 						dev->name, tx_status);
 				if (tx_status & 0x04)
 					dev->stats.tx_fifo_errors++;
@@ -1143,7 +1140,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 	status = inw(ioaddr + EL3_STATUS);
 
 	if (corkscrew_debug > 4)
-		printk("%s: interrupt, status %4.4x, timer %d.\n",
+		pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
 			dev->name, status, latency);
 	if ((status & 0xE000) != 0xE000) {
 		static int donedidthis;
@@ -1151,7 +1148,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 		   Ignore a single early interrupt, but don't hang the machine for
 		   other interrupt problems. */
 		if (donedidthis++ > 100) {
-			printk(KERN_ERR "%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
+			pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
 				   dev->name, status, netif_running(dev));
 			free_irq(dev->irq, dev);
 			dev->irq = -1;
@@ -1160,14 +1157,14 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 
 	do {
 		if (corkscrew_debug > 5)
-			printk("%s: In interrupt loop, status %4.4x.\n",
+			pr_debug("%s: In interrupt loop, status %4.4x.\n",
 			       dev->name, status);
 		if (status & RxComplete)
 			corkscrew_rx(dev);
 
 		if (status & TxAvailable) {
 			if (corkscrew_debug > 5)
-				printk("	TX room bit was handled.\n");
+				pr_debug("	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue(dev);
@@ -1212,19 +1209,20 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 			if (status & StatsFull) {	/* Empty statistics. */
 				static int DoneDidThat;
 				if (corkscrew_debug > 4)
-					printk("%s: Updating stats.\n", dev->name);
+					pr_debug("%s: Updating stats.\n", dev->name);
 				update_stats(ioaddr, dev);
 				/* DEBUG HACK: Disable statistics as an interrupt source. */
 				/* This occurs when we have the wrong media type! */
 				if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
 					int win, reg;
-					printk("%s: Updating stats failed, disabling stats as an"
-					     " interrupt source.\n", dev->name);
+					pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n",
+						dev->name);
 					for (win = 0; win < 8; win++) {
 						EL3WINDOW(win);
-						printk("\n Vortex window %d:", win);
+						pr_notice("Vortex window %d:", win);
 						for (reg = 0; reg < 16; reg++)
-							printk(" %2.2x", inb(ioaddr + reg));
+							pr_cont(" %2.2x", inb(ioaddr + reg));
+						pr_cont("\n");
 					}
 					EL3WINDOW(7);
 					outw(SetIntrEnb | TxAvailable |
@@ -1246,9 +1244,8 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 		}
 
 		if (--i < 0) {
-			printk(KERN_ERR "%s: Too much work in interrupt, status %4.4x.  "
-			     "Disabling functions (%4.4x).\n", dev->name,
-			     status, SetStatusEnb | ((~status) & 0x7FE));
+			pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",
+				dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
 			/* Disable all pending interrupts. */
 			outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
 			outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
@@ -1262,7 +1259,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 	spin_unlock(&lp->lock);
 
 	if (corkscrew_debug > 4)
-		printk("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
+		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
 	return IRQ_HANDLED;
 }
 
@@ -1273,13 +1270,13 @@ static int corkscrew_rx(struct net_device *dev)
 	short rx_status;
 
 	if (corkscrew_debug > 5)
-		printk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
 		     inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
 	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
 		if (rx_status & 0x4000) {	/* Error, update stats. */
 			unsigned char rx_error = inb(ioaddr + RxErrors);
 			if (corkscrew_debug > 2)
-				printk(" Rx error: status %2.2x.\n",
+				pr_debug(" Rx error: status %2.2x.\n",
 				       rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)
@@ -1299,7 +1296,7 @@ static int corkscrew_rx(struct net_device *dev)
 
 			skb = dev_alloc_skb(pkt_len + 5 + 2);
 			if (corkscrew_debug > 4)
-				printk("Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 				     pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
@@ -1318,7 +1315,7 @@ static int corkscrew_rx(struct net_device *dev)
 						break;
 				continue;
 			} else if (corkscrew_debug)
-				printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
+				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
 		}
 		outw(RxDiscard, ioaddr + EL3_CMD);
 		dev->stats.rx_dropped++;
@@ -1338,13 +1335,13 @@ static int boomerang_rx(struct net_device *dev)
 	int rx_status;
 
 	if (corkscrew_debug > 5)
-		printk("   In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
+		pr_debug("   In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
 			inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
 	while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
 		if (rx_status & RxDError) {	/* Error, update stats. */
 			unsigned char rx_error = rx_status >> 16;
 			if (corkscrew_debug > 2)
-				printk(" Rx error: status %2.2x.\n",
+				pr_debug(" Rx error: status %2.2x.\n",
 				       rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)
@@ -1364,7 +1361,7 @@ static int boomerang_rx(struct net_device *dev)
 
 			dev->stats.rx_bytes += pkt_len;
 			if (corkscrew_debug > 4)
-				printk("Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 				     pkt_len, rx_status);
 
 			/* Check if the packet is long enough to just accept without
@@ -1385,7 +1382,7 @@ static int boomerang_rx(struct net_device *dev)
 				temp = skb_put(skb, pkt_len);
 				/* Remove this checking code for final release. */
 				if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
-					    printk("%s: Warning -- the skbuff addresses do not match"
+					pr_warning("%s: Warning -- the skbuff addresses do not match"
 					     " in boomerang_rx: %p vs. %p / %p.\n",
 					     dev->name,
 					     isa_bus_to_virt(vp->
@@ -1427,12 +1424,11 @@ static int corkscrew_close(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	if (corkscrew_debug > 1) {
-		printk("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
+		pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
 		     dev->name, inw(ioaddr + EL3_STATUS),
 		     inb(ioaddr + TxStatus));
-		printk("%s: corkscrew close stats: rx_nocopy %d rx_copy %d"
-		       " tx_queued %d.\n", dev->name, rx_nocopy, rx_copy,
-		       queued_packet);
+		pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n",
+			dev->name, rx_nocopy, rx_copy, queued_packet);
 	}
 
 	del_timer(&vp->timer);
@@ -1534,7 +1530,7 @@ static void set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 		if (corkscrew_debug > 3)
-			printk("%s: Setting promiscuous mode.\n",
+			pr_debug("%s: Setting promiscuous mode.\n",
 			       dev->name);
 		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
 	} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 8f734d74b51..cdd955c4014 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -176,7 +176,7 @@ sizeof(nop_cmd) = 8;
     if(!p->scb->cmd) break; \
     DELAY_16(); \
     if(i == 1023) { \
-      printk(KERN_WARNING "%s:%d: scb_cmd timed out .. resetting i82586\n",\
+      pr_warning("%s:%d: scb_cmd timed out .. resetting i82586\n",\
       	dev->name,__LINE__); \
       elmc_id_reset586(); } } }
 
@@ -291,7 +291,7 @@ static int elmc_open(struct net_device *dev)
 	ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
 			  dev->name, dev);
 	if (ret) {
-		printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
+		pr_err("%s: couldn't get irq %d\n", dev->name, dev->irq);
 		elmc_id_reset586();
 		return ret;
 	}
@@ -371,9 +371,9 @@ static void alloc586(struct net_device *dev)
 
 	DELAY(2);
 
-	if (p->iscp->busy) {
-		printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);
-	}
+	if (p->iscp->busy)
+		pr_err("%s: Init-Problems (alloc).\n", dev->name);
+
 	memset((char *) p->scb, 0, sizeof(struct scb_struct));
 }
 
@@ -470,7 +470,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	mca_set_adapter_procfn(slot, (MCA_ProcFn) elmc_getinfo, dev);
 
 	/* if we get this far, adapter has been found - carry on */
-	printk(KERN_INFO "%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
+	pr_info("%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
 
 	/* Now we extract configuration info from the card.
 	   The 3c523 provides information in two of the POS registers, but
@@ -507,7 +507,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	memset(pr, 0, sizeof(struct priv));
 	pr->slot = slot;
 
-	printk(KERN_INFO "%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
+	pr_info("%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
 	       dev->base_addr);
 
 	/* Determine if we're using the on-board transceiver (i.e. coax) or
@@ -529,7 +529,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 
 	size = 0x4000;		/* check for 16K mem */
 	if (!check586(dev, dev->mem_start, size)) {
-		printk(KERN_ERR "%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
+		pr_err("%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
 		       dev->mem_start);
 		retval = -ENODEV;
 		goto err_out;
@@ -546,7 +546,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	pr->num_recv_buffs = NUM_RECV_BUFFS_16;
 
 	/* dump all the assorted information */
-	printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
+	pr_info("%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
 	       dev->irq, dev->if_port ? "ex" : "in",
 	       dev->mem_start, dev->mem_end - 1);
 
@@ -555,7 +555,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(dev->base_addr + i);
 
-	printk(KERN_INFO "%s: hardware address %pM\n",
+	pr_info("%s: hardware address %pM\n",
 	       dev->name, dev->dev_addr);
 
 	dev->netdev_ops = &netdev_ops;
@@ -660,7 +660,7 @@ static int init586(struct net_device *dev)
 	}
 
 	if ((cfg_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_COMPL | STAT_OK)) {
-		printk(KERN_WARNING "%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
+		pr_warning("%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
 		return 1;
 	}
 	/*
@@ -686,7 +686,8 @@ static int init586(struct net_device *dev)
 	}
 
 	if ((ias_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_OK | STAT_COMPL)) {
-		printk(KERN_WARNING "%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status);
+		pr_warning("%s (elmc): individual address setup command failed: %04x\n",
+			dev->name, ias_cmd->cmd_status);
 		return 1;
 	}
 	/*
@@ -707,7 +708,7 @@ static int init586(struct net_device *dev)
 	s = jiffies;
 	while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
 		if (time_after(jiffies, s + 30*HZ/100)) {
-			printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
+			pr_warning("%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
 			result = 1;
 			break;
 		}
@@ -723,14 +724,14 @@ static int init586(struct net_device *dev)
 		if (result & TDR_LNK_OK) {
 			/* empty */
 		} else if (result & TDR_XCVR_PRB) {
-			printk(KERN_WARNING "%s: TDR: Transceiver problem!\n", dev->name);
+			pr_warning("%s: TDR: Transceiver problem!\n", dev->name);
 		} else if (result & TDR_ET_OPN) {
-			printk(KERN_WARNING "%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+			pr_warning("%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
 		} else if (result & TDR_ET_SRT) {
 			if (result & TDR_TIMEMASK)	/* time == 0 -> strange :-) */
-				printk(KERN_WARNING "%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+				pr_warning("%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
 		} else {
-			printk(KERN_WARNING "%s: TDR: Unknown status %04x\n", dev->name, result);
+			pr_warning("%s: TDR: Unknown status %04x\n", dev->name, result);
 		}
 	}
 	/*
@@ -774,11 +775,11 @@ static int init586(struct net_device *dev)
 		/* I don't understand this: do we really need memory after the init? */
 		int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
 		if (len <= 0) {
-			printk(KERN_ERR "%s: Ooooops, no memory for MC-Setup!\n", dev->name);
+			pr_err("%s: Ooooops, no memory for MC-Setup!\n", dev->name);
 		} else {
 			if (len < num_addrs) {
 				num_addrs = len;
-				printk(KERN_WARNING "%s: Sorry, can only apply %d MC-Address(es).\n",
+				pr_warning("%s: Sorry, can only apply %d MC-Address(es).\n",
 				       dev->name, num_addrs);
 			}
 			mc_cmd = (struct mcsetup_cmd_struct *) ptr;
@@ -799,7 +800,7 @@ static int init586(struct net_device *dev)
 					break;
 			}
 			if (!(mc_cmd->cmd_status & STAT_COMPL)) {
-				printk(KERN_WARNING "%s: Can't apply multicast-address-list.\n", dev->name);
+				pr_warning("%s: Can't apply multicast-address-list.\n", dev->name);
 			}
 		}
 	}
@@ -812,7 +813,7 @@ static int init586(struct net_device *dev)
 		p->xmit_buffs[i] = (struct tbd_struct *) ptr;	/* TBD */
 		ptr = (char *) ptr + sizeof(struct tbd_struct);
 		if ((void *) ptr > (void *) p->iscp) {
-			printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", dev->name);
+			pr_err("%s: not enough shared-mem for your configuration!\n", dev->name);
 			return 1;
 		}
 		memset((char *) (p->xmit_cmds[i]), 0, sizeof(struct transmit_cmd_struct));
@@ -936,7 +937,8 @@ elmc_interrupt(int irq, void *dev_id)
 		if (stat & STAT_CNA) {
 			/* CU went 'not ready' */
 			if (netif_running(dev)) {
-				printk(KERN_WARNING "%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+				pr_warning("%s: oops! CU has left active state. stat: %04x/%04x.\n",
+					dev->name, (int) stat, (int) p->scb->status);
 			}
 		}
 #endif
@@ -951,7 +953,8 @@ elmc_interrupt(int irq, void *dev_id)
 				p->scb->cmd = RUC_RESUME;
 				elmc_attn586();
 			} else {
-				printk(KERN_WARNING "%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+				pr_warning("%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n",
+					dev->name, (int) stat, (int) p->scb->status);
 				elmc_rnr_int(dev);
 			}
 		}
@@ -995,11 +998,11 @@ static void elmc_rcv_int(struct net_device *dev)
 					dev->stats.rx_dropped++;
 				}
 			} else {
-				printk(KERN_WARNING "%s: received oversized frame.\n", dev->name);
+				pr_warning("%s: received oversized frame.\n", dev->name);
 				dev->stats.rx_dropped++;
 			}
 		} else {	/* frame !(ok), only with 'save-bad-frames' */
-			printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status);
+			pr_warning("%s: oops! rfd-error-status: %04x\n", dev->name, status);
 			dev->stats.rx_errors++;
 		}
 		p->rfd_top->status = 0;
@@ -1028,7 +1031,7 @@ static void elmc_rnr_int(struct net_device *dev)
 	alloc_rfa(dev, (char *) p->rfd_first);
 	startrecv586(dev);	/* restart RU */
 
-	printk(KERN_WARNING "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
+	pr_warning("%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
 
 }
 
@@ -1043,7 +1046,7 @@ static void elmc_xmt_int(struct net_device *dev)
 
 	status = p->xmit_cmds[p->xmit_last]->cmd_status;
 	if (!(status & STAT_COMPL)) {
-		printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
+		pr_warning("%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
 	}
 	if (status & STAT_OK) {
 		dev->stats.tx_packets++;
@@ -1051,18 +1054,18 @@ static void elmc_xmt_int(struct net_device *dev)
 	} else {
 		dev->stats.tx_errors++;
 		if (status & TCMD_LATECOLL) {
-			printk(KERN_WARNING "%s: late collision detected.\n", dev->name);
+			pr_warning("%s: late collision detected.\n", dev->name);
 			dev->stats.collisions++;
 		} else if (status & TCMD_NOCARRIER) {
 			dev->stats.tx_carrier_errors++;
-			printk(KERN_WARNING "%s: no carrier detected.\n", dev->name);
+			pr_warning("%s: no carrier detected.\n", dev->name);
 		} else if (status & TCMD_LOSTCTS) {
-			printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name);
+			pr_warning("%s: loss of CTS detected.\n", dev->name);
 		} else if (status & TCMD_UNDERRUN) {
 			dev->stats.tx_fifo_errors++;
-			printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name);
+			pr_warning("%s: DMA underrun detected.\n", dev->name);
 		} else if (status & TCMD_MAXCOLL) {
-			printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name);
+			pr_warning("%s: Max. collisions exceeded.\n", dev->name);
 			dev->stats.collisions += 16;
 		}
 	}
@@ -1099,10 +1102,11 @@ static void elmc_timeout(struct net_device *dev)
 	struct priv *p = netdev_priv(dev);
 	/* COMMAND-UNIT active? */
 	if (p->scb->status & CU_ACTIVE) {
-#ifdef DEBUG
-		printk("%s: strange ... timeout with CU active?!?\n", dev->name);
-		printk("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, (int) p->xmit_cmds[0]->cmd_status, (int) p->nop_cmds[0]->cmd_status, (int) p->nop_cmds[1]->cmd_status, (int) p->nop_point);
-#endif
+		pr_debug("%s: strange ... timeout with CU active?!?\n", dev->name);
+		pr_debug("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name,
+			(int)p->xmit_cmds[0]->cmd_status,
+			(int)p->nop_cmds[0]->cmd_status,
+			(int)p->nop_cmds[1]->cmd_status, (int)p->nop_point);
 		p->scb->cmd = CUC_ABORT;
 		elmc_attn586();
 		WAIT_4_SCB_CMD();
@@ -1112,10 +1116,10 @@ static void elmc_timeout(struct net_device *dev)
 		WAIT_4_SCB_CMD();
 		netif_wake_queue(dev);
 	} else {
-#ifdef DEBUG
-		printk("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status);
-		printk("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
-#endif
+		pr_debug("%s: xmitter timed out, try to restart! stat: %04x\n",
+			dev->name, p->scb->status);
+		pr_debug("%s: command-stats: %04x %04x\n", dev->name,
+			p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
 		elmc_close(dev);
 		elmc_open(dev);
 	}
@@ -1162,7 +1166,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
 			break;
 		}
 		if (i == 15) {
-			printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
+			pr_warning("%s: Can't start transmit-command.\n", dev->name);
 		}
 	}
 #else
@@ -1287,11 +1291,12 @@ int __init init_module(void)
 		free_netdev(dev);
 		if (io[this_dev]==0)
 			break;
-		printk(KERN_WARNING "3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
+		pr_warning("3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
 	}
 
 	if(found==0) {
-		if(io[0]==0) printk(KERN_NOTICE "3c523.c: No 3c523 cards found\n");
+		if (io[0]==0)
+			pr_notice("3c523.c: No 3c523 cards found\n");
 		return -ENXIO;
 	} else return 0;
 }
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index b61073c42bf..aaa8a9f405d 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -125,8 +125,6 @@ static const char* cardname = DRV_NAME;
 #define NET_DEBUG 2
 #endif
 
-#undef DEBUG_IRQ
-
 static unsigned int mc32_debug = NET_DEBUG;
 
 /* The number of low I/O ports used by the ethercard. */
@@ -351,15 +349,15 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	/* Time to play MCA games */
 
 	if (mc32_debug  &&  version_printed++ == 0)
-		printk(KERN_DEBUG "%s", version);
+		pr_debug("%s", version);
 
-	printk(KERN_INFO "%s: %s found in slot %d:", dev->name, cardname, slot);
+	pr_info("%s: %s found in slot %d: ", dev->name, cardname, slot);
 
 	POS = mca_read_stored_pos(slot, 2);
 
 	if(!(POS&1))
 	{
-		printk(" disabled.\n");
+		pr_cont("disabled.\n");
 		return -ENODEV;
 	}
 
@@ -370,7 +368,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	POS = mca_read_stored_pos(slot, 4);
 	if(!(POS&1))
 	{
-		printk("memory window disabled.\n");
+		pr_cont("memory window disabled.\n");
 		return -ENODEV;
 	}
 
@@ -379,7 +377,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	i=(POS>>4)&3;
 	if(i==3)
 	{
-		printk("invalid memory window.\n");
+		pr_cont("invalid memory window.\n");
 		return -ENODEV;
 	}
 
@@ -392,11 +390,11 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 
 	if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname))
 	{
-		printk("io 0x%3lX, which is busy.\n", dev->base_addr);
+		pr_cont("io 0x%3lX, which is busy.\n", dev->base_addr);
 		return -EBUSY;
 	}
 
-	printk("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
+	pr_cont("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
 		dev->base_addr, dev->irq, dev->mem_start, i/1024);
 
 
@@ -416,7 +414,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 		dev->dev_addr[i] = mca_read_pos(slot,3);
 	}
 
-	printk("%s: Address %pM", dev->name, dev->dev_addr);
+	pr_info("%s: Address %pM ", dev->name, dev->dev_addr);
 
 	mca_write_pos(slot, 6, 0);
 	mca_write_pos(slot, 7, 0);
@@ -424,9 +422,9 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	POS = mca_read_stored_pos(slot, 4);
 
 	if(POS&2)
-		printk(" : BNC port selected.\n");
+		pr_cont(": BNC port selected.\n");
 	else
-		printk(" : AUI port selected.\n");
+		pr_cont(": AUI port selected.\n");
 
 	POS=inb(dev->base_addr+HOST_CTRL);
 	POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET;
@@ -447,7 +445,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
 	if (err) {
 		release_region(dev->base_addr, MC32_IO_EXTENT);
-		printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
+		pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
 		goto err_exit_ports;
 	}
 
@@ -463,7 +461,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 		i++;
 		if(i == 1000)
 		{
-			printk(KERN_ERR "%s: failed to boot adapter.\n", dev->name);
+			pr_err("%s: failed to boot adapter.\n", dev->name);
 			err = -ENODEV;
 			goto err_exit_irq;
 		}
@@ -475,10 +473,10 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	if(base>0)
 	{
 		if(base < 0x0C)
-			printk(KERN_ERR "%s: %s%s.\n", dev->name, failures[base-1],
+			pr_err("%s: %s%s.\n", dev->name, failures[base-1],
 				base<0x0A?" test failure":"");
 		else
-			printk(KERN_ERR "%s: unknown failure %d.\n", dev->name, base);
+			pr_err("%s: unknown failure %d.\n", dev->name, base);
 		err = -ENODEV;
 		goto err_exit_irq;
 	}
@@ -494,7 +492,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 			udelay(50);
 			if(n>100)
 			{
-				printk(KERN_ERR "%s: mailbox read fail (%d).\n", dev->name, i);
+				pr_err("%s: mailbox read fail (%d).\n", dev->name, i);
 				err = -ENODEV;
 				goto err_exit_irq;
 			}
@@ -527,7 +525,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	init_completion(&lp->execution_cmd);
 	init_completion(&lp->xceiver_cmd);
 
-	printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
+	pr_info("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
 		dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base);
 
 	dev->netdev_ops		= &netdev_ops;
@@ -939,7 +937,7 @@ static int mc32_open(struct net_device *dev)
 	 */
 
 	if(mc32_command(dev, 8, descnumbuffs, 4)) {
-		printk("%s: %s rejected our buffer configuration!\n",
+		pr_info("%s: %s rejected our buffer configuration!\n",
 	 	       dev->name, cardname);
 		mc32_close(dev);
 		return -ENOBUFS;
@@ -995,7 +993,7 @@ static int mc32_open(struct net_device *dev)
 
 static void mc32_timeout(struct net_device *dev)
 {
-	printk(KERN_WARNING "%s: transmit timed out?\n", dev->name);
+	pr_warning("%s: transmit timed out?\n", dev->name);
 	/* Try to restart the adaptor. */
 	netif_wake_queue(dev);
 }
@@ -1032,7 +1030,7 @@ static int mc32_send_packet(struct sk_buff *skb, struct net_device *dev)
 	netif_stop_queue(dev);
 
 	if(atomic_read(&lp->tx_count)==0) {
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (skb_padto(skb, ETH_ZLEN)) {
@@ -1335,11 +1333,9 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
 	{
 		status=inb(ioaddr+HOST_CMD);
 
-#ifdef DEBUG_IRQ
-		printk("Status TX%d RX%d EX%d OV%d BC%d\n",
+		pr_debug("Status TX%d RX%d EX%d OV%d BC%d\n",
 			(status&7), (status>>3)&7, (status>>6)&1,
 			(status>>7)&1, boguscount);
-#endif
 
 		switch(status&7)
 		{
@@ -1354,7 +1350,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
 				complete(&lp->xceiver_cmd);
 				break;
 			default:
-				printk("%s: strange tx ack %d\n", dev->name, status&7);
+				pr_notice("%s: strange tx ack %d\n", dev->name, status&7);
 		}
 		status>>=3;
 		switch(status&7)
@@ -1376,7 +1372,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
 				mc32_start_transceiver(dev);
 				break;
 			default:
-				printk("%s: strange rx ack %d\n",
+				pr_notice("%s: strange rx ack %d\n",
 					dev->name, status&7);
 		}
 		status>>=3;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c5669840242..c34aee91250 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -828,14 +828,14 @@ static int vortex_resume(struct pci_dev *pdev)
 		pci_restore_state(pdev);
 		err = pci_enable_device(pdev);
 		if (err) {
-			printk(KERN_WARNING "%s: Could not enable device \n",
+			pr_warning("%s: Could not enable device\n",
 				dev->name);
 			return err;
 		}
 		pci_set_master(pdev);
 		if (request_irq(dev->irq, vp->full_bus_master_rx ?
 				&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
-			printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+			pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
 			pci_disable_device(pdev);
 			return -EBUSY;
 		}
@@ -894,7 +894,7 @@ static int __devexit vortex_eisa_remove(struct device *device)
 	dev = eisa_get_drvdata(edev);
 
 	if (!dev) {
-		printk("vortex_eisa_remove called for Compaq device!\n");
+		pr_err("vortex_eisa_remove called for Compaq device!\n");
 		BUG();
 	}
 
@@ -1051,7 +1051,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	struct eisa_device *edev = NULL;
 
 	if (!printed_version) {
-		printk (version);
+		pr_info("%s", version);
 		printed_version = 1;
 	}
 
@@ -1068,7 +1068,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	dev = alloc_etherdev(sizeof(*vp));
 	retval = -ENOMEM;
 	if (!dev) {
-		printk (KERN_ERR PFX "unable to allocate etherdev, aborting\n");
+		pr_err(PFX "unable to allocate etherdev, aborting\n");
 		goto out;
 	}
 	SET_NETDEV_DEV(dev, gendev);
@@ -1100,9 +1100,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 
 	print_info = (vortex_debug > 1);
 	if (print_info)
-		printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
+		pr_info("See Documentation/networking/vortex.txt\n");
 
-	printk(KERN_INFO "%s: 3Com %s %s at %p.\n",
+	pr_info("%s: 3Com %s %s at %p.\n",
 	       print_name,
 	       pdev ? "PCI" : "EISA",
 	       vci->name,
@@ -1144,10 +1144,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 			   chip only. */
 			pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
 			if (pci_latency < new_latency) {
-				printk(KERN_INFO "%s: Overriding PCI latency"
-					" timer (CFLT) setting of %d, new value is %d.\n",
+				pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n",
 					print_name, pci_latency, new_latency);
-					pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
+				pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
 			}
 		}
 	}
@@ -1236,17 +1235,17 @@ static int __devinit vortex_probe1(struct device *gendev,
 		checksum = (checksum ^ (checksum >> 8)) & 0xff;
 	}
 	if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
-		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
 	for (i = 0; i < 3; i++)
 		((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 	if (print_info)
-		printk(" %pM", dev->dev_addr);
+		pr_cont(" %pM", dev->dev_addr);
 	/* Unfortunately an all zero eeprom passes the checksum and this
 	   gets found in the wild in failure cases. Crypto is hard 8) */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
 		retval = -EINVAL;
-		printk(KERN_ERR "*** EEPROM MAC address is invalid.\n");
+		pr_err("*** EEPROM MAC address is invalid.\n");
 		goto free_ring;	/* With every pack */
 	}
 	EL3WINDOW(2);
@@ -1254,17 +1253,17 @@ static int __devinit vortex_probe1(struct device *gendev,
 		iowrite8(dev->dev_addr[i], ioaddr + i);
 
 	if (print_info)
-		printk(", IRQ %d\n", dev->irq);
+		pr_cont(", IRQ %d\n", dev->irq);
 	/* Tell them about an invalid IRQ. */
 	if (dev->irq <= 0 || dev->irq >= nr_irqs)
-		printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
+		pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
 			   dev->irq);
 
 	EL3WINDOW(4);
 	step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
 	if (print_info) {
-		printk(KERN_INFO "  product code %02x%02x rev %02x.%d date %02d-"
-			"%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
+		pr_info("  product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n",
+			eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
 			step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
 	}
 
@@ -1279,8 +1278,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		}
 
 		if (print_info) {
-			printk(KERN_INFO "%s: CardBus functions mapped "
-				"%16.16llx->%p\n",
+			pr_info("%s: CardBus functions mapped %16.16llx->%p\n",
 				print_name,
 				(unsigned long long)pci_resource_start(pdev, 2),
 				vp->cb_fn_base);
@@ -1307,7 +1305,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (vp->info1 & 0x8000) {
 		vp->full_duplex = 1;
 		if (print_info)
-			printk(KERN_INFO "Full duplex capable\n");
+			pr_info("Full duplex capable\n");
 	}
 
 	{
@@ -1319,9 +1317,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 			vp->available_media = 0x40;
 		config = ioread32(ioaddr + Wn3_Config);
 		if (print_info) {
-			printk(KERN_DEBUG "  Internal config register is %4.4x, "
-				   "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
-			printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+			pr_debug("  Internal config register is %4.4x, transceivers %#x.\n",
+				config, ioread16(ioaddr + Wn3_Options));
+			pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 				   8 << RAM_SIZE(config),
 				   RAM_WIDTH(config) ? "word" : "byte",
 				   ram_split[RAM_SPLIT(config)],
@@ -1336,7 +1334,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	}
 
 	if (vp->media_override != 7) {
-		printk(KERN_INFO "%s:  Media override to transceiver type %d (%s).\n",
+		pr_info("%s:  Media override to transceiver type %d (%s).\n",
 				print_name, vp->media_override,
 				media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
@@ -1369,8 +1367,8 @@ static int __devinit vortex_probe1(struct device *gendev,
 			if (mii_status  &&  mii_status != 0xffff) {
 				vp->phys[phy_idx++] = phyx;
 				if (print_info) {
-					printk(KERN_INFO "  MII transceiver found at address %d,"
-						" status %4x.\n", phyx, mii_status);
+					pr_info("  MII transceiver found at address %d, status %4x.\n",
+						phyx, mii_status);
 				}
 				if ((mii_status & 0x0040) == 0)
 					mii_preamble_required++;
@@ -1378,7 +1376,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		}
 		mii_preamble_required--;
 		if (phy_idx == 0) {
-			printk(KERN_WARNING"  ***WARNING*** No MII transceivers found!\n");
+			pr_warning("  ***WARNING*** No MII transceivers found!\n");
 			vp->phys[0] = 24;
 		} else {
 			vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
@@ -1394,7 +1392,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (vp->capabilities & CapBusMaster) {
 		vp->full_bus_master_tx = 1;
 		if (print_info) {
-			printk(KERN_INFO "  Enabling bus-master transmits and %s receives.\n",
+			pr_info("  Enabling bus-master transmits and %s receives.\n",
 			(vp->info2 & 1) ? "early" : "whole-frame" );
 		}
 		vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
@@ -1414,7 +1412,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		dev->netdev_ops =  &vortex_netdev_ops;
 
 	if (print_info) {
-		printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n",
+		pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
 				print_name,
 				(dev->features & NETIF_F_SG) ? "en":"dis",
 				(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
@@ -1442,7 +1440,7 @@ free_region:
 	if (vp->must_free_region)
 		release_region(dev->base_addr, vci->io_size);
 	free_netdev(dev);
-	printk(KERN_ERR PFX "vortex_probe1 fails.  Returns %d\n", retval);
+	pr_err(PFX "vortex_probe1 fails.  Returns %d\n", retval);
 out:
 	return retval;
 }
@@ -1464,13 +1462,13 @@ issue_and_wait(struct net_device *dev, int cmd)
 	for (i = 0; i < 100000; i++) {
 		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
 			if (vortex_debug > 1)
-				printk(KERN_INFO "%s: command 0x%04x took %d usecs\n",
+				pr_info("%s: command 0x%04x took %d usecs\n",
 					   dev->name, cmd, i * 10);
 			return;
 		}
 		udelay(10);
 	}
-	printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n",
+	pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
 			   dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
 }
 
@@ -1480,7 +1478,7 @@ vortex_set_duplex(struct net_device *dev)
 	struct vortex_private *vp = netdev_priv(dev);
 	void __iomem *ioaddr = vp->ioaddr;
 
-	printk(KERN_INFO "%s:  setting %s-duplex.\n",
+	pr_info("%s:  setting %s-duplex.\n",
 		dev->name, (vp->full_duplex) ? "full" : "half");
 
 	EL3WINDOW(3);
@@ -1522,7 +1520,7 @@ vortex_up(struct net_device *dev)
 			pci_restore_state(VORTEX_PCI(vp));
 		err = pci_enable_device(VORTEX_PCI(vp));
 		if (err) {
-			printk(KERN_WARNING "%s: Could not enable device \n",
+			pr_warning("%s: Could not enable device\n",
 				dev->name);
 			goto err_out;
 		}
@@ -1533,14 +1531,14 @@ vortex_up(struct net_device *dev)
 	config = ioread32(ioaddr + Wn3_Config);
 
 	if (vp->media_override != 7) {
-		printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+		pr_info("%s: Media override to transceiver %d (%s).\n",
 			   dev->name, vp->media_override,
 			   media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
 	} else if (vp->autoselect) {
 		if (vp->has_nway) {
 			if (vortex_debug > 1)
-				printk(KERN_INFO "%s: using NWAY device table, not %d\n",
+				pr_info("%s: using NWAY device table, not %d\n",
 								dev->name, dev->if_port);
 			dev->if_port = XCVR_NWAY;
 		} else {
@@ -1549,13 +1547,13 @@ vortex_up(struct net_device *dev)
 			while (! (vp->available_media & media_tbl[dev->if_port].mask))
 				dev->if_port = media_tbl[dev->if_port].next;
 			if (vortex_debug > 1)
-				printk(KERN_INFO "%s: first available media type: %s\n",
+				pr_info("%s: first available media type: %s\n",
 					dev->name, media_tbl[dev->if_port].name);
 		}
 	} else {
 		dev->if_port = vp->default_media;
 		if (vortex_debug > 1)
-			printk(KERN_INFO "%s: using default media %s\n",
+			pr_info("%s: using default media %s\n",
 				dev->name, media_tbl[dev->if_port].name);
 	}
 
@@ -1570,13 +1568,13 @@ vortex_up(struct net_device *dev)
 	vp->rx_oom_timer.function = rx_oom_timer;
 
 	if (vortex_debug > 1)
-		printk(KERN_DEBUG "%s: Initial media type %s.\n",
+		pr_debug("%s: Initial media type %s.\n",
 			   dev->name, media_tbl[dev->if_port].name);
 
 	vp->full_duplex = vp->mii.force_media;
 	config = BFINS(config, dev->if_port, 20, 4);
 	if (vortex_debug > 6)
-		printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
+		pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
 	iowrite32(config, ioaddr + Wn3_Config);
 
 	if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
@@ -1602,7 +1600,7 @@ vortex_up(struct net_device *dev)
 
 	if (vortex_debug > 1) {
 		EL3WINDOW(4);
-		printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n",
+		pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
 			   dev->name, dev->irq, ioread16(ioaddr + Wn4_Media));
 	}
 
@@ -1704,13 +1702,13 @@ vortex_open(struct net_device *dev)
 	/* Use the now-standard shared IRQ implementation. */
 	if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
 				&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
-		printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+		pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
 		goto err;
 	}
 
 	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
 		if (vortex_debug > 2)
-			printk(KERN_DEBUG "%s:  Filling in the Rx ring.\n", dev->name);
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			struct sk_buff *skb;
 			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
@@ -1728,7 +1726,7 @@ vortex_open(struct net_device *dev)
 		}
 		if (i != RX_RING_SIZE) {
 			int j;
-			printk(KERN_EMERG "%s: no memory for rx ring\n", dev->name);
+			pr_emerg("%s: no memory for rx ring\n", dev->name);
 			for (j = 0; j < i; j++) {
 				if (vp->rx_skbuff[j]) {
 					dev_kfree_skb(vp->rx_skbuff[j]);
@@ -1750,7 +1748,7 @@ err_free_irq:
 	free_irq(dev->irq, dev);
 err:
 	if (vortex_debug > 1)
-		printk(KERN_ERR "%s: vortex_open() fails: returning %d\n", dev->name, retval);
+		pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
 out:
 	return retval;
 }
@@ -1766,9 +1764,9 @@ vortex_timer(unsigned long data)
 	int media_status, old_window;
 
 	if (vortex_debug > 2) {
-		printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
 			   dev->name, media_tbl[dev->if_port].name);
-		printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+		pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
 	}
 
 	disable_irq_lockdep(dev->irq);
@@ -1781,12 +1779,12 @@ vortex_timer(unsigned long data)
 			netif_carrier_on(dev);
 			ok = 1;
 			if (vortex_debug > 1)
-				printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n",
+				pr_debug("%s: Media %s has link beat, %x.\n",
 					   dev->name, media_tbl[dev->if_port].name, media_status);
 		} else {
 			netif_carrier_off(dev);
 			if (vortex_debug > 1) {
-				printk(KERN_DEBUG "%s: Media %s has no link beat, %x.\n",
+				pr_debug("%s: Media %s has no link beat, %x.\n",
 					   dev->name, media_tbl[dev->if_port].name, media_status);
 			}
 		}
@@ -1802,7 +1800,7 @@ vortex_timer(unsigned long data)
 		break;
 	  default:					/* Other media types handled by Tx timeouts. */
 		if (vortex_debug > 1)
-		  printk(KERN_DEBUG "%s: Media %s has no indication, %x.\n",
+		  pr_debug("%s: Media %s has no indication, %x.\n",
 				 dev->name, media_tbl[dev->if_port].name, media_status);
 		ok = 1;
 	}
@@ -1822,13 +1820,11 @@ vortex_timer(unsigned long data)
 		if (dev->if_port == XCVR_Default) { /* Go back to default. */
 		  dev->if_port = vp->default_media;
 		  if (vortex_debug > 1)
-			printk(KERN_DEBUG "%s: Media selection failing, using default "
-				   "%s port.\n",
+			pr_debug("%s: Media selection failing, using default %s port.\n",
 				   dev->name, media_tbl[dev->if_port].name);
 		} else {
 			if (vortex_debug > 1)
-				printk(KERN_DEBUG "%s: Media selection failed, now trying "
-					   "%s port.\n",
+				pr_debug("%s: Media selection failed, now trying %s port.\n",
 					   dev->name, media_tbl[dev->if_port].name);
 			next_tick = media_tbl[dev->if_port].wait;
 		}
@@ -1843,13 +1839,13 @@ vortex_timer(unsigned long data)
 		iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
 			 ioaddr + EL3_CMD);
 		if (vortex_debug > 1)
-			printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
+			pr_debug("wrote 0x%08x to Wn3_Config\n", config);
 		/* AKPM: FIXME: Should reset Rx & Tx here.  P60 of 3c90xc.pdf */
 	}
 
 leave_media_alone:
 	if (vortex_debug > 2)
-	  printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
+	  pr_debug("%s: Media selection timer finished, %s.\n",
 			 dev->name, media_tbl[dev->if_port].name);
 
 	EL3WINDOW(old_window);
@@ -1865,21 +1861,21 @@ static void vortex_tx_timeout(struct net_device *dev)
 	struct vortex_private *vp = netdev_priv(dev);
 	void __iomem *ioaddr = vp->ioaddr;
 
-	printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+	pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
 		   dev->name, ioread8(ioaddr + TxStatus),
 		   ioread16(ioaddr + EL3_STATUS));
 	EL3WINDOW(4);
-	printk(KERN_ERR "  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+	pr_err("  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
 			ioread16(ioaddr + Wn4_NetDiag),
 			ioread16(ioaddr + Wn4_Media),
 			ioread32(ioaddr + PktStatus),
 			ioread16(ioaddr + Wn4_FIFODiag));
 	/* Slight code bloat to be user friendly. */
 	if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
-		printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
+		pr_err("%s: Transmitter encountered 16 collisions --"
 			   " network cable problem?\n", dev->name);
 	if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
-		printk(KERN_ERR "%s: Interrupt posted but not delivered --"
+		pr_err("%s: Interrupt posted but not delivered --"
 			   " IRQ blocked by another device?\n", dev->name);
 		/* Bad idea here.. but we might as well handle a few events. */
 		{
@@ -1903,7 +1899,7 @@ static void vortex_tx_timeout(struct net_device *dev)
 
 	dev->stats.tx_errors++;
 	if (vp->full_bus_master_tx) {
-		printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name);
+		pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
 		if (vp->cur_tx - vp->dirty_tx > 0  &&  ioread32(ioaddr + DownListPtr) == 0)
 			iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
 				 ioaddr + DownListPtr);
@@ -1938,7 +1934,7 @@ vortex_error(struct net_device *dev, int status)
 	unsigned char tx_status = 0;
 
 	if (vortex_debug > 2) {
-		printk(KERN_ERR "%s: vortex_error(), status=0x%x\n", dev->name, status);
+		pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
 	}
 
 	if (status & TxComplete) {			/* Really "TxError" for us. */
@@ -1946,10 +1942,10 @@ vortex_error(struct net_device *dev, int status)
 		/* Presumably a tx-timeout. We must merely re-enable. */
 		if (vortex_debug > 2
 			|| (tx_status != 0x88 && vortex_debug > 0)) {
-			printk(KERN_ERR "%s: Transmit error, Tx status register %2.2x.\n",
+			pr_err("%s: Transmit error, Tx status register %2.2x.\n",
 				   dev->name, tx_status);
 			if (tx_status == 0x82) {
-				printk(KERN_ERR "Probably a duplex mismatch.  See "
+				pr_err("Probably a duplex mismatch.  See "
 						"Documentation/networking/vortex.txt\n");
 			}
 			dump_tx_ring(dev);
@@ -1975,13 +1971,13 @@ vortex_error(struct net_device *dev, int status)
 	if (status & StatsFull) {			/* Empty statistics. */
 		static int DoneDidThat;
 		if (vortex_debug > 4)
-			printk(KERN_DEBUG "%s: Updating stats.\n", dev->name);
+			pr_debug("%s: Updating stats.\n", dev->name);
 		update_stats(ioaddr, dev);
 		/* HACK: Disable statistics as an interrupt source. */
 		/* This occurs when we have the wrong media type! */
 		if (DoneDidThat == 0  &&
 			ioread16(ioaddr + EL3_STATUS) & StatsFull) {
-			printk(KERN_WARNING "%s: Updating statistics failed, disabling "
+			pr_warning("%s: Updating statistics failed, disabling "
 				   "stats as an interrupt source.\n", dev->name);
 			EL3WINDOW(5);
 			iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
@@ -1998,7 +1994,7 @@ vortex_error(struct net_device *dev, int status)
 		u16 fifo_diag;
 		EL3WINDOW(4);
 		fifo_diag = ioread16(ioaddr + Wn4_FIFODiag);
-		printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
+		pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
 			   dev->name, fifo_diag);
 		/* Adapter failure requires Tx/Rx reset and reinit. */
 		if (vp->full_bus_master_tx) {
@@ -2006,7 +2002,7 @@ vortex_error(struct net_device *dev, int status)
 			/* 0x80000000 PCI master abort. */
 			/* 0x40000000 PCI target abort. */
 			if (vortex_debug)
-				printk(KERN_ERR "%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+				pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
 
 			/* In this case, blow the card away */
 			/* Must not enter D3 or we can't legally issue the reset! */
@@ -2075,7 +2071,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		while (--i > 0	&&	(tx_status = ioread8(ioaddr + TxStatus)) > 0) {
 			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
 				if (vortex_debug > 2)
-				  printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
+				  pr_debug("%s: Tx error, status %2.2x.\n",
 						 dev->name, tx_status);
 				if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
 				if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
@@ -2101,17 +2097,17 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
 	if (vortex_debug > 6) {
-		printk(KERN_DEBUG "boomerang_start_xmit()\n");
-		printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n",
+		pr_debug("boomerang_start_xmit()\n");
+		pr_debug("%s: Trying to send a packet, Tx index %d.\n",
 			   dev->name, vp->cur_tx);
 	}
 
 	if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
 		if (vortex_debug > 0)
-			printk(KERN_WARNING "%s: BUG! Tx Ring full, refusing to send buffer.\n",
+			pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
 				   dev->name);
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	vp->tx_skbuff[entry] = skb;
@@ -2204,7 +2200,7 @@ vortex_interrupt(int irq, void *dev_id)
 	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
-		printk("vortex_interrupt(). status=0x%4x\n", status);
+		pr_debug("vortex_interrupt(). status=0x%4x\n", status);
 
 	if ((status & IntLatch) == 0)
 		goto handler_exit;		/* No interrupt: shared IRQs cause this */
@@ -2219,19 +2215,19 @@ vortex_interrupt(int irq, void *dev_id)
 		goto handler_exit;
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
 			   dev->name, status, ioread8(ioaddr + Timer));
 
 	do {
 		if (vortex_debug > 5)
-				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
 					   dev->name, status);
 		if (status & RxComplete)
 			vortex_rx(dev);
 
 		if (status & TxAvailable) {
 			if (vortex_debug > 5)
-				printk(KERN_DEBUG "	TX room bit was handled.\n");
+				pr_debug("	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue (dev);
@@ -2263,8 +2259,8 @@ vortex_interrupt(int irq, void *dev_id)
 		}
 
 		if (--work_done < 0) {
-			printk(KERN_WARNING "%s: Too much work in interrupt, status "
-				   "%4.4x.\n", dev->name, status);
+			pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+				dev->name, status);
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
@@ -2281,7 +2277,7 @@ vortex_interrupt(int irq, void *dev_id)
 	} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
 			   dev->name, status);
 handler_exit:
 	spin_unlock(&vp->lock);
@@ -2313,14 +2309,14 @@ boomerang_interrupt(int irq, void *dev_id)
 	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
-		printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status);
+		pr_debug("boomerang_interrupt. status=0x%4x\n", status);
 
 	if ((status & IntLatch) == 0)
 		goto handler_exit;		/* No interrupt: shared IRQs can cause this */
 
 	if (status == 0xffff) {		/* h/w no longer present (hotplug)? */
 		if (vortex_debug > 1)
-			printk(KERN_DEBUG "boomerang_interrupt(1): status = 0xffff\n");
+			pr_debug("boomerang_interrupt(1): status = 0xffff\n");
 		goto handler_exit;
 	}
 
@@ -2330,16 +2326,16 @@ boomerang_interrupt(int irq, void *dev_id)
 	}
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
 			   dev->name, status, ioread8(ioaddr + Timer));
 	do {
 		if (vortex_debug > 5)
-				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
 					   dev->name, status);
 		if (status & UpComplete) {
 			iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
 			if (vortex_debug > 5)
-				printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n");
+				pr_debug("boomerang_interrupt->boomerang_rx\n");
 			boomerang_rx(dev);
 		}
 
@@ -2374,7 +2370,7 @@ boomerang_interrupt(int irq, void *dev_id)
 					dev_kfree_skb_irq(skb);
 					vp->tx_skbuff[entry] = NULL;
 				} else {
-					printk(KERN_DEBUG "boomerang_interrupt: no skb!\n");
+					pr_debug("boomerang_interrupt: no skb!\n");
 				}
 				/* dev->stats.tx_packets++;  Counted below. */
 				dirty_tx++;
@@ -2382,7 +2378,7 @@ boomerang_interrupt(int irq, void *dev_id)
 			vp->dirty_tx = dirty_tx;
 			if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
 				if (vortex_debug > 6)
-					printk(KERN_DEBUG "boomerang_interrupt: wake queue\n");
+					pr_debug("boomerang_interrupt: wake queue\n");
 				netif_wake_queue (dev);
 			}
 		}
@@ -2392,8 +2388,8 @@ boomerang_interrupt(int irq, void *dev_id)
 			vortex_error(dev, status);
 
 		if (--work_done < 0) {
-			printk(KERN_WARNING "%s: Too much work in interrupt, status "
-				   "%4.4x.\n", dev->name, status);
+			pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+				dev->name, status);
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
@@ -2413,7 +2409,7 @@ boomerang_interrupt(int irq, void *dev_id)
 	} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
 			   dev->name, status);
 handler_exit:
 	spin_unlock(&vp->lock);
@@ -2428,13 +2424,13 @@ static int vortex_rx(struct net_device *dev)
 	short rx_status;
 
 	if (vortex_debug > 5)
-		printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+		pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
 			   ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
 	while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
 		if (rx_status & 0x4000) { /* Error, update stats. */
 			unsigned char rx_error = ioread8(ioaddr + RxErrors);
 			if (vortex_debug > 2)
-				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
 			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
@@ -2448,7 +2444,7 @@ static int vortex_rx(struct net_device *dev)
 
 			skb = dev_alloc_skb(pkt_len + 5);
 			if (vortex_debug > 4)
-				printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
@@ -2478,8 +2474,8 @@ static int vortex_rx(struct net_device *dev)
 						break;
 				continue;
 			} else if (vortex_debug > 0)
-				printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of "
-					   "size %d.\n", dev->name, pkt_len);
+				pr_notice("%s: No memory to allocate a sk_buff of size %d.\n",
+					dev->name, pkt_len);
 			dev->stats.rx_dropped++;
 		}
 		issue_and_wait(dev, RxDiscard);
@@ -2498,7 +2494,7 @@ boomerang_rx(struct net_device *dev)
 	int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
 
 	if (vortex_debug > 5)
-		printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+		pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
 
 	while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
 		if (--rx_work_limit < 0)
@@ -2506,7 +2502,7 @@ boomerang_rx(struct net_device *dev)
 		if (rx_status & RxDError) { /* Error, update stats. */
 			unsigned char rx_error = rx_status >> 16;
 			if (vortex_debug > 2)
-				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
 			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
@@ -2520,7 +2516,7 @@ boomerang_rx(struct net_device *dev)
 			dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
 
 			if (vortex_debug > 4)
-				printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
 
 			/* Check if the packet is long enough to just accept without
@@ -2566,7 +2562,7 @@ boomerang_rx(struct net_device *dev)
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
-					printk(KERN_WARNING "%s: memory shortage\n", dev->name);
+					pr_warning("%s: memory shortage\n", dev->name);
 					last_jif = jiffies;
 				}
 				if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
@@ -2598,7 +2594,7 @@ rx_oom_timer(unsigned long arg)
 	if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)	/* This test is redundant, but makes me feel good */
 		boomerang_rx(dev);
 	if (vortex_debug > 1) {
-		printk(KERN_DEBUG "%s: rx_oom_timer %s\n", dev->name,
+		pr_debug("%s: rx_oom_timer %s\n", dev->name,
 			((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying");
 	}
 	spin_unlock_irq(&vp->lock);
@@ -2655,9 +2651,9 @@ vortex_close(struct net_device *dev)
 		vortex_down(dev, 1);
 
 	if (vortex_debug > 1) {
-		printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+		pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
 			   dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
-		printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
+		pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
 			   " tx_queued %d Rx pre-checksummed %d.\n",
 			   dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
 	}
@@ -2666,8 +2662,7 @@ vortex_close(struct net_device *dev)
 	if (vp->rx_csumhits &&
 	    (vp->drv_flags & HAS_HWCKSM) == 0 &&
 	    (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
-			printk(KERN_WARNING "%s supports hardware checksums, and we're "
-						"not using them!\n", dev->name);
+		pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name);
 	}
 #endif
 
@@ -2717,16 +2712,16 @@ dump_tx_ring(struct net_device *dev)
 			int i;
 			int stalled = ioread32(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
 
-			printk(KERN_ERR "  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+			pr_err("  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
 					vp->full_bus_master_tx,
 					vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
 					vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
-			printk(KERN_ERR "  Transmit list %8.8x vs. %p.\n",
+			pr_err("  Transmit list %8.8x vs. %p.\n",
 				   ioread32(ioaddr + DownListPtr),
 				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
 			issue_and_wait(dev, DownStall);
 			for (i = 0; i < TX_RING_SIZE; i++) {
-				printk(KERN_ERR "  %d: @%p  length %8.8x status %8.8x\n", i,
+				pr_err("  %d: @%p  length %8.8x status %8.8x\n", i,
 					   &vp->tx_ring[i],
 #if DO_ZEROCOPY
 					   le32_to_cpu(vp->tx_ring[i].frag[0].length),
@@ -2970,7 +2965,7 @@ static void set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 		if (vortex_debug > 3)
-			printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
+			pr_notice("%s: Setting promiscuous mode.\n", dev->name);
 		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
 	} else	if ((dev->mc_list)  ||  (dev->flags & IFF_ALLMULTI)) {
 		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
@@ -3145,8 +3140,7 @@ static void acpi_set_WOL(struct net_device *dev)
 		iowrite16(RxEnable, ioaddr + EL3_CMD);
 
 		if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
-			printk(KERN_INFO "%s: WOL not supported.\n",
-					pci_name(VORTEX_PCI(vp)));
+			pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp)));
 
 			vp->enable_wol = 0;
 			return;
@@ -3164,7 +3158,7 @@ static void __devexit vortex_remove_one(struct pci_dev *pdev)
 	struct vortex_private *vp;
 
 	if (!dev) {
-		printk("vortex_remove_one called for Compaq device!\n");
+		pr_err("vortex_remove_one called for Compaq device!\n");
 		BUG();
 	}
 
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 7a331acc34a..69f5b7d298a 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -541,7 +541,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
         if (!TX_BUFFS_AVAIL)
-                return -1;
+                return NETDEV_TX_LOCKED;
 
 	netif_stop_queue (dev);
 
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 02330f3d5a5..50efde11ea6 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -471,8 +471,7 @@ static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
 			    u32 status, u32 len)
 {
 	if (netif_msg_rx_err (cp))
-		printk (KERN_DEBUG
-			"%s: rx err, slot %d status 0x%x len %d\n",
+		pr_debug("%s: rx err, slot %d status 0x%x len %d\n",
 			cp->dev->name, rx_tail, status, len);
 	cp->dev->stats.rx_errors++;
 	if (status & RxErrFrame)
@@ -547,7 +546,7 @@ rx_status_loop:
 		}
 
 		if (netif_msg_rx_status(cp))
-			printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d\n",
+			pr_debug("%s: rx slot %d status 0x%x len %d\n",
 			       dev->name, rx_tail, status, len);
 
 		buflen = cp->rx_buf_sz + NET_IP_ALIGN;
@@ -626,7 +625,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 		return IRQ_NONE;
 
 	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: intr, status %04x cmd %02x cpcmd %04x\n",
+		pr_debug("%s: intr, status %04x cmd %02x cpcmd %04x\n",
 		        dev->name, status, cpr8(Cmd), cpr16(CpCmd));
 
 	cpw16(IntrStatus, status & ~cp_rx_intr_mask);
@@ -658,7 +657,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 
 		pci_read_config_word(cp->pdev, PCI_STATUS, &pci_status);
 		pci_write_config_word(cp->pdev, PCI_STATUS, pci_status);
-		printk(KERN_ERR "%s: PCI bus error, status=%04x, PCI status=%04x\n",
+		pr_err("%s: PCI bus error, status=%04x, PCI status=%04x\n",
 		       dev->name, status, pci_status);
 
 		/* TODO: reset hardware */
@@ -705,7 +704,7 @@ static void cp_tx (struct cp_private *cp)
 		if (status & LastFrag) {
 			if (status & (TxError | TxFIFOUnder)) {
 				if (netif_msg_tx_err(cp))
-					printk(KERN_DEBUG "%s: tx err, status 0x%x\n",
+					pr_debug("%s: tx err, status 0x%x\n",
 					       cp->dev->name, status);
 				cp->dev->stats.tx_errors++;
 				if (status & TxOWC)
@@ -722,7 +721,7 @@ static void cp_tx (struct cp_private *cp)
 				cp->dev->stats.tx_packets++;
 				cp->dev->stats.tx_bytes += skb->len;
 				if (netif_msg_tx_done(cp))
-					printk(KERN_DEBUG "%s: tx done, slot %d\n", cp->dev->name, tx_tail);
+					pr_debug("%s: tx done, slot %d\n", cp->dev->name, tx_tail);
 			}
 			dev_kfree_skb_irq(skb);
 		}
@@ -755,9 +754,9 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&cp->lock, intr_flags);
-		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
+		pr_err(PFX "%s: BUG! Tx Ring full when queue awake!\n",
 		       dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 #if CP_VLAN_TAG_USED
@@ -882,7 +881,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	}
 	cp->tx_head = entry;
 	if (netif_msg_tx_queued(cp))
-		printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n",
+		pr_debug("%s: tx queued, slot %d, skblen %d\n",
 		       dev->name, entry, skb->len);
 	if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
 		netif_stop_queue(dev);
@@ -996,7 +995,7 @@ static void cp_reset_hw (struct cp_private *cp)
 		schedule_timeout_uninterruptible(10);
 	}
 
-	printk(KERN_ERR "%s: hardware reset timeout\n", cp->dev->name);
+	pr_err("%s: hardware reset timeout\n", cp->dev->name);
 }
 
 static inline void cp_start_hw (struct cp_private *cp)
@@ -1166,7 +1165,7 @@ static int cp_open (struct net_device *dev)
 	int rc;
 
 	if (netif_msg_ifup(cp))
-		printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
+		pr_debug("%s: enabling interface\n", dev->name);
 
 	rc = cp_alloc_rings(cp);
 	if (rc)
@@ -1201,7 +1200,7 @@ static int cp_close (struct net_device *dev)
 	napi_disable(&cp->napi);
 
 	if (netif_msg_ifdown(cp))
-		printk(KERN_DEBUG "%s: disabling interface\n", dev->name);
+		pr_debug("%s: disabling interface\n", dev->name);
 
 	spin_lock_irqsave(&cp->lock, flags);
 
@@ -1224,7 +1223,7 @@ static void cp_tx_timeout(struct net_device *dev)
 	unsigned long flags;
 	int rc;
 
-	printk(KERN_WARNING "%s: Transmit timeout, status %2x %4x %4x %4x\n",
+	pr_warning("%s: Transmit timeout, status %2x %4x %4x %4x\n",
 	       dev->name, cpr8(Cmd), cpr16(CpCmd),
 	       cpr16(IntrStatus), cpr16(IntrMask));
 
@@ -1873,7 +1872,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 #ifndef MODULE
 	static int version_printed;
 	if (version_printed++ == 0)
-		printk("%s", version);
+		pr_info("%s", version);
 #endif
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
@@ -1995,8 +1994,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto err_out_iomap;
 
-	printk (KERN_INFO "%s: RTL-8139C+ at 0x%lx, "
-		"%pM, IRQ %d\n",
+	pr_info("%s: RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
 		dev->name,
 		dev->base_addr,
 		dev->dev_addr,
@@ -2113,7 +2111,7 @@ static struct pci_driver cp_driver = {
 static int __init cp_init (void)
 {
 #ifdef MODULE
-	printk("%s", version);
+	pr_info("%s", version);
 #endif
 	return pci_register_driver(&cp_driver);
 }
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 1fc45431a62..8ae72ec1445 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -126,19 +126,12 @@
 #undef RTL8139_NDEBUG
 
 
-#if RTL8139_DEBUG
-/* note: prints function name for you */
-#  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
 #ifdef RTL8139_NDEBUG
 #  define assert(expr) do {} while (0)
 #else
 #  define assert(expr) \
         if(unlikely(!(expr))) {				        \
-        printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n",	\
+        pr_err("Assertion failed! %s,%s,%s,line=%d\n",	\
 	#expr, __FILE__, __func__, __LINE__);			\
         }
 #endif
@@ -784,8 +777,8 @@ static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
 
 	/* set this immediately, we need to know before
 	 * we talk to the chip directly */
-	DPRINTK("PIO region size == 0x%02X\n", pio_len);
-	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+	pr_debug("PIO region size == 0x%02lX\n", pio_len);
+	pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
 
 retry:
 	if (use_io) {
@@ -865,19 +858,17 @@ retry:
 		}
 
 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	dev_printk (KERN_DEBUG, &pdev->dev,
-		    "unknown chip version, assuming RTL-8139\n");
-	dev_printk (KERN_DEBUG, &pdev->dev,
-		    "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+	dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+	dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
 	tp->chipset = 0;
 
 match:
-	DPRINTK ("chipset id (%d) == index %d, '%s'\n",
+	pr_debug("chipset id (%d) == index %d, '%s'\n",
 		 version, i, rtl_chip_info[i].name);
 
 	if (tp->chipset >= CH_8139B) {
 		u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
-		DPRINTK("PCI PM wakeup\n");
+		pr_debug("PCI PM wakeup\n");
 		if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
 		    (tmp8 & LWAKE))
 			new_tmp8 &= ~LWAKE;
@@ -896,7 +887,7 @@ match:
 			}
 		}
 	} else {
-		DPRINTK("Old chip wakeup\n");
+		pr_debug("Old chip wakeup\n");
 		tmp8 = RTL_R8 (Config1);
 		tmp8 &= ~(SLEEP | PWRDN);
 		RTL_W8 (Config1, tmp8);
@@ -949,7 +940,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	{
 		static int printed_version;
 		if (!printed_version++)
-			printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+			pr_info(RTL8139_DRIVER_NAME "\n");
 	}
 #endif
 
@@ -965,7 +956,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
 	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
 	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
-		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
 		use_io = 1;
 	}
 
@@ -1018,21 +1009,20 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	tp->mii.reg_num_mask = 0x1f;
 
 	/* dev is fully set up and ready to use now */
-	DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
+	pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
 	i = register_netdev (dev);
 	if (i) goto err_out;
 
 	pci_set_drvdata (pdev, dev);
 
-	printk (KERN_INFO "%s: %s at 0x%lx, "
-		"%pM, IRQ %d\n",
+	pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
 		dev->name,
 		board_info[ent->driver_data].name,
 		dev->base_addr,
 		dev->dev_addr,
 		dev->irq);
 
-	printk (KERN_DEBUG "%s:  Identified 8139 chip type '%s'\n",
+	pr_debug("%s:  Identified 8139 chip type '%s'\n",
 		dev->name, rtl_chip_info[tp->chipset].name);
 
 	/* Find the connected MII xcvrs.
@@ -1046,14 +1036,12 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 				u16 advertising = mdio_read(dev, phy, 4);
 				tp->phys[phy_idx++] = phy;
-				printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
-					   "advertising %4.4x.\n",
+				pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
 					   dev->name, phy, mii_status, advertising);
 			}
 		}
 		if (phy_idx == 0) {
-			printk(KERN_INFO "%s: No MII transceivers found!  Assuming SYM "
-				   "transceiver.\n",
+			pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
 				   dev->name);
 			tp->phys[0] = 32;
 		}
@@ -1073,13 +1061,13 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
 		tp->mii.full_duplex = full_duplex[board_idx];
 	if (tp->mii.full_duplex) {
-		printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
+		pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
 		/* Changing the MII-advertised media because might prevent
 		   re-connection. */
 		tp->mii.force_media = 1;
 	}
 	if (tp->default_port) {
-		printk(KERN_INFO "  Forcing %dMbps %s-duplex operation.\n",
+		pr_info("  Forcing %dMbps %s-duplex operation.\n",
 			   (option & 0x20 ? 100 : 10),
 			   (option & 0x10 ? "full" : "half"));
 		mdio_write(dev, tp->phys[0], 0,
@@ -1342,7 +1330,7 @@ static int rtl8139_open (struct net_device *dev)
 	netif_start_queue (dev);
 
 	if (netif_msg_ifup(tp))
-		printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
+		pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
 			" GP Pins %2.2x %s-duplex.\n", dev->name,
 			(unsigned long long)pci_resource_start (tp->pci_dev, 1),
 			dev->irq, RTL_R8 (MediaStatus),
@@ -1404,7 +1392,7 @@ static void rtl8139_hw_start (struct net_device *dev)
 		RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
 	}
 
-	DPRINTK("init buffer addresses\n");
+	pr_debug("init buffer addresses\n");
 
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1566,14 +1554,13 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
 			tp->mii.full_duplex = duplex;
 
 			if (mii_lpa) {
-				printk (KERN_INFO
-					"%s: Setting %s-duplex based on MII #%d link"
+				pr_info("%s: Setting %s-duplex based on MII #%d link"
 					" partner ability of %4.4x.\n",
 					dev->name,
 					tp->mii.full_duplex ? "full" : "half",
 					tp->phys[0], mii_lpa);
 			} else {
-				printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
+				pr_info("%s: media is unconnected, link down, or incompatible connection\n",
 				       dev->name);
 			}
 #if 0
@@ -1588,11 +1575,11 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
 
 	rtl8139_tune_twister (dev, tp);
 
-	DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
+	pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
 		 dev->name, RTL_R16 (NWayLPAR));
-	DPRINTK ("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
+	pr_debug("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
 		 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
-	DPRINTK ("%s:  Chip config %2.2x %2.2x.\n",
+	pr_debug("%s:  Chip config %2.2x %2.2x.\n",
 		 dev->name, RTL_R8 (Config0),
 		 RTL_R8 (Config1));
 }
@@ -1652,14 +1639,14 @@ static void rtl8139_tx_timeout_task (struct work_struct *work)
 	int i;
 	u8 tmp8;
 
-	printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
-		"media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
+	pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+		dev->name, RTL_R8 (ChipCmd),
 		RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
 	/* Emit info to figure out what went wrong. */
-	printk (KERN_DEBUG "%s: Tx queue start entry %ld  dirty entry %ld.\n",
+	pr_debug("%s: Tx queue start entry %ld  dirty entry %ld.\n",
 		dev->name, tp->cur_tx, tp->dirty_tx);
 	for (i = 0; i < NUM_TX_DESC; i++)
-		printk (KERN_DEBUG "%s:  Tx descriptor %d is %8.8lx.%s\n",
+		pr_debug("%s:  Tx descriptor %d is %8.8lx.%s\n",
 			dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
 			i == tp->dirty_tx % NUM_TX_DESC ?
 				" (queue head)" : "");
@@ -1741,7 +1728,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&tp->lock, flags);
 
 	if (netif_msg_tx_queued(tp))
-		printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
+		pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
 			dev->name, len, entry);
 
 	return 0;
@@ -1772,7 +1759,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
 		if (txstatus & (TxOutOfWindow | TxAborted)) {
 			/* There was an major error, log it. */
 			if (netif_msg_tx_err(tp))
-				printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+				pr_debug("%s: Transmit error, Tx status %8.8x.\n",
 					dev->name, txstatus);
 			dev->stats.tx_errors++;
 			if (txstatus & TxAborted) {
@@ -1803,7 +1790,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
 
 #ifndef RTL8139_NDEBUG
 	if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
-		printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+		pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
 		        dev->name, dirty_tx, tp->cur_tx);
 		dirty_tx += NUM_TX_DESC;
 	}
@@ -1828,12 +1815,12 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 #endif
 
 	if (netif_msg_rx_err (tp))
-		printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
+		pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
 			dev->name, rx_status);
 	dev->stats.rx_errors++;
 	if (!(rx_status & RxStatusOK)) {
 		if (rx_status & RxTooLong) {
-			DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
+			pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
 			 	dev->name, rx_status);
 			/* A.C.: The chip hangs here. */
 		}
@@ -1866,7 +1853,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 			break;
 	}
 	if (tmp_work <= 0)
-		printk (KERN_WARNING PFX "rx stop wait too long\n");
+		pr_warning(PFX "rx stop wait too long\n");
 	/* restart receive */
 	tmp_work = 200;
 	while (--tmp_work > 0) {
@@ -1877,7 +1864,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 			break;
 	}
 	if (tmp_work <= 0)
-		printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+		pr_warning(PFX "tx/rx enable wait too long\n");
 
 	/* and reinitialize all rx related registers */
 	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
@@ -1888,7 +1875,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 	RTL_W32 (RxConfig, tp->rx_config);
 	tp->cur_rx = 0;
 
-	DPRINTK("init buffer addresses\n");
+	pr_debug("init buffer addresses\n");
 
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1942,7 +1929,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 	unsigned int cur_rx = tp->cur_rx;
 	unsigned int rx_size = 0;
 
-	DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+	pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
 		 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
@@ -1962,17 +1949,17 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 		pkt_size = rx_size - 4;
 
 		if (netif_msg_rx_status(tp))
-			printk(KERN_DEBUG "%s:  rtl8139_rx() status %4.4x, size %4.4x,"
+			pr_debug("%s:  rtl8139_rx() status %4.4x, size %4.4x,"
 				" cur %4.4x.\n", dev->name, rx_status,
 			 rx_size, cur_rx);
 #if RTL8139_DEBUG > 2
 		{
 			int i;
-			DPRINTK ("%s: Frame contents ", dev->name);
+			pr_debug("%s: Frame contents ", dev->name);
 			for (i = 0; i < 70; i++)
-				printk (" %2.2x",
+				pr_cont(" %2.2x",
 					rx_ring[ring_offset + i]);
-			printk (".\n");
+			pr_cont(".\n");
 		}
 #endif
 
@@ -1984,12 +1971,12 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 			if (!tp->fifo_copy_timeout)
 				tp->fifo_copy_timeout = jiffies + 2;
 			else if (time_after(jiffies, tp->fifo_copy_timeout)) {
-				DPRINTK ("%s: hung FIFO. Reset.", dev->name);
+				pr_debug("%s: hung FIFO. Reset.", dev->name);
 				rx_size = 0;
 				goto no_early_rx;
 			}
 			if (netif_msg_intr(tp)) {
-				printk(KERN_DEBUG "%s: fifo copy in progress.",
+				pr_debug("%s: fifo copy in progress.",
 				       dev->name);
 			}
 			tp->xstats.early_rx++;
@@ -2033,8 +2020,7 @@ no_early_rx:
 			netif_receive_skb (skb);
 		} else {
 			if (net_ratelimit())
-				printk (KERN_WARNING
-					"%s: Memory squeeze, dropping packet.\n",
+				pr_warning("%s: Memory squeeze, dropping packet.\n",
 					dev->name);
 			dev->stats.rx_dropped++;
 		}
@@ -2049,12 +2035,10 @@ no_early_rx:
 	if (unlikely(!received || rx_size == 0xfff0))
 		rtl8139_isr_ack(tp);
 
-#if RTL8139_DEBUG > 1
-	DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+	pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
 		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
-#endif
 
 	tp->cur_rx = cur_rx;
 
@@ -2075,7 +2059,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
 				     void __iomem *ioaddr,
 				     int status, int link_changed)
 {
-	DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
+	pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
 		 dev->name, status);
 
 	assert (dev != NULL);
@@ -2104,7 +2088,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
 		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
 		pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
 
-		printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
+		pr_err("%s: PCI Bus error %4.4x.\n",
 			dev->name, pci_cmd_status);
 	}
 }
@@ -2198,7 +2182,7 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
  out:
 	spin_unlock (&tp->lock);
 
-	DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
+	pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
 		 dev->name, RTL_R16 (IntrStatus));
 	return IRQ_RETVAL(handled);
 }
@@ -2249,7 +2233,7 @@ static int rtl8139_close (struct net_device *dev)
 	napi_disable(&tp->napi);
 
 	if (netif_msg_ifdown(tp))
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
+		pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
 			dev->name, RTL_R16 (IntrStatus));
 
 	spin_lock_irqsave (&tp->lock, flags);
@@ -2292,11 +2276,11 @@ static int rtl8139_close (struct net_device *dev)
    other threads or interrupts aren't messing with the 8139.  */
 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	void __iomem *ioaddr = np->mmio_addr;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 
-	spin_lock_irq(&np->lock);
-	if (rtl_chip_info[np->chipset].flags & HasLWake) {
+	spin_lock_irq(&tp->lock);
+	if (rtl_chip_info[tp->chipset].flags & HasLWake) {
 		u8 cfg3 = RTL_R8 (Config3);
 		u8 cfg5 = RTL_R8 (Config5);
 
@@ -2317,7 +2301,7 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 		if (cfg5 & Cfg5_BWF)
 			wol->wolopts |= WAKE_BCAST;
 	}
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irq(&tp->lock);
 }
 
 
@@ -2326,19 +2310,19 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
    aren't messing with the 8139.  */
 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	void __iomem *ioaddr = np->mmio_addr;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 	u32 support;
 	u8 cfg3, cfg5;
 
-	support = ((rtl_chip_info[np->chipset].flags & HasLWake)
+	support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
 		   ? (WAKE_PHY | WAKE_MAGIC
 		      | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
 		   : 0);
 	if (wol->wolopts & ~support)
 		return -EINVAL;
 
-	spin_lock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
 	cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
 	if (wol->wolopts & WAKE_PHY)
 		cfg3 |= Cfg3_LinkUp;
@@ -2359,87 +2343,87 @@ static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & WAKE_BCAST)
 		cfg5 |= Cfg5_BWF;
 	RTL_W8 (Config5, cfg5);	/* need not unlock via Cfg9346 */
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irq(&tp->lock);
 
 	return 0;
 }
 
 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 	strcpy(info->driver, DRV_NAME);
 	strcpy(info->version, DRV_VERSION);
-	strcpy(info->bus_info, pci_name(np->pci_dev));
-	info->regdump_len = np->regs_len;
+	strcpy(info->bus_info, pci_name(tp->pci_dev));
+	info->regdump_len = tp->regs_len;
 }
 
 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	spin_lock_irq(&np->lock);
-	mii_ethtool_gset(&np->mii, cmd);
-	spin_unlock_irq(&np->lock);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	spin_lock_irq(&tp->lock);
+	mii_ethtool_gset(&tp->mii, cmd);
+	spin_unlock_irq(&tp->lock);
 	return 0;
 }
 
 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 	int rc;
-	spin_lock_irq(&np->lock);
-	rc = mii_ethtool_sset(&np->mii, cmd);
-	spin_unlock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
+	rc = mii_ethtool_sset(&tp->mii, cmd);
+	spin_unlock_irq(&tp->lock);
 	return rc;
 }
 
 static int rtl8139_nway_reset(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	return mii_nway_restart(&np->mii);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	return mii_nway_restart(&tp->mii);
 }
 
 static u32 rtl8139_get_link(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	return mii_link_ok(&np->mii);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	return mii_link_ok(&tp->mii);
 }
 
 static u32 rtl8139_get_msglevel(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	return np->msg_enable;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	return tp->msg_enable;
 }
 
 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	np->msg_enable = datum;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	tp->msg_enable = datum;
 }
 
 static int rtl8139_get_regs_len(struct net_device *dev)
 {
-	struct rtl8139_private *np;
+	struct rtl8139_private *tp;
 	/* TODO: we are too slack to do reg dumping for pio, for now */
 	if (use_io)
 		return 0;
-	np = netdev_priv(dev);
-	return np->regs_len;
+	tp = netdev_priv(dev);
+	return tp->regs_len;
 }
 
 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
 {
-	struct rtl8139_private *np;
+	struct rtl8139_private *tp;
 
 	/* TODO: we are too slack to do reg dumping for pio, for now */
 	if (use_io)
 		return;
-	np = netdev_priv(dev);
+	tp = netdev_priv(dev);
 
 	regs->version = RTL_REGS_VER;
 
-	spin_lock_irq(&np->lock);
-	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
-	spin_unlock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
+	memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+	spin_unlock_irq(&tp->lock);
 }
 
 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
@@ -2454,12 +2438,12 @@ static int rtl8139_get_sset_count(struct net_device *dev, int sset)
 
 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 
-	data[0] = np->xstats.early_rx;
-	data[1] = np->xstats.tx_buf_mapped;
-	data[2] = np->xstats.tx_timeouts;
-	data[3] = np->xstats.rx_lost_in_ring;
+	data[0] = tp->xstats.early_rx;
+	data[1] = tp->xstats.tx_buf_mapped;
+	data[2] = tp->xstats.tx_timeouts;
+	data[3] = tp->xstats.rx_lost_in_ring;
 }
 
 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
@@ -2486,15 +2470,15 @@ static const struct ethtool_ops rtl8139_ethtool_ops = {
 
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 	int rc;
 
 	if (!netif_running(dev))
 		return -EINVAL;
 
-	spin_lock_irq(&np->lock);
-	rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
-	spin_unlock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
+	rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+	spin_unlock_irq(&tp->lock);
 
 	return rc;
 }
@@ -2527,7 +2511,7 @@ static void __set_rx_mode (struct net_device *dev)
 	int i, rx_mode;
 	u32 tmp;
 
-	DPRINTK ("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+	pr_debug("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
 			dev->name, dev->flags, RTL_R32 (RxConfig));
 
 	/* Note: do not reorder, GCC is clever about common statements. */
@@ -2643,7 +2627,7 @@ static int __init rtl8139_init_module (void)
 	 * even if no 8139 board is found.
 	 */
 #ifdef MODULE
-	printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+	pr_info(RTL8139_DRIVER_NAME "\n");
 #endif
 
 	return pci_register_driver(&rtl8139_pci_driver);
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index cca94b9c08a..77547545509 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -122,13 +122,13 @@ static char version[] __initdata =
 #define ISCP_BUSY	0x00010000
 #define MACH_IS_APRICOT	0
 #else
-#define WSWAPrfd(x)     ((struct i596_rfd *)(x))
-#define WSWAPrbd(x)     ((struct i596_rbd *)(x))
-#define WSWAPiscp(x)    ((struct i596_iscp *)(x))
-#define WSWAPscb(x)     ((struct i596_scb *)(x))
-#define WSWAPcmd(x)     ((struct i596_cmd *)(x))
-#define WSWAPtbd(x)     ((struct i596_tbd *)(x))
-#define WSWAPchar(x)    ((char *)(x))
+#define WSWAPrfd(x)     ((struct i596_rfd *)((long)x))
+#define WSWAPrbd(x)     ((struct i596_rbd *)((long)x))
+#define WSWAPiscp(x)    ((struct i596_iscp *)((long)x))
+#define WSWAPscb(x)     ((struct i596_scb *)((long)x))
+#define WSWAPcmd(x)     ((struct i596_cmd *)((long)x))
+#define WSWAPtbd(x)     ((struct i596_tbd *)((long)x))
+#define WSWAPchar(x)    ((char *)((long)x))
 #define ISCP_BUSY	0x0001
 #define MACH_IS_APRICOT	1
 #endif
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index ec3e22e6306..21153dea8eb 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -74,14 +74,8 @@ EXPORT_SYMBOL(ei_netdev_ops);
 struct net_device *__alloc_ei_netdev(int size)
 {
 	struct net_device *dev = ____alloc_ei_netdev(size);
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	if (dev) {
-		dev->hard_start_xmit = ei_start_xmit;
-		dev->get_stats	= ei_get_stats;
-		dev->set_multicast_list = ei_set_multicast_list;
-		dev->tx_timeout = ei_tx_timeout;
-	}
-#endif
+	if (dev)
+		dev->netdev_ops = &ei_netdev_ops;
 	return dev;
 }
 EXPORT_SYMBOL(__alloc_ei_netdev);
diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c
index da863c91d1d..d225c291fd9 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/8390p.c
@@ -79,14 +79,8 @@ EXPORT_SYMBOL(eip_netdev_ops);
 struct net_device *__alloc_eip_netdev(int size)
 {
 	struct net_device *dev = ____alloc_ei_netdev(size);
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	if (dev) {
-		dev->hard_start_xmit = eip_start_xmit;
-		dev->get_stats	= eip_get_stats;
-		dev->set_multicast_list = eip_set_multicast_list;
-		dev->tx_timeout = eip_tx_timeout;
-	}
-#endif
+	if (dev)
+		dev->netdev_ops = &eip_netdev_ops;
 	return dev;
 }
 EXPORT_SYMBOL(__alloc_eip_netdev);
@@ -97,16 +91,15 @@ void NS8390p_init(struct net_device *dev, int startp)
 }
 EXPORT_SYMBOL(NS8390p_init);
 
-#if defined(MODULE)
-
-int init_module(void)
+static int __init NS8390p_init_module(void)
 {
 	return 0;
 }
 
-void cleanup_module(void)
+static void __exit NS8390p_cleanup_module(void)
 {
 }
 
-#endif /* MODULE */
+module_init(NS8390p_init_module);
+module_exit(NS8390p_cleanup_module);
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d1ef7..01f282cd098 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1,4 +1,3 @@
-
 #
 # Network device configuration
 #
@@ -26,15 +25,6 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config COMPAT_NET_DEV_OPS
-       default y
-       bool "Enable older network device API compatibility"
-       ---help---
-          This option enables kernel compatibility with older network devices
-          that do not use net_device_ops interface.
-
-	  If unsure, say Y.
-
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
@@ -526,15 +516,16 @@ config STNIC
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
-		 CPU_SUBTYPE_SH7619)
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
+		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
+		 CPU_SUBTYPE_SH7724)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710, SH7712, SH7763 and SH7619.
+	  This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
 
 config SUNLANCE
 	tristate "Sun LANCE support"
@@ -927,6 +918,16 @@ config NET_NETX
 	  To compile this driver as a module, choose M here. The module
 	  will be called netx-eth.
 
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ARCH_DAVINCI
+	select PHYLIB
+	help
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
 config DM9000
 	tristate "DM9000 support"
 	depends on ARM || BLACKFIN || MIPS
@@ -1000,7 +1001,7 @@ config SMC911X
 
 config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH
+	depends on ARM || SUPERH || BLACKFIN
 	select CRC32
 	select MII
 	select PHYLIB
@@ -1722,6 +1723,11 @@ config TLAN
 
 	  Please email feedback to <torben.mathiasen@compaq.com>.
 
+config KS8842
+	tristate "Micrel KSZ8842"
+	help
+	  This platform driver is for Micrel KSZ8842 chip.
+
 config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on NET_PCI && PCI
@@ -1858,8 +1864,8 @@ config 68360_ENET
 	  the Motorola 68360 processor.
 
 config FEC
-	bool "FEC ethernet controller (of ColdFire CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
+	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
@@ -1880,7 +1886,7 @@ config FEC_MPC52xx
 	---help---
 	  This option enables support for the MPC5200's on-chip
 	  Fast Ethernet Controller
-	  If compiled as module, it will be called 'fec_mpc52xx.ko'.
+	  If compiled as module, it will be called fec_mpc52xx.
 
 config FEC_MPC52xx_MDIO
 	bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1898,7 @@ config FEC_MPC52xx_MDIO
 	  (Motorola? industry standard).
 	  If your board uses an external PHY connected to FEC, enable this.
 	  If not sure, enable.
-	  If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+	  If compiled as module, it will be called fec_mpc52xx_phy.
 
 config NE_H8300
 	tristate "NE2000 compatible support for H8/300"
@@ -2264,6 +2270,17 @@ config BNX2
 	  To compile this driver as a module, choose M here: the module
 	  will be called bnx2.  This is recommended.
 
+config CNIC
+	tristate "Broadcom CNIC support"
+	depends on BNX2
+	depends on UIO
+	help
+	  This driver supports offload features of Broadcom NetXtremeII
+	  gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
 	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
@@ -2351,7 +2368,7 @@ config UGETH_TX_ON_DEMAND
 
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
+	depends on MV64X60 || PPC32 || PLAT_ORION
 	select INET_LRO
 	select PHYLIB
 	help
@@ -2362,6 +2379,14 @@ config MV643XX_ETH
 	  Some boards that use the Discovery chipset are the Momenco
 	  Ocelot C and Jaguar ATX and Pegasos II.
 
+config XILINX_LL_TEMAC
+	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+	select PHYLIB
+	depends on PPC_DCR_NATIVE
+	help
+	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+	  core used in Xilinx Spartan and Virtex FPGAs
+
 config QLA3XXX
 	tristate "QLogic QLA3XXX Network Driver Support"
 	depends on PCI
@@ -2435,10 +2460,14 @@ menuconfig NETDEV_10000
 
 if NETDEV_10000
 
+config MDIO
+	tristate
+
 config CHELSIO_T1
         tristate "Chelsio 10Gb Ethernet support"
         depends on PCI
 	select CRC32
+	select MDIO
         help
           This driver supports Chelsio gigabit and 10-gigabit
           Ethernet cards. More information about adapter features and
@@ -2471,6 +2500,7 @@ config CHELSIO_T3
 	tristate "Chelsio Communications T3 10Gb Ethernet support"
 	depends on CHELSIO_T3_DEPENDS
 	select FW_LOADER
+	select MDIO
 	help
 	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 	  adapters.
@@ -2506,6 +2536,7 @@ config ENIC
 config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
 	depends on PCI && INET
+	select MDIO
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -2668,6 +2699,7 @@ config TEHUTI
 config BNX2X
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
+	select FW_LOADER
 	select ZLIB_INFLATE
 	select LIBCRC32C
 	help
@@ -2704,6 +2736,8 @@ source "drivers/net/wan/Kconfig"
 
 source "drivers/atm/Kconfig"
 
+source "drivers/ieee802154/Kconfig"
+
 source "drivers/s390/net/Kconfig"
 
 config XEN_NETDEV_FRONTEND
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a1c25cb4669..d366fb2b40e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_E1000E) += e1000e/
 obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
@@ -73,6 +75,7 @@ obj-$(CONFIG_STNIC) += stnic.o 8390.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
 obj-$(CONFIG_BNX2X) += bnx2x.o
 bnx2x-objs := bnx2x_main.o bnx2x_link.o
 spidernet-y += spider_net.o spider_net_ethtool.o
@@ -84,6 +87,7 @@ obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
+obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
@@ -95,6 +99,7 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 #
 
 obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
 obj-$(CONFIG_PHYLIB) += phy/
 
 obj-$(CONFIG_SUNDANCE) += sundance.o
@@ -134,6 +139,8 @@ obj-$(CONFIG_AX88796) += ax88796.o
 
 obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_QLA3XXX) += qla3xxx.o
 obj-$(CONFIG_QLGE) += qlge/
 
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 02f64d57864..85a18175730 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -564,7 +564,7 @@ static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 	if (!TX_BUFFS_AVAIL){
 		local_irq_restore(flags);
-		return -1;
+		return NETDEV_TX_LOCKED;
 	}
 
 #ifdef DEBUG_DRIVER
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 57bc7152785..08419ee1029 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -2573,7 +2573,6 @@ restart:
 			netif_wake_queue(dev);
 	}
 
-	dev->trans_start = jiffies;
 	return NETDEV_TX_OK;
 
 overflow:
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index da64ba88d7f..78cea5e80b1 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -39,6 +39,7 @@
 static const char version[] = KERN_INFO "ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>\n";
 
 static struct ipddp_route *ipddp_route_list;
+static DEFINE_SPINLOCK(ipddp_route_lock);
 
 #ifdef CONFIG_IPDDP_ENCAP
 static int ipddp_mode = IPDDP_ENCAP;
@@ -50,7 +51,7 @@ static int ipddp_mode = IPDDP_DECAP;
 static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev);
 static int ipddp_create(struct ipddp_route *new_rt);
 static int ipddp_delete(struct ipddp_route *rt);
-static struct ipddp_route* ipddp_find_route(struct ipddp_route *rt);
+static struct ipddp_route* __ipddp_find_route(struct ipddp_route *rt);
 static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
 static const struct net_device_ops ipddp_netdev_ops = {
@@ -71,6 +72,7 @@ static struct net_device * __init ipddp_init(void)
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 	strcpy(dev->name, "ipddp%d");
 
 	if (version_printed++ == 0)
@@ -113,11 +115,13 @@ static struct net_device * __init ipddp_init(void)
  */
 static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	__be32 paddr = ((struct rtable*)skb->dst)->rt_gateway;
+	__be32 paddr = skb_rtable(skb)->rt_gateway;
         struct ddpehdr *ddp;
         struct ipddp_route *rt;
         struct atalk_addr *our_addr;
 
+	spin_lock(&ipddp_route_lock);
+
 	/*
          * Find appropriate route to use, based only on IP number.
          */
@@ -126,8 +130,10 @@ static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
                 if(rt->ip == paddr)
                         break;
         }
-        if(rt == NULL)
+        if(rt == NULL) {
+		spin_unlock(&ipddp_route_lock);
                 return 0;
+	}
 
         our_addr = atalk_find_dev_addr(rt->dev);
 
@@ -173,6 +179,8 @@ static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
         if(aarp_send_ddp(rt->dev, skb, &rt->at, NULL) < 0)
                 dev_kfree_skb(skb);
 
+	spin_unlock(&ipddp_route_lock);
+
         return 0;
 }
 
@@ -195,7 +203,9 @@ static int ipddp_create(struct ipddp_route *new_rt)
                 return -ENETUNREACH;
         }
 
-	if (ipddp_find_route(rt)) {
+	spin_lock_bh(&ipddp_route_lock);
+	if (__ipddp_find_route(rt)) {
+		spin_unlock_bh(&ipddp_route_lock);
 		kfree(rt);
 		return -EEXIST;
 	}
@@ -203,6 +213,8 @@ static int ipddp_create(struct ipddp_route *new_rt)
         rt->next = ipddp_route_list;
         ipddp_route_list = rt;
 
+	spin_unlock_bh(&ipddp_route_lock);
+
         return 0;
 }
 
@@ -215,6 +227,7 @@ static int ipddp_delete(struct ipddp_route *rt)
         struct ipddp_route **r = &ipddp_route_list;
         struct ipddp_route *tmp;
 
+	spin_lock_bh(&ipddp_route_lock);
         while((tmp = *r) != NULL)
         {
                 if(tmp->ip == rt->ip
@@ -222,19 +235,21 @@ static int ipddp_delete(struct ipddp_route *rt)
                         && tmp->at.s_node == rt->at.s_node)
                 {
                         *r = tmp->next;
+			spin_unlock_bh(&ipddp_route_lock);
                         kfree(tmp);
                         return 0;
                 }
                 r = &tmp->next;
         }
 
+	spin_unlock_bh(&ipddp_route_lock);
         return (-ENOENT);
 }
 
 /*
  * Find a routing entry, we only return a FULL match
  */
-static struct ipddp_route* ipddp_find_route(struct ipddp_route *rt)
+static struct ipddp_route* __ipddp_find_route(struct ipddp_route *rt)
 {
         struct ipddp_route *f;
 
@@ -252,7 +267,7 @@ static struct ipddp_route* ipddp_find_route(struct ipddp_route *rt)
 static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
         struct ipddp_route __user *rt = ifr->ifr_data;
-        struct ipddp_route rcp;
+        struct ipddp_route rcp, rcp2, *rp;
 
         if(!capable(CAP_NET_ADMIN))
                 return -EPERM;
@@ -266,9 +281,19 @@ static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
                         return (ipddp_create(&rcp));
 
                 case SIOCFINDIPDDPRT:
-                        if(copy_to_user(rt, ipddp_find_route(&rcp), sizeof(struct ipddp_route)))
-                                return -EFAULT;
-                        return 0;
+			spin_lock_bh(&ipddp_route_lock);
+			rp = __ipddp_find_route(&rcp);
+			if (rp)
+				memcpy(&rcp2, rp, sizeof(rcp2));
+			spin_unlock_bh(&ipddp_route_lock);
+
+			if (rp) {
+				if (copy_to_user(rt, &rcp2,
+						 sizeof(struct ipddp_route)))
+					return -EFAULT;
+				return 0;
+			} else
+				return -ENOENT;
 
                 case SIOCDELIPDDPRT:
                         return (ipddp_delete(&rcp));
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 78cc7146913..b642647170b 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
 		if (ints[0] > 2) {
 			dma = ints[3];
 		}
-		/* ignore any other paramters */
+		/* ignore any other parameters */
 	}
 	return 1;
 }
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 7f4bc8ae546..2e7419a6119 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -829,7 +829,7 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->trans_start = jiffies;
 	} else {
 		printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
-		return 1;	/* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
+		return NETDEV_TX_BUSY;	/* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
 				on this skb, he also reports -ENETDOWN and printk's, so either
 				we free and return(0) or don't free and return 1 */
 	}
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index b72b3d639f6..fbf4645417d 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -253,7 +253,7 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
 		skb = dev_alloc_skb(length + 2);
 		if (likely(skb != NULL)) {
 			skb_reserve(skb, 2);
-			dma_sync_single(NULL, ep->descs->rdesc[entry].buf_addr,
+			dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr,
 						length, DMA_FROM_DEVICE);
 			skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
 			skb_put(skb, length);
@@ -331,7 +331,7 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
 	ep->descs->tdesc[entry].tdesc1 =
 		TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
 	skb_copy_and_csum_dev(skb, ep->tx_buf[entry]);
-	dma_sync_single(NULL, ep->descs->tdesc[entry].buf_addr,
+	dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr,
 				skb->len, DMA_TO_DEVICE);
 	dev_kfree_skb(skb);
 
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index ec8a1ae1e88..455037134aa 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -526,7 +526,7 @@ ether3_sendpacket(struct sk_buff *skb, struct net_device *dev)
 
 	if (priv(dev)->tx_tail == next_ptr) {
 		local_irq_restore(flags);
-		return 1;	/* unable to queue */
+		return NETDEV_TX_BUSY;	/* unable to queue */
 	}
 
 	dev->trans_start = jiffies;
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053d3af..6f42ad72891 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 #endif
 			napi_complete(napi);
 			qmgr_enable_irq(rxq);
-			if (!qmgr_stat_empty(rxq) &&
-			    napi_reschedule(napi)) {
+			if (!qmgr_stat_below_low_watermark(rxq) &&
+			    napi_reschedule(napi)) { /* not empty again */
 #if DEBUG_RX
 				printk(KERN_DEBUG "%s: eth_poll"
 				       " napi_reschedule successed\n",
@@ -561,8 +562,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 		dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
 				 RX_BUFF_SIZE, DMA_FROM_DEVICE);
 #else
-		dma_sync_single(&dev->dev, desc->data - NET_IP_ALIGN,
-				RX_BUFF_SIZE, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
+					RX_BUFF_SIZE, DMA_FROM_DEVICE);
 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
 			      ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
 #endif
@@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused)
 			port->tx_buff_tab[n_desc] = NULL;
 		}
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq, phys, desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
 			       port->netdev->name);
@@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		/* really empty in fact */
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_xmit ready again\n",
 			       dev->name);
@@ -814,29 +816,29 @@ static int request_queues(struct port *port)
 	int err;
 
 	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
-			    "%s:RX-free", port->netdev->name);
+				 "%s:RX-free", port->netdev->name);
 	if (err)
 		return err;
 
 	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
-			    "%s:RX", port->netdev->name);
+				 "%s:RX", port->netdev->name);
 	if (err)
 		goto rel_rxfree;
 
 	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
-			    "%s:TX", port->netdev->name);
+				 "%s:TX", port->netdev->name);
 	if (err)
 		goto rel_rx;
 
 	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
-			    "%s:TX-ready", port->netdev->name);
+				 "%s:TX-ready", port->netdev->name);
 	if (err)
 		goto rel_tx;
 
 	/* TX-done queue handles skbs sent out by the NPEs */
 	if (!ports_open) {
 		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
-				    "%s:TX-done", DRV_NAME);
+					 "%s:TX-done", DRV_NAME);
 		if (err)
 			goto rel_txready;
 	}
@@ -1149,7 +1151,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	struct net_device *dev;
 	struct eth_plat_info *plat = pdev->dev.platform_data;
 	u32 regs_phys;
-	char phy_id[BUS_ID_SIZE];
+	char phy_id[MII_BUS_ID_SIZE + 3];
 	int err;
 
 	if (!(dev = alloc_etherdev(sizeof(struct port))))
@@ -1207,7 +1209,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
 	udelay(50);
 
-	snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
 				   PHY_INTERFACE_MODE_MII);
 	if ((err = IS_ERR(port->phydev)))
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index 45c5b7332cd..e4afbd628c2 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -271,7 +271,7 @@ static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+			    WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
 		return -EOPNOTSUPP;
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 83a12125b94..cd547a205fb 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -164,6 +164,24 @@ static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
 }
 
 /*
+ * atl1c_wait_until_idle - wait up to AT_HW_MAX_IDLE_DELAY reads
+ * of the idle status register until the device is actually idle
+ */
+static u32 atl1c_wait_until_idle(struct atl1c_hw *hw)
+{
+	int timeout;
+	u32 data;
+
+	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+		AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+		if ((data & IDLE_STATUS_MASK) == 0)
+			return 0;
+		msleep(1);
+	}
+	return data;
+}
+
+/*
  * atl1c_phy_config - Timer Call-back
  * @data: pointer to netdev cast into an unsigned long
  */
@@ -220,11 +238,11 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
 		/* link down */
 		if (netif_carrier_ok(netdev)) {
 			hw->hibernate = true;
-			atl1c_set_aspm(hw, false);
 			if (atl1c_stop_mac(hw) != 0)
 				if (netif_msg_hw(adapter))
 					dev_warn(&pdev->dev,
 						"stop mac failed\n");
+			atl1c_set_aspm(hw, false);
 		}
 		netif_carrier_off(netdev);
 	} else {
@@ -240,10 +258,10 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
 		    adapter->link_duplex != duplex) {
 			adapter->link_speed  = speed;
 			adapter->link_duplex = duplex;
+			atl1c_set_aspm(hw, true);
 			atl1c_enable_tx_ctrl(hw);
 			atl1c_enable_rx_ctrl(hw);
 			atl1c_setup_mac_ctrl(adapter);
-			atl1c_set_aspm(hw, true);
 			if (netif_msg_link(adapter))
 				dev_info(&pdev->dev,
 					"%s: %s NIC Link is Up<%d Mbps %s>\n",
@@ -1106,7 +1124,6 @@ static void atl1c_configure_dma(struct atl1c_adapter *adapter)
 static int atl1c_stop_mac(struct atl1c_hw *hw)
 {
 	u32 data;
-	int timeout;
 
 	AT_READ_REG(hw, REG_RXQ_CTRL, &data);
 	data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN |
@@ -1117,25 +1134,13 @@ static int atl1c_stop_mac(struct atl1c_hw *hw)
 	data &= ~TXQ_CTRL_EN;
 	AT_WRITE_REG(hw, REG_TWSI_CTRL, data);
 
-	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-		AT_READ_REG(hw, REG_IDLE_STATUS, &data);
-		if ((data & (IDLE_STATUS_RXQ_NO_IDLE |
-			IDLE_STATUS_TXQ_NO_IDLE)) == 0)
-			break;
-		msleep(1);
-	}
+	atl1c_wait_until_idle(hw);
 
 	AT_READ_REG(hw, REG_MAC_CTRL, &data);
 	data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN);
 	AT_WRITE_REG(hw, REG_MAC_CTRL, data);
 
-	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-		AT_READ_REG(hw, REG_IDLE_STATUS, &data);
-		if ((data & IDLE_STATUS_MASK) == 0)
-			return 0;
-		msleep(1);
-	}
-	return data;
+	return (int)atl1c_wait_until_idle(hw);
 }
 
 static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw)
@@ -1178,8 +1183,6 @@ static int atl1c_reset_mac(struct atl1c_hw *hw)
 {
 	struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
 	struct pci_dev *pdev = adapter->pdev;
-	u32 idle_status_data = 0;
-	int timeout = 0;
 	int ret;
 
 	AT_WRITE_REG(hw, REG_IMR, 0);
@@ -1198,15 +1201,10 @@ static int atl1c_reset_mac(struct atl1c_hw *hw)
 	AT_WRITE_FLUSH(hw);
 	msleep(10);
 	/* Wait at least 10ms for All module to be Idle */
-	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-		AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data);
-		if ((idle_status_data & IDLE_STATUS_MASK) == 0)
-			break;
-		msleep(1);
-	}
-	if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+
+	if (atl1c_wait_until_idle(hw)) {
 		dev_err(&pdev->dev,
-			"MAC state machine cann't be idle since"
+			"MAC state machine can't be idle since"
 			" disabled for 10ms second\n");
 		return -1;
 	}
@@ -1242,9 +1240,7 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
 
 	AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
 
-	pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1;
-	pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
-	pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN;
+	pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1;
 	pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
 			PM_CTRL_L1_ENTRY_TIMER_SHIFT);
 
@@ -1254,19 +1250,11 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
 		pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
 		pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
 
-		if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) {
-			pm_ctrl_data |= AT_ASPM_L1_TIMER <<
-				PM_CTRL_L1_ENTRY_TIMER_SHIFT;
-			pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
-		} else
-			pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
-
-		if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT)
-			pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN;
-		else
-			pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
-
+		pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
+		pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
 	} else {
+		pm_ctrl_data &= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
+		pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN;
 		pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
 		pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN;
 
@@ -2123,7 +2111,6 @@ static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	atl1c_tx_map(adapter, skb, tpd, type);
 	atl1c_tx_queue(adapter, skb, tpd, type);
 
-	netdev->trans_start = jiffies;
 	spin_unlock_irqrestore(&adapter->tx_lock, flags);
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h
index 2bf63b4368e..ba48220df16 100644
--- a/drivers/net/atl1e/atl1e.h
+++ b/drivers/net/atl1e/atl1e.h
@@ -429,7 +429,6 @@ struct atl1e_adapter {
 	struct mii_if_info  mii;    /* MII interface info */
 	struct atl1e_hw        hw;
 	struct atl1e_hw_stats  hw_stats;
-	struct net_device_stats net_stats;
 
 	bool have_msi;
 	u32 wol;
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 1342418fb20..9fc6d6d9060 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -1154,7 +1154,7 @@ static struct net_device_stats *atl1e_get_stats(struct net_device *netdev)
 {
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 	struct atl1e_hw_stats  *hw_stats = &adapter->hw_stats;
-	struct net_device_stats *net_stats = &adapter->net_stats;
+	struct net_device_stats *net_stats = &netdev->stats;
 
 	net_stats->rx_packets = hw_stats->rx_ok;
 	net_stats->tx_packets = hw_stats->tx_ok;
@@ -1182,7 +1182,7 @@ static struct net_device_stats *atl1e_get_stats(struct net_device *netdev)
 	net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
 	net_stats->tx_window_errors  = hw_stats->tx_late_col;
 
-	return &adapter->net_stats;
+	return net_stats;
 }
 
 static void atl1e_update_hw_stats(struct atl1e_adapter *adapter)
@@ -1310,7 +1310,7 @@ static irqreturn_t atl1e_intr(int irq, void *data)
 
 		/* link event */
 		if (status & (ISR_GPHY | ISR_MANUAL)) {
-			adapter->net_stats.tx_carrier_errors++;
+			netdev->stats.tx_carrier_errors++;
 			atl1e_link_chg_event(adapter);
 			break;
 		}
@@ -1602,7 +1602,7 @@ static u16 atl1e_cal_tdp_req(const struct sk_buff *skb)
 	}
 
 	if (skb_is_gso(skb)) {
-		if (skb->protocol == ntohs(ETH_P_IP) ||
+		if (skb->protocol == htons(ETH_P_IP) ||
 		   (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6)) {
 			proto_hdr_len = skb_transport_offset(skb) +
 					tcp_hdrlen(skb);
@@ -1795,8 +1795,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
 			memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc));
 
 			tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
-			if (tx_buffer->skb)
-				BUG();
+			BUG_ON(tx_buffer->skb);
 
 			tx_buffer->skb = NULL;
 			tx_buffer->length =
@@ -1879,7 +1878,7 @@ static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 				TPD_VLAN_SHIFT;
 	}
 
-	if (skb->protocol == ntohs(ETH_P_8021Q))
+	if (skb->protocol == htons(ETH_P_8021Q))
 		tpd->word3 |= 1 << TPD_VL_TAGGED_SHIFT;
 
 	if (skb_network_offset(skb) != ETH_HLEN)
@@ -1895,7 +1894,7 @@ static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	atl1e_tx_map(adapter, skb, tpd);
 	atl1e_tx_queue(adapter, tpd_req, tpd);
 
-	netdev->trans_start = jiffies;
+	netdev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
 	spin_unlock_irqrestore(&adapter->tx_lock, flags);
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 4e817126e28..94d7325caf4 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2213,8 +2213,7 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	next_to_use = atomic_read(&tpd_ring->next_to_use);
 	buffer_info = &tpd_ring->buffer_info[next_to_use];
-	if (unlikely(buffer_info->skb))
-		BUG();
+	BUG_ON(buffer_info->skb);
 	/* put skb in last TPD */
 	buffer_info->skb = NULL;
 
@@ -2280,8 +2279,8 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
 			ATL1_MAX_TX_BUF_LEN;
 		for (i = 0; i < nseg; i++) {
 			buffer_info = &tpd_ring->buffer_info[next_to_use];
-			if (unlikely(buffer_info->skb))
-				BUG();
+			BUG_ON(buffer_info->skb);
+
 			buffer_info->skb = NULL;
 			buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
 				ATL1_MAX_TX_BUF_LEN : buf_len;
@@ -2383,7 +2382,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	mss = skb_shinfo(skb)->gso_size;
 	if (mss) {
-		if (skb->protocol == ntohs(ETH_P_IP)) {
+		if (skb->protocol == htons(ETH_P_IP)) {
 			proto_hdr_len = (skb_transport_offset(skb) +
 					 tcp_hdrlen(skb));
 			if (unlikely(proto_hdr_len > len)) {
@@ -2438,7 +2437,6 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	atl1_tx_queue(adapter, count, ptpd);
 	atl1_update_mailbox(adapter);
 	mmiowb();
-	netdev->trans_start = jiffies;
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index d58c105fc77..d3c734f4d67 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -957,7 +957,7 @@ static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
 		/* We've wrapped around and the transmitter is still busy */
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	else if (buff_stat & TX_T_DONE) {
 		update_tx_stats(dev, ptxd->status);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index b70b81ec34c..36d4d377ec2 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -782,7 +782,7 @@ static int b44_rx(struct b44 *bp, int budget)
 		drop_it:
 			b44_recycle_rx(bp, cons, bp->rx_prod);
 		drop_it_no_recycle:
-			bp->stats.rx_dropped++;
+			bp->dev->stats.rx_dropped++;
 			goto next_pkt;
 		}
 
@@ -1647,7 +1647,7 @@ static int b44_close(struct net_device *dev)
 static struct net_device_stats *b44_get_stats(struct net_device *dev)
 {
 	struct b44 *bp = netdev_priv(dev);
-	struct net_device_stats *nstat = &bp->stats;
+	struct net_device_stats *nstat = &dev->stats;
 	struct b44_hw_stats *hwstat = &bp->hw_stats;
 
 	/* Convert HW stats into netdevice stats. */
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index e678498de6d..e1905a49279 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -97,7 +97,7 @@
 #define B44_DMARX_STAT	0x021CUL /* DMA RX Current Active Desc. + Status */
 #define  DMARX_STAT_CDMASK	0x00000fff /* Current Descriptor Mask */
 #define  DMARX_STAT_SMASK	0x0000f000 /* State Mask */
-#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disbaled */
+#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disabled */
 #define  DMARX_STAT_SACTIVE	0x00001000 /* State Active */
 #define  DMARX_STAT_SIDLE	0x00002000 /* State Idle Wait */
 #define  DMARX_STAT_SSTOPPED	0x00003000 /* State Stopped */
@@ -384,7 +384,6 @@ struct b44 {
 
 	struct timer_list	timer;
 
-	struct net_device_stats	stats;
 	struct b44_hw_stats	hw_stats;
 
 	struct ssb_device	*sdev;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 5c378b5e8e4..66bb56874d9 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -168,6 +168,7 @@ static void netdev_stats_update(struct be_adapter *adapter)
 	struct be_port_rxf_stats *port_stats =
 			&rxf_stats->port[adapter->port_num];
 	struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+	struct be_erx_stats *erx_stats = &hw_stats->erx;
 
 	dev_stats->rx_packets = port_stats->rx_total_frames;
 	dev_stats->tx_packets = port_stats->tx_unicastframes +
@@ -181,29 +182,33 @@ static void netdev_stats_update(struct be_adapter *adapter)
 	dev_stats->rx_errors = port_stats->rx_crc_errors +
 		port_stats->rx_alignment_symbol_errors +
 		port_stats->rx_in_range_errors +
-		port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
-
-	/*  packet transmit problems */
-	dev_stats->tx_errors = 0;
-
-	/*  no space in linux buffers */
-	dev_stats->rx_dropped = 0;
-
-	/* no space available in linux */
-	dev_stats->tx_dropped = 0;
-
-	dev_stats->multicast = port_stats->tx_multicastframes;
-	dev_stats->collisions = 0;
+		port_stats->rx_out_range_errors +
+		port_stats->rx_frame_too_long +
+		port_stats->rx_dropped_too_small +
+		port_stats->rx_dropped_too_short +
+		port_stats->rx_dropped_header_too_small +
+		port_stats->rx_dropped_tcp_length +
+		port_stats->rx_dropped_runt +
+		port_stats->rx_tcp_checksum_errs +
+		port_stats->rx_ip_checksum_errs +
+		port_stats->rx_udp_checksum_errs;
+
+	/*  no space in linux buffers: best possible approximation */
+	dev_stats->rx_dropped = erx_stats->rx_drops_no_fragments[0];
 
 	/* detailed rx errors */
 	dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
-		port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+		port_stats->rx_out_range_errors +
+		port_stats->rx_frame_too_long;
+
 	/* receive ring buffer overflow */
 	dev_stats->rx_over_errors = 0;
+
 	dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
 
 	/* frame alignment errors */
 	dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+
 	/* receiver fifo overrun */
 	/* drops_no_pbuf is no per i/f, it's per BE card */
 	dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
@@ -211,6 +216,16 @@ static void netdev_stats_update(struct be_adapter *adapter)
 					rxf_stats->rx_drops_no_pbuf;
 	/* receiver missed packetd */
 	dev_stats->rx_missed_errors = 0;
+
+	/*  packet transmit problems */
+	dev_stats->tx_errors = 0;
+
+	/* no space available in linux */
+	dev_stats->tx_dropped = 0;
+
+	dev_stats->multicast = port_stats->tx_multicastframes;
+	dev_stats->collisions = 0;
+
 	/* detailed tx_errors */
 	dev_stats->tx_aborted_errors = 0;
 	dev_stats->tx_carrier_errors = 0;
@@ -337,13 +352,10 @@ static void be_tx_stats_update(struct be_adapter *adapter,
 /* Determine number of WRB entries needed to xmit data in an skb */
 static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
 {
-	int cnt = 0;
-	while (skb) {
-		if (skb->len > skb->data_len)
-			cnt++;
-		cnt += skb_shinfo(skb)->nr_frags;
-		skb = skb_shinfo(skb)->frag_list;
-	}
+	int cnt = (skb->len > skb->data_len);
+
+	cnt += skb_shinfo(skb)->nr_frags;
+
 	/* to account for hdr wrb */
 	cnt++;
 	if (cnt & 1) {
@@ -409,31 +421,28 @@ static int make_tx_wrbs(struct be_adapter *adapter,
 	hdr = queue_head_node(txq);
 	queue_head_inc(txq);
 
-	while (skb) {
-		if (skb->len > skb->data_len) {
-			int len = skb->len - skb->data_len;
-			busaddr = pci_map_single(pdev, skb->data, len,
-					PCI_DMA_TODEVICE);
-			wrb = queue_head_node(txq);
-			wrb_fill(wrb, busaddr, len);
-			be_dws_cpu_to_le(wrb, sizeof(*wrb));
-			queue_head_inc(txq);
-			copied += len;
-		}
+	if (skb->len > skb->data_len) {
+		int len = skb->len - skb->data_len;
+		busaddr = pci_map_single(pdev, skb->data, len,
+					 PCI_DMA_TODEVICE);
+		wrb = queue_head_node(txq);
+		wrb_fill(wrb, busaddr, len);
+		be_dws_cpu_to_le(wrb, sizeof(*wrb));
+		queue_head_inc(txq);
+		copied += len;
+	}
 
-		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-			struct skb_frag_struct *frag =
-				&skb_shinfo(skb)->frags[i];
-			busaddr = pci_map_page(pdev, frag->page,
-					frag->page_offset,
-					frag->size, PCI_DMA_TODEVICE);
-			wrb = queue_head_node(txq);
-			wrb_fill(wrb, busaddr, frag->size);
-			be_dws_cpu_to_le(wrb, sizeof(*wrb));
-			queue_head_inc(txq);
-			copied += frag->size;
-		}
-		skb = skb_shinfo(skb)->frag_list;
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		struct skb_frag_struct *frag =
+			&skb_shinfo(skb)->frags[i];
+		busaddr = pci_map_page(pdev, frag->page,
+				       frag->page_offset,
+				       frag->size, PCI_DMA_TODEVICE);
+		wrb = queue_head_node(txq);
+		wrb_fill(wrb, busaddr, frag->size);
+		be_dws_cpu_to_le(wrb, sizeof(*wrb));
+		queue_head_inc(txq);
+		copied += frag->size;
 	}
 
 	if (dummy_wrb) {
@@ -478,8 +487,6 @@ static int be_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	be_txq_notify(&adapter->ctrl, txq->id, wrb_cnt);
 
-	netdev->trans_start = jiffies;
-
 	be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
 	return NETDEV_TX_OK;
 }
@@ -637,6 +644,22 @@ static void be_rx_stats_update(struct be_adapter *adapter,
 	stats->be_rx_bytes += pktsize;
 }
 
+static inline bool do_pkt_csum(struct be_eth_rx_compl *rxcp, bool cso)
+{
+	u8 l4_cksm, ip_version, ipcksm, tcpf = 0, udpf = 0, ipv6_chk;
+
+	l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
+	ipcksm = AMAP_GET_BITS(struct amap_eth_rx_compl, ipcksm, rxcp);
+	ip_version = AMAP_GET_BITS(struct amap_eth_rx_compl, ip_version, rxcp);
+	if (ip_version) {
+		tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
+		udpf = AMAP_GET_BITS(struct amap_eth_rx_compl, udpf, rxcp);
+	}
+	ipv6_chk = (ip_version && (tcpf || udpf));
+
+	return ((l4_cksm && ipv6_chk && ipcksm) && cso) ? false : true;
+}
+
 static struct be_rx_page_info *
 get_rx_page_info(struct be_adapter *adapter, u16 frag_idx)
 {
@@ -720,7 +743,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 
 	if (pktsize <= rx_frag_size) {
 		BUG_ON(num_rcvd != 1);
-		return;
+		goto done;
 	}
 
 	/* More frags present for this completion */
@@ -742,6 +765,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 		memset(page_info, 0, sizeof(*page_info));
 	}
 
+done:
 	be_rx_stats_update(adapter, pktsize, num_rcvd);
 	return;
 }
@@ -752,9 +776,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 {
 	struct sk_buff *skb;
 	u32 vtp, vid;
-	int l4_cksm;
 
-	l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
 	vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
 
 	skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
@@ -769,10 +791,10 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 
 	skb_fill_rx_data(adapter, skb, rxcp);
 
-	if (l4_cksm && adapter->rx_csum)
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	else
+	if (do_pkt_csum(rxcp, adapter->rx_csum))
 		skb->ip_summed = CHECKSUM_NONE;
+	else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	skb->truesize = skb->len + sizeof(struct sk_buff);
 	skb->protocol = eth_type_trans(skb, adapter->netdev);
@@ -854,12 +876,19 @@ static struct be_eth_rx_compl *be_rx_compl_get(struct be_adapter *adapter)
 
 	be_dws_le_to_cpu(rxcp, sizeof(*rxcp));
 
-	rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
-
 	queue_tail_inc(&adapter->rx_obj.cq);
 	return rxcp;
 }
 
+/* To reset the valid bit, we need to reset the whole word as
+ * when walking the queue the valid entries are little-endian
+ * and invalid entries are host endian
+ */
+static inline void be_rx_compl_reset(struct be_eth_rx_compl *rxcp)
+{
+	rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
+}
+
 static inline struct page *be_alloc_pages(u32 size)
 {
 	gfp_t alloc_flags = GFP_ATOMIC;
@@ -991,6 +1020,7 @@ static void be_rx_q_clean(struct be_adapter *adapter)
 	/* First cleanup pending rx completions */
 	while ((rxcp = be_rx_compl_get(adapter)) != NULL) {
 		be_rx_compl_discard(adapter, rxcp);
+		be_rx_compl_reset(rxcp);
 		be_cq_notify(&adapter->ctrl, rx_cq->id, true, 1);
 	}
 
@@ -1026,8 +1056,13 @@ static void be_tx_queues_destroy(struct be_adapter *adapter)
 	struct be_queue_info *q;
 
 	q = &adapter->tx_obj.q;
-	if (q->created)
+	if (q->created) {
 		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_TXQ);
+
+		/* No more tx completions can be rcvd now; clean up if there
+		 * are any pending completions or pending tx requests */
+		be_tx_q_clean(adapter);
+	}
 	be_queue_free(adapter, q);
 
 	q = &adapter->tx_obj.cq;
@@ -1035,10 +1070,6 @@ static void be_tx_queues_destroy(struct be_adapter *adapter)
 		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
 	be_queue_free(adapter, q);
 
-	/* No more tx completions can be rcvd now; clean up if there are
-	 * any pending completions or pending tx requests */
-	be_tx_q_clean(adapter);
-
 	q = &adapter->tx_eq.q;
 	if (q->created)
 		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
@@ -1272,6 +1303,8 @@ int be_poll_rx(struct napi_struct *napi, int budget)
 			be_rx_compl_process_lro(adapter, rxcp);
 		else
 			be_rx_compl_process(adapter, rxcp);
+
+		be_rx_compl_reset(rxcp);
 	}
 
 	lro_flush_all(&adapter->rx_obj.lro_mgr);
@@ -1527,7 +1560,7 @@ static int be_close(struct net_device *netdev)
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
 	int vec;
 
-	cancel_delayed_work(&adapter->work);
+	cancel_delayed_work_sync(&adapter->work);
 
 	netif_stop_queue(netdev);
 	netif_carrier_off(netdev);
@@ -1626,10 +1659,12 @@ static void be_netdev_init(struct net_device *netdev)
 
 	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
 		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
-		NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+		NETIF_F_IPV6_CSUM;
 
 	netdev->flags |= IFF_MULTICAST;
 
+	adapter->rx_csum = true;
+
 	BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
 
 	SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index b4da1821332..c15fc281f79 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -194,13 +194,13 @@ static int desc_list_init(void)
 		struct dma_descriptor *b = &(r->desc_b);
 
 		/* allocate a new skb for next time receive */
-		new_skb = dev_alloc_skb(PKT_BUF_SZ + 2);
+		new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 		if (!new_skb) {
 			printk(KERN_NOTICE DRV_NAME
 			       ": init: low on mem - packet dropped\n");
 			goto init_error;
 		}
-		skb_reserve(new_skb, 2);
+		skb_reserve(new_skb, NET_IP_ALIGN);
 		r->skb = new_skb;
 
 		/*
@@ -566,9 +566,9 @@ static void adjust_tx_list(void)
 	 */
 	if (current_tx_ptr->next->next == tx_list_head) {
 		while (tx_list_head->status.status_word == 0) {
-			mdelay(1);
+			udelay(10);
 			if (tx_list_head->status.status_word != 0
-			    || !(bfin_read_DMA2_IRQ_STATUS() & 0x08)) {
+			    || !(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) {
 				goto adjust_head;
 			}
 			if (timeout_cnt-- < 0) {
@@ -606,93 +606,41 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
 	u16 *data;
-
+	u32 data_align = (unsigned long)(skb->data) & 0x3;
 	current_tx_ptr->skb = skb;
 
-	if (ANOMALY_05000285) {
-		/*
-		 * TXDWA feature is not avaible to older revision < 0.3 silicon
-		 * of BF537
-		 *
-		 * Only if data buffer is ODD WORD alignment, we do not
-		 * need to memcpy
-		 */
-		u32 data_align = (u32)(skb->data) & 0x3;
-		if (data_align == 0x2) {
-			/* move skb->data to current_tx_ptr payload */
-			data = (u16 *)(skb->data) - 1;
-			*data = (u16)(skb->len);
-			current_tx_ptr->desc_a.start_addr = (u32)data;
-			/* this is important! */
-			blackfin_dcache_flush_range((u32)data,
-					(u32)((u8 *)data + skb->len + 4));
-		} else {
-			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
-			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
-				skb->len);
-			current_tx_ptr->desc_a.start_addr =
-				(u32)current_tx_ptr->packet;
-			if (current_tx_ptr->status.status_word != 0)
-				current_tx_ptr->status.status_word = 0;
-			blackfin_dcache_flush_range(
-				(u32)current_tx_ptr->packet,
-				(u32)(current_tx_ptr->packet + skb->len + 2));
-		}
+	if (data_align == 0x2) {
+		/* move skb->data to current_tx_ptr payload */
+		data = (u16 *)(skb->data) - 1;
+				*data = (u16)(skb->len);
+		current_tx_ptr->desc_a.start_addr = (u32)data;
+		/* this is important! */
+		blackfin_dcache_flush_range((u32)data,
+				(u32)((u8 *)data + skb->len + 4));
 	} else {
-		/*
-		 * TXDWA feature is avaible to revision < 0.3 silicon of
-		 * BF537 and always avaible to BF52x
-		 */
-		u32 data_align = (u32)(skb->data) & 0x3;
-		if (data_align == 0x0) {
-			u16 sysctl = bfin_read_EMAC_SYSCTL();
-			sysctl |= TXDWA;
-			bfin_write_EMAC_SYSCTL(sysctl);
-
-			/* move skb->data to current_tx_ptr payload */
-			data = (u16 *)(skb->data) - 2;
-			*data = (u16)(skb->len);
-			current_tx_ptr->desc_a.start_addr = (u32)data;
-			/* this is important! */
-			blackfin_dcache_flush_range(
-					(u32)data,
-					(u32)((u8 *)data + skb->len + 4));
-		} else if (data_align == 0x2) {
-			u16 sysctl = bfin_read_EMAC_SYSCTL();
-			sysctl &= ~TXDWA;
-			bfin_write_EMAC_SYSCTL(sysctl);
-
-			/* move skb->data to current_tx_ptr payload */
-			data = (u16 *)(skb->data) - 1;
-			*data = (u16)(skb->len);
-			current_tx_ptr->desc_a.start_addr = (u32)data;
-			/* this is important! */
-			blackfin_dcache_flush_range(
-					(u32)data,
-					(u32)((u8 *)data + skb->len + 4));
-		} else {
-			u16 sysctl = bfin_read_EMAC_SYSCTL();
-			sysctl &= ~TXDWA;
-			bfin_write_EMAC_SYSCTL(sysctl);
-
-			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
-			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
-				skb->len);
-			current_tx_ptr->desc_a.start_addr =
-				(u32)current_tx_ptr->packet;
-			if (current_tx_ptr->status.status_word != 0)
-				current_tx_ptr->status.status_word = 0;
-			blackfin_dcache_flush_range(
-				(u32)current_tx_ptr->packet,
-				(u32)(current_tx_ptr->packet + skb->len + 2));
-		}
+		*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+		memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+			skb->len);
+		current_tx_ptr->desc_a.start_addr =
+			(u32)current_tx_ptr->packet;
+		if (current_tx_ptr->status.status_word != 0)
+			current_tx_ptr->status.status_word = 0;
+		blackfin_dcache_flush_range(
+			(u32)current_tx_ptr->packet,
+			(u32)(current_tx_ptr->packet + skb->len + 2));
 	}
 
+	/* make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below
+	 */
+	SSYNC();
+
 	/* enable this packet's dma */
 	current_tx_ptr->desc_a.config |= DMAEN;
 
 	/* tx dma is running, just return */
-	if (bfin_read_DMA2_IRQ_STATUS() & 0x08)
+	if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
 		goto out;
 
 	/* tx dma is not running */
@@ -718,7 +666,7 @@ static void bfin_mac_rx(struct net_device *dev)
 
 	/* allocate a new skb for next time receive */
 	skb = current_rx_ptr->skb;
-	new_skb = dev_alloc_skb(PKT_BUF_SZ + 2);
+	new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 	if (!new_skb) {
 		printk(KERN_NOTICE DRV_NAME
 		       ": rx: low on mem - packet dropped\n");
@@ -726,7 +674,7 @@ static void bfin_mac_rx(struct net_device *dev)
 		goto out;
 	}
 	/* reserve 2 bytes for RXDWA padding */
-	skb_reserve(new_skb, 2);
+	skb_reserve(new_skb, NET_IP_ALIGN);
 	current_rx_ptr->skb = new_skb;
 	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
 
@@ -1022,7 +970,8 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
 	struct bfin_mac_local *lp;
-	int rc, i;
+	struct platform_device *pd;
+	int rc;
 
 	ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
 	if (!ndev) {
@@ -1047,13 +996,6 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 		goto out_err_probe_mac;
 	}
 
-	/* set the GPIO pins to Ethernet mode */
-	rc = peripheral_request_list(pin_req, DRV_NAME);
-	if (rc) {
-		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
-		rc = -EFAULT;
-		goto out_err_setup_pin_mux;
-	}
 
 	/*
 	 * Is it valid? (Did bootloader initialize it?)
@@ -1069,26 +1011,14 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 
 	setup_mac_addr(ndev->dev_addr);
 
-	/* MDIO bus initial */
-	lp->mii_bus = mdiobus_alloc();
-	if (lp->mii_bus == NULL)
-		goto out_err_mdiobus_alloc;
-
-	lp->mii_bus->priv = ndev;
-	lp->mii_bus->read = bfin_mdiobus_read;
-	lp->mii_bus->write = bfin_mdiobus_write;
-	lp->mii_bus->reset = bfin_mdiobus_reset;
-	lp->mii_bus->name = "bfin_mac_mdio";
-	snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "0");
-	lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-	for (i = 0; i < PHY_MAX_ADDR; ++i)
-		lp->mii_bus->irq[i] = PHY_POLL;
-
-	rc = mdiobus_register(lp->mii_bus);
-	if (rc) {
-		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
-		goto out_err_mdiobus_register;
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
+		rc = -ENODEV;
+		goto out_err_probe_mac;
 	}
+	pd = pdev->dev.platform_data;
+	lp->mii_bus = platform_get_drvdata(pd);
+	lp->mii_bus->priv = ndev;
 
 	rc = mii_probe(ndev);
 	if (rc) {
@@ -1107,7 +1037,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	/* now, enable interrupts */
 	/* register irq handler */
 	rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
-			IRQF_DISABLED | IRQF_SHARED, "EMAC_RX", ndev);
+			IRQF_DISABLED, "EMAC_RX", ndev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
 		rc = -EBUSY;
@@ -1130,11 +1060,8 @@ out_err_reg_ndev:
 out_err_request_irq:
 out_err_mii_probe:
 	mdiobus_unregister(lp->mii_bus);
-out_err_mdiobus_register:
 	mdiobus_free(lp->mii_bus);
-out_err_mdiobus_alloc:
 	peripheral_free_list(pin_req);
-out_err_setup_pin_mux:
 out_err_probe_mac:
 	platform_set_drvdata(pdev, NULL);
 	free_netdev(ndev);
@@ -1149,8 +1076,7 @@ static int __devexit bfin_mac_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	mdiobus_unregister(lp->mii_bus);
-	mdiobus_free(lp->mii_bus);
+	lp->mii_bus->priv = NULL;
 
 	unregister_netdev(ndev);
 
@@ -1188,6 +1114,74 @@ static int bfin_mac_resume(struct platform_device *pdev)
 #define bfin_mac_resume NULL
 #endif	/* CONFIG_PM */
 
+static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
+{
+	struct mii_bus *miibus;
+	int rc, i;
+
+	/*
+	 * We are setting up a network card,
+	 * so set the GPIO pins to Ethernet mode
+	 */
+	rc = peripheral_request_list(pin_req, DRV_NAME);
+	if (rc) {
+		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
+		return rc;
+	}
+
+	rc = -ENOMEM;
+	miibus = mdiobus_alloc();
+	if (miibus == NULL)
+		goto out_err_alloc;
+	miibus->read = bfin_mdiobus_read;
+	miibus->write = bfin_mdiobus_write;
+	miibus->reset = bfin_mdiobus_reset;
+
+	miibus->parent = &pdev->dev;
+	miibus->name = "bfin_mii_bus";
+	snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
+	miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+	if (miibus->irq == NULL)
+		goto out_err_alloc;
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		miibus->irq[i] = PHY_POLL;
+
+	rc = mdiobus_register(miibus);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+		goto out_err_mdiobus_register;
+	}
+
+	platform_set_drvdata(pdev, miibus);
+	return 0;
+
+out_err_mdiobus_register:
+	mdiobus_free(miibus);
+out_err_alloc:
+	peripheral_free_list(pin_req);
+
+	return rc;
+}
+
+static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
+{
+	struct mii_bus *miibus = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, NULL);
+	mdiobus_unregister(miibus);
+	mdiobus_free(miibus);
+	peripheral_free_list(pin_req);
+	return 0;
+}
+
+static struct platform_driver bfin_mii_bus_driver = {
+	.probe = bfin_mii_bus_probe,
+	.remove = __devexit_p(bfin_mii_bus_remove),
+	.driver = {
+		.name = "bfin_mii_bus",
+		.owner	= THIS_MODULE,
+	},
+};
+
 static struct platform_driver bfin_mac_driver = {
 	.probe = bfin_mac_probe,
 	.remove = __devexit_p(bfin_mac_remove),
@@ -1201,7 +1195,11 @@ static struct platform_driver bfin_mac_driver = {
 
 static int __init bfin_mac_init(void)
 {
-	return platform_driver_register(&bfin_mac_driver);
+	int ret;
+	ret = platform_driver_register(&bfin_mii_bus_driver);
+	if (!ret)
+		return platform_driver_register(&bfin_mac_driver);
+	return -ENODEV;
 }
 
 module_init(bfin_mac_init);
@@ -1209,6 +1207,7 @@ module_init(bfin_mac_init);
 static void __exit bfin_mac_cleanup(void)
 {
 	platform_driver_unregister(&bfin_mac_driver);
+	platform_driver_unregister(&bfin_mii_bus_driver);
 }
 
 module_exit(bfin_mac_cleanup);
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 44d015f70d1..9578a3dfac0 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1247,6 +1247,16 @@ static const struct ethtool_ops bmac_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 };
 
+static const struct net_device_ops bmac_netdev_ops = {
+	.ndo_open		= bmac_open,
+	.ndo_stop		= bmac_close,
+	.ndo_start_xmit		= bmac_output,
+	.ndo_set_multicast_list	= bmac_set_multicast,
+	.ndo_set_mac_address	= bmac_set_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __devinit bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
 {
 	int j, rev, ret;
@@ -1308,12 +1318,8 @@ static int __devinit bmac_probe(struct macio_dev *mdev, const struct of_device_i
 	bmac_enable_and_reset_chip(dev);
 	bmwrite(dev, INTDISABLE, DisableAll);
 
-	dev->open = bmac_open;
-	dev->stop = bmac_close;
+	dev->netdev_ops = &bmac_netdev_ops;
 	dev->ethtool_ops = &bmac_ethtool_ops;
-	dev->hard_start_xmit = bmac_output;
-	dev->set_multicast_list = bmac_set_multicast;
-	dev->set_mac_address = bmac_set_address;
 
 	bmac_get_station_address(dev, addr);
 	if (bmac_verify_checksum(dev) != 0)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b0cb29d4cc0..7e3738112c4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -48,7 +48,12 @@
 #include <linux/cache.h>
 #include <linux/firmware.h>
 #include <linux/log2.h>
+#include <linux/list.h>
 
+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
 #include "bnx2.h"
 #include "bnx2_fw.h"
 
@@ -315,6 +320,158 @@ bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val)
 	spin_unlock_bh(&bp->indirect_lock);
 }
 
+#ifdef BCM_CNIC
+static int
+bnx2_drv_ctl(struct net_device *dev, struct drv_ctl_info *info)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct drv_ctl_io *io = &info->data.io;
+
+	switch (info->cmd) {
+	case DRV_CTL_IO_WR_CMD:
+		bnx2_reg_wr_ind(bp, io->offset, io->data);
+		break;
+	case DRV_CTL_IO_RD_CMD:
+		io->data = bnx2_reg_rd_ind(bp, io->offset);
+		break;
+	case DRV_CTL_CTX_WR_CMD:
+		bnx2_ctx_wr(bp, io->cid_addr, io->offset, io->data);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void bnx2_setup_cnic_irq_info(struct bnx2 *bp)
+{
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	int sb_id;
+
+	if (bp->flags & BNX2_FLAG_USING_MSIX) {
+		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+		bnapi->cnic_present = 0;
+		sb_id = bp->irq_nvecs;
+		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+	} else {
+		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+		bnapi->cnic_tag = bnapi->last_status_idx;
+		bnapi->cnic_present = 1;
+		sb_id = 0;
+		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+	}
+
+	cp->irq_arr[0].vector = bp->irq_tbl[sb_id].vector;
+	cp->irq_arr[0].status_blk = (void *)
+		((unsigned long) bnapi->status_blk.msi +
+		(BNX2_SBLK_MSIX_ALIGN_SIZE * sb_id));
+	cp->irq_arr[0].status_blk_num = sb_id;
+	cp->num_irq = 1;
+}
+
+static int bnx2_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+			      void *data)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (ops == NULL)
+		return -EINVAL;
+
+	if (cp->drv_state & CNIC_DRV_STATE_REGD)
+		return -EBUSY;
+
+	bp->cnic_data = data;
+	rcu_assign_pointer(bp->cnic_ops, ops);
+
+	cp->num_irq = 0;
+	cp->drv_state = CNIC_DRV_STATE_REGD;
+
+	bnx2_setup_cnic_irq_info(bp);
+
+	return 0;
+}
+
+static int bnx2_unregister_cnic(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_state = 0;
+	bnapi->cnic_present = 0;
+	rcu_assign_pointer(bp->cnic_ops, NULL);
+	synchronize_rcu();
+	return 0;
+}
+
+struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_owner = THIS_MODULE;
+	cp->chip_id = bp->chip_id;
+	cp->pdev = bp->pdev;
+	cp->io_base = bp->regview;
+	cp->drv_ctl = bnx2_drv_ctl;
+	cp->drv_register_cnic = bnx2_register_cnic;
+	cp->drv_unregister_cnic = bnx2_unregister_cnic;
+
+	return cp;
+}
+EXPORT_SYMBOL(bnx2_cnic_probe);
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+	struct cnic_ops *c_ops;
+	struct cnic_ctl_info info;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops) {
+		info.cmd = CNIC_CTL_STOP_CMD;
+		c_ops->cnic_ctl(bp->cnic_data, &info);
+	}
+	rcu_read_unlock();
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+	struct cnic_ops *c_ops;
+	struct cnic_ctl_info info;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops) {
+		if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
+			struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+
+			bnapi->cnic_tag = bnapi->last_status_idx;
+		}
+		info.cmd = CNIC_CTL_START_CMD;
+		c_ops->cnic_ctl(bp->cnic_data, &info);
+	}
+	rcu_read_unlock();
+}
+
+#else
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+}
+
+#endif
+
 static int
 bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val)
 {
@@ -488,6 +645,7 @@ bnx2_napi_enable(struct bnx2 *bp)
 static void
 bnx2_netif_stop(struct bnx2 *bp)
 {
+	bnx2_cnic_stop(bp);
 	bnx2_disable_int_sync(bp);
 	if (netif_running(bp->dev)) {
 		bnx2_napi_disable(bp);
@@ -504,6 +662,7 @@ bnx2_netif_start(struct bnx2 *bp)
 			netif_tx_wake_all_queues(bp->dev);
 			bnx2_napi_enable(bp);
 			bnx2_enable_int(bp);
+			bnx2_cnic_start(bp);
 		}
 	}
 }
@@ -545,8 +704,7 @@ bnx2_free_rx_mem(struct bnx2 *bp)
 						    rxr->rx_desc_mapping[j]);
 			rxr->rx_desc_ring[j] = NULL;
 		}
-		if (rxr->rx_buf_ring)
-			vfree(rxr->rx_buf_ring);
+		vfree(rxr->rx_buf_ring);
 		rxr->rx_buf_ring = NULL;
 
 		for (j = 0; j < bp->rx_max_pg_ring; j++) {
@@ -556,8 +714,7 @@ bnx2_free_rx_mem(struct bnx2 *bp)
 						    rxr->rx_pg_desc_mapping[j]);
 			rxr->rx_pg_desc_ring[j] = NULL;
 		}
-		if (rxr->rx_pg_ring)
-			vfree(rxr->rx_pg_ring);
+		vfree(rxr->rx_pg_ring);
 		rxr->rx_pg_ring = NULL;
 	}
 }
@@ -2630,14 +2787,15 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		tx_buf = &txr->tx_buf_ring[sw_ring_cons];
 		skb = tx_buf->skb;
 
+		/* prefetch skb_end_pointer() to speedup skb_shinfo(skb) */
+		prefetch(&skb->end);
+
 		/* partial BD completions possible with TSO packets */
-		if (skb_is_gso(skb)) {
+		if (tx_buf->is_gso) {
 			u16 last_idx, last_ring_idx;
 
-			last_idx = sw_cons +
-				skb_shinfo(skb)->nr_frags + 1;
-			last_ring_idx = sw_ring_cons +
-				skb_shinfo(skb)->nr_frags + 1;
+			last_idx = sw_cons + tx_buf->nr_frags + 1;
+			last_ring_idx = sw_ring_cons + tx_buf->nr_frags + 1;
 			if (unlikely(last_ring_idx >= MAX_TX_DESC_CNT)) {
 				last_idx++;
 			}
@@ -2649,7 +2807,7 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		skb_dma_unmap(&bp->pdev->dev, skb, DMA_TO_DEVICE);
 
 		tx_buf->skb = NULL;
-		last = skb_shinfo(skb)->nr_frags;
+		last = tx_buf->nr_frags;
 
 		for (i = 0; i < last; i++) {
 			sw_cons = NEXT_TX_BD(sw_cons);
@@ -2662,7 +2820,8 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		if (tx_pkt == budget)
 			break;
 
-		hw_cons = bnx2_get_hw_tx_cons(bnapi);
+		if (hw_cons == sw_cons)
+			hw_cons = bnx2_get_hw_tx_cons(bnapi);
 	}
 
 	txr->hw_tx_cons = hw_cons;
@@ -3164,6 +3323,11 @@ bnx2_has_work(struct bnx2_napi *bnapi)
 	if (bnx2_has_fast_work(bnapi))
 		return 1;
 
+#ifdef BCM_CNIC
+	if (bnapi->cnic_present && (bnapi->cnic_tag != sblk->status_idx))
+		return 1;
+#endif
+
 	if ((sblk->status_attn_bits & STATUS_ATTN_EVENTS) !=
 	    (sblk->status_attn_bits_ack & STATUS_ATTN_EVENTS))
 		return 1;
@@ -3193,6 +3357,23 @@ bnx2_chk_missed_msi(struct bnx2 *bp)
 	bp->idle_chk_status_idx = bnapi->last_status_idx;
 }
 
+#ifdef BCM_CNIC
+static void bnx2_poll_cnic(struct bnx2 *bp, struct bnx2_napi *bnapi)
+{
+	struct cnic_ops *c_ops;
+
+	if (!bnapi->cnic_present)
+		return;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops)
+		bnapi->cnic_tag = c_ops->cnic_handler(bp->cnic_data,
+						      bnapi->status_blk.msi);
+	rcu_read_unlock();
+}
+#endif
+
 static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
 {
 	struct status_block *sblk = bnapi->status_blk.msi;
@@ -3267,6 +3448,10 @@ static int bnx2_poll(struct napi_struct *napi, int budget)
 
 		work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
 
+#ifdef BCM_CNIC
+		bnx2_poll_cnic(bp, bnapi);
+#endif
+
 		/* bnapi->last_status_idx is used below to tell the hw how
 		 * much work has been processed, so we must read it before
 		 * checking for more work.
@@ -3308,7 +3493,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 {
 	struct bnx2 *bp = netdev_priv(dev);
 	u32 rx_mode, sort_mode;
-	struct dev_addr_list *uc_ptr;
+	struct netdev_hw_addr *ha;
 	int i;
 
 	if (!netif_running(dev))
@@ -3367,21 +3552,19 @@ bnx2_set_rx_mode(struct net_device *dev)
 		sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
 	}
 
-	uc_ptr = NULL;
 	if (dev->uc_count > BNX2_MAX_UNICAST_ADDRESSES) {
 		rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
 		sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN |
 			     BNX2_RPM_SORT_USER0_PROM_VLAN;
 	} else if (!(dev->flags & IFF_PROMISC)) {
-		uc_ptr = dev->uc_list;
-
 		/* Add all entries into to the match filter list */
-		for (i = 0; i < dev->uc_count; i++) {
-			bnx2_set_mac_addr(bp, uc_ptr->da_addr,
+		i = 0;
+		list_for_each_entry(ha, &dev->uc_list, list) {
+			bnx2_set_mac_addr(bp, ha->addr,
 					  i + BNX2_START_UNICAST_ADDRESS_INDEX);
 			sort_mode |= (1 <<
 				      (i + BNX2_START_UNICAST_ADDRESS_INDEX));
-			uc_ptr = uc_ptr->next;
+			i++;
 		}
 
 	}
@@ -4632,8 +4815,11 @@ bnx2_init_chip(struct bnx2 *bp)
 	val = REG_RD(bp, BNX2_MQ_CONFIG);
 	val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
 	val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
-	if (CHIP_ID(bp) == CHIP_ID_5709_A0 || CHIP_ID(bp) == CHIP_ID_5709_A1)
-		val |= BNX2_MQ_CONFIG_HALT_DIS;
+	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+		val |= BNX2_MQ_CONFIG_BIN_MQ_MODE;
+		if (CHIP_REV(bp) == CHIP_REV_Ax)
+			val |= BNX2_MQ_CONFIG_HALT_DIS;
+	}
 
 	REG_WR(bp, BNX2_MQ_CONFIG, val);
 
@@ -5486,7 +5672,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
 		dev_kfree_skb(skb);
 		return -EIO;
 	}
-	map = skb_shinfo(skb)->dma_maps[0];
+	map = skb_shinfo(skb)->dma_head;
 
 	REG_WR(bp, BNX2_HC_COMMAND,
 	       bp->hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
@@ -6166,7 +6352,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	sp = skb_shinfo(skb);
-	mapping = sp->dma_maps[0];
+	mapping = sp->dma_head;
 
 	tx_buf = &txr->tx_buf_ring[ring_prod];
 	tx_buf->skb = skb;
@@ -6179,6 +6365,8 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	txbd->tx_bd_vlan_tag_flags = vlan_tag_flags | TX_BD_FLAGS_START;
 
 	last_frag = skb_shinfo(skb)->nr_frags;
+	tx_buf->nr_frags = last_frag;
+	tx_buf->is_gso = skb_is_gso(skb);
 
 	for (i = 0; i < last_frag; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -6188,7 +6376,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		txbd = &txr->tx_desc_ring[ring_prod];
 
 		len = frag->size;
-		mapping = sp->dma_maps[i + 1];
+		mapping = sp->dma_maps[i];
 
 		txbd->tx_bd_haddr_hi = (u64) mapping >> 32;
 		txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff;
@@ -6207,7 +6395,6 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	mmiowb();
 
 	txr->tx_prod = prod;
-	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2_tx_avail(bp, txr) <= MAX_SKB_FRAGS)) {
 		netif_tx_stop_queue(txq);
@@ -7471,7 +7658,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	INIT_WORK(&bp->reset_task, bnx2_reset_task);
 
 	dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
-	mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS);
+	mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS + 1);
 	dev->mem_end = dev->mem_start + mem_len;
 	dev->irq = pdev->irq;
 
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 5b570e17c83..f1edfaa9e56 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,6 +361,9 @@ struct l2_fhdr {
 #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE	 (1<<28)
 
 #define BNX2_L2CTX_HOST_BDIDX				0x00000004
+#define BNX2_L2CTX_STATUSB_NUM_SHIFT			 16
+#define BNX2_L2CTX_STATUSB_NUM(sb_id)			 \
+	(((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
 #define BNX2_L2CTX_HOST_BSEQ				0x00000008
 #define BNX2_L2CTX_NX_BSEQ				0x0000000c
 #define BNX2_L2CTX_NX_BDHADDR_HI			0x00000010
@@ -5900,6 +5903,7 @@ struct l2_fhdr {
 #define BNX2_RXP_FTQ_CTL_CUR_DEPTH			 (0x3ffL<<22)
 
 #define BNX2_RXP_SCRATCH				0x000e0000
+#define BNX2_RXP_SCRATCH_RXP_FLOOD			 0x000e0024
 #define BNX2_RXP_SCRATCH_RSS_TBL_SZ			 0x000e0038
 #define BNX2_RXP_SCRATCH_RSS_TBL			 0x000e003c
 #define BNX2_RXP_SCRATCH_RSS_TBL_MAX_ENTRIES		 128
@@ -6552,6 +6556,8 @@ struct sw_pg {
 
 struct sw_tx_bd {
 	struct sk_buff		*skb;
+	unsigned short		is_gso;
+	unsigned short		nr_frags;
 };
 
 #define SW_RXBD_RING_SIZE (sizeof(struct sw_bd) * RX_DESC_CNT)
@@ -6678,6 +6684,11 @@ struct bnx2_napi {
 	u32 			last_status_idx;
 	u32			int_num;
 
+#ifdef BCM_CNIC
+	u32			cnic_tag;
+	int			cnic_present;
+#endif
+
 	struct bnx2_rx_ring_info	rx_ring;
 	struct bnx2_tx_ring_info	tx_ring;
 };
@@ -6727,6 +6738,11 @@ struct bnx2 {
 	int		tx_ring_size;
 	u32		tx_wake_thresh;
 
+#ifdef BCM_CNIC
+	struct cnic_ops		*cnic_ops;
+	void			*cnic_data;
+#endif
+
 	/* End of fields used in the performance code paths. */
 
 	unsigned int		current_interval;
@@ -6885,6 +6901,10 @@ struct bnx2 {
 
 	u32			idle_chk_status_idx;
 
+#ifdef BCM_CNIC
+	struct cnic_eth_dev	cnic_eth_dev;
+#endif
+
 	const struct firmware	*mips_firmware;
 	const struct firmware	*rv2p_firmware;
 };
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a329bee2555..8678457849f 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -965,6 +965,21 @@ struct bnx2x {
 	int			gunzip_outlen;
 #define FW_BUF_SIZE			0x8000
 
+	struct raw_op          *init_ops;
+	/* Init blocks offsets inside init_ops */
+	u16                    *init_ops_offsets;
+	/* Data blob - has 32 bit granularity */
+	u32                    *init_data;
+	/* Zipped PRAM blobs - raw data */
+	const u8               *tsem_int_table_data;
+	const u8               *tsem_pram_data;
+	const u8               *usem_int_table_data;
+	const u8               *usem_pram_data;
+	const u8               *xsem_int_table_data;
+	const u8               *xsem_pram_data;
+	const u8               *csem_int_table_data;
+	const u8               *csem_pram_data;
+        const struct firmware  *firmware;
 };
 
 
diff --git a/drivers/net/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x_fw_file_hdr.h
new file mode 100644
index 00000000000..3f5ee5d7cc2
--- /dev/null
+++ b/drivers/net/bnx2x_fw_file_hdr.h
@@ -0,0 +1,37 @@
+/* bnx2x_fw_file_hdr.h: FW binary file header structure.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ * Based on the original idea of John Wright <john.wright@hp.com>.
+ */
+
+#ifndef BNX2X_INIT_FILE_HDR_H
+#define BNX2X_INIT_FILE_HDR_H
+
+struct bnx2x_fw_file_section {
+	__be32 len;
+	__be32 offset;
+};
+
+struct bnx2x_fw_file_hdr {
+	struct bnx2x_fw_file_section init_ops;
+	struct bnx2x_fw_file_section init_ops_offsets;
+	struct bnx2x_fw_file_section init_data;
+	struct bnx2x_fw_file_section tsem_int_table_data;
+	struct bnx2x_fw_file_section tsem_pram_data;
+	struct bnx2x_fw_file_section usem_int_table_data;
+	struct bnx2x_fw_file_section usem_pram_data;
+	struct bnx2x_fw_file_section csem_int_table_data;
+	struct bnx2x_fw_file_section csem_pram_data;
+	struct bnx2x_fw_file_section xsem_int_table_data;
+	struct bnx2x_fw_file_section xsem_pram_data;
+	struct bnx2x_fw_file_section fw_version;
+};
+
+#endif /* BNX2X_INIT_FILE_HDR_H */
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 39ba2936c0c..3ba4d888068 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,4 +1,5 @@
 /* bnx2x_init.h: Broadcom Everest network driver.
+ *               Structures and macroes needed during the initialization.
  *
  * Copyright (c) 2007-2009 Broadcom Corporation
  *
@@ -8,6 +9,7 @@
  *
  * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  * Written by: Eliezer Tamir
+ * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
  */
 
 #ifndef BNX2X_INIT_H
@@ -45,33 +47,71 @@
 #define OP_WR_64		0x8 /* write 64 bit pattern */
 #define OP_WB			0x9 /* copy a string using DMAE */
 
-/* Operation specific for E1 */
-#define OP_RD_E1		0xa /* read single register */
-#define OP_WR_E1		0xb /* write single register */
-#define OP_IW_E1		0xc /* write single register using mailbox */
-#define OP_SW_E1		0xd /* copy a string to the device */
-#define OP_SI_E1		0xe /* copy a string using mailbox */
-#define OP_ZR_E1		0xf /* clear memory */
-#define OP_ZP_E1		0x10 /* unzip then copy with DMAE */
-#define OP_WR_64_E1		0x11 /* write 64 bit pattern on E1 */
-#define OP_WB_E1		0x12 /* copy a string using DMAE */
-
-/* Operation specific for E1H */
-#define OP_RD_E1H		0x13 /* read single register */
-#define OP_WR_E1H		0x14 /* write single register */
-#define OP_IW_E1H		0x15 /* write single register using mailbox */
-#define OP_SW_E1H		0x16 /* copy a string to the device */
-#define OP_SI_E1H		0x17 /* copy a string using mailbox */
-#define OP_ZR_E1H		0x18 /* clear memory */
-#define OP_ZP_E1H		0x19 /* unzip then copy with DMAE */
-#define OP_WR_64_E1H		0x1a /* write 64 bit pattern on E1H */
-#define OP_WB_E1H		0x1b /* copy a string using DMAE */
-
 /* FPGA and EMUL specific operations */
-#define OP_WR_EMUL_E1H		0x1c /* write single register on E1H Emul */
-#define OP_WR_EMUL		0x1d /* write single register on Emulation */
-#define OP_WR_FPGA		0x1e /* write single register on FPGA */
-#define OP_WR_ASIC		0x1f /* write single register on ASIC */
+#define OP_WR_EMUL		0xa /* write single register on Emulation */
+#define OP_WR_FPGA		0xb /* write single register on FPGA */
+#define OP_WR_ASIC		0xc /* write single register on ASIC */
+
+/* Init stages */
+#define COMMON_STAGE            0
+#define PORT0_STAGE     	1
+#define PORT1_STAGE     	2
+/* Never reorder FUNCx stages !!! */
+#define FUNC0_STAGE     	3
+#define FUNC1_STAGE     	4
+#define FUNC2_STAGE     	5
+#define FUNC3_STAGE     	6
+#define FUNC4_STAGE     	7
+#define FUNC5_STAGE     	8
+#define FUNC6_STAGE     	9
+#define FUNC7_STAGE     	10
+#define STAGE_IDX_MAX   	11
+
+#define STAGE_START     	0
+#define STAGE_END       	1
+
+
+/* Indices of blocks */
+#define PRS_BLOCK               0
+#define SRCH_BLOCK              1
+#define TSDM_BLOCK              2
+#define TCM_BLOCK               3
+#define BRB1_BLOCK              4
+#define TSEM_BLOCK              5
+#define PXPCS_BLOCK             6
+#define EMAC0_BLOCK             7
+#define EMAC1_BLOCK             8
+#define DBU_BLOCK               9
+#define MISC_BLOCK              10
+#define DBG_BLOCK               11
+#define NIG_BLOCK               12
+#define MCP_BLOCK               13
+#define UPB_BLOCK               14
+#define CSDM_BLOCK              15
+#define USDM_BLOCK              16
+#define CCM_BLOCK               17
+#define UCM_BLOCK               18
+#define USEM_BLOCK              19
+#define CSEM_BLOCK              20
+#define XPB_BLOCK               21
+#define DQ_BLOCK                22
+#define TIMERS_BLOCK            23
+#define XSDM_BLOCK              24
+#define QM_BLOCK                25
+#define PBF_BLOCK               26
+#define XCM_BLOCK               27
+#define XSEM_BLOCK              28
+#define CDU_BLOCK               29
+#define DMAE_BLOCK              30
+#define PXP_BLOCK               31
+#define CFC_BLOCK               32
+#define HC_BLOCK                33
+#define PXP2_BLOCK              34
+#define MISC_AEU_BLOCK          35
+
+/* Returns the index of start or end of a specific block stage in ops array*/
+#define BLOCK_OPS_IDX(block, stage, end) \
+       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
 
 
 struct raw_op {
@@ -118,292 +158,6 @@ union init_op {
 	struct raw_op		raw;
 };
 
-#include "bnx2x_init_values.h"
-
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len);
-
-static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
-			      u32 len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		REG_WR(bp, addr + i*4, data[i]);
-		if (!(i % 10000)) {
-			touch_softlockup_watchdog();
-			cpu_relax();
-		}
-	}
-}
-
-static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
-			      u16 len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		REG_WR_IND(bp, addr + i*4, data[i]);
-		if (!(i % 10000)) {
-			touch_softlockup_watchdog();
-			cpu_relax();
-		}
-	}
-}
-
-static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
-{
-	int offset = 0;
-
-	if (bp->dmae_ready) {
-		while (len > DMAE_LEN32_WR_MAX) {
-			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-					 addr + offset, DMAE_LEN32_WR_MAX);
-			offset += DMAE_LEN32_WR_MAX * 4;
-			len -= DMAE_LEN32_WR_MAX;
-		}
-		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-				 addr + offset, len);
-	} else
-		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
-{
-	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
-	u32 buf_len32 = buf_len / 4;
-	int i;
-
-	memset(bp->gunzip_buf, fill, buf_len);
-
-	for (i = 0; i < len; i += buf_len32) {
-		u32 cur_len = min(buf_len32, len - i);
-
-		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
-	}
-}
-
-static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
-			     u32 len64)
-{
-	u32 buf_len32 = FW_BUF_SIZE / 4;
-	u32 len = len64 * 2;
-	u64 data64 = 0;
-	int i;
-
-	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
-	data64 = HILO_U64((*(data + 1)), (*data));
-	len64 = min((u32)(FW_BUF_SIZE/8), len64);
-	for (i = 0; i < len64; i++) {
-		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
-
-		*pdata = data64;
-	}
-
-	for (i = 0; i < len; i += buf_len32) {
-		u32 cur_len = min(buf_len32, len - i);
-
-		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
-	}
-}
-
-/*********************************************************
-   There are different blobs for each PRAM section.
-   In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contiguous buffer needed.
-   Thus, when we select a blob the address may be with some offset
-   from the beginning of PRAM section.
-   The same holds for the INT_TABLE sections.
-**********************************************************/
-#define IF_IS_INT_TABLE_ADDR(base, addr) \
-			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
-
-#define IF_IS_PRAM_ADDR(base, addr) \
-			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
-
-static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)
-{
-	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
-		data = is_e1 ? tsem_int_table_data_e1 :
-			       tsem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
-			data = is_e1 ? csem_int_table_data_e1 :
-				       csem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
-			data = is_e1 ? usem_int_table_data_e1 :
-				       usem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
-			data = is_e1 ? xsem_int_table_data_e1 :
-				       xsem_int_table_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
-			data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
-			data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
-			data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
-			data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
-
-	return data;
-}
-
-static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
-			     u32 len, int gunzip, int is_e1, u32 blob_off)
-{
-	int offset = 0;
-
-	data = bnx2x_sel_blob(addr, data, is_e1) + blob_off;
-
-	if (gunzip) {
-		int rc;
-#ifdef __BIG_ENDIAN
-		int i, size;
-		u32 *temp;
-
-		temp = kmalloc(len, GFP_KERNEL);
-		size = (len / 4) + ((len % 4) ? 1 : 0);
-		for (i = 0; i < size; i++)
-			temp[i] = swab32(data[i]);
-		data = temp;
-#endif
-		rc = bnx2x_gunzip(bp, (u8 *)data, len);
-		if (rc) {
-			BNX2X_ERR("gunzip failed ! rc %d\n", rc);
-#ifdef __BIG_ENDIAN
-			kfree(temp);
-#endif
-			return;
-		}
-		len = bp->gunzip_outlen;
-#ifdef __BIG_ENDIAN
-		kfree(temp);
-		for (i = 0; i < len; i++)
-			((u32 *)bp->gunzip_buf)[i] =
-					swab32(((u32 *)bp->gunzip_buf)[i]);
-#endif
-	} else {
-		if ((len * 4) > FW_BUF_SIZE) {
-			BNX2X_ERR("LARGE DMAE OPERATION ! "
-				  "addr 0x%x  len 0x%x\n", addr, len*4);
-			return;
-		}
-		memcpy(bp->gunzip_buf, data, len * 4);
-	}
-
-	if (bp->dmae_ready) {
-		while (len > DMAE_LEN32_WR_MAX) {
-			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-					 addr + offset, DMAE_LEN32_WR_MAX);
-			offset += DMAE_LEN32_WR_MAX * 4;
-			len -= DMAE_LEN32_WR_MAX;
-		}
-		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-				 addr + offset, len);
-	} else
-		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
-{
-	int is_e1       = CHIP_IS_E1(bp);
-	int is_e1h      = CHIP_IS_E1H(bp);
-	int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h);
-	int hw_wr, i;
-	union init_op *op;
-	u32 op_type, addr, len;
-	const u32 *data, *data_base;
-
-	if (CHIP_REV_IS_FPGA(bp))
-		hw_wr = OP_WR_FPGA;
-	else if (CHIP_REV_IS_EMUL(bp))
-		hw_wr = OP_WR_EMUL;
-	else
-		hw_wr = OP_WR_ASIC;
-
-	if (is_e1)
-		data_base = init_data_e1;
-	else /* CHIP_IS_E1H(bp) */
-		data_base = init_data_e1h;
-
-	for (i = op_start; i < op_end; i++) {
-
-		op = (union init_op *)&(init_ops[i]);
-
-		op_type = op->str_wr.op;
-		addr = op->str_wr.offset;
-		len = op->str_wr.data_len;
-		data = data_base + op->str_wr.data_off;
-
-		/* careful! it must be in order */
-		if (unlikely(op_type > OP_WB)) {
-
-			/* If E1 only */
-			if (op_type <= OP_WB_E1) {
-				if (is_e1)
-					op_type -= (OP_RD_E1 - OP_RD);
-
-			/* If E1H only */
-			} else if (op_type <= OP_WB_E1H) {
-				if (is_e1h)
-					op_type -= (OP_RD_E1H - OP_RD);
-			}
-
-			/* HW/EMUL specific */
-			if (op_type == hw_wr)
-				op_type = OP_WR;
-
-			/* EMUL on E1H is special */
-			if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h)
-				op_type = OP_WR;
-		}
-
-		switch (op_type) {
-		case OP_RD:
-			REG_RD(bp, addr);
-			break;
-		case OP_WR:
-			REG_WR(bp, addr, op->write.val);
-			break;
-		case OP_SW:
-			bnx2x_init_str_wr(bp, addr, data, len);
-			break;
-		case OP_WB:
-			bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0);
-			break;
-		case OP_SI:
-			bnx2x_init_ind_wr(bp, addr, data, len);
-			break;
-		case OP_ZR:
-			bnx2x_init_fill(bp, addr, 0, op->zero.len);
-			break;
-		case OP_ZP:
-			bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1,
-					 op->str_wr.data_off);
-			break;
-		case OP_WR_64:
-			bnx2x_init_wr_64(bp, addr, data, len);
-			break;
-		default:
-			/* happens whenever an op is of a diff HW */
-#if 0
-			DP(NETIF_MSG_HW, "skipping init operation  "
-			   "index %d[%d:%d]: type %d  addr 0x%x  "
-			   "len %d(0x%x)\n",
-			   i, op_start, op_end, op_type, addr, len, len);
-#endif
-			break;
-		}
-	}
-}
-
-
 /****************************************************************************
 * PXP
 ****************************************************************************/
@@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
 		PXP2_REG_RQ_BW_WR_UBOUND30}
 };
 
-static void bnx2x_init_pxp(struct bnx2x *bp)
-{
-	u16 devctl;
-	int r_order, w_order;
-	u32 val, i;
-
-	pci_read_config_word(bp->pdev,
-			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
-	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
-	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
-	if (bp->mrrs == -1)
-		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
-	else {
-		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
-		r_order = bp->mrrs;
-	}
-
-	if (r_order > MAX_RD_ORD) {
-		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
-		   r_order, MAX_RD_ORD);
-		r_order = MAX_RD_ORD;
-	}
-	if (w_order > MAX_WR_ORD) {
-		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
-		   w_order, MAX_WR_ORD);
-		w_order = MAX_WR_ORD;
-	}
-	if (CHIP_REV_IS_FPGA(bp)) {
-		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
-		w_order = 0;
-	}
-	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
-
-	for (i = 0; i < NUM_RD_Q-1; i++) {
-		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
-		REG_WR(bp, read_arb_addr[i].add,
-		       read_arb_data[i][r_order].add);
-		REG_WR(bp, read_arb_addr[i].ubound,
-		       read_arb_data[i][r_order].ubound);
-	}
-
-	for (i = 0; i < NUM_WR_Q-1; i++) {
-		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
-		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
-
-			REG_WR(bp, write_arb_addr[i].l,
-			       write_arb_data[i][w_order].l);
-
-			REG_WR(bp, write_arb_addr[i].add,
-			       write_arb_data[i][w_order].add);
-
-			REG_WR(bp, write_arb_addr[i].ubound,
-			       write_arb_data[i][w_order].ubound);
-		} else {
-
-			val = REG_RD(bp, write_arb_addr[i].l);
-			REG_WR(bp, write_arb_addr[i].l,
-			       val | (write_arb_data[i][w_order].l << 10));
-
-			val = REG_RD(bp, write_arb_addr[i].add);
-			REG_WR(bp, write_arb_addr[i].add,
-			       val | (write_arb_data[i][w_order].add << 10));
-
-			val = REG_RD(bp, write_arb_addr[i].ubound);
-			REG_WR(bp, write_arb_addr[i].ubound,
-			       val | (write_arb_data[i][w_order].ubound << 7));
-		}
-	}
-
-	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
-	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
-	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
-	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
-
-	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
-	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
-	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
-	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
-
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
-
-	if (r_order == MAX_RD_ORD)
-		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
-
-	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
-
-	if (CHIP_IS_E1H(bp)) {
-		val = ((w_order == 0) ? 2 : 3);
-		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
-		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
-	}
-}
-
 
 /****************************************************************************
 * CDU
@@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 	(0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
 #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val)	((_val) & ~0x80)
 
-/*****************************************************************************
- * Description:
- *         Calculates crc 8 on a word value: polynomial 0-1-2-8
- *         Code was translated from Verilog.
- ****************************************************************************/
-static u8 calc_crc8(u32 data, u8 crc)
-{
-	u8 D[32];
-	u8 NewCRC[8];
-	u8 C[8];
-	u8 crc_res;
-	u8 i;
-
-	/* split the data into 31 bits */
-	for (i = 0; i < 32; i++) {
-		D[i] = data & 1;
-		data = data >> 1;
-	}
-
-	/* split the crc into 8 bits */
-	for (i = 0; i < 8; i++) {
-		C[i] = crc & 1;
-		crc = crc >> 1;
-	}
-
-	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
-		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
-		C[6] ^ C[7];
-	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
-		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
-		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
-	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
-		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
-		C[0] ^ C[1] ^ C[4] ^ C[5];
-	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
-		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
-		C[1] ^ C[2] ^ C[5] ^ C[6];
-	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
-		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
-		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
-	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
-		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
-		C[3] ^ C[4] ^ C[7];
-	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
-		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
-		C[5];
-	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
-		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
-		C[6];
-
-	crc_res = 0;
-	for (i = 0; i < 8; i++)
-		crc_res |= (NewCRC[i] << i);
-
-	return crc_res;
-}
 
 /* registers addresses are not in order
    so these arrays help simplify the code */
-static const int cm_start[E1H_FUNC_MAX][9] = {
-	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
-	 XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START,
-	 XSEM_FUNC0_START},
-	{MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START,
-	 XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START,
-	 XSEM_FUNC1_START},
-	{MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START,
-	 XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START,
-	 XSEM_FUNC2_START},
-	{MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START,
-	 XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START,
-	 XSEM_FUNC3_START},
-	{MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START,
-	 XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START,
-	 XSEM_FUNC4_START},
-	{MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START,
-	 XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START,
-	 XSEM_FUNC5_START},
-	{MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START,
-	 XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START,
-	 XSEM_FUNC6_START},
-	{MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START,
-	 XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START,
-	 XSEM_FUNC7_START}
-};
-
-static const int cm_end[E1H_FUNC_MAX][9] = {
-	{MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END,
-	 XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END,
-	 XSEM_FUNC0_END},
-	{MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END,
-	 XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END,
-	 XSEM_FUNC1_END},
-	{MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END,
-	 XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END,
-	 XSEM_FUNC2_END},
-	{MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END,
-	 XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END,
-	 XSEM_FUNC3_END},
-	{MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END,
-	 XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END,
-	 XSEM_FUNC4_END},
-	{MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END,
-	 XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END,
-	 XSEM_FUNC5_END},
-	{MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END,
-	 XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END,
-	 XSEM_FUNC6_END},
-	{MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END,
-	 XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END,
-	 XSEM_FUNC7_END},
-};
-
-static const int hc_limits[E1H_FUNC_MAX][2] = {
-	{HC_FUNC0_START, HC_FUNC0_END},
-	{HC_FUNC1_START, HC_FUNC1_END},
-	{HC_FUNC2_START, HC_FUNC2_END},
-	{HC_FUNC3_START, HC_FUNC3_END},
-	{HC_FUNC4_START, HC_FUNC4_END},
-	{HC_FUNC5_START, HC_FUNC5_END},
-	{HC_FUNC6_START, HC_FUNC6_END},
-	{HC_FUNC7_START, HC_FUNC7_END}
+static const int cm_blocks[9] = {
+	MISC_BLOCK, TCM_BLOCK,  UCM_BLOCK,  CCM_BLOCK, XCM_BLOCK,
+	TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
 };
 
 #endif /* BNX2X_INIT_H */
diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h
new file mode 100644
index 00000000000..32552b9366c
--- /dev/null
+++ b/drivers/net/bnx2x_init_ops.h
@@ -0,0 +1,442 @@
+/* bnx2x_init_ops.h: Broadcom Everest network driver.
+ *               Static functions needed during the initialization.
+ *               This file is "included" in bnx2x_main.c.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ */
+#ifndef BNX2X_INIT_OPS_H
+#define BNX2X_INIT_OPS_H
+
+static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
+
+static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u32 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u16 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR_IND(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+{
+	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
+	u32 buf_len32 = buf_len / 4;
+	int i;
+
+	memset(bp->gunzip_buf, fill, buf_len);
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len64)
+{
+	u32 buf_len32 = FW_BUF_SIZE / 4;
+	u32 len = len64 * 2;
+	u64 data64 = 0;
+	int i;
+
+	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
+	data64 = HILO_U64((*(data + 1)), (*data));
+	len64 = min((u32)(FW_BUF_SIZE/8), len64);
+	for (i = 0; i < len64; i++) {
+		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
+
+		*pdata = data64;
+	}
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+/*********************************************************
+   There are different blobs for each PRAM section.
+   In addition, each blob write operation is divided into a few operations
+   in order to decrease the amount of phys. contiguous buffer needed.
+   Thus, when we select a blob the address may be with some offset
+   from the beginning of PRAM section.
+   The same holds for the INT_TABLE sections.
+**********************************************************/
+#define IF_IS_INT_TABLE_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
+
+#define IF_IS_PRAM_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
+
+static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data)
+{
+	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
+		data = bp->tsem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
+		data = bp->csem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
+		data = bp->usem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
+		data = bp->xsem_int_table_data;
+	else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
+		data = bp->tsem_pram_data;
+	else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
+		data = bp->csem_pram_data;
+	else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
+		data = bp->usem_pram_data;
+	else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
+		data = bp->xsem_pram_data;
+
+	return data;
+}
+
+static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len)
+{
+	/* This is needed for NO_ZIP mode, currently supported
+	   in little endian mode only */
+	data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data);
+
+	if ((len * 4) > FW_BUF_SIZE) {
+		BNX2X_ERR("LARGE DMAE OPERATION ! "
+			  "addr 0x%x  len 0x%x\n", addr, len*4);
+		return;
+	}
+	memcpy(bp->gunzip_buf, data, len * 4);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr,
+			     u32 len, u32 blob_off)
+{
+	int rc, i;
+        const u8 *data = NULL;
+
+	data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off;
+
+	if (data == NULL) {
+		panic("Blob not found for addr 0x%x\n", addr);
+		return;
+	}
+
+	rc = bnx2x_gunzip(bp, data, len);
+	if (rc) {
+		BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc);
+		BNX2X_ERR("blob_offset=0x%x\n", blob_off);
+		return;
+	}
+
+	/* gunzip_outlen is in dwords */
+	len = bp->gunzip_outlen;
+	for (i = 0; i < len; i++)
+		((u32 *)bp->gunzip_buf)[i] =
+			cpu_to_le32(((u32 *)bp->gunzip_buf)[i]);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage)
+{
+	int hw_wr, i;
+	u16 op_start =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)];
+	u16 op_end =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)];
+	union init_op *op;
+	u32 op_type, addr, len;
+	const u32 *data, *data_base;
+
+	/* If empty block */
+	if (op_start == op_end)
+		return;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		hw_wr = OP_WR_FPGA;
+	else if (CHIP_REV_IS_EMUL(bp))
+		hw_wr = OP_WR_EMUL;
+	else
+		hw_wr = OP_WR_ASIC;
+
+	data_base = bp->init_data;
+
+	for (i = op_start; i < op_end; i++) {
+
+		op = (union init_op *)&(bp->init_ops[i]);
+
+		op_type = op->str_wr.op;
+		addr = op->str_wr.offset;
+		len = op->str_wr.data_len;
+		data = data_base + op->str_wr.data_off;
+
+		/* HW/EMUL specific */
+		if (unlikely((op_type > OP_WB) && (op_type == hw_wr)))
+			op_type = OP_WR;
+
+		switch (op_type) {
+		case OP_RD:
+			REG_RD(bp, addr);
+			break;
+		case OP_WR:
+			REG_WR(bp, addr, op->write.val);
+			break;
+		case OP_SW:
+			bnx2x_init_str_wr(bp, addr, data, len);
+			break;
+		case OP_WB:
+			bnx2x_init_wr_wb(bp, addr, data, len);
+			break;
+		case OP_SI:
+			bnx2x_init_ind_wr(bp, addr, data, len);
+			break;
+		case OP_ZR:
+			bnx2x_init_fill(bp, addr, 0, op->zero.len);
+			break;
+		case OP_ZP:
+			bnx2x_init_wr_zp(bp, addr, len,
+					 op->str_wr.data_off);
+			break;
+		case OP_WR_64:
+			bnx2x_init_wr_64(bp, addr, data, len);
+			break;
+		default:
+			/* happens whenever an op is of a diff HW */
+#if 0
+			DP(NETIF_MSG_HW, "skipping init operation  "
+			   "index %d[%d:%d]: type %d  addr 0x%x  "
+			   "len %d(0x%x)\n",
+			   i, op_start, op_end, op_type, addr, len, len);
+#endif
+			break;
+		}
+	}
+}
+
+/* PXP */
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+	u16 devctl;
+	int r_order, w_order;
+	u32 val, i;
+
+	pci_read_config_word(bp->pdev,
+			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+	if (bp->mrrs == -1)
+		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+	else {
+		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+		r_order = bp->mrrs;
+	}
+
+	if (r_order > MAX_RD_ORD) {
+		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
+		   r_order, MAX_RD_ORD);
+		r_order = MAX_RD_ORD;
+	}
+	if (w_order > MAX_WR_ORD) {
+		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
+		   w_order, MAX_WR_ORD);
+		w_order = MAX_WR_ORD;
+	}
+	if (CHIP_REV_IS_FPGA(bp)) {
+		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
+		w_order = 0;
+	}
+	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
+
+	for (i = 0; i < NUM_RD_Q-1; i++) {
+		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
+		REG_WR(bp, read_arb_addr[i].add,
+		       read_arb_data[i][r_order].add);
+		REG_WR(bp, read_arb_addr[i].ubound,
+		       read_arb_data[i][r_order].ubound);
+	}
+
+	for (i = 0; i < NUM_WR_Q-1; i++) {
+		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
+		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
+
+			REG_WR(bp, write_arb_addr[i].l,
+			       write_arb_data[i][w_order].l);
+
+			REG_WR(bp, write_arb_addr[i].add,
+			       write_arb_data[i][w_order].add);
+
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       write_arb_data[i][w_order].ubound);
+		} else {
+
+			val = REG_RD(bp, write_arb_addr[i].l);
+			REG_WR(bp, write_arb_addr[i].l,
+			       val | (write_arb_data[i][w_order].l << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].add);
+			REG_WR(bp, write_arb_addr[i].add,
+			       val | (write_arb_data[i][w_order].add << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].ubound);
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       val | (write_arb_data[i][w_order].ubound << 7));
+		}
+	}
+
+	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
+	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
+	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
+
+	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
+	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
+	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
+
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
+
+	if (r_order == MAX_RD_ORD)
+		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
+
+	if (CHIP_IS_E1H(bp)) {
+		val = ((w_order == 0) ? 2 : 3);
+		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
+		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
+	}
+}
+
+/*****************************************************************************
+ * Description:
+ *         Calculates crc 8 on a word value: polynomial 0-1-2-8
+ *         Code was translated from Verilog.
+ ****************************************************************************/
+static u8 calc_crc8(u32 data, u8 crc)
+{
+	u8 D[32];
+	u8 NewCRC[8];
+	u8 C[8];
+	u8 crc_res;
+	u8 i;
+
+	/* split the data into 31 bits */
+	for (i = 0; i < 32; i++) {
+		D[i] = data & 1;
+		data = data >> 1;
+	}
+
+	/* split the crc into 8 bits */
+	for (i = 0; i < 8; i++) {
+		C[i] = crc & 1;
+		crc = crc >> 1;
+	}
+
+	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+		C[6] ^ C[7];
+	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
+	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+		C[0] ^ C[1] ^ C[4] ^ C[5];
+	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+		C[1] ^ C[2] ^ C[5] ^ C[6];
+	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+		C[3] ^ C[4] ^ C[7];
+	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+		C[5];
+	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+		C[6];
+
+	crc_res = 0;
+	for (i = 0; i < 8; i++)
+		crc_res |= (NewCRC[i] << i);
+
+	return crc_res;
+}
+
+#endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bnx2x_init_values.h b/drivers/net/bnx2x_init_values.h
deleted file mode 100644
index 1f22c9ab66d..00000000000
--- a/drivers/net/bnx2x_init_values.h
+++ /dev/null
@@ -1,16322 +0,0 @@
-#ifndef __BNX2X_INIT_VALUES_H__
-#define __BNX2X_INIT_VALUES_H__
-
-/* bnx2x_init_values.h: Broadcom NX2 10G network driver.
- *
- * Copyright (c) 2007-2009 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, except as noted below.
- *
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2007-2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- *
- *
- * This array contains the list of operations needed to initialize the chip.
- *
- * For each block in the chip there are three init stages:
- * common - HW used by both ports,
- * port1 and port2 - initialization for a specific Ethernet port.
- * When a port is opened or closed, the management CPU tells the driver
- * whether to init/disable common HW in addition to the port HW.
- * This way the first port going up will first initializes the common HW,
- * and the last port going down also resets the common HW
- *
- * For each init stage/block there is a list of actions needed in a format:
- * {operation, register, data}
- * where:
- * OP_WR - write a value to the chip.
- * OP_RD - read a register (usually a clear on read register).
- * OP_SW - string write, write a section of consecutive addresses to the chip.
- * OP_SI - copy a string using indirect writes.
- * OP_ZR - clear a range of memory.
- * OP_ZP - unzip and copy using DMAE.
- * OP_WB - string copy using DMAE.
- *
- * The #defines mark the stages.
- *
- */
-
-static const struct raw_op init_ops[] = {
-#define PRS_COMMON_START        0
-	{OP_WR, PRS_REG_INC_VALUE, 0xf},
-	{OP_WR, PRS_REG_EVENT_ID_1, 0x45},
-	{OP_WR, PRS_REG_EVENT_ID_2, 0x84},
-	{OP_WR, PRS_REG_EVENT_ID_3, 0x6},
-	{OP_WR, PRS_REG_NO_MATCH_EVENT_ID, 0x4},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_0, 0x0},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_1, 0x12170000},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_2, 0x22170000},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_3, 0x32170000},
-	{OP_ZR, PRS_REG_CM_HDR_TYPE_4, 0x5},
-	{OP_WR, PRS_REG_CM_HDR_LOOPBACK_TYPE_1, 0x12150000},
-	{OP_WR, PRS_REG_CM_HDR_LOOPBACK_TYPE_2, 0x22150000},
-	{OP_WR, PRS_REG_CM_HDR_LOOPBACK_TYPE_3, 0x32150000},
-	{OP_ZR, PRS_REG_CM_HDR_LOOPBACK_TYPE_4, 0x4},
-	{OP_WR, PRS_REG_CM_NO_MATCH_HDR, 0x2100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0, 0x100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1, 0x10100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2, 0x20100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3, 0x30100000},
-	{OP_ZR_E1, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4, 0x4},
-	{OP_WR_E1H, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4, 0x40100000},
-	{OP_ZR_E1H, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5, 0x3},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0, 0x100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1, 0x12140000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2, 0x22140000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3, 0x32140000},
-	{OP_ZR_E1, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4, 0x4},
-	{OP_WR_E1H, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4, 0x42140000},
-	{OP_ZR_E1H, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5, 0x3},
-	{OP_RD, PRS_REG_NUM_OF_PACKETS, 0x0},
-	{OP_RD, PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES, 0x0},
-	{OP_RD, PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES, 0x0},
-	{OP_RD, PRS_REG_NUM_OF_DEAD_CYCLES, 0x0},
-	{OP_WR_E1H, PRS_REG_FCOE_TYPE, 0x8906},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_0, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_1, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_2, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_3, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_4, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_5, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_6, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_7, 0xff},
-	{OP_WR, PRS_REG_PURE_REGIONS, 0x3e},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_0, 0x0},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_1, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_2, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_3, 0x3f},
-	{OP_WR_E1, PRS_REG_PACKET_REGIONS_TYPE_4, 0x0},
-	{OP_WR_E1H, PRS_REG_PACKET_REGIONS_TYPE_4, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_5, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_6, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_7, 0x3f},
-#define PRS_COMMON_END          52
-#define SRCH_COMMON_START       52
-	{OP_WR_E1H, SRC_REG_E1HMF_ENABLE, 0x1},
-#define SRCH_COMMON_END         53
-#define TSDM_COMMON_START       53
-	{OP_WR_E1, TSDM_REG_CFC_RSP_START_ADDR, 0x411},
-	{OP_WR_E1H, TSDM_REG_CFC_RSP_START_ADDR, 0x211},
-	{OP_WR_E1, TSDM_REG_CMP_COUNTER_START_ADDR, 0x400},
-	{OP_WR_E1H, TSDM_REG_CMP_COUNTER_START_ADDR, 0x200},
-	{OP_WR_E1, TSDM_REG_Q_COUNTER_START_ADDR, 0x404},
-	{OP_WR_E1H, TSDM_REG_Q_COUNTER_START_ADDR, 0x204},
-	{OP_WR_E1, TSDM_REG_PCK_END_MSG_START_ADDR, 0x419},
-	{OP_WR_E1H, TSDM_REG_PCK_END_MSG_START_ADDR, 0x219},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_ZR_E1, TSDM_REG_AGG_INT_EVENT_0, 0x2},
-	{OP_WR_E1H, TSDM_REG_AGG_INT_EVENT_0, 0x20},
-	{OP_WR_E1H, TSDM_REG_AGG_INT_EVENT_1, 0x0},
-	{OP_WR, TSDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, TSDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_ZR_E1, TSDM_REG_AGG_INT_EVENT_4, 0x7c},
-	{OP_ZR_E1H, TSDM_REG_AGG_INT_EVENT_4, 0x1c},
-	{OP_WR_E1H, TSDM_REG_AGG_INT_T_0, 0x1},
-	{OP_ZR_E1H, TSDM_REG_AGG_INT_T_1, 0x5f},
-	{OP_WR, TSDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, TSDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, TSDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, TSDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, TSDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, TSDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, TSDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, TSDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, TSDM_REG_TIMER_TICK, 0xa},
-#define TSDM_COMMON_END         96
-#define TCM_COMMON_START        96
-	{OP_WR, TCM_REG_XX_MAX_LL_SZ, 0x20},
-	{OP_WR, TCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, TCM_REG_TQM_TCM_HDR_P, 0x2150020},
-	{OP_WR, TCM_REG_TQM_TCM_HDR_S, 0x2150020},
-	{OP_WR, TCM_REG_TM_TCM_HDR, 0x30},
-	{OP_WR, TCM_REG_ERR_TCM_HDR, 0x8100000},
-	{OP_WR, TCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, TCM_REG_EXPR_EVNT_ID, 0x30},
-	{OP_WR, TCM_REG_STOP_EVNT_ID, 0x31},
-	{OP_WR, TCM_REG_STORM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_PRS_WEIGHT, 0x5},
-	{OP_WR, TCM_REG_PBF_WEIGHT, 0x6},
-	{OP_WR, TCM_REG_USEM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_CSEM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_CP_WEIGHT, 0x0},
-	{OP_WR, TCM_REG_TSDM_WEIGHT, 0x5},
-	{OP_WR, TCM_REG_TQM_P_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_TQM_S_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_TM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_TCM_TQM_USE_Q, 0x1},
-	{OP_WR, TCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, TCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, TCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, TCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, TCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, TCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, TCM_REG_TQM_INIT_CRD, 0x20},
-	{OP_WR, TCM_REG_XX_INIT_CRD, 0x13},
-	{OP_WR, TCM_REG_XX_MSG_NUM, 0x20},
-	{OP_ZR, TCM_REG_XX_TABLE, 0xa},
-	{OP_SW, TCM_REG_XX_DESCR_TABLE, 0x200000},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_0, 0x7},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_1, 0x7},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_2, 0x8},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_3, 0x8},
-	{OP_ZR_E1, TCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR_E1H, TCM_REG_N_SM_CTX_LD_4, 0x1},
-	{OP_ZR_E1H, TCM_REG_N_SM_CTX_LD_5, 0x3},
-	{OP_WR, TCM_REG_TCM_REG0_SZ, 0x6},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM0_0, 0xd},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM0_1, 0x2d},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM1_0, 0x7},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM1_1, 0x27},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM3_0, 0x7},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM3_1, 0x27},
-	{OP_WR, TCM_REG_TCM_STORM0_IFEN, 0x1},
-	{OP_WR, TCM_REG_TCM_STORM1_IFEN, 0x1},
-	{OP_WR, TCM_REG_TCM_TQM_IFEN, 0x1},
-	{OP_WR, TCM_REG_STORM_TCM_IFEN, 0x1},
-	{OP_WR, TCM_REG_TQM_TCM_IFEN, 0x1},
-	{OP_WR, TCM_REG_TSDM_IFEN, 0x1},
-	{OP_WR, TCM_REG_TM_TCM_IFEN, 0x1},
-	{OP_WR, TCM_REG_PRS_IFEN, 0x1},
-	{OP_WR, TCM_REG_PBF_IFEN, 0x1},
-	{OP_WR, TCM_REG_USEM_IFEN, 0x1},
-	{OP_WR, TCM_REG_CSEM_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, TCM_REG_TCM_CFC_IFEN, 0x1},
-#define TCM_COMMON_END          159
-#define TCM_FUNC0_START         159
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0xd},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x7},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x7},
-#define TCM_FUNC0_END           163
-#define TCM_FUNC1_START         163
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x2d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x27},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x27},
-#define TCM_FUNC1_END           167
-#define TCM_FUNC2_START         167
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0x1d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x17},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x17},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x17},
-#define TCM_FUNC2_END           171
-#define TCM_FUNC3_START         171
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x3d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x37},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x37},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x37},
-#define TCM_FUNC3_END           175
-#define TCM_FUNC4_START         175
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0x4d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x47},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x47},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x47},
-#define TCM_FUNC4_END           179
-#define TCM_FUNC5_START         179
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x6d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x67},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x67},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x67},
-#define TCM_FUNC5_END           183
-#define TCM_FUNC6_START         183
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0x5d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x57},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x57},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x57},
-#define TCM_FUNC6_END           187
-#define TCM_FUNC7_START         187
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x7d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x77},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x77},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x77},
-#define TCM_FUNC7_END           191
-#define BRB1_COMMON_START       191
-	{OP_SW, BRB1_REG_LL_RAM, 0x2000020},
-	{OP_WR, BRB1_REG_SOFT_RESET, 0x1},
-	{OP_RD, BRB1_REG_NUM_OF_FULL_CYCLES_4, 0x0},
-	{OP_SW, BRB1_REG_FREE_LIST_PRS_CRDT, 0x30220},
-	{OP_WR, BRB1_REG_SOFT_RESET, 0x0},
-#define BRB1_COMMON_END         196
-#define BRB1_PORT0_START        196
-	{OP_WR_E1, BRB1_REG_PAUSE_LOW_THRESHOLD_0, 0xb8},
-	{OP_WR_E1, BRB1_REG_PAUSE_HIGH_THRESHOLD_0, 0x114},
-	{OP_RD, BRB1_REG_NUM_OF_PAUSE_CYCLES_0, 0x0},
-	{OP_RD, BRB1_REG_NUM_OF_FULL_CYCLES_0, 0x0},
-#define BRB1_PORT0_END          200
-#define BRB1_PORT1_START        200
-	{OP_WR_E1, BRB1_REG_PAUSE_LOW_THRESHOLD_1, 0xb8},
-	{OP_WR_E1, BRB1_REG_PAUSE_HIGH_THRESHOLD_1, 0x114},
-	{OP_RD, BRB1_REG_NUM_OF_PAUSE_CYCLES_1, 0x0},
-	{OP_RD, BRB1_REG_NUM_OF_FULL_CYCLES_1, 0x0},
-#define BRB1_PORT1_END          204
-#define TSEM_COMMON_START       204
-	{OP_RD, TSEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, TSEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, TSEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, TSEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, TSEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, TSEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, TSEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, TSEM_REG_TS_0_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_1_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_2_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_3_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_4_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_5_AS, 0x3},
-	{OP_WR, TSEM_REG_TS_6_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_7_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_8_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_9_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_10_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_11_AS, 0x3},
-	{OP_WR, TSEM_REG_TS_12_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_13_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_14_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_15_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_16_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, TSEM_REG_TS_18_AS, 0x2},
-	{OP_WR, TSEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, TSEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, TSEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, TSEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, TSEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, TSEM_REG_THREADS_LIST, 0xff},
-	{OP_ZR, TSEM_REG_PASSIVE_BUFFER, 0x400},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18000, 0x34},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18040, 0x18},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18080, 0xc},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x180c0, 0x20},
-	{OP_WR_ASIC, TSEM_REG_FAST_MEMORY + 0x18300, 0x7a120},
-	{OP_WR_EMUL, TSEM_REG_FAST_MEMORY + 0x18300, 0x138},
-	{OP_WR_FPGA, TSEM_REG_FAST_MEMORY + 0x18300, 0x1388},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2000, 0xb2},
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x23c8, 0xc1},
-	{OP_WR_EMUL_E1H, TSEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x23c8 + 0x304, 0x10223},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x1000, 0x2b3},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x1000 + 0xacc, 0x10223},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xa020, 0xc8},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1c18, 0x4},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xa000, 0x2},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1c10, 0x2},
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x1ad0, 0x0},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x800, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x1ad8, 0x4},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x808, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3678, 0x6},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x810, 0x4},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3670, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1fb0, 0x40224},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5000, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x4cb0, 0x80228},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5008, 0x4},
-	{OP_ZP_E1, TSEM_REG_INT_TABLE, 0x930000},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5018, 0x4},
-	{OP_WR_64_E1, TSEM_REG_INT_TABLE + 0x360, 0x140230},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5028, 0x4},
-	{OP_ZP_E1, TSEM_REG_PRAM, 0x324f0000},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5038, 0x4},
-	{OP_ZP_E1, TSEM_REG_PRAM + 0x8000, 0x33250c94},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5048, 0x4},
-	{OP_ZP_E1, TSEM_REG_PRAM + 0x10000, 0xe4d195e},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5058, 0x4},
-	{OP_WR_64_E1, TSEM_REG_PRAM + 0x11e00, 0x5c400232},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5068, 0x4},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5078, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4008, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x62c0, 0x200224},
-	{OP_ZP_E1H, TSEM_REG_INT_TABLE, 0x9b0000},
-	{OP_WR_64_E1H, TSEM_REG_INT_TABLE + 0x398, 0xd0244},
-	{OP_ZP_E1H, TSEM_REG_PRAM, 0x325e0000},
-	{OP_ZP_E1H, TSEM_REG_PRAM + 0x8000, 0x35960c98},
-	{OP_ZP_E1H, TSEM_REG_PRAM + 0x10000, 0x1aea19fe},
-	{OP_WR_64_E1H, TSEM_REG_PRAM + 0x143d0, 0x57860246},
-#define TSEM_COMMON_END         297
-#define TSEM_PORT0_START        297
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x22c8, 0x20},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x2000, 0x16c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x4000, 0x16c},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb000, 0x28},
-	{OP_WR_E1, TSEM_REG_FAST_MEMORY + 0x4b60, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb140, 0xc},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1400, 0xa},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x32c0, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1450, 0x6},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3350, 0x64},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1500, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x8108, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1500 + 0x8, 0x50234},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1500 + 0x1c, 0x7},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1570, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x9c0, 0x4c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x800, 0x2},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x820, 0xe},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1fb0, 0x20239},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2908, 0x2},
-#define TSEM_PORT0_END          317
-#define TSEM_PORT1_START        317
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2348, 0x20},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x25b0, 0x16c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x45b0, 0x16c},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb0a0, 0x28},
-	{OP_WR_E1, TSEM_REG_FAST_MEMORY + 0x4b64, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb170, 0xc},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1428, 0xa},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3308, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1468, 0x6},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x34e0, 0x64},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1538, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x8110, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1538 + 0x8, 0x5023b},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1538 + 0x1c, 0x7},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x15b8, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0xaf0, 0x4c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x808, 0x2},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x858, 0xe},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1fb8, 0x20240},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2910, 0x2},
-#define TSEM_PORT1_END          337
-#define TSEM_FUNC0_START        337
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b60, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3000, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3000 + 0x8, 0x50248},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3000 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x31c0, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5000, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5080, 0x12},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4000, 0x2},
-#define TSEM_FUNC0_END          345
-#define TSEM_FUNC1_START        345
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b64, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3038, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3038 + 0x8, 0x5024d},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3038 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x31e0, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5010, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x50c8, 0x12},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4008, 0x2},
-#define TSEM_FUNC1_END          353
-#define TSEM_FUNC2_START        353
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b68, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3070, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3070 + 0x8, 0x50252},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3070 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3200, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5020, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5110, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4010, 0x20257},
-#define TSEM_FUNC2_END          361
-#define TSEM_FUNC3_START        361
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b6c, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30a8, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x30a8 + 0x8, 0x50259},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30a8 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3220, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5030, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5158, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4018, 0x2025e},
-#define TSEM_FUNC3_END          369
-#define TSEM_FUNC4_START        369
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b70, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30e0, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x30e0 + 0x8, 0x50260},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30e0 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3240, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5040, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x51a0, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4020, 0x20265},
-#define TSEM_FUNC4_END          377
-#define TSEM_FUNC5_START        377
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b74, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3118, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3118 + 0x8, 0x50267},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3118 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3260, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5050, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x51e8, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4028, 0x2026c},
-#define TSEM_FUNC5_END          385
-#define TSEM_FUNC6_START        385
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b78, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3150, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3150 + 0x8, 0x5026e},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3150 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3280, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5060, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5230, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4030, 0x20273},
-#define TSEM_FUNC6_END          393
-#define TSEM_FUNC7_START        393
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b7c, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3188, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3188 + 0x8, 0x50275},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3188 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x32a0, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5070, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5278, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4038, 0x2027a},
-#define TSEM_FUNC7_END          401
-#define MISC_COMMON_START       401
-	{OP_WR_E1, MISC_REG_GRC_TIMEOUT_EN, 0x1},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_1, 0x71d2911},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_2, 0x0},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_3, 0x9c0424},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_4, 0x0},
-	{OP_WR, MISC_REG_LCPLL_CTRL_1, 0x209},
-	{OP_WR_E1, MISC_REG_SPIO, 0xff000000},
-#define MISC_COMMON_END         408
-#define MISC_FUNC0_START        408
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC0_END          409
-#define MISC_FUNC1_START        409
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC1_END          410
-#define MISC_FUNC2_START        410
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC2_END          411
-#define MISC_FUNC3_START        411
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC3_END          412
-#define MISC_FUNC4_START        412
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC4_END          413
-#define MISC_FUNC5_START        413
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC5_END          414
-#define MISC_FUNC6_START        414
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC6_END          415
-#define MISC_FUNC7_START        415
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC7_END          416
-#define NIG_COMMON_START        416
-	{OP_WR, NIG_REG_PBF_LB_IN_EN, 0x1},
-	{OP_WR, NIG_REG_PRS_REQ_IN_EN, 0x1},
-	{OP_WR, NIG_REG_EGRESS_DEBUG_IN_EN, 0x1},
-	{OP_WR, NIG_REG_BRB_LB_OUT_EN, 0x1},
-	{OP_WR, NIG_REG_PRS_EOP_OUT_EN, 0x1},
-#define NIG_COMMON_END          421
-#define NIG_PORT0_START         421
-	{OP_WR, NIG_REG_LLH0_CM_HEADER, 0x300000},
-	{OP_WR, NIG_REG_LLH0_EVENT_ID, 0x28},
-	{OP_WR, NIG_REG_LLH0_ERROR_MASK, 0x0},
-	{OP_WR, NIG_REG_LLH0_XCM_MASK, 0x4},
-	{OP_WR, NIG_REG_LLH0_BRB1_NOT_MCP, 0x1},
-	{OP_WR, NIG_REG_STATUS_INTERRUPT_PORT0, 0x0},
-	{OP_WR_E1H, NIG_REG_LLH0_CLS_TYPE, 0x1},
-	{OP_WR, NIG_REG_LLH0_XCM_INIT_CREDIT, 0x30},
-	{OP_WR, NIG_REG_BRB0_PAUSE_IN_EN, 0x1},
-	{OP_WR, NIG_REG_EGRESS_PBF0_IN_EN, 0x1},
-	{OP_WR, NIG_REG_BRB0_OUT_EN, 0x1},
-	{OP_WR, NIG_REG_XCM0_OUT_EN, 0x1},
-#define NIG_PORT0_END           433
-#define NIG_PORT1_START         433
-	{OP_WR, NIG_REG_LLH1_CM_HEADER, 0x300000},
-	{OP_WR, NIG_REG_LLH1_EVENT_ID, 0x28},
-	{OP_WR, NIG_REG_LLH1_ERROR_MASK, 0x0},
-	{OP_WR, NIG_REG_LLH1_XCM_MASK, 0x4},
-	{OP_WR, NIG_REG_LLH1_BRB1_NOT_MCP, 0x1},
-	{OP_WR, NIG_REG_STATUS_INTERRUPT_PORT1, 0x0},
-	{OP_WR_E1H, NIG_REG_LLH1_CLS_TYPE, 0x1},
-	{OP_WR, NIG_REG_LLH1_XCM_INIT_CREDIT, 0x30},
-	{OP_WR, NIG_REG_BRB1_PAUSE_IN_EN, 0x1},
-	{OP_WR, NIG_REG_EGRESS_PBF1_IN_EN, 0x1},
-	{OP_WR, NIG_REG_BRB1_OUT_EN, 0x1},
-	{OP_WR, NIG_REG_XCM1_OUT_EN, 0x1},
-#define NIG_PORT1_END           445
-#define UPB_COMMON_START        445
-	{OP_WR, GRCBASE_UPB + PB_REG_CONTROL, 0x20},
-#define UPB_COMMON_END          446
-#define CSDM_COMMON_START       446
-	{OP_WR_E1, CSDM_REG_CFC_RSP_START_ADDR, 0xa11},
-	{OP_WR_E1H, CSDM_REG_CFC_RSP_START_ADDR, 0x211},
-	{OP_WR_E1, CSDM_REG_CMP_COUNTER_START_ADDR, 0xa00},
-	{OP_WR_E1H, CSDM_REG_CMP_COUNTER_START_ADDR, 0x200},
-	{OP_WR_E1, CSDM_REG_Q_COUNTER_START_ADDR, 0xa04},
-	{OP_WR_E1H, CSDM_REG_Q_COUNTER_START_ADDR, 0x204},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_0, 0xc6},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_1, 0x0},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_ZR, CSDM_REG_AGG_INT_EVENT_4, 0x1c},
-	{OP_WR, CSDM_REG_AGG_INT_T_0, 0x1},
-	{OP_ZR, CSDM_REG_AGG_INT_T_1, 0x5f},
-	{OP_WR, CSDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, CSDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, CSDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, CSDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, CSDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, CSDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, CSDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, CSDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, CSDM_REG_TIMER_TICK, 0xa},
-#define CSDM_COMMON_END         485
-#define USDM_COMMON_START       485
-	{OP_WR_E1, USDM_REG_CFC_RSP_START_ADDR, 0xa11},
-	{OP_WR_E1H, USDM_REG_CFC_RSP_START_ADDR, 0x411},
-	{OP_WR_E1, USDM_REG_CMP_COUNTER_START_ADDR, 0xa00},
-	{OP_WR_E1H, USDM_REG_CMP_COUNTER_START_ADDR, 0x400},
-	{OP_WR_E1, USDM_REG_Q_COUNTER_START_ADDR, 0xa04},
-	{OP_WR_E1H, USDM_REG_Q_COUNTER_START_ADDR, 0x404},
-	{OP_WR_E1, USDM_REG_PCK_END_MSG_START_ADDR, 0xa21},
-	{OP_WR_E1H, USDM_REG_PCK_END_MSG_START_ADDR, 0x421},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_0, 0x46},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_1, 0x5},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_ZR_E1, USDM_REG_AGG_INT_EVENT_4, 0x5c},
-	{OP_WR_E1H, USDM_REG_AGG_INT_EVENT_4, 0x7},
-	{OP_ZR_E1H, USDM_REG_AGG_INT_EVENT_5, 0x5b},
-	{OP_WR, USDM_REG_AGG_INT_MODE_0, 0x1},
-	{OP_ZR_E1, USDM_REG_AGG_INT_MODE_1, 0x1f},
-	{OP_ZR_E1H, USDM_REG_AGG_INT_MODE_1, 0x3},
-	{OP_WR_E1H, USDM_REG_AGG_INT_MODE_4, 0x1},
-	{OP_ZR_E1H, USDM_REG_AGG_INT_MODE_5, 0x1b},
-	{OP_WR, USDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, USDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, USDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, USDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, USDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q2_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, USDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, USDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, USDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, USDM_REG_TIMER_TICK, 0xa},
-#define USDM_COMMON_END         532
-#define CCM_COMMON_START        532
-	{OP_WR, CCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, CCM_REG_CQM_CCM_HDR_P, 0x2150020},
-	{OP_WR, CCM_REG_CQM_CCM_HDR_S, 0x2150020},
-	{OP_WR, CCM_REG_ERR_CCM_HDR, 0x8100000},
-	{OP_WR, CCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, CCM_REG_STORM_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_TSEM_WEIGHT, 0x0},
-	{OP_WR, CCM_REG_XSEM_WEIGHT, 0x5},
-	{OP_WR, CCM_REG_USEM_WEIGHT, 0x5},
-	{OP_ZR, CCM_REG_PBF_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_CSDM_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_CQM_P_WEIGHT, 0x3},
-	{OP_WR, CCM_REG_CQM_S_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_CCM_CQM_USE_Q, 0x1},
-	{OP_WR, CCM_REG_CNT_AUX1_Q, 0x2},
-	{OP_WR, CCM_REG_CNT_AUX2_Q, 0x2},
-	{OP_WR, CCM_REG_INV_DONE_Q, 0x1},
-	{OP_WR, CCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, CCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, CCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, CCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, CCM_REG_CQM_INIT_CRD, 0x20},
-	{OP_WR, CCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, CCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, CCM_REG_XX_INIT_CRD, 0x3},
-	{OP_WR, CCM_REG_XX_MSG_NUM, 0x18},
-	{OP_ZR, CCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, CCM_REG_XX_DESCR_TABLE, 0x240242},
-	{OP_SW_E1H, CCM_REG_XX_DESCR_TABLE, 0x24027c},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_0, 0x1},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_1, 0x2},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_2, 0x8},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_3, 0x8},
-	{OP_ZR, CCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR, CCM_REG_CCM_REG0_SZ, 0x4},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM0_0, 0x9},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM0_1, 0x29},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM1_0, 0xa},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM1_1, 0x2a},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM3_0, 0x7},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM3_1, 0x27},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM1_0, 0xc},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM1_1, 0x2c},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM2_0, 0xc},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM2_1, 0x2c},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM3_0, 0xc},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM3_1, 0x2c},
-	{OP_WR, CCM_REG_CCM_STORM0_IFEN, 0x1},
-	{OP_WR, CCM_REG_CCM_STORM1_IFEN, 0x1},
-	{OP_WR, CCM_REG_CCM_CQM_IFEN, 0x1},
-	{OP_WR, CCM_REG_STORM_CCM_IFEN, 0x1},
-	{OP_WR, CCM_REG_CQM_CCM_IFEN, 0x1},
-	{OP_WR, CCM_REG_CSDM_IFEN, 0x1},
-	{OP_WR, CCM_REG_TSEM_IFEN, 0x1},
-	{OP_WR, CCM_REG_XSEM_IFEN, 0x1},
-	{OP_WR, CCM_REG_USEM_IFEN, 0x1},
-	{OP_WR, CCM_REG_PBF_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, CCM_REG_CCM_CFC_IFEN, 0x1},
-#define CCM_COMMON_END          596
-#define CCM_FUNC0_START         596
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x9},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0xa},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x7},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0xc},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0xb},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x7},
-#define CCM_FUNC0_END           603
-#define CCM_FUNC1_START         603
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x29},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x2a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x27},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x2c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x2b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x27},
-#define CCM_FUNC1_END           610
-#define CCM_FUNC2_START         610
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x19},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0x1a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x17},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x17},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0x1c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0x1b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x17},
-#define CCM_FUNC2_END           617
-#define CCM_FUNC3_START         617
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x39},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x3a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x37},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x37},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x3c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x3b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x37},
-#define CCM_FUNC3_END           624
-#define CCM_FUNC4_START         624
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x49},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0x4a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x47},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x47},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0x4c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0x4b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x47},
-#define CCM_FUNC4_END           631
-#define CCM_FUNC5_START         631
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x69},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x6a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x67},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x67},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x6c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x6b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x67},
-#define CCM_FUNC5_END           638
-#define CCM_FUNC6_START         638
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x59},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0x5a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x57},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x57},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0x5c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0x5b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x57},
-#define CCM_FUNC6_END           645
-#define CCM_FUNC7_START         645
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x79},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x7a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x77},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x77},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x7c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x7b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x77},
-#define CCM_FUNC7_END           652
-#define UCM_COMMON_START        652
-	{OP_WR, UCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, UCM_REG_UQM_UCM_HDR_P, 0x2150020},
-	{OP_WR, UCM_REG_UQM_UCM_HDR_S, 0x2150020},
-	{OP_WR, UCM_REG_TM_UCM_HDR, 0x30},
-	{OP_WR, UCM_REG_ERR_UCM_HDR, 0x8100000},
-	{OP_WR, UCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, UCM_REG_EXPR_EVNT_ID, 0x30},
-	{OP_WR, UCM_REG_STOP_EVNT_ID, 0x31},
-	{OP_WR, UCM_REG_STORM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_TSEM_WEIGHT, 0x4},
-	{OP_WR, UCM_REG_CSEM_WEIGHT, 0x0},
-	{OP_WR, UCM_REG_XSEM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_DORQ_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_CP_WEIGHT, 0x0},
-	{OP_WR, UCM_REG_USDM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_UQM_P_WEIGHT, 0x7},
-	{OP_WR, UCM_REG_UQM_S_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_TM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_UCM_UQM_USE_Q, 0x1},
-	{OP_WR, UCM_REG_INV_CFLG_Q, 0x1},
-	{OP_WR, UCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, UCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, UCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, UCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, UCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, UCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, UCM_REG_TM_INIT_CRD, 0x4},
-	{OP_WR, UCM_REG_UQM_INIT_CRD, 0x20},
-	{OP_WR, UCM_REG_XX_INIT_CRD, 0xe},
-	{OP_WR, UCM_REG_XX_MSG_NUM, 0x1b},
-	{OP_ZR, UCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, UCM_REG_XX_DESCR_TABLE, 0x1b0266},
-	{OP_SW_E1H, UCM_REG_XX_DESCR_TABLE, 0x1b02a0},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_0, 0x10},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_1, 0x7},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_2, 0xf},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_3, 0x10},
-	{OP_ZR_E1, UCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR_E1H, UCM_REG_N_SM_CTX_LD_4, 0xb},
-	{OP_ZR_E1H, UCM_REG_N_SM_CTX_LD_5, 0x3},
-	{OP_WR, UCM_REG_UCM_REG0_SZ, 0x3},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM0_0, 0xf},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM0_1, 0x2f},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM1_0, 0xe},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM1_1, 0x2e},
-	{OP_WR, UCM_REG_UCM_STORM0_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_STORM1_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_UQM_IFEN, 0x1},
-	{OP_WR, UCM_REG_STORM_UCM_IFEN, 0x1},
-	{OP_WR, UCM_REG_UQM_UCM_IFEN, 0x1},
-	{OP_WR, UCM_REG_USDM_IFEN, 0x1},
-	{OP_WR, UCM_REG_TM_UCM_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_TM_IFEN, 0x1},
-	{OP_WR, UCM_REG_TSEM_IFEN, 0x1},
-	{OP_WR, UCM_REG_CSEM_IFEN, 0x1},
-	{OP_WR, UCM_REG_XSEM_IFEN, 0x1},
-	{OP_WR, UCM_REG_DORQ_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_CFC_IFEN, 0x1},
-#define UCM_COMMON_END          714
-#define UCM_FUNC0_START         714
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0xf},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0xe},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC0_END           718
-#define UCM_FUNC1_START         718
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x2f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x2e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC1_END           722
-#define UCM_FUNC2_START         722
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0x1f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0x1e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC2_END           726
-#define UCM_FUNC3_START         726
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x3f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x3e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC3_END           730
-#define UCM_FUNC4_START         730
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0x4f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0x4e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC4_END           734
-#define UCM_FUNC5_START         734
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x6f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x6e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC5_END           738
-#define UCM_FUNC6_START         738
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0x5f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0x5e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC6_END           742
-#define UCM_FUNC7_START         742
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x7f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x7e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC7_END           746
-#define USEM_COMMON_START       746
-	{OP_RD, USEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, USEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, USEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, USEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, USEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, USEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, USEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, USEM_REG_TS_0_AS, 0x0},
-	{OP_WR, USEM_REG_TS_1_AS, 0x1},
-	{OP_WR, USEM_REG_TS_2_AS, 0x4},
-	{OP_WR, USEM_REG_TS_3_AS, 0x0},
-	{OP_WR, USEM_REG_TS_4_AS, 0x1},
-	{OP_WR, USEM_REG_TS_5_AS, 0x3},
-	{OP_WR, USEM_REG_TS_6_AS, 0x0},
-	{OP_WR, USEM_REG_TS_7_AS, 0x1},
-	{OP_WR, USEM_REG_TS_8_AS, 0x4},
-	{OP_WR, USEM_REG_TS_9_AS, 0x0},
-	{OP_WR, USEM_REG_TS_10_AS, 0x1},
-	{OP_WR, USEM_REG_TS_11_AS, 0x3},
-	{OP_WR, USEM_REG_TS_12_AS, 0x0},
-	{OP_WR, USEM_REG_TS_13_AS, 0x1},
-	{OP_WR, USEM_REG_TS_14_AS, 0x4},
-	{OP_WR, USEM_REG_TS_15_AS, 0x0},
-	{OP_WR, USEM_REG_TS_16_AS, 0x4},
-	{OP_WR, USEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, USEM_REG_TS_18_AS, 0x2},
-	{OP_WR, USEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, USEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, USEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, USEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, USEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, USEM_REG_THREADS_LIST, 0xffff},
-	{OP_ZR, USEM_REG_PASSIVE_BUFFER, 0x800},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18000, 0x1a},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18040, 0x4e},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18080, 0x10},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x180c0, 0x20},
-	{OP_WR_ASIC, USEM_REG_FAST_MEMORY + 0x18300, 0x7a120},
-	{OP_WR_EMUL, USEM_REG_FAST_MEMORY + 0x18300, 0x138},
-	{OP_WR_FPGA, USEM_REG_FAST_MEMORY + 0x18300, 0x1388},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_WR_ASIC, USEM_REG_FAST_MEMORY + 0x18380, 0x1dcd6500},
-	{OP_WR_EMUL, USEM_REG_FAST_MEMORY + 0x18380, 0x4c4b4},
-	{OP_WR_FPGA, USEM_REG_FAST_MEMORY + 0x18380, 0x4c4b40},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5000, 0xc2},
-	{OP_WR_EMUL_E1H, USEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2000, 0x102},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4640, 0x40},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x8980, 0xc8},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x57f0, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x8960, 0x2},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x57d8, 0x5},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3228, 0x4},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x57d8 + 0x14, 0x10281},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3200, 0x9},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1c60, 0x20},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x3200 + 0x24, 0x102bb},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x20282},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3180, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x400},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0x8, 0x102bc},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0xc, 0x3},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b68, 0x2},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x6b68 + 0x8, 0x202bd},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b10, 0x2},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x74c0, 0x202bf},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x100284},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c00, 0x1002c1},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x100294},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c40, 0x1002d1},
-	{OP_ZP_E1, USEM_REG_INT_TABLE, 0xc30000},
-	{OP_ZP_E1H, USEM_REG_INT_TABLE, 0xd20000},
-	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x1302a4},
-	{OP_WR_64_E1H, USEM_REG_INT_TABLE + 0x3a8, 0xb02e1},
-	{OP_ZP_E1, USEM_REG_PRAM, 0x314c0000},
-	{OP_ZP_E1H, USEM_REG_PRAM, 0x31b60000},
-	{OP_ZP_E1, USEM_REG_PRAM + 0x8000, 0x35ef0c53},
-	{OP_ZP_E1H, USEM_REG_PRAM + 0x8000, 0x36500c6e},
-	{OP_ZP_E1, USEM_REG_PRAM + 0x10000, 0x361319cf},
-	{OP_ZP_E1H, USEM_REG_PRAM + 0x10000, 0x37591a02},
-	{OP_ZP_E1, USEM_REG_PRAM + 0x18000, 0x7112754},
-	{OP_ZP_E1H, USEM_REG_PRAM + 0x18000, 0x286127d9},
-	{OP_WR_64_E1, USEM_REG_PRAM + 0x18ee0, 0x4e2402a6},
-	{OP_WR_64_E1H, USEM_REG_PRAM + 0x1ff40, 0x401802e3},
-#define USEM_COMMON_END         842
-#define USEM_PORT0_START        842
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1400, 0xa0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9000, 0xa0},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1900, 0x10},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9500, 0x40},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1980, 0x30},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9700, 0x3c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4740, 0xb4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2450, 0xb4},
-	{OP_WR_E1, USEM_REG_FAST_MEMORY + 0x1d90, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2ad0, 0x2},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1b40, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3080, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1b60, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x8000, 0x12c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5318, 0x98},
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x3238, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5100, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5200, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5300, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5400, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5500, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5600, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5700, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5800, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5900, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b78, 0x52},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e08, 0xc},
-#define USEM_PORT0_END          876
-#define USEM_PORT1_START        876
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1680, 0xa0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9280, 0xa0},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1940, 0x10},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9600, 0x40},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1a40, 0x30},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x97f0, 0x3c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4a10, 0xb4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2720, 0xb4},
-	{OP_WR_E1, USEM_REG_FAST_MEMORY + 0x1d94, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2ad8, 0x2},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1b50, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3100, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1be0, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x84b0, 0x12c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5578, 0x98},
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x323c, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5080, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5180, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5280, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5380, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5480, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5580, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5680, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5780, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5880, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5980, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6cc0, 0x52},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e38, 0xc},
-#define USEM_PORT1_END          910
-#define USEM_FUNC0_START        910
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a30, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3000, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4018, 0x2},
-#define USEM_FUNC0_END          913
-#define USEM_FUNC1_START        913
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a34, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3010, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4028, 0x2},
-#define USEM_FUNC1_END          916
-#define USEM_FUNC2_START        916
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a38, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3020, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4038, 0x2},
-#define USEM_FUNC2_END          919
-#define USEM_FUNC3_START        919
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a3c, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3030, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4048, 0x2},
-#define USEM_FUNC3_END          922
-#define USEM_FUNC4_START        922
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a40, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3040, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4058, 0x2},
-#define USEM_FUNC4_END          925
-#define USEM_FUNC5_START        925
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a44, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3050, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4068, 0x2},
-#define USEM_FUNC5_END          928
-#define USEM_FUNC6_START        928
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a48, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3060, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4078, 0x2},
-#define USEM_FUNC6_END          931
-#define USEM_FUNC7_START        931
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a4c, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3070, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4088, 0x2},
-#define USEM_FUNC7_END          934
-#define CSEM_COMMON_START       934
-	{OP_RD, CSEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, CSEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, CSEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, CSEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, CSEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, CSEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, CSEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, CSEM_REG_TS_0_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_1_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_2_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_3_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_4_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_5_AS, 0x3},
-	{OP_WR, CSEM_REG_TS_6_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_7_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_8_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_9_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_10_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_11_AS, 0x3},
-	{OP_WR, CSEM_REG_TS_12_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_13_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_14_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_15_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_16_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, CSEM_REG_TS_18_AS, 0x2},
-	{OP_WR, CSEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, CSEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, CSEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, CSEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, CSEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, CSEM_REG_THREADS_LIST, 0xffff},
-	{OP_ZR, CSEM_REG_PASSIVE_BUFFER, 0x800},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18000, 0x10},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18040, 0x12},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18080, 0x30},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x180c0, 0xe},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x5000, 0x42},
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_WR_EMUL_E1H, CSEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x1000, 0x42},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2000, 0xc0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x7020, 0xc8},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3070, 0x80},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x7000, 0x2},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x4280, 0x4},
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11e8, 0x0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x25c0, 0x240},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3000, 0xc0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a8},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4070, 0x80},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x5280, 0x4},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6700, 0x100},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x9000, 0x400},
-	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x6b08, 0x2002e5},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x13fffff},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002b0},
-	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c00, 0x100305},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002c0},
-	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c40, 0x100315},
-	{OP_ZP_E1, CSEM_REG_INT_TABLE, 0x710000},
-	{OP_ZP_E1H, CSEM_REG_INT_TABLE, 0x740000},
-	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002d0},
-	{OP_WR_64_E1H, CSEM_REG_INT_TABLE + 0x380, 0x100325},
-	{OP_ZP_E1, CSEM_REG_PRAM, 0x32290000},
-	{OP_ZP_E1H, CSEM_REG_PRAM, 0x32260000},
-	{OP_ZP_E1, CSEM_REG_PRAM + 0x8000, 0x23630c8b},
-	{OP_ZP_E1H, CSEM_REG_PRAM + 0x8000, 0x246e0c8a},
-	{OP_WR_64_E1, CSEM_REG_PRAM + 0xc930, 0x654002d2},
-	{OP_WR_64_E1H, CSEM_REG_PRAM + 0xcbb0, 0x64f00327},
-#define CSEM_COMMON_END         1014
-#define CSEM_PORT0_START        1014
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1400, 0xa0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8000, 0xa0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1900, 0x10},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8500, 0x40},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1980, 0x30},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8700, 0x3c},
-	{OP_WR_E1, CSEM_REG_FAST_MEMORY + 0x5118, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4040, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2300, 0xe},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3040, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2410, 0x30},
-#define CSEM_PORT0_END          1025
-#define CSEM_PORT1_START        1025
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1680, 0xa0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8280, 0xa0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1940, 0x10},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8600, 0x40},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1a40, 0x30},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x87f0, 0x3c},
-	{OP_WR_E1, CSEM_REG_FAST_MEMORY + 0x511c, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4058, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2338, 0xe},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3058, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x24d0, 0x30},
-#define CSEM_PORT1_END          1036
-#define CSEM_FUNC0_START        1036
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1148, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3300, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6040, 0x30},
-#define CSEM_FUNC0_END          1039
-#define CSEM_FUNC1_START        1039
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x114c, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3308, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6100, 0x30},
-#define CSEM_FUNC1_END          1042
-#define CSEM_FUNC2_START        1042
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1150, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3310, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x61c0, 0x30},
-#define CSEM_FUNC2_END          1045
-#define CSEM_FUNC3_START        1045
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1154, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3318, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6280, 0x30},
-#define CSEM_FUNC3_END          1048
-#define CSEM_FUNC4_START        1048
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1158, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3320, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6340, 0x30},
-#define CSEM_FUNC4_END          1051
-#define CSEM_FUNC5_START        1051
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x115c, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3328, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6400, 0x30},
-#define CSEM_FUNC5_END          1054
-#define CSEM_FUNC6_START        1054
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1160, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3330, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x64c0, 0x30},
-#define CSEM_FUNC6_END          1057
-#define CSEM_FUNC7_START        1057
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1164, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3338, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6580, 0x30},
-#define CSEM_FUNC7_END          1060
-#define XPB_COMMON_START        1060
-	{OP_WR, GRCBASE_XPB + PB_REG_CONTROL, 0x20},
-#define XPB_COMMON_END          1061
-#define DQ_COMMON_START         1061
-	{OP_WR, DORQ_REG_MODE_ACT, 0x2},
-	{OP_WR, DORQ_REG_NORM_CID_OFST, 0x3},
-	{OP_WR, DORQ_REG_OUTST_REQ, 0x4},
-	{OP_WR, DORQ_REG_DPM_CID_ADDR, 0x8},
-	{OP_WR, DORQ_REG_RSP_INIT_CRD, 0x2},
-	{OP_WR, DORQ_REG_NORM_CMHEAD_TX, 0x90},
-	{OP_WR, DORQ_REG_CMHEAD_RX, 0x90},
-	{OP_WR, DORQ_REG_SHRT_CMHEAD, 0x800090},
-	{OP_WR, DORQ_REG_ERR_CMHEAD, 0x8140000},
-	{OP_WR, DORQ_REG_AGG_CMD0, 0x8a},
-	{OP_WR, DORQ_REG_AGG_CMD1, 0x80},
-	{OP_WR, DORQ_REG_AGG_CMD2, 0x90},
-	{OP_WR, DORQ_REG_AGG_CMD3, 0x80},
-	{OP_WR, DORQ_REG_SHRT_ACT_CNT, 0x6},
-	{OP_WR, DORQ_REG_DQ_FIFO_FULL_TH, 0x7d0},
-	{OP_WR, DORQ_REG_DQ_FIFO_AFULL_TH, 0x76c},
-	{OP_WR, DORQ_REG_REGN, 0x7c1004},
-	{OP_WR, DORQ_REG_IF_EN, 0xf},
-#define DQ_COMMON_END           1079
-#define TIMERS_COMMON_START     1079
-	{OP_ZR, TM_REG_CLIN_PRIOR0_CLIENT, 0x2},
-	{OP_WR, TM_REG_LIN_SETCLR_FIFO_ALFULL_THR, 0x1c},
-	{OP_WR, TM_REG_CFC_AC_CRDCNT_VAL, 0x1},
-	{OP_WR, TM_REG_CFC_CLD_CRDCNT_VAL, 0x1},
-	{OP_WR, TM_REG_CLOUT_CRDCNT0_VAL, 0x1},
-	{OP_WR, TM_REG_CLOUT_CRDCNT1_VAL, 0x1},
-	{OP_WR, TM_REG_CLOUT_CRDCNT2_VAL, 0x1},
-	{OP_WR, TM_REG_EXP_CRDCNT_VAL, 0x1},
-	{OP_WR_E1, TM_REG_PCIARB_CRDCNT_VAL, 0x1},
-	{OP_WR_E1H, TM_REG_PCIARB_CRDCNT_VAL, 0x2},
-	{OP_WR_ASIC, TM_REG_TIMER_TICK_SIZE, 0x3d090},
-	{OP_WR_EMUL, TM_REG_TIMER_TICK_SIZE, 0x9c},
-	{OP_WR_FPGA, TM_REG_TIMER_TICK_SIZE, 0x9c4},
-	{OP_WR, TM_REG_CL0_CONT_REGION, 0x8},
-	{OP_WR, TM_REG_CL1_CONT_REGION, 0xc},
-	{OP_WR, TM_REG_CL2_CONT_REGION, 0x10},
-	{OP_WR, TM_REG_TM_CONTEXT_REGION, 0x20},
-	{OP_WR, TM_REG_EN_TIMERS, 0x1},
-	{OP_WR, TM_REG_EN_REAL_TIME_CNT, 0x1},
-	{OP_WR, TM_REG_EN_CL0_INPUT, 0x1},
-	{OP_WR, TM_REG_EN_CL1_INPUT, 0x1},
-	{OP_WR, TM_REG_EN_CL2_INPUT, 0x1},
-#define TIMERS_COMMON_END       1101
-#define TIMERS_PORT0_START      1101
-	{OP_WR, TM_REG_LIN0_LOGIC_ADDR, 0x0},
-	{OP_WR, TM_REG_LIN0_PHY_ADDR_VALID, 0x0},
-	{OP_ZR, TM_REG_LIN0_PHY_ADDR, 0x2},
-#define TIMERS_PORT0_END        1104
-#define TIMERS_PORT1_START      1104
-	{OP_WR, TM_REG_LIN1_LOGIC_ADDR, 0x0},
-	{OP_WR, TM_REG_LIN1_PHY_ADDR_VALID, 0x0},
-	{OP_ZR, TM_REG_LIN1_PHY_ADDR, 0x2},
-#define TIMERS_PORT1_END        1107
-#define XSDM_COMMON_START       1107
-	{OP_WR_E1, XSDM_REG_CFC_RSP_START_ADDR, 0x614},
-	{OP_WR_E1H, XSDM_REG_CFC_RSP_START_ADDR, 0x424},
-	{OP_WR_E1, XSDM_REG_CMP_COUNTER_START_ADDR, 0x600},
-	{OP_WR_E1H, XSDM_REG_CMP_COUNTER_START_ADDR, 0x410},
-	{OP_WR_E1, XSDM_REG_Q_COUNTER_START_ADDR, 0x604},
-	{OP_WR_E1H, XSDM_REG_Q_COUNTER_START_ADDR, 0x414},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_0, 0x20},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_1, 0x20},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_4, 0x23},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_5, 0x24},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_6, 0x25},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_7, 0x26},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_8, 0x27},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_9, 0x29},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_10, 0x2a},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_11, 0x2b},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_12, 0x2c},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_13, 0x2d},
-	{OP_ZR, XSDM_REG_AGG_INT_EVENT_14, 0x52},
-	{OP_WR, XSDM_REG_AGG_INT_MODE_0, 0x1},
-	{OP_ZR, XSDM_REG_AGG_INT_MODE_1, 0x1f},
-	{OP_WR, XSDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, XSDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, XSDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, XSDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, XSDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, XSDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, XSDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, XSDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, XSDM_REG_TIMER_TICK, 0xa},
-#define XSDM_COMMON_END         1156
-#define QM_COMMON_START         1156
-	{OP_WR, QM_REG_ACTCTRINITVAL_0, 0x6},
-	{OP_WR, QM_REG_ACTCTRINITVAL_1, 0x5},
-	{OP_WR, QM_REG_ACTCTRINITVAL_2, 0xa},
-	{OP_WR, QM_REG_ACTCTRINITVAL_3, 0x5},
-	{OP_WR, QM_REG_PCIREQAT, 0x2},
-	{OP_WR, QM_REG_CMINITCRD_0, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_1, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_2, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_3, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_4, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_5, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_6, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_7, 0x4},
-	{OP_WR, QM_REG_OUTLDREQ, 0x4},
-	{OP_WR, QM_REG_CTXREG_0, 0x7c},
-	{OP_WR, QM_REG_CTXREG_1, 0x3d},
-	{OP_WR, QM_REG_CTXREG_2, 0x3f},
-	{OP_WR, QM_REG_CTXREG_3, 0x9c},
-	{OP_WR, QM_REG_ENSEC, 0x7},
-	{OP_ZR, QM_REG_QVOQIDX_0, 0x5},
-	{OP_WR, QM_REG_WRRWEIGHTS_0, 0x1010101},
-	{OP_WR, QM_REG_QVOQIDX_5, 0x0},
-	{OP_WR, QM_REG_QVOQIDX_6, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_7, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_8, 0x2},
-	{OP_WR, QM_REG_WRRWEIGHTS_1, 0x8012004},
-	{OP_WR, QM_REG_QVOQIDX_9, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_10, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_11, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_12, 0x5},
-	{OP_WR, QM_REG_WRRWEIGHTS_2, 0x20081001},
-	{OP_WR, QM_REG_QVOQIDX_13, 0x8},
-	{OP_WR, QM_REG_QVOQIDX_14, 0x6},
-	{OP_WR, QM_REG_QVOQIDX_15, 0x7},
-	{OP_WR, QM_REG_QVOQIDX_16, 0x0},
-	{OP_WR, QM_REG_WRRWEIGHTS_3, 0x1010120},
-	{OP_ZR, QM_REG_QVOQIDX_17, 0x4},
-	{OP_WR, QM_REG_WRRWEIGHTS_4, 0x1010101},
-	{OP_ZR_E1, QM_REG_QVOQIDX_21, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_21, 0x0},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_5, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_22, 0x4},
-	{OP_ZR_E1, QM_REG_QVOQIDX_25, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_23, 0x4},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_6, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_24, 0x2},
-	{OP_ZR_E1, QM_REG_QVOQIDX_29, 0x3},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_5, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_25, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_26, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_27, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_28, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_6, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_29, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_30, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_31, 0x7},
-	{OP_WR, QM_REG_QVOQIDX_32, 0x1},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_7, 0x1010101},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_7, 0x1010120},
-	{OP_WR, QM_REG_QVOQIDX_33, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_34, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_35, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_36, 0x1},
-	{OP_WR, QM_REG_WRRWEIGHTS_8, 0x1010101},
-	{OP_WR, QM_REG_QVOQIDX_37, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_38, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_39, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_40, 0x2},
-	{OP_WR, QM_REG_WRRWEIGHTS_9, 0x8012004},
-	{OP_WR, QM_REG_QVOQIDX_41, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_42, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_43, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_44, 0x5},
-	{OP_WR, QM_REG_WRRWEIGHTS_10, 0x20081001},
-	{OP_WR, QM_REG_QVOQIDX_45, 0x8},
-	{OP_WR, QM_REG_QVOQIDX_46, 0x6},
-	{OP_WR, QM_REG_QVOQIDX_47, 0x7},
-	{OP_WR, QM_REG_QVOQIDX_48, 0x1},
-	{OP_WR, QM_REG_WRRWEIGHTS_11, 0x1010120},
-	{OP_WR, QM_REG_QVOQIDX_49, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_50, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_51, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_52, 0x1},
-	{OP_WR, QM_REG_WRRWEIGHTS_12, 0x1010101},
-	{OP_WR, QM_REG_QVOQIDX_53, 0x1},
-	{OP_WR_E1, QM_REG_QVOQIDX_54, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_54, 0x4},
-	{OP_WR_E1, QM_REG_QVOQIDX_55, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_55, 0x4},
-	{OP_WR_E1, QM_REG_QVOQIDX_56, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_56, 0x2},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_13, 0x1010101},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_13, 0x8012004},
-	{OP_WR_E1, QM_REG_QVOQIDX_57, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_57, 0x5},
-	{OP_WR_E1, QM_REG_QVOQIDX_58, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_58, 0x5},
-	{OP_WR_E1, QM_REG_QVOQIDX_59, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_59, 0x5},
-	{OP_WR_E1, QM_REG_QVOQIDX_60, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_60, 0x5},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_14, 0x1010101},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_14, 0x20081001},
-	{OP_WR_E1, QM_REG_QVOQIDX_61, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_61, 0x8},
-	{OP_WR_E1, QM_REG_QVOQIDX_62, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_62, 0x6},
-	{OP_WR_E1, QM_REG_QVOQIDX_63, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_63, 0x7},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_15, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_64, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_0_LSB, 0xffff003f},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_15, 0x1010120},
-	{OP_ZR_E1, QM_REG_VOQQMASK_0_MSB, 0x2},
-	{OP_ZR_E1H, QM_REG_QVOQIDX_65, 0x4},
-	{OP_WR_E1, QM_REG_VOQQMASK_1_MSB, 0xffff003f},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_16, 0x1010101},
-	{OP_WR_E1, QM_REG_VOQQMASK_2_LSB, 0x100},
-	{OP_WR_E1H, QM_REG_QVOQIDX_69, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_2_MSB, 0x100},
-	{OP_WR_E1H, QM_REG_QVOQIDX_70, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_71, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_72, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_17, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_73, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_74, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_75, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_76, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_18, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_77, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_78, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_79, 0x7},
-	{OP_WR_E1H, QM_REG_QVOQIDX_80, 0x0},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_19, 0x1010120},
-	{OP_ZR_E1H, QM_REG_QVOQIDX_81, 0x4},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_20, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_85, 0x0},
-	{OP_WR_E1H, QM_REG_QVOQIDX_86, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_87, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_88, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_21, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_89, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_90, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_91, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_92, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_22, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_93, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_94, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_95, 0x7},
-	{OP_WR_E1H, QM_REG_QVOQIDX_96, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_23, 0x1010120},
-	{OP_WR_E1H, QM_REG_QVOQIDX_97, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_98, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_99, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_100, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_24, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_101, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_102, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_103, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_104, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_25, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_105, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_106, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_107, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_108, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_26, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_109, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_110, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_111, 0x7},
-	{OP_WR_E1H, QM_REG_QVOQIDX_112, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_27, 0x1010120},
-	{OP_WR_E1H, QM_REG_QVOQIDX_113, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_114, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_115, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_116, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_28, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_117, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_118, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_119, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_120, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_29, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_121, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_122, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_123, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_124, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_30, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_125, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_126, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_127, 0x7},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_31, 0x1010120},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_LSB, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_MSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_LSB_EXT_A, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_MSB, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_MSB_EXT_A, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_LSB, 0x1000100},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_MSB, 0x1000100},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_LSB_EXT_A, 0x1000100},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_MSB_EXT_A, 0x1000100},
-	{OP_ZR, QM_REG_VOQQMASK_3_LSB, 0x2},
-	{OP_WR_E1, QM_REG_VOQQMASK_4_LSB, 0xc0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_3_LSB_EXT_A, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_4_MSB, 0xc0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_3_MSB_EXT_A, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_5_LSB, 0x1e00},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_LSB, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_5_MSB, 0x1e00},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_MSB, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_6_LSB, 0x4000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_LSB_EXT_A, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_6_MSB, 0x4000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_MSB_EXT_A, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_7_LSB, 0x8000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_LSB, 0x1e001e00},
-	{OP_WR_E1, QM_REG_VOQQMASK_7_MSB, 0x8000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_MSB, 0x1e001e00},
-	{OP_WR_E1, QM_REG_VOQQMASK_8_LSB, 0x2000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_LSB_EXT_A, 0x1e001e00},
-	{OP_WR_E1, QM_REG_VOQQMASK_8_MSB, 0x2000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_MSB_EXT_A, 0x1e001e00},
-	{OP_ZR_E1, QM_REG_VOQQMASK_9_LSB, 0x7},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_LSB, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_MSB, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_LSB_EXT_A, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_MSB_EXT_A, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_LSB, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_MSB, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_LSB_EXT_A, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_MSB_EXT_A, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_LSB, 0x20002000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_MSB, 0x20002000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_LSB_EXT_A, 0x20002000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_MSB_EXT_A, 0x20002000},
-	{OP_ZR_E1H, QM_REG_VOQQMASK_9_LSB, 0x2},
-	{OP_WR_E1H, QM_REG_VOQQMASK_9_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_9_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_MSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_MSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQPORT_0, 0x0},
-	{OP_WR, QM_REG_VOQPORT_1, 0x1},
-	{OP_ZR, QM_REG_VOQPORT_2, 0xa},
-	{OP_WR, QM_REG_CMINTVOQMASK_0, 0xc08},
-	{OP_WR, QM_REG_CMINTVOQMASK_1, 0x40},
-	{OP_WR, QM_REG_CMINTVOQMASK_2, 0x100},
-	{OP_WR, QM_REG_CMINTVOQMASK_3, 0x20},
-	{OP_WR, QM_REG_CMINTVOQMASK_4, 0x17},
-	{OP_WR, QM_REG_CMINTVOQMASK_5, 0x80},
-	{OP_WR, QM_REG_CMINTVOQMASK_6, 0x200},
-	{OP_WR, QM_REG_CMINTVOQMASK_7, 0x0},
-	{OP_WR_E1, QM_REG_HWAEMPTYMASK_LSB, 0xffff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_LSB, 0x1ff01ff},
-	{OP_WR_E1, QM_REG_HWAEMPTYMASK_MSB, 0xffff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_MSB, 0x1ff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_LSB_EXT_A, 0x1ff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_MSB_EXT_A, 0x1ff01ff},
-	{OP_WR, QM_REG_ENBYPVOQMASK, 0x13},
-	{OP_WR, QM_REG_VOQCREDITAFULLTHR, 0x13f},
-	{OP_WR, QM_REG_VOQINITCREDIT_0, 0x140},
-	{OP_WR, QM_REG_VOQINITCREDIT_1, 0x140},
-	{OP_ZR, QM_REG_VOQINITCREDIT_2, 0x2},
-	{OP_WR, QM_REG_VOQINITCREDIT_4, 0xc0},
-	{OP_ZR, QM_REG_VOQINITCREDIT_5, 0x7},
-	{OP_WR, QM_REG_TASKCRDCOST_0, 0x48},
-	{OP_WR, QM_REG_TASKCRDCOST_1, 0x48},
-	{OP_ZR, QM_REG_TASKCRDCOST_2, 0x2},
-	{OP_WR, QM_REG_TASKCRDCOST_4, 0x48},
-	{OP_ZR, QM_REG_TASKCRDCOST_5, 0x7},
-	{OP_WR, QM_REG_BYTECRDINITVAL, 0x8000},
-	{OP_WR, QM_REG_BYTECRDCOST, 0x25e4},
-	{OP_WR, QM_REG_BYTECREDITAFULLTHR, 0x7fff},
-	{OP_WR_E1, QM_REG_ENBYTECRD_LSB, 0x7},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_LSB, 0x70007},
-	{OP_WR_E1, QM_REG_ENBYTECRD_MSB, 0x7},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_MSB, 0x70007},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_LSB_EXT_A, 0x70007},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_MSB_EXT_A, 0x70007},
-	{OP_WR, QM_REG_BYTECRDPORT_LSB, 0x0},
-	{OP_WR, QM_REG_BYTECRDPORT_MSB, 0xffffffff},
-	{OP_WR_E1, QM_REG_FUNCNUMSEL_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_BYTECRDPORT_LSB_EXT_A, 0x0},
-	{OP_WR_E1, QM_REG_FUNCNUMSEL_MSB, 0xffffffff},
-	{OP_WR_E1H, QM_REG_BYTECRDPORT_MSB_EXT_A, 0xffffffff},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_0, 0x0},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_1, 0x2},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_2, 0x1},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_3, 0x3},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_4, 0x4},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_5, 0x6},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_6, 0x5},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_7, 0x7},
-	{OP_WR, QM_REG_CMINTEN, 0xff},
-#define QM_COMMON_END           1456
-#define PBF_COMMON_START        1456
-	{OP_WR, PBF_REG_INIT, 0x1},
-	{OP_WR, PBF_REG_INIT_P4, 0x1},
-	{OP_WR, PBF_REG_MAC_LB_ENABLE, 0x1},
-	{OP_WR, PBF_REG_IF_ENABLE_REG, 0x7fff},
-	{OP_WR, PBF_REG_INIT_P4, 0x0},
-	{OP_WR, PBF_REG_INIT, 0x0},
-	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P4, 0x0},
-#define PBF_COMMON_END          1463
-#define PBF_PORT0_START         1463
-	{OP_WR, PBF_REG_INIT_P0, 0x1},
-	{OP_WR, PBF_REG_MAC_IF0_ENABLE, 0x1},
-	{OP_WR, PBF_REG_INIT_P0, 0x0},
-	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P0, 0x0},
-#define PBF_PORT0_END           1467
-#define PBF_PORT1_START         1467
-	{OP_WR, PBF_REG_INIT_P1, 0x1},
-	{OP_WR, PBF_REG_MAC_IF1_ENABLE, 0x1},
-	{OP_WR, PBF_REG_INIT_P1, 0x0},
-	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P1, 0x0},
-#define PBF_PORT1_END           1471
-#define XCM_COMMON_START        1471
-	{OP_WR, XCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, XCM_REG_XQM_XCM_HDR_P, 0x3150020},
-	{OP_WR, XCM_REG_XQM_XCM_HDR_S, 0x3150020},
-	{OP_WR, XCM_REG_TM_XCM_HDR, 0x1000030},
-	{OP_WR, XCM_REG_ERR_XCM_HDR, 0x8100000},
-	{OP_WR, XCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, XCM_REG_EXPR_EVNT_ID, 0x30},
-	{OP_WR, XCM_REG_STOP_EVNT_ID, 0x31},
-	{OP_WR, XCM_REG_STORM_WEIGHT, 0x3},
-	{OP_WR, XCM_REG_TSEM_WEIGHT, 0x6},
-	{OP_WR, XCM_REG_CSEM_WEIGHT, 0x3},
-	{OP_WR, XCM_REG_USEM_WEIGHT, 0x3},
-	{OP_WR, XCM_REG_DORQ_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_PBF_WEIGHT, 0x0},
-	{OP_WR, XCM_REG_NIG0_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_CP_WEIGHT, 0x0},
-	{OP_WR, XCM_REG_XSDM_WEIGHT, 0x6},
-	{OP_WR, XCM_REG_XQM_P_WEIGHT, 0x4},
-	{OP_WR, XCM_REG_XQM_S_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_TM_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_XCM_XQM_USE_Q, 0x1},
-	{OP_WR, XCM_REG_XQM_BYP_ACT_UPD, 0x6},
-	{OP_WR, XCM_REG_UNA_GT_NXT_Q, 0x0},
-	{OP_WR, XCM_REG_AUX1_Q, 0x2},
-	{OP_WR, XCM_REG_AUX_CNT_FLG_Q_19, 0x1},
-	{OP_WR, XCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, XCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, XCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, XCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, XCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, XCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, XCM_REG_TM_INIT_CRD, 0x4},
-	{OP_WR, XCM_REG_XQM_INIT_CRD, 0x20},
-	{OP_WR, XCM_REG_XX_INIT_CRD, 0x2},
-	{OP_WR_E1, XCM_REG_XX_MSG_NUM, 0x1f},
-	{OP_WR_E1H, XCM_REG_XX_MSG_NUM, 0x20},
-	{OP_ZR, XCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02d4},
-	{OP_SW_E1H, XCM_REG_XX_DESCR_TABLE, 0x1f0329},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_0, 0xf},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_1, 0x7},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_2, 0xb},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_3, 0xe},
-	{OP_ZR_E1, XCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR_E1H, XCM_REG_N_SM_CTX_LD_4, 0xe},
-	{OP_ZR_E1H, XCM_REG_N_SM_CTX_LD_5, 0x3},
-	{OP_WR, XCM_REG_XCM_REG0_SZ, 0x4},
-	{OP_WR, XCM_REG_XCM_STORM0_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_STORM1_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_XQM_IFEN, 0x1},
-	{OP_WR, XCM_REG_STORM_XCM_IFEN, 0x1},
-	{OP_WR, XCM_REG_XQM_XCM_IFEN, 0x1},
-	{OP_WR, XCM_REG_XSDM_IFEN, 0x1},
-	{OP_WR, XCM_REG_TM_XCM_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_TM_IFEN, 0x1},
-	{OP_WR, XCM_REG_TSEM_IFEN, 0x1},
-	{OP_WR, XCM_REG_CSEM_IFEN, 0x1},
-	{OP_WR, XCM_REG_USEM_IFEN, 0x1},
-	{OP_WR, XCM_REG_DORQ_IFEN, 0x1},
-	{OP_WR, XCM_REG_PBF_IFEN, 0x1},
-	{OP_WR, XCM_REG_NIG0_IFEN, 0x1},
-	{OP_WR, XCM_REG_NIG1_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_CFC_IFEN, 0x1},
-#define XCM_COMMON_END          1538
-#define XCM_PORT0_START         1538
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-#define XCM_PORT0_END           1546
-#define XCM_PORT1_START         1546
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-#define XCM_PORT1_END           1554
-#define XCM_FUNC0_START         1554
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC0_END           1563
-#define XCM_FUNC1_START         1563
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC1_END           1572
-#define XCM_FUNC2_START         1572
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC2_END           1581
-#define XCM_FUNC3_START         1581
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC3_END           1590
-#define XCM_FUNC4_START         1590
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC4_END           1599
-#define XCM_FUNC5_START         1599
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC5_END           1608
-#define XCM_FUNC6_START         1608
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC6_END           1617
-#define XCM_FUNC7_START         1617
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC7_END           1626
-#define XSEM_COMMON_START       1626
-	{OP_RD, XSEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, XSEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, XSEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, XSEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, XSEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, XSEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, XSEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, XSEM_REG_TS_0_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_1_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_2_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_3_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_4_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_5_AS, 0x3},
-	{OP_WR, XSEM_REG_TS_6_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_7_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_8_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_9_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_10_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_11_AS, 0x3},
-	{OP_WR, XSEM_REG_TS_12_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_13_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_14_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_15_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_16_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, XSEM_REG_TS_18_AS, 0x2},
-	{OP_WR, XSEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, XSEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, XSEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, XSEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, XSEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, XSEM_REG_THREADS_LIST, 0xffff},
-	{OP_ZR, XSEM_REG_PASSIVE_BUFFER, 0x800},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18000, 0x0},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18040, 0x18},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18080, 0xc},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x180c0, 0x66},
-	{OP_WR_ASIC, XSEM_REG_FAST_MEMORY + 0x18300, 0x7a120},
-	{OP_WR_EMUL, XSEM_REG_FAST_MEMORY + 0x18300, 0x138},
-	{OP_WR_FPGA, XSEM_REG_FAST_MEMORY + 0x18300, 0x1388},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_WR_ASIC, XSEM_REG_FAST_MEMORY + 0x18340, 0x1f4},
-	{OP_WR_EMUL, XSEM_REG_FAST_MEMORY + 0x18340, 0x0},
-	{OP_WR_FPGA, XSEM_REG_FAST_MEMORY + 0x18340, 0x5},
-	{OP_WR_EMUL, XSEM_REG_FAST_MEMORY + 0x18380, 0x4c4b4},
-	{OP_WR_ASIC, XSEM_REG_FAST_MEMORY + 0x18380, 0x1dcd6500},
-	{OP_WR_EMUL_E1H, XSEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_WR_FPGA, XSEM_REG_FAST_MEMORY + 0x18380, 0x4c4b40},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3d60, 0x4},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d60 + 0x10, 0x202f3},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x29c8, 0x4},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3000, 0x48},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29c8 + 0x10, 0x20348},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2080, 0x48},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9020, 0xc8},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3128, 0x8e},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9000, 0x2},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3368, 0x0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x21a8, 0x86},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202f5},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2000, 0x20},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402f7},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x23c8, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3e20, 0x202fb},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x23d0, 0x2034a},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1518, 0x1},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2498, 0x4034c},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1830, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2c20, 0x0},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1838, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2c10, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202fd},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2c08, 0x20350},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4ac0, 0x2},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3010, 0x1},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b00, 0x4},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x4040, 0x10},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f48, 0x202ff},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x4000, 0x100352},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6ac0, 0x2},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b00, 0x4},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x8408, 0x20362},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100301},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100364},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80311},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80374},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x2000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x80319},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8037c},
-	{OP_ZP_E1, XSEM_REG_INT_TABLE, 0xb50000},
-	{OP_ZP_E1H, XSEM_REG_INT_TABLE, 0xbd0000},
-	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130321},
-	{OP_WR_64_E1H, XSEM_REG_INT_TABLE + 0x3a8, 0xb0384},
-	{OP_ZP_E1, XSEM_REG_PRAM, 0x33660000},
-	{OP_ZP_E1H, XSEM_REG_PRAM, 0x34060000},
-	{OP_ZP_E1, XSEM_REG_PRAM + 0x8000, 0x38b30cda},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x8000, 0x37960d02},
-	{OP_ZP_E1, XSEM_REG_PRAM + 0x10000, 0x3bb11b07},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x10000, 0x3bc31ae8},
-	{OP_ZP_E1, XSEM_REG_PRAM + 0x18000, 0x2a2629f4},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x18000, 0x382629d9},
-	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1d6c0, 0x45280323},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x20000, 0x124537e3},
-	{OP_WR_64_E1H, XSEM_REG_PRAM + 0x22220, 0x3bbc0386},
-#define XSEM_COMMON_END         1741
-#define XSEM_PORT0_START        1741
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3ba0, 0x14},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc000, 0xfc},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c40, 0x24},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x24a8, 0x14},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1400, 0xa},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2548, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1450, 0x6},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2668, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3378, 0xfc},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2788, 0x24},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b58, 0x0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x28a8, 0x24},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d78, 0x20325},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa000, 0x28},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d88, 0x100327},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa140, 0xc},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1500, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29e0, 0x20388},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1508, 0x1},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3000, 0x1},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5020, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5030, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5000, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5010, 0x2},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x5040, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x5208, 0x1},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ac8, 0x2038a},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50b8, 0x1},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b10, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x20337},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d20, 0x4},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b10, 0x42},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d20, 0x4},
-#define XSEM_PORT0_END          1775
-#define XSEM_PORT1_START        1775
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3bf0, 0x14},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc3f0, 0xfc},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3cd0, 0x24},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x24f8, 0x14},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1428, 0xa},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x25d8, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1468, 0x6},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x26f8, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3768, 0xfc},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2818, 0x24},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b5c, 0x0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2938, 0x24},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d80, 0x20339},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa0a0, 0x28},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3dc8, 0x10033b},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa170, 0xc},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1504, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29e8, 0x2038c},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x150c, 0x1},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3004, 0x1},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5028, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5038, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5008, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5018, 0x2},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x5044, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x520c, 0x1},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ad0, 0x2038e},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50bc, 0x1},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6c18, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2034b},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d30, 0x4},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4c18, 0x42},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d30, 0x4},
-#define XSEM_PORT1_END          1809
-#define XSEM_FUNC0_START        1809
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e0, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29f0, 0x100390},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-#define XSEM_FUNC0_END          1812
-#define XSEM_FUNC1_START        1812
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e4, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a30, 0x1003a0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-#define XSEM_FUNC1_END          1815
-#define XSEM_FUNC2_START        1815
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e8, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a70, 0x1003b0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50b8, 0xe},
-#define XSEM_FUNC2_END          1818
-#define XSEM_FUNC3_START        1818
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7ec, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2ab0, 0x1003c0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50f0, 0xe},
-#define XSEM_FUNC3_END          1821
-#define XSEM_FUNC4_START        1821
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f0, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2af0, 0x1003d0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5128, 0xe},
-#define XSEM_FUNC4_END          1824
-#define XSEM_FUNC5_START        1824
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f4, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2b30, 0x1003e0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5160, 0xe},
-#define XSEM_FUNC5_END          1827
-#define XSEM_FUNC6_START        1827
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f8, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2b70, 0x1003f0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5198, 0xe},
-#define XSEM_FUNC6_END          1830
-#define XSEM_FUNC7_START        1830
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7fc, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2bb0, 0x100400},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x51d0, 0xe},
-#define XSEM_FUNC7_END          1833
-#define CDU_COMMON_START        1833
-	{OP_WR, CDU_REG_CDU_CONTROL0, 0x1},
-	{OP_WR_E1H, CDU_REG_MF_MODE, 0x1},
-	{OP_WR, CDU_REG_CDU_CHK_MASK0, 0x3d000},
-	{OP_WR, CDU_REG_CDU_CHK_MASK1, 0x3d},
-	{OP_WB_E1, CDU_REG_L1TT, 0x200034d},
-	{OP_WB_E1H, CDU_REG_L1TT, 0x2000410},
-	{OP_WB_E1, CDU_REG_MATT, 0x20054d},
-	{OP_WB_E1H, CDU_REG_MATT, 0x280610},
-	{OP_ZR_E1, CDU_REG_MATT + 0x80, 0x2},
-	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6056d},
-	{OP_ZR, CDU_REG_MATT + 0xa0, 0x18},
-#define CDU_COMMON_END          1844
-#define DMAE_COMMON_START       1844
-	{OP_ZR, DMAE_REG_CMD_MEM, 0xe0},
-	{OP_WR, DMAE_REG_CRC16C_INIT, 0x0},
-	{OP_WR, DMAE_REG_CRC16T10_INIT, 0x1},
-	{OP_WR_E1, DMAE_REG_PXP_REQ_INIT_CRD, 0x1},
-	{OP_WR_E1H, DMAE_REG_PXP_REQ_INIT_CRD, 0x2},
-	{OP_WR, DMAE_REG_PCI_IFEN, 0x1},
-	{OP_WR, DMAE_REG_GRC_IFEN, 0x1},
-#define DMAE_COMMON_END         1851
-#define PXP_COMMON_START        1851
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50573},
-	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x400, 0x50638},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x50578},
-	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT, 0x5063d},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5057d},
-	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x20, 0x50642},
-#define PXP_COMMON_END          1857
-#define CFC_COMMON_START        1857
-	{OP_ZR_E1H, CFC_REG_LINK_LIST, 0x100},
-	{OP_WR, CFC_REG_CONTROL0, 0x10},
-	{OP_WR, CFC_REG_DISABLE_ON_ERROR, 0x3fff},
-	{OP_WR, CFC_REG_INTERFACES, 0x280000},
-	{OP_WR, CFC_REG_LCREQ_WEIGHTS, 0x84924a},
-	{OP_WR, CFC_REG_INTERFACES, 0x0},
-#define CFC_COMMON_END          1863
-#define HC_COMMON_START         1863
-	{OP_ZR_E1, HC_REG_USTORM_ADDR_FOR_COALESCE, 0x4},
-#define HC_COMMON_END           1864
-#define HC_PORT0_START          1864
-	{OP_WR_E1, HC_REG_CONFIG_0, 0x1080},
-	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_0, 0x2},
-	{OP_WR_E1, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1, HC_REG_LEADING_EDGE_0, 0xffff},
-	{OP_WR_E1, HC_REG_TRAILING_EDGE_0, 0xffff},
-	{OP_WR_E1, HC_REG_AGG_INT_0, 0x0},
-	{OP_WR_E1, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_PORT0_END            1882
-#define HC_PORT1_START          1882
-	{OP_WR_E1, HC_REG_CONFIG_1, 0x1080},
-	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_1, 0x2},
-	{OP_WR_E1, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1, HC_REG_LEADING_EDGE_1, 0xffff},
-	{OP_WR_E1, HC_REG_TRAILING_EDGE_1, 0xffff},
-	{OP_WR_E1, HC_REG_AGG_INT_1, 0x0},
-	{OP_WR_E1, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_PORT1_END            1900
-#define HC_FUNC0_START          1900
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x0},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC0_END            1915
-#define HC_FUNC1_START          1915
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x1},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC1_END            1930
-#define HC_FUNC2_START          1930
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x2},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC2_END            1945
-#define HC_FUNC3_START          1945
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x3},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC3_END            1960
-#define HC_FUNC4_START          1960
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x4},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC4_END            1975
-#define HC_FUNC5_START          1975
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x5},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC5_END            1990
-#define HC_FUNC6_START          1990
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x6},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC6_END            2005
-#define HC_FUNC7_START          2005
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x7},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC7_END            2020
-#define PXP2_COMMON_START       2020
-	{OP_WR_E1H, PXP2_REG_RQ_DRAM_ALIGN, 0x1},
-	{OP_WR, PXP2_REG_PGL_CONTROL0, 0xe38340},
-	{OP_WR, PXP2_REG_PGL_CONTROL1, 0x3c10},
-	{OP_WR_E1H, PXP2_REG_RQ_ELT_DISABLE, 0x1},
-	{OP_WR_E1H, PXP2_REG_WR_REV_MODE, 0x0},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_0, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_7, 0xffffffff},
-	{OP_WR_E1, PXP2_REG_PGL_INT_USDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_7, 0xffffffff},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_XSDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_7, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_0, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_7, 0xffffffff},
-	{OP_WR_E1, PXP2_REG_PGL_INT_XSDM_0, 0xffff3330},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_XSDM_0, 0xff802000},
-	{OP_WR_E1, PXP2_REG_PGL_INT_XSDM_1, 0xffff3340},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_USDM_0, 0xf0005000},
-	{OP_WR_E1, PXP2_REG_PGL_INT_USDM_0, 0xf0003000},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_USDM_1, 0xf0008000},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ6, 0x8},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ9, 0x8},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ10, 0x8},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ11, 0x2},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ17, 0x4},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ18, 0x5},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ19, 0x4},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ22, 0x0},
-	{OP_WR, PXP2_REG_RD_START_INIT, 0x1},
-	{OP_WR, PXP2_REG_WR_DMAE_TH, 0x3f},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD0, 0x40},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD1, 0x1808},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD2, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD3, 0x803},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD4, 0x40},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD5, 0x3},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD6, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD7, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD8, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD9, 0x10003},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD10, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD11, 0x803},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD12, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD13, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD14, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD15, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD16, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD17, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD18, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD19, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD20, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD22, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD23, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD24, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD25, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD26, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD27, 0x3},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD28, 0x2403},
-	{OP_WR, PXP2_REG_RQ_BW_WR_ADD29, 0x2f},
-	{OP_WR, PXP2_REG_RQ_BW_WR_ADD30, 0x9},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND0, 0x19},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB1, 0x184},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB2, 0x183},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB3, 0x306},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND4, 0x19},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND5, 0x6},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB6, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB7, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB8, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB9, 0xc86},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB10, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB11, 0x306},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND12, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND13, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND14, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND15, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND16, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND17, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND18, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND19, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND20, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND22, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND23, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND24, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND25, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND26, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND27, 0x6},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB28, 0x306},
-	{OP_WR, PXP2_REG_RQ_BW_WR_UBOUND29, 0x13},
-	{OP_WR, PXP2_REG_RQ_BW_WR_UBOUND30, 0x6},
-	{OP_WR, PXP2_REG_PSWRQ_BW_L1, 0x1004},
-	{OP_WR, PXP2_REG_PSWRQ_BW_L2, 0x1004},
-	{OP_WR, PXP2_REG_PSWRQ_BW_RD, 0x106440},
-	{OP_WR, PXP2_REG_PSWRQ_BW_WR, 0x106440},
-	{OP_WR_E1H, PXP2_REG_RQ_ILT_MODE, 0x1},
-	{OP_WR, PXP2_REG_RQ_RBC_DONE, 0x1},
-#define PXP2_COMMON_END         2137
-#define MISC_AEU_COMMON_START   2137
-	{OP_ZR, MISC_REG_AEU_GENERAL_ATTN_0, 0x16},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_NIG_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_NIG_0, 0xf0000000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_PXP_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_PXP_0, 0x55555555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_PXP_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_0, 0xf0000000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_1, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_1, 0x55555555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_NIG_1, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_NIG_1, 0xf0000000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_PXP_1, 0x0},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_PXP_1, 0x10000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_PXP_1, 0x5014},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
-	{OP_WR_E1H, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0xc00},
-	{OP_WR_E1H, MISC_REG_AEU_GENERAL_MASK, 0x3},
-#define MISC_AEU_COMMON_END     2156
-#define MISC_AEU_PORT0_START    2156
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xbf5c0000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xff5c0000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff51fef},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff55fff},
-	{OP_WR, MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0, 0xffff},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, 0x500003e0},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, 0xf00003e0},
-	{OP_WR, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1, 0x0},
-	{OP_WR, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1, 0xa000},
-	{OP_ZR, MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1, 0x5},
-	{OP_WR, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2, 0xfe00000},
-	{OP_ZR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3, 0x14},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3, 0x7},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4, 0x400},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_NIG_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5, 0x1000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_NIG_0, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_PXP_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6, 0x4000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_PXP_0, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_PXP_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7, 0x10000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_PXP_0, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x4},
-	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x0},
-	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_0, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_0, 0x7},
-#define MISC_AEU_PORT0_END      2188
-#define MISC_AEU_PORT1_START    2188
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xbf5c0000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xff5c0000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff51fef},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff55fff},
-	{OP_WR, MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0, 0xffff},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, 0x500003e0},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, 0xf00003e0},
-	{OP_WR, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1, 0x0},
-	{OP_WR, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1, 0xa000},
-	{OP_ZR, MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1, 0x5},
-	{OP_WR, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2, 0xfe00000},
-	{OP_ZR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3, 0x14},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3, 0x7},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_NIG_1, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4, 0x800},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_NIG_1, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_NIG_1, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5, 0x2000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_NIG_1, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_PXP_1, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6, 0x8000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_PXP_1, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_PXP_1, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7, 0x20000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x4},
-	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x0},
-	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_1, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_1, 0x7},
-#define MISC_AEU_PORT1_END      2220
-
-};
-
-static const u32 init_data_e1[] = {
-	0x00010000, 0x000204c0, 0x00030980, 0x00040e40, 0x00051300, 0x000617c0,
-	0x00071c80, 0x00082140, 0x00092600, 0x000a2ac0, 0x000b2f80, 0x000c3440,
-	0x000d3900, 0x000e3dc0, 0x000f4280, 0x00104740, 0x00114c00, 0x001250c0,
-	0x00135580, 0x00145a40, 0x00155f00, 0x001663c0, 0x00176880, 0x00186d40,
-	0x00197200, 0x001a76c0, 0x001b7b80, 0x001c8040, 0x001d8500, 0x001e89c0,
-	0x001f8e80, 0x00209340, 0x00002000, 0x00004000, 0x00006000, 0x00008000,
-	0x0000a000, 0x0000c000, 0x0000e000, 0x00010000, 0x00012000, 0x00014000,
-	0x00016000, 0x00018000, 0x0001a000, 0x0001c000, 0x0001e000, 0x00020000,
-	0x00022000, 0x00024000, 0x00026000, 0x00028000, 0x0002a000, 0x0002c000,
-	0x0002e000, 0x00030000, 0x00032000, 0x00034000, 0x00036000, 0x00038000,
-	0x0003a000, 0x0003c000, 0x0003e000, 0x00040000, 0x00042000, 0x00044000,
-	0x00046000, 0x00048000, 0x0004a000, 0x0004c000, 0x0004e000, 0x00050000,
-	0x00052000, 0x00054000, 0x00056000, 0x00058000, 0x0005a000, 0x0005c000,
-	0x0005e000, 0x00060000, 0x00062000, 0x00064000, 0x00066000, 0x00068000,
-	0x0006a000, 0x0006c000, 0x0006e000, 0x00070000, 0x00072000, 0x00074000,
-	0x00076000, 0x00078000, 0x0007a000, 0x0007c000, 0x0007e000, 0x00080000,
-	0x00082000, 0x00084000, 0x00086000, 0x00088000, 0x0008a000, 0x0008c000,
-	0x0008e000, 0x00090000, 0x00092000, 0x00094000, 0x00096000, 0x00098000,
-	0x0009a000, 0x0009c000, 0x0009e000, 0x000a0000, 0x000a2000, 0x000a4000,
-	0x000a6000, 0x000a8000, 0x000aa000, 0x000ac000, 0x000ae000, 0x000b0000,
-	0x000b2000, 0x000b4000, 0x000b6000, 0x000b8000, 0x000ba000, 0x000bc000,
-	0x000be000, 0x000c0000, 0x000c2000, 0x000c4000, 0x000c6000, 0x000c8000,
-	0x000ca000, 0x000cc000, 0x000ce000, 0x000d0000, 0x000d2000, 0x000d4000,
-	0x000d6000, 0x000d8000, 0x000da000, 0x000dc000, 0x000de000, 0x000e0000,
-	0x000e2000, 0x000e4000, 0x000e6000, 0x000e8000, 0x000ea000, 0x000ec000,
-	0x000ee000, 0x000f0000, 0x000f2000, 0x000f4000, 0x000f6000, 0x000f8000,
-	0x000fa000, 0x000fc000, 0x000fe000, 0x00100000, 0x00102000, 0x00104000,
-	0x00106000, 0x00108000, 0x0010a000, 0x0010c000, 0x0010e000, 0x00110000,
-	0x00112000, 0x00114000, 0x00116000, 0x00118000, 0x0011a000, 0x0011c000,
-	0x0011e000, 0x00120000, 0x00122000, 0x00124000, 0x00126000, 0x00128000,
-	0x0012a000, 0x0012c000, 0x0012e000, 0x00130000, 0x00132000, 0x00134000,
-	0x00136000, 0x00138000, 0x0013a000, 0x0013c000, 0x0013e000, 0x00140000,
-	0x00142000, 0x00144000, 0x00146000, 0x00148000, 0x0014a000, 0x0014c000,
-	0x0014e000, 0x00150000, 0x00152000, 0x00154000, 0x00156000, 0x00158000,
-	0x0015a000, 0x0015c000, 0x0015e000, 0x00160000, 0x00162000, 0x00164000,
-	0x00166000, 0x00168000, 0x0016a000, 0x0016c000, 0x0016e000, 0x00170000,
-	0x00172000, 0x00174000, 0x00176000, 0x00178000, 0x0017a000, 0x0017c000,
-	0x0017e000, 0x00180000, 0x00182000, 0x00184000, 0x00186000, 0x00188000,
-	0x0018a000, 0x0018c000, 0x0018e000, 0x00190000, 0x00192000, 0x00194000,
-	0x00196000, 0x00198000, 0x0019a000, 0x0019c000, 0x0019e000, 0x001a0000,
-	0x001a2000, 0x001a4000, 0x001a6000, 0x001a8000, 0x001aa000, 0x001ac000,
-	0x001ae000, 0x001b0000, 0x001b2000, 0x001b4000, 0x001b6000, 0x001b8000,
-	0x001ba000, 0x001bc000, 0x001be000, 0x001c0000, 0x001c2000, 0x001c4000,
-	0x001c6000, 0x001c8000, 0x001ca000, 0x001cc000, 0x001ce000, 0x001d0000,
-	0x001d2000, 0x001d4000, 0x001d6000, 0x001d8000, 0x001da000, 0x001dc000,
-	0x001de000, 0x001e0000, 0x001e2000, 0x001e4000, 0x001e6000, 0x001e8000,
-	0x001ea000, 0x001ec000, 0x001ee000, 0x001f0000, 0x001f2000, 0x001f4000,
-	0x001f6000, 0x001f8000, 0x001fa000, 0x001fc000, 0x001fe000, 0x00200000,
-	0x00202000, 0x00204000, 0x00206000, 0x00208000, 0x0020a000, 0x0020c000,
-	0x0020e000, 0x00210000, 0x00212000, 0x00214000, 0x00216000, 0x00218000,
-	0x0021a000, 0x0021c000, 0x0021e000, 0x00220000, 0x00222000, 0x00224000,
-	0x00226000, 0x00228000, 0x0022a000, 0x0022c000, 0x0022e000, 0x00230000,
-	0x00232000, 0x00234000, 0x00236000, 0x00238000, 0x0023a000, 0x0023c000,
-	0x0023e000, 0x00240000, 0x00242000, 0x00244000, 0x00246000, 0x00248000,
-	0x0024a000, 0x0024c000, 0x0024e000, 0x00250000, 0x00252000, 0x00254000,
-	0x00256000, 0x00258000, 0x0025a000, 0x0025c000, 0x0025e000, 0x00260000,
-	0x00262000, 0x00264000, 0x00266000, 0x00268000, 0x0026a000, 0x0026c000,
-	0x0026e000, 0x00270000, 0x00272000, 0x00274000, 0x00276000, 0x00278000,
-	0x0027a000, 0x0027c000, 0x0027e000, 0x00280000, 0x00282000, 0x00284000,
-	0x00286000, 0x00288000, 0x0028a000, 0x0028c000, 0x0028e000, 0x00290000,
-	0x00292000, 0x00294000, 0x00296000, 0x00298000, 0x0029a000, 0x0029c000,
-	0x0029e000, 0x002a0000, 0x002a2000, 0x002a4000, 0x002a6000, 0x002a8000,
-	0x002aa000, 0x002ac000, 0x002ae000, 0x002b0000, 0x002b2000, 0x002b4000,
-	0x002b6000, 0x002b8000, 0x002ba000, 0x002bc000, 0x002be000, 0x002c0000,
-	0x002c2000, 0x002c4000, 0x002c6000, 0x002c8000, 0x002ca000, 0x002cc000,
-	0x002ce000, 0x002d0000, 0x002d2000, 0x002d4000, 0x002d6000, 0x002d8000,
-	0x002da000, 0x002dc000, 0x002de000, 0x002e0000, 0x002e2000, 0x002e4000,
-	0x002e6000, 0x002e8000, 0x002ea000, 0x002ec000, 0x002ee000, 0x002f0000,
-	0x002f2000, 0x002f4000, 0x002f6000, 0x002f8000, 0x002fa000, 0x002fc000,
-	0x002fe000, 0x00300000, 0x00302000, 0x00304000, 0x00306000, 0x00308000,
-	0x0030a000, 0x0030c000, 0x0030e000, 0x00310000, 0x00312000, 0x00314000,
-	0x00316000, 0x00318000, 0x0031a000, 0x0031c000, 0x0031e000, 0x00320000,
-	0x00322000, 0x00324000, 0x00326000, 0x00328000, 0x0032a000, 0x0032c000,
-	0x0032e000, 0x00330000, 0x00332000, 0x00334000, 0x00336000, 0x00338000,
-	0x0033a000, 0x0033c000, 0x0033e000, 0x00340000, 0x00342000, 0x00344000,
-	0x00346000, 0x00348000, 0x0034a000, 0x0034c000, 0x0034e000, 0x00350000,
-	0x00352000, 0x00354000, 0x00356000, 0x00358000, 0x0035a000, 0x0035c000,
-	0x0035e000, 0x00360000, 0x00362000, 0x00364000, 0x00366000, 0x00368000,
-	0x0036a000, 0x0036c000, 0x0036e000, 0x00370000, 0x00372000, 0x00374000,
-	0x00376000, 0x00378000, 0x0037a000, 0x0037c000, 0x0037e000, 0x00380000,
-	0x00382000, 0x00384000, 0x00386000, 0x00388000, 0x0038a000, 0x0038c000,
-	0x0038e000, 0x00390000, 0x00392000, 0x00394000, 0x00396000, 0x00398000,
-	0x0039a000, 0x0039c000, 0x0039e000, 0x003a0000, 0x003a2000, 0x003a4000,
-	0x003a6000, 0x003a8000, 0x003aa000, 0x003ac000, 0x003ae000, 0x003b0000,
-	0x003b2000, 0x003b4000, 0x003b6000, 0x003b8000, 0x003ba000, 0x003bc000,
-	0x003be000, 0x003c0000, 0x003c2000, 0x003c4000, 0x003c6000, 0x003c8000,
-	0x003ca000, 0x003cc000, 0x003ce000, 0x003d0000, 0x003d2000, 0x003d4000,
-	0x003d6000, 0x003d8000, 0x003da000, 0x003dc000, 0x003de000, 0x003e0000,
-	0x003e2000, 0x003e4000, 0x003e6000, 0x003e8000, 0x003ea000, 0x003ec000,
-	0x003ee000, 0x003f0000, 0x003f2000, 0x003f4000, 0x003f6000, 0x003f8000,
-	0x003fa000, 0x003fc000, 0x003fe000, 0x003fe001, 0x00000000, 0x000001ff,
-	0x00000200, 0x00000001, 0x00000003, 0x00bebc20, 0x00000003, 0x00bebc20,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0x00000000, 0x00007ff8, 0x00000000, 0x00003500,
-	0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000003,
-	0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff,
-	0x00000003, 0x00bebc20, 0x00002000, 0x000040c0, 0x00006180, 0x00008240,
-	0x0000a300, 0x0000c3c0, 0x0000e480, 0x00010540, 0x00012600, 0x000146c0,
-	0x00016780, 0x00018840, 0x0001a900, 0x0001c9c0, 0x0001ea80, 0x00020b40,
-	0x00022c00, 0x00024cc0, 0x00026d80, 0x00028e40, 0x0002af00, 0x0002cfc0,
-	0x0002f080, 0x00031140, 0x00033200, 0x000352c0, 0x00037380, 0x00039440,
-	0x0003b500, 0x0003d5c0, 0x0003f680, 0x00041740, 0x00043800, 0x000458c0,
-	0x00047980, 0x00049a40, 0x00008000, 0x00010380, 0x00018700, 0x00020a80,
-	0x00028e00, 0x00031180, 0x00039500, 0x00041880, 0x00049c00, 0x00051f80,
-	0x0005a300, 0x00062680, 0x0006aa00, 0x00072d80, 0x0007b100, 0x00083480,
-	0x0008b800, 0x00093b80, 0x0009bf00, 0x000a4280, 0x000ac600, 0x000b4980,
-	0x000bcd00, 0x000c5080, 0x000cd400, 0x000d5780, 0x000ddb00, 0x00001900,
-	0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00001500, 0x00001000, 0x00002080,
-	0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300, 0x00008380,
-	0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680,
-	0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900, 0x00014980,
-	0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80,
-	0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00, 0x10000000,
-	0x000028ad, 0x00000000, 0x00010001, 0x00350804, 0xccccccc1, 0xffffffff,
-	0xffffffff, 0x7058103c, 0x00000000, 0xcccc0201, 0xcccccccc, 0x00000000,
-	0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000,
-	0x00003500, 0x000e01b7, 0x011600d6, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0x007201bb, 0x012300f3, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x00100000, 0x00000000, 0xfffffff3,
-	0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xfffffff1, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
-	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7,
-	0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x310fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x30efffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
-	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
-	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
-	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffff97, 0x056fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
-	0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
-	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffff8a, 0x042fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
-	0x05cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x300fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x040fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0x00100000, 0x00070100, 0x00028170, 0x000b8198, 0x00020250,
-	0x00010270, 0x000f0280, 0x00010370, 0x00080000, 0x00080080, 0x00028100,
-	0x000b8128, 0x000201e0, 0x00010200, 0x00070210, 0x00020280, 0x000f0000,
-	0x000800f0, 0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000b8280,
-	0x00080338, 0x00100000, 0x00080100, 0x00028180, 0x000b81a8, 0x00020260,
-	0x00018280, 0x000e8298, 0x00080380, 0x00028000, 0x000b8028, 0x000200e0,
-	0x00010100, 0x00008110, 0x00000118, 0xcccccccc, 0xcccccccc, 0xcccccccc,
-	0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc,
-	0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000
-};
-
-static const u32 init_data_e1h[] = {
-	0x00010000, 0x000204c0, 0x00030980, 0x00040e40, 0x00051300, 0x000617c0,
-	0x00071c80, 0x00082140, 0x00092600, 0x000a2ac0, 0x000b2f80, 0x000c3440,
-	0x000d3900, 0x000e3dc0, 0x000f4280, 0x00104740, 0x00114c00, 0x001250c0,
-	0x00135580, 0x00145a40, 0x00155f00, 0x001663c0, 0x00176880, 0x00186d40,
-	0x00197200, 0x001a76c0, 0x001b7b80, 0x001c8040, 0x001d8500, 0x001e89c0,
-	0x001f8e80, 0x00209340, 0x00002000, 0x00004000, 0x00006000, 0x00008000,
-	0x0000a000, 0x0000c000, 0x0000e000, 0x00010000, 0x00012000, 0x00014000,
-	0x00016000, 0x00018000, 0x0001a000, 0x0001c000, 0x0001e000, 0x00020000,
-	0x00022000, 0x00024000, 0x00026000, 0x00028000, 0x0002a000, 0x0002c000,
-	0x0002e000, 0x00030000, 0x00032000, 0x00034000, 0x00036000, 0x00038000,
-	0x0003a000, 0x0003c000, 0x0003e000, 0x00040000, 0x00042000, 0x00044000,
-	0x00046000, 0x00048000, 0x0004a000, 0x0004c000, 0x0004e000, 0x00050000,
-	0x00052000, 0x00054000, 0x00056000, 0x00058000, 0x0005a000, 0x0005c000,
-	0x0005e000, 0x00060000, 0x00062000, 0x00064000, 0x00066000, 0x00068000,
-	0x0006a000, 0x0006c000, 0x0006e000, 0x00070000, 0x00072000, 0x00074000,
-	0x00076000, 0x00078000, 0x0007a000, 0x0007c000, 0x0007e000, 0x00080000,
-	0x00082000, 0x00084000, 0x00086000, 0x00088000, 0x0008a000, 0x0008c000,
-	0x0008e000, 0x00090000, 0x00092000, 0x00094000, 0x00096000, 0x00098000,
-	0x0009a000, 0x0009c000, 0x0009e000, 0x000a0000, 0x000a2000, 0x000a4000,
-	0x000a6000, 0x000a8000, 0x000aa000, 0x000ac000, 0x000ae000, 0x000b0000,
-	0x000b2000, 0x000b4000, 0x000b6000, 0x000b8000, 0x000ba000, 0x000bc000,
-	0x000be000, 0x000c0000, 0x000c2000, 0x000c4000, 0x000c6000, 0x000c8000,
-	0x000ca000, 0x000cc000, 0x000ce000, 0x000d0000, 0x000d2000, 0x000d4000,
-	0x000d6000, 0x000d8000, 0x000da000, 0x000dc000, 0x000de000, 0x000e0000,
-	0x000e2000, 0x000e4000, 0x000e6000, 0x000e8000, 0x000ea000, 0x000ec000,
-	0x000ee000, 0x000f0000, 0x000f2000, 0x000f4000, 0x000f6000, 0x000f8000,
-	0x000fa000, 0x000fc000, 0x000fe000, 0x00100000, 0x00102000, 0x00104000,
-	0x00106000, 0x00108000, 0x0010a000, 0x0010c000, 0x0010e000, 0x00110000,
-	0x00112000, 0x00114000, 0x00116000, 0x00118000, 0x0011a000, 0x0011c000,
-	0x0011e000, 0x00120000, 0x00122000, 0x00124000, 0x00126000, 0x00128000,
-	0x0012a000, 0x0012c000, 0x0012e000, 0x00130000, 0x00132000, 0x00134000,
-	0x00136000, 0x00138000, 0x0013a000, 0x0013c000, 0x0013e000, 0x00140000,
-	0x00142000, 0x00144000, 0x00146000, 0x00148000, 0x0014a000, 0x0014c000,
-	0x0014e000, 0x00150000, 0x00152000, 0x00154000, 0x00156000, 0x00158000,
-	0x0015a000, 0x0015c000, 0x0015e000, 0x00160000, 0x00162000, 0x00164000,
-	0x00166000, 0x00168000, 0x0016a000, 0x0016c000, 0x0016e000, 0x00170000,
-	0x00172000, 0x00174000, 0x00176000, 0x00178000, 0x0017a000, 0x0017c000,
-	0x0017e000, 0x00180000, 0x00182000, 0x00184000, 0x00186000, 0x00188000,
-	0x0018a000, 0x0018c000, 0x0018e000, 0x00190000, 0x00192000, 0x00194000,
-	0x00196000, 0x00198000, 0x0019a000, 0x0019c000, 0x0019e000, 0x001a0000,
-	0x001a2000, 0x001a4000, 0x001a6000, 0x001a8000, 0x001aa000, 0x001ac000,
-	0x001ae000, 0x001b0000, 0x001b2000, 0x001b4000, 0x001b6000, 0x001b8000,
-	0x001ba000, 0x001bc000, 0x001be000, 0x001c0000, 0x001c2000, 0x001c4000,
-	0x001c6000, 0x001c8000, 0x001ca000, 0x001cc000, 0x001ce000, 0x001d0000,
-	0x001d2000, 0x001d4000, 0x001d6000, 0x001d8000, 0x001da000, 0x001dc000,
-	0x001de000, 0x001e0000, 0x001e2000, 0x001e4000, 0x001e6000, 0x001e8000,
-	0x001ea000, 0x001ec000, 0x001ee000, 0x001f0000, 0x001f2000, 0x001f4000,
-	0x001f6000, 0x001f8000, 0x001fa000, 0x001fc000, 0x001fe000, 0x00200000,
-	0x00202000, 0x00204000, 0x00206000, 0x00208000, 0x0020a000, 0x0020c000,
-	0x0020e000, 0x00210000, 0x00212000, 0x00214000, 0x00216000, 0x00218000,
-	0x0021a000, 0x0021c000, 0x0021e000, 0x00220000, 0x00222000, 0x00224000,
-	0x00226000, 0x00228000, 0x0022a000, 0x0022c000, 0x0022e000, 0x00230000,
-	0x00232000, 0x00234000, 0x00236000, 0x00238000, 0x0023a000, 0x0023c000,
-	0x0023e000, 0x00240000, 0x00242000, 0x00244000, 0x00246000, 0x00248000,
-	0x0024a000, 0x0024c000, 0x0024e000, 0x00250000, 0x00252000, 0x00254000,
-	0x00256000, 0x00258000, 0x0025a000, 0x0025c000, 0x0025e000, 0x00260000,
-	0x00262000, 0x00264000, 0x00266000, 0x00268000, 0x0026a000, 0x0026c000,
-	0x0026e000, 0x00270000, 0x00272000, 0x00274000, 0x00276000, 0x00278000,
-	0x0027a000, 0x0027c000, 0x0027e000, 0x00280000, 0x00282000, 0x00284000,
-	0x00286000, 0x00288000, 0x0028a000, 0x0028c000, 0x0028e000, 0x00290000,
-	0x00292000, 0x00294000, 0x00296000, 0x00298000, 0x0029a000, 0x0029c000,
-	0x0029e000, 0x002a0000, 0x002a2000, 0x002a4000, 0x002a6000, 0x002a8000,
-	0x002aa000, 0x002ac000, 0x002ae000, 0x002b0000, 0x002b2000, 0x002b4000,
-	0x002b6000, 0x002b8000, 0x002ba000, 0x002bc000, 0x002be000, 0x002c0000,
-	0x002c2000, 0x002c4000, 0x002c6000, 0x002c8000, 0x002ca000, 0x002cc000,
-	0x002ce000, 0x002d0000, 0x002d2000, 0x002d4000, 0x002d6000, 0x002d8000,
-	0x002da000, 0x002dc000, 0x002de000, 0x002e0000, 0x002e2000, 0x002e4000,
-	0x002e6000, 0x002e8000, 0x002ea000, 0x002ec000, 0x002ee000, 0x002f0000,
-	0x002f2000, 0x002f4000, 0x002f6000, 0x002f8000, 0x002fa000, 0x002fc000,
-	0x002fe000, 0x00300000, 0x00302000, 0x00304000, 0x00306000, 0x00308000,
-	0x0030a000, 0x0030c000, 0x0030e000, 0x00310000, 0x00312000, 0x00314000,
-	0x00316000, 0x00318000, 0x0031a000, 0x0031c000, 0x0031e000, 0x00320000,
-	0x00322000, 0x00324000, 0x00326000, 0x00328000, 0x0032a000, 0x0032c000,
-	0x0032e000, 0x00330000, 0x00332000, 0x00334000, 0x00336000, 0x00338000,
-	0x0033a000, 0x0033c000, 0x0033e000, 0x00340000, 0x00342000, 0x00344000,
-	0x00346000, 0x00348000, 0x0034a000, 0x0034c000, 0x0034e000, 0x00350000,
-	0x00352000, 0x00354000, 0x00356000, 0x00358000, 0x0035a000, 0x0035c000,
-	0x0035e000, 0x00360000, 0x00362000, 0x00364000, 0x00366000, 0x00368000,
-	0x0036a000, 0x0036c000, 0x0036e000, 0x00370000, 0x00372000, 0x00374000,
-	0x00376000, 0x00378000, 0x0037a000, 0x0037c000, 0x0037e000, 0x00380000,
-	0x00382000, 0x00384000, 0x00386000, 0x00388000, 0x0038a000, 0x0038c000,
-	0x0038e000, 0x00390000, 0x00392000, 0x00394000, 0x00396000, 0x00398000,
-	0x0039a000, 0x0039c000, 0x0039e000, 0x003a0000, 0x003a2000, 0x003a4000,
-	0x003a6000, 0x003a8000, 0x003aa000, 0x003ac000, 0x003ae000, 0x003b0000,
-	0x003b2000, 0x003b4000, 0x003b6000, 0x003b8000, 0x003ba000, 0x003bc000,
-	0x003be000, 0x003c0000, 0x003c2000, 0x003c4000, 0x003c6000, 0x003c8000,
-	0x003ca000, 0x003cc000, 0x003ce000, 0x003d0000, 0x003d2000, 0x003d4000,
-	0x003d6000, 0x003d8000, 0x003da000, 0x003dc000, 0x003de000, 0x003e0000,
-	0x003e2000, 0x003e4000, 0x003e6000, 0x003e8000, 0x003ea000, 0x003ec000,
-	0x003ee000, 0x003f0000, 0x003f2000, 0x003f4000, 0x003f6000, 0x003f8000,
-	0x003fa000, 0x003fc000, 0x003fe000, 0x003fe001, 0x00000000, 0x000001ff,
-	0x00000200, 0x00000001, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00003500, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000,
-	0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff,
-	0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000003,
-	0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff,
-	0x00000003, 0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000,
-	0xffffffff, 0x00000003, 0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff,
-	0x00000000, 0xffffffff, 0x00000003, 0x00bebc20, 0xffffffff, 0x00000000,
-	0xffffffff, 0x00000000, 0xffffffff, 0x00000003, 0x00bebc20, 0xffffffff,
-	0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000003, 0x00bebc20,
-	0x00002000, 0x000040c0, 0x00006180, 0x00008240, 0x0000a300, 0x0000c3c0,
-	0x0000e480, 0x00010540, 0x00012600, 0x000146c0, 0x00016780, 0x00018840,
-	0x0001a900, 0x0001c9c0, 0x0001ea80, 0x00020b40, 0x00022c00, 0x00024cc0,
-	0x00026d80, 0x00028e40, 0x0002af00, 0x0002cfc0, 0x0002f080, 0x00031140,
-	0x00033200, 0x000352c0, 0x00037380, 0x00039440, 0x0003b500, 0x0003d5c0,
-	0x0003f680, 0x00041740, 0x00043800, 0x000458c0, 0x00047980, 0x00049a40,
-	0x00008000, 0x00010380, 0x00018700, 0x00020a80, 0x00028e00, 0x00031180,
-	0x00039500, 0x00041880, 0x00049c00, 0x00051f80, 0x0005a300, 0x00062680,
-	0x0006aa00, 0x00072d80, 0x0007b100, 0x00083480, 0x0008b800, 0x00093b80,
-	0x0009bf00, 0x000a4280, 0x000ac600, 0x000b4980, 0x000bcd00, 0x000c5080,
-	0x000cd400, 0x000d5780, 0x000ddb00, 0x00001900, 0x00000028, 0x00100000,
-	0x00000000, 0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000,
-	0x00007ff8, 0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x00000000, 0x00007ff8, 0x00000000, 0x00001500, 0x00001000,
-	0x00002080, 0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300,
-	0x00008380, 0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600,
-	0x0000e680, 0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900,
-	0x00014980, 0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00,
-	0x0001ac80, 0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00,
-	0x10000000, 0x000028ad, 0x00000000, 0x00010001, 0x00350804, 0xccccccc5,
-	0xffffffff, 0xffffffff, 0x7058103c, 0x00000000, 0xcccc0201, 0xcccccccc,
-	0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc,
-	0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc,
-	0xcccc0201, 0xcccccccc, 0x00000000, 0xffffffff, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00003500, 0x000e0232, 0x011600d6,
-	0x00100000, 0x00000000, 0x00720236, 0x012300f3, 0x00100000, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x30efffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd,
-	0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3,
-	0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd,
-	0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x302fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd,
-	0xfffffff3, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd,
-	0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3,
-	0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd,
-	0xfffffff7, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x31efffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd,
-	0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff,
-	0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd,
-	0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x056fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd,
-	0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd,
-	0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3,
-	0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd,
-	0xffffff8a, 0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3,
-	0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd,
-	0xfffffff3, 0x316fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x302fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd,
-	0xfffffff6, 0x30bfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf314, 0xf3cf3cf3,
-	0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd,
-	0xfffffff7, 0x31cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0020cf3c, 0xcdcdcdcd, 0xfffffff0, 0x307fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0002cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0010cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0000cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0004cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000, 0x00070100,
-	0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000f0280, 0x00010370,
-	0x00080000, 0x00080080, 0x00028100, 0x000b8128, 0x000201e0, 0x00010200,
-	0x00070210, 0x00020280, 0x000f0000, 0x000800f0, 0x00028170, 0x000b8198,
-	0x00020250, 0x00010270, 0x000b8280, 0x00080338, 0x00100000, 0x00080100,
-	0x00028180, 0x000b81a8, 0x00020260, 0x00018280, 0x000e8298, 0x00080380,
-	0x000b0000, 0x000100b0, 0x000280c0, 0x000580e8, 0x00020140, 0x00010160,
-	0x000e0170, 0x00038250, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc,
-	0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x04002000
-};
-
-static const u32 tsem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x19d9458a, 0x1138fc18,
-	0x5980a1fc, 0xd8181998, 0x88039880, 0x81b8803d, 0x91a18191, 0xdafd7891,
-	0xbf760862, 0x6ec30330, 0x0211e620, 0x1082239a, 0xf354029f, 0x0f5fc806,
-	0x6512b315, 0x3a263860, 0x06a77ef0, 0x298d2ade, 0xc1124536, 0x1e4586de,
-	0x93476f19, 0xca8922ff, 0xff4041df, 0x65296340, 0x229dbe54, 0x04a65e84,
-	0xe4d1a5a1, 0xd7f2a1ed, 0x5192fea1, 0x0dee6ec6, 0xf8003ca8, 0x6065495c,
-	0x00606549
-};
-
-static const u32 tsem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7dedff00, 0xd554780b, 0x733ef0b5, 0x49999cce,
-	0x424e4cce, 0x4c22f212, 0x21a08812, 0x8a80af0c, 0x2201277f, 0x282039f5,
-	0x4201d458, 0xd4837908, 0xcdedaf4b, 0x11102484, 0x0547f435, 0x5088768b,
-	0x340da2d1, 0x0ec160d2, 0x6d7b1420, 0xc0faf06f, 0x480bf5ea, 0xb12f3141,
-	0xcbc57e20, 0xe7dad6bf, 0x264ce664, 0xafdbd880, 0xb4fdffff, 0xece7d9b8,
-	0xebdaf7b3, 0x7b5ad7b5, 0x75923ded, 0xc7bf9302, 0x03fc45d8, 0x8c4d4fe5,
-	0xf2c109b1, 0x80f66667, 0xc9b18727, 0x473afebd, 0x6d55633c, 0x9da23b19,
-	0x99ec258c, 0x50281421, 0x2c23d5fe, 0xbfdf8250, 0xf097c365, 0x4219b6ff,
-	0xd0977c3e, 0xc3e611e9, 0x02d5e4fb, 0x933a876b, 0xea0c319c, 0x4b19b98c,
-	0x126b2c64, 0x4b223fa3, 0xe0ff828d, 0x8f392573, 0x27fc34b1, 0x61467574,
-	0xc678c0ae, 0x5c531e32, 0x38a9d0d4, 0x843f7815, 0xbcd2c67f, 0x0731b725,
-	0xbc03cf63, 0xbcf071c9, 0x61de3a5a, 0xc22eefe5, 0x3af3a1df, 0xae58cd6a,
-	0x32773e30, 0x416589a7, 0xf3e33ebf, 0x3d6346ac, 0x4fe3d99b, 0xec3fc346,
-	0x8c517ecc, 0xb1138f30, 0xcb3c018c, 0x632f0e54, 0x5467b2bd, 0x6a9b1f10,
-	0x2c32a258, 0x852f0f58, 0x56338765, 0xed975e03, 0xf8165c16, 0x2f6c39fe,
-	0xbed7e631, 0x15ead66b, 0xa362593e, 0xb50404a1, 0x67eff4e4, 0x11bfcb11,
-	0x2b30fef1, 0xea4ab2a0, 0xaf805595, 0xfb765aaa, 0x67edfe95, 0x54e88933,
-	0x5bf6b929, 0x5adefc61, 0xf1866ae6, 0x02d59997, 0x91fb2fac, 0x7a83e5d3,
-	0x21476366, 0x36d0fa83, 0xc1198981, 0x9e00afef, 0x007f91db, 0xa52b2a1e,
-	0x740642de, 0xb02bddec, 0x871c0ce6, 0x776cbbf7, 0x0c65f306, 0x6658e70c,
-	0x32e73826, 0x74893a41, 0xd2073071, 0xf324bcc1, 0xcea84289, 0xb0f3dc54,
-	0x9de29f7f, 0xe7f4ed87, 0x38e60b49, 0xf25700bd, 0x57a06650, 0x9d3ab5b1,
-	0xea563265, 0xbe442969, 0x8decb538, 0x9e025855, 0xf7c02413, 0x08a78b7c,
-	0x5798a9fb, 0xa780cd9d, 0x8d1859e6, 0xff2db43f, 0x0cf80933, 0xc4c5f3ba,
-	0x76313f21, 0xf04f843c, 0x5a11f1cf, 0xde981c5d, 0xb08b2b97, 0x05f1091f,
-	0x1f011772, 0x26a0423f, 0x544d28e0, 0x29fc573a, 0xd0a0d86b, 0xc3595bfa,
-	0xe50069c6, 0x3f0cbc11, 0x0843ac61, 0x1cbd4be5, 0xb0ff3bba, 0x3c303b94,
-	0x04f3d3ff, 0xab7e1274, 0x1fc8b700, 0xbfd97615, 0xca61f812, 0xf7c0e6ab,
-	0x362a3f80, 0xd40b7e0b, 0xe8dbaf4d, 0x5e26f77d, 0x3765d80f, 0x16d74ff2,
-	0xbdf00ba8, 0x1bf1fda5, 0x155ebf91, 0x3b763359, 0xfa84ca22, 0x3b06a4e5,
-	0xc0750f1b, 0x578db147, 0xbbef362b, 0x692fbf1f, 0xf41b30b3, 0xf17bb157,
-	0x7d42371d, 0xc33361f1, 0x6b5b1526, 0x2fa814e5, 0x582d0bf1, 0xf0e029ef,
-	0xfe8976f9, 0xc7bed0ad, 0x1b389ed1, 0xc6ba73e8, 0x63329cca, 0xc4f6f675,
-	0xa567c059, 0xf8851dfe, 0xc176e95d, 0xf29f6885, 0xc943d6ea, 0xb917af38,
-	0x8b6d977c, 0x7f1d4e66, 0xab64f7f0, 0xbc1ef818, 0x64f3065f, 0xd662efd0,
-	0xb07a8854, 0xd93aeb62, 0xebe20f69, 0xe34a8d74, 0x8bdfc9f4, 0x577c0e30,
-	0xc2e08af9, 0x989a5629, 0x7bb0e517, 0xf3ce6db7, 0x56afce0a, 0xbce3b6ce,
-	0x6ed8cb56, 0x2efe7fb1, 0xfea5cd54, 0xbc2172cd, 0x59b4dd2f, 0xdb910e2e,
-	0x8c836db2, 0x1ac86d70, 0xd7208dec, 0xd7807841, 0x52f583b2, 0x0fa803d4,
-	0x233cbf25, 0x852acf84, 0xb2cbe258, 0x1a73226d, 0xddd388f8, 0x13fc2ef7,
-	0x6bdbe5f0, 0x74eabc27, 0x1aa7d3eb, 0x1aa8cedd, 0xbcdea51d, 0xf8f81119,
-	0xc003a471, 0x827884d3, 0x9f06ad72, 0x97cb3263, 0x9b877fa0, 0x3cbb02a9,
-	0xd999365f, 0xf563067c, 0xd2dd07b0, 0xd99750f5, 0xf582e652, 0x7bb1fa50,
-	0x0493d42a, 0x9f3867ef, 0xc25bc17a, 0x2496abd7, 0x9579e00f, 0xfce0e6c0,
-	0x30d0218f, 0xc0c955af, 0xa6f7809f, 0x8bcf7969, 0x3c7b0682, 0xb17f8bd6,
-	0x39fa8326, 0xa198fd43, 0xf7cbac9f, 0x324e16a3, 0x9616a3f4, 0x8dfcfde8,
-	0x595db1fa, 0x37854d3f, 0x2c29e118, 0x0491fbd5, 0xbf6f5768, 0x37a979b2,
-	0x73c2364f, 0x13f53973, 0xbcc5d53b, 0x1ae7ae0a, 0xb776b03f, 0xed95ef08,
-	0xb0d763b1, 0x5028be50, 0x0edb8005, 0x17ca1252, 0x0ca29331, 0x8eeb187c,
-	0x27a1d433, 0x4175e4f5, 0x958813fd, 0x45397c69, 0x9f90bd26, 0x43faa562,
-	0x85e90a29, 0x5ef06e87, 0x8e20eb83, 0x2ea192cd, 0x11ab477b, 0x14e01af8,
-	0x60961258, 0x7ff52417, 0xf1ccdabf, 0x217a9050, 0x5f7c18fb, 0x8ecdea65,
-	0xa635fa85, 0x6f116bfc, 0xe5eb812e, 0x63559128, 0x230b28bb, 0x233ab4fd,
-	0x085f79ef, 0x00871a9e, 0xbf6085fd, 0x126f668d, 0xdaf8d7f2, 0xc0127c67,
-	0xcc086ab7, 0x12ba0527, 0x60f8099e, 0xa43d5a3d, 0x69f10938, 0x43be4191,
-	0xfc6197c7, 0x06ff1a1c, 0xc71ba3c4, 0xbe3fe84f, 0x61927325, 0x897a6b7c,
-	0x0cab7c61, 0x4fbf03e3, 0xc6d66dad, 0xc0ddfc07, 0x99a134d8, 0x97a4b7c6,
-	0x65abf8d0, 0x3f186256, 0x5bfc6faa, 0x819efe70, 0x83799fe6, 0xa5e9fe71,
-	0x7ccbf9c6, 0x5f6ab3fe, 0xa28fc6d2, 0x5e16cff9, 0x2f4ff3e2, 0xf0b7f3e5,
-	0x77c6fb7e, 0x5effe1f4, 0x8077bf9c, 0x93592df1, 0x5a1ff38d, 0x85bf9c6e,
-	0xbb545f8f, 0xa15f1b53, 0x3b0917f1, 0x9687fcf9, 0xc5b2f8d3, 0x923e42eb,
-	0xfdaaa353, 0x81a44f68, 0x1d260c40, 0x0472a6e5, 0x1fa00518, 0x04990a86,
-	0x9c5143c7, 0x0145ceef, 0x7d4129bf, 0x5120fcc7, 0x352acfa0, 0x9edb2f9e,
-	0xa59ea32f, 0x376889f7, 0x6d453ff1, 0x6c37ad22, 0x1c3fc5bd, 0x136eede0,
-	0x5a2f587d, 0xa45f937f, 0xe5db8ef5, 0xf005c660, 0x1c9e5ff9, 0xaf3a1cd5,
-	0x935172f0, 0x418764f9, 0xbe3c388e, 0x1aa23602, 0x26476be0, 0x9fac1098,
-	0xc60a3d04, 0x7a0e3b2f, 0x6653cb14, 0x009c8f6e, 0x50e4cb3d, 0xf6e5a9b9,
-	0x93bd8f88, 0x5bbaf303, 0xc4a4ff83, 0xb9727df1, 0x9ffc47e0, 0x4654b75b,
-	0x09a8b4fd, 0x7910e98c, 0xd4e8d2af, 0x6fe2dbbb, 0x4e9f0816, 0x243dcfc4,
-	0x97fd8c8a, 0xde2fd766, 0xddf0c830, 0x486fe63c, 0xd70bf682, 0xc2a21fce,
-	0xc7307ffc, 0x53ed1632, 0x13548490, 0x354b31c9, 0xa7316f81, 0x15399d75,
-	0x31ccf72a, 0xb9faec1b, 0x07fd635e, 0xb77ac625, 0xa1366fd9, 0x6044b1bd,
-	0xfbdfa19b, 0xf5ef8daa, 0x71093671, 0x78daae9c, 0x78722777, 0x2c72c3ef,
-	0xae89563e, 0x5bfcabf7, 0x87aa9e1d, 0xeb402ccd, 0x43024765, 0xc812fa3a,
-	0x7caaf35e, 0xdef0e1de, 0x3dbab66f, 0x3ffdcf00, 0xe19f0912, 0x1ebc77f0,
-	0x1d8136ed, 0x4be1b1d7, 0xe1b7da33, 0xff8709f3, 0xf3e11581, 0xf7d46551,
-	0xcfe17df3, 0xf3849f39, 0xfe5b5553, 0xed2113a0, 0x3fbe5a2a, 0x7f0844e8,
-	0x619b6d95, 0xcff12fa8, 0xbc5fb435, 0xfde1be61, 0x8625a6a2, 0x971b0bf7,
-	0x7df3ea1a, 0x7fb4323f, 0xe1ad4560, 0x8fd57dfd, 0xa0ffde18, 0x3ea19d64,
-	0xd0d1bbd7, 0x9b399efe, 0xaf4def0d, 0xe513bc8f, 0x915deea8, 0x5671bae1,
-	0xda38f939, 0xc9156783, 0xb4f8f485, 0xe0e48926, 0xca938d74, 0x5671b6ee,
-	0xc583d72f, 0x5e9c4c0c, 0x71af9ce1, 0x4665ea32, 0xc2aff3fa, 0xea0f9f05,
-	0x849c137f, 0xcc83713f, 0x02c2c002, 0xe3e3eb8b, 0x7de4315e, 0x6fde65c7,
-	0xd71f4100, 0x11d8bdff, 0xf35579f9, 0x046aa1fc, 0xb72821ff, 0xb9d7152c,
-	0x0f7d6d1e, 0x302e5f7f, 0xc673e84f, 0xd79c9256, 0xb94ceb69, 0xf941f5cc,
-	0xf402e4ce, 0x40e5cbbf, 0xc6a5f576, 0xa2a4016b, 0x3ceb449e, 0xa401f901,
-	0x592fc0c0, 0xdceef906, 0x955c1227, 0xaf4013a8, 0xc19e63ae, 0x8133d426,
-	0x8d77e903, 0x49dc3842, 0xa04b6f54, 0x66b3bd75, 0x1213a0fa, 0xe543c7d2,
-	0xa87335a7, 0xa5e3593c, 0x094d44f2, 0xaa6bc795, 0x59a8eca9, 0x35c7e541,
-	0xaa3f2a3e, 0xcff2a469, 0x1e544d35, 0xe540d9ad, 0x2a7e357b, 0x54dc6bbb,
-	0xba2bf9f6, 0xecd78dfe, 0x80afcd55, 0x67ea8795, 0x43d4b9b4, 0x739276db,
-	0xf9ca1257, 0x365ce519, 0x8e67e3da, 0x31996382, 0xf9c2be30, 0xba3a606d,
-	0xf6295ec9, 0xf5c7fd03, 0xe28b6f7f, 0xd899b274, 0xd9a67074, 0xe17fc323,
-	0x7543905a, 0x16065909, 0x7b0cd724, 0xed617e84, 0x8e5d7a43, 0x9bddcc4e,
-	0x71e8133b, 0xe5bf99f2, 0xda75bf61, 0x407517fa, 0x059875a4, 0xbd21779e,
-	0xeb46f042, 0x9aabef5a, 0xfe0cbfbe, 0xd7f0faba, 0xfbfe8e9e, 0xfea54141,
-	0x985ab4cf, 0x13dc7884, 0x67e607ed, 0xef3f0e67, 0x965c7940, 0x444f5264,
-	0x565e83c0, 0x4aa864b4, 0x66d3fae8, 0x12699fac, 0x7ad0b7a6, 0x35998cec,
-	0x554af90a, 0xfa430c4f, 0xf7a95127, 0x56492cb3, 0x9ebc804f, 0xc31596de,
-	0x5f3f6fd7, 0x12c7b707, 0x485f82bf, 0xf0deffed, 0x0e8fd40c, 0xecad630f,
-	0x03ea2b13, 0xedf59778, 0xfd2672fd, 0x6c57e295, 0xda1cf98f, 0x7bf8160b,
-	0x1207e291, 0xab7ef5d5, 0x659f445a, 0x6edf3e34, 0x73be0f18, 0xc5f73eea,
-	0xadf14bcc, 0xc4864ec4, 0xf169d611, 0x366db2c6, 0xc4aeb8d5, 0x6d55ea1a,
-	0x9d61aac9, 0xfc807fc1, 0x42416ab3, 0xb8d729be, 0x1a5247a8, 0xdcaf8005,
-	0xab7ea4e4, 0xc2aede04, 0xe17b21da, 0xa72b5751, 0x9df040db, 0x94ec39ae,
-	0xac4bde40, 0x7c0201e0, 0xa7232d25, 0x6aeb9ea2, 0x7b444bad, 0xf33c4cb0,
-	0xf7c22790, 0x8d024d3b, 0xee6fc4b7, 0x1aa3ae35, 0x57e8307f, 0x167e4e7f,
-	0xd4864e53, 0xcedc4d3b, 0x80f7ef0e, 0xf0e5efd6, 0x48fdb953, 0xfece8de1,
-	0xfb6caa78, 0x1c92f642, 0x82f2ffc1, 0x57f1d278, 0x401cf26e, 0xedba5a7d,
-	0x9fa3d918, 0x0fd97d9a, 0xf53f425f, 0x44929f9f, 0x5e7d5271, 0x6129303e,
-	0x7c5a059c, 0x9ef7f817, 0xfd3d610f, 0x6ccddfec, 0x2ec7c00d, 0x6f782b40,
-	0x13335fd6, 0xa17d4133, 0x5ad05b56, 0xcfdd7146, 0x2a8edc4c, 0xd1071e62,
-	0xa1e53581, 0x4cc5d91d, 0x5d4f11d3, 0xb8c76dec, 0x329c3a10, 0x1667a4c9,
-	0x18ed1a36, 0xf50d7fb0, 0xf58c1bc5, 0x11333662, 0x7af149f5, 0x340bf333,
-	0xf7fbc33f, 0x7fe12a4d, 0x855eab31, 0xf9a4aaeb, 0x26540b23, 0x157c02a5,
-	0x6f3679bf, 0x4c5fc63e, 0xe3d10fdc, 0x38e24b23, 0x7ef1a5fc, 0x3fef0dd9,
-	0xf7771d69, 0x8b06488d, 0x89c6157f, 0x6d730c58, 0xfbf1fd65, 0x870fe16d,
-	0xfbaf5f57, 0x383469c5, 0xdb826dc4, 0x2f7f811f, 0xeba67c68, 0xd5445beb,
-	0x8ddc17e0, 0x21bf10f5, 0xb2e2d446, 0xee911322, 0x67d5aa5d, 0x14f7a18a,
-	0xb4edf7b7, 0xde80eab8, 0x0679373f, 0x4ec81389, 0xed2165c8, 0xd2f26e7e,
-	0xade14ef3, 0x995bb462, 0x3b45c814, 0xe218d614, 0x07e35953, 0x8b91ca31,
-	0x833b66f1, 0x6fe81475, 0x9fa0f841, 0xdb92f655, 0xbbc62e58, 0xbfa1de41,
-	0x87851cc7, 0x94dba805, 0x59fd8656, 0x7cf18c92, 0xaf58d39b, 0x1d207fc2,
-	0x3f8a3046, 0xc2908f45, 0xa86018f0, 0xe32eed0f, 0x84e851f3, 0x201fdd91,
-	0x8b10763e, 0x02556943, 0x26cf8c22, 0xfe7d9d49, 0x7bfa2656, 0x2f8a7e1c,
-	0x2ae5fb40, 0xc5a95f6f, 0x507f97cf, 0x12ee3830, 0x3ceaa8fa, 0x21419068,
-	0x7fbe3d75, 0x71fe625e, 0x3a6f41df, 0xd10d5561, 0xde4d739b, 0xd40f4869,
-	0x009f0893, 0x760d78e3, 0x2a1a9a60, 0xf8c20be7, 0x88e1aae3, 0x5dfd0667,
-	0x2ddef26e, 0xe387f426, 0xea4ffbaa, 0x4882ffd7, 0xfeeabcf3, 0xbfebf587,
-	0x15ff5232, 0x977979bf, 0xf4a9f80f, 0x803a4f57, 0x5267d999, 0xe80ba253,
-	0xc1b5be5e, 0xa9f97281, 0x5d2073e4, 0xd38bf33f, 0x16e7c923, 0xb74f9751,
-	0xff11e422, 0x7e9d1f10, 0xd03bd1e9, 0xd5b73aae, 0x607c52ac, 0x0160259b,
-	0x5d6caca6, 0x9b63e5c2, 0xafaf18e5, 0xb3f902fe, 0x2fa8cdaa, 0x32785f4a,
-	0x40cde311, 0x0e7fcd49, 0xb9507f90, 0x68852fe5, 0x5eb15577, 0xdfe17bd2,
-	0xe3e7f8e1, 0x2f981ec8, 0xaf7ff4c7, 0x6955f3ef, 0x7d6aa978, 0x84910bf4,
-	0xcdfc83a5, 0x9a25f6f0, 0x68a4ffbd, 0xdf38a78f, 0xf9113644, 0xf307c74c,
-	0xeebf7b73, 0x8f73a7c5, 0x5b9d3c01, 0xe421ddfe, 0xd727f284, 0x165a677b,
-	0xe735fcfe, 0x0dd4f2c0, 0xaed4317a, 0x6767d7d6, 0xeca7e69b, 0x39b965e1,
-	0xb03f40e0, 0xe5d9b37c, 0xfcbeba43, 0xc19e2ffc, 0x1607ccb8, 0xbfe870d7,
-	0xef83e5ec, 0xb2f500dd, 0xdbf8e61d, 0x211434f8, 0x2a974831, 0x6c62bbf8,
-	0xbfa50e90, 0x473b283e, 0x8e3fe7f1, 0x6ca3d20b, 0x8d993ec7, 0x298f8fea,
-	0x0ee4fb2d, 0x5a5d0225, 0x3fa2158e, 0x57e2f751, 0xcfafea32, 0xe0d8175e,
-	0xdcf8088c, 0x62ec907c, 0x51d113c4, 0xdd1f53a3, 0x0157dac2, 0xeabf505d,
-	0xff7f0a74, 0xc7fe9a2f, 0xc4399cfe, 0x86bcafcf, 0xb67f28fb, 0x25fe70b8,
-	0xc0e83caf, 0xaa929c79, 0xdb3f5f39, 0x7186e890, 0x44becc4b, 0xbcfe4a95,
-	0x121fb9e4, 0xf23e2dbf, 0x7f8a44c3, 0x89b27730, 0x325f056c, 0xa6d16fce,
-	0x62bf34d9, 0x2bbe25e6, 0xe0f45679, 0x8959e0fe, 0x4111df4d, 0xae24522e,
-	0x5b354f8f, 0xa7654d70, 0x7dc0e170, 0xff45b785, 0x2dff8a56, 0x0fcaf8a5,
-	0xb620fdf5, 0xad67ea8c, 0x885f4e9c, 0xac1abefa, 0xbafca13c, 0xd23b7565,
-	0xf710f4e7, 0x571b8c60, 0xe1a7c931, 0xfd08b843, 0x0da6478a, 0x4e61f4e6,
-	0x0efb4f29, 0x7c14fdf4, 0xcddbed8e, 0xe1ae5b6e, 0x2331763b, 0x6d72fe38,
-	0x0a3b807c, 0x8953d5ed, 0x9845ff60, 0xafa4a15f, 0x85576037, 0x7c8857f0,
-	0xf2df7973, 0x5d6f9708, 0xa633fdde, 0xbebffbe3, 0xbf07e5c3, 0xe0057b43,
-	0xf7a60c0a, 0xa40966fb, 0x102c2c0f, 0x98b7ae49, 0xbe36b935, 0xe004f9d7,
-	0xeddd7096, 0x3fec17e3, 0x764ff08e, 0xf87af16c, 0x565f442e, 0xfe8e78e1,
-	0xbb72e9fd, 0x04ff9358, 0x6cff28c9, 0x81fb9713, 0x8f1f09fd, 0xbffd984b,
-	0x15e50678, 0xaff713e4, 0x7b365fcb, 0x6f9fde70, 0xbddef03f, 0xb79fa720,
-	0xd46a72e8, 0x5a72e19f, 0x8b0273b2, 0x639fa724, 0x3924421a, 0xe511e785,
-	0x3e20e954, 0x4fe947fe, 0x85377f1d, 0x87d74fe1, 0x5c31e103, 0x7459fe1f,
-	0xf087d446, 0xd7961de7, 0xbe74ff9f, 0xf4adf9d3, 0x29431597, 0xa5f3a63e,
-	0x7c7d77ce, 0xbf5df3a9, 0x7f01a378, 0x182defe1, 0x3cb80183, 0x4714cdbb,
-	0xf7c3df28, 0x43bbe17f, 0x4f09e3a9, 0x58c65a6e, 0xf8d4a1d3, 0xac3fbad0,
-	0xded612de, 0x84f7561d, 0xd586f7b5, 0xcbed0dab, 0x3cc80edb, 0x686025af,
-	0x8678ae27, 0x1228327d, 0x5fb9fabf, 0xec85fada, 0x7a50be43, 0x4af37be9,
-	0x3c63b3e6, 0xf148af7c, 0xf1c01e91, 0x67a7182a, 0xf31f867b, 0x3c6c1a24,
-	0xf6a3d4ee, 0x6c5ed03a, 0xdef5e588, 0xea157904, 0xaf79fd3d, 0x7af5c78d,
-	0xd88ebd3c, 0xd8edfb10, 0x76f4911e, 0x8f4d9f87, 0x8ac267e4, 0xc1d47242,
-	0xe3cf7a06, 0x2544d3fd, 0x5fc6057d, 0x8617449a, 0xef6a8a74, 0x419e6071,
-	0x3bac9ecf, 0x45f3c0e7, 0x8db48a6f, 0x7b7683d8, 0x2dc7920c, 0x77f88725,
-	0x53df329f, 0xbf7e3193, 0x4579fb87, 0x11ecc36b, 0xa9f896b6, 0xa32e5958,
-	0xecbf053e, 0x82ff71b8, 0xd6a945cb, 0xe326c95f, 0xdc7bfd7b, 0xbdfb45c1,
-	0xbdf18b74, 0x34078b57, 0x863272eb, 0x71fcd18d, 0xf4d28f1e, 0xe73134f2,
-	0x8f4039ce, 0xc322c39e, 0x7b33fbfd, 0x99c7a244, 0x9ebf7ced, 0x23d7f6e2,
-	0x3e92f77f, 0x89d4f1d4, 0xac0f24f2, 0xfd5f3aaf, 0x9187bcaf, 0x987d766f,
-	0x3b2833fb, 0xfd907d77, 0xe6ffac5b, 0x590ff4fd, 0x5e53f6ff, 0x493ed1b7,
-	0xe276ebcf, 0x7fbd9ef7, 0xeb187f4c, 0x9f142dbb, 0xabfd79ee, 0x9e9fe45c,
-	0xd4129695, 0x80433d77, 0xec1f68fe, 0x83b72afd, 0xa27ad7d6, 0x99251fdb,
-	0xfe7b47db, 0x8f10b1f6, 0xed0acc25, 0x49a3d786, 0xb35eaa9e, 0x67ad3c51,
-	0xa17957ef, 0x9d77ff76, 0x7fb6a54f, 0x736763d9, 0xb17c2276, 0xeaa7df7c,
-	0x5f3fd7b7, 0xad17f98b, 0xf085e4fb, 0xbeefca7e, 0xda3d45c9, 0x43db93b3,
-	0xe78ee6dd, 0x68ee7f70, 0x6695dcfd, 0x0a3773c0, 0x9bac0a55, 0xa014cf0d,
-	0xcbc7f4dc, 0xbc271437, 0xfcf47c52, 0xc10f835f, 0xdd9df5cd, 0xde70156f,
-	0x21fc7f5f, 0x2dd785ea, 0x7cfa97c4, 0x25a96f3f, 0xf372e57b, 0x9c799876,
-	0x799dffe4, 0x992b810b, 0x3ff328f7, 0x2d7fbd37, 0xe12e8939, 0xcf9fd072,
-	0xf5443ef7, 0x822eed97, 0xfdf90af7, 0xf9f27ff6, 0xefba6b7f, 0x2e3bba04,
-	0x7ff2ef3f, 0x4c0f79f2, 0xd7ef37f7, 0x7e62aee8, 0xbeefd54b, 0xadbef821,
-	0x4ffb5b9e, 0xcd03ef2e, 0xd7ebb75f, 0x994d5c98, 0xaf439f18, 0xc569d601,
-	0xc311b33e, 0xcc466b85, 0x14ced154, 0xf52bf6c3, 0xfb99af72, 0x5bee224d,
-	0x086f9c62, 0xcd31f38f, 0x3d2da28f, 0x8a525a18, 0x94958ec9, 0x96bedc55,
-	0xc06eed5c, 0x176b9acb, 0x887728b8, 0xc5ea3d8d, 0x1764da7a, 0xfcc3afc5,
-	0xb9817ac9, 0xa56fb005, 0x8c396f6b, 0x84798dfe, 0xa5c96029, 0xab9618f2,
-	0x59a4b8b5, 0x8f7e0d95, 0xdbac6392, 0x45bac69c, 0x38cacfeb, 0xe624d6fc,
-	0x38b4f8c7, 0x798abf72, 0x8918e26d, 0xb1b75009, 0x17fa1f26, 0xf7e32496,
-	0x1ec0311b, 0x5abdcf12, 0xe1f6f63c, 0x1bbb6c71, 0x44d238f1, 0x2e4a6b71,
-	0xfcb8bc25, 0x8d9e786b, 0x55d788d5, 0x094f88ed, 0x7f6e5ffd, 0x34ccdf91,
-	0xbad2597f, 0xdc984690, 0xcd3b6336, 0x9d2cbe4f, 0xcbd25d38, 0x332d3a35,
-	0x43a745d0, 0xe818fa04, 0xdbf9e3a2, 0x2e9c27d2, 0x6fdff8e1, 0x07fe1276,
-	0x974e97a2, 0x50cdc534, 0xbf9acd5e, 0x49fd1530, 0x1879a7ac, 0xfe6b33ed,
-	0x66ef1482, 0xea93a43e, 0xf42f4862, 0xb7e002db, 0xf3fb7efd, 0x7aea2714,
-	0x081dd8e9, 0x456fd94f, 0x75fc0566, 0x00b3b76f, 0x65f92f7e, 0x5b4b43f4,
-	0x33fb8a45, 0x57779029, 0x6eafbec8, 0xcafd97f7, 0xdd29f34e, 0x06dff169,
-	0xfaee97df, 0xb0ec9724, 0xd7e4bd95, 0x38125ef8, 0xb91d7ddd, 0x2a5bafb8,
-	0x9c23ff71, 0x9e65625f, 0x3bb9d027, 0x6dc60e7a, 0xdf3c6d84, 0x1ee5b4b6,
-	0x7f90c5b3, 0x91dbd666, 0x28bdf05e, 0xc213be50, 0xa9e79a17, 0x2f9d1dfb,
-	0x36be1c0a, 0x76f31fb3, 0xe8edb74b, 0xe953f8c6, 0xc30b8b51, 0xbedb55d2,
-	0x298dfda0, 0xd1d97abf, 0x68b6fe41, 0xf3f43f88, 0xc489b7fb, 0x15ad951f,
-	0x9d4087e4, 0x25b2a2f8, 0x72ebfc72, 0xafd969fe, 0x01f2eef6, 0xfd7ecb0a,
-	0x5be30382, 0x3ab7dba7, 0x76dfffc8, 0x3f5bb8e9, 0x91e5bf3f, 0xa7f9fa4b,
-	0xbfe01ff1, 0xc58720dc, 0x220db649, 0xcbe0047f, 0xadef948b, 0xcbd95bf3,
-	0x38c39f67, 0xcfcee774, 0xcb78439f, 0xe7cbfbff, 0xaf609fd0, 0x88add4db,
-	0xa5de9797, 0xddfe9e38, 0x9dc7992c, 0x817c5fbb, 0x1fdd9fe2, 0x7f01df80,
-	0x4a9ef7ba, 0x7bb27f47, 0x1889d7c7, 0x77be592f, 0xef9c60da, 0x0ca757f2,
-	0x88f41166, 0xfadf225e, 0x1afe20af, 0xad03af4e, 0xe9efc807, 0xdfa37a02,
-	0x69b717d9, 0x3071e0a9, 0xd9af16a7, 0xddce391e, 0x7ad33e2f, 0x8d379dd7,
-	0x72ecd2c7, 0xd3882bb2, 0x1c7403bc, 0xdbf4057d, 0x7fe688fe, 0x175fa646,
-	0xb4e803fe, 0x677e8c2c, 0xfcfd175b, 0x3ad77c19, 0x4d38c068, 0xa6f00ae0,
-	0x27bfd1c7, 0xa3227fbb, 0x25fced7c, 0x6e90c5c5, 0xbb44c1b7, 0x8e9b3e5f,
-	0x9a9f0ffb, 0xe7e7ef7b, 0xc62a2c32, 0xbef74a1b, 0xfdd3f24f, 0x538a11ea,
-	0xdd9e2d33, 0xf0fefacd, 0x5396a3f8, 0xcec5b559, 0xfe1a3be3, 0x74e3fe31,
-	0xce2d73d0, 0x8f58f9c3, 0xf7140cff, 0xde799569, 0xafdf1e88, 0x16a1f2d8,
-	0x4bd2094f, 0x3a748498, 0x08fdc976, 0xe22a0f1d, 0x1c686261, 0xad7c7233,
-	0xd1adde2f, 0xf187e90b, 0x2538becb, 0x6e30d3d4, 0x67de17e5, 0xf741f411,
-	0xecff1e66, 0xa3ce4736, 0xbf9ae3d2, 0xff53970a, 0x2f33c595, 0xc5b7ff07,
-	0x52765f8f, 0xea78e1bf, 0x8f5910bc, 0x75f32dbf, 0xc5f7aaff, 0xbe4305ca,
-	0x7bc9b941, 0xa2b1f904, 0xcfcc98f5, 0x52f3f0a5, 0xb53b7cfa, 0x97ced1bc,
-	0xad778a44, 0x7a40396a, 0xe85f5c3c, 0xf0e1a6fb, 0xade0d09e, 0x44ebe36c,
-	0x5fbb4ee7, 0xf73a7e81, 0xae7e26ef, 0xe28c7edc, 0xfdb6876d, 0x5908ee5a,
-	0xf09d7157, 0xf9dfc087, 0x1e5cbeca, 0xec79e5b7, 0xd19ce3e1, 0x9ed561f4,
-	0x6d54e3c8, 0x4e30c2ff, 0xe645af99, 0xc7a5fdeb, 0xefb92d3b, 0xb74efec1,
-	0x79e6199b, 0xa7116e9e, 0xf5173a47, 0xea6eb6ae, 0xbd707ee7, 0x23fd7ca4,
-	0xf8cc5cfc, 0x1f28a3b7, 0xe991f97e, 0x63c4c61f, 0xfe878409, 0x9f396b5a,
-	0x9dc4feb6, 0x3d6ef48a, 0xeb88af72, 0x6fc42ed4, 0xf79f9d88, 0x3b14f54e,
-	0x8fbc85e8, 0x5d91e33c, 0xc4cdf5c3, 0xfc0326a3, 0x5c60ce30, 0x1fa1ea07,
-	0xf982a73c, 0xe88f086e, 0xf08e9c28, 0xb549aa88, 0x61e7fd09, 0x5e743c56,
-	0xacd7ef40, 0xb003cf1a, 0xd89ce30b, 0x1e4cd24f, 0x8bbe4c47, 0x3cfd3e97,
-	0xbf94714e, 0xa059e60e, 0xf02cd378, 0x7d7d927d, 0xe78641c6, 0xde5126bf,
-	0x78c59676, 0x554bac6e, 0xdfd0267c, 0x596ce4cf, 0xf949d937, 0x4258d707,
-	0x20580ff3, 0x6f51f917, 0x587defd7, 0x7e1a427e, 0x1a88fd02, 0x7e5a597c,
-	0x21d610c2, 0xc9bd7da0, 0x0e27cfce, 0xf84de255, 0xbd9af3fd, 0xec3f9fa9,
-	0xec315e77, 0xcee5e29c, 0xc94fc627, 0x05d43a5f, 0xcf7ab4fc, 0x8f5fcc14,
-	0x477f27bf, 0x12798aaa, 0xe7829e7f, 0xc85fe257, 0xf50c931f, 0x9c1fab13,
-	0xc8fff54a, 0xf50e931f, 0x8dff1a6f, 0xca04cbd7, 0x3d582d57, 0xebf22a7a,
-	0x2cf9cb55, 0xce5188c0, 0x75bc40ef, 0x7bba3e79, 0x1ff31391, 0x5f8e657a,
-	0x4376c1e6, 0xa5bc7126, 0x40ed1f29, 0x75350d3c, 0xfe7f22d4, 0xb157ef7c,
-	0x4c9c17a8, 0xaca8fc25, 0xc1fa455e, 0x2f1749a3, 0x9e174791, 0x93eba64f,
-	0x01f78acd, 0xf991e384, 0xe05ce823, 0xad332533, 0x98cf5f3c, 0x78d4c0c7,
-	0x469167a2, 0x1ad3844f, 0x58bf8f92, 0x5cfcc9f4, 0xafa6934c, 0x9e38aaa6,
-	0x2f172be0, 0xe1edf75e, 0x4be7507a, 0xc8695ced, 0x1087c679, 0x7de29f5e,
-	0xffd092c8, 0x161de33c, 0x9f7c0acf, 0x1d3e7c5c, 0x9f3f5bf9, 0x91ce7e18,
-	0x48a6bd49, 0x76b35ff6, 0x782071ce, 0x2aef563d, 0x77f3371c, 0x41879dce,
-	0xc91746be, 0x1ccd4c2e, 0x827c62bd, 0x5215cfc4, 0x4695439e, 0x971324bf,
-	0xa310f643, 0x8b1ed67d, 0xb9bf46e0, 0xf49541e7, 0x6dd15a77, 0x44f557e4,
-	0x3e60b467, 0xfcc3cf50, 0x4c66295c, 0xd90d1ca3, 0xbf401313, 0x5ce0e40f,
-	0x339c1c98, 0x71c673ae, 0xdb3a2e7b, 0x553fa83a, 0xb00c0feb, 0xe0b9e0c4,
-	0xe5eb911e, 0xc1271a9e, 0xf6f98431, 0xa57efae1, 0x18b56de3, 0xde02fdcf,
-	0xe8bc405f, 0xc0e5ff78, 0xa3457bf4, 0xe8912bdf, 0x74fe7e17, 0x6bfbc5be,
-	0xf8aa7f6c, 0x15742ad0, 0x869dcfc3, 0x6a4ab5d3, 0x78ae88da, 0x682f9ee2,
-	0x36e9d19d, 0x412b857a, 0xe3a0641a, 0xe8efd8eb, 0x10985f3d, 0x4f7e9d5e,
-	0xfdef900f, 0xcf5f0b07, 0x9c4bc7c2, 0x8de291d3, 0x1060feb4, 0xcf58212e,
-	0xf8d1e6b5, 0xde3c4d83, 0x10bdbfd3, 0x7fd03e71, 0x30f2a5e6, 0x2fde5573,
-	0x50fdffe0, 0xf110ffbe, 0xfe22223f, 0x03bc463f, 0xf6c63ffe, 0x4fff8057,
-	0xdd7f852e, 0xf4d32fae, 0x2bee1942, 0xc5fcff01, 0x13313339, 0x15142dc6,
-	0x5b25ffe2, 0xd21f6d45, 0x62725b7d, 0xb92c8f50, 0x199f7abe, 0xb3c970f8,
-	0x9169f102, 0x73fd5e76, 0x784b5ced, 0x1cf15f5e, 0xcbc9e91f, 0x49f9f7e7,
-	0x336d950f, 0xe410bf3e, 0xc7ca74db, 0x93f3f1f5, 0xe11726a2, 0x68a33ff8,
-	0xd628a2fa, 0x0e9c2ed0, 0x864daa43, 0x29e4f03c, 0x9f90fd7d, 0xbe726497,
-	0x3fb5f14f, 0x07c61998, 0xf8fc52dc, 0xbc63e200, 0xcdfb1530, 0xef56e4d7,
-	0xe30ae86f, 0x33e19f3a, 0x6acbfb9e, 0x1bfb9e34, 0x686294de, 0x4c86cd7f,
-	0xfe91fbc3, 0xafef0d6b, 0x50d636db, 0x8372d51f, 0xb6e8fda1, 0x4c7d4302,
-	0xfb4316e0, 0x1a678771, 0xefda13ea, 0x789fb435, 0xfde18174, 0x86a51df5,
-	0xba7e37f7, 0xa9bf50cc, 0xed0d5ff7, 0x5eb88b03, 0x94935fdc, 0x740ae786,
-	0x2a5fecbc, 0xbe7c549b, 0xe6a4db34, 0x744f3e86, 0xccb1733b, 0x357fa373,
-	0xb14cbc90, 0xae85a726, 0x6cccf9cf, 0xac536bd0, 0x55817ac6, 0xe07497e3,
-	0xcdfe2017, 0xa55ca356, 0x026bcf56, 0x2ca59bb3, 0xd2f94619, 0x58b75f20,
-	0xc5bb7eb9, 0xedfa657a, 0xaa7f6c4e, 0xece74032, 0x444be5c3, 0xd2a2caf9,
-	0xcca9fb47, 0x1b96f945, 0x4d3e466d, 0xccaf401a, 0xc3cf1ab3, 0x9b61ea8b,
-	0xfd139064, 0xd0a8f9f9, 0xdbe2c2e7, 0xa0676f28, 0x05a4e57e, 0x7d016eb7,
-	0xa97b2729, 0x9aaf9fd4, 0x97988a63, 0x3bf590f7, 0xfa1b49fa, 0x210f4fd9,
-	0xde92bb7e, 0xccf30a7e, 0x92f5e72a, 0x316c94bf, 0x775825e2, 0x5479e60d,
-	0x508e7e4e, 0x54dcffe5, 0xae2b78d3, 0x173cfaf7, 0x1133307d, 0x06d203f3,
-	0xd55e9ff0, 0x4d5cf1e6, 0xc345adc9, 0x14d53fb0, 0x7a45bf7a, 0xfd10aaa0,
-	0x1e5aa198, 0xc8a653f4, 0xd53f4af9, 0x0a8c19fa, 0x5503ed14, 0xaba0fb21,
-	0x048723f8, 0x9377f8f3, 0x17c8a7f7, 0xe7b7460b, 0x6ecb73f1, 0xabb24cd7,
-	0xd75f8254, 0xe78ae943, 0xe92bd429, 0x66731249, 0xf06787f4, 0x06636f3c,
-	0x338fafbc, 0xf7aa14b9, 0xe59e380a, 0x820d8cc7, 0x5bffeaf1, 0xf7eaf824,
-	0x3cf94f5f, 0xe29aa516, 0x993cfaa7, 0xc7afdfb6, 0xcd26cf8b, 0xd63c418a,
-	0x6e77db5f, 0xacfd6187, 0x7ec76de2, 0xd337aecf, 0x8205f5b8, 0x6f3ebde1,
-	0x741dc369, 0xe15d2b1e, 0x79862ef3, 0x3496dc23, 0x73fd570e, 0xb8234b02,
-	0x43d2f7fe, 0x8aecbfe8, 0x0dbc6176, 0xe889b1f0, 0x6738ceed, 0xf30f27d2,
-	0x34a418aa, 0x25fb21af, 0x96fa1fb2, 0x4cdbaf95, 0xf688959d, 0x4635f254,
-	0x66f5c5b8, 0xc51707f2, 0xe0af942a, 0xd1a159af, 0x55ef38d5, 0x9cef3349,
-	0xbdd4f00b, 0xfd4c3223, 0x2d347671, 0x15df043d, 0xfcbb46b7, 0xef78fece,
-	0x01387272, 0x6e10b7ee, 0xcd214371, 0xdc21da9b, 0x33d8173f, 0xde77c819,
-	0x14ff44e9, 0x977dc313, 0xd3fff870, 0xefc4e3ca, 0x879a5558, 0xeb7c549c,
-	0x16584196, 0xb51ddc91, 0x7fceb80e, 0xfcebe568, 0xeb08d687, 0xfdeee5fc,
-	0x7ed39f28, 0x6dd14b08, 0xeadaecd2, 0x197b50ec, 0xec49d6f4, 0x318baf57,
-	0x7ec5ce3f, 0x3ccbb607, 0x9719d94d, 0x1ed0cbb7, 0xedd3fe43, 0x8d5abfb1,
-	0x9e886476, 0xb3d34afd, 0x9ea15d5f, 0x4eed80bd, 0x68881bdd, 0x91c824c7,
-	0x1b38dcf5, 0x2a957fc7, 0x1be3ca33, 0x6d9f9e20, 0x0e1f6c8b, 0xce5d0eb4,
-	0xd68cc8cf, 0xefd754f9, 0xc560dfdc, 0x9c2fed32, 0x247fe0d9, 0xe329f71b,
-	0xedde5187, 0xaea4fd40, 0xf10d83f8, 0x886de3ab, 0xc04f88cd, 0xf9c6d3a3,
-	0x648b69c4, 0x1e03960f, 0x0e3c064d, 0xd903f6c7, 0xdfad5783, 0x6ee78c4b,
-	0x837c35ba, 0xbc71979e, 0xce3ebbae, 0xe545b8c3, 0xe7a473ec, 0x399c7aaf,
-	0xf74475c6, 0x011c61bf, 0xd77ddfe7, 0xb7716b7f, 0xd5178a0e, 0x0c4d7abd,
-	0x0a2aa7c6, 0x9586f4fa, 0xa49985db, 0x5976bb07, 0x576708dc, 0xece7cf1c,
-	0x10f135da, 0xaf3e39c6, 0x85299c39, 0xaf5d2dd8, 0x4333c91c, 0x8f3b5d7f,
-	0x209449e4, 0xd17e27e7, 0xfc5c57df, 0x128f3ccf, 0xc7d0273c, 0x0ebe566f,
-	0xf8f1b7ad, 0xc798d3c9, 0xf7b19a36, 0xfaf963a3, 0x1c7a6891, 0xe3bf479f,
-	0x7f7ea1f3, 0xc7e57054, 0xdd262b00, 0xab664c55, 0x00a68de5, 0x6e0a8f96,
-	0xbe55e311, 0x4d3cfc91, 0x911b1652, 0x4728fd01, 0x8e0803db, 0x8dd7a3a3,
-	0xa7ea29db, 0x0b2c3eea, 0xc402ef14, 0x2baf5c7b, 0x37fc7d09, 0xa1b38d87,
-	0xe14d215f, 0x7e77b77a, 0x29ef1f94, 0x8fb9344a, 0x6767aa80, 0xc58c2f0e,
-	0xe68b7ff7, 0xd258f2f2, 0x8e5c2689, 0x38a03970, 0x5a669bd4, 0x710d96df,
-	0xef822f27, 0xe7884d97, 0x9805e97e, 0x9639c87d, 0x0967e3c7, 0x00b90714,
-	0x14e78178, 0xb53e02fa, 0x3317cc4b, 0x89b0f416, 0x0bf055b9, 0xee4293ec,
-	0x68ffc1d9, 0x4d60fc76, 0x4d38f6ff, 0x45e0333e, 0xd5db1976, 0x5c0cee09,
-	0xfc81774f, 0xb4fa030d, 0x7ca958d5, 0x184d46ad, 0xa7b8f206, 0xafea8926,
-	0x0ca938d7, 0xe7a08cd4, 0x545c6bfb, 0xa7b5368f, 0x552c7ad3, 0xfe879baf,
-	0x0b12fdf5, 0xbc23b7bd, 0x8e567bc4, 0x97f9c887, 0x0093e62e, 0x3d352fae,
-	0x38d6fb52, 0xc6a7afe2, 0xfd31d400, 0x8ad9ffbf, 0x054d643f, 0xa3fa983d,
-	0x415359c3, 0x78129f8e, 0x181e02fe, 0x552e748e, 0xb7329f2f, 0xf0a9a2c4,
-	0x4df31b6b, 0xc8bcc24d, 0x8e153fde, 0xe8f6cc61, 0x1d4ea69f, 0xfdc7f309,
-	0xf6c614fe, 0xc7abdeda, 0xfba9d873, 0x818bab3f, 0xfc6dc8f9, 0x82899f3e,
-	0x7d4056a7, 0x0bf39b33, 0x98b53c93, 0x3773d9cf, 0xbefee273, 0x1b5ece3e,
-	0xdb7613b7, 0x51399db8, 0xe6c1fce0, 0x411e5aca, 0xbae86e6f, 0xef3ede11,
-	0x8f74d7c0, 0x2fb78c0f, 0x2f5e30d5, 0xfa0711c5, 0xd7ff752e, 0xe95c8eb4,
-	0x491f3d77, 0xc4847cfc, 0xe6ba2bf3, 0xfda66e26, 0xba1f6878, 0x4723da8f,
-	0xd2ded7b6, 0xed0681d6, 0x659fb7be, 0xa68372f0, 0xf5c62457, 0x05d16bff,
-	0x61b947bf, 0x5fda38de, 0x09e2d3aa, 0xe57a3a93, 0x2f7e76f9, 0x13d43e5c,
-	0x3c04784e, 0xd1a5d70f, 0x1e605533, 0x6048ffcc, 0x28028433, 0xdbcf36dd,
-	0xc2d24fd8, 0xd197be4d, 0x7165d85e, 0xe3a3d9a2, 0xd903eeab, 0x6121fa8a,
-	0x8fda31cf, 0x643a13aa, 0x8f97f7a4, 0xcb714d7c, 0x3275733a, 0x1b176dd5,
-	0xbdb4feb0, 0x99d6237a, 0x6fa9ebef, 0xd60c3f00, 0x13e3e1ce, 0x90bb63d4,
-	0x3b5829e8, 0x7e06ef57, 0xf5e665d8, 0x4b391f2f, 0x5ccbb1fc, 0xe18d9f3d,
-	0xef987af5, 0xaa6f58ae, 0x52905409, 0xe1fd65fb, 0xb7aeb09b, 0x77da92ff,
-	0x3f6e54db, 0xa40cde2a, 0x855d5f7f, 0x2ea43dba, 0xf2b33af1, 0xc55f9f52,
-	0x7f29af81, 0xe70f72b8, 0xce1bc447, 0xc3cdef13, 0x7a8ce975, 0xa4eb51d4,
-	0xd73673b8, 0x9f0301d7, 0xb753e7e9, 0x2a2cbc98, 0x085ecf44, 0xce42ff5b,
-	0x84a8b1d9, 0x38b4fe90, 0xbb033a76, 0x6f182b34, 0x2a2e64cd, 0x950f3187,
-	0xee96dbd9, 0xbb2db447, 0x7a89d5af, 0xfad73e2b, 0x68e89780, 0xd09e1ff4,
-	0xe8fae2f4, 0x01a31bfc, 0x7782f59e, 0xf17a888d, 0xe74ab365, 0xb2243a2f,
-	0x35b53b37, 0x5330ad8c, 0xf73b5cbd, 0x5de95e6d, 0xeef51233, 0x19ab9322,
-	0x4f0cb3d7, 0x2fbe19be, 0xaae19ddb, 0xe7bcc165, 0xc496d8b2, 0xef304ab1,
-	0xaa3faf59, 0xb546d9f1, 0xd2f786c9, 0x9543fbe8, 0x71d2eb6d, 0x7db3fb7f,
-	0xbd3c901f, 0x7c41951f, 0x447ad15c, 0xbf69daf6, 0x29f3c64c, 0xd6fad99f,
-	0xbef75a3f, 0x0b74196c, 0xeb2ff5ea, 0x79b8744d, 0x06f43d20, 0x38373fe8,
-	0xac6a87c8, 0x5dc2fe54, 0xde9a2d7d, 0xd3295105, 0xbfb4606c, 0x9156e990,
-	0xb9ade68f, 0x7c0ac1a6, 0x8eac82f4, 0x179b3e44, 0x5b7c4b95, 0xbe722b16,
-	0xdd07b964, 0x0dcfb692, 0x6535d4f5, 0x3c53bed3, 0x6f68c8be, 0x88526d54,
-	0xc80ec00f, 0xdca83e47, 0x7ee1f260, 0x4edac9a2, 0x45e77de7, 0x368fcd31,
-	0xaf5c4f9e, 0x6cdf3be9, 0xdcbddf1e, 0xf392c539, 0x511e7451, 0xe51fbfaf,
-	0x9128be24, 0x55ffb47c, 0xe741de72, 0x38fbbf18, 0xc879c356, 0x0428e3fe,
-	0x794e3e87, 0x57d21c70, 0x27ec1fe5, 0x6b8df83f, 0x4dd67b75, 0x3be5ac71,
-	0x9b05fcb4, 0xf3f6307b, 0x1827a6b4, 0x7780b1fa, 0xeeafa329, 0x1ccf4093,
-	0xf933d3ec, 0x90d3530d, 0x6cf7c1be, 0xb90f4192, 0xc1d3a025, 0xfbeead28,
-	0x51f6e47e, 0xf533ed61, 0xa986ccfa, 0xf3c3fb93, 0xb7582db4, 0x1be97b42,
-	0xe11d5f4b, 0xa1f573a3, 0xe3e9c5fd, 0xe9fd4bdf, 0xb51a97fc, 0xf80fa0f0,
-	0x27ac60ef, 0x7a7cf31f, 0xca273367, 0x8d4966e1, 0x21d08572, 0x37af8a35,
-	0x35afe725, 0xf7883fe0, 0x4ffd035c, 0xfb0d38d5, 0x968b8b8a, 0x549879d1,
-	0xc7cc5e9d, 0xca6d77cf, 0xfe27ec32, 0x16ae387f, 0x7000f70e, 0xc307fd4c,
-	0x5e30c231, 0x031c8e10, 0x870b577c, 0x7a6b3b18, 0x8f6bda06, 0x280f2898,
-	0x66b3e4d1, 0x6ff65da2, 0x0ca78a26, 0x880f3c67, 0xfb0de329, 0x2c7b99b4,
-	0x9efe31f3, 0xd2c3b129, 0xb7279458, 0xa9d716b3, 0x5f64489f, 0x39ab73c1,
-	0x726e870e, 0x204ffde3, 0x665fd495, 0x1f82b7b9, 0x82fbe6f2, 0x70d33efa,
-	0xbde3e595, 0xe7a39ba0, 0xfb8d18df, 0xaa1e7366, 0xe7983cc2, 0x352ff195,
-	0x92bc8330, 0x2c20d21d, 0xabe33b25, 0x701b87a8, 0x147076bf, 0xf6045bb7,
-	0xe4e1c370, 0xbcb9ef48, 0xf0f35b9e, 0x341b8c34, 0x8b5e74af, 0xcdb353fe,
-	0xf31fb2df, 0xe8531e76, 0x47acd6de, 0x50998dfd, 0x6899d717, 0xfd6314bd,
-	0xdf719adb, 0x176cc9fd, 0x68cd11da, 0x47fb60bf, 0x566bf214, 0xf0d338d5,
-	0x6d3a927e, 0x76b2d81d, 0xc1798ab2, 0x87148af5, 0x732addeb, 0x773c5cf5,
-	0x8dd1ee31, 0x51ebd60d, 0x071ab98f, 0x949ebca9, 0x339aeb8c, 0x7b463ad3,
-	0xae68c80f, 0xb1a8a675, 0x6ff0fac1, 0x3d20fac0, 0x9dc1b1b3, 0x2b2efd86,
-	0x883bfad5, 0xe2178a71, 0xef68bc34, 0xd2f4fb33, 0xcbcc06c6, 0xf5836b12,
-	0xaddf30a9, 0x353d72cf, 0xfb47fa18, 0xc3e3e60b, 0x877b057b, 0xca4e744b,
-	0x603b6306, 0x9991b67e, 0x0cd7dfb4, 0x2bef117a, 0xdfc91dee, 0xf234fbeb,
-	0xd3ed1370, 0x6f5c7b60, 0xbdbcc96c, 0x57df833c, 0x8a15db20, 0x307ac037,
-	0x149ef315, 0xf371ffa6, 0x8fb6a4b8, 0x01f78511, 0x75a3f084, 0xf73a32ed,
-	0xdc661d69, 0x8cd3979f, 0x16798975, 0xaa27bfa0, 0x4637e7c6, 0x8341f96b,
-	0x6dda0a58, 0x133e4dc3, 0xfcc91bb6, 0x02c75e54, 0x628d8f64, 0x8d1f541d,
-	0x1e16635e, 0x41d2725b, 0x2dcc71ab, 0x47aa38f2, 0x71313b44, 0xf2471eae,
-	0x74be414e, 0x61766b47, 0x7e3fef0a, 0xf7ca2cc6, 0xcdef69f5, 0x313d8633,
-	0x7eb5e60d, 0x50ceddc6, 0x2f5f4efb, 0x48adfb75, 0x68cbf983, 0xa0bda221,
-	0x364575db, 0xe5984f5e, 0xc6147a7e, 0x26cddb11, 0x58ad9fbc, 0x6f16638b,
-	0xbb444fc8, 0x5cdf68ac, 0x44d787b2, 0xd16cbb73, 0x77b219fa, 0x9af79e14,
-	0xfe7f764f, 0x183109ba, 0xb9b06fa7, 0xfe47ae62, 0xdfbf23fd, 0xb1ed4af5,
-	0x0a6bc4e6, 0xc19b1e50, 0x8ffbc6af, 0xcadd9a0e, 0x758be418, 0x6ccec8c3,
-	0xc7d6f28e, 0xffcdbf42, 0x41d574ea, 0xf73667fd, 0x4e3823f8, 0x8f7f1443,
-	0x6f2126f7, 0x3ff7edf6, 0x1e8c5c2f, 0xfdf0fc78, 0x91b183fe, 0x43bdf1ef,
-	0xfed05fc3, 0xd9dd90f0, 0xdcc4f660, 0xcbbdf087, 0xead679e7, 0x112f5189,
-	0x86b4fb67, 0xd67603e7, 0xe64058b8, 0xbd62d1f7, 0xdd3f68a4, 0x22d25caf,
-	0x097cdc50, 0x3a3d226b, 0xeed5894c, 0xc5e631a7, 0x4dbd1696, 0x795b4bed,
-	0x42d632fb, 0xe17a75ed, 0x8301b5bd, 0xf0ce3a1d, 0xdcd11dfd, 0x78acdd6f,
-	0xfffb431f, 0xc4d91991, 0x1167c04f, 0x07e22df3, 0x31b977d8, 0x371faf9a,
-	0xf6c8db62, 0xb863f128, 0xe05cb87d, 0xc207b3e7, 0x9379d553, 0xde0a3d61,
-	0x7ad3219f, 0x49f9add4, 0xeb7c9387, 0x7ff9846f, 0x244af59f, 0x23bddaa7,
-	0x425f8275, 0x33befaf9, 0x2d1bdeec, 0xa6ba680f, 0xcb43fe25, 0x6b3ef9ef,
-	0xfd0dc379, 0xf402cedc, 0x9eed61dd, 0x48a41412, 0xafd01979, 0x3adc1f41,
-	0xddbf58c2, 0x39dfac65, 0x7d3df229, 0xb4d46b6b, 0xd6aa7bd0, 0xf38e700e,
-	0x575e8d2d, 0x0b12df7f, 0x0b7bebcf, 0xf9815ee9, 0xc17fb494, 0x1b14faf3,
-	0xd91ea0f3, 0xfb46cfbf, 0xbc8a5521, 0x55164319, 0xbde2efe0, 0x9f9d8af0,
-	0x17ff4037, 0x998a05e3, 0x97de0fb7, 0x1251f7c4, 0x3c5a493c, 0x633495c3,
-	0x1b87b7d4, 0x0bca2afd, 0xdc46d896, 0x27e60d77, 0xe8edef1a, 0x0f38fe8a,
-	0xcf9863fd, 0xe84f8c6c, 0x3e7d5a71, 0x2c7f28ff, 0x39cfbb5a, 0x346b6e9c,
-	0xa30ba8f9, 0x39d23d73, 0xb973df07, 0x87bb52f9, 0x43c129ff, 0x26896879,
-	0xb3ac171e, 0x9c528eb9, 0xea0ff344, 0xf306b8b4, 0x56ef5d7d, 0x1095ecc2,
-	0xed7d22ff, 0x39f5f5d7, 0x38f377e4, 0x156a2d88, 0x360dc3ae, 0xfaa66ebd,
-	0x00a6e6d3, 0x5aaffdf9, 0x831f189c, 0x6718ddef, 0x411dcdf3, 0x065d5d7e,
-	0x0e7bc14b, 0xb4cbb0de, 0x6abdd6fe, 0xd8f5c669, 0xdb76f36d, 0xba49f242,
-	0xf9d1efec, 0xf9fd08a6, 0xf90dfd0c, 0xf8c1fd76, 0xfd7788ad, 0xa7f61bfd,
-	0xceff2202, 0x691bf949, 0xa17b1fed, 0x42cbb89e, 0xf7fd4f71, 0xe7cfca0f,
-	0x7a8cfdd1, 0x4e14137f, 0xd51ace87, 0x8e5d8f90, 0xe507377a, 0x67f49da0,
-	0x8320cb45, 0x69f5d4de, 0x681bf9c5, 0x57482cbf, 0xb5212e2d, 0x38aa5e93,
-	0xbc68bfff, 0x349e903b, 0xf7e9124e, 0x3549c781, 0x38e0e3e8, 0xf7700c93,
-	0xc132671f, 0xdac38fa1, 0x9fe70ca2, 0xae3ccceb, 0x33986672, 0x1e823626,
-	0x83714bd1, 0x60ff70c9, 0x62b2e49d, 0x4eca75ff, 0x287f3435, 0xef005f7c,
-	0xf02164c5, 0x867ac1d5, 0xf30b72c1, 0x3d405e52, 0x072213f6, 0x62a5d9a2,
-	0xf8c262bf, 0xc62ef9e9, 0xbdb945fe, 0x33727d10, 0x8bd82df2, 0x7e3b583f,
-	0x49ec0f95, 0x4769ecc9, 0x93764aba, 0x6b68f313, 0x45c51315, 0x64ac92eb,
-	0xca12adff, 0xbd739455, 0x2243a95f, 0x8f7df438, 0x9f29e681, 0xc33cd077,
-	0x9ffb3bef, 0x76a14f1b, 0x3b57eefd, 0x0f93d730, 0x93545bfd, 0x4e5d450b,
-	0x2127d853, 0x47ef0ff4, 0xec4520da, 0x8e9dbc27, 0x6ce901ff, 0x3d2070ee,
-	0x88a5e3ba, 0x951b1079, 0x310798ef, 0x271f4c2f, 0xe00ecd1c, 0x238742f7,
-	0xe5f48323, 0xa5f50546, 0xdc9fccfd, 0xb4cbd24e, 0x7fafadef, 0x56a984e6,
-	0xbc6c4f9e, 0xfe206f57, 0x7d62f1d3, 0xf3c641f3, 0x7f94bd53, 0x483c3972,
-	0xfb43cb82, 0xe2297600, 0x425836be, 0x4938fc86, 0x354fe631, 0x63e21e48,
-	0x56d54df3, 0x5b4927da, 0x927dc569, 0x063392d5, 0x37ded8fd, 0xf983fec1,
-	0xbe793a35, 0x6bff786a, 0xb4661ef0, 0xc4531573, 0x06a379fb, 0x34baafb0,
-	0x77d9acfa, 0xf501fe69, 0x3775c1e1, 0x71524e2a, 0x399b35dd, 0x4bad03bc,
-	0xe103bf7a, 0xfc7dd1eb, 0x392c1bf7, 0xffae3f56, 0x4a35e3e1, 0xbc3e4f1e,
-	0x7078046f, 0xcd31acdf, 0x546df84d, 0xd5fd1525, 0xcc5111e8, 0x656fea1a,
-	0x67f7a2cc, 0xccf1e3e2, 0x8f8c6b22, 0xe3a3979c, 0x1df2b769, 0x186f1ded,
-	0x8f7f0e5f, 0x7c21e8e2, 0xe84ca9d9, 0x91bb97cf, 0xfc381317, 0x5aa6f7a1,
-	0xbc458633, 0x7f1fb27f, 0xde4df186, 0xf7e74664, 0x19b94306, 0xeed56efa,
-	0xb5c0aa43, 0xf2f4fc0b, 0xc2a6147b, 0xe477e6fa, 0xc939405f, 0xcfcfdf6b,
-	0xf026b4d1, 0xefb51e7b, 0x625dc7c3, 0x12c8fee7, 0xcc654abb, 0xf12ff751,
-	0xdb5a37f7, 0x5e789ca3, 0xb22e35b1, 0xd763931f, 0xb49a68f3, 0xb41d0873,
-	0xcfb7a14f, 0xcddcc79b, 0x1b3dc50a, 0x257fe0ad, 0xa9ffb5f4, 0x82023fb6,
-	0xf9dce30b, 0xf99aebdb, 0x7f3e51f9, 0xfb62ab8c, 0x5c8ec4c4, 0x740efc41,
-	0xf70cc6db, 0x3b5855db, 0xe7ce51b2, 0x7699bc9a, 0x68eaa718, 0x5bd62247,
-	0x4e9d3edf, 0xb71d6f7e, 0x47777b37, 0x3fa0dc53, 0x79f96a7d, 0xcc29f3f2,
-	0xdd3fa837, 0xad00a5ca, 0xd3e7e5ab, 0xcd1c6f99, 0x0b8d67db, 0xc2d3bfbe,
-	0xc8b1a4d8, 0x884f1c00, 0x30f4489f, 0x7a064ddb, 0x675e3c80, 0x7881e8d7,
-	0x76b7a3ea, 0x76a74bef, 0xcd71e0bf, 0xf72a615f, 0xa5fbf5d7, 0xe5f7678e,
-	0x5b7dd05b, 0x13f736e5, 0x3b0b4f78, 0xe6be5222, 0xfefc29c2, 0x771685c4,
-	0x0b57da0c, 0x6a1453ff, 0xf3937f69, 0x7f0d22fd, 0xf745cc9d, 0xdad6f80e,
-	0x984ebef8, 0x54f1967f, 0xc23fb8fe, 0x44da8bf7, 0x305f1bca, 0xbf61f145,
-	0xbf05ed79, 0xe2f9fdc4, 0x773a68c6, 0xae7bf0be, 0x2dd76893, 0xc4e6c27c,
-	0xfe597bdf, 0x327e6641, 0xc9fcbbf4, 0xdf07d50c, 0x24f0af45, 0x27a05d59,
-	0x8853db1f, 0x3083457e, 0x0630be7f, 0x0ec7cafc, 0x98b8c2ac, 0xcf94cdf4,
-	0xf47f506d, 0x615677b1, 0x18b7e9bc, 0xf63b26e7, 0x63b442dd, 0xf4d0425f,
-	0xc1c03ffd, 0x5a4d874b, 0xa9aac4fd, 0x4daff2a0, 0x2a293568, 0x562765fa,
-	0xc4d939e1, 0x1318f738, 0xfd8ef78c, 0x6fec42b3, 0xcea313c1, 0xe7f7806d,
-	0xbec817ed, 0xdf693a00, 0x014f370b, 0xb278bbbb, 0x582d975e, 0x86668f8f,
-	0x3339be38, 0xd9da3e38, 0x8b7c7aad, 0x718cdd45, 0xd505e3f7, 0x3fe82453,
-	0xceaea1c3, 0xc4d8c919, 0x1baaf9f5, 0xc476cfc6, 0x98f18cdd, 0x837dbed6,
-	0x1f18d5f8, 0x03de656b, 0xd37f7866, 0xb66e43e3, 0x07e36202, 0x30a8c679,
-	0x29d641ff, 0xf4dfa7ab, 0x4463e41d, 0x0d59f3bf, 0x939204f6, 0xf4d28843,
-	0xc2defc15, 0xe34ef93e, 0x1f57db7c, 0xc3cfc1d1, 0x5e24f5e8, 0x59195d6f,
-	0xc312dc5f, 0x2a35baf9, 0x4d66fbf2, 0x03be003f, 0x8b6d7f14, 0x08cf0ff6,
-	0x1f900fea, 0xa79224eb, 0x807f5c75, 0x93b4cd1c, 0xefec46dc, 0xab6bcadb,
-	0xab79af76, 0xf8c68ee4, 0x30c7ae82, 0xcce38682, 0xfa0d3bb5, 0x017daf39,
-	0x3151d7e9, 0xc9c7872a, 0xc53093f1, 0xb59847a8, 0xdf743b3d, 0x3cda77fe,
-	0xe3d3ae33, 0x7439013f, 0x8ef969df, 0x9f9e4bfc, 0x7f38c72d, 0x9c1dbd88,
-	0x678a54c7, 0xfa17ebf4, 0xbbfd6a73, 0x5f04ae72, 0x15f065ea, 0xdcbaf84f,
-	0x19fd833c, 0xfbfd2fe3, 0xc17db593, 0x223ae326, 0xa4f38647, 0x7f8027ce,
-	0x2cfe8853, 0x9ea9f4d6, 0x6bbdd107, 0x064fe524, 0x31e7e5c7, 0xc4bfbe81,
-	0x81f25ddf, 0x963d453e, 0xc56fb927, 0x71ed79f6, 0xc0efda2a, 0xbf1af56f,
-	0x3a6fc849, 0xaae35b9d, 0xebbe69f3, 0xfa4bb204, 0x3ada41d9, 0xd024d79a,
-	0x9e0d99ef, 0x87e715e7, 0x7beba7c0, 0xeb55bfe8, 0xe7e73c7f, 0xf9f8fb67,
-	0xcd1f943e, 0x0eae679f, 0x1c3d5fba, 0x732885fe, 0xd5eb2109, 0xeb8a36ab,
-	0x5abb78eb, 0x85edd7fe, 0x25d701f2, 0xf8377d07, 0x84e1c068, 0x1e518b76,
-	0x7cb55f50, 0xb664f742, 0x7f0c89b6, 0x8de700b2, 0xd74f237a, 0x8795be93,
-	0x5bb2240a, 0x49d97a82, 0x37ae8bf6, 0xb06b5603, 0x2bb5b9fd, 0xaf51eb0b,
-	0xc7ecf76a, 0xc7c5a08b, 0x7348e106, 0x9277bb70, 0xddfc4597, 0x5dbb1cb8,
-	0x8f3423d7, 0xe80a2b8d, 0x6d2a855e, 0xe1d49d3d, 0x345378a3, 0x104271e2,
-	0x7d7afa1f, 0x15e3a5a7, 0x8197bced, 0xd83af51f, 0xaca69525, 0x7ef8ff60,
-	0xe7df0866, 0x841f3839, 0xeabbe7d3, 0x0f83c027, 0x0d43f0f1, 0xc75009ef,
-	0x04982d7b, 0xfde617eb, 0x6b5c50cc, 0x56e04232, 0x104e3eb8, 0x5d8f5c4d,
-	0x07e22e46, 0x58f7ed31, 0x41cf24ec, 0xe5bb707c, 0xe7168701, 0x3f29eed5,
-	0xa1390268, 0xcf3e367d, 0xd4c95dee, 0xddad6cef, 0x6f2f4bdf, 0x7496f2d6,
-	0xb5e2b17b, 0xf846cdd4, 0x1cbb7f79, 0x47792f1c, 0x8ed063dd, 0x5c51ee19,
-	0xb5e41fe8, 0xf98fdccf, 0xf07bd924, 0x7c820407, 0xe5c2dd9e, 0xc34bb814,
-	0x43db9bcb, 0xd874adfb, 0xbbfb3975, 0x28fb23cc, 0xcba457e7, 0x5a72217d,
-	0xbe3850e3, 0xc4167e60, 0xa3d464a7, 0x83f7f97a, 0xcf1fb3c3, 0x3e039525,
-	0x78eb6d50, 0xbf996d6b, 0x7c7286d2, 0x8e50b994, 0x9be65bbb, 0x315d2146,
-	0xa219cc11, 0x79f3d61f, 0xf02876e8, 0xe5f20b65, 0x1a10c73a, 0x7751f86f,
-	0x1fbc0e74, 0xc613768e, 0x7eec5b7d, 0x0efc23f4, 0xe2072eef, 0x14ef5673,
-	0x8cad4fdc, 0x85b5aeae, 0xdf6bef3c, 0x8f89ed06, 0x1fee22bd, 0xf8c03f95,
-	0x7cdaf1bd, 0x02cfa9a0, 0x20c855e3, 0x0f5459a7, 0x655ade20, 0x3ef7bede,
-	0x5611a5fa, 0xf97bf229, 0x95befd60, 0x536df3f8, 0xfd17d21c, 0xcb93b424,
-	0xee1a4f45, 0x16c1b27b, 0xe003ae17, 0x1fbf1077, 0x06c931b4, 0x4a1efffd,
-	0xc4d3d3d4, 0x6b8e74a5, 0xfb40965a, 0x8f7fba44, 0xa4fd0b7a, 0x4d17bf3b,
-	0x3c2ec8fc, 0xd3e30c38, 0x4e9cd109, 0xeb558fd0, 0x1b1d6ac7, 0x48ffbf94,
-	0x8efe491f, 0x141dbebe, 0xe0e7ea04, 0xd735d74d, 0xd841f885, 0x83ffea1f,
-	0xa5b48cc2, 0x1f9affc8, 0x7c61f647, 0x7b45dd70, 0xce21ac65, 0xebe0d3e6,
-	0x0a3e4748, 0x3ed147b5, 0x7d67b3ed, 0x0cdf57f3, 0xf4e2767a, 0x715e0096,
-	0x6e8acb5f, 0x6fe817fe, 0x36b3d81a, 0x8d3ec3c0, 0xf8660e2f, 0x3d4fdc44,
-	0xfba05c38, 0x79450fdc, 0xe095aa73, 0x5c5a8938, 0x33cb5120, 0xe5e28c4f,
-	0x1eb8620f, 0xaf863cfc, 0xbca837d7, 0x1c88e89e, 0xbdad9847, 0xeb89a9ff,
-	0x91f935f7, 0x684fd1f3, 0xedaaf5fa, 0xfc211cde, 0x8e13eebe, 0xdd7dda09,
-	0xe3c76f94, 0xfe340bfd, 0xe8873b06, 0xf8abb414, 0x876e9d7e, 0x4d9f6d9e,
-	0xf78213f5, 0x2c047bbd, 0x9f904f3d, 0xf148aef4, 0x6f58e2a1, 0x55a5e622,
-	0xcb8e4544, 0xf4f0d20c, 0x38a30d59, 0xcfdc29ef, 0xb7bfe6cb, 0x1b25f585,
-	0x1d7ba49e, 0xe29f994a, 0x1a1b45bd, 0xc8aebf68, 0x80a7302f, 0xc78799fe,
-	0x943a3581, 0x710d116e, 0xb552c5e7, 0xe4139b1c, 0xae1dfc5b, 0x9b25f7d0,
-	0x57ea19c6, 0x1816976f, 0x7a823bf2, 0xbfec90a7, 0x3e757ef0, 0x8f4fb70f,
-	0xf10d38d7, 0x861b05ee, 0x78cdf217, 0x73217ede, 0x36177cd1, 0x11ef1966,
-	0xb2b84c6e, 0x1ec1827b, 0x538445f5, 0x3fa8fd26, 0xf7f80e3f, 0x17f7c485,
-	0xe08c3a7c, 0x7bc38bf8, 0x8e018c5d, 0xc433e668, 0xdff326cf, 0xf8f1b429,
-	0xef8ff023, 0x7e407652, 0x07f577cc, 0x1fc01dae, 0xfa87fdc8, 0xb9937903,
-	0x024d65fe, 0x9c4ce0e5, 0x66cfb46a, 0x6e75f0c7, 0xc1b44c76, 0x679a2b3e,
-	0x6b57376c, 0x776b5737, 0xa84a38b9, 0xa164265d, 0xe9fde33e, 0x71951fbf,
-	0xffca6dfa, 0xedc310dc, 0x6eaa9fd7, 0xbbf40c6f, 0xd0773b56, 0xefdade6f,
-	0xf735ad4a, 0x5e5285e5, 0x1e6fe6e0, 0x09dfc3ac, 0xf601dde9, 0xfcc1e83f,
-	0x7ba0df67, 0x6eeff4ba, 0xb432d15f, 0xa954f008, 0x8bb973c9, 0x15dcafcf,
-	0x3f418790, 0xae1ce529, 0x827d96b4, 0x5a5df214, 0x22b76f09, 0x2ff06cc6,
-	0xffd5a27f, 0x6549c635, 0x1840495a, 0x3652ed06, 0xec24116d, 0x0b577f0f,
-	0x66a949e0, 0x93dfd0fe, 0xedcf194a, 0x6fc7db9a, 0x04e61616, 0x9a68d0f1,
-	0x5c62a391, 0x85da3135, 0xaa47cceb, 0x50f10eb7, 0xce8051fe, 0xa8fc4c49,
-	0xbdbb425d, 0x23d7755b, 0x7078eb7f, 0xae0a6a8a, 0x711fd1a3, 0xfcfa9b38,
-	0x30bebe62, 0x4766a8f6, 0xe976eb37, 0x42edc661, 0x5712a75a, 0x3efc308e,
-	0xb69c6261, 0xef32244e, 0x37da854e, 0xa327a232, 0xccae24f9, 0x2c76e66e,
-	0x2cb4f7a7, 0x3e7c16cf, 0xb1c8f06d, 0xd647df78, 0xbf8480da, 0x26dafe3b,
-	0x51fbc453, 0xc3fc359a, 0xf9c59e3c, 0x9cb8f3e9, 0x99dbd05e, 0xe84f8807,
-	0x3d3d10f2, 0xd8c1dfb2, 0xff3ef4e3, 0xe97bf8d9, 0x997acafe, 0xc74e4f7e,
-	0x69eab77f, 0xb4a6bc41, 0x3708166c, 0xdc7a78da, 0x5ca39f0e, 0xe78d971e,
-	0xfb94073a, 0x16873b15, 0xbd7dca85, 0x1cd9f44c, 0xdbafe796, 0xe1887ff7,
-	0x5890eaeb, 0x4bc43ecf, 0x8a3adb65, 0xc2d92cef, 0x4067f77f, 0xfe215cfc,
-	0x07ee1284, 0xfbe1cf94, 0x4acff95e, 0x7ab2ff44, 0xe5acfbfe, 0xb8f077db,
-	0x0b998fce, 0xcb7943f5, 0x0728a10e, 0x8773077f, 0x9f0428b0, 0xca7ee5a9,
-	0xaec6bf83, 0x5bd71fcb, 0x718efce1, 0x0e53b462, 0xe87eb8d9, 0xb87c57cc,
-	0xf669dc1f, 0xcebb6396, 0xe61768e4, 0xfff8e977, 0xe99b8efd, 0xa77db5dc,
-	0xa3658025, 0x8ac939a9, 0xcad70efb, 0x6eabe42e, 0xe9127bd5, 0x5a792713,
-	0x78d8fbf1, 0xbe16abbb, 0x58d85a75, 0x3c72b955, 0x8fe30c4c, 0x72e63f89,
-	0xf43aa493, 0x24b186bc, 0xeb9daa37, 0x67d7132d, 0x1e7ccc87, 0xf787193b,
-	0xb3ee3107, 0xe3878724, 0xf294dc68, 0xca1f9d00, 0x70d3bd38, 0x5fc830ce,
-	0x1b7dbfee, 0x2c3fff7e, 0x00284ba1, 0x0000284b, 0x00088b1f, 0x00000000,
-	0x7dd5ff00, 0xc5547c7b, 0xbddcf8f5, 0x0dd90afb, 0xdc3bf79b, 0x24280c10,
-	0x01049e6c, 0x878424d9, 0x28026e20, 0x47796bc8, 0xd2026c92, 0x6dfad0fe,
-	0xe5318316, 0x16d46b6b, 0x882ea945, 0x835ab696, 0xb80d06a2, 0x47d62228,
-	0x2d8aa523, 0x2220a5da, 0xfb1b6484, 0x6fcb56c0, 0xec9999ce, 0x0f0d9bde,
-	0x7cf9fb6b, 0xdcc98fe1, 0xe6739f79, 0x9ce7339c, 0xb5331d99, 0x228ca8cd,
-	0x389aa6a4, 0xfd2d34bc, 0x84e90ee9, 0xf00b9085, 0x8321226f, 0xf121326c,
-	0xbd3ca484, 0x582c524d, 0x1c5a7fbe, 0x052627d6, 0xaed84bbe, 0xa0af9686,
-	0x84225ba9, 0xa0e4258c, 0x31cc7881, 0x2ae8b484, 0xfd68d947, 0x7b488496,
-	0x663b2d13, 0x68db4573, 0x9d63967f, 0xeab4ac07, 0xa33e6398, 0xda4bf68b,
-	0x4264c7e9, 0x121230de, 0x8c1ddb41, 0x6dd3ed60, 0x42229074, 0x07891b26,
-	0x233d1bbf, 0xc1dfda14, 0xbfb083a1, 0xa6eab797, 0xc37b697a, 0x19d8b220,
-	0x9b74ef32, 0x6ca5db0e, 0xe8e921dd, 0x5a48b8f7, 0x513f321e, 0x595b01ef,
-	0xcc67cc26, 0x43844ed4, 0xae3d56dd, 0x1ce8c2a7, 0xb05466b6, 0x8fe868de,
-	0xe6ed7bd6, 0xfa7e8c4f, 0xbd2fc7fd, 0xbf50246f, 0xc1b47255, 0x37df5bfc,
-	0xa9a1c9ce, 0x4932e7e7, 0x613a6420, 0xf0bf36ff, 0xdfa151be, 0x70a6efa7,
-	0x76eaf5a2, 0xa32fd2ef, 0xc5a95769, 0x24268d23, 0x8b6bccf3, 0xdefd2148,
-	0x74112266, 0x5736dd6e, 0xfbce8d91, 0x0e535dcd, 0x58845149, 0x20f9339f,
-	0xc421f015, 0x06b4e19f, 0x3a5225e7, 0x722fce30, 0x10b3fd2a, 0x55ef46b2,
-	0x95ddf099, 0xb7eb4559, 0xccf830c6, 0x42e0cc1f, 0x157bec2c, 0x0b80975f,
-	0x8c0a7f1d, 0xdce5915f, 0x2454fd01, 0x329bd846, 0xaff99e61, 0xebdc2999,
-	0x823d92ec, 0x672b8d56, 0x579d0cf0, 0x79b84e65, 0xe2f1c06d, 0x44f8d963,
-	0x7180cfef, 0xefb2f109, 0xf9216932, 0x3873f6c1, 0x1f77e9be, 0x3a864efb,
-	0xd7f38273, 0x4d836fe2, 0xe861fac2, 0xa3ac116c, 0xc7cf98f6, 0x0f53ace8,
-	0xe6799674, 0xd043e230, 0xeab6cfcd, 0xd5fd1531, 0x5fd88cd9, 0x708f4d9d,
-	0x1a780cd9, 0x2c03534c, 0xcc1ba69a, 0xc7850f5e, 0x1f26f39b, 0x7e297292,
-	0x20fa316e, 0xb4b7437d, 0x48dfca16, 0xe8b7e361, 0xdf216b74, 0x34859772,
-	0x6e1d5e21, 0x376bcf98, 0x6a7e2147, 0x26bd1ae7, 0x9f8fcfda, 0x63de5897,
-	0x67fa12f1, 0x72f66bad, 0x22e24768, 0xfe024fec, 0x738c075c, 0x4ae9fdac,
-	0x51bf6e79, 0xb7a7dfa1, 0xf027fdb1, 0xe8c6db50, 0x0107ec4b, 0xbd3c20d7,
-	0xf024fdaa, 0x8db07f31, 0x17a505d1, 0xcecd7780, 0x3349db08, 0x0102eb1b,
-	0xe5568cfa, 0x6d93dbeb, 0xf3044727, 0xd007f035, 0x81620ec1, 0x79f2d679,
-	0xeeb9d3ce, 0x6755fd83, 0x50341ff6, 0x0d1f16d4, 0x881f7ee0, 0xffd66b7e,
-	0x0164fb3a, 0x0e93ab21, 0xadf62a61, 0x7f7aa861, 0x6f78e56f, 0x7bb69482,
-	0x4d4dd382, 0xcbee1b61, 0xb80d939a, 0x19532d9f, 0x231cb35f, 0x133c508e,
-	0xdebe43f2, 0x457db17b, 0x9964db64, 0x71e2bdc2, 0xfa44d6c9, 0xaba44fcf,
-	0xa36ce224, 0xf5b67dfd, 0x0025a8f5, 0xc82eafdf, 0x37ae98a4, 0x3777ad82,
-	0x3b5d3be7, 0xde91c029, 0xcc248c1b, 0x3fb72f7a, 0x01223be2, 0xec386b3c,
-	0x1f2e9ebb, 0x17a529fb, 0xf6c1cecf, 0xcf92e8ab, 0xf6eb3d3e, 0xbbbce94f,
-	0xcbb44c76, 0x4e4d3640, 0x7c409fa4, 0xa53b7d84, 0x4c99389f, 0x37de2895,
-	0x351ebdb4, 0xfcfbb68e, 0x81f3a397, 0xf7cdbf6f, 0xe5e799fd, 0xbb9700f5,
-	0x75ecf67e, 0x95e35e50, 0xce304d62, 0x95ffc7ce, 0xdea9fb42, 0x26100f51,
-	0xd57cbf4d, 0x74f5a7e8, 0xfbec6dde, 0xa836c1ce, 0xf713f9f7, 0x6ef0075f,
-	0xf2c26b6a, 0xc36c4f33, 0x7b3f6bfc, 0x683fdf76, 0x94675abd, 0x799dea1d,
-	0xa5e23f7e, 0xc077a5d6, 0xeba2077a, 0x33f6bbcd, 0xe126d97e, 0x1973237e,
-	0x2d74131f, 0x9ff3f7e8, 0x2a1b1e2d, 0x16f7c437, 0x833b9723, 0xcb391c98,
-	0x994d6ff7, 0xb3d205a5, 0x85cc44cf, 0xfe8dbaf5, 0xcf9868ec, 0x1f174628,
-	0xb6d47871, 0x2db831ad, 0xf9fb1ed8, 0x487bee80, 0x9e7d2873, 0x6b4ef4a2,
-	0x0050b8ed, 0xeb0afde3, 0x11257ad3, 0x2f37be14, 0x7cc12e38, 0x18354722,
-	0xbf9e706a, 0xd574e564, 0xebc5e5a1, 0xe96a3d18, 0x059b0be0, 0x907d8beb,
-	0x4d32bbb2, 0xb2603e41, 0xd6ce3e33, 0x6aed5297, 0xd7efd2b2, 0x65d973af,
-	0x4f97c78a, 0x4a9c9e1f, 0x211b3ff3, 0x65fe2015, 0x8f39c989, 0x5ba9c705,
-	0xd04e465f, 0xd9a2eaf9, 0x11b0497e, 0x07c8b5fd, 0xd7ba31b6, 0xf205bd13,
-	0x89f200fa, 0x072e16ba, 0x1279b077, 0x96632073, 0xae59db15, 0x83ce098d,
-	0x3058b3b6, 0x29b8c81f, 0x678ee407, 0xc51dca2e, 0x233df388, 0xe4f101f8,
-	0xee09cc2e, 0x711d04b7, 0x8c13fe01, 0x7e30b534, 0x4ffb4953, 0x8a4d2e8f,
-	0x09a60a2e, 0x16b95883, 0xf2f0b74e, 0x923b451f, 0x3b5e01a2, 0x60f25563,
-	0xdaf2be20, 0x6e4cddcd, 0xe91c72bf, 0x08740dd0, 0xaa4ebbe3, 0x6472f6e4,
-	0xf70e94ae, 0x5c3a471c, 0xabf8cede, 0xb8d4bdbb, 0x259ba68c, 0xefe61732,
-	0x7404f4e6, 0x9bf9a764, 0x7d71a3a2, 0xd9fcebee, 0x39baa7c0, 0x61ef75dd,
-	0x4e86f6f4, 0xbcf801e7, 0x36e47db1, 0xf95a0790, 0x113b5528, 0x6f8a6edf,
-	0xd67a0493, 0x67a0c3ba, 0x3b1355d5, 0x6ef757ec, 0x081a1fbe, 0x7b7707ee,
-	0x2fe872e5, 0x5d9a6e35, 0x992f5096, 0xeef34a9c, 0xfb04525a, 0xd96b652d,
-	0xd20ba01e, 0x20ab912e, 0x0ddced5f, 0xab8fafed, 0x2099cbb3, 0x9927b6f7,
-	0x47ebfd69, 0xcdfb6314, 0xf4294ae9, 0xb620a9e7, 0x706f2127, 0x9cdb3ca1,
-	0xf20ed23c, 0x88daedce, 0x0651177a, 0xb89ca1d9, 0xbea16bf4, 0x6c80b3db,
-	0xe3ecc292, 0xcb03923d, 0x08de91bd, 0x3b7a7eda, 0xeddc7fd3, 0x139f1f6c,
-	0xa1a911f0, 0xd78c1173, 0x788982fd, 0xbd9d20a4, 0x930a67b9, 0x509a2fb3,
-	0x746d9ece, 0x34541390, 0x10568c8f, 0x358e02af, 0xa03a99ad, 0x9966425b,
-	0xf8cb1e60, 0x4c0d5a3c, 0x3973446e, 0x9b2f7590, 0x1fbe72c7, 0x78eb4796,
-	0xaffbe46a, 0x9b05c995, 0xe0e41727, 0x921e3e39, 0x73970245, 0xe5bae874,
-	0xb527dc3e, 0xe2feb34f, 0xdbbc8e4c, 0xe855e842, 0x6c7a5a47, 0x6ca6e3e2,
-	0x3301203d, 0xa55ad949, 0x57d7e7da, 0x5d3d5f13, 0x755bf5e7, 0xa8b989be,
-	0xfc82dd37, 0x6c91837c, 0x77f7fa97, 0x5be3344f, 0x3cceb115, 0xcdd7e409,
-	0xfa3fd416, 0x8720e9f6, 0xb8f4022e, 0x84dec97c, 0xea1670ab, 0x09d3bd68,
-	0xede03b56, 0x5a8e1c47, 0xbdafab7d, 0xd19c0f46, 0x4325c9ea, 0x4186e969,
-	0x549e0173, 0xa198b75f, 0xa7b68d9d, 0x8fb612f5, 0xf213627b, 0xf7ec26ab,
-	0xeb1b68f6, 0xd859d627, 0xcb2e2c00, 0x27c98eb9, 0x7adc3dab, 0x9e85a3d2,
-	0x074f28bd, 0x82db33f4, 0xafc7e1fb, 0xbd194b48, 0x01284151, 0x41fdb23d,
-	0x5278fee8, 0x3d447a41, 0xf4e0ddca, 0xb647a786, 0xaf54dc5f, 0xd29b3d02,
-	0x27a65ae3, 0x4fdb085b, 0xa7232e8c, 0x7c007932, 0x159f542b, 0xefbb54fb,
-	0xedf6fd05, 0xefdccbfb, 0x1fb606dd, 0x801c29bb, 0xfce8fbde, 0x9be74665,
-	0x48fdd036, 0xfdd137cb, 0xffc214d8, 0x981fe7b5, 0x04079c27, 0x73663dbf,
-	0x745f0076, 0x19ab7f6f, 0x47f396c9, 0xc83fcbf7, 0x65de98be, 0x5fb4ca86,
-	0xa1afdd33, 0xe0a663f4, 0xea63e6b6, 0xb9113901, 0x8947ad5e, 0x266883f4,
-	0xdeb1bebf, 0xa3d24238, 0x55f1c3de, 0x007d73ab, 0x46f41e7c, 0x6324114a,
-	0x131bd33d, 0xde00e640, 0x417a47b6, 0x20484e3f, 0xccc2e7ae, 0x67df3f67,
-	0xfce29f02, 0xeac51090, 0xff7df2f7, 0x4ff7af29, 0x4b9c869e, 0x3a283f70,
-	0x0f2271d7, 0x3b448f2c, 0x172c2f3a, 0xd73be9f3, 0x137cd998, 0xbedecaee,
-	0xc18f0429, 0x3e75757d, 0x5eeb37e0, 0x25a97e9f, 0x8b908e38, 0xf981ba5a,
-	0xf581fc83, 0xb81a8e54, 0x7e7eeb5e, 0x71d0d33e, 0x7b5fdf04, 0xb482b8a8,
-	0x2bfbe0d5, 0x5635c7ee, 0x2522fa02, 0x9d2c4707, 0xe1befd57, 0x088d1f6c,
-	0xeafb4364, 0x314dd758, 0x9331dfb4, 0xdfa0fef8, 0xa09ce0ab, 0x0c531e27,
-	0xf5e0dde0, 0xd3f9e087, 0x8f7fd618, 0xe991ecd5, 0xd623b8fe, 0x3ded0d15,
-	0x03eec465, 0xe5077339, 0x896fb027, 0x4df808af, 0x0147f13d, 0x5d58c79c,
-	0xbf4031f1, 0xc9366772, 0xf257fca2, 0x63f7c2e7, 0x84b95111, 0xfb71f3f6,
-	0x85799f6f, 0xcaf85ab6, 0x03df85b9, 0x22317afa, 0x18e2e803, 0x513b97d5,
-	0x830656df, 0x944bddbe, 0xfc30b6c1, 0xcc0ba457, 0x20beb33a, 0x55663f98,
-	0x7a442f9f, 0x6fc30c4d, 0xe214f9fd, 0x09fe8589, 0x627bbf9e, 0x1f5df614,
-	0x56ea8230, 0x78833e7f, 0xeb1f7f68, 0x985b7548, 0x30c53771, 0xc84ddb7a,
-	0xf7e570d4, 0x0f7671f1, 0xb030fb65, 0x7f02f24d, 0xe1bf5eac, 0x07e532cf,
-	0x3eacebd5, 0xe831694c, 0x8f36d56f, 0xc7f3474f, 0xd11f8c0c, 0xc5cdb37f,
-	0xeb47b941, 0x0e03c7e9, 0x4b20f43c, 0x2e52e0f9, 0xbc3596b7, 0x13d825f9,
-	0x3cc4f5aa, 0xdcb3f69e, 0x4a983cec, 0x2cb33e8b, 0xbfb6028f, 0x25b73bf2,
-	0x5c4a5c80, 0x32eccad0, 0xf40d9264, 0x4331c95e, 0x317910be, 0xfa8f4b3d,
-	0xe29fe231, 0xe7188beb, 0x82f7c04c, 0x80f504c1, 0x7a45b705, 0xd07c213d,
-	0xa5a1e1cc, 0x7eb84f9b, 0x767feda5, 0xfe81196c, 0x739ca23a, 0xdc163e81,
-	0xcfc54e76, 0x53ff25ba, 0xad5d028f, 0x649fdab1, 0x433865dd, 0x623bfee8,
-	0xc43af3bc, 0x675e4f53, 0xa04cfaf6, 0x87c640df, 0x30eacf60, 0x940a3cd9,
-	0xa2cf111b, 0x291a9fdd, 0xe60ecbe3, 0x361e9e97, 0x196be819, 0xde0337b1,
-	0x1244b597, 0x033f084f, 0xc3e81805, 0x3f609e7d, 0x3cde3b4b, 0xaddcfc0a,
-	0x2c9d23f7, 0x8f105b35, 0x9c7af3ee, 0x74316907, 0x8a7b45f9, 0x8e5123fb,
-	0x9e7d60db, 0x9f47c67b, 0x263f491a, 0x7eb8efd2, 0xfdf0edd7, 0xe228c8a1,
-	0x4b78fa00, 0xf3a70ef6, 0x832b35ef, 0xeabc2863, 0x460e948d, 0x734e3763,
-	0xd243fe88, 0x77fc6aac, 0xcc25f5bc, 0x65d9b967, 0xc2be3904, 0x32a7cf41,
-	0x6457c9e0, 0xef8a151b, 0x9185f2f1, 0x45ef8f97, 0x6c7fbf7c, 0x661ff4a4,
-	0xe1c7dd1f, 0xa5ea23df, 0x71f27db0, 0x0e7ea906, 0x4a686bd2, 0x943c7ddb,
-	0x3e79f3e7, 0x604bd79b, 0x9f7c1df9, 0xeacb9c7c, 0xc5f1c769, 0x3b36fe30,
-	0xe015b1d6, 0x8cf9db45, 0x22fb1740, 0x16b7a8bc, 0xfc077e52, 0xea3a6d6d,
-	0xedaf94ad, 0xc4d97ac0, 0x4cf58d17, 0x03485728, 0xcfb07be5, 0xcf84148b,
-	0x274a52a6, 0xd7b03cb4, 0x04aedb64, 0xa9f02af1, 0x8c7b63c5, 0xc3c9eff4,
-	0xd43e9251, 0x61e5428e, 0xa3b30c7b, 0xd27f6118, 0x9e991899, 0x85f10c36,
-	0x3e5f2274, 0x608c6ebe, 0xf4fba078, 0x7bd418b5, 0xfba1397d, 0x97c704e5,
-	0x0f1f67e0, 0x8ab5e352, 0x5e6de1e3, 0x8d8c516f, 0x007b4fc9, 0x31c7ddf7,
-	0x165c7eac, 0x0f424393, 0xcb8703ff, 0xc8549a4d, 0xd5533195, 0x1c4dc5fa,
-	0x44c5379f, 0x087ebc09, 0x88f215f3, 0x345f17f2, 0x5e0b0fdd, 0x217f2135,
-	0xb0d9031b, 0x63bd68ff, 0x2c0a6e58, 0xe472a58a, 0x18dfaa26, 0x22ddb1f3,
-	0x3cefdf68, 0x85d04a3f, 0x3e9c8095, 0x1853d625, 0xe54f7e40, 0x296bae1d,
-	0xba437ca1, 0xd037fe34, 0xd694c93a, 0xd8560c87, 0x03a64ef9, 0x208fed02,
-	0xe147f40a, 0xb850e7fe, 0xc63bc76b, 0x319fe0e9, 0x96f11e92, 0x9f70f247,
-	0x7585ffbd, 0x9cf2ed21, 0x51d1eccd, 0xceb8ffbe, 0xe9fa0175, 0xd42dfdba,
-	0x7d198fcb, 0x3096add9, 0x63df46e5, 0xf2c1490f, 0x3d973fc5, 0x762fca46,
-	0xe4fd7677, 0xa5eeba66, 0x861db29d, 0x5fe77a5c, 0x7a031ddf, 0x0ec1a775,
-	0xdf2a46e7, 0xbcc3d5ef, 0x791e981b, 0x83a6a74c, 0x9f55dfb3, 0x1962d273,
-	0x83dea8be, 0x3be09cfa, 0x4adf7e42, 0x5c81577c, 0x461c465f, 0x66b4ff48,
-	0xe1420cd5, 0x0eb2c2b7, 0x6be7d1f9, 0xbc1ea1a7, 0x7cb07892, 0x4fe18b59,
-	0x4561f2a1, 0xeabf3aab, 0x56fe7561, 0x67df3aaf, 0x2f0f2e7f, 0x32c7a7df,
-	0xd94b3e3a, 0xb03fe03e, 0x3d05e4c1, 0x98af5b48, 0x3ca4cbd7, 0x24f813b1,
-	0x4760fb95, 0x48e11758, 0x6ebebe04, 0xc5e2696f, 0xe7f57cec, 0x10de21af,
-	0x37a8237d, 0x6c6f12e4, 0x63cb7eff, 0xf4238415, 0xe071f0ab, 0x2cb671bc,
-	0xc6263afc, 0x10653d0a, 0x8bbe27f6, 0x45e3827e, 0xcfea3ce1, 0x8f98079b,
-	0x5d9fdb05, 0x1b9c7e19, 0xa9b1c6fa, 0x7db064e4, 0xfc6b931c, 0xa3e82d1c,
-	0x7e127cfe, 0x07a17917, 0x31a5db07, 0xd9a48afd, 0xf906454e, 0x8b63b094,
-	0x224270fd, 0x3bb464e6, 0xebcfcfdd, 0x5fb05cf6, 0x083d009f, 0x6514e3f6,
-	0x714e9f9f, 0x66c6f7d9, 0xf70687eb, 0x941d768b, 0x43f8ceae, 0x58b2eef8,
-	0x6b8e1c6b, 0x57187627, 0xdba2fbd0, 0xe8bb062b, 0x6778ff7c, 0x546ba279,
-	0x30f53f28, 0xe85189bf, 0x9c95165f, 0xbc391a25, 0xd42dfdac, 0x95bea8bb,
-	0xd3e74c0d, 0xbd23b7bd, 0x04ce24af, 0xbd9ef3a0, 0xff5c33c3, 0xf315fc86,
-	0x6259e599, 0x9ba79820, 0x2abfee98, 0x1d599f3e, 0x99d3ef4c, 0xc71c061d,
-	0x025b1441, 0x7cd9a51e, 0xd3d4f329, 0xf9be84fc, 0x908e9183, 0x12fe7cf1,
-	0x9df0a7b4, 0xd4b253c0, 0x36f30495, 0xbc74b8c1, 0x824de208, 0x5dac69b4,
-	0xe4a27481, 0x3079b3d4, 0x0d264f3c, 0x675f5069, 0x9d6ccbf6, 0xd0090674,
-	0x985e0fbe, 0xc6fcf2b7, 0x568bbdd9, 0x158b77c0, 0xcf9188f9, 0xe52c4763,
-	0x2fe46687, 0xc9b75866, 0xfd1cfbe2, 0x94f53c64, 0x3d8fb829, 0x3bda0943,
-	0x02369106, 0xe72c5ae3, 0x1b58b03c, 0x8f9049b1, 0xe0faf5b0, 0x66ce70fc,
-	0x2346e8f1, 0x0b19dc9f, 0x677a527c, 0xf285e025, 0x19ff6665, 0xc3ef5ca8,
-	0x73e0b773, 0x4d7e7c31, 0x1325cf9c, 0xe2588706, 0xb01ef1c0, 0x40419cae,
-	0x49d65984, 0xd44b7ed0, 0x25eff454, 0x7969e000, 0x8abd54ec, 0xd53bc56f,
-	0xeab9c4f9, 0x9d4bb27c, 0x3f93d337, 0xcf928be8, 0x16217499, 0xc02359cf,
-	0xfce062de, 0xebcf99a2, 0x3d74a408, 0xfd3e71ef, 0xbb13f58d, 0x8eeebcfa,
-	0xe3b41231, 0xd0cd9825, 0xde57d53f, 0xcafa658b, 0x97281e27, 0xf3cfc803,
-	0xc0f9b626, 0x837cd3ae, 0x7e8bbf64, 0x1b2ab66f, 0x3d5494f4, 0xc76624d3,
-	0xf54adbd1, 0x865b7cb4, 0xe689becd, 0x1d7ec1eb, 0xd5b7f30b, 0x49f68d3c,
-	0x0247ab13, 0xdc8fe0cd, 0x8366c9b6, 0x81e5717a, 0x8bd046c9, 0x76db1057,
-	0xbfbe8612, 0xce86fba2, 0x53c809f7, 0x5e9c48bc, 0xf3290f22, 0x7cbc0d71,
-	0xc59dfc07, 0xe18b13f2, 0x65feca5c, 0x3a75e475, 0x90e0eec0, 0x77d62e51,
-	0xa16ebde4, 0xcecd65e3, 0xb3bc3b43, 0x0973f99c, 0x3463f7df, 0x905c6afb,
-	0x8f3cb1ce, 0x707587e7, 0x899c6ebb, 0x746d6bf9, 0x36666288, 0x8c71fac0,
-	0xfc44edfe, 0x5af2fb63, 0xfd07fc12, 0x47fb0795, 0x5829343e, 0x7467dc1c,
-	0xbdb37ca8, 0x1bd696a9, 0x87edf7a3, 0xa78e3c7d, 0xa37d3c79, 0xbf9406f4,
-	0x628b3a9d, 0x6d7db1d4, 0x861302ce, 0x14b80653, 0x04d07edb, 0x7c904cfd,
-	0xbd4c6698, 0x5fa609bf, 0xd147edc5, 0x06ef4649, 0x12a68eba, 0x77b4678a,
-	0xd820f9fc, 0x4907e5a5, 0x88e9e001, 0x0739c841, 0x7a15d39e, 0x3a1afb1c,
-	0xfd406c98, 0x2a932ffc, 0xd5013bf0, 0xd2bbce8c, 0xbe2116c6, 0x755f2c0f,
-	0xe36a3f28, 0xb337e464, 0x6abf32a6, 0x57b35cfd, 0x10ce4092, 0xbbd277e6,
-	0xb10a6f32, 0xc43f0897, 0x773206fb, 0x44f39857, 0x4fd31c6d, 0x3b3066ab,
-	0xa346fd6f, 0x1d537fca, 0x335eecc7, 0x8c8f26e3, 0xfcc47943, 0x5c7179a7,
-	0x46411b6f, 0xe10a9f00, 0xaf504523, 0x81edf4ab, 0x9cba8cf8, 0x8e3999f3,
-	0xfdea0302, 0xbe08df9c, 0xf6c41cee, 0xd2423cf3, 0x9367ae81, 0x87ffe406,
-	0x7e456f4b, 0x18f11373, 0x951f6f00, 0x310278b1, 0xd55359ef, 0xa71cd27a,
-	0x5cf37f3a, 0xf0c51ead, 0xe79dc621, 0x09579752, 0x5aaa783d, 0xfff05e0f,
-	0xb9468abe, 0xdd54f89a, 0xe7e02185, 0xc000f660, 0xe873f30b, 0x1bdc6e91,
-	0xbebc3f99, 0x388def3d, 0x127767d8, 0x4976cfbe, 0xb2ffd1cb, 0x82115a4b,
-	0xaf5ad4ff, 0xb8647204, 0x987dd855, 0x7934e4de, 0xc3df83f7, 0x91128359,
-	0x49e3cebc, 0x493c400e, 0xadbe907e, 0x57165665, 0x30b51c41, 0xa45b349f,
-	0x16fef41d, 0x65da3e5d, 0x2aaca25b, 0x0da6fa3b, 0x13d4054a, 0x44c558f6,
-	0x6e9c6df2, 0xd7779dc2, 0xbafe31c5, 0x71766259, 0x9e333ccf, 0x9cb3e32b,
-	0xbc413f2a, 0x9d828e4c, 0x229c6470, 0x63fda3ea, 0x5c95c1b3, 0x44af5340,
-	0xd2171197, 0xd11b265e, 0x4fe1a8ae, 0xb476b1f1, 0xce0fc7eb, 0x9cfd3b41,
-	0x2fb43c8e, 0xfd844b12, 0xffd8292a, 0xf4dbd99c, 0xdf53a710, 0xdcbf4db1,
-	0x7bbba412, 0x8d5cb8e2, 0xaf409124, 0xe7ba767d, 0x7ba7684c, 0x5ffce75c,
-	0xa35acba0, 0x2171ed0f, 0x07df8af4, 0x38ab8b92, 0x9cca18bd, 0xf9d056f3,
-	0xb46bbcf5, 0x1d19f9c3, 0xe7ffb46d, 0x9da344f7, 0x50455f51, 0x652c6d3e,
-	0xec07a47c, 0x9f1d745f, 0xf9e35745, 0x8ad4a360, 0x663ba3f2, 0x6af1d232,
-	0x073c01cb, 0x74a56f57, 0x569f2218, 0x6be750ef, 0xdf9e2748, 0x47ee9f6b,
-	0x0517c8cf, 0x56ef761f, 0xd4c323b7, 0xcb8f377c, 0x7da77c8b, 0x7d4c0556,
-	0x9d8b3dae, 0x8641e9c3, 0x1de8a3ae, 0x2eefb723, 0x008a9db0, 0x7494fb56,
-	0xc7adfd31, 0xfb665a7a, 0x2283c99f, 0x6e568e3e, 0xedbd7115, 0xe0bfca3a,
-	0xb0f42afc, 0x07f2c222, 0x92721d74, 0x42df382e, 0x7fe84ede, 0x7c084e42,
-	0x52109695, 0xa743f742, 0xc9434fe0, 0xed37c050, 0x0489f71f, 0xd8314391,
-	0x7dce07bf, 0x9478f8e3, 0xb7203c1e, 0x17b33a3d, 0x6a59abe8, 0x06693940,
-	0x9ba69f3d, 0x83ca1724, 0x323daa97, 0x692c7bc0, 0xd6833598, 0x8cee6f1b,
-	0x3a513804, 0x3f4a1239, 0xb197c44d, 0x11d1524b, 0xbf457796, 0x848e961d,
-	0xc47df33c, 0x74e998f4, 0x054fd0c5, 0x7a687e38, 0xc8e76240, 0xeb1f9629,
-	0xbadbfda1, 0x53274869, 0xf30f5789, 0xf1a9b0ab, 0x9d49253f, 0xa3f4a69f,
-	0x70c38c0f, 0x1f4e7870, 0x08772ea1, 0xfcd4477e, 0x857c932e, 0xc1f9187a,
-	0x5d80efc1, 0x193d7221, 0xd50dfa01, 0x6a1f7144, 0xb8ebe0e9, 0xf26fdd6f,
-	0xbf185c75, 0x13b70f49, 0x2bfc4b5f, 0xd3fa969f, 0xeb1bf759, 0x7a10a4e5,
-	0x65e2fb14, 0x907f8b03, 0xa9fe655e, 0xe5193312, 0x642afa03, 0x3fb14576,
-	0x8cfa05ae, 0x315dd209, 0xcf119eff, 0x19086ce9, 0xa1367402, 0x5327c23d,
-	0xfef1e4bc, 0xcbba05ae, 0xe223ea0f, 0xd254d15c, 0xa532be8f, 0x705fd42c,
-	0xa47d09df, 0xd26b6a40, 0xb91f0267, 0x1be609a7, 0xe3434f42, 0x512f808b,
-	0xda7dc27a, 0xcbaace4f, 0xf026f435, 0x52e5f42e, 0x367480d2, 0xea60a75b,
-	0xf2855cab, 0x5b32dcb5, 0xacdfed0f, 0x0936f462, 0xea0b31e8, 0xdca5e9ab,
-	0xe96bceac, 0x0ba88e91, 0x9f4b571d, 0x10dbd103, 0x5f2137a0, 0x6f4d2f63,
-	0x75bfe3d3, 0x7f1e9b7a, 0xd2d37a11, 0xbb5fe099, 0xa0e56c22, 0x4b57d73f,
-	0xde0a0f28, 0xf904d61d, 0xa89975e1, 0xb68aef4f, 0xdf5d7ea3, 0x3b0bcac0,
-	0xbdc4321d, 0xe5e3ad64, 0xc872ce99, 0xe5a7afd7, 0x23a2ebb4, 0xd8662e2c,
-	0xef3cac9d, 0xadd786ae, 0x587867a0, 0x6f3f97fb, 0xb968a396, 0x2fb799b7,
-	0x7c872d6d, 0xff6b0b7d, 0x46a9f819, 0xb79a7c43, 0x7d5fbe09, 0x1d9da66f,
-	0x3efe99ab, 0x9777af91, 0xd8ebdcf4, 0x5bb595ae, 0x883cd075, 0xe99ff9e0,
-	0x75f1d7e5, 0xd6cadc4e, 0xfae27719, 0x8ba50aa9, 0xea0f0115, 0xb574a76f,
-	0x06dfc8c5, 0x4a973f38, 0x4e9069ad, 0x5217eca1, 0x22ded987, 0xcc7e650f,
-	0x7b8874ed, 0x45fd99e2, 0xce20fff8, 0x9f4432a0, 0xd99e27b8, 0x84bd4563,
-	0xa0018a18, 0xa8ac4787, 0xa4ff0b5f, 0x812221ef, 0x723587bc, 0xbfac243d,
-	0x03564a72, 0x865311ea, 0x5fa53f08, 0x9b8e94bf, 0xc98be177, 0x3f43ece1,
-	0xe69ee3e2, 0x7a7d1371, 0x075337b2, 0x880bb174, 0xf4800524, 0x7f41afde,
-	0x487e05db, 0xa43ca426, 0xf2caf004, 0xbd7fe35b, 0x853c65a9, 0xef41aeaf,
-	0x2196a101, 0xccc9dc61, 0x1c1be24e, 0x53fe7fd5, 0xc467c4f4, 0xff362638,
-	0x1e544d95, 0x7e31d123, 0x8fe38736, 0xe90abf8c, 0xd3c73677, 0x2a7f05cf,
-	0x9fc00520, 0xddbc70e6, 0x347aa664, 0x8356c3f2, 0x133c6f86, 0xcb6a720f,
-	0xbabbfa80, 0xaa57c35c, 0xb92bb8f9, 0x092b7ede, 0x4a727ea0, 0x7a7a62f2,
-	0x6bdbd30b, 0xbf50472c, 0xe98479e9, 0x8fc4b5ed, 0xbed68ffa, 0x9d53b359,
-	0xe7536baf, 0xf9d5dbeb, 0x8e0f1c9e, 0xaea5b3d3, 0xd58aec18, 0x768bbf0f,
-	0x5fc16aec, 0x42fe6abc, 0x5fc67115, 0xed06ba1e, 0x6f98df51, 0x6f4f4d3c,
-	0xd0b8aac5, 0xfa9c02df, 0xb22f35ec, 0x613714f8, 0xeb1e8276, 0x4e70f988,
-	0xa4791a25, 0x9c7927e5, 0x86fb089f, 0x84792fe0, 0x8e7a23c9, 0x8241d77d,
-	0xd7ab5c7c, 0xbd73c4f5, 0x84d39f97, 0xfa0793fe, 0x35d3d00f, 0x4164480d,
-	0xdb7f6439, 0x9fc88724, 0xc0668579, 0xee99be73, 0x6c978067, 0x545971c9,
-	0xca05f0f4, 0x7bcf8199, 0xbd0d72ea, 0x2dd6f388, 0x81665e9c, 0xff8e8527,
-	0xe781c97b, 0x32b7c3ba, 0x5963997a, 0xd1faf487, 0xe22f466a, 0xe7e577dc,
-	0x4dfc873c, 0x747d79ce, 0x5ef54112, 0x17491e9a, 0x8fe67ce7, 0x1d1897af,
-	0xf87d55d4, 0x82cfe818, 0x246e1c2f, 0x3e10faf1, 0x64cd34d1, 0x934a3b06,
-	0xaa839d81, 0xbc5c7fa6, 0x38cf8434, 0x13134a22, 0x88ee5940, 0x5d6cfb47,
-	0x669c7aa4, 0x7fbbf3a9, 0x4fd2f380, 0xd44ed123, 0x954130fb, 0x70eb77a4,
-	0x6b3edb8c, 0x31527e60, 0x7707559f, 0x7ec3f3ee, 0x08ebff5c, 0x359f953d,
-	0x5ac5f792, 0xe4c4b65a, 0x6a7186ca, 0xb3233e74, 0x5fa27663, 0xb03b8c57,
-	0xf283d65d, 0x931af8d5, 0x106901c3, 0xefd2e1c6, 0xb5fea1d9, 0x4f8c89d1,
-	0x2aeb11df, 0xca0f8848, 0xa43f614b, 0xc6a49652, 0xc126fd04, 0x376606f8,
-	0x5c710bf9, 0x6361be32, 0xb69e7d88, 0x568f1b0f, 0xf5f8c096, 0x61ce29f7,
-	0x1da307de, 0xd39f30e5, 0x9a7b8fdc, 0x474efdfb, 0xcce03f31, 0x752cfabe,
-	0xf734f4f1, 0x518e9e13, 0xbd4487fb, 0x8ecc09a5, 0x6cd1b272, 0xbf07a8de,
-	0x1c6f313a, 0x21ec4946, 0x93c60353, 0xea78602c, 0x6dbd13d9, 0xa5ff8853,
-	0xfbf4a12e, 0xd87f9f30, 0xba43379c, 0x31b8f5bc, 0x23df0ed4, 0x0f77f3b1,
-	0x089e97a7, 0xeb718a96, 0x0fbf2a12, 0xe799ec78, 0xe5f63c47, 0x13bc8ac7,
-	0xc099effb, 0xfe5f6bf8, 0xb84f2c3b, 0xf5d843dd, 0x69f7f207, 0xd0547bfd,
-	0x044073b0, 0xfd6bcfb3, 0x3f050bf3, 0x05f9fee3, 0xec2d1f9c, 0x45827e60,
-	0x4a9cd266, 0x247717cb, 0x946e73b2, 0x9fe55b27, 0x515e44f7, 0xcba0863c,
-	0x3ecef49e, 0x2123f67f, 0xee3aecfe, 0xeb13accf, 0xdf5eaddb, 0xbadf0903,
-	0x8481fb3f, 0x6d6cfe30, 0xa08bc3dc, 0xe20b0c47, 0xc18dad61, 0x2dae42ad,
-	0xef6f7b07, 0xe8718272, 0xd65adf6b, 0xb5e0f604, 0x2a0b003f, 0xa7d431f2,
-	0x079c38eb, 0x53bc575a, 0x9d951447, 0x4251107d, 0x8aec9fe6, 0x4351e551,
-	0x4d03890f, 0xb5514ead, 0xaa186f4f, 0xfd643faa, 0x4cf2aa35, 0x9f2abe4f,
-	0xaaad72d5, 0x65ad55fe, 0x87f0fcaa, 0xcfd557af, 0xa3074323, 0x0c90ecfd,
-	0xb57221b6, 0x3e554ab7, 0xaa2de772, 0x86919ff6, 0xbd69e3cd, 0x79fe42dd,
-	0x8aa39d1c, 0x39ce7183, 0xed554b6d, 0x62b6a49b, 0x9f46f01f, 0xbd6893e4,
-	0xcb5f1c15, 0x62ff993b, 0x556afb74, 0xd8a367ff, 0x5fad183d, 0xa32e7696,
-	0x912ed61e, 0x7efea447, 0xfb8eeada, 0xa8ee219b, 0xf296bfbf, 0x356eda4d,
-	0xfe80bf3d, 0x8e6fd5a6, 0x5d3f7026, 0x7461490a, 0x0b0ba5ad, 0x5bbd7fea,
-	0xe627b465, 0xc687ec91, 0xc40cbc23, 0x5fc7f4ab, 0xae76612f, 0x76ada7de,
-	0xf559ff88, 0x47a432d6, 0x2e9a9253, 0x5d351422, 0xd3508e44, 0xa6aed585,
-	0x6a25c183, 0x3dc2d03a, 0x0ba6a1da, 0x43ffa7e2, 0x2ae02de0, 0x553b1ee0,
-	0x785a374d, 0xda0093e7, 0xc95eddd9, 0xfc6123ee, 0x70dbede2, 0x1fd2975d,
-	0xf86a89f5, 0x34701c16, 0x2c6e1059, 0x61e84cbe, 0x68ffae26, 0xaf4213fd,
-	0x7ae44b89, 0xf847ef15, 0x0f259a17, 0xfe7d51ea, 0x865f12c2, 0xa7f4132f,
-	0x44ecc206, 0xf0c4a4ce, 0x3efc4676, 0xc0519d90, 0x2620f675, 0x03886b2f,
-	0x882be1ed, 0xc9ddf90b, 0x3ed15bca, 0x63f2cab4, 0xad9ebbf4, 0x35527a62,
-	0xbf9f22f1, 0xaa02b8e2, 0xfb109287, 0x528e16ab, 0x02b3e487, 0x20f2e1bf,
-	0x79087485, 0x1378c2e0, 0x62e6864a, 0xad471f95, 0x30df82e7, 0xbd097f84,
-	0xe0278c57, 0x189af829, 0xe41a44cf, 0x1a17d824, 0x6846473e, 0x3b6a48fd,
-	0xe0f3b08d, 0x22fe2160, 0x44265dad, 0xe9916e0f, 0xcc90f238, 0x57f14226,
-	0xdda07360, 0xce7488af, 0xe625ef87, 0xc2bd26b6, 0x935713ed, 0x80c4fb3e,
-	0xfe12eaf2, 0xc91e59e8, 0x7f6668ff, 0x6bf0b43f, 0xf89fe5d3, 0x5e3c6d03,
-	0x55ef1052, 0x078f0f2f, 0xa76fea7a, 0x857d1fb4, 0x02eb23f6, 0xc3f6a1b1,
-	0x9206fbbe, 0x1373d71f, 0x424ddc71, 0x693710f4, 0x133f3c9b, 0x4e54c4ec,
-	0xecca4146, 0xab5da458, 0x8ed1eb07, 0x012ba3ac, 0x2121afba, 0x60ccda7e,
-	0xfee5e639, 0x74371179, 0x42e27d29, 0x3fc78da2, 0xc22778b0, 0x5f38a0f9,
-	0x139e740e, 0xcf701471, 0x2221fc16, 0x9139a84e, 0x4973839f, 0xf74ff42e,
-	0xb444a6db, 0x29fdd01f, 0xbec7ee85, 0xef2c22b8, 0xeb351fb7, 0xb2147117,
-	0x42ed10b5, 0x7bd742cb, 0x7a10f019, 0x3ea86fcb, 0x1234f780, 0x0dd7a615,
-	0x0381f63a, 0x553b0b8a, 0x46f59e71, 0x7b01807a, 0x8e3c8bc1, 0xafad4daf,
-	0xe3c89b3f, 0xe739f893, 0x181af052, 0x4eee3c1f, 0xf532e3e0, 0x27771130,
-	0x7f42f8e0, 0xc151efb8, 0xd8bcefb5, 0xe13df707, 0x72e02ee0, 0x29f3a8ae,
-	0x3d6c97c0, 0xeef00092, 0x83ee7288, 0xfd47e9fa, 0x705d24a7, 0x1772155e,
-	0xb6f6cbc6, 0xcf3f78cb, 0x5bc5813d, 0xc8c8f7b9, 0x4c3bba1a, 0x6ead37e8,
-	0xc2f51d7f, 0x68ca46ae, 0xa6761ea9, 0xbfa90e91, 0x0340bd88, 0x47ce81ef,
-	0x681f3d62, 0x75e22fd6, 0x7f7f3ae8, 0x3efc3809, 0xe42a1c1c, 0x9ee18351,
-	0x919c5f57, 0x1551903e, 0x75da1f42, 0xb0f4e66c, 0x013cef56, 0x4cef1dfd,
-	0x55fd0cdb, 0x53071dc8, 0x24eb3e00, 0xd1357fbc, 0x26cbeec4, 0x2574fbf3,
-	0xdc3b06fe, 0xb34a4e37, 0xe1a9fde0, 0xe09d91df, 0xdd78fe17, 0x4f70316d,
-	0x5c3ff44c, 0x4efde1d2, 0xe4fb9e42, 0x57f0428e, 0xa26fb02e, 0x162685b9,
-	0xddf99197, 0xe5165f48, 0x891aaf23, 0x61a3f619, 0x6bde0368, 0x68cb4409,
-	0xc9938cb7, 0x313ba024, 0x561f716f, 0xfafb877c, 0x7c52ef70, 0x2814d89f,
-	0x0ed34b58, 0xdd620f4e, 0x0503cb13, 0xfc20960d, 0x16a65c45, 0x3c385b3e,
-	0x66c6f1dc, 0xcdbb17d0, 0x52c9fce2, 0x9f23d362, 0xfb666759, 0xe255d8e6,
-	0xc2b3edfc, 0xe11dd4b9, 0xf6063c18, 0x7932fbdf, 0xb17f2692, 0xe3470639,
-	0xc7d415fa, 0xbb58d9d7, 0xbf071e6e, 0x44b2a3ee, 0x6f8e5f88, 0xa66f1f0a,
-	0x5c73b124, 0x8beff72d, 0x1f7ab5ef, 0x42d58dc6, 0xf04176bc, 0x6bc695fb,
-	0x01fc788b, 0x27ad10e1, 0xef78d1fa, 0x7ab179dc, 0x0e4bfcaf, 0x3ebebe7b,
-	0x0fe22749, 0xcf4defd1, 0x0be3615b, 0xf9d8934b, 0xe807182a, 0x7dc37bc7,
-	0x4a7b85f1, 0xce45c913, 0x0ef3eefb, 0x889fdc55, 0x9f9f7737, 0xfd7e7184,
-	0x29fda5fa, 0xe15c6096, 0x92dff040, 0x86e5e6c8, 0xd082bf78, 0xdefb0aef,
-	0x8f1c4e37, 0xc147f3df, 0xbb45fd3e, 0x7feaf78c, 0x75374871, 0xd779987b,
-	0x5db83127, 0x7dc7af13, 0x1c47d233, 0x2f8cc2db, 0x35fb89ea, 0x76aa9ee2,
-	0xfccbbb7e, 0x10fe608b, 0xbc6e1c47, 0xc48e9ca5, 0x30c777bc, 0x99f7b87c,
-	0xed059ef0, 0x77bde317, 0xe257f8c7, 0xf1a9b0be, 0xd7b73b7c, 0x9fdebeec,
-	0xa6bcf781, 0x40c33b31, 0x728de0f4, 0xd8f504fd, 0x4a65699b, 0x06fac53f,
-	0xffb216c9, 0x410f452e, 0x7854ebb8, 0x23770fed, 0xfbf457e2, 0x4fbe61f9,
-	0xe702c389, 0xbe5c25b7, 0x8351d92d, 0x1f38affa, 0x8cb0fe7d, 0x139f17f1,
-	0xbcf927e6, 0xcff3c255, 0xeb211752, 0xf95a1f29, 0x88334164, 0x844925b9,
-	0xbec3175c, 0x46e909df, 0xf97c9fb5, 0x87ecfdbd, 0xaeae5424, 0x57280d20,
-	0xdd58fe56, 0xfbdc9aae, 0xb49fd067, 0xdce1fbfe, 0xb1d6272e, 0x479e8939,
-	0x2629ef40, 0xd61f20c5, 0x3185f93e, 0x1f78194a, 0x777ca69c, 0xaff81e98,
-	0x46aed319, 0x48bfa61b, 0x44963c72, 0xc927b7f1, 0x9ed20db5, 0xbdff59f7,
-	0x7e4cbdb5, 0xb9438d6c, 0x2efd64d5, 0x087975f2, 0xc0f7ebe3, 0x1e14093b,
-	0x97d31326, 0x720d7412, 0x5e2dea14, 0xf1e387a4, 0x6266aa6b, 0x74049ede,
-	0x29cbf71f, 0xefce3153, 0x800e9197, 0x4752a6f7, 0x3625d81e, 0x997bb255,
-	0xb3f31366, 0xf6317f7b, 0x0c837035, 0x0cbfbb6b, 0x8eb6c1ce, 0xf7b03efd,
-	0x7cfee8b4, 0x5a57e210, 0x8bf163ae, 0xfeff3a09, 0xe2f190d4, 0xe049bd23,
-	0x691f8f87, 0x388f38c4, 0x21af34b9, 0xcdca5e24, 0x9edbd171, 0x1ec27685,
-	0xb61bb083, 0xa8bde045, 0x8183a1da, 0x18435c8f, 0x1bdc459e, 0xdf5421cc,
-	0x8470a2ed, 0xbf914ba0, 0x19f24da6, 0x12fdf0a2, 0xded4e3f4, 0x0f984be5,
-	0x7ae7ea72, 0xf98983f4, 0x5c9abdc5, 0x212efe06, 0x364be69f, 0xfae34766,
-	0xfe223cfc, 0x5cd97f31, 0xb8f3274e, 0x923f3f1e, 0xb1297bc1, 0x5bbb4067,
-	0x474a24cc, 0xf2fcd4b7, 0x675c22b6, 0xf41a218d, 0x19f7e105, 0x6f08cf58,
-	0x653f72ff, 0xa58df765, 0x72743640, 0x62e7c286, 0xf9c030fb, 0xdd9b3bb2,
-	0x88c323bb, 0xee8cfc03, 0x81b7c37d, 0x8834c27d, 0x7f29aff9, 0xa3e49732,
-	0x73866d5e, 0x44afadd4, 0x2f22f8f0, 0xc8ec4fbf, 0xfa9cf883, 0x8c7cb4aa,
-	0xc01a3913, 0x0dba3777, 0xc7dc0cfe, 0x5448ef94, 0xf2da0e36, 0xb87a19fd,
-	0xf54299af, 0xd92f9a35, 0x0fcb2f72, 0xd1d4aff5, 0x4f2d92fc, 0xfdd3d0cd,
-	0x7fc6bee1, 0x5b35f20a, 0xbe7cb176, 0xf34ca57f, 0x655e5bcd, 0x4960e1f5,
-	0x2dc1ec09, 0x68786707, 0xb9a267ff, 0xf1fbb7bc, 0xe5fbb59e, 0x3b50bae1,
-	0xe332636b, 0x9db8675b, 0x59264cf8, 0x1ef0055c, 0xb2febe11, 0x5a0f1d64,
-	0xac54c569, 0x4927b457, 0xf325dbe1, 0xf7e56e71, 0x924627a3, 0xb7e60896,
-	0x3c5144f3, 0x8e18e81c, 0x93afc77e, 0x6e9e9862, 0x38fbe3f3, 0x4f011fa2,
-	0x77189fd1, 0xe067c835, 0xac789acb, 0x3f8664ec, 0x1c46ce3a, 0xdd839867,
-	0xcb4aae2b, 0xbc51fc03, 0xf4de39e9, 0x8dbbfcec, 0x1bf68fcd, 0xa0728b9d,
-	0x07f8ec00, 0x33f5a2be, 0xd2d6f383, 0x93324149, 0x3136b72f, 0x3a206b7f,
-	0x6269e90b, 0xa5677f24, 0x668ebd50, 0xe4c6870e, 0x466f7e68, 0xc2512bc0,
-	0x1c389a71, 0xcf78fcd3, 0x5dd74af2, 0x775a1ff1, 0xf01cbe08, 0xf681ca5e,
-	0xf5b3b7ab, 0xcd7bf0c4, 0xd4188cfe, 0xf557eef7, 0xa6836677, 0xb8c1097d,
-	0x164c7736, 0x8227bfb6, 0xd93bf198, 0x332ed7de, 0xa0ade997, 0x2c778acf,
-	0x123ae788, 0x7bec47ea, 0xc58da2af, 0x39d70667, 0xd3af90a3, 0x6369d7c6,
-	0xe8aaf4eb, 0x64091c95, 0xa7f6b6cc, 0xf7f83ee3, 0x9f2a37f5, 0xe7daa7f7,
-	0x7d83fae1, 0xd65e103d, 0xd6f93a73, 0xa9e622f0, 0x9c1f6781, 0xf013f335,
-	0xed8dfd84, 0x52e9a946, 0x5926b3cc, 0xfb35939c, 0x8e1bf33b, 0xd5daca57,
-	0xb9e2cedd, 0xeba6a289, 0x3a99ddba, 0xed102b88, 0x1027c16a, 0x3dffb41f,
-	0x89edcc9a, 0x806d2469, 0x93c7c4f8, 0x0ddac28b, 0x9cf6bbf1, 0xe2cd13d8,
-	0x8af6b5d5, 0x277b789e, 0x9cf4afdc, 0x8c0aef63, 0xc06fd8d3, 0x259cf4cf,
-	0x5f282ed8, 0x9c73f9d4, 0x3fb7f63f, 0x7e603205, 0xe7b2a685, 0x47d53b15,
-	0x7e431cb6, 0xecb8385d, 0x7f9a4cb6, 0xc88ff935, 0xcb530bcf, 0xfca4c8be,
-	0x9fb27f7c, 0x7d9647e5, 0x5bf21431, 0x44feacfc, 0xefc0f3c7, 0x633fc789,
-	0xaf507252, 0x41592d78, 0x3ae5c9b8, 0x02647402, 0xc7ae8625, 0xe309aaf4,
-	0x075c04f6, 0xba4d0b4a, 0x6ff77086, 0x07a3eedf, 0x812957e6, 0xf3b0153f,
-	0x5f803b71, 0xf403b2af, 0xdf7bb144, 0x8eff7b3d, 0x483e5df7, 0x1e027576,
-	0x16bb23ea, 0x5dfcd265, 0x1fa09f91, 0x3dd0724f, 0xc515f601, 0xf9d01646,
-	0x9c9b5d4a, 0xd5913fa0, 0xe11eb376, 0x745eedca, 0xfc28178d, 0xf3f7d95e,
-	0x61b2a5ef, 0xb18f309c, 0xefd40f9c, 0xe06ff2fb, 0x633fadf7, 0x7af983b1,
-	0xdb96c76c, 0xdb1aff40, 0x4c97f6f1, 0x39fbb30e, 0xc163de62, 0x97bf49ae,
-	0xfe709bb4, 0x5eae3b63, 0xfdc7f501, 0xe80b23b6, 0x5f31c264, 0x9e85b013,
-	0xaaa52fbd, 0xcf90e5ee, 0x39d71a2e, 0xc04ddfa0, 0x54aa53e3, 0xf478460d,
-	0x857c7832, 0xf1dd67f1, 0x68fd9b87, 0x7fdf54fc, 0xfa3afaa2, 0x20c97b91,
-	0xc433f83b, 0xbdad7a7d, 0x5d2568f4, 0x213efd1f, 0xa2106740, 0x6f3c4f4f,
-	0x98248ca6, 0xaad1252f, 0x5939b97c, 0x96c2bf55, 0x929f2aa9, 0x7caab574,
-	0xcaa7929a, 0x56311f4f, 0x7b06ff55, 0x637f2aa9, 0xfd5534c9, 0x2aa5474a,
-	0x536be79f, 0xd4382fd5, 0x423f2eae, 0xfe43c064, 0x90ebfb51, 0xa0749d16,
-	0x74f8b5d9, 0x8e90ebc3, 0x87030bfd, 0xed7c5ed6, 0xe1d7b6f9, 0x6b17b0bb,
-	0xfb0933ef, 0xc5b2cdf1, 0x276f0c6b, 0x0567d24e, 0x75901fdf, 0x18d33eec,
-	0x94eaebab, 0xa67de0a2, 0xa62f6089, 0x7c58a848, 0x00e347ee, 0x3d980b4f,
-	0x062028ed, 0x68adbee3, 0x686a3c87, 0x2c0fe678, 0xf81d200e, 0x5cc084de,
-	0x9e27bad5, 0x5dd6a977, 0xe0d56e4a, 0x5f2a8d69, 0x555dbb61, 0x06d24a7f,
-	0xe534f955, 0xdd3c1a07, 0x60dfcaaf, 0xd3c1a2df, 0x7e9e0d36, 0xf4172aae,
-	0x5aedc1dd, 0x451ec0fb, 0xcefef1d3, 0x75c3c072, 0x8f8803a7, 0x72d6ce92,
-	0x47b5d3c0, 0x855f10db, 0xb039673e, 0x0d43e2cb, 0xa3ea43af, 0xf76831e7,
-	0xa612635a, 0xb4151a07, 0x1c6c1d6b, 0x46a1e981, 0x75ff7e3b, 0xefa60963,
-	0x7d303a34, 0xa62a71af, 0x4c4e8d9d, 0xb0db1adb, 0xed8d73fe, 0xdb162ecc,
-	0x3a45def7, 0x75ba07d8, 0x8278377e, 0x77923f17, 0xeecbf003, 0xc86efe41,
-	0x37ec45df, 0x25f9a24c, 0xbee844c0, 0x374f29fc, 0x80023aa4, 0xca1c3757,
-	0x18f1828a, 0x1e473a6d, 0xa477e1e8, 0x3ea1f84c, 0x37bb909d, 0xd16c9338,
-	0x79a66f2c, 0xb3c63644, 0x83a1f84d, 0x2033d712, 0x33a9d04a, 0xf7c806e1,
-	0x7772b044, 0x401b84ca, 0xfec6ff0f, 0xff3f4773, 0x61291df9, 0x9ccfe7fc,
-	0xd760ac56, 0x70d5fc39, 0x30e3c02b, 0x48396fb7, 0x4d09619e, 0x0679f54b,
-	0x0747b390, 0x80f0b7b8, 0xe009b4ae, 0xcfb3a6d0, 0xebef78c1, 0xb7e8040d,
-	0x5fe7624a, 0xca95cf51, 0x0dcf41e4, 0x1d4f3c26, 0x605639d1, 0x7814995c,
-	0x3dbce00c, 0xdee112a5, 0x00640d63, 0x4e29bcfc, 0x3c0f8f96, 0xf243d926,
-	0x079f0606, 0xb6fc6e52, 0x3858f3e1, 0x62913cf8, 0xcfb6fa63, 0x807a0e91,
-	0x74a91fc8, 0x3e7ec1d4, 0x0ab8ea52, 0x4d38cfef, 0xad3aff6c, 0x3ed0abde,
-	0x139a28e4, 0x9219e762, 0xd1f7606a, 0xd82262e1, 0x71916f3b, 0x39e16b9f,
-	0x7be99521, 0xce702748, 0xe789179c, 0xf63a2382, 0xfeb6819e, 0xb3d70e02,
-	0xe3dbc283, 0xbd32a616, 0xdd566ca2, 0xfed02f33, 0x6045d67a, 0xe1ce3dd7,
-	0x34f58fa8, 0x342ae850, 0x8e70dd3d, 0x1cec9b95, 0x9dbfe824, 0xf2d17f0f,
-	0xfb6e3a67, 0xfd68efeb, 0xda45d64f, 0xaed88651, 0xc2ddf841, 0x358c2f2b,
-	0xb0b4fea3, 0xe40cbd2a, 0x07ee7ce2, 0x27d5645c, 0x1f503ba0, 0x1727846d,
-	0x9af25b97, 0xcac90429, 0x3c234ab8, 0xb69d5525, 0xd5d219a6, 0xc237eec3,
-	0xa3b52913, 0x1a833576, 0x70b7475b, 0xff3ff211, 0x5e748dbb, 0x0acbd78b,
-	0xfb89cf3b, 0x145735ae, 0xf7e822cf, 0xa23b8f08, 0xeaf3c040, 0xd16f0e22,
-	0xd787116e, 0x3fae1489, 0x0b9c90e6, 0x67d63f6a, 0x0b5def40, 0xc01ecddf,
-	0xe72ea0cf, 0x4607e3fa, 0xfdf6ae36, 0xe2ee3112, 0x3afe7654, 0x0994a462,
-	0x4c2de4fa, 0xfdcee40e, 0xba22aee2, 0x9b0edcfe, 0x1615e30e, 0x7800bdd7,
-	0x78e76de8, 0xd8769034, 0x4b3cb34f, 0x221df93e, 0x8f754e26, 0xd2f252f7,
-	0x0f2b69de, 0x7e859795, 0xbca87967, 0x96b4092c, 0xf2145c83, 0x7d4ff851,
-	0x2f9cd58d, 0x3d3f2037, 0xf31eb8d0, 0x983d1b07, 0xe16c6a1e, 0xcb15b97c,
-	0x987c69df, 0xe72f65f3, 0x7bf13bcb, 0x4c5ce347, 0x58ba35f7, 0x9519ca3e,
-	0xecc4fb0a, 0x37c4f8c2, 0xf80898b6, 0x4c3b7ae7, 0x77419f18, 0xc68f63c4,
-	0x0991fc41, 0xe36a71ef, 0xbe7cb490, 0xf7761e8f, 0x0525377b, 0x1f8be9c6,
-	0xc8717d02, 0x9874f4c0, 0x4be05628, 0xe4fe8ff9, 0x0fafd006, 0xf4158a2b,
-	0xcdd482e9, 0xac50ef2c, 0x7c2f9a06, 0x8a5de794, 0x22ac04d5, 0x5be421f5,
-	0x358a3d87, 0x1f8be682, 0x7b95887d, 0xc7f33a09, 0x06f5ba3d, 0x2259f00f,
-	0x51fd801d, 0x449cce6e, 0xd79505c5, 0x5f6007a5, 0x325a494c, 0xcec5f609,
-	0x63e90514, 0x00e1b29a, 0xd88fa7e4, 0xfaab87a6, 0x46de4b0e, 0x57165768,
-	0x937687a9, 0x846cd6d2, 0xdd879376, 0x376d0faf, 0x8daed475, 0xdf619f90,
-	0x74fd07a6, 0xf8b1f027, 0x2f223f60, 0x169f05ca, 0x3ba37271, 0x720f289c,
-	0x0f289ddb, 0x66ca5c04, 0xf60dde57, 0xc976facf, 0x663cc126, 0x0a417d4b,
-	0x86e89310, 0xbf2949f7, 0x97f53ebe, 0x5db40dd6, 0xc5afe43d, 0x7c370ffc,
-	0xa6fbfcbb, 0xfbfc30d4, 0x41dfbe43, 0xfbdc43de, 0x0ef64687, 0x2e1c33cc,
-	0xac4b1df5, 0x712a8ef8, 0x7acf4159, 0x97f3cb9e, 0x9fe5a520, 0x7f8bb4f1,
-	0x70e7407f, 0x52ab38c1, 0x3fb21fb9, 0x6549a87f, 0x8f735ffb, 0xce728064,
-	0x6d52ea1f, 0xea3cf7aa, 0x76bfbb08, 0x6d3b38a9, 0xee36b89c, 0x3b693564,
-	0x1fecc8e8, 0xf70b526f, 0xc7fab2dc, 0x6a788b7f, 0xdf781c6d, 0xe3106ab9,
-	0xd78173a7, 0x496eba50, 0xde4f901d, 0xdc38097b, 0xfd0e0e1b, 0x9c5843d6,
-	0x2438bf7b, 0x5daeef1e, 0xb3c57117, 0xfc798d77, 0x827d76bb, 0xafaffa2e,
-	0xcf5fc195, 0xbbf54fe0, 0x157e60c7, 0xec04ad8b, 0xe7fca156, 0x3fe11777,
-	0x6df67e5a, 0x179bc9f1, 0x65bbe1d7, 0xf3d8f861, 0xb898f8e1, 0x854dafcf,
-	0xf3f70a9e, 0xde121e20, 0x7e738239, 0x1f6ba265, 0x1653d3f4, 0xce0e9bf8,
-	0xddec71a1, 0xaed183f0, 0x325df0fd, 0x1106b8b2, 0xe75a7c97, 0x6de815f9,
-	0x19fa3def, 0x106eb3f2, 0xbc8f7416, 0x97a0f341, 0x7ce6c3fd, 0x4647e013,
-	0xefa18df8, 0x7f140f8f, 0xff2e1bfb, 0xdf6ca7fa, 0x9ed43889, 0xa0665f6d,
-	0xfb12eefd, 0x54782062, 0x70fde3c8, 0x24b7a43f, 0x9767e512, 0xdef07c44,
-	0x02695771, 0xe95d2dea, 0xdfa43d46, 0x2bb8b9f6, 0xd7fb1b3d, 0x92bb8f9e,
-	0xdc6ccc4b, 0x7d2153c9, 0x2154f92f, 0xf0dfbdc8, 0xa376cbf8, 0xb03de0a7,
-	0x408d8f0f, 0x928dfeff, 0xa0e010bf, 0xbd77573d, 0xc94ca0b5, 0xa6be7fed,
-	0xeb049beb, 0xbbae3dab, 0xe95dbe1b, 0xfd76bb79, 0xb9c408df, 0x15ff5b8f,
-	0xaeeff781, 0x19ddfcfc, 0x5e80ab93, 0x12026ae1, 0xf545d319, 0x54bf9a09,
-	0x8939d6fc, 0x4333d39e, 0x6f25e5ce, 0x9e2e38b3, 0xfde7cf6a, 0xed5c09de,
-	0x960dc751, 0x5e308afa, 0xe147f645, 0x7b1d60bd, 0x73c4436f, 0xf3cfc9bd,
-	0x243ebcf4, 0x9d70ed0d, 0xfaf3aa19, 0xfa2d1f1d, 0x0881f21e, 0xa678ef8c,
-	0xcc3c44fd, 0xf19d8ff5, 0x0945793f, 0xedbd77d2, 0x9df4246f, 0xbdf5dac0,
-	0x86d77caa, 0x7056fbe0, 0x5ff6ab1f, 0x2a25ca32, 0x4f105ac7, 0xdae335e4,
-	0xda4af910, 0xef07dcfe, 0x55df94d1, 0xbe50c002, 0xd074cf36, 0x3cfc9576,
-	0x8de44844, 0x92aeda0e, 0x67891f9f, 0xe78f2b25, 0xb09f3df5, 0xff28ba7c,
-	0x7fac4ce3, 0x1c6fe895, 0x79164f2b, 0x22d5dfde, 0x9623789f, 0x25f68a67,
-	0xc6239f2c, 0xaded64af, 0xade4feac, 0x7a099cff, 0x33f7e08d, 0xe09cb8d2,
-	0xfe5152ef, 0xba2b4cef, 0xba8ebc68, 0xf107cb9c, 0x1dc5550e, 0x85df22d3,
-	0x6126dc7d, 0x9ded61ec, 0x9fe7b406, 0x0dcb698d, 0xe22f2fbd, 0x56e59c7a,
-	0x7baaf38c, 0x9976f871, 0x1e813bc7, 0xe9fb9cb3, 0xfa0b642b, 0x65ef7a61,
-	0x3d207e7c, 0x97fae570, 0x57ecf855, 0x46d3dfce, 0xef1d2547, 0xf1130fdc,
-	0xd619027e, 0xee02f189, 0x27c44934, 0x116abde0, 0x45971757, 0x8e7e701c,
-	0xbd82297b, 0x13b27aa7, 0x97caeff9, 0x6ebb7d98, 0xef28ebcb, 0xda0aca96,
-	0xea1ebe97, 0xe9f0075a, 0x2f77b2b6, 0x87dfae57, 0xc531f4fb, 0x8160fdc6,
-	0xbcf0a151, 0x3dfc3fb3, 0x8517f169, 0x3ffcbabf, 0x5dad7f0c, 0x5fd7dc5d,
-	0x7ff1857d, 0x07e656dd, 0xfd3c73b6, 0x7314a749, 0xf0023d78, 0x33a2b73a,
-	0x20865a3b, 0x778c4eee, 0x29df90ab, 0x6f56f382, 0xde009583, 0xdccea5bb,
-	0x5fe0c30f, 0x9f38ae7b, 0x69715441, 0xf7c3fb3b, 0xf7d04be9, 0xfa4dffd3,
-	0x8dfbd44e, 0x1f1bf076, 0x15e5ef65, 0x18c9fe77, 0x4ef41f1a, 0x0f073b1a,
-	0x317e676e, 0x2c171711, 0x713c32b7, 0xd55d53ff, 0xffc1e33b, 0xc4c3f624,
-	0xfe06d248, 0x76d74a04, 0xa076d74e, 0x41bf416b, 0x176d143f, 0xfa41be06,
-	0x912e2c25, 0xfdb7e9c3, 0x25e1fae1, 0x7fe1fae0, 0xa9bbae13, 0xdbfe8c3e,
-	0x4ed02217, 0x3ff385a3, 0xbc055c38, 0x0e2fd323, 0xfff4c8e7, 0xd3239c0c,
-	0x439d9515, 0xf9207bc0, 0x988fc5a4, 0x5a7d9877, 0xe9f64df4, 0x4f9c1923,
-	0x8f18fde9, 0x4c7bc5ab, 0x27bc3f7a, 0xef1c5fa4, 0x30fff2ea, 0xd370b5de,
-	0x9fdcb5a6, 0x985efdab, 0xfbbf203e, 0x7ff8e056, 0xb0b04fcd, 0x7caabf61,
-	0x54b7faf1, 0xef3c4be5, 0x415f965f, 0x5bfffbd8, 0x57e105fe, 0x2afcf998,
-	0xb51ff81d, 0xc43741f2, 0xc7a023f9, 0x7afe5f1b, 0xf93087d4, 0xb78c6cea,
-	0xe5af8dba, 0xff7ff18b, 0xbe947be4, 0xf66068be, 0x3ffb63d6, 0xfd392837,
-	0x79e165e9, 0xd084711d, 0xeff5c2d9, 0x5acf401b, 0x54fbd848, 0xa60ffada,
-	0xc6307b33, 0x30be5149, 0x710c4cd7, 0x9dcc1f94, 0xcf4beecb, 0x0c630705,
-	0x2d173ea6, 0x3e27a99f, 0xd2bb8f78, 0xd099f7a2, 0xffbea9ef, 0x75efe26e,
-	0xd558b893, 0x21d9783d, 0x9cdf9c63, 0xbd2fe612, 0xf786d2c5, 0xba1de787,
-	0x60f7dceb, 0x14f46f2f, 0x7177b8b1, 0xbaf7f0ff, 0x3e83f12b, 0x9c2a7a08,
-	0x5fee24fb, 0xff40635f, 0x2addb6ba, 0xca669fbe, 0xd9a38b12, 0xc533e2c3,
-	0x3beba4fe, 0xf767ca64, 0x48f7e060, 0xbe0c1b2a, 0x67a0b9e1, 0xbb3d47ef,
-	0x2e4364be, 0x927eafe0, 0x1b94dc74, 0xafd4ef3c, 0xd7b60bff, 0x7a6d67f2,
-	0x4fd5f6b9, 0xbd210f1a, 0xb1d17388, 0xb5e61f46, 0x1305d6f6, 0x93fd17ff,
-	0x6de2ff63, 0x57dc7482, 0xd0c70f8e, 0x3b1bfb75, 0x827b2dff, 0xbb0823b0,
-	0x214ed682, 0xbf7888f8, 0xe36e97d2, 0xa296b2ef, 0x59e883df, 0xc1edf82a,
-	0xd7f9fcfe, 0x27d717e9, 0x61ffe5d5, 0xf4b97cfe, 0xe4c49b5f, 0x8fee96aa,
-	0xed0cfd56, 0xb5be82cf, 0x6200bff4, 0x0bf8e852, 0x27bc25ea, 0xab55773e,
-	0xcdf49c61, 0xe5b57de9, 0x9b830664, 0xb15c2e46, 0x3c78503c, 0x0be78c87,
-	0x0ec6bc93, 0x87810f76, 0xefd5d3af, 0x48bc5303, 0xab971719, 0xfafff2ea,
-	0xa2e4e039, 0x8917266f, 0xcb489f4a, 0xe56eb7e8, 0xfe56eb12, 0xb90eeb9b,
-	0xd648b4a7, 0x40e3ef05, 0x81c435fc, 0xfdd978f6, 0x56ccead4, 0x5203ddfc,
-	0x7e028812, 0x995eeb77, 0xde8e9efd, 0x790e4fa1, 0xf88bad3f, 0x5c7a003e,
-	0x3bbd9e35, 0x769b8da4, 0xd5ea78f3, 0xbf78dd96, 0x9a0efb51, 0xf376cb88,
-	0xa1efb4fe, 0x9de2f689, 0x687bed03, 0x1c783253, 0x67c93e76, 0xe7172971,
-	0xcf20dda3, 0xdd35fc43, 0x5da2355f, 0x4ac7c6e1, 0x05a4f3ee, 0xa32732f1,
-	0x9799df1f, 0xa3be7171, 0xd32fff2e, 0x81dd6caf, 0x94aed8f7, 0x3a64477e,
-	0x827f40dc, 0x9bf1f72f, 0x6fc84c57, 0x3df33bc4, 0xf7c19e6b, 0x24be7a87,
-	0xd4bd97e8, 0xbb13e33b, 0x09c435d8, 0x564dbd27, 0xc771d78a, 0x1baf683c,
-	0xf785c47b, 0xe3bcc776, 0x927f8880, 0xc329c077, 0x233e85bc, 0xff209bf4,
-	0x78d9f7e2, 0xf2e5d59c, 0x37f52bb9, 0x8cfca7fe, 0xb75d5ee2, 0xbf0457c1,
-	0x13d9e0e7, 0xa103bf81, 0x1993ff9d, 0x93be8bba, 0x7ae511dc, 0x8b34f012,
-	0x5ef109cb, 0xdecc8572, 0x94edef49, 0xeeb85ed1, 0xabfb7e7f, 0xdb4b9547,
-	0xbd6dea15, 0x2265cf61, 0x7bb1d7ad, 0x0ae5f92d, 0x79c249c6, 0xc287ec0d,
-	0x7fada89e, 0x297b294a, 0xe35bed03, 0xdeda3df1, 0x067cd987, 0xfafd57c2,
-	0x603f8e00, 0x7ebf1f39, 0xf42d916f, 0x19f3959d, 0xdb43e77d, 0xdf107329,
-	0xff174b97, 0x332dced7, 0xa891e265, 0xbc91cd7c, 0x4c25ef4c, 0x3a405dff,
-	0x02445d31, 0xbb08ba98, 0xd894b0cf, 0x9c4e5d31, 0x5c55ae98, 0x3718195d,
-	0xf8c04814, 0x39ff17d3, 0xdce6e80a, 0x215ae375, 0xf2dbf146, 0xbef56923,
-	0xbd853c9e, 0x3fc2f497, 0xd9f4077f, 0xcb863ff3, 0xa2471be2, 0x1848641c,
-	0xa57bd33f, 0x54d7bb32, 0x17dc5df2, 0x325dfde2, 0x96e1f989, 0xfee26627,
-	0xc4cdf209, 0x826f826d, 0xb8e7393f, 0xdcc3c58e, 0xc67be12a, 0x6e1d7eed,
-	0x99159cb1, 0xb9ddf85e, 0x3cacddf6, 0x2bda2ea7, 0xd8ce7cd1, 0x26be5608,
-	0x4ff70bda, 0xee3f1216, 0xfb70c5cb, 0x4bfb8644, 0xdf8a2f8c, 0x8227a00b,
-	0xbf6d12a1, 0xeeccc3a2, 0x30ff1051, 0x70b9ffe0, 0x4f170a7e, 0xf1f18433,
-	0xbf1943d1, 0xb6a65d1f, 0xe5e50c87, 0xdf6529f7, 0x0cb47807, 0x810d6471,
-	0x9b9d31fa, 0x3b042c1e, 0x9f808e90, 0xb7b1b3e6, 0xb4535fa3, 0x1b29517b,
-	0x959ff501, 0x67bfbc58, 0x4c6fbf2f, 0xfea10902, 0x794ab5b1, 0x1a2bd42e,
-	0x40d3f8c2, 0x51df8570, 0x2f398674, 0xd1d1f88a, 0xbb436670, 0xd277c13c,
-	0x7e58959e, 0x6f5be3f2, 0x5f4168dc, 0xe3f40782, 0x44d71517, 0x91b46f18,
-	0xffcc0b10, 0x1b7efca7, 0xbb00c869, 0x4cc7aae8, 0x3e2fd03a, 0xee18e2a2,
-	0x9e81fcf7, 0x98fd21b7, 0xfd219b9e, 0x43373d23, 0x9b9e9c7a, 0xcf413d21,
-	0x38ae90cd, 0xccc7876f, 0x8e2189c9, 0xf0bfd0b9, 0x5be769f7, 0xd7f18439,
-	0x1af7f1be, 0x14fbfc71, 0x0fb7c217, 0xfe087bdf, 0xd1b3edde, 0x8b989481,
-	0xdecf5bd0, 0x749fa3bf, 0xff08b820, 0x0a7cb6a3, 0x6eee6bc7, 0xdcffca3d,
-	0xcad47f76, 0x872b7a90, 0xce7db118, 0xa0a3270b, 0x1f5b6eff, 0x5d121d7c,
-	0xcb1d4cf2, 0xb9fc7caf, 0x828e371b, 0x0fbe3bf9, 0xf9f74174, 0xdb73486a,
-	0xfc00fb7f, 0x1fed2a5e, 0xa47a24e3, 0x2f3c66c0, 0x85a1d668, 0xb3d75883,
-	0xa09b9dd1, 0x0c2fb3fd, 0xbe509585, 0x01bed843, 0xadc2923a, 0xe7ae0377,
-	0x10a05346, 0x78dd0bee, 0xa71b0e41, 0x8a529f7d, 0x7a064e70, 0xcaddfe43,
-	0x025f4653, 0x7f74df6f, 0xe223fb6b, 0xa5e015fd, 0xafa5c80a, 0xac2f40a2,
-	0xed04f1e4, 0x06fd87bb, 0x2439e9d6, 0xdabdf813, 0xfdea31d1, 0x49e38bb7,
-	0x8d7b39a4, 0xb3d7c04e, 0x830d4f7b, 0x7e2989f7, 0xc57bc186, 0x455c86db,
-	0x31ef7f42, 0x8f97ec67, 0xf587183c, 0xe769f7f1, 0x10156d91, 0xbcdf3337,
-	0xd2580dff, 0x0af1db42, 0x9c599b88, 0x74841d24, 0x19399289, 0x7dc465e2,
-	0x4a236583, 0x9a96c20f, 0x7d44af61, 0x4c9814ae, 0x37287c88, 0xd847f247,
-	0x558a3c85, 0xa524a7e5, 0x534feaaa, 0xd3e554b2, 0x95548c47, 0xd867718b,
-	0x46f5540b, 0xc28604c7, 0x83ae8e79, 0xa4ff03bd, 0x3986f18c, 0x7eb91c2f,
-	0x7ccfcd24, 0x43be0e6a, 0x9f2f2cf9, 0x17b95cf9, 0xe143d1f0, 0xd50aa469,
-	0x6c1f92e9, 0xd33a107e, 0xf76a179c, 0xa1d0713e, 0xe179c65c, 0x8184e712,
-	0xed164fde, 0xca04e7b5, 0xbe001f37, 0xd9c5fa39, 0x3edbf036, 0x14cbf63b,
-	0xcdfd4788, 0x0caefe10, 0x440c3f3f, 0x43fb7d37, 0xbcdd1852, 0xc3279325,
-	0xf2440dd0, 0xe9643a32, 0x7eecc3cc, 0xb5f295de, 0xa1af814f, 0x4243c0bd,
-	0x6b577f7f, 0xb46d1bdf, 0xb036e6ff, 0xc32bbd47, 0x7bbea50d, 0x6fe12b93,
-	0x64ef4839, 0x93bbb6f9, 0x07bbf0e3, 0xb73761f4, 0xb8520df7, 0xffbb553e,
-	0x60c2e4ee, 0x5c775939, 0x29dc9f55, 0x1bf2ab35, 0x7bf9d533, 0xdb439b4b,
-	0xad8fa40f, 0xd189787c, 0x6ef70395, 0x37bfb0a5, 0xfff3e62c, 0xd5800901,
-	0x00800020, 0x00000000, 0x00088b1f, 0x00000000, 0x19b5ff00, 0x6554540b,
-	0xcef7bbfa, 0x7860190b, 0x77421028, 0x840a4498, 0xb0285789, 0xd71ea08d,
-	0x8f4c1ada, 0xe5935654, 0xe04d7903, 0xe3d8f4b6, 0xb68fad18, 0x695b6d07,
-	0x9656356b, 0xb139e4e7, 0x36254644, 0xeb495bae, 0x66a254d6, 0x42d899e4,
-	0x7a26704c, 0xf75a9d6d, 0x5efffefb, 0x5b602e67, 0xe74ed69d, 0xffffef9f,
-	0x27ef7ffb, 0x70ca1490, 0xf60800ce, 0x9970ccac, 0xd6f70601, 0x8018e41a,
-	0xe2eff4d3, 0xf9b8daf0, 0xcf03837a, 0x3a380057, 0x01cfe3cc, 0x031401d6,
-	0x7b81295c, 0x5914f3a2, 0xff60e760, 0x2fbdf165, 0x00490801, 0xde8d179e,
-	0xe38456ed, 0x6e67065c, 0xf08d9ef8, 0xd918064e, 0xbfefff72, 0x25f5c22a,
-	0x8c0ee3b0, 0xbd0d43c4, 0x5c75d79b, 0x9fcd7114, 0x77d1d704, 0x98809679,
-	0x55706b80, 0x00e207b4, 0x3c636a9a, 0x679e3e62, 0x2e990e86, 0xa6f1c804,
-	0x01529bb5, 0xc0228a8e, 0x78074439, 0xe3ef14a0, 0x245f041b, 0xa4ef39a7,
-	0x67c8b9df, 0xe7c72fcc, 0x35b03245, 0xe99432bf, 0x7ed77bc6, 0xbf1ce787,
-	0xce91a203, 0x8f4a803f, 0x2e5c4c03, 0x19bdbb04, 0x3f233ffe, 0x1812bd4d,
-	0xf0619f90, 0x605aba1d, 0x25a9ccd7, 0xa7e92b00, 0x061dfb4c, 0x196fd890,
-	0xb2957f70, 0xe57cb2bf, 0xf08b10a5, 0x2040fd56, 0xa70fbd9b, 0x7fd5fff1,
-	0xf198376f, 0xda53f57c, 0x530f427d, 0xfbe52f90, 0x77b3f03a, 0x3de277eb,
-	0x235ef853, 0x8499fddc, 0x697636ef, 0xc7245fbf, 0xe0e60d24, 0x3828028f,
-	0x916db12d, 0xf1366bde, 0xdf4ae6f7, 0xea097bbd, 0xc925e9b1, 0xd1adc46e,
-	0x00e2d3dd, 0xa83983f9, 0xf2f1d4e4, 0x7a8cda6b, 0xa7c30c2a, 0xbdf34b76,
-	0xca175f74, 0x5e319ea8, 0xe2c960ce, 0x5f1c2cf8, 0x0bd7c573, 0xf735f101,
-	0x7ed0d0e8, 0x1146cf00, 0xcf3c08e4, 0xf2ae31ed, 0x07f4c39a, 0xfcc79c2d,
-	0x66132f9e, 0x1d75f2e7, 0x1ced01d1, 0x98bf702f, 0x093e8021, 0x60b541f1,
-	0x5f4b8edf, 0xc925724f, 0x9f004fbf, 0x589ec05c, 0x5cfd4264, 0x7da39fc1,
-	0x8fe02433, 0xe11d6c94, 0xfdc8a859, 0x7c7fd28a, 0x8b77e023, 0x434f167b,
-	0xd750e00a, 0x0cd43eb2, 0x0c6d906c, 0xe8f012df, 0xf17d2f49, 0xa416f4ce,
-	0x604932f3, 0x1f17dff6, 0x7f10161a, 0xd0b4455f, 0xeff7b026, 0xbe55f7a4,
-	0x74cef4fa, 0x8e6be337, 0x26f51065, 0x4e902e38, 0x47978f47, 0x183aae58,
-	0x712bf554, 0x9c7f2177, 0xfb3edd2b, 0xd1dbf412, 0x223160a5, 0x684b97bd,
-	0xabc30838, 0x49ab8fdc, 0xae5133d6, 0xe8813f82, 0x6e17966c, 0xe4bbf191,
-	0x97417bd6, 0x1d372118, 0x2f5533f7, 0xd3c71caa, 0xf72de2a1, 0xd1bf903b,
-	0x9fb3021d, 0xecccbb46, 0xe4fcb1b3, 0x7f104b83, 0x0bb25fa3, 0xeeb2cf48,
-	0x7e4847bd, 0x403b6b1d, 0xe7401e77, 0x2eb66eda, 0x527d9933, 0xd98be31e,
-	0x414688ad, 0x6056ad7c, 0x7c35a7c6, 0x0c7be61e, 0x7c3f51bc, 0x3804ce06,
-	0x9e7ceb18, 0xfbf35bf8, 0x1096fbcf, 0xe3ca1bb5, 0xad901f99, 0x3fa61b9d,
-	0x466000df, 0xa3db43fa, 0x3c304fbd, 0x6125af68, 0x27b13d7b, 0x9e0b70eb,
-	0xcf53789f, 0xc55f75cc, 0x416ea7c3, 0x68f6cd78, 0x0913e726, 0xf3a549e0,
-	0x3d7ba627, 0x18a56178, 0xb9216fea, 0xb7d8c677, 0x47f1f9e3, 0x13bb3fa7,
-	0xa767dae1, 0xf24c89d9, 0x7de5191f, 0xda011d3c, 0x7d953e7f, 0xef1c2907,
-	0xa52fc50a, 0x57dc6667, 0x24cfe74e, 0xaa8f09da, 0xa347a1bf, 0xfaf2801c,
-	0x16797c12, 0x8293bd34, 0x87c45067, 0xc79dc4eb, 0xdbcbb404, 0xc483ae0c,
-	0xfe47eaf7, 0xf90ca87a, 0x37e67aa9, 0xfa44cf0f, 0x0c9bdf6a, 0xaf584ef4,
-	0x6c40e2e3, 0xdffc9720, 0x915ffdc6, 0x288edd4f, 0x7111c7cb, 0x5e23a1a6,
-	0xa7753703, 0x888e3e5a, 0x65c07537, 0x8e82f50c, 0xfc57a9f8, 0x1d745eaa,
-	0x201aba25, 0x8422e3c0, 0x0557640c, 0x78a0e092, 0xc8c7ba10, 0xced63fe4,
-	0xd1916546, 0x8b822f51, 0x224179e2, 0x6fc85298, 0xc17e5c5d, 0x713fa67b,
-	0x9266ca17, 0xfbf54135, 0x223385ac, 0xf1bfb3ed, 0xcdcfb215, 0xc39f6646,
-	0x8d2f3c51, 0x391ff3c5, 0xc2bf7d9e, 0x87f305f4, 0xf5a4f933, 0x17385adf,
-	0x0aef141c, 0x9bc2e4da, 0xf4516d70, 0x29c52c72, 0x1dee4958, 0xc03aeff7,
-	0xe6f5b9e4, 0xbf7784a3, 0x0e0fe999, 0x0507b970, 0xf7d5279e, 0xa0429856,
-	0xb77a242b, 0xfdd57a31, 0xf3872dc1, 0xe0fef85c, 0x8079390b, 0xf24cbcf6,
-	0xe505fe0f, 0x7fc62a73, 0x3b5c36ec, 0x853bbff7, 0x7a58e0f2, 0xd9475beb,
-	0x2c3c2a7b, 0x4f5438f0, 0xf7fee07c, 0xa264ce99, 0x8b08c313, 0xcd77030f,
-	0x2b9bf260, 0xfe91c6e5, 0xf4b42783, 0x7d53a58d, 0x7d4fa55f, 0xcd37bd5f,
-	0x8e39322a, 0x9479fc18, 0x90cc5ff7, 0xc48d7c35, 0xcde2f3fa, 0x75e16fb4,
-	0x11c20244, 0x3f4356f6, 0x2635bf51, 0x5f48db8c, 0x6f608d4d, 0xa1efb603,
-	0xcfab89b8, 0x29f5e785, 0x03722b2f, 0x78ed09a7, 0x906762b1, 0x6eecc894,
-	0x5ebb7011, 0xabedc4ac, 0xe80f43a0, 0x75c4472f, 0xfda035bf, 0xa03c770d,
-	0x5dc64577, 0x74f151cf, 0xbb8f4fce, 0xa6c84a9e, 0x31623df8, 0x9e66bab3,
-	0x7bb1d055, 0xf74e90e9, 0x43eedcf0, 0x1a74f03b, 0xcf486ded, 0x8173a2e3,
-	0x6f53e515, 0x1f91e5f0, 0x2e3ddfa8, 0xb0fed8ba, 0xe9056070, 0x3cbe741b,
-	0x1bc4ef56, 0x233ac040, 0x77eed938, 0x25f65d50, 0xd412b8b0, 0xe2274d43,
-	0xdd12aa2d, 0x3c70e69d, 0x5167e354, 0x5ca3ee0e, 0xf55f682b, 0xa29bb457,
-	0x30fded7c, 0xb8f85a3f, 0x515dfb95, 0x98eee8a2, 0x576e5fc0, 0x1d06dcf4,
-	0x9e67f712, 0xb914cb47, 0x4522dd63, 0x4a8d2dd6, 0x9ac60f9c, 0x53f2123c,
-	0x82f51bb6, 0xb7ce9970, 0x028c5697, 0x9dfa8ad0, 0x5efe3e05, 0x539e36b7,
-	0xf2ca590e, 0xcbcb0e72, 0xaf7514b3, 0x7a40dc17, 0xc2fe5135, 0x2fc12ef5,
-	0x082bfad1, 0x1601d5b1, 0x06a8ad1d, 0x2701ceb6, 0x9b81e75b, 0x9da1f3ad,
-	0x83a00bad, 0x9f8297ad, 0xaf8170ad, 0xb83e580d, 0xf98832dd, 0x52bd7e18,
-	0xb45cbca4, 0xfc7ae264, 0x675e4571, 0xf9460797, 0x8f2f9f92, 0x614ae079,
-	0x2e4d9d74, 0xdd99b353, 0x923172ab, 0x5177e27d, 0xb5a14de0, 0x9dec0202,
-	0xf190c98b, 0xeb20d99d, 0x0702ae08, 0x48fee783, 0x5c069479, 0x04ee573a,
-	0xd89aa972, 0x7628764e, 0x5d364c52, 0x87d7d61c, 0x54171e56, 0x49d201bd,
-	0x3ebc60f9, 0x2ce88321, 0x5cfcae8a, 0xdaf190c6, 0x3a9df7b6, 0x8545a38c,
-	0x84362d95, 0xe53f590f, 0xf3e55970, 0xd91f0899, 0x9ba9d276, 0x595e7649,
-	0x1563b7a8, 0x39d86eba, 0x184dcf07, 0x4e50a3fc, 0x52824d92, 0xb1515d5c,
-	0x677e8079, 0x74ebac94, 0xdbc657e8, 0x5719c580, 0xd59f8014, 0xe46568b3,
-	0x7ebc3527, 0x7ae1635d, 0xbd706bdb, 0x60da7e4a, 0xc8cac5f2, 0x73759ad3,
-	0x6e5f2993, 0x3ff7f030, 0xbce72c9a, 0x22327282, 0x9841533e, 0x44f73c4f,
-	0xe4101c21, 0x186b5696, 0xf7c08fff, 0x77c21fcf, 0x5deb8a6b, 0x594dcf16,
-	0x534ffa40, 0x676779f2, 0x245d8a59, 0x3f8616fc, 0xd2d59310, 0x5207478a,
-	0x7bd21f9c, 0x776e18c1, 0x5eb95a1f, 0x329ab6ce, 0x27581f1d, 0xfbae0fd8,
-	0xe28f977a, 0x084827d0, 0xd599f3be, 0x34744035, 0x428c8189, 0xd11dd7d4,
-	0x27640cc7, 0xa80b1daa, 0x7fc8a5bc, 0x06bc039b, 0x96e51fe6, 0x2d98f533,
-	0xe5c107ec, 0xa5ca1ef8, 0xd2ace9c8, 0x8d4971e3, 0xa5ad1f7b, 0x3c2af6ae,
-	0xa2413c21, 0xad0a49a7, 0x1538bb20, 0x13e19eff, 0xb953a7e6, 0xabf12a3d,
-	0x6def4f67, 0x42741c69, 0xed361f84, 0x0fabe6f9, 0xa34ddf50, 0x0f5d3b66,
-	0x1696dffb, 0x1ab00bea, 0xd517c4d4, 0x1b75672f, 0x955fd47d, 0x397f3eed,
-	0xaf78abdd, 0xfa7146df, 0x1b40fee2, 0x9ec1cb95, 0x2fdc69c3, 0x6bfe3ad4,
-	0x93e4e7e1, 0x750512b9, 0x905ecbac, 0xabe446bc, 0x050bea99, 0xdc7c20f6,
-	0x47137684, 0xa9bf79f7, 0xbd0d95f6, 0x2fa819af, 0xc43c67c1, 0xff42ad6f,
-	0x5c37adaa, 0xad62f54a, 0xd62fdb57, 0x13d77bf5, 0xb43b75dd, 0xd9bf6afb,
-	0x4f5f7ca4, 0xea8d9af5, 0x26bded3e, 0xa8f337ea, 0x67eed3fe, 0xa6fd2a66,
-	0xa940ff92, 0x772a5733, 0xeb333f88, 0x235e0cff, 0x68fcd6f2, 0x7042dd8b,
-	0xe2ced9ba, 0x6606fd6d, 0xd87deac7, 0x446cc89a, 0x8ddadbf5, 0x5567eac0,
-	0x1b4ff98e, 0xfc8fa41d, 0x5d5993a7, 0xab3cf58c, 0xf09e3047, 0x22651efe,
-	0x173ddda0, 0x1114ca1f, 0xd93d73cf, 0x5fb7aa76, 0x7f80eb5e, 0x4fa6179d,
-	0x4ae7f7ad, 0xd40cab3b, 0x7d88dd47, 0xf7356e14, 0x4266d93e, 0xd01379b8,
-	0x3b2d240d, 0xe2a6ea8e, 0xe97812fd, 0x503ef01d, 0x1a976b8e, 0xbeb0524f,
-	0x9447908f, 0x09e4093c, 0xa2a379fa, 0x04ece8b7, 0xfd8c79cd, 0x71f7cd1c,
-	0xefda99a5, 0x6e7f0e3d, 0xfe73c509, 0x02e3bc7d, 0xc136fdcd, 0xcd91f76d,
-	0xbc3ff004, 0xb188ae57, 0xcd82bfc2, 0x17e7121d, 0x886fee68, 0xec9fb79d,
-	0xdd0bfcbb, 0x4b703b18, 0x01657764, 0x2f504780, 0xe7b586b3, 0x21db07c5,
-	0x1d47f116, 0x57998dd4, 0x16ea8078, 0x5fddaca3, 0x54c5daae, 0x4399aa98,
-	0xb73b919c, 0x9121d1fb, 0x9c0945d9, 0x117970f7, 0x5e0f59c9, 0x46dcbc79,
-	0x66fba569, 0x598bf303, 0x8a762dbd, 0x5a9d9347, 0x68d727f9, 0xd2ea9fe5,
-	0x956d3bca, 0x6ee9de56, 0x6dcfbcad, 0xead7cad5, 0xb6cfcad1, 0xfee69671,
-	0x0d4af6b4, 0x02f37d3c, 0xbdf3fdcd, 0xce70350b, 0xf734ab8e, 0xd32c7467,
-	0xaf77e79c, 0x76ab9cd6, 0x2e0ed636, 0xb18f35f4, 0x08c41133, 0x567aabfd,
-	0xff70a0ed, 0xff3c1aad, 0x1f6ffd6f, 0xc8a7ffa3, 0xbdde31d7, 0x37743b15,
-	0xd165ebb9, 0x999dae3c, 0x59eb9427, 0x9cb6f6bf, 0x77431558, 0x54e6fc95,
-	0xff941bf2, 0x0e16c391, 0x7df6fddb, 0x8e0acf14, 0xae88ab38, 0x1f7b80a2,
-	0xa192f385, 0xba38aaf6, 0x32d900ef, 0xe89c8f85, 0x02a5e5fe, 0x857e34e8,
-	0x3cb094f0, 0x93acf0af, 0xd972f0e2, 0x1636de77, 0x4be9c96e, 0xa120f3c2,
-	0x6a85e794, 0x22e81447, 0xeca152e4, 0x29e92503, 0xf3abf961, 0xc007ec23,
-	0x6880fd40, 0x2759b6f2, 0x9bec77aa, 0xb98f5625, 0x86f67d58, 0xa57362e0,
-	0x067f2645, 0x25dff7c5, 0xc4cedebb, 0xb44a76b8, 0x139eaccb, 0x54c46d02,
-	0xa4a31890, 0x76afa9e5, 0xed871f50, 0xff2bcd2c, 0xb56d4774, 0x6f919727,
-	0xb6f09409, 0x67f5fe99, 0xa2648eba, 0xcb0407fc, 0xf6fc42fa, 0x332759ad,
-	0x25197f28, 0xcd014494, 0xe9471c4f, 0x24dcccfc, 0x78c3f919, 0x0f65101b,
-	0xab73c289, 0x9390fac0, 0x08ccd8f4, 0x67a8ddff, 0xbe940b79, 0x5e451aec,
-	0x54b65f6a, 0x4f803fc1, 0x7e78c2ac, 0x4c1bf74d, 0xc329752e, 0x6dca1cca,
-	0x37fbe0b7, 0x5017354c, 0x428e0a5f, 0xd5e7ef3b, 0xfa4d2d3e, 0xed557929,
-	0xbf76cf6b, 0xd348652e, 0xc4cec32f, 0x6391e709, 0xbe615ee7, 0x9b03fbf9,
-	0x1a1e59a2, 0xe6ce94d8, 0x4ff7e18b, 0x71aff7b1, 0x93b1a3bf, 0xd7df5aeb,
-	0x9ef5dfd8, 0x81e7348f, 0x0d3e90a4, 0x4aec0ff9, 0xca35779d, 0x6305e46f,
-	0xa8abf509, 0x715b38b7, 0x3dc0fdf8, 0xbe10e7d3, 0xa7e7cdff, 0x6bfdbe4c,
-	0xa6ee6cfd, 0xed6c79f2, 0xd6070611, 0x963ad806, 0x55bfb54f, 0x20dfc357,
-	0x90e5ea9b, 0xd13ec930, 0x1b31e6bc, 0x67fa83ef, 0x7ca4a94f, 0xd06e9fdc,
-	0xc38b35f1, 0x0e26a5a9, 0x6b4f9bcf, 0x48de6f50, 0x00bf6dfd, 0x61ed010e,
-	0xec7ce0a9, 0x3abbe47a, 0xa36b95d9, 0x2875727a, 0xd0fe874f, 0x56b81f94,
-	0x1ebe7d40, 0xfe27caef, 0x53062c05, 0x599d1813, 0x890c37d4, 0x63013c9e,
-	0x764f4dc1, 0x3ffd5357, 0x8a73c934, 0xadad7632, 0x83fa9aab, 0x8ff70321,
-	0x847c9e5b, 0x16b7c3f9, 0xe77a4cd7, 0x31f24113, 0xf0497e7b, 0x16f6676e,
-	0xf88c2c30, 0xaf3a82bb, 0xfa9b7ea1, 0x5f14609b, 0xdff8db67, 0xacc72a5f,
-	0xae3c6d4b, 0x316b42dd, 0x2ceee5e9, 0xe8ca7bfa, 0x5f902366, 0x48873e20,
-	0x5cf87af8, 0x40f20a76, 0x6f560d75, 0x78285fac, 0xf8a3e8d5, 0x1675cea1,
-	0xbdecacdb, 0xd79f1b24, 0xf467dd24, 0xeefcb1b6, 0x3a46a8cf, 0xef58f5db,
-	0x1070df50, 0x846d1cd8, 0x7a1161e6, 0xfde36c59, 0xc008dc17, 0xd1b793cf,
-	0xc0ef4379, 0xdf278a31, 0x24aeba67, 0x72880c39, 0x8693c509, 0xdeacbdd8,
-	0xecc9b66b, 0xf197a43b, 0x4ee1718f, 0x382fcfd2, 0xfa455c0f, 0x7805306d,
-	0x03ccaadd, 0x91b726cf, 0x7287fee5, 0x9ecbfcd9, 0xf4a9f441, 0xb6cdfd22,
-	0x4a9db988, 0x1f9df87f, 0xae750bf6, 0x5b83c2a5, 0x9f916436, 0xbcf85ea1,
-	0x5bae1251, 0x0ff7c138, 0x963efa2a, 0xfe10f4e2, 0xf73e6ed5, 0xfb4ddb0b,
-	0xcf4947cd, 0x271666bd, 0x58fdf6cf, 0xf4f61b3e, 0x9f207932, 0x117f12d7,
-	0xc91bde7c, 0xe1cf48e7, 0x9fe57287, 0x9d305fcf, 0xb8291dff, 0x190c9bed,
-	0xfdd86fbf, 0xbbb211c6, 0xdf1e7506, 0x18339da5, 0x9aff6127, 0x1d1cd130,
-	0x5d444fb3, 0x9fbf5466, 0x8f7ed3aa, 0xa9cd3905, 0xa9dfc9bb, 0xbff0717e,
-	0xb8f9a98b, 0x846be94b, 0x1f2cebc0, 0x87f23e10, 0xe58782f5, 0xd18e7545,
-	0x23de6026, 0x585abadd, 0x35ce909e, 0xbb9ec9db, 0xe4fd06d0, 0x34473a07,
-	0xe98f5f9b, 0xb835bfa3, 0xd6fc9176, 0x4c9953bc, 0x9be7767d, 0x8d7e940b,
-	0xc562a9e7, 0x3f098b2e, 0xc71b9fd1, 0xa148b5ec, 0xf584c4af, 0x7c852650,
-	0x15e7c48f, 0xd363fcca, 0xef3e9aeb, 0x685932bf, 0x001e0053, 0x00000000
-};
-
-static const u32 usem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x1915c58a, 0x19d44418,
-	0x18344c18, 0x20685618, 0xb58969c4, 0x9fd329b8, 0x90c0c2c9, 0x40b9c40d,
-	0x7cc40f9c, 0xfc0c0c4c, 0x17ebc44c, 0xf5b04514, 0x84181904, 0x026ffc80,
-	0x85d70c0c, 0x8bbe1818, 0x03083030, 0xf1402ef9, 0x01ce2004, 0x58a06f62,
-	0x045e900b, 0x2c40ddc4, 0x7cdf8a22, 0x6bf20251, 0x37f95185, 0x847bf8d1,
-	0x1057ebf0, 0x47af2fc1, 0x161b1e40, 0x3e3f22d1, 0x3bd02922, 0x015f5810,
-	0xc7265f95, 0x0f27d0c0, 0xb8a87f8c, 0x4bfc9201, 0x0e5cbb20, 0x6096f6c2,
-	0xf2062860, 0x9bb0150d, 0x2f9403eb, 0x857dca01, 0xcc0003ca, 0x688cbacc,
-	0x00688cba
-};
-
-static const u32 usem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0x4514780b, 0x74f570b6, 0x9924ccf7,
-	0xf2124c99, 0x00493de0, 0x210e0311, 0x9970c044, 0x46a2c024, 0x141a020d,
-	0x84920275, 0x7e889790, 0x33feaeec, 0xa8a08901, 0x17acb9f1, 0x376141dd,
-	0x0c06e8b2, 0x60e03518, 0xba2eb300, 0xe7c045c1, 0x36bc8026, 0xb9f04324,
-	0x9d6f5ecb, 0xdd33d553, 0xc7c4099d, 0xffef7fde, 0xa55f9f8f, 0x71ebaaba,
-	0xe9d4e7de, 0x278f3242, 0xdf210a64, 0x9f968fc1, 0xf890848b, 0x206f5950,
-	0x8841922e, 0x6df466d7, 0x88cfa64c, 0x68e67a23, 0xd11d985a, 0xef435837,
-	0x9ed5cbe9, 0x186934a4, 0x1c790f21, 0x23e21258, 0x5ab54e84, 0x16f50520,
-	0xe0933ba8, 0x213e3a7d, 0x0ff8e8fd, 0x30f8e246, 0x1a18992d, 0xe0311067,
-	0xf9ad537b, 0x421eb089, 0xc3e6476a, 0x213b16fc, 0x9f9f7bfd, 0xa7eb888e,
-	0xf7c10def, 0xb59efa24, 0x6529efef, 0x13fd0e57, 0xf66ddff6, 0xf108146d,
-	0x71c7fcef, 0x8699ef58, 0x5d130e39, 0xd9b7766f, 0xbeea053f, 0xb6899f6c,
-	0xc0fb6ee7, 0xe5fed126, 0xda0944db, 0xf0233b0d, 0x8275cefd, 0xa695ea0f,
-	0xa4ae47d6, 0x9136c0f5, 0xf8d30f3c, 0x4092062d, 0x613371c8, 0xeb15873f,
-	0x5aac1145, 0x6dd77ebe, 0xa3495f30, 0xf7d04489, 0x2e88378f, 0x28d92fa8,
-	0xaf9d08f8, 0x8c07b5fc, 0xc578e803, 0xc23ea13e, 0x1f1beb41, 0x3ee83a33,
-	0xd8fcef97, 0x7ce146d6, 0x0e2663da, 0xa4a3ee23, 0x52908d3e, 0x03e996df,
-	0x9ba5fbe8, 0xbe802705, 0x4ed9dd74, 0x83695f58, 0xe3a45c3c, 0x228bae2d,
-	0xee6c918e, 0xd7cc08ef, 0xdbe7147c, 0xf9830f26, 0x65dfce4a, 0x6ee52404,
-	0xca2e9193, 0xdf603ae9, 0x3da7bcca, 0x053e716b, 0xd22fe59e, 0x8abf68f9,
-	0x6c270597, 0xdc40c2b1, 0xd7ce8eb0, 0xb05e0a22, 0x8daafec0, 0x7deaac23,
-	0x7d876e14, 0x1bd6fa94, 0x7d605ba7, 0x69458deb, 0xd716f1a1, 0x7d76a7fd,
-	0xdd13536b, 0xf3e3bd69, 0x748287b4, 0x4a5ea844, 0x4fe90b88, 0x8e8119f2,
-	0x85e7e795, 0xe2f7c418, 0xcc38913a, 0x3a15f1a1, 0xe9c07ef0, 0xf1958774,
-	0x12dbc701, 0x842ce03b, 0xc73b6eb7, 0x54c814a3, 0x8f94af8f, 0x7ae83e00,
-	0x2c763d6a, 0x6124f71f, 0x81c7a4f9, 0x33da7b70, 0x1eb5cb12, 0xc67f3e27,
-	0x75cb0133, 0xcf96171e, 0xe9606679, 0xbf63e4f3, 0x58053de7, 0xf1b8f06e,
-	0x253d6ff9, 0xaa79d658, 0xcf26f9f0, 0x7b372c32, 0x65fcf8bc, 0xeb2c2acf,
-	0x6e58b53d, 0xb2d17c05, 0x7ec3e3c1, 0x58753ddb, 0xf1ea7a36, 0x469eebf9,
-	0x3870d72c, 0xb648b2da, 0x7360e144, 0x3b453b11, 0x6573cd89, 0x9b1eb4cb,
-	0xf309eacf, 0x5a46d9bc, 0x3ad3704f, 0x3280cb85, 0xd689b67f, 0xf6b15407,
-	0x1c92f721, 0xf10fad33, 0x3594f6b2, 0x5a089cae, 0xed65a94f, 0x7379d623,
-	0x847d6922, 0xda8fb58f, 0xa289cfec, 0xacf551f5, 0xc9134c7d, 0x18fad0b5,
-	0xefa7ab3f, 0x695ae573, 0xd595bd3d, 0xe6f13f33, 0xb33d68da, 0xa93fbd8d,
-	0x2c3a27c3, 0x55b0f13d, 0x14202c76, 0xb9de4d57, 0x9bca892e, 0x5dc746ad,
-	0x7bc849c4, 0x892ef9de, 0xd90687ca, 0xde6ded85, 0x746eacc5, 0x77b77b61,
-	0x2edff629, 0xaa5db1bb, 0xb7db0fbe, 0x9ed8dd1b, 0xed835d50, 0xdb17b28d,
-	0x8a3f5647, 0x2f468ded, 0x5eaa4fb6, 0x65d7f58b, 0x55e7b61f, 0xaffec7af,
-	0xfed87d1b, 0x5c9bfdf8, 0x05fd6953, 0xe41dbdc1, 0x5dc10ade, 0x9e815242,
-	0xee4093ea, 0xf9f970d5, 0x6d1d101c, 0x446fe9af, 0x6efadc3e, 0xbfc00be6,
-	0xf507ebf8, 0x983edfa2, 0x89bce38c, 0x1c74c8e3, 0xa4e3e2f1, 0x334137bf,
-	0x257bfa4e, 0x382d38ca, 0xc6df444e, 0x24defad9, 0x2bde7aed, 0x0fd9c655,
-	0xdac2b4fc, 0xffa57db7, 0x9ebb4b39, 0xe329973f, 0x89eb847c, 0x1a7adbe9,
-	0xa7c2d03e, 0x7c2083e1, 0xf138e28e, 0xc64f5b7d, 0x327c2d41, 0xd3e1060e,
-	0xeff4e381, 0x070d38db, 0x3869f0b5, 0x97cf8418, 0x7dc19f08, 0x21c657db,
-	0x0e327c2d, 0x5ff3e105, 0xbee49eb8, 0x53fdb38d, 0x7fb67c2d, 0x498f841a,
-	0xef0cf580, 0x3f32bedb, 0xf327c2d3, 0xec7c20b3, 0x7da5ce38, 0x67fb671b,
-	0xff6cf85a, 0xfe9f082c, 0xbee8ce38, 0xaff32bed, 0xfe64f85a, 0x149f0835,
-	0xb633e001, 0xfc69eb6f, 0xc69f0b5c, 0xb9f083cf, 0xdf19c70c, 0x384cf5b7,
-	0x84cf85ae, 0x64f841e3, 0xf626bee0, 0xe3c69c6d, 0x1e34f85a, 0x3267c20f,
-	0x6fb9338e, 0x42709afb, 0x27099f0b, 0x8e99f082, 0xebbb64e3, 0xc7465198,
-	0xce3ef6b1, 0xf0b467eb, 0x104cfd79, 0x38e3d73e, 0xa938e8d3, 0x52671f17,
-	0x933e16a7, 0x29f0833a, 0xeaae71c0, 0x77af38db, 0x7af3e16a, 0x853e1067,
-	0x7db5ce38, 0x2ea4d7db, 0x75267c2d, 0x3b8cf831, 0xa36b9550, 0x3a1754ed,
-	0x95cafa45, 0x40972e1d, 0xd59da2eb, 0x8093bb45, 0xf62a225d, 0x89756906,
-	0xe6cb7df4, 0x8907f498, 0xb9c8eeda, 0x4ac7e813, 0xddb531ad, 0x52213d11,
-	0xb8c4e763, 0xb8f53562, 0xfd340319, 0x3453f3e3, 0xa30589ed, 0xddfded34,
-	0xc0fa9ae9, 0xfe9a4992, 0x3472ab83, 0xaecba1f5, 0xf64ff4d6, 0xa7a9a0de,
-	0xd359baae, 0x7ced787f, 0x6b25fb4d, 0x97ed354b, 0xea6896fa, 0x42fdd597,
-	0xfd747fd3, 0xe5fb4d72, 0xda6a0f8d, 0xd71ffac7, 0x3cb5c7d4, 0xbe3fe9a3,
-	0xfb4d79f5, 0x69378715, 0x6db627da, 0x3cafd4d5, 0xcecebaf9, 0x5f8fd8b3,
-	0xd022ebc6, 0x7f76613d, 0xf8f7e67f, 0x1bac46ad, 0x8ed05807, 0x722d65df,
-	0x35f8a31c, 0xd1c0b5be, 0x7017e28f, 0xf6457e0a, 0xda4b9280, 0x267bf3e8,
-	0xd3b12fb9, 0xdd18f7e7, 0xd8c3db97, 0x041e94a7, 0xc3a50492, 0xfdbea500,
-	0x63d19901, 0x23f3c0ce, 0x95fbe9da, 0x1888c086, 0xb312cf5a, 0x777e811b,
-	0x8a2fcc0a, 0xf4154914, 0xf411348b, 0xce481e0b, 0xa2abc17c, 0x298355d7,
-	0x71a10a1f, 0x24eec957, 0xaade33b0, 0x1d82f76e, 0xee983352, 0xcd21006b,
-	0x4bdfbb42, 0x0607b4fd, 0xe9b92517, 0xb5232678, 0x1bf3d5d3, 0x3869fce9,
-	0xebd00b7f, 0x7c7f307b, 0x294df9cf, 0x9bf33413, 0xe6689487, 0xfce91b37,
-	0xafde4276, 0xa7e7c53e, 0xc8449848, 0x3853845f, 0x094869bf, 0x9180ffce,
-	0xf9ea2bfa, 0x1ff38323, 0xd67ffd86, 0x2653fedb, 0xa43ff769, 0x237fbb54,
-	0xea91ffdb, 0x48fe7cb3, 0xe151ffdc, 0x90ffdb2c, 0x137fb652, 0xbf38371b,
-	0x93ff082d, 0x2f677f30, 0xb3529bf3, 0x5a1ffbb4, 0x89bfdda6, 0xfd5ddfcd,
-	0x82df9f2d, 0xbe139ff3, 0x5a1ffb65, 0x4d1bf386, 0x8fd0276e, 0x95646071,
-	0x1d4fce8f, 0x04490761, 0x40f3a172, 0xfd163239, 0x148497e4, 0x913dc75c,
-	0x8abede8c, 0xf286f4a4, 0x58fccbc6, 0x996c951f, 0xb4e2efd4, 0xb67378be,
-	0xb612e411, 0x21657f53, 0x8d1dea5f, 0x7937d222, 0x4e1be4d2, 0x28d9dbd7,
-	0xc77ea17a, 0x207d9393, 0xe44d2aff, 0x4f787cf6, 0xfe787e22, 0x9fa353f9,
-	0x5f4bef57, 0x8f95ac2e, 0x2df8a9b7, 0x90e547e8, 0x98165591, 0x1fa9aed7,
-	0xa1107ea1, 0xd427c5fe, 0x249420cf, 0xbe6cca8f, 0x04bfa8cf, 0x2fea36f5,
-	0xd5213b41, 0x75e25fb8, 0xae8c307d, 0x3f289f3f, 0x26f3ee17, 0x9e3a2964,
-	0xc8f7f8c4, 0xf807c11a, 0x14597db8, 0x3d687e05, 0x4d38de85, 0xfb0fee9d,
-	0x7c12ae07, 0x86380bcf, 0x9333e01b, 0xbd60478f, 0x67605eb4, 0xe8a21cef,
-	0xb0514fef, 0x8a40d560, 0xb338d08b, 0xa44e4b88, 0x5a59cfef, 0xa2e84328,
-	0x2f061055, 0x2059fa01, 0xe0119753, 0x69278de7, 0x7ae8389c, 0xf1b3b66f,
-	0x63e4ba67, 0x14f5aa6d, 0x3e5766c8, 0xa1414f5d, 0x359feb88, 0xd1fedb43,
-	0x619728ce, 0x3d572d0c, 0xc9ccf381, 0x54dfb6d7, 0x75cfada0, 0xef54eb6b,
-	0x6ef7a0c9, 0xa73fd129, 0x9cfba160, 0x5d2b8417, 0xade75d28, 0x56b70e1c,
-	0x5e0d5ec9, 0xda556dc1, 0x26e0a021, 0x5f7c2fb8, 0xf6ffd9ec, 0xa17ada65,
-	0xb05f5b57, 0xa73e374a, 0xff1ce39b, 0x683e8047, 0x83e80279, 0xa718f3c2,
-	0xd55c908f, 0xc18dc7d2, 0x50fa306d, 0x625c71f6, 0x8ebe3828, 0xdac2c7d1,
-	0x50f4f0a8, 0x9707a418, 0x7a14be9a, 0xc3d38db8, 0x8a1e9ca7, 0x6ae96ad7,
-	0x4cadf12e, 0xb2dfefa2, 0xe9e21766, 0xe8c850a0, 0x3d0a97e1, 0xc1e869b4,
-	0x8f41e9cd, 0x3d38dbbf, 0x4673f6dc, 0xb67c7a0f, 0x5b687a71, 0x29264e7b,
-	0xf14af13d, 0x3c53a9a0, 0x376ef0e8, 0x7c503d02, 0xf987a584, 0x8dd37dc1,
-	0xde02fad3, 0x9c5f03d6, 0x053db01e, 0x4e104ec0, 0xcf6a7ef8, 0x684e54fe,
-	0xc36bc5ea, 0x31b2bfe3, 0x6a98ee3b, 0x57f5e55d, 0xf5531dc5, 0x53375c5b,
-	0x9be45f53, 0xbc5fe9ab, 0xbed350b6, 0xa69176b0, 0x3baac17d, 0xef42f535,
-	0x6ffd35cf, 0x69ad565f, 0xb56ab5bf, 0x9296fda6, 0xb9f534c7, 0xfa6b5fee,
-	0x5eb054df, 0xff273ed3, 0xacfb4d45, 0xf5345b19, 0x34d7ae99, 0x2f3b0dfd,
-	0x31e81ebd, 0xc048a0eb, 0x71e638fe, 0xf71fdd20, 0xa4f2c48c, 0x717c89c7,
-	0xcb0133da, 0x4fcd8d7d, 0x7cbb495c, 0x26882819, 0x91167f4c, 0x2cf64218,
-	0xcaaf5777, 0x504e7d02, 0x7971feef, 0x1077b551, 0x07065395, 0xad6f39c2,
-	0x11c7f891, 0xe2528022, 0x50c407f3, 0x6d1b567b, 0x3dbdeb8f, 0xb614ad6f,
-	0x0a4dab3d, 0xe3e56e3b, 0x61ed4385, 0x7e2133e2, 0x3ec10326, 0xb9f6e2ea,
-	0x204cbdbe, 0x84e7eaf9, 0x8ffe472c, 0x5cfd3031, 0xa2726466, 0x1cff6b6c,
-	0x7fba8362, 0xe685d544, 0x95cca7ab, 0xaa91f408, 0xb5e2e3e1, 0x3ce46997,
-	0x3c6de881, 0xcd38d9d0, 0x5775c5f3, 0xd8ebde6a, 0x2bbae225, 0x7d508640,
-	0x07e48c3d, 0xfd97a00c, 0x8d6643cd, 0xceba7586, 0x355e401a, 0xd8fda3c6,
-	0x771199e1, 0xe63c024c, 0x53d27963, 0x8f71e580, 0x9e63cb1b, 0x788f2c12,
-	0xf36cb0aa, 0x33f2c32c, 0x4fcb178f, 0xfcb0ab3c, 0xe58b53c8, 0x2c5acf61,
-	0x587c7a0f, 0x61d4f01e, 0x1ea7bef9, 0x234f56cb, 0x171e9d96, 0x29bf0a96,
-	0xddd3d0f0, 0x4fa7ae49, 0x805dfd03, 0x07c4e2ce, 0x0a0d57aa, 0x8ae259d1,
-	0x59bdab87, 0xd6f371a1, 0x249d389a, 0x0861e868, 0x81e364f8, 0x5e9c4c5e,
-	0xade7b7c2, 0x9ed82f95, 0x1d8726d5, 0x7ff9f2bf, 0xf9cdbd0d, 0xa216f491,
-	0x7a3a81a7, 0x3d18bd4a, 0x87c7124d, 0xc18e69e8, 0xa71ff4ce, 0x1f6087a7,
-	0x628ffc61, 0xabc6ea30, 0x14573aec, 0x73f3678b, 0xb2d16a07, 0x7b9f3678,
-	0x15ae1d05, 0x48df3fed, 0xc8f773c0, 0x78808fbf, 0xaa61f77d, 0xdf7b9328,
-	0x7a5e9e9f, 0xfd0bbb87, 0x551f22a0, 0xb67ae3a2, 0xb8324447, 0x0cc81846,
-	0xeac84e92, 0xce75bfe1, 0x44bac34f, 0x9f7de162, 0xf3986673, 0x4f670228,
-	0xeb871789, 0x6357eb0a, 0xcfe3bc60, 0xca1323fc, 0xe6148639, 0x688b34df,
-	0x0bff13df, 0x506f804e, 0x499c991f, 0x0c0f0710, 0x3ed1da37, 0xf0b459f0,
-	0x667ad2f3, 0x29ab7e08, 0xdf515a8c, 0xfc2126d7, 0xa2357d86, 0x77e01f7f,
-	0x317f3931, 0x0df7ce78, 0xf3c097f8, 0x62f1f262, 0x1cb89172, 0xfdd2372f,
-	0x9d1ced77, 0xe403a0fe, 0xade185e0, 0xd7e95f9c, 0x7d28bcf3, 0x4aee3a2f,
-	0x75b8e850, 0x88f3a108, 0xefc71da2, 0xc984b86e, 0xdbeec52f, 0x05f5f266,
-	0xb59267af, 0xf9c53de3, 0xbbaf194f, 0xf81b05e5, 0x0c924b5b, 0xf06163f6,
-	0xf5e594a0, 0xda8b76c9, 0xd6d46cfe, 0x19856bbb, 0x3a2768f5, 0x068f67a2,
-	0x1fb7613d, 0x3b72061b, 0x9c654b09, 0xfb464925, 0x4ef72a31, 0x3346a5d7,
-	0xe4c7cf3f, 0x9418e6c1, 0x663da717, 0xaf53ffec, 0x9471b7a7, 0x40d210f5,
-	0x1e419a8e, 0xded4b6d3, 0xcf4af7fb, 0x3c4617d2, 0xbf926df7, 0x4cd0fb02,
-	0xfc0effff, 0x5d61220d, 0x5eb2b719, 0x872e9af4, 0xf3359be7, 0xca1cf7d1,
-	0x2977eb19, 0x891be217, 0x96e8571c, 0x5c638bea, 0x8bae2c9f, 0xcfed6bb0,
-	0xb2bd4d18, 0x635dbfb1, 0x541fc28f, 0x412a92fe, 0xe329fa02, 0x5925d3e4,
-	0x7d740956, 0x1090426f, 0xfd6056e8, 0x466dcdca, 0x95ce03b7, 0x5b7ade19,
-	0x4cdfc51f, 0x897c9289, 0x61cf16b9, 0x9d2fea4b, 0x4ce67a0a, 0x88048ac3,
-	0xbb162c1b, 0xf30fc9ef, 0x79312cbe, 0x0727c8bf, 0xa73df6b4, 0x55c7420f,
-	0x945c639e, 0xeaab8e58, 0x8f16061d, 0x009b8fd1, 0x1c5fc6e3, 0xf79b153e,
-	0x413b074f, 0xc68aa70f, 0xca3746b3, 0x665ffa45, 0xfc0a4e08, 0x13f314de,
-	0x697e3a24, 0x2dc63b5d, 0x11deca4e, 0xbc80bcbf, 0x4b3fb9ec, 0xd528f1d2,
-	0x15a4bcbe, 0x813f99e6, 0x371c444f, 0xf8e54c7d, 0x04c93fa9, 0x4f3910e4,
-	0x4862657b, 0x063bfb86, 0xf90cc862, 0x161bf33b, 0x4fbc01e7, 0xe547bf81,
-	0xdf241de6, 0xb5207886, 0x9cdfe099, 0x00198621, 0x7de433a7, 0x1e1538db,
-	0x87232572, 0x94829533, 0xf1c14c1e, 0xefc1fddd, 0xb4d41532, 0xb9e0638a,
-	0xc23ff8a4, 0x72471877, 0x50b7980b, 0x897b9ec0, 0x97e81ab9, 0x3f1a51fa,
-	0x9a51fa8d, 0x34a3f53a, 0x437222f5, 0x1425e402, 0x9f13293d, 0xb4d27080,
-	0x88ec928f, 0x555262c7, 0xafd1f603, 0xbe6dfc79, 0xe903489d, 0x7d5fcb3e,
-	0xee90b336, 0xc5896ae7, 0xf57394fd, 0x0e0cb145, 0xa33e25a5, 0x7f73d2cb,
-	0xddc61b47, 0x8c3f2548, 0x6fcfcec7, 0x051e6236, 0xdc994ab4, 0x7de949f4,
-	0xa20d89ff, 0xfd06c22b, 0xbd6573e8, 0xff7fdfc9, 0xf212fdfa, 0xb4a3ee38,
-	0xfa01266e, 0xc02791eb, 0x09d723f7, 0x7e185f2e, 0xaf74e42a, 0x013ba7e8,
-	0xf143e37e, 0xf574fbac, 0x4abe1cd5, 0xfb5d29fd, 0xfd2f960f, 0xbcbe4688,
-	0x93efba29, 0x027933c6, 0x00a417f0, 0x1e0fd7f2, 0xf8c7a93f, 0x7f1f81ab,
-	0x6907f1b2, 0xff8e9ef9, 0xfeba4fd4, 0xbfd63d61, 0xcbfadc3e, 0xbb697d5f,
-	0xd297ea97, 0x23653c3f, 0x494edf94, 0x8a4e09b5, 0x2b8db2f7, 0x3b902e6d,
-	0x7c06d792, 0xce27ca71, 0x870f4708, 0x06a57cb8, 0x78804588, 0xc749fc2b,
-	0xa1e9bd3f, 0xf89ec0eb, 0xc76ca36a, 0xc99d6a38, 0x5cf4a26f, 0x8f28b0d1,
-	0x3b7ac18c, 0x16703fab, 0x51b2bfe8, 0xd3a6a23e, 0x953ddfd2, 0x94357900,
-	0x921a0652, 0x7fa3f4a0, 0xf3e1b152, 0x546f60e9, 0xabf20092, 0xff983dfe,
-	0x87d4589b, 0x9ee8c685, 0x499818ed, 0xafd9f780, 0xb3a1e1b2, 0x6afe0da2,
-	0xbe9038c3, 0x37f7097f, 0x3f6b245a, 0x82b9273c, 0x54f2015c, 0x31f10781,
-	0x8bc5637f, 0x4ed31abf, 0xe1b1d3d7, 0x0541364f, 0xea4fc527, 0x9bf05fae,
-	0xcbbd1dd7, 0x87ca4eef, 0xd156bb6a, 0xee468e4f, 0xb2b13527, 0xaedbf64c,
-	0x6ca4f2a4, 0xd2f4ecbd, 0xbd2f65c7, 0x2067dbf0, 0xc9a1fd7e, 0xbf8e9c39,
-	0x073da5f8, 0xe2fad127, 0x3cbf722d, 0x908b0db6, 0x254bc210, 0x7a597ffd,
-	0xafa50f08, 0x463a31ec, 0xc6f7e7b3, 0x78b1f086, 0x19232ecb, 0xb91e13dd,
-	0x6d8cbbf5, 0xa9783096, 0x760e9f6f, 0xbf178adf, 0x3bbc8236, 0x892053b5,
-	0xb9e061c9, 0x85da0f7e, 0x23c42700, 0x6f1053c7, 0x1495feba, 0x145fa02f,
-	0x37dbe93c, 0xe3027971, 0x9e90d239, 0xce9d7e5f, 0xc991f25f, 0x792ffb09,
-	0xec1b2ef9, 0xc55484e3, 0x95d9fae8, 0x4adf2009, 0x1d826f64, 0xe4bcf64b,
-	0xde91bbb9, 0x9ddff78a, 0xae92e2c0, 0x95d406fe, 0xbfb0fede, 0xe0e6eb85,
-	0x1b888afe, 0x59e4aee9, 0xcb47df31, 0x6332252f, 0xb8be184b, 0xf2726656,
-	0x2354f3c4, 0x509dfdd0, 0x22fbc0f4, 0x627703d7, 0xbe6ef3dc, 0x62316a17,
-	0xc3334bfd, 0xc0d930d3, 0x2bd32ce5, 0xf0dd7a41, 0xd38bea00, 0x70895d83,
-	0xd21956be, 0xc437a80f, 0x1912d3fd, 0xc19e987e, 0xc99ea8f7, 0xbfd0e785,
-	0x8c457655, 0x7a87bcd1, 0x297f9945, 0x3bae9f9f, 0x13b5ec12, 0x8ffde109,
-	0xdf0acb9f, 0x4542bb53, 0x66fe2a5f, 0x3561befc, 0xdf856fe3, 0x4067337d,
-	0x180717fb, 0xa07bc0ff, 0xfcbae967, 0x6bbed889, 0xc0f280b6, 0xf8e1fc44,
-	0xf9cc837a, 0xd0aedb5a, 0x24b75d09, 0x05e8ab44, 0xf8458fc6, 0x7a2f5ea3,
-	0x92a7be92, 0x9f309597, 0x0a78e7ad, 0xfe7316df, 0xf96b219f, 0xef8bac9f,
-	0x99653e53, 0x33edfbec, 0x3f94afc0, 0x57e00ebd, 0xfdf61f39, 0x07cdcdb7,
-	0xfa7ca66f, 0x4f857ab7, 0xcf53f2b5, 0xef5b25a7, 0x7a9f4026, 0xa0dbfd3e,
-	0x4f96122a, 0x7cb0f3e9, 0x7feda83a, 0xf02a7e54, 0x45f802ab, 0xc8a7e085,
-	0xa8e0dec3, 0xd9568797, 0xd21e5611, 0xd99201df, 0xba14fe93, 0xf4ade853,
-	0x4143e5f7, 0x52e904ee, 0x5d20bba1, 0xdfa7742a, 0xfa7e16af, 0xc13249f6,
-	0x26bfe575, 0xd65cffa3, 0xe942f2c4, 0x66077b7b, 0xa85c9c20, 0xdeed48c6,
-	0x75d4fd81, 0xaf5eae9f, 0xd5d2efeb, 0xddfd75f3, 0xa6957aba, 0xb363597f,
-	0xfdfe2091, 0xb2e27e9a, 0xb8d1c867, 0x63eaf470, 0x59c3597e, 0xc2e817a3,
-	0xe5f7c012, 0x790bc4e5, 0x221d8186, 0x28ba05c6, 0x7e206b8c, 0xe7d939b1,
-	0x656372a5, 0x743f8b04, 0x58b603d9, 0x618cae5a, 0xb1bc40f5, 0xf29ee406,
-	0xe2c1103c, 0x01f95d8a, 0x9fca8c5b, 0x51126f6a, 0xc8f9b76e, 0x167e708c,
-	0x47c828d5, 0x76b7a46d, 0x4d35ee76, 0x06590cb4, 0xd15aa571, 0x1df83609,
-	0xe0d937d5, 0x29aba9dc, 0xfa02faf5, 0x451fe17c, 0x8ae97b4c, 0x75818db4,
-	0xea4baf11, 0x4e6ff2af, 0x59d3ef12, 0x9a0b7f74, 0xc7739f98, 0x423d9d1a,
-	0x153d20d6, 0x411a9659, 0xe27f529e, 0x86bcf688, 0x1f2945f1, 0xb69d64af,
-	0xd29f795d, 0xa5f3fa01, 0x6eedb41b, 0xa07f0fee, 0x3258c9f0, 0x2ca3fb96,
-	0xf2e5c30e, 0xfaed3134, 0xae8f8a02, 0x68989116, 0x4449bbbd, 0x166f747c,
-	0x234f107c, 0xb7e478de, 0x7940120a, 0x03a9c0a8, 0xbbd8c9f8, 0xf6d8eabc,
-	0x812fe669, 0x3c7fb66e, 0xd9693fe6, 0x11c3fdb1, 0xd5fd406f, 0x263e4343,
-	0xeee7fb3d, 0xff73c08c, 0xa4569dae, 0xef1daef7, 0xd425f90e, 0x6139335f,
-	0xbf3b5d9d, 0xd3f4031e, 0x0254dcb5, 0x306baef2, 0xd8aec78b, 0x3698f5f1,
-	0x33f7afd4, 0xfe6461fd, 0x3fd37761, 0x41fa133e, 0x76057749, 0xe428cec3,
-	0x23d7caa7, 0x6bbbdf30, 0x6e99d7c7, 0x9fb74fcb, 0xd1e79e0a, 0x5b052565,
-	0x2c317d61, 0x8df2a18f, 0xd3542f89, 0x761bcbf9, 0xf6d01719, 0x39ff37dc,
-	0xd768e406, 0x750f6656, 0x41cf6dca, 0xf194431e, 0xe29972dc, 0x8a9813ab,
-	0x33bfcd3a, 0xdf02e466, 0x3fcb84f4, 0x57d63e31, 0xaffca478, 0x62e08781,
-	0x33eacef2, 0x6fefb00b, 0xe318fb3f, 0x4ba4269a, 0xab7fbf65, 0xe57b46af,
-	0xfecefb62, 0x82df6e7f, 0x76fb2fbf, 0xfbef9bff, 0x7abbd738, 0xe749e83e,
-	0xfac1ee3b, 0xae27564b, 0xeef48fb7, 0xffc7fd85, 0x7bffeefb, 0xc52b7de3,
-	0xfbe2edbb, 0x5affcdfe, 0x36f1ffbc, 0x7e3b778e, 0x3fe6f3d7, 0x57df7d71,
-	0x6ff9bdce, 0xf6def78e, 0xadf5d8af, 0x067b2a86, 0xa9015f5d, 0x316182b5,
-	0x92dbbe37, 0xd76c80e1, 0x8f30fd73, 0xc34bce0e, 0x23014df8, 0x904d0bf3,
-	0xfb7e0747, 0x0b89411c, 0x1d751fa2, 0x1bae1fb7, 0xc8768254, 0x9987ae75,
-	0xb55520dd, 0xadfed366, 0x989c0b39, 0x0fd24973, 0x7b3ea1bb, 0xfd6baf32,
-	0xe204f7c9, 0x7f1da812, 0x2d35ce5d, 0xef5ed760, 0xa5eed112, 0x1fbbda25,
-	0x9ece990c, 0x3dfad04f, 0xfadadd73, 0xfada054d, 0x8dde3e1c, 0xc6ffad84,
-	0x7107c17c, 0x13f65355, 0x356710f1, 0x9089942d, 0x5542f90c, 0x98bfc12b,
-	0x7f7daf93, 0xe3c1f81f, 0x531c3c7f, 0x971c0a4d, 0xb6485c20, 0xfa48dce8,
-	0xeebe4700, 0x7d63d9d6, 0x244ccf90, 0x8de38327, 0x838c4ee5, 0xe65b7f73,
-	0x5596cbef, 0xb2cfc0ad, 0xfc56cfce, 0x4de0dee5, 0xe38dffb8, 0x2fe084a4,
-	0xbff444bb, 0xadff9d65, 0xe2fbe5e0, 0x8fe3c143, 0x3a97cbc5, 0xb8b20cbc,
-	0xccabf008, 0x16a985fd, 0xca0fab27, 0xc8de7827, 0x9fa905fd, 0x42d3788b,
-	0xcc8bdf79, 0x5f386ce6, 0x30148f33, 0x1afd71de, 0x3983f511, 0xe575c04d,
-	0x8f31904f, 0x7e4373f8, 0x6f3be026, 0xbf1515dc, 0x0270cb60, 0xb871173c,
-	0xb42a9117, 0xeff9c95f, 0x84cacbbe, 0xf6820673, 0x211722ef, 0xadbf52d7,
-	0x47f04b28, 0x4b157852, 0x0e9d1bc4, 0x1c816f71, 0xb5bdc4d1, 0x47fdf875,
-	0x8b9c6842, 0xbe4deff5, 0x5fe5d4fc, 0x323b3ca9, 0x1e41fa8c, 0x5849bb9e,
-	0xaff156dc, 0x70626f6f, 0x7c132cac, 0x7e774829, 0xee755f39, 0x83e71cf8,
-	0x0e3bdebf, 0xa3f664e5, 0xefd1a3a3, 0x6fd03977, 0x437ee4a8, 0x0d11d7b7,
-	0xa6eeae71, 0x9b3e7e54, 0x55cb536b, 0xfdcfdca5, 0x7e40bfee, 0xa6bb2d21,
-	0xf822b50a, 0xf1802471, 0x08d4ef5c, 0xfe4c31b2, 0x1931ffeb, 0x6154fd38,
-	0x627e001c, 0xfd91e026, 0xd1abe98a, 0xadbc2ab1, 0x3494f6b9, 0xe01e27a6,
-	0x0e754477, 0x0be163f9, 0x75c03e7e, 0xf4db447f, 0xadfb30fc, 0x5638b135,
-	0xe2df5bde, 0x34379c77, 0x9700cb25, 0x9a8aa61b, 0x2655fb73, 0x238d97ee,
-	0x795d60e3, 0x9b655d6f, 0x11697808, 0x66ddf09d, 0xa359d365, 0xb079cc3b,
-	0x3e309e1e, 0xca8fd5c4, 0xe78022ce, 0x082387d1, 0xf2efd1f8, 0xf834c673,
-	0x430d226e, 0x2b882e3a, 0xb5c39afe, 0x72c764d3, 0x1cb65e56, 0x6b4de74f,
-	0xa3858fb0, 0x7fbc01d4, 0xe3211827, 0xbd878921, 0x501bf4a7, 0x1bb5fac6,
-	0xf6e115ed, 0xed823c3f, 0xef3898bf, 0xfbfc2099, 0x51fb2de1, 0xec073fab,
-	0xae3ca983, 0x09ae83d2, 0x0cf747f2, 0x1bfa07c1, 0xe7ac61fc, 0xdf84efb1,
-	0xbeb3be55, 0x8559e981, 0xde70f5ee, 0xccace1cb, 0xe2c4dc7f, 0xfce27faf,
-	0x8159c0a5, 0x4abd7eaf, 0xa6af2a7f, 0xd751e3a8, 0x197d8e37, 0x268a9bec,
-	0x43a06ec1, 0x466d4855, 0xc6cac3e0, 0x6f3864c7, 0xe360eb99, 0x8c7f2912,
-	0xd3a09f3a, 0x9a3bf2c4, 0x0dbcafd3, 0x1adce4e8, 0xe242e813, 0x0dace3ba,
-	0x06bbf0e4, 0x7be19fe7, 0x227bef6a, 0x790178d9, 0xcea7b1f5, 0x8f525535,
-	0x9ceb8c9b, 0x432d9655, 0xb296ecf8, 0x8aa2725d, 0xb14d3a9e, 0x1f3caed8,
-	0x8748e650, 0x5c3e74e7, 0x1311f787, 0xd242ef81, 0xfbf15bea, 0x62aa5bd4,
-	0xd4961d18, 0x3d6232ef, 0xf32bfb19, 0xf9e8f329, 0x369e7669, 0x6e4178ef,
-	0x4b8020db, 0xd4bfc99e, 0x1f4e8619, 0x8ee72b33, 0xb84f53df, 0xf98edd28,
-	0x2c4f48ff, 0x1b44f455, 0xef2bb9e6, 0x3e3335cf, 0xc489e957, 0x49627a70,
-	0xf01123b5, 0x6a4764b0, 0x92c93022, 0x084b4e3f, 0xf03e27a7, 0x43e373b0,
-	0xaeeebbfc, 0x5c4f54d9, 0xb313d2ae, 0xf44e9023, 0x959ae5ef, 0xe88b8d73,
-	0xff6f0509, 0x03e6f2c3, 0xf86113d0, 0x56b346fb, 0x54d8dc4f, 0xc6e27a88,
-	0xfbe6a2d9, 0x17cd6baa, 0x09d913d3, 0x3b2eb173, 0xcfd0c2a3, 0x39bfdc07,
-	0x61fbf3c4, 0x6b17d01e, 0x9b8476cc, 0x26f46f5e, 0x55f6c7d7, 0x825fffae,
-	0x97d722b3, 0x43f761cc, 0x8243a4f4, 0x2e64bcf4, 0xd002eb95, 0x4beb9323,
-	0x4e71e56e, 0x07cd9c9d, 0x96a19b39, 0x0afdecb3, 0x950bd337, 0x9abfc98d,
-	0xae6fdb47, 0xda669d95, 0xdc90e6ff, 0xddcb54cd, 0xe1096635, 0x96ee43dc,
-	0xae7bb930, 0x4fda1c69, 0x53efedbd, 0x3ca96f2e, 0x430ce61b, 0xa2f3051f,
-	0x1ddfdf34, 0xda76fb1d, 0xef2fc02b, 0xfb7e788a, 0xf603b739, 0x033b7d8d,
-	0x7c53e9ec, 0xfcb8db3d, 0x5cf8f4eb, 0xc81ca953, 0xd3d983bd, 0x84459be5,
-	0xe303455f, 0x91618aff, 0x4fad073e, 0xcf16ff4f, 0x60ef1761, 0x0774b0e7,
-	0xfc2ad979, 0xadb77e2f, 0x1605ce06, 0x1cf017af, 0x005fbe19, 0x78731678,
-	0xe3173916, 0xdaf14a39, 0xe53fe7f0, 0xa6a2dfbc, 0x5f0f18f5, 0x2bf6d3e4,
-	0x29f5761f, 0x4cf247f0, 0xaf790f0c, 0xc9f5be08, 0xeba0cf90, 0xe78d5ce7,
-	0xdaf5e547, 0x7ef907e7, 0xb4fe8a17, 0xe4fbe857, 0xd3bfcccf, 0x1ea0fbc3,
-	0x123f252e, 0x5c29fb2e, 0x70f5fe32, 0xd40e0de9, 0x01f3c7be, 0x2b0e3c3d,
-	0x649d2572, 0x6e7e1f00, 0xf15ca170, 0x42e143be, 0xb1e3bbe7, 0x40fb9ae1,
-	0xbcb8738e, 0xf4d7706b, 0x02157e87, 0xb75e2bf6, 0xad024f65, 0x6327abcf,
-	0x78a178e1, 0x070f56ad, 0x03837ef5, 0xaabcfaf5, 0xc7e4022d, 0xfbdfe42e,
-	0xc31ef895, 0x5d6e547b, 0xed3cf546, 0xe4dd20bf, 0xfdf07386, 0x9b940111,
-	0x47c6dd0a, 0x8e25fb30, 0x03a3a1cb, 0x3f515302, 0xe4760a35, 0xd3047f47,
-	0x704f1457, 0xc4f34bbf, 0xbc73a7af, 0x2352b8b0, 0xc52563c3, 0xf4f3f01b,
-	0x63af5e26, 0x4a2de076, 0x39f05ebd, 0xbbab9004, 0x8c5f7664, 0x8e04e240,
-	0x847e9504, 0x04ecd5f3, 0xb4779e15, 0x28dffa33, 0x8f81f138, 0xf043f7fe,
-	0x33dd2bdc, 0xf4afa63b, 0x3e29c0ae, 0xfde78b42, 0xe379ad11, 0x9bf9c1fa,
-	0x737bc4e0, 0x9cf0629a, 0xbb2d58e8, 0xbf9525ff, 0xf00be7a7, 0xd1f7d43b,
-	0x438584cc, 0x088cf37e, 0x79c50fcc, 0xa65d9853, 0x7bfa4f96, 0xfe6fbe80,
-	0x45692551, 0xc7942c7b, 0x04de7ee8, 0x3410cde3, 0x09104ef9, 0x09ff3a03,
-	0x7cd5bfc6, 0x9249f181, 0xef96f31d, 0xedcf2bb2, 0x5e2cbbec, 0x799c1e6f,
-	0xef851e68, 0x13a255b9, 0x0c9ba85c, 0x2059838e, 0x09941e6f, 0x7db9cbf0,
-	0x81e98bb2, 0x853bd428, 0xefc51eef, 0x0e590ad9, 0x8fbc291a, 0x7ca397e9,
-	0xbd511f3d, 0x0a5882ed, 0xf70f1fa9, 0xee76cce0, 0x7880e69a, 0x95fec64b,
-	0x2b39ce70, 0x20f07ed7, 0xbb3573e0, 0xaac8e907, 0xeed3f45c, 0x7e4053ba,
-	0x06f14c3b, 0x9d99cfef, 0x9d20f07c, 0xf155d6f7, 0xcf396e78, 0x9c237f15,
-	0x27dbce63, 0xdfb41d3a, 0x16adeb82, 0x66bcc738, 0x2adc48a4, 0x5a4adcf8,
-	0xaf33be31, 0xb039ceea, 0x0faa12ee, 0xf72864c5, 0xfa844b4f, 0xafdf013a,
-	0xf08dbaf4, 0xdaeb66bd, 0x3a0cc6b3, 0x07ed117f, 0xc75caf60, 0x106e55fa,
-	0x5dfa909c, 0xca18f4d4, 0x020da2cb, 0x4ad3345e, 0x1b335fed, 0xe3a667d7,
-	0xefa3aeb6, 0xbc317ad3, 0x886ee30f, 0x27ce11b9, 0xf13ae92b, 0x78d509fd,
-	0xdf445d2e, 0x75a4cda3, 0xde389dc3, 0x810275a2, 0x264b03ef, 0x01323f24,
-	0x3b27dbc6, 0xaed0fda1, 0xdd611b5f, 0xfaf9d1b7, 0x8817f1d3, 0x3fa0d36d,
-	0xc760a5f9, 0x46ea87fb, 0x0baddc60, 0x542f0c36, 0xe63ac70d, 0x0c103b13,
-	0x651f3a92, 0x4efb0447, 0x755968b8, 0xcdabec0d, 0x406c9f1b, 0x046b3aba,
-	0xc28c7e3d, 0x3c874ddb, 0x2e79646a, 0xc6a3decd, 0xfd1c9536, 0xdf152228,
-	0x1b31a3bf, 0x921626f3, 0x709bcc7c, 0xa47b3357, 0x0f84657d, 0xb2ed6ae2,
-	0x6f3c087d, 0xe7c2695e, 0xfd312f9d, 0x0db839d3, 0xd627dbe3, 0x5fbe04c9,
-	0xf52eb15c, 0x89e3c069, 0x9bd232cd, 0x1bcb2cf8, 0xc5897e28, 0xb1d79ac9,
-	0x352c4f71, 0xa0b57bb2, 0x5f8bd69d, 0xb40af254, 0x51c8ac72, 0x2f4a728a,
-	0x6b72f497, 0x46d593d1, 0xf21ed920, 0x9474e96a, 0xef54a557, 0x90f5a100,
-	0x306a8357, 0x5797aa6e, 0xc8a2c495, 0x5f8874a9, 0xbe0f9616, 0xf1d02d6d,
-	0x8183ecad, 0x5f6bff56, 0xb77a053e, 0x49e04acc, 0x5a7f6485, 0x80417460,
-	0x6d35e65f, 0xa0f812f9, 0xde045e64, 0xf01c75c7, 0x26b37c00, 0x8bafcf0e,
-	0x6f08857c, 0x78b72f25, 0x95ce96ad, 0xb75ce3f8, 0xfd6a5c48, 0x5c451255,
-	0xee877eaa, 0xe74af4a3, 0xf051bdb9, 0x743ca881, 0xbbdefb5f, 0xc76eb033,
-	0xf6e32d75, 0xd22b1ac1, 0x9f9fa1f3, 0x7af4095d, 0x0102bddb, 0xdd789d7b,
-	0x2b0fa035, 0x880e0ad6, 0xcbdf170f, 0xefa62fde, 0xfd0fbac3, 0xa515d19a,
-	0x7fd0076f, 0xf6c7bac5, 0x820dff62, 0xb43fc603, 0x89ed10be, 0xb048af12,
-	0xfa3b437d, 0x614f540f, 0x57b3599e, 0xaffa004c, 0x0764dfb8, 0x23a14953,
-	0xf9db2e85, 0xecc4087d, 0xbe8b331c, 0x15160ab7, 0xc51e93df, 0x4fa82102,
-	0xbd2a4e81, 0x5fdace8c, 0x36409d92, 0xf64ba717, 0xae09fc1d, 0xe767c55f,
-	0x74ef874c, 0x047ea98a, 0x975e6d3a, 0xe23b046b, 0xfcc04f84, 0x49749e8a,
-	0x4a3b6a2c, 0x0567cba1, 0xd07baf26, 0x7b0e8ea3, 0x4ba71dd0, 0x5128fe85,
-	0xb6595fa3, 0xfdf0264f, 0xdd1e9ebd, 0x908dfd72, 0x32f851ff, 0x6f5d0fdd,
-	0xd1cfcd6e, 0x48e0575e, 0x2f5009eb, 0x8fde5892, 0x12e50fc2, 0xdefb0fcb,
-	0xbfcdd3eb, 0x87e78229, 0x2c883f01, 0xe74fc97f, 0x0bf37b7d, 0x66792f98,
-	0x6875fb53, 0xe941bcdf, 0xd9bfe000, 0x7fe8fc4a, 0x950e50f8, 0x6f988836,
-	0xe67f244d, 0xaedf952c, 0xfe2cbfe4, 0x5de11583, 0xcbe4d5ba, 0x6e97efa3,
-	0xf3063a3f, 0x30079611, 0x49bbc7bf, 0xde1fe760, 0xfdf031b6, 0xf2c4a950,
-	0xc176f470, 0xe71648f0, 0xaa2d78ea, 0xa136ec00, 0x57b3dd8e, 0x6c937f5a,
-	0x0775c552, 0x2f38ca45, 0x63e787ed, 0xb8678a5e, 0xa7d6011f, 0xc94ddfbe,
-	0x9178e9bf, 0xa3695fd1, 0x695cf68c, 0xc84e96dd, 0x6c3d2cc3, 0xb2b73f42,
-	0xfc11acee, 0xbc3fdcd8, 0x55f3f784, 0x3c9a8a36, 0x6ff91ebc, 0x04dfa275,
-	0xe50d5bf9, 0xeb437e78, 0x0faf58ed, 0xb17a079f, 0x7fc5ad3c, 0x4bddb1d8,
-	0x95f8b841, 0xbef0d9df, 0x368dd6be, 0xeea9eefc, 0x3da7f9c2, 0x57eaddf2,
-	0xeddf305f, 0x0941fc34, 0x5d48baeb, 0x931d60be, 0x997d746b, 0xc4e261f9,
-	0xa5eb7b41, 0x7c839f2f, 0x7fad8eec, 0x5bd60e7b, 0x9ee75ff6, 0xb21abc83,
-	0xf60ec233, 0x0fa6e548, 0x79559f30, 0xd99224af, 0xfe2f9d7f, 0x3b80f30e,
-	0x6139343f, 0x271dceb4, 0xd1bd8086, 0x04dbe5b9, 0xba5defc8, 0x73c61a63,
-	0x4dcb6e96, 0x05e26124, 0xeb74094a, 0xb21e43eb, 0x0dcd5f1e, 0x73ff98cd,
-	0xe41be286, 0xb17f3043, 0x83e59cbe, 0xe2de783a, 0xdef9f0e6, 0x1b14f23d,
-	0x193f5d66, 0xb30362e4, 0xaf9a2e0b, 0xf1e28078, 0x6fe03ef2, 0x4f2e6af3,
-	0x0cefe3c2, 0x54f141fc, 0x57cda913, 0xe161b2fc, 0xb6819e6f, 0xf35eb886,
-	0x807dfd15, 0x3e4f929b, 0x58f5d22b, 0xd6cdf024, 0x287e63df, 0x01cf2de0,
-	0x21cbf9f2, 0x293e1710, 0x10fe3007, 0xefc261d8, 0x1c774b2c, 0xdce9fe42,
-	0xb5f31fb6, 0xeeebcf09, 0xcb1fc124, 0x9eb1e5c3, 0x96560dca, 0x0fe1c8e7,
-	0x1b0e9079, 0x8ef9e73e, 0x3c958e8c, 0x1ff2dec8, 0xf853225b, 0x4f2c2a7d,
-	0xc7c37cb3, 0x8430af3c, 0xe002612f, 0x7982fda9, 0xec1c0aa5, 0xd42b8700,
-	0xf3e1bcf9, 0xdf79834c, 0x3f805f1c, 0x7cc1d390, 0x041f5a5d, 0xe13e9bf9,
-	0x0f230910, 0x3cb3d73a, 0xfc394ee0, 0x7e4accf7, 0x4f9eb36f, 0xebcb7d7d,
-	0xbffad8bd, 0x221a7c2f, 0x1eae381d, 0xc3e71d4e, 0x9ce3f1cb, 0xf7f07fef,
-	0xfe826521, 0x81cf93fb, 0xda1bcb1e, 0x899f788d, 0xfdf13fe2, 0x5a78f076,
-	0xf31126c7, 0x9bea6b3e, 0xe5eb8e51, 0x273f0545, 0x1bf7afd1, 0x468adebe,
-	0xb63a27a6, 0x3a167d5a, 0xaf5bc74e, 0x6c573d21, 0xd3bcc76e, 0x18af75bd,
-	0xcbe754db, 0xaa7c27a0, 0xbcbc77f5, 0x6dca0c6b, 0x7e98bf7e, 0x9b14631e,
-	0xfc29b2a7, 0xcf9b953c, 0xec59e66a, 0x2dda37ad, 0xb4ef9f17, 0xc609bae4,
-	0xeccadd3b, 0xe2f5d3a5, 0xf9985f0c, 0x49bd714f, 0x0f3b2d48, 0xef12faa5,
-	0x7bb2b359, 0x245b44d5, 0xad4b5fda, 0xf7470e13, 0x7988d283, 0x79aa2b2f,
-	0xce7dcc9e, 0x0af7c024, 0xd604d5eb, 0xabe012bb, 0xbb65e3f2, 0x26dd809b,
-	0xa867e527, 0xf59459cf, 0x8819fb1b, 0xa5ff854f, 0xe08919d6, 0x3bc9127f,
-	0x5d71d608, 0xe812d7ca, 0x8b0f56bf, 0x47f393df, 0x56f3c187, 0x8e27bec9,
-	0x553adb8e, 0xb5e84270, 0x34fbdd27, 0x2e998671, 0xf8b17ded, 0x5fdd1c0d,
-	0xf680d3b7, 0xb7e0d5a0, 0x1ac42ed3, 0x0e849ad1, 0xa43883ac, 0x0214fc04,
-	0xf41e21f3, 0xfdc16798, 0xcd4236c8, 0x94e7e853, 0x449ff734, 0xf774904f,
-	0xc30390a1, 0x385abd28, 0x39712abd, 0x8e9bfb2b, 0xacf786db, 0x6a91a4c4,
-	0x5635df20, 0x4f0dda37, 0xe869fbf0, 0x41e4246f, 0xa74892c4, 0x3a26fefa,
-	0x38fbe6af, 0x1ea6af3a, 0xe3d6d2e3, 0xc2c74866, 0xbe3897e9, 0x05a2e98e,
-	0xcd3310e1, 0x796bf8a0, 0xeb4213c3, 0x4e27898e, 0x6b5fb43f, 0x2801efc1,
-	0xfbd5797b, 0xebb458b0, 0xc8d3eba6, 0x36b4e889, 0x53ad81af, 0x1c4edcf3,
-	0xa5dfee02, 0xabd74e7d, 0x714617a9, 0x09112779, 0xdcc59de4, 0xbbfc384a,
-	0x5fbef035, 0x013837da, 0x5fb843f0, 0xcf9025ed, 0x41f7cd12, 0xb7f4d7e7,
-	0xcd807443, 0x0c871daf, 0x43bfabb2, 0xbfeb9cbd, 0x25fc9651, 0x329e9451,
-	0x62615687, 0x49125676, 0x9ba5efc3, 0x4a7ca1fa, 0x79839659, 0xa32d4227,
-	0x086b61ab, 0x00b0cdf2, 0x3fba9bcf, 0x9351ed12, 0xd2237899, 0xe2367be1,
-	0x1661d395, 0x7043cf1f, 0xa1d0372c, 0xd69455a4, 0x814d7be8, 0x8a42c31c,
-	0xa2687a84, 0xb94657e3, 0x9f28a3aa, 0x2774ccd6, 0xf6c2c619, 0x3bb95ede,
-	0x52f6b90b, 0xaa1a0888, 0x1969eef7, 0xef04228c, 0xbdde20f1, 0x6bc6807b,
-	0xec153a95, 0x6d7f9df0, 0x32eeb064, 0x9b5f7953, 0x3e8feac2, 0xdc2577b4,
-	0xcf6e9337, 0x49f6147f, 0x7851f6cc, 0xd58fe5de, 0x9bddf3dc, 0x39d6517e,
-	0x173f8372, 0x3abe05ee, 0x1df5eec0, 0x777e0d6e, 0xa3787a8f, 0xd1fba945,
-	0xd86fc88f, 0xbcad728f, 0x1bb63f7e, 0xa1cb4ea0, 0x81dcfe71, 0x472f9f74,
-	0x74969a1d, 0xa1af1d29, 0xd93e0930, 0xd0ea357f, 0x30eef81e, 0x578f8704,
-	0x82141eee, 0xc3fcb483, 0xd5932d3d, 0x0f70f870, 0x857d21d8, 0x7d0fabc3,
-	0xebe87088, 0x6c5d29be, 0x935cbc07, 0xd6fbc06d, 0xc16c38ae, 0x45fd0af8,
-	0xe3e23ea0, 0xbbe5efac, 0xa11fc56c, 0xd354ece3, 0x429ef297, 0x4dd1bd57,
-	0x628fb12a, 0xe96a6cf7, 0xf5ca2ba7, 0x25abac36, 0x358f75ca, 0xf78ff71e,
-	0x76e35c00, 0x0b8ea73b, 0xb8b135d1, 0xeefdc1c7, 0x5bf32ca3, 0xf2f254a3,
-	0x6225ec9a, 0x81c9c40a, 0xfb43e217, 0x8de65f89, 0x19f74118, 0xde6032ef,
-	0xfb8b28fc, 0x2b63cc20, 0x7721f808, 0x1ee20aec, 0xbe218827, 0xd9abe650,
-	0x9af5fcc1, 0x396f8342, 0x6015ef3b, 0xb47d10bc, 0xc023e8e9, 0x1db1a3e8,
-	0xa9a2a3e9, 0x6347d19d, 0x06644e75, 0x3f03373b, 0xc60496bf, 0xa23bde02,
-	0x51269abe, 0x151a1ffa, 0x91ba01a8, 0xe5a6e7bd, 0x3d708a5d, 0x7c3f161d,
-	0x7abeca7d, 0x4b6d6fc3, 0xe06943ca, 0xe033ee4f, 0x37029779, 0x858c5fa5,
-	0x58b6c5e5, 0xfc035fdd, 0xedb4272a, 0x6d6fed85, 0x36f31f79, 0xd86efb6c,
-	0x66dbef05, 0x42390c53, 0x5beed6f3, 0xd767f78e, 0xd87dd806, 0x05e024d1,
-	0x3c3bdebd, 0xe104ff18, 0x1a4f7601, 0xf91da3c0, 0x5eff1365, 0x7051ab2c,
-	0x1a1f9e81, 0x890deec5, 0xebf3b0b4, 0xd7111621, 0xcec2c439, 0xbdf7e259,
-	0x95bf8225, 0xfb01bf75, 0xa69943c7, 0xbcfdffde, 0xaf89a4bf, 0xe854f82b,
-	0x28d24a89, 0x4ce47fb8, 0xa2d13b8c, 0xa8d89fa1, 0xca78d514, 0x88788f7b,
-	0x47aa0ef3, 0xff3dd8af, 0x94abd02e, 0xfc00be7e, 0x968dfb04, 0x4a6e0023,
-	0x70cfa07f, 0x0defa1f8, 0x1e60f987, 0xecb617b0, 0x3de2225e, 0x6bc47d1a,
-	0x491bdc26, 0x914667fb, 0xfdf4adaa, 0x425a68cc, 0x13d78e3d, 0x2b207d79,
-	0x1a713f53, 0x3d7cfa04, 0xb64ebb8f, 0xc931fcf0, 0xd186ea3e, 0x5c766750,
-	0xea245256, 0xe16f8505, 0xb738080e, 0x75f9f896, 0x00c5204a, 0x58f85378,
-	0x56fc180a, 0x2452b4aa, 0x18f20187, 0x7dd0f1de, 0x9dcbbd4b, 0xdf652fab,
-	0xcf9fea71, 0xc1f9ebe4, 0x3d17f5f6, 0x099eefbe, 0xb7372df0, 0xad03723d,
-	0x0e7a5c57, 0x479707cf, 0xa1795c55, 0xebf42f7b, 0xdbfce77f, 0x4d874051,
-	0x7ec298df, 0xe1c3550f, 0xc029e2d6, 0xbdf932f7, 0xc951242e, 0xb1e55633,
-	0xcbb71b42, 0xf8299510, 0xffaced1c, 0xf8081140, 0xf0b14af4, 0x9e32547e,
-	0xe5d14e1f, 0x9f87fead, 0xc132f9c5, 0x71250030, 0xcf3628c9, 0x324ecc37,
-	0x9ce0ffd3, 0x173f1a69, 0xaf72477b, 0xdef1d2b0, 0x357cec21, 0x19aaae33,
-	0xc6c4c4ea, 0xfbda26cf, 0x6b13320a, 0xb8c2c6a7, 0xdf18c9d1, 0xdaeb35ca,
-	0xc812bd53, 0x8c9a9269, 0x88d38979, 0x7a633eca, 0x08eeed03, 0xe3902eba,
-	0x742c8cd7, 0xe7ede54e, 0x4d43ffe8, 0x2a99f6e4, 0xc72ae37f, 0x8d54e75c,
-	0xf78b52fd, 0x9fe9fd01, 0xf2e1ede2, 0xfce33e2c, 0x77c9e2df, 0x1eb3f9c2,
-	0xe10e399e, 0x27a3ab7e, 0xd470f5dc, 0xab815dc3, 0x9fd98e1e, 0x86c6a738,
-	0x2e1e9381, 0x48ed48d3, 0xdc0a63d0, 0xc77970f5, 0x9de2e8cc, 0xabde1334,
-	0xe0c48ef8, 0x23350ef8, 0x9ba41ea1, 0x01ef1168, 0xf5e28cce, 0xbab04737,
-	0x64a8ef82, 0xae1eb7c4, 0xc666387a, 0x58e3f7f1, 0x2f00bdff, 0xe202e509,
-	0xcc9ba147, 0x31ddaad4, 0xec507a2a, 0x2e1c69eb, 0xfb46bed4, 0x8ade3739,
-	0xafb02671, 0xe08425a7, 0xd6ce5b96, 0xf2dc3b95, 0xf4a9f83c, 0x72bfbc75,
-	0xff3fe10a, 0xca2f3c14, 0xce0555e4, 0xdad1be53, 0xa69ad3c9, 0xc338829f,
-	0x7efb9350, 0x1080cfa0, 0x1475e783, 0x707447ee, 0xd767bed7, 0xf870f5d6,
-	0xb131fc03, 0x3a14bc27, 0xe3c2c0fb, 0x20c8034e, 0xbcc797b0, 0xf20d1196,
-	0x86c5349b, 0x715c4b8d, 0x0e383f38, 0x63a457a7, 0xcf83b881, 0x423fa9ed,
-	0x5aa3ed8e, 0x36c72552, 0x96d3ee8b, 0x4c729ef8, 0x8e64d3c1, 0xbbc4c987,
-	0x934be20b, 0xd045f489, 0xed0e481f, 0xe7d95bbf, 0xf6103240, 0xc1c58379,
-	0x67df3fe4, 0xbcd4df70, 0xf8b3f984, 0x0b6659fc, 0x02435f7e, 0xce104752,
-	0x91df7829, 0x5a1b18d7, 0x4fbf9287, 0x66115486, 0x7bc3cdcf, 0xc85c29ae,
-	0x75a15177, 0x8482ac98, 0x75f0fdf7, 0x7b33a99c, 0x5bad8f21, 0x9d814774,
-	0x1bec21d7, 0xfc93fb83, 0xe9ff4023, 0xee35cfdb, 0xda7680ae, 0xf1fb08af,
-	0x59162ff5, 0xc3b021fc, 0xb93e7be4, 0xb2953b77, 0x8509ea35, 0xfbe0b37e,
-	0xde81cbd4, 0xdd6103fd, 0xd1d54053, 0xf659e772, 0x6376431d, 0xecf304ba,
-	0xff7966e9, 0x8125c439, 0xdfa7ab7d, 0xa1a74bef, 0x08604578, 0x5d8a29f8,
-	0x1eead536, 0x57cfa569, 0x9b66eff3, 0x05188ece, 0xf4c1f978, 0x4f4b4074,
-	0xba511d0a, 0xecf00f1a, 0x69fcf8ca, 0xcddfc730, 0x7a009738, 0x43dfb151,
-	0x026b8a76, 0x3b37a7ac, 0x3dd5897e, 0x3b017ac5, 0x2e67b15e, 0xdd9087e6,
-	0x74a641d4, 0xcbc71b74, 0xccab733c, 0x600fcdee, 0x48eafdfe, 0x473b5ee5,
-	0xb791d824, 0x54d94ead, 0xd586e707, 0x6b7efe2c, 0x83f1ac95, 0x86dd90dd,
-	0x66fbb3ef, 0x6da65f6f, 0xfe604cff, 0xfb57a17e, 0x3412589c, 0x9cf6edf7,
-	0xc035e0d7, 0x3123c3bc, 0xaf3f413f, 0x79fa7f7e, 0xe6adf3f5, 0x636ad57e,
-	0xcaa748ed, 0x6560592e, 0xaaf750f6, 0xcae0ebc7, 0xe7e0deba, 0x93480f36,
-	0xb5abf754, 0x082c8ead, 0x328c6f77, 0x79ef029e, 0x00e2cfc4, 0xc3dff255,
-	0xe59b83dd, 0xde81f166, 0x98161de6, 0xe1a0768a, 0xf608bf49, 0x4100b0fc,
-	0xe02b3bfb, 0xf8d02c32, 0xee4fcc01, 0xbdc007e1, 0xd65eb426, 0x01f98bb0,
-	0x4fe8d5f5, 0x027f5194, 0x387accf4, 0x17c01e9b, 0x41fe8694, 0xfc85dfd0,
-	0xcfb82ca9, 0x12c3fb92, 0x5ad497a5, 0xf5a37fd6, 0x096ae35d, 0x927755fc,
-	0xe363294c, 0x98d7efc3, 0x93555fa9, 0xf508224c, 0xf8785eab, 0xc06be9fd,
-	0x09758e5f, 0xad287f70, 0xf7fa58d7, 0xf8debfdd, 0xb81afef0, 0x65fa946f,
-	0x7f2aaceb, 0x78fe37b7, 0x0b918c04, 0x3dba47f0, 0xa1f0237f, 0x8a68af12,
-	0x111f7ce0, 0x8068bba4, 0x57274297, 0x7e8f9b2f, 0xe725c445, 0x589e4087,
-	0x16ffc716, 0x46c38f2b, 0x129ff7b1, 0xbf905bdd, 0x023f3adf, 0x8cefcbe2,
-	0x5cfe8a3c, 0xe7c59593, 0xd04a79f7, 0xb9f0527e, 0x3f702acb, 0xf8103fc9,
-	0xcdf1daed, 0x6497e071, 0x43de02c9, 0x9efb24da, 0x7900cf4c, 0x82bedb34,
-	0xa26b296e, 0x6b13bf11, 0xbc0ff08a, 0x35a7655b, 0x9b4cfbf1, 0xa81deece,
-	0x661e63ce, 0x4565ddcd, 0x308bf3fa, 0xeec6567e, 0x7befa0c3, 0xfd212fd3,
-	0x7f4012e1, 0x13fbf390, 0x61a8fcf0, 0x42e20d8f, 0x827efc1d, 0x09cd0d33,
-	0xbe5969f3, 0xf0362fe5, 0x70e7ded7, 0xe2b52338, 0xdb654a3d, 0x83ffbc44,
-	0x0b709bce, 0x161ba7c4, 0xf7efb264, 0x8a6777d8, 0x67ff4cfe, 0x167cc0f3,
-	0xc8efc434, 0xb2727b14, 0xf583ebd9, 0x188b5535, 0xbbac9e2f, 0xbf0a6c37,
-	0x5f6f4c37, 0x712ab49e, 0x87cc04e9, 0xf3676a5a, 0x594fc6f4, 0x9f12c4df,
-	0x24b2df8a, 0xcfeb08bf, 0xc08126fa, 0x5a679715, 0x03c89e52, 0xcec89e3f,
-	0x44ac30e1, 0xcafda376, 0x6fe89fcf, 0xbe43dc37, 0x6cde5793, 0x4aeb3738,
-	0xfdfb6624, 0x77600997, 0xe0b1fbb9, 0x8a07d322, 0x1be5377d, 0x6f557c6d,
-	0x8d34e6e7, 0x41207fbd, 0xa77fb378, 0x55eec022, 0x06ff61eb, 0x7bb587a6,
-	0xe10c7909, 0xf52dbe90, 0x2947b81a, 0x3b068ffd, 0x7c02dbcc, 0x3cf80f11,
-	0x54fcf787, 0xd08dff10, 0xda20d15e, 0x927eb0fd, 0x95f01971, 0x70283762,
-	0x6cdf3c69, 0x91d7431e, 0x5f60d675, 0x3378874e, 0xcffa05f0, 0x2fbcfee3,
-	0x5357f40e, 0x8273c240, 0xa3bbb3ac, 0x60e4a816, 0x3e0379d3, 0x5bfcf37f,
-	0xd881e7da, 0x2dbde0cb, 0xef17e606, 0x28f7fbde, 0x9e6f4b90, 0x82f1c6ef,
-	0xbb4f4376, 0x6b91e118, 0x67718315, 0xc44c5db5, 0xb79003ac, 0xaa9a2d35,
-	0xbb77a131, 0x7213fb37, 0xb4f495bf, 0x1ec0721f, 0x11d8c311, 0x3e74ce1c,
-	0x6f48f809, 0xe36e5c57, 0x24c1e6f1, 0x6ca3ee1d, 0x18b71f3c, 0x8a6e1fbf,
-	0x7d472fb2, 0xaea5eccc, 0xbf1fa7dd, 0x13ef9e06, 0xe711fdd9, 0xb7a7e445,
-	0xda1e2e76, 0x2a5be2a6, 0x5f4f1139, 0xf9db3ff5, 0xd5ffed06, 0x4716489e,
-	0xa9979c97, 0xf50877bf, 0xf97871f7, 0x38f3b007, 0xd7b800ef, 0x2fdb07e9,
-	0xfafc3d1d, 0xc3da1b3c, 0x1ea0e981, 0x376bac46, 0xac5bfe02, 0x90d9d7f9,
-	0x00a3eadf, 0x33925e2e, 0xf3804c90, 0x7403927a, 0x7626a815, 0xb5b627f0,
-	0x97800c18, 0x98c98d8c, 0x9f89b3a7, 0xafaa2e57, 0xe8ab2635, 0xef3f1162,
-	0x877b293a, 0x1f9eaac4, 0x72f931b0, 0x6fe94f72, 0x43e34f30, 0xc61e1913,
-	0x31b06cde, 0xd18afb7d, 0xe866cd7b, 0xdf80c477, 0xfbdeed0d, 0xcfb85efa,
-	0xc761d178, 0x3dff8858, 0xbf607362, 0x6a9b7dc6, 0xf1b7cf20, 0x5452d013,
-	0x14286caf, 0x37de740d, 0xefc58388, 0x1fd0180e, 0x893dc60f, 0xf9f60e2b,
-	0x1bcf5f10, 0xf9cd062d, 0xdefc1bd8, 0x326d7bdd, 0x89b12fb6, 0x2dadc788,
-	0x37a07139, 0xbbeeac5a, 0x8e2fa06d, 0x12c0d5b5, 0x629f7894, 0xb03c4daf,
-	0xf4d19af5, 0x061d89cf, 0x71dba03b, 0xf61179e0, 0x484938eb, 0xd87a408c,
-	0x8f3c746f, 0x3a37bc7a, 0x1d7478d8, 0x2abf016f, 0xff9aa7f0, 0x7f5a34a1,
-	0x858a55a3, 0xfe052efc, 0xf9943eca, 0xb5c4f51d, 0xe4ac82de, 0xb8817ada,
-	0x3a5f92b3, 0x7f944ece, 0xd2e9012f, 0x6a3d7368, 0xda0ef663, 0x30f727d7,
-	0xae15e8bb, 0xe1524947, 0x829f8050, 0x8b1b7aa7, 0xe9eb2a33, 0xdbdffe6d,
-	0xca549e98, 0x9bd74bef, 0xe9178764, 0x0fcb1b66, 0xe6fd7877, 0x6b23c854,
-	0xcf7fc54c, 0xfb679549, 0x93e7a47b, 0x1b057bda, 0xf8060cdb, 0x8762ac0e,
-	0x6de68310, 0x20ebed1f, 0x48f5499d, 0x09878d7f, 0xdd6971f2, 0x48ee2c9d,
-	0x7fbf0de5, 0x81d1cf0d, 0x7a79f87f, 0x1396817f, 0x18afd69b, 0xdbf5f088,
-	0x7042af80, 0x65037ca2, 0xe811ad55, 0x5652d175, 0xe973f316, 0xc8dd6b45,
-	0x58eb459f, 0x5b1ee17e, 0x0ce7ae32, 0x886257a7, 0x27f9001c, 0x657f0e2e,
-	0x6e9c79dd, 0xd13c354f, 0xfa52f30c, 0x73e013fa, 0x4f63e352, 0x7a1572c3,
-	0xc641b53d, 0xb5224a71, 0x7cadf6e7, 0x18076dbc, 0x20dc4fbd, 0x5ffdc0e7,
-	0x0ec4bd13, 0x3637ec71, 0x7e41146c, 0x9cf401bf, 0xf41cf8cc, 0x0f3dc9ed,
-	0xf402fd46, 0x4081bb5c, 0x2315fcbc, 0xe2a2d929, 0x5febdd8b, 0x696ff0d5,
-	0x1835f55d, 0x158b6f97, 0x7c2bce40, 0x15fdc0ab, 0xe42af3a3, 0xfc74ebff,
-	0x2fbd953f, 0xdfb03b47, 0x9fff9c13, 0x9ff94198, 0x10d98a3e, 0xaf38c023,
-	0x07dfc318, 0xa40ff5f7, 0x6d5ca0bf, 0xbf5721eb, 0xcdb57266, 0xafe74a96,
-	0xe31bb6b8, 0x71f5c10c, 0xaa6279ba, 0x02c93742, 0x6296bfc0, 0x8bc01870,
-	0x99e815c2, 0xdfb7cdda, 0xd95c8690, 0x0f39e122, 0xf9e2473f, 0x0277ca1f,
-	0xe486bf0a, 0x6eb7c299, 0xd5d83473, 0x8056ab53, 0xe7971f5d, 0x253cfa45,
-	0x52c687b8, 0xf80a767d, 0x383c8c38, 0x57c7e5c1, 0xf762fbb2, 0x7a000fee,
-	0x221ea12e, 0x13ac87ec, 0xa51780ec, 0xdd8eb1dd, 0x5a3c3ac3, 0x2bbf9cd0,
-	0xef0c1ff5, 0x41fb8f40, 0x7c634787, 0x3c84603a, 0xa63e11d5, 0x839088c7,
-	0x570c40fc, 0x5b3e000f, 0xcdd7f544, 0x4a75fd2a, 0x553a45ae, 0x347970e0,
-	0xc55f5f93, 0x95ff7db0, 0xe21585d3, 0x2f73aa85, 0x024890ea, 0x605167e3,
-	0xf8c22e7c, 0xba4cf6a7, 0xdafde90a, 0x076ef4f0, 0xfe162aff, 0x48f5a73d,
-	0xec33319f, 0x13cb1df8, 0x46223392, 0xb0f91f63, 0x57f1bddc, 0xfd01d7e8,
-	0x46f7bf02, 0xff4025ff, 0xfbdd0c24, 0xf0abdd28, 0xa501d0a7, 0x55a26b8b,
-	0x174f41f2, 0x02a379ca, 0xe7745797, 0x33474f95, 0x9780b079, 0x66f25e8e,
-	0x60fcfd94, 0x81ec9f3c, 0xcf0cf9e7, 0x7c02be21, 0x67e1f22b, 0x3dafe117,
-	0xaf6c76d1, 0xe60174f9, 0x73f2d4a9, 0x9f3e7aab, 0xd1a5eeb2, 0x4b7ce682,
-	0xca34ee7f, 0x5a2bbee2, 0x48ea3e77, 0x34c7d10b, 0xd92ecf6e, 0xff73c268,
-	0x7802d02d, 0xbdfecddb, 0xbb3de56c, 0x0a4f0d44, 0x4cd115ea, 0xe1f42b8e,
-	0xc3246658, 0x55f2ffa8, 0xc86ee172, 0xab59f9ff, 0xdd346f37, 0x77a316c7,
-	0x07e8b5f6, 0xf182af38, 0xd833caaf, 0xc6241f21, 0xde201765, 0x7c0a2481,
-	0x33cd8fb8, 0x1979d52e, 0xe70ec9fa, 0x0f079038, 0xf8297c73, 0x9bd0e055,
-	0xaf0deb9e, 0xe27c387b, 0x8e5ebb79, 0x9efe7314, 0x5c5dfbc2, 0xe045788e,
-	0x2f711b27, 0x59fd6117, 0xe505fe4c, 0x73c11648, 0x727597c9, 0x5e9fe5e4,
-	0x91acbc8e, 0xc2da1323, 0x0bfa11ca, 0x1bf1ffcb, 0x4b1da216, 0x63b7870e,
-	0x3d334677, 0x93fa0f1c, 0xb2f78bf6, 0x3987def3, 0xc48a52dd, 0x0ddac9bc,
-	0x5713cc26, 0x366d90e4, 0xaf7f81c9, 0x16fa06d9, 0x1f76cd7a, 0xc5e70c9e,
-	0x9c074649, 0x03929f5f, 0xd453f788, 0xfa45af01, 0xc7fbc7c8, 0x0223c8c3,
-	0x47ef12f1, 0x9cefd083, 0x9f213626, 0x5046992c, 0x78deee7f, 0x4955d205,
-	0x74008a5e, 0x23175a5b, 0x54ec7b40, 0x94e401bb, 0x962b8fb2, 0x71b0c819,
-	0xd40707c8, 0x6f0ae472, 0xcdbbfe15, 0x49dce343, 0x47210c72, 0x33fb3d1f,
-	0x8da8bc75, 0x22f1d5d6, 0xfbe07f5a, 0x468e8bc4, 0x78801e07, 0xae6c3fd1,
-	0x94779876, 0xea28ff25, 0x912ac4b7, 0xc5d6e4a8, 0x4a1fb7ec, 0x2e3c952f,
-	0x34a95a45, 0x81c4d04e, 0x6073ab6f, 0x582bf81c, 0xe380c54f, 0x7870c34f,
-	0x7b5846af, 0x1fa3ad9b, 0x13e40b97, 0x97e8f882, 0xfc42255f, 0x063b9145,
-	0x2fe2ac7b, 0xa197900b, 0x037fdbf0, 0xd7b57d1c, 0x00008000, 0x00088b1f,
-	0x00000000, 0x7dcdff00, 0xd5947809, 0xe77df0d5, 0x24cb2d9d, 0x7642c993,
-	0x03bbec26, 0x4eb1ab09, 0x04906008, 0x8d441007, 0xb0900938, 0xd2910364,
-	0x208196d6, 0x2b188a06, 0x0eb154b5, 0x4551fa14, 0xdb1ab61b, 0x1a4013a0,
-	0xad563414, 0x61a5afd8, 0x80891d91, 0xe58ad3fd, 0x7bdce73b, 0x264ef333,
-	0xe79f6a02, 0xcdcf0f0f, 0xcf7bde5d, 0x773dfb3d, 0x79632d49, 0x9b19223b,
-	0xed50b390, 0xccc9a906, 0x831b163c, 0x43632f1f, 0x087a3e79, 0x6b9859e6,
-	0xf26b6320, 0x01de7975, 0x9fc75d8c, 0xa269fd3b, 0x678e3e15, 0x30d6fe6c,
-	0xb53349eb, 0x7fe1d767, 0x268c5d79, 0x649f595f, 0x9fc7d93d, 0x24bf8f9f,
-	0x4c33ffc1, 0x2b1812cf, 0xe1a7e263, 0x70ffdfcb, 0xdfc7b418, 0x54dec655,
-	0x805689dd, 0x12dcdca7, 0xd8ceddd5, 0x13c7f933, 0x52d491dc, 0x223ddf87,
-	0xb97178c6, 0x71debde3, 0x55de798c, 0x0fc816d9, 0x4a3d1936, 0x64e2fc34,
-	0xe8826b76, 0x06947e0f, 0x041967c5, 0x55437ff9, 0xfe97632c, 0xc5f4a3ad,
-	0x32f2b89f, 0x7a8afbe0, 0xb439639d, 0x185068ab, 0xd1cc62cb, 0x19cd7995,
-	0x4785d58c, 0x5fd0620d, 0xa748bece, 0x292fca01, 0x8329af66, 0x870800d1,
-	0xa23fc241, 0xd41b7d35, 0xd8983757, 0xca5ec86a, 0xe119ac61, 0xd9a23bd5,
-	0x077e3f00, 0x0fa67e1d, 0x6bca00cc, 0x630b2e1d, 0xff78c29b, 0x7b64c29b,
-	0xb483347b, 0xecd192db, 0xd7a7c004, 0xf40d1633, 0x6983c481, 0x036e92f6,
-	0x1f3099f4, 0x8018f33d, 0x3eadd94e, 0xadd2f115, 0x9163aed5, 0xadf471fe,
-	0x4ddbe68c, 0x6039d76f, 0xf7813afc, 0x543b4d9d, 0xd873e03d, 0x156ada98,
-	0xf728d2d2, 0xa8f3c458, 0x2c6aaaec, 0xa8f7cd8f, 0xa59f686e, 0x00b3ed54,
-	0xe678d85e, 0xcce502d8, 0x848f8307, 0x18d616fa, 0x2398d905, 0x2828ce2d,
-	0xd9c6751f, 0x1de60038, 0xf60a62ed, 0x1a32d8c7, 0xcba45fbf, 0x38b2fd85,
-	0xfd0052a7, 0x2307fb0c, 0x767ec8bc, 0xec568d36, 0xf35c6f00, 0xc01ec518,
-	0xe24d305f, 0xfeccf5ab, 0x73d7ec53, 0xba40e748, 0x7398ebda, 0xfaefb423,
-	0x2c31bf72, 0xd2bedfca, 0xb778d0aa, 0x46b9ddbb, 0xd879f346, 0x9c8fdf0a,
-	0x0067ddee, 0xf1cf8678, 0x03da33ec, 0x519733e6, 0x1e2d297f, 0x11d2479a,
-	0x8ba60e77, 0xcfd4312d, 0xc6be33a8, 0x4baed001, 0xca07cc15, 0x543f9ad3,
-	0x5569af10, 0x71d20acd, 0x825ed367, 0x3f79b537, 0xea11814f, 0x7201dd20,
-	0x8f301755, 0xcd1d16c5, 0xa145b163, 0x99c5e574, 0x7fa82e89, 0x6c5eeac4,
-	0xc79fea19, 0x62771cca, 0xbebff415, 0x7cfb5ba9, 0xb7bc027b, 0x278867c1,
-	0xab72dfd9, 0xb269fa91, 0xf3847fb8, 0x72de9cab, 0x476f7900, 0x48a39fd3,
-	0x88e21a2e, 0x8e8709be, 0x96123d13, 0x78a0ce00, 0x0a85a1fd, 0x85f5aa83,
-	0x23a53340, 0xddb8279e, 0x8899318e, 0xf89f806f, 0x09311ac7, 0x8c62f2f8,
-	0x91c706bb, 0xd91427ed, 0xb45f5022, 0xcf77c5e7, 0x598e652e, 0xfbcf003d,
-	0x6eb2778b, 0x12f77748, 0xbb7b7ba4, 0x21878f81, 0xb38b313f, 0xa4bbfb16,
-	0xce38e9b0, 0xf942984b, 0x979e064b, 0x95abfaf8, 0xeb11ebe3, 0x7896c5a4,
-	0xf02b278e, 0xbc614bf1, 0x7a1eb05d, 0xb3bfcad7, 0xcd617e0b, 0x1e705f9c,
-	0xbb64bfa8, 0xdbdfa2dd, 0x3d5cee9d, 0x08cd93e7, 0xde11c8e7, 0xc3b7c87d,
-	0x90fb3cf3, 0xe098d3ff, 0x27ce3c93, 0xcfbefcc1, 0x467ea36a, 0x8865699d,
-	0xb9852cf7, 0xd32ee902, 0xa1ae10d7, 0x89a3dfc8, 0xb61e407f, 0x52c378e3,
-	0x800354aa, 0x13acc712, 0xdec67758, 0x5da9dab6, 0x3ee708e6, 0xd3ab37e4,
-	0x207cf245, 0x2be54ac2, 0xc07f3833, 0xfc407ff7, 0x2ed3cb05, 0x7e01a394,
-	0x7e438a39, 0x8fc8ec8c, 0xbcf013bf, 0x63a5e42d, 0x613feeff, 0x3acd71ff,
-	0x0c9d02a7, 0x65e9123f, 0xa2f874d0, 0x8fe1152a, 0x00ffc063, 0x358e6da0,
-	0xa52ce507, 0x5d20a1cc, 0x875c229b, 0x230fd4ad, 0x4732b9bd, 0xef86ade7,
-	0x893b46e6, 0x3ed8df7e, 0x366667ec, 0xc01f6fcc, 0xe115fc1e, 0xb6b07b03,
-	0x6ff4f508, 0x3d4469ff, 0xd7f2976a, 0x38a22434, 0x48ae3f80, 0xf7a7e0bd,
-	0x410bd271, 0x73d60ef4, 0xebf6f4c1, 0x039ead05, 0xf4e05d7c, 0x9f226770,
-	0x522f35c5, 0xead07eb9, 0xd1e8ceb5, 0x3a083f41, 0x7e708a5c, 0x0c5cf881,
-	0x7ae38832, 0x583eb346, 0x0e1d99de, 0x76a4898b, 0x1c3b45ff, 0xd1df1316,
-	0xadcceb0e, 0x47c01507, 0x576a8379, 0x8fd50a61, 0xff489cd9, 0x8714eb17,
-	0x41a4e509, 0x71787e25, 0x4bd93865, 0xbb67ef09, 0xdbb107a3, 0xcff21520,
-	0x8ec9dddc, 0xf188c656, 0xf18790ed, 0xd679592f, 0xc5277568, 0x1793e804,
-	0x4308be1b, 0x644ff73c, 0x62c64e03, 0x0ed6a70b, 0xf0290883, 0x537f09bd,
-	0x6b83af10, 0x69ac1454, 0x95269dee, 0xfb1dd6e8, 0xfe5ace1b, 0xbd700d9c,
-	0xceb46dbc, 0xf537c81d, 0x05ec6757, 0xb8232bf8, 0xf7b4be5d, 0x33e42f5a,
-	0x92f77f59, 0x3f7bd262, 0x13192b07, 0xeedf1fa0, 0x61eb8273, 0xd53d6856,
-	0x2a76871f, 0x850023d7, 0x7a3ee651, 0x70d427f4, 0x27f5aa87, 0x7baa3988,
-	0x7f107e02, 0xbf84e18d, 0x77209eea, 0x48e70419, 0xc5bf7fec, 0xfca092c8,
-	0xb623c80a, 0x037f7093, 0xe2074778, 0xaa6f0fd1, 0xe08454f5, 0x5f0fd50b,
-	0x0e905d3b, 0xd16abfd0, 0xb12e3cd3, 0xb3d20770, 0x4864e8ce, 0xe151cf7f,
-	0x55ba081f, 0xd4bb9e08, 0x1b88f430, 0x91e2f7e6, 0x7f7e0754, 0x984afea9,
-	0x46fd122e, 0x979c14f7, 0x851ad69a, 0xc35f70f6, 0x032dbe95, 0xc54dbf48,
-	0x4e872bf2, 0xbe03dcd8, 0x8466fcd1, 0x7e7687a6, 0x9ac8fa95, 0x6150ff40,
-	0x7cc17e7c, 0xfe3434a4, 0xf244194b, 0x7a1f50c7, 0x1ab799d2, 0xa072bde6,
-	0x997ba7e0, 0x983ee51d, 0xabab46de, 0x6e402622, 0xaaed15ff, 0x9c70b842,
-	0xcf342194, 0x741f9885, 0x41a66678, 0xc31bf387, 0x7f4a6ed0, 0xb0effd0f,
-	0x4eff7e21, 0xfe7dafce, 0x3a0daf3d, 0x3fbe68c4, 0xf80071c6, 0xaf803ae5,
-	0xeac18c12, 0xfb79c08c, 0x62e51e88, 0x48e6e57e, 0x61f30a9f, 0x5a170cbb,
-	0xd6e81ea4, 0x4fa07e11, 0x19e7c20d, 0x46e238ed, 0xd235fefa, 0xd1f88d51,
-	0x5fd15b37, 0xc6acf985, 0x28a2367a, 0x2fdfe711, 0xf505b9d2, 0x18cb4bfc,
-	0x57a5f3f1, 0x4c137798, 0x1d7efb76, 0xd646cbf1, 0x9fbef88f, 0x570cf2ee,
-	0x3af3c924, 0xb9ab3b84, 0xb77a8756, 0x43aed7a7, 0xb9b7da7d, 0x3e23a74e,
-	0x8622ff70, 0x5799e4fc, 0xff5f00f4, 0x37ea556d, 0x686f07e4, 0xaf40ef7e,
-	0x92f481cd, 0x7c16cb78, 0x43788d90, 0xbfaad083, 0xe3f662d0, 0x52c3e80d,
-	0x63fb1d6c, 0xf11d25ac, 0xe9faf8d4, 0x5fd02d5e, 0x67a71bc5, 0xfe2a5e20,
-	0x18262260, 0xd1be87f3, 0xe59fefc8, 0x2e67f684, 0xe872ad2c, 0x257a9fc1,
-	0x85d91ba6, 0x446cd632, 0x6ebca13f, 0xa01f4381, 0x76ffa5cf, 0x8f9cd0c8,
-	0xaa1a1ffd, 0xe78065b2, 0x5de18e2b, 0xd13b0858, 0xbfa12fee, 0x472fb006,
-	0xafcf11d8, 0xff734567, 0x20f646d1, 0xa5a1fdb8, 0x7a631c73, 0xa1dfde74,
-	0xbdd361c1, 0x907e7df0, 0x8634741f, 0x18b6b5db, 0x2141876e, 0x8bce113b,
-	0x3d78b7bf, 0xc8717450, 0xfd0c5147, 0x641f5dcc, 0x2e8f807a, 0xfe47e6b2,
-	0x35767288, 0xf971d692, 0x5cca3f83, 0xe5cbf166, 0xdcf8231d, 0x70ed78ef,
-	0xe7da1d94, 0xe717df6f, 0x1ddfc009, 0x9db57f4c, 0x5c7033af, 0x7d33e346,
-	0x07a42f4b, 0x04d9e3fb, 0xaff9a43b, 0xf9c715bf, 0x74874120, 0xdbf4245e,
-	0xc028b0ef, 0x525fcedf, 0xf3247c41, 0xe6666de5, 0xebc80d8d, 0x04b88d9b,
-	0x648b6f2e, 0x37b7685e, 0x7a4712c6, 0xa3259926, 0x5f14e99e, 0xe0cf8937,
-	0x43cf8972, 0xa3a6cf83, 0x2759f15f, 0x1b6f70fe, 0xf7ced76f, 0xd74fc14b,
-	0x7ceff3fb, 0x0aec3ea5, 0x8d845df1, 0x638ae9d3, 0xf7f41764, 0x1ebe8df2,
-	0xe4ed10d6, 0x4f1832fa, 0x8d2b5f6f, 0xdf7f7ec0, 0x050bca66, 0xfba6de97,
-	0x21ca7e76, 0x1fc02a80, 0x53baa6dc, 0x9c1fc26d, 0xbe8af90c, 0xbad1c657,
-	0xd08bf25a, 0x4f30777b, 0x306fca23, 0xf77a487f, 0xfadd01b0, 0x296672a3,
-	0x318bb748, 0x4237ce76, 0x047ca41e, 0x9d3831e3, 0x50ee6460, 0x62af80eb,
-	0x98c35e24, 0x23e1f407, 0xdf640d1b, 0xf8fb5f0f, 0xf7e04cde, 0xd60c1bd3,
-	0x9ce430e5, 0x3ea5f617, 0x0673f503, 0xe40aac9b, 0x3d7ddb4f, 0x5f4bee50,
-	0x0fc85d50, 0x923c37a7, 0xf3d21330, 0x0065bf20, 0x0346e947, 0xf8d9cf95,
-	0x159f9528, 0x42fa5d72, 0x97d47f7c, 0x4eaff787, 0xf9ce3a40, 0x486989ea,
-	0x6b46ed97, 0x9690c1ff, 0x631c536d, 0x6f3df002, 0xbf269873, 0xe0e6c75d,
-	0x995d243c, 0x47af6ee2, 0xa6d53f13, 0x1f7176fb, 0x04dfd69f, 0xa0aa72ff,
-	0x3029c4e3, 0x57a18aef, 0x77dfafc8, 0xc9ec9c20, 0xf92a919b, 0xffc1be8f,
-	0x20db9def, 0xde95fb9f, 0xa09dbe41, 0x674158f3, 0xb7a45cb0, 0x9f3ccc4b,
-	0xfc9ebafb, 0x4a8b5ccf, 0x91f686f8, 0x7bfea163, 0xf40fbda2, 0x5321ca2c,
-	0x848dd7b3, 0x0da36376, 0xf7d0ed0c, 0x19f2f37c, 0xdb3bc9d8, 0x025bc7f4,
-	0xd59a33e6, 0x387f41f6, 0xca821987, 0xcf2c7a9d, 0xc7cb6b35, 0x2cfbb8f6,
-	0xad630ffa, 0x77c972da, 0xfab4d88f, 0x7381df62, 0xf3009b3f, 0x92a4392b,
-	0x7d237cff, 0xafc22efc, 0x5dbf3a47, 0x3bbe0db8, 0xf872b02c, 0x4915e9da,
-	0x142357c8, 0xd3acf186, 0xe3cb42d7, 0x665ea41f, 0x7e3edf40, 0xe63816fa,
-	0xdc51e7b6, 0xa0b119ef, 0xdff08f3d, 0x7afb1ebc, 0x8d9b753d, 0xed8233c7,
-	0xfcdcb046, 0xfe46ecb7, 0x3dd2b7e0, 0x837f4a16, 0x5ced85e9, 0x89eb06ef,
-	0xe1213b60, 0xbcb7860a, 0x0fb1a74d, 0x191ea15f, 0x8c27681a, 0xc3be2764,
-	0x6d8370f5, 0x30f5c768, 0x2f8431f8, 0xad3d30cf, 0x6adfc1c3, 0x220376c4,
-	0x0039b1ed, 0xb76b0ad2, 0x167fb208, 0x405b7ef7, 0xb6ffaa1c, 0x8dea1d5a,
-	0x418cf8f6, 0xeb91a71b, 0x9d8477d5, 0x1cfa13a8, 0xceb4abd6, 0x4eee18df,
-	0xc9b8e3d4, 0x8c96c746, 0x48f9f88e, 0xcfccefb4, 0xbeac7e95, 0x8fb1fb86,
-	0x389a5d58, 0xa893eb19, 0x5fa2fb89, 0xd9edf28e, 0xfcf34e1b, 0x420d7154,
-	0xe733d439, 0xf4016ddf, 0xf87036a9, 0x8f89e183, 0x319276e5, 0xb207f917,
-	0xd0e8f67c, 0xd5895c7a, 0x679cfb53, 0xff474fef, 0x07c6d3ed, 0x7ebf51d2,
-	0xede7141a, 0x169e1e4c, 0xb0a4faf2, 0x2e223123, 0x11ca14f0, 0x9dda41e4,
-	0x55fbe1db, 0x57245d4b, 0x9d3a5d3f, 0x2e9667d2, 0xb613faa1, 0x9adf1a0c,
-	0x775767f3, 0x35c9d3c0, 0xd989d92a, 0x18af5746, 0x59a4eef8, 0x1385f147,
-	0xbb799155, 0xd19cb122, 0xb3f6727a, 0x0278b613, 0x6c277ee2, 0x6743a27a,
-	0xfd8f8cf3, 0x9cbdfa66, 0xbda144b5, 0x23d7e76a, 0x2db5ec1d, 0xac7fe316,
-	0x55db0125, 0xb6bdcd2a, 0xb7c71d29, 0x2c7c6732, 0xf59197f2, 0x0ba9b947,
-	0xb828f6e7, 0xe72c4a5d, 0x1fa1bfc3, 0x8a7efd0b, 0x9e842b76, 0x2f3a0bb1,
-	0xb1ed38b4, 0xc922efa4, 0x81b8275f, 0x728cbe5f, 0x60b84776, 0xd313d65d,
-	0x7c785d61, 0x2ac5b16e, 0xf0a9c3f8, 0x5fab8e75, 0x5bf8886c, 0x609ef167,
-	0x7811de38, 0xc9038e0d, 0x8681c654, 0xbcf9f2c6, 0xe26ab36d, 0x0eff1842,
-	0x79f9ff15, 0x1ba3d72c, 0x2a3c5bc3, 0x7c03c3ca, 0xdb25de3d, 0x2b7c60a3,
-	0x0736bf25, 0xc5775fe3, 0x2da5b8f2, 0xeb889dcf, 0xa344e4f6, 0x3736e303,
-	0xea038f2b, 0xc05f7c9c, 0xd63823ad, 0x7ac27b37, 0xcd095c01, 0xa4231cee,
-	0x0d317153, 0xaac2edf8, 0xa0dd2196, 0x6b23211d, 0x9157b87f, 0x92686c8b,
-	0x4028f429, 0x6772861a, 0x454f728c, 0x559b0cba, 0xfa718d55, 0xffbe3294,
-	0x77715670, 0x9c9f01b5, 0xa43c2b7d, 0xe8225c3f, 0xc9d194cf, 0x36b3fa68,
-	0xacae081b, 0x819f3fcd, 0xf9b59f7c, 0xa012bd2e, 0x1ac79687, 0xdf67fe68,
-	0xe295d79a, 0x58989f16, 0xea7a10cf, 0x1e5f8287, 0x69d87410, 0x8b7fcd0c,
-	0xac6fbb45, 0x55405bcf, 0xe2f9f569, 0x5b3880d8, 0xd265f945, 0xed6393e7,
-	0xfaf3ce34, 0x80c903ba, 0x3167e7cf, 0xe68a0787, 0xf148dd6d, 0xbac69dd7,
-	0xe4efb8f1, 0xa431d0a9, 0x7f03fefb, 0x7e8c9038, 0x60fb2ce4, 0xbfda23f4,
-	0x4ad2f43f, 0x0e7e7f2c, 0x4ff88c1b, 0x60ad3ef2, 0x619fe63c, 0x7faf84b5,
-	0x65b1316e, 0xbf7db718, 0x210ffc6e, 0xc74cbebf, 0xcf04bf50, 0xe832461b,
-	0x19f53112, 0xfd382374, 0xba4a0f51, 0x91190303, 0x886e921e, 0xee90edbf,
-	0xc11af2df, 0x2a9ae12f, 0xb6f3dee2, 0x7c8f1f6e, 0x53665c92, 0xe1204e30,
-	0x793d91ba, 0xd9dbf631, 0x0ed0ef93, 0x221b12bf, 0x0ec21d2e, 0x610d88ef,
-	0x2fed8387, 0x637738b3, 0xe1d91bbb, 0x36ff82e1, 0x7fed06c6, 0x08597ee0,
-	0xed8d0dba, 0x1fdf0f10, 0xe3ff621b, 0xdef0f146, 0x43ff72b1, 0xc97f0f1b,
-	0xad6ff5c8, 0x293c3d8d, 0x1374bc84, 0xb5d6ebe3, 0xc67ed11a, 0xf5212835,
-	0x518b62d9, 0x1c7e1fee, 0x125fb01b, 0xe0438fac, 0xefb628f7, 0x17b7cdbb,
-	0xe9890d5b, 0x5bee8111, 0xdeb0ebbf, 0x29ce310d, 0x22fb3f81, 0xf6a6fb46,
-	0x0afa462a, 0x141e5ef2, 0x371429f4, 0x934f38b0, 0xbec1badd, 0x1cd69dd5,
-	0x3ee483f2, 0xd6ab54d5, 0x938b8c4f, 0x239f9ced, 0xd89d699c, 0x3c097f89,
-	0x70dbfcc1, 0x4c45b8dc, 0xf7231fb3, 0x3caae261, 0xcd0b318a, 0x6af8a311,
-	0x32f758d7, 0x1d6bb403, 0x209b1cc9, 0xcd685d1f, 0x9b6a7d41, 0xfdc468e3,
-	0x7917959a, 0x02e57e3c, 0xfd4e5de6, 0x7732f9f0, 0x17ca2f37, 0x2e302dd2,
-	0xe1c71110, 0x72e38888, 0x1cd27606, 0x8f0ae1c7, 0x9293b00b, 0x3e75ba1e,
-	0x1adae895, 0xd0054eda, 0x77df46d5, 0x50efd742, 0x3771ed2e, 0x8cf71fe7,
-	0x19be05bb, 0x7c737718, 0x4b4c14f3, 0x8f04dfec, 0x0ff38997, 0x2cf80f1e,
-	0xf826ee2b, 0xee2deaec, 0x50881e8f, 0xa5dc5dbe, 0xc4275e23, 0x6b77d085,
-	0x487d75f2, 0x4770b35f, 0x233abb28, 0x7dbff22e, 0xa086645e, 0x179d2df7,
-	0x2d27f179, 0xdcb3a446, 0x06f090f7, 0xe591139f, 0x264a0d15, 0xf6733fae,
-	0xc075a35d, 0xd37fc6a5, 0x79e3a03a, 0x42ee3e0f, 0x678003e4, 0xcea03aac,
-	0x7977f207, 0xea56919b, 0x22ffb32a, 0x4df6e31b, 0x53b5e606, 0xefb6337b,
-	0x7efb78c7, 0x633656db, 0xd31faadc, 0x547ac47b, 0xa8fdceb9, 0x7ee39468,
-	0x8d5b2a4d, 0xbebcadf9, 0x6197998a, 0x847a3a5c, 0xf003d98e, 0x670ce319,
-	0xc67c00f6, 0x7934d9e6, 0x2f9e4eb9, 0x25778dc6, 0x32efbe6b, 0x7da69bbd,
-	0xa69fbb92, 0x10ce653e, 0x6aad3e4d, 0x577da694, 0xf981cfb0, 0x9addcf0c,
-	0x266bddf6, 0x6b3df26b, 0x3fb4d01f, 0xcd9eaacd, 0x9c7a79c6, 0xce003dcd,
-	0xdece0259, 0xdf358beb, 0x0dd5d7f5, 0xf920a1f3, 0xffee1f14, 0x326c16cd,
-	0xfa73c44b, 0xfa69e77a, 0x5e6aff3d, 0x9df80293, 0x19386b5d, 0x7c219f18,
-	0xea4b7e00, 0x8c1cf615, 0x5b5eba5b, 0xe9e1a73f, 0xce902995, 0xe7cb6af5,
-	0x829cbee1, 0xdf2dadfc, 0x823d73ad, 0x71ed9deb, 0xe228ce22, 0x7f03ac3d,
-	0x97b8d244, 0x9778f037, 0xc41de9ea, 0xb13a5a1f, 0x762fc96f, 0x44a62fc1,
-	0xd984bf2d, 0x7a52fcb5, 0x1f30e770, 0x88ff88eb, 0xe47c413e, 0x78017f81,
-	0xf895f897, 0x7cb438b7, 0x9de15df5, 0xdb91af31, 0x3ff96d0d, 0xb5f1b4e2,
-	0xe3ee917e, 0xd4aeb7a8, 0xbf71522f, 0x7df1e58d, 0x57f52bfb, 0x6bb21d07,
-	0xdb3ad7f6, 0x17173a4f, 0xfb175718, 0x3f709749, 0x137636f1, 0xfefb89fb,
-	0xd900f885, 0x1f801b77, 0xb98708d8, 0xcc30ff7d, 0xac147fbf, 0x760a6537,
-	0xb238cbe3, 0xd77dfe27, 0x587af86a, 0x085c5ff4, 0x9387dcaf, 0xf9e472e7,
-	0xe7c91621, 0x3c01fb29, 0xf143f1a8, 0x022d9ffc, 0xf7dbadd7, 0x96f5a42f,
-	0xc4c43f3c, 0x7e10bfb9, 0x3aefe93f, 0xfc8935fc, 0x6e78f081, 0x6d3123cf,
-	0xf9c407f7, 0x3bcf692e, 0xb7ee47eb, 0x7b2a9675, 0x6c3fda55, 0x9b1dc255,
-	0x5e93d842, 0xfd72dff1, 0x1c43a675, 0xe07c57ba, 0x2bd1ebfa, 0x00aed007,
-	0xb962fbde, 0x5af602c5, 0x5febdbf1, 0xbf114444, 0xbd541eb6, 0xb2e0a1bd,
-	0x036d1ed9, 0x6984363c, 0xab4c88ed, 0xf403c9cc, 0x3daf58b1, 0x11f727e7,
-	0x6367db83, 0x27fd80fb, 0x8fe34ef8, 0xfdc21cac, 0x6e78ecb5, 0xe488bfdf,
-	0x9114c1fe, 0x175a0caf, 0xbf70d655, 0xe9f8236c, 0x4cfd010d, 0xfb50b789,
-	0x533911a5, 0xc08e29e2, 0x332bbbd7, 0x5627f214, 0x21f90a2a, 0x5347a267,
-	0x9cb8b5fd, 0x623fc4c9, 0xbbe8299c, 0x6edaffc1, 0x38bb1e1c, 0x37fb238f,
-	0xe6f6f3c7, 0x4e94d1f8, 0xb88ab789, 0xf21fb5b3, 0x93846547, 0xa1aa35fa,
-	0xc7a6a5f7, 0xb5ad79f3, 0x6a27e930, 0x84e3fee2, 0xbf38c4de, 0xf9a3fb89,
-	0x71fc1363, 0x7f66a67e, 0xf1138c68, 0x773e857d, 0x53ba9ea2, 0x78b3bdd0,
-	0x758fb3bf, 0x75276e3f, 0x12fbf78c, 0x1dfbc643, 0x0fde28e3, 0x5e71ea5f,
-	0xa47f71c1, 0x2fcd8443, 0xb7c48f3f, 0xd45483db, 0x7746f54f, 0x5abbae35,
-	0x0eff8377, 0x2dbc7dc5, 0xf0301fb4, 0xae077750, 0xb06656af, 0xb7e416bd,
-	0x7fa18c65, 0x5ba2df5f, 0x6bf5061e, 0xf58acc3c, 0x75f03723, 0xbb7ae95b,
-	0x8069a703, 0x8865b075, 0x8bac1f5f, 0xd7bc218f, 0xc46e4cb7, 0xf73581fd,
-	0xa19a1b32, 0x1b9b565a, 0x06d0fe85, 0xf8dd7216, 0x09b39094, 0xd4557b39,
-	0xdfe8f117, 0x53d3a087, 0x0fa04e82, 0x879d22d6, 0xf0afbab7, 0x4fae38fd,
-	0xfae22548, 0x1bcebf74, 0x373f3d6a, 0xf21d773a, 0xe86f40c1, 0x0b5ac3f5,
-	0x1175b7e7, 0xdda8e7ae, 0xb5ee7e2e, 0x59dfea54, 0xba07a63a, 0x9d74114f,
-	0xdf9f81b2, 0x5faed760, 0xc89fa557, 0x7a867fa8, 0x8b5ef4a5, 0xa543e317,
-	0x821e190d, 0x7a38a5cb, 0x7868bea2, 0xd2f985df, 0xc62b2cac, 0x657f9c23,
-	0xe43ea9ca, 0xbfae3262, 0xd494ecf4, 0xe3c76427, 0xb269df68, 0x16b5b7e0,
-	0x0d473f3b, 0xfc008e28, 0xb6586e97, 0x7cefcf17, 0xfb466bf4, 0xd6d4474b,
-	0x54d9d861, 0x2192ce40, 0x2159ea98, 0xfef82bc5, 0x1fa2bdd5, 0x5c61bfcf,
-	0xa9dc7fb3, 0x3e69070d, 0x63cc0c47, 0xb4ba3e06, 0xfa3b3ee7, 0xcde32bdb,
-	0xfb93c714, 0xf75547b2, 0xf48464e3, 0xda0815ad, 0x56110dfd, 0x43fc7f8c,
-	0x82465df0, 0xc7d21f7b, 0x057c7cbd, 0x6596c1da, 0xa3c474a6, 0x1a92797b,
-	0xd7ba7007, 0xd1ef342a, 0x788c93cb, 0x8ae6617e, 0x4f50e3c1, 0x95ce610d,
-	0x2879df18, 0xd3948596, 0x9d7cf1f3, 0x60655c58, 0x849a68c6, 0x172fe311,
-	0xbf8a146b, 0x015bfee0, 0x988e67d0, 0xf7aaf95f, 0xec3f88a3, 0x1e186ff0,
-	0x733fe5cb, 0x1e494aaa, 0xe46bcec1, 0x19d58ca7, 0x799fa093, 0xdb39606b,
-	0xf1fdec8d, 0xc043fe0e, 0x3af2ef79, 0x5b257d6d, 0x7f9d39f3, 0x5befe061,
-	0xeb682ed0, 0xe8f2953f, 0xaba40e60, 0x8cc5b17b, 0x0b4684e7, 0x51ad14bc,
-	0x665fa8ac, 0xbf8c68ae, 0x9b33f20f, 0xb4f20754, 0xe8eb0bc4, 0x8f39d3ef,
-	0x693d4dcb, 0x6ed9703d, 0xdced82ef, 0x2bff5c51, 0x2c70f77a, 0x3dd6287f,
-	0xadf1d71c, 0x9e18589f, 0x06d6399b, 0x1ec618fe, 0xc5106ccd, 0xd06cac1f,
-	0x5a3b00a4, 0x6026b064, 0x16c3dfbc, 0xb7be3226, 0x779c0e65, 0xf90d79a5,
-	0x07e89581, 0x1f91f9f2, 0x672c50f8, 0x15d7d6d5, 0xeac39f3a, 0x9a07e40d,
-	0xd6781f85, 0xae009b5e, 0x6e3d7317, 0xde2d3920, 0x687e4316, 0x235c8af1,
-	0xaef16ff2, 0xe043d218, 0x63d87e07, 0xc78e9f98, 0x481e6456, 0xeb8b7e84,
-	0x96aa1c32, 0xb8ff5a7e, 0x5ba498e6, 0x4b4fbf47, 0xe8a193b7, 0x94d2f406,
-	0xff0824a7, 0x3d8bd04e, 0x477e4b16, 0x7ab782e1, 0xcb9e019a, 0xee746155,
-	0x83ff33a8, 0xbed1c6a5, 0xe6175c9e, 0xdfafb725, 0xcafcdf68, 0xb744a19a,
-	0xfde57a60, 0xb470e667, 0x16afec27, 0xa1ec7a86, 0xc9e1ecee, 0xc2b0fe50,
-	0xeaa1ebe5, 0xa72879f1, 0x6f5c0959, 0x6614b7be, 0xfdec6468, 0xece666a5,
-	0x4b07d8c5, 0x68ff94ad, 0x3fe52269, 0xf4a76a5e, 0x287da593, 0x68e2293d,
-	0x0180ce52, 0x25475f88, 0x951af970, 0x6cdee220, 0x8caa2251, 0x307cffbc,
-	0xa1c56754, 0x4d8c27d2, 0x271eec63, 0xdfc02320, 0x046f7e99, 0xdf3db912,
-	0x4b8eb062, 0x9571ff44, 0xd8befa42, 0x3da6bb75, 0x3c4625f8, 0x64facdff,
-	0x9ce9cbfa, 0x1938dd98, 0xfcfef0f8, 0x69fb4d58, 0xfc9a2935, 0xcd3b04e4,
-	0x775e527b, 0x8503f94d, 0xa2f935fd, 0x9e024036, 0xf8db302f, 0xb7d8aafe,
-	0xd7c6cc67, 0xf6de56eb, 0x2ef0d56a, 0xaf7807df, 0x7d50321e, 0x5d243d30,
-	0x31d7ad67, 0x73368037, 0xfa0dcc3d, 0x933b593d, 0x11fceae4, 0x95fdd90b,
-	0x1ddf32db, 0xdb63f901, 0x7ebfb40c, 0x5aec456c, 0xb63e3fdc, 0x418a3e2d,
-	0x32a95eea, 0x7ac1fa1f, 0xe80591ab, 0xcb15dcb7, 0x9156fce8, 0xf940e4d7,
-	0xf9efda2f, 0xd1dbcc95, 0x5120441f, 0xbd543e3e, 0xe7e8853e, 0x14befc24,
-	0xf902dde6, 0xf1afa033, 0x16ccf8c8, 0x8519d70e, 0xd9fcc0ad, 0xfaf5bfb0,
-	0xb171c03e, 0x8744b6a0, 0x50f501eb, 0x1dcbe93c, 0x2dbe432a, 0xfda0605c,
-	0xa91fb9bb, 0x94cf311b, 0xde9c2921, 0x64479d2a, 0x7fa8992f, 0x021c0ad6,
-	0xd6fd16ed, 0x77d689b4, 0x0f77e44c, 0xfc16aef4, 0x26747c89, 0x08633986,
-	0x3de08558, 0x46fc7ef7, 0xd3e3f7ac, 0xfde7083b, 0x32b5dea5, 0x5cebf801,
-	0xe9107789, 0x49e2c7b5, 0x7ef182ae, 0x96f5c8d2, 0xf140e507, 0x9cbf4beb,
-	0x9d3e272d, 0x38247069, 0x25655f48, 0xb93abea1, 0x98e740c6, 0x3519de99,
-	0x3b3fd689, 0x38e58f88, 0x71f6f527, 0x9ac9df08, 0x96fb860c, 0xf2546bc5,
-	0x78ff9007, 0xffe72f7b, 0x1b3755a7, 0x28d6fd0e, 0x23a5d66e, 0x60b23cdf,
-	0x9a639d38, 0xc141d621, 0x9033e07a, 0x7f2f7755, 0x7e1ede7e, 0xb56586ce,
-	0x181defe8, 0x7c158f38, 0xbfde44bc, 0xd650073c, 0xd1474fed, 0xd4dcbee5,
-	0xf0ed1a3d, 0xe2550fd9, 0x6addb3b3, 0x3d022587, 0x0ef6e82f, 0xcfe43efb,
-	0xe94e7817, 0xb854ff21, 0xae02677b, 0xd26b7457, 0x3e786e95, 0xdbdac4f6,
-	0xaf73bbe1, 0xe6241c18, 0x7f49e24b, 0x6e697bcc, 0x8ef3c0d7, 0x2f97f51d,
-	0x38bfef99, 0xe7c01493, 0x38dd7b7c, 0x775c00eb, 0xe21d84bb, 0xe6e3b1f8,
-	0xbac5e02a, 0xc343c14e, 0xcb50c4ec, 0x3d773c6a, 0x3024c413, 0xec42784e,
-	0x7a101f8f, 0x1109fa45, 0xa67e785d, 0x7b37f38e, 0x0dbf2155, 0xbffa347e,
-	0x944f9c52, 0xebea5f7a, 0xfb4b5632, 0xf81247c1, 0x8ab9c639, 0xe055da97,
-	0xa8a82ece, 0x420f2b12, 0x79356d97, 0x97d419bd, 0x480fd035, 0xfbe762ee,
-	0x9e57c643, 0x652db645, 0x417e7ccd, 0xbc19ceed, 0x1d19cd25, 0x75894ded,
-	0xf51b0ae3, 0xfc60706f, 0x69c854a4, 0xf5e2ad79, 0xdd9079f1, 0xd98af194,
-	0xdb066ec2, 0x28f60ea7, 0x0ecd0ec8, 0x56acb3b2, 0xde01576b, 0xc2471c48,
-	0x2ba70c1b, 0x987842c2, 0xbda17007, 0x0f7b712d, 0x15b8244c, 0x03b25007,
-	0x35cca53c, 0x01e70626, 0x477b3ef5, 0xd5e782f8, 0xcf315e01, 0x1c4bb860,
-	0xff70fb9f, 0x5187cf18, 0x1e6829bc, 0xfec11e92, 0x894ba49a, 0xa4b7e387,
-	0x7e7a2141, 0x3207eeda, 0x7e491b8a, 0x9d500581, 0x44d77bf6, 0xeba567d4,
-	0xf866ff40, 0xd3f247f9, 0x8517563c, 0x7cc152fc, 0xbe50932b, 0x46d3757c,
-	0xe1bedfa2, 0x49ca237d, 0x53d7cda1, 0x5c288317, 0xb4bcd3fb, 0x1044f580,
-	0xd7446f9e, 0x9c378a6f, 0xbdc65e95, 0x37b34f00, 0x41b0ceab, 0x1ce2769a,
-	0x60e48791, 0xc463c78e, 0xb11cc6f8, 0x9c11bfee, 0x6e7e7a95, 0x76f086fc,
-	0x5b7d27e2, 0x68baf3b8, 0x9fbf62fd, 0x943a33d5, 0xaff76a9e, 0xdffaec82,
-	0x217e3c0c, 0xbd55f1f5, 0x5025e293, 0x2aaefc2e, 0x079b8f2b, 0x2cb4f1e9,
-	0xc225e3d2, 0x4e71cbae, 0xf149dfad, 0xf768d9b7, 0x5d3fca03, 0xfee293b7,
-	0x476657c6, 0x6a7dffa1, 0x78b5ccfd, 0xb6d4ebbe, 0x4be76499, 0xde76939f,
-	0x1ff40c6d, 0xbd17d772, 0xdfe463f8, 0x9f1461ad, 0x16efd92f, 0xabd01eeb,
-	0x9ebeced0, 0x8eb651eb, 0xb452d5eb, 0x1ec80387, 0x8b76c6f6, 0x51bddc4b,
-	0xc9ca020e, 0xe99e2e4e, 0xe81eddfe, 0x11cbf177, 0xc2a10f0e, 0xdf91d3ea,
-	0x3da1f56e, 0xf1f85f2c, 0x0ee73c51, 0x1fa3fff6, 0xd90ffb48, 0x92f77a8d,
-	0xc26f282e, 0x1bab97ee, 0x27e8add3, 0x5ff13b08, 0x3439bfc0, 0xfe1087fe,
-	0x01ff118b, 0x6bc720fb, 0x06679e38, 0x1ac4ffe1, 0xdb95974e, 0xfae147ba,
-	0x774d78f1, 0x6f8eb3f2, 0x9ff849eb, 0xcff01ab5, 0x3f5a5fe3, 0x8ff006ab,
-	0x3fc408eb, 0xdfbc5bc0, 0xe0eff02e, 0x78e1aff8, 0x3a786b67, 0x3d9e03ab,
-	0xf1618e74, 0xf40e4daf, 0xf984ce1b, 0xb33a9fc8, 0x01d5655d, 0x83f4987e,
-	0xbfb560be, 0xe24d7f42, 0xe6af6e7f, 0x0a7fa841, 0x1453fe9f, 0x76ee61d2,
-	0x80efa41e, 0x82ece67f, 0xfc7fb8fe, 0x95e9bf76, 0x7e01f12e, 0xa9d24dd3,
-	0xd918b982, 0x1d3f86c5, 0xe28375c1, 0x786d4f84, 0xd7dc468f, 0xd7ded7a8,
-	0x851933c0, 0x382f8c36, 0x278466cc, 0x8a1ef835, 0xf91c619b, 0x9f3f3d9f,
-	0xbce490b1, 0x6dbe7355, 0xba19f322, 0xa758ffa0, 0xf2c6fdd0, 0x39513945,
-	0x55d4e30c, 0x2ee9c704, 0x78fce68a, 0xff23aab9, 0xfdc8ccb1, 0xf93fb948,
-	0xde0ff0ae, 0x25d7c2ed, 0xd2b175ef, 0x18c29777, 0x164b81d9, 0x23ef17a3,
-	0x112a7ac0, 0x31ecf7c7, 0x228edd11, 0xd57f804c, 0x6036e228, 0x1f4f9102,
-	0x1f4f9c64, 0x38a26c8c, 0x5e54ac39, 0xd0f8bb40, 0xfc839312, 0x8a68b8da,
-	0xf4203ed7, 0x2b9183dd, 0x1e1f685d, 0x313a348a, 0x783d7e85, 0x1a30ce88,
-	0x0df18786, 0xafba46c9, 0x796e6853, 0x0fbe9705, 0xd4789e27, 0x06dea00c,
-	0x55c637ee, 0xd75dd7e0, 0xc5d23b63, 0x9c6d1f4f, 0x743c32a7, 0xe055a3dc,
-	0x293a714b, 0xbe82639e, 0x2b8e01c3, 0xdcb12f68, 0x9df1e56e, 0x8b27400d,
-	0xe5c1be9f, 0x03f7c3cc, 0xe35cf0ca, 0x6419c628, 0x935fe104, 0xfaf2332f,
-	0x26afc4f0, 0xec66cbac, 0x103ecccf, 0x3a8656e9, 0x45f7d704, 0x978c5ed1,
-	0x25f183df, 0xe27aa61b, 0xe67ac997, 0x26b4f1d1, 0x89cccf12, 0x8144d378,
-	0x9823a9cf, 0xeef01a2f, 0x778da83b, 0xf9d3e7dd, 0xef7e037a, 0x911afbd1,
-	0xbb66753f, 0xb8e30ac1, 0xb82194f2, 0x7e5b292e, 0x25a6f073, 0xa5d7f39a,
-	0xcfc75e42, 0x80feb585, 0x041e21c7, 0xcdbc4561, 0xeafdb3d0, 0x8807ce10,
-	0xdd9b4a97, 0x2816ed43, 0x71950f14, 0xc1ff4936, 0x1d207dd0, 0x41f0141f,
-	0xf851353f, 0xbd3431bd, 0xf5ca26fa, 0xabad1d73, 0x9bb90be7, 0x9b6de52f,
-	0x27c6de56, 0x82bda9da, 0xede0307e, 0x26769141, 0xff44e317, 0x5cb912e3,
-	0x78e2dd64, 0x9d35b22c, 0x7908b7ce, 0xfef13729, 0x88f7f8e5, 0x8da24c74,
-	0x00f095fa, 0x7ec71ebf, 0x9001a074, 0x56d64f5f, 0x87347f93, 0x33b5c405,
-	0x5f24edfc, 0xebb7cc77, 0x4c75dd11, 0x10b3ad8d, 0xc2f7caf5, 0x1f47a81c,
-	0xacf5d634, 0x4ed8ec8a, 0xb214dbee, 0x3d230366, 0xc261e229, 0x23558cfe,
-	0xa1407ce9, 0x5e0fefc2, 0x7478b1ca, 0x31a718d1, 0x630b6910, 0xf13f3a14,
-	0xf27fb137, 0x89e2f450, 0x5185d728, 0x33a63d46, 0xfbf52b58, 0xe8b76b77,
-	0x33de18fb, 0x0e763156, 0x77c88f03, 0xa8d5b8c2, 0x8d7e7877, 0x4aa29b33,
-	0x21c77f22, 0xdee1e027, 0xca7f406b, 0x09df2f7f, 0x4b7a5ffd, 0xe93bb3d4,
-	0x0b8f4bfb, 0xf2e4f63e, 0x7d65cffc, 0x92afcf1e, 0xff3cf9f5, 0xe45feca4,
-	0x5faa0e9f, 0x4bff5416, 0x3ebc5f9e, 0x7e83df3f, 0xd2ce68eb, 0xd214a385,
-	0xbe847b53, 0x23ee5c28, 0xf6ea16fc, 0xf33474f2, 0xdc6eb2e9, 0x6ba2536e,
-	0xd51fda0f, 0xf682d272, 0x2764d5f7, 0x704f9fe5, 0x75c44b2f, 0x63c524d4,
-	0xa1fb7d44, 0xc4c1ec97, 0xed1fce4e, 0xf8e3c2e9, 0xbfa0929b, 0x05fb7ea1,
-	0x8c4eacfd, 0x1c7ef5bf, 0x80ae1c49, 0x26f99e7e, 0x23a7fcf0, 0x49be1b3c,
-	0xb592b33f, 0x487f48fd, 0x86be7549, 0xe32763f3, 0xe645e734, 0x8d11c4ff,
-	0xe78627f1, 0xf3f50045, 0x67a5d797, 0x5ff3ff42, 0x04bd3d7d, 0xe76125fd,
-	0xcc74da2b, 0xdb34f789, 0x1be7a518, 0x7de2313f, 0x8d5d8ab3, 0xaed071c6,
-	0x00dcd212, 0x9c04cab8, 0x93f4e760, 0x8373ec03, 0x3d8c1bd0, 0x5f37f7cd,
-	0x7a47ab3d, 0x9dd5d7ce, 0xf6ed0e7a, 0x3ee42528, 0xddf166cd, 0x17ce4ed1,
-	0xe87a15ef, 0x11b39a6a, 0x8c6bf9e7, 0xb73e4021, 0x60fb93ba, 0x855f1c49,
-	0x1ccdeec2, 0x01db3166, 0xe43f43cf, 0x1b2554fb, 0x3c608632, 0xd184cdf8,
-	0x6d7e24ef, 0xc795b53c, 0x3c781b53, 0xbcd6d0b5, 0x33379408, 0x31ad9526,
-	0x84d8c1df, 0x0339485f, 0xf36f8591, 0x9d5f324c, 0xc79b263f, 0x767f30bb,
-	0x506b63fd, 0xb9c29a6e, 0xf0d0fb1f, 0x17a8e181, 0x7422325a, 0x37e79056,
-	0x498c8be3, 0x8efcb143, 0x639e5871, 0x222af4b2, 0x8be232fc, 0xc75de337,
-	0x3db05f90, 0x46dc41c6, 0x307dfc5f, 0x2adbf70f, 0x0f75a79d, 0xda87708a,
-	0xc087fa77, 0x4ac931ab, 0x19901369, 0x870917fd, 0xf9fc1f1c, 0xdfd0cd45,
-	0x8349e5c9, 0x9f71db57, 0x3490c725, 0x467e3fd4, 0xe072fb82, 0xac7527f8,
-	0x6e292e17, 0x024b8e16, 0x5dee030e, 0xd95dbe03, 0xac06732a, 0x898f26f3,
-	0xcdefe4d0, 0xc0ce658f, 0x29bded38, 0xc2f4fc9a, 0x0ff69aee, 0xa9afeacc,
-	0x6735302f, 0xb1f80555, 0x1e49fb9d, 0x62d2a782, 0xee7f4709, 0xfc5f0def,
-	0xfff441e5, 0xf40eab36, 0xd9eee755, 0xa1db97f2, 0x4e3c65d5, 0x3b47f145,
-	0xc9cecbc5, 0xa77a28f3, 0xe85f703e, 0xf3a66b22, 0x03ed9d3e, 0x7cee75c9,
-	0x773a7eeb, 0x03ef5df6, 0xeb124af5, 0x086c21dd, 0x55cbc3da, 0xaebc511f,
-	0xefcf9222, 0x8cc7ebe2, 0xfb8a0fb8, 0xdf81d78a, 0xd10fc2ef, 0x50f36c3f,
-	0xfeb73b3c, 0x1d9bed18, 0xba7ae448, 0x1e817522, 0x42551def, 0x1c68768a,
-	0xe068abe8, 0x3646e697, 0xbbee1770, 0x1fb85866, 0xb19936de, 0x1e2be458,
-	0x884a69df, 0xf3d77ba1, 0xbca8f26b, 0xfa9c2da2, 0x1e6d4f7f, 0x5f09e747,
-	0xa1ff6853, 0xe5a1e520, 0x29b87e78, 0x11e033dc, 0x77e0b718, 0xde21e577,
-	0xf3f1762a, 0x9fea05b5, 0x5a4016b3, 0xdf479b56, 0x49aca817, 0x42617f01,
-	0x05bfb72e, 0xaf21f368, 0x46acb30e, 0x7d1aabbb, 0x3d479ebd, 0x9e90b463,
-	0x807b6e89, 0x336cafc6, 0x24f7f7d3, 0xd0d77f71, 0xdb1ae1c2, 0xc972a2e6,
-	0xba93530f, 0x860fd669, 0x7c7acdf8, 0xc2d0c397, 0x6dddfda8, 0xf39528fd,
-	0xafcfbb7d, 0x21ae3ee9, 0x14b8eafe, 0x71dbf798, 0x90dc958a, 0xa57c3d20,
-	0x0b34786a, 0xc7daa7a1, 0xf4e7e369, 0xdcfc6d4c, 0x738a615e, 0x31c0127e,
-	0x3d16b1f1, 0x48b107ee, 0x35f115b3, 0x7b60c471, 0xa97c8049, 0x2237ef7b,
-	0xdeeb0c7d, 0x369da237, 0x501b9a41, 0x33ce2e5f, 0x05e9eb04, 0x2f4f5249,
-	0x1dda54a3, 0xf9067576, 0x82ac33a9, 0xccfc8501, 0x7e54fa10, 0x1a6b4cdf,
-	0x1e6ee3a0, 0xc5347fc7, 0x45f502bd, 0xbe9b0e73, 0x7366f483, 0x7cc3ee3a,
-	0x9d03f057, 0x89f90acd, 0x751e742d, 0x0ebb08e2, 0x04abffe3, 0x6f8e525c,
-	0xa2c58f34, 0x5b2a7bfd, 0x77befd82, 0x4ecd9de7, 0x47f1afe8, 0x0f689999,
-	0x25cfb8e4, 0xcc297bf1, 0xd70d7ada, 0x446f9583, 0x0bde51d8, 0xfb863170,
-	0xb44c7b9d, 0xda72814e, 0xc37ca8cf, 0x89ef09b4, 0x7ac14654, 0x7dcfc615,
-	0x7c87cc33, 0x9866f8dc, 0xef46ed1e, 0x4873f774, 0x7b37dccf, 0xa1f5c18f,
-	0x67a4c1b3, 0x9f38f7e4, 0x09db3d27, 0x5bd237bc, 0xe5267cc1, 0xe5c35dd3,
-	0x69f048a5, 0xb73f90b1, 0x552ba390, 0xaf0e485d, 0xe340063c, 0xca63e93e,
-	0x27e85dc0, 0x7ef42dd8, 0x02cb9493, 0x79410f5c, 0x3a18ff41, 0x8dfd2bff,
-	0x6b2c3960, 0xe5bf52b3, 0xef21766d, 0xb94bca36, 0x6372162b, 0x2cc67e12,
-	0x53bbe7c1, 0x5e20efdc, 0xee41aa0a, 0x3f1f68a3, 0xcfc9e50b, 0xf22b4637,
-	0x624df017, 0x54fc8049, 0xd0cfde37, 0xb9c5313f, 0x41666f88, 0xcc9fe81a,
-	0xac4ff76e, 0xfe0012e3, 0x74322b89, 0x9da9df78, 0xe6f9db7f, 0x8f7ff8e6,
-	0x48e29790, 0x67f44f5f, 0x0e61550d, 0x397e873c, 0x2cf7ef8e, 0xb8f1c55c,
-	0x45cae0d0, 0x2fe162ff, 0xa1978a15, 0x697a81df, 0x632a91d8, 0xfee51c60,
-	0x0ecc41b6, 0xd6d29878, 0x1337d283, 0x0f1147dc, 0x04d36d45, 0xa37d06be,
-	0x4ea1c5fd, 0x7832471e, 0x198d8e4d, 0xab724718, 0x6933e748, 0xe04cfacc,
-	0x1d7ade7e, 0xbee4c3c5, 0x992b8ca3, 0x807cbcf0, 0x5f42fd1d, 0x37ef4e9b,
-	0x7299c704, 0xb0bfddb8, 0xbf7640d9, 0xc3cff1ac, 0x2e7f5074, 0xed05d9c3,
-	0x777a97c9, 0xbcf5f21b, 0x0d57dec9, 0xe4ff9f90, 0x7691a8ce, 0xf4eb3e3f,
-	0x47689ebe, 0x188f00eb, 0xa35baaef, 0xbfb979e6, 0xc9f7c113, 0x7e4b7f38,
-	0x79f3e60e, 0x9f88dd6d, 0xc89954ae, 0xbe015d0e, 0x48760165, 0xe7a91dda,
-	0x7c91fda5, 0xfae7ae5d, 0xda323cab, 0xb408c9eb, 0x395c933b, 0xf87d77c8,
-	0xddbf1a79, 0x1476b4d9, 0x38a5c1ca, 0xed28b73a, 0xbc1cb046, 0xd31c14b6,
-	0x8eed1d5e, 0xcf52ebd4, 0xfa35bb4b, 0xfe772fe5, 0x8a55cd15, 0xe032407b,
-	0xb73d6eeb, 0x2deb775f, 0xe3633fc4, 0x6f91e926, 0x1e8f5e6e, 0x98f47a13,
-	0x74568f46, 0x27060762, 0x741c9adf, 0x4cf3ed15, 0x3d447fdc, 0xa3dfd81f,
-	0xe0c7a329, 0x7327c63c, 0xc15dfb3b, 0x1ffe99dd, 0xfa6b7c9f, 0x88b2587f,
-	0xff40ddf7, 0xfd732617, 0x99efac1f, 0x73a7bf95, 0x2f5f4f69, 0x0ca383da,
-	0xc1da03ec, 0x16fb0886, 0x5ec80f61, 0xbf7b4784, 0x4d5c1ece, 0x7888599b,
-	0x1e0f610a, 0xf616fe4a, 0x94a1f240, 0x5227291b, 0x48e5822e, 0x9f84c5ca,
-	0xe9113ac2, 0x57bf1ef4, 0x6cf7ae50, 0x7b46fda3, 0xcf9460c4, 0x976e3f76,
-	0xc1d6f242, 0xf1f9084e, 0x6ed68bcb, 0xf290b948, 0x5ca7e522, 0x20ecc5c8,
-	0xd6a7d8b9, 0xf70a333d, 0x6bdd92cb, 0x72fde393, 0xd823b652, 0x57ca743e,
-	0xb3645918, 0xf218aae3, 0x81a43955, 0x44ea657c, 0xbe499e1e, 0xd968bf35,
-	0x6fd3f24d, 0xf4fcfbfe, 0xe9f84e9b, 0x3f0dbe7f, 0x3f63f475, 0x3c03b2ce,
-	0xdf40b257, 0x6df9f866, 0xfb8c3bc2, 0x7af9dd0f, 0x0497d600, 0x8d319377,
-	0xae133ee2, 0x2f8a2ab3, 0x7494be0a, 0x6cc0fe96, 0x93387711, 0xe1077ae2,
-	0x82c0f5c5, 0x447bd39b, 0xb35c5367, 0xb327d711, 0x03f40d21, 0x9b7ff33a,
-	0xbdef516f, 0x3e749371, 0xfb9dfc96, 0x4392c78d, 0xb1c78dfb, 0xb5d29bfc,
-	0xf8899720, 0x300b8fde, 0x29e138de, 0x0acb6791, 0x46d38f10, 0x3c9ffac8,
-	0xfa81ece9, 0x38b8c981, 0x53de39c5, 0xf4b3de45, 0x3f6818f0, 0x8fe619e1,
-	0xd8fd439b, 0xb8f6e8ec, 0xedfcc288, 0x3b1fe795, 0x51e886bc, 0xddcce5cb,
-	0x3ffbe7a2, 0x79059f22, 0x447e404b, 0x6f037e50, 0x616fa51f, 0x9045e781,
-	0x9c21949f, 0xff00aece, 0x7fdf8601, 0x5585ed05, 0xa8d71861, 0xd6f8db8c,
-	0xf56bd415, 0xb545ed0a, 0x14d581e3, 0xfbc55338, 0x735f94b9, 0xc23e09d8,
-	0xbe78bb03, 0x93ed4a4f, 0x37e8bd1e, 0xa1bddce0, 0xb9d2714e, 0xb78a1183,
-	0x7c47465b, 0xdad149f7, 0x6bd1fc27, 0x1e7867bf, 0x6fbe56ef, 0x8dd6cfbf,
-	0x6e99f7be, 0xb2fbfc61, 0xfe7f9f43, 0xefe70a5e, 0x21d15931, 0xa8a5c7eb,
-	0x37111fbc, 0x68a1f1a0, 0x7be85d4a, 0xb8c513b0, 0x425fb8cd, 0x24f6dcf8,
-	0x28d9b7e2, 0x93f2fdf1, 0x196377c8, 0x60cfc4d3, 0x9fdfca7c, 0x8d4172f2,
-	0x19d74f9e, 0x9bafaf84, 0xa91480ef, 0xf2f8fdbf, 0xf4cbd104, 0x8476f835,
-	0xfb5db7c0, 0xe8ebefbd, 0xf7c3ac35, 0x48e76f82, 0xf86a763e, 0x22ef5a3d,
-	0x538e8cfe, 0x5747e8ac, 0xe0d6c2b8, 0x9f2fc17a, 0x6cbe27bf, 0x1d03fb96,
-	0x02b5efe4, 0x890abf94, 0x4febcf47, 0x74bafca2, 0x3cb9eded, 0x7335f3b6,
-	0x52bc01f6, 0x7fbe0fc8, 0x27faf9e4, 0x7c092e31, 0xd794f541, 0x2c1dc007,
-	0xf941758f, 0x15f920ec, 0x03fa47f2, 0xa9e001ed, 0xb8b7ea27, 0x007b4663,
-	0xd04cfc9f, 0x27b8a2e9, 0xfb9a3cda, 0x78ddcd93, 0xfb8523ba, 0x7c09cf8f,
-	0x9bed126e, 0x90f003c3, 0x1f1fe1aa, 0xe6025bae, 0x3fba784d, 0x93fbce4e,
-	0x63d07c82, 0xbf5e36cd, 0x27a3e52d, 0x7cfed93d, 0xa6af7f70, 0x7880527c,
-	0xf1fff7f1, 0xee23f461, 0x91db7817, 0x27b0e472, 0xc139d052, 0xf0214eff,
-	0x5163bd07, 0x74a1fc8e, 0x761f8fe4, 0xd04f4fe4, 0x774ef4f7, 0x3a7bdf67,
-	0xfa0cef7e, 0xea3de19e, 0xd05eff9b, 0xae883f2d, 0x1d744179, 0x942f9413,
-	0xff46af79, 0x5c5cbd4a, 0x09e3f4ff, 0x54df1871, 0x9fbf38e8, 0xbd934f9f,
-	0xfc956f99, 0xf230e67b, 0xcf9f9fab, 0xd7279e12, 0xce79ba09, 0x787a893d,
-	0x51e1ea12, 0xd414fcfe, 0x5f3f9443, 0x7e61fb80, 0xea81757b, 0xed91abef,
-	0x7afd922f, 0xefec8560, 0x3a4bca33, 0xb225cf32, 0xbd0bf777, 0xa4ad3cc3,
-	0xf035e7f7, 0xfe7d3fef, 0x2b5fc3f3, 0x7841b50f, 0xf79410d9, 0x775fb504,
-	0x22b6fb03, 0x82c7fbe8, 0xe504d7ea, 0x6be507d7, 0xcd17dfb4, 0x8b0e4852,
-	0xc9fdf046, 0xe60cb960, 0xda522f8f, 0xf6ed63e3, 0xff24895c, 0x1357234e,
-	0xfafe79aa, 0xa829fff3, 0xa7c80c89, 0xb21e89b0, 0xc05a30ef, 0xb9d041fd,
-	0xc1f8151e, 0xbcde89d0, 0xecde99d8, 0x79ef6c13, 0xd7f03ffd, 0xd22fda24,
-	0x54fb25f8, 0x9551be6d, 0xbbbd4770, 0x5f603228, 0xe2265995, 0xfdf3baba,
-	0x6389889b, 0x22fc0352, 0x6744f84f, 0xfb653cc0, 0x575d5f71, 0xd4f8bc71,
-	0x719b89f0, 0xd8b4687f, 0x14f1b4d7, 0xf68aa5ec, 0x6fc452ba, 0x5d39e1c6,
-	0xebee176c, 0x0fd030b9, 0x70bd7562, 0x523f8d9e, 0xd550bbf9, 0x53c01f40,
-	0x79d3b311, 0xea7899d3, 0x47d43bbe, 0x0df92f47, 0x47efb77c, 0xd3b412ea,
-	0xd2c49747, 0xa945a639, 0x17dcefdc, 0x366135dd, 0x1e231be4, 0xf8db7d26,
-	0xf74a58c4, 0xad95ceaa, 0x353ae856, 0x5f646279, 0x3c268fac, 0x4fc43639,
-	0x9dfc065c, 0x38276a99, 0x426b36dc, 0xabdbfa3d, 0x085fb40d, 0xfc457e2d,
-	0x3069a4f3, 0x968bb7ae, 0xb0fda7f5, 0x1a4f9fe2, 0x8ab0f787, 0x3ed0371f,
-	0x4ace8b49, 0xeaf72271, 0x6a2e74b1, 0x7a910ad6, 0xcdf4a2ee, 0x1abafcff,
-	0xbeb569ef, 0x0efbd0a0, 0x7bad5c77, 0x9b9e1067, 0xf74ee9ac, 0x7580de2e,
-	0x3efb9e00, 0x17b7bebe, 0x089f21cf, 0xa473a2ab, 0x8bee9ed0, 0xbfb35e95,
-	0xdb0b313b, 0xd0e5d6ab, 0xa39414fe, 0x956a7cff, 0x41ef09ba, 0xc2594515,
-	0xa9f6fcf1, 0x75c518af, 0xa26e3d4e, 0x478e2277, 0x8fac67ba, 0xe8b8fba3,
-	0x8a53b3e9, 0x3c014a3d, 0x67d0da4c, 0x96126262, 0xfb7d049b, 0x1e011544,
-	0xfced748a, 0x24a4f643, 0xa527e786, 0x05b899f6, 0x97ea71e6, 0xd87ce9bd,
-	0xe4e754c1, 0x2fd7c054, 0x52539cd2, 0x6e5e11e3, 0x0ffcdeb7, 0xe3fc8fdf,
-	0xe404e285, 0x395287af, 0x56d1bf5f, 0xbef8109c, 0x3d45c977, 0x469bc1f1,
-	0x277a22fb, 0xc14d3c30, 0x41f03675, 0x67cdc62c, 0xf00b7589, 0x219d92f3,
-	0xa9e1abfc, 0xf1abd12a, 0x48d9f1a7, 0x0f5f3f5f, 0x19f5177f, 0x5f2037ad,
-	0x2d7321b1, 0xa693b9da, 0x0f44ec25, 0x91fe7ed6, 0x3c230bed, 0x7985b619,
-	0x7e3032c3, 0xfc871cea, 0x7aeb12cd, 0xc804b64d, 0x77ff68a1, 0xfbe73f0f,
-	0xeb8f6877, 0xfe7bbfbe, 0x9fb812d7, 0x4697db21, 0x5ce83c59, 0xf458b69c,
-	0xfaa38f48, 0x3cf0a7a5, 0x060bc95a, 0x2f2503b2, 0x8ad63fc4, 0x06f807fa,
-	0xf3c16be3, 0x81aa63fa, 0x933a31c7, 0xad18cf4b, 0x1331b25c, 0xc99dbe71,
-	0xdc86cd65, 0x3b239b89, 0x2b52cb97, 0x5ee34fd7, 0x9651efe0, 0x71e8b50e,
-	0x0bf4737f, 0x7ba16d6f, 0x86c20b74, 0xd289bde0, 0xaf444c17, 0x63c58b16,
-	0x13ef0dbd, 0x9031f458, 0xedca9b3e, 0x9f90bd69, 0xcde9955c, 0x7ba52843,
-	0xf0df7212, 0x9e6792ec, 0xe797e3c5, 0x70da7798, 0x2765dfc0, 0xbbcbd3e7,
-	0x063f8a54, 0x1f9623ef, 0x61cc69dc, 0x788fb137, 0x32c3fd83, 0xdfde22d6,
-	0xf07dfd0d, 0xa9abe1fe, 0x0687fbc1, 0x2a5e4fba, 0x37730ff6, 0xe9770428,
-	0x3fcf7e12, 0x8dc79637, 0xfa052e4f, 0x1ede691b, 0x0f3c10eb, 0x294eedcd,
-	0xf866bc53, 0x0b0daef5, 0x13d98e28, 0x6e7184f1, 0x89e26ef1, 0xae3a4730,
-	0x085e4bf3, 0xfe96fc23, 0x7e5fee6a, 0xfaf78599, 0xd702e20a, 0x2f91fbd5,
-	0xde197e38, 0x9cfd941f, 0x7a63f65e, 0x45f731a7, 0x7cc31f58, 0xabd8634a,
-	0xbd2067f7, 0x9f71d292, 0x5d2bb653, 0xbc5ea3fe, 0x61afac1d, 0x4ab45d1d,
-	0xecc7efe5, 0x041d9136, 0x01644f59, 0xad672cf7, 0x72346838, 0x8712c63b,
-	0xeedaff09, 0x1c769fbf, 0x6eeaf1ea, 0x2687b8a5, 0x51ef27f1, 0xfbf8e915,
-	0x853a8574, 0x268157ee, 0x97497ba3, 0x7b5fb953, 0x679f953a, 0xd0774a28,
-	0xb5f29cfd, 0x0cf2c726, 0x7dfb4fde, 0x95df584f, 0x684b9aeb, 0x26f7f33f,
-	0xae54ab8a, 0x45867308, 0x3b17f3f1, 0x6af9d006, 0x51f011bd, 0xe2fae766,
-	0xa56f98b2, 0x745dd27d, 0x8ecf419f, 0xdcbea1e8, 0x7963f5c2, 0x923de00c,
-	0x186e8a33, 0xe8c767be, 0x9bf624dc, 0x7c602834, 0x3f439445, 0xbf7f28f6,
-	0x83563a4d, 0xdf6c1b71, 0x31e21077, 0x8474da76, 0xe49515ef, 0x76b49019,
-	0xaf7dfa04, 0xdeb899a8, 0x6fb55a2e, 0xf9dfea1c, 0x8de307db, 0xeaf45609,
-	0xe63f6407, 0x88b7fa0b, 0x90c56773, 0x22b677c7, 0xb93cb8d2, 0x8a2f1e55,
-	0xef345348, 0xf2fac910, 0xbf1e0655, 0x8a8f3d07, 0xc7d97ca5, 0xa5b96fd4,
-	0x6ff50139, 0x30c36ef9, 0x6951d3d4, 0x978b2e5c, 0x011f65a5, 0x44362abe,
-	0x6583bbd3, 0xe623029e, 0xca156acb, 0x4f8bbffb, 0xbf3d3e47, 0xe428b5e2,
-	0xbe61139f, 0x5a97689e, 0xe8398417, 0xc795a1de, 0xe8afceeb, 0x6695f749,
-	0xf82d9b59, 0x45acc19e, 0xbfa86ddd, 0x467d5a8f, 0x975a3fac, 0xd3bcc3a1,
-	0xbcc6cd6a, 0xe51b7f53, 0x2df38bcf, 0xa57c83f4, 0x6d973a70, 0xbfc467db,
-	0xcc44324f, 0x1f2be2f7, 0x4ff8c2f4, 0x2f737a79, 0x07c02bb4, 0xcf1052bd,
-	0x9764292f, 0xf3f1b62b, 0x2a0f92ee, 0xee400f90, 0xa83e09e6, 0xf7daf5d8,
-	0x902a1e51, 0xf23a43fe, 0x7ef3f011, 0x71b1df2a, 0xefdfe31c, 0x76913e47,
-	0x0c2bf20c, 0xf1df8c36, 0xa71a667c, 0xe18f943f, 0xfc019ee5, 0x39fb5d1c,
-	0x741c8d04, 0x1a575f46, 0xcbc587b7, 0x5d6fa44c, 0x5a1e5c69, 0x428eed56,
-	0x657c5dfa, 0x67dc01df, 0x5601df29, 0x1e421eda, 0x712a3e04, 0x3f0451fe,
-	0x389517f9, 0xfcff28df, 0xc85ef9db, 0xf3e32561, 0xd4adf393, 0x7acbf98b,
-	0xc124fdf1, 0xe04c652f, 0x2e6f576b, 0x50ce4277, 0x0ebde98e, 0x4db73f31,
-	0xf7e50efb, 0x22dcfcc5, 0x28bad665, 0x17d20fc4, 0x103e0ff5, 0x04fa9469,
-	0xbedc5c9a, 0x4bf1ce91, 0x57f8497a, 0xdf403809, 0x7e6c6339, 0xf274b63a,
-	0xe095644e, 0x778f639b, 0xfc07af49, 0xcf4adf9d, 0xeabf116c, 0x7c93c603,
-	0x7dcbc723, 0x38ddd279, 0x87dfe86f, 0x8f71cbfd, 0xd8f4227a, 0xe5c651cf,
-	0xe52fc243, 0xa1fab732, 0x614707bb, 0xee968bbb, 0x9cde7003, 0xacd2ab8e,
-	0xfd13bdf4, 0x59def805, 0xfadc50af, 0x1fe75898, 0xa8b5fc7b, 0x7e7e01e2,
-	0x277c427f, 0x307f0cf9, 0x6de1263e, 0x7038f1b2, 0x0f52dc30, 0x9f73b849,
-	0x2c6eefb8, 0xbee3f097, 0x4a9f2051, 0x957e4a3c, 0xf982f5f7, 0xda4e7896,
-	0xfe73b54f, 0x463d4cae, 0x943a77e7, 0xfc27f707, 0x5ce213a2, 0xe33c6b79,
-	0x8915ff71, 0x8af735fb, 0xb40c8b18, 0xc08ed23f, 0x807d1acf, 0xa7bf69fd,
-	0x8b3ce716, 0xd690bb74, 0xc73ffa8d, 0xd0398cea, 0xe699d96f, 0x9dcef871,
-	0xb8ef43f4, 0x31a353ea, 0x9f8bb55e, 0x52fc9377, 0xc93f6176, 0xffb8b941,
-	0x83eab454, 0xefc8e182, 0xbed035bf, 0x63e3d14e, 0xcfdfe88d, 0x187332dd,
-	0x41ef01a2, 0xbb3f5ea0, 0xbf266879, 0x984d6059, 0x3621f786, 0x01ed333f,
-	0xaf559f28, 0xd80dbbd2, 0xd16fca0f, 0x5f1499a3, 0x52d6113d, 0xf8fd0a30,
-	0xf456a81f, 0x32df6fe3, 0x7f6c31f4, 0x0c6ba5bb, 0x39b1b63d, 0x7d4ef296,
-	0xe907d934, 0x8073caf7, 0xc7dee2d5, 0x3fde845f, 0xe22a9edc, 0x2f755ffc,
-	0xdd6f8fdc, 0xacef4618, 0x75ed1a14, 0x4f6f1c3e, 0x54675a17, 0x23eaf11a,
-	0xbf255bdd, 0x99918e6c, 0xb9508693, 0x0fca0939, 0x451f9a1a, 0x51f0723b,
-	0x3f7c60cb, 0x86d7a992, 0x9a7f7315, 0x6ac63bef, 0x70912ddf, 0x0fc6247c,
-	0xdf7e4fee, 0x1b08eb84, 0xefa44fdd, 0xedf8aecf, 0x6783b434, 0xe1b4f6b7,
-	0x09ef4fbc, 0xa703fba3, 0xcf77da0d, 0x57def56e, 0x79297df0, 0x9a74f56f,
-	0xfc938fd6, 0x377bc37e, 0x839ed37f, 0xa5b9d1bc, 0xdd194b0b, 0x8d397efb,
-	0x2263f7d1, 0xe789dabe, 0x4d6a4b08, 0x7307bc56, 0xf71ef912, 0xfcab76b3,
-	0xcb99a5fe, 0x99ddc9c1, 0xe4b7bf74, 0x525f3c6f, 0x3ef178a7, 0x9fa7fef2,
-	0xb30af3a0, 0xabc4cfc1, 0xf3feed09, 0xa1a7a7ba, 0xb8765c38, 0xfe7de257,
-	0xf9f95bcb, 0x32ef0e8a, 0x2079dc1c, 0xdfb9dec9, 0xcbfb5dfc, 0x9f110e32,
-	0x2fcfbdae, 0x4fd72cf1, 0x8c3f026f, 0xdbc7e218, 0x90e74b67, 0xa9617cbf,
-	0xca4bd29b, 0x23b7b5b1, 0xe9a25b1f, 0xeb1fc0be, 0xbdf1519f, 0x835df2a8,
-	0x783ae1af, 0xbd346454, 0xd2d9f293, 0x7a8fb425, 0xa5156961, 0x0e32de92,
-	0x46aec777, 0xfab3eefa, 0x9fbc06cc, 0xb46446fb, 0x90b603b0, 0xdeeced74,
-	0xb9d79cb1, 0x4afa701f, 0x9d6dcfb8, 0x6af38519, 0x61b63e7c, 0x2235d224,
-	0x5f7e8ada, 0x724738a9, 0xabf73d6a, 0x7fa398cf, 0x3df40f93, 0x024a61b3,
-	0xbb3737be, 0x5869def1, 0xb147b25e, 0xb1c07ae2, 0xae145267, 0xb7d53edb,
-	0xa8fde144, 0x7bcbd74f, 0x3bfa5e55, 0xd8f2a354, 0xca3f6c14, 0x0cf667a7,
-	0x7c8d75be, 0x9e82f232, 0x879ebfee, 0x5c938a72, 0x0938a70b, 0xb9e2c4fc,
-	0xf3afd991, 0x3afb4af8, 0x6ef3ac57, 0x347ef317, 0x31f726dd, 0x04773ca8,
-	0x61bd3f2f, 0xefec44e7, 0x158366ec, 0xb36cfee1, 0x079ffa81, 0xc01d33eb,
-	0x5f2b667b, 0xd71e60f7, 0xf2b767cb, 0x3abccdf5, 0x5f29bebe, 0xfbf27060,
-	0xcc7e5aa2, 0xef47680d, 0x5ef274fb, 0x9f273cc8, 0x97b03cdf, 0xbe60df38,
-	0x7475618d, 0x9e9bec8f, 0xdbe60d17, 0x855f92f9, 0xd7e7687e, 0xe044f8ce,
-	0xf91de513, 0xbcc3f255, 0xdedf7cf5, 0x07383756, 0x47f24ef9, 0xd5593bf0,
-	0x57dfc646, 0x7bd385d4, 0xed2293b8, 0x530fb406, 0x20c65ae2, 0xe74e3e5a,
-	0xab9a807e, 0x37bde273, 0xf90a6d56, 0x748acece, 0x744557ee, 0xdeefc465,
-	0xcf3f2b74, 0xc97fee29, 0x86922614, 0x84527b76, 0x343b0bed, 0xaefd3a79,
-	0xcfc0f47b, 0x3db76e93, 0xd8c1ddda, 0xee0bd32f, 0x267cc3d1, 0x7776da65,
-	0xbff3fc83, 0xb7f3c09a, 0x201a86d9, 0x78994cbf, 0xd7c818cf, 0x4a9f3ba7,
-	0xece7180f, 0x38692e96, 0x19ff283f, 0xbbc5d796, 0xa5698e7f, 0x49760fb8,
-	0x24b41d69, 0xfdfedfc3, 0x7fa3963d, 0x2df3fbb4, 0x18ee9606, 0x7f097980,
-	0xdd25b4e8, 0xf8f4abf9, 0x8cc5e58e, 0xf5e74e3d, 0x0e1efc3c, 0x09ccb8fc,
-	0xf38a4f78, 0x97bcb15b, 0x2f741353, 0x9fefc1c7, 0xf252fbc9, 0xff5f543e,
-	0xb70db27d, 0x92ec9f72, 0x2a1dff81, 0x0fbda9c5, 0x89fc34a6, 0xf6a9f9de,
-	0xa23096b0, 0x4d9ef683, 0x7753be39, 0xa20bdd1b, 0x6f4c87fb, 0x57337d27,
-	0xac683bfa, 0x29dff987, 0xfcfc8960, 0x1f82a3c1, 0x3d652f4f, 0x9fe8807a,
-	0xca39b77f, 0x985c700e, 0xfa85ebe8, 0xfddc3220, 0xe9d7c427, 0x0ba9d50d,
-	0xaa1ef0e3, 0xed0f91c9, 0x7df978cf, 0xb7e132ce, 0x42f1cdb2, 0x3bbea82f,
-	0x46535da1, 0x87684ddf, 0x757c17de, 0xfe97c321, 0x192bd423, 0xed049d7c,
-	0xde5d3ce8, 0xb1e2bbf2, 0x4fed85dd, 0x700d98f4, 0xbc06009b, 0xfa1e35a7,
-	0xf7a3611c, 0xfb4a98aa, 0x7efe5ecf, 0xa2799e92, 0xd5eef86c, 0x3ee2e933,
-	0x9413dd11, 0xeff89274, 0x1a181740, 0x999d59fd, 0xbeee1019, 0xfdfd036c,
-	0xf91f492f, 0xddc2e2ce, 0x7742fe3c, 0xe31e4524, 0xe2cda748, 0xb0759fef,
-	0xbf916f8b, 0xd1e9620a, 0x330d9fe8, 0x11c9db43, 0xf5d88d1b, 0xff2f6d77,
-	0x92fc2e9d, 0xe0706cc1, 0xa2a5923b, 0xd0b558cd, 0x2d5bef8e, 0x7bd3378c,
-	0xe85f0b25, 0x96c1fc4e, 0xb60590fc, 0x89621b63, 0xa866565f, 0xf5b9ff84,
-	0x2a1dde8c, 0xf3a64fa8, 0x36f5f994, 0x12daa34a, 0x6fecfca9, 0x7ae2c9de,
-	0xe0a7d389, 0xa68cba7f, 0xd3ff4b73, 0xd9d6529b, 0x6691a77b, 0xf0bbcfba,
-	0x0b6bb720, 0xc7bfcaa7, 0xbbafefc2, 0xc8ae3804, 0xb90b8a1a, 0xe753dc3a,
-	0xf0ba57ef, 0xe77e00be, 0x677d5034, 0xfc4a57ef, 0x82dd049a, 0x7a9cb3df,
-	0xde913330, 0x59ef147f, 0x9aed174e, 0xceb3bdc5, 0x4fbcb5de, 0x6a227bb4,
-	0xddf2135c, 0xc8696774, 0x9ef52d77, 0xcffa0730, 0x7a48d486, 0x373ee147,
-	0xf59a97f8, 0xf11e8b4c, 0xbf9b2d30, 0xba753973, 0xfd90deb6, 0x4373e939,
-	0x92778776, 0x4d8fa80c, 0xecfb6d2e, 0xf50ec2ae, 0xf6bf7d65, 0x2354d15d,
-	0xbe3d4fd9, 0x69f90b3b, 0xf4515de2, 0xbfffd10f, 0xff10b4ec, 0xb83bc49b,
-	0x112b2ccd, 0xbeadc2f5, 0xdbfffb27, 0xefc1b1fb, 0x03bf06c4, 0x42eb7fdb,
-	0xdd607e4d, 0x6fed350f, 0xa9ae5fab, 0xad5bec1f, 0xfa6ccfa9, 0xb43f2699,
-	0xfb4d39f9, 0x693647e1, 0xbcb647ea, 0xfdbfa9a4, 0xfe4d0ecc, 0x683fd68e,
-	0xb6d9dfda, 0x61cf9357, 0xe7da68ef, 0xe4d03f9a, 0x57ff5ac7, 0xc4aefed3,
-	0xf1fa9a13, 0xfa9af3f6, 0x68ae7d09, 0x2f8e05f2, 0x373fed35, 0x457757ba,
-	0x0cea22bf, 0x433aadf1, 0xf944f861, 0x6629a6e5, 0xba6b07d4, 0xf8247d0a,
-	0xd3b0b96f, 0x7ba307ac, 0x6cd563ac, 0x3d5ff11f, 0xc1a0bbff, 0xde7f4f76,
-	0x1ff8c4e5, 0x6bdf8d7b, 0x527f068b, 0x8c7e301f, 0xff02ccd3, 0x9e6c5dee,
-	0x778f9355, 0x77da6a25, 0xd4d76e99, 0x68fbb927, 0x38e653ea, 0xaab4f934,
-	0x5df69a11, 0xf9353897, 0xa69e4f0c, 0x971af77d, 0x76b3df26, 0xef7da6ba,
-	0x7d4d6ef5, 0x4d1cef5f, 0x55adff7d, 0xbac0fc9a, 0xb7f69a25, 0xf5347bd5,
-	0x9a357d83, 0x5aa6ccfa, 0xf3687e4d, 0xe1fb4d7a, 0xfa9abc47, 0x355b2d91,
-	0xa99fb7f5, 0x68efe4d3, 0xbfb4d7ad, 0xc9a7cdb3, 0x9a83b0e7, 0xf7e6b9f6,
-	0xd6b1f935, 0xefed344f, 0xa9a63c4a, 0xab3f6f1f, 0xce7e97a9, 0x6b9f3e84,
-	0x53df85cb, 0xe697f8e0, 0x6ef7f6fb, 0x1f742877, 0x6ed75cea, 0x96c57df2,
-	0x24fd1530, 0x6c99c517, 0xf5111078, 0xb727de15, 0x8539f3f1, 0x238aaf14,
-	0x944c887f, 0x810bcf1d, 0xab8510df, 0xf40c8cb6, 0xfefc23ab, 0xccf5ea5b,
-	0xdadff79b, 0xd5dcff84, 0xf288beee, 0xfb6eaf31, 0x989f7a38, 0x1c225679,
-	0x77bffdf2, 0x956dde83, 0x19f378e9, 0x17f00fa6, 0xa6d5860f, 0x389af90e,
-	0x05f378c1, 0xb6c1ef86, 0x22e22bf7, 0x17bdc7f8, 0x16bff406, 0xf7f817d6,
-	0x9a976b23, 0xffc76fe9, 0xf295a96c, 0x522696eb, 0x3a00fffe, 0x0047bf29,
-	0x000047bf, 0x00088b1f, 0x00000000, 0x7dedff00, 0x4554780b, 0xeedd7096,
-	0x9d248fdb, 0x777579d0, 0x493cdc9e, 0xf09d0848, 0x3a3e00d8, 0xc0406021,
-	0x490435e6, 0x41a8c1a4, 0xf881ba43, 0xbb75744f, 0xb2021031, 0x10d191b3,
-	0x0186c195, 0x099d1964, 0x09d1a32e, 0xe09af09a, 0x1c604c3a, 0x3719d9c5,
-	0x8ee2a3a0, 0xcfe31e10, 0x7fc38fee, 0x937ba9ce, 0x380e9dbe, 0xf7ff3afe,
-	0xb4fbfa3f, 0xab755538, 0x739d554e, 0x2aaa3cea, 0x89895ead, 0xde6d6322,
-	0xf39f4a1c, 0xc99899da, 0x316f36d8, 0x0ebddbc1, 0x72defd82, 0x9d7a774a,
-	0x5bcbbf94, 0xaf1ef041, 0xdebdd28b, 0x79f74a1a, 0x92fe543d, 0x9fe081b7,
-	0xb6947d7a, 0xff299b7b, 0xc10b6f15, 0x046dbc07, 0x53f5eabf, 0x4bdde1da,
-	0x76de1be9, 0x76f4ef2a, 0xb7a6fc10, 0x6f2ee08b, 0xbc87c10f, 0xf11f04bd,
-	0x98f8269e, 0x1ed28fb7, 0xbe9467ef, 0xf2a7eded, 0x0957bc77, 0xdbbf8ebe,
-	0xcd2afc19, 0x2631e49f, 0x7ae69730, 0xc9ccc21e, 0x00f63226, 0xff824bfe,
-	0xcc8846e2, 0x8cfdd8c2, 0xb0d73eff, 0x9413769a, 0x3ff2fe77, 0x74c60285,
-	0x1f8d8ca5, 0xf662690f, 0xc634c6ce, 0xe675b026, 0xd318724f, 0x63d75740,
-	0x4e09fb07, 0xd6191319, 0x2d75dfc3, 0x58c7dffe, 0x94bffc3c, 0x834c78e5,
-	0x14095369, 0x55befb42, 0x1a777f82, 0x3e20d755, 0xbf1c8dab, 0x95135a69,
-	0xf82c3e57, 0x5563020d, 0x8be9f322, 0x587dfb18, 0xc11b0154, 0x2e8f25d8,
-	0x2172c447, 0x04830edc, 0x443a8ff8, 0x2c5d7e0e, 0x9da5b18e, 0xd29b1d86,
-	0x84aaf106, 0xfdf035ef, 0x0c1a562b, 0x3a3d64ab, 0x1df203c4, 0x9ec618da,
-	0x4ba6b8b7, 0x8a60ff90, 0xf687a7c6, 0xed9fc999, 0x2dec648c, 0xe6066b8b,
-	0x77dcf25f, 0xc07f1b0c, 0x7ec6cf6c, 0xe2ba1b66, 0xfdff4117, 0x9df6b5c7,
-	0xe1f3f0d2, 0x6c67296e, 0xdfca0ddc, 0x02ec973c, 0xa2ffca3c, 0x9ffce175,
-	0xf85645d0, 0x492f01f3, 0x1a4a78e0, 0xeadb3a55, 0x7cf8825a, 0x47b9e919,
-	0xe5f85303, 0xacf6ab6d, 0xae552181, 0x82e11aca, 0x2582eeef, 0xcd8c1963,
-	0x418e9265, 0x38e67cf9, 0x2d4d069a, 0x17822e64, 0x6fa51f31, 0xb1aabbc5,
-	0x4fccc59d, 0x21b26bb0, 0x82b8d435, 0x78cb72f1, 0x947c65b9, 0xabab71f4,
-	0x20e5e38e, 0xba4c4ebc, 0xa5c71b23, 0x5596f5e0, 0x58737aa2, 0xefc476ff,
-	0x3f1783cb, 0xd2863211, 0x174077c7, 0xeb1e6826, 0x73ac3d31, 0xf7d18ea3,
-	0x7e088f8d, 0x2e856ba4, 0xb791992a, 0x0be418fb, 0xf4027481, 0xd2fc8451,
-	0x92373a9f, 0x0949e4e8, 0x92707c1a, 0x0b1fa7d6, 0xb3f8d4e3, 0x87d12d05,
-	0x1efc005e, 0x48fa0388, 0xea0e9e1f, 0xe00d219a, 0x67afa01f, 0xaff3bdb0,
-	0xce0e5dff, 0x49cdfb97, 0xa357ce12, 0xe801d606, 0xd6b6f7d8, 0x99925bbe,
-	0x94ed6014, 0x6ba47e31, 0x73edda26, 0xb17ae0c7, 0xdfa84ea5, 0xfb0d65ad,
-	0xfbf687f3, 0xb417ae2a, 0x2ba6c27f, 0x9cbb53f7, 0x9ff295cf, 0x63c5fae2,
-	0x5eadebca, 0x16ad69f5, 0xe8713ff0, 0x131a5e9c, 0x6f0d1c62, 0xe00666e7,
-	0x3338eeef, 0xe44261dd, 0x45e7f2fa, 0x949fe60e, 0x1fa144e9, 0xb5d23ead,
-	0x178814c3, 0xf9e817ef, 0xd13744e7, 0x4419cf40, 0xe0f89fcf, 0x690639d3,
-	0xfb4822c4, 0x20ba6a60, 0xd660bd75, 0x672cdd23, 0x99ab4a76, 0x6007d293,
-	0x9d7e91f9, 0x38f4a7be, 0x76b20fef, 0xbe2bafca, 0x7cf482d7, 0x8a95c6bf,
-	0xa5eb2d70, 0x2feb377c, 0x2dfcc1b3, 0xd47b5e6c, 0x6fcf5806, 0x025a6a79,
-	0xff3cefcc, 0xce98a3b2, 0xe27c25dd, 0x7a3f8893, 0xc13eaf10, 0xfa113eb3,
-	0x92a5fbbf, 0x3f9049f5, 0x85d7cb47, 0x175f2bfd, 0x8f047e45, 0x97a1f81b,
-	0xe341cb8f, 0xab9546d2, 0x09f2a1f8, 0x9da010e6, 0xff0683fe, 0xfe00b4ce,
-	0xdfe87e28, 0x898e5093, 0x7ae0f7fd, 0xc434dfbb, 0x083f7ae0, 0x29c71be2,
-	0x806b1838, 0x2ad690fe, 0x882a8863, 0xe1621fde, 0xb9f7ac76, 0xa79fdf4c,
-	0xcfefa230, 0x4060e605, 0xa67417bf, 0x5ae50166, 0x0456cbaa, 0xbe60acf8,
-	0x6ee50626, 0x38054bcd, 0xd725234f, 0x1fd744a7, 0xa61537b5, 0xa7f7fca1,
-	0xf7ff280a, 0x698dec19, 0x5d84fdaa, 0xe321408f, 0x3f9f3861, 0x0ec776c0,
-	0x3e284bc5, 0x14429ff6, 0xf33d0663, 0xbf888b19, 0xebe444d9, 0x57f13d44,
-	0x066d4e23, 0x3c94e3f6, 0x9feda1a6, 0xf9edf190, 0xef744b4a, 0x16ecf183,
-	0xf7c3f542, 0x60f8432b, 0x2c3f243f, 0xa7d1fa8c, 0xfa563e71, 0x64bea663,
-	0x6a75d027, 0x86974b84, 0xc716c182, 0xcb998be5, 0x4fb49e97, 0xe67d7133,
-	0xc8a8de4c, 0xdd8f6a65, 0x09d1e5c6, 0xf843e49d, 0x1d9a4944, 0x9c80d724,
-	0x97f8abbd, 0xbb8f11a7, 0x2d2ea68c, 0xdd16eca4, 0x7d94fa9f, 0xff707d30,
-	0x7fd94bbd, 0xeffbe16f, 0xefb5991c, 0xf1babb12, 0x3aecc67b, 0xfd972fc4,
-	0x6d8f995e, 0xf22adfb8, 0x0b7ec871, 0xf9c5eb03, 0x832b2513, 0xc7c0b574,
-	0xdc253abf, 0x36c47c8f, 0xf4f8d2e7, 0xfe0cfcb2, 0x58c15ade, 0x13c651a6,
-	0x19704bfe, 0x20ce6659, 0x5663549c, 0x9b1e29c1, 0x06c8feaa, 0xe69e5549,
-	0x679551cb, 0x7055db34, 0xaab14b56, 0x8736a8fe, 0x97f5ce0a, 0xede7eaab,
-	0x31e0aa75, 0xfaaa15ed, 0xaa5c3b63, 0x1aaec2f2, 0x1eb8f955, 0xd09e0a8f,
-	0xffaaa0db, 0xaa7da777, 0xcd7d49f2, 0x9f29f2aa, 0x5be0a8b5, 0xf554dbfb,
-	0x57eabf6f, 0x7fb09795, 0x354f9556, 0xd3c157ee, 0xeaabafcc, 0x16fb80bf,
-	0xb61dcff0, 0x0cfe556e, 0xbbeab8e9, 0xaa4e733b, 0x75e417e0, 0x270e2df6,
-	0xe72d68be, 0xfb6cd1fb, 0x5876aa07, 0xfebe68e7, 0x7b6f3c61, 0x510b1fcf,
-	0xf4d76e4e, 0x4add21a7, 0xf222735a, 0xdcf16671, 0x2c664043, 0x14aab1db,
-	0xf94e5bc5, 0x1d308753, 0x8a5fdced, 0x715f926c, 0x05a610f2, 0xd0a58bae,
-	0x44d7b31c, 0xc8b4c61f, 0x8ad53853, 0x3dcc34a8, 0xdf44e98c, 0x5728a9aa,
-	0x3f5c785f, 0x2a28f91a, 0x074fa146, 0x827d67d1, 0x7eb9f886, 0xf28fc9b1,
-	0x24c532c7, 0x96139032, 0xb1d65a1f, 0x9a8b4c02, 0x1af66d31, 0xfa0f5f99,
-	0xba519780, 0xfe666bc9, 0xaf67206c, 0x93fae08d, 0x43a795f7, 0x44ab233b,
-	0xe699aa33, 0x48258f51, 0xe5f5bed0, 0x765d9c96, 0xb0edd6c6, 0x42e5d7cf,
-	0xc59e19ff, 0x4e01a23b, 0x30058e63, 0x2398167f, 0x25b19936, 0xfa76df3b,
-	0x97c287f2, 0x244d9d33, 0x5cf6c417, 0x7694ffd4, 0x6e7e9637, 0xdf2198d7,
-	0x11e74bf7, 0xf1adf798, 0xc21df4e1, 0xa75f9925, 0xb60b475d, 0xf69ef90b,
-	0x4cfc7c10, 0x977fdf1a, 0x0a7d73a4, 0x66eb8487, 0xacc6cbe5, 0x808ca7a0,
-	0xa93adcb9, 0xf0ea0ce1, 0xa027d9a2, 0xe0d7627c, 0x892b907b, 0xe0832958,
-	0x4e01c3db, 0x6c625840, 0xc7eb967f, 0xc5d5afd8, 0xfa00d9d8, 0xc351a849,
-	0xcf9e615b, 0xa3e20e66, 0x89f1aa5b, 0x8fdd0630, 0xf43b769d, 0xc60aadb3,
-	0x3d56f00b, 0x7a9437d7, 0xf68c34a3, 0xf8d32ff7, 0xcdaece7e, 0xf49ea3b7,
-	0xe79e3ca5, 0x3e8bfdbc, 0xeb7b44ce, 0x3589a52a, 0xf205c11e, 0xb4e95acd,
-	0xae9ea0fb, 0x8423e611, 0x348bf2de, 0x1dd7be91, 0xa090447e, 0x1269a7de,
-	0x7e9589c1, 0x0d52771a, 0xbf801bb4, 0x6609f44d, 0xe63db7c8, 0x9b3f1013,
-	0xf06769d9, 0x885a331d, 0x3cc8d7fe, 0xcbf86b61, 0x0f418fa2, 0x769d79d3,
-	0x13bba7ac, 0x271f33e8, 0xb86663d4, 0x47e3c94e, 0xa3eb10b0, 0x0d3e86a4,
-	0x9f40dc73, 0xd47d4a8f, 0xddc5fb43, 0xe80b2926, 0xa6c585fb, 0xda211d8a,
-	0x9f9e54fb, 0xfeea310d, 0x1f3e5a2d, 0x6cbedc8a, 0xf0a8ebe6, 0xa6689af1,
-	0x526be392, 0x846f5bc6, 0xc8cdb5af, 0x6ef8015c, 0xd0cc7e85, 0x55abe1be,
-	0xe83f1c66, 0x4fea4ed0, 0xc764f2e4, 0x6ec8728f, 0x21c75e0a, 0x3f9408f4,
-	0xa3e908a2, 0x7c08dfcf, 0xdbd2a868, 0xfeb26f51, 0x7b809343, 0x116b2273,
-	0x5358be50, 0xdc447aca, 0xae5744d7, 0x793e8433, 0xd654ba33, 0x839fd94f,
-	0x3d774bd7, 0x9c12fde3, 0x31d57fef, 0x1f56c7d4, 0x05718f8f, 0x3a4c53d0,
-	0xd662cba7, 0x98fe45a2, 0xbd29dacc, 0x7a52f585, 0xd4a7eb1b, 0xa622ccc1,
-	0x694ecca5, 0x3a527319, 0x2d28799d, 0xce942d67, 0xce94ed64, 0x8294bd62,
-	0x93a9433d, 0x9aeec999, 0xa637fb07, 0xd293980b, 0xa50f31ef, 0x7e9ce999,
-	0xc10b582b, 0x4a76b377, 0x24ef803b, 0x8c01fa3d, 0x9c827694, 0x904df4c3,
-	0x79769873, 0xa3652625, 0xd287201f, 0xa53b5e23, 0x94c5bcc7, 0x541d78f6,
-	0x396f6def, 0x9d78efa5, 0x56f09e94, 0x75ebda50, 0xde53bd51, 0xf5df4a1a,
-	0xcf7d287a, 0x69e940db, 0xdfd28faf, 0x1d299b79, 0xc67e07a5, 0x2be9cdf9,
-	0xf53e7d44, 0x0243bd23, 0xe591ecf9, 0xe68761d2, 0xb8f1dc99, 0x40661a6e,
-	0x235b283a, 0x7359fd20, 0xa43f0e34, 0x0b56729b, 0xe1ba42f7, 0x0cdfd704,
-	0x0fd248d6, 0x82f56dad, 0x0876ed04, 0x5808da7d, 0xa9e9e9cb, 0x9f208d73,
-	0xbad93a4b, 0x19c23b08, 0xee81194f, 0xfd3ce876, 0x64bca03b, 0x08d734a7,
-	0xc8e4d67b, 0x8fb1ff53, 0xe93e54c3, 0x03346b08, 0xfb3d2b3c, 0xe38138a9,
-	0x7befc281, 0xaee6733b, 0x253c44cd, 0x34c5f3c2, 0xbf512c30, 0xfa44c47e,
-	0xd9db6175, 0x93c00d42, 0x68454c1a, 0xebd40617, 0xae1fba42, 0xf2b9705e,
-	0x9655b6dd, 0x0d879c46, 0x0e5a809f, 0x7d19a959, 0xd5f3ab85, 0x5ebe6aed,
-	0x837b4cff, 0x09eb03fe, 0x7f6f6837, 0x7d32a396, 0x3a7effc2, 0xdd6fa60f,
-	0x6bf68ff5, 0x8e640fc8, 0x5774fdc1, 0xfd339734, 0x04ee9fa0, 0xc8c577bc,
-	0x1a4cc6f0, 0x5c43ca17, 0xd29b0db7, 0x77803efd, 0x1f573985, 0xd47ff2c7,
-	0xd14277d8, 0xa6d770ae, 0xc933825c, 0xc621b13f, 0x8f931393, 0x97df3cfa,
-	0x0d1f935a, 0xbff80293, 0xafcb9d39, 0xe95cb7ad, 0x447681dd, 0xc16586b3,
-	0x979b3b77, 0x7681cc6f, 0xf419bc7e, 0xdc478007, 0x0b31bd5a, 0x6a37d3ca,
-	0x19656a26, 0x78fc7887, 0x4d9ef573, 0x8f255fa8, 0x7686c98e, 0x99796433,
-	0xb857db1a, 0x55bce806, 0x95a7b6af, 0x7e649ff4, 0xce6686a9, 0x954d6c82,
-	0x3a1df4ed, 0xdfb81156, 0xefc64cfd, 0xd53c5957, 0x57fdcedd, 0xfee19186,
-	0x25fc6027, 0xc3bfb923, 0xfe48ceb2, 0x7ff24b0e, 0xca03bc9d, 0x7634db2d,
-	0x6b44e954, 0xea1d5aed, 0x3b598bfb, 0x810ee3f2, 0xe14bef7f, 0x0a28217a,
-	0xec0373e9, 0xd3deadf2, 0xfc03328b, 0x9f0ab684, 0xc97bf680, 0x0fa15ac8,
-	0x07e49ff7, 0x2dfbb405, 0x15c12e15, 0x8781f689, 0xb965cfca, 0xf80e927e,
-	0xfbe12ad9, 0xb992fd40, 0xa15d7012, 0xd2768adf, 0x605158f3, 0xf8b3a77f,
-	0x3b07ac3c, 0x75d5f499, 0x782bc27a, 0x97654ebe, 0x95f6c01e, 0xff2e0c75,
-	0xabb7067e, 0x5d013d77, 0xe24c1f20, 0xdd89f376, 0xce3fa489, 0xa0770d69,
-	0xa9e274fd, 0x6f0465d1, 0x3d40ec99, 0xc9eec4f2, 0xb39d31d3, 0x3bd52665,
-	0xb41eb021, 0xb96ce787, 0xd4fcc45b, 0xdb0bc00c, 0x7a27a33b, 0x41e5b39c,
-	0xcb47fbf9, 0xe358bcb0, 0x91da09fb, 0x22fb8dc5, 0x1c9e4ed0, 0xa6124af9,
-	0xf57d3427, 0x5dffd0dd, 0xdc2bf666, 0xe31b9d9e, 0xfe1cb1fe, 0x74a9f731,
-	0xbfd7ea1d, 0xf5a74f4b, 0xc41ccf9c, 0xec835007, 0xf6f65bba, 0x8a4d061e,
-	0x3fded6dd, 0xe65ccc15, 0xc11f30e8, 0x5ecbb4b4, 0xd657d386, 0xe9823ce3,
-	0x194f5ef4, 0xa7e52faa, 0xba608e5b, 0x3bf5d724, 0xff179f9c, 0xbcaf7be1,
-	0xc7c8f008, 0x07a8cdeb, 0x37d13e65, 0xebf92763, 0x21f90c74, 0x45a7926b,
-	0x746c048b, 0x787ca0c6, 0x835169f6, 0xad21b9fb, 0xc3610c25, 0xb41ae97d,
-	0xb745770b, 0xb3b8d0d4, 0xe3ce19c2, 0x210fb0db, 0x3b45645d, 0x809f9063,
-	0x3e1d692f, 0x10d3e993, 0x634731ed, 0x1fcf187e, 0xe1ce17a8, 0x5af503f3,
-	0x27ea04c2, 0x13fb2046, 0xbfdc06d4, 0xddfef26d, 0x38093cc6, 0xcf48d61f,
-	0x64ebf40e, 0x67fe7095, 0xb02e9c91, 0xfa44d37a, 0x96cd9c84, 0xb89dcf16,
-	0xe897560e, 0x3ba40beb, 0xf40706d8, 0x19827491, 0x055bd7da, 0x219c830e,
-	0x7e87f0bc, 0x42c98b0c, 0xbf828d7a, 0x0bda02b5, 0x1c7033d0, 0xdf834cf3,
-	0x9b177429, 0x4235c7c1, 0x65acbfa6, 0xdf053dbc, 0x9f2e0cb8, 0x83496f01,
-	0x7c6568f8, 0x009a1c60, 0xd1ea027c, 0x66f006f8, 0x05d21b76, 0xa7817a48,
-	0xc703124c, 0x8471ad5f, 0x7a645da1, 0x4fe8fbf5, 0x02394289, 0xf753fe78,
-	0x69f22324, 0x327238f0, 0x46df08d2, 0x6f5187d0, 0xfce2e99f, 0x11e958db,
-	0x18423ec8, 0x3a2c9fc7, 0x35681fd0, 0x017416ad, 0xf326b5e3, 0xa5667a7d,
-	0xcae51ba7, 0x3b08e2cc, 0xac9df7d2, 0xf3999d7d, 0xc04c91f7, 0xf81b146f,
-	0x41c4d899, 0x4f47f0bd, 0x97127bbf, 0x97b59934, 0xf9fee2e4, 0x70b3fdf8,
-	0x3a3eb6fd, 0x4ff107b3, 0x3baa79cc, 0x5e741a06, 0x197dd794, 0x6ca4ebf7,
-	0x1c0e3f13, 0xe0079247, 0x8d44bf40, 0x41e81cba, 0x65742b05, 0x71a21a13,
-	0xe444d1bf, 0x7a819ccf, 0xe486944a, 0x6129c83b, 0x33fd4841, 0xf9e4ae88,
-	0xaee7d657, 0x375a4c8c, 0x03af89ab, 0x171bb7eb, 0x5583ca46, 0x6dfa09d6,
-	0x011f3604, 0xa658df74, 0xd7680bf5, 0xac28fd62, 0x919de2cf, 0x8769d743,
-	0x03399a4e, 0x1ac3f4e5, 0x74366ef3, 0x7edc815e, 0xc3ed7a4b, 0xf90e5471,
-	0x7dfc91a2, 0x436af801, 0xb8f5eac1, 0xac6dfd59, 0xb48cee6b, 0xc989f9a1,
-	0x3ee2660b, 0x68cb589b, 0x47cb83fd, 0x575ea63d, 0xa3c737b2, 0xbbf988ff,
-	0xce7ac1be, 0x8655de4c, 0xbaf07cfa, 0x1a97742a, 0x105f7a1b, 0xa65f3933,
-	0x954fd846, 0x92215e93, 0x114ce09e, 0xa2ed03e3, 0x1f7c190d, 0x1335fdba,
-	0x23ec43ed, 0x5cb71fa3, 0x93ef577b, 0xa50eb0b9, 0xae683457, 0x1cefa3b0,
-	0x484ce1fa, 0xddeafda7, 0xf50affd5, 0x1a657da6, 0xb06ff987, 0x10e819be,
-	0x9d80f5f1, 0x2fdaf001, 0xa3a0b4f6, 0xd992b1a4, 0xfa55df71, 0xf3f723d9,
-	0x49df9d0b, 0x645735f2, 0x820e493b, 0x2f401e65, 0x7e896900, 0x56731978,
-	0x68dd90b6, 0x5907cccd, 0xf6bd6e8d, 0xfe5fb425, 0xefd0cf49, 0xd242af38,
-	0xe7f8c095, 0x65ba4a55, 0x5917c7e8, 0xf311ea39, 0x3f94ec2b, 0xf3ced2bf,
-	0x417f3c8d, 0x17f28385, 0xbe783a54, 0x3e61f209, 0x7bf85616, 0x42eed0bd,
-	0x41a48c53, 0x93a5783f, 0x50355f97, 0x0f603bf9, 0x87c90264, 0xde49f987,
-	0xe1a67cb7, 0xb84f12f1, 0x0d5c005f, 0x123d4591, 0x1a7ddfce, 0x8624167b,
-	0x01999114, 0xe9c2b67e, 0xf3f942d7, 0x13809fcc, 0x6af546f9, 0xbfe43667,
-	0x719a2c91, 0xc0386f7c, 0xabf9c66e, 0xe9de6915, 0x351bf007, 0xd8cf14c9,
-	0x7dadfb21, 0x67e48c2b, 0xfc875d05, 0xa2456cac, 0xf2f0c7ac, 0x7ecdcb6d,
-	0x0e40c7d4, 0xdff63ad2, 0x001e9227, 0x1cedf0f2, 0xca5e8bd4, 0x484987b4,
-	0xb37e6ab7, 0xa12f2f54, 0x19992af6, 0x9559f2ed, 0x97c6bdbc, 0xea0d7e34,
-	0x3379a655, 0xf71a0e91, 0xafda3b32, 0x2a9f56cf, 0x9b78458b, 0x87e5cedd,
-	0x56342e5a, 0xe12e396f, 0x731a3c78, 0x7ee7d516, 0xe94f46ad, 0xc830ad2e,
-	0xd2deb4cf, 0x2a18fca0, 0xd83dec6f, 0xa955424e, 0xb3d4137d, 0x8fd138c0,
-	0xf3cf4dbd, 0x1488f77d, 0x8b54b067, 0x4182e65d, 0xa7914efe, 0x187c82d0,
-	0xc545f245, 0x525fa35f, 0xf9923fc3, 0xc45df814, 0x3176f971, 0x5d95c93b,
-	0x27207aea, 0x52af2835, 0x67f9d4da, 0x2fc504b2, 0xe0879aa5, 0xb87ab679,
-	0xe71e0bdc, 0xc2bab8e0, 0x34b8d146, 0xd7285c7c, 0x74d73f20, 0x2b73f288,
-	0xa124bb45, 0x853f6bbc, 0x92f51fe3, 0x9e00bac8, 0x13345d55, 0x66d669e9,
-	0x6643b90d, 0x0b925eb3, 0xe2b71b37, 0x671e08df, 0x6436f8f0, 0x1cdf6968,
-	0x1bd707d0, 0x7d6c1f49, 0xb8c1a4c4, 0xe15be822, 0x973857e8, 0x099e1a55,
-	0x532230f3, 0x6bafd7d6, 0x34693cb9, 0xacea9d11, 0xfa04e58f, 0xa5d1841f,
-	0xeebeb023, 0x72bcec7a, 0x68e91b8a, 0xac72c1dc, 0x93639658, 0x2a7c60fa,
-	0x933873ff, 0xd6f7e602, 0x7c1518fe, 0x5544d5fb, 0x2e1012fd, 0x8d53e581,
-	0x69f2aa79, 0xf82a71e6, 0x5514db0e, 0x54d219fd, 0xce677c15, 0xb3faaa9d,
-	0xf055f3ed, 0x544bc55d, 0xee3ae7f5, 0x2fcf9555, 0xbe55487f, 0x0546b9d0,
-	0x7bf8aa2f, 0xaec5fd55, 0x92f95546, 0xe555279a, 0x9293f6c1, 0x3f726696,
-	0xe79b56cf, 0x8be483a4, 0x0e46704b, 0x14a967ad, 0x3dd703fb, 0x53eb822a,
-	0xe51af5c1, 0xe04178f5, 0x48feb1fd, 0xe29df20d, 0x91ed637f, 0xd75cff2a,
-	0x3ec6c9e4, 0xec72fa13, 0xb2dd23ef, 0xc51fdc13, 0xc53bfcfc, 0x04fdd57f,
-	0x56f683d4, 0x715ba647, 0xabbf43bf, 0xf9fd0f4b, 0xb7bfe435, 0xb40bd736,
-	0xe7ae6e0f, 0x7aab957e, 0xc00d8ae6, 0x7ef38583, 0x828e78e5, 0x70447327,
-	0xcf1860ff, 0x95fb26df, 0x52bf439e, 0xb03f6336, 0x17787e28, 0xac509bb5,
-	0x467fa1f7, 0x7a08f6a8, 0x662e5b94, 0x07284836, 0x97ff5397, 0x5823ec2b,
-	0xd2567988, 0x398daf56, 0xbd5b7da0, 0xc61ead6f, 0x69399756, 0xbcd0b3cb,
-	0x1fc8c3cd, 0x94e668f3, 0xe7816b2d, 0xa25321ff, 0xf9104975, 0xf75f3f3c,
-	0xd03db9c6, 0xa5956b5f, 0x706ae508, 0xf3bb9279, 0x941bb1e2, 0xd5f2bf3f,
-	0xd1bfee0f, 0x671d75f7, 0x87ca029a, 0x24568bf5, 0x1d004732, 0x7ed08648,
-	0x74c81ff9, 0x27ac9ee5, 0x5a33d63f, 0xcfc893d7, 0xd7ff2617, 0xddf0bdc4,
-	0x3dcae979, 0xfe43a7a8, 0xea1f300f, 0xcf9ebcd1, 0x29e744bc, 0xbf40f352,
-	0x2c3bfd47, 0x941edd34, 0x95ad17db, 0x5a07e8fd, 0xd097a91d, 0x7e324fce,
-	0x0eea7e46, 0x83abb71d, 0x07e7f7ed, 0xb276edec, 0xedcbf7bf, 0xad5396ec,
-	0x8ccf7f99, 0xe45a263e, 0xf98840f8, 0x09b546d0, 0xab12af28, 0xf9024fc5,
-	0x4f523ba2, 0x498b047e, 0x6a983bf6, 0xc5017e54, 0x791dd06f, 0x6f7480bf,
-	0x7e415ae9, 0x6017f47a, 0x75e5077b, 0x2417f609, 0xe8b4ff19, 0xb51bd8e3,
-	0x23f206cf, 0x04fd1084, 0x27f8a1e1, 0xa3f1fb82, 0xccfb813e, 0x27d270ca,
-	0x397dc782, 0x6650e4b3, 0xff48f23c, 0x7e503bc9, 0x7ed1d29f, 0x84bd1c38,
-	0x1fcce149, 0x266f7ed0, 0x7223efb7, 0x91f95462, 0x0fe644f6, 0x64b35ff4,
-	0x321127f3, 0x48cc5b0c, 0x51c6df7d, 0xbcdbdfd8, 0xbb3a13bf, 0xd841f48d,
-	0x7bfed0f6, 0xeee7e64f, 0xab69465c, 0x01b7976c, 0x9cfa631f, 0xd9fa4cd7,
-	0x843fe036, 0x4a257bb7, 0x4a1cdefd, 0x54ed7a77, 0x4c5bcbbe, 0x83af1ef0,
-	0x72debde0, 0x9d79f74a, 0xb792ff94, 0x7a9fe082, 0x7bb6945d, 0x15ff286b,
-	0x03e087af, 0x5f8206de, 0x44507d45, 0xa533753f, 0xa85b786f, 0x46dbd3bc,
-	0x3f5e9bf0, 0xbdde5da5, 0xdbc87f94, 0x6f11f04e, 0xbcc7c107, 0x78f7045d,
-	0xdb7d287b, 0xeff94bdb, 0xdc134f78, 0xb1938f2b, 0xfa2f5ee6, 0x84a25c2b,
-	0xaeb3ddfa, 0xd7ea336a, 0x331a65b6, 0x9736f38a, 0x39fa0566, 0x78f255b6,
-	0x86956d9f, 0x87a040fc, 0xb39f51fa, 0xf8fa7b2d, 0x405f2a34, 0x49b15be5,
-	0xabac4a30, 0x56cafeb8, 0x159ea9ea, 0x77c1020f, 0xfd2b6adb, 0xb25b805a,
-	0xbadca9c3, 0xedbb244a, 0x3a278d79, 0x245deb9b, 0xae3aadbf, 0x1074283f,
-	0x22e9fb21, 0x974a44b2, 0xa3fc7365, 0x23ef4232, 0xfc4a5919, 0xc707b9a4,
-	0xf182ab67, 0xf555be21, 0x5a5f8c46, 0x49f183ef, 0x3aae3fa4, 0xc3247804,
-	0xc07f1178, 0x6cc2fc87, 0xad97d719, 0xaf08eb55, 0x94f365e4, 0xda346778,
-	0xfa9e6de9, 0xa56f84b9, 0x36cd7e48, 0xfbe8a1d7, 0xe7ca4e50, 0xe1f1ac7c,
-	0x50fe7f4e, 0xf082327c, 0xddb8c6df, 0xd2fa0c90, 0x00e310fe, 0xc7a9478b,
-	0x198f78fd, 0x26f1fa43, 0xb2627acb, 0x3d8ff9c0, 0x6dff122c, 0xc1f7a067,
-	0x7e81cf77, 0x503943e7, 0xfa156fba, 0x72cd1eab, 0x3c02cc4d, 0x3f8d247e,
-	0x531c0224, 0xaf4fdbce, 0x1ea0f717, 0xae7deb0d, 0x3e37f209, 0xb689d9b8,
-	0x6966ec71, 0xdb5bb22d, 0xd01357b2, 0xa82c95ff, 0xcb4947d7, 0x3bb63c65,
-	0xd5cf7b78, 0xb64fe48b, 0x76903aae, 0x865bf784, 0xfa8e26fd, 0x61ba187d,
-	0x1a481632, 0x55c91914, 0x2fec45e2, 0xe5cda1ec, 0x66fc5fd8, 0x215fd287,
-	0xe775f7f6, 0x65e3e469, 0xbc085756, 0x37279386, 0xb38b2393, 0x8e48e322,
-	0x9424b124, 0xb8ebcf23, 0xe49df2dc, 0x861d24fa, 0x1fb43499, 0xc4ae7e25,
-	0xe8e383d3, 0x243d3235, 0x61c74219, 0xfde80d57, 0xddb7aa3e, 0xe749c9b1,
-	0x0b3e304b, 0x6c75ab45, 0xeaf3ae05, 0xdaf37092, 0xa4a0f410, 0x018e505b,
-	0x468bdfdf, 0xb9b3b523, 0xe1a3b79c, 0x56cadced, 0x32625c11, 0x6bc842fb,
-	0x6e5a7d25, 0x4e2c81e7, 0xbe0f49b7, 0xae18f1b4, 0x3a3adbef, 0xc69cf413,
-	0x04ed11bf, 0xc92d09df, 0xfb6d44d7, 0x78013d8e, 0x79e3cb35, 0xb5cfef4e,
-	0x7b40ff23, 0x915728f9, 0x7fc9f25f, 0xcc0566c1, 0x5addf2bb, 0xa3fd8fd9,
-	0x29a21b6b, 0x2eb55cbe, 0x36a3f50c, 0xb07a2466, 0x85d13cea, 0x4560f401,
-	0x1f410cba, 0x4af4b2fb, 0x3254d53c, 0x7c32e311, 0x728a9e5f, 0x583ef009,
-	0xe1fb451d, 0xdeef65d4, 0x5be01639, 0xd47688ae, 0xe5ab9ecb, 0xfd2713e7,
-	0x26e74351, 0xdb9c7cde, 0xb7fdb77d, 0x7bf41eb2, 0xb3e9c827, 0x7a41e768,
-	0x77b3334b, 0x52dcbac1, 0xcdff226d, 0xb3c557ad, 0xb91a7681, 0x7da3c7a4,
-	0x5335fdc1, 0x803ca1fa, 0xa67d26fe, 0xaa330fae, 0xa1233d45, 0xab6f9d4f,
-	0x1a66703a, 0xcb56d3f4, 0xf6bb6e3f, 0x7d8471fe, 0x93f21af5, 0xf429f500,
-	0x4dfe4093, 0xe78097d1, 0x191a3716, 0x32eb73c9, 0x41e519a3, 0xe49c25b7,
-	0x1362db5f, 0x321ba1e9, 0x9ea18757, 0x8faaa86c, 0xdea474c6, 0xa77d03b7,
-	0x7dffbbdd, 0xe4812d9e, 0x817f3f2d, 0xfa0c5984, 0xae7abdc0, 0xb6faf8e4,
-	0x7944cb4c, 0xc3f2a1a9, 0x8b7dffbb, 0xac077d0f, 0x3490f085, 0x7e0f912c,
-	0xe29bbe00, 0x2fdf02d4, 0x444e6740, 0xabae74f8, 0x4243e507, 0x8b1baf9c,
-	0x56ce9ab6, 0xcae2f9d2, 0x5d33e238, 0x31e987b5, 0x18c8b2bf, 0x9f0ae7c8,
-	0xfffcb5fc, 0xbbe71cb4, 0x59b81c99, 0xf7e337bb, 0xbe73a59f, 0x369ece19,
-	0x154f230c, 0x9acf18fb, 0x4b6c8a63, 0x7d59eafb, 0xf6eafd48, 0xc567ce6c,
-	0x643e7e7a, 0x72f4c54e, 0xfaf8c38a, 0x96c73c44, 0xa9f9cd93, 0x714912cd,
-	0xd674b6e2, 0xdf037185, 0xf7f70d72, 0xdafff1c4, 0x3fc9d32a, 0xa2782ad4,
-	0x3e78197d, 0xeb8695c2, 0x147306d7, 0xa6b7fd09, 0xfcceb972, 0xabc6331e,
-	0x409a9da1, 0xf3dec1fc, 0x9198e9a9, 0x0bfe4c3e, 0xa49ef12d, 0xa3b7f00f,
-	0x17fd1c5f, 0xdadddfc1, 0xbf6f86af, 0x984b86aa, 0x354f054e, 0x6669e1aa,
-	0xe6c96c35, 0x361dfa7a, 0x490cfe75, 0x1ca7270d, 0x73f0d309, 0x7f01a6ed,
-	0xbbf044b3, 0xa07e0199, 0x01769a0d, 0xafa525e7, 0xadb2fc96, 0x93dfdca9,
-	0x73f6af5c, 0xb596b224, 0x6df90231, 0xfcb6f954, 0x73fa0255, 0x7cead56c,
-	0x8c150798, 0xbff48acb, 0x9f95d724, 0x02e9718d, 0x4b3aee7e, 0xc5cde9eb,
-	0x238b6875, 0xcf934a3e, 0x1fdd0d05, 0x95b8d0b7, 0x7c0f9076, 0xfa45e301,
-	0xe62f840f, 0xc76726ba, 0x05f03e73, 0x7df997ee, 0xa503e43a, 0x41f8e1bf,
-	0x3962c7e1, 0xab9ca26e, 0xa5b722b9, 0x97a9ab9c, 0x0475c7cf, 0x92b9c79d,
-	0x81e7465c, 0x09aef4ae, 0xc877c50f, 0xce6cbe67, 0x946e9877, 0xdf20d7cf,
-	0xef9cf4f9, 0xd5f0df30, 0xfd28672a, 0xafbcbcf0, 0xcc37b43c, 0xf8c071fc,
-	0xab47b656, 0x82477760, 0xd3bcf039, 0x740ff843, 0x3a3337ba, 0x0f2b5a47,
-	0xbf338be7, 0xe908d3db, 0x0b975a5b, 0xd66567d7, 0x338f3d59, 0xfe51ebf5,
-	0xdff7979e, 0x38dd820d, 0xdb94c05a, 0xbb668da5, 0xccbdfd11, 0x57f2a19f,
-	0xd5877e28, 0x31acd22b, 0x0188ff80, 0x4cd3823f, 0x33e34de7, 0x35118fc9,
-	0x2b3771d5, 0xccf73c04, 0xa2046f98, 0x554e85dc, 0x658fc790, 0x97d0fd97,
-	0x035e383c, 0xce02abfa, 0x0f441923, 0x3573b923, 0xe7014995, 0xff655bca,
-	0x9b1f00c5, 0x7f609796, 0x7896cc3f, 0xd679863c, 0xda9fff72, 0x6ab8665f,
-	0xd833b553, 0xdfaab27e, 0x722fd956, 0xfed5f6f3, 0xf4d5c337, 0x0ecfda61,
-	0xb21cdf6a, 0xd576c1fd, 0x11afbc7e, 0x3e436f1f, 0xb5ffce18, 0x1ba7965f,
-	0xf45e9e6c, 0xd818e97f, 0x06071495, 0x6a8898fa, 0xc369ff23, 0x5d5379f9,
-	0xa60fdab2, 0x1f927e63, 0x90d647cf, 0x3e6048fc, 0x9859df8a, 0x47d7f287,
-	0xbbf1e74d, 0x1371b960, 0x8798c179, 0xfd00dea1, 0x3f57f2a9, 0x46d3f7c2,
-	0x3c42eec1, 0xfff3c783, 0x89abdd8a, 0xfa4bdf1c, 0x64b84a73, 0xdbde81b8,
-	0xe32575ea, 0x3dc21bf7, 0xfeeb1835, 0x762ebb3c, 0x1b3de83d, 0x7c08c630,
-	0x71bb3576, 0xfb84cfbe, 0xf58fa724, 0x27a21a71, 0x1d96ddcb, 0xb27a00da,
-	0xa8695de8, 0xf2345af7, 0xa1fc2f39, 0x65bd6cbf, 0xfd10a6e7, 0x029bfa2b,
-	0x8f002b5b, 0x956dba00, 0xfe81e6f5, 0xd0ee2496, 0x3163b406, 0x3fa90ab8,
-	0xd2a35ce5, 0xeb37d35f, 0xf7ecab6f, 0xdeb3fa52, 0x559f1ea3, 0x59f1a1ef,
-	0xe947fde5, 0x2f8e2b6f, 0xb4dd5f04, 0x1e8ed93f, 0x7aa96fe8, 0x8783567c,
-	0x72d567c6, 0x7f40e1ff, 0xbfacdf4d, 0x931ef936, 0xe1d3e64d, 0x0e37fdce,
-	0x1a76ab9c, 0x29b4ae51, 0x7f7940fe, 0xbfb414bb, 0x37f796ad, 0x714bfbe5,
-	0xbddfe4e9, 0x18df33d4, 0xfdc35f6a, 0x247ac98c, 0x2648f593, 0xcf0891eb,
-	0x3ea67a99, 0xf0b0e81e, 0x22f9b6c5, 0x1e73e3ec, 0x153e333a, 0xf62f19e0,
-	0x5f6117cf, 0x99e2f39a, 0xc9f04903, 0xccbe2fcb, 0xe6787fcb, 0x9b94324a,
-	0x2fcdef7c, 0x962a3803, 0xde0ac7ef, 0x8db7bf4a, 0xbba37ae2, 0xbfee73e1,
-	0xfb8af904, 0x87aa6356, 0x42f17fa1, 0x32d47f72, 0xe94eefa8, 0x310f2cb7,
-	0x6eea4a2f, 0x467e4f38, 0xff287914, 0x40bfe1e6, 0xee53cfb4, 0xefab9467,
-	0x6d454467, 0x8c2ffd22, 0xef28cdf9, 0xba0e8c22, 0x28d6f84f, 0x642c1fbe,
-	0x376e0af6, 0x39f25948, 0x31cfba0d, 0xd76e58bf, 0xb1cfcb7c, 0xb1c6a17c,
-	0xdfd9ed1e, 0x478aaa4e, 0x173958f5, 0x7f783797, 0x1bf5d772, 0xbe0e1f9c,
-	0x23e7393f, 0x23c2eb81, 0x3ba5bfb8, 0xb9f7e257, 0xa886fc02, 0x9f370ef7,
-	0x7db8a3b5, 0x0e9f383f, 0x0e319f3e, 0xfee69f3e, 0xfeb0b5a8, 0xcb7ee8ee,
-	0x5d9fc413, 0xc86be721, 0x5fcd06bc, 0xd8a628fd, 0xb7a45a79, 0x32b7cd9b,
-	0xc1f9caaf, 0xa2ca4146, 0x794feafd, 0x3183fd2a, 0x8e2a14bb, 0xb819f483,
-	0x4e6deabf, 0x5d19fe86, 0xcf073d9c, 0x45fe3795, 0xde5cf21b, 0xd63e796e,
-	0xb9d38546, 0x3d28c6ce, 0x51dddbd9, 0x97fa1933, 0x9a74d345, 0x72a8b297,
-	0x8da96f3a, 0x8f68ed65, 0xd7239f06, 0xce9bb88e, 0x68ad6901, 0x703a4041,
-	0xa461d92e, 0xe8b989f8, 0xc5c8e786, 0x8f239d9b, 0x91cfc999, 0x7425e947,
-	0xea45b459, 0x7f239e43, 0xf7df146c, 0x713c71bb, 0x278c3f88, 0xa21c706d,
-	0x31d1c799, 0xf5f2023f, 0x7f231766, 0xc7de3cba, 0xea5075e4, 0x861ecc1b,
-	0xb7ab40f2, 0x68a7a84b, 0x613ef9c3, 0x4e5869b0, 0xf7c8bf08, 0xfbe8e947,
-	0x34cd724f, 0xd7231aaf, 0x5afce7cb, 0x7a4fe908, 0x4fe29475, 0xc3674d0a,
-	0x0d3cc9d1, 0xf0a7473f, 0x9e9302e1, 0x302df7ce, 0x0fd14ad9, 0xef0800b2,
-	0xfa8098b3, 0xf7e22db7, 0x0dbb4581, 0x5337e7e9, 0x6ff9ff6e, 0xb9f9ba18,
-	0x43353e7c, 0x4ee3f747, 0x8f61cc09, 0xd57e7a19, 0x869e8ce9, 0x66bb9a6e,
-	0xec87599d, 0xeff2e2f7, 0x867b6115, 0x167553e3, 0x779fec89, 0xa85ca146,
-	0x0f1f5b4e, 0x42caa2f0, 0x94dfdd1d, 0x08ee44e3, 0xd19fc72e, 0xa28e4eba,
-	0x51e7d178, 0x624748a5, 0xa3e22a7f, 0xea0289c4, 0x9e2a37bd, 0xd7e1cdea,
-	0x18dea0c5, 0x7f67d394, 0x1eb462ef, 0x127a50b6, 0x302c4fda, 0x07cb236e,
-	0xf302a3b4, 0x01627ed1, 0x2f2c27eb, 0x9085f6b6, 0x609a4a17, 0x0d5292db,
-	0xd0909e7c, 0xff92a942, 0xee5b43ac, 0x57aeb10f, 0xc6fd75e5, 0x601b4c76,
-	0x8ed0713b, 0x2ae5fb01, 0xd517dbce, 0x61e32ca7, 0x17657548, 0xe9b18ec9,
-	0x88933e15, 0x1e6106bf, 0x45fb04af, 0xd5b0de75, 0xfba14beb, 0x6d38f2fe,
-	0xa346d62b, 0x1c55031d, 0xbcdb9f48, 0x9965296d, 0xcec8e383, 0x8d13e991,
-	0x17a889b6, 0x5c725ff3, 0x97f40ccb, 0x74349b24, 0x5326013e, 0x6e612f75,
-	0x38b4f459, 0xccdd4534, 0x2ed0926e, 0x3f3d25ef, 0xf896bae1, 0x62f0e120,
-	0xa4ab7186, 0xef0176b8, 0x23f40d03, 0x97ae6fdf, 0x5c57b9e3, 0x048e3465,
-	0xcefec0eb, 0xf38d0ec8, 0x747945cd, 0x518e69e5, 0xe5d58fc2, 0xdcfc71c9,
-	0xe1d5fdc2, 0x3ae8097e, 0x4057b6a9, 0x380c0138, 0x5c27c5f4, 0x426b4c6f,
-	0x045af279, 0x6db58bf9, 0xf207cc99, 0x45745527, 0xfb3ce0e5, 0xc9a6ffa5,
-	0xdf0b0790, 0x9c207cad, 0xa136b3f4, 0x25d90665, 0x285869f7, 0x1c98cf3f,
-	0xc828c7ee, 0x609ffce1, 0x1ea94d6b, 0x44d3e987, 0xcf975f37, 0x1db39067,
-	0x9f11d9f4, 0x1c58fa2d, 0x759a7bd4, 0x9b73e9a1, 0x7ec0efdc, 0x185fcf21,
-	0x7f911973, 0x3b9382b5, 0xdbeef739, 0xce82cfb7, 0x55e74613, 0x8d7ac936,
-	0x4e444ed2, 0xd846153b, 0x45cf0c1d, 0xdf07660a, 0x9b3ecc07, 0xf9abd60f,
-	0x7b486d2b, 0x791cc1eb, 0xb26b491f, 0x4cb2fd61, 0x94fd0dbb, 0x1a55f7c1,
-	0x70da26d3, 0x0c671a7d, 0x7031a9d0, 0xcb4ee85f, 0x53cf1f7e, 0x2c747a99,
-	0x70591cf0, 0x2173c7aa, 0x972837b1, 0x1d3797cf, 0x9b42e7e2, 0x78bd454c,
-	0x14c9a10e, 0xfec74457, 0xa99cfc4c, 0x3a64df52, 0x64def246, 0x1356f1e7,
-	0xa2020fee, 0x3ba1e7c7, 0x83cd18ed, 0x0e5a6f52, 0x7b26ab97, 0x5bfbc317,
-	0xd53f76e1, 0x3e9d130b, 0x161fe00d, 0x4ffee8c7, 0x55f39198, 0x318fac04,
-	0x7e95ef80, 0xd1d1cb6f, 0x172535bc, 0x7e1096f5, 0x6704de22, 0x1b22b64d,
-	0xdf38dbed, 0xb4636fd0, 0xaf9cdf42, 0x5be7971f, 0x3e51a769, 0x434f7aff,
-	0x58b2fcce, 0xd73913f4, 0xa6bb60e4, 0x83b446e5, 0x6fe391b4, 0x6186ded8,
-	0x285e6bdb, 0xf238f7b7, 0xc8b23685, 0x50e9ed8c, 0xc3a0845e, 0xfe76e467,
-	0x30ede357, 0x97df74b3, 0x9f305a60, 0xa3de942d, 0xa38c46a4, 0xddfa1b8f,
-	0xebbf9637, 0x90247ed4, 0xfc717bbf, 0x1ecf932b, 0xee1ca12b, 0xdb2eda3f,
-	0x619d8a27, 0x2ededb91, 0x3ee87bf0, 0xef4edc21, 0x8776c836, 0x0f3d4c25,
-	0xf941f783, 0xe0ae5c3a, 0xc72ee6e7, 0x046b8a31, 0x77e5f3f3, 0xb40e8a3e,
-	0x73ef504f, 0x04bb7364, 0x1c4bb453, 0x610d9fb2, 0x9da01bf4, 0x80fdf0a2,
-	0xfa42b75f, 0x3f005ba7, 0x0d6fc803, 0x7b242bb4, 0xc90dbe88, 0xe7c8697d,
-	0x053bf2a9, 0x5cd7f643, 0x4785a72e, 0xfe434b3f, 0x4feb8b2e, 0xf982efc0,
-	0xae4785fc, 0x5e78e026, 0xce703198, 0xab43e286, 0x7bf3a717, 0x1cffc7d9,
-	0xfed10aed, 0x457feecd, 0x86b4dd9d, 0x5ce5c0f4, 0xdf5bfc0f, 0x8cbedb07,
-	0x821d9deb, 0xcda4efda, 0x5fe77ae5, 0x7acc7de4, 0x2df7a455, 0x2eb965ce,
-	0x0ab61f20, 0x7f28e5e6, 0xe7e11f53, 0x5e3f56e6, 0x2103d9ff, 0xed1841f8,
-	0x804e73fa, 0xacdc5c3d, 0xa35a3f27, 0x8dc47d29, 0xafc31ce2, 0x71cb87b3,
-	0x1e4b7d79, 0x24f3f235, 0x5b17ae2e, 0x39d3f75c, 0x23f3e095, 0x243bd5c3,
-	0xbea53dcb, 0x7947db01, 0xfe479a62, 0x23684b80, 0x964dbfa0, 0x7678c17b,
-	0xf3c864e2, 0x12b90463, 0x18456875, 0xed93abb6, 0x3f8aedb1, 0xe8c8a2a3,
-	0xb75ef808, 0x1a58c8b8, 0x8c8d2f40, 0x6e0ddf9f, 0x01dcceff, 0xafa55a7d,
-	0x459f70e8, 0xf89c50df, 0x433901a7, 0xcab8658a, 0x0ffa518e, 0x70163f3e,
-	0xf38c2c5e, 0x5a67b729, 0xe818dcf1, 0x962b6bb7, 0x6df9c48f, 0x582f5d15,
-	0x3ffa1e61, 0xe739d030, 0xecbe650f, 0xb872f993, 0x43b1f3f5, 0xf6318ca0,
-	0x97823b04, 0xc64e80d6, 0x68fe408f, 0xfb94d4cc, 0x5cb38c43, 0xfd08671e,
-	0xafdcd6fa, 0xe6975fa7, 0x51afd086, 0xc504767f, 0xd461021f, 0xf4211d9b,
-	0xec8213eb, 0xedcf900f, 0x1d49d09c, 0x270f307d, 0x6f611d6e, 0x919ee894,
-	0xf6045ec3, 0x32678bc3, 0x239f6f51, 0x23c7bc0c, 0x608c31db, 0x221623b0,
-	0x6799735e, 0xc50203df, 0x48ee5a51, 0x5c04eea3, 0xa7ad9b8f, 0x3711fb24,
-	0xdc613ac2, 0xb2daf5a1, 0x0ce2a119, 0x274038ff, 0xef02ba28, 0x042ac007,
-	0xc48695c4, 0x63e282cb, 0x38194e18, 0x5a1dabff, 0x7562aeff, 0x35e36afc,
-	0xac30bfee, 0x0427fe60, 0x2eaa1f3c, 0x0bae5f9f, 0xe2a9cf8e, 0xba9d0b5a,
-	0x887c7c60, 0x6f8cb26f, 0x2907b6ca, 0x452d3e0e, 0x64acfde4, 0xc707cf64,
-	0xbd850cbd, 0xc3ea2d0e, 0xf7f48c15, 0x9e363f60, 0x5eff2517, 0x09cf6305,
-	0x7d5ade74, 0x59e9e4df, 0x1cfbf8e7, 0x8fd8e52d, 0x50c3532d, 0xafbe0e3f,
-	0xf09bc4a0, 0x7de04c98, 0x22dde569, 0xe10d62cb, 0x53b77cc7, 0x8797e2b9,
-	0x4b12a6fa, 0x55eeb9c0, 0xdd3ea06c, 0x1e85f2a3, 0x59d6d6f7, 0x1c4fef14,
-	0x82ec29ef, 0xa33b24a2, 0x66aa4879, 0x3cc00764, 0x86fae2a8, 0xce345d94,
-	0xc58c354b, 0xaaa038f2, 0x7076013c, 0xbf184fa4, 0xe30fce2a, 0x76c1c154,
-	0x4deccde7, 0x0de64a43, 0xfccdf9e5, 0x5e39068d, 0x646e46f8, 0x633be91c,
-	0x77d418d8, 0xa69f8b2c, 0xeb04b8f5, 0x34597e81, 0x03c54284, 0x68fb4337,
-	0x5f90ba07, 0xc4dfd1e2, 0x30caef54, 0xc9f74887, 0xb38e6284, 0xf1e4eb10,
-	0xfc467ce1, 0x9507086d, 0x9859f80b, 0xbce0706c, 0xc3000c1b, 0x333d0590,
-	0x56be4026, 0x15af37f6, 0x33308898, 0x4fdc8ddb, 0xe36bbca8, 0x866d77a7,
-	0xff7407eb, 0xcfec30be, 0xfa53bfc7, 0xdb8ef219, 0xfb27be0d, 0x7dfc1ccd,
-	0x951df919, 0xff9b87fe, 0xfb6ddee1, 0x2777d4c3, 0x3267bf70, 0x20e56bd1,
-	0x4cbc12bd, 0x1efc47a6, 0x4abdc2e5, 0x0c77adb1, 0xfb3c37de, 0xfd1d8470,
-	0xf0e303e0, 0xefe5a9dd, 0xed75fdd1, 0x9361e00d, 0x8c0fbe48, 0xafef6e4b,
-	0x02fd171d, 0xbc06dae4, 0x4fe78434, 0x279d192a, 0xcf4ab8b0, 0x000e7489,
-	0x1392a0c6, 0x4013ef01, 0xf10e1b7b, 0xf15baf73, 0xb0710b9d, 0xd02bd45f,
-	0x4255b06e, 0x483b087e, 0xbf19ab49, 0xd5e0ac1f, 0x1a3d07a8, 0xf5c352e9,
-	0x3ea6d9e8, 0xe935cf11, 0xe445fae2, 0x2e68e71f, 0x37e807c7, 0x0bf9d19e,
-	0xce7c926d, 0xdfc4a471, 0xfbe4cb4d, 0x84cfd29b, 0xfe591ad1, 0x47fbd2f7,
-	0xd54e23b3, 0xf2c6764b, 0x442fc5f6, 0x11ecfcff, 0x00d3eaa7, 0xe167d82e,
-	0x2ba9d270, 0xecc66669, 0xd10bacfb, 0xef3b3f9f, 0x807495d4, 0x78d9f68b,
-	0x464614f9, 0x097df8ce, 0x319fd10b, 0xd559b461, 0xd7385bfe, 0xd53cdff1,
-	0xcf21341a, 0x5a36df63, 0xe8c94f39, 0xf3b3ad3e, 0x2e31a797, 0x47f654e9,
-	0xdf482e87, 0xde0b2281, 0x717f9323, 0x9d0f1451, 0x9dd9d329, 0x1452eef8,
-	0x68bb2dfa, 0xfa0d477e, 0x6bfe9fe9, 0x4382f4fc, 0xccca9779, 0x1bff812a,
-	0x2c2b981b, 0x99ee8023, 0x9f9d7343, 0x81b8a603, 0xffd28f82, 0x6960bc10,
-	0xbc4098c5, 0x0a3b51b6, 0x0d0a175e, 0xc70587a4, 0xfd082e87, 0x549cf1db,
-	0x2fd6cfc4, 0x10ba75c2, 0x002a9fd9, 0x9eb79e1c, 0x7c42edd6, 0x1ec176ff,
-	0x3af8eb00, 0xa22bef56, 0xd6a3fc75, 0x027a3d51, 0xdfc5dbbe, 0xe396686f,
-	0xbbc64f50, 0x019f687c, 0x32b9d1dd, 0xfc9e8a5f, 0x05e36548, 0xb03fa047,
-	0xcbf7346e, 0x69d3925c, 0x49cf1686, 0x01f74ba0, 0xfa85ad81, 0xf5976bee,
-	0xeecc9fa8, 0x3d47a33c, 0x19c0eeba, 0xad4bde3d, 0xa9da1843, 0x8477a6db,
-	0x32feffd2, 0x97f2ab5a, 0xd1d77629, 0xe8f5ec94, 0x16abab77, 0xeade1ee8,
-	0x6e1fb9d7, 0x251c32f5, 0xb2df7763, 0x55b8fc9f, 0x98f5eece, 0x477d652e,
-	0xc588ddf1, 0xdceaad2e, 0x089a92c0, 0xcabe3c55, 0x9782ab13, 0xc0eac0b6,
-	0x21b4bb3e, 0xc31df549, 0xef82cf5d, 0xd0fe0e28, 0xd790affe, 0x736db171,
-	0x16bbfa2f, 0xcc7ad4bb, 0x62b5ceec, 0x11ede20c, 0xfece1aec, 0x84b77e12,
-	0x00d2108f, 0x7de60abd, 0xa3d7075a, 0x648c2aea, 0x0c22549f, 0xab595af3,
-	0x7393e3f5, 0x54f45347, 0xa810eeee, 0xbb972ddc, 0x576e046b, 0xa975f2cb,
-	0x8392e38c, 0x75d1a727, 0x37a39f52, 0xa5df0033, 0x88e7e515, 0x437d651e,
-	0xc4855719, 0x290d8df5, 0xddb0e9ef, 0x5817dfa5, 0x4b8d1a6c, 0xa92d47a5,
-	0x1e55c351, 0xd59e905d, 0xbdf943a7, 0xff9d41b4, 0xbef2d1f3, 0x90f2c79e,
-	0x2d18de9f, 0x07189f88, 0xbca53fe1, 0x81ef0277, 0x0f3ad25d, 0xead67d22,
-	0xdf700abb, 0x1175a4bb, 0x7e4394ac, 0xb8afdf1d, 0xce01a2be, 0x751befc3,
-	0xa7de330e, 0x8814adf5, 0x00b0976e, 0xb06d27bd, 0xa1dac13e, 0x7722bf70,
-	0xe4f59cc3, 0x98283d0f, 0x13286f51, 0x83de221d, 0x8fc61c6f, 0x83e6517e,
-	0x1f2fac13, 0x2246caf1, 0x9eca7585, 0x99f6823f, 0xf996b7ec, 0x3d948e30,
-	0xc4bf204e, 0x4371809d, 0xc922a611, 0x37b03991, 0xad9a4184, 0xf920af6d,
-	0xe66f563e, 0x58da62ef, 0xfc70bca0, 0xbe701333, 0x0bb27510, 0xfde87b93,
-	0x9b6d39bd, 0xcc5ca22f, 0x3d1470cc, 0x193df805, 0xf27ffbc6, 0x16bfc175,
-	0x3fcba9da, 0x0ad3f246, 0xd6fd81e4, 0xda3964d9, 0x5acff6a1, 0xc121ae51,
-	0x7ea7cacc, 0x32f89413, 0xc3ed15d0, 0x9fa4a55d, 0x9f7ee558, 0xddb8942d,
-	0x2e7ca0fc, 0xe2d6f98d, 0xd1befaf9, 0xf495f28c, 0xcaabfb1b, 0x5e283104,
-	0xe61a3750, 0x4fada579, 0x5be9de75, 0xe901bf6c, 0x187db82c, 0x395e2abe,
-	0x8a2d7b4d, 0xcc1d77ee, 0xfee8deb0, 0x3ea8d694, 0x8733a4b7, 0x53bbdd07,
-	0xf6d99fcb, 0x777ba0a4, 0xeef74119, 0xddee82f2, 0x2df9efa9, 0xba094e74,
-	0xe7bea777, 0x54cdb067, 0xe6930fd5, 0x9c88e0a9, 0x23f555bb, 0xe7d5cbed,
-	0xbcff8eae, 0x77c74842, 0x2e7d7d06, 0xe0668798, 0xc198e28d, 0x0a2f247d,
-	0x3e1a432a, 0x6984cc2e, 0x0ba1a173, 0x9139a4e9, 0xe386e7db, 0xa0badb0f,
-	0x9788e31d, 0xfc6fe88c, 0x452fe089, 0x9f28c4fb, 0x18fd1953, 0xaf33ed53,
-	0x52be7015, 0x5cf2dbd2, 0x7d61f3b3, 0x494af7f2, 0xdee01dfc, 0x463eb8d1,
-	0xf9036c7c, 0xaf7e55e6, 0x476cac78, 0x5f3ced28, 0x0f353258, 0xcc7fcfbe,
-	0xece28331, 0xf07efc1d, 0xa78f3d4e, 0xe7e55ef8, 0xfa3bf35b, 0xfe008e34,
-	0xf5c7993e, 0xa59c6790, 0xeba91f14, 0xf9165d84, 0x1eaceda9, 0x75d465ef,
-	0x7ee14776, 0xab3ce056, 0x60c9bf47, 0x89cfbcbe, 0xaf68e1fd, 0x743dacff,
-	0x9e6d6d3c, 0x98e3f89e, 0x1eabd72c, 0x91bb72d6, 0xb9e16639, 0x575e4571,
-	0xabe3e7ed, 0xe7e7a85a, 0x1d1a3160, 0x9c836e42, 0xc396ab3e, 0x707ef50e,
-	0xca3d7f8b, 0xaadf900e, 0x4c174b7a, 0x12b7bb27, 0x31f236e4, 0x797573c8,
-	0x17c91372, 0x7caae790, 0x3c80de77, 0xdf0ebfcf, 0x426a769d, 0x8170f38e,
-	0xda78f348, 0xffe69535, 0xf4479819, 0x64333da7, 0xde7cf8de, 0xc65ebe6c,
-	0xb7580fb5, 0x2ebf7ae0, 0xf2f6ebe0, 0x7dfaf230, 0x0a775d79, 0x4c2845bd,
-	0xa270cedd, 0x634625db, 0x387b9e09, 0x1365f296, 0x7eaae1c6, 0xfd3dd02e,
-	0x6e3eeb7f, 0xbf5ffd41, 0xfd05a8ff, 0xa3f6ee61, 0x594db016, 0x8b5a4ead,
-	0x85d03c7a, 0xba9ef51d, 0x7fc22e8e, 0x6eb8fb65, 0x21d95fcc, 0xee3dfbd0,
-	0xd3a71703, 0x135f5938, 0x0e770bc6, 0xf28fd783, 0x37befeb8, 0x307ee24f,
-	0xfb89f417, 0xdf8301fd, 0x801d202f, 0x5ebc425c, 0x35e5f017, 0xb1a373b6,
-	0xf51e9422, 0x1f7cf26f, 0xe867a8d9, 0xef85afaf, 0x52c71c71, 0x488de98e,
-	0xb205fb47, 0x27edddb5, 0xfb604617, 0xfa863af5, 0x17df8285, 0xe21fbd29,
-	0xd6a83ff8, 0x3580a7a1, 0xbe696b56, 0x52d7a83f, 0x74fbda3b, 0xc15e2f04,
-	0xae1c55cf, 0x0929a8fe, 0x56a0fdda, 0x530c7ba0, 0x31f3fbef, 0xe0af1784,
-	0x3d305afa, 0x4c1af42b, 0x3bf4c19f, 0xbe6b4e84, 0xc91e9d19, 0xe4d5ef93,
-	0xe7dc02b1, 0x59a7dd61, 0xe11e7e91, 0xae2be3f7, 0x7fa1d61d, 0x6cc9bd33,
-	0x31e0027f, 0x0b7aff5a, 0xbcc389ca, 0x8776b0bc, 0x748de5c0, 0x5261f237,
-	0xbda19eb3, 0x971e7efb, 0x7ae3ef4b, 0xfad0e3c5, 0x31af8c05, 0xe51d37b1,
-	0x4f1c9a52, 0x2ac7457a, 0x905c53f6, 0xaf319bcb, 0x96ef54d9, 0xbd71e537,
-	0x40839143, 0xe4fdaee6, 0xc44f6d97, 0xcb2f147b, 0xe55341e7, 0xfa32b2f6,
-	0xf485cfa7, 0x672f4caa, 0xf8143c64, 0x6cff4cb2, 0x1f68cfdb, 0x59c72d9f,
-	0xd1743666, 0x833ccc79, 0x879453eb, 0xabdf52b3, 0x39ae7dc5, 0x3a7cedfd,
-	0x25378d67, 0xc9fbe226, 0xd27877fc, 0x60d6dba7, 0x9c372fdc, 0xe0ec31d6,
-	0x381e7453, 0x35bc6b2c, 0x49439c54, 0x7a2557dd, 0x6aeeb08f, 0x3c0aa53a,
-	0x7d39d0f7, 0x1701d91f, 0x5c9f13a7, 0x2ddea9b5, 0x7bc654fc, 0x5d3ef28c,
-	0x80f3f727, 0x8b8b169c, 0xf329eb06, 0x1c659e80, 0x2ed6586f, 0xab35af5a,
-	0x75a92158, 0xcefe29ec, 0x0149ed66, 0xa458bddf, 0x304ce873, 0x608defdf,
-	0xfc8b1f25, 0x3657241d, 0x748c4dc6, 0xd784fb2f, 0xd7af704c, 0xaf29f046,
-	0x61ade944, 0x687c88ce, 0x4f11e167, 0xe1dbce16, 0xde275694, 0x8ef0bc57,
-	0x336ba64e, 0xd32e2fbf, 0x2d4ee5da, 0xeb9c6233, 0xc2e3e800, 0x5cf7fe20,
-	0xddfba44d, 0xa0fec3bf, 0xbf0d959f, 0xaf677921, 0xed1d38b9, 0x33dac2a2,
-	0x1bbb084d, 0xf51d3cfe, 0xff610f89, 0xf41ebd20, 0x72809b7b, 0xd3bd24e4,
-	0x8635795d, 0xd35979da, 0xcbf91d3f, 0xf740a6f7, 0xb8ec3e6f, 0xfdf2b7a8,
-	0x7873dc89, 0xf2fd1c2f, 0xb9a3f2b3, 0xd42ce91c, 0x243afad0, 0xddeb3bd5,
-	0x0a2bffa3, 0x20d8c3d7, 0x7e0a7afd, 0xc865a3df, 0xfb4a9bbf, 0xe421cca3,
-	0xdff469ef, 0xb071f365, 0x15e5a1ec, 0x9e165f7a, 0xe990ac93, 0x3cbcb838,
-	0xa13fc07f, 0xebefca73, 0xa1fe0108, 0x3fdfc62a, 0x2ba7bb05, 0xaab8f81c,
-	0x67f92a73, 0x0dc23caa, 0xd1c333fd, 0xeb4dd7e1, 0x28cff718, 0x818dda30,
-	0x1bb44d7e, 0x1f7faa99, 0x252b077f, 0x74f786f3, 0x14897ddc, 0x666bafcf,
-	0x795aef14, 0xe7a53475, 0x2120df5f, 0xfbc318ff, 0x6b7ee95b, 0x8cec86b6,
-	0xfeb53e95, 0xcb80a533, 0x7c052985, 0x60f95cde, 0x01b0e52f, 0xa2ec097b,
-	0x5db9f37b, 0xa9887514, 0x7ce0a5ec, 0xf28c97b2, 0x13101d3d, 0xe04257ae,
-	0x6941477d, 0xca977e0d, 0xd9ce885a, 0x72fefc3b, 0xe4d738f0, 0xf8553e73,
-	0x35f2317a, 0xe7076fd2, 0xe776e0eb, 0x41ac9415, 0x4c38da3e, 0xe65cab7c,
-	0x8c6d95fb, 0x16ddcbe6, 0x05f4f343, 0x0296736b, 0x78017e5d, 0x0bd23de0,
-	0x3444674e, 0xe5c17f7c, 0x3df3c08c, 0x6ba81c8a, 0x36efa70b, 0xc58bce66,
-	0x48cda373, 0xf9ded0f7, 0x9c46a98e, 0x38da7be7, 0x7dfd29ff, 0x1638b5d8,
-	0xae8269f9, 0xf2876f5f, 0x5133cee4, 0x784df7a8, 0xf22c7e7d, 0xfe7870e1,
-	0xcf1918fd, 0x1e12c486, 0x70bd8797, 0x004f6ca2, 0xba27ee7e, 0x87fa9de8,
-	0x6fd1181a, 0x56ffabf7, 0xbe7c7c87, 0xfb8cc233, 0x230717e6, 0x0bcabde8,
-	0x3de81a6f, 0x7df95a9a, 0x7d742fd5, 0x7cbf4873, 0x22f74b5d, 0x47fe6fdd,
-	0xfba3f22b, 0x3b9d0355, 0xc373a87c, 0x6af7dc45, 0xc39c673b, 0x5f6b5677,
-	0xc3f2dbfa, 0xd25486ca, 0x3ff8148b, 0xbe2746bc, 0xe45e7bf3, 0x8ea1e272,
-	0xf77d217f, 0x0b976ba1, 0x17ca7cf0, 0x44c7ff07, 0xb7ee6b94, 0x79444f2e,
-	0xe5c5fee6, 0x7eee5889, 0x4a13c22d, 0xc05eb95f, 0x7eca3efd, 0xa8aef699,
-	0x90ad0ff2, 0x5d6d23e9, 0x3d07bd0b, 0x7b02e4e1, 0x130fbbe0, 0xac4e34b2,
-	0x65b7e13f, 0x7c05f7b1, 0xa457aeb7, 0x93f8e338, 0x01d51165, 0x814f7974,
-	0x7e2ff14e, 0x930ebf23, 0xf019c7df, 0x77f2f4e3, 0x8af6367f, 0x1aa37dfc,
-	0x83a1ee81, 0x5ee432fe, 0x8affad1a, 0x88df7a58, 0xc73bce89, 0x8b38478c,
-	0x3e6205de, 0x00ccd1e3, 0xaf71693d, 0x7400cba6, 0xe869d154, 0x57befd22,
-	0xacb0433c, 0xf173dd3f, 0x2134c8d3, 0xe7267f84, 0xe39434d4, 0xf81a7ec1,
-	0x8ade2245, 0x71e955be, 0xc1fe20a5, 0x15a59bfe, 0x287f9077, 0xd6937fd8,
-	0x8f666a2b, 0xe9dff7c7, 0xf78c2f3a, 0x8bf22369, 0xfae287a2, 0xffc1081d,
-	0x3970c66b, 0xbad5f0a6, 0x5dff1e5e, 0xcc6a5bd7, 0xe656b484, 0x9db003ab,
-	0x75fda0fa, 0xa377f39d, 0xb5dd611f, 0x60631145, 0x3bbdd6be, 0xfc813d8f,
-	0x66352e6f, 0xeed777e1, 0x1fcc2e30, 0xfee097a4, 0xf2e18ca6, 0x184f4072,
-	0x97cbdf66, 0xed5bfaf1, 0xe463397f, 0x87ff6cf3, 0x87607fef, 0xedc31d8f,
-	0x4fdc25f0, 0xe0f0edc2, 0xc791437d, 0x792ebb4a, 0x63ca879d, 0xc04877fe,
-	0xec79265e, 0xbd51231a, 0xb1b9cee4, 0xbbbf4764, 0x0d325620, 0xb4433f6d,
-	0x87f2626b, 0x71e8afb6, 0xa8e39f6e, 0x871ced11, 0x1749fb96, 0x99bef408,
-	0x9db9f7a2, 0xeee3e902, 0xeb1f9d4a, 0x2ef57829, 0x85d57ee0, 0x4c3f9d0e,
-	0x150fd418, 0xdca071fd, 0xa2b9502e, 0x637a2a4f, 0x71fb93af, 0xe5e78c17,
-	0x16b986b7, 0xd87d7ce1, 0x13f94615, 0xc67cf126, 0x0093479c, 0x813df45e,
-	0xfacbff11, 0xc1a742a4, 0xcea5e6fa, 0xd7be1b8c, 0x4fa64db3, 0x8352cf85,
-	0xbfd943f8, 0xdd39f39a, 0x1dfee1d7, 0x7ff7fb8b, 0xe0f2f4aa, 0x7eff6176,
-	0x466ff108, 0x1fbe121d, 0x19d15bff, 0x4aff3eca, 0x5efe0bd6, 0x23debf59,
-	0x72af8825, 0x7db8764e, 0x6fd64eb5, 0xce6f2b86, 0xbcfc7aff, 0xdfdf1e47,
-	0x8e779f8a, 0x9f43bff9, 0xf50bd01d, 0x4779c7a1, 0xc64fc941, 0x6b86bcc0,
-	0x739e743d, 0x1ecdf7b8, 0xb055f595, 0x7c745573, 0x41af4534, 0xc35dc8bb,
-	0xd1cd03fd, 0x7ec9afd2, 0xf7a5ae39, 0xef921e57, 0xd5783e73, 0xea2d694c,
-	0xd92e90c9, 0xd9de927b, 0xc6a3525d, 0xb77d19bf, 0x34aafdf8, 0xb157eb8a,
-	0x552bf232, 0xf19b4675, 0x7c737fbc, 0x2be431fb, 0xb4ad6edf, 0xc6feb03b,
-	0x237d72d1, 0x44d5b7f7, 0x618fdfd3, 0x95407a41, 0x57df5827, 0x645305eb,
-	0xfa70d13f, 0xc3ba2fc1, 0xd1e95cb8, 0x39d79f12, 0xd055dff9, 0xe0b97277,
-	0xbf23086e, 0x886bda09, 0x820d67d7, 0x5f3ddf1f, 0x4cfbd729, 0x13ff25ec,
-	0xcaa0d3c5, 0x2ca7ceb9, 0xd4dfb20e, 0xbb95a3f1, 0x33724b7e, 0x73148e38,
-	0x0d0b8e40, 0xd2268dc4, 0x60959079, 0xbc9fe24f, 0x5dd24b72, 0x1f80ff38,
-	0x71dc93f3, 0x9730fca8, 0xfb223e7a, 0x3cebc973, 0x7e2433fe, 0xc7933cd4,
-	0x95ddf08f, 0xa5c87e10, 0xc51d8f23, 0xb374a3bf, 0xc75d51b8, 0x3247ba49,
-	0xd208ff44, 0x518dae3b, 0x8a4719fb, 0xb23b8fdc, 0x7fa33053, 0x8f3ca46a,
-	0x9c31b77f, 0x7fe9eaf4, 0x79458ea8, 0xf9d3aca0, 0xcf5e7cb9, 0x04a5707f,
-	0x07f89bbf, 0xe3061cd1, 0xf507c5fa, 0xb0e249bf, 0xbbf09464, 0x63b408fa,
-	0x7561ffce, 0x2febce04, 0x2fbfc520, 0x3169daf1, 0x2bd23fa4, 0x0fd82dcb,
-	0xbfc80ba3, 0x45a5fb2c, 0x07230fd8, 0xdfc139fd, 0x6bbf976d, 0xfc853306,
-	0xf8f3af98, 0x6b82737e, 0xa6cfc126, 0xa61efe33, 0xffcefc83, 0xfe8d7402,
-	0x2c183ca2, 0x1a7f9fc6, 0xbc61d6ce, 0xf5de39a8, 0xb3d1f136, 0x08f9091a,
-	0x9338a7be, 0xfb44bf6f, 0xc6194e23, 0xfcf40a73, 0x0cea465d, 0xbcb46bd6,
-	0xc760098e, 0xb0093c62, 0xe6f18059, 0x53ae393c, 0x6c44ce10, 0x6b9d49ff,
-	0xf997be13, 0x5f68b764, 0x8f604c4b, 0x83bf77c5, 0x83824be3, 0x3895c5c7,
-	0x1f1f1293, 0x6024ce2e, 0xee9c053f, 0x8715b9f8, 0x25737180, 0xe7bec49e,
-	0x635720a4, 0xf7ce87b1, 0x48c8533f, 0x718b7fae, 0x21f9259e, 0xc83548e2,
-	0xd5cf2463, 0x394dc571, 0xfe9d10af, 0x3dc4f1b5, 0x1cb7d863, 0x13f3e2ff,
-	0xe8f8f78c, 0xb7b2164b, 0x51effabe, 0x5e76cfb4, 0x42f0fda6, 0x8fbe41bf,
-	0xecfdc7d0, 0x2ff23a9d, 0x2dbb005c, 0x3d9f603e, 0x3ddbcf9a, 0xe89539d4,
-	0x596f40ff, 0x2f3fd604, 0x777c6fe7, 0x48d9fcc1, 0xbd22bd97, 0xe3e78b07,
-	0xd03b0ed0, 0xbd404e2b, 0x975c5be5, 0xb1098fef, 0xd0f0c62e, 0xcbe44cef,
-	0xc05f947c, 0x07ea63e9, 0xd772fedc, 0x598a38f3, 0x72ee0b96, 0x63c1c93d,
-	0xf1411629, 0xc5435b9f, 0xa7ef5e59, 0x856aa37d, 0xbe1cf740, 0xa3a59c71,
-	0x82b7de5b, 0xd3e5d3fc, 0xe70e6e49, 0x9b880eb7, 0x15b7caab, 0x23879c0c,
-	0x815475ff, 0xe31dc699, 0xb3c12c29, 0xbff8ca87, 0x73b875c5, 0xfb3a086c,
-	0x695fdb16, 0x9fdb6eff, 0xb6ddf792, 0x6e3be6bf, 0x77de6d7f, 0xf1dee71b,
-	0xf57fe31d, 0xccff6e3b, 0xaf3f3c77, 0x73ffffe5, 0x70700300, 0x5cf83f9c,
-	0xdfbc7040, 0x1f3efc70, 0x36106d96, 0x6a4177f7, 0x42b57a8c, 0x462d5100,
-	0x0877a2ef, 0x71e24d66, 0x46658db0, 0xf0610eff, 0x5f32807c, 0x1db90b4b,
-	0xe8bfce61, 0x4e79858b, 0xc596f475, 0x126c9fa2, 0x82fd877f, 0x132acefc,
-	0x18cef4cd, 0xfbc04cd4, 0xa161cdf1, 0x7261aae3, 0x23edc37b, 0xdc9617cf,
-	0xfe9e3631, 0xfbc8436c, 0xfec82f1d, 0x23077347, 0xa51324bf, 0xafd47984,
-	0xd0fa8094, 0x3f3c2388, 0x76398baa, 0xda525e10, 0xa507b23c, 0x8b6fc434,
-	0x998def1c, 0xfe869d99, 0x0bd018e8, 0x14f81e31, 0x8e2905c6, 0x4a7aa665,
-	0xe58c1f7f, 0x31d16dfd, 0xe55bee81, 0xac4cf3f2, 0x9e2aa0f9, 0xebae8ef7,
-	0xc50265e3, 0xfe2396f3, 0xe574d2bf, 0x89934cef, 0xff37e618, 0x8ce29980,
-	0x48bd2627, 0x8956777f, 0xf331adef, 0x6ed1872a, 0x1cd63c06, 0xbbf4471c,
-	0xf7a4d0e4, 0x7733e9f1, 0x750f68a6, 0x17f1514f, 0x1dfd969c, 0x8940bf8a,
-	0xf65efd6b, 0xfe887c93, 0x221fba17, 0xab1dea51, 0x27f7b6f9, 0xfc10d8ef,
-	0xfee045bf, 0xb8afdf21, 0xde9c687f, 0x6e78119e, 0xaf3cb372, 0xdc78bacb,
-	0xecf7f142, 0xee33c793, 0x01976d11, 0x4d71d2f6, 0xcfb8f463, 0x094a6b8f,
-	0xe1c0b4c7, 0xf07de0d7, 0x35fbd5c5, 0xa285faca, 0xb2b1d6a3, 0x9fa7a31f,
-	0x12ff7ae2, 0x60ffe714, 0x30bf3f2c, 0xf1e390af, 0x0824d801, 0x1b12c9af,
-	0x711c7d51, 0x2a1b598b, 0x7605549e, 0xacb9e231, 0xccade399, 0x34975577,
-	0x7339fb15, 0xd309bfb4, 0xa9b49aa2, 0xbdaf6fe4, 0x9bfa84d8, 0x63e5dafb,
-	0x4cbf93b7, 0x713da12f, 0xefda9f4f, 0xa5a30ab6, 0xfd2784f1, 0x0cdf5a9d,
-	0x71e3ec91, 0x9fa24433, 0xb230aa98, 0x4c74635f, 0x2e78426b, 0xca8a8bd7,
-	0xcc22a6e3, 0x3e934416, 0x4523d458, 0xe83f97df, 0x51998b07, 0x74f38f1f,
-	0xe2aaf8b3, 0xcc35bb4f, 0xe7ae1af1, 0x5d5f1b5f, 0x74bbcef9, 0x971954ae,
-	0x9c4a2f32, 0xaaf8b874, 0x5dc1ce72, 0x2e75457e, 0x4ff62dc3, 0xb8e3ff47,
-	0xf2f46783, 0xfe334b39, 0xfe25611d, 0x8bf5ee3a, 0xe2557714, 0x45cf6eac,
-	0x3be1abd2, 0x0e3f7e3d, 0x06213f96, 0xf1e217df, 0x9ef157d7, 0xffef1e94,
-	0xd4bee999, 0xc5fdf21b, 0xe63f184e, 0xa1cde9bf, 0xa76bcbb4, 0x98b790f4,
-	0x45e77752, 0x387ed78a, 0x53ef1d56, 0xb49779e2, 0xd56333ce, 0x0e0923e7,
-	0xc369f78e, 0xddc6bfb9, 0x97bfa3a3, 0x48c77ee1, 0x73a4bbf2, 0xfaebdd19,
-	0x246ba4f2, 0xf1875de2, 0x38ba00b6, 0xe187b0ef, 0x9de7613b, 0xb38c30f6,
-	0xa73eeb8d, 0x752ff3c7, 0xfd1eaf62, 0x12718061, 0x1f744d1e, 0xf7cfc8b8,
-	0xdfd09676, 0x5c69bae3, 0x136fe3ac, 0xe59ffb17, 0x00210141, 0x00002101,
-	0x00088b1f, 0x00000000, 0x17b5ff00, 0x67534c5d, 0xb7b77cf4, 0x0bdf96e5,
-	0x72223f2a, 0xa29862c1, 0xa740c2dc, 0xac741631, 0x4a8a5c13, 0x66b50102,
-	0x2d09922e, 0xcbc2ccd9, 0x01893ad2, 0xb8b2c3dd, 0x26a9f364, 0x87b6e883,
-	0x6ead93fa, 0x840b0b55, 0xc3e22e25, 0x52c9719c, 0xba33330d, 0xd8dc6281,
-	0xdf39d85c, 0xd8bdb5bd, 0xa4da2cbd, 0xdf3f3d39, 0xfff9df39, 0x0730000a,
-	0xb956e7da, 0xf84ce706, 0xffc6cfa5, 0x4fa43d0f, 0xbddde38c, 0x1726eb4b,
-	0x3ebbf1c4, 0x036935c9, 0xce9c5df8, 0xf6002b94, 0x1c5ace87, 0xaccf1f04,
-	0xedfc2176, 0x4ab5dfc2, 0xd2f7803a, 0xee202d4c, 0x96a666fd, 0xd2afdef8,
-	0x4fe9027a, 0x8ed77bdb, 0x70045e97, 0x106b4196, 0xc12e55f9, 0xb8e08271,
-	0x4546fac3, 0x25c06e5c, 0x80fce938, 0xe89b34ad, 0xd9a55cc7, 0xf5f4137b,
-	0x00674539, 0xdaaf39e9, 0x09f489ac, 0x06a019bb, 0xc15c0ce9, 0x556bf624,
-	0x7fdfdb81, 0x4a4f2ad2, 0xdbf11c7a, 0xe036cc1d, 0x3c8150de, 0xf7c71e59,
-	0xfc028fd3, 0xd422666e, 0xb9e97402, 0xd77264b8, 0x3bafa8aa, 0x52816a3f,
-	0x5c5b4ca2, 0xdf5e30ab, 0x12acfd4b, 0xbefcf860, 0x170568e2, 0xa0172095,
-	0xe0373f4d, 0xb19c5bdc, 0x3d7fc010, 0x4698ca05, 0x4adf9113, 0x2a8e143f,
-	0xa769da22, 0xb6e5785f, 0x4c27f7fc, 0xcdba11ab, 0xbdc268fe, 0xc3829dda,
-	0x2eedc99a, 0x7920ce6d, 0x212fce31, 0xb74bd3a5, 0x51cc22ad, 0xf413e428,
-	0x025ac217, 0x36ada8d2, 0x0406ef6e, 0x7ca1b07e, 0xa488539b, 0x70d69da0,
-	0x6f50044a, 0xdf045395, 0xcd7b088b, 0x7c461281, 0x2be726f1, 0xbf11366f,
-	0x042aae4f, 0xcbe7e3f4, 0x09417916, 0x3464dfbf, 0xf3aa8e21, 0x3c52fed3,
-	0x953176af, 0x34ef6adc, 0x4193f1f2, 0xe3d6ee7e, 0xfc3433b2, 0x5ff72172,
-	0xcb9e0136, 0x8e38031d, 0x18f67776, 0x756eedcf, 0x3f7461de, 0x337fa0f8,
-	0x904d81ca, 0x6bde8907, 0x3b3aa394, 0x001ff18d, 0x43d62670, 0x0d41d537,
-	0xe7e1c641, 0x45d513e8, 0x582a0615, 0xbf373f11, 0xf974467e, 0xf062faf9,
-	0x5117f10c, 0xd80d567d, 0x024dbf28, 0xf5e10194, 0x9f412d92, 0x9eb9155f,
-	0xfc01650f, 0xde17d728, 0x7e30c83e, 0x915f8f7d, 0x4a6e505a, 0xd2ca97ae,
-	0x32f7b8e3, 0x401653d6, 0x036cf0f5, 0x9858fbc5, 0x794d1581, 0x28bef1f3,
-	0x6eb17d57, 0xbc4ead9c, 0x31dfe6a7, 0x3a44f9cc, 0x0d9a81d5, 0x61205f9a,
-	0x5817fcbc, 0x55ed1060, 0x491c3d35, 0xb2b9f8a3, 0xec8532d5, 0x23a50ed8,
-	0x6b126dee, 0x3c2ee118, 0x160ef840, 0xf6e7f090, 0x005b9d2b, 0xd8b754ed,
-	0x5bdc52af, 0x15aacc3a, 0x40dade88, 0x50596bf4, 0xff122937, 0xc4a97bc4,
-	0x55aa672f, 0x9eb3be21, 0x445f8df8, 0xade7aa44, 0x7865a514, 0x8d28cbb7,
-	0xeac1b37d, 0x551f500e, 0xf411a337, 0x3587476f, 0x84b5fe40, 0xce90cd9b,
-	0xbea041eb, 0xedcf5b7b, 0x328f45b7, 0x099f48a3, 0x5f916757, 0x16d3cc0b,
-	0xea356115, 0x7841c82e, 0xb005bee1, 0xb4e2bc1f, 0x73b94645, 0x05ac4c3e,
-	0xc49f4be0, 0x8327c861, 0xd7c03963, 0xc30e7cbe, 0x2fd3853e, 0x8c39cafa,
-	0x470e54f8, 0xa8356b7c, 0x959e3cca, 0xdd02fbe1, 0x7059a727, 0x7e6f9b25,
-	0xf9623ebd, 0x29ef0baa, 0xba3e7ba6, 0x93962eea, 0x5a20c7c8, 0x6ad6142c,
-	0x6730c9fd, 0x06c3e75e, 0xe881e3b2, 0x60a73a61, 0x460d61be, 0xef308421,
-	0xaa6febbf, 0xd96f9b52, 0xf193b802, 0x04faf467, 0x3cd02287, 0xfad24b7a,
-	0x5fc5787f, 0x48529e3c, 0xf31eb2b9, 0x413719e6, 0xd48fd20a, 0xbe7f736b,
-	0x4f18eb9e, 0xc0ddb8c0, 0xcf9c1278, 0xcbf8b56f, 0x74ad1f28, 0xa7e7248f,
-	0x0ac4faf4, 0xb432bb30, 0x4fbc329c, 0x600e6c47, 0x8f30b220, 0x4916211d,
-	0x19df3ec5, 0x244774de, 0x96e0c3d8, 0xd73c7e71, 0x46e6d87d, 0xb6f389a5,
-	0xf9268d33, 0xd54a5c13, 0x34592ce2, 0xf6d56fd8, 0x8b5d935a, 0xb56e0c73,
-	0x9471756b, 0xfbeb059a, 0x381679e8, 0xa9e7fd88, 0x734ebb18, 0xd001cf2c,
-	0x93c7c38b, 0xd1311e9f, 0xef990f3c, 0xd8e3993d, 0x0c8a791f, 0x3794391d,
-	0x41f6260c, 0x24077e81, 0x63946dc0, 0x6e611c91, 0x192dca25, 0x9f7d259f,
-	0x2f6e15d8, 0x01905777, 0xfe0450ba, 0x465f3483, 0x1a77502d, 0x639d77ed,
-	0x3bfa9070, 0xf70502e0, 0x1bf1e8fd, 0xdd214f87, 0xb4c98e73, 0x5783ba8e,
-	0x16ef9ef9, 0x78ff7827, 0xbc2d77c2, 0x3537831e, 0x0239887a, 0x403af249,
-	0x6eed1dfb, 0x6e687f46, 0x05301f74, 0xc36ed052, 0xbdafad39, 0x41404b0e,
-	0x1de8ac7c, 0xe79df091, 0x1cd1e419, 0xa5162653, 0x1980ff11, 0xafdc2502,
-	0xfd84baa6, 0xfc855f84, 0xd8cfed8e, 0xf4c0f1fe, 0x6bd52158, 0x0a235327,
-	0x8cb73fdf, 0x922f05fb, 0xed2fdf1b, 0xcd3361a1, 0x0643dc1b, 0x868eddb9,
-	0x713f343b, 0x4be918cf, 0xf9e7df0e, 0x53af2880, 0x7e062fdc, 0xe1633d8d,
-	0x58092c6d, 0x38731509, 0xca5536cf, 0x6eaddf3c, 0x1f18dcc6, 0x91757049,
-	0xc991709f, 0xc7e76f34, 0xf5aed1ab, 0x419fa341, 0xc877e62f, 0xd0c7d5a2,
-	0xa3f0163a, 0x94a2237c, 0x7b8ba1f7, 0x1cfd0cfc, 0x40aa62aa, 0x8c2120f1,
-	0x3e3d16c7, 0x6e1f802f, 0x70a9fc4b, 0xe01aae6c, 0x2b61ac35, 0x5ea353d6,
-	0x6e01000f, 0xd4e3f9a7, 0x8e23bd08, 0x2af9839a, 0xf9f8977f, 0xe055677d,
-	0xe814d4fc, 0x6bafd649, 0x6ab375ec, 0xf33dc90d, 0x7b2ed3f7, 0x47d3f792,
-	0x3b2276f8, 0x244ced7b, 0x2bbe30bf, 0x15efbfa9, 0x411ccb5d, 0xb5c981f4,
-	0x5975ce8f, 0xbea9ab22, 0x1cdc981f, 0xee91f18f, 0x8b82fda1, 0x91f516ef,
-	0x87cf8c00, 0xcc67e523, 0xa2769794, 0x125beec7, 0xe9b8e397, 0x0aa1fc69,
-	0xa1efdacf, 0xfda79aca, 0x17fa867e, 0x7f57cfab, 0x1dbcb26e, 0xa497f9a2,
-	0xe7d27e7e, 0x9912c01f, 0x3893cbf7, 0x6487b683, 0xaa3c75e0, 0xa67ef5ef,
-	0xc87b48fc, 0x06199dff, 0xed5cf895, 0x7ff4d0cf, 0xc18beba6, 0x9bf61d51,
-	0xf6f9b935, 0xfc39f427, 0x8a71c98b, 0xa4f2bdee, 0xdf824a00, 0xa0a982ab,
-	0x195df824, 0xf6e031ca, 0x7c8362c8, 0x81a978f5, 0xc2b1335f, 0xbd735fc0,
-	0x14bf80ca, 0x5f90675d, 0x01bd6bff, 0xc5bd30df, 0xcff1bf20, 0xd63c066d,
-	0xb95875bf, 0x4936e789, 0x0ae41baf, 0x157e8d3b, 0x2afd18f5, 0x15fa35ee,
-	0x37e25bd3, 0xdfacb7fa, 0xf64e5fe8, 0xde855c83, 0x91fcffa1, 0x2060fb49,
-	0x34f3c33c, 0x13029d35, 0xa8c44734, 0x66c21fb6, 0xf0a617be, 0x84a2e2ff,
-	0xd7a72c3c, 0x0919da3f, 0xb9d2b32f, 0x2b369d0f, 0x512edbbd, 0xfe3e600d,
-	0x2e76d705, 0x000ee017, 0x00000000
-};
-
-static const u32 csem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0xe3e3ff00, 0x51f86066, 0xb8d3c10f, 0x72361818,
-	0x0143f821, 0x684333b7, 0x0606163e, 0xc77e2001, 0x9ef0c0c8, 0x38330491,
-	0x207eec10, 0x27880abb, 0x7dcf5071, 0xe52f1143, 0x5f5d9fa1, 0x153d76a0,
-	0x837f7818, 0x031083b0, 0x03309b83, 0x8408b483, 0x55045fbf, 0xc10851de,
-	0x99412e7e, 0xfa819f5d, 0xbbeb8d01, 0x00038031, 0x00000000
-};
-
-static const u32 csem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd5547c0b, 0x733ef7b5, 0x9993331e,
-	0x420f264c, 0x084f0042, 0x21842a20, 0x38880840, 0x8d069009, 0x8808089a,
-	0x420100ca, 0xa9113248, 0x676d5e97, 0x6ad11422, 0xa36d2d1b, 0x4101da97,
-	0x180d45a3, 0x1d0340e8, 0x5abc414c, 0x5b4a0a8d, 0x3c3141b5, 0xe878490a,
-	0xef5bd6c5, 0x33ef6b5e, 0x42667399, 0xfddfb6a2, 0x7f17dfbe, 0xecfb36fe,
-	0x7b5ef673, 0x7b5affad, 0x231fb5ed, 0xd313c659, 0x057c8415, 0x7213d77f,
-	0xf4842448, 0x0b3b4eeb, 0x108e3a68, 0xb0398e7f, 0xb4242055, 0x24edefef,
-	0x4db39085, 0x267355b3, 0x98c7fb21, 0xf2d3d743, 0x80fc81b3, 0xdd4f9699,
-	0xd121c479, 0x514ed57c, 0x3ed37282, 0xb1df7e2b, 0xde400851, 0xf1fd6e6b,
-	0xb5df34b5, 0x699b2453, 0x376424d5, 0xda425491, 0xa9fd842d, 0x6a5f98f1,
-	0x4daad965, 0xf682effb, 0x626683ca, 0x37b7dfa5, 0xafc86e89, 0x08042adc,
-	0xf76aaf6d, 0x5a00ca83, 0xd080b2df, 0x7e695568, 0x1a8a63eb, 0xfb03c84f,
-	0xb368ecfe, 0x67da7213, 0xfd82aa21, 0x491c6f28, 0x7b604548, 0x7dfa00e1,
-	0x65c136c5, 0x6c57f5a2, 0xf401d73c, 0xc3c93455, 0x8adf5a44, 0x47511b06,
-	0x22bfb6b0, 0x07cb5ed0, 0x794eded8, 0xfe57b428, 0x110a3de5, 0x1bb29fa1,
-	0x74a2abbe, 0x76b5bf40, 0xb1eafb4f, 0x559f8d3d, 0xe8f6d1cf, 0x0a2fd57b,
-	0xb562e82e, 0x8e807889, 0xb9d6dd8e, 0x7fa1db4f, 0xf8f0cab5, 0xdc2c7ec8,
-	0x08a8fd05, 0xed0a526c, 0x6526df40, 0xfaeec8e9, 0x87fc3456, 0xacfabe9e,
-	0x72889efe, 0x47da7a63, 0x3bbc3a59, 0xbb88415f, 0xa44bd691, 0xaa3a5280,
-	0x4207f9fb, 0xa1e32122, 0x96a8917e, 0xe4a9faee, 0x23fe0711, 0x0f949ff4,
-	0x81f1bdfe, 0x72dd99ad, 0x9904e95b, 0xbcedcb75, 0xea51cb93, 0x5fac8dca,
-	0xf20c7f4b, 0xf9d4f4a0, 0xee3e989c, 0x8374c34b, 0xfdbe454f, 0xd30237dc,
-	0x9f0b9f7a, 0xc3cbe93f, 0x8dcfa374, 0x22be53e9, 0x12be034c, 0x6fb36f7c,
-	0x7c5ba62e, 0x8cfe7c1e, 0x06d31caf, 0x7f3e0d5f, 0xd31ab7de, 0x3e3f3e6d,
-	0x1eb7d17f, 0x1d5f46d3, 0x5e403ba6, 0x05f26d34, 0xbe5dbdf0, 0xbe834c06,
-	0xc7be7c46, 0x11f4c417, 0x64c747ce, 0x3e512f92, 0x49c4dc38, 0x8a924ec5,
-	0xcd32f9dd, 0x7cb09527, 0x7cfe1dea, 0x3d53e685, 0x32f94f34, 0x6f9432a0,
-	0x3501f9a6, 0xfdf07cac, 0xf342c0a4, 0x7cacfd83, 0x02ee23c8, 0xa90fcd2b,
-	0x37c3e563, 0x68e20bfa, 0x9580787e, 0x542dbd5f, 0xabf9a360, 0x7679591b,
-	0xa76a9933, 0xcb10ecf9, 0x9ee1bce7, 0x39f34f1a, 0xfb9f2cad, 0x83aa7f81,
-	0xd8db73e6, 0x04ce93f7, 0x2d1ed544, 0xbab21d87, 0x6d595098, 0x4b70cff4,
-	0x515e6913, 0xca2e21ef, 0x6eadff1f, 0x43f29d29, 0xc8796376, 0x9bcb1f3f,
-	0xbf963714, 0xfcc32fe3, 0xe583d92e, 0x2c55fdc7, 0xfcb078af, 0x98bdff73,
-	0x2c7eca0f, 0x58fad4b7, 0xf963f15e, 0x58f5da80, 0x80391eff, 0x1f6b23e5,
-	0x4a3df2c3, 0x5f1fcb00, 0x1a7ba4fb, 0x3c11afcd, 0xd23c073f, 0x01649cb4,
-	0x4ad31a9e, 0x09d69e28, 0xf7e02e64, 0x8a3a0007, 0x0ae975cb, 0x3f8ee1ea,
-	0xfa0d3ee4, 0x90297f8b, 0xc3ccfa5f, 0xaffdf899, 0xd6991eb0, 0x4f5ef623,
-	0xba799bce, 0x2cde727a, 0x8069ead7, 0xfb58d6f7, 0x378ecf56, 0x79e9e927,
-	0x67ab42b3, 0xdf13d23b, 0xbce57eb7, 0xcf4f5935, 0x3d5a955b, 0xc49e907b,
-	0x74d3d1be, 0xa69fcf44, 0xb4fe6123, 0xfafd3d20, 0xf7b8cf46, 0xf719fcf4,
-	0x6f3f985e, 0x7de93d60, 0x3de9a7ab, 0xde9a7f3d, 0x08e7f30b, 0xdf506bf6,
-	0x7dee35fa, 0xbdc67f3d, 0x47cfe61f, 0xdf664f48, 0xa1f5d9ea, 0x3ebb3f9e,
-	0x04e7f30c, 0x6fac33d6, 0x48fdcafd, 0x8fdc9fcf, 0xc2e9fcc2, 0x5beaae7a,
-	0xd23ebb3d, 0x47d767f3, 0x817cfe61, 0x5bea8cf5, 0xa2ff72bf, 0x5fee4fe7,
-	0x0931fcc2, 0xbe98cf50, 0x54fc13d1, 0xa7e09fcf, 0xb0d8fe61, 0xa37df19e,
-	0xcf5daf27, 0x30f6bc9f, 0x9004527f, 0xd5bec4fb, 0xf3d76c13, 0xe61ed827,
-	0xe7ac20cf, 0x2bf5beba, 0x3f9e84ef, 0xfcc22779, 0xcafd8e19, 0xf40f7aa7,
-	0x7c4f5a10, 0x39ecf5cf, 0x9ecfe7ab, 0x8cfe61b3, 0xd3a67ac6, 0xaf7ab27a,
-	0x9e875267, 0xc23a933f, 0x7ac3c9fc, 0x9eadf466, 0xfe7a1d3d, 0xf308e9ec,
-	0x73f91f27, 0x35fadf53, 0x9fcf53a9, 0x3f8c9d49, 0x4cd70f63, 0x3a72d075,
-	0xfa44ba16, 0xdc67b5c9, 0x45e6816e, 0x4e8bcb27, 0x44bf0117, 0xd20dfcd4,
-	0xf7e916ea, 0x39896df6, 0xbf48930f, 0xfa14a0a3, 0xb1bd4f15, 0x2123bf48,
-	0xe7e74e2f, 0x7493ba24, 0x01a2e4f9, 0x95fbf7ba, 0xf795d10c, 0xaeb57b9f,
-	0xa393dd3c, 0x4f9467cb, 0xa83fbdd2, 0xbf9740a6, 0xba0df562, 0xb7fd33f7,
-	0xeb59f2ea, 0x3fbdd76f, 0xae916eac, 0x0afacafc, 0x8155f95d, 0x35fcba95,
-	0x7baeff0d, 0x03e3547f, 0xc1d1f2ba, 0x63e57587, 0xf2eb8f42, 0xa93d0f63,
-	0xeb7c7f7b, 0x84f95d66, 0xcaebcfa3, 0xd0edb627, 0xb93dafe5, 0xd9e7e0c7,
-	0xf0d7ed9d, 0x27b808bc, 0x574fefcc, 0xc50bdfd0, 0x0657982b, 0xdf8fd1d8,
-	0x3d54bf1f, 0xbcabe54e, 0xa14d58b2, 0x129905f2, 0x0fe7ae3a, 0x8db2bf28,
-	0x9277bf3e, 0x7d274ae7, 0x19e2af7e, 0x9fe18ced, 0x24083c52, 0x04d5520d,
-	0x41fcb1a9, 0x20b1e199, 0xc7e1cbe3, 0x535ef7e8, 0x9a44f0d7, 0xd7e62fef,
-	0x129e5e03, 0x38d3884c, 0x7bc0d491, 0xf3826671, 0x73330782, 0xe047f69f,
-	0xaa20fd75, 0xbd774287, 0x1a4f65eb, 0x6b9b19f8, 0x1f83f6df, 0xed106eb2,
-	0x9e4200d7, 0xf90ede16, 0x07efd287, 0xd0f34d2d, 0xf50accfa, 0x57db23d3,
-	0xb123fb68, 0xff6806fd, 0x37da1ec5, 0xb5d3c90f, 0xae5c196f, 0xd0a2df6b,
-	0x1fd49df6, 0x6f23fda8, 0x12610a9f, 0x7f0b2f21, 0x83cdf6c4, 0x07fdb1cb,
-	0x895f3a15, 0xdc2e3f6c, 0x77f4107e, 0x3e3fb41f, 0x4c87ff46, 0x707ff7d2,
-	0x0affbe85, 0xb52bffeb, 0x71fb78c7, 0xe116ffd8, 0xe0ffeb18, 0x337fd60a,
-	0xbedc37ab, 0x43ffcc23, 0x7b37ffd0, 0x64d67fea, 0xa8afff7d, 0xccdff7d4,
-	0xf6a77fda, 0x8edf6f14, 0x9c2bbfed, 0xa2bffd62, 0xcc57db12, 0x47e0171e,
-	0x09ab88c9, 0x40c9f6d0, 0x03fa986a, 0x903b685c, 0xa0a2488e, 0x6151e426,
-	0x6f71d208, 0xe7dbc31c, 0x686f1471, 0x9cf8fc6f, 0xcb65a804, 0x8e2ef3a5,
-	0xf2db15f5, 0x584bb015, 0x4b2be74e, 0x4165a938, 0x364df111, 0x28c30398,
-	0xd1411dbd, 0x0db2f90f, 0xfec005d7, 0x4164cd79, 0x91277c09, 0xf4ff3c10,
-	0x4736a367, 0x2e98cbf6, 0xdbdb93a9, 0x3c2df422, 0x23202a8f, 0xd37d286a,
-	0xbbe30401, 0x79d31ff3, 0x8bf3a110, 0x833ce80f, 0x227e4850, 0xa23ef6b3,
-	0xb7c825f3, 0x9412f9d1, 0xdf8b5213, 0xa70eead1, 0x384bfa51, 0x4c4b1ffd,
-	0x43be3f5f, 0x7ea9f808, 0x31bdfe7e, 0xb05d4f38, 0xde9946da, 0x7f42c74d,
-	0xfb4f2eb2, 0x753907e5, 0x360736ed, 0x155fc80b, 0xaa8a55f8, 0xf5e2c849,
-	0xddd79419, 0xc54fbfef, 0x7f594e9e, 0xfdcb711b, 0xae77fbe9, 0x69390612,
-	0xe6ddb3bb, 0xb84e361c, 0xd7a84c33, 0x4794c324, 0x634dadc8, 0x29035a64,
-	0xb71fcb75, 0xb33bb445, 0x5d9f9f48, 0xc877cfa2, 0xe944d96e, 0xc81528ea,
-	0x9cef5a26, 0xad72fab9, 0x8929bb1d, 0x57b799c9, 0x9be8ca92, 0x3c0e6903,
-	0xe79ca276, 0x1ab7d93a, 0x32c5de3d, 0x3c82c29d, 0xc808fdfd, 0xef829fd5,
-	0xfd64eedd, 0x573bd236, 0x684bb8b6, 0x142ee73f, 0x236f8003, 0x67da7ffd,
-	0x69b29b73, 0x32a7feba, 0xc7f74531, 0x8f3cff48, 0x328d3fb1, 0xcbf3c38c,
-	0x6e19cf8d, 0x3ffcb9da, 0xf4d07c06, 0xd283e004, 0xa3e39c7f, 0x7c32aedb,
-	0x9b9ecd78, 0x4f5d0f01, 0xcae50488, 0xc71b72f1, 0x3d3a92cb, 0xc8f1082e,
-	0x7365c720, 0x23879c85, 0xe3873070, 0x1ebd5960, 0xbf127737, 0x2e431e9c,
-	0xfa6c36f3, 0xdd1a9a61, 0x6e390fbf, 0x1fb23fe6, 0x4fdd13f9, 0xb8bba726,
-	0xd1acee9c, 0xe5c6df97, 0xeb97277a, 0x0ec7fadc, 0x6e41f350, 0xe8320357,
-	0x4d3ef7bb, 0x793a6d9e, 0x8d3cb87a, 0xe5c5de74, 0x98f7d779, 0xb6f48d3c,
-	0xd5b67971, 0x90c9905f, 0xf48d7a68, 0xd51d582d, 0xb9e4051f, 0x9e5b1fd0,
-	0xf27e60de, 0x55e788f1, 0x8f92338d, 0x8ad9e847, 0x7e5d5286, 0xee9e6079,
-	0x0bf565fd, 0xea4be575, 0x17caeb96, 0x975bbfaf, 0x9effe85f, 0xab05fdee,
-	0x77e5756b, 0x2ba43cd6, 0x98fe5f9f, 0xf3cf3f2e, 0x39fdee84, 0xcae93773,
-	0xa73c9767, 0xb4599f2b, 0x752f975d, 0x6fbdd6ef, 0x2dd577da, 0x8e37cf80,
-	0x89fc0488, 0x30275ccf, 0x4b99f82e, 0xc73bc176, 0xbae22a7d, 0xd30237dd,
-	0xe2173e93, 0x0f2fb4fe, 0x8b608ed3, 0x3a09c61d, 0x89252e2e, 0x6e9bccd4,
-	0x103f5dae, 0xe38269c6, 0xacd316e9, 0x4264ff5a, 0x91526d7e, 0x0af5c5df,
-	0x44258d09, 0xd386c180, 0x944625d1, 0x5e52f5b7, 0x727f0d4f, 0x5b717974,
-	0xc7dee7ec, 0x8ce15e17, 0xd6e97711, 0x7e019253, 0xbbf7274f, 0x0295e58d,
-	0x4e7c8929, 0xd7a803c8, 0x5bb8f8e7, 0xaffd30a9, 0x405e91dc, 0x0d0f901c,
-	0x7b5cb9af, 0xfde4148d, 0x3a592701, 0x7f565e3d, 0x13bece8d, 0x03f6ca88,
-	0x3dd58dbc, 0xad70d15f, 0xfb33bbee, 0x1abba445, 0x1844c56c, 0x375e4b16,
-	0xb50e1d81, 0x0a399e0c, 0x61bf74e8, 0xd82a7182, 0x33c2fd0f, 0xe3e4a2be,
-	0x04afc812, 0xb9be93d3, 0x3cfbb698, 0x95f71e98, 0xafb1fa63, 0xdf36d306,
-	0xf23f4c6a, 0xc0fd31f9, 0x3fd31eb7, 0x3d30eaf9, 0xf4c7abea, 0xd3005f3d,
-	0x4c06bec3, 0x6235f1df, 0x620beada, 0x6373e1da, 0x6f5de9aa, 0xc7c93bb8,
-	0xbf80d3e1, 0x78eb3818, 0xfaed5560, 0x3b38ddc9, 0xd6afba6f, 0xcf9bb03f,
-	0x8e66f5c5, 0x1e1d5487, 0x336080be, 0xf297ace2, 0xb0e3997a, 0x9763efa7,
-	0x6bff377b, 0xc4de36f0, 0x8a6fccfc, 0x653c6eb7, 0xd594f018, 0x89fa9e1b,
-	0x34f1bbe3, 0x7e64e4de, 0x8fd3c70f, 0xe6311fa0, 0x84e00515, 0xd7f08bf4,
-	0xa71636dc, 0xd409ebe6, 0x6a716553, 0xfa1af6de, 0x75fa2b6e, 0x6e301181,
-	0xb7f11f9c, 0x3f8710e1, 0x274cd47f, 0xcff73d7d, 0xf99e9388, 0xcdf9c6ee,
-	0xbc1d00d2, 0x5b9746c6, 0xad5f18e3, 0xe8445226, 0xb0d0f6b8, 0x468b5c67,
-	0x49225e62, 0x55c07df0, 0x5ea31f1a, 0x7f032bea, 0x9aebe37b, 0xa1b3cff8,
-	0xff27f6be, 0x78e90b9e, 0xe397f313, 0xdbf4445a, 0x1769e849, 0x2e3c37f0,
-	0x10695d99, 0xa61aeedf, 0x086fd138, 0xf3fcf5d8, 0x376e7cd3, 0x3ca21eff,
-	0xb771c56a, 0x37f90d2e, 0xe9e1f3f4, 0x6f5fe07d, 0x7e37bdf6, 0xf80c0a2e,
-	0x37b3f097, 0x5d9bd8fb, 0xc5f56e24, 0xe77fed20, 0x0f3951be, 0x870760ab,
-	0x0f5a79b0, 0xa5d6d6fc, 0xff7cf48c, 0x33b8e26b, 0xeb71c355, 0xf9db4260,
-	0xf9cbeb88, 0x40132ba6, 0x9c1eb42e, 0xe4ed741f, 0x722f7e7e, 0xafa99b3d,
-	0x2fac6bcf, 0x68c22141, 0xa2bc6eda, 0x6a420490, 0x22a3cf44, 0x6d5c6fce,
-	0xec1b887e, 0xa8d6b9b3, 0xfd3c6f30, 0x1a854866, 0xf385f1f5, 0xc0769e87,
-	0x9a656c3c, 0x863c79c9, 0xaab4b51c, 0x8f69d331, 0xf504af9c, 0x4275f3f9,
-	0xe7ce2351, 0xa35984d4, 0x3a719c60, 0xbb050f8f, 0x56a9869f, 0xc534cacf,
-	0xddda9c79, 0x09590dd3, 0x6017fe6c, 0x225b64f6, 0x3ed39bda, 0xcfffbe0b,
-	0x7aa7a7a6, 0x69087a34, 0xc0589f22, 0xacb2d39e, 0x51efdf9e, 0x0a8ba41f,
-	0xb34937c4, 0x37cc39fc, 0xaffff4ad, 0x12bd4086, 0xbd7ab5e6, 0x3cdfa28d,
-	0xd36f9e1a, 0x53bf47b5, 0xf857b5b5, 0x93bd67ae, 0x7b86bb48, 0xf957bf2a,
-	0x068af0fa, 0xc7ef53ab, 0xdef2ea26, 0xe753ba60, 0xc03fc2d7, 0x2411af71,
-	0x87255fc0, 0x5f64a75f, 0x0cda780f, 0xbf9843c1, 0x2abdec08, 0x51e29b4b,
-	0x015a5d51, 0x34f28b9f, 0xfe73abfc, 0xa9d4ed4c, 0x7a0265d7, 0x54a4be46,
-	0x20a9f2e5, 0x4c44cde2, 0xbf98bf34, 0x4569a8bd, 0xa75b8c31, 0x50fe6c4c,
-	0x301c4a46, 0x75272e3f, 0x3d4f10b9, 0xa0454c4b, 0x3bc9679f, 0xfa11b18e,
-	0xb0544e78, 0xf5ebc5d2, 0xdf9d3c7e, 0xeacbf2eb, 0xe4a5f9f5, 0x075854d6,
-	0x2641ba5f, 0x86ec0101, 0xe898fcbe, 0x91977ac4, 0x6e30759a, 0xbbc79cff,
-	0x94893916, 0xfaabe941, 0x17732fcd, 0x892e3a52, 0xd6d5fc6c, 0x31279771,
-	0x05662bfa, 0xff7d3714, 0xb7b1a693, 0xbf440b51, 0x7583ac0f, 0x71297f6d,
-	0xf2d1256d, 0x1bf4bafb, 0x81fcd5e9, 0x4e64f5a8, 0xe0834a47, 0x63b0c40e,
-	0x3d30248a, 0x6aeef6e3, 0x838ba9c9, 0x223e42e4, 0xf18df20e, 0x78744294,
-	0x067a2cda, 0x7e19e34b, 0xd4820f00, 0x4dbe78a5, 0xf55169fd, 0xfbf52d5f,
-	0x903fd627, 0xabab9fd6, 0x4a9ff73f, 0xfa28d0ff, 0x5fd5620b, 0x76179bf5,
-	0xa93da9f9, 0x0e67e978, 0x53c9c742, 0x8baa5d52, 0xeb72b5ca, 0x9a6e1d0f,
-	0x0efc949e, 0x80a9ebc0, 0xde4b1458, 0x76f2c3ab, 0xbb8805db, 0xfd693fc1,
-	0x11ff9fa7, 0xdf3e23c6, 0x9e313b2a, 0x990e60d6, 0x37563ea9, 0xd9262f2d,
-	0xf2c63f98, 0x21139e0f, 0xafe3d41f, 0xa59fd9e2, 0x8a0afec2, 0x0a5f1e14,
-	0xbd5b3fa1, 0x1c42d3e5, 0xea17489f, 0x683bf191, 0xda1252ff, 0x424a85bf,
-	0x13a53974, 0xce5e04e3, 0x8fd36f17, 0xf80e89ce, 0xdfce1b57, 0x7397ef8d,
-	0x14b974ff, 0xa36ed29f, 0x26409eff, 0xf8d43d80, 0x3fcc0241, 0x2fdcf35d,
-	0x7a518fb2, 0xdd796cce, 0x49f04421, 0x8df3a3d3, 0x47b57f8b, 0x76ded9ed,
-	0xf48b3d50, 0x4af1b483, 0xbabf720d, 0x7295a599, 0xd52d71c8, 0xb24dcafb,
-	0x571f4fcb, 0x33f4f0be, 0xf31c424f, 0x30d7668f, 0x178aff5a, 0x8937bc0e,
-	0x976c57e6, 0x37598a53, 0xb76a42ec, 0xfff4bc5c, 0x72dd39d5, 0x80f978a8,
-	0xcf628ea2, 0x96ea4fef, 0xfbed8ac7, 0x9a2a3215, 0xf71b531f, 0x18f66d2b,
-	0x563c6972, 0x9ac27e08, 0x814bfee7, 0x7da9e2f8, 0x199fe902, 0x0e9b9f83,
-	0x7c001fa0, 0x39723942, 0x7866e585, 0x02e54bdf, 0x93935af6, 0x6e46fcb1,
-	0x753ea04f, 0xc5f9e224, 0xf2fdb43d, 0xd05d993f, 0xef17f2ff, 0x4e3f4071,
-	0xd70c3548, 0x2a61fcbf, 0xd972afd8, 0x94c4ea9f, 0xea7f2f3d, 0x65b788bb,
-	0x15377f6f, 0x9dc449e3, 0xc7b1c26e, 0x5bfd0e9f, 0xf63671b2, 0x20f1296f,
-	0x297fcaee, 0xfa680496, 0xb68a4499, 0x0e8bd0c7, 0x362717ae, 0xf68c4753,
-	0x1fcc04ef, 0x23bf5ec1, 0x422abee2, 0xffa026ee, 0xa17de5df, 0x3fe6021e,
-	0x1d3930b3, 0xaf5c4c90, 0x8919b7a8, 0xb60f2dd7, 0x0f4e7c82, 0x7587f772,
-	0xfc912f16, 0x57c21f9c, 0xedf15eb4, 0x7c99fde9, 0xf2e52a88, 0x3f38e8ef,
-	0xfbc39e15, 0x9adbb2ad, 0x7c8efbad, 0xfeddd995, 0xa53ede2a, 0xe7c60e3b,
-	0xfdb1a913, 0xa6b201d5, 0x8e9c74f7, 0x7e8457c0, 0xf2df7d33, 0x4d6fd310,
-	0x45a503df, 0x30f17e50, 0x0ef81fd3, 0x574a3fc6, 0xef963fa8, 0x3da0259f,
-	0x58e6f3a0, 0xe645bd7a, 0xd72fad7a, 0x96e94270, 0xbc088484, 0xc849fd40,
-	0x595f5c7f, 0x177e81ba, 0xd0bd2f61, 0x3eba239e, 0x71976f4d, 0xfa053ffd,
-	0xfeb74d7f, 0xef4c8d93, 0xfc9ff67b, 0x07236e2c, 0xf412799e, 0x5fa7ea95,
-	0x4b957d05, 0xdd7fdfa0, 0xeddef2d6, 0xdaff4f54, 0xdea9e9a8, 0xb4f51a7e,
-	0x1278c77c, 0x6aff4f4b, 0x7a989177, 0xd4c79f4a, 0xe21b7b53, 0xfd94fff8,
-	0x2897f8d4, 0xd9a7f9eb, 0x68f89ec3, 0x4a2f87b4, 0x68d3f22a, 0x61dfe90f,
-	0x3f8d1b92, 0xde1a770d, 0x755d7e2a, 0x309dd805, 0x85dc352e, 0x2ee1a971,
-	0xe3ab7e2a, 0xcffcb19f, 0x74a26b10, 0x4fd4b7cd, 0xa5847981, 0x2bbce08b,
-	0xeb88967f, 0x048b96a6, 0xc880bef5, 0x7df06fb8, 0xf078cd53, 0xfdfca743,
-	0x52f7b3b6, 0xbf13e77a, 0xebe5d6cc, 0xbfebf464, 0xc9abeafc, 0x73b73fb4,
-	0xeca7cefe, 0x63ca89be, 0xe28424ae, 0x24f39d28, 0x82484fe2, 0x3e40acf8,
-	0x7e63a08e, 0x7f0f3eb9, 0xebbb5253, 0xaffdede9, 0xa6f90f3b, 0xb63edbe9,
-	0xa42ef576, 0x2979b143, 0x20a54f12, 0xef3fca57, 0x04302138, 0x549b52ed,
-	0x7aaf3112, 0xb79ddb9c, 0x0f1ccda7, 0x9cfe4bfe, 0xe70c0951, 0xeb7e7183,
-	0xbcebf6e5, 0xbb004d5f, 0x0b39be7e, 0x0fe7afe7, 0xb58f8e2d, 0xe385b26f,
-	0x575f00ec, 0x750bb4e9, 0x277dc522, 0xc5ff42e9, 0xad92b76f, 0xbefdd631,
-	0xe4f89b2f, 0xfe8dcb83, 0x736e5489, 0xd1e70e39, 0x2272134f, 0xa6eb36e4,
-	0x5a239253, 0x71f7f00e, 0xdbeb3cc4, 0x0d7017f2, 0xb6b16dfc, 0x88c49615,
-	0xf384fdd7, 0x5f2bca6f, 0x69d5fee0, 0xf012f9cd, 0xd45d9a71, 0xd41e39c5,
-	0x192475f4, 0x794d7409, 0xe3a3f965, 0x87bd8e29, 0x57ec1744, 0x539f36f5,
-	0xbbe6313c, 0xfd427e46, 0x901e47e0, 0x23afc89d, 0xe012c972, 0x56d991eb,
-	0xef96eb02, 0x58aaae2a, 0xb3374e74, 0x523cc878, 0xe138d9f2, 0xe6fe3eff,
-	0x150f89cf, 0xb79c7e50, 0xd1c0fdb3, 0x7f7a63f8, 0x6a0429de, 0xc8a1c005,
-	0x004229f2, 0xc48564e2, 0x0164e8f3, 0x48fafdf5, 0x2c1f95fb, 0xd5f6017d,
-	0x4e0b3754, 0x96af2d13, 0xb1c014da, 0x025db837, 0x9546fcff, 0x20de31b8,
-	0x159a8cd5, 0x203ad711, 0x96afc84b, 0x277eddbf, 0x2cc2f7f0, 0xdcba0133,
-	0x6039cf23, 0x3cd0bfdc, 0xa7a0f516, 0x47c1fd7e, 0xa0934ca6, 0x30f8821e,
-	0xc530a1e2, 0x9ecfcba6, 0xa8ba064a, 0xdb98a6dc, 0x90c571ee, 0xe18532df,
-	0xcdf6cfac, 0x7d99fff2, 0x1bed4c9b, 0x691cb5c3, 0x512b46df, 0x2c7fadf6,
-	0x56b2b6fb, 0x58b80fed, 0x3fab37b9, 0x6be575c8, 0xb2c5fa4b, 0xd8faaf6f,
-	0xbe35fdfc, 0x2073bb0f, 0x23a36fb5, 0x6a40dbec, 0x6dc462df, 0xffcd15d3,
-	0x59bec5ec, 0xeff477fe, 0x316fb055, 0xd1523bfa, 0xe6a2b7db, 0x456fb45a,
-	0x7edd4503, 0xcf852ca8, 0x6fb47ae7, 0x1b367f0b, 0x16cbb2f3, 0x57c03f03,
-	0x71af6fb0, 0x80ed073b, 0x38a45b9d, 0xdabefdb1, 0xdabed2b9, 0x3e25ffb9,
-	0xe56e766b, 0x239e7620, 0xcecc871a, 0x7664ccad, 0x665ee56e, 0x630e56e7,
-	0xdf68ce76, 0x1beca20a, 0x047abefb, 0x8be71efd, 0x83b8bf99, 0x95cf1796,
-	0x7efa165d, 0x5f9daab1, 0x691f19a8, 0x122916ef, 0xdeca39f2, 0x39e1ceb9,
-	0xddecde90, 0x86ef605b, 0x0a1b1da2, 0xc7c4647a, 0xba6d430d, 0xbe4772fd,
-	0x4bf5ff68, 0x107f2fa0, 0xbefd9e71, 0xf68bcd89, 0x163ed17d, 0xa7376ef4,
-	0xc98551e7, 0x47e7c3b3, 0x24753a7b, 0x43aaf7d3, 0x544e3871, 0xbfac0937,
-	0x15010bf7, 0x5dbf81c6, 0x9df2f9c2, 0x797cd97b, 0x83f1998e, 0xcec89bfc,
-	0x2c16505d, 0xdcc3c08c, 0xd718154b, 0x0b112b9c, 0x0e0baff8, 0xfc0a70dd,
-	0xd69705d6, 0x00bbbfa3, 0x89bec39e, 0x32eb6ded, 0x2e77bb68, 0xa1de7017,
-	0x1798efed, 0x3f7a97b6, 0xec737e76, 0x38531a7d, 0x13ee533d, 0xa72fb002,
-	0x2f107db7, 0x239bfd72, 0xc8bf21b6, 0xf8cc625b, 0x985ef6a4, 0x97c62e4f,
-	0x6fcc55aa, 0xf289f30e, 0xf9a2154d, 0xbc5d2544, 0x2f9bb530, 0xfda4ee77,
-	0xbfb9e94d, 0xf7a2df1a, 0x3e71b8e1, 0xd7bf80b3, 0x3e341f13, 0xf39ff547,
-	0xb8a9fa9d, 0x8fc8c79f, 0x5ccecd46, 0x5e814643, 0x3cf26fbe, 0xf4701e3a,
-	0x942f949f, 0x0de6dbce, 0xd9e79dd3, 0x9372f9c5, 0x54b4d8e7, 0x6a48f815,
-	0x97b76700, 0x4a903f6f, 0x3b8b77fb, 0xe6420733, 0x78a6ffb3, 0x62d0fe20,
-	0xa83b42ed, 0xcccd30e1, 0x8e57f870, 0x9c0323c3, 0x09bc70d3, 0xafd44e0a,
-	0xf1cec190, 0xca5e647d, 0x6f5fd067, 0x144f8f90, 0x859fa09f, 0x720578da,
-	0xa9bcffa1, 0x5bc5c999, 0x6e5ca023, 0x81075d26, 0x8229d5ef, 0x2aab442b,
-	0x21ff6e0c, 0xd57ab7ec, 0x9e839f4a, 0xcdae0b97, 0xf4f61d8c, 0x963898d4,
-	0x3718e162, 0x9b8c4609, 0x24bde00b, 0xc668b7d8, 0x1efceff6, 0x3f4647b3,
-	0xf5b98a65, 0xe533d008, 0x09b264df, 0x7fe8061e, 0xfa303811, 0xf07a5131,
-	0xa4fdf735, 0x2afdfb72, 0xfc0ec1c8, 0x1fc052ee, 0xf8d886f2, 0x257b95a3,
-	0x4df21a75, 0x8e904393, 0x1c98e32f, 0xc8dfa960, 0x3cb45be7, 0x6fde1fe0,
-	0x7ef86416, 0x324f9506, 0xfa6a9a2d, 0x7786a0e2, 0x2fcd1ab3, 0x47a42788,
-	0x6fb00dd8, 0xd596eb91, 0x4f91b7c1, 0xeea2ac37, 0x27cd1a99, 0x07603e4d,
-	0x28afc72f, 0x8fee09fd, 0x9bea7fb9, 0x599a4fea, 0xacfb3faf, 0x868faf5d,
-	0x015eda38, 0x4e690aed, 0xf20fc5d4, 0xd65e6ccc, 0xce20f562, 0x5d935ebb,
-	0xfb68d59b, 0x0b971573, 0xcf2257cc, 0x0e854def, 0xd3b1bac1, 0xfad13e4a,
-	0x2ce1843d, 0xd5783c72, 0xf5f941ea, 0x5e04ff54, 0x98fe4f7f, 0xb40eff96,
-	0x5516fb07, 0xf1c67b7d, 0xf5278b48, 0x6669afd6, 0x69be3f66, 0xbe76b4bf,
-	0x9783baee, 0x4dfc62b4, 0x2cd87f5b, 0xc32e7e7a, 0xd048b8fc, 0xca5073ad,
-	0x9ff2fd71, 0xe558ff50, 0xfc43f532, 0xfcf94428, 0x31a7b6ea, 0xf9f67d5e,
-	0xfe833763, 0x48adf8ac, 0x3a9f542c, 0x1093c5b6, 0x80a207db, 0x24d1509f,
-	0x91167ae2, 0x2333b942, 0xd6420cfc, 0x14bc7e30, 0x62a7768f, 0x4c503987,
-	0xf5d8afbf, 0xddc43649, 0xf6601e3a, 0xc73cffcf, 0x1b2dbfa3, 0x242bfbd6,
-	0x946f8eb6, 0x9f1cbdcf, 0xe6db7667, 0x1a16fd82, 0x8ad779d8, 0x39b239c6,
-	0x6550ce22, 0x7b5c5996, 0x59f70db7, 0x70139ffb, 0x17d0329f, 0xdb52ce79,
-	0x39e679ff, 0x822b9766, 0xcdce0072, 0xef6c3456, 0xc5783880, 0xaffa3351,
-	0x0a7386de, 0x5f53a7f8, 0x23fd017a, 0xc5d4506f, 0x8fe2a341, 0x0cc8620d,
-	0x2aa6b3f1, 0x7f3403b4, 0xb18df30c, 0xc5bdf0e3, 0xb4bc56c9, 0xb29f9777,
-	0xcfcbc570, 0x6cdcf03a, 0xc60756eb, 0x1f2e1b21, 0x378a8fff, 0xd9743e36,
-	0x8e69e378, 0xf5995f8f, 0x21a435eb, 0x9490e319, 0x1892dcbe, 0xee308b71,
-	0x29ecf85f, 0xb33b0f58, 0x014fafe3, 0xb8ff95bd, 0xe07dd4f0, 0x3ab3ed8f,
-	0x3ef6bc61, 0x13d7047f, 0x7376efb4, 0xee78ef3d, 0xe9875c59, 0x05d9a3f8,
-	0x3dec75b5, 0x23d61831, 0x917fb63a, 0x55db710a, 0x3ce3a77b, 0xa9ced56d,
-	0x798c49fd, 0x6e029680, 0x07587d03, 0xa5abca32, 0xd03065a9, 0x1bca9679,
-	0xfc70b65c, 0xc58ab1b8, 0x371e55e3, 0xbd7b16de, 0xdc4e2a2d, 0xeb96f334,
-	0x926efc60, 0x43e92a5d, 0x9530f8bc, 0xc83ee8e3, 0x9a43db6f, 0xbf298fbd,
-	0x2a0ff0b3, 0xf20df7a7, 0xc969acfb, 0xb2849eaf, 0xe31ee4a6, 0xf03ea1c5,
-	0xdbcf5b4d, 0x6c7f7662, 0xf1d9bd06, 0x83cf8c6b, 0x835ce8dc, 0xd9f0bc74,
-	0x9cb38860, 0xc2eebb94, 0xcd7b33fd, 0x62aa2fb8, 0x3fa8fbef, 0xc6df3b1d,
-	0xd7c232f5, 0xf8483ad5, 0xf083ad8f, 0x4b779c39, 0x73338b3c, 0x5a1c43fe,
-	0x1e73e075, 0xd638666f, 0xc53dd0e2, 0x6c2dd39f, 0xceb6913f, 0xcfe5b558,
-	0xf5c4310a, 0xd3903c85, 0x8baecbb1, 0x02707c6a, 0xae44261f, 0xf38ec4a7,
-	0xb8ddd787, 0xe07e40bc, 0x4bd7857f, 0xc4207e68, 0xfbc203cf, 0xe83d8624,
-	0x61d6c4d8, 0xfbd8e43a, 0x95f5b50f, 0x4f418b14, 0x575b7d03, 0xaffe8de9,
-	0x26191fcb, 0xf9a3e39b, 0xd8cbe674, 0x45827c76, 0x61fb76f8, 0xf5a8852a,
-	0xcfac0b7f, 0x60531d37, 0x638da1fe, 0xf0cf7f5a, 0xe799f279, 0xb1ef3c45,
-	0xed05b1ae, 0x545ed1b8, 0x341f1613, 0xd3833bd2, 0xe3641d5b, 0xf11d99c4,
-	0xe7ad3b01, 0x11bb2bcc, 0x8edbd5cf, 0xdf5a7e29, 0x959786c1, 0x52fd88b6,
-	0x22044e30, 0xe2f33fe8, 0x7eb66cfe, 0xc6e5e6c4, 0x76f0e676, 0xdbb1cdbc,
-	0xa73b6ef1, 0xbf85676b, 0x77e76151, 0x69dedf2e, 0xea073dc9, 0x132add3b,
-	0xba7fbfd8, 0xc40a2c51, 0x45927f68, 0x4cf2e2d6, 0x8978e86f, 0xd9e31de7,
-	0x493146f9, 0x557aff41, 0x84d1de7c, 0x15154814, 0x6a6b14e2, 0x35d2fed9,
-	0x81a577df, 0xde24d7bc, 0x756deb86, 0x533afe06, 0xbf10f99c, 0x192b4e70,
-	0xda357007, 0x49b7449b, 0xf8aaff47, 0x1e70fea2, 0xc7f72d7f, 0xf3c2e488,
-	0xb0a3a297, 0x3a23fa08, 0x8c6b4e4d, 0x5ed905f5, 0x7c113c42, 0xf3fa9d91,
-	0xb1cbe492, 0xeda3d42a, 0xb4b4a9a3, 0xa742c41e, 0x4b0ab71b, 0xfcddec79,
-	0x77ec4e59, 0x4f3e36e7, 0x99d51370, 0xc183f6ca, 0x23b9d1b8, 0xc68c9b21,
-	0xe29b890f, 0x0b9fc6d1, 0x07eff6db, 0x41d6b47b, 0xcf5489dc, 0x31555728,
-	0x8e8dce0b, 0x805908b1, 0xfe6f73d3, 0x6d6bd696, 0xd0fe7116, 0x85f6d769,
-	0xcf4113ba, 0xdc11e46c, 0xfe5007ff, 0x4e9bb92a, 0x0240bee3, 0xdf76a4af,
-	0xb45d312b, 0xfce7bce3, 0x10071646, 0x98bfd5c9, 0x2470e2cc, 0xf1f3f400,
-	0xf3a70564, 0x7ef0a43c, 0x3ae78299, 0x72f6bd96, 0x3930886e, 0xb92bf244,
-	0xb4be7f48, 0x86c8eade, 0x77e27975, 0x9939c2b7, 0xbf5f5e32, 0x53b9fd12,
-	0xd07e7eaa, 0x4f5c25d3, 0xf0b4baff, 0x32bfd810, 0xebb452cf, 0xcfeae7fd,
-	0x59f71aa5, 0x2fb0bd21, 0x93ddea8c, 0xabbef442, 0xd6c7e6f2, 0x7a397cc1,
-	0x011915ff, 0x482ac9fb, 0xe7ce0b9c, 0x97d068ac, 0x79bb03ef, 0xd893b015,
-	0xebef172f, 0xc36dbf95, 0xdc79317f, 0x0aebf965, 0xe2dbfbc1, 0xecb2ae31,
-	0x9f68c5b5, 0xfe7a69cc, 0x7f3d555a, 0x7c8c236d, 0xde39f3d4, 0x369be7a5,
-	0xcf89ecff, 0xf3fa7909, 0x4b3e46be, 0x021bc784, 0xb5110e2c, 0x09b82dbf,
-	0xd9f236e9, 0x0b76d7c8, 0x7ce2f75f, 0x96257fa5, 0x81b26654, 0x842974ee,
-	0xa3d4617a, 0x80487b0c, 0x094a0f7f, 0xae57e2d4, 0x69efb478, 0x19423fbc,
-	0x7a06cefb, 0x2ebd0224, 0xd13823d4, 0x46de7607, 0x5bb6703e, 0x909f5841,
-	0x59e9aeaf, 0xfe94f79e, 0xfa22d8fe, 0xefc046d5, 0x762bd468, 0x0489376e,
-	0x9e8264d6, 0x6e309cba, 0x6a2cfa37, 0x9ff70499, 0x286cb510, 0xc4e27bdc,
-	0x1f7cc7f4, 0x8248e74a, 0x431b82fb, 0x3ec15317, 0xeba738fd, 0xde7bb066,
-	0xec04a425, 0x6c71cde0, 0xa798b29e, 0xdc2ab77f, 0xed7b4eae, 0x59bef87a,
-	0x785ce156, 0xcb56f367, 0x4507c830, 0x9bc47fbc, 0xb4157758, 0x332cd1df,
-	0x812ccaba, 0xd8bf1061, 0x1dbb632b, 0x7cf19365, 0x6b6fd865, 0x3a40fb66,
-	0x2c713f9b, 0x1de7b08e, 0x055e9fc1, 0x4c27acf1, 0x0c9ff7b1, 0xfdf89ab7,
-	0xfc70df35, 0x7fda8c6d, 0xf6cadc37, 0x0878fdc7, 0xe97547ed, 0x330e3e79,
-	0xcb96b87d, 0x6f4bf7f9, 0x6ceffec0, 0x47185416, 0x6e3bc50a, 0x39fb451c,
-	0xe3c488f1, 0x392e2c30, 0x9bbfbf8e, 0x1f80d2b8, 0x0223af13, 0x3fc4f3e8,
-	0x35b7dc12, 0xce2966ae, 0xa0eb7eab, 0x7586cf38, 0xb05b8a52, 0xe8ec6773,
-	0x956f8fbf, 0x9c4cb874, 0x798169e6, 0x04a384e6, 0xa384eded, 0x123cf2fa,
-	0x369db110, 0x4f6bf3fd, 0x5605f3ea, 0x49076f8e, 0xf86f7c05, 0x3aba4452,
-	0x01eb88bb, 0xd9676f5a, 0xa6efbc00, 0xda9c22f3, 0x6297e9a5, 0x7e71ac51,
-	0xf281e026, 0xe08509eb, 0x52c4f2f8, 0x5fefc63b, 0x05715a59, 0x7f9feb8c,
-	0xac4573cf, 0x7611e073, 0xafed8129, 0xe2502772, 0x0ad7ae29, 0xe975df8c,
-	0xebf63125, 0x70d6386b, 0x7d39e1ad, 0xd6279c69, 0xad0fc4be, 0x58290fcc,
-	0x6050423a, 0x204fb65e, 0x078ed7c0, 0x373d973c, 0x640f27e3, 0xe0de3d00,
-	0x2db3f405, 0x963b82cd, 0xeacab19f, 0x07bef360, 0x1fb0b5fc, 0x94aa5eef,
-	0xae7b1f60, 0xabce0377, 0x2ba0876e, 0x5ba9677c, 0x9770e788, 0x8866c858,
-	0xe9754b67, 0xee03c6b7, 0x4758cea7, 0xc4b27de9, 0x427e7284, 0xfefd2176,
-	0xbe30422a, 0x03b5e3c0, 0x229b266f, 0xc0ff23cf, 0x95b0ff9a, 0xd5b0fbd6,
-	0xf6497289, 0xdfa004b8, 0xe5ffdff5, 0xbceebd00, 0x0e394664, 0xed1ff3e0,
-	0x4f9cadbb, 0x6bdce3a3, 0x3ca4ff01, 0xe5c3f505, 0xc965a871, 0xe5012f70,
-	0x54758c7b, 0xf24d2fcd, 0xe946db50, 0xf09bb249, 0x76e22e7e, 0xdf6d4eab,
-	0x45efe119, 0x090903e8, 0x69a5f604, 0x166854f6, 0xff14f142, 0x10f62ce3,
-	0xca9233cc, 0x0929bf69, 0xf5616256, 0xc2674ab5, 0x9f71aae7, 0x2e65c53b,
-	0xb8226e1c, 0xd2360daf, 0x9d9afd42, 0xdaf3ecd5, 0x66f68244, 0x605263ed,
-	0xa367ad0d, 0xf88566d4, 0x2d5ba649, 0x4944ad80, 0xbde78a92, 0x7d339507,
-	0x32fd65b4, 0x50afec31, 0x0ff31f65, 0xf5ac4171, 0xfcc38fba, 0xfc00bcf2,
-	0xf5d43eca, 0x2e35b80a, 0x75cf6b2b, 0x79fe82c0, 0x3f706ed8, 0xbb8f90ac,
-	0xb1353f13, 0xeba102fd, 0xb69dbf71, 0x1bb4668e, 0x15de0f54, 0x953eaf41,
-	0x75cf9e08, 0xb572ffd3, 0xf611772d, 0xb9938f83, 0xf4169ac1, 0x2d91c4dd,
-	0x5f6bc780, 0xa238bbc7, 0x3784c8ec, 0xde806b3c, 0x8c3f6a6f, 0xa2131878,
-	0x33e5c8fa, 0x2a7b8552, 0x943ce19c, 0xfcf95ab7, 0x949bdb8e, 0xd1fd71d2,
-	0x3338e5af, 0x6bd357f2, 0xace7bea3, 0xb198b576, 0xc13200d6, 0xba110ed8,
-	0xc0b350e9, 0x8221bd1e, 0x4f99df7f, 0xbae942f1, 0xfc0ef417, 0x19818bf3,
-	0xcd0d9b80, 0x7e82b1df, 0xa3f1e37c, 0xb11d7e99, 0xa227fabf, 0xf6cac3a7,
-	0x0f803b87, 0xf22ffbd5, 0x728423f1, 0xea95cb0e, 0x443c6447, 0xe711bdc3,
-	0x81ac5e9a, 0xf0b2330b, 0xf9011c7c, 0x0a234288, 0x3a364cd6, 0x7f9aaf81,
-	0xcfec26bd, 0x9eb9e226, 0xded64e55, 0xcbf3591a, 0xefe8165d, 0xfe82f8aa,
-	0xf5175b97, 0x97f3a25e, 0x5e30f388, 0x67e70ba9, 0x090a4bde, 0x7e0b7f24,
-	0xb9eb6905, 0xc4a57e3a, 0x0757e0c5, 0xfff8d1e8, 0x6d93fb27, 0x6a83cfec,
-	0x25ae7f77, 0x51b6df9e, 0x4f7b90bb, 0x05c33a7d, 0x89169c39, 0xd95ebe0b,
-	0x51e77e93, 0x2dd706fd, 0x7a0d9f4a, 0xea99b13c, 0x8f5a29b1, 0xde09725d,
-	0x6bdae75b, 0xd4677b43, 0x5fbc8beb, 0x7be31b5e, 0x1199e88d, 0x5371f307,
-	0x5dc060d7, 0x8b924ab6, 0x41d9b129, 0xb6afad91, 0x91c6eb26, 0x8fddf1e8,
-	0x2ff35276, 0xf8d2bf35, 0xe4afd85e, 0xcf1686e3, 0xff148214, 0xc7f7dfb4,
-	0x5f01e679, 0xfcd938d7, 0x829a0e13, 0xab03fcbf, 0xcfa00ee7, 0x0710fb46,
-	0x42231aeb, 0x125e2c99, 0x4f5be9d2, 0xe83365fa, 0xc248634f, 0xc74fcc71,
-	0xcf4261b1, 0x4b8bf4f4, 0xab52f464, 0xc0ca7e02, 0xab1ac25c, 0x7bafb826,
-	0x47bb3660, 0xbb0e6066, 0xe3dff1f7, 0x7dcc7ad8, 0xd0dc6c71, 0x4b581fd2,
-	0xc97e81ee, 0x739bf112, 0x40dd39be, 0xef0fc42a, 0x0ddf738f, 0xb914b0fc,
-	0x4e191fb1, 0xde2812e2, 0x0146a432, 0x552437f6, 0x1b8b02aa, 0x40ee3612,
-	0x28cbeb4a, 0xdc61f356, 0x16b6a0ca, 0xcd1920e2, 0x6cf5cfb1, 0x5dbf9388,
-	0xea29abbc, 0x3886ca3c, 0x541f6fe6, 0x8b937f68, 0x709479d9, 0x0f9286dc,
-	0xbf88edfc, 0xf1db3b0d, 0xf50f5b19, 0x1b3e3227, 0x30205fe7, 0xf3c497e8,
-	0x6488543f, 0x91f9c24d, 0x99df04df, 0xb23f382c, 0xd8235711, 0x58e297cf,
-	0xe09d755c, 0x9ff90f5a, 0xb8165d48, 0xffc3476f, 0xeadf278f, 0x8e2be892,
-	0xc367ceeb, 0xc3ea959c, 0x8eaf20f3, 0xaf87e7c9, 0x0d741ec5, 0x8b737866,
-	0x9aeffdba, 0x4eb282dc, 0x8788566e, 0x78ebda44, 0x1df7e705, 0xe60b9c42,
-	0x05cb1d43, 0xe160a746, 0x7d2403e7, 0x43db869c, 0x27781c6d, 0xb7e9132e,
-	0xbc18ff11, 0xb2e2cc1f, 0xfd1a3d00, 0x86a473e1, 0x73c69e73, 0xe15969a0,
-	0xee3a4db8, 0xe0512d93, 0xbe722f8e, 0x97fe86d9, 0xdff4c1d7, 0x60fe8788,
-	0x6e732e3c, 0x15abf292, 0xae5fdbe4, 0xdb7b0449, 0x0ee3ceff, 0x0f91af90,
-	0xcc7f829d, 0xfadf5841, 0x9f731c83, 0xa5a69688, 0x7f05280d, 0x0d3d2d34,
-	0xbd79ed53, 0x07198a5d, 0xeef5cd3c, 0x9eb5e31b, 0xc3f30c58, 0xb39fd0d3,
-	0x73de779e, 0x6177baa3, 0x8e3ebc7c, 0xd15ebbf1, 0x8026a8f8, 0x5de7759e,
-	0x927eec09, 0x90ff7644, 0x8373c993, 0x492a52cf, 0xd1b9ef91, 0xdc47e91f,
-	0x1181e633, 0xad9320d8, 0xbf166b88, 0x5065ced1, 0x97e4c743, 0xb9fae8c8,
-	0xec294c6f, 0xcc6d919f, 0x30dc5d2e, 0x254bdb1d, 0x5387580f, 0x312d2ebe,
-	0x73ae20b9, 0x1c9fd176, 0x517c1470, 0xe02e6b46, 0x91e888fd, 0xd431e36d,
-	0x65b7f38d, 0x88409573, 0x9ea52a42, 0x9726241a, 0xb8eeb819, 0xff7314d0,
-	0xe6c6ddb3, 0x4e71cddf, 0x06d2d34c, 0x8d8d9697, 0x39440fcc, 0x7aa47869,
-	0xae365e98, 0xc5309cfb, 0x6fb40a47, 0x994ea7d4, 0x40dd6104, 0x9c2987b3,
-	0xd63d9aff, 0xf40521f4, 0x4b01d60c, 0xe4d47da8, 0x9abf8439, 0xfc4af18a,
-	0xfd5f9a13, 0x8e03e602, 0xded00aeb, 0x8f5ffd51, 0xd98232fa, 0xd3d82b6f,
-	0xe7653888, 0xc107f7de, 0xdf87dffa, 0xeb0f10bf, 0xba917f40, 0x9e7ec1e2,
-	0x78ddffbc, 0xe1f43738, 0x715e2cfd, 0x351e6197, 0xfaecc6c1, 0x6c92b6a3,
-	0xdf02d7e8, 0x227ae77f, 0xb3564970, 0x01e58d75, 0x5c9e70d1, 0x554f2f7f,
-	0x9ee1b263, 0x5bd63f1e, 0x32e7efc5, 0xcb92a1ca, 0x4db6f961, 0xed0a864a,
-	0x7eb6dc7b, 0xa08f6e70, 0x14d93cbd, 0x8d11f38f, 0xc6db459e, 0xfa773028,
-	0xaf99b34b, 0x6ccab77f, 0xc317705c, 0xf387967a, 0xc1e748cd, 0x6fac367d,
-	0xfed8cfc9, 0xadb48594, 0x7abed4d5, 0x0b79d99a, 0x7c963f63, 0xa7f616a8,
-	0x90f25bc2, 0x7862f380, 0x4e3a7eff, 0x883f5679, 0x7ec65eeb, 0x31cdef1a,
-	0xe6d55f9e, 0xfcb8cb53, 0xf50788cb, 0x6b5cea2f, 0x369f5b33, 0x1fceffc6,
-	0xff61b2ca, 0x91fe3c6d, 0x79c0264b, 0x86871de8, 0x3eee5c24, 0x1efc33e5,
-	0x1a57b826, 0x823e93d2, 0x654db669, 0xbf3464f7, 0xaae02f7d, 0xef1db83a,
-	0xf6bafb19, 0x94f9aaa6, 0x6b30f603, 0x91fa8776, 0xa43f01ab, 0x97f9d04c,
-	0x282e9bd5, 0xf8cbbe6c, 0x7e7f0770, 0x1b37f407, 0x3fab59f6, 0x7ce54c9a,
-	0x317ca547, 0xbf321ef2, 0xa6ee7f4d, 0xfad5fdaf, 0x2b5bf5a9, 0xd1fbe2af,
-	0xf869df8c, 0x2c78e6cf, 0x6eba52db, 0x9ad16500, 0xf30627bd, 0x4e7868f3,
-	0x1197c347, 0x4948cb3f, 0x8110ba61, 0xb147e693, 0xcb3c9a5f, 0xfef216ea,
-	0xbaf8d3fb, 0x8fc41a5e, 0x118dc37a, 0xdb721d1f, 0x2367d060, 0xb87a3a3e,
-	0x3627e45f, 0xa99427e6, 0x678842ee, 0x9d763751, 0x394fc233, 0xbc1dd529,
-	0x0b6cf40f, 0xf8c479c3, 0xd7b99ccb, 0x57cf1c65, 0xe1fdabc6, 0xdb943d3e,
-	0x6017d844, 0x5a7bc3f6, 0xb73eed3b, 0x7c04a86b, 0xb4f4c22f, 0x7435c4af,
-	0xd2f97768, 0xc0382e27, 0x411cee8f, 0x11d38e30, 0x77f7a7af, 0xf9e91136,
-	0xa543971d, 0x3f8ffad4, 0xd2da8d83, 0xda1dfb8a, 0xa071e4bf, 0xb145cd2f,
-	0xfe27f9fa, 0x86f7e11d, 0x4cf5c5dd, 0xe02c979b, 0x99abbb72, 0xda2f67ad,
-	0x30f28a58, 0x437ad7ee, 0xd0661670, 0x638d3caa, 0x51bf9014, 0xdf5c4b3e,
-	0x51607dc1, 0xf08f2272, 0xdc1e017d, 0x2f5653a7, 0x28c3dc62, 0x93bb7cbf,
-	0x6b57a39d, 0x42b71e70, 0x790ebd8a, 0xb5f4dda5, 0xc7ec63fa, 0xed0126c2,
-	0x65fe91a4, 0x0dd76a5b, 0xd67fd020, 0x847ee8bf, 0xe25da206, 0x55fad4fd,
-	0xff785c46, 0x50fad440, 0x7224f5db, 0xe6f2f53f, 0xbf2fb8c5, 0xb09ff69a,
-	0x85c61238, 0x7a35fa34, 0x1428fd8d, 0x8816c8cf, 0x5c16aee3, 0xefa39f60,
-	0xeeeb7327, 0xb0d85c3f, 0xafc8207f, 0x66fb625d, 0xce02fddb, 0x203f3b0b,
-	0xbd607d6c, 0x3d69eb80, 0xed99afca, 0x8e59ea07, 0xe7dc0a35, 0x8851b657,
-	0xf565c729, 0x11a1aef9, 0x60796a76, 0x8ea86b86, 0x1fdc46de, 0x54a1a2b2,
-	0x9d807cf7, 0xfdb893c7, 0x48df4dee, 0x38cc624d, 0x9a5fa693, 0x97fa69be,
-	0x3cd9576f, 0xcc1c0a47, 0xfebb04c8, 0xa84bce18, 0xcedabe5d, 0xd1e607d7,
-	0xb89faa57, 0x581f5ba0, 0xb3e4c792, 0xe7c62c44, 0xca57d93d, 0x1e7d9d07,
-	0x7fefd767, 0xd1fdb6f8, 0x85e9a1fa, 0x5ea33fd6, 0xc5aff918, 0x30728cd5,
-	0x82e81ff2, 0x7b1bc1f9, 0x0407816d, 0xa74677d0, 0xe915af7f, 0x702b48ec,
-	0x3fc839c1, 0xce9407c0, 0x31dbf4ea, 0x9496235f, 0xc75e71da, 0xfae34de7,
-	0xe1c83f16, 0xab4ed67e, 0x473b2c7b, 0xb80c9254, 0x36db5298, 0xf8a4e2d3,
-	0x2174647c, 0xe53a2bdc, 0x1099b6b1, 0xc8f25efa, 0x5fb84298, 0xb6d6ca7e,
-	0xea2e2d77, 0x2d8ed5d7, 0x57e5fb84, 0xf680dd80, 0x10db9607, 0x89e53d57,
-	0x9579f2e7, 0x5cce3fbd, 0xcbdd9f32, 0x292bcacc, 0x3c742d8f, 0xfc3c3cab,
-	0x959fa0f7, 0x1045c5ad, 0x8884a9b7, 0xaacf1d37, 0x2d908edc, 0x93e78d9b,
-	0x6cdb7be8, 0xf076559e, 0xc5ad2eeb, 0xb0f2adf1, 0x0e44fa84, 0x44a8b8b1,
-	0xdfa56afb, 0x7ea38dad, 0xdaefe52f, 0xe60b8b24, 0x1fb9f4af, 0x936bb5e6,
-	0xf11aaadc, 0x7c1f935c, 0x35ac7407, 0xfdfb75b1, 0x684f0daf, 0xbf78ccbb,
-	0xc32647df, 0x67c5a43c, 0x9e58d4c1, 0x7cf138af, 0xc589be44, 0xbfe58c35,
-	0x512cecd2, 0xd5170033, 0xaf161487, 0x4fe07fa6, 0x17a61156, 0xeb9d84d5,
-	0xf04c3aaa, 0xa1f54b1c, 0x02c73c42, 0xd63ffcfb, 0x735ff0e1, 0x571ba58e,
-	0x92054f8c, 0xc08a5930, 0x55bb34f5, 0x9bfb1797, 0x887f4046, 0x7382e718,
-	0xa9866218, 0xbfed0766, 0x294d0578, 0x4ba7243f, 0xea5afb84, 0xe1114ea6,
-	0x3235a9be, 0x62623fdf, 0xf6b5cce7, 0xb47f389a, 0x64bdb4f4, 0xecfdc807,
-	0x36b9ad5b, 0xf3817eb6, 0x6bbfad61, 0x60113704, 0xe08075de, 0x149c80f9,
-	0xb3fc02d2, 0xe01e7711, 0x127b3ded, 0x375b37e7, 0x90197fa6, 0x97a6ccba,
-	0x57f78a55, 0xfa84591f, 0xdd304ae0, 0x6ff34993, 0x7cb197d9, 0x2642e986,
-	0xf6dbf085, 0xc6bf9672, 0xcd086174, 0xce5f6bbf, 0x49c0b0f2, 0xf623b607,
-	0x48ff428a, 0x7de38768, 0xc01afb9b, 0xf16264b7, 0x0515e917, 0x7db453d7,
-	0x44e96b21, 0x1ef8f00b, 0xa7884dd8, 0xdafc16d4, 0x02eaf106, 0x3dfb0ab7,
-	0x837bf336, 0xf1aa69be, 0x7099b455, 0xf02903fe, 0x4fce43ff, 0xc9a42e4d,
-	0x8bec0d7d, 0x6bee8d25, 0xb4ed1d60, 0xf606d3dd, 0xad1bec66, 0x377ec053,
-	0x5ca7f3bd, 0x0afc9fbc, 0x37d8cf56, 0xf6909ce8, 0x066fece7, 0x8f5c8a6d,
-	0xffcf6d3e, 0x62a3be14, 0x5054ff40, 0xaa0ee49d, 0x44dc6b87, 0xbe60b255,
-	0x362f9fac, 0xb69f6611, 0x82ce4ad9, 0x10c0c95c, 0xf6455b8e, 0x6bc84e92,
-	0x26b49cf6, 0x9b5f69f5, 0x845abd92, 0x23293971, 0xd8117478, 0x7bb1dfff,
-	0x1bb7043d, 0x14be73f7, 0xed8cd7be, 0xfec1b10f, 0x177fd010, 0xf2a7f349,
-	0x2f8b17f8, 0x88dc9493, 0x07ef3079, 0xec1a7efd, 0x63609f37, 0xbf6807fb,
-	0x63abb044, 0x58e98a88, 0x81656788, 0xdf983d28, 0xde8f1a43, 0xdc7feb47,
-	0x9649e2ca, 0x0f8ba206, 0x38b3c766, 0x8b074ccb, 0x8dc9c60f, 0x10ff82b7,
-	0xc1388e77, 0xa5fce87f, 0x22fee122, 0xae2379c9, 0x11341d8f, 0x3959f7a0,
-	0x99f584e0, 0x7524abae, 0xafaee933, 0xab5bcb93, 0xbd4571f7, 0x7372e20a,
-	0x7d3fcc1d, 0x7ee09f36, 0x4a53aee8, 0x934dd600, 0x91352c32, 0xf92b9ff1,
-	0x0b390f77, 0xfe21e332, 0x408e37bc, 0xc5f613fb, 0xbf0e4099, 0x056396de,
-	0x3c04bc3c, 0x32487ca2, 0xfa86ef3b, 0x7a502e92, 0xdb39f133, 0x63a92f27,
-	0x277f2812, 0xe15760dd, 0xad67a9be, 0x7ee0378d, 0x784c17d0, 0x8a4beebf,
-	0x2ff214ab, 0x609d579d, 0x6ccd9f7f, 0xbcfec38c, 0xbcfec260, 0xf575d714,
-	0xc3f74a4a, 0x4a7c5823, 0xec0911b2, 0x502a64b2, 0x73cfa6ef, 0x493cd9e3,
-	0xe3cbd3b3, 0x2e3cfe99, 0x200f3c10, 0x7f51f299, 0x9d3afdb4, 0xebf7045d,
-	0x2ad59bf4, 0x4ae38e02, 0x4851b8b5, 0xe4cf7884, 0xdb7e8212, 0xe78cbb64,
-	0x307f6072, 0xc29b1b9c, 0x0f94efed, 0x813d712a, 0xdc30e04a, 0xe762d97f,
-	0x75f168f7, 0x4e39ebc5, 0x226d23ae, 0x5dd791f8, 0x07882e22, 0x8a497f5d,
-	0xe74e47e9, 0x10233ef5, 0x97be8129, 0x0095517f, 0xef44f977, 0x2faf4de7,
-	0xe0e3053c, 0x39e18b54, 0x8f4889f8, 0x4ff7cf1b, 0x4fee1a77, 0xd6f3e78e,
-	0xe47064c1, 0x1d6d313e, 0xf238ba68, 0x8b53f409, 0x65f01714, 0x3efdddbb,
-	0x5bfa7bac, 0x38b97265, 0xb63e33e2, 0xa5c46f9f, 0xa1ff5c38, 0x2e03b4f8,
-	0xf3afaeae, 0xafbf695b, 0x07eaca1e, 0xb95d821c, 0xc92997f2, 0xf1cde760,
-	0xa968decc, 0x97c03b86, 0xcbe18133, 0x3f5bba39, 0xe267c557, 0x01be9a7b,
-	0x3d9ea0ee, 0xac7e6072, 0xd78a6575, 0xedd78055, 0xb3f38276, 0xe65ba51f,
-	0xed699e82, 0xf86789ec, 0x6aeba637, 0x7587ee57, 0x6c67ff1d, 0xe03698bc,
-	0xde391292, 0x3864e87f, 0x3375aaf3, 0xf3fda66f, 0xbf5c65da, 0x8be7e549,
-	0x1e92f122, 0x770d1781, 0xef16761d, 0x7533f0d1, 0x3c22bbf7, 0x2119fa9f,
-	0x9e124cce, 0x99f86887, 0x9c3867e2, 0x138d8872, 0xddc7e1bd, 0xe6069ce5,
-	0x87370a31, 0x280a6e18, 0xb7f7f03e, 0x118fc07a, 0x8af54f37, 0x3cf12f9b,
-	0x53bdaafc, 0x186ebb2f, 0x7df7e9f4, 0xb689d31a, 0x8f82fbd8, 0x56ef7e72,
-	0x06cc6eea, 0x8993717b, 0x48937f9d, 0xe714adc6, 0x7bb4e3bb, 0x20b26be5,
-	0xf6625dbf, 0x19b37b67, 0xbb76cfed, 0xd77183c7, 0xcb9e0b34, 0x0da79226,
-	0x06bbf5f6, 0xdfc8d458, 0xc72ef8d1, 0x9a1ca361, 0xeffc0278, 0xf3fc98d7,
-	0x1b81ca6e, 0x197a48ec, 0x93b8c393, 0xe21126ca, 0xfdfc8e42, 0xe04faf80,
-	0xc3c02d4e, 0x25ef0571, 0xa0ae3eaa, 0xbecdfc5d, 0xbe210bb7, 0x9e1feda9,
-	0xc2ede7b0, 0x3ef09182, 0xdc6bd9c3, 0x3c796aae, 0xd276014a, 0xc4fd2f70,
-	0xfd2679f0, 0x8025f2bd, 0x72eeec9f, 0x73eb7de3, 0x1d1784e0, 0x736d6e77,
-	0x60b3074d, 0x4e7d6fbc, 0x9b1f9d88, 0x1d3dd47d, 0x7dd4654c, 0xb70f1ceb,
-	0x715dd691, 0xdffdf462, 0x163e7c74, 0xd7fbf10f, 0xc1c40a43, 0x6b9a951b,
-	0x26a27cd8, 0xa68fec0b, 0xf947f877, 0x08e1f8d6, 0xc3ff7ddd, 0x88f3f8f8,
-	0x38f7624b, 0x4eb829b5, 0xdf6128f8, 0xeb71f235, 0x39f7ae2b, 0x0f9c5eab,
-	0xb96c70f6, 0x576dd71b, 0xfe7c4539, 0x64b21213, 0x125cbc81, 0xca3477ae,
-	0x4213d4ea, 0x2a447bf7, 0xe5a76119, 0x8dc5fa7b, 0x70eff685, 0xf00e4c78,
-	0x43aea42b, 0x4984ddf0, 0x6ec16339, 0x4dacc7db, 0xa34c7186, 0xb455d29b,
-	0x874dded5, 0xc7275746, 0x858e1dc9, 0xf678c726, 0xe0a1d81d, 0x7c0b76b1,
-	0x71a0e1af, 0xff2639ef, 0xfc803c08, 0x2c20f1bb, 0x07c6bc80, 0xfcb54f1b,
-	0xa10f1f3f, 0x1e9f2081, 0x087100f1, 0x43c2b7c7, 0xc355f016, 0xaed7f503,
-	0xfe68fe02, 0xf6c2a35a, 0x0d796a1d, 0x7cf64507, 0x10a5cf7c, 0xf6443fdc,
-	0x6d39d959, 0x57ae224f, 0x6d64ecbc, 0x3ed87e74, 0x6498ba98, 0xebf983b2,
-	0x8c89efda, 0x57e80909, 0xe106a18e, 0x06e3f40e, 0x71743da2, 0x4176917e,
-	0x71377b80, 0xf806796f, 0xd064a197, 0xe2e6318b, 0x877fe010, 0xf8064a6d,
-	0xc9b63987, 0x5daf8059, 0x0ebd5623, 0x01aed643, 0x516f2fe5, 0xcd27fdbb,
-	0x6af0b5ee, 0x746ff6b5, 0xbd74fb30, 0x020f9d9b, 0x87491dbb, 0x2c41ff66,
-	0x9a108740, 0x86cafa63, 0x0db9baf6, 0x41d039ec, 0x205fbaf9, 0xe41fe04d,
-	0x5329dc9b, 0x17ebcfc1, 0xcece8092, 0x860c5fbd, 0xf3716538, 0xde8147ab,
-	0xd43d6d62, 0x350f5fa5, 0xbf9ad1fa, 0x342bcda3, 0xcf9b487f, 0xe504df82,
-	0xd3b9fcd9, 0x26add6cc, 0x6e782c87, 0xeaf3f1f9, 0xbfae6e55, 0x3147ed12,
-	0xa42dc7ef, 0xeed2e915, 0xf399b91d, 0x9d10f8a3, 0x39436687, 0x3e513721,
-	0x1defc4dc, 0xbfa5c9b9, 0xbc96e157, 0x688ef7d8, 0xbef6f4f5, 0xd6b87c71,
-	0x6df46eb0, 0x763e43d3, 0xfa7fc8cf, 0xd2773cd8, 0xc12fd110, 0xce979a80,
-	0x327069ee, 0x62521c3e, 0xb9fb578f, 0xb5324efe, 0xe5b9c365, 0x8efe7bfd,
-	0x7b2be3e3, 0xf81efefe, 0x494f1389, 0x4eb5f604, 0x012e353a, 0xd2f3e7d7,
-	0xab593d70, 0x9369fbd7, 0x88e7b08d, 0x5777ed1f, 0xdc7a520e, 0xc167d00a,
-	0x1e67b7f4, 0x77d429ff, 0x2244b8f1, 0x2a144dcf, 0xc710a19e, 0xbfbfe42d,
-	0xfe605073, 0x907e5692, 0xf3c5eeff, 0x21b0b71c, 0xc48fbb42, 0x9be7211c,
-	0x9a193df8, 0x593a6f5c, 0x8eca4a74, 0xfdfc0f96, 0x5a0be233, 0xf399a15c,
-	0x11fcb48f, 0xa77cb7cf, 0xfc096ee9, 0x89a4eff3, 0xeed11dc4, 0xe0ce950c,
-	0x2f1ce223, 0x4a7e0c3b, 0xbd3f73cb, 0xde2b8e99, 0x4adc4437, 0xfede6de8,
-	0x5be4367a, 0x8ff798c5, 0x9dfbf918, 0xfef1bbe6, 0x2a092191, 0xfb5bd3d2,
-	0x38a6ae93, 0x27720d19, 0x65cbcfcc, 0xe51877f7, 0xff9ecafb, 0xd91b6e48,
-	0x927bbf33, 0xbf0e51bf, 0xeb80533d, 0xc3c9bd4e, 0xb47ddb88, 0xbfda7e9f,
-	0x9fa7ed10, 0xf8af63fa, 0xbdff989c, 0x1af30d2f, 0x9f7bbd5e, 0x4e7f064e,
-	0x64f4e9c3, 0xbb899b86, 0xec4c9a7f, 0xf232f2dd, 0xf30773ed, 0xd710e66b,
-	0x3fe99bec, 0x78ae0a77, 0xd27e17b4, 0x4ab3fb0a, 0x0e738d38, 0x41ffa217,
-	0xe31079f8, 0x1c473638, 0x7bdee789, 0xa19bddfd, 0x5b9832f9, 0xbf0578e3,
-	0x36b802c7, 0x6f45538e, 0xb2e049d4, 0x98ab4a15, 0xba7ee31d, 0xce519746,
-	0xf6094847, 0x8d3a27a3, 0xabd23038, 0xefdae7f9, 0x4c7e50c0, 0xddf5a24f,
-	0xff63e6aa, 0xce61c6a2, 0xdfc69e97, 0x9c95fa9e, 0x1cdee3c0, 0x4e4e17ff,
-	0xdbd80b7b, 0xe519be93, 0xecd72c66, 0x90342147, 0xfc1fa983, 0xa9092191,
-	0x97850fa8, 0xe3a6e214, 0x3fa8190c, 0xaf8a4eff, 0xe3ddbc40, 0xc27acf64,
-	0x1325f55b, 0xe37724f1, 0x663e0e4e, 0x96eddc03, 0x1f106cea, 0xba5ecebd,
-	0xda6f5406, 0xf0b305a7, 0x1336879e, 0xf4d99081, 0x102d73e6, 0x251ef047,
-	0xa0a03e78, 0xc054ff79, 0x56a5efe9, 0x5e75479c, 0x08b1e424, 0xbcd8333f,
-	0x587e06c6, 0x6f9d8530, 0x7448983b, 0x27f790fb, 0x8f06bc30, 0x1dd9bf9f,
-	0x2f12fca3, 0x29dc499f, 0xc72e38d9, 0x70a3fc63, 0x3ffb09bd, 0x481d704d,
-	0x9e65bf01, 0xce85f380, 0xa40e13bd, 0xee3b7a50, 0x333b444c, 0xdde0f83d,
-	0xc6882a4e, 0xcf8b1eff, 0x780a16bb, 0xeaa140cf, 0x59617cc2, 0x98dfee26,
-	0x99e48ff0, 0x433e50c5, 0x74cdf9c6, 0x788252b1, 0x2134d9d4, 0x7b8be607,
-	0xf85ab684, 0x297f5c1d, 0xfd38876b, 0x7cff30c9, 0x0c7938a7, 0xaa9c76fe,
-	0xefe187e5, 0x3cc31203, 0x0bced56d, 0x7cb4cdfb, 0xf7016cd5, 0x66774eef,
-	0x7e047f10, 0x7953d70a, 0x6cb8a58e, 0xb8005fee, 0x3fa4599e, 0xc4bb3837,
-	0xeb910246, 0xef138216, 0xf7c83b21, 0xfc097769, 0xe7ae7c5e, 0xcfbc7037,
-	0xfbac9b99, 0x3f3094ae, 0x6453bbd3, 0xb3e471f7, 0xf4d6a1df, 0x87ae46eb,
-	0xf1f9f037, 0x8e864f3c, 0xd288628e, 0x5b3f4088, 0x62e5be47, 0xa5cf0e1b,
-	0xe78707e2, 0x1c6ef6d3, 0x8ad79861, 0x17116b95, 0x6f1d6c69, 0x1382ec36,
-	0xdfea6ec1, 0x9f4f25bb, 0x97c7a18f, 0x3d9a13b5, 0xc457bd98, 0xf9d9c375,
-	0x8902cf94, 0xaebfd3f2, 0x726098bd, 0xd078801d, 0x78dc97ad, 0xbd944e8f,
-	0x1be8a0f8, 0x50df8bd9, 0x7aa3cc1d, 0x1f0264fd, 0x41910737, 0x8ba63760,
-	0x380a7edb, 0xa6e3a4ea, 0xb48e0639, 0xef9b4771, 0x063d5217, 0x6c3390dc,
-	0xa5fa659d, 0xa4efdc34, 0x76c3f7cd, 0xae25fa84, 0x6fd2fe18, 0xf774b212,
-	0x4aed847a, 0xe7225f84, 0x64bf7b7e, 0x9547f53a, 0x206fa01c, 0x7b458ff1,
-	0x42c97186, 0xf10518d8, 0x1873b4c1, 0x744af1e7, 0xf3e38afe, 0xb02f88d3,
-	0xb752427f, 0x15fd187e, 0xd63cce2d, 0x7a53f9a9, 0x8de3849c, 0xa57dd8b3,
-	0x810a4e1a, 0xb3ffa09f, 0xf4eb8c44, 0xfdad1b86, 0xa212f0de, 0x564c08f6,
-	0xfae1788f, 0xf2f175f7, 0x197c6d17, 0x05f6864a, 0x343e1a27, 0x9bc718bc,
-	0x83c434ff, 0xba6f1a7a, 0x0e6f197a, 0xaed1908c, 0x7cd7e6f7, 0xeaf3e4ea,
-	0x37a62704, 0x7f1b355c, 0xd82c6897, 0xf937f011, 0x6b8e15b8, 0x1c9c33d5,
-	0xc1245b68, 0xec1791fa, 0x1cb76647, 0xfff078b4, 0x81c4c600, 0x008000d5,
-	0x00000000, 0x00088b1f, 0x00000000, 0x7cbdff00, 0xd5547c0b, 0x67b7efb9,
-	0x332479ef, 0x49926649, 0x1d843c32, 0x09212108, 0x11bc210e, 0x11084937,
-	0x88a80ca2, 0x1f01d68f, 0x4d092060, 0x6f53d5ad, 0x52812133, 0xbd583d6c,
-	0xf4f47bd6, 0x41ed5837, 0x0108750d, 0x26702783, 0xd0f098a0, 0x7ac0f820,
-	0x452968da, 0x5a18921b, 0xf5cf6a0f, 0xf6b7df7c, 0x8326664e, 0x73def7a5,
-	0xd62e9f87, 0xf5af6b5e, 0x5ff9efad, 0x4a9b5adf, 0x500a9fc0, 0x982015b3,
-	0xe1f95006, 0x06484a86, 0x01203be8, 0x96d40314, 0xfe1b41c9, 0xb1fdb4b5,
-	0x0cdd45c7, 0x51df8956, 0xf5c02661, 0x950b7e20, 0x06e6c50e, 0xbc95e658,
-	0xd6801672, 0xe1bfde2e, 0x62a82592, 0xf9af7afd, 0xe89b1ee3, 0x5fff35fb,
-	0xb800c803, 0x197f7f51, 0x2ffb0ffd, 0x1860a4d3, 0x3b365d5f, 0x978dffba,
-	0xa6913fca, 0x62d72c02, 0x3e4fc39e, 0x22f2a793, 0xac24becc, 0x8fb74457,
-	0xcfb92673, 0xe32ff1d9, 0x32d7fc61, 0x65f3c5c0, 0xaff7516f, 0xc8ed77e9,
-	0x523d48f2, 0xace80166, 0xdb1971b7, 0x7f016e5e, 0x4d2581c8, 0x0065c450,
-	0x9d0a0152, 0x581998b8, 0x0d0164bf, 0x136308f9, 0x3ab9f7e0, 0xdf86131d,
-	0x07e3883f, 0x8e30dc70, 0x3801c81f, 0xfae4ef54, 0xae1ef56b, 0x2f82935f,
-	0x877fe3a4, 0xb8a8b0bf, 0xdfedc59e, 0xdf38fc51, 0x8f0a4be2, 0x93d69b3b,
-	0x71830b4f, 0xf73f9eb4, 0x0de3fd16, 0xb6bfdc30, 0xbf8b33fd, 0xf9ebf2f0,
-	0xa7e7f35b, 0xcd3f3ca8, 0xcf0c15ab, 0x180144bb, 0x9a5ceb83, 0x635fcd1b,
-	0xc6f9589e, 0xfeb96fca, 0x56fcac7e, 0x90c7acc4, 0x32a2f40f, 0xffc38a8d,
-	0xa6d0264b, 0x437e5e5f, 0xb3f8b1f2, 0xdb2305bd, 0x72c97e01, 0x974f1e1a,
-	0xbe2b7417, 0x19974142, 0xb752baf5, 0x40efd40b, 0xb2b9ca0a, 0x4889c213,
-	0x2be7f5d8, 0xf4a8513e, 0x9471f04a, 0x6c7c033e, 0x1e1e5bc8, 0xe425d17f,
-	0xbcf0da6b, 0x7764148b, 0x0b1f3d11, 0xa8eb3881, 0xea1471a1, 0x6c39601f,
-	0x155a61d9, 0x635c75c2, 0x547d3b81, 0xe0328a26, 0x937db894, 0xf6e3c4d3,
-	0x8266c5ff, 0x3e5e01ab, 0x48025998, 0x3cead79f, 0x42011306, 0xbff7e066,
-	0xdfb9524e, 0x240824e6, 0x74a0fce0, 0x945ec8db, 0xb45c8012, 0x25b4653b,
-	0x364388d8, 0xd91f612b, 0x8157bf61, 0x2fdbb406, 0x050ef78d, 0xc914076e,
-	0x4c738fe6, 0x7ef4598d, 0xf61e7bb8, 0xa8a4559b, 0xcb8bb0db, 0xda877eaa,
-	0x9d580efb, 0xfeff5ef4, 0x699877ef, 0x1780bf9c, 0x0ed78429, 0xe7da8158,
-	0xf241cc3b, 0xe3e48b1f, 0xfdeb09b2, 0xec560003, 0xb8557f3f, 0xd76e5014,
-	0x13a37740, 0xc724b9cb, 0x8d7bf238, 0xfece9bd6, 0xe50a31c3, 0xd39740b4,
-	0x956fdd02, 0x8fd9901e, 0x41c92694, 0x53f61ac8, 0x5a32ead7, 0x3a256c80,
-	0x7ae1b416, 0x4bdafdb1, 0xb4bf5c4a, 0xe1771f48, 0x9321419f, 0x7ad1085c,
-	0xf84da8bb, 0x14d012a3, 0x6d4b29c0, 0x97e4ed31, 0xce459e90, 0xc973e7e8,
-	0xef5ea277, 0xf84bf18e, 0xf7bcd133, 0x8bbcc53b, 0xf726bfe4, 0xb65ffae0,
-	0x43cdef68, 0x9a4e077a, 0x0e7c59e1, 0x6732b1e7, 0xd0da5f24, 0x973983ae,
-	0x07fd8bb7, 0xe9153513, 0xc7f49979, 0x9ad1f541, 0xfdf2f53a, 0x940cf6a7,
-	0xb9787760, 0x13028579, 0x7b4f1d58, 0x3df98632, 0xff3aaf82, 0x22d9f963,
-	0xf91d9341, 0x5bddb0bc, 0x0465ae46, 0x8f913b1f, 0x80c95ef8, 0x295cf3c6,
-	0x78fb0d1f, 0x46a25cf9, 0xb9f2fefa, 0xffcd1ad1, 0xfa6be92a, 0x3feffeb0,
-	0xfe48983b, 0x2aa8f913, 0x2e0317a8, 0xd659f79b, 0xa1f7a15f, 0x6dc13951,
-	0xf5d16f58, 0x81c4e5fc, 0xefc4f9a3, 0x67de4deb, 0xe3651a69, 0xe48515c4,
-	0x9c96b737, 0x0d2477c5, 0x7ed107a4, 0x7709d524, 0xfb401960, 0xa40b7d21,
-	0x1993eb02, 0x36f34042, 0x9534f06a, 0x29abe60b, 0x1c41efc4, 0xe341dbb3,
-	0xe7a429a9, 0x338bd7f0, 0xf923857d, 0x0a8f52de, 0xd6b4f385, 0x1b2534db,
-	0x93bd5f60, 0x1ef56deb, 0x57ad5f2e, 0x2c74dcb9, 0x8e20c1f9, 0x3459ab53,
-	0x7df86d25, 0x8fb0aa57, 0x8867e805, 0x052005ae, 0x0b73a803, 0x5ef5d61e,
-	0x249b8291, 0x27ae1392, 0x97289f82, 0x08dc9ec1, 0x4d2936fe, 0x35b26693,
-	0xf28bbcb0, 0x063efc4d, 0x59f3e0ff, 0xdca3fb23, 0x4baaeaa3, 0xbae67e62,
-	0x961724b4, 0x52f8743f, 0x6e916ca8, 0xb8017c39, 0x5bf512ee, 0xfe380be5,
-	0x7842f0f4, 0x74c3e310, 0x15f10c14, 0xfd13b77f, 0x402c3a33, 0xca80c1f2,
-	0xd3a45976, 0x492e7da3, 0x323e70e7, 0xe0c7af9d, 0x30cad67b, 0xe83ed1e9,
-	0x17be2349, 0xb4767cdb, 0xc843a428, 0xf66e9355, 0x9cde3848, 0x26578b74,
-	0xa6fa26d2, 0x75fe446f, 0xd884e3a4, 0x6323a3bf, 0xa6f68aac, 0x4fbc6f29,
-	0x1cd9ad76, 0xcc2b8161, 0x71113dbd, 0x719e133c, 0x9f22bc52, 0xbdf235f6,
-	0x01c977f3, 0x73886bf6, 0x9e758fc8, 0x7186f64a, 0xd92e6b9e, 0x7fd256bc,
-	0xf5ed117a, 0x54f26260, 0x5dd0cff2, 0xd6b8ebc6, 0x6f91d626, 0xd8bb17f6,
-	0x9f0f859f, 0x6dfef7c0, 0xe9fc8010, 0xca1fdd35, 0x9a94f480, 0x907b32f2,
-	0xe4d2c3ce, 0xfc9f2a14, 0x9701725d, 0x897b92a7, 0x764d073f, 0xa77de695,
-	0x46ce2d5e, 0x72ded17d, 0xd61d0098, 0x0a1cb782, 0xa1ea2795, 0xe5f51b38,
-	0x971b7aad, 0x5c9deb27, 0x70f7aa9e, 0x49db1879, 0x76c75e9f, 0xb037b7d2,
-	0xd85dea9d, 0x1c31e54e, 0xdba2ca97, 0x96bc7893, 0xb42c92db, 0xd0c9838e,
-	0xfa4fcc6c, 0xb70c4e14, 0x3fe01782, 0xab6afb1e, 0x978c2aed, 0x34a17f56,
-	0xb3f4f90d, 0xac142aaf, 0xee3c5b1f, 0xbb60bfa1, 0x1fa667f9, 0x9bde90db,
-	0x8f5a394e, 0xaa9edd63, 0xfa41d8fc, 0x9d112c79, 0xb9b59923, 0xa63a434b,
-	0xcd1c6f93, 0x3660d76c, 0x7af4d3d6, 0xd95d7cc0, 0xa595807c, 0x42e0f93d,
-	0xaf597125, 0x577f21b3, 0xa3dffdda, 0xabb025ba, 0xaa2aeca2, 0x7b248863,
-	0xb641cc97, 0x7b92b1f7, 0x95bbc605, 0x127fff0e, 0xd17b0dbf, 0x91a43fa4,
-	0x49a9987f, 0xbcb372e0, 0xe1a49383, 0x95bf46e7, 0x49ff458e, 0x25debafa,
-	0x98cd7db3, 0xc741692f, 0xfa35fb48, 0x96ab38cd, 0x9e66fc91, 0x72a26f2f,
-	0xeb8b8559, 0x9ab355be, 0x1ccbfec8, 0x94bf7b97, 0x65d07fdf, 0x512dbd66,
-	0x389c5fb0, 0x8e9bf468, 0x7bb8464a, 0xf8312ba0, 0x69f5e92c, 0xd612637f,
-	0x8ab27917, 0x0337dd64, 0xb63b5dd7, 0xebe57b51, 0xde576cad, 0xf2e12f24,
-	0x6990a899, 0x21d0bed8, 0x2a64c379, 0x4a6a3ff3, 0xe4a776a3, 0xd42db625,
-	0xa6289da6, 0xbbd96cf6, 0xd5a7ea90, 0xa7510a32, 0x2ef38594, 0xb9c5bf60,
-	0xbe1b5e29, 0xd0fc2a77, 0x85dfd245, 0x04de49b9, 0xf04af3f2, 0x7baa1ae9,
-	0x9506dead, 0x6958f1d6, 0x4aa38d32, 0x5bd6135e, 0x1ffd286e, 0x2f894744,
-	0xda892405, 0xd7e10a5d, 0xc3f77f27, 0x6bf62732, 0xd9012719, 0xde70a9cf,
-	0x85fe889f, 0x026a899d, 0xb38b69f9, 0xb16bde8c, 0x5c4dce48, 0xff5295f7,
-	0x7d598e40, 0x7e3dc71e, 0x41e39d9b, 0x8c055be5, 0x36df8e83, 0xe542e386,
-	0xa84bf35b, 0x78126e3c, 0xcaadf2bd, 0x41376e0a, 0xe54a9c98, 0xf7e2dfed,
-	0xb0fe97b6, 0x1fe38dcc, 0xdf62ef1b, 0x562a7282, 0xf624fc22, 0xbfde8907,
-	0x77fb9abd, 0x9d0f9948, 0x0b17fec5, 0x38ac8a52, 0x213bb97f, 0x58c57faa,
-	0x497d5457, 0x2562a8f6, 0x16564fc2, 0x6fd54564, 0xb38a9628, 0xe6fbfa23,
-	0x57d54427, 0xb38ab994, 0x54dffa23, 0xbeaa2a39, 0xa8aca6f2, 0x1cd342fa,
-	0x61ea3fe1, 0xf3b0997e, 0x20d965f9, 0xa9fc898c, 0x037df453, 0x3b26efdb,
-	0xa9f812ef, 0x09f885c8, 0x55d652e5, 0xd8b971cc, 0x00affbae, 0x92667b74,
-	0x2ebf17ff, 0x83de8f1c, 0x4999fe20, 0x16fc4878, 0x201e2376, 0xdc60a47c,
-	0xcca7a08e, 0x2bc71d11, 0xff27cd40, 0x84b9d15b, 0x67b954f1, 0x319a1979,
-	0xbdfa31f2, 0x8161f90a, 0x2ee86243, 0xa5c732ea, 0xf46c62b7, 0xabae06fb,
-	0x316be9d0, 0x09529bf9, 0x6eb4058b, 0x7ac635c2, 0xb72e3a0c, 0x8ef90a9e,
-	0xdfff1432, 0xfd2c575c, 0x7f791b00, 0xa0d74b11, 0x8881c74b, 0x760718a7,
-	0xc43e32a6, 0x3e1e3b9f, 0x254f7030, 0xa45737fa, 0xee48737f, 0xf79785e5,
-	0x97b8c66f, 0xb8c67bc3, 0x2cd0fbc6, 0xfbc6fcf3, 0x2955cf43, 0xd89df3fe,
-	0x73ce293f, 0xf9ff14b7, 0x17fdd173, 0x03a36a28, 0x4828f8ed, 0xfbf100de,
-	0x2410aab8, 0x35ad3d2b, 0x43e8b951, 0x747842bf, 0x1340d9f1, 0x837af395,
-	0xfeb8adc7, 0x956572eb, 0x1e060df2, 0x8cd75d8a, 0x3a4fb154, 0xabb5497a,
-	0x5012ded8, 0x68bfb4ed, 0xd3b55879, 0x8345aa3e, 0x6a2fda0a, 0x691b4d13,
-	0x63e5a1bf, 0x549cf589, 0x52f3e7e1, 0xca318e05, 0x5e7f6567, 0xb6d5962a,
-	0x8b09479e, 0x60317cd4, 0x94703021, 0x48c15e70, 0x0954779c, 0xa3be683a,
-	0xbe1d070f, 0xa57e3f08, 0x29146f38, 0xa7e93a5b, 0x91fa45a4, 0x16825b52,
-	0x391637e9, 0xaff5515d, 0xc7d8aa9c, 0xbd45467b, 0x159a9d77, 0x6bf10fd5,
-	0x46a0e12e, 0xe42ae40b, 0x5e894d47, 0x7cb177c2, 0xfd7d17fc, 0xe093875e,
-	0xaadd9813, 0x97138fec, 0x7f82a5bc, 0xa457cfb1, 0x6fea7d8a, 0x6e583d68,
-	0x35f4154f, 0xe2013ec9, 0x3e933710, 0x4f71d6c4, 0xc3c68aba, 0x77a43d91,
-	0x22e9bb5e, 0x4ef86f42, 0x29d7d5ea, 0xe9decfa8, 0xc44eefa6, 0x8ba923fa,
-	0x699e7d44, 0xffac04cf, 0xd45cb534, 0x374d36af, 0x057e017b, 0xc32baf8b,
-	0xe7dbba7a, 0xfb79c54f, 0x12ad8ecd, 0x24c519e2, 0x787b9141, 0x0588fbff,
-	0x160a29e3, 0x21734c95, 0xd8ab76ad, 0xa024d72f, 0x25fea3ff, 0xaafc4a9a,
-	0xdce43049, 0x1d714193, 0x9134ceee, 0x6ff630bf, 0x87be0b76, 0xfcd8e7ef,
-	0xc25f42b5, 0xa5fa2ac9, 0xca2ff7fb, 0x9ed8bd24, 0xe7f5e4ea, 0x21e799ef,
-	0x7d74857f, 0x7ffdfa97, 0x3c536ba4, 0x62cc9aba, 0xfc96de9e, 0xf9bb8a52,
-	0xd21c51e3, 0xbb70bcb0, 0x4213cfcf, 0xcb8c2ba8, 0xf5848f35, 0x4bc59746,
-	0x90fb7d38, 0x6cacaf7c, 0xb213f3d4, 0x9c8de85d, 0x1bb8da62, 0xfaeb9fcb,
-	0x3bcd14f2, 0x1819e683, 0x01f51cb7, 0x56e3039c, 0xe93a8a14, 0x0d172c83,
-	0xf81ede10, 0xf7979256, 0x7e0763c7, 0xbfac03fb, 0x97be4777, 0x8907f470,
-	0x82ab3f82, 0xb07b1a13, 0xbc1acd3e, 0x3e748c2a, 0x967fe694, 0x6b36e0f4,
-	0x9beb1270, 0x8d126363, 0xfbc0692f, 0x877f6310, 0x32d538fb, 0x1fee2471,
-	0x88d82f39, 0x11ccb7cf, 0x45e6367c, 0xee28da9e, 0x3c5b37bc, 0xf9c0e837,
-	0x06ff885b, 0xc074433d, 0x03c72758, 0x45a47910, 0x61e443b2, 0xbce260ff,
-	0x1f192d49, 0x359cf7d6, 0xcfaebef1, 0xe68057d8, 0x9b933d58, 0x27399e78,
-	0x6c4cc936, 0xd4ccff00, 0xb6af4859, 0xfa7de7ad, 0x7de8ee8c, 0x7f4eacfa,
-	0x9bdf03a9, 0x7cfc7ef5, 0xdc7d3cc8, 0x299410d9, 0x89e9cf5e, 0xdf4f37ee,
-	0x1f3bcfa7, 0x54cdfcfd, 0x868dbe3d, 0x8e7991d1, 0x33ff7d3a, 0x0a427c78,
-	0x3af929e9, 0x516ef919, 0x3a9d9865, 0xeb5a37ec, 0xf90e5fb1, 0x85971b47,
-	0x11779da7, 0xa8f56dfd, 0x93f216d0, 0x7b0d2e1e, 0x770d3c2a, 0x7988d4c2,
-	0xf837bd74, 0xe0bef838, 0xdc9eb4e3, 0xbac7cf9f, 0x410cd3b9, 0x739d7875,
-	0x820d3e75, 0xd3a0f3e0, 0xd99e7cc2, 0x61e9cbf5, 0x98f5647c, 0x5f588d40,
-	0x6a089a82, 0xe7b53f84, 0x65d546a6, 0xce3a3e43, 0x9f8fae98, 0x351d1de4,
-	0x0c37818e, 0x5a9abdf9, 0x643849de, 0xe31d63ba, 0x13d9948e, 0x3e2dc6a2,
-	0x64272b1e, 0x2476e11c, 0xd7089ff2, 0x70a2569f, 0x80772cc6, 0x3fb30038,
-	0xc9706254, 0x68ec9976, 0xe7e8d9ee, 0xc8cbb4e6, 0x84fc72ed, 0xef9f3fa9,
-	0xe9f9fbfe, 0x99f9a2d2, 0xcfcd1156, 0x3f345f74, 0xf3455733, 0x9a3f946d,
-	0x4dd6632f, 0x6abf6a89, 0x7d545163, 0xa37383fc, 0x006167fa, 0xdc4fac8c,
-	0xffaa24ba, 0xa22beda4, 0xba9f93ea, 0x5e7faa2d, 0x7b544d70, 0x2baacefe,
-	0xa8617f92, 0xb11faa2e, 0xf20df4d7, 0x1fedbabf, 0xeff9e6a2, 0x34a2ff96,
-	0xcbaf2f3d, 0x438e997f, 0xc7fa1a5c, 0x4538e1a2, 0x93f215e9, 0xbe37f6ae,
-	0xa04bfca0, 0x53bce544, 0x1b780960, 0xd909edb1, 0x1b5f9127, 0xa136ac83,
-	0xc13268df, 0x8ff7f23a, 0x879c4c9a, 0x2abcec34, 0xaa8be04d, 0x9ff7e134,
-	0xf8a69b46, 0xeccff066, 0x78449ede, 0xa0993643, 0xe29ae29b, 0xc671bf65,
-	0x716be101, 0x7034793e, 0x7934ab5e, 0xa899b2f6, 0x329bf287, 0xd1e51fef,
-	0x7d71507e, 0x3f1fc78d, 0x8b9ff941, 0xfa4a9b0e, 0x03faa72a, 0x7d70b714,
-	0x2461e7a1, 0x3eaf795e, 0x49f6893c, 0x67957d46, 0xbfea66e3, 0x93858eea,
-	0xf43aff68, 0x498e8efc, 0x88721165, 0x388adf5c, 0x697be8f8, 0xc4673f22,
-	0x6aacdb87, 0x6bca0f63, 0x3ffc2c9a, 0xa5ef85c6, 0x903ffae1, 0x9c0b361e,
-	0xbad33015, 0xde724e31, 0xba8085df, 0xe194cb0e, 0x8d7ea478, 0x84c1f54a,
-	0x26f9dc68, 0x08fb4411, 0xffc72a5b, 0xbb7f0d5b, 0x36f98f2e, 0x3fee88e8,
-	0xc144f778, 0xd7236fcf, 0x2c67df90, 0xdd061d62, 0xfc3f75e7, 0x7b87eea9,
-	0xe446ffc9, 0x78edd79b, 0xf5f0893c, 0xa7815c99, 0xe8cfe78d, 0x4d267d72,
-	0x3bf5e9e0, 0x79919c13, 0x2b90eac7, 0x36db5eaa, 0x423679ca, 0xeb1bd70f,
-	0xad0a4bf0, 0x3f6e8363, 0xc93d9dd5, 0xf1e301b7, 0xdc70d3a7, 0xbf171d9a,
-	0x37de8fbd, 0x3888640d, 0x6ef9e01a, 0xd7180f79, 0x4415f2df, 0xd297d2e1,
-	0x25e57e44, 0x95cb0ba2, 0xdf513858, 0x776c6256, 0xfcc6f951, 0x7c3bb272,
-	0xbeb0961e, 0x84cc13ac, 0xb3fb96d3, 0x53f4c4cc, 0x2f677de0, 0x9a5f6d2e,
-	0x04dcf3ca, 0xc5c5333e, 0x9d5dbf77, 0xc686fd44, 0x4319c633, 0x2bd459b9,
-	0x419cc057, 0x246b9af9, 0x9f380dc6, 0xeefb9e8d, 0xe299b318, 0xbbdf31af,
-	0x0ef0bfe0, 0xf00ac5ea, 0xf8c6b8f2, 0x7e51a900, 0x90cb03f8, 0xbf24ed1c,
-	0x98532eba, 0x677539f2, 0xd1fe7cac, 0xebf030df, 0xdfce9007, 0x57b17d55,
-	0xbb7fba42, 0xfb57e07a, 0x4fadf9f0, 0xb5c5dfa1, 0x87fddb66, 0xc3ce22d3,
-	0x917ddcce, 0xc8f10ced, 0x33924ff3, 0x25eac97a, 0xeaa0f8fb, 0xbc489ca5,
-	0x616d227f, 0xb307bd27, 0x479ee2d3, 0xab2beec4, 0x6ed93f48, 0x8699c655,
-	0xeba7de5e, 0x930bdd65, 0xd25d79f9, 0xfd447ad0, 0x57f39979, 0xbcac0775,
-	0xd7477fbf, 0xbf17aa87, 0x9f991998, 0x54bd416b, 0x7274a873, 0x2a9ce749,
-	0xf1cf66f2, 0x6fd4a9c1, 0x21efeca3, 0xe978393d, 0xefaa64e3, 0x5e4bf379,
-	0x6574dc0f, 0xf323f7f4, 0x9b5cf922, 0xf92ef034, 0x567dea93, 0xa550f295,
-	0xdd8ef2fb, 0x4e9af58e, 0x9eb83bf4, 0x239eae0b, 0x6a7ed34f, 0x979404bf,
-	0xb02709aa, 0x9569af73, 0xaac79482, 0x65bddb6a, 0x9aabd60c, 0xba931797,
-	0x3f0b26d6, 0x0522d356, 0xa7f03c69, 0x748a7f31, 0x357d28db, 0xb00b1fef,
-	0x18a8efbd, 0x787d5cff, 0x4ff459ea, 0x9d9f2d7d, 0xb4363a23, 0x763f3959,
-	0x196c292e, 0xd85ef383, 0xea02852d, 0xb9f6ddb0, 0x5d6a3ec4, 0xcd0b31e8,
-	0xe5b9eebb, 0xfb0f04d9, 0x90b49df6, 0xfad75c7f, 0xbcfeb958, 0x20fb8458,
-	0x9dfac5db, 0xf322931d, 0xfc21f749, 0x81f8c883, 0xf70805f4, 0x09e39082,
-	0xdaab3e5d, 0xbb123627, 0x7dedafd0, 0xe6bf625a, 0x3bdf9374, 0xffdfebb8,
-	0xffdde695, 0xff98932f, 0x7fc657c5, 0x4f1805f0, 0xc0f3e8d4, 0xda1653f9,
-	0x9ab4d61f, 0x173bc5cf, 0x77dbbefa, 0xf0c67b95, 0x571636fe, 0x3880b16f,
-	0xc10099b7, 0x381e29e7, 0x91ab2c06, 0x07511f9e, 0x0e7147a4, 0xdd60d658,
-	0x71467646, 0xc608e3c2, 0xb9d717db, 0xf70f9e15, 0x9de31b08, 0xedead657,
-	0x858f6aa5, 0x9e3570f2, 0x75e90b5e, 0x7113f84d, 0x51f6df5e, 0xbf6716b9,
-	0x7e16ed5c, 0xc303d0d3, 0xa7d2ebde, 0x87985db0, 0xc6c860e2, 0x66b85f76,
-	0xdd53e280, 0xda0ed47e, 0x03fcb817, 0x6f607744, 0x2beb4a82, 0xccc9f7dd,
-	0xfe79889e, 0x5187dba4, 0xa3f979af, 0xe7e266a9, 0x2aa68f9e, 0xfbcfc349,
-	0xe2eb1c32, 0xddaa55e5, 0x4e6f4e22, 0xb68f9df6, 0x186f0483, 0xb769ade7,
-	0xda07f9f3, 0xe28e96c1, 0x75b83b48, 0xf3d20edd, 0x168bd976, 0xcb6d3501,
-	0x3fdc0dfd, 0x91e24bc9, 0x480616db, 0x8fa7650f, 0x8afe13f5, 0xcfd4cdf3,
-	0xae52267d, 0xe91b7fdb, 0x4f08e291, 0xd46bcc8a, 0xd17e7a98, 0xb75c9121,
-	0xaf9a266b, 0xc96fd808, 0xef0f5f0e, 0x54338a9f, 0x9e1ec7da, 0xa7c40e51,
-	0x38901e9f, 0xf54e6b5f, 0xf922cd6f, 0xbfb9951e, 0x010bf0e5, 0x9bee973a,
-	0x9f44c506, 0x4e9fdeb1, 0xe38c830b, 0x2f042e6c, 0xff79bb4d, 0xdfd21e2d,
-	0x611fa69f, 0x86f7617c, 0x234afc80, 0xe7ca06e2, 0x61420bd8, 0xd721271a,
-	0x3ce32c57, 0xf3276e79, 0x7bf562cb, 0x4d941f29, 0x4d875c75, 0xfa23adf1,
-	0xb144ee6c, 0x657b1e9f, 0xb23eba79, 0x1bce857f, 0xe92f9cfd, 0xed3d0b33,
-	0x5f180abb, 0x399d1df3, 0xbe09a4d4, 0x6b2e76c1, 0x46a63adb, 0xf044dbc6,
-	0xdf79e8db, 0x44bc5bfe, 0xd75139bf, 0xb6448cf7, 0xfff9d88b, 0xe499f499,
-	0x35b35a6e, 0x7c4cf88b, 0x7bf64753, 0xf067ef5a, 0x2e7f1403, 0xaa922bd9,
-	0x8d0fcbc5, 0x4e3c9777, 0xea9cdd72, 0xf01575cb, 0xc300acf1, 0x76b8c49e,
-	0x57fffd87, 0xe91fff64, 0xf8a2dcfc, 0x4ddfc46d, 0xf16cdd7a, 0x7fb64ea9,
-	0x0ff34a9f, 0xfc746fad, 0xf6e9b5f5, 0xff8265ba, 0x4fb7d71b, 0x15399f5f,
-	0x4bc68df5, 0x4e67ee06, 0xff48060e, 0x78a0929a, 0xec3e3e13, 0xdd90f72a,
-	0xc5f4396d, 0xa6f7b238, 0x2807af24, 0xd66075af, 0x2dfbb22a, 0xfd636fa3,
-	0xbc85f4ff, 0x9e623922, 0xad256913, 0x697ebfe4, 0xcfe2cbac, 0x42fc75a5,
-	0x5d6323d7, 0xabdf6ee9, 0x11bc88ee, 0x915f758c, 0x9fbe80fe, 0x17f1eaf3,
-	0xff9c73f7, 0x2f4487eb, 0xd6ee279d, 0x3e02b771, 0x783b1bd6, 0x1a55c655,
-	0x1f7ba31c, 0xd8261d8d, 0xe4a6cb46, 0x5d39c454, 0x36326cb2, 0xb70d9a7d,
-	0x4c6c74e6, 0xebba6fed, 0xbd213496, 0x0b2021fb, 0xaf9d167c, 0xa4d24d00,
-	0x6bc53cc8, 0x14f3f155, 0xc91bf8cf, 0x9e56ff2e, 0xb4d84e62, 0xf7f292da,
-	0xbace2be7, 0x9f3df7a3, 0x2a2655ba, 0x31f42b94, 0x8a0c4e14, 0xa74c17bc,
-	0xf133537d, 0x067bff12, 0x2df6cad7, 0x5cdae5f5, 0xfbee4f68, 0x8b1d6db7,
-	0xd62d9776, 0xfa46f54f, 0x3dc0a77b, 0xd78ff943, 0x46ee30a6, 0xfef3273f,
-	0x12d3a9df, 0xc462b723, 0x88f7c06b, 0x27f2a352, 0x265f23e1, 0x4aed7e93,
-	0xb922df55, 0x7cc9740c, 0xe941244f, 0xd8e2b8b1, 0x03c23ed9, 0xd38bf7e8,
-	0xd6c43ec5, 0x6d17ce26, 0x317ec6aa, 0x269ce9c1, 0x79c5d847, 0x579fc8b7,
-	0x9c60f91f, 0x05dc3105, 0x02e4f1d3, 0xdec37f1c, 0xc34a6496, 0xf6f33fad,
-	0x5392ba4c, 0xe91df8a2, 0xa54ffeb8, 0xc236391d, 0x53835ba9, 0xf0a13f89,
-	0x93f21484, 0x94040a85, 0xf1f138a2, 0x14de22a9, 0x87c53cd7, 0x3ed850ff,
-	0xe5e12d7d, 0x2f58b0da, 0xa6c661cd, 0x7ae036bc, 0x2a635b5f, 0x6ffb578d,
-	0xbf934607, 0xe05d297a, 0x4d2f179a, 0xa02bef11, 0x74acff50, 0x41e7ae97,
-	0x5f0be513, 0x7d8cf3d2, 0xcfdc4c97, 0x6db0bf98, 0x3d44eca1, 0x3f6f0828,
-	0x76cd79c4, 0x4df24aab, 0x3f040e78, 0x771813da, 0x0c5c1ed6, 0x5dfae714,
-	0x7db095e0, 0x6fc0e257, 0x0e061f49, 0x773a5558, 0x876e704d, 0x977f1c54,
-	0x0f2b4f7e, 0x31c5b215, 0x2f98dcfc, 0x94e7fda1, 0xe0bd2413, 0x6504dff3,
-	0x88e35c3b, 0xd31277e4, 0xd5eba25d, 0x89b0c4ae, 0x260645ce, 0xe9875ee1,
-	0x7813a61a, 0x3cce835e, 0x2cbbfbf6, 0xe07ee703, 0xa49cba66, 0xe8207907,
-	0x2ac9f684, 0xa704d1f9, 0x7048ebc6, 0x3480deaa, 0xa9daae92, 0x6ed0fc08,
-	0x35e7251e, 0x6baed877, 0x36eb8713, 0x135d85b4, 0xff8f3f40, 0x8f3a36d5,
-	0x8393aa1f, 0xfefc3d99, 0x6c2fe92d, 0xf9cb1a6b, 0xa28c80bd, 0x949963b6,
-	0x7954eb4a, 0xb545e87d, 0x07c122f4, 0xb767afba, 0xfea1f689, 0xaa0ee7a8,
-	0xaf3f443b, 0x925f69d5, 0x8742f6c5, 0xf07843d7, 0xee7c297e, 0xded7b45a,
-	0x05297cc7, 0xd35eaeb8, 0xb19a07a1, 0x87569fdf, 0xe93ee872, 0x1aff5673,
-	0x3e57cfd2, 0x2148f35c, 0x665ddbf9, 0x9df9256f, 0x18cfc09e, 0x5668bf87,
-	0x1dd845b7, 0xe0c81d8c, 0xf33180fb, 0xf4d99ed4, 0xfdd7c233, 0xce9525fb,
-	0x03cdfbbd, 0x9aee88e3, 0xe85a3ff6, 0xfeed64be, 0x4b4f188f, 0x9a1afe19,
-	0x035b766f, 0x039b6bdf, 0x1b5ef9db, 0x9fbe43fa, 0x7f08f218, 0xe73a7832,
-	0x390886d9, 0xec2e913c, 0xe3fc060d, 0xebb55e29, 0xf6907af6, 0xedee58dd,
-	0x8d2275b8, 0x07cf57bf, 0xc035ef18, 0xf7c431a1, 0x971af04d, 0xa0fef3c6,
-	0x967a4152, 0x4eedaeff, 0xa3ffa22d, 0x3dbf02e9, 0x66702e9a, 0x89bf8676,
-	0xf1df5de8, 0xd69925b1, 0x8e343679, 0x4521b9f6, 0xf1c6714d, 0x1bf64323,
-	0xcab54f63, 0xd7fa8580, 0x2bf6079e, 0x14a6ef28, 0xef4bdf94, 0x8d594db6,
-	0x4ca2f7cf, 0xe2ae2852, 0xefe294fe, 0x0c6fb35e, 0xe7786ff5, 0xc7e4a9f3,
-	0xe74f481e, 0x607e7ff5, 0x1be278fd, 0x22497fea, 0x606ed9d9, 0x69d866bf,
-	0xbe29d901, 0x5ffa405f, 0xf63cf54c, 0xdd2cbbcb, 0xf72ed84b, 0x12ec809a,
-	0x01ed9ff5, 0xf849dff5, 0xf689c0ae, 0x664fefc0, 0x6dd5df3b, 0xa32718d2,
-	0xf5c49f5f, 0xbea91b92, 0xc9ccbbab, 0x05f74e76, 0xc35ec88a, 0x109c7887,
-	0x9d1224c0, 0xfca8be04, 0xe9993b88, 0xe7e5fc36, 0x86e3d06e, 0x75c5e29a,
-	0xca3965d8, 0xa4e2223e, 0xf4711ba8, 0x9edb33c9, 0xee817b40, 0x0fdc28d4,
-	0xffbf0bef, 0xd5563d5d, 0x59773ebd, 0xeeb3ae33, 0x07edcc84, 0x585e7df5,
-	0x7a4393d7, 0x86e2867e, 0xefdc5d3a, 0xb033e7a5, 0x675df74e, 0x094b1b6a,
-	0xd8aecd63, 0xb9ca987e, 0x412950be, 0xbaabf9c8, 0x99859b0f, 0xb5fe93e7,
-	0x9f2eba1e, 0x9ff5cdee, 0x920242b1, 0xc0e5fad8, 0xb5c45f6f, 0xf910703d,
-	0xe14e271f, 0x10ff5872, 0xcf018d6f, 0xc97ef6c8, 0x4bbd23f0, 0x5afb1f48,
-	0x123ae1e5, 0x4d8a8352, 0x3fd277f5, 0xbac016dd, 0x9f7b433f, 0x99c7e254,
-	0x3f49f7fe, 0x997e4ffb, 0xf7b96641, 0xb7c7d8b4, 0xd27cb45a, 0xb809d69f,
-	0xa7a38db5, 0x3c8ba5af, 0xe215b14f, 0xa57e4b9e, 0x009cc1c7, 0xfef1223c,
-	0x5106765c, 0x655a17ee, 0xe7f882cd, 0xce56043c, 0xe7a37f23, 0xfd01ef6f,
-	0x941fe1a7, 0xf57abdcf, 0x182bc21e, 0x627deeb7, 0x89bfb9c4, 0xbb6d69f4,
-	0x6b84ff04, 0xfc4cf75f, 0x5e46097b, 0x1db6beeb, 0x3ca0c647, 0xee8b9eab,
-	0x9ee861b7, 0xbdf7887b, 0xefa39a1b, 0xae957c1b, 0x308996e3, 0xea0b7091,
-	0xb307fb13, 0xd4569d02, 0xfd3257df, 0x7e5e109f, 0x84f824c9, 0xf2ed957e,
-	0x671eb713, 0x1a3f844a, 0x8f7c00b8, 0xe8676f28, 0x99d7dd30, 0xa5e59cdb,
-	0xa22ae639, 0x165b6e7d, 0x825019c7, 0x9837dd32, 0x19cbf9ad, 0xd3b4075f,
-	0x9d642f74, 0x89c127ee, 0xa3bf287f, 0x8e9d6baf, 0x460beee7, 0x82073dd3,
-	0xdacf348d, 0xd1fee29d, 0xbff19dfa, 0xc7d5a813, 0xc9d4f0d9, 0xac0e9423,
-	0xabf7450e, 0xdb53f9d5, 0x05bcfd16, 0x9f181278, 0xfccf7d11, 0xfc43ef4a,
-	0xc5f02cc9, 0x4638fadb, 0xc219b5fb, 0x7920d67f, 0x410ddf24, 0xb37a4839,
-	0x0b240a4e, 0xd58e0b7c, 0x865df748, 0x65f7e8be, 0x73f9d6ef, 0xbc2fae97,
-	0xfabf7c2e, 0xe7482919, 0x24ff7780, 0x427bfe9a, 0x1f49cbab, 0x5d6af562,
-	0x6df199b3, 0x10b46c15, 0xabd58dbe, 0xd97d21aa, 0x1638a16e, 0x7e354fab,
-	0x0b7432e9, 0x4b7ffe5c, 0x98737af7, 0xffeb4cf3, 0x3ca5e4a7, 0xdfadbdd4,
-	0x745e50b1, 0xf9087da4, 0xa27a1956, 0x5defebaf, 0x7c86edcf, 0x9614c0a7,
-	0x15da456f, 0xf1a283ee, 0x50cb6ef4, 0x7cf3929e, 0x38139d83, 0x51e86e3f,
-	0x3ae538ec, 0x14fc5f2e, 0xada17970, 0xa2f84ed4, 0x2bc9b8ff, 0x4c7f9ca9,
-	0x4c3e442e, 0xe103203f, 0x89f6fe8d, 0xfe90078f, 0x37c513a2, 0xfa7cbe52,
-	0xd83f8c09, 0xf8b3a7be, 0x115fe457, 0x7d91a4e1, 0x4ecaec2f, 0xc783bdfb,
-	0x7fddf8e1, 0x4af1e8bc, 0xcbc7c3f2, 0x095c698a, 0x787ee9db, 0x1a871e91,
-	0x7bd9178e, 0xfdd1e222, 0xbedf2219, 0x47fbf3c5, 0x78b05f69, 0xf94bd9b7,
-	0xff66c58e, 0xafa404a6, 0xdbc905e8, 0xe91db380, 0x8d24f43e, 0x52a4f68b,
-	0xeef166be, 0xf6a21def, 0xd3125dda, 0x28bedfdf, 0xc7c5177f, 0xb8a5eca0,
-	0x577edfd7, 0x7384bdc1, 0x7053dc0e, 0x477cc457, 0x595f8552, 0xe399957c,
-	0xfb68ef71, 0xcf292b2f, 0xff60eda9, 0x1eeafbd0, 0xb0577f0b, 0xae0f024b,
-	0xf0e788f3, 0xbd0f89af, 0x085a4efb, 0x9eb697e4, 0xf1c4f4b4, 0x017946cf,
-	0xce6171b7, 0xf0b76ebf, 0x7fbdca3d, 0x6b7ad0b0, 0xf388fb9e, 0x126d5569,
-	0x67aaa7fb, 0x794aa0e4, 0x58af039e, 0x9a6b3f48, 0x8accc825, 0x3b73376c,
-	0xffaa51f9, 0x65f859b1, 0xe8d7ef43, 0xbde86e7a, 0x746b0761, 0xd6d775ff,
-	0x17bf3d68, 0xf1a32db4, 0x579a7bfd, 0x7ba03df3, 0x5ff7c7b6, 0x4b5c1f86,
-	0x2b8c52fb, 0xee8a9f6b, 0x7e90df77, 0xc7bfd807, 0x3257c9fa, 0x3cd8f3f4,
-	0x1efd23c8, 0xaf19af0c, 0x7e7d3da0, 0xc43c6ab2, 0xd71e3bc9, 0x8f1180f1,
-	0x8e26c307, 0xfafdb167, 0x285a2eda, 0xfe76d68e, 0x796bf199, 0x872c67fb,
-	0xbe0ef6ca, 0xf83d7aaf, 0xaf1f1037, 0x093bb76f, 0x08f65747, 0x6ed25fbb,
-	0x6a25060d, 0x7c91350f, 0xef8a0ffb, 0x4aaf023b, 0xf740a38c, 0x7e756b7f,
-	0xb7f9d5ae, 0x6367f716, 0xbe8adee8, 0x772fbeff, 0xe2ba11c7, 0xdf3fa351,
-	0x993875d0, 0x8404b8f8, 0x12125a7f, 0x8790c9fe, 0xc6465f11, 0x936f81d1,
-	0x5bb7d73c, 0x52f8bef9, 0x6d2d3fdd, 0xc593df16, 0x51fe8bfa, 0xddff9176,
-	0x8d8de82b, 0xd1ad35a7, 0xd232bbfd, 0xea0fdfd9, 0xc313f878, 0xa8f2e8df,
-	0xe53b001c, 0xb2a897e7, 0x756fc837, 0xe77f342b, 0x63cf8954, 0x2989d53b,
-	0x194beef1, 0xce3a9be5, 0x28cbea37, 0x43fd864f, 0xc88eedce, 0x998dfc7d,
-	0xcd54af02, 0xcf240391, 0xb2cf7d88, 0xfbb8aca2, 0xba44c81e, 0xd77b18df,
-	0xee45a64f, 0x391db47b, 0xf23f67a4, 0xf7495e3c, 0x859b6a8c, 0x8d9be87f,
-	0x8e10a6e3, 0xb5c5c607, 0xed20d6cd, 0x4f516a4f, 0xd2307bf8, 0x76bfb20f,
-	0x07e91169, 0x991c1bee, 0x3a72cf48, 0x2ff5c4aa, 0x8e38c36f, 0xfb2f2fc3,
-	0x2baaf58c, 0xf91bac5b, 0x1f6f1996, 0x6a1fec61, 0x6a9c092e, 0x7a51af3c,
-	0xd3511f78, 0xb749ee2e, 0x5c62fa1e, 0x7fdbd216, 0xadc63fe0, 0xa64172c6,
-	0x25adbf88, 0xbee98fa1, 0x6cbbe7cf, 0x90e8f171, 0xd89a97bf, 0x3dcc6a0e,
-	0xf6578c19, 0x859c2e23, 0x4fedf37e, 0x7ad1df79, 0xca4ee128, 0xf1adf5c7,
-	0x837e778f, 0x13601a9c, 0xd04ddae3, 0x9ee125c4, 0xd6b81c48, 0xdd0fee29,
-	0xaa49c7ab, 0x7d7a8c3f, 0x505df62f, 0x03eecf14, 0x2349e65b, 0x1bf0dded,
-	0xafbebad5, 0x85b1d82f, 0xf163e08e, 0x476eb551, 0x2e39fc88, 0x1ba2e2c6,
-	0xb4f5a333, 0xc644ede1, 0xb25dfdb9, 0xc8c47293, 0x268c5fd7, 0x7ef887dc,
-	0xeb3c9c42, 0xf65ebaa7, 0x0dbee7ea, 0x9be665b3, 0x0d288e69, 0x63fc851c,
-	0xe93fe97d, 0xcb1c5208, 0x04caf83f, 0x9dfaff92, 0x2445e7d1, 0xdfdf3f3f,
-	0xaafcb20a, 0x433e7643, 0x3a5fda32, 0xd214caf8, 0xbfb786b3, 0xf97211cc,
-	0xbee2c722, 0x29467d3c, 0x6bff6249, 0x77fec492, 0x4c93d2af, 0xfddaaefb,
-	0xfef22fb2, 0xbbe721bc, 0x4501fd75, 0x65d7f3ec, 0x686f5caa, 0x3a617a17,
-	0x7f9c4a20, 0x98f3c8a5, 0xed11fe79, 0xdf2fa825, 0xe880b710, 0x9ad7d942,
-	0x6aef5807, 0x9e989a4f, 0x198393da, 0x05ef11d9, 0xf24cdc68, 0x801b0d7b,
-	0xc81d88fd, 0xefa52ebf, 0xf4beb10f, 0x59c604fd, 0x523c2647, 0x64adce29,
-	0xc0f5bf20, 0x239355db, 0x3d05fffd, 0xc1f103ee, 0x09e72843, 0x87cebf31,
-	0xcf42b04d, 0xae3d0813, 0xee2c71d2, 0x8ec89aaf, 0x5757f763, 0x0e1b938a,
-	0xc7f28158, 0xf9581fb5, 0x07e7d03e, 0x1dfef2d6, 0x9327f92e, 0xffbf019f,
-	0x381f2a6a, 0x3d3276b8, 0x7de0fcff, 0x53de7357, 0xaf9514da, 0x1e7d1008,
-	0x797f51c2, 0x97c276f7, 0x90e30a5d, 0xefd3aea2, 0x9eeaf9d2, 0x9b7f3356,
-	0xc677bd59, 0xc22481e3, 0xe94b454f, 0x9d3d9dbb, 0xe21feb0a, 0xd947032a,
-	0x289d4719, 0xe3851c66, 0x165c82f8, 0x71a4ab1f, 0x5314944f, 0xc9db0937,
-	0x1c274d9f, 0x55c618e5, 0x9cff3d06, 0xdfd9f829, 0x13f9c091, 0x3d082609,
-	0xba28ec83, 0xcebeb437, 0x9b436438, 0x86bdf51c, 0x4ceedef1, 0xd7b0ae71,
-	0xa490b3d0, 0x16ed1eb1, 0x3db686e5, 0xf58eb419, 0x49eb10e6, 0xb459b343,
-	0xd02512ef, 0xfe0ccdf9, 0xfc4038d8, 0x508f4639, 0xc12c4b2e, 0x77db84b1,
-	0xea079d0f, 0xe28239f7, 0xe7635d5e, 0x686efe44, 0x3b8f73b0, 0x4e39fc5e,
-	0xda4833e7, 0xcfb12cd1, 0xf3af6d89, 0xd1c67c88, 0x1e2fc233, 0x1c9fe85d,
-	0xa0063fcf, 0x25fbec44, 0xe6ad7e5d, 0x86e7788a, 0xdf223d1b, 0xe06c73b4,
-	0xef71e928, 0x373e04ee, 0xfc8975ec, 0x974b696c, 0xac9fdf42, 0x5066956f,
-	0xfb9f5a3c, 0x829f7f1e, 0x83f662f5, 0x6e7cfde1, 0xbbbcdd5a, 0xc7438b5c,
-	0x1f111eb5, 0x01dfe897, 0xbd57d08f, 0xd37814fd, 0x23da7df5, 0xaa735e74,
-	0xdf14ecd2, 0x4aef8999, 0xf9fdd06f, 0x199bd78d, 0xd5029d37, 0xc43fce2c,
-	0xdd32c539, 0xfba0df2f, 0x3bdf11f9, 0xe99b033f, 0x7bf6229c, 0xdfafc367,
-	0x02bf8fac, 0xf6371e34, 0x759bf5bb, 0x2fb3783c, 0x4ca5f9fa, 0x40e6071d,
-	0x10f3f90e, 0x1fbe17c6, 0x71c09791, 0xa4e1697a, 0xbe8338b8, 0xeff55703,
-	0xe434a9c0, 0x1ef790de, 0x1da3bfc7, 0xdfcd7e67, 0x80499c13, 0xc5ce7109,
-	0xe19fe386, 0xf2126e3f, 0xaa2dcfd6, 0x4346829d, 0x077017ee, 0x331f9916,
-	0xe7463ee4, 0x3df1ffff, 0x22505ca0, 0xcacf25f3, 0x3a1e31fe, 0x32f5b09f,
-	0x7015c6fe, 0x8d75c41c, 0xce35d7d3, 0x2edf111a, 0x571d5a8c, 0x97d7877f,
-	0xc471101a, 0x9e4765cd, 0x75627195, 0xfbefe248, 0x5f62c3aa, 0xf6265d5b,
-	0x02ad39b5, 0x49bcaea7, 0xbb126a0a, 0x9f44d3c3, 0x6ccb3fa1, 0x7a180f02,
-	0x5d2fc432, 0xf09da87f, 0x3e3a0dc1, 0xc9a3d588, 0xf94e5dd0, 0xc9345be6,
-	0x472af74b, 0x6abf3f7c, 0xeee4ebda, 0xa83fa72f, 0x22effc6f, 0xf7d1eac4,
-	0x0f12fe3d, 0x07bad3e5, 0xb8e21657, 0x38fef347, 0xe6a6f48e, 0x2df37632,
-	0x3b13888f, 0x7ca3811d, 0x3f45a4df, 0x6bc96fef, 0x747e21eb, 0x5ec7e302,
-	0x3a96f757, 0xbcf9ab81, 0xc09c3abf, 0xb75643df, 0xb0bbf9db, 0xc486d6ea,
-	0xdb7fe429, 0xeb1daf65, 0xcb27ad95, 0xc5959f88, 0xad4a3ee2, 0xb38bdc5d,
-	0x10b7fdb9, 0x3b7bd77d, 0x2df9cfa2, 0xfba8bf3d, 0xf58f3d06, 0xa3091b6b,
-	0xf9f7ffa5, 0x5f3a8d9b, 0x662ebaea, 0xfea9c14c, 0x26afe690, 0xfd7fec7d,
-	0xd71d0b45, 0xa5794ed5, 0x6d88ae9c, 0xefdca8f4, 0x268ee6fa, 0xf41af34a,
-	0xf93a6477, 0x707351f9, 0x82d2e32c, 0xd30fbb2b, 0xa98dffb0, 0x3afaa714,
-	0x225aa6ba, 0x0eb7bbf4, 0xf91c73fd, 0xb7498035, 0x494b855b, 0x25e3a15a,
-	0x07b5c761, 0x3e50670e, 0xb7ec97a2, 0x9277ca80, 0xdeacb1b3, 0x12792a7d,
-	0xa2bd96e1, 0xed19c21c, 0xa503f732, 0xa4e6e727, 0x3336fa48, 0x6242177d,
-	0x9c9e801c, 0xdb230b1b, 0xdb5fff1b, 0x27a4d3ff, 0x289eb6d5, 0x84f837fb,
-	0x3efe7cbb, 0xcad07037, 0xbce808f7, 0xc72115c6, 0x347f7457, 0x644b370b,
-	0x7ce873a7, 0x3b41227a, 0xbaa0ee05, 0x95256102, 0xb2c38bce, 0x96377fb8,
-	0x7d4cf7fd, 0xb84a59fe, 0xcee9ee83, 0xe737cfd1, 0x5bf73742, 0x6a5c0300,
-	0x8befe4e0, 0xe5cbc04b, 0x29785b6c, 0x5082f1c1, 0x099fbf88, 0x73ae2867,
-	0xe63bfd36, 0xe61ef238, 0x0ce7029b, 0x0e74c87e, 0xc51bee26, 0xd75ba7ae,
-	0xf09a59c7, 0xe81d043b, 0x086cee7e, 0x35fbb9f1, 0xbf9fa3d0, 0x3cc75fc7,
-	0xb9d1f7dc, 0x3b6835db, 0x208fcc89, 0xeb4f9ff7, 0xa7ade391, 0x198b2967,
-	0x9f449cca, 0x7d30ce14, 0x75f2bf6d, 0x4d6dd3f4, 0x35df57ca, 0xe283f7d0,
-	0x6f4b73e1, 0xd3ef1bfb, 0xd349627d, 0x97b1bef8, 0x7da6c7be, 0x1de9584e,
-	0x001363f2, 0xe6b3ddfe, 0xc66f6437, 0x07e01af7, 0xfb11e7be, 0xf72d06bd,
-	0x3df0c67c, 0xedfee335, 0x950ae0ce, 0x72ac6fee, 0xaddff8db, 0x9b8db229,
-	0x87ca794e, 0x21bffcd2, 0x6a40fabd, 0x2883c49e, 0x638c19c1, 0x83b2bd75,
-	0x2fd69b36, 0x22f7c669, 0xf432fac0, 0x006401ef, 0xb763b77f, 0x1e69ef8a,
-	0xa5b43d41, 0x74abf6b2, 0x2e1e1a0f, 0x6f2f0955, 0xf4bcd971, 0xe895ae5d,
-	0xdbd30fb5, 0x2ff71368, 0xb16bfb8c, 0x19b46c7c, 0x8daf4a79, 0x77cc7671,
-	0xfcda773e, 0xbfe89bff, 0x9324a93f, 0xcbfe6070, 0x3f7c3df3, 0x7758c129,
-	0xc3eb8d89, 0x37191af7, 0x6a7dd136, 0x1d31aba4, 0xe1e21ef8, 0xba149ca4,
-	0x25d8d51f, 0xa63753ee, 0x9b7fd807, 0xf3fb12fd, 0x4ed2cec6, 0x0e83078a,
-	0x6eabdf0b, 0xaa34f974, 0x4421d207, 0x3ef89ffe, 0x69bbe0df, 0xfd21ef98,
-	0xed91505e, 0xde5157d7, 0x4a1b9a7f, 0x6169bde9, 0xc0f1126d, 0xe5061ef8,
-	0x4e9519e0, 0x7befa3cf, 0xfbe4e281, 0x501c8617, 0x9d995831, 0xb90d7cba,
-	0xf8ef8d38, 0x3bea2535, 0x8f5e437e, 0x98b90a24, 0x44cc26e9, 0x71a5577e,
-	0xf061e563, 0x8f00bffd, 0x30b1ae40, 0x0030b1ae
-};
-
-static const u32 xsem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x243bff00, 0xa3f0c0c3, 0x4aef811e, 0xf1303031,
-	0x12d18aa2, 0x6064e3ef, 0x6062e010, 0xfbe20530, 0x330c0c3c, 0x204cf480,
-	0x6066e516, 0x1ae20310, 0xc40dde20, 0x19f8807b, 0x1039fc50, 0x1be200ef,
-	0xbefd103c, 0xfe0c0c4c, 0xc4081c40, 0x95fc40c1, 0x1be18181, 0x73f6f103,
-	0x4c30330a, 0x2ff04715, 0x249fd903, 0xc1ffe7e9, 0xe90c4386, 0xa071df6b,
-	0x10acf37d, 0x7b20467c, 0x9aaa15be, 0xcdf85605, 0xbf268858, 0x18bf8d08,
-	0x0372fe8f, 0x4d5afe54, 0x81b5b334, 0xcd4909e9, 0x6efc4d3a, 0x40aac741,
-	0x3101a9ff, 0x5ff1ad00, 0x000368ca, 0x00000000
-};
-
-static const u32 xsem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd5947809, 0xe77df0d5, 0x9926665d,
-	0x6c81bc99, 0x44d84eac, 0x4242740b, 0x61db101a, 0x8311688b, 0x9817054b,
-	0x264f6408, 0xdac7f520, 0x0040cfef, 0x8b435151, 0x03b45a35, 0x341b0504,
-	0x024180d8, 0x2d82e00e, 0x5d6ad8d5, 0xc8a0d2da, 0x1b80931a, 0xcefc5dfe,
-	0xc9bef739, 0x82264efb, 0xf5ffffb5, 0xf8f8fefb, 0xf77bee5c, 0xce73ddb3,
-	0xe28ef73d, 0x8b94c718, 0xff12fb18, 0xdd98c7be, 0xd71b18c6, 0x2356329d,
-	0xcf2d4ad2, 0x03d058cd, 0xac62ccff, 0x9785addc, 0x653633a7, 0x5ef91a87,
-	0x4837e412, 0x6de43b61, 0xde549d7b, 0x23e79ebe, 0xa0cfcd6e, 0xc83aa3fc,
-	0xdeded04b, 0x5065c0f2, 0x6643b9de, 0x91dbb11b, 0xc2963671, 0xe30731d8,
-	0xcf90597f, 0xc9c0ac66, 0xf61be5b3, 0x45f6c5cd, 0x84e6764d, 0x1577cafe,
-	0xf20cbcce, 0x86550785, 0x2f37ca55, 0xbe43fad3, 0x60352c38, 0x9f3263be,
-	0x1ca7685f, 0x3bf50cde, 0x37292d3c, 0x553b18b8, 0x8d5e60e5, 0x4b776ab1,
-	0x18a3f5ca, 0xcf6f092b, 0xf52576c5, 0x3a970f92, 0x97e6c765, 0xb6bae1fb,
-	0x97bb3e4a, 0xf12dd2b1, 0xcf923bcc, 0xfff84be1, 0xf91ca358, 0x862f941e,
-	0xb7e83275, 0x32e4d590, 0xab5fc719, 0xf0dddd79, 0xd3a5553b, 0x7cbe4638,
-	0xed038c2b, 0x7c969e2a, 0x1b0ac4b8, 0xf8c0340b, 0xb39cbbed, 0x7d70b937,
-	0x6e11b4cb, 0x1addd75c, 0xe70c2bd6, 0x717a74ef, 0x5cb41b7e, 0xbf592f28,
-	0xd5182b41, 0x96e95fdd, 0xd579d6be, 0x980d4d0e, 0x53d3a3ca, 0x47798c55,
-	0x184be774, 0xbf4037f3, 0xb36b094c, 0xff7f7746, 0x96322580, 0xcccbfd8c,
-	0x1feee8eb, 0x43df4920, 0x013fc16f, 0x6e3da15e, 0xb781ab82, 0xdbfc3ac5,
-	0xb3b78ddb, 0xd2a3c0ba, 0xdfee6d99, 0x3c401f48, 0x106a7cc0, 0x11ae904e,
-	0x644cf3f3, 0xdfe81493, 0xc4ba67e3, 0x918f5f7a, 0x9f2ca8d6, 0x420b58c1,
-	0x78cafda3, 0x116c6bc8, 0x93f631f3, 0xa9fed915, 0x059fbf90, 0x57bce2e6,
-	0xc4228148, 0x690d6313, 0x24abbf48, 0xffd71b36, 0x94349c03, 0xf407eaaf,
-	0x99af7009, 0x9649bd96, 0x3093dcc4, 0xbdc4f05f, 0x214fd4e9, 0x3f42a3f5,
-	0x8fdfcf43, 0xe9639b9e, 0x322dcf47, 0x7ea4a9fa, 0x4fd6179c, 0xeb04ee4d,
-	0x8c4b727c, 0x7ea4ee7e, 0x2eb617dc, 0xd6898afd, 0x46515cf9, 0xf54e24fd,
-	0x97d400b1, 0x2d607a0d, 0x5dca197e, 0xef6389f5, 0x98ba6665, 0xdff912bc,
-	0xa6625c0d, 0x389c848b, 0xfa261d0b, 0xd0f258fb, 0x5bec7e93, 0x44830f22,
-	0x5f1a3512, 0x5c91afeb, 0x41dfd498, 0xbbfa3bf9, 0x31dc2e48, 0x0eb17021,
-	0x59b1c0f3, 0x816bc83f, 0xe831eb6f, 0xb129e61a, 0x36bd4c34, 0xefcba34c,
-	0x261c3956, 0x88dbf80f, 0x683ed023, 0x08911ceb, 0xa4d2f5f9, 0x365c205f,
-	0x27c11b33, 0x5895664e, 0x48cece2f, 0x9e9ddd3e, 0x826429bd, 0x8041ead3,
-	0xdfbba97f, 0x0d206ad5, 0xbb2b6be9, 0xb6f48421, 0xa7ac106a, 0x854f633f,
-	0x14848fae, 0x20a83f68, 0xd769e10d, 0xe3cdbf80, 0x28fe306b, 0x1c19ff1a,
-	0x3f8e0777, 0xf6f8e7ae, 0xf1963921, 0x2c8b831d, 0x18343be3, 0x177de81f,
-	0x0f8c55bb, 0xd8c09bf0, 0x685ba1f3, 0x22e0fb7c, 0x8d6eff1a, 0x8fc65915,
-	0x05ff1aeb, 0xdea5f71c, 0x82643fd6, 0x4b83fd75, 0xf8d7ebac, 0x0b655ffa,
-	0xb471f8c5, 0x16875ffe, 0x2e0ff5f0, 0xf3b7ebe1, 0xf7c6bb7e, 0x75ffc174,
-	0xdeadf71c, 0xa2743fd6, 0x9517fd75, 0xe76fd759, 0xcacbbfe3, 0x1a2ef8c5,
-	0x1950bdff, 0x6545ff5f, 0x0f66be34, 0xb48e90f8, 0x61957101, 0x040d9f18,
-	0x19254886, 0x6474a7e5, 0xfda0c61f, 0xe084363a, 0xa71c4770, 0x80e2cfbb,
-	0xf2dd5cde, 0xa381858e, 0x08559e40, 0x9fad2f9a, 0xa59ca1a4, 0x0b7b9072,
-	0x341754c5, 0xb0dfb4c9, 0x70f0f675, 0x937b6f98, 0x82fcc21c, 0x65879775,
-	0xbcd8efda, 0xb0a76c3c, 0xf0ff7e08, 0xcd1bd1a1, 0x174e8aeb, 0x5ac7a8d6,
-	0xe7c47c2d, 0x46cc9a13, 0xa6fcc256, 0xeb8c1121, 0x39031fce, 0xbe7e40ca,
-	0xd314720f, 0x078c2ae3, 0x9c828fdf, 0x6f999a65, 0x3c7df196, 0x991cdec4,
-	0xff827282, 0xbc38531d, 0xc2912d8f, 0xd6cfff08, 0x3e50d22e, 0x0789ac2d,
-	0x23cf77a0, 0xb9d4f028, 0x28de1ecb, 0x08bd3c11, 0x15891b9f, 0xa033fb19,
-	0xb6801fb5, 0xa5afb6b0, 0xbc2c2ddd, 0xcfea0d32, 0x483f935f, 0x3cdff587,
-	0xc6563edb, 0x07f983fd, 0xd98f88d8, 0x630e5b00, 0xaad71bb3, 0xe3732003,
-	0x56fdf56c, 0x0139fb53, 0x22e6fe6b, 0x0d5dbe6b, 0x37d436ab, 0x01b6258a,
-	0xd2b5bdfa, 0x938c6e5a, 0x78e1f528, 0x20fde315, 0x56f7cf85, 0x67e2c74c,
-	0x573af09d, 0xf98d6de7, 0x5952ef04, 0xd6cbf684, 0x4ff84664, 0x9d017aa6,
-	0xbe7a3baf, 0x3f875573, 0xf733e60f, 0x19e0994e, 0xbdd6ff3d, 0x18db7ef1,
-	0x563f6b48, 0xd7a30491, 0x79ff3d13, 0xa3d7a34b, 0x1f961e93, 0xe9cefe8a,
-	0x829e9a24, 0x1efa934d, 0x6f2bd535, 0x51efb2b8, 0x6e957d13, 0x17c96599,
-	0xea58e787, 0x5be6d617, 0x14d617ca, 0xafe7ca5b, 0xe7c9645e, 0xd4b4ee87,
-	0x9974b79f, 0xcad6fca5, 0x37e52c7b, 0xe4b5ad17, 0xb11e04e7, 0xf671bfd4,
-	0x6db94b06, 0x20d725ef, 0x25bf551f, 0x3e37dc33, 0x007b1d75, 0x5d4fc1f5,
-	0x71f10f8a, 0xf88d2aa2, 0x979554e0, 0x4ca6f6d2, 0xc1cb8047, 0x16715402,
-	0xad086b2e, 0x9972889e, 0x5e2cfc91, 0x1a1433b6, 0xe4adda08, 0xb5c9f825,
-	0x09008b1a, 0x174fac4b, 0xa6ca771d, 0x94f3d6f2, 0x67a302d7, 0x5b972cf6,
-	0x6e0f7f63, 0xe508bfcc, 0x00f26f4e, 0x3ee006fe, 0xf7f621d7, 0x8932f2e8,
-	0x33bf99e5, 0xfcf89cb6, 0x65b3909c, 0x6507971a, 0xcc9bf6cf, 0x8c8f983c,
-	0xf1aafca8, 0x28a8001a, 0x4f3b5127, 0x2e007a46, 0x50cbd0b0, 0xedb77f0b,
-	0x155e6993, 0xa3c61328, 0x235bc9c8, 0x1c899ca1, 0x68dd7c18, 0x7eff879c,
-	0x29aef909, 0xb6f5f699, 0x8f7de9aa, 0x3c9f882a, 0xcd544f4a, 0x5558f4a6,
-	0x55a3d280, 0x5fbe9445, 0x6b694955, 0x0f4a52d5, 0xfd288557, 0x4a6ad553,
-	0xa1aaabdf, 0x5aaa9df4, 0x1550ff4a, 0xcabdb4a6, 0x0fc1a94f, 0x4937f25d,
-	0xaec2abe8, 0xf2879d80, 0x565ac567, 0xe216dd40, 0xf21a5f73, 0x67d759f9,
-	0x3f1f5023, 0xa19d8efb, 0xbc1bdfbe, 0x77ade9a2, 0x5f49fa3c, 0xfe030829,
-	0x3b967b33, 0x9c9e38e3, 0x819d3636, 0xf867ba3c, 0x46dbbe13, 0x92415e51,
-	0x37c90d81, 0xdfa31dcb, 0x75f08c61, 0x7f313c3e, 0x016b98e7, 0xfd1ec71f,
-	0x7bf6366b, 0x717fec4e, 0x87da6407, 0x0f936459, 0x1b8265f1, 0x3b9d6bed,
-	0x0f3fbc84, 0x82ea3efc, 0x0660cb5f, 0x274904e9, 0x68db3bfa, 0xb1c20a67,
-	0xc40c3e39, 0xdc1ececf, 0x5c7e41e4, 0x8fd3669c, 0x918380c6, 0xeba43796,
-	0xd3fef32e, 0xad9fcd64, 0x9037a691, 0x5c26f63c, 0x4ae91a3f, 0x430e8fd7,
-	0x6a51a7fc, 0x4d38b3f4, 0xbf028fd3, 0x3432da9e, 0x61dfef81, 0x27d60fbe,
-	0x5d82bd12, 0xd5fff548, 0x1fade9f3, 0x358c3e63, 0x281c0fb2, 0xe86ca00f,
-	0x1e9dedf9, 0xd13e5778, 0xcd5f10f2, 0x2fa867ea, 0x5fffc1c4, 0x157ec10e,
-	0x06fd1bca, 0xfd90e41b, 0xdebdf8db, 0xf3b41e32, 0xb637361a, 0x156e9deb,
-	0x2ba0cc76, 0x1a1a5790, 0x3a2764cb, 0x92beeb75, 0x9b07c968, 0x7d96e9fa,
-	0xfc01ff06, 0x4152820f, 0x541329ba, 0x56b8a1d4, 0x23bf304b, 0x2f013f28,
-	0x2bd78941, 0x016ab477, 0x0b63912f, 0xe5b719ea, 0xbde77418, 0xef208ff1,
-	0x6546fe4f, 0xdff962f7, 0xae505660, 0xf720c51a, 0x2f9f906c, 0x9635b772,
-	0x77b940ce, 0xf9f7c6d2, 0x83cf2c05, 0xab114f46, 0xe73d46c9, 0x8e9b6623,
-	0xfb11fff4, 0x64d3279d, 0x1a6cf86f, 0x6afe73ad, 0xfa0b3eeb, 0x585f2599,
-	0xb017cd6b, 0xde90536b, 0x2ca9d60b, 0x5a5f212c, 0x9d36bdcb, 0x95642dfa,
-	0x41dec8ab, 0xbdc6057b, 0x00ca674d, 0x73f95f98, 0x43e7658f, 0xae363bfe,
-	0x7bf61ba7, 0xff3e1f71, 0xe6b0a492, 0x1a0ff287, 0x19707f33, 0x55e1f6c3,
-	0x6e42a728, 0x7accdbe6, 0xceebefe2, 0xc6be7a3f, 0x8fc3d27e, 0x6f21e620,
-	0x18e1fc91, 0x9b34da76, 0x10adf424, 0xbae037a5, 0xbe6b7a4d, 0x2f918380,
-	0x19dfca8f, 0xe9a7ff95, 0xe859892d, 0xc81488ed, 0xfa7325b7, 0x52417d42,
-	0x37c0b53a, 0x47ad3fe9, 0xd2ffe5ff, 0xff4207fe, 0xeffe96d9, 0x3ff697fc,
-	0x57fcc7ac, 0xfcbfeac6, 0x433b6db9, 0x9e4a6f20, 0x60c3c879, 0xd4a93a1f,
-	0xef00f8a4, 0x7a579b65, 0x284e0e90, 0xf3d20f21, 0x3d3cb0c9, 0x46ec3d16,
-	0xa23f207a, 0x5da125df, 0xfe84ff85, 0xdf753d4f, 0x3e67dc4c, 0x64eaacdb,
-	0x47b16d2f, 0x15afc0ec, 0xd833c58d, 0xe11fca18, 0xc8cfbbf9, 0xd2b26f98,
-	0x0f93c967, 0x0dffa0a5, 0x13d84528, 0x2a97d211, 0xc5cc3eea, 0x3ac8287d,
-	0xdba2cf89, 0xfae7f8e1, 0xd7cc7c90, 0xc3967a12, 0x0fcf493c, 0x1b04b80a,
-	0xa3233bef, 0x72b593ef, 0xfd54683f, 0xd4ffa122, 0xc749dcdb, 0xdf6274c0,
-	0x7941df61, 0x8583c069, 0xbd53feb9, 0x4731e1f5, 0x756d3e60, 0x2648f1bf,
-	0x767c1938, 0x2ffe61b6, 0x2ef6f79e, 0x9d85db8f, 0x4c2eddd7, 0x424dbced,
-	0x69e66b6f, 0xa0f11a99, 0x41b65c5e, 0x73e085f5, 0x4f4db6d9, 0xea768a3c,
-	0x70df76bb, 0xdb74bfe8, 0x00987f4b, 0x6aedd2f9, 0x0cbe0cd2, 0x8dd29497,
-	0xbffc2097, 0x1e376c74, 0x92f57e4a, 0xbfcd1de6, 0x374fb8ff, 0xefb74a3e,
-	0x9ee8d8d3, 0xb0d298f0, 0xc5756b4f, 0x91c34bc0, 0xaaafd45c, 0xa1ae7eb7,
-	0xaf72793d, 0x63d352c4, 0x4bc373c0, 0x9c2027a4, 0x4f028f08, 0xaa8b785d,
-	0xa0bc041f, 0x14f0373c, 0x9080fe5d, 0x779fd83f, 0xd3f3d114, 0xf95fa3cf,
-	0xd70fbb3d, 0xedf4f45f, 0x71c75c1e, 0xf5d392a5, 0xfc532b63, 0x1a916e30,
-	0xe529d14a, 0xff1e8bdf, 0xe15bd121, 0xe14c3f1b, 0x9fbfa0f6, 0x50a6f68d,
-	0xc2df5c3f, 0xfad037f5, 0xe880580a, 0x3931e8ae, 0xa7e90c2f, 0x3dbe9b0a,
-	0xc8645f06, 0x6f8e2f9c, 0xd60b8504, 0x12ed1c77, 0x4efeb3f4, 0x7f266f0e,
-	0xfc8622c8, 0x3fc343ff, 0xfe5316ce, 0x93c70753, 0xbe09b643, 0x4ccf6d02,
-	0xb77775af, 0x0d4e7e20, 0x1fa2a7f2, 0x9094c82d, 0x25f48780, 0x31bf2bf4,
-	0x87e3952d, 0xd16c9579, 0x2980f40e, 0xb7eb1df8, 0x18e77ea8, 0x65f63b4b,
-	0x4bf8f77a, 0xef30f8c4, 0x8fbfdc38, 0x86a2b0a7, 0x55bbeb18, 0xf61ef836,
-	0x997d1371, 0x7bf39bf8, 0xbf9c3ddd, 0xcf0f7e0d, 0x9fe58e9a, 0x07f9c9bc,
-	0x08fee1db, 0x52a48af3, 0x25ebbef9, 0x16760792, 0x75d7c589, 0x6b6be0aa,
-	0x302741b9, 0x304a456f, 0xdff60bd1, 0xfe4fe087, 0xd07582b3, 0x832f24ce,
-	0x67a79e38, 0x16df067f, 0x251ffe0a, 0xad9ff95b, 0xbbdf7ce7, 0x7da2157e,
-	0x3f0d4cae, 0x2bf228f1, 0x8bc867f0, 0xe1e6aafc, 0x1fd74fba, 0xc04dc3f8,
-	0x0c1ba7a7, 0xcfcab53e, 0x7a2d3e68, 0xf484b376, 0xa7a7cd19, 0x891b408b,
-	0x3df0a7c5, 0xb5169f26, 0x9f953ffe, 0x8faefc06, 0x0f219f82, 0xb463837b,
-	0xf3633c3c, 0xe5a33c12, 0xc9bdfc21, 0x9fd27bb2, 0xbd067741, 0xfcb2fc95,
-	0x1817f222, 0x5dd06974, 0x741a5d17, 0x62ffc3d7, 0xf9745f81, 0xa005a460,
-	0x2a5dbc93, 0xcd6555d9, 0xda0c3cfc, 0x8b203cbd, 0x6da7e4e0, 0x3cbcd58c,
-	0x0f9cc920, 0xa21be547, 0xf2a3fbea, 0x03f55179, 0x4b4af951, 0x03a6b2fd,
-	0x47fc231a, 0x4becf52c, 0xc41f651f, 0xfd8c87b0, 0x4678d826, 0x0c5d210b,
-	0xde50d4ec, 0x0541cba9, 0x1ee0ff45, 0x0ec5ec99, 0x182af180, 0x3d3ea3a7,
-	0xb1b9021c, 0xf0edc9d2, 0xd3d3bd0e, 0x8995d207, 0xac99df3c, 0x67b942ad,
-	0x7274ef7c, 0x5e47473f, 0xe4d127a7, 0x2cd238a7, 0x0d6edc93, 0xfcb1e9b3,
-	0x10a3b020, 0x6f595bde, 0x39ffdce5, 0x5e0d764d, 0x8d68f68a, 0x771343ec,
-	0x3d1bb2c1, 0x68e92ae8, 0x6ccd7a1e, 0x55f0bef8, 0x3a558e99, 0x70633ce2,
-	0x57e42c5e, 0x89ec99fa, 0xb3f42c13, 0x6ccfe889, 0x82c576e6, 0x08fa5135,
-	0x54f4435b, 0xa1a25ae0, 0xe03b053c, 0x973fab7d, 0xe88945f3, 0xb5bd68af,
-	0x278f68dc, 0x95df685a, 0x03cb59d4, 0x65da3ec2, 0xcb0649f0, 0x86833920,
-	0x42e7da0f, 0x47934f2e, 0xf01b335d, 0x665071d1, 0xb6799e78, 0x9c7c2659,
-	0x97e7e7ad, 0xfc4c942c, 0x493ac156, 0x6a701a1e, 0x7ad27e43, 0x3b6d5797,
-	0x177d9cfe, 0x3fcecdd2, 0xa439f98e, 0x1ddf3b6d, 0xcff31bb1, 0x8ff83dbd,
-	0x29fd67ac, 0x37e49d7b, 0x26ebd8ee, 0xf3d8ef7a, 0x6177c1db, 0xfc9d977e,
-	0x3f7b1d75, 0xd7f4831f, 0x845edcb1, 0x1063aef2, 0xf7aa87b7, 0x95a63e7c,
-	0x8415d7f6, 0xc6b2a3b7, 0xbfe6a3f5, 0x3092961e, 0xdea15585, 0xf89e37b0,
-	0x93bcf829, 0x7b1d0bfc, 0xb80ecf3e, 0xa9eb75fe, 0x1d39e710, 0x59fb366e,
-	0xf7225f9c, 0x8f770783, 0xcf0cb4df, 0x69f71ba3, 0xca7ca1f3, 0x831f7f0b,
-	0x59e3b472, 0xabb50fae, 0x79e38fad, 0xe1fc8745, 0xdce01532, 0x9fd54c8e,
-	0x1194fbb1, 0x62a34393, 0xe4efe5c1, 0x7850b937, 0x4fb70a68, 0x21e1fdff,
-	0x73bcb9f9, 0xae121d87, 0x7fc38bfb, 0xd7b0b944, 0xac69744e, 0x32c374f7,
-	0xb7ce57d2, 0x7fcae1ee, 0xd0b83a17, 0x0b914b75, 0x7fd4f759, 0x5aff7c73,
-	0xa2fcd2f6, 0x9d27a0f9, 0xf283b9ef, 0x9a3edcdb, 0xfbd205ef, 0x7869ff82,
-	0xeef0167f, 0xabbaff39, 0xddd7cdff, 0x9d5fde3b, 0xe3aef02b, 0x85f07f79,
-	0xbefcd3bf, 0xf4db9cae, 0x0dee94df, 0x9b15febd, 0xa80ccdf7, 0xb8d59d3f,
-	0xb2b8b150, 0x19abff7c, 0xc0cafa50, 0xdf388903, 0x37e751c9, 0xc2a6fa46,
-	0x92c9a6ed, 0x9641ec8d, 0x907b0928, 0x840351db, 0x496030fe, 0x0321e901,
-	0xf5cfde06, 0x0ebbc506, 0x195f1fcf, 0xb147df3c, 0x3bec6c14, 0x97ebcc01,
-	0x9ed5bc8b, 0xfcc4b9fc, 0x603a3478, 0xa20ff7f0, 0xa0703b5e, 0xa42f7a4c,
-	0xe8beefa4, 0x97bfce99, 0xe7bb1669, 0x0ed5af4a, 0xdab24dca, 0x7f45534b,
-	0xff9f18d3, 0x0e149734, 0x0f261c03, 0xfa1269fa, 0x570f2747, 0x5cf90499,
-	0xf6815816, 0xb59754c5, 0xc33c06bf, 0xe1cdf719, 0x380d5768, 0x8797590e,
-	0x93241c70, 0x70bcf49f, 0xdc1379c4, 0x2f18c232, 0x871f14c3, 0x1f729f63,
-	0xbd859df9, 0x904d474d, 0x5aab5c57, 0xb4159f90, 0xc81c3997, 0xe5ec36ce,
-	0x84cde0de, 0x2188adfd, 0x032bf80d, 0xdad3bf65, 0x06dfd91f, 0x3e2ebe5e,
-	0x537e3c0c, 0x851bbcbc, 0x45ae8197, 0x74ebf20a, 0x62fa17b4, 0x1f9e0cfd,
-	0xdce85218, 0x570bd84d, 0xa4291778, 0x50cc0cf7, 0x8e855f10, 0x1cf0aba6,
-	0x6893e1c4, 0xd9b7171e, 0x64707f68, 0x91f70449, 0xdfe50ab5, 0x10e3e9b0,
-	0x7b2f33df, 0x0c9df4ee, 0x8d7ee6fd, 0xf1e53dc7, 0x7dbf8ff3, 0x8c44e5f9,
-	0x2c781417, 0x46afff84, 0x167aff3f, 0x2d380389, 0xa1285854, 0x25bdfa0f,
-	0xefc5bef6, 0xdfe3cd6d, 0xfbba5377, 0xdefd5f39, 0x3abfcae4, 0xd8e40e7d,
-	0x5df300fb, 0xe1a30e98, 0xfd5db315, 0xaf0e669d, 0x1e1621e0, 0xe42ae3c2,
-	0xe139d33c, 0x9ffe821d, 0x99b3d3fb, 0xea4ed768, 0xe5c09518, 0x17b230eb,
-	0x385ec282, 0x3e09bccb, 0xa1d7ca17, 0x79fe7409, 0x8ac77650, 0xec2adc2b,
-	0x7c625fed, 0x751da409, 0xfb4646ac, 0x1f92758d, 0x60e75437, 0xb7c4639b,
-	0x9f86abe4, 0xfe0de04a, 0x8f3c6ce4, 0x842fe3e1, 0xbc6609a6, 0xa938cdb5,
-	0x0789e98c, 0x74df7bfc, 0xe14df51e, 0xc23df68b, 0x35b3ab77, 0xfc862f37,
-	0x6fc05db8, 0xc82ffee6, 0xf36979ff, 0xefd21b06, 0xcb3675a5, 0x2aa96af9,
-	0x6cb1b1ec, 0xe66bce2c, 0x0b3ba77e, 0xf65072f1, 0xb0673c61, 0x88168cf9,
-	0x0d182e71, 0xfd1fec4f, 0x9d555be9, 0xdab76bf8, 0xbae11f30, 0x430723fb,
-	0x56977a3b, 0x9e6b1a53, 0x9e7cec03, 0xedc3590b, 0xfdffd263, 0xc3a93be0,
-	0xf68c9915, 0x7e131d67, 0x63fa688f, 0xb767c744, 0xafee30b0, 0x5ca2af68,
-	0x68cf5b38, 0xdc90077f, 0xf037768f, 0x7eccf7fb, 0xb69b8b9c, 0x82f512ff,
-	0xc749668a, 0xa50a8623, 0x6d3f4355, 0xc65129b0, 0x6bc3387d, 0xa3eabbc4,
-	0xc5f137af, 0xf8215556, 0xfbb0981e, 0xe3f71c66, 0x9ea18d36, 0xd3b17fe2,
-	0xc7f8fb83, 0x07c499cd, 0x57ebadbd, 0xa9aaec55, 0x972a3748, 0x30f4d187,
-	0x92ce3eaa, 0xf40e4cbf, 0x699afe47, 0x8be25d6f, 0x6befbf81, 0xbc173892,
-	0xfe16f940, 0xbdbe4cff, 0x80b7c869, 0xa3e2679c, 0xf90f5abe, 0xbe4b1a96,
-	0xa9bc962d, 0x7bc5f708, 0x5e22a686, 0x26aabf17, 0xdb6f92c7, 0xe739f8aa,
-	0xb94e2233, 0xdbe411a3, 0xadf24db7, 0x8c5be411, 0x5fbf9078, 0xff0b7ca8,
-	0x36dff0d7, 0xd6316f94, 0xf9566bab, 0x08f9a636, 0x8d31b7c9, 0xaf3c4b36,
-	0x7c9f3b5d, 0x47af9293, 0xeaa0f8fd, 0x3f418f8b, 0xfe3e84db, 0xc44b888c,
-	0xe5ce5071, 0x7f8d3a6a, 0xe2ee72a1, 0xff73950b, 0xe4367045, 0x8c1de2dc,
-	0xd27b9ce2, 0x8b739721, 0x939c8177, 0x9cb91e90, 0x7187bc5b, 0x7c945cbf,
-	0xbe43d91b, 0x115faa31, 0x4d83ede1, 0x02df0fe9, 0xabf58dfd, 0x1fd4073e,
-	0xc6ef2ddb, 0xae5de599, 0x7adc10a6, 0x1783bbc8, 0x0876ef26, 0x6c720779,
-	0x68d7ca08, 0x5b35f0fa, 0x8f77c1e3, 0x2bff5e3f, 0xcadf97e4, 0x86f8de74,
-	0xbd0f9f8d, 0x1678fe36, 0x6263d7d2, 0xdc848b3e, 0x510aaf6b, 0xe45e53ff,
-	0xf1772beb, 0x468af138, 0xd4561fae, 0xfc2f614b, 0x17c27733, 0x78bfce1a,
-	0x2152c48f, 0xebcecb3f, 0xf38d27b3, 0xc3233632, 0x720b0f44, 0xbfcfc94a,
-	0xf40e6140, 0x72ba97e3, 0x5bfea24f, 0xfefdc39a, 0xf17be2a5, 0xd0abadab,
-	0x88fc5dff, 0x46a5e744, 0xe711ab7c, 0xa26e23db, 0x77f91979, 0x6627e3a3,
-	0x99a9b88a, 0x1bc294bf, 0x947fc462, 0x7fe6b16e, 0x966ff822, 0x62f04adc,
-	0xe331cbaf, 0x5d7a8c38, 0xe0283a70, 0x7ed32754, 0x802705da, 0x27bd379b,
-	0x33d3009c, 0xe1ba5232, 0x585bfc52, 0xebef566f, 0xbd16e035, 0x5d7fc36e,
-	0x0de9fa2a, 0x7b9c060e, 0x1dc05fac, 0x939202ec, 0xa758f0d1, 0x33b5f975,
-	0xe8094e31, 0xe84ce486, 0x181700d7, 0x70d26f2f, 0x47977dcb, 0xd664fd05,
-	0xe1829a4c, 0xae30b30c, 0x6a0bca1c, 0x0fdcbd17, 0x1dee31e0, 0x4edc58ef,
-	0x0f609b2f, 0x56ec39e0, 0x41c92767, 0x35db0e83, 0x141c07ae, 0xbfddddf0,
-	0xf9d93272, 0x7a8e924d, 0x24e23048, 0xae0106b8, 0xa828ff78, 0x8106fc70,
-	0x0eff911e, 0x8719f23c, 0x8bc91ee3, 0x635c9dfe, 0x40bc42bf, 0x8e66ccfd,
-	0x22586097, 0x4eb164bc, 0xa8a97f3a, 0x84117c95, 0x8206d35f, 0xe19f219f,
-	0x93c665cf, 0x58957e89, 0x4c954bf4, 0xa8a965fb, 0xf35ed337, 0x99e7a407,
-	0x036caa4f, 0xfbfe1b81, 0x4f3e7a2a, 0x9e34501c, 0xb6bc04da, 0x085d3c21,
-	0x77ae4eb7, 0xfba0be45, 0x50794650, 0x39e05909, 0x5f73d1e5, 0x0671af09,
-	0x518e90bc, 0xcbe735be, 0x92682f98, 0x9ef4df58, 0x50f3c5eb, 0xef17bf33,
-	0x7ffbc239, 0x18b1f24c, 0xba60beeb, 0x8b9e85ee, 0xbcf16e80, 0x8eba37a4,
-	0xd23b5386, 0xe9bab7f3, 0xe76735f9, 0xe7a44ca1, 0x43f7123d, 0xce5a2734,
-	0x1e763d35, 0x09d5b5f7, 0xeeeb0f74, 0x6df5557c, 0xcb90c6f4, 0x7ed1ee82,
-	0xbb37df30, 0xf1821704, 0x141c5ba2, 0x18f347ef, 0xb353f5c2, 0x64e6de7c,
-	0xf567d7c9, 0x2edbbfde, 0x37278cc5, 0x3f2323f4, 0xf8c3c71a, 0x6f1826f9,
-	0xd178f764, 0x2fe183fb, 0xfabadf38, 0xbad9bfdb, 0x6ebe718c, 0xb590543c,
-	0xb88d5e10, 0xe05223a8, 0x73ea2a47, 0xfc4b25d3, 0xc85ccc15, 0x7fdc6fad,
-	0x7bdc96aa, 0xa74d2cff, 0xebb774fb, 0xe89d77c6, 0xe2674f33, 0xdbe26f7c,
-	0xec7fefb8, 0x5998e7e7, 0x44d6f636, 0xab263fdc, 0xe3eae90c, 0xa1f92a43,
-	0xe3ca9e3f, 0xedf9af6e, 0x3e5d0501, 0x3898f0d7, 0x8938cd76, 0xb037acec,
-	0x87a8f1eb, 0x047f983b, 0xef132fc1, 0xd5d465ed, 0x5f02f14c, 0xae12dd8f,
-	0xa537d4c6, 0xc435e933, 0x219924db, 0x7dfc5ade, 0x7f20b8a7, 0x032c87fb,
-	0x1fa0a05d, 0x07b1fb50, 0x9bd63259, 0x33264fe0, 0x27e37c66, 0xf3075e6f,
-	0xf6487f18, 0xacdea179, 0x03172e03, 0x7ae47a7d, 0xe0980b1b, 0xab858135,
-	0xfe34dfd1, 0x9c3affa8, 0x3be81177, 0xa8a44f78, 0x07b54379, 0x6a25ebf3,
-	0x72050c1f, 0x6d9eb03d, 0xbf7267b5, 0xea017285, 0xf5c13761, 0x4eb05ebc,
-	0x728861f2, 0x8a5af341, 0x93a82a2f, 0xb6e142e8, 0xbc1cc4b0, 0xfa03b0df,
-	0xda1eb6dd, 0x05fee167, 0xbadfb1ed, 0x875e6f33, 0x49e60772, 0xb9f9ebed,
-	0xf3b4017c, 0x2dd4bf22, 0xd78afea2, 0xb3ef0c4b, 0x7df3d514, 0xea90e8a9,
-	0x7dc6f2c3, 0x3b7ed08f, 0x97ebc603, 0x6450fb8e, 0xca0bdd2a, 0x2fba7494,
-	0xf84c1a19, 0x7f1c60eb, 0xf220fa6c, 0xabbc520b, 0x98a0c097, 0x64fe63e3,
-	0xb3f2421f, 0xeb4cb7c0, 0x96bcfd0b, 0x236e9c93, 0xe7433aba, 0xde0147ed,
-	0x1bf78001, 0x40e55e22, 0xab5a07ce, 0xc2fc5f69, 0x9b9f943e, 0x38a24d34,
-	0x8f2c858e, 0x8e6638e2, 0xebe6fae7, 0xe8c33b97, 0xed5d7be7, 0x0fdf881c,
-	0xefa76e5c, 0x1cb8dbed, 0x4ad41f6e, 0xebe3f6fe, 0x58f78655, 0x24cbd7aa,
-	0xabd78e2f, 0x7e563f74, 0x1431c78c, 0xc7fae36e, 0xdfbcf581, 0xe1b7a8e3,
-	0x439607b9, 0x11ab70be, 0xb4e5c0e7, 0xe8167f61, 0x90c2fe3c, 0xdd62e5bb,
-	0x75a1f63d, 0xd92434cb, 0x2e5b7968, 0x8b0971e4, 0x2d1cbd90, 0x1cf1cb77,
-	0x197c83dd, 0xeae6271d, 0x0e9063b6, 0x5d105f22, 0x19521c57, 0x07d231da,
-	0x9714b96d, 0x73a247b6, 0x92cdf18b, 0x8a1ae31f, 0x4987b1de, 0xcfe70eff,
-	0x2fee11fb, 0x8619daef, 0x3c431f2c, 0xb1ca9c80, 0xa7e9fe77, 0x1be4fdf0,
-	0x02088c0e, 0xb827c9ba, 0x59be711b, 0x4f3c799b, 0x52eb1bd6, 0x9b2f3ef0,
-	0x40e497da, 0x02ccad61, 0x52713926, 0x13775ff2, 0xd4741fdf, 0x667c0c77,
-	0xb8053569, 0xc1cb7ebf, 0x66ef55f7, 0xd8646315, 0x043d84ef, 0xf51f81f6,
-	0x6b5de29b, 0x1d133453, 0x9b59ef14, 0x55f7c322, 0x1aa61e22, 0x576857f7,
-	0x8a71f1ac, 0x06fa4af7, 0x3f4638d3, 0x2edabf46, 0x1ee86ede, 0x7fd6f69e,
-	0xd68fce31, 0xf286a9f9, 0x1e9fba22, 0x4fd2f7e3, 0xadcfefce, 0x395e6093,
-	0xac14cbaf, 0x8cc1f39e, 0x1d73e6a1, 0xcafc3523, 0x98da6fd9, 0x9cbf04df,
-	0xbf31c53f, 0xe38ddf09, 0x7f01ef80, 0x61493757, 0x23f984a7, 0xe516795a,
-	0x0af3e475, 0x98ae7fe1, 0x1aebcfca, 0x8158de33, 0x4b233f7c, 0xa1607a22,
-	0x8937d680, 0xfa2f35f4, 0x78b30bfd, 0x8f6842fb, 0x08f8d8fc, 0x13904fe7,
-	0x1523945e, 0x52e6d7eb, 0x8bc93afd, 0xc86e37fd, 0x28a47d27, 0x5e546647,
-	0xa3f48477, 0x4923a6a2, 0xb7c0c7c8, 0xa81f50eb, 0x51d76898, 0x68fc1b8e,
-	0xe2ebf7f0, 0xe8732b3e, 0xc67ef1a3, 0x8be646ff, 0x21f2d7c1, 0xf583d72e,
-	0x39831f9c, 0xdf5f5f9c, 0x2f0ae2a6, 0x9f89bf84, 0xfce16f8f, 0x43763f2a,
-	0x2f87de2e, 0xc3efccdc, 0x453f581f, 0x78fa7d43, 0xa6fda258, 0xbd737f27,
-	0xabbf9a35, 0x7defbe25, 0xe0d2fd5d, 0xe18f836f, 0xaf1c6aef, 0xef14f80c,
-	0xf5f3464f, 0x0fe1b54c, 0xaf7cc3b7, 0x03d61a79, 0xddf29df3, 0x26ad3d3b,
-	0x14f90939, 0x3c2817cc, 0x2b90cb9e, 0xfb8f0ae5, 0x8bf3dafb, 0xb76c3f1a,
-	0x677e47fa, 0xebf1e44f, 0xfdd12a75, 0x07b3f8f9, 0x7f205d9f, 0x9d5f285e,
-	0xf18d3f8f, 0x7ed63de5, 0x2de8277e, 0x8076bfba, 0xfae0046b, 0x8a26fd4a,
-	0xa9e8fdf3, 0x3f113323, 0xce81bba5, 0xddeabe91, 0x4e72822c, 0x557ed309,
-	0x3dd328d2, 0xb244a601, 0xf99b73af, 0x956dc798, 0x7a26e33e, 0x1ed6792a,
-	0x4bed019e, 0x86307e76, 0x779668e2, 0xe85a5c52, 0x872fa129, 0x1f20c75a,
-	0x7e3c2894, 0x042e5a2c, 0xd70fdc1c, 0x367e2bb6, 0xc2da4fae, 0x69288fdf,
-	0x9bb551b8, 0x746e25ce, 0x3a3d46a8, 0x1d010dd7, 0x9c5dfde3, 0x02ddf99f,
-	0x6dac6e23, 0x2513972b, 0x81d92a4d, 0xb7b65b25, 0xc970fc63, 0x77f2763b,
-	0xa19cb705, 0x9e5310fb, 0x94fe46d9, 0x396c9360, 0xb711eb7f, 0xd88e45b9,
-	0xb1b0ee31, 0x211dce9c, 0x0df2847f, 0xcf97e3b1, 0xfa585f17, 0x219d9ecc,
-	0xafe96100, 0x7ca0f49e, 0xd9b2d539, 0x7e877083, 0xba6e32bf, 0xc3669c47,
-	0xa7195f3d, 0x01ff0a79, 0x438f738c, 0x9c4635d8, 0xa4be96eb, 0xb2fcc247,
-	0x739c62f3, 0xdbe5e974, 0xef1c7d3e, 0x7b3db411, 0x6f9c71fa, 0x7e3e3fd9,
-	0xd8c1e31c, 0x77ed275e, 0xa2dea7c1, 0xdda36c38, 0xb5dfb126, 0xe2927d6f,
-	0xb5dfdbd7, 0xf6b7b0fb, 0x6307c73d, 0xf6fb603c, 0x6fd0522f, 0x34cf64b9,
-	0xd92eebf2, 0xc5952531, 0x148c2fd8, 0x017c36e9, 0xf8d1f3f1, 0x8078d03a,
-	0x023ed6e2, 0xebfca37c, 0x286dbb8a, 0x5ecc71e7, 0x1f5b6f11, 0x8f429efb,
-	0xebc6daf8, 0xe51cb9ae, 0x1fd7237e, 0xfb671bcf, 0xdbf1e026, 0x7abf8017,
-	0x1b102fc3, 0x3fe11f7f, 0xa2fb4f00, 0xe369f7f0, 0x8a3c5fc2, 0x7b7d8d65,
-	0x5c8db38d, 0x7b8cdc00, 0xfc380f10, 0x88c91c87, 0x5c525fe7, 0x866de233,
-	0x4f9ff717, 0x91fde307, 0x5ce76a13, 0xc7b85fba, 0x68bc63ae, 0x89b79ec9,
-	0xbc77da7f, 0x26687e41, 0xb3b423ee, 0x3f1e3fae, 0xd675892e, 0xae7c79b9,
-	0xefc63f80, 0x5df43d7a, 0x3a72e9c4, 0x7b77e236, 0x9d95db8b, 0xee36cf5c,
-	0xfdd79467, 0x76c3c451, 0x41ca4be3, 0xcaf91d3c, 0x0e036878, 0xddc390ba,
-	0xe3b1e871, 0x2beebba3, 0xfe217c08, 0x8aea1f70, 0xc0fc8733, 0x7a37e4b1,
-	0x0790c59b, 0xfc781bed, 0xfb1abb7a, 0x9711b05e, 0x3e688ffe, 0x3c585f0d,
-	0xffe6f9fa, 0x81d3e175, 0x4f724fca, 0x2dfdb538, 0x774f1cb6, 0x9eecdf4a,
-	0x7d149961, 0x1cebca6f, 0x473b7187, 0xbb83b434, 0xdeb16cec, 0x6f57e136,
-	0x78a64a7b, 0x070d55e5, 0xcb478e48, 0x2f7c0a8b, 0x337cc625, 0x9a2b7cc5,
-	0xf6d13ef8, 0x82ec3bac, 0xeff6da7e, 0xa8ae7a22, 0xd2f1423f, 0x95f96f2f,
-	0x8b8a6ad6, 0x6c227dc0, 0xd3db7f9a, 0xdc90c6fb, 0x44b2ef16, 0x8c49338f,
-	0x3d8e6c13, 0x8cfeb04e, 0x50d29c65, 0xcebba683, 0xc529de3f, 0x77f6237f,
-	0x83eb85aa, 0xe9e41aa7, 0x0fe318e1, 0x77d6aa73, 0xa4bf60a1, 0xfcdc67f7,
-	0x13d919bd, 0x12e5fa47, 0x093bce77, 0x146a9849, 0x4cbd55af, 0x87fd77c4,
-	0x5df10d2f, 0xe18abeed, 0x7c22577c, 0x551e7e4d, 0x4bd4300f, 0x2cbcb4d5,
-	0xcb442bf4, 0xc6c92d1b, 0x2ffc26c2, 0xf54f4f71, 0x644779d2, 0x70f3e220,
-	0xfb1571c6, 0x9f944bfd, 0x5b0a2fea, 0xfbf30a95, 0x2df2484b, 0xdfd97e83,
-	0xe794183e, 0x977fd9ee, 0xd963f11e, 0xb0aa57e2, 0xbb461e77, 0xa4e0bd84,
-	0xaf7906f8, 0x08f9de93, 0xf5a4ee3e, 0xf9f1d81e, 0xff5fa413, 0xb9f8cec2,
-	0x202f580f, 0xde750aaf, 0x9f1df1c7, 0xd457fe3f, 0x8c31b19f, 0xd438f85f,
-	0x3ea1bb47, 0x8e9cec9e, 0xa0c61367, 0x85f0a45f, 0x3ca266bb, 0xf4e78c2b,
-	0x6a4cf858, 0x3bfa1ab8, 0xc7f3cc96, 0x77a20db6, 0x759f4a25, 0x81e8dc53,
-	0xe055cf1d, 0x4cfed4be, 0xa97dc33c, 0xe7a105fd, 0x53bc52ff, 0xcd7aab55,
-	0x4cc5e3f1, 0xf3ef9af1, 0x12de6294, 0x2fc8c4af, 0xfe847c41, 0xba04a6aa,
-	0xaffa0407, 0xd48f9fa5, 0x447c3bce, 0xfcfea1c7, 0x3fa453fe, 0x7ae883ca,
-	0xcebdf946, 0x395ee221, 0xd77573b4, 0x059d6a0f, 0x9fd35f3c, 0xaa1693cb,
-	0xf853b0ff, 0xcf79458f, 0x87fd797e, 0xeeeefc84, 0x10afb787, 0xd344d0ef,
-	0x6fd146ef, 0x5fbf96e9, 0x959deb1c, 0xefa7f318, 0xc858943f, 0x76ca7a86,
-	0x857fbd27, 0x7de028ef, 0x3f1a9d85, 0x44f32ad7, 0xdd9b9de8, 0xc5971e42,
-	0x9ddde845, 0x581e62fe, 0xd1ccf31f, 0x9fbd34fa, 0x61939cf6, 0x0bf9595c,
-	0xbbe23f6e, 0xc7e7e77c, 0x71859e7e, 0x1714f189, 0xffc2fe5f, 0xb7283a22,
-	0x3f22e647, 0xb3b76e74, 0xdbe7c88d, 0xfc8c1d5f, 0x0646a6da, 0xf38af9f7,
-	0xbb06f2ba, 0x58bffef5, 0xdaaaa9c7, 0xbbbef0cb, 0xa4b6af71, 0x57f33917,
-	0x5fa3d727, 0x725ffa71, 0xdf5bbf12, 0x35553a73, 0x59df133b, 0x3897ea30,
-	0x77c5cb62, 0x137c5e51, 0x71eaee39, 0x9c5df53f, 0x25ac47cf, 0x153efd05,
-	0x3ca377a0, 0x3e92d92f, 0xfb04fd10, 0x043bc69d, 0x8fdc04de, 0xb25eabf6,
-	0xef3531a7, 0x7caa2733, 0xf430ca99, 0x54cc8cdf, 0x1b1d1d60, 0x67f414ce,
-	0x9cea4718, 0x9dee4b1d, 0x3ad3c676, 0x98f61c4a, 0x09cf9df7, 0x8d0f7aba,
-	0x1e3e64fe, 0xee3187f2, 0x724c357e, 0x2f388ef8, 0xbb012bd5, 0x6e97bf08,
-	0x79699399, 0xa1a9457f, 0x04a7c07a, 0x4eb662cf, 0x6fc932cb, 0xa5e2bc63,
-	0x264a9959, 0x4ffe577e, 0xddcabd17, 0x24a16678, 0x01150bd2, 0x9faeb663,
-	0xa2887ee5, 0x7e1039e6, 0x15d3cb1a, 0x86a54919, 0x358e3df8, 0x7502ea50,
-	0x5653bf8b, 0x9e4e50c9, 0xe8f6e710, 0x1bb4c2ef, 0xdc92775e, 0x6c620d0f,
-	0x07be3a78, 0x4dd04de1, 0x10f153f0, 0x5763e61e, 0x1797192a, 0x93b47433,
-	0x7d8050a5, 0x5d54f409, 0xe9133d35, 0x18fcfe11, 0x07a64907, 0xbfa3cfcc,
-	0x41ea05fc, 0x3dfca740, 0x70b2efbf, 0xc3188035, 0x3aafc981, 0xe877f199,
-	0xccc3bf56, 0x71a5c6f6, 0x68e77892, 0x1731c91f, 0x84ebfeeb, 0x94558a3c,
-	0xff09d5b7, 0x4473c1c8, 0xa822ce97, 0x58bbc617, 0xd7521e24, 0x9994e528,
-	0x90593dff, 0x3ea9d137, 0xcd1e5ad1, 0xa2d72017, 0xf8206dc6, 0x449fbf41,
-	0x5449fbf5, 0x557c9fbf, 0x829c06bf, 0x7c3e8d8e, 0x556562a7, 0x1f1b809e,
-	0x06e021cf, 0xef8919f0, 0x9c5b31e8, 0x13879c4f, 0x6cc4e35c, 0xf01f58ec,
-	0x4e971e5a, 0x612fb978, 0x41c6276f, 0x865aa4b3, 0x890aef76, 0x97f0d3ef,
-	0x63b532e7, 0xf0f883ba, 0xb94e311e, 0xc30af380, 0xbea3d53f, 0x1eaff493,
-	0xd5bd9df5, 0xdf5d8b8f, 0xe27cdbdd, 0xb127cf63, 0xe26bfe97, 0x75fff663,
-	0x0bc552e5, 0xe786bf6f, 0x49f25db6, 0xf55bd007, 0xd438f2cc, 0xfd8f1333,
-	0x70be95a3, 0xd031d33d, 0xa438ef8a, 0xb8b7a06f, 0xd1efd661, 0x7d1bd274,
-	0x40758be5, 0xe00fd5de, 0x7f189370, 0xf73f1d6a, 0xf70965be, 0xe87981d3,
-	0x8b37fac7, 0x0a3937fa, 0xc470dfc9, 0xbabfdfc6, 0x91eb96a5, 0xa658fcb7,
-	0xef1ee9f3, 0x803fe151, 0x2a5d6edf, 0xb1e92385, 0x7562d7de, 0x9e6e3f78,
-	0xbdfa3f18, 0xe6f300aa, 0xbd6396ae, 0xd2e9c557, 0xfd1757b8, 0x9602c54e,
-	0xb321de27, 0xd4eb3f7e, 0xcd67e4bb, 0x2c7deea8, 0x1ee816b4, 0x7ba04ff5,
-	0xebc7973c, 0xe2171462, 0x485c78d1, 0x4f3a20cb, 0xd9dfe433, 0xdc04de91,
-	0x307f99af, 0xeff3aeff, 0xa6f4af8b, 0x2a1def9a, 0xef2ce2e7, 0xbeab54f5,
-	0xea6f9434, 0xc15fd039, 0x0dced654, 0x39535e61, 0xfcc4ade8, 0x7249be18,
-	0xa3094d2a, 0x3cf4545c, 0xaf7a8856, 0xa8c3ef78, 0xd55d25af, 0x0ebe67a5,
-	0x4b8e6fff, 0xbc5cbe26, 0xb6f74bd6, 0xdbcf8b3f, 0x7b24f489, 0x57017c72,
-	0xed087a4f, 0xc6aeebe0, 0x5cf7a775, 0xf3e6b54f, 0x157dbe91, 0x6ffc8080,
-	0x4fce073e, 0xf6df7bb6, 0xa37efce2, 0xf4bbf432, 0x44ef8f84, 0x86cfca18,
-	0x887c5007, 0x0463309c, 0xbc46bf8e, 0x6ababa6f, 0xaa2ba524, 0xbc794898,
-	0xaf2a8adc, 0xea447348, 0xaa74e917, 0x1a556f77, 0xf95557e5, 0xebe03528,
-	0xfbd0d5f0, 0x7c618e93, 0xf02e877c, 0xf0136497, 0xe5fe900b, 0x73a4ab48,
-	0x195ea745, 0xd8df77c1, 0x7077d840, 0xc10d7a59, 0xf919d357, 0xe53ea135,
-	0x548798ed, 0xf8419dad, 0x564af452, 0xc56fe508, 0x5c228e07, 0x2d4bde9d,
-	0xd3da5aef, 0x7fbd46c6, 0x836f051a, 0xb871b6de, 0x7a712fdf, 0xfdfb868b,
-	0xe3178b6a, 0xb2bfee22, 0x82295deb, 0x1c43983b, 0xe7e6bfee, 0xdee13db4,
-	0x09be7b32, 0xe9eceeee, 0x04fbf704, 0x7016ef9c, 0xa87816ad, 0x46acf016,
-	0xa47e53b8, 0x3a44fbc8, 0xc47bd29d, 0x112bb7fb, 0x08ca901f, 0x7d878077,
-	0x30c98854, 0xf179ba1e, 0x7412eecf, 0x1fc8dbab, 0xfcf2bb2a, 0x127b7708,
-	0x05c3bb87, 0x06ba2078, 0x3cb17bb8, 0x5d54f044, 0x9f50ce1c, 0x15e441e3,
-	0x7e267b84, 0xb800f8e7, 0x871f8df7, 0x058270f2, 0xe4d25ace, 0x23fb830b,
-	0x124b7f7c, 0xbf0d1e7c, 0xafbf8d24, 0x6f77f06b, 0x88b571fa, 0xef16aeb7,
-	0x511c2227, 0xe00879af, 0x4f0e34c3, 0xc8a47dfe, 0x164d28fb, 0xe0357ff6,
-	0x161fcb01, 0x19c210fa, 0x73c51fd3, 0x56c93cfb, 0x38454fb9, 0xf2efe1f5,
-	0x1b10a4b0, 0x6878cd98, 0x85a5fe2f, 0xc6f31798, 0x4ad7aff9, 0x44aeb23f,
-	0x7de903bd, 0xdd6de918, 0xcf0daaab, 0x57a5e43f, 0xcb67ee59, 0x5e89fdb3,
-	0x42407f82, 0xc13ee6bd, 0x5e916b87, 0x1edc7e68, 0xe0e8295e, 0xeefef16e,
-	0xee7e823d, 0xa0fcfc17, 0x7e3e3741, 0x74cd643f, 0x9498c71e, 0x20ef1361,
-	0x4e399846, 0xc0d7d130, 0xd9179834, 0xe94a5e36, 0x8ef64b9d, 0x7e36f89d,
-	0x7d23f314, 0x6773be25, 0x9b43bf98, 0xa1f50fd7, 0xd9dde344, 0x39c4de89,
-	0xa23d3174, 0x6520f788, 0xc4b64f6e, 0xdab5df7c, 0x7e81dfb7, 0x13e6de99,
-	0xafa7f3ef, 0x6be2f184, 0xf54764dd, 0x59cde40d, 0x2d577908, 0xcb0c55d8,
-	0xc1707cb9, 0xf44d0bbc, 0x5f8bdf11, 0x595d7547, 0xf64af480, 0xa93fa438,
-	0xf844ea1d, 0xe8bdac02, 0xcd487abf, 0xc1fb87eb, 0xfdb18943, 0xb9e2b370,
-	0x7593c4bf, 0xb09fc5a9, 0x3b53f54e, 0xde55a27d, 0x43fb13ac, 0xfe56a99f,
-	0xcb83f630, 0xc59f7f44, 0x0f147e07, 0x6e729674, 0xa4cfc92a, 0x0fef636b,
-	0xc216aad5, 0x47aa39f7, 0xe50ebe73, 0xee6f5c6b, 0x9d187721, 0x8c0d9c83,
-	0x2ffe88d8, 0x3396be83, 0x8c42e72e, 0xbac693eb, 0x3ef4867e, 0x9d01f702,
-	0x01f71ee8, 0x34c3cbcc, 0x5b949ba2, 0x587fe46c, 0x5eecf825, 0x046b5fc1,
-	0x7c803d5f, 0x81df0235, 0x13fa51f6, 0x90eb4fc1, 0x12dd20ff, 0x78f5ce9f,
-	0x6197bef1, 0x8c772cc7, 0xab1cf7a5, 0x0fda365d, 0x61ed7794, 0xfb05da17,
-	0xf7e8ebc6, 0x7a59dd91, 0x59e58dc0, 0x43c03f0e, 0x91d2cc4a, 0x2f733e5e,
-	0xe2abe8b8, 0xf4fd015b, 0x72a2b0ae, 0x949ea47f, 0x451fdec7, 0x9ef453a7,
-	0xcb5faa80, 0x70fd3fd0, 0xe113a552, 0x8f3c70fc, 0xcfcdaad3, 0x3e03b826,
-	0xe29bc5b6, 0x5f6752a5, 0x1f1ef5d5, 0x2f70ff76, 0x12ec12ef, 0x0c0d82f2,
-	0xf92661b1, 0x7bde2b50, 0x1b10de64, 0xcb139269, 0xf432e787, 0x0f94f5eb,
-	0xcdcbc8bd, 0x90ae5e5c, 0x434bcb62, 0x65e4377f, 0xd2315cb4, 0xb74d1795,
-	0x5d54a7dc, 0x66f2463e, 0xc1ff6c64, 0xfcede3ef, 0xf3e66a1d, 0x2cf7a7e5,
-	0xdefd7807, 0x83d42f0c, 0xf7c57f0c, 0x5a27ac62, 0xcab89e3e, 0xf40357d8,
-	0xcd02d03e, 0xaff8f0fb, 0xfbad57dc, 0xd5b9e141, 0x9c140fa4, 0xa8b4a1cb,
-	0x11f13a76, 0x9318d3c3, 0xfd7c7c9d, 0xdf883d0f, 0x7ce2b5e3, 0xc61abd7c,
-	0x1b7da4b8, 0x0e607aef, 0xe3c175c0, 0xe38f9d32, 0x14d90d3d, 0xbcb2c2df,
-	0xef1ba7a4, 0xdf0f1e23, 0x31c731ee, 0xe9d4fc14, 0x37bffd47, 0x1f582c7a,
-	0x8d537fdb, 0x83bb44ff, 0x5da246f9, 0x675dfa01, 0x9fbff504, 0x18dde938,
-	0x18da1f23, 0x8fc733ef, 0xf15be918, 0xdc21ced3, 0x33f78adf, 0xab9dd217,
-	0xf4d79d0f, 0xdc7c17ce, 0xc733e863, 0x4547d273, 0x7dc0359c, 0xca7fc596,
-	0x098f49cf, 0xf473187f, 0xca271e52, 0x7b94bdbd, 0xd3133c78, 0xd3ff9763,
-	0x3d51a47e, 0xb821b4ec, 0xd3daf2fe, 0x2fa5deab, 0x6280f3d6, 0x60bdc711,
-	0x79787c63, 0x2059be0c, 0x102f07ee, 0x7d065de7, 0xd0df7f15, 0x465d39b3,
-	0xd4f4add3, 0x1fa74425, 0x5fc9541f, 0x87f4015b, 0xd4f4987a, 0x698f7a78,
-	0x3d9713d9, 0xf9c00b78, 0x95324393, 0x10739d97, 0x87ffb65d, 0x3bfce28f,
-	0xefd2ab7f, 0x70727c26, 0xb7ebc51a, 0xbb9ef78b, 0xedc5cef8, 0x5c5c1bda,
-	0xbb9c14ae, 0x8bbbe897, 0x35f3c2ae, 0x7382dbe4, 0x565e900f, 0x4ebdef80,
-	0x788f75c0, 0xe8229279, 0x1fb60277, 0xea1cbb92, 0x3e72b615, 0x15431361,
-	0x10de8fe4, 0x0637bbef, 0xf2e0df3f, 0x0b45e25a, 0xff50d75b, 0x24c3f40c,
-	0x02c85c53, 0x8507fbf1, 0xe584b878, 0x21a5887a, 0xd6f908df, 0x77d6ff4d,
-	0xd69ddbb0, 0xc2e91a75, 0xb04e75ae, 0xebdd61d8, 0x73e72efc, 0xb6146fa1,
-	0x7579f0e6, 0xe3e7e7ad, 0x7ba7ad63, 0x7da9131d, 0xf1ec627b, 0x1fe317ef,
-	0x9bc22aab, 0xbc44ac5b, 0xbe105bb7, 0xd5f7c35d, 0xf627d60a, 0x2aeb4c91,
-	0xc4b52dac, 0xe6d4152b, 0x857afbd3, 0xdbb5f3eb, 0x1753fb4c, 0x97fe425e,
-	0xc6eb0d27, 0x2e6bfdcb, 0xaea8bc23, 0x7e913bbc, 0x7c553d8f, 0xec5e7bc7,
-	0x84e9e397, 0x49531a16, 0x4f76eaf2, 0xf74dfbac, 0x56a9e347, 0x80ec09e0,
-	0x0c9e132c, 0x3fb744fc, 0x8efcb9b6, 0xe21cf0f7, 0x509afe11, 0x0a2bf2ef,
-	0xe1b1e97f, 0xd7a0a4f7, 0x040fa063, 0xdf7e082e, 0xf5cbc4b2, 0x6f813f0a,
-	0x77c63e03, 0x08c2e7d0, 0x379127b7, 0x4e3fb193, 0x5b83e70f, 0x1e82f8f7,
-	0xcf5ec526, 0x59eb5d6b, 0xc7a042ca, 0x3eb8d49c, 0xee7afbd1, 0x05c72162,
-	0x4f8ba7ac, 0xfa7c2df3, 0x385b9ada, 0x9ffc0a9f, 0xd10f7fdc, 0xbc70b1f5,
-	0x7a54e30f, 0x486bcf5b, 0xd062e307, 0x1b10b0c1, 0x8f7ffd95, 0xfe684e0e,
-	0x3ee08f11, 0xee15fb02, 0xde4fc5d3, 0xbf3cc63f, 0xfd27e2b7, 0x9aa5f69e,
-	0x0ea73b0b, 0xf41df64d, 0xfb277ed2, 0x434961aa, 0x633f815d, 0xa3cf12fb,
-	0x6e9fa19f, 0xc6cfe245, 0x578bd2c4, 0xc72e0556, 0xaaea8bf3, 0x8fd1cba2,
-	0x973d0aaa, 0xce9b9ea1, 0xd623177f, 0xcdcc7d7b, 0xaab2bbf1, 0x983fce92,
-	0x94f4c423, 0xd80077ee, 0x47f24c89, 0x7eab2e2b, 0x1d01a9a6, 0x789adffd,
-	0x025540a7, 0xd0b3d3ab, 0x1194945f, 0x1fefc132, 0xb2ee7e2e, 0x8ebf6d26,
-	0xe8761ae7, 0x8e60fd1f, 0x8b59ca81, 0x6545ecff, 0x93c05f41, 0x1c731cf1,
-	0x124bf06b, 0x46cf13f9, 0x5acf13f9, 0xf30491e6, 0x5b3b0afe, 0x1ce87871,
-	0x8fc26152, 0x5f01e02c, 0x5bbb1f68, 0x1e5cebe7, 0x607d21ef, 0xb23645d5,
-	0xff09d6eb, 0x2fd0cff4, 0xe851704d, 0xe0c301bc, 0xc096beb0, 0x73c4e1d7,
-	0xaded190c, 0xf8dde508, 0x4f4c9762, 0x4f984a1f, 0xf3095e64, 0x1564597d,
-	0x931d0fda, 0x3f20ef5a, 0xe69033a0, 0xd67ebc06, 0x84b0e5af, 0x817912e7,
-	0xb5ce118b, 0x0bc32872, 0x77217ff5, 0xc1bd6066, 0x1f4ef450, 0xf7845e9e,
-	0xf3a60212, 0x8eb421ce, 0x33dcbcee, 0x2552d17f, 0x6feffcea, 0x5fcb9b17,
-	0xc62ffa71, 0xf93b5479, 0x1f4960fb, 0x57be7448, 0x94ee75dd, 0x64f2fb47,
-	0xd123c737, 0x41d5d205, 0x559d37ae, 0xc87d09bc, 0xf3323d9f, 0x7c3ccb45,
-	0xec22bc96, 0x53a03ad1, 0xe832a73c, 0xb7e29863, 0xaf0d1d21, 0x3c66ef81,
-	0xfb77d0c6, 0xf079e8b8, 0x31b9fa98, 0xe897183f, 0xcb973e55, 0x7a28e3f7,
-	0xf9f12dd8, 0xdced8a87, 0x1921646e, 0x20c73af1, 0xcf05653c, 0x8fe33227,
-	0x8d77b5ec, 0x82b62773, 0x0b9e75e7, 0xb9cfc6de, 0xa733e7a3, 0x3c16eef9,
-	0xdcd399ef, 0x7b9e3e6f, 0xf8ba29ce, 0xab774c43, 0x51e3fb9d, 0x2250fc5e,
-	0xb7a6f67d, 0x21e3545e, 0x46e6f1dd, 0xae609f7a, 0x73bfef9b, 0xf88aa759,
-	0xe35d300f, 0x5a6156e7, 0x27cc6ddf, 0xfa2a0df2, 0x84896e1d, 0x721ab86f,
-	0xbe18beb7, 0xb9bdd51a, 0x425f3b07, 0xf41a05b4, 0x321b3a5c, 0x5ef935da,
-	0xaede79e6, 0xf14e0e0b, 0x838a47fb, 0x6ebdd5d6, 0x58c1c107, 0x7c24d427,
-	0xbc49c174, 0xa5c066cf, 0x37f1dd6b, 0xf8fe855f, 0x1cdce4de, 0x790fe8c7,
-	0x579f3c9c, 0xc13e9c34, 0x0b939022, 0xb91ffedd, 0xb77afca1, 0xcb4c2eff,
-	0x95839d1c, 0x5537c421, 0x0390af98, 0x1c00a517, 0xb8141a3e, 0xd1e11938,
-	0xf482f7d2, 0x2e4ec3fe, 0x1ba70e0f, 0x1bab6d7a, 0xc8bd9be9, 0xf7e35af5,
-	0x38ed5632, 0x008dff7e, 0xe55e8f9f, 0xcb95cdef, 0x22ee6bde, 0x62ccb2ff,
-	0x7a4621d9, 0x1e0df858, 0x7bc4db76, 0xf39d7cd1, 0x79ef0e14, 0xcf74f18d,
-	0xd952de6e, 0xbcfdbef2, 0x957e3ca5, 0xae632d29, 0x2b09d8b7, 0xecf75d04,
-	0xd11afd07, 0x3a5fccfd, 0xd92dde99, 0xc893e9a9, 0xa738f1cf, 0xfd53f9b3,
-	0x4ffdc632, 0x1f912d58, 0x6f51fc69, 0xe7e42b53, 0xc87d1387, 0x5ceff3ae,
-	0x97ef899c, 0x3f70b454, 0x28bcaa67, 0x7d203fe3, 0xefdf3f68, 0xe108bf31,
-	0x5d7bf2e4, 0x369af3a6, 0x474332b5, 0xe5d5be7a, 0x7f907947, 0xc45dffbd,
-	0x30e7e1a7, 0x40e7ddf6, 0xce38c00f, 0x39bc5bfc, 0x0df91f48, 0x0ea53f4e,
-	0x5c81c4a6, 0x039857cb, 0x298d54d3, 0x98e34c4e, 0xe5ecd303, 0x9daa7f42,
-	0x2783fa45, 0xf7c34f27, 0x9f9bf3c4, 0x17db14fc, 0x927d912a, 0x9bf29e89,
-	0xee82fd5f, 0x28f3f9c3, 0x5b5bf74e, 0x39dd8b34, 0xff9ac1ba, 0x9f359376,
-	0x33e6b111, 0x03f35a0f, 0x7d266d70, 0x1e1eff73, 0x9a7a529f, 0x1e7defdf,
-	0x3c22a060, 0x3e49d9b6, 0xce6d294e, 0xd38778c6, 0x586dbb4f, 0xdceffbbe,
-	0xeadceeee, 0xf72577a4, 0xe2c717bd, 0x6a1df092, 0x3f2c46e7, 0x8d90d71d,
-	0x4fa845fe, 0xbbb04b71, 0x71bb408e, 0xbd06a5e7, 0x69be2986, 0xfdf83fe7,
-	0xf6adce94, 0x9c51c630, 0xd3e4f5de, 0xb7a79f48, 0xec7d200e, 0xc3642979,
-	0x70f7437e, 0xf3884ffc, 0xe954e458, 0x7e3dab16, 0x1d01e842, 0xe879b527,
-	0xd6b8ba17, 0xc24beeba, 0xa8a77cd6, 0x7d331b7f, 0x10f8c74f, 0xdc34aaef,
-	0x7ec53767, 0xc173fdbf, 0xa53d4f17, 0x8b2b7419, 0x37991ef7, 0xe2befba5,
-	0xdb73eeee, 0x8e800325, 0x4316114a, 0x4697bfba, 0x0f85db8d, 0x38927fd1,
-	0xadfceb2f, 0x5539f04c, 0xef896455, 0xaafbd2e8, 0x4d53697c, 0xed4151fb,
-	0xd27c94be, 0xdca5f757, 0xca67da66, 0xb9481eb6, 0xdb6bfa19, 0xebefd0a2,
-	0xe279cd95, 0xf8490981, 0xf9c06e5d, 0xe7fa3962, 0xf25e1ada, 0x8bd03d60,
-	0xbde39ac7, 0xa5c76b0a, 0xe9f1354d, 0x834ba5d7, 0x0e74ca9f, 0x5a72e79f,
-	0x461ef172, 0x1dff2d69, 0x1b86d2be, 0xe11abbae, 0x4fdf9ebe, 0x9e5856cf,
-	0xb653fc0c, 0x8fef86fd, 0xc7c1ef86, 0x3e70f9c6, 0x2d24f8d9, 0x3fadbbde,
-	0xee76f743, 0x44ff71b5, 0x7b465c34, 0xfdef7e38, 0xe508ab81, 0xa2f7f412,
-	0x3fb52c6d, 0xe47d0368, 0x6bd0e4c4, 0xd3954337, 0x570fe1ac, 0x95965c53,
-	0x253e809e, 0x373ab7d4, 0xf48dbe4b, 0xb5f67975, 0x97fb5aa8, 0x943a3c51,
-	0x8a37b4c7, 0xa27ed6c3, 0x47a57cf1, 0x68f77e32, 0xa25e99a4, 0x119df5eb,
-	0x2ab7dfa2, 0xcd720a5b, 0x1d97efa4, 0xd878a1ad, 0x19c871e8, 0xc13b8a68,
-	0x7c4bd1fd, 0x027a14ec, 0x22d91c93, 0xcf287c5e, 0x48a7bbd3, 0xa5104097,
-	0x5ea9b297, 0x6cb5eb84, 0x4bcfa63a, 0x99640791, 0x33f203cb, 0x79278b6d,
-	0x3eb7a6d0, 0xa3a473f1, 0x1e74d1fa, 0xefdc5fd6, 0xe846f36e, 0x77e358bd,
-	0x9e74da71, 0x5276692f, 0x8fe9d53c, 0xcb979234, 0xeb138e30, 0xd9b4ed3f,
-	0xbd3b5f40, 0x8c64efbd, 0xe06b6e0b, 0x6a9f8aef, 0xfb593be8, 0x9a37fd8a,
-	0xf17d8def, 0xdf13fe08, 0x8bf8f54f, 0xacdfb83d, 0xa9d371e0, 0x2a332b7d,
-	0x68c9e063, 0x6655a497, 0x79d2bda0, 0x91b7cbab, 0x0ae953eb, 0xc8d3ddf9,
-	0xfc2f92af, 0x79e9f749, 0xbea07877, 0xe1faea1b, 0xe5073eff, 0xfc77e88d,
-	0xa1ddf640, 0x1f3eed0f, 0xa015905f, 0x03f4e3fb, 0x7cfe3036, 0xa0144585,
-	0xafb8f9b7, 0xc93ca18c, 0x25ebf9cf, 0xb05c238a, 0x7c1ebac6, 0x1fbcdae7,
-	0x292fe116, 0xb0b8c50e, 0xd68b4a06, 0x718bcb5b, 0xbc50f0ff, 0x94cbc517,
-	0x19cb59d4, 0xad1f908b, 0x7b4bfeac, 0xca7db82c, 0x6bf9f58c, 0xa3b9163c,
-	0x50f9dc92, 0x95f5a3ce, 0xd20037a2, 0x1cfec49b, 0x6d2733bc, 0x4b1da401,
-	0xc82da427, 0x7cee7bc4, 0x8ed3231f, 0x8fbf98f8, 0x45953a57, 0x7177f106,
-	0xa58fee18, 0x346452cd, 0xe42c1de6, 0xe3bfcb19, 0x6eb820fb, 0x63313df3,
-	0xf35eb8dd, 0xc726f677, 0x10cf71ab, 0x2f2e6bd7, 0xab287013, 0x3afc5bb7,
-	0x90a5ea13, 0x7f78dbfb, 0x55da95a9, 0xb7697e34, 0x5ff62bf4, 0x1399b7d8,
-	0x68a135f0, 0x798b8c83, 0x878e4ba8, 0x0f75892f, 0xdf80b0e5, 0xf4143743,
-	0x107d7e43, 0x02fecff5, 0x9f2439c0, 0x45809f84, 0x5c5e301c, 0xca9e5766,
-	0xfcf397b3, 0x8ae04f3e, 0xaf6081da, 0x873a01a9, 0xbde72f9a, 0x471bf78c,
-	0x425e0626, 0xf9b7ccbc, 0xb7c42b07, 0x17e411fe, 0xf0e1ca5d, 0x4bcad8f0,
-	0xc5d9632a, 0x933fbf02, 0x3e5ce81a, 0xa3ef8bb4, 0xd54eacee, 0x8bfef7ec,
-	0xfb094790, 0x4f5ee95b, 0xee890ee7, 0x1d223f13, 0x8fb6fba1, 0x6865e95c,
-	0x9e01a7c7, 0x223eee50, 0x5ef815b1, 0xace3565e, 0x9e212f45, 0x787ce2b3,
-	0x38de5fde, 0xd1772e49, 0x15beb9fa, 0xcf01b95f, 0x8de75283, 0x0e748b1c,
-	0x2d779eeb, 0xe3d0ff7c, 0xb9faf1a5, 0x96d3de38, 0x8f17d287, 0x16f3f1c2,
-	0x387c84bd, 0xa1ee8e3a, 0xdcac02a7, 0x8d5d287d, 0xcb1a547a, 0x60fa87d8,
-	0x58ef0cda, 0xe43fb9f4, 0xdb24e3e1, 0x50b379e4, 0xf3cb1bcf, 0xf92c7e7d,
-	0xae111237, 0xed5271a5, 0x17ce3a6c, 0xe85ea3bf, 0xcb823f40, 0x9529ef84,
-	0xea7e3819, 0x69269e50, 0x3c0f8a11, 0x99bde064, 0xd12de9c7, 0x25e9c919,
-	0x454a4c5f, 0x1b50ee3b, 0xbf20d418, 0xec340d0e, 0xf48b88cc, 0x792361f0,
-	0x2df7617d, 0x5ff7e0c9, 0xfa1b0692, 0xa1d7af0f, 0x513213fa, 0xf5c1beae,
-	0x7e5c4ff1, 0xa65f57f2, 0x4fbf8ec5, 0x0a78e048, 0x61638b9e, 0x3838ff93,
-	0x13d233fb, 0x2c3ce783, 0xf027da6c, 0x1c734dbd, 0x7ed15977, 0x72841dfa,
-	0x01f742d6, 0x71ac1bca, 0xc5c597e7, 0xf3a0d71e, 0x0b1b39e0, 0x1e3225f5,
-	0x21d7f688, 0xc2d573a9, 0x4b17ba24, 0x73c13be7, 0xc6990b1a, 0x63eb9e0f,
-	0x33cd77cd, 0xaee9fa85, 0x9af5acc7, 0x2c7aa73e, 0xe383d5a7, 0xb4adebb4,
-	0x29cf048f, 0x6fd8ced4, 0x90b6c23a, 0xeedcfc0a, 0xe21de5e5, 0x6fa8cf3c,
-	0x5b3ed7f4, 0xf8def713, 0x556de8bb, 0x2e007820, 0x219f368f, 0xf359747f,
-	0x418b823e, 0x89f0dd0f, 0x7c132167, 0x225baa52, 0x69ede036, 0x7bb86e0f,
-	0xc990d814, 0x871f05fb, 0x9feddd36, 0xbbf8e508, 0x8ebe260f, 0x73e2eacf,
-	0xd90f3312, 0x42172e64, 0x9d4f7775, 0xfa8bca68, 0x9b43ed5d, 0x340a98af,
-	0xb78a3595, 0x27c1e6bf, 0x4e4e595e, 0xdf111a8b, 0xcf3839df, 0xa23bca6d,
-	0x8fc82ef2, 0xa8f5e536, 0xf2a8a4f2, 0x40fca8b4, 0x1dcdbf5e, 0x40fb2c19,
-	0xd4f83fde, 0x9efbf815, 0x7322fd6d, 0x358f05f1, 0xf02bb6f2, 0xb3cb7cf7,
-	0x56d3eff8, 0xc93e4b34, 0xba2b3f24, 0xb55bf3ce, 0x0e10a3f9, 0x1ca32f2d,
-	0x74926b28, 0x0d5debd4, 0xc79423db, 0xbb535e76, 0x963f6e06, 0x76a11c35,
-	0xd23ff6bd, 0xef7c7c46, 0xdea9f7c8, 0xd89fcef9, 0x5befeb0c, 0x751e76f5,
-	0x4e2c0a44, 0x7f7eee48, 0xdbfb6dbd, 0x0a2fbfdd, 0xf9fbdbdf, 0x8d1c900f,
-	0xc41e07ba, 0xf9bab8f9, 0xbde380c4, 0x7bd2cf23, 0xdd1c7fb4, 0x03aa16fc,
-	0x2cce4bf1, 0x9fdda053, 0x438f8fcb, 0xb4df0b7d, 0x67e37dc5, 0xdc12f852,
-	0x81651e8f, 0x5bdc704b, 0xc3ef87cb, 0xac384c9f, 0xef863eb6, 0xf0786f95,
-	0x98142be5, 0xeb7761df, 0xb709fc20, 0xf06f094d, 0x7f2b727c, 0x1dff4551,
-	0xa0f0e7e1, 0xc83641d6, 0xa6c0993f, 0xeb787e53, 0x3d7f9863, 0x3faf04e1,
-	0xac9075ba, 0xf27209a3, 0xdf90a98a, 0xf7e6c7ac, 0x37ae04da, 0x369bf31b,
-	0x8453ffdc, 0xfbe32b0b, 0x76335e0d, 0x5b9d3c80, 0x66db6a72, 0x1fdcc780,
-	0xdb9c93c5, 0x55dd76dc, 0x50870479, 0xa611c61e, 0x7ed3780a, 0x215d7248,
-	0xee1fa27d, 0xf1ba7d81, 0xe2dc1ee9, 0xd2e2fda5, 0x37a8edca, 0x451dcea4,
-	0xc7a145fb, 0xddc9e92f, 0x52193869, 0x3ae92fa8, 0x8db2eb97, 0xef5223e2,
-	0xf51e9372, 0x033df8a0, 0x0fa23be0, 0x36cbc097, 0x096d9eb1, 0x80f6bfdc,
-	0xf3f51a67, 0xc47fe49e, 0x42ca6321, 0xc5a7f24e, 0xf372be91, 0x202b9006,
-	0x7989d7d7, 0x097b5baf, 0x466e29f9, 0xfc28f13f, 0x67d7efee, 0xbffeb754,
-	0xaef2032e, 0xdd6ebb6e, 0xf33f7f2c, 0x0dbaf6b9, 0x5b90dcbc, 0x7b79d2eb,
-	0xad4abf63, 0x3ea4e3e6, 0x5c46c978, 0x28c2bc47, 0xece17b7e, 0xd1971b11,
-	0xad2d7ffe, 0xfdfdf99f, 0x5a3f0ed0, 0x7a86c43c, 0xc29f81a9, 0x1257fee1,
-	0x89373d60, 0xf035efdf, 0xb74f8c64, 0x907f51e2, 0x3b407f41, 0xeb403135,
-	0x0c627d07, 0xfae06e0f, 0x3316d204, 0xad2997c1, 0xfffbf0e3, 0xfdb53820,
-	0x4ff4e02b, 0xc947779f, 0x0c379021, 0x7a5f2ffb, 0xedff72dc, 0x23d1013f,
-	0x8000702a, 0x00008000, 0x00088b1f, 0x00000000, 0x7dc5ff00, 0xd554780b,
-	0x733ef0b5, 0x9992bcce, 0x924c2664, 0x84e3c849, 0x71100840, 0xf0444312,
-	0x51888431, 0xd4503b69, 0x20717ad8, 0x9926023c, 0x4b62d5a8, 0x79120cff,
-	0x22341809, 0x0281c150, 0x06f55bc5, 0x701a8c45, 0xaf7a8a44, 0xb7ad8ef6,
-	0xff7f6c57, 0x4a8f8808, 0xd2f5a232, 0x5ad7fd97, 0xce64ef7b, 0xb6b4a924,
-	0xdc3ef9bd, 0xd9cfb3ee, 0xd7b5ed7b, 0xf6b5af6b, 0x4cf5a61e, 0xd8c05c0a,
-	0xce6a2566, 0x7c2c64ae, 0x61edf148, 0x67cf07f0, 0xf7fb193b, 0x95d5a0b4,
-	0xf19fd8c9, 0xe6c60aef, 0x2729bf7e, 0x8ded0658, 0x61cb1823, 0xcfbbf52c,
-	0xd500ded4, 0x7a3f4bb9, 0x3f7c0f7c, 0x8ca97bf7, 0x43ef03e9, 0xf7c18c8f,
-	0x5b6dbcef, 0xd2842ecf, 0x793519d2, 0xf986bca0, 0xef7bc056, 0x27435898,
-	0xbe0ef7f4, 0x5563097a, 0x35e5bbdf, 0xdbb19136, 0x93632a5d, 0xf8ab5b18,
-	0x258a9873, 0xbbe0db0b, 0x644b2cf0, 0x7d63114f, 0x0cd85311, 0x23b875fd,
-	0xb8c1175b, 0xf995d71d, 0x1f5fd0c2, 0xef867e63, 0xf7a54b2d, 0x4c3ddc3a,
-	0x744bf6c3, 0x0ec24017, 0x19faa17e, 0x5a37e3d4, 0x7814bb22, 0x76c2ce5e,
-	0x3e325f6c, 0xf3fa8612, 0x7f7d0e30, 0x0f644a63, 0x8f82cfb6, 0xa371dea0,
-	0xfe861237, 0x47622cec, 0xfa763a78, 0x8c1c3273, 0x05acaae5, 0x8228efe1,
-	0x2b59943a, 0x0701cdd9, 0x713fcfe2, 0x0f007396, 0x6899775f, 0x3d95a93e,
-	0xf437ff4f, 0x7ddbd6c7, 0xe1b0a063, 0xcf6f58ab, 0x3b997826, 0x66f88558,
-	0xb803fc1a, 0x89c81fea, 0xcce7c3ac, 0xb1eb8557, 0x479fe9da, 0x5520fff0,
-	0xb61ff847, 0x0ab635b3, 0x66d61528, 0x0bfc00cb, 0x43fb5878, 0x37630c00,
-	0x978000e3, 0xd670d7ff, 0x2bf3c3a9, 0x07ad0a5d, 0x556df9fc, 0xbc67cd8c,
-	0xd4f2fe7d, 0x58899577, 0x1a6b51aa, 0xa5735b3c, 0xef46c7bf, 0xe28f3fb1,
-	0x0bfa0da5, 0x25b7f132, 0x09ba44ee, 0xd86977e2, 0xba9defff, 0xfdf0eb03,
-	0xf8765c44, 0xfbe074be, 0xf9a3173a, 0xfc3955cf, 0x475535ac, 0xc8fc4afc,
-	0xd7c24eb2, 0x713f90fe, 0x724e393c, 0xfcbaf7bf, 0x00be2237, 0x0f74d1ef,
-	0x75a545e2, 0x63d7864d, 0x43b06f89, 0xd556dcfb, 0x33e0377d, 0xf349ccb8,
-	0x9cdef095, 0x158cbf1d, 0x74ffee0f, 0x8695736a, 0xe9c65ff3, 0x02b72d9d,
-	0x62f112e2, 0x5d03a819, 0x63f1642c, 0xe7886526, 0x8445f45a, 0xc247517f,
-	0x2fdff4f7, 0x49ef89ac, 0x92ba617e, 0x2ba0bf04, 0xdd70d15d, 0x375f0a82,
-	0x373e258b, 0x6e183650, 0x82d5cf89, 0x245d24ee, 0xe2357be3, 0x7c60d27b,
-	0xf93d2c7b, 0x99706fd8, 0xdc94f095, 0xfa11633f, 0xf03b21ee, 0x16ddd00f,
-	0xdd7a2145, 0x646a5772, 0x3da7f225, 0x19f117be, 0xad157c3a, 0x1492ef77,
-	0xdb2bc19d, 0x9441302c, 0x9c9d8733, 0x4a7a4b8f, 0x617a9f90, 0x9f587ece,
-	0x9dd5d7de, 0xc1024561, 0xeaebf358, 0xdeffa42e, 0xfde6af67, 0x19d548ac,
-	0x618843d4, 0xfe143718, 0xbc032b43, 0x2cc5349e, 0xe0175e34, 0xff09c257,
-	0x435fe17a, 0xe8bc80c5, 0xbf1c06c3, 0x9807cb8b, 0xe71a12e1, 0x1d6c29db,
-	0x526cdb8c, 0x6f6826fc, 0xb23e3a5e, 0x4361c392, 0x20146a3e, 0x9b589b35,
-	0xf7c03152, 0x2513a6cd, 0x36f195b7, 0x85bbde0d, 0xf78175f1, 0x5f002a8e,
-	0x4c7d6da3, 0xfa45ba45, 0xd8a5f687, 0xff80345e, 0xf9bff5e6, 0x7cdfc213,
-	0x8d1748c0, 0xb1e7198f, 0x8a9e9134, 0xb524e806, 0xd589e392, 0x8018c8b0,
-	0xa9ea29d7, 0x8a88b1b5, 0xcd565a78, 0x66e9024e, 0x8199e91e, 0xecace3f4,
-	0x0ca1f364, 0x11fcc07d, 0xf74a7b80, 0xc24697ce, 0x58daeefb, 0xb4374e3e,
-	0x4e8bb6ec, 0xbeb0345d, 0xba4bce12, 0x41cca937, 0x0077d1e3, 0x83bf7f8a,
-	0xfb371bde, 0x6ef2c482, 0xa4d32efa, 0xe0f6bd12, 0xcd1be423, 0x38c0a39f,
-	0x328c979b, 0x82a67ae1, 0xbcb9437c, 0xaeec7db0, 0x7f678415, 0x07b7ca09,
-	0x09ce80d3, 0x942abe9f, 0xeaeea52f, 0xbfa0bb5f, 0xffd5dca7, 0x138e258d,
-	0x47f4e270, 0xa648be90, 0x23bd64e7, 0x6e2ecbdf, 0x0c716f29, 0x17f01eff,
-	0x35be2de1, 0x4d0fcb9d, 0xffa2faa1, 0x475cef30, 0x374469f0, 0x222f6db7,
-	0xdac0dc79, 0x591ade89, 0xbbf482c4, 0x69c2c6c8, 0xe08b1740, 0x172874b5,
-	0x3d32b16f, 0x4496fd61, 0x2146f58c, 0x31616e0f, 0x7d96fefa, 0x2c35ed49,
-	0x26f684ea, 0x62a68b1b, 0x6f6c69d9, 0xef417166, 0x3e26b67f, 0xbe7c1d67,
-	0x77758b37, 0x20d444d7, 0x1dab7bcc, 0xbe065774, 0x33eb4ed0, 0x5a4ef965,
-	0x7f0af4cf, 0x4fa83dd1, 0x76fb355e, 0x27bedd01, 0xe7e24bd6, 0xbbf5575e,
-	0xd514f788, 0xdf8ff344, 0x9cfc2563, 0xeb8dbd02, 0xdd9b9f7f, 0xdeca1b3c,
-	0x7a3bdd56, 0x55c9a234, 0x1839db30, 0xb39eebcf, 0xb8dd2037, 0xb7c226dd,
-	0x65cc7e7c, 0xddd57aa6, 0x522bff02, 0x088abb23, 0x9e9113dd, 0x7d4946aa,
-	0x82ce26ca, 0x5666bbfa, 0xe6f509d7, 0xec411deb, 0x07ed07af, 0xb9b817a8,
-	0x5b7028de, 0x2eb27e68, 0x06e92be7, 0x52fea1c6, 0x84a5e22e, 0xc85b8c63,
-	0x7f89b641, 0xe6eff427, 0x493b2925, 0xafd3f6ff, 0x96fd1189, 0xd7882c05,
-	0x795c84e7, 0x3695ca4e, 0x9a2b972b, 0xa832ee6b, 0x9941f73f, 0x95e01d6f,
-	0x83de8295, 0x4a3f1bef, 0x5e9e91d1, 0xef5fe8f9, 0x9fb419fd, 0x5ba2c0fd,
-	0xd2017da1, 0x73dbac18, 0x6047970a, 0x8fd4307f, 0x38f6c08d, 0xb1c1e36e,
-	0xb41c7f64, 0xc846fb08, 0xe0b4c6cf, 0x4fd085d6, 0x3e9993e3, 0xbcf664a0,
-	0x5ee8f239, 0xf7643f6c, 0x1b7e81ed, 0x1b5e3853, 0xdf491b9f, 0x4e0f613f,
-	0x733cc377, 0x3c9f91ad, 0x05e37281, 0x677bd92b, 0xc2117459, 0xaed3b67f,
-	0x70277be0, 0x4250e95e, 0xeaf3829b, 0x043d9276, 0x10b39a7c, 0x36b93bbe,
-	0xe04bcf9b, 0x0986e4e9, 0xcd9b17c4, 0xb3f0bc7c, 0xc27fbd0a, 0x0391981c,
-	0x974f13f5, 0x534056fb, 0xb512c05f, 0xee873d00, 0xbd5e76e3, 0x7881df49,
-	0x09538762, 0xa11eb95e, 0x62678b8d, 0xf2e9687b, 0x1c7ca3af, 0xde51cf8e,
-	0xd9b904b3, 0xc805e2cb, 0x461adb4f, 0x9f514675, 0x91f38f74, 0x585e655a,
-	0x171ba07c, 0x9994f77f, 0xc87e35e3, 0xbe7cf44c, 0xb57ce3fd, 0x707fae2a,
-	0x65c8109c, 0xe48ff926, 0x1d5d4272, 0xfec8ceaa, 0x2d973d0c, 0xfb633aec,
-	0x1de0ceeb, 0xe6bfa06e, 0x9de7fffb, 0x38df8465, 0x9ed645c9, 0xca797c49,
-	0x748b9fec, 0x5a89aeeb, 0xf3e827e6, 0xeaaf820d, 0x63fec2ad, 0x1f224b51,
-	0x6aaaf6ca, 0x72cbdd23, 0x677fa0bd, 0xc1f7cb8c, 0x1fc126ed, 0x1ea2b4df,
-	0x6641c29b, 0x1c47a885, 0xfd4ebfd8, 0x6a20f94f, 0xe17a87a9, 0x9165a8f2,
-	0x004f9128, 0xcc1b51df, 0x2756d4fb, 0x03406fe7, 0x3268b3f6, 0x48b97d23,
-	0x02b5fb05, 0x3d5deb9f, 0x9fa72eb0, 0xfafa7376, 0xf0056023, 0xf7898f3d,
-	0x82ef60ac, 0x4da67b1c, 0x607ee289, 0x2eeb16de, 0xb5f2117b, 0x7ae2755f,
-	0x8e48576e, 0x569b6bcd, 0x4bea15b2, 0xeb405c0f, 0xd399369f, 0x9b88d2e5,
-	0x2114e2f4, 0x11adeb1f, 0x3fdfd90b, 0x01f21851, 0x74764ff4, 0x53947c23,
-	0x280f1831, 0x10f40dd7, 0x5d83a849, 0xcb93a534, 0x9cf20655, 0x524bd825,
-	0x671ca3de, 0x919ff649, 0x1f52c23e, 0xf4c7b971, 0x527b946c, 0x0aebdf2e,
-	0xae49b974, 0xf5c6ce8d, 0x72e4f585, 0x7842bf73, 0xa42d626d, 0xe81ea44f,
-	0x91e8571f, 0xeb986ad3, 0x2a26eb2b, 0xd117775f, 0x27594b78, 0x57a913e9,
-	0xd783a386, 0x7e0e84bf, 0xed007486, 0xe8b01f8d, 0xe35e3065, 0x9a6d1672,
-	0x44e74bc8, 0x4f5c8fd2, 0xc49eb8da, 0xf43ce532, 0x4c7eb265, 0x7ac987d6,
-	0xf5c2db30, 0x69675c9d, 0xe74f64cf, 0xe594c076, 0xfcc19511, 0x3ff9a636,
-	0x60349cce, 0xb2de84d7, 0xb10bf4d9, 0xe0a3601e, 0xd369c5bd, 0xf686ca6e,
-	0xc8fcc690, 0x9780a957, 0xbb7cf09d, 0xb36b7bb0, 0x2d7bdd39, 0x5acd7e9c,
-	0x703b9580, 0xcfb4625d, 0x1732678d, 0xe7c4a3d2, 0x577c2776, 0xfd71df81,
-	0x8dbdffd4, 0x7c24a5b5, 0x9d9cfd5f, 0xcfe7eae4, 0xb256233a, 0x6e858247,
-	0x57eb2fe8, 0x7b53b256, 0x3e92739f, 0xd0fa15ed, 0xd128f683, 0x5fae2acb,
-	0x21275d71, 0x648f5535, 0x35cafb48, 0x4a045123, 0xcdc9acfb, 0xf6c1aced,
-	0x8a2f6890, 0xcae9cf5d, 0xcfccfb4a, 0x62773ddd, 0x6861e01d, 0x588fff9f,
-	0xe981d0e7, 0xe787dfe5, 0xc7c380a1, 0x472c1fb1, 0xdfaab57a, 0xf406deb9,
-	0x1e5d4335, 0xd1e60bbf, 0xa170ef94, 0xfc29ab9e, 0x846f2ff5, 0xcc0787fa,
-	0xbceb8acc, 0x1b1d7a67, 0x5dfcbc35, 0xe89f3112, 0x5b97e049, 0x4deb19f6,
-	0xa87ac69d, 0xc82f58cb, 0x4f4e7a70, 0xfbe1d920, 0xd5b5d033, 0x4ec1f2da,
-	0xbcfad780, 0xa7d1f495, 0x067160ee, 0xfc535bca, 0x5ad9e218, 0xf444f1f8,
-	0x3fba846f, 0x02b4b051, 0x38cac4ed, 0x3faf91fe, 0x742bcfb7, 0x01b7810d,
-	0x899b31fc, 0x3ad60cf0, 0x85ce492f, 0x2c789f04, 0x845f0ffe, 0x9d9a2ff9,
-	0x9e9bbae2, 0xaa4e67f8, 0x60927b42, 0x572da164, 0x2dfb887f, 0xae096f78,
-	0xf059e9ff, 0xb0d5c01e, 0x46c3eb85, 0xbe434b16, 0xd3bb066d, 0x477c4b06,
-	0x5b875f06, 0x5155e2da, 0x8c8edff8, 0xa70871da, 0x802d27f6, 0xfb1ab1f4,
-	0xaf93b04d, 0xe07ae0cd, 0xd7767d96, 0xdd1e0329, 0x2ba87a86, 0x912a75c7,
-	0x61fc84ff, 0xb8968a79, 0x09577a1f, 0x6bf88b5e, 0xa658f5b2, 0xfc57f8c1,
-	0xf79233e9, 0xa7cd978b, 0x5d80c47d, 0xb4f9256d, 0x3d20aef8, 0xdf2b697f,
-	0x6ade9e17, 0xa7ef11d7, 0xe3fdf3b7, 0xc4473ce2, 0x857bff06, 0x8bdbdb9b,
-	0x19453be1, 0xbc64c78c, 0x55f0ffbd, 0xf7a3a45e, 0xdc2f1f19, 0xf78fedc9,
-	0x62af805d, 0xf7f60efe, 0xefd8177e, 0xaaf9e20a, 0x2e2e510f, 0xd0faaede,
-	0x9c87604e, 0xbc598fe4, 0x0b71cafd, 0xa7dfd81d, 0x5fa1a623, 0xe895c768,
-	0x02f7c289, 0x89d7ee11, 0xb5cf015d, 0x1d93171d, 0x95bb7477, 0xedb6e9c3,
-	0xf15c79c5, 0x4af89527, 0xda20b133, 0xff161dc7, 0xfd67e438, 0x70333de1,
-	0x959fde5d, 0x1ff7a26b, 0xf10b9857, 0x85965ee1, 0x5a2b17cf, 0x61b7f900,
-	0x899992cb, 0x866a4ef6, 0xad35eb4a, 0x8f567970, 0x7ae9f883, 0xdb4da3d4,
-	0xfc707f81, 0xf2ff6fd9, 0x3f224f46, 0x4cc55edd, 0xc3cbf609, 0xc27a235f,
-	0x6be028bf, 0x57d7c0b1, 0xaa6b2be5, 0x12968be4, 0xef8ba394, 0x0d71296e,
-	0xf3f45761, 0x0f9cc3c5, 0xb850cbef, 0xc32f20ff, 0x6e18cfb0, 0x3528e65f,
-	0xf9b15e91, 0x940f7f98, 0xc62db0d9, 0x0c81f7fd, 0x640fda8d, 0xfb5f7b70,
-	0x5efb6ddd, 0xcd4d7987, 0x80cf6e08, 0x97f3217a, 0x71ebbae3, 0xb1983557,
-	0xbbb26288, 0x6e56c3d8, 0x8edc6ac7, 0xf6c99cde, 0x8fd84bae, 0x997f6277,
-	0x62f61724, 0xffc7bd3f, 0xdaf10c78, 0x44f1f05c, 0xe7420fb4, 0x1fa0b33e,
-	0x90add1cd, 0x02f8773c, 0xd425e90c, 0x282d8b3d, 0x21c3901b, 0xc913d71f,
-	0x0653faf3, 0x3c84efdf, 0xfde7ea71, 0x3b7f9c11, 0xb73e9cdc, 0x3f214b2d,
-	0xc44f36e4, 0xb5ff408e, 0xa5ed2a7c, 0x67efc225, 0x5f94fddb, 0x288efa45,
-	0xd75831ae, 0x35f47f39, 0x30a88dcc, 0x8bbb87ce, 0x77d9dfc9, 0x854f9a60,
-	0x1feec736, 0x788519ad, 0xf0fb32ea, 0x27af877d, 0xe1f7e70d, 0x386993ee,
-	0x2add86bf, 0xf221bbcd, 0xb2c2d649, 0x33f0b901, 0xca3af825, 0x1c52e601,
-	0x0f94be38, 0x34feee1f, 0xfb83816b, 0x567f480b, 0xa7978d0e, 0x8e7ed3dc,
-	0x39715fdf, 0x1e8f975f, 0xee5046b7, 0xfd07647d, 0x3f6f2096, 0x777d7272,
-	0xefee432a, 0xdf500b3a, 0x2a6fd7f4, 0xf89ca135, 0xdfcf8b8e, 0x402ce963,
-	0x628dfc7e, 0x1ae967ec, 0x6c808b13, 0x5006b25f, 0xa3e8f203, 0x40299f47,
-	0x9ee1ff79, 0x27e60a67, 0x9dfc97c0, 0x78e57b2c, 0xfd266fc2, 0x344b1ea8,
-	0xef9bc70f, 0xe57f72b3, 0xf9547e30, 0xfdc2db3e, 0xab3e7da1, 0xbf28748e,
-	0xf1486beb, 0xc7db7da3, 0xe6ff246c, 0xacbf0b77, 0x83da3fdf, 0x7df918fb,
-	0x1e15ff52, 0x974a4f4e, 0xd483fe42, 0xe3c938b2, 0x7bde59bf, 0xe4133d60,
-	0xbff3ac3d, 0xd9345f21, 0x3246c7e2, 0xe20b0fa2, 0xd0ecd2cd, 0xad653f50,
-	0xbf15f4e4, 0x2afb44c3, 0x81d7ae4b, 0x928aecf2, 0x30133694, 0x6d2527a2,
-	0xf201c622, 0xfde94b73, 0xfba73570, 0x7f231670, 0x516b0e5b, 0xb8bb5e48,
-	0x326f3edf, 0xea83ad73, 0x9edc11ac, 0x16df32f1, 0x5dd698b5, 0xc490ff41,
-	0x480bd487, 0x3f1f283f, 0x3f446c52, 0x7642b74a, 0x9cea6aa7, 0x470efd8b,
-	0xc847134f, 0xa7a73ffd, 0x893ffafe, 0x188f269e, 0x3a829e8e, 0x36d793d1,
-	0x3f093d34, 0xcfbf79f1, 0xbfdc01c2, 0xdd7c0b66, 0xfc4ee427, 0x9bf49b0e,
-	0x99df382b, 0x3699bfa2, 0xfd455447, 0x9c7f33e1, 0x187dffe8, 0x27dc5fec,
-	0x0efda0e5, 0xf395c8e5, 0x16375a74, 0x417f41eb, 0xd236c5ea, 0x629af78f,
-	0x64af6845, 0x8fd96f8f, 0xb73d9174, 0xed2562ac, 0xa8dcf2ff, 0x92b7500f,
-	0x7559741f, 0x0488d4e0, 0xdf10e17b, 0xe5df34cf, 0xbbd3e7a7, 0x1a107db9,
-	0x387b216d, 0x7184a5d4, 0x96039b9d, 0x6b41da08, 0x095fee15, 0x3cebb06f,
-	0xa0afa3ee, 0x740fcfb8, 0x488a171e, 0x8ecf6fff, 0x35bd23ef, 0x91efc838,
-	0xf83a3f1c, 0x1fc7ca85, 0x8efc68c3, 0xeaaf1e72, 0xfee75ab8, 0x1d7eb115,
-	0x6e39fcb3, 0x18d607b4, 0x85c659f9, 0x18809cfa, 0x7afe6f18, 0xae43ad3b,
-	0xd2ccf1ca, 0x0cff5c6d, 0x67e40b96, 0x162c9ace, 0xfa6fc446, 0x05241cf9,
-	0xbb4573d6, 0xcb39378c, 0x79684502, 0xb7e9bbbf, 0xbd00a4af, 0x8e9fa166,
-	0x68c2ca6f, 0x987f93f7, 0xfc7dc9d7, 0xc90009a0, 0x5cffd6c5, 0x42697357,
-	0xf03fbc5d, 0x6b6bdcfd, 0xf6ef48f2, 0xa0d823b7, 0x6fdd658f, 0x351e31d7,
-	0xbd81aed0, 0xf852eb6b, 0xb5c761f7, 0x3c068e57, 0xfffc7228, 0x7f47eb5c,
-	0xc6199da1, 0x4b4f844b, 0xfd0cdfea, 0x7ef9743b, 0x784af6bc, 0x590ac1e1,
-	0x1fad66bf, 0x6ccfbbe0, 0x2a508fec, 0x1c8ac7be, 0x6dacd6ef, 0x0de7d6eb,
-	0x276005d8, 0x39911aec, 0x7eac1f60, 0x85fb667b, 0xebaa5630, 0x5dea0b53,
-	0x1e43e7a9, 0x648fec85, 0xe4203d7e, 0x572cdfc3, 0xf47641f5, 0x57241181,
-	0x4b20667b, 0xe483fec2, 0x80796876, 0xf6073da1, 0xdbc21748, 0xd3e3fc7b,
-	0xef7b422f, 0x1b1fdfec, 0xb77be3a9, 0x37bb45ce, 0xba234e74, 0x2353ed0d,
-	0x4dadd00a, 0x71e80bf0, 0x7a480b8a, 0x7412ea5a, 0x8c330eea, 0x521c7473,
-	0xbe898526, 0x83ae0a5a, 0xf8f7ccb5, 0xe438425f, 0xde7932be, 0xf7c11ebf,
-	0xead2a10f, 0xffd825ad, 0x9da1856e, 0x44f4aeb0, 0x37da02d6, 0x30b59bbd,
-	0x5d25bbe1, 0x973e120f, 0x890f33ec, 0xe08f5fc7, 0x67e6de71, 0xdca3f69f,
-	0x90a228f8, 0x22d0684c, 0xbd40a76b, 0x9684c1a1, 0xcc8cab20, 0x1ce291bb,
-	0x06361675, 0xed0477e6, 0xdf638426, 0x7053c337, 0x814ff0de, 0x8b02db47,
-	0xab6e9f48, 0x4e2839b3, 0x56ff3a54, 0xc52b83c2, 0x5758788f, 0xe3839d5a,
-	0xe19acf34, 0xd808f8a2, 0x7cded871, 0x2fc8b7d7, 0xd75ae124, 0x3b45ae65,
-	0xb9ec0aa7, 0xfcee00a7, 0x7d6a6b8c, 0xd523c7c0, 0x3bb7e5fd, 0xb43e5e30,
-	0x266eff1c, 0x25368ba7, 0x2546fe10, 0xa25941f9, 0x8bb0b35f, 0x8d9f8ddb,
-	0x2be218b0, 0xf6e08d9f, 0xd8e1a5ec, 0xc39f2474, 0xda2a4f5a, 0xffe621d3,
-	0x2ccff704, 0xd0f7d0e0, 0xe479713a, 0x3fc9d569, 0xdcf4f366, 0x5fb6217b,
-	0x85fed1aa, 0xe00f3d69, 0x3d6bbdb8, 0xf04c75be, 0x2aefd601, 0xbd4f7da3,
-	0x3278a827, 0x7d70bcf9, 0xaabd9f7b, 0xd288fd1c, 0xa8fb5aee, 0x5ae6f49d,
-	0x2d7f7ea7, 0x69dfd3ca, 0x16c01f3c, 0x7e874d8f, 0x833efe96, 0x8f6b5dc6,
-	0x0ff5c5ac, 0xbda954ef, 0x607411d8, 0xb9be4bbf, 0x2bd22265, 0x504a4473,
-	0xed3d9a8f, 0xb618e90c, 0xb12fe42b, 0xe30c0279, 0xf3c3d3c4, 0x45f50534,
-	0x1d333d92, 0x5fb455fd, 0xb6bf90f1, 0x18c7f05a, 0x36d382a0, 0x3fb68562,
-	0x6fb0188f, 0x1ce3f95e, 0xbb4a1f0d, 0xfee364c7, 0x14ba9af3, 0x5b2df686,
-	0x42663f15, 0xc627bd7f, 0xea6e0ed0, 0xa69c6854, 0xb82d27d2, 0x93a5b96f,
-	0xec4877f3, 0x057f0033, 0xf18c5768, 0xa07b0aa4, 0x5839fb8d, 0xc448d8ec,
-	0x3d7c63f3, 0x12f78319, 0xad8cabfc, 0xf440f2e0, 0x86711167, 0x0257e126,
-	0x3eed484d, 0xef5bb48f, 0xf3b7fd16, 0x59bb8c52, 0xc455f989, 0xf062b96b,
-	0x2af2cb87, 0x91fa7df1, 0xdfe40cf8, 0xfa17d038, 0xb32ab697, 0xcc29fd6e,
-	0xf1a4eb6f, 0xbcc1343e, 0x056a4e40, 0x0452073e, 0x7d7657bc, 0x86e90332,
-	0xd7e232d5, 0x6a69aee6, 0x6fc78393, 0x4ec85ed0, 0xed89d96d, 0x929737d9,
-	0xc8f8c67e, 0x35fe786c, 0x1cb3e70f, 0x79d7f707, 0x61170eef, 0x48fd33bc,
-	0xe29fd6e0, 0x90a417f8, 0xd61b35bf, 0xe54199c6, 0x796ff41a, 0xa88bf959,
-	0xf533bd7f, 0xc647840a, 0x382e30f5, 0x38e48cab, 0x8a7c33d5, 0x3794177f,
-	0x0e34dc78, 0x116aefec, 0x711e7c5e, 0xd119c40c, 0x62e3876f, 0xdecb0f1c,
-	0x7e46a89c, 0x7be7d07e, 0xacbb4e90, 0xccd7c42e, 0x42df97ae, 0xc6d33b7d,
-	0x9aee293a, 0xd3c4b764, 0x3a4419be, 0x7a733bed, 0xd7083dc7, 0x947d0775,
-	0x8f6492cf, 0xb739715c, 0x93da3fcb, 0xec3f23aa, 0xec1b7212, 0x797f1e47,
-	0x9323ef9c, 0xf6efc8ed, 0x23b72faf, 0x777febfb, 0x17c3923b, 0x28f3c3de,
-	0x890f7ca4, 0xc35f5f7d, 0x5fd434d9, 0xaed23d2b, 0xd8f7ca4d, 0xba3df22d,
-	0xd0f7ce87, 0x0ff8f276, 0xee494186, 0xae222dba, 0x43cef7e5, 0x84bb87ff,
-	0x7b2bc0e4, 0x3748c353, 0x64ed3b67, 0x4b6e6997, 0x7b6ae114, 0x3cc11ada,
-	0xe0453688, 0x578890eb, 0x2c1c4459, 0x834744a3, 0x4025a0e2, 0xa4fc3f72,
-	0xd2abc799, 0x85ee8f22, 0x1ce1e37a, 0xd462cf11, 0x54d9f87f, 0x8a6377c2,
-	0x37fd8e9e, 0x8608fbfe, 0x183eaa71, 0x09f9d70f, 0x87bb707b, 0x7fbc5ae2,
-	0xe75582f6, 0x8968b3f1, 0x33b0f01b, 0x93bfedc2, 0x05a8a6a5, 0x8993bde6,
-	0x32f59f3c, 0xd9e7c5ae, 0x8f2461b7, 0x8231a0cb, 0xdcb5b2fb, 0xe32f545f,
-	0x1fb98755, 0xa5c45eae, 0xf45ece4e, 0xb458a608, 0xb8b52d29, 0xdd7cfb4f,
-	0xdf9ff234, 0x2a2cff79, 0xfd18d7eb, 0x3fd08bfd, 0x3f103c5f, 0xf9f77e96,
-	0xf6e167cc, 0xd0ff80f3, 0xbe8cf604, 0xfd46ab46, 0x775cc459, 0xc3d03ea3,
-	0x43177ab0, 0x1a2506d9, 0x19600af1, 0x7ad6d3de, 0x57bd7052, 0x6f4899b7,
-	0x7e4cdb85, 0xcbd24f7c, 0x67ae1eab, 0xbd70f5df, 0xe08ea803, 0x336cb238,
-	0xe883788b, 0x4533056f, 0xbc2934b1, 0x6ad2ed5c, 0xb2dfd287, 0x8b7336bf,
-	0xcdda1a6d, 0x77f226f9, 0xd7f16e7f, 0xa338bf91, 0xcda9d684, 0x96a6b2d9,
-	0x7d2f13b7, 0xa8078f6e, 0x1b8d32fd, 0x40cf4c96, 0x8782fa79, 0xf19217c7,
-	0x58ddb0b6, 0x2cc38e4f, 0xf5eb1889, 0xa736382c, 0x120dc798, 0xf420bf9f,
-	0x8aebe7c4, 0x167dbe04, 0xfe72bb94, 0xde38f22b, 0x1cbcf94c, 0x875d5f95,
-	0xe30a3074, 0x725845ca, 0x84cc2abf, 0x99751fe0, 0x48fa2147, 0xcdcdb782,
-	0x96bc29e9, 0x5aff21fb, 0xfee193f8, 0xf82593d0, 0xb8c5efd8, 0x42cbbd65,
-	0xf5f3e871, 0x1a64a497, 0xf5fdb7f7, 0x96feffbf, 0xaad7e7ef, 0x45c6bf22,
-	0x8bbe6972, 0xe2a4e5cf, 0xe7c51bdb, 0x701fb00e, 0x0ad56b1e, 0xbfd32394,
-	0x3479a0e9, 0x8239061f, 0x3de5ac71, 0x9bd7a805, 0x304a7bab, 0x5f8c935e,
-	0xf2935684, 0xef9bde0c, 0xda08fd81, 0xf18c6b0d, 0x55f1c1b8, 0x2666617f,
-	0xee4e7bee, 0xd7f5197f, 0x2fe93b7e, 0xad17bff8, 0x16cfffc8, 0x388b5c91,
-	0x2e316383, 0xee894a14, 0xda1171f8, 0x6a8edc31, 0x44eeb6ea, 0x5b7e713b,
-	0xff0f7c42, 0xef18deb3, 0xc8326b63, 0x8c3aceef, 0x4e1e1bcf, 0xfc506efa,
-	0x65d69daf, 0x0e3825b3, 0x10f41df9, 0x599c1de5, 0xbeb86262, 0x116faaf5,
-	0x7633a92a, 0xc67e7da3, 0x466bd7c9, 0x3e3fd4a6, 0xebfabfb2, 0x57d9d683,
-	0x6f5ceb82, 0x7ec4c162, 0x619d709a, 0x3ac51b7d, 0xe2fa799f, 0x8fe75c12,
-	0x825c5ff7, 0xdcd9bceb, 0x29be47ee, 0x41af0775, 0x32ba9cfc, 0xe615f640,
-	0x9d1f20ef, 0x94de3d2f, 0xfd378f44, 0x2eb1e8e3, 0x59321f31, 0xe3f4363f,
-	0x3d1fa8cb, 0xe50f3d16, 0xf59b7cc1, 0xfc49ea2f, 0x679fd21b, 0xe3ff92b3,
-	0xdd3f1ff0, 0xdd18f948, 0xb227d92a, 0xb05ac3bf, 0xc3a3ed18, 0x617d796f,
-	0xd3fef865, 0xb5e5fd85, 0x59fa30b1, 0xda40bee4, 0x78f2c997, 0x03cf98b9,
-	0x8cdffe99, 0x3ce21bf8, 0x20dc7fd2, 0x3e45b1de, 0x6eef76e5, 0xc7fdc7c5,
-	0x6e4fe49d, 0x85cf343e, 0x220fe2fe, 0xfcdc7fdc, 0x8ff93974, 0x8a5e4497,
-	0xeb193e62, 0x1fb85c56, 0xddfbb259, 0x9003cc34, 0xe7d85efb, 0xf9499fde,
-	0xeffdc635, 0x69939107, 0x70003798, 0xa7708fbf, 0xa416e27a, 0xffd866fb,
-	0xb360de61, 0xfd863f16, 0xd9187b36, 0xc65d9505, 0xef8ca0fd, 0x48580b6e,
-	0x56eb6eee, 0xb3af2822, 0x3ca2c12c, 0xcf2c6bd4, 0x80753a75, 0xfe9922cf,
-	0x077e9017, 0x5dfeeae2, 0xa7fe9758, 0x44e9ad9e, 0xe6663dbf, 0xdb3ca177,
-	0x4cf214ea, 0xdbf6f923, 0x7591dd87, 0x6fc37609, 0x584edc23, 0x34c1f322,
-	0xbd60d516, 0x1ff1cd16, 0x7946f5c7, 0xf7924d1f, 0xaf197589, 0x494585bf,
-	0x9eb1352f, 0xc4b0bcfe, 0xf9e392f7, 0xf4370718, 0x75ca5ac3, 0xe4dd93f4,
-	0xab9c51f0, 0x6356cfeb, 0x9bef987b, 0x55961f81, 0x5cafd00c, 0xcdbf4907,
-	0x6a1d1fc2, 0xe90ab138, 0xb8a5d437, 0xe8dd7f70, 0x08dbf4e3, 0x9bcc2ffb,
-	0xd677e64d, 0x1d13cc69, 0xdd7fff8e, 0xff9c77cf, 0x9cac3d7f, 0x5bf8c7fa,
-	0x3f97efdf, 0xfce5ef9c, 0x7fbeffa5, 0xe70add9e, 0x2579a4cb, 0xfd935bef,
-	0x79df72ee, 0x8bf0f2be, 0xf17c7c24, 0x70c7c60f, 0x6b2530f2, 0x7242fde8,
-	0x96afe35c, 0xf8e0ff87, 0x1e8723c6, 0xa881334a, 0xf6145258, 0x6fcebb72,
-	0x50cf1788, 0x371e7e1d, 0x453e7955, 0x9f5ddc72, 0x9ceee221, 0x5a7a5f9f,
-	0x126af5a5, 0x43a6e1f1, 0xdabe1f4e, 0xf14c58e0, 0xe9f8e4d9, 0x067fb652,
-	0x1c72512e, 0xb8f911b5, 0xa9e3cbf8, 0x3d396517, 0x56749f24, 0xc90a7984,
-	0x392f5a79, 0x4c111d3e, 0x32eaef58, 0x410c08d8, 0xcc2d36d7, 0x4f9e1232,
-	0xf4f6e2cb, 0xc89f224b, 0x05e7e16b, 0xfaa673ee, 0x35e31f71, 0x7ca77cf1,
-	0xd67a604f, 0x02ef9424, 0xc0decf9f, 0x4797804c, 0x4f249dcc, 0x1f0e4dc2,
-	0xc7e93fca, 0x10effd91, 0xa5f38b71, 0x19676ff3, 0xfebfbce9, 0x85fbe24f,
-	0xdaffbe92, 0xc016ddb8, 0x181f818d, 0x186befd1, 0x4c1a2a67, 0x33f5c3b7,
-	0xcb2efd1c, 0x459edc0a, 0xa44ff178, 0x94f3e6fc, 0xf195a92f, 0x622fe893,
-	0xfa3aac07, 0xfce26d37, 0x239f5b0b, 0xaabeebf6, 0xcd979459, 0x73c88fcf,
-	0x8fd9c336, 0x9ff9fb1b, 0xf5fd8fdb, 0xc8fd93bf, 0x9c7681dc, 0x7e69a9e7,
-	0xed5ffbca, 0x5f71f804, 0xc875a8f8, 0xdcf22cf3, 0x5df997c5, 0xcdc3f6f6,
-	0xb0ef6ae9, 0xe563ff70, 0x34ff93e7, 0x34fbf9f9, 0xdf0ea3f4, 0x7be4584f,
-	0x9e22fcc6, 0xf82576c6, 0x9e3143b7, 0x8092f7af, 0x447f3e57, 0x6cf4c5e8,
-	0xa75c51ff, 0x6cdb8f8f, 0x9e4c1d2c, 0x9b172e4a, 0x2f8a0e03, 0xbcf27734,
-	0x8ce5e697, 0xfa3377e4, 0xafd0cb4f, 0xbda18b38, 0xf8233537, 0xf57efc33,
-	0x9ab08edb, 0xd9f77e8e, 0xdebbed0c, 0xa9febce3, 0x6c73f83b, 0xa1ef2d0f,
-	0xecc74678, 0xaaef288f, 0xae9fcfea, 0x7824adaa, 0xb1e08fc9, 0x7cadcf1a,
-	0x0fe3c591, 0xbf43fcb2, 0x5f93f13c, 0x9e06e3ff, 0xf8f21d9f, 0x908fe85d,
-	0x3d54f17e, 0xe6a67e46, 0xab68dc03, 0xd87cf952, 0x9e88f3f7, 0x2b4c0f9a,
-	0xeb29ff47, 0x9da397b4, 0x072bf55b, 0xbe3ef7ed, 0x24f2972b, 0x0fc13dea,
-	0x2b3a3e51, 0x5da35723, 0xa0e3085a, 0xfef1fbbd, 0x6e11cbab, 0xa336ff29,
-	0xdfc61cff, 0xc7fa34ec, 0xd9e78d99, 0x4f9bdd2f, 0x4762cbfb, 0x6fec53f0,
-	0x11c39db3, 0xa3ce23de, 0x3279bf08, 0xcfbe4bff, 0x4e344d56, 0x146db7f6,
-	0x6172972f, 0x6d0599b3, 0xe4f203c5, 0xf22e9678, 0x635e444c, 0xa79e2cf7,
-	0x8f0eea22, 0x81f3bf31, 0x238f2bcc, 0xb4b3c73c, 0xe61f96af, 0x402f9418,
-	0x187e62fd, 0x9c5805c5, 0xe7a92dfc, 0xca3d1db8, 0x727a2165, 0x9c51df02,
-	0xed09e806, 0xb1e34bf9, 0x6b9e78e9, 0x52f44774, 0x73e1f3c4, 0x3693c226,
-	0xd38a35eb, 0xbc7c2ba4, 0x6b3df5e2, 0xc61fa2c7, 0xb865e6f5, 0xabbb7aa4,
-	0x353a511a, 0x4d9f9023, 0x52968cfb, 0xbffaaf1c, 0xf29f3ccc, 0x17f92a50,
-	0x291a0a3a, 0x6df7b29f, 0x4e3ce1ab, 0x77661972, 0xa8e4fe53, 0xbc505fae,
-	0x194079c0, 0x72762f32, 0xd6f083b6, 0xa0cd8e1c, 0x3d4b9b1c, 0x43b56724,
-	0xb538a2bf, 0x094356b6, 0x7eccdac4, 0x0b439e13, 0xefe460af, 0x32e1d31c,
-	0x8a157ae1, 0xc3be98fc, 0xa418987f, 0x0f8c8afd, 0x937e7844, 0xee1567b9,
-	0x3d15b4c3, 0x3d718797, 0xcd4db80e, 0xbc5fd865, 0x872dfc99, 0x4fd21952,
-	0xddf15761, 0xb85ea153, 0xb0f145c6, 0x296ee7be, 0xcc2aff24, 0xf310cc73,
-	0xf336ca2c, 0x9aa50ffe, 0x9b699f50, 0xd5470f98, 0x04d559dc, 0x875083f7,
-	0x3c8a467e, 0x453f1955, 0xa9ea143f, 0xd7e0ecf4, 0xffb63f30, 0x14b2d21c,
-	0xe3490e7e, 0xb2e712fe, 0xf3c71fb7, 0xfc2c3b3d, 0xc391e79c, 0xdf936613,
-	0xe0a6ad6f, 0xe6ee7c3a, 0x663794f9, 0x42e70c9b, 0x847ff006, 0x1d4756f2,
-	0x6bd705fa, 0xaff61630, 0x68bd3999, 0xd13b3d6b, 0x2d38b8bf, 0x97ba7948,
-	0x8a5545b5, 0x3d4eb99f, 0xec27ab50, 0x3d70b673, 0xef8fbcd3, 0x35f793cb,
-	0x6e5fa65f, 0x2dda36cb, 0x927ff5fd, 0xfe83f2dd, 0xfdc6fff1, 0xf3ee330a,
-	0xe497ed92, 0x3b20dd7d, 0xe1bfa93c, 0x8f9918ec, 0x0e303d52, 0xd29da7b7,
-	0xf21b0a4e, 0xe21daa75, 0xd8cda17c, 0x5c23e5ff, 0xbf995f34, 0x5f52b593,
-	0xf1fa7981, 0xd7f2301f, 0x70a23cc9, 0x09f7cf35, 0xee746c9b, 0x29dacbd0,
-	0x8b24687f, 0xd3f90a2a, 0x6d7ce87a, 0xc111e636, 0x47b2eb77, 0x99dbbf51,
-	0xf24a8d6f, 0x6e105752, 0x509fe63b, 0xeb646abe, 0x3ae71c22, 0xc7638d07,
-	0x308b93fc, 0x15bfc085, 0x06f4ebe5, 0x05c85f1e, 0x9bf48c7d, 0xa1d39a3b,
-	0xa1e78ebd, 0x99133cc8, 0x50f12217, 0x3b9bf02d, 0xca115176, 0xf04ab5c1,
-	0x99ae7151, 0x4e0dffcb, 0xec195e71, 0x79c0cf6b, 0xfbc63ee4, 0xf898370f,
-	0xaf376479, 0xf9d18c77, 0xf82fa079, 0x728ebb39, 0x2832779e, 0xaf09253f,
-	0xc9e53f32, 0xe411e0b4, 0xcbf3e497, 0xd6124e92, 0x6f47ce8f, 0xfaedc43b,
-	0xcd0b06ea, 0x35c96fa3, 0x5bec97e4, 0xffa86262, 0x9cadbbab, 0xdbc692ee,
-	0x51616756, 0xd88b57ec, 0xf5ca7e51, 0x16bb32ff, 0xfd14b5d6, 0x6b5a47be,
-	0x38053a2f, 0xa01ada3e, 0x74aecfb2, 0xf9d217aa, 0xa928b9d2, 0xf9f2d89e,
-	0xe60e5ab5, 0x140bc4db, 0xb7e79920, 0xea93347e, 0xb077f199, 0xcf16eafe,
-	0xc39034d7, 0x3be2637d, 0xffff7814, 0xdbc47f79, 0x19731691, 0x87a1f77b,
-	0x5f1d8666, 0x91fddf41, 0x9c71e725, 0xc4d3bd41, 0xc8c5567a, 0x5df4245f,
-	0x5e879725, 0x25ec8587, 0x653fc8af, 0x151f2235, 0x5f503b23, 0x714e5399,
-	0x0fd3077b, 0x8f3db0c4, 0x7682cf9f, 0x6395ffa2, 0x26da7fb8, 0x49e582e8,
-	0x184f54bf, 0x22cadbe5, 0x2fdf7d37, 0x23580f8f, 0xc7c63fdc, 0x0be9e37f,
-	0xf325be28, 0xe573196a, 0xf280b9cf, 0xfbf50c6c, 0xa61ce2ec, 0x73c7cae6,
-	0xc2cd2bec, 0x36f515ee, 0x8bc53067, 0x043e44f3, 0x2b8dee7b, 0x7c865bbf,
-	0xf7e0e674, 0xbb5ca347, 0x82fb02ca, 0xeed8e421, 0xfac72e1c, 0x0a358ecc,
-	0x0ce3577c, 0xfac2f08e, 0x773a95bf, 0xa8291e06, 0x82cd311b, 0xf8581747,
-	0x9af11551, 0x3dc4e829, 0xaee7c387, 0x77982809, 0xc7ced2ba, 0x7e6a0ccd,
-	0x9c10f73a, 0x70075ca3, 0xbcb854af, 0xc9d28f86, 0xd3d52a8e, 0xa3611cf1,
-	0x0aaad738, 0xe74971b9, 0xf5ed1526, 0x35beb79f, 0xe006d355, 0x878885fb,
-	0x78c8a2ff, 0xcbdca23e, 0xce5962ed, 0x900bf556, 0xf0ad56fe, 0x12f336bc,
-	0xf8e9ce7c, 0x9565b4ca, 0x557da798, 0xfa254b6a, 0x4f3d0769, 0x0965e787,
-	0xaf7f2b75, 0xc02f16d1, 0xed0be673, 0x8f8849c1, 0x7bbde7cf, 0x3b87ca27,
-	0x0778df73, 0x30de24f3, 0xaf91390b, 0x98eef588, 0x79eb069e, 0xf22dd8ac,
-	0x0f446c3c, 0x3f72c6c7, 0xdb1e7f64, 0xfaf28538, 0xe7e1ce66, 0xb165af49,
-	0x9ef81eb6, 0x3ed0159c, 0xd9117263, 0xde453391, 0x02b78cc5, 0x9817e869,
-	0x435c4371, 0x5d9c3a39, 0xacd79574, 0xc3f024f7, 0x7eb1bad5, 0xfeb1a96d,
-	0xfeb19f35, 0x1a7fc98d, 0xd97f589b, 0xf48d9fee, 0xf3c2bcf4, 0x3097c33e,
-	0x47bdd117, 0x32fda309, 0x715c99e1, 0x27e7970e, 0x77d8abfe, 0x5199333d,
-	0xdb3ed67b, 0x20373c2e, 0x68aad7fd, 0xb665e09f, 0xef7e0cc2, 0xb8bbea03,
-	0x3d1cf222, 0x0761d314, 0x3f71756f, 0x816bbc2e, 0xd3ce0e7e, 0x46aa3f89,
-	0x4e9052da, 0x76261cb2, 0xa552f239, 0x239aec8d, 0xb9e4ee82, 0x058d2aea,
-	0x8602cf30, 0x1be5839c, 0xe88bd766, 0xc87f0ea7, 0x69dbe718, 0x8a5be51a,
-	0x415b1831, 0x5d0487f5, 0xfff2911f, 0x57589a07, 0xef1840e0, 0x1e5cfaec,
-	0x74652e87, 0x656cfe5e, 0xdd25d509, 0xae01fe4b, 0x41a18d1e, 0xe927f445,
-	0x0b4ea7f9, 0xbf7a83d1, 0x34bbf849, 0xea590213, 0xb8807092, 0xc93d42c9,
-	0x7195fec8, 0x6c9b7cba, 0x7ef8fcd7, 0x7e75930e, 0xd44b2bde, 0xaa6a29a1,
-	0xf2fcfd40, 0x3b7f48ef, 0x879c417c, 0xe746cd25, 0xa3e38693, 0x767f825d,
-	0x4b91f125, 0xe8f89abb, 0x3b92cea7, 0x9c6bee08, 0xa5afd42e, 0x0cba9730,
-	0x2a23fd2a, 0x4fce3bf0, 0x474f8a6a, 0xed66f9be, 0x825aa9f1, 0x9bef869c,
-	0xc6a9f7f8, 0x7df0bdef, 0x69f7c246, 0xe0d97df0, 0x6d3b77ef, 0xec44d351,
-	0x21ef4aa7, 0xc9a5187d, 0xade6235e, 0xaeeff166, 0xa3b17911, 0xd47de0d3,
-	0x3cc6a55b, 0x67d93613, 0xa4e4fca3, 0x94ab92bc, 0x57c839e5, 0xba9adb57,
-	0x97bfa07b, 0x655e3ac5, 0x82e67e0a, 0x2dcf2fe7, 0x57fc8a39, 0x98688b6b,
-	0x8b2d77d7, 0xedc5c2ae, 0xc47c169b, 0xe1f24c5d, 0x6693e459, 0x03363835,
-	0xedcc67ea, 0x222d6fa3, 0x9bce79fe, 0x495e1839, 0xa45e1227, 0x493fa417,
-	0xf770c92f, 0x3bd7e7af, 0x3b6f1129, 0x4a5851d8, 0x16b18abb, 0xe7ad779e,
-	0x880bcc0f, 0x65ad8668, 0x2f35da34, 0xdc93092f, 0x00fdcab8, 0x9cbd65e5,
-	0x944ffc1b, 0x7e177567, 0xcbe1a052, 0x716379de, 0xc6f000df, 0x95e137fe,
-	0xbca0e3f6, 0x862d0fe3, 0xf8e1e3bc, 0x421b8e4c, 0xfcc550bb, 0x47949de4,
-	0xf0e39a1c, 0x109179e1, 0x5256c1e6, 0xc2ec8afc, 0x6f6e14e7, 0xb09b1587,
-	0x3f37cee3, 0xaf7b7199, 0x33dedfa9, 0x9477d7e4, 0x6e3bb873, 0x35fde5d5,
-	0xc79c5edc, 0x4b393db8, 0x51742fb4, 0xefc3ccbb, 0x86fdc9d8, 0xd58f4f1d,
-	0x03b05fb1, 0xe9607ec9, 0x322ccec2, 0x7f839bde, 0xde40d64a, 0xb73366f8,
-	0x7c99b75f, 0x62e79455, 0x9ce2f7e1, 0x318cfe91, 0xff64fc7c, 0x628e6e62,
-	0xd7f74f88, 0xc5fe4eff, 0x3f307752, 0x585bfa07, 0x4c502fe6, 0x33f71708,
-	0x1c3e7d02, 0xd6fe9863, 0xfeed1a32, 0x9bcb59ab, 0xcfa262a6, 0xcfa41ce2,
-	0xc59f4009, 0x9d1cfa06, 0x24e5c993, 0xb3e925c2, 0x934b2e9f, 0x1782caf3,
-	0xee1d3f60, 0xa3355fce, 0xf56ddcbd, 0x9e5abcf1, 0x072c9827, 0xa059e012,
-	0xaa3c7871, 0xc24cf04a, 0x39e19371, 0xa4493e1f, 0xf9c66ccf, 0xc97e3861,
-	0x59d858d6, 0x2f2fc031, 0x083583db, 0xacdf3f7f, 0x41a3fbe2, 0xa20eab70,
-	0xe46febaf, 0x2a509471, 0x4f1847d7, 0x67f181c9, 0x5faff189, 0xfaf0e9cb,
-	0xdd10b17f, 0x8451f802, 0x9f68b67f, 0x7944ddd5, 0xcc6bb354, 0x00ed1227,
-	0x13a9b719, 0x94f1cdef, 0xe605919b, 0x4bc634cc, 0xf1e26eea, 0x8b58eb9a,
-	0x7ebde119, 0x3a9fb18e, 0xcc13feb6, 0xc9bbab0b, 0xd3983cf8, 0x8b19671f,
-	0xc2a39671, 0xfc07d08f, 0xd3f4fc82, 0xdf0fc5cc, 0xf63bf40a, 0xe8156587,
-	0x6b32ba77, 0x504deec9, 0xf1b6f1ff, 0xd669ff54, 0x06f3bfb7, 0xa128efb6,
-	0xb9260d7a, 0xf9083ee1, 0xd54df511, 0xc114d78d, 0xa2ed47b8, 0x39f95bdf,
-	0xb04a6f02, 0xe7bc1663, 0xf28a389d, 0xbc846b21, 0xdbc85be9, 0xc9d0bdaf,
-	0xd66f5e53, 0x9358dfc9, 0x79f5efc2, 0x2bbffcad, 0x66b73f30, 0x3c57a894,
-	0x47eb1e3f, 0x1ee84f95, 0x8726de80, 0xce6ff886, 0x09da7ee5, 0x1c744aa5,
-	0x4326a5e0, 0xe7c4dff4, 0xd1e2b335, 0x9a8fe45c, 0x04cfde6a, 0xc5b5b4df,
-	0x2ce99ef8, 0x6d737bd5, 0x250f2869, 0x70e7b59f, 0xa9ed2cfd, 0x67fbe080,
-	0x8db6effc, 0x36037e80, 0x0c5387c5, 0xdf977e4c, 0xe7e0e55f, 0x22fe02cb,
-	0xd3bcfd0d, 0xb37f3cfd, 0x0722b6da, 0x0f5fe7f7, 0x5e712a5a, 0x51f95b2e,
-	0x27d26fb4, 0xf9449b4f, 0x466636be, 0xdf74073d, 0xf1787c41, 0x48690527,
-	0xdd230e6c, 0x259aba4b, 0x48c6bde9, 0xdbafc0d7, 0x5cbf3272, 0xdae81b5e,
-	0xc3d7403e, 0xd700b9d9, 0xa9ae098f, 0x3fd5fd46, 0x265f124e, 0xbc9c3b8f,
-	0x7944bfc0, 0x275f003a, 0x661e5ff1, 0x7f2315c5, 0xecfe4bb6, 0xa62c3842,
-	0x29b39d18, 0xe9e37c54, 0x7630ea60, 0x1f2f8486, 0x8315ae7d, 0x4d3fc2e1,
-	0xcffc7fda, 0x3cf2fb83, 0xf9df0ed1, 0x5c00c659, 0x242bfe30, 0x7871570f,
-	0x5c2d2bb6, 0x5c7b08be, 0xe59be7ee, 0xf38cbb7c, 0xe7e14aad, 0x77e8bdde,
-	0xf97bdf21, 0xcfb87ef8, 0x7ce41d63, 0xcf6f4242, 0x169c05b1, 0xee75db98,
-	0x1b9fa27a, 0xb469f858, 0x8339968f, 0x74f117ff, 0x843e14c4, 0xcc859cfb,
-	0xa057f14f, 0x1272778f, 0x6f090dec, 0x879a9e32, 0xf3c9a791, 0xc0cfc649,
-	0xbec8c5ba, 0xfad8e793, 0xf39e7be7, 0xc7897694, 0x6577f462, 0x8654ff08,
-	0x452147f0, 0xc99e7ea1, 0x2fb87c52, 0xc853ee98, 0x6cc998be, 0xd6679724,
-	0xe19e7d72, 0xd487f6e0, 0xc7f1c3fb, 0x92339715, 0x991b3357, 0xe7c73738,
-	0xd9874c95, 0x2c0ee7ac, 0xadf4da67, 0xd1ef900b, 0xe007d14e, 0x7ee0e99f,
-	0x215cecec, 0x24cf583f, 0xf5fdf3d4, 0x67be7a41, 0xe49fca12, 0x9e66c9fb,
-	0x8cd2fee3, 0x99ca8c73, 0xa12777be, 0xeda8cf9e, 0xcc728499, 0x737bf2e9,
-	0x1fdc0d27, 0xd1c78c98, 0x871926b9, 0x4cfa2f3b, 0x3f191fe6, 0xc706736b,
-	0xcfd238e2, 0x55894671, 0x1e154be1, 0x583fe897, 0x76ec7484, 0xff434d15,
-	0xe81b1cc5, 0xcbba1823, 0x1730bc15, 0x008fede9, 0xf10e6e0f, 0x75e3c055,
-	0x347bc135, 0xe1e12c3e, 0x2b878136, 0xfb3d5e85, 0x89f14ab0, 0x43e97f1a,
-	0xbd084218, 0xe2116662, 0x45e93f57, 0x59d8bf79, 0xf8a2a030, 0xb24e63fe,
-	0x5abf1633, 0xb195f14f, 0x4f4c4c5b, 0x22e393d0, 0x327b8629, 0x30cbec26,
-	0xcce82fd4, 0x617fbc35, 0x7b4328d7, 0xa1bc7479, 0x2a57a2fd, 0xb149f50c,
-	0x2ff78629, 0x50daab7e, 0x1ae7a4bf, 0x3f53fbc3, 0x83a86d98, 0xde70d0c6,
-	0xd8559f7b, 0x65f79836, 0xbe196ff1, 0x19b6cdff, 0xf3bc60af, 0xb2f7d8a4,
-	0x0a563fb0, 0xe9205878, 0x637cdcf6, 0xaa25517f, 0xf3df2154, 0x79eb05bf,
-	0xc034f6be, 0x0bbf625c, 0xc4f68ddb, 0x7ac62de2, 0x55a6f743, 0xe7071b28,
-	0xe354b479, 0x79c93955, 0x79ae351e, 0x50cfa426, 0xe317d82e, 0x62ec1110,
-	0x8e1b33cc, 0xfd6cbfcf, 0x2fe8d84b, 0xfefe7f5b, 0xf5d90b16, 0xaa7d5f8b,
-	0xac8f0a2a, 0xdbfae35e, 0xa7fae375, 0xdfd71a96, 0x7fae33e9, 0xfae364fa,
-	0xf5c6fdbb, 0x5c6b511f, 0x7180ccff, 0x8cebb3fd, 0x34139feb, 0x06c8ffae,
-	0xb7e7fae3, 0x70bbd718, 0x8b3d7199, 0xed0d4bc2, 0xe52febc9, 0xdb9af165,
-	0x7a01ef8c, 0x2074094d, 0xa04168e9, 0xc677f281, 0x30cf7fb4, 0xc03d324e,
-	0xf744d1be, 0x6e3ec1bf, 0xf4fe729b, 0xfc8ad201, 0xf1f4c9bd, 0xeec2b96f,
-	0xfa017414, 0x0ae513a8, 0x614f17d8, 0xd8563759, 0xeda181fb, 0x12bf290b,
-	0xbee279f5, 0x36b93878, 0x7d894f48, 0x0a7ab0f2, 0x81f6c9f7, 0xf470f27d,
-	0x8fb31c7b, 0x4f5a8ec8, 0x5d1ba57e, 0xf14f8e1c, 0xcfe825d1, 0xf2f4827d,
-	0x32700071, 0xe71c7bc0, 0x4f1fe303, 0x8dfe4099, 0xd928b36f, 0x1982ffed,
-	0xcdd83096, 0xe2ada898, 0x953a4f3d, 0x2f6f42f5, 0x858ffe14, 0xb95be0f6,
-	0x9851efdc, 0xc5e6e385, 0x7b14bce8, 0xdd79c46d, 0xe3027123, 0x4f782008,
-	0xca011c61, 0x9ba73b5e, 0xf8ae52d3, 0xc049ee99, 0x4ae9fce7, 0x6ab5d929,
-	0xcd3de50a, 0xfd2141bf, 0x787fff34, 0x2cfa1719, 0x4cb95cb9, 0xd85db3e2,
-	0x482edc03, 0x149ac3c7, 0x07416277, 0xc2e7cde1, 0xb8fe8675, 0xfc47ff1f,
-	0x0ae3cd7c, 0xd06726d3, 0x675a3331, 0x0f3c6f5c, 0x9c38daa5, 0x0d999b8f,
-	0x058139f1, 0x57bc0ec9, 0xfbc6d103, 0x7bfbcf1b, 0xd3fa1463, 0x7cfff554,
-	0xcfe306ad, 0x9ffa2e38, 0xfe863e1d, 0x63ebd566, 0xf41abfe8, 0xba14c0fc,
-	0xcebfa324, 0x87f87bf8, 0xc27e9178, 0xbb2f413c, 0xbdfb8c9d, 0x2386fc92,
-	0x98c09055, 0xe7e663bf, 0x16dabdc3, 0xe63c9fbe, 0x984d635b, 0x37666337,
-	0x32fbe79e, 0x6df3087b, 0xc7e4274f, 0x790cbac3, 0x3cb4e98f, 0xb657efae,
-	0x71865c36, 0x07115ea2, 0x7835a7bb, 0xaab7ae19, 0x0e2f28f9, 0x277257ef,
-	0x40f16f7c, 0x6a9f027b, 0xdd43068e, 0x5e1008ec, 0x10b6b556, 0x3dc598dd,
-	0x6ef3ab50, 0xfc130573, 0x148e1712, 0xcc2d86f6, 0x984c595c, 0xc1f7f0c6,
-	0x55f38674, 0xc4e9da5d, 0x0bd5a87d, 0x2bca25fd, 0xfa2590ad, 0xb6b4d7ad,
-	0x94abdc10, 0xb33b1060, 0x3b51668e, 0xe1aadbe0, 0xbe785459, 0x67922af5,
-	0x3e6de716, 0x3867f7bc, 0xdabd59fc, 0xc87289e7, 0x8728d23f, 0x5db56fee,
-	0xd95af88e, 0x93c68cba, 0x756f6b78, 0x8df58e5d, 0xbed15ead, 0xb54dda82,
-	0x71f482ba, 0x8621681a, 0xc7ad1671, 0xb03d7189, 0x03c61933, 0x045b5ecd,
-	0xe1eac899, 0x05a3b2f0, 0x5d731f44, 0x8df4061c, 0xbc7d03e5, 0xfb4cccb3,
-	0x1df3dbd3, 0xafedfef4, 0x0fd1798f, 0x1e01607c, 0xf98aff51, 0xf0238ff4,
-	0x88721167, 0xf200c169, 0x23572595, 0x6b86747f, 0xdfe3ad36, 0xbbc49fda,
-	0x1f28cec5, 0x20ef92d4, 0xe17cebbb, 0xf7148d0c, 0x27bc0950, 0x44f00fe3,
-	0x8176f472, 0xe2efdba7, 0xefdbbe7e, 0xcec79460, 0xd55fc196, 0x148d5d00,
-	0x059b25f2, 0x056f6ca8, 0xeb8252c1, 0x0b416365, 0x49d675e8, 0xbfd1db2f,
-	0xcd7eed83, 0x4deaa18d, 0x58599e35, 0xaa7c9c6e, 0xbef1d91d, 0x618b3f4b,
-	0xc474be89, 0x4581ab97, 0xc51fccf0, 0x1d783d8e, 0x89a7af35, 0x5e3ab4f6,
-	0xe9ed174f, 0xf7cf5e01, 0x20d4a93f, 0x97f14960, 0xd5c6477c, 0x2dbe51a3,
-	0xb27cfc60, 0x3b60e7b8, 0x91c2f213, 0xdb06ab31, 0xbe74626f, 0x50ffb640,
-	0x4e38e7b4, 0x394629ac, 0xfdf8c73c, 0x6c878156, 0xe9f689c7, 0xb6319f14,
-	0xa64af8cb, 0xf42bece3, 0xfdb1997d, 0xd3bdf141, 0x1d363671, 0xc71b47db,
-	0x53da20df, 0x08ef3c1d, 0x473f21c4, 0x15efda2f, 0xc76c76ed, 0xed8d4bf1,
-	0x2bf8c56b, 0x43ad0095, 0xf8899f3f, 0x9d568ee4, 0xf67cc9ea, 0x7e0cc8ea,
-	0x99f0598e, 0xf21b196b, 0x23abfcdc, 0x9a4cbe79, 0x0ff7e3de, 0x7b650f21,
-	0xb8a34b86, 0x10b5eaaf, 0x421d591d, 0xec3e088e, 0x8b4a2397, 0xf717138f,
-	0x3d197f97, 0x8e7ee103, 0xfe00acf2, 0xbef39e90, 0x04c16263, 0x98db9679,
-	0xef0982c2, 0x1864177b, 0xe53759ea, 0xccf7de1a, 0x77686519, 0xb4378e54,
-	0xf13e58b3, 0xae826dc7, 0x0c2aca52, 0x02bef2ed, 0x923e73a6, 0xf479b576,
-	0x677bc314, 0xa474f54b, 0xcb57d3ed, 0x367cabfb, 0x39b70b94, 0x1f236547,
-	0x3275a4fe, 0xef20df1a, 0x8974a26c, 0xc9474bd2, 0xa2eab656, 0xc7f54a5e,
-	0x7aaf3cdc, 0xd78fab65, 0x6f9d188b, 0x4b5ad95e, 0x2f81c7f5, 0x56d7fcb1,
-	0xa07b953f, 0xfb0e160e, 0x43aff411, 0x7fa13b3f, 0xfd023fac, 0xfa1db963,
-	0xd087f2c7, 0x856fb63f, 0x10feb17e, 0x83e585c0, 0x7f3e0fd0, 0xfac7fa00,
-	0xd500d6a6, 0xa3ad6bef, 0x20d686fa, 0x36b6f795, 0xadb5f3d0, 0xdd5f542d,
-	0x7bca8cba, 0xae54c35a, 0xed435d6c, 0x1f37a116, 0x1f1fe713, 0x7dcfc69b,
-	0x467faf27, 0xeed5f29e, 0x4504a8bb, 0x93c8655e, 0x7dc3c8c8, 0x2f31a775,
-	0x7047f110, 0x931e39d8, 0xe02b18e1, 0x2b62cf18, 0xa0dcb952, 0x2e98eb38,
-	0xc0a9dddf, 0xf85b23a7, 0xc57517ba, 0x81a73da9, 0xcc56378f, 0x2cc27993,
-	0xef1f8aaf, 0x957af7c5, 0x8f2a7558, 0x831f9337, 0x553f0179, 0x9133dce2,
-	0x7084c479, 0x7f419369, 0x1fb3cc27, 0x270e6e5f, 0x78286de2, 0x7c78f22b,
-	0xe4ecad43, 0xb6d49bf7, 0x52cd9147, 0xbf742dfc, 0x102ead89, 0x04f4a0d5,
-	0xc24f7482, 0x603373f8, 0xed720593, 0x874ce5dc, 0xb8d1af32, 0x505dcaff,
-	0xa8e7d861, 0xfd3236e7, 0xccb7e822, 0x194a4fb8, 0x3be19b7d, 0x0cf7de5b,
-	0xddcf16ed, 0xb7f9f686, 0x22f2ad14, 0x8a32473e, 0xafd7593b, 0xd7003960,
-	0x044d8ec2, 0xbde05057, 0xfdf9d157, 0xefc5fbed, 0xfffb0844, 0x2f812ec7,
-	0xd7da7adb, 0x6af3758e, 0x84d87a49, 0xa7e3e7fa, 0xee8e49d2, 0xfe44c47d,
-	0x622c71ed, 0x01337942, 0xbf6c48cc, 0x56726f00, 0x151ccae9, 0x574ce5eb,
-	0x8b117eb1, 0xec08bed3, 0x17a43aff, 0xb11fffb0, 0x7e4cfd43, 0xbf3cc7f0,
-	0xba7a4a2b, 0x8967ac44, 0xd16d07dc, 0x73c3fd92, 0x635fc8f3, 0x26d6073c,
-	0xdc2b01f6, 0xef18d955, 0xff261ded, 0xd6fde9ce, 0x1eb005d4, 0x2a3a9cce,
-	0xba0df3e5, 0xd173c869, 0xbf2abecb, 0x623d016c, 0x086597e4, 0x9fca99ff,
-	0xaabba167, 0xf89c7479, 0xe52ccda6, 0x728e9e98, 0x4beea06c, 0x3ba2bb27,
-	0x89a3f087, 0x1adbd9f5, 0x3900fca4, 0xd377ed4f, 0x560f985c, 0xf74ff222,
-	0xb53adeb5, 0x661f2126, 0x52dfa0b7, 0x3d45ab16, 0xf2665a5a, 0xaf27a845,
-	0x1f617fc1, 0x73c7eedd, 0xf3055afa, 0xc71e18a1, 0xbabce9da, 0x794a85f6,
-	0x4b91da40, 0xb0760e98, 0xe16511c3, 0x997e81b2, 0x477c83f0, 0x5ccff5c8,
-	0xad0f3435, 0x3e47da40, 0x33ecddd4, 0x74863f87, 0x998759f7, 0x6309e5b3,
-	0x9183a97b, 0x6a545b9e, 0xa60ae889, 0x3dd3b423, 0x850eda8b, 0x1c2115e5,
-	0x50f3bdd3, 0x254c1f8f, 0x52dd4dba, 0x7bc35745, 0x79f5c14c, 0x1e99c700,
-	0x1a49a0fd, 0xd35ef057, 0xb42ecb04, 0x5e22c71b, 0xa5d19c70, 0x6285c784,
-	0x575afbbe, 0x159e9e10, 0xefcb68f3, 0x87873bc7, 0xcf78fcf9, 0xe90ea2e9,
-	0x73ce31bf, 0x37f56543, 0x95c6def0, 0x74d85531, 0x33ae7c46, 0x53ce26c7,
-	0x3802e006, 0x5538459f, 0xbffc9b84, 0x8f4d7e7c, 0xc819bf70, 0xbb8a5ab1,
-	0xc4b1324e, 0xa32cabb8, 0xc8cdfe42, 0x4ebc1173, 0x0ba9dcef, 0xdfac4a2e,
-	0xb8fd7444, 0x761fe7c2, 0xcd2f3c6a, 0xfd13d7ef, 0x7ee4ebc4, 0x487f9c59,
-	0xdff6f011, 0xe79e36e3, 0x6c583a61, 0x0d2de60b, 0x25fe1fb7, 0xc4a4ca2e,
-	0x18e830fd, 0x649d5718, 0x759f3ca3, 0x7f4b8f32, 0x337cc743, 0x8afcf12c,
-	0x6ae9d04d, 0xe4af31a7, 0x77b71e5c, 0xe8f589ce, 0xc6be71b3, 0x567964b8,
-	0xdd17bdc2, 0x91ffe4f5, 0x6ebecc71, 0xfd2e0f9e, 0x09044b6b, 0x78e51df4,
-	0xa5587be8, 0xee92e5f8, 0xa17df96b, 0x7ba01e87, 0x1d2fa156, 0xbc5ea1e9,
-	0xe8c6bf5f, 0x3bb059ef, 0x1f452ab0, 0xc45a57ec, 0x48d7e4c2, 0xfb2527f6,
-	0x279b7e91, 0x563e69f6, 0x93ca718e, 0xa58f8beb, 0x88a67ee0, 0x91dbb9d1,
-	0x8f7493ea, 0xedfb5831, 0x2b294f78, 0x24f4f7e3, 0x0525fbaf, 0x3ef3c216,
-	0x1c63aeb9, 0x37d867e4, 0xbefff389, 0x7d7ecf17, 0x96f3f40c, 0x81ce18ae,
-	0x099ba5bc, 0xae81e38f, 0xac64ecb1, 0xa0fba876, 0x5f4df3b2, 0xa5c0bced,
-	0x68d7dfc6, 0x9639eaea, 0xcbbc93aa, 0xfa7807ca, 0xad3efd8e, 0x4e27f88c,
-	0x575107bf, 0xb841e1c4, 0x7ecbfcf1, 0x137327d3, 0xbe7c60e9, 0x7c83edc6,
-	0xbf9357d3, 0xceb84635, 0x7599bd94, 0x1c6b870d, 0x3d1bd5c2, 0xb7689591,
-	0x0ff6b848, 0xa5fabf73, 0x934f155f, 0x0120fa8d, 0x12ff534f, 0x865bf69e,
-	0xc0966786, 0xf28e4fcf, 0xb70642fb, 0xd5fd457f, 0xccf78461, 0x51ebb163,
-	0xb3bc023c, 0x53de7f08, 0x15331459, 0x14acebf8, 0xe42959f4, 0xa8ce8f8e,
-	0x17dbd0b0, 0xa75e7e53, 0x7743dbc6, 0x79e08a2e, 0x0b8bdf02, 0xe0dfd10a,
-	0x7ba56e3c, 0x7949429e, 0x2f5cb222, 0x573fb1e6, 0xab0f1219, 0x78bcb9f3,
-	0xd4f9b5f1, 0x596fbddf, 0xed83ca19, 0x5ef5df22, 0xef0da757, 0xc47895ef,
-	0x2194057a, 0x2a117c4b, 0x3f2b7bba, 0x218ee9b3, 0xf1f133c6, 0x1be24bee,
-	0x572c9e39, 0xbb7297e4, 0xe2aa3954, 0x2efb8739, 0xd9ee937d, 0x2352afba,
-	0xe337fb99, 0xfe127d7f, 0x7d666fa3, 0x8acbd39d, 0x2aa3f47c, 0x037da5ef,
-	0xfe2521ea, 0x9fc432b3, 0x0ff34825, 0x3b656dbd, 0x6a78c195, 0xe72bf414,
-	0xe12fe727, 0x80b65e76, 0x7ae099ce, 0xc5abe020, 0xa44f52fb, 0xf387bd0b,
-	0xa9713d22, 0x4c89cfc6, 0xef5d68d2, 0xce853c9b, 0xf917ecf5, 0x2c4bf114,
-	0xc32efe43, 0xf76f0233, 0x0c45fb9e, 0x770da9ef, 0x055ee99b, 0xbf78f5a6,
-	0x7a147409, 0x9a7ba35d, 0xf16a9e81, 0x5f17a8de, 0xfb869b3b, 0x66f903e8,
-	0x3e40fb82, 0xe77d8797, 0x6f3a5ad4, 0x2e67daf3, 0x9ffe8135, 0x5d8557ce,
-	0x39e18b12, 0xfc158d9a, 0xd84380dc, 0x4ed78e01, 0x8efc2035, 0x2ab3dfc9,
-	0x4f767a09, 0xdbbe95be, 0xf9678968, 0x48740e30, 0xdfee5165, 0xfaeffba1,
-	0x38ba0bcf, 0x8f2b9a1e, 0xe8e09d92, 0x3de2f7e6, 0x5c13af9d, 0x7841f708,
-	0x33ee329e, 0x57b63d57, 0x06a378c2, 0xf8ba77be, 0xe24ca67a, 0x77dcd0f7,
-	0x785dcfe9, 0xc2ba5eef, 0x4be8fee8, 0x3906cc0a, 0xd7c45f5e, 0x1632b3a1,
-	0xe5fc851b, 0xb6af28d2, 0x0d9b7a33, 0x17c97aed, 0xf4a947a3, 0x97916add,
-	0x29727abe, 0xe3a499f1, 0x57c105b9, 0x02366e91, 0x76493c5f, 0x9d302c4e,
-	0xc72ae3f0, 0x95c7e3fc, 0x3fb71d58, 0x2fd42e2c, 0x819326a5, 0x380b8adf,
-	0xec12c8dd, 0xee77b252, 0xf52cb410, 0xc6c45b7d, 0xb7ffbf30, 0xa3a566e7,
-	0x2796da5d, 0x0dbf3ced, 0x095db5f1, 0x38e117a4, 0xbed2a5ff, 0x4ed7c5ef,
-	0x6db8e034, 0xdbe42f30, 0x58ea7e7b, 0x9b49f68f, 0x2a7c4fcb, 0x26dcd7c7,
-	0x9fbc1eb1, 0x2bff16fd, 0xbb8c6fe8, 0x47447df9, 0x43635ca6, 0x4cf787fa,
-	0xad7bcfd8, 0xd81a0bf8, 0x07f90d4f, 0xcf66ba16, 0xb116efc0, 0x6bb42ae0,
-	0x86a87517, 0x11ee177b, 0xb9e162f2, 0xd84d1614, 0xfc9c2c1f, 0xb6373a2d,
-	0x8b1a5cf0, 0x8f75bd82, 0x8f7d1738, 0x0ac45738, 0x443b3d38, 0xdfe515e9,
-	0x24bef7cc, 0xcbf995bd, 0xdf39f3bd, 0xb7e802b3, 0x14b1e949, 0xa71b10c1,
-	0xebce9efc, 0x62ead7bc, 0x780492d1, 0x0473cd07, 0xd38c268b, 0x1b39deff,
-	0x7d6067cd, 0xcc0efd39, 0x787841d7, 0x784bd5af, 0x91ffbe1c, 0xf40e3c06,
-	0xc780ca3f, 0xd097fdc1, 0x96b5eff8, 0x13ff497e, 0x375fe986, 0xefd03fc0,
-	0xf7b71a68, 0xa71ffcc8, 0x891ddf02, 0xf9edbdde, 0x331dfc4a, 0x017efd2b,
-	0xa6aceaeb, 0x338f8473, 0xe77a673a, 0x83bddfe1, 0xee779af9, 0x8c70f8b2,
-	0xae7c733e, 0x333d086f, 0x78c2b99a, 0xc72c979f, 0x7cd31417, 0xb4db9f92,
-	0x32f30b88, 0x0b9aa56d, 0xc6d11f7f, 0x71bb9162, 0x236952df, 0x42e32739,
-	0xe53fdfb2, 0x3b3cf2a9, 0x6f7907c9, 0x979112cb, 0x5e08ec57, 0xd4beeb81,
-	0x13fcded4, 0xd283f6f8, 0xcc373a36, 0x33f69b98, 0xe1a36e32, 0xa315bf2f,
-	0xf0c0305f, 0x7a13cdfc, 0xf77e0670, 0x18271043, 0xd82f51c7, 0xb5bcc41d,
-	0xb8df620d, 0xfaf31ec1, 0x0de6e412, 0xb357da05, 0xe893da17, 0xf72fd276,
-	0xdedd3946, 0x227e8050, 0xfcc4f635, 0xedb7cc22, 0xe976f711, 0x55778a16,
-	0xfefba31e, 0xff7dcbe6, 0x8ebce49a, 0xd1da377c, 0x8694ce32, 0x6b687779,
-	0xbef7e46c, 0x7af2a7d5, 0xa08c7ffd, 0xffb01073, 0xf9432d49, 0xfee55fb2,
-	0x3adf1120, 0x67d0e62b, 0xf94058db, 0xe41f22f7, 0x744bf76c, 0x35d9e4af,
-	0xebfd6863, 0xdd3ef85f, 0x973fb70b, 0x43beb1eb, 0xf563d24e, 0xde155f56,
-	0x973fb85b, 0x5a9dabdb, 0xc122ad34, 0x579d5d7e, 0xe3f9f24d, 0x894c6335,
-	0x0aef8ff1, 0xfa51b079, 0x1578b537, 0xb8f9679e, 0xd233fa32, 0xf4ec07a3,
-	0x83a6513b, 0xfba2abbf, 0xe95a372d, 0x0faa0177, 0x875cdb8e, 0x8d34c3fb,
-	0x074d91f2, 0x99cf04ed, 0x2d7efc75, 0x5de516fc, 0xf491c1d3, 0xa9f556fb,
-	0x6c27ca71, 0x6095f14a, 0xe0feafdc, 0xffd7ba54, 0x057186e4, 0x644eff28,
-	0xaf7405ea, 0xf43c06f1, 0x6343f509, 0x17b5f3f9, 0xe75579d3, 0x50e0d4c6,
-	0x8fa9107e, 0xdaefef92, 0xdbde5b9f, 0x6719f885, 0x7dfca1f3, 0xb8f1f14f,
-	0xd9f12bef, 0xf915c53a, 0xd77ad2f9, 0xbc7dfa69, 0x6f778efa, 0x43dcf462,
-	0x73f72b74, 0x0bd5e3c9, 0x12dfb57d, 0x4bbf8b9f, 0xe052bf56, 0x624efc5d,
-	0x7e9ca9bd, 0x7de24faf, 0xb73dd263, 0x24fd084f, 0x69af93cb, 0xd8205f74,
-	0x1fe80511, 0x4ad8793a, 0xe3727674, 0x2eaf3a04, 0x9c07abc7, 0x4f2f80b8,
-	0x7113e864, 0xf2169f5d, 0xdf257eaa, 0x30e7caa7, 0xe77f0c7e, 0xa5487e30,
-	0x573eaebc, 0x92e30d3c, 0xef593df2, 0x4ab74f9f, 0x3fb597bf, 0x6f5a45f7,
-	0xf48627a0, 0x49c17a64, 0x82f43a7a, 0xe7ae1775, 0x8c2c95c7, 0x5bf0cffe,
-	0x8ec7f7fc, 0xfd92b21c, 0xef9c77dc, 0x9fdd076f, 0xe01788e6, 0x17a1a1fd,
-	0xeb1c9246, 0xe0ef8fcb, 0xdf9db6f6, 0xf046f8ab, 0xcdff1162, 0xe611f711,
-	0xf9f79da0, 0xed147b21, 0x9e29283c, 0xbdbb6610, 0x2a70fcf4, 0x940fff43,
-	0xca63cf14, 0xeefd2f01, 0xdf176b0c, 0x3bfbe8c7, 0x5163820b, 0x0c59df2e,
-	0xfbf03bfd, 0xe7def453, 0x521782a3, 0x5cb18a0c, 0xf52e5e31, 0xa42c1f9b,
-	0x5e67cae7, 0xed2a7bfe, 0xed463da2, 0x62f06b21, 0x9cafc79a, 0xf310e76c,
-	0xeef7aafc, 0x41182d1d, 0x06e128eb, 0x98dd933c, 0x05b3978c, 0x3b7bf126,
-	0x74c91f1c, 0x5f9ebfd9, 0x5ffa1f02, 0x21f6bce8, 0xc6eb8ebe, 0x591cb859,
-	0x63ec813b, 0xc86296d6, 0x88715b9f, 0xbbd0c3df, 0xdceb49c1, 0x843ff667,
-	0x86fe28fa, 0xed7bf199, 0x3f4022c0, 0xf9a1e4c5, 0x4f9123e5, 0xcf2d64bf,
-	0xd1e8fbb3, 0x39e60bf7, 0xfbf25cf0, 0xd2c97386, 0xa49d085f, 0xe1c63fa1,
-	0x97e6d3d3, 0x255d7b71, 0x7aeff8f8, 0xf4eb346d, 0x0de16bbb, 0x711fc8e3,
-	0xa41fa2d2, 0x775b87df, 0x4ae90981, 0x77f2172d, 0xbc9f9f13, 0x7bde4b2f,
-	0x8a9f8c95, 0x7f9262c2, 0x33782c4d, 0x827ea1de, 0x61c259e9, 0x91fff746,
-	0x6984df7b, 0xe29f9a88, 0xf485acb6, 0xf67be0c2, 0xbbf25f2c, 0xf5bbff6c,
-	0xf42b5c2a, 0xd38795ef, 0xe07eaf50, 0x3a46fbe2, 0x5d7a8f7d, 0xc36cf3e5,
-	0x83af300f, 0x4e14a605, 0x879276a2, 0x5dbc281f, 0xf341b9ca, 0x7ec17a47,
-	0xebe83df0, 0x7fee429a, 0x710cae63, 0xc16c2bc8, 0x9fa94d3c, 0xc2668a42,
-	0xdca7f373, 0xe3d21a7a, 0x19c5b5a9, 0xc60f302b, 0xda2567ad, 0x8ca3a1d5,
-	0x78eb8bce, 0xf8c5f8df, 0x89fe32fb, 0x9fdbf7e8, 0x243bf461, 0xb4e4f3c3,
-	0xed89b99e, 0x9eb90a73, 0xf6285f9b, 0xe44c8599, 0x8de32657, 0xb162fbaf,
-	0xf0796aee, 0x2687da72, 0x4b78b7bd, 0xa487a0ba, 0x7fcfede7, 0x1ea0f297,
-	0x4913de36, 0xef185fb1, 0x612c5783, 0x532c42e5, 0x61bdaf28, 0x0d739713,
-	0xb92cceaf, 0x5ee9d78b, 0xef3b6985, 0x59e3dfa1, 0x12caebb0, 0xad16e5c6,
-	0x05c7a483, 0xb412fe05, 0x555be2e3, 0xc345f217, 0x51e09516, 0x56d73ecd,
-	0x8b7a7e78, 0x06bbec99, 0xbce9cf01, 0x9bad1a60, 0xe00b34c6, 0x4c16b4fd,
-	0xab75fb23, 0xa4a1ddf8, 0x6f7bc079, 0xe043156a, 0x99d7c6c7, 0x043c53f0,
-	0xa261bc1d, 0xbf805a75, 0xec70890b, 0x79bfc854, 0x33783f3a, 0xfec14fd6,
-	0xabe9cf1f, 0x7dd0969b, 0x3ef8c936, 0x7d120b6d, 0x91f3162e, 0x471e4cf8,
-	0xf10fb3e2, 0x2bd2f689, 0x85ef4853, 0x6291541e, 0x9fdd8bd9, 0xda7cbed2,
-	0x99df2ba1, 0x8137cf8a, 0x9ea3a2dd, 0x6fb3f51d, 0xa35b9ea3, 0xfe7a8c52,
-	0x962ce2a1, 0xff71afa4, 0x39f5ff39, 0x3d04a669, 0xf1c83ea9, 0xa4e73aa4,
-	0xcff7a42d, 0xebe91d7e, 0xaacbee84, 0xf1ef7848, 0x83b8fec2, 0x37eabd61,
-	0xc70d21fd, 0xa66f5869, 0xe975c979, 0x7ca079c3, 0x208d4f6b, 0xc5e5f7fd,
-	0x4eb95fa9, 0xeb8df4fd, 0xde09e920, 0x9742affb, 0xf24c2718, 0xb05154e8,
-	0x9d0437ca, 0xc6007a2c, 0x38b6fec5, 0xf3d2fee9, 0xa3e2571d, 0x5f05bd7f,
-	0x71d71d53, 0xd1f91147, 0x74686f4d, 0xfb44e0c8, 0xc7c80555, 0xd02fa0f5,
-	0xc4af516f, 0x647ba1df, 0x1ee9590f, 0xb74dfae6, 0xd5e38cdc, 0xb09ab71f,
-	0xabe1d4fd, 0x495c1226, 0x2a780aeb, 0xfbde8a18, 0xbe05e28a, 0x3d81fc04,
-	0xe72dfc41, 0xc1370093, 0xba29fb01, 0x08afa88f, 0x0e4133d6, 0xedc859bc,
-	0x65df782e, 0xf7e6fa21, 0xd7cff561, 0x575f3495, 0x64df7cd2, 0x17ccdf44,
-	0x782cf9a4, 0xe7c26adb, 0xb6bfee0b, 0xa73df704, 0x79a74dd6, 0x4ff0ca9d,
-	0x553afe44, 0x210ffd00, 0x0fdc172f, 0x0bfb2cf3, 0xd3b76cf3, 0xcf3b0d7a,
-	0xf60ef88c, 0x89f9e617, 0xcf3943a0, 0x0d3d34f7, 0xcf43f9f3, 0x2efd0caa,
-	0xc6c0fca1, 0xbf4ebca9, 0x73321713, 0x4a6d087a, 0xdedf7ca5, 0x04fbfe6e,
-	0x78c00e52, 0x260f49e7, 0xd55387a2, 0xd0c9e6fa, 0x3f07ffdf, 0x00b71737,
-	0x0000b717, 0x00088b1f, 0x00000000, 0x7dcdff00, 0xd554780b, 0x733effb5,
-	0x64932666, 0x08124c92, 0x3c984081, 0x49849009, 0x768a8802, 0x02d10478,
-	0x89794f0d, 0x42100793, 0x69b5a05e, 0x0240cd6b, 0x350d45a2, 0x01d45a2a,
-	0x0da2a281, 0xbc150a0a, 0x45622a03, 0xb68b57c5, 0x514026e5, 0x5ea0c679,
-	0xffd7b5ae, 0x4e7dadfa, 0x5490ce72, 0x7dfbdedb, 0xdf1f7cff, 0x5afd9f66,
-	0xd7b5ed7b, 0xe7bdaf5e, 0xcbaa3dc2, 0xe4e216ef, 0xff6f05dd, 0xf7a517bc,
-	0xfc812eaa, 0x02cddf58, 0x2cc38ff9, 0x934a14fe, 0xfe70a68b, 0xa56b9b65,
-	0xa689c422, 0xa141fdbf, 0x367d85fc, 0x0bf2a0b7, 0xcef74529, 0xea8f7e46,
-	0x2fed415a, 0x259f680c, 0xd8b97386, 0x5deae544, 0x2e509a23, 0xcae61e1e,
-	0x0df2f2a0, 0x09644261, 0x6856fbfe, 0x3be9237f, 0x6ba50b52, 0x34786f55,
-	0xfd2f4da5, 0x6fa5c944, 0x578f3756, 0xf724abf3, 0xb97e34dd, 0xf9ed5855,
-	0x399edca8, 0xf388472d, 0x03136d7b, 0x233f32d9, 0xb03fcb87, 0x5d8d7952,
-	0x7bf85af8, 0x0e6a7dad, 0xd2b6e28f, 0x0fa98b38, 0xfae94a91, 0xea60ef18,
-	0x938d317f, 0x8b7de342, 0x0e5c1fbf, 0xe7cb0edf, 0x9fa88a0b, 0xf6626d7b,
-	0xf55dd973, 0x4ddb34f4, 0x6d46f61d, 0x553b577b, 0x3cc62588, 0x2422a1e1,
-	0x477914bf, 0xa432be57, 0x7ca42abc, 0xa7cfbf47, 0x1f2f3914, 0x1fc6037f,
-	0x12c785d1, 0x2c3b8f0d, 0x72eb1df4, 0x44d8128f, 0xbab12dff, 0xfe09cbed,
-	0x9b88c6e7, 0x55a94fd1, 0x47cdae38, 0x5f9e0ebd, 0x86345589, 0x87bbe3e5,
-	0xa6f3e9eb, 0xe2c31afe, 0xced11f28, 0x89bd53e3, 0xda9e4376, 0xab9ae09b,
-	0x4ba7a3c1, 0x4ebb85b7, 0x7fa0f3ea, 0xa6b12d55, 0xbeeecd7c, 0x7c0693ae,
-	0xfa7fc52f, 0x3449bfd2, 0x8bc091fb, 0xdddaabfc, 0xe892307a, 0xcdf14da7,
-	0x17bf5375, 0x9d1d7e0e, 0x1f75e6ed, 0x9beb4459, 0x7f3ea6af, 0xbedbe698,
-	0x426cf547, 0xfdd86fbf, 0xe7fd0c4a, 0x6e0f8b9b, 0x2fd5efa7, 0xddbb89a7,
-	0xc50ff35d, 0x17dd85e3, 0xfbe953a3, 0x08f643f9, 0xb9e68c31, 0x9dac7e37,
-	0x5c4762e8, 0xaf78b77b, 0xef5dd6d5, 0x35b5bcef, 0xdea1aa7a, 0x3d1ad179,
-	0x252f40cd, 0x8bd62fbb, 0x5f9fc65c, 0xefc2efcd, 0xc7bd7d89, 0xf4bdf4aa,
-	0x5ac6fdf7, 0xc35fbd28, 0xf736bddb, 0x6e096b13, 0xcf309eff, 0xfcfb8216,
-	0x682db31b, 0x728dfe7f, 0xcbcdbd2d, 0x244f5fe9, 0x8b68fc63, 0xbc7d77a4,
-	0xf70b6e35, 0x7b696a53, 0x8fda1aec, 0x93ebbfa5, 0x55d290d2, 0xcfc96a5e,
-	0xb76f3ac4, 0xdc002fb5, 0x46b115e7, 0xe7eaeb89, 0xdb9bb77e, 0xc9f3df9f,
-	0x270fe063, 0x4f901dee, 0x41f94d64, 0x3f2a3eb9, 0xa64151ff, 0x7f3dfa8b,
-	0xf80f5f4f, 0xfb9b76c2, 0xbbb7a636, 0xf7d83ca2, 0xa7187f7a, 0xb9effd16,
-	0xe90fa462, 0xca5e1247, 0xb8e4fae7, 0xabbf257e, 0xfb8b68df, 0x17e0d1be,
-	0xb679b7bf, 0xeffcb250, 0x31627d69, 0x6ee7ec3f, 0x4d74a1d6, 0xf89b7098,
-	0xbb864ac9, 0x22ec7844, 0x030b964d, 0x228995bd, 0xc9b0befe, 0xf1117dfc,
-	0xbc5f7c09, 0x5cbdfcde, 0xa56ead34, 0x98092df9, 0x3fda0bbf, 0x6bec04fe,
-	0x5ec5affd, 0xff7a0514, 0x4f54cc36, 0x40fe35f8, 0x255f091f, 0xc7c11fb4,
-	0x8102519e, 0xbbdf5895, 0xe8679e54, 0xa775debc, 0x2287bb70, 0xab4167ff,
-	0x5b8f5d61, 0xf0913584, 0x1c2edc7a, 0x47e8f989, 0xf5fa8508, 0x6c0b0bef,
-	0x0f7726a1, 0x04b92afe, 0xc231af7c, 0x5bbe0822, 0x427ce05d, 0x49f7d8ac,
-	0x5d29fa32, 0x356de853, 0xe6c177c0, 0xd4e7e87d, 0xe25dfdbe, 0xf8ef54d7,
-	0x58d340d8, 0xddf8eb82, 0x1ba1a7aa, 0xb1af4eb8, 0xe1014088, 0x02212ee3,
-	0xf27f94f1, 0x5a62e493, 0x7cb6cf97, 0xa4625c92, 0x36cc457f, 0x129ea3d2,
-	0xef3ebc24, 0xfcd2ef61, 0x305cd38e, 0x5d7ad09f, 0x57866beb, 0x2ab867c7,
-	0x87a3bb6a, 0x54f740cf, 0x5577f59e, 0xf7efb178, 0xcfa002d9, 0x3c5f8dc8,
-	0xb9f40f38, 0xa14ae6d7, 0xa9f66bb1, 0x2de6955e, 0x0c81a8f6, 0x4f7b639c,
-	0x9ce05744, 0x52e053d9, 0xd9aef30d, 0x7ce116a3, 0x62fbbf39, 0xf7366942,
-	0x44edc533, 0xa03c07fb, 0xf8e09edf, 0xf7fd5b9b, 0xccd79ff8, 0x7f65ceff,
-	0xf8037090, 0x9953c6c0, 0x07c4efe0, 0x79a6e6ff, 0xc6fccf9e, 0xad10bc8e,
-	0x047f4123, 0xe09bb45f, 0x2af810bc, 0x8e5c105a, 0xd037aabd, 0xa5443acd,
-	0xff4f19d8, 0x09137c32, 0xf82e84be, 0x94a89e08, 0x56705d11, 0x38eddbbb,
-	0xa2382f67, 0x694fc173, 0x12f29342, 0x0dc9f3b4, 0x493a5afe, 0xbf1d7f10,
-	0x70cae167, 0x8a4d0bc8, 0x97be8c27, 0xdcf955ed, 0x191bdb2a, 0x3f1816c0,
-	0xd2f9c9c8, 0x1840d547, 0xa3a827e5, 0xea9b30ff, 0xf547be2f, 0xfb148ed0,
-	0x07f6de37, 0x8375d61b, 0x881ca04d, 0x344b5c03, 0xfdec96b8, 0x8d0a67e1,
-	0x2ddf78b3, 0xe2ce3007, 0x170f1407, 0xe8edf3a8, 0x8a43c977, 0x67405788,
-	0x3a46e3b6, 0xce64d85b, 0x0bad122f, 0xc1fc1554, 0x9ef09dfc, 0x96fd415c,
-	0xdd730eef, 0xa102f18d, 0x4abc42e5, 0xff68d4f0, 0x3b58cacf, 0xcfd500f7,
-	0x3c6768da, 0xe2170f9c, 0xb5abf608, 0x0d204135, 0x1d6326b6, 0x6bf9efcf,
-	0xe6b1d632, 0x2995ff77, 0xcebf59ba, 0xaa37b4fd, 0x2148a9d7, 0xc4514eae,
-	0xfba0a9b7, 0xba8a538b, 0x201b6fa9, 0x9b36c5f7, 0xca879fbf, 0x8afc6c0f,
-	0x3d85c1f9, 0x6eae81be, 0xbf6bb7e8, 0x892dc3fa, 0x02e18348, 0xd716f0e9,
-	0x2427d80d, 0x35be620f, 0xdb4f569b, 0x97f0f944, 0x44b9386c, 0xf793864d,
-	0x42c7f60b, 0x3efabf43, 0x80be06d9, 0x0fe48474, 0x1cf201b6, 0x7b9daa3d,
-	0x4c77f6db, 0x9e06e8c9, 0xd71b6ea3, 0x5c100db3, 0xd17759ef, 0x845bd05c,
-	0xbe0d1fc5, 0x775ebc2d, 0xa2b3c22f, 0x5d4357d1, 0x89ef82ad, 0xfed389a2,
-	0x47d385a2, 0x5139f085, 0xc05c785f, 0x620310b3, 0xf3de3f81, 0xccbecf8c,
-	0xadac7f37, 0xe8357821, 0x022b1fc4, 0xeaffe85b, 0x63508746, 0x46b5ed20,
-	0xce5451a3, 0x5206fbb4, 0xd503edb9, 0x1dde40a2, 0xc7a7afa0, 0xa5f7fd85,
-	0x718c4673, 0x2e1ff6fd, 0xaafe8899, 0x8c22a976, 0xd3b73bfa, 0xd44e8226,
-	0x7c02fda7, 0x9ec2fe1c, 0x57b4be02, 0x6b979011, 0x35ef8f28, 0x80deada3,
-	0xa4772f01, 0xd50f18d8, 0x9cf29929, 0x4d0f7ab6, 0xbbcf7ea2, 0xeb90ec4a,
-	0x26cb876d, 0x25b1bce2, 0xd701d896, 0x1d63c3fe, 0x58b75829, 0xd59bef2b,
-	0x8f71f57b, 0x547fd0b8, 0x6f0c07ec, 0x4445b663, 0xa3c6bb53, 0xa6460161,
-	0x30a1f243, 0xc18daf0d, 0x37770ef1, 0xe317e3eb, 0x2a28c493, 0x044ea9df,
-	0x255ce79c, 0x2da3ac2e, 0x0aeee896, 0x4ef36f6a, 0x0dfa9abc, 0x078b8d8b,
-	0xd2526b7c, 0x8abf3d78, 0xbf3865ad, 0xcfc2f122, 0x08b6b7fb, 0x65fec6f9,
-	0xe9bee32a, 0x35cfde21, 0xd47e390e, 0x51cf953e, 0xe343a571, 0x4abbefdb,
-	0xc9059c69, 0x0f4147be, 0xc46dfc9d, 0x39fc02ab, 0xf96162cb, 0xe735f1ac,
-	0xbd21f05a, 0xa48a6cfc, 0x563d7d37, 0xc0bab2f5, 0xe8d51e3f, 0xc8ab9573,
-	0xa7986f91, 0xc345b7ad, 0x78039157, 0x3a2f61da, 0x9da5f384, 0x3cdce3be,
-	0x01cd3890, 0x59ea853d, 0x7aa9cfd0, 0xf47631da, 0xfc01c33b, 0x3255ea2e,
-	0x8b16ed01, 0x6fd8d5da, 0x22abd78b, 0x8dabe068, 0xa2ee3936, 0x1822114b,
-	0x22ee35df, 0x7f6e3f5a, 0xe9045a29, 0x970c6ddc, 0xe4a31af5, 0x452379fe,
-	0xb50f9fee, 0xf969b4f9, 0x7baf997f, 0x5cfd7ccc, 0x96b61fec, 0x46fefe48,
-	0xa55bf50a, 0xa1484eb4, 0xec4eadf9, 0xa7bf03b0, 0x98225dea, 0xb2f78069,
-	0xa08bc679, 0x7acedc61, 0x9f3c1c97, 0x3370f5ae, 0x75f35dfc, 0xd54e1e32,
-	0x7b1e3227, 0x84c93fee, 0x53feaec7, 0xbcbc784d, 0xff1e4cff, 0x77d67d54,
-	0x87b43ff4, 0xf826ddfe, 0xe74dfabb, 0xdf6ec571, 0x3b97f040, 0x980fc45d,
-	0x505f886e, 0x3df15db9, 0xdbe4357e, 0xe404c28f, 0x7dc2afbe, 0xfe065c83,
-	0x65ce0df0, 0x4982e7d6, 0xd17eb7e0, 0xeecd69cc, 0xded0138b, 0xfb017c4d,
-	0x11af2f49, 0xf8270ced, 0x3583e885, 0x7cb9bab4, 0xf4106fb7, 0x4e8e1d22,
-	0xa775e679, 0x20fb42df, 0xa3dfdf6c, 0x582f8fb1, 0x2878a7db, 0x46abd96d,
-	0x7c75f71a, 0xb1a7a4aa, 0x6dc8be03, 0x68d5efa5, 0xb6ef7c47, 0x020e9797,
-	0xdac3aa7e, 0x81f70173, 0x8b96ff97, 0x7dabe473, 0xfbe2074b, 0xf2cfaa36,
-	0xdabdbd87, 0x5d2fe863, 0x5196fcb8, 0x5533a95d, 0xefd0ffee, 0xf435f6db,
-	0x89db1c03, 0x0b9209bd, 0x0a2aebab, 0x0d83c64e, 0xff07ef79, 0x58b7c412,
-	0x5d3dda1f, 0xeef9031d, 0x28799243, 0x948f7c3f, 0x100f861b, 0xe40a4b01,
-	0x83670fbe, 0xb08f544f, 0x470aa0bb, 0x79611de4, 0xc384623b, 0xbffd50a5,
-	0xdbe397f7, 0xa1a42f21, 0xe83c617d, 0xf164caf9, 0x1b6dc9ef, 0xf04ff642,
-	0x34edeabd, 0x3ada955e, 0xfbc29c65, 0x7c153f28, 0xde2fadfb, 0x04d7f4d6,
-	0x9c01cfac, 0xfbcf046b, 0xa9653f5a, 0xcf502bbe, 0xe7bd68e7, 0x7337aa0a,
-	0xe864df56, 0x7e9ac547, 0x52112626, 0x947e64ae, 0xe5c83b03, 0x83d4b6e7,
-	0x3e7c525e, 0xd7dfc1e0, 0x35f9c1e1, 0xfa384934, 0x62455e12, 0x8d1a7520,
-	0xa2d5213b, 0xc0140fdb, 0xe39b443d, 0x965afd33, 0x1939f2c7, 0xfd1d0388,
-	0x4b4ee3b3, 0xfc064ef5, 0x670ffd7a, 0x75f1cbcd, 0xf2e86e73, 0xb2deddbc,
-	0x57b6700c, 0xfc7f5939, 0xeed44500, 0x41615989, 0x8a7a1a35, 0xf9f40d73,
-	0x0e0b91a3, 0x8c7c26f6, 0x43cdf28f, 0xbc6fb3ff, 0xcaf2357e, 0x72f77881,
-	0xeb7173d0, 0xc2efd648, 0xbca3377d, 0x981be1d2, 0x373c5340, 0x062837c0,
-	0xbc517c87, 0x9451275c, 0xfc2dd453, 0x45629e12, 0xe518df8e, 0xc53f472b,
-	0x5d8f2396, 0x23d66f81, 0x8d106f6c, 0x739fb9bd, 0x9dde5176, 0xe1e3affc,
-	0xfd8f3698, 0x25ed7136, 0x75fedf9a, 0x82069e31, 0x1bceecb7, 0xba50d417,
-	0x109452d0, 0xdf704d54, 0x575d4a96, 0xf6078bfa, 0x9cee7925, 0x4ebb834d,
-	0xcaeadb83, 0x50e7ee34, 0x79741bb8, 0xeb0a17e5, 0xf947fc83, 0x81b1fd17,
-	0x661f29bb, 0x74c1f8b9, 0x16395b9c, 0x886c93b6, 0x7a45bda0, 0x9c1a3be4,
-	0x73bed28f, 0x35f7f1c4, 0x21189ef8, 0x683e27db, 0x507ec009, 0xaf0f7634,
-	0x4ed513d3, 0x15634a8f, 0x721db70b, 0xb2f0a950, 0x31d7fcfe, 0x4ad7db7f,
-	0xf54e6af3, 0xddbc07dd, 0xfe496f1c, 0x0df0e180, 0x6b790a9d, 0x3fc79cb4,
-	0x1e793790, 0xc6cb84d3, 0x6b589942, 0xcd31fc81, 0x50b2a725, 0xba63fb91,
-	0xde30daf0, 0x7ae3e14c, 0x7bb79def, 0x07bc4fa1, 0xbee0885d, 0xfbf9f851,
-	0x74e0111c, 0xfd72089e, 0xe72b449b, 0x7d137c75, 0xd24bdcdc, 0x547d27c7,
-	0xc056ffc6, 0xee646efd, 0xc79a3a80, 0x650687d4, 0xdcd57eb0, 0x5df3f19b,
-	0xe8d54f70, 0x6feff686, 0xbfd88eb1, 0x699fa833, 0xdfec8437, 0xf5f5bdf1,
-	0xfb47f8cc, 0xa74748e8, 0x4bece4fe, 0x5b4eb878, 0x4bbcebd2, 0xc2127f59,
-	0x8fd1f2c5, 0xa85b7db4, 0x5a2f453a, 0xd26e239f, 0x89960897, 0x62259663,
-	0x10afafbe, 0x3ad0156f, 0x15463ebe, 0xcbd35c0d, 0xfd68a6ed, 0xe13fe94d,
-	0x0f5bd833, 0xe1af608b, 0x92f0aed4, 0x8218d5ef, 0xbdba8a7b, 0x27ca9631,
-	0xc6bd27f6, 0xefaeefc0, 0xfd0ac3b5, 0xf37486ee, 0x66d949f7, 0x68b267fd,
-	0x94fe3152, 0xfb7ae6e1, 0xb3a22781, 0xfea553f7, 0x21888622, 0x0b7af2df,
-	0x1d3e718b, 0x2fda2e93, 0x69111c10, 0x2eb18fbe, 0x75ff27cb, 0x5615c601,
-	0xb7ea9f39, 0x1debb655, 0x288b7927, 0xa7ac9c50, 0xca532293, 0x4a7fc825,
-	0xd3d203f2, 0xcf4e6ef5, 0xf28f79d2, 0xce1ef5f3, 0x9d15a417, 0x6b25bf40,
-	0x7d62b73e, 0xf8970cee, 0x9a696f2e, 0x762ab000, 0x5a441cb7, 0x809a2c16,
-	0xa1d17663, 0xef4883da, 0x6adbd4ec, 0xe1d3be59, 0xd3a345be, 0xfda6a25b,
-	0xe1d68730, 0x87aa3d96, 0x4da603f3, 0x790bdc9f, 0xa27be71b, 0x444baaa3,
-	0x54572433, 0x012fdeab, 0xdb6f7797, 0xdf9a78c1, 0x18a3f527, 0xbdeacfee,
-	0xfa99f70c, 0x4a4e9c89, 0xe81bfa2b, 0x673e2bcc, 0xf6f26c79, 0xd5126b36,
-	0x5e2af42f, 0xbd6bdbec, 0xfda01022, 0xcf26deb7, 0x0e74f581, 0xc98f1f60,
-	0xade8f699, 0x67da7c02, 0x6671a34b, 0x10a4b0de, 0x55194ce3, 0x1bbd456c,
-	0x201921bf, 0xbf4e8ba5, 0xf9f5ee8b, 0x76eb6957, 0xf18565ee, 0x2d33b1d8,
-	0xf2c17206, 0x907d695d, 0xf5d4bf12, 0xade048dd, 0xe18592e3, 0xc11a38ec,
-	0x6ede86fa, 0xe648aef9, 0xd807cb3b, 0xb760c203, 0x2ceb433c, 0x99e6f20c,
-	0x36e27e67, 0xe2672b9e, 0x18fabe5a, 0x922fedfc, 0x736491bf, 0xbff011ea,
-	0xa03cfdfe, 0x9c9af393, 0x24467a4d, 0xcd6abfce, 0x84fe08ae, 0x690899fc,
-	0x6cf91dcf, 0x2fec58d2, 0x4e1c478c, 0xf32bfce8, 0x7f5287d9, 0x6f1aeeee,
-	0x8fc2cb5b, 0xb9fca11f, 0xa36fc580, 0x689ce9f3, 0xf03bff39, 0xb64ecddf,
-	0x10a9ddeb, 0xb77f383c, 0x967ce3f4, 0xc3a88d62, 0xbc022bf9, 0xb714b3bf,
-	0x55f88eb5, 0xf70f73e5, 0x44bdfd03, 0xe5451838, 0x648bad2f, 0xcd92f67e,
-	0xfd0eac73, 0xfbfb2a3d, 0x3d3fbdcd, 0x3de91bbe, 0xc53ff955, 0x31c5a4f2,
-	0xb57ecbfe, 0xd3da0864, 0x52fa2ef9, 0xa8bf4f7f, 0x3f69c304, 0x5fef34e7,
-	0x1be097d9, 0xd2cda1b6, 0xcdbcd28f, 0xa1d2034a, 0x04386e03, 0x690df3bb,
-	0xb05f6e6e, 0xc24d453d, 0xf817ec36, 0xee7c07f8, 0xec81e59b, 0xf6c7cfe6,
-	0xc1725d13, 0xf4e5a510, 0x2c358246, 0x8fbe68f9, 0xf3c4d7f1, 0xfa77b5d9,
-	0xe604f3fb, 0xe0071241, 0xf87bb62e, 0x37f80a1c, 0xf9cf3d62, 0xd7ac3cb2,
-	0x061ff915, 0x25f39d9d, 0xbd2e7078, 0x55fc7a40, 0xcacc7fa8, 0xf3717cf3,
-	0xebb0d1bb, 0x1c7e90c4, 0x5e487f0e, 0xafd404fb, 0x7e16e01a, 0xb1e03f6a,
-	0x3f0226eb, 0x6d773bd5, 0x1d2a7ee4, 0xe5b9e81e, 0x4c1e2ebb, 0xbd789c82,
-	0x0e8064f0, 0x2ffcca77, 0x2a3d7bc7, 0xe37cb54d, 0xa47f3297, 0xa445f388,
-	0xbf515a75, 0x0f47ca54, 0x689fe769, 0xc8fe65cd, 0x5aeeeda4, 0x31525faf,
-	0xf8a7d7ca, 0xadaec2fb, 0xde749b9f, 0xab61a555, 0x23fb65d8, 0x3325e763,
-	0x79e7be5e, 0x2dced767, 0xec87bfbd, 0xfd4e1fc2, 0x3b036cc0, 0x3cbb06fa,
-	0x7f10b7a7, 0xe7e8bd01, 0x0bfb8d34, 0xef6a5fec, 0x524d3f05, 0x849d9c95,
-	0xc287a48f, 0xbef8ce58, 0x598ecfe3, 0x2eb6e7cd, 0x4844d567, 0x0567c83e,
-	0xe5185fb5, 0x5bf30bbb, 0xc2f39da8, 0x1c86ceea, 0x7bca2332, 0x3a57be37,
-	0x073193da, 0x45ef3f3a, 0xb9255abe, 0x7720cd2b, 0xd7bee339, 0xe51759f9,
-	0xbe7cc66d, 0x91b1fd6f, 0x520c6704, 0xad22cf5d, 0x9c7e5ba3, 0xfc05bdba,
-	0xc93081f8, 0x980aa38f, 0x0bf3e91f, 0xda15ffed, 0x33e23ef7, 0xe279d1af,
-	0x738fdc23, 0x7af2b18e, 0x3ca96abe, 0xa170e748, 0x6c84011c, 0x79ce1d8d,
-	0x6fe1146f, 0xbe1553bc, 0x3d45f46e, 0x1e7af5a5, 0x2bd099f8, 0xb0af54d2,
-	0xfb1dac57, 0x5bcefbf7, 0x8d47d6d5, 0xbba9f9d0, 0x37767097, 0x5bcf396f,
-	0x01f447c2, 0xdf2ac65e, 0x5b0ebe6f, 0xc3ac41d1, 0x9f1e6738, 0x539ce38b,
-	0xc304f98f, 0x43df187f, 0x1f3a19e7, 0xf27ef8e1, 0xe1158fd2, 0x7dff60b7,
-	0xdafb676e, 0xd3eb5b5e, 0xee7c25bf, 0x81ed925d, 0xf005e89d, 0x68cff05e,
-	0x7bb3cb3b, 0x7c1f84a3, 0x84d4ef65, 0x2f45ec00, 0xdf044f41, 0x79642de8,
-	0x77bfacb8, 0x7f53950e, 0x5f68c2fd, 0x2f345ec0, 0x069feb42, 0x7d15fb46,
-	0x52837db8, 0xda0e66fb, 0xbe6488af, 0xf9203473, 0x706c7378, 0x9bdf4a9e,
-	0xa814cf3f, 0xd6045477, 0xeddea2a4, 0xe5435fd2, 0x6fd43549, 0x122192f3,
-	0xf951ffce, 0xf3ce68dc, 0x32738df6, 0x4cfb671f, 0x5f6f54f3, 0x697aaff8,
-	0x51bcd5eb, 0x3d83f796, 0x9429e514, 0x9b63f4a7, 0xab573fac, 0x974691f7,
-	0x0f99cfb4, 0x5a44a6f8, 0xd2fde741, 0x99d2c24b, 0xc2fb7929, 0x5948f3ef,
-	0xe728db06, 0xc29f5c56, 0xcbd9a3f4, 0x5b7c6b66, 0x1c0d0fef, 0xcb2f2123,
-	0xb70b39bf, 0x679e8384, 0x41b78796, 0xbe5a3bee, 0xfb7a0a32, 0x0c1a9f4c,
-	0xa3395c83, 0xaf29dbd0, 0xaf5c62a5, 0xd74cb71c, 0xc0a582ff, 0x0eedcbeb,
-	0xf7cb3771, 0x3ea302c1, 0x556fafa5, 0xa37898cb, 0x27615cde, 0x2cf042fe,
-	0x9a6df6d1, 0x7d3bd7d3, 0xebe9f404, 0xf4fa8de3, 0xe40f65a7, 0xc6d2fef2,
-	0x8def5b3b, 0xb90e993f, 0xfaa7226d, 0x0f7a9d78, 0x57e74dd6, 0x25db97a0,
-	0xfb6b08bd, 0xdf298b47, 0x07887b30, 0xd389eaf6, 0x1d6f4c1c, 0x1f2ce12d,
-	0xf08ecc37, 0xb0d76ec2, 0x06ed8c2b, 0x83fb6b37, 0x1ba628f4, 0xee28beff,
-	0xf32ed2a7, 0x3065cf95, 0x0f60bcdd, 0xe515b93c, 0x7fb3872f, 0x8e5a32b6,
-	0x24bbf95b, 0x29bd2e8d, 0x5fb17aab, 0x32a5e98e, 0xe5c31dc2, 0x7a678fbf,
-	0x57dc367a, 0x7d127c00, 0xd2bc5db2, 0x258ccc1e, 0xe8d31ffc, 0xfb237a0f,
-	0x98a36af5, 0xf796856e, 0xf59e3cfd, 0x797f9238, 0x437ddf3c, 0x7bb3ef39,
-	0x3ec42efb, 0xf0c91e5a, 0xf2c9731c, 0xbcb19563, 0xb7dfe60f, 0xc5fc30f4,
-	0xbcec8ac7, 0x55ed8e5f, 0x73fade59, 0x9f841a9d, 0x9acfa75b, 0x86dfc725,
-	0xe1baa8f9, 0xd4dde4a3, 0x5595fccf, 0x7e6ed093, 0x7053edc5, 0xf69af6de,
-	0x4369fb29, 0x4afcf3f7, 0x97d47fb3, 0xf98c9dee, 0x760764d5, 0x1e7ea41c,
-	0x116a739c, 0xee9fd3d6, 0x3ef5869b, 0xe17d6f6f, 0xeb77044f, 0x5eb23f8a,
-	0x6fb47d74, 0xd85fbe26, 0x5fae1bf3, 0x16bff2bd, 0xb6afce41, 0xcfd17a4a,
-	0x7e8d1ae3, 0x1e6f8645, 0x7cae57ea, 0xc881f59d, 0x7f9223ec, 0xf8fdfede,
-	0x5bbde9ce, 0xdda8505e, 0xd5bd88d2, 0x5c81aa9c, 0x94676b9c, 0x0692b460,
-	0xed3d4a7c, 0x8d182bac, 0xa459f175, 0x5b74b89c, 0x4b181f88, 0x7fd9a091,
-	0x16d2dda8, 0xf242bf19, 0x19f41d82, 0x7d297f5a, 0xf3df7ae7, 0x9168857b,
-	0xdf7763df, 0xf75cb57b, 0xfc387060, 0xb09b19ae, 0xfd76e7ee, 0x77e8d326,
-	0x872f4d0d, 0xacffce57, 0xeace5fb6, 0xbdb665fb, 0xb9005ed3, 0x7d33fceb,
-	0xfe76744c, 0x3f9cc1c9, 0x112bb4ad, 0x577f974a, 0x72465a78, 0x65b78d7c,
-	0x07e7e424, 0xe34befb5, 0xaf82465b, 0x384e7ce9, 0xff59725a, 0x85c96acf,
-	0x47f3abbe, 0xc992d451, 0x992d03df, 0x4582ff68, 0x8ff853da, 0x3a78a8e0,
-	0xd2dde369, 0x0cb7e10f, 0x26e87e47, 0x1a71f5e4, 0xe91f25c2, 0xa58fbe69,
-	0xf9e63b4b, 0xbd9bf639, 0x7ad07f54, 0x707ca9bb, 0x9adf9cc0, 0x03e7ed2e,
-	0xfa6fe243, 0xc3fbeda9, 0x213c8e70, 0x3fd7f5ba, 0xd4f38da3, 0x3c719d53,
-	0x0acfa6aa, 0x6e1f4eb7, 0x80dbdf29, 0xf13a8fef, 0xf1126b7d, 0x6398a5e5,
-	0x9e5fcf2a, 0xfb494f67, 0xbe790bcd, 0xe7179c24, 0xff821781, 0x67ca5885,
-	0x7892be43, 0x3e3af3d5, 0xf2bfe743, 0xb04945a3, 0xae947edf, 0x7d3cf9db,
-	0xde3a9740, 0xefa46c1a, 0x2e3f4364, 0x8569382f, 0x2c49ecde, 0xdaec1ab3,
-	0xd81cf3eb, 0xe4378b57, 0xd6748c39, 0x10e0adb0, 0xece21c49, 0x2007ab36,
-	0xf7035837, 0xd86f7e42, 0x05f8b6a6, 0x54bc3b97, 0xc0f3acff, 0x68b7a8db,
-	0xe43e6c43, 0xe2fdbd6d, 0xcb1223f5, 0xdd0e700c, 0x9c875e66, 0xd87e7316,
-	0x04fe736e, 0xffde80ce, 0xa0bcbb7c, 0xc8705f39, 0x83e4ff9c, 0x9c81675b,
-	0xbdff55cb, 0x3f89f42a, 0xf384384d, 0x5e17d3f1, 0x2cfac68c, 0x41d94bfd,
-	0x71a149e8, 0x0a6eb422, 0x56ff08f4, 0xb2e3e985, 0xf81e9178, 0x810f1e81,
-	0x93a4619d, 0x683fe10a, 0xfebcb94d, 0xcb32d119, 0x5955744b, 0x64e0bcb7,
-	0x57bf5741, 0x43b3acb6, 0xb71d0bce, 0x9c2ffda7, 0x6aec375e, 0xd964a3c5,
-	0xc5637555, 0xd62df809, 0xf4013bbe, 0x854bfc57, 0xe7e28ae5, 0xbe0abd07,
-	0xce63b6df, 0x9ace9c0d, 0xedd0f8c8, 0x2af78b7d, 0xbbca28c1, 0x5dba4946,
-	0x7d615eb8, 0x1cd1a4bd, 0x36b65747, 0xd9a6de24, 0xf778be5c, 0x9f86fffe,
-	0x18f1dcbe, 0x1e5c33c7, 0x05781827, 0xa7c55b7a, 0x153ded82, 0x330dbf9b,
-	0x2d79cb97, 0xbfe1e7d4, 0xaee1e396, 0xcf3a5592, 0xd0c893b7, 0x574bf0f9,
-	0xe1066a51, 0x8de6aafd, 0xbd9b94aa, 0x7597ecc5, 0xb0ce39da, 0x918221ca,
-	0x28a1cf04, 0xdf45d7bb, 0x628fae2f, 0x18516179, 0x9cf99fc9, 0x438e708a,
-	0xdda0c4f4, 0x965477a9, 0x25e2aa83, 0x571eaa1e, 0x56c5b002, 0xfc8a48c1,
-	0x04bf3213, 0xd25526de, 0x3f00d78f, 0x1798cdd6, 0xab6f524d, 0x03f706b4,
-	0xc0e79d2f, 0x4abd7336, 0x38d1e79a, 0xefe659c8, 0xeb9da2d5, 0x36feecd7,
-	0x60ddf8cc, 0x527d65df, 0xc8556bd7, 0x7aa70433, 0xb3cb0447, 0x402398c4,
-	0xef14ab57, 0x29150ec3, 0xefa0e39d, 0x2f964e25, 0xe7946ee6, 0x838c3347,
-	0x0dd78390, 0xae67b966, 0xbe04cde2, 0xd670bac4, 0x1fdca9a7, 0x64e58bde,
-	0x4e484396, 0x7daa3966, 0x12e39d8e, 0x825af39b, 0x1f9ac790, 0x0ad0f148,
-	0xf3e47f32, 0x96709ee8, 0x4aa79a7b, 0x5d79a7b9, 0x31ff6e1f, 0x390beb40,
-	0xf9b9e25a, 0xb71e1c9e, 0x89db2a9f, 0x200f523e, 0x7a133ab9, 0x41e5c102,
-	0x67472eb9, 0xb04afac5, 0x9bfcfaee, 0xe0a3db63, 0xf1e512c7, 0xd86e4bdf,
-	0xed879da2, 0xf003c2eb, 0x8a549c53, 0xf60c5a0e, 0xe4325ba9, 0xac7231f9,
-	0x8f56ab77, 0x966519fd, 0x80ff77a9, 0xd07b29e0, 0xe9486ee2, 0xf5e1075a,
-	0x27fe6266, 0x83e785d7, 0x958e46ee, 0x7963a7f6, 0x0e479f92, 0x73bf1c17,
-	0xedefd6bb, 0x9a531619, 0x48f44118, 0x942c9cfd, 0xe1a8edf6, 0xa4076c45,
-	0xbbb9ba35, 0x19359038, 0xb32a9cf2, 0x9afefd17, 0xa4e9e06e, 0xde52f18b,
-	0xd94cb93d, 0x72f2e124, 0x5fc8dfbc, 0xf0fdb385, 0xe8de76a4, 0x347441eb,
-	0x8d71cf82, 0xe8d3ad9f, 0x74cf5d66, 0xb98ba263, 0x3741b790, 0xd8b9e473,
-	0xfada5749, 0x7af0dd12, 0x485d13b7, 0x6be211ba, 0x4b742fb4, 0xdf443b79,
-	0x7bb7d4ea, 0x0e88b7d0, 0x6de8c89e, 0x074217a8, 0xf1181ac2, 0x252cfc8f,
-	0x2a4762a3, 0x564904b4, 0x2cdc47e1, 0xd7c646ce, 0x4ac0d65d, 0x55bfa782,
-	0xab00cbae, 0x653a3ba4, 0x5cf911fc, 0xd9f88bdf, 0x0b17fbe2, 0x4e2fd52f,
-	0x4ab76c12, 0x2626f927, 0xa409db8e, 0xb0aa0770, 0xf68a50e7, 0xffb231c5,
-	0xc46fa262, 0x5e7f51b3, 0xdcc69c4b, 0x2a7fc246, 0xfb407e58, 0xef6e7ce8,
-	0x5ef6c8b7, 0xd303a52b, 0x5f6a3ee4, 0x2bf8c615, 0x264073be, 0x58d264e8,
-	0x66249d33, 0x4f41394a, 0xbadd331b, 0x7e0890dc, 0x9838d250, 0xf08699cf,
-	0xd85daaa2, 0x7d48cfa7, 0x4df578a3, 0xbe004793, 0xd83de367, 0xeca7a7c2,
-	0x494aff60, 0x7f1f9ce3, 0x5b653d08, 0x98df7f38, 0x780f7be9, 0x17b8ad3f,
-	0x250fa2ec, 0x27b15f33, 0xcb5f7b52, 0xa3bf73d4, 0xc77f8a74, 0xa62390db,
-	0xfeb950cc, 0xb9ed2114, 0x338e51a2, 0x35b9ffd9, 0x3c9bfa91, 0x94f0e15a,
-	0xf25770b6, 0xb455f832, 0xd1a63df5, 0x98b84377, 0x70139cfd, 0xcd4cc80d,
-	0x24821f86, 0xe4e46ed4, 0xfd5a9901, 0xc806ca31, 0xc9c70343, 0x47d7a7fd,
-	0x2d37e83f, 0xcfb7ee53, 0xe7a77db4, 0xbf5caf09, 0x5b584d6c, 0x5b52345a,
-	0xf3a51070, 0x039ec6b2, 0x2a94999f, 0xde07ac26, 0x4d8aaa7f, 0x317b6f0c,
-	0x4ca885f3, 0x8f82f837, 0xfba65914, 0xee99836d, 0xb7b4c6db, 0xb6f949dd,
-	0x7ed2392d, 0x0bf3e9a7, 0x82e5825d, 0xef9231b6, 0x64896fb5, 0xd5cc73fe,
-	0xed27151a, 0x97dfac5d, 0xd7f1246a, 0xe17b86ba, 0xda752e37, 0x2c7e70db,
-	0xfb3a607c, 0x499b4bfb, 0xfd5c47bf, 0x4f7eb35a, 0x6658787a, 0xa87afa37,
-	0x019a0e5e, 0x55ad951d, 0x36070e98, 0x997dec78, 0xcc2e29cf, 0x4c19ccaf,
-	0xf32fff07, 0xf05c7384, 0x37fb7a65, 0xb091f784, 0xba0e0b1f, 0xd7c83a1a,
-	0x3716e30b, 0x1a7eb315, 0xfe63ed99, 0xbc255035, 0xd4cf1d10, 0xec126fe8,
-	0xd64be0a0, 0x97d8bed6, 0xdf6865af, 0x4e995ce3, 0xbe70eba6, 0x7366d06f,
-	0xb6be0265, 0x9c16e155, 0x4a5693b7, 0xe77da6fa, 0xbb80bdc0, 0xfc0222ac,
-	0x7ed6b8e0, 0xd16b0afe, 0x77f7ca46, 0x1c546b08, 0xe98f2be8, 0xfbe5903b,
-	0xe9f7eb0c, 0xc828c42f, 0xd76ba50d, 0xfa34b849, 0xe323d610, 0x4f9c69e3,
-	0xc3e4a4b7, 0x53d3a0ae, 0x766c6b20, 0x5d0308e6, 0x1e9850cc, 0x60873e68,
-	0x55979d9f, 0xfa728f92, 0x32f41fbe, 0x1d306c69, 0x6a85d871, 0x76abc725,
-	0xe20f0a24, 0x3b443a87, 0x241d23cb, 0xea3f808f, 0x27e7467c, 0x475e1744,
-	0xeb7ad742, 0x3d6b657c, 0xde784681, 0xf4e0ef56, 0xb0977aa9, 0x5ed84f12,
-	0x67f9c89f, 0xb69cddeb, 0xf7f167d4, 0x9c3deae7, 0x8a3f59df, 0x7bd42ff3,
-	0x7ebbbf39, 0xabbfa722, 0x84efe22f, 0x3a4be61f, 0x93f9d1df, 0x9f3a5f4e,
-	0x05aba50a, 0x33dc6684, 0x0fccf6a0, 0x79883e75, 0xf8bbf258, 0xa9cebe93,
-	0x113f914a, 0xceb450fc, 0x5428ff01, 0x22f33ecf, 0xdca3b9e1, 0x1da1f1c9,
-	0x0ec1f242, 0x8dcf83a7, 0x0dd8bb64, 0x32c340fb, 0x869ddb6f, 0xb95e7873,
-	0xba06ac22, 0x5c36a9bd, 0x7d740d58, 0x29ac5d73, 0xfdeebf3f, 0xff50fad7,
-	0x2df18b3f, 0xbb1cfac2, 0x7fa3d4e3, 0xdf8fefa4, 0xeb033a71, 0x796c704e,
-	0x1edee308, 0x2ad1c1a1, 0xceddbae1, 0x08c0d2f2, 0xcfe14fa9, 0x2d738861,
-	0xfb7d894e, 0x31e70437, 0xda061d6d, 0xc146b35d, 0x754ab32e, 0x1f2aa4ad,
-	0xfbe8bd63, 0x2af5b59f, 0x7c630ba9, 0xfb6a3496, 0x4cff18d4, 0x57de3cf8,
-	0x78a75cb0, 0xe91f8085, 0x41ec2ff8, 0x71c41192, 0x685011c5, 0xad94851c,
-	0xae17b0f9, 0xe428fd79, 0x10eea574, 0x873ed5cb, 0x8428e393, 0xd8d676df,
-	0x9077529f, 0xfed689eb, 0xc8c838a6, 0xf83b5ee1, 0xeb1b6805, 0x40759256,
-	0x268b9f60, 0x94f1ef85, 0xd6cbdf69, 0xe2f8a628, 0xe655337b, 0xac32878b,
-	0x14ca0e9c, 0x89a5139a, 0x5e9d29cf, 0x3c707f89, 0x9e535963, 0x2f81917d,
-	0x4bdf6897, 0x78a62cb3, 0x321943c7, 0x98106a2e, 0x6777a505, 0x3217daa5,
-	0xdc7373df, 0x24bf5ebd, 0xea757f2b, 0xe883f470, 0x8ff6aea0, 0xddb95a64,
-	0x84970ca1, 0x59e741c7, 0x74e9c714, 0x72e82e7b, 0xeff8a7cc, 0xeb3f0c95,
-	0x3ecf1559, 0x7bfc2cfd, 0xe30a7f15, 0x9862a9f3, 0x0ec8df66, 0xf2ce9c8c,
-	0x8ca9d78f, 0xd72dfc84, 0x7fd3fc7f, 0x547c4689, 0x57694ecd, 0x690db4a5,
-	0x6ce5edf5, 0xd0f6ab57, 0x9f0388fe, 0x5fcdfb35, 0xd14ff67d, 0xf897acad,
-	0x5bf8b493, 0xdeaaf78e, 0xc0e38279, 0xd0afb8f4, 0x37ca3576, 0x71eaa7ac,
-	0xb63fba01, 0xf78d9f70, 0x851ecd4d, 0x5d9a98f5, 0xe7c01317, 0x4aadf66a,
-	0x272e2ee8, 0x5e3d5fb4, 0xd5bfb740, 0xc39fb588, 0xc384487f, 0xffad0ff8,
-	0xaf546676, 0x62054353, 0x3b60aed5, 0x1c705588, 0x8e2d72c7, 0xc19023b3,
-	0xe49ee17e, 0xc4f59aed, 0xedbf49f0, 0x1063bab0, 0x88417caf, 0x53addd89,
-	0x7e7920fc, 0x047da39f, 0xed85f0bf, 0x1791cb2a, 0x7ef147b6, 0xff7edea8,
-	0x55dbc441, 0x8dd8566f, 0x308e2557, 0xaa77aade, 0x0fe061c2, 0xc50bb035,
-	0xd2e70cf7, 0x416aa3a7, 0x145a4b5f, 0xadf816ef, 0xde98ee1d, 0x35da7806,
-	0xd61a5afa, 0x45d79232, 0xf814ff83, 0x5cce419a, 0x8e7ef7b2, 0xe77aa413,
-	0x6df9ae59, 0x51b3c724, 0xce036f0f, 0xd80a1b33, 0x65a4bd4f, 0x05cb3547,
-	0x105d23db, 0xccdb4e69, 0xd1be29f7, 0x9346fbc6, 0x4fc0ced3, 0xaacff682,
-	0x4e030f2c, 0x5ad3cbec, 0xcedeab3c, 0xb3b64832, 0x0dfb7868, 0xae88e7f6,
-	0xda5a4bfa, 0xfea9d3a2, 0xe7dfbb27, 0xee4839d4, 0x23ce25e3, 0x3f4738b9,
-	0xf7c919d9, 0xf9d93eed, 0xd12f09eb, 0xc65ae778, 0xfb0c52f4, 0x1b20e06c,
-	0x41b73fd7, 0x25f301c6, 0x5a0fd611, 0xb6673e78, 0x27ac2927, 0x9f84df03,
-	0x8f9f3b33, 0xf63ef0b6, 0xab717bff, 0xc86b15b3, 0xb2eb847d, 0x5bfe8047,
-	0xed11fbb5, 0x7fe5fd9a, 0xed6affa7, 0xa4529b7b, 0x3bef238d, 0xc20e3d08,
-	0xd53beda5, 0x796efbc9, 0x2fef9d94, 0xbee6182c, 0xe8f81e71, 0x518e329b,
-	0x043f77f4, 0x3bc16ffd, 0x596f6cf1, 0x41f7736e, 0x36c38bfe, 0x282c13f6,
-	0xa1f51cf0, 0xed9d8c7e, 0x75b1224a, 0x6dadec04, 0xa8be5229, 0x933b435c,
-	0xe88fdc50, 0xacf84fcd, 0x8f84580c, 0xa50793f2, 0x523ebaf2, 0xd9daf16e,
-	0xfbe413ff, 0xc2ecc792, 0xfe2f7b8f, 0x5d7ea4e7, 0x0efd2a99, 0x517f608f,
-	0xcc17195a, 0x4edd878c, 0x69ca9ba3, 0x9fa06e54, 0x4cc14dca, 0xed674fc8,
-	0x72891ed2, 0xf9954de8, 0x46835eb2, 0xfd07e8a7, 0xceb8a5b6, 0x2bbbbcb3,
-	0xb0ef404a, 0xed2518bc, 0xdf09bf21, 0xaf386614, 0xe9241a6f, 0x07f341b8,
-	0xf848b7fa, 0xf8e41700, 0x4ca6f625, 0xb8fab9c8, 0x789ba24b, 0x78dab3bc,
-	0xa49a224b, 0xc78b44ff, 0xdf1e7d43, 0xd3bfd826, 0xcb1864fe, 0x1efba7cb,
-	0x9fe30179, 0xc730727e, 0x04a5b411, 0xf2e6ed16, 0xaee38e70, 0x082c2a78,
-	0x327b3f78, 0x9f58ed8a, 0xf61ca4d9, 0xcb025459, 0x1ea28761, 0x3afe805c,
-	0xe0298736, 0xc2299fa3, 0x2df2889e, 0xa80e59bd, 0x3f63afa8, 0x17b10549,
-	0x4e94afc8, 0xd9f7dc84, 0x276cc196, 0x950decfa, 0xf7d0292f, 0x13eef835,
-	0xc67e0b4d, 0x3ff4bff2, 0x6fea7e9e, 0xaff3bb83, 0xdb366c54, 0xd7f5f4c3,
-	0x2418efcb, 0x0c7703ed, 0xcac97a92, 0x7fe92e41, 0x30796c8b, 0xf929e795,
-	0xeb03ad03, 0x131fb47f, 0xd63f6f60, 0x714127b2, 0xccc1cf02, 0xdbef035f,
-	0x7a759ea4, 0x42fd8dbb, 0x79462f15, 0xe774fed9, 0xb0ef7c15, 0x78729542,
-	0xdbde4585, 0x99eed0ab, 0xb2674456, 0xcdf08b7d, 0x16fb6d7a, 0x8e471b55,
-	0x01d6d9fb, 0xd4109fd2, 0xf0e42ff2, 0x7149b83d, 0x2c69e6e2, 0x05c86d5f,
-	0x8e6e2f5e, 0x1a79f8e4, 0x87b88bc7, 0x5cfd9f8a, 0x116633e2, 0xae7407eb,
-	0xd4ae7f31, 0x9dd573f8, 0x5ee0c757, 0xe5477881, 0xad1712fb, 0xbfe03e9e,
-	0x4f7af8a1, 0x5f4b63e3, 0x41f99478, 0xc417ed25, 0xfcd52d59, 0x529f4bcb,
-	0xba5c9e58, 0x9887eafa, 0x136dbeef, 0xb6705fb8, 0xe368fee5, 0xf8d5ec7a,
-	0x0f7b5767, 0xf54a5fd7, 0xa337fb65, 0x36ad9e19, 0x5d09e00f, 0xfeddefc7,
-	0x6a5ff529, 0xf242d15f, 0xf3e5ee45, 0xdc8e28bf, 0x95f027f6, 0x676ce1ed,
-	0x7be7f5a3, 0x2d6c6746, 0x33ff308b, 0xbf3384cf, 0xf72b1339, 0x9e7427fd,
-	0xe780edfa, 0x5db1f787, 0x02e9bded, 0x80e2d0e7, 0xae1d5fb9, 0xafdf1afd,
-	0xc0c4f78a, 0xeb45534f, 0x7d68fe81, 0xdfedc47e, 0xd0fb71b1, 0x768e3cf9,
-	0xf4fb0c23, 0x9ba64899, 0xbae4fd33, 0x1076799c, 0xb16d679f, 0xde09de92,
-	0x674be864, 0x1b8a6562, 0x0a87a03e, 0x3387a497, 0x1ed85a63, 0xc1d94670,
-	0xb64d9b69, 0xfcd3a8ab, 0x897f44da, 0x26d01fa0, 0xb58ea9ec, 0x80c72047,
-	0xe7cc8fcf, 0xcefb8834, 0xd07376a1, 0xbebfce29, 0x84dcf259, 0xcf3e0578,
-	0xe3f61b7e, 0x733df0b4, 0x564f269f, 0x4fdcbf6e, 0xdcaa7588, 0xeb3fb0ae,
-	0x02fe7692, 0xddba5eea, 0xa972e89f, 0x6e22f15f, 0xb2e3696b, 0xa5fba025,
-	0x81e6ebb5, 0x2c79f5ee, 0xb75feed5, 0xd3c32a29, 0x27fb4e16, 0x74f1f2fb,
-	0x8a59aafc, 0x5c279f1e, 0x7b45f9fa, 0x2dcb2c38, 0x4db288e9, 0xa3655fd4,
-	0x49c796b2, 0x395bf5d1, 0xb84f1d3f, 0x5efb02cd, 0xb9df769b, 0x70ebf9a7,
-	0x524f04f6, 0x6d4fe496, 0x6f9ef229, 0xbef25bfb, 0x0a6fc5f6, 0x81fee262,
-	0xfa91c83c, 0x7f047f7a, 0x72106816, 0x96e7c68f, 0x704eaec2, 0xfb306e66,
-	0x9b36b273, 0x9bb643f3, 0xcd3bd9f3, 0xe6bddcf9, 0x7355e7bc, 0x7b7185de,
-	0xfa09e177, 0xa103e236, 0xbe85236f, 0xfa94ceed, 0xb7d0f236, 0xc6df4291,
-	0xc8dbe877, 0x1e46df43, 0xd0f236fa, 0xdf4291b7, 0x1a39f7c6, 0x7b352a9e,
-	0xe381d629, 0xeb84f6d4, 0x5fbc00f1, 0x6049cc2e, 0x52ac2a3e, 0x24b0bd1f,
-	0x4ec7e59b, 0x0754d33b, 0x38f499db, 0x7ca2b7a7, 0xc37ab2e3, 0x75647b7f,
-	0xc76e14df, 0xdf9ae7f6, 0x6573fb49, 0xf613b87e, 0x9f55d68e, 0x13d886ac,
-	0x444df288, 0xf6b60bfd, 0x556fc0ad, 0x6fec2bdd, 0x7ee15d6f, 0xfd7207e7,
-	0xc7a2eed8, 0xdce3152d, 0x7d26df03, 0x7b6fc649, 0x6a3b461c, 0xac485fa8,
-	0x3f21e435, 0xa1f39b35, 0x35f0207e, 0x355f69af, 0x6e3c1d31, 0xbe0bef6b,
-	0x0749e27f, 0xa13af3df, 0x6cc4edd9, 0xba63cb17, 0x8f29df3c, 0xc26ca3dd,
-	0x2b24bdf9, 0x1c77db8e, 0xd3dd30ca, 0x2f4b4d0b, 0xdabcb3e5, 0x58ab5f99,
-	0x8cd94e30, 0xaf59fb15, 0x73e68c4e, 0xb60d16e9, 0x0dff9041, 0x440e0f70,
-	0xe868e898, 0xbf10b8b6, 0xfd533f65, 0x4353bb61, 0x4c4396fc, 0x16d7d3e5,
-	0x17b5ef98, 0x1f2a6d5d, 0x878cef68, 0x96ff4873, 0xd64b9f06, 0xe7cce8b9,
-	0x4bd686f9, 0x847f3c56, 0x25bc56bf, 0x9a32d3e5, 0x7b40b787, 0xfe1f239f,
-	0xe014ef39, 0x16c5bcaf, 0x54bef38b, 0x9d44873b, 0xb72e5cf9, 0xae2bbf0a,
-	0x5dcaee8b, 0xed4b1bc2, 0x2536b4bf, 0x71dd1d33, 0x14255934, 0x2472192d,
-	0xe57d0837, 0x8246278d, 0x8dd4aaae, 0xbf2a2ec9, 0xc56c0955, 0x71d3ec45,
-	0xa4ae123b, 0xf8b4fff2, 0x75a2c91e, 0xef05b64a, 0xba3e0f9d, 0xbde04d23,
-	0x9f6b1391, 0x3cb8e68f, 0x6d92fe8d, 0xc1d008ae, 0xf59526c6, 0xd4cdd814,
-	0xd93a2eb8, 0x011f14d8, 0x8c7ca6bd, 0x717297e2, 0x0bdf49b4, 0x9aa147c5,
-	0xe69b8efd, 0x2a90f17b, 0xf36a40ef, 0xf592ee5c, 0xaf6cba45, 0xe7d7b3df,
-	0x47d3527b, 0x96be362b, 0x3f7d0b79, 0x2e7f783b, 0xd65784ae, 0x2f79e6ef,
-	0xdadf6cb5, 0x1d7bd297, 0xd7985dbe, 0x45c6b7f2, 0x7ce3495f, 0x87c65db9,
-	0x89f9b5ff, 0x4fc4fcc7, 0xc27a6cef, 0x8541fb0e, 0x1e876035, 0x46e4fe5c,
-	0xae18e23b, 0xbf91b6db, 0xcc56da2f, 0xbefd00f6, 0x7c7aa7da, 0xf28f86b3,
-	0x1706cab1, 0x60ffb3cd, 0x23ca4fc9, 0xa14b1c64, 0xdc35fa3a, 0x4db8b813,
-	0x66bcc3c9, 0xe3b0ed14, 0x1a3bff1e, 0x37dd09df, 0x17a7871d, 0xabbd86f6,
-	0xdf20f145, 0x89993ed3, 0x0f4472cb, 0x39b92fd3, 0x0869719d, 0x0a1fd5eb,
-	0x8e70bed2, 0xd7e88764, 0xcf695587, 0xad123c43, 0xd83db973, 0x85e43a6b,
-	0x0ffbe597, 0x8d0e7455, 0x2ede87ca, 0x169455c4, 0x744d568d, 0xd23e335e,
-	0x0b660fb4, 0xfea2bec3, 0xa67e8966, 0x69498cfc, 0xce37faa6, 0x67e21a18,
-	0x672aefce, 0xe99575fe, 0xdbaa975d, 0xe3856efd, 0xbf9ac67b, 0xd33b7a53,
-	0xf6a60dd9, 0xe99a6255, 0x9b25975d, 0x133c65df, 0x8fa1d995, 0x41f76b95,
-	0xb4dafb66, 0x9dfcadef, 0xafda6226, 0x7f3cd303, 0x8da5e794, 0x1dba08fd,
-	0x9ffe367d, 0x1979ddd6, 0x898f19d1, 0x3bd85bf8, 0xe479667c, 0x42a9eb08,
-	0x669543ae, 0x92caaa8f, 0xff2aa8f6, 0x9be23b11, 0x24d6ff09, 0x93754942,
-	0xaa46f6c2, 0x938a48ef, 0x7df1dbf9, 0x075ef9a7, 0xf284bbfa, 0xf6316a43,
-	0x35796857, 0x42e71bcd, 0xb047ec35, 0x6bfde983, 0x19f4eafd, 0xb43ecf7a,
-	0x3760df1f, 0x6d8ae7ef, 0x23f60e3b, 0x8a2f4cbc, 0x497c43cd, 0x5b54cb65,
-	0x74e5f671, 0x8bfdf3a6, 0x7fb616e5, 0x857e1c75, 0xdca3ace9, 0xddf191ea,
-	0xd51f18ff, 0x0d6f695e, 0x3445bfa5, 0x1799f81f, 0x013c54ed, 0x5e03d645,
-	0x432e81fa, 0x0dd492f0, 0x753c74be, 0x7ca42de2, 0x1c33fe31, 0x004a11f1,
-	0xbc32f27c, 0xfad478e8, 0x2c13e45f, 0x013c1267, 0x3fa42786, 0xff742a31,
-	0x20efc2dd, 0x84506c74, 0x3c6ef94b, 0xed24bb4c, 0xe4d30336, 0x2977dbbc,
-	0xb3ebc81e, 0x7bf9592e, 0xc914bd27, 0x9319f538, 0x93b3fbcc, 0x7ee48a7e,
-	0x81297999, 0xd36ffddb, 0x8fd177d1, 0x8d099fee, 0x5defd6ff, 0xddac1a2d,
-	0x46211a4b, 0xc44ffb7c, 0x4072ebaf, 0xe749e74f, 0xf0d2e379, 0xf6ed4cef,
-	0x951e5e1c, 0x3edaf1ca, 0xf3a88ecd, 0x4ed69f63, 0xca98b71f, 0xefa005dd,
-	0x17b009fe, 0x4b4c6eaf, 0xe317be36, 0x3b63655b, 0x788af26f, 0x5dc38b4e,
-	0x8a473809, 0x4d77c857, 0x27d5df8e, 0xe388fe01, 0x26bd6cab, 0x7fc7d751,
-	0xe4593c3a, 0xe9c85f20, 0xb3617589, 0x3d78768d, 0xed2c1a6d, 0x7e39fa35,
-	0x7a3872ce, 0xaadff636, 0x0508d15d, 0xfdeaba5a, 0xcf3a2e91, 0x8f7c5957,
-	0xef7f660f, 0x85cf3e46, 0xec2e636b, 0x513cba70, 0x0fb0aab1, 0xffcafdce,
-	0x9c31e579, 0xb615befb, 0x9fa3c804, 0x840aa07d, 0xc679d0ce, 0xe1a7c472,
-	0xdd3fae92, 0x10f7c912, 0x1784553f, 0xea25a6fe, 0xe9975cfe, 0x0b3bdd5c,
-	0x41deffe3, 0xb8c08ee3, 0x1889ad81, 0xc4cfe3d7, 0x1915beb8, 0x57d9dd31,
-	0xbd66b4f4, 0xeab6f394, 0xeecd64f6, 0x791ef90c, 0x6270f7c8, 0x1e47be41,
-	0xc8523df2, 0x4dbef8f7, 0x6c0c2ff3, 0x7e83cf68, 0xb22b1fea, 0x75bcf96a,
-	0xbf7e4166, 0x80f08945, 0x78a2dcff, 0xc1bc70fa, 0xc4def966, 0xd57590f2,
-	0x49da6bd3, 0xedd03306, 0x84392e0f, 0x8c6e6e31, 0xc7e53588, 0xea9afa39,
-	0x4c52ba17, 0x0e25d7e5, 0xef5f9536, 0x7fe533ce, 0xa9a57598, 0x18cf64fe,
-	0xa347fe53, 0x9fd537ae, 0xca6a9dea, 0xc7389f4f, 0x51667f54, 0xc6fca9b1,
-	0xe54c4bd9, 0x4ccb7c73, 0x3fe579f9, 0xa9bfd535, 0xdca98576, 0x9c565c2b,
-	0x77a17b77, 0x865fde11, 0x2de945de, 0x8d38656f, 0x9c7a3aeb, 0x7977dba5,
-	0x5072694e, 0x36dea1bf, 0xd7ee25d0, 0x68070e80, 0xc0be67f7, 0x7e1bd2b9,
-	0xf522a0c9, 0x417d23de, 0x42f5a137, 0x1e4747cb, 0x35a6e8b8, 0x7a2a7a2c,
-	0xc4f895a6, 0x140e2be8, 0xf57e51a4, 0xad338553, 0x5f465fc4, 0x54f9e07d,
-	0xb53d37ca, 0x3b0f964a, 0x51e51170, 0xf320df4f, 0x1a8b05d3, 0x7af90c8f,
-	0x31e69f86, 0x6ba907fa, 0xd26ed23d, 0xa769bc6d, 0x80f0883d, 0x01e04d78,
-	0x13e89069, 0x4fa201e9, 0x7d12afa4, 0x710ba596, 0xe913e890, 0xf13fd221,
-	0x7fa4f7fd, 0xfa4c3d22, 0x49b7d227, 0x847a44ff, 0xefa44ff4, 0xf4e6cfd5,
-	0xb71f7a83, 0x397d43fb, 0x6beb47a7, 0xf5c7fbf9, 0xb9fe9c75, 0x5ddfcfde,
-	0x433b7443, 0xba31ed90, 0x7e1aabff, 0x76edd847, 0xfd1acedb, 0x9e578ac2,
-	0xb2bfbaa7, 0x46b456a1, 0x5ab69f62, 0xba394f63, 0xf33d90fc, 0x6538ab5b,
-	0x0f5ebf90, 0xe10d26f7, 0x98bbfbf1, 0x8fdf6b6f, 0xf203e989, 0x520a9d69,
-	0x9f28297d, 0x2aba5f99, 0x0fc7f886, 0x81b5a9be, 0x74b43e5e, 0x0bfb7f7f,
-	0x87da4e8d, 0x8c873378, 0xebbbf2e8, 0xf8ceef7e, 0x1e5f831a, 0x8e3d6cfe,
-	0xf3c7f747, 0x473e219f, 0xf1eb93f7, 0xef6ad741, 0x707ee923, 0xef47fe3d,
-	0x6092f0b7, 0x1acd77be, 0x512dcb2b, 0x38c41156, 0x35cf9c7a, 0xc43c968e,
-	0xe9535c3b, 0x3eb738e4, 0x23ef1df4, 0xde2f3d52, 0x25fcdb99, 0xf2edcfd5,
-	0xe6d1f7bb, 0x8f3ce541, 0xb63e4bc2, 0xc5a35ed7, 0x43bda01d, 0x753bf396,
-	0xfc831188, 0xe1db2941, 0x7da8551e, 0x001c577e, 0xfaca47ea, 0xfe97f441,
-	0xdd178d15, 0xc4068fb5, 0x6e21e4b5, 0x93b5406c, 0x8c36c6e3, 0xb9bdf209,
-	0xded7b1e9, 0x4e22aad3, 0xd8c7e638, 0xfaa74f47, 0xefcf0266, 0xf00f73ee,
-	0x5c5a7e50, 0x53a46f5a, 0xebb5de43, 0x62e67d66, 0xe97c755d, 0x4bd7d778,
-	0x9e21b7c7, 0x5dfcf18a, 0x6eba17eb, 0xafa5eba1, 0x2ea5e153, 0x977f03fc,
-	0xfad74faf, 0xfffb3ec1, 0xb70cfacb, 0xcc7df0b6, 0x07874ab0, 0x7ad77d70,
-	0x262edcdd, 0xf1783ee0, 0xa441f725, 0x5f7cd24b, 0x8a967f80, 0xc05c1331,
-	0x81cd4b91, 0xdeb4279d, 0xef59eff2, 0x077a90e1, 0x7cd60ae2, 0xbd79769d,
-	0x1af521dd, 0x7ed60b62, 0x374ced2d, 0xe43d7ce2, 0xed1fb1b6, 0x1e3d70cd,
-	0xa3ccebc3, 0xf1a71c75, 0x96a243a3, 0xd7120fcf, 0xf1df58fc, 0xcb8f52da,
-	0xee72cc5e, 0x6e59a778, 0x514df09c, 0xd09dc623, 0xd68e442b, 0x6837e1fc,
-	0x9a275efd, 0x7bd0dfb8, 0xf26837f2, 0xf93de869, 0xf26886e7, 0x01488a65,
-	0x3c2f1a9f, 0xbded2e12, 0xd92ef183, 0x2f46926f, 0x8c556e69, 0x9f083d06,
-	0x55f1cc15, 0x8b9077bc, 0xbf9cfd71, 0xfd38045e, 0x3f7208a1, 0x22918993,
-	0x6c2123ff, 0x79039df2, 0xf55ab33f, 0x2ce427fd, 0xc2e65efd, 0xd8abdf70,
-	0x4e44af77, 0x28f78f99, 0x4b8c15c6, 0xe303bb47, 0x1c9f2cdd, 0xbcb1a470,
-	0x8b657d84, 0x6f7fdaeb, 0x6e92f9d0, 0x9106f795, 0x3a60dee2, 0xe9d7966d,
-	0x86fe41fc, 0xed0215ac, 0x71cdb826, 0x1ffb7a38, 0x6b0ac6ba, 0xfdfccf41,
-	0xfa7bb987, 0x66f3aec3, 0xb0f1a0ec, 0x7b19bf83, 0xf7cc78c5, 0x163ed8cd,
-	0x39d98699, 0xbd3179cd, 0xa74e793b, 0x26f1aee7, 0xcf7c6b08, 0x1af1d678,
-	0xcf1d4f8a, 0x2f5e02ff, 0x2fd78774, 0x37290b06, 0xa23e4a47, 0xac2ab7e3,
-	0x1f671ef3, 0xa5445c63, 0x33e9e243, 0xb87b8c80, 0x3cf15775, 0xfd17a93e,
-	0x7545ef81, 0xd43cb8a3, 0xc736250e, 0xc77f5e70, 0xef83ccec, 0x7c122746,
-	0xea7c39d7, 0xd9cbc250, 0x492660fc, 0x0d93e230, 0xfaef7c0d, 0x07aab3dc,
-	0xeaa57ff2, 0x4f01eb5e, 0x3f655379, 0x95e6f8a0, 0xc509f864, 0xa3e3eee6,
-	0xaf121d2b, 0x32b3feba, 0xa7f788ad, 0xca241570, 0x3de4d5f7, 0xe81e5d72,
-	0x8be3261f, 0x3dccfbf5, 0x232307c9, 0x1feb1f24, 0xbeaef926, 0xf38ed49e,
-	0x48cfd449, 0xf74953e2, 0xb03eb045, 0x1a4de5db, 0x78ca7f0a, 0x75a79261,
-	0x97a3bfbd, 0x5af03f7c, 0x68d0f991, 0x643f8fca, 0xef2a0113, 0xf14c2f18,
-	0x946f8564, 0xfa16bbf2, 0x44b098fd, 0xfc0cafd2, 0x611ddc20, 0x32346f7a,
-	0x8f94ce2b, 0xd533f4f2, 0x6a95198f, 0x0ef58f2a, 0x4fc79531, 0x7be537cc,
-	0xaa655d17, 0x58f667df, 0xefafbe53, 0xa4fd5306, 0xbca669f2, 0xe49297ce,
-	0x76a03127, 0xc0fda9ae, 0xfd5312ba, 0xf9857f14, 0xf7bf54fd, 0x9e025648,
-	0x697f9477, 0xbc87966b, 0x96116aaf, 0x90ef5d91, 0xde5a3afc, 0x5ce89907,
-	0x6491efc4, 0x0cccfd34, 0x8a8dfa8f, 0x46292673, 0xae24f7e1, 0x60f99b73,
-	0x3f39a261, 0x2af795de, 0x2b9c6e96, 0xa828fe34, 0x6a929e80, 0xf3efa6ad,
-	0x347c6a86, 0x9eb2e457, 0xefeb5dfe, 0xff5a621b, 0x4e5d7c50, 0x05e7cf0f,
-	0x6f9ed2dd, 0xf9ec179c, 0x9ec0bc46, 0x9ec3cc6f, 0x7b0fac6f, 0xf61cb1be,
-	0xc179637c, 0x8c1d3321, 0x83a66238, 0xe99a8e2b, 0xd0cfa740, 0xd5b2baf5,
-	0xa7c21f4c, 0xb07f94f8, 0x6a7f575e, 0xf5d09fa6, 0xd78b0921, 0x1153826f,
-	0xfbfca48f, 0x642eb5eb, 0x87d73abd, 0xf6f90df0, 0xbe50e0da, 0x48785b27,
-	0xe4b77815, 0xd79e6d51, 0x27e5ad0d, 0x7d5bb6c3, 0xae7de6bf, 0x5f4355d1,
-	0x871d5749, 0x1f070f9e, 0xffa4347d, 0x02f9fbd7, 0xfe3b3fa8, 0xf41db262,
-	0x45df2ed1, 0xee1f036b, 0x49b715dd, 0x77bcba7a, 0xe39533f2, 0x9a598e18,
-	0x82ebf014, 0xf036df18, 0x6bb39bcb, 0x1367f815, 0x458ed145, 0x8ff9cb88,
-	0x17e464b0, 0x77f7940c, 0xdf2b7645, 0xe2f9d07f, 0x17192482, 0xf35432d8,
-	0xdc647af3, 0xa543f3ce, 0xe3ca24dd, 0xe2e338e2, 0x83bf796c, 0x05e499d4,
-	0xe1c7c039, 0x47c041f0, 0x69df85b3, 0x39b9b56c, 0x86ffc46e, 0x83f7e02a,
-	0x72f90b1c, 0x35df2680, 0x0070e47c, 0x85eb41fe, 0x1c1d9ce9, 0x5be29870,
-	0x99736e87, 0x892d39f2, 0x76c3faa6, 0x79e54dbb, 0x79532cc1, 0x298f21c1,
-	0x28c8e23f, 0x8e2bfd53, 0x2bf94d7a, 0xea9a275b, 0x9169fd5f, 0xda249f29,
-	0x077e061f, 0x3e8f522a, 0xe2553433, 0x7e382dc9, 0xb19dc16f, 0xa6a7def2,
-	0xba72eb5f, 0xd3ecf71e, 0xde5439e8, 0x71f7681f, 0x5f43751c, 0x187be1e1,
-	0x129f4d0e, 0xa7c03d66, 0xde772dc5, 0xe39bf0a3, 0xe578f596, 0xd3417d4e,
-	0xdd39740f, 0x35ecaf10, 0x082f2bc6, 0xe03dfeeb, 0x3dd6d2ff, 0x7681fe14,
-	0x9f86df39, 0x88def9da, 0x3c28570e, 0xda38b533, 0xefee8e2d, 0x25b2d8f5,
-	0x1465259d, 0xfef41dfd, 0xcad3cd98, 0x365fdd6f, 0x4fd5a79e, 0x0bf0d5f4,
-	0xfba567bb, 0x305bc7bb, 0xbe67ce4c, 0xd4f372c5, 0x32cf8e6c, 0x3bdf83bd,
-	0x51fdea5b, 0xf3b74ab9, 0xe323105b, 0xdd8c44a7, 0x79edfa0d, 0x44cf893c,
-	0xfbe468bb, 0xff9c5a47, 0xee5b6b4d, 0xf3454419, 0x7bda4ded, 0xe81b0160,
-	0x9258d261, 0xd884f2c3, 0xb35765b6, 0xc7a2e493, 0x3f6cacea, 0x35ddbfe9,
-	0xceb8248b, 0x49031bfb, 0x407d01ef, 0xb4be81b6, 0x71e54721, 0x1b9ec1ae,
-	0x4df6fd81, 0xfb3d9c67, 0xced08405, 0x754fa90b, 0x874c6f43, 0xaffe3cfa,
-	0xf143ede3, 0x42adeba4, 0xd74c338b, 0xd7f1d2e0, 0xf0d07769, 0x707fdfa7,
-	0x6d15b32f, 0x8a3df272, 0xd2db8889, 0x4725afd7, 0x86ad65d2, 0x3f03d40f,
-	0xa15ea9ea, 0xfb031d9a, 0xc7708772, 0x43a1bab8, 0xc2bffd3d, 0x9eff8e8b,
-	0xc4f557ee, 0xc2f9421f, 0xeab7dd77, 0xd9ff4e89, 0x3e06577b, 0xb468e321,
-	0x5ba40975, 0x677d3fd8, 0x6f3f7994, 0x8d7696cc, 0xa2beda71, 0x6799ddf3,
-	0xf60217e6, 0xaa5586f1, 0x39e42fc6, 0xc4529c5e, 0x3a8b11ef, 0xe533cb17,
-	0xcfd62f1a, 0xc80f85d7, 0xf5aee0f7, 0x455c2516, 0x9b6692f9, 0x15a048d8,
-	0xf38fbbfb, 0x1b93bf66, 0x449efe71, 0x3726cdc0, 0x49b4b71a, 0xb94fec09,
-	0xc5ecbdfc, 0x5c7ef94e, 0x8bd9bbe8, 0x2f17fd35, 0x86df602a, 0xcfee65fa,
-	0x8f6bced6, 0xe12b7cf0, 0x0ba5bd67, 0x02de8d7e, 0xe8311df2, 0xf3b4aac3,
-	0x8e969c70, 0x24fc3737, 0xc2795df1, 0xce16446f, 0xb76b46f3, 0xf89d7471,
-	0x9d2afdd5, 0x1cc3c27e, 0x171a1faf, 0x4affd670, 0x1a7e7774, 0xd3d37fdd,
-	0xdff4e83e, 0xa85f877c, 0x1e8969c3, 0xff043e05, 0x57e8dbbf, 0x8248f3f9,
-	0x3127fd90, 0x6ab48ff0, 0xb98d89fd, 0xf44fdddd, 0xf1c5d8ad, 0xbe2cab10,
-	0xf25c40ff, 0xef1fea19, 0x3ce5deb0, 0xf8fb8090, 0xd3bb3493, 0xe4d6f3e5,
-	0x7ef2d1b0, 0xe55f8740, 0x2898eef5, 0x1f1373ef, 0xba77d815, 0x08aa7f1f,
-	0xfbaa42f6, 0x466b7c49, 0x3f75fe31, 0x14707149, 0x61b339c3, 0x484f0db1,
-	0x7b7c3eb6, 0xcbbb8461, 0x403ad27f, 0xe4f4e7c6, 0xc97e9947, 0xb8cdfdc3,
-	0x73f71574, 0xca453b2c, 0x2cf78d6b, 0xd90d9d03, 0x67986c26, 0xdffbadab,
-	0x23929819, 0xf852d1f7, 0xe21b7bd2, 0xac28567e, 0x84572c07, 0x7cc4071e,
-	0x6c5fcf5e, 0x3285f2d2, 0x992acb7f, 0xc5ded56f, 0x3bd9aada, 0x98a44f30,
-	0xedf0f40f, 0xf3043d9a, 0xe0798a40, 0xf21af83b, 0x83c86be0, 0xbe0f21af,
-	0x0d7c1486, 0x51444bdf, 0xfd2a9e72, 0xfb0de33d, 0xf19efe03, 0xfe09b906,
-	0xfe1e631e, 0xf87d631e, 0xf0e58c7b, 0xe1cb18f7, 0xe1e631ef, 0x87d631ef,
-	0x8798c7bf, 0x1f58c7bf, 0x1e631efe, 0x7d631efe, 0xe58c7bf8, 0xcb18f7f0,
-	0xe631efe1, 0xd631efe1, 0x58c7bf87, 0x629d737e, 0xacdd07f2, 0xba503bbd,
-	0xa3e98e3e, 0x2928b539, 0x3ff7d687, 0xc7e7ff23, 0xf3ac54b6, 0x6efc25de,
-	0x47845560, 0x44d373ae, 0x2116eeb9, 0x0e7db9d7, 0x76edf3af, 0xf1942f99,
-	0x03f4a1c2, 0x74f8cabf, 0x0a4157e9, 0xf8520abf, 0xafc29055, 0xfd2ade32,
-	0x57e1482a, 0x55f877c1, 0x82afc290, 0xa4157e14, 0x8520abf0, 0xfc29055f,
-	0xbf07682a, 0x55f8520a, 0x157e1df0, 0xe0abf0a4, 0x038231fb, 0x2e1d15fe,
-	0x26e9f9c8, 0xd0e8943d, 0x4cba87a4, 0xc6f9c879, 0x8df390fa, 0x8df390e5,
-	0x8df390e5, 0xc6f9c879, 0x8df390fa, 0x88f11bf9, 0xef296f71, 0xde41db1b,
-	0x9a73e637, 0x86c1affc, 0xf9c37935, 0x46b69157, 0x2e298f29, 0x9e72eb92,
-	0x58ff059a, 0x1c92b86b, 0x763921eb, 0x8d676fc5, 0x89f892bf, 0x2b976f16,
-	0x6f582dda, 0xbad37bf6, 0xe38282f9, 0x3bfe7383, 0x7f75cb91, 0xbad1ff2b,
-	0xac14ede7, 0x90cb6c37, 0x3dede970, 0xd522a5c2, 0xbbe577eb, 0xbe3a17af,
-	0xa5f98f5e, 0x28520e01, 0x910710f3, 0x1f33bb77, 0x2d5bedf1, 0x5d0b8c8a,
-	0x4372e329, 0xe349aae9, 0x3b2d5b4b, 0xbb50440e, 0x83c562f6, 0x5699077b,
-	0x0f96c871, 0x43e6d53c, 0x89cba89e, 0x6b83e2d5, 0x903c42af, 0x7f6eb70e,
-	0xf7c13e24, 0x0bb746dd, 0x738d197b, 0x8ec217cd, 0x64985bdf, 0xda04f297,
-	0xea1cdf41, 0x0c9bbc57, 0x4732bdf4, 0xff3e7b9e, 0xe8caabb2, 0xb5edd0fb,
-	0xdd1ee157, 0xeed908a4, 0x33478f37, 0x2a34a71e, 0xc9fef09b, 0x8bc2ede8,
-	0xd4bfb1fb, 0xddba1ee0, 0x71e32f65, 0x4eff7c5d, 0x4378b7ef, 0x2c17df32,
-	0x13e3ad16, 0xf0a127d9, 0xde3ae6fb, 0x62af7e68, 0x0fe2c47e, 0x2ffc8ec1,
-	0x7121c3df, 0xc3dcfbf1, 0x6c7866b9, 0xc4dbe221, 0xe40ef95e, 0xabc5e1e4,
-	0xbe5c137a, 0xf2077c80, 0x5f6a2f9a, 0xf966fce3, 0xcf93240e, 0xcf8f8648,
-	0x857e41c3, 0xe298ffdf, 0xe5e968df, 0x15e0bdc6, 0xdfd404b6, 0x0b503c2e,
-	0xaf790906, 0xb6579f55, 0x57096238, 0x95e22f40, 0x11fd0378, 0x7a0198e7,
-	0xf8d8f3c9, 0x56a9907d, 0x46fc0d97, 0x5d8a7397, 0x7542ec72, 0xf7df0c74,
-	0x2e13910b, 0xb8e6f636, 0x8e3d7f8d, 0x93ef83a4, 0xce15df2f, 0xf88f8572,
-	0xb9e6f807, 0x5977193c, 0x91c3ecb9, 0x38aed496, 0x8129d392, 0xf3df78ad,
-	0xe88eea74, 0x11cb0a51, 0xdb5fc087, 0x7be79f1a, 0x5eabc582, 0x1710fbe3,
-	0x96881f1b, 0x7fa4aaf7, 0x9bc34ca5, 0xa85a6f6e, 0x16994fad, 0x5ebc743f,
-	0xe74bcfbe, 0x71f7bf30, 0x72c6d1b1, 0x28bca846, 0x880feb84, 0xb46f2b73,
-	0xc5d3ddf1, 0x27578b6b, 0x777eee8a, 0xcfe32bc5, 0x349771b5, 0xa84e38da,
-	0x2b477b5c, 0x965877f4, 0xd2e8726a, 0x27efe66d, 0x4fe44272, 0xad44fdfd,
-	0xaf5bf14e, 0xa83964cc, 0xee71c6d6, 0xb94857f3, 0x0110ec48, 0xbf9867dc,
-	0xef059c62, 0xe5dfcc58, 0xd0dd28f5, 0x7c9a3bd1, 0x12830934, 0x8a5ea7de,
-	0xed32be60, 0xcfce3f52, 0xe9c894ba, 0xe4b2978d, 0xd11dac77, 0xbca16b4b,
-	0x26beff5f, 0x1c44cd17, 0xb2e40165, 0x1dd74c3e, 0x2218d744, 0x4357e357,
-	0x302bcabc, 0xf9b24fc3, 0x734e2156, 0xf7c146d2, 0x7e432691, 0x90d982a2,
-	0x2fb00aa7, 0x3ef90a52, 0xef8544c6, 0xbe1e4cb7, 0xb407db4c, 0x11f3042f,
-	0x37c3f77e, 0xf1006a7e, 0x3b7db337, 0x7d77582c, 0x6dfcf83f, 0x64e60efc,
-	0x7bc762bf, 0xcf4d3e81, 0x743de9d6, 0xd4882c5f, 0x694e63ec, 0x8fb4eaff,
-	0x9c7e5801, 0xc446f227, 0x2d802eb3, 0xb0b69fb3, 0x6ca8aa84, 0x1b9c9e59,
-	0x94236379, 0x6ed37fac, 0x9162df32, 0xfe489ff7, 0x717578e3, 0xe50fb0a4,
-	0xf92ad78b, 0xe1d79788, 0xd8d87afa, 0x777ac349, 0xe74941d1, 0x03eeccfe,
-	0x5df960bd, 0x4cff2619, 0xf84a5a68, 0x105a3ec6, 0xfc63fad3, 0x5c84d0d2,
-	0x889f1de1, 0xf9f5c877, 0x02e2208a, 0xdbf96ae7, 0x8ff2bd9e, 0x278c9c6b,
-	0xedcd8fce, 0x3fe22377, 0x38fe65fe, 0x7f1ab15f, 0xf14daa37, 0x3de57379,
-	0xdf5809c8, 0x7e76ecc8, 0xa66660c7, 0x212f9e4b, 0x72db9676, 0x845df2dd,
-	0x694b7b10, 0x846f3cb6, 0x8f3c9dd5, 0xb66e3afd, 0x3ef3ea57, 0x33df336e,
-	0x5cead3d5, 0xbff83769, 0xa0f127ba, 0x7ffbde45, 0xf1d812c4, 0xa06bd122,
-	0xe6016fb7, 0xbde208fb, 0xcf1f7e19, 0xa3477f4f, 0xef694f93, 0x74f4e865,
-	0xdf22eeac, 0xda712897, 0x9e81aadd, 0x7c28d6ca, 0x4ea4b11f, 0xadf627de,
-	0xfcbde451, 0x8f57ec1e, 0xdf9af9cf, 0x17fc7a51, 0xc350b211, 0x91fb7cef,
-	0x5d291cd7, 0xdd53fdf8, 0x7f926caf, 0x6f103306, 0x9c36b73f, 0x7afe41df,
-	0x018fd158, 0x87b6647f, 0xf11269d7, 0x1a9fd434, 0xbe29fbe3, 0x07238897,
-	0xf05c6f61, 0x7df8b7f3, 0x29bd9ae1, 0xf161eefc, 0x78d5bcee, 0x61ebe547,
-	0x89723bbe, 0x2e9d8b7e, 0xea90e43b, 0x973e58c6, 0xeed1f417, 0xf6768ba9,
-	0xf3ebe9e7, 0x0794ae60, 0x9c723c8a, 0x453e9a0b, 0x354db308, 0x7fe793d5,
-	0xedd43ee8, 0x95f6a1a2, 0xbe2af7d0, 0x7b029ecb, 0x5760dd89, 0xb631edd5,
-	0x7073e3ac, 0x77b7cf9e, 0xaf8dbbff, 0x4d4776eb, 0xa9d85d9f, 0xe84f66cf,
-	0x9d7fb903, 0xbd1d82e2, 0x11bee9cc, 0x8765f5f1, 0x14f0886c, 0xf2dce293,
-	0xe4bb92dd, 0xb72525bb, 0x9b3f31e6, 0xc7c9358f, 0xbc5187bd, 0x9402cb8f,
-	0xdfbcf7c6, 0x657bade7, 0x53d01ec0, 0xe0f7cbd0, 0x7b5e5ccb, 0x2a2e419c,
-	0xef4c526d, 0x17f9e818, 0x721da573, 0xc019a93e, 0xa6b74ddf, 0xd086f1d8,
-	0x108f127c, 0x46baf837, 0xaa3b7a27, 0x932571c7, 0xf941c552, 0x9dc114ae,
-	0xfe33c722, 0x9349514e, 0xaa063df9, 0xfedd72cf, 0xafee28dc, 0x4ef345d8,
-	0x3862ea41, 0xa78c0f09, 0x3fa87bf6, 0xebc38f37, 0xd80c1a51, 0x8f983760,
-	0xcfca1678, 0x186c0575, 0xbe51a4a7, 0x2b5be28f, 0x89adf1c7, 0x2e40e7b5,
-	0x03ecbab0, 0xa360f28c, 0xbe78cf7c, 0x0411fbf6, 0x65cbcb2f, 0xf3dc2784,
-	0x867defd2, 0x8358abe2, 0xd629acbf, 0xad365f2c, 0xe67d61b3, 0xc35ef0f4,
-	0x971d1a97, 0xfbe18e34, 0x2f5665f5, 0x69f097df, 0xb2ebfef8, 0x27e1bbf0,
-	0x90fcd399, 0x8d79052d, 0x3c097d2f, 0x829e06f7, 0xd23efc19, 0x678e70b2,
-	0xe26ae39e, 0xfbe276f9, 0xe40fc201, 0xe3115715, 0x8fc4e89b, 0x66b2c038,
-	0xc176faf3, 0x65df2513, 0xfde62e6f, 0xb3eac8b7, 0xac708cbb, 0xfb819fdf,
-	0xdf68735b, 0xe127fde3, 0xcc7df1f2, 0xc8dc0f53, 0x3806fbbf, 0x8f28e781,
-	0x3bde027b, 0xba61ba22, 0x4167e9d6, 0xfacfdc81, 0xacc35178, 0xec3f0ed2,
-	0xf7a9f6bb, 0x06f3e420, 0xffd86f5a, 0x76a7da7b, 0x71a4005c, 0xddf265ed,
-	0xab7dd0ba, 0x9f7d57ef, 0xdf56fbea, 0x8ad98fcf, 0x174a8982, 0xbdf3a1df,
-	0xf06eb9f6, 0x77834934, 0x84aeb6ae, 0xc18557d7, 0x986237ae, 0x53f3dfdc,
-	0xfd1ffbcd, 0xbd54dfa1, 0x03306c7c, 0xfaf53df7, 0xe3f3b8fa, 0x03ec3b64,
-	0x30ea5bd0, 0xe5fd674b, 0xe262df5c, 0xfc9da51f, 0x04aafb63, 0x0a1d8ff0,
-	0xdf96e1fb, 0xe5bee523, 0xe17bc8cf, 0xf8bf9667, 0x77aa2cf6, 0x0b8dc1fa,
-	0xca2ff78c, 0x2c5f9282, 0xfc0b7924, 0x0f269163, 0xe5f4cc6c, 0xe7ec330d,
-	0xc99ffbb2, 0xdb98fec4, 0x6f0a7792, 0xf9bcd1a8, 0x3f3fa3bd, 0x5787d2f3,
-	0x5dcebbb9, 0x6b251e7d, 0x3b15b5de, 0xf493788d, 0x0756777e, 0x38a55b9f,
-	0x6953e8b7, 0x61f33163, 0x8f7a4891, 0xa1eeb5d2, 0xa8dc50f4, 0x5a579cb0,
-	0xfea03237, 0xd2ebf22f, 0x8df953b5, 0xf4bd7d28, 0x73f45f77, 0xa67f8757,
-	0x35734eb6, 0x4c3d9e7a, 0xe5b9c3ee, 0xbc45f629, 0xf8ec53ff, 0x5a39cdbd,
-	0xf3329cf9, 0x72f5cef7, 0xd5fbf275, 0x9fb827d8, 0x58eaf584, 0xcbf6936b,
-	0x57ad97ed, 0x1d02e432, 0x9d9ac58e, 0x6f66a172, 0xcbc9a45c, 0x8d8b5eb4,
-	0x71f8b5eb, 0xcfa55eb9, 0xbc17f5be, 0xd3f34653, 0xef93a3de, 0xecb4940a,
-	0xb39b75e0, 0x852d9d66, 0x5864fdea, 0xa8fe298a, 0x05cf36b4, 0x35dcfd3b,
-	0x07e06d1b, 0xf126193f, 0xf3f74a16, 0x1d62f8b5, 0x148f38af, 0xaf473f83,
-	0x83b83e0f, 0x5975b9c6, 0x77f1b478, 0x3d1a02ed, 0xc6c6d697, 0xdad2bc61,
-	0x7fa17be2, 0xe840e7e9, 0x2e113bfe, 0xf50945f7, 0x6279fd87, 0x55ef878c,
-	0x377ed7cf, 0x43feb42f, 0xdafddd1a, 0x4cbfdf26, 0x92796c8a, 0x226a3be3,
-	0xe913e03c, 0x8c01ade9, 0xdc067a0b, 0x2f7c8b76, 0xf5b2bd33, 0xa241c073,
-	0x20f5c73c, 0x105b7bc5, 0xbf2813ed, 0x79ef22c9, 0xdd32aaa5, 0xa607e1a7,
-	0x5e8b9437, 0x5f1efcad, 0x2151bbe7, 0x9b176af4, 0x1fdde0d7, 0xefc12f7b,
-	0xa9f4e9a6, 0xa7d3a3f7, 0xcd3dbf4e, 0x9cf7d76f, 0xcd1489df, 0x49e592ce,
-	0x0bb8d076, 0xbfc41bee, 0xf35df16b, 0x35ef6bb4, 0x4c37ce76, 0x65c7defe,
-	0xfa974df3, 0x6df3cf52, 0x66e84c2e, 0xd4f3a1be, 0x431e89f7, 0x694fe9df,
-	0x1394fe92, 0xd4639d0a, 0x70b2c4ee, 0xe7d3ab8e, 0xbff5dba5, 0x8f87bdef,
-	0xf669c586, 0xc828d6aa, 0xdfb5f397, 0x99411151, 0x86a9f7c7, 0xaff9faef,
-	0xf3a75fbf, 0xdab593e9, 0xef5a28f9, 0x75167ec1, 0xf50f7c69, 0x2889d358,
-	0x627313bc, 0x6f4f848c, 0xde4dab77, 0x76511673, 0xbbcfde37, 0xfe3cd6e9,
-	0x8d8594bd, 0xbd9f587d, 0xf98d2ea9, 0x587e4dc2, 0x1ea74517, 0x83e348b0,
-	0xaf16b791, 0xd7f502be, 0xc2eff0a7, 0x4e7a742d, 0x43f6e7ad, 0x2313903d,
-	0x53daa79b, 0xfa961e59, 0xbb17ee82, 0x7c451155, 0x127c0d4f, 0x3fb2cbfb,
-	0xe2cfe71d, 0x983f52f5, 0xe06b1164, 0x50d81d3f, 0xf82fa134, 0xfc8ac3c4,
-	0xe60d9a3d, 0x0e86bcf7, 0x7c02fa2a, 0xbc5df426, 0x5e2d6d5b, 0xe482a7e8,
-	0x16d1d80e, 0x9e588b3a, 0x93e345bf, 0xf8db9ac7, 0xaf1d7ebd, 0x78bfe08f,
-	0x7ec42aa7, 0x1a276a14, 0xff07d9a8, 0x7b8faf1f, 0x0080003d, 0x00000000,
-	0x00088b1f, 0x00000000, 0x7cb5ff00, 0x65545c0b, 0xce7bf8da, 0xc0cc2b99,
-	0x1245c880, 0x85848b87, 0xd780c034, 0x508151da, 0xb9bba0bb, 0x658e21ba,
-	0x500665ca, 0xd7775ddb, 0xa6a18cfe, 0x45fa7d66, 0x80ed65a6, 0x76c36a97,
-	0xa8283448, 0x59990bc9, 0x6a37627f, 0x5b63b92f, 0xba402de6, 0x6dbfedfc,
-	0xbcf3cf7d, 0x511730e7, 0x6fbefddb, 0x797bf9fc, 0x9f5ef3df, 0xcfbcf3fb,
-	0x8c346339, 0x63181b75, 0x418e8b2a, 0x89486839, 0x8d8c9964, 0x615f6909,
-	0xf6c3894c, 0xc645db25, 0x7cfb4046, 0x1962c893, 0xfa31d72b, 0x1fbf8f7d,
-	0x3c1f7631, 0x42f3c337, 0x07d634a9, 0xcc37d7fd, 0xd6c972a0, 0xf1ae6dc2,
-	0x2509258c, 0x606393b1, 0xb66ae3c0, 0xce258a07, 0x2b307719, 0x8da4d3cc,
-	0x73c325d2, 0xc7292bb5, 0x496f9fe0, 0x0c4943e3, 0xd4699dc6, 0x7b4377cf,
-	0x414e6981, 0xba5f8c14, 0x325b2a33, 0x6f5dfbfb, 0xc91b1811, 0x4673a558,
-	0xcc614b1c, 0x67e1ddf1, 0x1fb0a94c, 0xf304d398, 0x7709e57f, 0xa38ba0bb,
-	0x82492dae, 0xb3aa3c23, 0x7fa058a7, 0x6f31d895, 0x4e73cc12, 0xa04def70,
-	0x5338e6fe, 0xe5a1fac0, 0xccc63ae9, 0xff398ce9, 0xcf3487cf, 0x3b89e2e7,
-	0x8778c016, 0xce047f73, 0x1ff8f553, 0x6c3201f2, 0xb2cf689d, 0x8dbce1e4,
-	0x1c124d7b, 0x56637b74, 0xbee39c09, 0xda46c7c7, 0xf79f2f33, 0xa8b668b6,
-	0xdbcbda04, 0x6957c118, 0xd48ee85f, 0x5eeddc20, 0x696131a6, 0x28689a62,
-	0x956c48cf, 0x52dbca07, 0x06b9a2d8, 0xe10dbb7f, 0x899eeb00, 0x025492dc,
-	0x9f7b15ed, 0x79433248, 0xa5ebc8d6, 0x9c7a7f7b, 0xddff4045, 0xd5e20d5a,
-	0x0b1a62ae, 0x25d7bb8c, 0xb250dcd8, 0x12c668f2, 0x7d6ea310, 0x59b19199,
-	0xaf9a7096, 0x630e7b62, 0xc17dfeb9, 0xab3f6a73, 0x8fb8c562, 0xd903f531,
-	0x8bfca1cb, 0xe21f7bca, 0x7ab52ff3, 0xf1192b8b, 0xfcbc2662, 0x84548b65,
-	0x05fbaeed, 0xfac05636, 0xac1a637e, 0x6ac9165f, 0xf4a17c71, 0xcf049b57,
-	0xb2101c57, 0x787b30b5, 0x1ee6b766, 0xd1169103, 0xd389b559, 0x75768ad9,
-	0x7fe02251, 0x2d408b45, 0x3357950e, 0x2f2abe1c, 0x80e6664d, 0xb6b656fd,
-	0x8eb0cc68, 0x09ce19a3, 0x539e1dfd, 0x5e78a59a, 0x7cb185b6, 0x89fe27c0,
-	0xa53e6bf8, 0x3f0037b9, 0x2e1cadd5, 0xbede56ce, 0x3b900338, 0x1362b699,
-	0x26dea0d2, 0x6b3ebd50, 0xaa35fcc2, 0xfcfe7ac0, 0x9a586935, 0x354c4e08,
-	0xf0025490, 0xa3d194dc, 0xd73bfc41, 0x5d42f3ca, 0x0d5eb01d, 0xde48e512,
-	0xf1c06a9e, 0x3caf1a66, 0xd146b677, 0x6c33af78, 0x3609bb03, 0x61506d51,
-	0x4434ef59, 0x56b3b960, 0x715950cc, 0x09166173, 0x1611dfe0, 0x6122c591,
-	0x3d5eaaca, 0x3b501240, 0xf6845870, 0x83fb48dc, 0x0c719f48, 0x33e802b8,
-	0x06057991, 0xf9dfdff4, 0x7fce2e59, 0x17df18cb, 0x5eaeb60c, 0x017e7d33,
-	0x8b26c3d0, 0x5f4c8e7c, 0xc8f1d22e, 0xb0af4043, 0x6cd5a7bf, 0xcf073e83,
-	0x42e6c257, 0x08c2cc3b, 0xb984dfcf, 0xafdfc0f7, 0xce226f31, 0x54de74cf,
-	0xcc9af71c, 0xc35a25a7, 0xf5f60106, 0x63fb149b, 0x053b8fb8, 0x116cf8f5,
-	0xc58d2071, 0xfe6afd7e, 0xc2796d9c, 0x4ffc03a6, 0xa367e8e7, 0x4062e645,
-	0xf1519aa2, 0xc163a406, 0x60ab6366, 0x0f3307fd, 0x2e80cbdd, 0x31d01e1e,
-	0x5eaf9c2d, 0x7d3dcfcf, 0x0094ec20, 0x2a8f46fd, 0xf4165916, 0x2958ab37,
-	0x29943ff4, 0x9fd8557a, 0x9fd8dce9, 0xbe6d0ae9, 0x8196590c, 0x7a88d0fc,
-	0x78eff51b, 0xca011bf3, 0xe1e2e944, 0xe2573848, 0x3d4b052f, 0x3c1b29f4,
-	0x85fff4fd, 0x5352f4b2, 0xfca1efcb, 0x19bda475, 0xb0727751, 0x501d94f8,
-	0xa3c9b0f6, 0xf9f264b3, 0xf1dff702, 0xa2226fab, 0xfabeff45, 0x7bef4e07,
-	0xcea58ad9, 0xe9b8c022, 0x9b57921d, 0xfa7ef975, 0xa9e361e3, 0x39e18fd4,
-	0x5ba20dfb, 0xe1ffb010, 0xd37f710f, 0x14af0675, 0x17d4e381, 0x38ff3a7c,
-	0x751d1e66, 0x284646fa, 0xb1913ef8, 0x8c3cdc58, 0x7068b81f, 0x6fb9c137,
-	0xa14ff991, 0x488b1eaf, 0xf191e9f8, 0xe991c0a4, 0x7e9122b2, 0x5e8ad5eb,
-	0x4cb385f0, 0xe8d67f3f, 0x5e0cff38, 0xff386d12, 0xcdd6b960, 0x8ec18a60,
-	0x5727d254, 0x007fa792, 0xd740ca79, 0xfb6a97bc, 0xf90fc233, 0x78fc074a,
-	0xc02f0c97, 0x25f9c33f, 0x64bbfe79, 0x1065ddb8, 0x127e9c39, 0x6e992702,
-	0xf650ba14, 0x5863982f, 0x9f1fb469, 0x47ddd7ec, 0x8f099323, 0xe383ffe3,
-	0xdfc213ef, 0x01d62737, 0xff51b11b, 0xfc784598, 0x579fc05f, 0xf80bfeb4,
-	0x9fc50eeb, 0xe23d7f57, 0xd2d171ef, 0x0880fc84, 0x26d2a1c8, 0x0658f9c2,
-	0x932ffe23, 0xe09b2cc2, 0xffe4767c, 0x8fef889b, 0xfc2bdf22, 0x37d8a63e,
-	0x49e4f51e, 0x7dc19ec6, 0xb50f44f9, 0x10a766a7, 0xbac75f9f, 0xf01db013,
-	0xf117379c, 0xe876d82e, 0xfb7d2c24, 0x5df5865e, 0x1ecb0615, 0x5bbf6f38,
-	0xfe61a974, 0x8ef72886, 0xc36eb0a5, 0x1716995d, 0xd59633b6, 0x3ca07286,
-	0xbe7a82cc, 0x85cb8a21, 0xa4e90586, 0x277e0f87, 0x73c2ad25, 0x34b3082c,
-	0x6c86ff41, 0xa01323df, 0x6cd630de, 0x57d74171, 0x1dbe9605, 0xd1d1cfc7,
-	0x38730d3a, 0x323c36dd, 0x057a8dda, 0x7af3cff4, 0x1e593fa8, 0x0d9cf0c6,
-	0x6884b68d, 0x2297cba0, 0x61b3a3ec, 0x4e24a3ff, 0xd0c90dd7, 0xa136e50e,
-	0x387dc164, 0x6fbe78df, 0x17b082df, 0xfa2cc2f7, 0xd0591034, 0xb195727e,
-	0x42a5e509, 0x73a57797, 0x75c63779, 0xc9c2076a, 0xd4659d35, 0x937ffcc2,
-	0xbb814be9, 0x556c6360, 0x0afe1fb4, 0x70c8c59d, 0x7a735617, 0xe5974d73,
-	0xd7733562, 0xe65f080b, 0x96f8070b, 0x42414169, 0xadd93469, 0xe5faefb8,
-	0xf7091780, 0x527fe1cf, 0x619ee564, 0x2847e7f8, 0x4c88f32c, 0x328fe404,
-	0x0ca3f9c6, 0x6fe908e9, 0x0051d015, 0x75df31fd, 0x65c3a751, 0x6bf1823a,
-	0x70d3258d, 0x3f85cfbd, 0x89e363e4, 0x87f34a7f, 0x3656675b, 0xf40b0397,
-	0x9fd899f6, 0x51148eed, 0xf130ae5f, 0x7f644ef5, 0xc5f51a36, 0x79bd5fc9,
-	0x23c7961d, 0x86cb6e4a, 0x7c16dbfe, 0xfce2845d, 0x353e096f, 0x0b6fe39e,
-	0xb468fffe, 0xbf56ca43, 0x43fef449, 0x192859f7, 0xaf4e5032, 0x15a67d04,
-	0xb074e4b0, 0x74463ef2, 0x896ac890, 0xfd65e36e, 0x47a30c05, 0x00f37539,
-	0xbcca8ed8, 0x9747fff0, 0xce896c74, 0xa2c69f5f, 0x7433ea82, 0x0bfd4109,
-	0xcf41c94d, 0x171f8d6f, 0x39a67cf4, 0x3b3ea83b, 0xff505263, 0x82d32ddb,
-	0x9c4e77ea, 0x8e7fd419, 0xdd504e6d, 0x1f244cc6, 0x738aea3a, 0xe1bb013f,
-	0xdc92bab5, 0xe397544f, 0xd0f6aa63, 0xe805b37e, 0x5f3bdb24, 0x91ea0935,
-	0x43265687, 0x11cb537d, 0xf43c4f5e, 0x66e03245, 0xf9d1cb73, 0x53dbd02a,
-	0x45f43c6f, 0x6d1fd40a, 0xa7cfe2e9, 0x40a362c0, 0x39bcb6ac, 0x9af805df,
-	0x8adf629b, 0xa9779af8, 0xf98a28f6, 0xbdccd7f7, 0xb942592f, 0x06746730,
-	0xc53727ec, 0xbf3e10fe, 0x759ef62b, 0x1ffb0091, 0x46ab5b7d, 0x5d98bf3c,
-	0xa1e915b2, 0xf3a722ff, 0x91978853, 0x96097eff, 0x8a61d903, 0x3c92bd9c,
-	0x03adf854, 0x1512c6f4, 0xa54749c2, 0xe544ceb7, 0x2a78baa1, 0xd999d48f,
-	0x57638012, 0xc795065d, 0x7ed42cea, 0x95226ebc, 0x546cea27, 0x4c575bbe,
-	0x095d7765, 0xb2ff0a95, 0x6a0d96bd, 0x2a974224, 0x4fceb4ea, 0x63d2578f,
-	0x69d92820, 0xf9d09f05, 0x39adbd4d, 0x9d75ce9b, 0x6959e909, 0x81f9da3f,
-	0x9dfa0459, 0x3d11d56a, 0x9b74354f, 0x475e5675, 0x22fbb8b9, 0xbc118af3,
-	0x5fb02a9f, 0xfd1b278c, 0x030ea998, 0x841b4bf5, 0xefd8597e, 0xf79404cd,
-	0x16356b53, 0x509e63b4, 0xf61e9733, 0x90df146f, 0x20e31d70, 0x05d86cca,
-	0x903ad518, 0x6ba07157, 0x63f439f1, 0x0f77283a, 0x4746f5f2, 0xf9472ed7,
-	0x60ccba34, 0x95f2e7a9, 0x08e24be4, 0x2fee026f, 0xda86a571, 0x198f628d,
-	0x9d5f60e5, 0x69d21677, 0x0ae72c81, 0x30ef5c34, 0x80bde411, 0x576dfb7c,
-	0xedf3da22, 0xd02f9edc, 0xfa44ec96, 0xfe7156ae, 0xf77a3165, 0xd5475c1e,
-	0xf42cf15d, 0xb44d89eb, 0xc568426c, 0x6069641f, 0x14d617b7, 0xeddca267,
-	0xaf885b61, 0x13fd5ec1, 0x338fdbd2, 0x9945df81, 0xf89e6048, 0x4da6f0e2,
-	0xd7adda02, 0xce5d21e7, 0x300f9ad5, 0xf65f07e0, 0xdcfbd100, 0x7a1e7348,
-	0xafecbe0a, 0x7cce3d79, 0x26e78040, 0x00bf3036, 0xe9cf55ea, 0xf0049f4d,
-	0x1513d3a9, 0x4b69af54, 0xc0127d30, 0x07f855a7, 0x09b747fa, 0x0ebb942a,
-	0x04a72b79, 0xb7c405fb, 0x0d73f8b3, 0x0680dfdf, 0xd98bd8ed, 0xb06fa266,
-	0x0fef4997, 0x9bba34cc, 0x2371bf60, 0xa057b36a, 0xce6994fd, 0xea497ec3,
-	0x63f40881, 0x1555bffa, 0x19efc9bb, 0x78c9f888, 0xd33d7d3f, 0x287b5121,
-	0x70e6b5dd, 0xcd26af7f, 0x50f119b0, 0x51d3af1d, 0x88b171d9, 0x92569d91,
-	0x4db97686, 0xd0cbfdc3, 0xb8737bf1, 0xaf5e491e, 0xa240b921, 0x0b6cb608,
-	0xc5dd4a63, 0xf8d63226, 0xbf21b08b, 0x34c9c007, 0xc83f6563, 0x41476235,
-	0x1b7f505a, 0x8e7a1ff6, 0x8ff31cf6, 0xbb49794f, 0x5e4aad63, 0x2965e90f,
-	0x183fa373, 0x72abc72a, 0xc0b965a3, 0x8c74fcf1, 0x9cf111be, 0xe77d0126,
-	0x504cc950, 0xb2338626, 0xd75f1337, 0x773e91bb, 0xa7fd39eb, 0x2ddcbc89,
-	0x309afef2, 0x577a42e6, 0xb94d87fc, 0x79b929f6, 0xe6978f34, 0x91b25a91,
-	0x879813ae, 0x24ec57d6, 0x43d81fa5, 0xaa02127a, 0xd7c47481, 0x161c4954,
-	0xa672279e, 0x448ce515, 0x4fb1b0fe, 0x5f77e403, 0x40aac478, 0x78e355fc,
-	0xe9b8e043, 0xef194e34, 0x4fb2255c, 0x245c9047, 0x89a6723a, 0x4b562fe4,
-	0xfe8088ec, 0xa0d6eb16, 0xf5c6539e, 0x14fc1c82, 0x9047f0f0, 0x087e588b,
-	0xffd710f2, 0x2c43c833, 0x10f20aff, 0x3c824fdb, 0xf207d2c4, 0x063fdb10,
-	0xbce58879, 0xe4568dbb, 0x69b69a9f, 0x7e20d3ec, 0x017ddb50, 0xc369def5,
-	0xa64391d3, 0xe1e4dea3, 0xe1cbaf9f, 0x2def457e, 0xa0fd9f1c, 0x00ffd1bf,
-	0x8a6b5cba, 0xef1eb2be, 0x1ef9b237, 0x7cb6d380, 0x27f4876e, 0x1cd2faf0,
-	0x226dd535, 0xb7e38edb, 0xfaf86be5, 0x3e396229, 0x79f345b7, 0xb245d37b,
-	0x9e4ea69f, 0x9e0724b6, 0x3da162db, 0xbdef5fc7, 0x8db73f81, 0x7a43ede2,
-	0x253e7e56, 0xeff8a4d7, 0x652fdce9, 0xbd012764, 0xff4afcd3, 0x3e7226f7,
-	0x4eefed0c, 0xc3dd8b13, 0x992de3c0, 0xd02f896f, 0x483e469e, 0x6a8be00e,
-	0x4285f133, 0x55fd0a87, 0xa73872e5, 0x073a6569, 0x43f042dd, 0x3a72831d,
-	0x25f64f4e, 0xe0c6c5c0, 0x9905bb3c, 0x01f9425f, 0x0a07d44a, 0xa07c283f,
-	0xf0227bd0, 0x3fed1099, 0xf421cdc7, 0xca8f94aa, 0x358ee8e7, 0xdaf09cfe,
-	0xdfa136a1, 0x87cc3377, 0xc1c513e3, 0xfe46ef77, 0xd19a358c, 0xc87c2cf5,
-	0x1c9c3b50, 0xc2effaeb, 0x570b9143, 0x7065c780, 0x5ff2f0d0, 0x39c90385,
-	0xbf48e394, 0xfdadc8c3, 0x5db2d139, 0x44f7e9ce, 0xd21f6d8e, 0x57a0bf51,
-	0xafd0dfa1, 0xd9dac367, 0x7f39f2db, 0x05547428, 0x89eb103a, 0xcbd4ce78,
-	0x9e729ee5, 0x632e73a1, 0xc2d2ff24, 0x9e287b78, 0xc8057395, 0x0139c3bf,
-	0xb8c61ff1, 0xd81d717d, 0x4d4fe817, 0x3ed335c9, 0x567e47fa, 0xcff995b6,
-	0x6f0e477f, 0x88944a7f, 0x32fd141e, 0x8b482ed4, 0xe90664e6, 0x3f42661d,
-	0xfc4b53af, 0xe67f05ee, 0x3e871825, 0x3fe49b21, 0x71e320bf, 0x1158fe70,
-	0xafbebbed, 0x63d42e0d, 0x4e06a37d, 0x6fbe300a, 0x6436183b, 0x136ed897,
-	0x07deef40, 0xd4f5063a, 0x2c7b9005, 0x7273b19d, 0x73cfa11c, 0x73fa24f1,
-	0xa6243b35, 0x3b4a5003, 0xf4879abe, 0x6d53b4b4, 0xf6d0b8a2, 0x3d218ec7,
-	0xcc156e9e, 0xb5f49768, 0xbfa1f1c2, 0xd6e8c1b3, 0xa822ff43, 0x0665ff63,
-	0xd7ccdb8d, 0x4383f8a3, 0x7d53ef5e, 0x85c60a75, 0x1350ec66, 0x2f3e97dc,
-	0x3b3ed1b9, 0x0aa57dbc, 0x02dda7eb, 0x4571838b, 0x04aeead2, 0x2d3e57a8,
-	0xce30b458, 0x8b3a2861, 0xe7ca82f1, 0xf30bc599, 0xc918b657, 0xa0da5dcf,
-	0x6017d8fe, 0xb7bb945f, 0x29eed06a, 0x5edc19df, 0x0eb83bb9, 0xeff922f8,
-	0x00f68668, 0x8e6dfcf9, 0xcdec8631, 0xed1b2c71, 0xe3c0d64d, 0xbf7c8ab9,
-	0x71756edc, 0xcb82ba39, 0x8cbec66d, 0xea5f7f45, 0x63e92afc, 0x91cfaf03,
-	0xfea0a7eb, 0x2f1c57f9, 0xe5aa5c0a, 0x604f3fb5, 0xb79c0f56, 0x426f53ba,
-	0xfdbabfff, 0xb71811ef, 0x51f309af, 0x22bd9f7c, 0xdbded099, 0x10b926d8,
-	0xfd0ecebe, 0x56e0112e, 0x8d3de07d, 0x5f7088d9, 0xadcaf64e, 0xe31eb5cc,
-	0x64515edc, 0xdd4744dd, 0xb666a714, 0x4f38a581, 0x84debb5f, 0x2bf54076,
-	0x8ddd741f, 0xd30203f5, 0xfb471e23, 0xee964e88, 0x2da58640, 0xfbe426dd,
-	0xbc4244e9, 0x913d9e22, 0x8865af84, 0xe033c477, 0x212cf11d, 0x51bc713e,
-	0x2274e6e3, 0x73f4fd51, 0xde0abf1c, 0x1acda48b, 0xe46caf6c, 0x63b19e78,
-	0xa230b6cf, 0xe9933503, 0x7a7ef080, 0xa6bbc727, 0x14669d73, 0x08636fd2,
-	0x876bb41d, 0x77f700e8, 0xe0841d19, 0x8df002bf, 0x0e942072, 0x93dff142,
-	0xd806e5c3, 0x429fa7df, 0x7e08dbfb, 0x23c7f301, 0x1ef55646, 0xcaf5818d,
-	0x973bcfa2, 0xf8d8fb43, 0x08da5897, 0xe4157f8a, 0xe66bfc62, 0x5d10eb3b,
-	0xc85eb33d, 0x57a97a46, 0x813cf6fb, 0x70a88b71, 0x27f4e38a, 0x32f9d9cf,
-	0xfa20bb9c, 0xd816a49b, 0x5a6bcd7f, 0xc928deba, 0x35ec8715, 0xf129978c,
-	0xc533c074, 0x5a1d9cc9, 0x2d6b171e, 0x73fa05b4, 0x5cfc09fd, 0xb2819a85,
-	0xc017e8e5, 0x608eb87c, 0x555e7ee3, 0x28178f07, 0x1295597e, 0x8e0e6837,
-	0x77a6081b, 0x2e455fa8, 0xc6a55f8f, 0x3b466cdd, 0xb3017ebc, 0x4d5ea587,
-	0xcc78f03f, 0x74dfb2d3, 0x0af1fb45, 0x1bb1427a, 0x6e382b99, 0x65a9c8a1,
-	0x8f1ef913, 0x6ab8e2fe, 0x76fdc604, 0x8a8f840b, 0x704f900e, 0xdab70ade,
-	0xf802166d, 0x19ffee49, 0xedc01bd2, 0xa0f6ab8c, 0x19dd2128, 0x990ebf68,
-	0x8e91ab3e, 0xd695bce0, 0x9cf02237, 0x38ae590e, 0x7f148dda, 0x8a5b64ab,
-	0x612aee90, 0xf430ef3d, 0x0b5cf954, 0xa2d729f9, 0xaccec527, 0xb7ee0d6e,
-	0xce487731, 0xe01eff8c, 0x396401bb, 0x992e7bd7, 0xf12332fe, 0x99906fde,
-	0x879f9123, 0xedc09ff4, 0x5cfe4537, 0x3c581dbf, 0x6e71de60, 0xac05531d,
-	0xa673e37f, 0x4f78faa0, 0x9bff507c, 0xcf41ccda, 0x4119bdb3, 0x598f73cf,
-	0xdd79ea82, 0x4ffa8313, 0x5416d0f8, 0x0e2be49f, 0x4ce53fea, 0x307d5049,
-	0x9573ce13, 0xe35bc1fb, 0x33fea085, 0xf9a0facd, 0x05446767, 0x320d07d5,
-	0x52bb647c, 0xce5f77b1, 0x686ef6e5, 0x76f7c0a9, 0x8a3af04b, 0xc4e77ebf,
-	0xd8e6f5e0, 0xa1fbd782, 0xfa0bd978, 0xc27e0554, 0xb15fa073, 0x13f81dfc,
-	0x9a13f02a, 0xfac09fc1, 0x604fe08b, 0x027f01e9, 0x7f025fdb, 0xe0adeb02,
-	0x20fd604f, 0x6f583ff8, 0xf2a62bab, 0x6a12ba95, 0xbafc16bf, 0xc98f75e4,
-	0xd7971eeb, 0x74e177fd, 0x5def9e42, 0x9c6ebe79, 0xdcffcd2f, 0xbc563c59,
-	0x2d3cfc04, 0x87c6acfa, 0x5f0ac37e, 0x062dc611, 0xc61892de, 0x7ddd99a5,
-	0xf5062eac, 0x338a08d9, 0xb78192b3, 0x7d52ae31, 0xc9b4d520, 0x0fecfa8c,
-	0xbef3e2ef, 0x7c8cc956, 0xefeda879, 0x85cf3811, 0x5f74614b, 0xef107a4a,
-	0x5461bf1b, 0x31cf04df, 0x05b33a0e, 0x37e90804, 0x0bb7e90f, 0x4ddd4a69,
-	0xcd25bdf7, 0x53c41a2d, 0x3c29f215, 0x0ea3cb7f, 0x635cfe7e, 0xf61373d0,
-	0xe54ab287, 0xb9c238a6, 0x2f3e6536, 0xf1a477f5, 0xcf73cf7b, 0x053f5e1d,
-	0xe2cb6ff5, 0x5e7f7811, 0xec5efcd5, 0xc7c157bd, 0xc85f07e7, 0x76cafba4,
-	0x9fe0cf98, 0x96aed9cf, 0x8eff7ceb, 0x68a296b4, 0x02cd1c54, 0x05c50b1b,
-	0x5fee85b6, 0x38f6daaa, 0x65556e50, 0x0066addc, 0x248f7e9f, 0xbdf837c7,
-	0xb8c4c391, 0x22f9e71d, 0x5f57ef02, 0xc3bd1cf7, 0x38edf886, 0xf6eb811c,
-	0xfe414ab7, 0xb72b68d3, 0x355b478f, 0xad0bbf84, 0x5ef02387, 0x30e7a377,
-	0x4bcabb87, 0xd7243fe7, 0x7824a1fb, 0xfe7449b7, 0xd0624b8a, 0x5586763d,
-	0xb66679a2, 0xb9e2358d, 0xbd7c3c7a, 0xb799ab1c, 0x825e2da7, 0xbf1e3ffb,
-	0x7b224f20, 0xca350410, 0xef661bf1, 0xcaa43b41, 0xf386d923, 0x79e40aef,
-	0x4e9cd4bb, 0xdfdb4adf, 0x78f8f285, 0xd26c88f1, 0x699f8a11, 0x916f76e5,
-	0x7a869ec6, 0x3660c7a4, 0x583f9d22, 0xfc446a9c, 0xdb12c21e, 0xec69778b,
-	0xe6c7bc06, 0xba98f5eb, 0x7aee9023, 0xb425735a, 0xf2f99477, 0xe88775e5,
-	0x2e6f087b, 0xbbb953c2, 0xf8f380d1, 0x73dbc7f1, 0x7fea26ac, 0x3cdefddc,
-	0x327aabb4, 0xe92ec9c2, 0xa7f230d2, 0x5db99aab, 0xd891d3dc, 0x924f7818,
-	0xf2fd9563, 0xdaf0910c, 0xfb96a6d7, 0x0587bddd, 0x39d353f5, 0xde0eec2f,
-	0xea7dc98f, 0x1dc7b451, 0xf50c4b4f, 0x1b5d43a2, 0x6cffe78b, 0xcafef067,
-	0xd43b3865, 0x00d8d8de, 0x0fb4757a, 0xe8818df1, 0x13e15dbc, 0xc153e133,
-	0xb7064f63, 0xf9e27ae7, 0x65a3a4bd, 0xe5f5d10f, 0x64eea4f1, 0x7f121ff4,
-	0xe778a3a9, 0xc567fcb5, 0xaff0086e, 0xea8bfa18, 0x313cd4e2, 0xbc1f6fc5,
-	0xb6ab6b96, 0xabbf448e, 0x1ecafc84, 0xac2cf606, 0x3a7b44e9, 0xb61ff292,
-	0xad83bae1, 0x76bfba6a, 0x7d66daea, 0xa0d97602, 0xf6051805, 0x2d53b83d,
-	0x0cd97bdf, 0x952ed768, 0xcccfdaed, 0xf4097cf6, 0x488d73af, 0x866473e7,
-	0x27d31f91, 0x5bcfbdcb, 0xbb24ef92, 0x426498e1, 0x8786687f, 0x668ec1db,
-	0x7b56d76e, 0x2a63ff92, 0x6acdedda, 0x8a60d4cc, 0xed94e21d, 0xddb2d390,
-	0x80cd7a7b, 0x4e9bfc86, 0x8c963d81, 0xbb5b2a79, 0x33b9e112, 0xb3d91673,
-	0xec99a94e, 0x83db6589, 0x6fb007ed, 0xcf55ea82, 0x7217da85, 0xdc13cb7c,
-	0xdb87f8ae, 0xc67643ac, 0x0a67f438, 0xc871a9a5, 0x78c82f0f, 0x959bfc55,
-	0xb7942de3, 0x9e6551b3, 0x1021c4a5, 0xfb9d355e, 0x6edf702b, 0xfc859847,
-	0x10af558d, 0xe4bffb5c, 0x3c7f4c7e, 0x33f47823, 0x36fedf0e, 0x6a35e74e,
-	0x48f98dc1, 0x34b64035, 0xaf704e9f, 0x6bb338c1, 0x13e48230, 0x17c8c563,
-	0x7f70162b, 0x5f3186d5, 0x7e156b28, 0xb7abd108, 0x54527ca8, 0xb3689c80,
-	0x02bf50a6, 0x3ea3b30d, 0x90b4695b, 0xe3a31b7e, 0x6ae17a76, 0xc3d2364f,
-	0xb5c7f018, 0x31f8f101, 0xfb010186, 0xc7807eed, 0xc27895ff, 0x1d49951c,
-	0x191fa015, 0x95fd435b, 0xf0a241f9, 0xdf9ad7f1, 0xfc1bf304, 0x23bc03f3,
-	0x585fde11, 0x93b7a42d, 0xfff728e6, 0xca97c4b5, 0xbd002e79, 0x63181c61,
-	0xc7378834, 0x9fc837ce, 0xf5eeb273, 0x8228ae38, 0xf708a3ef, 0x5e30f583,
-	0xe79651fe, 0xbcbc79b1, 0xf9152e4d, 0x7b6790d5, 0x95f50adf, 0x593ff679,
-	0x8899ae49, 0xb4ca573e, 0x9c4cf602, 0xbbf9186f, 0xf0891de2, 0x03f005fa,
-	0x5ac2fbf2, 0x64169cc1, 0xaf3a712f, 0x3cec4de1, 0x454ef4f3, 0xdd6cb838,
-	0xc6d79819, 0x5a2d7f38, 0x05a737a5, 0xbd2007de, 0x0251ffa3, 0x2fd1f2ff,
-	0x5372bfe3, 0x57946dc5, 0x8cd62ab5, 0xc83517f7, 0xa6d7290f, 0x87ba50ff,
-	0xb7a44edf, 0xa0b5a66a, 0x0b69a97e, 0xa1516e7d, 0x084dfe3d, 0x74c9245f,
-	0xe81768da, 0x5bf1bd7e, 0x95a38f15, 0xbb37140a, 0x4e911a0b, 0xcafd87e9,
-	0x7e71b9a7, 0xfba0b3cc, 0x391886ae, 0xee862bef, 0x9f227ee1, 0xf7952eff,
-	0xa3efe40d, 0xc6324f6a, 0xf93a8e71, 0xe602d53d, 0x52dd7ba1, 0x6f654dd6,
-	0x2f01f578, 0x8d1aee4d, 0x7607f87e, 0x1a91c52d, 0x511936d7, 0xb5b166ce,
-	0x031fbc26, 0xfbee7936, 0x1bdb2bdc, 0x9468f7a1, 0xc7e7959f, 0x92bccaf3,
-	0x83a03cf8, 0xf8a38033, 0x57c7cb9c, 0x02207fbd, 0xfefe7ee1, 0xca7ef3fd,
-	0xb9020fd0, 0xd654f305, 0xbdd064b6, 0x67758b8c, 0xabf1fbe4, 0x1fc153e0,
-	0xf08399b4, 0x0eb9670a, 0x0d9f33e0, 0xd36e63e4, 0xc0a9f0b5, 0xf03d4939,
-	0xe8250463, 0xa1439231, 0x5ee05678, 0x3cd56acd, 0xeefb56fe, 0xb3ffe802,
-	0xed19a2b5, 0x7ef0cbca, 0xf578fc0d, 0x28d791fc, 0x257b3f90, 0x5a78297c,
-	0xff54bcc8, 0xfb8f8a30, 0xf144a170, 0x7c69ffc3, 0x4bd9e435, 0xb7c2aef2,
-	0x257a7ca1, 0x2ab45cbe, 0xf8437f84, 0x2d2f8874, 0x7f002ff0, 0xc41155f6,
-	0x1d7e0a8f, 0x5193f066, 0x2d1875ff, 0x3e39766e, 0xfdc5dfd1, 0xec0ab654,
-	0xf087e149, 0xe3fc8fab, 0xad017c50, 0x541f50d8, 0xa9f305e7, 0xc92bc782,
-	0x7dee452d, 0x4d47bcc4, 0x7067dd02, 0x9685fe3e, 0xfb94e9f2, 0xe2dee50c,
-	0x6fae3cd1, 0xc08fcb42, 0xa27bc16e, 0x233d194d, 0xd5ebded1, 0x7bf0f328,
-	0x74d68fd7, 0xcd7cc68f, 0xb2f1a68f, 0x4cf3c357, 0x8c2dba94, 0x4a3f03c7,
-	0x6e10bad0, 0xa6e3091f, 0x91f01da3, 0x783bcbf0, 0xc6634e3d, 0xe9b882fa,
-	0xaaf7a826, 0x83e1f895, 0x5376fcb2, 0x0982d1f9, 0x604fd405, 0x661e1047,
-	0x3ad09581, 0x0c5d1082, 0xe7e8f9fb, 0x5ef07363, 0x03ff3940, 0xf48e3c79,
-	0x431cf91b, 0x095ff6f1, 0x045f6f14, 0xf784c3aa, 0x289fd302, 0x93f6814e,
-	0xa6cd4ebf, 0xc115cafb, 0x4dfea3eb, 0x56e538a6, 0x4b96e79a, 0x99c5ea03,
-	0xe90d7dfe, 0xbc8b82cd, 0xa0d8c97d, 0xf45b667c, 0xbb27ee38, 0x8f512353,
-	0xf06d7a29, 0x60437ed8, 0x1cacf51c, 0x8faa1e77, 0x5029247b, 0xf7b1be2f,
-	0xa79c74e1, 0xb2cae35c, 0xf98f3018, 0x1fb424a9, 0x943ef7ca, 0xdeed764e,
-	0x9fe8e98d, 0x9c3d3794, 0xb87aa36e, 0x1523fc9d, 0x7df9f73f, 0x0a6d7693,
-	0x9d6fa3b0, 0x52fbedc0, 0x68851bdd, 0xf1bacedf, 0xb71875f3, 0x816bfb1f,
-	0x590b70e2, 0xb7d43af7, 0xaf9c1965, 0xe48e8358, 0xf747cc3f, 0xddc67ba4,
-	0xfee51bbe, 0xabbf8cf1, 0xcdfea097, 0x657cd153, 0x0e39bdcc, 0x041b6fe3,
-	0xfbf9bf8a, 0xd77ba68f, 0x4d056bc5, 0x51ea0c7c, 0xc7fd779e, 0xe38228bc,
-	0xbbb21b3d, 0x356cbdb0, 0x75a59f6f, 0x3ce0f6b7, 0xcf28684f, 0x4a65140a,
-	0xf63dc049, 0x3df8f31f, 0x72cda2dd, 0xcebcb1be, 0x8db16dd8, 0xa3fce781,
-	0xfe567f8c, 0x3b83c901, 0xb6dcbc65, 0xf123bdfa, 0xdaa46f30, 0x2b9467fe,
-	0x3a7e3eef, 0x4159e50d, 0xa44cd9f4, 0xfb1ab1f3, 0xee781593, 0x2bc52d26,
-	0x528959ad, 0xb9cff41c, 0x5863da7f, 0xf8bd5a2e, 0xfb8c0ac9, 0x1f91d76e,
-	0x856feca6, 0x5fd11660, 0xd3f8dc3d, 0x676e107b, 0xa479e71e, 0x8faf1a2b,
-	0xe2fe5abb, 0x1f3c75b3, 0x1d3af9fc, 0x99d42f95, 0xb88e1998, 0xea9e2eaf,
-	0x5333afbf, 0xfa73e6c9, 0xaea6f252, 0xa5ee5f34, 0xb65bca30, 0x1e51d06e,
-	0xf6d6ae7d, 0x6bc01e55, 0xa6ce0dec, 0xc6b9f28d, 0x576cf8c2, 0x83840cf2,
-	0x2ef2e375, 0xe54f6134, 0xedeaff71, 0x64490d9e, 0xf53eaf87, 0xcf3c054c,
-	0x0ef92fcc, 0x5e76ebc7, 0xe1c178a4, 0x10ca87f6, 0x5a4de5de, 0xdcf93e7e,
-	0x8f4f1e67, 0xbce3127b, 0x7fc9a96f, 0xea79d9af, 0xde508d99, 0x26b979bb,
-	0xe87fde90, 0xf795bf79, 0xbabe2d73, 0x75fe1c12, 0x89387abe, 0xf809a7f8,
-	0xe7dff32a, 0x6bd59aab, 0xf3737e08, 0xc3e6c64b, 0x5da8cffe, 0x674fc849,
-	0x744cddc6, 0x0814eaee, 0x571c8afe, 0xf3e6a7c6, 0xd12ae8fb, 0x48ec99b3,
-	0x057f8e59, 0xf7c2239e, 0xd2cff68d, 0xaafe8ed1, 0xcf55c16d, 0x3d0eb07d,
-	0xe99b8c22, 0x9e7d0ca8, 0x62a7b1af, 0xc8be715e, 0xe7d0e7ed, 0x712be7b7,
-	0xc5b71e78, 0xa790109f, 0x458d84e2, 0x13fea346, 0x972061bc, 0x9eb76d9d,
-	0x06ffa155, 0xc1c7e17e, 0x38fb2876, 0x695faf40, 0xab2ad7bf, 0x5f951e71,
-	0x50f84eee, 0x3d00de64, 0xc617c93e, 0x0eeb01bc, 0xa6d02bf9, 0x049efba1,
-	0x37880b92, 0x6bea87cc, 0xf584d71f, 0xc78e1ab3, 0x97e083be, 0x930cb8f1,
-	0x3ce7fdf2, 0x0b3e7edb, 0x79e86ce5, 0x4f395fab, 0x7b68e1f4, 0xe740a2e8,
-	0x9556799f, 0xbff3ed75, 0x167cf7b1, 0xdaacefe2, 0x57fe8f97, 0x8597c69f,
-	0x957ea878, 0x157ff3cb, 0xc57b4a0e, 0x138f0d06, 0x23f2260a, 0x140ba50b,
-	0xc63be807, 0xedd500e3, 0x0e9e48bb, 0x4c78f076, 0x145dd88d, 0xda8bf187,
-	0xcf285d53, 0x5fb9e306, 0x28dbf306, 0xd65521cf, 0xa481aa83, 0x1ed72039,
-	0xee07a219, 0xfe419e0f, 0x1e3ce0d5, 0x6561e507, 0x2bb43385, 0x433f21ce,
-	0xe4aad97b, 0x67e748f5, 0x507323dc, 0xf59dbe3e, 0xdf8a6a8f, 0x926e1ebd,
-	0x30958ec8, 0x4e0878c7, 0x4b70e743, 0x2987d13c, 0xb3387176, 0xd1abf405,
-	0xbf24ef98, 0x9fbf38fa, 0xf381b9ab, 0xf3857b13, 0x1bed7393, 0xf980f89a,
-	0x93f3257e, 0x7ace4f62, 0x97c41ffd, 0x9edae70f, 0x470cbe40, 0xc5f38859,
-	0xb51e5247, 0x72871ef2, 0x90e8691f, 0x8962f8fd, 0x49b4d79e, 0x58e5ef0c,
-	0x0af291bc, 0xca16d98a, 0x3cc59cb7, 0x8f5e7953, 0xf029d1ef, 0x52ebf67c,
-	0x81a1e62e, 0xdbf74d3d, 0x34f66145, 0x15ead3cc, 0x1eae1905, 0x7d009ceb,
-	0xf73e7ef6, 0x024aa757, 0x8481b1e9, 0x6653b270, 0xe29677ce, 0x5a7e957e,
-	0x9833eb91, 0xe62cec87, 0x7bc2c81e, 0xc81de655, 0xa556fbc2, 0xc3d7bcdf,
-	0x322f496b, 0xc05e758f, 0x79f3a73a, 0xbc0bf3bc, 0x5279071f, 0x16c3df23,
-	0x436edf4a, 0x27456b7f, 0x15ec7fbf, 0x3cc03f93, 0x19c01733, 0xf01e7af1,
-	0x63fd436a, 0xf21b3667, 0x6e91f8cf, 0x7d9a9fe4, 0xbd7cc302, 0x136d76ea,
-	0xd5aa85c6, 0xe7a458be, 0x6bef6d8d, 0xf06b9e90, 0x8e3c765e, 0xdcbc7267,
-	0x35bf7944, 0xf5efc626, 0x00ffaeda, 0x63ce76e3, 0x553a8b5c, 0x003c51ef,
-	0x57ae36e5, 0xfe42dad5, 0xc97983bf, 0x073477ff, 0x3c60cdd3, 0xf287e78f,
-	0x737ce9c9, 0xdccc7f10, 0x1e63f9ce, 0x681b73e6, 0x675fc538, 0x5d91c7c6,
-	0xf1c71fe2, 0xafce9360, 0x3fa63b43, 0xfc7ca045, 0x5ad730fe, 0xe95c8fb4,
-	0x7fe9aedc, 0xbd2b05ed, 0x5b73a3f7, 0x3cf98c7f, 0x733bddb2, 0x149556c3,
-	0x1d999fb0, 0x1fd8de3c, 0x120fcac6, 0x21d7edde, 0x25b97c3e, 0xbe31f267,
-	0x777819a3, 0x4483c60a, 0x3d0d1f1e, 0x6b8e5d87, 0xfdfc671c, 0xb3df6528,
-	0x3cb91313, 0xa3a26e63, 0x5bbf392e, 0xc651d7c9, 0x504132df, 0x9fb8d1ee,
-	0xfaae5824, 0xd7de1a5e, 0xde2b9e60, 0x3bf960d7, 0xef161f39, 0xa2feb06b,
-	0xf78b0f9c, 0xf78ed835, 0x956f5835, 0xbef161f3, 0x5f78eb06, 0x722be583,
-	0xdc71ec3e, 0x6df1e52a, 0xa2e90a7c, 0x946d790b, 0x1d1bdebf, 0xdc151f52,
-	0x085a37bf, 0xa8128fae, 0xc6c269bf, 0x78ff30a7, 0xc52f9293, 0xc3b446cc,
-	0xfbf9c22a, 0x7b06a91a, 0xf3f404ec, 0x45ed778b, 0x9bf81e7f, 0x882b9fde,
-	0xef4a505e, 0x1968c497, 0x27dba3ca, 0x804f47d8, 0xcd8ec7f1, 0x724adb48,
-	0xecf74f52, 0x31bb3fbd, 0x6f7ae292, 0x25824c49, 0xaee465a7, 0x9a7d42b5,
-	0x85fa2041, 0x512a6ef9, 0x67984cfc, 0xab62c746, 0x1307cb8a, 0x9285cbda,
-	0xb3ae0963, 0x8b9f4122, 0xd588f872, 0x51fb819e, 0x6a345de0, 0x45da1a59,
-	0x07f36a5d, 0xbd759f18, 0x57e866a3, 0xa53c7129, 0x69d693df, 0x99bfb8f9,
-	0x736ba919, 0x36607e70, 0x0d367794, 0xd9fdc66b, 0x9ea170c4, 0x855997e4,
-	0x027f20f2, 0x66e99ba7, 0x357b1f6e, 0xfa345566, 0x62d361f5, 0x4bb75ef0,
-	0x1931f3c6, 0x3c65c7cf, 0x81573de3, 0x6173df8a, 0x585cf789, 0x2da3e686,
-	0x4db12fcf, 0x240f7820, 0xcdb3e605, 0x0097df92, 0xd4f7a10a, 0xf31c729c,
-	0x34ee594b, 0xcadc95e6, 0x9e6879c7, 0x778e392a, 0x6f7c1d5e, 0x8ff38ca8,
-	0xbdce5467, 0x166bcb89, 0xbf79e1a9, 0xe61731d7, 0x397dcf15, 0x7d50e281,
-	0x06a5d16e, 0x5e05cfbc, 0x5ec67947, 0x8b2efee6, 0x77337ce7, 0xabf51c7f,
-	0xcea9e397, 0x7c74eee8, 0xe64fa3af, 0xf07ea52f, 0xe4979e3b, 0x81ba81cc,
-	0xf3a123de, 0xa776e739, 0x4fbd4147, 0x5f488bd0, 0xbcfe26ce, 0x673fe647,
-	0x7c9f3c8a, 0x24f3a61e, 0x3bfa3e21, 0xf7c24e5f, 0xbc193710, 0xf7fcb94b,
-	0x66dc93a6, 0x6fcc74de, 0x4e782f3a, 0xadf1be62, 0x98a5296d, 0xed5e7f6f,
-	0xb3eb0679, 0x5d78d2db, 0x0a693968, 0x93d23e7c, 0xb7c8f984, 0x6296a5b6,
-	0x91f9f23e, 0x5944cf2d, 0x97eaea02, 0xcd73e24e, 0x98a56983, 0xeb5b3c9f,
-	0x7487563e, 0x5f4e7bf3, 0x4e077dfa, 0xdaaa7c23, 0x7d3efdb9, 0x2f0b81df,
-	0x603e7ea1, 0x7582bca4, 0xdf099213, 0x6ecfedf5, 0x6beb7a46, 0x6c3f1351,
-	0x99ff7e6a, 0x2d3f50df, 0x6b665985, 0xc90c563d, 0xba1db494, 0x3b35f71b,
-	0xd625f3dc, 0x89bc4f17, 0x047b31f6, 0x13a5ebe7, 0x4f914a73, 0xfbec0efb,
-	0xd9b3ea05, 0xe2d86091, 0x13d05e7e, 0x8ff72a7e, 0x40b8c02b, 0x0cbbb19f,
-	0x9dfeafe7, 0xec1fe796, 0x718e9b8f, 0xc09cff82, 0x6e2a31f3, 0xfa8492d8,
-	0xf9e57c56, 0xf8c1bfbd, 0x74f4efe6, 0xcd1353df, 0xa94abded, 0xe1397f31,
-	0xcc5ed76f, 0x5e7be95b, 0x15aff74f, 0xe2b39318, 0x2963ac7b, 0x3feaff3e,
-	0x78865eff, 0xee769428, 0x772ff6c5, 0x438445eb, 0x7916c68f, 0x8f61f233,
-	0x0acefc9a, 0x3bd15eb9, 0xdc27ef82, 0x8bf84457, 0xfa8492d9, 0xafc472b6,
-	0xcf7dc0ee, 0x833cb696, 0x567b0f7e, 0x670e774b, 0xc1b8079f, 0xd47bb3b8,
-	0xfb034998, 0x5e90aa30, 0xca5b0bce, 0xf7f9c49e, 0xf5e77ef0, 0xae9e085b,
-	0x5c33d73d, 0xd431fa0f, 0xad85e7c7, 0xf767ed41, 0x7e859b3c, 0xcddfb9e9,
-	0xa154ff26, 0x2a5f8573, 0xf4836b77, 0x58824922, 0x3fca5b8c, 0x02198b93,
-	0x0ee759e2, 0x927be8ee, 0x6b9fc7f9, 0x00357b56, 0x5b2d0aa3, 0x0acdf98b,
-	0xde26543f, 0xabe78c5a, 0xd1d31b14, 0xf5c8a97e, 0x9c5f2195, 0x3c5d33d5,
-	0xd65b7bf4, 0x6bad955b, 0x7c1da0e6, 0x45fcfda5, 0xc95f4796, 0x9b55f87c,
-	0xdf781dde, 0xb5fe5a18, 0xa84f998e, 0xb585f5fc, 0x95e5b25a, 0x78d6def9,
-	0x55afe81c, 0x71f97347, 0x8337fa12, 0xac93fb1c, 0x0aad16ef, 0x04eeffee,
-	0xad594f9e, 0xfea3a5f1, 0x7b7fe653, 0x87db8982, 0xca3a5f2a, 0xb371d0ab,
-	0xbcde5925, 0xa9bc9020, 0xd14e156c, 0xd20824fb, 0x2b3c3f58, 0xe6372e75,
-	0x87870d13, 0x0f197cf8, 0x70f1e612, 0xd66caabe, 0x4f30f4db, 0x022f9855,
-	0xd18725ed, 0x50768117, 0x6b122bdf, 0xa317d192, 0x5fe29fcc, 0x5653894f,
-	0xfd36d478, 0x71c1eb70, 0x865e4fd0, 0x5628037f, 0x537ce44f, 0xeb4e16de,
-	0x1f2f9331, 0x677cb6e9, 0xa73c38f0, 0xfb1f8029, 0x06c576da, 0xf70cebfa,
-	0xa751f74d, 0xfffa6f88, 0x07bd31f9, 0xb5b2295e, 0x4e794f78, 0x4083efe0,
-	0x3907de9d, 0x5677df27, 0x43086d7e, 0x95f739fa, 0x4fb8f883, 0x7b9c91f0,
-	0x7246cdb1, 0x23ed4fac, 0x626bb739, 0xf947af11, 0xbd6e50ca, 0x24a7f138,
-	0x7c12fa3f, 0xd29ef865, 0x2f8ea566, 0xd01d81cc, 0xe490b6d1, 0xe7896cc9,
-	0x6a5db051, 0x71138f13, 0xe1932f78, 0xde86d8c4, 0xd443f23a, 0x3a97b466,
-	0x42f72a27, 0x25f9ff1a, 0x31f53f3f, 0xe456bef3, 0xc50372cf, 0x6abec07d,
-	0xc0ed097e, 0x8c16b105, 0x4dc287a7, 0x898c5fb9, 0xe22966fe, 0x7da31de9,
-	0xbc3cc4ec, 0x9f91f4cf, 0xf64ed401, 0x5a6bf57c, 0xd5fb37f2, 0x7e517b03,
-	0x71f68db9, 0x0e9e0113, 0x547af74d, 0xbed41771, 0x67ed342e, 0x1c91bd21,
-	0x97d6f4e1, 0x07bf8bb9, 0x4e4fdf22, 0xfa00f192, 0x7d22358c, 0x87cf1c08,
-	0x409ff6db, 0x9dd7d379, 0x943a724a, 0x3db6ce9f, 0xe3728116, 0xaeefd043,
-	0x87c07880, 0x7ca59f8b, 0x0798f980, 0x6b3de502, 0xf837cf83, 0x2fc98fed,
-	0xda039b64, 0x821b1e91, 0x4170a1eb, 0xf106f4ba, 0x7df68b81, 0xc01bf23f,
-	0x777a6aa7, 0xa861c235, 0x52ea173e, 0x4850fd40, 0x2b3fa43d, 0xfdc3f6e1,
-	0xebcd1813, 0x25eded18, 0xcf1f7e3f, 0xbd07adef, 0xe103f546, 0xee2d3f74,
-	0xc315bd03, 0x8bea16f5, 0x8a6e88aa, 0xd01df55f, 0x83cabdd2, 0xe1259fed,
-	0x291e81f9, 0xfed5534e, 0xf7fa2c72, 0x699826eb, 0xb18fd07e, 0xa0731794,
-	0x11fd163d, 0x7a21dda5, 0x0cf7e5d2, 0x287e50b2, 0x9bc94eed, 0x42e5794e,
-	0x5f3e1677, 0x8719cb27, 0xeb097508, 0x10e1ce8c, 0x76b3df38, 0x287ce489,
-	0xf4c956de, 0x8b21f20a, 0xe15e39f2, 0x1e4503f1, 0xe572c854, 0x7267b610,
-	0xf72937fe, 0x84cf7852, 0x9c8c3f7c, 0x23815af8, 0xcef8a5ab, 0xbccd13fd,
-	0x79a78f2e, 0xe789fc79, 0x3e7abded, 0xc713252b, 0x45f79599, 0xd528f2fd,
-	0x0e505f2f, 0x781c93c4, 0xe70b1d50, 0xb0467caa, 0x8a90c3d4, 0xd04535d2,
-	0x2d532d9d, 0x1ab8a22f, 0x2e1ae7e6, 0x1d2857df, 0xf8e44e45, 0x1fb914ad,
-	0xa057b95e, 0x6a73a5fb, 0xf2076f7e, 0x580fde86, 0x08a6b056, 0x18beeff9,
-	0x5fd026a7, 0x4bfcd6be, 0xcbeb821b, 0xc514d76a, 0x95e7c30d, 0x8d76b6ab,
-	0x57cf9764, 0x8a2c6f61, 0xaede5f35, 0x5e9cfbec, 0xf574e7d9, 0xcc7840c8,
-	0x1234535f, 0x7fba65ca, 0xdcfc1e17, 0x5eb5dae7, 0x5d2d57ca, 0xb7c4f743,
-	0x8a0daa5c, 0xbe6b5eb3, 0x7ba6e60a, 0x3fed2b90, 0xde0874b4, 0x312b8c5e,
-	0xc43dafe0, 0x0137c067, 0xf4cbc5eb, 0x289f143a, 0xfd063c5f, 0x3c5f6653,
-	0x113e3026, 0x339be25a, 0xb88ae522, 0x2c3e04a8, 0x0f030cb3, 0x89d1ffa5,
-	0x3f1ace3c, 0xa8f1d391, 0x5e3b55d9, 0xe9d71462, 0xa57bf941, 0x22fe4cf7,
-	0xbf07efef, 0x9c233267, 0x9bd4ebf7, 0xdfd3fe30, 0x87c50df9, 0xe619d7fb,
-	0x03077bf3, 0x5de7804b, 0x029be3f1, 0x26abc0e3, 0xdc243b71, 0x9a9dedca,
-	0xe3d5f50c, 0xa1c6994b, 0x1bd912f8, 0xdf74e199, 0x05f6d7d2, 0x8efeb7e9,
-	0x8bde133c, 0x0dbb75f4, 0xff356fc8, 0xa8b17ffc, 0x3e3afb87, 0xbeb4bca5,
-	0x7ca33f6f, 0xde728db5, 0x3936a1e0, 0x6cdbabdf, 0xe2fef6c4, 0xbf6117bf,
-	0x8fe9724d, 0x98f8f02f, 0x83f12a52, 0x3bf9ff00, 0x4c7b53d4, 0x54c51f1b,
-	0x2db0ca99, 0x7fc0bf24, 0xe1bd468e, 0xe3982b8f, 0x04c38b86, 0x54d215c6,
-	0x2580ae3c, 0xd2d215c6, 0xeb015c78, 0x12c05718, 0x8ed80ae3, 0x63ac0571,
-	0x18eb015c, 0xc63ac057, 0xb8c4b015, 0x297fb602, 0x0fd1e7bf, 0x3dc78b82,
-	0x57f7240d, 0xc0337e62, 0xbf27656f, 0x47b95abf, 0x7c617ba2, 0xdff503cf,
-	0xad3b7965, 0x678ede72, 0xd607dd2b, 0x882c901c, 0xc41f7c22, 0x3bf98e95,
-	0x1e314703, 0x5822d354, 0x7db198d6, 0x6363ed3e, 0xa507de47, 0x6d47bed8,
-	0x4f44cd11, 0x828d9f1c, 0xd57c8f5b, 0x57e287b1, 0x949d7105, 0x2cd35fef,
-	0xcebb8c30, 0xd93f72d3, 0x0e6b4129, 0x1d92abdd, 0x9376d4ed, 0x9cf552ff,
-	0xef7c0e60, 0x45e266bb, 0x7dca1392, 0x88fe52f5, 0xf37a3d39, 0x6b3d2092,
-	0xf85779e3, 0x29c7ec27, 0x1d9377e7, 0x2d176012, 0x6c6c7bc5, 0xf7a5be97,
-	0xe0e09c4d, 0x9dae108e, 0xd1d95577, 0xb5f31eb2, 0x55fe687e, 0xdef924e1,
-	0x47bf9b3a, 0x92f8fc52, 0xbd60077d, 0xb25a2dc1, 0x609f6e53, 0x1e526dbf,
-	0x28d819e6, 0x53b472ee, 0x27d67e4f, 0x8a0faf5b, 0xd74a14bb, 0x8563dc51,
-	0x7dfd205a, 0x3b9f6ac4, 0x4672e809, 0x6f14bdf1, 0x246f1199, 0xf0e8563e,
-	0x4fc96b49, 0xe315de70, 0x0a9877f9, 0x34e7ecb5, 0xa5cf9c9f, 0x5eb0a9e0,
-	0x2cf7e370, 0xbd0b3316, 0xc008b03f, 0xe5517187, 0x188b1ffb, 0xe850afcf,
-	0x8156c56a, 0xbcbe8ae8, 0x84bdf010, 0x103df845, 0x6af77fd0, 0x289bfdb9,
-	0xc4f27bf2, 0xe28f3c4d, 0xfca7663e, 0x7d486591, 0xd7d7e912, 0x0f6ed07c,
-	0xdb892ebf, 0x9c38e6f7, 0x3571f17f, 0xc61707e5, 0x276e9edd, 0xf9405f3d,
-	0x6ef78213, 0xaf1bfbe9, 0xf3833f26, 0xb9aa8e27, 0x927801dc, 0xf485d59f,
-	0x3b1ef14a, 0xcaebc795, 0xbf229ca9, 0x5efa161f, 0xcbe77f43, 0xb0be382d,
-	0xf84160c6, 0xc03df15f, 0xffbfabb0, 0xebf394e6, 0x5c9ec512, 0x6be3c233,
-	0x51e10583, 0xef49d718, 0xf3caa589, 0xb25b9c3f, 0x8b69f109, 0x1f5c2e60,
-	0x00b669ef, 0x40f08b7c, 0x3dd1c602, 0x66cf7c36, 0x513053a0, 0x7265f53e,
-	0xcc3aeb74, 0x1349a953, 0x2daf184c, 0x1852db0a, 0xa517f30b, 0x7677d324,
-	0x1c78da6a, 0x4e4a0fb6, 0x92dc5307, 0x62aac7c0, 0xf1cf7e31, 0x3fb5cbe8,
-	0xdfcf293d, 0xb3e65b3e, 0x782f8efe, 0xe3b5f11e, 0xfbe9bbb4, 0xef4f4c1c,
-	0xf60fd3af, 0xd1c6fb35, 0xe855af14, 0xae39b068, 0x45a8e909, 0xa5a513d6,
-	0x8ed1a9ef, 0x37b3cc68, 0x96ca1c23, 0x4b175c5c, 0x4e3e1ce7, 0x87dfe4a6,
-	0xe502c9c6, 0xde46ffed, 0x5aba89fd, 0x5baddf2a, 0x9d776545, 0xe8079e8b,
-	0xbf08238b, 0x7d6f101f, 0xf130d27b, 0x4733a656, 0xbe05be92, 0x90edf1e7,
-	0xbbf02af8, 0x33efc018, 0xd9eea23a, 0x8348f680, 0xcdf782c6, 0xd2bcff98,
-	0xfde1f240, 0x59c6c349, 0x2819f815, 0xf4c83b2e, 0xe9878839, 0x112aa919,
-	0x926dff9e, 0x44e71410, 0x2273c1be, 0x7c8960df, 0xf9f952a3, 0xa30d69e6,
-	0x7da194ef, 0x40fb22e0, 0xbf5df84f, 0xd40ae406, 0x20a665ef, 0x442172b9,
-	0xf32380ae, 0xac5f7a33, 0x0936cb43, 0xe9cffcfe, 0x19ca5c50, 0xb878ce46,
-	0xe61d199c, 0xb3be9e79, 0xf9461d50, 0x44efc0c5, 0xf2374767, 0xac25bdbc,
-	0x461dd684, 0x3e7bd0de, 0x38188ef7, 0xbff414f9, 0xd90361f7, 0x9613eb39,
-	0xe477ffe6, 0x71279fcd, 0xdf813c78, 0xed5d5073, 0x059b0e7b, 0xb15d8fbc,
-	0xbe236590, 0xc439ef95, 0x7bf218c1, 0x39eff5ff, 0x123c988c, 0x0ae0e7bf,
-	0xdc439efa, 0x30e7be15, 0x6171b26a, 0x461cf7e0, 0x30b11e4d, 0xc60e7bf8,
-	0xb29df885, 0x39efc1ff, 0xbbce4fa4, 0x370e7bfc, 0xa0ff364e, 0x3d8039ef,
-	0x4fe3899b, 0x63c6d8e4, 0x3b9f2899, 0xe3e5fdf4, 0x97643df2, 0xb2c52f68,
-	0xa2a5c228, 0xc56dd176, 0x73d16df2, 0x5f03b63f, 0x1578444c, 0x037d963d,
-	0x5125977e, 0xf2bca1eb, 0x49b6ad27, 0xb96bff38, 0x3cf8c9b6, 0x2f5fde34,
-	0x73f60f9f, 0xcd0bf60b, 0xe2e8531f, 0x0e5cc9ae, 0xa9cb93cd, 0xc7bfc3f5,
-	0xbf326f3f, 0xbed6be4f, 0xe077bf61, 0xd9feca7a, 0xdc56c596, 0x4ef7ec0f,
-	0xb7ec27dc, 0x88664b04, 0xf80f7a0e, 0xc9757a72, 0x2e7462fb, 0x3fb38f90,
-	0x9528f6e1, 0x14772ae9, 0x1ea30dda, 0x7ee14770, 0xe80e3547, 0xdf907df1,
-	0x68f406ba, 0xf576fc3f, 0x7fdb1e80, 0xdaf9e36b, 0x9f6ff3a1, 0xf491fdcc,
-	0x7e3403a9, 0x4dddfc0c, 0x1440c1fe, 0xe5e96dda, 0x14ae3447, 0xf66d4f7a,
-	0x93764127, 0x8c7bf899, 0x01e636dc, 0x8c3d2191, 0x1e78c1d9, 0xe90c4163,
-	0xef1d4ab9, 0xfdc0f95a, 0x38d1d222, 0x803bec37, 0xaedfaefe, 0xaf7e0c1a,
-	0xaae34bd7, 0x5ec025e4, 0x64ee7a0b, 0x9474bf3c, 0x5ed08f2c, 0x39d9efc4,
-	0x77d08fcb, 0x0b8ec0a6, 0x79be8f99, 0x594f9430, 0xe6bfb3ad, 0x62be5333,
-	0x77a5bf50, 0xfa3d66ff, 0x5ba5e5b5, 0x2f17e435, 0xa58f5969, 0x269ef1c3,
-	0x197d918e, 0xcbec1fd4, 0xfb65faa0, 0xf547d90c, 0xc7d717fd, 0xd02eb30d,
-	0x13a456c1, 0xaa8e0e85, 0x4fd0e33d, 0xb30cea3d, 0x3c1df7f0, 0x269a5df4,
-	0x5df4bdf9, 0xcadd39ff, 0x5d3965f3, 0x3f1df8c0, 0xa9ea8e8c, 0xaf1df2bf,
-	0x1c8a956b, 0x8dcefa1c, 0x5e28b986, 0x7248cb39, 0xfff646ae, 0xc89897aa,
-	0xbaf8511e, 0xb539e55a, 0x18c5fb1e, 0x8a9bfe79, 0x7aabf7d1, 0xcf9451c4,
-	0xcfac3f4d, 0xacfba54a, 0x178f7ad8, 0x5db81de7, 0x15b9efa0, 0x5ab97384,
-	0x9e389628, 0x4447e785, 0xa7815dfe, 0x98487e51, 0x37bfc147, 0xbf972530,
-	0xf8cf103f, 0xca98db77, 0x369df21c, 0xed7a1e39, 0xeff1b4ef, 0xf7e7cd92,
-	0x25510d72, 0xf9f1cba5, 0xf9e81b82, 0x1f52efc1, 0x2afee2b1, 0x71b4ef94,
-	0x4e61bf7b, 0x557f3d06, 0x3d41af30, 0x5d807ae1, 0x7a6d3be9, 0xef80fbe4,
-	0xf887bdb3, 0xd9f7d6ba, 0x1c0fef94, 0x23c3705d, 0xbd1c397b, 0x3355ef78,
-	0xafe418cb, 0x3c3117ff, 0x56c0d29e, 0x000056c0
-};
-
-static const u32 tsem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x3370278a, 0x45e39c30,
-	0x8381e9f0, 0x5fd32918, 0x50c0cec6, 0x4055c401, 0x3f880bbc, 0x7c3032b1,
-	0xff5e2566, 0xdb042935, 0x21818248, 0x88d7881e, 0x49a83031, 0xa41dc422,
-	0x03261819, 0xb150a1f9, 0x5f3a4047, 0x0f77328a, 0x80a69c16, 0x872ae629,
-	0x9163a760, 0x6819c647, 0x50e54bf2, 0xf40499f9, 0xa2be340f, 0xa2ffca8e,
-	0xa013a10a, 0xe4d157e2, 0x3be542bf, 0xa6bafea0, 0x4edcdd8e, 0xc35dfd32,
-	0xfc01a102, 0x9847b099, 0x009847b0
-};
-
-static const u32 tsem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7dedff00, 0xd554780b, 0x733ef0b5, 0x7993331e,
-	0x31e424e4, 0x1e4e1081, 0x03086820, 0xb78a8884, 0xf6301027, 0xd57876d2,
-	0xaf0e2d58, 0x6b86f210, 0x7fb6bd2d, 0x78490806, 0x111fc1a8, 0x29e1d5ad,
-	0x311d82f6, 0x0388b622, 0xbdabd228, 0x557c5837, 0x0bd11feb, 0x2a44908a,
-	0xe5b5ef6a, 0x3ef6b5ee, 0x09939cc9, 0xafdb7b04, 0x7cfdffff, 0xc7ecee9f,
-	0xf5ed7bd9, 0xfdad6bda, 0x8131c918, 0xe4230da4, 0x06fbfc22, 0x109d9221,
-	0x9d37a132, 0xd72120e3, 0x66924218, 0x92ddfd2f, 0xbadc4214, 0xa349bfe2,
-	0xe4febba9, 0x5f5f9a1a, 0xa4aff0ec, 0x4d1f5b4d, 0x2d096a78, 0x2fa1efbf,
-	0x7cd04fc3, 0xad79ecfa, 0xce7eb4c5, 0x5d0fc924, 0x10ab1a1d, 0xd8e7ed02,
-	0x520176c2, 0x9097e581, 0x927fa130, 0x45f8e8af, 0x9fe8b884, 0x37fe9724,
-	0xa5b21c89, 0xd1e43e60, 0x99029ea0, 0x31364846, 0x7e6055fe, 0xf509fc36,
-	0xd0677744, 0x779e75ef, 0x7fec13e5, 0xdb0a5f8e, 0xf27347e9, 0x4dc87203,
-	0x6d08c6d3, 0xfb1dc749, 0xf908395d, 0xe4990cc0, 0xd8b68763, 0x0fca6ffe,
-	0xd214754c, 0x080b67fe, 0x49d9f9ff, 0xcc82da36, 0x3be1eda6, 0x1a1f4e22,
-	0xd99f67cc, 0xe0dfb8e8, 0x40dfdddf, 0x5fc0a7ff, 0xe5a1094b, 0x9e0c1ccb,
-	0xc5d9d9e4, 0x1989ce30, 0xbf4316d7, 0x3213a673, 0x9d4d5688, 0x4490f63d,
-	0x891aebf3, 0xcddb4edf, 0xcf1c0d29, 0xcbf8d981, 0xe80293a7, 0x60ee8e97,
-	0xffc45f7d, 0x64ef38eb, 0xcc3fde3e, 0xfa102b1e, 0x8a97f641, 0xa0725da9,
-	0x4bd153f9, 0x2d056a48, 0xee53191f, 0xd09a769f, 0xe6e9e4f2, 0x721340f6,
-	0xc425211d, 0x1aea7293, 0xc91677fa, 0xad4228ba, 0xee8c0b6a, 0x4a6b0fe5,
-	0x22f9fdff, 0x12fa01d0, 0x6a1fd6fb, 0xa0e9e99c, 0x7b375af8, 0xf4d08796,
-	0x0f2cc0f5, 0xd9f5efe0, 0xd68f10b3, 0x676673f6, 0xfb5e0227, 0x06feef1b,
-	0xfa08d03a, 0xb5b3c73d, 0xea48907e, 0x39fbf423, 0x31c3d13a, 0x9301dffd,
-	0x0964254d, 0xb34d1b30, 0xd2a6d525, 0xe88d6cfa, 0x95e33891, 0x3b69b102,
-	0x28994992, 0x0ff352e3, 0x2637bb61, 0x71c34ad9, 0xef0773e6, 0xb81a55c7,
-	0x6fa50e67, 0x751274d6, 0x2912ba51, 0x75e2c6aa, 0x1a548a5d, 0xddc7038e,
-	0x68425e1c, 0xe1c0cf7b, 0x02d86571, 0x47329fd0, 0xf5c2c40c, 0x42678003,
-	0x4ca24a6f, 0x18f8e6ee, 0xfbbf72fd, 0x338f506c, 0x8e00bb8f, 0xecaa9009,
-	0x0c8f0e3b, 0xb201937c, 0x43fc8296, 0xe02463c2, 0xb91eccfb, 0xe5070124,
-	0x17f0a18f, 0xa42dae15, 0x1412d47b, 0x47ec56b2, 0x0324a4f4, 0xde1157bd,
-	0x4f51290f, 0x42157e51, 0xd78b84ab, 0x129e6a5c, 0x35f06539, 0x193ba9f0,
-	0x5e1cbfc7, 0xe518a048, 0x88d43152, 0xe307c078, 0xed4df92b, 0xbacba502,
-	0x947ee5d1, 0x90218a6f, 0xe17e4333, 0x3bf457df, 0xbdccff37, 0xca91d29c,
-	0xd3396b91, 0x2cdf8a8f, 0x8e92eb67, 0xc82008b5, 0x0f49b964, 0x40241210,
-	0xeb6f0377, 0xbc78a2be, 0xfb5bbf04, 0xe7c86fdd, 0xc9983260, 0x053f9327,
-	0x79bd07fa, 0xf0077ed3, 0x5edf3af5, 0x5d6bcc07, 0x7a825efe, 0xe8c7d38a,
-	0x5daf95d7, 0x81d6ce52, 0xee808d7c, 0x9ea748c3, 0xc6a7d1f2, 0xa6767e02,
-	0x748bf72a, 0x08933b7e, 0x6b75d9ea, 0xd02b7848, 0xb5e594b5, 0xb5e1696f,
-	0x9d3b8e74, 0xd698bebc, 0xed06bcd3, 0x3adbbea9, 0x68870b49, 0x8d8b6b7e,
-	0x85ab1fb5, 0x311f9a45, 0x8a148491, 0xc2c56d4f, 0xbe5a4e95, 0x17eaa375,
-	0x34fd5eb5, 0x2d6725a2, 0xdeb2dfb4, 0xbdf00aa6, 0x3b23ad8f, 0x443849f3,
-	0x39b1dfc7, 0x69239bf9, 0xf9b2143e, 0xf24fd387, 0xd945faf8, 0x022844a5,
-	0x9c3a31b4, 0xae5c7921, 0xa9e50204, 0x7ecb7cbc, 0xa48ebfff, 0x5d363df0,
-	0x45a0aff2, 0x4ccfd63b, 0x769e28d0, 0x3f048168, 0xc0f07f4d, 0xccefcc7c,
-	0xdd00260c, 0x9f9c6e76, 0xc0f14c00, 0x461b99e6, 0xd2617b41, 0x6ce91d61,
-	0x1f47ffd6, 0x00ec3a28, 0x9e994b38, 0x7e0d6a4f, 0xbcf9a253, 0x89b91249,
-	0xadcf214e, 0x1fdbdc21, 0x4f5811b2, 0x8b6de8fb, 0xcdd44ebe, 0xb4eb5779,
-	0x5d7f818f, 0x2009160f, 0x86353bda, 0x923741e7, 0xbeec8af0, 0xc85cefe3,
-	0x5d2913ea, 0xbf2e0e80, 0x96675962, 0x4756f85a, 0x3c717079, 0x1c755ab9,
-	0x897a488f, 0x578bd690, 0x62469ffa, 0xf07ae9f0, 0xe9f58128, 0x8163e78a,
-	0x7ca05d27, 0x9cab830f, 0x1c1eb9ef, 0x6357caf7, 0x21b1f1e3, 0x7fa01eef,
-	0x6177c522, 0x50eb0424, 0x0a24617a, 0x57c9e2fc, 0x9a0bb034, 0xc5c93109,
-	0x7cfbd1a1, 0x1337201d, 0xaf583e22, 0x837e8dd7, 0x81568fc9, 0x6fe630f8,
-	0xb7e4f7b4, 0xc1fb5893, 0xf87287a8, 0x697853ce, 0xcb87bb39, 0x847f4f59,
-	0x732447ad, 0x4f75c21c, 0x5e7561e1, 0xc84c7d1c, 0x97cb940a, 0x817ae049,
-	0xedcddea6, 0x6c06a751, 0x7900dfae, 0x910240b7, 0x134ddf38, 0x42d27ad8,
-	0xe9a05d74, 0x162f44a3, 0x664b9d70, 0x2eb2d7fa, 0xbc9fd1f5, 0x16e9165d,
-	0xd468df40, 0x8734803e, 0x23cd31f8, 0x92474c01, 0x26af4c56, 0x49f34c11,
-	0xa405a63b, 0xaf43531b, 0x422a89f8, 0xfac4c47e, 0xa4e720c9, 0xe58b63da,
-	0x3264d0bb, 0x3cce3eb2, 0x73782d9a, 0xf8ebf890, 0xe75f021d, 0xfc8aa648,
-	0xf17af843, 0xe818b06e, 0xfc2854c5, 0xefccdbbb, 0x0ebe24e2, 0x693dea38,
-	0xdd335780, 0xcd54548d, 0xf06d5a7c, 0x1c2444a9, 0xc41f32c7, 0xd6b8cc63,
-	0xfb7356fe, 0x9c9f98c6, 0x491f23a2, 0x50cf666e, 0x71bdf438, 0x0828d1f0,
-	0xab419e7c, 0x29b23adc, 0xb6494bbf, 0x6b9a5ac8, 0xe8764f74, 0x893f2f38,
-	0x7ceb6747, 0xbe2af0ac, 0xa9b3c181, 0xcb0a9e07, 0xc297fa3a, 0xfea64ff3,
-	0x1db24ca4, 0x86a20bd6, 0xbc56de70, 0x42def9f6, 0xd2e4fe8f, 0x57d66991,
-	0x02d78a4a, 0x069f8587, 0xe37c7f68, 0xe47fea4b, 0x211bfac3, 0xa9ec2a41,
-	0xe60101f9, 0x1a40ad7f, 0xc85e2913, 0xa0eda268, 0x6af5cd70, 0x698b8ecc,
-	0x91f41937, 0x74c90b66, 0xee92cfbe, 0xe43ed023, 0xf41d9127, 0x6df367b3,
-	0x7d695ba5, 0x63b69faa, 0x1e4005fd, 0x0b6d1dae, 0x9fd1b940, 0xf5329e4e,
-	0x112efd47, 0xe836e1f0, 0xe4c3f163, 0x1fb436b1, 0x6fa27c95, 0xc75f2389,
-	0x1d157cb9, 0x9eb0ea71, 0xb094cab8, 0x8ffa1b33, 0xb53e4314, 0x5d61f89a,
-	0xe6cdd49f, 0x30e1c651, 0x59fa9de6, 0x6a7e0040, 0xc03b31f7, 0x3fd04855,
-	0x74da3254, 0xb4dd1ff0, 0x7e42f50e, 0x50531754, 0xd83fa23f, 0x5f3d9e1f,
-	0xd00bed3d, 0xb9d47d7e, 0x92be076a, 0x9fa0e9fc, 0xc8568f57, 0xf8bdfa60,
-	0xfff63b3b, 0x1862a7b9, 0x47cf9989, 0x0bb1d10d, 0xa670c1a9, 0x67a618e1,
-	0xed31da1b, 0xd30b786c, 0x594ae9fe, 0xebceda8e, 0xc0d7e27e, 0x3f0f101e,
-	0xc00f3447, 0x5c75d51d, 0x12a21c17, 0x82802eb3, 0xd36fff06, 0xdaf0bcd8,
-	0x086bc46c, 0x67d54de6, 0xe0367878, 0x9e000a5b, 0xc2223887, 0x77867cd2,
-	0x01d03fc0, 0x3c8e8bca, 0x5cf102b7, 0x9e02c64d, 0x0ca4c937, 0x13e03cf4,
-	0x827d89d6, 0x03800eed, 0xfe69f3f2, 0xc1fa8ffa, 0xf78659fb, 0x9e29978c,
-	0x4b494e00, 0x8eadc664, 0x913b95f2, 0x27d7120b, 0xf9927abd, 0xbdf6bdd9,
-	0xcf00eff6, 0xac894696, 0x68a6bc85, 0xf7b7114a, 0x15824a41, 0xdcdfc1d3,
-	0x28fd3e56, 0xe2b90bd8, 0x5a648757, 0x3a5eb43e, 0x4f2311d9, 0xfd746559,
-	0xb0c276a4, 0xecf2e6e5, 0x074f3990, 0xb7347f40, 0xc43e5cc5, 0x87aef5c6,
-	0xad1e4078, 0xe8b65af3, 0xd3fd7157, 0xea240d55, 0x02f26396, 0x1791a7c3,
-	0x423b13bc, 0x46cb7e74, 0x4c038c11, 0xb3f5b1b7, 0x7ca3be15, 0xd74f2f71,
-	0x5231fa5b, 0x46dba269, 0x193d30c6, 0xddba7d6f, 0x46ce3c56, 0x4db06bfb,
-	0x72a3671e, 0x042292e4, 0x5b9777ec, 0x93f9e3d1, 0x8e126dd3, 0xebb5209f,
-	0xfbab8522, 0x4adfe23a, 0xee4cbef1, 0x2c7c828e, 0x21fcd62b, 0x30fe4750,
-	0xd51263ca, 0x15f66261, 0x700253c1, 0x6c4a7850, 0xfb044e38, 0x0738a6e9,
-	0xcc997dfb, 0x4a365dfa, 0xf6376823, 0x3655e703, 0xd80ce119, 0x34fd0904,
-	0x1555974e, 0xa34df739, 0x9f554ed9, 0x2667fd05, 0x78c16705, 0x7e6fb946,
-	0x1963fa29, 0x2bf4ccc3, 0x0167d477, 0x2206547f, 0x4e7f80d3, 0x926c5f7b,
-	0x36b7bce9, 0xf144bf10, 0x702b9eff, 0x7357f41b, 0xb008fd7b, 0x5e06df7f,
-	0x3b2a0098, 0xa5ac7a80, 0xa25fa564, 0x148972e5, 0xca3f2995, 0x25bf0f13,
-	0x2a1a4017, 0x938b3886, 0x477d33d4, 0x35224bf5, 0xf5231cbd, 0xa27e218f,
-	0x72d03c80, 0x60256f55, 0xdba8380f, 0xef863270, 0x1e734c94, 0x7cd8fa6c,
-	0x72e37a7f, 0x27e79829, 0x09fe0387, 0x49dde9da, 0x26927fcc, 0xde000bfa,
-	0xa6ffaf7b, 0xc4fcf006, 0x67f93366, 0x5a4d7f56, 0x79696ffe, 0xfee26810,
-	0xd5fcb4b6, 0x80f1bcb4, 0x979c5697, 0x9432ca63, 0x24f0050b, 0xbf07f932,
-	0xe41d67be, 0xcf5bf878, 0x572f58db, 0xf835bc37, 0xa720e1c3, 0xa43f831d,
-	0x052d59c4, 0x3e42ff91, 0x1c28b5f0, 0x098f9992, 0x62134f78, 0x18176e52,
-	0x5a9c9bf6, 0xdc947488, 0x988ea9d2, 0x8fc0ddf5, 0xc1ddfcb2, 0xf4878e1f,
-	0x78ad4c6d, 0x0120a455, 0xd768d03f, 0xe018b713, 0xe234effa, 0x1fc479a9,
-	0xa47338a5, 0x7a6a78b0, 0xf30a285e, 0x09fd5272, 0x233dd3eb, 0xf0c56b5f,
-	0x3b0fc581, 0x3f20ad94, 0x61b68cb4, 0x7865b35c, 0xf90290e4, 0xd1406a0c,
-	0x5dca677a, 0x4c6d8821, 0xe37c63cd, 0xd4f5b3f4, 0x7e8c3c35, 0xbdbfa198,
-	0xad5e1f1c, 0x67b3f51c, 0x31ded9a2, 0x2b2701d6, 0xdb36f4a2, 0xa694ce51,
-	0xbe82c54f, 0x9b539a7e, 0x69e51a76, 0x233fb9a4, 0xe36ed1de, 0xc96b8bf1,
-	0x593768b5, 0xe1fd12e2, 0x71f86bcd, 0xdcbcd913, 0xfc1849d3, 0x5189f4e6,
-	0xcfd79bc4, 0x9bd866f0, 0x9bbf3e1e, 0xfc04234a, 0xf3f89ebe, 0xeb6f0ccd,
-	0x7fa28baf, 0x29ec7eb7, 0x85bd67b4, 0xce3f261d, 0xa1ca1ef8, 0x76c4fcfe,
-	0x18f6a1a8, 0x23711bcb, 0x19e9a78a, 0x61ebbd69, 0xaddbb72b, 0x92275374,
-	0x4763d062, 0x8315a747, 0x84b7bede, 0x3cab4ec2, 0x6297587a, 0x7ef2adf0,
-	0xdf867cd4, 0x7cd8cb7b, 0xd3f47b69, 0x93989def, 0xf266e304, 0x7f11b0f8,
-	0xebcbf1ee, 0x284f78cd, 0x2d85c4b4, 0x67eab77e, 0xcc4b52f4, 0x5f39abe5,
-	0x57a7222b, 0xe8ce192a, 0x4f3e3035, 0x84bcf832, 0xdf3279f1, 0xd12f4837,
-	0x921d010e, 0x4dff994a, 0x4df37e2c, 0x5e8c1d29, 0x00c88f37, 0xa9fefc3f,
-	0x97663edd, 0x7126ba30, 0xc6efbc7e, 0x71c80211, 0x40268972, 0xc33e727d,
-	0x13c53253, 0xa5c977ac, 0x4ef6efcc, 0x525db0d4, 0x0b5ba309, 0x5fe14c7c,
-	0x898a7403, 0x5b4b3b1f, 0x6b7fa075, 0x741d4ef1, 0xe1c53259, 0xd4cf0a20,
-	0xd81b0a52, 0x805fb49d, 0xc51853d7, 0x49525ab8, 0xfca5d870, 0x82a2427a,
-	0x10f887cd, 0xe94b686c, 0x7e58253c, 0x20b26268, 0xa7ef7ed0, 0x80f1c07c,
-	0x8f173c71, 0x785fdfa3, 0xfddcf512, 0xc8364df0, 0x1cebf6a9, 0x36a5279a,
-	0xf707f83f, 0xf108e697, 0xbcc6e7e2, 0x2acb83fb, 0x35f812c7, 0x9572fc31,
-	0x16dee3c8, 0x22475dfe, 0x57c82e6a, 0xa5f76f48, 0x830feaf5, 0x65e47aff,
-	0xfecbe312, 0x87a189f4, 0xb21824dd, 0x1fd5f765, 0xdef8ce92, 0x7940179e,
-	0x24ef03eb, 0x8a52afc6, 0x9136fcb9, 0x5e867fdb, 0x140792d1, 0x00a12727,
-	0xd72277ae, 0x02da4f4f, 0xf054c50b, 0x4eb8c3bb, 0xae74c8b8, 0xca9f1937,
-	0xe6a6ff9c, 0x4ae2bd33, 0x9776b089, 0x903aa78d, 0xa834d6df, 0xc65a1fa8,
-	0x439ed5de, 0x7866b0f1, 0x73be1f93, 0xb9196b8c, 0x3cdbf68d, 0x2b70797c,
-	0x30fdc00c, 0xac22bfd4, 0x8d5f8c83, 0x0e03307d, 0x61d21992, 0x7e09cc9f,
-	0x2467e011, 0x24905fdb, 0xeb8fb512, 0x4795df1d, 0x6967cde1, 0x0dc19f28,
-	0xb6ebc9fe, 0x6f9c2ae0, 0xa2946b7e, 0xc99bce9b, 0x42216acb, 0xebcc225c,
-	0xb21e7c72, 0x9f8ebe31, 0x025df7f6, 0xe1c4d3ec, 0xdb22dddf, 0x472d59a7,
-	0x7e085088, 0xf289ed1b, 0x6a6ceac9, 0xa381c797, 0xd56bf391, 0xc3f8672e,
-	0x89ab7e18, 0x75f29924, 0x1fc233fb, 0x7711fac6, 0x514fb80a, 0x4358d1cd,
-	0xcf00b23a, 0xf61a29ef, 0x48eb6b57, 0xe9177c83, 0x78025b4e, 0x8b8f0310,
-	0x5277fd74, 0x90b8c4be, 0xd6eb607b, 0x81a7f0e5, 0x4085d10c, 0x0fa9e4cb,
-	0x178e9879, 0x69e307dc, 0xd2bf2b2a, 0xf5f0e371, 0x4d7cb10b, 0x6a5957c4,
-	0x147f6be5, 0x129ddaf9, 0x9fb77ac5, 0x8fc1b5f1, 0xad1f9c89, 0xbf8c687c,
-	0xd6afc79e, 0x335f3e72, 0x708549a1, 0x9b51dadf, 0x2ce69e30, 0x7c015cda,
-	0x25aa32de, 0x64de7c0c, 0x17df35f0, 0xdb2efea1, 0xa35ad31f, 0x72264eb0,
-	0xeed456be, 0xeb7b9006, 0x38935d7c, 0xbe0534bc, 0x5f39b806, 0x93f807bf,
-	0xae08ddfd, 0x076bd7c1, 0x45bad7cc, 0xfed39b6f, 0xc2d927fc, 0xf1891ed7,
-	0xd7c067e7, 0xb30a4f00, 0x963edc63, 0xdfea7eca, 0x06e7e9c7, 0x6b99f989,
-	0xe5ac1cb9, 0x1fb6b072, 0x223ff839, 0x9afe03f3, 0xc98b3072, 0xe5a24381,
-	0x8cae9389, 0xd3b0251f, 0x9e7bc8e3, 0xe1b5fc24, 0xbc4334de, 0x27fe3c72,
-	0xbe84cd30, 0xcfd234f4, 0xe4c0e744, 0x73c98f3b, 0x76be727f, 0xfe387c68,
-	0xa7f46453, 0x26922ef8, 0xffbe395c, 0x7215705a, 0x43f0367e, 0xb728c582,
-	0x3a667a31, 0x86a92bc0, 0xd304799e, 0x28ad79a9, 0x81be86a7, 0x2bfa0a58,
-	0x3bc62b6a, 0x68ad999c, 0x98f3399f, 0x24fc31be, 0xb88d7ceb, 0x33d71378,
-	0x02217949, 0x853d9feb, 0x9eaa3f70, 0xcc9951f9, 0xd5e2301f, 0x18a8fd86,
-	0xbbd0d47e, 0x79a79f70, 0x97da3d78, 0x3bd637cd, 0x36c3ede2, 0xf077eefb,
-	0x3ed35f4d, 0x0e5a1aeb, 0xbbc9aefd, 0xc3b3c49f, 0xfb18798c, 0x6e3e4e46,
-	0xa8b51e73, 0x32df5c60, 0xc76adefc, 0xfeb26734, 0x7ae7be7a, 0xbbd1ee57,
-	0x54768f2c, 0x6f9f8c6e, 0x03e0c7e9, 0xa343e885, 0xe4183710, 0x4ce7091e,
-	0x3f04849a, 0x924dc7d8, 0x90729d20, 0x5aa97b1e, 0xff401689, 0x9cbc6627,
-	0x3db2f685, 0xbce406b8, 0x0380abe9, 0x53aba9e2, 0x96c6f35e, 0xe6f19d9f,
-	0xa56cc1b7, 0x7ee2d5df, 0xb148838e, 0xdc2763fb, 0x4b7ed1db, 0xe9c737c8,
-	0x09ae149c, 0xcc13c402, 0xbf8f0ae5, 0x72e69928, 0xa45fc799, 0xe7394b14,
-	0xbe34b90f, 0xeb93795e, 0x7602df15, 0x1cc4e74e, 0x713bd716, 0x30674f2b,
-	0xdbc73efe, 0xc234f375, 0x535feef5, 0xf6e5251f, 0xe29befc2, 0x9922f8c7,
-	0x3ebb4765, 0x2b9d852b, 0x26e7b120, 0xa26b5fe0, 0xccfc6244, 0xff9781a1,
-	0x61d4f108, 0x06cabe0b, 0xea156b3c, 0xdb465861, 0xc79c6ca5, 0x28f74263,
-	0x3ae6cf18, 0x02f5fb8b, 0x6a72e345, 0xdbf40b12, 0xef8521db, 0x3a52c0bd,
-	0x91057b8f, 0x37c0ecbf, 0x8c29d022, 0xb1448ba9, 0x303a43de, 0xe61b089f,
-	0x5187e0b9, 0x33c44bbf, 0xc61b614c, 0xf6cc7e8d, 0x7888d643, 0x03a8836e,
-	0xedc9bfb4, 0x4297f82a, 0x1ae77e88, 0x40be77f8, 0xc4c8316b, 0xc608b2e0,
-	0x7cedad93, 0xa039d853, 0xaffb7a3e, 0x5237df4f, 0x548f8173, 0x1ce8372c,
-	0x694ef514, 0x5ff2df42, 0x12f38189, 0xdc58abc6, 0x2a5f5acd, 0xde4017e9,
-	0x0bc2e5ac, 0x7e053a7f, 0x6467aaf4, 0x3ca7a3f4, 0x41bf4723, 0x045b35f3,
-	0x076d53f4, 0x770fe89d, 0x51f2c23e, 0xfb43a28f, 0x8c05db73, 0xdbd9d507,
-	0xe201bdef, 0x0488cf8a, 0x19708dfd, 0xe29d8bee, 0x59fb2673, 0x80079cbe,
-	0x9a1cb66a, 0xec57df0b, 0x77d813b7, 0xf16e79a8, 0xf9a06fb7, 0xf464c7c5,
-	0xac766a51, 0x657f6050, 0x40885849, 0xc1326bbe, 0xc4fb43f1, 0xbeda0ef0,
-	0x369edbcb, 0x2bfb0dc7, 0x455da20e, 0xa7b4f6e1, 0xa9f4a6cd, 0x0d353f0c,
-	0x2ddcabbe, 0x98ffc1f8, 0xa38eccf2, 0x9abbf419, 0xa73c0427, 0x45cbb550,
-	0x9cba18b4, 0xdfa3136a, 0x9d33f880, 0x8bc5f827, 0xc034eb49, 0x0d8ecd7b,
-	0xb713168a, 0x9230d33c, 0x7cdef668, 0x1c7413cd, 0x93ed5dfa, 0x58a61f82,
-	0xe041236b, 0x9ce7ce8f, 0x30dcdb65, 0x08ca15bf, 0x59abcc0f, 0xc38b7681,
-	0x7ec1f6f3, 0x8b78657a, 0x57d68d32, 0x2945b23e, 0xaaa7e18f, 0x2d10d75d,
-	0x6d4e3f86, 0xd4bf4dce, 0xae867b7a, 0x54f0b15b, 0x88b7a612, 0xc4665614,
-	0xc8767bec, 0x453f9c49, 0xdf06ff53, 0x18275e87, 0xef3d0ac7, 0x741abc41,
-	0xbd32a65b, 0xbcedd060, 0x7528e9ca, 0xb388cd17, 0xd02f7aaf, 0x2af10ec1,
-	0x1bfbd315, 0x6c6e987c, 0x9b3e90d0, 0xe1577f00, 0x7b9606be, 0x88629127,
-	0xa275788b, 0x3c9f52c2, 0x21962f5d, 0xf960124e, 0x8283dbb4, 0x1bf98976,
-	0x383926e9, 0xb75c820f, 0x964c4fc9, 0x49bebae8, 0x7e252e09, 0x77b4be3a,
-	0x6075c972, 0xc8e705a7, 0x1d9fb0a9, 0xe8f160ac, 0xa2e40f88, 0x7ccbef89,
-	0xd6f2664b, 0x7c60a194, 0x8bf7d364, 0x41eda1b6, 0x7d365e18, 0xec277cbf,
-	0xe67ed1ab, 0x1aae54ca, 0xee4fda65, 0x9b49fbe5, 0x4fd4d13b, 0xa30adcda,
-	0x8fd8c59f, 0x6cfd6073, 0x19bd7b9a, 0x4695b99e, 0x8fd8f53f, 0x4af36067,
-	0x199263bb, 0xb1aa3b9e, 0xfddbf49f, 0x06881f68, 0xdc7690ff, 0x4eef7517,
-	0xc496b71a, 0x1fe4d1f2, 0x2a1e78c3, 0x947cb155, 0x24c13138, 0xb27a494f,
-	0x74a83f29, 0x6a7da9b0, 0x9f54c720, 0x85b5765e, 0xbfa8dd2f, 0x8a814f31,
-	0xab38b126, 0xbd415832, 0x81d83c53, 0xbb06bbf9, 0x75dcef51, 0xb02af07d,
-	0xd05600f7, 0xc12977f3, 0xbe1c6a31, 0x0812f3a1, 0x1b34cfc6, 0x32ec7da4,
-	0x7939efbe, 0xde2357c8, 0xd9d7dfa7, 0xd12447ba, 0xf14a43fc, 0xadef3023,
-	0x8de3b332, 0x9d824338, 0xce6bfea0, 0x8a16da2e, 0x50cb6bc1, 0x6f422fca,
-	0xd0722dbf, 0x73b8fc07, 0x4a576ff5, 0xa1a6be14, 0x7a6e1e0a, 0xe1edfe5c,
-	0x9b99b510, 0x00fb9687, 0xea8576ff, 0x15f1d88f, 0x8e3e7e3a, 0xdfc61bbf,
-	0xd93b332b, 0x673dbe3a, 0x477c69a2, 0x7c698556, 0xa7c74287, 0xf56fb1f2,
-	0x8a7c7c3b, 0x7909ebbf, 0xc7077e56, 0xe05567b7, 0xa90acdf8, 0xd09f8d30,
-	0x9001fe33, 0xcdfdc39f, 0xf37ae73f, 0xcd2ab3fc, 0xfcd857f3, 0x80feae8f,
-	0xf3809f8f, 0x80fe597f, 0x92ab3fcd, 0xfacedfcd, 0xdbdf19ed, 0x6157ff83,
-	0x37f5affe, 0xe649dcff, 0x36ab0ff9, 0xc6cedfcf, 0x27f5637f, 0x8e377c7c,
-	0x09fca6ff, 0x6ab0ff9b, 0x07b15f1c, 0xca47c0fd, 0xf07a8490, 0xa461a99f,
-	0xa35d4061, 0x923a40e3, 0xc837a9c5, 0x5dc70839, 0x3eef8c09, 0xe6fca04f,
-	0x24a7d5ee, 0xea90254c, 0xd3ce5acb, 0x158bbb55, 0xd0842fe6, 0x41c4585f,
-	0xc45fb85d, 0xb46c8cf5, 0x78538787, 0x218bf73b, 0x78dc2fc8, 0xac5b9e23,
-	0x77dc13b3, 0xfa3056a7, 0xc0f1ff1f, 0xf3b1ade8, 0x5a8ba6b2, 0x13fecb65,
-	0xef38c783, 0xa6ab2454, 0xa78829fc, 0x127c3d50, 0x9e9a1ffc, 0xb478e996,
-	0x83f043fc, 0x1b958aae, 0x768c2e76, 0xce9f2277, 0xfe1cbbeb, 0xf7c31253,
-	0xdc053ba9, 0xc37cf847, 0xd9f40552, 0xc99756a2, 0x74e3a86f, 0x8ece7eea,
-	0x79c68dfb, 0x14505bbe, 0xc1fdf909, 0xbb051d6f, 0x41e6f171, 0x276eefa6,
-	0x1470d5e1, 0x79fac173, 0xff3a5543, 0xe3eccadb, 0xeb6b8c44, 0x9c1c5843,
-	0x49b8810c, 0x7906db59, 0x52dccd08, 0xf9ec9b26, 0xfce6835b, 0x7ce6156d,
-	0x6d961ca7, 0x112ccf60, 0xefda16c8, 0xcb65ebf7, 0x8e3600b9, 0x76e64957,
-	0xbbef1b25, 0xb4198694, 0x8e90fbe8, 0xe9156283, 0xdf65573a, 0xddd4f01a,
-	0xae28932d, 0xb8a91dc7, 0x454a140f, 0xb2a82dbf, 0x9de15b79, 0x00f43b2b,
-	0x8fee6785, 0x15a7c444, 0x2e838efe, 0xf3ed46dd, 0x907fcd8e, 0x9d6c7e21,
-	0x3bfe158f, 0xa3e75b96, 0xcc3eb02a, 0x19cb590b, 0xa9f9589f, 0x36f17f6e,
-	0xf37b3db3, 0xb5fb58b6, 0x530cd76a, 0x56f8497e, 0x9bc5fb53, 0x17ea99e7,
-	0xd5312eb5, 0x6a59682f, 0xfd0bcfca, 0x8efed4c8, 0xf54c2be5, 0x635fafdf,
-	0x62adbfaa, 0x6b7f2983, 0xfb5321f0, 0x98b6ca5b, 0x47076dea, 0x68e4077d,
-	0x9e22ebd5, 0x3ee0bdfd, 0x9bd82f75, 0xee12dc17, 0xed447e73, 0x33839015,
-	0xb4815ed4, 0xf478ff73, 0x2c1ea9a7, 0xf9a24d87, 0x2d5598ca, 0x0997a099,
-	0x6572cfea, 0x24d0aac2, 0xd7b0178a, 0x9b887ca9, 0x041d1215, 0x0f724cce,
-	0x318b771f, 0xa9971df5, 0x7d054cdf, 0xb17adf7c, 0xdd797e23, 0xd4c379d6,
-	0xaf6a7e38, 0xb02192dc, 0xce5975ce, 0xb569189f, 0xb1a73ce5, 0xeb817dbf,
-	0xe9856ad9, 0x19bdea83, 0x86736193, 0xe223e5fa, 0xf9ec9b9d, 0x0db0223e,
-	0x53feb048, 0x98861f81, 0x76aa6bf6, 0xfbe49ae5, 0xe11121ec, 0x409d05aa,
-	0x5217eaf5, 0x72028d60, 0x35923d16, 0xa1c0346b, 0xef4055af, 0x75c54fec,
-	0xe9436cfd, 0x3fafd836, 0xf4c010d3, 0x4c3286a3, 0x3104354f, 0x02a1b0fd,
-	0xf50d93d3, 0x2c347698, 0x86bdf4c7, 0x36efa610, 0xbbfa60b4, 0xdf4c5686,
-	0xe98cd86a, 0x4c610d1b, 0x4c741b3b, 0xd1e8790d, 0x0f6e01bf, 0x84d71b1b,
-	0x2e7cc3db, 0xe73da98d, 0xf7ff70c2, 0x11f3fbbc, 0x7f9fef60, 0x6cfb8ecb,
-	0xcacbe1fd, 0x51d3fd6f, 0x3ca57b47, 0x639d083c, 0x8133bd6b, 0x2369c9d1,
-	0xec1c64a5, 0xcff4ecff, 0xc4bcc7cf, 0xfd84f52e, 0xfa713c33, 0xfa5d7885,
-	0xf444e9e5, 0x949982ee, 0xfe1ea71e, 0xf7e822af, 0x607fac02, 0x71111c07,
-	0x6dd1261d, 0x95d7a07e, 0xe1784de2, 0x2f1059f7, 0xbf83d73b, 0x8b882cf6,
-	0xd8a8ab5d, 0x3b36f9ff, 0xf9d2f881, 0xcfbc2e03, 0x36d8fe75, 0x32e3c82f,
-	0x3d8e189f, 0x6b4d6147, 0xb761d922, 0xe736efc9, 0xa50ab7cf, 0x689a1e78,
-	0x0347b389, 0x3861a95f, 0xe0d9d20f, 0x67e8d4c3, 0x71c14f99, 0x65caecce,
-	0x5e7e3371, 0x424eec83, 0x277ea57e, 0x869fffb6, 0x0c7ebfa7, 0x23690878,
-	0x5e08381f, 0xdb98bb71, 0xf97efb7f, 0x814cfa49, 0x20392af8, 0x82f60e7f,
-	0x1177fe9d, 0x6122651c, 0x2eb7e8de, 0x63ec8622, 0x69b77ca0, 0x669dfa3c,
-	0x7317f4f8, 0xe6b7c52e, 0x042234fb, 0x9c46bf68, 0x80fe0aa4, 0x02f530f3,
-	0x788cabc6, 0x6ee49749, 0xc6f4c611, 0xbc78ea4b, 0xa1d1c6b8, 0xb9d16904,
-	0xee4bdcb6, 0x38699e9f, 0xaf39c2a6, 0x02ab470a, 0x64454fce, 0xb9e80954,
-	0xd2ab6d73, 0x12ac1ec0, 0x2f15dfcf, 0x67679b7e, 0x6125bd71, 0x8ebcdbb9,
-	0xb420fe72, 0x1d9ca35f, 0x8a9f7472, 0x31b59fc9, 0xefdadb3b, 0xf6c0fb04,
-	0x1f776a2d, 0xd683769f, 0xfbb54f17, 0x3e30553f, 0x5c53112e, 0x7bdfc0c9,
-	0x9d82604a, 0xd772a9e2, 0x7e8f68fb, 0xdc468724, 0xd4fd097d, 0x9f6e7e77,
-	0x88727ce9, 0xf338c3b4, 0x8881f227, 0x743bcb76, 0x15f8fd3d, 0xe4db9d99,
-	0xf67b80e7, 0xfebef995, 0xdf9b9e02, 0x84e78556, 0x8ff7de3e, 0x242dff68,
-	0x81d22f01, 0x1d8116b4, 0x4ad88e79, 0xc8e74f01, 0x31f1de6b, 0x3a95b874,
-	0x05ef404a, 0x863b662d, 0xfca6bfda, 0x7ce6cde2, 0x06999939, 0xa37ca4fa,
-	0xce02c24c, 0xb37f54cf, 0x177ec55d, 0x5826fa93, 0x8fee2557, 0x348957cc,
-	0x9ad5ea84, 0x34567f67, 0xb411c28f, 0x88c83f33, 0x66492cbf, 0x4a656076,
-	0xc27d8158, 0x7fc6da0f, 0x832006f7, 0x7104dc3d, 0xfc489228, 0xfc5f483b,
-	0x56fc295e, 0xbaf58d78, 0xc3881c4f, 0xe212ee21, 0xdad603ee, 0x86cf6e05,
-	0xe7c03d30, 0xc705f86d, 0x7615f92c, 0x2452de7e, 0x9cfdd022, 0x12d908ea,
-	0x851fdeb1, 0xbb5edc78, 0x7106957f, 0x7b6ac0fc, 0xdfdc6f6a, 0x0f649768,
-	0xe159f962, 0xf73c72d5, 0xf00b4520, 0xef8f21de, 0xc41f9c2b, 0x9c016f04,
-	0xdc40f523, 0x3a75ce1e, 0xdf215bbd, 0xf3c0a9e4, 0xef20751f, 0xbc7bbfb4,
-	0x9c418ed3, 0xa35a41da, 0xbb5fe53a, 0xa01fb2cf, 0x902ef399, 0x5067d04b,
-	0x09a2e780, 0x235cb9c6, 0x7e3cedcd, 0x2e31fe73, 0x4381748f, 0xdf39ee3e,
-	0xe14770e6, 0x2899093c, 0xb7f1ed9d, 0x63dfc072, 0x56fdc3f0, 0xcaa77f68,
-	0x7df2d7da, 0x9edf3bdd, 0x097c9e9c, 0xa5f7547d, 0xeb31c240, 0xadd49d48,
-	0x7dd61f00, 0xd7f96129, 0x5d1a9bd6, 0xe6f46355, 0x59f04a2b, 0x27a604fb,
-	0x8e813e01, 0x64dfbb13, 0x027087bd, 0x2f4261f8, 0x386d7c3f, 0x7f498852,
-	0x8f04a7bf, 0x6be383c5, 0xd3ebeff7, 0xbbe009ff, 0xf3feb1ff, 0x11dff4fa,
-	0x679afe0f, 0xd10becf7, 0x17f2b5f5, 0x10e1780f, 0x6b52c7d3, 0xacef9c1a,
-	0x0bdab1de, 0x1491f972, 0x3f5d02f2, 0xef718b0e, 0x0c3ba6e7, 0x70ddd3be,
-	0xf396b08f, 0xaf9f99dd, 0x2ff836fb, 0x5590ef9f, 0xb2ec0f8c, 0x2994ed47,
-	0x3096db6b, 0x7f65d8f9, 0xf19be59f, 0x7edd53bc, 0x7ca8beb3, 0x0d3481fc,
-	0xb885550f, 0xff451cff, 0x7ffb76a0, 0xabbb034c, 0xdea3748e, 0xe3077eb3,
-	0xf68c997f, 0xb1253cc0, 0x0e71bd6f, 0xa5e38eab, 0xde1d6dae, 0xbb6baf13,
-	0x9a1334f9, 0xad3bf40e, 0xbb7055df, 0x9f30e1df, 0x42f034df, 0x5feeccc2,
-	0x0583c4f5, 0xceb853ef, 0x2bc57f6e, 0x29f2c7e4, 0x23e77fd3, 0xa5fb1e0b,
-	0x755cbfd6, 0x6b18fd52, 0xb4eb1b5f, 0x2bfb9fb6, 0x2d5a5807, 0x0fe0bd47,
-	0xf1916f56, 0x9ef57bbc, 0x861f3b6d, 0x76dbccf8, 0x7fda70ff, 0xde979ed5,
-	0xabe69eb8, 0xa653929e, 0xe1b869b3, 0x9f41a29e, 0xf2dffa3a, 0xa8f4bd71,
-	0x4525fa7c, 0x7fcacd1b, 0x974bdc9c, 0x290ea7aa, 0x7c5f7464, 0x521c894c,
-	0x85b67ed8, 0xa7f7913e, 0xeab15f81, 0xd0142f89, 0x141f1f5f, 0x1c767a48,
-	0x09796e7c, 0x13c063ed, 0xabd393d2, 0xf6967e87, 0xa82e9475, 0xb2f42d17,
-	0xaf98fbb6, 0xc42fd007, 0x3f7f29e3, 0xb7d84bf9, 0x0fdd9df9, 0xf278a878,
-	0x9f30bc9f, 0xe33d52d3, 0x4ead9ff3, 0x1520fb83, 0xc54d2872, 0x3c579594,
-	0xbfe403fa, 0x907fc7c5, 0xeac5cec6, 0x575cfc19, 0xd173cc06, 0x9e707323,
-	0x7c8824e5, 0x7633f158, 0x4482fccf, 0x238a9f4a, 0xd839f727, 0xab7a763a,
-	0x4f11371d, 0xfb0242c3, 0xe189af18, 0x640f181d, 0x607f0de7, 0x65913fec,
-	0x60e0bf98, 0x30e45af4, 0xa5d1f1ee, 0xb77f9624, 0x9d03b737, 0xd3d50cce,
-	0x475c8e21, 0x87c710a4, 0x2bf69170, 0xce9a9f1e, 0x52681dcf, 0xea8eff11,
-	0x0e5029ff, 0xdd65dbed, 0x8efa6059, 0x1deecc5c, 0x3e3e4eff, 0xec013b85,
-	0xd469d3d7, 0xbf338c1e, 0x9d630e03, 0x0c5676a6, 0x3bc8c59f, 0x6bedff93,
-	0xf21bbc98, 0x0a519e1f, 0x609d9ff5, 0x81df0472, 0x8ae142fd, 0xa1fd63a6,
-	0x07ea02d9, 0x93c6893b, 0x9732edf3, 0x95bd7373, 0x12fc285f, 0x7c3dc7ac,
-	0x2324e303, 0x2dbed01d, 0x8fbf48df, 0xae30abd5, 0x86bf6fb7, 0xfae62f1c,
-	0x1f45ad60, 0x07524790, 0x2d5b7fb4, 0x0c3e7787, 0x35e54bf2, 0xcafc81a4,
-	0x27c15ef8, 0xf1bc8fbb, 0x9fb72a3d, 0x35b90c44, 0xdcab55eb, 0x409dec56,
-	0x27edc9e2, 0x2b893f6e, 0xae3cb4b7, 0x903bbadc, 0x7ad6ff9f, 0xd3e3c0d5,
-	0x7a1a3c16, 0x5a7c3fb2, 0x1db7e4f5, 0x493d5c5a, 0x45209dff, 0xe0d1f97d,
-	0x2aff8343, 0xcf06a5ff, 0xa9f0f50b, 0x7c3d87c1, 0x9f61f06a, 0x8f09a478,
-	0xe1bbfad6, 0xc0853a6f, 0xcfc63273, 0xfdb00fab, 0xd1ddfa67, 0x2f888521,
-	0xd239971d, 0x4a48747a, 0xc96c3e6c, 0x75ed2c47, 0x69603e4b, 0xebe4b41f,
-	0xf7abed4d, 0xb9d8511f, 0x9da9a89e, 0xe4a7fcb8, 0x01f13883, 0x6baa1d63,
-	0x010954fb, 0xf1bbb87f, 0x0925797b, 0xfe5e2079, 0xf2f188bc, 0x26e38a2e,
-	0xeed74e3a, 0x608f7c6c, 0x57c593b5, 0x2f6ed4ba, 0x93ab93d8, 0x553bbe58,
-	0x683d0269, 0x593b7794, 0xd02bafdc, 0xb18a4ded, 0x203fdeef, 0x08ef1ea2,
-	0x7e78d293, 0xa140de28, 0xfd20edf8, 0x80fdb3d5, 0x61d7b02e, 0x30ac84bc,
-	0xd154e3f0, 0xe21cb59d, 0xde22ad35, 0xe2b85b6b, 0x239c2f16, 0xfb903ae9,
-	0xbe5a329d, 0xdb22d7e8, 0x52e90ca6, 0xf81f8c46, 0x9a6d0911, 0xf5fec024,
-	0x059fe47a, 0xb85f9807, 0x797c7d70, 0x95dfe4a8, 0x4054efbb, 0xee7f52ef,
-	0x87beec64, 0x23c54fd1, 0xff03f296, 0x15a6e5c8, 0xdb951fe3, 0x1e41f5cd,
-	0xe4ec183f, 0x92c7bee7, 0xb77fdcb1, 0x9e0fdec5, 0xa77fe62a, 0xeba7d28c,
-	0x3ce04898, 0x2203f9c1, 0x6efce7d2, 0xe3007e76, 0xbf01d7fc, 0xe7b12b77,
-	0x7c82cea9, 0x1ebfd55d, 0xefccfb3b, 0x3e06ee8b, 0xc14ef7da, 0x767a694f,
-	0x7e23dbdf, 0xdf67f905, 0xf4877acc, 0xa0e53f6d, 0xba55f713, 0xff907a0e,
-	0x4dff9ebb, 0x7f90ddd6, 0xecf18ece, 0x145f83ae, 0xad753f00, 0x1e8057b4,
-	0xefe7e2ec, 0x45ff3d56, 0xbfae0741, 0xa9c7488d, 0x9f4fe64e, 0xef5ff03f,
-	0xf381fdc1, 0xc0ace807, 0x42e838be, 0xa5fbaaf9, 0x5d6fe313, 0x14517fcf,
-	0xa5fc27eb, 0xfbe5a9f3, 0x521e5d9d, 0x4be017b6, 0x7544fb62, 0x1b6ebabf,
-	0xd3512fbc, 0x40594876, 0xf0bca7eb, 0xafd002a7, 0xdd997b5d, 0x3c7729d4,
-	0x8179fb0a, 0xca340f35, 0x209d5e94, 0xff698364, 0x0128de6b, 0x978bea39,
-	0x715c613f, 0xfc58f8a0, 0x043e0d7f, 0x4f3fe99d, 0x29854c18, 0xdef8ff07,
-	0x0e27a03b, 0x8d2f91da, 0x59127ef9, 0xe5ccf681, 0xfff4dde6, 0xe885bcdc,
-	0x03bde640, 0xefe13de6, 0xc0d7de77, 0xbed4a1a1, 0xcf97d072, 0xf30bbf9f,
-	0x847e3c7b, 0xfefc8077, 0xfcf9dfd2, 0x7bee98af, 0x97bddd29, 0x7f87f79f,
-	0x9feef3e7, 0xcb9ebfee, 0x79c2aee9, 0xfe17ba98, 0xa95df084, 0xfe12939e,
-	0xbfbde5be, 0xfef61bf9, 0x35bf9b5a, 0x93cf1b27, 0x70b0c03a, 0x40b6667b,
-	0xc8ed7178, 0x9dd82a99, 0xd5ef3f62, 0x7e60484c, 0xf7b02895, 0x1650c821,
-	0xcfdc240f, 0xf80d6382, 0xdd9b880e, 0x4ddc933b, 0xc9137768, 0xbc53aedf,
-	0xbe7abdac, 0x911acf1f, 0x21056f71, 0x8fc9399f, 0xbf8b6ef1, 0x5d1028d9,
-	0x74aef6a0, 0x818f37f5, 0xb48f23df, 0x9805ed45, 0x33690fbe, 0xaaca638f,
-	0xdc87f262, 0x53bce6f9, 0xbcede733, 0xf061073f, 0x0c247c3b, 0xd4716cf1,
-	0xd3ce1561, 0x02256389, 0x4938a54f, 0x0efc086b, 0x7dfccfbb, 0x7ee10252,
-	0xc7865fef, 0xa716048a, 0xed718512, 0x9471e03a, 0x78dce30d, 0xe2f11b48,
-	0x08baf7c7, 0xf17baff7, 0xf80ed4da, 0x663fc094, 0xd5fa17f6, 0x12d3fb84,
-	0x691a42ef, 0x76e69dd3, 0x2cbe8fdc, 0xb25d189d, 0x969d39aa, 0xd062e899,
-	0x4c7d0e21, 0x7cf03174, 0xd2b1f4a5, 0xebff8ac5, 0xf75f1813, 0x2e832f47,
-	0xef1d6e99, 0x7fdcc9d7, 0x133f0128, 0x820199f2, 0x7fdcabfb, 0xbc745290,
-	0x7eaa24a7, 0x7e0097bc, 0xe01a945c, 0x86deef2f, 0x3f73a4f1, 0x00dbff7f,
-	0x44afd54f, 0xebf8a0e2, 0x5121eddc, 0x2b0a5ef8, 0xb6569fe0, 0x404fb889,
-	0xacd168a4, 0xc3627d98, 0x85faa80f, 0xb953e707, 0x4e9e1ed7, 0xf7dcafbf,
-	0x61da0141, 0xcfd1bb2b, 0x605cfd09, 0x14750f74, 0xa5703ec0, 0x2b11fcc4,
-	0x6049acbf, 0xcfb396f1, 0xae20cab9, 0xe762ec23, 0xb7232b7f, 0x7398f6c8,
-	0x9904a14d, 0x739e9bc5, 0x3d085ea1, 0x28f9e021, 0xdcf62f80, 0x9c87e1a9,
-	0xf060427d, 0x9df197ed, 0x4f5dca98, 0xaa7c4275, 0x1fbb2df2, 0x5dbaf8cc,
-	0xc87ee29f, 0xf1ec5f94, 0x2e1fa076, 0x7d12e29a, 0x44bb01e2, 0xb6da8fe4,
-	0x6843f41a, 0x36a2f91e, 0x2beffdc2, 0x7eab57f4, 0xb83efcf1, 0xf4f55670,
-	0x7f885ee3, 0xe1df699d, 0xaec0b8c5, 0xfae7c74b, 0x3591fff8, 0xd6ffffdc,
-	0x3b4f7669, 0x067fffbe, 0xf176a0fe, 0xfb9609d3, 0xb106bbab, 0xb44914f7,
-	0x71ef52e8, 0xf0b9ed55, 0xcfafc428, 0x51e4fdee, 0xcffabb80, 0xfc14787f,
-	0xa9d0720a, 0xba827dc2, 0xf18ebf9f, 0xdfbbe33e, 0xf9d03d70, 0x2f18e3c4,
-	0xfa9b7ced, 0xe75ff41f, 0xc0b3a7f3, 0xea7ceccf, 0x4f10698f, 0xa9f9f3b9,
-	0x9dce6ef8, 0x27494ccf, 0x9189f471, 0x0786ff02, 0xd2b5af10, 0x11db48ed,
-	0x51ce7ff4, 0xd9ff83ba, 0xd489d713, 0xc69978b0, 0xe3bb39e3, 0xc4fbc7c7,
-	0x7d66da6f, 0x4842c6e7, 0x0646bf65, 0x4139c710, 0x006639e9, 0xe3cddc74,
-	0x5d6f9175, 0x0e738e32, 0x3af4a0fe, 0x85e3a16b, 0x3d8f45b6, 0x836d750c,
-	0x44e38dfa, 0x233f8007, 0x413fbefe, 0xe40122ff, 0x60bfef68, 0x37e80cfc,
-	0x73b84e9d, 0xd82c85cf, 0xee48f8bf, 0x85ef8b9e, 0x21576f3c, 0xfcf9511e,
-	0x9d4f289b, 0xf8c71ccf, 0xf071e136, 0x8ff3d24e, 0x99f92bc5, 0x1eedbacc,
-	0x74e1ff16, 0xe690f880, 0x071e72c5, 0xc46d7c62, 0x0b8bfa87, 0x73b1718d,
-	0x40bec627, 0x7877f6cd, 0x6e97a5bc, 0xd7a044c2, 0xcfdc97fb, 0x02a0f030,
-	0x8d8dae1e, 0xc38fc67b, 0x2d3dc4f5, 0x427a0374, 0xae27b3bc, 0x7b13d849,
-	0xcde16175, 0xcef47178, 0xda5e2c2d, 0x8f3fc729, 0xaf41c465, 0x9fe25976,
-	0x3fc581e1, 0x2b8f372f, 0x9760d3c5, 0xf15afd86, 0xf8abf675, 0xae5bfdfa,
-	0xe85f9d81, 0xdaad7f77, 0x3de61f7c, 0x05dd3825, 0xef6d6bfb, 0xa7cf042b,
-	0x2b73b374, 0xf967be7c, 0x3fb3d3f9, 0xd62e3117, 0xfa823914, 0x8c3faadd,
-	0xbc2b57fd, 0x6b787077, 0xe3f5b3f7, 0xd84f5eec, 0x7b39fb4d, 0xebe439f8,
-	0x63efddda, 0xaee8ee5c, 0x988e95a7, 0x8fd616f5, 0xce7ccc70, 0x80a8793e,
-	0xdfe379c5, 0x3171ab1b, 0x40eeb37b, 0x76ea71fc, 0xa71a6a7f, 0x9851142a,
-	0xf1e9701d, 0x2dfa48ce, 0x7699dfd0, 0x3a4ddf19, 0xbee31113, 0xc9701c17,
-	0x95a11f7c, 0x475d0fc9, 0x71c09ef1, 0xf0a77f76, 0x573c04b5, 0xd2f1e77f,
-	0xb7fde077, 0x8358a93b, 0x82b6dfdd, 0x4fdb69f1, 0xef4021f4, 0x13dfe3b6,
-	0x07dafd61, 0xffb18df8, 0x4fd44e8b, 0x50fd50f1, 0x10a06ef4, 0x77aad5d8,
-	0x66cb7dae, 0x938e9f82, 0x2342eb0e, 0x83ee07ed, 0xbc39b9c0, 0x569dee57,
-	0xaa88f00a, 0x7d0a754d, 0xf9bb21e7, 0xafde557d, 0x21ef9aac, 0x6bc6af90,
-	0x266f8fd0, 0xcc664b8b, 0x9f165232, 0x87f7190c, 0xabc213ca, 0xaf7f7ce8,
-	0x28bb3706, 0x8d9e7c5e, 0x78112fd9, 0x06a26a27, 0x2e63d3f6, 0x4bc1de7e,
-	0x83bcecbc, 0x7aa3643b, 0xf6ff61fd, 0x9e08930d, 0x7c06d867, 0x819e73d9,
-	0x2f800b44, 0xea7d768d, 0x321de72d, 0x5a2a13e1, 0x17338722, 0xfd5025ee,
-	0x77866ab2, 0xf11fe42b, 0xb2cdf7b0, 0x3821f748, 0xdb8db0df, 0x1560d9a3,
-	0xe77df6e7, 0x6fbeebec, 0x78a53296, 0x853f30e9, 0x535ff5d3, 0xca7c5ce1,
-	0x0d4fc52d, 0x2d856951, 0xa3dc1a63, 0x78bc7949, 0xcfcd066c, 0x34f4ff5f,
-	0xe2f7ffac, 0xff3459b1, 0xb20e7b93, 0xcf012afa, 0xaeb0bec1, 0xeff01a76,
-	0xd9fb96d7, 0xb9663314, 0x77f0057f, 0x77eef02e, 0xae706917, 0xefe15ba2,
-	0xdda00465, 0x7f0c89d0, 0x9f77ee99, 0x98657f02, 0xf00563ad, 0x7fcf63eb,
-	0x16f78491, 0x2aa1fbf9, 0xdce15469, 0x789a2d15, 0xf3e712f1, 0xccfbbcfa,
-	0x498dcbf5, 0x3f8177c1, 0xbc8de79a, 0xef1d1a6f, 0x0e718ae1, 0xf2d00e76,
-	0x829aa34e, 0xe9c85d74, 0xcb3df84a, 0x8b3e7c45, 0x02c290c5, 0x7f5caddf,
-	0x5751ef19, 0x1ef4578b, 0xdbab8735, 0x67fbefd5, 0x3378007f, 0x007f8293,
-	0x3fdf59fc, 0xb815c57b, 0xe519f500, 0x5c7de25f, 0xeb333de3, 0xea4468bb,
-	0xfb3efb8e, 0x5a2efe56, 0x9bfef07f, 0x69ba283b, 0x682f39ff, 0x39518f7b,
-	0xf150b31b, 0x31cfd1c3, 0xd2fd0bcb, 0x0426c220, 0x1fa71076, 0xf788cf3c,
-	0xb822ee1f, 0x1765db5f, 0xbbaff074, 0x7d4549fe, 0x3a70b99e, 0xae5d5ffa,
-	0x339c08ec, 0xc35bbaea, 0x018a3d7d, 0xe869e401, 0xf828c481, 0x3e1e5487,
-	0xe7c3c8b7, 0x8f37fe66, 0xdb5175db, 0xa9fd81df, 0xa06a3fbc, 0xed8bdcc5,
-	0xee9e9912, 0x8e10d06a, 0x087424a1, 0x8e81fdd6, 0xebe6e397, 0x46cfa737,
-	0x9eeb9e9b, 0xee1ff880, 0x28ffc18e, 0xcc74bf77, 0xe63a3377, 0xd1d0e3bb,
-	0x7bdd6efa, 0x6858e0ae, 0x28fcba77, 0x7d675fbe, 0xdf4aceaf, 0x21f5a93a,
-	0xed2b3b78, 0xfeb8a7c0, 0xb31bf418, 0x29d22c7c, 0x00939e86, 0x3e07318e,
-	0x06bc01b5, 0xe7ec1f1d, 0x9ba9793c, 0xf1d673ad, 0x063acad2, 0x9fb4e307,
-	0xf74cd6e5, 0x451c0a0e, 0x69ca897e, 0x87c58dba, 0xb7efb6fa, 0x9d4b9cff,
-	0x59502cf3, 0x73ff14bf, 0xfe064f00, 0xfbf3756f, 0x7ff17dea, 0xf8a3b43b,
-	0x3fe61dbf, 0xbbcffc00, 0xfb0dfe14, 0x87eb8abf, 0xa29fd82a, 0xda1ff47c,
-	0x3a1cb4cc, 0x8dd134ee, 0x8764b072, 0xd931f7c8, 0x3e865ffb, 0xfd5d7259,
-	0xb917b821, 0xf20267e4, 0xfefe42eb, 0xfdfc27e5, 0xc1b9eb4b, 0xea10b2f2,
-	0x1f9fcbcb, 0xaa3ea30c, 0xff2e65da, 0xbbcf7767, 0xde785997, 0xad352417,
-	0x2b4ebdf7, 0xb9bbcffe, 0xb4e858de, 0xd72f7bc5, 0xdbd68748, 0x33cce74c,
-	0x83f4f4a6, 0xa6cfa0fe, 0xb8f189bd, 0xc409957f, 0xa5297413, 0x2019de10,
-	0xf4094285, 0xd7e5cc5b, 0x72d86fe8, 0x1d9ffaf3, 0xcc43df32, 0x43df316d,
-	0xbe6ade1c, 0x66d57887, 0x51c43df3, 0xc43df361, 0x338d766b, 0xae4747e5,
-	0xb31fb537, 0x3f29b27f, 0x534dfa36, 0x66c7f1fb, 0xda13f29a, 0x7f6a67bf,
-	0x4df35bed, 0x5475d7f5, 0xf86fea9a, 0x7f299968, 0x9b3ff763, 0x311747da,
-	0x61b878fd, 0x5bdc1179, 0x7872f030, 0xa15362a9, 0x9b08e97c, 0x9e5b105a,
-	0x90056ba6, 0x7fe0e916, 0x532f27f5, 0x8a2a3f1c, 0x898ba75d, 0x536fd26c,
-	0xd47ce61c, 0x8f7dfe6d, 0x35722c97, 0xcb527ea4, 0xbc1d9a08, 0x63cf0f24,
-	0xc63af953, 0x01b1dbf5, 0xa0dfb7ea, 0x9b46d57c, 0x2f956f20, 0x9a01bde3,
-	0xad8fd886, 0x1f9f77b0, 0xd4f99a72, 0xf95e8fd7, 0x0738db9d, 0x53facad4,
-	0x264bc6cb, 0x3fca3139, 0x172d8c2a, 0x73c74f16, 0xabf5fd40, 0xb35c16f8,
-	0x3bbc107d, 0xa3530f3c, 0x16cca9bc, 0x67dfdcf7, 0x7fd0bfee, 0x8ec7dcda,
-	0x7cf00cfa, 0x26daf7ce, 0x7b56bf38, 0x51fa377b, 0x5e337619, 0x5decf37a,
-	0x479e0363, 0xac3e481a, 0xb6fdc6f7, 0xebe13445, 0xd177ce36, 0xe0d333db,
-	0x3f66419c, 0x87a155fe, 0x1b47ebe9, 0x042cd742, 0xe98711c2, 0xb456795e,
-	0x39f81a6e, 0xeb79f8c3, 0xe7f8b64d, 0x0c3c92a0, 0x48a0e92f, 0xdd505ec1,
-	0x2b9c2f68, 0x4f0bd77f, 0x0f68dcc7, 0x38e87926, 0x17b4c7f3, 0xbad4fbb1,
-	0x5ee8e67f, 0x947d0db8, 0x026c0ee5, 0x93e592fd, 0x17dd9688, 0x83dbf49e,
-	0x788ef02d, 0xefcdb263, 0x00b77cc6, 0x4c7fd9e3, 0x5e3a20c8, 0x84459fe3,
-	0x75f0f1af, 0xeec83e78, 0xabb8c7ae, 0xcfc24f31, 0xe6711809, 0x89d9be0b,
-	0xabc6cf80, 0xe107ee7b, 0xdc17907b, 0xf7e876c1, 0xc71946c2, 0x982c9c6d,
-	0x4b798dea, 0xf78dbf9b, 0x6cdcb2be, 0xde74e5de, 0x933db700, 0xa8f8d5c1,
-	0xae113240, 0x28f4bdff, 0x5cfb35f8, 0xc507def8, 0xc7c010c7, 0x73fb3d39,
-	0x3a79319b, 0xee419aaf, 0x9ed16bad, 0x4ea7ef89, 0x8fa1e637, 0xe33bd134,
-	0xe2fc332a, 0xc6fd1946, 0x3c6e4945, 0x886e10ef, 0xe79afa72, 0xf99be4df,
-	0x5c295b9d, 0xf8884eab, 0xd1d6b6de, 0xfd28f4ba, 0xe5cdbcae, 0xf17d6b0f,
-	0xf0634e7f, 0x7ba7f852, 0x4f36de40, 0x79e3f9c3, 0x31ff806a, 0x0d9c3c81,
-	0x452c17fc, 0x236c183e, 0xc7d36fb0, 0x7930f04e, 0xd951ed9e, 0x72be357b,
-	0x85be8726, 0xfda76cd7, 0x5dfa7995, 0xb0f36ff7, 0x4f36ff75, 0x72ff759c,
-	0x975707ef, 0x54851fb5, 0x37b445d4, 0x111fa908, 0x3d53476b, 0x1bfd0e56,
-	0xc7f13179, 0xff6fd005, 0x65bf9a76, 0xede5f644, 0x80cfb034, 0xecfb0d0f,
-	0xaed98f4e, 0x3fbbd18c, 0xfbbd30f4, 0xf4c0cf43, 0xfda18fee, 0xe345efe9,
-	0x4aa935da, 0xb4f7bd7c, 0xac1fdd87, 0xe7821553, 0x0fd9fb03, 0xdae5c9d8,
-	0xd6feef3a, 0x1ff9cba5, 0x4f832e39, 0xfcfefacd, 0xf4112d31, 0x4207ca54,
-	0x86b777dc, 0x3c6dbf2c, 0xad9b6bd0, 0xf7cc3378, 0x78fe1667, 0xf59f4d68,
-	0x18f1cc2b, 0x6ac78b8e, 0x099b478a, 0x973c3b8f, 0xb6bf0fb0, 0xdf30afbe,
-	0xf8e4e9f3, 0x09bf7aa6, 0xeb373bc6, 0x6b8822bd, 0x1cf9ced4, 0x1ed7fef5,
-	0xaebccca7, 0x1d397e18, 0xa1e00567, 0x799fd673, 0xe303ae7c, 0xb99eab4a,
-	0x58e2112a, 0x7a0d9335, 0xaa7df044, 0x4839f9f3, 0xecfb7397, 0x2e79c03a,
-	0x3d139d99, 0xa3daefb7, 0xa4f8f710, 0x2c7258e1, 0x793dcf7d, 0xfda648bc,
-	0xbc7bdb9d, 0x7703c248, 0xd43bd361, 0x5b7f1735, 0xdef77014, 0x37e1e84b,
-	0x368f5b07, 0xe57c593a, 0x37173841, 0x6abfda86, 0x7a65f212, 0x285eed9a,
-	0x1dbf1d17, 0x395c21fc, 0xa62fe63f, 0xd04ab259, 0x7ec11633, 0xee373cd3,
-	0xc972f967, 0x9dfa6cc8, 0xe387ad12, 0x6af9c4cc, 0x04efc098, 0xf1444eb8,
-	0xef3c02f7, 0x3ef86076, 0x02b243f1, 0xbdffc29e, 0x78093c1a, 0x09ab3a4f,
-	0x77c41a89, 0x471e6e8a, 0xd30a6953, 0x3ab7ddbf, 0x848cf7f0, 0x53aaaf05,
-	0x3cdafea8, 0xdd8efd93, 0x920b63f9, 0x55691fc0, 0x0df2de99, 0xb463e1eb,
-	0x6be7078b, 0xe6231737, 0x40577c75, 0x921d1955, 0x8a6b6c33, 0xf9c78c35,
-	0x25fe98f3, 0x3dff1a52, 0x1eb7ca29, 0x1c43a6cd, 0xc5cef8d8, 0xfc522bbf,
-	0x7803cebf, 0xf0fcdb46, 0xabfb8f4e, 0x92ca386f, 0x28ccfb69, 0x945e5fbe,
-	0xc39de1c0, 0xfbef07de, 0xd345e34e, 0xd4b5187d, 0x27b74efc, 0xe214b4d0,
-	0x6defd0fc, 0x8bcef8c9, 0x38a29eb9, 0x0bbb9691, 0x0aaee5cd, 0x47e18f9a,
-	0xf6d677eb, 0xae925f86, 0x37f63832, 0xbf0f1038, 0x79fd506c, 0x340e8f94,
-	0xb07f30f8, 0xda34c341, 0x0fcb1230, 0x2f31f837, 0x986cf4da, 0x7faffa4f,
-	0xeebb1490, 0x9d54efc2, 0x75c3e18c, 0xf9ade472, 0x88df8f80, 0xaf15af88,
-	0xdefe478e, 0x3a8e9a34, 0x7367bd86, 0xfefec632, 0xd257f2e9, 0x0d5f284a,
-	0xd3afd1f9, 0xefc3c64a, 0x17f3b096, 0xf63a4170, 0x257aee1e, 0xe093f9a0,
-	0x34c63477, 0xfbc2863b, 0xc95bc1a4, 0xfd239458, 0xbbf089c5, 0x6c337b0b,
-	0x949a7eb4, 0x07f8ecd7, 0x64deab80, 0xe7e7afe7, 0x6c9f1f33, 0xbce3afd6,
-	0x0a66ff4c, 0x71bce3c5, 0x537e09f8, 0x39acfd00, 0x3307b9c6, 0xbf54891e,
-	0xeb8a76e1, 0xdfb3efe6, 0xc754485f, 0xf7bde1fb, 0xcec35ecd, 0xbec5f7a9,
-	0xff99bee7, 0xe1e2440e, 0x29176825, 0x103bf63e, 0x0f7b0a29, 0x4d930489,
-	0xe5cdedef, 0x0606ccfd, 0x1f57d09a, 0x15fde6cf, 0xfb0e791d, 0x8897df83,
-	0xf087eff5, 0xccd8c3df, 0x3574d3f5, 0xed4dec50, 0x5bd4676d, 0x7759ebbf,
-	0x0bd1216d, 0x890143f6, 0xed04bd80, 0xd4bb698a, 0xdc02030f, 0xd7ce33ef,
-	0xcdf80b3e, 0x93ddfdef, 0xebc3027d, 0x8a7d3c93, 0xd4494eff, 0xe3079813,
-	0x123c16fb, 0xca7603da, 0x6206bb3e, 0x8fe47452, 0xf8947ef8, 0xe701c53b,
-	0xbc0f53fc, 0xd9e5eecf, 0xbf38143a, 0x7c5bd2b8, 0x4551c413, 0xf3033ea5,
-	0x816f4ef7, 0xfa9e83fc, 0xdda3d887, 0x1f0137c5, 0x06f7f3a4, 0x01000408,
-	0xe1aa080e, 0x43fd638f, 0x64654eb3, 0x2bf2cc9f, 0x873637bd, 0x3f5f2132,
-	0xf208f80f, 0x7dbfb48d, 0xc021c149, 0x86e16e47, 0x423763e6, 0x037f68de,
-	0x5789ffb6, 0x3b8ffe65, 0x4af60d98, 0x79a55e4f, 0x625e4c4f, 0xa960e279,
-	0x239abf31, 0xd073c47f, 0x3bd807b5, 0x6607a95d, 0xd4cf3008, 0xff1033fd,
-	0xbcb7d5e7, 0x878c342b, 0x04eb608f, 0xf41b978b, 0xa6e1ee30, 0x79f783d9,
-	0x9d61f863, 0xc4c76cd7, 0x0fbc27dc, 0x1fd3ddf0, 0x36cbaf8f, 0xf74a9ef6,
-	0xc6efd88f, 0x547b030d, 0x86b9b884, 0xa3dc2e69, 0x70c1fea7, 0x98395c12,
-	0xcde35fd6, 0xb55e3a41, 0xa9cdfb3b, 0xa75f2f5a, 0x80772964, 0xf8b54e3e,
-	0x3f5cd935, 0x7f8b508f, 0x372b4893, 0xf0b5c10a, 0x8f686c9e, 0x937de2ac,
-	0x4728195d, 0x228eb967, 0x5f3183f5, 0xcbbfefcd, 0x476b832b, 0xc4591e81,
-	0x76556ef4, 0xdfa658a0, 0x8d973d57, 0xf0670bbf, 0x2452555d, 0xf7bb9c6d,
-	0x3791b75c, 0x21e4477e, 0xef09d5b5, 0x5afb18f2, 0x6437fbb5, 0xc7fd3ec1,
-	0x3b46de87, 0x36624971, 0x76d359c2, 0x69df815c, 0x7ca36da9, 0xd8fbbf47,
-	0xa3c763d9, 0xc887f25f, 0xbe026fa0, 0xc368d0fe, 0xd9fdddcb, 0xfd522f55,
-	0xea85d3a6, 0xd3038368, 0xd5fd7a9d, 0xf09c0ae0, 0x49c9b82e, 0x1cf1e9f9,
-	0xeafe055d, 0xf51eb7bc, 0x3a8ae3d8, 0xd3aff80a, 0xe066c3fb, 0x9124aae7,
-	0x5f0febf3, 0x7ef8f3d6, 0xb9efcd3d, 0xbfa6edb7, 0xa160df68, 0x7ba9fed9,
-	0x41fc8dc4, 0x02df92ed, 0xb66ed51f, 0xb3fd6085, 0xbef1da39, 0x1be82773,
-	0xfbe65fd4, 0xa6051b99, 0x5873430f, 0xf772fa1c, 0x74be2b34, 0xfd8c7091,
-	0xe99124bd, 0x84290aab, 0x5f1576fb, 0x2ffeb17a, 0xba69c71f, 0x1c77da0f,
-	0xe31bd637, 0x838ef754, 0xf6fd527c, 0x5fcff461, 0xafb0dabc, 0x77ffd475,
-	0x61cfc53e, 0xe874f538, 0xd0d941e7, 0xa4cfd427, 0x1ee78678, 0xf9243e79,
-	0x47a97908, 0x2e6dacff, 0xf6fa04c9, 0x7eb313d6, 0xb74a25d2, 0x3e781297,
-	0xc9737f74, 0x13ed38a4, 0x8c73ed2c, 0x7fb14ffc, 0x3a0f3c2b, 0xda0ef37b,
-	0xbd93fa5e, 0x6df00f27, 0x4bfa59b0, 0x86dfc636, 0xb7fc19fd, 0x65fbbbc7,
-	0xa5e9ef78, 0x10f140a4, 0x2068df66, 0x15245b87, 0xc0d1877f, 0x3ebe1ef3,
-	0x8d797c55, 0x78bdff09, 0x9f95302f, 0xfb4cd06e, 0x2e178ba1, 0x7b3f7bc3,
-	0x41563af8, 0xdb3eec42, 0x7da6b923, 0xc70fffd0, 0xb8a385d7, 0xfe4a381f,
-	0x328c70c6, 0x385e81e9, 0x5fe54df2, 0x69310e17, 0xec366976, 0xa1b1ad53,
-	0x0b66909f, 0x6ec07239, 0xf7ec5ffb, 0x0734201a, 0x61a899e7, 0xce57da6c,
-	0x079f6039, 0x448e79c6, 0x40e3498e, 0x056d749e, 0x913f53ac, 0xe5a1afd0,
-	0x8619390e, 0xfde1d56e, 0xd8952a2b, 0xb0754e5f, 0xe6f51986, 0xab876277,
-	0xe5a258a4, 0xb879d5e3, 0xdd94e5ee, 0xfdf60755, 0xcfe17736, 0xbc931357,
-	0x5ab27da2, 0xc7f68a58, 0x9b17c49a, 0x3d38df61, 0x0233d981, 0x58f9b179,
-	0x267abc46, 0xbdf72daf, 0x31c41378, 0xaed4aeb6, 0xab6e7f06, 0x0c391c33,
-	0x6e3df9eb, 0xdcaa3dfc, 0xf816e175, 0x83710abd, 0x314bd70d, 0x2b6bbc29,
-	0x6078179c, 0x8bec1f84, 0x40d760ad, 0x5c6e35fb, 0x421a5bff, 0xe2af2f68,
-	0xf5f6c0eb, 0xe7385493, 0x9296e8dc, 0x916bbd61, 0xb8056feb, 0x64efba5e,
-	0xd03ae3b3, 0x4196fe63, 0x80cbef3c, 0x71cb4d75, 0x14f5e58c, 0x68575b19,
-	0x3485c183, 0x44ffc3f2, 0x33d412ad, 0x6b0ed127, 0x04ab2f74, 0xbfd68e3b,
-	0x7a78a0ec, 0x85e3993c, 0xe8f4e7d7, 0xa0cd93a5, 0xbd15c507, 0xef3a12f9,
-	0x7a633f1d, 0x3fda09ea, 0xe7452bbc, 0x18778213, 0xe84947bb, 0xc1242587,
-	0x74d0c76f, 0x9dfb0e74, 0xbd17aa5b, 0x3849c7e8, 0x491f635f, 0x0f7ec519,
-	0x7ac3da1d, 0x83919093, 0x0cca98fb, 0xe2835ef6, 0x66fde371, 0xdd5677e3,
-	0xb3a7f8c4, 0x67df2978, 0x43de5971, 0x895fae70, 0x784ee99b, 0x4f862137,
-	0x0b7bcb15, 0x07cc0912, 0xcd544b7b, 0xe449bfe5, 0xd8834afb, 0xb70eadef,
-	0xa32ed085, 0x35e98452, 0xd9f68a24, 0xf981d268, 0xe66de031, 0x0d2c35c2,
-	0x278d8e2f, 0xbbe2c8ba, 0xc7ec1101, 0x788d5bb4, 0x44f5f04c, 0x96bfdeba,
-	0xfc36e3c8, 0x66538c77, 0x7d7ee214, 0x5fab1266, 0x0fbbc815, 0x338dbcec,
-	0xc69c61a6, 0xf58cefb0, 0x16dfb0d2, 0xab579872, 0xc17b5c42, 0x3a16ebb0,
-	0xb6753e59, 0x8868e0fe, 0x0b53b66b, 0x2fee1b34, 0xf96af8b3, 0xb034e2e6,
-	0xba1e16cb, 0x4ce4ed15, 0x8b65d995, 0x8250ce36, 0xdadee1a3, 0x8a07f43c,
-	0x84484c37, 0x4ed5847d, 0x8575e27f, 0xfbe267e8, 0xc7b503b9, 0x355da6b6,
-	0xab71e419, 0xca90128d, 0xeeb24bfb, 0xb17c0b1e, 0xcced0f21, 0xc6c109ad,
-	0xd6efda24, 0xabfcd67f, 0x4ea7fe68, 0x8c38f0bd, 0xd5813ab3, 0xc051bbc3,
-	0x12e73d9b, 0xc9bbe1b6, 0x3d6f8dfd, 0x1252f097, 0xa8ca7f7b, 0x7e536fff,
-	0x80007d7c, 0x00008000, 0x00088b1f, 0x00000000, 0x7dbdff00, 0xd5947c0b,
-	0x66fdf895, 0x666579be, 0xf263c992, 0xc2130922, 0x9e4e5e4b, 0x124c2280,
-	0x4cb443c2, 0xe8202a10, 0xa79034f0, 0xbadc5d48, 0x30040cff, 0x5706b650,
-	0x84ea2b11, 0xbbaac562, 0x351ba341, 0xb88080ea, 0xda446dd6, 0x8ffd16d2,
-	0x4810154a, 0xfed2b58a, 0x39cf65dd, 0x7cccdef7, 0xb5f01993, 0x3efeb4ff,
-	0xe7ddf7ee, 0xce73df79, 0x12e973bd, 0x2c614dfc, 0x5630a494, 0x51c1d8ca,
-	0x618cf58c, 0x24dea98c, 0x064dcf06, 0x34e2d26f, 0xa37efac6, 0xf5e1bb67,
-	0x926f6617, 0x25d8c6c3, 0x79fa2ed1, 0xa0b199aa, 0xcdb3b189, 0xc11c166e,
-	0x336699d8, 0x1f966b95, 0x9fa0c698, 0xb9850e9a, 0xc55b19f2, 0x3f6336da,
-	0x69923baf, 0x3d0155dc, 0xf4648e0b, 0x5bfe0977, 0xd528fcbd, 0xebc9dd5f,
-	0xaa0eb2d7, 0x4f3192bf, 0xf76b3c07, 0x1cd0595a, 0x51df5fae, 0x4a1f69ac,
-	0xd7bf51d2, 0x3b06fb25, 0x5bdd8c9c, 0x2abefc3d, 0x5d569f78, 0xfae1f662,
-	0x13e38e58, 0x87afa8ab, 0xebe63af7, 0x77aeb188, 0x49de5c04, 0xac4e8a82,
-	0x32b1d0ed, 0xe03ad6c6, 0x1ec62e9f, 0x6c7cd850, 0x15f7f6b7, 0xc2632919,
-	0x9e2ad6ed, 0xf898c70c, 0xa8bc6a70, 0x88d48167, 0xc467dab2, 0x345e35f5,
-	0x0ef3fbd2, 0x63075fb3, 0x3ff4c91e, 0x7fac2d70, 0x1953eb26, 0x909f53cc,
-	0xcd5d8e38, 0x71258b58, 0xba673e37, 0x08a17d0c, 0x53333038, 0xf8337e71,
-	0xc4ebf62b, 0x71944769, 0xed403ed8, 0xa98ed967, 0xc473400c, 0x8303735e,
-	0x90b037f7, 0xce060aca, 0x28fdfa0f, 0x2359dfb2, 0xdd1be5b5, 0x09ecf2da,
-	0x7e6332da, 0x9a4fd782, 0x1a4eca9b, 0x04fefdc2, 0x0311d6a6, 0x5802b72e,
-	0x5eed7eb1, 0x0464e04b, 0x923beb1e, 0xaec6e535, 0x88c9c0ac, 0x1ff16a71,
-	0x135ff059, 0x589d775f, 0xdf4607f7, 0x5bc00ead, 0x71190b3d, 0x46c140dd,
-	0xacc658ef, 0x7c45e616, 0xf16fd81d, 0xcfe812b0, 0x00b76e66, 0xabbb1b7c,
-	0xdef02595, 0x30ef876a, 0xe196273f, 0xfaf03569, 0x0e88058c, 0x39da8fe0,
-	0x5bed99bd, 0xb713e415, 0xcdfedaab, 0xff00dde7, 0x4f0293dd, 0x24ac3d95,
-	0x0ea3ac46, 0x5e1e91d6, 0x07eb39c7, 0x582f8865, 0xa5ec6fcf, 0xa6461748,
-	0xf3d78524, 0x5cb5e1ad, 0x5dc6af0b, 0x1837a236, 0x1844bde7, 0xcea761a7,
-	0xceb2846f, 0x7e4463dc, 0x3ce917b9, 0x1c72de06, 0x6f3c4c4a, 0xe0c73c43,
-	0xfcaceda7, 0x1cc7e43e, 0xc7181fe4, 0x6527eeb6, 0x8f818b27, 0xfa1737aa,
-	0x054dbea0, 0x547186fe, 0x08a9bff8, 0x6d3bd9c8, 0xe9d03255, 0xc3e73b29,
-	0x7a2e890d, 0x0abc50ee, 0xe75d35e2, 0xd5fa47c9, 0xcc43b827, 0x66a3f1c1,
-	0xcb601942, 0xf962c1ae, 0xefe81ebd, 0xcb1b9821, 0xf0098416, 0xcbc2c878,
-	0xefca392f, 0x6ee308dd, 0x0de5e64a, 0xd5b9bd3f, 0x16ca093f, 0xe5439e59,
-	0x416d0c87, 0xffdde03d, 0x44f5c982, 0x28f7b53e, 0x32305e58, 0x4d4c04f0,
-	0x2365843f, 0x4226a65e, 0xf4b720e7, 0x9b769a2f, 0xeed05ea0, 0xa78427fb,
-	0xfb39ff5c, 0x26363cf1, 0x4d7e7f66, 0xacdf797f, 0x53bf183f, 0xfbf87577,
-	0x419dc4d4, 0xc2e76f3d, 0xe7a72c76, 0x9ff43f03, 0x6d89a2fe, 0x0623e285,
-	0xda179b76, 0x632c5dd5, 0xd43908c1, 0xb679f023, 0x5b7241d9, 0xf943afbe,
-	0xa9f9063d, 0x7d70e487, 0xfe46aa47, 0x7f5cb94a, 0x7f4d5af1, 0xc27c8e39,
-	0x43dabd57, 0xe2feadf2, 0x121efa64, 0x736cf4f2, 0xf889e926, 0xc8d20ce3,
-	0x1338f0f5, 0x72f8b059, 0xefa24ce3, 0xcbe61c72, 0x06bdb922, 0xa4240ce7,
-	0x87bc8237, 0x750c2e71, 0x465f2525, 0x0276d99f, 0x67ac4591, 0x63341a9b,
-	0x07dcdbff, 0xfc18be1c, 0xb844e520, 0x1edb51bd, 0x811b23f4, 0x4863edf4,
-	0x7aacffb7, 0xd4fa91cc, 0x5038f066, 0x8af6a86f, 0x34372e23, 0x86647e4d,
-	0x5169280a, 0xd97f3d39, 0xd1e881b6, 0x411f706e, 0x3aeddafc, 0xafbe1f97,
-	0x483ce9b7, 0x730e2d27, 0x51bdf100, 0x7281c1b9, 0x076bf643, 0xb8f38f31,
-	0x7a421b60, 0xd57ade3d, 0x0f54898b, 0xa9199266, 0xc6f7ff1f, 0x0f17c583,
-	0x31bd8f1c, 0xfa0b88f1, 0x6e744b57, 0x910be00b, 0x1d0471fa, 0xdf63f744,
-	0x779cc6a9, 0xff093d74, 0x8436f8b8, 0xe7fe1112, 0x8119ba6d, 0x4d2ef318,
-	0x9e9bbe56, 0xdf25145a, 0x3c3b7f93, 0xd095ed88, 0x49f20a0f, 0xa32696fe,
-	0x90bc2dfc, 0x3922e958, 0x73b5ee9f, 0xb6e385b1, 0x7d9a8ed8, 0xed988fa4,
-	0x3ebfd913, 0xb849fd3e, 0x64aade18, 0x04601f88, 0x4ae37a86, 0x412bb070,
-	0x1597e22f, 0xd3e50caa, 0xa76f3a40, 0x77d7f4f9, 0xeb11e743, 0x0edd516f,
-	0x75fd6ba4, 0x99ca331e, 0xe6398ef5, 0xaa379410, 0x20f9d9ae, 0x02defa87,
-	0xb7d6127b, 0x1cc8ad29, 0xc15a8f8b, 0x2df9c46e, 0xd669d64d, 0x1d669f23,
-	0xf7e8dfe7, 0x9eb9925b, 0xb13fdd68, 0x9f1253c7, 0x79d2407e, 0xcb9b8f51,
-	0x5856c754, 0xe7c0de9f, 0x0763896b, 0xc1e37eca, 0x0b7ecb6b, 0xa87569c9,
-	0x44f68039, 0x549b78f4, 0xbe078f77, 0xf8f9826f, 0xc7c39cb1, 0x3aa254df,
-	0x16d74376, 0x47330257, 0x4b3837d4, 0x6c17fe08, 0xdf0f4c69, 0xc63d2137,
-	0xd3849798, 0x68efe4bc, 0xe8a2f93f, 0xc3b7f732, 0x5d0d10d9, 0xcba2c6b6,
-	0x4b37a879, 0x3999fcf9, 0x9343fe72, 0x8c7c8ebe, 0x49b29ba6, 0x977c83cc,
-	0x5876cf01, 0x66caa76f, 0x807d43ec, 0x9844d6b6, 0xe636cddf, 0x393e9900,
-	0x32677cb5, 0xe7acb7ac, 0x3f219180, 0x1d693a74, 0xf47da275, 0x8e14a6b8,
-	0x838a533f, 0x3dc7499e, 0xf8014f4f, 0xb824f676, 0x99d4f814, 0x0630fa02,
-	0xbc088f7c, 0x9fc6d633, 0xf21c686a, 0xb65fac8f, 0xc3767988, 0x6b0250f3,
-	0xb2bd8335, 0xc607c84f, 0x154fe7ee, 0x99c61718, 0xdde8cafd, 0xf58a2f64,
-	0x80b5021f, 0x43d3d3f5, 0x77fd14e3, 0x585edbc0, 0xeade047d, 0xdbc221cd,
-	0x6bdf46db, 0xe3c69f08, 0x772c74a1, 0x87933d1e, 0x70b670f8, 0x25efb5fb,
-	0x6ee9006b, 0xd3d67e20, 0x0e2eeafc, 0x81e2fe62, 0x8353ab78, 0x2eeb5fa4,
-	0x5877d1e6, 0x129cdfb7, 0x6c1b3efe, 0x2eb00986, 0x4270e666, 0x47c2c4f8,
-	0x896be0bb, 0xa3eb500f, 0x081f02ed, 0x3ec48fa7, 0x4eef1fa7, 0x780666e3,
-	0xefe66b3f, 0xdf246799, 0xfe7d0987, 0x005e4251, 0x0d1f33f7, 0x7a46ce07,
-	0x91e95d50, 0xe2cea77a, 0xac3e6fb9, 0x67abbd9b, 0x5963c04f, 0xed15ada5,
-	0x4f2665ab, 0xcb5dda12, 0xeb2bd3de, 0xc48409f3, 0x3c042b07, 0x5df732cf,
-	0x36ff3f88, 0xc209e38b, 0x97ff769f, 0xf8bca3bf, 0xa2bf681d, 0x9346ef4b,
-	0xcda56971, 0xf596fd8f, 0x876d3c54, 0xad5b2bf7, 0x2efd062e, 0x04fee29b,
-	0xf765bded, 0xf21b5c59, 0xa438bf71, 0x5dfa0b3c, 0x03be60fb, 0x9d7581e5,
-	0x06ecd337, 0xeb7ee093, 0x6de02b4c, 0x8964b293, 0x7dac0852, 0x1516ca7f,
-	0x57feacf0, 0x281667e5, 0xc17f755f, 0x8c75f316, 0x1cb282bd, 0xd0ff59ed,
-	0xfedf6899, 0xf646a712, 0x7f6fb72e, 0xca274479, 0x82a65bc5, 0xece5180a,
-	0xce60d9d4, 0xb78a532b, 0xf4fc6198, 0x0ea14f14, 0x32935bc6, 0xb7f62661,
-	0x7fb1bef4, 0x77df09dd, 0xa99acca4, 0x44de13e6, 0xcaccef7b, 0x926ed0a1,
-	0x54b3cf2c, 0x56697f42, 0x27a7b616, 0x090fbf00, 0x77f68f8f, 0xbdfdbf67,
-	0x1cd4e660, 0x53454bc0, 0xbffd0aa5, 0x96db729e, 0x36315731, 0x877281fe,
-	0x983fc607, 0x15a664b2, 0x9469dff0, 0xf16d97f5, 0xcc9d58c0, 0xbe0186f7,
-	0xbafef1ff, 0x9fa86699, 0x742dea96, 0xcd53fac0, 0x91996ff7, 0x65f81dfb,
-	0x4fbd12a4, 0x1271482c, 0x90461cdf, 0x33ebade6, 0xf82afd72, 0x71d3873d,
-	0x9424797f, 0x4ce511ed, 0x10dcee5e, 0x4e9c7e5b, 0x33b972e5, 0x8f77f621,
-	0xef004b90, 0xb3e90ea0, 0x96181acb, 0xc027961f, 0xc409e64f, 0x3cb9db5f,
-	0x639abe01, 0xd98e3e27, 0x5fe537df, 0xd3f53b80, 0xe8ac7aa9, 0x0d7290bf,
-	0x71c56666, 0x69764cbe, 0xcf5975e4, 0xbfb79252, 0xeb7c154a, 0x5671f0e2,
-	0x330ae56a, 0xb8470cf7, 0xc58b76c8, 0x4b47f33a, 0x88d052ff, 0xe2d6b9fc,
-	0xacf9c0c9, 0xc19e57dd, 0xd787632e, 0xf8d72c5d, 0x98ebc24b, 0xf407ef4a,
-	0x44b9fd0b, 0x5f31eeff, 0x57c95e07, 0x7d1a5780, 0xc33ad2bf, 0x3bfd69fd,
-	0x7ee3fb03, 0xc57a019e, 0x1b9e7b18, 0x415eb853, 0xe422ebf8, 0x5f214ada,
-	0x3d916a41, 0xabc5fe7e, 0x8fcd6f76, 0xf503771c, 0x7a7df80f, 0x412fee0a,
-	0x2b1ca2be, 0xb0b33d53, 0x8a4f597e, 0xa079ed03, 0xde828db7, 0x8937a454,
-	0xa694cee7, 0x76ef5a72, 0x863bb1c5, 0x3913f81d, 0x83c536af, 0x22c649f6,
-	0xc4497e9f, 0x87fca4fc, 0xff453bfe, 0x1f9e9c25, 0xc5e7a7ed, 0x2fc23fc8,
-	0xdf40dcc4, 0x5fce0763, 0x08ce36c1, 0x2582f5fd, 0x7091f380, 0x2ff4b6fb,
-	0xb8ba87ed, 0xda912a7a, 0x260f1c65, 0x219ea0ba, 0xb9f9c5c5, 0x6bc4e3e3,
-	0xe9755f51, 0xebe2e299, 0x2651b946, 0xe7bfa4e5, 0x764a8548, 0xbb2e584c,
-	0x72919ec8, 0x87366833, 0xbdbfdfeb, 0x9446c667, 0x2fbe26ab, 0x1483d34f,
-	0xe3cf0a2f, 0x2fae14e5, 0x2798f827, 0x24781d96, 0x08e52ed9, 0x75e1e3ad,
-	0x5863ec95, 0xd7e85d9f, 0xf93f2109, 0x664c9eb3, 0xf0e13ec2, 0xb67bfa90,
-	0xdcaff429, 0x47a5a64f, 0xa53b0659, 0xee105741, 0x89cfbf1f, 0x8263fba0,
-	0xf3f1a20e, 0xc013e55d, 0x48708fc1, 0xc872e14d, 0xed056509, 0x17f4150b,
-	0xb55cffc0, 0x3f35bdcd, 0x2e36de62, 0x1d7a9d8f, 0xe0576397, 0xfe54b48b,
-	0x3b25efbd, 0x1e1873f1, 0x2ff98edc, 0x1d76f701, 0xc17dc1ab, 0x09f01d21,
-	0xaf8da2d2, 0x598bfcf3, 0x29e7efd4, 0xeffeb93a, 0x1bb72e45, 0xd7ce3c61,
-	0xbfd63f64, 0x3b5da83c, 0xdcdfde7f, 0x658f4e54, 0x68853dc7, 0xdaf30cc7,
-	0x285fb8dc, 0xc07399eb, 0xdde1e500, 0x4b6b038a, 0xc1de1f3a, 0x4ba814f9,
-	0x67ade5c0, 0xa5b5fb22, 0xbefa3a72, 0x38fc31d6, 0xcbc457a7, 0xcd3e08e2,
-	0x7871b54d, 0x084cfac1, 0x472b554f, 0x9bfbf3e5, 0x0180f787, 0xf0075bd6,
-	0xe12db140, 0x64b1d9d6, 0xf8f90583, 0x1f237338, 0xa258ef9f, 0xdd788b1b,
-	0xebbec8c9, 0xf00f0f97, 0x147b4875, 0xe903b2e8, 0x5cd4eaf2, 0x71d86f1a,
-	0x7c0c758f, 0x1376861f, 0xec3b95fa, 0x4c57dc01, 0x4dcdf54e, 0xedce7845,
-	0x4a2064ab, 0xeb4dac1a, 0xfbef112d, 0x7d4177eb, 0x7e9f63a2, 0x36f3ce2c,
-	0xc2bab6c6, 0xfaa981eb, 0x6f5a1fd1, 0xa02d3e04, 0xd6e11072, 0xfbf5e469,
-	0xcf8a3316, 0x8cfbe834, 0xf7f41df8, 0xa3cfa22c, 0x2fc414ba, 0x6ed09bee,
-	0x737bd3ae, 0x67d7dc14, 0x07a8dc98, 0xf4421f60, 0x54c2c87e, 0x26fff40b,
-	0x574e513c, 0x8fd8efe9, 0x502aaaf0, 0xae242ddc, 0x60dc85da, 0xcd37dc41,
-	0x7a25629e, 0x39dd5f64, 0xbff51ab4, 0xfa09e395, 0xcc7e8b31, 0xff30a2e6,
-	0x2aef3afd, 0xfd48ffda, 0xa8514876, 0x8dd7439f, 0xb112ddde, 0x50fec22f,
-	0xaa521ffe, 0xfa40ee73, 0xb23afb17, 0x7ac2d30f, 0x2295ed17, 0xfdde245b,
-	0x3ca17e62, 0x7b48a3a4, 0x7ed3ed14, 0xb1dfd67b, 0xd9c83a65, 0x823a33f1,
-	0xd152073a, 0x01ff33f3, 0xf60551d6, 0x70e005ac, 0x33972a5b, 0xfafdf287,
-	0x30df9c44, 0x3abc3f58, 0xd31be09c, 0x938f0b64, 0xe90ffc2e, 0x482fee46,
-	0xbfcfe04f, 0xe73b72a7, 0x1e5c6927, 0x978d21fe, 0xfb6313d3, 0xf510be2b,
-	0x1f971354, 0xfcb9cb5b, 0x41b7ae8f, 0xedadfbf4, 0x668a31de, 0xef760f7f,
-	0xf76e5486, 0x885fb91a, 0x0a9613c7, 0x873b06fa, 0xabb614f0, 0xda503c78,
-	0xccf45fa1, 0xf372f2a3, 0xbfe8d97b, 0xe69fedbf, 0xb6f487dd, 0xf27a37f2,
-	0xf1149c57, 0xbec99582, 0xbfdc64f4, 0xabf6c427, 0x75d6273c, 0x1f9199ba,
-	0x1b8c53f8, 0x893dec82, 0xaf284371, 0x34e0f9da, 0x2cd5bfe4, 0xe5e0fe40,
-	0x5c51373b, 0x61407970, 0x69f7052e, 0x1627ee5e, 0x47bd58f8, 0xdf4bf1af,
-	0x931936ae, 0x77e984c7, 0x6e369b45, 0x58abb358, 0xf6f6fe53, 0x440b2569,
-	0xfcb0a1c8, 0xa3ef4699, 0x1ef495fb, 0xd47ea76d, 0xc3f8d2ec, 0x461cee97,
-	0x97f597eb, 0x77ad3731, 0x66816b59, 0xf395acde, 0x49f9bc49, 0xd4bb45ba,
-	0x469e731f, 0x008ffbcd, 0xff08fefe, 0x4353d2ff, 0xa92d1e69, 0xba40ffbe,
-	0xcac3cf09, 0xdabf1afc, 0xb027c724, 0x7ee16656, 0xff23a049, 0x5081ece5,
-	0x6fffa72a, 0x71d1f70f, 0xfee305f6, 0xca0beebf, 0xcc397126, 0x0c3614da,
-	0x6aa7e31e, 0xa0bfb4ed, 0xa7c52bbe, 0x616beb95, 0xa45f2d47, 0xd45177ad,
-	0x5dea28bb, 0x6912bfc9, 0x2805299f, 0x0d7f78d7, 0xcff38f82, 0xa0ba351c,
-	0x6e34f8de, 0x3d3916c7, 0x6cef5097, 0x438e24b3, 0x4b36ca7f, 0x52f5005e,
-	0x38bafaff, 0x48336d1d, 0x033b8a3f, 0x5ffed6e1, 0x88a8b677, 0x0fb07dc7,
-	0xfe587900, 0x8a1641e8, 0xae375390, 0x01cb3c53, 0xef2176de, 0x7d7cdcea,
-	0x71a0ee75, 0x5d93f428, 0xd395e7c7, 0x23515fb1, 0x08d4e5da, 0x419a5f7f,
-	0xc1cccfb3, 0x8d254e32, 0x9a9ce3cb, 0xea1432a0, 0xa3daef65, 0x875fd8a8,
-	0xbb337a42, 0x41130009, 0xdc25d957, 0xa4b1b9be, 0x2636595d, 0x5d56870c,
-	0xe00718f5, 0xeadd35a7, 0x8f737d46, 0x0d2437d3, 0x182279e7, 0xf8fcedc4,
-	0xda2a3d13, 0x7a753fef, 0x619cd20a, 0x8ef4b838, 0xd6a7d46c, 0x6d9e7c13,
-	0xae63fbfd, 0x4da22867, 0xdcddabfe, 0x23b3d19e, 0xa487db8c, 0x8c37d2af,
-	0xe727bd24, 0xf4229e97, 0x3df33a45, 0xadfaa367, 0x68c9f08c, 0x861be93d,
-	0x2cf6e6ef, 0x815577c7, 0xafbe0f77, 0xa8aab8ca, 0x6c17de05, 0xa14baa0b,
-	0x62bbcbdd, 0x85cb83fb, 0x4c75813e, 0x75c9f5c2, 0xc82e495c, 0x7e38867a,
-	0xd60fc90a, 0x1ff7b119, 0x2f7d2230, 0x216d347f, 0xa36eb7ce, 0x30949991,
-	0xf4ea7ffc, 0x64f9c6ce, 0x082bb477, 0x93dfe91b, 0x1dff4ae3, 0xfcfe477e,
-	0x96f928c8, 0xfe5c5fd3, 0x2cf7a75f, 0x1b67948f, 0x6927848d, 0xc7e7873f,
-	0x69d5fded, 0xeabecf5c, 0xf9c12ef4, 0x276d7434, 0x3daacf7f, 0xf9631a1f,
-	0xe2f9a3ab, 0x6a54704a, 0x6ea0bef8, 0xeb8039be, 0x25547f2f, 0x68dda83a,
-	0xdd5938a4, 0x9fb8fb33, 0x46e61ee7, 0xb1d75139, 0xe30e594f, 0x4fb33ed6,
-	0xd7011159, 0x05017541, 0x2ec233e7, 0xafcb90f9, 0x3f47ba68, 0x872dda32,
-	0x9c4e5c2d, 0x15f9b72d, 0x8359eb80, 0x9deb0eaf, 0xfdbab2cd, 0xbc3c61f9,
-	0x11fa6fb9, 0x3fb037cc, 0xb3e20a67, 0xd33bb755, 0x475af50c, 0x5f48dd19,
-	0x36fa753f, 0x54525c23, 0x4fb6276f, 0xd7bbb34e, 0x89975b43, 0xfbbca115,
-	0x1f1870ba, 0xefe32745, 0x85d3fce1, 0x91db8872, 0x813fc845, 0xa7b4bb34,
-	0x361dae48, 0xc73c75f0, 0x9eff7cf8, 0xe89079ea, 0x8d0a48f8, 0x54175d9b,
-	0x7f9d9fd0, 0x6b9239e6, 0x9d30ffb2, 0xe4891e79, 0xb3cf2bdf, 0x56f488c3,
-	0xf950e42b, 0x8f947ba3, 0x4bfde623, 0x6e91f430, 0xba019fb2, 0xfdf7d1b4,
-	0x3ea8d333, 0xbdf0b933, 0xe16aed42, 0x79088afb, 0x4311d723, 0xf5c3ecee,
-	0x1cf44ed8, 0xc82772e4, 0xbe628dfd, 0x157cf8d1, 0x9a7c1fe5, 0xde99ea06,
-	0x3123fd1b, 0x48787a2e, 0xe527f502, 0xbedf3440, 0xe51ce82a, 0xfe46cea5,
-	0xe52bb25a, 0x22bd64fc, 0x34fec567, 0xc10f4382, 0x4a977ea1, 0x7a32a9eb,
-	0xc111de87, 0xfd16bf0f, 0x03f9b81d, 0x07fdca23, 0xa25dfdfe, 0x8536fac7,
-	0xedacf1e2, 0xd43ce35d, 0xf4a7fe47, 0xe2ce6768, 0xf1db0126, 0xa784bbc2,
-	0x2e5c9d59, 0x53ee77d7, 0x74c2d997, 0xc0e67f9a, 0xf56748ad, 0xfb86261d,
-	0xdfbfa022, 0xe9a27c20, 0xca47c254, 0xb4f878dd, 0x9472e0ce, 0x47e48df9,
-	0x3e54fd85, 0xdca429fa, 0x4eaa7bfe, 0xfbf809f8, 0x1cbc690b, 0xa7df1fa6,
-	0xdcb08f08, 0xe45f10b5, 0x603a299f, 0x5bb87dc6, 0x5a7f3f21, 0xe4678725,
-	0xc6c7aabc, 0x54ce9b97, 0x50d437a1, 0x587b1cde, 0x7fcbf7be, 0x810bfed1,
-	0xe41f786f, 0xd410d9ef, 0xd1fe72f3, 0x7277cbf8, 0xce831b7d, 0x11d71bfe,
-	0x3da4dfad, 0xc9e6e920, 0x8f46aa5d, 0xea469dd8, 0x731b0ecf, 0x728ec79c,
-	0x61d8cf1e, 0xc76cfae0, 0xe500737a, 0x780b9bc9, 0xa17d995e, 0x43cf8831,
-	0xf875a5ba, 0x1f3650fd, 0x5ba755bf, 0x0dd6e583, 0x7842d636, 0x4b3a24f5,
-	0x19127e91, 0x1e5c8f97, 0x973cf03e, 0x5b7e7567, 0xeb3fc180, 0x5397737c,
-	0xe2cd39dc, 0xf333b8c6, 0xb3ce341d, 0xd72ba40f, 0x2e8dfb73, 0x83ab3f78,
-	0x03c49ff3, 0x2fa253c8, 0xae120fc9, 0xb8727861, 0xf8927e4b, 0x67f4bbf8,
-	0xa77cbd03, 0xda3daabc, 0x46dbdc78, 0xbe4ed5df, 0x706c3acf, 0xc7869fa1,
-	0x6fd1e217, 0xb3b7baed, 0xb51d824f, 0x7a2df33a, 0xfd85be4a, 0x27bf86ac,
-	0x3817bc09, 0x74afbeb9, 0x2da9ba72, 0xacbe20e9, 0xfc44d93d, 0xe5c19b6c,
-	0x5684ed9a, 0xcff6331e, 0xa8dbbd62, 0x63b5955d, 0x5477e61a, 0x7038ae3d,
-	0x6e4f1fbf, 0xfcf0aede, 0xbd774fb8, 0x72f98891, 0xf2b02bec, 0xe1629e31,
-	0xe4eb9deb, 0x5eece272, 0x7bd13800, 0xf672f193, 0x63fa95fb, 0xc20a63c1,
-	0xfac056b3, 0x139533ec, 0xec7e84ff, 0x61ee49bd, 0x9ecfe4b0, 0x3feee9b9,
-	0xeecfbcc1, 0xf746e299, 0x978b5a65, 0x69cfa7e8, 0x037ee371, 0xf40cf7c4,
-	0x78efae17, 0x685af123, 0xabe9fa77, 0xd76e508b, 0x799e798a, 0xe10ebf5e,
-	0x7fc9e1b2, 0x6bdf8c9b, 0x09aa4a03, 0xf8fbd9c7, 0xbe63677f, 0xf2469eea,
-	0xfd3cb517, 0x17f311ba, 0xfe768174, 0x03926f7e, 0xf9fe9deb, 0xef08c9f6,
-	0xfa168e96, 0xede7e67e, 0xe4f03e54, 0x77f6bdbf, 0x1378e3f4, 0xccef58dd,
-	0x2f09fbf3, 0xf2953e75, 0xf5d1e2db, 0xb9fb7d8e, 0x8f3d44bc, 0xcb9f307c,
-	0x92d74931, 0x793f4f7e, 0xbd48c4db, 0x0ab7df21, 0x026b4e7f, 0x099f23d7,
-	0xe0adadfe, 0x9ecfcef1, 0xfda7ccb5, 0x1c343181, 0x6375c5f7, 0x2ddc5d38,
-	0x71d751e0, 0x46c1a187, 0xdf9fa9ed, 0x73e3df02, 0x27e7d02c, 0x64852923,
-	0xd7ca25cf, 0x0faa57f9, 0xbfa026f5, 0x1f45e6e7, 0xeb1f382a, 0x2d432698,
-	0xfe69f3cd, 0xf91d561d, 0x6c6d6cbd, 0x38bffb3f, 0xe02ec26d, 0x59dd907c,
-	0x3922e39d, 0x8b0f7260, 0x6bb387b0, 0x27182d7c, 0xcfad7ebe, 0xbe3c07ad,
-	0xb4e8ea7c, 0x727e5041, 0xf84c52a4, 0xcf5c2bd7, 0x4e346df9, 0x81c1fa3d,
-	0x3e0b768f, 0xf5307749, 0xdc03921a, 0x32a5501f, 0xaa7e46d5, 0xf513923e,
-	0xee0f42ad, 0x736e7e11, 0x764dde5f, 0x26bb676a, 0xed061f62, 0xf72a366c,
-	0xf310fde5, 0xe7f8674a, 0x1971de93, 0xa467be69, 0xf27e603c, 0x8b7e4a7b,
-	0xbca11bf6, 0x57d1fcc1, 0x285de59d, 0x3d33e51f, 0xefe4bf8e, 0x74b8fbe2,
-	0x15ca174f, 0xa35537b6, 0x95c9e20f, 0xe79f3703, 0x0f95fb7a, 0x901b0e89,
-	0xdf7c710e, 0x5ede8d49, 0xe815c24e, 0x890fa5f0, 0x7177970e, 0x55d0daf9,
-	0xd4fdc46e, 0x69d7e10e, 0x7484f410, 0xbfe8fb84, 0x9c69933a, 0xe1a1c986,
-	0x0bcea728, 0x12ff3bba, 0x3a43b7a7, 0x0e01f91d, 0xdedd1eed, 0x8fd40ca2,
-	0xf0978d4a, 0xe6f800dd, 0xa3daf376, 0xd7d56768, 0x6bf23730, 0x07e0a743,
-	0xbe117bb0, 0xcbd55d0d, 0x6941bfb1, 0x0ddfc933, 0x41b4c976, 0x63a86e50,
-	0xd96fc8a5, 0x425e2abb, 0x7c5d60ba, 0x035d9e3f, 0x4dd22cf6, 0x9f5bbd5a,
-	0xdb8f7a8f, 0x2c8fd7bd, 0x723bf6a3, 0xf2e7145d, 0xf38a3157, 0x19fb40ef,
-	0x68d65df5, 0x36fb3f6e, 0x5cc5dd92, 0x6537e409, 0xd60d753e, 0x622ff06f,
-	0xcd11d794, 0xb4292fc7, 0x5808680f, 0x56681f29, 0x1a7fb717, 0x9f1f38ba,
-	0x4f91f093, 0xe4adcf43, 0xc4c17f8f, 0xd0fe11fc, 0xce9a5f37, 0x268becf5,
-	0x359fb3d2, 0xb0c7d87b, 0xbc85b7a0, 0x6dac7097, 0xdd21d7cb, 0x09937632,
-	0xcc4cb1e7, 0xf5c0cda3, 0x03d0b246, 0x3cf8db05, 0x77e174d4, 0xa789d74c,
-	0xe2e79b51, 0xe17f93f0, 0xc88f189c, 0x39e85d22, 0x797eba18, 0xeea4f890,
-	0x9a5fde19, 0x677853c9, 0xfb4abd04, 0x0b1e9a28, 0xbbd9b8c4, 0x4c282a0e,
-	0xd1cd77b2, 0x35f5f9f0, 0xeb08d82c, 0x2e977ebc, 0xd91c6538, 0x9e490b4d,
-	0x58b237af, 0xd2232af9, 0x9556fdb9, 0xbf442dea, 0x36cdd576, 0xb93fa477,
-	0xb3a3c12a, 0x24571da0, 0x12ded8fd, 0x4a9d1b8c, 0x6f11bbb7, 0xd25dd2e3,
-	0x5bd8d30e, 0xdcdff703, 0xcda1bc0e, 0x1ff70e3f, 0xf309f581, 0xda09ae29,
-	0x0edcfc8d, 0xf7fb8f68, 0x9cfed7dd, 0xb85bdfef, 0x070402ff, 0x6f5499c9,
-	0x9d8ffa09, 0x5cb5de05, 0xb1ddd93f, 0x93aaf3d6, 0xcdc0e7af, 0x3ee216b7,
-	0x8dae61b1, 0x5781e1f8, 0xde9ca594, 0xbee21140, 0x83f9c7da, 0xe13c7f01,
-	0x3b247a22, 0x1bc9a1aa, 0x9c8f4d88, 0xaec01a5f, 0xe81b3b42, 0x93b70d71,
-	0x13f38c6d, 0xbfb94ba7, 0x6915b947, 0x8d3e4acf, 0xbf497be6, 0x35ff7cfd,
-	0x81bcfdf9, 0x8079e3f3, 0x3f7bd203, 0xe9ccbf9d, 0xe07aeb7c, 0x15bef847,
-	0x4225b1f8, 0x7fef47fe, 0x1fb89e70, 0x1ef6f290, 0x3a5177a7, 0x6fdda1ca,
-	0xab50c66d, 0x2f0d8f94, 0x397e196f, 0x958ccbbb, 0xf0335fa1, 0x60fd246b,
-	0x445ed68c, 0x09ea3f4f, 0xfed8baeb, 0x6dd2bb8f, 0x3f3fcddf, 0xaee52f30,
-	0x7981d2f4, 0x73a8e929, 0xadbb6f10, 0xa58fb401, 0x3e7a291f, 0x499f044b,
-	0x03fdca7c, 0xfeb021c6, 0x37ef82fd, 0x888f7a89, 0x84bec467, 0xf3a5c1f8,
-	0xf679487d, 0x6c91f471, 0xb5f97df7, 0x2f5238e4, 0x8c8dd346, 0xaa7ae0a3,
-	0xd7afc4c7, 0xcfec5fb6, 0x29f8e8a2, 0x800b5fc1, 0x6dde7037, 0xc417e086,
-	0x19d8778f, 0x99f813e5, 0x71e31527, 0x7ce08daf, 0x386fb234, 0xfa66b7b6,
-	0x92ba44be, 0x8f7c5d7e, 0x115aaa71, 0x6bddacbf, 0x7f9e4408, 0xd18337b9,
-	0xb376bd38, 0x91fc0f5f, 0x87dbe99b, 0xcc15fded, 0xf33d441d, 0x2b8a168f,
-	0x8a5b8181, 0x8591a6f2, 0xefce1112, 0x205efb25, 0x0cf7d5fa, 0x39e3bf47,
-	0xdf0e3425, 0xdafe109f, 0xfb5fc213, 0xcf7bd77e, 0x17ad02be, 0xf16e72bf,
-	0x5ece918f, 0x7d21e4b4, 0xe7f4b09c, 0xdda125bf, 0x92b9817d, 0x690e772e,
-	0x55ef5991, 0x2767fc23, 0x7ffdb1ec, 0x373c0b6f, 0x532b788a, 0xb7c3ed19,
-	0x19f97067, 0xe3c4bf3e, 0xb4ebefad, 0x1cf937fe, 0xdfe1c193, 0x501ce719,
-	0xd7df0661, 0xfce10e74, 0x50aed7d8, 0xdd66afbc, 0x41eb3ffa, 0xb5acd42e,
-	0x9f09e907, 0x71ab8ed1, 0x283a83f8, 0xb970309f, 0xcd737f04, 0x07fd6165,
-	0xc849d4f5, 0xc5077e33, 0xfd0a96bf, 0xcde9acb5, 0xa15fa1bf, 0x49e66546,
-	0xf2c71845, 0x9f041e1e, 0x4f2db53e, 0xf2bff144, 0xa3a67747, 0xd458ca7e,
-	0xa6c1f226, 0x55fed03a, 0x2fe8373c, 0x6f672f59, 0x132764a9, 0x1ede001d,
-	0x22f6f0cc, 0xe24a2f1f, 0x7745c17e, 0x08fe035a, 0xf057b879, 0x7cfd3461,
-	0xcdbce710, 0x01151997, 0xaa616fec, 0xefd46ff7, 0x7234e79d, 0xfa12bced,
-	0x5f4823c5, 0x4fddd877, 0x22f2eef0, 0x05d263f3, 0x0e316bfc, 0xb7b1a204,
-	0xbaf867b0, 0xbee3a47c, 0x5fa1dfbc, 0xf0e4dbab, 0x91bbf0bb, 0xf176cbbe,
-	0xe3f141e2, 0xd2232e40, 0x8545c347, 0xf76961e8, 0xae51c79b, 0xa221a837,
-	0x1b66a593, 0xa2e1b1e1, 0xd5a9e9ca, 0xdb243670, 0xa4d7ee03, 0x6032d27a,
-	0x277bfe9e, 0x093c5325, 0x17c389f8, 0xe39c452a, 0x37c332f8, 0xf7e00328,
-	0x36f13590, 0x305d7fdc, 0x8f3092bb, 0xf408d1ad, 0xe7753570, 0x43d84735,
-	0xa5aec72c, 0xfeb7ee83, 0x6e5af386, 0xaf5119f6, 0xd134f0af, 0x4945b179,
-	0x98c752c1, 0xd24fbc48, 0xf5fd1a5f, 0xc8497ef1, 0x3c8df797, 0x9d20646f,
-	0xcf6c3c73, 0x39b2f510, 0xc79fbcbf, 0xe7c39e6a, 0xbb427828, 0x728887f7,
-	0x170f2891, 0x7979d2f5, 0xf797e09a, 0xd17af1c7, 0xe3152ce3, 0x99e1997c,
-	0x7682708c, 0xc7d22341, 0x673a166b, 0xfe404ac4, 0x935bbca1, 0xc82c764b,
-	0x770869b9, 0x4c982718, 0x67a44cf5, 0x41c81358, 0xa96f67c0, 0xb5b3e08b,
-	0xe305e81c, 0x289aaf41, 0x2bf1241e, 0xcf8d1af1, 0x77ca1985, 0x181f4fcb,
-	0x51985ebf, 0xcd7e303a, 0x17c250d8, 0xf38c4bd1, 0xf5f0f11f, 0x03c73b6b,
-	0x0cf2ebf0, 0xb1c183d2, 0x49b37c91, 0xb5ca51c0, 0x78b413f7, 0xe39d3cfd,
-	0xbbd45ea1, 0xda1f7684, 0xe23eeed1, 0x7853f7bf, 0xae02b4fd, 0xfe5da497,
-	0x5f2e024f, 0x529f6ba6, 0xd1fb44cf, 0xe2f214bf, 0x47ee74cb, 0x8ddebc07,
-	0x09fa95f3, 0x19304ce4, 0xebd178f8, 0x6c339226, 0xd5e51f63, 0x83ffbd40,
-	0xea645af0, 0xf41535bb, 0xdec10fca, 0xbb511631, 0x0647284b, 0x48c7efec,
-	0xd433b0ba, 0x0e19addb, 0xf4941f6e, 0x48d7b8f1, 0x0ca5aebe, 0x657287e4,
-	0x210c63fc, 0x6bf0e40b, 0xc142bf22, 0x6214aebc, 0x07f61767, 0x8c97ff70,
-	0xa3dc30d2, 0xe8213bc7, 0x450cd1e0, 0xb215bc25, 0xaddbc442, 0x5f6e7eef,
-	0x139e5d0c, 0x4d9365e7, 0xe7ec76be, 0x916fddec, 0x18c27e9d, 0x8b66de1c,
-	0x7c18ddf1, 0xfc2521ec, 0xf4a7b6fd, 0x98d5e37e, 0xc1f67e7f, 0x4bdd619b,
-	0x1c6ef47b, 0x5f3de972, 0xed1e33bc, 0xc5031eec, 0x6fdf406b, 0x4dde7153,
-	0xa13caedc, 0x67c1d2d3, 0x3df76977, 0x907a0baf, 0xdca572e7, 0x157cfa91,
-	0x93797373, 0xcb1bb890, 0x3b71dd1f, 0xce5dcb9d, 0x003d87bc, 0x666bd3f7,
-	0x3b7c5d92, 0xcf5e51f3, 0x39ed56b2, 0xda6d15db, 0x073bedf2, 0x3925c39c,
-	0xfd102abc, 0x2ba5f85e, 0xf3fbeb63, 0x333f2e82, 0x7afdf88a, 0xfdf8cc53,
-	0x09fc85ef, 0xb4fbd9c7, 0x2f57fbf1, 0x8c6fbf1f, 0xed87df8a, 0x3df8e888,
-	0x6113f7ef, 0x91bf606f, 0x2acffc71, 0xa3e3af62, 0x58b7690c, 0x9f19f935,
-	0x125bb00c, 0x45e37be9, 0xd8f99c4b, 0x2b67fde8, 0xd7d38f63, 0x5f368e3f,
-	0xe79edc20, 0xb5fdc809, 0x8bc693a4, 0x6567a459, 0xe1c7da59, 0x3df43976,
-	0xf4babcfa, 0xf8be4b6f, 0x2ce66158, 0x176d47f2, 0xf29bbc76, 0xbb463f33,
-	0xba72f908, 0x4c10b5eb, 0x278fd971, 0x8487570e, 0x1d7a26f9, 0x42675f40,
-	0x98d8f211, 0xfd234f69, 0x3a6e66eb, 0xfee82797, 0xe8abbbd6, 0xbdffcf7c,
-	0x322332a7, 0x53f72a6e, 0x8f69460d, 0x96fa34d9, 0x65e3e945, 0x1d916f5d,
-	0x70d7f606, 0x7a7f3e14, 0xc3d26ef5, 0x1d37992b, 0xd5f7bde9, 0xe56e7411,
-	0x3961eadb, 0x4bfc9b9f, 0x35bf3c0c, 0x3987ec8d, 0x75373e62, 0x67503b73,
-	0x1c6818f6, 0xd239730f, 0xe7cd8b69, 0x8554420b, 0xf3fd75f2, 0x631de747,
-	0x15fcc493, 0xbdf00f6c, 0x52d93c4e, 0xdbce265f, 0x31eae384, 0x8990260d,
-	0x6e8996cf, 0x28a73e17, 0x83cf955e, 0x6b1a79e3, 0x3afac1ca, 0xd7cf4873,
-	0xc7483309, 0xa2f0fdf6, 0x37945db2, 0xeb70bdce, 0xb36f7c0a, 0x8a313c93,
-	0x04cf4c79, 0x6dfc88b9, 0xb75c6666, 0x4d3c16c9, 0xf4f133f1, 0x8f88b857,
-	0xf91843fd, 0x07581241, 0xd9b53f9d, 0xb171f9ce, 0xb050e60e, 0x085c716c,
-	0x9ce27ee2, 0xf3c7e6c3, 0x672f20c4, 0x5f3fa265, 0xc44ad5f9, 0xee67c80b,
-	0x5df78a17, 0x11f3f20d, 0x88a5de42, 0x7908b5f9, 0x8adcc597, 0xe480c7b8,
-	0x95f6fddd, 0x267ee037, 0xa3f7798d, 0x71387bbc, 0x32fdc506, 0x93e68f98,
-	0xc8d5433a, 0x5b57a72d, 0x46af98ce, 0xe7053bcb, 0xbed3e597, 0x9413b337,
-	0xbd04a497, 0x69529799, 0xfd12361f, 0x37210631, 0x3e78598e, 0xcf3166c2,
-	0x8853333b, 0x78598e6e, 0xb6b7c25e, 0x7ddadc5b, 0x3f0a437d, 0xdd3e7fbf,
-	0xc0f1c66c, 0xe113b98e, 0x07cc7607, 0xdfce167e, 0x41d29c2c, 0x6f9b0279,
-	0xe01bdc54, 0x6bbb66fd, 0xeba40abd, 0x7f70a99f, 0xc728ea8f, 0x3cf69c7c,
-	0x44f31b87, 0xf7be451b, 0xf6a38b66, 0x9a63f219, 0xb7d63d78, 0xed96e319,
-	0xac0e1d5b, 0x37d95697, 0xaafb88cd, 0x9bb1cc15, 0xaff7a0c5, 0xbe608f80,
-	0xe032c73f, 0x63f41149, 0x85bae23d, 0xefbe20d6, 0xf0177fc1, 0xdc3294f2,
-	0x82bff2bf, 0x773a42ee, 0xd27a3cc9, 0x85dd8d97, 0xbc60d86f, 0xe485b982,
-	0xf256f7af, 0x72132fb8, 0x571cbc60, 0x61b5d9f0, 0x85efa7ba, 0x5bb43ca2,
-	0x4cd37ff8, 0x80ebae3c, 0x91c4ca21, 0xc69fac43, 0xe4cdc1f9, 0x6bd3e71f,
-	0xfb0ff858, 0x4ff70cab, 0xf86a6972, 0x60ef9873, 0xbbb322a8, 0x8dea0ea5,
-	0x91fb8357, 0xcf15afaf, 0x543cf142, 0xe5e9237e, 0x65cd9d1e, 0x373e71d4,
-	0xc3aba017, 0x94b847ab, 0x60b4b639, 0x4129d73f, 0xd8cde67a, 0x9fd382de,
-	0xc94cfc23, 0x9e00c699, 0x00996b37, 0xc8bf2678, 0xffa30f9f, 0xac2fff5a,
-	0xcc74f118, 0x279ef520, 0xb9ffe789, 0x0ed53d68, 0xce97593e, 0xc22e7b33,
-	0xcf3f28f9, 0x8b74d0c6, 0xa997fef8, 0xd7974955, 0x300f3cbb, 0xe5cf4b25,
-	0x871e0ce3, 0xa66f9c6d, 0x7146e5bc, 0x7d53030f, 0xf08c3ff9, 0xc5b8c8af,
-	0x7f3606bb, 0x46fd8c5f, 0x07b7164a, 0xfdc0dce6, 0x1f228dc2, 0xcc4f7e47,
-	0xbfb27ee2, 0x377b4e64, 0x1e3dec93, 0x949dfd6f, 0x48d9235f, 0xf2115f94,
-	0x5f248fe5, 0x278edfca, 0x85dfb47f, 0x29e799fc, 0x40bed036, 0xef2921c8,
-	0x68ef22bd, 0x1018f301, 0x1ee23d4f, 0xabe5a395, 0xccdd0e48, 0xf7fef47c,
-	0x00ff3c15, 0xfd80d308, 0x6b4334dd, 0x6af3cd3f, 0x8fcf37cb, 0x3e38afb6,
-	0x7c0bb8e4, 0xa473efda, 0x6b433c9d, 0x87fa2f27, 0xcf4992af, 0xfea2fc67,
-	0x3e70e0d2, 0x3e546351, 0x27c88351, 0x3c2aec6a, 0x4f911694, 0xf3cdd8d4,
-	0xaeba1a89, 0xedc44f94, 0xb029af29, 0xde24e31f, 0xec94d25a, 0x727f910d,
-	0x8a4ff310, 0xaf6e74c2, 0x0c3cf3b0, 0xa2bca1e6, 0xce95871c, 0x8aeab45d,
-	0x9adb8fc8, 0xddf8d768, 0x5577aeb7, 0xbfe93d61, 0x4843f995, 0xc3f6b137,
-	0x5f7c59d9, 0x7ee143b3, 0x3302ff74, 0x059d3bed, 0xc15c4d5e, 0xd1c767a9,
-	0xa66ef8af, 0x3f27d64b, 0x2f830ec9, 0x019e18ab, 0x8979d185, 0xb67af6fe,
-	0x5190fc91, 0xea99ca72, 0x338038a6, 0xf5f92c69, 0x921775e7, 0x2cd9923f,
-	0xb84a61ee, 0xdb7379ff, 0x69ebcc55, 0x97576eec, 0x3774c2db, 0x43ec4b36,
-	0xf48accac, 0x7bd7efda, 0xbd7e44ce, 0x30b79364, 0x19d7da0b, 0x8bbfe483,
-	0x1f7a57a0, 0x2ede5f4f, 0xe150c5e8, 0xe602b05d, 0xd18efbd7, 0x0a6bfb8d,
-	0xcfff41cc, 0x7e4c94bf, 0x230e7549, 0x9cb1b53d, 0xf45e93cb, 0x3e3ac193,
-	0xfaf7e64d, 0xa466ac6c, 0x4ca7cf5f, 0xc55e3a23, 0xe83d8702, 0x7405db47,
-	0xd2cf7918, 0x8eb96d1e, 0xa9fe9075, 0x3d00667b, 0xf2947c93, 0xf4b99eb8,
-	0x741b8c06, 0xa1b3db6a, 0x285c395a, 0xbcf147f4, 0xff982da9, 0xf2e3ac50,
-	0x0f772d91, 0xf5fb439a, 0x2c4f8e45, 0xa17f7228, 0xebaece5c, 0x73d29fb5,
-	0xa17ae7fe, 0xad1ff454, 0x3d854abf, 0x17e41937, 0x7da56fee, 0x7ca9f506,
-	0xcfadd750, 0x59e785d4, 0xbb49da22, 0x890bea50, 0x8c09f2af, 0xbbb579e1,
-	0x1a7c84b2, 0xbe2086c2, 0x13e27fa1, 0x29583705, 0xf71fbfd4, 0xf18ad785,
-	0xa8fc1e80, 0x733afdbf, 0xb36be900, 0xd2fa44d2, 0x3c3ff68c, 0xd23e2ab7,
-	0xe35eff0b, 0x4c7d23d7, 0xdd374d64, 0x9926f500, 0xb728ac7b, 0x31fe4e80,
-	0x585a7e92, 0xa29f6f30, 0x7efa23a1, 0x98edf936, 0x5af52474, 0x9edcf7f0,
-	0x74bcc599, 0x0fe793cf, 0xa83aeedc, 0xd8267df0, 0xeed1079f, 0x93375b7a,
-	0x2c2664e8, 0x3955eb03, 0x9e9ff8b4, 0xdf472da9, 0x5ad0c50f, 0x48744328,
-	0x9c540678, 0x51bdf44f, 0x98f7291e, 0xb3e5ee56, 0xf8de78af, 0x423fc396,
-	0x1d7583ff, 0x0ef6891b, 0x8fc4aa58, 0x27b0f4d1, 0xb78f7beb, 0x118ac9ec,
-	0x7e15e96f, 0x68586be5, 0x40ca33e5, 0x687f3b7a, 0x82333e9d, 0xbc7f252e,
-	0x1379e06c, 0xae3cebca, 0xc6ccc135, 0x252e1104, 0xf928ffdc, 0xd3a41ae3,
-	0x95fd3094, 0xa487f789, 0x06cc197c, 0xd75dbd23, 0x01ea0965, 0xbfa2853f,
-	0x8afe906b, 0xdc89f6c2, 0x184cb477, 0x98f96740, 0x4cf60e17, 0xb495d201,
-	0x8e958a4f, 0xfde73c16, 0xb6f74bfc, 0xe8237ce0, 0xc3842dea, 0x8ae80559,
-	0xf4036afc, 0x147bf6ad, 0x4bfc49dd, 0x359cba7b, 0x6e677ed1, 0xc1b3d702,
-	0xcf49dbea, 0xba24b882, 0xa70e737b, 0x21e62abb, 0x5a672bba, 0x6b34a97a,
-	0x0974d1cb, 0x74b4ea23, 0x8bba23e7, 0x7478d7a6, 0x4ee91837, 0x2bd4dbea,
-	0x48e7ddd3, 0x8fc5df77, 0x3eee9039, 0xa7c672cf, 0x937a68bb, 0xc59f6cf2,
-	0x75768951, 0xfa428d63, 0xa19df8a1, 0x511e582d, 0xf6764f9f, 0xd93764be,
-	0xfc4d8ddd, 0x478f497b, 0x0533798f, 0x7cf7c56b, 0x1b96256f, 0xe877c1d7,
-	0xcf18f4ba, 0x0f7a19ab, 0xa1b85eff, 0xbfbc0de9, 0xdbcfd1a0, 0x337a7cbf,
-	0x6c0a879d, 0xdbcbed16, 0xd8dcb12a, 0x8a7fdbca, 0x31abae71, 0x82d02dbf,
-	0x96daafef, 0x6fdbe6ef, 0x114fd76e, 0x3ca7ddeb, 0x6bb506f7, 0x3f6eede3,
-	0xe4604e6c, 0xfaf6e027, 0x29ceb164, 0xd33af8bb, 0x867ebe3e, 0x4563e80b,
-	0xb9ec9f9f, 0x6575744f, 0xece2ef24, 0xb695cbb3, 0x474e7c1c, 0xbc47a639,
-	0x43f55bbb, 0x37741c78, 0x3675710c, 0xf8c8d3f7, 0x5429e621, 0x5717d847,
-	0x443b7367, 0x614f4bd6, 0xfd8d7e74, 0x72fe4ecc, 0x3e0cdf19, 0x07d414c4,
-	0x976146b8, 0x4e778cc4, 0xbb22682f, 0x1960fa62, 0x4ba90ce7, 0x4bc2dc61,
-	0xe58b4f9f, 0xe6cb2a47, 0x9129f3f6, 0xd7df2177, 0x4875f204, 0x4890fb17,
-	0x90f0fce8, 0xdb9ed077, 0xe734cc97, 0xf3e5f6dc, 0xbcecd4f2, 0x01cd6e7f,
-	0x549aeaf8, 0xe58bf7bc, 0xf2b79429, 0x4c161e83, 0xff381c4a, 0x1a0b2ae9,
-	0xcf8a0f29, 0x518b657f, 0xe5c257dc, 0x3f813cda, 0xd1186936, 0xa7815cef,
-	0x17a16cea, 0xca31598b, 0x6f0279a9, 0x1937343f, 0x336ebeb8, 0x798fc944,
-	0x1e3f28d9, 0x6bcf6b8e, 0x97c947bf, 0x4aee311a, 0x62afc761, 0xfd3fe47d,
-	0xa7f1d844, 0xfc76e61e, 0xfe41d66a, 0x719fded3, 0x961ebe3b, 0xed12f487,
-	0xabddad07, 0x6877d72d, 0xdea00dcb, 0xaec6ffb1, 0x8633b928, 0x1f7ba5fb,
-	0x3f432fae, 0x77cecd64, 0x235dffc8, 0x2b404ce5, 0xe740c067, 0x51a1e672,
-	0xd6fabfe4, 0xd819e3f2, 0xf26995d5, 0x76c9ef4b, 0x5e77f846, 0x0d2e79e4,
-	0x7a11fb8c, 0xc16f23ed, 0xd28b2c7d, 0xa572d14f, 0xe915c850, 0x5bf290ff,
-	0xc6429bca, 0x77ec14f5, 0x9b60f1df, 0xe1ef3b28, 0xc4afa16c, 0x4dfa4dfe,
-	0x88547da4, 0xd7d211f6, 0xba2226a8, 0xbf727eb0, 0xe847d26d, 0x662505a5,
-	0x19917bc4, 0xa6e11bf8, 0xd9f58db7, 0x68f1f434, 0x83f7e5f6, 0xf451efda,
-	0x0b63f723, 0x84dcfd05, 0xff181891, 0xb81f720f, 0x5ccfd38a, 0xf4843de6,
-	0x9cd5fbf3, 0xf0bee47e, 0x3d03ef9b, 0xa07dc8fa, 0xdd7e4fdc, 0xdd3f60fd,
-	0x863ec058, 0xe95cb1e7, 0xfdf1e017, 0x45d38546, 0x3ddf9cfd, 0xf2c2c556,
-	0x733368e2, 0xb97086ab, 0x8cc9a665, 0x0316977e, 0x99cd2fdf, 0xd2d97ef5,
-	0xb413f908, 0xb8401f97, 0xf9276eb1, 0xdaadeb77, 0x3d2b3671, 0xf711fd77,
-	0xc95a8f55, 0x08e174af, 0xc2e59323, 0x0f9411ae, 0xc78199fe, 0x6e7ce55b,
-	0xb5f7bc3f, 0xb95bd410, 0xcc6296ee, 0x0255a82f, 0xb7c1d62f, 0x77beac0f,
-	0x756bbf91, 0x672f7141, 0xe427c50f, 0xbafdf1b8, 0xc6c7927e, 0xf73f5c03,
-	0xdf940929, 0x4787ef0b, 0x38fee9c6, 0xdcefcb88, 0xb807df4c, 0x5b47a91e,
-	0xf827f3fa, 0x1b30b413, 0xa7ce1294, 0x704de708, 0x985fcb7f, 0x13798ae7,
-	0x04e2231b, 0xbe663ed0, 0xcf2179db, 0x01726147, 0xba6567cc, 0x7fd717a7,
-	0x4f85c44a, 0xa9e23889, 0xfc571e44, 0xfe7d7f7b, 0x7ae20db4, 0x3b8894e8,
-	0xc6d14a9e, 0x44bd649b, 0x6cd93cf1, 0x60346ef6, 0x37799ebc, 0x3d70fe82,
-	0x7ca26a64, 0x5f1c4595, 0x6b252fbd, 0x1ac811ee, 0x106a3e54, 0xd399fbb4,
-	0xe3041fab, 0x9ed36f2c, 0xf715ea83, 0xba0af6db, 0xa7f0b5e9, 0x506b371c,
-	0xd76c28f5, 0xb3df80bb, 0x289e5fda, 0xbfea5ecb, 0xc910baf7, 0x8ff2fea3,
-	0x3a9ce242, 0xf8c893f7, 0x61f8bc40, 0xfa30bc74, 0xbc74699c, 0x37e4b17f,
-	0x245fef11, 0x6ee2d4e4, 0xd5b86f1e, 0x820f36cc, 0x6775b7ef, 0x26b8fc50,
-	0x135c3fd1, 0xbf5bf7ef, 0xa4879e51, 0x9edcdecf, 0xcff8f8fe, 0xf5e3e222,
-	0x2f5a3e22, 0x5da9d7d7, 0xcf0164df, 0x3e3e31ef, 0x60739079, 0x9f3a3c7c,
-	0x33b445e2, 0xac3c610c, 0x55b87071, 0xd12aebe9, 0x39617c4f, 0x35f73ca3,
-	0x416b2d6f, 0x2d9af23f, 0x615596e2, 0x380bd777, 0xd3975bc7, 0x8d2e63ab,
-	0xb9813ebf, 0xe593d622, 0xc994d14b, 0x33c88f92, 0xad93541d, 0x34db9f69,
-	0xf07f5344, 0xef9a51ba, 0x4d22fef9, 0x1af5a0b9, 0x6d61fd4d, 0x88f29a15,
-	0xea6bd79d, 0x4921b217, 0xa23b6fe4, 0xbb125f47, 0xf347302a, 0x85def47d,
-	0xb29ff69a, 0xa0931da6, 0x7b45a75e, 0x7bf3332f, 0x8594c67a, 0x76c7a9f3,
-	0xc3f4d52c, 0x29504a82, 0xf633df0b, 0x79a7b899, 0x878f0f79, 0x5ab5dd5c,
-	0xbead4e33, 0x1d18f08e, 0x7d622def, 0x086e37e4, 0x1b20ee28, 0xd55dff18,
-	0xaeed4ed5, 0x78c8f764, 0x2241c6c8, 0xb2cd97de, 0xd3475d39, 0xc3ec8d85,
-	0xe4f4bb0b, 0xc3642c7f, 0xf0449a1f, 0x6b80b032, 0x302efe20, 0xf0bb17ee,
-	0x798ddd8c, 0xb5bfb745, 0xca63e68c, 0xde05d2d4, 0x5eb9181f, 0x5d2d48eb,
-	0x3a5addd8, 0xa5a09a48, 0x27786883, 0xc174b47b, 0xcbbff042, 0x86753bc0,
-	0xb7fe6e96, 0xf081dce0, 0x5be186b5, 0x62d3d07c, 0xbcf1b823, 0x999f6935,
-	0x1d143d84, 0x4e7690d7, 0xbbb09070, 0x2e323f45, 0x93f159b1, 0x771fd55d,
-	0x0bcc109c, 0xd53da3e6, 0xc95fb8c4, 0x6fe5107b, 0xbd24bf0c, 0x9497e78f,
-	0xc09b9d70, 0xf32d67f5, 0x663efc92, 0x93a4fee1, 0x9fc8abd5, 0x913592b4,
-	0x9cd9fddd, 0xe8efc2e9, 0xca577aa7, 0x9f901853, 0x8b29f600, 0x06aed7f0,
-	0x1fef1a8b, 0xd2a7868a, 0x78ed04ad, 0x4b75986e, 0xfca3e07d, 0xedde0f15,
-	0x68ff89a9, 0x51e65fed, 0xb497e522, 0x1278e587, 0xc9ae529e, 0x49ac4c71,
-	0x117c899f, 0xc8d8e725, 0xd693f8e8, 0x41fd239f, 0xe3238e32, 0x9bfed14c,
-	0x55b8bb08, 0xc1d2718f, 0xce782df9, 0x21e1d8b7, 0xeb29613f, 0x4fdf05b9,
-	0xa8b47730, 0xb8bfe12e, 0x2ffbf58a, 0x2babeae2, 0xf26fb5c4, 0xf247a12b,
-	0x65b3c607, 0xff961c7c, 0xf1a11ff1, 0x8b95c524, 0xf2f398f3, 0xd3d22708,
-	0xfba6bf40, 0x8fd02bf8, 0x8a97d75e, 0x3130aaf5, 0xfdde223d, 0xf5a212a6,
-	0x367990fc, 0x6fdb9e45, 0x6ed31d60, 0xe8327f21, 0xa727bc49, 0x58bbfb93,
-	0xac3db457, 0x0759bf92, 0xafba412b, 0xde711165, 0x2a77f0fc, 0x659607eb,
-	0xec95d21e, 0x82f1a789, 0xe0a3ca72, 0xc84c53f9, 0x8cffb941, 0xf993cfb7,
-	0x4f7ef218, 0x94547799, 0x1c75f823, 0x03fd871b, 0x94e595bf, 0xf8017fa2,
-	0xc7e48953, 0xfa253cfe, 0xa31f803e, 0x31f32fd6, 0xf212f6f4, 0x5c8b2d1b,
-	0x8780d7ef, 0x9c7e5bb4, 0xc8e9e8c3, 0x3eb3d171, 0x3d6fc4e1, 0x47a4b9f8,
-	0x68da3f93, 0xfa0d0d84, 0x79145e13, 0xbb5a1d81, 0x9d1c96fd, 0xf7df1b80,
-	0xf15e095c, 0xf8f221f1, 0xaebe3e04, 0xf8f3261d, 0x0c971c24, 0x0d0afb84,
-	0x8ff7fb5c, 0x115f70fd, 0x2e12ee0b, 0x7e7b4ae7, 0xdbd2f881, 0xbc23a58f,
-	0x577aa617, 0xe3dcfd63, 0x5d144fa1, 0xfa555e78, 0x7b8794b3, 0xe74f4ba1,
-	0xe3ae1aff, 0x25e1b072, 0xf386893d, 0xb38a26dd, 0x41bd74d6, 0x66d9e176,
-	0xfc06b410, 0x72180cbd, 0x08fc65d8, 0xb78ef051, 0xd9eb924f, 0xe5f62390,
-	0xef32fd62, 0x39b9d607, 0x475e6627, 0xdfb41c3f, 0xf4aa1c05, 0x1cf09263,
-	0x92be7f59, 0x791797da, 0x3af45f5f, 0xfe78722a, 0xf7b329db, 0xc3efec3e,
-	0xd81d9c9e, 0xfbbe955f, 0x67c23670, 0xbbe742ad, 0x79f898a6, 0x5e712cdc,
-	0xc9a8426f, 0x3399e78d, 0x667df873, 0xf7a47e23, 0xfdf91c62, 0xe0a677b5,
-	0xffd93439, 0xe7474508, 0xee7b1947, 0xc12c7f83, 0x3722e6f8, 0xd8bf6fde,
-	0xba2fee24, 0x002c1acb, 0x91baf239, 0x186547df, 0x66e744d2, 0xe4f592fa,
-	0xb3d34cd7, 0x727748a9, 0xadbcf2de, 0x01f78f7c, 0x7cb15e60, 0xafa5a53f,
-	0x7bfa0d78, 0x75c83d04, 0x2beca94f, 0xe185b26e, 0xa33cf32f, 0xf82553e1,
-	0x1b43ee43, 0xd05b5ef0, 0xbccde7bf, 0x6daf7d1c, 0x5874feff, 0xf6363dff,
-	0x837eb8c8, 0x1e3493c5, 0x6bdc51f9, 0x278717fb, 0xa477df89, 0xbcf6a7bd,
-	0xbf97b7c8, 0xdeef1253, 0x51ccff9b, 0x827b97be, 0xcb85e5e2, 0x7078ffbc,
-	0x99564869, 0x739d357a, 0xdeae5ef7, 0x8fadff2b, 0x28bedfb9, 0xd3dff7be,
-	0xbcec6af9, 0xceb15ec5, 0x88617e70, 0xe7f729ce, 0x7e54be2d, 0x1a477bd9,
-	0x08d23ef0, 0xf6bcc838, 0xb48fbc06, 0xd0bf4638, 0xe576cb9f, 0xc4aa877b,
-	0x8f301abc, 0x3df23530, 0x38f0b7a7, 0x302f2269, 0xfb7c8894, 0x9d3d2ecb,
-	0x11e5ffe3, 0x31dd8cdd, 0xcb9b9de6, 0xa9ca32e1, 0x0e8d1f12, 0xe3b5fbf2,
-	0x79e793d5, 0xe8d8b9e4, 0x845675f9, 0x63f9c56e, 0xf1ac729e, 0x3f7cb91c,
-	0x99dde72b, 0xf0d1f1c2, 0x9bdf899a, 0xf27cf2aa, 0x4ad094ce, 0x168713e2,
-	0x1e04c3cf, 0xe50faf3b, 0x99b2b9d1, 0x8f10efdc, 0xfaa7261e, 0xc8be51ca,
-	0xd4caee7b, 0xc111c526, 0x87a2578f, 0x1af5dc30, 0xbb840ebc, 0x7ecbbe91,
-	0x7c151f4f, 0xdc363ccb, 0xfa112dcf, 0x5a9ec96e, 0x7ee587b2, 0x3d4ef4e9,
-	0x669c6fe5, 0xba72ae3c, 0xd0fda14d, 0xeb631f52, 0x7cad2e40, 0xaa3378a2,
-	0xb09925ae, 0x1efe1496, 0xe9661f7f, 0xbaf8a8c6, 0xbd495fd8, 0xbe5fc72a,
-	0xd7176b4d, 0x467f6db0, 0x51f4e9fb, 0xb0563f2e, 0x2b3fd226, 0x57f6d01f,
-	0xa7d667b3, 0xbce8cf38, 0x8fc21180, 0xec572d37, 0x1958ca57, 0x4f358fea,
-	0x9fc46e7c, 0x17c78960, 0x434ffbf8, 0x7ddff187, 0x8efe27c2, 0xc96f3e08,
-	0x1720fcf5, 0xf2ef3efd, 0xf5ceaef9, 0x7f45c9cd, 0x7e7cbbc9, 0x702eea17,
-	0x8d2bb33d, 0xfd8b5bf4, 0xfaff922e, 0xdffe5cc1, 0x0035f78b, 0x71264c9c,
-	0x49aeba6f, 0x4df6489f, 0x43ece880, 0x7e731de7, 0x26776540, 0xd3da43f2,
-	0xbf6067d3, 0x1eada7ce, 0x72d6df5c, 0x2ffa214f, 0xf3f356b6, 0x8f1366a1,
-	0x397e07df, 0x538600f1, 0xaf6c7686, 0xa39d1740, 0xfd107f7b, 0x3fbaad42,
-	0x98bcc61f, 0x5f3cc9d6, 0xda175d32, 0x3c62283f, 0x899035a7, 0x68e77df1,
-	0x9a4e6f7e, 0xcb90bcbe, 0x36276e7f, 0xe85c5c08, 0x627f202a, 0x17fa41af,
-	0x2e742c3b, 0x2eff8eab, 0xf1c628c6, 0x70eaf32f, 0xf176910e, 0xf9a666d9,
-	0x1d51869d, 0x4890d04a, 0x3c50a8f7, 0x30436ea8, 0x67d416fd, 0x4f14a94f,
-	0x7b4bf393, 0xe302ab3d, 0xdd8f5266, 0xbfb838a2, 0x0bfdd84d, 0x71e3fc98,
-	0x9e82f9b7, 0xff7b0816, 0xf7872b16, 0xc3cee652, 0x2ccd0b76, 0x76ac0751,
-	0x2947654b, 0x90d6b3ad, 0x8c85768c, 0x47b7c51f, 0x1ac9fb62, 0xe7e7617e,
-	0xe1be959e, 0xf419c9d8, 0x3f865d41, 0x693c85db, 0xffcfce18, 0x83cca1b1,
-	0xd786caf1, 0x30efd046, 0x3c781299, 0x1996e41c, 0x843a11ef, 0xbdd61efa,
-	0xc88b15ea, 0x73880a5b, 0xd8defccd, 0x453939c6, 0x78f11e74, 0x71ffdd1f,
-	0x23ca10de, 0x847906fe, 0x92bea637, 0xe01fbbfb, 0xd90debbd, 0xf941d760,
-	0x789fee74, 0x25684879, 0x92991bde, 0x47978977, 0x72c13e85, 0x6cc25e4e,
-	0x5685172a, 0x3e3ca1ea, 0x7197932f, 0x36040a03, 0x6cf06f35, 0xc92dda3f,
-	0x87702ec2, 0xc377bce8, 0x917423cb, 0x1e7758fe, 0x84676797, 0x3e4cf93f,
-	0xc20e6dbb, 0xfaec647b, 0xded27969, 0xc9f5a36e, 0x2cf6caf5, 0xffbb7633,
-	0x957e7210, 0xc53da738, 0x3c2d5aca, 0x044fe7fe, 0x1eec1c3c, 0x7fcbf141,
-	0xfde14dcd, 0x4f74423b, 0xfa27ec8f, 0xb8e41c77, 0x7bfe15ab, 0xf2a3e759,
-	0xcb977ebc, 0xb38c2be5, 0xea19c691, 0xe79be7e1, 0xfe2214e4, 0xc0aa6f00,
-	0xc9f7ca9b, 0xd07e7ced, 0x13fefe2f, 0xf46287e8, 0x0afc1ffb, 0xe787e7ea,
-	0x27274d1d, 0x5aab38c5, 0x2fb6dc78, 0x69e880b9, 0xf7dc558a, 0xc75da252,
-	0x9f6e3cf8, 0xc592f3ba, 0xaf091d79, 0x69c6850c, 0x09cc7011, 0xf6339f0d,
-	0xaffbaf9b, 0x8eeb4bff, 0xef0797c0, 0xc5d8396d, 0x9f1e37ef, 0xf485f1c7,
-	0xe076429c, 0x677f4d76, 0x9fb547d6, 0xae5f28c0, 0xda80a521, 0x6fee2bdf,
-	0x61d9f795, 0xdc71fcbb, 0x57bb45be, 0xfcc1a7de, 0x1c645993, 0x8cdeffb2,
-	0x70bf710e, 0x286f3aff, 0x8874eb11, 0xef223a75, 0xcfe7ec33, 0x73797d63,
-	0xb8e903ed, 0xfdfdfe1f, 0xfd12298d, 0x563cf869, 0xf1d7c87f, 0x1e5572f0,
-	0x1bdf2797, 0xa33ce45e, 0xe70fd9e0, 0x7849f9a8, 0xbb537f22, 0x94ba5a31,
-	0xf411ccf3, 0xf3bf8039, 0xe278e5bf, 0xbbfad97e, 0x7338be79, 0xbebae969,
-	0xf9875f33, 0x07ddb209, 0x34a0c078, 0x21bc27ec, 0x7327ec4f, 0xbc9c4e58,
-	0x339e6f47, 0xde917fa6, 0x7b27ef47, 0xd9efe593, 0xbd1afd69, 0x397bfe4e,
-	0x7efc73fe, 0xfca36b83, 0x7a8f183c, 0x176e16ce, 0xf2da2fd6, 0x037e0263,
-	0x797d54fd, 0x5312bf38, 0x3bf8f3c5, 0x4af3ab5b, 0x7760ab67, 0xdc552494,
-	0xa6e50f99, 0xfc93c6c7, 0xf154192e, 0xf3c83e79, 0xe04d8f35, 0x7c5747df,
-	0x79cb043e, 0x8a797913, 0xf79479e7, 0x9eccb460, 0x2bb6159a, 0xd173ccee,
-	0x1d4afab8, 0x42676bdd, 0x63d60623, 0xf944dd7a, 0xf1ae1280, 0x5d26259e,
-	0xbff3ac53, 0x03d3f4f7, 0xc04cbf8f, 0x1fd0ba7f, 0x2105fc28, 0xe82fe355,
-	0xcfe7e44d, 0x92fd5f7b, 0x9bdcd7ce, 0x079f5be7, 0x67ad1bed, 0xf287cd6f,
-	0x1407eb06, 0x603c53ef, 0xc61fa087, 0x608b60e5, 0xadd9cabe, 0xd89fb45e,
-	0x2559b76a, 0x18ff0ab8, 0xf007a9de, 0xa7b5e57b, 0x0f883c7e, 0x4c79c5e3,
-	0xf1a07214, 0x15fdbfb5, 0x678dc4e3, 0x1b346e6c, 0x7c3f7627, 0x135fda27,
-	0x1bfedfbb, 0x3cfcc3d7, 0x44f79c90, 0xfbc27ff4, 0x9a265d09, 0xabeec4ff,
-	0x6bfd6056, 0x402eebdf, 0x44eeb93a, 0x42c505b0, 0x3effabef, 0x880e7348,
-	0x7cd97a7d, 0x39f1b8d1, 0x013f8f09, 0x1e0893a0, 0xf8f0e73f, 0xced9f28a,
-	0x0e6e8f3b, 0x7b549391, 0x78ec0ade, 0x605f3b8a, 0x7b8c6e09, 0xd1fd73c8,
-	0xd5e3d57e, 0x7f783eb0, 0x20cc1f5d, 0x729e9ec2, 0x24820cd1, 0xc9672e5c,
-	0x39a5729a, 0xcabf534b, 0x3ef9af91, 0xcd2af33d, 0x42ae99f7, 0xc8d6794d,
-	0x37fa9a89, 0xe535cbba, 0x6a6613d9, 0xaa7b57ea, 0x60c2e535, 0xf17ea687,
-	0xf7ed2e91, 0x788f4c63, 0x7eee3a28, 0x27a59f03, 0x2d9ee43d, 0x06f4d53b,
-	0x85fe273e, 0xafda2383, 0x8ec5cd7c, 0xf4bdf037, 0x9f9f472b, 0x9be67e92,
-	0x3180b6f5, 0x53393fb6, 0x83df082d, 0xf3f1d7a0, 0xfb25ef53, 0x937880fe,
-	0xa0a6a7e7, 0x5090195f, 0x9fb9db75, 0x5c32efe2, 0x6efdc458, 0x943111c7,
-	0x7f276e4f, 0xd34371e5, 0x79e47fb3, 0xf728b903, 0xaf9bebae, 0x8b94f759,
-	0xcbbacd3e, 0x3c28aad9, 0x5729a1dd, 0xd4d6ee39, 0x5eb99e9f, 0x6ba67df3,
-	0xb69e144b, 0xba37ca6b, 0x53c28e1f, 0x9e9e147b, 0xf4977cd2, 0x5ffc2ddd,
-	0x0adfa1af, 0x3d42939e, 0xc9878895, 0x1f08faa7, 0x2ada7a13, 0x1cd74f11,
-	0x957c20ef, 0x2895bd04, 0x348ecb2e, 0x20cf81bd, 0xddb0cbec, 0x7a4ce681,
-	0x91766c1e, 0xf370ebff, 0x691e7a48, 0xfffbd376, 0xcf409e68, 0xe87b355f,
-	0x33cd9ff9, 0xecd3d9e8, 0x734767a5, 0xae7fd507, 0xcffb8bb9, 0xddeffb52,
-	0xc1bf45c8, 0x01a85d79, 0xc18ec623, 0x9e9e495b, 0xc79d084f, 0xeb7f06f2,
-	0x3420a9ec, 0x901d67f0, 0x9e207f2f, 0xfb4f2e45, 0x1e0e7860, 0x19fdf8cc,
-	0x43a37f22, 0x3b4429e7, 0x0fe3f47c, 0x32e6a7de, 0x37bd69b6, 0x183a7f13,
-	0x132866cb, 0x90f7e9b2, 0x93cfbc1e, 0xa8b3d8c3, 0xf7bee84a, 0xb9636707,
-	0xe79efc57, 0x241fc7e0, 0xc75bfc3b, 0xe2033dd9, 0xc707a3ec, 0x7b3fb388,
-	0x7f4765ca, 0x46afd1cf, 0x471e11d8, 0xc3cbdf85, 0x3bf80d0a, 0xa16ae51c,
-	0xf1ecf501, 0x5421e738, 0xe0c97953, 0x7bb75c52, 0x5f91e51e, 0xe1dfa06f,
-	0xfdf0a39b, 0xec97acaf, 0xf7a0fae2, 0xa7ed1346, 0x2b3ce98e, 0x957a3f90,
-	0xce10c7be, 0x14fe3d37, 0x7b5ea9e9, 0xafc21e5f, 0xbcbdf1fa, 0x4c7becec,
-	0x0d944771, 0x8f953e1c, 0x6fdb393f, 0x33e15efb, 0x0d11d71b, 0x1d83b99f,
-	0xf4115f7c, 0x201da2e4, 0x3daac7cb, 0x2c5714f5, 0x75c30cf7, 0x389af51c,
-	0x81ed7aff, 0xf237e461, 0xf08bce94, 0x360cf4ff, 0xa2e7fad0, 0xe83f44de,
-	0xd6207d42, 0x1f9e15ef, 0xa23dedcc, 0x2e67dc13, 0xe0bed2b0, 0xa3df8e98,
-	0xeedf5d10, 0xcfa3fbe2, 0x9c87dce2, 0xdc57be28, 0x0becff54, 0x5aef5fd0,
-	0xebdd750b, 0x58f6411d, 0x1740136f, 0x54f7ba68, 0xddfe39d3, 0xa12016e4,
-	0xf82def38, 0x6cfef82f, 0xfc5f9df7, 0xb07fea06, 0x1d26ead6, 0xf04518e2,
-	0x2f2a285b, 0xfd93354e, 0x6e4e78b4, 0x5bc5ea05, 0x56f0bc44, 0x614e9abb,
-	0xe8d93543, 0xdb967e80, 0x0403370a, 0x6ab4cad9, 0x5364fe23, 0x9b1dce4d,
-	0xe87ab9f1, 0x58f22376, 0x9b7d98dd, 0x07ad8cd1, 0xf9252e16, 0x19a77a17,
-	0x3adb75e6, 0xe7ef8bbd, 0xdadaf9e4, 0x22f7946f, 0xc898f7e9, 0xd020024f,
-	0xa5c9357e, 0x4949f668, 0x181f4e82, 0x6331e22c, 0xda4bd8d9, 0xe44ed778,
-	0xdf8bb3a3, 0x1e271e19, 0xec2efda1, 0x7b8adfc7, 0x4fefa39e, 0x5c3ae391,
-	0xcc75ff7c, 0xf6899408, 0x07ae42e4, 0x7cffcdc6, 0x7fac2943, 0x4743b75c,
-	0xd5b70d79, 0xb87880bf, 0x68f025d0, 0x4fc85d60, 0x7c97f937, 0x4c421bf0,
-	0xf0dce69a, 0xbba5f495, 0xa91951c7, 0xde424b2f, 0x397d48ca, 0x12adafa1,
-	0x8fd4a2f5, 0x211ae6c1, 0x8e489b8f, 0x475e6c1e, 0x7ecdc3e5, 0x6e691e7a,
-	0x8db8f215, 0x79aaffbe, 0x01c790a7, 0xd2f78f21, 0xf9e6eefb, 0xd9ad7cf4,
-	0xa985cf47, 0x6e11d7be, 0xd73b8e32, 0xdcbca3ec, 0x189b0f43, 0x742ef1c6,
-	0x038f289b, 0x47b1e238, 0xc94f30d2, 0xa344e744, 0xe5a295f3, 0x743d3f7c,
-	0xe5b7b80e, 0xfef7e46d, 0x17b4233c, 0xa7a7c707, 0x4765cca3, 0xe0f1f4b9,
-	0x8e8724f3, 0xb4765cba, 0x2e3e4fa7, 0xdd971eca, 0x0d3fe500, 0x71fd25ee,
-	0x9bb2e7d4, 0xe3c9fca0, 0xdfbbfcbd, 0xf940b765, 0xfc7dc1d3, 0xd051807b,
-	0x2fe0ecff, 0x33958e48, 0x47f220e5, 0x2a7f39a5, 0xd7d00ba8, 0x2f9107e5,
-	0x992e67a6, 0x60b17c8a, 0x72e88bb0, 0x41fd6ba6, 0xd91acf2c, 0x1515e2ae,
-	0x46e15b1e, 0x5691576c, 0xa9bb62ad, 0xc46c7739, 0x6e86d376, 0xcddb2357,
-	0x236fb318, 0xb7706f96, 0x2e9f68ab, 0x1a563940, 0xe59647ee, 0x65a72977,
-	0xddd5dd3e, 0xe307d25e, 0x0fa4bcba, 0xe62a5c24, 0xff426f56, 0xe2976367,
-	0xa9a5dfc0, 0x27f4ab98, 0x62ee6033, 0x0a93de03, 0x3dfffaf2, 0x87ac77ae,
-	0xf9623675, 0xadb72a1a, 0xedfa06ff, 0xe2f6007f, 0x8000e831, 0x00008000,
-	0x00088b1f, 0x00000000, 0x3cd5ff00, 0xe5547809, 0x9dcee7b5, 0x4c92642d,
-	0xe2420836, 0x96249964, 0x26b6432c, 0x0c486410, 0xf90130ee, 0x10196544,
-	0x044816c2, 0x7eab17eb, 0xe0171a19, 0xd16b8d69, 0xb5c46faa, 0x61e4b6af,
-	0x1d0958d4, 0x87d252aa, 0xb410553a, 0x88a47479, 0x119099f0, 0xc7d278dc,
-	0xf7fce73b, 0x24cee666, 0xbefd1480, 0xff938607, 0xcfd9fbfe, 0x005ffff9,
-	0xb3f85380, 0x34607f02, 0x3d2538fe, 0x0468048c, 0xd1bf67f1, 0x0395b26d,
-	0x8c0734ac, 0x412fa3a0, 0x6010aba3, 0x76960eaf, 0x24a40014, 0x0b7afcc3,
-	0x74b08d96, 0x5de7960b, 0x05480368, 0x20bada68, 0xda85816e, 0x6066e3bb,
-	0xe21745fb, 0x52ce38af, 0xe0546e05, 0x9bd40a93, 0x4f34899c, 0x1fd24d9a,
-	0x856fc7ca, 0x064a7850, 0x3d9ab7e8, 0x448004ba, 0x0dac7b93, 0xfb9bedc7,
-	0x8758834e, 0x31d688af, 0xeb1ebd6c, 0x6c3200e3, 0xca1f1e56, 0x5e541982,
-	0xc846ed09, 0xcff5b846, 0xda22a4fb, 0x2327c597, 0x5f434e84, 0xf9ec5f20,
-	0x63fe1654, 0xe0543d06, 0x6e03e97a, 0x70d79969, 0xea566020, 0x743967f1,
-	0x226670ec, 0x7ed45ede, 0x18bf046f, 0x7dfb43bf, 0xbe8de215, 0xbf697537,
-	0x0f5b5403, 0x0230438d, 0xd9dfb8cb, 0x855efe12, 0x878f0dff, 0xc3c06749,
-	0x10f0a1a4, 0x1af01fb5, 0xd7de8e41, 0xa66ecb0a, 0xc0bee473, 0xd1fcca9d,
-	0xf7218108, 0xf445f2a7, 0xfe05dafe, 0x25ff02f5, 0x5a74e736, 0x38fcdd5f,
-	0x8e005390, 0x4d79356d, 0xa9ffdc99, 0x1744293d, 0x2d837593, 0x5b5b3e9a,
-	0x00de8367, 0xcdd5adb0, 0x14bad7d0, 0x3f8076f4, 0xf97336b5, 0x2e16d6ad,
-	0x30f568ef, 0x8ebad9dc, 0xdb5a5fe1, 0xeb577eb9, 0xdbbf2e46, 0x6fe865ea,
-	0x5fbf917d, 0x86657f3b, 0xff4d12db, 0x45cec9d5, 0x7b9e8fc4, 0x3e9913aa,
-	0xc853f7b8, 0xc81a9eab, 0xc344b66f, 0x9d658301, 0x8f65c094, 0xd9e1f711,
-	0xc36de316, 0x8c73fd7d, 0x19c689bb, 0xad7e09a8, 0x4a437c43, 0x30d0f180,
-	0xbe9abdd2, 0x3a1c464b, 0xe4f56689, 0xeb0efe12, 0x6407bf3c, 0xd39b56d9,
-	0x383e47a5, 0x17558f1a, 0x6582dc00, 0x78f3ce0f, 0xfa85abaa, 0x48c07e41,
-	0x3fa29ce3, 0x097c7193, 0x3af07766, 0x0e1ca210, 0xb1e808c4, 0xd18f2c49,
-	0x40ddc850, 0x60f99fba, 0x1913e9e0, 0xcb3382b6, 0xa8f870c5, 0x9e03ab93,
-	0x6567a432, 0xd584c3ac, 0xa4f8127d, 0x46538412, 0xd38e00d6, 0x13d46e97,
-	0x5644149c, 0x9fc3c750, 0x6322dfc9, 0x14cbf186, 0x6b94d448, 0xed35a3cd,
-	0x9a99aceb, 0x5cf4befa, 0xb4d2ff1e, 0xfaed348b, 0xc59a5746, 0x232f53bc,
-	0x6f7465d8, 0x0974805c, 0x9b1c9956, 0x98bdfeb0, 0x062822f8, 0xbf1b1698,
-	0x317be089, 0x376a5e19, 0x14c9c0ed, 0x934e7dc0, 0x108b237d, 0xc6db9755,
-	0x99edc76b, 0x76c36353, 0x6957e657, 0x25c121d7, 0x1dabdfb4, 0xa7df3453,
-	0xe9ae5e57, 0x93fb32ef, 0xcef5ad08, 0xc6f7cd7a, 0x9f41af96, 0xe5b1300c,
-	0x014be824, 0x343afbc6, 0xecee94e3, 0xbf1fb4d2, 0xeb12641b, 0x378e7d92,
-	0x741f9609, 0x152ac4ca, 0x24df9b87, 0x3fa5f558, 0x4e01f683, 0x9f5159b0,
-	0x83dc8a4b, 0x963d0247, 0xcae52927, 0x812db7a0, 0xf21270e8, 0x89bf48f5,
-	0x6321c230, 0xbff2a963, 0x4c1f104e, 0x32002052, 0x16abf607, 0x3a79804b,
-	0x4598d78b, 0x1be5056a, 0xc906c1f5, 0x3847a691, 0x50540e47, 0x8a0428f9,
-	0x973aca08, 0x2a6bf89e, 0xb2a58f34, 0x0469dc09, 0xbf74483f, 0x2fdc7c4f,
-	0xe2c4da05, 0xcfc4c982, 0x68ff3f75, 0x17ac6dde, 0x5c261c62, 0xfebaefdf,
-	0xfd6b4a91, 0x91f53fbb, 0x7e216c37, 0xcd7eb26f, 0x8dcb5278, 0x7f19c72d,
-	0x2d6fb96a, 0x92e177cc, 0x9f680ddb, 0xaffe3610, 0xed0a76cc, 0x53a23ada,
-	0xb8c9fc23, 0x1ed420ba, 0xc418be3a, 0xbfea3177, 0x04d35a7a, 0x5ddfd7c2,
-	0x6f576c4e, 0x9e087210, 0x1c4ef545, 0x29463ea7, 0xa7d44f83, 0xb2a1ed2a,
-	0x6ae9cb9e, 0x6f68957d, 0x587bc757, 0x96ad1fb4, 0x522ef195, 0x9ca2cdcb,
-	0xa0f7cea9, 0xe5aa1728, 0x397170ff, 0x613fb44e, 0x29ef559b, 0x53ffe908,
-	0x0f18ddaa, 0xa06ec9e3, 0xc933903d, 0x1abb481e, 0xeda21f98, 0xb15eb685,
-	0x237ff317, 0x44c58c7b, 0xdf63cb8f, 0x90eeb921, 0xf1bae480, 0x8bd38376,
-	0xd49e7ff3, 0x12c6b451, 0xb7e7dfc2, 0x6abb7c08, 0xb6329ce3, 0xde6af95f,
-	0x3923e226, 0x85c8f76e, 0x563addf8, 0x4ea77ac7, 0xe88138b6, 0xfbd0af7b,
-	0xd848ff6a, 0x8686f2d0, 0xb2f5519e, 0x6cc1f3c4, 0xfaf9c1fc, 0xf4f51bef,
-	0x8e59c206, 0x9370973f, 0xdcf42999, 0x95add448, 0xea36f3f8, 0x3dd23359,
-	0x3a9c1b25, 0x1af29f6c, 0xf1a267ea, 0xc7d0bf41, 0x24f8c5af, 0x8f959c14,
-	0x6ff6c9bd, 0x8e528ca1, 0xcf2d7bf8, 0x7c89979d, 0x9fce347a, 0xd0db7c4b,
-	0x75d78db2, 0xe3cadd8d, 0x10583583, 0xcce2cf8e, 0x9e97fc28, 0x3fa5ff01,
-	0x8271fe26, 0x75cfa403, 0xbeb47428, 0x78b796e5, 0xef95cbbf, 0x43325fac,
-	0x472cb8ed, 0x39c68f97, 0x0e1f0832, 0x74074e85, 0x5f050ab6, 0xfabe1357,
-	0x1373fb17, 0xf9f0ecb1, 0x3ed9ba47, 0x88972aec, 0x4071cdee, 0xf92a3f74,
-	0x410ef68b, 0x0ed68eff, 0x5a5bcbb6, 0x84be18bb, 0x55bad073, 0x8d10dd7c,
-	0xc067f9df, 0x131ffcef, 0x01f4a3bf, 0xadfb03a3, 0x4e3c07da, 0x1180ff85,
-	0x2b4cf4c2, 0x27e225f1, 0xfae24ba1, 0x2120b93a, 0x138fa9a0, 0x738e52fe,
-	0xcae9f13c, 0x37aabb19, 0x98792148, 0x311d0b1c, 0x0ed7cc49, 0xc41daf85,
-	0x22ff2ad7, 0x11ea963f, 0xc49d6fcf, 0x37e0437e, 0xf3c0bfc4, 0x3bba78a8,
-	0x881baf1a, 0xabc1a78e, 0xc607feb6, 0xc7fa276b, 0xaf8237a4, 0x653778c4,
-	0x77f9e346, 0x7c555e0a, 0x7fe4536f, 0x236f3c38, 0x7f9ea73c, 0xb4cb6f3c,
-	0xf891b8f1, 0x453ece1e, 0xf75d47d2, 0x7e5a7210, 0x2d3a722e, 0xdff8aadb,
-	0x461677e8, 0xa26dfdd3, 0xf74359bb, 0x53c8339e, 0x4f298fcf, 0x848b7891,
-	0x3ab8128d, 0x3fdfd12c, 0xdf561ccb, 0x4e3c179d, 0xf8d6ce0a, 0x75bf9367,
-	0x29b3fc6b, 0xfd696118, 0xe5349bd8, 0x9aadeb3a, 0xada697f6, 0x6e5fd4d5,
-	0xbfa9af5b, 0x4d01ff32, 0x63c76af9, 0xd3e67e11, 0xe77afa9a, 0x73f5346f,
-	0xea6bb79b, 0x68f4b7e7, 0xfe7817ea, 0x78ab29aa, 0x1c0adadc, 0x356b6d2f,
-	0x65d3f12b, 0xfe03ab0c, 0x8b83125a, 0xdfd9070f, 0xd7b7f4ac, 0xafb24bb2,
-	0x32d1fd83, 0xc296ab9f, 0xcd9d8aaa, 0xb5f4126f, 0x2d78955a, 0xad5be18d,
-	0x3befd636, 0xee19f35a, 0xf128756c, 0x5dc3255a, 0x4e254ead, 0xb48c3173,
-	0xbb66af0b, 0x3d2164a7, 0x44bcbda6, 0xe980b807, 0xc167f87f, 0x77bc5a5e,
-	0xdce28ebc, 0x8e5eca35, 0xffb37f57, 0xe3afe436, 0x950726cd, 0x311fb77b,
-	0xf9a30ad8, 0x32b7ee65, 0x6cf8c338, 0x0d5fcb6e, 0x45cd67e4, 0x0863ba0f,
-	0xa59a9d39, 0xf7207e63, 0xcc2f5003, 0x05218336, 0xd9ecc1f5, 0xf80da392,
-	0x189207bb, 0x3f58dcfa, 0x133e0f4d, 0x7a2deb96, 0x979e299f, 0x3fa332e6,
-	0x132c4b3d, 0x50f07a4c, 0x7324a43d, 0x7d0d7e9c, 0x383ca1b4, 0xbf18b865,
-	0x1c3f22cf, 0xe96f5dfb, 0xbddd9030, 0xfa2fe76e, 0xb87ac36f, 0xf1ce53d3,
-	0x25625c3d, 0x3e792dfd, 0x371a9dd6, 0x3520bcbc, 0x5f1850e1, 0x4e19254f,
-	0xe1d1f8a5, 0x7adc5277, 0x9cf1c193, 0x05dfba2d, 0xc9a77eca, 0xc16ffb12,
-	0x4dde4dd7, 0x713e4852, 0xb84d3b7f, 0x01e226cf, 0xc1b367da, 0x7e445797,
-	0xb3f676f6, 0x16d72a9b, 0x2e9a9d11, 0x15313e91, 0xa69de285, 0x8fd92f96,
-	0x91cfd48f, 0x90f14cf0, 0xfe656fc3, 0x93badfdb, 0x8b8d45f9, 0x5c7d5b7a,
-	0x6ab80b2e, 0x39a3e3c3, 0xa64dff93, 0x4beaa7b8, 0x3c4cff11, 0x53fbdce9,
-	0xd5a077dc, 0x17e52fff, 0x9a82bcd4, 0x5bcc8867, 0xde647aa8, 0x6e0975ad,
-	0x2c9aefdc, 0x94f30651, 0x5ea3a674, 0xdedf5540, 0x9765159a, 0xbd3ac8ef,
-	0xffd6d67e, 0x6cf9fac0, 0x4d31bff9, 0xbe48d5d8, 0x05e337df, 0xe553ad03,
-	0x9ffe48ef, 0xfe707d43, 0xd7924d39, 0xf67a7a83, 0x44c37692, 0x7df9dce9,
-	0x88a0e5b9, 0xc2ed238b, 0x3607b6f7, 0x2b5c9ba6, 0x92617c73, 0x1e50726f,
-	0x4743a544, 0xcf3add34, 0x1fceb740, 0x76d16e93, 0x73bce0f1, 0xf1a08bb3,
-	0x8acbdfcf, 0xc83e27f2, 0xa91fbd3a, 0xf781ffad, 0x636b1d6d, 0xef4472b8,
-	0xea27593c, 0x01627c45, 0x80eff21d, 0x74b8e657, 0x3c7b6669, 0x195033c5,
-	0xb77d278c, 0xf2065bac, 0xd4ef410f, 0x5cfe468f, 0x1f67f0a2, 0x7e243ef8,
-	0x7ef7055c, 0x25980941, 0x22ae4bd5, 0x09f4b73d, 0xfc4f0843, 0x27f393af,
-	0xcb7e94ab, 0xda469d2d, 0xb567f2ef, 0x1a71d4ed, 0x1fc88a5f, 0x19fa5f57,
-	0x73f0ddb0, 0xa7556fde, 0x5977dfb6, 0x62872971, 0x084b1659, 0xa7d267ef,
-	0x1baec947, 0x5b27cac2, 0x3f20bf39, 0x9e03e0f3, 0xc4fa21b1, 0x71f14764,
-	0xf9e9f65c, 0x23ff5b58, 0xf71cb1f3, 0xf9e891ac, 0xbf78f97d, 0xeb4599dd,
-	0xa0f3f556, 0xc4c379de, 0xdca0677a, 0x37a4f226, 0x9e2daefd, 0x3804e4f8,
-	0x2a161d88, 0x6a85d2f9, 0x369d74be, 0xcfb93a5f, 0x49b979c7, 0x716dbd07,
-	0xbd89f748, 0x55dbce1e, 0x59b776ed, 0x5dd3fcb0, 0xa3fc994e, 0x64b96ff1,
-	0xdfeab75a, 0x484efea8, 0xbeb0e58f, 0xf66bbce3, 0xd53bebd9, 0x30f6aa2e,
-	0x06560ed2, 0xfec96bdb, 0xe3b6f84d, 0x2be7824d, 0xf7691eaf, 0x7a138bde,
-	0x57c1a8e2, 0x8cfc97be, 0xcf1c63d7, 0xaffaf441, 0xc67e16cb, 0x0302cf4c,
-	0x1f091fcb, 0x450cdbca, 0x764fae6e, 0xf54d975f, 0x99d0bd8a, 0xa3b2069d,
-	0x23df7275, 0xf95f12d7, 0xde1bce65, 0xbf07c77c, 0xccedb5ff, 0xeb2685f9,
-	0x863ff671, 0x749a338b, 0xa2f8a6e0, 0x4a56d6a4, 0x6dc50c7e, 0xf3544794,
-	0x9fed918a, 0xc8acd7b0, 0xb5573ce6, 0xd9eb49df, 0x1c33d628, 0xbe5a9abd,
-	0x8731e4d0, 0xbba9bf9b, 0x4c30badc, 0x16ca5e3e, 0xdbd22ef1, 0xa21cc87a,
-	0xc5f2d9f7, 0x65f8b7ff, 0x091e0c9a, 0xe4a16ced, 0x082ffe15, 0xf80e783f,
-	0x2083ce19, 0xf9583743, 0x38216a7c, 0x17022e18, 0xdbbb7cc3, 0x60337c4b,
-	0xbe248e08, 0xbbf57fea, 0xfe9be202, 0x57b6278b, 0x5f3bf9c1, 0x06fff48a,
-	0xfe78dbc6, 0xdbbe5781, 0x7039fc43, 0xf4ace187, 0x6764eac6, 0xe451f127,
-	0x53bbcb79, 0x01d73e64, 0x8b967afd, 0x03e8ab7a, 0x1b72a497, 0xe64cd8eb,
-	0x1cde908b, 0x37aab4f5, 0xc2bf6017, 0xd7ac744f, 0xb5e49960, 0x80aed363,
-	0x70ac458e, 0xa657a671, 0x2fa8a772, 0x95e8995c, 0x15585cb0, 0x4a6fea23,
-	0xc52642f4, 0xcb960143, 0x0fac00f9, 0x8bd08017, 0xf7938237, 0x96419189,
-	0x6f17fd84, 0x3e709735, 0xa4390216, 0x8e288bff, 0xb74e221a, 0x2f7908e6,
-	0xbefa12ce, 0x179b46b8, 0xc95b30f9, 0x4a6bdb1b, 0xe7561072, 0x1d12f738,
-	0x1bfc938b, 0x7ca32a1e, 0xa1360e90, 0x75567d7c, 0xaa779f2b, 0x35ed1afd,
-	0xcdbf84bd, 0xe2bc7012, 0x9f7936e9, 0x238ce713, 0xf2cdcfc3, 0xa807b5ed,
-	0x7b5a11dd, 0xc578f0f9, 0x47f71c7e, 0xd78795cb, 0x1bb14c57, 0x43f1fbe7,
-	0xe5cbcf25, 0xebe679ff, 0xf80b3bfa, 0x7e43c14c, 0x7ddda372, 0x046fd79c,
-	0x9ffad0b0, 0x40147114, 0x47e50673, 0xd2653c97, 0x11f19f91, 0x03c8639a,
-	0xddc61bf8, 0xe31bff04, 0xc77f8267, 0x27e099f8, 0xfc133f18, 0x04cfc607,
-	0x1e3b7f17, 0x8d802283, 0x4e4b4e39, 0x301ce879, 0x1c86bd72, 0xf9c1cf81,
-	0x7f3c8dbb, 0xf8cddd9d, 0xebf7a41d, 0x9973a5e0, 0x0bc189cd, 0x6fc34e92,
-	0xf0dfdd03, 0x7870e9f9, 0x2325cf51, 0xe853bfeb, 0x67a9d45a, 0x15d45ffb,
-	0x6b086f88, 0x918e4177, 0x395f0beb, 0x1fe34f18, 0xd7e20eb5, 0xa796e129,
-	0x82f944e9, 0x08332d67, 0x677675bf, 0xe51bed09, 0x51f6833c, 0x83c1f5d4,
-	0x7c78cb13, 0x75a364ab, 0xb8e51f04, 0x911f6221, 0xb5f75078, 0x81bfd139,
-	0x257e6ffa, 0x7a82768b, 0x10dc8407, 0xed43491f, 0xcff32d77, 0xccb05374,
-	0x7e9deb8a, 0x0a1e6e4a, 0x29f675ff, 0x5477e78c, 0xc7cf537e, 0xe952fe15,
-	0x1df2ae76, 0x6b901e39, 0x6ae77e84, 0xb236a5d2, 0xc9e3274b, 0xee57ac2f,
-	0xe6757419, 0xf4fb47bc, 0x6ec194ec, 0xc8d63e63, 0x5f8562df, 0x6dd85854,
-	0x36bd1174, 0x59ca1f77, 0xe4fa6164, 0xb3f6c62c, 0xbc9aec72, 0x89d56167,
-	0xe14a1fc7, 0xea9a56f6, 0xceba783a, 0x60dfe38a, 0x6d36fede, 0x93f5ae69,
-	0xcf2c44ba, 0x1076934f, 0x9ccb605c, 0xe5a3649a, 0x37fd797a, 0x41d94fe6,
-	0xa3957522, 0x29b9fd9e, 0xecc264a4, 0x9639ad43, 0xcb071f0e, 0x4d64d675,
-	0x31b4d2f9, 0xdb97f69a, 0x57f535b2, 0xd4d38fe6, 0xe55ef3ab, 0x2bb4d528,
-	0x51660a4e, 0x60fb875c, 0x64e780b9, 0x7da25daf, 0x1c62beef, 0x3f3da796,
-	0xca6e41cb, 0xda7ea566, 0xd12f5a96, 0x69f10063, 0x70ea8744, 0x1f47fae5,
-	0xe222c1a2, 0x67eec686, 0xe76d3876, 0x130c3710, 0x7100ac2f, 0xdc5c3f8e,
-	0xa02f1910, 0xf4907cfe, 0xd7abf167, 0xdc70db58, 0x2e2755cd, 0xef3ee1b0,
-	0x8238c1cc, 0x47128dec, 0x833fc70c, 0x04d92272, 0xf0c8f4ff, 0x03fc10dc,
-	0x1f850bf0, 0x3ef69c05, 0xdf0533fa, 0x4a7dbf5f, 0x07f38dfa, 0x57efc51e,
-	0xafbe4460, 0x6f78e8d8, 0xdea7e50d, 0xf9ce8191, 0x03ae24e1, 0x77e81beb,
-	0xb0f7c439, 0x46bbe9e8, 0x0f77f0a7, 0x94aba6b9, 0x731fdffc, 0x71aabf14,
-	0xcba35dfb, 0xf370f542, 0x70f69a27, 0xa6b774bb, 0xb6a6677c, 0xbb94ef7c,
-	0xe70ffbc3, 0x5c6c3597, 0x9ca37460, 0x392c3c36, 0x8be843bd, 0x28a4f5c1,
-	0x097ba1fa, 0xdb43dbeb, 0x716d1997, 0xe157edd1, 0x6cb79478, 0xaadec618,
-	0x193aea7a, 0x7faa879a, 0x71cf9d47, 0x08fbe77e, 0xcdf64f71, 0xc3b09af3,
-	0x8db8251f, 0x2fb27ce1, 0xf47b9c47, 0x1dc0f63f, 0xee79d35f, 0xeabe22eb,
-	0xa3f6144f, 0x9d33f3a8, 0x08f1610e, 0xd6455fc1, 0xd2ec8e80, 0x0f58d2c0,
-	0x2d359ca0, 0x8ae8f38b, 0x7e088fc9, 0x5e4f1e68, 0x9a0f2dc7, 0xeb1fce91,
-	0x3cbb1a74, 0x9616c140, 0xd9fd9efb, 0xf7e93b8c, 0xe92f7102, 0x2fb3ed7c,
-	0xad7d8407, 0x1e637a11, 0xb7629ff1, 0xd3565500, 0xc768305d, 0x5e10cf48,
-	0xbf6b9ca8, 0xc987fdf5, 0x7a11efcf, 0x370af283, 0xb4e05fb0, 0x1d0df368,
-	0xbbf8e72c, 0xd73efc2d, 0xb78feb59, 0xf3968dda, 0xd84647a8, 0x218779b5,
-	0x57fbc5f4, 0x5e9b3d22, 0xd05ef997, 0x04f6adb1, 0x911fd308, 0x28da6c78,
-	0xe5ab9cb3, 0xcbe55ba3, 0x830f6cbc, 0xd185f519, 0x83a706f8, 0x55b57fe5,
-	0xd27ab7cc, 0x4ec83337, 0x8bd6eeaf, 0xcdc32f4b, 0x5b064eb3, 0xb79b3cd8,
-	0x5d929699, 0x603fd753, 0xf749f455, 0x0a534957, 0x843b5c04, 0xc0bf457d,
-	0x417e4290, 0xecf1c4bd, 0x3551ee9e, 0x123da784, 0x3c256cf8, 0x5c6635c4,
-	0x1c314cdf, 0x5e50b77d, 0xf9f2d214, 0xd71aa59e, 0xacecf1aa, 0xf27659ee,
-	0x5cec3f63, 0x072907b8, 0xccd9ec93, 0x8782d74f, 0x893deefd, 0x93ca74ae,
-	0x3fee534c, 0xf60c49ec, 0x67bdbf91, 0xf744ac52, 0x3bfc7019, 0x5f757c69,
-	0xf4ae0c7b, 0x9297de66, 0x44fe752f, 0xf67b153e, 0x67aaa271, 0xa7dbe4eb,
-	0xf7e7495c, 0xf14ac073, 0xf85974ec, 0x2147f0d5, 0x6d5eaacf, 0x6c49fc92,
-	0xa633edaa, 0xa34f11db, 0xe4a97e5a, 0xf735db7d, 0xafd6cf00, 0x5fa38c1e,
-	0x567f9894, 0xb1bc4439, 0x47f3faaa, 0x57f9c5ae, 0xfe4fbc61, 0xedaec2dd,
-	0x917f08fb, 0x7c60fdf1, 0x7be62ff5, 0xd733e3a3, 0xcddfda32, 0x73df1c77,
-	0x69c7442d, 0xea817183, 0xcb173e5f, 0x58a8d6e7, 0xfc287c85, 0xee5b647a,
-	0x7f5835de, 0x66062fe4, 0xfd2737d7, 0x58ade8ea, 0x58b9f9be, 0x2491f3c6,
-	0x391d90f0, 0xebcf29b2, 0x744b06c1, 0x6fb25ec1, 0xcf8e25b0, 0x327b3e69,
-	0x512fb7ef, 0x76b7f27e, 0x7e4843f6, 0x7cc2e86c, 0xe88ff746, 0xb9a3cbfb,
-	0xbcc5b81f, 0xca5c8a0d, 0x5fde142f, 0x242ff54d, 0xa5427e73, 0x6327e1df,
-	0x7dac149c, 0x2b22be05, 0x92e7deb2, 0x5bdd10e7, 0x697ba15c, 0xf97c84bf,
-	0x06f708d5, 0xc7f2f7da, 0x89c3f3ff, 0x17da9fb8, 0x1555feae, 0x07d96fae,
-	0x84e340a9, 0xdfb43ae8, 0xb66b6c70, 0x3f057f90, 0xf18c5e2b, 0x27d30c1e,
-	0x35123b2b, 0xd1aea6e5, 0x7a6183de, 0x729ef068, 0x04e7c4a3, 0xed5c8a8d,
-	0xeddbba37, 0xfba5d794, 0x713f4ca9, 0xce84b51f, 0xf7ff08ab, 0x91ff1899,
-	0x5da2f67c, 0xf3566739, 0x4e60c93c, 0x0b75b923, 0x97dc0dfc, 0x31e289b7,
-	0xf1493d9f, 0x33b9823b, 0xb3f9c30a, 0x9c1bd577, 0x7b8931e7, 0x9f43318f,
-	0x13da77eb, 0xf9837db9, 0x699e4d4b, 0x4d09cb55, 0x015567fe, 0xd2501fb0,
-	0x89bd2b66, 0xba1487ce, 0x7aee9fdc, 0xf1def18d, 0x18bbabc0, 0xf2dc4f9f,
-	0xd3bbcd31, 0x5d83f4c2, 0x11163c4a, 0xbf98356f, 0x69efe450, 0xe87e7f8d,
-	0x9445bdb1, 0xcaf438ff, 0xd3ca22b8, 0x87fd942e, 0xf7c99d7e, 0x86dff69c,
-	0xf7cecb70, 0xb91e2f39, 0x0c7ba8de, 0x8d43d092, 0xba648fb4, 0xc77ae3ff,
-	0xf42e72ce, 0x850d81c3, 0x1f353f8c, 0xe864703d, 0xa75d5078, 0x3ebabe3a,
-	0xddb57c75, 0x5f22ecdf, 0x17f46fd0, 0x415ffd91, 0xfb6130e7, 0x17f78fea,
-	0xbbe85a25, 0x4913f855, 0xb7e30e58, 0x2abcf57f, 0xf06a7cf2, 0x47c9565c,
-	0xfdadd3ed, 0xaff91199, 0x8321e3af, 0x7eef5c3b, 0x752a73cf, 0xdafdeabd,
-	0xfd85ab7e, 0x2576939b, 0xe90e9f1f, 0x1deb0ed4, 0xb7bff23e, 0xc7e41c98,
-	0x905c9a27, 0x3469f88b, 0x9afef8fa, 0xe4d12fda, 0x7991efe6, 0x234481f9,
-	0x81e5bdd0, 0xf7fce554, 0x42bd602b, 0x9c16e871, 0xd756acb7, 0xd212c5bc,
-	0x2cfeaa87, 0x0bdf871b, 0x3ea91ee8, 0xdf2027e4, 0xdb6b1594, 0x2da3f687,
-	0xa0ae7bff, 0x6eb25963, 0x24b938c8, 0x1b65c857, 0x9e42c874, 0xa89d1d85,
-	0xbf0d1de0, 0xacd7ee1c, 0x40fcf452, 0x0743d9bc, 0x8ab713bb, 0xf513ab7b,
-	0x5104edbe, 0x124b400b, 0x89f4995d, 0xfab4baf1, 0x1cc86c9c, 0xd8e3cbb6,
-	0xc8504f2e, 0xccd4b77d, 0xf7435bf7, 0xc132fd5c, 0xd0c8218b, 0x413d5609,
-	0x4bc30324, 0x2a70c5c0, 0x0cbc3334, 0x015e19da, 0x02af0c1d, 0x89f8433f,
-	0x1ed80daf, 0xff656edc, 0x3a25f2e9, 0xd765cbb2, 0xcf97ed0e, 0x3c35f052,
-	0x57cb503e, 0xa63e3b9c, 0x8772f72a, 0x7cd8cbc5, 0x2f157be6, 0xec4fe226,
-	0x34de0317, 0xc0209382, 0x46264ce3, 0xdd78a6ce, 0x6b7ef7c6, 0xbae5c9c1,
-	0x6547c4b3, 0x1777adc0, 0xda97810c, 0x9e64f9a1, 0xb90327c2, 0xe951f8c0,
-	0x8dae48f5, 0x30dd2acb, 0x7b234c50, 0xc84f4d10, 0xc59675a0, 0xa7a71cd6,
-	0x5f3fb722, 0x7a8f5336, 0x66b4acb4, 0x5f90a90d, 0xe5154ee6, 0xd32f3589,
-	0xf3fb7d51, 0x71728a97, 0x81c1a94d, 0xcbdae85e, 0xfa825e66, 0x27dcadd9,
-	0xa011a337, 0xb672637b, 0x2b761738, 0x724dcaf7, 0x2fba5ae6, 0x580dba66,
-	0x0063b8df, 0x22d7ecfc, 0xb8bc91b7, 0xb37b1c45, 0x3aafd055, 0x2e4b7dd6,
-	0x2fb333d9, 0xb87486de, 0x28dd6d79, 0x18f79bb2, 0xa49ff8c5, 0x81bdc6da,
-	0xc49932f8, 0xbf7556bd, 0xc189ef58, 0xadb24072, 0xad0cc969, 0x59c75d4b,
-	0xe9d77bcc, 0x774fcde6, 0x023d206f, 0x15c70736, 0xbefb1463, 0x34c4cb65,
-	0x1d7030f4, 0x20475e56, 0x0b4d772e, 0xee91dd56, 0x1bc6847a, 0xf87c1388,
-	0x7529d108, 0x75cbe878, 0xc43b943e, 0xdfb581f7, 0xbd23eabc, 0x042e29f4,
-	0xae4df9c7, 0x475a71fb, 0x51902e93, 0x45fbf48a, 0x05007a2c, 0x9096be21,
-	0x0f107398, 0x1af04e6d, 0x77945e59, 0x99f9ca36, 0x8b03172a, 0x4fc43c71,
-	0x8b55cb99, 0xcc5422ee, 0x60937e6e, 0x16bdbba5, 0x179e686b, 0x724d3d68,
-	0xe4f881b0, 0xc607e268, 0xc76e594f, 0xf454fe0a, 0x9eb6f759, 0xa288c6db,
-	0xb2e4c20b, 0xaf89db69, 0x6f7486ff, 0x5071663a, 0x3e3c90f3, 0xe79c46b6,
-	0x46fa345a, 0x5d09d395, 0x9c383e26, 0xc5a2f5b8, 0x07d26ed4, 0xb7a4d9bd,
-	0xda06f727, 0xe81e7dc8, 0xc8463bde, 0x7fd7ea89, 0x7d8b9d23, 0xfc8cccf9,
-	0xf9104091, 0x839c5e23, 0x8af4fc73, 0xad5f0738, 0xeca93de4, 0x788b7de1,
-	0x573b8d54, 0xde2dbcf6, 0x6ff07985, 0x122bbd05, 0x713e967f, 0x6fc455e3,
-	0xd48bef91, 0x6949b478, 0x7bd7a2b7, 0xf227ed37, 0xc51351bd, 0xbfc345a3,
-	0xa27a6a37, 0xc8d1e396, 0xb9bd46f7, 0xb14afe4a, 0xa1f8a08f, 0xb436944b,
-	0x87c70b3f, 0xf709af46, 0x35c9fab6, 0xd3952b0e, 0xc7d60e2d, 0xe10e3d57,
-	0x6489e1ed, 0x9e5519e6, 0xd893ad97, 0x5af156bf, 0x49c9bcfc, 0x7e7e28eb,
-	0xe8cdfb14, 0xe97b8bef, 0xde913e4a, 0x837bd012, 0x2cc189cd, 0xb9ba67ba,
-	0xfe41df3b, 0x9d5a1ff8, 0x68430ff0, 0x503c6a7d, 0x4b54bf27, 0x2d8e87ef,
-	0x3f0b38c2, 0xa679eead, 0xd5e58ccd, 0x1055e9eb, 0x13f384a5, 0xdf2aafc8,
-	0xc6978329, 0xd543ef01, 0x39153b08, 0xc0e9a537, 0x188f8616, 0x0db008db,
-	0x29300f91, 0x4fcd8bf4, 0x39c7d4d2, 0x4ff4d02e, 0xd4d2cca8, 0xf788c5b7,
-	0xfa71e032, 0xef422a0b, 0x3f9d1248, 0x0083f4d1, 0xbd08adfe, 0x7e27b917,
-	0x4f7e4eea, 0x3ce06fe2, 0x2565f245, 0x7926f69a, 0x5dfc4cab, 0x435ea5fd,
-	0xa6529fcf, 0xb956f11b, 0x9c1cfd1b, 0xb69f4267, 0x01e0263e, 0x5bb317ea,
-	0x984bc9af, 0x85f2da6c, 0x629e4a79, 0xe4d58c2c, 0x2ef10629, 0x61d8fef8,
-	0x0545f31d, 0xbaaafce4, 0x006cf08c, 0x6f1a2daf, 0x5df840c7, 0x1c5ac6c7,
-	0x426a96f4, 0xc932cbcf, 0x8b4baa41, 0xb5b351ff, 0xd6ed1ff8, 0x52cc7be2,
-	0x9bd3be2d, 0xb0bef8b5, 0x4cd78b45, 0xd96f168f, 0xda6826eb, 0x346bdbdb,
-	0x578dbce5, 0xe45fda68, 0x8f29a19d, 0x4d7af17b, 0x858ec2fb, 0xaee2fa9a,
-	0x957a9ae5, 0x83e386cf, 0x11d5bef1, 0xdd03a6fc, 0x74a0f869, 0xf335cfe7,
-	0x9ff450fd, 0x05e8a79f, 0x2bd7fe85, 0xf8dde576, 0xb892f7c3, 0x7a158b4e,
-	0x50df3070, 0xee78e06d, 0x6d725b3d, 0xc505e91c, 0x7b14b9de, 0x894f3907,
-	0x1d9455b2, 0xa2bf717e, 0x36ab9f64, 0x2cf746de, 0x8a8afdc4, 0x09b5edc3,
-	0x1de23ed4, 0x494af4d6, 0xf91dde73, 0x67a66b2e, 0xd1209cad, 0x3f7144bd,
-	0x841ef231, 0xdeab3efa, 0x2739a319, 0x96bdee1f, 0x78c25f9a, 0x2f148c01,
-	0x3efccce8, 0x721fda31, 0x5fd9946c, 0xf6ffb373, 0x79cdc967, 0xfecc6ba7,
-	0xecefe20c, 0x79f5eeb1, 0x3aa3b788, 0x3dfd8d87, 0x00d6fde5, 0x2fdf8c6d,
-	0x3ca4ccf5, 0xbb8600e9, 0xdfd4d794, 0xbd2663b3, 0x5be5c45b, 0xac221503,
-	0xe68f3fa6, 0x71a41fb9, 0xbbd6480e, 0xbbefb14b, 0x20cf3e13, 0x73a2667b,
-	0xff3e12fe, 0xfc2f387e, 0xee147bfc, 0x406df50f, 0x79f0f367, 0x8e25cfee,
-	0xc1a73e53, 0x77e4c2aa, 0x4f79419d, 0xb9b6e22a, 0xb8d4be0a, 0xff328e6d,
-	0x29621c01, 0x5db9f3ea, 0xacbc667f, 0xe253eb48, 0x158766bd, 0xac71bfc7,
-	0x7bef84a5, 0x221d4b39, 0xb8e357de, 0xb1f7f231, 0x87ba67b3, 0x88ed22b5,
-	0x97869e26, 0x57cc8792, 0x42c5e646, 0x1fe316fb, 0x76cb1f58, 0x74fac0e8,
-	0xc6863fce, 0x85f9ca3f, 0xfbdacdb9, 0x3e5bf3dd, 0x02dff0d2, 0xfa9a27cf,
-	0x30d04a40, 0x781ff706, 0x1bd4f475, 0xaffd7f10, 0x9e282a98, 0xe4f5ba45,
-	0x0fc68795, 0x897797dc, 0xb4ce1bf0, 0x1d79cfcf, 0x5afdcabd, 0x5bfb9f75,
-	0xd03971f7, 0xefb8881a, 0xbfc4d1e4, 0x09fe342a, 0x0e8fc9f2, 0x431c234a,
-	0xe76673e5, 0x57a9388b, 0xabda7779, 0x55ed3bbc, 0x2af689de, 0x957b42ef,
-	0xbbeaa177, 0x9c095edd, 0x8e64bf74, 0x816a7ae4, 0x0f76efc4, 0x969b3ed1,
-	0x5de88b07, 0x60715363, 0xbbf3249e, 0x7df423dd, 0x45bb7788, 0x69f49592,
-	0x6ef435ea, 0xcf08f0f7, 0xd9d8b251, 0x50d789f9, 0x28d870bc, 0xc5f4a3e4,
-	0x7bd2666f, 0xdd53c7bd, 0x3fbf89c7, 0xf31f6495, 0x9f12ebf3, 0x6033832b,
-	0xef16719c, 0x13cbbf7a, 0xf32734e7, 0x0a89b9c4, 0xbd0be647, 0x9cb04a56,
-	0x2e6f72e8, 0x68dabbbf, 0x385777e2, 0x7617539f, 0x7df2221f, 0x4d1fc95c,
-	0x6a1fd23e, 0x5f2127de, 0xbbd3379c, 0xca675a39, 0x6ef126fd, 0xa0cfe02e,
-	0x0f747677, 0xbdf245ca, 0x1de29c1b, 0xf0a6de5e, 0xf90930f7, 0x45bd3dca,
-	0xb7a779a0, 0x7ec0e7b2, 0xe5af27d2, 0x53f393b9, 0x56c7ef43, 0x7f676fc6,
-	0xc6df20af, 0x797ae2f3, 0xee17a8ff, 0xc79cfa24, 0x7e56617c, 0xd7fff479,
-	0xf5bc3860, 0x5a3ff62f, 0xf77a1990, 0xaddef616, 0xaf2c3f20, 0x343faea7,
-	0x42e5e9ce, 0xe5a97bcd, 0x93dd8f43, 0x7486724b, 0x5948f911, 0x88633f9a,
-	0x05f3d3fe, 0x774feffd, 0x97f9a04d, 0x60bc8b37, 0x6fda6f88, 0xdce898f9,
-	0x3ef21963, 0x723fdabf, 0xf5b72b9f, 0x9f703e30, 0x617f68f3, 0xf08cbcfb,
-	0xbfb3eea5, 0x05a3ef7b, 0xdfdf73b6, 0x6e777df7, 0x6d71811a, 0x767950d2,
-	0x7e613eb4, 0x3fed4999, 0x8fedaf56, 0xb1e5390e, 0xd1de48bb, 0xe254e96f,
-	0xc4cbb21e, 0xee5daa17, 0x2920e254, 0x02ed83b0, 0x71724bcd, 0xfb61e4b7,
-	0xda3be6a8, 0x947fb424, 0x61af7057, 0x685f217b, 0x775f1071, 0x49f9ef22,
-	0x58cef41e, 0xc44773ce, 0x758b3fd7, 0xbc7844df, 0xa335aff9, 0xf2defe28,
-	0x38942b97, 0x72abd84e, 0x69cb3f85, 0x4147da7e, 0x996df302, 0x730abeb2,
-	0x55c9fb33, 0x5e4591e0, 0xac93c943, 0xdff1c1df, 0x141a01ff, 0x43d0aaaf,
-	0x000043d0
-};
-
-static const u32 usem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x1894738a, 0x18357a18,
-	0x326b3618, 0x31686830, 0x20318830, 0xaf8568e4, 0x9fa65371, 0x8181959b,
-	0x81f98817, 0xd7881058, 0x6c303133, 0xff5e2260, 0xfb045111, 0xc303209e,
-	0x197f2051, 0x6614ee90, 0x64055860, 0x2fe2031f, 0x1080be40, 0x100c8303,
-	0x606115ff, 0xc1d20530, 0xc4036c40, 0x9bf145c7, 0x7c80827f, 0xbf2a08bc,
-	0x279f8d1b, 0x25ff5f8c, 0x0ff2fc11, 0xc363c808, 0xc7e41632, 0x7a052247,
-	0x29370207, 0xca8ff2a2, 0x543c3033, 0x51d06060, 0x919bf082, 0x6280ede4,
-	0xec21e4c7, 0xb8c09229, 0x28b5ca07, 0x2a773762, 0x5004fe50, 0x34894bce,
-	0x41d3dcf7, 0x8434afe5, 0x3ebc00d0, 0x03a8e414, 0x000003a8
-};
-
-static const u32 usem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xc5547c0b, 0x3d9cf8b9, 0x926eece7,
-	0x2126cddd, 0x26c2bc21, 0xb80d4401, 0x41a00c40, 0x94520f37, 0xa2a1e1a8,
-	0x24786c22, 0xf622ef21, 0xddbf1f62, 0x52c488f0, 0xd4c51f1b, 0xb051768b,
-	0x40368bd1, 0x5c1758d0, 0x6d8b459e, 0xd5a045e8, 0x5e40137a, 0xa540b206,
-	0xcffd45b6, 0xdd9ccdf7, 0x26364e73, 0xf6ffef6a, 0x9fdbfffe, 0xcccce61d,
-	0x7cdf3337, 0x9be6bdf3, 0x91be6489, 0xf21387d8, 0x256efc25, 0x108951e4,
-	0x9b4e1892, 0x9fc6933c, 0xedb10994, 0x3bea247e, 0x9e0c8499, 0xd146706b,
-	0x64085fa2, 0x21064b4e, 0x758d65c9, 0x793dfa46, 0xe8bc7d91, 0x9819c308,
-	0xbdbae47c, 0x720c8409, 0x8266f6d3, 0x7fe92fbf, 0xc637b73f, 0x79c87491,
-	0xe131a285, 0xbc9a4afa, 0x877bfa48, 0x149bbeaa, 0x48dda675, 0xfd51fbfb,
-	0x9085b720, 0x4678c31f, 0x40cba942, 0x78b8e8b2, 0xfd2e6f5d, 0xaf0e3a3f,
-	0x295be8cd, 0x1c1a2210, 0x242444b1, 0xa0482326, 0x679fbe9d, 0x49d7ed3c,
-	0xaa36a708, 0x49e74ac8, 0x0896b4c8, 0x808972f5, 0x76cd8878, 0x78e97b25,
-	0xe22e7d57, 0x220d57bc, 0x27d69da4, 0x684ed392, 0x61c4953a, 0x232dc7bd,
-	0xd57e4206, 0x07123fae, 0x199b1b85, 0xdc155e24, 0x0e210f06, 0xc7afc513,
-	0x8f2ae98c, 0xc4c9a79d, 0xab210d71, 0x574c0e3d, 0xfa634679, 0xdb27d0d8,
-	0xf9d00673, 0xe9d8320c, 0x63834848, 0x1191dda6, 0x2dc72786, 0x0938e730,
-	0xae2926c9, 0x2f5a54c4, 0x4dc840d1, 0xf342dc84, 0x19082375, 0x5084ec49,
-	0xbc933dfc, 0x019dca2c, 0x45e60779, 0x7cc37103, 0x2e033263, 0xc62de291,
-	0x1c95cf69, 0x1bf8efe1, 0x785fdf80, 0xc1d6152c, 0xefcc1b7d, 0xf0ece219,
-	0x46dd9e02, 0x7f5a26e7, 0x5e4ceca5, 0x468ae14a, 0xad832eda, 0x1e1094bb,
-	0x1fc04cdf, 0xc9cc8fed, 0x30d7acd5, 0xb4224718, 0xeb05dc73, 0x75b27164,
-	0x1574095a, 0xf2e61d61, 0x77655875, 0x38fd19d9, 0x11fa2449, 0xb1fa5aed,
-	0x8fe96864, 0xba9fb17e, 0xbf69e79e, 0x3bed424d, 0xbd3ce953, 0x4dce0c4b,
-	0xa160dbf4, 0x0af80051, 0x80c425bc, 0x41f92afd, 0x63a05265, 0x179e1ab4,
-	0xf6f7e9cb, 0xefcf730e, 0x52e2062d, 0x2a5372e8, 0xcec4777c, 0x6626e3a0,
-	0x6b4cec47, 0xe987f1cf, 0xc925d924, 0x4c0eef40, 0xac47041b, 0x477ce300,
-	0x9c049b24, 0xf6a4727f, 0x08edd3ff, 0x377ae1f1, 0xda5475f0, 0x3d203c51,
-	0x468b1f79, 0x3450883c, 0x17e70c39, 0xad17cf1c, 0x4a434f45, 0x5868e348,
-	0x875f9a5f, 0x79a663f4, 0xb09be62b, 0x3fca1edc, 0xacc9e58b, 0xba5e5d3e,
-	0x55e3bd18, 0x6eda1759, 0x4291c203, 0x38445e70, 0x9bbf5096, 0x94203f30,
-	0x1fd625ff, 0xb7f7eaca, 0xceed251f, 0xf9c29e0d, 0x003b2ebf, 0xd6dbc29f,
-	0x2e94adc0, 0x7c106e0e, 0xec0f9a26, 0x75fe418c, 0x9f0cfd7e, 0xd767e289,
-	0xea0b9338, 0x8398df9f, 0xefedbcf9, 0x5e5a24db, 0x20945db5, 0xd679d86f,
-	0x5bf141d6, 0xfc7f6a63, 0xb83dfa66, 0x602f245d, 0x9f71d377, 0x48b4e29d,
-	0x92f9633e, 0xdaad9628, 0xc01e6bb0, 0x91336b2d, 0xeaa70a28, 0x6f3bd2cd,
-	0x03d2f9a6, 0x552a8132, 0x838cea9b, 0x4f897e69, 0x8afc8168, 0x3f601f9d,
-	0x0ca4b9dd, 0xe039f7f6, 0x752f945b, 0xee93dadb, 0x7dcbdfa6, 0x7ea00a5b,
-	0x09c166f9, 0x7ebe5c4b, 0xbf0087d7, 0x211e55bc, 0xcd15f852, 0xdaa1c431,
-	0x17db792f, 0xade309df, 0x9426477a, 0xabb291ed, 0x1891190f, 0xe02346a4,
-	0x13d36ab5, 0xe79be046, 0x1fb0073c, 0x2f559f05, 0xbb687ed3, 0x2704d7ea,
-	0xc0daad4c, 0x3785cdf8, 0x68bce6a3, 0x19d57981, 0x37fb4147, 0xbd42351f,
-	0xebf15f52, 0xdf180e51, 0x8c016306, 0x6306fd73, 0x566f8a89, 0x3356ff34,
-	0xe94d53ae, 0xbd19dd03, 0xce39e7af, 0x397c95b7, 0xdf484015, 0x4338cf92,
-	0x339e87c5, 0x57fd21c4, 0x11c48b34, 0xdf781f81, 0x8760fbe7, 0xbe03f195,
-	0xc0ed4b5e, 0x75ebc21a, 0x4fd7cec9, 0x88cd660a, 0xe71ee7c0, 0xcb91a3f2,
-	0x7e41278f, 0x2e69f4d0, 0xf971d63f, 0xe271e4d1, 0x933d67f7, 0x71ef5d30,
-	0x67bcfa61, 0x4f3ea61a, 0xc17bd611, 0x8dd30733, 0x7f7e371e, 0x698653c9,
-	0xbf16a7b3, 0x8e59e2bf, 0x178f66e9, 0x59e6bfbf, 0xa78b6983, 0x9eadd311,
-	0x3d5b4c26, 0xbaf7ac3e, 0x36d319a7, 0xff7e0b4f, 0x530da7b5, 0xe98027bf,
-	0x9a5f584e, 0x98ed3c06, 0xc31cf6ee, 0x03a7af74, 0x9cf7eddb, 0xc72d74c1,
-	0xe49b2dbb, 0x366f1448, 0x18394117, 0x91cae85f, 0x88be3e69, 0x7ae693e5,
-	0x9f348c73, 0x8a79a6e4, 0x8195c1c7, 0x0fcd131c, 0x29e565ae, 0x66b9243f,
-	0xb2f14f9a, 0xaeb5b4f2, 0x4f9a28dc, 0xa3e5646b, 0xa3737bd6, 0x8f947e69,
-	0x39b75f95, 0xf3431b90, 0xf2b0b5d7, 0x67927eb1, 0x01b1f9a1, 0xd07f1f96,
-	0xf9a56795, 0x9f2cedf1, 0xcf37a1f5, 0x1d59f346, 0x5d4dfdac, 0x9a58bc81,
-	0xcac829bf, 0xf24ab96f, 0x2e4003ed, 0xb5cf980b, 0xd1c7e4e4, 0xe59dae7c,
-	0x4b16860b, 0xb7f4088e, 0x0858ee53, 0xb0867c22, 0x7e5125d1, 0xf1d8d3b3,
-	0x647d1510, 0x4baaf0a1, 0x2033fca2, 0xfe504593, 0x963af0b0, 0x19648c07,
-	0xbc2a3f94, 0x65bbe58d, 0x5cff9607, 0x46f2c038, 0x87ff9607, 0x7bf30870,
-	0xef961765, 0xf2c4fe10, 0xff961746, 0xf981385e, 0xcb1bb2fd, 0x962e853b,
-	0xfcb1ba37, 0x5753e949, 0xdf2fed3e, 0xdc2e9ee0, 0x5ddb7208, 0x6a597286,
-	0x597e0649, 0x04fff9cf, 0xaf2d0640, 0x3944641f, 0xacf3f3b8, 0xd3814517,
-	0x97c800f6, 0x05fa04bc, 0x485b3385, 0xc2827d04, 0x7386fb11, 0x349317cb,
-	0xa2f96e70, 0x20f3814c, 0x1fea89c2, 0xdc5f9d9c, 0x17cf1da4, 0x129c0ae5,
-	0x7fb5979c, 0xcbe5baf3, 0xbe78ed6c, 0xd4e054ac, 0xfeb89c20, 0x4f20278d,
-	0xc809c0d4, 0xe59c0aa5, 0x7fb12708, 0x271971e3, 0x8cb8e06b, 0x7538144b,
-	0xff506708, 0x378c04e0, 0xac63c76b, 0x863ce050, 0xbfd61e78, 0x534cb979,
-	0x5531e3b4, 0xc29e7029, 0x0ff6a4f1, 0x16ab6ece, 0x21adbb3f, 0x3847acfc,
-	0xaf37fb23, 0x3f169b5c, 0x7e10b6b9, 0x6b9c2136, 0xb76707fb, 0xdd9f8b4d,
-	0x5e7e10b6, 0xe98cfc43, 0x6372bcdf, 0x8dc9f8b5, 0x0de7e10d, 0xfeb8cf1c,
-	0xa26f678d, 0x137b3f16, 0x2009f843, 0x37fb1b9c, 0x2d24fc9e, 0x4293f27e,
-	0xe10779f8, 0x9c1fee4c, 0xfc5a49bd, 0xe10a4dec, 0x67080fe7, 0x95e6ff4a,
-	0x9f8b503f, 0xfc2181fc, 0x7270807c, 0xa94ccddc, 0xbdac70a4, 0x4c3fd9c3,
-	0xc3fd9f8b, 0x8939f842, 0x3852a670, 0x29c37de9, 0xa7e2d148, 0x9f842520,
-	0xb6e708f3, 0x9fd9c1fe, 0xfecfc5a2, 0xae7e1094, 0xfa3b9c20, 0xe182af37,
-	0x0c14fc5a, 0x55b9f867, 0x8672871a, 0xd8274eca, 0x9a19dfe7, 0xc13212e3,
-	0xd179624e, 0xf7a024ee, 0x433e8a88, 0xad225dda, 0x371cd96f, 0xd6a231fe,
-	0x068d726b, 0xaa56cf4a, 0x9af5a9e5, 0x1ad149d8, 0x15ce2a3d, 0x4c27c9af,
-	0x9fa9ac1b, 0x29a69458, 0x3ae7381f, 0xf720f94d, 0x487e4d78, 0xfa9a4dd9,
-	0x35736ac3, 0x6fcbe1f9, 0xf54fd4d7, 0xd3e4d4ce, 0xa9afdcd7, 0x8171b23f,
-	0xa69afca6, 0xb5f94d72, 0xfc9aa5be, 0xd7dfcdf5, 0xb2d31fd4, 0x437e5342,
-	0xf29a63db, 0x35278171, 0x9e0709f9, 0xb1bfd4d5, 0xf94d05fd, 0x68af63c4,
-	0x6c7727ca, 0x3e6fe4d5, 0xfd4d6bf3, 0x9addc129, 0xbd9fadfc, 0x439fa9ab,
-	0x6fab53fe, 0xd4d03f9b, 0xa13f6a9f, 0xf24eff29, 0x553d3a27, 0xccaf1f6b,
-	0x32afcc21, 0x01afd988, 0xc6f311ab, 0xa76616c1, 0x271c4b58, 0x7718fd29,
-	0xa00c742f, 0x033403f4, 0xe0ce5176, 0xe83a6bb2, 0xe4ddeff7, 0xbf4ec6be,
-	0xbee8cf7f, 0xbf411ec1, 0x9026f4a1, 0x061d4864, 0x8fe5f548, 0x73de8cca,
-	0xd51d5c87, 0x18d7db49, 0x68e2a382, 0xe73123fe, 0xf9c7a03e, 0x83ee0306,
-	0x42d49168, 0x411368bd, 0xd4d1e9bb, 0xaabd17ac, 0x1866b0fd, 0x308433d5,
-	0x3bb235dc, 0xc328f519, 0x9bd03af8, 0x79d187ea, 0xd164260d, 0xbcbb718a,
-	0x61fb6823, 0x8fe0c925, 0x3f991930, 0x91bfd424, 0xfd819ff6, 0x6bfe812f,
-	0x94dfe97a, 0xbfd34936, 0xd34ca539, 0xfb48d9bf, 0x90f213b7, 0xbfde26e1,
-	0xcb36fd19, 0xfec64c56, 0xd865294d, 0x6a46a3ff, 0x8ffba977, 0x88fff50e,
-	0x31ebf681, 0xc7b9bb30, 0xd26ed3fc, 0x5ca53fce, 0x9b237f3b, 0x2e434aff,
-	0xe71a3fef, 0x0e456abf, 0x394a7f9b, 0xc189bf9b, 0x0b6ff50d, 0xfa01bfe1,
-	0xfd2f69ff, 0xb5b3d29b, 0xa95e1ff3, 0xf589bf9d, 0x76e194ff, 0xfb05bfde,
-	0x6dc57a7f, 0x2bc3fe6c, 0xc9a37fb1, 0x31fa04ed, 0xf5ae890e, 0x50c9fed1,
-	0x040d256a, 0x40fda172, 0xfd1e3a3a, 0xd21a7708, 0x8bdf1c70, 0x2576f466,
-	0xf21bd29a, 0xc3b32f33, 0x5273947d, 0xd39aaabb, 0x1ce6c57a, 0x2c3df023,
-	0x3164224f, 0x36a2ea1f, 0x3c9be911, 0xa48df26d, 0x26d0bde3, 0xe8bf217a,
-	0xe03e29e9, 0x322635af, 0x49da08bf, 0x3fdf0024, 0x1798d9fe, 0xa7d2f3d4,
-	0x53e51b8b, 0xde45fc91, 0x96ba325c, 0x1002ef8e, 0x9c7f2a81, 0x186071da,
-	0x1eed487f, 0x139fed42, 0x23efeb32, 0xbe41ef6a, 0x687bda83, 0xe63a9338,
-	0xdebaf357, 0x5fc7411f, 0x0b9f9444, 0x6e2f79e7, 0x624f0a29, 0x5af8f7fb,
-	0x31eb07c1, 0x450c797f, 0xc53c787e, 0xbe4d04de, 0x07eac4c6, 0x2f7c136f,
-	0x0dc30808, 0xe1c199f8, 0xcd2f1811, 0x36b3b1cf, 0xb1de7747, 0x7dd1b05f,
-	0x5d0866b4, 0x599c308b, 0xa40f25c4, 0x565eefed, 0xa76b832c, 0x8186105d,
-	0xa166b09f, 0x3768024c, 0x0649137b, 0xde3a0e27, 0xfe0cedfb, 0x527c970c,
-	0x239b47ed, 0x74455d9b, 0x458a733c, 0x69acff1c, 0xed3ff2da, 0xc619718c,
-	0x53cd74d2, 0x45ddcfd8, 0xe77bf2da, 0xb9f7f368, 0x572a79b5, 0x0fab9065,
-	0x53bfe994, 0xdf8124b4, 0x001bf431, 0xe3907ce3, 0xd95ac1e1, 0x6a5759ab,
-	0x72951b76, 0x09b88470, 0x8bdb0bce, 0x5fcfeb3d, 0x7b17cdae, 0x6b85f9b5,
-	0xdd39f074, 0x7febe29c, 0xa683e81c, 0x283e81a7, 0xfa724f3e, 0x2d55f308,
-	0x9a13dc7d, 0x650fa306, 0xb624a71e, 0x33d6a704, 0x18dc58fa, 0x8a1e9913,
-	0x52e0f443, 0x0f4297d3, 0xfc3d38f3, 0x6943d399, 0xeeae9693, 0xc9d5be23,
-	0x6b03fdb4, 0x1d3ae177, 0x3d198a11, 0x87a140fc, 0xb83d0d0e, 0xd7e83d39,
-	0x87a71e6f, 0x7a308f79, 0x0767afd0, 0xa68e87a7, 0xeb4932cb, 0x1d74aeb9,
-	0x0eba7934, 0xa3b775ba, 0x47ae8a1f, 0x10587a44, 0x389d379a, 0x65e42fcd,
-	0xd38bd63d, 0x01a79603, 0x09e209da, 0xacf7a7db, 0x2684f94f, 0x7914da5f,
-	0x36da6bfd, 0xfaa93dac, 0xf2f2d55e, 0xbb7fb55a, 0x268b79a2, 0xa6f7c4bf,
-	0xd3697ea6, 0x717e4d2e, 0xfa9a3be3, 0xd21cd70b, 0x7fbd8be4, 0xbf9fd4d4,
-	0xfe5353bc, 0x4d59ed60, 0x176503f9, 0xdcfbf935, 0xbfd4d37f, 0x13f08e77,
-	0xa2eefe75, 0xeba89fa8, 0xa7169acf, 0x0d70cfc9, 0xec37d4d2, 0xa02ef6bc,
-	0x8bef83c7, 0x4f8ff404, 0xffd1a79d, 0x7653a9f9, 0x1e939d42, 0x5383ee07,
-	0x9e98d19e, 0x9f7138f1, 0xc24cf39c, 0x1edb42f4, 0x2a15c80b, 0xc8e04b47,
-	0x96e574a6, 0x20d935ba, 0xdfca09d7, 0xd46f958a, 0xb2128779, 0x8a639414,
-	0x2326c2ef, 0x44204c09, 0xc7c4e100, 0xe5551415, 0x37947d1d, 0xd0914151,
-	0x23b0bcb3, 0x279af7f2, 0x23db878b, 0xf7847f9c, 0x7a021935, 0xe72f7752,
-	0x29029524, 0x64277f52, 0xad81f205, 0x34a94f5c, 0xb9517e32, 0xb12e5075,
-	0xaa303e41, 0x6bfaabf6, 0x206c9ba1, 0x66ba49d0, 0x5d36973f, 0x04f7e1af,
-	0x4089cfbc, 0xdf34136f, 0xd66f9a2b, 0x25daebb4, 0x81abb8e2, 0xfdb95097,
-	0x527a292a, 0xd8153e04, 0x0c6b3293, 0x14f5d38c, 0x5112dbe6, 0x34f2ec8f,
-	0xc7f385af, 0x4c169e73, 0x30da78cf, 0xac09e53d, 0x93c07385, 0x1e98039e,
-	0xda63b4f7, 0xe98639e1, 0x4c0e9e47, 0xc19cf43f, 0x209e4ff4, 0x9f3cc7a6,
-	0x43c47a61, 0x0e70027e, 0xfe98cc7b, 0xb4c763c1, 0xe98c93dd, 0xfb0f8f05,
-	0x5f5df651, 0xcb867774, 0x7f4073ed, 0xbb6ce811, 0xcd6eac78, 0xbd9d30d0,
-	0xa423f2b9, 0x85cf0533, 0x0f4e264d, 0x087a1a49, 0x2377ed80, 0xe51f4bd0,
-	0xc3a7324d, 0x2e47dade, 0xbfe179af, 0x7caede87, 0xd30b7a4b, 0x3d1d10d3,
-	0x4f45f7a5, 0xe9e9aa1f, 0xe4cec18a, 0x1fa7a720, 0x7d6b73f3, 0x3b1251bf,
-	0x77e90ca7, 0x800cdbae, 0xdcfca5aa, 0x98699084, 0x5efbc4bf, 0xa3b5c149,
-	0x0d1be81e, 0xe8d2eb72, 0x73828fbf, 0xe8c74b87, 0x3ef6a7e2, 0xf49d3d3f,
-	0xda17778e, 0xba3e2543, 0xc61109e8, 0x1af0cd1b, 0xc8d32065, 0x461a4278,
-	0x905ce4be, 0xc4897981, 0x739f7b43, 0x3af38446, 0xc06b7542, 0x5d785f6f,
-	0x1632bd69, 0xf67a9de0, 0x5e90591f, 0xf475fae1, 0x7cf5111e, 0x09d17812,
-	0x25c90df8, 0xfc193393, 0x4691c1f3, 0x6409ea3b, 0xde7f16ba, 0x6bf835db,
-	0xcfce5548, 0x7f11931b, 0x1a8cae23, 0xf5fc0fd4, 0xc2fbdfc5, 0xf79802e7,
-	0xfb3e037f, 0xf17d8fe2, 0xbc72e245, 0xdfe746d6, 0xf8cc73bd, 0x07c01cc7,
-	0xcadf1abf, 0x3c7e9c79, 0xb5f492f9, 0x493bb8e8, 0x14f6e3a1, 0x24d85b88,
-	0xa5fe11da, 0x61626bd6, 0xfa70425d, 0xede14f58, 0xbd80a73f, 0x0b553e7f,
-	0xef074b2f, 0x6d1781d2, 0x4d2d7760, 0x3270d85e, 0x69283ac2, 0x835d4b55,
-	0xb687ad45, 0x1a97f369, 0x382d6985, 0xecec472e, 0x6a272031, 0x5edf181b,
-	0x6702a98e, 0xf6097269, 0x3d39ae73, 0x3e7bd996, 0xc7360fc6, 0xe738bf21,
-	0xfffac329, 0x06f4f1ec, 0x210f1947, 0x1984e4ad, 0x4b2d31f8, 0xaf7ebdef,
-	0xc5fd2cf4, 0x7edde788, 0x89e80af9, 0x97dffa66, 0x09107760, 0x9adc0af3,
-	0xba6bd116, 0xd66fbe01, 0x39db47f4, 0x2fe23394, 0xdf6abed3, 0x4294e448,
-	0xd45e54b7, 0xe780bd83, 0xd41a4b9b, 0xcb55597a, 0x9af93577, 0xd41a47b6,
-	0xfc055c7a, 0x525ff283, 0x3740482b, 0xba8c9c95, 0x811acb25, 0x8218af8e,
-	0x088f804f, 0xb9955eac, 0x9fa6e8c3, 0x75b2b7ce, 0xe77c6deb, 0x8854e63c,
-	0x3733283b, 0x597239e2, 0x20f9b5cb, 0xaeb7ce67, 0x5bf9024c, 0x5efa5e21,
-	0xbff68451, 0x5f2e0494, 0xcf56a0e4, 0x2841f4e7, 0xe9bcd55c, 0x17c212cf,
-	0x981977cd, 0xb70f465f, 0xbe91cb8d, 0xf9bd53f0, 0x8ecdc150, 0x6eaa789e,
-	0x237468bb, 0xcbffa45f, 0xc149e30a, 0xd454b15f, 0x9771d126, 0xffa27737,
-	0x1dec8ce2, 0xe0af83f5, 0x67e73d97, 0xa3153e49, 0xb497979a, 0x260b3f43,
-	0xe3888ef1, 0x1f280fde, 0x995bfb3f, 0x57221f00, 0x742cad69, 0xc7bb70cd,
-	0x61590c40, 0x6b4167bb, 0xfbe02145, 0xd1d3ebec, 0x8a445bee, 0xa40eb86c,
-	0x9cec0b31, 0x7180c4f3, 0x1fc9e755, 0xeb54136c, 0xe464b1f0, 0x305ca678,
-	0x1034bb89, 0xd8107bbe, 0xf539a65f, 0xf858e2ed, 0x9076292e, 0x15ca25f0,
-	0x17f180b7, 0x2f77d873, 0xfd01d731, 0x634a7b52, 0x4a7b51af, 0x94f6a793,
-	0x66425f26, 0x453c4126, 0xf132d3c9, 0x4d278809, 0x8ec941f9, 0xb5252be3,
-	0xfd1fa0f5, 0x16e1fb9c, 0x843489d8, 0x37aa87ca, 0xa62acb9e, 0x9892e9f3,
-	0x0f894bff, 0xc5654258, 0x5e5e5a20, 0x2cba33e6, 0xa277e73d, 0x943dc275,
-	0x163c03f3, 0xd1bf7007, 0x886be2c7, 0xaae2ca43, 0xf3ef5a4f, 0xba2ad81f,
-	0x8f506ca2, 0x9bc6577e, 0xafe7f5fa, 0x4f212f9f, 0x9bca3ce2, 0x561c6067,
-	0x3e07788f, 0x7059b91f, 0x27ec22f9, 0xf1341651, 0xc332092e, 0x1ad7e29f,
-	0x0f5fcbae, 0x6bdf9579, 0x1bfcaea2, 0x440197f3, 0x258a5fc3, 0x913970f7,
-	0xbfc013f1, 0x7f710520, 0xc9f8637d, 0x2f5fe03d, 0x844ff8df, 0xefbb543f,
-	0xff89fc29, 0xe88ff1d4, 0x48bcfe31, 0x78deabf0, 0x778875f5, 0xcfd5ff2c,
-	0xb7ee846c, 0x926352b3, 0xe57bae93, 0x1736d5a6, 0x6bc91df0, 0xd6717d83,
-	0x448b4e27, 0x7997df0f, 0x59711fdc, 0xc2bbf004, 0x73fc293f, 0x4ef8fcaf,
-	0x6caea3b0, 0x4fe8ed92, 0x4c05366d, 0x5bab9e94, 0xb1921497, 0xf964ef98,
-	0xfd022f47, 0xc7c9b4d7, 0xfe5a74d5, 0x41259fcb, 0x94a5107c, 0x48648621,
-	0x549f6803, 0x00b8fc6f, 0x121a8df4, 0x6faafdc4, 0x167ffd07, 0xd8b0f28f,
-	0x1cb3db18, 0xd049341d, 0x5a6afd9e, 0xb4517c7f, 0x69db7a41, 0xb2d46fe0,
-	0xbe90bf44, 0x3bb7195d, 0x00eb642a, 0xc913abe4, 0x0aabe044, 0xd98f885e,
-	0x7e5f2b1d, 0x1d276c66, 0xdfc6d757, 0xbe1504da, 0x52e97b14, 0xfc5fc2cb,
-	0x1f3bd1da, 0xa3f740bf, 0xe455bf5a, 0xdb8da394, 0x56967e4b, 0xc41b01ca,
-	0x906e5573, 0xb9fa5e9d, 0x5f17d5f2, 0xd9fc167a, 0x4739347f, 0xaf15f852,
-	0x13723bee, 0x916c57cd, 0x69b21407, 0xf0a48458, 0xffd0d4fa, 0xaf0f8f96,
-	0x7db6f947, 0xf618c746, 0xe1f187fd, 0xb2d8a975, 0xf4c648cb, 0xcb5e47c4,
-	0x2587632e, 0x74b4fac2, 0xb7fe8016, 0x1abfe5f2, 0xdd9def81, 0xa9819029,
-	0x61b9f011, 0x8087ea1f, 0xbe4f5c27, 0xd3f5a15e, 0xeba1afd5, 0xbf467202,
-	0x857afa5e, 0x5c00bf9c, 0xf4a1b388, 0x21afdafd, 0x264fee0e, 0xeca1e027,
-	0x306c87b5, 0x2d52d39f, 0x56e7f3a3, 0x2bbf0127, 0x7649bd93, 0xb2f7d94c,
-	0xfa461fe7, 0x70f43d2b, 0xba57f312, 0x76501906, 0x3cc1077a, 0x1bbfaf17,
-	0xdc4259e7, 0xcf658748, 0x9a3e4589, 0x69912a7e, 0x93ec225b, 0x9c9f7c4b,
-	0x2e2e817e, 0x4569e79d, 0xe441fc2e, 0xe8bbe172, 0xcf987d0f, 0x98906a85,
-	0xd6ccd4ff, 0xd06c80eb, 0xfd10d1c8, 0xe5147c6e, 0xae61b9c7, 0x56ee7081,
-	0x28179613, 0x5343c447, 0x6275b207, 0x51db0772, 0xdf0793b9, 0xecbb7ea1,
-	0x69ab1a8a, 0xe9467287, 0x9fef197f, 0xf41a3b8e, 0x9149d3b7, 0x46e191ed,
-	0x3d500f85, 0xaa674543, 0xfff6cefd, 0xdfb606c6, 0x9beffd95, 0xffca0d31,
-	0x23ed9872, 0x97720768, 0x10302b8e, 0x16cd77cb, 0x48983f90, 0xdf3ed220,
-	0xae7df328, 0x0bd3d72d, 0xc424bf1d, 0xfa06e8aa, 0x4075c789, 0x34f25f79,
-	0xa3e2af6d, 0xadafd035, 0x1f655c27, 0x707e7297, 0xf5c1f81e, 0xd6407e61,
-	0x5e2bf627, 0xbdf652b4, 0x5fec2cf4, 0x0ebd5fba, 0x1172bfd8, 0xcd93ffcc,
-	0x4fdc8e7b, 0x2d27edf7, 0xf2d5beca, 0x2dbefd55, 0xc630fadb, 0xedf7eb9f,
-	0x496b4327, 0xbf4b7dc4, 0x43b7dc47, 0xf847fe3b, 0x24c782aa, 0x2aaf96a3,
-	0x7c37b27c, 0x16e4f9ea, 0xd57881d9, 0x3bfa49f3, 0xd27ab24c, 0x0a8742a3,
-	0x47ff95fd, 0x47e070d5, 0xe8553a21, 0x0aa74430, 0xade7ea1d, 0xfcbea3c5,
-	0x522df023, 0x537a297a, 0x4a95f3c6, 0xa6038b3f, 0xc90ff6ed, 0x50b97c44,
-	0xfdc691cc, 0xf3a80643, 0x45be5d3e, 0xcba5df57, 0xbbeae917, 0x4d5af975,
-	0x3db6cafd, 0x10748246, 0x9713d4d0, 0x31393bff, 0xfadd1221, 0xf5a1bf98,
-	0x39ee11a2, 0xd88258d4, 0xbc415e5e, 0xdc191f10, 0x51b9e221, 0x3d71c537,
-	0xa73637f8, 0x8f94bcfa, 0x7e628eac, 0xd07b6e85, 0xd5d34f16, 0x4c1f2c71,
-	0x1f03d634, 0xa307be54, 0xbbb1df98, 0x538b6828, 0x7e9d5bd9, 0x8778f911,
-	0x0dbdf22f, 0xdd70692a, 0xd7b97a3b, 0x758f9ca1, 0x62c6db47, 0x3e29d17f,
-	0xa2a9c7a0, 0xf8396525, 0x27451aa1, 0xea8bece8, 0x79c1b5ee, 0xfd3fb755,
-	0xfbf439ae, 0x164477e2, 0x4975e38e, 0xd0765483, 0x975de219, 0xf05c402d,
-	0x859fa45a, 0x2d17667e, 0x3f791b5a, 0x2576f394, 0xe0466596, 0x390ed4bb,
-	0x51ef3eae, 0xd7ad94e0, 0xe74ff77d, 0xed11a6fb, 0xda8df2ff, 0x9fb73772,
-	0xfce4647f, 0xc7191c67, 0xbfe657ed, 0xaa7b7ce1, 0x1cd77198, 0x07dd3eba,
-	0xf9a26244, 0xd7117e4b, 0xc166d2e7, 0xe237fe07, 0x57fdc44d, 0xf546824d,
-	0xd82e887d, 0xcef4d75f, 0xffb6bac7, 0x4007eb39, 0x307faf47, 0xda69dff6,
-	0x471ffaf5, 0x37f905bd, 0x407ca68e, 0xdbcfd67a, 0x02f18519, 0x48ad3bdd,
-	0xde3bddff, 0xe401f94b, 0x613934df, 0xff3bdd9c, 0xa9e8163a, 0x0ca9857b,
-	0x30f760f8, 0xb95dbfe6, 0x3b63afe3, 0xc2aefe50, 0x1a366c75, 0xffc99f99,
-	0xdee08f8f, 0x9d3f25c2, 0x3c17e815, 0xd7e6beae, 0xf0823e51, 0xbea59aff,
-	0xe76df40f, 0x43e3cd53, 0xce64adba, 0x1c5f1856, 0x79a87f8b, 0x758bf26b,
-	0xd6aaffb4, 0xb485c65d, 0xcfedef3c, 0xfd1c62c7, 0x5d37a656, 0x879e3b90,
-	0xc66d87f8, 0x2994acef, 0x26c02f9e, 0x5df646a3, 0xb07935a6, 0xe5e27a8f,
-	0xf5a7f473, 0x1aef1f17, 0xaffd7d99, 0xc5c10f8f, 0x67d59ff8, 0x7fde6016,
-	0xf403e8fb, 0x2e909a83, 0xd27ef995, 0x4cfa8752, 0xfb3ef35f, 0xfa0e86bf,
-	0xd0216f3b, 0x4d9b799f, 0xfdebdaff, 0xeb81d1b8, 0x3d07dfa2, 0xf7c77ce9,
-	0xd5aaff30, 0x27ede389, 0xfd368fbd, 0x5beeb63f, 0xfadbbae9, 0xfe77f79e,
-	0xfbdde7c5, 0x8f33bfba, 0xce1dbbaf, 0xfede6b53, 0x75f7c71c, 0xffe95cf9,
-	0xf457ba52, 0xad4376fd, 0x6f8e933d, 0x82b4690e, 0xe25f7162, 0x03a64b25,
-	0x0f2f70a2, 0x383bf8c0, 0x57608d5f, 0xbf989935, 0x581824cd, 0x82dddabc,
-	0x3b4447e2, 0x5fae4eeb, 0x0cb439dc, 0x5d3b90f5, 0x827d413f, 0x39edb548,
-	0xee7b7eb4, 0x6ac62742, 0xdcc7f192, 0x853d9f90, 0xe6f6b5e7, 0x12e204ef,
-	0x677f7ea8, 0xa003f4ee, 0x12e5dee7, 0x29a60f51, 0xa7efbfea, 0x93efb014,
-	0x7dd0f6b4, 0xdefe6d6e, 0xddfcda39, 0x843dde1c, 0x229eff8d, 0x587e07c1,
-	0x8953ce53, 0x2d3597e0, 0x0a908996, 0xabb54671, 0xbbb8eec1, 0x197edb48,
-	0x7f2a6728, 0xe3c537e3, 0x5c78436f, 0x3921788a, 0xed03de22, 0xdc7c8f13,
-	0xf9c7b3ed, 0x489ace20, 0x7bc7864e, 0x37e89caa, 0xccb8f6e7, 0x3596cbdb,
-	0x659fb0ed, 0xd8ae1d9d, 0x9be1bdd3, 0xe11cfb70, 0x2ff185a4, 0xcfb444bb,
-	0xae7d9d65, 0x5dd7cbac, 0xbf1d650f, 0x073cbaed, 0x786372eb, 0x5c5a865d,
-	0xccabf604, 0x8b7c87ed, 0x1687e593, 0xe8ae7611, 0x00d2fac3, 0x8466f117,
-	0x9897d1e3, 0x9ce02b8b, 0x405a3ccc, 0x6b5dc87f, 0xe60f9445, 0x55c7010c,
-	0xf8c64934, 0x450d8fe3, 0x85deb059, 0x7f562613, 0x09c30d9f, 0xf1c25cf8,
-	0x516a425e, 0xbf57257f, 0x0b3b32fc, 0xea0825ce, 0x845c4bbf, 0xb8ed41dc,
-	0x10216c92, 0x126af10d, 0x078ec6f1, 0x8e40b93f, 0xdae4fc6b, 0x496efc3c,
-	0xabe9c30a, 0xe5fc6f7e, 0x17fe9d9f, 0x29c767e5, 0x3a427491, 0xd497bb12,
-	0x3f7cf776, 0xa54d63c3, 0xba434be0, 0xfbeac80b, 0xb66605d3, 0x87ebfe0f,
-	0xe64f9013, 0x2c4c74fc, 0xe26407f3, 0x6e1ac47d, 0x3af25c37, 0x760fc162,
-	0xcfce9fc9, 0x6a6cf373, 0x87a4aabe, 0x9ffe1db8, 0xd3489710, 0x51a17cee,
-	0x048b3b04, 0xcdebffd1, 0xc57bc28f, 0xcca376fa, 0x6bafbe06, 0x3f002fd1,
-	0xf2afee11, 0xa6d29479, 0x75aaf1b1, 0x59c77b5b, 0x75cf6c69, 0xd571df80,
-	0xc5b7ddf9, 0x80fdd82f, 0x1d5143d7, 0xe6114505, 0xafe3893b, 0xf0dff770,
-	0x7f4ceafe, 0x99780caa, 0xce6a2f99, 0xee669df9, 0x264098cf, 0x770ab8c0,
-	0x0c9b66df, 0x744072eb, 0x1ad57dc2, 0x3ba345ff, 0x1eb1f9c2, 0xfc1f009f,
-	0x676427f0, 0xc4f3e009, 0xd808a24f, 0x73f1efd5, 0xcfb80cc9, 0x1eae8191,
-	0x731df817, 0xb84fcccc, 0x74c76cce, 0x9c8e6156, 0x68cdfb48, 0x50838fb5,
-	0xfebcc1b5, 0xcb03b33a, 0x4a76f087, 0xac95c1bd, 0x5ed1a75e, 0xbffe691d,
-	0x79f8128b, 0x937bf399, 0x75bd7f84, 0x35a9f9cb, 0x41fa0b90, 0xd167e2be,
-	0xfdc135d3, 0xe09a6971, 0xf60df903, 0x050be630, 0x53de1fd4, 0x64cfafee,
-	0x7ba15672, 0xcdab9e3d, 0x1e02f7da, 0x887f78e7, 0x678287d3, 0xf1fabf05,
-	0xbf29f52a, 0x9fed55ba, 0xdc6dabba, 0x54dfa06b, 0x81bb05fb, 0x3a96aa82,
-	0x6b0fb08c, 0xe1909eda, 0x073ee67c, 0xa2a44b83, 0x83f8eab1, 0x0f166675,
-	0xcdfc67b2, 0x2e4e80f3, 0x2c8135af, 0x1745ae24, 0xdf87c06d, 0x0f7f3833,
-	0xdfde6c71, 0x57d36489, 0x3c0fabf0, 0x597cf2f6, 0xe715370d, 0x4732ab33,
-	0x03da7706, 0x81e4bb95, 0x675a7a2a, 0xe572c78e, 0x074ae0fb, 0xfb420fbe,
-	0x1f7871c3, 0x4fb81137, 0x8ed2d192, 0xa81f6cf7, 0x5874638d, 0x88cbb2d6,
-	0x7bcd54f9, 0xfa3f4a22, 0x50bb34fd, 0x30bcaf1b, 0xe02863af, 0x5814d0a5,
-	0xa7408ce6, 0x7394a393, 0x2729afca, 0xc76e945c, 0x27247ffe, 0xa2722996,
-	0x95e3e303, 0xe7df02f6, 0x3031392a, 0x5a589c92, 0xeb0818e7, 0xfa4774b0,
-	0x4b24d840, 0x149a99df, 0xefbc4e49, 0x47cce761, 0xeef67df9, 0xdc4e54d9,
-	0xb31392a0, 0xf44e90a3, 0xf6513eed, 0x42725f49, 0xcbffb759, 0x907de6fc,
-	0xf7f61113, 0x71393a17, 0xe518bf8f, 0x45b33dc4, 0x4facbdcd, 0x391394fb,
-	0x5e61f749, 0xa044c676, 0x7db9f79f, 0x0bdf9473, 0x5e407e80, 0x11d94664,
-	0xd1b97a6f, 0x53ff5f1b, 0xfffaf97f, 0xbe159e10, 0x3fda94be, 0x7448d4a6,
-	0x979e9048, 0xbaf947de, 0xf8c8f400, 0xb907d2fa, 0x67c7539f, 0x66cf808b,
-	0x6b2cf9aa, 0x7266ed5f, 0xf52da6a1, 0xfcb4b999, 0x09d946fe, 0x30fef2a2,
-	0xf352cddf, 0x5ea8ccdd, 0xe3196ef8, 0x13fd97bb, 0x6dea7f50, 0xfce67f7e,
-	0x11b3f296, 0x31f408ce, 0xe68c6e67, 0x7189dede, 0x06d8c9bf, 0x113de5fb,
-	0xe63f79cf, 0x71c1c07a, 0x7d04c9bf, 0x9e3e49fa, 0x2f3d7c79, 0x3e794878,
-	0x22de5fc5, 0x6d574fa6, 0xd57f1116, 0x57ff6cad, 0x073e0b37, 0xff8c17cd,
-	0x56d79e1b, 0xb5e760ec, 0x39850674, 0x78aff5aa, 0xce1ea3af, 0x08362a09,
-	0xf70cde78, 0xa59f001e, 0xce259f1c, 0x29573c0a, 0xc1fad26d, 0x2f6da21b,
-	0x1e101b90, 0x78abc3fa, 0x105342fd, 0x7f0a1dcf, 0x20373829, 0xabb6d49f,
-	0x59fb711a, 0x9a2a4fb0, 0x0d9ddf75, 0x3704ae78, 0xadaf41d4, 0x7b96d16a,
-	0x8b17bcf8, 0x146d8c81, 0xb33df93e, 0xf778f4f3, 0xf653f1e8, 0x8873f12d,
-	0x9ff327e2, 0xfe259f87, 0xf05e785d, 0xc7a2f175, 0x3f145d47, 0x324f181f,
-	0x6c7e3f61, 0xf17f2170, 0xbbe22bbe, 0x189e8b4e, 0xe50f79a9, 0xef2f1ca7,
-	0x83f5dc19, 0x80b55ea0, 0x6fd74af5, 0xf34497d9, 0x38c85b73, 0x6d286638,
-	0x90e3cad2, 0xa0756ffc, 0xbb5b9f7c, 0xdab88045, 0x60befcc5, 0x7c09ef99,
-	0xe5c1e63f, 0xfad3de54, 0xdc9bc70b, 0x287e5e70, 0x53fc882a, 0x409ddfa1,
-	0xfa6f94bf, 0x0c4e38f9, 0x9ca3e60e, 0xb8ec136a, 0x4c51032f, 0x8275d16e,
-	0x4cf66d77, 0x5f016bfe, 0x6a5fe617, 0x4358eb63, 0x75f60dd7, 0x5be79f81,
-	0x80f83e98, 0xe73b22ff, 0xd992eff4, 0x490238fb, 0x44e77e40, 0x8f915cfb,
-	0x939aee70, 0x1ddf5aa4, 0x37fe8c9d, 0xe0fc4e09, 0x36fbffa3, 0xbacbdbeb,
-	0x7f4cfa2a, 0xd3c157d7, 0x1f3add4e, 0x9c2f6a8a, 0x8272e780, 0xf20bdf13,
-	0xd179e1c7, 0xfef646c9, 0x1fae41cd, 0xd805f7e9, 0x78f7ea1f, 0x21c0c066,
-	0x145a7a2e, 0xbf6295c6, 0x533f4c69, 0x3bfd29f3, 0x6e375f48, 0xa3b486a9,
-	0x7f8e165e, 0x066edf74, 0xd04d3fb9, 0x19d149c4, 0x27ffbee1, 0xbea397c0,
-	0x36493e02, 0xc8797ca3, 0x19eebece, 0x1ef02466, 0x3235e5da, 0x06bdd1d2,
-	0xe06c91c7, 0x04c98f2f, 0x83e5c7f6, 0x3b9d1e37, 0xa445ca00, 0x26f7e28f,
-	0xa56b8354, 0x91aac598, 0x5c9847e2, 0xfffbc13a, 0xaed79513, 0xa097786b,
-	0x7ce27b07, 0xb674bf70, 0x0754d773, 0x0f325bf8, 0xcf7386ad, 0x23f67959,
-	0x1b1d6047, 0xc74fbbd8, 0x9da1e4d7, 0x0577d0f6, 0xe8c767dc, 0xbb9c017a,
-	0x391ea767, 0xe0f7c742, 0xb73c449a, 0xbc4aeb9c, 0xe731ce07, 0x0e9d141e,
-	0x5de16f5a, 0x7f9c0b56, 0x122d1f4e, 0x0f2f0ab7, 0xeff47692, 0xeefdadcc,
-	0xca4fb0dd, 0xf7843ca8, 0x87fcca9c, 0xfc840ea6, 0xd7db017a, 0xb846dd78,
-	0x74ded9e7, 0xfb4998d1, 0x00f5a12f, 0x59eb35dd, 0x028d9abd, 0xe25817be,
-	0x64f9027f, 0x1f0146c9, 0xfaa769c4, 0xf5c199af, 0xbed12981, 0xf9a7b69e,
-	0x700f6852, 0x03ddc637, 0x743593e7, 0x527ed89c, 0x97539e1d, 0x98b476d0,
-	0x2efc6fb4, 0x5eb25bc2, 0xb0af7020, 0xe3ea526c, 0x41de0093, 0x47e509d9,
-	0x08dcfd77, 0xfb479ee3, 0x2fe1441b, 0x42a63b14, 0xc103f27d, 0x152eef8e,
-	0xbafb8b5e, 0x623bef9b, 0x14e2cd1f, 0xefdca204, 0x2af1d493, 0xb869d125,
-	0xd7964a9f, 0x3abcc3d5, 0x06a989bc, 0x468ba7a4, 0x2927e390, 0x7f54ddbe,
-	0x7164613d, 0x27bc7b30, 0xfe2a1d8c, 0x1d3a32b9, 0xcb6a2fdb, 0x98b33e41,
-	0x853c6114, 0x23e98ebb, 0x7ca3ab9d, 0x94eb57e0, 0x7df029ed, 0x7e136acf,
-	0x932af0bf, 0x7586173b, 0xf4fb7fa0, 0xbdc0997a, 0xd3eb95c7, 0x9e3ac1d7,
-	0xe13b2cde, 0x8e7c40dc, 0xbe9411c5, 0x7b64fcca, 0xa7b833d6, 0xcb7f199b,
-	0x02eeee7b, 0x94a5dbe0, 0x7e70994f, 0xe2563e5a, 0xf53e4728, 0x4be3145c,
-	0xe7a57e7a, 0x1b8d6553, 0x65a1cb22, 0xd0e59105, 0x37ee7ad0, 0x6b9f2c8d,
-	0xbbe98588, 0xf078c9e3, 0x0d571663, 0xf404d79b, 0x70bb20fc, 0xf3781ed0,
-	0xdc819fd3, 0x3be2b4ad, 0x7d92d565, 0x83e8c09d, 0xeb9fff00, 0xec29f2df,
-	0x51b9b287, 0x29d90ef8, 0x47d80f58, 0x1cf0136b, 0x8c57c4bb, 0x79e25778,
-	0xf4b49b4b, 0xef21f8ae, 0xa5c48b73, 0x31655f96, 0x77aaa5c4, 0x6e9447f4,
-	0xdbf33f69, 0xcab01f04, 0xdcea3fa3, 0xe62670ff, 0xe5ae38ed, 0x6b583f5c,
-	0xfa3eba45, 0x40d5c5c8, 0x287ef3b7, 0x89dbd010, 0xf20f5dd7, 0x7049bab0,
-	0xf4b89f80, 0x297dac87, 0x3ee30f6d, 0x5f4673fa, 0xb01dce94, 0x3fd7aa0f,
-	0x6feb1fb1, 0xff001c14, 0xd46286e8, 0x22bcca27, 0x9d8df2c1, 0x79504768,
-	0x7b68f185, 0xec1262bc, 0x2655ea83, 0x1562b83b, 0xb3e8527a, 0x40a7bf93,
-	0xb3b1cecc, 0xb4673b68, 0x9eb2f903, 0x4239c52e, 0xfd029e48, 0xbd1978d4,
-	0x3b2abe75, 0x4df48b61, 0xbd1eec9f, 0xd0227f42, 0xfe98665f, 0x33cfacf6,
-	0xf69e3d02, 0x91671809, 0xf40bf407, 0x9fe2b2f9, 0x1eb51621, 0xea7d17d5,
-	0xfd07b0e9, 0xe958cbc1, 0xe854fa61, 0xc7874f51, 0x8c0f7225, 0x51d5a1fb,
-	0xfabc8f38, 0xce59ef37, 0xcf9e19f6, 0x923fd5e5, 0x44bafb04, 0x0a407162,
-	0x1624ab5e, 0x5c63d637, 0x0719d74f, 0xba7c67f5, 0x0e8acc71, 0x20f1edc9,
-	0x4a3ea9b7, 0xdf9fb402, 0xe3117e6c, 0xd2bfcf2b, 0x37ea2779, 0x003a516f,
-	0x92b66ffc, 0x3e21da00, 0xade547e4, 0x1369c622, 0x4b359029, 0x712bbf65,
-	0xb2bf1531, 0xb7cbbe22, 0xb4857c9a, 0x27ebf97d, 0xc25c62c6, 0x7b7fa60a,
-	0x39d8115f, 0x2c63b788, 0x972a3bdc, 0x5e8e7c58, 0x345df82f, 0xdebbc3b3,
-	0x7a03998c, 0xdeccd09b, 0xb96f2c17, 0xfca93657, 0x65a2fbbb, 0x939e1ea5,
-	0xc33ae979, 0x3e300afb, 0x4a76fbf5, 0xcbd74e5c, 0xdbcafe8c, 0xcae7d464,
-	0x805cb79b, 0x63f2cd78, 0x6b77b426, 0xc11a2f9a, 0xd5fbcd9e, 0xc41decab,
-	0xa7135136, 0xae3e23d7, 0x20980c59, 0x0ab5abae, 0xbe6871cf, 0x3c2df313,
-	0xc66bed1e, 0x6afc556f, 0x8a5eebc7, 0xbf6d8ac2, 0x857be1b4, 0x786c9bed,
-	0xabf9aa5f, 0xc47b55e3, 0xf034b5c3, 0x4e3bb878, 0x918fe413, 0xc1cee1e3,
-	0x7d21283f, 0x878dad16, 0xbf8ccd23, 0x456671d1, 0xa4350f7a, 0xe9fabd77,
-	0xddcf10f3, 0xe793f5b5, 0x5f95dc61, 0xe21e7e5c, 0x6882a86c, 0xe6a53d07,
-	0xfe31f795, 0x1f176955, 0x97a0edc3, 0xc3f1897f, 0x7268fe17, 0x3b0bb402,
-	0xfe80a74e, 0xdfcb6171, 0x782e2092, 0xe8a98ed9, 0x3db659df, 0xedbddf0f,
-	0xfa059ecd, 0x7e23f5f5, 0x7b6ebf59, 0x3c60f75a, 0xeeba79d0, 0x714227c0,
-	0x2c552d8e, 0xe3c1d47e, 0x8e47371b, 0xcf11ef17, 0xaeeb3ad8, 0x5b1fc029,
-	0x67d09e99, 0xba61e35c, 0x63f4379e, 0xf8f3371d, 0xbe3b96d5, 0x3cf1ae32,
-	0xd7ae83fc, 0x7c6d18b8, 0x8bada7e8, 0x942cf17f, 0x1af426b5, 0x07e818d7,
-	0xf47894fe, 0xd95da3cf, 0xdeb08931, 0xa4f181ff, 0x0e857eb0, 0xa69fd7e0,
-	0x8cf8bf80, 0x44bf441c, 0xef098770, 0x38ef966b, 0xc2e9fb8a, 0xef1843f6,
-	0xf85c784d, 0xb1fa1205, 0x03ee5df8, 0x6568d9aa, 0x1d7c90f1, 0x61d25e20,
-	0x2e3cefc3, 0x12b5d192, 0x9c5bd92f, 0x3498b2e4, 0x8b0b3efe, 0xf8daace7,
-	0x0c3f8f01, 0x09309baf, 0x2bf3abd6, 0x3c1550e3, 0x130f01d8, 0x91c071d5,
-	0x714352e3, 0x8375bac0, 0x1e3e04f5, 0xf9a5f38a, 0xe9ef10a1, 0x8a468e13,
-	0x81b0bf2b, 0x905f0fc5, 0x568fdf23, 0x626b82e2, 0xd7d6fb74, 0xbee078bf,
-	0xf175f1e6, 0xa1c63f34, 0x5f051ba1, 0xf323575d, 0x846327f7, 0x85b7646f,
-	0x0a549bee, 0x4f2cfbfa, 0x997dc0c4, 0xbe234ed6, 0x55d8a293, 0xdc5dbe7c,
-	0x8af5d6df, 0xf5a27188, 0xbf907b2d, 0x3547f9eb, 0x8fd1473f, 0x6f1f2377,
-	0x1f931b75, 0x3ead5b5d, 0xb5d3850b, 0xeba44dfb, 0x189dcdea, 0x79bfbaa7,
-	0x7543b19b, 0xc3f20cfe, 0xd77f1aa7, 0x22c6bb6b, 0xa2efe73f, 0xcad9fbe9,
-	0x3f8d63f9, 0x9b353f72, 0xa9fa6a2f, 0xed18b6f0, 0x3bfbbe96, 0x05eeb927,
-	0x99dae778, 0x45ae751e, 0xd08be69c, 0x6462cfff, 0x3237576e, 0xa395383f,
-	0x959c3ef8, 0xda2707bd, 0x5b2f51a2, 0x0c749d66, 0x665d21de, 0xcc5c6235,
-	0x471e3aca, 0x326723f3, 0xeb4af7ac, 0xbbc604ed, 0xb2abf01a, 0x9bbb65ef,
-	0x27273e80, 0xcfaa6517, 0x1bf19461, 0x4f881807, 0xd3ad8fbd, 0x4a7d8206,
-	0x1850ef24, 0x7f699dc7, 0xb62e4095, 0x9f7f987b, 0x02313d5c, 0xf64bb7be,
-	0x6e14097d, 0x04e0be7b, 0xba4f6cd7, 0x7e43f067, 0x1df69706, 0x4753bc5d,
-	0x69c977e7, 0x6ad13d40, 0x1569d808, 0x4f6a8d62, 0x41d70346, 0x5e12521c,
-	0x8978c0a5, 0x11e63cc7, 0x46d43f70, 0xf50adaa8, 0x5de6929c, 0x9249d895,
-	0x72159dee, 0x57a50478, 0xc557a70b, 0xff65675f, 0xf03b70a6, 0x0cb896fd,
-	0xbbe40752, 0x7d46ead6, 0x0b9b29e2, 0xdfd23fef, 0x88938868, 0xf54ed127,
-	0x5fb450bb, 0xda3b7dcd, 0xe71f26af, 0xa613e6d2, 0xc9232749, 0x8e3e049b,
-	0x7882d102, 0xe06a9b88, 0x70abb2fa, 0xdc785264, 0x19c48971, 0x2c3bf280,
-	0x6e808f78, 0x1e7aaf2f, 0xdc768b16, 0x3e1a7c74, 0xe1d19b11, 0x6a71b035,
-	0x0389dbbe, 0xe3a747df, 0xaf1bae3d, 0x70b56f26, 0x0911277e, 0xdcc59df8,
-	0x2ffe384e, 0x4abdf069, 0x224f8a2a, 0x38c2644c, 0xde2130e9, 0x83cf9625,
-	0x6fa9aff6, 0xeb01ef07, 0x0c870b5f, 0xb5efabb5, 0xe0e5c0de, 0x8a514b11,
-	0xac93ee85, 0xb818b5e1, 0xb82c9d9d, 0x65a04e4e, 0x9fc801fe, 0x61e796d2,
-	0xc8d08a5c, 0x5ac46ae8, 0x4466fb82, 0xad55c790, 0xd53d468a, 0xa8de2664,
-	0x8e3f70f1, 0xd0f1e578, 0x3f9f8f8b, 0x28185639, 0xa50d6928, 0x1fceda35,
-	0xa62c35cc, 0x4502d08b, 0x8b10fe14, 0x5ff40c6b, 0x6c9dc33f, 0x1bd30718,
-	0x2877bf56, 0xc16bdaee, 0x1ba86863, 0x14c0ffba, 0x2ef82164, 0xdd0ef108,
-	0x51b8720f, 0x0ec653c9, 0x463406ef, 0x332ef287, 0x698df7e5, 0xdaf37f2c,
-	0x7ef0f5a1, 0xe8bda74d, 0xc78c0b66, 0xcf0ebf6c, 0x9af102c3, 0x937bd5f7,
-	0x4738ca2f, 0xc1e40c6f, 0x07b7c7fb, 0x23c5fbd9, 0xfc7ba1ad, 0x59378f28,
-	0xed007c94, 0x43d6a28b, 0x5aaad7c8, 0x01b9610e, 0x9e1d34f2, 0x421bc810,
-	0x65bf79e7, 0xb5f2414c, 0x716b5e14, 0xb1c13c32, 0xbf6632d0, 0xb8c3c1a4,
-	0x61d9bdfa, 0x6e2b483c, 0x86e1e1d0, 0x858785af, 0x87a86f6b, 0x3bfa55f7,
-	0x0b174a6f, 0x73d35f00, 0xdb8ef80c, 0xf41663c4, 0x145fd0bf, 0x670e23ca,
-	0xbcf72f43, 0xc2853b15, 0x97d35729, 0xaba14ed2, 0x9d26e8de, 0xef63afd8,
-	0xe7e96a83, 0x87ae2ddf, 0x8b32de00, 0x8896dd2b, 0x0577c7f3, 0x8b8bbba6,
-	0x74c213f2, 0x09ee2c4d, 0x11feaef0, 0x5a1f82cb, 0xe9dafe54, 0x34c54b39,
-	0x011fde3a, 0x3c31b823, 0xdee5c49f, 0x9e7451a8, 0xc6032e89, 0xb8b11fd5,
-	0xdb3b4057, 0x6200609c, 0xf71226cb, 0xf70c4104, 0xfa8feca3, 0xaf8ecc1d,
-	0x56f8362f, 0xfc60f3b0, 0xfa611dbb, 0x47d1d0e8, 0x5b47d190, 0xb547d227,
-	0x47d193bf, 0x346e5d5b, 0x3b03573f, 0xc70491ba, 0x5937bac1, 0x61a40b0a,
-	0x82626e94, 0xb23740f5, 0xc282b6f7, 0x3aebc428, 0xf58f5f18, 0xe652e3e1,
-	0x36fadbd5, 0x71fb481e, 0x0799d806, 0xa61e780d, 0xb7a94de0, 0x46e2c2c3,
-	0x7ee6cdff, 0x99a9fa11, 0x961fb1d4, 0x3f81eb6f, 0xed875c60, 0xd05dcce0,
-	0xae9b36de, 0x6fdc2390, 0xf815c1e3, 0x7f23784e, 0x04963bd7, 0x7bd720bd,
-	0x3fdb07c7, 0xde807c21, 0xe8f80193, 0x0af2fdc4, 0xdd9667bf, 0xce40b826,
-	0xef618f0f, 0x616ebc90, 0x16bbf576, 0xaf4ca791, 0x5bb83c49, 0x7b2bfb04,
-	0x27eb0195, 0x9ea19a42, 0x5f5e2aff, 0x95ddf8d2, 0x89e85575, 0x7818d272,
-	0x78f9e4cf, 0xfd2d1ef7, 0xa9a4c7c4, 0x1eed29e0, 0x45a290f7, 0xee265094,
-	0xc810f05d, 0x3e3f4a55, 0x7231bb4d, 0x442de014, 0x233e943f, 0x776d0fad,
-	0x7c6bad88, 0x5b0be80c, 0xf1152ef6, 0xae7e8e5d, 0x47bc166b, 0xc567eb49,
-	0xb4adda90, 0x4d2c567d, 0xf3c09f21, 0x087e7903, 0x743fd34b, 0x7dfa041a,
-	0x9ecbf703, 0x922578e5, 0x6399bafd, 0xb8f4cf20, 0x9418e4ec, 0x85beca0b,
-	0x5ce05467, 0xdbe7e25b, 0x0334c169, 0x8fb29bac, 0x6021a0a5, 0x4d2b42a5,
-	0xce201872, 0xbb8f5de1, 0x7b0bce08, 0x5fb73be3, 0xea81eecb, 0xc7ce7fbf,
-	0xebf58df3, 0x2fb8f4bf, 0xb7e039fe, 0xf8f1dcca, 0xbeaf9a4c, 0x69fa32f6,
-	0xdf54c457, 0x68ef55fc, 0xeeffc7e8, 0x00c4dfd5, 0x333ffa1d, 0x353fbc45,
-	0xf1e8cace, 0xb60e6780, 0x04efe2cb, 0x1c4a8192, 0x15ce2ab2, 0x865eb8ca,
-	0xdf86994b, 0x05bacf51, 0xa7ac2059, 0xf6878a57, 0xae78a931, 0xae2eab78,
-	0xbb2f3955, 0x80fcc025, 0x42beb159, 0x74faefec, 0x3e49f7f6, 0x9992fa63,
-	0xa1ce0ffe, 0x3373f2a6, 0x5efb31d7, 0x09598710, 0x3f08f98d, 0x5afd1536,
-	0xfefb4439, 0xaf40d641, 0xf4f28064, 0x67978454, 0x13a795d6, 0x6b915bf4,
-	0x4df9c3ae, 0x0cfd2a25, 0x13a346e5, 0xd1f4f1f8, 0xf7f9fe94, 0xe1bff4cb,
-	0x867f3226, 0xcdb8ceca, 0xbe515f71, 0xc4696f46, 0xfb7e8577, 0x523f38b9,
-	0x2163c5fc, 0x4115173c, 0x8f1e803c, 0x95610eb9, 0xdf13d1d5, 0xf1e9fc7a,
-	0x8f51e0ad, 0x9d0f9cb7, 0x9e8ef1f9, 0x23e3d1f8, 0x5be97e7c, 0x7530eb0b,
-	0x4bf288b4, 0xfc4f7bc1, 0xedfaf5b0, 0x009eb4b5, 0x0df142f4, 0x30174cf8,
-	0x862b27be, 0x3a6c4fd3, 0x140b37e2, 0x0f4801c0, 0x55e3d798, 0x04acc78f,
-	0xd5813ede, 0x1af80fdf, 0xed00fc89, 0xb2dd6521, 0xc6f76bd2, 0xe8c4de41,
-	0xa7abd14c, 0xbd50bc72, 0xbce6f51a, 0x9bfa2b44, 0x9a9eaf40, 0x5e5bc614,
-	0xde571b15, 0x600bcb48, 0xfc0afe9f, 0x0608b1d1, 0x95bcc5df, 0x56e05ff0,
-	0xe2ca5f3c, 0xb7df0559, 0x93d5a67e, 0xce0bfaa7, 0xdc3dfe82, 0x05655ee4,
-	0x87108c7f, 0xff1479e7, 0xd7f875c7, 0xf36bb3b6, 0x0afc7c7a, 0x27b931fe,
-	0xab7a14de, 0x7cfd72b3, 0xfa0a1930, 0x3337d8f2, 0x137f8163, 0xbf447c7f,
-	0x4563c4c4, 0x6e9c3821, 0xe2059e91, 0xa7b77d0e, 0x763e0b7f, 0x15494a90,
-	0x7253bb1f, 0xd8deb3af, 0xeb298f93, 0xc7af8535, 0x05dde214, 0x4429a67e,
-	0x1ec84bfa, 0xffcf0d48, 0xb3f72b79, 0x6043210d, 0x1c585f9e, 0x79f3ff8c,
-	0xd54de686, 0x9b3fe84b, 0xb66d9ff7, 0x121bfde0, 0x7842ba94, 0x93f7c34e,
-	0xf0f8c6bc, 0xbd656438, 0xd3096a53, 0xfbe2e6e7, 0xe42f14d9, 0x38f098cb,
-	0x090559b6, 0xe3e20fdf, 0xf66cdf38, 0xd3db9c42, 0x2b0dfb92, 0x83843df8,
-	0x527e7163, 0x3fc81460, 0xb6e5f97d, 0x4e50d5bd, 0x3d6095eb, 0x910afe3e,
-	0x3b821ff9, 0x5217be4c, 0xe953d77b, 0xa13946f6, 0xdc3671d0, 0xe801bd7b,
-	0xb8c2283e, 0x655cfcfd, 0xcf7645e7, 0xabec45c1, 0xf6f0a7ae, 0x02f7625d,
-	0x81db28f2, 0xedfa7a7a, 0x49f34e8b, 0xd3b41e70, 0xcf22abd3, 0x5bfdf81b,
-	0x68bb3f45, 0xeb0fbf75, 0xe3efc0de, 0xba8e2ffa, 0x1be7d60e, 0x2d61d5d3,
-	0x44f4295d, 0xf438ebe9, 0xf1f99dd3, 0xdfcb503a, 0x049cbccb, 0xe3d151f2,
-	0xeb8afac3, 0x9bd7a863, 0xe6dc3f3e, 0x857eb2ee, 0x35e8af3e, 0x6423d97d,
-	0xd34644af, 0xebe3ce71, 0x2edcd733, 0x41c68bb3, 0x886fd38c, 0x73cbde56,
-	0x393e8344, 0x95ed21af, 0xac573866, 0x07f97e63, 0x3d8d656b, 0xbedb86ec,
-	0x67bd9ed8, 0xb6b97f3b, 0xef8a23fc, 0xcef8f141, 0x868ed6ad, 0x7e1491fd,
-	0xbf67b7cf, 0xc9c82f06, 0x31a32379, 0xafdf4e7e, 0x7efa7e7e, 0x7035fdf5,
-	0xd8c1aafb, 0xd2a9da38, 0x1636ec4f, 0xcd697d47, 0x14f0cd93, 0x73f86f5e,
-	0xd4b8879b, 0xa3ae6f7f, 0xa44e7a21, 0x781468f7, 0xc2e7be0a, 0x0fe098cb,
-	0x1eff95a8, 0x6cdd9de9, 0xf413f337, 0x6088efd6, 0x8683ea3e, 0xe82203a7,
-	0x048223f5, 0xa0ecf0f5, 0x6350b0cb, 0xb97b300f, 0xef003d87, 0x657cd0a4,
-	0x0f662eeb, 0x5da1d4b4, 0x0aed4951, 0xe01b3b90, 0x7cc1901d, 0x27681940,
-	0x885eec84, 0x7786caaf, 0x0c5db932, 0x37a5a74f, 0x1f33fab2, 0x8c35374f,
-	0x9dd5bb00, 0xce932f0c, 0xa8fb5db4, 0xf557da99, 0x508a24a9, 0x76c8aafb,
-	0x4ed677ed, 0xde3bdca2, 0xa4bbc025, 0x65a8ff34, 0xecedff72, 0x8fd1b699,
-	0xda81bf82, 0x54d9b767, 0xfb6f6f76, 0x039b66e3, 0xfedbd9f1, 0xcd17b4e8,
-	0xdf8a3804, 0xe421f282, 0xbe28fe07, 0xf442a3ff, 0x53780b17, 0xe5f6e5e8,
-	0x88ced10b, 0x0a6ae6ba, 0x736593c4, 0xb8db703a, 0xc186365f, 0x706189a9,
-	0x376e4a26, 0xfbbdd3f4, 0x3bf028ea, 0x04fa3bbf, 0x2b7e79da, 0xf41fdbf3,
-	0xe3a91594, 0x026d6bdb, 0x10c097a7, 0xdc777fd8, 0xec0127b8, 0xc0596c95,
-	0xb2fd4ef7, 0x99f1e9ef, 0xdb669fc0, 0x6629d257, 0xfde2364f, 0x60547f32,
-	0x3d2ac3c8, 0x4ddfcfce, 0x3fdc5ff5, 0xdcff1d44, 0xb5abcd6e, 0xc022f831,
-	0x7bdccecf, 0xde80f40c, 0xae584ee4, 0x2b9004b8, 0x24a1eae4, 0xdd6a5f3c,
-	0x689f0367, 0xe0e77f17, 0xa49eeb7c, 0xdaad3405, 0xb0369ff2, 0x3e38eae3,
-	0xf8ed4bce, 0x76e5535e, 0xa113df11, 0x003d26fd, 0x85d6eb7e, 0x1fdeec59,
-	0xc8a6afbb, 0xef9ff1d5, 0x9cc45219, 0x4cff7889, 0x98a737d1, 0x9f183ebd,
-	0x1dfd8ebf, 0xf7ba29cc, 0xefe56ec9, 0xcff5e993, 0xe2b26c67, 0xa9f8c32f,
-	0x4fd67665, 0xfb2bfb6f, 0x53e204b3, 0x296cbfed, 0xb3f8c220, 0xefc24b3f,
-	0x3da40fe7, 0x3df60855, 0x01239d91, 0xa2f644ac, 0xa7cfcb7e, 0xbc2f6fe8,
-	0x6793be7b, 0x3cbd6ede, 0x6e2466eb, 0xd004d72a, 0x9803dcc7, 0x07c991d3,
-	0xf5bbff45, 0x55dfad33, 0x722b07af, 0x6e3fd732, 0x780210d5, 0xfbc2cc77,
-	0x8c240713, 0xc9ebd2f7, 0xbd058353, 0x204fc3e8, 0x4d6d6d7d, 0xfe7b018f,
-	0x009f60df, 0xc65eb6dd, 0x49aa83f7, 0xc7781ee0, 0xb455baa9, 0x24fc6007,
-	0x67d87af3, 0xe0a13e8a, 0x1eeaeda5, 0x7fda58f3, 0x7d8345f6, 0x76f10505,
-	0x57682ff0, 0xc1fdf84f, 0xfe679004, 0x07e784a0, 0xc6f717d9, 0x45f1542c,
-	0x7e0355ff, 0x6eeafb7f, 0xfc60f7ed, 0x8b6ed0f5, 0x7bcbd981, 0x063dfff7,
-	0x57dbd4f8, 0x90bc212f, 0x6f53d13e, 0xcf3bfd46, 0xd1fc862a, 0x8899bd6a,
-	0xde2187d9, 0x152c6a6b, 0xfaef426b, 0x6487ce70, 0xd4f49595, 0x2778422b,
-	0xd0f0092e, 0xf0561f43, 0x3e33d3ac, 0x773d71b2, 0xef0f1918, 0x4d5db65e,
-	0xc77bc0a8, 0x0afb18fe, 0x8f4ccf94, 0xee7bdeea, 0xfdf0e9c9, 0x9ddec8a0,
-	0x7ee22ab8, 0x62b3bdda, 0xdf6a8778, 0xeb8a4e52, 0xc5d06576, 0xfad16f0b,
-	0x3345f657, 0xbce4baff, 0x224f7d5e, 0xf1c7df5c, 0xcecc1815, 0xe183bce9,
-	0xac6fa8bd, 0xb0f574cf, 0x4361fff7, 0x0058393d, 0xfad462e2, 0xffac234e,
-	0x3e8ad9bf, 0x25a5fc67, 0x978bf806, 0xb4210ee4, 0x9268b2df, 0xac15740b,
-	0x33b07623, 0x18301fb6, 0x37325d60, 0xcf5c62a5, 0x731cfc2b, 0x31a34b49,
-	0x4b174555, 0x19d839f8, 0xaf129bd9, 0x9632befa, 0xfb3397f1, 0x71817fca,
-	0x91347f1d, 0xd0f41191, 0xfe4cb185, 0xa77a336e, 0xc77a866f, 0x68df780d,
-	0xef5ffeef, 0x97937787, 0x038c731c, 0x5894e0bf, 0x0eda0fb6, 0x710f52be,
-	0x821f6dc1, 0x6672a2d4, 0xa068b163, 0x1c45befd, 0x9877afcc, 0x90d6bdfd,
-	0x12b8943f, 0xc5379e60, 0xd6fdbe32, 0xdce68301, 0xbefe2dec, 0x8cb1f5ef,
-	0x32c6a50f, 0x03d6dabf, 0x700b09b9, 0xc447b9ff, 0x64f01f82, 0x456c3d47,
-	0xe8a80fc5, 0x6f0f936f, 0xfe863e9d, 0xc1977273, 0x38edcb0e, 0xf30882fc,
-	0x24219c75, 0xf43d204e, 0xac6f0a39, 0x5d5bde1a, 0xc71d1e0c, 0x0aafd86e,
-	0xfe04a9fe, 0xbfcd0671, 0x43c52ed5, 0x7f82983c, 0xff4a1e65, 0xdae2168e,
-	0xe4adc160, 0xfe15fada, 0x31efe568, 0xe513b04c, 0x5d2033ef, 0x6eb9b76e,
-	0x6f72c589, 0xeccfe40a, 0x36d27a63, 0x72494f2e, 0x9fc070f1, 0x79f34eb2,
-	0xb7a78caa, 0xe3e7effe, 0x4bafd254, 0x0ec8afd7, 0x76cdd22f, 0xf0ee4f16,
-	0x10e9cc06, 0x8e96d677, 0x154a9f7f, 0x8e3f7b97, 0xfdf68cff, 0x830eb6c2,
-	0x558fee01, 0x50e210ef, 0xbea7eddd, 0xa933a21d, 0xedafe905, 0x5c7dc118,
-	0xe65dfcde, 0x9f72a48f, 0xe786ebbf, 0xf87fb0eb, 0x8120fb39, 0x1bfd93a6,
-	0xfc410e56, 0xafb06c06, 0xfba278c2, 0x46dad206, 0x92ebd023, 0xe52d2c65,
-	0x9a4bd5e7, 0x4b3fb8dc, 0xc478b3d6, 0x4ca9b165, 0x257a733e, 0xf8c1e886,
-	0x7b4dbade, 0x5c1ff08f, 0x7d6d9e7e, 0x4bf40f6a, 0x80fbebe9, 0x9eda9b8f,
-	0x55c30758, 0x46ecf5e8, 0x4594e119, 0x3df3cf6b, 0xb8cfccb1, 0xf7a330fd,
-	0x5ce51bc9, 0xb26c4f78, 0xbfc1d897, 0x4dc6d6fd, 0xb7eff022, 0xd9539e80,
-	0x7b79073e, 0x3163df66, 0xd6f907df, 0x47e02069, 0x652466df, 0x62fb545b,
-	0x343786ef, 0xb9bcb7fb, 0xebfa3a6e, 0xe005e23b, 0x55becaf3, 0xe8cdbef0,
-	0xfff70dbc, 0x9ffdba9d, 0xc2b7dacf, 0x4f7ad0ba, 0xd4fffdf1, 0xe9ffba34,
-	0x718db8a7, 0x66d9c002, 0xdccefc8c, 0xfe90df4b, 0xa3b57c42, 0x297d5f07,
-	0x6c1ff996, 0xeaffb4e9, 0xffa12e3b, 0x4e3e3421, 0x2be54f37, 0x002a9374,
-	0x0ae91bfe, 0x517c008e, 0x533d02bc, 0xccfe7a3d, 0x0795dc0c, 0xe1ff3c24,
-	0x2e3c4be7, 0x6a947704, 0x99f986bf, 0x6fdd6fb2, 0xf2b238c0, 0x9e82576b,
-	0x45e8509f, 0xb82b3cfa, 0x7953c787, 0x71f61676, 0x8eb07e04, 0xec8ae3e3,
-	0xff7debee, 0x65cf40c1, 0xf98462d4, 0x1d82f590, 0x772945d6, 0xbdef67ac,
-	0x94f0e61e, 0x2dbf87ef, 0xde3d83be, 0xf0cc3d21, 0x5c42341d, 0x931f28eb,
-	0xc5c84463, 0xb70c40fd, 0xb67d860f, 0xfbafca84, 0xacebf255, 0xaa7488dc,
-	0xce23e1e0, 0xb1c4aeb7, 0xc7ce3f79, 0x5d1f07e9, 0x82ff0aa2, 0x3f6c0924,
-	0xe7db028b, 0xbb3fc022, 0x90dba6ef, 0x4c88efde, 0xb7b076ef, 0x47efe1e2,
-	0x8cfa406d, 0x7bc7669b, 0xce494f2f, 0x7e8d38a8, 0xef74c3e4, 0xced067a6,
-	0xfd85fa03, 0x97fd1bde, 0x0893fd01, 0x74a3ef74, 0x853f5aaf, 0xfc5d280e,
-	0x7ca5f01d, 0x7285d3d7, 0x65e0a90e, 0x731cee9b, 0xe9e19daa, 0x8d5200ff,
-	0x8000b56e, 0x00008000, 0x00088b1f, 0x00000000, 0x7dbdff00, 0xd5547c09,
-	0xf37df8d5, 0x3332c966, 0xb2764c99, 0xa00c4930, 0x80490e2c, 0x084ed8b0,
-	0xc3884a20, 0x93a0d752, 0x364b0900, 0x94569510, 0x8b062081, 0xb62d1518,
-	0xef858320, 0x106d1b43, 0x268358a8, 0x622d1110, 0xa57fb1dc, 0x41459041,
-	0xed1fa822, 0xe73bf587, 0x33337bdc, 0x6a02266f, 0xefc7e1ff, 0xdf77dee6,
-	0xcf7ece5d, 0x6ec5f739, 0x843631d3, 0xae630731, 0x7d8c01e6, 0xf4bf3f8f,
-	0xa12d8c97, 0xcf3773e7, 0x8224715e, 0xf0f7cfd1, 0x5e79babf, 0xc776bd50,
-	0xe91c57af, 0xc5cfafe7, 0xffe0525f, 0x8967a671, 0x47f1558c, 0x89ef4cac,
-	0xfbc025b5, 0x6cd69d11, 0xe266b498, 0x03846319, 0x8319789f, 0x1c636ff6,
-	0x6faa3e54, 0x1f2bd3de, 0xe9cc31ca, 0x9b39a685, 0x998f1533, 0x1b3605b1,
-	0x27f967ad, 0xb0dd93d3, 0xc6c646de, 0xc59bbae3, 0xd9dd727c, 0x99c68536,
-	0x8f7329e0, 0x66678389, 0xa07b9e4f, 0x6607f9ff, 0x886d964f, 0x70a13ebf,
-	0x4018eabe, 0x7ec48c4b, 0x0c985563, 0xc9bf9fe6, 0x326533e4, 0xc49f05b6,
-	0xa3db2ac3, 0xfd329b7c, 0xccf4d9ef, 0x9633b7a5, 0x75a4cb6b, 0xb15aeac1,
-	0x646858ee, 0xdfbcc197, 0x9bb59666, 0x1dd5d1e1, 0xb081e2de, 0xef462d8f,
-	0x389989d4, 0x1c1af398, 0x9d629aff, 0x6a5801ed, 0x38a6cbac, 0x6992d007,
-	0xcf8fb65e, 0xeced9793, 0xeea1b2cf, 0x2db9e670, 0xf8128d8c, 0xc930ad62,
-	0x421c3f70, 0xd9e1c6f1, 0x20175e13, 0x1750867c, 0xd5e27e7a, 0x667d1ba8,
-	0x0144f3ff, 0x78632fbf, 0xd3c1adf9, 0x1d0e66db, 0x553e6027, 0xcacc6649,
-	0x5c554b3c, 0xdb6628ff, 0x773ff0e4, 0x1c2e628c, 0x57189a7f, 0x8ffacbb6,
-	0x10aeafa6, 0x78869afa, 0x22e88ead, 0xd053eaba, 0xbcc07469, 0x8bdd194c,
-	0xee98fac1, 0x80ac5eda, 0xbd71eaba, 0x29554800, 0xf6c7ebe0, 0xd7338d84,
-	0x01d99e23, 0x0cc9cb13, 0xcdb567dd, 0xd1b6e1c0, 0xe866fa30, 0xb865e097,
-	0x838bc003, 0xde3585e3, 0xdc6bf88a, 0xd7886268, 0xdc39636f, 0x68d953ac,
-	0x42b7f403, 0xc6f7247f, 0x57039ea9, 0xd931bd41, 0x9e6050e8, 0xc22e8613,
-	0xa0ab89fb, 0xadc3e88d, 0xbc4fbe20, 0xdf9ae23a, 0xa277bb40, 0x8bc0e58e,
-	0x05b08d5b, 0xa7bfc3a4, 0x482936f9, 0x27c42da7, 0xc1b2c7f3, 0xbede7826,
-	0xd5d11869, 0x052ce2ac, 0xe6ce76e9, 0xdb9f0558, 0x2a74d8c7, 0xd863eff3,
-	0x13e89542, 0x16dea0f8, 0xde618f80, 0xd5e1153a, 0x6c93ce3b, 0x11ec6588,
-	0x23e335db, 0x32ce81d2, 0xcc1b2459, 0x5f5043d8, 0xb46b7009, 0x4b1614bb,
-	0x0a7306f5, 0x236321f1, 0x0cadae08, 0xd518d4f0, 0x6045775d, 0x7f5e2cff,
-	0x86eaf1a4, 0x9ec63486, 0x22357189, 0xbb303e9e, 0x87f9c11f, 0x44a9d526,
-	0x7fae82e7, 0x127ece80, 0x2c2ed4bd, 0xe0f38762, 0x0e660ef7, 0x47901ba4,
-	0xf8066eb7, 0x9b3de895, 0xbd355d70, 0xc38e3e8e, 0x657cb6d5, 0x7ba184f4,
-	0x21788eb9, 0x8cc7d817, 0xaeef11f0, 0x7ecdcb53, 0x66c5b3b9, 0x52ed4c17,
-	0xfcfc5b26, 0x79eb7286, 0x593b9733, 0x98229a50, 0x7ec762d7, 0xac23a23e,
-	0xe5fae4c7, 0xdd62cad1, 0x3e185f78, 0xeb890d7e, 0xaccf9467, 0xf2ff7fe5,
-	0x1fd0a19b, 0x9f89577f, 0xc4fce35e, 0xc5a3f5e5, 0x3c22269f, 0xbdf09390,
-	0xeb1cc5db, 0xeadf3a97, 0x5fb9748b, 0x3ea09b65, 0x2af464d8, 0xe66db831,
-	0xf18a25b0, 0x945b0d90, 0xa820cb56, 0x2e614bff, 0x7fe9c3c0, 0xbfae54a9,
-	0x133e3dd7, 0xa1d9afde, 0x7e852e73, 0xf10a2d35, 0xf337b383, 0x371d0045,
-	0x31075947, 0xb770af18, 0xf68065d9, 0xc9044ad3, 0xd7009c65, 0x2feb9061,
-	0x8268cae8, 0xc02df5e7, 0x5d3d507f, 0xf5c6a808, 0x6c319dea, 0x83be1f80,
-	0x1fb47cde, 0x1bda00ec, 0x4f67c89d, 0x9ff1f245, 0x81f0cc8a, 0xbe528310,
-	0x4a0188e7, 0x6e825961, 0x62c67af4, 0x78504f00, 0x30b51cb1, 0x3c07a5db,
-	0x35e67a2b, 0x7546be00, 0x9f08aab5, 0x8e872eac, 0xe9f3fd99, 0x3bed18bb,
-	0x39d0ef4b, 0xd6d5f403, 0x7aabcfbd, 0x31d0eb80, 0x942af58d, 0x6f9e3189,
-	0x4623de10, 0x7b63d5d5, 0xf557b15c, 0xa57cff40, 0xe905b76e, 0x44e61aec,
-	0x24f92ab9, 0xc1b593ae, 0x81ec5972, 0xda15974e, 0xb5771c47, 0xc7fd800d,
-	0xe38299b8, 0x7c0dfd49, 0x0e9162c6, 0x44ca5de3, 0x3fe86718, 0x8e47c118,
-	0x68ef75b3, 0xbe3ef905, 0x18e28c63, 0x6be74a10, 0x38b7e398, 0xce9f77ae,
-	0x3475f889, 0x9406d733, 0x62ba7f13, 0xf64bc20c, 0xf5cb1def, 0xa78f48ca,
-	0xee154408, 0x1de70627, 0xb76fa37e, 0x6c33d601, 0xd1b77796, 0xd99fb011,
-	0xed4bc68c, 0x523ed2f4, 0xb10a780e, 0xd2c6b6cc, 0xb78e2338, 0x7e800db6,
-	0x1fb07549, 0x78ef4f68, 0xa6b8414f, 0x882875d7, 0x777badcf, 0x3ad37ad1,
-	0xf82979da, 0x176179eb, 0x5603db74, 0xdb23ed1d, 0xf2cdf5ca, 0x666f5c53,
-	0xadb27ac7, 0x2c7dfe09, 0xd724f42f, 0xf66bf8c1, 0x17ef7566, 0x2895eee5,
-	0x52e403e4, 0xc691ac6e, 0xe9eacbb9, 0xbdabfb8f, 0xd20f73b1, 0xdf7bf3e0,
-	0xb47f12b1, 0x137e13c4, 0xf84a7df7, 0xba485c48, 0x37d9ad98, 0xb179415f,
-	0xa67014a6, 0xca59c284, 0x7eb8358d, 0xf45b1fa2, 0x27cfa024, 0xd8829eed,
-	0xcca57b40, 0x20159d1e, 0x8f7be497, 0x19ee662f, 0xed6190b0, 0x16595be5,
-	0xb17ef7c9, 0xc27df201, 0x9122fbc0, 0x2e2c9a9e, 0x569fb617, 0xcf388dd8,
-	0xfb425833, 0x975e0633, 0xe0407af0, 0x52763b33, 0x870875b6, 0xf8e80d93,
-	0x4fde4899, 0x8dee8f2b, 0x83bb09d5, 0xe0eb0bd3, 0x08fb82f4, 0xc666bfb4,
-	0x748c3c72, 0x9cf48a79, 0xfee2a64e, 0x76f81786, 0x1b0edd23, 0xf48dddef,
-	0x9d04ce9f, 0xa274e78c, 0x63dbf7a5, 0x711d7cb9, 0xdc218bbc, 0x0ee615f3,
-	0xc654ef67, 0xbe29bb72, 0x0fd13463, 0xce1943f0, 0x4eb53437, 0x66dca035,
-	0x7fa809b6, 0xa0eb137e, 0xae05797e, 0x366f48dd, 0x79f89b97, 0xe9c6d9be,
-	0x07d39326, 0x1c273fbc, 0x3e436d3f, 0xa3e7e01a, 0x7347a478, 0x26de3d28,
-	0x011bf4e0, 0x3df1d0df, 0xf1f8e177, 0x02973a1d, 0x603b0c83, 0x3ae831f6,
-	0x49e8016c, 0xf40653e4, 0xcfb40b0f, 0x9f2215b2, 0x153956a5, 0xb302ebc4,
-	0xd7dc1efb, 0xf98d9472, 0x5f3acf48, 0x6c97bc3d, 0x7efe1173, 0x67689eb4,
-	0x90686c11, 0x2c40f59d, 0x9557e3b7, 0xfa7ebca1, 0x53ca235b, 0xbdbfe487,
-	0x01e5d1b9, 0x50c7f1f4, 0x0e123f7c, 0xa7395adf, 0x2e5fb7c5, 0x8039cb04,
-	0x0f8e5ad7, 0x77c7e76e, 0x7cb9502c, 0x3d6b9608, 0x3e4423e1, 0xc1fc3c08,
-	0xeb84daec, 0x4045c6cc, 0xfacd1de9, 0xfa4f7b61, 0xf358c5f8, 0x2f67b34f,
-	0x8c5f8fac, 0xc7d5084d, 0xd7ae88ba, 0x75478015, 0x6150ea8b, 0xec8bf50b,
-	0xfaffc42e, 0x7689c566, 0x9516eee1, 0xf2fd61e8, 0x729bd228, 0x8f6e5fbd,
-	0x84aec419, 0x6b3ff052, 0x5a7d258f, 0x5fe62b1b, 0xfcc0bf06, 0xbabc6da7,
-	0x3d79e6dd, 0x6fad0e50, 0xe11226f9, 0x71593fdc, 0x4abb411d, 0x85818fab,
-	0x84df7814, 0xd70829bf, 0x322a0dc1, 0xad9ef5d6, 0xf6f09526, 0x8c378e2e,
-	0x0a33be75, 0xa6a7f5d6, 0x7b40bad1, 0xaf8eeceb, 0xeb05dd6f, 0xfae68daf,
-	0xeb9a36b9, 0xcebbd3e7, 0xbb7a41f7, 0x9274e176, 0x9ef4c37b, 0xdce5038f,
-	0x730efd1b, 0x6d4acc39, 0xd4e3fb47, 0x68fbe52e, 0xa235a100, 0x0aed1e9f,
-	0x06a9ca35, 0x1c4415db, 0x1f0039f5, 0x145b5f84, 0x073eafc1, 0xd6932ef8,
-	0xd9d70279, 0x14b2316e, 0xfc0b3f68, 0xbae4fd88, 0xcf7ac47f, 0x9a6f5f84,
-	0xa0b468ed, 0xbebfd50b, 0x1e20bc6e, 0xa2d57c60, 0x669c7da7, 0x67c44e51,
-	0x10c5d1b3, 0xc283deff, 0xab78103e, 0xba773411, 0x0f01c865, 0x81fd6fec,
-	0x7fbe2734, 0x48d9c77a, 0x47ed199d, 0x7d876a8f, 0x565de9a9, 0x5bbb87d4,
-	0x39de5ece, 0xc19be480, 0xbb3beb0e, 0x33ddb0ef, 0xcfed47e0, 0xfd88bf6a,
-	0x0dcdead5, 0xaa227681, 0x1a945259, 0xda5a523a, 0x220ca9fe, 0x0f2863fe,
-	0x57cc19bd, 0x3e5efb0f, 0x54d3d050, 0xd7be40e6, 0xcdbb7be2, 0xe00f619d,
-	0xb736cddb, 0xf385d703, 0x3ed2e6a4, 0xe83eb0b3, 0x0679e9cd, 0x0c6fee1d,
-	0xed29bd43, 0xb44fb93d, 0xfd7323c7, 0x5ef693fb, 0xce73fef7, 0x68c7da0f,
-	0x74ec83df, 0xc52c740e, 0x282d5a73, 0x03320785, 0x784adff7, 0xacfb16a9,
-	0xaab7308e, 0xcdb62fb0, 0xca53b270, 0x7dd0ac83, 0xf3869e00, 0x780f387d,
-	0x377fcf10, 0x4e11eb3b, 0xda1b0efa, 0x91afb0af, 0x50560fb8, 0xf8708c96,
-	0x8c9aecc0, 0x2599fef2, 0xf4fae88c, 0x14f7ccb3, 0xbb4b7a6c, 0x0366e88e,
-	0xffe882bb, 0x5b99dd0a, 0xebe266dd, 0x7e7ef8b1, 0xe50ea347, 0xa1cf8e6f,
-	0x797ab943, 0x474eb347, 0x2f19e0f4, 0x0f5674e0, 0x54dfebeb, 0xba48fea7,
-	0x2e9e1498, 0xabf6f042, 0xb849bc40, 0x30f4128d, 0x3286e10a, 0xb27f4bb9,
-	0x370fc233, 0xb54b0bc0, 0x58c78e87, 0xa9c20667, 0x7d63c5ed, 0x9abc613a,
-	0x8add8f97, 0xabf9a970, 0xcc618889, 0x418f2f5f, 0x30b2ffba, 0x72735dbc,
-	0x0f5b9d71, 0x3dab78c4, 0x157be48b, 0xbda230eb, 0xaddd7200, 0xd2eb900f,
-	0xe867db8e, 0xf7f1c628, 0x12d9510d, 0xe759f380, 0x461624b0, 0x3f72c85f,
-	0x00396dda, 0xe155f47f, 0xfcc5e4f9, 0xda476e18, 0xb25afc83, 0x9678b7dc,
-	0xe7a18c7b, 0x8e0df6f1, 0xb14e7f24, 0xc87a1ec6, 0xa78dedce, 0x81cf5ced,
-	0x3ae17660, 0xe2c5fd4f, 0xa9d342f3, 0x0cadf7dc, 0xdb6a74e0, 0xa05e79bb,
-	0xe3ac53a3, 0xdf9097f6, 0xb9d336be, 0xfbf078ae, 0x7e2c4b79, 0xfb8abcfe,
-	0x2f55d852, 0x407569bc, 0xbb2de2ff, 0xf001bde3, 0xbfe98abb, 0x4ceba6ee,
-	0x8fef979c, 0x20fb3be9, 0x274bd83e, 0x16501d12, 0x3c6af8bf, 0x373803a7,
-	0x14ff450d, 0x633f8fe7, 0x5ddd8053, 0x3dc6b0bc, 0x1fc02f26, 0xf9922e73,
-	0x0efaeb02, 0xab891e23, 0xfda999cf, 0x9e25bb76, 0xd62f4de4, 0x8f4de50b,
-	0x7848baf0, 0x3c25db6a, 0x913e0df7, 0x97c5f681, 0x07c5d83d, 0xaf7ec1ec,
-	0xdc7b1637, 0xf5fc7263, 0xdea77dbf, 0x5ef30ee6, 0xacff188b, 0xda127873,
-	0xd6c6c57d, 0xe1f9c2cb, 0x0b5339e4, 0x57ce37a7, 0x7fb8e346, 0x1f1a6739,
-	0xeddb5d6e, 0x3fe69fba, 0x0aab07d8, 0xf44b0bb0, 0xdced379e, 0x326ab05f,
-	0x3f2e6bd4, 0xd9ce8e3b, 0xdc845e92, 0xdb798abb, 0xf4b57f90, 0xbefdf121,
-	0x4b2a5bc4, 0x693dbc45, 0x11ba7077, 0x43f920fc, 0x396d470b, 0xe13cc8c1,
-	0x75cf03ce, 0x799235c3, 0xbede1e41, 0xfe7a40c1, 0x4e1ff3cd, 0x3f7a03cd,
-	0x5b60d6b6, 0x5ace530a, 0x51ed3bb7, 0x360da7f4, 0x1fa814d9, 0x865eb473,
-	0x4eb95f7c, 0x1c3d2375, 0xe27b7b5b, 0x00bf2874, 0x7582adfe, 0x50306e54,
-	0x770dacfb, 0xc109fb50, 0x12eb95d7, 0x7cbca3fa, 0x4481fdb3, 0xeface3c4,
-	0xf11ebfee, 0xeb68c5b2, 0xaaca183f, 0x263dc526, 0x3673de00, 0xb7d50646,
-	0xdc2cd8e8, 0x532bc487, 0x1dcfdd3c, 0xdc631eb0, 0x6b63c44f, 0x18d51f88,
-	0x92ccedc7, 0x9aefb029, 0xbec96721, 0x8a27bddf, 0x662bc9f4, 0xd6c8ec95,
-	0xb7f3ffc1, 0xf45ea12b, 0x3649de9d, 0x58f3c09e, 0xce866781, 0x8a8fa040,
-	0x7a2f5e08, 0x68764f51, 0x78254591, 0x1d5c82b7, 0x65de4a43, 0x7efd0b1e,
-	0x4753df21, 0xfd0e1ead, 0x1818c6c6, 0xb45fa1ea, 0xa06629ce, 0x4e797f27,
-	0xc06769ff, 0x9733467e, 0x42e2ed1e, 0x5f6a0866, 0x0a7d6511, 0x4c185aed,
-	0x28b0fa8f, 0xd8f9f822, 0x813daecb, 0x5b58c4f6, 0xbfa4bb70, 0xbfa0389c,
-	0xb1b97efe, 0x8fe7cf7b, 0x567d804c, 0x9ec953ec, 0xde5c90be, 0x41cafb8f,
-	0xda51bf7c, 0x29bdef04, 0xf9e6f3a0, 0x9052cb63, 0x86140abe, 0xe763ae7e,
-	0x5ce5f3c3, 0x018c9f41, 0xf1f9fb9e, 0xbb39d13c, 0x7f6c8ebb, 0xeebcc15d,
-	0xe2ffae3a, 0xcb0fd9e5, 0xf73b4eab, 0x87f5686f, 0x53fe7f96, 0xf078a3fa,
-	0x0b5e19ab, 0xe585ff95, 0xfe5c2dc9, 0x5685e56a, 0x6975c85f, 0x4e7d5bd7,
-	0xcf13d20d, 0xd7e27909, 0xfe7a4617, 0x6b8f9e33, 0x9e8486e2, 0x219ec18f,
-	0xea877978, 0x760e5ce9, 0x6fd8edd7, 0x5711d980, 0x665a4b08, 0xb9468acb,
-	0xdcf164d6, 0x97e01719, 0xa8d4dfea, 0xedd1f943, 0xfb0431af, 0xf5f9e46d,
-	0xffbe389e, 0x875e38f2, 0xfb9d2bf3, 0x92794437, 0x2f6f38f5, 0x7e3033a3,
-	0x85fbcb25, 0xaf7690fc, 0x9da577b4, 0x7d59ed2b, 0xb367b703, 0x7e41dd63,
-	0x5fafd633, 0xed183f90, 0xef73e474, 0xe7da28ae, 0x107b8a67, 0x731569f2,
-	0xa017143d, 0x7c0deb07, 0xbcf5dafd, 0x13ec2716, 0x413b26e6, 0x1d1ccfb6,
-	0x8d6f9e5e, 0xc2ff53d3, 0x40ca6fc7, 0xb6b3ee3b, 0xce50339b, 0xfff1a67e,
-	0x0f0fc4f6, 0x507d7e0b, 0xe15893e8, 0xf9087827, 0xedc0ea08, 0xfef02dae,
-	0xe26ec58a, 0xbe2edfab, 0x1747ca91, 0x8fe7a42f, 0xfcd265c5, 0xdc77c2b6,
-	0x23a700d9, 0x17d2552b, 0x3eee8d33, 0x91def0b1, 0x1bf91d08, 0xc799d70e,
-	0x3b63336f, 0xcce5f3a3, 0xf26c27c7, 0x1f01f806, 0xe90c7dc3, 0x09af9f79,
-	0x9d2a5ebc, 0x2b4eb356, 0x7a6eadea, 0xb7a2103d, 0xa72f11db, 0xf6226759,
-	0xfa3a55ab, 0xf3a12934, 0xaf5cc83f, 0x2366bf61, 0xd37c8feb, 0x92f5c51c,
-	0x029bdfb6, 0x9ed0ab7f, 0xd433f285, 0xcce4615f, 0x7b5e823b, 0xc4ef5d5b,
-	0x9333bc91, 0x56eb4edd, 0x3ef44e29, 0xb4e707ce, 0xc639f10f, 0x975fd089,
-	0xc775b56d, 0xc779f855, 0x185c71fd, 0xfe4f5c7f, 0xee3aed1f, 0xd570e789,
-	0x296485fa, 0xc4c742fd, 0xd9c5167e, 0xe844fc82, 0x0fe70f0f, 0x48de3aba,
-	0xd510dbfb, 0xa8b8c5e9, 0x3e7e66f7, 0x55e51a4f, 0x5a95dfd0, 0xfe8858dc,
-	0x71c67fb0, 0xbc7da63f, 0xf1cf1927, 0x4e8d92bd, 0x2c5ce3f4, 0x76680e3f,
-	0x478138f1, 0xd358eb47, 0x03ec8de1, 0xf0ec4aeb, 0x34a11a14, 0xf8d226c4,
-	0x096eac49, 0x11fa0de2, 0xa3dbf230, 0x743c8a7c, 0x213c9743, 0x91a56147,
-	0xaddb77c8, 0xbc3c531e, 0x5d467437, 0x53edfa3d, 0xe23c78ab, 0x6de9e284,
-	0x1b8d0ecf, 0x5e3932cb, 0xbb88aff0, 0xd0346fe6, 0x3e37f2ba, 0xfcd1f146,
-	0x95eb578d, 0x1f943900, 0x27fea06f, 0x9bd39d5e, 0x851f18fc, 0x880ebf8f,
-	0x4662f4e7, 0x8a10e11f, 0xbfa58687, 0x313ff17e, 0xf609dcae, 0xef3cb050,
-	0x20243f17, 0x0cfaa16f, 0x3c7d73c9, 0xc07f23d7, 0xd358057c, 0x7cc8661f,
-	0x8fe40d85, 0xbe6c6add, 0xde51e306, 0xbc431d1a, 0x2bf9efb7, 0xcd676bc5,
-	0xb6bc5070, 0xcf7dfdfb, 0x3ff6c72c, 0x118362cc, 0x87be29fe, 0x7ccff415,
-	0xc9e3c91b, 0xb1326edf, 0xd9a5b025, 0x3c53376f, 0x8e954d78, 0xeed17ca1,
-	0xe832661b, 0xa0db5c78, 0x47f8e02b, 0x0ef12839, 0x7c446404, 0xfc21bc48,
-	0x6e3198b6, 0x5fad02fc, 0x7e80cbae, 0xc7dc04f0, 0x4e906b96, 0x15d9557a,
-	0x75c817f4, 0x4c9f485d, 0xfa69ff8a, 0xc3d467e4, 0x9c5fc5b7, 0x74819e1e,
-	0x5ac3d5ae, 0x7164dbfd, 0x0bbf6255, 0x4213e1e9, 0xd7894dfe, 0x7e3043c4,
-	0xc76f0616, 0xf00c1c84, 0xff19df8f, 0x1fe3fc23, 0xe3091ca1, 0xc8c67f1f,
-	0x9da36fe5, 0x0c2936dd, 0xe627bcbf, 0x32eeadd7, 0x6f8cfea2, 0xb3cac251,
-	0xc651ab6c, 0xfae05713, 0x2b44fc64, 0xb7c0c38f, 0xde5ffb11, 0x7b0bbad4,
-	0x165ec6e5, 0x15dbe68d, 0x37b9c3df, 0x046b3ccc, 0x30163b9f, 0xea3aa38a,
-	0xa82bc918, 0xb093b8fb, 0x0023f295, 0xb8e04f1f, 0x9d638a17, 0x1d9215b6,
-	0x8656e324, 0xf8f3e0d8, 0xcfd9789e, 0x6fc447f5, 0xe27a0f7a, 0xb05d624f,
-	0x5fb067ff, 0x141602fc, 0x9971919f, 0x62af3af8, 0xc47547cc, 0x3bdadfc8,
-	0xf304b3ce, 0x3386ba3f, 0x8f5053e7, 0xa215b529, 0x72cfb53c, 0x66fc61b6,
-	0x9fee29f9, 0xf98f3e5f, 0x79012a96, 0xca2c9e05, 0x05bc4203, 0x0a7607fa,
-	0xac53b6f9, 0x5fe4f41b, 0x5abaf9e3, 0xa4f403e2, 0x756e87c4, 0xed784aab,
-	0x02a7af0a, 0x43fedaf0, 0xf919fd78, 0xe48b9df2, 0x852f0fcb, 0x9171fe6e,
-	0x8c4bf374, 0x3b090c6f, 0x578867df, 0x67407ced, 0xbef88347, 0x78db3a07,
-	0xf9d2f189, 0xa7a89fe6, 0x5dfae142, 0x5c28427c, 0xfaeb1657, 0x5166bc91,
-	0xd57a70ce, 0x4ffe6096, 0x12d891e7, 0x1e7a5c86, 0x3b7bfac9, 0x1967888d,
-	0xd5eb9107, 0xf6c88fe6, 0x0f25169a, 0xbb859fcf, 0xe039d3cf, 0xe8bfdb74,
-	0x079a101c, 0x0f9de7c2, 0x39fc8de4, 0xdcd01d56, 0xa677fc0a, 0x752748c9,
-	0x377e3995, 0x7bf7fd0a, 0xa0e7cc0d, 0xffd811fe, 0x5ffbc60a, 0x03bcb4d1,
-	0x305757fd, 0x479c57bd, 0x1db9ef95, 0x7c7c8315, 0xf2955ec5, 0xfe66d8bf,
-	0x2c458ebc, 0x4c74ff41, 0x02398e81, 0x8aeb19e0, 0x78008e62, 0x07b78dc6,
-	0x7939e5d5, 0xc13798ae, 0xfde82bdd, 0x82b31ba4, 0xae78a7fa, 0x3a9e7a08,
-	0x9ea8372b, 0xa822375e, 0xa385ef7f, 0xde99ea83, 0x67fa836b, 0xaa0e4c37,
-	0x1cde34e7, 0xab18ffd4, 0xec147c7b, 0x5bfa3fb3, 0xebcc3f00, 0xd60cb8ea,
-	0xb7ac433b, 0xa0f29aef, 0x5afd81f7, 0x53381e31, 0xcf17c990, 0x00abdf8d,
-	0xff08671c, 0x39bee5ce, 0x55cfe341, 0x677e88ab, 0x048e1a36, 0xacf469fa,
-	0xc02a4f6b, 0x38a7c6b9, 0xb95ea15b, 0xecf9f826, 0xbde81b1d, 0xf6e0bed9,
-	0xeb839bb9, 0xd29cde83, 0xb901e79f, 0x4672bf29, 0x87dfb042, 0x9989d085,
-	0xb599f4e4, 0x7aa5ffdc, 0x24e86afb, 0x27ec5f18, 0xd0438dd2, 0x9839298d,
-	0xc11d226e, 0xfaf95374, 0x0708a1d6, 0xfba3fc2d, 0x0bc9e869, 0xfe007eff,
-	0x7d306716, 0xfb4ee169, 0xec567583, 0x95efd850, 0x6acfb850, 0x2a797879,
-	0x633b850b, 0x1fd7233e, 0x688fedc1, 0xd981fde0, 0x89ca18f3, 0xa8163bb3,
-	0xe3638718, 0xecff3c79, 0xed07af8e, 0x2f898473, 0x97c484e5, 0xf80425d6,
-	0xe97c647f, 0xaf19c634, 0x67111764, 0x844ffddc, 0x8f00c807, 0x0b11f301,
-	0x71dd119c, 0x3c7f48c5, 0x653f2b49, 0xb9e3fa09, 0xfe2bd204, 0xbc3d6c78,
-	0x03e6343d, 0xc653ae37, 0x8ebe64e5, 0x930a2bcc, 0x8497fc9f, 0xb40fcc04,
-	0x75f9e347, 0x3a7cfb4b, 0x22bcc977, 0xc302f226, 0x4fa4ffd8, 0x14d7f19a,
-	0x26760bb2, 0x0afebd70, 0x176dd78e, 0xa92fbc88, 0x471a7bd7, 0x2a7adfc6,
-	0xc52a5d95, 0x2894bb13, 0xf46153e7, 0x3f0947ca, 0xe685bf51, 0xa8147f8f,
-	0x38ee6a47, 0x0bf507bb, 0x6c63fdc0, 0x6f4058b7, 0xfdbd7e2b, 0xd12b68bb,
-	0xaaebd76b, 0x9c342faf, 0xd8c47089, 0x222d8e01, 0xe445afdf, 0xd6f5c9fb,
-	0xf4baa445, 0x9c1ed879, 0x8ae327ff, 0xc28dfdda, 0x3afe71fe, 0x976417bc,
-	0x76e5cf2c, 0x870169db, 0x276e160d, 0x9db91318, 0x1f39ab50, 0xfb7036d5,
-	0xacd7a40c, 0x8c718096, 0xdfea1689, 0x4c685cdf, 0xdf8471c4, 0x42a67965,
-	0x4572c576, 0x77e47b21, 0xfcf4d1b6, 0x868509cf, 0x6fffe844, 0x6011af31,
-	0x16636588, 0x93438f5f, 0xe892fe17, 0x68c252ff, 0x36898d2a, 0x5db67fe1,
-	0x6a91f481, 0x5da91976, 0x8aa71f0d, 0x1afbe44e, 0xb464f229, 0x42718071,
-	0xdfdfa26e, 0xe2d2edc4, 0xfe4189b1, 0xf18cf7fe, 0xd0afdfc2, 0x53942eeb,
-	0xef7814bf, 0xeaefffc9, 0xf1476b67, 0xaffff5ad, 0x7ffee48c, 0xf1081f19,
-	0x85c73bff, 0x1e23fff5, 0xfe7eeda2, 0x2dd893e9, 0x3e50d29f, 0xea7a30ed,
-	0xb5d5fcf1, 0x6878ec1d, 0xa4ebe7ee, 0x7dc0c0b8, 0x673c4ed9, 0xbb64cf2d,
-	0x4b6f482c, 0x7f3b4318, 0x696ea747, 0xe95f3c24, 0x3e7c3665, 0xbf3f2d7c,
-	0x3871ae55, 0x0e529b71, 0xfdc89d5c, 0x1f380687, 0xbdf1725b, 0x27186dc9,
-	0xd9953958, 0xb2350d51, 0xda2b22c6, 0xd8596b45, 0x4168e3f3, 0x770a134f,
-	0x4276fe51, 0x0fb7cf17, 0x7693a7ed, 0x73e2217e, 0x2ce79758, 0x7971cf8f,
-	0xcf112242, 0x5f3aeda9, 0xb27d73b8, 0xa46ae8ad, 0xf0be81af, 0xc29188e7,
-	0xbb32e64f, 0x03f8e227, 0xd87cf1b7, 0x677f294a, 0xf01e98e8, 0x75e0453e,
-	0xd79e5aca, 0xff7fcec1, 0x45ed2abd, 0x9433e346, 0x2d53952b, 0x5513f43e,
-	0x697a64b6, 0x99c56e5d, 0xe5a2f283, 0x2bd6376d, 0xe86df3f3, 0x9dfd7097,
-	0x91fb4729, 0xfcb8c9a9, 0x52a3b3d2, 0x8f1e909e, 0x64d438a7, 0xf1236f41,
-	0x72409cb0, 0xc034657e, 0x92ed72bb, 0xf3d7985d, 0xc5191ffe, 0x5da80e9b,
-	0x5fb07143, 0xe6167001, 0xa567a962, 0xa648b7e4, 0x718aa671, 0x7982ffbc,
-	0xfef3fc23, 0xda75e5aa, 0xf30301cf, 0x9d1d0046, 0x038379de, 0x09e5eeed,
-	0x93cfe411, 0xaa83da71, 0x42523ee7, 0x5c1aaefa, 0xd12d4dda, 0x9c83f436,
-	0x3a61f9de, 0xb93e4dc6, 0xed05ace7, 0xbbe87fd8, 0x7c2f982c, 0x16bbd17c,
-	0x93f1c017, 0x9de52a45, 0x86f42add, 0x897dfb84, 0x271fee1c, 0xdc2117ba,
-	0xddfc5b6f, 0x2a3cc0d0, 0xe88130b6, 0xa54fb679, 0x9cb75c90, 0x168d1cdd,
-	0xbabd774a, 0x2ea82e39, 0x89b540f5, 0xbf3b85d5, 0x69e824bc, 0x6306d376,
-	0xf7e703aa, 0x38fa42ac, 0x7474e7ae, 0xe7c59b7c, 0xa7aff4cd, 0x11b069bc,
-	0xb47f83ed, 0xea2b5898, 0x81877d33, 0x8abb49e7, 0x8f0ba015, 0x9d76bfc0,
-	0xa68e5e7b, 0xc63e66f1, 0xcc1947e5, 0xebe010b5, 0x724d9969, 0x998fbb41,
-	0x25c6389f, 0xae675c01, 0xe3fa1850, 0xc022ffb0, 0xfde1679f, 0xa5fda15f,
-	0x379967dd, 0xf9480e58, 0x3cf02955, 0x79f821bd, 0x696fcb65, 0x43cc199c,
-	0x27602079, 0x735f9e69, 0xd80af50c, 0x67ed4147, 0x519b66f6, 0x14496f8f,
-	0x6ca1edf1, 0xfef0f7d8, 0x18ec88ae, 0x927e184f, 0x36c5c9e5, 0x17cfd622,
-	0x7c795047, 0x5172a331, 0xaae3a722, 0x44efb796, 0xc766a97b, 0x738e2316,
-	0x9681f1c9, 0x999bd613, 0xe896ef5f, 0x1e21af3d, 0x28252cd9, 0xe1b3504e,
-	0x32ec91ac, 0xd1529f01, 0x00f08a5e, 0x1cc2dc3c, 0x503cf1ab, 0xc7f0655a,
-	0x5bffe0e9, 0x60c3bf72, 0xd1da80bf, 0xb5173991, 0xb94fb95f, 0x5abcf96f,
-	0xf30c7a05, 0x4583e4be, 0xd8cd1f42, 0x2f796938, 0xcefd5100, 0xfc9d1963,
-	0x78f649bc, 0x516bc091, 0x8f64fdc4, 0xe3d88517, 0xb7dc3dec, 0xe64ac7a4,
-	0xa5a23d24, 0xcc07493b, 0x23f7a06c, 0x4ddebd84, 0x120f2d6f, 0xcc3d245c,
-	0xe4685d5c, 0xc8c79be6, 0xb26f4aed, 0xa326d7f0, 0x30e816bf, 0xba063ec8,
-	0xed6baa0b, 0x9d0d2ff1, 0xb41f2819, 0xe7ccb876, 0x60e7c2d4, 0x9a5fcf22,
-	0xb38d70e1, 0x8073c00d, 0x85f9397b, 0x10ca46f1, 0x3dc6dbe4, 0x6edf2377,
-	0x0ff37ce4, 0x92b30f41, 0xf049113c, 0x9af4b3dc, 0xe77fc41a, 0xf2065312,
-	0x8a6967b3, 0x3dfd0f1a, 0xc39214ab, 0x18a697a3, 0x97d3ce11, 0x7c871e0d,
-	0x345ccb9d, 0x1638b4fe, 0x9c186ed6, 0x7947e5c4, 0x6319819d, 0xf4462908,
-	0x506a9f0b, 0x9a8c2fc8, 0x6be02264, 0xf557c096, 0xa4adb78a, 0x6ff01caf,
-	0xe01f5e28, 0x2aeab33f, 0xee701f09, 0x52c7cb08, 0x66b154af, 0x3b8c0a63,
-	0xd11b6567, 0x82479c31, 0x95b2d7fa, 0x66eaaf84, 0xd5dd7b4d, 0xb9d83f84,
-	0xb589cf11, 0xf79f823b, 0x8276124f, 0xbe913993, 0x225a773d, 0xb471af30,
-	0x4ad94f80, 0x6b7286c5, 0x84b6b2fa, 0x7d3ea01b, 0xed84eaaf, 0x8587c374,
-	0x1f2823fa, 0x1cdecced, 0x719c57f2, 0x9fb09238, 0x52edcac7, 0x8619ef45,
-	0x3ce2d3ed, 0xd8cfd0c3, 0x618591f5, 0x73a1df7e, 0x11e4732a, 0xfca20f95,
-	0x341b1b2a, 0x2fbec029, 0x3112d833, 0xf365e91e, 0xb83dc593, 0xd4f84088,
-	0x7e24ac46, 0x887e45a8, 0x34c3f3f0, 0xdda17b8c, 0x7942a2f3, 0x30476c84,
-	0x34709fbd, 0x9091c226, 0x9033efb9, 0x8a6f2e9c, 0xf971f3a5, 0xea2322b2,
-	0xb16df2d5, 0xf9c11f64, 0x86cbbdf4, 0x6879f1fa, 0x649ede59, 0x39bcb718,
-	0xe306a9d3, 0x19dcf431, 0x0d39ceb0, 0x8efe2487, 0x23bf80f4, 0x7807f0e1,
-	0x4f2f6a0b, 0xe0497212, 0x238a2d8d, 0xef3a5abd, 0x58089cd5, 0x48ba99d7,
-	0xe9ec93ca, 0x8c66c47c, 0xe903fca0, 0xabdf1abf, 0x7944cfdb, 0x0e57673e,
-	0xf169fc21, 0xd3dffe36, 0xcbbda187, 0x68616efe, 0x66cb4d67, 0xf6864db7,
-	0x6fce14db, 0x19afead3, 0xddc4768f, 0xbd9e5c49, 0xd5d07205, 0x41b7b197,
-	0x0e40ba0e, 0x11f20bbe, 0x4e2fefeb, 0x8b87faa6, 0xb47e541d, 0x47951fb8,
-	0xf25fbf84, 0xd102101d, 0x2e2492ed, 0xc9249717, 0x6482faf8, 0xffc66934,
-	0x3a21ddfb, 0x6c67de1b, 0x9d36309b, 0xc15cebb1, 0xa9c6f7fa, 0xd3b5fac1,
-	0x8c971b60, 0x0a15dbe7, 0xeee5a3d9, 0xe1fd4191, 0x7bc464dc, 0x9e5fac2b,
-	0x86f49dbf, 0xe81938c3, 0xb8e2a6f1, 0x37d7fea0, 0x9fd506a4, 0xfad07248,
-	0x0ecf8d26, 0xb4b9bf6a, 0xecbd507f, 0xa431919c, 0xf1014777, 0x679102cf,
-	0x8e770704, 0xfbef1b17, 0xa4b0dd75, 0x5fbd60bb, 0x73d033ef, 0x5e243e2d,
-	0x9951ac67, 0xbe9bc607, 0x2c1fe406, 0x74e348f1, 0x0e2fafe2, 0xb25ce858,
-	0x7f6f29bc, 0x350fd401, 0xe80f2819, 0x55b8b2d0, 0x6a1daf68, 0x2832b04a,
-	0x6155cb3d, 0x2c8cd8d7, 0x2d15de40, 0xa6f9425b, 0x93933e65, 0xef7697ec,
-	0xc0eeb293, 0x122e2af3, 0xd53de4f9, 0xfe10aad7, 0x67df045c, 0xe15ee922,
-	0xf127b071, 0x4ef4e12a, 0x0ae3aebe, 0x13f5865b, 0xb9f71f91, 0x6a71d60b,
-	0x0e856362, 0xbeea15fd, 0xcf9f9204, 0xb6e90cab, 0xf2819e74, 0xafbf660c,
-	0x533ac06e, 0xbe395372, 0x66a3ca55, 0x7c6898cf, 0x021405d6, 0x6d3c16fd,
-	0xae01ea7a, 0xfb7d78ff, 0x8203df40, 0x8e8e913e, 0x2c5732c7, 0xf5a1562d,
-	0xc276fe7e, 0x87ee7c06, 0xee106fa7, 0xfdc1bd7b, 0xefe01266, 0x20df0af3,
-	0x128b6f92, 0x70b4af88, 0xf2e4623f, 0xa07c8bcb, 0x9fa6e5f8, 0x7e9296cf,
-	0x26706e98, 0xe56e493a, 0x3adca0a7, 0x7640d2b2, 0xacbbd330, 0x3e8f4893,
-	0xe72c744f, 0x8c77a239, 0x691df5c3, 0x5f9864c8, 0xa552be51, 0x1fd20af3,
-	0xe7e3efef, 0x0f5587d4, 0xdbcc24d8, 0x525878a0, 0x3edcdd28, 0x5de5186f,
-	0x596ded6a, 0xeabc097e, 0xe64bb009, 0x8179e4ec, 0x3f53bf2c, 0x3ee06075,
-	0x3cf9f196, 0x4af94105, 0x1daf5955, 0x2ec8eb34, 0xc273c18c, 0xa254f789,
-	0x8d5913b3, 0x9f019343, 0x86bb7527, 0x2ff505de, 0xea8f7a26, 0xda223ea1,
-	0xeb842ff3, 0x0ccadd5c, 0xfaf30b25, 0x091aaf0f, 0xacfe7def, 0x2e6c49c1,
-	0xcf39fcec, 0x43fdeecc, 0x1bd815f6, 0xe1ddb8bd, 0xcffbc14a, 0x1acd1d73,
-	0xc7c3807b, 0x00204981, 0x056adb17, 0x7876376d, 0x3c01e588, 0x31d74f57,
-	0xe079e04f, 0xb1e3c8b0, 0xa873f324, 0x24a61bb4, 0x5d333973, 0xbd9be9c7,
-	0x037a70ac, 0x0f502afb, 0x173db948, 0xbf55aaf3, 0xbb72901e, 0xfe52358a,
-	0xdb99238a, 0x1f15b32f, 0x9835ddd9, 0x2bfd0289, 0x56683c6c, 0xf3e4d9b5,
-	0xb698d265, 0x7a60fb40, 0x73279732, 0x8e3ecf8c, 0x3ac95be4, 0xfd353ef8,
-	0x2af8373e, 0xf543323a, 0xc36d854f, 0x6f8d3b32, 0xb79fa270, 0x756bf052,
-	0x256be2a3, 0x51eb853b, 0x299d57e9, 0x3f56a8f4, 0x8d25e885, 0xd1a99a3e,
-	0x5831acbb, 0xe97ac2cf, 0xaf5cb2de, 0x68ee9d76, 0x0e61c10b, 0x6ff50bac,
-	0xa7b7c785, 0x38add684, 0xeb21a301, 0x31ee64a9, 0x780fb8b1, 0x5d08eade,
-	0x215f769f, 0xd4fb15eb, 0xf9c2bbae, 0xbbe62b55, 0x04293554, 0x243eed2f,
-	0x9c76b43e, 0x97854bc4, 0x45a2b7c3, 0xd67e7c21, 0xf2321f6d, 0x61ba4b6f,
-	0xe02ff0cd, 0xb047497d, 0x6f9412af, 0x1e41ab95, 0xd3d28667, 0x456cd61c,
-	0xad61a9ba, 0xdf9053cb, 0x1faf9b5a, 0xb5867e8e, 0xa9f9d36f, 0xa39aded4,
-	0x7a50058b, 0xbf8e5773, 0x17e74fca, 0x5cfc278a, 0xe9ddc3f0, 0xe01e9fa5,
-	0xeaa37335, 0xd4141c8a, 0x7a3fe44f, 0xbcb38e09, 0x63fa235e, 0xe53f0967,
-	0xab59d685, 0x2e5ff7e7, 0xcf015eb8, 0x0fdd7b9f, 0x7764f727, 0x76173f85,
-	0x3d1a5bdb, 0xfb81b1ff, 0xfe7ca55b, 0xff22ef5a, 0x3b0bb42e, 0xe3c6ceac,
-	0x9eb91a7d, 0xbd724f9e, 0x3979e842, 0x5b35d1cf, 0x13305e29, 0xf68080ed,
-	0xa56f56cf, 0xd9f1a578, 0xcbb45699, 0xbe99ae8f, 0x8f52f30a, 0xbd274d36,
-	0xa97bf95f, 0x40c63df7, 0x4d68a27b, 0x907bfad9, 0x5247378e, 0xdda2b15c,
-	0x2045ce23, 0x639fa167, 0x6cab970d, 0x95b39735, 0x90071fa8, 0xfd8bec7e,
-	0xf4f0acee, 0x68087e45, 0xe779bd27, 0x779fcf74, 0xfe77b8c2, 0x25e9da29,
-	0x755ad850, 0x5adbcf64, 0xcf563f51, 0xde20f0ff, 0xe07b01d3, 0x7b4b5ffd,
-	0x0645aa00, 0xea325b4f, 0x54076121, 0x6c321bab, 0xbd083768, 0x7f801ff1,
-	0xe7f87844, 0x11cbfc12, 0xdbf101fe, 0x9c381b4f, 0x7fe06ba7, 0xcbc72578,
-	0x2b6ca6f2, 0x6d3f2f9e, 0xebbb26c8, 0x821ca6d3, 0x00078cff, 0x1f5fdcfe,
-	0x0035776c, 0x817cf1fc, 0x96f587f0, 0xfc043bb7, 0x0dfe1c9d, 0x256cee1c,
-	0xc084672f, 0x57f94bd9, 0xe4d1fe77, 0x78e23b44, 0x57d92b64, 0xaca8b7c7,
-	0x932ec03e, 0xac37d176, 0xdfb449f1, 0xf767fc24, 0xf28418e9, 0xd7e1f4a7,
-	0xd98788ac, 0x3150785b, 0x95ccfe04, 0xeec7f144, 0xa8edbbf9, 0xdd5f116f,
-	0xe245d476, 0x19b986a9, 0xd796c7e9, 0x4239e00e, 0x45bf7171, 0xb66fbc8d,
-	0x19bef823, 0xda9592e6, 0x8ce2c5d1, 0xa4f5c088, 0x79d3ef69, 0xbebdc618,
-	0xd6eaf9cd, 0x5de7c4f9, 0x25b97941, 0xfe80d5ac, 0xd0acd636, 0x05eaed3d,
-	0x8642d685, 0x5a3ab571, 0x09453387, 0x56aecbca, 0x564f6475, 0x447c4519,
-	0x892455e4, 0xdc29497e, 0x629c902f, 0x2474f2a3, 0xda707d23, 0x7de1f462,
-	0x255f382a, 0x9ddefce3, 0x41dbc226, 0x5fc0135c, 0x333f0a35, 0xb7a442a8,
-	0xd3a7185b, 0x297bcc5b, 0x972707ae, 0xa71fa875, 0xc939342d, 0xa18f8dce,
-	0x42cdd2f8, 0x5e62ddde, 0x313d46ee, 0x61746ccd, 0x317ae309, 0x1a30d7f9,
-	0x0df987a6, 0xef748cbd, 0xf3a234b0, 0xdf123c59, 0x8ef87c96, 0x95ea5808,
-	0x1fa38e60, 0xf6dd7e18, 0x5e285c7d, 0xf609f8fc, 0x8546d74b, 0x170c8bf7,
-	0x2e5c5070, 0x609b3ff2, 0xc75828ec, 0x6f0714a8, 0x3fb8d877, 0xc9e02d7a,
-	0xb6afc7e2, 0xfc79799d, 0xb1f30ab2, 0xbc58f7f9, 0x5d541f24, 0xc8cabd50,
-	0x62794f9f, 0x34eaf143, 0x8e61dec6, 0x2ab78881, 0xee782194, 0x61f18b2f,
-	0xf43aef7c, 0xd4b1db87, 0xd64cbd13, 0x978eaf33, 0x0e3b660d, 0x25e3fdc7,
-	0x2abf9e02, 0x0031ad60, 0x83d7d6f7, 0xb437f3fd, 0x02fb5aea, 0xb7d3af7c,
-	0xea7d21b6, 0x1b061c22, 0xaf1ee3cc, 0xa539e2e4, 0xadc5e96a, 0xa689e2b7,
-	0xa0a3d5e2, 0xacf9e3ae, 0xfee6bf5d, 0x59805b89, 0xeab76e11, 0xcb9abb59,
-	0x52e100e9, 0xa978776b, 0xe2853cdf, 0x202e3237, 0x86183ff1, 0x2de3c40f,
-	0x4e307d62, 0x37df1583, 0x7cd7c786, 0x8ccc2f81, 0x15cfb846, 0xf257377c,
-	0xbf30535b, 0x0478823d, 0x2ed0553e, 0x22ddb806, 0xe2f89eca, 0x476e14a1,
-	0xcfc2943f, 0xe25cf7ef, 0x95dccc7c, 0x82797941, 0x7c4daa5f, 0x75ff397c,
-	0xc5307ca2, 0xf5cbe34e, 0x8a7ebd00, 0x0240e8e3, 0x691ebd20, 0x68fb27ac,
-	0xc3880b16, 0x49fbfa65, 0x77ad0eba, 0xf7dd11cb, 0x66bb1a58, 0x5f95e820,
-	0x8e513a44, 0xce6c62de, 0xf68733a9, 0x52e67193, 0xefa061d6, 0x993f4903,
-	0x55633fd0, 0x9535e533, 0xf41efc2a, 0x578b42e9, 0xc7e27607, 0x067bbe22,
-	0xa79c46ec, 0xfca15634, 0x773169af, 0x975f2096, 0x2c7a8d5a, 0xdff1163f,
-	0x8d17595b, 0x2b2d89ff, 0xdf8606e6, 0xe631504d, 0xa4f80b07, 0xadfb05d8,
-	0xebc3f947, 0xe4695d2b, 0x4ff5128d, 0x665c61f7, 0x03a079ea, 0x762e1faa,
-	0x5fa7bcc1, 0x91d9cf15, 0xfa7e7c62, 0xdecf413e, 0xe9de34e3, 0x53f3e4c7,
-	0xf90af9fc, 0x7f5e2bfc, 0xea2f8e50, 0x2f9e6b0f, 0x827f3cd1, 0xf89f5bd7,
-	0xf68bd8aa, 0xda4e68eb, 0x921423a5, 0x37214657, 0x12b6974a, 0xbb754b9c,
-	0xb59a3978, 0xdc2ff2ea, 0xdb8a64ef, 0xf7809298, 0x50588fce, 0xd533ff0f,
-	0x7e814c65, 0xfe79269f, 0x499ce586, 0x7288d78a, 0xe91f3df7, 0xf21e9285,
-	0xae428d27, 0xa6e5ea9f, 0x831ea5f7, 0xf1c3de71, 0xbb9c752f, 0xe4f9c743,
-	0x4d738cc7, 0x4738c86a, 0xfebecc7f, 0x24e1ca9c, 0x517691c7, 0xe94bba71,
-	0x663afc85, 0x70bf9064, 0x18cebdee, 0xcc314bf4, 0xcfd00377, 0x919cda5d,
-	0x7dcfe307, 0x0a8cc5ee, 0xbe849bb4, 0x32a739af, 0xdaa3c817, 0x5f950a73,
-	0xc4647db4, 0xdb35b37b, 0xa0e38cda, 0x45942d5f, 0x12aaeb01, 0xa77d04eb,
-	0xa7a01c9f, 0x4274bd8d, 0xf3cc3c6e, 0xa13b9e32, 0xd5ce7c47, 0x3dfd1f35,
-	0x4a11efea, 0x97f2f8d8, 0x7b077f62, 0xee611fb8, 0x6151e5c5, 0xee34576f,
-	0x390614f3, 0xfaa2fc60, 0xbf02f9f0, 0x1528eb12, 0x50fa6ffa, 0xe003844b,
-	0x1e3de43c, 0x9b58af5f, 0x62fe8b99, 0x04e8f263, 0x7e8f5b82, 0x67ee2ed6,
-	0xd67ee16d, 0x02c77b52, 0xbb994efc, 0xf883ec57, 0xbf09b2dd, 0x2c067c93,
-	0x378eef0b, 0x89bf7ac9, 0x3f714663, 0x7ef3d618, 0xf220f99f, 0x6e28decd,
-	0x361b4ecf, 0x43e50a30, 0xceb46667, 0x4facfc06, 0x4af7732a, 0xc6abf6c0,
-	0xc9a17b61, 0xe08ca7d2, 0xf42e88cb, 0xb8feee49, 0xfe8fec4e, 0x35b18f11,
-	0x87d806e1, 0xee950de7, 0x45067803, 0xcbc5c27b, 0xe5c5ef2f, 0x8d97bbb9,
-	0x0757b1e0, 0xaff5cceb, 0x760fce43, 0x180e82fd, 0x94d2c8ef, 0x30380fc1,
-	0x5d78531e, 0xfcff04af, 0xa33c92b3, 0xa23fe702, 0x68f07d63, 0x18ebb171,
-	0x1d71f02e, 0xf74a06c2, 0x80b7a028, 0x31e4def3, 0xa9f541d1, 0x15cc71c5,
-	0x9a9dbfe8, 0xb1bf541a, 0xffa83b34, 0x07fa33cd, 0xea689f3d, 0xb00bafc8,
-	0x97b67b67, 0x5a9f04bc, 0xed0a258b, 0xbe5a4fba, 0xb416e0f9, 0x4eaa3703,
-	0xef6759b4, 0x48c1f4dc, 0xf00675e8, 0x497e471b, 0x3ed1f907, 0x7a747997,
-	0x7e303e97, 0x50758a74, 0xd73ca2be, 0x68dc6c5e, 0xf29dadae, 0x78ae7f09,
-	0xe25ebcd1, 0x72cb9bfc, 0xa99e3f51, 0x79fc9f7b, 0xcfbe6635, 0xe21e2f53,
-	0xbd442ddf, 0x357f7402, 0xe2f688be, 0xc0fc1039, 0x0e3b45ff, 0x86cd9c51,
-	0xf7b44dc1, 0xf1e9e6d3, 0x942d64fe, 0x81c65fa8, 0xba018adc, 0x036368e9,
-	0x48de61b7, 0xe5db85a6, 0xbf90a6e7, 0xf7146f7c, 0x8c4decfb, 0xcc48efa5,
-	0xda86b86d, 0xd345ce6b, 0x1da96ff8, 0xfa2f28e3, 0x13e28505, 0x2da75313,
-	0x8decfdc5, 0x1db80ef2, 0xe7f89de6, 0xdc23c7ab, 0x7bf1b66a, 0x77d51302,
-	0x5941e7f2, 0xbd0d78d5, 0x7b65513f, 0x621fb015, 0xe342ddce, 0x001b444e,
-	0xcb50eaea, 0x5597a803, 0x3f9f6b63, 0x5a31bca0, 0x9ed4de48, 0x26f7a48b,
-	0xfdfd7114, 0x0c4f217b, 0x635d7c9d, 0xe7a24dcf, 0xbd7c2e92, 0xf7f282b2,
-	0xf51b090d, 0x4321bdf8, 0xaffd42a7, 0x4a9fd73d, 0xfa37dfb9, 0x2fbe91fd,
-	0x7af84860, 0xbe8de61c, 0xc8d8af11, 0xe3c8d12c, 0x62c375b3, 0xd5791858,
-	0x9e39cf3d, 0xc73a6c6f, 0x3bff8ff3, 0xe417f5cd, 0x9d4592c3, 0x31178c7a,
-	0xe10d8473, 0xd8305255, 0x67c01151, 0x8c9baeea, 0xeac31f88, 0xafa88db7,
-	0x0516504d, 0xf916af3c, 0xdd795a58, 0xfc83e422, 0x3fd49b8e, 0xd106792c,
-	0x4136ade7, 0x9e8f82a0, 0xdf2c7c16, 0x0e33a0ef, 0xf73b71e0, 0x79a6b7f3,
-	0xd13942de, 0x7c6ec851, 0x4767e49e, 0x7e69c606, 0x9e03f5ae, 0x1bb21423,
-	0xbeaf293b, 0xc3a1c0a4, 0xdd7bc0f8, 0xf3f3877a, 0x26d1f685, 0xca96fdf6,
-	0x6fb8e216, 0x1d97f2fd, 0xedaf182e, 0xd43cbcee, 0xcfde720b, 0x0b7bf17a,
-	0x1e75d6cc, 0x2fb587cf, 0xef903b47, 0x0ce1e227, 0x4d3ba2e3, 0x76816e74,
-	0xbed4778a, 0xef0a7a6c, 0xe15ad5bb, 0x17f30afc, 0x8ad912bd, 0x4af6dc74,
-	0xc7f51ea4, 0x9f3dbd1d, 0x5e8a7c21, 0xcf063be9, 0x9316ae8b, 0xe3fd919e,
-	0xb6f24a3a, 0x485ef587, 0x4ce9697e, 0x81a7a7f2, 0xa0994bf3, 0x7fc172d3,
-	0x6747c11e, 0x0f8892eb, 0x45822ecf, 0x91753c63, 0xda1b7032, 0x7d0b0e0b,
-	0xe5f24e97, 0x411f3c44, 0xb1fec4fb, 0xeaa18f74, 0x1f106c5c, 0x14cb9f56,
-	0xed471dfc, 0x05cadf92, 0x7d84989f, 0xb5d04331, 0x3f245bb4, 0x624f74b2,
-	0x6263ec2a, 0x95bdf03d, 0xc8f9fee2, 0x31ba7e4f, 0x80be90da, 0x022b926e,
-	0xedbea7f8, 0x8a768626, 0x744dde29, 0x40ca0333, 0xb766653b, 0x971b629d,
-	0x592feb08, 0x7bc3a996, 0x6a79f29b, 0x7fd1a5ea, 0x27c8aa44, 0xa0e6b730,
-	0x8ba86b5d, 0x9a7de274, 0x1e3cf133, 0x87057f34, 0xbb837ce3, 0xf98ced08,
-	0x3fe4284f, 0xe503fb43, 0x7503d0d2, 0xcabf40c6, 0x5106e74d, 0xb9ca7d3c,
-	0x2634a8cb, 0x38472e7b, 0x5ebb9d94, 0x8fd06be0, 0x710e3f8a, 0xc192bf71,
-	0xc86e7267, 0x4792bf44, 0x4f1f3c45, 0x0347b667, 0x546b7de3, 0xb8c98ff2,
-	0x9933f4a4, 0x804fdef0, 0xdf46fd3e, 0xa3df4198, 0x0a9dfad1, 0xb93ffeb9,
-	0xbffa40d1, 0xa19dedaa, 0x79fe783a, 0xf5092ba6, 0xa7837ac9, 0x6733f708,
-	0x0339efb2, 0xb83ee7d4, 0xe1dc3ad5, 0xbeb36787, 0x69f50735, 0xfd11c033,
-	0xd52bcd5f, 0xf76e3ef1, 0x1a38f344, 0xcf496fa7, 0x739f3a5a, 0x73e09b2e,
-	0x7a44ceb6, 0x2dd02ce8, 0x5243d00b, 0x2f3948ef, 0xeba48ff5, 0x5f973d6a,
-	0xca18e6d5, 0x9debf323, 0xa442ee49, 0x1f3c7ebb, 0x9e77afd0, 0xf902355a,
-	0xe53c74e0, 0x21bd4b5d, 0xc585e0f9, 0x244794c9, 0x03e492f5, 0x7ca5cf29,
-	0xf52f7497, 0xfd3fe8d6, 0xc3bfd6ef, 0x3cd293af, 0x7d02a577, 0xfae7ab5d,
-	0x85bd5aeb, 0xfc6c67e8, 0xcdd23d24, 0x43d1cbc5, 0x0a1e8e42, 0x3d35a392,
-	0xa94581e8, 0x1c5e7e52, 0x7c11cc1f, 0xedc4de33, 0x81f39448, 0x8da6b5e3,
-	0xb1f7087e, 0xd9eb953a, 0x3ddd6b9f, 0xa9d5ffc9, 0x97ff2697, 0xfc9c5ea4,
-	0xfe54efff, 0xbcad0a9d, 0xa3710fc7, 0xf3bd3fbc, 0x83ea1f72, 0x03f40c83,
-	0x6896c1ea, 0x0fa126c7, 0xc5445f48, 0x1f487ef8, 0xfe9ef614, 0xf5e1a9df,
-	0xff6c66c1, 0xd240fab1, 0xc91be497, 0xb42f9227, 0x62f9247c, 0xbce16fc2,
-	0x8b7a7888, 0xd6aa8fdf, 0x0e289b7b, 0x8c1e88e9, 0xc76dd9fc, 0xdf88536d,
-	0xe084f442, 0x04bf3f1f, 0x1fc90deb, 0xff245f92, 0x98fe0b54, 0xf243f829,
-	0xf9b56ec5, 0x0a9811d1, 0x08f9e690, 0x93e488e5, 0xfab5e7aa, 0x42ba47a1,
-	0x199b234f, 0xae90c75f, 0xa40ca1aa, 0xfc0f532b, 0xf512f070, 0xa48bbec2,
-	0xf3feafa7, 0x0f55f4f4, 0xa7e674f4, 0x1da853d0, 0x03be61fb, 0x1f3673d6,
-	0x9fa66de4, 0x8dfc26de, 0x9b21fb71, 0x46f6079f, 0x35ee7df1, 0x67ff93a6,
-	0xcf3cf7c2, 0x3303da57, 0xd241bf85, 0x01d81e69, 0xf8fc4369, 0xbcc0f3c7,
-	0x847b938b, 0x877c5367, 0x3327cf11, 0x03b40ca1, 0x537fb27a, 0xee4d2ed3,
-	0x17fe8a45, 0xb480f3c2, 0x1c6edd9f, 0xaf1e1690, 0x027ed303, 0xa262275e,
-	0xb22bf92a, 0x00a35c4b, 0xba890f3f, 0xc2094fb7, 0xf902faf1, 0x2e55b2fc,
-	0xd607ca3d, 0xf475ddfd, 0xcaa5bc77, 0x31fece7a, 0x8f099eb0, 0x1d1fbf32,
-	0x151d8f9e, 0x511fedd3, 0x717fbf98, 0x95fed65a, 0x451be7a4, 0x9ea74ade,
-	0x3d4483c7, 0x8096ea1f, 0xbea6817a, 0xeab7f796, 0x3e60593b, 0x928dd209,
-	0x0eecf1cb, 0xfa601fb0, 0x2fa8b3f6, 0xff430a6c, 0x86fc6d46, 0x5ca2cf57,
-	0x6c50a1db, 0xde0e1baa, 0xfa070481, 0x07d5383e, 0xc65d77ef, 0x78dbcdd8,
-	0x43b5f6fd, 0x132f7956, 0x1bdc06e3, 0x2e2b3432, 0x502847ca, 0xa199597c,
-	0x4d3dbef0, 0x1eb913ca, 0x0214f746, 0xaf9867de, 0x77ef2977, 0xd1674de7,
-	0x4ba6adfb, 0x5186ff98, 0xac6fefe1, 0xe4c6fd10, 0xfe7d84c7, 0xe1ca9a70,
-	0x3406fc2f, 0x694d343f, 0xff9f7f0e, 0x1d2fc109, 0x78213f18, 0xfe855a4e,
-	0x84a30eed, 0xc2157bb7, 0x41632c7b, 0x9f98347e, 0xbad71bea, 0x7cf41a4b,
-	0xbc0d2ebb, 0x77bf687e, 0x03db05a5, 0x5f069bf4, 0xf7801fa6, 0x77de61dd,
-	0xfadfbf04, 0x125af843, 0xdba0bef2, 0x5d8e9259, 0xa31ef441, 0xc67d1377,
-	0xb4362bc4, 0x91dc6ba3, 0xe0bcf12b, 0x12d2cfe7, 0x138c9b82, 0xb4dff084,
-	0xc8033192, 0x6fcf124e, 0xebfc855b, 0xe7f775d6, 0x1ae928fc, 0x5c0136af,
-	0xef07f5c9, 0xeb769cbf, 0x024ff42a, 0xaa73d05d, 0xadd603eb, 0x4d66c7e5,
-	0x7f86947d, 0xfc91ff05, 0x70007d40, 0x16f941ca, 0x08e8c87f, 0x044f93a0,
-	0x7c894e9c, 0xdcd18ef2, 0xe2c8ec9e, 0x3c6977e5, 0xa099f52e, 0x9e9253cb,
-	0x90e002a2, 0xf43f4416, 0xf60221f7, 0x29ba704d, 0xbdf3f25e, 0xbfc0c525,
-	0xfcfe761d, 0x66fed67f, 0x5fcd3795, 0xcff78ed7, 0x2096f7b5, 0xf7c7ba5c,
-	0x768fda2e, 0x6e024dc4, 0x67bdaddf, 0xc08077bf, 0xbbffa273, 0xf41f40ab,
-	0xa46a9e3d, 0x3e94250f, 0x2fa50d5e, 0xfa7de6af, 0xbd3d043b, 0x7950b7ff,
-	0xcfbcd2e0, 0x17107bf0, 0x5bc0beff, 0xe3af06b1, 0xa31d7835, 0xbaca97a9,
-	0x4afe482f, 0xe3be5cb9, 0xe312fbe1, 0xd0a9afd1, 0x3d3f2475, 0x3cf4483f,
-	0x77e926d7, 0x4fd5c115, 0x47ed0fcf, 0x2cdc9dfa, 0xf491b5e9, 0xc39424cf,
-	0x29f5fc23, 0xfea88728, 0xc5c60970, 0x91eafafc, 0x6fb72855, 0x1ffd9068,
-	0x2f37fea5, 0xa6ade393, 0x8c8f12e7, 0xeefa463d, 0xafa97ca6, 0x3fb9271e,
-	0xefbf85a7, 0xfeddff4c, 0x4687e41f, 0x6ad65c0d, 0xff4d5eea, 0x6fd017d5,
-	0x2fef34cb, 0xa95f3cd2, 0xd4d1afa9, 0x2fdf821b, 0x1f10a19b, 0x38f01596,
-	0xb52f96a5, 0xef4ae1f4, 0xf5ba73b6, 0xfb2662b9, 0x26af882e, 0xb5faf3d4,
-	0x1a4b1be9, 0x75f501cc, 0x5f384a9b, 0xf7016cc0, 0x7ae6419f, 0x4307a055,
-	0x20b3720f, 0xd9b907bd, 0xf9efab4f, 0xafe07ff3, 0x0a371429, 0xab764bb2,
-	0x5536f5c1, 0x75bbdbac, 0x810182ff, 0x4be7d5f1, 0x63dd5cf0, 0x5cdbc71c,
-	0x2ed02632, 0xae25cd62, 0xfeca7d80, 0x5efbbee3, 0xeb3cf9c5, 0xd1b25cfe,
-	0x114f718c, 0x12f3b4df, 0xfa8aa5f4, 0x6ff856ba, 0x2f1e61c6, 0x5aa293c6,
-	0x080fe673, 0xee6b27d8, 0xbb6cfb83, 0xb7dfe55b, 0x00fc07ab, 0x8398ca9c,
-	0x33a750f2, 0xb6a5e517, 0xfc2cc4c5, 0xf76f782f, 0xd442eadd, 0xc61707d3,
-	0x2bd35e51, 0xb17cfce9, 0xe277a63b, 0x45b7a84c, 0xb6f246df, 0x54b1feed,
-	0xcb5d52ee, 0x2d8c6cbb, 0x894af75e, 0x1e7c72f9, 0x3bba7043, 0x2592a5fd,
-	0xa6f7ef40, 0x8f7de83b, 0x03b896dd, 0x0c07eded, 0x0e043714, 0xe7e89278,
-	0x3c60d341, 0xe92d976f, 0xf2b1714f, 0xc38d26c7, 0xf7e5a47b, 0xd25e2819,
-	0x9f91b3a9, 0x58c0f3c8, 0xb19a93ca, 0xabde944c, 0xdfe57ca9, 0x7bc7ac7f,
-	0x14eb5da6, 0x55cd4efa, 0x6dff375f, 0x1b2bd410, 0xc67ee9b2, 0x9474e7cb,
-	0x9ae9fe17, 0x53cc3ebe, 0x47591c3e, 0x9fd0a5f9, 0x9e56bbee, 0xc92fec77,
-	0x0daafec7, 0x428e3853, 0x47cfda3b, 0xe14fa857, 0xab32ce3d, 0xbbf30a25,
-	0xc8c77e8f, 0x3ef473af, 0xe6ef7d13, 0xd6e7b353, 0x8f74f135, 0x767d2d09,
-	0x15587154, 0xf4dac380, 0x29c925fd, 0xf8126ed8, 0x032d6fdc, 0x75d32f3e,
-	0x93e90fd3, 0x5f5e588a, 0x92cdeebb, 0xa38fb04d, 0x7ca5f44f, 0xd70c84b1,
-	0xd78074ba, 0x93d70ce1, 0xd9fb8a54, 0xc79bfcaf, 0x593a5f25, 0xb5f4889e,
-	0xcbf5d059, 0x0313cae7, 0xc5416eff, 0xc1d13d29, 0x02c7462b, 0x5469eefa,
-	0x6ce782ba, 0xf43883a0, 0xe710cf9b, 0x85e7a016, 0x57d8c35b, 0x3db9d34b,
-	0x84dbf6d6, 0xba208e51, 0x29e498fe, 0xfea0379d, 0xa447fa62, 0x16988ee7,
-	0x77752e62, 0x1ddb243e, 0x34327049, 0x3322fa45, 0x1aea7fd1, 0x4ff3a2e7,
-	0x96c99f73, 0xfd143e00, 0xfcf2f13f, 0x3fa04fdf, 0xf13efb9e, 0x604b3ffe,
-	0xaff6433c, 0x68bc5ab4, 0x58b31c5c, 0x838f88f4, 0x3147c5fa, 0x9d62ad3f,
-	0xc540f481, 0x5d4584ba, 0x6e807f28, 0xdda6bfd0, 0xc0c32997, 0xc63d18fd,
-	0x192f3f57, 0x5e781693, 0xbbf24139, 0x377cbe27, 0xc6c944fd, 0x65f33d01,
-	0xa7cb8da5, 0xf7f8eb71, 0x58872b75, 0x7bbf74f4, 0xe89babdd, 0xc8bcf01e,
-	0x5157bc5c, 0xf844ceb9, 0xbc58b4ea, 0xbef12bb6, 0x0b1f4581, 0xae74a1e5,
-	0x0e19f54f, 0xca9147c2, 0x54b911f4, 0x190a3dd2, 0xf0b13c3f, 0x1d31c7d1,
-	0xbbe673f3, 0xefc0187e, 0xe9d38b8c, 0xf92a6d99, 0xc4f1b51f, 0x1ab7d7ea,
-	0x888fd90b, 0x4710f627, 0xe29d62ac, 0xe3e1e2bb, 0xe238da89, 0xbdc5d2bf,
-	0xa238eeb3, 0x5187be81, 0x4588e229, 0x7f5a156b, 0xbdfe42e5, 0xee38a292,
-	0x18b23e3f, 0xed2fa0e8, 0xc5cb6bdf, 0x7fae693c, 0x8be2992a, 0x5eaf5f80,
-	0x99fc8f3b, 0x5e1ce975, 0xb03be265, 0x199d2387, 0x58afde78, 0xae704917,
-	0x07f6727c, 0x7de3e44f, 0x81f189c0, 0xa09b6be7, 0xe19f180f, 0xce39683d,
-	0xd0f725b1, 0xd68b6777, 0xf31939c3, 0x73d963b4, 0xde226537, 0xde303252,
-	0x2e55fb29, 0xef0fbbbd, 0xd86ce707, 0x950ad977, 0xbb6b0f7f, 0xf021f489,
-	0xb80b327c, 0xd9633e2f, 0xd72346eb, 0xa8792c67, 0xfe1db3b0, 0xc29f6cfb,
-	0x4104fc73, 0x26b7b8ad, 0x5bef27e1, 0xf7f8e995, 0x0a754b36, 0x8902c3dd,
-	0x7e97f746, 0xa3fdc191, 0xcedc1979, 0xd270cb2d, 0x55ea9e3d, 0x4cd2e726,
-	0xbdf74e3e, 0x55e73875, 0x282a3aeb, 0x1317f9ae, 0x976a57f9, 0xad22ba45,
-	0xf9e31f3c, 0xad779401, 0xaa3c0237, 0xfc6e5c1c, 0xad63d042, 0x94d5d263,
-	0x0767ae9f, 0x5607eff0, 0xac9cb85b, 0x9bb8058e, 0x86e90139, 0x1939f7e2,
-	0xb8e253e5, 0xe6028329, 0x8c3b4457, 0xc7fab0e3, 0x0d63abdd, 0xfec1a7e8,
-	0x38420f97, 0x237f5dc6, 0x9559efae, 0xb4801af8, 0xbfed00aa, 0x3c3cd567,
-	0xd8ad9777, 0xf0e50e3d, 0xf1832ddc, 0x7b2b0546, 0x23d25dee, 0x3bfe0573,
-	0x395a3e45, 0x81bbf1d4, 0xb9706437, 0xdfb951e9, 0x2f0106e8, 0x79f20749,
-	0xf7030af5, 0x47bc83e3, 0xe4bd5301, 0xdab71a43, 0x728891d2, 0x81bb7ab8,
-	0x8cdf87ee, 0x973806eb, 0x751f492f, 0xdcaae800, 0x51df4310, 0x344ef2ad,
-	0x51aabd62, 0xbdffbaa1, 0xd3a40c84, 0x60bd962f, 0x1c39fa45, 0xfa839ad9,
-	0xa45e6ba9, 0xda29ee93, 0x8beedfb8, 0xaf743965, 0xc3ad8669, 0x9965df82,
-	0x8edb20b1, 0xada0fc72, 0x0fcf88d5, 0xb0ea6736, 0x46d9b2ee, 0xbfa5dd61,
-	0x885fea92, 0x41fa177c, 0x9e3852ba, 0x1b769aab, 0xdd2feff1, 0xd4e2e82b,
-	0x41f6efb3, 0x4675503f, 0x2fd41f47, 0x527d0740, 0x28cfce11, 0x9a6b9fa4,
-	0xa4bc1e78, 0x03a41a83, 0x8239bbe0, 0xbdb66a0e, 0x43f21770, 0x373fe20d,
-	0x9e808e94, 0xf9fda9db, 0x7f18e30d, 0x44e91dbf, 0x2fa833ea, 0xce3fa033,
-	0x058bebc8, 0x0c7da1fe, 0xe00ef76f, 0xf9dd75f9, 0xd07c4108, 0x66d77e13,
-	0x4c3e04e8, 0x8ad77724, 0xd8ae76fd, 0x9dfc456e, 0x1ef7767a, 0x3f54b78c,
-	0x11dada0f, 0x3c041f86, 0x56ff716a, 0x19d93f5a, 0xab5fb8b5, 0x74ddff7f,
-	0x96b0f82f, 0xfdc9fdf1, 0xfec5ead6, 0xfef173e5, 0x2acfb13a, 0xadb5e026,
-	0xc13be72f, 0xf4c7c867, 0x3fb121dd, 0xbbf83d8f, 0xfec5bbba, 0x6cc9449a,
-	0x0f8456cd, 0x0fe517e2, 0x28cb8fd0, 0x397409e5, 0xe50365b5, 0xc97c4bf7,
-	0xd7efbff5, 0x93fc2e2b, 0x9d8f1254, 0xb6f77c3d, 0xa1c9f045, 0x763292fb,
-	0xd8befc00, 0x240d9f4c, 0xcc07d57a, 0xce46e927, 0x49a7f457, 0x61bee2d7,
-	0x5f1c56fc, 0x1bd07bce, 0x0e71c7ad, 0x721fce32, 0x8b2f92fd, 0x3b5da7ea,
-	0x4efd8ad8, 0x5ed1b259, 0x3f7c7811, 0xbbef46c3, 0xf7806ed0, 0xf2143b5d,
-	0xe7121f5f, 0xbdf743fd, 0xe01f2d60, 0xc577f7a7, 0xe19d25ba, 0xe4c9fa0f,
-	0xb9daf77a, 0x6ebb583f, 0xbae48729, 0xe1bfee8b, 0xeb976c5a, 0x2051f8c7,
-	0x4a384a9d, 0xfaf7957a, 0x344b74b4, 0xdaaaf527, 0xa6d77d33, 0x9dfca21d,
-	0x78ed7690, 0x2c3a3ec2, 0x9ebbcdf2, 0xe77df956, 0x41edc965, 0x33188ef7,
-	0x259fea07, 0x15b6aef3, 0x49b73c62, 0x521e7ba1, 0x4acfc0af, 0x923e807d,
-	0xdef0c1f6, 0x36a57f3c, 0xf10275de, 0x63bc7559, 0x44927e1c, 0x7d57a5da,
-	0xa0c6aadd, 0xcf1b6aff, 0x53749383, 0xf89db275, 0x93dc5aa1, 0xeef15b2a,
-	0xf74861c4, 0xce281b4f, 0x58df7653, 0xb3fbda23, 0x8a1f4d37, 0x127bc0e0,
-	0x6c4fdf28, 0xe047921c, 0xebc4b661, 0xc6c4bef1, 0xbfc7af47, 0x87633a5f,
-	0xc1a1df4a, 0xcb8f9071, 0x7f23c8ee, 0xcec8e1eb, 0xaed02389, 0x436ab5ff,
-	0xa6e47ebb, 0xffb08b21, 0x58ef4b48, 0xc6d078fa, 0xf4bbaa38, 0xa427a431,
-	0x03f32c1d, 0x90bdc5eb, 0xaf9cdeec, 0x8a97757a, 0xefac0bc8, 0xaef9f183,
-	0xddf4910d, 0xa3a352a8, 0xdbe715b9, 0x8ee74499, 0x2526385a, 0x2b9ee9db,
-	0x8cb369d9, 0x9725222c, 0x453023da, 0xc74375f9, 0x5e4fa81d, 0x1832c3bf,
-	0xd4cb8bbf, 0xb9cb43f3, 0x90e3cd7d, 0x61dfc171, 0xeac8eb92, 0x3b57e9cd,
-	0x2f7f7c9e, 0x74ec2b9e, 0x3fde919f, 0xebe9ecb1, 0xd89e1f51, 0x7dc7639c,
-	0x4919db1f, 0x198e0bf7, 0x78e7bf82, 0xb4c2f7a9, 0x3de4a9f7, 0xc1defcd7,
-	0xfba49cf6, 0xb9cbde0b, 0x98f2d2ec, 0x74662e4e, 0x065cfc4f, 0xe8e4fee3,
-	0x7e62b6ef, 0xc9a34561, 0x8e64f786, 0x7c63fd20, 0xdf4abb6b, 0xdfbba201,
-	0xdb23af80, 0x703ee8f3, 0x5ebcc7c5, 0xf0f8acd1, 0xc3fb72fe, 0xc2fe53f7,
-	0xf137b04c, 0x3db7796a, 0xebe1fabd, 0x38ce0d91, 0x3bf1cb3d, 0xf3366700,
-	0xef908b7c, 0x75bebc3a, 0xffe38a4f, 0xfd2cfdbf, 0x077bd313, 0xf09347df,
-	0x57aae796, 0x720a2e80, 0x72fbf0fd, 0x9fb22cf1, 0x50f62e4f, 0xb4395a79,
-	0xb3d2246a, 0x15ee8625, 0x51e3b4bc, 0x5373bf15, 0x79f06dbd, 0x308f1f3c,
-	0x9ff7d0c7, 0x90bc5cbe, 0x17279a82, 0x8a3f89d7, 0x15f854b6, 0xb55e547c,
-	0xfbde8dad, 0x0b5e4772, 0xd97debde, 0x9ac5c31c, 0x3be820ab, 0x3dbf1299,
-	0xfb9657dd, 0x1cd7fcfa, 0x9fdd72cf, 0xc56e9e6f, 0x21fdb57d, 0xe23865ae,
-	0x86c63a37, 0xc8a56076, 0x86ba392f, 0x23c7d9db, 0x18abfe62, 0xed7c7cf0,
-	0x0efc4494, 0xa9b6ccd1, 0xc57b63d7, 0xe786c54e, 0x49cee703, 0x7dcf3c56,
-	0xe2b4efa6, 0xd6cfaa3d, 0x3e57fbc8, 0x237bbbfa, 0xd829b3c6, 0x9eab447f,
-	0x84293239, 0xfc32f44c, 0xcbee9ea4, 0xe4ed017e, 0x451f393f, 0x89f813fe,
-	0x99927cc3, 0x4bbf722f, 0x9c57f9f7, 0x7d8a46ff, 0xcbb6f7b7, 0x17b506f8,
-	0x63f6f015, 0xd096b76b, 0x68de4fdf, 0xbfbae1b0, 0xf1a068dc, 0x4db9c0e7,
-	0xbe3deb07, 0xb0839f99, 0x13e8e78e, 0x6779f99b, 0xef3f334e, 0xb833cf54,
-	0x60d2fdf8, 0xe80a2cba, 0xeb2ddf47, 0x7323bbe1, 0x737f7c5c, 0x7ee27f40,
-	0xb1bf442f, 0x9fee99ac, 0xa93e6a5d, 0xaaff7e96, 0x74dd1791, 0x08bd13db,
-	0x23ff22b8, 0x98ba4add, 0xf5c786b3, 0x0b83cded, 0x9d24fe91, 0x5803bf68,
-	0x3bfc646f, 0xfa28bab2, 0xb324f7ee, 0x62fa80c3, 0x18e77c4a, 0x075f4f04,
-	0x916aaf97, 0xe4f785ce, 0xec29bd58, 0x15dec477, 0xbc1a78f2, 0x7abbf74b,
-	0xcff7f8db, 0x59317dc4, 0x474abe82, 0xda293e7d, 0xba038dfe, 0xf2ffae74,
-	0xf5d03d3a, 0x3bf691a4, 0xd7809db2, 0x7af35ff5, 0x167b7d9e, 0x7def3fd4,
-	0xec3d3af6, 0xf695d26f, 0x2fa80621, 0x75cdf259, 0xc9b9e063, 0x3bd83ae1,
-	0x9b139e60, 0x7f71d292, 0xdb087ed0, 0x8e7a27a7, 0xee2b5960, 0xba569d8f,
-	0xf4cc2d06, 0xa77b7ff7, 0x0e4be0e5, 0xc0d3bd7f, 0xa73bbbe8, 0x87f5cb7b,
-	0xd70e9d2f, 0xa109dea9, 0xdd8ce5ed, 0x5e7cf947, 0x7e076f7e, 0x788911dc,
-	0x5dd38aaf, 0xd3c7bcb9, 0xe3c7b9a0, 0xe4d5f7e4, 0x7f792afd, 0xfdff72ea,
-	0x7297b5b3, 0x00ffecff, 0x4fb2f369, 0x00008000, 0x00088b1f, 0x00000000,
-	0x7de5ff00, 0x5554740b, 0x55b9e896, 0x2a493eb7, 0x54842549, 0xaa84a925,
-	0xc0902b7c, 0x310c7c25, 0x0403e548, 0x6a285888, 0xa205a0d4, 0x01148280,
-	0x55f4741d, 0x9a7c3061, 0x179f8ee9, 0x102d4622, 0xdd787195, 0x866db1d1,
-	0x3220538f, 0xb40e9afc, 0xd38ceb63, 0x68d1d01d, 0x38311b63, 0x6f360cf4,
-	0x4dce7def, 0x802a56ea, 0x6f7be7be, 0xf65e97ad, 0xee739f61, 0xffb3ecf9,
-	0x5f5bdf67, 0xa5eb2c19, 0x0f24c664, 0xa153ab63, 0x63595a74, 0xff7b9419,
-	0x68d2cfe9, 0xac839ac6, 0xc18f2e3b, 0xd3f5a35f, 0x7ccf5051, 0x2e504bba,
-	0xcd1a484b, 0x139960c6, 0x996fd062, 0x12aeb189, 0x6d3b26e8, 0x12d8c2cc,
-	0x019dfe09, 0x19caf9ff, 0x956c674b, 0x44edfe15, 0xf08742b8, 0x7f466683,
-	0x3f98059f, 0x1fd8c0df, 0x3925744f, 0x9d9d8cf5, 0xbb0c2e1d, 0xbc65fb18,
-	0x009ce6cf, 0x8ecd1ded, 0xbec634a6, 0xd4a4c37c, 0xd09eff43, 0x60f927df,
-	0xe67aa5fc, 0x6d9284ef, 0x24d8ce1f, 0xc3ea2f28, 0x61dfa053, 0x8db6f157,
-	0xa9cbbcf0, 0x3f9e0c63, 0xfce70aeb, 0x82c678f5, 0x32f2932e, 0x32777ea3,
-	0x9f1eeb80, 0x9dfb1c3e, 0xfe5d7d7d, 0x936eb03d, 0xec1258cc, 0x598c067b,
-	0x0030780e, 0x07c32fac, 0xb40e3442, 0xbea09307, 0x0e74f5c5, 0x2f307c23,
-	0x0dd8c89b, 0x06ebef8c, 0xf11fbc39, 0x196494c5, 0x6f9b37f7, 0x3283db0f,
-	0x3333a38c, 0x98bbae03, 0x4d3f5875, 0x8eb19800, 0x7f60c34b, 0x3263c066,
-	0x24c78096, 0xa1eaa6c6, 0xe9afac13, 0x0990fa97, 0x7884d7d6, 0x85d07014,
-	0xd72c7a23, 0xc58bf8c3, 0xbc8ecbbc, 0x58c1c46b, 0xeb07fe10, 0x5de62259,
-	0x3d7771dc, 0x9092cb9e, 0xc0b74ce1, 0x7ffa25f5, 0x72c79d0f, 0xf2feefd1,
-	0xe29c46ad, 0x7eda1dfe, 0xafa6d9cb, 0x52fcf0f5, 0xfdc46dd6, 0x6a8ceb2e,
-	0x0cf9a8ef, 0x977cbbd7, 0x99debeb6, 0xc2748698, 0x97b1b2c6, 0xe74d54f4,
-	0x99f448bd, 0xca746faa, 0x66e19fb8, 0x371304c5, 0xf4479f3d, 0xb00cdec2,
-	0x63ac7ec8, 0x8b4fd118, 0xb1e74f4b, 0x9cc49764, 0x7ebb18e3, 0x42731657,
-	0x61aefd53, 0xc85d2654, 0x5fcffaa0, 0x57de3639, 0xd75e7032, 0xc6ab6abf,
-	0x6aff5df5, 0x3aea9511, 0x4e1d049a, 0x867497d5, 0x2ce71d61, 0x9b800eb0,
-	0x8162c08e, 0xd66e9a7e, 0x99e11887, 0x57bfb199, 0x596bc72c, 0x424fa5df,
-	0xfd8a0e58, 0x3a24974a, 0x1f3c6484, 0x433d61ef, 0x031e627a, 0x79993bb5,
-	0xa05ca5cd, 0x398ebb1b, 0x24dfe063, 0x19ce2fce, 0x81ee9ccf, 0xfc583976,
-	0x87584ab3, 0x0941ae61, 0x5c737b41, 0x33e436d2, 0xe574f416, 0xe20d73c3,
-	0x4e38aeb9, 0x54ee0937, 0x1d2af3cd, 0xadfa2adc, 0x18769a4b, 0xb3c1b2e9,
-	0x5121e888, 0xc7acd4c9, 0x406a5fa4, 0x67d5b9fa, 0x623ba4f8, 0x585fa21c,
-	0x295e0dc7, 0x7378fc84, 0x50ddb683, 0x44ad75f9, 0x8e47d425, 0xfbf6d5e7,
-	0xd003d229, 0x717e103b, 0x9c0c3d24, 0xc3a3c583, 0x1224f073, 0xb9cccbbd,
-	0x5be012b9, 0xee181b0e, 0xf7cf14df, 0x97310e79, 0x0f80fd86, 0x8875e260,
-	0x2e4fa817, 0xc537e2d7, 0xb0e7c5a3, 0x867e2d3a, 0xb7fbb57b, 0xda6ae435,
-	0x35237c33, 0xcb8b59ed, 0xbfb67034, 0xc47fd342, 0xec0d6aea, 0xf4d4ce0a,
-	0xa37f5bcf, 0xbd682e06, 0xa8bfd35d, 0xbda6817d, 0xa69f7438, 0x268ed47d,
-	0xf9da5c0d, 0x98ffa688, 0xda6b8f5d, 0x6a3786c7, 0x7e1dc7da, 0xe84f034a,
-	0x7fe9a2da, 0x34db07cd, 0x5fba93ed, 0xdb5fb4d3, 0x9e0686f3, 0xd35bbbdc,
-	0x0385ca7f, 0x1d8ab81a, 0x31aff4d3, 0x4f0356ff, 0xa6abfeb5, 0xc7fb74ff,
-	0xce19f69a, 0x67da6a3f, 0xd2d1bfb9, 0x93973c6b, 0xa5ff2bd7, 0x9359ee79,
-	0x5f50dfef, 0xdd954b34, 0xebf48641, 0x35ba3e24, 0x0184a74d, 0x972a83fe,
-	0x1c9e1d04, 0xc1392561, 0xb78e59f2, 0x32b0e914, 0x6e7c7c8c, 0xe0f24497,
-	0x28bd28ab, 0x91ebd1ff, 0x4afd9da0, 0x22765e52, 0xc45d41dd, 0x331e29fc,
-	0x39d62393, 0x81aaceac, 0x9aed7b87, 0xa706b6fe, 0xe7c33da6, 0x2d67b4d6,
-	0xb6703456, 0x7fd35cbf, 0x068f6ac4, 0x34eb0576, 0x7bd6f3fd, 0x6b417035,
-	0x517fa683, 0x5ed34fbb, 0x69ac5a1c, 0xafc3b51f, 0x573b4b81, 0xd98ffa6b,
-	0x8fb4d415, 0xb4d7af0d, 0xaadc3b8f, 0xb5742781, 0xf35ffa6b, 0x3ed34841,
-	0xa6877ba9, 0x4e9edafd, 0x77b93c0d, 0x94ffa697, 0x5c0d610b, 0xfa688ec5,
-	0x6a4f98d7, 0x0fd6a9e0, 0xdba7fd35, 0x67da6b4f, 0xb4d73f38, 0x2cd076ab,
-	0x7adad7f7, 0xaf5d1761, 0x7cf359fc, 0x90c3dab0, 0x486f823e, 0xd613b34a,
-	0x3fe102eb, 0x777ce49c, 0x28ed1e9c, 0x8c14182f, 0x41ad2901, 0x420c92fd,
-	0x480ae90c, 0xe2a6358c, 0x20ac4028, 0xc15549b7, 0x4f68c9f3, 0x73aa9000,
-	0x1fa0fcb9, 0xeb5ad813, 0x1bb266a7, 0xdf40971c, 0x29bfc25d, 0xa0944b83,
-	0x85ebaa9f, 0x4ea166f9, 0x726f3a02, 0x582e3cf9, 0xaf9d7dcf, 0x6862cb4f,
-	0x705b0427, 0x9307a01d, 0x9e6f41bb, 0x79776388, 0x378f064b, 0x89780cc3,
-	0x5c48ef98, 0x32cca3ab, 0xcc33fcf4, 0xff7fa967, 0xae3e06b8, 0x8a6bfb04,
-	0xa0a7ff18, 0xfbb065ee, 0x37c0035a, 0x153d8c05, 0x4cfc12b0, 0x5b704ec0,
-	0x7b6549c0, 0x96e54dc0, 0x1ded4280, 0x5f827281, 0x0e087808, 0xdca8ea05,
-	0xfd52f016, 0xc10340f6, 0x547c04af, 0xa62c08ee, 0x9f80b5f2, 0x560677da,
-	0x40f3fc13, 0xc0ceca90, 0x237faa7a, 0x9bf04ad0, 0xdf827681, 0xdca8840a,
-	0xe541d815, 0xb52740ee, 0x22ec0def, 0x9840edf8, 0x30e070e0, 0x5d0207c1,
-	0x7c0c1f04, 0x40a1f040, 0x03879537, 0x0d1e543d, 0xf1fb52f4, 0x078205c0,
-	0x576b4bce, 0x2e576133, 0xd2c07412, 0x2f793db8, 0x85f6523f, 0xbb462d8e,
-	0x43a09177, 0x87983543, 0xcc867740, 0x2ecd6dc2, 0x13a06a3c, 0x71c9d137,
-	0x96af2fb4, 0x4070d04e, 0x33560d7a, 0x5a9bd237, 0xc9e954b6, 0x90ae0cfe,
-	0xbb732f42, 0x336feb88, 0xb537f553, 0x85283e37, 0x079b9ed0, 0xf811b276,
-	0x9f6123e6, 0xe5c7147c, 0xc1bf39f5, 0xa35f768d, 0x66c0af14, 0xb277fe01,
-	0x8c2fe03b, 0x5ed77fa4, 0x9fb456d3, 0xc235f5d4, 0xe7183a38, 0x5a2eecbf,
-	0x6c3b2357, 0xbd40f5c0, 0x72fc0f47, 0xe2dbe6c6, 0x2fbeba02, 0x2234175b,
-	0x85425913, 0x8cc644de, 0x48f3df76, 0xf7fce7e7, 0x17c1c21c, 0x9c429559,
-	0x78537ae7, 0x7f30adf8, 0xb2bd11ef, 0x5e3439cd, 0x00ceb796, 0xf6997de1,
-	0xa0773fb7, 0x17f75f1d, 0xe1cf0fbd, 0x21b12184, 0xe9dd7404, 0x3acf8892,
-	0xd94d3a5d, 0x02fdf766, 0xa26df9d7, 0xa01d4eff, 0x56ebdbf2, 0xb612b2bc,
-	0x20a2b8d4, 0xf055ed19, 0x5f680c0f, 0x034e61cf, 0x989b87ca, 0xea1c5de7,
-	0xf823e666, 0x52a41656, 0xe176f9b6, 0x21636ebe, 0xa6157d82, 0x8afb589c,
-	0x383bd75e, 0x752c70d8, 0xdd90f29a, 0xfbc70077, 0xeb43d136, 0x7a69313a,
-	0x5d4bee21, 0x49c33997, 0xdeb366fd, 0xdf7d7017, 0x53fafbee, 0x9d306f29,
-	0x61f488fc, 0x3fb06981, 0x3779c233, 0x38e0ef03, 0x214b0fcd, 0x3e9573a4,
-	0xa74cc11a, 0x7a851ff1, 0x805e9229, 0x4b7fd04e, 0x9399cdeb, 0x4dd2f448,
-	0x3e926ff2, 0xfa7b0468, 0x28542e84, 0x8c4e89e9, 0x5173ac12, 0xee49d01a,
-	0xc0f0f4d0, 0xe423287a, 0x17d9d020, 0xfe9fde38, 0xe2371ae1, 0x93dbf96d,
-	0x66b7889c, 0xd0079c1d, 0x9ea8f073, 0x442604ec, 0xd2dafebb, 0xb207f910,
-	0xc529cca2, 0x7172e373, 0x7ead9ebf, 0x4ddc863d, 0x74f4e5c8, 0x0ba86ec2,
-	0xef9cb8d1, 0x2e7d76d5, 0x2e7d473f, 0x15a6df3f, 0xc3d52d9f, 0xf81c4ffa,
-	0x8d2ce8dc, 0x3fd58fb1, 0x823f2879, 0x3aef97ae, 0x7e83cd3d, 0xb92eeb17,
-	0xbea07131, 0xd2abcc50, 0xe898de91, 0x5c896adb, 0xc75d3f57, 0xa75d22e7,
-	0x11e75d00, 0x768a7f5d, 0x33936cf9, 0xbb2856f9, 0x28613501, 0xc95a2f7d,
-	0x14c05c7f, 0x2f32172a, 0x0c808b95, 0xc1bd8e90, 0xf7888d27, 0xd52758fb,
-	0x777e503f, 0xbdf5d23a, 0xd9f91f3a, 0xd517594b, 0xb5bd672f, 0xaf37b478,
-	0x1daef35f, 0xeb537d56, 0x44915393, 0x7fcd0c6f, 0xdb39cb17, 0x4e834fa5,
-	0x5cec93e2, 0xe4b747c0, 0xe613227f, 0xd5677dbf, 0x3f505913, 0x85cfcf5b,
-	0xa2e7e31d, 0x7de891ca, 0xe0145f03, 0x78a6dff3, 0xa4fa5f68, 0x345f0d3a,
-	0x123cce3e, 0xcfbbd38c, 0x8ae6da14, 0xfbf293e0, 0xf28590ff, 0x13bdee4c,
-	0xdbf97bcf, 0xef3c54a6, 0xfbd718fb, 0xaf8d4792, 0x119efaa8, 0xe2cfdfbd,
-	0x85f7ec15, 0xb22fefa0, 0x17f7d119, 0x658a3812, 0xcb287603, 0xf2cbd9f1,
-	0x72f6f406, 0x88d1cedd, 0x95ebd027, 0x7df70e78, 0xd632d9dc, 0x9420fa85,
-	0xe1887683, 0xecd29335, 0x7617e8d2, 0x8d850129, 0x7f3e219f, 0x198ee38a,
-	0xfca92ebc, 0xeed19fd0, 0xd0591930, 0xce7c465c, 0x677f2226, 0x9abf891a,
-	0x3879b511, 0xb7e9d78f, 0x84ff1e0c, 0xefe1ef58, 0x841d3fb8, 0xc52cbcfd,
-	0x2feb879a, 0x3cc0fc53, 0x19d24724, 0x2e4773cd, 0x3e7563e7, 0xa076e966,
-	0xc1347e9d, 0x8f9e3b77, 0xfd52471a, 0xcfaec3c8, 0x667cf1f2, 0xe5506c57,
-	0xaec78d33, 0x84e972e3, 0xf84419c1, 0x014b9544, 0x6f2fd609, 0xa7ff286f,
-	0x371d700f, 0x8c612d98, 0xc34ab077, 0x35ff7ed9, 0xdf1f4077, 0xcae3eaa0,
-	0x1a8ef8a8, 0x018a61f7, 0x3ecc57d7, 0xf141f152, 0x0e4e551d, 0xb1b0bfd2,
-	0x889fc42e, 0x79c7f597, 0xce3fb9fe, 0x8d79c3a3, 0xe6328e42, 0xf8237b77,
-	0xae00d6d4, 0x307fc68b, 0xff8d7cb3, 0xd9c0d560, 0xffa6bb7e, 0x4d4ed588,
-	0xd6e82bbb, 0x57ade7b4, 0x6b417034, 0x517fa6b9, 0x170347bb, 0xfd34ea87,
-	0x6af0ed47, 0x06ced2e0, 0xbb31ff4d, 0xb1f69a7c, 0xf69ac5e1, 0x1afd8771,
-	0x6ad74278, 0x3e6bff4d, 0x27da6a08, 0xb4d7af75, 0xaad3db5f, 0xb6f72781,
-	0xb94ffa6b, 0x57b4d210, 0xb4d5bfb1, 0xd75f98d7, 0xf1c62fc0, 0xeb54e778,
-	0x9b9e683f, 0x81afdf6e, 0xf1e7885f, 0x23ce199a, 0xf9c5e7da, 0x278b6f06,
-	0x3ee5987e, 0xffdf69a9, 0x8dcdc8c8, 0x47a12fc0, 0xb67fe474, 0xc53d71d5,
-	0x1d39aa1a, 0xd7bef1c4, 0xe66a1f2b, 0xbaf7d1cb, 0x7a9d8e90, 0x75f2266b,
-	0x039cf97e, 0xd0ac7640, 0xc51aa2b3, 0xc9eebb9d, 0xf48e5803, 0x6c8d5ebe,
-	0xf270d253, 0x7da39600, 0x1903575f, 0xca716533, 0xf996583b, 0x70d8d6c7,
-	0xbce7ab89, 0xe0c4e583, 0xb3941a8a, 0xb17e2660, 0x3e7dd608, 0x846d9238,
-	0xaa652575, 0xd10f5e71, 0x1d0caaed, 0xdbaaf9f1, 0x4b37142c, 0xa322d6bf,
-	0xe81cdf3e, 0xec10791a, 0xd3a7f4dc, 0x69dc62d7, 0xa1f9d83d, 0xc017b022,
-	0x59f2c7ee, 0xe043ebb0, 0xbb046d1c, 0x604dcb1f, 0x73fd63f7, 0x9c23f760,
-	0x7ad974fe, 0xc9d56e7c, 0x6172ea7b, 0xca0f11fc, 0xd7533456, 0x0e2b7539,
-	0x0fec7ac0, 0x4b28ad1a, 0xe267ae8c, 0xec8eb09c, 0x0a8eb065, 0x51078b42,
-	0x3052ecfd, 0x1c39321c, 0x2becfd07, 0x1db81a74, 0x2eb045ff, 0x97cf8b58,
-	0xaedee93e, 0xb6f9f630, 0x8a1937b3, 0x5d799f61, 0x014d6db7, 0xe6799738,
-	0xf1d3be02, 0x93fc602c, 0x09cd8f79, 0x97860c96, 0x48ff7a14, 0x2cee4972,
-	0x16b53e46, 0xeb81947d, 0x85fd50da, 0x3ce2b3a2, 0x0839cc8f, 0x787e7eeb,
-	0x23e758bc, 0xaff2aa73, 0x79cf5c66, 0xef50ef94, 0x47218cef, 0xffe853fe,
-	0x2f5c7993, 0xe5159fc3, 0x08938d93, 0x949d81b3, 0xf376f20c, 0xd1a7d5a4,
-	0x41ad90a7, 0xbb23e509, 0x144fcf08, 0x7823c828, 0x1e44fc4a, 0x537947b2,
-	0xe733e454, 0x1f3678c1, 0xf1914ed8, 0x785ac5b1, 0x19e79c33, 0x0c7ac0c3,
-	0x3282e977, 0x92f0c1ec, 0x9e605157, 0x5fb0798e, 0xb51b3780, 0x8e9165fe,
-	0x9f717d91, 0x378beeba, 0xdda76829, 0xf0f5c797, 0xecbb8096, 0x7ffa0313,
-	0x4027d94a, 0xfd8b9947, 0xabe40f92, 0x04abd1ad, 0xd2e19fa1, 0x2237efdf,
-	0x3ac5df61, 0xfd639f51, 0x27bb089a, 0xb86b8c47, 0x19bc27a4, 0x6a4abd9a,
-	0xbd06fcc4, 0x618cefe4, 0xc9e69577, 0x4666b9fc, 0x1e7786ed, 0x5f309c96,
-	0xba486366, 0x4bf1c687, 0xc2dbd40a, 0xb1ab3ebc, 0xf0085a53, 0x3a4e791d,
-	0xac9c7507, 0x08feb0c5, 0xa0e5d93c, 0xede78564, 0xc425068f, 0x55eadd83,
-	0xdae22258, 0x52bdfc4b, 0xf57db4f0, 0x864fb2c4, 0x8abdbae1, 0xa59be717,
-	0xcadf9bf2, 0x2b1f3d70, 0xbd42a9bf, 0xc33d1bf6, 0x9c6f8cfb, 0x8c5a724a,
-	0xa9a5a87d, 0x973ccf5b, 0x729267f1, 0x9e93f11e, 0x2ce2ddbc, 0xf17dfe00,
-	0xd6c34b36, 0x47767418, 0x75b3a71e, 0xe2deaa99, 0x73d749eb, 0xeafaa93c,
-	0x1fa72b1b, 0x4cad6e55, 0xce3ab0e1, 0x24f1ecca, 0x8f5a8637, 0xf98e3dad,
-	0x19bbd622, 0xfde2b1e6, 0xac2b77cc, 0x21f03788, 0xcc9f34bc, 0xe7d6e9e5,
-	0x4637e4dd, 0x3e20cfd3, 0x5c9bd100, 0x1dd97486, 0x31ba066a, 0x682a33cd,
-	0x5bfeda2f, 0x2472848b, 0x284ab593, 0xb5d96d47, 0xe7d46587, 0x1bd8afb2,
-	0x12be8ec3, 0xa9e7a83f, 0xcf8325da, 0x2abbf9cf, 0x0c0d43b2, 0xe5c9b6e9,
-	0xa9f9e1b4, 0x6474da74, 0xe22faa78, 0x3a0bd73c, 0x7aad672e, 0xd60ad3e4,
-	0xeb256549, 0xd63af2a2, 0x5987a54b, 0x99ab2c65, 0xf32d6542, 0xf98d3952,
-	0xad63aca9, 0x9d64ce54, 0x2eb3d654, 0xa3bfc12a, 0xe4accbd2, 0x7608de87,
-	0x9973960c, 0x985bca97, 0x482dca9f, 0xfef013df, 0xdbe095a1, 0xbb952759,
-	0x459dff80, 0x53311f18, 0x39e417b9, 0x3c836f96, 0xf20c32c7, 0xf8c269dc,
-	0x83ca9b88, 0x43ca8501, 0x0f2a7281, 0xefd43c07, 0xca8ea068, 0x952f01e3,
-	0x540d0227, 0xd47c0576, 0x316054ef, 0xfc05ef95, 0x581fbe54, 0x8107e54d,
-	0x12ff9520, 0x91654f58, 0xe20ae411, 0x163ddddb, 0x8f9c9afd, 0xe8271e8d,
-	0x84f34fa3, 0xfdd1ebff, 0x78f1e2f7, 0x83ba3a8e, 0x94aed5b1, 0x6e6d1e90,
-	0xe504279d, 0x74937746, 0x4eeb9437, 0x64d63b70, 0xd93b244b, 0x724abed6,
-	0xa4bbb8c2, 0x9c027d6e, 0x0fbcdeed, 0x4f4198e7, 0x6b65ed54, 0x7f841413,
-	0xe819a4ff, 0xdfc1ab70, 0x7fda15bb, 0xcebfd2f5, 0xaece8331, 0xc7f53c48,
-	0xed4c38d7, 0x66b20e93, 0xf207c02b, 0x26993f4e, 0x10a075f1, 0xc7d2fe3e,
-	0xe3e4d673, 0x791cb93a, 0x368e05d5, 0x5b0f19fa, 0xdb18cfc8, 0x0eac667e,
-	0x2dab49e0, 0x471fe865, 0xf5b8a3f4, 0xdba2fd50, 0x563ae7d5, 0x1e2337a4,
-	0xee0a7dd6, 0x65e51389, 0xcf8c58f7, 0xbbab8e45, 0xfe99f9ba, 0xf647f332,
-	0x5e332e93, 0x54e79151, 0x7403ffde, 0x86df4d1e, 0xaebf1f4b, 0x3598f8a3,
-	0xf6faf515, 0x7a772e14, 0xdb43e3b3, 0x53dbdd60, 0x9f21bc05, 0x610eb5f6,
-	0x8dbad7d8, 0x6fc764b9, 0x1d36f38f, 0xd1bff6c1, 0x69a0db29, 0x636fbc7b,
-	0x14f9c131, 0xea9759af, 0xca5ea377, 0xb1fae049, 0x9c48f1cd, 0xffff8233,
-	0xe6eee422, 0xadaebeca, 0xd7ad4fe8, 0x6e7802b1, 0x1b05fadb, 0x4bce30dc,
-	0x022ec09b, 0xc2f27938, 0x9ed0050d, 0x513741bb, 0xae1e642f, 0x0b4da5e3,
-	0xe128d95f, 0x0b5323b8, 0x213cdc61, 0x7586733f, 0x74095d8f, 0xc6d466de,
-	0x63f5fa15, 0x8597e73e, 0xd019cc30, 0x5e2239bf, 0x1ac0d5b1, 0x4166f522,
-	0x35b7973e, 0x4c34bc45, 0xd33cf1e1, 0xe3d0f888, 0x11aaffb0, 0xbe93fe3c,
-	0x9ff14cd6, 0x9e7fc774, 0xe9ed0e9c, 0x4d053a1d, 0x74b6d95a, 0x9efd018d,
-	0xf22758db, 0x3f8956e3, 0x76e6cc1f, 0xb92c1832, 0x1efc2273, 0xf2ca37b0,
-	0xf6a7e223, 0x7184a086, 0x4b11aa8c, 0xa7378c25, 0x3093ee3b, 0xe0de91fe,
-	0xe8897c93, 0xfda9f927, 0x2b9f22ae, 0x6f67d61f, 0xf735e784, 0x3c0cbeb1,
-	0x81b79857, 0x566409f2, 0xecdf3916, 0x27878e22, 0xb43d2064, 0x691ad7df,
-	0x9af8d15d, 0x991eaee5, 0x1ce07c3f, 0xccbfdba3, 0xfdb8e7e7, 0xf9029871,
-	0x1f8f1260, 0x9339789c, 0x6dd9e5ec, 0x23f41ef1, 0xb2393c4f, 0x2aa7e096,
-	0x9eff683c, 0x1a62b978, 0x9a9fb396, 0x484efd49, 0x05c630ec, 0xbb753f66,
-	0x7939f58c, 0xef1c2eb0, 0x71e891b4, 0x89f753f6, 0xc5a91fe7, 0xf05d72f6,
-	0x2e9fd0ef, 0x012d7e6f, 0x891505e3, 0x7961646f, 0x6abdd742, 0x837fcc3f,
-	0xd51afd95, 0xda4377b5, 0x3fc1d4df, 0x6b993ce6, 0x378c78c0, 0xf3ce973f,
-	0xf031e626, 0xf92f077c, 0xba3b95b7, 0x8e8b01de, 0x5bd9d75d, 0x9ebad783,
-	0x5883d65d, 0x34158756, 0x61ed59a3, 0xa72c41ef, 0xd16bf975, 0xa0fba9bc,
-	0xdd9620f5, 0xc45e7d23, 0xedffabff, 0x055e3796, 0xab63c478, 0xe68768ac,
-	0x633dde3f, 0x0d2fc51b, 0x60a1f90c, 0x8f55bf92, 0xa6f66c04, 0xf6787ca2,
-	0xfa875919, 0x8d6ae4dd, 0x4f74d843, 0x4ce30eae, 0x175a53db, 0xe20bbed3,
-	0x28f1e219, 0x8ba421e8, 0x2a6f1482, 0x25f013f2, 0x829dc39d, 0x7e294d3e,
-	0x8bd60a6b, 0x7efe8e7b, 0xd85e1cf1, 0x4e35afdf, 0xa55279a2, 0x08cdc4a0,
-	0x42ec23b4, 0x7f33b79f, 0x96c3e206, 0xf18adfe8, 0xce2a82ad, 0xd3912cff,
-	0x996f7605, 0x10508f48, 0x3fd5bd3e, 0xe6c1cf0b, 0xe01bcfeb, 0xb06a0774,
-	0x25c93edf, 0x367fee98, 0x39061c4b, 0x3fc2eb43, 0x5ba4e78c, 0x51cec9d2,
-	0x806b6fd7, 0x0eec22f1, 0x968dc7dc, 0xba54e781, 0xf5f620db, 0xe60b2884,
-	0xf5d4f1f3, 0x7ae7cc6e, 0xd4edd61d, 0x62f47ae1, 0x5d0fb03d, 0xfa227ac4,
-	0xd7fafed1, 0xd23b14cd, 0x897e6305, 0x4729cc97, 0xcea17fee, 0xd71a3713,
-	0x615fd6ff, 0xe509295c, 0x67f3ac08, 0x919927fb, 0xf1f7a34f, 0xfb88be42,
-	0xfe8cbd80, 0xe71f4cc3, 0xbf46e6df, 0x0d94fe84, 0x43bfdc61, 0xd45c60f6,
-	0x0c926966, 0x39b5fb11, 0xd99e9eb8, 0x728fdfe8, 0x82796665, 0x8b3df482,
-	0x72b5ae75, 0x0f983efe, 0xfd622beb, 0x7136167f, 0xfe7c4ec0, 0xe24ef799,
-	0x67583a91, 0xcfea3155, 0xbca5eec7, 0xcc8fcd89, 0xcfeb8c3c, 0x3fb93f74,
-	0x7ef40615, 0x3e7dce2d, 0x77656f8f, 0x87bc9ac8, 0xc9acbf2c, 0xac58c88b,
-	0xd07a076d, 0xd95d2ac0, 0xa829d5a5, 0x2509746f, 0x9da06733, 0xf923a492,
-	0x9a4a720e, 0x8d1ed31b, 0x7f812ba2, 0xcdde7cf5, 0xb373a7cf, 0xb039f859,
-	0x737cc55e, 0x7aacd8a2, 0x336f304e, 0xd03279b0, 0x3ead737d, 0x8f1fa124,
-	0xb232f1fd, 0x26f70d97, 0xada73e0e, 0x19cce706, 0xd41fa728, 0x2aaf2959,
-	0x67a0af0a, 0x94fc99fe, 0x1da8d307, 0xc53365ea, 0xabd6233d, 0xcf6b058f,
-	0x3bfd4ae3, 0x0cce7858, 0x4cfae0d7, 0xa899dcc7, 0x32973367, 0xf6e8ff3a,
-	0xe7b547a2, 0x78ef7e4a, 0x50b1a38c, 0xe79c07f8, 0x5af6c74c, 0xcfa3efb4,
-	0x9cbba555, 0xc2f5b161, 0x2f5c0523, 0xa72824e4, 0x90aec8ea, 0x66f04ec9,
-	0xfd23c3cb, 0xb9f2efa4, 0x57e5301f, 0xec43d216, 0x1f087363, 0x3f5dc255,
-	0xa8738629, 0xfba1d3ee, 0x7e3ddec2, 0x5099e9e0, 0x7bf5fd4e, 0xdfa0c74d,
-	0xe32cefd4, 0xeb377eb0, 0xa081819e, 0xf90361e0, 0x7cbe6b8d, 0x440315a5,
-	0x414c8dcd, 0xe3ceabbd, 0x6efae028, 0x25e4218f, 0xb32c5af9, 0xd907246d,
-	0xf4114bc5, 0xe89e9002, 0x6f31b787, 0x91f92b63, 0x8612fcb6, 0xaccd3c79,
-	0x97d20ef3, 0xe30c8d67, 0x383637af, 0xffb0550d, 0x869d1b1b, 0x219f78f9,
-	0x23b43ab3, 0xa8506a6e, 0x8546a6fe, 0xfd799bd7, 0xd50f06dc, 0xf0f46dcf,
-	0x5bd40b7a, 0xd4290f30, 0x6f718015, 0x753aa4b6, 0xe8d01f78, 0x4c17ede5,
-	0xfc1c7ed4, 0x8c27cc01, 0xbc910b8f, 0xf1d1ed6f, 0x7c7f237b, 0x9ab58248,
-	0x3b0ecb12, 0xe8f77f11, 0xcc175014, 0x2b332d94, 0x7836cfc0, 0x7f687a43,
-	0x1032858e, 0x3617bb91, 0x7ea10b79, 0xe2b643b7, 0x7b8376fe, 0xc147f98b,
-	0x9de132a5, 0xbdde00fe, 0x3af741d8, 0x3efc455b, 0xf14cc4b8, 0x2875b066,
-	0x6496ccde, 0xb7863b0a, 0x86b02c77, 0x39031ed0, 0x7bd8e748, 0x00764c8f,
-	0x6ea3c3c8, 0xe6768bb4, 0xca9f182b, 0xb7e5aa5c, 0xaa0b85f4, 0x6646bc68,
-	0xbebd3f45, 0xbcd78f91, 0xa1d21753, 0x71b9655d, 0xf341d226, 0x3fa0a60e,
-	0x53c2ecfb, 0xee10c3b5, 0x3f2e1450, 0x79a172b4, 0x9c4753e1, 0xcebf1fb8,
-	0x79fd405a, 0x5fd9af1c, 0x0d2f5dbd, 0xb79d33f0, 0x0c7e4073, 0x61ca3796,
-	0x5e63271c, 0xc1f182b5, 0xc627d874, 0xbc8c3bf3, 0x4ca7783e, 0x0be92df7,
-	0xf475b0e5, 0x0b677f00, 0x1f23a614, 0xd17c9126, 0x9dc8d7f0, 0xc179f85a,
-	0x32efc0a7, 0x9db82bee, 0xd1673e51, 0x903f6d76, 0x57943a93, 0xfadaedd9,
-	0xe3fa8b5b, 0x443c1a02, 0xe7e6d9e3, 0x9f7a2f72, 0xc70afb03, 0x74bed115,
-	0xd7285f7c, 0x72d8bea0, 0x1b8bea80, 0x44e9c565, 0x0a79d779, 0x53b45ff7,
-	0xeb806166, 0x44cd9617, 0xa4dfaa7a, 0xf5c8f0a3, 0xc2e48bac, 0xc6adf695,
-	0x19f7a23b, 0xf2efbfbd, 0xa88e5cf5, 0x6613e0f6, 0x1edb07b2, 0x9ef0e8b6,
-	0x78adec15, 0x55dc2b8c, 0x402c1d54, 0x1dc8407b, 0x973d25c3, 0xa216cd27,
-	0x51ed8353, 0xa1fc6477, 0x13f55465, 0xd86fd405, 0x6e3c758d, 0x968efb41,
-	0xe3173f63, 0xe6d6ea4d, 0x13db5de3, 0xa63f951f, 0x729bc7cd, 0x7f2a3321,
-	0x7f2a2f2c, 0x7da6946c, 0x545c75aa, 0x51b5d8fe, 0x1a3563f9, 0x967b9678,
-	0xcaf5ffa6, 0x86f81a4d, 0xfd343bf2, 0xd6ee78e7, 0x7754dfb4, 0x66fda6bf,
-	0x7c0d4aef, 0x6b5fc36b, 0x6be6dffa, 0xb1dfb4d6, 0xf69a27f8, 0x2d49ff68,
-	0xf9701577, 0x3feed9be, 0xd06c0149, 0x3df791f7, 0x28de996a, 0x7b9e46f7,
-	0xa7b70252, 0xb9fdfba2, 0x8bfbd380, 0x058f9f12, 0x1c789aed, 0xf135d8f3,
-	0x854570ba, 0x71c61bb9, 0x21df951a, 0x0ee262dd, 0x6bb6bfbf, 0x3ff6d9ee,
-	0xbc60fd0e, 0x1b5cc4a6, 0xff8c3bea, 0x37b940fa, 0x5f747487, 0x4abf5b61,
-	0x69b83d22, 0x5cab8f15, 0xaf3c5230, 0x8eac1d7f, 0xdc46fbc6, 0xeceba96b,
-	0x2da47110, 0x85424718, 0xfd4199e4, 0x7ef1c656, 0xe3574d3f, 0x371a3e8e,
-	0xa418dca3, 0x7e85bcfc, 0xcdc0e309, 0x7bc5663e, 0x02cb7493, 0x069bff9a,
-	0x265d9925, 0xb016da2e, 0x67cc0f33, 0x635c155f, 0x527dbd84, 0xb3d4f7d0,
-	0xcfddbcf0, 0x5bd31e28, 0x1853edf0, 0xe143e98f, 0x219d7408, 0xf73f3c73,
-	0x5fcfeec0, 0xe6daf981, 0x5ca197a5, 0x5acf6e8d, 0x43ebf7be, 0x6e7f6997,
-	0xde1f5bd9, 0x1fe7b97b, 0x25ba75d8, 0x38c87da2, 0xf3264369, 0xe001d044,
-	0x80fde62c, 0xf9f5c85c, 0xc5230af2, 0xfc01aeb1, 0xbfbe0215, 0x89cff8aa,
-	0x3fb9e03b, 0x44eefb39, 0x65ea1d3b, 0x847e87ac, 0x9fe53fd7, 0x9c92fca3,
-	0xa3df6051, 0x9b171dfd, 0x7215c76e, 0x8d6d95ba, 0x6a0718bd, 0xd13a344a,
-	0xbb32cfcf, 0x07193eca, 0x7ee06d74, 0xfeffb475, 0xddbfbf5c, 0x9177fe49,
-	0x944b2718, 0x9e7f2b7a, 0x4e4c8399, 0x3114f717, 0x6a4fa1f0, 0x655e5097,
-	0x8d3f942e, 0x89fd8be4, 0xa4238a46, 0xc1dc445b, 0x171358b2, 0xfb06e350,
-	0x9095ef13, 0x4bc3d3ee, 0xf18f9e28, 0x5c6f1c02, 0x11d693a1, 0x32c82f1d,
-	0x86bad3e7, 0xd7f59f1e, 0xe6314827, 0x1a875a89, 0x279e889f, 0xea04f684,
-	0x64f16599, 0x7bef444f, 0x79556149, 0xd7e470e1, 0x51d393de, 0x90329f7e,
-	0x5e8a1c3e, 0x143ccf30, 0x42b4fe31, 0xfe63dfee, 0xe63d6478, 0xe3228787,
-	0xef41ccd9, 0x2a0c102b, 0x7bb18466, 0x77ce1143, 0xc277cf94, 0x1ec9d8a0,
-	0xfe87b504, 0xd7217d5f, 0x9730d303, 0x19f2386d, 0x81dbcbf7, 0x12dcb1af,
-	0xd67d92b0, 0xf087fc01, 0x9527010b, 0xca9b80a1, 0xda85016d, 0x09ca07b7,
-	0x21e0257e, 0x8ea04778, 0x5e02d7ca, 0x6819dfaa, 0x01e7f820, 0x819d951f,
-	0x46ff54c5, 0x9bf04fc0, 0xbf04d581, 0x0160f685, 0x53d7a9c6, 0x4ad03bb9,
-	0xed037bed, 0x081dbf04, 0xec0e1951, 0x8103faa0, 0x060f824e, 0x287c1176,
-	0x70f82610, 0x479530e0, 0x7f545d03, 0xc101f03c, 0xc93ee337, 0x15df58ae,
-	0x4f8578c0, 0xf77da276, 0x15a16fac, 0x7cfb6bed, 0x79c5159d, 0x04b74fbb,
-	0x8d1d1ce3, 0xef131efc, 0x040e3123, 0xed086876, 0x67fcfb39, 0xf6a54c8e,
-	0x19bed4b9, 0xc4a70487, 0xafdb82b6, 0xfa91996c, 0x0a2130d9, 0xda58eb9e,
-	0xdc03d218, 0xed4f185a, 0xf93215b6, 0xfce9cf6d, 0xeedc8529, 0x336df922,
-	0xa541fb70, 0x5c853583, 0xe429aede, 0x161f5cf7, 0xca4a73f1, 0x9e47ad8b,
-	0xa6ed542d, 0x7f7187f5, 0x3fb079f6, 0x55bcef5c, 0xb597bc66, 0x72b3a3dd,
-	0xcbdf937b, 0xb8bf603a, 0xc50f587e, 0x6e7cd985, 0xade6db2f, 0xe63975a5,
-	0xd6ed48df, 0xd05347a2, 0xaff76f4f, 0x6deb439a, 0xd9ae2994, 0x82903bee,
-	0x89cf6cf7, 0xf0db277c, 0x64a86f78, 0x8d9e7af0, 0xe3077f5a, 0xec03837e,
-	0xec63d7a5, 0x496ed303, 0xc71130cf, 0x331cd47b, 0xe829d78e, 0xfe7121d7,
-	0xc4ca0f63, 0xb0302f7f, 0x2db9e0fb, 0x5105df60, 0xb6bf540e, 0xbd55e302,
-	0x289dbe85, 0x8e779f37, 0x9c03203f, 0xcfc7c75a, 0x82bf255d, 0xf79c3476,
-	0xbf502de7, 0x5e4dbee1, 0x4db0ea5c, 0x6ec835ce, 0xcadff3ed, 0x4397f8c0,
-	0x5a8f9ed2, 0xf9f62dbe, 0xb78f8782, 0xf14c9565, 0x378adb64, 0xbcf9075d,
-	0x33ff91bb, 0xc38a3e8b, 0x5cde4c30, 0x86450ea7, 0x35fc9e63, 0xff7717ce,
-	0xcd423aa6, 0xdf3a8f26, 0x6aef9c58, 0xb1e234f1, 0xc62f9b5a, 0x279286ba,
-	0xbf239257, 0x81ef1429, 0x942cb164, 0xb819cf23, 0xe49e0adc, 0x052524f6,
-	0x8f3c1a4d, 0xe6a02f9a, 0x0be7440f, 0x29e05efc, 0xde62c4cb, 0x4fd67ee7,
-	0xd73a41bf, 0xbd1b3c17, 0x92e36794, 0x35874931, 0x7a12d819, 0xde2aa7ef,
-	0x3d0626ba, 0x2853e5a8, 0x1fc100c7, 0x2e713216, 0x38f8ea9b, 0x64ce3e3a,
-	0x2ae082b6, 0x4318358b, 0x33e5ab5e, 0x2b7f9c62, 0x759b74e4, 0x870dcedf,
-	0x1a8f7cf0, 0x8b6a3728, 0xfd01b42e, 0x3d09e084, 0x7d4cd7c9, 0x2257d6e7,
-	0x4117f5d6, 0xa18c5b9f, 0x6e87bc62, 0x504af187, 0x94bf22ae, 0xd582fc50,
-	0x7d5de047, 0x1d843fee, 0x75c5fcf0, 0x3cff7429, 0xda1c6d6f, 0x4ccced47,
-	0xf83360f4, 0xd046c653, 0x32e90d83, 0x8b387d06, 0xfc0e348c, 0xe226aa59,
-	0xcbd70cbd, 0x60972835, 0x2616fbdd, 0x99ac3e91, 0x31acdeff, 0xc9f65700,
-	0x65b2cf94, 0x9cd3cf29, 0xca3aeff4, 0x31fb7913, 0xf75df7ee, 0x9fbd2d50,
-	0x67ca2194, 0xb283cfd1, 0xc2533d72, 0x0b952e70, 0x99bf142d, 0x133e417c,
-	0x4851a7e9, 0x17fa3c7a, 0x6d735e3c, 0x0f79acaf, 0xb68f526d, 0x8f54603f,
-	0xb7464676, 0xef3edeb6, 0x6153d3cd, 0xfca5f69e, 0xbf8bf6e1, 0x7070823b,
-	0x24e28e95, 0x5064fbea, 0x4df14193, 0xf9819839, 0x8ccc1b9b, 0xbe6db9e4,
-	0x60f28ad9, 0xc93c7a7f, 0x2cdbf6bf, 0xcbae8764, 0x3b438a6f, 0x556f34d9,
-	0x8c23960a, 0x3b18adc1, 0x2dd5e6bd, 0x9127d937, 0x55f355bc, 0xec1cac82,
-	0xdc8dbb81, 0xf73e09c8, 0xe51954f4, 0x9967cf25, 0xa796eaf4, 0xadd8f983,
-	0xd4e1d695, 0xf9be4cb1, 0xba76f87e, 0xbeb896b7, 0x1da11a70, 0x7ca379e0,
-	0x7b4115d7, 0x3f705a46, 0x9cb66d36, 0x6b7ca469, 0xf982324c, 0xccfd0b0d,
-	0x658df588, 0x573e48e6, 0xf2fbe4f9, 0x87c63c7f, 0x0e595f87, 0x2bdc695c,
-	0x3e417bf1, 0xfca19be7, 0xf210d369, 0x1f8ff554, 0x8bfce029, 0xf57a4b6c,
-	0x7da6318c, 0xce22abf5, 0x9e46e567, 0x61bb32a7, 0xc3dd1d5a, 0xcc65bb04,
-	0xdc517be7, 0x27a7b50b, 0x7b713dd2, 0xbde30b2e, 0x8e817041, 0xf8d27bc7,
-	0xb98ded7f, 0x936a1f14, 0x3cc129fc, 0xb9f097cc, 0x01dafcf0, 0x7f308947,
-	0xeb970e5b, 0xe2b7e42c, 0xb38c357d, 0xe0fd7238, 0x74b505ef, 0xa61ec8cc,
-	0x789e85f8, 0x888c69cf, 0x1c5c63b7, 0xcfd117e3, 0xc2d5ee4d, 0xe1682e53,
-	0xc0d0662a, 0x3c2d6635, 0x3785aad5, 0x7d3b7115, 0x3f5b5dba, 0x1d85a9c3,
-	0x74e307d9, 0xc2dfcf3c, 0xf049e222, 0x447e5ef7, 0x68dd681c, 0x765f3efe,
-	0xcb8a52f7, 0x78f0e5b6, 0x3695638f, 0x42c591ce, 0x732fe212, 0xd63c5469,
-	0x863f66bd, 0xa30bed97, 0x5efc41e3, 0xa9a1f002, 0x7c8a3147, 0x9e68eaf0,
-	0xd23dde87, 0xce08bdb7, 0x5f0c60b3, 0x4d1dabc7, 0xdac53f74, 0x5caf88d3,
-	0xb0695f22, 0xe88a7cbe, 0xf90f1d40, 0x7fb11822, 0xf84887e4, 0x37be51a1,
-	0x8be41e70, 0x2cfea460, 0xfbd036e9, 0xa1be62ab, 0xcfe543f8, 0xa28f7172,
-	0x89f4dde6, 0x9bbcd4b1, 0x705f2255, 0x4ebe5457, 0x1936a39f, 0xaebee7fd,
-	0xf8b1f195, 0x682ef910, 0xe5887ce2, 0x837f9106, 0xe22c187c, 0xa6f5887c,
-	0x637856ef, 0x050b8bd9, 0x63bfdc5d, 0x224f86c9, 0x73acb7f6, 0xbe5e0685,
-	0x910de1eb, 0xe3f751f9, 0xbf08303f, 0xed7e519e, 0x2f9db152, 0x2bcbff4f,
-	0x48cd0ccd, 0xcf2807df, 0x319c1596, 0x5ea77bf2, 0x42eb9e23, 0xcc99ff61,
-	0x2fd1f2b3, 0xf2e211db, 0x37889d6c, 0x33155b34, 0x3b9981c6, 0x50c71355,
-	0x4b4d11e3, 0xd854b65c, 0x7c7f7247, 0x7ca56bc1, 0x14f9e1dc, 0xf1aa48df,
-	0x32c6cedc, 0x9c6453d6, 0xdd62066b, 0xc056c18e, 0xd957f9e9, 0xc0c74133,
-	0xf8174dbe, 0xb0fdc97b, 0x8f2467ec, 0xea68e42e, 0xa39c44db, 0x0b2dbf9f,
-	0x8b3e70aa, 0xb0fb49db, 0x1e1aff31, 0xd1c6d417, 0xe73de24c, 0x343be3c1,
-	0x7e226df5, 0xb5f1e572, 0x85d33971, 0x2fc621bc, 0x1adf1a8c, 0x7181fc73,
-	0xabbdf1b5, 0x714f37b8, 0x2e3a184f, 0xe9cdd236, 0xdfdd9d69, 0x83317185,
-	0x06667fe0, 0xf288993a, 0xe3e9ff80, 0xc1ae7e79, 0x198f8da1, 0xfa0baf30,
-	0x98b8973f, 0x3efa8ae4, 0x0599fdb5, 0x27cbca12, 0xa4e8fdf0, 0x5a24f2c1,
-	0xde44d88e, 0x811cb47c, 0xd37034f9, 0x36cf5cc3, 0xe50f8a4b, 0xfe7ef473,
-	0x7587f17f, 0xc8bbe389, 0x778eceae, 0x0f632e9a, 0x638205b7, 0xf175b9f1,
-	0x0778c5fe, 0x918ef77e, 0xe3944f69, 0xf88ceb7b, 0x298ec56c, 0xb60f3173,
-	0x13ebf04d, 0xa7a23a69, 0xb7d3dbf4, 0x29e823ea, 0xa173e8dd, 0x13ae9c3d,
-	0x87f85ff9, 0xd227b471, 0x318c6db7, 0xa9d76abf, 0xd601adb0, 0x6d8e7111,
-	0x9fee9ec2, 0xadcc8eef, 0xd27188fa, 0x34b1be4d, 0xa3fe7f5f, 0x87e5af98,
-	0xc459b7cd, 0x6cf9d4c3, 0x67f76a77, 0x7f69fa33, 0xd487a136, 0xfee336f9,
-	0x15d5f062, 0x75fe13e7, 0x69777cff, 0xf93367f7, 0xf5367f69, 0x7cea1b3b,
-	0x3e6c3f2d, 0x76cfe0bb, 0x3d97def1, 0x64377f9e, 0x9a23f7a8, 0xbdccf3fb,
-	0xed2f9466, 0xe850bc6a, 0xfa5173bb, 0x3be849ae, 0x6973f9f5, 0x3dff14b9,
-	0x7326f877, 0xfa873d2c, 0x933b098d, 0x09933b09, 0xd9e1133b, 0x0d57a735,
-	0xbbfc7a07, 0x95cf371d, 0xbecfaf41, 0x1cf8f4ff, 0xf1d9df80, 0xe832b98b,
-	0x9eafd9a9, 0x1e0b337e, 0xfbdbfe29, 0xe9f4fc38, 0x5bb4073e, 0xadcccf82,
-	0x18693805, 0xbaeacfd7, 0xb97779d5, 0x7cb95db9, 0x6f8f1e75, 0x3d459c82,
-	0x67e39cd6, 0xcafc7f18, 0x1f349bd1, 0xeecf2ffa, 0x03105f4d, 0x7cb96a2f,
-	0x1e7f2175, 0x9889c0ad, 0xaf48c6cf, 0xc7bea8dd, 0x8f7da752, 0x23692925,
-	0x2c7187d9, 0x96394564, 0xfbd0f660, 0x7316d797, 0x533370bd, 0xe15fb81a,
-	0x1c79102c, 0x4dcbdef4, 0x6b5c62e5, 0xfdb12fe5, 0x09e79d66, 0x79ff77f4,
-	0x68e1bcd2, 0x7379ab3e, 0x3bde06a3, 0xde7dfedd, 0xb1fd9e4f, 0x64e56dc4,
-	0x36998f1e, 0x7bdfc9ca, 0xa22b888b, 0x3e143c5d, 0xff73753f, 0x1e9f007e,
-	0x0f54cf8e, 0x37b5a7c7, 0xff9c0d69, 0xf4de94f2, 0xc34f89c7, 0x0835f131,
-	0xfbf851af, 0x7ea99b93, 0x88ed1ea0, 0xc55be12b, 0xd85f9aab, 0xc80b392c,
-	0x9a19675e, 0x14c660fc, 0x1e7bac67, 0x3d48cfa4, 0x197bb46b, 0x3486a3da,
-	0xeff98dc5, 0xc7d17fcd, 0x1573dbcc, 0x525ef88b, 0x367de53c, 0x1fc91927,
-	0x93349fdf, 0xb659fc61, 0xd4bc234c, 0x3e51d526, 0xeb187ea6, 0x3a357f44,
-	0x7c9f5d0f, 0xe909e53b, 0x4061e86d, 0xecc79fd9, 0xe95f2331, 0x5d92563f,
-	0x99570048, 0x295f2e87, 0x26753d0f, 0x324f43cf, 0xd85e313a, 0x998c689e,
-	0x9badfe87, 0x71fb5dfb, 0x1fb8697f, 0x886eff23, 0xe56c97d8, 0x9f58eef7,
-	0xab46f500, 0x5dfc518f, 0x615bffec, 0x4dfda907, 0xf9433f56, 0x4e2a37a0,
-	0xa9f45fb4, 0x77e07f5c, 0xe231dc5b, 0x0dbb5f28, 0xa3fdfcf4, 0x99cf5cac,
-	0xfb3eddb9, 0x27dfb137, 0x44962b28, 0xdd3624bc, 0x3737450d, 0x9dde78ea,
-	0x2d7397ca, 0x9c07ca46, 0xf7d3b16b, 0x2102e66c, 0xf446a4f6, 0xfe56eebf,
-	0xd8acb53e, 0x7b7e9e91, 0xfe5f94ed, 0x00b5e196, 0x66a7db97, 0xc2bde818,
-	0x28f31253, 0x5df383a9, 0xa994debd, 0xea1bccb8, 0x7645af4f, 0xc8c3182c,
-	0xc1757a4e, 0x4e95ad43, 0x8aea8ff2, 0x737d9e91, 0x770fa2a6, 0x77d8c363,
-	0x04f2ffb1, 0xfbd5cf2e, 0xfc09e5a5, 0x646bde7d, 0xffec6cdf, 0x4917c555,
-	0x725f48d5, 0x2bae0e6f, 0x33dd3fa2, 0x5b9ff445, 0xcffa813c, 0xf5ddafe6,
-	0xce3977d2, 0xc8f99da5, 0xec7ce8c7, 0xf429ecb1, 0xbde458b7, 0xe81f9086,
-	0xa3d64577, 0xce22c5bf, 0x6e505a53, 0x4f218eeb, 0x3ec332d4, 0xa042e46e,
-	0xb18c8cd7, 0xcff5aa54, 0xa175f47a, 0x90fce718, 0xec1fe738, 0x6ac3b4f7,
-	0x3df80e27, 0x843cefe0, 0xe172f8f8, 0xb0f1f4a9, 0xbf6a07a5, 0x6ec7bf26,
-	0x16ceffec, 0xb00371f9, 0x2db3bef6, 0xdf8c5bd0, 0x87886019, 0x8bf91189,
-	0x25f6bf62, 0xefd0526b, 0x20f4b381, 0xbc0476dd, 0x030d6b23, 0xe42cbfcf,
-	0xd2160b08, 0x2eb106f3, 0x0ceb5a47, 0x2c38bb8c, 0x6073ca3a, 0x6791aacc,
-	0xa6536a73, 0xbb0ba1a6, 0x2716299c, 0xe45df7fa, 0xfbe06417, 0x7c9f180d,
-	0xf78636e7, 0x9d69595f, 0xfd75da12, 0xc6f788f3, 0xe17b8957, 0xed2d5f3e,
-	0xefd6c327, 0x5ff23197, 0x507382d3, 0xc33df56e, 0x92f19457, 0xc691ddb6,
-	0x5dee1ff3, 0x02721f18, 0xed2d67bd, 0xb04f4fc2, 0x30f8700c, 0xa9719fa6,
-	0x7282d5d9, 0x140957e6, 0xe7b7d677, 0xfbc820b3, 0x1bfbecb0, 0xf9c877c2,
-	0x6c4f2e90, 0xb65b9e16, 0xb9ec9e28, 0x0675a976, 0xe8f731f9, 0xd178ac58,
-	0xa7ee62ce, 0x2b628ffc, 0x4fb5cfbf, 0x1f63f4e4, 0xb8e1723f, 0x77ffe7ab,
-	0x49f99e84, 0x7fde93b2, 0x4da3ed52, 0x8e47f843, 0x5f213a91, 0xf8115e84,
-	0x199f3333, 0x792f45f9, 0xc774b079, 0x96bdaf6b, 0x5b53e8ce, 0x841b4748,
-	0x138ea3fd, 0xc6a21f9f, 0xf243c578, 0xb87ab252, 0xedfab0be, 0x75af3841,
-	0xce63e9df, 0xfba085ff, 0xd90fd935, 0xd3ad7fb1, 0xfa32c6e7, 0x9c96983d,
-	0x3e78dd7b, 0xe9fb332d, 0x96baec95, 0x61dfce33, 0x28f0563e, 0x9fd837cf,
-	0xefc3685d, 0x1b0e5941, 0xe265d364, 0x27d046f1, 0x19d8cbce, 0xdeaf9146,
-	0x99e78072, 0xbaca58b6, 0xc5a1af30, 0x6a465692, 0x56f3c2d8, 0xcb16fed5,
-	0x1607d221, 0x5adfdf85, 0xb8487f50, 0x0947c04c, 0xe110ebae, 0x5077ed43,
-	0x128b5dc8, 0x5a5ef866, 0xfd4ad29c, 0x83d7b2cc, 0x34e6ca79, 0x6644f746,
-	0xe217f02b, 0xccc75f35, 0xbec9f431, 0x5a4fae62, 0xaabaca4a, 0x7e327d69,
-	0xd8b58eb9, 0xe7a4eccb, 0x7cf0ef11, 0xcf968673, 0x577813bf, 0xf91669c7,
-	0x4eae77b4, 0xc38ed609, 0x1bf79338, 0xcb16e7a4, 0xf5107302, 0xcbf8e25a,
-	0x391a678e, 0xd7fb78d4, 0x43bef18a, 0x2c4fae79, 0x0678e2b3, 0x8d15f7c6,
-	0x9c62e1f7, 0x7bfbd5ff, 0x47bd2cc0, 0x581d304d, 0x7deb1ed8, 0x13f3feac,
-	0xcfd1f2f7, 0xbc7960fd, 0x02871b56, 0x091eec79, 0x72565afb, 0xd53550e6,
-	0x0bd3f8f0, 0xfd519fc2, 0xf6317492, 0xbf7f120b, 0x2bc5283f, 0xe10c5df4,
-	0x69c7a4a7, 0x3ef030f1, 0x6f873f2d, 0xde1e781a, 0x7c4c6937, 0xd7cb4e87,
-	0x38ff1cdf, 0x059f9345, 0x7131ec7c, 0xde23c63f, 0x3888f5a7, 0x6f18c21d,
-	0x049d17a0, 0x89c7f7ff, 0xc33f9c1b, 0x4099acef, 0x5c60eb8e, 0xfa27e1c9,
-	0x5dba3936, 0xe239efc8, 0x78d10ffb, 0x2e48c9fe, 0x7a47a5af, 0x51af785c,
-	0x119bd69b, 0x7c5fdf8b, 0xee0642f8, 0xfd19c5e7, 0xdf743b79, 0xe769e2f4,
-	0xcbc402e6, 0x6ffbed11, 0x474df8ea, 0x22f8a7ce, 0xe5c0a5fd, 0x3a4b2fdf,
-	0xd92571b3, 0xddb80b8d, 0x7dfa7ff8, 0x73e617b3, 0xa497753b, 0x084fcf95,
-	0xfc141cb9, 0xd320bb60, 0x2aee43f7, 0x3a40adf2, 0x0bac936a, 0x3ce72e50,
-	0x9af2f3cc, 0xb3d55b1e, 0xb47f0628, 0xd5fdf28c, 0xbabf08c8, 0xe491bd7c,
-	0x3725b35e, 0x28f772f9, 0x9fbb9f43, 0xde7a94e4, 0x79988f55, 0xdb8f8abe,
-	0x7bbee9d1, 0x3a260f29, 0x7ea8653f, 0x449d23d5, 0x137f6a0f, 0xc5f28f8e,
-	0x15c52372, 0x818fa1ce, 0xb72b3b71, 0x59d7a233, 0xc098c889, 0x7d0663f1,
-	0x49607499, 0x106b8e1c, 0x6a0bdcfe, 0xcca1a45c, 0xde7889ec, 0xb9995b70,
-	0x9a4e823a, 0x8e0fcf19, 0x2337ff1e, 0xac22fb55, 0xa80c63b1, 0x94c6317f,
-	0x97ed9f26, 0xf278643b, 0x0395b4fc, 0x0ee3cc7c, 0xc5a3e743, 0x232dbe71,
-	0xf30dac7b, 0x5e0ec0d2, 0x0460b0d3, 0xf64db7e2, 0x3c0368bd, 0xa2687ef4,
-	0x0bdfea3c, 0x7c16ed3e, 0x05f9d43a, 0xd23001d9, 0x1d9c7b18, 0x80e297c4,
-	0x2327c64e, 0xebe7345f, 0xf63142ea, 0xf3ec5c79, 0x7878f632, 0xc7b3f7e4,
-	0x1afe890f, 0x6ded1c7b, 0x46fdd44f, 0xb6768c24, 0x7e3d8627, 0x05f11242,
-	0xc2742791, 0x0dd5dce0, 0x39313978, 0x5697be99, 0x5defc090, 0x527fa04e,
-	0xabc87e06, 0x7ed1f3a7, 0x7ff52d99, 0x43f84917, 0x47f0608c, 0x62f905fe,
-	0xb6bff30e, 0xe23e2248, 0x1b7835f7, 0x73e57e9f, 0xd19236de, 0xf9c036ba,
-	0xdb46fde1, 0x6233f9c5, 0x8ea467dd, 0x5037fd52, 0x13ef1165, 0x889d3c33,
-	0xf741acfb, 0x72f75174, 0x9fd36d78, 0xdc1fac77, 0xed7286ff, 0x8b86d9bd,
-	0x5a622e3c, 0x4b8f42c2, 0x6daa9798, 0x10cea9bf, 0xb9a82f7d, 0x6bd9bb4f,
-	0x7d0f5e88, 0xd621d417, 0x1f71dd9b, 0xcd4fbfdd, 0xa644f9e6, 0x04e28c65,
-	0xa66df7d1, 0x3d1e5db1, 0x8c0dcfda, 0x38e8fdec, 0x52a9e639, 0xb181b0fc,
-	0x79e5122d, 0x7973df6b, 0xfe73fea6, 0x3ad6947d, 0x760ec79c, 0xd1d3da10,
-	0xf7a849ef, 0x51f7ea5a, 0xdfab3c55, 0x4dbf4a8f, 0xc163eb47, 0xc6aed429,
-	0xb87bf1fd, 0xf911e955, 0x7f582be4, 0x2b7f7a7f, 0x9bdf7b18, 0xcf29eadb,
-	0x7fbc7320, 0xb29a186c, 0xc8784614, 0x6fc8c85a, 0xf2683c00, 0xdbd94c09,
-	0x16e79f69, 0x224c3633, 0x33da683c, 0xfdd3d340, 0x7e6d42c0, 0x0353ec01,
-	0x57abfb47, 0xd94d53f2, 0xf39597f9, 0x9a638a57, 0x94e4bdc4, 0x97fbe251,
-	0xed14aca5, 0x9edbf4a2, 0x0738f3a1, 0x5f7181e7, 0xdd629c74, 0xf1826e3b,
-	0x77fc8fd1, 0xe2cd2fc1, 0xaefd5b6e, 0xf4c8f30f, 0xce549b1e, 0xf30d2cd7,
-	0x12e97bf2, 0x8a6e7c46, 0x8fcc6667, 0x1e4c2a97, 0x04c9bbc4, 0x32596c30,
-	0xd4067332, 0x7b3c45eb, 0x8464c48d, 0xf3315599, 0x5dfaa3f8, 0x577d10a1,
-	0xd479a868, 0x20b22bef, 0x679d4e7f, 0x2ef577d0, 0x7bf93cf3, 0x6be7e8d6,
-	0xcea99e29, 0x87fe143f, 0xbfde8efa, 0x8137bcd5, 0x441d53c7, 0xf4038daf,
-	0x417cf04a, 0xca3cf88f, 0x66d5bb85, 0xfa29577b, 0x4c1e670f, 0x114a3650,
-	0xd2ce08fb, 0x7e03eff3, 0xd7faf1bf, 0xbc927761, 0x1897dfef, 0x8beefbef,
-	0xdae422fe, 0x09597c3a, 0x191a5ef3, 0xfba431e5, 0x29973faa, 0xa0f600ff,
-	0xdf111391, 0xd6f18049, 0x1fefce3d, 0x3e77e336, 0xc0e7fef0, 0x13edfe40,
-	0xd1f76c16, 0xbcd43677, 0x5da3cc5c, 0x3ef0325b, 0x837df472, 0x89c611bd,
-	0x99b26f98, 0x9f401305, 0x0531f4a4, 0xb9ecf3bf, 0x03a65468, 0xa07d6c7e,
-	0x93bf0150, 0xa5ee8999, 0x337ead2a, 0x0ae10eff, 0xef676916, 0xefa56e97,
-	0x64bf86bd, 0x3e14bf94, 0xc3ee88cf, 0x70c4c39f, 0xddf8ff2e, 0xcbe47afb,
-	0x7a5d7da9, 0xfb93f3d4, 0xf67fa4fc, 0xed3d4fd9, 0x9962e7e2, 0x751f9111,
-	0xcf545b1d, 0x979f8ae9, 0x5f27ea2c, 0xfdf86a30, 0x46a35eda, 0x5b17c81e,
-	0x65fd46be, 0x67aa89ea, 0xe3e33fd3, 0x2dde28f9, 0x53edb5db, 0xdbd03e44,
-	0xc35fdf2a, 0xbc73a1ae, 0xcf331698, 0xd5dce06e, 0x71e26e73, 0x79c7c674,
-	0x9ff7946e, 0xff404d46, 0xe87147c0, 0xd82fc464, 0xdd952917, 0x58798ecc,
-	0x8e994ce5, 0xf3b2bd72, 0xe487a41d, 0x3c0f3cb3, 0x5ffdfc7a, 0x7e8595be,
-	0x9dc99ec3, 0xed2f6859, 0x3d15f2f9, 0xd3d5578e, 0x193eb0cb, 0x58a41e4a,
-	0x10aa784c, 0xcf5033b4, 0xf59144e3, 0xe74a9eb4, 0xcfe4e565, 0x871a4e50,
-	0xd933df6e, 0x87e4c2c2, 0x3da02675, 0xfe7c7cc7, 0x57cab364, 0x70972fec,
-	0x9f81845e, 0x52ea54f6, 0x7b9f616a, 0x6c15919e, 0x46f3d3dc, 0xe7bfce02,
-	0x7acd39ec, 0xf322fe98, 0x5afbac45, 0x2b53ee71, 0x7efec97b, 0xf92bac4a,
-	0xa1c52f6c, 0x30de9553, 0xc3d4dbea, 0x37fefa7a, 0xc8bcf0b3, 0x38a14c61,
-	0xfc5eba9a, 0xd73e2a6e, 0x88de7282, 0x5632b3fb, 0x287eec28, 0x55832a33,
-	0xcc9a8f98, 0x6b484a76, 0x417d2b53, 0xa5e4e7a4, 0xad939e9c, 0xbf18c3fe,
-	0xa3af5e4f, 0x59f24538, 0xcbf406df, 0x0565cb92, 0xf84ae4c9, 0xb7f310ec,
-	0xf9d4f98a, 0xa88cf5d5, 0x7ee84bf4, 0x62e3b324, 0x132aaefe, 0xcc5abf8e,
-	0x59eb14ef, 0x2c3be8c5, 0x55ad67c9, 0x83272fe8, 0x33df419d, 0x9a79e2b8,
-	0xb745f335, 0x99d94f27, 0xb1e0e745, 0xe30ad91e, 0x365b64a5, 0xceb94154,
-	0x32ff23a1, 0x3c5187a9, 0x9d27a93d, 0x4f527de4, 0x8a2728a1, 0x0f4269fa,
-	0xd4933970, 0xaf2d50f3, 0xa4d2a16f, 0x3f8717ca, 0xda98fb8c, 0x717cb8cb,
-	0x98be4978, 0x517cb8d2, 0x9556b8e9, 0x325acc2b, 0x0ff7ea1f, 0x06b5acff,
-	0x73f77b9e, 0xbbe5fefe, 0xbcbe5cd9, 0xfbf725fb, 0xd3bf694d, 0x42aa5ca3,
-	0x4dfa05c3, 0x33edc0bb, 0xbaab1f95, 0x48113625, 0xe7839a63, 0xc8ba1f87,
-	0xd9843b9f, 0x63af00d5, 0x9529c912, 0xdd056b6e, 0x83eab3ae, 0x81fed849,
-	0x3477de89, 0x98e5ce39, 0x83fe1ec1, 0x7c41f7ae, 0x33f7f8ef, 0x415def7a,
-	0x437e82f5, 0x9a2e494b, 0xe4396c84, 0x3e416058, 0xae487984, 0xe918721e,
-	0x3a080ebc, 0xe9af673e, 0x5b3fc308, 0x69fcdfcc, 0xc1ffd43e, 0x9340eb9e,
-	0x1e973d4c, 0x885f2f41, 0xe82b3bf3, 0x7bdd29a6, 0xfc04c953, 0xcd1e62fe,
-	0x0dfece7b, 0xdcb27fbd, 0xc69f1ff6, 0x3aa72efa, 0x4f7cfa8e, 0xcf19a568,
-	0x1f9bd0f5, 0xabb4409f, 0x7b235fe3, 0x7ee3e4ef, 0xd0f89a33, 0x78cf3b12,
-	0xadf3fc90, 0x8b7f9688, 0xc80f864a, 0x91667abf, 0xe7121e79, 0x1e4259eb,
-	0xddb8554d, 0xe7e56f5e, 0x5fb25f55, 0x8b8afea6, 0xd2af55f6, 0x5ae4f28d,
-	0xf29b7fe4, 0x7d4bd124, 0xbd97a73e, 0x0a0f9e82, 0x63ecce7c, 0xed97e89d,
-	0x196e982f, 0xe23ef80b, 0x1cff13d2, 0x52c6bb19, 0x291dcf06, 0x024bf095,
-	0xd6c97a6c, 0xcf00a9b5, 0xa7a22452, 0x1dad92fa, 0x967fd04d, 0x03a94135,
-	0xb3f9e8f8, 0x0eaf3416, 0x9784bc05, 0xe3f872e9, 0x1b9e1754, 0xcaccd3c7,
-	0x4ffe8cb0, 0x8cbf63bd, 0xc46df6fa, 0x2ee311ab, 0x7567c11e, 0x6a571f04,
-	0x238fb82c, 0x2f2126a5, 0x5e51e33d, 0xd537cace, 0x7c75a18f, 0x1a4c6c7d,
-	0x506f77be, 0xa73c95f8, 0x7e82c9ff, 0x6b27ccea, 0xccdfa053, 0xd7196692,
-	0x912cd47b, 0xd7da3cfc, 0xc793f944, 0xd2ac393b, 0x74073d2d, 0x5b6fbc79,
-	0x6fb61273, 0xd53e4897, 0xe21d2f2b, 0xa7d38fea, 0x0b0f7e3a, 0x3077e1b6,
-	0xb7af29cf, 0xb1f53e60, 0xcccf05be, 0x7f1c3c01, 0xb8c43f53, 0xc0ad1f4d,
-	0x244cdf71, 0x356d9e3a, 0x8cb1f469, 0x5e84694e, 0xd36f1ead, 0x0d4af5c0,
-	0x29cfd3c5, 0x7806e592, 0xad5df3de, 0xd191397b, 0xbd77da52, 0xe14c7be8,
-	0xa1cc797c, 0xd63cbe23, 0x8a9cb8f7, 0xfb4659f0, 0xde769991, 0xb21a92fa,
-	0x5b29ceaf, 0x826744f5, 0x54f1d50f, 0x4f8a3e3a, 0x9ced1e23, 0x6df68fff,
-	0x1dbd20b3, 0xe323bf75, 0x89675d39, 0xa1d0571a, 0x5df0dfaa, 0xda9fa471,
-	0x7ef3fb51, 0x3851eb86, 0xd7946bfe, 0xd57d238f, 0xa7a2643b, 0x9afecaa3,
-	0x27bf8614, 0xffecd262, 0x9ac91dfe, 0xda7597f1, 0x5db47034, 0xdbfdcfb5,
-	0x0ec4cba7, 0xd847a466, 0x3ec2f947, 0xe0771fd2, 0x1768aefa, 0xf7e8eb29,
-	0x45d90649, 0x8a2edcf9, 0xbe5487b6, 0xb889d66e, 0x65c78eac, 0x58dff9a3,
-	0xf1eec3fa, 0x8e492ad8, 0xc65bbfbc, 0xbe9073ba, 0x8612a3e6, 0x75d01ef1,
-	0x15fc23a7, 0x078b6deb, 0xccad7c39, 0xbfbf6976, 0x3f37bfca, 0x1e77d4be,
-	0x367495e5, 0x6561df4c, 0x07e518ab, 0x9e786be8, 0xad665e11, 0x258bd488,
-	0x8d2df1fd, 0xd84ba45d, 0xac78859b, 0xf1e46b38, 0x38e89e8f, 0x851fea97,
-	0xae2bf225, 0x93ea2e52, 0xe67bb8f9, 0x7f6778f0, 0x938f3379, 0xe5fc0915,
-	0x5d691a94, 0xdcf7808a, 0xb59efb16, 0x41fa54a4, 0x07dfa2f9, 0xef8029df,
-	0x61e690af, 0xb1553d9e, 0xca5291d7, 0x9777b5e3, 0xa14af278, 0x15f12a2c,
-	0x3d5e2296, 0x77d35f60, 0x9f643dc5, 0x33bce3a9, 0xfd16e3ca, 0xbcc96146,
-	0xee8f0edc, 0x6863ed07, 0xe3d8869c, 0x7a38fb40, 0xf6ec6e7e, 0xfc39b843,
-	0x30fb237d, 0x0c0643d2, 0x52f2a664, 0x16e5e32a, 0x8846aefa, 0x1e0de7fb,
-	0x9146f3d2, 0x103788af, 0xf4c7fc91, 0x1cbe34f5, 0x58f7419e, 0x8325d82d,
-	0x7691f9fb, 0x6a84ac94, 0x6aade322, 0xdf94a8b9, 0x1528ce73, 0x604cf3ef,
-	0xa8afc813, 0xea3cfcbc, 0xc3cd43f3, 0xc85765ec, 0x63f35e7b, 0xc3fa49d3,
-	0xa55f27e4, 0x4a0e607d, 0x1f39df91, 0x4a89bf6a, 0xc28a1c94, 0x5cf350d3,
-	0x22dc79ed, 0xd76af6e8, 0xcc7a655d, 0x2ed1f94e, 0x056b07ce, 0xd5dbf57d,
-	0xbe3f1e3f, 0xfe861f3f, 0xfefbd9ca, 0x4a7ef893, 0x37a56842, 0x145e7ec6,
-	0xe531f9fb, 0xce70d3c1, 0xfba18c1b, 0x0799ded1, 0xd20263a7, 0xf1f2c77b,
-	0x9eb005f0, 0x2dfcc537, 0x6feb9596, 0x1c5b4785, 0x1ef998ba, 0x7a78fe6f,
-	0xd93f0da2, 0xdce395ff, 0xa7206dfb, 0xd07d1e5b, 0x7581b0ac, 0x15d96b30,
-	0xe347f9ce, 0x6d5d7513, 0x625e305b, 0xf7aabd4d, 0xaf5c5a14, 0x697de024,
-	0x764de7ed, 0xb4460efc, 0x43c6a03d, 0xc6a5bd54, 0xa4bb544d, 0x1fe3c1c2,
-	0x7bfced33, 0x69f6153d, 0xb20fdfa4, 0xaff21aae, 0x226d3b30, 0x19fd0ab1,
-	0xe4fb5add, 0x4657bf3a, 0x9eda2a3b, 0x45334da8, 0x7abd07d9, 0x1715df94,
-	0xfe54fdb5, 0xc454acf8, 0x17795451, 0xcf9a4765, 0xbb40499f, 0x670bedeb,
-	0x8d142e28, 0x5c2eeb9f, 0xaebd9fde, 0x83f74f5d, 0xb7ad71d1, 0xfdd2e42f,
-	0x1baf11a0, 0xcccad4c1, 0x808cc43f, 0x6b7b4c97, 0x18ec1195, 0xf82983a3,
-	0x58fc36dd, 0x8d0dc633, 0x7c9c7817, 0xd7fb9d84, 0x2fc18b89, 0x95335185,
-	0x78c17da0, 0xef48ce7c, 0xef5d99d3, 0x09bdbd91, 0x9e2186ea, 0xa6199ec7,
-	0x5307118b, 0xc08a63cf, 0xb7e66eef, 0x4d81efe3, 0xf7f78bb1, 0x59db462e,
-	0xa22d3cfc, 0x2d62e27f, 0x3ce22d3e, 0x435b8327, 0xd3ec79df, 0xe7116f3e,
-	0xfb1a596b, 0x63a3ec1c, 0x7aa2439f, 0xc5b6130e, 0x596c39e1, 0x758a4dbc,
-	0x2f8b990e, 0x845b0e7f, 0xefd2a95f, 0xb204acb4, 0xe8a6f7af, 0x7b41fbe8,
-	0xcb59c313, 0xb2fdfe31, 0xaccfde99, 0xb4367110, 0x6b9f10a4, 0x84bf97b7,
-	0xa371db71, 0x7b8e74f5, 0xbcffd125, 0x60feff8e, 0x1fea78cf, 0xf883b327,
-	0xfb0780bb, 0x1bbbe9aa, 0xd3bbfcd1, 0x33dd007a, 0x3db9ceb6, 0x839c016b,
-	0x9980fb25, 0xcf839bfb, 0x4a3fef07, 0x7b4bbe05, 0xa654b9f8, 0xbda3d49d,
-	0xec66f25e, 0x8fe351f3, 0x3a9da47b, 0xaa362b20, 0x98fc8baf, 0xeca33b91,
-	0x642db3e9, 0x47c65b67, 0x39c0f7d5, 0x9f8ebdd1, 0xa1d916ec, 0x87ebaf3d,
-	0x114aa738, 0x7d7f3087, 0xfb65e28a, 0x7e714efa, 0x25c6d1e9, 0xfe5df727,
-	0xe7135e9c, 0xa1c453b4, 0x00e22e7e, 0x7e7fc29d, 0xf2a4e023, 0xea9b80cd,
-	0x04280adf, 0x0b940aef, 0x77cfc161, 0x47cb3e56, 0x84aaaf17, 0xcf47edfb,
-	0x7f7dbf73, 0xbe83a862, 0x42de74ef, 0xbda417df, 0xdbbf144d, 0x2c727c07,
-	0x1fbf49ce, 0x4cdb3478, 0xa5a3b3f1, 0x8a7bfbbf, 0xd16b7cbb, 0xc70bb8f1,
-	0xeb4e7ab3, 0x6f184e70, 0xee8b855d, 0x47e036a5, 0xeeffa114, 0xffbe8932,
-	0x040e1b34, 0x3a5445ef, 0xf169f537, 0x65ff0f59, 0x1ddff195, 0x617f42c8,
-	0xa4e88b8c, 0x2273ef42, 0x4fba373e, 0x571e5f91, 0x871beed8, 0x7af18071,
-	0x14fbbe26, 0x3bac4534, 0xe0426f0e, 0x44895379, 0x0a1a73df, 0x86e5d1bf,
-	0xa32fae54, 0x3475ffeb, 0xdd1b83d7, 0x773ce8db, 0x50b2ba3b, 0xf913efaf,
-	0x2964b310, 0x285fbf48, 0x1cb1dd77, 0x65915bf6, 0xc011bb1f, 0x6853a32d,
-	0x4f4afbfd, 0xd8f81c53, 0x21c65785, 0x76b31dfd, 0x79ce305a, 0x53dfc9cc,
-	0xf9951387, 0xf29db77b, 0xa4f2312d, 0xe958f2d5, 0x95fdfa22, 0xef7cfc7f,
-	0xdf7cd1da, 0x0af5524c, 0xfb815b8c, 0xdef9424d, 0xc3f902b2, 0xfc83b998,
-	0xaa73e8cc, 0x88b35f70, 0xfc64f3de, 0xb6bf4f7b, 0x3f782c86, 0x0267ed1c,
-	0xff426c7d, 0x3d04f778, 0x5eadaf7d, 0xe782e7e6, 0x1fa4e788, 0x997e13a3,
-	0x65667c76, 0xc0fa633e, 0xde1d6079, 0xf13ad0d7, 0xadefaa3e, 0xf86292bf,
-	0xc9d683b5, 0xf9589efc, 0xcdcfd1b0, 0x9a20b276, 0x1615b386, 0x709fa176,
-	0x99c69f30, 0xcce3e56d, 0x9b7c7112, 0x1759ffa0, 0x81df9475, 0xcf80d6f4,
-	0x7927cc95, 0x50f5cc72, 0xb7ac1d57, 0x41c6ce1e, 0x569346fe, 0x5b39090e,
-	0xf745525f, 0x07dcc7bd, 0xbfbea3c6, 0xe1e574be, 0x9fc22732, 0xb74154d4,
-	0xd52fa529, 0x945a5d20, 0x4c2f8a2e, 0x5d74cb76, 0x36b97d78, 0x17afd14e,
-	0xb44bf4a3, 0x928fa8be, 0x54f7113b, 0xf9c4434e, 0x4b9f72cf, 0xab83a488,
-	0x2f1ccbc7, 0xd67baf7e, 0x1da71e05, 0xe9f7978c, 0x7803a573, 0xd8ef3e89,
-	0xa73e8978, 0xeaad3c01, 0x8c1dcbaa, 0xbf6f155f, 0x1ac9792e, 0x8d1be799,
-	0xaf8a1fb7, 0x4156d1e6, 0x579e5caf, 0x3b7dbe08, 0xb771443b, 0xeff94bb7,
-	0xff731d4b, 0xb3bfe296, 0x0d63a858, 0xcbe045ca, 0xe8f94239, 0x344ce423,
-	0xf4f8061e, 0xbf2e283f, 0x28b7f3fb, 0x21caaa2e, 0xea25f213, 0xea1fc113,
-	0x1f9099b9, 0xf02f6f91, 0x2d5e87ef, 0x457ca87f, 0x383f21eb, 0x1fcc8fa4,
-	0x5fc5dffc, 0x18cd717b, 0x52167617, 0xd1cab83c, 0xac7bc7a5, 0x3dd250c9,
-	0xd27f8892, 0xf5919c3a, 0x591c6e3c, 0xa12f714f, 0xa6b8d4f7, 0xbb3ebeda,
-	0x5518412b, 0xc24d47a4, 0xc4fd51de, 0x64538e7d, 0x54faaa7f, 0x57fef716,
-	0x08f74fab, 0xfb543a7d, 0x79bb73de, 0x43cbe7dc, 0x1c800f3d, 0xa46f9c9f,
-	0x0e4cb8ef, 0xa3dfcc3f, 0xfe498470, 0x9137746f, 0x69fb0c1f, 0xe604a346,
-	0xf3e64475, 0xf3bee5a9, 0xefd60a6d, 0x0af4bb95, 0x16ff07f5, 0x568603e0,
-	0x0d869dfa, 0x137d738f, 0xd651f457, 0xba83dee5, 0xe6994fb3, 0x61efc24a,
-	0xdf835f6f, 0x8c2a0b01, 0xb598ebbe, 0xee458bb4, 0xdc31a5f7, 0xff9c9daf,
-	0x68071dd6, 0x69ea1fdd, 0x035768dd, 0x9d964f9d, 0xcfe7050e, 0xfd23dbf6,
-	0xf7d97dec, 0xb7009dda, 0x086c697c, 0xa3c37ad1, 0xecf3017e, 0x078d5733,
-	0x73ed8d4b, 0x0bf5181f, 0x7346c7c0, 0xa3cc04d5, 0xdbdfb6ac, 0xdae51f3e,
-	0x60265bd9, 0xbcec1bfc, 0x83b7d456, 0xcdb7dff6, 0x5d3bbf8c, 0xd69f78ed,
-	0xabafa231, 0x5abfbf06, 0x48f7e0ed, 0x87bed1be, 0x7b404cc6, 0x73c1ec39,
-	0x0c9f344f, 0x164cdd22, 0x2f1765eb, 0xbd41fc51, 0x9e73d997, 0xf8ff47d3,
-	0x8fb80f40, 0x455cbf6b, 0x7db922f7, 0xa026f9ba, 0x3c7d75d5, 0xf1db0c7f,
-	0xbf58e07b, 0x001d8628, 0x4be75cf3, 0xcaebf3c6, 0xde8637ba, 0x36fbedcd,
-	0xf6e783e0, 0x44bc7064, 0xc31e6fb7, 0xafb882ed, 0x9272cfde, 0x7ff5c03d,
-	0xf312c0b0, 0xa9b7553b, 0x3b1ad2fa, 0x552d450f, 0x23daa579, 0x21b35f80,
-	0xc69bbf02, 0x7cfdff70, 0xf103a7a9, 0x7fe77df7, 0xe50b710a, 0xf6cf52f1,
-	0xae91c331, 0x97ad5f04, 0xee01c663, 0xc5a3f31c, 0x13416e2b, 0x73beabef,
-	0x86e96fe9, 0x7441dba6, 0xf8e95065, 0xffe3a221, 0xe27bf48b, 0x20efd0fb,
-	0x14fe7479, 0xd347c3dd, 0x03bf4ab1, 0x9be6c874, 0x79e80692, 0x7ec1ba28,
-	0xe806928b, 0xfb7ea87a, 0x931fbfce, 0xe9c607de, 0xabdd2cbd, 0xd059b7f4,
-	0x540f7a91, 0xfd79ce29, 0xfeec8cd7, 0xf5463da3, 0x7e35c677, 0xca3fe811,
-	0x72b0aea3, 0x37b47fb9, 0x3d19fb97, 0x9a9fba66, 0xbe295ee9, 0x235d0dbb,
-	0xf211adc6, 0x75dba67e, 0xeaaf3959, 0xfddf550b, 0x43777c4f, 0x00800098,
-	0x00000000, 0x00088b1f, 0x00000000, 0x7dedff00, 0xc754740b, 0xeebd6095,
-	0x91a93fd7, 0x16883e9e, 0xc085a092, 0xeb404616, 0x7d3d05ff, 0xa71f3210,
-	0x900b18c1, 0x04e08b4c, 0x60dd491b, 0x9e3d90e2, 0x123231a1, 0x1f62cd9f,
-	0xbd6678cc, 0x8c030d39, 0xc077b19d, 0x0b611c56, 0x3837e2dc, 0x71c6ec4b,
-	0x3c4c9c18, 0x6c0843c2, 0xc718d36c, 0xbc4ab243, 0x0f7adef7, 0x0b756bf5,
-	0xcceb43db, 0x40e75764, 0xaabd5ea9, 0xfeeb75ba, 0x7ad3d56f, 0xcecc6333,
-	0x53f817d8, 0x08acbc3d, 0x65cb191a, 0xfc05f3f4, 0xebf2e2db, 0xdf632b25,
-	0xb4cbeeb9, 0x2c93f943, 0x1e670adf, 0x355faf63, 0xb188acca, 0xf6e3a9ae,
-	0xfa87b3ea, 0x8c08758f, 0x127b4315, 0xef768674, 0x0077c154, 0x27d1311e,
-	0x7d1e9d2e, 0xfd4c9fde, 0x8795cdae, 0x9d32fab3, 0xaf7a6863, 0x59b18d3e,
-	0xca0e9bf8, 0x332d9320, 0x5aedcca0, 0xcca012c7, 0x9636f92c, 0xb12e624c,
-	0xf2933184, 0x6bcae99e, 0x39f015df, 0xfe831993, 0x56f595eb, 0x0d5d7f30,
-	0xcccf31c0, 0x3889f1bc, 0xc9c9d37a, 0x97cd5ed0, 0xd769e30a, 0xfe9fde1d,
-	0xe4f329a5, 0x572e3630, 0xfbcdf5a0, 0xf04cf98c, 0xeb6e756b, 0xe7033602,
-	0xd1cc7187, 0x1e60a9c7, 0x1d01e999, 0x2adb5ee5, 0xaa6b3fe8, 0xafe5e1c9,
-	0x6cdef84b, 0x3e1bdfc6, 0x4ac67ace, 0xe2d9c686, 0x54fac809, 0x4c498ec6,
-	0x6f5b2fe9, 0xf8e767c1, 0xb2857ac3, 0xcd6e533e, 0xebcbc455, 0x07e1c792,
-	0x860f6778, 0xcb1d6f8d, 0x55633a58, 0x8b9f699f, 0x387d6d0e, 0x58fb305c,
-	0x5f4fe5fa, 0x33467cc0, 0x5d398fc7, 0x5d79f847, 0x3e90fa32, 0xeed4ae2a,
-	0x4b189362, 0xfc87ec96, 0x992adcf0, 0x36053e1d, 0x7e53f633, 0x0402b8af,
-	0xc29fed04, 0x738014bf, 0x5aef6e9b, 0x16ddd027, 0xa21f4c6c, 0x4c0b2597,
-	0x2e96381a, 0x9bd4d449, 0xea69c79a, 0xd44f57cb, 0xdb736fec, 0x43fa9add,
-	0xea6a661b, 0x354a27ae, 0xd59d55f5, 0xef56f19a, 0xff69ab9c, 0x686feed6,
-	0x7f9e6bea, 0x747f5350, 0xe911caff, 0x885f1a22, 0x89e991b6, 0xd23b0579,
-	0x3a4d88bf, 0x9cc5cffc, 0xf7f7a3d3, 0x7ec27f21, 0xb7af6ebd, 0xd5fe82ad,
-	0xe78d3f57, 0xc5f4b4fd, 0xf90072bc, 0x17d956a3, 0x402bc798, 0xad528d7b,
-	0xf445be95, 0x4536635e, 0xee951be4, 0x11560ab6, 0xda66afc7, 0x6db0aafd,
-	0x7e47aebd, 0xebd01a2e, 0x3759be61, 0x2157fcb5, 0xc706fc35, 0xc7afcc67,
-	0xa5cb84f5, 0x9318eeff, 0x609e397a, 0xfc017fb5, 0x8cc9acc4, 0xa3c74795,
-	0x5db7a74a, 0x6f5f6337, 0xeafccadd, 0xa0582b7a, 0xda3ee90e, 0xfc3b67ba,
-	0x516b927a, 0x5ebe1dd6, 0x6feffe15, 0xef815f86, 0xf323ff5f, 0xdb1013ed,
-	0xe6fc88b2, 0xcfeb5ddf, 0x02402bb5, 0x7a1527bc, 0x278291a8, 0x0e908b12,
-	0x83650398, 0x51f99071, 0xc133d40e, 0x9652846f, 0x38af041c, 0x3034ef68,
-	0x7e71eb2a, 0xa6861071, 0x35eb45d2, 0x288dca0e, 0xa92c456f, 0xebc79cee,
-	0x875e068e, 0xd52ea8f7, 0x3ee7baf2, 0xea92875e, 0x43af275e, 0x5aefaa3f,
-	0xb8cef58c, 0x014489c0, 0x5825beeb, 0x5a1e0e37, 0x05ff4bca, 0xe4994a81,
-	0x5de83896, 0xec7ea7a7, 0x3707af22, 0xf2d0fa71, 0xf65e3183, 0x5f19b3f9,
-	0x813f3c3d, 0xfdc24dbf, 0x006fd75c, 0x828ad43c, 0xd5ef0ec3, 0x3f87320c,
-	0xe4d5f715, 0xe097d990, 0x3133a033, 0x8ccf886d, 0x4ab1982c, 0x0f793e20,
-	0xedcaadf1, 0xe968e3e1, 0x5af51eab, 0xfc3bec01, 0xe51931be, 0xfaa7a730,
-	0x2c12e0b2, 0xd013f9f1, 0xfc327b3e, 0x1f4e1e4b, 0x32a25c2a, 0x5fb5a55f,
-	0x32b6aa8f, 0x59b72618, 0x8559d117, 0xd92c9d79, 0x716dcb87, 0x2e2fe550,
-	0x56e1c22f, 0x1f39ade5, 0xfb1a6cf8, 0xb9967c3a, 0xaeb36a0a, 0xd9f0abbe,
-	0x933e30ba, 0x8496f7ad, 0x321019f0, 0xb7d9f0d3, 0x276e9e89, 0x83094e5f,
-	0x4f182675, 0x23e80cf6, 0xc05499ca, 0x3e244243, 0xb21bfb9b, 0x97c8a21f,
-	0x5817f037, 0x987e6e67, 0x5cf4519c, 0xfee7aab5, 0xdda2b3a8, 0x117a67e2,
-	0xc87c70cb, 0xd2313b2c, 0xbe3cb573, 0x6bba0609, 0x90f80ea8, 0x63be810f,
-	0x06dc151f, 0xcec99bcf, 0x805ab862, 0x31e2aac7, 0x71ad6e8c, 0xec909d2f,
-	0xecf505bc, 0x4e6e8518, 0xdf11a766, 0xc7bd76c3, 0xb59de442, 0x01f1cbe8,
-	0xc70937cd, 0xbf226673, 0xc6db40d5, 0x33fde182, 0x99f00fb1, 0x3e7cc835,
-	0x08eacf78, 0x46af5808, 0xf48d9efd, 0xfe51eacf, 0xe8095f57, 0xe5a5ea25,
-	0x00745b97, 0xa4013fbf, 0x517c8b57, 0x642e9c30, 0x7ee3d3e6, 0xaffdd57c,
-	0x90341fb6, 0xffdb0ebc, 0xcfb0419a, 0xd5394e00, 0x1afa20e4, 0xc8cf6464,
-	0x48c7c14e, 0xbc21acbe, 0xade3f6a8, 0x176826f6, 0x622e91e8, 0xf640b37b,
-	0xb36ca7d0, 0xf305f381, 0x867a55fa, 0x30afcbe7, 0x34ed1139, 0x7ed4f3cb,
-	0xfa23136c, 0x3c97b6a8, 0xb8476755, 0x44cc7606, 0x0abd24b8, 0xc7153f97,
-	0x70e260bd, 0x7f08daf9, 0xe4fe0ad5, 0x43331d41, 0x694fbfbb, 0xff5fa30f,
-	0xfcd3b720, 0x702bc44f, 0x43f0c8dd, 0x4ed007bf, 0xe5689306, 0x43ff03dd,
-	0x69dcf784, 0x01df3f77, 0xf028ae5d, 0x6e856ffc, 0x5124da3f, 0xf5cd3eb9,
-	0xc7a07cfd, 0x7c6e917f, 0x0fc866e2, 0xd5f74439, 0x9027cff6, 0xd9f1521e,
-	0x10f48637, 0xe8f84dc2, 0xdb8344b3, 0x387510aa, 0xe5bf0abc, 0x2a57c88c,
-	0x577c2a9c, 0x0bab7a7c, 0xe7b37bc6, 0xf61c135f, 0x454bf821, 0xfb847ee7,
-	0x674fc1cd, 0x92ef88b8, 0x34667635, 0xfc5266f9, 0x964ca488, 0x3ea2a62b,
-	0x85cc7388, 0x74cb8c75, 0x364cbad1, 0x02fd1da3, 0xf393274b, 0x82734860,
-	0xf7f08ccf, 0xd2ec37a7, 0xa9d6fb43, 0xfbc13322, 0x36bcb35b, 0x09fea75a,
-	0x9399eb86, 0xd60361e9, 0x6577f3e8, 0x9c11293e, 0xbf475083, 0xa2f1c6c7,
-	0xf8f4689f, 0xc75fb9e0, 0xc10a1cd6, 0xee02c1cb, 0xe7cd9d8f, 0x1e17dae5,
-	0x842976d9, 0xad0fda3f, 0xbdddd4d3, 0x2976dbdf, 0x106ede54, 0x3697dc44,
-	0xd9db8e85, 0x5ff404c0, 0xe13b455a, 0x903743a1, 0x2c6bf586, 0xae0a7e78,
-	0x008fe70f, 0x5be73fff, 0xd2ff3d62, 0x8ff650a9, 0xff69fee1, 0x0df91f24,
-	0x2b1ffcea, 0x5f38ffeb, 0xa6387317, 0xb3ba1e01, 0x9f70c5bf, 0x3f7c6c6a,
-	0x7a72504d, 0xf54372e6, 0x739e8677, 0x3ea55179, 0x73de3a0f, 0x1ce91d12,
-	0x994c76a8, 0x7de911f6, 0x71bbd227, 0x48b5bea8, 0xf08be8d7, 0x220573fe,
-	0x16c07bc1, 0xa15b3db9, 0x5c139d97, 0xdfe8d9dd, 0x6c73ab3f, 0xcbce2586,
-	0xe51e3adc, 0x7adb56fd, 0xe2e653a2, 0x38c058eb, 0xf4cbcebf, 0xd1e81978,
-	0x82b7fe79, 0x8dd62a42, 0xf886c2cc, 0xe70bf557, 0x01d13e89, 0xd7f2bbfd,
-	0x5ddd7199, 0x1c66f5b6, 0x82d684cf, 0xea3c386e, 0xe6ec0fba, 0xf4cbcef3,
-	0xb2e9e089, 0xc57bb9b9, 0xa33fa801, 0xee5e7bac, 0x6aaf6a3a, 0x09149ff4,
-	0x4367e07f, 0xf568e8dd, 0x87263ce2, 0x3ac246bd, 0xb2c66c73, 0xec89784f,
-	0x0dbf5513, 0x9dad4fe9, 0x91bafa72, 0x15d763e4, 0xf244cf9d, 0x07305e53,
-	0xbcaf9fde, 0x7b720d6d, 0xa3bf6bbe, 0x1cf7c45f, 0xf3e3f902, 0x764dbf73,
-	0x2e77359d, 0x56b3e7b7, 0x98549179, 0x3fa1f04f, 0x5bc54f31, 0x195f569e,
-	0xa0b7171d, 0xd4de30fa, 0x2c59d1ea, 0x2abe90c0, 0x70f3fcc2, 0x40bb3b7d,
-	0x5972d7b1, 0x2d2bda31, 0xc863df26, 0x420d960f, 0xe2a1c23a, 0x8e814575,
-	0x7c8620e8, 0x942667b0, 0xb465d95d, 0xd3ccfaaf, 0x5f980417, 0x4366df17,
-	0x8cdbd0be, 0xb31bc47e, 0xa80d1f8a, 0xffc24df3, 0xb7b22533, 0x2f848eb0,
-	0xfc79397d, 0x86c7966e, 0xb032eceb, 0xa7f248a6, 0xfdf380b6, 0x927e5907,
-	0x8ddad10f, 0x7bd2041b, 0x66377caa, 0xc237d932, 0x5c8cdb78, 0xd25f80ce,
-	0x3ebf402b, 0xffa017a4, 0xf7b35a17, 0x7ba205e9, 0xadf1e519, 0x12efb152,
-	0xfe1fb90b, 0xca898166, 0x547eca93, 0xc336717f, 0xaffc8235, 0x8430f2aa,
-	0xc7ca94df, 0xf1f26533, 0x732f224c, 0x2e3f7195, 0x5cdc7ce2, 0x5fb97b14,
-	0xfb7a339a, 0x8d7a4b1c, 0x90285287, 0x98dd79e8, 0xc52e4987, 0xa3396f12,
-	0x5da33788, 0xa7073fa1, 0x73fdb513, 0xaaffde45, 0xb274e620, 0xe51472b4,
-	0xa4e92c41, 0xde83cfe2, 0x79ff97cf, 0x68da47ec, 0x99a3e3ae, 0xe042d4f2,
-	0x2e9cbf93, 0x96e583df, 0xbbdb23d7, 0x772f63f3, 0x72801ed3, 0x37df04f1,
-	0x79b3e923, 0xfb97b185, 0x48bed14b, 0xf845f6e1, 0x3d15cbfc, 0xd2794b14,
-	0x11b36504, 0xff011fd6, 0xfcc28e8f, 0xef5073cb, 0xe5817b72, 0x0fa4b99e,
-	0x67e1dfb1, 0x3ec42eb2, 0x1c147b06, 0x0543b441, 0xeddd9239, 0x2d7efd8d,
-	0x643f487d, 0x5c61ccaf, 0x2ff3a81f, 0x7af8e12c, 0xb0e0147a, 0x25eade00,
-	0xc29baf6e, 0xbfcb50e0, 0x7dbd8c2d, 0xe043e92a, 0x1fbb0548, 0x444205cb,
-	0xd0a7af7b, 0x1a7e7318, 0xe2d9780b, 0xe4918d60, 0xefd8c9c9, 0xca0d9a4b,
-	0xd3cee9aa, 0x4b96d728, 0x5c60e787, 0x1ff8fbf9, 0x79d21be6, 0xc1a561be,
-	0xaeff45e5, 0xbc3bb24b, 0xac478c76, 0x7ccafaa2, 0x52af43bb, 0x94dfb63e,
-	0x6c05db7c, 0xe57d51d7, 0xda1f24ef, 0xd617dfc3, 0xf1c6c99d, 0xfb1deb36,
-	0x959dc618, 0xe78d837c, 0x9e36ac1b, 0x3c6d109f, 0x29b560ef, 0xcf1b0779,
-	0x4a6d583b, 0xf3c6c1de, 0x929b560e, 0xbcf1b077, 0xe4a6d583, 0xef3c6c1d,
-	0x7929b560, 0x3bcf1b07, 0xde6a6d58, 0x1538d3c1, 0x9e3691e3, 0x78dab077,
-	0xe36ac1de, 0x97980779, 0x3c6c1de7, 0xf17000ef, 0x722d83bc, 0x943ac1de,
-	0xf1ff2077, 0x67a49618, 0x547f5fb8, 0x7b06cfa9, 0x786334dd, 0xe76ab55e,
-	0x17182dfe, 0xfc7209ab, 0x5e783955, 0x77b414d9, 0x457e300a, 0x04dfb066,
-	0x114565fe, 0xb0d5f0c3, 0x13f3c3f9, 0xbde7d9dd, 0xb0a3fa02, 0x03bc2997,
-	0x18ea29e5, 0xfe7c3f7f, 0x3b577161, 0x65d6e78f, 0x3bf08b7e, 0x78482cbb,
-	0x8718e7c3, 0x13f253ad, 0xffad56b5, 0xb2e67f2a, 0x995f71f9, 0xf80899d4,
-	0xbb6d4590, 0x8c2ff988, 0xd7f15ebb, 0x6ab7dc61, 0x15771b50, 0xb8d41b33,
-	0x844bcf3c, 0xe1df39c1, 0x6b045f1c, 0x2a7f016a, 0xc1cfe601, 0x53ae15a4,
-	0xa45e7c12, 0x881bddb7, 0x453bbcbe, 0xaa6814c7, 0x9e606404, 0x6a2012a5,
-	0xc654d286, 0xf24cd2ac, 0xfe9d389b, 0xf1bdd4d7, 0x030f28d9, 0x6c04467a,
-	0xf9a83c23, 0xbf580485, 0x2bfc8334, 0x332aeff2, 0x3a47bffd, 0xcc82eb50,
-	0x5d8238f3, 0x2f80cd62, 0x5c266ef9, 0xceab9336, 0x45eb6f90, 0x73c335e6,
-	0x9b37e941, 0x2d4e2905, 0x76f28933, 0x6541ccb5, 0x695774d1, 0xcea3f011,
-	0x7ae175ec, 0x0966ecaa, 0xee3d85f9, 0xf148db3c, 0x32e97ae4, 0xf60049e0,
-	0x48da62f8, 0x2ec88a76, 0x451cf8ab, 0x2f1f48bb, 0xadc92278, 0x61ebd88a,
-	0x0a2a83b2, 0x2dc7c919, 0x7cfcb22c, 0xcfcb84ac, 0xdf5d4b37, 0xfbd73c44,
-	0x878fd516, 0xd0be8f2e, 0x6d9b794a, 0x5bc2f161, 0x6f628afd, 0x90e72447,
-	0xe901b93d, 0x8f04f17a, 0x1688e10d, 0xf62a78c7, 0x1b49ecf0, 0x767baec1,
-	0xd45aec14, 0x2aecb743, 0xfa9399fb, 0xb1ca3b50, 0xd0ba4f0e, 0x9092baef,
-	0xc3ddaa38, 0x8d67143c, 0x6979af1c, 0x9920e214, 0xfe13bfa8, 0xea639d0b,
-	0x87fb023a, 0x54bcfbe5, 0x428ef8e1, 0x634be387, 0xa0d317cf, 0x613e27d4,
-	0x771b8d0b, 0x970e0459, 0xf5c0d041, 0xfdff62b9, 0x78f624a0, 0x7d72812a,
-	0xf22efca9, 0xf974d561, 0x7caa5867, 0xbae1df3b, 0x2d29fc40, 0xf9024faa,
-	0x767f66bc, 0x0689ea01, 0x2ae35edb, 0x52d5f780, 0x3a22fdf9, 0x5b1ff46f,
-	0x1eb16e1e, 0xf7bc478f, 0xa3cb22b9, 0xc50911bb, 0x28de4fe4, 0x67e4fee2,
-	0xfe288784, 0x638bafe4, 0xea7b2fbe, 0xc9fc8673, 0x5b1ffe70, 0x639de3cc,
-	0x068e0147, 0xf1465728, 0xc28ca6eb, 0xbf5a8dfc, 0x443ebf6e, 0x854110ce,
-	0xdc6c69e6, 0xfc1163af, 0xba35973d, 0x147b37bf, 0xf310b1d6, 0xf591b571,
-	0x31c57dda, 0x7e96aff7, 0x3307ca03, 0xd0a9fd5b, 0x6f30bcc4, 0xb2be50da,
-	0x0fafd5c9, 0x383f738d, 0xe537e0e1, 0xb37e7008, 0xf272e638, 0xf91e9c7c,
-	0xe119bd75, 0x7e066ae9, 0x255fb08d, 0x9bffdc25, 0x9611e13b, 0x3a637688,
-	0xe411f743, 0x3637cf09, 0x83637e29, 0x2a767fa2, 0x2c53d472, 0xe52ce952,
-	0xe851b9f5, 0xfbcad7fa, 0xb69c4a8d, 0x2bf26251, 0xec7ff491, 0x38fce6e9,
-	0x71c6e728, 0xf30def38, 0xf453dfcf, 0xd3d89ec4, 0xa00c9ecf, 0x91b5b993,
-	0xf63075f1, 0x0274b174, 0xf6d4bfcc, 0xf8901cf4, 0x0d9b2fb0, 0x2e9c5f94,
-	0xef0c58bf, 0x57c28b6d, 0x69782b9f, 0xb03a3e86, 0x34a05bfb, 0x9010f942,
-	0xfa405481, 0x6fec55ed, 0x14308e01, 0xf1de0420, 0x3af4e7e8, 0xce7c1ee4,
-	0x7fe46d5c, 0xca1bc884, 0x3999569f, 0x83a774df, 0x0efe88ff, 0x9339d333,
-	0x9fcf20ae, 0xfcf26576, 0x6a3c3868, 0x456ff4fe, 0x71cf198f, 0xc4166577,
-	0xebddf285, 0x6f26989b, 0xe78575dc, 0x8a4fc185, 0xc949fad3, 0x8f8527e4,
-	0x74b9909f, 0x247fa85e, 0x021fdcc8, 0x5c50267f, 0xa917e43c, 0x7c98cffe,
-	0x7ff15cf9, 0xcd1dfd02, 0x4947119f, 0x07308b0f, 0x74ddff3e, 0x8f10dff9,
-	0x1fd3d023, 0x9fd3d0a3, 0x347fdfb0, 0x11cc627a, 0xf0cc68b7, 0x1eb2bb71,
-	0x708eb5b7, 0xd321203f, 0x54ce9119, 0x9b7a02fa, 0xe8763250, 0xb4f3217d,
-	0x4b136f4a, 0xbd3ebf8a, 0xf0bec05d, 0xafe1acef, 0xd149d6ec, 0x7ab59dfb,
-	0xfa0f28cc, 0xf19bd732, 0x99d4c49e, 0x6bce072e, 0x006c9911, 0x3e5cbb38,
-	0x007b9e33, 0x64bf2f3b, 0xcdc1bc84, 0x7e3f2e22, 0xdcffecad, 0x2aff9c09,
-	0x7dbe0b96, 0x6c4d7fc0, 0x4df70197, 0x4958ff7d, 0x7b88fdec, 0x35ee4872,
-	0xf7208c96, 0xe2f8565e, 0x2b5f0573, 0xe729d6da, 0xfb445899, 0xfdec5567,
-	0x942b348c, 0x45d75273, 0x745be3a4, 0x2285e787, 0xe21467ac, 0xe4c7e7e0,
-	0xcd4c3ce0, 0xfc406d2b, 0xf1c4563e, 0x7dfecd17, 0xb3fc146a, 0x4ad70089,
-	0xfd0199f6, 0xc7ff5969, 0x11e748ac, 0x39d9158e, 0x0390069c, 0x5995df80,
-	0xfc31b7ba, 0xb5a495d9, 0x67f7d487, 0x67aefe2b, 0x5267e414, 0xf1c3ce0e,
-	0x4c0e7e1a, 0x3ec5cf2d, 0x88b4b01e, 0x80ffb9fb, 0x73fc0efc, 0xe358a4a8,
-	0x64a8fee7, 0xb5f73f64, 0x1adc8f7f, 0xcba8e850, 0x7d9ed911, 0x40fbf621,
-	0xdd60e0e7, 0xb9157cef, 0xaa6f6e11, 0xdbd89ee5, 0x7a59697b, 0xd1c3879c,
-	0x24e7b4c8, 0x28dff16e, 0x8f5d2de0, 0x77e968f3, 0x5ffae325, 0x1a58c385,
-	0xe78c73f3, 0xff31e867, 0x7d79f9c3, 0x94be2ba9, 0x198f36ec, 0x07d837f5,
-	0xb95f6714, 0xcd1f2539, 0x6b67d82a, 0x93be96a9, 0xefa6474a, 0x403bd2e4,
-	0xfc9caadf, 0x534c6117, 0xa899bca8, 0xa5699bc8, 0x29afdfb1, 0x8e48af18,
-	0x632baf2c, 0x73dbe71f, 0x79744e77, 0xfb379eac, 0x4f1b4147, 0x8f25bd6e,
-	0x69474e63, 0x7921faa9, 0x7087eaac, 0x5e868d3c, 0x0bd10c48, 0xcce4510d,
-	0x3631c068, 0x9db51f04, 0x98afe502, 0xc0a6f98d, 0x39d89daf, 0x96c7dee4,
-	0x4f138851, 0xc87f8d0f, 0xa047af60, 0xb1a5dde3, 0xbca37fcf, 0xdb7c37e9,
-	0x47f9d236, 0x28c5d5a3, 0x3173623f, 0xb19fec3b, 0xf6f295b3, 0x94ad05c6,
-	0x029d6687, 0xf498fde5, 0xab79f92e, 0x30a7de6c, 0x9e5c367d, 0x5e398d6c,
-	0x97d8728b, 0x28c537f6, 0xf8ebcd7e, 0x37f93a4a, 0x153ca3af, 0xb347ee24,
-	0xf74ecc0d, 0xb97cafa4, 0x202f58fb, 0x9a2f3012, 0x763ee8c4, 0x7ac7e1a7,
-	0x051b47cc, 0xe65cfe3e, 0x974ff9e7, 0xf0a3fc77, 0x31a0e59e, 0x7f543b7f,
-	0xfb4d9a51, 0xcfe569de, 0xf39bf6bb, 0x9ea5849f, 0xc19e15b6, 0xa753e1f3,
-	0xec1c5327, 0x6b8f03c5, 0xbc5aecec, 0xdf7e80c7, 0x7e861e0b, 0x35d329a2,
-	0x9c3b2471, 0xae927f31, 0xa89a508c, 0xfa5e7a94, 0xf86d9d05, 0xf7f73bfb,
-	0xbd67e848, 0x724cc078, 0x9e81ea7f, 0xe32155f8, 0x3e719627, 0xfe3d06b6,
-	0x35af0019, 0x093273d3, 0xf92b1def, 0xce799173, 0x632bc2d4, 0x0f9d00a4,
-	0x6b5791df, 0x2ebba50e, 0x794cd6a9, 0x639d5ce4, 0xfceb1d8a, 0xf4fc431c,
-	0x4082fdda, 0x112edd7e, 0xe19aef50, 0xec7a86ba, 0xc3eb890d, 0x496b53a9,
-	0xe72a75ab, 0x2de4761e, 0xc7ef8039, 0xf1a7af4f, 0x7b64593b, 0xe5c658cc,
-	0x99068bf0, 0x80f17de6, 0x55c8e748, 0x7c69debc, 0x0f30cbd6, 0xa6dea3e0,
-	0xa7d87ba7, 0xe5114e8d, 0x8134e9d0, 0xdf2d82ed, 0xee8578e9, 0x0288ec99,
-	0xb94a2fef, 0xa96cca9f, 0xf7a77f44, 0x748f2e77, 0xbfa55f7e, 0xa96433c9,
-	0x49c0ed0c, 0xff94269e, 0x36e4b6cc, 0xdf24f17c, 0xe68743bf, 0xcffc03cf,
-	0x227fc17d, 0x6b21f70e, 0xf75c78cf, 0x6a76a507, 0x1f0f45bf, 0xb0f442bd,
-	0xe3efc8c5, 0x8e717578, 0x858eb003, 0xcf1101d6, 0x8352184f, 0x2a6de794,
-	0x8b74f2e3, 0x81630fca, 0x7d3de01f, 0xc507bf06, 0xcea9da26, 0x84270726,
-	0x559ea3de, 0x0597aca6, 0xc2f9f132, 0xd83777f8, 0xf6158c1d, 0xb08b37a6,
-	0xef8985fe, 0x7a86c86e, 0x5e78ef49, 0xb3f778cf, 0xb2b1896c, 0x9f5e0cde,
-	0x9367eef6, 0x9bd15ea0, 0x3095ebc9, 0x9bb078d4, 0xbd9ab37a, 0xa4be3879,
-	0x0f15bf19, 0xfd7f1472, 0x45d26f52, 0x28355f8c, 0x031f87eb, 0xfbece3ce,
-	0xe2ef3a47, 0x78fd5b34, 0x86c9832e, 0x3419f8b0, 0x6077dc85, 0xff2409a9,
-	0xf30bfbd4, 0xf63f7f45, 0x84fd99d7, 0x2759bbdf, 0xad8073d9, 0x7e145fdd,
-	0x5c2e7b79, 0xc8d96dee, 0x8c4e785c, 0xef0966b1, 0xd64c0833, 0x78e3c17d,
-	0x855f9c4e, 0x187f9d47, 0xc8b5b05c, 0x3d70439f, 0x70a8e34f, 0x7937cb5d,
-	0x6b7ade51, 0x0427ae59, 0xe084d74f, 0x456c180f, 0x0f1dacda, 0x1b5d3ee1,
-	0x40209c13, 0x1b7cb93d, 0xb1b5dbed, 0x8e081fc1, 0xef81ba90, 0x096f5b63,
-	0x289763ed, 0x9b9d21b7, 0x216ed68c, 0xb8eeb191, 0xe60c1984, 0xe5d631d9,
-	0x406e7bc5, 0xd8ef7477, 0x1c74659b, 0x8beb3800, 0xc7a1f9b4, 0x83fb3a15,
-	0x98e60f22, 0x01ce7976, 0x047bba5d, 0xdc70f786, 0xa88c3783, 0x5df616ff,
-	0xa4be6234, 0x11a2e7a3, 0xeb03bee9, 0xf3c74e30, 0x6ff988c6, 0xbd5eb963,
-	0x91e74a2f, 0x4f1c4bd6, 0x7aeeb2a7, 0xe9e0152a, 0xbdd02d58, 0x9247f5bc,
-	0x7d7d60e6, 0xb192ae2b, 0xe78755e5, 0x38b4b920, 0x72c29ffb, 0x95381b25,
-	0xccb4240a, 0x10f667a5, 0x4d62b93d, 0xe887b33c, 0x8a4f16c9, 0x1772bea6,
-	0x280cceec, 0xfa686637, 0xeafee531, 0x83f43632, 0x949a98e7, 0xdb665c7d,
-	0xeeb8c019, 0x3bc19732, 0xc2de3210, 0x3262cdbe, 0x1c11edc2, 0xcbd28d74,
-	0xe0ad3fcf, 0x1c52842b, 0xf7cf1f7a, 0xefc40af4, 0xba7a6d1d, 0xcbdcd3c7,
-	0x35e6aeed, 0x202ecf82, 0x0dbdf81e, 0xed40af77, 0xeba7deee, 0x1bef1193,
-	0x47000f00, 0x7d84f8da, 0x9347112c, 0x4ad5dce9, 0xdf775605, 0xb38e0339,
-	0xdd023be2, 0x9bbf5567, 0xb2bfc2a0, 0x91ce91a9, 0xa45e7c01, 0x4d9d754f,
-	0x5ce947f6, 0x9789cad5, 0x6187a80d, 0x3406977d, 0x5bd6d4f8, 0xcafada3c,
-	0xd1fada8d, 0xf29ee532, 0xf90d3634, 0x209978e9, 0xb52439e2, 0xf9d651fe,
-	0xe75ef1b7, 0x0a79d16e, 0xe8cdb3e9, 0x7efa819f, 0xbaa2e8b7, 0x3bcf0eda,
-	0xf89df118, 0xb1f100e1, 0xc5b9fc40, 0xf8354b20, 0x8176973d, 0xb60576e8,
-	0x0f67f3ab, 0xfd754fbd, 0x554dfaf0, 0x1b9c5aee, 0x4730bbe8, 0x90ed0905,
-	0x9316517a, 0x222f88f3, 0xbdf9779e, 0xa36f07c2, 0xeeb803f6, 0x7d852242,
-	0x44feebba, 0xbde6179f, 0x3a56cdeb, 0x215776e7, 0xf91d81d0, 0xd6e7475e,
-	0x2f79e3e6, 0x7903ef28, 0x2ef28168, 0x9226a1fd, 0x128d33ef, 0x9ce577c9,
-	0xe42f2a97, 0xb6e7b517, 0x219e67e6, 0xe7beeb3b, 0xb579d276, 0xc17239c9,
-	0x2d0fa8d3, 0x471dfe7c, 0x1866df04, 0x34ef23a7, 0x3271cfc9, 0x61d72f3f,
-	0x2f68e453, 0xfd7551c8, 0x50e3bfb0, 0x692261ae, 0x9bcd1e41, 0x5da9566e,
-	0xf8283926, 0xffe8756b, 0xdde6538e, 0x75a76d5f, 0x487a3da7, 0x316775c0,
-	0xe60166ef, 0x7c3a82bb, 0x55f950ec, 0xf8b5d7ed, 0x565de80b, 0x5b63b5af,
-	0x65e3d745, 0x6dbb5f30, 0x2dcfc8c0, 0x1fa88d06, 0xdef8e0ee, 0xf2c3e348,
-	0x50ee7475, 0x4730fbe2, 0x7680983f, 0x39a3face, 0xf608d8e3, 0xd3acde8d,
-	0x148311c8, 0xf33791a7, 0x67f2b573, 0x772b43a1, 0xa39651be, 0x4f245f69,
-	0xdfdfb4d3, 0x3fa9a858, 0xbcd4ace0, 0x9d5360ff, 0xcdb26ea6, 0xb16fbcd3,
-	0xe3d4d62f, 0xde6b9773, 0xa558e31f, 0xf5bd3769, 0xed0126a3, 0xc077b371,
-	0x06e87805, 0x1e4b28de, 0x12d323d2, 0xe32865e0, 0x2c562d0a, 0x744df3bb,
-	0x3c7bb64e, 0xec4497e8, 0x773a1dff, 0xc97c4e69, 0xdfe5035c, 0xfc5abe0b,
-	0xc9a00e7e, 0x3ddbf685, 0xf0e3684f, 0x5f38abc7, 0xb94365a9, 0x280ac1eb,
-	0x67b05ef3, 0x81e97bf0, 0xcc7f707b, 0x45db8c71, 0x2ec999af, 0x5376899a,
-	0xb071bf88, 0x397e66ba, 0xbe427bf6, 0xf582f917, 0xbc0a6932, 0x3b08cfb7,
-	0x35ee7a8b, 0xebcbf523, 0xe685d01d, 0xce597ff7, 0xceb3c1e5, 0xfc717bda,
-	0xb2d03e8e, 0x7dcf4fc8, 0xaebf4468, 0x013fafa3, 0xe70cd9f5, 0xcfb44687,
-	0x7a2b9e87, 0x61c60c4e, 0x0e1fe39c, 0x63de23e9, 0xa46e5edd, 0x722b4ff1,
-	0x7a3be5bd, 0xf78b4f3a, 0x864a6b37, 0xe1cb73e4, 0x63ef1fa0, 0x7bf3b4b7,
-	0x368e789b, 0xf9069c92, 0xbca861fc, 0xf41d367d, 0x4f1a4cc1, 0x97960fa3,
-	0x3edee9f9, 0xfbcd6fc8, 0x5c34972b, 0xc8257cc5, 0x4cf3ed71, 0xb1961e7e,
-	0x73fa0301, 0xed35d720, 0xfb95cb1b, 0xde58d39c, 0x2e072017, 0xdbdf2338,
-	0x9f8abb7d, 0xaae0b833, 0x16787da3, 0x47e789f0, 0x3f861d9f, 0xe1dbd78e,
-	0x81a465ed, 0x661bfd90, 0xff7157ff, 0x7228e5ea, 0xbfb2a2fb, 0x014084fb,
-	0x33b7550a, 0x8577e88e, 0xa5ed75b9, 0xcf97dc42, 0xdebfa2b7, 0xee8123f2,
-	0xffb2ffc1, 0xac3b34ad, 0x54f878df, 0x7697de1a, 0x86953a1f, 0x0cdb89f7,
-	0xcf68cdf6, 0x3dd07d03, 0x3f5e8ee4, 0xa87edfc1, 0xb79f1fb0, 0x140e0af7,
-	0xeb9eeec9, 0x364eb40d, 0xa3fd15b0, 0x3ae0517d, 0xabedce58, 0x2a76e5c3,
-	0x13982edd, 0xc98f7ef5, 0x1e9013e7, 0x5c213e40, 0x820fc047, 0xe66dbefa,
-	0xd4f648a6, 0x27df0565, 0xde1919b7, 0xfe836dfb, 0x59d38eb8, 0xbdf88da7,
-	0xb0c39685, 0x71d7012e, 0x1c7881ee, 0xa181837f, 0xf7c2a19d, 0x03e05671,
-	0xabfbff5c, 0x2dcf0c0d, 0x27ad596f, 0x81bfbf7c, 0x87fa27db, 0x0335bd7f,
-	0x2e80cbea, 0x270f3bf1, 0x9d38df56, 0xbfbee301, 0x7569db86, 0x2f881b0f,
-	0x6e13ad97, 0xa50e4bdd, 0xff6e956b, 0x70d3a146, 0xdba70dfa, 0xe6baf461,
-	0xdbebd1eb, 0x90ecb7e5, 0x61f7a819, 0x438ce7ff, 0x731efa3a, 0x1a7e401c,
-	0x0718613c, 0x2ada4f70, 0x63c3c039, 0xa7bef5d3, 0x9c6e50d2, 0x6df9ede0,
-	0x7f2e057b, 0x7d71cbec, 0x8646dd19, 0x2a2e08f7, 0xd95176fb, 0x0a0b3b37,
-	0x62cfc8f1, 0xa9ca1260, 0xf9ce256c, 0x1d35818a, 0xe452ff46, 0x8ffa67f2,
-	0x87b77b6d, 0x2b7fefd0, 0xcaab74e7, 0xe64669c5, 0xf7c56c3a, 0x045f8d0f,
-	0xe06cbce3, 0x282735e7, 0x09c94de3, 0x52822c36, 0xe4e5c157, 0xd438156f,
-	0x3e149ffa, 0x437f2760, 0xe6685cf8, 0xd1b79ff8, 0xf8eb8cdf, 0xbd75c999,
-	0x305fde1c, 0xea1b7ce1, 0x3f49eebd, 0xb9dfe3c9, 0xee1d9073, 0xa27ff056,
-	0x63cf37fc, 0x3532cfee, 0x72d7f68e, 0xe90969f4, 0x68a532d9, 0x30f148dc,
-	0xe66ccdf7, 0xbaba014a, 0x5aa54399, 0xaafc745f, 0x82fc8071, 0x2fc40deb,
-	0xb9e9d337, 0x0553efda, 0x8e46e9ee, 0x4a97d607, 0xb6e41b7a, 0x67921658,
-	0xfaa0f150, 0xfb2996e3, 0x5b1ebf69, 0xcfee28c7, 0x8f84d3d8, 0x84e76d15,
-	0x41e71856, 0x02b06c83, 0x3627cfbe, 0x8534bdad, 0x626c9fb1, 0x3a0b05cc,
-	0x5cccc9bb, 0x6c7d0377, 0xd81ea892, 0xbbfaa364, 0x5e54ec9b, 0xa2c738b6,
-	0xa4e079fe, 0xede20a67, 0x671ed644, 0xed73cc2d, 0x41f081ac, 0xfdf4063b,
-	0x376b4298, 0x0cccf4fa, 0x947a37ed, 0xf028adef, 0x8333743f, 0xfcbe40b9,
-	0x8e83e702, 0x467f1bed, 0xe6b1cf72, 0x49fa037a, 0xb7176df9, 0xf1bddd62,
-	0x5f680d77, 0x04fa007c, 0x7eec0ce9, 0x9e501366, 0x81da339c, 0xa66f9a0e,
-	0xeb2f38d0, 0x77c80d82, 0x430263de, 0xf7a0fcfa, 0xd71c71ba, 0xe12d7457,
-	0xe6744df9, 0x48ad2d9f, 0xfbb8fc22, 0x7f7c75f2, 0xf7a1748b, 0xf9effa29,
-	0x87ee0243, 0x9dfda379, 0x467fec4a, 0xb7af90cf, 0xa41306d7, 0x02f87208,
-	0xa3978b8c, 0x86581d70, 0xbd1937b7, 0x413cf053, 0xe1c74293, 0xfa158bed,
-	0x941b4c04, 0x213229ef, 0xc1239f8d, 0x5258169f, 0x41f93262, 0xe7e038fe,
-	0xabbabe96, 0x811e9622, 0xcff5a87d, 0x762187d8, 0xfc3a347c, 0x437e25b2,
-	0x4329c3e6, 0x4323f475, 0x1fa07fef, 0x82fbe919, 0xe3c9aca6, 0xb9778a46,
-	0x83bec007, 0xc300eafd, 0xf4829ec9, 0x4fca8d3e, 0x91d9748e, 0xc171cc7f,
-	0xd82fa83d, 0x3bf23a5d, 0x7b5abdda, 0x87e141a8, 0x7a1ec506, 0x3feb42b4,
-	0x5ed49f81, 0x84a4fdc1, 0x3fe34ce3, 0xff273f85, 0x057c8cc9, 0xfd834ef3,
-	0xfed22579, 0xc7aed554, 0x2ed8137e, 0x740673a2, 0xbe15f48e, 0xe0a8bfce,
-	0xebe5547a, 0x48d7c865, 0xaf9cbdbf, 0xa96dc7c3, 0x1c0bf9aa, 0x7b945b77,
-	0xf157f710, 0x139fdaf1, 0xe7ee5f08, 0x1f4f0852, 0xb59ce7b3, 0x031f9740,
-	0x2e80fb1c, 0xf19d39af, 0x9affd049, 0x6c9f19cb, 0x1d03921d, 0xbf53c5cf,
-	0xa717936d, 0x19fd42b4, 0xef187ba4, 0x8a3ade93, 0x1cf43e6f, 0xbe753fe7,
-	0x52cbfc0f, 0x0d8a9f90, 0xda03a341, 0x262efb33, 0x7c581da0, 0xe414fee4,
-	0x6e7068c3, 0xdce054ad, 0x4bdad8f8, 0xf01e9c29, 0x455aee1c, 0xf49fb9bf,
-	0x6bff111b, 0xdfa23237, 0xd97ed7fe, 0x49fc7c81, 0xfa84bc5f, 0xf1a3e3f0,
-	0xd7ff945e, 0x3a7c998e, 0x6f10fc81, 0x8fb5c822, 0x91f7030d, 0x2f4479bd,
-	0x3ee8ffa1, 0xc83ddbf6, 0x4cd7ee8f, 0xb5b1f968, 0x51d75d7d, 0xddf5b5ef,
-	0xf2c4557b, 0x87e5d1a5, 0xd38f8df6, 0x6ffad57a, 0x28ed9937, 0xb9113f47,
-	0xfbdb589c, 0x6bbfd92a, 0xc0cc6f07, 0x47c7ea38, 0xca094fff, 0x379bf735,
-	0xb99e504a, 0x8251b8df, 0xc71feeed, 0x2dd9227b, 0x84f4b371, 0x665f5557,
-	0xe26a27bf, 0xfa141b45, 0xd5dceec8, 0x57f00938, 0x03896e7c, 0x7b6ab6f3,
-	0x139d14f1, 0x79fe2fdf, 0x21c3ca7d, 0x22033afd, 0xce8a8de5, 0x0eafc7d5,
-	0xaa47cba1, 0x94ef9a0c, 0x0f38d57d, 0x2df7e2b6, 0x0275c56f, 0xec0efa3a,
-	0xbfc880b6, 0xf046bb2f, 0xf601bfa1, 0xb23f784b, 0x923daea7, 0x9910f742,
-	0xbd3f9ce8, 0x1c53eb08, 0x5628eddb, 0x8726a7cc, 0x02cb4bd8, 0xe809bf3a,
-	0xe4cfa9a8, 0x203f7b27, 0x62baa45e, 0xfd743d47, 0x85b26337, 0xdc9a7108,
-	0x1ca0e777, 0xc0d78f0f, 0x5b8418cf, 0xa7ceafb5, 0xa651f8f3, 0x042dd247,
-	0x993b9ab8, 0x161d7884, 0x4b9a69d7, 0xf8f0a2f1, 0xdbb03d8e, 0x93ecfd8c,
-	0xabc21275, 0x8fb8a5da, 0xc0e4113d, 0x7972565f, 0x6757f2a6, 0x3af5e780,
-	0xc9e6b503, 0x69577e50, 0xcc7491ef, 0xece9780b, 0xc600ffbb, 0x1f073a17,
-	0xf30e9f8c, 0x98b7be74, 0x9ae79e61, 0x829e6b54, 0x9ae706fd, 0xa21bc81f,
-	0x1af9f09b, 0x345db92a, 0xd6442f64, 0x5f0aa57f, 0x2c1e968f, 0xd0f3fcac,
-	0x579fe083, 0x7cff7254, 0x709f8f05, 0x7f5c3cff, 0x1d5972a8, 0xef82ad77,
-	0x2af972e1, 0x47e039d9, 0x5b5e5c93, 0x32f7a769, 0x90a516fb, 0x92defd7f,
-	0xf875bb14, 0x43a239f8, 0x7c379c97, 0x739ed57c, 0x6653e57b, 0x3d647bf4,
-	0x897ba7f1, 0x97fcc3e0, 0x9db9ff6a, 0xeee5d902, 0xdf0f8366, 0x2c0ae153,
-	0x07d8f1e1, 0x22cf8364, 0xaa89d90c, 0xddab791d, 0x6abb5021, 0x63f6aa57,
-	0xbbe3c9c0, 0xfb788a4b, 0x556b8b65, 0xa75c58e5, 0x97179e85, 0x398ce7f3,
-	0xf55fa14f, 0x918152e0, 0x4aec501c, 0xedc34e95, 0x72fb4fce, 0x438a4712,
-	0xa7d0af3d, 0xc21367ca, 0x63d543f8, 0x7e7054cf, 0x5e3d40eb, 0xf7fc7a88,
-	0x7c3cfb1a, 0x8fe3d05c, 0x463f5257, 0x2e7e8bfd, 0xebf9233a, 0xadfc6566,
-	0x4e05feea, 0x59bc20d6, 0xfd19b02c, 0xf5fa68cc, 0x139d8a7b, 0xc519fdad,
-	0x3f1dbc7e, 0xc8e4561f, 0xcbf3f168, 0x70f2b795, 0xf9f9a9ff, 0x8c687d96,
-	0xd557bf62, 0x1ffb86bc, 0x6a04f7a7, 0x97feff90, 0xe1eee281, 0xfaa53def,
-	0xecd3229f, 0xa32ca9cf, 0xf723fd0e, 0xe83f1e1a, 0x43bfb24e, 0x7a5bcc7e,
-	0x05ace386, 0xb8ed107f, 0x51266f47, 0x32f686d9, 0x385e2b94, 0x1588f947,
-	0x77f0b46b, 0xfb174c63, 0xf3a6cbaf, 0x9eac2d03, 0x7d2d4ce2, 0x5016d249,
-	0x0f63dd0a, 0xf2be469d, 0x0fdbd01e, 0x88ffbe84, 0xc799befa, 0xfba636e1,
-	0x661af728, 0xc278b40f, 0x7dad7eed, 0x8dc4a950, 0x6f09d9a2, 0x5cb85bf4,
-	0x3e27a339, 0xd378c0ef, 0x7d8cc64c, 0x37b82e5c, 0x474938f2, 0xfc04e6df,
-	0xd2bb6a08, 0x500c457e, 0x6bf28a1c, 0xbed5eaf0, 0x3ee8d3a7, 0x27cdac97,
-	0x39ffefb5, 0xbcf0cbc9, 0x970f7252, 0xbd36ee4b, 0xa12a4792, 0x83b797ef,
-	0xed0e393f, 0x1bfdbb4b, 0x8b807788, 0xc8de48f9, 0x3ecbb89a, 0xe9f4af25,
-	0x3f257f99, 0x2891c574, 0x79eea479, 0x7ca48f3c, 0x1e787727, 0x0ca9f4e9,
-	0x48f3edfb, 0xe8e7bd1d, 0xf2edcb1e, 0x5baaa649, 0x3b8a1c71, 0x7c79144e,
-	0x209f6277, 0x626abc61, 0xe9775f1f, 0xafb238b6, 0x3ab57e1b, 0xba81e505,
-	0xe22c9f4f, 0xfde4fdf8, 0x5fb06acf, 0xc944afc9, 0xe37aeb02, 0xcb3f0dfd,
-	0xd9bb75e0, 0xc436fd8e, 0xc9f33fa3, 0x23c7d6af, 0x1280df7e, 0x17c7e7f7,
-	0xc9f1c8c4, 0x667578a1, 0x959dc515, 0xfa08b578, 0x5c50cc70, 0x8bdfbc27,
-	0x746e5c55, 0x7142bb83, 0xef3c23cd, 0x9aee9ddf, 0x9ebff547, 0x29dff8c4,
-	0xfd1e2990, 0xc635d02a, 0x62c1a68d, 0x3ffd2f31, 0xe62758e3, 0xbac7ba91,
-	0xf47c427e, 0xf23b3ad7, 0xfca7f411, 0x9db0f793, 0x6a8623f4, 0x0333cf31,
-	0xf7405b3f, 0xdf295231, 0x8fb28f73, 0xa2cfe0e9, 0x2cd0095f, 0x34f43cc1,
-	0x2333df25, 0xfe38898e, 0xfb6b830e, 0xf52fcc54, 0xc4cd8e8b, 0x3c148e04,
-	0x779e196f, 0x2f9e6412, 0x6a4ff357, 0xfe5a3cde, 0x9479c049, 0xf3f056ef,
-	0xf980b296, 0xc4cf3574, 0xf9293a96, 0x43cca5b5, 0x807c42f7, 0xde73afb3,
-	0xcffc846b, 0xf21115c3, 0x982beb3f, 0xf3699f62, 0x5f73db8d, 0xaafd3a21,
-	0x78c3c679, 0xe68ee2ae, 0x0fdcecc5, 0x28bb830d, 0xf234d3e9, 0x6ff8febb,
-	0xfb67a409, 0xbc3e906e, 0x00b13416, 0x78071fc5, 0x40cfbddc, 0xe06b8671,
-	0xd10d8dbf, 0xf054efb3, 0xd5f78f71, 0x04f7fd11, 0xfdf1e3ea, 0xb7cf2bdf,
-	0x7ee4b7bd, 0x01bdf7b4, 0xc60b1dfe, 0x13d63fb8, 0x6ed18b10, 0xf2fb83b9,
-	0xf5846564, 0x7eb8e399, 0x52a3e70a, 0xab4aff85, 0xdeeb9e38, 0x7b987ee7,
-	0x48afcf03, 0x7b705c8a, 0x74fd5e78, 0xc6a09a56, 0xca45c7d3, 0x92091cbf,
-	0x447968de, 0x7cc9efa0, 0x33cbfcd9, 0xf1f391e9, 0x462f7a2b, 0x3634bfce,
-	0x168cfc90, 0x638f0ecf, 0xff2a9dff, 0x7638f3a6, 0xeb44957a, 0xd7e4f64e,
-	0xeb43638c, 0xb0fb83bf, 0x7d845674, 0x6fe383b8, 0xf1db1d9c, 0x3b63caeb,
-	0x1e3113fe, 0xc78c7b7f, 0x6c7961ff, 0x8abaebf3, 0xdbffc2d8, 0x1fdfc318,
-	0x57fffe09, 0xe78407cf, 0x0bcfc3ff, 0x30039f84, 0x17b0f5bd, 0x9d84badb,
-	0xefc33f41, 0x24d6bf8d, 0x93141c80, 0xce7dd3f6, 0x1f3ce505, 0xecdeadb6,
-	0x9d0c2bdb, 0xf5f1501b, 0x23f73568, 0x5eebbca5, 0x04d45efc, 0x829f5039,
-	0xfe72b2f1, 0x59ae4377, 0x898c5e78, 0xc9e63a52, 0xc5f4cde0, 0x5b749760,
-	0x5359e722, 0xe9a2f195, 0x35d58391, 0xe315678b, 0x7c8a3d1f, 0x4a87ff0e,
-	0xe5ea521c, 0x6899e9f7, 0xf34c5f4f, 0x1ed1d3da, 0x9fc93c4a, 0xbc99f827,
-	0x67b2e097, 0xdc7fe62f, 0x7be11b20, 0x26ffc946, 0x1b2bbbcf, 0x60c9d2e3,
-	0xf05e6217, 0x920fcc69, 0x7bd12b3f, 0x66977cea, 0x19ea3f71, 0x9f301303,
-	0xcfca9deb, 0xdf9eb139, 0xe6a6fd91, 0xfc1acef5, 0xca055a97, 0xfc23b5eb,
-	0xf3f9d53f, 0x442b65f6, 0xebcdf80c, 0xf8df2891, 0xe5dff976, 0x9e1e68ba,
-	0xe24c7be7, 0xbf409caf, 0xec78e019, 0xefd12168, 0xffe5e38a, 0xc7fe8cd4,
-	0x3cf09164, 0xe254afcc, 0x78941705, 0x502f1a87, 0xacff5bf3, 0xc03e49c4,
-	0x03940bf8, 0x72810f18, 0x9ddd2cfb, 0x67db4fd6, 0x67ffe045, 0xf21f1e04,
-	0x87c794fe, 0x9c8e8d0a, 0x7f94f3d0, 0x63ef8b35, 0x2fe79fab, 0x0fcf78d4,
-	0x7e14f595, 0xefc7ef4f, 0x9d6e15a1, 0x5f3d446e, 0x0e2b35b8, 0x4fb219cb,
-	0x5ef80697, 0x4eb0fab6, 0x7448bfdd, 0xe75957b4, 0xca4133b6, 0x961abdef,
-	0x8b34bff7, 0xa968679f, 0x097bfbe6, 0xd418a0ff, 0x6e229b1f, 0xb131f341,
-	0xca47d24a, 0x5f80b52b, 0x76b6708c, 0x7c55b873, 0x75edf8b7, 0x53c5cf38,
-	0x1658adc1, 0xa3aec9ac, 0xf5db7bb8, 0xb9bf68ad, 0xae9c6f07, 0xd19978a6,
-	0x43c4fe8e, 0xdbb8da03, 0xfe3cd513, 0xe01a2afe, 0x457bb788, 0xef0b8ff2,
-	0x927e8915, 0xbfe42c5b, 0xde981b26, 0xdc45f58a, 0x4c682a2e, 0x5b3ac3ad,
-	0x60f64492, 0xd27b19c1, 0x714379c3, 0x377be4b0, 0xdd3c458c, 0xc6aacf2e,
-	0xe45b2ed3, 0x5f9fb8e3, 0x7edacf35, 0x6f3a3df6, 0xc54baeaa, 0x8d2f9a8b,
-	0xcf556796, 0x3f1bb83d, 0x70d39cd3, 0x8c06c18b, 0xbd1e163f, 0x5fce5468,
-	0xa1ecb64a, 0x91e16c3c, 0x557f94eb, 0xcf6eadf3, 0xa1abb275, 0xf7fb119f,
-	0xd7f9e26c, 0x2c0e00d7, 0xb2dd617b, 0xdba1ef09, 0x7583eca8, 0x9b63f3e3,
-	0x6ff4a972, 0x7c795072, 0xf8951953, 0x64f4c999, 0xa75edbcc, 0x59d5edbc,
-	0x524dcec3, 0xe8b76f5e, 0x15f108fc, 0x7aa3f792, 0x1f4fde78, 0xee35e3c7,
-	0xbefa0633, 0x99acfba1, 0x5f4d77e4, 0x0ff444eb, 0x9ae73f3e, 0x60777088,
-	0x2e842dde, 0x961d913e, 0x9d83f424, 0xdbe60b0e, 0x1aaffb0a, 0x874c3cf1,
-	0x3c623018, 0xc0cf200c, 0x9eee8b23, 0x6fdcfceb, 0xf1058d5f, 0x58fcdb7b,
-	0x8fcfffef, 0x58fc957d, 0x273f3577, 0x0291caad, 0x8bde4ea7, 0xf2d919e5,
-	0xd89c8870, 0x94f9e4e6, 0x1127936d, 0x4e76ee1f, 0x321d5a4a, 0x8f23675e,
-	0x3bdf245f, 0xfcfa12d9, 0x1f3cd597, 0x67302c96, 0x33567924, 0xc7ddebfb,
-	0xd76e411b, 0x3ffbb244, 0xe5d029f9, 0x238ba04c, 0x90389edf, 0x343f19c7,
-	0x71adb71e, 0x2831c4f5, 0xd8982e9f, 0xd3af1e14, 0x5858e3c4, 0x5c5a2e5e,
-	0x4ea3456e, 0xa179d0b6, 0xdbd404e0, 0x2633f1e1, 0xbd702706, 0xbde0672e,
-	0x83319814, 0xf961b195, 0xdf305fb9, 0xfbc327cf, 0xa4751acb, 0x5d3cd42f,
-	0x36c8a341, 0x6c167d01, 0x3f28f834, 0xa45e28d7, 0xec6fc576, 0x90320a94,
-	0x6b383fce, 0x16ae3094, 0x34731f1e, 0x049eefee, 0x026d1dfd, 0x5dba0bdd,
-	0x073d4f1e, 0x3fdbd2de, 0xf96de307, 0x3d77576c, 0xac9fcff4, 0xf4fcf093,
-	0x3f1e7cf0, 0xd8a05dff, 0x3671e139, 0x4bb433a4, 0x1bf0e3c2, 0x38d83a15,
-	0xd7adeb9b, 0x1d537f14, 0x4e17ed47, 0xcd9d3f3f, 0xb8b46df5, 0xbc6551fe,
-	0x6d82c6ce, 0x177f7193, 0x93ea18e8, 0xf35ac6ce, 0x76f190e4, 0xdbe7e6cc,
-	0x60fcc19e, 0x907e686a, 0xf3c301e7, 0x2b9caa82, 0x037dffec, 0xc8377be2,
-	0x6e63d46b, 0x141fcf1b, 0x8339ab1e, 0x4e086372, 0xc377b7ae, 0xbec8079e,
-	0xbe312473, 0x457bfa2e, 0xc502a3de, 0x7c160ae7, 0xea1e3c76, 0xf74499cc,
-	0x2767dcb0, 0x3ca2b16f, 0xe316205a, 0x53b71ebd, 0xc26795b8, 0xeffdd27c,
-	0xbcefa1ac, 0x7f903e16, 0x81e5f70e, 0x0f9d0366, 0xfddef554, 0xf03534ef,
-	0xc64fbdf6, 0xe0ae7b61, 0x79f1d8b0, 0x763f7d23, 0xfa7e4bfe, 0x110b58bb,
-	0x81e7903a, 0xe44497b3, 0xd716cb9b, 0x151f23df, 0x4cf2522e, 0x3f4f5ccd,
-	0xc0c8b7d0, 0xead3cec8, 0x9f5913cd, 0x46e83c53, 0x8fe5215f, 0x43fcf052,
-	0x29be90de, 0x6c7a0a3c, 0x63d39dcc, 0x112d9d3f, 0x1e82673e, 0x17927843,
-	0xf87d3cf1, 0xf650effe, 0x8a5e9a3f, 0xff518726, 0xde63fbf0, 0x5c36c10c,
-	0xee31db8f, 0x3af68a53, 0xd3a2e394, 0x71661fdf, 0x628a4eba, 0xa149fdcf,
-	0xa7e7a8df, 0xcf27477a, 0x7fd987f4, 0xd563791e, 0x4df352ff, 0xa0f6bfaa,
-	0x65ab0f62, 0xbbfe5293, 0x72a037ef, 0x21bf788d, 0x86fdf239, 0x68090e87,
-	0x1bf7a8a7, 0xcd59194e, 0x4f3c54e1, 0xf277dcab, 0xe93b222d, 0x62fcdfd4,
-	0x78a98beb, 0x509049df, 0x3a1fb51d, 0x1dbe7a47, 0xa7b223ec, 0xe3cb7efa,
-	0xf9f887ad, 0xc8def6f0, 0xaddbdddf, 0x32f5dfd8, 0xaed1b923, 0xe86db79c,
-	0xb744f251, 0x8b8f96e2, 0xb74b71a1, 0x3d56303d, 0x7f23ebc7, 0x8cc71b4f,
-	0x60ecb716, 0xdbb73a41, 0xa07046b1, 0x39ddb87e, 0x79ca5ddc, 0x4c71a8dd,
-	0xb973e479, 0xb94c71e1, 0xb9c79b5a, 0xf7c4966f, 0x680825db, 0xce759aef,
-	0x7fb73a36, 0x9d22904c, 0xcd5a5ef3, 0x257cf4e5, 0xc8d0720f, 0x8560e3e9,
-	0xf06ff740, 0xfbee1e1e, 0x1efc63c1, 0x7e02c1ce, 0x7bcd470f, 0xa66bf7a8,
-	0xe83de50e, 0x2f7a9dfe, 0xc367bd47, 0x5ae08f98, 0x7d1c5cf4, 0xe1876bc7,
-	0xbddb8d90, 0x1a3f7e5e, 0x43e61065, 0x8913cc4d, 0x6bab6b5f, 0xef7a6ac4,
-	0x8f4fdb8e, 0x7bf04754, 0xe91f8a7d, 0x2fea8eae, 0xfad6afac, 0xf70f540b,
-	0xde54ee17, 0xecd98be3, 0x87fbfb4e, 0x9e8f1c63, 0xf1b63b32, 0xfb48ecc4,
-	0xfda2c5b6, 0x5e5aaf1e, 0xb0dfe456, 0xbb0dc5ef, 0x7af5c92f, 0xa7ff60b7,
-	0x1ba7ca4a, 0xcaae9f28, 0x7c31eed5, 0xe3291ffc, 0x294065a9, 0xd77ca3bb,
-	0xbc4a97f9, 0x7b944bac, 0x2f69ee10, 0xd397e368, 0x97e3690f, 0x35937b33,
-	0x78ff7cf5, 0x6785fbcd, 0x8bda6926, 0xda68f703, 0x68142f4b, 0x1503e5ea,
-	0xaf2bf79a, 0xb3ea6ad4, 0x65f8da82, 0x61c5cdf5, 0xb47d38f7, 0xdca01abe,
-	0xe6757ed0, 0xcbde6a6f, 0x575da358, 0xaebb4796, 0xebb51b89, 0xf6cdc752,
-	0xd397d76a, 0x325f5dad, 0xbef2e3e6, 0x7f2e3e7e, 0xc7c95db6, 0xdfb058e5,
-	0x2d938d33, 0xf7a9b768, 0xfef7d5a9, 0x5866372f, 0x007f40df, 0x00000000
-};
-
-static const u32 csem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0xe4b3ff00, 0x51f86066, 0xb97bc10f, 0x726e1818,
-	0x0143f821, 0xd08667cf, 0x0c0c2c6a, 0xc6cc401a, 0xcec0c0c4, 0x717ebc44,
-	0x1d7b044e, 0x4cc30307, 0x31c8de20, 0x481afef0, 0x7e879d7c, 0x42f3a976,
-	0x81c15968, 0x570837f7, 0xb430310a, 0xc430330a, 0x0cf84088, 0x55f2a8a2,
-	0xa9b60842, 0x39766524, 0x0003f502, 0x3471cc24, 0x00000380
-};
-
-static const u32 csem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd554780b, 0x733ef0b5, 0x7993331e,
-	0x0f20f264, 0x0084f102, 0x021842a2, 0x27088784, 0x01a8c421, 0x54bc8083,
-	0x48433c26, 0xbfa81132, 0x2677bd6d, 0xb5ad1104, 0xbc1b6951, 0x14101de8,
-	0xd1a07515, 0x40e81c06, 0xdbdab114, 0xd5a8f8a8, 0x40445076, 0x8bcbc248,
-	0xaf7fd52d, 0xe649cfb5, 0xd4484c9c, 0xffffbff6, 0xdbf3f1fd, 0xd9cfb3ec,
-	0xdaf5ed7b, 0xf6bdad6b, 0x9a32c11e, 0xe4224e24, 0x65a3f85b, 0xf4842784,
-	0x0adb2ce9, 0x64918fda, 0x8b2ffc42, 0x108e36f2, 0xf08e77ee, 0xbc8451a4,
-	0x980b99b5, 0xcfbc3d69, 0x9fad0846, 0x603d34de, 0xff6422ce, 0xef02b308,
-	0x8f9ade9f, 0xbd2fc9f5, 0x7b6814e7, 0x00bc4bd5, 0x13bed375, 0x109d88ce,
-	0xa1e5b9af, 0xf6f3e96b, 0x85b27897, 0x93fc450e, 0x9085244d, 0xfec21663,
-	0x52fab22e, 0x6d56ab2b, 0xf4077fde, 0x2664de5b, 0xd54fda56, 0xaed365ee,
-	0x8765f5a5, 0x54af0244, 0xfa95ab6d, 0x00f2fad2, 0x9afa8417, 0x71c67f7d,
-	0x79480ada, 0x27212870, 0x5f22167d, 0x96ceeb49, 0x79f45994, 0x11676045,
-	0x83b15fbc, 0xfbe89b73, 0x7ff69b15, 0x3457fd0c, 0xda79038a, 0x36ed8aff,
-	0x63610f22, 0x1e604b7f, 0xbc01a64b, 0xc4886f55, 0x97e5eb4c, 0x70044956,
-	0xa54bd424, 0x61ff180e, 0x38c07649, 0x0d1c7087, 0xd0cf559f, 0xd577e871,
-	0x986e702f, 0x7889b55a, 0xddd69e00, 0xda4f39d6, 0xd2b55e61, 0xf77ef860,
-	0xb7bc127d, 0xb2f6502c, 0x36f80655, 0xe700454b, 0xd2d2cda6, 0xadfd9da1,
-	0x0ea6fed8, 0xd90d63ae, 0x76a89ea9, 0x47d27963, 0xacee6c88, 0x04a21057,
-	0x407700ed, 0xf3ac3e9a, 0x812e79f9, 0x3fd0d190, 0x674b644f, 0xc83094ff,
-	0xe8f7fe07, 0xf60f813f, 0xb2db023a, 0xd2b5e93a, 0x772dff45, 0x4bacebd2,
-	0x9ed09fa5, 0x56bfdd17, 0xa074043e, 0x5cfbd4f0, 0x4be23e58, 0x4f8372c3,
-	0xcafdbc46, 0x06cb0437, 0x3f9f1b9f, 0xe58b1be6, 0xe5829f26, 0x2c62be13,
-	0x7c52be03, 0x0e6f8b6f, 0x1e7d5b96, 0xaf94fe7c, 0xbeedcb1c, 0xacfe7c1a,
-	0x772c6eef, 0xfcf8fcf8, 0x2c7adf05, 0x2c7abe83, 0xb01af977, 0xf005f46c,
-	0xdb7d97bd, 0x05f26cb1, 0x5f1ef9f1, 0x5f219613, 0x407dcb18, 0x7d865a5f,
-	0xf01e582d, 0xabe5887d, 0x777e08be, 0xcb1c77d0, 0x3bbc5507, 0x817c9027,
-	0x10a9cde2, 0x92171517, 0x8be4a258, 0xca589eb4, 0xf9b729ea, 0x4f5a25f3,
-	0xc53ad0f1, 0x70cadf63, 0xfbd699be, 0xccf6b0d6, 0x8581487b, 0xacfd33d6,
-	0x4a83c07d, 0x07d69581, 0xc1f6b3d4, 0x7105fc9b, 0xc0383eb4, 0x11deafda,
-	0xfad1b02e, 0x9ed641d5, 0xed932213, 0x66139eb4, 0x94b7dcf5, 0xcf5a0ec9,
-	0xbcf5616d, 0x9d93fd8f, 0x61179eb4, 0x153f8fdf, 0xeb4f1c9e, 0xfb59dbe3,
-	0xd0a44bc4, 0x0913eb45, 0x7b02f587, 0xad02617e, 0xbd58b817, 0x20995fa8,
-	0x7dbfe0c7, 0xa1116462, 0x7fddb0bc, 0xd3a422b3, 0x455914ba, 0xfe9f14dc,
-	0x8b0f5839, 0xbfb43164, 0x84532fe5, 0x912eb471, 0x17fed0d5, 0x1fb6057f,
-	0x6f6c6510, 0xf6c2aff7, 0xed8c9203, 0xb07bdaa6, 0x60a8aafe, 0xbded727b,
-	0x92abfef8, 0x6b83ed82, 0x41fac21f, 0x63ed83d1, 0xef8d7f6b, 0xd83c941f,
-	0x80dac8fe, 0xffeb4852, 0x00b679c1, 0x9e71d75f, 0xfc0d9272, 0xa52b4c1a,
-	0x238ebafc, 0x1e3e4073, 0xf2a6a600, 0x525d2eb0, 0xfbedbf40, 0x3c93de47,
-	0x3276f2a7, 0xf53e97d4, 0xf3f61640, 0xd223f61c, 0xfb9ef87e, 0x58cdf899,
-	0xbf133f5d, 0x69fad729, 0xaceaf784, 0xdf67ebbd, 0xf0f5e337, 0xf5a1537c,
-	0x71fb17b3, 0x135e6ef4, 0x87a09dbf, 0xad4adbe7, 0x4fd8839f, 0x09e0ef42,
-	0xfd74638b, 0x5a65c584, 0x7ec47f3f, 0x1e0ef4fa, 0xeba71a45, 0x6b969147,
-	0xfd887cfd, 0x9faef7a4, 0x1ead74b0, 0xd685691e, 0xa7ec11cf, 0xa5e6ef7f,
-	0xc3d3af98, 0xfad2ae63, 0xcf748939, 0x073f5dea, 0x1cfc7a1c, 0xe7e07470,
-	0xa833c21c, 0x702af377, 0xe053f1ea, 0x25cfc0ec, 0xdeaae7ec, 0xa9c073f5,
-	0x6701cfc7, 0x0e447e07, 0x77ac35e6, 0xd7882af3, 0xbe20a7e3, 0x0e4e3f03,
-	0x3bd119e0, 0xa3ed5e78, 0x7dabcfc7, 0x8a93f03a, 0x1dee8cf0, 0x7a29853c,
-	0x74a614fc, 0x784647e0, 0x9faef5c6, 0xf8f45357, 0x03a53579, 0x3f61573f,
-	0x5e6ef5d7, 0xfc7aa985, 0xe076a614, 0xc9fb1727, 0x78476cf7, 0xd1c7ed08,
-	0xfb073f7d, 0xb073f1eb, 0xae7e077f, 0xd0a67ec5, 0xee7bb27e, 0x8f5328a7,
-	0x0ecca29f, 0x9e2214fc, 0x3f5de86f, 0xf8f53307, 0x81d99839, 0xcfd8a99f,
-	0xabcdded4, 0x7e3d0ae8, 0xf860ae8a, 0xc08c2499, 0x9dae8675, 0x727e9e6e,
-	0x857cbf7d, 0x2ef3efa3, 0x6e5de756, 0xaf0f7602, 0x45a433d9, 0xf6fbe9e1,
-	0x0fb9091d, 0xa6bb6890, 0x8fc076e0, 0xd1795a83, 0xd8fc4d76, 0x951d9d38,
-	0xeaea24a0, 0x757dc549, 0x1d29f7ef, 0x9d4f6ba0, 0x3daeb573, 0xabab93dd,
-	0xd78f9467, 0xa6bfdfbd, 0xe2bf5740, 0xef751bee, 0xd16ff967, 0xcfd7b3d5,
-	0xa83fbdd3, 0xfdaea17e, 0x5d0a86ca, 0x958155fb, 0xdb35faba, 0x7f7ba27f,
-	0xae8d7058, 0x03d3787d, 0xe111f6ba, 0x91f57447, 0xbdd31e87, 0x8b65ba3f,
-	0x87cc7dae, 0xc7daeacf, 0xeae97645, 0xa3df1ed7, 0xf6baff7b, 0xa4faba03,
-	0xbdd7bf8b, 0xd5de4f9f, 0x3f96dbdb, 0xe29fdeeb, 0x7ed74cfa, 0x0697da7d,
-	0x3aeed53b, 0xe75a8d76, 0xfa08ae41, 0x0974fe25, 0x43b0d5ed, 0xd7d4bac2,
-	0xc714fcce, 0xe528f952, 0x22c0e91f, 0x92f91939, 0x21bb51fe, 0x95f96fbf,
-	0xaefcfa11, 0x5d2b9ef1, 0x925df9f4, 0x862bb867, 0x8df9437d, 0xca506923,
-	0xed8d2826, 0xdf8c89f7, 0x0d2e320b, 0xf7bf423e, 0x2707da9a, 0x3e70fad0,
-	0xf1f2083f, 0xbb426732, 0x35278e3a, 0x999c5ef0, 0x5f74dfa0, 0xfe93de56,
-	0xdf587928, 0x5c19da9f, 0x45ebbf67, 0x51da1a4f, 0xc1f89fb5, 0x9fd759ce,
-	0x212fabce, 0x849f70af, 0xf7e903fd, 0x79a697fd, 0x89667f68, 0xe3d119fa,
-	0xa1fc744b, 0xe4187e38, 0x3f8c20e1, 0xe6f8ebba, 0xe3756301, 0x75cb325b,
-	0x3a245be3, 0xdf908bbe, 0x8eae7ed7, 0x9e30894f, 0xcfb93790, 0x66737c71,
-	0x9f7f8e39, 0xe8aefd44, 0xc63ae3f1, 0xbff9816f, 0x07fcdddf, 0x3fcfd78c,
-	0x7f3f42b3, 0xa3ffcd89, 0xf8ead3da, 0x3fff3871, 0xfcd9a773, 0xfcd82b33,
-	0x8edfaccd, 0xf81d9df1, 0xc7f8c08f, 0x9cdf19ba, 0xff3f413d, 0xf3f52a2b,
-	0x4ff1b337, 0xc7505ed6, 0x5ff8e3b7, 0xfcd81772, 0xf1c4a8af, 0x0dc7b325,
-	0xc46523fc, 0xf8e804d5, 0x7c551fa4, 0x742ec0a9, 0x2487281c, 0x6421a152,
-	0xe100371b, 0xf18e2bb8, 0x947157db, 0xf99f50df, 0x500939f1, 0xfd4799cd,
-	0x57d79546, 0x4097c8ec, 0xf53b61ef, 0xa0a896b7, 0x91e26e2e, 0x7306c9bf,
-	0xb7851060, 0x43f789b5, 0xeb86f17d, 0xbd5fa002, 0x14a0b266, 0x184813be,
-	0xcbfe7f9e, 0xe7a25b61, 0xd4972c65, 0x5122c78b, 0x07e1d6f2, 0x35219016,
-	0xc029be14, 0xeb3ba304, 0x0e3f529f, 0xa98fe31c, 0xffa843df, 0xc6c899f3,
-	0xf7f50bfb, 0xfea11ea0, 0xa4ce3a1e, 0xdda3bf16, 0xf0a34e1d, 0x7ff0aa97,
-	0xfd79302a, 0xe02e36f4, 0xd5f9f2a7, 0x7fa0478f, 0x1b6ee0bd, 0x1c277a45,
-	0x5d24fe65, 0x0fcbce9d, 0x6ddf6a74, 0x10e16c0e, 0x6be032bf, 0x21268a3a,
-	0x5067d68b, 0xffbe775c, 0x07a9bec1, 0xb7212739, 0xa54c4512, 0x9abedfef,
-	0xe3a2efeb, 0xb9cc52ce, 0x32521d6c, 0x24d7284c, 0x909634c3, 0x88471a5b,
-	0x5d3207b4, 0x448d3f11, 0x58a33b8d, 0xaa559f5f, 0x8a8ab7af, 0xb570a268,
-	0x66c8e74e, 0x39ecefda, 0x9c6d76fa, 0x4644a681, 0x52bc7567, 0xfa74938a,
-	0xb9943668, 0x7485d8f0, 0xdf62e39e, 0x1778f06a, 0x7e8c2489, 0x010fbfbc,
-	0xf193faba, 0x362e79bd, 0x73bc236f, 0x4a528b44, 0x8ca739e7, 0x1b7f000f,
-	0x9f68ffe1, 0xd0e5314d, 0x22a3fd72, 0x8f9d7531, 0x1eb9fe11, 0x22827ce3,
-	0xcbf3f3ac, 0xdf19cf8d, 0xffe9531c, 0x2d07f029, 0xa0fe00bf, 0xf9551ff0,
-	0x32af53a3, 0x3d9af0fe, 0xda1f80d3, 0xe904f237, 0xadcbf2aa, 0xa92cbf2a,
-	0x2105f3d7, 0xb8e8111e, 0xfb970e6c, 0xcc1f1440, 0x5960f956, 0x6e6f9e83,
-	0x3d317e27, 0x6ee65d06, 0x9a6f7cd8, 0x9f7e75dc, 0xff337ca8, 0x9f88fdc1,
-	0x7464f3ae, 0xd3a543ba, 0xf6fa35ed, 0xdeba555b, 0x4e75d2ae, 0x51afc3c3,
-	0xc9e641f5, 0xdde41101, 0x9e8d53fb, 0x3d3d1d11, 0x708d3d2a, 0xf3d2a1de,
-	0x7a331f8e, 0xa88de11a, 0x9c348cf4, 0xae80c913, 0x5be11af0, 0xf9977770,
-	0xccab5c60, 0xde9e9b1f, 0x4755fca6, 0x05579ea3, 0x3475586f, 0x6c56ce4a,
-	0x2fabae9f, 0xbdd5cc0f, 0x4ca1acbf, 0x7ea4bed7, 0xd17daeb9, 0xf5753bfa,
-	0x758fff32, 0xbbb82fef, 0x7b7ed756, 0xf6bafdcd, 0xeb0fe5f9, 0x1b3d73ea,
-	0x9ecfef75, 0x3ed759b3, 0x5d19f4ab, 0x9de28cfb, 0x6574faba, 0xd37deeb7,
-	0x066eabbe, 0x3deb7cfe, 0x713d809e, 0xc605fdc1, 0x45b82f33, 0xd473bc37,
-	0x1f5f2327, 0xf2c10df3, 0x7c8dcfb8, 0x1637d27f, 0x66a6d6cb, 0x7413ac3b,
-	0x124a5c5d, 0xcd326908, 0x0fdf5dab, 0xeb8269d6, 0xa9e4c869, 0xb37ad3f5,
-	0x28794649, 0x78489069, 0x2c1c2124, 0xed1c2a36, 0xa47b547c, 0xaa06f687,
-	0xb6ba93f8, 0x3f624497, 0x76523ef7, 0x7765f005, 0xcbfd03eb, 0x4da7bb00,
-	0xed8debb5, 0x8d291c95, 0x1ac84e7e, 0x626ac384, 0xc4a54776, 0x5772bfe4,
-	0x4271017a, 0xe6b83c3d, 0x2905e372, 0x9f02a793, 0x78e4eb64, 0x3a35c359,
-	0x9a204efd, 0x6df807dc, 0x8af9eea4, 0xbeead7ed, 0x479fb53b, 0x5741abb8,
-	0xb165838c, 0xe81333f4, 0xe67370e1, 0xa700618c, 0x4deb1472, 0x3c2ed07d,
-	0x755e2be5, 0xafd01074, 0xbee3cb14, 0xf31e5839, 0xea3cb079, 0x53f2c72b,
-	0x11960d5f, 0xfe58dddf, 0xf2c7e7c5, 0x2c7adf63, 0x63d5f23f, 0x01afa1f9,
-	0x017df7cb, 0xb6fb0f2c, 0x2f8ef963, 0xaf8b6588, 0x9f56cb09, 0x7726a582,
-	0x71ddf13d, 0x093e1d75, 0xcf8317fc, 0xed7f3aa4, 0x7c9d09fa, 0x87dfc716,
-	0xb9e1a67c, 0xf2acc1a4, 0x1f8e8a43, 0x4397c012, 0xbda1eb3e, 0xb0f95441,
-	0xb763efbb, 0x6bfcb77b, 0x0fea6df8, 0x7e4eb7e4, 0x53f030ca, 0x34fc4f76,
-	0xa7e28f8c, 0xb31726a9, 0xfa7e547b, 0x8623cc19, 0x8c0f315f, 0xf6513e90,
-	0x826f929a, 0xbaa56c75, 0x601f420f, 0x763aacfd, 0x05b77d1d, 0x10c0baed,
-	0x0ece3758, 0xd860dbf9, 0x21fb3847, 0xf7567e25, 0x49f233f3, 0xd05778f7,
-	0xa01a59bf, 0xdaea4f44, 0x78638d6e, 0x31489ab5, 0xfddaeba1, 0x2f729e83,
-	0x81758a1c, 0x01f7c224, 0x8c4774f7, 0x0cada97e, 0xaf09edf8, 0x72af8e75,
-	0x8f63bfa0, 0xca0f3dfd, 0x2f6626a9, 0x68f335c7, 0x93f093b7, 0xc76fc06e,
-	0xa77664ba, 0x7dbdbc41, 0xbb42e490, 0xe3d64c81, 0xc3a05fcf, 0x4714fddf,
-	0xd6eeb82d, 0x06fe21a7, 0xbd38357e, 0x49ebf817, 0xcf84f7bf, 0x7fef3085,
-	0xd27b3e01, 0x45e93d8f, 0x342fc8a2, 0xedb7f9d1, 0x80fb961b, 0x1e5ee30c,
-	0x9afedadf, 0x7e5f9e11, 0x4b6e3e47, 0x25b8f8d1, 0xa41f8093, 0xc6d9cbca,
-	0x2e81e32b, 0x40f4fd1d, 0x9f77ee4f, 0x7eff8264, 0xdfdf4b3a, 0xe2fec67d,
-	0xa70dc225, 0x89243ae3, 0x92bf53c4, 0xd1e36cf7, 0xfc47719f, 0x67d83710,
-	0xe0c9d773, 0xaffc9e37, 0xeb3d0cb0, 0x0f670be3, 0x3f04e93d, 0x5f1a656c,
-	0x1d063473, 0x982ab2b5, 0xf68f6355, 0xf5f49a57, 0x715cf5b3, 0xc725e710,
-	0xeb061ccf, 0xa8e6ab8c, 0x0d3f7a08, 0x959fad4b, 0x738e1269, 0x3c767b72,
-	0x4c02fff3, 0x4048ec9f, 0x67d2737d, 0xd9fff7c1, 0x8fd774f0, 0x8d210f06,
-	0xe80b33e4, 0xdd96da73, 0xcaddfbfd, 0x825e7083, 0x890929f8, 0x69bf815f,
-	0x3b7fffa5, 0xb015fa00, 0x0debf5ae, 0x70f37ef2, 0x3743be78, 0xd64efd1e,
-	0xbbe18cf6, 0x204ee5ee, 0xa7be34c7, 0xbaabfbf4, 0xbb62bdbf, 0xc76f46b5,
-	0xdeeae826, 0x9d1af4a6, 0x00ff0b5d, 0x1386bdc3, 0x54ab0960, 0xb04db0d9,
-	0xda7e07af, 0xf049c103, 0x5ef6385f, 0x79222595, 0x16971464, 0x6385d3e0,
-	0x6797fe35, 0xa9ea99ff, 0x048a6f13, 0xa25c8ce4, 0xaea9e550, 0x899bf220,
-	0x917d6898, 0xc6c2f6fa, 0x6eb02515, 0x26f9789d, 0x931643f4, 0xc7f82752,
-	0x0f3ea4e5, 0x89a7b5e2, 0xf3e418a9, 0x39c77934, 0xad1e4a32, 0x2e9d8482,
-	0xe3b7af5a, 0xabaf7fa9, 0xd7d06b2f, 0x525b9297, 0xe97edf60, 0x38049106,
-	0xf6fa1bd0, 0xf61779af, 0xacd48cbb, 0x57fb7583, 0xa16bbc6a, 0x5419088b,
-	0xf6fd556f, 0x0a32bcf1, 0x71604b87, 0x7a1f6d16, 0x7ff32279, 0x2406662a,
-	0x59ffbe85, 0xa95bc8e3, 0x07dfa206, 0xbc7ec1d6, 0x6f713a7f, 0xf7e95d23,
-	0xc237e15d, 0x5d03d9ab, 0x3855c3f6, 0x4a73b792, 0xcb1e8620, 0x67263814,
-	0x102bbeaa, 0xc7b8ba5c, 0x7bfd4334, 0xd13253f3, 0xde1ed3f1, 0x668c2793,
-	0xc0fc03fc, 0xe792ed09, 0xd69ff487, 0x7f82ffa5, 0x68fdff6a, 0xfeba79ff,
-	0xfb53fda7, 0xfe05d81f, 0xaffab179, 0x2ff3edfa, 0xa93ea9fb, 0x4e97f178,
-	0x13c9d742, 0x9b8a7d42, 0xdb72b5d2, 0x96854ebd, 0x13bf05c7, 0x8044f5f8,
-	0xef458e2f, 0x154e0587, 0x41cec542, 0x49fe0ddc, 0xecf93ffb, 0xf11e30cf,
-	0x85d136d5, 0xe6edb4f1, 0x61ca99b0, 0x12f2e375, 0x23f58392, 0x19df7eac,
-	0x7a4dea1e, 0xfa78abfe, 0x1f902997, 0x8d453942, 0x9ed1852f, 0x79fadead,
-	0x5e4fac11, 0x64728ed2, 0xbfc60efc, 0xaffa8898, 0xdaef8a4c, 0x38c4e14e,
-	0x8bc55781, 0x6767f1b7, 0x37942778, 0x82fa017c, 0xc7e8227a, 0x572bbf1b,
-	0x8235d4ed, 0x8d98f923, 0x190c7bfe, 0xc3517a03, 0x3b30090b, 0x5f99eeb5,
-	0x70a11ce7, 0xa6fada9d, 0x97c28b93, 0x83674f26, 0x8f73fe8b, 0x6ddebddc,
-	0x6d16f2a5, 0x96eb690f, 0xd7daa4dc, 0x8a565621, 0xf3e42761, 0xdd166e54,
-	0xf2b8fa7e, 0x7a9f27f9, 0x7f99e20c, 0xd107bb32, 0xff3c57fe, 0x69e3fbda,
-	0x314ec57d, 0xc34d84b9, 0xd274a5ce, 0xbfff4bc7, 0x1e93b73b, 0x4d79bf15,
-	0xe7b18792, 0xd27624f7, 0xfdcec565, 0x15d61912, 0xfb83931f, 0x063d88a5,
-	0x8a47827d, 0x7ba85ec0, 0x8825bfe6, 0xc7d89e33, 0x18acd491, 0x1afcdcf8,
-	0x278003da, 0xaf4aa7a4, 0xde19fa0e, 0x80ba52f7, 0xcbd236de, 0x5522def8,
-	0x90bf40bf, 0xfbf94167, 0x07903d85, 0x0dd991f5, 0x617f2878, 0xf3e61395,
-	0xf8c35085, 0x537bf1fc, 0x8b959f40, 0x961714fe, 0x13f979ec, 0x5bfe423f,
-	0x528ff6f6, 0x9444be30, 0x45ae1374, 0xe79874fe, 0x70b34d92, 0x07894b9e,
-	0x71fcb0f9, 0xcb4034be, 0xde29020b, 0xac4e4319, 0x2f939322, 0xd2e250b6,
-	0xfe017e79, 0x77efe824, 0xb436c0f8, 0xa024efbb, 0xcea47e0f, 0x580c5a85,
-	0xf46160bf, 0x2ebaabfa, 0xa33eb010, 0x7deb77f9, 0x93a7402d, 0xd85495fd,
-	0xc112f177, 0xfb83e2af, 0xbfcbf696, 0xd195253d, 0x9e42c889, 0xf75d1dfa,
-	0x7873c327, 0xac5445bf, 0xc8efba39, 0xe39d59b7, 0xa7c756af, 0x7ac1c770,
-	0x6c4a45fd, 0xd44f35fb, 0xb75d00f4, 0x4a2cf8a3, 0x6ffc99de, 0xbbc99fbd,
-	0xe981ff26, 0xfe7ed0c5, 0xf8239330, 0x0a43d60e, 0xdb153857, 0x50e4cff7,
-	0x3a3f503f, 0x156f9c96, 0xb7d73955, 0xc285f91b, 0x51f1702f, 0x24e3037c,
-	0xdf701d22, 0xfa06e965, 0xf51e947d, 0xaeceb8c2, 0xbc726afd, 0x455bf34c,
-	0x9b203ebd, 0xdee81e98, 0x9e23f2ae, 0x53c0c52a, 0x52fc818f, 0x20cbf579,
-	0xcc2962bf, 0xcd1dcbff, 0x72a3cfef, 0x935065fb, 0x355ebd5b, 0xaef96dca,
-	0xdc9624d1, 0x9377697e, 0x9f4b7298, 0x7b5b94c7, 0xfff9f904, 0xf0d55eb4,
-	0x78f00c38, 0x351e274d, 0x3e1dd93d, 0x90f27a8d, 0x8d5e2320, 0x1dfe927a,
-	0xf95d7926, 0x8d43e351, 0xab9e2aff, 0x51f402ba, 0x7c6a9f07, 0x1aa7c1d8,
-	0xef89761f, 0x6c68f0ea, 0x34fb00bf, 0x96f9ae14, 0x528ed38d, 0x4ed2d257,
-	0x7f26df70, 0xaafb8f26, 0xe584f396, 0xf3111081, 0xd5303f43, 0x753b068c,
-	0x3d6fdfe2, 0x7785177d, 0x2c8bf13e, 0x445ea02f, 0xb7d2ffbb, 0xf3a04edf,
-	0x79e2a799, 0x54fb453e, 0x0239974a, 0x70a38e17, 0x3f8815ce, 0xb7e2113e,
-	0x0a34f91c, 0xfae5f98e, 0x4c4dfc3a, 0xa7a7ece9, 0x9fabbff7, 0xb7cb7df2,
-	0x1d3f5d29, 0x50bbc844, 0x10bc388a, 0x81d357cd, 0xde7f14ae, 0x00605c51,
-	0x5088a9ea, 0xbd77e51a, 0xf3fb3220, 0xa319c2ed, 0x9fc9bec1, 0xf19e2c3d,
-	0x7bf460fb, 0x3b3eaabd, 0x41e397eb, 0x650d9fcf, 0xf67b7fa3, 0xac4722d0,
-	0x9566d0bc, 0xf7535ecf, 0x5cecda5d, 0xbff94f3d, 0x7da3b48d, 0xc95bb7e3,
-	0x82fb18b6, 0x5f4d451b, 0x7fa374ab, 0x8e7f1d3c, 0xe97387ca, 0x51b9f1a7,
-	0xf5399b74, 0x4aece084, 0x34fbf807, 0xa1fb0fca, 0x06be05f8, 0x235b36fc,
-	0xe231a545, 0xf8a9cf79, 0x6be0789b, 0x0c2dcfcc, 0xc7800be5, 0x8baf3b42,
-	0xc9a93c83, 0x143250eb, 0x60789ae0, 0x5347cff9, 0xe21ef63e, 0xeb8f90dd,
-	0x3c919d0d, 0x2361fc31, 0xb07fa13e, 0x2e888f33, 0x627bd7c4, 0xebc012e9,
-	0x04acb37b, 0x95df35f6, 0xe0b155dc, 0xf5b3332c, 0xbd292e66, 0xbffb8a30,
-	0xb3f9bf0f, 0x8a02e11d, 0x9676b38f, 0xff95ddf7, 0x759fdc98, 0x0e5a8171,
-	0xf56790f8, 0x71002e64, 0xf9e222b4, 0xe50e04f9, 0xfeb4527d, 0xfe9a6fca,
-	0x54f5e43c, 0x89973887, 0x110b57b6, 0xdbd8f809, 0xfb0053b4, 0x289926fd,
-	0x6a108f18, 0x8a8ccd86, 0x05111d7b, 0xdff357c4, 0xf80edde6, 0x4cd3373d,
-	0xe8652e00, 0x01d82719, 0x512342e7, 0xd79bba0e, 0x5a647c1f, 0x10fd08a1,
-	0x3f230fe4, 0x74db2514, 0x499359f5, 0xdba5373f, 0x95647344, 0xeafd063b,
-	0xbd67c624, 0xff966fd6, 0x04dbf4cf, 0x5f18dfaa, 0xedfad18b, 0x7df18926,
-	0x8d4b7e94, 0xd656dfa5, 0x17c0a9ca, 0xa766f72b, 0xbe575d02, 0x2c4fa4b1,
-	0x8fbaf6fd, 0xa86ff7f9, 0xfd6de679, 0x1e1b7ea8, 0x51fadfa5, 0xae2316fd,
-	0xa5ea5a3b, 0xcffcb37e, 0xa0ebdfc8, 0xb7cc62df, 0xa69fc558, 0xb5438adf,
-	0xfb8adfa8, 0xa97cbaf1, 0xfa4f5249, 0xb397ecad, 0x6dba2eb0, 0xf007f831,
-	0x0dedfa0a, 0x38c1cf55, 0x5dfee7a0, 0x3d277d72, 0x3d5bd557, 0x67843ff7,
-	0xecadcf4d, 0xd33da1cf, 0x9e990f95, 0xf4c5995b, 0x4cbdcadc, 0xc41cadcf,
-	0xbf519cf4, 0x6fd17415, 0x21eafbec, 0x23f47bf4, 0x1b7d7eb3, 0x23992f6d,
-	0xfdf42dba, 0x9f3b5912, 0x5a3a3351, 0xd4bbfddf, 0x9f73be8d, 0x3d2e73c1,
-	0x823fbbe9, 0x7a841bbe, 0x91c8206c, 0x1c6e3f91, 0xd3e5d368, 0xb1f5f7bd,
-	0x79045ee7, 0xfe8f03f9, 0xe62607f7, 0xfafbed27, 0xbb9048d8, 0xaa1e00f7,
-	0xf9519eef, 0x47e7d5af, 0x28793a7d, 0x7baaf793, 0x1baafe18, 0xd5df3639,
-	0x7586407c, 0xd1176fe0, 0x2f7dbe8f, 0x9b67a3f3, 0xc0d8fa5b, 0x225fffcf,
-	0x2bfd25ca, 0x87e28b29, 0x302b1739, 0xce2bb9ee, 0xccfc05b9, 0x80b10239,
-	0xd0e0bb1d, 0x7ec0278d, 0x3d71705d, 0xe00bbdda, 0xc8e92279, 0xa1db98fb,
-	0xebf6f527, 0xaf9da6bc, 0xf9ae9065, 0x8ccd1310, 0x7157132e, 0x5d59cd81,
-	0x5da823f3, 0xc62df986, 0xabdf893c, 0x47cd9ff3, 0x8fe45f10, 0xe5f8cc7c,
-	0x72788def, 0xad54bc33, 0xaa78f5e6, 0x89e262e1, 0x2ca4ba52, 0xb72f13a5,
-	0x975914bf, 0x39cbed01, 0xf38cb7f4, 0x9c66f0d6, 0xcd4786bf, 0xbea059bf,
-	0x24743f3f, 0x86889e66, 0x22f92ee7, 0xf80dde1a, 0x33d34b78, 0x206190d7,
-	0x3c981f97, 0x7c0d1f3f, 0x178a7bf4, 0x73ade70a, 0x2bcee907, 0x65e2a3bd,
-	0x6148e7aa, 0x24780c8a, 0xf367c035, 0x96be77ca, 0xb377e742, 0x210b9592,
-	0x937f59f5, 0x688f103c, 0x1ea3b6b6, 0x9470f8d4, 0x5985c999, 0xf5ef2bd5,
-	0x7ae21575, 0x50b9c4d3, 0x3d06c2be, 0x7999e6a7, 0xd7f261ef, 0xbaf7fdcc,
-	0x6788518c, 0x91482e58, 0x5d015eb6, 0x86a73fe8, 0x40bc5d18, 0x69cffa17,
-	0xe020fda4, 0x73993abd, 0xa6fde187, 0x3f02f79d, 0xcfa56ebd, 0x39cbce41,
-	0x0e8616f7, 0x65ca7a7b, 0xc58858f9, 0xc8cc18c7, 0x173f5ceb, 0x5d897bc0,
-	0xe68993ed, 0x8e00f796, 0x366e5489, 0xfd00c3c3, 0x46fe8a2f, 0x07c8c5fb,
-	0x7503e53d, 0x2ab9efc7, 0x3a075f9e, 0xeddf01d8, 0xde43d812, 0xb47f5b30,
-	0x1720af76, 0x3a34de22, 0x65f5d134, 0x2983a314, 0xd66f9e06, 0xbd9e2aea,
-	0xef844e21, 0x6ffea06f, 0x7ebb0712, 0xf8d41f5f, 0xc5772cdd, 0xd215c413,
-	0xe806f4a3, 0xcd7de8b7, 0x11b7a6ea, 0xa6ae375f, 0x15dc99e6, 0x407d1a5f,
-	0x6f0e5e0f, 0xd34fcadd, 0x61799891, 0x467e55df, 0xb3f2f599, 0xe6fedacf,
-	0xedab8870, 0x90af50e5, 0x7e2e8250, 0xecccd330, 0x07ab6696, 0x0dfdbcf9,
-	0xee45bdd1, 0xa8a67faa, 0x257f0174, 0x64e27cfa, 0x4de80898, 0xa67c9597,
-	0xe3007bcd, 0xe0f5e8b7, 0xe907ab75, 0x33ff5dd7, 0xedfecccc, 0xead31ece,
-	0x9078c3d7, 0xc7eb28d7, 0x5a47ae33, 0x79a7a95c, 0xbf71d479, 0x71b4bcef,
-	0x84beebbe, 0x3c60b497, 0xd89fdb4e, 0x89767bc3, 0x73163f60, 0x0a107dba,
-	0xfe6fee39, 0x59bffa13, 0xff7ddd1a, 0x530a3f10, 0xe3bebf3c, 0x9f638c49,
-	0x34c8f67e, 0xaf159f90, 0xe542c4f0, 0x838775af, 0x889e5984, 0x45427604,
-	0x5dfb8f23, 0xcde70844, 0xa833b288, 0xf1f0c327, 0x5ef503a2, 0xa0732ec5,
-	0xf15f7e84, 0x103967f2, 0xc35d6b7f, 0x59ff9ff4, 0x91fd1f95, 0xa807c81c,
-	0xbcfed810, 0xa88f3e91, 0xb76a79fc, 0x6fe80e6d, 0xc73b3b6e, 0x2d9c115b,
-	0x0ce2a39a, 0x16459bf7, 0xc36ddee7, 0x33ff6c3c, 0x0331e61c, 0x48e7d17c,
-	0x53d0fcb5, 0x5cbd30cf, 0xe00624d1, 0xf6c5703c, 0x1710ad9d, 0x8cd0f8af,
-	0xfb77abf6, 0xd3ec0919, 0xcf3e2fc9, 0xf1371bce, 0x976878ba, 0x3e76e438,
-	0x59f8866c, 0x01ea1563, 0xf5823f5a, 0xfbf71aa0, 0x15b2718e, 0xd97dee2f,
-	0xe2b8514f, 0xf13b4f37, 0x36cb705c, 0xb723c627, 0xa05f7e5f, 0x7831dc4b,
-	0x9c771abf, 0xf5c105fa, 0xf1dc7621, 0x2127caa4, 0x48ee3eb3, 0x3c6127b6,
-	0x5799c292, 0xd17e231a, 0x5fcfffc1, 0xcdf60278, 0xf2faed4e, 0xf2bb8009,
-	0xfc4f739b, 0x2a93e294, 0xdbac1720, 0xc3df67de, 0xbbed067d, 0xd27d55f7,
-	0xb8d3ccfa, 0x27fad34f, 0x6b7a1bb3, 0x2645fbdd, 0xeeb453ec, 0xe2053afc,
-	0x4ef7abb8, 0xf56d7f41, 0x4953934b, 0x2b407f0c, 0xbd037f81, 0xd23227d8,
-	0x39b1b9ad, 0x4d3ce013, 0x77eb0ee9, 0x58393c47, 0xb2f4e2c5, 0x11de471a,
-	0x4bae5f7b, 0xc671b8dc, 0x3ac1d7cd, 0x65ba28de, 0xf1f88bd2, 0xe1cf4a61,
-	0x0ee3a0bd, 0x38209f75, 0xe3f1b2f5, 0x4a0ff0d3, 0x7d660baf, 0xe342fe1c,
-	0x0c7cff92, 0xba931ada, 0x7b871f8d, 0xdf6d3f81, 0x2159bf6f, 0x5da39016,
-	0x1edc61cf, 0x0f7d47e8, 0x85fcfad2, 0x1cbb884c, 0xc0efdb17, 0x66bdebfc,
-	0xd8aaa3cc, 0x53ca01fb, 0xe36f4beb, 0xf7511abe, 0xc7495adf, 0x5127db1f,
-	0x56ef3a7d, 0xab3b8b07, 0xb4b88074, 0x6ae7c4ec, 0xb5f199fc, 0x2eee9716,
-	0x32d63d1e, 0xabbfed80, 0x5b5591fb, 0x43112cff, 0x0b1b9fbc, 0xd9723af4,
-	0x0f0d547d, 0x98c3c02e, 0xd896fde8, 0xfd8efff1, 0x80dd0316, 0x758f609e,
-	0x7ad0a7ec, 0x07ab883f, 0xed620fb8, 0x666eb5df, 0x62ad34fb, 0x6d45bcec,
-	0xc5a465ff, 0xe812efb0, 0x4f4bbedd, 0x78aef8f3, 0xb42706ca, 0x9d7c574f,
-	0xbf5b14ba, 0xd4e16adf, 0xe7be037b, 0x67257ebe, 0x05981bcc, 0x78d5597c,
-	0x4a7b0244, 0xf9b4df5b, 0xe7fd529e, 0x78f2cf53, 0xb05d644e, 0x51bbf519,
-	0x1613547f, 0x5bc23437, 0xab7a616e, 0x1fad89ba, 0x023976a7, 0xa9cfda76,
-	0xaf91bb03, 0x911c77ab, 0x83bfb4fc, 0x45237fdb, 0x60acf2a2, 0xc14408fd,
-	0xfd85ea7f, 0x897f6c39, 0x71c6ebf9, 0xf1c752ee, 0xe38f6286, 0x374671dd,
-	0x507f0ace, 0x2e7ee762, 0x4149de3f, 0x9dfd0d99, 0xe409116c, 0xf20c9ffd,
-	0xe31881c5, 0x5a88b5cf, 0x0fc98b3c, 0x1cf1475d, 0xbb9d83a6, 0xb42513e4,
-	0xc63b57bb, 0xfde7087e, 0x19243b57, 0xb57517e2, 0xeeb52f2c, 0x4069dcdf,
-	0x5b84baef, 0xdeae3f71, 0xb2575f80, 0x1ae21f2b, 0x51d2c2ae, 0xbd46aec0,
-	0x7498a093, 0x1476aff0, 0xce14caa7, 0x469daab5, 0x0b9e3704, 0xc5459de5,
-	0x65de1f30, 0xec635972, 0x52f6883b, 0x8bc289e2, 0xe39fd2e8, 0xca469724,
-	0x7f968fd0, 0x39696953, 0x052e8d88, 0xb1858c53, 0x99fcddec, 0xdb779c2e,
-	0x507fd50e, 0x614aec88, 0x8eb06479, 0xcf8aedb4, 0x43f1c321, 0xb47e50a2,
-	0x1db9cfa9, 0x5e83f7fb, 0x4a24eb5a, 0x8a339502, 0x86cf9955, 0x2c23acf3,
-	0xe9f0365c, 0x857aff99, 0xf10d6bf6, 0xd9b457e8, 0x25527cb5, 0x46cce401,
-	0x41bcc41e, 0x936fe560, 0xe634e13a, 0x25781213, 0x298d3eea, 0xa1fd1dbc,
-	0x7c589bb3, 0xff572780, 0xcf8b027a, 0xafc00091, 0x542b2fae, 0xe212cf38,
-	0x3bfbc30e, 0x580f181c, 0x9422c6f6, 0x3443a01f, 0xf58a92be, 0xac1b5ee7,
-	0x67f01cce, 0xbf555a36, 0xc0b4afc6, 0x6ac59b39, 0xf54a7dbf, 0x18a962e7,
-	0x975e41fa, 0xe5faf2a8, 0x9843a2d2, 0x8a59e68f, 0x8e753e7a, 0x31acdcfe,
-	0xaa204b4f, 0xfe601c9f, 0xadbc9773, 0xb708cda6, 0xc56b7f31, 0xc35d7d76,
-	0x37a027e3, 0x127402af, 0x80e2e5fb, 0x3237e23d, 0x4613d7f8, 0x9afc777d,
-	0xb5f8f4d3, 0xdafc7aca, 0xa7f11886, 0xadc3afc7, 0x97e697c7, 0xf8df8776,
-	0xc873fab1, 0x8afc2aff, 0x548ed556, 0x4aff4af1, 0x654c292d, 0x42e9dc03,
-	0x28c2e518, 0x30f61947, 0x9feeff07, 0xafc5a81c, 0xefd40edc, 0xb87cea69,
-	0x1b3becc5, 0xf00f11c8, 0xe08e51ba, 0x79e82024, 0x75d8f91b, 0xfac40acc,
-	0x4d7b7c8c, 0x355cf4f7, 0x0b23d5fd, 0x809b57e9, 0x3f23877f, 0x89bef3b0,
-	0x05975024, 0xc176ea72, 0x59f41dfa, 0xb8458bdc, 0x17b885f7, 0x5efb820f,
-	0xa43e585c, 0x0db4abe6, 0x306e7825, 0x029f3e18, 0xdca1e9fa, 0xf7a069f6,
-	0x29484bbc, 0xc51fc1e8, 0x0f03f3b1, 0x38bf65a8, 0x85abd549, 0xef824c6f,
-	0xe70ca243, 0xdb42dbd5, 0xdea0832c, 0x2a3de3c4, 0xabfa84de, 0x90d6fc60,
-	0x6c5ae0c8, 0x38820c09, 0xc7115ec8, 0x013c5d6d, 0xd87665cf, 0x2f96216f,
-	0xccfa16d2, 0x9f4a28b9, 0x7a3d36b7, 0x36b9c415, 0xa9e7629a, 0x7e9ab14c,
-	0xec1bfad8, 0xc537b792, 0x1eeaf2ca, 0x51e7401a, 0xbaacfd3d, 0xb879330e,
-	0xabf3a556, 0xf9c46f4b, 0x64e214bf, 0xf88a4758, 0x461a6edb, 0x3dee39e7,
-	0xb0cf8d41, 0xf528e578, 0x2fd03afd, 0xdfeb5fa8, 0xddc3e9e5, 0xe7020547,
-	0x2cd546f4, 0x15eb7f45, 0xca73e527, 0x704a7917, 0x616df024, 0xcdef0128,
-	0xd04c7ef1, 0x22dd1fae, 0x4f33f8e8, 0x22f3575d, 0x44c05e54, 0x3edf50f9,
-	0xec18222e, 0xfc0f00a0, 0xfd71ed75, 0xd55685f3, 0x149272ee, 0x970df3e0,
-	0x5ef20e78, 0x7b89dadb, 0x6dbb850d, 0xa3845f71, 0xfa9c3ced, 0xbe25e5a5,
-	0xbf7ad638, 0x62f8caca, 0x9d7044a3, 0x8ed4b8d9, 0x4b03c5f1, 0xf580ae2b,
-	0x7b1fabfd, 0x8e7588ae, 0xc53f4a3c, 0x252c7cb3, 0xfe058c9e, 0xbc31cb5e,
-	0xc697a7d7, 0xf8d7f7c8, 0x8d6fe359, 0xc697d3af, 0x35e56279, 0x7665637e,
-	0x21d2c15a, 0xdafe049c, 0xe38f0e3e, 0x5cf1aeb6, 0x9f8ddcf6, 0x7800c9ac,
-	0xd0e74dbc, 0x3884b6ee, 0xb1bd9625, 0xfec4eac1, 0x6bf8d75b, 0x2eef8f21,
-	0x27a09c2a, 0x0377efbb, 0x813f5bfa, 0x677c2ca0, 0x73c32fa9, 0x642c4bbc,
-	0x85bbc40b, 0x1c5bf4fa, 0x6f93ffc0, 0x7de14758, 0xeb84d4ac, 0x8dd146eb,
-	0x08abfbf0, 0x1a83f8c1, 0x8d37edcf, 0xcf3e8e6c, 0xff3584fc, 0xc7a52b59,
-	0xd21756b3, 0xe6e3c925, 0x3ff77e00, 0xf209dbfe, 0x8cd176dd, 0xfaabec74,
-	0xaf77da43, 0x36dd9959, 0x0ad94e33, 0x64f293df, 0xc7b71394, 0x123c5ee9,
-	0x78a04dee, 0x4ea3928f, 0xbbf1f9fa, 0x71d50f44, 0xbb449e14, 0x2892f909,
-	0xc5d2ec8a, 0x4728fd29, 0x30905c9a, 0x4d8f2047, 0x885cabd3, 0x1ca83b0b,
-	0xc3d8b28c, 0x962477e0, 0x105379d3, 0xfac2c4ac, 0x754e116b, 0x3cc6cb9c,
-	0x7997ca79, 0x608a3870, 0x71121448, 0xdf4d7fa1, 0x6d7a7a6a, 0x59794102,
-	0xa810b0fb, 0x126cfda3, 0xaf885622, 0x01722964, 0x0a251aa4, 0xef179e32,
-	0xff304e5f, 0x78fd96d2, 0x42dd8742, 0x37c47e85, 0xfb5882fc, 0x869c7c79,
-	0x401fcf2f, 0x6a1ce46f, 0x8de6003f, 0x73c6cadb, 0x3b4166bf, 0xa87f43bd,
-	0xba9158f6, 0xdcfb8efe, 0xc209f2c4, 0x3ef44893, 0x687f519b, 0xebb8c9f6,
-	0xbf606b22, 0x189fdc68, 0x055bb49c, 0xcead1bbe, 0xa89f43b7, 0x1098e6eb,
-	0xfbf427d5, 0x66c8d0dc, 0xf72b07b8, 0x5dc72663, 0x3f21c9f4, 0xbefbf80f,
-	0x17c8c47a, 0x2e54c223, 0x32a1f6d5, 0xeae1a7dc, 0x19fb43a8, 0x9e49de83,
-	0xed152a3e, 0x8cdf955c, 0xdbe4d678, 0x77b9f728, 0x0ccd9bbb, 0x1a47e62e,
-	0x275c21c6, 0xe836721c, 0xb078b7a5, 0x29f2dbf7, 0xbf5c281e, 0xf4a3f902,
-	0xb81f384b, 0x21bfe601, 0xe415bd74, 0x27af7be4, 0x5475fa21, 0xbcd3f69e,
-	0x0fae3e27, 0xc04e27ae, 0xf3fef543, 0x46127aea, 0x01c8777a, 0x78e89395,
-	0x46ffc689, 0xa3e4d77e, 0xc8de2e0e, 0x047673c6, 0x0b9e59d6, 0x663065e2,
-	0x7805c9b2, 0x3aedecd5, 0xfe25bed5, 0x56ffb474, 0x1eba88bb, 0x4f800665,
-	0x5ecd44ea, 0xe3a25b77, 0x051dab53, 0x4fdb97a9, 0xfea45ef5, 0x1b39d459,
-	0xfe8ed0af, 0x84a2f79b, 0xfe37bfcf, 0x7914289a, 0x898dfc3a, 0x7f15dd1b,
-	0xb08471f1, 0x9ffec2fb, 0x230cdf9f, 0x7727dc7f, 0xe25aefce, 0xf5422579,
-	0xf5aade47, 0x3f193675, 0xd7969c39, 0xfb682f55, 0x01e9dd9f, 0xa98fbca3,
-	0x70c66fac, 0xeef20f4b, 0x25f8a9b5, 0xb3e80664, 0xb76a61f1, 0xff957564,
-	0xbcfceaf3, 0xb6f78636, 0x8307db5b, 0x3de7ad3c, 0x2f687135, 0xb0264c46,
-	0xb413762b, 0x8ffbdc7b, 0x5bde513a, 0x4feb7492, 0x8fc0bb57, 0xa7d9a9f2,
-	0x7c6a5d9a, 0x552ec3af, 0x3e2d1bd7, 0x795135ca, 0x193cf0a1, 0x1c03f1e7,
-	0xbfe62e75, 0xd05701c2, 0x3d584f63, 0x365fc075, 0xd838973a, 0xce12192f,
-	0xb096f162, 0x93bb3e4e, 0xde419b47, 0xb03f1482, 0xfae9f9fe, 0x1eeb8837,
-	0x0971b19e, 0x85aa5e0c, 0x97e9bec0, 0xd560d847, 0xfbc7f304, 0x6bfbb0e5,
-	0xfbb2e5fa, 0x31c73732, 0xa18b65fb, 0xfa5ac27c, 0x144bcc18, 0xfb9cdf88,
-	0x5006e1fd, 0x64f90e21, 0xf800d29c, 0x382b14b0, 0x71170c8f, 0x19de9473,
-	0xbc839042, 0x994ac489, 0xd247f163, 0xfb48ffb9, 0xf39128cb, 0x06323f81,
-	0x9a373c12, 0x9e7d8a11, 0xf13895e8, 0x8debd987, 0xbcc1ce5d, 0x41cfcaa2,
-	0xa937ce89, 0xe9839d84, 0xf050fb88, 0x8eadbf01, 0xadb2715b, 0xab3ed817,
-	0xd9e1813f, 0xc101bfe8, 0x5a825e60, 0x822257bf, 0x2bfd1135, 0xdfaff03f,
-	0xcaff4164, 0xd041dc46, 0xb1c41fb7, 0xce3aecf8, 0xbfea1ebd, 0x702dda10,
-	0x37268fcf, 0x343c3c9a, 0x40b716e1, 0x775e755f, 0x5f7c0736, 0x00ef172a,
-	0x9c275b9e, 0x6716bc1d, 0xf8c99ed2, 0xf975e14e, 0x9afd1af6, 0xacfd1d44,
-	0xd6895710, 0x08690ef3, 0x5cadedd8, 0xaafc1b9c, 0x831ce5d6, 0xe7a8b397,
-	0x3cdd0411, 0x1fcc6cd3, 0xe7f55369, 0x90b2e3df, 0x84f5b51f, 0xc63d6fce,
-	0xe8f30d7f, 0x386a8738, 0x973c6a77, 0x11dd969a, 0x7cc74a07, 0xee0952dc,
-	0x43672332, 0xbce3b436, 0x124cf6ce, 0x6a64bce3, 0x5cf31ac4, 0xbc5256b0,
-	0x4b780d7d, 0x40126b15, 0xcedea71f, 0x1f1188f4, 0xc47f9c6d, 0xfb47d841,
-	0x1f331883, 0xd2d32b45, 0x4c584a6e, 0xbf4b4fdf, 0x79ed4b01, 0x19885d83,
-	0x71b24c57, 0x64dcec3f, 0xfc18b103, 0xed1b24cd, 0x9de7b4ef, 0xff1415f7,
-	0x37bb8c76, 0x37bc31c4, 0x37bc31c4, 0xe53e1a48, 0xcebf9078, 0xf7975bba,
-	0x4967c1b4, 0xd10f2010, 0xb9f28e9f, 0xdde8c5c4, 0xf682bef9, 0xdca21f4d,
-	0xc4941730, 0x436c9106, 0x21f167be, 0xafc87ced, 0x4024cf7c, 0x96db94be,
-	0x16fbfaa5, 0x0604df46, 0x530df9f7, 0xb214dc70, 0xe2983ac6, 0xc9a96979,
-	0xd3a3710d, 0xc2723f0b, 0x1985e991, 0x0f20792d, 0x1b8f79a7, 0x984a97e6,
-	0x8e6cb85f, 0x2ed30814, 0xc2a81b93, 0x01ba7462, 0x4ccb3bf7, 0xc7aef331,
-	0xe9fed8d8, 0x961738d1, 0x90d36969, 0x92f59d4e, 0x8c4bf004, 0x35e54a7c,
-	0xcea8f17d, 0x6f94cc73, 0x790c5b14, 0x1349136b, 0x185beb87, 0xb1ac95f1,
-	0x35b7aab3, 0x39064979, 0x52ab7d84, 0x3a3547aa, 0x4d5f500f, 0xfe28b8c1,
-	0xbfd7a171, 0x79c37f06, 0x45ea015d, 0x10c88e4d, 0xa0ade7a6, 0xa1e2a377,
-	0xe83f7b6d, 0x9f8efb0f, 0x0739dbfc, 0x55fd3bec, 0x9e807768, 0xbbcf7e3d,
-	0xf4c7380e, 0x2e2c3dc9, 0x4fc18772, 0xfa63645b, 0x74ad8f7f, 0x8177e01e,
-	0x9e791fef, 0x77257e28, 0xe593fdb3, 0xde70de01, 0x506f7f5d, 0x70c93055,
-	0xf11f908f, 0x1fdea55a, 0x46c7a466, 0x2cb78b1b, 0xca59b1df, 0x4f7c6190,
-	0x5c7f8c25, 0x378f43f5, 0xd1dfd03a, 0x63b859e0, 0xd9be0484, 0x7566435f,
-	0x6445bdff, 0x025287eb, 0x151e67fb, 0x0f38466f, 0x2f6af7aa, 0x8fcb25f9,
-	0xdd63a329, 0x27b0f54d, 0x187bcec4, 0x13e4b1e7, 0x129528b9, 0x1cfdc96f,
-	0xfef0ddfa, 0xf33d743d, 0xee1f7ddc, 0xd9e719b3, 0x051f5ef5, 0x2a65b3fd,
-	0x6de78dbd, 0x3ed88597, 0x41e262f8, 0xfe72ecf9, 0xc5cec436, 0x678de318,
-	0x00db650f, 0xa9b0bf0f, 0x323cc4f1, 0xef6dce06, 0xfe20343a, 0x9f56f772,
-	0x828bef52, 0x3ca1bb7b, 0xce5823ee, 0xe2902303, 0xf6f432bf, 0xd55fc05d,
-	0x3ef13b4d, 0x8faaefb4, 0x9c2742aa, 0xe9ad4b90, 0x6e876a25, 0x8b20f903,
-	0x5a7d9d39, 0xc49cf9bd, 0x9f866afc, 0xb7e7d4db, 0x20723e01, 0xd9fe5bdf,
-	0xdbef4a04, 0xd1f3c52a, 0x6f3da5f7, 0xf7c3efd3, 0x3cdabe76, 0xed6b79b5,
-	0x9c5e6a55, 0x0e4d3bf1, 0xb97ca9e6, 0x75f4eb78, 0xea8a297d, 0xa9917ef6,
-	0xf3c3939e, 0x2d9f1a42, 0xe945a523, 0xa349f831, 0x84df076f, 0xd3f38e7e,
-	0xbeb8bae8, 0x3f83c54c, 0x4c4fdd4d, 0x91957883, 0xa73a7a8f, 0x32462add,
-	0x7c8dbe41, 0x7dcddad2, 0xb31b2128, 0x4acb162f, 0xa8cfc411, 0x15cebbf9,
-	0x171cdf65, 0x14fe0fea, 0xe32b6ee4, 0x083d0efb, 0xf7e8314e, 0xff5c4537,
-	0x54e43a57, 0xe90fffb8, 0x13f20e37, 0x4f787ecc, 0x4f98e71b, 0x808a0651,
-	0x4f2c62ff, 0x81954afa, 0x97db3a83, 0x04e73c6e, 0x086dbbfb, 0xab51b8c1,
-	0x69ef0f43, 0xe37a8f1b, 0x4a8f4ab4, 0x3f9be5a1, 0xdadace83, 0xc7177982,
-	0xa771a92e, 0x58e2e64b, 0x39d8b4f3, 0x7778bddd, 0xf9a872a8, 0xfa540b35,
-	0xfb6211dd, 0x4d370be9, 0xc9747a47, 0xa1fd54bf, 0xf50e46b2, 0x4b3e918e,
-	0x3e63d7dc, 0x3e40a2da, 0x5e85df7e, 0xbba441e4, 0xda776e91, 0x371eec5d,
-	0x7b8246a1, 0xe26d8eed, 0x8571ff70, 0x73ff7b10, 0x9df4ddb6, 0x479c63e6,
-	0xdb2ff077, 0x2faebb5a, 0x908ff981, 0xf08dcf80, 0x425ff36b, 0xd4a7a614,
-	0x2f3776f9, 0xf2c49912, 0x7f75d434, 0x815b9c39, 0x790793fd, 0xc6adcf96,
-	0x35f834a1, 0x28f38d78, 0x7cf12be2, 0x8f035b41, 0xf877d979, 0x77067dd9,
-	0xfd70e5ac, 0x9a4e8eed, 0x7bf6d15e, 0x30ca9baa, 0xfb43cb6f, 0xedb63b01,
-	0x29f6c263, 0xcf7873d6, 0x0cf4b75b, 0xeea57cb1, 0xa30849e8, 0x374a62db,
-	0xdebb3ff0, 0x0caf909f, 0x0a27de8c, 0x8c0ca0dc, 0x4122b7de, 0xb15957cc,
-	0xf9eeba7d, 0x8e35768d, 0x9ef5eaa5, 0x24d48fe4, 0x696f8cc4, 0x9fc9a6f2,
-	0xda778f26, 0x0a6f6665, 0x59198381, 0xd1879f80, 0x7afaa1bf, 0x3df99d9e,
-	0xafa5cd0f, 0xa73c6f54, 0x3258a7db, 0x096bd196, 0xbbcf825f, 0x0f14bbd3,
-	0xd8bdbd3a, 0xf8c3cfae, 0xe6d1f3a1, 0x3689c9a1, 0x189ca33f, 0x43d237bf,
-	0xe919ef8b, 0xc007a462, 0x5bc67e09, 0x35816d7b, 0x38b7ce14, 0xaf7fb706,
-	0x4d6ee115, 0xb9c0ac9b, 0xf9f4eacd, 0x3e01fe58, 0xb0fb074c, 0x768eceb4,
-	0x8d87eaae, 0x225c5dea, 0x5ecbb557, 0xd9232ab2, 0x24d2a7b9, 0xb58993e0,
-	0x17161991, 0x583e8f21, 0xa4f7045c, 0x32387c4e, 0xbff14203, 0x5646f07e,
-	0xd77916df, 0xfcfb86e2, 0x690a8a4b, 0x2fd071fd, 0x95fa2fa0, 0x6efbe0db,
-	0xf973c4eb, 0x1fdeccba, 0xcf9d2e65, 0xed66b1ee, 0xb33ed495, 0xf2aef5d0,
-	0x4157e0f0, 0x4a5b2b7e, 0x542e218a, 0xba781109, 0xce2955de, 0xad872db0,
-	0x7be9e3fb, 0x4f3cd91f, 0x76ee21d9, 0x8bae2d71, 0x94058795, 0xc588722f,
-	0x573a0567, 0x6d6efd2b, 0x2993b51c, 0x5a26d77e, 0xd317e0dc, 0x97f07ee7,
-	0xb22a26d7, 0xa35cf51c, 0x70077c1f, 0x7cb135ac, 0x0c6ffd82, 0xc65c8f8e,
-	0x23efd82e, 0x34cfe025, 0x1a582cfb, 0x1725f3db, 0x37c8e79e, 0xb18978b1,
-	0x76bb6dfd, 0x00ce49ae, 0x243ea8be, 0x1fc3fca1, 0x84559fd8, 0x613549c9,
-	0x0eaad0e7, 0x53773c13, 0xcf08a87d, 0x84b9c0dd, 0xe07a754f, 0xa6ee735f,
-	0x9e18af93, 0x44ae040a, 0xd0b71a88, 0xf9d5d56e, 0x9810d354, 0xdce3e10f,
-	0xcf846e70, 0xa2ecd530, 0xa0afe7f3, 0xe087c525, 0xff70f372, 0x89e4fd4c,
-	0x559fdc3c, 0x2d79aa27, 0xbe3e7626, 0xe557dd63, 0x39fb2b4f, 0xdd028f4a,
-	0x25b1ff4f, 0x53f6c6cf, 0xe6d6afd0, 0x8429c75b, 0x35ed7f03, 0x7219e782,
-	0xe0334993, 0xb19446cf, 0x47166fc0, 0x6c97caa2, 0x65fe9b3f, 0x9b36e940,
-	0x7e53237e, 0x9fc1faff, 0xe3bbff22, 0x68b2ab4d, 0x59f8739d, 0x2e74c33d,
-	0xef30b28b, 0x6bf565a8, 0xd006e74c, 0xc358e8ba, 0x4af1b0ea, 0xa3b33e17,
-	0x143fc8ae, 0xba3171c6, 0x01ae50ee, 0x2c4c16fe, 0x901c23ae, 0xcb477f70,
-	0x794b5957, 0xe2d1f806, 0x5d747a60, 0x3673c16d, 0x28179b88, 0xec4fe432,
-	0xfa41ef51, 0x5786a5be, 0x7f4266de, 0x7fc04a09, 0x53e183bc, 0x54690ba3,
-	0x5e3c81ae, 0x81ae5412, 0x0e7ebd7d, 0x7e83a24f, 0x96adf23f, 0x1bcfa089,
-	0x0f28f9df, 0x82bf73ef, 0x2df233f5, 0xf9d243ea, 0xff6dfe9c, 0xe4fbd1cd,
-	0xa9f91cfd, 0x03251df0, 0xec9cafda, 0x3951b722, 0x2c8853ac, 0xad9f8365,
-	0x091b2ff7, 0xd91f4fd3, 0xa070af4a, 0x3ae3093e, 0x67bb13f6, 0x7e8dd400,
-	0xec496933, 0x949dde55, 0x17ee3773, 0x7d346625, 0x85d610b8, 0x4a7bb1df,
-	0xfcc14538, 0xee3b17d3, 0x9718236b, 0x373891b2, 0x9b898dc4, 0xd453f9a4,
-	0xf1899af8, 0x945e7255, 0x87ceacff, 0x79085f7e, 0x2c6c63f2, 0x8fce81bf,
-	0x823afd07, 0x848e58c8, 0xa0365938, 0x3df583d8, 0x4fe1f824, 0x588fff69,
-	0xb2ca7c59, 0x8fe2e89d, 0xb7160e65, 0xe2c9c079, 0xf062718f, 0xe22bb016,
-	0xd81710ce, 0x4b8f6d15, 0x0bcfee02, 0xdf709bae, 0xe309a0ee, 0x018b4fdc,
-	0xb517ec17, 0x5bc8255f, 0x6d7f6748, 0x7eb5dd2a, 0xabe4911f, 0x0bf7ee20,
-	0x9d3fab27, 0xbb8f304f, 0x801484fd, 0x0cc4dcfd, 0x3c744d4b, 0xd9839e69,
-	0x1573bfbb, 0x043a04cc, 0x1811c6f7, 0x38becc7f, 0xb9e3d013, 0xe056b91d,
-	0x4701178b, 0x66890f14, 0x5fd09dd7, 0x6f0a39e2, 0xf9673e16, 0x223c82fd,
-	0xfc77e29e, 0xee19768d, 0x1ada7ad1, 0x56f311bc, 0xbde1379f, 0xee4a2fc1,
-	0xf17f50e9, 0x3d02ecac, 0x305674fc, 0xbcf3e70e, 0x62f3e709, 0x2bd5fb5c,
-	0x0c0fdc29, 0xc12ef161, 0xcfd00446, 0xbe40a982, 0xae5f3e93, 0xafa6b1f2,
-	0xd11c8137, 0xc11c23fa, 0x29820c73, 0xcb48e51f, 0x276b6a27, 0x67d44f98,
-	0xfc0f0b66, 0x8b5d371c, 0x8879853b, 0x25284d17, 0xb04dcf68, 0x05ce788b,
-	0xbce199f2, 0x0f5544db, 0xb2b8fc4f, 0xbb07e584, 0x9ebdc30f, 0x7ef576cd,
-	0x739f7530, 0xd727ca92, 0xa16f0891, 0x245dd7ed, 0x4d27886e, 0x8fdfa8ba,
-	0x5f60ca78, 0x57fb514e, 0xf0855dda, 0xede89f38, 0x450d29bf, 0x2c3d6027,
-	0xfc008a20, 0x6862d934, 0x09d23b07, 0x9febf0f7, 0xfd50e03f, 0x19924cdc,
-	0xeda6c79d, 0x87e14d43, 0xb5fb446e, 0x5e037258, 0x0f95da76, 0xdfc03f20,
-	0xc5cb9222, 0xb1f29f25, 0x1721c37c, 0x2cae046d, 0x8769fca4, 0x50dd5cf9,
-	0x79d2b7ef, 0xf5903d5f, 0xfa087c0f, 0x93c7cae5, 0x8fdf4093, 0x95a5e957,
-	0x7f01df1a, 0x7f19e2b9, 0xca7786b9, 0x2c8ed3e7, 0x37934f7c, 0x67e83be0,
-	0x1f98188f, 0xf29bbf6b, 0xafc0d3eb, 0xfd04ed3b, 0x5ba59fb8, 0x699c80e6,
-	0x7caab4e3, 0xd5d72c6d, 0xbf0fdcae, 0xc0bfe4fb, 0xbec28dd6, 0x75e8a517,
-	0x83024fbf, 0xcfd72bd7, 0x68790698, 0xccf31176, 0x5173d452, 0x1e92fcd1,
-	0xdf1a2fc5, 0x9c59dab5, 0xc99fe348, 0xe1e5dfbb, 0x840be4f9, 0x8748b2b8,
-	0xcff1a2bf, 0xf7187f44, 0xe6122781, 0x67f9189f, 0x93fc3757, 0x40165e7f,
-	0x9fe1756f, 0xba7f8c43, 0x0fda1be3, 0xe4616bde, 0xaa1c779f, 0xff2dddbd,
-	0xfcf3c25c, 0xbe4ef7ab, 0x93657eec, 0x6a9f9f4f, 0x62d9c72c, 0x54bb2fe7,
-	0xea96efbc, 0xbd01ca6f, 0xcec4d531, 0xe32409ef, 0xeeef0a16, 0xfcdeed38,
-	0xefa86c9a, 0xda1e9814, 0x1ea33219, 0x78f769da, 0x669b7e30, 0x0557e761,
-	0x23ce044f, 0xe45afbb8, 0xd921dfe8, 0x587660ee, 0xfb8f0c50, 0x37f1ec02,
-	0x9d8c1f18, 0x2a43cb9a, 0xa662fa5a, 0x971d4617, 0xcfefc336, 0xbfccea3d,
-	0x06967c00, 0x79dfa3b8, 0xcf784a8f, 0x0951f552, 0xf76fe3f5, 0xf1045dbd,
-	0x79cf2d51, 0x8bb79ecc, 0xfbc2860a, 0xa1fedf8c, 0x8ead65ea, 0x5f404047,
-	0x1fddee1a, 0x4b1e71d7, 0x297e6f7f, 0x674e51f0, 0xf93ef1bb, 0x3fdb1c60,
-	0x11644d99, 0xb4719886, 0xdeb85ef4, 0xfcaf78cc, 0xff3b30ec, 0x27b0f336,
-	0x2af2bdf6, 0x37ef187f, 0x8a77f6a7, 0xe7efec13, 0x6841f65a, 0xdd6cc884,
-	0xd7354a0e, 0x26a33f30, 0x9349f81b, 0xf8a3fc43, 0x44327e0b, 0xb706bbf7,
-	0xd07ff3a9, 0xa9fbb02d, 0x4bee1222, 0xefb09cfe, 0x363aea82, 0x40f4c9ca,
-	0xe617eaee, 0xcb239c03, 0xcba06695, 0xd7162eb3, 0x5b0905f9, 0x6e6e81b2,
-	0x8253f701, 0x0bf93ca2, 0x223df3ae, 0xd3b10e94, 0xe27d3df6, 0x8ff8c246,
-	0x9c633d3a, 0xed099f60, 0x31bbe087, 0x824773e3, 0x588fb71e, 0x9aeb049b,
-	0xab853706, 0x13bd9b78, 0x81ae0d0e, 0x8f97c64e, 0x00c6cb3a, 0xd03be01e,
-	0x8e474d4b, 0x8d7be059, 0xcf7b821f, 0xe2883e30, 0x4e83e00b, 0x4016e0be,
-	0xa283c35d, 0xfdb7cfae, 0x8b42f88b, 0x17c8f46b, 0x7e70b710, 0x0b98be2f,
-	0x05f23578, 0xce3ce7b5, 0x505cf618, 0xc6937962, 0xe7b13fe7, 0x896efbe3,
-	0xd913de60, 0x6bbf6567, 0x7dc049e8, 0xd8b8df90, 0x1c9f6d98, 0x28a6a4cb,
-	0x7664e559, 0x2a3bf6bd, 0xda1cc223, 0xa2a8239f, 0xbced0db8, 0xdd27a87e,
-	0x31c8fe2a, 0x46fb838e, 0x033e3731, 0x1270d0ec, 0xcc236bd8, 0x87906125,
-	0x1989b65d, 0xdae63f60, 0xfcc36426, 0xfab21e5f, 0x5ed2584d, 0x9bfe5bee,
-	0x7da772ad, 0x66c3e9a5, 0xfc6d5bb5, 0x4c7f2a35, 0x2779d852, 0x70d1ebd0,
-	0x9003eb68, 0xc2e0e009, 0xdadf4db3, 0x22878f50, 0x00936f14, 0xfd878a0e,
-	0xfb04691c, 0x24a4df21, 0xb03b064f, 0x3800584f, 0x9d7ef6db, 0x92cef109,
-	0x021febd0, 0x3eda25bc, 0x0fbf5bac, 0x35b7b46b, 0x3ff3487b, 0xf3497b34,
-	0x82aec17b, 0x1fd532f6, 0xbed99971, 0x05b084d8, 0xe47853ef, 0xa2957cac,
-	0xe740b3ca, 0xe3cea251, 0x7082d266, 0x4ca9f769, 0x7251f153, 0x39abfa88,
-	0x54c84ed0, 0xeaa9878a, 0xdd532a7d, 0x6e22fbfa, 0x3efb1b1e, 0x9e9fad15,
-	0x1bae37de, 0xa3f61ad7, 0xc879687e, 0xf94feec7, 0xc3f98fbd, 0x7ef007e3,
-	0xb1dfd601, 0x09feec59, 0x21c3c317, 0x763af629, 0xf1eb9551, 0x9c0e48a6,
-	0xe7bfdec7, 0x1e6eb8ef, 0xf7f7f3d8, 0x771c8ec1, 0x97902042, 0xa8c4fe3b,
-	0x180fcc78, 0x695f232b, 0x6f3f7afd, 0x9cf611b4, 0xccdeff44, 0x728f0a41,
-	0xc167c025, 0x8f5395f2, 0x9dfd0a3c, 0xe8902a3f, 0x92451f73, 0xe5c42067,
-	0x1ddfd48b, 0x7b31c83a, 0xa83f6b4a, 0x11c7defe, 0x21216f95, 0xc567bb43,
-	0xa9e7451c, 0x1a1ffdea, 0x2f1ea75d, 0x74e4213e, 0xfdfc0fa5, 0x5a10e233,
-	0xaa9ce1fc, 0x9ff3490f, 0xf5ce7cf0, 0x600a778d, 0xc69f5fbf, 0xdc6a2513,
-	0xe9ea641b, 0x4e21c547, 0x6ff60d3a, 0x4e8f33f3, 0xb7e5bc83, 0xf4814c78,
-	0x99be7686, 0x3e16f503, 0x462abde6, 0xba1f5efc, 0x9955ef13, 0xa3e4cf1b,
-	0x5fc7f1a7, 0x3864f94d, 0x3b309dd0, 0x4bdd8f30, 0x81efa462, 0x1491ff3d,
-	0xbe3dda19, 0x91bfa3bb, 0x2a9caf0e, 0x9eac7dc0, 0xdbe461e8, 0xfe9e747d,
-	0x5377e12b, 0xbf8fc42d, 0xfac2ea9b, 0xac34beab, 0xddeafc6b, 0xd81264fb,
-	0x4e9f1a79, 0x337c6249, 0x49a3f76e, 0x2f49dec4, 0xc586de23, 0xc97ffe33,
-	0xee25d9aa, 0xa3e8d359, 0x843ae977, 0x2d27ea8c, 0xaa563790, 0x70fb3ac2,
-	0x4425da11, 0x5c62cf3d, 0xb7f366df, 0xda75014d, 0xccfeefd3, 0xf57acb94,
-	0x6fc5397b, 0x0eb00bd5, 0x99ab0916, 0x78ed531e, 0x9d231e0d, 0x08a523df,
-	0x19f0777f, 0xe708c0f9, 0xf6f91d4b, 0xda07ae0a, 0x18cce0ef, 0xc6262598,
-	0x8f868798, 0xc7ae8499, 0x8f5fbdd9, 0xdbd78c6f, 0x178ee7ef, 0xdad011fe,
-	0xe919bc9d, 0xf4d76c66, 0x900c1147, 0xec1fa58b, 0x29f1b993, 0x8ba2df48,
-	0x3ae85112, 0xcfe9fa43, 0x2b9293f5, 0xb956df91, 0xf8eeb3d8, 0x4f22faad,
-	0xf93b233c, 0xd87a6c4e, 0x5bb77c06, 0x1c41b7a8, 0xf4fb3af5, 0xc2bd103a,
-	0xe2660bcf, 0x131115fd, 0x94dad081, 0x886699d0, 0x243f7833, 0x20a1be78,
-	0xf0327fb4, 0x0b42abe9, 0xe76d59fa, 0xca387909, 0xd50a6cee, 0x6b2ec0d9,
-	0xf3e7664a, 0x5d10260e, 0x78c5f4fe, 0x8e9a6fa6, 0xc4a69d9e, 0x62ee1f68,
-	0x28833cfc, 0x9ff439c9, 0x7f29eb45, 0xc7dc1f80, 0x42927181, 0x325afdce,
-	0x39732dd8, 0xf6da23f4, 0x992d798e, 0x7b7adbc2, 0x2999ea02, 0xe9ddf74d,
-	0xfe0884a2, 0x6f3e2463, 0xfef0e32f, 0x8dd92284, 0x59c5a2f5, 0xf98df7e8,
-	0x09466926, 0xa220dfb4, 0xaf8533df, 0x755e2014, 0xabc38d3a, 0x9170f63c,
-	0x623df85a, 0x0e3674ff, 0xc093f971, 0x24a77d3f, 0x66fe0469, 0x07d5ac9e,
-	0x122eefe1, 0xfab6ff83, 0xcdfb73a5, 0x2cf57db4, 0xa78df30e, 0x3f8832b8,
-	0xd68a7f8a, 0x5baf384b, 0xc005a942, 0xf58a33d7, 0xaac31ee7, 0xd4ab393d,
-	0xfbd10246, 0xe50b9cf9, 0xfdb5a0fa, 0xf11dfc56, 0xf98122bd, 0xa37e7269,
-	0xe7b3efca, 0x9bbee924, 0xa9dd984e, 0xaa4dd5c9, 0xfaa8ddfc, 0x193d73cd,
-	0x094bf1ba, 0x40fe87b3, 0x64810bda, 0x7ed8b8f7, 0x96f6b4f4, 0x25e1f3c3,
-	0xd068dfbe, 0x310d3787, 0xe57cbdf8, 0x348be45a, 0xc8f78dce, 0x37edf5b8,
-	0x8dd7d58f, 0x0fd46bf2, 0x8f8b20b3, 0x3427aaef, 0x2f6b307d, 0x683c422f,
-	0x33c53e56, 0xbb7ac5da, 0x317d27bd, 0x7d1bae26, 0x17be4971, 0xfa2e90cc,
-	0xefe2e3e2, 0x4b7e2fa5, 0x54b196dd, 0x578edfae, 0xa4fecdd7, 0x298de83f,
-	0x81478efc, 0xbae8da8f, 0x47c18e69, 0xc5a3bada, 0x1ca88a01, 0xc5381ea3,
-	0x5ca663f6, 0x91fe274c, 0x0e80719d, 0x12ed423d, 0xa97b0c77, 0xe51b3e35,
-	0x68ef43ab, 0x2eca257a, 0xb87ef311, 0xda85325d, 0xc02e52a3, 0x2be10fd7,
-	0x2925ef52, 0x882b8482, 0xc19da61f, 0xa0579038, 0xcfae2cfe, 0x817f224f,
-	0x3b12e3fe, 0xaf68c3e5, 0x0ae87168, 0xe94f6697, 0x1e23a5f9, 0xc3dd9339,
-	0x1149f1aa, 0x7fe413e0, 0x04fb8f26, 0x7fd41bff, 0x8000b303, 0x00008000,
-	0x00088b1f, 0x00000000, 0x7cc5ff00, 0x55547809, 0xf579f096, 0x55492d5e,
-	0x146caa92, 0xb612f08b, 0x84582484, 0x5916ec80, 0xa014a358, 0x8168cb80,
-	0x9a126b0b, 0x69ee9c71, 0x0242a6ff, 0x83b74343, 0xe8cedad2, 0x3ad857f4,
-	0x08b41a83, 0xd09d0301, 0x584c5015, 0xf82e0834, 0x1a6d1ad9, 0x84490ed1,
-	0xbfbb46d6, 0x739cffcf, 0x2aaa4bef, 0xffff4d85, 0xb49fdf3f, 0xdeefb97d,
-	0x67b9ef77, 0x979ee73f, 0xb3559bdb, 0xf6e008ad, 0x14078a99, 0x77f1d000,
-	0xe042c022, 0xadacc37f, 0xc78ef016, 0x69fcd7be, 0xe7f80d87, 0x9c2ffc3b,
-	0xa42cfc90, 0x900bcf50, 0xce54b009, 0x7d57fc5f, 0x3c5e3d33, 0x52fe7a27,
-	0x92b9fd98, 0xf81b700c, 0xf71c30cd, 0xff8ec5f3, 0xc7154bec, 0x7e8b2e97,
-	0x4a4ce99e, 0xff8790bf, 0xbe230118, 0xd4ca0153, 0x22b79dba, 0x5527ddbc,
-	0x334c558f, 0x390ffed1, 0x350ffec5, 0x7c800c97, 0x1674df80, 0x3db1f8a7,
-	0x1c2111b6, 0xd1bad00d, 0xec71edc6, 0xefc5f107, 0x3c66e7e8, 0x21fc059f,
-	0x52b4b607, 0x4801b721, 0xc4ed1805, 0xff602745, 0x0d3f9e2a, 0xc02486c7,
-	0x5c2473ef, 0xe7af00d9, 0xf104e798, 0x5eb8c3bd, 0xe30dd700, 0xf75c01fa,
-	0xf72746c8, 0xe6e8db5f, 0x442e0dfe, 0xfac0066a, 0x37af2714, 0x8776f72f,
-	0xe35bdf1f, 0x50e7e6cc, 0xf844da3e, 0x7b2fe036, 0x1004086a, 0xac77afdf,
-	0x807494d0, 0xb1e2b72a, 0x01d1f566, 0x8e58e34f, 0xbe25cbf3, 0x102ab72b,
-	0x1fe5e7c4, 0xc4072bae, 0xee33575f, 0x2aa9f887, 0xfc368355, 0x63d34967,
-	0x0cdf453b, 0xdefa08d6, 0x33028e22, 0x86cd16b5, 0x28f02cfb, 0xf1f7151e,
-	0x6ff78936, 0x1d412af5, 0x278b79ff, 0x63871e9a, 0xae58bee8, 0x0ffe80b3,
-	0x47305bdf, 0x9d718609, 0xdfa29305, 0xd6757c5b, 0xfed8cae7, 0xe898b47c,
-	0xbf3fb63e, 0xb7744edc, 0xc1863fe3, 0x95fba230, 0x8d6fa58b, 0xc5ba3e85,
-	0x8e74b1b6, 0x9d16bf1d, 0x673a27ef, 0xc6ce9b5c, 0xce8b7ffb, 0x904e110f,
-	0x1bf470be, 0x30049e8b, 0x1a07e9bb, 0x55f679d1, 0x32add78d, 0x861433ce,
-	0xd4fe79d2, 0xb76ff859, 0xaafcdf42, 0xfe2d2fa6, 0xe79f6b82, 0x22bfed6f,
-	0x69fde745, 0xdf7e6f5f, 0x8034f3be, 0xf9ce78c1, 0x8df8d139, 0xbd2c6ba5,
-	0x62f7ca16, 0xe635b5e9, 0xa05d061c, 0x60689913, 0x555fbc1c, 0xd16b8e19,
-	0x162e97ad, 0x7e4f08ff, 0x5f8071ff, 0xd6fab9f3, 0x76827493, 0xe02057cd,
-	0x03c84732, 0x052075f2, 0x0ade5be9, 0xec0444e1, 0x3e738b96, 0x28f5a8d7,
-	0x39c469f0, 0x8353e7e8, 0xfadf6ace, 0xb2075765, 0x96fb19fc, 0x14b01069,
-	0x972173d2, 0xd255f0b1, 0x7e69233a, 0xcb68f980, 0x10b2d32e, 0x05ba639e,
-	0x9b51f5ee, 0x4e03da28, 0x9d1a07a1, 0xfbb75e26, 0x6e099b2b, 0xf0e57804,
-	0xf8406280, 0x09e7563c, 0x33218bd2, 0xc945fbf0, 0x9cdfcf3a, 0xdc048104,
-	0x9b76b41f, 0x2b44f90f, 0x3941c806, 0x825906d3, 0x9d64b835, 0xdc91f616,
-	0xa8347b75, 0xd1bbb946, 0xe048ef78, 0x6c92402e, 0xa99474fe, 0x0fde8b26,
-	0x79c54fb7, 0xfa6a1537, 0xb2e29c36, 0xf1a03fea, 0x93ab66ae, 0xf83eebde,
-	0x5a662dcf, 0x20f02be7, 0x335af084, 0x4f8e1532, 0xa4839873, 0x93d4ca37,
-	0xddfb09aa, 0x8fa4003d, 0x970b2da6, 0x3a6dd200, 0xb138d7b4, 0x8c74429d,
-	0xd0bfbf43, 0xde843379, 0x9a74881a, 0x4334e921, 0x6692abea, 0x4946f595,
-	0xac841a92, 0xb374fd3e, 0x408cd1a4, 0xee0a497b, 0x3c53433b, 0xf9bfd835,
-	0x8fc516aa, 0xba3e932f, 0x951f4fb1, 0x3dbdf5c9, 0x019686ba, 0xff344266,
-	0x3d0a3596, 0x798b6254, 0xbe0fed2e, 0xe6557cc9, 0x429f1e8c, 0xfbf913ba,
-	0x825e8c62, 0xa653fb18, 0x03b935fe, 0xc58af0f1, 0x8454defb, 0x19b4e7bb,
-	0x70e7c59e, 0xfb933b11, 0xc631a7e3, 0x07b6c51e, 0x757a270f, 0xe215eb84,
-	0x07f50723, 0xd7b1f579, 0xa3b63f9e, 0xf18e98a7, 0x0d22dd4a, 0xcf2d99b2,
-	0xf0fb33ba, 0x92bf0fde, 0xad78b10e, 0xdbde7a97, 0x8e8d7ce8, 0xad8f0fdb,
-	0x979ed8b3, 0x48d749fc, 0xf8bdfdf5, 0x95e5e434, 0xe25e890b, 0x0c2e57ff,
-	0x4afdb2f2, 0x0c3e59d2, 0xfe783879, 0x51e92272, 0x21aea7c4, 0x6cb8f49f,
-	0x9f99679e, 0x06841c85, 0xc36e0a8e, 0xc12485fe, 0xf624aff7, 0xbc23cf1c,
-	0x3cf262df, 0xeb68db4b, 0x202a2f87, 0xd175b9fd, 0xe2803379, 0x2887e505,
-	0x84ee8a4f, 0xa00db1bb, 0x05ff113c, 0x72482152, 0xd0108662, 0x785e35be,
-	0xd319da9a, 0xfbc214f4, 0xddb35c65, 0x29e9eb41, 0xd7f0f7c4, 0x057d132b,
-	0xbf5ff1fd, 0xee1a7c11, 0xe6d1b0d3, 0x1c2f50d3, 0x7ee4e8d8, 0xb73746e3,
-	0xdcea3687, 0xfc913a6e, 0xaa1ff243, 0x169f16bc, 0xa5e657a1, 0x0330fd0a,
-	0x35c10ef5, 0x00609403, 0x23c66f79, 0x7288f2c0, 0x10a4dc10, 0x393cf0bd,
-	0xfa44f87d, 0xe888ee5c, 0x3b56ad43, 0x82a59321, 0x67985ee9, 0x09d1f7e2,
-	0xd59f3e08, 0x3fd23e7f, 0xfc8cbfaa, 0xefc38416, 0xb0b996f2, 0xb37c390d,
-	0x7adf885d, 0x4bd1e965, 0xf4b9fdc0, 0x43b95ebc, 0x8feb84bd, 0x1f84cf0f,
-	0x8f18bda2, 0xe2bc2184, 0xff045dcf, 0x100b1684, 0xb2b0d07d, 0xf21a167c,
-	0x5ca2b5f9, 0x8448fdc0, 0xef8c1bbe, 0xc4c3cb59, 0x23a0074f, 0x645ef08d,
-	0x7e49d9f3, 0x3f04b997, 0xdddb9578, 0x3937ae0a, 0x0951e2c3, 0xf1bee1b4,
-	0x2d7f11eb, 0xce21b819, 0x1cc9696f, 0xb713e7a2, 0xc93ef1bd, 0x08e6d7b7,
-	0xcc986cab, 0xf6111d9d, 0xe33c007c, 0x74927f24, 0x476877dc, 0x0e4e3f5a,
-	0x6abb9eb0, 0x6b5e9209, 0x09ec933d, 0xafd33ee3, 0xacbfd8da, 0x6e5117a7,
-	0x8f26270f, 0x42133d65, 0x63f2430d, 0x6d98e713, 0x3c23aff6, 0x7a3e65a0,
-	0xedfbdf0a, 0xafd20065, 0x543fdbd3, 0x312d0fc9, 0x40e80ee5, 0xa32a8f38,
-	0xf27da853, 0x6e7ce4e3, 0x127724cf, 0xec9b0e7e, 0xcefbed3a, 0x0474bd46,
-	0x8da9cbf2, 0xf9023a50, 0x368dade3, 0x746f4f6e, 0xa3667b72, 0x38a3db9b,
-	0x3af3fc4e, 0xbd7f138e, 0x6fd4e381, 0x4f6a71c3, 0x7ad43ae0, 0x489872df,
-	0xe5bc677e, 0xbc2da8d0, 0xfadb892b, 0x742c933b, 0x50c9c38e, 0xfc4fec67,
-	0x370c4e14, 0x2ee50780, 0xdb53fdd5, 0xad3f680d, 0x1c6502fe, 0xf754d4c0,
-	0xae3a6d5c, 0x8fe87b3b, 0x19f1c2be, 0x6a7ec3a9, 0x3b6f7843, 0x893868e3,
-	0xf5c7d2fd, 0x3f883a9f, 0x92a2244f, 0xb7643c24, 0xc7365179, 0xc418d293,
-	0x24c2f768, 0xfd19a7ec, 0xc8a5b9ec, 0x3a4a4b0a, 0xb005c0f2, 0x73e1b1f3,
-	0x25df886d, 0x513fff76, 0x9b6812df, 0xfa9d3a53, 0xbc927010, 0xcb20e62b,
-	0x7d2510fb, 0xadbfda11, 0xd4c4ff0e, 0xabc07f08, 0xf48d21fc, 0x02af44c3,
-	0x77a674ae, 0xf7d2a470, 0xd5b798dc, 0x15313651, 0x2ed7f7f9, 0xc269f995,
-	0x741bc534, 0x635f97f4, 0x7af384de, 0xe26fd129, 0xd4b559c5, 0xe2e3982e,
-	0x4dd96fbe, 0xa5ff24b5, 0x5fbd6b8e, 0x5c87efc2, 0xc547d666, 0x638bce1a,
-	0xe3798d17, 0xffc8c991, 0x0c4b69ee, 0x7d7c4b3e, 0x84935fd6, 0x567732fd,
-	0x34752aa1, 0x6bb5df70, 0xbf978d1b, 0xe572c0de, 0x59e8f249, 0xa5ed8ac4,
-	0xd33e3869, 0x24c278a1, 0xa93ed32a, 0xa771a34d, 0xcdb421e2, 0x553b8ef4,
-	0x5423e344, 0x9fea4ccf, 0xd89d4bd5, 0x4e66d19e, 0x66f384bd, 0x6c78a4e7,
-	0xf099def8, 0xff10ae8f, 0xf249ccce, 0x1714e824, 0xa4ae9f04, 0xa9eac7be,
-	0x8f1ce9d6, 0x3ad32495, 0x6131e2ba, 0x92d6febf, 0x147045ff, 0x514052fb,
-	0x91a5dc68, 0xc7e4fb1f, 0xe275293f, 0x0aa1fabc, 0x099cfc90, 0xe091fee7,
-	0xa89ad99f, 0xf5402027, 0xbd296716, 0x9c516f57, 0x2befb89b, 0x5181f9a1,
-	0x5c79fd66, 0x769de4f7, 0x6fe507b6, 0x745fb3e5, 0x6cc1cef2, 0x9adfca17,
-	0x49ed4c56, 0xcbdbf093, 0xc39f2adf, 0x930826e3, 0xebbf2952, 0x1dbdf81f,
-	0x4d293f25, 0x0c4ff5c7, 0x416eb173, 0x116a953a, 0x83e70d7a, 0x55dfef42,
-	0x945bf3c1, 0x8f3a3f01, 0xa7e4aff3, 0xff715a14, 0x5109e959, 0x710ce7f3,
-	0x8de7f545, 0x45aa5818, 0xfcf2b1d8, 0xadfea8ac, 0x88e94a45, 0x69bef988,
-	0x45fd5109, 0x11d2aea5, 0x2b6ff311, 0x5fd5181f, 0x54565b72, 0xb269a67f,
-	0xa11b1fd0, 0x7dc854bc, 0x9bfb2979, 0x0a87acd9, 0x1bee629d, 0x8e3f7e38,
-	0x7f09b617, 0xfe85d0aa, 0xb4a5d214, 0x80fd88ad, 0xc68f7c36, 0x8f52ec8b,
-	0x3ddda005, 0xfc80ec91, 0xf62fe209, 0x6677658b, 0x6305fa3b, 0xb768ae89,
-	0x752fe023, 0xfaf1db44, 0xcc27e144, 0x0bad7f01, 0x75a739e9, 0x6557fb1e,
-	0x6145d5e9, 0xbf467c20, 0x2a370b1f, 0x13779dd1, 0xac6ab61f, 0x890ce737,
-	0xd4adafd9, 0xf48c7ec1, 0xb7c8e6ef, 0xe0217d8c, 0xc6ff276d, 0xffb18738,
-	0x4733ceb5, 0xe17ec69d, 0xacd73adf, 0xa9a5859c, 0xcf5fe171, 0x9c2c4cfe,
-	0x4f32a979, 0xfb15fe81, 0xeca9ad85, 0x7a4fe22f, 0xf0c13f3c, 0xcf51ca7f,
-	0x9cf522b9, 0x585f4943, 0x673d6d70, 0xff2d7bac, 0x78d758cf, 0xde54ea1f,
-	0xf7bf78df, 0x7fc4aeb9, 0x27e71bbe, 0xae9e79c5, 0x5cfe7fc4, 0x9a19fcf4,
-	0x7940e35e, 0x278a0e3e, 0xa93f7840, 0x959ae46b, 0x52d6f59c, 0x5fa1f65b,
-	0xf670b723, 0xb52d40f9, 0x27833b53, 0xb9fe78ad, 0xf94eaa39, 0xea2fc307,
-	0x0aa56717, 0x55f8e47f, 0x78e3aedd, 0x53b7407d, 0x88ff51dc, 0xaaf8a76e,
-	0x28730bde, 0x370ef48e, 0xc438a7ad, 0xf62d879b, 0xfa154def, 0xdf7c857e,
-	0xfea90f68, 0x857f0415, 0xf251e3ad, 0xe9bf2a49, 0x1c5f10b1, 0xbf2f7f27,
-	0x5c77bfbf, 0xbf683a0b, 0x1d048fe3, 0x7e7d08be, 0x22defebd, 0xe20ca662,
-	0xa917c553, 0x096c4a4f, 0x51fd48be, 0xf54574e6, 0x83ff93c7, 0x0f76cdef,
-	0xae6f7a8c, 0x0f35159e, 0xf21cd8fd, 0x902c6a87, 0x353e91a3, 0xcfc87a25,
-	0xefe3c58b, 0x0e3df9e5, 0x6051b927, 0x7f55d74e, 0x29e4fb1c, 0x7d8bf811,
-	0xc4553dbe, 0x9ec88373, 0x52273ae3, 0x556b6e75, 0xd0e6709f, 0x887e267f,
-	0xbaac63ed, 0x95c3d68c, 0x1e77c4dd, 0xba0ae9bb, 0xe3d2f0e0, 0x686ae7f3,
-	0x4de33dff, 0xfb1c38ff, 0x215f1ec7, 0xfb4d53fa, 0xfadfb1b2, 0x7fa27df8,
-	0xd9bc69a3, 0xb819ec83, 0xf9296e7f, 0x7fbee90b, 0x9b75fa27, 0xd4155b1d,
-	0xa8099503, 0x4cd5b0d7, 0xf7a6140a, 0x2ddbc7c5, 0xc0915f68, 0x175e6cc8,
-	0x156ec0d2, 0xc26574f1, 0x13d920d0, 0x13abd8ad, 0x0c132ade, 0x9264777a,
-	0x09da879d, 0xdd9d7151, 0xfbe1ef82, 0x0bff3665, 0xc9c26f82, 0x87a5ea3a,
-	0x200d960e, 0xea9138fe, 0xede43c64, 0x7d26ea9b, 0x21edf085, 0x01fffefb,
-	0xf078e6be, 0x3ec59ad5, 0x2579f59d, 0x86f38f64, 0x3e947921, 0x3a6a15fa,
-	0x21084f3f, 0xeebfb0ef, 0xb1fe5375, 0x90f165c6, 0xf2427eff, 0x35b6f5ef,
-	0xdaa18f32, 0x29a91f05, 0xb17bf5a6, 0xcff25b7d, 0x6a2fb919, 0x910ba1be,
-	0x33d9c03f, 0xe8815174, 0x6aa87f13, 0xe1f90f61, 0xe490ff3d, 0x83f9f8a1,
-	0x183f8144, 0x8fd1f3d2, 0x777bf9f1, 0xf1b679e7, 0x65a78173, 0x0e9aecc1,
-	0x06b38fec, 0xe3fca06f, 0x47ff34a1, 0xad3b8784, 0x87cc91c1, 0xb449f58e,
-	0x8e05e28f, 0x0ff88c53, 0x32dd3ce3, 0x705c7fbc, 0x46c1fded, 0x64e96576,
-	0x7f637781, 0xe88db1c4, 0xf124def1, 0xe10780dc, 0x303e26e8, 0x0785eae0,
-	0x8f393886, 0xd4ff2200, 0x2e8be325, 0xa7ec8f5a, 0xdc7910ea, 0xff38983f,
-	0x8ac24552, 0x4de77dfd, 0x791a0f1c, 0xfb1022e0, 0x49b53e4d, 0xf803e065,
-	0x96a2513b, 0xcb5c695e, 0x7684fdf1, 0xf6fe262d, 0x2a9d3db2, 0xd5a9bfdf,
-	0xf6a0e25f, 0x5379e8fd, 0x093f1c65, 0x59c52a82, 0xc6623b93, 0x467fe71b,
-	0x18bd4feb, 0x4d293cfd, 0x3041c3da, 0xb24f3228, 0x974dc641, 0x10a7664f,
-	0x2b186b1f, 0x8b0f48a8, 0xd4a4c2ae, 0xb0d33d3e, 0x4959e711, 0x2db8da9f,
-	0x8fbceb38, 0x88dc69f6, 0xf49a3f0c, 0x435b9baa, 0xc2ce0aee, 0x623630bd,
-	0x0617291f, 0x2fbf2f1e, 0x23ae38f0, 0xb0d397e7, 0x43356e6f, 0xc3c3ef50,
-	0x0c2f8914, 0xbbfe38df, 0xf6c1d17c, 0x62db626b, 0xead9e495, 0x711e8136,
-	0x113d04be, 0x6c7d08f4, 0xea8d49cf, 0xb59e92ab, 0xca7ed109, 0x924fb978,
-	0x7ad45067, 0xd062bf86, 0xacea50f3, 0xc663f256, 0xdfb1563b, 0x3b293292,
-	0x93a2fd6a, 0x042ef8d1, 0x63e2979f, 0x71c087cf, 0x5ab3c4c0, 0x29327f94,
-	0x63f983bc, 0xcfd187d2, 0xee8f9ca7, 0xfcc9a697, 0xaedd2c56, 0xfb184f85,
-	0x7fe969cb, 0xde5d3e3f, 0xcda67c68, 0x8667c689, 0x039f1a2f, 0x6be34596,
-	0x1f1a3fa0, 0x898d5783, 0x7d61bf1a, 0xd87f5461, 0xcd44a70f, 0x198342cf,
-	0x75be1fd9, 0x91fcd45e, 0xf545163b, 0x67753f47, 0xe0dcfcd4, 0xbcf1a88a,
-	0x2efe6bdd, 0x368417fa, 0x3427cd44, 0xfe87be9b, 0x4bfe3637, 0x53ff7ed4,
-	0xa18daff4, 0xe7d256ff, 0xa85e8813, 0xecfb0b37, 0xa425b919, 0x6f4d5d3f,
-	0x9b79437c, 0xf9ceb140, 0xf03cc0aa, 0x2fd8e0d4, 0x7a429f54, 0xdaa2306e,
-	0xd6a37a84, 0x1ec8ab04, 0x71326a3c, 0xf390d31e, 0x3f84d317, 0xc89a62f2,
-	0x7b78197b, 0xd922ed1a, 0x43ea5541, 0x248efa73, 0x935453f2, 0xfec9da09,
-	0x1fd61e69, 0xbe101ce7, 0x0755f719, 0x4ac5e701, 0x982d2792, 0xbea8fc88,
-	0xa9fc72a9, 0x8e83f20e, 0xe4e6a4f6, 0x9f8453ce, 0x4e9b0e2b, 0xfaa6ab7c,
-	0xf0df6403, 0xa1e7a19c, 0xdef39fbf, 0xf1495846, 0xe65fd196, 0xe699bf5e,
-	0xe67bbb2f, 0x7b7f8a48, 0xacaddf9f, 0x43a08d2c, 0xc51739e4, 0xa40eabf1,
-	0xd867fb09, 0xdc7ec313, 0x3a6bd569, 0x538c3ed0, 0xbb407d85, 0xf10d2071,
-	0x88f281f1, 0x0169f859, 0xed1f9d33, 0xb827df2a, 0x80df21d0, 0xdd9f4a6d,
-	0xe643bfd2, 0xda3b20fa, 0x00937d6f, 0xf74438a3, 0x1de33df0, 0x955dfe86,
-	0xecbbf8cb, 0xf97f9e88, 0xaf02e1fe, 0x90f620f7, 0xe22ce70e, 0x17fc063c,
-	0x42fe5ea5, 0xd24ee5ea, 0xebf911c7, 0x2676bb55, 0x2e7e7f91, 0xc6e3f847,
-	0x3a49dff3, 0xe54d2eff, 0x9dddaff3, 0x047cfeb0, 0xae422ade, 0xe3557ea8,
-	0xf991f5c0, 0x39c6b5cd, 0xe7468afc, 0xa8e52758, 0xf923b5a2, 0xfe7f604e,
-	0xb75c34c3, 0x7b95d772, 0xa6fbd00e, 0x67614c9e, 0xd2dfbc03, 0x82e380f7,
-	0x28817fa5, 0xcd33b6bf, 0xa67570cc, 0x09613889, 0xbbe44e36, 0xb803e825,
-	0xda637da8, 0x7c3fe22c, 0xbfb0561e, 0xa4cc15a0, 0xb3fa16bf, 0x33f484cc,
-	0x3f6779e0, 0x69cfed1e, 0x1b73ef3a, 0xfb7ef8f8, 0x922a7bdd, 0xd6340fd8,
-	0x8141d633, 0x3def3f20, 0x499cc057, 0x0ae99f79, 0x9fb817fb, 0xeefb9e8d,
-	0xec99bc1e, 0xbbdfb1b0, 0x0ef4bfe0, 0xf022c5f2, 0xfac6baf0, 0x1134d740,
-	0x4b03f97a, 0x44ed1d2f, 0xa66d0dbf, 0x3685e530, 0xbdf2b39c, 0xcf75774a,
-	0x9c230fcb, 0x66f9af1f, 0x7f7082bf, 0xbfe7bcb4, 0x3bf3e00e, 0x4741529e,
-	0xfdd9f1be, 0xbc447a5a, 0x2bfeee79, 0xafe86f2c, 0x2924ff3c, 0x1eac97a5,
-	0xd60f9392, 0x322a34bc, 0x9f4e485e, 0xf74e9099, 0xe2d2933b, 0xc6c46fde,
-	0x3f886ba5, 0xf6757e59, 0x5cbe0d4b, 0xc372f92d, 0xf9f9a30b, 0xf3dea486,
-	0x2af3fe88, 0x3436c1e7, 0xf1af395b, 0x3587e48e, 0x31337e2f, 0x8f57cf32,
-	0xa95ba97c, 0xf74b7275, 0x09fa3aa6, 0x1e5e4efb, 0xeaab71cb, 0x1e73a2cf,
-	0x3269fabe, 0xf9bdf7f5, 0x6e079f2d, 0xbbf83ebb, 0x78917911, 0x79ea4aae,
-	0xc54af497, 0xf94eab01, 0xb90392ac, 0x7ec2ee27, 0x1fea2b65, 0x5725cf3c,
-	0x29a7b1c7, 0x00a83b1e, 0xc32ab7e5, 0x2be4ac09, 0xe520941b, 0xee34d6c3,
-	0xfb1832dd, 0x1616ea6b, 0x2556bb11, 0x59567d0b, 0xb13704af, 0xe9873e1f,
-	0xa365285c, 0xbfee50e4, 0xd778e3e5, 0x85feb171, 0x3cf6b08d, 0xf55d9dc6,
-	0x38205e5f, 0x395a35d6, 0x292176cf, 0xfb8c196c, 0x84abda5e, 0xdc9f7a02,
-	0x1c44b976, 0x98f42ab6, 0xf55df685, 0xe411c2dc, 0x381d7636, 0xb93d216d,
-	0x59b1e1aa, 0x309179f2, 0x8b9641ff, 0x9595bbb5, 0xd5ac7991, 0xa4420ee8,
-	0x02f842fd, 0x40eafb13, 0x2cfa494e, 0x435e1a6b, 0xb6bd42e8, 0xf58569ff,
-	0x97e242da, 0xf9ef0e0f, 0xdf686fdd, 0x923dff83, 0x7d745ff1, 0x805f07f8,
-	0xb94a8bfd, 0x633c5c0f, 0xb2b2f8a1, 0xde217cc1, 0xba6352fd, 0xcfda1eef,
-	0xfd638f88, 0x10162dee, 0x10d93ff7, 0x82ec9e7c, 0x1cb2c7a3, 0x9a57f9e1,
-	0xce68f080, 0xec0acb1e, 0xc8ce48db, 0xc11db85e, 0xbef57178, 0x84f18d74,
-	0x78fac4b1, 0x3921a0f7, 0x5877a25e, 0xe9579f28, 0x5f10b4ee, 0x173f8657,
-	0x9f8dfff7, 0x89c6f2cc, 0x574e5fb7, 0x273f33a4, 0x6437de4a, 0x30b9618c,
-	0x90c3daf7, 0x60bee58d, 0xa9d90f45, 0x3b91070d, 0xbfb7a214, 0xec0ee087,
-	0x7ce9d04f, 0x9f3e0725, 0xcfb111d8, 0xf47ca51f, 0xf95e59e6, 0xf099ac64,
-	0xb193efb9, 0xf3df525a, 0xaac74cae, 0x97997978, 0xdedd85d3, 0x18bbec9c,
-	0x9e09072d, 0xd95bee30, 0x147be764, 0x2d2d8394, 0x70729145, 0xc45daac7,
-	0x07aa4de7, 0x1b2a0225, 0x79abfa17, 0xc887927e, 0x0cce36a3, 0x4eaa1f10,
-	0xfc27f31f, 0x289bf715, 0xff508fef, 0x3ff74dcd, 0x39ac724d, 0x1e646560,
-	0xf1d4d2a4, 0xe88516ab, 0xa26bc3ba, 0xf5810afd, 0x75f0ea96, 0x94553c70,
-	0x7bdc53a9, 0x202cc274, 0x59bcfd3c, 0x39afbce1, 0x8b35bfd5, 0xe55c7be8,
-	0x2fa396f9, 0xbbbee804, 0x11141c6b, 0x7f79c67c, 0x2a0c2e3e, 0x00b9b3ae,
-	0xe6edb43c, 0xc4dd4b83, 0x38cf3fbf, 0xdd867ec6, 0x2bd20213, 0x503fe835,
-	0x1f9ec7de, 0x093ad30a, 0x1522be39, 0xee9359f7, 0x58b4be64, 0x27ca1efd,
-	0x36fb203d, 0xe08ab7cd, 0x8a27a5b3, 0xf5c87bf8, 0x48baf9e5, 0x6f74cdfe,
-	0x4b7ce7e9, 0x69f05997, 0x71c00dd7, 0x4cfcd722, 0xe32f21a6, 0xb83b06cd,
-	0xd6546aad, 0x44d7da46, 0x79e8dbf0, 0x1ea5c1d7, 0x2d9cdf82, 0x91333df9,
-	0xff7622e5, 0xa99f888f, 0x62b4c0ce, 0x99e1166b, 0x9ff7a6f0, 0x7be4a1f7,
-	0xf9a01f03, 0x115e4873, 0xfcbc6f54, 0xf8bd3f92, 0x7375d12c, 0x95c72faa,
-	0xc2bcd7cf, 0xc6277629, 0xff9c3b95, 0x31b7c901, 0x89f095bf, 0xfcd16fef,
-	0x51efc236, 0xc5b35f89, 0xfe593ba7, 0xdfed3a7d, 0xf141be7b, 0x3c8df7cf,
-	0xff6c96df, 0xcfef9ef7, 0x54e67cf2, 0x2f5a37e4, 0x399e7819, 0xfe201839,
-	0xa2824dab, 0xa8f8f84d, 0xe49b966b, 0x6f91cb6e, 0xd7bc9286, 0x40dc7926,
-	0x9be6b179, 0x6fdc9196, 0xf3277419, 0xe42f17ff, 0xfb11aa16, 0x7f17a724,
-	0x2f3be745, 0xe2c5b1cf, 0x7c73a1cf, 0x9c69cf2c, 0xefba496b, 0xf911e92f,
-	0x7e921826, 0xd7b3fc5d, 0x7194d7b8, 0x61da479e, 0x8f38f38c, 0x5c890dd8,
-	0xfa57b67f, 0x98f81ae1, 0xd1e0ec7f, 0xc2f2bfd9, 0xa92baa09, 0x36c13169,
-	0xb5253e3a, 0x92fdee22, 0x0c119355, 0xb2186d7a, 0x8d3435d3, 0x39d89f3b,
-	0x3ee116af, 0xf8550108, 0x0cf9d169, 0x255e2af0, 0xdaf18f32, 0x63cbeb9a,
-	0x21afe33c, 0x63cd8d79, 0x969b0e4c, 0x23ae525b, 0xbcdaf19f, 0xd18cf9b8,
-	0x5171d119, 0xc0ce8641, 0x7f047285, 0x4189c286, 0xf1833791, 0x26eabf94,
-	0x9fe3855b, 0xde5999e3, 0x9b1cae95, 0x13e0ed0b, 0x3adb6c4f, 0x8470e50d,
-	0x6bf503c0, 0xf1f5c988, 0xe6f507ec, 0xc31b5e47, 0x3dea387e, 0x4e02f395,
-	0x1d0c4b09, 0x137fd08b, 0x2a27a541, 0xf63e12bf, 0xdbf1326d, 0x2dfd549e,
-	0x9b4f4fa2, 0x092875ca, 0x15c5875a, 0x900eee47, 0xe076807f, 0x3e84339f,
-	0x7b8a35b7, 0x65ee9b4b, 0x74e0993d, 0xe423538e, 0xd8432f24, 0x1f638aa5,
-	0x2ca0b50c, 0x4c9d325d, 0xd7f5c7ce, 0xa64fafed, 0x73dade34, 0xd2a44f6f,
-	0xff353b9f, 0xff3c0c82, 0x51aeca17, 0xb75bf236, 0x7e12c706, 0xae6ce142,
-	0x20d02ccf, 0x87f615a0, 0x3c29eaa7, 0x9504ba14, 0x5b71a54f, 0x257e34d0,
-	0x58555ff1, 0x30f6979c, 0x6dcc8aa3, 0xd5dfb854, 0xeb4a9358, 0x79b6fd55,
-	0x97afe910, 0xf39f8432, 0xf13cd5e2, 0xcd1a06be, 0x25c33fbf, 0xa2682a99,
-	0x324be37c, 0x5575d94f, 0xfec679e5, 0x55338d05, 0x7e41f227, 0xce11c778,
-	0x7559368b, 0x73c26fa2, 0x94d1f020, 0xd5687ec0, 0x7640d9e1, 0x1e05dbaf,
-	0x24f7c705, 0xfc447cf6, 0xd56cd3d0, 0xc1373ee9, 0x715203b9, 0x1eb23dfd,
-	0xb619172c, 0xdcf7d1de, 0xe9a12fd8, 0x24439497, 0xe57be0be, 0x4c076d04,
-	0x3be24477, 0xc959d849, 0xc3127b57, 0xe967ba26, 0x59efdf41, 0x4e0fab86,
-	0x380d7de0, 0xec0ed973, 0xf85cf4b1, 0xe5c33a71, 0x05c83e24, 0x8d342701,
-	0x26af49d6, 0x8e7cbd38, 0x09eea704, 0xaae1fd28, 0x208e8b1a, 0xa4a3cfca,
-	0xc9f4a6cc, 0x5f625577, 0xb0b286df, 0xfca41b27, 0x9d2b6eb7, 0x8547d916,
-	0xfdefa933, 0xf8e278ff, 0x9c21dab6, 0x48a80bff, 0x49b63b7f, 0x214e74a9,
-	0xde122857, 0x0781428c, 0xdbb40baa, 0x7cef78c4, 0x2a4773e4, 0xe79e7fdb,
-	0xf3ed3ab1, 0xf85e58b2, 0x0ff0d17e, 0x17c2521f, 0x76d2466e, 0xc94be63e,
-	0x9a7573c7, 0x875c3c8e, 0x3cb8fef3, 0xfd8c2a34, 0x79ffab16, 0x3f57cfe2,
-	0x80bdb15c, 0xb31eeff4, 0x4ff49ca7, 0xf671e047, 0xeb345fcb, 0x0ee422db,
-	0x7264f486, 0x3ecc61dd, 0x3d36e755, 0xf776fe4e, 0xfba74541, 0xcf736ef4,
-	0xb2bb8250, 0xd50b33e9, 0xfc1d5663, 0xb2ebfd84, 0xda5eff4c, 0x3563526f,
-	0x864dcfd7, 0x873f5c1d, 0x20eb917a, 0x4fa16e43, 0xf51d9f2e, 0x1d04756c,
-	0x06f293de, 0x6461fe3d, 0xbca49abf, 0x1c38a61e, 0x772dfddb, 0xf7f5a70c,
-	0xf180fccb, 0x191c355e, 0x04df784c, 0x3c6b71af, 0x5c6a0eef, 0xaef79cbf,
-	0xc46f5eed, 0xfe52d3fc, 0x56fdcb4f, 0x20dffa67, 0x7cb6d778, 0xc2d2a16a,
-	0xa1a1f3aa, 0x3486f714, 0x4719c53d, 0x6fcaf48f, 0x69553c8c, 0x5f9a163d,
-	0xaf581175, 0x536bbd20, 0xbd2f7e90, 0x396638db, 0x348fdf3e, 0x8b3b2149,
-	0xe3d92af1, 0x60df66fd, 0xcefd5f9a, 0x8f4963d7, 0xf020241d, 0xaf375f7f,
-	0x4378461d, 0x244e2ffe, 0xac0bdb39, 0xcd390cd7, 0xf7c53927, 0x8bff89f3,
-	0x7acb9fa8, 0x7da58f79, 0x7ee5cb1e, 0x225c9013, 0x203cb3ff, 0xdfc93bff,
-	0x3ca277cb, 0x59a3fbf0, 0x9bb4f7ce, 0xa337ecbc, 0xfdc91f5e, 0xdfd4c5e2,
-	0x64ea5ed3, 0x843aa739, 0xf0d79242, 0x04275e11, 0x45f2d740, 0xfd22f80a,
-	0x648cbcff, 0xf1242f71, 0xd8433939, 0x9e8e5083, 0xd873c1e2, 0x3e4a3555,
-	0xe8a5ec22, 0x9a5a7b4b, 0xbf6d97f9, 0x26524698, 0xda5384ed, 0xd678ff49,
-	0x6d28fffb, 0xa7d786d5, 0x73c3a82c, 0xf2a5386e, 0xf71961f8, 0x1c9f2585,
-	0xb21af991, 0xa89a7a1b, 0x13e7a61f, 0xe5f54fb0, 0x4bebbd13, 0x9a4d1cc8,
-	0xb528e3b3, 0x12a17c53, 0x2da6db72, 0x166a3f6b, 0xfc479e62, 0x6e6470d7,
-	0x75e3d51e, 0x0242b39f, 0x6df0d882, 0x222f47cf, 0x8c3e1e1e, 0xa7638ff8,
-	0x7fcc38f0, 0x060d7fe8, 0x6ef1ff77, 0x4091ea45, 0xc7e27cd2, 0xafb506ae,
-	0x2254808f, 0xfddf5363, 0x007b7da4, 0x677fe76d, 0x2267077a, 0xf00ccf3e,
-	0xfa7ddb73, 0xcb124cdb, 0x5c4567fd, 0xe6f160df, 0x6434ff11, 0x871ba863,
-	0x2299ad4f, 0x856453ef, 0x379cf7b8, 0x18390a67, 0x0aed8015, 0x33aaebc7,
-	0xd4bf7488, 0xe82d7aa0, 0xc0845d2f, 0x6fa4a992, 0x01f75e64, 0xfc5e3f90,
-	0x283cfa45, 0xdf900fbb, 0xc1eb7682, 0x11d6c45f, 0x316fd978, 0xeb0058f2,
-	0x2b5fc44d, 0x0ff8149b, 0x67aac5c4, 0x93afe7a2, 0x1babf275, 0x8c1b1d77,
-	0x5cf35d74, 0x2df938cc, 0xe211ff7c, 0x5d5d7878, 0xcdc33d74, 0x197fd299,
-	0x7fc9c30e, 0x3d62be41, 0xd5a0d661, 0x60ac7c8a, 0xf6224314, 0x0be04992,
-	0x67cb2bf5, 0x8a6f61be, 0xb9ea5e85, 0x94a75c04, 0x94743bbb, 0xd4a681ea,
-	0x8f687965, 0x9f189a29, 0xee2598d2, 0x4aa0b4a7, 0xbc930c75, 0x77ec59fe,
-	0xa967bc07, 0xd49564de, 0x5fc4e097, 0xd3c8fbca, 0xddfe92af, 0x9d6c60ea,
-	0x9553c0a8, 0x8219379c, 0xcaefb435, 0x69dea2dd, 0xf9e8eeed, 0xeb4f1255,
-	0x8c7d3a9e, 0xa11585d2, 0xa7897198, 0x3a98c6aa, 0xdc38b116, 0xadef299f,
-	0xf5fb7d64, 0xd1fc5bd6, 0xb78dfc2c, 0xf8c63ae5, 0xef914ce6, 0x1063c4ad,
-	0xd505d77d, 0x2ad1f120, 0xfc2c9025, 0xc72c705e, 0xb067ddf3, 0xbdcfac81,
-	0x3ee9e25f, 0x7e7c3fc9, 0x19e2bf7c, 0xfdc57df1, 0x7f868b3f, 0x832cf80d,
-	0x0d83f9f1, 0xde50b03f, 0x56df9631, 0xffd999d5, 0x13f1235d, 0x7a6b5fcb,
-	0x858767f9, 0x7f2c5bec, 0x6b95fa55, 0xf6fc2fc0, 0x0df85bff, 0xcb91af3a,
-	0x398735ac, 0x09f6b53f, 0xabf943c5, 0xf7ab9d6b, 0x7f7cf23c, 0x359eb9ef,
-	0xc6063de8, 0xa4e7bd30, 0x63bd175d, 0x96bdedfd, 0xe726bcde, 0x66b72f05,
-	0xe0dd3e73, 0x6675d8ab, 0xf67dbf49, 0xbd7fc253, 0x276258d4, 0xa4fba3ff,
-	0x9ce8a3c9, 0xc02e4caf, 0x566f8ff3, 0xee91fc81, 0x033be1a6, 0xa9e17f08,
-	0x5f94c5a2, 0xed0a7f1f, 0xb707dd13, 0x0257fd16, 0xd27b07df, 0xb667ee48,
-	0xbdfb488d, 0xfb61d783, 0x70b27dde, 0xe9e93967, 0xb445a593, 0x54e382ae,
-	0xed285e9f, 0x42c9f554, 0xbd84477b, 0xc8a64dfa, 0xff716fcf, 0x1b8a51fe,
-	0x7b35ef66, 0xdb323f28, 0x8094dfec, 0xa0be15f0, 0xb771aa78, 0x9e47ed63,
-	0xbe5175a4, 0xf38acd28, 0x8d08e9fe, 0x1851ed57, 0xb2a6eefe, 0x3f643dbc,
-	0xec87aa83, 0x7dd37762, 0x1f920ff9, 0xfe40fcd4, 0x1dfb117d, 0x66fa154b,
-	0xb6660df6, 0xec839dd7, 0xbca72ebf, 0xeb1777a8, 0xfb43ce8d, 0xc37dfc2c,
-	0x78dc051e, 0xa3ee63ce, 0x3a1e132f, 0x50b69c0f, 0x70d25010, 0x4711d2da,
-	0x25ed1b7f, 0x9cc2f30c, 0xe161ddaf, 0x7ffdcdfa, 0x2b79d0b0, 0xf384fb9f,
-	0x7e286b6f, 0x19ef3f20, 0x3a77bf95, 0x85aafcda, 0x4eb2b4f8, 0x91590181,
-	0x271e66e3, 0xcffd4afd, 0x369e84ea, 0xe4857ff8, 0x0dff8377, 0xf5215879,
-	0xe35b7dda, 0xffa1bbf3, 0x96ef041e, 0x03deb841, 0x0eb9cb75, 0xd11d81e9,
-	0xfc5257f3, 0x17cd237a, 0xa9f2befc, 0xbdd5f1e8, 0xfd601e7c, 0xbf47ab1f,
-	0x2e7ff433, 0x5f9f12e4, 0xa618af0e, 0x7d7d3ca1, 0x8830cd7a, 0x293caf93,
-	0x6ec306fd, 0xd89b0e5f, 0xebcec5ee, 0x2162bc6a, 0xfad55b7b, 0x6773f627,
-	0xf4c97d35, 0xe16a6f28, 0xc05bd97a, 0x79f08ebf, 0x49dd934b, 0x877976fe,
-	0x9af303d0, 0x42a0c1ac, 0xa25aa1e3, 0xf161f773, 0x90e049bd, 0x4816fec2,
-	0xe252b8bd, 0xe3c4a575, 0x06e38c4a, 0x8c8c7d53, 0xbc652be3, 0xd7673abe,
-	0xa9292a31, 0xdaebe394, 0x1e13268e, 0x5bd081e7, 0x6f4242f3, 0xec31f419,
-	0x40beac50, 0xd10f770b, 0x95936d77, 0x4be7d6eb, 0x0ebf35bd, 0x5fd296f5,
-	0xb40f747f, 0x7ef1fc8b, 0xddac7701, 0x9e886cad, 0xfc201aef, 0x7fd2cbd8,
-	0x4d101c2e, 0xb01ef297, 0x9e7f7e53, 0xfc827aae, 0xfb46bb56, 0x7e458eb7,
-	0xf55bf5c3, 0xeaf129e1, 0x4df68cb5, 0xfd181719, 0xc3679405, 0x0ee721f9,
-	0xffdc6447, 0x7f84039f, 0x1ab266b3, 0xc446ba20, 0xb30a0b49, 0x7349c6e2,
-	0x8637f409, 0x71b3f7dc, 0x77927191, 0xb7e228d7, 0x2cef757f, 0xaaa6baa7,
-	0xba2fa13a, 0x29bae126, 0xfb03f7e4, 0xd67555d1, 0x5533c520, 0x7dfc2fc8,
-	0xc909f11a, 0x46529363, 0xc671827c, 0x42feb4ed, 0xf3c4eaba, 0xfb446c2f,
-	0x2c2fcb8e, 0xabf992fd, 0x3738846d, 0xbc406de2, 0x3788c3b8, 0xbf0aaf2a,
-	0xa95e78d6, 0x51dc7075, 0xb5ea24d9, 0x337c8e1b, 0xede10b34, 0xd0f3fe6e,
-	0x3e4f54e5, 0x86e7d840, 0x54a7d0e2, 0x1ef5f457, 0xb5ff5c5b, 0xb52bff57,
-	0xe6950f2c, 0x6bf64c8e, 0x791fa20e, 0xb7d1ea13, 0xa538e0bf, 0xbdc248e1,
-	0x5aebcf94, 0xfce61fe1, 0xc3553a1e, 0x3783f626, 0xe4b72d41, 0x8dfa451f,
-	0x4ea29d2b, 0x3f6941e9, 0xf208ffa9, 0x773883f5, 0xf97f6146, 0x8549f437,
-	0x10d5ebe4, 0xe95532d8, 0xa42a07af, 0xdfcdacdc, 0xf6ae85b5, 0x0aa7fd63,
-	0x31184f29, 0xf58cbdb0, 0x8633fe9f, 0x4edfab5f, 0xbbb8ff64, 0xae52754d,
-	0xabfbf119, 0x6227e441, 0x271d905c, 0xe485fb5f, 0x7f794ecf, 0x65493d5c,
-	0x8b2699fc, 0x10b7f0d6, 0xdd37cc8f, 0xb2411da7, 0x5f87796f, 0x583e26cd,
-	0xdefa3bbb, 0xe7e8e889, 0xc8a0b1ba, 0x7cec8547, 0xbf8c6517, 0x31d5f874,
-	0x6fd56fc4, 0xd04a3b7f, 0x96519be7, 0x67c36bf4, 0xe2228ab4, 0xe2229366,
-	0x475afde6, 0x556bc532, 0x645f5507, 0xef41bf3d, 0x813ca597, 0xf503f226,
-	0xabe67403, 0x1fc126ea, 0xe2d166a6, 0x7e444bfe, 0xf7fbccc8, 0xbe462f1b,
-	0x067b1ef9, 0x40f21704, 0xf987b995, 0x89b4eaaf, 0x7d3aa9e1, 0xc4447339,
-	0x775a017b, 0xeabfe900, 0xc4fac075, 0xe76fa40e, 0xd891f7d3, 0x027eff9f,
-	0xb2c761fb, 0xfb8b97b7, 0x7f48152f, 0x9af6fc3d, 0x60f691d1, 0x2f7100e2,
-	0x3707840e, 0x10bf3f79, 0x6c3c4bfb, 0xbf324582, 0xaf79f820, 0x2e309b8c,
-	0x9c40737b, 0xfd7aecb8, 0x2b66eae9, 0xeab9fe50, 0x19d72b03, 0x92bcdd7d,
-	0xeab87ee3, 0x06fa4d1f, 0xa91bfefc, 0xcaf0f87d, 0xebfcf4d1, 0xe46fabc3,
-	0x29b2a97c, 0x2011cf2a, 0x5fe4dcf8, 0x5deef57d, 0x69b67fe4, 0xb6149fec,
-	0xee977d9d, 0x9835f769, 0x8ad1dbf9, 0x067613fd, 0x2aafc892, 0x11df4f9c,
-	0x98d56bed, 0x32dfd0ff, 0xfb3b2bfc, 0xd88aa757, 0x7c75c2bf, 0x4e8b6e41,
-	0xa7bad394, 0x9a688b8a, 0xd7a4e382, 0xe57f93c6, 0x0cb7f3e8, 0xf8933e78,
-	0xe0496eec, 0xd9028bbc, 0x4460cf82, 0x1aebdc14, 0x64ff675e, 0xf51aa35d,
-	0xdef188fd, 0x7b88065f, 0x3e0cef87, 0xe65e290b, 0x5da2bda3, 0x932fb8d7,
-	0x1cd6b1ce, 0xaea93e62, 0x3df18b33, 0x07ba05a2, 0x411fc09a, 0x273f0807,
-	0x65d211e8, 0x8438259e, 0xbdbdfafc, 0x2eb28af7, 0xf5ea2824, 0xf3875a6a,
-	0x5b974c77, 0xb3c7a5f7, 0x9ee92743, 0xe3be1d07, 0x8a1e2259, 0x5badff1d,
-	0x9f8e41e4, 0xf8f1fa13, 0x78e8ff4c, 0xc500327a, 0x48a05f22, 0xef8835fa,
-	0x35e763ed, 0xfe787ad3, 0xc70243dd, 0xf73b8f89, 0x63fdf026, 0x75e44ba7,
-	0x34dbea4b, 0x6d661efa, 0xec813283, 0xf79cdad2, 0xec197bf8, 0x5c9e9117,
-	0xf7c83e1b, 0x7b7515af, 0xc0e37967, 0xec2dddb1, 0x9df93cc3, 0x7cf8ec72,
-	0x3c067e39, 0xdb9e3219, 0x673ef74e, 0xf14ecdca, 0xeef89bdd, 0xd7a956f5,
-	0x6662df17, 0xe80cea3f, 0x227f7166, 0x481639ee, 0xd4ab7dbd, 0x63dfb1f7,
-	0x76fdfa1b, 0x67c2ceb9, 0x73dd3360, 0x7d9f7ec4, 0x170ff4bb, 0xefd79781,
-	0xf4bd5df7, 0xfeff6313, 0xea5b8942, 0x8a3051f5, 0xed087af4, 0xe45bd70d,
-	0x9eddb026, 0xae32305f, 0xa9df41df, 0x753bf2eb, 0x57fa0d6a, 0xf6c7bee7,
-	0xb9cb78f0, 0x86fbf997, 0x1d900973, 0xcfad9ee7, 0xe47a1a1e, 0x79774136,
-	0x14e151ef, 0xbff41a30, 0x645a1184, 0xffa0cd7e, 0xff0e9283, 0x394575c7,
-	0x63e645a0, 0x07fea90e, 0x475419dd, 0x38fec9dd, 0x21ed809e, 0x3ca86b9e,
-	0x846b50d7, 0x7034bb9d, 0xee3e5c79, 0x406a5f3b, 0x6e7493d8, 0xecad725b,
-	0x14845637, 0x22b0eefe, 0x9b7fa20c, 0x51caf9c2, 0xbf5c2d0d, 0xf154a4b1,
-	0x3c5a8578, 0x7c19f04b, 0xfc26c0b4, 0x7a5f8303, 0x88f925f1, 0xb85fc9c6,
-	0xb10bfa55, 0xda1a34fc, 0x4bfad167, 0xea878abd, 0x47c9af36, 0x4ebdc6cb,
-	0xf8b5eee1, 0x4cd2f908, 0x9f96317a, 0x1ffb735e, 0xb775fc25, 0x80525e5f,
-	0xfdcf1feb, 0x4ff1286c, 0xe8e435e5, 0xddbf4945, 0xae71c08e, 0x7597a963,
-	0x8db9f504, 0x5697841d, 0xd3b2bf60, 0x8365bed5, 0x8eb9b7f0, 0xc09c22a0,
-	0x4d15a5f5, 0xad6efe76, 0x713aa1a2, 0x26e3e90c, 0x7ec763d5, 0x52e9c379,
-	0x179423ca, 0x2a973a89, 0xabbba8bb, 0xbbba8bb2, 0xe7fee9b9, 0xeff813dc,
-	0x11d74403, 0xb57e3a58, 0x3ef87be1, 0x9335df56, 0x7fe1370f, 0x4b350f4e,
-	0xbb686cfc, 0xc4863992, 0x887fdd34, 0xfd7eeee0, 0x8a7d0b45, 0xd5e63551,
-	0xd6825459, 0xde79d6ec, 0xb52d752d, 0xe0365694, 0x429dbbb7, 0x43839aef,
-	0xbfcd6fd8, 0xea9b7abe, 0x258c6f83, 0xd2d5d5fb, 0xc112d636, 0x501b9def,
-	0x63a1c76f, 0x1ca49835, 0xca2adc6b, 0x0947e922, 0x3e6aaeb9, 0x8bf9499a,
-	0x7ce7924e, 0x1e49df6a, 0xdec56d81, 0xc923c933, 0x5a2fd99f, 0x4d4bbd63,
-	0xad03cf2a, 0x49edd463, 0x666df091, 0xc4852ef8, 0xa31d003a, 0x8e441716,
-	0xd6bffcd7, 0x3e851707, 0x07d288e8, 0x16429e06, 0x0388efe0, 0xa75cad87,
-	0xae3ff740, 0x036a3a08, 0xc26efd05, 0x76e48a60, 0x0f7bdd32, 0x834f9727,
-	0x41afa9bb, 0xfba54b58, 0xea2ab0e9, 0xbeb086fb, 0xbff7289f, 0x50b70b49,
-	0x7964f03d, 0xda053a5f, 0xe80cde79, 0x4e0bd6e1, 0x18ba0efe, 0xb24edc3c,
-	0x5a53e785, 0xe2143f2b, 0x99c27bef, 0x4d82eb9a, 0x871d6f7e, 0xd3787dde,
-	0x0f8182e0, 0x44d5ee95, 0x79ec533d, 0xfc28186e, 0x42bc9bbc, 0x414b910f,
-	0x2093c0f5, 0xd3f9f7c4, 0xebde43a1, 0x54c73fc7, 0x1ee90b8c, 0x31ba3a6f,
-	0x208f8c89, 0xe7469fcf, 0xa79de351, 0x19933e63, 0x9f049d4a, 0x7d34ce12,
-	0x73febf67, 0x28355374, 0xebefbde5, 0x5171fae9, 0xa7a83ddf, 0xa9f78de9,
-	0x7af1597e, 0x43d9beb9, 0xfc538ddf, 0x7b3ad613, 0xc03659f5, 0x722b8198,
-	0xfbe84e06, 0xc0fc046e, 0xdfb12475, 0x277c448d, 0xfe231702, 0xe751922e,
-	0x48b83bbb, 0x65913aa7, 0x7bfe36e9, 0xa1b6853b, 0x79af29e3, 0x339fcd28,
-	0x7dea8330, 0x62f246eb, 0xfb02705a, 0xecbf92b9, 0x78449de0, 0xf7c6bc50,
-	0xd37cc02b, 0x320bf7fb, 0xb227bf81, 0x3e77c55b, 0x6d1f91db, 0x3a052ca9,
-	0x23c35fd5, 0xd3f93a25, 0x0f365c5b, 0x256c477d, 0x707dedb8, 0x1d44d8d7,
-	0xd44d8d48, 0x72f51879, 0xb1ad78b1, 0x8f4e7919, 0x98f1fd8d, 0x627e90ef,
-	0x7842dff3, 0x98a9287a, 0xde530eff, 0x5cdcd32b, 0x7fbf250f, 0xf03049aa,
-	0xe7e36c50, 0xec94f57d, 0x3d52d667, 0x9359c237, 0x78ff5c01, 0x0a546934,
-	0xb4d565d5, 0x9aee7a89, 0x77eb008c, 0x7d615fb3, 0xd25ad35f, 0xb2e2f64a,
-	0xdd75c2c3, 0x07512e35, 0xd080c81f, 0x3d347af3, 0xa0f419a6, 0x8f594bfb,
-	0x5c65d064, 0x7bd0943a, 0x91dec2e3, 0xdb429384, 0xfdd037cb, 0x7470b8c2,
-	0x69d2197d, 0xf7a9d135, 0xc9cd1e3b, 0x7d061ef5, 0xd9987190, 0x06ee929d,
-	0xdfc69cbd, 0x516af023, 0xa0c08f7f, 0x4144f6e3, 0xe055332f, 0x7577e70c,
-	0x4e96375a, 0x14e11bff, 0x4bb0bac1, 0x00004bb0
-};
-
-static const u32 xsem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x93cbff00, 0x51f86065, 0xd2f9c08f, 0xbcde0c0c,
-	0xc4b462a8, 0x0c0c5c0c, 0x0e5c4041, 0x7b401ac4, 0xdbe9016f, 0xcdce1c40,
-	0xc40110c0, 0x1ff881fb, 0x6207ff10, 0x04d6200d, 0x79405fe2, 0x5b1ba845,
-	0xda181898, 0x8803b880, 0x875880bb, 0x97418191, 0x93fb7891, 0xde181984,
-	0x7af82389, 0xcd0c0c12, 0xfff3f452, 0x5631c360, 0x29efb5f4, 0x174e3ed0,
-	0x19c73f04, 0x505c2498, 0xe0bb70d5, 0x4d078337, 0xcf8d179e, 0x9e7f4787,
-	0x5cbf2a21, 0x4d3f950b, 0x23e18187, 0x2d0a9a92, 0xc7416efc, 0x0c0c468a,
-	0xabc4464a, 0xca8c60df, 0xd081300f, 0xb1adf900, 0x0003a809, 0x00000000
-};
-
-static const u32 xsem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd5547c09, 0xf37df0f5, 0x66499996,
-	0x0d909326, 0x8a027108, 0x081380a8, 0xc3b44069, 0x8e22a222, 0x260dc55b,
-	0x1037d902, 0xfdaff0fd, 0x2d361032, 0x4682d0d6, 0xa0c0748b, 0x0d0482c1,
-	0x00e02418, 0xd52ff82e, 0x5b7bbfd8, 0x16c34a0c, 0x7e1b8092, 0xce7fe5b5,
-	0xef25f7b9, 0x6d80264d, 0xfdfb5fbf, 0xe6f169bf, 0x5ddf7bbc, 0x3dcf76ce,
-	0x14fbdcf7, 0xf89628db, 0xe0cec663, 0x2cabd20f, 0xdd51b18c, 0xa0db6ce9,
-	0x74fa87a1, 0x6559ffe7, 0x4287ead3, 0x6ed0ab1e, 0x9cfdd61e, 0x7e5485b1,
-	0x386b8c40, 0xf4d31cbb, 0x8f0e1b10, 0x9616c96d, 0x6e7dd8cc, 0x0901bf46,
-	0x912974be, 0x5615ceb1, 0x780cbaf7, 0x085c7aae, 0x20c8f7df, 0xf7c25077,
-	0x1652c93c, 0xbaa23fe4, 0xbecc01d7, 0x6cb3233f, 0xe0da66c6, 0xc3fc0f6f,
-	0x7cbea07a, 0x63106cac, 0x059969ea, 0x77ea7fa0, 0x3403a512, 0x00efc336,
-	0x6c2df978, 0xfeeed0dc, 0xecfd13b9, 0xe8b78073, 0x5b7e89f9, 0x097f90c0,
-	0xecffa893, 0x5faa4afb, 0xf2f16f6f, 0x073e6c5b, 0x8d941636, 0x7f963bcf,
-	0x8be7c2e9, 0x7aa16e9b, 0xd82c5318, 0xc8b772cf, 0x635cfc4f, 0xbbfaee96,
-	0x76a214f1, 0x04d3d874, 0x3188feed, 0xb6bfb5e9, 0xd543c032, 0x0563d556,
-	0xaad84cbc, 0x700c7f86, 0x84295ae9, 0x9d9765b0, 0xfb4bc031, 0x9d870e6a,
-	0x9fcb0f9a, 0xaa1805a8, 0xff36b728, 0xdbc40afc, 0xa3ad9956, 0xf784fc66,
-	0x3bc71b56, 0x9e70e46b, 0x6ba5839d, 0xf7c74f77, 0xccad1a0b, 0x6e95f50e,
-	0x057a9fcf, 0x54fbf9c0, 0xd74a4586, 0x01fad02f, 0xea92185c, 0xcf18ee11,
-	0x36e0fda8, 0xca1eb439, 0x939ab877, 0x1ff1836f, 0xcf31b4ab, 0x676fd0c5,
-	0x80adf273, 0x96d0a287, 0xd15ef849, 0x2c8bc946, 0xfaeb6134, 0x7bc2fb37,
-	0xaf241ba5, 0x5c52f015, 0x433ccb17, 0xc0ce1f78, 0x3906d6bf, 0x9fc863fc,
-	0x1964e30b, 0x49ead748, 0x57f6c64c, 0x37671e68, 0x0e558e9e, 0x376b1e61,
-	0xda01ba5c, 0x5ecaf781, 0xc438bc94, 0x200b0b32, 0xb76fb65f, 0x81d67b4f,
-	0x0da05be3, 0x96b8e276, 0x3f2e586a, 0xeecdbb94, 0xd5adfec1, 0xd17e4126,
-	0x9e5ab5ea, 0x75c5fe81, 0xcd8f3197, 0x419aafd0, 0x88fe4629, 0x9b018f4c,
-	0xc453fb18, 0xf91eaf98, 0x37690944, 0x9fa2e419, 0x2ef44f14, 0xf54d93ae,
-	0x4b192603, 0x007eff82, 0x82be027f, 0x57849d3b, 0x05736e9d, 0x3b74e91f,
-	0x2987e425, 0xfac6d99d, 0x48e7f4f5, 0x754fe807, 0x5fd29ba5, 0xba52a654,
-	0xf443d2b2, 0x07f10279, 0x6fd172e9, 0x4e3658d7, 0x3e5d7681, 0x4b3146e6,
-	0xa71be298, 0xe7e09c02, 0x01ddf270, 0xf19673c9, 0x6a13e9eb, 0x72651720,
-	0x53e49b15, 0x05ac02fa, 0xb42f30e6, 0x9be8dcaf, 0xd7b19a38, 0x1c71e059,
-	0x502922ff, 0xac657480, 0x740fd53e, 0x1e812259, 0xc52d7c01, 0x961e0241,
-	0x067e05f4, 0x4f713d3a, 0x24b2b3f6, 0x70889ac6, 0x668f73de, 0x54353d50,
-	0x0cf50a8f, 0xc93d773a, 0xf54c73d3, 0xd02f4f24, 0xf54b59eb, 0x9eafcfd8,
-	0x318fa627, 0x917a67f7, 0x580bcf5e, 0xfcf3916e, 0x633c95c6, 0x333fb9ac,
-	0x949ea84a, 0x002cbdbb, 0x7f9d65e5, 0x864fb358, 0xf8c6c77c, 0x23328f11,
-	0x86df8d1f, 0xaa4139f5, 0x97147c8c, 0xa7926313, 0x09825f78, 0x9fb933ee,
-	0x7f927ca9, 0x653f29a0, 0x7c11a5da, 0x5eb770e9, 0x54e86026, 0xfea35e38,
-	0xd234fd6a, 0xd9fae33b, 0x9fa07e08, 0x03cef483, 0xbb170263, 0x57d8dfa1,
-	0x407ff406, 0x8eee5c0b, 0x2e3037c2, 0xea62a589, 0x991a60b1, 0x78e554bf,
-	0xfbffdf1b, 0xfde107c1, 0xe0e74b72, 0x4bff8078, 0x8e21f71a, 0x4ca88ffb,
-	0x32316e81, 0x3172c0ab, 0x6ffa4656, 0xb3f64669, 0x975e0341, 0x917e000d,
-	0xa65debba, 0x1f915206, 0x4115825b, 0x3025cfe4, 0x8c7eb041, 0xe115641d,
-	0xfef085e0, 0xc454bc80, 0xfd0355bf, 0x835f6c61, 0xfb5287f6, 0x5b7ed8ad,
-	0x075bed2f, 0xb7da98e6, 0xda9817a5, 0x3ed069b7, 0x706747c8, 0xf01f68be,
-	0x93b18637, 0x6fb53e6c, 0xf6a02f4d, 0xc0ac6a97, 0x574c7ed4, 0xbb60dffb,
-	0x49fb63df, 0x703fc651, 0xe9fc798c, 0x6bf1e645, 0x416cfc7c, 0x431fb450,
-	0x20a497e3, 0x117a7f1f, 0xd795bf1f, 0xabbed5db, 0x049aff0b, 0x5ea43aed,
-	0xac683fc6, 0x9417fc79, 0xe56fc798, 0x2c17bbed, 0xa83bed13, 0x196978fd,
-	0x2505ff1f, 0x0d66bed4, 0xb48f9178, 0x211531fe, 0x40d34f9c, 0x07485280,
-	0x921d28fa, 0x93e818c0, 0x8481b2df, 0x38620787, 0x03137ddf, 0xd6e8e6fc,
-	0x12042ca7, 0x9970f308, 0x8de2e9e0, 0x3f3e34e3, 0x9f5e6907, 0xab3aba2d,
-	0x8cf9a651, 0x2e86b4ad, 0x37b6fe82, 0x678441ca, 0x2432bcad, 0x760a7cd3,
-	0xb0a7be02, 0xf3ff3e30, 0x8ceb61aa, 0x674c8ae3, 0x2dadab57, 0xd2eab906,
-	0x90d9e3ef, 0x055fe80a, 0x6ea8c132, 0x34f415b8, 0x39fc3d03, 0x0f4c63e8,
-	0x392edcab, 0x5d9c7a04, 0x059b946c, 0xb2092edc, 0xff4087f7, 0xdffa227f,
-	0xb77c70aa, 0x884293ce, 0xcc566fff, 0xcd9f50d1, 0xa4058eae, 0x5ca3f777,
-	0xbb73a9d0, 0x14f64435, 0x9f88074c, 0x191449db, 0x1baed3fb, 0x305c94de,
-	0x31f4d63f, 0x0b3777bd, 0xf2854e2d, 0x0ee79733, 0xeff8c370, 0x211d669a,
-	0x7cc4fce3, 0xc7242dfd, 0x8725bfac, 0x2b0d69b1, 0xdc00fed4, 0xbcfd4d3e,
-	0x1dfef0c5, 0x577c3301, 0x576e1981, 0xed05aa43, 0xad894299, 0xa9ef7a85,
-	0xedebe730, 0x3812964c, 0x3f7b455d, 0x85f41c01, 0x3a60f747, 0x89bb1f02,
-	0xfcddd3ae, 0xe53fbd5d, 0x4c2ca90f, 0x124b71f3, 0x5127fa23, 0x8f9b80b9,
-	0xd3bfb23b, 0x0fcf9b55, 0xa0fe99fd, 0xec8cf84c, 0x58aecb7f, 0xd9ec059f,
-	0x552f9a96, 0xf1c8c164, 0xc67ff644, 0xb8f1c8fc, 0x721f9c35, 0x39cf9183,
-	0x53f2449f, 0x5fb8e379, 0x53f0321e, 0xbfb5fd69, 0xaf78643c, 0x1326eeb8,
-	0xc3ba185c, 0x26bf3e54, 0xbb3f94d7, 0x3f94d0ba, 0x131cd973, 0xd07c1b9c,
-	0xfcc67e54, 0x7bfca605, 0xe5311e2a, 0xc2b055df, 0x7811df04, 0xf6fe54ca,
-	0xf94d6b69, 0xdc975d96, 0xf5547288, 0xde70cc81, 0xfad1daf8, 0xbf37b473,
-	0xa45e2876, 0x57b011c7, 0x818e0e50, 0x7b6982bd, 0xabb248e3, 0x31e60f41,
-	0x4b56a130, 0xc6cb83fb, 0xa4665ea2, 0xefd2433f, 0xc634c183, 0x843c979e,
-	0x6346b93f, 0x89616061, 0x71f17425, 0x6fc86ca7, 0x0d7e4739, 0x9ec8fa08,
-	0xf44b72f9, 0x72ebe5e7, 0xd3bd402f, 0x5f803e9b, 0x3ae79c7f, 0x99103d84,
-	0xbf31225f, 0x7ebeb9f1, 0x7ae25cba, 0x53ac44be, 0x3bea5e4a, 0x0e10b99e,
-	0x5b38ae0f, 0x5480f57b, 0xfd6893d4, 0x803f2127, 0x51e81814, 0x24c8375c,
-	0x65bb6ddf, 0xea1957ea, 0x99abd004, 0x4257bfcc, 0x9bde133d, 0xec30cb7e,
-	0xd475ef87, 0x8931acfb, 0xcab6f5e6, 0xa43cbfc9, 0x94fc7d22, 0x469ca91e,
-	0x80656b69, 0x059543d2, 0x595e7e94, 0xe54b6941, 0x540f4a7c, 0x63fd2906,
-	0x3f4a32e5, 0xf4a6acad, 0x4a1acae3, 0x510cac3f, 0xa3e95eda, 0x2e879754,
-	0xf617ebfd, 0xc0b758b0, 0x8b0f6e03, 0xb2822cb1, 0xdee724cd, 0x53f39454,
-	0xa3066f8e, 0x63ea7fbd, 0xde8ca260, 0x6fc915f1, 0x47d1d3bd, 0x085e4af6,
-	0xcf4fa798, 0xa70c7b7c, 0x26c2dd93, 0x8f47d033, 0xf79cf45c, 0x2b04a1de,
-	0xa9c032c8, 0x519c9bde, 0x0fb985ea, 0x3a2e75e9, 0x70e75f31, 0x3eb7675c,
-	0xac6c97fd, 0x206972f7, 0xcaf7879f, 0xf0b30f34, 0xd7a45eb3, 0xf49bc50f,
-	0x5bd29fda, 0x2e89dca0, 0x33a735fc, 0x6e48e748, 0x8354ffaa, 0xc7882995,
-	0x2e10d8a6, 0x7bed4f8d, 0x38f285d6, 0x3eae5537, 0x7c77b234, 0x5467d695,
-	0x29e30c3b, 0xa7c3346f, 0xdcc9a5aa, 0xbb89e07f, 0x95f21875, 0x45d0fabb,
-	0x4a54ff48, 0xa6e67af5, 0xb1ced46a, 0x7c7141ba, 0x79f10efe, 0xf13c6370,
-	0xa93bac2b, 0x3fbb3ffc, 0xf7a3d5bd, 0xf606b187, 0x01f50d85, 0xf73a0de4,
-	0xdd07a8fa, 0x3f34af95, 0xfd49abd2, 0x1885ed06, 0x206677f8, 0xac10abd6,
-	0x2f5e5bd7, 0xe397ad07, 0xf6a68df3, 0xbe8f3de0, 0x7af7c7a6, 0xb5855be7,
-	0x7d04e3ea, 0xe7f0a575, 0xabd9d714, 0xbc4af3cd, 0xec6f2e09, 0x679a6d5b,
-	0x7f900ff0, 0xc8292156, 0x9b82253f, 0x32c7143a, 0x6a97fa09, 0xe5bd50f1,
-	0x6a572f12, 0x1e02d16b, 0xb466c762, 0xd1cdee33, 0xfb73cff9, 0x1fdf401f,
-	0x1ecaadfd, 0xd7e17cc5, 0xb06cf551, 0xe7e82d6f, 0x0dbdd011, 0xef5053c5,
-	0x3d76dd1d, 0x98b327d9, 0xa48b85df, 0x8d9d5602, 0x6609ce76, 0x7ffc8c99,
-	0x35defd82, 0xc8deb0d2, 0x9fd468b7, 0xf3cccb99, 0x2667d82c, 0x0cc6bf38,
-	0x939bb1e7, 0x56f3df91, 0xa0b730aa, 0x6ff39a5c, 0xbe49b8b7, 0x12c559f2,
-	0x3f08ef5a, 0xa66ebdd8, 0x2fb907f4, 0xec99e57d, 0x87e8a1dc, 0xf75bfae0,
-	0x7026140f, 0x3128a53b, 0xff20f9a4, 0x3f91868b, 0xfbe182b9, 0xa7a825a1,
-	0x5de64e82, 0xefd27acf, 0xb23ff687, 0xd27cfabf, 0xfa214fc3, 0xbe49d721,
-	0xda759450, 0xd84916c3, 0x974a415b, 0x76eb718b, 0x5c044d6b, 0x47d7011b,
-	0xbf377fc0, 0xbf133225, 0x35025aa5, 0x5fce2496, 0x4a482f68, 0x47f816a7,
-	0x51ed4fea, 0xb53fed7f, 0x3fa834fe, 0xfd7f54db, 0x0bfeb53f, 0x29bff47b,
-	0xafa5fd5a, 0x0416da6c, 0x79b4537d, 0x3cc18b95, 0x4ea95474, 0x4bdd02f6,
-	0x21762fd6, 0x82511c1f, 0xa3e7e42e, 0x34727921, 0x22d2f87e, 0xe7cca2fc,
-	0x855d7090, 0xc7fd427f, 0x54d9f85e, 0x59bee7b4, 0xbd69baaf, 0x5b0d6754,
-	0x1acb4e41, 0xdfa0a70a, 0x1c83e017, 0x46527a5e, 0x9fccd1b8, 0x4aafcf45,
-	0x701eff46, 0x844f588a, 0xab2a5ec9, 0x9c24f3fd, 0x2759ca87, 0x7be459c9,
-	0x04e9fed8, 0x5ab98fd2, 0xe87ccf5c, 0xe5f9d927, 0x0de52f02, 0xbb293b3f,
-	0x30f6bd30, 0x4cb013ea, 0x7c8f0ec8, 0x41d840af, 0xc4ce2c87, 0xb1425856,
-	0xa11fb11f, 0xc2f1d4de, 0xaa0edc42, 0xf0e4f0da, 0xb6afd083, 0x24badfda,
-	0x7974be03, 0xf33f553b, 0x7a7aafd7, 0x62edcbd7, 0x5efdd7bd, 0x34f3de88,
-	0x89adfb0a, 0xd86a25a7, 0xc971f685, 0x841bd55a, 0x9e9b25c7, 0x5c69ee7d,
-	0xf5627eaf, 0x17f5045e, 0xc3e37a6f, 0x6f170031, 0xf0a71351, 0xe4a43861,
-	0xc394fa6e, 0xba23f9bf, 0xf2f451e9, 0x18679a1b, 0x4270fe7f, 0xb78a5d37,
-	0xb0d8d6ec, 0x5098f89e, 0x716b5bbf, 0xfd4fa144, 0x676849c1, 0x56f86d55,
-	0xd1e575c3, 0xc94b125d, 0xb5cf8288, 0x80bd906f, 0x0a7a2278, 0x2fd1757a,
-	0xd0397ca2, 0x247af505, 0xbdcb22bd, 0x1465fa81, 0x93fd17af, 0xbe2fdfc0,
-	0x4fec7e8a, 0x43c45ead, 0xb9f78bc1, 0x95873c70, 0xcfe7ce0a, 0x3f464e2c,
-	0x4c1a817d, 0x9fca5376, 0x9fb9ac17, 0xbdff2ff8, 0xfaf993fb, 0x42d7d7d0,
-	0x2fb05573, 0xeaf6738e, 0x799c68db, 0x587c402c, 0x0fec8cf0, 0xc2b5fa41,
-	0x22896f26, 0x9732c527, 0x80ebc393, 0xc3ce30b8, 0xbf414eb8, 0xd0e5efee,
-	0xcc8ff27a, 0xee0fa861, 0x6cf1fdd7, 0x8b5fc12e, 0xb27184fd, 0xdae75f45,
-	0xbb5bfc4c, 0x74e919b4, 0x052f806c, 0x4ce56afd, 0x487c0a09, 0xf95ea067,
-	0x3853abbd, 0xc947989d, 0x5d81ef16, 0x639f0130, 0x67d566f9, 0x8f7a6e1f,
-	0x6ee8c99d, 0x1f689e7f, 0xf3831dfa, 0x5664e1f9, 0x7c651f50, 0x07aeb235,
-	0xf0375e60, 0xb9de4199, 0xc23ed7fc, 0xff975de5, 0x31934dd0, 0xb9f7abff,
-	0x387be11c, 0xc2bf425f, 0xfbbf9429, 0x83f48956, 0xc9a38595, 0xe42aad79,
-	0xc91f9cdc, 0x457fd02f, 0x0df0338a, 0x744093b6, 0xde5abf20, 0xa8df784a,
-	0x575db157, 0x39757acf, 0x20fa17ce, 0x707d064f, 0x603eb759, 0xe81eb9ab,
-	0xf20aeedd, 0x7a1a9bf5, 0x5f9469ee, 0x07a0d790, 0xe3f557e5, 0xdc6f8ff8,
-	0x209de1fb, 0x75ebc7b7, 0xd5eb35b9, 0x782db948, 0x7c84bd69, 0xc7b7291a,
-	0x894ac00b, 0x3cf0b726, 0xb416dcaa, 0xaaf44bfc, 0x65c7c78e, 0xf5d55eb3,
-	0x8cf86f64, 0xca9793d4, 0x127aa89e, 0xecb3ef7e, 0xf3a8fc9e, 0x457fcea1,
-	0x80bd29bf, 0x9f3a09fc, 0xc5d87cea, 0xf61f3aa7, 0xf098cff0, 0x3b7f9918,
-	0xc10c04f2, 0x7f255dbf, 0xdf134962, 0xdef7838f, 0xf8459fec, 0xc734d1f2,
-	0x9fecdfaa, 0x11438468, 0x79447d70, 0x8fec045f, 0x80881f28, 0x4be54c2b,
-	0x8c6af71a, 0x2a6c20f8, 0x2bff9d67, 0x759445f6, 0x950f3eac, 0x82d49c37,
-	0x9d691fc8, 0x753fea1a, 0xe8a89821, 0x9329dc3f, 0x7003b0ff, 0xe9da04bc,
-	0x0a1198d8, 0x6c591e82, 0x0ecdebe7, 0x012ba777, 0x1cf1c5d2, 0x96d24cee,
-	0x9fd41ea0, 0x1fb9da77, 0xe9dfc3a4, 0x31f8378a, 0xa4c9360e, 0x6c425bc7,
-	0x093f3472, 0xdf8434cc, 0x3e5bd616, 0xe0768ff7, 0x87b633be, 0xcf40cefb,
-	0xfa4765ab, 0x56bf5c7c, 0x23605ecb, 0xedc16b36, 0x77a1742e, 0x71ba0d34,
-	0xfd9f3c1a, 0x6db7ccb6, 0xafa53e82, 0x8471dd61, 0x2b189f05, 0x72de7ee1,
-	0x4d999fe2, 0x6b321d7c, 0x28797479, 0x39e5ef12, 0x77a869e6, 0xb9f0fd61,
-	0xd7ac0fd1, 0xe23ab053, 0x42f5d379, 0x3d69aa6e, 0xce6b5458, 0xd4f5880f,
-	0xc9feba37, 0x7fa49964, 0xeb84a170, 0xafb7a17a, 0x38de8796, 0xb1d3e80d,
-	0xbfb8664f, 0x2649aa7a, 0xc8da9cfa, 0x305953f7, 0x8cafe489, 0xd4be9275,
-	0xf286d6f1, 0x7aef7175, 0x9feb6dac, 0x3e421fb2, 0xe187f6da, 0x6db482bf,
-	0x778327db, 0x47cafc20, 0x3d607fe9, 0x65d84fcb, 0xc7733f27, 0x7ff1272e,
-	0xa5dfcec7, 0x76f0843f, 0x3af7f92b, 0x1c3b7d76, 0xa163b1f9, 0x60f500b5,
-	0x7ebe00c7, 0xedf9daaa, 0x7f9a16f0, 0x331d1117, 0x7de88d14, 0x072fe9aa,
-	0x54e02e30, 0xed0a8c13, 0x24b15d8b, 0xdaafe55f, 0xb1d11fc9, 0x80ecdbf3,
-	0x9e379fe3, 0xd3ffb132, 0x5ed364e1, 0x73c5fec2, 0x8ef979bf, 0xc02ecfd1,
-	0xdd86f1fd, 0x9fc84cda, 0x875fdaf0, 0x78ed7ea3, 0xed4ddb89, 0xdc1acb6a,
-	0x48ba18df, 0xbd02a85e, 0xfac851da, 0xd16fb631, 0x4728f1c4, 0x57f2f13d,
-	0x2f9cb3f2, 0x7c28263e, 0x8feffb3d, 0xf5c7c90f, 0x9364339f, 0x1ddfdc70,
-	0x89ea03f8, 0x4be2565d, 0xebc7bc7d, 0x733d9017, 0xfbdf71ae, 0x52dc6e3f,
-	0xbdc67cf8, 0xff9cdfe0, 0xfa878aad, 0x3d072917, 0x03e77cf9, 0x7a726f04,
-	0xc9e7bfa9, 0xa7ff6bef, 0xa025fdd1, 0xe3dcebbb, 0x4b3fff0e, 0x0ba7b7f7,
-	0x3e31bbba, 0xbfb5fca0, 0xa87eff52, 0x37f96b9e, 0xe36f7ba7, 0xb7fdedd7,
-	0x33f79e2c, 0x5664fca1, 0xe2c340ed, 0x6f3dd2da, 0x5bee4267, 0xb1e37b69,
-	0xf623e3bf, 0x5e34f47b, 0xf1b6fee5, 0xed03efb8, 0xac4978b2, 0xab3af917,
-	0xfa2fb0bf, 0x3b23cbcf, 0x63da7fa4, 0xc5304f64, 0x2bf712b3, 0xe99f4adf,
-	0x360bd8a5, 0xc200e3e2, 0x6c052bee, 0x4afe6f5e, 0x4adc3e62, 0xfd7e9fed,
-	0xd373b43e, 0x83b264d2, 0xf7fb2521, 0xfe64d775, 0xad3344bc, 0x98f5ae87,
-	0x129347d7, 0x89a8ebcd, 0x19abbea2, 0x0ed5ffef, 0x3c021429, 0xcbf01f8c,
-	0x8ea7f444, 0x126548bf, 0x605893c0, 0x263bae11, 0x9df5cc3a, 0x836c7dc0,
-	0xc5eff1bf, 0x3c2ec4e3, 0x47e95c0e, 0xc9900e3c, 0x3c4e7aaf, 0x6f09bf62,
-	0xc78c2199, 0xe3978a61, 0x4bd4a131, 0x1eb16a7e, 0x1da26ec7, 0x349638a3,
-	0xb82b3ca3, 0xa078e69e, 0x9ebeb875, 0x4cdf0dee, 0xd115cfac, 0x257f8ea4,
-	0xcdd9f64d, 0x5cfad1f5, 0xa50fcba7, 0x7fc74e87, 0xaac92e94, 0x8e692e99,
-	0xebca0a39, 0x8c3f5c64, 0x1c99f2c4, 0xb42a0b4e, 0x0fd624df, 0x28e678d7,
-	0xa4278041, 0xaf482a65, 0x22f6db7c, 0x79b51f8c, 0xc5c7ea25, 0x1f9a166d,
-	0xe112596c, 0x428d487d, 0xf7167bf0, 0xd4f7a428, 0xfe395e2b, 0xbb3f4320,
-	0xba06e34f, 0x7c97ef9f, 0xd8cce67f, 0xf0c7f46c, 0xde7fc61f, 0x59b7eb00,
-	0x063859ab, 0x615b34f0, 0xf404b8c1, 0x73ec4b93, 0x0cdc9f93, 0xe4aaefe3,
-	0x55ce7aee, 0xf2bd37be, 0x015f4ecf, 0x45f9f63d, 0x94c76d8c, 0xc6288a6f,
-	0x9a8ff6f5, 0xf7cabe38, 0x1e40d0b3, 0x0dfb2187, 0xab2f8afb, 0xcaf33fdc,
-	0x891a5f1f, 0x1d71dceb, 0x7eb8e343, 0xa971e2cd, 0x8a70bd62, 0x0ebce279,
-	0xe283afd4, 0x9f74bf68, 0xe7168cec, 0xbfac41b8, 0x28f1837f, 0xb2d47690,
-	0x57d7196a, 0xbefc93ac, 0x5b1b5ac1, 0x661e251f, 0x7e116a8d, 0xf8374122,
-	0x7fb8d9c9, 0x0d9fdbc3, 0xe919c6af, 0xa8e536d6, 0x1d27bc32, 0x61b9f7f0,
-	0xc51feaff, 0x11f7ae2f, 0x2dec1bbf, 0xf451fc93, 0xdfc0bd47, 0x91df3dd4,
-	0xa6d2f49f, 0xdfe416b5, 0xa62d6b4b, 0x553ad8fd, 0xb04631f8, 0xa9afd811,
-	0x2cceec7b, 0xd93ecba4, 0xe5a5f18b, 0x40b5274d, 0x48c47d94, 0xe8fd627c,
-	0xdd556f7f, 0xb50eeed4, 0x75e2267e, 0xc31b09c7, 0xad76f575, 0x3f5a38ba,
-	0x7ef2b4ef, 0xf7f566ce, 0xf7f8cf0d, 0x0eb8efc3, 0xae3c7847, 0xf0996b3f,
-	0x1ff24483, 0x553e3e23, 0xbf3842c7, 0xf5157ae2, 0x8c8da9c2, 0xc94077e6,
-	0x06feb863, 0xd1b1ff79, 0xe37173af, 0x5da0df96, 0xb924d650, 0x4ca24b71,
-	0x8fd0d169, 0x2f18de5b, 0xe99c3ce3, 0xdd6fe3d1, 0xc8356ec3, 0x10aaab45,
-	0xd98ef6be, 0xfbb61771, 0xd0c69b65, 0xdebdf14e, 0xfc79c2e9, 0x2491a6cb,
-	0xeb8dbd07, 0x34564ae5, 0x841ce311, 0x87e48c3e, 0x4c631ba1, 0xa07215f0,
-	0x54d7ca1f, 0x6f3ccb6b, 0xd32dfa14, 0x788fb124, 0xf42dfa9e, 0x7b7e99ff,
-	0x016fd75f, 0x23906fd9, 0x419bc0bf, 0xd344a5bf, 0x4f25736f, 0xee7de20a,
-	0x482941ce, 0xab6fb9d7, 0xdbf4d149, 0x2fbe4aa6, 0x4dc459ba, 0x7e803477,
-	0xdfa0dcbb, 0x45bf401a, 0xa3191f89, 0x73fa7ee9, 0xbfd0b7e8, 0xa136fe46,
-	0xde328b7e, 0x74fe041b, 0xe9bc36fd, 0xe1b7e920, 0x3c53160d, 0xf84d44f0,
-	0x6fd57a9b, 0x68add252, 0xbd53ef1f, 0x67f851b1, 0x37c7b093, 0x6c46388b,
-	0x955cf507, 0x5cf4c3f6, 0xb9eaf9de, 0x759e117f, 0x2b77373d, 0x9ee8b8a3,
-	0xdcf5c87c, 0xe7a0eddc, 0xae47e424, 0x64eee6e7, 0xa1172fdc, 0xd0f486df,
-	0x97ca8c6f, 0xe5fbf985, 0xde4f198d, 0xf08df50d, 0x941b5ea9, 0xefadd11f,
-	0x5df51946, 0xbe8bd695, 0xfa7e77db, 0x77d0ab6e, 0xa206c7a0, 0x0fe48d7e,
-	0xde39936f, 0xc3e8c77c, 0x79465f1b, 0xfb4c9df9, 0xf859ef92, 0xa33bd1fe,
-	0x7f21670f, 0xf3fa2a7d, 0xd9e9c6a2, 0xfaa4195e, 0xc7cebc27, 0xfb91ba57,
-	0xb81acbcb, 0x2b56587d, 0xe7f03c87, 0x69df31a4, 0x9dc2ffd8, 0xf8014b12,
-	0x13f56b26, 0x9febb40e, 0x1f589957, 0xf034c94d, 0x629cacc3, 0xd957fbf2,
-	0xfcf0eb5d, 0xd9852cd1, 0xec5fbfd0, 0xed147498, 0xbe1ce2e0, 0x9e2c501f,
-	0xb3b071eb, 0x4464f4bb, 0x9ce3483c, 0x9eb3fb37, 0xad531671, 0x9f53ae9c,
-	0xb7184295, 0x22ee33da, 0xb8a17a44, 0x5dfcfcce, 0xc9377f21, 0xf62f842d,
-	0xee351cae, 0x85d72f43, 0x4f027da7, 0x9e131780, 0x3c545242, 0x64a7a501,
-	0xa5e37726, 0x4b2d77f0, 0xf0a05f70, 0x91f68929, 0xe3adc723, 0x3afc722d,
-	0x773f751e, 0xbf2fa8b1, 0x6b9d2d69, 0x8e8bc48a, 0x747c48e7, 0x1f023de1,
-	0x7e5d69ef, 0xd71891ed, 0x7a437c04, 0x809ff826, 0x3fc76817, 0xf9d322ee,
-	0x5e048f9b, 0x9b8f5646, 0x370fe180, 0xe43a1c61, 0x79ccd5e7, 0x63e02fb3,
-	0x119ec7d4, 0x315e9d38, 0x7dc01ac6, 0x4ef60dda, 0x1f3a83d2, 0x3e72b30e,
-	0xd95e84d4, 0x3c62afd1, 0x251bf3ad, 0xe521da37, 0xb5e13b61, 0x0ed1f81c,
-	0xf53ef645, 0x578124cd, 0x6aaf9d37, 0xd013f314, 0x26eb82c1, 0xf10abe7d,
-	0x9b2358f3, 0xebca5d38, 0x58b25d38, 0x94c7ed27, 0x30de48d5, 0x71aca78c,
-	0xeba1c50e, 0x0e7e19fa, 0xf0a29d23, 0x7f8d12af, 0xb39b3a19, 0x62cde7bb,
-	0xb5aa6e51, 0xe7dc43fa, 0xb1f20a99, 0xfe10d896, 0x3efe1677, 0x2450fc57,
-	0x78132ebd, 0x757884db, 0xb93afe20, 0x8efe15fd, 0xf9e969ce, 0x84d04ae5,
-	0x9f4f09d7, 0x53b7fce6, 0xac5fa0f2, 0xcfc86f0b, 0xc74a3f90, 0xd233f21b,
-	0x465729a1, 0xddf00f38, 0x78e7a327, 0x28d4bf71, 0x0f3b85f7, 0x919ffaf2,
-	0xb8ca2cbc, 0xff7f307f, 0x4deebe40, 0xc55987de, 0xf7f0413a, 0xfdcef63b,
-	0x77bf9123, 0xd12fdc4a, 0xf7da6f14, 0xd7cac1bc, 0x20ec1b4d, 0xf6dfb807,
-	0xe75deab6, 0xae1fa9e9, 0xc03972b2, 0xe0c784f5, 0x0704baf7, 0x75a6f182,
-	0xa4178a36, 0xf6e40c7e, 0x6f5f51aa, 0x5ba4b3b2, 0x7faf7ab3, 0x37bfa88a,
-	0x8787497b, 0x47a87b61, 0x21bda11b, 0xce45eddd, 0xe0ffba17, 0x43bae35c,
-	0x3bdfcff0, 0x1f9dbd2e, 0xce554f1a, 0x4c5f699a, 0xb54aab8f, 0xd1515e04,
-	0x992c9bbe, 0xe7a0b7e2, 0x70ffce82, 0xa36ab7fd, 0xa59faf7a, 0xd08ec8da,
-	0x2d5ecbcf, 0xf010583b, 0x254fa5f6, 0xe32b0179, 0x7f38b183, 0x1079878c,
-	0x8ff72f92, 0xca6ee8fa, 0xed9f6997, 0x29f5dfc6, 0x1bc87dc5, 0xbb1d0c79,
-	0xfb225331, 0x6cac3de1, 0x36e1da34, 0x268ab3e6, 0x47e73f21, 0xd73c21f1,
-	0x3d5b5992, 0x3d7203c1, 0x85542ea2, 0x674277a9, 0xaf483be2, 0x7a433271,
-	0x4cfafb35, 0xbef7f9c0, 0xdc4cb33f, 0x813b078a, 0x8fb119ea, 0x31b96125,
-	0xce5a24be, 0xeaf86e8c, 0x7fa05bfd, 0x5ecbf7a3, 0x69bb940f, 0x7281c3af,
-	0x85b56436, 0x19780c05, 0xe85542c3, 0xc87d1a77, 0x83ea0b77, 0xf07bb002,
-	0xd341497c, 0xc2172ada, 0xbf7a25ab, 0xe498183c, 0xaa6dfe82, 0x32e93939,
-	0x0e500bd4, 0xcd5f29ab, 0x4ad795cb, 0xce710c5e, 0xf1415a6b, 0x12b57948,
-	0x14dc601d, 0xd78d9892, 0xbd41b21b, 0xfbc3569b, 0xc17f3859, 0xed6f58fb,
-	0x416ff7c9, 0xa4fd03bd, 0xfdf237f7, 0xcf783cfa, 0x3b527283, 0x5c2bea87,
-	0x073c312d, 0xcf91b053, 0x55fb054f, 0xec37e62f, 0xdde68a7e, 0xdf5ed029,
-	0xc28f9c0c, 0xd13ce913, 0xe74dc948, 0x80be1f38, 0x0e0756f4, 0xa5f05f18,
-	0x4909f8f3, 0xa3fd62c0, 0x6dfd7fdb, 0x9e535cfc, 0x07d68177, 0x272779ea,
-	0xfc42c329, 0xe1f69274, 0x03be010f, 0x79379c56, 0x9cdecb3c, 0xc316b42f,
-	0x1b6398fc, 0x6acfef44, 0x1e71471c, 0xe29f99b3, 0xe68ea63c, 0x57bbe776,
-	0xefe843da, 0x4ced577b, 0xaf7be7c3, 0xf6f3d2b4, 0xb70f5c4d, 0xbf21680f,
-	0x2ad5e1fb, 0x552ff3c3, 0x13d265ab, 0x74aa3787, 0x867e576e, 0x6fe437c7,
-	0xdec876e2, 0xc3debcd5, 0x9b7edc75, 0x936dccf0, 0x5fce1e70, 0xeaf9cfcf,
-	0x875f5a7a, 0x4d0bb9e6, 0x9ea45bf3, 0xa970f5d5, 0xf54147c0, 0x8f4fda5a,
-	0xfaa5bbd4, 0x6fa1187c, 0x9d9f714b, 0x24c3d3f6, 0x91f5a547, 0x6e8e65f1,
-	0x43f20dbf, 0xefe23bf8, 0xc32afdb2, 0x45f48d75, 0x678a24db, 0xf21ef9c3,
-	0x3e493747, 0xf8287b8c, 0x7b221ad8, 0xe33b943c, 0xf99e703f, 0xc8f0cac4,
-	0x03d22b48, 0xb58e54f4, 0x84bf8ff3, 0xb3df47e7, 0xf010e461, 0x5fe12e4f,
-	0x5ace138f, 0xb27ee3cf, 0x8c995bde, 0xc4d98de7, 0xf207a43e, 0x3016646b,
-	0x92a38de8, 0xf93b96ef, 0xfb46e0fc, 0x966ba747, 0xf3879d56, 0xeb8d916c,
-	0x957acf47, 0x0bc78bce, 0x3e0bd618, 0xb70a77b4, 0x0cd648af, 0x73b850fc,
-	0x0ea83245, 0xcbc444b6, 0xe6738954, 0xa76f1a85, 0x5ee49770, 0xaf47686b,
-	0xdb57af47, 0xb41bdfce, 0xd5bda793, 0xa3fd885f, 0xa1ad7e71, 0xa7ac88de,
-	0xd4bdfb47, 0xa75ff393, 0xffb9e257, 0x0a65779c, 0x62f9cf76, 0x3ee320ca,
-	0x7eea9e8f, 0x2df7ece6, 0x5fc067cc, 0x98631fce, 0x86ef40cf, 0x40ff2051,
-	0xb91a1bbf, 0xea30d73d, 0x459a56a0, 0xbde51bb0, 0xcba3f84c, 0xbbfdf226,
-	0x16f7cc86, 0xc94ffca1, 0x581f8892, 0x49f5a030, 0x83cdfb24, 0x59f900fb,
-	0x787cfdfc, 0xe1b2e51f, 0xa0a72e29, 0x4fa83c2f, 0x98af56ca, 0x256be544,
-	0xb0dfd60f, 0x92ec9736, 0x51991c82, 0xb241ed7e, 0x0f1a0a93, 0x833ca226,
-	0x7b44aefc, 0xd5ac6ca0, 0x9758ea8d, 0xdfce5d4b, 0x9961e715, 0xcf0c3dcd,
-	0x5876e077, 0xf796f934, 0x72b76133, 0xe1cf2cb9, 0x26eefb72, 0x3e784715,
-	0xad724e72, 0x728cb1cb, 0xc72dd59c, 0xd04f577b, 0x870fae50, 0x99a38a24,
-	0xe5007a80, 0xe71e837c, 0xf3d8edc4, 0xd973f395, 0xbf20a599, 0x72ea5f38,
-	0xa475cbae, 0x2d2b373c, 0xee3f62b7, 0xe34ed2bb, 0xf6d57098, 0xfae3ef0f,
-	0x275ff68a, 0x3260f55c, 0x853cc7ea, 0x78e979c7, 0x5c78552d, 0xad7e8f60,
-	0x3df5a05c, 0xf445fe9f, 0xd9ab33e3, 0x8b6f125f, 0xb5eff1e7, 0xb9fdf12a,
-	0x9c87b3e4, 0x9e7ca79d, 0x4b9d5caf, 0xe5f6f53e, 0xe27ae69d, 0xf5476991,
-	0xf01dafac, 0xbe3c0618, 0x8a59f1b5, 0xc2f13e0f, 0x8748a9c1, 0xe7c01de2,
-	0x9d1b5fc8, 0x4e7a8c2c, 0x55bcd109, 0x39d320d4, 0xb384a603, 0xe51a716f,
-	0x1575c798, 0x3f12766f, 0x0d64bd15, 0x8bf7814d, 0x9c317db6, 0x76166ae2,
-	0xf05adc52, 0x072f6105, 0x1ca3865b, 0xbe3c2914, 0xfc2f522c, 0xe7edc6da,
-	0xd3b1edb6, 0x1d527c70, 0xa8a2dfbf, 0x6ad576fe, 0xc278a7d8, 0x50bb52a6,
-	0x8379f68e, 0xfe78c7c0, 0xbc67fb17, 0x2b8f4157, 0xf5c0db6b, 0x1aa35144,
-	0x8a327bc2, 0x63b4b6ea, 0xc7d171bc, 0x957ff256, 0xf3a49dd7, 0x6f361314,
-	0x794aff22, 0x8fda6ca3, 0x59df11eb, 0x18ad8727, 0x4a50d897, 0x1f0090fb,
-	0xc45eb824, 0xf8c0fe53, 0x3bcde2c3, 0x850105b7, 0xef3f2fc5, 0xac72fd42,
-	0xf10bbd79, 0x359ef50e, 0x3c47bade, 0x2223fd67, 0xc386f39e, 0x2f4b6f74,
-	0xf0c79cf1, 0xb794100f, 0x4e78e66d, 0xec87d756, 0xb667e84b, 0x47feca3f,
-	0xe9be7d97, 0x1e7835eb, 0xe3a5eda1, 0x25dfb06b, 0x0d72fb7f, 0x5db189c6,
-	0xcaf79a76, 0xe280f85f, 0xbef7f5b7, 0xc87f09b0, 0xfe29e786, 0xab13fdbd,
-	0xdf6b6b17, 0xe31d3879, 0x7cb7db06, 0xccfe8c97, 0x26af3b79, 0xadbcef7f,
-	0x94585213, 0x914f4379, 0x11e7437f, 0xb7491f7f, 0x297b0dbd, 0xd004ed9e,
-	0x5760f51d, 0x297d6e9c, 0x88f67f8f, 0xd18ddcf8, 0x88f43bcf, 0xe5b86dc7,
-	0xff512bc6, 0xf27b7037, 0xefb9719c, 0x3f2f3d03, 0x146e3a0f, 0x37f5d7f1,
-	0xf72e359c, 0xf401fe04, 0x74cdd8b2, 0xf661bafc, 0xbcc69faf, 0xc6bd3e86,
-	0x03cf86e5, 0x8a79fa7f, 0xa73e6c77, 0xa5e8e51d, 0x343c50df, 0x078a6fd2,
-	0xd3afa3e7, 0x11ca3cf1, 0xce3a73b5, 0xad3b9d3f, 0xd14fdf74, 0x9e488fce,
-	0x47beb7da, 0xce266a7e, 0xaeb3b435, 0x973f8f1f, 0x9d6b78c4, 0xd0579e3c,
-	0x3d7de301, 0xe22e7a2e, 0xeb5f397a, 0xc5bdbef1, 0x1f6d5ef9, 0xe00fee28,
-	0xb5a5c8f1, 0xb3f1107f, 0x729374dd, 0xcf075e90, 0xe3ad471a, 0x72f42dc1,
-	0xf47b1c77, 0x38aeeab8, 0x21ba08f6, 0xea9e713d, 0x3807538a, 0x49f9046d,
-	0x2e768a3e, 0x8f2d7da2, 0xa3576f7f, 0xe3d6379f, 0xf4117dda, 0x9bdbc7d6,
-	0x7b72e8bc, 0x50fc71ae, 0x4266d13c, 0xb57c4f52, 0xbf5d1f7d, 0x7f4bb4cf,
-	0xebbefad7, 0x148954bc, 0x5eeb1e79, 0x86d2cbe4, 0xeccfe483, 0xf18b7f5a,
-	0x7bff09b6, 0xc5320bdb, 0xdfa92f39, 0x523dfa4b, 0xbde1947f, 0x7bfa512d,
-	0xe7d85dbf, 0x68fe7c8d, 0x7219c97b, 0x7b6d3d40, 0x975f13b6, 0x71483c6d,
-	0xbdd66fd6, 0xe218b5ac, 0x08fe7027, 0xf6d3c619, 0xa4e1eee2, 0x30fdc5cf,
-	0x8954ed91, 0xa29bca76, 0xf1be53b7, 0xe29da9a4, 0x76e6bd60, 0x63bdbb9c,
-	0xac76ef8a, 0xb73358ef, 0xcbd58f13, 0xf6d14393, 0xd8aaec69, 0x29e6afef,
-	0x0f74a3cc, 0x7bdf938e, 0xc862bb23, 0xcce79cee, 0x112e38f9, 0xbae28d53,
-	0x388816aa, 0x537a9fb0, 0xce55de91, 0x77f618eb, 0xe0d7e231, 0x01dd51ff,
-	0x9aaaf686, 0xbf42cfea, 0xd1dea443, 0x642c2d12, 0xe73cf7a0, 0xed0f14e4,
-	0x90d3848b, 0x0f32079e, 0x67ef58ab, 0xcfabfe11, 0x0524b614, 0x5059f7fa,
-	0x7a802ef2, 0x0c5ff7d9, 0xd67b3bf0, 0x8781c3af, 0xa9bf9365, 0x0079dacc,
-	0x35ec2bd7, 0xc847ed3b, 0x7f74ecbb, 0x3b1af948, 0xd6ef778d, 0xbb239f6f,
-	0xc656d7fb, 0x556087f7, 0xb996f783, 0xb7871d79, 0x2fe6bb7e, 0xcbe35768,
-	0x1afe7ed0, 0x89eb8f28, 0xfeb4b18d, 0x8e2978e9, 0x7fcb51ee, 0xa8a9a1ed,
-	0x3963f2d7, 0x4e6fe63f, 0x7d415509, 0x6e1c49ad, 0xee8034dd, 0xc97e28ab,
-	0x7ba5f149, 0x8652beb7, 0xe6fb54f3, 0x60330c58, 0xfb09afed, 0x7ee237ff,
-	0x63d51aad, 0x642f338c, 0x2e78c78a, 0x536118a8, 0x3f23135c, 0xfa11c906,
-	0xe8e31ab1, 0xc5d8113c, 0xa84e7aa6, 0x89780f9d, 0xf8fd838f, 0x3f70aa39,
-	0xe59107d4, 0x76fdfcf4, 0xdcbd8e7e, 0xba39ef0a, 0x9d6b97cb, 0xeeae1c79,
-	0x3349f5c7, 0xe744ff95, 0xb3df9173, 0x23fe5e5e, 0x7aaedebd, 0xe265fbf8,
-	0xfe489b7e, 0x57a5d43d, 0xb4717afe, 0xf4a25bfb, 0x2fdf9e9f, 0xed05a0b1,
-	0xba762d96, 0x67ef0bb7, 0xdb0e73c0, 0x55ffbe34, 0xfdd30ae2, 0x3e843b39,
-	0xd309892e, 0x44fd3e7d, 0xc23cb03f, 0x22f2d6cc, 0x15f4bdd2, 0xb3f8c33b,
-	0x3e9cd7d2, 0xb6e977a4, 0x957f5b6f, 0xb18bf185, 0x7d2bd7e4, 0x1f117fed,
-	0xd3c35a94, 0x2dbcfee9, 0xe7f78656, 0x3b796db5, 0x4db5e51d, 0x9c27a70d,
-	0xb4af5f65, 0x57be6ade, 0x58e38c40, 0xbc42e865, 0xaf3f4177, 0x9e8bd45b,
-	0xdb8632b9, 0x9f18f6d7, 0xdde48635, 0xb1d44f7c, 0xc641c6ca, 0x9e45fbf3,
-	0x7fb17ae8, 0x9d8ffa8c, 0x38f47743, 0x263fdaf7, 0xe699ed09, 0x96407464,
-	0xfa8e3d81, 0xe4eea8bc, 0x7c1ff430, 0x6fdfa316, 0xf9c389e0, 0x73ad33e8,
-	0xcfbfea18, 0x19873bd2, 0x952399e7, 0x92a28f36, 0x8ed2875f, 0xfaf327b5,
-	0xb5378c31, 0xf7a68b4f, 0x12c4c586, 0x8e1e8afe, 0x7a8e7a8d, 0xabe70c4c,
-	0x531f6834, 0x43e5176c, 0x2d33f76f, 0x31b87a44, 0x49ebc3c6, 0xbcf8690b,
-	0x20fb6eb8, 0x950a1e23, 0x72072a6a, 0x642cf84a, 0x832cb52b, 0x2bdbd6fe,
-	0x28f0ef9c, 0xf2813f74, 0x55f8ba7f, 0x3933a6ee, 0x518e3191, 0x5c6614e0,
-	0xe7eb33f2, 0x6fd51448, 0xcc69fc43, 0x646456ef, 0xf7926a95, 0xa94f5618,
-	0x7e2ecc03, 0x43055a5f, 0xec44793d, 0x0c1fa3ef, 0x3d7c6ed3, 0x383f7a48,
-	0x328bb180, 0x4f09bef0, 0xbf80db9c, 0x3eb3706b, 0x2b69e309, 0x5317d718,
-	0x488f68dc, 0x033b00c1, 0x595554fc, 0x03df8837, 0x2f187cc2, 0xf42c2649,
-	0xf37ee5cf, 0x8083b43b, 0x843df94f, 0x1550b157, 0x86c318a0, 0x9e3aefc9,
-	0x96f3fbf1, 0xeb8ccc7d, 0x0741128f, 0x7a4ddc16, 0x7fbac1cc, 0x5aa3009d,
-	0x155b7d45, 0xdc1cb7f7, 0x59b8739f, 0x58c3ed18, 0x42c70b07, 0x1caa18ea,
-	0x2bbfca33, 0x5f03600b, 0xf39ac7ba, 0xf402e523, 0xf5bb445a, 0xf7a83f84,
-	0xbf7a88ab, 0xabf7a88a, 0xe3abd5b3, 0x2836dca9, 0x58a5ef03, 0xf02f595c,
-	0x09b3dbc6, 0x867e01bc, 0xcc7f3de0, 0xfb15e312, 0x18d784e6, 0x962b1bd1,
-	0x8e6eba07, 0xfa7e20c9, 0x4eaedc59, 0x8966978c, 0xc3d70c35, 0xbefd248b,
-	0x1877e64f, 0x1b6e63de, 0xa223e1c9, 0xcf02cd9d, 0x55bf748b, 0xb276f28f,
-	0xb7947abf, 0x263e56f7, 0x6f67797a, 0xde8d89fd, 0xea5ef89f, 0x5a8d8eaf,
-	0x4bd50fff, 0xf47daf65, 0x76efee0e, 0xa03727e9, 0x6e676cde, 0x1a54fd46,
-	0x16b7fadf, 0x4cedc27a, 0xde999a5b, 0xc0dfc831, 0x9a17316f, 0x49f2479f,
-	0xf472fe14, 0x29df7185, 0x61f3bbda, 0xe74d5e7e, 0xbe315c83, 0x9f7cb589,
-	0xdc79eefc, 0x46cb078f, 0x25dfe61f, 0xe1aeeff2, 0x0fdde3f6, 0x1b0fb4cb,
-	0xc1d5bf79, 0xe1efcdff, 0x801f07b8, 0x5f33ddbc, 0xa233850a, 0xdec5dbdd,
-	0x677a878f, 0xde44fe88, 0x9e601583, 0x68e4cb49, 0xbe7160f7, 0x45e1cfd4,
-	0x8b317fde, 0x66fdc5f9, 0x3159e7e6, 0x22dbe26e, 0x0f55a425, 0x82c79eed,
-	0xd1ef802b, 0xc7be04fe, 0x9c592ffd, 0x8d2e66c7, 0x9adfd7c7, 0xa77fd260,
-	0x70e27886, 0x8baf66be, 0x7cfe6ee7, 0x149eb5ee, 0xe54579e3, 0x1ee9ac74,
-	0x9bd52aa0, 0x3d4dfa8a, 0x80f33d7d, 0x07a76a1c, 0x1f218f31, 0x7e1256ec,
-	0x3d24f30c, 0x5084aa95, 0x3f6e2a2f, 0x37bb47cb, 0x5eb3f39e, 0xaebc4b5e,
-	0x177ccecb, 0xe6461dfe, 0x5dcfff81, 0xdff3a1e1, 0xa7fc3957, 0x5d95fe71,
-	0xa380de39, 0xb7043f27, 0xe15771f2, 0x8e7a33b8, 0x7af34aa7, 0x0ebedec9,
-	0xcbf245e6, 0x3fd86d79, 0xc8f9ead9, 0xadfbfd83, 0xd30fd0ca, 0x23de3f13,
-	0x153fc821, 0x24714fea, 0xc194dc72, 0xbc72fed8, 0xfff4146f, 0xe8bf7132,
-	0x52264aa2, 0x08b7571e, 0x34a51fef, 0x913ea447, 0x8f72a64e, 0x974a7b8a,
-	0xd5297a54, 0x56f36bf1, 0xb6983dd3, 0x36fb790b, 0xa25fa0b7, 0x402fe045,
-	0xb52d97f6, 0xed1df682, 0xde308aee, 0x60d2c727, 0xb961c1de, 0x9abf09ab,
-	0x13bf919b, 0x456c13ca, 0x66b55218, 0x7149d10a, 0xc87cb057, 0x0604754f,
-	0xe37da2c7, 0x6987df31, 0xd6711d4d, 0xf8bb31fb, 0xfbc7136d, 0xb7e71263,
-	0xa63fbc48, 0x6e307b36, 0xbb6bb1e2, 0xbc22abee, 0xe38872c3, 0x7ef93ffd,
-	0x37bc4f6e, 0xc0699b4f, 0x327b33bb, 0x0267fde1, 0x5e054bcf, 0xaa1d04ab,
-	0xc4ab3e04, 0xe255afbd, 0x812adcde, 0x3bc42adf, 0x7b888fa4, 0x3d23177b,
-	0xef119520, 0xa1d6bfc0, 0x7b432641, 0x520f0f7c, 0xb75be087, 0xb2a4fc85,
-	0xbc43efc3, 0xde39135b, 0x03a00e6d, 0xdde035f1, 0xc241f983, 0x78e0eaa7,
-	0x0e9cf286, 0xef105602, 0xa739f123, 0xb6fde007, 0x87d424d8, 0xd6784c63,
-	0x1f9fc712, 0xf3e29fde, 0xf390a25b, 0x6a25fc48, 0x5d605efc, 0x8fb37bbe,
-	0x765c44ab, 0x1197b895, 0xcd7688f1, 0xbb0fc02a, 0x3f93e398, 0x2f60221f,
-	0xfd6249a5, 0xc074055f, 0x3d8527fc, 0x74c67884, 0xb75f2c67, 0x762a5a24,
-	0x04a788ab, 0x4b0fdf7e, 0x6cb4b20c, 0xf18043c6, 0x1e641a97, 0xe1fdf584,
-	0xc8ff335a, 0x7ee2256e, 0xc893cf49, 0x56df2b6f, 0x2f7fb82d, 0x74debfcf,
-	0xe69e5bae, 0xfe10f78b, 0x35da1203, 0xb872133f, 0xfa85f902, 0x8bc3d7c7,
-	0x152c1f05, 0x223f06f7, 0x2131e7f8, 0x7ceb8fcf, 0x48e7e5e3, 0xf1e64f96,
-	0x1699898e, 0x9862bf71, 0xe309e319, 0x834cf5bd, 0xc6dad17e, 0x9fdd2943,
-	0x92b63ec9, 0x650ec6dc, 0xf8afe43e, 0xf10c1f8f, 0x7dfd70fb, 0xd78a1ed1,
-	0xeb1dbfef, 0x0e83bf89, 0x711587b4, 0xd7cca4cf, 0xef51cd93, 0xeef2ad8d,
-	0xa65fa1b1, 0xbeecfeb7, 0x73f11b69, 0x1e44e5de, 0xbfe027d6, 0x8ec03663,
-	0xc157581a, 0xc81bd62f, 0xa57a8c5e, 0xebfc49c6, 0x1be7fe80, 0x17b624f8,
-	0xc754ceff, 0x5f501bb5, 0x240680bc, 0x6a2fc130, 0xcf11d906, 0xfa0f7380,
-	0xfea956b1, 0xac2f38be, 0x8fee8f8a, 0xdf2c65fb, 0x5d657087, 0xac2bf26a,
-	0x9ef47d54, 0xef59ac7b, 0x44f314ac, 0x9cb344c2, 0x4fc2f3e8, 0x39577d45,
-	0x5fb13b02, 0x9227a7c9, 0x1cde273c, 0x52a89e7d, 0xf7de20b5, 0xcb8c3551,
-	0xe3573077, 0xfd0f73f6, 0xe49f68c3, 0x3af06054, 0x7ce983f4, 0x7d7190b6,
-	0xaedc6417, 0x04f5c7d4, 0xe715bdf2, 0x3ff13703, 0xcb0807ce, 0xdefc6a17,
-	0xe42dbbe3, 0xe4225887, 0x672151ed, 0xfd7c85cb, 0x8acbe51c, 0x297b58f7,
-	0xab9085fd, 0x90872895, 0xe0cd8f1e, 0x3fb8bcf6, 0x2ccf5f4c, 0xfba08db4,
-	0x161cab22, 0x4f94179a, 0xae0721ac, 0x768f760f, 0x7647ffa3, 0x4e03b966,
-	0xfba2cfcc, 0x2cf8a5dc, 0x37cdf237, 0x9c1759ce, 0xc8161e2d, 0x2b16f74f,
-	0xea4bf72a, 0x8957c8f7, 0xf75408fb, 0xd5fd0ccd, 0xd856264f, 0x9635de29,
-	0xe4d787c7, 0x81de1366, 0x86b19d1e, 0xb4ca5a75, 0xfbeebaeb, 0xec9feac3,
-	0xef835ee5, 0x6960de85, 0x41a17641, 0xfb88d44f, 0xc8279924, 0xc5f41886,
-	0x31268bc2, 0xd4f5eff4, 0xcde8bd13, 0x2e6f5cf5, 0x4deba292, 0xf5d78edd,
-	0xd17ea466, 0x4c17c5d3, 0x54bf9d36, 0x7a465e1d, 0x3f744867, 0xcac3b242,
-	0xd7992ff7, 0x33d19b9b, 0xec95f01f, 0xed0be030, 0xf16fdd21, 0x89e328e3,
-	0xae4793d4, 0x00d7e7d3, 0x4b343bdd, 0xfa393cf3, 0x79abf3ac, 0xfd3fc85e,
-	0x794fcd08, 0x5a5347a7, 0xd92d7350, 0x69770c23, 0x1c2ef70c, 0x0bbf7d5e,
-	0x46b87be9, 0x56af9fec, 0x74bf1843, 0x197166b8, 0x0f76d5c1, 0x2fdc66d2,
-	0x3de1741e, 0xc8d6b34d, 0x247e9fb4, 0xf14e9826, 0x399fdf9f, 0x63e21b23,
-	0x9a5dac16, 0x6b38fc8e, 0x373a52dd, 0x37c1247b, 0x59806fd8, 0x79ec8796,
-	0xbcc6fefd, 0xb43ead67, 0xdbe37bc7, 0xfdd1d5bc, 0x27f8553d, 0x779853ae,
-	0x7643ae08, 0x8674c6bb, 0xfc8e0f81, 0x82eb4ec2, 0x8ed82d2a, 0x58bad570,
-	0x2555837c, 0x280fbf44, 0x0fb571d5, 0xf0ea94e9, 0x73298b5d, 0x4f7ed024,
-	0xdbc472ef, 0x3b5f456f, 0x2d3ebbee, 0x3a0245ee, 0xbbf264dd, 0x56d77df2,
-	0xb66347e1, 0x4463f25e, 0x7c97a7be, 0x62938f17, 0x7ff9e8ee, 0x6869ffb7,
-	0x315df58f, 0xe6b4bf8e, 0xe84f92f8, 0xa11f7989, 0xcf8bc450, 0x5a1b175a,
-	0x66ce4518, 0xb3c7f389, 0xce997ec4, 0xebd7858f, 0xe3e739f6, 0x5e973e48,
-	0xfaf884b8, 0xcd2a7dcb, 0xafc0656b, 0x17a5efa8, 0x507dd346, 0xe2bb9e0b,
-	0xfc0b8c71, 0xf94cbf6a, 0xc4eda725, 0xf53fedc7, 0xce8239d2, 0x9df4a9df,
-	0x5df6af88, 0xda01e74d, 0x3ad3fdc5, 0x7c9cd29e, 0xc1c6bc3d, 0xe9de50f5,
-	0x743c919f, 0xa66857f1, 0x779e7286, 0x5e5ce7fa, 0x31d9fef0, 0xdeebec38,
-	0xe0a1771c, 0x2cd7806b, 0x2169349f, 0xc2df9bd4, 0x0d8d8ae5, 0x7b1f9196,
-	0xd1f7ac6d, 0xc6bff228, 0xb5f931e1, 0xf3965bf2, 0x4caec0f7, 0xcc99c434,
-	0xc87bdf12, 0x65efcd3f, 0x4b20ee65, 0xfa127945, 0xcc0e5bb0, 0xdbb772f7,
-	0xd3d4e3cd, 0x79c6bb17, 0xd6fd6985, 0xe8abce3d, 0x53b09e79, 0x13465bf2,
-	0x5f9e3ddc, 0x9e368e8d, 0xa58c71ee, 0xd1f1edf2, 0xb450ffdb, 0xc0595adf,
-	0x8b4fa07c, 0x79bffdc4, 0xd434fba1, 0xe3ab791f, 0xb8c32413, 0x4d8a6bf2,
-	0x35794ff1, 0x5fdf74b9, 0xed5ceafe, 0x76bc835e, 0x36cd85d1, 0x4743e5d1,
-	0xd532e880, 0x40e3dfe1, 0xf0a17cb9, 0x583d4f81, 0x11d3a72f, 0x82bc382d,
-	0xae7ddbf4, 0x3ea7e768, 0x8d53a48c, 0x1fac13a0, 0xd2740cb2, 0x7ef913e9,
-	0x07d2faeb, 0x8bfdc53e, 0x45edf8a7, 0x08b1ebbd, 0xc74465fa, 0xf383a75f,
-	0x0fd82b6b, 0xdfc2f381, 0xbbf8a665, 0xe827f15e, 0x7f47e3ad, 0x51dff60e,
-	0x944efb94, 0x1f5851cd, 0xe17387e7, 0xc17dbbad, 0x8fa2e30f, 0xf3a9c527,
-	0x04167cc3, 0x71aa3e01, 0xf1f7a3fb, 0xb682c43c, 0x974f18f3, 0xf1362e9c,
-	0x01738a43, 0xff415397, 0x211e7ba3, 0xc50d6ebe, 0xbd19ed7a, 0xd9c5278f,
-	0x185c1f0b, 0xffb34364, 0x11c1f1ef, 0x29f837cd, 0xde60479c, 0xf0bd79c2,
-	0x1b86c7f9, 0x18ea97fb, 0x79c4e697, 0xf6fcfaa9, 0xbde383b7, 0x1e1d70fb,
-	0xab7b275c, 0x8e254860, 0xbf7c60c0, 0x37f4f5c8, 0x145bdfe8, 0x68f0c4ff,
-	0xcae2f476, 0xdfa0977d, 0x99b2aab5, 0xc5d85552, 0x0ce2ed0c, 0x688f5dfe,
-	0x2b5e05f7, 0xcae2ebf4, 0xb5b7ee66, 0x70db9905, 0x323b00cf, 0x8ad8fc92,
-	0x69cf6cc3, 0x7e8dc06a, 0x83dc4d73, 0x65812aa0, 0x67e85919, 0x1a0ccc4a,
-	0x938d77f0, 0x4f2cd7ef, 0xfdc6e3dd, 0x8fd42b10, 0x9a5b33fe, 0x77e4ca72,
-	0xe5995d7b, 0xd7e93a04, 0x7ab0c744, 0x1f91249f, 0x1f8454f2, 0x1fa994f2,
-	0x7da6cd89, 0x28bc488a, 0x281dfe36, 0xb3ff0985, 0x9dfe87c0, 0x3e6ea5a4,
-	0x8fc295ce, 0xaffa04fd, 0x363b022f, 0xc1f645d6, 0x7c2c0b92, 0xe853687d,
-	0x3c6b2bbe, 0xf1c5af2f, 0xff71d871, 0x59f5c643, 0xde276098, 0xd5d32610,
-	0xf1c2128b, 0xdc2123cc, 0xe0978587, 0x5c63a37a, 0xfcf803cb, 0xd7207b79,
-	0xa6ff7809, 0x0901f36f, 0x81fc33f7, 0x35cf118b, 0x03d33072, 0x772d7fe5,
-	0x74b96266, 0x8138fac8, 0x39e017a7, 0x9f618087, 0xdcd7df94, 0xe13dcb0d,
-	0x112be60b, 0x5fdf86fb, 0xc7b7cc6c, 0x1fb02af8, 0x4acbdf91, 0xfda242fc,
-	0x074cfc41, 0x34fdff9f, 0xf2772f3f, 0x07f10575, 0x6e3ed7f2, 0x3c529d3f,
-	0x87efb871, 0xb4dd79d8, 0xbcf363ef, 0x114f686e, 0xe05ad8eb, 0x4fb0c557,
-	0xb3e2a177, 0x545d3f20, 0xfd8dcf0d, 0x2727628d, 0xf2dae838, 0xdebd76a8,
-	0x83af3c3f, 0x4f4f94f8, 0x92247b22, 0xed74762f, 0x69eff027, 0x9e33a1dd,
-	0xf1c388b2, 0xfad1ff4c, 0xfdae93ee, 0x761c45aa, 0x5efca873, 0x69fe3fbe,
-	0x99c51c6e, 0xa3b8fdea, 0xda336969, 0xf53477c5, 0xbcf8899d, 0x3fe2e0a3,
-	0xed43ba63, 0xfa8b13dc, 0xce897ee2, 0xc1f9dd97, 0xa42c6aeb, 0x475fdf5b,
-	0x2f3c1ff7, 0xeb3a71e4, 0x01fe9154, 0x7ef8d6e6, 0x47df8857, 0xae02bcc5,
-	0x715fd157, 0xdb743877, 0xf3dd000d, 0x3406e87a, 0xebefa6f7, 0x43d5037c,
-	0x893ddea0, 0xf7f494f6, 0x726fbd1a, 0x35d7bf98, 0xe346c57e, 0x8daf1ee9,
-	0x0f8fafc6, 0xeff84a7a, 0xf7b88fc2, 0xf8c7c74d, 0x77dc7c99, 0x1d75dec4,
-	0xe03acb3b, 0x3fb0db0e, 0xde3e78f3, 0x7cfc489f, 0x1fa05985, 0xf6fa745f,
-	0xe33e3f20, 0xbd45edf4, 0x4ceb6257, 0xbc920657, 0xcbcf85bc, 0xc905c0e4,
-	0x0313fe30, 0x21271702, 0x9cfb9a1e, 0xc07fbd97, 0x80fbf9ce, 0x81f7f39d,
-	0x5baf9d0c, 0xecd7c89c, 0x538d2274, 0x92c77eff, 0xbb1f87ad, 0xc4fbf81d,
-	0xbb3efcdb, 0xe373d952, 0x9697e443, 0x3e2e3199, 0xfc203d32, 0x7c5d2d0c,
-	0x433bc7c8, 0xa332f2e1, 0xc1ce9621, 0x9b2f98cc, 0x319fdbee, 0x32c3c79f,
-	0xadf879a5, 0x22c275a6, 0xb3d2d711, 0x4483f41e, 0xfe7333d6, 0x6517ba04,
-	0x471ee69b, 0x9c35917e, 0xf44e66cf, 0x608e78c9, 0xf68932cc, 0xf21f47f1,
-	0x3c00b634, 0x45ef1433, 0xe0f99d31, 0xfbc20d7f, 0xb99aca51, 0x9e45347f,
-	0x4853f993, 0xf3e1ed57, 0x1073c23d, 0xc79f0e4f, 0x69cfd861, 0xdd322b53,
-	0x38f7cfc8, 0x7207a87c, 0x827df56f, 0x22fdd574, 0x0afbbcfa, 0x171801d8,
-	0x27b77b9a, 0xb724f907, 0xd4a3eede, 0xd01894c6, 0xb30ab96b, 0x31a29a61,
-	0x0c698ec5, 0xbd9a61b3, 0x354fd850, 0xe0fd9137, 0x786bf1ca, 0xd36e79bf,
-	0xfbe35ff3, 0xb7784af9, 0xdcabe064, 0xa3bfb7a6, 0x3f3e7673, 0x565efdc5,
-	0x9fd699a7, 0xf0cdeac3, 0x38668de5, 0x47866c33, 0x65c333ee, 0x67683638,
-	0xe11ef88c, 0x86569d9e, 0xde2b2bdf, 0xf438a56c, 0xa0ae7157, 0xe93b5e78,
-	0x4dc509c5, 0x712718d9, 0x05a745fc, 0xfe3b95fd, 0x59c532fa, 0x658a6e74,
-	0xfbb86718, 0x831618d3, 0xed9bbc71, 0x18bf30eb, 0xd9fe8768, 0xb5f6cde2,
-	0xedb34f18, 0x434f9d52, 0xedb50f14, 0x4bbcfc6f, 0x086b06e7, 0x6f8e2ee3,
-	0xe445fe7f, 0xfa1be3cb, 0xaaf61d93, 0x7d60b414, 0xdd3847c1, 0x3ebd08c7,
-	0xe2f5e846, 0xfc7af33a, 0xaf6e970a, 0xfce287ba, 0xe3812637, 0x2fb2b5bb,
-	0x2577c587, 0x8c6dfb74, 0x40dd67b0, 0x7687cfcf, 0xd08879d3, 0x7ba179cf,
-	0x6bd11f35, 0xb3ea0c41, 0x0cdaa38e, 0x5c5d4bf4, 0xcea3c663, 0xcc8497df,
-	0x24ba27cf, 0xcf0ce7a1, 0xc55e3033, 0xe71524b3, 0xdfa367ef, 0x8bbd7f53,
-	0xbc2f19db, 0x20f2e9a0, 0x992a7b8b, 0xb2ae70c7, 0x79b3ef5b, 0x089e31fd,
-	0xfbb035e9, 0xbb447179, 0x2eb1fd7a, 0xda5fcf2e, 0x448279f8, 0x95638781,
-	0xe86ec8fb, 0x7d2b23b2, 0x380689be, 0x727766af, 0x776fe12e, 0xf986bdf2,
-	0xdec364aa, 0x4e30bbe4, 0x8f414eae, 0xe3b92b36, 0x498f9fb9, 0x3d72e7c4,
-	0x11f313f6, 0x6ff56d8f, 0xd81cb0b8, 0x718c23d9, 0x5735f967, 0xe41a26fb,
-	0xb9f287fe, 0x3712b74e, 0x392bcbc7, 0x9cf093cd, 0xff0d7148, 0xfd71618e,
-	0x80dcb76d, 0xcfcd5ef8, 0xcc2b67d3, 0x963c832f, 0xfaedb96c, 0xfcbcf061,
-	0xec5e5199, 0x2b71540f, 0x78de2f3e, 0x3d15ce92, 0x8efee16a, 0x0504fa48,
-	0x13fa3d9f, 0x39ea0147, 0xcb75efa8, 0x9f7f7a08, 0x239bec05, 0xdcef83e3,
-	0xb38e4505, 0xa06f0ffa, 0x9f3330f8, 0x684bdf02, 0x97ae75bf, 0xe9e8ebbc,
-	0xd19becc2, 0xa02df754, 0x8fc87978, 0x0c297eba, 0xa489eb99, 0x6fc16aef,
-	0xe4621bf0, 0x7d72c893, 0xdce904a6, 0xd07cc974, 0x43ff0693, 0x8a6aa1c9,
-	0x076c8dcf, 0xc1985823, 0xe181da0e, 0x9b972875, 0xfc169c78, 0x88b65b24,
-	0x61c41f63, 0xf915c7ba, 0xf8a21811, 0x83d13652, 0x4d99bd78, 0x37d754c6,
-	0xc3f5396d, 0x52abfcb1, 0xa2bf73cb, 0xe7249cfa, 0xdd30ee6d, 0x9c4fdb6f,
-	0x70f36f47, 0x8feeff58, 0x64d45f9e, 0xe3aeb8a7, 0xbfd23427, 0x149e300b,
-	0xb768bfcb, 0x3d68c058, 0x78cfa5be, 0xab6e538c, 0x1fa5f7e7, 0x5e33efab,
-	0x1ebccb3b, 0xf9f44fa9, 0x39fe20f6, 0xbe7afd1a, 0x83ce1726, 0x771c788b,
-	0xcc8a9f4a, 0xd274288a, 0x2ad44bdf, 0xd3fd7132, 0xbbc38f79, 0xcc14f08e,
-	0x9fefc850, 0x5c9a7e4a, 0xe83a9fe1, 0x02edbff6, 0xaca139ba, 0xec25fe0f,
-	0xdfa1d793, 0xfbd90bf3, 0xf7507b80, 0xacacfd3e, 0xa3df9d00, 0xfb40f40f,
-	0x56161533, 0xe266df80, 0x609c353c, 0xae674f9a, 0x719e2896, 0x78f372d6,
-	0xe36ebef0, 0xaac05afc, 0x5622dea9, 0x6ac1694f, 0xce217e73, 0x273c2e47,
-	0x8a76e3c7, 0xfaf9cd6a, 0x8d92c0b9, 0xf0d1ac67, 0xc7d335f6, 0xc702fbe7,
-	0xa36cdd27, 0x2ab7ddfe, 0x6977ef8e, 0x6df387cc, 0xe9272ae7, 0xa01662ff,
-	0xe629dc7e, 0x7307f2fd, 0xed20b37d, 0x37d33f98, 0xcb9e0fab, 0x2d23f3e7,
-	0xf99e4919, 0x13c57ebd, 0xbf007859, 0xbce187cf, 0x8524dc5b, 0x036c2187,
-	0x9fc11d51, 0x3826bde3, 0x3679e37e, 0x6e38fc7d, 0x3ef673e3, 0x9e116fa7,
-	0xb8f9929b, 0x0225f98d, 0xad1b251f, 0x98d17f26, 0x79d0528d, 0x6aaf9e39,
-	0x1acaf7a1, 0xf54d58ce, 0xec1d798a, 0xba076601, 0x2b58298d, 0x755660e3,
-	0x25d0f1e9, 0x1ccbced1, 0x755c7810, 0x945f5e5b, 0xbed1c7db, 0x9d1027ed,
-	0xf84a7a43, 0x06d858a3, 0xec8cc5ed, 0x7b3f2982, 0xe2938721, 0x26a6bd1e,
-	0x4a2fbe8d, 0x653361fb, 0x0e789bff, 0xd03e32b3, 0x99da0e37, 0x2ba5f169,
-	0xc1bebf24, 0xcf9d6fe4, 0x88e4f0f1, 0xa22a4b8a, 0x3a75b7ac, 0x53d5213f,
-	0x3b70409c, 0x599da79f, 0x20c06a9d, 0xb8e32317, 0xd3db8cbe, 0x3a8fe742,
-	0xfe744ab7, 0x20e929f9, 0xea7e0f9d, 0xff430f5a, 0x09d02a40, 0x1253eff5,
-	0xfcf7845b, 0x34dc3565, 0x73a40de7, 0xe3178c56, 0xc61b4a0f, 0x1a0ea5c9,
-	0x62e3b73f, 0xbee2d62b, 0x218cca54, 0x61df9023, 0x866e33dc, 0x3ce3a3e7,
-	0x075f5ed4, 0xc2ea7ba7, 0xa1dcc660, 0xce7fbed8, 0xc38f281b, 0x7cbce862,
-	0x99cae00a, 0xb432e940, 0xe65952cf, 0x5333b46e, 0xa04678a7, 0x8b957f4f,
-	0x916493b7, 0xf684dc67, 0x270e08e3, 0xd6f92c3c, 0xa0ae1311, 0xfcac5276,
-	0x1cf87a93, 0xfa1b4ded, 0x7a061c27, 0xc4c8a84f, 0xf10653f6, 0xa70b5134,
-	0xbbfb3d61, 0x75a01ee8, 0x23373cc8, 0xbbef3d7d, 0x2eb82971, 0x0b06dfdc,
-	0xfb63d075, 0x97fdf4d3, 0xfbec83b0, 0xf2f0870b, 0x97994ec2, 0x24e7cfc9,
-	0x15f6eba6, 0xfaa1d72f, 0x5ea246e2, 0xf9db8f7d, 0xe47c395f, 0xeb42bf07,
-	0xa0803ce5, 0x58e9f953, 0x0bcc3216, 0x21bed3e5, 0xb4fcb3fb, 0xef1cf4cb,
-	0x95c63509, 0xa1ec1497, 0xb2943bef, 0x509f3a66, 0x838e6f5a, 0x7a2622bf,
-	0x979f3abb, 0x3059969f, 0xf99abb6a, 0x2c3ee9f9, 0xb95a27d8, 0xd3f3f364,
-	0xfc6e1992, 0xe8539456, 0x7169cb39, 0x0a71fae1, 0x67a847ce, 0x7aa09642,
-	0xda5d3779, 0x79a62ddd, 0xe1c3dda8, 0xa8bfb10e, 0xb7f5ebe7, 0x39c4d34f,
-	0x7bcf7e3d, 0x2028255b, 0x4dd3cfc0, 0x5ddfc927, 0xf09bb4d2, 0x3745f3a3,
-	0xd059629e, 0xaae4a780, 0x6405b0e6, 0xfdb8e9fc, 0x025e874b, 0xcba3d924,
-	0x7d4b3bf3, 0xbf1f2163, 0xef90616b, 0x792eacd8, 0xcab37527, 0xf0fd0b22,
-	0x6389d2ee, 0xdf2f308d, 0x35f37efd, 0xb2b78113, 0x6bf7f286, 0x6b7bdee3,
-	0x7506c621, 0x4ce83b9d, 0xb00d3bf7, 0x0076022d, 0xbb00cc3c, 0x2313f223,
-	0xe02353f2, 0xcdbe5e34, 0xbd974e19, 0xfb8e6d8c, 0xf4051ae0, 0xf0df5b5c,
-	0x6479bc74, 0xd747d579, 0x4b8ef7e0, 0x7bf7f8b3, 0xaf249acb, 0x65a3d064,
-	0xe4871e5e, 0x3368b6f0, 0x9a1e2287, 0x507d44df, 0x71b928d2, 0xdfa8e0fd,
-	0xdf182612, 0xabde18f3, 0x92d3ebe7, 0x5ef483fa, 0xb10ff5af, 0x3a3f3c90,
-	0x772a73e4, 0x362dfdae, 0xaf3dfcc5, 0x52bbf6de, 0x50b7812d, 0xc7f7eadf,
-	0xa8f96db7, 0x20aa7bfb, 0x7d7ded7f, 0x469f497b, 0xc72f5b9c, 0xe5ba38fe,
-	0xa3e3c745, 0x7dd14e43, 0xd6187fba, 0x079a01f4, 0x2e4ef3b1, 0xff75abc0,
-	0x14787a54, 0x27785fda, 0x4f1fce2f, 0x704ba148, 0x059a7a5e, 0xef76c12e,
-	0x3768bd29, 0x80ec6a7e, 0x5e0cf2da, 0xdc4df309, 0x01ffc249, 0xfc00cb67,
-	0xc7e9dd64, 0xa4e1c2ff, 0xe609ba16, 0xafefeab6, 0x1ecdefc1, 0xc032d018,
-	0x8ff7f002, 0xe0993a5f, 0x419e5a8b, 0x04eac2f8, 0x196b0f0e, 0x03fbc320,
-	0x23267d83, 0xa3bbd6fd, 0xa109fdcb, 0xc5fef46f, 0x891df60e, 0x84aafb43,
-	0x2c783bcf, 0x757a06da, 0x4db1d17a, 0xd31f01eb, 0xf49623ff, 0x5bb6fadd,
-	0x1e13f3ae, 0x6f8c7e82, 0xa6f8114c, 0xbbf49179, 0x5f44f642, 0xba130b9c,
-	0x6f4ce9e9, 0x71bcd0f6, 0xb416c569, 0x0fa6521f, 0x55e379a5, 0xee27ef97,
-	0xe9e9dd51, 0xc4fe9e24, 0x5bfae6ed, 0x46bc50b6, 0xb24e43ca, 0xdf171eab,
-	0x23b90067, 0xba0870fe, 0x3c7cdc58, 0x73190dff, 0x80001bd1, 0x00008000,
-	0x00088b1f, 0x00000000, 0x7dddff00, 0xc594780d, 0xbbbcf0b5, 0x26effeef,
-	0xb24d9bbb, 0xf379f909, 0x71100843, 0xa9189313, 0x18884dd6, 0x220bb531,
-	0x49716b62, 0xc93049f8, 0x2d16ad46, 0x544859bd, 0x46d10882, 0xe1b80a04,
-	0xfd2b6202, 0x1a8c4582, 0xf68882e8, 0x72dfbd2b, 0xbd3fadeb, 0x8a7e1bd7,
-	0xb4564288, 0xeb6dea5c, 0x2666739d, 0x5c9377d9, 0x9f7b7aa8, 0xbe8f8be7,
-	0xcef33bce, 0xfe73399c, 0xb3339ce6, 0x9086bb1a, 0x258e4264, 0x4ec730dc,
-	0xe631df9f, 0x224c9d15, 0xf433bba4, 0xc84b499c, 0xc421127b, 0x09f04845,
-	0x0e7b6853, 0xd1eddf21, 0xb4897504, 0x734de1de, 0x44b2d116, 0xc345bd7c,
-	0xd57fbde5, 0xd2b3e5de, 0xd32d3172, 0x9912abe7, 0xbd33f58b, 0xfe5a0e69,
-	0xa7aefe02, 0x9f561ee5, 0x58ad25ae, 0x7fbec39f, 0xe5dc84aa, 0x76d4cfa3,
-	0x7d296e3a, 0xb5b89dae, 0x916b8e9d, 0x0bca1789, 0x5d6c16e7, 0x736a614e,
-	0x897842cc, 0x51269bd7, 0xe6364ef8, 0x76d1566a, 0xc8afa7bf, 0x515c8435,
-	0x97b0cde0, 0xff40f9d1, 0x44d21c74, 0x3c369527, 0x37981cfe, 0x7ad7afad,
-	0xcf3a64b3, 0x39fe1ddb, 0xe35ebed0, 0xd0b4429d, 0x77c0b789, 0x8823b405,
-	0x3b76399f, 0x40f227b6, 0xffffbc19, 0xb8954f08, 0x4f115fee, 0x7534ef77,
-	0xf8242c9d, 0xb7fd05f7, 0x2aa1d7b9, 0xbad2fa07, 0xcb871a4e, 0xd0ffc377,
-	0x24ad4871, 0x2c3a1493, 0x8d6e22ab, 0xbfe836ff, 0x7a07e979, 0x513781a2,
-	0xf02ff43d, 0xeb0a4ebe, 0x82fce952, 0x76cf24fb, 0xb2cfdec2, 0xe8959211,
-	0x21e613bf, 0xc3f79ee0, 0xd17f34e6, 0x3f2c7cf0, 0x76e6a978, 0xe4b79c5a,
-	0xf4edaecc, 0x590f79fb, 0xdb865108, 0x9d711ed3, 0xb8cf7fdf, 0x9f495c9a,
-	0x86b0defa, 0x19fdebe2, 0xb69cb3c4, 0x1a435f7b, 0x73efff00, 0x743f95bc,
-	0x853211f7, 0xb5d95f90, 0xd0499df8, 0xbddbe483, 0x53b7e288, 0xd0234122,
-	0xd23d4cc3, 0xd28860c3, 0xfeb095c3, 0xfbe87d74, 0x872707ee, 0x067d7482,
-	0x619100c9, 0xbec4153e, 0xbfa9895d, 0x29eb00a3, 0xb44d049d, 0x0e68da3e,
-	0x5e80956d, 0x50a5a028, 0x5feb093f, 0x07fad895, 0x38e230ef, 0x1d1933dd,
-	0x433a3776, 0xb6001cc1, 0xc6de008b, 0x7694a3a2, 0x64487482, 0xb69994ef,
-	0xe36c7c61, 0x3a52c172, 0xb4dbe2f0, 0xe4dab23f, 0xb01f4f19, 0xbb943284,
-	0x4a3c7152, 0xbe91ab0f, 0xfd470664, 0xab42d38f, 0x394f5c70, 0x36a3cbac,
-	0x1f787cef, 0x014591fd, 0xc89937f8, 0x7d09634a, 0xe8c3a44a, 0xe1c0eba4,
-	0x134f5d21, 0x60bb83a0, 0x7f878a00, 0x536f386f, 0xd89ffbe8, 0x08038425,
-	0x484e58cd, 0x75f5611d, 0xa4c72ccb, 0x86d4f029, 0xddf4090d, 0x03bc1bca,
-	0xd972be82, 0xf3fb48d3, 0xeb22ba73, 0x83c036a3, 0x804bbe1f, 0x29b73ffe,
-	0xefd32856, 0xd3f2c0a7, 0xbf870bef, 0x7df039ff, 0xe0c7c019, 0x65166d27,
-	0x1f8c34bb, 0x80b9fcf1, 0x6f69ebaf, 0x9c6278ec, 0xd98f7ef8, 0xf007ffbd,
-	0x4e1ef145, 0xb45e0174, 0xf0f1aeb8, 0xc7d1f4ba, 0x5e7eb44d, 0x82b1d69b,
-	0xd4bfd3e2, 0xf015f386, 0xbd1a95de, 0xec8de48e, 0xa5a594ff, 0x2ff9865c,
-	0x964f7465, 0x62e22819, 0x2e1fa2f1, 0x485dd253, 0xd23587a2, 0xf0e5ef28,
-	0x517f8001, 0xf8f7cc77, 0x621abfdf, 0x21be09db, 0x3f07148a, 0x92452ba7,
-	0x12fcdd61, 0x3ebd375b, 0x56e40f3a, 0x9f02dc3c, 0x8de5c6ff, 0x7c788ba0,
-	0xbbe01bff, 0x5dbe246c, 0xe84c81fa, 0x80d4bfd7, 0x9fef8a78, 0xf77e1090,
-	0x4d0489b4, 0x4bd6ee94, 0xfaebd212, 0x90212d07, 0xe8a6839b, 0x6067c00e,
-	0xdeb88dff, 0x0acd1ae7, 0xea364da1, 0xf705bf19, 0x171f18db, 0xdc80140c,
-	0xece7473b, 0xee73eba5, 0xa09eda37, 0xa4208024, 0xadda37e5, 0x5ee7ff40,
-	0xb3f589be, 0x5a10a2dc, 0xe986000e, 0x7fe081b8, 0x578a11b6, 0xc7119669,
-	0x0a57b13f, 0x8fbea019, 0x5e4639e2, 0x36ffa39e, 0x8dcb0c94, 0x3800a841,
-	0x07082cfa, 0x8e23699d, 0x59335df7, 0xd16fc745, 0xad0d5e48, 0x2932596f,
-	0x31e0ced4, 0x16d5cac6, 0x4a90e90d, 0x45bff986, 0xdee0bc73, 0xa7275622,
-	0x60ac7970, 0x851243bb, 0x3ab8c9b3, 0x05fa05a2, 0x4bf5a03e, 0x78673ea0,
-	0x7f565a1d, 0x479817f4, 0x7d351ecb, 0x9eaf3d34, 0xba5892c7, 0x17a619ca,
-	0x17c3294b, 0xf1a126a9, 0x2f1b5e14, 0x21226a5b, 0xe963e02d, 0x2ae27234,
-	0xc0e0f4da, 0x5b23a074, 0xa3a92f69, 0xe269c0cf, 0xa7b8510d, 0x36bcf7f6,
-	0xd477b68e, 0xba613244, 0xcdbfa581, 0xf0d5793b, 0xaf380b3a, 0x4b427fe9,
-	0x7e1e38ac, 0xeef14147, 0x89bb62b6, 0x7d88aeb3, 0x92efc0ae, 0x0f2f4c35,
-	0x1fe02bc0, 0x75cde999, 0xfd526f5c, 0x617af28a, 0xafd404d7, 0xce40ffa0,
-	0xf4c0953d, 0x903dc831, 0xaa8e6d33, 0x9e741cab, 0x14d56766, 0xc71b1947,
-	0x27e98367, 0xa788fea1, 0x243d78eb, 0xb5e6a5da, 0xc75ab716, 0x0cf9476e,
-	0x90dd16f1, 0x2c88e4c8, 0xafd17961, 0x10ab3d75, 0xe6e9193e, 0x2839cdde,
-	0x97481b97, 0x89bce81e, 0xc740f484, 0x98248c8b, 0x1162e940, 0x9f48966d,
-	0x881bd78b, 0x8d7eb312, 0x89b97521, 0x49bb85cb, 0x7bbfbf04, 0x357d5c67,
-	0x7d68db09, 0x2d8491b3, 0xd755ecf0, 0x8e7d50b7, 0x85f7d67c, 0xe93df621,
-	0x8bbdf366, 0x3aa3bbaf, 0x79d3f5a4, 0xdd51306f, 0x5d0684ea, 0x97533eb8,
-	0x267ae0f5, 0x1e737896, 0x2bf2bd06, 0xa52b679d, 0xf5f03fdb, 0x6639f812,
-	0xbc00aaaf, 0x9c1ab59b, 0x0361f47f, 0xd524e7e2, 0x6bfeb0e3, 0x59aee41d,
-	0x8dae79f4, 0x8075f378, 0x2cd67b26, 0xaf3c48db, 0x00d4c57a, 0xd0e0d374,
-	0xd32ae8a8, 0xf972c3a1, 0xe5ff8e0a, 0x1cd6d096, 0xa014f744, 0xa15cf2a7,
-	0x9994c957, 0x474c7cb4, 0x6e5a3bed, 0x43f56399, 0x4f60037f, 0x0efdf2d0,
-	0x77eecf26, 0x453d71e8, 0xd057cc59, 0xfb071d0d, 0x9ec55f33, 0x43658e02,
-	0x74609fed, 0xbaf0f5c3, 0xea0f7346, 0xd5fa21e1, 0x22dfa410, 0xfaf01e9f,
-	0xf32b970a, 0xf8a16ec1, 0x1412857e, 0x2f608fc8, 0x3e295fb3, 0xe5a52de6,
-	0x79174e57, 0x67402956, 0xf2bcde4c, 0x4159331d, 0xccf37c87, 0x27fb1f4f,
-	0xb4fe7f5a, 0xfad0315e, 0x746b4005, 0x88915efd, 0xbe0bc617, 0xbe810868,
-	0x7b33d26c, 0x15ff69b4, 0xfbd19ecc, 0x71842c37, 0xc079d05e, 0x084a69de,
-	0xeb03b73d, 0xa2943cd3, 0x863aabc9, 0x16cbe0cf, 0xf439bdf6, 0xa0bb9fb3,
-	0xa413d53e, 0xff26a3ed, 0x74d75846, 0x7a889283, 0xc25ad7f9, 0x381709c6,
-	0x878f5e28, 0x9c7ddd98, 0x4e304956, 0xa1fb0dbf, 0x90b69a7c, 0x33a273f6,
-	0xe543e715, 0x2759da2f, 0x82b618d6, 0x34375dfc, 0x8fed84ae, 0xd3d37ceb,
-	0x8bf8f968, 0xb4e59ec5, 0x0fa7d06a, 0x073d29eb, 0xafbb32d6, 0x016ca35e,
-	0x16fd90fc, 0x8f58879c, 0xb5c59ac0, 0xb2581f50, 0x8f9016ec, 0xc839f163,
-	0x3723127b, 0x166891cf, 0x86c6d3f0, 0xe830dedc, 0x1e89fe95, 0x4dc4af54,
-	0x8dd29f17, 0xa93db59d, 0xee8df863, 0x5f3d21d3, 0x1740ff6e, 0x43d33972,
-	0xca804e30, 0x0ff82265, 0x594c72e5, 0xad995a3b, 0x5495e063, 0xeba9df6e,
-	0x47fc1253, 0x9e5a5d60, 0x97f78ffc, 0x145e302a, 0x4ae922e5, 0xa93cbe46,
-	0xba03cef3, 0xf5875475, 0xfd7a3175, 0x99d983a4, 0x076e06f5, 0x963eb092,
-	0x797d450f, 0xc5ee9a95, 0x7fa704f3, 0xf7c9845b, 0xce1af591, 0x401ab71f,
-	0x20654d8f, 0x23d06c93, 0xc15fe856, 0x0e9ea7fe, 0x3969ebeb, 0xbf58597b,
-	0x4f813f88, 0x46c3be28, 0x1b93ef3a, 0x29bf8c6c, 0x459fa01a, 0xe5f50415,
-	0x63b52d22, 0xd2bde04b, 0xe5d74037, 0xa40e8bd4, 0x8a67f22f, 0xf9ef8a15,
-	0x5033b784, 0xb1ca97bb, 0x30a43a97, 0xafe60bec, 0xe5356c37, 0xb57b5f00,
-	0xcdcf5836, 0xf9b1ca12, 0x1b05951d, 0x9ec97968, 0x13fd702b, 0x2e5d182a,
-	0x2f503909, 0xb1f2e54e, 0xa3d210de, 0x8933fe1d, 0xf6883ec0, 0x1374f68f,
-	0x64ad28fd, 0xae401e24, 0x1421e8ab, 0xd1f6a653, 0x57265ed4, 0x24e79509,
-	0xf2126ec6, 0x8938e41e, 0xf4d503b3, 0x88fa1411, 0xa4a23dc9, 0x7213dc82,
-	0x97dd98f9, 0x3e3b44e8, 0x97d6153f, 0x9b9327ae, 0x6bc425bb, 0x7d456933,
-	0xd0c0f422, 0x9c8f5cb8, 0xbe9906d2, 0xcf813c32, 0xae0e677c, 0x8bd212eb,
-	0x95e844fa, 0xdf20e8b1, 0x88fbe1a9, 0xbc60e9d1, 0x9afec153, 0x75f0934e,
-	0x65a6bc74, 0x853cdc24, 0x50536d3d, 0x693d323f, 0x9e127a64, 0x97d0cbe6,
-	0x5e31faf1, 0xc1ebc61f, 0x77d33d54, 0x3d859d62, 0xd98d3a93, 0x85975301,
-	0xfc08a4b4, 0x94eade35, 0x26bb61e4, 0xa8d18ef0, 0x1f65095c, 0x9ef905c9,
-	0x2a62f950, 0xc4c80fad, 0xa1657c0b, 0xefa1e978, 0xb7fb7337, 0xd7cd9527,
-	0xabf467ad, 0xd8a47d93, 0xc112eb0a, 0x99346f7d, 0x051e81d8, 0xe8db373e,
-	0x1df02577, 0xefa1b7e3, 0x1cc3a48d, 0x2bd57df3, 0x173fd426, 0x0c85b65e,
-	0xb3f88f68, 0x94bfb41d, 0x4ed01bdf, 0x0d8af73d, 0xae39e9f5, 0xefc25d0f,
-	0x7e611e40, 0x41aebe16, 0x008e3552, 0xc6334bed, 0xf6140881, 0xd983b359,
-	0x21ed2359, 0x99139f5e, 0x80cae8c3, 0x8e0bcdfb, 0x4ca00781, 0x7fa021e1,
-	0x7e32716e, 0x5699ec0f, 0x3efa43fc, 0x187ab3e0, 0x40c5fdf6, 0xf7ed06af,
-	0x7d2918e7, 0x8b2ed74d, 0xd1e7483e, 0x83b5699c, 0xfeceab7e, 0x41dddfd7,
-	0xd1ee1fcb, 0xf3ac0311, 0x497369f6, 0xb7f2d8ee, 0x3e3ba431, 0x772fc310,
-	0x9b9754ef, 0x40e5d57b, 0xbf7cba9f, 0x653ae6d3, 0xf9e1d941, 0xc1b5d282,
-	0x87ba7ad0, 0xd5786bc2, 0x8668fa80, 0x1390ffd3, 0x7a26ade4, 0xc86cf018,
-	0xf80a78fe, 0x9ffd023b, 0x5034f048, 0x31148a36, 0x5f5f03fc, 0xb6cfcd30,
-	0x61b7828f, 0x06a311fc, 0x75ad4cf1, 0x173944f6, 0xd2e27ce0, 0x403c3f7b,
-	0x9668bfe7, 0xdf02bed9, 0xcacb6b78, 0x18449ec1, 0x4dfd6049, 0x8bbec21f,
-	0xf5846bb6, 0xb693353f, 0xac3570a3, 0x89b0fa67, 0x6f801244, 0x69dda85b,
-	0x1bfc4ba4, 0x77776fce, 0xf4c3cb44, 0x359dbb7f, 0xf94e0113, 0xe80fb22f,
-	0x37e851e3, 0xeade4ec6, 0x4bfc7264, 0x463299fb, 0x02b699f8, 0x038d9afe,
-	0xfe3a4afa, 0x0cf97ff5, 0xa5e2fde5, 0x823ee1af, 0xb33e63ce, 0xc80a4dab,
-	0x1e0fc5a7, 0xdf62f7c0, 0x8ad32a76, 0x36d7b6fb, 0xa1d95818, 0xcda9f2c7,
-	0xb8b95f6c, 0x3cc10a57, 0x931759a5, 0x6c2f412a, 0x640dd9d6, 0xf1e35e24,
-	0xb7a6c1f8, 0xf5efc013, 0xf61d2201, 0xc7b3127b, 0xb809adec, 0x135a507f,
-	0xac0cbec0, 0x9043f1bf, 0x6b378b8f, 0x902f603d, 0xcff4367d, 0xc37cde2c,
-	0xe85685c4, 0x4aa4d3e7, 0xb96d13f0, 0xd0543c01, 0x7e6217ce, 0xf4f5c89e,
-	0x6ae5bcbd, 0xd0f1f805, 0x62ff0666, 0xd0077187, 0xd17ff5d1, 0x1ac97f22,
-	0xb93b07e2, 0x089def5b, 0xda6cad7c, 0xe7d61d3e, 0x1ae99983, 0x224bbf6c,
-	0x638bc076, 0x5fbc0a69, 0xe03ec92c, 0x8df586e3, 0x4f76b1b5, 0xc7f9939d,
-	0xa597b32a, 0xaf91580c, 0x6d3e80e6, 0x08f94cde, 0xdef59fc6, 0x0d70eeef,
-	0x6b3495f3, 0xa1532dfd, 0x1e7567ff, 0x7b21bbe0, 0x90b7d366, 0x4c2fe0be,
-	0xe398b5f1, 0x99f2abeb, 0xa4f822c1, 0xeae400b5, 0x05ad15e2, 0x8cec51f6,
-	0x44d93e21, 0x213272f9, 0xf9129da7, 0x1993fc02, 0x63bed54e, 0xb59a7dac,
-	0xc67a8350, 0xedde21e8, 0xb74a99f4, 0xb71fb0c9, 0x6f58c925, 0x7d23d24b,
-	0x77ba7fcb, 0xbce86fe7, 0x2ffa749e, 0x26ccbe80, 0x6bd062de, 0x455ed44a,
-	0x35405acd, 0x136461da, 0xcc89afb3, 0x92eb85fc, 0x31558ec9, 0x125373fb,
-	0x39504fdb, 0x73f405f1, 0x1f3fddee, 0x64b6fc06, 0xec053c7d, 0xcfc5c085,
-	0xb35fe0f4, 0xdf284bf6, 0x011f1ead, 0xcff409ba, 0x868a0b24, 0xc3c072e5,
-	0xbcfc46f4, 0x98e924e6, 0xb145751c, 0x82974a9f, 0x41076ee5, 0xd4b8da7a,
-	0x46fef68c, 0x4004c857, 0x2b7cadff, 0xee46a7ec, 0xfb6e340f, 0x740b5785,
-	0xe3ec921e, 0xfe30aca1, 0x17986c18, 0x3e71d2d2, 0xc41796dc, 0x8f4a9ef2,
-	0xb759d696, 0x5ccae3fd, 0xce9f53c0, 0x9eaded03, 0xdf980481, 0x244edb87,
-	0xb61afcc0, 0x0dde7169, 0x16524fa1, 0x09cb0d16, 0x905fc69d, 0x5d827604,
-	0x42f8c2b2, 0xedb87c5e, 0x560594d3, 0x7d403fe6, 0x5e3a3a5a, 0xc9cacecc,
-	0xdff5fdf0, 0x6672eb64, 0x72042197, 0xf9898cf0, 0x33bb45f7, 0xaeffa636,
-	0xcdfe124b, 0x3fd02cde, 0xa2796543, 0xf7c4e406, 0x2efe6ced, 0xf0166f7d,
-	0xba9247e5, 0xb52b259f, 0x52e54424, 0x84894ae3, 0xf33fcca8, 0x20594bdc,
-	0xfedc3fff, 0x0c5d5652, 0x89dff17c, 0x6a498de7, 0xaff09a7f, 0x0ce1f4ba,
-	0x63ceaf18, 0x31cc7e60, 0x3da2abfc, 0xa4fccf59, 0x816b9483, 0x8377c50e,
-	0xd82f660d, 0x18c483bb, 0x5d5b9702, 0x7ad7f73f, 0xd82ef9bd, 0xe3ef88d7,
-	0xf40d5ffa, 0xfa92e144, 0x5827f424, 0x9f28a28a, 0x77fcb4bf, 0x918cf5d1,
-	0x8d9d74ff, 0xc6cd4eb0, 0x0471e1e8, 0x780f43e9, 0x6558b7d3, 0xed2957d0,
-	0xf7a2be8c, 0xe59f706b, 0x814c2732, 0xdd3e80b8, 0x76f9056d, 0x43b9817d,
-	0xb3ef0893, 0x333ed042, 0x0bbf10bd, 0x0ffa3156, 0xc3f410a6, 0x095691a5,
-	0xe676b4fd, 0x20a8cfe7, 0xf8b455f6, 0xe76624b3, 0xbd6789b8, 0x5fd70f36,
-	0xc70738c2, 0x400fd08b, 0xcf2f2047, 0x23a44648, 0x7b425fa9, 0x9de9ab54,
-	0x458efd07, 0xbac52b57, 0x2a1aba72, 0xeae89dff, 0x23c74149, 0x20afcae8,
-	0xa38db95d, 0x23f715d3, 0x127b765f, 0x36bec1f4, 0x2d6be395, 0xfbd13f97,
-	0x2eafc28d, 0x796b7cc1, 0x6b46b57f, 0xc47a0b58, 0xd638fba3, 0xda89bc3f,
-	0x4a7fb0c5, 0x3e9ebb03, 0x57cfb5c7, 0x6448dd70, 0x9608fc00, 0x2fa88dab,
-	0x7244d31f, 0x9d498ec0, 0xe81bbad4, 0x515e7523, 0x0bee3b49, 0x17a01c33,
-	0x7fa2d740, 0x1f34e974, 0x1c5823b3, 0x8f533a28, 0x07969cfb, 0x8ecc7d2b,
-	0x097e41a8, 0xa02936ac, 0xe7f5a707, 0x08fa072c, 0x031e232c, 0x86cf71d2,
-	0x9dcfe045, 0xac80f56d, 0xb225f113, 0x9d77cd52, 0x05538b12, 0x0f18226f,
-	0x0d338e1b, 0xe821f96c, 0xf422c6ff, 0x8ff90c9b, 0x8dea09f3, 0xd6438dcb,
-	0xde2136ad, 0xd068fc45, 0x25741146, 0x3fb191fa, 0x7a646892, 0x407ca468,
-	0x054a73ff, 0xa1eb7f11, 0x3cca2e9c, 0x5ff823de, 0x456ca3c4, 0xc8b01cbe,
-	0xbf399c2b, 0x049c4332, 0xb36c77fc, 0x00fd8416, 0x19598dfa, 0x694fcadd,
-	0x50e92028, 0xaaab9ffb, 0xbcca6233, 0xc1f7d0fd, 0x5f573755, 0xa877fa8b,
-	0x7aa6c01e, 0x26bd9459, 0xc355e205, 0x83b532f5, 0xff127d8d, 0x1be6e2be,
-	0x941eaaa8, 0xee7ff8c4, 0xd11f82f4, 0xc5e35444, 0xf5c727c2, 0x5bfda3af,
-	0x383ede15, 0xefe826ee, 0x7e5112a9, 0xe14bd3a0, 0xf753ab5b, 0xdfe52887,
-	0xf78c4143, 0xaf0e537f, 0x6c319d5a, 0xe17b501f, 0xc36549cf, 0xefa3c276,
-	0x495d76d5, 0x3fd8b2c7, 0x15fe83d5, 0x92e03efa, 0xe7890ed0, 0xf49704d7,
-	0x656becd5, 0xe09d7d84, 0x74f5f662, 0x2fba4960, 0x581df941, 0xdf6023e6,
-	0xe9c4bb52, 0xe3e4bb42, 0xfd680753, 0x1f9f59b9, 0xbb40a71e, 0xbec1e67b,
-	0x4651702a, 0xa9d81bf9, 0x6f94490d, 0xaeccfd8c, 0xe31cfaa6, 0x967e8205,
-	0x38fd39d8, 0x97fc0482, 0x32a4fbdd, 0x5a4277a0, 0x6ba36eb3, 0x379703f9,
-	0xfbe1c713, 0x9779f8cd, 0x205f98bb, 0xa1b55850, 0x26dffa00, 0x5617b011,
-	0x594f1e15, 0x63a9fb80, 0xbe630b29, 0x0a7bec6b, 0x53b8d9f1, 0xcb1e2a37,
-	0x7804e1a9, 0x45f9796c, 0x338dc82f, 0x42650921, 0x04ea1c83, 0x41a1b6bb,
-	0x29211603, 0x03bfcd0d, 0xf5731fe3, 0x5f9d3c64, 0x8177d706, 0xa706b79d,
-	0xbfe9bcc2, 0xd1b57d12, 0xc4e508b7, 0x2b46b9c6, 0xeb0a91c6, 0xd83c41ee,
-	0xc3c05ecd, 0x34aac2aa, 0xe665a718, 0x4dc63b74, 0xf5073da8, 0x077e0f2d,
-	0xae0245fd, 0x1aba7d55, 0xa9ca77b0, 0x0a0bf75d, 0x4673a677, 0xf5f2878d,
-	0xe2eeed38, 0x5710acfb, 0xff8e5d1f, 0x174664bf, 0xf82f921d, 0x8ff452ed,
-	0x677f5892, 0x1fb31f76, 0x55e9716f, 0x5c5bf1fe, 0x36bdaecc, 0xe4069918,
-	0xb01e5fb2, 0x201d5d80, 0x5f604fde, 0x65567c4d, 0x9313ae3b, 0x0536ae5f,
-	0xd74666fd, 0x425763c0, 0xee32b5fd, 0xf03c8867, 0x5cf71863, 0x8ab3cba7,
-	0xf2803e70, 0x90214583, 0xfe5cfbc7, 0x96fac2ef, 0xdcf57b73, 0x831637cb,
-	0x5fd8517f, 0x5099cf9d, 0x94da766f, 0x4e406b27, 0x796649fe, 0x6468c603,
-	0xc967ed1a, 0xb71c4ee7, 0x84ea14d3, 0x68f60ff5, 0xeac9beb1, 0xdbf4045f,
-	0x29faeb78, 0x0d608798, 0xd51e8015, 0xd008bab9, 0xa0bedd31, 0xf2e8c51f,
-	0x4f238811, 0x2597ce0b, 0x767117d0, 0x63f034cd, 0x85c5bee1, 0xce2adc7e,
-	0x1529e31f, 0x2b22329c, 0x34917c74, 0xf9bce76c, 0xbc32d9e7, 0xc68ff614,
-	0xd5eefcc8, 0xec04cd73, 0xf448f25c, 0xf8fc06b0, 0x7b0108ae, 0xc257b9b8,
-	0x5f0b9a71, 0xe5fec3d0, 0xdfc65eee, 0xa0dfbe01, 0x78c2cbf8, 0xedc2cb94,
-	0x67460e81, 0x1c787224, 0xb679f9e0, 0x76d0849e, 0x42577e31, 0xc0793396,
-	0xf8f3d3fb, 0x37f73343, 0xf5884d51, 0xcec25cab, 0x5b8ea158, 0x49d771f0,
-	0xf016af11, 0xfca92c5a, 0xc3d9e2e4, 0x183c4fbf, 0x1bfc0e9d, 0x7e05f4a5,
-	0xccd20da7, 0xf3a75e7b, 0xc93650db, 0x9b98a603, 0x04b69392, 0xa45253de,
-	0xfbed2f78, 0x0dd03a64, 0xafc821a9, 0xda957d2d, 0xeb8b2b66, 0xa58c5e60,
-	0x53ea07b5, 0xfd442aef, 0x5993710c, 0x1cb3fdf4, 0xe65669af, 0x08af73c7,
-	0x341c40e6, 0x9eefa0f1, 0x2bfc61d7, 0x4d87e8cc, 0x73636ba5, 0xf82573e2,
-	0xf8a4dcbd, 0x7767e800, 0xf00252ad, 0xc41f7888, 0x0d16670b, 0x3d38e3e7,
-	0x7d2b7792, 0x983976ee, 0x6a40cedf, 0x1f785e00, 0x1fc70eb2, 0xe3079fc1,
-	0x9e0f7c42, 0x32c2d2e7, 0xc0c9fffa, 0xefb8ed96, 0x483e6037, 0xef1bdf6d,
-	0x35adfe80, 0xc78c5e92, 0xd52dd9c6, 0x02beb789, 0xf6783ff4, 0x018796d4,
-	0x7af6dbae, 0xce25ef30, 0x9bfeb91e, 0xb33f3ecc, 0x3f00a2dd, 0x9b72e56c,
-	0x27c88fda, 0x3f6c5dc1, 0x1e476f19, 0x27f7a975, 0xddafe543, 0x05f0648e,
-	0x0b3cb3b7, 0x7c03df21, 0x70d837ff, 0xd7f4013e, 0x13c10dbf, 0x8db20f97,
-	0x8ff483e7, 0xe6f20f9e, 0xe8104b0e, 0x09af7ce1, 0x8f3292fd, 0x45b59d7b,
-	0x7524001f, 0x01cf0e38, 0x72581b79, 0xca1ae7e6, 0x8b0f727f, 0x8f12c923,
-	0x4b4afd33, 0x6bcc5c58, 0x808bff07, 0x774c765b, 0x3e408b7b, 0x713779b2,
-	0xb39351bf, 0x2ef16140, 0x94d43796, 0x7b002e10, 0x87ae55ea, 0x5e2ccc9a,
-	0x87d0e835, 0x26a35d61, 0x185d1fff, 0x93df62d7, 0xd8941a5f, 0x884f56b8,
-	0x0a2775d9, 0x9d3d6135, 0x07d80f67, 0x59ab6eb0, 0x9f286b7c, 0xc7a1bf60,
-	0x5890e2c0, 0x41ccec1e, 0xe22f5939, 0x3f99fb56, 0xa7c79eae, 0xf45acc4e,
-	0x745ca40c, 0xb035ad48, 0xaab0bb3f, 0x0fe8fd12, 0x9f13393c, 0x7ed52bf5,
-	0xa7e045ff, 0x238e1bcf, 0x1d7bff0b, 0xbd99e8f1, 0xd447ec3c, 0x5945fb50,
-	0xbe815729, 0x15f621cc, 0x2095ff20, 0xe9abad5d, 0xc13e83b3, 0x12349768,
-	0xa77239d8, 0xfbeb0ccb, 0xf5068768, 0xe343b054, 0xcf027685, 0x8fccc939,
-	0xf3324d74, 0x0aa5d06b, 0xd9e238c1, 0x0771e3a1, 0xa272dfde, 0x2353c309,
-	0x76a3e7b1, 0x7d3466b9, 0xd0ebfa2d, 0x4fc11ab5, 0xa0d4cd17, 0xde82fbdf,
-	0xc6fd173b, 0x790202ce, 0xd6b61d54, 0x1eac3595, 0x2982e779, 0xebfac3ea,
-	0x12486664, 0x33f209c5, 0xcbe79935, 0x616de1c5, 0x1f1cba97, 0xa90c698f,
-	0x3fc4f5cb, 0xc58f2d21, 0xa7df620f, 0x75f93326, 0xc70e5561, 0xe3f307b7,
-	0x6797fcc4, 0x3269bc30, 0xb33733d9, 0x41d02e6a, 0x7397c42e, 0xabfcc9e0,
-	0x7f082674, 0x092e75ee, 0xde0e23e9, 0x80da300e, 0x3c593abe, 0x3f856ff4,
-	0xe4caee1e, 0xbc1fae14, 0xd65f886e, 0x8f18f5db, 0x493f5cbe, 0x0e5ab25d,
-	0xfebf950d, 0x27db2cfd, 0x9e796a75, 0x50e51d8d, 0xe5cd9d9d, 0x11d9e484,
-	0x6a56f786, 0x3a3cc02f, 0x3f6025b5, 0x8ad5bb4c, 0x6fd968f3, 0xf3703f42,
-	0xd02c81b2, 0x03552de3, 0x89b71005, 0x2b402fc7, 0xdb45f90b, 0xfee8b9d5,
-	0xd884ec03, 0x4b5f3c76, 0xfef5671d, 0xf60cb920, 0xbf762739, 0xb76afa01,
-	0xfd15f509, 0xf00603bf, 0x839cbcb3, 0x3687ccf6, 0x0bb41b7f, 0x9e5bc398,
-	0x85bb01cd, 0xfdcd4dd9, 0x0bb01e86, 0xe2623aeb, 0xd59ff07c, 0x591fb8ea,
-	0x3bff44e9, 0x6fbf56e9, 0xddf714d8, 0x17603888, 0xbd3af3ae, 0x3bf0227f,
-	0x7f983bd5, 0x8351b670, 0x5af50379, 0xb79022cf, 0x7b6a4d67, 0xad8dacfc,
-	0x75a196d7, 0xb5bda0f6, 0xf675cc65, 0xd73ac014, 0xb63f886b, 0x6758669f,
-	0x7c4dbeba, 0x78becf9d, 0xf3ac0175, 0x2eafbbc7, 0xa75e7580, 0xdf02f2eb,
-	0x5bfc39b4, 0x27bf6993, 0x3da1f06f, 0x2f58f225, 0x24f71e97, 0x432bfdab,
-	0xff21ffe5, 0x30fa58ca, 0x5a87043c, 0x4af4ba1f, 0x3a83c806, 0xd5bfe1a3,
-	0xaa37f08b, 0x4068cf1f, 0x3ffec77f, 0x0766ba7f, 0x2d7e81c8, 0xbfa223da,
-	0x0f3fb2fd, 0xeffda1ec, 0x69413db8, 0xb91bfeec, 0x246dd85f, 0x88abf041,
-	0x27b0807d, 0x5bf1e5e3, 0x251f3e7c, 0xbb006f7b, 0x8dfacbe6, 0x633bf81b,
-	0xe76653e8, 0xcc3c936e, 0x7e8bdc6f, 0xf37d96e4, 0x3e27e0ed, 0xe37e621d,
-	0xd18b1796, 0x7a18dc6f, 0x65790c2d, 0xc3b25fa4, 0xdb71a3fe, 0x07c804b1,
-	0xba5cfb10, 0x8c933daf, 0xefdea8f4, 0x489d0e9e, 0x0a01fc80, 0x71e82577,
-	0x07aa2b8b, 0xfba16fba, 0x6c23c83d, 0xa187a391, 0xc11716df, 0x3ed2973c,
-	0xc44ffef5, 0xf4fa3779, 0xf6377728, 0xd790214b, 0x4e7f7a29, 0x9235e806,
-	0x2078c761, 0xc98bb3e7, 0xb294d4de, 0xf7baf8d8, 0xe1e4e4f3, 0x0d81b07c,
-	0x03bf4889, 0x83b5e23a, 0xe360db3c, 0xf9464cf2, 0x8e4dc7f6, 0x630fcb10,
-	0x6218ffed, 0xc8a34276, 0x5849930b, 0x68b5eba6, 0x585df7b6, 0xe1f7906f,
-	0x5b1f7938, 0xbbfb7116, 0x52f51849, 0xca181933, 0x176d8b0f, 0x7887d71f,
-	0xd21faab8, 0x1f80ac5a, 0x07ab4eec, 0xb8f881e0, 0xf6c83eba, 0x961f94eb,
-	0xafd30c96, 0xbf410758, 0x1d0fdc2d, 0x08fe3868, 0x4fa06fd0, 0xd77d83b2,
-	0xdbf461e4, 0x905bf744, 0xefcf1b47, 0x379d57a4, 0x97ff163a, 0xd1f5a8a6,
-	0xe4eff950, 0x453ebd5f, 0xfe62f7cd, 0x343f6fc2, 0xf1897ecf, 0xe2bcdc65,
-	0xfef1a9f7, 0xbccfb176, 0x2738795c, 0x870f2d45, 0x79677fca, 0x2eb43758,
-	0x1d50f2f1, 0xe59bf8cf, 0x5c70ffe1, 0x4f7d99e3, 0x03bec027, 0xa7d878ec,
-	0x63aedcac, 0xfd1413f9, 0xe9e2f1b1, 0xc597ab5a, 0x5ea2b54f, 0xa657871d,
-	0xe33c38f3, 0xd45ed7eb, 0xf335bae2, 0x3ef37138, 0x369a079b, 0x9c631758,
-	0xba7e3e36, 0x0e9eec84, 0x471f154b, 0xce7e026d, 0x753c74bb, 0x8f8b0a75,
-	0x20725852, 0x6f3e216f, 0xa7eb35eb, 0x7598fe49, 0x1ba22aaf, 0xdbe85182,
-	0x33890728, 0x14c6fde6, 0xc6bf5766, 0x7adc8bf3, 0xad608e76, 0xfd85e2cd,
-	0xf2c35b8c, 0xf2e07e9f, 0x18bc826d, 0xfaf1c2a3, 0x4344edf2, 0xae8cf2f1,
-	0xb04ae517, 0x3901ead9, 0xa237fc28, 0x5e3c8bff, 0x3ffad971, 0xfcf7de8e,
-	0x3c7bd30f, 0xf18bf67e, 0xddb8d6fe, 0x151b8a7a, 0xe3a4105f, 0xca5f1023,
-	0x63bf4919, 0x1d1633f5, 0x1df14d1f, 0xfe766149, 0xb857cc14, 0x2963394c,
-	0x3f009e8d, 0x5063d911, 0x7e09afc0, 0xab8fd412, 0xaa3e78d3, 0xe6267ca7,
-	0x2573b369, 0x58ce1ce2, 0x4307e476, 0xc8ecc3eb, 0x9f5cc60f, 0xde47672f,
-	0x087df0ee, 0xd2b27674, 0x1e01e78b, 0x61f851b5, 0x619cf87f, 0xe22e73d4,
-	0xfca5c63c, 0xd1c45f2d, 0x4bff17d5, 0x3a92d472, 0x75f95d96, 0x13cfd1cb,
-	0x763a7fc0, 0xff9e413f, 0x45bc4119, 0x6b6449f7, 0x103b5f8c, 0x197bf961,
-	0xfef15e1c, 0xa1bef83f, 0x999bd521, 0xfc7fdf4a, 0x1248d1ae, 0x652e9ea9,
-	0x67c5b172, 0x4b42b8c5, 0x697fcb2f, 0x8e504659, 0xb4df80b7, 0x3389fc08,
-	0x4f7dd809, 0x2013fd3a, 0xf7d1ee8f, 0x226d41ac, 0x1167dbf8, 0xbdcef3b0,
-	0x9c33cacb, 0x6798c9fe, 0xe3006cb7, 0xceb3dd18, 0xf9561e60, 0x523e9f17,
-	0xa2f08a53, 0x5065c13f, 0x3db9679f, 0xf133c995, 0x6f843d9c, 0x3ff3fa2f,
-	0xdaf9606e, 0x0ed79701, 0x0fe1097e, 0x8c1128b7, 0x61ecb42b, 0x96b95bc6,
-	0x30fc87cd, 0x65a9e903, 0xf831654f, 0xa9af494d, 0xf2ddec18, 0xdf715bdf,
-	0xe983f1f7, 0xcfb12798, 0x7c02afe5, 0x37434ad8, 0x4d9a7d81, 0xf7bb01c7,
-	0x1537dde3, 0xfe42dc03, 0x39bf03ad, 0x4d9d7f1d, 0x462717ed, 0x64bf7796,
-	0x33ee2647, 0x5afeac9b, 0x133aff98, 0x9db82383, 0xfee14f9f, 0x17fe78f2,
-	0xd5aa9f7c, 0xdfa938e0, 0x5c9c6235, 0x3a7585c8, 0x0de637e2, 0x9e1293cb,
-	0xf1701867, 0x99fec73c, 0x97854f2c, 0xbe752ead, 0x37c947e7, 0x253c0094,
-	0x8b57f2a9, 0xe4475967, 0xb2a4940b, 0x5cea9678, 0xb322e5a2, 0x7aed73a7,
-	0x4adb27a4, 0x9454e2c2, 0xbfaec09e, 0x06991a36, 0xbbf2bce7, 0x9e02d7c3,
-	0x20d45ff7, 0x4799e49e, 0x28933e30, 0x56f2f1b1, 0x004e740f, 0xadfd8c7f,
-	0x954960eb, 0xa0157b2e, 0xefa749f4, 0xffe45481, 0xaf1842d6, 0x2c745fea,
-	0x059f72bf, 0x59dd0cfd, 0x795f984d, 0xea833dee, 0x33fc4e7c, 0x3e605648,
-	0x6fdf6e65, 0xdb604e31, 0x279a8d23, 0x15aa44fb, 0x1825a6f9, 0x36398e99,
-	0xce50bad7, 0x1f7efbca, 0xee43bb04, 0x91024194, 0x03579d0e, 0xcb82d3e7,
-	0xc7f5fa09, 0xb035db77, 0x3f3cd95e, 0x7fff7066, 0xbee3f14e, 0x4205c445,
-	0x3749bf2c, 0xc7ec08f0, 0xdf03e5e4, 0xec7ac20c, 0xc05a6871, 0xb68baa7f,
-	0x9f65dfa0, 0xd9acfd05, 0xbe2b797d, 0x2bd9cb41, 0x1b0718ed, 0x6ceee57c,
-	0xf3a7e7cc, 0x3cca3f1c, 0xf9654a1f, 0x8b3ef248, 0xfc99f406, 0xa8c0f104,
-	0x0aa523b2, 0x968a7ee1, 0x07df3f69, 0x8e1e4a7a, 0x0a3f829b, 0xaa4354f4,
-	0xcdd0077f, 0xa5a4b9d0, 0x892e7666, 0x2db5a79f, 0x9c176f7d, 0xfdc2d9f7,
-	0x4ff707b9, 0xbffe859e, 0x7582594e, 0xf960e0b8, 0xb2a42f95, 0xfc48e278,
-	0xd63cc41f, 0x65bf7ddc, 0x02e28d7a, 0x8c7597fa, 0x574ee45e, 0x5f19f80f,
-	0xde63f049, 0x611d75ee, 0xeccdc62d, 0xa35c7f27, 0xd677ecc4, 0xb2d33d33,
-	0xe3cfed93, 0xd29737f7, 0x921ebf2f, 0x0cbf4c33, 0x764eff95, 0xf4e2efcb,
-	0x6fbcdfca, 0x5efdea21, 0xbf12fdbc, 0x8f611bbf, 0x9637f5c7, 0x50f2231d,
-	0x61c786aa, 0xd84db4f6, 0x9e554149, 0x9f95954e, 0xfbaa343b, 0x47649f5f,
-	0x3b79107a, 0x72caed29, 0xfe8fdbc8, 0x4edfa088, 0x3c8915e4, 0xcb1560a2,
-	0x8c6a09f7, 0x4dd12e78, 0x687f30ba, 0x124b091c, 0xf006d7fa, 0xe42a6dfc,
-	0x4fefd111, 0xff62e6a4, 0xa567899b, 0x22a6e516, 0xc826fc01, 0xb802493f,
-	0xc1161b43, 0x7159b778, 0x9fe4133c, 0x033ee124, 0xc7dd39f9, 0x35a756f2,
-	0x3a43b8b0, 0x4e50cfd5, 0x697467cf, 0x3cc7ab9a, 0x22579156, 0x5e044ff2,
-	0xd3be38aa, 0x01ca2c27, 0x54f228b9, 0xe53d99d6, 0x39c11760, 0x1cbf3868,
-	0xbcf3346c, 0x776fd613, 0x4f9e2e63, 0x2979b2fe, 0xf91678f1, 0x7f44fa29,
-	0xe46cbba6, 0x37416739, 0x7089eb31, 0xecc7dc6d, 0x3d06aafc, 0x71b063ce,
-	0x072bfa06, 0xec04351b, 0x037eaa81, 0xf1b8c3a3, 0x93d5ce36, 0x872bf430,
-	0x054f204c, 0xceca5c3d, 0x085beba5, 0x6d83e0fe, 0x524ef33b, 0xd6d43fde,
-	0x9341cf8b, 0x12bdabd4, 0x03cea1cf, 0xb48df5c9, 0x1af95afc, 0x6689b7c8,
-	0x6a849449, 0x96faafd3, 0x60c4f54c, 0x287df472, 0x7be1bedf, 0xba3e3cac,
-	0x9beda245, 0xed623ed3, 0xa9d33681, 0xefff5ed8, 0x57eb41b5, 0x267f7fd0,
-	0x351cf9f1, 0xebf464ee, 0x3f41123c, 0xa57fd712, 0xadba3e4c, 0xdc9fb47a,
-	0x54951f3c, 0x8854fcf3, 0x7b72d0f8, 0xefc6315a, 0x13d944ad, 0x030cfa81,
-	0xe30827b3, 0xccf1f687, 0xf4e46d6f, 0xbf843240, 0xf208206a, 0x81c73dae,
-	0xe7c90fdf, 0xf310863d, 0x8ff1b19b, 0x9e0578be, 0xb679124b, 0x6733d884,
-	0x36f9815f, 0x135af2aa, 0xdb29a73f, 0x7bbce133, 0xc1db8ebb, 0xe6c47cbc,
-	0x04f3885f, 0xddf6a4be, 0x507e1bd1, 0x7674fc04, 0x41f30fef, 0xa7a8ddce,
-	0xe45184fb, 0x933a595a, 0xeb3a836b, 0xb77e894a, 0x016fe6c6, 0x32c77c3a,
-	0x311c3a6f, 0xa9549b9a, 0xc1bc0077, 0xd780b4e7, 0x8e274e64, 0x473e0cd9,
-	0x3c824fb5, 0x1b1376d4, 0x7b2fd937, 0x7f845cf1, 0x851b74b6, 0xf2625dbb,
-	0x88947e9b, 0x92a15576, 0x26c87108, 0xcb55ee7e, 0xcb9688e5, 0x1b6e7f91,
-	0xc1a997c8, 0x13ef4d78, 0x7fe7b05a, 0xbfe2e3cb, 0x9f9f51cd, 0xb83371e8,
-	0x569673c5, 0xcfe802b9, 0x523aaba5, 0xab40e94b, 0xfd7084f7, 0x37186d32,
-	0x772b603e, 0xa5efd00f, 0x42951fec, 0xe67b773e, 0xbe214a8f, 0xdc7a75a7,
-	0x8f7298be, 0x357fd19b, 0x59bc03b4, 0xefc14b5a, 0x97f5b5fb, 0xfa2bfb48,
-	0xf50dfdf2, 0x35706063, 0x7059a319, 0x9359fe6e, 0xffac3b7f, 0x30c7f985,
-	0xfa40fc2e, 0xaf21f7d1, 0xd18ea8e3, 0xe793305d, 0x69ee93e3, 0x0eee9409,
-	0x5e7839e7, 0x1ebf8b0a, 0xa8fcc09e, 0xfcb17e54, 0xe61289d1, 0x66ced621,
-	0x266f62e7, 0xfa018e91, 0x68593a3d, 0x1c8af4fd, 0x796b7fb4, 0x77f4c89e,
-	0x7eb0097c, 0xca8f6fd3, 0xb2c7f720, 0xeb746ee7, 0x3e188194, 0x975149be,
-	0x97542e6f, 0x9751e5bf, 0x97f15dbf, 0x9365b109, 0xe8107bd9, 0xdf8955f5,
-	0xb10d7147, 0xa4ba7f23, 0x935dd820, 0xe7e74a5f, 0xe53e5989, 0xf17ef94f,
-	0xf5820aa5, 0x5b8d3b29, 0xfdcf508d, 0x3f5e5aef, 0xd98c4dd9, 0xea07c44e,
-	0xf3c4a8e9, 0x93185d32, 0xb1ef7b22, 0x6d343f33, 0xecfda7ab, 0x1f20af9d,
-	0xe43558a7, 0xa5ebc09b, 0x04c3b446, 0x289bb45f, 0x963c537d, 0x819a338f,
-	0x9e75dbde, 0xd697d0f5, 0x2f40506c, 0xb1182657, 0xc83fed6f, 0x9b96d7a8,
-	0xcb4ec40c, 0x63371f07, 0x3e265cb9, 0x20a123c8, 0x51e786ce, 0x0ad4279d,
-	0x60eda5f3, 0x160eedbe, 0xeb96d757, 0x7ed3cf51, 0x3e0f5d71, 0x9c1109a1,
-	0xf98ca57f, 0xc1661ca6, 0x7c247477, 0x6be734ff, 0x518486ad, 0x7bb3a58e,
-	0xfed10e39, 0xbf83dfa1, 0xdfa0f6d2, 0x13b950ae, 0x271bcfea, 0xc0a8b9e0,
-	0x592f79d0, 0xda15c003, 0x67e87cb9, 0x3f04f2e7, 0xa542f90b, 0x852bbe5e,
-	0xf8149030, 0x053b050f, 0xfb8204ec, 0xccb71100, 0xd97a8a34, 0x0da6fd0b,
-	0xe0e767b5, 0x56997852, 0x60253585, 0x27f1bca7, 0xe4b1c3a0, 0x931a6145,
-	0xe429e213, 0xc3c316c5, 0x19af6a47, 0xef0a3d6d, 0x9b0cf2c7, 0x84c7ad9d,
-	0xad4be00c, 0xe8064279, 0x478776cd, 0x0b94c5f1, 0xae6a76e9, 0xdb45f013,
-	0x35adf2d1, 0x18e5f2c7, 0xc69854fd, 0xe76d00e4, 0x1ef0a24d, 0xc0192934,
-	0xdb8ca3bf, 0x7cb5c6cc, 0xe9bae3bd, 0x41ddb4b8, 0xb6971d1b, 0x843266db,
-	0x8da30935, 0x78c0a15f, 0xa2971a97, 0x833f911d, 0x93a503af, 0x0ec1f820,
-	0xaf4834da, 0xf2be7833, 0x1e3664c1, 0xffe75429, 0xf8e99be4, 0xcea65f98,
-	0xda51b9f7, 0xfa7a01d4, 0x56c25369, 0x3837cfa0, 0xfcb61cdd, 0x69d83e43,
-	0x382bcc6f, 0x71267284, 0xd1100779, 0xf28bd20c, 0x0bc1c846, 0xa1cac769,
-	0x8de1e54c, 0x0fde7469, 0x079d1ee4, 0x3c721f9d, 0xa5f68f9d, 0x56935bd9,
-	0x417e1236, 0xa06e029f, 0x218be053, 0x5f838d3a, 0xa5b91bd0, 0x37251317,
-	0x9e173b53, 0xa425eec2, 0x2bc5e595, 0xa3f3c399, 0xd8dd3e44, 0x18d1e6ca,
-	0x746fb844, 0xe6f318fc, 0xffe718ee, 0xf735c01e, 0xbef04fca, 0x3f9ee222,
-	0x1477f601, 0xc96979de, 0xc6f07bff, 0xca97f9db, 0xcf8b1f0f, 0xacd2f8c5,
-	0x1e1f989d, 0x7cc56d98, 0x3f3c69f1, 0xc1a0d036, 0x0fdd00b8, 0x85a23ee2,
-	0x97204318, 0x5cbb72a7, 0x45785b9c, 0xe0d6fe62, 0x7d45068b, 0xde7c513f,
-	0xe97982b8, 0xbf2c65c1, 0x6f7ec87c, 0x1f7ed056, 0x9cfc73d2, 0x93317744,
-	0x28f7dded, 0xe689fbea, 0x44fdf513, 0x7121ed0b, 0x32948a6f, 0xdddfbf9c,
-	0xbbfe9043, 0x9f58b96d, 0x88fa65ae, 0xa3e9837c, 0xbaa21cee, 0x399d691f,
-	0x94f31134, 0x46c15e78, 0x6ff83fc8, 0x9a7e0bf2, 0xc2fca926, 0xc9afe543,
-	0xf0e6dc2f, 0x5b3a02ef, 0x92cde458, 0xebd63d28, 0xd2987f99, 0x8108a6eb,
-	0x7cd6c574, 0x44dda7d8, 0xe4d2df5a, 0x02febd21, 0xa53275e9, 0xbd153cd7,
-	0x15fc61ee, 0xe82d2144, 0x0b4e8875, 0xfd00f3e3, 0x6edc60fb, 0x5befef47,
-	0x6fd35f60, 0x683cb0f0, 0x2f19d796, 0x59e0621f, 0x5c783320, 0xf3c22d5a,
-	0x0f13f43a, 0x4df0e5cf, 0x12a69d2c, 0xf1631fc6, 0x824caa4f, 0xfe6192b6,
-	0x6ffd9931, 0x7c43b8c1, 0xcfdb08f4, 0x6b5b808e, 0x739a7a45, 0x057f8b07,
-	0x802ecc2c, 0x1d1a5838, 0x7f1f267f, 0xdaafa74e, 0x4a66ed01, 0xfa610f0c,
-	0x167f850f, 0xdfd99faf, 0xb370798c, 0x63c775aa, 0x2f2120ed, 0x2e6ddc45,
-	0x7dab7f6f, 0xd2f20ea6, 0xe3aad767, 0x64ef735d, 0xb339b6f1, 0x25ccfdd5,
-	0x7cc13fab, 0x03aad24d, 0x53bdcdfc, 0xda49ff5d, 0x026c9c50, 0x710ec9c4,
-	0xe520d03f, 0xd7a3e013, 0xba6f1793, 0x84f9d287, 0x8095149f, 0x9486f0df,
-	0xd04f6dc6, 0x271bb3f2, 0x94f5f961, 0x28ff7eef, 0xc0296fd4, 0xe25c3572,
-	0xe056fb04, 0x8567ca43, 0xc8cc77e5, 0xc27d0049, 0xe087bdfb, 0xdfd9b77b,
-	0x73b6933d, 0x3cc5c94f, 0xd7ee6ad6, 0xeac85c18, 0xc6d2be6f, 0x52ef9552,
-	0x6d5c5fd0, 0x1d35f766, 0x04bb7e29, 0x73abaaf2, 0xd5e4b979, 0x243e5049,
-	0x3af7827d, 0xcab66b9c, 0xe92d0eb0, 0xb93ecfcc, 0xa44f0a50, 0xf276a978,
-	0xbcd99bfe, 0x4b9e4b6a, 0xaea93e07, 0xf64cfd62, 0x41e67654, 0x2c79cd3b,
-	0x26374b9f, 0xbf05fe00, 0x957df0e5, 0x5c7d2bb0, 0x3de4bc4e, 0xfb4491d6,
-	0x0f2519f5, 0x7157d14c, 0x664bdd8c, 0x7d03e765, 0xfc191cde, 0x2cbcd3f4,
-	0xb8cab6ef, 0xe1e40d3c, 0x297d7e2d, 0x2c6ecbcc, 0x1179043e, 0x65951589,
-	0x246da798, 0xfe94beb8, 0x3f03a7c7, 0x5649fd5e, 0x559d1002, 0xbe82ff4d,
-	0xafba0a66, 0xe537d356, 0x65e9c9db, 0x2adf9697, 0xd30d36fa, 0x3ef658f7,
-	0xe102ab85, 0xaf5a86fa, 0xc7138d0d, 0x8ee3f19f, 0x2fe03725, 0xc30efe56,
-	0x987c8bd7, 0x798dd901, 0x825da7c0, 0x38026f4f, 0x9e089af4, 0x3c96ca8f,
-	0x7180f093, 0x7a88c785, 0x055f8e2f, 0x33e0997c, 0x1709192f, 0x6ec2c9fc,
-	0xf02e7f65, 0x7af064a3, 0x38979dfa, 0xe3a2e187, 0x7a0e91df, 0xcf0611fc,
-	0xc995a966, 0x112fbe19, 0x311697fe, 0x7cf53edf, 0x1eeccdcb, 0xcbf83703,
-	0x3c527630, 0xcbee0869, 0x9f310758, 0xb3e7d700, 0x9e9b3e8d, 0x4736edce,
-	0xedcfd23d, 0x283aa354, 0xff74c25e, 0xd41e700f, 0x7ec1f704, 0x62f1216f,
-	0x47d29cfc, 0x6ec63d20, 0xe3c6f012, 0xb90c65a9, 0x789f3f1a, 0x5baf0cfc,
-	0xe29e0d24, 0x7cd0e1fc, 0xf19e732f, 0xaf4b8af6, 0xb93a5bf6, 0xec39d17f,
-	0xfa842c4f, 0xa0f6625a, 0xe123d13f, 0xda96af7e, 0x6ba7201f, 0x71fa086b,
-	0xfa0d569c, 0x321d8513, 0xff5c9f16, 0x6ab7264d, 0xf73f089b, 0x4f17e6c8,
-	0xe064a98f, 0x1ad6787e, 0x800b0d95, 0xaaac1bff, 0x56b50673, 0x4e788f16,
-	0x503211c8, 0xa87f7a06, 0x0fef423c, 0x8a1c8194, 0xf6ae7fbf, 0x3b7bf322,
-	0xacf84a2f, 0x032b1cf5, 0x19acefbd, 0x56790328, 0x14fef767, 0x13dc55d6,
-	0xbdcf8f19, 0x97911ae9, 0x1a745972, 0x0e2247cf, 0x7fe6c47a, 0x3fc63d39,
-	0xa08a5675, 0xcbb5759f, 0xcfe7e7ce, 0xd8767a01, 0xefc12a73, 0xaad8db34,
-	0xd138bb03, 0xce903fe1, 0x5f17e8e4, 0x9a17e6c0, 0x56de3c52, 0x66587fed,
-	0xee1e22c3, 0x81b878e5, 0x9bf3d9eb, 0xa90fb8b4, 0x0d3e16f6, 0x9bc0a0a1,
-	0xbe42123a, 0x147ea2f5, 0xa79dc6f7, 0xda185506, 0x7d436f3f, 0xf557f8bb,
-	0xb09b2718, 0x1894435e, 0x6431397d, 0x327fdd56, 0x5553a779, 0x5d37a2be,
-	0xbecafed5, 0x717d555c, 0xfeaa9278, 0x544b37aa, 0x54c8b2e5, 0xdfabfb55,
-	0xaf9552a9, 0x6aa19819, 0x3df403bf, 0x4e37e3c5, 0xffbd52cf, 0x37f4e368,
-	0x5d7d3e21, 0xefaa3bf4, 0x043f704f, 0x85237a09, 0x040bfe74, 0x53ac5ebd,
-	0x9acd4f7d, 0x7c0e54b0, 0xac16fecf, 0x95f77966, 0xfdb16314, 0xdb52ec2d,
-	0x28903713, 0x84b62be6, 0x40984f24, 0xbeba9dde, 0xf107afb1, 0x0f7ba97a,
-	0x6be6b826, 0xc69754c0, 0x22633b51, 0x0d5c8220, 0xf1638379, 0xbfd6a5fb,
-	0xa97fe480, 0xd5b837f5, 0xd4526feb, 0x54296feb, 0xa3cdbfaf, 0x0ac4ff5e,
-	0xbc3bfaf5, 0xaa4ff5ea, 0xb27faf51, 0xa9febd4f, 0x9febd573, 0xffaf57e6,
-	0xbaf506b8, 0xd7aab667, 0x7aa97b3b, 0x4b82735d, 0x74f1f554, 0xc849e820,
-	0xf795bccf, 0xa453dbaa, 0x42e86268, 0x5f02d9d0, 0x8d63e603, 0x35487aef,
-	0x4c7d3c5e, 0xf48f3c20, 0xe547d22b, 0x727f6e38, 0xa97aa0ba, 0xda325c6a,
-	0x73c03719, 0xff6e04ee, 0x33b746fb, 0xd58afc84, 0xe6fbb1eb, 0x08dae4b1,
-	0xd1f7c57d, 0xd82bea63, 0xf7869b47, 0xefd163d1, 0x59ea84bb, 0xfa357c1c,
-	0x33b0eecf, 0x999a0e38, 0x5429ff3d, 0xd1db435d, 0xde141536, 0x743e6177,
-	0x93cd77fc, 0x1df20fd1, 0x7183abd2, 0x7c1124ef, 0x7c5123ce, 0x755d89fa,
-	0xf10165be, 0x645fb9e9, 0xc9a9e009, 0x7a0e5038, 0xa3fcc2ff, 0xee7c63ef,
-	0xdd65d248, 0xe21c7207, 0x3909e33f, 0x49c9e5c5, 0xf2d10388, 0x27f71339,
-	0x8ae2897a, 0xee29e7c1, 0x269bacf7, 0x5a259ea1, 0xd5b1e633, 0x9ea12edd,
-	0xf60ffbaa, 0xf4c71f6c, 0x52e788da, 0x6e2ed781, 0xa13b301f, 0x62dd0e0f,
-	0xadf890fc, 0xec7a8f68, 0x3fb4deb0, 0x47f98716, 0xdbb17f76, 0x25dce0c8,
-	0x89c2b911, 0xdd7106c7, 0x7ce1fd61, 0xe0c8db9b, 0x4623a5db, 0xe264efc0,
-	0x31f0fb47, 0xd63c8a99, 0xefd624ef, 0x17f05cd1, 0x7e6fcd9a, 0xa9f21aab,
-	0xf472e0e5, 0xa88f7fdf, 0xb677f7fd, 0xffbfe84a, 0x3e9b851e, 0x1b8f76dd,
-	0xef28b2f4, 0x1e21b802, 0xfbe8ed00, 0x04ab7754, 0xadafb1fe, 0xb10f3dbf,
-	0xbfb25f76, 0x83087ea1, 0x3d60fe0b, 0x83367f85, 0xd281b7d2, 0x11efb6cb,
-	0xfbc61ff4, 0xa969c76b, 0x31fc8106, 0xc097bb1d, 0xfb67af2d, 0xbb1ec3e2,
-	0x7444cfca, 0x7a47380e, 0xf20e7b29, 0x9cc54fbe, 0x3474a0d3, 0x1fbafdea,
-	0xa47cb065, 0x44c8b6f6, 0xe39e4b88, 0xdb87d771, 0x56b2c4de, 0x265e60f6,
-	0x88e5f7dc, 0xa2ef5ef9, 0x4e7231f5, 0x63efd2b6, 0xeace8de4, 0x1e6bcbc3,
-	0xbc608b69, 0x25efc753, 0x5ee3347b, 0xbfc63fbb, 0x6e38cef2, 0xc4831927,
-	0x69b8429e, 0x4f4eff4f, 0x5a3f4023, 0x762a7cbb, 0xd3706d1f, 0xeef562fe,
-	0x1b1264c5, 0xf6d9587f, 0x88fdc20e, 0x6743f7e4, 0x36127c86, 0x641b7c51,
-	0xdf4d0338, 0xe511b86f, 0xaf76deaf, 0x1aa1ee07, 0xb7067f0b, 0x7e56217c,
-	0xdf8e387e, 0xe7e5c5cf, 0xc9d16d93, 0xdb7b4e30, 0x5d6f0a80, 0xfdf1176d,
-	0xc452369a, 0x7ac43fea, 0xf4828d4d, 0x42d28a73, 0xf27ae204, 0xc1fc0d80,
-	0x10263ed4, 0x8db9d67f, 0xb8306f18, 0xa2e4bc18, 0x9e63e90b, 0x3e00c19d,
-	0x1f4a4cbf, 0xe1d52fef, 0x4cbefafe, 0xefbfb62b, 0x780fe337, 0x29eadf29,
-	0xc37fb41a, 0x61c7867c, 0xf973d3f8, 0x0fbf6449, 0x5d3e80e4, 0xd38538c6,
-	0xf1d70b3e, 0xf027f6cb, 0xcc1137ae, 0x5a67d647, 0x5cb85ed1, 0x6a19dd38,
-	0x8fe3c7bc, 0xffe509e2, 0xf74f1c7d, 0x93fcc83d, 0xf04fddf7, 0x4a59053c,
-	0xe987caff, 0x87971c6a, 0xcf87c4a9, 0x082a36ae, 0x465eb00d, 0xed409fe2,
-	0x8d8bd211, 0x82a7e04d, 0x80ecaf7a, 0xaa2788d4, 0xb9e1335d, 0x1764e2a6,
-	0x6bdae3b0, 0x13c08b3f, 0x2f801162, 0xc109037b, 0xab98bc55, 0xf877c740,
-	0xd7813959, 0xe565cc27, 0xe89f5e44, 0xef4ce563, 0x0035520b, 0xcb471716,
-	0xca6f3ab4, 0x80bc7907, 0xfcf173b0, 0x84cd8d7e, 0x73ab0bcb, 0xdfd43566,
-	0x8b9cf049, 0xaf09ffa8, 0x5f1eb34f, 0x637a0799, 0x0dfbfab6, 0xd6a90f1c,
-	0x30d35de3, 0x17aea6de, 0xeb64acf1, 0xfbf137f9, 0x53fd7522, 0xf59b7bfc,
-	0xd41a647c, 0x7fc7abe7, 0xac5bd79c, 0xca8def2c, 0x037f767e, 0xd78c7faf,
-	0xc61ea09b, 0x5af5642f, 0x6f09df71, 0x18e1c9d7, 0x431e33e2, 0xbf33260c,
-	0x233696f2, 0xbf3c57f2, 0x73f707dd, 0x9bf30d95, 0xf519297d, 0x32fb86de,
-	0x5049dc98, 0x51debc06, 0x77a8a2e4, 0x37cc65da, 0x48f5bad0, 0x972b064f,
-	0x871f9c27, 0xead489e4, 0xe4c64461, 0x9ae8a5f4, 0x9005f012, 0x0ff4596b,
-	0xfbe33ae8, 0x918fe21a, 0x664de973, 0x83e58fe2, 0x39554e05, 0x5574cee5,
-	0x5cecd77b, 0x74b5bd55, 0xcc9eaa92, 0xdc9f2276, 0x5ccbe9cb, 0x17aaa254,
-	0x6d9065f7, 0xb59d9dbc, 0x554fe5d3, 0xa85f3bb5, 0x9f8d0224, 0xa3dc49ba,
-	0x7c8231e6, 0x9b96d7b8, 0xb3f8fc0a, 0x4e440ab6, 0xf627e53b, 0x1ba7f3b4,
-	0x54fa598c, 0xcb10b978, 0x7e583bcf, 0x879b7b7f, 0x9e087395, 0xab6f6faf,
-	0xca2ef2c1, 0x69fcf09f, 0xdb9f179b, 0xcfa15969, 0x2bfda47f, 0xda1e9fb4,
-	0xa19f943f, 0x3373c3fd, 0x3f9e1fed, 0xfd43fda1, 0x942fda06, 0xc170a69f,
-	0x0fda29f3, 0xed31ffbc, 0xb44fca1f, 0xb6bcb0f9, 0x1f962e6d, 0xf3e3f36f,
-	0x7c06b6b1, 0x8ad6d9df, 0x96db47e5, 0xb6e1f3e2, 0xdbdb3e20, 0x2f7d6256,
-	0xf9e793a7, 0x2be7dc79, 0xf103bdd9, 0x219fdfeb, 0x9d2fbb61, 0x154a539f,
-	0x3f2ab97a, 0xfc033fa7, 0xfceabd02, 0xc21fc054, 0x8c786261, 0x0668e387,
-	0x91270fb3, 0x930b72c8, 0x1f07181f, 0x6159e7df, 0xae35fca1, 0x4e7bad95,
-	0xd3eb145f, 0x4778d81a, 0x5c409db9, 0xce519241, 0xbb439b8e, 0xcaa45273,
-	0xd007f2c2, 0x14dc430f, 0x5aece53f, 0x21e64672, 0x5725c00d, 0x331e3d50,
-	0x397c21af, 0xb7809c18, 0x57fde0d1, 0x696d378e, 0xa75fbb2f, 0x6c0c2ba6,
-	0xe2b6f666, 0xb9c63afd, 0x9f4cb0be, 0xef1f9f2e, 0x717498e9, 0x5224dd3a,
-	0x9bf176f9, 0x8ccfa144, 0x31fef526, 0x6a89417d, 0xb8bda67f, 0xd1572886,
-	0xfbd48b7e, 0xbdfe733c, 0x198cefaa, 0xf5eaa90f, 0xfaaa15ae, 0x1e73bbba,
-	0xc73e0371, 0x6199b8b1, 0x210272f5, 0x4fdd85e4, 0x4ce65c20, 0x92738f36,
-	0x605f7ec2, 0x133dff37, 0xd6797fbe, 0x5c65f1ce, 0x09f2fb8d, 0x482c560e,
-	0x0f406a0c, 0x448bfc7d, 0x9e3b7f94, 0x7e9fa0d1, 0x40690922, 0xe6a64cde,
-	0x015fd424, 0xf16b8c37, 0x942d26aa, 0x85a2898b, 0x8a2455f2, 0x7fba3afb,
-	0xf5d264d1, 0x9ffad16b, 0xd9f2d131, 0x2cb3ff4c, 0xfa8c30bf, 0x67af80ba,
-	0xadc7d881, 0xdcfde397, 0x37f44cc6, 0x7625cfa9, 0x874bfdf0, 0x970df989,
-	0xc153ca3b, 0x46373e0e, 0x7dcda83e, 0x14058de2, 0x63b4b6df, 0x1fef14f8,
-	0x9ea33457, 0x94cbcfd7, 0xf75e5abe, 0xd44faa7a, 0xf307937c, 0xcffa5b38,
-	0x6b76e029, 0xff228fc9, 0x3c84e874, 0x9e411253, 0x893d970d, 0x3b1e6624,
-	0x93c9deda, 0x11fa2151, 0x375f326f, 0x4ff95f31, 0x4bc87695, 0xd179e02c,
-	0xf2d2db3b, 0x7f0fc7ab, 0x5074e3ef, 0xa0352248, 0x348b0b5f, 0xe074109e,
-	0x31fcabb5, 0x2f2efca6, 0x4b930b9c, 0xf2c40788, 0xf785d244, 0xd57fc829,
-	0x7c9a3e62, 0x50a21af0, 0x0d6ad8fb, 0x70d16093, 0x75fb84bf, 0xfce5cfbe,
-	0x9c6af667, 0xec259c8f, 0x74e80f26, 0x1bd599f2, 0xacfc3a01, 0xf4d8c75b,
-	0xd0bebab8, 0x2def504a, 0x1487d42a, 0xebcbee09, 0xe5407bc2, 0xc8c9122d,
-	0xb9a63801, 0xdf7e83e7, 0xb63a416b, 0x9fc72fac, 0xe359b830, 0x0efc40af,
-	0xc2357b28, 0x9aeda2e8, 0x82b7eb27, 0xf001393d, 0xdcbc0562, 0x430d5f91,
-	0x1e2217e7, 0x2f79f217, 0xc8e8f3e4, 0x833fc21c, 0x70bc7887, 0x6ea2ef1f,
-	0xcf528fe1, 0xaad2f1f3, 0xa2bdc36f, 0xff2d11ed, 0x3e352299, 0x5322e957,
-	0x70c34be6, 0x66173851, 0xb8015c82, 0xd80f82af, 0x919f9afc, 0x941cc6c8,
-	0x6f68356b, 0x3f306994, 0x9b2e9e3d, 0x8fdc9932, 0x7dd9d866, 0x4853eee4,
-	0x93e5c3cf, 0xc2482c6f, 0x5bb333fd, 0x8fcb326c, 0x58957af4, 0xe12af7bf,
-	0x72e7e45f, 0xa1de1ccc, 0xb127057b, 0x892b60bc, 0xb4bc87ac, 0x2bf5f6b1,
-	0xdc707332, 0xb53d7de1, 0xa53f205d, 0x5c7988cc, 0xa13e44ab, 0x69995472,
-	0x57384f63, 0xfa74e465, 0xf79d4da8, 0x6fcf9db3, 0x418f5f3b, 0xf27bc8a3,
-	0x9cc716d6, 0xafeba9f3, 0x88963f47, 0xff720ed3, 0x1d59a0e1, 0xa4e46d57,
-	0xaba87830, 0xc1f10cca, 0x6da7162e, 0xdd99bfec, 0xc7efbb6b, 0xed302f78,
-	0xa87a0153, 0x57ebede7, 0x0b58fdaa, 0x5f91fa77, 0xf164fde3, 0x398a317e,
-	0xe31fec3d, 0x335b62fd, 0x43c27ef9, 0x7b0e218a, 0x61de7562, 0x7277ec33,
-	0x1f0f9e08, 0xef017da7, 0x81bba6dd, 0x974fb82e, 0xa3fbb114, 0x54ffd7e2,
-	0xb2f11e96, 0x78efac53, 0x3ba5da2b, 0xd81c98cb, 0x2dfce079, 0x2b3f69e3,
-	0xf9d52473, 0x3a399580, 0x29b7a75c, 0x97b3c37d, 0xeed19a90, 0xa9943b29,
-	0xef726af9, 0xc1eff55a, 0x1c0df734, 0xff2828b6, 0x1fba035e, 0x4279fc3c,
-	0x1451f211, 0x08c4bf7f, 0xc19930c2, 0x76b3e70d, 0x17993e6b, 0x676f0f4b,
-	0x36ff58ca, 0x0d2f8ba7, 0xae1ab557, 0xa56f45b3, 0xfd7060cc, 0xb9c6e40e,
-	0x5894f1f0, 0xb5c0467b, 0x03df8c7b, 0xe2abf0f8, 0x1fad42a9, 0xfa74f062,
-	0x6ed3c3bf, 0xfcf0e8fd, 0xb3f3c395, 0x9b5eec43, 0x515ff591, 0xe1ab759f,
-	0x647cfb3d, 0x0a49880e, 0x7f115fef, 0x182993ee, 0xebf8e613, 0x59f4e52d,
-	0x078fe5ca, 0xc09150cf, 0x1e63577b, 0x924caf66, 0xbe5ca16a, 0x2cf77f00,
-	0x02c3ef93, 0xbf9e3f1a, 0x4619ef21, 0x64d77f95, 0x9ddeba31, 0x878a8d2e,
-	0xcf362cd2, 0xb2ea4703, 0xd8f1bfc1, 0x7202063b, 0xbfcf3361, 0x6bdecc7e,
-	0x05a67b84, 0x425ca11e, 0x747d019f, 0xc7bc2811, 0x2a333f4a, 0xd3c651d6,
-	0xc6d6f1b0, 0x4f188df1, 0x1564a73c, 0x3a557b32, 0x387385a4, 0x0b7daf6b,
-	0x5b5b7fef, 0xfdeca32a, 0x1d5ff8d2, 0x5bf0ff87, 0x7a30b729, 0xe1459299,
-	0x90fe916b, 0x0e5a6df0, 0x2a7fd148, 0xbd157c82, 0xa01fe71f, 0x4691ec78,
-	0x8b2d29e2, 0x9f988bd1, 0xdb80bf98, 0x5c02dd76, 0x06bbdb07, 0xbca51a54,
-	0x8917d0bd, 0xbcc1ff5c, 0x2b5c5f50, 0x654c73b3, 0xdafbae32, 0xee78a98a,
-	0x17cf376c, 0x1fa35e89, 0x164477f5, 0x763dbc70, 0xb811b7f1, 0xafd83947,
-	0x883ffbc3, 0x15bee03c, 0x8dff1fee, 0x5389f78c, 0xfb81aa7a, 0x391c0ecc,
-	0xebfb009f, 0x843a59f9, 0x87973e7b, 0x35b51783, 0xc8ec1e78, 0x0c6d7667,
-	0x6965d7fd, 0x89127db9, 0x35af39c0, 0x8b3cec25, 0xd603db95, 0x001b2723,
-	0x43c56b7e, 0xde862906, 0x10196566, 0x68fa35ae, 0x17f6878a, 0x6125a7d8,
-	0x7bc1ffe6, 0xb3ce8719, 0x5a1e19da, 0xbda10f4a, 0xf767ed60, 0x2965d635,
-	0xb852ce4c, 0xe6f7d2f7, 0xebd99f89, 0x8e94bea1, 0xbdfc3b97, 0xd3d6cecd,
-	0x4beec65c, 0x3fed7b5a, 0xc83ee1db, 0x471df844, 0x79f2efd8, 0x7292b80a,
-	0x48dfbc35, 0xcbf81724, 0x5abe632e, 0x235ef86f, 0x2f82fbd8, 0x62d5cade,
-	0x39f947bb, 0x0a2b4789, 0x4cae7043, 0xdb35b1d0, 0xcc1640ff, 0x0bc5f28f,
-	0x7c44ef68, 0xf63f10d3, 0xdf33c862, 0x32e64525, 0x076f443b, 0x68d42c3e,
-	0xe116fc54, 0x549e26eb, 0x73dda3fd, 0xa15da73f, 0x46423bf7, 0xfe4de702,
-	0x22667178, 0x191da7d8, 0x1af3dec2, 0x259b5f01, 0x8c0e625f, 0xdc5a2ff3,
-	0x72381e0f, 0xedc601bc, 0xbe02f3a0, 0xeb75f87d, 0x3a53b06a, 0x53e45eec,
-	0xd0ecbe31, 0xfd60f5f0, 0xdf7bd6ec, 0xd4647f04, 0x3acdeec1, 0x11867538,
-	0xd3b69fe8, 0xa07f3f40, 0x04f0f7fb, 0xfd1aa7e8, 0xb3ed0b06, 0x8b77c3a6,
-	0xb011ff88, 0x6b75176f, 0x3c83f755, 0xc2c5e5cc, 0x8e12168b, 0xac2c2fd9,
-	0x6b9e0ef8, 0x0131785c, 0xcfcc3fdf, 0xcfcc3fed, 0xf8e2edbd, 0x5f3f9978,
-	0xfb8afacf, 0xde9c4f6f, 0x8eddfe4a, 0xbbf7c63a, 0xa59afd60, 0xfaa83d01,
-	0xc73f5335, 0x687f64f3, 0x21b093b3, 0xf311de06, 0x98e1224c, 0x5dda8771,
-	0x52709134, 0xfa32faec, 0x15af9e1d, 0xe6d0ffeb, 0xdd8e3c46, 0x1e1538ff,
-	0x53cffb87, 0xff6471e1, 0x87ff5805, 0xf44bc2b6, 0xfe8c793f, 0x0ff05473,
-	0xef8f9bf7, 0x7bac1dcf, 0xeef942d6, 0xc6c57860, 0xf7e14b57, 0x7bf80cf7,
-	0xb7afa41b, 0xeeb9cf0a, 0xfa0e7822, 0x7a7ffd81, 0x1f52f21f, 0xc0f7aad8,
-	0xe8ba8318, 0x7a28cf3c, 0x83d89f26, 0x789cef70, 0x87959dbe, 0xdeff1ceb,
-	0x90ec8728, 0x942c6a67, 0x8ce7a0ed, 0x015a1224, 0x235297fb, 0xdf1139ca,
-	0x34fefd12, 0xb392ab53, 0x46a17ee2, 0x68d87f9e, 0x26aff161, 0xac2cffab,
-	0x574d12ff, 0x1f68cfcb, 0xf03b0ba7, 0x0e213b7c, 0xf888d7dc, 0xc5fb0c8e,
-	0xf97d703c, 0x9b0b9c08, 0x0cffe397, 0x1509fbbe, 0xd1ef102b, 0x0fcdb15e,
-	0xf38f79f9, 0xa6e3e47d, 0x2313db88, 0xf2d9753f, 0xba1bb357, 0xecb7e8e2,
-	0x8cc23b77, 0x40d9757e, 0xcfc8dabf, 0x7ce072eb, 0x67bf00e3, 0xb9fb414e,
-	0xde30f4ae, 0xfc275947, 0xf3e32b02, 0x601d3256, 0x54788b4f, 0x8217e402,
-	0xdd86b0dd, 0x616f5853, 0x275ffae5, 0xba17b9e1, 0x8114b21f, 0x65add99c,
-	0x071e22fe, 0x1e61cf3b, 0x02c9ae34, 0x7cf20efc, 0xaffdf397, 0xe7a7bde1,
-	0x3a478e57, 0x0fe5ffa8, 0xddc31ef1, 0x0d9f4ce9, 0x3ea1b3ee, 0xca7837ab,
-	0xddcd5ee1, 0xed6ecce9, 0x2509c395, 0xa3ec7631, 0xa7285519, 0x5e395e3f,
-	0x19271b13, 0xc2e4cd9f, 0x94ffe11a, 0xce70e5a3, 0xf0d2e3ea, 0xdd3ea13f,
-	0x1bdfc263, 0x53fdecd3, 0xbabfde39, 0x63bf80c6, 0xe277b551, 0x5fb0b9ba,
-	0x1f31904c, 0x84d7b35b, 0xc55d9cf0, 0x6f8383ee, 0xef35ee41, 0xcbbf871d,
-	0x62896f56, 0xd9b364de, 0xc1f10053, 0xc0dfbdfa, 0xf1389fdf, 0x902cc4f8,
-	0x9593c783, 0xfb6fbc2c, 0x3a748a71, 0x26fbe3ef, 0x579df7b0, 0xdb6ab9e3,
-	0x347f8b1a, 0x4bd088ff, 0xedcdf7f1, 0xd73e2f4e, 0x6899f807, 0x5e1c80f4,
-	0x675fe438, 0xbfd607f7, 0x24a59d19, 0xf306ffa0, 0xa7edea17, 0xeb1df7f0,
-	0x49dd8fbb, 0x42e93e30, 0xbcfb15fa, 0xb9eb71f8, 0x8faddafe, 0xd5df83ce,
-	0xf8e76fab, 0x59f7bfe7, 0xdfc629af, 0x5ff8149b, 0xf31f7713, 0xc5de38f7,
-	0x1911c4f3, 0x76a4b9ef, 0x8ff81645, 0x2037ec4e, 0x33589dbd, 0x1057ef19,
-	0x5853d5e3, 0x8f4f94ed, 0xb029953b, 0x15b20bbe, 0xb676ff36, 0xe9ef157f,
-	0xbdf811f8, 0x2d3ee8ce, 0xda0dafe6, 0xc71009a3, 0x7944ed14, 0x5afd3e68,
-	0xddb7bdfc, 0xdd7007e9, 0xa0115d29, 0x6d2fcd2b, 0xbf03b7a8, 0xf71bbf64,
-	0x82092971, 0x8ef8349f, 0x077bf701, 0x9ed019f7, 0x9d977c1e, 0xef711fcf,
-	0x059a359f, 0x7e06dcf7, 0xdae50e39, 0x0b746660, 0x784dbfb3, 0x51e0e4cf,
-	0x5e3cd5ff, 0xd1efc69c, 0xefbb034c, 0x18533ec2, 0xc4fa3eec, 0x6c9043b8,
-	0xfdfbe373, 0x882fbc16, 0x24f9d93e, 0x7f1b8f69, 0xf1748937, 0xfdf823ef,
-	0x09fe5903, 0xc81fa720, 0xe15bfda3, 0xeed893fb, 0x4affae42, 0x9211598c,
-	0xc74bc7ce, 0xd9fd337e, 0xccfa5ef8, 0xa80f7ecd, 0xb047d78b, 0x5ff0603e,
-	0xbdf8f38d, 0x328cf48d, 0x5f7aafcf, 0x49d97de4, 0x6e028eb8, 0x23b4678a,
-	0x93d2f1e3, 0x029ff6cd, 0x3974f11f, 0x80979eb4, 0x7832fc0f, 0xb63ec0bf,
-	0xea26ab8e, 0x9ce93c99, 0xde32f68c, 0x27931430, 0x07df7cb8, 0x3a839748,
-	0x97a0d3ef, 0x847547a2, 0x2d48c3dd, 0x5457f003, 0x16f576b0, 0x7010f7e6,
-	0x07e7e19c, 0x1e593b1a, 0x3ee799e1, 0x856f9ac8, 0xa81ff3f3, 0xff0bcfce,
-	0x0124ed21, 0x8f5633fc, 0xc4575092, 0xc22d76ec, 0x6e8f7ec5, 0xdfc14e8d,
-	0x3e3e0c0b, 0x2712fd11, 0xbc5ecaf4, 0x15d57607, 0x6d27a01a, 0x4fbf9731,
-	0xfb8979b0, 0x6d3dc4dd, 0xc81978f1, 0x99b2fa66, 0x3b82eff8, 0x25138ffe,
-	0xf14b0785, 0xff744abe, 0x52cd206b, 0x7e589af6, 0x9185ea3b, 0x2fea42f7,
-	0xff827bf1, 0xb053e5bb, 0x9f806556, 0xd5e80260, 0x7fb676d3, 0x40225bc4,
-	0x3cd96bbf, 0xb803e03b, 0x4ef882ff, 0x5bc45e83, 0x4e1e2825, 0x9e3eac4b,
-	0x1bbc84ce, 0x1ba00f81, 0xa3be17e8, 0x9d9e7f7d, 0x763ff6c3, 0x17943f27,
-	0xaa5e43d4, 0x490157d0, 0x0f7dc0d6, 0x024a1d27, 0xcec9e5d0, 0xc872e73c,
-	0x292871f7, 0xe076f6b1, 0x0e7bc110, 0x73ff3814, 0x922efc35, 0x05f80a77,
-	0xfed53b77, 0x5e787888, 0xfd401ca8, 0xc6985ff3, 0x800053c5, 0x00008000,
-	0x00088b1f, 0x00000000, 0x7db5ff00, 0xd554780b, 0x733effb5, 0x79332666,
-	0x84841e4e, 0xe4249840, 0x09308401, 0x0741410f, 0x68151048, 0x85280978,
-	0x42100793, 0x17b6881e, 0x240cdb5b, 0x41b45a20, 0x768bd151, 0xb4544140,
-	0x03414141, 0x58a50077, 0x56d56351, 0x880dcb6d, 0xa8311fbc, 0xadadff97,
-	0xfb5bf5ff, 0x90ce649c, 0xf9b7b5a8, 0x67d9d83e, 0x7b5ad7bf, 0x3bdaf5ed,
-	0x3f437cdf, 0x756109d7, 0x10f4422b, 0x116dce22, 0xa3109862, 0x42f382dc,
-	0x11c885d8, 0xca8df3fc, 0x5c3adb89, 0x8df88588, 0xdaf9aaaa, 0x2bc89eb5,
-	0x1f5c2deb, 0x774675e3, 0xb5f1bdf1, 0x28f250ff, 0x084c21b3, 0x5d3dfe87,
-	0x1e310f88, 0x90ea7b8d, 0x460ca7dd, 0x09ac2e1a, 0x75ac5442, 0xa51a45fa,
-	0xbacc4e6f, 0x4285e653, 0x5c6cc775, 0xe34ad899, 0xca2a6f96, 0x1fb29112,
-	0xd0aaf341, 0xea9e55e7, 0x0a8752cd, 0xeaa8f6d1, 0xebf684da, 0x6a8f9e55,
-	0xa51eb8f3, 0xdbd627ef, 0x9fa9cb5c, 0x273e7d0a, 0xc5d16b7a, 0x0ab794b9,
-	0xf280bdab, 0x45da2d56, 0x54782efd, 0xb177f62d, 0x81f7aa3e, 0xf80ba0b5,
-	0x3a894d60, 0x1ea8327c, 0xe39469d6, 0x7268f7bf, 0xc2fcd157, 0x63cc77e9,
-	0xd1f7e2a3, 0xd1f44efc, 0xfc7f21e6, 0x82b13093, 0x45daeaf2, 0x2bdceed1,
-	0xa1c27de1, 0x01727b45, 0x031eb95f, 0x18e3a19e, 0x7808bcf0, 0xbabd20c6,
-	0xabf04bc5, 0xa0f5487d, 0x4be6bece, 0x98df80d1, 0xae47453d, 0x61b5f7c1,
-	0xecda8c22, 0xcefe9c3b, 0x8b8f34ad, 0x3d4155ab, 0x193dd28a, 0xdbc68289,
-	0x2e7cf96e, 0x4dbf73e0, 0xd2917acc, 0x47a7b7d2, 0x46fd285b, 0x21f51fa7,
-	0x6a352709, 0xae7cf47a, 0x98b93edf, 0x9edcc7f2, 0x7aa082c4, 0x2ce9d63f,
-	0x6b655f14, 0x718d16ff, 0x78d8d62a, 0x2e5e065d, 0xbf341d62, 0xfe118d8b,
-	0x8b9704e5, 0x5fb8dbbd, 0xbf464f03, 0x4183c015, 0xa56f544f, 0xe38fa5db,
-	0x114717b3, 0xe1b4d35c, 0x64e82e9e, 0x2e3483c1, 0xe51f5bfa, 0xff7de675,
-	0x74780d71, 0x25969be0, 0x8f03fc0c, 0xbc6da44f, 0xde59be97, 0x93d10ab3,
-	0x7d78d0e0, 0xcbdf42aa, 0x850984f6, 0xda532bfa, 0x9c09288e, 0xac14fb77,
-	0x8c3cf17f, 0x9871f657, 0xf7c7e505, 0xf3c79f5e, 0xc12bc10a, 0x7a2bb529,
-	0x96d698bf, 0xdf8209ea, 0x736d3ec5, 0x7d06be79, 0xe79bce74, 0x4c37bb51,
-	0x4c5c5f60, 0x76467c23, 0xf801b1c2, 0x5df5c619, 0x6f6fa676, 0xb1d7e01e,
-	0x7ac8575e, 0xfdeb215d, 0x0b7d3040, 0x29ebc68f, 0x82cc24ff, 0xdc0fe5ef,
-	0x71a6e594, 0x8e3bdf8e, 0xce3c75d7, 0x75fd879b, 0xcffa953c, 0xe59d72bd,
-	0x733ad00f, 0x8d9d65bf, 0xb757c64e, 0x7b6b8ceb, 0x3acb7c42, 0x6874ea37,
-	0xab33f3ac, 0xfa8ada3b, 0x9cb155bb, 0x14fb6a8a, 0xcc8d7fdf, 0xd0d056bb,
-	0x0f4936b5, 0xfc236bb5, 0x6685d7c0, 0x6e7f04db, 0xf1a01f27, 0x583d27be,
-	0x8f8e1e98, 0x023c3f75, 0xea9f75f4, 0x9701b9f2, 0x9cfcef21, 0x57efc7f2,
-	0xb1f9025d, 0x0fc47e12, 0xc70fe02c, 0x73278b53, 0xb5cdaf7e, 0xb4f9fa82,
-	0x047f6ff1, 0x63dc5cfd, 0x5f5e0b73, 0x90b3fdf1, 0xaf82f9a7, 0xc66e5c11,
-	0xebce54b8, 0xd619ef57, 0xe8f17288, 0xbba65760, 0x0214be0b, 0xaa358ae7,
-	0x01d21f69, 0x3ed5e3c1, 0x3ac6e290, 0x8713380c, 0xa83a9acd, 0x4fc81e13,
-	0x9709d41f, 0x9ad0bb5a, 0xfb12fbf8, 0xfc414194, 0x9749f00c, 0x3cff44e7,
-	0xa2d2c7c9, 0xc873f683, 0x8ff942fc, 0xff48cf51, 0xcc57c1d2, 0x705178fc,
-	0x1950e09e, 0xc21c5f92, 0xca42aa37, 0xb7ca43ab, 0xf99cfaf7, 0x13f8e840,
-	0x31bee4d3, 0xc3aa58e0, 0x9145bb71, 0xc53ee47c, 0x2d7e89bf, 0x4bedbab5,
-	0x8e2ffe69, 0x4fd0f311, 0xae385599, 0xced97de5, 0x8ab52beb, 0x7c02b086,
-	0x633d70f7, 0x435fd4dd, 0xc3e51c58, 0x7aa21f25, 0x7941ec13, 0xf31adf83,
-	0xf0934f09, 0x5bc5d230, 0x83c78d9d, 0x14dd59e0, 0xeed7ca6b, 0xee3c6e4a,
-	0xc62fcce8, 0x6ff4c92f, 0x387ead22, 0xaa7f22e0, 0x8c1eb577, 0xb249fa20,
-	0xd469e168, 0xff83c5ef, 0x66eb9d1b, 0x262f0fbc, 0xe9a816fc, 0xf5a61d2f,
-	0x3d56edb6, 0x9befd09b, 0x5f11fcf2, 0x1b787a5f, 0x9bd9af7d, 0x7775ee21,
-	0x8e143fae, 0x8a5d7717, 0x17efa74e, 0x05c3d90e, 0xcda501c9, 0xd1ed63f1,
-	0x84babfbc, 0xbb875bbb, 0x6b05dfd1, 0xa094f46b, 0x6b44177a, 0x7a20d4f4,
-	0xa975dd29, 0xfc31e44e, 0x1f106a7c, 0x8f4f74ff, 0x2f7d2ab1, 0xb1af7dfb,
-	0xe9c74a16, 0x736fdefd, 0xe686b93f, 0xe61ddbed, 0xbef34cd9, 0x0b2ce6f0,
-	0xb3785fda, 0xea7f4f42, 0x4fb3f4e5, 0xb47e3153, 0x31bbd245, 0x293488de,
-	0x8e59954f, 0xfc1a313e, 0x699ed5ff, 0xe59d69f5, 0x2c829665, 0xad9b79e0,
-	0x7de62e6d, 0x95ab1141, 0xc67eceb8, 0xfdb9b9a5, 0x9f27dd85, 0xf4f87f00,
-	0x60053efe, 0x6776172b, 0x7e5469e7, 0x5921e3e1, 0xc2f7ea2e, 0xf01ec97d,
-	0xf7366d85, 0xeede994f, 0xdf60f289, 0x9c61fd1b, 0xf77fe825, 0xa435c355,
-	0x52f9cb1f, 0xe3934f3e, 0xce8294fa, 0xee2da37e, 0xbf028f5f, 0xb3cdbdf8,
-	0x7fa59299, 0x8b19e8cf, 0x773f61f5, 0xd5b28781, 0xe26dc261, 0xde782b27,
-	0x8763c2a5, 0x1172841c, 0xa2e55f44, 0x6fcfbf98, 0x405f7f34, 0x17df027c,
-	0xaf7f37ae, 0x5aab8d10, 0xfc8b7d69, 0xf682efe6, 0xfb112f8f, 0xe269f8da,
-	0xd6f17ef3, 0xf54cc26f, 0x0fe74f84, 0xa5c7e60e, 0xc7c11fb4, 0xfefc579e,
-	0x3defc015, 0x7433af2a, 0xd2d3cb5d, 0x448f1d78, 0x6b6e63fc, 0x598f5e10,
-	0xe0893584, 0x1c2ecc7a, 0x47e80549, 0xbeab9c08, 0xcdfe613d, 0xfedee4d4,
-	0x3296a55f, 0xe0b24bdf, 0x05c3b83c, 0xedfd47ce, 0x7e8a9939, 0x791756ca,
-	0x77e6835b, 0xe47de6d1, 0xdf5790e7, 0xf54d7e23, 0x37f58d8e, 0x1d79a58e,
-	0xd4f557bb, 0x33af3177, 0xe3f99f24, 0x28f71e09, 0xf2843fc2, 0x2d4c9ccf,
-	0xde9cbc21, 0x34b5327c, 0x3115fe98, 0x8d1e982b, 0xebc26694, 0xf489ac82,
-	0xeb05ad18, 0x89d7ad09, 0x0d7cf35f, 0xb1553a78, 0x787a2ba4, 0xe54f7414,
-	0x05577f39, 0x3d9acee4, 0x33e83f36, 0x0f17e362, 0x6cfa0adf, 0xda40b9b6,
-	0x2f547bb5, 0x5bb174e4, 0x1ce267f5, 0xba34fe6b, 0xeecce712, 0x68352e21,
-	0x170e74dd, 0xb0b97ce3, 0x596252eb, 0x1933f72e, 0x9eed44f2, 0xdfa03c87,
-	0x5cf1e6ee, 0xf1affa9a, 0xff99af3f, 0x20fdcf9d, 0x81f046f1, 0xc0b2278d,
-	0x3e0f89df, 0x99fd8697, 0x791db5f5, 0x83875a21, 0x2c7e68fe, 0x7ff45fbf,
-	0xa3a5f2c5, 0xbbfaf559, 0x349ec3c0, 0x07ffc33b, 0xcd026fcf, 0x7e73b12f,
-	0xe03d9f34, 0x6b3cc6cb, 0x9c766ddc, 0xd11d17b3, 0xb4a7e079, 0x89f989a0,
-	0x06e4f9fa, 0x289b2d7f, 0xee16bf88, 0x09c2bf9e, 0xf151a179, 0x6f280f40,
-	0x2adcf956, 0xddfaa0df, 0xecc29784, 0x213bf6bb, 0xe5443e9f, 0x3abc74d4,
-	0xa8b38fea, 0x54fbc2fe, 0xf8dbefce, 0x80da3fd3, 0x11360dd7, 0x47863c06,
-	0x63c7d26f, 0x3e916879, 0x37cd45bf, 0xb7a0569d, 0x013d51ec, 0xe51cdfb4,
-	0xd5b2f7c1, 0xf4c163b6, 0x50bf1f35, 0x2bd7f37f, 0xf81a40fe, 0xc2fcb984,
-	0x27ce9f30, 0x5c6fbe42, 0x027f7535, 0x89eb2b52, 0x72e6fc8b, 0xf34ebcfc,
-	0xdf7fd5a9, 0x17a6b99a, 0x29c173f0, 0xabf60b44, 0x1df595b5, 0x054d6811,
-	0xfeec2f1e, 0xac78152c, 0xb27ff57d, 0xebf81744, 0x51cd4fd8, 0x84222709,
-	0xc6e74b38, 0xfdd01637, 0x5dc5c9a5, 0x8fb17fd4, 0x6d5b17dc, 0x63905ebe,
-	0x8afc6ff7, 0xddc5c1f9, 0x17575f5a, 0x5fb9dbf4, 0x124b4e7d, 0x205380d2,
-	0xbae4da1d, 0xe484fb11, 0x1f417bc1, 0xdd4d569b, 0x6be77944, 0xa2424836,
-	0xf7923336, 0xfcc7f60b, 0x7d8d7ea0, 0x017c15b2, 0x1fc930e9, 0xe523ec5e,
-	0xbcbad584, 0xfb5f75b0, 0xe62ecce4, 0x26cd3ab3, 0x923edbcf, 0x2b4dcc6f,
-	0x9c874f0e, 0x0345f161, 0x75ebc21f, 0x157c1027, 0x97eabe9d, 0x3df0512d,
-	0xda723449, 0xfa71345b, 0x245a10b8, 0x0b8f0bea, 0x4fa21670, 0x7bc7e02c,
-	0x31abd79e, 0x8e89fcdf, 0xd06af03b, 0xf8562f83, 0xeaefd337, 0x63508746,
-	0x46b5ed20, 0xa0d451a3, 0x4beebfa9, 0x540fb6e5, 0x3ed49fd6, 0x2e3d3e06,
-	0xc8cbf7e0, 0xf8c131e9, 0x74b877db, 0xdeabfa02, 0xf52e7a49, 0x4d877e77,
-	0x5957a004, 0x3d50bf69, 0xec2fe1db, 0xcd4be069, 0x5cbc808a, 0xaf7c794b,
-	0xfaf5651d, 0x9792e083, 0x9a91e12e, 0xbb70c59e, 0x9a1ef560, 0x9573fa08,
-	0xdbd721da, 0xc04f970e, 0x2a4b6379, 0xfb5e63b5, 0xa4758f0e, 0x56b16f01,
-	0x9aab37de, 0x5c5b718d, 0xf62a3fe8, 0x436f9e03, 0x534445ae, 0xc28f86bb,
-	0x874c0cfc, 0x3a6143e4, 0x85021b5c, 0xf817770e, 0x14c289f1, 0x77ca8231,
-	0xcf3013a8, 0x1752aef3, 0x958b68f0, 0x9b308776, 0x9af40277, 0x78b8d8b0,
-	0x7a446fcc, 0xabffcf06, 0xcf3c25d8, 0x80bc48af, 0x7af241be, 0xbd0df231,
-	0x7d8655cb, 0x8fbc23e3, 0xfc721d6b, 0x9f2a3da8, 0x43a462a3, 0xbbefdbe7,
-	0xc89c68ca, 0xd024dabe, 0xa89f3183, 0xf00baf61, 0x858b1ce7, 0x3786b3e5,
-	0x2f80d722, 0xd21be518, 0xf819bd25, 0x75609958, 0xae3c7f81, 0x574ae7d3,
-	0x6820a3b1, 0x161eb69d, 0x0ec55e1d, 0xbdbb69c0, 0x97ce10f8, 0x738efa36,
-	0x54d27f73, 0xaa14f407, 0x273f4167, 0x64c768ea, 0x0ee9dfa3, 0x424177c0,
-	0x5bb478e9, 0xc2ac9628, 0x5eb85b7e, 0x3e208115, 0xe39360db, 0x211cb82e,
-	0xc73a4302, 0xe3f8405d, 0xf9a397f6, 0xd653837b, 0xfb92886b, 0x2974cee7,
-	0xd3d4ae2f, 0x83fa7ab5, 0xccc7baf9, 0xfec7cfd7, 0xe4a94b71, 0x53a677ef,
-	0xeb4ad5bf, 0xab268878, 0x80edda92, 0x973a89ef, 0xcd058408, 0xc6758af7,
-	0x38d0408b, 0x3b2ef51d, 0x183e2045, 0x47c66e1f, 0xb9237ae7, 0x125d44fc,
-	0xfefbb1c3, 0xec704c53, 0x04c33fec, 0xcffb2bc7, 0x7513f2e2, 0xffd1df39,
-	0x4ffa6ec0, 0xb3bfcd33, 0x5dfc7edf, 0x82fad2ec, 0x22eddcbf, 0xd374c07e,
-	0xbb2676ca, 0x7606fda2, 0x9871f12f, 0x95f7dc80, 0x0576cb53, 0xe96d87f1,
-	0x0b9f5d76, 0xfadf80a4, 0x6b4e3ac4, 0x8f1a5d77, 0x0be26ef6, 0xcbd0e76c,
-	0xcf1b456b, 0xfa02fc13, 0xbab648bd, 0x96977cb9, 0x98c8bd0d, 0xf33c8747,
-	0x859f48bb, 0x9ed841f6, 0x1f6347bf, 0x4db6b45f, 0xa9aa7d86, 0xde088d59,
-	0xfdf407d7, 0x17cfb631, 0xd5d7b079, 0xbdf11da0, 0x9c5dee9f, 0x84d4f80d,
-	0xde61e5b5, 0x2dfef7fb, 0x57c8e70f, 0xc5f7167b, 0x9f54adf7, 0x5b7b0fe5,
-	0xbfa8278d, 0xb3e5c27e, 0x9b4ce88c, 0xfa1ffdf5, 0xfa9eeb7d, 0x36c7985e,
-	0x2e483dd8, 0x56f659ac, 0xb078f1c6, 0xe083ef21, 0x16f8825f, 0xa6bb43eb,
-	0xdf2063a9, 0x0f32487d, 0x96ee87e5, 0x3ed0c372, 0x83496fc2, 0x2ce1f7dc,
-	0x619a89f0, 0xe1541776, 0x9616fcf0, 0x3987c3b7, 0x9f9f385c, 0xebc193ed,
-	0xc84e43b3, 0x78a2fb40, 0xf154e7a6, 0x1b6dc9af, 0xe04ff642, 0x68db350f,
-	0x75b56abc, 0xf78538f2, 0xa9f031d1, 0x78bfb79a, 0x135fd747, 0x8c5a9f81,
-	0x5f78f04b, 0x432127ef, 0x9a7a893b, 0xabbef5a3, 0x9b8cdea8, 0x1fa15393,
-	0x99fae895, 0x19404898, 0x1068fcc9, 0x9e5720ec, 0x7a0f52db, 0xc034d14d,
-	0xf0ec97c1, 0x981afce0, 0x71c91c22, 0xf4fed0d8, 0x57ee34a9, 0x2ec316e9,
-	0x03de60aa, 0xdf3d35f4, 0x2c6969ab, 0x38fe939f, 0x3b3fd1d0, 0xfbc325ae,
-	0xa30bf077, 0xdf3787fe, 0xe2eb483a, 0x79e430dc, 0x36e9bdbb, 0x3aadb3cc,
-	0x9847f592, 0xc9eed0f3, 0x2a02c39b, 0xc8b68aec, 0x3fe7d0d5, 0xb07b988a,
-	0xfee3c107, 0x83222d28, 0x799acdda, 0x95e42ac3, 0xa5eef1fd, 0xd692e7a0,
-	0xd3e7c0e1, 0x83262d4e, 0x6872afc6, 0x8969137d, 0xd968fbe7, 0x8be43831,
-	0x449e25e3, 0x2ee2a0f1, 0x53e72fe7, 0x0ff1c8a2, 0xe8496947, 0xf2d2c4a7,
-	0x66f855c4, 0x837b616d, 0xfdc1e868, 0x8a8bb79c, 0x037fe4ae, 0x75f4470e,
-	0x6b89b3ec, 0xf6fad32f, 0xd4f18dad, 0xefcb7cd3, 0x96b7399e, 0xe296f9d2,
-	0x9a6a80c4, 0x55d61677, 0x9be92be5, 0x79f3f24c, 0x65ef3e9b, 0xaeadbcfa,
-	0x1cfde0ac, 0x437aef3a, 0xc285f95e, 0x50ff20fa, 0xac5f15fe, 0x87ca5eff,
-	0x307d2e59, 0x20d6e70d, 0x3649db0b, 0x22ded384, 0x7d5df23d, 0xbed38f9e,
-	0xf7f1c473, 0x149ef8d5, 0x3d27db2e, 0x7ec3f16c, 0x37763c50, 0x9ac9e9e3,
-	0x634a8f48, 0x1db70895, 0xf0995072, 0xd9fc5cb2, 0x69edbf98, 0x661575a5,
-	0x6e01d768, 0xa92de2f3, 0xb43cf01f, 0x6f205381, 0xf8eb928d, 0xd7937916,
-	0x6cb85531, 0x3589942c, 0x531fc816, 0xf329725d, 0xa63fb915, 0xe30daf09,
-	0xd71a10cd, 0xbb05c3fb, 0x1fc4fa17, 0xbcd10ba0, 0x7f1f0a67, 0x9cfc2d9f,
-	0x5c022ade, 0x95a2c7ff, 0x89bc06f3, 0x4825e63e, 0x53d938fa, 0x8cdff865,
-	0x9117bf79, 0xad1967d7, 0xd923ca63, 0xad5fac99, 0xf9f0c1eb, 0xd14f79ae,
-	0xeff686e9, 0xfd83f43c, 0x99fa9d3b, 0xfec8637a, 0xe061ec2d, 0xf6dbf333,
-	0x877b4b51, 0x4c9914fe, 0x475eb870, 0xc5def5e9, 0xa9153fac, 0xf847c291,
-	0xfaa51969, 0xf21c7721, 0xa0484f2e, 0xb9fddc75, 0xb77e83d4, 0x843dbc5c,
-	0x46377fca, 0xd2dcf515, 0x64d4f2cb, 0xbdc99fbd, 0x9d869fc7, 0x2408b0f5,
-	0x17b9a50c, 0x8f5ed65d, 0x564ef9a1, 0x52c435b7, 0xa4de84f9, 0xbdf104c7,
-	0x5bb6121b, 0xd8ddd7a1, 0x627dfccf, 0x99df59ae, 0xc0551a24, 0x7350f279,
-	0x0f807dbd, 0x0c8ad7d1, 0x0188b7a9, 0xdfee8062, 0x47fbb963, 0x13ed1f7a,
-	0x0be1d92f, 0xbb433579, 0x3a5c7007, 0x18b9b3e9, 0x7ae55857, 0xd951de6a,
-	0xe48c779e, 0xdf9d2f2c, 0x84e8ebc7, 0x08f29308, 0x6e48a7f2, 0xcea67a40,
-	0x3a39e9cd, 0xa17e51e7, 0x67eb23ce, 0x7d803f14, 0x73faba56, 0xb772f02b,
-	0x6ef9c253, 0x761faa67, 0xc6a68ab5, 0xe55e98f1, 0x4883a6ae, 0xe3c503cb,
-	0x382ecc71, 0xd220e4b4, 0xb6f43bbb, 0x5fdd0e25, 0x5dbff3c0, 0xa3dbd3a7,
-	0x8834dea6, 0xbbedc9f6, 0xf6ebdfa5, 0x4da7533e, 0xc6de404a, 0xa8e8eef9,
-	0x3422b2fa, 0xa8cf22da, 0xb758cdde, 0xc1e8f9b7, 0xc9e75a78, 0xff3c11ba,
-	0x9e5e75d3, 0x09bad9ff, 0xa33dfe9c, 0x27ae39f8, 0x6c79673e, 0xd6a3b6d2,
-	0xe45faa14, 0xb7d8bc55, 0xdf857ad7, 0xdeb1744f, 0xf581cf26, 0x1f600e74,
-	0xf534198f, 0xe9303bf1, 0xda276d0c, 0x5171b8cf, 0x3c99c611, 0x7a8ac4a2,
-	0x2216bf33, 0x4e93ad3e, 0x8dee8bbf, 0xf8eb57f5, 0x6157bf3b, 0x1bdf9e78,
-	0xdf6cf0cb, 0xf9031191, 0x8ccee960, 0x6f89489e, 0x046f7a1a, 0xd97ed7e0,
-	0xff6df3c2, 0x8ef59c28, 0x774bf6d0, 0x7a89ec0e, 0x22df0967, 0xfb3cde48,
-	0x83b87ffc, 0x71b395cf, 0x027d5f4d, 0xc957f6fe, 0x39b248df, 0x5ff818f1,
-	0xd01e5eef, 0xce5d05cb, 0x02233d26, 0x6e8d5fe7, 0x427f0457, 0xb4b86cfe,
-	0x217f0ee7, 0x17f62c65, 0x9c1373c6, 0xb9191cc3, 0x7f7087c7, 0xfd467e47,
-	0x9258fcbd, 0xb9effa07, 0x63a48fed, 0xf34dadfc, 0xfa8c793f, 0xf8b7ef3f,
-	0x9d4e746c, 0x5e174d17, 0x2a7e1f05, 0x777bed92, 0x9c2f342b, 0x717b9bc3,
-	0x86b1473e, 0x2c39c32f, 0x73cfbcfc, 0x1975b714, 0x17aaadf1, 0x7a05ed1f,
-	0x30608d7c, 0x5b5fca82, 0xed7cc11b, 0xc8e79b35, 0xb8f7f432, 0xfbe9efec,
-	0x0bb63cef, 0x05d57de9, 0x65fa5277, 0xa1e31c46, 0x034581fc, 0x79ce9ed0,
-	0x3dfd4c91, 0x80128af7, 0xbad06abf, 0x69922b7d, 0x1c37837e, 0x34a2f4b5,
-	0x1ea529ff, 0x373ec0e9, 0xf9fd821e, 0x6e6e196f, 0x9a5b643f, 0xd96d829a,
-	0x75c9ffcb, 0xe59bfe7c, 0x9f75dc82, 0x3a25ed8f, 0x4a0183e5, 0x348d99d3,
-	0x8fd4b0d7, 0x6386340a, 0x6767af23, 0x6ff7b4f3, 0x49075815, 0x8977981e,
-	0x91e7c3dd, 0x7811b7df, 0x78e5af3e, 0xf62bbf58, 0x3b7a0a3d, 0x707a25af,
-	0xfa4cbd3e, 0x7fa8d5fc, 0x7cebcac4, 0xa2f7a9e5, 0x2189df61, 0xbf09d93d,
-	0x78db7e48, 0xe3eeafd4, 0xf587f016, 0x09fae279, 0x8ecd4f80, 0x9fb91b9d,
-	0xfa07872a, 0x4bcec56e, 0x2f205307, 0x993c20de, 0x321dc7a0, 0xaf42abff,
-	0x56a5a547, 0xe652fc6c, 0x5f398a5b, 0xfc27da4c, 0xca4ca2fe, 0xe7e88f49,
-	0x63cd68a0, 0xee24c97e, 0xafd7c4ee, 0xebe518a8, 0xb0c97cd3, 0x27e71b6f,
-	0xfda97b9d, 0xb2ec65b0, 0x5bd8cb7d, 0xdf2e1953, 0xebb3dcf3, 0xdfd197e7,
-	0x73e17623, 0xdf303f52, 0xc1be9ec0, 0xcdebcf2e, 0x2f4067c4, 0xe34d79c6,
-	0xed93f5e6, 0x29afe0bd, 0x076832aa, 0x91e523c1, 0xbe379630, 0x62b3f8ef,
-	0x6df9f156, 0xe1b55bc8, 0xd9f22f92, 0x885fed41, 0x37eeaed2, 0x7932760c,
-	0x3bab0bde, 0xe3c8f217, 0xfa6bde51, 0x96d5bcb1, 0x39d0358a, 0x53e61d7a,
-	0x95fc92a3, 0x457f2411, 0x73af7dc6, 0x2de51034, 0x5beffb42, 0xcd046c7f,
-	0xf1290633, 0x86a468ef, 0x485a45de, 0x7d39fc97, 0xf3f8135b, 0x3f926143,
-	0xbe610d47, 0x7433ac64, 0x07c4039c, 0x6f3be234, 0x11a339d0, 0x3917183f,
-	0x7d78cac6, 0x907552dd, 0x3922e5ce, 0x1ada0802, 0xdef3943b, 0x61638228,
-	0x2eb42aa4, 0x252347f4, 0x3ac7cdbc, 0x984427c7, 0xc42515ea, 0xbf8fb1da,
-	0x1d55faef, 0x3cb86a4f, 0x8370d4bf, 0x7413babf, 0xfac87dbf, 0x776f7ae5,
-	0x3abe630e, 0xeb7ef956, 0xdf15b22e, 0x8b8f3c09, 0x7373e7cc, 0x2394e45c,
-	0xd475e09a, 0x7ae87be1, 0x1c25d743, 0xfa8e4fdf, 0x167c2289, 0xedcfc7ec,
-	0xb66b776c, 0x5bf73eb5, 0xa2f36b82, 0x47ec0f5c, 0x70bed32f, 0xb54e9f80,
-	0x0cdb9cb3, 0x37ea92d9, 0x5c7170f7, 0xdfba6bcb, 0x6f5b37dc, 0xbe7c14ef,
-	0xc5eecf34, 0x615ef47e, 0x48ec1034, 0xd26fd2f5, 0x16f25b6c, 0xe5e6ebce,
-	0x819a1e29, 0x69efc150, 0x97e47ccb, 0x095ebcfc, 0x817f0adc, 0x40bb73ef,
-	0xfeb175fd, 0x5f94e9d5, 0x9e0c8bf7, 0x8fa447cf, 0x8abc62d7, 0xeb5be670,
-	0x71c9bd62, 0xff979f04, 0xb279f2a1, 0x91f29f2e, 0x6ed9d7cc, 0x378a6eb3,
-	0x04ad7e19, 0x36eb6f1d, 0xb05ef2ca, 0x4d3ca293, 0x26c4ffb6, 0xd7a2dfeb,
-	0xfbf1d04b, 0xb4a74eb1, 0x683f99ff, 0xa0ac2393, 0x95fb77ff, 0x46fbc6be,
-	0x17e19378, 0x933cac7a, 0x54b7986d, 0xf4c690de, 0x66d3dba4, 0xe8dcfce9,
-	0xc31c0d17, 0x9fcb4f21, 0x3b37f3d9, 0x2a33df41, 0x1f21479c, 0x22b1547e,
-	0x0cfd7a0a, 0x21840d4d, 0x917a6abe, 0x4bae43b7, 0x395eb8c7, 0x1fa1b96e,
-	0xdf00ca06, 0x710e6dbd, 0x81ffcb2f, 0x96fac121, 0xfa45e781, 0x1a6eadbe,
-	0x7eb060f3, 0xfe27695d, 0x72e51833, 0x6a45573f, 0xd57d07bf, 0xc1e1baee,
-	0x54fbbd60, 0xbc7943f9, 0xcf71f4ef, 0x3c1f79d5, 0x6f39099e, 0xb8c6a702,
-	0xf011fa1d, 0xd5f6fd49, 0xefda73cf, 0xdaf00b3e, 0x92fa94e4, 0x85e3edb5,
-	0x359faf94, 0x09f7cf80, 0xd85e1d53, 0x8477daf5, 0xadaf61f9, 0xc5ee159f,
-	0x44f7eaba, 0x985761f9, 0xd21befa7, 0x6fbbf8bb, 0xade98dbb, 0x667feeca,
-	0xdaabb50b, 0x89e99fdb, 0x96ed95e8, 0x642357be, 0x6d37b479, 0xf79450e5,
-	0xcd79fa64, 0xf2e18ee6, 0xe5c15537, 0x58ac81e1, 0x539b7782, 0x1375853b,
-	0xbcfdb2bd, 0x1fbf2eca, 0xfa12e9d1, 0x96fffb25, 0x42bf7144, 0x8f3f6bcf,
-	0x584f7d67, 0x91f3c9bd, 0xaf207dbf, 0x7dcbb347, 0x7ea46a21, 0xe725c478,
-	0x9e39a475, 0x8f4185f7, 0xdcb78a47, 0xef809593, 0xfcd2af24, 0x0d4cb2fe,
-	0xd06e1fc0, 0xf2f5329f, 0xbb5157db, 0xd9555f4f, 0xd7e7336f, 0xfbe30f8b,
-	0x13d5159c, 0x6bbcad39, 0xf5cb9f32, 0xa2eea71f, 0xa7a984f2, 0xe06bbfd8,
-	0xd9954e7f, 0xe9989a9f, 0xdf813355, 0x83f6ff5c, 0xd9e1ff54, 0xaf001627,
-	0x473533c3, 0xf6dbec26, 0x4cff97d6, 0xfe5d6df3, 0x36a3d627, 0xf8116b44,
-	0xd3f7717e, 0xc566bf5c, 0x7e802cff, 0x74956350, 0xb5db9c63, 0x91bf3d3a,
-	0xffa2c5a9, 0x63bf15aa, 0xb722223d, 0xbbd7f245, 0x3a3f1fbe, 0x65f9bcd3,
-	0x0e2dda85, 0x54e1ae6f, 0xfce1e7f5, 0xa204ab3b, 0x2b860c95, 0x5ce775eb,
-	0x47e06881, 0x72b948b3, 0xbf10d6f1, 0xa8925031, 0xdda88bdb, 0x8f5526e2,
-	0x41dbf457, 0x17f5a1a7, 0xf7ae77d3, 0x8a57bf3d, 0x763df926, 0x30d7fdd7,
-	0xfe0045fe, 0x64cf33ae, 0x9c3d026e, 0x5674f9df, 0x34369fb0, 0x72be72bd,
-	0x7df4e7fd, 0xd8be8e73, 0xc2db6f40, 0x0b85f64c, 0xf4eb24cf, 0xc2e9e926,
-	0xe7ecd933, 0xd9f7d44e, 0x0967c505, 0x085fbb47, 0x9e10678e, 0x971ce1a6,
-	0x0e1a6de3, 0x9d61fbb9, 0x6f8e2e2f, 0x67be0e1a, 0x68e141f0, 0x41bb63ca,
-	0xf41e534e, 0x8a7f8364, 0xfe2ca6e2, 0x42ca6fee, 0xd22d97fb, 0xa7cc630e,
-	0x8e14b9f2, 0xf0b5a27b, 0x6e7caefe, 0x8de426e0, 0x929dea71, 0x253bd4ef,
-	0xb75d097f, 0xe8ed2996, 0x1ee64fa4, 0x3ea4b3a7, 0x5c82f496, 0xde6593e4,
-	0x370bf329, 0x6fe1d894, 0xbcc9b7af, 0xfd897d6b, 0x35f7e618, 0x4fc4b569,
-	0xc5bf7473, 0xdda97f02, 0xfafefb0b, 0x3f1ce1e5, 0xcf3edb31, 0x7af6694b,
-	0x035c69bb, 0xe6fdfd0f, 0xf9f48bef, 0x0b890df4, 0xedb6a5ea, 0xf639c30b,
-	0x8e32e8a4, 0xb4a64960, 0x6cfb3ee3, 0xaa917c47, 0x6dc2dbeb, 0xea5ba1d0,
-	0x8fd78c1b, 0xef5e06ed, 0x2ff9a148, 0x5ea5e3d6, 0xfab848b6, 0xe37c959e,
-	0x052d7ce5, 0xc005d5e7, 0x2c5ce71d, 0xef2173e5, 0x7919bc49, 0xf0a15f03,
-	0x82f1f15d, 0x9f95d814, 0xc7f694c8, 0x8f2c7c50, 0xe513de1a, 0xd4cf5c06,
-	0xdc00ca1d, 0xa89d758d, 0x68e97af3, 0xafbfb4eb, 0x8c6877cf, 0x30477c8f,
-	0x1d6fd77d, 0x20248872, 0xd5ab6e71, 0x5bd42583, 0xbf43f7fd, 0x36aadfa8,
-	0x3b9704f9, 0x91739780, 0xbd41dffb, 0x0b621b05, 0xed180fa0, 0xf22fae17,
-	0x7bcd0796, 0x5e3356e0, 0xf3993506, 0xf3997783, 0x0d06715b, 0xe5dbe7fb,
-	0x21f9cc07, 0x93f9cc87, 0x3371dc1f, 0xea854fb6, 0xbe855fbb, 0x87f1e7f3,
-	0x7a9f4e70, 0xe06895f9, 0xcb5ff16b, 0x0b8f420f, 0x3c21678d, 0x7c73d02a,
-	0x97a6145b, 0xba5ae22b, 0xdc4643e1, 0x30627606, 0xdf0a54dd, 0x95da6b41,
-	0xa68acff5, 0x6744bd9b, 0xcfdecb55, 0xecb37a90, 0x5ad36477, 0xd0cee43b,
-	0x3be3bb71, 0xc6ebd222, 0x21192a3e, 0x365eaecb, 0xfe8a7c4e, 0x1e37bcd6,
-	0x2bf258f4, 0x929be585, 0x075fb297, 0x3edd1cdd, 0x6f4e46fb, 0x30f0c09e,
-	0x9b0b92ec, 0xe5144095, 0x8744235d, 0x8bf11f7f, 0xf1210da5, 0xe2426b9f,
-	0xcb99d682, 0xf7daee17, 0x504710ff, 0xe38278e1, 0x678cae2e, 0x5e801ff4,
-	0xb04a7959, 0xa9f2aa7d, 0xe5ccc26f, 0xf5f35d72, 0xade71875, 0xf1cb5df0,
-	0xaacb577b, 0xa3fe38e2, 0x4ba8e973, 0xcb73853b, 0x5eaf7738, 0xf29551b7,
-	0xfd84b7bc, 0x8e7691c8, 0x8876ac8b, 0xebcd0440, 0xebdd9450, 0xd697efa2,
-	0xb2bcb147, 0xe85ce480, 0x270a948b, 0x627a4dc7, 0xbbc4eed0, 0xd565cb2a,
-	0xd51e12f1, 0xb0fc51bf, 0xa8c3571d, 0x3293fc8b, 0xd80448bf, 0xf23a0bbe,
-	0xf803ad06, 0x468bce0b, 0x59565fa9, 0x9f00fb03, 0xab68738e, 0xad155eb9,
-	0xc838a3f3, 0x35efe67b, 0xd7eb8da2, 0x2c26faee, 0x3d907bf8, 0x435ef59a,
-	0xf97556ff, 0x3865fd4a, 0x20744fcb, 0x6cbe8384, 0xeebedcba, 0x6823921e,
-	0x7b0d2b7d, 0xdf295af8, 0x9e51b2dd, 0x679f2463, 0xd6eb4e01, 0xef867c92,
-	0xce206fa4, 0xf70a2c44, 0xea5ef94b, 0x6766eb0b, 0xf2f45cb1, 0x400a5e3f,
-	0x487b691f, 0xbad2bb61, 0xbaefd97c, 0x3973fafb, 0xe3c2a7f8, 0xb61cb184,
-	0xde518a6e, 0x4f91f587, 0xc864c530, 0x1ef7faf9, 0x4bdefe6e, 0x3ec166f5,
-	0xb2741e22, 0xfb90c47d, 0x2ebeb90d, 0x1ac9cb56, 0x75feb9d6, 0xf0516db1,
-	0xf88a89bb, 0x6cb725ef, 0x36e3cfd6, 0x2afc3f5a, 0x83e295c7, 0xf5198ff0,
-	0x73c96646, 0xef58f865, 0xfb1ebd16, 0x532dca5f, 0xe68ebdee, 0xc5b0fe55,
-	0x81a17b0d, 0x66f5e107, 0xd7c70e01, 0x77400b3a, 0x7b4ac7c3, 0xc97c91d9,
-	0x0a8623e7, 0xab1a378e, 0xcb363bf7, 0xc2934a62, 0x9fa91e89, 0x1ed245e3,
-	0x98b4351f, 0x132496ed, 0x6e2aebcc, 0x4fdeb265, 0xf7f8bdb9, 0x4f98bba3,
-	0x4a145d07, 0x6df8fbf9, 0x2f3926ca, 0x0e27c72f, 0xf6c9c07f, 0x39fae3ce,
-	0xe881e064, 0x0fcb1868, 0x0d8b5f3a, 0xa0b59ba1, 0xa0879c07, 0x6e982507,
-	0x8b7174cc, 0xee2be122, 0xbaf7f293, 0xe8379958, 0xf13ff482, 0x229ba0bf,
-	0x4eeff0c1, 0xdbd6340f, 0x74481e9d, 0xd07408b0, 0x0e842f51, 0xec3fd584,
-	0xa542fcdb, 0x2b876223, 0xab148284, 0x17ce21f0, 0xebc32467, 0xb11fab1e,
-	0x12adbd78, 0x92ac7d2f, 0xf1b4e8ee, 0x7d701785, 0x4b7de22f, 0xbc285c1e,
-	0x4524bf54, 0x1fad7db0, 0x713155c9, 0x45204edc, 0xbb0a8e58, 0x5f68a513,
-	0x2ffb2312, 0xfe3829e9, 0x5af3fa8e, 0x36e674e2, 0xc15efe1c, 0x47da0572,
-	0x9f7b7017, 0x5af7b645, 0x219bed29, 0x95b698f5, 0x5cbf1c61, 0x2c9f7772,
-	0xb1c4c9d0, 0xa2393a66, 0xde9195d3, 0x8dd6ed94, 0xf0249e75, 0xfe86d283,
-	0x3bd4de7c, 0x0277ab8b, 0xb047cf9f, 0xeab259fc, 0x618693c7, 0x7bc42f7e,
-	0x9333c280, 0xa83fb3b7, 0x4ff661b4, 0xb4be843e, 0x2bdfc9d5, 0x59f5b5b2,
-	0xf715ff90, 0xa1f49ddc, 0x7b01c674, 0x9ad7b512, 0x957f9ca6, 0xedbec9d2,
-	0x989e40ef, 0xfae55d3c, 0x3fb48593, 0xce39068b, 0xd6e7df24, 0xd26fea24,
-	0x69c38528, 0xa95d3a8e, 0xa40fc1b7, 0x2ca9f7e3, 0xe47f9745, 0x5592813d,
-	0x73d2b27d, 0xc9213fe1, 0xfd390bb8, 0x18fea353, 0xa5e40365, 0xfee4e3be,
-	0x1fa3ea33, 0x4b3a7bf4, 0xd5bf55ca, 0x09e462e1, 0x7cbf5cae, 0x8cd1d875,
-	0x40b6a468, 0xfde9a536, 0x7584bec7, 0xe3174c4e, 0x77ee03d7, 0xcf1362aa,
-	0xf984adb7, 0x1b965442, 0x4291abf4, 0xd6e3facd, 0x8f27ccfe, 0x7a3b698e,
-	0x6e8fe537, 0x8ced241e, 0xbe617dba, 0x707cb04b, 0x77e48c74, 0x98239b6d,
-	0x5ab88ffe, 0x3da4e2a3, 0x650ded8e, 0xb67c493a, 0xf87efeac, 0xed22cbb9,
-	0xcc7e7147, 0xc71a687f, 0x53ad9427, 0x07b86103, 0x6f6cc6b0, 0xded48aa8,
-	0xb5087ec6, 0x07da841b, 0xa3a03340, 0xd30a35f2, 0x8f7adf61, 0x9cf9993d,
-	0xcafac2e2, 0x70fd0323, 0x9c7b940e, 0x857cc71c, 0x826be0fd, 0xb9d870fb,
-	0xb5890705, 0x009f6b67, 0x258d254e, 0xe446efac, 0xfabfcc6a, 0xec1704aa,
-	0x26fe9d17, 0xbe0b5ec2, 0xc64d6d64, 0x9655fcbe, 0x3130f19b, 0xc91595ce,
-	0xfbe4ed74, 0xae6d4711, 0xe8efcc2c, 0xe705a74a, 0x9215c4ed, 0x39df69be,
-	0x1ee18f70, 0x3f0708ab, 0xfb259ad8, 0x5adcb39d, 0xbdf291bc, 0x151ac21d,
-	0x67cafa07, 0x5fd85efa, 0x75e62dfb, 0x046217ea, 0x35b289e4, 0x74bce56b,
-	0x96d610fa, 0xe71a78c2, 0x02b4e6d4, 0xe43a01d8, 0xdb63fedb, 0xba0ec701,
-	0x3d30ae98, 0xc10e7ad0, 0xbfde9c8e, 0xe9ca32f4, 0xcbd03efb, 0x7e81b1c4,
-	0x522f1b88, 0xb6be38ab, 0xe078493d, 0x6d176c77, 0x93b48f2c, 0x67be023c,
-	0x9f8319f0, 0x1d785d10, 0xdef89d89, 0x22534752, 0xceb5be1e, 0x75b3e9c1,
-	0x7825612e, 0xe24bab6f, 0x6e750bfc, 0x72ea9b4e, 0x758bfbf8, 0xa8efce1e,
-	0x97f9c11b, 0xdf9cbceb, 0xd3813755, 0xf98aeb57, 0x08afc1bb, 0x0c97cc3e,
-	0x27f063be, 0x3e0cbe83, 0x73574a15, 0x17b8cc09, 0x1f99ed41, 0xeb107c1a,
-	0xf27414b0, 0xe9cf0327, 0x092fb14a, 0xceb450fc, 0x5228ff06, 0x0aff3dcf,
-	0x22bdb9c1, 0xed22ed92, 0xf6c1f242, 0x079f0748, 0x0bb176a9, 0xdbfa89f6,
-	0x0eef47bc, 0xad6f873a, 0x88358450, 0xc4bc7f8e, 0x7441ac29, 0xac596f3c,
-	0xd9673f29, 0xa4f46ffb, 0xd18ddffe, 0x1e69b372, 0xe2797e47, 0xf7d13ff1,
-	0x4cf2fcdf, 0xf34ef026, 0xc608fcd8, 0x9f5c2bbd, 0xd79cab47, 0x9796765d,
-	0x7d4b86fa, 0xd4b86fab, 0x08e3f0b7, 0xa23dcf8a, 0x2d24a3e3, 0xb1a79df6,
-	0x9baeec6f, 0xb44ec047, 0xfa4bde52, 0xf2a3f804, 0x2bf8e8bf, 0x70c6165d,
-	0xf7d06d2d, 0x36dc706b, 0xb258f5c1, 0xf14ef960, 0xd7bf010a, 0x03d85fb1,
-	0x63882b24, 0x40afc38a, 0x6be52276, 0xab98ec0e, 0xe411f77f, 0x21d96576,
-	0x4735b396, 0x087fc724, 0x705ced9f, 0x83b2ca7f, 0xf6b44f5c, 0x466fc536,
-	0xc1daf50c, 0xc0e34037, 0x7ece695f, 0x1a2efd81, 0x547fbe15, 0x5f2f7fae,
-	0xa2e298ad, 0xf2ab6467, 0x959645de, 0x4259f3d3, 0xf91a473f, 0x96e832bc,
-	0x61c708f8, 0xdbe63796, 0xe7f10417, 0x597bfd52, 0xa714c58e, 0x9d967f79,
-	0xcd8f39fb, 0x9bdefd49, 0xcf9f6e93, 0xf7cdcffc, 0xa5fa8c05, 0x60ab0539,
-	0x835d2e4f, 0xf6cea6a8, 0x7d56d925, 0x7fa92e5e, 0x8b5ce839, 0x2ea2f8e2,
-	0x9e4307cf, 0x475f8539, 0xef59fcf2, 0xb9e17caa, 0xac8fe017, 0x9f1873fc,
-	0x75839553, 0x7fae4afb, 0x839634f8, 0x70ca91bc, 0xff12e1c8, 0x35fdcf85,
-	0xb55d711a, 0x97bda43b, 0x6b48a3d2, 0xfb60aaee, 0xf6878d5e, 0xadf81c49,
-	0xfaffefd9, 0xfbe67f0b, 0x14b0849d, 0xe3986e3d, 0x7c766ad4, 0xb06bf1ca,
-	0x7286f9c7, 0x1d5f1c7f, 0xf956beda, 0x4257f59a, 0x68a7c32c, 0x3c8997cf,
-	0x12979d8f, 0xf76ae7c1, 0x2aec4cac, 0x1fb4288e, 0xb0c1ce23, 0x358ad5ff,
-	0x59cfc39f, 0x9384d77b, 0xff65de92, 0xca1eeda1, 0x31384a8e, 0xeec62050,
-	0x5893b62a, 0x2c9fc705, 0xed38edd5, 0x63f64cfe, 0xd7772777, 0x2446a7ae,
-	0xdd5bb592, 0xbeb38831, 0xae84c428, 0xb649f4f0, 0xd3cf6b94, 0xfb3f823e,
-	0xe59536e2, 0xa2db8bca, 0x6cd43f78, 0xe220f07b, 0x529e6b04, 0x2d58edd8,
-	0xafce385a, 0x1c2a8766, 0xec1de7c1, 0xcfddf147, 0x5173f173, 0x8b5f404b,
-	0x66ef149a, 0xc3bb4f9a, 0x6823d31d, 0xbe80af3e, 0x87173488, 0xff470d35,
-	0x079ffcc6, 0x37920b7f, 0xc83f3517, 0xef548df1, 0xbf37cb02, 0x3c38e08d,
-	0xc1dec93a, 0x186ecf3c, 0x45f5fec2, 0x586bdb4d, 0xe116d83e, 0x8ce9e982,
-	0xe40f7ccd, 0x81de3e80, 0x9c8f296c, 0x67d1edd5, 0x1f59505f, 0x2fb13cc2,
-	0xb871e8cf, 0xf537bb46, 0x4b666f76, 0x5b26a7f9, 0xfea34fee, 0xd1a3a6a2,
-	0xc9fea8fd, 0xfa73ef5d, 0x166fbebe, 0x3df0b645, 0x223b93cf, 0xc9e09ef8,
-	0xfe39ff1d, 0x7cef1a35, 0x250498d3, 0xc89d9f68, 0xba7dc9b6, 0xf32fc641,
-	0x13d61725, 0x673d789a, 0xac28a5b7, 0xa4de032f, 0xf1dd9fb7, 0x3643df12,
-	0x1c1febe4, 0xb14b382f, 0x18a3dc86, 0x8d72083d, 0xd7bf55a3, 0x63dba6d1,
-	0xaffa6ffe, 0x5927bfd1, 0xe471f58a, 0xc4610d3d, 0xbd64b86f, 0x27b73522,
-	0xc1dcddf6, 0x97b899ee, 0x7192de2d, 0xfbb7a297, 0x737fe811, 0xbb678ddf,
-	0xbb9b52cb, 0x1c5ff227, 0xe0958526, 0xce887733, 0x875a9257, 0x347bbec1,
-	0x8615ca4d, 0xb56aad3f, 0xbf04bc22, 0x3e67445e, 0xd0aafde4, 0x49c90760,
-	0x563d7c67, 0x71daf161, 0x99d9463e, 0x3bb7ea2e, 0x75bec137, 0xec7c2ec4,
-	0x29d17b7f, 0xd2e927fd, 0xf618f20f, 0x7155a517, 0xd878ac81, 0xa9ba74f1,
-	0x41e54a9a, 0x29b553f4, 0xea390590, 0x2bda5d9c, 0xa9fd0e51, 0xabd640aa,
-	0xfd14e9d7, 0x69a3dfa0, 0xf72c0bae, 0xd0128cee, 0x44af2c3f, 0xd3c8bb49,
-	0x41614dce, 0x1cbf76e7, 0xc777118b, 0x66df4afe, 0x0bcc3f39, 0x7b22fcf2,
-	0x5de41663, 0xd145dc63, 0x39de3c8d, 0xe145bc7d, 0xa39fd28d, 0x3ea211c7,
-	0xec136f8f, 0x267b6a77, 0x33e6e58c, 0x632f2dc9, 0xf4cf33fc, 0xa387b8e7,
-	0xbb05fe69, 0xf1c9dcb8, 0x86cf95e7, 0xd3df3005, 0x5db144cf, 0xca4db4eb,
-	0x12a3a763, 0x143b1e59, 0xf65cf0f5, 0xa6153d63, 0x5a742ec0, 0x9424f611,
-	0xf2c1ee6f, 0x32dd6540, 0x1254d7f6, 0x4b1c817b, 0x7fc804e9, 0x67f737a7,
-	0x37e9d17b, 0x415cbe55, 0xbbe357df, 0xfee71a26, 0x0880f58c, 0x799e23b6,
-	0x83fd6ff6, 0x5a463bfd, 0x3ed994f9, 0x5183d066, 0xf923945e, 0xd48e5160,
-	0x71c86e53, 0xd11d5a71, 0xaf3a70f4, 0xc207f253, 0xb481eb03, 0xef61131f,
-	0x3bb4d23f, 0x9c048951, 0x09ff5903, 0xfa956fb8, 0x366d99d6, 0xbe5553f6,
-	0x3b65e512, 0xf157ddd4, 0x554ac97d, 0x1695e3ca, 0xf950df79, 0xffb656e5,
-	0x2ce33fd4, 0xde083c00, 0x6db6dfac, 0xe471f556, 0xf4b7a7b8, 0x808d7e91,
-	0x10797f9e, 0xc62635fb, 0x59537989, 0x0790dace, 0x2a7a5eb8, 0x69fee382,
-	0x34e22f1c, 0x73f67f2a, 0x0598cf09, 0xc1d027ac, 0x4ab9fccd, 0x77d5cfe7,
-	0xfb83135f, 0x955de210, 0xb25c79ef, 0xff827a7a, 0xd1ebc286, 0xbf3f9d1c,
-	0x83f338fc, 0x8837da2a, 0xfbac5b0f, 0xab3f1713, 0x78b95cb0, 0x308f35d5,
-	0x26c77ddf, 0x5ce22f70, 0xc1d183d3, 0x91cfa8f8, 0xbdb3b0fc, 0xa62feb87,
-	0x5bfdb2fa, 0x2d9f3cd1, 0x13e60f36, 0xddefc78a, 0x07f559fe, 0x226cafb5,
-	0xcaef22f9, 0x2d125ff5, 0xf833fd3f, 0xfb2736cb, 0x7cff0951, 0xadacea3f,
-	0x7fd60169, 0xf32779f6, 0x72b1b39d, 0xf3a49fdf, 0xf98d97d4, 0xb66bf4dc,
-	0x9a61fccb, 0xd0b439c0, 0x98d7ee6f, 0x9b1cead7, 0x4f78b7a4, 0xd544fc0c,
-	0x47f40f84, 0xb711f9f8, 0xedc6d77f, 0x40b3d743, 0x4fb1d76f, 0xba608f9f,
-	0xe24bdb39, 0xd90bece5, 0x8d1d9e7c, 0xf34ef495, 0x74de854d, 0xb8a65636,
-	0xa87a0499, 0x387a4974, 0xed89a63b, 0xed956702, 0xc9b51e9c, 0x74cb9576,
-	0x5fd13b7f, 0xb407e812, 0x63aabb09, 0x19e40b4d, 0x05e1f9f0, 0x4f70069c,
-	0x0e8ed43b, 0xd7f9c53a, 0xe333efaa, 0xebf6051d, 0x89a79fb0, 0xba6bc7ef,
-	0xedb5593c, 0xf0257f4a, 0x614db554, 0x197fda7f, 0x13acd0fd, 0xd1003f0c,
-	0xc29f62e5, 0x6e2c22ef, 0xfb116db8, 0xbdac96d3, 0xac6f7415, 0x6f7eb163,
-	0xf2a2a8fc, 0x693a8e7c, 0x395ee4ff, 0xdfdf019e, 0xef1d28e7, 0xf38cb875,
-	0x3bf0f68b, 0x47496e39, 0xfea46d94, 0x35941aaa, 0xa19a4e3c, 0x19f5cae7,
-	0xd8b02270, 0xaa3be761, 0x6eeed3df, 0xbb3cc6fd, 0x9d31cf9b, 0x934d1fcf,
-	0xdedb93f7, 0x2fccf796, 0x26243d7d, 0x41e45bee, 0xf46061be, 0xd063b887,
-	0x22f3f520, 0x35f61cf8, 0xcf34ebec, 0xff660dac, 0xe653ce4e, 0xe66d80fc,
-	0x730eee7c, 0x9cd9af3e, 0xce6ebcf7, 0x0ee309ff, 0xf41384eb, 0x4235c46f,
-	0xfd0a46ff, 0xf5261ddb, 0x7fa1e46f, 0x8dfe8523, 0x91bfd0ef, 0x3c8dfe87,
-	0xa1e46ff4, 0xfe85237f, 0xfeeeef8d, 0xba554e12, 0xe07814bd, 0x4eddbab8,
-	0xf7813e23, 0x89d9c5cb, 0x558547cc, 0x1717a5ea, 0xd8fcb2e5, 0xe29a6f61,
-	0x11937b60, 0xad18958f, 0x1c47f785, 0x2ab2d280, 0xb1db8d39, 0x55f6ba1d,
-	0x2aae8769, 0xeec24670, 0xe4f2bad1, 0xa73d882a, 0xd418b4a3, 0xdb6b68bf,
-	0x2f56f802, 0xff7ec03b, 0x77eee5d6, 0x63f893af, 0x5f118bfb, 0x0f738255,
-	0x25f49b7c, 0x71ee7719, 0x4353db04, 0x4d6244fd, 0xd3f21e50, 0xd43e733a,
-	0xe6be042f, 0x46abed35, 0x6c6fc7c6, 0xfbe0c96d, 0xe0e33e9f, 0xea9f69fb,
-	0xcb313bf6, 0x2198f2c1, 0x1bce23cf, 0x9f7a5970, 0x95e709b2, 0xc31c7fa7,
-	0xa650fdb9, 0x68617ee9, 0x0879765a, 0xf91df3cb, 0xe3058a35, 0xbe5f4f94,
-	0xcd6af58f, 0xedd2e7cb, 0xd7b2dcfa, 0xeef34c5b, 0xd1370fef, 0x71adc0d1,
-	0x5ecc7e21, 0x7783faa6, 0x31f887a5, 0xa7ca9807, 0xbe6219ad, 0x8d7c5f8f,
-	0xbdafbca9, 0xa1cf6e23, 0xfce4b9fb, 0xa5ceb25c, 0x6f5e02c8, 0xc554bd68,
-	0x6ff827f3, 0x4e52dbc5, 0xc673a72d, 0x2bbfaf1b, 0x9d7f0052, 0x57e03277,
-	0x858b64d1, 0x3f4cad9d, 0xf332c487, 0x15615cb9, 0x275c573e, 0x84b855dd,
-	0x7fda9637, 0x654c6d69, 0x47e5fa3a, 0x68812aa9, 0x3c9680d1, 0xde8bafe8,
-	0xe838727c, 0x98dd5aaa, 0x3bf2a2ea, 0x5c16ff14, 0xb7133f20, 0x9524713d,
-	0x495aa927, 0xaa73c27f, 0x1cff702d, 0x19edd1f0, 0x7ca4ef02, 0x68a5e6ba,
-	0xe9d41f8e, 0x0ae6d52f, 0x6c6c1d07, 0x814f5954, 0xeb8d4cfd, 0x8d8d93a4,
-	0x6bd0e1f1, 0x3e28c62a, 0x5c06c7c8, 0x8508fa0c, 0xefefc907, 0x97bd69ba,
-	0x94f7c90e, 0x752e758c, 0x41a2fac9, 0x07de37b6, 0x5c7bd630, 0x372b47d7,
-	0x3b7591be, 0x7fd73f7d, 0x7e1b9e5f, 0xbc5dbadc, 0x6d96c5ee, 0x7d29925b,
-	0x85dda1c7, 0x7b7d2d75, 0x1a48f45c, 0x326dcbe7, 0x75b3fdae, 0x23e13e4f,
-	0xe3777a7e, 0x0fe87693, 0x9dbf5695, 0x6679cddf, 0x0ef11da3, 0xc8dd6fd7,
-	0x2d6c17df, 0x71807b61, 0x1194eecf, 0xa3c3ad97, 0xc1b2ac62, 0xde3ceb45,
-	0x1585ca5f, 0xa69e32e1, 0x46f51d48, 0x55b5d602, 0xa6bac7c9, 0xe3b76f17,
-	0xf58781fd, 0xa6fba17a, 0xa2b4f0fd, 0x357bb01e, 0xd4c71c29, 0x11993edd,
-	0x64fbcfe8, 0x4e34e5da, 0xc81e5fa7, 0x8287de7a, 0x239c2fb4, 0xf5fa21b9,
-	0xf5da5561, 0x4ef9559a, 0x30903d98, 0x5ec2f20d, 0x35456ef9, 0x0a23439d,
-	0x710bb7a0, 0xa3c5a535, 0xd79d1354, 0xf6984616, 0xb4112cc1, 0x9bbfa8af,
-	0x7e532f45, 0x530cc4fa, 0x07d399fd, 0x0b9df886, 0x7f99cb3a, 0x8f7a6d5d,
-	0x9f2efaa6, 0xc7bb615b, 0x4a77f358, 0xbb3a62ef, 0x5abed4d1, 0x47bd354c,
-	0xf7a9e8b3, 0x6544ce18, 0x54e1c476, 0x6658f7e8, 0xeff54769, 0x169dfcad,
-	0x7dafda62, 0x927f3c33, 0xfd8da5e7, 0x7d3d8609, 0xe8cf7e16, 0xef0cbcea,
-	0xbc451788, 0x9a1dec30, 0x61691e59, 0x3c48553d, 0xa8f6eb54, 0x8f691cea,
-	0xd8b5f6aa, 0xf04d8f11, 0x4810a6b7, 0xb6151a6a, 0x477d5237, 0xdfcc9c4a,
-	0xcc3bef85, 0xdfd052f7, 0x521f9465, 0x42bfb04b, 0xdd686bcb, 0x606a1738,
-	0xd83b6247, 0x076c9384, 0xfbd1c633, 0xf434e837, 0xfed0807d, 0x33700c06,
-	0xbadcaeff, 0x822f60fd, 0xd8e2b4cf, 0x549dc47c, 0x95b14d35, 0x6f495ee4,
-	0x54bfff06, 0x7ebf6161, 0x4c03e1fb, 0x5615ed6f, 0xff4b8c8f, 0x78d4b876,
-	0x9435dda5, 0xbad0170e, 0xb05e7fe0, 0x15f8f143, 0xe9f00f59, 0x810cfa05,
-	0x70174a4f, 0x01d5e033, 0x7e7290bf, 0xe2286e3f, 0x0a7be426, 0x1425c057,
-	0x0b38fa9e, 0x2772c134, 0xf3cfcbcd, 0x8c57e90a, 0xb78fdd08, 0xb0ffd9db,
-	0xe52e1141, 0xf531e1bb, 0xf4e3b4b2, 0x6feb90cd, 0x2078a9db, 0xd97cdfbf,
-	0xe83bdfca, 0xd9c658a7, 0xde689f4f, 0x54f41daf, 0x8ccff72c, 0xeedc89cb,
-	0xdf5745df, 0xff864f45, 0xdd7e3426, 0x19e647b8, 0x1ab7dfa0, 0xf37d8626,
-	0x1be1c44f, 0xe77741f2, 0xe439c74c, 0x9910f1d2, 0xbcf9e5de, 0xe39d2a34,
-	0xbedd35cc, 0x4d69f068, 0x5b8c676f, 0x78eee542, 0x7e6f7bd0, 0x43557167,
-	0xfbf06a46, 0x1b4ada37, 0x975381db, 0xe25a73c7, 0x7ce22574, 0xdf2e5929,
-	0x4f763969, 0x29f844cf, 0x25b4ad8e, 0x8faea44c, 0x553439dd, 0x88be420c,
-	0x86d74fd3, 0xcfb60acd, 0x032de91b, 0x9c61f9e4, 0x872de7ef, 0x3f6167a3,
-	0x8d19dcae, 0x2bc5a190, 0xa2ee1fdf, 0xa2d9be73, 0xfec01a2d, 0xce7c8de0,
-	0x3cc6d70b, 0x390ce7d8, 0x516572a3, 0x5503c84f, 0x04f038ff, 0xb96d01e4,
-	0xea72112d, 0x81540fe9, 0xe73a1ad0, 0xe538be58, 0x6a7df494, 0xabdf0473,
-	0x2f08a53c, 0xd48b51fc, 0xd32e797d, 0x337cdb79, 0xd2708fc6, 0xae30c3b8,
-	0xc6124b7f, 0x30b2f8f5, 0x333cb6ae, 0x8bbb2ba6, 0x97aed691, 0xc316dff2,
-	0xa3dbacce, 0x0f23f721, 0x4b645fb9, 0xc8791fb9, 0xf72148fd, 0xfc0d7be3,
-	0xd71bf00e, 0x6f43e5b7, 0x39158df5, 0x8e1cf84b, 0x7f5c81cc, 0x01ee12bb,
-	0xf15dba3f, 0x8478e4f4, 0xf9e5620f, 0x2357821b, 0xb246dd1d, 0x5edd1059,
-	0x8221d977, 0x88c6ebe3, 0x9c7e5358, 0xbf54d923, 0x2a6695c8, 0xbfa93ebf,
-	0x7706fca9, 0x537f29be, 0xfd5348ce, 0xa6319e49, 0xdc468ffc, 0xc53faa60,
-	0x9f94c53b, 0xa9b66136, 0x12e28cfe, 0x59ccf953, 0xb3e54c8b, 0xf94cdbb5,
-	0x34ee2b5b, 0x92f1ffd5, 0xaf72a6e5, 0x0e715970, 0x231f4336, 0x3e85efb8,
-	0x6fede946, 0xe3064667, 0x4b38d475, 0x350cef97, 0x56fa900d, 0x39f7ae74,
-	0x09ee25d0, 0xe8fb0e81, 0xe2f680f7, 0xbf06199c, 0xfa914065, 0xe8324b70,
-	0x685eb426, 0xfd88a8f9, 0x6594f097, 0x9f6ee7ff, 0x313e2561, 0x43fdaaea,
-	0xfb7f2832, 0x5619e6c0, 0xaea32fe2, 0x3a52ffd9, 0xdcf17fe5, 0xf07cb237,
-	0x57284bfe, 0xfccbf772, 0xc822c134, 0x9bce06af, 0x8c75a3e1, 0x8d7d2eba,
-	0xba53da47, 0x5235538c, 0x9d7101c0, 0x00d20380, 0xfdd227d1, 0x5f489f44,
-	0xb72cfa27, 0xe8907109, 0xd221e913, 0xf7fdf14b, 0x3d2297a4, 0xd2297a4c,
-	0x452f4877, 0x297a42da, 0xcdd43fd2, 0x3a83f4e2, 0xb1fddb8d, 0x8fd382ae,
-	0xf7f096ea, 0x7196ea4f, 0x1f3a97fa, 0x8064ff7f, 0xb0087f61, 0x8bf0c69d,
-	0x091fc0d5, 0xdb2ede7b, 0xb1bf60b9, 0xabe795e2, 0x5facc7e1, 0xb0235a22,
-	0xb1ad5b4f, 0xfe9d1c27, 0xadf9eec9, 0x92089c55, 0xdee19ccb, 0xf8f006cf,
-	0xb7cc5dbd, 0xc447eff5, 0x84053eb4, 0xb5d34fa7, 0x3307e0b3, 0xc656ca0a,
-	0xeeb8ff10, 0xd03625eb, 0xae9687cb, 0xd5efa3ef, 0x03a7dbf9, 0xf7e86dbd,
-	0xa65dfd5a, 0xae321d6b, 0x6b6b5af0, 0xbfdbdb3d, 0x03c46e14, 0xefec33ed,
-	0x5ef958f7, 0xe085f2b1, 0xc104e8fc, 0x5b2ffaf9, 0x5af10e38, 0xcf892797,
-	0xc46f3d1d, 0xfdf87505, 0xef1413f1, 0x8de1f863, 0x2fc29f78, 0x3e41c75a,
-	0x77691d18, 0x0dc48587, 0x2fbedfc0, 0xbcc68fea, 0xc3277df8, 0x97d4ffbf,
-	0xf2f78022, 0xb5fe3f0c, 0xd834968e, 0xe1df4615, 0x33c704f0, 0xe57afe19,
-	0xe715168b, 0x64af1189, 0x3bcc638c, 0x15fd4aca, 0x5d23c674, 0x47ca6aeb,
-	0x757d465c, 0x93d7f724, 0x49dde3be, 0xb955e7aa, 0xec3e535d, 0x22aba3c7,
-	0x8ce9423d, 0xafa9e813, 0x3af1ea9b, 0x38d0bf0b, 0x1eb4624e, 0x1c7e8127,
-	0x01df9cb2, 0x48109d1c, 0xa39ffbc6, 0xb03dd897, 0xb88e3e83, 0xb8ce82b3,
-	0x088fd405, 0x2798c7da, 0x15f7edfa, 0xbcf217cd, 0x9df0cbd7, 0x29f492e6,
-	0x3f5e7adc, 0x2c6385af, 0x3d54bbdb, 0xfae61c5f, 0xcfd1046b, 0x90da19ad,
-	0x1fdfd481, 0x7ccc8c94, 0x7a3217d6, 0x094fdf60, 0x0bb04779, 0xf03119fa,
-	0xbc7e84ff, 0x05bdef12, 0xe942e1db, 0x418fc0c8, 0xbbde064f, 0x0e832ba3,
-	0x18d0e282, 0x65711def, 0xf4a17f7a, 0x199d1dd6, 0x43ad75f4, 0x8cf001d2,
-	0xae8320f8, 0xf89a2f94, 0x2ae8eb1e, 0x067f9f07, 0xc5d2855d, 0xe9257495,
-	0x0e27feb4, 0xba4aefee, 0xc007a4ea, 0x55d387e5, 0xf8f38a8b, 0x79a7a59f,
-	0xee3c626d, 0x765c97ff, 0xabda441f, 0x7c17b69f, 0x198c4ca6, 0x2e13120f,
-	0x62ec1075, 0xba32f5a1, 0x7f4a17a9, 0xbc6eeda1, 0x6e465da2, 0xfa71bb70,
-	0xaeda1959, 0x047aed12, 0x71c21bb7, 0xf7e96f11, 0x1a72de08, 0x999e2d71,
-	0xb90e5390, 0x2f2df26d, 0x27cc8de1, 0xf3a719ba, 0x096243f3, 0xee24bf9f,
-	0x854f40fa, 0xcb8d693a, 0x42fac85d, 0x71d76461, 0xedea3705, 0xdc5d7fc7,
-	0x4f8cf980, 0x37e3cb30, 0xf5fcf2ea, 0x0ffb91a2, 0xc6e1477d, 0xce59ebdc,
-	0x61477d0f, 0xfe3d40f3, 0x81a44d20, 0x8f0a17df, 0x0efe9f9c, 0xcfbea146,
-	0xc9ba7453, 0x5462ab70, 0x6a9bee1c, 0xaf321c56, 0x3c8c1de3, 0xfce3eb8c,
-	0xe9cfc20d, 0xfdc0224d, 0x0903a24c, 0x61091ff9, 0xc85fef93, 0xaa35bafb,
-	0x5790dff6, 0x4fba7b8d, 0xb057b53b, 0x4c440fcf, 0x4a77839e, 0xd7190dc6,
-	0x17f6ed0f, 0xdbce59ba, 0xb960c8ef, 0x16d2fb13, 0xde27c9d7, 0x5fba73a4,
-	0x8a37bca6, 0xfb46f714, 0x3bfa79d1, 0xbf91c73a, 0x40b96731, 0x736ef1bb,
-	0xfed193bc, 0x6138d726, 0x9cfeef8d, 0x776f29bc, 0xdecdd86f, 0x042ecd8a,
-	0xbd8adf7e, 0x7deb10aa, 0x45a7b62b, 0x4e7661a6, 0xafd2bd07, 0xa0d8b92b,
-	0xc6f1cefb, 0xc1dd78f3, 0x286b80d9, 0xff380d3c, 0xeb1eb800, 0x077bae0a,
-	0xaa379608, 0xad5f2423, 0xd57c908e, 0x58757380, 0x9ede7dc7, 0x5527f1c1,
-	0xf9af090e, 0x5611aecb, 0x2c17f512, 0x93f9c91b, 0xb807c275, 0x6092c69f,
-	0xf7b10f10, 0xce58eb09, 0x9ddcef1b, 0xe8bdf87d, 0x2ae79a24, 0x983ff687,
-	0x4082b9df, 0xe2844916, 0xbe7a86e4, 0x05fe7f8f, 0xaa7d03d5, 0xf1af754a,
-	0x96facec0, 0x7d71ef2a, 0xfe15207d, 0xd754f158, 0x0e55e8f1, 0x9f435f09,
-	0x98afd21c, 0x5fb1adf7, 0x80befe85, 0x0ef55f21, 0xc6dcf193, 0xe4eef73d,
-	0x92e1e1ad, 0x930ef5af, 0xebc0d8fc, 0xee7ebb06, 0x89c33f53, 0x3afca68f,
-	0x98abf59c, 0x2e4c6f58, 0xc28583ec, 0x76189fa4, 0xf904f695, 0x22b5ca7e,
-	0x945191eb, 0x13643c2f, 0x076f2a7e, 0x92794043, 0x1fb6b3f4, 0xef82a4ba,
-	0xfc294517, 0x6f71863e, 0x22c92c29, 0xc27c41dc, 0xbd370ee9, 0x13911b4b,
-	0x7947ca67, 0xc7ea997a, 0x9537488c, 0x98077ac7, 0x1427e3ca, 0x8a3df298,
-	0xefd536af, 0x29ac6b39, 0x68ddac9f, 0x31529faa, 0xf83794d5, 0x24fc8a58,
-	0xc5b92cfa, 0xb2efbed4, 0x34fd5352, 0x5ca9a55f, 0x319b3bc5, 0x25b7ab40,
-	0x81cf1127, 0xd58c9fca, 0xe3de434b, 0xf0cb08b5, 0xfe6b77ce, 0xcbde5a33,
-	0x80b91099, 0x6cc9afdf, 0x9e7999fc, 0x2c6b44ea, 0xcdbbd7a5, 0xc928b17c,
-	0xb9171f9c, 0x71df814f, 0x9fcccb9c, 0x4d589653, 0xeae51ff9, 0xe44f34fc,
-	0xbbe3ddb1, 0x300daff0, 0x4e143fe1, 0x7efc0f44, 0xef9d3b68, 0xcdebcc3e,
-	0x070f7e32, 0x75e0937e, 0x0c126fc0, 0x824df807, 0x049bf0f3, 0x24df87d7,
-	0x937e1cb8, 0x8721f2e0, 0xd61ff8cc, 0x55ffc662, 0x6ff1991f, 0x787765d0,
-	0xa66ad91a, 0x9a29a10f, 0xba782df2, 0x7e9994e6, 0x1d73f142, 0x09b15b89,
-	0x09e287c0, 0xbe387fb8, 0x8be08656, 0x37f7c3f0, 0x31477bdb, 0xd7d71e7e,
-	0x20606d75, 0x3a2e97df, 0x6fbc0aa4, 0x71f3ac63, 0x6d3fdcfd, 0x89731ad5,
-	0x5dcefccf, 0x763e0490, 0xdb7e909d, 0x4f1655f1, 0x207fba80, 0x29d99c64,
-	0x3fa843da, 0xaa52fe2b, 0x26d2741d, 0x0e7bcfdf, 0x95d8797c, 0x123eb2f1,
-	0xf6bef84f, 0x27be54cf, 0xa8d2c475, 0x8eaf8f80, 0x9f009ed1, 0x84bb9799,
-	0x8a249bd7, 0x5c402fb7, 0xa5857fd4, 0xafb73f22, 0x722dc7bc, 0x89fef95b,
-	0xa6e727c1, 0x2da9b8c8, 0xdd7fbab9, 0x9ea7e323, 0x777295c9, 0x71c5c794,
-	0xf2b925de, 0x8ba90d7e, 0x010773a9, 0xd99d873e, 0x0b3acf80, 0x8ad9ebbf,
-	0x9d09e47b, 0x0f21c8f7, 0xa3ecfe43, 0x1ff57fcb, 0x47581c3b, 0x3a617af6,
-	0x1dfbfb7f, 0x81e2f8a6, 0xfca65d5b, 0x5324a6a0, 0xdcbbc1fd, 0x40fcf2a6,
-	0xc87ca98e, 0x3f298f21, 0xa98465ac, 0x791f55fe, 0xad91f94d, 0xaff54c13,
-	0xca6c5539, 0x47b688a7, 0x8abedf01, 0xcd1c53b4, 0xb9fa974d, 0xe4dc705b,
-	0xe563bbdc, 0x7edd5f7d, 0x46fbc861, 0xd3a6b9dc, 0xd11ea875, 0xe8e52ed7,
-	0xf52164fa, 0x1fae8746, 0xa13eb30a, 0x1de371e9, 0xe67c58f7, 0x5e2371b8,
-	0xd0ef43bc, 0x7b8e8af5, 0xe2f19d34, 0xf178e0de, 0xbf5d61b9, 0xc75e7d1f,
-	0xfbfce87b, 0xeb7ae5da, 0xbdf3b4ef, 0xa15e631d, 0x96c949f3, 0xd1d9bb74,
-	0xbfaabdf5, 0x46fb4ae5, 0x25f1666b, 0x3613fdd0, 0x6dff2b4f, 0xf3c62b84,
-	0xb75e22b4, 0xcf7617fe, 0x8f77f70a, 0x5cb07737, 0x658b1ccf, 0x8e5c94de,
-	0xddfd338b, 0x92418884, 0x7583adbe, 0x78c84afb, 0xdc646373, 0xbbb1889a,
-	0x8fddbf41, 0x6499e127, 0xff7c0d17, 0xf167bf4b, 0xf74d35e3, 0xbd8e68a1,
-	0xce3f7f51, 0x4c3d036f, 0x59f24b1c, 0x5b13c93e, 0x49143d7a, 0xcb13ca72,
-	0x8a9f6cac, 0x3757fe7b, 0xde75fafb, 0xfa4be99f, 0xb203e810, 0x07a8f40e,
-	0xb72954f2, 0x2beb920c, 0xb8eebf52, 0x187ec0e7, 0x43f3f421, 0x174fbc70,
-	0x6874c6f4, 0x75dfe3ac, 0xdba0c1ef, 0xfa193850, 0x3be3d0af, 0xd2f319fb,
-	0x07ec67e1, 0xfdc67e03, 0xb66df713, 0x7c914de2, 0xe202658f, 0x6dfc0ce5,
-	0xc6f693c9, 0x503c3a05, 0xbba8fc0f, 0x6e6a457a, 0xedf7ec0c, 0xeae31dc2,
-	0xea3b0e82, 0x62e09bff, 0xfbbbbfc0, 0x87f1dd6d, 0x5df0be50, 0xa3baddf7,
-	0xdef67fd3, 0x909f105b, 0x5e3a4bf1, 0x1c2cfdfc, 0x94777017, 0x323f3f79,
-	0x9189f248, 0xe4fdf483, 0xccd6fd23, 0x0ffc042f, 0x9d552bf5, 0xbcf3c85f,
-	0xdf98ad24, 0x8af9c6af, 0x37f35bfb, 0x8847f94a, 0x87abc4e2, 0xe36f8fc2,
-	0x7ad7cbfb, 0x4a6ddb05, 0xde3f151b, 0x75f12af9, 0x9fb30fad, 0x0772cdcf,
-	0x26c83bbf, 0x46576a4d, 0x5da5f6ed, 0xc2facef9, 0x60eef948, 0x0beafbe8,
-	0x2f19bd75, 0x86df606a, 0x19eebdfa, 0x3cb1fba4, 0x9cf2c3c2, 0xa150d71e,
-	0x37a0e9d7, 0x0e6f7cbf, 0x31f6327a, 0x671f1ca5, 0x3f0dcdc0, 0x3cce90d4,
-	0x073c37c1, 0xb58379e7, 0x0ec5f8cb, 0xab7e1af8, 0x61ecbf0e, 0x1a1127be,
-	0x77ce718f, 0x3f2bba20, 0xeb1fe198, 0xf8741f6e, 0xefc3bec7, 0x89691ed6,
-	0x69f1dfc6, 0x67df26df, 0xfd5bf4e9, 0x22cbb865, 0xf03153fd, 0xfdeab53f,
-	0x5d798d89, 0x96d50fdd, 0x9438e4ef, 0x73b68b66, 0x2cefad10, 0x7b778ff5,
-	0x9fdc89ef, 0x26117788, 0x2ba976ea, 0xcdcbadd7, 0x8fe914a3, 0xef8ca9f6,
-	0x5ef209f6, 0x8151f13d, 0x4fc4677d, 0x0481114c, 0x4a1f86a4, 0xe1923d5b,
-	0x4aa1f86f, 0x9e792302, 0xda17ea33, 0xeb68e4f0, 0x851577a3, 0x53fd3bbb,
-	0x5c647dad, 0xaa7e7754, 0xb9f39769, 0xaf97e9bf, 0x183e7ee1, 0xb6e52694,
-	0x036efb86, 0x2ad80d9d, 0xab67586c, 0x4bbfebad, 0xabf3a851, 0x3d9ae812,
-	0x96ade282, 0x962fbc2b, 0xbf88c22a, 0xe46f3e62, 0xf9ea352f, 0x7dbf9922,
-	0xeab7cca5, 0xd16da7ef, 0x275820ed, 0x7a07ac52, 0x4edd36f9, 0xc5207582,
-	0x7c1df03a, 0x35f0790d, 0x90d7c1e4, 0x0a435f07, 0xa5ef86be, 0x761538a2,
-	0x0ad3f85b, 0xfc07f683, 0x72418569, 0xc169fc13, 0x82d3f879, 0x169fc3eb,
-	0x5a7f0e5c, 0x69fc3970, 0xd3f879c1, 0x9fc3eb82, 0x3f879c16, 0xfc3eb82d,
-	0xf879c169, 0xc3eb82d3, 0x0e5c169f, 0x39705a7f, 0x79c169fc, 0xeb82d3f8,
-	0x5c169fc3, 0x62996f3e, 0xd3cdb7f2, 0x5b287fdf, 0x51f4cf1f, 0x9b1c5198,
-	0xeffdf847, 0xc4fc7f88, 0x373c0e96, 0x2edd022f, 0x48f70ead, 0x904e373c,
-	0x8908b778, 0x8cd9b6e7, 0x32ecbbe7, 0xb4e3245f, 0x7e07e943, 0xf49b42ab,
-	0xdf85215b, 0x56fc290a, 0x2ab7e148, 0x2b7e94cc, 0xe15bf0a4, 0x4856fc3b,
-	0x0a42b7e1, 0xf85215bf, 0x6fc290ad, 0x2b7e1485, 0x0adf83b4, 0xf856fc29,
-	0x5215bf0e, 0xfdf0adf8, 0xfe03cd08, 0x905e632b, 0xf499fbf3, 0x9343a252,
-	0xe532ea5e, 0xd707e721, 0x5c1f9c87, 0xb83f390e, 0x707e721c, 0x707e721e,
-	0xc1f9c87d, 0xdc8349f9, 0xef20bfbc, 0xbc83b707, 0xd41f9c1f, 0xb6037be8,
-	0x2e1b49ab, 0x35b48ebc, 0x7142794a, 0x2f353109, 0x8bfc2673, 0x35254ead,
-	0x6d8423d6, 0x859980f9, 0x38f4d794, 0x66d13cc7, 0xae39be01, 0x05a6f080,
-	0x0f65c704, 0x5cc97ffa, 0xf9b3f86e, 0xbf9ef087, 0x50deb043, 0x35afdfa3,
-	0x4b847bda, 0xefd46a45, 0x2f5d77cc, 0x1ea37c74, 0x79a0cbf3, 0x8f996290,
-	0xbbfc9378, 0xaf700b22, 0x91458b60, 0x642bb8f1, 0x5d28743c, 0xe793caad,
-	0xf6cb16fb, 0x5388e1fd, 0xb83c5129, 0x156591ef, 0x80056c87, 0x7e0292d3,
-	0x562f2af7, 0xab92d75f, 0xcc658711, 0x124bb0db, 0x867be09f, 0xbd84daa3,
-	0xfd19c69c, 0xefe3b085, 0x4bb44c73, 0xa0ed0279, 0x29f40e6f, 0xf4414dde,
-	0x9e4f2cbd, 0xb6ef9a7b, 0xfbe9cbab, 0xae4b6dc0, 0x89c5fdc6, 0xd3ddb2e1,
-	0x386689bf, 0xf8506e4e, 0x6da8ce9e, 0xc9fb8bc2, 0x3a7e75cb, 0x5ecb9b70,
-	0xf8bae3ce, 0x6fd1a3de, 0xbe5486c9, 0x5a2259a7, 0x450f710b, 0x3df8550c,
-	0xb46e037c, 0xbeb1d7be, 0xb02ada2c, 0xfbe0ff2f, 0x7e2e244f, 0xa34ffb9f,
-	0x2116c687, 0xcb3450ae, 0x0d2742f7, 0x83d9592d, 0xe5f9a5e6, 0xbfa3a17b,
-	0xe706f258, 0x85ef929f, 0xe70cf932, 0x9879f1f9, 0xfdf853ed, 0x8dbec995,
-	0xee370496, 0x25b72f65, 0xe136fea2, 0xf5055881, 0x8d8af708, 0x168ae575,
-	0xbd01538b, 0x41f10388, 0x639c47f4, 0xdf25e83a, 0x59f7e363, 0x365d58a6,
-	0xce431bf0, 0xb1c97129, 0x3151d48b, 0x4432cf7c, 0xd0d4b84e, 0x7e62e383,
-	0x3b4e9c78, 0xba5fe7df, 0x8572c9d3, 0xbe615eb6, 0xc65f3e79, 0xf6dd56bb,
-	0x7a4b70e1, 0x99ce9c67, 0xbc16ff34, 0x7d267b03, 0x8508f47b, 0x79bd88e5,
-	0x0da3d704, 0xcd3df12f, 0xf06f9592, 0x0d4b943d, 0xfbcb450f, 0x52ffd26c,
-	0xb0cdc3ae, 0xf1d7cd3b, 0x69c7ae53, 0xef93ab1d, 0xcc39d33a, 0x6a5caeef,
-	0x119cb1b0, 0xf21a2f2a, 0x911ef1a7, 0xc23fae10, 0x60d153ce, 0x0bc03be3,
-	0x4aac94d7, 0x91ca5712, 0x7339758b, 0xe38d8351, 0xf7f42ab2, 0x6eff42d4,
-	0x1e3d62cf, 0xf356f16b, 0x42f24ff7, 0x7de350e4, 0xc94ebd4d, 0xb06607db,
-	0xc6c4b43c, 0xcb39cdfe, 0xb6247ca5, 0x93ee3f0b, 0xce3e59cc, 0xe666f782,
-	0x947af4ec, 0x5de9e82e, 0xd89a4e5d, 0x4ff864ea, 0xfcc11cb9, 0x14e5ea65,
-	0x397cdfce, 0x9799d399, 0xee2adc65, 0x5a6e8122, 0x073be48b, 0xd1f2ebef,
-	0xc6b1c40c, 0xc9eb3e43, 0xf44eddf4, 0x74f2218d, 0xabc035be, 0x3878801c,
-	0x44ada6d1, 0x8dc4ec9c, 0x4d83ef82, 0xfd451c82, 0x155c82cf, 0x5691fd8f,
-	0x2661f7c4, 0x68bf7c28, 0xf4dbd0d2, 0x43fb40fd, 0xf7e13f30, 0x29c2b457,
-	0xcd39c47e, 0x805bb6d2, 0x685f637f, 0x5efca3be, 0x629f24ea, 0x9a923bc7,
-	0x741b6fae, 0xe63fba1f, 0xb276e846, 0xeb076948, 0xb26193b0, 0xb7c92478,
-	0xd3e4266a, 0xf66db0b9, 0x608109d2, 0xcb2b951f, 0xd576fc7b, 0x419206cc,
-	0xc9fb55ff, 0xde458b1c, 0x9039233f, 0x96880bef, 0x2f949ea2, 0x4014a359,
-	0xf5e6323f, 0x38ec67b9, 0x3a4eb0cf, 0xa7d8ed28, 0xd2e51ef2, 0x7e4d327b,
-	0x8cb4d09b, 0x34fd8de0, 0x27f5a637, 0xf468610a, 0x1c2de160, 0x85ebf781,
-	0x005428f1, 0xe8b798f1, 0x3bc1eaf9, 0x973ab4ff, 0x91f9c4e1, 0xa6687dbf,
-	0xe05ff22f, 0x6b147393, 0x4b1bdff0, 0x0d5768b2, 0x50f7c1ee, 0x11bf03c7,
-	0x9efc6db9, 0x4bb64a44, 0x7b10a9f2, 0x8960f54b, 0x4bbb50c7, 0x773cae59,
-	0x7a9dd584, 0xdc7bfb2b, 0xd634b76c, 0xbe66cc7d, 0xf3a46be7, 0x5ee7eb07,
-	0x9ee7bfdd, 0xf916c3ca, 0x1663c2fe, 0x8857f6ff, 0xd0f72f5e, 0x8fbd6066,
-	0xe79ede21, 0x8cfaf1af, 0xf83a4cf7, 0x896efe95, 0x96474f41, 0x2afbe25d,
-	0xb77691a5, 0xe54f441a, 0x0fbe15ab, 0xde4cba5a, 0x2b56d6e7, 0x6e845df2,
-	0x99bf58ec, 0x9efcbffd, 0x117e6fd5, 0xf8750b2e, 0xbcb7b1ce, 0x84eb48e1,
-	0x3d979fef, 0x347c9360, 0x0efb8990, 0xf2712cb7, 0x7b9fd9bb, 0x0f06ab8a,
-	0x8c3c9e03, 0xe5d871a7, 0x8c4b7f54, 0x4bdf04b6, 0xd841cb45, 0xfcfee71d,
-	0xba8f7e6d, 0xdf8d39b6, 0x95d92cbf, 0xd9ef0abf, 0x7ed1ee7c, 0x4497f582,
-	0x4790ecba, 0xf9621a6a, 0x53db9e7c, 0xda2bcfbf, 0xe067cfd8, 0xd2c1bee7,
-	0xbe7d778e, 0xaea2e71c, 0x6cc01157, 0xbaf54c53, 0xf61a63b6, 0x4b3b50d1,
-	0xdf21bbe8, 0xdd815765, 0x5f641ec4, 0xb632ec35, 0x71b3639c, 0x77b1cfae,
-	0xf73ef7fd, 0xf437f3ea, 0x7a1df9da, 0x9ef8ee6d, 0x2ad7ff90, 0xcbd3d82e,
-	0x7133dd23, 0x90fca1bf, 0x62b4910d, 0xbe5b9c62, 0x7c8f731f, 0x8ef4a63f,
-	0x7367e67c, 0xdc029380, 0xfbc9193b, 0xe94fdcb8, 0xfbf7ee90, 0xf40f6bad,
-	0x0a7a0dd9, 0x821df978, 0x1ed79772, 0x951f2417, 0x77a62a35, 0x0bfc8c24,
-	0x97c95583, 0xfc00dd48, 0x9a477c7e, 0xcd396f1d, 0xf1093121, 0x27417b99,
-	0x51db3ac3, 0x993f8e3d, 0xca0e2e98, 0xfe14bdf7, 0x2f18e4bb, 0x955beff8,
-	0xc3df9a36, 0xdf2cfaa0, 0xc51c1aed, 0x68b895fd, 0x5d4869dd, 0x03824f3c,
-	0x3eeda9c3, 0xe3cdcfea, 0x02ca3e30, 0x07ec1b7e, 0x42f71073, 0x7e5c5bf9,
-	0x6d29c61b, 0x68d4ef90, 0xda38e46b, 0x20fb58ea, 0x975607c8, 0x5cb04fbd,
-	0xbddf20d8, 0xddffa39e, 0xcb2f9a11, 0x2704e5cd, 0xee33b3dc, 0xabc286dd,
-	0x797f9f44, 0xce59ac63, 0x036b5c6c, 0xf377667e, 0xdd39c65e, 0x30da5d0e,
-	0x2837df86, 0xbef97ab7, 0xfbc3a68a, 0xf79cdbb3, 0x7b325fc2, 0x34b623dd,
-	0xb065ffca, 0xe9cf6b94, 0x7a6271fb, 0xa9df9320, 0xf1c9cdba, 0x8d5db3e3,
-	0x780edebc, 0x81f0443f, 0x662ae2dc, 0xf89d1378, 0xbe596f10, 0xcedf8cce,
-	0x77c944f9, 0xf095d7fc, 0xd5605bfe, 0x79e0aeec, 0x8997dfac, 0xb4d9a1f8,
-	0x970ef1ef, 0x1f7c6970, 0x3343c4f6, 0x6205eff9, 0xe6cf1c9e, 0xbbc78f71,
-	0x4c374453, 0x18fd06d7, 0xf18df3f7, 0xb4ab1eac, 0x6bbe7bc7, 0x420f7a9f,
-	0x7c27af4e, 0xddd00fc3, 0x02e3b53e, 0x2f6b8d26, 0x5e07ef97, 0xfdf4efc1,
-	0x6a01fffa, 0x00d36c91, 0x0000d36c, 0x00088b1f, 0x00000000, 0x7dedff00,
-	0x65555c7b, 0xd6bbf0ba, 0xc0d857da, 0x51b08b66, 0x62020dc0, 0x10106d11,
-	0x80a17515, 0x636a735b, 0x8dc42937, 0x910150b7, 0xf39fa8ac, 0xa96f0db1,
-	0x962a2695, 0x8da6b675, 0xb2707595, 0xd99b1b46, 0x0f5d9a6a, 0x39d38d3a,
-	0x32cdb653, 0x34d209bb, 0x99d37d9f, 0xde79e7be, 0x0daf60b5, 0xf9a675a4,
-	0x3efcefce, 0x7df5e3fc, 0xee7d7bd7, 0x765ef3cf, 0xb24c6322, 0x98783631,
-	0x8c81b183, 0x45931819, 0x77a13fc8, 0x6302edfb, 0xbeac7195, 0x28d2132d,
-	0x0b6bff56, 0xdfe3df63, 0xa2749ef8, 0x8f2c6453, 0x5da0dbb1, 0x10af7c1b,
-	0xd6ccabd9, 0x29d33df3, 0x148af7d0, 0xd41dd336, 0x7ec3fb1e, 0x13efd5e3,
-	0x338b69fc, 0xe3abea7b, 0xbb78d856, 0x9a7ed0a9, 0xdd8beb05, 0x3ea81bf5,
-	0x26e9b3cf, 0x3632c591, 0x87ff04db, 0x7b4894a5, 0x32e6c456, 0x7057b0d6,
-	0xe1a8a11a, 0x18b18941, 0xf08b9f48, 0xbec664b1, 0x3bcdf868, 0xcfbd40b7,
-	0x64af6f37, 0x35e67b43, 0x398a3fc7, 0xf7363046, 0x0c733652, 0xa5de6c60,
-	0x0f569431, 0x073864f3, 0xf8dbd506, 0xc607ba5c, 0xfb2dadbf, 0x5a307fdc,
-	0x30e59fb7, 0xbf73fef6, 0xe868e3fd, 0xde9f3197, 0x3acf4d7d, 0xa13ead66,
-	0xc304b2af, 0x4d73af8d, 0x83155746, 0x18b6ce79, 0xcd14121c, 0x64c55e5e,
-	0x33b32798, 0x13e41a67, 0x422bcc75, 0x16fd6cbf, 0xf3eb04d9, 0xb557fe30,
-	0x5da9905c, 0x824fbe63, 0x7a860cf5, 0xdf5e1cc6, 0x58f7f00c, 0x4884670c,
-	0x912de8a8, 0xcdbc1903, 0xf83d29f7, 0x21a90c1d, 0x89ef07a7, 0x5ecc1d0a,
-	0x7b6d0657, 0x330305f0, 0x65eb0f96, 0xfceaae1c, 0xbff32aa7, 0xfb20bd6d,
-	0x4e0ddea0, 0x2757cf07, 0x7ac1e61b, 0x364face7, 0x5cb486cc, 0x473e5ef9,
-	0x2f8dde5b, 0xccaf8aab, 0x4f587695, 0x57c71b57, 0xe13d3ad7, 0x2f4f6bab,
-	0xa931257c, 0x00771e67, 0x8e00d8be, 0xe382362f, 0x57c0530b, 0xa82f33a5,
-	0x7c70bfde, 0xedfe7ecd, 0xd0765e0f, 0xceffa8fa, 0x1dbe8d07, 0xb6acffd0,
-	0xf2b784bd, 0xc9f41bd5, 0x99ceaf50, 0xdb51704c, 0xb6cfaecf, 0x6de78032,
-	0x1debb7ab, 0xe8eefc16, 0x9521ee93, 0x413f1059, 0x6790099e, 0x3bbc40ba,
-	0x397ea7a2, 0x9c617ba4, 0x91cd8b25, 0x719edaec, 0x3cf428b6, 0x86da3ebb,
-	0xafaecde3, 0x7165887a, 0xf66777fa, 0x66b3bfe6, 0xa0b317ce, 0xb3cfe43f,
-	0xe424ce45, 0xd4510a8b, 0x3e9a9bf0, 0x79837884, 0x35e0063d, 0xdbc3fe23,
-	0x0c38469e, 0x6ce6145e, 0xa9a94f86, 0x8b8e1f01, 0x36f38cf4, 0x826bcc88,
-	0x8135a97a, 0x548f388b, 0x876c28a0, 0x528d8469, 0x1df90b16, 0x4802ed30,
-	0xee9e2453, 0xc3f5f273, 0x677e3f77, 0x5c3c8131, 0xa1cf4abf, 0x3b606af4,
-	0xfe00a757, 0xd9cc310d, 0x4fa1e8ec, 0x3e951fb5, 0x6fedfa55, 0x70ae7b7d,
-	0x3993677d, 0x3386593c, 0x56e304c9, 0xb9cc3c3e, 0x3afcb846, 0x0f00610d,
-	0x817ad05b, 0x7d6c0b58, 0x903537ac, 0x0fcd7657, 0x24a5b7ad, 0x86f58fb6,
-	0x93e553ae, 0xc3ce2639, 0x015127c0, 0xfad77798, 0xf10c51a1, 0xca2f302d,
-	0xcd8bb39d, 0x5d5bce22, 0x504d53d7, 0xbbb6e619, 0x33e944c9, 0xc368c04d,
-	0x764d3e00, 0xe4df3fca, 0x29adb4a0, 0x9ddbca83, 0x633f9a36, 0x80698881,
-	0x85308aa7, 0x8f3cfdff, 0xe54165e5, 0xee9c6d53, 0x11035b4e, 0xfd3920b6,
-	0x0d79bd71, 0x0efa428b, 0xccfc883c, 0x5db2871a, 0xf5e9d430, 0x4cc42367,
-	0x3f3e4fa4, 0x7d12ddb5, 0x163fc927, 0x02ec7061, 0x24b19b96, 0xe02374fb,
-	0x38f2ee6b, 0x9b129027, 0xe49438d1, 0xb46f0cc2, 0x7eb00093, 0xcc78430b,
-	0xf860e453, 0x2395aa92, 0xb26b7eb1, 0xe6718055, 0x5ae79c5a, 0xced5fda9,
-	0x4b7bf1fb, 0x93252199, 0x9026caaa, 0x72287763, 0xdcc0896c, 0xa07787c8,
-	0x12fe449c, 0xfea2a50f, 0xf055a3b9, 0x56cf291b, 0x21d7000b, 0x78d2eecd,
-	0x055b1394, 0xbb6c0ee7, 0xa9a9e40d, 0x0d769e47, 0x7a817f73, 0xf4077d81,
-	0x255ffd07, 0x5d710220, 0xca1c726d, 0x75824df1, 0xb979c317, 0x059f080d,
-	0x6e9c9d0a, 0xc8e11339, 0xa3eb81ec, 0x65105ff8, 0x288b23cc, 0x3d141b6f,
-	0x79406486, 0x310e4e45, 0xca41f870, 0x3a3f11da, 0xa0e909a7, 0xc51292cb,
-	0x886f28fa, 0xf2c38948, 0xc912ad39, 0xaa9e9545, 0x7c2835d5, 0xa3be1733,
-	0x2a912bde, 0x56be9162, 0x74a44cb6, 0xcd9286ce, 0x24e3a05e, 0x9a3b1dc1,
-	0xb867a3d6, 0x13b5399e, 0x55bc47af, 0x9b4630ef, 0x7a496f00, 0x104e526f,
-	0xbed9ce3f, 0xbb41892a, 0xd3cddbf3, 0x5b17fe51, 0xa1a38acb, 0xd16dbcfd,
-	0x1e9052d9, 0x7ae6ca49, 0xc4ed4164, 0xacf00638, 0x2791fbf9, 0xe78fa0ac,
-	0xe8569f42, 0x70b69bff, 0xd4aa179f, 0x924fed34, 0x31dee780, 0xa1b3e279,
-	0xe0f142fe, 0x1f50a32d, 0xe2a7be08, 0xce23bea9, 0x503c87da, 0x0fc073d3,
-	0xdaf7a00e, 0xf51ef5ff, 0xd6f895f3, 0xbed0e5f5, 0x4885f6a6, 0xa6e167ec,
-	0xa15be43f, 0x49e8a0fc, 0x173ffec3, 0x45653fb6, 0x9edd6c02, 0xee7c7a85,
-	0x4f28b4a6, 0xf917f21f, 0xbd51f100, 0xaaf8205f, 0x517c33e5, 0xc7bb8406,
-	0x4c560ccf, 0xf480ccad, 0x8d625e7e, 0xf6a80f68, 0x323e5a8c, 0xf3adcb9b,
-	0x9093eb51, 0xb53fe64e, 0xccf50925, 0x5f3c1167, 0x6fadd4f1, 0xecf2dca0,
-	0xaf101a34, 0x38331d1e, 0x41799f51, 0x551d22bf, 0x93c6ff03, 0x04ae61dd,
-	0x0eca2a7a, 0x6fceb827, 0x51fa411d, 0xa77c179d, 0xcc74cff2, 0xd218f385,
-	0x748d99dc, 0x7f9d67ff, 0xcff3e22e, 0x17a766f5, 0xf5cd99f1, 0x4bd79fdb,
-	0x05ee58a5, 0xe47b4186, 0x885febcf, 0xd8f4b548, 0xfbd2256f, 0xd67684b2,
-	0xea36428b, 0x76ccf0ed, 0x1bb22cc3, 0x9d59d118, 0xc359d395, 0xe0e97d01,
-	0xa8c7b218, 0x37e746a4, 0x05af85f4, 0x9dd5bd8a, 0x80d7b7df, 0x87b3527c,
-	0x6d3511db, 0x508ec867, 0x855a92ed, 0x39ee179f, 0xda857643, 0x871f6eae,
-	0x5e3eed4b, 0xc801955e, 0x80e5cd1d, 0x0aba4200, 0xfbf905f1, 0xd3d7f5fe,
-	0x7bf26997, 0xb5df7f29, 0x750f2e56, 0xb7a8499d, 0x349c64d6, 0x976bfe20,
-	0x5e42fd2b, 0xbcde341f, 0x2f0481ec, 0xc16a1f2c, 0xfd8d0ef6, 0x9a2fbb50,
-	0xc36bfbda, 0x97bea356, 0x4c3a2ceb, 0xa42d6b9b, 0x8bd5b7ff, 0x9c5cba19,
-	0xed13985c, 0x916183b9, 0x07472859, 0x06653c2e, 0x3b6a0248, 0xbe50888f,
-	0x2f73ca3a, 0x031c67d2, 0x6f5090ae, 0x5fb405f8, 0x74f95e3b, 0x6e3ff604,
-	0x066be048, 0xbf0bd753, 0xf20c5e9b, 0x2d981964, 0x06671f64, 0x0f1d2046,
-	0xf4e5cc3c, 0x1ab67ae3, 0xb9d31bf5, 0xf72834d9, 0x3c42dca3, 0xdbe61b7f,
-	0x1dffff05, 0xfec60ff3, 0x143fc999, 0xd0a4bddb, 0x5968dba7, 0xaebcc02d,
-	0x8359ea1e, 0xd041be4b, 0x222d935f, 0xac34a40e, 0xdfe7a1d7, 0x82757b55,
-	0xc113a722, 0xc8bb408e, 0x416ec830, 0xf3366e3a, 0xccb209f5, 0xf71e611a,
-	0x8d9e1e67, 0xa76d7a7a, 0x9d611989, 0xc8c33a13, 0xe41c4d7e, 0x6cd6bd22,
-	0x2dbd224e, 0x02ac7438, 0x14ce1fea, 0xcfac3afd, 0xcfac3e4c, 0xae76214c,
-	0x9db19668, 0x6fb5f070, 0x960fbe51, 0x82891e2e, 0x47be0df5, 0x9d433670,
-	0x8f73aeca, 0x15a41bff, 0xfdec7697, 0x2dff4857, 0xe113b3ca, 0x75cbba7a,
-	0x5ba803c6, 0x39336d6b, 0xc160deb9, 0xef7838eb, 0xb13691b7, 0x9d1d7e67,
-	0x4dfb9ee7, 0x2726a62e, 0x07099fea, 0xa11fd225, 0xc3b0e9f3, 0x3d5287c4,
-	0x2c3b3bb2, 0xb0104fa2, 0x70f791fe, 0x164c137e, 0xbaf684bf, 0xb065ff49,
-	0xc48e617e, 0x935773e8, 0x83df614a, 0x938b1091, 0xd1747d47, 0x38eb7642,
-	0x3a550f85, 0xdb9b2b7b, 0x72296f8f, 0x73338555, 0xaf582cc8, 0xd66cf0a8,
-	0x1022faab, 0xf87b32ce, 0xaf529176, 0x932892eb, 0xf46d5e1d, 0xebb2e831,
-	0x33d250e0, 0x3fd9c9fd, 0xf601dda0, 0xf954f2c4, 0x5327845d, 0x0acdeef4,
-	0x2dfd54fc, 0xacdffd29, 0x8b66f1c0, 0x5376e1c8, 0x7a14dc08, 0x1e97a50a,
-	0xdb41887a, 0xeccf1ba3, 0x51a3f6be, 0x6bdf84c9, 0xfd78e61e, 0xedfaf090,
-	0xcd802b5b, 0x4dbfa0d8, 0x0cfefc21, 0xb98bf578, 0xedaf023f, 0x9bf578a1,
-	0x375e2187, 0xa0676489, 0xa376881d, 0xb5c0e507, 0x60f6e794, 0x51392306,
-	0xd7398529, 0x8077e324, 0x87c91643, 0x541f28a3, 0x15c430b9, 0xe9f506b8,
-	0x71e57069, 0x8db1017e, 0x10a4e797, 0xf6b0245d, 0xbc072c78, 0x277da1e7,
-	0x7e668699, 0xe5b7720c, 0xdfdedf01, 0x82cd3f40, 0x983ceb6f, 0x8b66f78f,
-	0x0eb7ed13, 0xc3d5e89f, 0x59a25a3c, 0xbf187ed6, 0x4e55fe65, 0x4533962f,
-	0xf8374c6e, 0xef837ed0, 0xbdf88d49, 0xe97f7f9c, 0x441f67ef, 0x8d33acfb,
-	0xb25abad1, 0x67da3a59, 0xf419652d, 0xdcaab7fd, 0xb7823079, 0xddf4e32f,
-	0x43e6df32, 0xa3e8f43d, 0x27a8e1be, 0xf1cbb65a, 0x510d4836, 0x981cf89e,
-	0xd38920ff, 0x94324b7d, 0x7059ba43, 0x7ec5cf97, 0x0df3e1ae, 0xff3d8794,
-	0x4e657414, 0xe506d105, 0x76231ba7, 0xe9555ca0, 0x2e30f074, 0xcf7887df,
-	0x7938456c, 0x7a8cb027, 0x8543ffe8, 0x0bf854de, 0x008d36c0, 0x3c1098f7,
-	0xa31774a8, 0xca585fc0, 0x413bcfe9, 0xf31d4f59, 0x0091bfa1, 0x38070953,
-	0xf0c11a57, 0xd5967483, 0x6ff38d93, 0x91f80c5e, 0x0f1c1d70, 0xdd5645a7,
-	0x155f07d6, 0x0df128e6, 0xa6f90218, 0xa9be7192, 0x7a42ba44, 0x0aba046c,
-	0x481647a2, 0xae173e88, 0x83ca15d0, 0x1cb8f708, 0xc257e758, 0xf0b1f21f,
-	0xa694ffad, 0xa4ce35f7, 0x1e2f2e1c, 0x734a7b33, 0xd04def48, 0x656f9dd8,
-	0xfa889a7f, 0xafbdf4e5, 0x149a6025, 0xeb8c9ee5, 0xd7fe5cd8, 0x1fff1452,
-	0xb8f407c6, 0xffcb0f8e, 0x2dda224f, 0x235f4b95, 0x79d2bffa, 0x37989996,
-	0x5d1ee01c, 0x00fd382c, 0x462d79bf, 0x16f824e7, 0x0c755c57, 0x6ad659e1,
-	0x56911874, 0x1c8d62d8, 0x408f2b3b, 0xda1d8a37, 0x39ba246a, 0xf4894bf7,
-	0x8b92b9c1, 0x0f800eaf, 0x4e0856e7, 0x32d657ac, 0x3790256c, 0xa816292b,
-	0xa057995e, 0x1ca9657a, 0x051a275f, 0xaf4037a2, 0xde283b25, 0x8ef5a731,
-	0x13df88a9, 0xa40f5fc5, 0x187ac1f8, 0x2e63e547, 0x959e48de, 0x56abf529,
-	0xbb47911b, 0xacb597bf, 0x3ffc88ba, 0xde521bd3, 0xec53e93a, 0x5b51acb7,
-	0x8235c6ee, 0x4e57771d, 0x07ca0c44, 0xefce64e6, 0x40f24811, 0x93fa0ff2,
-	0x447140bb, 0xc20f30cf, 0x61bc89c3, 0x99eba47a, 0xdba05708, 0xdd7ca5e8,
-	0xbe0aa733, 0x99ceb049, 0x1f67ce16, 0xfbbe0996, 0x09ff3e05, 0x5065ef40,
-	0x5d740b1e, 0x38e4c316, 0xe626dd48, 0x2e79c70f, 0xca09f61d, 0xd438d3db,
-	0x8fefaa28, 0xf75ca1b4, 0xb78911e8, 0xe5a52f32, 0xede947cc, 0x98f34fcc,
-	0x74933ac1, 0xfc93af90, 0xf38e312b, 0x0367b32b, 0x8b5fd7d2, 0xe0169c4e,
-	0x4239ddfb, 0x439428de, 0xdd68038d, 0x701f5b97, 0x067680a5, 0x5fac41aa,
-	0x147ee396, 0x4ccab3fb, 0x74ab718f, 0x995a8e95, 0x17d61537, 0x9be2debb,
-	0x6b8beb04, 0xf5c21cf5, 0x38374fa6, 0x1383ef10, 0x74133af8, 0x543f9fdc,
-	0x81a3606e, 0x183f360e, 0xdb3a43e6, 0xda2035bc, 0x03e6fea1, 0x97cc0180,
-	0xf0bc14af, 0x4e61eadd, 0x7559d38c, 0xfeed111e, 0x188f56a2, 0xe1a7e208,
-	0x394441b2, 0x23d3be91, 0x5ab49ea2, 0x353d53d7, 0x4fd4ac5f, 0x59067937,
-	0x4e9e4ec9, 0xa15c33f4, 0xd49fb51f, 0x045f8356, 0x4ac917b8, 0x57b7997d,
-	0x9e8a61fb, 0x3961db56, 0xab7a67d2, 0x453f4fa3, 0x3f505b4d, 0x08f88f83,
-	0x7bd205c6, 0xfd711fca, 0x1bf084da, 0x36abf378, 0x2103374c, 0x9d1c71f8,
-	0x79e34cc7, 0x15d33cf8, 0xbfbf87da, 0x63e38f7f, 0xb9bbf01e, 0xe422fef5,
-	0x1f00cda3, 0x9de6f3c4, 0xcfd4ccb3, 0x799a59f4, 0xf286a931, 0x4b070825,
-	0xa23c75ef, 0xd53d2fcc, 0xbd695a23, 0xe76843ce, 0xe28ccba5, 0x763f6a01,
-	0xf405741d, 0x857a776a, 0x90cbcc7a, 0x47b8945a, 0x4eb38e3a, 0x5d31ff40,
-	0x6b4957c1, 0xf63361fd, 0x5f1466e3, 0xfe85cf4c, 0x8426fea1, 0xfc37a183,
-	0x5e99e742, 0x4273e7cc, 0xf18edfa9, 0xe76c7494, 0x74431158, 0xd5d7e7c5,
-	0x1c6214ea, 0xa08fb197, 0x7e90c9fd, 0x0cb8c29e, 0x7e4ecfa4, 0xb42e4a6d,
-	0x97d1fe7f, 0x52d0b476, 0x0fb33e0e, 0xf5ab56e5, 0x9c709be6, 0xff9f2283,
-	0x5de2724d, 0x206ddf98, 0x53be9a3d, 0x7944db4e, 0xebfd1393, 0x55df56ae,
-	0x2cbd422f, 0xeb64c618, 0x0a138f3d, 0x3a15da9c, 0xcb793938, 0x53ef5c20,
-	0x582c7745, 0x5f87ed02, 0x3b8d38f7, 0x94fcca7c, 0x9b0fc816, 0x30abcbf8,
-	0xc78e5f7f, 0xfee4023c, 0xde5fd2b0, 0x6ae50fb6, 0x821cfce9, 0x4576c597,
-	0xda39a9f2, 0xbf02f5e3, 0x52dc4737, 0xd2b8fc8e, 0x24487066, 0xfa19eb77,
-	0x7711cd59, 0xe5bfb1db, 0x4c26f9d1, 0x36bfd60d, 0x6e3c9ca1, 0x1e2131c9,
-	0x18132d9a, 0x0aaceb96, 0x4f1bbe9e, 0x885240fa, 0x73847772, 0xe5744cba,
-	0x0c272864, 0xbcad0609, 0x2f7971d6, 0xb43e1dd9, 0xf5acba9f, 0x60cc8148,
-	0x7ca05409, 0x69795493, 0x3c717a71, 0xa3b4e2c9, 0x9142b4bf, 0xaf862c37,
-	0xf73960d3, 0x5eaf389f, 0x962e63fd, 0x867f4b50, 0x4128ccb0, 0x9bda3ff9,
-	0x573e10c6, 0xbbc58353, 0x6844f518, 0x70205d7f, 0x4fa38e50, 0x7e337647,
-	0x5eddee48, 0x7a341bb2, 0x7a5e5ba4, 0xf221f5a2, 0x7a811e52, 0x792058a2,
-	0x0ceb61e9, 0x0c12feb8, 0x3c5c00b2, 0x545eb8db, 0xce267bf9, 0x49e5f005,
-	0x5e5c9165, 0x2673e4e9, 0xd1efc60e, 0x452a5cae, 0x5e021e22, 0xc3e9e0c9,
-	0x9378f79f, 0x9d1e507f, 0xa987fa41, 0x21fe9007, 0x0fe144fd, 0x6f078a8f,
-	0x50a3f5d9, 0xd912cb5f, 0x85cb9503, 0xe2cfb436, 0x6947d1bc, 0x2edcc5be,
-	0xa6bf9768, 0x892a1cf5, 0x7979444b, 0xc799d962, 0xbebd41ef, 0xfff49c29,
-	0x5667a5a4, 0xa66e3c60, 0x211a7057, 0x7d1a59ef, 0x6f987bf7, 0x905d3a34,
-	0x81f0ab3f, 0x914597fb, 0xb8084f68, 0x759e8cce, 0x83321656, 0xf139e29b,
-	0x3b409633, 0x34e0a34f, 0xa1e07a3b, 0xef527ac7, 0x37bc05f5, 0xfad0fe46,
-	0xa8d7bc3f, 0x3e7759c8, 0xc6a2d9ca, 0x700a87e4, 0x7cf5eb5d, 0xd7d18d9e,
-	0x3927de53, 0x1cb97639, 0x3fd8a99e, 0x57b3a59e, 0xc0f7c3c6, 0xcef9416a,
-	0xc8a956f1, 0x88e340e5, 0x0d3f1863, 0x3e48172c, 0xa252bc79, 0x5ccdda1f,
-	0xef784d9e, 0x5d900a28, 0xb43de5d8, 0x722b5a92, 0x3674a3de, 0x94588c17,
-	0xe3dfa76f, 0xfe479ffe, 0x9bb62563, 0x83b5a2d3, 0x0cfd0226, 0x67bcb840,
-	0xf1e9fd26, 0xefbad196, 0xea6945f0, 0xd38ead55, 0x8bab3de4, 0xe7b0c7ae,
-	0x52277bac, 0x3992af3c, 0x2ade9122, 0xc1376e65, 0xe61b259f, 0x4f9d5733,
-	0x2ac7b731, 0xa27ec18b, 0xb07b5aef, 0x3389fec7, 0x78a8df20, 0x3a13f154,
-	0x19765eef, 0xacd076e3, 0xdd7ada75, 0x16301076, 0xe5caba8a, 0x32bf76da,
-	0xb9459fbb, 0xe038dee8, 0xaeabf21b, 0x80821e50, 0x266e7f21, 0xa61f71e3,
-	0xced543e8, 0x517a592f, 0x6668728f, 0xc23d45e3, 0x1fd2e673, 0x385fa7e6,
-	0xa1bef3b5, 0x3ebb4a20, 0xbf934e39, 0x534435d1, 0x30f766ff, 0xa75bf7cd,
-	0x5ef9ab5f, 0xc9a919ee, 0x5e3d5edf, 0xfd467f53, 0x7a1cad24, 0xa3d69a37,
-	0x79bfa7e2, 0xa3e8a5bf, 0x12ec4277, 0xe23a9d35, 0xbf91133f, 0xe4672c3f,
-	0x33787cbf, 0x1d31f8d3, 0xe7822423, 0xf93d5c80, 0xc8e5f731, 0xbf208fef,
-	0xa1f44fc9, 0x7343f3c2, 0xa228c9a1, 0x7ee4627f, 0x725fa879, 0x5e503990,
-	0xfdb1d4ce, 0xff8f5442, 0x9cf30e67, 0xe3bafec7, 0xf10f4b0d, 0x1f884378,
-	0xff78a573, 0xbfcc0670, 0x4d79790f, 0x16c3f72e, 0xffaf36ee, 0xb58e0838,
-	0xfc9ad16d, 0xebf1fda2, 0x3bd60e3f, 0xae1d044b, 0x93e146b3, 0x7da0165a,
-	0xa0e8bb52, 0x40c4eafe, 0x583be62c, 0xf4b46c67, 0x0a8b838f, 0x258f800f,
-	0xa9de2837, 0x193fc3fa, 0x9e0a453e, 0x1a70b4cb, 0x90e3cb93, 0x29108f5f,
-	0xc7239cdd, 0xf103fee7, 0xf49eb41c, 0xdc7fbcdc, 0xc847227a, 0x9f9f0859,
-	0xe3dfaf1b, 0x17940f1e, 0x7f0b908e, 0xfe4cb826, 0x47a5c247, 0xd82f47cf,
-	0x72a3fa0d, 0xfdfb819d, 0xbf5c33de, 0xfefd7237, 0xf68fb47c, 0x44f39b87,
-	0xed070ee7, 0xe93ed297, 0x618d7ba1, 0x59df1819, 0x797d23a1, 0x8190997a,
-	0x2126c2fe, 0x0f36fc8c, 0xc81648ab, 0xc878b9be, 0xaa31fd48, 0x3afded07,
-	0x0551f390, 0xe4096b3e, 0x71e5ccdf, 0x716e35b1, 0xf5038a4a, 0x1eac1ff6,
-	0xe27a8b8a, 0xfd9e1e11, 0x696be130, 0x2bee45df, 0x6bd0127e, 0x8512d1e5,
-	0xd5cc5f8f, 0x2e1f3ad1, 0x949db914, 0x1f70ba2a, 0xa9d81563, 0x96065768,
-	0x915f28eb, 0x6d59e9c7, 0x9d0a1ff7, 0x14dd94c7, 0xda88f386, 0x7d7dba24,
-	0x2e51fb8c, 0x793d0f8f, 0xb3ed1857, 0x68742a01, 0xd6bddbef, 0xaf582e69,
-	0x8d96d0bd, 0xdcdadfb6, 0x4d6fea68, 0xcf159746, 0x748cfca1, 0xfe8eca78,
-	0x8cfac0a0, 0xe655cd33, 0x580feeab, 0xe936fe94, 0x9da2bf41, 0x1e289822,
-	0xf91af161, 0xb16715f9, 0x1ccade26, 0xa76e0b02, 0xf428f3d6, 0x1b42c76a,
-	0xeff697e1, 0x5db178d5, 0x1ba417a1, 0xcf4abbc4, 0x8983fda1, 0xe9cc8dec,
-	0x15d9f389, 0xe51a8e52, 0x8f748dd9, 0x1f90eafd, 0x07fe5cbc, 0xe3c4be6e,
-	0xded7de2c, 0xe18879c3, 0x0c9c525f, 0x5fce4aec, 0xbee2434b, 0x024f913f,
-	0x40cf0e66, 0xde1e5684, 0xdac9d0ab, 0x48de827f, 0x3ebc02ba, 0x8fe5cb9c,
-	0x36fdc0ab, 0xb2c73bca, 0xfba230d4, 0x96270b1f, 0x51384560, 0x3872ba5e,
-	0x1f3df379, 0xcc749e10, 0x7f71b46f, 0x72e1f90b, 0x31c2a47c, 0xbe9e6449,
-	0x3c88f2f4, 0xca1bfbe5, 0x6ab7ae7e, 0x61d90fc8, 0x02c57728, 0xcc2cd2c6,
-	0xffb6bc61, 0x8f9c0e7a, 0x396ae885, 0x96aee5d2, 0xcfe43094, 0xcabc6564,
-	0x0ca7d29b, 0x205fa077, 0x040ed018, 0xe3c0c3bf, 0x574edc3f, 0xb94f7ae5,
-	0x72c47ed6, 0x1f8f664f, 0xeaf7daa6, 0x82973c77, 0x59f3aae3, 0xfd61d8a5,
-	0x125577cd, 0xdca2724b, 0x808f765a, 0x5ab1dcf0, 0x717df8d4, 0x0325615e,
-	0x7fce3e3f, 0x8efd13af, 0xcdafb038, 0xf575cf28, 0x5e083382, 0x0a817b81,
-	0xf8871338, 0xe24fe02b, 0x8967bd3a, 0x57c7425e, 0x85abb1d7, 0x5de71b8f,
-	0x9f90c82c, 0xa02f5154, 0x9956b7df, 0xa3055c7f, 0x3e9969ef, 0x9e21e301,
-	0xe38a5616, 0x03335655, 0x332af5c6, 0xf2865399, 0x7443c6ca, 0x02b9edde,
-	0x206f2539, 0x4f3a4fc9, 0xa4f02ae3, 0x4d1d01e7, 0x7643284d, 0x864bb867,
-	0x167f89f1, 0x4cb5a71d, 0x59efa2f0, 0x843ce2d4, 0x11d001fe, 0x2d3c7dc5,
-	0xe75f1a01, 0x5d7271e5, 0x80e9c18b, 0x658d4875, 0x5521ffb4, 0xd4329c1b,
-	0xdf29b63b, 0x2d95f18f, 0x0ddfdc8d, 0xd67493f5, 0xd1c3d7fa, 0x9910ab5f,
-	0x790a0144, 0x5659fa2a, 0x30562e85, 0xf7ee3b77, 0x41fe1933, 0xdca548bb,
-	0x2a6f3d5a, 0xd0e52266, 0x13dc8378, 0x6b9e409f, 0xd3b240dc, 0x678daa94,
-	0xc92b2d48, 0x7d6233af, 0x890faca8, 0xa5d54877, 0xac971714, 0xf35bf2da,
-	0x8e086222, 0x9e1e3c59, 0x8d88ef73, 0x727cc2b7, 0x1fe3797f, 0x41873d30,
-	0xfe5b8033, 0x4c073bb2, 0xac16ff87, 0xa62378d8, 0xe8cebc4f, 0xe08fc19c,
-	0xfa8c6657, 0xe8fafcf1, 0xb2abf295, 0xb9d00f26, 0xd27dafc2, 0x094f1abf,
-	0xfe954fe5, 0x4d4ef943, 0x7f865ed7, 0x120526d7, 0xdf4f0f91, 0xdb03323b,
-	0x73de3657, 0x5f88c7c8, 0x77d00705, 0x117177a5, 0x5660ba23, 0x5e5bd097,
-	0x490b3784, 0x1f37bfec, 0x3b7c863f, 0x13e7effe, 0x95df087f, 0x63ce8c09,
-	0xf649fd81, 0xdfaa9a9c, 0x3eb9f223, 0x246790bd, 0xc1464ebc, 0x053bac0a,
-	0xc7bee0da, 0x2b4e6078, 0xf02e7fa4, 0x4de38b3c, 0xef9e3c81, 0x6b40fd7b,
-	0x4b37ae0c, 0xa78ef5c7, 0x76e68edb, 0xa8ffb748, 0x06590fd8, 0xdced0536,
-	0x771126c0, 0xc0e0596e, 0xe2d63be7, 0xc9b96bbe, 0xcaeb0699, 0xf448dfba,
-	0xf68a0484, 0xa7689651, 0xb6aee5b8, 0x9f69cb8f, 0xd2c0d1b1, 0x0ee06e28,
-	0x006473c3, 0x4caab0cf, 0xacc357b2, 0x857aaf68, 0x1e88aaa4, 0x22f5087b,
-	0xef2cb40a, 0x30ac53ad, 0xb042aefe, 0xec7b3347, 0x59fed51c, 0xeb4c9f9c,
-	0x6820ed57, 0x8fddb0c7, 0x0b4aa7e5, 0x19bb224b, 0xf7fb83e6, 0x90264cb6,
-	0xff5213ed, 0xd92332f4, 0x7baf76af, 0x5bb470ca, 0xa0e6a797, 0x9ae30add,
-	0xfd7f6e24, 0xbb67ca3b, 0x285ef94e, 0x49b9e0e6, 0x05801f75, 0x8718d174,
-	0xfeaaed53, 0xe763a5e7, 0x9505b954, 0x9f2f9b7f, 0x59ff7ec1, 0x5563dd72,
-	0x634d4de8, 0xe9e079f8, 0xcf8dbd0a, 0x9e9a5337, 0x73dbb3ff, 0xfe93aea7,
-	0x39feeb79, 0x9ffae1d7, 0xffd88eb1, 0x3cd8f821, 0x3ac67ff9, 0x4ff2996e,
-	0x5f37875c, 0x43cfc86e, 0xe746d679, 0x7e2eec88, 0xdee41c2e, 0xcb9cbc3d,
-	0x09938b39, 0x74ffc764, 0xfd84d779, 0x1c1f419d, 0x7778a1cf, 0x67183a08,
-	0x88a1a588, 0x8ca5cdec, 0x2c8681f6, 0x4340fbe5, 0x224d3a96, 0x6e1603da,
-	0xec520e27, 0xb94b41ce, 0x9ca719dd, 0x118b882b, 0x3fd4327d, 0xca5bcbf6,
-	0xbee0c6e7, 0xd5ec9190, 0xf5dd36e6, 0x5e53d416, 0x868fce89, 0xd2d289da,
-	0x5f9c4a95, 0xf6aa9f6b, 0x79e31a68, 0xb4b3b2fd, 0xa3daa74f, 0xb4f29443,
-	0x603f7ca5, 0x1ed68b48, 0xdad6ab8d, 0x1082fa8f, 0xbaa9733b, 0xeb49d07f,
-	0xe9d72dd3, 0xa87ffcf1, 0xb07b89dd, 0xab0714a8, 0xfeb4067a, 0xf630d74d,
-	0xf9f77e74, 0x1fdc1c8c, 0xd05ab99a, 0xcf5539e8, 0x7e282402, 0x43e3e2a4,
-	0x3f8873d4, 0x5fb534f7, 0xaf3e6fd2, 0x2e4c7048, 0x539cd74f, 0x1e7eec62,
-	0x3a73712f, 0x11eaf5fa, 0xddaed16b, 0x37c6eeb7, 0xfd697d31, 0x04e5e19d,
-	0x6f54f5af, 0xebc6cb7f, 0x7650ff30, 0xe6123dbb, 0x53a8d0f5, 0xefd009ef,
-	0x85e33c6a, 0x2978b3eb, 0x9e14b68f, 0x7ab3d08b, 0xa4dbdfda, 0x0d9f4c0f,
-	0x45122be5, 0x23be911c, 0x1832981d, 0x59309f9d, 0x35f57e78, 0x30e3ee8c,
-	0x1a9f5ce5, 0xd73d0987, 0xc7c3cab7, 0xc4f00559, 0x18963573, 0x39a91f7e,
-	0x08e9fee1, 0x818766ef, 0x8b3939e1, 0x624fee72, 0xa82aaed5, 0xbf7edc77,
-	0x0bee167d, 0x7e881867, 0x26ce98a4, 0x9ed993c4, 0x71c2af63, 0xcd35e242,
-	0x2037e929, 0xfbb5bc59, 0x20679ef0, 0xc9cf7b7d, 0x2a9d312f, 0xf3c3efb5,
-	0x88465225, 0xbf6bd29f, 0x9bdc1198, 0x4a5f3387, 0x6e3b9632, 0x754e9110,
-	0x869a6feb, 0x50c154fe, 0x4f581ae7, 0x1bf30258, 0xbd611e60, 0x7b7989f6,
-	0xce9c20a9, 0xf59648d5, 0xdfd80d15, 0x7fba08a8, 0xae03bec0, 0x4df3a7cb,
-	0x80f657f4, 0x0e3a47a8, 0xc38ff653, 0x1fed7b32, 0x30c2fcd3, 0x3b59e14d,
-	0x7a15c3e4, 0xca7b635f, 0x6b77fb87, 0x106e5213, 0x69f53d1d, 0xbbd6195f,
-	0xab1bbbf2, 0x26fd5f68, 0x9fcf1593, 0xcafb2985, 0xa574e3a1, 0x43675b3a,
-	0x6418b46a, 0x55f11673, 0xe0725f0f, 0xe68353d8, 0x9cfaf501, 0x736e3aa7,
-	0xda83c71e, 0x64c2d19f, 0xf74323b4, 0x81fb43ad, 0x56be7079, 0x31fda9ea,
-	0x01e746d6, 0x518b8874, 0xa7abb57d, 0xe9df0db9, 0xff1fbb24, 0xcc82e382,
-	0x35fc431a, 0xcedb55ac, 0x0dcfca9c, 0x2a18f4a8, 0xfdd0a52f, 0x6f7ad4f7,
-	0x9f81e138, 0x1fad0827, 0xf6d0d70a, 0x5833b7f0, 0xe160ddde, 0xa95d88fb,
-	0xac22b99d, 0x473da57b, 0xbf5a7f33, 0xef7fd3d0, 0xbe6d3cfd, 0xb9f6364c,
-	0x7d07943e, 0x4e8277cd, 0x6c596fbb, 0x8d2fb6d1, 0x25777ed1, 0x4592f368,
-	0x6d91dfe9, 0x8e1af3a2, 0xf79e137c, 0x18d8f953, 0x8af7efe2, 0x2efa2adf,
-	0x1e74c991, 0x79de9375, 0xe3c4e50e, 0x01d24033, 0xf82c3c7d, 0x552e58cc,
-	0x0f515bb4, 0x93d3adc6, 0xaefc7a9c, 0xbde0ce5b, 0x6ba016a0, 0xf771e584,
-	0xc56e9b47, 0xf148b17c, 0x70fb9b0d, 0xcb51d239, 0x37bf5f77, 0x3a9fcf1b,
-	0x5bce740d, 0x75b1b73d, 0x1e2b61ac, 0x94cb8a0b, 0xfdf069cd, 0x84e62aa1,
-	0x6323b099, 0xfc712363, 0x15a2d12d, 0xd1f3ddf5, 0x718efff5, 0x8c19e694,
-	0xe14219f6, 0x46d23757, 0x756e3672, 0x5bf780b6, 0x5f9b1e1e, 0x06317289,
-	0xaf9465fc, 0xc57dca90, 0xf015c717, 0xc5b6c0f8, 0xbe23c52f, 0xdb0f5837,
-	0xa2159e69, 0x52d8a713, 0x8b7fe5c1, 0x7b3ed185, 0x3752a8f3, 0x72ec4d1e,
-	0x8b3c0ec9, 0x41dee2d8, 0x2d595ef3, 0x9cacd972, 0xc8580197, 0xbe9c3951,
-	0xfd4a360c, 0xb3346e98, 0x972839f8, 0x7ce8c292, 0x81f67f50, 0x57cb84b4,
-	0xe9cc6f6c, 0x1143debf, 0x5cc8f18d, 0x9fe467cb, 0x6dfd0b9f, 0xf299b19d,
-	0x538d3caa, 0xdfbbbbe8, 0x1bba3d10, 0x36724bf0, 0x9e2ce41a, 0x878e63c7,
-	0xf575b789, 0x3a20b4c2, 0x7c8055d5, 0x2ee7e2cd, 0xbebb7e30, 0x87e334a8,
-	0x9b9d4cfc, 0x5518e5cb, 0x97ebbb1e, 0xda05dc61, 0x635f51fb, 0x0fce783f,
-	0xb7d71952, 0x443fa851, 0x830cf37e, 0xe839ef03, 0x430e402a, 0x56825d7b,
-	0xc9181c4f, 0xc1fb35f1, 0xa09eccbb, 0x728c4d38, 0xbea3661e, 0xeb069cde,
-	0x744338d9, 0x6c78076e, 0xfa1068a9, 0x55c4c78a, 0x0d997e70, 0xde6fd1f5,
-	0x1b139152, 0x8c669ebc, 0x36d0c073, 0xdb9f0fd7, 0xbfc885d3, 0xbc79235d,
-	0x1cdd67bd, 0x3f4071be, 0x479a87a8, 0x6ae6ae97, 0x557241da, 0x6d6de567,
-	0x073a7aae, 0xcfc155d9, 0xf813ad5d, 0xc4a4827e, 0xf28b9bcb, 0x4bf4bf49,
-	0x492b152f, 0x57e2849f, 0xe5fd3f9d, 0x9911e907, 0x8719f1f1, 0x4cceb49b,
-	0xda07e1fa, 0x4af9743b, 0x1e0bd47d, 0x62ba7f6d, 0xf8e33651, 0xaf105fa8,
-	0x7bc5e63a, 0x95fda193, 0x3a16fc2a, 0xe069c91f, 0x8d9db1ed, 0xdbf48bf8,
-	0xc8e00169, 0xa1ce82e9, 0x3c38f7b3, 0x7c3a24b7, 0x2e01f86b, 0xae7487d2,
-	0x78f7a52b, 0x658e098f, 0x7de8efb8, 0xe7f3a25d, 0xcd4f7aa1, 0xb13070ab,
-	0x3e9ce736, 0x0f9c4dec, 0xa76935ea, 0x01fa89d7, 0xed8a97d0, 0x094b2a36,
-	0x5cd4b3bb, 0xd7ade8e0, 0xab6d5cba, 0x937282af, 0x03f69983, 0x99534c3c,
-	0x79c0307f, 0x1ccf33ed, 0x3df58abf, 0xf803ae0e, 0xe6bce099, 0xe63347f9,
-	0xedf37b40, 0xb9b426ad, 0xf5a1cf43, 0x76a4ef6e, 0x4cab4b71, 0x23c519d3,
-	0x86b95465, 0xafd90b08, 0xe48674cc, 0xc6c934b3, 0x3d10a7ed, 0x50f80eb9,
-	0x644af08f, 0x38d0af04, 0x49f8e871, 0xdefcc905, 0x1a52e2e4, 0xa7454377,
-	0x5d90e31e, 0x4ec57aae, 0xefa9f4f2, 0x7bb1fb42, 0xff23a73a, 0xc81a1577,
-	0xc1f87e1e, 0xcf119349, 0xc51265de, 0x7bd17ad1, 0x233dbac8, 0x1cae9cf5,
-	0x7f28cd8b, 0xdbb9ccb7, 0xfec3e8ec, 0x8b3152d8, 0x965a2fce, 0xa5633b70,
-	0x88e481bd, 0xe7b942a5, 0x71cbd8a2, 0xa213bfaa, 0x3754b727, 0x9bdef198,
-	0x8590de7a, 0xed97dbd8, 0xbbbd1fbf, 0xf18bf961, 0x2aee4fa8, 0x79c78869,
-	0x4ff0896f, 0xd5df1377, 0xf2029f93, 0xf1e51e38, 0x920e91a2, 0x7ff2dd2f,
-	0x0e3b39c6, 0x5569181e, 0x43db8af8, 0x417fe25f, 0x928d66bf, 0x1c6014a7,
-	0x8e44b52d, 0x74bc6076, 0x00d3bbdf, 0x7abd93ae, 0xfb8d63f2, 0x2fc1f481,
-	0x49382632, 0x681e9e5f, 0xac9d22b0, 0x8f46fc6a, 0xe2ce6bf7, 0x7fe855e9,
-	0x87b70255, 0x9818c556, 0xa1f342df, 0x2e754f45, 0xf5a7a866, 0x0137dc09,
-	0x798fc5bf, 0xfd102316, 0xbaf18e4c, 0x298700ad, 0x30bbbe31, 0xd7ac4aad,
-	0x129c60d9, 0xf080b447, 0xc563a29d, 0x9daf1e06, 0x115cf385, 0x59c511f3,
-	0xd1c5a727, 0xc5a3547d, 0xc9fbc3ad, 0xf6d5677a, 0x8bce8cb5, 0xb015bc51,
-	0x8ce1f74a, 0xb6bdc718, 0xeeab8e27, 0xdcf1a913, 0x04290575, 0xffc1212f,
-	0xcb23e22d, 0x1ef1101a, 0x403e987e, 0x46aaf8f6, 0xcd41f913, 0x91da3b09,
-	0xf823323d, 0x3e7aa43e, 0xb163e017, 0x0c567c02, 0x95d69bbc, 0x17bb1494,
-	0x91faa5e7, 0x50af20f1, 0xcc2565de, 0x4beb8a9b, 0x4aedc37a, 0x0cc67a86,
-	0x1660365d, 0xa2b9eae0, 0xc61eac78, 0xd8583c21, 0xabfb4c38, 0x40d122bf,
-	0xf2d0d8f1, 0x5c780b27, 0x21050b32, 0x135eebae, 0x755dcfdd, 0xaaf7bee0,
-	0x301e7e50, 0x6767c939, 0xffbc1481, 0x66771dde, 0xaeddff7c, 0xdbb5bf9c,
-	0xa63f740d, 0xf8ccbe3b, 0xe71abcbe, 0xd9e51a88, 0x31f2788c, 0xc7f421c7,
-	0x8f71abfe, 0x4fca461b, 0x6dac7f60, 0x63c515c0, 0x68eac6c2, 0x8529279f,
-	0x05f78279, 0x5feb2956, 0x7a870dd5, 0x75f5ea3b, 0xf6079428, 0x378d870f,
-	0x2226bbe7, 0x88ec46dd, 0x47dafd47, 0x171343bc, 0x79287bc1, 0xfa6204b1,
-	0x9c79aa93, 0x3cea6624, 0x5348778a, 0x0ad93ef9, 0xdcfc6016, 0x7c84c0a0,
-	0xfd4beaba, 0xe887700d, 0x927accd7, 0x90ae9193, 0x7f2f48b8, 0x6576e645,
-	0xa2dbdc88, 0x02f1f9f0, 0xcf91ee25, 0x93e7bff2, 0x5228bb25, 0x1889f7d9,
-	0xe8724295, 0xd90a5711, 0x411cc443, 0x9d9cbef0, 0x87b15073, 0x8f9ca77e,
-	0x83e72bf7, 0x83e72b0f, 0x0b77c55f, 0x863f90c0, 0x7a4016ef, 0xe549c9bc,
-	0x2815346f, 0x6fe399ca, 0x4892ee45, 0xf9941fb2, 0xadf994e9, 0x25734eb0,
-	0x6d567e03, 0x5879d3d3, 0xe984c263, 0xaf32cf68, 0xdb119edc, 0x7587ef73,
-	0x9efcbfc2, 0x095da773, 0x3a4f3a1e, 0x3ff7cac7, 0x542d7c55, 0xb612afea,
-	0xc75f9019, 0x36e16a76, 0xc6a452fe, 0xda622cae, 0x4d1397f3, 0x4bf53443,
-	0x97f3daac, 0x6ad7ec93, 0x68764fbe, 0x975e5fcf, 0x1f643e31, 0x0b574b56,
-	0x806e8013, 0x7d33aa4e, 0xd685ff34, 0xcd7b8a52, 0x74c7b90d, 0x3f36ab47,
-	0x2fcda7df, 0xabcdaddc, 0x46c3c9e7, 0x9230f429, 0xf131fc8d, 0x0cf7e44e,
-	0x0107ef85, 0x3ab36fbf, 0xcfda1199, 0xf8bf7816, 0x1b00c61e, 0x76c94bed,
-	0xe3ac238c, 0x5cb09ff7, 0xc3bdcbc7, 0xbe7af695, 0xdb8ec56f, 0x4b1dbee8,
-	0x06ede1cc, 0xfc7eeff0, 0x72f1a48e, 0xfe87af0e, 0xa21bd612, 0xe5c353f4,
-	0xfe459c93, 0x33ec9b82, 0x62b36b23, 0xc2fe016a, 0xe9399a34, 0xab0c759e,
-	0x9075bf27, 0x51327f72, 0x43bca4e8, 0x3e6186b0, 0xf0a67045, 0xe48f85f8,
-	0xfe4950c3, 0x89f12a75, 0xf447745b, 0xb90d97e6, 0xaaf007ba, 0x910286f8,
-	0x5623e2e4, 0xd8f9ef46, 0xbf13f75c, 0xb016c36e, 0x8f6b336e, 0xf87a1549,
-	0x61bcede7, 0x5c135fc4, 0xb52fda0e, 0x780b2415, 0x8588a52e, 0x4536cb9c,
-	0xc4a3e869, 0x5f42171a, 0x4be84243, 0x9d7f7f4b, 0x3945d5ec, 0xe842ce90,
-	0xe5be2ff0, 0xaf182c51, 0x05fa8f4c, 0x7689d58f, 0xca9e054a, 0x754f9602,
-	0xee319b46, 0x73d18b67, 0x3fd8a579, 0xab9f4aa5, 0xb2eb59e4, 0x566bfbe1,
-	0xf6e649d1, 0xf13d2dba, 0x96df1825, 0xea35f600, 0x5c919963, 0x1fd3b07d,
-	0x7fd43576, 0x65fffc04, 0xeb1bfd0c, 0x65efbc64, 0x5f10e4b5, 0x7949623f,
-	0xd05ef300, 0x437f58e8, 0xe5aff731, 0xef826ce8, 0x05bea151, 0xc23da5ef,
-	0xc1a94cf2, 0xfebc2df5, 0x5164597a, 0x31189f90, 0x9dbfea82, 0xcef86667,
-	0xd9a07781, 0x63ec7187, 0xdd77acf2, 0x7b7feb41, 0xaf07d714, 0xa8f11c19,
-	0x7c991e0f, 0xd287a677, 0x685f8d74, 0xbee4104b, 0x8f8517ce, 0x92bd7236,
-	0x78c7e25b, 0x34c2747c, 0xfd039957, 0xe90bb71d, 0xf112e742, 0xfd375be8,
-	0xa87e2b44, 0x0fc106e4, 0x5d749b4b, 0xe3ff430e, 0x35770b11, 0xd59e291e,
-	0x02f98652, 0xd903ee91, 0xd9ebe25c, 0x7e02aeb8, 0xe54af0fe, 0x181ea871,
-	0xbfdb9a32, 0x3c448693, 0xdffa1430, 0xb15a2450, 0x2b7a0dff, 0x4ef1e7dd,
-	0x1757e466, 0xe097eabb, 0x11096dbc, 0xda6fcf0c, 0xbe781a0a, 0x00ccc0d8,
-	0xbd6b934f, 0x4a69f117, 0xf6c08cf5, 0x7a7e0747, 0x5b19ed1c, 0x703a4882,
-	0xaef9cba2, 0x2817eb1b, 0x79e29df1, 0x9b3c70eb, 0x599ab445, 0xb9541c0f,
-	0xcbc99ebe, 0x0ab2ffc9, 0x0accdef4, 0xce0d436b, 0x708491e7, 0xae6df3b2,
-	0x79e20b06, 0xd13d40c3, 0x7f224941, 0xc2556a57, 0xffcc0ab4, 0x7191a062,
-	0x1f2ff3be, 0x5381fe8a, 0x5b3575a0, 0xc75e681a, 0xc139892e, 0xa9a896ef,
-	0xcf85a1d9, 0xf8f146ef, 0xf1e30990, 0xf5b79f80, 0x8b9a9ccc, 0x78a7a3f4,
-	0x6b7c7f53, 0x7ece5d73, 0x2afe61fb, 0x110b0394, 0xc29785be, 0xfa404f98,
-	0xfe61293d, 0x5b017f77, 0x60d9d680, 0x6e41fec1, 0xbfa2fabb, 0x7e9cd188,
-	0x4b0e0b9b, 0xd7824ef8, 0x341f1021, 0x444e4e5b, 0xb528783e, 0xa1e8e88c,
-	0x899a8f82, 0xfcf3862f, 0xeef779db, 0x137a3c41, 0xe77f69c3, 0x315982a1,
-	0x60bef4c1, 0x32f44894, 0x4e616fee, 0x9463e23f, 0x91fbf881, 0x8c56c708,
-	0xccf3794f, 0x824bbf64, 0x986cd975, 0x2862c4e7, 0x5da2fe87, 0x7ef13e62,
-	0x0b8f0575, 0xd57e302b, 0xf8843b65, 0x31664a90, 0x3949ae7e, 0xef9114f7,
-	0xb435435c, 0x25956ffa, 0xd8cfde97, 0x4270d092, 0xbb20b6d9, 0x5722906a,
-	0x45889406, 0x5906df28, 0xeb655db8, 0xbb940594, 0xaa47fba1, 0xed29d7be,
-	0xa65b328c, 0x371b54a3, 0x7d7015d2, 0xe97f6a1b, 0xc35edc2c, 0xae8fbc3f,
-	0x893f35cf, 0x317438e7, 0x197f7ada, 0x0a739ca5, 0x3a54afb1, 0x7ae560df,
-	0xd1ae4362, 0xa1bd7487, 0x2a59db98, 0x47f2ab1f, 0x872abf85, 0xef7e7bd4,
-	0x5195f628, 0x87365e4e, 0xe599eae4, 0xd4076f78, 0xc317739e, 0xfa56897b,
-	0x1f72aefe, 0x6f6294f1, 0x5bd8a7bd, 0x5bd8a1ff, 0x05bda3ef, 0x835186f9,
-	0x1437bf08, 0x08dd762e, 0x20901af3, 0x3a14df11, 0xedc44c4e, 0x271971af,
-	0x61d97d2c, 0x0ea2d111, 0x348f05e3, 0x36497bf2, 0x1598ed97, 0x95cf59f1,
-	0x766b2cf9, 0xbcbb3469, 0x7ae3f27c, 0xe43ed1d2, 0xb9557beb, 0x994c794f,
-	0xfe6571ff, 0x57f3286f, 0x43498fed, 0xbca132be, 0xefaf10df, 0xfc297e47,
-	0xb9d0a729, 0xb57950a8, 0xe908c401, 0xfc9122eb, 0xe778209f, 0x25bde46a,
-	0x4ef5f720, 0x1e68c959, 0x7660dbbf, 0x7c462c57, 0xa714664e, 0x27aae89d,
-	0xb90365b9, 0xf8b37245, 0xca6ceb5c, 0xe5833847, 0x6381519e, 0x8e5acbb1,
-	0x4638be72, 0x24571f4f, 0x5bbdd0a4, 0x1d0efed5, 0x0cf072f7, 0x82a66795,
-	0xf3e25ef5, 0x6c7247ff, 0x8ee3e32c, 0xfd3a24bd, 0x4f1cde5c, 0x91237926,
-	0x5fed0a7c, 0x636f3795, 0xbe2064cc, 0xfba1644f, 0x610a7700, 0x9de7844e,
-	0x3f307c28, 0xff7dd197, 0x673d8ac1, 0x01d1de57, 0xceb8a14e, 0xf5b04ed8,
-	0xfc7af883, 0x1bf75325, 0x8f8edc6c, 0x9a27e4d6, 0x4bf535e2, 0xef9ac9ac,
-	0x35c3ec93, 0xb23b27df, 0x32ebf935, 0xffea6946, 0xc9a459c2, 0x593050df,
-	0x2e4cbf53, 0x6665e4d3, 0x0e4877a5, 0xfa1eed36, 0xa7fd1eb1, 0xa71fa1b6,
-	0xa14f86f5, 0x0e0bf0f1, 0xa3b5e160, 0x00e8678b, 0x87518546, 0xfc864cef,
-	0x6793d1c6, 0x0aef80e8, 0x3afe1f07, 0xd3685819, 0x7f3c29e8, 0x53afe1f5,
-	0xf465bf20, 0x863f3c75, 0x3adcf091, 0x2f0cea7a, 0xea1c59e0, 0xd0347479,
-	0xea972df1, 0xf83da28f, 0xe6d365c7, 0x4ef84b26, 0x06625940, 0x8a6ce7cc,
-	0x7efc61e7, 0x15acec73, 0xfc761178, 0x8f74f577, 0x79a337ed, 0xfc8b8ebb,
-	0x8b8e8d5d, 0xbb0d1dfc, 0x53f6f1c8, 0xcbbef553, 0x7e9a0e04, 0x64115fdf,
-	0xfd05af7e, 0xdc6939cd, 0xfd14c4df, 0xdfd14c4d, 0xcdfd14c4, 0x6fee7a39,
-	0x26fe8a62, 0x89bfa396, 0x324d5be9, 0xb934efa5, 0x726f6d28, 0xbf7dda53,
-	0x6ae729e0, 0xef380a3d, 0x985b8b4f, 0x1117e4c3, 0x4ae7a14e, 0x4f9df43a,
-	0x45ca7ed0, 0x12fbc0e6, 0x394e2287, 0x39acbf70, 0x2e7444cf, 0x4c3bb674,
-	0x9730bdf0, 0xb62f9be7, 0x617e503b, 0x8e9eed1e, 0x946cb6e8, 0x16b5cdbf,
-	0x35bbee27, 0x23c7f45f, 0x1bd6149f, 0x714cdee8, 0xe9c52767, 0xbdfc2d0a,
-	0xc7114384, 0x91e3288e, 0x9179da5c, 0x277c45f9, 0xb0eedcc7, 0x3f60e32a,
-	0xea326e30, 0x3025c2b7, 0xbf5bf52e, 0xb0a9fa98, 0x842b8f74, 0xe1fa6b8c,
-	0x410a2771, 0x3176a6e3, 0xc701177a, 0xf5c66875, 0xfc3f744b, 0x78c25fa2,
-	0xd3b44761, 0x354d718e, 0x21df8c5f, 0xdfcf45bf, 0xf8742c5f, 0xb893d425,
-	0x5bef89bd, 0x33d881c6, 0x1f0d79d3, 0x47a865c9, 0x5d9db971, 0x9a179d7c,
-	0x9f900bfc, 0x6077958a, 0x7ba58cc0, 0x730c4c9b, 0x9128bea2, 0x38363bbe,
-	0xe339df17, 0x1b15a0ef, 0x1f90dbdd, 0xde5c74eb, 0xdf3318b0, 0xcfb5d057,
-	0x3bd415ff, 0xec983b19, 0x4bfb0495, 0xb404752c, 0x44cae45f, 0x5b24e3bb,
-	0x7568724f, 0x8f7fe794, 0x31be7a06, 0xf4505eb3, 0x7763f527, 0xfdc0ef85,
-	0x86578e88, 0x4d1f21e5, 0x645e3a33, 0x1f7fbfc0, 0x3cfc44dd, 0x8791ca2d,
-	0x7dfdac2f, 0x8f9e0af4, 0x3788bc73, 0x69acad83, 0x8ffc7146, 0xf1452f3f,
-	0xa79a740d, 0x7fb43a0a, 0x765373d4, 0x063613d1, 0xfaeb54e0, 0xd7e7c0ca,
-	0x7078c069, 0xc10718d4, 0x4661e06f, 0x273a98e7, 0xe076f847, 0xfa80df7e,
-	0xb2878c6c, 0xd61e474c, 0xd277d24b, 0xef8ef27d, 0xa827fdf8, 0x50537919,
-	0x8389fefc, 0xf8afab92, 0xdc31c9e3, 0x6a945d4e, 0xa8788759, 0x944c9bb3,
-	0xe748bc1e, 0x9dce9982, 0xd96bf18a, 0xa97bf7d0, 0xfae18eaf, 0x41a57921,
-	0x74410231, 0x30e594c2, 0x0cbde6a6, 0xbbf6d0f4, 0x8bdfbac3, 0x43327003,
-	0xdef3c89a, 0xeb178f1d, 0xac65f534, 0xe31dfddf, 0xbda7acf4, 0x8fcddbfc,
-	0xc6554f2f, 0xc7997a43, 0xd50c7fc8, 0x6d0b6b3b, 0x843f3bea, 0xcc63c7e7,
-	0x523de9db, 0x14877949, 0x4e315aea, 0x3de8ce11, 0x37bfc1ae, 0x9e819afb,
-	0x3d399a76, 0xdd3c8aa7, 0xeafaf229, 0xbbeaa53b, 0x7a14cf6b, 0xa3cc2b6e,
-	0x8fd4fc7e, 0xdf1b37b4, 0x6d6788cb, 0x6efabe34, 0x012f5a94, 0x2b0920f4,
-	0xe23a675d, 0xfb1250ab, 0x63e7e784, 0x1d20e68a, 0xb2f2685c, 0xcdf4824f,
-	0xc6c8f085, 0x49d5fc60, 0x3f5af7da, 0xda81331f, 0x1b6beda9, 0x284fb227,
-	0x3a27e978, 0x69154daa, 0x624ebd1f, 0x9c3be2af, 0xa80d5920, 0xa776d597,
-	0x78e2de40, 0xc5fc82ef, 0xbb903df4, 0x3ed1e89f, 0xfbe94e9d, 0x3f2a1e4d,
-	0x694d54dd, 0xca9ea9a0, 0xa46a6a3f, 0x23db96f4, 0x167f9172, 0x3ec65fed,
-	0xdaf7a209, 0x1027bd36, 0xd4553f94, 0x51ad1d37, 0x7254e8e8, 0x1c9fdfdf,
-	0x53bbedc3, 0x3b3e38e3, 0xf7c0dec0, 0x972e80da, 0xdbfd6d5b, 0xfdca1d1d,
-	0xf9e3a3ae, 0x3c4765fe, 0xc31f2fcf, 0x64596efd, 0xe8fed8ad, 0x3fef0378,
-	0xefc6ac45, 0x7bf78db2, 0x77a45d2a, 0xb1357ea4, 0x5831fee8, 0x73ca163f,
-	0xaea7f27a, 0x41e5dfe2, 0xaf9d5cbc, 0x42b6fdfa, 0x61eefaab, 0x8fcf7f3a,
-	0x7a02f7df, 0xfad5fea7, 0x3e702663, 0x4befad0c, 0x43c9e7e5, 0xc2a9f1e1,
-	0x6817c4b7, 0x241f2367, 0x9d45f107, 0xa542f883, 0xd6fe9543, 0xa7387216,
-	0x0f3a151a, 0x07eee7e7, 0x76842ea3, 0xb4cce383, 0xbbe3208f, 0x9d9eb0cb,
-	0xa12fc282, 0x63bca0fc, 0xca83f2ac, 0x0fbd2a07, 0xefe33e06, 0x8c75f334,
-	0x5f79fa95, 0x7b475958, 0x845dc46c, 0x2b7a83d7, 0x12b1adea, 0xb0792f7f,
-	0xedcef5d8, 0x11b19fc8, 0x96918c0e, 0xf7d4b2ac, 0xfe3ec725, 0x9543c2af,
-	0xa3c0fd0b, 0xca0c1c17, 0x123fc3bb, 0x50e7240e, 0xf6fd238e, 0x8c4eb721,
-	0x177629b1, 0xc7cfdfa7, 0x1d226fc8, 0x1d660875, 0x30e87bde, 0xf05f7df7,
-	0x0ebe78e8, 0x16d68e95, 0xe3074a32, 0x96f6873a, 0xba7aea7b, 0x230779d7,
-	0xc61a97f9, 0xacf143cb, 0xfe482bae, 0xa979c19d, 0xec0c64f0, 0xa127e81f,
-	0xe8ef42c6, 0xe0e856dd, 0xd3f036fc, 0x67ac0dca, 0x3e8a35fd, 0xf8944c7b,
-	0x7e8ac87b, 0xa4172ee9, 0x1a996599, 0xcf4743bd, 0xefe15f3a, 0x5645fb8a,
-	0xa372ef8d, 0x171c1d6f, 0xe5c8521f, 0x3cf4d743, 0x2f13f711, 0xf742d5fc,
-	0xea0c2f8b, 0xcef68d3c, 0x533d5685, 0x2a9b23de, 0x8b9dde80, 0xf90c133e,
-	0xf39ef2a5, 0x0ef7e8e7, 0x176d7a83, 0xb5bda34f, 0x4cc4ab68, 0xeb609e78,
-	0x3d20b737, 0x4f457bcd, 0x5b9a99e7, 0x7a471e37, 0xc04fb73c, 0x85d96fe7,
-	0x31c5027d, 0x7c225b6b, 0x0a5fa866, 0xc77fac79, 0xe3c7c96e, 0x39c5328b,
-	0x3ef1946a, 0xa0a5d731, 0xeb713e5d, 0xfb843a5d, 0x8b02edbc, 0xb48f7e83,
-	0xdf0c79de, 0x8db7391d, 0x366b2fdf, 0xf9c0ee47, 0x0ceb4a97, 0xc17ca083,
-	0x635e5e76, 0xf70cfd29, 0xcd3c1743, 0x60b3fe28, 0x8ff9046f, 0x1ff45af3,
-	0x8eec8205, 0xfcda6dea, 0x4066d67c, 0x53b0583a, 0x07b35e5b, 0x79f241f2,
-	0x2f12a150, 0x29b2ce19, 0xe3c2d25e, 0xef7caa07, 0xb97b5f6d, 0xde506d1c,
-	0x897f66ff, 0x5f0ff7a5, 0x23e926f9, 0x2997cf0b, 0xff9033f9, 0x178e1bea,
-	0xca752e15, 0xb3c55fd8, 0x675836dc, 0x2b662bdd, 0x0775edfa, 0x79e246ce,
-	0x016145b0, 0xbd99177a, 0xded1592c, 0xe4bf607b, 0x1ed6f845, 0xfb893f34,
-	0x9e2f7598, 0xa13c6030, 0xb262df74, 0xef312657, 0xfd9bf44a, 0x89dac8a2,
-	0x7de9da8e, 0xce77265f, 0x1c2e7ec3, 0x0ed15b30, 0x4ff97ba8, 0xfcc76ec7,
-	0xa7dd028b, 0x201890bc, 0x55b7993a, 0x0c437ba2, 0x1efcb42d, 0xaf10913a,
-	0x28b6e788, 0x0ee58f7a, 0x19e23bc4, 0x4648eef0, 0xd071e13a, 0xf44b4f79,
-	0xd9b5b9bd, 0xf9cff580, 0xbc557e38, 0x094b4a97, 0xe71e0bcf, 0x75b89cf8,
-	0xa430e6d7, 0x64f5a783, 0x76811f8f, 0x0d3b7883, 0xe15e181d, 0xc5d85ffd,
-	0xd37791cf, 0x376301c1, 0x2f3ce01d, 0xa7c00747, 0x472ff7a4, 0x97e89d07,
-	0xddffbf92, 0x0ed0c7b9, 0x87e7e08f, 0xd51b77d5, 0x2e071a77, 0xdf14753c,
-	0xbfb34ae7, 0xa5777640, 0xc5da8bed, 0x9d09de8c, 0x4be78853, 0x02bdbf26,
-	0xca7277d1, 0x2f14d9b3, 0x6d7607d5, 0x744378c1, 0x3ac7c538, 0xe1b6cb92,
-	0xb6c598fb, 0xc2f6936f, 0xcefd163a, 0xeb11e748, 0x3fc67e15, 0xbea2073c,
-	0xa7780c4b, 0x07b519f3, 0xc65cfc8d, 0xe1fbed3e, 0xce9cf11d, 0x959d0c4b,
-	0x804fd18b, 0x411c70fe, 0xc2e9fee6, 0x451dfc83, 0xa85c9fd5, 0x47b8a7be,
-	0x60836efb, 0x3dea9b7d, 0x70429850, 0xd6371a18, 0x73797681, 0x0d84f339,
-	0xc17d21fd, 0x5c7ca9df, 0xb5fa8bf1, 0x1bd1fb27, 0xbcc91daa, 0x15daf721,
-	0x014775b9, 0xbbd1e39f, 0x7be1d0df, 0xf93b1d8c, 0x3fcc3bef, 0x062af208,
-	0x1af519f7, 0xd4a753b9, 0x0fe914ff, 0x5bde76e0, 0x052892ff, 0x8bf797cb,
-	0xa79a9fb1, 0x48753f79, 0xf5571457, 0xfe830e6f, 0x33d36cbe, 0x4c0597e4,
-	0x23fb3791, 0x4bd46e28, 0xbedcecbe, 0x50f7cd12, 0x76085aba, 0x94222e26,
-	0x69f6eabe, 0xa85d3deb, 0x670e7bec, 0xfff9e0d7, 0x90e031af, 0xba5f23d7,
-	0x8e67e9df, 0x6eefe428, 0xef68287d, 0x056b0fef, 0x77ea0f96, 0x63c4cfb8,
-	0xeafe4aa4, 0xfe4d56dd, 0xa6bb369a, 0x1dfbb5fe, 0xfed9ef9a, 0x11f7cd0c,
-	0x7c9a9dc7, 0xa6817b5e, 0x64f7c8fe, 0xc0547e4d, 0xe63fa9a5, 0xef935bbc,
-	0xf4f584ca, 0xe9a8cf61, 0xa9a0bb24, 0xd661d93f, 0x465d7ff4, 0x65df26b4,
-	0xd8a3e051, 0xfbfdaa99, 0xff6e42a7, 0x7c2aa686, 0x8ed4e17f, 0x37edfaa3,
-	0x2bc76814, 0x5de3b593, 0x1df05e29, 0xff9e9d41, 0xf8a6027e, 0x34ba09fb,
-	0x9809fbfe, 0xc04fdfc7, 0x013f7f14, 0xe4dd7fcb, 0xa6befca4, 0x04bfca02,
-	0xf7e6097e, 0xe9829f83, 0x609fe0cb, 0x77e0e5f9, 0xb8f7194c, 0xca1bee32,
-	0x4e153fb8, 0xbdfd296f, 0xef87f4a3, 0x3df4ea0d, 0x795d6bdf, 0xe3e025e2,
-	0x7467db22, 0x086e595f, 0xa31c6294, 0xe18975f3, 0xf1e667f9, 0x418a6f1d,
-	0xa18036fd, 0x9ddcc49d, 0x6e3ee26f, 0xad438bdd, 0x81efae78, 0x07787ffd,
-	0x27d85fbf, 0xf0e6bc51, 0xd891b3fe, 0xc29797cf, 0xe90a30e9, 0x7cd7c845,
-	0x0d7e502b, 0x6773c77c, 0xca4af793, 0xa46d67bb, 0x554cbeef, 0x2fba3ef3,
-	0xd7b3deed, 0xb85a7880, 0x7f7d2f7b, 0xf35af81d, 0xcd76f77d, 0x87d62b77,
-	0x47cea174, 0xf7cf8571, 0xa9f9fdab, 0x7f2a4d7e, 0xddf3fe3f, 0x418e5647,
-	0x6ab7bc7d, 0x17b5c600, 0x3b1139ee, 0xf1f007fb, 0x66cf4bd5, 0x3da81ea2,
-	0xd1e72920, 0x07b57f78, 0xcf9e4af4, 0x6f7526bf, 0x63379e29, 0xb3ba047b,
-	0x4f5b25f4, 0xee16c4e7, 0x728355df, 0xedc66176, 0xb57f8a7a, 0x83bc4a49,
-	0x6350d3bf, 0x6baedc65, 0xdf123afb, 0xdb7dffa9, 0x1ef1ebd1, 0x23c1c774,
-	0xc74c5ef4, 0x4fe3493e, 0xf1cb1d8d, 0xf72c763b, 0x77dcbeff, 0x09cf1224,
-	0x8476d03e, 0xa7e75dc3, 0xf2561ff5, 0xbc12901d, 0xfeb44bf7, 0xcd2497f9,
-	0xc0b801ef, 0xcdfba171, 0x7022d3fb, 0xf8db275d, 0x7d40d378, 0xd56a7950,
-	0x1bff9c1c, 0xe53cf2f6, 0xddfa327d, 0xaeab8ea1, 0x767285db, 0xe7d49b61,
-	0xd839f779, 0x98efcc2f, 0xebe9d39e, 0x1b1c2fa9, 0xc37f7004, 0x749b2035,
-	0x62af5284, 0xa59bd72c, 0xea2a4f06, 0x47169391, 0xfdf9d204, 0x8811a1ae,
-	0x6298c3df, 0xba49ebb9, 0x1f60be07, 0xb5a4ef1f, 0xeee9123d, 0x5211bee4,
-	0x2dcbfef0, 0xe9ba7aca, 0x5e6f1bbb, 0x6fb553c2, 0xe9fb05bb, 0x9f2f1fc1,
-	0xf54ad636, 0xb89df0df, 0x93aced05, 0xc0ddfc19, 0xfe460663, 0xdc3dc2f5,
-	0x70793e4e, 0xfbe0f6f0, 0x7c14d359, 0x7df06474, 0xf5fb0bf5, 0x77dbbd4a,
-	0x3d3d4d31, 0xed4ed7c7, 0x33beac7c, 0x5e7da10f, 0x6744b8f3, 0xf5f46a1d,
-	0x4ffeb8b1, 0x57e769b7, 0x46b9c0ad, 0x0d8d8fef, 0x039ad7a2, 0x21637cdd,
-	0xf2a03f3a, 0xa9f08389, 0x8664f1e2, 0xe765e7c4, 0xecd5f8ef, 0xdd7445dd,
-	0xe3c4be3b, 0x31ef83b7, 0x74be2939, 0xb55a7f19, 0x2dfc821b, 0xbd23bdfa,
-	0x989e686b, 0x9c1f63d2, 0x1a1f942e, 0x987e879b, 0x93ccfc9b, 0x185bec0c,
-	0xebed16b3, 0x891dfa28, 0xd76e38cd, 0xffbd3d3e, 0xb03a6b5f, 0xef23df00,
-	0xc0a30272, 0xe9b6bbbc, 0x4667dfbb, 0x629e773b, 0xf0ea7ee7, 0x7fa04be4,
-	0xb489976b, 0x923d9abe, 0x5c17cf0f, 0x57dee450, 0x406f937b, 0x2e39ad7a,
-	0x9a3fd159, 0x70fc96d8, 0x77e92e61, 0xdaeb57b2, 0xb75c9db8, 0x58bb205b,
-	0x156a43b5, 0x629ce43b, 0xd65b9f07, 0x57e3edc9, 0xea11b604, 0x7b030dad,
-	0x9b5de604, 0xdaec8539, 0xcadd695a, 0x473c0ec1, 0xe61bb5a5, 0xe7443c1f,
-	0xd1cec0ae, 0xaddc2f94, 0x69b6d7cd, 0xf8bfaaf3, 0x3b6ed8d2, 0x37fa3863,
-	0x1c615225, 0x0a9bc3f2, 0xe77f555e, 0xf49c6bce, 0xe80f27fb, 0xb8d4531c,
-	0xd16bc204, 0xc7cc2f2b, 0xc26afb79, 0x347fe49c, 0xdae096fe, 0xd7ee17f1,
-	0x1bdee074, 0xf0e333f2, 0xe9cfd8ed, 0xf05e917c, 0x2cbaefe1, 0xfd815d42,
-	0x32df0499, 0xbb7b3b8c, 0x293e4922, 0xca1a08e7, 0x632affb9, 0xb2a6180c,
-	0xe7f72c7e, 0x38eaf543, 0x0e8a405d, 0xb1811392, 0xd8af5429, 0xde57cfc0,
-	0xfd24e119, 0xedc4c436, 0x6e2621f5, 0x75d10faf, 0x85dfa32e, 0x7df02418,
-	0x6997ac8e, 0x9d6d60ff, 0x0417f685, 0xe10e957b, 0x955076b1, 0x887de90e,
-	0xfd032db5, 0x8c5f353a, 0xec7b33df, 0x478b5283, 0x8cece387, 0x047d9417,
-	0x74cb4fae, 0x90747d56, 0x996c657e, 0x3dea7e66, 0x7e7d9fcc, 0xa59f9856,
-	0xef807e67, 0x75ff6c28, 0x86ec93ae, 0xf7f532a4, 0x2e49ea1a, 0x12fcf0a8,
-	0x7018bde8, 0x816c7745, 0x1db66a6e, 0x96b2ff22, 0x76c4afb5, 0x1d7c91a5,
-	0xbefe06a5, 0x4f186951, 0xfcb8e375, 0xa5d2512a, 0xc3f6b4e3, 0x7eb27191,
-	0xc63ba41c, 0xf2e34db9, 0x79953f68, 0x6f0d7d61, 0x43d677f3, 0x13943ee5,
-	0x7c0d7d3d, 0x466ff288, 0xd54d60bd, 0xbf9c69d8, 0x6ea2f116, 0xf6f85a3e,
-	0xea27c493, 0xc66acc39, 0xa3667bf9, 0xc41a9ad9, 0xdf908b17, 0xc377ded0,
-	0x138c7cbf, 0xeb6abff0, 0xe9973a7c, 0xa2b58c69, 0xfa48b75f, 0x7e25f692,
-	0xda2ddf2c, 0xcdfbcdaf, 0x11fdfe9c, 0x1949f902, 0x0de3bae3, 0x0a498fc4,
-	0x08f76c7f, 0xfb600e74, 0xcf1e3a77, 0x7e2810ab, 0x36143377, 0x624994da,
-	0xba22eabd, 0xe333724f, 0x4b596347, 0x3dbbf28c, 0x796fb431, 0x9beeb293,
-	0x2843fe75, 0xdbea8e57, 0x749e3192, 0xc4e4d6b4, 0x1b59cbfe, 0xc15a6fbd,
-	0x153d29da, 0x9fa2f75e, 0x2226f73a, 0x63c9fddd, 0xf6d678a4, 0x50223be5,
-	0xe5b167be, 0x044fdc56, 0xb7c6ec50, 0x73b3fb01, 0xd51df742, 0x2f60c4fb,
-	0x027d21c7, 0x1d2127fe, 0xd8dc079c, 0x5fb77a73, 0x2317c7f8, 0x2c5f7f11,
-	0x5b96e179, 0x9d5ffa19, 0xa82d47e4, 0x5df7465f, 0x33da9c81, 0xaaf07bf2,
-	0x5bc55de2, 0xf01d5e37, 0xb0af182f, 0x938404a6, 0xc91965f4, 0xe8917fa5,
-	0xf0e5d69c, 0xbc7dc2aa, 0x0e3b9f82, 0x8a15f970, 0xb70f156f, 0x43f5bbe2,
-	0x236eef49, 0xc923313c, 0xb87a50cb, 0x3080be1c, 0xc4d93ce9, 0xa1f92318,
-	0x4f2e4583, 0x2813cf07, 0xf33b795e, 0xf48012bc, 0xf5f7f096, 0xc70adefc,
-	0xb782855b, 0x2fdf313f, 0x71ff9232, 0xce323b78, 0x606e34dd, 0xe50dbe6f,
-	0xb2f8fed3, 0x37fce1c6, 0x18fa5f55, 0x3f0863f2, 0x376bf087, 0x2ff09d1e,
-	0xc69e8f08, 0x6ecbe248, 0xae7b4b7c, 0x7fe22f4c, 0x5fb58e30, 0xaf93f9f0,
-	0x46055f80, 0xf8f8bfbf, 0x54dead38, 0xa5c2a6f1, 0x07e0b8bf, 0x2ad47fcc,
-	0xe70abed0, 0x748dbbe3, 0x57dd43ff, 0x5e4ff751, 0x5cf5c719, 0xd801fa68,
-	0xb55fb84b, 0x40e4e326, 0x194f33b4, 0xfef87ed4, 0xdacb07ef, 0xb6f7f113,
-	0xe9e2283e, 0xddff0329, 0x872f350f, 0x07e4b8f1, 0xc22f46f1, 0xf86103e9,
-	0x1f33d404, 0xcf5cf708, 0x070671f3, 0x26e3cbe6, 0x53903de0, 0x798e357a,
-	0xf07f12bf, 0x8f9479f1, 0x027aa62c, 0x074a5dff, 0xf61ddefe, 0x1736082b,
-	0xbb83e7cc, 0x9d7de8d2, 0x718d7dee, 0x467f0edc, 0xdc774759, 0xe2815eff,
-	0x355133fe, 0x84c4fee1, 0x877c2e2d, 0x437df4f3, 0xb4df69b3, 0xea3e3b41,
-	0x978a64fd, 0xfee7e06e, 0xabea752e, 0xb75bf482, 0xc8be2dbe, 0xd1e4e7cb,
-	0xbfa88cef, 0x86db2747, 0xc7dcff73, 0xd550df7f, 0x5fc75d67, 0x73c704b0,
-	0xdfe2533f, 0x0fe1f9dd, 0xc3eb0526, 0x4dad4f43, 0x0daa7ec7, 0x05a72cde,
-	0xb1ee877f, 0xaa5bb424, 0x4e955a9f, 0x0f53f4f6, 0x545fa3a4, 0xba6d63bd,
-	0x0f70f94c, 0xbe3a65f9, 0x1b9e2fee, 0xd4f3e745, 0xdccaf6fe, 0x1d30a8af,
-	0x3dbd412a, 0x56afeae5, 0xda41fee0, 0xffc5027d, 0x15f6b066, 0x332b67a8,
-	0x16b15f38, 0xe87fc913, 0x776bf68f, 0x4ec5ff0d, 0x646f0794, 0x81cfd59c,
-	0x203e127a, 0xd5df1035, 0xdfa3adf2, 0x7fcd5c09, 0x7ea7b027, 0x56ffed22,
-	0x9de8172d, 0xfcf519ab, 0xf1a4f377, 0x59c704d1, 0xd18fb3ab, 0x794b57fb,
-	0x6fa314f9, 0x67ec49df, 0x3fdf818b, 0xe094ee64, 0xb29270fb, 0x9d73385f,
-	0xca717bf2, 0x639b6938, 0x53af07b7, 0x591df652, 0xdf2477ea, 0x32f0506e,
-	0x5789e975, 0x54efd0ed, 0x1e3cc7bd, 0xe9b3bfbe, 0x619faa5c, 0x3a33f41c,
-	0xf066985f, 0xd71f3a3c, 0x7148c3bd, 0xc1acdcd2, 0xcfd41c52, 0x11b45259,
-	0xab4b99d3, 0x728f9d1e, 0xcd94d5b8, 0xf9f2358f, 0x114e0835, 0xed91f4e5,
-	0xb842ceb7, 0x7fc4df9d, 0xfb61abff, 0xc2ddfa30, 0xafdee4fe, 0xf9eff89a,
-	0xa264dd3d, 0x2b26d9f4, 0xcfeba3c3, 0xff29d935, 0x4a0e4daf, 0xcd3cf4d9,
-	0xd7f4d8ef, 0xe14b88df, 0xb973bbf4, 0x3bf4cdab, 0x39460d88, 0x2bc03c75,
-	0x1ddaaaed, 0xc2eb280f, 0xbdb2b8f7, 0x0e1113c9, 0x3e2c0fb9, 0x75b3a686,
-	0x7d97df3c, 0x24eae4f3, 0x2c77d614, 0x7cc4f33d, 0x78fb7ef8, 0x270835f7,
-	0x148bb6d3, 0x607238a7, 0xbbc22555, 0xaf91877a, 0xf9f7594f, 0x8f71e94d,
-	0x75f97c62, 0x160dc53d, 0xc4f33b6d, 0x877f0c03, 0x9821b177, 0xbd74afde,
-	0x7ee78f57, 0xaaf8e5e6, 0x78fc383f, 0x449b5abe, 0xf803b3fc, 0xf3a7f32a,
-	0xcba5a2d5, 0xc6cb7e08, 0xb8426fbb, 0x937bd79d, 0x0fce9f90, 0xee744b1f,
-	0xf820457d, 0xdbbc72ab, 0xbfe056af, 0x575b6c50, 0xc723dc98, 0x04b961bf,
-	0x3e0743df, 0xf9fb474d, 0x3fe5fd9b, 0x6097eeb8, 0x1861fedd, 0x1a5133af,
-	0xe0df3dfa, 0xf584ea19, 0x3ef3f7e5, 0x6af1d2e8, 0x539f9ffc, 0x36213fc0,
-	0xe6219df8, 0xd4f9828d, 0x61fc141c, 0x26cfa859, 0xbf43a67d, 0x8fcffc11,
-	0x198ce734, 0x9f4828fb, 0xcbdf37f7, 0x4fd875a5, 0x1ddc8f5a, 0xfcc89ef9,
-	0x547b7a41, 0x83f98c20, 0x73f6edc6, 0xfb40cca0, 0x1724f14e, 0x2e786f10,
-	0xe181c2ec, 0x99ff303b, 0xc2f1e381, 0xf14f604b, 0xf2931078, 0xd9f9d67b,
-	0x50b22f81, 0xb7ae86ce, 0x882fe5ee, 0xaff66a3e, 0xfad028ba, 0xcba67f27,
-	0x0ffafcba, 0x1645f53d, 0x7d33efe2, 0xb6fd1f20, 0x1640860b, 0xb7eea1e2,
-	0x58ff9e5c, 0xf3e5a838, 0xf7e81b57, 0x1304eb3a, 0xf48949d1, 0x2e1fc525,
-	0x87f1e71c, 0x924f03ba, 0xc83aed3c, 0xc48b40e3, 0x8c38d2f6, 0x399fd49b,
-	0xcbacf286, 0xe831fdce, 0x2b71de9f, 0x41e8aa1c, 0xde12675d, 0x4dd83bf7,
-	0x3c8fdc0f, 0x0c3bfc8f, 0xf3a369fb, 0x9c2b2cbd, 0x39f15da1, 0x7c30f3f2,
-	0x257930bf, 0xdf79f9d2, 0x8f941cc0, 0xadfd666f, 0xbf86e28e, 0xb27ba70f,
-	0xe6926db5, 0x3af7799c, 0x703f127c, 0x29fb54c4, 0xe7c1c99c, 0x1b8e0cb9,
-	0x837e6ec8, 0xba2e13ef, 0x7b13f38a, 0xed53f399, 0x7b0643f2, 0x15bb7f50,
-	0xc8ed527e, 0x1bffbf29, 0x85b3e5f1, 0xd504fd32, 0xffc7a54f, 0x4cf7fe9f,
-	0x33412fff, 0x800063ec, 0x00008000, 0x00088b1f, 0x00000000, 0x5aa5ff00,
-	0x5554700d, 0xbdef3e96, 0xdd2749fe, 0x12421349, 0x42068408, 0x03621a88,
-	0xc4d67281, 0x206efce9, 0x6b01bb33, 0x8d08c42d, 0x749d2422, 0x6aece882,
-	0x021a6eb9, 0x367564ac, 0x1d47598c, 0x809f9b47, 0x9476ec28, 0x0da0c040,
-	0x6ba2cb0a, 0x3a26aa45, 0xab545b55, 0xa6e00eac, 0xd63b8223, 0x3be7b8e2,
-	0x1dddb5ef, 0xa6ed4fe2, 0xee7dba8a, 0x9ee7b9cf, 0xce77ce7b, 0x52b48f3d,
-	0x6a22ca22, 0x2a08cdcf, 0x6ea6ff0a, 0x6d4445a2, 0xf67f2429, 0xaf1f4541,
-	0x7dbc64d3, 0x58c9a340, 0xce08eb93, 0x4754419e, 0x459a26dd, 0x654284b4,
-	0x29bf71a4, 0x795bcbf2, 0x6d0dfebc, 0x61931741, 0xb06aad1b, 0x7aa6d513,
-	0x1314360b, 0xaacaab0d, 0x0bcc6286, 0x4b9d2e95, 0x7efe0df4, 0x879b744a,
-	0x2a224f99, 0xf60f14d3, 0x169c9d1b, 0x8b5dc9dc, 0x491bfb97, 0xeaa7984d,
-	0x534f98f3, 0xa3827c08, 0xd81d4b25, 0x9964b468, 0x8eef3e23, 0x07d6d237,
-	0xd2a14e31, 0xf9f6123b, 0x68858f4b, 0xcb17d121, 0x650faa17, 0xdaae79f2,
-	0x51337403, 0x29ed768d, 0x70ddf785, 0x05564ccc, 0xafbc67fc, 0x670239f2,
-	0xfa65ea34, 0x790a4752, 0x4bceccac, 0x1bcf0f1e, 0xd8293b99, 0x3f6fe7c5,
-	0xe78990a0, 0xeeb11db5, 0x6d79e14c, 0x9bb648e6, 0xf036ddf7, 0xdb878b3b,
-	0x2cf7fef6, 0xcf58b9ae, 0x9e433647, 0x6dfa1514, 0x174ff277, 0xce607f91,
-	0x3f3177fb, 0xf44d69ff, 0x67bd37ed, 0x05d7d621, 0x5afd8f9e, 0x82d5f60e,
-	0x56f0a56e, 0x3cfdda27, 0x9bbf48af, 0xe5dff86f, 0xb386575c, 0xf8be7e38,
-	0xa7a25d39, 0x69f8bd18, 0xd602f73e, 0x43eb468b, 0x21ee5976, 0x6e717b96,
-	0x252e8ece, 0x5fae9d71, 0x4b69768f, 0x9d15cb0e, 0x6615b8a9, 0x6c0d4d15,
-	0x851f4276, 0x1797b38a, 0xb97f5f47, 0x9bf42d74, 0x9dbd2c12, 0x90b517cf,
-	0xc7e2c7dc, 0x04b49bb6, 0x6a0f1679, 0x3443dc1e, 0xc90e9a95, 0xe2a77bbd,
-	0x61bca83e, 0xd61267a9, 0x2b7bbe8d, 0x7955196f, 0x73fafdbd, 0x7975ca04,
-	0xc9a9b0ce, 0xd7721b7d, 0x80ede5e7, 0xc400d9fe, 0xfaa94e8e, 0xc7951efe,
-	0xbfd7c7e7, 0x46a79c68, 0xf089ce2b, 0x9dc506f8, 0x9f671ce3, 0xf587bb58,
-	0xe9ef86be, 0xb46fbe45, 0x6938752f, 0xfda26ccd, 0xff42b91d, 0xda4b8773,
-	0xf4914750, 0x16e1d2bf, 0x2dc760fa, 0xf0ea1f42, 0x51d03d08, 0x8ed1ed27,
-	0x033fe906, 0x708cff51, 0xe2ec20a0, 0x4a6d7c14, 0x1cce1e9c, 0x9e494f43,
-	0x24a99c3f, 0x991453d3, 0x3cb870ff, 0xa5fa6018, 0x939ca732, 0xc0d1ca8d,
-	0x4b4e68fa, 0xb40ca12f, 0x674a41f9, 0x037bb1bb, 0x3ffbb61e, 0x43daedd4,
-	0x4bcfc533, 0xf33aaf30, 0xdbf846ce, 0x692b2ce5, 0x1ec3cfac, 0xde63dfef,
-	0x0555d3e9, 0x683fd1db, 0xfef95b73, 0x94dc5787, 0xff47bd01, 0xb78d234d,
-	0xb05a28ae, 0x0ae994b9, 0xcc7622bb, 0xc86e6efc, 0x4fc6bb66, 0xb83553e6,
-	0xe3a4d4ba, 0x02b67384, 0xc1aeb7fd, 0xdb261b3e, 0xfc795816, 0x57f7b94a,
-	0xf7a627d8, 0x0aeb29da, 0xd98bd0bc, 0xf3cabef5, 0xa66eff02, 0x80f79e5e,
-	0xdf649dc3, 0x822bcb47, 0x45c59bb0, 0x07cf36b3, 0xd9ba767f, 0xf5bb3fbc,
-	0x51e7c87e, 0xc14e94d3, 0xb8099731, 0xf3fdc410, 0x452e953e, 0x716c30ec,
-	0x7f993299, 0x2b22b538, 0x194eebc0, 0xb8da7df7, 0x7dc633ef, 0xd5fdc3bf,
-	0xfdcbbedc, 0x1fb88768, 0x9e988aed, 0xd085a34d, 0x0da7f05f, 0xef44792f,
-	0xa3a0f9a3, 0x3b0e5a66, 0xd33f025c, 0x81bf27f1, 0x5ca278e5, 0x036ee397,
-	0x6b6e867f, 0x85d7d3e8, 0x858b4f84, 0x4bffb0bc, 0x9f609f58, 0xf5f175b1,
-	0x9bb2ed24, 0xe7c29029, 0x20b6c3a0, 0x895344f4, 0x0ecb5f80, 0x692e08e7,
-	0xcf8ab329, 0x017a644f, 0xabd29e09, 0xae5e7d56, 0x85fc216b, 0x8cfb2475,
-	0x9980d504, 0x399fc4ed, 0xf2c99854, 0x167e188e, 0x49fd0fa3, 0xcff6fc13,
-	0xd7db9a67, 0xfe7cfd14, 0x13854365, 0xa9b15eb0, 0x4eff33b0, 0xe1acfc7d,
-	0x0699fe87, 0x943ce33f, 0x7dc7ca12, 0xce1d8f44, 0x2ee987bf, 0x1ead787b,
-	0x8285c207, 0x5c2e14df, 0x42549c06, 0xd44dc8e7, 0xaf7dfc77, 0x47d027e9,
-	0xfdd079e8, 0xd3af7fc7, 0x6739df4a, 0x50a4f8e2, 0xfd04e2be, 0x3df74181,
-	0x409dc13f, 0x87395f9b, 0xdfa6cb71, 0x3327ab7b, 0xa783586e, 0xff37603b,
-	0xed97dba2, 0xd027ff40, 0x2b11cb5b, 0x0f2b2ec1, 0x0af67ff4, 0x3bf4b78f,
-	0xa8fb80dc, 0xbbe88667, 0xc7dec8f3, 0x7d236f61, 0xae87f166, 0xfe7bbffd,
-	0x25679911, 0x35bd5b98, 0xcfbc4a54, 0xe37fe3d1, 0xb49f6135, 0x6fd015d0,
-	0x39179c57, 0xfeea27ea, 0xa9f1543d, 0xf5bd0037, 0xc46bf81f, 0x0a0cfab5,
-	0x65e96ec0, 0xe46647be, 0x6a86f57b, 0xc771e12a, 0x6ff04ad0, 0x86eac97b,
-	0xcd5efa9d, 0x5f1f84a9, 0xfb14ccf3, 0x3bb1be6b, 0x3d57711f, 0x23cf6fba,
-	0x23679859, 0xc99edbc8, 0xf57ac476, 0xdd163b69, 0x6bb7f72f, 0xf7206fcf,
-	0x64ed1b3e, 0x03cccd3e, 0x99ef35fb, 0xd1f00c1d, 0xe3fafb5e, 0x1a87b895,
-	0xe83db9ed, 0xa6dbb2bf, 0x2d670f42, 0xf8728c9e, 0xbbb359e1, 0xba0ceb17,
-	0x2ea27879, 0x56a45a4f, 0x3bab2fee, 0x37d7711f, 0x80bfe1f1, 0xf75af5dc,
-	0x3ce2cff3, 0x3884ad7b, 0xeb1f6171, 0xe85dd78d, 0x2dc7cf35, 0x9873ec8f,
-	0x94972f60, 0x82cf95ee, 0xef3eaf7f, 0xf45bad92, 0x439de819, 0x11e78fd8,
-	0x6525f2e2, 0x85ff527b, 0x5e25bdde, 0x97c5dfd6, 0x09bd8bea, 0x17f31bf6,
-	0x526b6edf, 0x6024147c, 0xbf19f25c, 0x3b2019c9, 0x8366dfc7, 0x99e878bc,
-	0xbe296791, 0x737ee2fe, 0x6a3ac2d8, 0x94e6d2b6, 0xf83fb8cc, 0x0ebcfef2,
-	0x3ba9f3e7, 0x34c7910a, 0x84ac882f, 0x51b05c5f, 0x7bcf2e4a, 0xbe5f88db,
-	0x2a971b83, 0x4f2ddf25, 0xc7ee854d, 0x38f57357, 0x16c07576, 0x1ddf280c,
-	0x83a3fe8f, 0x8eccef9c, 0x67af77d3, 0x7e71297e, 0xad425b6f, 0x2db7de6e,
-	0x738fc753, 0xe33f7f3c, 0xcfb19558, 0xe79287aa, 0x299152df, 0x8966d3f6,
-	0xc60e2214, 0x88ac2ff8, 0x10a45ae1, 0x5d763578, 0xe013d23d, 0xe08acbc8,
-	0xf2a0ef88, 0xa86e96a1, 0x4fae3b34, 0xa8204a5f, 0x0f7f8c95, 0x7b8c8bb9,
-	0x55ef5e60, 0xdbe57ee8, 0x98d8f36f, 0x246a4b4f, 0xab53791d, 0x7c8e9223,
-	0x46a8e468, 0xcbeb8d3b, 0x199ff18a, 0x4649afdf, 0xf6643fb8, 0x8fdbc6d8,
-	0x6f3c438f, 0x2ab37e1d, 0xfdd0a93e, 0x4d2069a6, 0x646723f6, 0xe9b6ec11,
-	0x3875e4b9, 0x1fc133a7, 0x65760647, 0x8fe2137b, 0xaa3b90cf, 0x137e287c,
-	0x7ca3fafd, 0xa54f81d8, 0xf6ab0acd, 0x65b1af22, 0x3a294d0a, 0xe5b1b01d,
-	0xa7b4befb, 0x5e2e7ec2, 0x1e3f156d, 0x73822251, 0x0aae27b9, 0x23988c3e,
-	0xca8e7382, 0x18fc11ff, 0x09591099, 0xb4adcadc, 0xc9f196af, 0x1e2e9591,
-	0xa0c2b2ff, 0x03e491a7, 0x57322785, 0xb5ea4f03, 0x3711b7d1, 0x09d99769,
-	0x7be9893f, 0xa227a19d, 0x783b86c7, 0xb3410ffc, 0x4e61f10b, 0x0be462a5,
-	0xb5f9f896, 0x908d3fb8, 0xf841c0eb, 0xdddd9367, 0xfdc1a32b, 0xbc1f20af,
-	0xe5dddb33, 0x326f5eba, 0xcacae587, 0xee2d6afc, 0xfbdd3b29, 0xdfcc158f,
-	0x07c91c5f, 0x4bb5b1ce, 0xdd7b6a1c, 0x47fb13ba, 0x807ba3cd, 0xde1c175f,
-	0x9f582b27, 0xada196ad, 0x67d22ca5, 0xa429c8e6, 0x6f604bf8, 0xbdba2382,
-	0xb2ef148d, 0x561e9f08, 0x9767eb2a, 0x4b940f71, 0xa1f603b4, 0xe6fcf7e8,
-	0x00efabc0, 0x6686466f, 0xf58f4e09, 0x4f030ba7, 0x3e3703a6, 0x981ef8e0,
-	0x60ffef13, 0xfa0b5ef5, 0xc3b8bf97, 0x9ef6e112, 0xbbe7c9cd, 0x0cf6ed7c,
-	0x9e3d0bf8, 0xec7b0fd0, 0xeac7a649, 0x4e197605, 0xe88083f2, 0x29c79cfd,
-	0x0e54b7f2, 0xdf0f41b5, 0xd698cbd2, 0x6313e812, 0xa9f331e8, 0xce1fcf41,
-	0xb6f84879, 0x430f0b4e, 0xcc07236f, 0xe4ef7c04, 0x7f7426b8, 0x1aef105a,
-	0xadc700f5, 0x216e3d2c, 0x0fa4b45e, 0x8cbdc4ad, 0x989d5bf4, 0xa7c8e9bf,
-	0xdb3f38f9, 0xdbce3e63, 0x3670e472, 0xf78dcec1, 0x6cc7c704, 0x1ff4b78c,
-	0x24bbc6c9, 0x86aadfd6, 0x4717210a, 0x47e012b8, 0x85afdfac, 0x8b7f210b,
-	0xf1825432, 0xf996e428, 0x49a06b4c, 0xe8aad1ce, 0x34474f7e, 0xf7b1f9c1,
-	0x6e8551f6, 0x250f8caf, 0x1d3707c8, 0xb11254bd, 0xd9a0f1c7, 0xe81395c0,
-	0xdffdd62f, 0x09c0c8b9, 0xbf0cda5e, 0xbc27071f, 0xf5a3dc31, 0xae7dc816,
-	0xb63b9742, 0x3bcaf85e, 0x6de32023, 0x992a5daf, 0xc6758c59, 0xa3c04a3c,
-	0x017c7159, 0x0e0ae40e, 0xf367326c, 0x2bcf7cb9, 0xd25e4eee, 0x96b1b8dc,
-	0xd33ad3a7, 0x6bd0b5fd, 0x5de40513, 0xb1ae5637, 0x8570f476, 0x553ebf7e,
-	0xf6fb8f7f, 0x964ec128, 0x7d6322eb, 0x9bc17cee, 0x5d67f030, 0xf85ac6f5,
-	0x7e597ddf, 0xf9bbe24b, 0xedaff887, 0xadd7a649, 0x339b58df, 0x1efb9f8e,
-	0x126a7eda, 0xd9afcf5d, 0xdb36a3bb, 0x4c7f7d75, 0x98b68bee, 0x49e6959c,
-	0xbe58fa89, 0xb71276b1, 0xaffe52eb, 0x7dcfd0fa, 0x8c3588f1, 0xb5facbb8,
-	0xfdb7fce0, 0x0925bd71, 0x5f807fb7, 0x9d6b0533, 0xfe5bbe33, 0x12ab6db1,
-	0x4f80561e, 0xe2bd5fec, 0x0937ec67, 0x18aa6dfb, 0x5a68a753, 0x37791d3d,
-	0x4f4f5779, 0x6d8c53ac, 0xa8a72819, 0x49bd88b7, 0xd2b87ecb, 0x623e8e3d,
-	0xd4ae6ff3, 0x864d9f64, 0x6fa94f1d, 0x1e15e679, 0x53ccb97f, 0x557ec956,
-	0xbf92a9ae, 0xa6a7dd8f, 0x860fcf52, 0x80bf1db2, 0xcd07453d, 0xb949f84e,
-	0x4f33eba6, 0xfc2efcbd, 0xe1db2f31, 0x357e64ea, 0xbcfa6955, 0xea273663,
-	0x5f63d140, 0xffe07be5, 0xa5cbec5b, 0xd3b262ce, 0x953f1e64, 0x3df0573b,
-	0xc6c7cfb6, 0x7aa5693e, 0x645ed3be, 0x533afefe, 0x3adbe3b1, 0xc51be493,
-	0x12d9c169, 0xf890bf87, 0xe85c1d16, 0xf7c05cd4, 0xd6fe1da0, 0x677ff5fe,
-	0x0c8f0e23, 0x0bba67fe, 0xd3ed75b8, 0xb6cfd874, 0x81d38f81, 0x6606270f,
-	0x1d9ed039, 0x1fd03972, 0x16b8fbad, 0x368cbaf3, 0x8b30675e, 0xf636b19c,
-	0x13d58e7e, 0xcdd1de12, 0x73af6bd0, 0x614b2fdb, 0x82dda9ef, 0xce8efc63,
-	0xd788fc44, 0xe3395c19, 0xeb1265d5, 0xf5b3050c, 0xd45a033a, 0x7acc0a19,
-	0xea34019d, 0x6751680c, 0x0cea3f40, 0x006751a0, 0x68033a8d, 0xa2d019d4,
-	0x2bfe80ce, 0xbcb16ba8, 0x50de4e51, 0xecd1aadf, 0xf40fff82, 0xf5e4416a,
-	0x74d31c0f, 0xc412877a, 0xfbc67f7d, 0xaf460e23, 0x28b075e8, 0xe77953c7,
-	0xfbcb341f, 0x5eda1a20, 0xd6f71337, 0x5571b9af, 0xd9371117, 0xa3cddb14,
-	0x6a1f5127, 0x1bdc53ef, 0x2e5fe85d, 0x5c1b6c72, 0xfa237ef8, 0xd56ecd7b,
-	0x9abafb85, 0x6f97fa8d, 0x58ea57b0, 0x2cc739d5, 0x15fbcf72, 0xeffde1ca,
-	0x64efeab0, 0x2cbdc6bf, 0x9545b0f7, 0x1d6fda3c, 0xcb4bf792, 0x4d738a8b,
-	0x7eda1e42, 0x1382e7cb, 0x9df4b69d, 0xb21fd790, 0xc524d739, 0x7de48f57,
-	0xc174fc7e, 0x45433c8d, 0xa7d5af4c, 0x7b5edf90, 0xf9213801, 0xb47e4248,
-	0x33fcd9d6, 0x5da467e4, 0x7efce133, 0x644ee87e, 0x6d3dd6f9, 0xb09228fe,
-	0x9930737f, 0x6df60df6, 0x99c823cd, 0x034a8fdc, 0x943fb2e2, 0x74aa1fdc,
-	0xc6927d64, 0x3cd1e63f, 0xff755be4, 0x3f40e6b4, 0xdbb977ef, 0x61caf92a,
-	0x2570f78f, 0xb349f1fb, 0x272fea47, 0xbde4d98f, 0x9cfb7e75, 0x8d4bfaa4,
-	0x1fea5536, 0xc48acc1b, 0xdee52bf1, 0xaacbb063, 0xeea57bba, 0x10eb9552,
-	0xe1d98e7f, 0x3786f2d1, 0x5cc377c0, 0x6abfd497, 0xe10bf4ac, 0xf72f7ec7,
-	0x7f16683c, 0x8254e9ab, 0xc9abd32a, 0xad7f816d, 0x3d8a7562, 0x298fed99,
-	0x78ab0fec, 0xbb04c6af, 0x915db0da, 0x100a42bc, 0x8695e7ac, 0xfe0d573e,
-	0xfb0a57eb, 0x3d56bdcb, 0x5553ce0f, 0xc5d79fe1, 0xdfe78b71, 0xfc0b5e47,
-	0x55c71d66, 0x5f671cb4, 0x37bf708f, 0x9ebe6a6d, 0xc072bbe7, 0x3319f57f,
-	0x726a4f01, 0x95e85e7e, 0xfced5f78, 0x095bef84, 0x737da5df, 0xa8e1f7d3,
-	0xc8493e89, 0x759a4f6b, 0xca7d61fc, 0xec14eb7b, 0x5e3eea55, 0x3474cf69,
-	0x8ca2bb49, 0x340bffc4, 0xe02f6f3d, 0x4a6672bb, 0xeb0fa2dd, 0x6eedda6b,
-	0x0b863fe8, 0xbefc8dbb, 0xe796e540, 0x5bd54eed, 0xdc29d30b, 0xca5b8d3f,
-	0xe7617e14, 0x5c71d47c, 0x3d4f3fc2, 0x7d05c0bb, 0x4377697c, 0xc739351f,
-	0x31dde1e6, 0x72ffe0cb, 0xdc55c359, 0x029d2797, 0x438f9fd8, 0x5adfacdd,
-	0x5d41481c, 0x50d1e43d, 0x38a63f27, 0x1ebfaef1, 0x716fb74f, 0x140acfc2,
-	0xb5b7ea27, 0xd935dda9, 0xe676bfcc, 0x9cf0370c, 0x61ea55f1, 0x76eadc23,
-	0x53506b70, 0x6ca6b5f4, 0xff0df3d4, 0x54a6f729, 0xd7f78a4d, 0x1d147e1b,
-	0xf11d22fc, 0x6dd447f5, 0x807f8377, 0x835eee6c, 0xfea0ec3f, 0xbf5269a6,
-	0xe5d1d98d, 0x613b39fd, 0xf4ab5347, 0xef8d8d75, 0x0c4f9199, 0xc1cde6dd,
-	0x7cd72bfe, 0xce5b25be, 0x8cbd7e39, 0xb8033771, 0x165eb63b, 0x463df1c3,
-	0x6b781dfd, 0x26baea32, 0x326baea3, 0xa326baea, 0xea326bae, 0xaea326ba,
-	0xbaea326b, 0x6baea326, 0x26baea32, 0x97ae13a9, 0x878eddf6, 0x08ea1da4,
-	0xbc4278c8, 0xc7eab9b8, 0x55175dd5, 0xa577538d, 0xc4865714, 0xbd7bf65d,
-	0xcea63dde, 0x26aefeca, 0xe0d57bf8, 0x431e7b84, 0x7163d25e, 0x6b5438b3,
-	0x603c16f1, 0x54f07c17, 0x8d6f5b8d, 0xf52ecfe9, 0x9b64cbd9, 0x2ca87b8f,
-	0x5152659a, 0x23ee34c7, 0xdf84ef56, 0x1bf09ce0, 0xd31bf0b4, 0xfcdfb8ec,
-	0x5daec2d6, 0x0109e7aa, 0x726c13c9, 0x32375bbf, 0x2f7d30ae, 0xe5709339,
-	0xc2b831b3, 0x90159a0f, 0x95a0ed63, 0x233f74ba, 0x37254ff8, 0x0e3f9c7f,
-	0x9c7484ce, 0xda1a9699, 0xb5a67d87, 0x1791baa5, 0x9d8bbfb3, 0x88a6dc9d,
-	0x06a1afbf, 0xbc1c77d9, 0x7c9e4749, 0x73d1c4ef, 0xf7f9e1bf, 0xf25d83fe,
-	0xd793ad9d, 0xe0fffa2e, 0xae954d4d, 0x84775f8f, 0x9659e77d, 0x43b654ea,
-	0x16d5578e, 0xb8ba922a, 0x50fe2a9a, 0x58ae3da3, 0xd377a380, 0xb577dc3c,
-	0xc839e1b5, 0x2efec399, 0xa32cdfef, 0x6a1a6bbe, 0xd9f4cbde, 0xbe373cec,
-	0x3dcd4dab, 0x800b0544, 0xb0c57547, 0xadd4b3ab, 0x1963dd60, 0xbf83bfde,
-	0xa7cc5edc, 0x96fee356, 0xb3b69753, 0xce63ee4b, 0x32fbdc42, 0xf51fabab,
-	0x9e6f2d86, 0xb2c27a90, 0xd442d70c, 0x79bcb61b, 0x5c73a75a, 0xe51b8afd,
-	0xabab13b2, 0x66f8827f, 0x109f3eeb, 0x09a1fd67, 0xc0fb7449, 0x09f3eee4,
-	0x3f05ae71, 0x3f4e9df8, 0xafb84c53, 0x5c944356, 0xf21dbbd5, 0x4bfeebf9,
-	0xa8d3cf7f, 0xaaa7c9c4, 0x749c5c74, 0xe7b0c282, 0xf90ec5d1, 0x713397fe,
-	0xdbd43cfd, 0x10b5d8a8, 0xfdaf38f3, 0xe2f8ec35, 0xc1a79ead, 0x7738cf27,
-	0x3579f10e, 0x0d90c758, 0xbbe319ed, 0xdbd529e4, 0x3d36b688, 0x357e9260,
-	0x6df68a58, 0xfa20f435, 0x81762fd9, 0xf393ed4f, 0x3a622c6e, 0xb79a1acf,
-	0xe9788ede, 0x73fe8dd9, 0xec5e9e65, 0xdfeeb637, 0xe58f9c69, 0xc37987d9,
-	0xf9e4aa85, 0x6dea37c3, 0x55c22ecc, 0x371d0e3a, 0x93aca8fc, 0x58e7fbe4,
-	0xa55e39fb, 0xfdf9781a, 0x47bcb372, 0x7e4c4f20, 0x0a5d5eea, 0xa3de5879,
-	0x61afbc86, 0x5299ec9c, 0x7b6ef98f, 0xc77ec80d, 0x7c653b0d, 0xe3af396c,
-	0xa685b4a3, 0x0de404e0, 0x4e0d1e53, 0x7653bc80, 0xdc5cda8c, 0xb51810be,
-	0xe1787f21, 0xe86d476f, 0x7543c17f, 0x56bfe1e3, 0xc2df09ad, 0x3f5951b2,
-	0x921af79d, 0x04e8c277, 0x4d856fe4, 0x6c02596f, 0xe69e73b7, 0xb7f2937d,
-	0xd3638922, 0xfe9a5b0d, 0x87b04aa8, 0xe490cfe9, 0x259d54ab, 0xdd14bee3,
-	0x3e8f7dff, 0x6e8ec2a8, 0x09dcb208, 0x69e737f6, 0x1248e5d3, 0x6bacb0df,
-	0xf3837031, 0x3f71a4b5, 0x3cbe4733, 0xe423c0c5, 0x378c8d8f, 0xbeb7a6fe,
-	0x79c8be42, 0x8c7e18dc, 0x261c314d, 0xebef5dc4, 0x20fc1711, 0xbbdade79,
-	0xf78ad91e, 0x76e3536d, 0xd78fbc8b, 0xdb456df4, 0x259efada, 0x4cbf2487,
-	0x65f9cf9a, 0x9c9d7d12, 0x7b68e463, 0x39adf3f0, 0x76cbece3, 0x0ed12d70,
-	0x37439a4e, 0xd27abde0, 0x480eea9f, 0x0fdd091c, 0x6ad9d97c, 0xecae2377,
-	0xd8a555fa, 0xa9f5b7d7, 0xfaa98f32, 0xa751d947, 0x52540fcc, 0x87e6fc11,
-	0xe1e011da, 0x0c3c24ec, 0x8972dd48, 0xddae7043, 0xadb60778, 0x123e4a71,
-	0x5336ebf3, 0x98adc3e8, 0xef90e597, 0x45b70c11, 0x6f7c2ca6, 0x4aeee29a,
-	0x2ece2bc8, 0x9d041599, 0x830a19dd, 0x15cfe8ef, 0xd5c8ea37, 0xd6ae3a69,
-	0x7bad0da8, 0x352dfc79, 0x5bf1b82c, 0x6ff307e0, 0x7697acb7, 0xb14cd945,
-	0x290a5cdb, 0x7067fffa, 0x3d7bc42d, 0x67ad3df6, 0x20efb05b, 0xf04afbde,
-	0x8fa8b599, 0xe45d95fe, 0x80d50689, 0x33d3cf99, 0x7bb70481, 0xb8942cee,
-	0xc686a513, 0x2cff91fb, 0x6a3a954f, 0x13d704cf, 0xd3da6ef8, 0xf5e4a37c,
-	0xc7a4fe87, 0x29a5d1fb, 0x3d71e46e, 0x711b5cf3, 0x5d479eae, 0xa29afe32,
-	0xa13c0bf3, 0xa967a7eb, 0xe69ece7e, 0xc59f794c, 0x8767a1ee, 0xbfbe3267,
-	0xe5bc3259, 0x1803a8d5, 0x667b1fdf, 0x4fb73f70, 0xde770d29, 0x75733e07,
-	0xb9945779, 0xde4edee4, 0x7b13e379, 0xf1867d74, 0x897dac1d, 0xfefde923,
-	0xcb80febf, 0x002220b3, 0x00000000
-};
-
-#endif /*__BNX2X_INIT_VALUES_H__*/
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ad5ef25add3..fbf1352e9c1 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -53,12 +53,19 @@
 
 #include "bnx2x.h"
 #include "bnx2x_init.h"
+#include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.48.105"
-#define DRV_MODULE_RELDATE	"2009/03/02"
+#define DRV_MODULE_VERSION	"1.48.105-1"
+#define DRV_MODULE_RELDATE	"2009/04/22"
 #define BNX2X_BC_VER		0x040200
 
+#include <linux/firmware.h>
+#include "bnx2x_fw_file_hdr.h"
+/* FW files */
+#define FW_FILE_PREFIX_E1		"bnx2x-e1-"
+#define FW_FILE_PREFIX_E1H		"bnx2x-e1h-"
+
 /* Time in jiffies before concluding the transmitter is hung */
 #define TX_TIMEOUT		(5*HZ)
 
@@ -1539,7 +1546,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 						    len, cqe, comp_ring_cons);
 #ifdef BNX2X_STOP_ON_ERROR
 					if (bp->panic)
-						return -EINVAL;
+						return 0;
 #endif
 
 					bnx2x_update_sge_prod(fp,
@@ -5232,13 +5239,15 @@ static void bnx2x_gunzip_end(struct bnx2x *bp)
 	}
 }
 
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
 {
 	int n, rc;
 
 	/* check gzip header */
-	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED))
+	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
+		BNX2X_ERR("Bad gzip header\n");
 		return -EINVAL;
+	}
 
 	n = 10;
 
@@ -5247,7 +5256,7 @@ static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
 	if (zbuf[3] & FNAME)
 		while ((zbuf[n++] != 0) && (n < len));
 
-	bp->strm->next_in = zbuf + n;
+	bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
 	bp->strm->avail_in = len - n;
 	bp->strm->next_out = bp->gunzip_buf;
 	bp->strm->avail_out = FW_BUF_SIZE;
@@ -5369,8 +5378,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	msleep(50);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
 	msleep(50);
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 
 	DP(NETIF_MSG_HW, "part2\n");
 
@@ -5434,8 +5443,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	msleep(50);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
 	msleep(50);
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 #ifndef BCM_ISCSI
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
@@ -5510,7 +5519,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
-	bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
+	bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp));
 
@@ -5518,14 +5527,14 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	msleep(30);
 	REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
 
-	bnx2x_init_block(bp, PXP_COMMON_START, PXP_COMMON_END);
+	bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1(bp)) {
 		/* enable HW interrupt from PXP on USDM overflow
 		   bit 16 on INT_MASK_0 */
 		REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
 	}
 
-	bnx2x_init_block(bp, PXP2_COMMON_START, PXP2_COMMON_END);
+	bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE);
 	bnx2x_init_pxp(bp);
 
 #ifdef __BIG_ENDIAN
@@ -5571,60 +5580,60 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
 	REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
 
-	bnx2x_init_block(bp, DMAE_COMMON_START, DMAE_COMMON_END);
+	bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE);
 
 	/* clean the DMAE memory */
 	bp->dmae_ready = 1;
 	bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8);
 
-	bnx2x_init_block(bp, TCM_COMMON_START, TCM_COMMON_END);
-	bnx2x_init_block(bp, UCM_COMMON_START, UCM_COMMON_END);
-	bnx2x_init_block(bp, CCM_COMMON_START, CCM_COMMON_END);
-	bnx2x_init_block(bp, XCM_COMMON_START, XCM_COMMON_END);
+	bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE);
 
 	bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
 
-	bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
+	bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
 	/* soft reset pulse */
 	REG_WR(bp, QM_REG_SOFT_RESET, 1);
 	REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
 #ifdef BCM_ISCSI
-	bnx2x_init_block(bp, TIMERS_COMMON_START, TIMERS_COMMON_END);
+	bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
 #endif
 
-	bnx2x_init_block(bp, DQ_COMMON_START, DQ_COMMON_END);
+	bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE);
 	REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
 	if (!CHIP_REV_IS_SLOW(bp)) {
 		/* enable hw interrupt from doorbell Q */
 		REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
 	}
 
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
-	bnx2x_init_block(bp, TSDM_COMMON_START, TSDM_COMMON_END);
-	bnx2x_init_block(bp, CSDM_COMMON_START, CSDM_COMMON_END);
-	bnx2x_init_block(bp, USDM_COMMON_START, USDM_COMMON_END);
-	bnx2x_init_block(bp, XSDM_COMMON_START, XSDM_COMMON_END);
+	bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
 
 	bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 
-	bnx2x_init_block(bp, TSEM_COMMON_START, TSEM_COMMON_END);
-	bnx2x_init_block(bp, USEM_COMMON_START, USEM_COMMON_END);
-	bnx2x_init_block(bp, CSEM_COMMON_START, CSEM_COMMON_END);
-	bnx2x_init_block(bp, XSEM_COMMON_START, XSEM_COMMON_END);
+	bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE);
 
 	/* sync semi rtc */
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
@@ -5632,16 +5641,16 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
 	       0x80000000);
 
-	bnx2x_init_block(bp, UPB_COMMON_START, UPB_COMMON_END);
-	bnx2x_init_block(bp, XPB_COMMON_START, XPB_COMMON_END);
-	bnx2x_init_block(bp, PBF_COMMON_START, PBF_COMMON_END);
+	bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
 
 	REG_WR(bp, SRC_REG_SOFT_RST, 1);
 	for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
 		REG_WR(bp, i, 0xc0cac01a);
 		/* TODO: replace with something meaningful */
 	}
-	bnx2x_init_block(bp, SRCH_COMMON_START, SRCH_COMMON_END);
+	bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
 	REG_WR(bp, SRC_REG_SOFT_RST, 0);
 
 	if (sizeof(union cdu_context) != 1024)
@@ -5649,7 +5658,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		printk(KERN_ALERT PFX "please adjust the size of"
 		       " cdu_context(%ld)\n", (long)sizeof(union cdu_context));
 
-	bnx2x_init_block(bp, CDU_COMMON_START, CDU_COMMON_END);
+	bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
 	val = (4 << 24) + (0 << 12) + 1024;
 	REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
 	if (CHIP_IS_E1(bp)) {
@@ -5658,7 +5667,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		REG_WR(bp, CDU_REG_CDU_DEBUG, 0);
 	}
 
-	bnx2x_init_block(bp, CFC_COMMON_START, CFC_COMMON_END);
+	bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
 	REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
 	/* enable context validation interrupt from CFC */
 	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
@@ -5666,20 +5675,25 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	/* set the thresholds to prevent CFC/CDU race */
 	REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
 
-	bnx2x_init_block(bp, HC_COMMON_START, HC_COMMON_END);
-	bnx2x_init_block(bp, MISC_AEU_COMMON_START, MISC_AEU_COMMON_END);
+	bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
 
 	/* PXPCS COMMON comes here */
+	bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
 	/* Reset PCIE errors for debug */
 	REG_WR(bp, 0x2814, 0xffffffff);
 	REG_WR(bp, 0x3820, 0xffffffff);
 
 	/* EMAC0 COMMON comes here */
+	bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
 	/* EMAC1 COMMON comes here */
+	bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
 	/* DBU COMMON comes here */
+	bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
 	/* DBG COMMON comes here */
+	bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
 
-	bnx2x_init_block(bp, NIG_COMMON_START, NIG_COMMON_END);
+	bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1H(bp)) {
 		REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp));
 		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp));
@@ -5763,6 +5777,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 static int bnx2x_init_port(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
+	int init_stage = port ? PORT1_STAGE : PORT0_STAGE;
 	u32 low, high;
 	u32 val;
 
@@ -5771,7 +5786,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
 
 	/* Port PXP comes here */
+	bnx2x_init_block(bp, PXP_BLOCK, init_stage);
 	/* Port PXP2 comes here */
+	bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
 #ifdef BCM_ISCSI
 	/* Port0  1
 	 * Port1  385 */
@@ -5798,21 +5815,19 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
 #endif
 	/* Port CMs come here */
-	bnx2x_init_block(bp, (port ? XCM_PORT1_START : XCM_PORT0_START),
-			     (port ? XCM_PORT1_END : XCM_PORT0_END));
+	bnx2x_init_block(bp, XCM_BLOCK, init_stage);
 
 	/* Port QM comes here */
 #ifdef BCM_ISCSI
 	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
 	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
 
-	bnx2x_init_block(bp, func ? TIMERS_PORT1_START : TIMERS_PORT0_START,
-			     func ? TIMERS_PORT1_END : TIMERS_PORT0_END);
+	bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
 #endif
 	/* Port DQ comes here */
+	bnx2x_init_block(bp, DQ_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, (port ? BRB1_PORT1_START : BRB1_PORT0_START),
-			     (port ? BRB1_PORT1_END : BRB1_PORT0_END));
+	bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
 	if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) {
 		/* no pause for emulation and FPGA */
 		low = 0;
@@ -5837,25 +5852,27 @@ static int bnx2x_init_port(struct bnx2x *bp)
 
 
 	/* Port PRS comes here */
+	bnx2x_init_block(bp, PRS_BLOCK, init_stage);
 	/* Port TSDM comes here */
+	bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
 	/* Port CSDM comes here */
+	bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
 	/* Port USDM comes here */
+	bnx2x_init_block(bp, USDM_BLOCK, init_stage);
 	/* Port XSDM comes here */
+	bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? TSEM_PORT1_START : TSEM_PORT0_START,
-			     port ? TSEM_PORT1_END : TSEM_PORT0_END);
-	bnx2x_init_block(bp, port ? USEM_PORT1_START : USEM_PORT0_START,
-			     port ? USEM_PORT1_END : USEM_PORT0_END);
-	bnx2x_init_block(bp, port ? CSEM_PORT1_START : CSEM_PORT0_START,
-			     port ? CSEM_PORT1_END : CSEM_PORT0_END);
-	bnx2x_init_block(bp, port ? XSEM_PORT1_START : XSEM_PORT0_START,
-			     port ? XSEM_PORT1_END : XSEM_PORT0_END);
+	bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, USEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
 
 	/* Port UPB comes here */
+	bnx2x_init_block(bp, UPB_BLOCK, init_stage);
 	/* Port XPB comes here */
+	bnx2x_init_block(bp, XPB_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? PBF_PORT1_START : PBF_PORT0_START,
-			     port ? PBF_PORT1_END : PBF_PORT0_END);
+	bnx2x_init_block(bp, PBF_BLOCK, init_stage);
 
 	/* configure PBF to work without PAUSE mtu 9000 */
 	REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
@@ -5885,18 +5902,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	/* Port SRCH comes here */
 #endif
 	/* Port CDU comes here */
+	bnx2x_init_block(bp, CDU_BLOCK, init_stage);
 	/* Port CFC comes here */
+	bnx2x_init_block(bp, CFC_BLOCK, init_stage);
 
 	if (CHIP_IS_E1(bp)) {
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 	}
-	bnx2x_init_block(bp, port ? HC_PORT1_START : HC_PORT0_START,
-			     port ? HC_PORT1_END : HC_PORT0_END);
+	bnx2x_init_block(bp, HC_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? MISC_AEU_PORT1_START :
-				    MISC_AEU_PORT0_START,
-			     port ? MISC_AEU_PORT1_END : MISC_AEU_PORT0_END);
+	bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage);
 	/* init aeu_mask_attn_func_0/1:
 	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
 	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
@@ -5905,13 +5921,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	       (IS_E1HMF(bp) ? 0xF7 : 0x7));
 
 	/* Port PXPCS comes here */
+	bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
 	/* Port EMAC0 comes here */
+	bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
 	/* Port EMAC1 comes here */
+	bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
 	/* Port DBU comes here */
+	bnx2x_init_block(bp, DBU_BLOCK, init_stage);
 	/* Port DBG comes here */
+	bnx2x_init_block(bp, DBG_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? NIG_PORT1_START : NIG_PORT0_START,
-			     port ? NIG_PORT1_END : NIG_PORT0_END);
+	bnx2x_init_block(bp, NIG_BLOCK, init_stage);
 
 	REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
 
@@ -5931,7 +5951,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	}
 
 	/* Port MCP comes here */
+	bnx2x_init_block(bp, MCP_BLOCK, init_stage);
 	/* Port DMAE comes here */
+	bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
 
 	switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
@@ -6036,7 +6058,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
 	if (CHIP_IS_E1H(bp)) {
 		for (i = 0; i < 9; i++)
 			bnx2x_init_block(bp,
-					 cm_start[func][i], cm_end[func][i]);
+					 cm_blocks[i], FUNC0_STAGE + func);
 
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
 		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
@@ -6049,7 +6071,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 	}
-	bnx2x_init_block(bp, hc_limits[func][0], hc_limits[func][1]);
+	bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func);
 
 	/* Reset PCIE errors for debug */
 	REG_WR(bp, 0x2114, 0xffffffff);
@@ -10595,7 +10617,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	mmiowb();
 
 	fp->tx_bd_prod += nbd;
-	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
 		/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
@@ -11082,6 +11103,190 @@ static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
 	val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
 	return val;
 }
+static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
+{
+	struct bnx2x_fw_file_hdr *fw_hdr;
+	struct bnx2x_fw_file_section *sections;
+	u16 *ops_offsets;
+	u32 offset, len, num_ops;
+	int i;
+	const struct firmware *firmware = bp->firmware;
+	const u8 * fw_ver;
+
+	if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
+		return -EINVAL;
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
+	sections = (struct bnx2x_fw_file_section *)fw_hdr;
+
+	/* Make sure none of the offsets and sizes make us read beyond
+	 * the end of the firmware data */
+	for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
+		offset = be32_to_cpu(sections[i].offset);
+		len = be32_to_cpu(sections[i].len);
+		if (offset + len > firmware->size) {
+			printk(KERN_ERR PFX "Section %d length is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Likewise for the init_ops offsets */
+	offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
+	ops_offsets = (u16 *)(firmware->data + offset);
+	num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
+
+	for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
+		if (be16_to_cpu(ops_offsets[i]) > num_ops) {
+			printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Check FW version */
+	offset = be32_to_cpu(fw_hdr->fw_version.offset);
+	fw_ver = firmware->data + offset;
+	if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
+	    (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
+	    (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
+	    (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+		printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
+				    " Should be %d.%d.%d.%d\n",
+		       fw_ver[0], fw_ver[1], fw_ver[2],
+		       fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
+		       BCM_5710_FW_MINOR_VERSION,
+		       BCM_5710_FW_REVISION_VERSION,
+		       BCM_5710_FW_ENGINEERING_VERSION);
+                return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i;
+	const __be32 *source = (const __be32*)_source;
+	u32 *target = (u32*)_target;
+
+	for (i = 0; i < n/4; i++)
+		target[i] = be32_to_cpu(source[i]);
+}
+
+/*
+   Ops array is stored in the following format:
+   {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
+ */
+static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i, j, tmp;
+	const __be32 *source = (const __be32*)_source;
+	struct raw_op *target = (struct raw_op*)_target;
+
+	for (i = 0, j = 0; i < n/8; i++, j+=2) {
+		tmp = be32_to_cpu(source[j]);
+		target[i].op = (tmp >> 24) & 0xff;
+		target[i].offset =  tmp & 0xffffff;
+		target[i].raw_data = be32_to_cpu(source[j+1]);
+	}
+}
+static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i;
+	u16 *target = (u16*)_target;
+	const __be16 *source = (const __be16*)_source;
+
+	for (i = 0; i < n/2; i++)
+		target[i] = be16_to_cpu(source[i]);
+}
+
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+	do {   \
+		u32 len = be32_to_cpu(fw_hdr->arr.len);   \
+		bp->arr = kmalloc(len, GFP_KERNEL);  \
+		if (!bp->arr) { \
+			printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \
+			goto lbl; \
+		} \
+		func(bp->firmware->data + \
+			be32_to_cpu(fw_hdr->arr.offset), \
+			(u8*)bp->arr, len); \
+	} while (0)
+
+
+static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
+{
+	char fw_file_name[40] = {0};
+        int rc, offset;
+	struct bnx2x_fw_file_hdr *fw_hdr;
+
+	/* Create a FW file name */
+	if (CHIP_IS_E1(bp))
+                offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+	else
+		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
+
+	sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
+		BCM_5710_FW_MAJOR_VERSION,
+                BCM_5710_FW_MINOR_VERSION,
+                BCM_5710_FW_REVISION_VERSION,
+                BCM_5710_FW_ENGINEERING_VERSION);
+
+	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+
+	rc = request_firmware(&bp->firmware, fw_file_name, dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	rc = bnx2x_check_firmware(bp);
+	if (rc) {
+		printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
+
+	/* Initialize the pointers to the init arrays */
+	/* Blob */
+	BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
+
+	/* Opcodes */
+	BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
+
+	/* Offsets */
+	BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
+
+	/* STORMs firmware */
+	bp->tsem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+	bp->tsem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+	bp->usem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+	bp->usem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->usem_pram_data.offset);
+	bp->xsem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+	bp->xsem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+	bp->csem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+	bp->csem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->csem_pram_data.offset);
+
+	return 0;
+init_offsets_alloc_err:
+	kfree(bp->init_ops);
+init_ops_alloc_err:
+	kfree(bp->init_data);
+request_firmware_exit:
+	release_firmware(bp->firmware);
+
+	return rc;
+}
+
+
 
 static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
@@ -11116,6 +11321,13 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	if (rc)
 		goto init_one_exit;
 
+	/* Set init arrays */
+	rc = bnx2x_init_firmware(bp, &pdev->dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Error loading firmware\n");
+		goto init_one_exit;
+	}
+
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11163,6 +11375,11 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
+	kfree(bp->init_ops_offsets);
+	kfree(bp->init_ops);
+	kfree(bp->init_data);
+	release_firmware(bp->firmware);
+
 	if (bp->regview)
 		iounmap(bp->regview);
 
@@ -11412,13 +11629,20 @@ static struct pci_driver bnx2x_pci_driver = {
 
 static int __init bnx2x_init(void)
 {
+	int ret;
+
 	bnx2x_wq = create_singlethread_workqueue("bnx2x");
 	if (bnx2x_wq == NULL) {
 		printk(KERN_ERR PFX "Cannot create workqueue\n");
 		return -ENOMEM;
 	}
 
-	return pci_register_driver(&bnx2x_pci_driver);
+	ret = pci_register_driver(&bnx2x_pci_driver);
+	if (ret) {
+		printk(KERN_ERR PFX "Cannot register driver\n");
+		destroy_workqueue(bnx2x_wq);
+	}
+	return ret;
 }
 
 static void __exit bnx2x_cleanup(void)
@@ -11431,3 +11655,4 @@ static void __exit bnx2x_cleanup(void)
 module_init(bnx2x_init);
 module_exit(bnx2x_cleanup);
 
+
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index faf094abef7..d4b570886c6 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1850,9 +1850,10 @@ static u16 aggregator_identifier;
  * Can be called only after the mac address of the bond is set.
  */
 void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast)
-{                         
+{
 	// check that the bond is not initialized yet
-	if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr), &(bond->dev->dev_addr))) {
+	if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
+				bond->dev->dev_addr)) {
 
 		aggregator_identifier = 0;
 
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index a306230381c..2c46a154f2c 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -26,10 +26,10 @@
 #include <asm/byteorder.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
+#include <linux/if_ether.h>
 
 // General definitions
-#define BOND_ETH_P_LACPDU       0x8809
-#define PKT_TYPE_LACPDU         cpu_to_be16(BOND_ETH_P_LACPDU)
+#define PKT_TYPE_LACPDU         cpu_to_be16(ETH_P_SLOW)
 #define AD_TIMER_INTERVAL       100 /*msec*/
 
 #define MULTICAST_LACPDU_ADDR    {0x01, 0x80, 0xC2, 0x00, 0x00, 0x02}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 74824028f85..d927f71af8a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -51,10 +51,10 @@
 #include <linux/ctype.h>
 #include <linux/inet.h>
 #include <linux/bitops.h>
+#include <linux/io.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
 #include <linux/inetdevice.h>
@@ -89,19 +89,19 @@ static int max_bonds	= BOND_DEFAULT_MAX_BONDS;
 static int num_grat_arp = 1;
 static int num_unsol_na = 1;
 static int miimon	= BOND_LINK_MON_INTERV;
-static int updelay	= 0;
-static int downdelay	= 0;
+static int updelay;
+static int downdelay;
 static int use_carrier	= 1;
-static char *mode	= NULL;
-static char *primary	= NULL;
-static char *lacp_rate	= NULL;
-static char *ad_select  = NULL;
-static char *xmit_hash_policy = NULL;
+static char *mode;
+static char *primary;
+static char *lacp_rate;
+static char *ad_select;
+static char *xmit_hash_policy;
 static int arp_interval = BOND_LINK_ARP_INTERV;
-static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
-static char *arp_validate = NULL;
-static char *fail_over_mac = NULL;
-struct bond_params bonding_defaults;
+static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
+static char *arp_validate;
+static char *fail_over_mac;
+static struct bond_params bonding_defaults;
 
 module_param(max_bonds, int, 0);
 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
@@ -151,14 +151,14 @@ static const char * const version =
 LIST_HEAD(bond_dev_list);
 
 #ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *bond_proc_dir = NULL;
+static struct proc_dir_entry *bond_proc_dir;
 #endif
 
-static __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ;
-static int arp_ip_count	= 0;
+static __be32 arp_target[BOND_MAX_ARP_TARGETS];
+static int arp_ip_count;
 static int bond_mode	= BOND_MODE_ROUNDROBIN;
-static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2;
-static int lacp_fast	= 0;
+static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
+static int lacp_fast;
 
 
 const struct bond_parm_tbl bond_lacp_tbl[] = {
@@ -210,6 +210,7 @@ struct bond_parm_tbl ad_select_tbl[] = {
 /*-------------------------- Forward declarations ---------------------------*/
 
 static void bond_send_gratuitous_arp(struct bonding *bond);
+static int bond_init(struct net_device *bond_dev);
 static void bond_deinit(struct net_device *bond_dev);
 
 /*---------------------------- General routines -----------------------------*/
@@ -221,7 +222,7 @@ static const char *bond_mode_name(int mode)
 		[BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
 		[BOND_MODE_XOR] = "load balancing (xor)",
 		[BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
-		[BOND_MODE_8023AD]= "IEEE 802.3ad Dynamic link aggregation",
+		[BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
 		[BOND_MODE_TLB] = "transmit load balancing",
 		[BOND_MODE_ALB] = "adaptive load balancing",
 	};
@@ -246,12 +247,11 @@ static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
 	struct vlan_entry *vlan;
 
 	pr_debug("bond: %s, vlan id %d\n",
-		(bond ? bond->dev->name: "None"), vlan_id);
+		(bond ? bond->dev->name : "None"), vlan_id);
 
 	vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
-	if (!vlan) {
+	if (!vlan)
 		return -ENOMEM;
-	}
 
 	INIT_LIST_HEAD(&vlan->vlan_list);
 	vlan->vlan_id = vlan_id;
@@ -351,16 +351,15 @@ static int bond_has_challenged_slaves(struct bonding *bond)
  *
  * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
  * or @curr->next otherwise (even if it is @curr itself again).
- * 
+ *
  * Caller must hold bond->lock
  */
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
 {
 	struct vlan_entry *next, *last;
 
-	if (list_empty(&bond->vlan_list)) {
+	if (list_empty(&bond->vlan_list))
 		return NULL;
-	}
 
 	if (!curr) {
 		next = list_entry(bond->vlan_list.next,
@@ -382,11 +381,11 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
 
 /**
  * bond_dev_queue_xmit - Prepare skb for xmit.
- * 
+ *
  * @bond: bond device that got this skb for tx.
  * @skb: hw accel VLAN tagged skb to transmit
  * @slave_dev: slave that is supposed to xmit this skbuff
- * 
+ *
  * When the bond gets an skb to transmit that is
  * already hardware accelerated VLAN tagged, and it
  * needs to relay this skb to a slave that is not
@@ -394,7 +393,8 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
  * i.e. strip the hwaccel tag and re-insert it as part
  * of the payload.
  */
-int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev)
+int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
+			struct net_device *slave_dev)
 {
 	unsigned short uninitialized_var(vlan_id);
 
@@ -428,7 +428,7 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_de
  * b. The operation is protected by the RTNL semaphore in the 8021q code,
  * c. Holding a lock with BH disabled while directly calling a base driver
  *    entry point is generally a BAD idea.
- * 
+ *
  * The design of synchronization/protection for this operation in the 8021q
  * module is good for one or more VLAN devices over a single physical device
  * and cannot be extended for a teaming solution like bonding, so there is a
@@ -443,7 +443,8 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_de
  * @bond_dev: bonding net device that got called
  * @grp: vlan group being registered
  */
-static void bond_vlan_rx_register(struct net_device *bond_dev, struct vlan_group *grp)
+static void bond_vlan_rx_register(struct net_device *bond_dev,
+				  struct vlan_group *grp)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave;
@@ -485,7 +486,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
 
 	res = bond_add_vlan(bond, vid);
 	if (res) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: Failed to add vlan id %d\n",
 		       bond_dev->name, vid);
 	}
@@ -520,7 +521,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
 
 	res = bond_del_vlan(bond, vid);
 	if (res) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: Failed to remove vlan id %d\n",
 		       bond_dev->name, vid);
 	}
@@ -551,7 +552,8 @@ out:
 	write_unlock_bh(&bond->lock);
 }
 
-static void bond_del_vlans_from_slave(struct bonding *bond, struct net_device *slave_dev)
+static void bond_del_vlans_from_slave(struct bonding *bond,
+				      struct net_device *slave_dev)
 {
 	const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
 	struct vlan_entry *vlan;
@@ -673,7 +675,7 @@ static int bond_update_speed_duplex(struct slave *slave)
  * if <dev> supports MII link status reporting, check its link status.
  *
  * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
- * depening upon the setting of the use_carrier parameter.
+ * depending upon the setting of the use_carrier parameter.
  *
  * Return either BMSR_LSTATUS, meaning that the link is up (or we
  * can't tell and just pretend it is), or 0, meaning that the link is
@@ -685,16 +687,29 @@ static int bond_update_speed_duplex(struct slave *slave)
  * It'd be nice if there was a good way to tell if a driver supports
  * netif_carrier, but there really isn't.
  */
-static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_dev, int reporting)
+static int bond_check_dev_link(struct bonding *bond,
+			       struct net_device *slave_dev, int reporting)
 {
 	const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
-	static int (* ioctl)(struct net_device *, struct ifreq *, int);
+	static int (*ioctl)(struct net_device *, struct ifreq *, int);
 	struct ifreq ifr;
 	struct mii_ioctl_data *mii;
 
 	if (bond->params.use_carrier)
 		return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
 
+	/* Try to get link status using Ethtool first. */
+	if (slave_dev->ethtool_ops) {
+		if (slave_dev->ethtool_ops->get_link) {
+			u32 link;
+
+			link = slave_dev->ethtool_ops->get_link(slave_dev);
+
+			return link ? BMSR_LSTATUS : 0;
+		}
+	}
+
+	/* Ethtool can't be used, fallback to MII ioctls. */
 	ioctl = slave_ops->ndo_do_ioctl;
 	if (ioctl) {
 		/* TODO: set pointer to correct ioctl on a per team member */
@@ -714,23 +729,8 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 		mii = if_mii(&ifr);
 		if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
 			mii->reg_num = MII_BMSR;
-			if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0) {
-				return (mii->val_out & BMSR_LSTATUS);
-			}
-		}
-	}
-
-	/*
-	 * Some drivers cache ETHTOOL_GLINK for a period of time so we only
-	 * attempt to get link status from it if the above MII ioctls fail.
-	 */
-	if (slave_dev->ethtool_ops) {
-		if (slave_dev->ethtool_ops->get_link) {
-			u32 link;
-
-			link = slave_dev->ethtool_ops->get_link(slave_dev);
-
-			return link ? BMSR_LSTATUS : 0;
+			if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
+				return mii->val_out & BMSR_LSTATUS;
 		}
 	}
 
@@ -740,7 +740,7 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 	 * cannot report link status).  If not reporting, pretend
 	 * we're ok.
 	 */
-	return (reporting ? -1 : BMSR_LSTATUS);
+	return reporting ? -1 : BMSR_LSTATUS;
 }
 
 /*----------------------------- Multicast list ------------------------------*/
@@ -748,7 +748,8 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 /*
  * Returns 0 if dmi1 and dmi2 are the same, non-0 otherwise
  */
-static inline int bond_is_dmi_same(struct dev_mc_list *dmi1, struct dev_mc_list *dmi2)
+static inline int bond_is_dmi_same(const struct dev_mc_list *dmi1,
+				   const struct dev_mc_list *dmi2)
 {
 	return memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0 &&
 			dmi1->dmi_addrlen == dmi2->dmi_addrlen;
@@ -757,14 +758,14 @@ static inline int bond_is_dmi_same(struct dev_mc_list *dmi1, struct dev_mc_list
 /*
  * returns dmi entry if found, NULL otherwise
  */
-static struct dev_mc_list *bond_mc_list_find_dmi(struct dev_mc_list *dmi, struct dev_mc_list *mc_list)
+static struct dev_mc_list *bond_mc_list_find_dmi(struct dev_mc_list *dmi,
+						 struct dev_mc_list *mc_list)
 {
 	struct dev_mc_list *idmi;
 
 	for (idmi = mc_list; idmi; idmi = idmi->next) {
-		if (bond_is_dmi_same(dmi, idmi)) {
+		if (bond_is_dmi_same(dmi, idmi))
 			return idmi;
-		}
 	}
 
 	return NULL;
@@ -826,15 +827,14 @@ static void bond_mc_add(struct bonding *bond, void *addr, int alen)
 {
 	if (USES_PRIMARY(bond->params.mode)) {
 		/* write lock already acquired */
-		if (bond->curr_active_slave) {
+		if (bond->curr_active_slave)
 			dev_mc_add(bond->curr_active_slave->dev, addr, alen, 0);
-		}
 	} else {
 		struct slave *slave;
 		int i;
-		bond_for_each_slave(bond, slave, i) {
+
+		bond_for_each_slave(bond, slave, i)
 			dev_mc_add(slave->dev, addr, alen, 0);
-		}
 	}
 }
 
@@ -846,9 +846,9 @@ static void bond_mc_delete(struct bonding *bond, void *addr, int alen)
 {
 	if (USES_PRIMARY(bond->params.mode)) {
 		/* write lock already acquired */
-		if (bond->curr_active_slave) {
-			dev_mc_delete(bond->curr_active_slave->dev, addr, alen, 0);
-		}
+		if (bond->curr_active_slave)
+			dev_mc_delete(bond->curr_active_slave->dev, addr,
+				      alen, 0);
 	} else {
 		struct slave *slave;
 		int i;
@@ -872,9 +872,8 @@ static void bond_resend_igmp_join_requests(struct bonding *bond)
 	rcu_read_lock();
 	in_dev = __in_dev_get_rcu(bond->dev);
 	if (in_dev) {
-		for (im = in_dev->mc_list; im; im = im->next) {
+		for (im = in_dev->mc_list; im; im = im->next)
 			ip_mc_rejoin_group(im);
-		}
 	}
 
 	rcu_read_unlock();
@@ -893,7 +892,8 @@ static void bond_mc_list_destroy(struct bonding *bond)
 		kfree(dmi);
 		dmi = bond->mc_list;
 	}
-        bond->mc_list = NULL;
+
+	bond->mc_list = NULL;
 }
 
 /*
@@ -926,14 +926,14 @@ static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond,
 /*
  * flush all members of flush->mc_list from device dev->mc_list
  */
-static void bond_mc_list_flush(struct net_device *bond_dev, struct net_device *slave_dev)
+static void bond_mc_list_flush(struct net_device *bond_dev,
+			       struct net_device *slave_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct dev_mc_list *dmi;
 
-	for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
+	for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next)
 		dev_mc_delete(slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		/* del lacpdu mc addr from mc list */
@@ -950,44 +950,40 @@ static void bond_mc_list_flush(struct net_device *bond_dev, struct net_device *s
  * old active slaves (if any) according to the multicast mode, and
  * promiscuous flags unconditionally.
  */
-static void bond_mc_swap(struct bonding *bond, struct slave *new_active, struct slave *old_active)
+static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
+			 struct slave *old_active)
 {
 	struct dev_mc_list *dmi;
 
-	if (!USES_PRIMARY(bond->params.mode)) {
+	if (!USES_PRIMARY(bond->params.mode))
 		/* nothing to do -  mc list is already up-to-date on
 		 * all slaves
 		 */
 		return;
-	}
 
 	if (old_active) {
-		if (bond->dev->flags & IFF_PROMISC) {
+		if (bond->dev->flags & IFF_PROMISC)
 			dev_set_promiscuity(old_active->dev, -1);
-		}
 
-		if (bond->dev->flags & IFF_ALLMULTI) {
+		if (bond->dev->flags & IFF_ALLMULTI)
 			dev_set_allmulti(old_active->dev, -1);
-		}
 
-		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next) {
-			dev_mc_delete(old_active->dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-		}
+		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next)
+			dev_mc_delete(old_active->dev, dmi->dmi_addr,
+				      dmi->dmi_addrlen, 0);
 	}
 
 	if (new_active) {
 		/* FIXME: Signal errors upstream. */
-		if (bond->dev->flags & IFF_PROMISC) {
+		if (bond->dev->flags & IFF_PROMISC)
 			dev_set_promiscuity(new_active->dev, 1);
-		}
 
-		if (bond->dev->flags & IFF_ALLMULTI) {
+		if (bond->dev->flags & IFF_ALLMULTI)
 			dev_set_allmulti(new_active->dev, 1);
-		}
 
-		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next) {
-			dev_mc_add(new_active->dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-		}
+		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next)
+			dev_mc_add(new_active->dev, dmi->dmi_addr,
+				   dmi->dmi_addrlen, 0);
 		bond_resend_igmp_join_requests(bond);
 	}
 }
@@ -1041,7 +1037,7 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 
 		rv = dev_set_mac_address(new_active->dev, &saddr);
 		if (rv) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error %d setting MAC of slave %s\n",
 			       bond->dev->name, -rv, new_active->dev->name);
 			goto out;
@@ -1055,7 +1051,7 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 
 		rv = dev_set_mac_address(old_active->dev, &saddr);
 		if (rv)
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error %d setting MAC of slave %s\n",
 			       bond->dev->name, -rv, new_active->dev->name);
 out:
@@ -1063,7 +1059,7 @@ out:
 		write_lock_bh(&bond->curr_slave_lock);
 		break;
 	default:
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: bond_do_fail_over_mac impossible: bad policy %d\n",
 		       bond->dev->name, bond->params.fail_over_mac);
 		break;
@@ -1088,17 +1084,17 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 	new_active = old_active = bond->curr_active_slave;
 
 	if (!new_active) { /* there were no active slaves left */
-		if (bond->slave_cnt > 0) {  /* found one slave */
+		if (bond->slave_cnt > 0)   /* found one slave */
 			new_active = bond->first_slave;
-		} else {
+		else
 			return NULL; /* still no slave, return NULL */
-		}
 	}
 
-	/* first try the primary link; if arping, a link must tx/rx traffic
-	 * before it can be considered the curr_active_slave - also, we would skip
-	 * slaves between the curr_active_slave and primary_slave that may be up
-	 * and able to arp
+	/*
+	 * first try the primary link; if arping, a link must tx/rx
+	 * traffic before it can be considered the curr_active_slave.
+	 * also, we would skip slaves between the curr_active_slave
+	 * and primary_slave that may be up and able to arp
 	 */
 	if ((bond->primary_slave) &&
 	    (!bond->params.arp_interval) &&
@@ -1146,16 +1142,15 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 {
 	struct slave *old_active = bond->curr_active_slave;
 
-	if (old_active == new_active) {
+	if (old_active == new_active)
 		return;
-	}
 
 	if (new_active) {
 		new_active->jiffies = jiffies;
 
 		if (new_active->link == BOND_LINK_BACK) {
 			if (USES_PRIMARY(bond->params.mode)) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: making interface %s the new "
 				       "active one %d ms earlier.\n",
 				       bond->dev->name, new_active->dev->name,
@@ -1165,15 +1160,14 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 			new_active->delay = 0;
 			new_active->link = BOND_LINK_UP;
 
-			if (bond->params.mode == BOND_MODE_8023AD) {
+			if (bond->params.mode == BOND_MODE_8023AD)
 				bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
-			}
 
 			if (bond_is_lb(bond))
 				bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
 		} else {
 			if (USES_PRIMARY(bond->params.mode)) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: making interface %s the new "
 				       "active one.\n",
 				       bond->dev->name, new_active->dev->name);
@@ -1181,9 +1175,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 		}
 	}
 
-	if (USES_PRIMARY(bond->params.mode)) {
+	if (USES_PRIMARY(bond->params.mode))
 		bond_mc_swap(bond, new_active, old_active);
-	}
 
 	if (bond_is_lb(bond)) {
 		bond_alb_handle_active_change(bond, new_active);
@@ -1196,9 +1189,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 	}
 
 	if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
-		if (old_active) {
+		if (old_active)
 			bond_set_slave_inactive_flags(old_active);
-		}
 
 		if (new_active) {
 			bond_set_slave_active_flags(new_active);
@@ -1228,7 +1220,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
  * bond_select_active_slave - select a new active slave, if needed
  * @bond: our bonding struct
  *
- * This functions shoud be called when one of the following occurs:
+ * This functions should be called when one of the following occurs:
  * - The old curr_active_slave has been released or lost its link.
  * - The primary_slave has got its link back.
  * - A slave has got its link back and there's no old curr_active_slave.
@@ -1248,11 +1240,11 @@ void bond_select_active_slave(struct bonding *bond)
 			return;
 
 		if (netif_carrier_ok(bond->dev)) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: first active interface up!\n",
 			       bond->dev->name);
 		} else {
-			printk(KERN_INFO DRV_NAME ": %s: "
+			pr_info(DRV_NAME ": %s: "
 			       "now running without any active interface !\n",
 			       bond->dev->name);
 		}
@@ -1294,13 +1286,11 @@ static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
  */
 static void bond_detach_slave(struct bonding *bond, struct slave *slave)
 {
-	if (slave->next) {
+	if (slave->next)
 		slave->next->prev = slave->prev;
-	}
 
-	if (slave->prev) {
+	if (slave->prev)
 		slave->prev->next = slave->next;
-	}
 
 	if (bond->first_slave == slave) { /* slave is the first slave */
 		if (bond->slave_cnt > 1) { /* there are more slave */
@@ -1331,7 +1321,7 @@ static int bond_sethwaddr(struct net_device *bond_dev,
 	(NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
 	 NETIF_F_HW_VLAN_FILTER)
 
-/* 
+/*
  * Compute the common dev->feature set available to all slaves.  Some
  * feature bits are managed elsewhere, so preserve those feature bits
  * on the master device.
@@ -1399,14 +1389,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
 		slave_ops->ndo_do_ioctl == NULL) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": %s: Warning: no link monitoring support for %s\n",
 		       bond_dev->name, slave_dev->name);
 	}
 
 	/* bond must be initialized by bond_open() before enslaving */
 	if (!(bond_dev->flags & IFF_UP)) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 			" %s: master_dev is not up in bond_enslave\n",
 			bond_dev->name);
 	}
@@ -1422,14 +1412,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
 		pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
 		if (!list_empty(&bond->vlan_list)) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error: cannot enslave VLAN "
 			       "challenged slave %s on VLAN enabled "
 			       "bond %s\n", bond_dev->name, slave_dev->name,
 			       bond_dev->name);
 			return -EPERM;
 		} else {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: enslaved VLAN challenged "
 			       "slave %s. Adding VLANs will be blocked as "
 			       "long as %s is part of bond %s\n",
@@ -1449,12 +1439,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	/*
 	 * Old ifenslave binaries are no longer supported.  These can
-	 * be identified with moderate accurary by the state of the slave:
+	 * be identified with moderate accuracy by the state of the slave:
 	 * the current ifenslave will set the interface down prior to
 	 * enslaving it; the old ifenslave will not.
 	 */
 	if ((slave_dev->flags & IFF_UP)) {
-		printk(KERN_ERR DRV_NAME ": %s is up. "
+		pr_err(DRV_NAME ": %s is up. "
 		       "This may be due to an out of date ifenslave.\n",
 		       slave_dev->name);
 		res = -EPERM;
@@ -1472,7 +1462,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		if (slave_dev->type != ARPHRD_ETHER)
 			bond_setup_by_slave(bond_dev, slave_dev);
 	} else if (bond_dev->type != slave_dev->type) {
-		printk(KERN_ERR DRV_NAME ": %s ether type (%d) is different "
+		pr_err(DRV_NAME ": %s ether type (%d) is different "
 			"from other slaves (%d), can not enslave it.\n",
 			slave_dev->name,
 			slave_dev->type, bond_dev->type);
@@ -1482,14 +1472,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (slave_ops->ndo_set_mac_address == NULL) {
 		if (bond->slave_cnt == 0) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: The first slave device "
 			       "specified does not support setting the MAC "
 			       "address. Setting fail_over_mac to active.",
 			       bond_dev->name);
 			bond->params.fail_over_mac = BOND_FOM_ACTIVE;
 		} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 				": %s: Error: The slave device specified "
 				"does not support setting the MAC address, "
 				"but fail_over_mac is not set to active.\n"
@@ -1539,7 +1529,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	/* open the slave since the application closed it */
 	res = dev_open(slave_dev);
 	if (res) {
-		pr_debug("Openning slave %s failed\n", slave_dev->name);
+		pr_debug("Opening slave %s failed\n", slave_dev->name);
 		goto err_unset_master;
 	}
 
@@ -1551,9 +1541,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		 * it might fail and we do not want to have to undo everything
 		 */
 		res = bond_alb_init_slave(bond, new_slave);
-		if (res) {
+		if (res)
 			goto err_close;
-		}
 	}
 
 	/* If the mode USES_PRIMARY, then the new slave gets the
@@ -1578,9 +1567,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 		netif_addr_lock_bh(bond_dev);
 		/* upload master's mc_list to new slave */
-		for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
-			dev_mc_add (slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-		}
+		for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next)
+			dev_mc_add(slave_dev, dmi->dmi_addr,
+				   dmi->dmi_addrlen, 0);
 		netif_addr_unlock_bh(bond_dev);
 	}
 
@@ -1621,7 +1610,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			 * supported); thus, we don't need to change
 			 * the messages for netif_carrier.
 			 */
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: MII and ETHTOOL support not "
 			       "available for interface %s, and "
 			       "arp_interval/arp_ip_target module parameters "
@@ -1630,7 +1619,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			       bond_dev->name, slave_dev->name);
 		} else if (link_reporting == -1) {
 			/* unable get link status using mii/ethtool */
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: can't get link status from "
 			       "interface %s; the network driver associated "
 			       "with this interface does not support MII or "
@@ -1662,13 +1651,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (bond_update_speed_duplex(new_slave) &&
 	    (new_slave->link != BOND_LINK_DOWN)) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": %s: Warning: failed to get speed and duplex from %s, "
 		       "assumed to be 100Mb/sec and Full.\n",
 		       bond_dev->name, new_slave->dev->name);
 
 		if (bond->params.mode == BOND_MODE_8023AD) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
 			       "support in base driver for proper aggregator "
 			       "selection.\n", bond_dev->name);
@@ -1677,9 +1666,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
 		/* if there is a primary slave, remember it */
-		if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
+		if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
 			bond->primary_slave = new_slave;
-		}
 	}
 
 	write_lock_bh(&bond->curr_slave_lock);
@@ -1726,9 +1714,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		 * anyway (it holds no special properties of the bond device),
 		 * so we can change it without calling change_active_interface()
 		 */
-		if (!bond->curr_active_slave) {
+		if (!bond->curr_active_slave)
 			bond->curr_active_slave = new_slave;
-		}
+
 		break;
 	} /* switch(bond_mode) */
 
@@ -1742,7 +1730,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	if (res)
 		goto err_close;
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: enslaving %s as a%s interface with a%s link.\n",
 	       bond_dev->name, slave_dev->name,
 	       new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
@@ -1774,7 +1762,7 @@ err_free:
 
 err_undo_flags:
 	bond_dev->features = old_features;
- 
+
 	return res;
 }
 
@@ -1799,7 +1787,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	/* slave is not a slave or master is not master of this slave */
 	if (!(slave_dev->flags & IFF_SLAVE) ||
 	    (slave_dev->master != bond_dev)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: cannot release %s.\n",
 		       bond_dev->name, slave_dev->name);
 		return -EINVAL;
@@ -1810,7 +1798,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	slave = bond_get_slave_by_dev(bond, slave_dev);
 	if (!slave) {
 		/* not a slave of this bond */
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: %s not enslaved\n",
 		       bond_dev->name, slave_dev->name);
 		write_unlock_bh(&bond->lock);
@@ -1821,7 +1809,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		mac_addr_differ = memcmp(bond_dev->dev_addr, slave->perm_hwaddr,
 					 ETH_ALEN);
 		if (!mac_addr_differ && (bond->slave_cnt > 1))
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: the permanent HWaddr of %s - "
 			       "%pM - is still in use by %s. "
 			       "Set the HWaddr of %s to a different address "
@@ -1839,7 +1827,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		bond_3ad_unbind_slave(slave);
 	}
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: releasing %s interface %s\n",
 	       bond_dev->name,
 	       (slave->state == BOND_STATE_ACTIVE)
@@ -1855,13 +1843,11 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	bond_compute_features(bond);
 
-	if (bond->primary_slave == slave) {
+	if (bond->primary_slave == slave)
 		bond->primary_slave = NULL;
-	}
 
-	if (oldcurrent == slave) {
+	if (oldcurrent == slave)
 		bond_change_active_slave(bond, NULL);
-	}
 
 	if (bond_is_lb(bond)) {
 		/* Must be called only after the slave has been
@@ -1903,18 +1889,18 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		if (list_empty(&bond->vlan_list)) {
 			bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
 		} else {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: clearing HW address of %s while it "
 			       "still has VLANs.\n",
 			       bond_dev->name, bond_dev->name);
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: When re-adding slaves, make sure the bond's "
 			       "HW address matches its VLANs'.\n",
 			       bond_dev->name);
 		}
 	} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
 		   !bond_has_challenged_slaves(bond)) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: last VLAN challenged slave %s "
 		       "left bond %s. VLAN blocking is removed\n",
 		       bond_dev->name, slave_dev->name, bond_dev->name);
@@ -1934,14 +1920,12 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	 */
 	if (!USES_PRIMARY(bond->params.mode)) {
 		/* unset promiscuity level from slave */
-		if (bond_dev->flags & IFF_PROMISC) {
+		if (bond_dev->flags & IFF_PROMISC)
 			dev_set_promiscuity(slave_dev, -1);
-		}
 
 		/* unset allmulti level from slave */
-		if (bond_dev->flags & IFF_ALLMULTI) {
+		if (bond_dev->flags & IFF_ALLMULTI)
 			dev_set_allmulti(slave_dev, -1);
-		}
 
 		/* flush master's mc_list from slave */
 		netif_addr_lock_bh(bond_dev);
@@ -1974,41 +1958,36 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 * Destroy a bonding device.
 * Must be under rtnl_lock when this function is called.
 */
-void bond_destroy(struct bonding *bond)
-{
-	bond_deinit(bond->dev);
-	bond_destroy_sysfs_entry(bond);
-	unregister_netdevice(bond->dev);
-}
-
-static void bond_destructor(struct net_device *bond_dev)
+static void bond_uninit(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
+	bond_deinit(bond_dev);
+	bond_destroy_sysfs_entry(bond);
+
 	if (bond->wq)
 		destroy_workqueue(bond->wq);
 
 	netif_addr_lock_bh(bond_dev);
 	bond_mc_list_destroy(bond);
 	netif_addr_unlock_bh(bond_dev);
-
-	free_netdev(bond_dev);
 }
 
 /*
-* First release a slave and than destroy the bond if no more slaves iare left.
+* First release a slave and than destroy the bond if no more slaves are left.
 * Must be under rtnl_lock when this function is called.
 */
-int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev)
+int  bond_release_and_destroy(struct net_device *bond_dev,
+			      struct net_device *slave_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	int ret;
 
 	ret = bond_release(bond_dev, slave_dev);
 	if ((ret == 0) && (bond->slave_cnt == 0)) {
-		printk(KERN_INFO DRV_NAME ": %s: destroying bond %s.\n",
+		pr_info(DRV_NAME ": %s: destroying bond %s.\n",
 		       bond_dev->name, bond_dev->name);
-		bond_destroy(bond);
+		unregister_netdevice(bond_dev);
 	}
 	return ret;
 }
@@ -2027,9 +2006,8 @@ static int bond_release_all(struct net_device *bond_dev)
 
 	netif_carrier_off(bond_dev);
 
-	if (bond->slave_cnt == 0) {
+	if (bond->slave_cnt == 0)
 		goto out;
-	}
 
 	bond->current_arp_slave = NULL;
 	bond->primary_slave = NULL;
@@ -2039,9 +2017,8 @@ static int bond_release_all(struct net_device *bond_dev)
 		/* Inform AD package of unbinding of slave
 		 * before slave is detached from the list.
 		 */
-		if (bond->params.mode == BOND_MODE_8023AD) {
+		if (bond->params.mode == BOND_MODE_8023AD)
 			bond_3ad_unbind_slave(slave);
-		}
 
 		slave_dev = slave->dev;
 		bond_detach_slave(bond, slave);
@@ -2070,14 +2047,12 @@ static int bond_release_all(struct net_device *bond_dev)
 		 */
 		if (!USES_PRIMARY(bond->params.mode)) {
 			/* unset promiscuity level from slave */
-			if (bond_dev->flags & IFF_PROMISC) {
+			if (bond_dev->flags & IFF_PROMISC)
 				dev_set_promiscuity(slave_dev, -1);
-			}
 
 			/* unset allmulti level from slave */
-			if (bond_dev->flags & IFF_ALLMULTI) {
+			if (bond_dev->flags & IFF_ALLMULTI)
 				dev_set_allmulti(slave_dev, -1);
-			}
 
 			/* flush master's mc_list from slave */
 			netif_addr_lock_bh(bond_dev);
@@ -2112,20 +2087,20 @@ static int bond_release_all(struct net_device *bond_dev)
 	 */
 	memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
 
-	if (list_empty(&bond->vlan_list)) {
+	if (list_empty(&bond->vlan_list))
 		bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
-	} else {
-		printk(KERN_WARNING DRV_NAME
+	else {
+		pr_warning(DRV_NAME
 		       ": %s: Warning: clearing HW address of %s while it "
 		       "still has VLANs.\n",
 		       bond_dev->name, bond_dev->name);
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": %s: When re-adding slaves, make sure the bond's "
 		       "HW address matches its VLANs'.\n",
 		       bond_dev->name);
 	}
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: released all slaves\n",
 	       bond_dev->name);
 
@@ -2143,8 +2118,8 @@ out:
  *  - <slave_dev> is already active.
  *  - The link state of <slave_dev> is not BOND_LINK_UP.
  *  - <slave_dev> is not running.
- * In these cases, this fuction does nothing.
- * In the other cases, currnt_slave pointer is changed and 0 is returned.
+ * In these cases, this function does nothing.
+ * In the other cases, current_slave pointer is changed and 0 is returned.
  */
 static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
 {
@@ -2153,15 +2128,12 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi
 	struct slave *new_active = NULL;
 	int res = 0;
 
-	if (!USES_PRIMARY(bond->params.mode)) {
+	if (!USES_PRIMARY(bond->params.mode))
 		return -EINVAL;
-	}
 
 	/* Verify that master_dev is indeed the master of slave_dev */
-	if (!(slave_dev->flags & IFF_SLAVE) ||
-	    (slave_dev->master != bond_dev)) {
+	if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev))
 		return -EINVAL;
-	}
 
 	read_lock(&bond->lock);
 
@@ -2186,9 +2158,8 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi
 		write_lock_bh(&bond->curr_slave_lock);
 		bond_change_active_slave(bond, new_active);
 		write_unlock_bh(&bond->curr_slave_lock);
-	} else {
+	} else
 		res = -EINVAL;
-	}
 
 	read_unlock(&bond->lock);
 
@@ -2240,6 +2211,9 @@ static int bond_miimon_inspect(struct bonding *bond)
 {
 	struct slave *slave;
 	int i, link_state, commit = 0;
+	bool ignore_updelay;
+
+	ignore_updelay = !bond->curr_active_slave ? true : false;
 
 	bond_for_each_slave(bond, slave, i) {
 		slave->new_link = BOND_LINK_NOCHANGE;
@@ -2254,7 +2228,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 			slave->link = BOND_LINK_FAIL;
 			slave->delay = bond->params.downdelay;
 			if (slave->delay) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status down for %s"
 				       "interface %s, disabling it in %d ms.\n",
 				       bond->dev->name,
@@ -2273,7 +2247,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 				 */
 				slave->link = BOND_LINK_UP;
 				slave->jiffies = jiffies;
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status up again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
@@ -2300,10 +2274,11 @@ static int bond_miimon_inspect(struct bonding *bond)
 			slave->delay = bond->params.updelay;
 
 			if (slave->delay) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status up for "
 				       "interface %s, enabling it in %d ms.\n",
 				       bond->dev->name, slave->dev->name,
+				       ignore_updelay ? 0 :
 				       bond->params.updelay *
 				       bond->params.miimon);
 			}
@@ -2311,7 +2286,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 		case BOND_LINK_BACK:
 			if (!link_state) {
 				slave->link = BOND_LINK_DOWN;
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status down again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
@@ -2322,9 +2297,13 @@ static int bond_miimon_inspect(struct bonding *bond)
 				continue;
 			}
 
+			if (ignore_updelay)
+				slave->delay = 0;
+
 			if (slave->delay <= 0) {
 				slave->new_link = BOND_LINK_UP;
 				commit++;
+				ignore_updelay = false;
 				continue;
 			}
 
@@ -2361,7 +2340,7 @@ static void bond_miimon_commit(struct bonding *bond)
 				slave->state = BOND_STATE_BACKUP;
 			}
 
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: link status definitely "
 			       "up for interface %s.\n",
 			       bond->dev->name, slave->dev->name);
@@ -2390,7 +2369,7 @@ static void bond_miimon_commit(struct bonding *bond)
 			    bond->params.mode == BOND_MODE_8023AD)
 				bond_set_slave_inactive_flags(slave);
 
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: link status definitely down for "
 			       "interface %s, disabling it\n",
 			       bond->dev->name, slave->dev->name);
@@ -2399,8 +2378,7 @@ static void bond_miimon_commit(struct bonding *bond)
 				bond_3ad_handle_link_change(slave,
 							    BOND_LINK_DOWN);
 
-			if (bond->params.mode == BOND_MODE_TLB ||
-			    bond->params.mode == BOND_MODE_ALB)
+			if (bond_is_lb(bond))
 				bond_alb_handle_link_change(bond, slave,
 							    BOND_LINK_DOWN);
 
@@ -2410,7 +2388,7 @@ static void bond_miimon_commit(struct bonding *bond)
 			continue;
 
 		default:
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: invalid new link %d on slave %s\n",
 			       bond->dev->name, slave->new_link,
 			       slave->dev->name);
@@ -2531,18 +2509,18 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
 
 	pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
 	       slave_dev->name, dest_ip, src_ip, vlan_id);
-	       
+
 	skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
 			 NULL, slave_dev->dev_addr, NULL);
 
 	if (!skb) {
-		printk(KERN_ERR DRV_NAME ": ARP packet allocation failed\n");
+		pr_err(DRV_NAME ": ARP packet allocation failed\n");
 		return;
 	}
 	if (vlan_id) {
 		skb = vlan_put_tag(skb, vlan_id);
 		if (!skb) {
-			printk(KERN_ERR DRV_NAME ": failed to insert VLAN tag\n");
+			pr_err(DRV_NAME ": failed to insert VLAN tag\n");
 			return;
 		}
 	}
@@ -2582,7 +2560,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		rv = ip_route_output_key(&init_net, &rt, &fl);
 		if (rv) {
 			if (net_ratelimit()) {
-				printk(KERN_WARNING DRV_NAME
+				pr_warning(DRV_NAME
 			     ": %s: no route to arp_ip_target %pI4\n",
 				       bond->dev->name, &fl.fl4_dst);
 			}
@@ -2619,7 +2597,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		}
 
 		if (net_ratelimit()) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 	       ": %s: no path to arp_ip_target %pI4 via rt.dev %s\n",
 			       bond->dev->name, &fl.fl4_dst,
 			       rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
@@ -2767,13 +2745,11 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 
 	delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
 
-	if (bond->kill_timers) {
+	if (bond->kill_timers)
 		goto out;
-	}
 
-	if (bond->slave_cnt == 0) {
+	if (bond->slave_cnt == 0)
 		goto re_arm;
-	}
 
 	read_lock(&bond->curr_slave_lock);
 	oldcurrent = bond->curr_active_slave;
@@ -2789,7 +2765,7 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 	 */
 	bond_for_each_slave(bond, slave, i) {
 		if (slave->link != BOND_LINK_UP) {
-			if (time_before_eq(jiffies, slave->dev->trans_start + delta_in_ticks) &&
+			if (time_before_eq(jiffies, dev_trans_start(slave->dev) + delta_in_ticks) &&
 			    time_before_eq(jiffies, slave->dev->last_rx + delta_in_ticks)) {
 
 				slave->link  = BOND_LINK_UP;
@@ -2801,14 +2777,14 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 				 * is closed.
 				 */
 				if (!oldcurrent) {
-					printk(KERN_INFO DRV_NAME
+					pr_info(DRV_NAME
 					       ": %s: link status definitely "
 					       "up for interface %s, ",
 					       bond->dev->name,
 					       slave->dev->name);
 					do_failover = 1;
 				} else {
-					printk(KERN_INFO DRV_NAME
+					pr_info(DRV_NAME
 					       ": %s: interface %s is now up\n",
 					       bond->dev->name,
 					       slave->dev->name);
@@ -2821,24 +2797,22 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 			 * when the source ip is 0, so don't take the link down
 			 * if we don't know our ip yet
 			 */
-			if (time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
+			if (time_after_eq(jiffies, dev_trans_start(slave->dev) + 2*delta_in_ticks) ||
 			    (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks))) {
 
 				slave->link  = BOND_LINK_DOWN;
 				slave->state = BOND_STATE_BACKUP;
 
-				if (slave->link_failure_count < UINT_MAX) {
+				if (slave->link_failure_count < UINT_MAX)
 					slave->link_failure_count++;
-				}
 
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: interface %s is now down.\n",
 				       bond->dev->name,
 				       slave->dev->name);
 
-				if (slave == oldcurrent) {
+				if (slave == oldcurrent)
 					do_failover = 1;
-				}
 			}
 		}
 
@@ -2849,9 +2823,8 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 		 * do - all replies will be rx'ed on same link causing slaves
 		 * to be unstable during low/no traffic periods
 		 */
-		if (IS_UP(slave->dev)) {
+		if (IS_UP(slave->dev))
 			bond_arp_send_all(bond, slave);
-		}
 	}
 
 	if (do_failover) {
@@ -2932,7 +2905,7 @@ static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
 		 *    the bond has an IP address)
 		 */
 		if ((slave->state == BOND_STATE_ACTIVE) &&
-		    (time_after_eq(jiffies, slave->dev->trans_start +
+		    (time_after_eq(jiffies, dev_trans_start(slave->dev) +
 				    2 * delta_in_ticks) ||
 		      (time_after_eq(jiffies, slave_last_rx(bond, slave)
 				     + 2 * delta_in_ticks)))) {
@@ -2976,13 +2949,13 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			write_lock_bh(&bond->curr_slave_lock);
 
 			if (!bond->curr_active_slave &&
-			    time_before_eq(jiffies, slave->dev->trans_start +
+			    time_before_eq(jiffies, dev_trans_start(slave->dev) +
 					   delta_in_ticks)) {
 				slave->link = BOND_LINK_UP;
 				bond_change_active_slave(bond, slave);
 				bond->current_arp_slave = NULL;
 
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: %s is up and now the "
 				       "active interface\n",
 				       bond->dev->name, slave->dev->name);
@@ -2998,7 +2971,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 				bond_set_slave_inactive_flags(slave);
 				bond->current_arp_slave = NULL;
 
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: backup interface %s is now up\n",
 				       bond->dev->name, slave->dev->name);
 			}
@@ -3014,7 +2987,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			slave->link = BOND_LINK_DOWN;
 
 			if (slave == bond->curr_active_slave) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status down for active "
 				       "interface %s, disabling it\n",
 				       bond->dev->name, slave->dev->name);
@@ -3033,7 +3006,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 				bond->current_arp_slave = NULL;
 
 			} else if (slave->state == BOND_STATE_BACKUP) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: backup interface %s is now down\n",
 				       bond->dev->name, slave->dev->name);
 
@@ -3042,7 +3015,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			break;
 
 		default:
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: impossible: new_link %d on slave %s\n",
 			       bond->dev->name, slave->new_link,
 			       slave->dev->name);
@@ -3076,7 +3049,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
 	read_lock(&bond->curr_slave_lock);
 
 	if (bond->current_arp_slave && bond->curr_active_slave)
-		printk("PROBE: c_arp %s && cas %s BAD\n",
+		pr_info(DRV_NAME "PROBE: c_arp %s && cas %s BAD\n",
 		       bond->current_arp_slave->dev->name,
 		       bond->curr_active_slave->dev->name);
 
@@ -3126,7 +3099,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
 
 			bond_set_slave_inactive_flags(slave);
 
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: backup interface %s is now down.\n",
 			       bond->dev->name, slave->dev->name);
 		}
@@ -3176,9 +3149,8 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 	bond_ab_arp_probe(bond);
 
 re_arm:
-	if (bond->params.arp_interval) {
+	if (bond->params.arp_interval)
 		queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
-	}
 out:
 	read_unlock(&bond->lock);
 }
@@ -3200,14 +3172,12 @@ static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
 	read_lock(&dev_base_lock);
 	read_lock(&bond->lock);
 
-	if (*pos == 0) {
+	if (*pos == 0)
 		return SEQ_START_TOKEN;
-	}
 
 	bond_for_each_slave(bond, slave, i) {
-		if (++off == *pos) {
+		if (++off == *pos)
 			return slave;
-		}
 	}
 
 	return NULL;
@@ -3219,9 +3189,8 @@ static void *bond_info_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	struct slave *slave = v;
 
 	++*pos;
-	if (v == SEQ_START_TOKEN) {
+	if (v == SEQ_START_TOKEN)
 		return bond->first_slave;
-	}
 
 	slave = slave->next;
 
@@ -3284,14 +3253,14 @@ static void bond_info_show_master(struct seq_file *seq)
 
 
 	/* ARP information */
-	if(bond->params.arp_interval > 0) {
-		int printed=0;
+	if (bond->params.arp_interval > 0) {
+		int printed = 0;
 		seq_printf(seq, "ARP Polling Interval (ms): %d\n",
 				bond->params.arp_interval);
 
 		seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
 
-		for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
+		for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
 			if (!bond->params.arp_targets[i])
 				break;
 			if (printed)
@@ -3331,7 +3300,8 @@ static void bond_info_show_master(struct seq_file *seq)
 	}
 }
 
-static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave)
+static void bond_info_show_slave(struct seq_file *seq,
+				 const struct slave *slave)
 {
 	struct bonding *bond = seq->private;
 
@@ -3347,12 +3317,11 @@ static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave
 		const struct aggregator *agg
 			= SLAVE_AD_INFO(slave).port.aggregator;
 
-		if (agg) {
+		if (agg)
 			seq_printf(seq, "Aggregator ID: %d\n",
 				   agg->aggregator_identifier);
-		} else {
+		else
 			seq_puts(seq, "Aggregator ID: N/A\n");
-		}
 	}
 }
 
@@ -3361,9 +3330,8 @@ static int bond_info_seq_show(struct seq_file *seq, void *v)
 	if (v == SEQ_START_TOKEN) {
 		seq_printf(seq, "%s\n", version);
 		bond_info_show_master(seq);
-	} else {
+	} else
 		bond_info_show_slave(seq, v);
-	}
 
 	return 0;
 }
@@ -3408,13 +3376,12 @@ static int bond_create_proc_entry(struct bonding *bond)
 		bond->proc_entry = proc_create_data(bond_dev->name,
 						    S_IRUGO, bond_proc_dir,
 						    &bond_info_fops, bond);
-		if (bond->proc_entry == NULL) {
-			printk(KERN_WARNING DRV_NAME
+		if (bond->proc_entry == NULL)
+			pr_warning(DRV_NAME
 			       ": Warning: Cannot create /proc/net/%s/%s\n",
 			       DRV_NAME, bond_dev->name);
-		} else {
+		else
 			memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
-		}
 	}
 
 	return 0;
@@ -3437,7 +3404,7 @@ static void bond_create_proc_dir(void)
 	if (!bond_proc_dir) {
 		bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
 		if (!bond_proc_dir)
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 				": Warning: cannot create /proc/net/%s\n",
 				DRV_NAME);
 	}
@@ -3453,8 +3420,28 @@ static void bond_destroy_proc_dir(void)
 		bond_proc_dir = NULL;
 	}
 }
+
+#else /* !CONFIG_PROC_FS */
+
+static int bond_create_proc_entry(struct bonding *bond)
+{
+}
+
+static void bond_remove_proc_entry(struct bonding *bond)
+{
+}
+
+static void bond_create_proc_dir(void)
+{
+}
+
+static void bond_destroy_proc_dir(void)
+{
+}
+
 #endif /* CONFIG_PROC_FS */
 
+
 /*-------------------------- netdev event handling --------------------------*/
 
 /*
@@ -3462,18 +3449,17 @@ static void bond_destroy_proc_dir(void)
  */
 static int bond_event_changename(struct bonding *bond)
 {
-#ifdef CONFIG_PROC_FS
 	bond_remove_proc_entry(bond);
 	bond_create_proc_entry(bond);
-#endif
-	down_write(&(bonding_rwsem));
-        bond_destroy_sysfs_entry(bond);
-        bond_create_sysfs_entry(bond);
-	up_write(&(bonding_rwsem));
+
+	bond_destroy_sysfs_entry(bond);
+	bond_create_sysfs_entry(bond);
+
 	return NOTIFY_DONE;
 }
 
-static int bond_master_netdev_event(unsigned long event, struct net_device *bond_dev)
+static int bond_master_netdev_event(unsigned long event,
+				    struct net_device *bond_dev)
 {
 	struct bonding *event_bond = netdev_priv(bond_dev);
 
@@ -3490,7 +3476,8 @@ static int bond_master_netdev_event(unsigned long event, struct net_device *bond
 	return NOTIFY_DONE;
 }
 
-static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev)
+static int bond_slave_netdev_event(unsigned long event,
+				   struct net_device *slave_dev)
 {
 	struct net_device *bond_dev = slave_dev->master;
 	struct bonding *bond = netdev_priv(bond_dev);
@@ -3568,7 +3555,8 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
  * locks for us to safely manipulate the slave devices (RTNL lock,
  * dev_probe_lock).
  */
-static int bond_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
+static int bond_netdev_event(struct notifier_block *this,
+			     unsigned long event, void *ptr)
 {
 	struct net_device *event_dev = (struct net_device *)ptr;
 
@@ -3923,9 +3911,9 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 	switch (cmd) {
 	case SIOCGMIIPHY:
 		mii = if_mii(ifr);
-		if (!mii) {
+		if (!mii)
 			return -EINVAL;
-		}
+
 		mii->phy_id = 0;
 		/* Fall Through */
 	case SIOCGMIIREG:
@@ -3934,18 +3922,18 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 		 * instead of SIOCGMIIPHY.
 		 */
 		mii = if_mii(ifr);
-		if (!mii) {
+		if (!mii)
 			return -EINVAL;
-		}
+
 
 		if (mii->reg_num == 1) {
 			struct bonding *bond = netdev_priv(bond_dev);
 			mii->val_out = 0;
 			read_lock(&bond->lock);
 			read_lock(&bond->curr_slave_lock);
-			if (netif_carrier_ok(bond->dev)) {
+			if (netif_carrier_ok(bond->dev))
 				mii->val_out = BMSR_LSTATUS;
-			}
+
 			read_unlock(&bond->curr_slave_lock);
 			read_unlock(&bond->lock);
 		}
@@ -3955,32 +3943,26 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 	case SIOCBONDINFOQUERY:
 		u_binfo = (struct ifbond __user *)ifr->ifr_data;
 
-		if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond))) {
+		if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
 			return -EFAULT;
-		}
 
 		res = bond_info_query(bond_dev, &k_binfo);
-		if (res == 0) {
-			if (copy_to_user(u_binfo, &k_binfo, sizeof(ifbond))) {
-				return -EFAULT;
-			}
-		}
+		if (res == 0 &&
+		    copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
+			return -EFAULT;
 
 		return res;
 	case BOND_SLAVE_INFO_QUERY_OLD:
 	case SIOCBONDSLAVEINFOQUERY:
 		u_sinfo = (struct ifslave __user *)ifr->ifr_data;
 
-		if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave))) {
+		if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
 			return -EFAULT;
-		}
 
 		res = bond_slave_info_query(bond_dev, &k_sinfo);
-		if (res == 0) {
-			if (copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave))) {
-				return -EFAULT;
-			}
-		}
+		if (res == 0 &&
+		    copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
+			return -EFAULT;
 
 		return res;
 	default:
@@ -3988,18 +3970,16 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 		break;
 	}
 
-	if (!capable(CAP_NET_ADMIN)) {
+	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
-	}
 
-	down_write(&(bonding_rwsem));
 	slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);
 
 	pr_debug("slave_dev=%p: \n", slave_dev);
 
-	if (!slave_dev) {
+	if (!slave_dev)
 		res = -ENODEV;
-	} else {
+	else {
 		pr_debug("slave_dev->name=%s: \n", slave_dev->name);
 		switch (cmd) {
 		case BOND_ENSLAVE_OLD:
@@ -4025,7 +4005,6 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 		dev_put(slave_dev);
 	}
 
-	up_write(&(bonding_rwsem));
 	return res;
 }
 
@@ -4037,30 +4016,30 @@ static void bond_set_multicast_list(struct net_device *bond_dev)
 	/*
 	 * Do promisc before checking multicast_mode
 	 */
-	if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC)) {
+	if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC))
 		/*
 		 * FIXME: Need to handle the error when one of the multi-slaves
 		 * encounters error.
 		 */
 		bond_set_promiscuity(bond, 1);
-	}
 
-	if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC)) {
+
+	if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC))
 		bond_set_promiscuity(bond, -1);
-	}
+
 
 	/* set allmulti flag to slaves */
-	if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI)) {
+	if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI))
 		/*
 		 * FIXME: Need to handle the error when one of the multi-slaves
 		 * encounters error.
 		 */
 		bond_set_allmulti(bond, 1);
-	}
 
-	if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI)) {
+
+	if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI))
 		bond_set_allmulti(bond, -1);
-	}
+
 
 	read_lock(&bond->lock);
 
@@ -4068,16 +4047,14 @@ static void bond_set_multicast_list(struct net_device *bond_dev)
 
 	/* looking for addresses to add to slaves' mc list */
 	for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
-		if (!bond_mc_list_find_dmi(dmi, bond->mc_list)) {
+		if (!bond_mc_list_find_dmi(dmi, bond->mc_list))
 			bond_mc_add(bond, dmi->dmi_addr, dmi->dmi_addrlen);
-		}
 	}
 
 	/* looking for addresses to delete from slaves' list */
 	for (dmi = bond->mc_list; dmi; dmi = dmi->next) {
-		if (!bond_mc_list_find_dmi(dmi, bond_dev->mc_list)) {
+		if (!bond_mc_list_find_dmi(dmi, bond_dev->mc_list))
 			bond_mc_delete(bond, dmi->dmi_addr, dmi->dmi_addrlen);
-		}
 	}
 
 	/* save master's multicast list */
@@ -4197,9 +4174,8 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
 	if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
 		return 0;
 
-	if (!is_valid_ether_addr(sa->sa_data)) {
+	if (!is_valid_ether_addr(sa->sa_data))
 		return -EADDRNOTAVAIL;
-	}
 
 	/* Can't hold bond->lock with bh disabled here since
 	 * some base drivers panic. On the other hand we can't
@@ -4270,9 +4246,8 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
 
 	read_lock(&bond->lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	/*
 	 * Concurrent TX may collide on rr_tx_counter; we accept that
@@ -4282,9 +4257,8 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
 
 	bond_for_each_slave(bond, slave, i) {
 		slave_no--;
-		if (slave_no < 0) {
+		if (slave_no < 0)
 			break;
-		}
 	}
 
 	start_at = slave;
@@ -4319,9 +4293,8 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
 	read_lock(&bond->lock);
 	read_lock(&bond->curr_slave_lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	if (!bond->curr_active_slave)
 		goto out;
@@ -4329,10 +4302,10 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
 	res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
 
 out:
-	if (res) {
+	if (res)
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
-	}
+
 	read_unlock(&bond->curr_slave_lock);
 	read_unlock(&bond->lock);
 	return 0;
@@ -4353,17 +4326,15 @@ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
 
 	read_lock(&bond->lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt);
 
 	bond_for_each_slave(bond, slave, i) {
 		slave_no--;
-		if (slave_no < 0) {
+		if (slave_no < 0)
 			break;
-		}
 	}
 
 	start_at = slave;
@@ -4399,17 +4370,15 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 
 	read_lock(&bond->lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	read_lock(&bond->curr_slave_lock);
 	start_at = bond->curr_active_slave;
 	read_unlock(&bond->curr_slave_lock);
 
-	if (!start_at) {
+	if (!start_at)
 		goto out;
-	}
 
 	bond_for_each_slave_from(bond, slave, i, start_at) {
 		if (IS_UP(slave->dev) &&
@@ -4418,7 +4387,7 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 			if (tx_dev) {
 				struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
 				if (!skb2) {
-					printk(KERN_ERR DRV_NAME
+					pr_err(DRV_NAME
 					       ": %s: Error: bond_xmit_broadcast(): "
 					       "skb_clone() failed\n",
 					       bond_dev->name);
@@ -4435,15 +4404,14 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 		}
 	}
 
-	if (tx_dev) {
+	if (tx_dev)
 		res = bond_dev_queue_xmit(bond, skb, tx_dev);
-	}
 
 out:
-	if (res) {
+	if (res)
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
-	}
+
 	/* frame sent to all suitable interfaces */
 	read_unlock(&bond->lock);
 	return 0;
@@ -4487,7 +4455,7 @@ static int bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		return bond_alb_xmit(skb, dev);
 	default:
 		/* Should never happen, mode already checked */
-		printk(KERN_ERR DRV_NAME ": %s: Error: Unknown bonding mode %d\n",
+		pr_err(DRV_NAME ": %s: Error: Unknown bonding mode %d\n",
 		     dev->name, bond->params.mode);
 		WARN_ON_ONCE(1);
 		dev_kfree_skb(skb);
@@ -4524,7 +4492,7 @@ void bond_set_mode_ops(struct bonding *bond, int mode)
 		break;
 	default:
 		/* Should never happen, mode already checked */
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: Unknown bonding mode %d\n",
 		       bond_dev->name,
 		       mode);
@@ -4551,6 +4519,8 @@ static const struct ethtool_ops bond_ethtool_ops = {
 };
 
 static const struct net_device_ops bond_netdev_ops = {
+	.ndo_init		= bond_init,
+	.ndo_uninit		= bond_uninit,
 	.ndo_open		= bond_open,
 	.ndo_stop		= bond_close,
 	.ndo_start_xmit		= bond_start_xmit,
@@ -4565,48 +4535,34 @@ static const struct net_device_ops bond_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= bond_vlan_rx_kill_vid,
 };
 
-/*
- * Does not allocate but creates a /proc entry.
- * Allowed to fail.
- */
-static int bond_init(struct net_device *bond_dev, struct bond_params *params)
+static void bond_setup(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
-	pr_debug("Begin bond_init for %s\n", bond_dev->name);
-
 	/* initialize rwlocks */
 	rwlock_init(&bond->lock);
 	rwlock_init(&bond->curr_slave_lock);
 
-	bond->params = *params; /* copy params struct */
-
-	bond->wq = create_singlethread_workqueue(bond_dev->name);
-	if (!bond->wq)
-		return -ENOMEM;
+	bond->params = bonding_defaults;
 
 	/* Initialize pointers */
-	bond->first_slave = NULL;
-	bond->curr_active_slave = NULL;
-	bond->current_arp_slave = NULL;
-	bond->primary_slave = NULL;
 	bond->dev = bond_dev;
-	bond->send_grat_arp = 0;
-	bond->send_unsol_na = 0;
-	bond->setup_by_slave = 0;
 	INIT_LIST_HEAD(&bond->vlan_list);
 
 	/* Initialize the device entry points */
+	ether_setup(bond_dev);
 	bond_dev->netdev_ops = &bond_netdev_ops;
 	bond_dev->ethtool_ops = &bond_ethtool_ops;
 	bond_set_mode_ops(bond, bond->params.mode);
 
-	bond_dev->destructor = bond_destructor;
+	bond_dev->destructor = free_netdev;
 
 	/* Initialize the device options */
 	bond_dev->tx_queue_len = 0;
 	bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
 	bond_dev->priv_flags |= IFF_BONDING;
+	bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
+
 	if (bond->params.arp_interval)
 		bond_dev->priv_flags |= IFF_MASTER_ARPMON;
 
@@ -4631,12 +4587,6 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params)
 			       NETIF_F_HW_VLAN_RX |
 			       NETIF_F_HW_VLAN_FILTER);
 
-#ifdef CONFIG_PROC_FS
-	bond_create_proc_entry(bond);
-#endif
-	list_add_tail(&bond->bond_list, &bond_dev_list);
-
-	return 0;
 }
 
 static void bond_work_cancel_all(struct bonding *bond)
@@ -4671,9 +4621,7 @@ static void bond_deinit(struct net_device *bond_dev)
 
 	bond_work_cancel_all(bond);
 
-#ifdef CONFIG_PROC_FS
 	bond_remove_proc_entry(bond);
-#endif
 }
 
 /* Unregister and free all bond devices.
@@ -4689,12 +4637,10 @@ static void bond_free_all(void)
 		bond_work_cancel_all(bond);
 		/* Release the bonded slaves */
 		bond_release_all(bond_dev);
-		bond_destroy(bond);
+		unregister_netdevice(bond_dev);
 	}
 
-#ifdef CONFIG_PROC_FS
 	bond_destroy_proc_dir();
-#endif
 }
 
 /*------------------------- Module initialization ---------------------------*/
@@ -4742,7 +4688,7 @@ static int bond_check_params(struct bond_params *params)
 	if (mode) {
 		bond_mode = bond_parse_parm(mode, bond_mode_tbl);
 		if (bond_mode == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: Invalid bonding mode \"%s\"\n",
 			       mode == NULL ? "NULL" : mode);
 			return -EINVAL;
@@ -4752,16 +4698,16 @@ static int bond_check_params(struct bond_params *params)
 	if (xmit_hash_policy) {
 		if ((bond_mode != BOND_MODE_XOR) &&
 		    (bond_mode != BOND_MODE_8023AD)) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": xor_mode param is irrelevant in mode %s\n",
 			       bond_mode_name(bond_mode));
 		} else {
 			xmit_hashtype = bond_parse_parm(xmit_hash_policy,
 							xmit_hashtype_tbl);
 			if (xmit_hashtype == -1) {
-				printk(KERN_ERR DRV_NAME
-			       	": Error: Invalid xmit_hash_policy \"%s\"\n",
-			       	xmit_hash_policy == NULL ? "NULL" :
+				pr_err(DRV_NAME
+				       ": Error: Invalid xmit_hash_policy \"%s\"\n",
+				       xmit_hash_policy == NULL ? "NULL" :
 				       xmit_hash_policy);
 				return -EINVAL;
 			}
@@ -4770,13 +4716,13 @@ static int bond_check_params(struct bond_params *params)
 
 	if (lacp_rate) {
 		if (bond_mode != BOND_MODE_8023AD) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": lacp_rate param is irrelevant in mode %s\n",
 			       bond_mode_name(bond_mode));
 		} else {
 			lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
 			if (lacp_fast == -1) {
-				printk(KERN_ERR DRV_NAME
+				pr_err(DRV_NAME
 				       ": Error: Invalid lacp rate \"%s\"\n",
 				       lacp_rate == NULL ? "NULL" : lacp_rate);
 				return -EINVAL;
@@ -4787,14 +4733,14 @@ static int bond_check_params(struct bond_params *params)
 	if (ad_select) {
 		params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
 		if (params->ad_select == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: Invalid ad_select \"%s\"\n",
 			       ad_select == NULL ? "NULL" : ad_select);
 			return -EINVAL;
 		}
 
 		if (bond_mode != BOND_MODE_8023AD) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": ad_select param only affects 802.3ad mode\n");
 		}
 	} else {
@@ -4802,7 +4748,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (max_bonds < 0 || max_bonds > INT_MAX) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: max_bonds (%d) not in range %d-%d, so it "
 		       "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
 		       max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
@@ -4810,7 +4756,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (miimon < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: miimon module parameter (%d), "
 		       "not in range 0-%d, so it was reset to %d\n",
 		       miimon, INT_MAX, BOND_LINK_MON_INTERV);
@@ -4818,7 +4764,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (updelay < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: updelay module parameter (%d), "
 		       "not in range 0-%d, so it was reset to 0\n",
 		       updelay, INT_MAX);
@@ -4826,7 +4772,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (downdelay < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: downdelay module parameter (%d), "
 		       "not in range 0-%d, so it was reset to 0\n",
 		       downdelay, INT_MAX);
@@ -4834,7 +4780,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if ((use_carrier != 0) && (use_carrier != 1)) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: use_carrier module parameter (%d), "
 		       "not of valid value (0/1), so it was set to 1\n",
 		       use_carrier);
@@ -4842,14 +4788,14 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (num_grat_arp < 0 || num_grat_arp > 255) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: num_grat_arp (%d) not in range 0-255 so it "
 		       "was reset to 1 \n", num_grat_arp);
 		num_grat_arp = 1;
 	}
 
 	if (num_unsol_na < 0 || num_unsol_na > 255) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: num_unsol_na (%d) not in range 0-255 so it "
 		       "was reset to 1 \n", num_unsol_na);
 		num_unsol_na = 1;
@@ -4858,12 +4804,12 @@ static int bond_check_params(struct bond_params *params)
 	/* reset values for 802.3ad */
 	if (bond_mode == BOND_MODE_8023AD) {
 		if (!miimon) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon must be specified, "
 			       "otherwise bonding will not detect link "
 			       "failure, speed and duplex which are "
 			       "essential for 802.3ad operation\n");
-			printk(KERN_WARNING "Forcing miimon to 100msec\n");
+			pr_warning("Forcing miimon to 100msec\n");
 			miimon = 100;
 		}
 	}
@@ -4872,12 +4818,12 @@ static int bond_check_params(struct bond_params *params)
 	if ((bond_mode == BOND_MODE_TLB) ||
 	    (bond_mode == BOND_MODE_ALB)) {
 		if (!miimon) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon must be specified, "
 			       "otherwise bonding will not detect link "
 			       "failure and link speed which are essential "
 			       "for TLB/ALB load balancing\n");
-			printk(KERN_WARNING "Forcing miimon to 100msec\n");
+			pr_warning("Forcing miimon to 100msec\n");
 			miimon = 100;
 		}
 	}
@@ -4897,7 +4843,7 @@ static int bond_check_params(struct bond_params *params)
 			/* just warn the user the up/down delay will have
 			 * no effect since miimon is zero...
 			 */
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon module parameter not set "
 			       "and updelay (%d) or downdelay (%d) module "
 			       "parameter is set; updelay and downdelay have "
@@ -4907,7 +4853,7 @@ static int bond_check_params(struct bond_params *params)
 	} else {
 		/* don't allow arp monitoring */
 		if (arp_interval) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon (%d) and arp_interval (%d) "
 			       "can't be used simultaneously, disabling ARP "
 			       "monitoring\n",
@@ -4916,7 +4862,7 @@ static int bond_check_params(struct bond_params *params)
 		}
 
 		if ((updelay % miimon) != 0) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: updelay (%d) is not a multiple "
 			       "of miimon (%d), updelay rounded to %d ms\n",
 			       updelay, miimon, (updelay / miimon) * miimon);
@@ -4925,7 +4871,7 @@ static int bond_check_params(struct bond_params *params)
 		updelay /= miimon;
 
 		if ((downdelay % miimon) != 0) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: downdelay (%d) is not a multiple "
 			       "of miimon (%d), downdelay rounded to %d ms\n",
 			       downdelay, miimon,
@@ -4936,7 +4882,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (arp_interval < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: arp_interval module parameter (%d) "
 		       ", not in range 0-%d, so it was reset to %d\n",
 		       arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
@@ -4949,7 +4895,7 @@ static int bond_check_params(struct bond_params *params)
 		/* not complete check, but should be good enough to
 		   catch mistakes */
 		if (!isdigit(arp_ip_target[arp_ip_count][0])) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: bad arp_ip_target module parameter "
 			       "(%s), ARP monitoring will not be performed\n",
 			       arp_ip_target[arp_ip_count]);
@@ -4962,7 +4908,7 @@ static int bond_check_params(struct bond_params *params)
 
 	if (arp_interval && !arp_ip_count) {
 		/* don't allow arping if no arp_ip_target given... */
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: arp_interval module parameter (%d) "
 		       "specified without providing an arp_ip_target "
 		       "parameter, arp_interval was reset to 0\n",
@@ -4972,12 +4918,12 @@ static int bond_check_params(struct bond_params *params)
 
 	if (arp_validate) {
 		if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
-			printk(KERN_ERR DRV_NAME
-	       ": arp_validate only supported in active-backup mode\n");
+			pr_err(DRV_NAME
+			       ": arp_validate only supported in active-backup mode\n");
 			return -EINVAL;
 		}
 		if (!arp_interval) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": arp_validate requires arp_interval\n");
 			return -EINVAL;
 		}
@@ -4985,7 +4931,7 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = bond_parse_parm(arp_validate,
 						     arp_validate_tbl);
 		if (arp_validate_value == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: invalid arp_validate \"%s\"\n",
 			       arp_validate == NULL ? "NULL" : arp_validate);
 			return -EINVAL;
@@ -4994,20 +4940,20 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = 0;
 
 	if (miimon) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": MII link monitoring set to %d ms\n",
 		       miimon);
 	} else if (arp_interval) {
 		int i;
 
-		printk(KERN_INFO DRV_NAME
-		       ": ARP monitoring set to %d ms, validate %s, with %d target(s):",
+		pr_info(DRV_NAME ": ARP monitoring set to %d ms,"
+		       " validate %s, with %d target(s):",
 		       arp_interval,
 		       arp_validate_tbl[arp_validate_value].modename,
 		       arp_ip_count);
 
 		for (i = 0; i < arp_ip_count; i++)
-			printk (" %s", arp_ip_target[i]);
+			printk(" %s", arp_ip_target[i]);
 
 		printk("\n");
 
@@ -5015,7 +4961,7 @@ static int bond_check_params(struct bond_params *params)
 		/* miimon and arp_interval not set, we need one so things
 		 * work as expected, see bonding.txt for details
 		 */
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: either miimon or arp_interval and "
 		       "arp_ip_target module parameters must be specified, "
 		       "otherwise bonding will not detect link failures! see "
@@ -5026,7 +4972,7 @@ static int bond_check_params(struct bond_params *params)
 		/* currently, using a primary only makes sense
 		 * in active backup, TLB or ALB modes
 		 */
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: %s primary device specified but has no "
 		       "effect in %s mode\n",
 		       primary, bond_mode_name(bond_mode));
@@ -5037,14 +4983,14 @@ static int bond_check_params(struct bond_params *params)
 		fail_over_mac_value = bond_parse_parm(fail_over_mac,
 						      fail_over_mac_tbl);
 		if (fail_over_mac_value == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: invalid fail_over_mac \"%s\"\n",
 			       arp_validate == NULL ? "NULL" : arp_validate);
 			return -EINVAL;
 		}
 
 		if (bond_mode != BOND_MODE_ACTIVEBACKUP)
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: fail_over_mac only affects "
 			       "active-backup mode.\n");
 	} else {
@@ -5094,37 +5040,53 @@ static void bond_set_lockdep_class(struct net_device *dev)
 	netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
 }
 
+/*
+ * Called from registration process
+ */
+static int bond_init(struct net_device *bond_dev)
+{
+	struct bonding *bond = netdev_priv(bond_dev);
+
+	pr_debug("Begin bond_init for %s\n", bond_dev->name);
+
+	bond->wq = create_singlethread_workqueue(bond_dev->name);
+	if (!bond->wq)
+		return -ENOMEM;
+
+	bond_set_lockdep_class(bond_dev);
+
+	netif_carrier_off(bond_dev);
+
+	bond_create_proc_entry(bond);
+	list_add_tail(&bond->bond_list, &bond_dev_list);
+
+	return 0;
+}
+
 /* Create a new bond based on the specified name and bonding parameters.
  * If name is NULL, obtain a suitable "bond%d" name for us.
  * Caller must NOT hold rtnl_lock; we need to release it here before we
  * set up our sysfs entries.
  */
-int bond_create(char *name, struct bond_params *params)
+int bond_create(const char *name)
 {
 	struct net_device *bond_dev;
-	struct bonding *bond;
 	int res;
 
 	rtnl_lock();
-	down_write(&bonding_rwsem);
-
 	/* Check to see if the bond already exists. */
-	if (name) {
-		list_for_each_entry(bond, &bond_dev_list, bond_list)
-			if (strnicmp(bond->dev->name, name, IFNAMSIZ) == 0) {
-				printk(KERN_ERR DRV_NAME
-			       ": cannot add bond %s; it already exists\n",
-				       name);
-				res = -EPERM;
-				goto out_rtnl;
-			}
+	/* FIXME: pass netns from caller */
+	if (name && __dev_get_by_name(&init_net, name)) {
+		pr_err(DRV_NAME ": cannot add bond %s; already exists\n",
+		       name);
+		res = -EEXIST;
+		goto out_rtnl;
 	}
 
 	bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
-				ether_setup);
+				bond_setup);
 	if (!bond_dev) {
-		printk(KERN_ERR DRV_NAME
-		       ": %s: eek! can't alloc netdev!\n",
+		pr_err(DRV_NAME ": %s: eek! can't alloc netdev!\n",
 		       name);
 		res = -ENOMEM;
 		goto out_rtnl;
@@ -5136,43 +5098,24 @@ int bond_create(char *name, struct bond_params *params)
 			goto out_netdev;
 	}
 
-	/* bond_init() must be called after dev_alloc_name() (for the
-	 * /proc files), but before register_netdevice(), because we
-	 * need to set function pointers.
-	 */
-
-	res = bond_init(bond_dev, params);
-	if (res < 0) {
-		goto out_netdev;
-	}
-
 	res = register_netdevice(bond_dev);
-	if (res < 0) {
+	if (res < 0)
 		goto out_bond;
-	}
-
-	bond_set_lockdep_class(bond_dev);
-
-	netif_carrier_off(bond_dev);
 
-	up_write(&bonding_rwsem);
-	rtnl_unlock(); /* allows sysfs registration of net device */
 	res = bond_create_sysfs_entry(netdev_priv(bond_dev));
 	if (res < 0)
 		goto out_unreg;
 
+	rtnl_unlock();
 	return 0;
 
 out_unreg:
-	rtnl_lock();
-	down_write(&bonding_rwsem);
 	unregister_netdevice(bond_dev);
 out_bond:
 	bond_deinit(bond_dev);
 out_netdev:
 	free_netdev(bond_dev);
 out_rtnl:
-	up_write(&bonding_rwsem);
 	rtnl_unlock();
 	return res;
 }
@@ -5182,21 +5125,16 @@ static int __init bonding_init(void)
 	int i;
 	int res;
 
-	printk(KERN_INFO "%s", version);
+	pr_info("%s", version);
 
 	res = bond_check_params(&bonding_defaults);
-	if (res) {
+	if (res)
 		goto out;
-	}
 
-#ifdef CONFIG_PROC_FS
 	bond_create_proc_dir();
-#endif
-
-	init_rwsem(&bonding_rwsem);
 
 	for (i = 0; i < max_bonds; i++) {
-		res = bond_create(NULL, &bonding_defaults);
+		res = bond_create(NULL);
 		if (res)
 			goto err;
 	}
@@ -5238,13 +5176,3 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
-MODULE_SUPPORTED_DEVICE("most ethernet devices");
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
-
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index d2873153522..55bf34f59bb 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1,4 +1,3 @@
-
 /*
  * Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
  *
@@ -34,33 +33,14 @@
 #include <linux/ctype.h>
 #include <linux/inet.h>
 #include <linux/rtnetlink.h>
+#include <linux/etherdevice.h>
 #include <net/net_namespace.h>
 
 #include "bonding.h"
 
-#define to_dev(obj)	container_of(obj,struct device,kobj)
+#define to_dev(obj)	container_of(obj, struct device, kobj)
 #define to_bond(cd)	((struct bonding *)(netdev_priv(to_net_dev(cd))))
 
-/*---------------------------- Declarations -------------------------------*/
-
-static int expected_refcount = -1;
-/*--------------------------- Data Structures -----------------------------*/
-
-/* Bonding sysfs lock.  Why can't we just use the subsystem lock?
- * Because kobject_register tries to acquire the subsystem lock.  If
- * we already hold the lock (which we would if the user was creating
- * a new bond through the sysfs interface), we deadlock.
- * This lock is only needed when deleting a bond - we need to make sure
- * that we don't collide with an ongoing ioctl.
- */
-
-struct rw_semaphore bonding_rwsem;
-
-
-
-
-/*------------------------------ Functions --------------------------------*/
-
 /*
  * "show" function for the bond_masters attribute.
  * The class parameter is ignored.
@@ -70,7 +50,7 @@ static ssize_t bonding_show_bonds(struct class *cls, char *buf)
 	int res = 0;
 	struct bonding *bond;
 
-	down_read(&(bonding_rwsem));
+	rtnl_lock();
 
 	list_for_each_entry(bond, &bond_dev_list, bond_list) {
 		if (res > (PAGE_SIZE - IFNAMSIZ)) {
@@ -84,10 +64,22 @@ static ssize_t bonding_show_bonds(struct class *cls, char *buf)
 	}
 	if (res)
 		buf[res-1] = '\n'; /* eat the leftover space */
-	up_read(&(bonding_rwsem));
+
+	rtnl_unlock();
 	return res;
 }
 
+static struct net_device *bond_get_by_name(const char *ifname)
+{
+	struct bonding *bond;
+
+	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+		if (strncmp(bond->dev->name, ifname, IFNAMSIZ) == 0)
+			return bond->dev;
+	}
+	return NULL;
+}
+
 /*
  * "store" function for the bond_masters attribute.  This is what
  * creates and deletes entire bonds.
@@ -96,12 +88,12 @@ static ssize_t bonding_show_bonds(struct class *cls, char *buf)
  *
  */
 
-static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t count)
+static ssize_t bonding_store_bonds(struct class *cls,
+				   const char *buffer, size_t count)
 {
 	char command[IFNAMSIZ + 1] = {0, };
 	char *ifname;
 	int rv, res = count;
-	struct bonding *bond;
 
 	sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
 	ifname = command + 1;
@@ -110,67 +102,48 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t
 		goto err_no_cmd;
 
 	if (command[0] == '+') {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 			": %s is being created...\n", ifname);
-		rv = bond_create(ifname, &bonding_defaults);
+		rv = bond_create(ifname);
 		if (rv) {
-			printk(KERN_INFO DRV_NAME ": Bond creation failed.\n");
+			pr_info(DRV_NAME ": Bond creation failed.\n");
 			res = rv;
 		}
-		goto out;
-	}
+	} else if (command[0] == '-') {
+		struct net_device *bond_dev;
 
-	if (command[0] == '-') {
 		rtnl_lock();
-		down_write(&bonding_rwsem);
-
-		list_for_each_entry(bond, &bond_dev_list, bond_list)
-			if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) {
-				/* check the ref count on the bond's kobject.
-				 * If it's > expected, then there's a file open,
-				 * and we have to fail.
-				 */
-				if (atomic_read(&bond->dev->dev.kobj.kref.refcount)
-							> expected_refcount){
-					printk(KERN_INFO DRV_NAME
-						": Unable remove bond %s due to open references.\n",
-						ifname);
-					res = -EPERM;
-					goto out_unlock;
-				}
-				printk(KERN_INFO DRV_NAME
-					": %s is being deleted...\n",
-					bond->dev->name);
-				bond_destroy(bond);
-				goto out_unlock;
-			}
-
-		printk(KERN_ERR DRV_NAME
-			": unable to delete non-existent bond %s\n", ifname);
-		res = -ENODEV;
-		goto out_unlock;
-	}
-
-err_no_cmd:
-	printk(KERN_ERR DRV_NAME
-		": no command found in bonding_masters. Use +ifname or -ifname.\n");
-	return -EPERM;
-
-out_unlock:
-	up_write(&bonding_rwsem);
-	rtnl_unlock();
+		bond_dev = bond_get_by_name(ifname);
+		if (bond_dev) {
+			pr_info(DRV_NAME ": %s is being deleted...\n",
+				ifname);
+			unregister_netdevice(bond_dev);
+		} else {
+			pr_err(DRV_NAME ": unable to delete non-existent %s\n",
+			       ifname);
+			res = -ENODEV;
+		}
+		rtnl_unlock();
+	} else
+		goto err_no_cmd;
 
 	/* Always return either count or an error.  If you return 0, you'll
 	 * get called forever, which is bad.
 	 */
-out:
 	return res;
+
+err_no_cmd:
+	pr_err(DRV_NAME ": no command found in bonding_masters."
+	       " Use +ifname or -ifname.\n");
+	return -EPERM;
 }
+
 /* class attribute for bond_masters file.  This ends up in /sys/class/net */
 static CLASS_ATTR(bonding_masters,  S_IWUSR | S_IRUGO,
 		  bonding_show_bonds, bonding_store_bonds);
 
-int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave)
+int bond_create_slave_symlinks(struct net_device *master,
+			       struct net_device *slave)
 {
 	char linkname[IFNAMSIZ+7];
 	int ret = 0;
@@ -181,19 +154,20 @@ int bond_create_slave_symlinks(struct net_device *master, struct net_device *sla
 	if (ret)
 		return ret;
 	/* next, create a link from the master to the slave */
-	sprintf(linkname,"slave_%s",slave->name);
+	sprintf(linkname, "slave_%s", slave->name);
 	ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
 				linkname);
 	return ret;
 
 }
 
-void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave)
+void bond_destroy_slave_symlinks(struct net_device *master,
+				 struct net_device *slave)
 {
 	char linkname[IFNAMSIZ+7];
 
 	sysfs_remove_link(&(slave->dev.kobj), "master");
-	sprintf(linkname,"slave_%s",slave->name);
+	sprintf(linkname, "slave_%s", slave->name);
 	sysfs_remove_link(&(master->dev.kobj), linkname);
 }
 
@@ -251,8 +225,8 @@ static ssize_t bonding_store_slaves(struct device *d,
 
 	/* Note:  We can't hold bond->lock here, as bond_create grabs it. */
 
-	rtnl_lock();
-	down_write(&(bonding_rwsem));
+	if (!rtnl_trylock())
+		return restart_syscall();
 
 	sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
 	ifname = command + 1;
@@ -264,46 +238,47 @@ static ssize_t bonding_store_slaves(struct device *d,
 
 		/* Got a slave name in ifname.  Is it already in the list? */
 		found = 0;
-		read_lock(&bond->lock);
-		bond_for_each_slave(bond, slave, i)
-			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
-				printk(KERN_ERR DRV_NAME
-				       ": %s: Interface %s is already enslaved!\n",
-				       bond->dev->name, ifname);
-				ret = -EPERM;
-				read_unlock(&bond->lock);
-				goto out;
-			}
 
-		read_unlock(&bond->lock);
-		printk(KERN_INFO DRV_NAME ": %s: Adding slave %s.\n",
-		       bond->dev->name, ifname);
-		dev = dev_get_by_name(&init_net, ifname);
+		/* FIXME: get netns from sysfs object */
+		dev = __dev_get_by_name(&init_net, ifname);
 		if (!dev) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: Interface %s does not exist!\n",
 			       bond->dev->name, ifname);
-			ret = -EPERM;
+			ret = -ENODEV;
 			goto out;
 		}
-		else
-			dev_put(dev);
 
 		if (dev->flags & IFF_UP) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error: Unable to enslave %s "
 			       "because it is already up.\n",
 			       bond->dev->name, dev->name);
 			ret = -EPERM;
 			goto out;
 		}
+
+		read_lock(&bond->lock);
+		bond_for_each_slave(bond, slave, i)
+			if (slave->dev == dev) {
+				pr_err(DRV_NAME
+				       ": %s: Interface %s is already enslaved!\n",
+				       bond->dev->name, ifname);
+				ret = -EPERM;
+				read_unlock(&bond->lock);
+				goto out;
+			}
+		read_unlock(&bond->lock);
+
+		pr_info(DRV_NAME ": %s: Adding slave %s.\n",
+			bond->dev->name, ifname);
+
 		/* If this is the first slave, then we need to set
 		   the master's hardware address to be the same as the
 		   slave's. */
-		if (!(*((u32 *) & (bond->dev->dev_addr[0])))) {
+		if (is_zero_ether_addr(bond->dev->dev_addr))
 			memcpy(bond->dev->dev_addr, dev->dev_addr,
 			       dev->addr_len);
-		}
 
 		/* Set the slave's MTU to match the bond */
 		original_mtu = dev->mtu;
@@ -317,9 +292,9 @@ static ssize_t bonding_store_slaves(struct device *d,
 		bond_for_each_slave(bond, slave, i)
 			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0)
 				slave->original_mtu = original_mtu;
-		if (res) {
+		if (res)
 			ret = res;
-		}
+
 		goto out;
 	}
 
@@ -333,7 +308,7 @@ static ssize_t bonding_store_slaves(struct device *d,
 				break;
 			}
 		if (dev) {
-			printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n",
+			pr_info(DRV_NAME ": %s: Removing slave %s\n",
 				bond->dev->name, dev->name);
 				res = bond_release(bond->dev, dev);
 			if (res) {
@@ -342,9 +317,9 @@ static ssize_t bonding_store_slaves(struct device *d,
 			}
 			/* set the slave MTU to the default */
 			dev_set_mtu(dev, original_mtu);
-		}
-		else {
-			printk(KERN_ERR DRV_NAME ": unable to remove non-existent slave %s for bond %s.\n",
+		} else {
+			pr_err(DRV_NAME ": unable to remove non-existent"
+			       " slave %s for bond %s.\n",
 				ifname, bond->dev->name);
 			ret = -ENODEV;
 		}
@@ -352,16 +327,16 @@ static ssize_t bonding_store_slaves(struct device *d,
 	}
 
 err_no_cmd:
-	printk(KERN_ERR DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
+	pr_err(DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
 	ret = -EPERM;
 
 out:
-	up_write(&(bonding_rwsem));
 	rtnl_unlock();
 	return ret;
 }
 
-static DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves);
+static DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves,
+		   bonding_store_slaves);
 
 /*
  * Show and set the bonding mode.  The bond interface must be down to
@@ -385,16 +360,15 @@ static ssize_t bonding_store_mode(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
-		       ": unable to update mode of %s because interface is up.\n",
-		       bond->dev->name);
+		pr_err(DRV_NAME ": unable to update mode of %s"
+		       " because interface is up.\n", bond->dev->name);
 		ret = -EPERM;
 		goto out;
 	}
 
 	new_value = bond_parse_parm(buf, bond_mode_tbl);
 	if (new_value < 0)  {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid mode value %.*s.\n",
 		       bond->dev->name,
 		       (int)strlen(buf) - 1, buf);
@@ -409,17 +383,19 @@ static ssize_t bonding_store_mode(struct device *d,
 
 		bond->params.mode = new_value;
 		bond_set_mode_ops(bond, bond->params.mode);
-		printk(KERN_INFO DRV_NAME ": %s: setting mode to %s (%d).\n",
-			bond->dev->name, bond_mode_tbl[new_value].modename, new_value);
+		pr_info(DRV_NAME ": %s: setting mode to %s (%d).\n",
+		       bond->dev->name, bond_mode_tbl[new_value].modename,
+		       new_value);
 	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		   bonding_show_mode, bonding_store_mode);
 
 /*
- * Show and set the bonding transmit hash method.  The bond interface must be down to
- * change the xmit hash policy.
+ * Show and set the bonding transmit hash method.
+ * The bond interface must be down to change the xmit hash policy.
  */
 static ssize_t bonding_show_xmit_hash(struct device *d,
 				      struct device_attribute *attr,
@@ -440,7 +416,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       "%s: Interface is up. Unable to update xmit policy.\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -449,7 +425,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
 
 	new_value = bond_parse_parm(buf, xmit_hashtype_tbl);
 	if (new_value < 0)  {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid xmit hash policy value %.*s.\n",
 		       bond->dev->name,
 		       (int)strlen(buf) - 1, buf);
@@ -458,13 +434,15 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
 	} else {
 		bond->params.xmit_policy = new_value;
 		bond_set_mode_ops(bond, bond->params.mode);
-		printk(KERN_INFO DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
-			bond->dev->name, xmit_hashtype_tbl[new_value].modename, new_value);
+		pr_info(DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
+			bond->dev->name,
+			xmit_hashtype_tbl[new_value].modename, new_value);
 	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash);
+static DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR,
+		   bonding_show_xmit_hash, bonding_store_xmit_hash);
 
 /*
  * Show and set arp_validate.
@@ -489,39 +467,41 @@ static ssize_t bonding_store_arp_validate(struct device *d,
 
 	new_value = bond_parse_parm(buf, arp_validate_tbl);
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid arp_validate value %s\n",
 		       bond->dev->name, buf);
 		return -EINVAL;
 	}
 	if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: arp_validate only supported in active-backup mode.\n",
 		       bond->dev->name);
 		return -EINVAL;
 	}
-	printk(KERN_INFO DRV_NAME ": %s: setting arp_validate to %s (%d).\n",
+	pr_info(DRV_NAME ": %s: setting arp_validate to %s (%d).\n",
 	       bond->dev->name, arp_validate_tbl[new_value].modename,
 	       new_value);
 
-	if (!bond->params.arp_validate && new_value) {
+	if (!bond->params.arp_validate && new_value)
 		bond_register_arp(bond);
-	} else if (bond->params.arp_validate && !new_value) {
+	else if (bond->params.arp_validate && !new_value)
 		bond_unregister_arp(bond);
-	}
 
 	bond->params.arp_validate = new_value;
 
 	return count;
 }
 
-static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate, bonding_store_arp_validate);
+static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate,
+		   bonding_store_arp_validate);
 
 /*
  * Show and store fail_over_mac.  User only allowed to change the
  * value when there are no slaves.
  */
-static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attribute *attr, char *buf)
+static ssize_t bonding_show_fail_over_mac(struct device *d,
+					  struct device_attribute *attr,
+					  char *buf)
 {
 	struct bonding *bond = to_bond(d);
 
@@ -530,13 +510,15 @@ static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attrib
 		       bond->params.fail_over_mac);
 }
 
-static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t bonding_store_fail_over_mac(struct device *d,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
 {
 	int new_value;
 	struct bonding *bond = to_bond(d);
 
 	if (bond->slave_cnt != 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Can't alter fail_over_mac with slaves in bond.\n",
 		       bond->dev->name);
 		return -EPERM;
@@ -544,21 +526,22 @@ static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attri
 
 	new_value = bond_parse_parm(buf, fail_over_mac_tbl);
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid fail_over_mac value %s.\n",
 		       bond->dev->name, buf);
 		return -EINVAL;
 	}
 
 	bond->params.fail_over_mac = new_value;
-	printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
+	pr_info(DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
 	       bond->dev->name, fail_over_mac_tbl[new_value].modename,
 	       new_value);
 
 	return count;
 }
 
-static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR, bonding_show_fail_over_mac, bonding_store_fail_over_mac);
+static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR,
+		   bonding_show_fail_over_mac, bonding_store_fail_over_mac);
 
 /*
  * Show and set the arp timer interval.  There are two tricky bits
@@ -583,28 +566,28 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no arp_interval value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
 		       bond->dev->name, new_value, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	}
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: Setting ARP monitoring interval to %d.\n",
 	       bond->dev->name, new_value);
 	bond->params.arp_interval = new_value;
 	if (bond->params.arp_interval)
 		bond->dev->priv_flags |= IFF_MASTER_ARPMON;
 	if (bond->params.miimon) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: ARP monitoring cannot be used with MII monitoring. "
 		       "%s Disabling MII monitoring.\n",
 		       bond->dev->name, bond->dev->name);
@@ -615,7 +598,7 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 		}
 	}
 	if (!bond->params.arp_targets[0]) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: ARP monitoring has been set up, "
 		       "but no ARP targets have been specified.\n",
 		       bond->dev->name);
@@ -641,7 +624,8 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval);
+static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR,
+		   bonding_show_arp_interval, bonding_store_arp_interval);
 
 /*
  * Show and set the arp targets.
@@ -677,7 +661,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 	/* look for adds */
 	if (buf[0] == '+') {
 		if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: invalid ARP target %pI4 specified for addition\n",
 			       bond->dev->name, &newtarget);
 			ret = -EINVAL;
@@ -686,14 +670,14 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 		/* look for an empty slot to put the target in, and check for dupes */
 		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
 			if (targets[i] == newtarget) { /* duplicate */
-				printk(KERN_ERR DRV_NAME
+				pr_err(DRV_NAME
 				       ": %s: ARP target %pI4 is already present\n",
 				       bond->dev->name, &newtarget);
 				ret = -EINVAL;
 				goto out;
 			}
 			if (targets[i] == 0) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: adding ARP target %pI4.\n",
 				       bond->dev->name, &newtarget);
 				done = 1;
@@ -701,17 +685,16 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 			}
 		}
 		if (!done) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: ARP target table is full!\n",
 			       bond->dev->name);
 			ret = -EINVAL;
 			goto out;
 		}
 
-	}
-	else if (buf[0] == '-')	{
+	} else if (buf[0] == '-')	{
 		if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: invalid ARP target %pI4 specified for removal\n",
 			       bond->dev->name, &newtarget);
 			ret = -EINVAL;
@@ -721,7 +704,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
 			if (targets[i] == newtarget) {
 				int j;
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: removing ARP target %pI4.\n",
 				       bond->dev->name, &newtarget);
 				for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
@@ -732,15 +715,15 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 			}
 		}
 		if (!done) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: unable to remove nonexistent ARP target %pI4.\n",
 			       bond->dev->name, &newtarget);
 			ret = -EINVAL;
 			goto out;
 		}
-	}
-	else {
-		printk(KERN_ERR DRV_NAME ": no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+	} else {
+		pr_err(DRV_NAME ": no command found in arp_ip_targets file"
+		       " for bond %s. Use +<addr> or -<addr>.\n",
 			bond->dev->name);
 		ret = -EPERM;
 		goto out;
@@ -773,7 +756,7 @@ static ssize_t bonding_store_downdelay(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (!(bond->params.miimon)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to set down delay as MII monitoring is disabled\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -781,14 +764,14 @@ static ssize_t bonding_store_downdelay(struct device *d,
 	}
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no down delay value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
 		       bond->dev->name, new_value, 1, INT_MAX);
 		ret = -EINVAL;
@@ -803,15 +786,17 @@ static ssize_t bonding_store_downdelay(struct device *d,
 			       bond->params.miimon);
 		}
 		bond->params.downdelay = new_value / bond->params.miimon;
-		printk(KERN_INFO DRV_NAME ": %s: Setting down delay to %d.\n",
-		       bond->dev->name, bond->params.downdelay * bond->params.miimon);
+		pr_info(DRV_NAME ": %s: Setting down delay to %d.\n",
+		       bond->dev->name,
+		       bond->params.downdelay * bond->params.miimon);
 
 	}
 
 out:
 	return ret;
 }
-static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay);
+static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR,
+		   bonding_show_downdelay, bonding_store_downdelay);
 
 static ssize_t bonding_show_updelay(struct device *d,
 				    struct device_attribute *attr,
@@ -831,7 +816,7 @@ static ssize_t bonding_store_updelay(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (!(bond->params.miimon)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to set up delay as MII monitoring is disabled\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -839,14 +824,14 @@ static ssize_t bonding_store_updelay(struct device *d,
 	}
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no up delay value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
 		       bond->dev->name, new_value, 1, INT_MAX);
 		ret = -EINVAL;
@@ -861,7 +846,7 @@ static ssize_t bonding_store_updelay(struct device *d,
 			       bond->params.miimon);
 		}
 		bond->params.updelay = new_value / bond->params.miimon;
-		printk(KERN_INFO DRV_NAME ": %s: Setting up delay to %d.\n",
+		pr_info(DRV_NAME ": %s: Setting up delay to %d.\n",
 		       bond->dev->name, bond->params.updelay * bond->params.miimon);
 
 	}
@@ -869,7 +854,8 @@ static ssize_t bonding_store_updelay(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay);
+static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR,
+		   bonding_show_updelay, bonding_store_updelay);
 
 /*
  * Show and set the LACP interval.  Interface must be down, and the mode
@@ -894,7 +880,7 @@ static ssize_t bonding_store_lacp(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to update LACP rate because interface is up.\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -902,7 +888,7 @@ static ssize_t bonding_store_lacp(struct device *d,
 	}
 
 	if (bond->params.mode != BOND_MODE_8023AD) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -913,19 +899,20 @@ static ssize_t bonding_store_lacp(struct device *d,
 
 	if ((new_value == 1) || (new_value == 0)) {
 		bond->params.lacp_fast = new_value;
-		printk(KERN_INFO DRV_NAME
-		       ": %s: Setting LACP rate to %s (%d).\n",
-		       bond->dev->name, bond_lacp_tbl[new_value].modename, new_value);
+		pr_info(DRV_NAME ": %s: Setting LACP rate to %s (%d).\n",
+			bond->dev->name, bond_lacp_tbl[new_value].modename,
+			new_value);
 	} else {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid LACP rate value %.*s.\n",
-		     	bond->dev->name, (int)strlen(buf) - 1, buf);
+		       bond->dev->name, (int)strlen(buf) - 1, buf);
 		ret = -EINVAL;
 	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp);
+static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR,
+		   bonding_show_lacp, bonding_store_lacp);
 
 static ssize_t bonding_show_ad_select(struct device *d,
 				      struct device_attribute *attr,
@@ -947,7 +934,7 @@ static ssize_t bonding_store_ad_select(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to update ad_select because interface "
 		       "is up.\n", bond->dev->name);
 		ret = -EPERM;
@@ -958,12 +945,12 @@ static ssize_t bonding_store_ad_select(struct device *d,
 
 	if (new_value != -1) {
 		bond->params.ad_select = new_value;
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Setting ad_select to %s (%d).\n",
 		       bond->dev->name, ad_select_tbl[new_value].modename,
 		       new_value);
 	} else {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid ad_select value %.*s.\n",
 		       bond->dev->name, (int)strlen(buf) - 1, buf);
 		ret = -EINVAL;
@@ -971,8 +958,8 @@ static ssize_t bonding_store_ad_select(struct device *d,
 out:
 	return ret;
 }
-
-static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR, bonding_show_ad_select, bonding_store_ad_select);
+static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR,
+		   bonding_show_ad_select, bonding_store_ad_select);
 
 /*
  * Show and set the number of grat ARP to send after a failover event.
@@ -994,14 +981,14 @@ static ssize_t bonding_store_n_grat_arp(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no num_grat_arp value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0 || new_value > 255) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
 		       bond->dev->name, new_value);
 		ret = -EINVAL;
@@ -1012,10 +999,11 @@ static ssize_t bonding_store_n_grat_arp(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR, bonding_show_n_grat_arp, bonding_store_n_grat_arp);
+static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR,
+		   bonding_show_n_grat_arp, bonding_store_n_grat_arp);
 
 /*
- * Show and set the number of unsolicted NA's to send after a failover event.
+ * Show and set the number of unsolicited NA's to send after a failover event.
  */
 static ssize_t bonding_show_n_unsol_na(struct device *d,
 				       struct device_attribute *attr,
@@ -1034,25 +1022,26 @@ static ssize_t bonding_store_n_unsol_na(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no num_unsol_na value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
+
 	if (new_value < 0 || new_value > 255) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
 		       bond->dev->name, new_value);
 		ret = -EINVAL;
 		goto out;
-	} else {
+	} else
 		bond->params.num_unsol_na = new_value;
-	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR, bonding_show_n_unsol_na, bonding_store_n_unsol_na);
+static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR,
+		   bonding_show_n_unsol_na, bonding_store_n_unsol_na);
 
 /*
  * Show and set the MII monitor interval.  There are two tricky bits
@@ -1077,37 +1066,37 @@ static ssize_t bonding_store_miimon(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no miimon value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n",
 		       bond->dev->name, new_value, 1, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	} else {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Setting MII monitoring interval to %d.\n",
 		       bond->dev->name, new_value);
 		bond->params.miimon = new_value;
-		if(bond->params.updelay)
-			printk(KERN_INFO DRV_NAME
+		if (bond->params.updelay)
+			pr_info(DRV_NAME
 			      ": %s: Note: Updating updelay (to %d) "
 			      "since it is a multiple of the miimon value.\n",
 			      bond->dev->name,
 			      bond->params.updelay * bond->params.miimon);
-		if(bond->params.downdelay)
-			printk(KERN_INFO DRV_NAME
+		if (bond->params.downdelay)
+			pr_info(DRV_NAME
 			      ": %s: Note: Updating downdelay (to %d) "
 			      "since it is a multiple of the miimon value.\n",
 			      bond->dev->name,
 			      bond->params.downdelay * bond->params.miimon);
 		if (bond->params.arp_interval) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: MII monitoring cannot be used with "
 			       "ARP monitoring. Disabling ARP monitoring...\n",
 			       bond->dev->name);
@@ -1141,7 +1130,8 @@ static ssize_t bonding_store_miimon(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon);
+static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR,
+		   bonding_show_miimon, bonding_store_miimon);
 
 /*
  * Show and set the primary slave.  The store function is much
@@ -1171,12 +1161,13 @@ static ssize_t bonding_store_primary(struct device *d,
 	struct slave *slave;
 	struct bonding *bond = to_bond(d);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	read_lock(&bond->lock);
 	write_lock_bh(&bond->curr_slave_lock);
 
 	if (!USES_PRIMARY(bond->params.mode)) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Unable to set primary slave; %s is in mode %d\n",
 		       bond->dev->name, bond->dev->name, bond->params.mode);
 	} else {
@@ -1184,7 +1175,7 @@ static ssize_t bonding_store_primary(struct device *d,
 			if (strnicmp
 			    (slave->dev->name, buf,
 			     strlen(slave->dev->name)) == 0) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: Setting %s as primary slave.\n",
 				       bond->dev->name, slave->dev->name);
 				bond->primary_slave = slave;
@@ -1196,13 +1187,13 @@ static ssize_t bonding_store_primary(struct device *d,
 		/* if we got here, then we didn't match the name of any slave */
 
 		if (strlen(buf) == 0 || buf[0] == '\n') {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: Setting primary slave to None.\n",
 			       bond->dev->name);
 			bond->primary_slave = NULL;
 				bond_select_active_slave(bond);
 		} else {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: Unable to set %.*s as primary slave as it is not a slave.\n",
 			       bond->dev->name, (int)strlen(buf) - 1, buf);
 		}
@@ -1214,7 +1205,8 @@ out:
 
 	return count;
 }
-static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary);
+static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR,
+		   bonding_show_primary, bonding_store_primary);
 
 /*
  * Show and set the use_carrier flag.
@@ -1237,7 +1229,7 @@ static ssize_t bonding_store_carrier(struct device *d,
 
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no use_carrier value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
@@ -1245,17 +1237,18 @@ static ssize_t bonding_store_carrier(struct device *d,
 	}
 	if ((new_value == 0) || (new_value == 1)) {
 		bond->params.use_carrier = new_value;
-		printk(KERN_INFO DRV_NAME ": %s: Setting use_carrier to %d.\n",
+		pr_info(DRV_NAME ": %s: Setting use_carrier to %d.\n",
 		       bond->dev->name, new_value);
 	} else {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Ignoring invalid use_carrier value %d.\n",
 		       bond->dev->name, new_value);
 	}
 out:
 	return count;
 }
-static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier);
+static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR,
+		   bonding_show_carrier, bonding_store_carrier);
 
 
 /*
@@ -1284,19 +1277,20 @@ static ssize_t bonding_store_active_slave(struct device *d,
 {
 	int i;
 	struct slave *slave;
-        struct slave *old_active = NULL;
-        struct slave *new_active = NULL;
+	struct slave *old_active = NULL;
+	struct slave *new_active = NULL;
 	struct bonding *bond = to_bond(d);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	read_lock(&bond->lock);
 	write_lock_bh(&bond->curr_slave_lock);
 
-	if (!USES_PRIMARY(bond->params.mode)) {
-		printk(KERN_INFO DRV_NAME
-		       ": %s: Unable to change active slave; %s is in mode %d\n",
-		       bond->dev->name, bond->dev->name, bond->params.mode);
-	} else {
+	if (!USES_PRIMARY(bond->params.mode))
+		pr_info(DRV_NAME ": %s: Unable to change active slave;"
+			" %s is in mode %d\n",
+			bond->dev->name, bond->dev->name, bond->params.mode);
+	else {
 		bond_for_each_slave(bond, slave, i) {
 			if (strnicmp
 			    (slave->dev->name, buf,
@@ -1335,18 +1329,18 @@ static ssize_t bonding_store_active_slave(struct device *d,
 		/* if we got here, then we didn't match the name of any slave */
 
 		if (strlen(buf) == 0 || buf[0] == '\n') {
-			printk(KERN_INFO DRV_NAME
-			       ": %s: Setting active slave to None.\n",
-			       bond->dev->name);
+			pr_info(DRV_NAME
+				": %s: Setting active slave to None.\n",
+				bond->dev->name);
 			bond->primary_slave = NULL;
-				bond_select_active_slave(bond);
+			bond_select_active_slave(bond);
 		} else {
-			printk(KERN_INFO DRV_NAME
-			       ": %s: Unable to set %.*s as active slave as it is not a slave.\n",
-			       bond->dev->name, (int)strlen(buf) - 1, buf);
+			pr_info(DRV_NAME ": %s: Unable to set %.*s"
+				" as active slave as it is not a slave.\n",
+				bond->dev->name, (int)strlen(buf) - 1, buf);
 		}
 	}
-out:
+ out:
 	write_unlock_bh(&bond->curr_slave_lock);
 	read_unlock(&bond->lock);
 	rtnl_unlock();
@@ -1354,7 +1348,8 @@ out:
 	return count;
 
 }
-static DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave);
+static DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR,
+		   bonding_show_active_slave, bonding_store_active_slave);
 
 
 /*
@@ -1371,7 +1366,7 @@ static ssize_t bonding_show_mii_status(struct device *d,
 	curr = bond->curr_active_slave;
 	read_unlock(&bond->curr_slave_lock);
 
-	return sprintf(buf, "%s\n", (curr) ? "up" : "down");
+	return sprintf(buf, "%s\n", curr ? "up" : "down");
 }
 static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
 
@@ -1388,7 +1383,9 @@ static ssize_t bonding_show_ad_aggregator(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0 : ad_info.aggregator_id);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.aggregator_id);
 	}
 
 	return count;
@@ -1408,7 +1405,9 @@ static ssize_t bonding_show_ad_num_ports(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0: ad_info.ports);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.ports);
 	}
 
 	return count;
@@ -1428,7 +1427,9 @@ static ssize_t bonding_show_ad_actor_key(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0 : ad_info.actor_key);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.actor_key);
 	}
 
 	return count;
@@ -1448,7 +1449,9 @@ static ssize_t bonding_show_ad_partner_key(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0 : ad_info.partner_key);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.partner_key);
 	}
 
 	return count;
@@ -1468,9 +1471,8 @@ static ssize_t bonding_show_ad_partner_mac(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		if (!bond_3ad_get_active_agg_info(bond, &ad_info)) {
+		if (!bond_3ad_get_active_agg_info(bond, &ad_info))
 			count = sprintf(buf, "%pM\n", ad_info.partner_system);
-		}
 	}
 
 	return count;
@@ -1538,6 +1540,7 @@ int bond_create_sysfs(void)
 			printk(KERN_ERR
 			       "network device named %s already exists in sysfs",
 			       class_attr_bonding_masters.attr.name);
+		ret = 0;
 	}
 
 	return ret;
@@ -1562,12 +1565,8 @@ int bond_create_sysfs_entry(struct bonding *bond)
 	int err;
 
 	err = sysfs_create_group(&(dev->dev.kobj), &bonding_group);
-	if (err) {
+	if (err)
 		printk(KERN_EMERG "eek! didn't create group!\n");
-	}
-
-	if (expected_refcount < 1)
-		expected_refcount = atomic_read(&bond->dev->dev.kobj.kref.refcount);
 
 	return err;
 }
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index ca849d2adf9..6290a502742 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -286,8 +286,7 @@ static inline unsigned long slave_last_rx(struct bonding *bond,
 static inline void bond_set_slave_inactive_flags(struct slave *slave)
 {
 	struct bonding *bond = netdev_priv(slave->dev->master);
-	if (bond->params.mode != BOND_MODE_TLB &&
-	    bond->params.mode != BOND_MODE_ALB)
+	if (!bond_is_lb(bond))
 		slave->state = BOND_STATE_BACKUP;
 	slave->dev->priv_flags |= IFF_SLAVE_INACTIVE;
 	if (slave_do_arp_validate(bond, slave))
@@ -322,8 +321,7 @@ static inline void bond_unset_master_alb_flags(struct bonding *bond)
 
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
-int bond_create(char *name, struct bond_params *params);
-void bond_destroy(struct bonding *bond);
+int bond_create(const char *name);
 int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_create_sysfs(void);
 void bond_destroy_sysfs(void);
@@ -350,12 +348,8 @@ extern const struct bond_parm_tbl bond_mode_tbl[];
 extern const struct bond_parm_tbl xmit_hashtype_tbl[];
 extern const struct bond_parm_tbl arp_validate_tbl[];
 extern const struct bond_parm_tbl fail_over_mac_tbl[];
-extern struct bond_params bonding_defaults;
 extern struct bond_parm_tbl ad_select_tbl[];
 
-/* exported from bond_sysfs.c */
-extern struct rw_semaphore bonding_rwsem;
-
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 void bond_send_unsolicited_na(struct bonding *bond);
 void bond_register_ipv6_notifier(void);
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 57def0d5737..d5e18812bf4 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -12,6 +12,68 @@ config CAN_VCAN
 	  This driver can also be built as a module.  If so, the module
 	  will be called vcan.
 
+config CAN_DEV
+	tristate "Platform CAN drivers with Netlink support"
+	depends on CAN
+	default Y
+	---help---
+	  Enables the common framework for platform CAN drivers with Netlink
+	  support. This is the standard library for CAN drivers.
+	  If unsure, say Y.
+
+config CAN_CALC_BITTIMING
+	bool "CAN bit-timing calculation"
+	depends on CAN_DEV
+	default Y
+	---help---
+	  If enabled, CAN bit-timing parameters will be calculated for the
+	  bit-rate specified via Netlink argument "bitrate" when the device
+	  get started. This works fine for the most common CAN controllers
+	  with standard bit-rates but may fail for exotic bit-rates or CAN
+	  source clock frequencies. Disabling saves some space, but then the
+	  bit-timing parameters must be specified directly using the Netlink
+	  arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
+	  If unsure, say Y.
+
+config CAN_SJA1000
+	depends on CAN_DEV
+	tristate "Philips SJA1000"
+	---help---
+	  Driver for the SJA1000 CAN controllers from Philips or NXP
+
+config CAN_SJA1000_PLATFORM
+	depends on CAN_SJA1000
+	tristate "Generic Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices).  Which can be found on various
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
+	  PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+	depends on CAN_SJA1000 && PPC_OF
+	tristate "Generic OF Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the OpenFirmware "platform bus" found on embedded systems with
+	  OpenFirmware bindings, e.g. if you have a PowerPC based system
+	  you may want to enable this option.
+
+config CAN_EMS_PCI
+	tristate "EMS CPC-PCI and CPC-PCIe Card"
+	depends on PCI && CAN_SJA1000
+	---help---
+	  This driver is for the one or two channel CPC-PCI and CPC-PCIe
+	  cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	depends on PCI && CAN_SJA1000
+	---help---
+	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+	  4 channel) from Kvaser (http://www.kvaser.com).
+
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index c4bead705cd..523a941b358 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -3,3 +3,10 @@
 #
 
 obj-$(CONFIG_CAN_VCAN)		+= vcan.o
+
+obj-$(CONFIG_CAN_DEV)		+= can-dev.o
+can-dev-y			:= dev.o
+
+obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
new file mode 100644
index 00000000000..574daddc21b
--- /dev/null
+++ b/drivers/net/can/dev.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
+ * Copyright (C) 2006 Andrey Volkov, Varma Electronics
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/netlink.h>
+#include <net/rtnetlink.h>
+
+#define MOD_DESC "CAN device driver interface"
+
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+
+#ifdef CONFIG_CAN_CALC_BITTIMING
+#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */
+
+/*
+ * Bit-timing calculation derived from:
+ *
+ * Code based on LinCAN sources and H8S2638 project
+ * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
+ * Copyright 2005      Stanislav Marek
+ * email: pisa@cmp.felk.cvut.cz
+ *
+ * Calculates proper bit-timing parameters for a specified bit-rate
+ * and sample-point, which can then be used to set the bit-timing
+ * registers of the CAN controller. You can find more information
+ * in the header file linux/can/netlink.h.
+ */
+static int can_update_spt(const struct can_bittiming_const *btc,
+			  int sampl_pt, int tseg, int *tseg1, int *tseg2)
+{
+	*tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000;
+	if (*tseg2 < btc->tseg2_min)
+		*tseg2 = btc->tseg2_min;
+	if (*tseg2 > btc->tseg2_max)
+		*tseg2 = btc->tseg2_max;
+	*tseg1 = tseg - *tseg2;
+	if (*tseg1 > btc->tseg1_max) {
+		*tseg1 = btc->tseg1_max;
+		*tseg2 = tseg - *tseg1;
+	}
+	return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
+}
+
+static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	const struct can_bittiming_const *btc = priv->bittiming_const;
+	long rate, best_rate = 0;
+	long best_error = 1000000000, error = 0;
+	int best_tseg = 0, best_brp = 0, brp = 0;
+	int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0;
+	int spt_error = 1000, spt = 0, sampl_pt;
+	u64 v64;
+
+	if (!priv->bittiming_const)
+		return -ENOTSUPP;
+
+	/* Use CIA recommended sample points */
+	if (bt->sample_point) {
+		sampl_pt = bt->sample_point;
+	} else {
+		if (bt->bitrate > 800000)
+			sampl_pt = 750;
+		else if (bt->bitrate > 500000)
+			sampl_pt = 800;
+		else
+			sampl_pt = 875;
+	}
+
+	/* tseg even = round down, odd = round up */
+	for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
+	     tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
+		tsegall = 1 + tseg / 2;
+		/* Compute all possible tseg choices (tseg=tseg1+tseg2) */
+		brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;
+		/* chose brp step which is possible in system */
+		brp = (brp / btc->brp_inc) * btc->brp_inc;
+		if ((brp < btc->brp_min) || (brp > btc->brp_max))
+			continue;
+		rate = priv->clock.freq / (brp * tsegall);
+		error = bt->bitrate - rate;
+		/* tseg brp biterror */
+		if (error < 0)
+			error = -error;
+		if (error > best_error)
+			continue;
+		best_error = error;
+		if (error == 0) {
+			spt = can_update_spt(btc, sampl_pt, tseg / 2,
+					     &tseg1, &tseg2);
+			error = sampl_pt - spt;
+			if (error < 0)
+				error = -error;
+			if (error > spt_error)
+				continue;
+			spt_error = error;
+		}
+		best_tseg = tseg / 2;
+		best_brp = brp;
+		best_rate = rate;
+		if (error == 0)
+			break;
+	}
+
+	if (best_error) {
+		/* Error in one-tenth of a percent */
+		error = (best_error * 1000) / bt->bitrate;
+		if (error > CAN_CALC_MAX_ERROR) {
+			dev_err(dev->dev.parent,
+				"bitrate error %ld.%ld%% too high\n",
+				error / 10, error % 10);
+			return -EDOM;
+		} else {
+			dev_warn(dev->dev.parent, "bitrate error %ld.%ld%%\n",
+				 error / 10, error % 10);
+		}
+	}
+
+	/* real sample point */
+	bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg,
+					  &tseg1, &tseg2);
+
+	v64 = (u64)best_brp * 1000000000UL;
+	do_div(v64, priv->clock.freq);
+	bt->tq = (u32)v64;
+	bt->prop_seg = tseg1 / 2;
+	bt->phase_seg1 = tseg1 - bt->prop_seg;
+	bt->phase_seg2 = tseg2;
+	bt->sjw = 1;
+	bt->brp = best_brp;
+	/* real bit-rate */
+	bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1));
+
+	return 0;
+}
+#else /* !CONFIG_CAN_CALC_BITTIMING */
+static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	dev_err(dev->dev.parent, "bit-timing calculation not available\n");
+	return -EINVAL;
+}
+#endif /* CONFIG_CAN_CALC_BITTIMING */
+
+/*
+ * Checks the validity of the specified bit-timing parameters prop_seg,
+ * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate
+ * prescaler value brp. You can find more information in the header
+ * file linux/can/netlink.h.
+ */
+static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	const struct can_bittiming_const *btc = priv->bittiming_const;
+	int tseg1, alltseg;
+	u64 brp64;
+
+	if (!priv->bittiming_const)
+		return -ENOTSUPP;
+
+	tseg1 = bt->prop_seg + bt->phase_seg1;
+	if (!bt->sjw)
+		bt->sjw = 1;
+	if (bt->sjw > btc->sjw_max ||
+	    tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max ||
+	    bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max)
+		return -ERANGE;
+
+	brp64 = (u64)priv->clock.freq * (u64)bt->tq;
+	if (btc->brp_inc > 1)
+		do_div(brp64, btc->brp_inc);
+	brp64 += 500000000UL - 1;
+	do_div(brp64, 1000000000UL); /* the practicable BRP */
+	if (btc->brp_inc > 1)
+		brp64 *= btc->brp_inc;
+	bt->brp = (u32)brp64;
+
+	if (bt->brp < btc->brp_min || bt->brp > btc->brp_max)
+		return -EINVAL;
+
+	alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1;
+	bt->bitrate = priv->clock.freq / (bt->brp * alltseg);
+	bt->sample_point = ((tseg1 + 1) * 1000) / alltseg;
+
+	return 0;
+}
+
+int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* Check if the CAN device has bit-timing parameters */
+	if (priv->bittiming_const) {
+
+		/* Non-expert mode? Check if the bitrate has been pre-defined */
+		if (!bt->tq)
+			/* Determine bit-timing parameters */
+			err = can_calc_bittiming(dev, bt);
+		else
+			/* Check bit-timing params and calculate proper brp */
+			err = can_fixup_bittiming(dev, bt);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/*
+ * Local echo of CAN messages
+ *
+ * CAN network devices *should* support a local echo functionality
+ * (see Documentation/networking/can.txt). To test the handling of CAN
+ * interfaces that do not support the local echo both driver types are
+ * implemented. In the case that the driver does not support the echo
+ * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core
+ * to perform the echo as a fallback solution.
+ */
+static void can_flush_echo_skb(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	int i;
+
+	for (i = 0; i < CAN_ECHO_SKB_MAX; i++) {
+		if (priv->echo_skb[i]) {
+			kfree_skb(priv->echo_skb[i]);
+			priv->echo_skb[i] = NULL;
+			stats->tx_dropped++;
+			stats->tx_aborted_errors++;
+		}
+	}
+}
+
+/*
+ * Put the skb on the stack to be looped backed locally lateron
+ *
+ * The function is typically called in the start_xmit function
+ * of the device driver. The driver must protect access to
+ * priv->echo_skb, if necessary.
+ */
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/* check flag whether this packet has to be looped back */
+	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
+		kfree_skb(skb);
+		return;
+	}
+
+	if (!priv->echo_skb[idx]) {
+		struct sock *srcsk = skb->sk;
+
+		if (atomic_read(&skb->users) != 1) {
+			struct sk_buff *old_skb = skb;
+
+			skb = skb_clone(old_skb, GFP_ATOMIC);
+			kfree_skb(old_skb);
+			if (!skb)
+				return;
+		} else
+			skb_orphan(skb);
+
+		skb->sk = srcsk;
+
+		/* make settings for echo to reduce code in irq context */
+		skb->protocol = htons(ETH_P_CAN);
+		skb->pkt_type = PACKET_BROADCAST;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		skb->dev = dev;
+
+		/* save this skb for tx interrupt echo handling */
+		priv->echo_skb[idx] = skb;
+	} else {
+		/* locking problem with netif_stop_queue() ?? */
+		dev_err(dev->dev.parent, "%s: BUG! echo_skb is occupied!\n",
+			__func__);
+		kfree_skb(skb);
+	}
+}
+EXPORT_SYMBOL_GPL(can_put_echo_skb);
+
+/*
+ * Get the skb from the stack and loop it back locally
+ *
+ * The function is typically called when the TX done interrupt
+ * is handled in the device driver. The driver must protect
+ * access to priv->echo_skb, if necessary.
+ */
+void can_get_echo_skb(struct net_device *dev, int idx)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if ((dev->flags & IFF_ECHO) && priv->echo_skb[idx]) {
+		netif_rx(priv->echo_skb[idx]);
+		priv->echo_skb[idx] = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(can_get_echo_skb);
+
+/*
+ * CAN device restart for bus-off recovery
+ */
+void can_restart(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct can_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct sk_buff *skb;
+	struct can_frame *cf;
+	int err;
+
+	BUG_ON(netif_carrier_ok(dev));
+
+	/*
+	 * No synchronization needed because the device is bus-off and
+	 * no messages can come in or go out.
+	 */
+	can_flush_echo_skb(dev);
+
+	/* send restart message upstream */
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (skb == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_CAN);
+	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(cf, 0, sizeof(struct can_frame));
+	cf->can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED;
+	cf->can_dlc = CAN_ERR_DLC;
+
+	netif_rx(skb);
+
+	dev->last_rx = jiffies;
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+
+	dev_dbg(dev->dev.parent, "restarted\n");
+	priv->can_stats.restarts++;
+
+	/* Now restart the device */
+	err = priv->do_set_mode(dev, CAN_MODE_START);
+
+out:
+	netif_carrier_on(dev);
+	if (err)
+		dev_err(dev->dev.parent, "Error %d during restart", err);
+}
+
+int can_restart_now(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/*
+	 * A manual restart is only permitted if automatic restart is
+	 * disabled and the device is in the bus-off state
+	 */
+	if (priv->restart_ms)
+		return -EINVAL;
+	if (priv->state != CAN_STATE_BUS_OFF)
+		return -EBUSY;
+
+	/* Runs as soon as possible in the timer context */
+	mod_timer(&priv->restart_timer, jiffies);
+
+	return 0;
+}
+
+/*
+ * CAN bus-off
+ *
+ * This functions should be called when the device goes bus-off to
+ * tell the netif layer that no more packets can be sent or received.
+ * If enabled, a timer is started to trigger bus-off recovery.
+ */
+void can_bus_off(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	dev_dbg(dev->dev.parent, "bus-off\n");
+
+	netif_carrier_off(dev);
+	priv->can_stats.bus_off++;
+
+	if (priv->restart_ms)
+		mod_timer(&priv->restart_timer,
+			  jiffies + (priv->restart_ms * HZ) / 1000);
+}
+EXPORT_SYMBOL_GPL(can_bus_off);
+
+static void can_setup(struct net_device *dev)
+{
+	dev->type = ARPHRD_CAN;
+	dev->mtu = sizeof(struct can_frame);
+	dev->hard_header_len = 0;
+	dev->addr_len = 0;
+	dev->tx_queue_len = 10;
+
+	/* New-style flags. */
+	dev->flags = IFF_NOARP;
+	dev->features = NETIF_F_NO_CSUM;
+}
+
+/*
+ * Allocate and setup space for the CAN network device
+ */
+struct net_device *alloc_candev(int sizeof_priv)
+{
+	struct net_device *dev;
+	struct can_priv *priv;
+
+	dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+
+	priv->state = CAN_STATE_STOPPED;
+
+	init_timer(&priv->restart_timer);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_candev);
+
+/*
+ * Free space of the CAN network device
+ */
+void free_candev(struct net_device *dev)
+{
+	free_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(free_candev);
+
+/*
+ * Common open function when the device gets opened.
+ *
+ * This function should be called in the open function of the device
+ * driver.
+ */
+int open_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (!priv->bittiming.tq && !priv->bittiming.bitrate) {
+		dev_err(dev->dev.parent, "bit-timing not yet defined\n");
+		return -EINVAL;
+	}
+
+	setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(open_candev);
+
+/*
+ * Common close function for cleanup before the device gets closed.
+ *
+ * This function should be called in the close function of the device
+ * driver.
+ */
+void close_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (del_timer_sync(&priv->restart_timer))
+		dev_put(dev);
+	can_flush_echo_skb(dev);
+}
+EXPORT_SYMBOL_GPL(close_candev);
+
+/*
+ * CAN netlink interface
+ */
+static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
+	[IFLA_CAN_STATE]	= { .type = NLA_U32 },
+	[IFLA_CAN_CTRLMODE]	= { .len = sizeof(struct can_ctrlmode) },
+	[IFLA_CAN_RESTART_MS]	= { .type = NLA_U32 },
+	[IFLA_CAN_RESTART]	= { .type = NLA_U32 },
+	[IFLA_CAN_BITTIMING]	= { .len = sizeof(struct can_bittiming) },
+	[IFLA_CAN_BITTIMING_CONST]
+				= { .len = sizeof(struct can_bittiming_const) },
+	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
+};
+
+static int can_changelink(struct net_device *dev,
+			  struct nlattr *tb[], struct nlattr *data[])
+{
+	struct can_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* We need synchronization with dev->stop() */
+	ASSERT_RTNL();
+
+	if (data[IFLA_CAN_CTRLMODE]) {
+		struct can_ctrlmode *cm;
+
+		/* Do not allow changing controller mode while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+		priv->ctrlmode &= ~cm->mask;
+		priv->ctrlmode |= cm->flags;
+	}
+
+	if (data[IFLA_CAN_BITTIMING]) {
+		struct can_bittiming bt;
+
+		/* Do not allow changing bittiming while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
+		if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq))
+			return -EINVAL;
+		err = can_get_bittiming(dev, &bt);
+		if (err)
+			return err;
+		memcpy(&priv->bittiming, &bt, sizeof(bt));
+
+		if (priv->do_set_bittiming) {
+			/* Finally, set the bit-timing registers */
+			err = priv->do_set_bittiming(dev);
+			if (err)
+				return err;
+		}
+	}
+
+	if (data[IFLA_CAN_RESTART_MS]) {
+		/* Do not allow changing restart delay while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+	}
+
+	if (data[IFLA_CAN_RESTART]) {
+		/* Do not allow a restart while not running */
+		if (!(dev->flags & IFF_UP))
+			return -EINVAL;
+		err = can_restart_now(dev);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	struct can_ctrlmode cm = {.flags = priv->ctrlmode};
+	enum can_state state = priv->state;
+
+	if (priv->do_get_state)
+		priv->do_get_state(dev, &state);
+	NLA_PUT_U32(skb, IFLA_CAN_STATE, state);
+	NLA_PUT(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm);
+	NLA_PUT_U32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms);
+	NLA_PUT(skb, IFLA_CAN_BITTIMING,
+		sizeof(priv->bittiming), &priv->bittiming);
+	NLA_PUT(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock);
+	if (priv->bittiming_const)
+		NLA_PUT(skb, IFLA_CAN_BITTIMING_CONST,
+			sizeof(*priv->bittiming_const), priv->bittiming_const);
+
+	return 0;
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	NLA_PUT(skb, IFLA_INFO_XSTATS,
+		sizeof(priv->can_stats), &priv->can_stats);
+
+	return 0;
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+static struct rtnl_link_ops can_link_ops __read_mostly = {
+	.kind		= "can",
+	.maxtype	= IFLA_CAN_MAX,
+	.policy		= can_policy,
+	.setup		= can_setup,
+	.changelink	= can_changelink,
+	.fill_info	= can_fill_info,
+	.fill_xstats	= can_fill_xstats,
+};
+
+/*
+ * Register the CAN network device
+ */
+int register_candev(struct net_device *dev)
+{
+	dev->rtnl_link_ops = &can_link_ops;
+	return register_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(register_candev);
+
+/*
+ * Unregister the CAN network device
+ */
+void unregister_candev(struct net_device *dev)
+{
+	unregister_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_candev);
+
+static __init int can_dev_init(void)
+{
+	int err;
+
+	err = rtnl_link_register(&can_link_ops);
+	if (!err)
+		printk(KERN_INFO MOD_DESC "\n");
+
+	return err;
+}
+module_init(can_dev_init);
+
+static __exit void can_dev_exit(void)
+{
+	rtnl_link_unregister(&can_link_ops);
+}
+module_exit(can_dev_exit);
+
+MODULE_ALIAS_RTNL_LINK("can");
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
new file mode 100644
index 00000000000..9d0c08da273
--- /dev/null
+++ b/drivers/net/can/sja1000/Makefile
@@ -0,0 +1,11 @@
+#
+#  Makefile for the SJA1000 CAN controller drivers.
+#
+
+obj-$(CONFIG_CAN_SJA1000) += sja1000.o
+obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
+obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
+obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
+obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
new file mode 100644
index 00000000000..121b64101d7
--- /dev/null
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ * Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
+ * Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME  "ems_pci"
+
+MODULE_AUTHOR("Sebastian Haas <haas@ems-wuenche.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe CAN cards");
+MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe CAN card");
+MODULE_LICENSE("GPL v2");
+
+#define EMS_PCI_MAX_CHAN 2
+
+struct ems_pci_card {
+	int channels;
+
+	struct pci_dev *pci_dev;
+	struct net_device *net_dev[EMS_PCI_MAX_CHAN];
+
+	void __iomem *conf_addr;
+	void __iomem *base_addr;
+};
+
+#define EMS_PCI_CAN_CLOCK (16000000 / 2)
+
+/*
+ * Register definitions and descriptions are from LinCAN 0.3.3.
+ *
+ * PSB4610 PITA-2 bridge control registers
+ */
+#define PITA2_ICR           0x00	/* Interrupt Control Register */
+#define PITA2_ICR_INT0      0x00000002	/* [RC] INT0 Active/Clear */
+#define PITA2_ICR_INT0_EN   0x00020000	/* [RW] Enable INT0 */
+
+#define PITA2_MISC          0x1c	/* Miscellaneous Register */
+#define PITA2_MISC_CONFIG   0x04000000	/* Multiplexed parallel interface */
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means  normal output mode , push-pull and the correct polarity.
+ */
+#define EMS_PCI_OCR         (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 7
+ * (meaning direct oscillator output) because the second SJA1000 chip
+ * is driven by the first one CLKOUT output.
+ */
+#define EMS_PCI_CDR             (CDR_CBP | CDR_CLKOUT_MASK)
+#define EMS_PCI_MEM_SIZE        4096  /* Size of the remapped io-memory */
+#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */
+#define EMS_PCI_CAN_CTRL_SIZE   0x200 /* memory size for each controller */
+
+#define EMS_PCI_PORT_BYTES  0x4     /* Each register occupies 4 bytes */
+
+#define EMS_PCI_VENDOR_ID   0x110a  /* PCI device and vendor ID */
+#define EMS_PCI_DEVICE_ID   0x2104
+
+static struct pci_device_id ems_pci_tbl[] = {
+	{EMS_PCI_VENDOR_ID, EMS_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,}
+};
+MODULE_DEVICE_TABLE(pci, ems_pci_tbl);
+
+/*
+ * Helper to read internal registers from card logic (not CAN)
+ */
+static u8 ems_pci_readb(struct ems_pci_card *card, unsigned int port)
+{
+	return readb(card->base_addr + (port * EMS_PCI_PORT_BYTES));
+}
+
+static u8 ems_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return readb(priv->reg_base + (port * EMS_PCI_PORT_BYTES));
+}
+
+static void ems_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
+{
+	writeb(val, priv->reg_base + (port * EMS_PCI_PORT_BYTES));
+}
+
+static void ems_pci_post_irq(const struct sja1000_priv *priv)
+{
+	struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
+
+	/* reset int flag of pita */
+	writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, card->conf_addr
+		+ PITA2_ICR);
+}
+
+/*
+ * Check if a CAN controller is present at the specified location
+ * by trying to set 'em into the PeliCAN mode
+ */
+static inline int ems_pci_check_chan(const struct sja1000_priv *priv)
+{
+	unsigned char res;
+
+	/* Make sure SJA1000 is in reset mode */
+	ems_pci_write_reg(priv, REG_MOD, 1);
+
+	ems_pci_write_reg(priv, REG_CDR, CDR_PELICAN);
+
+	/* read reset-values */
+	res = ems_pci_read_reg(priv, REG_CDR);
+
+	if (res == CDR_PELICAN)
+		return 1;
+
+	return 0;
+}
+
+static void ems_pci_del_card(struct pci_dev *pdev)
+{
+	struct ems_pci_card *card = pci_get_drvdata(pdev);
+	struct net_device *dev;
+	int i = 0;
+
+	for (i = 0; i < card->channels; i++) {
+		dev = card->net_dev[i];
+
+		if (!dev)
+			continue;
+
+		dev_info(&pdev->dev, "Removing %s.\n", dev->name);
+		unregister_sja1000dev(dev);
+		free_sja1000dev(dev);
+	}
+
+	if (card->base_addr != NULL)
+		pci_iounmap(card->pci_dev, card->base_addr);
+
+	if (card->conf_addr != NULL)
+		pci_iounmap(card->pci_dev, card->conf_addr);
+
+	kfree(card);
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static void ems_pci_card_reset(struct ems_pci_card *card)
+{
+	/* Request board reset */
+	writeb(0, card->base_addr);
+}
+
+/*
+ * Probe PCI device for EMS CAN signature and register each available
+ * CAN channel to SJA1000 Socket-CAN subsystem.
+ */
+static int __devinit ems_pci_add_card(struct pci_dev *pdev,
+					const struct pci_device_id *ent)
+{
+	struct sja1000_priv *priv;
+	struct net_device *dev;
+	struct ems_pci_card *card;
+	int err, i;
+
+	/* Enabling PCI device */
+	if (pci_enable_device(pdev) < 0) {
+		dev_err(&pdev->dev, "Enabling PCI device failed\n");
+		return -ENODEV;
+	}
+
+	/* Allocating card structures to hold addresses, ... */
+	card = kzalloc(sizeof(struct ems_pci_card), GFP_KERNEL);
+	if (card == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate memory\n");
+		pci_disable_device(pdev);
+		return -ENOMEM;
+	}
+
+	pci_set_drvdata(pdev, card);
+
+	card->pci_dev = pdev;
+
+	card->channels = 0;
+
+	/* Remap PITA configuration space, and controller memory area */
+	card->conf_addr = pci_iomap(pdev, 0, EMS_PCI_MEM_SIZE);
+	if (card->conf_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_cleanup;
+	}
+
+	card->base_addr = pci_iomap(pdev, 1, EMS_PCI_MEM_SIZE);
+	if (card->base_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_cleanup;
+	}
+
+	/* Configure PITA-2 parallel interface (enable MUX) */
+	writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC);
+
+	/* Check for unique EMS CAN signature */
+	if (ems_pci_readb(card, 0) != 0x55 ||
+	    ems_pci_readb(card, 1) != 0xAA ||
+	    ems_pci_readb(card, 2) != 0x01 ||
+	    ems_pci_readb(card, 3) != 0xCB ||
+	    ems_pci_readb(card, 4) != 0x11) {
+		dev_err(&pdev->dev, "Not EMS Dr. Thomas Wuensche interface\n");
+		err = -ENODEV;
+		goto failure_cleanup;
+	}
+
+	ems_pci_card_reset(card);
+
+	/* Detect available channels */
+	for (i = 0; i < EMS_PCI_MAX_CHAN; i++) {
+		dev = alloc_sja1000dev(0);
+		if (dev == NULL) {
+			err = -ENOMEM;
+			goto failure_cleanup;
+		}
+
+		card->net_dev[i] = dev;
+		priv = netdev_priv(dev);
+		priv->priv = card;
+		priv->irq_flags = IRQF_SHARED;
+
+		dev->irq = pdev->irq;
+		priv->reg_base = card->base_addr + EMS_PCI_CAN_BASE_OFFSET
+					+ (i * EMS_PCI_CAN_CTRL_SIZE);
+
+		/* Check if channel is present */
+		if (ems_pci_check_chan(priv)) {
+			priv->read_reg  = ems_pci_read_reg;
+			priv->write_reg = ems_pci_write_reg;
+			priv->post_irq  = ems_pci_post_irq;
+			priv->can.clock.freq = EMS_PCI_CAN_CLOCK;
+			priv->ocr = EMS_PCI_OCR;
+			priv->cdr = EMS_PCI_CDR;
+
+			SET_NETDEV_DEV(dev, &pdev->dev);
+
+			/* Enable interrupts from card */
+			writel(PITA2_ICR_INT0_EN, card->conf_addr + PITA2_ICR);
+
+			/* Register SJA1000 device */
+			err = register_sja1000dev(dev);
+			if (err) {
+				dev_err(&pdev->dev, "Registering device failed "
+							"(err=%d)\n", err);
+				free_sja1000dev(dev);
+				goto failure_cleanup;
+			}
+
+			card->channels++;
+
+			dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d\n",
+					i + 1, priv->reg_base, dev->irq);
+		} else {
+			free_sja1000dev(dev);
+		}
+	}
+
+	return 0;
+
+failure_cleanup:
+	dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);
+
+	ems_pci_del_card(pdev);
+
+	return err;
+}
+
+static struct pci_driver ems_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = ems_pci_tbl,
+	.probe = ems_pci_add_card,
+	.remove = ems_pci_del_card,
+};
+
+static int __init ems_pci_init(void)
+{
+	return pci_register_driver(&ems_pci_driver);
+}
+
+static void __exit ems_pci_exit(void)
+{
+	pci_unregister_driver(&ems_pci_driver);
+}
+
+module_init(ems_pci_init);
+module_exit(ems_pci_exit);
+
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
new file mode 100644
index 00000000000..7dd7769b971
--- /dev/null
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (C) 2008 Per Dalen <per.dalen@cnw.se>
+ *
+ * Parts of this software are based on (derived) the following:
+ *
+ * - Kvaser linux driver, version 4.72 BETA
+ *   Copyright (C) 2002-2007 KVASER AB
+ *
+ * - Lincan driver, version 0.3.3, OCERA project
+ *   Copyright (C) 2004 Pavel Pisa
+ *   Copyright (C) 2001 Arnaud Westenberg
+ *
+ * - Socketcan SJA1000 drivers
+ *   Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ *   Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ *   Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ *   38106 Braunschweig, GERMANY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME  "kvaser_pci"
+
+MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>");
+MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
+MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
+MODULE_LICENSE("GPL v2");
+
+#define MAX_NO_OF_CHANNELS        4 /* max no of channels on a single card */
+
+struct kvaser_pci {
+	int channel;
+	struct pci_dev *pci_dev;
+	struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1];
+	void __iomem *conf_addr;
+	void __iomem *res_addr;
+	int no_channels;
+	u8 xilinx_ver;
+};
+
+#define KVASER_PCI_CAN_CLOCK      (16000000 / 2)
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means  normal output mode , push-pull and the correct polarity.
+ */
+#define KVASER_PCI_OCR            (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 0
+ * (meaning divide-by-2), the Pelican bit, and the clock-off bit
+ * (you will have no need for CLKOUT anyway).
+ */
+#define KVASER_PCI_CDR            (CDR_CBP | CDR_CLKOUT_MASK)
+
+/*
+ * These register values are valid for revision 14 of the Xilinx logic.
+ */
+#define XILINX_VERINT             7   /* Lower nibble simulate interrupts,
+					 high nibble version number. */
+
+#define XILINX_PRESUMED_VERSION   14
+
+/*
+ * Important S5920 registers
+ */
+#define S5920_INTCSR              0x38
+#define S5920_PTCR                0x60
+#define INTCSR_ADDON_INTENABLE_M  0x2000
+
+
+#define KVASER_PCI_PORT_BYTES     0x20
+
+#define PCI_CONFIG_PORT_SIZE      0x80      /* size of the config io-memory */
+#define PCI_PORT_SIZE             0x80      /* size of a channel io-memory */
+#define PCI_PORT_XILINX_SIZE      0x08      /* size of a xilinx io-memory */
+
+#define KVASER_PCI_VENDOR_ID1     0x10e8    /* the PCI device and vendor IDs */
+#define KVASER_PCI_DEVICE_ID1     0x8406
+
+#define KVASER_PCI_VENDOR_ID2     0x1a07    /* the PCI device and vendor IDs */
+#define KVASER_PCI_DEVICE_ID2     0x0008
+
+static struct pci_device_id kvaser_pci_tbl[] = {
+	{KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
+	{KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
+	{ 0,}
+};
+
+MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl);
+
+static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return ioread8(priv->reg_base + port);
+}
+
+static void kvaser_pci_write_reg(const struct sja1000_priv *priv,
+				 int port, u8 val)
+{
+	iowrite8(val, priv->reg_base + port);
+}
+
+static void kvaser_pci_disable_irq(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct kvaser_pci *board = priv->priv;
+	u32 intcsr;
+
+	/* Disable interrupts from card */
+	intcsr = ioread32(board->conf_addr + S5920_INTCSR);
+	intcsr &= ~INTCSR_ADDON_INTENABLE_M;
+	iowrite32(intcsr, board->conf_addr + S5920_INTCSR);
+}
+
+static void kvaser_pci_enable_irq(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct kvaser_pci *board = priv->priv;
+	u32 tmp_en_io;
+
+	/* Enable interrupts from card */
+	tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR);
+	tmp_en_io |= INTCSR_ADDON_INTENABLE_M;
+	iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR);
+}
+
+static int number_of_sja1000_chip(void __iomem *base_addr)
+{
+	u8 status;
+	int i;
+
+	for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
+		/* reset chip */
+		iowrite8(MOD_RM, base_addr +
+			 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+		status = ioread8(base_addr +
+				 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+		/* check reset bit */
+		if (!(status & MOD_RM))
+			break;
+	}
+
+	return i;
+}
+
+static void kvaser_pci_del_chan(struct net_device *dev)
+{
+	struct sja1000_priv *priv;
+	struct kvaser_pci *board;
+	int i;
+
+	if (!dev)
+		return;
+	priv = netdev_priv(dev);
+	board = priv->priv;
+	if (!board)
+		return;
+
+	dev_info(&board->pci_dev->dev, "Removing device %s\n",
+		 dev->name);
+
+	/* Disable PCI interrupts */
+	kvaser_pci_disable_irq(dev);
+
+	for (i = 0; i < board->no_channels - 1; i++) {
+		if (board->slave_dev[i]) {
+			dev_info(&board->pci_dev->dev, "Removing device %s\n",
+				 board->slave_dev[i]->name);
+			unregister_sja1000dev(board->slave_dev[i]);
+			free_sja1000dev(board->slave_dev[i]);
+		}
+	}
+	unregister_sja1000dev(dev);
+
+	pci_iounmap(board->pci_dev, priv->reg_base);
+	pci_iounmap(board->pci_dev, board->conf_addr);
+	pci_iounmap(board->pci_dev, board->res_addr);
+
+	free_sja1000dev(dev);
+}
+
+static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
+			       struct net_device **master_dev,
+			       void __iomem *conf_addr,
+			       void __iomem *res_addr,
+			       void __iomem *base_addr)
+{
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	struct kvaser_pci *board;
+	int err, init_step;
+
+	dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	priv = netdev_priv(dev);
+	board = priv->priv;
+
+	board->pci_dev = pdev;
+	board->channel = channel;
+
+	/* S5920 */
+	board->conf_addr = conf_addr;
+
+	/* XILINX board wide address */
+	board->res_addr = res_addr;
+
+	if (channel == 0) {
+		board->xilinx_ver =
+			ioread8(board->res_addr + XILINX_VERINT) >> 4;
+		init_step = 2;
+
+		/* Assert PTADR# - we're in passive mode so the other bits are
+		   not important */
+		iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR);
+
+		/* Enable interrupts from card */
+		kvaser_pci_enable_irq(dev);
+	} else {
+		struct sja1000_priv *master_priv = netdev_priv(*master_dev);
+		struct kvaser_pci *master_board = master_priv->priv;
+		master_board->slave_dev[channel - 1] = dev;
+		master_board->no_channels = channel + 1;
+		board->xilinx_ver = master_board->xilinx_ver;
+	}
+
+	priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES;
+
+	priv->read_reg = kvaser_pci_read_reg;
+	priv->write_reg = kvaser_pci_write_reg;
+
+	priv->can.clock.freq = KVASER_PCI_CAN_CLOCK;
+
+	priv->ocr = KVASER_PCI_OCR;
+	priv->cdr = KVASER_PCI_CDR;
+
+	priv->irq_flags = IRQF_SHARED;
+	dev->irq = pdev->irq;
+
+	init_step = 4;
+
+	dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
+		 priv->reg_base, board->conf_addr, dev->irq);
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	/* Register SJA1000 device */
+	err = register_sja1000dev(dev);
+	if (err) {
+		dev_err(&pdev->dev, "Registering device failed (err=%d)\n",
+			err);
+		goto failure;
+	}
+
+	if (channel == 0)
+		*master_dev = dev;
+
+	return 0;
+
+failure:
+	kvaser_pci_del_chan(dev);
+	return err;
+}
+
+static int __devinit kvaser_pci_init_one(struct pci_dev *pdev,
+					 const struct pci_device_id *ent)
+{
+	int err;
+	struct net_device *master_dev = NULL;
+	struct sja1000_priv *priv;
+	struct kvaser_pci *board;
+	int no_channels;
+	void __iomem *base_addr = NULL;
+	void __iomem *conf_addr = NULL;
+	void __iomem *res_addr = NULL;
+	int i;
+
+	dev_info(&pdev->dev, "initializing device %04x:%04x\n",
+		 pdev->vendor, pdev->device);
+
+	err = pci_enable_device(pdev);
+	if (err)
+		goto failure;
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err)
+		goto failure_release_pci;
+
+	/* S5920 */
+	conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE);
+	if (conf_addr == NULL) {
+		err = -ENODEV;
+		goto failure_release_regions;
+	}
+
+	/* XILINX board wide address */
+	res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE);
+	if (res_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_iounmap;
+	}
+
+	base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE);
+	if (base_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_iounmap;
+	}
+
+	no_channels = number_of_sja1000_chip(base_addr);
+	if (no_channels == 0) {
+		err = -ENOMEM;
+		goto failure_iounmap;
+	}
+
+	for (i = 0; i < no_channels; i++) {
+		err = kvaser_pci_add_chan(pdev, i, &master_dev,
+					  conf_addr, res_addr,
+					  base_addr);
+		if (err)
+			goto failure_cleanup;
+	}
+
+	priv = netdev_priv(master_dev);
+	board = priv->priv;
+
+	dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n",
+		 board->xilinx_ver, board->no_channels);
+
+	pci_set_drvdata(pdev, master_dev);
+	return 0;
+
+failure_cleanup:
+	kvaser_pci_del_chan(master_dev);
+
+failure_iounmap:
+	if (conf_addr != NULL)
+		pci_iounmap(pdev, conf_addr);
+	if (res_addr != NULL)
+		pci_iounmap(pdev, res_addr);
+	if (base_addr != NULL)
+		pci_iounmap(pdev, base_addr);
+
+failure_release_regions:
+	pci_release_regions(pdev);
+
+failure_release_pci:
+	pci_disable_device(pdev);
+
+failure:
+	return err;
+
+}
+
+static void __devexit kvaser_pci_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	kvaser_pci_del_chan(dev);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver kvaser_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = kvaser_pci_tbl,
+	.probe = kvaser_pci_init_one,
+	.remove = __devexit_p(kvaser_pci_remove_one),
+};
+
+static int __init kvaser_pci_init(void)
+{
+	return pci_register_driver(&kvaser_pci_driver);
+}
+
+static void __exit kvaser_pci_exit(void)
+{
+	pci_unregister_driver(&kvaser_pci_driver);
+}
+
+module_init(kvaser_pci_init);
+module_exit(kvaser_pci_exit);
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
new file mode 100644
index 00000000000..571f133a8fe
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -0,0 +1,637 @@
+/*
+ * sja1000.c -  Philips SJA1000 network device driver
+ *
+ * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ * 38106 Braunschweig, GERMANY
+ *
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/dev.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000"
+
+MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver");
+
+static struct can_bittiming_const sja1000_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+static int sja1000_probe_chip(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+		printk(KERN_INFO "%s: probing @0x%lX failed\n",
+		       DRV_NAME, dev->base_addr);
+		return 0;
+	}
+	return -1;
+}
+
+static void set_reset_mode(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	unsigned char status = priv->read_reg(priv, REG_MOD);
+	int i;
+
+	/* disable interrupts */
+	priv->write_reg(priv, REG_IER, IRQ_OFF);
+
+	for (i = 0; i < 100; i++) {
+		/* check reset bit */
+		if (status & MOD_RM) {
+			priv->can.state = CAN_STATE_STOPPED;
+			return;
+		}
+
+		priv->write_reg(priv, REG_MOD, MOD_RM);	/* reset chip */
+		udelay(10);
+		status = priv->read_reg(priv, REG_MOD);
+	}
+
+	dev_err(dev->dev.parent, "setting SJA1000 into reset mode failed!\n");
+}
+
+static void set_normal_mode(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	unsigned char status = priv->read_reg(priv, REG_MOD);
+	int i;
+
+	for (i = 0; i < 100; i++) {
+		/* check reset bit */
+		if ((status & MOD_RM) == 0) {
+			priv->can.state = CAN_STATE_ERROR_ACTIVE;
+			/* enable all interrupts */
+			priv->write_reg(priv, REG_IER, IRQ_ALL);
+			return;
+		}
+
+		/* set chip to normal mode */
+		priv->write_reg(priv, REG_MOD, 0x00);
+		udelay(10);
+		status = priv->read_reg(priv, REG_MOD);
+	}
+
+	dev_err(dev->dev.parent, "setting SJA1000 into normal mode failed!\n");
+}
+
+static void sja1000_start(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	/* leave reset mode */
+	if (priv->can.state != CAN_STATE_STOPPED)
+		set_reset_mode(dev);
+
+	/* Clear error counters and error code capture */
+	priv->write_reg(priv, REG_TXERR, 0x0);
+	priv->write_reg(priv, REG_RXERR, 0x0);
+	priv->read_reg(priv, REG_ECC);
+
+	/* leave reset mode */
+	set_normal_mode(dev);
+}
+
+static int sja1000_set_mode(struct net_device *dev, enum can_mode mode)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	if (!priv->open_time)
+		return -EINVAL;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		sja1000_start(dev);
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int sja1000_set_bittiming(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u8 btr0, btr1;
+
+	btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+	btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+		(((bt->phase_seg2 - 1) & 0x7) << 4);
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		btr1 |= 0x80;
+
+	dev_info(dev->dev.parent,
+		 "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1);
+
+	priv->write_reg(priv, REG_BTR0, btr0);
+	priv->write_reg(priv, REG_BTR1, btr1);
+
+	return 0;
+}
+
+/*
+ * initialize SJA1000 chip:
+ *   - reset chip
+ *   - set output mode
+ *   - set baudrate
+ *   - enable interrupts
+ *   - start operating mode
+ */
+static void chipset_init(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	/* set clock divider and output control register */
+	priv->write_reg(priv, REG_CDR, priv->cdr | CDR_PELICAN);
+
+	/* set acceptance filter (accept all) */
+	priv->write_reg(priv, REG_ACCC0, 0x00);
+	priv->write_reg(priv, REG_ACCC1, 0x00);
+	priv->write_reg(priv, REG_ACCC2, 0x00);
+	priv->write_reg(priv, REG_ACCC3, 0x00);
+
+	priv->write_reg(priv, REG_ACCM0, 0xFF);
+	priv->write_reg(priv, REG_ACCM1, 0xFF);
+	priv->write_reg(priv, REG_ACCM2, 0xFF);
+	priv->write_reg(priv, REG_ACCM3, 0xFF);
+
+	priv->write_reg(priv, REG_OCR, priv->ocr | OCR_MODE_NORMAL);
+}
+
+/*
+ * transmit a CAN message
+ * message layout in the sk_buff should be like this:
+ * xx xx xx xx	 ff	 ll   00 11 22 33 44 55 66 77
+ * [  can-id ] [flags] [len] [can data (up to 8 bytes]
+ */
+static int sja1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	uint8_t fi;
+	uint8_t dlc;
+	canid_t id;
+	uint8_t dreg;
+	int i;
+
+	netif_stop_queue(dev);
+
+	fi = dlc = cf->can_dlc;
+	id = cf->can_id;
+
+	if (id & CAN_RTR_FLAG)
+		fi |= FI_RTR;
+
+	if (id & CAN_EFF_FLAG) {
+		fi |= FI_FF;
+		dreg = EFF_BUF;
+		priv->write_reg(priv, REG_FI, fi);
+		priv->write_reg(priv, REG_ID1, (id & 0x1fe00000) >> (5 + 16));
+		priv->write_reg(priv, REG_ID2, (id & 0x001fe000) >> (5 + 8));
+		priv->write_reg(priv, REG_ID3, (id & 0x00001fe0) >> 5);
+		priv->write_reg(priv, REG_ID4, (id & 0x0000001f) << 3);
+	} else {
+		dreg = SFF_BUF;
+		priv->write_reg(priv, REG_FI, fi);
+		priv->write_reg(priv, REG_ID1, (id & 0x000007f8) >> 3);
+		priv->write_reg(priv, REG_ID2, (id & 0x00000007) << 5);
+	}
+
+	for (i = 0; i < dlc; i++)
+		priv->write_reg(priv, dreg++, cf->data[i]);
+
+	stats->tx_bytes += dlc;
+	dev->trans_start = jiffies;
+
+	can_put_echo_skb(skb, dev, 0);
+
+	priv->write_reg(priv, REG_CMR, CMD_TR);
+
+	return 0;
+}
+
+static void sja1000_rx(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	uint8_t fi;
+	uint8_t dreg;
+	canid_t id;
+	uint8_t dlc;
+	int i;
+
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (skb == NULL)
+		return;
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_CAN);
+
+	fi = priv->read_reg(priv, REG_FI);
+	dlc = fi & 0x0F;
+
+	if (fi & FI_FF) {
+		/* extended frame format (EFF) */
+		dreg = EFF_BUF;
+		id = (priv->read_reg(priv, REG_ID1) << (5 + 16))
+		    | (priv->read_reg(priv, REG_ID2) << (5 + 8))
+		    | (priv->read_reg(priv, REG_ID3) << 5)
+		    | (priv->read_reg(priv, REG_ID4) >> 3);
+		id |= CAN_EFF_FLAG;
+	} else {
+		/* standard frame format (SFF) */
+		dreg = SFF_BUF;
+		id = (priv->read_reg(priv, REG_ID1) << 3)
+		    | (priv->read_reg(priv, REG_ID2) >> 5);
+	}
+
+	if (fi & FI_RTR)
+		id |= CAN_RTR_FLAG;
+
+	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(cf, 0, sizeof(struct can_frame));
+	cf->can_id = id;
+	cf->can_dlc = dlc;
+	for (i = 0; i < dlc; i++)
+		cf->data[i] = priv->read_reg(priv, dreg++);
+
+	while (i < 8)
+		cf->data[i++] = 0;
+
+	/* release receive buffer */
+	priv->write_reg(priv, REG_CMR, CMD_RRB);
+
+	netif_rx(skb);
+
+	dev->last_rx = jiffies;
+	stats->rx_packets++;
+	stats->rx_bytes += dlc;
+}
+
+static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	enum can_state state = priv->can.state;
+	uint8_t ecc, alc;
+
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (skb == NULL)
+		return -ENOMEM;
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_CAN);
+	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(cf, 0, sizeof(struct can_frame));
+	cf->can_id = CAN_ERR_FLAG;
+	cf->can_dlc = CAN_ERR_DLC;
+
+	if (isrc & IRQ_DOI) {
+		/* data overrun interrupt */
+		dev_dbg(dev->dev.parent, "data overrun interrupt\n");
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+		priv->write_reg(priv, REG_CMR, CMD_CDO);	/* clear bit */
+	}
+
+	if (isrc & IRQ_EI) {
+		/* error warning interrupt */
+		dev_dbg(dev->dev.parent, "error warning interrupt\n");
+
+		if (status & SR_BS) {
+			state = CAN_STATE_BUS_OFF;
+			cf->can_id |= CAN_ERR_BUSOFF;
+			can_bus_off(dev);
+		} else if (status & SR_ES) {
+			state = CAN_STATE_ERROR_WARNING;
+		} else
+			state = CAN_STATE_ERROR_ACTIVE;
+	}
+	if (isrc & IRQ_BEI) {
+		/* bus error interrupt */
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+
+		ecc = priv->read_reg(priv, REG_ECC);
+
+		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+		switch (ecc & ECC_MASK) {
+		case ECC_BIT:
+			cf->data[2] |= CAN_ERR_PROT_BIT;
+			break;
+		case ECC_FORM:
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+			break;
+		case ECC_STUFF:
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+			break;
+		default:
+			cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+			cf->data[3] = ecc & ECC_SEG;
+			break;
+		}
+		/* Error occured during transmission? */
+		if ((ecc & ECC_DIR) == 0)
+			cf->data[2] |= CAN_ERR_PROT_TX;
+	}
+	if (isrc & IRQ_EPI) {
+		/* error passive interrupt */
+		dev_dbg(dev->dev.parent, "error passive interrupt\n");
+		if (status & SR_ES)
+			state = CAN_STATE_ERROR_PASSIVE;
+		else
+			state = CAN_STATE_ERROR_ACTIVE;
+	}
+	if (isrc & IRQ_ALI) {
+		/* arbitration lost interrupt */
+		dev_dbg(dev->dev.parent, "arbitration lost interrupt\n");
+		alc = priv->read_reg(priv, REG_ALC);
+		priv->can.can_stats.arbitration_lost++;
+		stats->rx_errors++;
+		cf->can_id |= CAN_ERR_LOSTARB;
+		cf->data[0] = alc & 0x1f;
+	}
+
+	if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
+					 state == CAN_STATE_ERROR_PASSIVE)) {
+		uint8_t rxerr = priv->read_reg(priv, REG_RXERR);
+		uint8_t txerr = priv->read_reg(priv, REG_TXERR);
+		cf->can_id |= CAN_ERR_CRTL;
+		if (state == CAN_STATE_ERROR_WARNING) {
+			priv->can.can_stats.error_warning++;
+			cf->data[1] = (txerr > rxerr) ?
+				CAN_ERR_CRTL_TX_WARNING :
+				CAN_ERR_CRTL_RX_WARNING;
+		} else {
+			priv->can.can_stats.error_passive++;
+			cf->data[1] = (txerr > rxerr) ?
+				CAN_ERR_CRTL_TX_PASSIVE :
+				CAN_ERR_CRTL_RX_PASSIVE;
+		}
+	}
+
+	priv->can.state = state;
+
+	netif_rx(skb);
+
+	dev->last_rx = jiffies;
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+
+	return 0;
+}
+
+irqreturn_t sja1000_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	uint8_t isrc, status;
+	int n = 0;
+
+	/* Shared interrupts and IRQ off? */
+	if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
+		return IRQ_NONE;
+
+	if (priv->pre_irq)
+		priv->pre_irq(priv);
+
+	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
+		n++;
+		status = priv->read_reg(priv, REG_SR);
+
+		if (isrc & IRQ_WUI)
+			dev_warn(dev->dev.parent, "wakeup interrupt\n");
+
+		if (isrc & IRQ_TI) {
+			/* transmission complete interrupt */
+			stats->tx_packets++;
+			can_get_echo_skb(dev, 0);
+			netif_wake_queue(dev);
+		}
+		if (isrc & IRQ_RI) {
+			/* receive interrupt */
+			while (status & SR_RBS) {
+				sja1000_rx(dev);
+				status = priv->read_reg(priv, REG_SR);
+			}
+		}
+		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
+			/* error interrupt */
+			if (sja1000_err(dev, isrc, status))
+				break;
+		}
+	}
+
+	if (priv->post_irq)
+		priv->post_irq(priv);
+
+	if (n >= SJA1000_MAX_IRQ)
+		dev_dbg(dev->dev.parent, "%d messages handled in ISR", n);
+
+	return (n) ? IRQ_HANDLED : IRQ_NONE;
+}
+EXPORT_SYMBOL_GPL(sja1000_interrupt);
+
+static int sja1000_open(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* set chip into reset mode */
+	set_reset_mode(dev);
+
+	/* common open */
+	err = open_candev(dev);
+	if (err)
+		return err;
+
+	/* register interrupt handler, if not done by the device driver */
+	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) {
+		err = request_irq(dev->irq, &sja1000_interrupt, priv->irq_flags,
+				  dev->name, (void *)dev);
+		if (err) {
+			close_candev(dev);
+			return -EAGAIN;
+		}
+	}
+
+	/* init and start chi */
+	sja1000_start(dev);
+	priv->open_time = jiffies;
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int sja1000_close(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	set_reset_mode(dev);
+
+	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER))
+		free_irq(dev->irq, (void *)dev);
+
+	close_candev(dev);
+
+	priv->open_time = 0;
+
+	return 0;
+}
+
+struct net_device *alloc_sja1000dev(int sizeof_priv)
+{
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+
+	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+
+	priv->dev = dev;
+	priv->can.bittiming_const = &sja1000_bittiming_const;
+	priv->can.do_set_bittiming = sja1000_set_bittiming;
+	priv->can.do_set_mode = sja1000_set_mode;
+
+	if (sizeof_priv)
+		priv->priv = (void *)priv + sizeof(struct sja1000_priv);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_sja1000dev);
+
+void free_sja1000dev(struct net_device *dev)
+{
+	free_candev(dev);
+}
+EXPORT_SYMBOL_GPL(free_sja1000dev);
+
+static const struct net_device_ops sja1000_netdev_ops = {
+       .ndo_open               = sja1000_open,
+       .ndo_stop               = sja1000_close,
+       .ndo_start_xmit         = sja1000_start_xmit,
+};
+
+int register_sja1000dev(struct net_device *dev)
+{
+	if (!sja1000_probe_chip(dev))
+		return -ENODEV;
+
+	dev->flags |= IFF_ECHO;	/* we support local echo */
+	dev->netdev_ops = &sja1000_netdev_ops;
+
+	set_reset_mode(dev);
+	chipset_init(dev);
+
+	return register_candev(dev);
+}
+EXPORT_SYMBOL_GPL(register_sja1000dev);
+
+void unregister_sja1000dev(struct net_device *dev)
+{
+	set_reset_mode(dev);
+	unregister_candev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_sja1000dev);
+
+static __init int sja1000_init(void)
+{
+	printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME);
+
+	return 0;
+}
+
+module_init(sja1000_init);
+
+static __exit void sja1000_exit(void)
+{
+	printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
+}
+
+module_exit(sja1000_exit);
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
new file mode 100644
index 00000000000..302d2c763ad
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -0,0 +1,181 @@
+/*
+ * sja1000.h -  Philips SJA1000 network device driver
+ *
+ * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ * 38106 Braunschweig, GERMANY
+ *
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#ifndef SJA1000_DEV_H
+#define SJA1000_DEV_H
+
+#include <linux/can/dev.h>
+#include <linux/can/platform/sja1000.h>
+
+#define SJA1000_MAX_IRQ 20	/* max. number of interrupts handled in ISR */
+
+/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
+#define REG_MOD		0x00
+#define REG_CMR		0x01
+#define REG_SR		0x02
+#define REG_IR		0x03
+#define REG_IER		0x04
+#define REG_ALC		0x0B
+#define REG_ECC		0x0C
+#define REG_EWL		0x0D
+#define REG_RXERR	0x0E
+#define REG_TXERR	0x0F
+#define REG_ACCC0	0x10
+#define REG_ACCC1	0x11
+#define REG_ACCC2	0x12
+#define REG_ACCC3	0x13
+#define REG_ACCM0	0x14
+#define REG_ACCM1	0x15
+#define REG_ACCM2	0x16
+#define REG_ACCM3	0x17
+#define REG_RMC		0x1D
+#define REG_RBSA	0x1E
+
+/* Common registers - manual section 6.5 */
+#define REG_BTR0	0x06
+#define REG_BTR1	0x07
+#define REG_OCR		0x08
+#define REG_CDR		0x1F
+
+#define REG_FI		0x10
+#define SFF_BUF		0x13
+#define EFF_BUF		0x15
+
+#define FI_FF		0x80
+#define FI_RTR		0x40
+
+#define REG_ID1		0x11
+#define REG_ID2		0x12
+#define REG_ID3		0x13
+#define REG_ID4		0x14
+
+#define CAN_RAM		0x20
+
+/* mode register */
+#define MOD_RM		0x01
+#define MOD_LOM		0x02
+#define MOD_STM		0x04
+#define MOD_AFM		0x08
+#define MOD_SM		0x10
+
+/* commands */
+#define CMD_SRR		0x10
+#define CMD_CDO		0x08
+#define CMD_RRB		0x04
+#define CMD_AT		0x02
+#define CMD_TR		0x01
+
+/* interrupt sources */
+#define IRQ_BEI		0x80
+#define IRQ_ALI		0x40
+#define IRQ_EPI		0x20
+#define IRQ_WUI		0x10
+#define IRQ_DOI		0x08
+#define IRQ_EI		0x04
+#define IRQ_TI		0x02
+#define IRQ_RI		0x01
+#define IRQ_ALL		0xFF
+#define IRQ_OFF		0x00
+
+/* status register content */
+#define SR_BS		0x80
+#define SR_ES		0x40
+#define SR_TS		0x20
+#define SR_RS		0x10
+#define SR_TCS		0x08
+#define SR_TBS		0x04
+#define SR_DOS		0x02
+#define SR_RBS		0x01
+
+#define SR_CRIT (SR_BS|SR_ES)
+
+/* ECC register */
+#define ECC_SEG		0x1F
+#define ECC_DIR		0x20
+#define ECC_ERR		6
+#define ECC_BIT		0x00
+#define ECC_FORM	0x40
+#define ECC_STUFF	0x80
+#define ECC_MASK	0xc0
+
+/*
+ * Flags for sja1000priv.flags
+ */
+#define SJA1000_CUSTOM_IRQ_HANDLER 0x1
+
+/*
+ * SJA1000 private data structure
+ */
+struct sja1000_priv {
+	struct can_priv can;	/* must be the first member */
+	int open_time;
+	struct sk_buff *echo_skb;
+
+	/* the lower-layer is responsible for appropriate locking */
+	u8 (*read_reg) (const struct sja1000_priv *priv, int reg);
+	void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val);
+	void (*pre_irq) (const struct sja1000_priv *priv);
+	void (*post_irq) (const struct sja1000_priv *priv);
+
+	void *priv;		/* for board-specific data */
+	struct net_device *dev;
+
+	void __iomem *reg_base;	 /* ioremap'ed address to registers */
+	unsigned long irq_flags; /* for request_irq() */
+
+	u16 flags;		/* custom mode flags */
+	u8 ocr;			/* output control register */
+	u8 cdr;			/* clock divider register */
+};
+
+struct net_device *alloc_sja1000dev(int sizeof_priv);
+void free_sja1000dev(struct net_device *dev);
+int register_sja1000dev(struct net_device *dev);
+void unregister_sja1000dev(struct net_device *dev);
+
+irqreturn_t sja1000_interrupt(int irq, void *dev_id);
+
+#endif /* SJA1000_DEV_H */
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
new file mode 100644
index 00000000000..3373560405b
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -0,0 +1,235 @@
+/*
+ * Driver for SJA1000 CAN controllers on the OpenFirmware platform bus
+ *
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* This is a generic driver for SJA1000 chips on the OpenFirmware platform
+ * bus found on embedded PowerPC systems. You need a SJA1000 CAN node
+ * definition in your flattened device tree source (DTS) file similar to:
+ *
+ *   can@3,100 {
+ *           compatible = "nxp,sja1000";
+ *           reg = <3 0x100 0x80>;
+ *           interrupts = <2 0>;
+ *           interrupt-parent = <&mpic>;
+ *           nxp,external-clock-frequency = <16000000>;
+ *   };
+ *
+ * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * information.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000_of_platform"
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the OF platform bus");
+MODULE_LICENSE("GPL v2");
+
+#define SJA1000_OFP_CAN_CLOCK  (16000000 / 2)
+
+#define SJA1000_OFP_OCR        OCR_TX0_PULLDOWN
+#define SJA1000_OFP_CDR        (CDR_CBP | CDR_CLK_OFF)
+
+static u8 sja1000_ofp_read_reg(const struct sja1000_priv *priv, int reg)
+{
+	return in_8(priv->reg_base + reg);
+}
+
+static void sja1000_ofp_write_reg(const struct sja1000_priv *priv,
+				  int reg, u8 val)
+{
+	out_8(priv->reg_base + reg, val);
+}
+
+static int __devexit sja1000_ofp_remove(struct of_device *ofdev)
+{
+	struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct device_node *np = ofdev->node;
+	struct resource res;
+
+	dev_set_drvdata(&ofdev->dev, NULL);
+
+	unregister_sja1000dev(dev);
+	free_sja1000dev(dev);
+	iounmap(priv->reg_base);
+	irq_dispose_mapping(dev->irq);
+
+	of_address_to_resource(np, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+
+	return 0;
+}
+
+static int __devinit sja1000_ofp_probe(struct of_device *ofdev,
+				       const struct of_device_id *id)
+{
+	struct device_node *np = ofdev->node;
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	struct resource res;
+	const u32 *prop;
+	int err, irq, res_size, prop_size;
+	void __iomem *base;
+
+	err = of_address_to_resource(np, 0, &res);
+	if (err) {
+		dev_err(&ofdev->dev, "invalid address\n");
+		return err;
+	}
+
+	res_size = resource_size(&res);
+
+	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
+		dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
+		return -EBUSY;
+	}
+
+	base = ioremap_nocache(res.start, res_size);
+	if (!base) {
+		dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
+		err = -ENOMEM;
+		goto exit_release_mem;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no irq found\n");
+		err = -ENODEV;
+		goto exit_unmap_mem;
+	}
+
+	dev = alloc_sja1000dev(0);
+	if (!dev) {
+		err = -ENOMEM;
+		goto exit_dispose_irq;
+	}
+
+	priv = netdev_priv(dev);
+
+	priv->read_reg = sja1000_ofp_read_reg;
+	priv->write_reg = sja1000_ofp_write_reg;
+
+	prop = of_get_property(np, "nxp,external-clock-frequency", &prop_size);
+	if (prop && (prop_size ==  sizeof(u32)))
+		priv->can.clock.freq = *prop / 2;
+	else
+		priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
+
+	prop = of_get_property(np, "nxp,tx-output-mode", &prop_size);
+	if (prop && (prop_size == sizeof(u32)))
+		priv->ocr |= *prop & OCR_MODE_MASK;
+	else
+		priv->ocr |= OCR_MODE_NORMAL; /* default */
+
+	prop = of_get_property(np, "nxp,tx-output-config", &prop_size);
+	if (prop && (prop_size == sizeof(u32)))
+		priv->ocr |= (*prop << OCR_TX_SHIFT) & OCR_TX_MASK;
+	else
+		priv->ocr |= OCR_TX0_PULLDOWN; /* default */
+
+	prop = of_get_property(np, "nxp,clock-out-frequency", &prop_size);
+	if (prop && (prop_size == sizeof(u32)) && *prop) {
+		u32 divider = priv->can.clock.freq * 2 / *prop;
+
+		if (divider > 1)
+			priv->cdr |= divider / 2 - 1;
+		else
+			priv->cdr |= CDR_CLKOUT_MASK;
+	} else {
+		priv->cdr |= CDR_CLK_OFF; /* default */
+	}
+
+	prop = of_get_property(np, "nxp,no-comparator-bypass", NULL);
+	if (!prop)
+		priv->cdr |= CDR_CBP; /* default */
+
+	priv->irq_flags = IRQF_SHARED;
+	priv->reg_base = base;
+
+	dev->irq = irq;
+
+	dev_info(&ofdev->dev,
+		 "reg_base=0x%p irq=%d clock=%d ocr=0x%02x cdr=0x%02x\n",
+		 priv->reg_base, dev->irq, priv->can.clock.freq,
+		 priv->ocr, priv->cdr);
+
+	dev_set_drvdata(&ofdev->dev, dev);
+	SET_NETDEV_DEV(dev, &ofdev->dev);
+
+	err = register_sja1000dev(dev);
+	if (err) {
+		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
+			DRV_NAME, err);
+		goto exit_free_sja1000;
+	}
+
+	return 0;
+
+exit_free_sja1000:
+	free_sja1000dev(dev);
+exit_dispose_irq:
+	irq_dispose_mapping(irq);
+exit_unmap_mem:
+	iounmap(base);
+exit_release_mem:
+	release_mem_region(res.start, res_size);
+
+	return err;
+}
+
+static struct of_device_id __devinitdata sja1000_ofp_table[] = {
+	{.compatible = "nxp,sja1000"},
+	{},
+};
+
+static struct of_platform_driver sja1000_ofp_driver = {
+	.owner = THIS_MODULE,
+	.name = DRV_NAME,
+	.probe = sja1000_ofp_probe,
+	.remove = __devexit_p(sja1000_ofp_remove),
+	.match_table = sja1000_ofp_table,
+};
+
+static int __init sja1000_ofp_init(void)
+{
+	return of_register_platform_driver(&sja1000_ofp_driver);
+}
+module_init(sja1000_ofp_init);
+
+static void __exit sja1000_ofp_exit(void)
+{
+	return of_unregister_platform_driver(&sja1000_ofp_driver);
+};
+module_exit(sja1000_ofp_exit);
diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
new file mode 100644
index 00000000000..628374c2a05
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2005 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/platform/sja1000.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000_platform"
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
+MODULE_LICENSE("GPL v2");
+
+static u8 sp_read_reg(const struct sja1000_priv *priv, int reg)
+{
+	return ioread8(priv->reg_base + reg);
+}
+
+static void sp_write_reg(const struct sja1000_priv *priv, int reg, u8 val)
+{
+	iowrite8(val, priv->reg_base + reg);
+}
+
+static int sp_probe(struct platform_device *pdev)
+{
+	int err;
+	void __iomem *addr;
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	struct resource *res_mem, *res_irq;
+	struct sja1000_platform_data *pdata;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data provided!\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_mem || !res_irq) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	if (!request_mem_region(res_mem->start, resource_size(res_mem),
+				DRV_NAME)) {
+		err = -EBUSY;
+		goto exit;
+	}
+
+	addr = ioremap_nocache(res_mem->start, resource_size(res_mem));
+	if (!addr) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+
+	dev = alloc_sja1000dev(0);
+	if (!dev) {
+		err = -ENOMEM;
+		goto exit_iounmap;
+	}
+	priv = netdev_priv(dev);
+
+	dev->irq = res_irq->start;
+	priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+	priv->reg_base = addr;
+	priv->read_reg = sp_read_reg;
+	priv->write_reg = sp_write_reg;
+	priv->can.clock.freq = pdata->clock;
+	priv->ocr = pdata->ocr;
+	priv->cdr = pdata->cdr;
+
+	dev_set_drvdata(&pdev->dev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	err = register_sja1000dev(dev);
+	if (err) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			DRV_NAME, err);
+		goto exit_free;
+	}
+
+	dev_info(&pdev->dev, "%s device registered (reg_base=%p, irq=%d)\n",
+		 DRV_NAME, priv->reg_base, dev->irq);
+	return 0;
+
+ exit_free:
+	free_sja1000dev(dev);
+ exit_iounmap:
+	iounmap(addr);
+ exit_release:
+	release_mem_region(res_mem->start, resource_size(res_mem));
+ exit:
+	return err;
+}
+
+static int sp_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = dev_get_drvdata(&pdev->dev);
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct resource *res;
+
+	unregister_sja1000dev(dev);
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	if (priv->reg_base)
+		iounmap(priv->reg_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	free_sja1000dev(dev);
+
+	return 0;
+}
+
+static struct platform_driver sp_driver = {
+	.probe = sp_probe,
+	.remove = sp_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init sp_init(void)
+{
+	return platform_driver_register(&sp_driver);
+}
+
+static void __exit sp_exit(void)
+{
+	platform_driver_unregister(&sp_driver);
+}
+
+module_init(sp_init);
+module_exit(sp_exit);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index f5222764061..eb066673c2a 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -2934,7 +2934,7 @@ static int cas_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 *      individual queues.
 	 */
 	if (cas_xmit_tx_ringN(cp, ring++ & N_TX_RINGS_MASK, skb))
-		return 1;
+		return NETDEV_TX_BUSY;
 	dev->trans_start = jiffies;
 	return 0;
 }
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 4bd2455b0fe..699d22c5fe0 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -46,7 +46,7 @@
 #include <linux/pci.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include <linux/crc32.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h
index 79d855e267e..1f095a9fc73 100644
--- a/drivers/net/chelsio/cphy.h
+++ b/drivers/net/chelsio/cphy.h
@@ -43,10 +43,11 @@
 
 struct mdio_ops {
 	void (*init)(adapter_t *adapter, const struct board_info *bi);
-	int  (*read)(adapter_t *adapter, int phy_addr, int mmd_addr,
-		     int reg_addr, unsigned int *val);
-	int  (*write)(adapter_t *adapter, int phy_addr, int mmd_addr,
-		      int reg_addr, unsigned int val);
+	int  (*read)(struct net_device *dev, int phy_addr, int mmd_addr,
+		     u16 reg_addr);
+	int  (*write)(struct net_device *dev, int phy_addr, int mmd_addr,
+		      u16 reg_addr, u16 val);
+	unsigned mode_support;
 };
 
 /* PHY interrupt types */
@@ -83,11 +84,12 @@ struct cphy_ops {
 	int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex);
 	int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
 			       int *duplex, int *fc);
+
+	u32 mmds;
 };
 
 /* A PHY instance */
 struct cphy {
-	int addr;                            /* PHY address */
 	int state;	/* Link status state machine */
 	adapter_t *adapter;                  /* associated adapter */
 
@@ -101,56 +103,61 @@ struct cphy {
 	u32 elmer_gpo;
 
 	const struct cphy_ops *ops;            /* PHY operations */
-	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int *val);
-	int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr,
-			  int reg_addr, unsigned int val);
+	struct mdio_if_info mdio;
 	struct cphy_instance *instance;
 };
 
 /* Convenience MDIO read/write wrappers */
-static inline int mdio_read(struct cphy *cphy, int mmd, int reg,
-			    unsigned int *valp)
+static inline int cphy_mdio_read(struct cphy *cphy, int mmd, int reg,
+				 unsigned int *valp)
 {
-	return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp);
+	int rc = cphy->mdio.mdio_read(cphy->mdio.dev, cphy->mdio.prtad, mmd,
+				      reg);
+	*valp = (rc >= 0) ? rc : -1;
+	return (rc >= 0) ? 0 : rc;
 }
 
-static inline int mdio_write(struct cphy *cphy, int mmd, int reg,
-			     unsigned int val)
+static inline int cphy_mdio_write(struct cphy *cphy, int mmd, int reg,
+				  unsigned int val)
 {
-	return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val);
+	return cphy->mdio.mdio_write(cphy->mdio.dev, cphy->mdio.prtad, mmd,
+				     reg, val);
 }
 
 static inline int simple_mdio_read(struct cphy *cphy, int reg,
 				   unsigned int *valp)
 {
-	return mdio_read(cphy, 0, reg, valp);
+	return cphy_mdio_read(cphy, MDIO_DEVAD_NONE, reg, valp);
 }
 
 static inline int simple_mdio_write(struct cphy *cphy, int reg,
 				    unsigned int val)
 {
-	return mdio_write(cphy, 0, reg, val);
+	return cphy_mdio_write(cphy, MDIO_DEVAD_NONE, reg, val);
 }
 
 /* Convenience initializer */
-static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
+static inline void cphy_init(struct cphy *phy, struct net_device *dev,
 			     int phy_addr, struct cphy_ops *phy_ops,
 			     const struct mdio_ops *mdio_ops)
 {
+	struct adapter *adapter = netdev_priv(dev);
 	phy->adapter = adapter;
-	phy->addr    = phy_addr;
 	phy->ops     = phy_ops;
 	if (mdio_ops) {
-		phy->mdio_read  = mdio_ops->read;
-		phy->mdio_write = mdio_ops->write;
+		phy->mdio.prtad = phy_addr;
+		phy->mdio.mmds = phy_ops->mmds;
+		phy->mdio.mode_support = mdio_ops->mode_support;
+		phy->mdio.mdio_read = mdio_ops->read;
+		phy->mdio.mdio_write = mdio_ops->write;
 	}
+	phy->mdio.dev = dev;
 }
 
 /* Operations of the PHY-instance factory */
 struct gphy {
 	/* Construct a PHY instance with the given PHY address */
-	struct cphy *(*create)(adapter_t *adapter, int phy_addr,
+	struct cphy *(*create)(struct net_device *dev, int phy_addr,
 			       const struct mdio_ops *mdio_ops);
 
 	/*
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index fa06994f973..082cdb28b51 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -589,7 +589,7 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
-	cmd->phy_address = p->phy->addr;
+	cmd->phy_address = p->phy->mdio.prtad;
 	cmd->transceiver = XCVR_EXTERNAL;
 	cmd->autoneg = p->link_config.autoneg;
 	cmd->maxtxpkt = 0;
@@ -849,39 +849,9 @@ static const struct ethtool_ops t1_ethtool_ops = {
 static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 {
 	struct adapter *adapter = dev->ml_priv;
-	struct mii_ioctl_data *data = if_mii(req);
-
-	switch (cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = adapter->port[dev->if_port].phy->addr;
-		/* FALLTHRU */
-	case SIOCGMIIREG: {
-		struct cphy *phy = adapter->port[dev->if_port].phy;
-		u32 val;
-
-		if (!phy->mdio_read)
-			return -EOPNOTSUPP;
-		phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
-			       &val);
-		data->val_out = val;
-		break;
-	}
-	case SIOCSMIIREG: {
-		struct cphy *phy = adapter->port[dev->if_port].phy;
-
-		if (!capable(CAP_NET_ADMIN))
-		    return -EPERM;
-		if (!phy->mdio_write)
-			return -EOPNOTSUPP;
-		phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
-			        data->val_in);
-		break;
-	}
+	struct mdio_if_info *mdio = &adapter->port[dev->if_port].phy->mdio;
 
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
+	return mdio_mii_ioctl(mdio, if_mii(req), cmd);
 }
 
 static int t1_change_mtu(struct net_device *dev, int new_mtu)
diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/chelsio/mv88e1xxx.c
index 0632be0d649..809047a99e9 100644
--- a/drivers/net/chelsio/mv88e1xxx.c
+++ b/drivers/net/chelsio/mv88e1xxx.c
@@ -353,15 +353,16 @@ static struct cphy_ops mv88e1xxx_ops = {
 	.get_link_status      = mv88e1xxx_get_link_status,
 };
 
-static struct cphy *mv88e1xxx_phy_create(adapter_t *adapter, int phy_addr,
+static struct cphy *mv88e1xxx_phy_create(struct net_device *dev, int phy_addr,
 					 const struct mdio_ops *mdio_ops)
 {
+	struct adapter *adapter = netdev_priv(dev);
 	struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
 
 	if (!cphy)
 		return NULL;
 
-	cphy_init(cphy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops);
+	cphy_init(cphy, dev, phy_addr, &mv88e1xxx_ops, mdio_ops);
 
 	/* Configure particular PHY's to run in a different mode. */
 	if ((board_info(adapter)->caps & SUPPORTED_TP) &&
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
index cd856041af3..f7136b2fd1e 100644
--- a/drivers/net/chelsio/mv88x201x.c
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -53,7 +53,7 @@ static int led_init(struct cphy *cphy)
 	 * Writing these bits maps control to another
 	 * register. mmd(0x1) addr(0x7)
 	 */
-	mdio_write(cphy, 0x3, 0x8304, 0xdddd);
+	cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8304, 0xdddd);
 	return 0;
 }
 
@@ -62,14 +62,14 @@ static int led_link(struct cphy *cphy, u32 do_enable)
 	u32 led = 0;
 #define LINK_ENABLE_BIT 0x1
 
-	mdio_read(cphy, 0x1, 0x7, &led);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, &led);
 
 	if (do_enable & LINK_ENABLE_BIT) {
 		led |= LINK_ENABLE_BIT;
-		mdio_write(cphy, 0x1, 0x7, led);
+		cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
 	} else {
 		led &= ~LINK_ENABLE_BIT;
-		mdio_write(cphy, 0x1, 0x7, led);
+		cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
 	}
 	return 0;
 }
@@ -86,7 +86,8 @@ static int mv88x201x_reset(struct cphy *cphy, int wait)
 static int mv88x201x_interrupt_enable(struct cphy *cphy)
 {
 	/* Enable PHY LASI interrupts. */
-	mdio_write(cphy, 0x1, 0x9002, 0x1);
+	cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			MDIO_PMA_LASI_LSALARM);
 
 	/* Enable Marvell interrupts through Elmer0. */
 	if (t1_is_asic(cphy->adapter)) {
@@ -102,7 +103,7 @@ static int mv88x201x_interrupt_enable(struct cphy *cphy)
 static int mv88x201x_interrupt_disable(struct cphy *cphy)
 {
 	/* Disable PHY LASI interrupts. */
-	mdio_write(cphy, 0x1, 0x9002, 0x0);
+	cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0);
 
 	/* Disable Marvell interrupts through Elmer0. */
 	if (t1_is_asic(cphy->adapter)) {
@@ -122,25 +123,25 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy)
 
 #ifdef MV88x2010_LINK_STATUS_BUGS
 	/* Required to read twice before clear takes affect. */
-	mdio_read(cphy, 0x1, 0x9003, &val);
-	mdio_read(cphy, 0x1, 0x9004, &val);
-	mdio_read(cphy, 0x1, 0x9005, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 
 	/* Read this register after the others above it else
 	 * the register doesn't clear correctly.
 	 */
-	mdio_read(cphy, 0x1, 0x1, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 #endif
 
 	/* Clear link status. */
-	mdio_read(cphy, 0x1, 0x1, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 	/* Clear PHY LASI interrupts. */
-	mdio_read(cphy, 0x1, 0x9005, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 
 #ifdef MV88x2010_LINK_STATUS_BUGS
 	/* Do it again. */
-	mdio_read(cphy, 0x1, 0x9003, &val);
-	mdio_read(cphy, 0x1, 0x9004, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
 #endif
 
 	/* Clear Marvell interrupts through Elmer0. */
@@ -172,13 +173,12 @@ static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
 				     int *speed, int *duplex, int *fc)
 {
 	u32 val = 0;
-#define LINK_STATUS_BIT 0x4
 
 	if (link_ok) {
 		/* Read link status. */
-		mdio_read(cphy, 0x1, 0x1, &val);
-		val &= LINK_STATUS_BIT;
-		*link_ok = (val == LINK_STATUS_BIT);
+		cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+		val &= MDIO_STAT1_LSTATUS;
+		*link_ok = (val == MDIO_STAT1_LSTATUS);
 		/* Turn on/off Link LED */
 		led_link(cphy, *link_ok);
 	}
@@ -205,9 +205,11 @@ static struct cphy_ops mv88x201x_ops = {
 	.interrupt_handler = mv88x201x_interrupt_handler,
 	.get_link_status   = mv88x201x_get_link_status,
 	.set_loopback      = mv88x201x_set_loopback,
+	.mmds              = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+			      MDIO_DEVS_PHYXS | MDIO_DEVS_WIS),
 };
 
-static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
+static struct cphy *mv88x201x_phy_create(struct net_device *dev, int phy_addr,
 					 const struct mdio_ops *mdio_ops)
 {
 	u32 val;
@@ -216,15 +218,15 @@ static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
 	if (!cphy)
 		return NULL;
 
-	cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
+	cphy_init(cphy, dev, phy_addr, &mv88x201x_ops, mdio_ops);
 
 	/* Commands the PHY to enable XFP's clock. */
-	mdio_read(cphy, 0x3, 0x8300, &val);
-	mdio_write(cphy, 0x3, 0x8300, val | 1);
+	cphy_mdio_read(cphy, MDIO_MMD_PCS, 0x8300, &val);
+	cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8300, val | 1);
 
 	/* Clear link status. Required because of a bug in the PHY.  */
-	mdio_read(cphy, 0x1, 0x8, &val);
-	mdio_read(cphy, 0x3, 0x8, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT2, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PCS, MDIO_STAT2, &val);
 
 	/* Allows for Link,Ack LED turn on/off */
 	led_init(cphy);
diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c
index 040acd29995..4c6028512d1 100644
--- a/drivers/net/chelsio/my3126.c
+++ b/drivers/net/chelsio/my3126.c
@@ -43,11 +43,11 @@ static int my3126_interrupt_handler(struct cphy *cphy)
 	adapter = cphy->adapter;
 
 	if (cphy->count == 50) {
-		mdio_read(cphy, 0x1, 0x1, &val);
+		cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 		val16 = (u16) val;
 		status = cphy->bmsr ^ val16;
 
-		if (status & BMSR_LSTATUS)
+		if (status & MDIO_STAT1_LSTATUS)
 			t1_link_changed(adapter, 0);
 		cphy->bmsr = val16;
 
@@ -114,14 +114,14 @@ static int my3126_get_link_status(struct cphy *cphy,
 	adapter_t *adapter;
 
 	adapter = cphy->adapter;
-	mdio_read(cphy, 0x1, 0x1, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 	val16 = (u16) val;
 
 	/* Populate elmer_gpo with the register value */
 	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
 	cphy->elmer_gpo = val;
 
-	*link_ok = (val16 & BMSR_LSTATUS);
+	*link_ok = (val16 & MDIO_STAT1_LSTATUS);
 
 	if (*link_ok) {
 		/* Turn on the LED. */
@@ -163,9 +163,11 @@ static struct cphy_ops my3126_ops = {
 	.interrupt_handler	= my3126_interrupt_handler,
 	.get_link_status	= my3126_get_link_status,
 	.set_loopback		= my3126_set_loopback,
+	.mmds			= (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+				   MDIO_DEVS_PHYXS),
 };
 
-static struct cphy *my3126_phy_create(adapter_t *adapter,
+static struct cphy *my3126_phy_create(struct net_device *dev,
 			int phy_addr, const struct mdio_ops *mdio_ops)
 {
 	struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL);
@@ -173,7 +175,7 @@ static struct cphy *my3126_phy_create(adapter_t *adapter,
 	if (!cphy)
 		return NULL;
 
-	cphy_init(cphy, adapter, phy_addr, &my3126_ops, mdio_ops);
+	cphy_init(cphy, dev, phy_addr, &my3126_ops, mdio_ops);
 	INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
 	cphy->bmsr = 0;
 
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 58f6fc055f6..3711d64e45e 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1149,8 +1149,8 @@ static inline void write_tx_desc(struct cmdQ_e *e, dma_addr_t mapping,
 				 unsigned int len, unsigned int gen,
 				 unsigned int eop)
 {
-	if (unlikely(len > SGE_TX_DESC_MAX_PLEN))
-		BUG();
+	BUG_ON(len > SGE_TX_DESC_MAX_PLEN);
+
 	e->addr_lo = (u32)mapping;
 	e->addr_hi = (u64)mapping >> 32;
 	e->len_gen = V_CMD_LEN(len) | V_CMD_GEN1(gen);
@@ -1879,7 +1879,6 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		cpl->vlan_valid = 0;
 
 send:
-	dev->trans_start = jiffies;
 	ret = t1_sge_tx(skb, adapter, 0, dev);
 
 	/* If transmit busy, and we reallocated skb's due to headroom limit,
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 7adf30230c4..17720c6e5bf 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -284,32 +284,29 @@ static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
 /*
  * Elmer MI1 MDIO read/write operations.
  */
-static int mi1_mdio_read(adapter_t *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int *valp)
+static int mi1_mdio_read(struct net_device *dev, int phy_addr, int mmd_addr,
+			 u16 reg_addr)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
-
-	if (mmd_addr)
-		return -EINVAL;
+	unsigned int val;
 
 	spin_lock(&adapter->tpi_lock);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 	__t1_tpi_write(adapter,
 			A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ);
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
-	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, &val);
 	spin_unlock(&adapter->tpi_lock);
-	return 0;
+	return val;
 }
 
-static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
-			  int reg_addr, unsigned int val)
+static int mi1_mdio_write(struct net_device *dev, int phy_addr, int mmd_addr,
+			  u16 reg_addr, u16 val)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
 
-	if (mmd_addr)
-		return -EINVAL;
-
 	spin_lock(&adapter->tpi_lock);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
@@ -324,16 +321,19 @@ static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 static const struct mdio_ops mi1_mdio_ops = {
 	.init = mi1_mdio_init,
 	.read = mi1_mdio_read,
-	.write = mi1_mdio_write
+	.write = mi1_mdio_write,
+	.mode_support = MDIO_SUPPORTS_C22
 };
 #endif
 
 #endif
 
-static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
-			     int reg_addr, unsigned int *valp)
+static int mi1_mdio_ext_read(struct net_device *dev, int phy_addr, int mmd_addr,
+			     u16 reg_addr)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
+	unsigned int val;
 
 	spin_lock(&adapter->tpi_lock);
 
@@ -350,14 +350,15 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 
 	/* Read the data. */
-	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, &val);
 	spin_unlock(&adapter->tpi_lock);
-	return 0;
+	return val;
 }
 
-static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
-			      int reg_addr, unsigned int val)
+static int mi1_mdio_ext_write(struct net_device *dev, int phy_addr,
+			      int mmd_addr, u16 reg_addr, u16 val)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 
 	spin_lock(&adapter->tpi_lock);
@@ -380,7 +381,8 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 static const struct mdio_ops mi1_mdio_ext_ops = {
 	.init = mi1_mdio_init,
 	.read = mi1_mdio_ext_read,
-	.write = mi1_mdio_ext_write
+	.write = mi1_mdio_ext_write,
+	.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22
 };
 
 enum {
@@ -1133,8 +1135,8 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 		struct cmac *mac;
 		int phy_addr = bi->mdio_phybaseaddr + i;
 
-		adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
-							bi->mdio_ops);
+		adapter->port[i].phy = bi->gphy->create(adapter->port[i].dev,
+							phy_addr, bi->mdio_ops);
 		if (!adapter->port[i].phy) {
 			CH_ERR("%s: PHY %d initialization failed\n",
 			       adapter->name, i);
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
new file mode 100644
index 00000000000..44f77eb1180
--- /dev/null
+++ b/drivers/net/cnic.c
@@ -0,0 +1,2717 @@
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Original skeleton written by: John(Zongxi) Chen (zongxi@broadcom.com)
+ * Modified and maintained by: Michael Chan <mchan@broadcom.com>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/uio_driver.h>
+#include <linux/in.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/module.h>
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN 1
+#endif
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <net/route.h>
+#include <net/ipv6.h>
+#include <net/ip6_route.h>
+#include <scsi/iscsi_if.h>
+
+#include "cnic_if.h"
+#include "bnx2.h"
+#include "cnic.h"
+#include "cnic_defs.h"
+
+#define DRV_MODULE_NAME		"cnic"
+#define PFX DRV_MODULE_NAME	": "
+
+static char version[] __devinitdata =
+	"Broadcom NetXtreme II CNIC Driver " DRV_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
+
+MODULE_AUTHOR("Michael Chan <mchan@broadcom.com> and John(Zongxi) "
+	      "Chen (zongxi@broadcom.com");
+MODULE_DESCRIPTION("Broadcom NetXtreme II CNIC Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CNIC_MODULE_VERSION);
+
+static LIST_HEAD(cnic_dev_list);
+static DEFINE_RWLOCK(cnic_dev_lock);
+static DEFINE_MUTEX(cnic_lock);
+
+static struct cnic_ulp_ops *cnic_ulp_tbl[MAX_CNIC_ULP_TYPE];
+
+static int cnic_service_bnx2(void *, void *);
+static int cnic_ctl(void *, struct cnic_ctl_info *);
+
+static struct cnic_ops cnic_bnx2_ops = {
+	.cnic_owner	= THIS_MODULE,
+	.cnic_handler	= cnic_service_bnx2,
+	.cnic_ctl	= cnic_ctl,
+};
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *);
+static int cnic_cm_set_pg(struct cnic_sock *);
+
+static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode)
+{
+	struct cnic_dev *dev = uinfo->priv;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (cp->uio_dev != -1)
+		return -EBUSY;
+
+	cp->uio_dev = iminor(inode);
+
+	cnic_shutdown_bnx2_rx_ring(dev);
+
+	cnic_init_bnx2_tx_ring(dev);
+	cnic_init_bnx2_rx_ring(dev);
+
+	return 0;
+}
+
+static int cnic_uio_close(struct uio_info *uinfo, struct inode *inode)
+{
+	struct cnic_dev *dev = uinfo->priv;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cp->uio_dev = -1;
+	return 0;
+}
+
+static inline void cnic_hold(struct cnic_dev *dev)
+{
+	atomic_inc(&dev->ref_count);
+}
+
+static inline void cnic_put(struct cnic_dev *dev)
+{
+	atomic_dec(&dev->ref_count);
+}
+
+static inline void csk_hold(struct cnic_sock *csk)
+{
+	atomic_inc(&csk->ref_count);
+}
+
+static inline void csk_put(struct cnic_sock *csk)
+{
+	atomic_dec(&csk->ref_count);
+}
+
+static struct cnic_dev *cnic_from_netdev(struct net_device *netdev)
+{
+	struct cnic_dev *cdev;
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(cdev, &cnic_dev_list, list) {
+		if (netdev == cdev->netdev) {
+			cnic_hold(cdev);
+			read_unlock(&cnic_dev_lock);
+			return cdev;
+		}
+	}
+	read_unlock(&cnic_dev_lock);
+	return NULL;
+}
+
+static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_CTX_WR_CMD;
+	io->cid_addr = cid_addr;
+	io->offset = off;
+	io->data = val;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static void cnic_reg_wr_ind(struct cnic_dev *dev, u32 off, u32 val)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_IO_WR_CMD;
+	io->offset = off;
+	io->data = val;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static u32 cnic_reg_rd_ind(struct cnic_dev *dev, u32 off)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_IO_RD_CMD;
+	io->offset = off;
+	ethdev->drv_ctl(dev->netdev, &info);
+	return io->data;
+}
+
+static int cnic_in_use(struct cnic_sock *csk)
+{
+	return test_bit(SK_F_INUSE, &csk->flags);
+}
+
+static void cnic_kwq_completion(struct cnic_dev *dev, u32 count)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+
+	info.cmd = DRV_CTL_COMPLETION_CMD;
+	info.data.comp.comp_count = count;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
+			   struct cnic_sock *csk)
+{
+	struct iscsi_path path_req;
+	char *buf = NULL;
+	u16 len = 0;
+	u32 msg_type = ISCSI_KEVENT_IF_DOWN;
+	struct cnic_ulp_ops *ulp_ops;
+
+	if (cp->uio_dev == -1)
+		return -ENODEV;
+
+	if (csk) {
+		len = sizeof(path_req);
+		buf = (char *) &path_req;
+		memset(&path_req, 0, len);
+
+		msg_type = ISCSI_KEVENT_PATH_REQ;
+		path_req.handle = (u64) csk->l5_cid;
+		if (test_bit(SK_F_IPV6, &csk->flags)) {
+			memcpy(&path_req.dst.v6_addr, &csk->dst_ip[0],
+			       sizeof(struct in6_addr));
+			path_req.ip_addr_len = 16;
+		} else {
+			memcpy(&path_req.dst.v4_addr, &csk->dst_ip[0],
+			       sizeof(struct in_addr));
+			path_req.ip_addr_len = 4;
+		}
+		path_req.vlan_id = csk->vlan_id;
+		path_req.pmtu = csk->mtu;
+	}
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+	if (ulp_ops)
+		ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
+	rcu_read_unlock();
+	return 0;
+}
+
+static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
+				  char *buf, u16 len)
+{
+	int rc = -EINVAL;
+
+	switch (msg_type) {
+	case ISCSI_UEVENT_PATH_UPDATE: {
+		struct cnic_local *cp;
+		u32 l5_cid;
+		struct cnic_sock *csk;
+		struct iscsi_path *path_resp;
+
+		if (len < sizeof(*path_resp))
+			break;
+
+		path_resp = (struct iscsi_path *) buf;
+		cp = dev->cnic_priv;
+		l5_cid = (u32) path_resp->handle;
+		if (l5_cid >= MAX_CM_SK_TBL_SZ)
+			break;
+
+		csk = &cp->csk_tbl[l5_cid];
+		csk_hold(csk);
+		if (cnic_in_use(csk)) {
+			memcpy(csk->ha, path_resp->mac_addr, 6);
+			if (test_bit(SK_F_IPV6, &csk->flags))
+				memcpy(&csk->src_ip[0], &path_resp->src.v6_addr,
+				       sizeof(struct in6_addr));
+			else
+				memcpy(&csk->src_ip[0], &path_resp->src.v4_addr,
+				       sizeof(struct in_addr));
+			if (is_valid_ether_addr(csk->ha))
+				cnic_cm_set_pg(csk);
+		}
+		csk_put(csk);
+		rc = 0;
+	}
+	}
+
+	return rc;
+}
+
+static int cnic_offld_prep(struct cnic_sock *csk)
+{
+	if (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+		return 0;
+
+	if (!test_bit(SK_F_CONNECT_START, &csk->flags)) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int cnic_close_prep(struct cnic_sock *csk)
+{
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	smp_mb__after_clear_bit();
+
+	if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+		while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+			msleep(1);
+
+		return 1;
+	}
+	return 0;
+}
+
+static int cnic_abort_prep(struct cnic_sock *csk)
+{
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	smp_mb__after_clear_bit();
+
+	while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+		msleep(1);
+
+	if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+		csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+		return 1;
+	}
+
+	return 0;
+}
+
+int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
+{
+	struct cnic_dev *dev;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (cnic_ulp_tbl[ulp_type]) {
+		printk(KERN_ERR PFX "cnic_register_driver: Type %d has already "
+				    "been registered\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EBUSY;
+	}
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		clear_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]);
+	}
+	read_unlock(&cnic_dev_lock);
+
+	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
+	mutex_unlock(&cnic_lock);
+
+	/* Prevent race conditions with netdev_event */
+	rtnl_lock();
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]))
+			ulp_ops->cnic_init(dev);
+	}
+	read_unlock(&cnic_dev_lock);
+	rtnl_unlock();
+
+	return 0;
+}
+
+int cnic_unregister_driver(int ulp_type)
+{
+	struct cnic_dev *dev;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (!cnic_ulp_tbl[ulp_type]) {
+		printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
+				    "been registered\n", ulp_type);
+		goto out_unlock;
+	}
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+			printk(KERN_ERR PFX "cnic_unregister_driver: Type %d "
+			       "still has devices registered\n", ulp_type);
+			read_unlock(&cnic_dev_lock);
+			goto out_unlock;
+		}
+	}
+	read_unlock(&cnic_dev_lock);
+
+	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
+
+	mutex_unlock(&cnic_lock);
+	synchronize_rcu();
+	return 0;
+
+out_unlock:
+	mutex_unlock(&cnic_lock);
+	return -EINVAL;
+}
+
+static int cnic_start_hw(struct cnic_dev *);
+static void cnic_stop_hw(struct cnic_dev *);
+
+static int cnic_register_device(struct cnic_dev *dev, int ulp_type,
+				void *ulp_ctx)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_ulp_ops *ulp_ops;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (cnic_ulp_tbl[ulp_type] == NULL) {
+		printk(KERN_ERR PFX "cnic_register_device: Driver with type %d "
+				    "has not been registered\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EAGAIN;
+	}
+	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+		printk(KERN_ERR PFX "cnic_register_device: Type %d has already "
+		       "been registered to this device\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EBUSY;
+	}
+
+	clear_bit(ULP_F_START, &cp->ulp_flags[ulp_type]);
+	cp->ulp_handle[ulp_type] = ulp_ctx;
+	ulp_ops = cnic_ulp_tbl[ulp_type];
+	rcu_assign_pointer(cp->ulp_ops[ulp_type], ulp_ops);
+	cnic_hold(dev);
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[ulp_type]))
+			ulp_ops->cnic_start(cp->ulp_handle[ulp_type]);
+
+	mutex_unlock(&cnic_lock);
+
+	return 0;
+
+}
+EXPORT_SYMBOL(cnic_register_driver);
+
+static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+		rcu_assign_pointer(cp->ulp_ops[ulp_type], NULL);
+		cnic_put(dev);
+	} else {
+		printk(KERN_ERR PFX "cnic_unregister_device: device not "
+		       "registered to this ulp type %d\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EINVAL;
+	}
+	mutex_unlock(&cnic_lock);
+
+	synchronize_rcu();
+
+	return 0;
+}
+EXPORT_SYMBOL(cnic_unregister_driver);
+
+static int cnic_init_id_tbl(struct cnic_id_tbl *id_tbl, u32 size, u32 start_id)
+{
+	id_tbl->start = start_id;
+	id_tbl->max = size;
+	id_tbl->next = 0;
+	spin_lock_init(&id_tbl->lock);
+	id_tbl->table = kzalloc(DIV_ROUND_UP(size, 32) * 4, GFP_KERNEL);
+	if (!id_tbl->table)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void cnic_free_id_tbl(struct cnic_id_tbl *id_tbl)
+{
+	kfree(id_tbl->table);
+	id_tbl->table = NULL;
+}
+
+static int cnic_alloc_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+	int ret = -1;
+
+	id -= id_tbl->start;
+	if (id >= id_tbl->max)
+		return ret;
+
+	spin_lock(&id_tbl->lock);
+	if (!test_bit(id, id_tbl->table)) {
+		set_bit(id, id_tbl->table);
+		ret = 0;
+	}
+	spin_unlock(&id_tbl->lock);
+	return ret;
+}
+
+/* Returns -1 if not successful */
+static u32 cnic_alloc_new_id(struct cnic_id_tbl *id_tbl)
+{
+	u32 id;
+
+	spin_lock(&id_tbl->lock);
+	id = find_next_zero_bit(id_tbl->table, id_tbl->max, id_tbl->next);
+	if (id >= id_tbl->max) {
+		id = -1;
+		if (id_tbl->next != 0) {
+			id = find_first_zero_bit(id_tbl->table, id_tbl->next);
+			if (id >= id_tbl->next)
+				id = -1;
+		}
+	}
+
+	if (id < id_tbl->max) {
+		set_bit(id, id_tbl->table);
+		id_tbl->next = (id + 1) & (id_tbl->max - 1);
+		id += id_tbl->start;
+	}
+
+	spin_unlock(&id_tbl->lock);
+
+	return id;
+}
+
+static void cnic_free_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+	if (id == -1)
+		return;
+
+	id -= id_tbl->start;
+	if (id >= id_tbl->max)
+		return;
+
+	clear_bit(id, id_tbl->table);
+}
+
+static void cnic_free_dma(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+
+	if (!dma->pg_arr)
+		return;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		if (dma->pg_arr[i]) {
+			pci_free_consistent(dev->pcidev, BCM_PAGE_SIZE,
+					    dma->pg_arr[i], dma->pg_map_arr[i]);
+			dma->pg_arr[i] = NULL;
+		}
+	}
+	if (dma->pgtbl) {
+		pci_free_consistent(dev->pcidev, dma->pgtbl_size,
+				    dma->pgtbl, dma->pgtbl_map);
+		dma->pgtbl = NULL;
+	}
+	kfree(dma->pg_arr);
+	dma->pg_arr = NULL;
+	dma->num_pages = 0;
+}
+
+static void cnic_setup_page_tbl(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+	u32 *page_table = dma->pgtbl;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		/* Each entry needs to be in big endian format. */
+		*page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32);
+		page_table++;
+		*page_table = (u32) dma->pg_map_arr[i];
+		page_table++;
+	}
+}
+
+static int cnic_alloc_dma(struct cnic_dev *dev, struct cnic_dma *dma,
+			  int pages, int use_pg_tbl)
+{
+	int i, size;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	size = pages * (sizeof(void *) + sizeof(dma_addr_t));
+	dma->pg_arr = kzalloc(size, GFP_ATOMIC);
+	if (dma->pg_arr == NULL)
+		return -ENOMEM;
+
+	dma->pg_map_arr = (dma_addr_t *) (dma->pg_arr + pages);
+	dma->num_pages = pages;
+
+	for (i = 0; i < pages; i++) {
+		dma->pg_arr[i] = pci_alloc_consistent(dev->pcidev,
+						      BCM_PAGE_SIZE,
+						      &dma->pg_map_arr[i]);
+		if (dma->pg_arr[i] == NULL)
+			goto error;
+	}
+	if (!use_pg_tbl)
+		return 0;
+
+	dma->pgtbl_size = ((pages * 8) + BCM_PAGE_SIZE - 1) &
+			  ~(BCM_PAGE_SIZE - 1);
+	dma->pgtbl = pci_alloc_consistent(dev->pcidev, dma->pgtbl_size,
+					  &dma->pgtbl_map);
+	if (dma->pgtbl == NULL)
+		goto error;
+
+	cp->setup_pgtbl(dev, dma);
+
+	return 0;
+
+error:
+	cnic_free_dma(dev, dma);
+	return -ENOMEM;
+}
+
+static void cnic_free_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i = 0;
+
+	if (cp->cnic_uinfo) {
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+		while (cp->uio_dev != -1 && i < 15) {
+			msleep(100);
+			i++;
+		}
+		uio_unregister_device(cp->cnic_uinfo);
+		kfree(cp->cnic_uinfo);
+		cp->cnic_uinfo = NULL;
+	}
+
+	if (cp->l2_buf) {
+		pci_free_consistent(dev->pcidev, cp->l2_buf_size,
+				    cp->l2_buf, cp->l2_buf_map);
+		cp->l2_buf = NULL;
+	}
+
+	if (cp->l2_ring) {
+		pci_free_consistent(dev->pcidev, cp->l2_ring_size,
+				    cp->l2_ring, cp->l2_ring_map);
+		cp->l2_ring = NULL;
+	}
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		if (cp->ctx_arr[i].ctx) {
+			pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
+					    cp->ctx_arr[i].ctx,
+					    cp->ctx_arr[i].mapping);
+			cp->ctx_arr[i].ctx = NULL;
+		}
+	}
+	kfree(cp->ctx_arr);
+	cp->ctx_arr = NULL;
+	cp->ctx_blks = 0;
+
+	cnic_free_dma(dev, &cp->gbl_buf_info);
+	cnic_free_dma(dev, &cp->conn_buf_info);
+	cnic_free_dma(dev, &cp->kwq_info);
+	cnic_free_dma(dev, &cp->kcq_info);
+	kfree(cp->iscsi_tbl);
+	cp->iscsi_tbl = NULL;
+	kfree(cp->ctx_tbl);
+	cp->ctx_tbl = NULL;
+
+	cnic_free_id_tbl(&cp->cid_tbl);
+}
+
+static int cnic_alloc_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+		int i, k, arr_size;
+
+		cp->ctx_blk_size = BCM_PAGE_SIZE;
+		cp->cids_per_blk = BCM_PAGE_SIZE / 128;
+		arr_size = BNX2_MAX_CID / cp->cids_per_blk *
+			   sizeof(struct cnic_ctx);
+		cp->ctx_arr = kzalloc(arr_size, GFP_KERNEL);
+		if (cp->ctx_arr == NULL)
+			return -ENOMEM;
+
+		k = 0;
+		for (i = 0; i < 2; i++) {
+			u32 j, reg, off, lo, hi;
+
+			if (i == 0)
+				off = BNX2_PG_CTX_MAP;
+			else
+				off = BNX2_ISCSI_CTX_MAP;
+
+			reg = cnic_reg_rd_ind(dev, off);
+			lo = reg >> 16;
+			hi = reg & 0xffff;
+			for (j = lo; j < hi; j += cp->cids_per_blk, k++)
+				cp->ctx_arr[k].cid = j;
+		}
+
+		cp->ctx_blks = k;
+		if (cp->ctx_blks >= (BNX2_MAX_CID / cp->cids_per_blk)) {
+			cp->ctx_blks = 0;
+			return -ENOMEM;
+		}
+
+		for (i = 0; i < cp->ctx_blks; i++) {
+			cp->ctx_arr[i].ctx =
+				pci_alloc_consistent(dev->pcidev, BCM_PAGE_SIZE,
+						     &cp->ctx_arr[i].mapping);
+			if (cp->ctx_arr[i].ctx == NULL)
+				return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static int cnic_alloc_bnx2_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct uio_info *uinfo;
+	int ret;
+
+	ret = cnic_alloc_dma(dev, &cp->kwq_info, KWQ_PAGE_CNT, 1);
+	if (ret)
+		goto error;
+	cp->kwq = (struct kwqe **) cp->kwq_info.pg_arr;
+
+	ret = cnic_alloc_dma(dev, &cp->kcq_info, KCQ_PAGE_CNT, 1);
+	if (ret)
+		goto error;
+	cp->kcq = (struct kcqe **) cp->kcq_info.pg_arr;
+
+	ret = cnic_alloc_context(dev);
+	if (ret)
+		goto error;
+
+	cp->l2_ring_size = 2 * BCM_PAGE_SIZE;
+	cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
+					   &cp->l2_ring_map);
+	if (!cp->l2_ring)
+		goto error;
+
+	cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
+	cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
+	cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
+					   &cp->l2_buf_map);
+	if (!cp->l2_buf)
+		goto error;
+
+	uinfo = kzalloc(sizeof(*uinfo), GFP_ATOMIC);
+	if (!uinfo)
+		goto error;
+
+	uinfo->mem[0].addr = dev->netdev->base_addr;
+	uinfo->mem[0].internal_addr = dev->regview;
+	uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
+	uinfo->mem[0].memtype = UIO_MEM_PHYS;
+
+	uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
+	if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
+		uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
+	else
+		uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
+	uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->mem[2].addr = (unsigned long) cp->l2_ring;
+	uinfo->mem[2].size = cp->l2_ring_size;
+	uinfo->mem[2].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->mem[3].addr = (unsigned long) cp->l2_buf;
+	uinfo->mem[3].size = cp->l2_buf_size;
+	uinfo->mem[3].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->name = "bnx2_cnic";
+	uinfo->version = CNIC_MODULE_VERSION;
+	uinfo->irq = UIO_IRQ_CUSTOM;
+
+	uinfo->open = cnic_uio_open;
+	uinfo->release = cnic_uio_close;
+
+	uinfo->priv = dev;
+
+	ret = uio_register_device(&dev->pcidev->dev, uinfo);
+	if (ret) {
+		kfree(uinfo);
+		goto error;
+	}
+
+	cp->cnic_uinfo = uinfo;
+
+	return 0;
+
+error:
+	cnic_free_resc(dev);
+	return ret;
+}
+
+static inline u32 cnic_kwq_avail(struct cnic_local *cp)
+{
+	return cp->max_kwq_idx -
+		((cp->kwq_prod_idx - cp->kwq_con_idx) & cp->max_kwq_idx);
+}
+
+static int cnic_submit_bnx2_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+				  u32 num_wqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct kwqe *prod_qe;
+	u16 prod, sw_prod, i;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2 is down */
+
+	spin_lock_bh(&cp->cnic_ulp_lock);
+	if (num_wqes > cnic_kwq_avail(cp) &&
+	    !(cp->cnic_local_flags & CNIC_LCL_FL_KWQ_INIT)) {
+		spin_unlock_bh(&cp->cnic_ulp_lock);
+		return -EAGAIN;
+	}
+
+	cp->cnic_local_flags &= ~CNIC_LCL_FL_KWQ_INIT;
+
+	prod = cp->kwq_prod_idx;
+	sw_prod = prod & MAX_KWQ_IDX;
+	for (i = 0; i < num_wqes; i++) {
+		prod_qe = &cp->kwq[KWQ_PG(sw_prod)][KWQ_IDX(sw_prod)];
+		memcpy(prod_qe, wqes[i], sizeof(struct kwqe));
+		prod++;
+		sw_prod = prod & MAX_KWQ_IDX;
+	}
+	cp->kwq_prod_idx = prod;
+
+	CNIC_WR16(dev, cp->kwq_io_addr, cp->kwq_prod_idx);
+
+	spin_unlock_bh(&cp->cnic_ulp_lock);
+	return 0;
+}
+
+static void service_kcqes(struct cnic_dev *dev, int num_cqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i, j;
+
+	i = 0;
+	j = 1;
+	while (num_cqes) {
+		struct cnic_ulp_ops *ulp_ops;
+		int ulp_type;
+		u32 kcqe_op_flag = cp->completed_kcq[i]->kcqe_op_flag;
+		u32 kcqe_layer = kcqe_op_flag & KCQE_FLAGS_LAYER_MASK;
+
+		if (unlikely(kcqe_op_flag & KCQE_RAMROD_COMPLETION))
+			cnic_kwq_completion(dev, 1);
+
+		while (j < num_cqes) {
+			u32 next_op = cp->completed_kcq[i + j]->kcqe_op_flag;
+
+			if ((next_op & KCQE_FLAGS_LAYER_MASK) != kcqe_layer)
+				break;
+
+			if (unlikely(next_op & KCQE_RAMROD_COMPLETION))
+				cnic_kwq_completion(dev, 1);
+			j++;
+		}
+
+		if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_RDMA)
+			ulp_type = CNIC_ULP_RDMA;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_ISCSI)
+			ulp_type = CNIC_ULP_ISCSI;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L4)
+			ulp_type = CNIC_ULP_L4;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
+			goto end;
+		else {
+			printk(KERN_ERR PFX "%s: Unknown type of KCQE(0x%x)\n",
+			       dev->netdev->name, kcqe_op_flag);
+			goto end;
+		}
+
+		rcu_read_lock();
+		ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+		if (likely(ulp_ops)) {
+			ulp_ops->indicate_kcqes(cp->ulp_handle[ulp_type],
+						  cp->completed_kcq + i, j);
+		}
+		rcu_read_unlock();
+end:
+		num_cqes -= j;
+		i += j;
+		j = 1;
+	}
+	return;
+}
+
+static u16 cnic_bnx2_next_idx(u16 idx)
+{
+	return idx + 1;
+}
+
+static u16 cnic_bnx2_hw_idx(u16 idx)
+{
+	return idx;
+}
+
+static int cnic_get_kcqes(struct cnic_dev *dev, u16 hw_prod, u16 *sw_prod)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 i, ri, last;
+	struct kcqe *kcqe;
+	int kcqe_cnt = 0, last_cnt = 0;
+
+	i = ri = last = *sw_prod;
+	ri &= MAX_KCQ_IDX;
+
+	while ((i != hw_prod) && (kcqe_cnt < MAX_COMPLETED_KCQE)) {
+		kcqe = &cp->kcq[KCQ_PG(ri)][KCQ_IDX(ri)];
+		cp->completed_kcq[kcqe_cnt++] = kcqe;
+		i = cp->next_idx(i);
+		ri = i & MAX_KCQ_IDX;
+		if (likely(!(kcqe->kcqe_op_flag & KCQE_FLAGS_NEXT))) {
+			last_cnt = kcqe_cnt;
+			last = i;
+		}
+	}
+
+	*sw_prod = last;
+	return last_cnt;
+}
+
+static void cnic_chk_bnx2_pkt_rings(struct cnic_local *cp)
+{
+	u16 rx_cons = *cp->rx_cons_ptr;
+	u16 tx_cons = *cp->tx_cons_ptr;
+
+	if (cp->tx_cons != tx_cons || cp->rx_cons != rx_cons) {
+		cp->tx_cons = tx_cons;
+		cp->rx_cons = rx_cons;
+		uio_event_notify(cp->cnic_uinfo);
+	}
+}
+
+static int cnic_service_bnx2(void *data, void *status_blk)
+{
+	struct cnic_dev *dev = data;
+	struct status_block *sblk = status_blk;
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 status_idx = sblk->status_idx;
+	u16 hw_prod, sw_prod;
+	int kcqe_cnt;
+
+	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		return status_idx;
+
+	cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+
+	hw_prod = sblk->status_completion_producer_index;
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that status_blk fields can change. */
+		barrier();
+		if (status_idx != sblk->status_idx) {
+			status_idx = sblk->status_idx;
+			cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+			hw_prod = sblk->status_completion_producer_index;
+		} else
+			break;
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+
+	cp->kcq_prod_idx = sw_prod;
+
+	cnic_chk_bnx2_pkt_rings(cp);
+	return status_idx;
+}
+
+static void cnic_service_bnx2_msix(unsigned long data)
+{
+	struct cnic_dev *dev = (struct cnic_dev *) data;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct status_block_msix *status_blk = cp->bnx2_status_blk;
+	u32 status_idx = status_blk->status_idx;
+	u16 hw_prod, sw_prod;
+	int kcqe_cnt;
+
+	cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+
+	hw_prod = status_blk->status_completion_producer_index;
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that status_blk fields can change. */
+		barrier();
+		if (status_idx != status_blk->status_idx) {
+			status_idx = status_blk->status_idx;
+			cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+			hw_prod = status_blk->status_completion_producer_index;
+		} else
+			break;
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+	cp->kcq_prod_idx = sw_prod;
+
+	cnic_chk_bnx2_pkt_rings(cp);
+
+	cp->last_status_idx = status_idx;
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static irqreturn_t cnic_irq(int irq, void *dev_instance)
+{
+	struct cnic_dev *dev = dev_instance;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
+
+	if (cp->ack_int)
+		cp->ack_int(dev);
+
+	prefetch(cp->status_blk);
+	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+
+	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		tasklet_schedule(&cp->cnic_irq_task);
+
+	return IRQ_HANDLED;
+}
+
+static void cnic_ulp_stop(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	rcu_read_lock();
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+		if (!ulp_ops)
+			continue;
+
+		if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+			ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+	}
+	rcu_read_unlock();
+}
+
+static void cnic_ulp_start(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	rcu_read_lock();
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+		if (!ulp_ops || !ulp_ops->cnic_start)
+			continue;
+
+		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+			ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_ctl(void *data, struct cnic_ctl_info *info)
+{
+	struct cnic_dev *dev = data;
+
+	switch (info->cmd) {
+	case CNIC_CTL_STOP_CMD:
+		cnic_hold(dev);
+		mutex_lock(&cnic_lock);
+
+		cnic_ulp_stop(dev);
+		cnic_stop_hw(dev);
+
+		mutex_unlock(&cnic_lock);
+		cnic_put(dev);
+		break;
+	case CNIC_CTL_START_CMD:
+		cnic_hold(dev);
+		mutex_lock(&cnic_lock);
+
+		if (!cnic_start_hw(dev))
+			cnic_ulp_start(dev);
+
+		mutex_unlock(&cnic_lock);
+		cnic_put(dev);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void cnic_ulp_init(struct cnic_dev *dev)
+{
+	int i;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	rcu_read_lock();
+	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+		if (!ulp_ops || !ulp_ops->cnic_init)
+			continue;
+
+		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+			ulp_ops->cnic_init(dev);
+
+	}
+	rcu_read_unlock();
+}
+
+static void cnic_ulp_exit(struct cnic_dev *dev)
+{
+	int i;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	rcu_read_lock();
+	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+		if (!ulp_ops || !ulp_ops->cnic_exit)
+			continue;
+
+		if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+			ulp_ops->cnic_exit(dev);
+
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_cm_offload_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_offload_pg *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_offload_pg *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_OFFLOAD_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT;
+	l4kwqe->l2hdr_nbytes = ETH_HLEN;
+
+	l4kwqe->da0 = csk->ha[0];
+	l4kwqe->da1 = csk->ha[1];
+	l4kwqe->da2 = csk->ha[2];
+	l4kwqe->da3 = csk->ha[3];
+	l4kwqe->da4 = csk->ha[4];
+	l4kwqe->da5 = csk->ha[5];
+
+	l4kwqe->sa0 = dev->mac_addr[0];
+	l4kwqe->sa1 = dev->mac_addr[1];
+	l4kwqe->sa2 = dev->mac_addr[2];
+	l4kwqe->sa3 = dev->mac_addr[3];
+	l4kwqe->sa4 = dev->mac_addr[4];
+	l4kwqe->sa5 = dev->mac_addr[5];
+
+	l4kwqe->etype = ETH_P_IP;
+	l4kwqe->ipid_count = DEF_IPID_COUNT;
+	l4kwqe->host_opaque = csk->l5_cid;
+
+	if (csk->vlan_id) {
+		l4kwqe->pg_flags |= L4_KWQ_OFFLOAD_PG_VLAN_TAGGING;
+		l4kwqe->vlan_tag = csk->vlan_id;
+		l4kwqe->l2hdr_nbytes += 4;
+	}
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_update_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_update_pg *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_update_pg *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPDATE_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT;
+	l4kwqe->pg_cid = csk->pg_cid;
+
+	l4kwqe->da0 = csk->ha[0];
+	l4kwqe->da1 = csk->ha[1];
+	l4kwqe->da2 = csk->ha[2];
+	l4kwqe->da3 = csk->ha[3];
+	l4kwqe->da4 = csk->ha[4];
+	l4kwqe->da5 = csk->ha[5];
+
+	l4kwqe->pg_host_opaque = csk->l5_cid;
+	l4kwqe->pg_valids = L4_KWQ_UPDATE_PG_VALIDS_DA;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_upload_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_upload *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_upload *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPLOAD_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_UPLOAD_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->pg_cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_conn_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_connect_req1 *l4kwqe1;
+	struct l4_kwq_connect_req2 *l4kwqe2;
+	struct l4_kwq_connect_req3 *l4kwqe3;
+	struct kwqe *wqes[3];
+	u8 tcp_flags = 0;
+	int num_wqes = 2;
+
+	l4kwqe1 = (struct l4_kwq_connect_req1 *) &csk->kwqe1;
+	l4kwqe2 = (struct l4_kwq_connect_req2 *) &csk->kwqe2;
+	l4kwqe3 = (struct l4_kwq_connect_req3 *) &csk->kwqe3;
+	memset(l4kwqe1, 0, sizeof(*l4kwqe1));
+	memset(l4kwqe2, 0, sizeof(*l4kwqe2));
+	memset(l4kwqe3, 0, sizeof(*l4kwqe3));
+
+	l4kwqe3->op_code = L4_KWQE_OPCODE_VALUE_CONNECT3;
+	l4kwqe3->flags =
+		L4_LAYER_CODE << L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT;
+	l4kwqe3->ka_timeout = csk->ka_timeout;
+	l4kwqe3->ka_interval = csk->ka_interval;
+	l4kwqe3->ka_max_probe_count = csk->ka_max_probe_count;
+	l4kwqe3->tos = csk->tos;
+	l4kwqe3->ttl = csk->ttl;
+	l4kwqe3->snd_seq_scale = csk->snd_seq_scale;
+	l4kwqe3->pmtu = csk->mtu;
+	l4kwqe3->rcv_buf = csk->rcv_buf;
+	l4kwqe3->snd_buf = csk->snd_buf;
+	l4kwqe3->seed = csk->seed;
+
+	wqes[0] = (struct kwqe *) l4kwqe1;
+	if (test_bit(SK_F_IPV6, &csk->flags)) {
+		wqes[1] = (struct kwqe *) l4kwqe2;
+		wqes[2] = (struct kwqe *) l4kwqe3;
+		num_wqes = 3;
+
+		l4kwqe1->conn_flags = L4_KWQ_CONNECT_REQ1_IP_V6;
+		l4kwqe2->op_code = L4_KWQE_OPCODE_VALUE_CONNECT2;
+		l4kwqe2->flags =
+			L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT |
+			L4_LAYER_CODE << L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT;
+		l4kwqe2->src_ip_v6_2 = be32_to_cpu(csk->src_ip[1]);
+		l4kwqe2->src_ip_v6_3 = be32_to_cpu(csk->src_ip[2]);
+		l4kwqe2->src_ip_v6_4 = be32_to_cpu(csk->src_ip[3]);
+		l4kwqe2->dst_ip_v6_2 = be32_to_cpu(csk->dst_ip[1]);
+		l4kwqe2->dst_ip_v6_3 = be32_to_cpu(csk->dst_ip[2]);
+		l4kwqe2->dst_ip_v6_4 = be32_to_cpu(csk->dst_ip[3]);
+		l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct ipv6hdr) -
+			       sizeof(struct tcphdr);
+	} else {
+		wqes[1] = (struct kwqe *) l4kwqe3;
+		l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct iphdr) -
+			       sizeof(struct tcphdr);
+	}
+
+	l4kwqe1->op_code = L4_KWQE_OPCODE_VALUE_CONNECT1;
+	l4kwqe1->flags =
+		(L4_LAYER_CODE << L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT) |
+		 L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT;
+	l4kwqe1->cid = csk->cid;
+	l4kwqe1->pg_cid = csk->pg_cid;
+	l4kwqe1->src_ip = be32_to_cpu(csk->src_ip[0]);
+	l4kwqe1->dst_ip = be32_to_cpu(csk->dst_ip[0]);
+	l4kwqe1->src_port = be16_to_cpu(csk->src_port);
+	l4kwqe1->dst_port = be16_to_cpu(csk->dst_port);
+	if (csk->tcp_flags & SK_TCP_NO_DELAY_ACK)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK;
+	if (csk->tcp_flags & SK_TCP_KEEP_ALIVE)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_KEEP_ALIVE;
+	if (csk->tcp_flags & SK_TCP_NAGLE)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE;
+	if (csk->tcp_flags & SK_TCP_TIMESTAMP)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_TIME_STAMP;
+	if (csk->tcp_flags & SK_TCP_SACK)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_SACK;
+	if (csk->tcp_flags & SK_TCP_SEG_SCALING)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_SEG_SCALING;
+
+	l4kwqe1->tcp_flags = tcp_flags;
+
+	return dev->submit_kwqes(dev, wqes, num_wqes);
+}
+
+static int cnic_cm_close_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_close_req *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_close_req *) &csk->kwqe2;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_CLOSE;
+	l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_abort_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_reset_req *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_reset_req *) &csk->kwqe2;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_RESET;
+	l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_create(struct cnic_dev *dev, int ulp_type, u32 cid,
+			  u32 l5_cid, struct cnic_sock **csk, void *context)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_sock *csk1;
+
+	if (l5_cid >= MAX_CM_SK_TBL_SZ)
+		return -EINVAL;
+
+	csk1 = &cp->csk_tbl[l5_cid];
+	if (atomic_read(&csk1->ref_count))
+		return -EAGAIN;
+
+	if (test_and_set_bit(SK_F_INUSE, &csk1->flags))
+		return -EBUSY;
+
+	csk1->dev = dev;
+	csk1->cid = cid;
+	csk1->l5_cid = l5_cid;
+	csk1->ulp_type = ulp_type;
+	csk1->context = context;
+
+	csk1->ka_timeout = DEF_KA_TIMEOUT;
+	csk1->ka_interval = DEF_KA_INTERVAL;
+	csk1->ka_max_probe_count = DEF_KA_MAX_PROBE_COUNT;
+	csk1->tos = DEF_TOS;
+	csk1->ttl = DEF_TTL;
+	csk1->snd_seq_scale = DEF_SND_SEQ_SCALE;
+	csk1->rcv_buf = DEF_RCV_BUF;
+	csk1->snd_buf = DEF_SND_BUF;
+	csk1->seed = DEF_SEED;
+
+	*csk = csk1;
+	return 0;
+}
+
+static void cnic_cm_cleanup(struct cnic_sock *csk)
+{
+	if (csk->src_port) {
+		struct cnic_dev *dev = csk->dev;
+		struct cnic_local *cp = dev->cnic_priv;
+
+		cnic_free_id(&cp->csk_port_tbl, csk->src_port);
+		csk->src_port = 0;
+	}
+}
+
+static void cnic_close_conn(struct cnic_sock *csk)
+{
+	if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags)) {
+		cnic_cm_upload_pg(csk);
+		clear_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+	}
+	cnic_cm_cleanup(csk);
+}
+
+static int cnic_cm_destroy(struct cnic_sock *csk)
+{
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	csk_hold(csk);
+	clear_bit(SK_F_INUSE, &csk->flags);
+	smp_mb__after_clear_bit();
+	while (atomic_read(&csk->ref_count) != 1)
+		msleep(1);
+	cnic_cm_cleanup(csk);
+
+	csk->flags = 0;
+	csk_put(csk);
+	return 0;
+}
+
+static inline u16 cnic_get_vlan(struct net_device *dev,
+				struct net_device **vlan_dev)
+{
+	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+		*vlan_dev = vlan_dev_real_dev(dev);
+		return vlan_dev_vlan_id(dev);
+	}
+	*vlan_dev = dev;
+	return 0;
+}
+
+static int cnic_get_v4_route(struct sockaddr_in *dst_addr,
+			     struct dst_entry **dst)
+{
+#if defined(CONFIG_INET)
+	struct flowi fl;
+	int err;
+	struct rtable *rt;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.nl_u.ip4_u.daddr = dst_addr->sin_addr.s_addr;
+
+	err = ip_route_output_key(&init_net, &rt, &fl);
+	if (!err)
+		*dst = &rt->u.dst;
+	return err;
+#else
+	return -ENETUNREACH;
+#endif
+}
+
+static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
+			     struct dst_entry **dst)
+{
+#if defined(CONFIG_IPV6) || (defined(CONFIG_IPV6_MODULE) && defined(MODULE))
+	struct flowi fl;
+
+	memset(&fl, 0, sizeof(fl));
+	ipv6_addr_copy(&fl.fl6_dst, &dst_addr->sin6_addr);
+	if (ipv6_addr_type(&fl.fl6_dst) & IPV6_ADDR_LINKLOCAL)
+		fl.oif = dst_addr->sin6_scope_id;
+
+	*dst = ip6_route_output(&init_net, NULL, &fl);
+	if (*dst)
+		return 0;
+#endif
+
+	return -ENETUNREACH;
+}
+
+static struct cnic_dev *cnic_cm_select_dev(struct sockaddr_in *dst_addr,
+					   int ulp_type)
+{
+	struct cnic_dev *dev = NULL;
+	struct dst_entry *dst;
+	struct net_device *netdev = NULL;
+	int err = -ENETUNREACH;
+
+	if (dst_addr->sin_family == AF_INET)
+		err = cnic_get_v4_route(dst_addr, &dst);
+	else if (dst_addr->sin_family == AF_INET6) {
+		struct sockaddr_in6 *dst_addr6 =
+			(struct sockaddr_in6 *) dst_addr;
+
+		err = cnic_get_v6_route(dst_addr6, &dst);
+	} else
+		return NULL;
+
+	if (err)
+		return NULL;
+
+	if (!dst->dev)
+		goto done;
+
+	cnic_get_vlan(dst->dev, &netdev);
+
+	dev = cnic_from_netdev(netdev);
+
+done:
+	dst_release(dst);
+	if (dev)
+		cnic_put(dev);
+	return dev;
+}
+
+static int cnic_resolve_addr(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	return cnic_send_nlmsg(cp, ISCSI_KEVENT_PATH_REQ, csk);
+}
+
+static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+	int is_v6, err, rc = -ENETUNREACH;
+	struct dst_entry *dst;
+	struct net_device *realdev;
+	u32 local_port;
+
+	if (saddr->local.v6.sin6_family == AF_INET6 &&
+	    saddr->remote.v6.sin6_family == AF_INET6)
+		is_v6 = 1;
+	else if (saddr->local.v4.sin_family == AF_INET &&
+		 saddr->remote.v4.sin_family == AF_INET)
+		is_v6 = 0;
+	else
+		return -EINVAL;
+
+	clear_bit(SK_F_IPV6, &csk->flags);
+
+	if (is_v6) {
+#if defined(CONFIG_IPV6) || (defined(CONFIG_IPV6_MODULE) && defined(MODULE))
+		set_bit(SK_F_IPV6, &csk->flags);
+		err = cnic_get_v6_route(&saddr->remote.v6, &dst);
+		if (err)
+			return err;
+
+		if (!dst || dst->error || !dst->dev)
+			goto err_out;
+
+		memcpy(&csk->dst_ip[0], &saddr->remote.v6.sin6_addr,
+		       sizeof(struct in6_addr));
+		csk->dst_port = saddr->remote.v6.sin6_port;
+		local_port = saddr->local.v6.sin6_port;
+#else
+		return rc;
+#endif
+
+	} else {
+		err = cnic_get_v4_route(&saddr->remote.v4, &dst);
+		if (err)
+			return err;
+
+		if (!dst || dst->error || !dst->dev)
+			goto err_out;
+
+		csk->dst_ip[0] = saddr->remote.v4.sin_addr.s_addr;
+		csk->dst_port = saddr->remote.v4.sin_port;
+		local_port = saddr->local.v4.sin_port;
+	}
+
+	csk->vlan_id = cnic_get_vlan(dst->dev, &realdev);
+	if (realdev != dev->netdev)
+		goto err_out;
+
+	if (local_port >= CNIC_LOCAL_PORT_MIN &&
+	    local_port < CNIC_LOCAL_PORT_MAX) {
+		if (cnic_alloc_id(&cp->csk_port_tbl, local_port))
+			local_port = 0;
+	} else
+		local_port = 0;
+
+	if (!local_port) {
+		local_port = cnic_alloc_new_id(&cp->csk_port_tbl);
+		if (local_port == -1) {
+			rc = -ENOMEM;
+			goto err_out;
+		}
+	}
+	csk->src_port = local_port;
+
+	csk->mtu = dst_mtu(dst);
+	rc = 0;
+
+err_out:
+	dst_release(dst);
+	return rc;
+}
+
+static void cnic_init_csk_state(struct cnic_sock *csk)
+{
+	csk->state = 0;
+	clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+	clear_bit(SK_F_CLOSING, &csk->flags);
+}
+
+static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	int err = 0;
+
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (test_and_set_bit(SK_F_CONNECT_START, &csk->flags))
+		return -EINVAL;
+
+	cnic_init_csk_state(csk);
+
+	err = cnic_get_route(csk, saddr);
+	if (err)
+		goto err_out;
+
+	err = cnic_resolve_addr(csk, saddr);
+	if (!err)
+		return 0;
+
+err_out:
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	return err;
+}
+
+static int cnic_cm_abort(struct cnic_sock *csk)
+{
+	struct cnic_local *cp = csk->dev->cnic_priv;
+	u32 opcode;
+
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (cnic_abort_prep(csk))
+		return cnic_cm_abort_req(csk);
+
+	/* Getting here means that we haven't started connect, or
+	 * connect was not successful.
+	 */
+
+	csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+	if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+		opcode = csk->state;
+	else
+		opcode = L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD;
+	cp->close_conn(csk, opcode);
+
+	return 0;
+}
+
+static int cnic_cm_close(struct cnic_sock *csk)
+{
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (cnic_close_prep(csk)) {
+		csk->state = L4_KCQE_OPCODE_VALUE_CLOSE_COMP;
+		return cnic_cm_close_req(csk);
+	}
+	return 0;
+}
+
+static void cnic_cm_upcall(struct cnic_local *cp, struct cnic_sock *csk,
+			   u8 opcode)
+{
+	struct cnic_ulp_ops *ulp_ops;
+	int ulp_type = csk->ulp_type;
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+	if (ulp_ops) {
+		if (opcode == L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE)
+			ulp_ops->cm_connect_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)
+			ulp_ops->cm_close_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED)
+			ulp_ops->cm_remote_abort(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_COMP)
+			ulp_ops->cm_abort_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED)
+			ulp_ops->cm_remote_close(csk);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_cm_set_pg(struct cnic_sock *csk)
+{
+	if (cnic_offld_prep(csk)) {
+		if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+			cnic_cm_update_pg(csk);
+		else
+			cnic_cm_offload_pg(csk);
+	}
+	return 0;
+}
+
+static void cnic_cm_process_offld_pg(struct cnic_dev *dev, struct l4_kcq *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 l5_cid = kcqe->pg_host_opaque;
+	u8 opcode = kcqe->op_code;
+	struct cnic_sock *csk = &cp->csk_tbl[l5_cid];
+
+	csk_hold(csk);
+	if (!cnic_in_use(csk))
+		goto done;
+
+	if (opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		goto done;
+	}
+	csk->pg_cid = kcqe->pg_cid;
+	set_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+	cnic_cm_conn_req(csk);
+
+done:
+	csk_put(csk);
+}
+
+static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l4_kcq *l4kcqe = (struct l4_kcq *) kcqe;
+	u8 opcode = l4kcqe->op_code;
+	u32 l5_cid;
+	struct cnic_sock *csk;
+
+	if (opcode == L4_KCQE_OPCODE_VALUE_OFFLOAD_PG ||
+	    opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+		cnic_cm_process_offld_pg(dev, l4kcqe);
+		return;
+	}
+
+	l5_cid = l4kcqe->conn_id;
+	if (opcode & 0x80)
+		l5_cid = l4kcqe->cid;
+	if (l5_cid >= MAX_CM_SK_TBL_SZ)
+		return;
+
+	csk = &cp->csk_tbl[l5_cid];
+	csk_hold(csk);
+
+	if (!cnic_in_use(csk)) {
+		csk_put(csk);
+		return;
+	}
+
+	switch (opcode) {
+	case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE:
+		if (l4kcqe->status == 0)
+			set_bit(SK_F_OFFLD_COMPLETE, &csk->flags);
+
+		smp_mb__before_clear_bit();
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		cnic_cm_upcall(cp, csk, opcode);
+		break;
+
+	case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
+		if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags))
+			csk->state = opcode;
+		/* fall through */
+	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
+	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+		cp->close_conn(csk, opcode);
+		break;
+
+	case L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED:
+		cnic_cm_upcall(cp, csk, opcode);
+		break;
+	}
+	csk_put(csk);
+}
+
+static void cnic_cm_indicate_kcqe(void *data, struct kcqe *kcqe[], u32 num)
+{
+	struct cnic_dev *dev = data;
+	int i;
+
+	for (i = 0; i < num; i++)
+		cnic_cm_process_kcqe(dev, kcqe[i]);
+}
+
+static struct cnic_ulp_ops cm_ulp_ops = {
+	.indicate_kcqes		= cnic_cm_indicate_kcqe,
+};
+
+static void cnic_cm_free_mem(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	kfree(cp->csk_tbl);
+	cp->csk_tbl = NULL;
+	cnic_free_id_tbl(&cp->csk_port_tbl);
+}
+
+static int cnic_cm_alloc_mem(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cp->csk_tbl = kzalloc(sizeof(struct cnic_sock) * MAX_CM_SK_TBL_SZ,
+			      GFP_KERNEL);
+	if (!cp->csk_tbl)
+		return -ENOMEM;
+
+	if (cnic_init_id_tbl(&cp->csk_port_tbl, CNIC_LOCAL_PORT_RANGE,
+			     CNIC_LOCAL_PORT_MIN)) {
+		cnic_cm_free_mem(dev);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int cnic_ready_to_close(struct cnic_sock *csk, u32 opcode)
+{
+	if ((opcode == csk->state) ||
+	    (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED &&
+	     csk->state == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)) {
+		if (!test_and_set_bit(SK_F_CLOSING, &csk->flags))
+			return 1;
+	}
+	return 0;
+}
+
+static void cnic_close_bnx2_conn(struct cnic_sock *csk, u32 opcode)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	if (cnic_ready_to_close(csk, opcode)) {
+		cnic_close_conn(csk);
+		cnic_cm_upcall(cp, csk, opcode);
+	}
+}
+
+static void cnic_cm_stop_bnx2_hw(struct cnic_dev *dev)
+{
+}
+
+static int cnic_cm_init_bnx2_hw(struct cnic_dev *dev)
+{
+	u32 seed;
+
+	get_random_bytes(&seed, 4);
+	cnic_ctx_wr(dev, 45, 0, seed);
+	return 0;
+}
+
+static int cnic_cm_open(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int err;
+
+	err = cnic_cm_alloc_mem(dev);
+	if (err)
+		return err;
+
+	err = cp->start_cm(dev);
+
+	if (err)
+		goto err_out;
+
+	dev->cm_create = cnic_cm_create;
+	dev->cm_destroy = cnic_cm_destroy;
+	dev->cm_connect = cnic_cm_connect;
+	dev->cm_abort = cnic_cm_abort;
+	dev->cm_close = cnic_cm_close;
+	dev->cm_select_dev = cnic_cm_select_dev;
+
+	cp->ulp_handle[CNIC_ULP_L4] = dev;
+	rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], &cm_ulp_ops);
+	return 0;
+
+err_out:
+	cnic_cm_free_mem(dev);
+	return err;
+}
+
+static int cnic_cm_shutdown(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i;
+
+	cp->stop_cm(dev);
+
+	if (!cp->csk_tbl)
+		return 0;
+
+	for (i = 0; i < MAX_CM_SK_TBL_SZ; i++) {
+		struct cnic_sock *csk = &cp->csk_tbl[i];
+
+		clear_bit(SK_F_INUSE, &csk->flags);
+		cnic_cm_cleanup(csk);
+	}
+	cnic_cm_free_mem(dev);
+
+	return 0;
+}
+
+static void cnic_init_context(struct cnic_dev *dev, u32 cid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 cid_addr;
+	int i;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5709)
+		return;
+
+	cid_addr = GET_CID_ADDR(cid);
+
+	for (i = 0; i < CTX_SIZE; i += 4)
+		cnic_ctx_wr(dev, cid_addr, i, 0);
+}
+
+static int cnic_setup_5709_context(struct cnic_dev *dev, int valid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int ret = 0, i;
+	u32 valid_bit = valid ? BNX2_CTX_HOST_PAGE_TBL_DATA0_VALID : 0;
+
+	if (CHIP_NUM(cp) != CHIP_NUM_5709)
+		return 0;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		int j;
+		u32 idx = cp->ctx_arr[i].cid / cp->cids_per_blk;
+		u32 val;
+
+		memset(cp->ctx_arr[i].ctx, 0, BCM_PAGE_SIZE);
+
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA0,
+			(cp->ctx_arr[i].mapping & 0xffffffff) | valid_bit);
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA1,
+			(u64) cp->ctx_arr[i].mapping >> 32);
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL, idx |
+			BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ);
+		for (j = 0; j < 10; j++) {
+
+			val = CNIC_RD(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL);
+			if (!(val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ))
+				break;
+			udelay(5);
+		}
+		if (val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) {
+			ret = -EBUSY;
+			break;
+		}
+	}
+	return ret;
+}
+
+static void cnic_free_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		cp->disable_int_sync(dev);
+		tasklet_disable(&cp->cnic_irq_task);
+		free_irq(ethdev->irq_arr[0].vector, dev);
+	}
+}
+
+static int cnic_init_bnx2_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		int err, i = 0;
+		int sblk_num = cp->status_blk_num;
+		u32 base = ((sblk_num - 1) * BNX2_HC_SB_CONFIG_SIZE) +
+			   BNX2_HC_SB_CONFIG_1;
+
+		CNIC_WR(dev, base, BNX2_HC_SB_CONFIG_1_ONE_SHOT);
+
+		CNIC_WR(dev, base + BNX2_HC_COMP_PROD_TRIP_OFF, (2 << 16) | 8);
+		CNIC_WR(dev, base + BNX2_HC_COM_TICKS_OFF, (64 << 16) | 220);
+		CNIC_WR(dev, base + BNX2_HC_CMD_TICKS_OFF, (64 << 16) | 220);
+
+		cp->bnx2_status_blk = cp->status_blk;
+		cp->last_status_idx = cp->bnx2_status_blk->status_idx;
+		tasklet_init(&cp->cnic_irq_task, &cnic_service_bnx2_msix,
+			     (unsigned long) dev);
+		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
+				  "cnic", dev);
+		if (err) {
+			tasklet_disable(&cp->cnic_irq_task);
+			return err;
+		}
+		while (cp->bnx2_status_blk->status_completion_producer_index &&
+		       i < 10) {
+			CNIC_WR(dev, BNX2_HC_COALESCE_NOW,
+				1 << (11 + sblk_num));
+			udelay(10);
+			i++;
+			barrier();
+		}
+		if (cp->bnx2_status_blk->status_completion_producer_index) {
+			cnic_free_irq(dev);
+			goto failed;
+		}
+
+	} else {
+		struct status_block *sblk = cp->status_blk;
+		u32 hc_cmd = CNIC_RD(dev, BNX2_HC_COMMAND);
+		int i = 0;
+
+		while (sblk->status_completion_producer_index && i < 10) {
+			CNIC_WR(dev, BNX2_HC_COMMAND,
+				hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
+			udelay(10);
+			i++;
+			barrier();
+		}
+		if (sblk->status_completion_producer_index)
+			goto failed;
+
+	}
+	return 0;
+
+failed:
+	printk(KERN_ERR PFX "%s: " "KCQ index not resetting to 0.\n",
+	       dev->netdev->name);
+	return -EBUSY;
+}
+
+static void cnic_enable_bnx2_int(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+		return;
+
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static void cnic_disable_bnx2_int_sync(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+		return;
+
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+	CNIC_RD(dev, BNX2_PCICFG_INT_ACK_CMD);
+	synchronize_irq(ethdev->irq_arr[0].vector);
+}
+
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 cid_addr, tx_cid, sb_id;
+	u32 val, offset0, offset1, offset2, offset3;
+	int i;
+	struct tx_bd *txbd;
+	dma_addr_t buf_map;
+	struct status_block *s_blk = cp->status_blk;
+
+	sb_id = cp->status_blk_num;
+	tx_cid = 20;
+	cnic_init_context(dev, tx_cid);
+	cnic_init_context(dev, tx_cid + 1);
+	cp->tx_cons_ptr = &s_blk->status_tx_quick_consumer_index2;
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		struct status_block_msix *sblk = cp->status_blk;
+
+		tx_cid = TX_TSS_CID + sb_id - 1;
+		cnic_init_context(dev, tx_cid);
+		CNIC_WR(dev, BNX2_TSCH_TSS_CFG, (sb_id << 24) |
+			(TX_TSS_CID << 7));
+		cp->tx_cons_ptr = &sblk->status_tx_quick_consumer_index;
+	}
+	cp->tx_cons = *cp->tx_cons_ptr;
+
+	cid_addr = GET_CID_ADDR(tx_cid);
+	if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+		u32 cid_addr2 = GET_CID_ADDR(tx_cid + 4) + 0x40;
+
+		for (i = 0; i < PHY_CTX_SIZE; i += 4)
+			cnic_ctx_wr(dev, cid_addr2, i, 0);
+
+		offset0 = BNX2_L2CTX_TYPE_XI;
+		offset1 = BNX2_L2CTX_CMD_TYPE_XI;
+		offset2 = BNX2_L2CTX_TBDR_BHADDR_HI_XI;
+		offset3 = BNX2_L2CTX_TBDR_BHADDR_LO_XI;
+	} else {
+		offset0 = BNX2_L2CTX_TYPE;
+		offset1 = BNX2_L2CTX_CMD_TYPE;
+		offset2 = BNX2_L2CTX_TBDR_BHADDR_HI;
+		offset3 = BNX2_L2CTX_TBDR_BHADDR_LO;
+	}
+	val = BNX2_L2CTX_TYPE_TYPE_L2 | BNX2_L2CTX_TYPE_SIZE_L2;
+	cnic_ctx_wr(dev, cid_addr, offset0, val);
+
+	val = BNX2_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16);
+	cnic_ctx_wr(dev, cid_addr, offset1, val);
+
+	txbd = (struct tx_bd *) cp->l2_ring;
+
+	buf_map = cp->l2_buf_map;
+	for (i = 0; i < MAX_TX_DESC_CNT; i++, txbd++) {
+		txbd->tx_bd_haddr_hi = (u64) buf_map >> 32;
+		txbd->tx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+	}
+	val = (u64) cp->l2_ring_map >> 32;
+	cnic_ctx_wr(dev, cid_addr, offset2, val);
+	txbd->tx_bd_haddr_hi = val;
+
+	val = (u64) cp->l2_ring_map & 0xffffffff;
+	cnic_ctx_wr(dev, cid_addr, offset3, val);
+	txbd->tx_bd_haddr_lo = val;
+}
+
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 cid_addr, sb_id, val, coal_reg, coal_val;
+	int i;
+	struct rx_bd *rxbd;
+	struct status_block *s_blk = cp->status_blk;
+
+	sb_id = cp->status_blk_num;
+	cnic_init_context(dev, 2);
+	cp->rx_cons_ptr = &s_blk->status_rx_quick_consumer_index2;
+	coal_reg = BNX2_HC_COMMAND;
+	coal_val = CNIC_RD(dev, coal_reg);
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		struct status_block_msix *sblk = cp->status_blk;
+
+		cp->rx_cons_ptr = &sblk->status_rx_quick_consumer_index;
+		coal_reg = BNX2_HC_COALESCE_NOW;
+		coal_val = 1 << (11 + sb_id);
+	}
+	i = 0;
+	while (!(*cp->rx_cons_ptr != 0) && i < 10) {
+		CNIC_WR(dev, coal_reg, coal_val);
+		udelay(10);
+		i++;
+		barrier();
+	}
+	cp->rx_cons = *cp->rx_cons_ptr;
+
+	cid_addr = GET_CID_ADDR(2);
+	val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE |
+	      BNX2_L2CTX_CTX_TYPE_SIZE_L2 | (0x02 << 8);
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
+
+	if (sb_id == 0)
+		val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+	else
+		val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
+
+	rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
+	for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) {
+		dma_addr_t buf_map;
+		int n = (i % cp->l2_rx_ring_size) + 1;
+
+		buf_map = cp->l2_buf_map + (n * cp->l2_single_buf_size);
+		rxbd->rx_bd_len = cp->l2_single_buf_size;
+		rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END;
+		rxbd->rx_bd_haddr_hi = (u64) buf_map >> 32;
+		rxbd->rx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+	}
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) >> 32;
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_HI, val);
+	rxbd->rx_bd_haddr_hi = val;
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) & 0xffffffff;
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_LO, val);
+	rxbd->rx_bd_haddr_lo = val;
+
+	val = cnic_reg_rd_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD);
+	cnic_reg_wr_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD, val | (1 << 2));
+}
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *dev)
+{
+	struct kwqe *wqes[1], l2kwqe;
+
+	memset(&l2kwqe, 0, sizeof(l2kwqe));
+	wqes[0] = &l2kwqe;
+	l2kwqe.kwqe_op_flag = (L2_LAYER_CODE << KWQE_FLAGS_LAYER_SHIFT) |
+			      (L2_KWQE_OPCODE_VALUE_FLUSH <<
+			       KWQE_OPCODE_SHIFT) | 2;
+	dev->submit_kwqes(dev, wqes, 1);
+}
+
+static void cnic_set_bnx2_mac(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 val;
+
+	val = cp->func << 2;
+
+	cp->shmem_base = cnic_reg_rd_ind(dev, BNX2_SHM_HDR_ADDR_0 + val);
+
+	val = cnic_reg_rd_ind(dev, cp->shmem_base +
+			      BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER);
+	dev->mac_addr[0] = (u8) (val >> 8);
+	dev->mac_addr[1] = (u8) val;
+
+	CNIC_WR(dev, BNX2_EMAC_MAC_MATCH4, val);
+
+	val = cnic_reg_rd_ind(dev, cp->shmem_base +
+			      BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER);
+	dev->mac_addr[2] = (u8) (val >> 24);
+	dev->mac_addr[3] = (u8) (val >> 16);
+	dev->mac_addr[4] = (u8) (val >> 8);
+	dev->mac_addr[5] = (u8) val;
+
+	CNIC_WR(dev, BNX2_EMAC_MAC_MATCH5, val);
+
+	val = 4 | BNX2_RPM_SORT_USER2_BC_EN;
+	if (CHIP_NUM(cp) != CHIP_NUM_5709)
+		val |= BNX2_RPM_SORT_USER2_PROM_VLAN;
+
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, 0x0);
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, val);
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, val | BNX2_RPM_SORT_USER2_ENA);
+}
+
+static int cnic_start_bnx2_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct status_block *sblk = cp->status_blk;
+	u32 val;
+	int err;
+
+	cnic_set_bnx2_mac(dev);
+
+	val = CNIC_RD(dev, BNX2_MQ_CONFIG);
+	val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
+	if (BCM_PAGE_BITS > 12)
+		val |= (12 - 8)  << 4;
+	else
+		val |= (BCM_PAGE_BITS - 8)  << 4;
+
+	CNIC_WR(dev, BNX2_MQ_CONFIG, val);
+
+	CNIC_WR(dev, BNX2_HC_COMP_PROD_TRIP, (2 << 16) | 8);
+	CNIC_WR(dev, BNX2_HC_COM_TICKS, (64 << 16) | 220);
+	CNIC_WR(dev, BNX2_HC_CMD_TICKS, (64 << 16) | 220);
+
+	err = cnic_setup_5709_context(dev, 1);
+	if (err)
+		return err;
+
+	cnic_init_context(dev, KWQ_CID);
+	cnic_init_context(dev, KCQ_CID);
+
+	cp->kwq_cid_addr = GET_CID_ADDR(KWQ_CID);
+	cp->kwq_io_addr = MB_GET_CID_ADDR(KWQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+	cp->max_kwq_idx = MAX_KWQ_IDX;
+	cp->kwq_prod_idx = 0;
+	cp->kwq_con_idx = 0;
+	cp->cnic_local_flags |= CNIC_LCL_FL_KWQ_INIT;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5706 || CHIP_NUM(cp) == CHIP_NUM_5708)
+		cp->kwq_con_idx_ptr = &sblk->status_rx_quick_consumer_index15;
+	else
+		cp->kwq_con_idx_ptr = &sblk->status_cmd_consumer_index;
+
+	/* Initialize the kernel work queue context. */
+	val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+	      (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_TYPE, val);
+
+	val = (BCM_PAGE_SIZE / sizeof(struct kwqe) - 1) << 16;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+	val = ((BCM_PAGE_SIZE / sizeof(struct kwqe)) << 16) | KWQ_PAGE_CNT;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+	val = (u32) ((u64) cp->kwq_info.pgtbl_map >> 32);
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+	val = (u32) cp->kwq_info.pgtbl_map;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+	cp->kcq_cid_addr = GET_CID_ADDR(KCQ_CID);
+	cp->kcq_io_addr = MB_GET_CID_ADDR(KCQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+	cp->kcq_prod_idx = 0;
+
+	/* Initialize the kernel complete queue context. */
+	val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+	      (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_TYPE, val);
+
+	val = (BCM_PAGE_SIZE / sizeof(struct kcqe) - 1) << 16;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+	val = ((BCM_PAGE_SIZE / sizeof(struct kcqe)) << 16) | KCQ_PAGE_CNT;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+	val = (u32) ((u64) cp->kcq_info.pgtbl_map >> 32);
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+	val = (u32) cp->kcq_info.pgtbl_map;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+	cp->int_num = 0;
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		u32 sb_id = cp->status_blk_num;
+		u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+
+		cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
+		cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+		cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+	}
+
+	/* Enable Commnad Scheduler notification when we write to the
+	 * host producer index of the kernel contexts. */
+	CNIC_WR(dev, BNX2_MQ_KNL_CMD_MASK1, 2);
+
+	/* Enable Command Scheduler notification when we write to either
+	 * the Send Queue or Receive Queue producer indexes of the kernel
+	 * bypass contexts. */
+	CNIC_WR(dev, BNX2_MQ_KNL_BYP_CMD_MASK1, 7);
+	CNIC_WR(dev, BNX2_MQ_KNL_BYP_WRITE_MASK1, 7);
+
+	/* Notify COM when the driver post an application buffer. */
+	CNIC_WR(dev, BNX2_MQ_KNL_RX_V2P_MASK2, 0x2000);
+
+	/* Set the CP and COM doorbells.  These two processors polls the
+	 * doorbell for a non zero value before running.  This must be done
+	 * after setting up the kernel queue contexts. */
+	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 1);
+	cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 1);
+
+	cnic_init_bnx2_tx_ring(dev);
+	cnic_init_bnx2_rx_ring(dev);
+
+	err = cnic_init_bnx2_irq(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cnic_init_irq failed\n",
+		       dev->netdev->name);
+		cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+		cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+		return err;
+	}
+
+	return 0;
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int err;
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EALREADY;
+
+	err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: register_cnic failed\n",
+		       dev->netdev->name);
+		goto err2;
+	}
+
+	dev->regview = ethdev->io_base;
+	cp->chip_id = ethdev->chip_id;
+	pci_dev_get(dev->pcidev);
+	cp->func = PCI_FUNC(dev->pcidev->devfn);
+	cp->status_blk = ethdev->irq_arr[0].status_blk;
+	cp->status_blk_num = ethdev->irq_arr[0].status_blk_num;
+
+	err = cp->alloc_resc(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: allocate resource failure\n",
+		       dev->netdev->name);
+		goto err1;
+	}
+
+	err = cp->start_hw(dev);
+	if (err)
+		goto err1;
+
+	err = cnic_cm_open(dev);
+	if (err)
+		goto err1;
+
+	set_bit(CNIC_F_CNIC_UP, &dev->flags);
+
+	cp->enable_int(dev);
+
+	return 0;
+
+err1:
+	ethdev->drv_unregister_cnic(dev->netdev);
+	cp->free_resc(dev);
+	pci_dev_put(dev->pcidev);
+err2:
+	return err;
+}
+
+static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	cnic_disable_bnx2_int_sync(dev);
+
+	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+	cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+
+	cnic_init_context(dev, KWQ_CID);
+	cnic_init_context(dev, KCQ_CID);
+
+	cnic_setup_5709_context(dev, 0);
+	cnic_free_irq(dev);
+
+	ethdev->drv_unregister_cnic(dev->netdev);
+
+	cnic_free_resc(dev);
+}
+
+static void cnic_stop_hw(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		clear_bit(CNIC_F_CNIC_UP, &dev->flags);
+		rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], NULL);
+		synchronize_rcu();
+		cnic_cm_shutdown(dev);
+		cp->stop_hw(dev);
+		pci_dev_put(dev->pcidev);
+	}
+}
+
+static void cnic_free_dev(struct cnic_dev *dev)
+{
+	int i = 0;
+
+	while ((atomic_read(&dev->ref_count) != 0) && i < 10) {
+		msleep(100);
+		i++;
+	}
+	if (atomic_read(&dev->ref_count) != 0)
+		printk(KERN_ERR PFX "%s: Failed waiting for ref count to go"
+				    " to zero.\n", dev->netdev->name);
+
+	printk(KERN_INFO PFX "Removed CNIC device: %s\n", dev->netdev->name);
+	dev_put(dev->netdev);
+	kfree(dev);
+}
+
+static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
+				       struct pci_dev *pdev)
+{
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	int alloc_size;
+
+	alloc_size = sizeof(struct cnic_dev) + sizeof(struct cnic_local);
+
+	cdev = kzalloc(alloc_size , GFP_KERNEL);
+	if (cdev == NULL) {
+		printk(KERN_ERR PFX "%s: allocate dev struct failure\n",
+		       dev->name);
+		return NULL;
+	}
+
+	cdev->netdev = dev;
+	cdev->cnic_priv = (char *)cdev + sizeof(struct cnic_dev);
+	cdev->register_device = cnic_register_device;
+	cdev->unregister_device = cnic_unregister_device;
+	cdev->iscsi_nl_msg_recv = cnic_iscsi_nl_msg_recv;
+
+	cp = cdev->cnic_priv;
+	cp->dev = cdev;
+	cp->uio_dev = -1;
+	cp->l2_single_buf_size = 0x400;
+	cp->l2_rx_ring_size = 3;
+
+	spin_lock_init(&cp->cnic_ulp_lock);
+
+	printk(KERN_INFO PFX "Added CNIC device: %s\n", dev->name);
+
+	return cdev;
+}
+
+static struct cnic_dev *init_bnx2_cnic(struct net_device *dev)
+{
+	struct pci_dev *pdev;
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	struct cnic_eth_dev *ethdev = NULL;
+	struct cnic_eth_dev *(*probe)(void *) = NULL;
+
+	probe = __symbol_get("bnx2_cnic_probe");
+	if (probe) {
+		ethdev = (*probe)(dev);
+		symbol_put_addr(probe);
+	}
+	if (!ethdev)
+		return NULL;
+
+	pdev = ethdev->pdev;
+	if (!pdev)
+		return NULL;
+
+	dev_hold(dev);
+	pci_dev_get(pdev);
+	if (pdev->device == PCI_DEVICE_ID_NX2_5709 ||
+	    pdev->device == PCI_DEVICE_ID_NX2_5709S) {
+		u8 rev;
+
+		pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+		if (rev < 0x10) {
+			pci_dev_put(pdev);
+			goto cnic_err;
+		}
+	}
+	pci_dev_put(pdev);
+
+	cdev = cnic_alloc_dev(dev, pdev);
+	if (cdev == NULL)
+		goto cnic_err;
+
+	set_bit(CNIC_F_BNX2_CLASS, &cdev->flags);
+	cdev->submit_kwqes = cnic_submit_bnx2_kwqes;
+
+	cp = cdev->cnic_priv;
+	cp->ethdev = ethdev;
+	cdev->pcidev = pdev;
+
+	cp->cnic_ops = &cnic_bnx2_ops;
+	cp->start_hw = cnic_start_bnx2_hw;
+	cp->stop_hw = cnic_stop_bnx2_hw;
+	cp->setup_pgtbl = cnic_setup_page_tbl;
+	cp->alloc_resc = cnic_alloc_bnx2_resc;
+	cp->free_resc = cnic_free_resc;
+	cp->start_cm = cnic_cm_init_bnx2_hw;
+	cp->stop_cm = cnic_cm_stop_bnx2_hw;
+	cp->enable_int = cnic_enable_bnx2_int;
+	cp->disable_int_sync = cnic_disable_bnx2_int_sync;
+	cp->close_conn = cnic_close_bnx2_conn;
+	cp->next_idx = cnic_bnx2_next_idx;
+	cp->hw_idx = cnic_bnx2_hw_idx;
+	return cdev;
+
+cnic_err:
+	dev_put(dev);
+	return NULL;
+}
+
+static struct cnic_dev *is_cnic_dev(struct net_device *dev)
+{
+	struct ethtool_drvinfo drvinfo;
+	struct cnic_dev *cdev = NULL;
+
+	if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) {
+		memset(&drvinfo, 0, sizeof(drvinfo));
+		dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
+
+		if (!strcmp(drvinfo.driver, "bnx2"))
+			cdev = init_bnx2_cnic(dev);
+		if (cdev) {
+			write_lock(&cnic_dev_lock);
+			list_add(&cdev->list, &cnic_dev_list);
+			write_unlock(&cnic_dev_lock);
+		}
+	}
+	return cdev;
+}
+
+/**
+ * netdev event handler
+ */
+static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
+							 void *ptr)
+{
+	struct net_device *netdev = ptr;
+	struct cnic_dev *dev;
+	int if_type;
+	int new_dev = 0;
+
+	dev = cnic_from_netdev(netdev);
+
+	if (!dev && (event == NETDEV_REGISTER || event == NETDEV_UP)) {
+		/* Check for the hot-plug device */
+		dev = is_cnic_dev(netdev);
+		if (dev) {
+			new_dev = 1;
+			cnic_hold(dev);
+		}
+	}
+	if (dev) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (new_dev)
+			cnic_ulp_init(dev);
+		else if (event == NETDEV_UNREGISTER)
+			cnic_ulp_exit(dev);
+		else if (event == NETDEV_UP) {
+			mutex_lock(&cnic_lock);
+			if (!cnic_start_hw(dev))
+				cnic_ulp_start(dev);
+			mutex_unlock(&cnic_lock);
+		}
+
+		rcu_read_lock();
+		for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+			struct cnic_ulp_ops *ulp_ops;
+			void *ctx;
+
+			ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+			if (!ulp_ops || !ulp_ops->indicate_netevent)
+				continue;
+
+			ctx = cp->ulp_handle[if_type];
+
+			ulp_ops->indicate_netevent(ctx, event);
+		}
+		rcu_read_unlock();
+
+		if (event == NETDEV_GOING_DOWN) {
+			mutex_lock(&cnic_lock);
+			cnic_ulp_stop(dev);
+			cnic_stop_hw(dev);
+			mutex_unlock(&cnic_lock);
+		} else if (event == NETDEV_UNREGISTER) {
+			write_lock(&cnic_dev_lock);
+			list_del_init(&dev->list);
+			write_unlock(&cnic_dev_lock);
+
+			cnic_put(dev);
+			cnic_free_dev(dev);
+			goto done;
+		}
+		cnic_put(dev);
+	}
+done:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block cnic_netdev_notifier = {
+	.notifier_call = cnic_netdev_event
+};
+
+static void cnic_release(void)
+{
+	struct cnic_dev *dev;
+
+	while (!list_empty(&cnic_dev_list)) {
+		dev = list_entry(cnic_dev_list.next, struct cnic_dev, list);
+		if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+			cnic_ulp_stop(dev);
+			cnic_stop_hw(dev);
+		}
+
+		cnic_ulp_exit(dev);
+		list_del_init(&dev->list);
+		cnic_free_dev(dev);
+	}
+}
+
+static int __init cnic_init(void)
+{
+	int rc = 0;
+
+	printk(KERN_INFO "%s", version);
+
+	rc = register_netdevice_notifier(&cnic_netdev_notifier);
+	if (rc) {
+		cnic_release();
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit cnic_exit(void)
+{
+	unregister_netdevice_notifier(&cnic_netdev_notifier);
+	cnic_release();
+	return;
+}
+
+module_init(cnic_init);
+module_exit(cnic_exit);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
new file mode 100644
index 00000000000..5192d4a9df5
--- /dev/null
+++ b/drivers/net/cnic.h
@@ -0,0 +1,299 @@
+/* cnic.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_H
+#define CNIC_H
+
+#define KWQ_PAGE_CNT	4
+#define KCQ_PAGE_CNT	16
+
+#define KWQ_CID 		24
+#define KCQ_CID 		25
+
+/*
+ *	krnlq_context definition
+ */
+#define L5_KRNLQ_FLAGS	0x00000000
+#define L5_KRNLQ_SIZE	0x00000000
+#define L5_KRNLQ_TYPE	0x00000000
+#define KRNLQ_FLAGS_PG_SZ					(0xf<<0)
+#define KRNLQ_FLAGS_PG_SZ_256					(0<<0)
+#define KRNLQ_FLAGS_PG_SZ_512					(1<<0)
+#define KRNLQ_FLAGS_PG_SZ_1K					(2<<0)
+#define KRNLQ_FLAGS_PG_SZ_2K					(3<<0)
+#define KRNLQ_FLAGS_PG_SZ_4K					(4<<0)
+#define KRNLQ_FLAGS_PG_SZ_8K					(5<<0)
+#define KRNLQ_FLAGS_PG_SZ_16K					(6<<0)
+#define KRNLQ_FLAGS_PG_SZ_32K					(7<<0)
+#define KRNLQ_FLAGS_PG_SZ_64K					(8<<0)
+#define KRNLQ_FLAGS_PG_SZ_128K					(9<<0)
+#define KRNLQ_FLAGS_PG_SZ_256K					(10<<0)
+#define KRNLQ_FLAGS_PG_SZ_512K					(11<<0)
+#define KRNLQ_FLAGS_PG_SZ_1M					(12<<0)
+#define KRNLQ_FLAGS_PG_SZ_2M					(13<<0)
+#define KRNLQ_FLAGS_QE_SELF_SEQ					(1<<15)
+#define KRNLQ_SIZE_TYPE_SIZE	((((0x28 + 0x1f) & ~0x1f) / 0x20) << 16)
+#define KRNLQ_TYPE_TYPE						(0xf<<28)
+#define KRNLQ_TYPE_TYPE_EMPTY					(0<<28)
+#define KRNLQ_TYPE_TYPE_KRNLQ					(6<<28)
+
+#define L5_KRNLQ_HOST_QIDX		0x00000004
+#define L5_KRNLQ_HOST_FW_QIDX		0x00000008
+#define L5_KRNLQ_NX_QE_SELF_SEQ 	0x0000000c
+#define L5_KRNLQ_QE_SELF_SEQ_MAX	0x0000000c
+#define L5_KRNLQ_NX_QE_HADDR_HI 	0x00000010
+#define L5_KRNLQ_NX_QE_HADDR_LO 	0x00000014
+#define L5_KRNLQ_PGTBL_PGIDX		0x00000018
+#define L5_KRNLQ_NX_PG_QIDX 		0x00000018
+#define L5_KRNLQ_PGTBL_NPAGES		0x0000001c
+#define L5_KRNLQ_QIDX_INCR		0x0000001c
+#define L5_KRNLQ_PGTBL_HADDR_HI 	0x00000020
+#define L5_KRNLQ_PGTBL_HADDR_LO 	0x00000024
+
+#define BNX2_PG_CTX_MAP			0x1a0034
+#define BNX2_ISCSI_CTX_MAP		0x1a0074
+
+struct cnic_redirect_entry {
+	struct dst_entry *old_dst;
+	struct dst_entry *new_dst;
+};
+
+#define MAX_COMPLETED_KCQE	64
+
+#define MAX_CNIC_L5_CONTEXT	256
+
+#define MAX_CM_SK_TBL_SZ	MAX_CNIC_L5_CONTEXT
+
+#define MAX_ISCSI_TBL_SZ	256
+
+#define CNIC_LOCAL_PORT_MIN	60000
+#define CNIC_LOCAL_PORT_MAX	61000
+#define CNIC_LOCAL_PORT_RANGE	(CNIC_LOCAL_PORT_MAX - CNIC_LOCAL_PORT_MIN)
+
+#define KWQE_CNT (BCM_PAGE_SIZE / sizeof(struct kwqe))
+#define KCQE_CNT (BCM_PAGE_SIZE / sizeof(struct kcqe))
+#define MAX_KWQE_CNT (KWQE_CNT - 1)
+#define MAX_KCQE_CNT (KCQE_CNT - 1)
+
+#define MAX_KWQ_IDX	((KWQ_PAGE_CNT * KWQE_CNT) - 1)
+#define MAX_KCQ_IDX	((KCQ_PAGE_CNT * KCQE_CNT) - 1)
+
+#define KWQ_PG(x) (((x) & ~MAX_KWQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KWQ_IDX(x) ((x) & MAX_KWQE_CNT)
+
+#define KCQ_PG(x) (((x) & ~MAX_KCQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KCQ_IDX(x) ((x) & MAX_KCQE_CNT)
+
+#define BNX2X_NEXT_KCQE(x) (((x) & (MAX_KCQE_CNT - 1)) ==		\
+		(MAX_KCQE_CNT - 1)) ?					\
+		(x) + 2 : (x) + 1
+
+#define BNX2X_KWQ_DATA_PG(cp, x) ((x) / (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA_IDX(cp, x) ((x) % (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA(cp, x)						\
+	&(cp)->kwq_16_data[BNX2X_KWQ_DATA_PG(cp, x)][BNX2X_KWQ_DATA_IDX(cp, x)]
+
+#define DEF_IPID_COUNT		0xc001
+
+#define DEF_KA_TIMEOUT		10000
+#define DEF_KA_INTERVAL		300000
+#define DEF_KA_MAX_PROBE_COUNT	3
+#define DEF_TOS			0
+#define DEF_TTL			0xfe
+#define DEF_SND_SEQ_SCALE	0
+#define DEF_RCV_BUF		0xffff
+#define DEF_SND_BUF		0xffff
+#define DEF_SEED		0
+#define DEF_MAX_RT_TIME		500
+#define DEF_MAX_DA_COUNT	2
+#define DEF_SWS_TIMER		1000
+#define DEF_MAX_CWND		0xffff
+
+struct cnic_ctx {
+	u32		cid;
+	void		*ctx;
+	dma_addr_t	mapping;
+};
+
+#define BNX2_MAX_CID		0x2000
+
+struct cnic_dma {
+	int		num_pages;
+	void		**pg_arr;
+	dma_addr_t	*pg_map_arr;
+	int		pgtbl_size;
+	u32		*pgtbl;
+	dma_addr_t	pgtbl_map;
+};
+
+struct cnic_id_tbl {
+	spinlock_t	lock;
+	u32		start;
+	u32		max;
+	u32		next;
+	unsigned long	*table;
+};
+
+#define CNIC_KWQ16_DATA_SIZE	128
+
+struct kwqe_16_data {
+	u8	data[CNIC_KWQ16_DATA_SIZE];
+};
+
+struct cnic_iscsi {
+	struct cnic_dma		task_array_info;
+	struct cnic_dma		r2tq_info;
+	struct cnic_dma		hq_info;
+};
+
+struct cnic_context {
+	u32			cid;
+	struct kwqe_16_data	*kwqe_data;
+	dma_addr_t		kwqe_data_mapping;
+	wait_queue_head_t	waitq;
+	int			wait_cond;
+	unsigned long		timestamp;
+	u32			ctx_flags;
+#define	CTX_FL_OFFLD_START	0x00000001
+	u8			ulp_proto_id;
+	union {
+		struct cnic_iscsi	*iscsi;
+	} proto;
+};
+
+struct cnic_local {
+
+	spinlock_t cnic_ulp_lock;
+	void *ulp_handle[MAX_CNIC_ULP_TYPE];
+	unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
+#define ULP_F_INIT	0
+#define ULP_F_START	1
+	struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
+
+	/* protected by ulp_lock */
+	u32 cnic_local_flags;
+#define	CNIC_LCL_FL_KWQ_INIT	0x00000001
+
+	struct cnic_dev *dev;
+
+	struct cnic_eth_dev *ethdev;
+
+	void		*l2_ring;
+	dma_addr_t	l2_ring_map;
+	int		l2_ring_size;
+	int		l2_rx_ring_size;
+
+	void		*l2_buf;
+	dma_addr_t	l2_buf_map;
+	int		l2_buf_size;
+	int		l2_single_buf_size;
+
+	u16		*rx_cons_ptr;
+	u16		*tx_cons_ptr;
+	u16		rx_cons;
+	u16		tx_cons;
+
+	u32 kwq_cid_addr;
+	u32 kcq_cid_addr;
+
+	struct cnic_dma		kwq_info;
+	struct kwqe		**kwq;
+
+	struct cnic_dma		kwq_16_data_info;
+
+	u16		max_kwq_idx;
+
+	u16		kwq_prod_idx;
+	u32		kwq_io_addr;
+
+	u16		*kwq_con_idx_ptr;
+	u16		kwq_con_idx;
+
+	struct cnic_dma	kcq_info;
+	struct kcqe	**kcq;
+
+	u16		kcq_prod_idx;
+	u32		kcq_io_addr;
+
+	void				*status_blk;
+	struct status_block_msix	*bnx2_status_blk;
+	struct host_status_block	*bnx2x_status_blk;
+
+	u32				status_blk_num;
+	u32				int_num;
+	u32				last_status_idx;
+	struct tasklet_struct		cnic_irq_task;
+
+	struct kcqe		*completed_kcq[MAX_COMPLETED_KCQE];
+
+	struct cnic_sock	*csk_tbl;
+	struct cnic_id_tbl	csk_port_tbl;
+
+	struct cnic_dma		conn_buf_info;
+	struct cnic_dma		gbl_buf_info;
+
+	struct cnic_iscsi	*iscsi_tbl;
+	struct cnic_context	*ctx_tbl;
+	struct cnic_id_tbl	cid_tbl;
+	int			max_iscsi_conn;
+	atomic_t		iscsi_conn;
+
+	/* per connection parameters */
+	int			num_iscsi_tasks;
+	int			num_ccells;
+	int			task_array_size;
+	int			r2tq_size;
+	int			hq_size;
+	int			num_cqs;
+
+	struct cnic_ctx		*ctx_arr;
+	int			ctx_blks;
+	int			ctx_blk_size;
+	int			cids_per_blk;
+
+	u32			chip_id;
+	int			func;
+	u32			shmem_base;
+
+	u32			uio_dev;
+	struct uio_info		*cnic_uinfo;
+
+	struct cnic_ops		*cnic_ops;
+	int			(*start_hw)(struct cnic_dev *);
+	void			(*stop_hw)(struct cnic_dev *);
+	void			(*setup_pgtbl)(struct cnic_dev *,
+					       struct cnic_dma *);
+	int			(*alloc_resc)(struct cnic_dev *);
+	void			(*free_resc)(struct cnic_dev *);
+	int			(*start_cm)(struct cnic_dev *);
+	void			(*stop_cm)(struct cnic_dev *);
+	void			(*enable_int)(struct cnic_dev *);
+	void			(*disable_int_sync)(struct cnic_dev *);
+	void			(*ack_int)(struct cnic_dev *);
+	void			(*close_conn)(struct cnic_sock *, u32 opcode);
+	u16			(*next_idx)(u16);
+	u16			(*hw_idx)(u16);
+};
+
+struct bnx2x_bd_chain_next {
+	u32	addr_lo;
+	u32	addr_hi;
+	u8	reserved[8];
+};
+
+#define ISCSI_RAMROD_CMD_ID_UPDATE_CONN		(ISCSI_KCQE_OPCODE_UPDATE_CONN)
+#define ISCSI_RAMROD_CMD_ID_INIT		(ISCSI_KCQE_OPCODE_INIT)
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+#endif
+
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
new file mode 100644
index 00000000000..cee80f69445
--- /dev/null
+++ b/drivers/net/cnic_defs.h
@@ -0,0 +1,580 @@
+
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#ifndef CNIC_DEFS_H
+#define CNIC_DEFS_H
+
+/* KWQ (kernel work queue) request op codes */
+#define L2_KWQE_OPCODE_VALUE_FLUSH                  (4)
+
+#define L4_KWQE_OPCODE_VALUE_CONNECT1               (50)
+#define L4_KWQE_OPCODE_VALUE_CONNECT2               (51)
+#define L4_KWQE_OPCODE_VALUE_CONNECT3               (52)
+#define L4_KWQE_OPCODE_VALUE_RESET                  (53)
+#define L4_KWQE_OPCODE_VALUE_CLOSE                  (54)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_SECRET          (60)
+#define L4_KWQE_OPCODE_VALUE_INIT_ULP               (61)
+
+#define L4_KWQE_OPCODE_VALUE_OFFLOAD_PG             (1)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_PG              (9)
+#define L4_KWQE_OPCODE_VALUE_UPLOAD_PG              (14)
+
+#define L5CM_RAMROD_CMD_ID_BASE			(0x80)
+#define L5CM_RAMROD_CMD_ID_TCP_CONNECT		(L5CM_RAMROD_CMD_ID_BASE + 3)
+#define L5CM_RAMROD_CMD_ID_CLOSE		(L5CM_RAMROD_CMD_ID_BASE + 12)
+#define L5CM_RAMROD_CMD_ID_ABORT		(L5CM_RAMROD_CMD_ID_BASE + 13)
+#define L5CM_RAMROD_CMD_ID_SEARCHER_DELETE	(L5CM_RAMROD_CMD_ID_BASE + 14)
+#define L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD	(L5CM_RAMROD_CMD_ID_BASE + 15)
+
+/* KCQ (kernel completion queue) response op codes */
+#define L4_KCQE_OPCODE_VALUE_CLOSE_COMP             (53)
+#define L4_KCQE_OPCODE_VALUE_RESET_COMP             (54)
+#define L4_KCQE_OPCODE_VALUE_FW_TCP_UPDATE          (55)
+#define L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE       (56)
+#define L4_KCQE_OPCODE_VALUE_RESET_RECEIVED         (57)
+#define L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED         (58)
+#define L4_KCQE_OPCODE_VALUE_INIT_ULP               (61)
+
+#define L4_KCQE_OPCODE_VALUE_OFFLOAD_PG             (1)
+#define L4_KCQE_OPCODE_VALUE_UPDATE_PG              (9)
+#define L4_KCQE_OPCODE_VALUE_UPLOAD_PG              (14)
+
+/* KCQ (kernel completion queue) completion status */
+#define L4_KCQE_COMPLETION_STATUS_SUCCESS		    (0)
+#define L4_KCQE_COMPLETION_STATUS_TIMEOUT        (0x93)
+
+#define L4_LAYER_CODE (4)
+#define L2_LAYER_CODE (2)
+
+/*
+ * L4 KCQ CQE
+ */
+struct l4_kcq {
+	u32 cid;
+	u32 pg_cid;
+	u32 conn_id;
+	u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+	u16 status;
+	u16 reserved1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved1;
+	u16 status;
+#endif
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KCQ_RESERVED3 (0x7<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define L4_KCQ_RESERVED3 (0xF<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * L4 KCQ CQE PG upload
+ */
+struct l4_kcq_upload_pg {
+	u32 pg_cid;
+#if defined(__BIG_ENDIAN)
+	u16 pg_status;
+	u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pg_ipid_count;
+	u16 pg_status;
+#endif
+	u32 reserved1[5];
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * Gracefully close the connection request
+ */
+struct l4_kwq_close_req {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+
+/*
+ * The first request to be passed in order to establish connection in option2
+ */
+struct l4_kwq_connect_req1 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u8 reserved0;
+	u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+	u8 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 pg_cid;
+	u32 src_ip;
+	u32 dst_ip;
+#if defined(__BIG_ENDIAN)
+	u16 dst_port;
+	u16 src_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 src_port;
+	u16 dst_port;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 rsrv1[3];
+	u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+	u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+	u8 rsrv1[3];
+#endif
+	u32 rsrv2;
+};
+
+
+/*
+ * The second ( optional )request to be passed in order to establish
+ * connection in option2 - for IPv6 only
+ */
+struct l4_kwq_connect_req2 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u8 reserved0;
+	u8 rsrv;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rsrv;
+	u8 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 reserved2;
+	u32 src_ip_v6_2;
+	u32 src_ip_v6_3;
+	u32 src_ip_v6_4;
+	u32 dst_ip_v6_2;
+	u32 dst_ip_v6_3;
+	u32 dst_ip_v6_4;
+};
+
+
+/*
+ * The third ( and last )request to be passed in order to establish
+ * connection in option2
+ */
+struct l4_kwq_connect_req3 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 ka_timeout;
+	u32 ka_interval ;
+#if defined(__BIG_ENDIAN)
+	u8 snd_seq_scale;
+	u8 ttl;
+	u8 tos;
+	u8 ka_max_probe_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_max_probe_count;
+	u8 tos;
+	u8 ttl;
+	u8 snd_seq_scale;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 pmtu;
+	u16 mss;
+#elif defined(__LITTLE_ENDIAN)
+	u16 mss;
+	u16 pmtu;
+#endif
+	u32 rcv_buf;
+	u32 snd_buf;
+	u32 seed;
+};
+
+
+/*
+ * a KWQE request to offload a PG connection
+ */
+struct l4_kwq_offload_pg {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 l2hdr_nbytes;
+	u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+	u8 da0;
+	u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da1;
+	u8 da0;
+	u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+	u8 l2hdr_nbytes;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 da2;
+	u8 da3;
+	u8 da4;
+	u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da5;
+	u8 da4;
+	u8 da3;
+	u8 da2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sa0;
+	u8 sa1;
+	u8 sa2;
+	u8 sa3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 sa3;
+	u8 sa2;
+	u8 sa1;
+	u8 sa0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sa4;
+	u8 sa5;
+	u16 etype;
+#elif defined(__LITTLE_ENDIAN)
+	u16 etype;
+	u8 sa5;
+	u8 sa4;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 vlan_tag;
+	u16 ipid_start;
+#elif defined(__LITTLE_ENDIAN)
+	u16 ipid_start;
+	u16 vlan_tag;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ipid_count;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 ipid_count;
+#endif
+	u32 host_opaque;
+};
+
+
+/*
+ * Abortively close the connection request
+ */
+struct l4_kwq_reset_req {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+
+/*
+ * a KWQE request to update a PG connection
+ */
+struct l4_kwq_update_pg {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+	u8 opcode;
+	u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+	u16 oper16;
+	u8 opcode;
+	u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 pg_cid;
+	u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+	u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+	u8 pg_unused_a;
+	u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pg_ipid_count;
+	u8 pg_unused_a;
+	u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserverd3;
+	u8 da0;
+	u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da1;
+	u8 da0;
+	u16 reserverd3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 da2;
+	u8 da3;
+	u8 da4;
+	u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da5;
+	u8 da4;
+	u8 da3;
+	u8 da2;
+#endif
+	u32 reserved4;
+	u32 reserved5;
+};
+
+
+/*
+ * a KWQE request to upload a PG or L4 context
+ */
+struct l4_kwq_upload {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+	u8 opcode;
+	u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+	u16 oper16;
+	u8 opcode;
+	u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+#endif /* CNIC_DEFS_H */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
new file mode 100644
index 00000000000..06380963a34
--- /dev/null
+++ b/drivers/net/cnic_if.h
@@ -0,0 +1,299 @@
+/* cnic_if.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_IF_H
+#define CNIC_IF_H
+
+#define CNIC_MODULE_VERSION	"2.0.0"
+#define CNIC_MODULE_RELDATE	"May 21, 2009"
+
+#define CNIC_ULP_RDMA		0
+#define CNIC_ULP_ISCSI		1
+#define CNIC_ULP_L4		2
+#define MAX_CNIC_ULP_TYPE_EXT	2
+#define MAX_CNIC_ULP_TYPE	3
+
+struct kwqe {
+	u32 kwqe_op_flag;
+
+#define KWQE_OPCODE_MASK	0x00ff0000
+#define KWQE_OPCODE_SHIFT	16
+#define KWQE_FLAGS_LAYER_SHIFT	28
+#define KWQE_OPCODE(x)		((x & KWQE_OPCODE_MASK) >> KWQE_OPCODE_SHIFT)
+
+	u32 kwqe_info0;
+	u32 kwqe_info1;
+	u32 kwqe_info2;
+	u32 kwqe_info3;
+	u32 kwqe_info4;
+	u32 kwqe_info5;
+	u32 kwqe_info6;
+};
+
+struct kwqe_16 {
+	u32 kwqe_info0;
+	u32 kwqe_info1;
+	u32 kwqe_info2;
+	u32 kwqe_info3;
+};
+
+struct kcqe {
+	u32 kcqe_info0;
+	u32 kcqe_info1;
+	u32 kcqe_info2;
+	u32 kcqe_info3;
+	u32 kcqe_info4;
+	u32 kcqe_info5;
+	u32 kcqe_info6;
+	u32 kcqe_op_flag;
+		#define KCQE_RAMROD_COMPLETION		(0x1<<27) /* Everest */
+		#define KCQE_FLAGS_LAYER_MASK		(0x7<<28)
+		#define KCQE_FLAGS_LAYER_MASK_MISC	(0<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L2	(2<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L3	(3<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L4	(4<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_RDMA	(5<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_ISCSI	(6<<28)
+		#define KCQE_FLAGS_NEXT 		(1<<31)
+		#define KCQE_FLAGS_OPCODE_MASK		(0xff<<16)
+		#define KCQE_FLAGS_OPCODE_SHIFT		(16)
+		#define KCQE_OPCODE(op)			\
+		(((op) & KCQE_FLAGS_OPCODE_MASK) >> KCQE_FLAGS_OPCODE_SHIFT)
+};
+
+#define MAX_CNIC_CTL_DATA	64
+#define MAX_DRV_CTL_DATA	64
+
+#define CNIC_CTL_STOP_CMD		1
+#define CNIC_CTL_START_CMD		2
+#define CNIC_CTL_COMPLETION_CMD		3
+
+#define DRV_CTL_IO_WR_CMD		0x101
+#define DRV_CTL_IO_RD_CMD		0x102
+#define DRV_CTL_CTX_WR_CMD		0x103
+#define DRV_CTL_CTXTBL_WR_CMD		0x104
+#define DRV_CTL_COMPLETION_CMD		0x105
+
+struct cnic_ctl_completion {
+	u32	cid;
+};
+
+struct drv_ctl_completion {
+	u32	comp_count;
+};
+
+struct cnic_ctl_info {
+	int	cmd;
+	union {
+		struct cnic_ctl_completion comp;
+		char bytes[MAX_CNIC_CTL_DATA];
+	} data;
+};
+
+struct drv_ctl_io {
+	u32		cid_addr;
+	u32		offset;
+	u32		data;
+	dma_addr_t	dma_addr;
+};
+
+struct drv_ctl_info {
+	int	cmd;
+	union {
+		struct drv_ctl_completion comp;
+		struct drv_ctl_io io;
+		char bytes[MAX_DRV_CTL_DATA];
+	} data;
+};
+
+struct cnic_ops {
+	struct module	*cnic_owner;
+	/* Calls to these functions are protected by RCU.  When
+	 * unregistering, we wait for any calls to complete before
+	 * continuing.
+	 */
+	int		(*cnic_handler)(void *, void *);
+	int		(*cnic_ctl)(void *, struct cnic_ctl_info *);
+};
+
+#define MAX_CNIC_VEC	8
+
+struct cnic_irq {
+	unsigned int	vector;
+	void		*status_blk;
+	u32		status_blk_num;
+	u32		irq_flags;
+#define CNIC_IRQ_FL_MSIX		0x00000001
+};
+
+struct cnic_eth_dev {
+	struct module	*drv_owner;
+	u32		drv_state;
+#define CNIC_DRV_STATE_REGD		0x00000001
+#define CNIC_DRV_STATE_USING_MSIX	0x00000002
+	u32		chip_id;
+	u32		max_kwqe_pending;
+	struct pci_dev	*pdev;
+	void __iomem	*io_base;
+
+	u32		ctx_tbl_offset;
+	u32		ctx_tbl_len;
+	int		ctx_blk_size;
+	u32		starting_cid;
+	u32		max_iscsi_conn;
+	u32		max_fcoe_conn;
+	u32		max_rdma_conn;
+	u32		reserved0[2];
+
+	int		num_irq;
+	struct cnic_irq	irq_arr[MAX_CNIC_VEC];
+	int		(*drv_register_cnic)(struct net_device *,
+					     struct cnic_ops *, void *);
+	int		(*drv_unregister_cnic)(struct net_device *);
+	int		(*drv_submit_kwqes_32)(struct net_device *,
+					       struct kwqe *[], u32);
+	int		(*drv_submit_kwqes_16)(struct net_device *,
+					       struct kwqe_16 *[], u32);
+	int		(*drv_ctl)(struct net_device *, struct drv_ctl_info *);
+	unsigned long	reserved1[2];
+};
+
+struct cnic_sockaddr {
+	union {
+		struct sockaddr_in	v4;
+		struct sockaddr_in6	v6;
+	} local;
+	union {
+		struct sockaddr_in	v4;
+		struct sockaddr_in6	v6;
+	} remote;
+};
+
+struct cnic_sock {
+	struct cnic_dev *dev;
+	void	*context;
+	u32	src_ip[4];
+	u32	dst_ip[4];
+	u16	src_port;
+	u16	dst_port;
+	u16	vlan_id;
+	unsigned char old_ha[6];
+	unsigned char ha[6];
+	u32	mtu;
+	u32	cid;
+	u32	l5_cid;
+	u32	pg_cid;
+	int	ulp_type;
+
+	u32	ka_timeout;
+	u32	ka_interval;
+	u8	ka_max_probe_count;
+	u8	tos;
+	u8	ttl;
+	u8	snd_seq_scale;
+	u32	rcv_buf;
+	u32	snd_buf;
+	u32	seed;
+
+	unsigned long	tcp_flags;
+#define SK_TCP_NO_DELAY_ACK	0x1
+#define SK_TCP_KEEP_ALIVE	0x2
+#define SK_TCP_NAGLE		0x4
+#define SK_TCP_TIMESTAMP	0x8
+#define SK_TCP_SACK		0x10
+#define SK_TCP_SEG_SCALING	0x20
+	unsigned long	flags;
+#define SK_F_INUSE		0
+#define SK_F_OFFLD_COMPLETE	1
+#define SK_F_OFFLD_SCHED	2
+#define SK_F_PG_OFFLD_COMPLETE	3
+#define SK_F_CONNECT_START	4
+#define SK_F_IPV6		5
+#define SK_F_CLOSING		7
+
+	atomic_t ref_count;
+	u32 state;
+	struct kwqe kwqe1;
+	struct kwqe kwqe2;
+	struct kwqe kwqe3;
+};
+
+struct cnic_dev {
+	struct net_device	*netdev;
+	struct pci_dev		*pcidev;
+	void __iomem		*regview;
+	struct list_head	list;
+
+	int (*register_device)(struct cnic_dev *dev, int ulp_type,
+			       void *ulp_ctx);
+	int (*unregister_device)(struct cnic_dev *dev, int ulp_type);
+	int (*submit_kwqes)(struct cnic_dev *dev, struct kwqe *wqes[],
+				u32 num_wqes);
+	int (*submit_kwqes_16)(struct cnic_dev *dev, struct kwqe_16 *wqes[],
+				u32 num_wqes);
+
+	int (*cm_create)(struct cnic_dev *, int, u32, u32, struct cnic_sock **,
+			 void *);
+	int (*cm_destroy)(struct cnic_sock *);
+	int (*cm_connect)(struct cnic_sock *, struct cnic_sockaddr *);
+	int (*cm_abort)(struct cnic_sock *);
+	int (*cm_close)(struct cnic_sock *);
+	struct cnic_dev *(*cm_select_dev)(struct sockaddr_in *, int ulp_type);
+	int (*iscsi_nl_msg_recv)(struct cnic_dev *dev, u32 msg_type,
+				 char *data, u16 data_size);
+	unsigned long	flags;
+#define CNIC_F_CNIC_UP		1
+#define CNIC_F_BNX2_CLASS	3
+#define CNIC_F_BNX2X_CLASS	4
+	atomic_t	ref_count;
+	u8		mac_addr[6];
+
+	int		max_iscsi_conn;
+	int		max_fcoe_conn;
+	int		max_rdma_conn;
+
+	void		*cnic_priv;
+};
+
+#define CNIC_WR(dev, off, val)		writel(val, dev->regview + off)
+#define CNIC_WR16(dev, off, val)	writew(val, dev->regview + off)
+#define CNIC_WR8(dev, off, val)		writeb(val, dev->regview + off)
+#define CNIC_RD(dev, off)		readl(dev->regview + off)
+#define CNIC_RD16(dev, off)		readw(dev->regview + off)
+
+struct cnic_ulp_ops {
+	/* Calls to these functions are protected by RCU.  When
+	 * unregistering, we wait for any calls to complete before
+	 * continuing.
+	 */
+
+	void (*cnic_init)(struct cnic_dev *dev);
+	void (*cnic_exit)(struct cnic_dev *dev);
+	void (*cnic_start)(void *ulp_ctx);
+	void (*cnic_stop)(void *ulp_ctx);
+	void (*indicate_kcqes)(void *ulp_ctx, struct kcqe *cqes[],
+				u32 num_cqes);
+	void (*indicate_netevent)(void *ulp_ctx, unsigned long event);
+	void (*cm_connect_complete)(struct cnic_sock *);
+	void (*cm_close_complete)(struct cnic_sock *);
+	void (*cm_abort_complete)(struct cnic_sock *);
+	void (*cm_remote_close)(struct cnic_sock *);
+	void (*cm_remote_abort)(struct cnic_sock *);
+	void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
+				  char *data, u16 data_size);
+	struct module *owner;
+};
+
+extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
+
+extern int cnic_unregister_driver(int ulp_type);
+
+#endif
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 3f476c7c073..58afafbd3b9 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -202,7 +202,7 @@ struct cpmac_priv {
 	void __iomem *regs;
 	struct mii_bus *mii_bus;
 	struct phy_device *phy;
-	char phy_name[BUS_ID_SIZE];
+	char phy_name[MII_BUS_ID_SIZE + 3];
 	int oldlink, oldspeed, oldduplex;
 	u32 msg_enable;
 	struct net_device *dev;
@@ -615,13 +615,13 @@ static void cpmac_end_xmit(struct net_device *dev, int queue)
 
 		dev_kfree_skb_irq(desc->skb);
 		desc->skb = NULL;
-		if (netif_subqueue_stopped(dev, queue))
+		if (__netif_subqueue_stopped(dev, queue))
 			netif_wake_subqueue(dev, queue);
 	} else {
 		if (netif_msg_tx_err(priv) && net_ratelimit())
 			printk(KERN_WARNING
 			       "%s: end_xmit: spurious interrupt\n", dev->name);
-		if (netif_subqueue_stopped(dev, queue))
+		if (__netif_subqueue_stopped(dev, queue))
 			netif_wake_subqueue(dev, queue);
 	}
 }
@@ -731,7 +731,6 @@ static void cpmac_clear_tx(struct net_device *dev)
 
 static void cpmac_hw_error(struct work_struct *work)
 {
-	int i;
 	struct cpmac_priv *priv =
 		container_of(work, struct cpmac_priv, reset_work);
 
@@ -818,7 +817,6 @@ static irqreturn_t cpmac_irq(int irq, void *dev_id)
 
 static void cpmac_tx_timeout(struct net_device *dev)
 {
-	int i;
 	struct cpmac_priv *priv = netdev_priv(dev);
 
 	spin_lock(&priv->lock);
@@ -1093,11 +1091,24 @@ static int cpmac_stop(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops cpmac_netdev_ops = {
+	.ndo_open		= cpmac_open,
+	.ndo_stop		= cpmac_stop,
+	.ndo_start_xmit		= cpmac_start_xmit,
+	.ndo_tx_timeout		= cpmac_tx_timeout,
+	.ndo_set_multicast_list	= cpmac_set_multicast_list,
+	.ndo_so_ioctl		= cpmac_ioctl,
+	.ndo_set_config		= cpmac_config,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int external_switch;
 
 static int __devinit cpmac_probe(struct platform_device *pdev)
 {
-	int rc, phy_id, i;
+	int rc, phy_id;
 	char *mdio_bus_id = "0";
 	struct resource *mem;
 	struct cpmac_priv *priv;
@@ -1143,14 +1154,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 
 	dev->irq = platform_get_irq_byname(pdev, "irq");
 
-	dev->open               = cpmac_open;
-	dev->stop               = cpmac_stop;
-	dev->set_config         = cpmac_config;
-	dev->hard_start_xmit    = cpmac_start_xmit;
-	dev->do_ioctl           = cpmac_ioctl;
-	dev->set_multicast_list = cpmac_set_multicast_list;
-	dev->tx_timeout         = cpmac_tx_timeout;
-	dev->ethtool_ops        = &cpmac_ethtool_ops;
+	dev->netdev_ops = &cpmac_netdev_ops;
+	dev->ethtool_ops = &cpmac_ethtool_ops;
 
 	netif_napi_add(dev, &priv->napi, cpmac_poll, 64);
 
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 7433b88eed7..3eee666a9cd 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1551,7 +1551,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 		spin_unlock_irq(&lp->lock);
 		if (net_debug) printk("cs89x0: Tx buffer not free!\n");
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	/* Write the contents of the packet */
 	writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/cxgb3/Makefile
index 34346798532..29aff78c782 100644
--- a/drivers/net/cxgb3/Makefile
+++ b/drivers/net/cxgb3/Makefile
@@ -5,4 +5,4 @@
 obj-$(CONFIG_CHELSIO_T3) += cxgb3.o
 
 cxgb3-objs := cxgb3_main.o ael1002.o vsc8211.o t3_hw.o mc5.o \
-	      xgmac.o sge.o l2t.o cxgb3_offload.o
+	      xgmac.o sge.o l2t.o cxgb3_offload.o aq100x.o
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index c888e97c967..1694fad3872 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -195,7 +195,7 @@ struct sge_qset {		/* an SGE queue set */
 	struct sge_rspq rspq;
 	struct sge_fl fl[SGE_RXQ_PER_SET];
 	struct sge_txq txq[SGE_TXQ_PER_SET];
-	struct napi_gro_fraginfo lro_frag_tbl;
+	int nomem;
 	int lro_enabled;
 	void *lro_va;
 	struct net_device *netdev;
@@ -253,6 +253,8 @@ struct adapter {
 	struct mutex mdio_lock;
 	spinlock_t stats_lock;
 	spinlock_t work_lock;
+
+	struct sk_buff *nofail_skb;
 };
 
 static inline u32 t3_read_reg(struct adapter *adapter, u32 reg_addr)
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c
index e1b22490ff5..9fe008ec9ba 100644
--- a/drivers/net/cxgb3/ael1002.c
+++ b/drivers/net/cxgb3/ael1002.c
@@ -33,14 +33,6 @@
 #include "regs.h"
 
 enum {
-	PMD_RSD     = 10,   /* PMA/PMD receive signal detect register */
-	PCS_STAT1_X = 24,   /* 10GBASE-X PCS status 1 register */
-	PCS_STAT1_R = 32,   /* 10GBASE-R PCS status 1 register */
-	XS_LN_STAT  = 24    /* XS lane status register */
-};
-
-enum {
-	AEL100X_TX_DISABLE = 9,
 	AEL100X_TX_CONFIG1 = 0xc002,
 	AEL1002_PWR_DOWN_HI = 0xc011,
 	AEL1002_PWR_DOWN_LO = 0xc012,
@@ -52,12 +44,33 @@ enum {
 	AEL_I2C_STAT = 0xc30c,
 	AEL2005_GPIO_CTRL = 0xc214,
 	AEL2005_GPIO_STAT = 0xc215,
+
+	AEL2020_GPIO_INTR   = 0xc103,	/* Latch High (LH) */
+	AEL2020_GPIO_CTRL   = 0xc108,	/* Store Clear (SC) */
+	AEL2020_GPIO_STAT   = 0xc10c,	/* Read Only (RO) */
+	AEL2020_GPIO_CFG    = 0xc110,	/* Read Write (RW) */
+
+	AEL2020_GPIO_SDA    = 0,	/* IN: i2c serial data */
+	AEL2020_GPIO_MODDET = 1,	/* IN: Module Detect */
+	AEL2020_GPIO_0      = 3,	/* IN: unassigned */
+	AEL2020_GPIO_1      = 2,	/* OUT: unassigned */
+	AEL2020_GPIO_LSTAT  = AEL2020_GPIO_1, /* wired to link status LED */
 };
 
 enum { edc_none, edc_sr, edc_twinax };
 
 /* PHY module I2C device address */
-#define MODULE_DEV_ADDR 0xa0
+enum {
+	MODULE_DEV_ADDR	= 0xa0,
+	SFF_DEV_ADDR	= 0xa2,
+};
+
+/* PHY transceiver type */
+enum {
+	phy_transtype_unknown = 0,
+	phy_transtype_sfp     = 3,
+	phy_transtype_xfp     = 6,
+};
 
 #define AEL2005_MODDET_IRQ 4
 
@@ -74,8 +87,8 @@ static int set_phy_regs(struct cphy *phy, const struct reg_val *rv)
 
 	for (err = 0; rv->mmd_addr && !err; rv++) {
 		if (rv->clear_bits == 0xffff)
-			err = mdio_write(phy, rv->mmd_addr, rv->reg_addr,
-					 rv->set_bits);
+			err = t3_mdio_write(phy, rv->mmd_addr, rv->reg_addr,
+					    rv->set_bits);
 		else
 			err = t3_mdio_change_bits(phy, rv->mmd_addr,
 						  rv->reg_addr, rv->clear_bits,
@@ -86,21 +99,54 @@ static int set_phy_regs(struct cphy *phy, const struct reg_val *rv)
 
 static void ael100x_txon(struct cphy *phy)
 {
-	int tx_on_gpio = phy->addr == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
+	int tx_on_gpio =
+		phy->mdio.prtad == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
 
 	msleep(100);
 	t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio);
 	msleep(30);
 }
 
+/*
+ * Read an 8-bit word from a device attached to the PHY's i2c bus.
+ */
+static int ael_i2c_rd(struct cphy *phy, int dev_addr, int word_addr)
+{
+	int i, err;
+	unsigned int stat, data;
+
+	err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL_I2C_CTRL,
+			    (dev_addr << 8) | (1 << 8) | word_addr);
+	if (err)
+		return err;
+
+	for (i = 0; i < 200; i++) {
+		msleep(1);
+		err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_STAT, &stat);
+		if (err)
+			return err;
+		if ((stat & 3) == 1) {
+			err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_DATA,
+					   &data);
+			if (err)
+				return err;
+			return data >> 8;
+		}
+	}
+	CH_WARN(phy->adapter, "PHY %u i2c read of dev.addr %#x.%#x timed out\n",
+		phy->mdio.prtad, dev_addr, word_addr);
+	return -ETIMEDOUT;
+}
+
 static int ael1002_power_down(struct cphy *phy, int enable)
 {
 	int err;
 
-	err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_DISABLE, !!enable);
+	err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS, !!enable);
 	if (!err)
-		err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
-					  BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				    MDIO_CTRL1_LPOWER, enable);
 	return err;
 }
 
@@ -109,11 +155,11 @@ static int ael1002_reset(struct cphy *phy, int wait)
 	int err;
 
 	if ((err = ael1002_power_down(phy, 0)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_CONFIG1, 1)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_HI, 0)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_LO, 0)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_XFI_EQL, 0x18)) ||
-	    (err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL1002_LB_EN,
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL100X_TX_CONFIG1, 1)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_HI, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_LO, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_XFI_EQL, 0x18)) ||
+	    (err = t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL1002_LB_EN,
 				       0, 1 << 5)))
 		return err;
 	return 0;
@@ -132,12 +178,15 @@ static int get_link_status_r(struct cphy *phy, int *link_ok, int *speed,
 {
 	if (link_ok) {
 		unsigned int stat0, stat1, stat2;
-		int err = mdio_read(phy, MDIO_DEV_PMA_PMD, PMD_RSD, &stat0);
+		int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+				       MDIO_PMA_RXDET, &stat0);
 
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_PCS, PCS_STAT1_R, &stat1);
+			err = t3_mdio_read(phy, MDIO_MMD_PCS,
+					   MDIO_PCS_10GBRT_STAT1, &stat1);
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_XGXS, XS_LN_STAT, &stat2);
+			err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+					   MDIO_PHYXS_LNSTAT, &stat2);
 		if (err)
 			return err;
 		*link_ok = (stat0 & stat1 & (stat2 >> 12)) & 1;
@@ -157,6 +206,7 @@ static struct cphy_ops ael1002_ops = {
 	.intr_handler = ael1002_intr_noop,
 	.get_link_status = get_link_status_r,
 	.power_down = ael1002_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -171,13 +221,13 @@ int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
 
 static int ael1006_reset(struct cphy *phy, int wait)
 {
-	return t3_phy_reset(phy, MDIO_DEV_PMA_PMD, wait);
+	return t3_phy_reset(phy, MDIO_MMD_PMAPMD, wait);
 }
 
 static int ael1006_power_down(struct cphy *phy, int enable)
 {
-	return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
-				   BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+	return mdio_set_flag(&phy->mdio, phy->mdio.prtad, MDIO_MMD_PMAPMD,
+			     MDIO_CTRL1, MDIO_CTRL1_LPOWER, enable);
 }
 
 static struct cphy_ops ael1006_ops = {
@@ -188,6 +238,7 @@ static struct cphy_ops ael1006_ops = {
 	.intr_handler = t3_phy_lasi_intr_handler,
 	.get_link_status = get_link_status_r,
 	.power_down = ael1006_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -200,12 +251,57 @@ int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
 	return 0;
 }
 
+/*
+ * Decode our module type.
+ */
+static int ael2xxx_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+
+	if (delay_ms)
+		msleep(delay_ms);
+
+	/* see SFF-8472 for below */
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 3);
+	if (v < 0)
+		return v;
+
+	if (v == 0x10)
+		return phy_modtype_sr;
+	if (v == 0x20)
+		return phy_modtype_lr;
+	if (v == 0x40)
+		return phy_modtype_lrm;
+
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 6);
+	if (v < 0)
+		return v;
+	if (v != 4)
+		goto unknown;
+
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 10);
+	if (v < 0)
+		return v;
+
+	if (v & 0x80) {
+		v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 0x12);
+		if (v < 0)
+			return v;
+		return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax;
+	}
+unknown:
+	return phy_modtype_unknown;
+}
+
+/*
+ * Code to support the Aeluros/NetLogic 2005 10Gb PHY.
+ */
 static int ael2005_setup_sr_edc(struct cphy *phy)
 {
 	static struct reg_val regs[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc003, 0xffff, 0x181 },
-		{ MDIO_DEV_PMA_PMD, 0xc010, 0xffff, 0x448a },
-		{ MDIO_DEV_PMA_PMD, 0xc04a, 0xffff, 0x5200 },
+		{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x181 },
+		{ MDIO_MMD_PMAPMD, 0xc010, 0xffff, 0x448a },
+		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5200 },
 		{ 0, 0, 0, 0 }
 	};
 	static u16 sr_edc[] = {
@@ -490,8 +586,8 @@ static int ael2005_setup_sr_edc(struct cphy *phy)
 	msleep(50);
 
 	for (i = 0; i < ARRAY_SIZE(sr_edc) && !err; i += 2)
-		err = mdio_write(phy, MDIO_DEV_PMA_PMD, sr_edc[i],
-				 sr_edc[i + 1]);
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, sr_edc[i],
+				    sr_edc[i + 1]);
 	if (!err)
 		phy->priv = edc_sr;
 	return err;
@@ -500,12 +596,12 @@ static int ael2005_setup_sr_edc(struct cphy *phy)
 static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
 {
 	static struct reg_val regs[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc04a, 0xffff, 0x5a00 },
+		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5a00 },
 		{ 0, 0, 0, 0 }
 	};
 	static struct reg_val preemphasis[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc014, 0xffff, 0xfe16 },
-		{ MDIO_DEV_PMA_PMD, 0xc015, 0xffff, 0xa000 },
+		{ MDIO_MMD_PMAPMD, 0xc014, 0xffff, 0xfe16 },
+		{ MDIO_MMD_PMAPMD, 0xc015, 0xffff, 0xa000 },
 		{ 0, 0, 0, 0 }
 	};
 	static u16 twinax_edc[] = {
@@ -887,132 +983,73 @@ static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
 	msleep(50);
 
 	for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2)
-		err = mdio_write(phy, MDIO_DEV_PMA_PMD, twinax_edc[i],
-				 twinax_edc[i + 1]);
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i],
+				    twinax_edc[i + 1]);
 	if (!err)
 		phy->priv = edc_twinax;
 	return err;
 }
 
-static int ael2005_i2c_rd(struct cphy *phy, int dev_addr, int word_addr)
-{
-	int i, err;
-	unsigned int stat, data;
-
-	err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL_I2C_CTRL,
-			 (dev_addr << 8) | (1 << 8) | word_addr);
-	if (err)
-		return err;
-
-	for (i = 0; i < 5; i++) {
-		msleep(1);
-		err = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL_I2C_STAT, &stat);
-		if (err)
-			return err;
-		if ((stat & 3) == 1) {
-			err = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL_I2C_DATA,
-					&data);
-			if (err)
-				return err;
-			return data >> 8;
-		}
-	}
-	CH_WARN(phy->adapter, "PHY %u I2C read of addr %u timed out\n",
-		phy->addr, word_addr);
-	return -ETIMEDOUT;
-}
-
-static int get_module_type(struct cphy *phy, int delay_ms)
+static int ael2005_get_module_type(struct cphy *phy, int delay_ms)
 {
 	int v;
 	unsigned int stat;
 
-	v = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, &stat);
+	v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, &stat);
 	if (v)
 		return v;
 
 	if (stat & (1 << 8))			/* module absent */
 		return phy_modtype_none;
 
-	if (delay_ms)
-		msleep(delay_ms);
-
-	/* see SFF-8472 for below */
-	v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 3);
-	if (v < 0)
-		return v;
-
-	if (v == 0x10)
-		return phy_modtype_sr;
-	if (v == 0x20)
-		return phy_modtype_lr;
-	if (v == 0x40)
-		return phy_modtype_lrm;
-
-	v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 6);
-	if (v < 0)
-		return v;
-	if (v != 4)
-		goto unknown;
-
-	v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 10);
-	if (v < 0)
-		return v;
-
-	if (v & 0x80) {
-		v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 0x12);
-		if (v < 0)
-			return v;
-		return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax;
-	}
-unknown:
-	return phy_modtype_unknown;
+	return ael2xxx_get_module_type(phy, delay_ms);
 }
 
 static int ael2005_intr_enable(struct cphy *phy)
 {
-	int err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, 0x200);
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x200);
 	return err ? err : t3_phy_lasi_intr_enable(phy);
 }
 
 static int ael2005_intr_disable(struct cphy *phy)
 {
-	int err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, 0x100);
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x100);
 	return err ? err : t3_phy_lasi_intr_disable(phy);
 }
 
 static int ael2005_intr_clear(struct cphy *phy)
 {
-	int err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, 0xd00);
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0xd00);
 	return err ? err : t3_phy_lasi_intr_clear(phy);
 }
 
 static int ael2005_reset(struct cphy *phy, int wait)
 {
 	static struct reg_val regs0[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc001, 0, 1 << 5 },
-		{ MDIO_DEV_PMA_PMD, 0xc017, 0, 1 << 5 },
-		{ MDIO_DEV_PMA_PMD, 0xc013, 0xffff, 0xf341 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0x8000 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0x8100 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0x8000 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0 },
+		{ MDIO_MMD_PMAPMD, 0xc001, 0, 1 << 5 },
+		{ MDIO_MMD_PMAPMD, 0xc017, 0, 1 << 5 },
+		{ MDIO_MMD_PMAPMD, 0xc013, 0xffff, 0xf341 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8100 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0 },
 		{ 0, 0, 0, 0 }
 	};
 	static struct reg_val regs1[] = {
-		{ MDIO_DEV_PMA_PMD, 0xca00, 0xffff, 0x0080 },
-		{ MDIO_DEV_PMA_PMD, 0xca12, 0xffff, 0 },
+		{ MDIO_MMD_PMAPMD, 0xca00, 0xffff, 0x0080 },
+		{ MDIO_MMD_PMAPMD, 0xca12, 0xffff, 0 },
 		{ 0, 0, 0, 0 }
 	};
 
 	int err;
 	unsigned int lasi_ctrl;
 
-	err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, &lasi_ctrl);
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
 	if (err)
 		return err;
 
-	err = t3_phy_reset(phy, MDIO_DEV_PMA_PMD, 0);
+	err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 0);
 	if (err)
 		return err;
 
@@ -1024,7 +1061,7 @@ static int ael2005_reset(struct cphy *phy, int wait)
 
 	msleep(50);
 
-	err = get_module_type(phy, 0);
+	err = ael2005_get_module_type(phy, 0);
 	if (err < 0)
 		return err;
 	phy->modtype = err;
@@ -1051,18 +1088,18 @@ static int ael2005_intr_handler(struct cphy *phy)
 	unsigned int stat;
 	int ret, edc_needed, cause = 0;
 
-	ret = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_STAT, &stat);
+	ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_STAT, &stat);
 	if (ret)
 		return ret;
 
 	if (stat & AEL2005_MODDET_IRQ) {
-		ret = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL,
-				 0xd00);
+		ret = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL,
+				    0xd00);
 		if (ret)
 			return ret;
 
 		/* modules have max 300 ms init time after hot plug */
-		ret = get_module_type(phy, 300);
+		ret = ael2005_get_module_type(phy, 300);
 		if (ret < 0)
 			return ret;
 
@@ -1098,6 +1135,7 @@ static struct cphy_ops ael2005_ops = {
 	.intr_handler    = ael2005_intr_handler,
 	.get_link_status = get_link_status_r,
 	.power_down      = ael1002_power_down,
+	.mmds            = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -1107,11 +1145,667 @@ int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
 		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
 		  SUPPORTED_IRQ, "10GBASE-R");
 	msleep(125);
-	return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL_OPT_SETTINGS, 0,
+	return t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS, 0,
 				   1 << 5);
 }
 
 /*
+ * Setup EDC and other parameters for operation with an optical module.
+ */
+static int ael2020_setup_sr_edc(struct cphy *phy)
+{
+	static struct reg_val regs[] = {
+		/* set CDR offset to 10 */
+		{ MDIO_MMD_PMAPMD, 0xcc01, 0xffff, 0x488a },
+
+		/* adjust 10G RX bias current */
+		{ MDIO_MMD_PMAPMD, 0xcb1b, 0xffff, 0x0200 },
+		{ MDIO_MMD_PMAPMD, 0xcb1c, 0xffff, 0x00f0 },
+		{ MDIO_MMD_PMAPMD, 0xcc06, 0xffff, 0x00e0 },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err;
+
+	err = set_phy_regs(phy, regs);
+	msleep(50);
+	if (err)
+		return err;
+
+	phy->priv = edc_sr;
+	return 0;
+}
+
+/*
+ * Setup EDC and other parameters for operation with an TWINAX module.
+ */
+static int ael2020_setup_twinax_edc(struct cphy *phy, int modtype)
+{
+	/* set uC to 40MHz */
+	static struct reg_val uCclock40MHz[] = {
+		{ MDIO_MMD_PMAPMD, 0xff28, 0xffff, 0x4001 },
+		{ MDIO_MMD_PMAPMD, 0xff2a, 0xffff, 0x0002 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* activate uC clock */
+	static struct reg_val uCclockActivate[] = {
+		{ MDIO_MMD_PMAPMD, 0xd000, 0xffff, 0x5200 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* set PC to start of SRAM and activate uC */
+	static struct reg_val uCactivate[] = {
+		{ MDIO_MMD_PMAPMD, 0xd080, 0xffff, 0x0100 },
+		{ MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* TWINAX EDC firmware */
+	static u16 twinax_edc[] = {
+		0xd800, 0x4009,
+		0xd801, 0x2fff,
+		0xd802, 0x300f,
+		0xd803, 0x40aa,
+		0xd804, 0x401c,
+		0xd805, 0x401e,
+		0xd806, 0x2ff4,
+		0xd807, 0x3dc4,
+		0xd808, 0x2035,
+		0xd809, 0x3035,
+		0xd80a, 0x6524,
+		0xd80b, 0x2cb2,
+		0xd80c, 0x3012,
+		0xd80d, 0x1002,
+		0xd80e, 0x26e2,
+		0xd80f, 0x3022,
+		0xd810, 0x1002,
+		0xd811, 0x27d2,
+		0xd812, 0x3022,
+		0xd813, 0x1002,
+		0xd814, 0x2822,
+		0xd815, 0x3012,
+		0xd816, 0x1002,
+		0xd817, 0x2492,
+		0xd818, 0x3022,
+		0xd819, 0x1002,
+		0xd81a, 0x2772,
+		0xd81b, 0x3012,
+		0xd81c, 0x1002,
+		0xd81d, 0x23d2,
+		0xd81e, 0x3022,
+		0xd81f, 0x1002,
+		0xd820, 0x22cd,
+		0xd821, 0x301d,
+		0xd822, 0x27f2,
+		0xd823, 0x3022,
+		0xd824, 0x1002,
+		0xd825, 0x5553,
+		0xd826, 0x0307,
+		0xd827, 0x2522,
+		0xd828, 0x3022,
+		0xd829, 0x1002,
+		0xd82a, 0x2142,
+		0xd82b, 0x3012,
+		0xd82c, 0x1002,
+		0xd82d, 0x4016,
+		0xd82e, 0x5e63,
+		0xd82f, 0x0344,
+		0xd830, 0x2142,
+		0xd831, 0x3012,
+		0xd832, 0x1002,
+		0xd833, 0x400e,
+		0xd834, 0x2522,
+		0xd835, 0x3022,
+		0xd836, 0x1002,
+		0xd837, 0x2b52,
+		0xd838, 0x3012,
+		0xd839, 0x1002,
+		0xd83a, 0x2742,
+		0xd83b, 0x3022,
+		0xd83c, 0x1002,
+		0xd83d, 0x25e2,
+		0xd83e, 0x3022,
+		0xd83f, 0x1002,
+		0xd840, 0x2fa4,
+		0xd841, 0x3dc4,
+		0xd842, 0x6624,
+		0xd843, 0x414b,
+		0xd844, 0x56b3,
+		0xd845, 0x03c6,
+		0xd846, 0x866b,
+		0xd847, 0x400c,
+		0xd848, 0x2712,
+		0xd849, 0x3012,
+		0xd84a, 0x1002,
+		0xd84b, 0x2c4b,
+		0xd84c, 0x309b,
+		0xd84d, 0x56b3,
+		0xd84e, 0x03c3,
+		0xd84f, 0x866b,
+		0xd850, 0x400c,
+		0xd851, 0x2272,
+		0xd852, 0x3022,
+		0xd853, 0x1002,
+		0xd854, 0x2742,
+		0xd855, 0x3022,
+		0xd856, 0x1002,
+		0xd857, 0x25e2,
+		0xd858, 0x3022,
+		0xd859, 0x1002,
+		0xd85a, 0x2fb4,
+		0xd85b, 0x3dc4,
+		0xd85c, 0x6624,
+		0xd85d, 0x56b3,
+		0xd85e, 0x03c3,
+		0xd85f, 0x866b,
+		0xd860, 0x401c,
+		0xd861, 0x2c45,
+		0xd862, 0x3095,
+		0xd863, 0x5b53,
+		0xd864, 0x2372,
+		0xd865, 0x3012,
+		0xd866, 0x13c2,
+		0xd867, 0x5cc3,
+		0xd868, 0x2712,
+		0xd869, 0x3012,
+		0xd86a, 0x1312,
+		0xd86b, 0x2b52,
+		0xd86c, 0x3012,
+		0xd86d, 0x1002,
+		0xd86e, 0x2742,
+		0xd86f, 0x3022,
+		0xd870, 0x1002,
+		0xd871, 0x2582,
+		0xd872, 0x3022,
+		0xd873, 0x1002,
+		0xd874, 0x2142,
+		0xd875, 0x3012,
+		0xd876, 0x1002,
+		0xd877, 0x628f,
+		0xd878, 0x2985,
+		0xd879, 0x33a5,
+		0xd87a, 0x25e2,
+		0xd87b, 0x3022,
+		0xd87c, 0x1002,
+		0xd87d, 0x5653,
+		0xd87e, 0x03d2,
+		0xd87f, 0x401e,
+		0xd880, 0x6f72,
+		0xd881, 0x1002,
+		0xd882, 0x628f,
+		0xd883, 0x2304,
+		0xd884, 0x3c84,
+		0xd885, 0x6436,
+		0xd886, 0xdff4,
+		0xd887, 0x6436,
+		0xd888, 0x2ff5,
+		0xd889, 0x3005,
+		0xd88a, 0x8656,
+		0xd88b, 0xdfba,
+		0xd88c, 0x56a3,
+		0xd88d, 0xd05a,
+		0xd88e, 0x2972,
+		0xd88f, 0x3012,
+		0xd890, 0x1392,
+		0xd891, 0xd05a,
+		0xd892, 0x56a3,
+		0xd893, 0xdfba,
+		0xd894, 0x0383,
+		0xd895, 0x6f72,
+		0xd896, 0x1002,
+		0xd897, 0x2b45,
+		0xd898, 0x3005,
+		0xd899, 0x4178,
+		0xd89a, 0x5653,
+		0xd89b, 0x0384,
+		0xd89c, 0x2a62,
+		0xd89d, 0x3012,
+		0xd89e, 0x1002,
+		0xd89f, 0x2f05,
+		0xd8a0, 0x3005,
+		0xd8a1, 0x41c8,
+		0xd8a2, 0x5653,
+		0xd8a3, 0x0382,
+		0xd8a4, 0x0002,
+		0xd8a5, 0x4218,
+		0xd8a6, 0x2474,
+		0xd8a7, 0x3c84,
+		0xd8a8, 0x6437,
+		0xd8a9, 0xdff4,
+		0xd8aa, 0x6437,
+		0xd8ab, 0x2ff5,
+		0xd8ac, 0x3c05,
+		0xd8ad, 0x8757,
+		0xd8ae, 0xb888,
+		0xd8af, 0x9787,
+		0xd8b0, 0xdff4,
+		0xd8b1, 0x6724,
+		0xd8b2, 0x866a,
+		0xd8b3, 0x6f72,
+		0xd8b4, 0x1002,
+		0xd8b5, 0x2641,
+		0xd8b6, 0x3021,
+		0xd8b7, 0x1001,
+		0xd8b8, 0xc620,
+		0xd8b9, 0x0000,
+		0xd8ba, 0xc621,
+		0xd8bb, 0x0000,
+		0xd8bc, 0xc622,
+		0xd8bd, 0x00ce,
+		0xd8be, 0xc623,
+		0xd8bf, 0x007f,
+		0xd8c0, 0xc624,
+		0xd8c1, 0x0032,
+		0xd8c2, 0xc625,
+		0xd8c3, 0x0000,
+		0xd8c4, 0xc627,
+		0xd8c5, 0x0000,
+		0xd8c6, 0xc628,
+		0xd8c7, 0x0000,
+		0xd8c8, 0xc62c,
+		0xd8c9, 0x0000,
+		0xd8ca, 0x0000,
+		0xd8cb, 0x2641,
+		0xd8cc, 0x3021,
+		0xd8cd, 0x1001,
+		0xd8ce, 0xc502,
+		0xd8cf, 0x53ac,
+		0xd8d0, 0xc503,
+		0xd8d1, 0x2cd3,
+		0xd8d2, 0xc600,
+		0xd8d3, 0x2a6e,
+		0xd8d4, 0xc601,
+		0xd8d5, 0x2a2c,
+		0xd8d6, 0xc605,
+		0xd8d7, 0x5557,
+		0xd8d8, 0xc60c,
+		0xd8d9, 0x5400,
+		0xd8da, 0xc710,
+		0xd8db, 0x0700,
+		0xd8dc, 0xc711,
+		0xd8dd, 0x0f06,
+		0xd8de, 0xc718,
+		0xd8df, 0x0700,
+		0xd8e0, 0xc719,
+		0xd8e1, 0x0f06,
+		0xd8e2, 0xc720,
+		0xd8e3, 0x4700,
+		0xd8e4, 0xc721,
+		0xd8e5, 0x0f06,
+		0xd8e6, 0xc728,
+		0xd8e7, 0x0700,
+		0xd8e8, 0xc729,
+		0xd8e9, 0x1207,
+		0xd8ea, 0xc801,
+		0xd8eb, 0x7f50,
+		0xd8ec, 0xc802,
+		0xd8ed, 0x7760,
+		0xd8ee, 0xc803,
+		0xd8ef, 0x7fce,
+		0xd8f0, 0xc804,
+		0xd8f1, 0x520e,
+		0xd8f2, 0xc805,
+		0xd8f3, 0x5c11,
+		0xd8f4, 0xc806,
+		0xd8f5, 0x3c51,
+		0xd8f6, 0xc807,
+		0xd8f7, 0x4061,
+		0xd8f8, 0xc808,
+		0xd8f9, 0x49c1,
+		0xd8fa, 0xc809,
+		0xd8fb, 0x3840,
+		0xd8fc, 0xc80a,
+		0xd8fd, 0x0000,
+		0xd8fe, 0xc821,
+		0xd8ff, 0x0002,
+		0xd900, 0xc822,
+		0xd901, 0x0046,
+		0xd902, 0xc844,
+		0xd903, 0x182f,
+		0xd904, 0xc013,
+		0xd905, 0xf341,
+		0xd906, 0xc084,
+		0xd907, 0x0030,
+		0xd908, 0xc904,
+		0xd909, 0x1401,
+		0xd90a, 0xcb0c,
+		0xd90b, 0x0004,
+		0xd90c, 0xcb0e,
+		0xd90d, 0xa00a,
+		0xd90e, 0xcb0f,
+		0xd90f, 0xc0c0,
+		0xd910, 0xcb10,
+		0xd911, 0xc0c0,
+		0xd912, 0xcb11,
+		0xd913, 0x00a0,
+		0xd914, 0xcb12,
+		0xd915, 0x0007,
+		0xd916, 0xc241,
+		0xd917, 0xa000,
+		0xd918, 0xc243,
+		0xd919, 0x7fe0,
+		0xd91a, 0xc604,
+		0xd91b, 0x000e,
+		0xd91c, 0xc609,
+		0xd91d, 0x00f5,
+		0xd91e, 0xc611,
+		0xd91f, 0x000e,
+		0xd920, 0xc660,
+		0xd921, 0x9600,
+		0xd922, 0xc687,
+		0xd923, 0x0004,
+		0xd924, 0xc60a,
+		0xd925, 0x04f5,
+		0xd926, 0x0000,
+		0xd927, 0x2641,
+		0xd928, 0x3021,
+		0xd929, 0x1001,
+		0xd92a, 0xc620,
+		0xd92b, 0x14e5,
+		0xd92c, 0xc621,
+		0xd92d, 0xc53d,
+		0xd92e, 0xc622,
+		0xd92f, 0x3cbe,
+		0xd930, 0xc623,
+		0xd931, 0x4452,
+		0xd932, 0xc624,
+		0xd933, 0xc5c5,
+		0xd934, 0xc625,
+		0xd935, 0xe01e,
+		0xd936, 0xc627,
+		0xd937, 0x0000,
+		0xd938, 0xc628,
+		0xd939, 0x0000,
+		0xd93a, 0xc62c,
+		0xd93b, 0x0000,
+		0xd93c, 0x0000,
+		0xd93d, 0x2b84,
+		0xd93e, 0x3c74,
+		0xd93f, 0x6435,
+		0xd940, 0xdff4,
+		0xd941, 0x6435,
+		0xd942, 0x2806,
+		0xd943, 0x3006,
+		0xd944, 0x8565,
+		0xd945, 0x2b24,
+		0xd946, 0x3c24,
+		0xd947, 0x6436,
+		0xd948, 0x1002,
+		0xd949, 0x2b24,
+		0xd94a, 0x3c24,
+		0xd94b, 0x6436,
+		0xd94c, 0x4045,
+		0xd94d, 0x8656,
+		0xd94e, 0x5663,
+		0xd94f, 0x0302,
+		0xd950, 0x401e,
+		0xd951, 0x1002,
+		0xd952, 0x2807,
+		0xd953, 0x31a7,
+		0xd954, 0x20c4,
+		0xd955, 0x3c24,
+		0xd956, 0x6724,
+		0xd957, 0x1002,
+		0xd958, 0x2807,
+		0xd959, 0x3187,
+		0xd95a, 0x20c4,
+		0xd95b, 0x3c24,
+		0xd95c, 0x6724,
+		0xd95d, 0x1002,
+		0xd95e, 0x24f4,
+		0xd95f, 0x3c64,
+		0xd960, 0x6436,
+		0xd961, 0xdff4,
+		0xd962, 0x6436,
+		0xd963, 0x1002,
+		0xd964, 0x2006,
+		0xd965, 0x3d76,
+		0xd966, 0xc161,
+		0xd967, 0x6134,
+		0xd968, 0x6135,
+		0xd969, 0x5443,
+		0xd96a, 0x0303,
+		0xd96b, 0x6524,
+		0xd96c, 0x00fb,
+		0xd96d, 0x1002,
+		0xd96e, 0x20d4,
+		0xd96f, 0x3c24,
+		0xd970, 0x2025,
+		0xd971, 0x3005,
+		0xd972, 0x6524,
+		0xd973, 0x1002,
+		0xd974, 0xd019,
+		0xd975, 0x2104,
+		0xd976, 0x3c24,
+		0xd977, 0x2105,
+		0xd978, 0x3805,
+		0xd979, 0x6524,
+		0xd97a, 0xdff4,
+		0xd97b, 0x4005,
+		0xd97c, 0x6524,
+		0xd97d, 0x2e8d,
+		0xd97e, 0x303d,
+		0xd97f, 0x2408,
+		0xd980, 0x35d8,
+		0xd981, 0x5dd3,
+		0xd982, 0x0307,
+		0xd983, 0x8887,
+		0xd984, 0x63a7,
+		0xd985, 0x8887,
+		0xd986, 0x63a7,
+		0xd987, 0xdffd,
+		0xd988, 0x00f9,
+		0xd989, 0x1002,
+		0xd98a, 0x0000,
+	};
+	int i, err;
+
+	/* set uC clock and activate it */
+	err = set_phy_regs(phy, uCclock40MHz);
+	msleep(500);
+	if (err)
+		return err;
+	err = set_phy_regs(phy, uCclockActivate);
+	msleep(500);
+	if (err)
+		return err;
+
+	/* write TWINAX EDC firmware into PHY */
+	for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2)
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i],
+				    twinax_edc[i + 1]);
+	/* activate uC */
+	err = set_phy_regs(phy, uCactivate);
+	if (!err)
+		phy->priv = edc_twinax;
+	return err;
+}
+
+/*
+ * Return Module Type.
+ */
+static int ael2020_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+	unsigned int stat;
+
+	v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_STAT, &stat);
+	if (v)
+		return v;
+
+	if (stat & (0x1 << (AEL2020_GPIO_MODDET*4))) {
+		/* module absent */
+		return phy_modtype_none;
+	}
+
+	return ael2xxx_get_module_type(phy, delay_ms);
+}
+
+/*
+ * Enable PHY interrupts.  We enable "Module Detection" interrupts (on any
+ * state transition) and then generic Link Alarm Status Interrupt (LASI).
+ */
+static int ael2020_intr_enable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+				0x2 << (AEL2020_GPIO_MODDET*4));
+	return err ? err : t3_phy_lasi_intr_enable(phy);
+}
+
+/*
+ * Disable PHY interrupts.  The mirror of the above ...
+ */
+static int ael2020_intr_disable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+				0x1 << (AEL2020_GPIO_MODDET*4));
+	return err ? err : t3_phy_lasi_intr_disable(phy);
+}
+
+/*
+ * Clear PHY interrupt state.
+ */
+static int ael2020_intr_clear(struct cphy *phy)
+{
+	/*
+	 * The GPIO Interrupt register on the AEL2020 is a "Latching High"
+	 * (LH) register which is cleared to the current state when it's read.
+	 * Thus, we simply read the register and discard the result.
+	 */
+	unsigned int stat;
+	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+	return err ? err : t3_phy_lasi_intr_clear(phy);
+}
+
+/*
+ * Reset the PHY and put it into a canonical operating state.
+ */
+static int ael2020_reset(struct cphy *phy, int wait)
+{
+	static struct reg_val regs0[] = {
+		/* Erratum #2: CDRLOL asserted, causing PMA link down status */
+		{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
+
+		/* force XAUI to send LF when RX_LOS is asserted */
+		{ MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 },
+
+		/* RX_LOS pin is active high */
+		{ MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS,
+			0x0020, 0x0020 },
+
+		/* output Module's Loss Of Signal (LOS) to LED */
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
+			0xffff, 0x0004 },
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+			0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err;
+	unsigned int lasi_ctrl;
+
+	/* grab current interrupt state */
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
+	if (err)
+		return err;
+
+	err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 125);
+	if (err)
+		return err;
+	msleep(100);
+
+	/* basic initialization for all module types */
+	phy->priv = edc_none;
+	err = set_phy_regs(phy, regs0);
+	if (err)
+		return err;
+
+	/* determine module type and perform appropriate initialization */
+	err = ael2020_get_module_type(phy, 0);
+	if (err < 0)
+		return err;
+	phy->modtype = (u8)err;
+	if (err == phy_modtype_twinax || err == phy_modtype_twinax_long)
+		err = ael2020_setup_twinax_edc(phy, err);
+	else
+		err = ael2020_setup_sr_edc(phy);
+	if (err)
+		return err;
+
+	/* reset wipes out interrupts, reenable them if they were on */
+	if (lasi_ctrl & 1)
+		err = ael2005_intr_enable(phy);
+	return err;
+}
+
+/*
+ * Handle a PHY interrupt.
+ */
+static int ael2020_intr_handler(struct cphy *phy)
+{
+	unsigned int stat;
+	int ret, edc_needed, cause = 0;
+
+	ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & (0x1 << AEL2020_GPIO_MODDET)) {
+		/* modules have max 300 ms init time after hot plug */
+		ret = ael2020_get_module_type(phy, 300);
+		if (ret < 0)
+			return ret;
+
+		phy->modtype = (u8)ret;
+		if (ret == phy_modtype_none)
+			edc_needed = phy->priv;       /* on unplug retain EDC */
+		else if (ret == phy_modtype_twinax ||
+			 ret == phy_modtype_twinax_long)
+			edc_needed = edc_twinax;
+		else
+			edc_needed = edc_sr;
+
+		if (edc_needed != phy->priv) {
+			ret = ael2020_reset(phy, 0);
+			return ret ? ret : cphy_cause_module_change;
+		}
+		cause = cphy_cause_module_change;
+	}
+
+	ret = t3_phy_lasi_intr_handler(phy);
+	if (ret < 0)
+		return ret;
+
+	ret |= cause;
+	return ret ? ret : cphy_cause_link_change;
+}
+
+static struct cphy_ops ael2020_ops = {
+	.reset           = ael2020_reset,
+	.intr_enable     = ael2020_intr_enable,
+	.intr_disable    = ael2020_intr_disable,
+	.intr_clear      = ael2020_intr_clear,
+	.intr_handler    = ael2020_intr_handler,
+	.get_link_status = get_link_status_r,
+	.power_down      = ael1002_power_down,
+	.mmds		 = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+			const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael2020_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
+		  SUPPORTED_IRQ, "10GBASE-R");
+	msleep(125);
+	return 0;
+}
+
+/*
  * Get link status for a 10GBASE-X device.
  */
 static int get_link_status_x(struct cphy *phy, int *link_ok, int *speed,
@@ -1119,12 +1813,15 @@ static int get_link_status_x(struct cphy *phy, int *link_ok, int *speed,
 {
 	if (link_ok) {
 		unsigned int stat0, stat1, stat2;
-		int err = mdio_read(phy, MDIO_DEV_PMA_PMD, PMD_RSD, &stat0);
+		int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+				       MDIO_PMA_RXDET, &stat0);
 
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_PCS, PCS_STAT1_X, &stat1);
+			err = t3_mdio_read(phy, MDIO_MMD_PCS,
+					   MDIO_PCS_10GBX_STAT1, &stat1);
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_XGXS, XS_LN_STAT, &stat2);
+			err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+					   MDIO_PHYXS_LNSTAT, &stat2);
 		if (err)
 			return err;
 		*link_ok = (stat0 & (stat1 >> 12) & (stat2 >> 12)) & 1;
@@ -1144,6 +1841,7 @@ static struct cphy_ops qt2045_ops = {
 	.intr_handler = t3_phy_lasi_intr_handler,
 	.get_link_status = get_link_status_x,
 	.power_down = ael1006_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -1159,9 +1857,10 @@ int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
 	 * Some cards where the PHY is supposed to be at address 0 actually
 	 * have it at 1.
 	 */
-	if (!phy_addr && !mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &stat) &&
+	if (!phy_addr &&
+	    !t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &stat) &&
 	    stat == 0xffff)
-		phy->addr = 1;
+		phy->mdio.prtad = 1;
 	return 0;
 }
 
@@ -1175,15 +1874,16 @@ static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok,
 {
 	if (link_ok) {
 		unsigned int status;
+		int prtad = phy->mdio.prtad;
 
 		status = t3_read_reg(phy->adapter,
-				     XGM_REG(A_XGM_SERDES_STAT0, phy->addr)) |
+				     XGM_REG(A_XGM_SERDES_STAT0, prtad)) |
 		    t3_read_reg(phy->adapter,
-				XGM_REG(A_XGM_SERDES_STAT1, phy->addr)) |
+				    XGM_REG(A_XGM_SERDES_STAT1, prtad)) |
 		    t3_read_reg(phy->adapter,
-				XGM_REG(A_XGM_SERDES_STAT2, phy->addr)) |
+				XGM_REG(A_XGM_SERDES_STAT2, prtad)) |
 		    t3_read_reg(phy->adapter,
-				XGM_REG(A_XGM_SERDES_STAT3, phy->addr));
+				XGM_REG(A_XGM_SERDES_STAT3, prtad));
 		*link_ok = !(status & F_LOWSIG0);
 	}
 	if (speed)
@@ -1211,7 +1911,7 @@ static struct cphy_ops xaui_direct_ops = {
 int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
 			    int phy_addr, const struct mdio_ops *mdio_ops)
 {
-	cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
+	cphy_init(phy, adapter, MDIO_PRTAD_NONE, &xaui_direct_ops, mdio_ops,
 		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
 		  "10GBASE-CX4");
 	return 0;
diff --git a/drivers/net/cxgb3/aq100x.c b/drivers/net/cxgb3/aq100x.c
new file mode 100644
index 00000000000..b1fd5bf836e
--- /dev/null
+++ b/drivers/net/cxgb3/aq100x.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "common.h"
+#include "regs.h"
+
+enum {
+	/* MDIO_DEV_PMA_PMD registers */
+	AQ_LINK_STAT	= 0xe800,
+	AQ_IMASK_PMA	= 0xf000,
+
+	/* MDIO_DEV_XGXS registers */
+	AQ_XAUI_RX_CFG	= 0xc400,
+	AQ_XAUI_TX_CFG	= 0xe400,
+
+	/* MDIO_DEV_ANEG registers */
+	AQ_1G_CTRL	= 0xc400,
+	AQ_ANEG_STAT	= 0xc800,
+
+	/* MDIO_DEV_VEND1 registers */
+	AQ_FW_VERSION	= 0x0020,
+	AQ_IFLAG_GLOBAL	= 0xfc00,
+	AQ_IMASK_GLOBAL	= 0xff00,
+};
+
+enum {
+	IMASK_PMA	= 1 << 2,
+	IMASK_GLOBAL	= 1 << 15,
+	ADV_1G_FULL	= 1 << 15,
+	ADV_1G_HALF	= 1 << 14,
+	ADV_10G_FULL	= 1 << 12,
+	AQ_RESET	= (1 << 14) | (1 << 15),
+	AQ_LOWPOWER	= 1 << 12,
+};
+
+static int aq100x_reset(struct cphy *phy, int wait)
+{
+	/*
+	 * Ignore the caller specified wait time; always wait for the reset to
+	 * complete. Can take up to 3s.
+	 */
+	int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000);
+
+	if (err)
+		CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n",
+			phy->mdio.prtad, err);
+
+	return err;
+}
+
+static int aq100x_intr_enable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AQ_IMASK_PMA, IMASK_PMA);
+	if (err)
+		return err;
+
+	err = t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, IMASK_GLOBAL);
+	return err;
+}
+
+static int aq100x_intr_disable(struct cphy *phy)
+{
+	return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0);
+}
+
+static int aq100x_intr_clear(struct cphy *phy)
+{
+	unsigned int v;
+
+	t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &v);
+	t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
+
+	return 0;
+}
+
+static int aq100x_intr_handler(struct cphy *phy)
+{
+	int err;
+	unsigned int cause, v;
+
+	err = t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &cause);
+	if (err)
+		return err;
+
+	/* Read (and reset) the latching version of the status */
+	t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
+
+	return cphy_cause_link_change;
+}
+
+static int aq100x_power_down(struct cphy *phy, int off)
+{
+	return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+			     MDIO_MMD_PMAPMD, MDIO_CTRL1,
+			     MDIO_CTRL1_LPOWER, off);
+}
+
+static int aq100x_autoneg_enable(struct cphy *phy)
+{
+	int err;
+
+	err = aq100x_power_down(phy, 0);
+	if (!err)
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_AN, MDIO_CTRL1,
+				    BMCR_ANENABLE | BMCR_ANRESTART, 1);
+
+	return err;
+}
+
+static int aq100x_autoneg_restart(struct cphy *phy)
+{
+	int err;
+
+	err = aq100x_power_down(phy, 0);
+	if (!err)
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_AN, MDIO_CTRL1,
+				    BMCR_ANENABLE | BMCR_ANRESTART, 1);
+
+	return err;
+}
+
+static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
+{
+	unsigned int adv;
+	int err;
+
+	/* 10G advertisement */
+	adv = 0;
+	if (advertise_map & ADVERTISED_10000baseT_Full)
+		adv |= ADV_10G_FULL;
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				  ADV_10G_FULL, adv);
+	if (err)
+		return err;
+
+	/* 1G advertisement */
+	adv = 0;
+	if (advertise_map & ADVERTISED_1000baseT_Full)
+		adv |= ADV_1G_FULL;
+	if (advertise_map & ADVERTISED_1000baseT_Half)
+		adv |= ADV_1G_HALF;
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_1G_CTRL,
+				  ADV_1G_FULL | ADV_1G_HALF, adv);
+	if (err)
+		return err;
+
+	/* 100M, pause advertisement */
+	adv = 0;
+	if (advertise_map & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise_map & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	if (advertise_map & ADVERTISED_Pause)
+		adv |= ADVERTISE_PAUSE_CAP;
+	if (advertise_map & ADVERTISED_Asym_Pause)
+		adv |= ADVERTISE_PAUSE_ASYM;
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+				  0xfe0, adv);
+
+	return err;
+}
+
+static int aq100x_set_loopback(struct cphy *phy, int mmd, int dir, int enable)
+{
+	return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+			     MDIO_MMD_PMAPMD, MDIO_CTRL1,
+			     BMCR_LOOPBACK, enable);
+}
+
+static int aq100x_set_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+	/* no can do */
+	return -1;
+}
+
+static int aq100x_get_link_status(struct cphy *phy, int *link_ok,
+				  int *speed, int *duplex, int *fc)
+{
+	int err;
+	unsigned int v;
+
+	if (link_ok) {
+		err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AQ_LINK_STAT, &v);
+		if (err)
+			return err;
+
+		*link_ok = v & 1;
+		if (!*link_ok)
+			return 0;
+	}
+
+	err = t3_mdio_read(phy, MDIO_MMD_AN, AQ_ANEG_STAT, &v);
+	if (err)
+		return err;
+
+	if (speed) {
+		switch (v & 0x6) {
+		case 0x6:
+			*speed = SPEED_10000;
+			break;
+		case 0x4:
+			*speed = SPEED_1000;
+			break;
+		case 0x2:
+			*speed = SPEED_100;
+			break;
+		case 0x0:
+			*speed = SPEED_10;
+			break;
+		}
+	}
+
+	if (duplex)
+		*duplex = v & 1 ? DUPLEX_FULL : DUPLEX_HALF;
+
+	return 0;
+}
+
+static struct cphy_ops aq100x_ops = {
+	.reset             = aq100x_reset,
+	.intr_enable       = aq100x_intr_enable,
+	.intr_disable      = aq100x_intr_disable,
+	.intr_clear        = aq100x_intr_clear,
+	.intr_handler      = aq100x_intr_handler,
+	.autoneg_enable    = aq100x_autoneg_enable,
+	.autoneg_restart   = aq100x_autoneg_restart,
+	.advertise         = aq100x_advertise,
+	.set_loopback      = aq100x_set_loopback,
+	.set_speed_duplex  = aq100x_set_speed_duplex,
+	.get_link_status   = aq100x_get_link_status,
+	.power_down        = aq100x_power_down,
+	.mmds 		   = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+		       const struct mdio_ops *mdio_ops)
+{
+	unsigned int v, v2, gpio, wait;
+	int err;
+
+	cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops,
+		  SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full |
+		  SUPPORTED_Autoneg | SUPPORTED_AUI, "1000/10GBASE-T");
+
+	/*
+	 * The PHY has been out of reset ever since the system powered up.  So
+	 * we do a hard reset over here.
+	 */
+	gpio = phy_addr ? F_GPIO10_OUT_VAL : F_GPIO6_OUT_VAL;
+	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0);
+	msleep(1);
+	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, gpio);
+
+	/*
+	 * Give it enough time to load the firmware and get ready for mdio.
+	 */
+	msleep(1000);
+	wait = 500; /* in 10ms increments */
+	do {
+		err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
+		if (err || v == 0xffff) {
+
+			/* Allow prep_adapter to succeed when ffff is read */
+
+			CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n",
+				phy_addr, err, v);
+			goto done;
+		}
+
+		v &= AQ_RESET;
+		if (v)
+			msleep(10);
+	} while (v && --wait);
+	if (v) {
+		CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n",
+			phy_addr, v);
+
+		goto done; /* let prep_adapter succeed */
+	}
+
+	/* Datasheet says 3s max but this has been observed */
+	wait = (500 - wait) * 10 + 1000;
+	if (wait > 3000)
+		CH_WARN(adapter, "PHY%d: reset took %ums\n", phy_addr, wait);
+
+	/* Firmware version check. */
+	t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v);
+	if (v != 30) {
+		CH_WARN(adapter, "PHY%d: unsupported firmware %d\n",
+			phy_addr, v);
+		return 0; /* allow t3_prep_adapter to succeed */
+	}
+
+	/*
+	 * The PHY should start in really-low-power mode.  Prepare it for normal
+	 * operations.
+	 */
+	err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
+	if (err)
+		return err;
+	if (v & AQ_LOWPOWER) {
+		err = t3_mdio_change_bits(phy, MDIO_MMD_VEND1, MDIO_CTRL1,
+					  AQ_LOWPOWER, 0);
+		if (err)
+			return err;
+		msleep(10);
+	} else
+		CH_WARN(adapter, "PHY%d does not start in low power mode.\n",
+			phy_addr);
+
+	/*
+	 * Verify XAUI settings, but let prep succeed no matter what.
+	 */
+	v = v2 = 0;
+	t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_RX_CFG, &v);
+	t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_TX_CFG, &v2);
+	if (v != 0x1b || v2 != 0x1b)
+		CH_WARN(adapter,
+			"PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n",
+			phy_addr, v, v2);
+
+done:
+	return err;
+}
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index e508dc32f3e..d21b705501a 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -39,7 +39,7 @@
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include "version.h"
 
 #define CH_ERR(adap, fmt, ...)   dev_err(&adap->pdev->dev, fmt, ## __VA_ARGS__)
@@ -184,10 +184,11 @@ struct cphy;
 struct adapter;
 
 struct mdio_ops {
-	int (*read)(struct adapter *adapter, int phy_addr, int mmd_addr,
-		    int reg_addr, unsigned int *val);
-	int (*write)(struct adapter *adapter, int phy_addr, int mmd_addr,
-		     int reg_addr, unsigned int val);
+	int (*read)(struct net_device *dev, int phy_addr, int mmd_addr,
+		    u16 reg_addr);
+	int (*write)(struct net_device *dev, int phy_addr, int mmd_addr,
+		     u16 reg_addr, u16 val);
+	unsigned mode_support;
 };
 
 struct adapter_info {
@@ -520,27 +521,6 @@ enum {
 	MAC_RXFIFO_SIZE = 32768
 };
 
-/* IEEE 802.3 specified MDIO devices */
-enum {
-	MDIO_DEV_PMA_PMD = 1,
-	MDIO_DEV_WIS = 2,
-	MDIO_DEV_PCS = 3,
-	MDIO_DEV_XGXS = 4,
-	MDIO_DEV_ANEG = 7,
-	MDIO_DEV_VEND1 = 30,
-	MDIO_DEV_VEND2 = 31
-};
-
-/* LASI control and status registers */
-enum {
-	RX_ALARM_CTRL = 0x9000,
-	TX_ALARM_CTRL = 0x9001,
-	LASI_CTRL = 0x9002,
-	RX_ALARM_STAT = 0x9003,
-	TX_ALARM_STAT = 0x9004,
-	LASI_STAT = 0x9005
-};
-
 /* PHY loopback direction */
 enum {
 	PHY_LOOPBACK_TX = 1,
@@ -583,11 +563,12 @@ struct cphy_ops {
 	int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
 			       int *duplex, int *fc);
 	int (*power_down)(struct cphy *phy, int enable);
+
+	u32 mmds;
 };
 
 /* A PHY instance */
 struct cphy {
-	u8 addr;			/* PHY address */
 	u8 modtype;			/* PHY module type */
 	short priv;			/* scratch pad */
 	unsigned int caps;		/* PHY capabilities */
@@ -595,23 +576,23 @@ struct cphy {
 	const char *desc;		/* PHY description */
 	unsigned long fifo_errors;	/* FIFO over/under-flows */
 	const struct cphy_ops *ops;	/* PHY operations */
-	int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int *val);
-	int (*mdio_write)(struct adapter *adapter, int phy_addr, int mmd_addr,
-			  int reg_addr, unsigned int val);
+	struct mdio_if_info mdio;
 };
 
 /* Convenience MDIO read/write wrappers */
-static inline int mdio_read(struct cphy *phy, int mmd, int reg,
-			    unsigned int *valp)
+static inline int t3_mdio_read(struct cphy *phy, int mmd, int reg,
+			       unsigned int *valp)
 {
-	return phy->mdio_read(phy->adapter, phy->addr, mmd, reg, valp);
+	int rc = phy->mdio.mdio_read(phy->mdio.dev, phy->mdio.prtad, mmd, reg);
+	*valp = (rc >= 0) ? rc : -1;
+	return (rc >= 0) ? 0 : rc;
 }
 
-static inline int mdio_write(struct cphy *phy, int mmd, int reg,
-			     unsigned int val)
+static inline int t3_mdio_write(struct cphy *phy, int mmd, int reg,
+				unsigned int val)
 {
-	return phy->mdio_write(phy->adapter, phy->addr, mmd, reg, val);
+	return phy->mdio.mdio_write(phy->mdio.dev, phy->mdio.prtad, mmd,
+				    reg, val);
 }
 
 /* Convenience initializer */
@@ -620,14 +601,16 @@ static inline void cphy_init(struct cphy *phy, struct adapter *adapter,
 			     const struct mdio_ops *mdio_ops,
 			      unsigned int caps, const char *desc)
 {
-	phy->addr = phy_addr;
 	phy->caps = caps;
 	phy->adapter = adapter;
 	phy->desc = desc;
 	phy->ops = phy_ops;
 	if (mdio_ops) {
-		phy->mdio_read = mdio_ops->read;
-		phy->mdio_write = mdio_ops->write;
+		phy->mdio.prtad = phy_addr;
+		phy->mdio.mmds = phy_ops->mmds;
+		phy->mdio.mode_support = mdio_ops->mode_support;
+		phy->mdio.mdio_read = mdio_ops->read;
+		phy->mdio.mdio_write = mdio_ops->write;
 	}
 }
 
@@ -819,8 +802,12 @@ int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops);
 int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops);
+int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter,
+			int phy_addr, const struct mdio_ops *mdio_ops);
 int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
 		       const struct mdio_ops *mdio_ops);
 int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
 			    int phy_addr, const struct mdio_ops *mdio_ops);
+int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter,
+			    int phy_addr, const struct mdio_ops *mdio_ops);
 #endif				/* __CHELSIO_COMMON_H */
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 17858b9a583..538dda4422d 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -37,7 +37,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/if_vlan.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include <linux/sockios.h>
 #include <linux/workqueue.h>
 #include <linux/proc_fs.h>
@@ -91,6 +91,8 @@ static const struct pci_device_id cxgb3_pci_tbl[] = {
 	CH_DEVICE(0x31, 3),	/* T3B20 */
 	CH_DEVICE(0x32, 1),	/* T3B02 */
 	CH_DEVICE(0x35, 6),	/* T3C20-derived T3C10 */
+	CH_DEVICE(0x36, 3),	/* S320E-CR */
+	CH_DEVICE(0x37, 7),	/* N320E-G2 */
 	{0,}
 };
 
@@ -431,40 +433,78 @@ static int init_tp_parity(struct adapter *adap)
 	for (i = 0; i < 16; i++) {
 		struct cpl_smt_write_req *req;
 
-		skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+		if (!skb)
+			skb = adap->nofail_skb;
+		if (!skb)
+			goto alloc_skb_fail;
+
 		req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req));
 		memset(req, 0, sizeof(*req));
 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, i));
 		req->iff = i;
 		t3_mgmt_tx(adap, skb);
+		if (skb == adap->nofail_skb) {
+			await_mgmt_replies(adap, cnt, i + 1);
+			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+			if (!adap->nofail_skb)
+				goto alloc_skb_fail;
+		}
 	}
 
 	for (i = 0; i < 2048; i++) {
 		struct cpl_l2t_write_req *req;
 
-		skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+		if (!skb)
+			skb = adap->nofail_skb;
+		if (!skb)
+			goto alloc_skb_fail;
+
 		req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req));
 		memset(req, 0, sizeof(*req));
 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, i));
 		req->params = htonl(V_L2T_W_IDX(i));
 		t3_mgmt_tx(adap, skb);
+		if (skb == adap->nofail_skb) {
+			await_mgmt_replies(adap, cnt, 16 + i + 1);
+			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+			if (!adap->nofail_skb)
+				goto alloc_skb_fail;
+		}
 	}
 
 	for (i = 0; i < 2048; i++) {
 		struct cpl_rte_write_req *req;
 
-		skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+		if (!skb)
+			skb = adap->nofail_skb;
+		if (!skb)
+			goto alloc_skb_fail;
+
 		req = (struct cpl_rte_write_req *)__skb_put(skb, sizeof(*req));
 		memset(req, 0, sizeof(*req));
 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RTE_WRITE_REQ, i));
 		req->l2t_idx = htonl(V_L2T_W_IDX(i));
 		t3_mgmt_tx(adap, skb);
+		if (skb == adap->nofail_skb) {
+			await_mgmt_replies(adap, cnt, 16 + 2048 + i + 1);
+			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+			if (!adap->nofail_skb)
+				goto alloc_skb_fail;
+		}
 	}
 
-	skb = alloc_skb(sizeof(*greq), GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+	if (!skb)
+		skb = adap->nofail_skb;
+	if (!skb)
+		goto alloc_skb_fail;
+
 	greq = (struct cpl_set_tcb_field *)__skb_put(skb, sizeof(*greq));
 	memset(greq, 0, sizeof(*greq));
 	greq->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
@@ -473,8 +513,17 @@ static int init_tp_parity(struct adapter *adap)
 	t3_mgmt_tx(adap, skb);
 
 	i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1);
+	if (skb == adap->nofail_skb) {
+		i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1);
+		adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+	}
+
 	t3_tp_set_offload_mode(adap, 0);
 	return i;
+
+alloc_skb_fail:
+	t3_tp_set_offload_mode(adap, 0);
+	return -ENOMEM;
 }
 
 /**
@@ -869,7 +918,12 @@ static int send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo,
 	struct mngt_pktsched_wr *req;
 	int ret;
 
-	skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+	if (!skb)
+		skb = adap->nofail_skb;
+	if (!skb)
+		return -ENOMEM;
+
 	req = (struct mngt_pktsched_wr *)skb_put(skb, sizeof(*req));
 	req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT));
 	req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET;
@@ -879,6 +933,12 @@ static int send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo,
 	req->max = hi;
 	req->binding = port;
 	ret = t3_mgmt_tx(adap, skb);
+	if (skb == adap->nofail_skb) {
+		adap->nofail_skb = alloc_skb(sizeof(struct cpl_set_tcb_field),
+					     GFP_KERNEL);
+		if (!adap->nofail_skb)
+			ret = -ENOMEM;
+	}
 
 	return ret;
 }
@@ -1593,7 +1653,7 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
-	cmd->phy_address = p->phy.addr;
+	cmd->phy_address = p->phy.mdio.prtad;
 	cmd->transceiver = XCVR_EXTERNAL;
 	cmd->autoneg = p->link_config.autoneg;
 	cmd->maxtxpkt = 0;
@@ -2308,70 +2368,25 @@ static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 	struct mii_ioctl_data *data = if_mii(req);
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
-	int ret, mmd;
 
 	switch (cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = pi->phy.addr;
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		/* Convert phy_id from older PRTAD/DEVAD format */
+		if (is_10G(adapter) &&
+		    !mdio_phy_id_is_c45(data->phy_id) &&
+		    (data->phy_id & 0x1f00) &&
+		    !(data->phy_id & 0xe0e0))
+			data->phy_id = mdio_phy_id_c45(data->phy_id >> 8,
+						       data->phy_id & 0x1f);
 		/* FALLTHRU */
-	case SIOCGMIIREG:{
-		u32 val;
-		struct cphy *phy = &pi->phy;
-
-		if (!phy->mdio_read)
-			return -EOPNOTSUPP;
-		if (is_10G(adapter)) {
-			mmd = data->phy_id >> 8;
-			if (!mmd)
-				mmd = MDIO_DEV_PCS;
-			else if (mmd > MDIO_DEV_VEND2)
-				return -EINVAL;
-
-			ret =
-				phy->mdio_read(adapter, data->phy_id & 0x1f,
-						mmd, data->reg_num, &val);
-		} else
-			ret =
-				phy->mdio_read(adapter, data->phy_id & 0x1f,
-						0, data->reg_num & 0x1f,
-						&val);
-		if (!ret)
-			data->val_out = val;
-		break;
-	}
-	case SIOCSMIIREG:{
-		struct cphy *phy = &pi->phy;
-
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		if (!phy->mdio_write)
-			return -EOPNOTSUPP;
-		if (is_10G(adapter)) {
-			mmd = data->phy_id >> 8;
-			if (!mmd)
-				mmd = MDIO_DEV_PCS;
-			else if (mmd > MDIO_DEV_VEND2)
-				return -EINVAL;
-
-			ret =
-				phy->mdio_write(adapter,
-						data->phy_id & 0x1f, mmd,
-						data->reg_num,
-						data->val_in);
-		} else
-			ret =
-				phy->mdio_write(adapter,
-						data->phy_id & 0x1f, 0,
-						data->reg_num & 0x1f,
-						data->val_in);
-		break;
-	}
+	case SIOCGMIIPHY:
+		return mdio_mii_ioctl(&pi->phy.mdio, data, cmd);
 	case SIOCCHIOCTL:
 		return cxgb_extension_ioctl(dev, req->ifr_data);
 	default:
 		return -EOPNOTSUPP;
 	}
-	return ret;
 }
 
 static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
@@ -3063,6 +3078,14 @@ static int __devinit init_one(struct pci_dev *pdev,
 		goto out_disable_device;
 	}
 
+	adapter->nofail_skb =
+		alloc_skb(sizeof(struct cpl_set_tcb_field), GFP_KERNEL);
+	if (!adapter->nofail_skb) {
+		dev_err(&pdev->dev, "cannot allocate nofail buffer\n");
+		err = -ENOMEM;
+		goto out_free_adapter;
+	}
+
 	adapter->regs = ioremap_nocache(mmio_start, mmio_len);
 	if (!adapter->regs) {
 		dev_err(&pdev->dev, "cannot map device registers\n");
@@ -3106,7 +3129,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 		netdev->mem_start = mmio_start;
 		netdev->mem_end = mmio_start + mmio_len - 1;
 		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-		netdev->features |= NETIF_F_LLTX;
 		netdev->features |= NETIF_F_GRO;
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
@@ -3220,6 +3242,8 @@ static void __devexit remove_one(struct pci_dev *pdev)
 				free_netdev(adapter->port[i]);
 
 		iounmap(adapter->regs);
+		if (adapter->nofail_skb)
+			kfree_skb(adapter->nofail_skb);
 		kfree(adapter);
 		pci_release_regions(pdev);
 		pci_disable_device(pdev);
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index 620d80be6aa..f9f54b57b28 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -566,13 +566,31 @@ static void t3_process_tid_release_list(struct work_struct *work)
 		spin_unlock_bh(&td->tid_release_lock);
 
 		skb = alloc_skb(sizeof(struct cpl_tid_release),
-				GFP_KERNEL | __GFP_NOFAIL);
+				GFP_KERNEL);
+		if (!skb)
+			skb = td->nofail_skb;
+		if (!skb) {
+			spin_lock_bh(&td->tid_release_lock);
+			p->ctx = (void *)td->tid_release_list;
+			td->tid_release_list = (struct t3c_tid_entry *)p;
+			break;
+		}
 		mk_tid_release(skb, p - td->tid_maps.tid_tab);
 		cxgb3_ofld_send(tdev, skb);
 		p->ctx = NULL;
+		if (skb == td->nofail_skb)
+			td->nofail_skb =
+				alloc_skb(sizeof(struct cpl_tid_release),
+					GFP_KERNEL);
 		spin_lock_bh(&td->tid_release_lock);
 	}
+	td->release_list_incomplete = (td->tid_release_list == NULL) ? 0 : 1;
 	spin_unlock_bh(&td->tid_release_lock);
+
+	if (!td->nofail_skb)
+		td->nofail_skb =
+			alloc_skb(sizeof(struct cpl_tid_release),
+				GFP_KERNEL);
 }
 
 /* use ctx as a next pointer in the tid release list */
@@ -585,7 +603,7 @@ void cxgb3_queue_tid_release(struct t3cdev *tdev, unsigned int tid)
 	p->ctx = (void *)td->tid_release_list;
 	p->client = NULL;
 	td->tid_release_list = p;
-	if (!p->ctx)
+	if (!p->ctx || td->release_list_incomplete)
 		schedule_work(&td->tid_release_task);
 	spin_unlock_bh(&td->tid_release_lock);
 }
@@ -1274,6 +1292,9 @@ int cxgb3_offload_activate(struct adapter *adapter)
 	if (list_empty(&adapter_list))
 		register_netevent_notifier(&nb);
 
+	t->nofail_skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_KERNEL);
+	t->release_list_incomplete = 0;
+
 	add_adapter(adapter);
 	return 0;
 
@@ -1298,6 +1319,8 @@ void cxgb3_offload_deactivate(struct adapter *adapter)
 	T3C_DATA(tdev) = NULL;
 	t3_free_l2t(L2DATA(tdev));
 	L2DATA(tdev) = NULL;
+	if (t->nofail_skb)
+		kfree_skb(t->nofail_skb);
 	kfree(t);
 }
 
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h
index a8e8e5fcdf8..55945f422ae 100644
--- a/drivers/net/cxgb3/cxgb3_offload.h
+++ b/drivers/net/cxgb3/cxgb3_offload.h
@@ -191,6 +191,9 @@ struct t3c_data {
 	struct t3c_tid_entry *tid_release_list;
 	spinlock_t tid_release_lock;
 	struct work_struct tid_release_task;
+
+	struct sk_buff *nofail_skb;
+	unsigned int release_list_incomplete;
 };
 
 /*
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index b3ee2bc1a00..29c79eb43be 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -653,7 +653,8 @@ static void t3_reset_qset(struct sge_qset *q)
 	q->txq_stopped = 0;
 	q->tx_reclaim_timer.function = NULL; /* for t3_stop_sge_timers() */
 	q->rx_reclaim_timer.function = NULL;
-	q->lro_frag_tbl.nr_frags = q->lro_frag_tbl.len = 0;
+	q->nomem = 0;
+	napi_free_frags(&q->napi);
 }
 
 
@@ -1239,7 +1240,6 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	q = &qs->txq[TXQ_ETH];
 	txq = netdev_get_tx_queue(dev, qidx);
 
-	spin_lock(&q->lock);
 	reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
 
 	credits = q->size - q->in_use;
@@ -1250,7 +1250,6 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev_err(&adap->pdev->dev,
 			"%s: Tx ring %u full while queue awake!\n",
 			dev->name, q->cntxt_id & 7);
-		spin_unlock(&q->lock);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1284,9 +1283,6 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (vlan_tx_tag_present(skb) && pi->vlan_grp)
 		qs->port_stats[SGE_PSTAT_VLANINS]++;
 
-	dev->trans_start = jiffies;
-	spin_unlock(&q->lock);
-
 	/*
 	 * We do not use Tx completion interrupts to free DMAd Tx packets.
 	 * This is good for performamce but means that we rely on new Tx
@@ -2073,20 +2069,19 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 			 struct sge_fl *fl, int len, int complete)
 {
 	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+	struct sk_buff *skb = NULL;
 	struct cpl_rx_pkt *cpl;
-	struct skb_frag_struct *rx_frag = qs->lro_frag_tbl.frags;
-	int nr_frags = qs->lro_frag_tbl.nr_frags;
-	int frag_len = qs->lro_frag_tbl.len;
+	struct skb_frag_struct *rx_frag;
+	int nr_frags;
 	int offset = 0;
 
-	if (!nr_frags) {
-		offset = 2 + sizeof(struct cpl_rx_pkt);
-		qs->lro_va = cpl = sd->pg_chunk.va + 2;
+	if (!qs->nomem) {
+		skb = napi_get_frags(&qs->napi);
+		qs->nomem = !skb;
 	}
 
 	fl->credits--;
 
-	len -= offset;
 	pci_dma_sync_single_for_cpu(adap->pdev,
 				    pci_unmap_addr(sd, dma_addr),
 				    fl->buf_size - SGE_PG_RSVD,
@@ -2099,21 +2094,38 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 			       fl->alloc_size,
 			       PCI_DMA_FROMDEVICE);
 
+	if (!skb) {
+		put_page(sd->pg_chunk.page);
+		if (complete)
+			qs->nomem = 0;
+		return;
+	}
+
+	rx_frag = skb_shinfo(skb)->frags;
+	nr_frags = skb_shinfo(skb)->nr_frags;
+
+	if (!nr_frags) {
+		offset = 2 + sizeof(struct cpl_rx_pkt);
+		qs->lro_va = sd->pg_chunk.va + 2;
+	}
+	len -= offset;
+
 	prefetch(qs->lro_va);
 
 	rx_frag += nr_frags;
 	rx_frag->page = sd->pg_chunk.page;
 	rx_frag->page_offset = sd->pg_chunk.offset + offset;
 	rx_frag->size = len;
-	frag_len += len;
-	qs->lro_frag_tbl.nr_frags++;
-	qs->lro_frag_tbl.len = frag_len;
 
+	skb->len += len;
+	skb->data_len += len;
+	skb->truesize += len;
+	skb_shinfo(skb)->nr_frags++;
 
 	if (!complete)
 		return;
 
-	qs->lro_frag_tbl.ip_summed = CHECKSUM_UNNECESSARY;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	cpl = qs->lro_va;
 
 	if (unlikely(cpl->vlan_valid)) {
@@ -2122,15 +2134,11 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 		struct vlan_group *grp = pi->vlan_grp;
 
 		if (likely(grp != NULL)) {
-			vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan),
-				       &qs->lro_frag_tbl);
-			goto out;
+			vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan));
+			return;
 		}
 	}
-	napi_gro_frags(&qs->napi, &qs->lro_frag_tbl);
-
-out:
-	qs->lro_frag_tbl.nr_frags = qs->lro_frag_tbl.len = 0;
+	napi_gro_frags(&qs->napi);
 }
 
 /**
@@ -2299,8 +2307,6 @@ no_mem:
 			if (fl->use_pages) {
 				void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
 
-				prefetch(&qs->lro_frag_tbl);
-
 				prefetch(addr);
 #if L1_CACHE_BYTES < 128
 				prefetch(addr + L1_CACHE_BYTES);
@@ -2846,11 +2852,12 @@ static void sge_timer_tx(unsigned long data)
 	unsigned int tbd[SGE_TXQ_PER_SET] = {0, 0};
 	unsigned long next_period;
 
-	if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
-		tbd[TXQ_ETH] = reclaim_completed_tx(adap, &qs->txq[TXQ_ETH],
-						    TX_RECLAIM_TIMER_CHUNK);
-		spin_unlock(&qs->txq[TXQ_ETH].lock);
+	if (__netif_tx_trylock(qs->tx_q)) {
+                tbd[TXQ_ETH] = reclaim_completed_tx(adap, &qs->txq[TXQ_ETH],
+                                                     TX_RECLAIM_TIMER_CHUNK);
+		__netif_tx_unlock(qs->tx_q);
 	}
+
 	if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
 		tbd[TXQ_OFLD] = reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD],
 						     TX_RECLAIM_TIMER_CHUNK);
@@ -2858,8 +2865,8 @@ static void sge_timer_tx(unsigned long data)
 	}
 
 	next_period = TX_RECLAIM_PERIOD >>
-		      (max(tbd[TXQ_ETH], tbd[TXQ_OFLD]) /
-		       TX_RECLAIM_TIMER_CHUNK);
+                      (max(tbd[TXQ_ETH], tbd[TXQ_OFLD]) /
+                      TX_RECLAIM_TIMER_CHUNK);
 	mod_timer(&qs->tx_reclaim_timer, jiffies + next_period);
 }
 
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 4950d5d789a..870d44992c7 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -204,35 +204,33 @@ static void mi1_init(struct adapter *adap, const struct adapter_info *ai)
 /*
  * MI1 read/write operations for clause 22 PHYs.
  */
-static int t3_mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
-		       int reg_addr, unsigned int *valp)
+static int t3_mi1_read(struct net_device *dev, int phy_addr, int mmd_addr,
+		       u16 reg_addr)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 	u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
 
-	if (mmd_addr)
-		return -EINVAL;
-
 	mutex_lock(&adapter->mdio_lock);
 	t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
 	t3_write_reg(adapter, A_MI1_ADDR, addr);
 	t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2));
 	ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10);
 	if (!ret)
-		*valp = t3_read_reg(adapter, A_MI1_DATA);
+		ret = t3_read_reg(adapter, A_MI1_DATA);
 	mutex_unlock(&adapter->mdio_lock);
 	return ret;
 }
 
-static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
-		     int reg_addr, unsigned int val)
+static int t3_mi1_write(struct net_device *dev, int phy_addr, int mmd_addr,
+			u16 reg_addr, u16 val)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 	u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
 
-	if (mmd_addr)
-		return -EINVAL;
-
 	mutex_lock(&adapter->mdio_lock);
 	t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
 	t3_write_reg(adapter, A_MI1_ADDR, addr);
@@ -244,8 +242,9 @@ static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
 }
 
 static const struct mdio_ops mi1_mdio_ops = {
-	t3_mi1_read,
-	t3_mi1_write
+	.read = t3_mi1_read,
+	.write = t3_mi1_write,
+	.mode_support = MDIO_SUPPORTS_C22
 };
 
 /*
@@ -268,9 +267,11 @@ static int mi1_wr_addr(struct adapter *adapter, int phy_addr, int mmd_addr,
 /*
  * MI1 read/write operations for indirect-addressed PHYs.
  */
-static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
-			int reg_addr, unsigned int *valp)
+static int mi1_ext_read(struct net_device *dev, int phy_addr, int mmd_addr,
+			u16 reg_addr)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 
 	mutex_lock(&adapter->mdio_lock);
@@ -280,15 +281,17 @@ static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
 		ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
 				      MDIO_ATTEMPTS, 10);
 		if (!ret)
-			*valp = t3_read_reg(adapter, A_MI1_DATA);
+			ret = t3_read_reg(adapter, A_MI1_DATA);
 	}
 	mutex_unlock(&adapter->mdio_lock);
 	return ret;
 }
 
-static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int val)
+static int mi1_ext_write(struct net_device *dev, int phy_addr, int mmd_addr,
+			 u16 reg_addr, u16 val)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 
 	mutex_lock(&adapter->mdio_lock);
@@ -304,8 +307,9 @@ static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
 }
 
 static const struct mdio_ops mi1_mdio_ext_ops = {
-	mi1_ext_read,
-	mi1_ext_write
+	.read = mi1_ext_read,
+	.write = mi1_ext_write,
+	.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22
 };
 
 /**
@@ -325,10 +329,10 @@ int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear,
 	int ret;
 	unsigned int val;
 
-	ret = mdio_read(phy, mmd, reg, &val);
+	ret = t3_mdio_read(phy, mmd, reg, &val);
 	if (!ret) {
 		val &= ~clear;
-		ret = mdio_write(phy, mmd, reg, val | set);
+		ret = t3_mdio_write(phy, mmd, reg, val | set);
 	}
 	return ret;
 }
@@ -348,15 +352,16 @@ int t3_phy_reset(struct cphy *phy, int mmd, int wait)
 	int err;
 	unsigned int ctl;
 
-	err = t3_mdio_change_bits(phy, mmd, MII_BMCR, BMCR_PDOWN, BMCR_RESET);
+	err = t3_mdio_change_bits(phy, mmd, MDIO_CTRL1, MDIO_CTRL1_LPOWER,
+				  MDIO_CTRL1_RESET);
 	if (err || !wait)
 		return err;
 
 	do {
-		err = mdio_read(phy, mmd, MII_BMCR, &ctl);
+		err = t3_mdio_read(phy, mmd, MDIO_CTRL1, &ctl);
 		if (err)
 			return err;
-		ctl &= BMCR_RESET;
+		ctl &= MDIO_CTRL1_RESET;
 		if (ctl)
 			msleep(1);
 	} while (ctl && --wait);
@@ -377,7 +382,7 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
 	int err;
 	unsigned int val = 0;
 
-	err = mdio_read(phy, 0, MII_CTRL1000, &val);
+	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, MII_CTRL1000, &val);
 	if (err)
 		return err;
 
@@ -387,7 +392,7 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
 	if (advert & ADVERTISED_1000baseT_Full)
 		val |= ADVERTISE_1000FULL;
 
-	err = mdio_write(phy, 0, MII_CTRL1000, val);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_CTRL1000, val);
 	if (err)
 		return err;
 
@@ -404,7 +409,7 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
 		val |= ADVERTISE_PAUSE_CAP;
 	if (advert & ADVERTISED_Asym_Pause)
 		val |= ADVERTISE_PAUSE_ASYM;
-	return mdio_write(phy, 0, MII_ADVERTISE, val);
+	return t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_ADVERTISE, val);
 }
 
 /**
@@ -427,7 +432,7 @@ int t3_phy_advertise_fiber(struct cphy *phy, unsigned int advert)
 		val |= ADVERTISE_1000XPAUSE;
 	if (advert & ADVERTISED_Asym_Pause)
 		val |= ADVERTISE_1000XPSE_ASYM;
-	return mdio_write(phy, 0, MII_ADVERTISE, val);
+	return t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_ADVERTISE, val);
 }
 
 /**
@@ -444,7 +449,7 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
 	int err;
 	unsigned int ctl;
 
-	err = mdio_read(phy, 0, MII_BMCR, &ctl);
+	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, MII_BMCR, &ctl);
 	if (err)
 		return err;
 
@@ -462,34 +467,36 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
 	}
 	if (ctl & BMCR_SPEED1000) /* auto-negotiation required for GigE */
 		ctl |= BMCR_ANENABLE;
-	return mdio_write(phy, 0, MII_BMCR, ctl);
+	return t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_BMCR, ctl);
 }
 
 int t3_phy_lasi_intr_enable(struct cphy *phy)
 {
-	return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1);
+	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			     MDIO_PMA_LASI_LSALARM);
 }
 
 int t3_phy_lasi_intr_disable(struct cphy *phy)
 {
-	return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0);
+	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0);
 }
 
 int t3_phy_lasi_intr_clear(struct cphy *phy)
 {
 	u32 val;
 
-	return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val);
+	return t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 }
 
 int t3_phy_lasi_intr_handler(struct cphy *phy)
 {
 	unsigned int status;
-	int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status);
+	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT,
+			       &status);
 
 	if (err)
 		return err;
-	return (status & 1) ?  cphy_cause_link_change : 0;
+	return (status & MDIO_PMA_LASI_LSALARM) ? cphy_cause_link_change : 0;
 }
 
 static const struct adapter_info t3_adap_info[] = {
@@ -519,6 +526,11 @@ static const struct adapter_info t3_adap_info[] = {
 	 F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
 	 { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
 	 &mi1_mdio_ext_ops, "Chelsio T310" },
+	{1, 0, 0,
+	 F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN |
+	 F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL,
+	 { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+	 &mi1_mdio_ext_ops, "Chelsio N320E-G2" },
 };
 
 /*
@@ -545,6 +557,8 @@ static const struct port_type_info port_types[] = {
 	{ t3_qt2045_phy_prep },
 	{ t3_ael1006_phy_prep },
 	{ NULL },
+	{ t3_aq100x_phy_prep },
+	{ t3_ael2020_phy_prep },
 };
 
 #define VPD_ENTRY(name, len) \
@@ -3864,6 +3878,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
 			return -EINVAL;
 		}
 
+		p->phy.mdio.dev = adapter->port[i];
 		ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
 				    ai->mdio_ops);
 		if (ret)
@@ -3923,7 +3938,7 @@ int t3_replay_prep_adapter(struct adapter *adapter)
 			;
 
 		pti = &port_types[adapter->params.vpd.port_type[j]];
-		ret = pti->phy_prep(&p->phy, adapter, p->phy.addr, NULL);
+		ret = pti->phy_prep(&p->phy, adapter, p->phy.mdio.prtad, NULL);
 		if (ret)
 			return ret;
 		p->phy.ops->power_down(&p->phy, 1);
diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h
index 7bf963ec554..9d0bd9dd9ab 100644
--- a/drivers/net/cxgb3/version.h
+++ b/drivers/net/cxgb3/version.h
@@ -35,10 +35,10 @@
 #define DRV_DESC "Chelsio T3 Network Driver"
 #define DRV_NAME "cxgb3"
 /* Driver version */
-#define DRV_VERSION "1.1.2-ko"
+#define DRV_VERSION "1.1.3-ko"
 
 /* Firmware version */
 #define FW_VERSION_MAJOR 7
-#define FW_VERSION_MINOR 1
+#define FW_VERSION_MINOR 4
 #define FW_VERSION_MICRO 0
 #endif				/* __CHELSIO_VERSION_H */
diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c
index d07130971b8..4f9a1c2724f 100644
--- a/drivers/net/cxgb3/vsc8211.c
+++ b/drivers/net/cxgb3/vsc8211.c
@@ -91,17 +91,18 @@ enum {
  */
 static int vsc8211_reset(struct cphy *cphy, int wait)
 {
-	return t3_phy_reset(cphy, 0, 0);
+	return t3_phy_reset(cphy, MDIO_DEVAD_NONE, 0);
 }
 
 static int vsc8211_intr_enable(struct cphy *cphy)
 {
-	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
+	return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE,
+			     INTR_MASK);
 }
 
 static int vsc8211_intr_disable(struct cphy *cphy)
 {
-	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
+	return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE, 0);
 }
 
 static int vsc8211_intr_clear(struct cphy *cphy)
@@ -109,18 +110,20 @@ static int vsc8211_intr_clear(struct cphy *cphy)
 	u32 val;
 
 	/* Clear PHY interrupts by reading the register. */
-	return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
+	return t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &val);
 }
 
 static int vsc8211_autoneg_enable(struct cphy *cphy)
 {
-	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+	return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
+				   BMCR_PDOWN | BMCR_ISOLATE,
 				   BMCR_ANENABLE | BMCR_ANRESTART);
 }
 
 static int vsc8211_autoneg_restart(struct cphy *cphy)
 {
-	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+	return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
+				   BMCR_PDOWN | BMCR_ISOLATE,
 				   BMCR_ANRESTART);
 }
 
@@ -130,9 +133,9 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 	unsigned int bmcr, status, lpa, adv;
 	int err, sp = -1, dplx = -1, pause = 0;
 
-	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
+	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 	if (!err)
-		err = mdio_read(cphy, 0, MII_BMSR, &status);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 	if (err)
 		return err;
 
@@ -142,7 +145,8 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 		 * once more to get the current link state.
 		 */
 		if (!(status & BMSR_LSTATUS))
-			err = mdio_read(cphy, 0, MII_BMSR, &status);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
+					   &status);
 		if (err)
 			return err;
 		*link_ok = (status & BMSR_LSTATUS) != 0;
@@ -156,7 +160,8 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 		else
 			sp = SPEED_10;
 	} else if (status & BMSR_ANEGCOMPLETE) {
-		err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_AUX_CTRL_STAT,
+				   &status);
 		if (err)
 			return err;
 
@@ -170,9 +175,11 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 			sp = SPEED_1000;
 
 		if (fc && dplx == DUPLEX_FULL) {
-			err = mdio_read(cphy, 0, MII_LPA, &lpa);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA,
+					   &lpa);
 			if (!err)
-				err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
+				err = t3_mdio_read(cphy, MDIO_DEVAD_NONE,
+						   MII_ADVERTISE, &adv);
 			if (err)
 				return err;
 
@@ -202,9 +209,9 @@ static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 	unsigned int bmcr, status, lpa, adv;
 	int err, sp = -1, dplx = -1, pause = 0;
 
-	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
+	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 	if (!err)
-		err = mdio_read(cphy, 0, MII_BMSR, &status);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 	if (err)
 		return err;
 
@@ -214,7 +221,8 @@ static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 		 * once more to get the current link state.
 		 */
 		if (!(status & BMSR_LSTATUS))
-			err = mdio_read(cphy, 0, MII_BMSR, &status);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
+					   &status);
 		if (err)
 			return err;
 		*link_ok = (status & BMSR_LSTATUS) != 0;
@@ -228,9 +236,10 @@ static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 		else
 			sp = SPEED_10;
 	} else if (status & BMSR_ANEGCOMPLETE) {
-		err = mdio_read(cphy, 0, MII_LPA, &lpa);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA, &lpa);
 		if (!err)
-			err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_ADVERTISE,
+					   &adv);
 		if (err)
 			return err;
 
@@ -270,23 +279,23 @@ static int vsc8211_set_automdi(struct cphy *phy, int enable)
 {
 	int err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0x52b5);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0x52b5);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, 18, 0x12);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 18, 0x12);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, 17, enable ? 0x2803 : 0x3003);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 17, enable ? 0x2803 : 0x3003);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, 16, 0x87fa);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 16, 0x87fa);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 	if (err)
 		return err;
 
@@ -315,7 +324,7 @@ static int vsc8211_intr_handler(struct cphy *cphy)
 	unsigned int cause;
 	int err, cphy_cause = 0;
 
-	err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
+	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &cause);
 	if (err)
 		return err;
 
@@ -367,12 +376,13 @@ int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 		  SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
 	msleep(20);       /* PHY needs ~10ms to start responding to MDIO */
 
-	err = mdio_read(phy, 0, VSC8211_EXT_CTRL, &val);
+	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL, &val);
 	if (err)
 		return err;
 	if (val & VSC_CTRL_MEDIA_MODE_HI) {
 		/* copper interface, just need to configure the LEDs */
-		return mdio_write(phy, 0, VSC8211_LED_CTRL, 0x100);
+		return t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_LED_CTRL,
+				     0x100);
 	}
 
 	phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
@@ -380,20 +390,20 @@ int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 	phy->desc = "1000BASE-X";
 	phy->ops = &vsc8211_fiber_ops;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 1);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 1);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_SIGDET_CTRL, 1);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_SIGDET_CTRL, 1);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_CTRL,
-			 val | VSC_CTRL_CLAUSE37_VIEW);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL,
+			    val | VSC_CTRL_CLAUSE37_VIEW);
 	if (err)
 		return err;
 
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
new file mode 100644
index 00000000000..0e9b9f9632c
--- /dev/null
+++ b/drivers/net/davinci_emac.c
@@ -0,0 +1,2830 @@
+/*
+ * DaVinci Ethernet Medium Access Controller
+ *
+ * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ---------------------------------------------------------------------------
+ * History:
+ * 0-5 A number of folks worked on this driver in bits and pieces but the major
+ *     contribution came from Suraj Iyer and Anant Gole
+ * 6.0 Anant Gole - rewrote the driver as per Linux conventions
+ * 6.1 Chaithrika U S - added support for Gigabit and RMII features,
+ *     PHY layer usage
+ */
+
+/** Pending Items in this driver:
+ * 1. Use Linux cache infrastcture for DMA'ed memory (dma_xxx functions)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/version.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+#include <linux/phy.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#include <mach/emac.h>
+
+static int debug_level;
+module_param(debug_level, int, 0);
+MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
+
+/* Netif debug messages possible */
+#define DAVINCI_EMAC_DEBUG	(NETIF_MSG_DRV | \
+				NETIF_MSG_PROBE | \
+				NETIF_MSG_LINK | \
+				NETIF_MSG_TIMER | \
+				NETIF_MSG_IFDOWN | \
+				NETIF_MSG_IFUP | \
+				NETIF_MSG_RX_ERR | \
+				NETIF_MSG_TX_ERR | \
+				NETIF_MSG_TX_QUEUED | \
+				NETIF_MSG_INTR | \
+				NETIF_MSG_TX_DONE | \
+				NETIF_MSG_RX_STATUS | \
+				NETIF_MSG_PKTDATA | \
+				NETIF_MSG_HW | \
+				NETIF_MSG_WOL)
+
+/* version info */
+#define EMAC_MAJOR_VERSION	6
+#define EMAC_MINOR_VERSION	1
+#define EMAC_MODULE_VERSION	"6.1"
+MODULE_VERSION(EMAC_MODULE_VERSION);
+static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
+
+/* Configuration items */
+#define EMAC_DEF_PASS_CRC		(0) /* Do not pass CRC upto frames */
+#define EMAC_DEF_QOS_EN			(0) /* EMAC proprietary QoS disabled */
+#define EMAC_DEF_NO_BUFF_CHAIN		(0) /* No buffer chain */
+#define EMAC_DEF_MACCTRL_FRAME_EN	(0) /* Discard Maccontrol frames */
+#define EMAC_DEF_SHORT_FRAME_EN		(0) /* Discard short frames */
+#define EMAC_DEF_ERROR_FRAME_EN		(0) /* Discard error frames */
+#define EMAC_DEF_PROM_EN		(0) /* Promiscous disabled */
+#define EMAC_DEF_PROM_CH		(0) /* Promiscous channel is 0 */
+#define EMAC_DEF_BCAST_EN		(1) /* Broadcast enabled */
+#define EMAC_DEF_BCAST_CH		(0) /* Broadcast channel is 0 */
+#define EMAC_DEF_MCAST_EN		(1) /* Multicast enabled */
+#define EMAC_DEF_MCAST_CH		(0) /* Multicast channel is 0 */
+
+#define EMAC_DEF_TXPRIO_FIXED		(1) /* TX Priority is fixed */
+#define EMAC_DEF_TXPACING_EN		(0) /* TX pacing NOT supported*/
+
+#define EMAC_DEF_BUFFER_OFFSET		(0) /* Buffer offset to DMA (future) */
+#define EMAC_DEF_MIN_ETHPKTSIZE		(60) /* Minimum ethernet pkt size */
+#define EMAC_DEF_MAX_FRAME_SIZE		(1500 + 14 + 4 + 4)
+#define EMAC_DEF_TX_CH			(0) /* Default 0th channel */
+#define EMAC_DEF_RX_CH			(0) /* Default 0th channel */
+#define EMAC_DEF_MDIO_TICK_MS		(10) /* typically 1 tick=1 ms) */
+#define EMAC_DEF_MAX_TX_CH		(1) /* Max TX channels configured */
+#define EMAC_DEF_MAX_RX_CH		(1) /* Max RX channels configured */
+#define EMAC_POLL_WEIGHT		(64) /* Default NAPI poll weight */
+
+/* Buffer descriptor parameters */
+#define EMAC_DEF_TX_MAX_SERVICE		(32) /* TX max service BD's */
+#define EMAC_DEF_RX_MAX_SERVICE		(64) /* should = netdev->weight */
+
+/* EMAC register related defines */
+#define EMAC_ALL_MULTI_REG_VALUE	(0xFFFFFFFF)
+#define EMAC_NUM_MULTICAST_BITS		(64)
+#define EMAC_TEARDOWN_VALUE		(0xFFFFFFFC)
+#define EMAC_TX_CONTROL_TX_ENABLE_VAL	(0x1)
+#define EMAC_RX_CONTROL_RX_ENABLE_VAL	(0x1)
+#define EMAC_MAC_HOST_ERR_INTMASK_VAL	(0x2)
+#define EMAC_RX_UNICAST_CLEAR_ALL	(0xFF)
+#define EMAC_INT_MASK_CLEAR		(0xFF)
+
+/* RX MBP register bit positions */
+#define EMAC_RXMBP_PASSCRC_MASK		BIT(30)
+#define EMAC_RXMBP_QOSEN_MASK		BIT(29)
+#define EMAC_RXMBP_NOCHAIN_MASK		BIT(28)
+#define EMAC_RXMBP_CMFEN_MASK		BIT(24)
+#define EMAC_RXMBP_CSFEN_MASK		BIT(23)
+#define EMAC_RXMBP_CEFEN_MASK		BIT(22)
+#define EMAC_RXMBP_CAFEN_MASK		BIT(21)
+#define EMAC_RXMBP_PROMCH_SHIFT		(16)
+#define EMAC_RXMBP_PROMCH_MASK		(0x7 << 16)
+#define EMAC_RXMBP_BROADEN_MASK		BIT(13)
+#define EMAC_RXMBP_BROADCH_SHIFT	(8)
+#define EMAC_RXMBP_BROADCH_MASK		(0x7 << 8)
+#define EMAC_RXMBP_MULTIEN_MASK		BIT(5)
+#define EMAC_RXMBP_MULTICH_SHIFT	(0)
+#define EMAC_RXMBP_MULTICH_MASK		(0x7)
+#define EMAC_RXMBP_CHMASK		(0x7)
+
+/* EMAC register definitions/bit maps used */
+# define EMAC_MBP_RXPROMISC		(0x00200000)
+# define EMAC_MBP_PROMISCCH(ch)		(((ch) & 0x7) << 16)
+# define EMAC_MBP_RXBCAST		(0x00002000)
+# define EMAC_MBP_BCASTCHAN(ch)		(((ch) & 0x7) << 8)
+# define EMAC_MBP_RXMCAST		(0x00000020)
+# define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
+
+/* EMAC mac_control register */
+#define EMAC_MACCONTROL_TXPTYPE		(0x200)
+#define EMAC_MACCONTROL_TXPACEEN	(0x40)
+#define EMAC_MACCONTROL_MIIEN		(0x20)
+#define EMAC_MACCONTROL_GIGABITEN	(0x80)
+#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	(0x1)
+#define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
+
+/* GIGABIT MODE related bits */
+#define EMAC_DM646X_MACCONTORL_GMIIEN	BIT(5)
+#define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
+#define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
+
+/* EMAC mac_status register */
+#define EMAC_MACSTATUS_TXERRCODE_MASK	(0xF00000)
+#define EMAC_MACSTATUS_TXERRCODE_SHIFT	(20)
+#define EMAC_MACSTATUS_TXERRCH_MASK	(0x7)
+#define EMAC_MACSTATUS_TXERRCH_SHIFT	(16)
+#define EMAC_MACSTATUS_RXERRCODE_MASK	(0xF000)
+#define EMAC_MACSTATUS_RXERRCODE_SHIFT	(12)
+#define EMAC_MACSTATUS_RXERRCH_MASK	(0x7)
+#define EMAC_MACSTATUS_RXERRCH_SHIFT	(8)
+
+/* EMAC RX register masks */
+#define EMAC_RX_MAX_LEN_MASK		(0xFFFF)
+#define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
+
+/* MAC_IN_VECTOR (0x180) register bit fields */
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	      (0x20000)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	      (0x10000)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	      (0x0100)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	      (0x01)
+
+/** NOTE:: For DM646x the IN_VECTOR has changed */
+#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC	BIT(16 + EMAC_DEF_TX_CH)
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT		BIT(31)
+#define EMAC_CPPI_EOP_BIT		BIT(30)
+#define EMAC_CPPI_OWNERSHIP_BIT		BIT(29)
+#define EMAC_CPPI_EOQ_BIT		BIT(28)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27)
+#define EMAC_CPPI_PASS_CRC_BIT		BIT(26)
+#define EMAC_RX_BD_BUF_SIZE		(0xFFFF)
+#define EMAC_BD_LENGTH_FOR_CACHE	(16) /* only CPPI bytes */
+#define EMAC_RX_BD_PKT_LENGTH_MASK	(0xFFFF)
+
+/* Max hardware defines */
+#define EMAC_MAX_TXRX_CHANNELS		 (8)  /* Max hardware channels */
+#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
+
+/* EMAC Peripheral Device Register Memory Layout structure */
+#define EMAC_TXIDVER		0x0
+#define EMAC_TXCONTROL		0x4
+#define EMAC_TXTEARDOWN		0x8
+#define EMAC_RXIDVER		0x10
+#define EMAC_RXCONTROL		0x14
+#define EMAC_RXTEARDOWN		0x18
+#define EMAC_TXINTSTATRAW	0x80
+#define EMAC_TXINTSTATMASKED	0x84
+#define EMAC_TXINTMASKSET	0x88
+#define EMAC_TXINTMASKCLEAR	0x8C
+#define EMAC_MACINVECTOR	0x90
+
+#define EMAC_DM646X_MACEOIVECTOR	0x94
+
+#define EMAC_RXINTSTATRAW	0xA0
+#define EMAC_RXINTSTATMASKED	0xA4
+#define EMAC_RXINTMASKSET	0xA8
+#define EMAC_RXINTMASKCLEAR	0xAC
+#define EMAC_MACINTSTATRAW	0xB0
+#define EMAC_MACINTSTATMASKED	0xB4
+#define EMAC_MACINTMASKSET	0xB8
+#define EMAC_MACINTMASKCLEAR	0xBC
+
+#define EMAC_RXMBPENABLE	0x100
+#define EMAC_RXUNICASTSET	0x104
+#define EMAC_RXUNICASTCLEAR	0x108
+#define EMAC_RXMAXLEN		0x10C
+#define EMAC_RXBUFFEROFFSET	0x110
+#define EMAC_RXFILTERLOWTHRESH	0x114
+
+#define EMAC_MACCONTROL		0x160
+#define EMAC_MACSTATUS		0x164
+#define EMAC_EMCONTROL		0x168
+#define EMAC_FIFOCONTROL	0x16C
+#define EMAC_MACCONFIG		0x170
+#define EMAC_SOFTRESET		0x174
+#define EMAC_MACSRCADDRLO	0x1D0
+#define EMAC_MACSRCADDRHI	0x1D4
+#define EMAC_MACHASH1		0x1D8
+#define EMAC_MACHASH2		0x1DC
+#define EMAC_MACADDRLO		0x500
+#define EMAC_MACADDRHI		0x504
+#define EMAC_MACINDEX		0x508
+
+/* EMAC HDP and Completion registors */
+#define EMAC_TXHDP(ch)		(0x600 + (ch * 4))
+#define EMAC_RXHDP(ch)		(0x620 + (ch * 4))
+#define EMAC_TXCP(ch)		(0x640 + (ch * 4))
+#define EMAC_RXCP(ch)		(0x660 + (ch * 4))
+
+/* EMAC statistics registers */
+#define EMAC_RXGOODFRAMES	0x200
+#define EMAC_RXBCASTFRAMES	0x204
+#define EMAC_RXMCASTFRAMES	0x208
+#define EMAC_RXPAUSEFRAMES	0x20C
+#define EMAC_RXCRCERRORS	0x210
+#define EMAC_RXALIGNCODEERRORS	0x214
+#define EMAC_RXOVERSIZED	0x218
+#define EMAC_RXJABBER		0x21C
+#define EMAC_RXUNDERSIZED	0x220
+#define EMAC_RXFRAGMENTS	0x224
+#define EMAC_RXFILTERED		0x228
+#define EMAC_RXQOSFILTERED	0x22C
+#define EMAC_RXOCTETS		0x230
+#define EMAC_TXGOODFRAMES	0x234
+#define EMAC_TXBCASTFRAMES	0x238
+#define EMAC_TXMCASTFRAMES	0x23C
+#define EMAC_TXPAUSEFRAMES	0x240
+#define EMAC_TXDEFERRED		0x244
+#define EMAC_TXCOLLISION	0x248
+#define EMAC_TXSINGLECOLL	0x24C
+#define EMAC_TXMULTICOLL	0x250
+#define EMAC_TXEXCESSIVECOLL	0x254
+#define EMAC_TXLATECOLL		0x258
+#define EMAC_TXUNDERRUN		0x25C
+#define EMAC_TXCARRIERSENSE	0x260
+#define EMAC_TXOCTETS		0x264
+#define EMAC_NETOCTETS		0x280
+#define EMAC_RXSOFOVERRUNS	0x284
+#define EMAC_RXMOFOVERRUNS	0x288
+#define EMAC_RXDMAOVERRUNS	0x28C
+
+/* EMAC DM644x control registers */
+#define EMAC_CTRL_EWCTL		(0x4)
+#define EMAC_CTRL_EWINTTCNT	(0x8)
+
+/* EMAC MDIO related */
+/* Mask & Control defines */
+#define MDIO_CONTROL_CLKDIV	(0xFF)
+#define MDIO_CONTROL_ENABLE	BIT(30)
+#define MDIO_USERACCESS_GO	BIT(31)
+#define MDIO_USERACCESS_WRITE	BIT(30)
+#define MDIO_USERACCESS_READ	(0)
+#define MDIO_USERACCESS_REGADR	(0x1F << 21)
+#define MDIO_USERACCESS_PHYADR	(0x1F << 16)
+#define MDIO_USERACCESS_DATA	(0xFFFF)
+#define MDIO_USERPHYSEL_LINKSEL	BIT(7)
+#define MDIO_VER_MODID		(0xFFFF << 16)
+#define MDIO_VER_REVMAJ		(0xFF   << 8)
+#define MDIO_VER_REVMIN		(0xFF)
+
+#define MDIO_USERACCESS(inst)	(0x80 + (inst * 8))
+#define MDIO_USERPHYSEL(inst)	(0x84 + (inst * 8))
+#define MDIO_CONTROL		(0x04)
+
+/* EMAC DM646X control module registers */
+#define EMAC_DM646X_CMRXINTEN	(0x14)
+#define EMAC_DM646X_CMTXINTEN	(0x18)
+
+/* EMAC EOI codes for C0 */
+#define EMAC_DM646X_MAC_EOI_C0_RXEN	(0x01)
+#define EMAC_DM646X_MAC_EOI_C0_TXEN	(0x02)
+
+/** net_buf_obj: EMAC network bufferdata structure
+ *
+ * EMAC network buffer data structure
+ */
+struct emac_netbufobj {
+	void *buf_token;
+	char *data_ptr;
+	int length;
+};
+
+/** net_pkt_obj: EMAC network packet data structure
+ *
+ * EMAC network packet data structure - supports buffer list (for future)
+ */
+struct emac_netpktobj {
+	void *pkt_token; /* data token may hold tx/rx chan id */
+	struct emac_netbufobj *buf_list; /* array of network buffer objects */
+	int num_bufs;
+	int pkt_length;
+};
+
+/** emac_tx_bd: EMAC TX Buffer descriptor data structure
+ *
+ * EMAC TX Buffer descriptor data structure
+ */
+struct emac_tx_bd {
+	int h_next;
+	int buff_ptr;
+	int off_b_len;
+	int mode; /* SOP, EOP, ownership, EOQ, teardown,Qstarv, length */
+	struct emac_tx_bd __iomem *next;
+	void *buf_token;
+};
+
+/** emac_txch: EMAC TX Channel data structure
+ *
+ * EMAC TX Channel data structure
+ */
+struct emac_txch {
+	/* Config related */
+	u32 num_bd;
+	u32 service_max;
+
+	/* CPPI specific */
+	u32 alloc_size;
+	void __iomem *bd_mem;
+	struct emac_tx_bd __iomem *bd_pool_head;
+	struct emac_tx_bd __iomem *active_queue_head;
+	struct emac_tx_bd __iomem *active_queue_tail;
+	struct emac_tx_bd __iomem *last_hw_bdprocessed;
+	u32 queue_active;
+	u32 teardown_pending;
+	u32 *tx_complete;
+
+	/** statistics */
+	u32 proc_count;     /* TX: # of times emac_tx_bdproc is called */
+	u32 mis_queued_packets;
+	u32 queue_reinit;
+	u32 end_of_queue_add;
+	u32 out_of_tx_bd;
+	u32 no_active_pkts; /* IRQ when there were no packets to process */
+	u32 active_queue_count;
+};
+
+/** emac_rx_bd: EMAC RX Buffer descriptor data structure
+ *
+ * EMAC RX Buffer descriptor data structure
+ */
+struct emac_rx_bd {
+	int h_next;
+	int buff_ptr;
+	int off_b_len;
+	int mode;
+	struct emac_rx_bd __iomem *next;
+	void *data_ptr;
+	void *buf_token;
+};
+
+/** emac_rxch: EMAC RX Channel data structure
+ *
+ * EMAC RX Channel data structure
+ */
+struct emac_rxch {
+	/* configuration info */
+	u32 num_bd;
+	u32 service_max;
+	u32 buf_size;
+	char mac_addr[6];
+
+	/** CPPI specific */
+	u32 alloc_size;
+	void __iomem *bd_mem;
+	struct emac_rx_bd __iomem *bd_pool_head;
+	struct emac_rx_bd __iomem *active_queue_head;
+	struct emac_rx_bd __iomem *active_queue_tail;
+	u32 queue_active;
+	u32 teardown_pending;
+
+	/* packet and buffer objects */
+	struct emac_netpktobj pkt_queue;
+	struct emac_netbufobj buf_queue;
+
+	/** statistics */
+	u32 proc_count; /* number of times emac_rx_bdproc is called */
+	u32 processed_bd;
+	u32 recycled_bd;
+	u32 out_of_rx_bd;
+	u32 out_of_rx_buffers;
+	u32 queue_reinit;
+	u32 end_of_queue_add;
+	u32 end_of_queue;
+	u32 mis_queued_packets;
+};
+
+/* emac_priv: EMAC private data structure
+ *
+ * EMAC adapter private data structure
+ */
+struct emac_priv {
+	u32 msg_enable;
+	struct net_device *ndev;
+	struct platform_device *pdev;
+	struct napi_struct napi;
+	char mac_addr[6];
+	spinlock_t tx_lock;
+	spinlock_t rx_lock;
+	void __iomem *remap_addr;
+	u32 emac_base_phys;
+	void __iomem *emac_base;
+	void __iomem *ctrl_base;
+	void __iomem *emac_ctrl_ram;
+	u32 ctrl_ram_size;
+	struct emac_txch *txch[EMAC_DEF_MAX_TX_CH];
+	struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH];
+	u32 link; /* 1=link on, 0=link off */
+	u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */
+	u32 duplex; /* Link duplex: 0=Half, 1=Full */
+	u32 rx_buf_size;
+	u32 isr_count;
+	u8 rmii_en;
+	u8 version;
+	struct net_device_stats net_dev_stats;
+	u32 mac_hash1;
+	u32 mac_hash2;
+	u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
+	u32 rx_addr_type;
+	/* periodic timer required for MDIO polling */
+	struct timer_list periodic_timer;
+	u32 periodic_ticks;
+	u32 timer_active;
+	u32 phy_mask;
+	/* mii_bus,phy members */
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+	spinlock_t lock;
+};
+
+/* clock frequency for EMAC */
+static struct clk *emac_clk;
+static unsigned long emac_bus_frequency;
+static unsigned long mdio_max_freq;
+
+/* EMAC internal utility function */
+static inline u32 emac_virt_to_phys(void __iomem *addr)
+{
+	return (u32 __force) io_v2p(addr);
+}
+
+/* Cache macros - Packet buffers would be from skb pool which is cached */
+#define EMAC_VIRT_NOCACHE(addr) (addr)
+#define EMAC_CACHE_INVALIDATE(addr, size) \
+	dma_cache_maint((void *)addr, size, DMA_FROM_DEVICE)
+#define EMAC_CACHE_WRITEBACK(addr, size) \
+	dma_cache_maint((void *)addr, size, DMA_TO_DEVICE)
+#define EMAC_CACHE_WRITEBACK_INVALIDATE(addr, size) \
+	dma_cache_maint((void *)addr, size, DMA_BIDIRECTIONAL)
+
+/* DM644x does not have BD's in cached memory - so no cache functions */
+#define BD_CACHE_INVALIDATE(addr, size)
+#define BD_CACHE_WRITEBACK(addr, size)
+#define BD_CACHE_WRITEBACK_INVALIDATE(addr, size)
+
+/* EMAC TX Host Error description strings */
+static char *emac_txhost_errcodes[16] = {
+	"No error", "SOP error", "Ownership bit not set in SOP buffer",
+	"Zero Next Buffer Descriptor Pointer Without EOP",
+	"Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error",
+	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* EMAC RX Host Error description strings */
+static char *emac_rxhost_errcodes[16] = {
+	"No error", "Reserved", "Ownership bit not set in input buffer",
+	"Reserved", "Zero Buffer Pointer", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* Helper macros */
+#define emac_read(reg)		  ioread32(priv->emac_base + (reg))
+#define emac_write(reg, val)      iowrite32(val, priv->emac_base + (reg))
+
+#define emac_ctrl_read(reg)	  ioread32((priv->ctrl_base + (reg)))
+#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
+
+#define emac_mdio_read(reg)	  ioread32(bus->priv + (reg))
+#define emac_mdio_write(reg, val) iowrite32(val, (bus->priv + (reg)))
+
+/**
+ * emac_dump_regs: Dump important EMAC registers to debug terminal
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Executes ethtool set cmd & sets phy mode
+ *
+ */
+static void emac_dump_regs(struct emac_priv *priv)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+
+	/* Print important registers in EMAC */
+	dev_info(emac_dev, "EMAC Basic registers\n");
+	dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n",
+		emac_ctrl_read(EMAC_CTRL_EWCTL),
+		emac_ctrl_read(EMAC_CTRL_EWINTTCNT));
+	dev_info(emac_dev, "EMAC: TXID: %08X %s, RXID: %08X %s\n",
+		emac_read(EMAC_TXIDVER),
+		((emac_read(EMAC_TXCONTROL)) ? "enabled" : "disabled"),
+		emac_read(EMAC_RXIDVER),
+		((emac_read(EMAC_RXCONTROL)) ? "enabled" : "disabled"));
+	dev_info(emac_dev, "EMAC: TXIntRaw:%08X, TxIntMasked: %08X, "\
+		"TxIntMasSet: %08X\n", emac_read(EMAC_TXINTSTATRAW),
+		emac_read(EMAC_TXINTSTATMASKED), emac_read(EMAC_TXINTMASKSET));
+	dev_info(emac_dev, "EMAC: RXIntRaw:%08X, RxIntMasked: %08X, "\
+		"RxIntMasSet: %08X\n", emac_read(EMAC_RXINTSTATRAW),
+		emac_read(EMAC_RXINTSTATMASKED), emac_read(EMAC_RXINTMASKSET));
+	dev_info(emac_dev, "EMAC: MacIntRaw:%08X, MacIntMasked: %08X, "\
+		"MacInVector=%08X\n", emac_read(EMAC_MACINTSTATRAW),
+		emac_read(EMAC_MACINTSTATMASKED), emac_read(EMAC_MACINVECTOR));
+	dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n",
+		emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL));
+	dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\
+		"RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE),
+		emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN));
+	dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\
+		"MacConfig=%08X\n", emac_read(EMAC_MACCONTROL),
+		emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG));
+	dev_info(emac_dev, "EMAC: TXHDP[0]:%08X, RXHDP[0]: %08X\n",
+		emac_read(EMAC_TXHDP(0)), emac_read(EMAC_RXHDP(0)));
+	dev_info(emac_dev, "EMAC Statistics\n");
+	dev_info(emac_dev, "EMAC: rx_good_frames:%d\n",
+		emac_read(EMAC_RXGOODFRAMES));
+	dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n",
+		emac_read(EMAC_RXBCASTFRAMES));
+	dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n",
+		emac_read(EMAC_RXMCASTFRAMES));
+	dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n",
+		emac_read(EMAC_RXPAUSEFRAMES));
+	dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n",
+		emac_read(EMAC_RXCRCERRORS));
+	dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n",
+		emac_read(EMAC_RXALIGNCODEERRORS));
+	dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n",
+		emac_read(EMAC_RXOVERSIZED));
+	dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n",
+		emac_read(EMAC_RXJABBER));
+	dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n",
+		emac_read(EMAC_RXUNDERSIZED));
+	dev_info(emac_dev, "EMAC: rx_fragments:%d\n",
+		emac_read(EMAC_RXFRAGMENTS));
+	dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n",
+		emac_read(EMAC_RXFILTERED));
+	dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n",
+		emac_read(EMAC_RXQOSFILTERED));
+	dev_info(emac_dev, "EMAC: rx_octets:%d\n",
+		emac_read(EMAC_RXOCTETS));
+	dev_info(emac_dev, "EMAC: tx_goodframes:%d\n",
+		emac_read(EMAC_TXGOODFRAMES));
+	dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n",
+		emac_read(EMAC_TXBCASTFRAMES));
+	dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n",
+		emac_read(EMAC_TXMCASTFRAMES));
+	dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n",
+		emac_read(EMAC_TXPAUSEFRAMES));
+	dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n",
+		emac_read(EMAC_TXDEFERRED));
+	dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n",
+		emac_read(EMAC_TXCOLLISION));
+	dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n",
+		emac_read(EMAC_TXSINGLECOLL));
+	dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n",
+		emac_read(EMAC_TXMULTICOLL));
+	dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n",
+		emac_read(EMAC_TXEXCESSIVECOLL));
+	dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n",
+		emac_read(EMAC_TXLATECOLL));
+	dev_info(emac_dev, "EMAC: tx_underrun:%d\n",
+		emac_read(EMAC_TXUNDERRUN));
+	dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n",
+		emac_read(EMAC_TXCARRIERSENSE));
+	dev_info(emac_dev, "EMAC: tx_octets:%d\n",
+		emac_read(EMAC_TXOCTETS));
+	dev_info(emac_dev, "EMAC: net_octets:%d\n",
+		emac_read(EMAC_NETOCTETS));
+	dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n",
+		emac_read(EMAC_RXSOFOVERRUNS));
+	dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n",
+		emac_read(EMAC_RXMOFOVERRUNS));
+	dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n",
+		emac_read(EMAC_RXDMAOVERRUNS));
+}
+
+/*************************************************************************
+ *  EMAC MDIO/Phy Functionality
+ *************************************************************************/
+/**
+ * emac_get_drvinfo: Get EMAC driver information
+ * @ndev: The DaVinci EMAC network adapter
+ * @info: ethtool info structure containing name and version
+ *
+ * Returns EMAC driver information (name and version)
+ *
+ */
+static void emac_get_drvinfo(struct net_device *ndev,
+			     struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, emac_version_string);
+	strcpy(info->version, EMAC_MODULE_VERSION);
+}
+
+/**
+ * emac_get_settings: Get EMAC settings
+ * @ndev: The DaVinci EMAC network adapter
+ * @ecmd: ethtool command
+ *
+ * Executes ethool get command
+ *
+ */
+static int emac_get_settings(struct net_device *ndev,
+			     struct ethtool_cmd *ecmd)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	if (priv->phy_mask)
+		return phy_ethtool_gset(priv->phydev, ecmd);
+	else
+		return -EOPNOTSUPP;
+
+}
+
+/**
+ * emac_set_settings: Set EMAC settings
+ * @ndev: The DaVinci EMAC network adapter
+ * @ecmd: ethtool command
+ *
+ * Executes ethool set command
+ *
+ */
+static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	if (priv->phy_mask)
+		return phy_ethtool_sset(priv->phydev, ecmd);
+	else
+		return -EOPNOTSUPP;
+
+}
+
+/**
+ * ethtool_ops: DaVinci EMAC Ethtool structure
+ *
+ * Ethtool support for EMAC adapter
+ *
+ */
+static const struct ethtool_ops ethtool_ops = {
+	.get_drvinfo = emac_get_drvinfo,
+	.get_settings = emac_get_settings,
+	.set_settings = emac_set_settings,
+	.get_link = ethtool_op_get_link,
+};
+
+/**
+ * emac_update_phystatus: Update Phy status
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Updates phy status and takes action for network queue if required
+ * based upon link status
+ *
+ */
+static void emac_update_phystatus(struct emac_priv *priv)
+{
+	u32 mac_control;
+	u32 new_duplex;
+	u32 cur_duplex;
+	struct net_device *ndev = priv->ndev;
+
+	mac_control = emac_read(EMAC_MACCONTROL);
+	cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
+			DUPLEX_FULL : DUPLEX_HALF;
+	if (priv->phy_mask)
+		new_duplex = priv->phydev->duplex;
+	else
+		new_duplex = DUPLEX_FULL;
+
+	/* We get called only if link has changed (speed/duplex/status) */
+	if ((priv->link) && (new_duplex != cur_duplex)) {
+		priv->duplex = new_duplex;
+		if (DUPLEX_FULL == priv->duplex)
+			mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN);
+		else
+			mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN);
+	}
+
+	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
+		mac_control = emac_read(EMAC_MACCONTROL);
+		mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
+				EMAC_DM646X_MACCONTORL_GIG |
+				EMAC_DM646X_MACCONTORL_GIGFORCE);
+	} else {
+		/* Clear the GIG bit and GIGFORCE bit */
+		mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE |
+					EMAC_DM646X_MACCONTORL_GIG);
+
+		if (priv->rmii_en && (priv->speed == SPEED_100))
+			mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK;
+		else
+			mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK;
+	}
+
+	/* Update mac_control if changed */
+	emac_write(EMAC_MACCONTROL, mac_control);
+
+	if (priv->link) {
+		/* link ON */
+		if (!netif_carrier_ok(ndev))
+			netif_carrier_on(ndev);
+	/* reactivate the transmit queue if it is stopped */
+		if (netif_running(ndev) && netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+	} else {
+		/* link OFF */
+		if (netif_carrier_ok(ndev))
+			netif_carrier_off(ndev);
+		if (!netif_queue_stopped(ndev))
+			netif_stop_queue(ndev);
+	}
+}
+
+/**
+ * hash_get: Calculate hash value from mac address
+ * @addr: mac address to delete from hash table
+ *
+ * Calculates hash value from mac address
+ *
+ */
+static u32 hash_get(u8 *addr)
+{
+	u32 hash;
+	u8 tmpval;
+	int cnt;
+	hash = 0;
+
+	for (cnt = 0; cnt < 2; cnt++) {
+		tmpval = *addr++;
+		hash ^= (tmpval >> 2) ^ (tmpval << 4);
+		tmpval = *addr++;
+		hash ^= (tmpval >> 4) ^ (tmpval << 2);
+		tmpval = *addr++;
+		hash ^= (tmpval >> 6) ^ (tmpval);
+	}
+
+	return hash & 0x3F;
+}
+
+/**
+ * hash_add: Hash function to add mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * mac_addr: mac address to delete from hash table
+ *
+ * Adds mac address to the internal hash table
+ *
+ */
+static int hash_add(struct emac_priv *priv, u8 *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 rc = 0;
+	u32 hash_bit;
+	u32 hash_value = hash_get(mac_addr);
+
+	if (hash_value >= EMAC_NUM_MULTICAST_BITS) {
+		if (netif_msg_drv(priv)) {
+			dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\
+				"Hash %08x, should not be greater than %08x",
+				hash_value, (EMAC_NUM_MULTICAST_BITS - 1));
+		}
+		return -1;
+	}
+
+	/* set the hash bit only if not previously set */
+	if (priv->multicast_hash_cnt[hash_value] == 0) {
+		rc = 1; /* hash value changed */
+		if (hash_value < 32) {
+			hash_bit = BIT(hash_value);
+			priv->mac_hash1 |= hash_bit;
+		} else {
+			hash_bit = BIT((hash_value - 32));
+			priv->mac_hash2 |= hash_bit;
+		}
+	}
+
+	/* incr counter for num of mcast addr's mapped to "this" hash bit */
+	++priv->multicast_hash_cnt[hash_value];
+
+	return rc;
+}
+
+/**
+ * hash_del: Hash function to delete mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * mac_addr: mac address to delete from hash table
+ *
+ * Removes mac address from the internal hash table
+ *
+ */
+static int hash_del(struct emac_priv *priv, u8 *mac_addr)
+{
+	u32 hash_value;
+	u32 hash_bit;
+
+	hash_value = hash_get(mac_addr);
+	if (priv->multicast_hash_cnt[hash_value] > 0) {
+		/* dec cntr for num of mcast addr's mapped to this hash bit */
+		--priv->multicast_hash_cnt[hash_value];
+	}
+
+	/* if counter still > 0, at least one multicast address refers
+	 * to this hash bit. so return 0 */
+	if (priv->multicast_hash_cnt[hash_value] > 0)
+		return 0;
+
+	if (hash_value < 32) {
+		hash_bit = BIT(hash_value);
+		priv->mac_hash1 &= ~hash_bit;
+	} else {
+		hash_bit = BIT((hash_value - 32));
+		priv->mac_hash2 &= ~hash_bit;
+	}
+
+	/* return 1 to indicate change in mac_hash registers reqd */
+	return 1;
+}
+
+/* EMAC multicast operation */
+#define EMAC_MULTICAST_ADD	0
+#define EMAC_MULTICAST_DEL	1
+#define EMAC_ALL_MULTI_SET	2
+#define EMAC_ALL_MULTI_CLR	3
+
+/**
+ * emac_add_mcast: Set multicast address in the EMAC adapter (Internal)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @action: multicast operation to perform
+ * mac_addr: mac address to set
+ *
+ * Set multicast addresses in EMAC adapter - internal function
+ *
+ */
+static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	int update = -1;
+
+	switch (action) {
+	case EMAC_MULTICAST_ADD:
+		update = hash_add(priv, mac_addr);
+		break;
+	case EMAC_MULTICAST_DEL:
+		update = hash_del(priv, mac_addr);
+		break;
+	case EMAC_ALL_MULTI_SET:
+		update = 1;
+		priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE;
+		priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE;
+		break;
+	case EMAC_ALL_MULTI_CLR:
+		update = 1;
+		priv->mac_hash1 = 0;
+		priv->mac_hash2 = 0;
+		memset(&(priv->multicast_hash_cnt[0]), 0,
+		sizeof(priv->multicast_hash_cnt[0]) *
+		       EMAC_NUM_MULTICAST_BITS);
+		break;
+	default:
+		if (netif_msg_drv(priv))
+			dev_err(emac_dev, "DaVinci EMAC: add_mcast"\
+				": bad operation %d", action);
+		break;
+	}
+
+	/* write to the hardware only if the register status chances */
+	if (update > 0) {
+		emac_write(EMAC_MACHASH1, priv->mac_hash1);
+		emac_write(EMAC_MACHASH2, priv->mac_hash2);
+	}
+}
+
+/**
+ * emac_dev_mcast_set: Set multicast address in the EMAC adapter
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Set multicast addresses in EMAC adapter
+ *
+ */
+static void emac_dev_mcast_set(struct net_device *ndev)
+{
+	u32 mbp_enable;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	mbp_enable = emac_read(EMAC_RXMBPENABLE);
+	if (ndev->flags & IFF_PROMISC) {
+		mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH));
+		mbp_enable |= (EMAC_MBP_RXPROMISC);
+	} else {
+		mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
+		if ((ndev->flags & IFF_ALLMULTI) ||
+		    (ndev->mc_count > EMAC_DEF_MAX_MULTICAST_ADDRESSES)) {
+			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
+		}
+		if (ndev->mc_count > 0) {
+			struct dev_mc_list *mc_ptr;
+			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+			/* program multicast address list into EMAC hardware */
+			for (mc_ptr = ndev->mc_list; mc_ptr;
+			     mc_ptr = mc_ptr->next) {
+				emac_add_mcast(priv, EMAC_MULTICAST_ADD,
+					       (u8 *)mc_ptr->dmi_addr);
+			}
+		} else {
+			mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+		}
+	}
+	/* Set mbp config register */
+	emac_write(EMAC_RXMBPENABLE, mbp_enable);
+}
+
+/*************************************************************************
+ *  EMAC Hardware manipulation
+ *************************************************************************/
+
+/**
+ * emac_int_disable: Disable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Disable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_disable(struct emac_priv *priv)
+{
+	if (priv->version == EMAC_VERSION_2) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+
+		/* Program C0_Int_En to zero to turn off
+		* interrupts to the CPU */
+		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
+		/* NOTE: Rx Threshold and Misc interrupts are not disabled */
+
+		local_irq_restore(flags);
+
+	} else {
+		/* Set DM644x control registers for interrupt control */
+		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0);
+	}
+}
+
+/**
+ * emac_int_enable: Enable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_enable(struct emac_priv *priv)
+{
+	if (priv->version == EMAC_VERSION_2) {
+		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
+
+		/* In addition to turning on interrupt Enable, we need
+		 * ack by writing appropriate values to the EOI
+		 * register */
+
+		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
+
+		/* ack rxen only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_RXEN);
+
+		/* ack txen- only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_TXEN);
+
+	} else {
+		/* Set DM644x control registers for interrupt control */
+		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
+	}
+}
+
+/**
+ * emac_irq: EMAC interrupt handler
+ * @irq: interrupt number
+ * @dev_id: EMAC network adapter data structure ptr
+ *
+ * EMAC Interrupt handler - we only schedule NAPI and not process any packets
+ * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function
+ *
+ * Returns interrupt handled condition
+ */
+static irqreturn_t emac_irq(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	++priv->isr_count;
+	if (likely(netif_running(priv->ndev))) {
+		emac_int_disable(priv);
+		napi_schedule(&priv->napi);
+	} else {
+		/* we are closing down, so dont process anything */
+	}
+	return IRQ_HANDLED;
+}
+
+/** EMAC on-chip buffer descriptor memory
+ *
+ * WARNING: Please note that the on chip memory is used for both TX and RX
+ * buffer descriptor queues and is equally divided between TX and RX desc's
+ * If the number of TX or RX descriptors change this memory pointers need
+ * to be adjusted. If external memory is allocated then these pointers can
+ * pointer to the memory
+ *
+ */
+#define EMAC_TX_BD_MEM(priv)	((priv)->emac_ctrl_ram)
+#define EMAC_RX_BD_MEM(priv)	((priv)->emac_ctrl_ram + \
+				(((priv)->ctrl_ram_size) >> 1))
+
+/**
+ * emac_init_txch: TX channel initialization
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device init to setup a TX channel (allocate buffer desc
+ * create free pool and keep ready for transmission
+ *
+ * Returns success(0) or mem alloc failures error code
+ */
+static int emac_init_txch(struct emac_priv *priv, u32 ch)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 cnt, bd_size;
+	void __iomem *mem;
+	struct emac_tx_bd __iomem *curr_bd;
+	struct emac_txch *txch = NULL;
+
+	txch = kzalloc(sizeof(struct emac_txch), GFP_KERNEL);
+	if (NULL == txch) {
+		dev_err(emac_dev, "DaVinci EMAC: TX Ch mem alloc failed");
+		return -ENOMEM;
+	}
+	priv->txch[ch] = txch;
+	txch->service_max = EMAC_DEF_TX_MAX_SERVICE;
+	txch->active_queue_head = NULL;
+	txch->active_queue_tail = NULL;
+	txch->queue_active = 0;
+	txch->teardown_pending = 0;
+
+	/* allocate memory for TX CPPI channel on a 4 byte boundry */
+	txch->tx_complete = kzalloc(txch->service_max * sizeof(u32),
+				    GFP_KERNEL);
+	if (NULL == txch->tx_complete) {
+		dev_err(emac_dev, "DaVinci EMAC: Tx service mem alloc failed");
+		kfree(txch);
+		return -ENOMEM;
+	}
+
+	/* allocate buffer descriptor pool align every BD on four word
+	 * boundry for future requirements */
+	bd_size = (sizeof(struct emac_tx_bd) + 0xF) & ~0xF;
+	txch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size;
+	txch->alloc_size = (((bd_size * txch->num_bd) + 0xF) & ~0xF);
+
+	/* alloc TX BD memory */
+	txch->bd_mem = EMAC_TX_BD_MEM(priv);
+	__memzero((void __force *)txch->bd_mem, txch->alloc_size);
+
+	/* initialize the BD linked list */
+	mem = (void __force __iomem *)
+			(((u32 __force) txch->bd_mem + 0xF) & ~0xF);
+	txch->bd_pool_head = NULL;
+	for (cnt = 0; cnt < txch->num_bd; cnt++) {
+		curr_bd = mem + (cnt * bd_size);
+		curr_bd->next = txch->bd_pool_head;
+		txch->bd_pool_head = curr_bd;
+	}
+
+	/* reset statistics counters */
+	txch->out_of_tx_bd = 0;
+	txch->no_active_pkts = 0;
+	txch->active_queue_count = 0;
+
+	return 0;
+}
+
+/**
+ * emac_cleanup_txch: Book-keep function to clean TX channel resources
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number
+ *
+ * Called to clean up TX channel resources
+ *
+ */
+static void emac_cleanup_txch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_txch *txch = priv->txch[ch];
+
+	if (txch) {
+		if (txch->bd_mem)
+			txch->bd_mem = NULL;
+		kfree(txch->tx_complete);
+		kfree(txch);
+		priv->txch[ch] = NULL;
+	}
+}
+
+/**
+ * emac_net_tx_complete: TX packet completion function
+ * @priv: The DaVinci EMAC private adapter structure
+ * @net_data_tokens: packet token - skb pointer
+ * @num_tokens: number of skb's to free
+ * @ch: TX channel number
+ *
+ * Frees the skb once packet is transmitted
+ *
+ */
+static int emac_net_tx_complete(struct emac_priv *priv,
+				void **net_data_tokens,
+				int num_tokens, u32 ch)
+{
+	u32 cnt;
+
+	if (unlikely(num_tokens && netif_queue_stopped(priv->ndev)))
+		netif_start_queue(priv->ndev);
+	for (cnt = 0; cnt < num_tokens; cnt++) {
+		struct sk_buff *skb = (struct sk_buff *)net_data_tokens[cnt];
+		if (skb == NULL)
+			continue;
+		priv->net_dev_stats.tx_packets++;
+		priv->net_dev_stats.tx_bytes += skb->len;
+		dev_kfree_skb_any(skb);
+	}
+	return 0;
+}
+
+/**
+ * emac_txch_teardown: TX channel teardown
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number
+ *
+ * Called to teardown TX channel
+ *
+ */
+static void emac_txch_teardown(struct emac_priv *priv, u32 ch)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */
+	struct emac_txch *txch = priv->txch[ch];
+	struct emac_tx_bd __iomem *curr_bd;
+
+	while ((emac_read(EMAC_TXCP(ch)) & EMAC_TEARDOWN_VALUE) !=
+	       EMAC_TEARDOWN_VALUE) {
+		/* wait till tx teardown complete */
+		cpu_relax(); /* TODO: check if this helps ... */
+		--teardown_cnt;
+		if (0 == teardown_cnt) {
+			dev_err(emac_dev, "EMAC: TX teardown aborted\n");
+			break;
+		}
+	}
+	emac_write(EMAC_TXCP(ch), EMAC_TEARDOWN_VALUE);
+
+	/* process sent packets and return skb's to upper layer */
+	if (1 == txch->queue_active) {
+		curr_bd = txch->active_queue_head;
+		while (curr_bd != NULL) {
+			emac_net_tx_complete(priv, (void __force *)
+					&curr_bd->buf_token, 1, ch);
+			if (curr_bd != txch->active_queue_tail)
+				curr_bd = curr_bd->next;
+			else
+				break;
+		}
+		txch->bd_pool_head = txch->active_queue_head;
+		txch->active_queue_head =
+		txch->active_queue_tail = NULL;
+	}
+}
+
+/**
+ * emac_stop_txch: Stop TX channel operation
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number
+ *
+ * Called to stop TX channel operation
+ *
+ */
+static void emac_stop_txch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_txch *txch = priv->txch[ch];
+
+	if (txch) {
+		txch->teardown_pending = 1;
+		emac_write(EMAC_TXTEARDOWN, 0);
+		emac_txch_teardown(priv, ch);
+		txch->teardown_pending = 0;
+		emac_write(EMAC_TXINTMASKCLEAR, BIT(ch));
+	}
+}
+
+/**
+ * emac_tx_bdproc: TX buffer descriptor (packet) processing
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number to process buffer descriptors for
+ * @budget: number of packets allowed to process
+ * @pending: indication to caller that packets are pending to process
+ *
+ * Processes TX buffer descriptors after packets are transmitted - checks
+ * ownership bit on the TX * descriptor and requeues it to free pool & frees
+ * the SKB buffer. Only "budget" number of packets are processed and
+ * indication of pending packets provided to the caller
+ *
+ * Returns number of packets processed
+ */
+static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	unsigned long flags;
+	u32 frame_status;
+	u32 pkts_processed = 0;
+	u32 tx_complete_cnt = 0;
+	struct emac_tx_bd __iomem *curr_bd;
+	struct emac_txch *txch = priv->txch[ch];
+	u32 *tx_complete_ptr = txch->tx_complete;
+
+	if (unlikely(1 == txch->teardown_pending)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit()) {
+			dev_err(emac_dev, "DaVinci EMAC:emac_tx_bdproc: "\
+				"teardown pending\n");
+		}
+		return 0;  /* dont handle any pkt completions */
+	}
+
+	++txch->proc_count;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	curr_bd = txch->active_queue_head;
+	if (NULL == curr_bd) {
+		emac_write(EMAC_TXCP(ch),
+			   emac_virt_to_phys(txch->last_hw_bdprocessed));
+		txch->no_active_pkts++;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		return 0;
+	}
+	BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+	frame_status = curr_bd->mode;
+	while ((curr_bd) &&
+	      ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
+	      (pkts_processed < budget)) {
+		emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd));
+		txch->active_queue_head = curr_bd->next;
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			if (curr_bd->next) {	/* misqueued packet */
+				emac_write(EMAC_TXHDP(ch), curr_bd->h_next);
+				++txch->mis_queued_packets;
+			} else {
+				txch->queue_active = 0; /* end of queue */
+			}
+		}
+		*tx_complete_ptr = (u32) curr_bd->buf_token;
+		++tx_complete_ptr;
+		++tx_complete_cnt;
+		curr_bd->next = txch->bd_pool_head;
+		txch->bd_pool_head = curr_bd;
+		--txch->active_queue_count;
+		pkts_processed++;
+		txch->last_hw_bdprocessed = curr_bd;
+		curr_bd = txch->active_queue_head;
+		if (curr_bd) {
+			BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+			frame_status = curr_bd->mode;
+		}
+	} /* end of pkt processing loop */
+
+	emac_net_tx_complete(priv,
+			     (void *)&txch->tx_complete[0],
+			     tx_complete_cnt, ch);
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return pkts_processed;
+}
+
+#define EMAC_ERR_TX_OUT_OF_BD -1
+
+/**
+ * emac_send: EMAC Transmit function (internal)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @pkt: packet pointer (contains skb ptr)
+ * @ch: TX channel number
+ *
+ * Called by the transmit function to queue the packet in EMAC hardware queue
+ *
+ * Returns success(0) or error code (typically out of desc's)
+ */
+static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch)
+{
+	unsigned long flags;
+	struct emac_tx_bd __iomem *curr_bd;
+	struct emac_txch *txch;
+	struct emac_netbufobj *buf_list;
+
+	txch = priv->txch[ch];
+	buf_list = pkt->buf_list;   /* get handle to the buffer array */
+
+	/* check packet size and pad if short */
+	if (pkt->pkt_length < EMAC_DEF_MIN_ETHPKTSIZE) {
+		buf_list->length += (EMAC_DEF_MIN_ETHPKTSIZE - pkt->pkt_length);
+		pkt->pkt_length = EMAC_DEF_MIN_ETHPKTSIZE;
+	}
+
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	curr_bd = txch->bd_pool_head;
+	if (curr_bd == NULL) {
+		txch->out_of_tx_bd++;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		return EMAC_ERR_TX_OUT_OF_BD;
+	}
+
+	txch->bd_pool_head = curr_bd->next;
+	curr_bd->buf_token = buf_list->buf_token;
+	/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
+	curr_bd->buff_ptr = virt_to_phys(buf_list->data_ptr);
+	curr_bd->off_b_len = buf_list->length;
+	curr_bd->h_next = 0;
+	curr_bd->next = NULL;
+	curr_bd->mode = (EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT |
+			 EMAC_CPPI_EOP_BIT | pkt->pkt_length);
+
+	/* flush the packet from cache if write back cache is present */
+	BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+
+	/* send the packet */
+	if (txch->active_queue_head == NULL) {
+		txch->active_queue_head = curr_bd;
+		txch->active_queue_tail = curr_bd;
+		if (1 != txch->queue_active) {
+			emac_write(EMAC_TXHDP(ch),
+					emac_virt_to_phys(curr_bd));
+			txch->queue_active = 1;
+		}
+		++txch->queue_reinit;
+	} else {
+		register struct emac_tx_bd __iomem *tail_bd;
+		register u32 frame_status;
+
+		tail_bd = txch->active_queue_tail;
+		tail_bd->next = curr_bd;
+		txch->active_queue_tail = curr_bd;
+		tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
+		tail_bd->h_next = (int)emac_virt_to_phys(curr_bd);
+		frame_status = tail_bd->mode;
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			emac_write(EMAC_TXHDP(ch), emac_virt_to_phys(curr_bd));
+			frame_status &= ~(EMAC_CPPI_EOQ_BIT);
+			tail_bd->mode = frame_status;
+			++txch->end_of_queue_add;
+		}
+	}
+	txch->active_queue_count++;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return 0;
+}
+
+/**
+ * emac_dev_xmit: EMAC Transmit function
+ * @skb: SKB pointer
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called by the system to transmit a packet  - we queue the packet in
+ * EMAC hardware transmit queue
+ *
+ * Returns success(NETDEV_TX_OK) or error code (typically out of desc's)
+ */
+static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct device *emac_dev = &ndev->dev;
+	int ret_code;
+	struct emac_netbufobj tx_buf; /* buffer obj-only single frame support */
+	struct emac_netpktobj tx_packet;  /* packet object */
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	/* If no link, return */
+	if (unlikely(!priv->link)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: No link to transmit");
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Build the buffer and packet objects - Since only single fragment is
+	 * supported, need not set length and token in both packet & object.
+	 * Doing so for completeness sake & to show that this needs to be done
+	 * in multifragment case
+	 */
+	tx_packet.buf_list = &tx_buf;
+	tx_packet.num_bufs = 1; /* only single fragment supported */
+	tx_packet.pkt_length = skb->len;
+	tx_packet.pkt_token = (void *)skb;
+	tx_buf.length = skb->len;
+	tx_buf.buf_token = (void *)skb;
+	tx_buf.data_ptr = skb->data;
+	EMAC_CACHE_WRITEBACK((unsigned long)skb->data, skb->len);
+	ndev->trans_start = jiffies;
+	ret_code = emac_send(priv, &tx_packet, EMAC_DEF_TX_CH);
+	if (unlikely(ret_code != 0)) {
+		if (ret_code == EMAC_ERR_TX_OUT_OF_BD) {
+			if (netif_msg_tx_err(priv) && net_ratelimit())
+				dev_err(emac_dev, "DaVinci EMAC: xmit() fatal"\
+					" err. Out of TX BD's");
+			netif_stop_queue(priv->ndev);
+		}
+		priv->net_dev_stats.tx_dropped++;
+		return NETDEV_TX_BUSY;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * emac_dev_tx_timeout: EMAC Transmit timeout function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system detects that a skb timeout period has expired
+ * potentially due to a fault in the adapter in not being able to send
+ * it out on the wire. We teardown the TX channel assuming a hardware
+ * error and re-initialize the TX channel for hardware operation
+ *
+ */
+static void emac_dev_tx_timeout(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &ndev->dev;
+
+	if (netif_msg_tx_err(priv))
+		dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX");
+
+	priv->net_dev_stats.tx_errors++;
+	emac_int_disable(priv);
+	emac_stop_txch(priv, EMAC_DEF_TX_CH);
+	emac_cleanup_txch(priv, EMAC_DEF_TX_CH);
+	emac_init_txch(priv, EMAC_DEF_TX_CH);
+	emac_write(EMAC_TXHDP(0), 0);
+	emac_write(EMAC_TXINTMASKSET, BIT(EMAC_DEF_TX_CH));
+	emac_int_enable(priv);
+}
+
+/**
+ * emac_net_alloc_rx_buf: Allocate a skb for RX
+ * @priv: The DaVinci EMAC private adapter structure
+ * @buf_size: size of SKB data buffer to allocate
+ * @data_token: data token returned (skb handle for storing in buffer desc)
+ * @ch: RX channel number
+ *
+ * Called during RX channel setup - allocates skb buffer of required size
+ * and provides the skb handle and allocated buffer data pointer to caller
+ *
+ * Returns skb data pointer or 0 on failure to alloc skb
+ */
+static void *emac_net_alloc_rx_buf(struct emac_priv *priv, int buf_size,
+		void **data_token, u32 ch)
+{
+	struct net_device *ndev = priv->ndev;
+	struct device *emac_dev = &ndev->dev;
+	struct sk_buff *p_skb;
+
+	p_skb = dev_alloc_skb(buf_size);
+	if (unlikely(NULL == p_skb)) {
+		if (netif_msg_rx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: failed to alloc skb");
+		return NULL;
+	}
+
+	/* set device pointer in skb and reserve space for extra bytes */
+	p_skb->dev = ndev;
+	skb_reserve(p_skb, NET_IP_ALIGN);
+	*data_token = (void *) p_skb;
+	EMAC_CACHE_WRITEBACK_INVALIDATE((unsigned long)p_skb->data, buf_size);
+	return p_skb->data;
+}
+
+/**
+ * emac_init_rxch: RX channel initialization
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @param: mac address for RX channel
+ *
+ * Called during device init to setup a RX channel (allocate buffers and
+ * buffer descriptors, create queue and keep ready for reception
+ *
+ * Returns success(0) or mem alloc failures error code
+ */
+static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 cnt, bd_size;
+	void __iomem *mem;
+	struct emac_rx_bd __iomem *curr_bd;
+	struct emac_rxch *rxch = NULL;
+
+	rxch = kzalloc(sizeof(struct emac_rxch), GFP_KERNEL);
+	if (NULL == rxch) {
+		dev_err(emac_dev, "DaVinci EMAC: RX Ch mem alloc failed");
+		return -ENOMEM;
+	}
+	priv->rxch[ch] = rxch;
+	rxch->buf_size = priv->rx_buf_size;
+	rxch->service_max = EMAC_DEF_RX_MAX_SERVICE;
+	rxch->queue_active = 0;
+	rxch->teardown_pending = 0;
+
+	/* save mac address */
+	for (cnt = 0; cnt < 6; cnt++)
+		rxch->mac_addr[cnt] = param[cnt];
+
+	/* allocate buffer descriptor pool align every BD on four word
+	 * boundry for future requirements */
+	bd_size = (sizeof(struct emac_rx_bd) + 0xF) & ~0xF;
+	rxch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size;
+	rxch->alloc_size = (((bd_size * rxch->num_bd) + 0xF) & ~0xF);
+	rxch->bd_mem = EMAC_RX_BD_MEM(priv);
+	__memzero((void __force *)rxch->bd_mem, rxch->alloc_size);
+	rxch->pkt_queue.buf_list = &rxch->buf_queue;
+
+	/* allocate RX buffer and initialize the BD linked list */
+	mem = (void __force __iomem *)
+			(((u32 __force) rxch->bd_mem + 0xF) & ~0xF);
+	rxch->active_queue_head = NULL;
+	rxch->active_queue_tail = mem;
+	for (cnt = 0; cnt < rxch->num_bd; cnt++) {
+		curr_bd = mem + (cnt * bd_size);
+		/* for future use the last parameter contains the BD ptr */
+		curr_bd->data_ptr = emac_net_alloc_rx_buf(priv,
+				    rxch->buf_size,
+				    (void __force **)&curr_bd->buf_token,
+				    EMAC_DEF_RX_CH);
+		if (curr_bd->data_ptr == NULL) {
+			dev_err(emac_dev, "DaVinci EMAC: RX buf mem alloc " \
+				"failed for ch %d\n", ch);
+			kfree(rxch);
+			return -ENOMEM;
+		}
+
+		/* populate the hardware descriptor */
+		curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head);
+		/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
+		curr_bd->buff_ptr = virt_to_phys(curr_bd->data_ptr);
+		curr_bd->off_b_len = rxch->buf_size;
+		curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
+
+		/* write back to hardware memory */
+		BD_CACHE_WRITEBACK_INVALIDATE((u32) curr_bd,
+					      EMAC_BD_LENGTH_FOR_CACHE);
+		curr_bd->next = rxch->active_queue_head;
+		rxch->active_queue_head = curr_bd;
+	}
+
+	/* At this point rxCppi->activeQueueHead points to the first
+	   RX BD ready to be given to RX HDP and rxch->active_queue_tail
+	   points to the last RX BD
+	 */
+	return 0;
+}
+
+/**
+ * emac_rxch_teardown: RX channel teardown
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device stop to teardown RX channel
+ *
+ */
+static void emac_rxch_teardown(struct emac_priv *priv, u32 ch)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */
+
+	while ((emac_read(EMAC_RXCP(ch)) & EMAC_TEARDOWN_VALUE) !=
+	       EMAC_TEARDOWN_VALUE) {
+		/* wait till tx teardown complete */
+		cpu_relax(); /* TODO: check if this helps ... */
+		--teardown_cnt;
+		if (0 == teardown_cnt) {
+			dev_err(emac_dev, "EMAC: RX teardown aborted\n");
+			break;
+		}
+	}
+	emac_write(EMAC_RXCP(ch), EMAC_TEARDOWN_VALUE);
+}
+
+/**
+ * emac_stop_rxch: Stop RX channel operation
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device stop to stop RX channel operation
+ *
+ */
+static void emac_stop_rxch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_rxch *rxch = priv->rxch[ch];
+
+	if (rxch) {
+		rxch->teardown_pending = 1;
+		emac_write(EMAC_RXTEARDOWN, ch);
+		/* wait for teardown complete */
+		emac_rxch_teardown(priv, ch);
+		rxch->teardown_pending = 0;
+		emac_write(EMAC_RXINTMASKCLEAR, BIT(ch));
+	}
+}
+
+/**
+ * emac_cleanup_rxch: Book-keep function to clean RX channel resources
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device stop to clean up RX channel resources
+ *
+ */
+static void emac_cleanup_rxch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_rxch *rxch = priv->rxch[ch];
+	struct emac_rx_bd __iomem *curr_bd;
+
+	if (rxch) {
+		/* free the receive buffers previously allocated */
+		curr_bd = rxch->active_queue_head;
+		while (curr_bd) {
+			if (curr_bd->buf_token) {
+				dev_kfree_skb_any((struct sk_buff *)\
+						  curr_bd->buf_token);
+			}
+			curr_bd = curr_bd->next;
+		}
+		if (rxch->bd_mem)
+			rxch->bd_mem = NULL;
+		kfree(rxch);
+		priv->rxch[ch] = NULL;
+	}
+}
+
+/**
+ * emac_set_type0addr: Set EMAC Type0 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type0 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	u32 val;
+	val = ((mac_addr[5] << 8) | (mac_addr[4]));
+	emac_write(EMAC_MACSRCADDRLO, val);
+
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACSRCADDRHI, val);
+	val = emac_read(EMAC_RXUNICASTSET);
+	val |= BIT(ch);
+	emac_write(EMAC_RXUNICASTSET, val);
+	val = emac_read(EMAC_RXUNICASTCLEAR);
+	val &= ~BIT(ch);
+	emac_write(EMAC_RXUNICASTCLEAR, val);
+}
+
+/**
+ * emac_set_type1addr: Set EMAC Type1 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type1 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	u32 val;
+	emac_write(EMAC_MACINDEX, ch);
+	val = ((mac_addr[5] << 8) | mac_addr[4]);
+	emac_write(EMAC_MACADDRLO, val);
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACADDRHI, val);
+	emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_set_type2addr: Set EMAC Type2 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ * @index: index into RX address entries
+ * @match: match parameter for RX address matching logic
+ *
+ * Called internally to set Type2 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type2addr(struct emac_priv *priv, u32 ch,
+			       char *mac_addr, int index, int match)
+{
+	u32 val;
+	emac_write(EMAC_MACINDEX, index);
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACADDRHI, val);
+	val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \
+	       (match << 19) | BIT(20));
+	emac_write(EMAC_MACADDRLO, val);
+	emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_setmac: Set mac address in the adapter (internal function)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+
+	if (priv->rx_addr_type == 0) {
+		emac_set_type0addr(priv, ch, mac_addr);
+	} else if (priv->rx_addr_type == 1) {
+		u32 cnt;
+		for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++)
+			emac_set_type1addr(priv, ch, mac_addr);
+	} else if (priv->rx_addr_type == 2) {
+		emac_set_type2addr(priv, ch, mac_addr, ch, 1);
+		emac_set_type0addr(priv, ch, mac_addr);
+	} else {
+		if (netif_msg_drv(priv))
+			dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n");
+	}
+}
+
+/**
+ * emac_dev_setmac_addr: Set mac address in the adapter
+ * @ndev: The DaVinci EMAC network adapter
+ * @addr: MAC address to set in device
+ *
+ * Called by the system to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct emac_rxch *rxch = priv->rxch[EMAC_DEF_RX_CH];
+	struct device *emac_dev = &priv->ndev->dev;
+	struct sockaddr *sa = addr;
+
+	/* Store mac addr in priv and rx channel and set it in EMAC hw */
+	memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
+	memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
+	memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
+	emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
+					priv->mac_addr);
+
+	return 0;
+}
+
+/**
+ * emac_addbd_to_rx_queue: Recycle RX buffer descriptor
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number to process buffer descriptors for
+ * @curr_bd: current buffer descriptor
+ * @buffer: buffer pointer for descriptor
+ * @buf_token: buffer token (stores skb information)
+ *
+ * Prepares the recycled buffer descriptor and addes it to hardware
+ * receive queue - if queue empty this descriptor becomes the head
+ * else addes the descriptor to end of queue
+ *
+ */
+static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch,
+		struct emac_rx_bd __iomem *curr_bd,
+		char *buffer, void *buf_token)
+{
+	struct emac_rxch *rxch = priv->rxch[ch];
+
+	/* populate the hardware descriptor */
+	curr_bd->h_next = 0;
+	/* FIXME buff_ptr = dma_map_single(... buffer ...) */
+	curr_bd->buff_ptr = virt_to_phys(buffer);
+	curr_bd->off_b_len = rxch->buf_size;
+	curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
+	curr_bd->next = NULL;
+	curr_bd->data_ptr = buffer;
+	curr_bd->buf_token = buf_token;
+
+	/* write back  */
+	BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+	if (rxch->active_queue_head == NULL) {
+		rxch->active_queue_head = curr_bd;
+		rxch->active_queue_tail = curr_bd;
+		if (0 != rxch->queue_active) {
+			emac_write(EMAC_RXHDP(ch),
+				   emac_virt_to_phys(rxch->active_queue_head));
+			rxch->queue_active = 1;
+		}
+	} else {
+		struct emac_rx_bd __iomem *tail_bd;
+		u32 frame_status;
+
+		tail_bd = rxch->active_queue_tail;
+		rxch->active_queue_tail = curr_bd;
+		tail_bd->next = curr_bd;
+		tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
+		tail_bd->h_next = emac_virt_to_phys(curr_bd);
+		frame_status = tail_bd->mode;
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			emac_write(EMAC_RXHDP(ch),
+					emac_virt_to_phys(curr_bd));
+			frame_status &= ~(EMAC_CPPI_EOQ_BIT);
+			tail_bd->mode = frame_status;
+			++rxch->end_of_queue_add;
+		}
+	}
+	++rxch->recycled_bd;
+}
+
+/**
+ * emac_net_rx_cb: Prepares packet and sends to upper layer
+ * @priv: The DaVinci EMAC private adapter structure
+ * @net_pkt_list: Network packet list (received packets)
+ *
+ * Invalidates packet buffer memory and sends the received packet to upper
+ * layer
+ *
+ * Returns success or appropriate error code (none as of now)
+ */
+static int emac_net_rx_cb(struct emac_priv *priv,
+			  struct emac_netpktobj *net_pkt_list)
+{
+	struct sk_buff *p_skb;
+	p_skb = (struct sk_buff *)net_pkt_list->pkt_token;
+	/* set length of packet */
+	skb_put(p_skb, net_pkt_list->pkt_length);
+	EMAC_CACHE_INVALIDATE((unsigned long)p_skb->data, p_skb->len);
+	p_skb->protocol = eth_type_trans(p_skb, priv->ndev);
+	p_skb->dev->last_rx = jiffies;
+	netif_receive_skb(p_skb);
+	priv->net_dev_stats.rx_bytes += net_pkt_list->pkt_length;
+	priv->net_dev_stats.rx_packets++;
+	return 0;
+}
+
+/**
+ * emac_rx_bdproc: RX buffer descriptor (packet) processing
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number to process buffer descriptors for
+ * @budget: number of packets allowed to process
+ * @pending: indication to caller that packets are pending to process
+ *
+ * Processes RX buffer descriptors - checks ownership bit on the RX buffer
+ * descriptor, sends the receive packet to upper layer, allocates a new SKB
+ * and recycles the buffer descriptor (requeues it in hardware RX queue).
+ * Only "budget" number of packets are processed and indication of pending
+ * packets provided to the caller.
+ *
+ * Returns number of packets processed (and indication of pending packets)
+ */
+static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
+{
+	unsigned long flags;
+	u32 frame_status;
+	u32 pkts_processed = 0;
+	char *new_buffer;
+	struct emac_rx_bd __iomem *curr_bd;
+	struct emac_rx_bd __iomem *last_bd;
+	struct emac_netpktobj *curr_pkt, pkt_obj;
+	struct emac_netbufobj buf_obj;
+	struct emac_netbufobj *rx_buf_obj;
+	void *new_buf_token;
+	struct emac_rxch *rxch = priv->rxch[ch];
+
+	if (unlikely(1 == rxch->teardown_pending))
+		return 0;
+	++rxch->proc_count;
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	pkt_obj.buf_list = &buf_obj;
+	curr_pkt = &pkt_obj;
+	curr_bd = rxch->active_queue_head;
+	BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+	frame_status = curr_bd->mode;
+
+	while ((curr_bd) &&
+	       ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
+	       (pkts_processed < budget)) {
+
+		new_buffer = emac_net_alloc_rx_buf(priv, rxch->buf_size,
+					&new_buf_token, EMAC_DEF_RX_CH);
+		if (unlikely(NULL == new_buffer)) {
+			++rxch->out_of_rx_buffers;
+			goto end_emac_rx_bdproc;
+		}
+
+		/* populate received packet data structure */
+		rx_buf_obj = &curr_pkt->buf_list[0];
+		rx_buf_obj->data_ptr = (char *)curr_bd->data_ptr;
+		rx_buf_obj->length = curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE;
+		rx_buf_obj->buf_token = curr_bd->buf_token;
+		curr_pkt->pkt_token = curr_pkt->buf_list->buf_token;
+		curr_pkt->num_bufs = 1;
+		curr_pkt->pkt_length =
+			(frame_status & EMAC_RX_BD_PKT_LENGTH_MASK);
+		emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd));
+		++rxch->processed_bd;
+		last_bd = curr_bd;
+		curr_bd = last_bd->next;
+		rxch->active_queue_head = curr_bd;
+
+		/* check if end of RX queue ? */
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			if (curr_bd) {
+				++rxch->mis_queued_packets;
+				emac_write(EMAC_RXHDP(ch),
+					   emac_virt_to_phys(curr_bd));
+			} else {
+				++rxch->end_of_queue;
+				rxch->queue_active = 0;
+			}
+		}
+
+		/* recycle BD */
+		emac_addbd_to_rx_queue(priv, ch, last_bd, new_buffer,
+				       new_buf_token);
+
+		/* return the packet to the user - BD ptr passed in
+		 * last parameter for potential *future* use */
+		spin_unlock_irqrestore(&priv->rx_lock, flags);
+		emac_net_rx_cb(priv, curr_pkt);
+		spin_lock_irqsave(&priv->rx_lock, flags);
+		curr_bd = rxch->active_queue_head;
+		if (curr_bd) {
+			BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+			frame_status = curr_bd->mode;
+		}
+		++pkts_processed;
+	}
+
+end_emac_rx_bdproc:
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	return pkts_processed;
+}
+
+/**
+ * emac_hw_enable: Enable EMAC hardware for packet transmission/reception
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enables EMAC hardware for packet processing - enables PHY, enables RX
+ * for packet reception and enables device interrupts and then NAPI
+ *
+ * Returns success (0) or appropriate error code (none right now)
+ */
+static int emac_hw_enable(struct emac_priv *priv)
+{
+	u32 ch, val, mbp_enable, mac_control;
+
+	/* Soft reset */
+	emac_write(EMAC_SOFTRESET, 1);
+	while (emac_read(EMAC_SOFTRESET))
+		cpu_relax();
+
+	/* Disable interrupt & Set pacing for more interrupts initially */
+	emac_int_disable(priv);
+
+	/* Full duplex enable bit set when auto negotiation happens */
+	mac_control =
+		(((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) |
+		((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) |
+		((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) |
+		((priv->duplex == DUPLEX_FULL) ? 0x1 : 0));
+	emac_write(EMAC_MACCONTROL, mac_control);
+
+	mbp_enable =
+		(((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) |
+		((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) |
+		 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) |
+		 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_PROMCH_SHIFT) |
+		 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) |
+		 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_BROADCH_SHIFT) |
+		 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) |
+		 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_MULTICH_SHIFT));
+	emac_write(EMAC_RXMBPENABLE, mbp_enable);
+	emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE &
+				   EMAC_RX_MAX_LEN_MASK));
+	emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET &
+					 EMAC_RX_BUFFER_OFFSET_MASK));
+	emac_write(EMAC_RXFILTERLOWTHRESH, 0);
+	emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL);
+	priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF;
+
+	val = emac_read(EMAC_TXCONTROL);
+	val |= EMAC_TX_CONTROL_TX_ENABLE_VAL;
+	emac_write(EMAC_TXCONTROL, val);
+	val = emac_read(EMAC_RXCONTROL);
+	val |= EMAC_RX_CONTROL_RX_ENABLE_VAL;
+	emac_write(EMAC_RXCONTROL, val);
+	emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL);
+
+	for (ch = 0; ch < EMAC_DEF_MAX_TX_CH; ch++) {
+		emac_write(EMAC_TXHDP(ch), 0);
+		emac_write(EMAC_TXINTMASKSET, BIT(ch));
+	}
+	for (ch = 0; ch < EMAC_DEF_MAX_RX_CH; ch++) {
+		struct emac_rxch *rxch = priv->rxch[ch];
+		emac_setmac(priv, ch, rxch->mac_addr);
+		emac_write(EMAC_RXINTMASKSET, BIT(ch));
+		rxch->queue_active = 1;
+		emac_write(EMAC_RXHDP(ch),
+			   emac_virt_to_phys(rxch->active_queue_head));
+	}
+
+	/* Enable MII */
+	val = emac_read(EMAC_MACCONTROL);
+	val |= (EMAC_MACCONTROL_MIIEN);
+	emac_write(EMAC_MACCONTROL, val);
+
+	/* Enable NAPI and interrupts */
+	napi_enable(&priv->napi);
+	emac_int_enable(priv);
+	return 0;
+
+}
+
+/**
+ * emac_poll: EMAC NAPI Poll function
+ * @ndev: The DaVinci EMAC network adapter
+ * @budget: Number of receive packets to process (as told by NAPI layer)
+ *
+ * NAPI Poll function implemented to process packets as per budget. We check
+ * the type of interrupt on the device and accordingly call the TX or RX
+ * packet processing functions. We follow the budget for RX processing and
+ * also put a cap on number of TX pkts processed through config param. The
+ * NAPI schedule function is called if more packets pending.
+ *
+ * Returns number of packets received (in most cases; else TX pkts - rarely)
+ */
+static int emac_poll(struct napi_struct *napi, int budget)
+{
+	unsigned int mask;
+	struct emac_priv *priv = container_of(napi, struct emac_priv, napi);
+	struct net_device *ndev = priv->ndev;
+	struct device *emac_dev = &ndev->dev;
+	u32 status = 0;
+	u32 num_pkts = 0;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	/* Check interrupt vectors and call packet processing */
+	status = emac_read(EMAC_MACINVECTOR);
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC;
+
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
+
+	if (status & mask) {
+		num_pkts = emac_tx_bdproc(priv, EMAC_DEF_TX_CH,
+					  EMAC_DEF_TX_MAX_SERVICE);
+	} /* TX processing */
+
+	if (num_pkts)
+		return budget;
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
+
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC;
+
+	if (status & mask) {
+		num_pkts = emac_rx_bdproc(priv, EMAC_DEF_RX_CH, budget);
+	} /* RX processing */
+
+	if (num_pkts < budget) {
+		napi_complete(napi);
+		emac_int_enable(priv);
+	}
+
+	if (unlikely(status & EMAC_DM644X_MAC_IN_VECTOR_HOST_INT)) {
+		u32 ch, cause;
+		dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
+		netif_stop_queue(ndev);
+		napi_disable(&priv->napi);
+
+		status = emac_read(EMAC_MACSTATUS);
+		cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >>
+			 EMAC_MACSTATUS_TXERRCODE_SHIFT);
+		if (cause) {
+			ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >>
+			      EMAC_MACSTATUS_TXERRCH_SHIFT);
+			if (net_ratelimit()) {
+				dev_err(emac_dev, "TX Host error %s on ch=%d\n",
+					&emac_txhost_errcodes[cause][0], ch);
+			}
+		}
+		cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >>
+			 EMAC_MACSTATUS_RXERRCODE_SHIFT);
+		if (cause) {
+			ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >>
+			      EMAC_MACSTATUS_RXERRCH_SHIFT);
+			if (netif_msg_hw(priv) && net_ratelimit())
+				dev_err(emac_dev, "RX Host error %s on ch=%d\n",
+					&emac_rxhost_errcodes[cause][0], ch);
+		}
+	} /* Host error processing */
+
+	return num_pkts;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * emac_poll_controller: EMAC Poll controller function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Polled functionality used by netconsole and others in non interrupt mode
+ *
+ */
+void emac_poll_controller(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	emac_int_disable(priv);
+	emac_irq(ndev->irq, priv);
+	emac_int_enable(priv);
+}
+#endif
+
+/* PHY/MII bus related */
+
+/* Wait until mdio is ready for next command */
+#define MDIO_WAIT_FOR_USER_ACCESS\
+		while ((emac_mdio_read((MDIO_USERACCESS(0))) &\
+			MDIO_USERACCESS_GO) != 0)
+
+static int emac_mii_read(struct mii_bus *bus, int phy_id, int phy_reg)
+{
+	unsigned int phy_data = 0;
+	unsigned int phy_control;
+
+	/* Wait until mdio is ready for next command */
+	MDIO_WAIT_FOR_USER_ACCESS;
+
+	phy_control = (MDIO_USERACCESS_GO |
+		       MDIO_USERACCESS_READ |
+		       ((phy_reg << 21) & MDIO_USERACCESS_REGADR) |
+		       ((phy_id << 16) & MDIO_USERACCESS_PHYADR) |
+		       (phy_data & MDIO_USERACCESS_DATA));
+	emac_mdio_write(MDIO_USERACCESS(0), phy_control);
+
+	/* Wait until mdio is ready for next command */
+	MDIO_WAIT_FOR_USER_ACCESS;
+
+	return emac_mdio_read(MDIO_USERACCESS(0)) & MDIO_USERACCESS_DATA;
+
+}
+
+static int emac_mii_write(struct mii_bus *bus, int phy_id,
+			  int phy_reg, u16 phy_data)
+{
+
+	unsigned int control;
+
+	/*  until mdio is ready for next command */
+	MDIO_WAIT_FOR_USER_ACCESS;
+
+	control = (MDIO_USERACCESS_GO |
+		   MDIO_USERACCESS_WRITE |
+		   ((phy_reg << 21) & MDIO_USERACCESS_REGADR) |
+		   ((phy_id << 16) & MDIO_USERACCESS_PHYADR) |
+		   (phy_data & MDIO_USERACCESS_DATA));
+	emac_mdio_write(MDIO_USERACCESS(0), control);
+
+	return 0;
+}
+
+static int emac_mii_reset(struct mii_bus *bus)
+{
+	unsigned int clk_div;
+	int mdio_bus_freq = emac_bus_frequency;
+
+	if (mdio_max_freq & mdio_bus_freq)
+		clk_div = ((mdio_bus_freq / mdio_max_freq) - 1);
+	else
+		clk_div = 0xFF;
+
+	clk_div &= MDIO_CONTROL_CLKDIV;
+
+	/* Set enable and clock divider in MDIOControl */
+	emac_mdio_write(MDIO_CONTROL, (clk_div | MDIO_CONTROL_ENABLE));
+
+	return 0;
+
+}
+
+static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, PHY_POLL };
+
+/* emac_driver: EMAC MII bus structure */
+
+static struct mii_bus *emac_mii;
+
+static void emac_adjust_link(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+	unsigned long flags;
+	int new_state = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (phydev->link) {
+		/* check the mode of operation - full/half duplex */
+		if (phydev->duplex != priv->duplex) {
+			new_state = 1;
+			priv->duplex = phydev->duplex;
+		}
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			priv->speed = phydev->speed;
+		}
+		if (!priv->link) {
+			new_state = 1;
+			priv->link = 1;
+		}
+
+	} else if (priv->link) {
+		new_state = 1;
+		priv->link = 0;
+		priv->speed = 0;
+		priv->duplex = ~0;
+	}
+	if (new_state) {
+		emac_update_phystatus(priv);
+		phy_print_status(priv->phydev);
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/*************************************************************************
+ *  Linux Driver Model
+ *************************************************************************/
+
+/**
+ * emac_devioctl: EMAC adapter ioctl
+ * @ndev: The DaVinci EMAC network adapter
+ * @ifrq: request parameter
+ * @cmd: command parameter
+ *
+ * EMAC driver ioctl function
+ *
+ * Returns success(0) or appropriate error code
+ */
+static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
+{
+	dev_warn(&ndev->dev, "DaVinci EMAC: ioctl not supported\n");
+
+	if (!(netif_running(ndev)))
+		return -EINVAL;
+
+	/* TODO: Add phy read and write and private statistics get feature */
+
+	return -EOPNOTSUPP;
+}
+
+/**
+ * emac_dev_open: EMAC device open
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to start the interface. We init TX/RX channels
+ * and enable the hardware for packet reception/transmission and start the
+ * network queue.
+ *
+ * Returns 0 for a successful open, or appropriate error code
+ */
+static int emac_dev_open(struct net_device *ndev)
+{
+	struct device *emac_dev = &ndev->dev;
+	u32 rc, cnt, ch;
+	int phy_addr;
+	struct resource *res;
+	int q, m;
+	int i = 0;
+	int k = 0;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	netif_carrier_off(ndev);
+	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
+
+	/* Configuration items */
+	priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN;
+
+	/* Clear basic hardware */
+	for (ch = 0; ch < EMAC_MAX_TXRX_CHANNELS; ch++) {
+		emac_write(EMAC_TXHDP(ch), 0);
+		emac_write(EMAC_RXHDP(ch), 0);
+		emac_write(EMAC_RXHDP(ch), 0);
+		emac_write(EMAC_RXINTMASKCLEAR, EMAC_INT_MASK_CLEAR);
+		emac_write(EMAC_TXINTMASKCLEAR, EMAC_INT_MASK_CLEAR);
+	}
+	priv->mac_hash1 = 0;
+	priv->mac_hash2 = 0;
+	emac_write(EMAC_MACHASH1, 0);
+	emac_write(EMAC_MACHASH2, 0);
+
+	/* multi ch not supported - open 1 TX, 1RX ch by default */
+	rc = emac_init_txch(priv, EMAC_DEF_TX_CH);
+	if (0 != rc) {
+		dev_err(emac_dev, "DaVinci EMAC: emac_init_txch() failed");
+		return rc;
+	}
+	rc = emac_init_rxch(priv, EMAC_DEF_RX_CH, priv->mac_addr);
+	if (0 != rc) {
+		dev_err(emac_dev, "DaVinci EMAC: emac_init_rxch() failed");
+		return rc;
+	}
+
+	/* Request IRQ */
+
+	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
+		for (i = res->start; i <= res->end; i++) {
+			if (request_irq(i, emac_irq, IRQF_DISABLED,
+					ndev->name, ndev))
+				goto rollback;
+		}
+		k++;
+	}
+
+	/* Start/Enable EMAC hardware */
+	emac_hw_enable(priv);
+
+	/* find the first phy */
+	priv->phydev = NULL;
+	if (priv->phy_mask) {
+		emac_mii_reset(priv->mii_bus);
+		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+			if (priv->mii_bus->phy_map[phy_addr]) {
+				priv->phydev = priv->mii_bus->phy_map[phy_addr];
+				break;
+			}
+		}
+
+		if (!priv->phydev) {
+			printk(KERN_ERR "%s: no PHY found\n", ndev->name);
+			return -1;
+		}
+
+		priv->phydev = phy_connect(ndev, dev_name(&priv->phydev->dev),
+				&emac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+
+		if (IS_ERR(priv->phydev)) {
+			printk(KERN_ERR "%s: Could not attach to PHY\n",
+								ndev->name);
+			return PTR_ERR(priv->phydev);
+		}
+
+		priv->link = 0;
+		priv->speed = 0;
+		priv->duplex = ~0;
+
+		printk(KERN_INFO "%s: attached PHY driver [%s] "
+			"(mii_bus:phy_addr=%s, id=%x)\n", ndev->name,
+			priv->phydev->drv->name, dev_name(&priv->phydev->dev),
+			priv->phydev->phy_id);
+	} else{
+		/* No PHY , fix the link, speed and duplex settings */
+		priv->link = 1;
+		priv->speed = SPEED_100;
+		priv->duplex = DUPLEX_FULL;
+		emac_update_phystatus(priv);
+	}
+
+	if (!netif_running(ndev)) /* debug only - to avoid compiler warning */
+		emac_dump_regs(priv);
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
+
+	if (priv->phy_mask)
+		phy_start(priv->phydev);
+
+	return 0;
+
+rollback:
+
+	dev_err(emac_dev, "DaVinci EMAC: request_irq() failed");
+
+	for (q = k; k >= 0; k--) {
+		for (m = i; m >= res->start; m--)
+			free_irq(m, ndev);
+		res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
+		m = res->end;
+	}
+	return -EBUSY;
+}
+
+/**
+ * emac_dev_stop: EMAC device stop
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to stop or down the interface. We stop the network
+ * queue, disable interrupts and cleanup TX/RX channels.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static int emac_dev_stop(struct net_device *ndev)
+{
+	struct resource *res;
+	int i = 0;
+	int irq_num;
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &ndev->dev;
+
+	/* inform the upper layers. */
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+
+	netif_carrier_off(ndev);
+	emac_int_disable(priv);
+	emac_stop_txch(priv, EMAC_DEF_TX_CH);
+	emac_stop_rxch(priv, EMAC_DEF_RX_CH);
+	emac_cleanup_txch(priv, EMAC_DEF_TX_CH);
+	emac_cleanup_rxch(priv, EMAC_DEF_RX_CH);
+	emac_write(EMAC_SOFTRESET, 1);
+
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
+
+	/* Free IRQ */
+	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
+		for (irq_num = res->start; irq_num <= res->end; irq_num++)
+			free_irq(irq_num, priv->ndev);
+		i++;
+	}
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
+
+	return 0;
+}
+
+/**
+ * emac_dev_getnetstats: EMAC get statistics function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to get statistics from the device.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	/* update emac hardware stats and reset the registers*/
+
+	priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
+	emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) +
+					   emac_read(EMAC_TXSINGLECOLL) +
+					   emac_read(EMAC_TXMULTICOLL));
+	emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
+						emac_read(EMAC_RXJABBER) +
+						emac_read(EMAC_RXUNDERSIZED));
+	emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
+					       emac_read(EMAC_RXMOFOVERRUNS));
+	emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
+	emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.tx_carrier_errors +=
+		emac_read(EMAC_TXCARRIERSENSE);
+	emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN);
+	emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE);
+
+	return &priv->net_dev_stats;
+}
+
+static const struct net_device_ops emac_netdev_ops = {
+	.ndo_open		= emac_dev_open,
+	.ndo_stop		= emac_dev_stop,
+	.ndo_start_xmit		= emac_dev_xmit,
+	.ndo_set_multicast_list	= emac_dev_mcast_set,
+	.ndo_set_mac_address	= emac_dev_setmac_addr,
+	.ndo_do_ioctl		= emac_devioctl,
+	.ndo_tx_timeout		= emac_dev_tx_timeout,
+	.ndo_get_stats		= emac_dev_getnetstats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= emac_poll_controller,
+#endif
+};
+
+/**
+ * davinci_emac_probe: EMAC device probe
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when probing for emac devicesr. We get details of instances and
+ * resource information from platform init and register a network device
+ * and allocate resources necessary for driver to perform
+ */
+static int __devinit davinci_emac_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct resource *res;
+	struct net_device *ndev;
+	struct emac_priv *priv;
+	unsigned long size;
+	struct emac_platform_data *pdata;
+	struct device *emac_dev;
+
+	/* obtain emac clock from kernel */
+	emac_clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(emac_clk)) {
+		printk(KERN_ERR "DaVinci EMAC: Failed to get EMAC clock\n");
+		return -EBUSY;
+	}
+	emac_bus_frequency = clk_get_rate(emac_clk);
+	/* TODO: Probe PHY here if possible */
+
+	ndev = alloc_etherdev(sizeof(struct emac_priv));
+	if (!ndev) {
+		printk(KERN_ERR "DaVinci EMAC: Error allocating net_device\n");
+		clk_put(emac_clk);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, ndev);
+	priv = netdev_priv(ndev);
+	priv->pdev = pdev;
+	priv->ndev = ndev;
+	priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
+
+	spin_lock_init(&priv->tx_lock);
+	spin_lock_init(&priv->rx_lock);
+	spin_lock_init(&priv->lock);
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		printk(KERN_ERR "DaVinci EMAC: No platfrom data\n");
+		return -ENODEV;
+	}
+
+	/* MAC addr and PHY mask , RMII enable info from platform_data */
+	memcpy(priv->mac_addr, pdata->mac_addr, 6);
+	priv->phy_mask = pdata->phy_mask;
+	priv->rmii_en = pdata->rmii_en;
+	priv->version = pdata->version;
+	emac_dev = &ndev->dev;
+	/* Get EMAC platform data */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(emac_dev, "DaVinci EMAC: Error getting res\n");
+		rc = -ENOENT;
+		goto probe_quit;
+	}
+
+	priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
+	size = res->end - res->start + 1;
+	if (!request_mem_region(res->start, size, ndev->name)) {
+		dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() \
+					 for regs\n");
+		rc = -ENXIO;
+		goto probe_quit;
+	}
+
+	priv->remap_addr = ioremap(res->start, size);
+	if (!priv->remap_addr) {
+		dev_err(emac_dev, "Unable to map IO\n");
+		rc = -ENOMEM;
+		release_mem_region(res->start, size);
+		goto probe_quit;
+	}
+	priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
+	ndev->base_addr = (unsigned long)priv->remap_addr;
+
+	priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
+	priv->ctrl_ram_size = pdata->ctrl_ram_size;
+	priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n");
+		rc = -ENOENT;
+		goto no_irq_res;
+	}
+	ndev->irq = res->start;
+
+	if (!is_valid_ether_addr(priv->mac_addr)) {
+		/* Use random MAC if none passed */
+		random_ether_addr(priv->mac_addr);
+		printk(KERN_WARNING "%s: using random MAC addr: %pM\n",
+				__func__, priv->mac_addr);
+	}
+
+	ndev->netdev_ops = &emac_netdev_ops;
+	SET_ETHTOOL_OPS(ndev, &ethtool_ops);
+	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+
+	/* register the network device */
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	rc = register_netdev(ndev);
+	if (rc) {
+		dev_err(emac_dev, "DaVinci EMAC: Error in register_netdev\n");
+		rc = -ENODEV;
+		goto netdev_reg_err;
+	}
+
+	clk_enable(emac_clk);
+
+	/* MII/Phy intialisation, mdio bus registration */
+	emac_mii = mdiobus_alloc();
+	if (emac_mii == NULL) {
+		dev_err(emac_dev, "DaVinci EMAC: Error allocating mii_bus\n");
+		rc = -ENOMEM;
+		goto mdio_alloc_err;
+	}
+
+	priv->mii_bus = emac_mii;
+	emac_mii->name  = "emac-mii",
+	emac_mii->read  = emac_mii_read,
+	emac_mii->write = emac_mii_write,
+	emac_mii->reset = emac_mii_reset,
+	emac_mii->irq   = mii_irqs,
+	emac_mii->phy_mask = ~(priv->phy_mask);
+	emac_mii->parent = &pdev->dev;
+	emac_mii->priv = priv->remap_addr + pdata->mdio_reg_offset;
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", priv->pdev->id);
+	mdio_max_freq = pdata->mdio_max_freq;
+	emac_mii->reset(emac_mii);
+
+	/* Register the MII bus */
+	rc = mdiobus_register(emac_mii);
+	if (rc)
+		goto mdiobus_quit;
+
+	if (netif_msg_probe(priv)) {
+		dev_notice(emac_dev, "DaVinci EMAC Probe found device "\
+			   "(regs: %p, irq: %d)\n",
+			   (void *)priv->emac_base_phys, ndev->irq);
+	}
+	return 0;
+
+mdiobus_quit:
+	mdiobus_free(emac_mii);
+
+netdev_reg_err:
+mdio_alloc_err:
+no_irq_res:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	iounmap(priv->remap_addr);
+
+probe_quit:
+	clk_put(emac_clk);
+	free_netdev(ndev);
+	return rc;
+}
+
+/**
+ * davinci_emac_remove: EMAC device remove
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when removing the device driver. We disable clock usage and release
+ * the resources taken up by the driver and unregister network device
+ */
+static int __devexit davinci_emac_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
+
+	clk_disable(emac_clk);
+	platform_set_drvdata(pdev, NULL);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mdiobus_unregister(priv->mii_bus);
+	mdiobus_free(priv->mii_bus);
+
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	unregister_netdev(ndev);
+	free_netdev(ndev);
+	iounmap(priv->remap_addr);
+
+	clk_disable(emac_clk);
+	clk_put(emac_clk);
+
+	return 0;
+}
+
+/**
+ * davinci_emac_driver: EMAC platform driver structure
+ *
+ * We implement only probe and remove functions - suspend/resume and
+ * others not supported by this module
+ */
+static struct platform_driver davinci_emac_driver = {
+	.driver = {
+		.name	 = "davinci_emac",
+		.owner	 = THIS_MODULE,
+	},
+	.probe = davinci_emac_probe,
+	.remove = __devexit_p(davinci_emac_remove),
+};
+
+/**
+ * davinci_emac_init: EMAC driver module init
+ *
+ * Called when initializing the driver. We register the driver with
+ * the platform.
+ */
+static int __init davinci_emac_init(void)
+{
+	return platform_driver_register(&davinci_emac_driver);
+}
+module_init(davinci_emac_init);
+
+/**
+ * davinci_emac_exit: EMAC driver module exit
+ *
+ * Called when exiting the driver completely. We unregister the driver with
+ * the platform and exit
+ */
+static void __exit davinci_emac_exit(void)
+{
+	platform_driver_unregister(&davinci_emac_driver);
+}
+module_exit(davinci_emac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>");
+MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver");
diff --git a/drivers/net/de600.c b/drivers/net/de600.c
index de63f1d41d3..e1af089064b 100644
--- a/drivers/net/de600.c
+++ b/drivers/net/de600.c
@@ -38,14 +38,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj
 /* Add more time here if your adapter won't work OK: */
 #define DE600_SLOW_DOWN	udelay(delay_time)
 
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifdef DE600_DEBUG
-#define PRINTK(x) if (de600_debug >= 2) printk x
-#else
-#define DE600_DEBUG 0
-#define PRINTK(x) /**/
-#endif
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -67,10 +59,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj
 
 #include "de600.h"
 
-static unsigned int de600_debug = DE600_DEBUG;
-module_param(de600_debug, int, 0);
-MODULE_PARM_DESC(de600_debug, "DE-600 debug level (0-2)");
-
 static unsigned int check_lost = 1;
 module_param(check_lost, bool, 0);
 MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
@@ -180,20 +168,20 @@ static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (free_tx_pages <= 0) {	/* Do timeouts, to avoid hangs. */
 		tickssofar = jiffies - dev->trans_start;
 		if (tickssofar < 5)
-			return 1;
+			return NETDEV_TX_BUSY;
 		/* else */
 		printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
 		/* Restart the adapter. */
 		spin_lock_irqsave(&de600_lock, flags);
 		if (adapter_init(dev)) {
 			spin_unlock_irqrestore(&de600_lock, flags);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 		spin_unlock_irqrestore(&de600_lock, flags);
 	}
 
 	/* Start real output */
-	PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
+	pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages);
 
 	if ((len = skb->len) < RUNT)
 		len = RUNT;
@@ -211,7 +199,7 @@ static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
 			if (adapter_init(dev)) {
 				spin_unlock_irqrestore(&de600_lock, flags);
-				return 1;
+				return NETDEV_TX_BUSY;
 			}
 		}
 	}
@@ -259,7 +247,7 @@ static irqreturn_t de600_interrupt(int irq, void *dev_id)
 	irq_status = de600_read_status(dev);
 
 	do {
-		PRINTK(("de600_interrupt (%02X)\n", irq_status));
+		pr_debug("de600_interrupt (%02X)\n", irq_status);
 
 		if (irq_status & RX_GOOD)
 			de600_rx_intr(dev);
@@ -407,8 +395,7 @@ static struct net_device * __init de600_probe(void)
 
 	printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
 	/* Alpha testers must have the version number to report bugs. */
-	if (de600_debug > 1)
-		printk(version);
+	pr_debug("%s", version);
 
 	/* probe for adapter */
 	err = -ENODEV;
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index d52f34cc952..55d2bb67cff 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -48,7 +48,6 @@ static const char version[] =
  * Compile-time options: (see below for descriptions)
  * -DDE620_IO=0x378	(lpt1)
  * -DDE620_IRQ=7	(lpt1)
- * -DDE602_DEBUG=...
  * -DSHUTDOWN_WHEN_LOST
  * -DCOUNT_LOOPS
  * -DLOWSPEED
@@ -98,15 +97,6 @@ static const char version[] =
 #define SHUTDOWN_WHEN_LOST
  */
 
-/*
- * Enable debugging by "-DDE620_DEBUG=3" when compiling,
- * OR by enabling the following #define
- *
- * use 0 for production, 1 for verification, >2 for debug
- *
-#define DE620_DEBUG 3
- */
-
 #ifdef LOWSPEED
 /*
  * Enable this #define if you want to see debugging output that show how long
@@ -160,14 +150,6 @@ typedef unsigned char byte;
 #define RUNT 60		/* Too small Ethernet packet */
 #define GIANT 1514	/* largest legal size packet, no fcs */
 
-#ifdef DE620_DEBUG /* Compile-time configurable */
-#define PRINTK(x) if (de620_debug >= 2) printk x
-#else
-#define DE620_DEBUG 0
-#define PRINTK(x) /**/
-#endif
-
-
 /*
  * Force media with insmod:
  *	insmod de620.o bnc=1
@@ -186,8 +168,6 @@ static int io  = DE620_IO;
 static int irq = DE620_IRQ;
 static int clone = DE620_CLONE;
 
-static unsigned int de620_debug = DE620_DEBUG;
-
 static spinlock_t de620_lock;
 
 module_param(bnc, int, 0);
@@ -195,13 +175,11 @@ module_param(utp, int, 0);
 module_param(io, int, 0);
 module_param(irq, int, 0);
 module_param(clone, int, 0);
-module_param(de620_debug, int, 0);
 MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)");
 MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)");
 MODULE_PARM_DESC(io, "DE-620 I/O base address,required");
 MODULE_PARM_DESC(irq, "DE-620 IRQ number,required");
 MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)");
-MODULE_PARM_DESC(de620_debug, "DE-620 debug level (0-2)");
 
 /***********************************************
  *                                             *
@@ -533,9 +511,9 @@ static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Start real output */
 
-	spin_lock_irqsave(&de620_lock, flags)
-	PRINTK(("de620_start_xmit: len=%d, bufs 0x%02x\n",
-		(int)skb->len, using_txbuf));
+	spin_lock_irqsave(&de620_lock, flags);
+	pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n",
+		(int)skb->len, using_txbuf);
 
 	/* select a free tx buffer. if there is one... */
 	switch (using_txbuf) {
@@ -553,7 +531,7 @@ static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	case (TXBF0 | TXBF1): /* NONE!!! */
 		printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name);
 		spin_unlock_irqrestore(&de620_lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	de620_write_block(dev, buffer, skb->len, len-skb->len);
 
@@ -585,12 +563,12 @@ de620_interrupt(int irq_in, void *dev_id)
 	/* Read the status register (_not_ the status port) */
 	irq_status = de620_get_register(dev, R_STS);
 
-	PRINTK(("de620_interrupt (%2.2X)\n", irq_status));
+	pr_debug("de620_interrupt (%2.2X)\n", irq_status);
 
 	if (irq_status & RXGOOD) {
 		do {
 			again = de620_rx_intr(dev);
-			PRINTK(("again=%d\n", again));
+			pr_debug("again=%d\n", again);
 		}
 		while (again && (++bogus_count < 100));
 	}
@@ -622,7 +600,7 @@ static int de620_rx_intr(struct net_device *dev)
 	byte pagelink;
 	byte curr_page;
 
-	PRINTK(("de620_rx_intr: next_rx_page = %d\n", next_rx_page));
+	pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page);
 
 	/* Tell the adapter that we are going to read data, and from where */
 	de620_send_command(dev, W_CR | RRN);
@@ -631,8 +609,9 @@ static int de620_rx_intr(struct net_device *dev)
 
 	/* Deep breath, and away we goooooo */
 	de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf));
-	PRINTK(("page status=0x%02x, nextpage=%d, packetsize=%d\n",
-	header_buf.status, header_buf.Rx_NextPage, header_buf.Rx_ByteCount));
+	pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n",
+		header_buf.status, header_buf.Rx_NextPage,
+		header_buf.Rx_ByteCount);
 
 	/* Plausible page header? */
 	pagelink = header_buf.Rx_NextPage;
@@ -683,7 +662,7 @@ static int de620_rx_intr(struct net_device *dev)
 			buffer = skb_put(skb,size);
 			/* copy the packet into the buffer */
 			de620_read_block(dev, buffer, size);
-			PRINTK(("Read %d bytes\n", size));
+			pr_debug("Read %d bytes\n", size);
 			skb->protocol=eth_type_trans(skb,dev);
 			netif_rx(skb); /* deliver it "upstairs" */
 			/* count all receives */
@@ -696,7 +675,7 @@ static int de620_rx_intr(struct net_device *dev)
 	/* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */
 	curr_page = de620_get_register(dev, R_CPR);
 	de620_set_register(dev, W_NPRF, next_rx_page);
-	PRINTK(("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page));
+	pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page);
 
 	return (next_rx_page != curr_page); /* That was slightly tricky... */
 }
@@ -830,8 +809,7 @@ struct net_device * __init de620_probe(int unit)
 		netdev_boot_setup_check(dev);
 	}
 
-	if (de620_debug)
-		printk(version);
+	pr_debug("%s", version);
 
 	printk(KERN_INFO "D-Link DE-620 pocket adapter");
 
@@ -878,14 +856,13 @@ struct net_device * __init de620_probe(int unit)
 	/* base_addr and irq are already set, see above! */
 
 	/* dump eeprom */
-	if (de620_debug) {
-		printk("\nEEPROM contents:\n");
-		printk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);
-		printk("NodeID = %pM\n", nic_data.NodeID);
-		printk("Model = %d\n", nic_data.Model);
-		printk("Media = %d\n", nic_data.Media);
-		printk("SCR = 0x%02x\n", nic_data.SCR);
-	}
+	pr_debug("\nEEPROM contents:\n"
+		"RAM_Size = 0x%02X\n"
+		"NodeID = %pM\n"
+		"Model = %d\n"
+		"Media = %d\n"
+		"SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID,
+		nic_data.Model, nic_data.Media, nic_data.SCR);
 
 	err = register_netdev(dev);
 	if (err)
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index b62405a6918..2b22e580c4d 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -895,6 +895,7 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct lance_private *lp = netdev_priv(dev);
 	volatile struct lance_regs *ll = lp->ll;
 	volatile u16 *ib = (volatile u16 *)dev->mem_start;
+	unsigned long flags;
 	int entry, len;
 
 	len = skb->len;
@@ -907,6 +908,8 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev->stats.tx_bytes += len;
 
+	spin_lock_irqsave(&lp->lock, flags);
+
 	entry = lp->tx_new;
 	*lib_ptr(ib, btx_ring[entry].length, lp->type) = (-len);
 	*lib_ptr(ib, btx_ring[entry].misc, lp->type) = 0;
@@ -925,6 +928,8 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Kick the lance: transmit now */
 	writereg(&ll->rdp, LE_C0_INEA | LE_C0_TDMD);
 
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	dev->trans_start = jiffies;
 	dev_kfree_skb(skb);
 
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 4ec055dc717..102b8d43971 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -3318,7 +3318,7 @@ static int dfx_xmt_queue_pkt(
 	{
 		skb_pull(skb,3);
 		spin_unlock_irqrestore(&bp->lock, flags);
-		return(1);			/* requeue packet for later */
+		return NETDEV_TX_BUSY;	/* requeue packet for later */
 	}
 
 	/*
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 357f565851e..97ea2d6d3fe 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -810,7 +810,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 
 	dev->mem_start = 0;
 
-	device->driver_data = dev;
+	dev_set_drvdata(device, dev);
 	SET_NETDEV_DEV (dev, device);
 
 	status = register_netdev(dev);
@@ -957,7 +957,7 @@ static int depca_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (TX_BUFFS_AVAIL)
 			netif_start_queue(dev);
 	} else
-		status = -1;
+		status = NETDEV_TX_LOCKED;
 
       out:
 	return status;
@@ -1614,7 +1614,7 @@ static int __devexit depca_device_remove (struct device *device)
 	struct depca_private *lp;
 	int bus;
 
-	dev  = device->driver_data;
+	dev  = dev_get_drvdata(device);
 	lp   = netdev_priv(dev);
 
 	unregister_netdev (dev);
@@ -1839,7 +1839,7 @@ static int load_packet(struct net_device *dev, struct sk_buff *skb)
 
 		lp->tx_new = (++end) & lp->txRingMask;	/* update current pointers */
 	} else {
-		status = -1;
+		status = NETDEV_TX_LOCKED;
 	}
 
 	return status;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 4a1b554654e..895d72143ee 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -539,7 +539,7 @@ rio_tx_timeout (struct net_device *dev)
 		dev->name, readl (ioaddr + TxStatus));
 	rio_free_tx(dev, 0);
 	dev->if_port = 0;
-	dev->trans_start = jiffies;
+	dev->trans_start = jiffies; /* prevent tx timeout */
 }
 
  /* allocate and initialize Tx and Rx descriptors */
@@ -610,7 +610,7 @@ start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 	if (np->link_status == 0) {	/* Link Down */
 		dev_kfree_skb(skb);
-		return 0;
+		return NETDEV_TX_OK;
 	}
 	ioaddr = dev->base_addr;
 	entry = np->cur_tx % TX_RING_SIZE;
@@ -665,9 +665,7 @@ start_xmit (struct sk_buff *skb, struct net_device *dev)
 		writel (0, dev->base_addr + TFDListPtr1);
 	}
 
-	/* NETDEV WATCHDOG timer */
-	dev->trans_start = jiffies;
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static irqreturn_t
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d8350860c0f..dd771dea6ae 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -756,7 +756,7 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dm9000_dbg(db, 3, "%s:\n", __func__);
 
 	if (db->tx_pkt_cnt > 1)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	spin_lock_irqsave(&db->lock, flags);
 
@@ -1170,6 +1170,21 @@ dm9000_stop(struct net_device *ndev)
 	return 0;
 }
 
+static const struct net_device_ops dm9000_netdev_ops = {
+	.ndo_open		= dm9000_open,
+	.ndo_stop		= dm9000_stop,
+	.ndo_start_xmit		= dm9000_start_xmit,
+	.ndo_tx_timeout		= dm9000_timeout,
+	.ndo_set_multicast_list	= dm9000_hash_table,
+	.ndo_do_ioctl		= dm9000_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= dm9000_poll_controller,
+#endif
+};
+
 #define res_size(_r) (((_r)->end - (_r)->start) + 1)
 
 /*
@@ -1339,18 +1354,9 @@ dm9000_probe(struct platform_device *pdev)
 	/* driver system function */
 	ether_setup(ndev);
 
-	ndev->open		 = &dm9000_open;
-	ndev->hard_start_xmit    = &dm9000_start_xmit;
-	ndev->tx_timeout         = &dm9000_timeout;
-	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
-	ndev->stop		 = &dm9000_stop;
-	ndev->set_multicast_list = &dm9000_hash_table;
-	ndev->ethtool_ops	 = &dm9000_ethtool_ops;
-	ndev->do_ioctl		 = &dm9000_ioctl;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller	 = &dm9000_poll_controller;
-#endif
+	ndev->netdev_ops	= &dm9000_netdev_ops;
+	ndev->watchdog_timeo	= msecs_to_jiffies(watchdog);
+	ndev->ethtool_ops	= &dm9000_ethtool_ops;
 
 	db->msg_enable       = NETIF_MSG_LINK;
 	db->mii.phy_id_mask  = 0x1f;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 0f9ee134855..f7929e89eb0 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -143,6 +143,8 @@
  *	FIXES:
  * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
  *	- Stratus87247: protect MDI control register manipulations
+ * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
+ *      - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
  */
 
 #include <linux/module.h>
@@ -372,6 +374,7 @@ enum eeprom_op {
 
 enum eeprom_offsets {
 	eeprom_cnfg_mdix  = 0x03,
+	eeprom_phy_iface  = 0x06,
 	eeprom_id         = 0x0A,
 	eeprom_config_asf = 0x0D,
 	eeprom_smbus_addr = 0x90,
@@ -381,6 +384,18 @@ enum eeprom_cnfg_mdix {
 	eeprom_mdix_enabled = 0x0080,
 };
 
+enum eeprom_phy_iface {
+	NoSuchPhy = 0,
+	I82553AB,
+	I82553C,
+	I82503,
+	DP83840,
+	S80C240,
+	S80C24,
+	I82555,
+	DP83840A = 10,
+};
+
 enum eeprom_id {
 	eeprom_id_wol = 0x0020,
 };
@@ -545,6 +560,7 @@ struct nic {
 	u32 msg_enable				____cacheline_aligned;
 	struct net_device *netdev;
 	struct pci_dev *pdev;
+	u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
 
 	struct rx *rxs				____cacheline_aligned;
 	struct rx *rx_to_use;
@@ -899,7 +915,21 @@ err_unlock:
 	return err;
 }
 
-static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+	struct nic *nic = netdev_priv(netdev);
+	return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+	struct nic *nic = netdev_priv(netdev);
+
+	nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
+}
+
+/* the standard mdio_ctrl() function for usual MII-compliant hardware */
+static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
 {
 	u32 data_out = 0;
 	unsigned int i;
@@ -938,30 +968,83 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
 	return (u16)data_out;
 }
 
-static int mdio_read(struct net_device *netdev, int addr, int reg)
-{
-	return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0);
+/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
+static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
+				 u32 addr,
+				 u32 dir,
+				 u32 reg,
+				 u16 data)
+{
+	if ((reg == MII_BMCR) && (dir == mdi_write)) {
+		if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
+			u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
+							MII_ADVERTISE);
+
+			/*
+			 * Workaround Si issue where sometimes the part will not
+			 * autoneg to 100Mbps even when advertised.
+			 */
+			if (advert & ADVERTISE_100FULL)
+				data |= BMCR_SPEED100 | BMCR_FULLDPLX;
+			else if (advert & ADVERTISE_100HALF)
+				data |= BMCR_SPEED100;
+		}
+	}
+	return mdio_ctrl_hw(nic, addr, dir, reg, data);
 }
 
-static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
-{
-	struct nic *nic = netdev_priv(netdev);
-
-	if  ((nic->phy == phy_82552_v) && (reg == MII_BMCR) &&
-	     (data & (BMCR_ANRESTART | BMCR_ANENABLE))) {
-		u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
-
-		/*
-		 * Workaround Si issue where sometimes the part will not
-		 * autoneg to 100Mbps even when advertised.
-		 */
-		if (advert & ADVERTISE_100FULL)
-			data |= BMCR_SPEED100 | BMCR_FULLDPLX;
-		else if (advert & ADVERTISE_100HALF)
-			data |= BMCR_SPEED100;
+/* Fully software-emulated mdio_ctrl() function for cards without
+ * MII-compliant PHYs.
+ * For now, this is mainly geared towards 80c24 support; in case of further
+ * requirements for other types (i82503, ...?) either extend this mechanism
+ * or split it, whichever is cleaner.
+ */
+static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
+				      u32 addr,
+				      u32 dir,
+				      u32 reg,
+				      u16 data)
+{
+	/* might need to allocate a netdev_priv'ed register array eventually
+	 * to be able to record state changes, but for now
+	 * some fully hardcoded register handling ought to be ok I guess. */
+
+	if (dir == mdi_read) {
+		switch (reg) {
+		case MII_BMCR:
+			/* Auto-negotiation, right? */
+			return  BMCR_ANENABLE |
+				BMCR_FULLDPLX;
+		case MII_BMSR:
+			return	BMSR_LSTATUS /* for mii_link_ok() */ |
+				BMSR_ANEGCAPABLE |
+				BMSR_10FULL;
+		case MII_ADVERTISE:
+			/* 80c24 is a "combo card" PHY, right? */
+			return	ADVERTISE_10HALF |
+				ADVERTISE_10FULL;
+		default:
+			DPRINTK(HW, DEBUG,
+		"%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+		dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+			return 0xFFFF;
+		}
+	} else {
+		switch (reg) {
+		default:
+			DPRINTK(HW, DEBUG,
+		"%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+		dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+			return 0xFFFF;
+		}
 	}
-
-	mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data);
+}
+static inline int e100_phy_supports_mii(struct nic *nic)
+{
+	/* for now, just check it by comparing whether we
+	   are using MII software emulation.
+	*/
+	return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
 }
 
 static void e100_get_defaults(struct nic *nic)
@@ -1013,7 +1096,8 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 	config->standard_stat_counter = 0x1;	/* 1=standard, 0=extended */
 	config->rx_discard_short_frames = 0x1;	/* 1=discard, 0=pass */
 	config->tx_underrun_retry = 0x3;	/* # of underrun retries */
-	config->mii_mode = 0x1;			/* 1=MII mode, 0=503 mode */
+	if (e100_phy_supports_mii(nic))
+		config->mii_mode = 1;           /* 1=MII mode, 0=i82503 mode */
 	config->pad10 = 0x6;
 	config->no_source_addr_insertion = 0x1;	/* 1=no, 0=yes */
 	config->preamble_length = 0x2;		/* 0=1, 1=3, 2=7, 3=15 bytes */
@@ -1270,6 +1354,42 @@ static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		offsetof(struct mem, dump_buf));
 }
 
+static int e100_phy_check_without_mii(struct nic *nic)
+{
+	u8 phy_type;
+	int without_mii;
+
+	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+
+	switch (phy_type) {
+	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
+	case I82503: /* Non-MII PHY; UNTESTED! */
+	case S80C24: /* Non-MII PHY; tested and working */
+		/* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
+		 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
+		 * doesn't have a programming interface of any sort.  The
+		 * media is sensed automatically based on how the link partner
+		 * is configured.  This is, in essence, manual configuration.
+		 */
+		DPRINTK(PROBE, INFO,
+			 "found MII-less i82503 or 80c24 or other PHY\n");
+
+		nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
+		nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
+
+		/* these might be needed for certain MII-less cards...
+		 * nic->flags |= ich;
+		 * nic->flags |= ich_10h_workaround; */
+
+		without_mii = 1;
+		break;
+	default:
+		without_mii = 0;
+		break;
+	}
+	return without_mii;
+}
+
 #define NCONFIG_AUTO_SWITCH	0x0080
 #define MII_NSC_CONG		MII_RESV1
 #define NSC_CONG_ENABLE		0x0100
@@ -1290,9 +1410,21 @@ static int e100_phy_init(struct nic *nic)
 		if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
 			break;
 	}
-	DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
-	if (addr == 32)
-		return -EAGAIN;
+	if (addr == 32) {
+		/* uhoh, no PHY detected: check whether we seem to be some
+		 * weird, rare variant which is *known* to not have any MII.
+		 * But do this AFTER MII checking only, since this does
+		 * lookup of EEPROM values which may easily be unreliable. */
+		if (e100_phy_check_without_mii(nic))
+			return 0; /* simply return and hope for the best */
+		else {
+			/* for unknown cases log a fatal error */
+			DPRINTK(HW, ERR,
+				"Failed to locate any known PHY, aborting.\n");
+			return -EAGAIN;
+		}
+	} else
+		DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
 
 	/* Isolate all the PHY ids */
 	for (addr = 0; addr < 32; addr++)
@@ -1320,6 +1452,9 @@ static int e100_phy_init(struct nic *nic)
 	if (nic->phy == phy_82552_v) {
 		u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
 
+		/* assign special tweaked mdio_ctrl() function */
+		nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
+
 		/* Workaround Si not advertising flow-control during autoneg */
 		advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 		mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
@@ -1581,7 +1716,7 @@ static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		/* This is a hard error - log it. */
 		DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
 		netif_stop_queue(netdev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	netdev->trans_start = jiffies;
@@ -2585,6 +2720,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	nic->netdev = netdev;
 	nic->pdev = pdev;
 	nic->msg_enable = (1 << debug) - 1;
+	nic->mdio_ctrl = mdio_ctrl_hw;
 	pci_set_drvdata(pdev, netdev);
 
 	if ((err = pci_enable_device(pdev))) {
@@ -2785,7 +2921,7 @@ static int e100_resume(struct pci_dev *pdev)
 	/* ack any pending wake events, disable PME */
 	pci_enable_wake(pdev, 0, 0);
 
-	/* disbale reverse auto-negotiation */
+	/* disable reverse auto-negotiation */
 	if (nic->phy == phy_82552_v) {
 		u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
 		                           E100_82552_SMARTSPEED);
@@ -2822,12 +2958,13 @@ static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
-	/* Similar to calling e100_down(), but avoids adapter I/O. */
-	e100_close(netdev);
-
-	/* Detach; put netif into a state similar to hotplug unplug. */
-	napi_enable(&nic->napi);
 	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (netif_running(netdev))
+		e100_down(nic);
 	pci_disable_device(pdev);
 
 	/* Request a slot reset. */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index fffb006b7d9..8d36743c814 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -498,6 +498,8 @@ int e1000_up(struct e1000_adapter *adapter)
 
 	e1000_irq_enable(adapter);
 
+	netif_wake_queue(adapter->netdev);
+
 	/* fire a link change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
 	return 0;
@@ -1234,15 +1236,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	    !e1000_check_mng_mode(hw))
 		e1000_get_hw_control(adapter);
 
-	/* tell the stack to leave us alone until e1000_open() is called */
-	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
 	DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
 
 	cards_found++;
@@ -1441,6 +1442,8 @@ static int e1000_open(struct net_device *netdev)
 	if (test_bit(__E1000_TESTING, &adapter->flags))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = e1000_setup_all_tx_resources(adapter);
 	if (err)
@@ -2327,7 +2330,8 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	struct dev_addr_list *uc_ptr;
+	struct netdev_hw_addr *ha;
+	bool use_uc = false;
 	struct dev_addr_list *mc_ptr;
 	u32 rctl;
 	u32 hash_value;
@@ -2366,12 +2370,11 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			rctl |= E1000_RCTL_VFE;
 	}
 
-	uc_ptr = NULL;
 	if (netdev->uc_count > rar_entries - 1) {
 		rctl |= E1000_RCTL_UPE;
 	} else if (!(netdev->flags & IFF_PROMISC)) {
 		rctl &= ~E1000_RCTL_UPE;
-		uc_ptr = netdev->uc_list;
+		use_uc = true;
 	}
 
 	ew32(RCTL, rctl);
@@ -2389,13 +2392,20 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 * if there are not 14 addresses, go ahead and clear the filters
 	 * -- with 82571 controllers only 0-13 entries are filled here
 	 */
+	i = 1;
+	if (use_uc)
+		list_for_each_entry(ha, &netdev->uc_list, list) {
+			if (i == rar_entries)
+				break;
+			e1000_rar_set(hw, ha->addr, i++);
+		}
+
+	WARN_ON(i == rar_entries);
+
 	mc_ptr = netdev->mc_list;
 
-	for (i = 1; i < rar_entries; i++) {
-		if (uc_ptr) {
-			e1000_rar_set(hw, uc_ptr->da_addr, i);
-			uc_ptr = uc_ptr->next;
-		} else if (mc_ptr) {
+	for (; i < rar_entries; i++) {
+		if (mc_ptr) {
 			e1000_rar_set(hw, mc_ptr->da_addr, i);
 			mc_ptr = mc_ptr->next;
 		} else {
@@ -2405,7 +2415,6 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			E1000_WRITE_FLUSH();
 		}
 	}
-	WARN_ON(uc_ptr != NULL);
 
 	/* load any remaining addresses into the hash table */
 
@@ -2590,7 +2599,6 @@ static void e1000_watchdog(unsigned long data)
 			ew32(TCTL, tctl);
 
 			netif_carrier_on(netdev);
-			netif_wake_queue(netdev);
 			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
 			adapter->smartspeed = 0;
 		} else {
@@ -2607,7 +2615,6 @@ static void e1000_watchdog(unsigned long data)
 			printk(KERN_INFO "e1000: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
 			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
 
 			/* 80003ES2LAN workaround--
@@ -2645,6 +2652,8 @@ static void e1000_watchdog(unsigned long data)
 			 * (Do the reset outside of interrupt context). */
 			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -2989,7 +2998,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			size -= 4;
 
 		buffer_info->length = size;
-		buffer_info->dma = map[0] + offset;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
 
@@ -3030,7 +3039,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 				size -= 4;
 
 			buffer_info->length = size;
-			buffer_info->dma = map[f + 1] + offset;
+			buffer_info->dma = map[f] + offset;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
 
@@ -3362,7 +3371,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (count) {
 		e1000_tx_queue(adapter, tx_ring, tx_flags, count);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
 
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 6c01a2072c8..b53b40ba88a 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -71,6 +71,7 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
 static s32 e1000_led_on_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -212,6 +213,9 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_mac_operations *func = &mac->ops;
+	u32 swsm = 0;
+	u32 swsm2 = 0;
+	bool force_clear_smbi = false;
 
 	/* Set media type */
 	switch (adapter->pdev->device) {
@@ -276,6 +280,50 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 		break;
 	}
 
+	/*
+	 * Ensure that the inter-port SWSM.SMBI lock bit is clear before
+	 * first NVM or PHY acess. This should be done for single-port
+	 * devices, and for one port only on dual-port devices so that
+	 * for those devices we can still use the SMBI lock to synchronize
+	 * inter-port accesses to the PHY & NVM.
+	 */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		swsm2 = er32(SWSM2);
+
+		if (!(swsm2 & E1000_SWSM2_LOCK)) {
+			/* Only do this for the first interface on this card */
+			ew32(SWSM2,
+			    swsm2 | E1000_SWSM2_LOCK);
+			force_clear_smbi = true;
+		} else
+			force_clear_smbi = false;
+		break;
+	default:
+		force_clear_smbi = true;
+		break;
+	}
+
+	if (force_clear_smbi) {
+		/* Make sure SWSM.SMBI is clear */
+		swsm = er32(SWSM);
+		if (swsm & E1000_SWSM_SMBI) {
+			/* This bit should not be set on a first interface, and
+			 * indicates that the bootagent or EFI code has
+			 * improperly left this bit enabled
+			 */
+			hw_dbg(hw, "Please update your 82571 Bootagent\n");
+		}
+		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
+	}
+
+	/*
+	 * Initialze device specific counter of SMBI acquisition
+	 * timeouts.
+	 */
+	 hw->dev_spec.e82571.smb_counter = 0;
+
 	return 0;
 }
 
@@ -341,8 +389,10 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 			if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
 				       &eeprom_data) < 0)
 				break;
-			if (eeprom_data & NVM_WORD1A_ASPM_MASK)
-				adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+			if (!(eeprom_data & NVM_WORD1A_ASPM_MASK)) {
+				adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+				adapter->max_hw_frame_size = DEFAULT_JUMBO;
+			}
 		}
 		break;
 	default:
@@ -411,11 +461,37 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 {
 	u32 swsm;
-	s32 timeout = hw->nvm.word_size + 1;
+	s32 sw_timeout = hw->nvm.word_size + 1;
+	s32 fw_timeout = hw->nvm.word_size + 1;
 	s32 i = 0;
 
+	/*
+	 * If we have timedout 3 times on trying to acquire
+	 * the inter-port SMBI semaphore, there is old code
+	 * operating on the other port, and it is not
+	 * releasing SMBI. Modify the number of times that
+	 * we try for the semaphore to interwork with this
+	 * older code.
+	 */
+	if (hw->dev_spec.e82571.smb_counter > 2)
+		sw_timeout = 1;
+
+	/* Get the SW semaphore */
+	while (i < sw_timeout) {
+		swsm = er32(SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		udelay(50);
+		i++;
+	}
+
+	if (i == sw_timeout) {
+		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		hw->dev_spec.e82571.smb_counter++;
+	}
 	/* Get the FW semaphore. */
-	for (i = 0; i < timeout; i++) {
+	for (i = 0; i < fw_timeout; i++) {
 		swsm = er32(SWSM);
 		ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
 
@@ -426,9 +502,9 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 		udelay(50);
 	}
 
-	if (i == timeout) {
+	if (i == fw_timeout) {
 		/* Release semaphores */
-		e1000e_put_hw_semaphore(hw);
+		e1000_put_hw_semaphore_82571(hw);
 		hw_dbg(hw, "Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
@@ -447,9 +523,7 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
 	u32 swsm;
 
 	swsm = er32(SWSM);
-
-	swsm &= ~E1000_SWSM_SWESMBI;
-
+	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
 	ew32(SWSM, swsm);
 }
 
@@ -1585,6 +1659,7 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
 static struct e1000_mac_operations e82571_mac_ops = {
 	/* .check_mng_mode: mac type dependent */
 	/* .check_for_link: media type dependent */
+	.id_led_init		= e1000e_id_led_init,
 	.cleanup_led		= e1000e_cleanup_led_generic,
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_82571,
 	.get_bus_info		= e1000e_get_bus_info_pcie,
@@ -1596,6 +1671,7 @@ static struct e1000_mac_operations e82571_mac_ops = {
 	.init_hw		= e1000_init_hw_82571,
 	.setup_link		= e1000_setup_link_82571,
 	/* .setup_physical_interface: media type dependent */
+	.setup_led		= e1000e_setup_led_generic,
 };
 
 static struct e1000_phy_operations e82_phy_ops_igp = {
@@ -1672,6 +1748,7 @@ struct e1000_info e1000_82571_info = {
 				  | FLAG_TARC_SPEED_MODE_BIT /* errata */
 				  | FLAG_APME_CHECK_PORT_B,
 	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_igp,
@@ -1688,6 +1765,7 @@ struct e1000_info e1000_82572_info = {
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_TARC_SPEED_MODE_BIT, /* errata */
 	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_igp,
@@ -1706,6 +1784,7 @@ struct e1000_info e1000_82573_info = {
 				  | FLAG_HAS_ERT
 				  | FLAG_HAS_SWSM_ON_LOAD,
 	.pba			= 20,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_m88,
@@ -1724,6 +1803,7 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.pba			= 20,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_bm,
@@ -1740,6 +1820,7 @@ struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.pba			= 20,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_bm,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 243aa499fe9..8890c97e112 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -56,6 +56,7 @@
 /* Wake Up Control */
 #define E1000_WUC_APME       0x00000001 /* APM Enable */
 #define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
+#define E1000_WUC_PHY_WAKE   0x00000100 /* if PHY supports wakeup */
 
 /* Wake Up Filter Control */
 #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
@@ -65,6 +66,13 @@
 #define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
 #define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
 
+/* Wake Up Status */
+#define E1000_WUS_LNKC         E1000_WUFC_LNKC
+#define E1000_WUS_MAG          E1000_WUFC_MAG
+#define E1000_WUS_EX           E1000_WUFC_EX
+#define E1000_WUS_MC           E1000_WUFC_MC
+#define E1000_WUS_BC           E1000_WUFC_BC
+
 /* Extended Device Control */
 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
@@ -77,6 +85,7 @@
 #define E1000_CTRL_EXT_IAME           0x08000000 /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers after IMS clear */
 #define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN        0x00100000
 
 /* Receive Descriptor bit definitions */
 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
@@ -140,6 +149,7 @@
 #define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */
 #define E1000_RCTL_RDMTS_HALF     0x00000000    /* Rx desc min threshold size */
 #define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
+#define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */
 #define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
 #define E1000_RCTL_SZ_2048        0x00000000    /* Rx buffer size 2048 */
@@ -153,6 +163,7 @@
 #define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
 #define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
 #define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */
+#define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */
 #define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */
 #define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
 
@@ -255,11 +266,16 @@
 #define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
 
 /* LED Control */
+#define E1000_PHY_LED0_MODE_MASK          0x00000007
+#define E1000_PHY_LED0_IVRT               0x00000008
+#define E1000_PHY_LED0_MASK               0x0000001F
+
 #define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
 #define E1000_LEDCTL_LED0_MODE_SHIFT      0
 #define E1000_LEDCTL_LED0_IVRT            0x00000040
 #define E1000_LEDCTL_LED0_BLINK           0x00000080
 
+#define E1000_LEDCTL_MODE_LINK_UP       0x2
 #define E1000_LEDCTL_MODE_LED_ON        0xE
 #define E1000_LEDCTL_MODE_LED_OFF       0xF
 
@@ -360,6 +376,8 @@
 #define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
 #define E1000_SWSM_DRV_LOAD     0x00000008 /* Driver Loaded Bit */
 
+#define E1000_SWSM2_LOCK        0x00000002 /* Secondary driver semaphore bit */
+
 /* Interrupt Cause Read */
 #define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */
 #define E1000_ICR_LSC           0x00000004 /* Link Status Change */
@@ -469,6 +487,8 @@
 #define AUTO_READ_DONE_TIMEOUT      10
 
 /* Flow Control */
+#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
 #define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
 
 /* Transmit Configuration Word */
@@ -674,6 +694,8 @@
 #define IFE_C_E_PHY_ID       0x02A80310
 #define BME1000_E_PHY_ID     0x01410CB0
 #define BME1000_E_PHY_ID_R2  0x01410CB1
+#define I82577_E_PHY_ID      0x01540050
+#define I82578_E_PHY_ID      0x004DD040
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
@@ -727,6 +749,9 @@
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
 
+#define I82578_EPSCR_DOWNSHIFT_ENABLE          0x0020
+#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK    0x001C
+
 /* BME1000 PHY Specific Control Register */
 #define BME1000_PSCR_ENABLE_DOWNSHIFT   0x0800 /* 1 = enable downshift */
 
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f37360aa12a..981936c1fb4 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,7 +62,7 @@ struct e1000_info;
 	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define E1000E_INT_MODE_LEGACY		0
 #define E1000E_INT_MODE_MSI		1
 #define E1000E_INT_MODE_MSIX		2
@@ -96,6 +96,51 @@ struct e1000_info;
 /* Number of packet split data buffers (not including the header buffer) */
 #define PS_PAGE_BUFFERS			(MAX_PS_BUFFERS - 1)
 
+#define DEFAULT_JUMBO			9234
+
+/* BM/HV Specific Registers */
+#define BM_PORT_CTRL_PAGE                 769
+
+#define PHY_UPPER_SHIFT                   21
+#define BM_PHY_REG(page, reg) \
+	(((reg) & MAX_PHY_REG_ADDRESS) |\
+	 (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
+	 (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
+
+/* PHY Wakeup Registers and defines */
+#define BM_RCTL         PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC          PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC         PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS          PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i)    (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i)    (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i)    (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i)      (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE           0x0001          /* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE           0x0002          /* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT      3               /* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK       (3 << 3)        /* Multicast Offset Mask */
+#define BM_RCTL_BAM           0x0020          /* Broadcast Accept Mode */
+#define BM_RCTL_PMCF          0x0040          /* Pass MAC Control Frames */
+#define BM_RCTL_RFCE          0x0080          /* Rx Flow Control Enable */
+
+#define HV_SCC_UPPER		PHY_REG(778, 16) /* Single Collision Count */
+#define HV_SCC_LOWER		PHY_REG(778, 17)
+#define HV_ECOL_UPPER		PHY_REG(778, 18) /* Excessive Collision Count */
+#define HV_ECOL_LOWER		PHY_REG(778, 19)
+#define HV_MCC_UPPER		PHY_REG(778, 20) /* Multiple Collision Count */
+#define HV_MCC_LOWER		PHY_REG(778, 21)
+#define HV_LATECOL_UPPER	PHY_REG(778, 23) /* Late Collision Count */
+#define HV_LATECOL_LOWER	PHY_REG(778, 24)
+#define HV_COLC_UPPER		PHY_REG(778, 25) /* Collision Count */
+#define HV_COLC_LOWER		PHY_REG(778, 26)
+#define HV_DC_UPPER		PHY_REG(778, 27) /* Defer Count */
+#define HV_DC_LOWER		PHY_REG(778, 28)
+#define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
+#define HV_TNCRS_LOWER		PHY_REG(778, 30)
+
 enum e1000_boards {
 	board_82571,
 	board_82572,
@@ -106,6 +151,7 @@ enum e1000_boards {
 	board_ich8lan,
 	board_ich9lan,
 	board_ich10lan,
+	board_pchlan,
 };
 
 struct e1000_queue_stats {
@@ -293,6 +339,7 @@ struct e1000_adapter {
 	u32 eeprom_wol;
 	u32 wol;
 	u32 pba;
+	u32 max_hw_frame_size;
 
 	bool fc_autoneg;
 
@@ -302,6 +349,7 @@ struct e1000_adapter {
 	unsigned int flags2;
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
+	struct work_struct led_blink_task;
 };
 
 struct e1000_info {
@@ -309,6 +357,7 @@ struct e1000_info {
 	unsigned int		flags;
 	unsigned int            flags2;
 	u32			pba;
+	u32			max_hw_frame_size;
 	s32			(*get_variants)(struct e1000_adapter *);
 	struct e1000_mac_operations *mac_ops;
 	struct e1000_phy_operations *phy_ops;
@@ -351,6 +400,7 @@ struct e1000_info {
 
 /* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
+#define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -404,6 +454,7 @@ extern struct e1000_info e1000_82583_info;
 extern struct e1000_info e1000_ich8_info;
 extern struct e1000_info e1000_ich9_info;
 extern struct e1000_info e1000_ich10_info;
+extern struct e1000_info e1000_pch_info;
 extern struct e1000_info e1000_es2_info;
 
 extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
@@ -425,6 +476,7 @@ extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
+extern s32 e1000e_setup_led_generic(struct e1000_hw *hw);
 extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
 extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
 extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
@@ -493,6 +545,15 @@ extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_check_downshift(struct e1000_hw *hw);
+extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
+extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
+extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
+extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
+extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
+extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
 
 static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 8964838c686..ae5d7368935 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1366,6 +1366,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 }
 
 static struct e1000_mac_operations es2_mac_ops = {
+	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000e_check_mng_mode_generic,
 	/* check_for_link dependent on media type */
 	.cleanup_led		= e1000e_cleanup_led_generic,
@@ -1379,6 +1380,7 @@ static struct e1000_mac_operations es2_mac_ops = {
 	.init_hw		= e1000_init_hw_80003es2lan,
 	.setup_link		= e1000e_setup_link,
 	/* setup_physical_interface dependent on media type */
+	.setup_led		= e1000e_setup_led_generic,
 };
 
 static struct e1000_phy_operations es2_phy_ops = {
@@ -1422,6 +1424,7 @@ struct e1000_info e1000_es2_info = {
 				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
 				  | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
 	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_80003es2lan,
 	.mac_ops		= &es2_mac_ops,
 	.phy_ops		= &es2_phy_ops,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 4d25ede8836..1bf4d2a5d34 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -167,6 +167,15 @@ static int e1000_get_settings(struct net_device *netdev,
 
 	ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
 			 hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+	/* MDI-X => 2; MDI =>1; Invalid =>0 */
+	if ((hw->phy.media_type == e1000_media_type_copper) &&
+	    !hw->mac.get_link_status)
+		ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+		                                      ETH_TP_MDI;
+	else
+		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
 	return 0;
 }
 
@@ -776,6 +785,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	u32 after;
 	u32 i;
 	u32 toggle;
+	u32 mask;
 
 	/*
 	 * The status register is Read Only, so a write should fail.
@@ -788,17 +798,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	case e1000_80003es2lan:
 		toggle = 0x7FFFF3FF;
 		break;
-	case e1000_82573:
-	case e1000_82574:
-	case e1000_82583:
-	case e1000_ich8lan:
-	case e1000_ich9lan:
-	case e1000_ich10lan:
+        default:
 		toggle = 0x7FFFF033;
 		break;
-	default:
-		toggle = 0xFFFFF833;
-		break;
 	}
 
 	before = er32(STATUS);
@@ -844,11 +846,18 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 		REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
 	REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 	REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
+	mask = 0x8003FFFF;
+	switch (mac->type) {
+	case e1000_ich10lan:
+	case e1000_pchlan:
+		mask |= (1 << 18);
+		break;
+	default:
+		break;
+	}
 	for (i = 0; i < mac->rar_entry_count; i++)
 		REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
-				       ((mac->type == e1000_ich10lan) ?
-					   0x8007FFFF : 0x8003FFFF),
-				       0xFFFFFFFF);
+		                       mask, 0xFFFFFFFF);
 
 	for (i = 0; i < mac->mta_reg_count; i++)
 		REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -1786,15 +1795,22 @@ static int e1000_set_wol(struct net_device *netdev,
 /* bit defines for adapter->led_status */
 #define E1000_LED_ON		0
 
-static void e1000_led_blink_callback(unsigned long data)
+static void e1000e_led_blink_task(struct work_struct *work)
 {
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_adapter *adapter = container_of(work,
+	                                struct e1000_adapter, led_blink_task);
 
 	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
 		adapter->hw.mac.ops.led_off(&adapter->hw);
 	else
 		adapter->hw.mac.ops.led_on(&adapter->hw);
+}
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
 
+	schedule_work(&adapter->led_blink_task);
 	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
 }
 
@@ -1807,7 +1823,9 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 		data = INT_MAX;
 
 	if ((hw->phy.type == e1000_phy_ife) ||
+	    (hw->mac.type == e1000_pchlan) ||
 	    (hw->mac.type == e1000_82574)) {
+		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function =
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index d8b82296f41..163c1c0cfee 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -193,7 +193,11 @@ enum e1e_registers {
 	E1000_RXCSUM   = 0x05000, /* Rx Checksum Control - RW */
 	E1000_RFCTL    = 0x05008, /* Receive Filter Control */
 	E1000_MTA      = 0x05200, /* Multicast Table Array - RW Array */
-	E1000_RA       = 0x05400, /* Receive Address - RW Array */
+	E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */
+#define E1000_RAL(_n)   (E1000_RAL_BASE + ((_n) * 8))
+#define E1000_RA        (E1000_RAL(0))
+	E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
+#define E1000_RAH(_n)   (E1000_RAH_BASE + ((_n) * 8))
 	E1000_VFTA     = 0x05600, /* VLAN Filter Table Array - RW Array */
 	E1000_WUC      = 0x05800, /* Wakeup Control - RW */
 	E1000_WUFC     = 0x05808, /* Wakeup Filter Control - RW */
@@ -210,6 +214,7 @@ enum e1e_registers {
 	E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
+	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -253,7 +258,7 @@ enum e1e_registers {
 #define IGP01E1000_PLHR_SS_DOWNGRADE	0x8000
 
 #define IGP01E1000_PSSR_POLARITY_REVERSED	0x0002
-#define IGP01E1000_PSSR_MDIX			0x0008
+#define IGP01E1000_PSSR_MDIX			0x0800
 #define IGP01E1000_PSSR_SPEED_MASK		0xC000
 #define IGP01E1000_PSSR_SPEED_1000MBPS		0xC000
 
@@ -368,6 +373,10 @@ enum e1e_registers {
 #define E1000_DEV_ID_ICH10_R_BM_V		0x10CE
 #define E1000_DEV_ID_ICH10_D_BM_LM		0x10DE
 #define E1000_DEV_ID_ICH10_D_BM_LF		0x10DF
+#define E1000_DEV_ID_PCH_M_HV_LM		0x10EA
+#define E1000_DEV_ID_PCH_M_HV_LC		0x10EB
+#define E1000_DEV_ID_PCH_D_HV_DM		0x10EF
+#define E1000_DEV_ID_PCH_D_HV_DC		0x10F0
 
 #define E1000_REVISION_4 4
 
@@ -383,6 +392,7 @@ enum e1000_mac_type {
 	e1000_ich8lan,
 	e1000_ich9lan,
 	e1000_ich10lan,
+	e1000_pchlan,
 };
 
 enum e1000_media_type {
@@ -417,6 +427,8 @@ enum e1000_phy_type {
 	e1000_phy_igp_3,
 	e1000_phy_ife,
 	e1000_phy_bm,
+	e1000_phy_82578,
+	e1000_phy_82577,
 };
 
 enum e1000_bus_width {
@@ -720,6 +732,7 @@ struct e1000_host_mng_command_info {
 
 /* Function pointers and static data for the MAC. */
 struct e1000_mac_operations {
+	s32  (*id_led_init)(struct e1000_hw *);
 	bool (*check_mng_mode)(struct e1000_hw *);
 	s32  (*check_for_link)(struct e1000_hw *);
 	s32  (*cleanup_led)(struct e1000_hw *);
@@ -733,11 +746,13 @@ struct e1000_mac_operations {
 	s32  (*init_hw)(struct e1000_hw *);
 	s32  (*setup_link)(struct e1000_hw *);
 	s32  (*setup_physical_interface)(struct e1000_hw *);
+	s32  (*setup_led)(struct e1000_hw *);
 };
 
 /* Function pointers for the PHY. */
 struct e1000_phy_operations {
 	s32  (*acquire_phy)(struct e1000_hw *);
+	s32  (*check_polarity)(struct e1000_hw *);
 	s32  (*check_reset_block)(struct e1000_hw *);
 	s32  (*commit_phy)(struct e1000_hw *);
 	s32  (*force_speed_duplex)(struct e1000_hw *);
@@ -869,6 +884,7 @@ struct e1000_fc_info {
 struct e1000_dev_spec_82571 {
 	bool laa_is_present;
 	bool alt_mac_addr_is_present;
+	u32 smb_counter;
 };
 
 struct e1000_shadow_ram {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 6d1aab6316b..9e23f50fb9c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -48,6 +48,10 @@
  * 82567LF-3 Gigabit Network Connection
  * 82567LM-3 Gigabit Network Connection
  * 82567LM-4 Gigabit Network Connection
+ * 82577LM Gigabit Network Connection
+ * 82577LC Gigabit Network Connection
+ * 82578DM Gigabit Network Connection
+ * 82578DC Gigabit Network Connection
  */
 
 #include <linux/netdevice.h>
@@ -116,6 +120,8 @@
 #define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
 #define IGP3_VR_CTRL_MODE_SHUTDOWN	0x0200
 
+#define HV_LED_CONFIG		PHY_REG(768, 30) /* LED Configuration */
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -186,6 +192,14 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
 static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
 static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -213,6 +227,41 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
 #define ew32flash(reg,val)	__ew32flash(hw, (reg), (val))
 
 /**
+ *  e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+
+	phy->addr                     = 1;
+	phy->reset_delay_us           = 100;
+
+	phy->ops.check_polarity       = e1000_check_polarity_ife_ich8lan;
+	phy->ops.read_phy_reg         = e1000_read_phy_reg_hv;
+	phy->ops.write_phy_reg        = e1000_write_phy_reg_hv;
+	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+	phy->id = e1000_phy_unknown;
+	e1000e_get_phy_id(hw);
+	phy->type = e1000e_get_phy_type_from_id(phy->id);
+
+	if (phy->type == e1000_phy_82577) {
+		phy->ops.check_polarity = e1000_check_polarity_82577;
+		phy->ops.force_speed_duplex =
+			e1000_phy_force_speed_duplex_82577;
+		phy->ops.get_cable_length   = e1000_get_cable_length_82577;
+		phy->ops.get_phy_info = e1000_get_phy_info_82577;
+		phy->ops.commit_phy = e1000e_phy_sw_reset;
+	}
+
+	return ret_val;
+}
+
+/**
  *  e1000_init_phy_params_ich8lan - Initialize PHY function pointers
  *  @hw: pointer to the HW structure
  *
@@ -273,6 +322,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 		break;
 	}
 
+	phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
+
 	return 0;
 }
 
@@ -358,6 +409,36 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	/* Set if manageability features are enabled. */
 	mac->arc_subsystem_valid = 1;
 
+	/* LED operations */
+	switch (mac->type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		/* ID LED init */
+		mac->ops.id_led_init = e1000e_id_led_init;
+		/* setup LED */
+		mac->ops.setup_led = e1000e_setup_led_generic;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_ich8lan;
+		mac->ops.led_off = e1000_led_off_ich8lan;
+		break;
+	case e1000_pchlan:
+		/* ID LED init */
+		mac->ops.id_led_init = e1000_id_led_init_pchlan;
+		/* setup LED */
+		mac->ops.setup_led = e1000_setup_led_pchlan;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_pchlan;
+		mac->ops.led_off = e1000_led_off_pchlan;
+		break;
+	default:
+		break;
+	}
+
 	/* Enable PCS Lock-loss workaround for ICH8 */
 	if (mac->type == e1000_ich8lan)
 		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
@@ -378,10 +459,18 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	if (rc)
 		return rc;
 
-	rc = e1000_init_phy_params_ich8lan(hw);
+	if (hw->mac.type == e1000_pchlan)
+		rc = e1000_init_phy_params_pchlan(hw);
+	else
+		rc = e1000_init_phy_params_ich8lan(hw);
 	if (rc)
 		return rc;
 
+	if (adapter->hw.phy.type == e1000_phy_ife) {
+		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+		adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+	}
+
 	if ((adapter->hw.mac.type == e1000_ich8lan) &&
 	    (adapter->hw.phy.type == e1000_phy_igp_3))
 		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
@@ -410,12 +499,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
-		extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
-		ew32(EXTCNF_CTRL, extcnf_ctrl);
 
-		extcnf_ctrl = er32(EXTCNF_CTRL);
-		if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
-			break;
+		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) {
+			extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+			ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+			extcnf_ctrl = er32(EXTCNF_CTRL);
+			if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+				break;
+		}
 		mdelay(1);
 		timeout--;
 	}
@@ -555,6 +647,53 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ *  done after every PHY reset.
+ **/
+static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (hw->mac.type != e1000_pchlan)
+		return ret_val;
+
+	if (((hw->phy.type == e1000_phy_82577) &&
+	     ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
+	    ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
+		/* Disable generation of early preamble */
+		ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
+		if (ret_val)
+			return ret_val;
+
+		/* Preamble tuning for SSC */
+		ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->phy.type == e1000_phy_82578) {
+		/*
+		 * Return registers to default by doing a soft reset then
+		 * writing 0x3140 to the control register.
+		 */
+		if (hw->phy.revision < 2) {
+			e1000e_phy_sw_reset(hw);
+			ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140);
+		}
+	}
+
+	/* Select page 0 */
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		return ret_val;
+	hw->phy.addr = 1;
+	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	hw->phy.ops.release_phy(hw);
+
+	return ret_val;
+}
+
+/**
  *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -575,6 +714,12 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/*
 	 * Initialize the PHY from the NVM on ICH platforms.  This
 	 * is needed due to an issue where the NVM configuration is
@@ -701,7 +846,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
 	phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE));
 
 	if (phy->polarity_correction) {
-		ret_val = e1000_check_polarity_ife_ich8lan(hw);
+		ret_val = phy->ops.check_polarity(hw);
 		if (ret_val)
 			return ret_val;
 	} else {
@@ -741,6 +886,8 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
 		break;
 	case e1000_phy_igp_3:
 	case e1000_phy_bm:
+	case e1000_phy_82578:
+	case e1000_phy_82577:
 		return e1000e_get_phy_info_igp(hw);
 		break;
 	default:
@@ -1852,6 +1999,79 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
 }
 
 /**
+ *  e1000_id_led_init_pchlan - store LED configurations
+ *  @hw: pointer to the HW structure
+ *
+ *  PCH does not control LEDs via the LEDCTL register, rather it uses
+ *  the PHY LED configuration register.
+ *
+ *  PCH also does not have an "always on" or "always off" mode which
+ *  complicates the ID feature.  Instead of using the "on" mode to indicate
+ *  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
+ *  use "link_up" mode.  The LEDs will still ID on request if there is no
+ *  link based on logic in e1000_led_[on|off]_pchlan().
+ **/
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
+	u16 data, i, temp, shift;
+
+	/* Get default ID LED modes */
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		goto out;
+
+	mac->ledctl_default = er32(LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
+		shift = (i * 5);
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_on << shift);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_on << shift);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_get_bus_info_ich8lan - Get/Set the bus type and width
  *  @hw: pointer to the HW structure
  *
@@ -1960,6 +2180,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	kab |= E1000_KABGTXD_BGSQLBIAS;
 	ew32(KABGTXD, kab);
 
+	if (hw->mac.type == e1000_pchlan)
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
 	return ret_val;
 }
 
@@ -1985,7 +2208,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	e1000_initialize_hw_bits_ich8lan(hw);
 
 	/* Initialize identification LED */
-	ret_val = e1000e_id_led_init(hw);
+	ret_val = mac->ops.id_led_init(hw);
 	if (ret_val) {
 		hw_dbg(hw, "Error initializing identification LED\n");
 		return ret_val;
@@ -2031,6 +2254,16 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL_EXT, ctrl_ext);
 
 	/*
+	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		e1e_rphy(hw, BM_WUC, &i);
+		e1000e_phy_hw_reset_generic(hw);
+	}
+
+	/*
 	 * Clear all of the statistics registers (clear on read).  It is
 	 * important that we do this after we have tried to establish link
 	 * because the symbol error count will increment wildly if there
@@ -2054,6 +2287,9 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 	/* Extended Device Control */
 	reg = er32(CTRL_EXT);
 	reg |= (1 << 22);
+	/* Enable PHY low-power state when MAC is at D3 w/o WoL */
+	if (hw->mac.type >= e1000_pchlan)
+		reg |= E1000_CTRL_EXT_PHYPDEN;
 	ew32(CTRL_EXT, reg);
 
 	/* Transmit Descriptor Control 0 */
@@ -2112,8 +2348,13 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 	 * the default flow control setting, so we explicitly
 	 * set it to full.
 	 */
-	if (hw->fc.requested_mode == e1000_fc_default)
-		hw->fc.requested_mode = e1000_fc_full;
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		/* Workaround h/w hang when Tx flow control enabled */
+		if (hw->mac.type == e1000_pchlan)
+			hw->fc.requested_mode = e1000_fc_rx_pause;
+		else
+			hw->fc.requested_mode = e1000_fc_full;
+	}
 
 	/*
 	 * Save off the requested flow control mode for use later.  Depending
@@ -2130,6 +2371,14 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 		return ret_val;
 
 	ew32(FCTTV, hw->fc.pause_time);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		ret_val = hw->phy.ops.write_phy_reg(hw,
+		                             PHY_REG(BM_PORT_CTRL_PAGE, 27),
+		                             hw->fc.pause_time);
+		if (ret_val)
+			return ret_val;
+	}
 
 	return e1000e_set_fc_watermarks(hw);
 }
@@ -2169,18 +2418,26 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	if (hw->phy.type == e1000_phy_igp_3) {
+	switch (hw->phy.type) {
+	case e1000_phy_igp_3:
 		ret_val = e1000e_copper_link_setup_igp(hw);
 		if (ret_val)
 			return ret_val;
-	} else if (hw->phy.type == e1000_phy_bm) {
+		break;
+	case e1000_phy_bm:
+	case e1000_phy_82578:
 		ret_val = e1000e_copper_link_setup_m88(hw);
 		if (ret_val)
 			return ret_val;
-	}
-
-	if (hw->phy.type == e1000_phy_ife) {
-		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
+		break;
+	case e1000_phy_82577:
+		ret_val = e1000_copper_link_setup_82577(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_ife:
+		ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		                               &reg_data);
 		if (ret_val)
 			return ret_val;
 
@@ -2198,9 +2455,13 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			reg_data |= IFE_PMC_AUTO_MDIX;
 			break;
 		}
-		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+		ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		                                reg_data);
 		if (ret_val)
 			return ret_val;
+		break;
+	default:
+		break;
 	}
 	return e1000e_setup_copper_link(hw);
 }
@@ -2417,18 +2678,26 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
  *  'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
  *  to a lower speed.
  *
- *  Should only be called for ICH9 and ICH10 devices.
+ *  Should only be called for applicable parts.
  **/
 void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 {
 	u32 phy_ctrl;
 
-	if ((hw->mac.type == e1000_ich10lan) ||
-	    (hw->mac.type == e1000_ich9lan)) {
+	switch (hw->mac.type) {
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+	case e1000_pchlan:
 		phy_ctrl = er32(PHY_CTRL);
 		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
 		            E1000_PHY_CTRL_GBE_DISABLE;
 		ew32(PHY_CTRL, phy_ctrl);
+
+		/* Workaround SWFLAG unexpectedly set during S0->Sx */
+		if (hw->mac.type == e1000_pchlan)
+			udelay(500);
+	default:
+		break;
 	}
 
 	return;
@@ -2482,13 +2751,99 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_setup_led_pchlan - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use.
+ **/
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
+{
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+					(u16)hw->mac.ledctl_mode1);
+}
+
+/**
+ *  e1000_cleanup_led_pchlan - Restore the default LED operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the LED back to the default configuration.
+ **/
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
+{
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+					(u16)hw->mac.ledctl_default);
+}
+
+/**
+ *  e1000_led_on_pchlan - Turn LEDs on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn on the LEDs.
+ **/
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode2;
+	u32 i, led;
+
+	/*
+	 * If no link, then turn LED on by setting the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode2.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+}
+
+/**
+ *  e1000_led_off_pchlan - Turn LEDs off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn off the LEDs.
+ **/
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode1;
+	u32 i, led;
+
+	/*
+	 * If no link, then turn LED off by clearing the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode1.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+}
+
+/**
  *  e1000_get_cfg_done_ich8lan - Read config done bit
  *  @hw: pointer to the HW structure
  *
  *  Read the management control register for the config done bit for
  *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
  *  to read the config done bit, so an error is *ONLY* logged and returns
- *  E1000_SUCCESS.  If we were to return with error, EEPROM-less silicon
+ *  0.  If we were to return with error, EEPROM-less silicon
  *  would not be able to be reset or change link.
  **/
 static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
@@ -2498,7 +2853,8 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 	e1000e_get_cfg_done(hw);
 
 	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
-	if (hw->mac.type != e1000_ich10lan) {
+	if ((hw->mac.type != e1000_ich10lan) &&
+	    (hw->mac.type != e1000_pchlan)) {
 		if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
 		    (hw->phy.type == e1000_phy_igp_3)) {
 			e1000e_phy_init_script_igp3(hw);
@@ -2524,6 +2880,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 {
 	u32 temp;
+	u16 phy_data;
 
 	e1000e_clear_hw_cntrs_base(hw);
 
@@ -2541,22 +2898,42 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 	temp = er32(IAC);
 	temp = er32(ICRXOC);
 
+	/* Clear PHY statistics registers */
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data);
+	}
 }
 
 static struct e1000_mac_operations ich8_mac_ops = {
+	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
 	.check_for_link		= e1000e_check_for_copper_link,
-	.cleanup_led		= e1000_cleanup_led_ich8lan,
+	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
 	.get_bus_info		= e1000_get_bus_info_ich8lan,
 	.get_link_up_info	= e1000_get_link_up_info_ich8lan,
-	.led_on			= e1000_led_on_ich8lan,
-	.led_off		= e1000_led_off_ich8lan,
+	/* led_on dependent on mac type */
+	/* led_off dependent on mac type */
 	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
 	.reset_hw		= e1000_reset_hw_ich8lan,
 	.init_hw		= e1000_init_hw_ich8lan,
 	.setup_link		= e1000_setup_link_ich8lan,
 	.setup_physical_interface= e1000_setup_copper_link_ich8lan,
+	/* id_led_init dependent on mac type */
 };
 
 static struct e1000_phy_operations ich8_phy_ops = {
@@ -2595,6 +2972,7 @@ struct e1000_info e1000_ich8_info = {
 				  | FLAG_HAS_FLASH
 				  | FLAG_APME_IN_WUC,
 	.pba			= 8,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_ich8lan,
 	.mac_ops		= &ich8_mac_ops,
 	.phy_ops		= &ich8_phy_ops,
@@ -2613,6 +2991,7 @@ struct e1000_info e1000_ich9_info = {
 				  | FLAG_HAS_FLASH
 				  | FLAG_APME_IN_WUC,
 	.pba			= 10,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_ich8lan,
 	.mac_ops		= &ich8_mac_ops,
 	.phy_ops		= &ich8_phy_ops,
@@ -2631,6 +3010,25 @@ struct e1000_info e1000_ich10_info = {
 				  | FLAG_HAS_FLASH
 				  | FLAG_APME_IN_WUC,
 	.pba			= 10,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+struct e1000_info e1000_pch_info = {
+	.mac			= e1000_pchlan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_RX_CSUM_ENABLED
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.pba			= 26,
+	.max_hw_frame_size	= 4096,
 	.get_variants		= e1000_get_variants_ich8lan,
 	.mac_ops		= &ich8_mac_ops,
 	.phy_ops		= &ich8_phy_ops,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 18a4f5902f3..be6d9e99037 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,6 +378,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 
 	mac->get_link_status = 0;
 
+	if (hw->phy.type == e1000_phy_82578) {
+		ret_val = e1000_link_stall_workaround_hv(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/*
 	 * Check if there was DownShift, must be checked
 	 * immediately after link-up
@@ -1406,6 +1412,38 @@ s32 e1000e_id_led_init(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000e_setup_led_generic - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored.
+ **/
+s32 e1000e_setup_led_generic(struct e1000_hw *hw)
+{
+	u32 ledctl;
+
+	if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+		return -E1000_ERR_CONFIG;
+	}
+
+	if (hw->phy.media_type == e1000_media_type_fiber) {
+		ledctl = er32(LEDCTL);
+		hw->mac.ledctl_default = ledctl;
+		/* Turn off LED0 */
+		ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+		            E1000_LEDCTL_LED0_BLINK |
+		            E1000_LEDCTL_LED0_MODE_MASK);
+		ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+		           E1000_LEDCTL_LED0_MODE_SHIFT);
+		ew32(LEDCTL, ledctl);
+	} else if (hw->phy.media_type == e1000_media_type_copper) {
+		ew32(LEDCTL, hw->mac.ledctl_mode1);
+	}
+
+	return 0;
+}
+
+/**
  *  e1000e_cleanup_led_generic - Set LED config to default operation
  *  @hw: pointer to the HW structure
  *
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ca82f19a7ed..677f60490f6 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -48,7 +48,7 @@
 
 #include "e1000.h"
 
-#define DRV_VERSION "0.3.3.4-k4"
+#define DRV_VERSION "1.0.2-k2"
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -62,6 +62,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_ich8lan]		= &e1000_ich8_info,
 	[board_ich9lan]		= &e1000_ich9_info,
 	[board_ich10lan]	= &e1000_ich10_info,
+	[board_pchlan]		= &e1000_pch_info,
 };
 
 #ifdef DEBUG
@@ -2255,8 +2256,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 		ew32(TARC(1), tarc);
 	}
 
-	e1000e_config_collision_dist(hw);
-
 	/* Setup Transmit Descriptor Settings for eop descriptor */
 	adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
 
@@ -2269,6 +2268,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 
 	ew32(TCTL, tctl);
 
+	e1000e_config_collision_dist(hw);
+
 	adapter->tx_queue_len = adapter->netdev->tx_queue_len;
 }
 
@@ -2308,6 +2309,23 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	if (adapter->flags2 & FLAG2_CRC_STRIPPING)
 		rctl |= E1000_RCTL_SECRC;
 
+	/* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
+	if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
+		u16 phy_data;
+
+		e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
+		phy_data &= 0xfff8;
+		phy_data |= (1 << 2);
+		e1e_wphy(hw, PHY_REG(770, 26), phy_data);
+
+		e1e_rphy(hw, 22, &phy_data);
+		phy_data &= 0x0fff;
+		phy_data |= (1 << 14);
+		e1e_wphy(hw, 0x10, 0x2823);
+		e1e_wphy(hw, 0x11, 0x0003);
+		e1e_wphy(hw, 22, phy_data);
+	}
+
 	/* Setup buffer sizes */
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
@@ -2751,23 +2769,25 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	/*
 	 * flow control settings
 	 *
-	 * The high water mark must be low enough to fit one full frame
+	 * The high water mark must be low enough to fit two full frame
 	 * (or the size used for early receive) above it in the Rx FIFO.
 	 * Set it to the lower of:
 	 * - 90% of the Rx FIFO size, and
 	 * - the full Rx FIFO size minus the early receive size (for parts
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
-	 * - the full Rx FIFO size minus one full frame
+	 * - the full Rx FIFO size minus two full frames
 	 */
-	if (adapter->flags & FLAG_HAS_ERT)
+	if ((adapter->flags & FLAG_HAS_ERT) &&
+	    (adapter->netdev->mtu > ETH_DATA_LEN))
 		hwm = min(((pba << 10) * 9 / 10),
 			  ((pba << 10) - (E1000_ERT_2048 << 3)));
 	else
 		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - adapter->max_frame_size));
+			  ((pba << 10) - (2 * adapter->max_frame_size)));
 
-	fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
-	fc->low_water = fc->high_water - 8;
+	fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+	fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
+	fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
 
 	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
 		fc->pause_time = 0xFFFF;
@@ -2787,6 +2807,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
+	if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
+		e1e_wphy(&adapter->hw, BM_WUC, 0);
 
 	if (mac->ops.init_hw(hw))
 		e_err("Hardware Error\n");
@@ -2799,7 +2821,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	e1000e_reset_adaptive(hw);
 	e1000_get_phy_info(hw);
 
-	if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
+	if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
+	    !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
 		u16 phy_data = 0;
 		/*
 		 * speed up time to link by disabling smart power down, ignore
@@ -2826,6 +2849,8 @@ int e1000e_up(struct e1000_adapter *adapter)
 		e1000_configure_msix(adapter);
 	e1000_irq_enable(adapter);
 
+	netif_wake_queue(adapter->netdev);
+
 	/* fire a link change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
 	return 0;
@@ -2848,7 +2873,7 @@ void e1000e_down(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	/* flush and sleep below */
 
-	netif_tx_stop_all_queues(netdev);
+	netif_stop_queue(netdev);
 
 	/* disable transmits in the hardware */
 	tctl = er32(TCTL);
@@ -3072,6 +3097,8 @@ static int e1000_open(struct net_device *netdev)
 	if (test_bit(__E1000_TESTING, &adapter->state))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = e1000e_setup_tx_resources(adapter);
 	if (err)
@@ -3128,7 +3155,7 @@ static int e1000_open(struct net_device *netdev)
 
 	e1000_irq_enable(adapter);
 
-	netif_tx_start_all_queues(netdev);
+	netif_start_queue(netdev);
 
 	/* fire a link status change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
@@ -3262,6 +3289,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
+	u16 phy_data;
 
 	/*
 	 * Prevent stats update while adapter is being reset, or if the pci
@@ -3281,11 +3309,34 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.roc += er32(ROC);
 
 	adapter->stats.mpc += er32(MPC);
-	adapter->stats.scc += er32(SCC);
-	adapter->stats.ecol += er32(ECOL);
-	adapter->stats.mcc += er32(MCC);
-	adapter->stats.latecol += er32(LATECOL);
-	adapter->stats.dc += er32(DC);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
+		adapter->stats.scc += phy_data;
+
+		e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
+		e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
+		adapter->stats.ecol += phy_data;
+
+		e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
+		adapter->stats.mcc += phy_data;
+
+		e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
+		e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
+		adapter->stats.latecol += phy_data;
+
+		e1e_rphy(hw, HV_DC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_DC_LOWER, &phy_data);
+		adapter->stats.dc += phy_data;
+	} else {
+		adapter->stats.scc += er32(SCC);
+		adapter->stats.ecol += er32(ECOL);
+		adapter->stats.mcc += er32(MCC);
+		adapter->stats.latecol += er32(LATECOL);
+		adapter->stats.dc += er32(DC);
+	}
 	adapter->stats.xonrxc += er32(XONRXC);
 	adapter->stats.xontxc += er32(XONTXC);
 	adapter->stats.xoffrxc += er32(XOFFRXC);
@@ -3303,13 +3354,28 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 
 	hw->mac.tx_packet_delta = er32(TPT);
 	adapter->stats.tpt += hw->mac.tx_packet_delta;
-	hw->mac.collision_delta = er32(COLC);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
+		hw->mac.collision_delta = phy_data;
+	} else {
+		hw->mac.collision_delta = er32(COLC);
+	}
 	adapter->stats.colc += hw->mac.collision_delta;
 
 	adapter->stats.algnerrc += er32(ALGNERRC);
 	adapter->stats.rxerrc += er32(RXERRC);
-	if ((hw->mac.type != e1000_82574) && (hw->mac.type != e1000_82583))
-		adapter->stats.tncrs += er32(TNCRS);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
+		e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
+		adapter->stats.tncrs += phy_data;
+	} else {
+		if ((hw->mac.type != e1000_82574) &&
+		    (hw->mac.type != e1000_82583))
+			adapter->stats.tncrs += er32(TNCRS);
+	}
 	adapter->stats.cexterr += er32(CEXTERR);
 	adapter->stats.tsctc += er32(TSCTC);
 	adapter->stats.tsctfc += er32(TSCTFC);
@@ -3598,7 +3664,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 				phy->ops.cfg_on_link_up(hw);
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
@@ -3612,7 +3677,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 			printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
 			       adapter->netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
@@ -3649,6 +3713,8 @@ link_up:
 			 */
 			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -3850,7 +3916,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 		buffer_info->length = size;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
-		buffer_info->dma = map[0] + offset;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		count++;
 
 		len -= size;
@@ -3881,7 +3947,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
-			buffer_info->dma = map[f + 1] + offset;
+			buffer_info->dma = map[f] + offset;
 
 			len -= size;
 			offset += size;
@@ -4145,7 +4211,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
 	if (count) {
 		e1000_tx_queue(adapter, tx_flags, count);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
 
@@ -4206,27 +4271,17 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
-	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
-	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		e_err("Invalid MTU setting\n");
+	/* Jumbo frame support */
+	if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+	    !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+		e_err("Jumbo Frames not supported.\n");
 		return -EINVAL;
 	}
 
-	/* Jumbo frame size limits */
-	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
-		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			e_err("Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-		if (adapter->hw.phy.type == e1000_phy_ife) {
-			e_err("Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-	}
-
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
-	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		e_err("MTU > 9216 not supported.\n");
+	/* Supported frame sizes */
+	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
+	    (max_frame > adapter->max_hw_frame_size)) {
+		e_err("Unsupported MTU setting\n");
 		return -EINVAL;
 	}
 
@@ -4346,6 +4401,81 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	}
 }
 
+static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 i, mac_reg;
+	u16 phy_reg;
+	int retval = 0;
+
+	/* copy MAC RARs to PHY RARs */
+	for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
+		mac_reg = er32(RAL(i));
+		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+		mac_reg = er32(RAH(i));
+		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
+	}
+
+	/* copy MAC MTA to PHY MTA */
+	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
+		mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
+		e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
+	}
+
+	/* configure PHY Rx Control register */
+	e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
+	mac_reg = er32(RCTL);
+	if (mac_reg & E1000_RCTL_UPE)
+		phy_reg |= BM_RCTL_UPE;
+	if (mac_reg & E1000_RCTL_MPE)
+		phy_reg |= BM_RCTL_MPE;
+	phy_reg &= ~(BM_RCTL_MO_MASK);
+	if (mac_reg & E1000_RCTL_MO_3)
+		phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
+				<< BM_RCTL_MO_SHIFT);
+	if (mac_reg & E1000_RCTL_BAM)
+		phy_reg |= BM_RCTL_BAM;
+	if (mac_reg & E1000_RCTL_PMCF)
+		phy_reg |= BM_RCTL_PMCF;
+	mac_reg = er32(CTRL);
+	if (mac_reg & E1000_CTRL_RFCE)
+		phy_reg |= BM_RCTL_RFCE;
+	e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
+
+	/* enable PHY wakeup in MAC register */
+	ew32(WUFC, wufc);
+	ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
+
+	/* configure and enable PHY wakeup in PHY registers */
+	e1e_wphy(&adapter->hw, BM_WUFC, wufc);
+	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+
+	/* activate PHY wakeup */
+	retval = hw->phy.ops.acquire_phy(hw);
+	if (retval) {
+		e_err("Could not acquire PHY\n");
+		return retval;
+	}
+	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+	                         (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+	retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
+	if (retval) {
+		e_err("Could not read PHY page 769\n");
+		goto out;
+	}
+	phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
+	retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (retval)
+		e_err("Could not set PHY Host Wakeup bit\n");
+out:
+	hw->phy.ops.release_phy(hw);
+
+	return retval;
+}
+
 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4388,8 +4518,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		#define E1000_CTRL_ADVD3WUC 0x00100000
 		/* phy power management enable */
 		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
-		ctrl |= E1000_CTRL_ADVD3WUC |
-			E1000_CTRL_EN_PHY_PWR_MGMT;
+		ctrl |= E1000_CTRL_ADVD3WUC;
+		if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
+			ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
 		ew32(CTRL, ctrl);
 
 		if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
@@ -4407,8 +4538,17 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		/* Allow time for pending master requests to run */
 		e1000e_disable_pcie_master(&adapter->hw);
 
-		ew32(WUC, E1000_WUC_PME_EN);
-		ew32(WUFC, wufc);
+		if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) &&
+		    !(hw->mac.ops.check_mng_mode(hw))) {
+			/* enable wakeup by the PHY */
+			retval = e1000_init_phy_wakeup(adapter, wufc);
+			if (retval)
+				return retval;
+		} else {
+			/* enable wakeup by the MAC */
+			ew32(WUFC, wufc);
+			ew32(WUC, E1000_WUC_PME_EN);
+		}
 	} else {
 		ew32(WUC, 0);
 		ew32(WUFC, 0);
@@ -4551,8 +4691,37 @@ static int e1000_resume(struct pci_dev *pdev)
 	}
 
 	e1000e_power_up_phy(adapter);
+
+	/* report the system wakeup cause from S3/S4 */
+	if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
+		u16 phy_data;
+
+		e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
+		if (phy_data) {
+			e_info("PHY Wakeup cause - %s\n",
+				phy_data & E1000_WUS_EX ? "Unicast Packet" :
+				phy_data & E1000_WUS_MC ? "Multicast Packet" :
+				phy_data & E1000_WUS_BC ? "Broadcast Packet" :
+				phy_data & E1000_WUS_MAG ? "Magic Packet" :
+				phy_data & E1000_WUS_LNKC ? "Link Status "
+				" Change" : "other");
+		}
+		e1e_wphy(&adapter->hw, BM_WUS, ~0);
+	} else {
+		u32 wus = er32(WUS);
+		if (wus) {
+			e_info("MAC Wakeup cause - %s\n",
+				wus & E1000_WUS_EX ? "Unicast Packet" :
+				wus & E1000_WUS_MC ? "Multicast Packet" :
+				wus & E1000_WUS_BC ? "Broadcast Packet" :
+				wus & E1000_WUS_MAG ? "Magic Packet" :
+				wus & E1000_WUS_LNKC ? "Link Status Change" :
+				"other");
+		}
+		ew32(WUS, ~0);
+	}
+
 	e1000e_reset(adapter);
-	ew32(WUS, ~0);
 
 	e1000_init_manageability(adapter);
 
@@ -4842,6 +5011,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->flags2 = ei->flags2;
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
+	adapter->max_hw_frame_size = ei->max_hw_frame_size;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
 
 	mmio_start = pci_resource_start(pdev, 0);
@@ -4997,6 +5167,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		/* APME bit in EEPROM is mapped to WUC.APME */
 		eeprom_data = er32(WUC);
 		eeprom_apme_mask = E1000_WUC_APME;
+		if (eeprom_data & E1000_WUC_PHY_WAKE)
+			adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
 	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
 		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
 		    (adapter->hw.bus.func == 1))
@@ -5037,15 +5209,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
-	/* tell the stack to leave us alone until e1000_open() is called */
-	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
 	e1000_print_device_info(adapter);
 
 	return 0;
@@ -5199,6 +5370,11 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
 
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
+
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index e909f96698e..1342e0b1815 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -427,6 +427,8 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 			e1000_validate_option(&crc_stripping, &opt, adapter);
 			if (crc_stripping == OPTION_ENABLED)
 				adapter->flags2 |= FLAG2_CRC_STRIPPING;
+		} else {
+			adapter->flags2 |= FLAG2_CRC_STRIPPING;
 		}
 	}
 	{ /* Kumeran Lock Loss Workaround */
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index dc4a9cba6a7..e23459cf3d0 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -37,6 +37,9 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw);
 static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
 static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 					  u16 *data, bool read);
+static u32 e1000_get_phy_addr_for_hv_page(u32 page);
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+                                          u16 *data, bool read);
 
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
@@ -54,6 +57,55 @@ static const u16 e1000_igp_2_cable_length_table[] =
 #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_igp_2_cable_length_table)
 
+#define BM_PHY_REG_PAGE(offset) \
+	((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
+#define BM_PHY_REG_NUM(offset) \
+	((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
+	 (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
+		~MAX_PHY_REG_ADDRESS)))
+
+#define HV_INTC_FC_PAGE_START             768
+#define I82578_ADDR_REG                   29
+#define I82577_ADDR_REG                   16
+#define I82577_CFG_REG                    22
+#define I82577_CFG_ASSERT_CRS_ON_TX       (1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
+#define I82577_CTRL_REG                   23
+#define I82577_CTRL_DOWNSHIFT_MASK        (7 << 10)
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2            18
+#define I82577_PHY_STATUS_2          26
+#define I82577_PHY_DIAG_STATUS       31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY   0x0400
+#define I82577_PHY_STATUS2_MDIX           0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK     0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_AUTO_MDIX        0x0400
+#define I82577_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH       0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
+
+/* BM PHY Copper Specific Control 1 */
+#define BM_CS_CTRL1                       16
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS                      17
+#define BM_CS_STATUS_LINK_UP              0x0400
+#define BM_CS_STATUS_RESOLVED             0x0800
+#define BM_CS_STATUS_SPEED_MASK           0xC000
+#define BM_CS_STATUS_SPEED_1000           0x8000
+
+#define HV_MUX_DATA_CTRL               PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC    0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED   0x0004
+
 /**
  *  e1000e_check_reset_block_generic - Check if PHY reset is blocked
  *  @hw: pointer to the HW structure
@@ -82,23 +134,48 @@ s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
 s32 e1000e_get_phy_id(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 phy_id;
+	u16 retry_count = 0;
 
-	ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
-	if (ret_val)
-		return ret_val;
+	if (!(phy->ops.read_phy_reg))
+		goto out;
 
-	phy->id = (u32)(phy_id << 16);
-	udelay(20);
-	ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
-	if (ret_val)
-		return ret_val;
+	while (retry_count < 2) {
+		ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
+		if (ret_val)
+			goto out;
 
-	phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
-	phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+		phy->id = (u32)(phy_id << 16);
+		udelay(20);
+		ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
+		if (ret_val)
+			goto out;
 
-	return 0;
+		phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
+			goto out;
+
+		/*
+		 * If the PHY ID is still unknown, we may have an 82577i
+		 * without link.  We will try again after setting Slow
+		 * MDIC mode. No harm in trying again in this case since
+		 * the PHY ID is unknown at this point anyway
+		 */
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
+		if (ret_val)
+			goto out;
+
+		retry_count++;
+	}
+out:
+	/* Revert to MDIO fast mode, if applicable */
+	if (retry_count)
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
+	return ret_val;
 }
 
 /**
@@ -410,6 +487,43 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
+ *  e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Enable CRS on TX. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
+	if (ret_val)
+		goto out;
+
+	/* Set number of link attempts before downshift */
+	ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
+	if (ret_val)
+		goto out;
+	phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
+	ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
  *  @hw: pointer to the HW structure
  *
@@ -427,8 +541,8 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/* For newer PHYs this bit is downshift enable */
-	if (phy->type == e1000_phy_m88)
+	/* For BM PHY this bit is downshift enable */
+	if (phy->type != e1000_phy_bm)
 		phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
 
 	/*
@@ -520,10 +634,27 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 
 	/* Commit the changes. */
 	ret_val = e1000e_commit_phy(hw);
-	if (ret_val)
+	if (ret_val) {
 		hw_dbg(hw, "Error committing the PHY changes\n");
+		return ret_val;
+	}
 
-	return ret_val;
+	if (phy->type == e1000_phy_82578) {
+		ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		                            &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* 82578 PHY - set the downshift count to 1x. */
+		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
+		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
+		ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		                             phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return 0;
 }
 
 /**
@@ -1251,6 +1382,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 	switch (phy->type) {
 	case e1000_phy_m88:
 	case e1000_phy_gg82563:
+	case e1000_phy_82578:
+	case e1000_phy_82577:
 		offset	= M88E1000_PHY_SPEC_STATUS;
 		mask	= M88E1000_PSSR_DOWNSHIFT;
 		break;
@@ -1886,6 +2019,12 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	case BME1000_E_PHY_ID_R2:
 		phy_type = e1000_phy_bm;
 		break;
+	case I82578_E_PHY_ID:
+		phy_type = e1000_phy_82578;
+		break;
+	case I82577_E_PHY_ID:
+		phy_type = e1000_phy_82577;
+		break;
 	default:
 		phy_type = e1000_phy_unknown;
 		break;
@@ -2181,11 +2320,16 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 					  u16 *data, bool read)
 {
 	s32 ret_val;
-	u16 reg = ((u16)offset) & PHY_REG_MASK;
+	u16 reg = BM_PHY_REG_NUM(offset);
 	u16 phy_reg = 0;
 	u8  phy_acquired = 1;
 
 
+	/* Gig must be disabled for MDIO accesses to page 800 */
+	if ((hw->mac.type == e1000_pchlan) &&
+	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
+		hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+
 	ret_val = hw->phy.ops.acquire_phy(hw);
 	if (ret_val) {
 		phy_acquired = 0;
@@ -2289,3 +2433,524 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
 
 	return 0;
 }
+
+s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
+{
+	s32 ret_val = 0;
+	u16 data = 0;
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
+	hw->phy.addr = 1;
+	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+				         (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		hw->phy.ops.release_phy(hw);
+		return ret_val;
+	}
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
+	                                   (0x2180 | (slow << 10)));
+
+	/* dummy read when reverting to fast mode - throw away result */
+	if (!slow)
+		e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
+
+	hw->phy.ops.release_phy(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_phy_reg_hv -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphore before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	bool in_slow_mode = false;
+
+	/* Workaround failure in MDIO access while cable is disconnected */
+	if ((hw->phy.type == e1000_phy_82577) &&
+	    !(er32(STATUS) & E1000_STATUS_LU)) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
+		if (ret_val)
+			goto out;
+
+		in_slow_mode = true;
+	}
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
+		                                         data, true);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+		                                         data, true);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+	if (page == HV_INTC_FC_PAGE_START)
+		page = 0;
+
+	if (reg > MAX_PHY_MULTI_PAGE_REG) {
+		if ((hw->phy.type != e1000_phy_82578) ||
+		    ((reg != I82578_ADDR_REG) &&
+		     (reg != I82578_ADDR_REG + 1))) {
+			u32 phy_addr = hw->phy.addr;
+
+			hw->phy.addr = 1;
+
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000e_write_phy_reg_mdic(hw,
+			                             IGP01E1000_PHY_PAGE_SELECT,
+			                             (page << IGP_PAGE_SHIFT));
+			if (ret_val) {
+				hw->phy.ops.release_phy(hw);
+				goto out;
+			}
+			hw->phy.addr = phy_addr;
+		}
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+	                                  data);
+	hw->phy.ops.release_phy(hw);
+
+out:
+	/* Revert to MDIO fast mode, if applicable */
+	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	bool in_slow_mode = false;
+
+	/* Workaround failure in MDIO access while cable is disconnected */
+	if ((hw->phy.type == e1000_phy_82577) &&
+	    !(er32(STATUS) & E1000_STATUS_LU)) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
+		if (ret_val)
+			goto out;
+
+		in_slow_mode = true;
+	}
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
+		                                         &data, false);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+		                                         &data, false);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+	if (page == HV_INTC_FC_PAGE_START)
+		page = 0;
+
+	/*
+	 * Workaround MDIO accesses being disabled after entering IEEE Power
+	 * Down (whenever bit 11 of the PHY Control register is set)
+	 */
+	if ((hw->phy.type == e1000_phy_82578) &&
+	    (hw->phy.revision >= 1) &&
+	    (hw->phy.addr == 2) &&
+	    ((MAX_PHY_REG_ADDRESS & reg) == 0) &&
+	    (data & (1 << 11))) {
+		u16 data2 = 0x7EFF;
+		hw->phy.ops.release_phy(hw);
+		ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
+		                                         &data2, false);
+		if (ret_val)
+			goto out;
+
+		ret_val = hw->phy.ops.acquire_phy(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	if (reg > MAX_PHY_MULTI_PAGE_REG) {
+		if ((hw->phy.type != e1000_phy_82578) ||
+		    ((reg != I82578_ADDR_REG) &&
+		     (reg != I82578_ADDR_REG + 1))) {
+			u32 phy_addr = hw->phy.addr;
+
+			hw->phy.addr = 1;
+
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000e_write_phy_reg_mdic(hw,
+			                             IGP01E1000_PHY_PAGE_SELECT,
+			                             (page << IGP_PAGE_SHIFT));
+			if (ret_val) {
+				hw->phy.ops.release_phy(hw);
+				goto out;
+			}
+			hw->phy.addr = phy_addr;
+		}
+	}
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+	                                  data);
+	hw->phy.ops.release_phy(hw);
+
+out:
+	/* Revert to MDIO fast mode, if applicable */
+	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ *  @page: page to be accessed
+ **/
+static u32 e1000_get_phy_addr_for_hv_page(u32 page)
+{
+	u32 phy_addr = 2;
+
+	if (page >= HV_INTC_FC_PAGE_START)
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ *  e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read or written
+ *  @data: pointer to the data to be read or written
+ *  @read: determines if operation is read or written
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retreived information in data.  Release any acquired
+ *  semaphores before exiting.  Note that the procedure to read these regs
+ *  uses the address port and data port to read/write.
+ **/
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+                                          u16 *data, bool read)
+{
+	s32 ret_val;
+	u32 addr_reg = 0;
+	u32 data_reg = 0;
+	u8  phy_acquired = 1;
+
+	/* This takes care of the difference with desktop vs mobile phy */
+	addr_reg = (hw->phy.type == e1000_phy_82578) ?
+	           I82578_ADDR_REG : I82577_ADDR_REG;
+	data_reg = addr_reg + 1;
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val) {
+		hw_dbg(hw, "Could not acquire PHY\n");
+		phy_acquired = 0;
+		goto out;
+	}
+
+	/* All operations in this function are phy address 2 */
+	hw->phy.addr = 2;
+
+	/* masking with 0x3F to remove the page from offset */
+	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
+	if (ret_val) {
+		hw_dbg(hw, "Could not write PHY the HV address register\n");
+		goto out;
+	}
+
+	/* Read or write the data value next */
+	if (read)
+		ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
+	else
+		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
+
+	if (ret_val) {
+		hw_dbg(hw, "Could not read data value from HV data register\n");
+		goto out;
+	}
+
+out:
+	if (phy_acquired == 1)
+		hw->phy.ops.release_phy(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_link_stall_workaround_hv - Si workaround
+ *  @hw: pointer to the HW structure
+ *
+ *  This function works around a Si bug where the link partner can get
+ *  a link up indication before the PHY does.  If small packets are sent
+ *  by the link partner they can be placed in the packet buffer without
+ *  being properly accounted for by the PHY and will stall preventing
+ *  further packets from being received.  The workaround is to clear the
+ *  packet buffer after the PHY detects link up.
+ **/
+s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 data;
+
+	if (hw->phy.type != e1000_phy_82578)
+		goto out;
+
+	/* check if link is up and at 1Gbps */
+	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
+	if (ret_val)
+		goto out;
+
+	data &= BM_CS_STATUS_LINK_UP |
+	        BM_CS_STATUS_RESOLVED |
+	        BM_CS_STATUS_SPEED_MASK;
+
+	if (data != (BM_CS_STATUS_LINK_UP |
+	             BM_CS_STATUS_RESOLVED |
+	             BM_CS_STATUS_SPEED_1000))
+		goto out;
+
+	mdelay(200);
+
+	/* flush the packets in the fifo buffer */
+	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	                                HV_MUX_DATA_CTRL_GEN_TO_MAC |
+	                                HV_MUX_DATA_CTRL_FORCE_SPEED);
+	if (ret_val)
+		goto out;
+
+	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	                                HV_MUX_DATA_CTRL_GEN_TO_MAC);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_82577 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Clear Auto-Crossover to force MDI manually.  82577 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
+	phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		goto out;
+
+	hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			hw_dbg(hw, "Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_82577 - Retrieve I82577 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = e1000_check_polarity_82577(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
+
+	if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
+	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			goto out;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+		                ? e1000_1000t_rx_status_ok
+		                : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+		                 ? e1000_1000t_rx_status_ok
+		                 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		goto out;
+
+	length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+
+	if (length == E1000_CABLE_LENGTH_UNDEFINED)
+		ret_val = E1000_ERR_PHY;
+
+	phy->cable_length = length;
+
+out:
+	return ret_val;
+}
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 16a41389575..78952f8324e 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
 };
 
 /*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
  */
 struct ehea_eq_attr {
 	u32 type;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index b22dab9153f..147c4b088fb 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3261,7 +3261,7 @@ static ssize_t ehea_probe_port(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ehea_adapter *adapter = dev->driver_data;
+	struct ehea_adapter *adapter = dev_get_drvdata(dev);
 	struct ehea_port *port;
 	struct device_node *eth_dn = NULL;
 	int i;
@@ -3316,7 +3316,7 @@ static ssize_t ehea_remove_port(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct ehea_adapter *adapter = dev->driver_data;
+	struct ehea_adapter *adapter = dev_get_drvdata(dev);
 	struct ehea_port *port;
 	int i;
 	u32 logical_port_id;
@@ -3404,7 +3404,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
 
 	adapter->pd = EHEA_PD_ID;
 
-	dev->dev.driver_data = adapter;
+	dev_set_drvdata(&dev->dev, adapter);
 
 
 	/* initialize adapter and ports */
@@ -3468,7 +3468,7 @@ out:
 
 static int __devexit ehea_remove(struct of_device *dev)
 {
-	struct ehea_adapter *adapter = dev->dev.driver_data;
+	struct ehea_adapter *adapter = dev_get_drvdata(&dev->dev);
 	int i;
 
 	for (i = 0; i < EHEA_MAX_PORTS; i++)
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 9080f07da8f..8005b602f77 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -661,8 +661,6 @@ static int enic_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + 1)
 		netif_stop_queue(netdev);
 
-	netdev->trans_start = jiffies;
-
 	spin_unlock_irqrestore(&enic->wq_lock[0], flags);
 
 	return NETDEV_TX_OK;
diff --git a/drivers/net/eql.c b/drivers/net/eql.c
index 5210bb1027c..19b7dd98394 100644
--- a/drivers/net/eql.c
+++ b/drivers/net/eql.c
@@ -194,6 +194,7 @@ static void __init eql_setup(struct net_device *dev)
 
 	dev->type       	= ARPHRD_SLIP;
 	dev->tx_queue_len 	= 5;		/* Hands them off fast */
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 }
 
 static int eql_open(struct net_device *dev)
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 91a9b1a3376..ceb6a9c357a 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -811,7 +811,7 @@ static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(skb->len > ETHOC_BUFSIZ)) {
 		priv->stats.tx_errors++;
-		return -EMSGSIZE;
+		goto out;
 	}
 
 	entry = priv->cur_tx % priv->num_tx;
@@ -840,9 +840,9 @@ static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	dev->trans_start = jiffies;
-	dev_kfree_skb(skb);
-
 	spin_unlock_irq(&priv->lock);
+out:
+	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index 1a685a04d4b..1e972328140 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -873,7 +873,7 @@ static int ewrk3_queue_pkt (struct sk_buff *skb, struct net_device *dev)
 err_out:
 	ENABLE_IRQs;
 	spin_unlock_irq (&lp->hw_lock);
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 /*
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 682e7f0b558..0f19b743749 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -86,8 +86,7 @@ static unsigned char	fec_mac_default[] = {
 #endif
 #endif /* CONFIG_M5272 */
 
-/* Forward declarations of some structures to support different PHYs
-*/
+/* Forward declarations of some structures to support different PHYs */
 
 typedef struct {
 	uint mii_data;
@@ -123,8 +122,7 @@ typedef struct {
 #error "FEC: descriptor ring size constants too large"
 #endif
 
-/* Interrupt events/masks.
-*/
+/* Interrupt events/masks. */
 #define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
 #define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
 #define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
@@ -165,7 +163,7 @@ typedef struct {
  */
 struct fec_enet_private {
 	/* Hardware registers of the FEC device */
-	volatile fec_t	*hwp;
+	void __iomem *hwp;
 
 	struct net_device *netdev;
 
@@ -174,16 +172,20 @@ struct fec_enet_private {
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
 	unsigned char *tx_bounce[TX_RING_SIZE];
 	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
+	struct	sk_buff* rx_skbuff[RX_RING_SIZE];
 	ushort	skb_cur;
 	ushort	skb_dirty;
 
-	/* CPM dual port RAM relative addresses.
-	*/
+	/* CPM dual port RAM relative addresses */
 	dma_addr_t	bd_dma;
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
+	/* Address of Rx and Tx buffers */
+	struct bufdesc	*rx_bd_base;
+	struct bufdesc	*tx_bd_base;
+	/* The next free ring entry */
+	struct bufdesc	*cur_rx, *cur_tx; 
+	/* The ring entries to be free()ed */
+	struct bufdesc	*dirty_tx;
+
 	uint	tx_full;
 	/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
 	spinlock_t hw_lock;
@@ -209,17 +211,13 @@ struct fec_enet_private {
 	int	full_duplex;
 };
 
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static void fec_enet_mii(struct net_device *dev);
 static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
 static void fec_enet_tx(struct net_device *dev);
 static void fec_enet_rx(struct net_device *dev);
 static int fec_enet_close(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
 static void fec_restart(struct net_device *dev, int duplex);
 static void fec_stop(struct net_device *dev);
-static void fec_set_mac_address(struct net_device *dev);
 
 
 /* MII processing.  We keep this as simple as possible.  Requests are
@@ -241,19 +239,16 @@ static mii_list_t	*mii_tail;
 static int	mii_queue(struct net_device *dev, int request,
 				void (*func)(uint, struct net_device *));
 
-/* Make MII read/write commands for the FEC.
-*/
+/* Make MII read/write commands for the FEC */
 #define mk_mii_read(REG)	(0x60020000 | ((REG & 0x1f) << 18))
 #define mk_mii_write(REG, VAL)	(0x50020000 | ((REG & 0x1f) << 18) | \
 						(VAL & 0xffff))
 #define mk_mii_end	0
 
-/* Transmitter timeout.
-*/
-#define TX_TIMEOUT (2*HZ)
+/* Transmitter timeout */
+#define TX_TIMEOUT (2 * HZ)
 
-/* Register definitions for the PHY.
-*/
+/* Register definitions for the PHY */
 
 #define MII_REG_CR          0  /* Control Register                         */
 #define MII_REG_SR          1  /* Status Register                          */
@@ -288,18 +283,14 @@ static int	mii_queue(struct net_device *dev, int request,
 static int
 fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t	*bdp;
+	struct fec_enet_private *fep = netdev_priv(dev);
+	struct bufdesc *bdp;
 	unsigned short	status;
 	unsigned long flags;
 
-	fep = netdev_priv(dev);
-	fecp = (volatile fec_t*)dev->base_addr;
-
 	if (!fep->link) {
 		/* Link is down or autonegotiation is in progress. */
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irqsave(&fep->hw_lock, flags);
@@ -307,30 +298,27 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	bdp = fep->cur_tx;
 
 	status = bdp->cbd_sc;
-#ifndef final_version
+
 	if (status & BD_ENET_TX_READY) {
 		/* Ooops.  All transmit buffers are full.  Bail out.
 		 * This should not happen, since dev->tbusy should be set.
 		 */
 		printk("%s: tx queue full!.\n", dev->name);
 		spin_unlock_irqrestore(&fep->hw_lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
-#endif
 
-	/* Clear all of the status flags.
-	 */
+	/* Clear all of the status flags */
 	status &= ~BD_ENET_TX_STATS;
 
-	/* Set buffer length and buffer pointer.
-	*/
+	/* Set buffer length and buffer pointer */
 	bdp->cbd_bufaddr = __pa(skb->data);
 	bdp->cbd_datlen = skb->len;
 
 	/*
-	 *	On some FEC implementations data must be aligned on
-	 *	4-byte boundaries. Use bounce buffers to copy data
-	 *	and get it aligned. Ugh.
+	 * On some FEC implementations data must be aligned on
+	 * 4-byte boundaries. Use bounce buffers to copy data
+	 * and get it aligned. Ugh.
 	 */
 	if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
 		unsigned int index;
@@ -339,8 +327,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
 	}
 
-	/* Save skb pointer.
-	*/
+	/* Save skb pointer */
 	fep->tx_skbuff[fep->skb_cur] = skb;
 
 	dev->stats.tx_bytes += skb->len;
@@ -349,13 +336,12 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Push the data cache so the CPM does not get stale memory
 	 * data.
 	 */
-	dma_sync_single(NULL, bdp->cbd_bufaddr,
-			bdp->cbd_datlen, DMA_TO_DEVICE);
+	bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
 
 	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
 	 * it's the last BD of the frame, and to put the CRC on the end.
 	 */
-
 	status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
 			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
 	bdp->cbd_sc = status;
@@ -363,22 +349,20 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 	/* Trigger transmission start */
-	fecp->fec_x_des_active = 0;
+	writel(0, fep->hwp + FEC_X_DES_ACTIVE);
 
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (status & BD_ENET_TX_WRAP) {
+	/* If this was the last BD in the ring, start at the beginning again. */
+	if (status & BD_ENET_TX_WRAP)
 		bdp = fep->tx_bd_base;
-	} else {
+	else
 		bdp++;
-	}
 
 	if (bdp == fep->dirty_tx) {
 		fep->tx_full = 1;
 		netif_stop_queue(dev);
 	}
 
-	fep->cur_tx = (cbd_t *)bdp;
+	fep->cur_tx = bdp;
 
 	spin_unlock_irqrestore(&fep->hw_lock, flags);
 
@@ -390,75 +374,33 @@ fec_timeout(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 
-	printk("%s: transmit timed out.\n", dev->name);
 	dev->stats.tx_errors++;
-#ifndef final_version
-	{
-	int	i;
-	cbd_t	*bdp;
-
-	printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
-	       (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
-	       (unsigned long)fep->dirty_tx,
-	       (unsigned long)fep->cur_rx);
-
-	bdp = fep->tx_bd_base;
-	printk(" tx: %u buffers\n",  TX_RING_SIZE);
-	for (i = 0 ; i < TX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       (int) bdp->cbd_bufaddr);
-		bdp++;
-	}
 
-	bdp = fep->rx_bd_base;
-	printk(" rx: %lu buffers\n",  (unsigned long) RX_RING_SIZE);
-	for (i = 0 ; i < RX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       (int) bdp->cbd_bufaddr);
-		bdp++;
-	}
-	}
-#endif
 	fec_restart(dev, fep->full_duplex);
 	netif_wake_queue(dev);
 }
 
-/* The interrupt handler.
- * This is called from the MPC core interrupt.
- */
 static irqreturn_t
 fec_enet_interrupt(int irq, void * dev_id)
 {
 	struct	net_device *dev = dev_id;
-	volatile fec_t	*fecp;
+	struct fec_enet_private *fep = netdev_priv(dev);
 	uint	int_events;
 	irqreturn_t ret = IRQ_NONE;
 
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
 	do {
-		int_events = fecp->fec_ievent;
-		fecp->fec_ievent = int_events;
+		int_events = readl(fep->hwp + FEC_IEVENT);
+		writel(int_events, fep->hwp + FEC_IEVENT);
 
-		/* Handle receive event in its own function.
-		 */
 		if (int_events & FEC_ENET_RXF) {
 			ret = IRQ_HANDLED;
 			fec_enet_rx(dev);
 		}
 
 		/* Transmit OK, or non-fatal error. Update the buffer
-		   descriptors. FEC handles all errors, we just discover
-		   them as part of the transmit process.
-		*/
+		 * descriptors. FEC handles all errors, we just discover
+		 * them as part of the transmit process.
+		 */
 		if (int_events & FEC_ENET_TXF) {
 			ret = IRQ_HANDLED;
 			fec_enet_tx(dev);
@@ -479,7 +421,7 @@ static void
 fec_enet_tx(struct net_device *dev)
 {
 	struct	fec_enet_private *fep;
-	volatile cbd_t	*bdp;
+	struct bufdesc *bdp;
 	unsigned short status;
 	struct	sk_buff	*skb;
 
@@ -488,7 +430,11 @@ fec_enet_tx(struct net_device *dev)
 	bdp = fep->dirty_tx;
 
 	while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
-		if (bdp == fep->cur_tx && fep->tx_full == 0) break;
+		if (bdp == fep->cur_tx && fep->tx_full == 0)
+			break;
+
+		dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+		bdp->cbd_bufaddr = 0;
 
 		skb = fep->tx_skbuff[fep->skb_dirty];
 		/* Check for errors. */
@@ -510,31 +456,27 @@ fec_enet_tx(struct net_device *dev)
 			dev->stats.tx_packets++;
 		}
 
-#ifndef final_version
 		if (status & BD_ENET_TX_READY)
 			printk("HEY! Enet xmit interrupt and TX_READY.\n");
-#endif
+
 		/* Deferred means some collisions occurred during transmit,
 		 * but we eventually sent the packet OK.
 		 */
 		if (status & BD_ENET_TX_DEF)
 			dev->stats.collisions++;
 
-		/* Free the sk buffer associated with this last transmit.
-		 */
+		/* Free the sk buffer associated with this last transmit */
 		dev_kfree_skb_any(skb);
 		fep->tx_skbuff[fep->skb_dirty] = NULL;
 		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
 
-		/* Update pointer to next buffer descriptor to be transmitted.
-		 */
+		/* Update pointer to next buffer descriptor to be transmitted */
 		if (status & BD_ENET_TX_WRAP)
 			bdp = fep->tx_bd_base;
 		else
 			bdp++;
 
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
+		/* Since we have freed up a buffer, the ring is no longer full
 		 */
 		if (fep->tx_full) {
 			fep->tx_full = 0;
@@ -542,7 +484,7 @@ fec_enet_tx(struct net_device *dev)
 				netif_wake_queue(dev);
 		}
 	}
-	fep->dirty_tx = (cbd_t *)bdp;
+	fep->dirty_tx = bdp;
 	spin_unlock_irq(&fep->hw_lock);
 }
 
@@ -555,9 +497,8 @@ fec_enet_tx(struct net_device *dev)
 static void
 fec_enet_rx(struct net_device *dev)
 {
-	struct	fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t *bdp;
+	struct	fec_enet_private *fep = netdev_priv(dev);
+	struct bufdesc *bdp;
 	unsigned short status;
 	struct	sk_buff	*skb;
 	ushort	pkt_len;
@@ -567,9 +508,6 @@ fec_enet_rx(struct net_device *dev)
 	flush_cache_all();
 #endif
 
-	fep = netdev_priv(dev);
-	fecp = (volatile fec_t*)dev->base_addr;
-
 	spin_lock_irq(&fep->hw_lock);
 
 	/* First, grab all of the stats for the incoming packet.
@@ -577,143 +515,121 @@ fec_enet_rx(struct net_device *dev)
 	 */
 	bdp = fep->cur_rx;
 
-while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
+	while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
 
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame,
-	 * the last indicator should be set.
-	 */
-	if ((status & BD_ENET_RX_LAST) == 0)
-		printk("FEC ENET: rcv is not +last\n");
-#endif
+		/* Since we have allocated space to hold a complete frame,
+		 * the last indicator should be set.
+		 */
+		if ((status & BD_ENET_RX_LAST) == 0)
+			printk("FEC ENET: rcv is not +last\n");
 
-	if (!fep->opened)
-		goto rx_processing_done;
+		if (!fep->opened)
+			goto rx_processing_done;
 
-	/* Check for errors. */
-	if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+		/* Check for errors. */
+		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
 			   BD_ENET_RX_CR | BD_ENET_RX_OV)) {
-		dev->stats.rx_errors++;
-		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
-		/* Frame too long or too short. */
-			dev->stats.rx_length_errors++;
+			dev->stats.rx_errors++;
+			if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+				/* Frame too long or too short. */
+				dev->stats.rx_length_errors++;
+			}
+			if (status & BD_ENET_RX_NO)	/* Frame alignment */
+				dev->stats.rx_frame_errors++;
+			if (status & BD_ENET_RX_CR)	/* CRC Error */
+				dev->stats.rx_crc_errors++;
+			if (status & BD_ENET_RX_OV)	/* FIFO overrun */
+				dev->stats.rx_fifo_errors++;
 		}
-		if (status & BD_ENET_RX_NO)	/* Frame alignment */
+
+		/* Report late collisions as a frame error.
+		 * On this error, the BD is closed, but we don't know what we
+		 * have in the buffer.  So, just drop this frame on the floor.
+		 */
+		if (status & BD_ENET_RX_CL) {
+			dev->stats.rx_errors++;
 			dev->stats.rx_frame_errors++;
-		if (status & BD_ENET_RX_CR)	/* CRC Error */
-			dev->stats.rx_crc_errors++;
-		if (status & BD_ENET_RX_OV)	/* FIFO overrun */
-			dev->stats.rx_fifo_errors++;
-	}
+			goto rx_processing_done;
+		}
 
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (status & BD_ENET_RX_CL) {
-		dev->stats.rx_errors++;
-		dev->stats.rx_frame_errors++;
-		goto rx_processing_done;
-	}
+		/* Process the incoming frame. */
+		dev->stats.rx_packets++;
+		pkt_len = bdp->cbd_datlen;
+		dev->stats.rx_bytes += pkt_len;
+		data = (__u8*)__va(bdp->cbd_bufaddr);
 
-	/* Process the incoming frame.
-	 */
-	dev->stats.rx_packets++;
-	pkt_len = bdp->cbd_datlen;
-	dev->stats.rx_bytes += pkt_len;
-	data = (__u8*)__va(bdp->cbd_bufaddr);
-
-	dma_sync_single(NULL, (unsigned long)__pa(data),
-			pkt_len - 4, DMA_FROM_DEVICE);
-
-	/* This does 16 byte alignment, exactly what we need.
-	 * The packet length includes FCS, but we don't want to
-	 * include that when passing upstream as it messes up
-	 * bridging applications.
-	 */
-	skb = dev_alloc_skb(pkt_len-4);
+	        dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
+        			DMA_FROM_DEVICE);
 
-	if (skb == NULL) {
-		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-		dev->stats.rx_dropped++;
-	} else {
-		skb_put(skb,pkt_len-4);	/* Make room */
-		skb_copy_to_linear_data(skb, data, pkt_len-4);
-		skb->protocol=eth_type_trans(skb,dev);
-		netif_rx(skb);
-	}
-  rx_processing_done:
+		/* This does 16 byte alignment, exactly what we need.
+		 * The packet length includes FCS, but we don't want to
+		 * include that when passing upstream as it messes up
+		 * bridging applications.
+		 */
+		skb = dev_alloc_skb(pkt_len - 4 + NET_IP_ALIGN);
 
-	/* Clear the status flags for this buffer.
-	*/
-	status &= ~BD_ENET_RX_STATS;
+		if (unlikely(!skb)) {
+			printk("%s: Memory squeeze, dropping packet.\n",
+					dev->name);
+			dev->stats.rx_dropped++;
+		} else {
+			skb_reserve(skb, NET_IP_ALIGN);
+			skb_put(skb, pkt_len - 4);	/* Make room */
+			skb_copy_to_linear_data(skb, data, pkt_len - 4);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+		}
 
-	/* Mark the buffer empty.
-	*/
-	status |= BD_ENET_RX_EMPTY;
-	bdp->cbd_sc = status;
+        	bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen,
+			DMA_FROM_DEVICE);
+rx_processing_done:
+		/* Clear the status flags for this buffer */
+		status &= ~BD_ENET_RX_STATS;
 
-	/* Update BD pointer to next entry.
-	*/
-	if (status & BD_ENET_RX_WRAP)
-		bdp = fep->rx_bd_base;
-	else
-		bdp++;
+		/* Mark the buffer empty */
+		status |= BD_ENET_RX_EMPTY;
+		bdp->cbd_sc = status;
 
-#if 1
-	/* Doing this here will keep the FEC running while we process
-	 * incoming frames.  On a heavily loaded network, we should be
-	 * able to keep up at the expense of system resources.
-	 */
-	fecp->fec_r_des_active = 0;
-#endif
-   } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */
-	fep->cur_rx = (cbd_t *)bdp;
-
-#if 0
-	/* Doing this here will allow us to process all frames in the
-	 * ring before the FEC is allowed to put more there.  On a heavily
-	 * loaded network, some frames may be lost.  Unfortunately, this
-	 * increases the interrupt overhead since we can potentially work
-	 * our way back to the interrupt return only to come right back
-	 * here.
-	 */
-	fecp->fec_r_des_active = 0;
-#endif
+		/* Update BD pointer to next entry */
+		if (status & BD_ENET_RX_WRAP)
+			bdp = fep->rx_bd_base;
+		else
+			bdp++;
+		/* Doing this here will keep the FEC running while we process
+		 * incoming frames.  On a heavily loaded network, we should be
+		 * able to keep up at the expense of system resources.
+		 */
+		writel(0, fep->hwp + FEC_R_DES_ACTIVE);
+	}
+	fep->cur_rx = bdp;
 
 	spin_unlock_irq(&fep->hw_lock);
 }
 
-
 /* called from interrupt context */
 static void
 fec_enet_mii(struct net_device *dev)
 {
 	struct	fec_enet_private *fep;
-	volatile fec_t	*ep;
 	mii_list_t	*mip;
-	uint		mii_reg;
 
 	fep = netdev_priv(dev);
 	spin_lock_irq(&fep->mii_lock);
 
-	ep = fep->hwp;
-	mii_reg = ep->fec_mii_data;
-
 	if ((mip = mii_head) == NULL) {
 		printk("MII and no head!\n");
 		goto unlock;
 	}
 
 	if (mip->mii_func != NULL)
-		(*(mip->mii_func))(mii_reg, dev);
+		(*(mip->mii_func))(readl(fep->hwp + FEC_MII_DATA), dev);
 
 	mii_head = mip->mii_next;
 	mip->mii_next = mii_free;
 	mii_free = mip;
 
 	if ((mip = mii_head) != NULL)
-		ep->fec_mii_data = mip->mii_regval;
+		writel(mip->mii_regval, fep->hwp + FEC_MII_DATA);
 
 unlock:
 	spin_unlock_irq(&fep->mii_lock);
@@ -727,8 +643,7 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
 	mii_list_t	*mip;
 	int		retval;
 
-	/* Add PHY address to register command.
-	*/
+	/* Add PHY address to register command */
 	fep = netdev_priv(dev);
 	spin_lock_irqsave(&fep->mii_lock, flags);
 
@@ -745,7 +660,7 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
 			mii_tail = mip;
 		} else {
 			mii_head = mii_tail = mip;
-			fep->hwp->fec_mii_data = regval;
+			writel(regval, fep->hwp + FEC_MII_DATA);
 		}
 	} else {
 		retval = 1;
@@ -1246,11 +1161,8 @@ static void __inline__ fec_phy_ack_intr(void)
 static void __inline__ fec_get_mac(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
-	volatile fec_t *fecp;
 	unsigned char *iap, tmpaddr[ETH_ALEN];
 
-	fecp = fep->hwp;
-
 	if (FEC_FLASHMAC) {
 		/*
 		 * Get MAC address from FLASH.
@@ -1264,8 +1176,8 @@ static void __inline__ fec_get_mac(struct net_device *dev)
 		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
 			iap = fec_mac_default;
 	} else {
-		*((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
-		*((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+		*((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
+		*((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
 		iap = &tmpaddr[0];
 	}
 
@@ -1375,11 +1287,6 @@ static void mii_relink(struct work_struct *work)
 		fec_restart(dev, duplex);
 	} else
 		fec_stop(dev);
-
-#if 0
-	enable_irq(fep->mii_irq);
-#endif
-
 }
 
 /* mii_queue_relink is called in interrupt context from mii_link_interrupt */
@@ -1388,12 +1295,12 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev)
 	struct fec_enet_private *fep = netdev_priv(dev);
 
 	/*
-	** We cannot queue phy_task twice in the workqueue.  It
-	** would cause an endless loop in the workqueue.
-	** Fortunately, if the last mii_relink entry has not yet been
-	** executed now, it will do the job for the current interrupt,
-	** which is just what we want.
-	*/
+	 * We cannot queue phy_task twice in the workqueue.  It
+	 * would cause an endless loop in the workqueue.
+	 * Fortunately, if the last mii_relink entry has not yet been
+	 * executed now, it will do the job for the current interrupt,
+	 * which is just what we want.
+	 */
 	if (fep->mii_phy_task_queued)
 		return;
 
@@ -1424,8 +1331,7 @@ phy_cmd_t const phy_cmd_config[] = {
 	{ mk_mii_end, }
 	};
 
-/* Read remainder of PHY ID.
-*/
+/* Read remainder of PHY ID. */
 static void
 mii_discover_phy3(uint mii_reg, struct net_device *dev)
 {
@@ -1457,17 +1363,14 @@ static void
 mii_discover_phy(uint mii_reg, struct net_device *dev)
 {
 	struct fec_enet_private *fep;
-	volatile fec_t *fecp;
 	uint phytype;
 
 	fep = netdev_priv(dev);
-	fecp = fep->hwp;
 
 	if (fep->phy_addr < 32) {
 		if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
 
-			/* Got first part of ID, now get remainder.
-			*/
+			/* Got first part of ID, now get remainder */
 			fep->phy_id = phytype << 16;
 			mii_queue(dev, mk_mii_read(MII_REG_PHYIR2),
 							mii_discover_phy3);
@@ -1479,15 +1382,15 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
 	} else {
 		printk("FEC: No PHY device found.\n");
 		/* Disable external MII interface */
-		fecp->fec_mii_speed = fep->phy_speed = 0;
+		writel(0, fep->hwp + FEC_MII_SPEED);
+		fep->phy_speed = 0;
 #ifdef HAVE_mii_link_interrupt
 		fec_disable_phy_intr();
 #endif
 	}
 }
 
-/* This interrupt occurs when the PHY detects a link change.
-*/
+/* This interrupt occurs when the PHY detects a link change */
 #ifdef HAVE_mii_link_interrupt
 static irqreturn_t
 mii_link_interrupt(int irq, void * dev_id)
@@ -1497,10 +1400,6 @@ mii_link_interrupt(int irq, void * dev_id)
 
 	fec_phy_ack_intr();
 
-#if 0
-	disable_irq(fep->mii_irq);  /* disable now, enable later */
-#endif
-
 	mii_do_cmd(dev, fep->phy->ack_int);
 	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
 
@@ -1508,19 +1407,91 @@ mii_link_interrupt(int irq, void * dev_id)
 }
 #endif
 
+static void fec_enet_free_buffers(struct net_device *dev)
+{
+	struct fec_enet_private *fep = netdev_priv(dev);
+	int i;
+	struct sk_buff *skb;
+	struct bufdesc	*bdp;
+
+	bdp = fep->rx_bd_base;
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		skb = fep->rx_skbuff[i];
+
+		if (bdp->cbd_bufaddr)
+			dma_unmap_single(&dev->dev, bdp->cbd_bufaddr,
+					FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
+		if (skb)
+			dev_kfree_skb(skb);
+		bdp++;
+	}
+
+	bdp = fep->tx_bd_base;
+	for (i = 0; i < TX_RING_SIZE; i++)
+		kfree(fep->tx_bounce[i]);
+}
+
+static int fec_enet_alloc_buffers(struct net_device *dev)
+{
+	struct fec_enet_private *fep = netdev_priv(dev);
+	int i;
+	struct sk_buff *skb;
+	struct bufdesc	*bdp;
+
+	bdp = fep->rx_bd_base;
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		skb = dev_alloc_skb(FEC_ENET_RX_FRSIZE);
+		if (!skb) {
+			fec_enet_free_buffers(dev);
+			return -ENOMEM;
+		}
+		fep->rx_skbuff[i] = skb;
+
+		bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+				FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
+		bdp->cbd_sc = BD_ENET_RX_EMPTY;
+		bdp++;
+	}
+
+	/* Set the last buffer to wrap. */
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+
+	bdp = fep->tx_bd_base;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL);
+
+		bdp->cbd_sc = 0;
+		bdp->cbd_bufaddr = 0;
+		bdp++;
+	}
+
+	/* Set the last buffer to wrap. */
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+
+	return 0;
+}
+
 static int
 fec_enet_open(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
+	int ret;
 
 	/* I should reset the ring buffers here, but I don't yet know
 	 * a simple way to do that.
 	 */
-	fec_set_mac_address(dev);
+
+	ret = fec_enet_alloc_buffers(dev);
+	if (ret)
+		return ret;
 
 	fep->sequence_done = 0;
 	fep->link = 0;
 
+	fec_restart(dev, 1);
+
 	if (fep->phy) {
 		mii_do_cmd(dev, fep->phy->ack_int);
 		mii_do_cmd(dev, fep->phy->config);
@@ -1537,21 +1508,17 @@ fec_enet_open(struct net_device *dev)
 			schedule();
 
 		mii_do_cmd(dev, fep->phy->startup);
-
-		/* Set the initial link state to true. A lot of hardware
-		 * based on this device does not implement a PHY interrupt,
-		 * so we are never notified of link change.
-		 */
-		fep->link = 1;
-	} else {
-		fep->link = 1; /* lets just try it and see */
-		/* no phy,  go full duplex,  it's most likely a hub chip */
-		fec_restart(dev, 1);
 	}
 
+	/* Set the initial link state to true. A lot of hardware
+	 * based on this device does not implement a PHY interrupt,
+	 * so we are never notified of link change.
+	 */
+	fep->link = 1;
+
 	netif_start_queue(dev);
 	fep->opened = 1;
-	return 0;		/* Success */
+	return 0;
 }
 
 static int
@@ -1559,12 +1526,13 @@ fec_enet_close(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 
-	/* Don't know what to do yet.
-	*/
+	/* Don't know what to do yet. */
 	fep->opened = 0;
 	netif_stop_queue(dev);
 	fec_stop(dev);
 
+        fec_enet_free_buffers(dev);
+
 	return 0;
 }
 
@@ -1583,87 +1551,102 @@ fec_enet_close(struct net_device *dev)
 
 static void set_multicast_list(struct net_device *dev)
 {
-	struct fec_enet_private *fep;
-	volatile fec_t *ep;
+	struct fec_enet_private *fep = netdev_priv(dev);
 	struct dev_mc_list *dmi;
-	unsigned int i, j, bit, data, crc;
+	unsigned int i, j, bit, data, crc, tmp;
 	unsigned char hash;
 
-	fep = netdev_priv(dev);
-	ep = fep->hwp;
+	if (dev->flags & IFF_PROMISC) {
+		tmp = readl(fep->hwp + FEC_R_CNTRL);
+		tmp |= 0x8;
+		writel(tmp, fep->hwp + FEC_R_CNTRL);
+		return;
+	}
 
-	if (dev->flags&IFF_PROMISC) {
-		ep->fec_r_cntrl |= 0x0008;
-	} else {
+	tmp = readl(fep->hwp + FEC_R_CNTRL);
+	tmp &= ~0x8;
+	writel(tmp, fep->hwp + FEC_R_CNTRL);
+
+	if (dev->flags & IFF_ALLMULTI) {
+		/* Catch all multicast addresses, so set the
+		 * filter to all 1's
+		 */
+		writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+		writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
 
-		ep->fec_r_cntrl &= ~0x0008;
+		return;
+	}
 
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fec_grp_hash_table_high = 0xffffffff;
-			ep->fec_grp_hash_table_low = 0xffffffff;
-		} else {
-			/* Clear filter and add the addresses in hash register.
-			*/
-			ep->fec_grp_hash_table_high = 0;
-			ep->fec_grp_hash_table_low = 0;
-
-			dmi = dev->mc_list;
-
-			for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
-			{
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* calculate crc32 value of mac address
-				*/
-				crc = 0xffffffff;
-
-				for (i = 0; i < dmi->dmi_addrlen; i++)
-				{
-					data = dmi->dmi_addr[i];
-					for (bit = 0; bit < 8; bit++, data >>= 1)
-					{
-						crc = (crc >> 1) ^
-						(((crc ^ data) & 1) ? CRC32_POLY : 0);
-					}
-				}
-
-				/* only upper 6 bits (HASH_BITS) are used
-				   which point to specific bit in he hash registers
-				*/
-				hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
-				if (hash > 31)
-					ep->fec_grp_hash_table_high |= 1 << (hash - 32);
-				else
-					ep->fec_grp_hash_table_low |= 1 << hash;
+	/* Clear filter and add the addresses in hash register
+	 */
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+
+	dmi = dev->mc_list;
+
+	for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) {
+		/* Only support group multicast for now */
+		if (!(dmi->dmi_addr[0] & 1))
+			continue;
+
+		/* calculate crc32 value of mac address */
+		crc = 0xffffffff;
+
+		for (i = 0; i < dmi->dmi_addrlen; i++) {
+			data = dmi->dmi_addr[i];
+			for (bit = 0; bit < 8; bit++, data >>= 1) {
+				crc = (crc >> 1) ^
+				(((crc ^ data) & 1) ? CRC32_POLY : 0);
 			}
 		}
+
+		/* only upper 6 bits (HASH_BITS) are used
+		 * which point to specific bit in he hash registers
+		 */
+		hash = (crc >> (32 - HASH_BITS)) & 0x3f;
+
+		if (hash > 31) {
+			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+			tmp |= 1 << (hash - 32);
+			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+		} else {
+			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+			tmp |= 1 << hash;
+			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+		}
 	}
 }
 
-/* Set a MAC change in hardware.
- */
-static void
-fec_set_mac_address(struct net_device *dev)
+/* Set a MAC change in hardware. */
+static int
+fec_set_mac_address(struct net_device *dev, void *p)
 {
-	volatile fec_t *fecp;
+	struct fec_enet_private *fep = netdev_priv(dev);
+	struct sockaddr *addr = p;
 
-	fecp = ((struct fec_enet_private *)netdev_priv(dev))->hwp;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
 
-	/* Set station address. */
-	fecp->fec_addr_low = dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
-		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24);
-	fecp->fec_addr_high = (dev->dev_addr[5] << 16) |
-		(dev->dev_addr[4] << 24);
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 
+	writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
+		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
+		fep->hwp + FEC_ADDR_LOW);
+	writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
+		fep + FEC_ADDR_HIGH);
+	return 0;
 }
 
+static const struct net_device_ops fec_netdev_ops = {
+	.ndo_open		= fec_enet_open,
+	.ndo_stop		= fec_enet_close,
+	.ndo_start_xmit		= fec_enet_start_xmit,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_tx_timeout		= fec_timeout,
+	.ndo_set_mac_address	= fec_set_mac_address,
+};
+
  /*
   * XXX:  We need to clean up on failure exits here.
   *
@@ -1672,17 +1655,13 @@ fec_set_mac_address(struct net_device *dev)
 int __init fec_enet_init(struct net_device *dev, int index)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
-	unsigned long	mem_addr;
-	volatile cbd_t	*bdp;
-	cbd_t		*cbd_base;
-	volatile fec_t	*fecp;
-	int 		i, j;
+	struct bufdesc *cbd_base;
+	int i;
 
-	/* Allocate memory for buffer descriptors.
-	*/
-	mem_addr = (unsigned long)dma_alloc_coherent(NULL, PAGE_SIZE,
-			&fep->bd_dma, GFP_KERNEL);
-	if (mem_addr == 0) {
+	/* Allocate memory for buffer descriptors. */
+	cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
+			GFP_KERNEL);
+	if (!cbd_base) {
 		printk("FEC: allocate descriptor memory failed?\n");
 		return -ENOMEM;
 	}
@@ -1690,146 +1669,47 @@ int __init fec_enet_init(struct net_device *dev, int index)
 	spin_lock_init(&fep->hw_lock);
 	spin_lock_init(&fep->mii_lock);
 
-	/* Create an Ethernet device instance.
-	*/
-	fecp = (volatile fec_t *)dev->base_addr;
-
 	fep->index = index;
-	fep->hwp = fecp;
+	fep->hwp = (void __iomem *)dev->base_addr;
 	fep->netdev = dev;
 
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = 1;
-	udelay(10);
-
 	/* Set the Ethernet address */
 #ifdef CONFIG_M5272
 	fec_get_mac(dev);
 #else
 	{
 		unsigned long l;
-		l = fecp->fec_addr_low;
+		l = readl(fep->hwp + FEC_ADDR_LOW);
 		dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
 		dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
 		dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
 		dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
-		l = fecp->fec_addr_high;
+		l = readl(fep->hwp + FEC_ADDR_HIGH);
 		dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
 		dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
 	}
 #endif
 
-	cbd_base = (cbd_t *)mem_addr;
-
-	/* Set receive and transmit descriptor base.
-	*/
+	/* Set receive and transmit descriptor base. */
 	fep->rx_bd_base = cbd_base;
 	fep->tx_bd_base = cbd_base + RX_RING_SIZE;
 
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->cur_rx = fep->rx_bd_base;
-
-	fep->skb_cur = fep->skb_dirty = 0;
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	for (i=0; i<FEC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-		/* XXX: missing check for allocation failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += FEC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* ...and the same for transmmit.
-	*/
-	bdp = fep->tx_bd_base;
-	for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) {
-		if (j >= FEC_ENET_TX_FRPPG) {
-			mem_addr = __get_free_page(GFP_KERNEL);
-			j = 1;
-		} else {
-			mem_addr += FEC_ENET_TX_FRSIZE;
-			j++;
-		}
-		fep->tx_bounce[i] = (unsigned char *) mem_addr;
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = fep->bd_dma;
-	fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
-				* RX_RING_SIZE;
-
 #ifdef HAVE_mii_link_interrupt
 	fec_request_mii_intr(dev);
 #endif
-
-	fecp->fec_grp_hash_table_high = 0;
-	fecp->fec_grp_hash_table_low = 0;
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-	fecp->fec_ecntrl = 2;
-	fecp->fec_r_des_active = 0;
-#ifndef CONFIG_M5272
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low = 0;
-#endif
-
-	/* The FEC Ethernet specific entries in the device structure. */
-	dev->open = fec_enet_open;
-	dev->hard_start_xmit = fec_enet_start_xmit;
-	dev->tx_timeout = fec_timeout;
+	/* The FEC Ethernet specific entries in the device structure */
 	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = fec_enet_close;
-	dev->set_multicast_list = set_multicast_list;
+	dev->netdev_ops = &fec_netdev_ops;
 
 	for (i=0; i<NMII-1; i++)
 		mii_cmds[i].mii_next = &mii_cmds[i+1];
 	mii_free = mii_cmds;
 
-	/* setup MII interface */
-	fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
-	fecp->fec_x_cntrl = 0x00;
-
-	/*
-	 * Set MII speed to 2.5 MHz
-	 */
+	/* Set MII speed to 2.5 MHz */
 	fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
 					/ 2500000) / 2) & 0x3F) << 1;
-	fecp->fec_mii_speed = fep->phy_speed;
 	fec_restart(dev, 0);
 
-	/* Clear and enable interrupts */
-	fecp->fec_ievent = 0xffc00000;
-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
-
 	/* Queue up command to detect the PHY and initialize the
 	 * remainder of the interface.
 	 */
@@ -1847,145 +1727,118 @@ int __init fec_enet_init(struct net_device *dev, int index)
 static void
 fec_restart(struct net_device *dev, int duplex)
 {
-	struct fec_enet_private *fep;
-	volatile cbd_t *bdp;
-	volatile fec_t *fecp;
+	struct fec_enet_private *fep = netdev_priv(dev);
+	struct bufdesc *bdp;
 	int i;
 
-	fep = netdev_priv(dev);
-	fecp = fep->hwp;
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = 1;
+	/* Whack a reset.  We should wait for this. */
+	writel(1, fep->hwp + FEC_ECNTRL);
 	udelay(10);
 
-	/* Clear any outstanding interrupt.
-	*/
-	fecp->fec_ievent = 0xffc00000;
+	/* Clear any outstanding interrupt. */
+	writel(0xffc00000, fep->hwp + FEC_IEVENT);
 
-	/* Set station address.
-	*/
-	fec_set_mac_address(dev);
+	/* Reset all multicast.	*/
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+#ifndef CONFIG_M5272
+	writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
+	writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
+#endif
 
-	/* Reset all multicast.
-	*/
-	fecp->fec_grp_hash_table_high = 0;
-	fecp->fec_grp_hash_table_low = 0;
+	/* Set maximum receive buffer size. */
+	writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
 
-	/* Set maximum receive buffer size.
-	*/
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = fep->bd_dma;
-	fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
-				* RX_RING_SIZE;
+	/* Set receive and transmit descriptor base. */
+	writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
+	writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE,
+			fep->hwp + FEC_X_DES_START);
 
 	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
 	fep->cur_rx = fep->rx_bd_base;
 
-	/* Reset SKB transmit buffers.
-	*/
+	/* Reset SKB transmit buffers. */
 	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
+	for (i = 0; i <= TX_RING_MOD_MASK; i++) {
+		if (fep->tx_skbuff[i]) {
 			dev_kfree_skb_any(fep->tx_skbuff[i]);
 			fep->tx_skbuff[i] = NULL;
 		}
 	}
 
-	/* Initialize the receive buffer descriptors.
-	*/
+	/* Initialize the receive buffer descriptors. */
 	bdp = fep->rx_bd_base;
-	for (i=0; i<RX_RING_SIZE; i++) {
+	for (i = 0; i < RX_RING_SIZE; i++) {
 
-		/* Initialize the BD for every fragment in the page.
-		*/
+		/* Initialize the BD for every fragment in the page. */
 		bdp->cbd_sc = BD_ENET_RX_EMPTY;
 		bdp++;
 	}
 
-	/* Set the last buffer to wrap.
-	*/
+	/* Set the last buffer to wrap */
 	bdp--;
 	bdp->cbd_sc |= BD_SC_WRAP;
 
-	/* ...and the same for transmmit.
-	*/
+	/* ...and the same for transmit */
 	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
+	for (i = 0; i < TX_RING_SIZE; i++) {
 
-		/* Initialize the BD for every fragment in the page.
-		*/
+		/* Initialize the BD for every fragment in the page. */
 		bdp->cbd_sc = 0;
 		bdp->cbd_bufaddr = 0;
 		bdp++;
 	}
 
-	/* Set the last buffer to wrap.
-	*/
+	/* Set the last buffer to wrap */
 	bdp--;
 	bdp->cbd_sc |= BD_SC_WRAP;
 
-	/* Enable MII mode.
-	*/
+	/* Enable MII mode */
 	if (duplex) {
-		fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */
-		fecp->fec_x_cntrl = 0x04;		  /* FD enable */
+		/* MII enable / FD enable */
+		writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL);
+		writel(0x04, fep->hwp + FEC_X_CNTRL);
 	} else {
-		/* MII enable|No Rcv on Xmit */
-		fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06;
-		fecp->fec_x_cntrl = 0x00;
+		/* MII enable / No Rcv on Xmit */
+		writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL);
+		writel(0x0, fep->hwp + FEC_X_CNTRL);
 	}
 	fep->full_duplex = duplex;
 
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
+	/* Set MII speed */
+	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
-	/* And last, enable the transmit and receive processing.
-	*/
-	fecp->fec_ecntrl = 2;
-	fecp->fec_r_des_active = 0;
+	/* And last, enable the transmit and receive processing */
+	writel(2, fep->hwp + FEC_ECNTRL);
+	writel(0, fep->hwp + FEC_R_DES_ACTIVE);
 
-	/* Enable interrupts we wish to service.
-	*/
-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
+	/* Enable interrupts we wish to service */
+	writel(FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII,
+			fep->hwp + FEC_IMASK);
 }
 
 static void
 fec_stop(struct net_device *dev)
 {
-	volatile fec_t *fecp;
-	struct fec_enet_private *fep;
-
-	fep = netdev_priv(dev);
-	fecp = fep->hwp;
+	struct fec_enet_private *fep = netdev_priv(dev);
 
-	/*
-	** We cannot expect a graceful transmit stop without link !!!
-	*/
-	if (fep->link)
-		{
-		fecp->fec_x_cntrl = 0x01;	/* Graceful transmit stop */
+	/* We cannot expect a graceful transmit stop without link !!! */
+	if (fep->link) {
+		writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
 		udelay(10);
-		if (!(fecp->fec_ievent & FEC_ENET_GRA))
+		if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
 			printk("fec_stop : Graceful transmit stop did not complete !\n");
-		}
+	}
 
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = 1;
+	/* Whack a reset.  We should wait for this. */
+	writel(1, fep->hwp + FEC_ECNTRL);
 	udelay(10);
 
-	/* Clear outstanding MII command interrupts.
-	*/
-	fecp->fec_ievent = FEC_ENET_MII;
+	/* Clear outstanding MII command interrupts. */
+	writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
 
-	fecp->fec_imask = FEC_ENET_MII;
-	fecp->fec_mii_speed = fep->phy_speed;
+	writel(FEC_ENET_MII, fep->hwp + FEC_IMASK);
+	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 }
 
 static int __devinit
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 76c64c92e19..30b7dd67133 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -20,82 +20,55 @@
  *	registers in the same peripheral device on different models
  *	of the ColdFire!
  */
-typedef struct fec {
-	unsigned long	fec_reserved0;
-	unsigned long	fec_ievent;		/* Interrupt event reg */
-	unsigned long	fec_imask;		/* Interrupt mask reg */
-	unsigned long	fec_reserved1;
-	unsigned long	fec_r_des_active;	/* Receive descriptor reg */
-	unsigned long	fec_x_des_active;	/* Transmit descriptor reg */
-	unsigned long	fec_reserved2[3];
-	unsigned long	fec_ecntrl;		/* Ethernet control reg */
-	unsigned long	fec_reserved3[6];
-	unsigned long	fec_mii_data;		/* MII manage frame reg */
-	unsigned long	fec_mii_speed;		/* MII speed control reg */
-	unsigned long	fec_reserved4[7];
-	unsigned long	fec_mib_ctrlstat;	/* MIB control/status reg */
-	unsigned long	fec_reserved5[7];
-	unsigned long	fec_r_cntrl;		/* Receive control reg */
-	unsigned long	fec_reserved6[15];
-	unsigned long	fec_x_cntrl;		/* Transmit Control reg */
-	unsigned long	fec_reserved7[7];
-	unsigned long	fec_addr_low;		/* Low 32bits MAC address */
-	unsigned long	fec_addr_high;		/* High 16bits MAC address */
-	unsigned long	fec_opd;		/* Opcode + Pause duration */
-	unsigned long	fec_reserved8[10];
-	unsigned long	fec_hash_table_high;	/* High 32bits hash table */
-	unsigned long	fec_hash_table_low;	/* Low 32bits hash table */
-	unsigned long	fec_grp_hash_table_high;/* High 32bits hash table */
-	unsigned long	fec_grp_hash_table_low;	/* Low 32bits hash table */
-	unsigned long	fec_reserved9[7];
-	unsigned long	fec_x_wmrk;		/* FIFO transmit water mark */
-	unsigned long	fec_reserved10;
-	unsigned long	fec_r_bound;		/* FIFO receive bound reg */
-	unsigned long	fec_r_fstart;		/* FIFO receive start reg */
-	unsigned long	fec_reserved11[11];
-	unsigned long	fec_r_des_start;	/* Receive descriptor ring */
-	unsigned long	fec_x_des_start;	/* Transmit descriptor ring */
-	unsigned long	fec_r_buff_size;	/* Maximum receive buff size */
-} fec_t;
+#define FEC_IEVENT		0x004 /* Interrupt event reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_R_DES_ACTIVE	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE	0x014 /* Transmit descriptor reg */
+#define FEC_ECNTRL		0x024 /* Ethernet control reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_MIB_CTRLSTAT	0x064 /* MIB control/status reg */
+#define FEC_R_CNTRL		0x084 /* Receive control reg */
+#define FEC_X_CNTRL		0x0c4 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x0e4 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x0e8 /* High 16bits MAC address */
+#define FEC_OPD			0x0ec /* Opcode + Pause duration */
+#define FEC_HASH_TABLE_HIGH	0x118 /* High 32bits hash table */
+#define FEC_HASH_TABLE_LOW	0x11c /* Low 32bits hash table */
+#define FEC_GRP_HASH_TABLE_HIGH	0x120 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x124 /* Low 32bits hash table */
+#define FEC_X_WMRK		0x144 /* FIFO transmit water mark */
+#define FEC_R_BOUND		0x14c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x150 /* FIFO receive start reg */
+#define FEC_R_DES_START		0x180 /* Receive descriptor ring */
+#define FEC_X_DES_START		0x184 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE		0x188 /* Maximum receive buff size */
 
 #else
 
-/*
- *	Define device register set address map.
- */
-typedef struct fec {
-	unsigned long	fec_ecntrl;		/* Ethernet control reg */
-	unsigned long	fec_ievent;		/* Interrupt even reg */
-	unsigned long	fec_imask;		/* Interrupt mask reg */
-	unsigned long	fec_ivec;		/* Interrupt vec status reg */
-	unsigned long	fec_r_des_active;	/* Receive descriptor reg */
-	unsigned long	fec_x_des_active;	/* Transmit descriptor reg */
-	unsigned long	fec_reserved1[10];
-	unsigned long	fec_mii_data;		/* MII manage frame reg */
-	unsigned long	fec_mii_speed;		/* MII speed control reg */
-	unsigned long	fec_reserved2[17];
-	unsigned long	fec_r_bound;		/* FIFO receive bound reg */
-	unsigned long	fec_r_fstart;		/* FIFO receive start reg */
-	unsigned long	fec_reserved3[4];
-	unsigned long	fec_x_wmrk;		/* FIFO transmit water mark */
-	unsigned long	fec_reserved4;
-	unsigned long	fec_x_fstart;		/* FIFO transmit start reg */
-	unsigned long	fec_reserved5[21];
-	unsigned long	fec_r_cntrl;		/* Receive control reg */
-	unsigned long	fec_max_frm_len;	/* Maximum frame length reg */
-	unsigned long	fec_reserved6[14];
-	unsigned long	fec_x_cntrl;		/* Transmit Control reg */
-	unsigned long	fec_reserved7[158];
-	unsigned long	fec_addr_low;		/* Low 32bits MAC address */
-	unsigned long	fec_addr_high;		/* High 16bits MAC address */
-	unsigned long	fec_grp_hash_table_high;/* High 32bits hash table */
-	unsigned long	fec_grp_hash_table_low;	/* Low 32bits hash table */
-	unsigned long	fec_r_des_start;	/* Receive descriptor ring */
-	unsigned long	fec_x_des_start;	/* Transmit descriptor ring */
-	unsigned long	fec_r_buff_size;	/* Maximum receive buff size */
-	unsigned long	reserved8[9];
-	unsigned long	fec_fifo_ram[112];	/* FIFO RAM buffer */
-} fec_t;
+#define FEC_ECNTRL;		0x000 /* Ethernet control reg */
+#define FEC_IEVENT;		0x004 /* Interrupt even reg */
+#define FEC_IMASK;		0x008 /* Interrupt mask reg */
+#define FEC_IVEC;		0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE;	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE;	0x01c /* Transmit descriptor reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_R_BOUND		0x08c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x090 /* FIFO receive start reg */
+#define FEC_X_WMRK		0x0a4 /* FIFO transmit water mark */
+#define FEC_X_FSTART		0x0ac /* FIFO transmit start reg */
+#define FEC_R_CNTRL		0x104 /* Receive control reg */
+#define FEC_MAX_FRM_LEN		0x108 /* Maximum frame length reg */
+#define FEC_X_CNTRL		0x144 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x3c0 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x3c4 /* High 16bits MAC address */
+#define FEC_GRP_HASH_TABLE_HIGH	0x3c8 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x3cc /* Low 32bits hash table */
+#define FEC_R_DES_START		0x3d0 /* Receive descriptor ring */
+#define FEC_X_DES_START		0x3d4 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE		0x3d8 /* Maximum receive buff size */
+#define FEC_FIFO_RAM		0x400 /* FIFO RAM buffer */
 
 #endif /* CONFIG_M5272 */
 
@@ -104,17 +77,17 @@ typedef struct fec {
  *	Define the buffer descriptor structure.
  */
 #ifdef CONFIG_ARCH_MXC
-typedef struct bufdesc {
+struct bufdesc {
 	unsigned short cbd_datlen;	/* Data length */
 	unsigned short cbd_sc;	/* Control and status info */
 	unsigned long cbd_bufaddr;	/* Buffer address */
-} cbd_t;
+};
 #else
-typedef struct bufdesc {
+struct bufdesc {
 	unsigned short	cbd_sc;			/* Control and status info */
 	unsigned short	cbd_datlen;		/* Data length */
 	unsigned long	cbd_bufaddr;		/* Buffer address */
-} cbd_t;
+};
 #endif
 
 /*
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 8bbe7f61799..7d443405bbe 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -25,6 +25,7 @@
 #include <linux/hardirq.h>
 #include <linux/delay.h>
 #include <linux/of_device.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <linux/netdevice.h>
@@ -43,11 +44,9 @@
 
 #define DRIVER_NAME "mpc52xx-fec"
 
-#define FEC5200_PHYADDR_NONE	(-1)
-#define FEC5200_PHYADDR_7WIRE	(-2)
-
 /* Private driver data structure */
 struct mpc52xx_fec_priv {
+	struct net_device *ndev;
 	int duplex;
 	int speed;
 	int r_irq;
@@ -59,10 +58,11 @@ struct mpc52xx_fec_priv {
 	int msg_enable;
 
 	/* MDIO link details */
-	int phy_addr;
-	unsigned int phy_speed;
+	unsigned int mdio_speed;
+	struct device_node *phy_node;
 	struct phy_device *phydev;
 	enum phy_state link;
+	int seven_wire_mode;
 };
 
 
@@ -211,85 +211,25 @@ static void mpc52xx_fec_adjust_link(struct net_device *dev)
 		phy_print_status(phydev);
 }
 
-static int mpc52xx_fec_init_phy(struct net_device *dev)
-{
-	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-	struct phy_device *phydev;
-	char phy_id[BUS_ID_SIZE];
-
-	snprintf(phy_id, sizeof(phy_id), "%x:%02x",
-			(unsigned int)dev->base_addr, priv->phy_addr);
-
-	priv->link = PHY_DOWN;
-	priv->speed = 0;
-	priv->duplex = -1;
-
-	phydev = phy_connect(dev, phy_id, &mpc52xx_fec_adjust_link, 0, PHY_INTERFACE_MODE_MII);
-	if (IS_ERR(phydev)) {
-		dev_err(&dev->dev, "phy_connect failed\n");
-		return PTR_ERR(phydev);
-	}
-	dev_info(&dev->dev, "attached phy %i to driver %s\n",
-			phydev->addr, phydev->drv->name);
-
-	priv->phydev = phydev;
-
-	return 0;
-}
-
-static int mpc52xx_fec_phy_start(struct net_device *dev)
-{
-	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-	int err;
-
-	if (priv->phy_addr < 0)
-		return 0;
-
-	err = mpc52xx_fec_init_phy(dev);
-	if (err) {
-		dev_err(&dev->dev, "mpc52xx_fec_init_phy failed\n");
-		return err;
-	}
-
-	/* reset phy - this also wakes it from PDOWN */
-	phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
-	phy_start(priv->phydev);
-
-	return 0;
-}
-
-static void mpc52xx_fec_phy_stop(struct net_device *dev)
-{
-	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-
-	if (!priv->phydev)
-		return;
-
-	phy_disconnect(priv->phydev);
-	/* power down phy */
-	phy_stop(priv->phydev);
-	phy_write(priv->phydev, MII_BMCR, BMCR_PDOWN);
-}
-
-static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
-{
-	struct mpc52xx_fec __iomem *fec = priv->fec;
-
-	if (priv->phydev)
-		return;
-
-	out_be32(&fec->mii_speed, priv->phy_speed);
-}
-
 static int mpc52xx_fec_open(struct net_device *dev)
 {
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	int err = -EBUSY;
 
+	if (priv->phy_node) {
+		priv->phydev = of_phy_connect(priv->ndev, priv->phy_node,
+					      mpc52xx_fec_adjust_link, 0, 0);
+		if (!priv->phydev) {
+			dev_err(&dev->dev, "of_phy_connect failed\n");
+			return -ENODEV;
+		}
+		phy_start(priv->phydev);
+	}
+
 	if (request_irq(dev->irq, &mpc52xx_fec_interrupt, IRQF_SHARED,
 	                DRIVER_NAME "_ctrl", dev)) {
 		dev_err(&dev->dev, "ctrl interrupt request failed\n");
-		goto out;
+		goto free_phy;
 	}
 	if (request_irq(priv->r_irq, &mpc52xx_fec_rx_interrupt, 0,
 	                DRIVER_NAME "_rx", dev)) {
@@ -311,10 +251,6 @@ static int mpc52xx_fec_open(struct net_device *dev)
 		goto free_irqs;
 	}
 
-	err = mpc52xx_fec_phy_start(dev);
-	if (err)
-		goto free_skbs;
-
 	bcom_enable(priv->rx_dmatsk);
 	bcom_enable(priv->tx_dmatsk);
 
@@ -324,16 +260,18 @@ static int mpc52xx_fec_open(struct net_device *dev)
 
 	return 0;
 
- free_skbs:
-	mpc52xx_fec_free_rx_buffers(dev, priv->rx_dmatsk);
-
  free_irqs:
 	free_irq(priv->t_irq, dev);
  free_2irqs:
 	free_irq(priv->r_irq, dev);
  free_ctrl_irq:
 	free_irq(dev->irq, dev);
- out:
+ free_phy:
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
 
 	return err;
 }
@@ -352,7 +290,12 @@ static int mpc52xx_fec_close(struct net_device *dev)
 	free_irq(priv->r_irq, dev);
 	free_irq(priv->t_irq, dev);
 
-	mpc52xx_fec_phy_stop(dev);
+	if (priv->phydev) {
+		/* power down phy */
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
 
 	return 0;
 }
@@ -696,7 +639,7 @@ static void mpc52xx_fec_hw_init(struct net_device *dev)
 	/* set phy speed.
 	 * this can't be done in phy driver, since it needs to be called
 	 * before fec stuff (even on resume) */
-	mpc52xx_fec_phy_hw_init(priv);
+	out_be32(&fec->mii_speed, priv->mdio_speed);
 }
 
 /**
@@ -732,7 +675,7 @@ static void mpc52xx_fec_start(struct net_device *dev)
 	rcntrl = FEC_RX_BUFFER_SIZE << 16;	/* max frame length */
 	rcntrl |= FEC_RCNTRL_FCE;
 
-	if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
+	if (!priv->seven_wire_mode)
 		rcntrl |= FEC_RCNTRL_MII_MODE;
 
 	if (priv->duplex == DUPLEX_FULL)
@@ -798,8 +741,6 @@ static void mpc52xx_fec_stop(struct net_device *dev)
 
 	/* Stop FEC */
 	out_be32(&fec->ecntrl, in_be32(&fec->ecntrl) & ~FEC_ECNTRL_ETHER_EN);
-
-	return;
 }
 
 /* reset fec and bestcomm tasks */
@@ -817,9 +758,11 @@ static void mpc52xx_fec_reset(struct net_device *dev)
 
 	mpc52xx_fec_hw_init(dev);
 
-	phy_stop(priv->phydev);
-	phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
-	phy_start(priv->phydev);
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
+		phy_start(priv->phydev);
+	}
 
 	bcom_fec_rx_reset(priv->rx_dmatsk);
 	bcom_fec_tx_reset(priv->tx_dmatsk);
@@ -919,8 +862,6 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	struct net_device *ndev;
 	struct mpc52xx_fec_priv *priv = NULL;
 	struct resource mem;
-	struct device_node *phy_node;
-	const phandle *phy_handle;
 	const u32 *prop;
 	int prop_size;
 
@@ -933,6 +874,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 		return -ENOMEM;
 
 	priv = netdev_priv(ndev);
+	priv->ndev = ndev;
 
 	/* Reserve FEC control zone */
 	rv = of_address_to_resource(op->node, 0, &mem);
@@ -956,6 +898,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	ndev->ethtool_ops	= &mpc52xx_fec_ethtool_ops;
 	ndev->watchdog_timeo	= FEC_WATCHDOG_TIMEOUT;
 	ndev->base_addr		= mem.start;
+	SET_NETDEV_DEV(ndev, &op->dev);
 
 	spin_lock_init(&priv->lock);
 
@@ -1003,14 +946,9 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	 */
 
 	/* Start with safe defaults for link connection */
-	priv->phy_addr = FEC5200_PHYADDR_NONE;
 	priv->speed = 100;
 	priv->duplex = DUPLEX_HALF;
-	priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
-
-	/* the 7-wire property means don't use MII mode */
-	if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
-		priv->phy_addr = FEC5200_PHYADDR_7WIRE;
+	priv->mdio_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
 
 	/* The current speed preconfigures the speed of the MII link */
 	prop = of_get_property(op->node, "current-speed", &prop_size);
@@ -1019,43 +957,23 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 		priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
 	}
 
-	/* If there is a phy handle, setup link to that phy */
-	phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
-	if (phy_handle && (prop_size >= sizeof(phandle))) {
-		phy_node = of_find_node_by_phandle(*phy_handle);
-		prop = of_get_property(phy_node, "reg", &prop_size);
-		if (prop && (prop_size >= sizeof(u32)))
-			if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
-				priv->phy_addr = *prop;
-		of_node_put(phy_node);
+	/* If there is a phy handle, then get the PHY node */
+	priv->phy_node = of_parse_phandle(op->node, "phy-handle", 0);
+
+	/* the 7-wire property means don't use MII mode */
+	if (of_find_property(op->node, "fsl,7-wire-mode", NULL)) {
+		priv->seven_wire_mode = 1;
+		dev_info(&ndev->dev, "using 7-wire PHY mode\n");
 	}
 
 	/* Hardware init */
 	mpc52xx_fec_hw_init(ndev);
-
 	mpc52xx_fec_reset_stats(ndev);
 
-	SET_NETDEV_DEV(ndev, &op->dev);
-
-	/* Register the new network device */
 	rv = register_netdev(ndev);
 	if (rv < 0)
 		goto probe_error;
 
-	/* Now report the link setup */
-	switch (priv->phy_addr) {
-	 case FEC5200_PHYADDR_NONE:
-		dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
-			 priv->speed, priv->duplex ? 'F' : 'H');
-		break;
-	 case FEC5200_PHYADDR_7WIRE:
-		dev_info(&ndev->dev, "using 7-wire PHY mode\n");
-		break;
-	 default:
-		dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
-			 priv->phy_addr);
-	}
-
 	/* We're done ! */
 	dev_set_drvdata(&op->dev, ndev);
 
@@ -1065,6 +983,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	/* Error handling - free everything that might be allocated */
 probe_error:
 
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	priv->phy_node = NULL;
+
 	irq_dispose_mapping(ndev->irq);
 
 	if (priv->rx_dmatsk)
@@ -1093,6 +1015,10 @@ mpc52xx_fec_remove(struct of_device *op)
 
 	unregister_netdev(ndev);
 
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	priv->phy_node = NULL;
+
 	irq_dispose_mapping(ndev->irq);
 
 	bcom_fec_rx_release(priv->rx_dmatsk);
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index dd9bfa42ac3..fec9f245116 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -14,12 +14,14 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <linux/of_platform.h>
+#include <linux/of_mdio.h>
 #include <asm/io.h>
 #include <asm/mpc52xx.h>
 #include "fec_mpc52xx.h"
 
 struct mpc52xx_fec_mdio_priv {
 	struct mpc52xx_fec __iomem *regs;
+	int mdio_irqs[PHY_MAX_ADDR];
 };
 
 static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
@@ -27,7 +29,7 @@ static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
 {
 	struct mpc52xx_fec_mdio_priv *priv = bus->priv;
 	struct mpc52xx_fec __iomem *fec;
-	int tries = 100;
+	int tries = 3;
 
 	value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
 	value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
@@ -38,7 +40,7 @@ static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
 
 	/* wait for it to finish, this takes about 23 us on lite5200b */
 	while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
-		udelay(5);
+		msleep(1);
 
 	if (!tries)
 		return -ETIMEDOUT;
@@ -64,7 +66,6 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 {
 	struct device *dev = &of->dev;
 	struct device_node *np = of->node;
-	struct device_node *child = NULL;
 	struct mii_bus *bus;
 	struct mpc52xx_fec_mdio_priv *priv;
 	struct resource res = {};
@@ -85,22 +86,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 	bus->write = mpc52xx_fec_mdio_write;
 
 	/* setup irqs */
-	bus->irq = kmalloc(sizeof(bus->irq[0]) * PHY_MAX_ADDR, GFP_KERNEL);
-	if (bus->irq == NULL) {
-		err = -ENOMEM;
-		goto out_free;
-	}
-	for (i=0; i<PHY_MAX_ADDR; i++)
-		bus->irq[i] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		if (irq != NO_IRQ) {
-			const u32 *id = of_get_property(child, "reg", NULL);
-			if (id)
-				bus->irq[*id] = irq;
-		}
-	}
+	bus->irq = priv->mdio_irqs;
 
 	/* setup registers */
 	err = of_address_to_resource(np, 0, &res);
@@ -122,7 +108,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 	out_be32(&priv->regs->mii_speed,
 		((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
 
-	err = mdiobus_register(bus);
+	err = of_mdiobus_register(bus, np);
 	if (err)
 		goto out_unmap;
 
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9f6a68fb7b4..b60a3041b64 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -77,27 +77,31 @@
  * Hardware access:
  */
 
-#define DEV_NEED_TIMERIRQ          0x000001  /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER         0x000002  /* poll link settings. Relies on the timer irq */
-#define DEV_HAS_LARGEDESC          0x000004  /* device supports jumbo frames and needs packet format 2 */
-#define DEV_HAS_HIGH_DMA           0x000008  /* device supports 64bit dma */
-#define DEV_HAS_CHECKSUM           0x000010  /* device supports tx and rx checksum offloads */
-#define DEV_HAS_VLAN               0x000020  /* device supports vlan tagging and striping */
-#define DEV_HAS_MSI                0x000040  /* device supports MSI */
-#define DEV_HAS_MSI_X              0x000080  /* device supports MSI-X */
-#define DEV_HAS_POWER_CNTRL        0x000100  /* device supports power savings */
-#define DEV_HAS_STATISTICS_V1      0x000200  /* device supports hw statistics version 1 */
-#define DEV_HAS_STATISTICS_V2      0x000600  /* device supports hw statistics version 2 */
-#define DEV_HAS_STATISTICS_V3      0x000e00  /* device supports hw statistics version 3 */
-#define DEV_HAS_TEST_EXTENDED      0x001000  /* device supports extended diagnostic test */
-#define DEV_HAS_MGMT_UNIT          0x002000  /* device supports management unit */
-#define DEV_HAS_CORRECT_MACADDR    0x004000  /* device supports correct mac address order */
-#define DEV_HAS_COLLISION_FIX      0x008000  /* device supports tx collision fix */
-#define DEV_HAS_PAUSEFRAME_TX_V1   0x010000  /* device supports tx pause frames version 1 */
-#define DEV_HAS_PAUSEFRAME_TX_V2   0x020000  /* device supports tx pause frames version 2 */
-#define DEV_HAS_PAUSEFRAME_TX_V3   0x040000  /* device supports tx pause frames version 3 */
-#define DEV_NEED_TX_LIMIT          0x080000  /* device needs to limit tx */
-#define DEV_HAS_GEAR_MODE          0x100000  /* device supports gear mode */
+#define DEV_NEED_TIMERIRQ          0x0000001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER         0x0000002  /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC          0x0000004  /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA           0x0000008  /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM           0x0000010  /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN               0x0000020  /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI                0x0000040  /* device supports MSI */
+#define DEV_HAS_MSI_X              0x0000080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL        0x0000100  /* device supports power savings */
+#define DEV_HAS_STATISTICS_V1      0x0000200  /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2      0x0000600  /* device supports hw statistics version 2 */
+#define DEV_HAS_STATISTICS_V3      0x0000e00  /* device supports hw statistics version 3 */
+#define DEV_HAS_TEST_EXTENDED      0x0001000  /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT          0x0002000  /* device supports management unit */
+#define DEV_HAS_CORRECT_MACADDR    0x0004000  /* device supports correct mac address order */
+#define DEV_HAS_COLLISION_FIX      0x0008000  /* device supports tx collision fix */
+#define DEV_HAS_PAUSEFRAME_TX_V1   0x0010000  /* device supports tx pause frames version 1 */
+#define DEV_HAS_PAUSEFRAME_TX_V2   0x0020000  /* device supports tx pause frames version 2 */
+#define DEV_HAS_PAUSEFRAME_TX_V3   0x0040000  /* device supports tx pause frames version 3 */
+#define DEV_NEED_TX_LIMIT          0x0080000  /* device needs to limit tx */
+#define DEV_NEED_TX_LIMIT2         0x0180000  /* device needs to limit tx, expect for some revs */
+#define DEV_HAS_GEAR_MODE          0x0200000  /* device supports gear mode */
+#define DEV_NEED_PHY_INIT_FIX      0x0400000  /* device needs specific phy workaround */
+#define DEV_NEED_LOW_POWER_FIX     0x0800000  /* device needs special power up workaround */
+#define DEV_NEED_MSI_FIX           0x1000000  /* device needs msi workaround */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -343,6 +347,7 @@ enum {
 #define NVREG_POWERSTATE2_POWERUP_MASK		0x0F15
 #define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
 #define NVREG_POWERSTATE2_PHY_RESET		0x0004
+#define NVREG_POWERSTATE2_GATE_CLOCKS		0x0F00
 };
 
 /* Big endian: should work, but is untested */
@@ -1023,6 +1028,23 @@ static int using_multi_irqs(struct net_device *dev)
 		return 1;
 }
 
+static void nv_txrx_gate(struct net_device *dev, bool gate)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+	u32 powerstate;
+
+	if (!np->mac_in_use &&
+	    (np->driver_data & DEV_HAS_POWER_CNTRL)) {
+		powerstate = readl(base + NvRegPowerState2);
+		if (gate)
+			powerstate |= NVREG_POWERSTATE2_GATE_CLOCKS;
+		else
+			powerstate &= ~NVREG_POWERSTATE2_GATE_CLOCKS;
+		writel(powerstate, base + NvRegPowerState2);
+	}
+}
+
 static void nv_enable_irq(struct net_device *dev)
 {
 	struct fe_priv *np = get_nvpriv(dev);
@@ -1253,14 +1275,7 @@ static int phy_init(struct net_device *dev)
 			}
 		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
-			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+			if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
 				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
 				phy_reserved |= PHY_REALTEK_INIT7;
 				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
@@ -1451,14 +1466,7 @@ static int phy_init(struct net_device *dev)
 			}
 		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
-			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+			if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
 				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
 				phy_reserved |= PHY_REALTEK_INIT7;
 				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
@@ -3403,12 +3411,14 @@ static void nv_linkchange(struct net_device *dev)
 		if (!netif_carrier_ok(dev)) {
 			netif_carrier_on(dev);
 			printk(KERN_INFO "%s: link up.\n", dev->name);
+			nv_txrx_gate(dev, false);
 			nv_start_rx(dev);
 		}
 	} else {
 		if (netif_carrier_ok(dev)) {
 			netif_carrier_off(dev);
 			printk(KERN_INFO "%s: link down.\n", dev->name);
+			nv_txrx_gate(dev, true);
 			nv_stop_rx(dev);
 		}
 	}
@@ -5336,6 +5346,7 @@ static int nv_open(struct net_device *dev)
 	mii_rw(dev, np->phyaddr, MII_BMCR,
 	       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ) & ~BMCR_PDOWN);
 
+	nv_txrx_gate(dev, false);
 	/* erase previous misconfiguration */
 	if (np->driver_data & DEV_HAS_POWER_CNTRL)
 		nv_mac_reset(dev);
@@ -5523,12 +5534,14 @@ static int nv_close(struct net_device *dev)
 	nv_drain_rxtx(dev);
 
 	if (np->wolenabled || !phy_power_down) {
+		nv_txrx_gate(dev, false);
 		writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
 		nv_start_rx(dev);
 	} else {
 		/* power down phy */
 		mii_rw(dev, np->phyaddr, MII_BMCR,
 		       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ)|BMCR_PDOWN);
+		nv_txrx_gate(dev, true);
 	}
 
 	/* FIXME: power down nic */
@@ -5821,8 +5834,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		/* take phy and nic out of low power mode */
 		powerstate = readl(base + NvRegPowerState2);
 		powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
-		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
+		if ((id->driver_data & DEV_NEED_LOW_POWER_FIX) &&
 		    pci_dev->revision >= 0xA3)
 			powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
 		writel(powerstate, base + NvRegPowerState2);
@@ -5878,14 +5890,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	/* Limit the number of tx's outstanding for hw bug */
 	if (id->driver_data & DEV_NEED_TX_LIMIT) {
 		np->tx_limit = 1;
-		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_39) &&
+		if ((id->driver_data & DEV_NEED_TX_LIMIT2) &&
 		    pci_dev->revision >= 0xA2)
 			np->tx_limit = 0;
 	}
@@ -6135,7 +6140,8 @@ static int nv_resume(struct pci_dev *pdev)
 	for (i = 0;i <= np->register_size/sizeof(u32); i++)
 		writel(np->saved_config_space[i], base+i*sizeof(u32));
 
-	pci_write_config_dword(pdev, NV_MSI_PRIV_OFFSET, NV_MSI_PRIV_VALUE);
+	if (np->driver_data & DEV_NEED_MSI_FIX)
+		pci_write_config_dword(pdev, NV_MSI_PRIV_OFFSET, NV_MSI_PRIV_VALUE);
 
 	/* restore phy state, including autoneg */
 	phy_init(dev);
@@ -6184,160 +6190,164 @@ static void nv_shutdown(struct pci_dev *pdev)
 
 static struct pci_device_id pci_tbl[] = {
 	{	/* nForce Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1),
+		PCI_DEVICE(0x10DE, 0x01C3),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce2 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_2),
+		PCI_DEVICE(0x10DE, 0x0066),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_3),
+		PCI_DEVICE(0x10DE, 0x00D6),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4),
+		PCI_DEVICE(0x10DE, 0x0086),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5),
+		PCI_DEVICE(0x10DE, 0x008C),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6),
+		PCI_DEVICE(0x10DE, 0x00E6),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7),
+		PCI_DEVICE(0x10DE, 0x00DF),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* CK804 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8),
+		PCI_DEVICE(0x10DE, 0x0056),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* CK804 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9),
+		PCI_DEVICE(0x10DE, 0x0057),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* MCP04 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10),
+		PCI_DEVICE(0x10DE, 0x0037),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* MCP04 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11),
+		PCI_DEVICE(0x10DE, 0x0038),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* MCP51 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1,
+		PCI_DEVICE(0x10DE, 0x0268),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1|DEV_NEED_LOW_POWER_FIX,
 	},
 	{	/* MCP51 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1,
+		PCI_DEVICE(0x10DE, 0x0269),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1|DEV_NEED_LOW_POWER_FIX,
 	},
 	{	/* MCP55 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT,
+		PCI_DEVICE(0x10DE, 0x0372),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP55 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT,
+		PCI_DEVICE(0x10DE, 0x0373),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_16),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03E5),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_17),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03E6),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_18),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03EE),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_19),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03EF),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_20),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0450),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_21),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0451),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_22),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0452),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_23),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0453),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_24),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054C),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_25),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054D),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_26),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054E),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_27),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054F),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_28),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DC),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_29),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DD),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_30),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DE),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_31),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DF),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0760),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0761),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0762),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0763),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB0),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB1),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB2),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB3),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
+	},
+	{	/* MCP89 Ethernet Controller */
+		PCI_DEVICE(0x10DE, 0x0D7D),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX,
 	},
 	{0,},
 };
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index a9cbc3191a2..b892c3ad9a7 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -36,6 +36,8 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 
@@ -752,9 +754,10 @@ static int fs_init_phy(struct net_device *dev)
 	fep->oldlink = 0;
 	fep->oldspeed = 0;
 	fep->oldduplex = -1;
-	if(fep->fpi->bus_id)
-		phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0,
-				PHY_INTERFACE_MODE_MII);
+	if(fep->fpi->phy_node)
+		phydev = of_phy_connect(dev, fep->fpi->phy_node,
+					&fs_adjust_link, 0,
+					PHY_INTERFACE_MODE_MII);
 	else {
 		printk("No phy bus ID specified in BSP code\n");
 		return -EINVAL;
@@ -938,81 +941,6 @@ extern void fs_mii_disconnect(struct net_device *dev);
 
 /**************************************************************************************/
 
-/* handy pointer to the immap */
-void __iomem *fs_enet_immap = NULL;
-
-static int setup_immap(void)
-{
-#ifdef CONFIG_CPM1
-	fs_enet_immap = ioremap(IMAP_ADDR, 0x4000);
-	WARN_ON(!fs_enet_immap);
-#elif defined(CONFIG_CPM2)
-	fs_enet_immap = cpm2_immr;
-#endif
-
-	return 0;
-}
-
-static void cleanup_immap(void)
-{
-#if defined(CONFIG_CPM1)
-	iounmap(fs_enet_immap);
-#endif
-}
-
-/**************************************************************************************/
-
-static int __devinit find_phy(struct device_node *np,
-                              struct fs_platform_info *fpi)
-{
-	struct device_node *phynode, *mdionode;
-	int ret = 0, len, bus_id;
-	const u32 *data;
-
-	data  = of_get_property(np, "fixed-link", NULL);
-	if (data) {
-		snprintf(fpi->bus_id, 16, "%x:%02x", 0, *data);
-		return 0;
-	}
-
-	data = of_get_property(np, "phy-handle", &len);
-	if (!data || len != 4)
-		return -EINVAL;
-
-	phynode = of_find_node_by_phandle(*data);
-	if (!phynode)
-		return -EINVAL;
-
-	data = of_get_property(phynode, "reg", &len);
-	if (!data || len != 4) {
-		ret = -EINVAL;
-		goto out_put_phy;
-	}
-
-	mdionode = of_get_parent(phynode);
-	if (!mdionode) {
-		ret = -EINVAL;
-		goto out_put_phy;
-	}
-
-	bus_id = of_get_gpio(mdionode, 0);
-	if (bus_id < 0) {
-		struct resource res;
-		ret = of_address_to_resource(mdionode, 0, &res);
-		if (ret)
-			goto out_put_mdio;
-		bus_id = res.start;
-	}
-
-	snprintf(fpi->bus_id, 16, "%x:%02x", bus_id, *data);
-
-out_put_mdio:
-	of_node_put(mdionode);
-out_put_phy:
-	of_node_put(phynode);
-	return ret;
-}
-
 #ifdef CONFIG_FS_ENET_HAS_FEC
 #define IS_FEC(match) ((match)->data == &fs_fec_ops)
 #else
@@ -1062,9 +990,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
 	fpi->rx_copybreak = 240;
 	fpi->use_napi = 1;
 	fpi->napi_weight = 17;
-
-	ret = find_phy(ofdev->node, fpi);
-	if (ret)
+	fpi->phy_node = of_parse_phandle(ofdev->node, "phy-handle", 0);
+	if ((!fpi->phy_node) && (!of_get_property(ofdev->node, "fixed-link",
+						  NULL)))
 		goto out_free_fpi;
 
 	privsize = sizeof(*fep) +
@@ -1136,6 +1064,7 @@ out_cleanup_data:
 out_free_dev:
 	free_netdev(ndev);
 	dev_set_drvdata(&ofdev->dev, NULL);
+	of_node_put(fpi->phy_node);
 out_free_fpi:
 	kfree(fpi);
 	return ret;
@@ -1151,7 +1080,7 @@ static int fs_enet_remove(struct of_device *ofdev)
 	fep->ops->free_bd(ndev);
 	fep->ops->cleanup_data(ndev);
 	dev_set_drvdata(fep->dev, NULL);
-
+	of_node_put(fep->fpi->phy_node);
 	free_netdev(ndev);
 	return 0;
 }
@@ -1191,25 +1120,12 @@ static struct of_platform_driver fs_enet_driver = {
 
 static int __init fs_init(void)
 {
-	int r = setup_immap();
-	if (r != 0)
-		return r;
-
-	r = of_register_platform_driver(&fs_enet_driver);
-	if (r != 0)
-		goto out;
-
-	return 0;
-
-out:
-	cleanup_immap();
-	return r;
+	return of_register_platform_driver(&fs_enet_driver);
 }
 
 static void __exit fs_cleanup(void)
 {
 	of_unregister_platform_driver(&fs_enet_driver);
-	cleanup_immap();
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index 85a4bab7f63..ef01e09781a 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -194,9 +194,4 @@ extern const struct fs_ops fs_scc_ops;
 
 /*******************************************************************/
 
-/* handy pointer to the immap */
-extern void __iomem *fs_enet_immap;
-
-/*******************************************************************/
-
 #endif
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 14e575313c8..ca7bcb8ab3a 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -245,10 +245,6 @@ static void set_multicast_list(struct net_device *dev)
 
 static void restart(struct net_device *dev)
 {
-#ifdef CONFIG_DUET
-	immap_t *immap = fs_enet_immap;
-	u32 cptr;
-#endif
 	struct fs_enet_private *fep = netdev_priv(dev);
 	fec_t __iomem *fecp = fep->fec.fecp;
 	const struct fs_platform_info *fpi = fep->fpi;
@@ -315,36 +311,6 @@ static void restart(struct net_device *dev)
 	FW(fecp, ievent, 0xffc0);
 	FW(fecp, ivec, (virq_to_hw(fep->interrupt) / 2) << 29);
 
-	/*
-	 * adjust to speed (only for DUET & RMII)
-	 */
-#ifdef CONFIG_DUET
-	if (fpi->use_rmii) {
-		cptr = in_be32(&immap->im_cpm.cp_cptr);
-		switch (fs_get_fec_index(fpi->fs_no)) {
-		case 0:
-			cptr |= 0x100;
-			if (fep->speed == 10)
-				cptr |= 0x0000010;
-			else if (fep->speed == 100)
-				cptr &= ~0x0000010;
-			break;
-		case 1:
-			cptr |= 0x80;
-			if (fep->speed == 10)
-				cptr |= 0x0000008;
-			else if (fep->speed == 100)
-				cptr &= ~0x0000008;
-			break;
-		default:
-			BUG();	/* should never happen */
-			break;
-		}
-		out_be32(&immap->im_cpm.cp_cptr, cptr);
-	}
-#endif
-
-
 	FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE);	/* MII enable */
 	/*
 	 * adjust to duplex mode
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 49b6645d7e0..93b481b0e3c 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -22,6 +22,7 @@
 #include <linux/mii.h>
 #include <linux/platform_device.h>
 #include <linux/mdio-bitbang.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include "fs_enet.h"
@@ -149,31 +150,12 @@ static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
 	return 0;
 }
 
-static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
-{
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	bus->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq != NO_IRQ)
-		bus->irq[id] = irq;
-}
-
 static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-	struct device_node *np = NULL;
 	struct mii_bus *new_bus;
 	struct bb_info *bitbang;
 	int ret = -ENOMEM;
-	int i;
 
 	bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
 	if (!bitbang)
@@ -196,17 +178,10 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	if (!new_bus->irq)
 		goto out_unmap_regs;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = -1;
-
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(new_bus, np);
-
 	new_bus->parent = &ofdev->dev;
 	dev_set_drvdata(&ofdev->dev, new_bus);
 
-	ret = mdiobus_register(new_bus);
+	ret = of_mdiobus_register(new_bus, ofdev->node);
 	if (ret)
 		goto out_free_irqs;
 
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 28077cc1b94..75a09994d66 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -54,8 +54,7 @@ static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location)
 	fec_t __iomem *fecp = fec->fecp;
 	int i, ret = -1;
 
-	if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
-		BUG();
+	BUG_ON((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0);
 
 	/* Add PHY address to register command.  */
 	out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_read(location));
@@ -79,8 +78,7 @@ static int fs_enet_fec_mii_write(struct mii_bus *bus, int phy_id, int location,
 	int i;
 
 	/* this must never happen */
-	if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
-		BUG();
+	BUG_ON((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0);
 
 	/* Add PHY address to register command.  */
 	out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_write(location, val));
@@ -102,23 +100,6 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 	return 0;
 }
 
-static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
-{
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	bus->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq != NO_IRQ)
-		bus->irq[id] = irq;
-}
-
 static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
@@ -165,17 +146,10 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	if (!new_bus->irq)
 		goto out_unmap_regs;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = -1;
-
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(new_bus, np);
-
 	new_bus->parent = &ofdev->dev;
 	dev_set_drvdata(&ofdev->dev, new_bus);
 
-	ret = mdiobus_register(new_bus);
+	ret = of_mdiobus_register(new_bus, ofdev->node);
 	if (ret)
 		goto out_free_irqs;
 
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index aa1eb88c21f..3af581303ca 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -34,6 +34,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/of.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
@@ -154,44 +155,6 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
-/* Allocate an array which provides irq #s for each PHY on the given bus */
-static int *create_irq_map(struct device_node *np)
-{
-	int *irqs;
-	int i;
-	struct device_node *child = NULL;
-
-	irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
-
-	if (!irqs)
-		return NULL;
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		irqs[i] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		const u32 *id;
-
-		if (irq == NO_IRQ)
-			continue;
-
-		id = of_get_property(child, "reg", NULL);
-
-		if (!id)
-			continue;
-
-		if (*id < PHY_MAX_ADDR && *id >= 0)
-			irqs[*id] = irq;
-		else
-			printk(KERN_WARNING "%s: "
-					"%d is not a valid PHY address\n",
-					np->full_name, *id);
-	}
-
-	return irqs;
-}
-
 void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
 {
 	const u32 *addr;
@@ -315,7 +278,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 
 	new_bus->priv = (void __force *)regs;
 
-	new_bus->irq = create_irq_map(np);
+	new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
 
 	if (NULL == new_bus->irq) {
 		err = -ENOMEM;
@@ -338,13 +301,17 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 			of_device_is_compatible(np, "ucc_geth_phy")) {
 #ifdef CONFIG_UCC_GETH
 		u32 id;
+		static u32 mii_mng_master;
 
 		tbipa = &regs->utbipar;
 
 		if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
 			goto err_free_irqs;
 
-		ucc_set_qe_mux_mii_mng(id - 1);
+		if (!mii_mng_master) {
+			mii_mng_master = id;
+			ucc_set_qe_mux_mii_mng(id - 1);
+		}
 #else
 		err = -ENODEV;
 		goto err_free_irqs;
@@ -384,15 +351,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 
 	out_be32(tbipa, tbiaddr);
 
-	/*
-	 * The TBIPHY-only buses will find PHYs at every address,
-	 * so we mask them all but the TBI
-	 */
-	if (of_device_is_compatible(np, "fsl,gianfar-tbi"))
-		new_bus->phy_mask = ~(1 << tbiaddr);
-
-	err = mdiobus_register(new_bus);
-
+	err = of_mdiobus_register(new_bus, np);
 	if (err) {
 		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
 				new_bus->name);
@@ -460,10 +419,10 @@ int __init fsl_pq_mdio_init(void)
 {
 	return of_register_platform_driver(&fsl_pq_mdio_driver);
 }
+module_init(fsl_pq_mdio_init);
 
 void fsl_pq_mdio_exit(void)
 {
 	of_unregister_platform_driver(&fsl_pq_mdio_driver);
 }
-subsys_initcall_sync(fsl_pq_mdio_init);
 module_exit(fsl_pq_mdio_exit);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index a0519184e54..4ae1d259fce 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -75,6 +75,7 @@
 #include <linux/if_vlan.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
@@ -168,17 +169,13 @@ static inline int gfar_uses_fcb(struct gfar_private *priv)
 
 static int gfar_of_init(struct net_device *dev)
 {
-	struct device_node *phy, *mdio;
-	const unsigned int *id;
 	const char *model;
 	const char *ctype;
 	const void *mac_addr;
-	const phandle *ph;
 	u64 addr, size;
 	int err = 0;
 	struct gfar_private *priv = netdev_priv(dev);
 	struct device_node *np = priv->node;
-	char bus_name[MII_BUS_ID_SIZE];
 	const u32 *stash;
 	const u32 *stash_len;
 	const u32 *stash_idx;
@@ -264,8 +261,8 @@ static int gfar_of_init(struct net_device *dev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
 
-	ph = of_get_property(np, "phy-handle", NULL);
-	if (ph == NULL) {
+	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
+	if (!priv->phy_node) {
 		u32 *fixed_link;
 
 		fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
@@ -273,57 +270,10 @@ static int gfar_of_init(struct net_device *dev)
 			err = -ENODEV;
 			goto err_out;
 		}
-
-		snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id),
-				PHY_ID_FMT, "0", fixed_link[0]);
-	} else {
-		phy = of_find_node_by_phandle(*ph);
-
-		if (phy == NULL) {
-			err = -ENODEV;
-			goto err_out;
-		}
-
-		mdio = of_get_parent(phy);
-
-		id = of_get_property(phy, "reg", NULL);
-
-		of_node_put(phy);
-
-		fsl_pq_mdio_bus_name(bus_name, mdio);
-		of_node_put(mdio);
-		snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id), "%s:%02x",
-				bus_name, *id);
 	}
 
 	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
-	ph = of_get_property(np, "tbi-handle", NULL);
-	if (ph) {
-		struct device_node *tbi = of_find_node_by_phandle(*ph);
-		struct of_device *ofdev;
-		struct mii_bus *bus;
-
-		if (!tbi)
-			return 0;
-
-		mdio = of_get_parent(tbi);
-		if (!mdio)
-			return 0;
-
-		ofdev = of_find_device_by_node(mdio);
-
-		of_node_put(mdio);
-
-		id = of_get_property(tbi, "reg", NULL);
-		if (!id)
-			return 0;
-
-		of_node_put(tbi);
-
-		bus = dev_get_drvdata(&ofdev->dev);
-
-		priv->tbiphy = bus->phy_map[*id];
-	}
+	priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
 
 	return 0;
 
@@ -529,6 +479,10 @@ static int gfar_probe(struct of_device *ofdev,
 register_fail:
 	iounmap(priv->regs);
 regs_fail:
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	if (priv->tbi_node)
+		of_node_put(priv->tbi_node);
 	free_netdev(dev);
 	return err;
 }
@@ -537,6 +491,11 @@ static int gfar_remove(struct of_device *ofdev)
 {
 	struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
 
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	if (priv->tbi_node)
+		of_node_put(priv->tbi_node);
+
 	dev_set_drvdata(&ofdev->dev, NULL);
 
 	iounmap(priv->regs);
@@ -690,7 +649,6 @@ static int init_phy(struct net_device *dev)
 	uint gigabit_support =
 		priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
 		SUPPORTED_1000baseT_Full : 0;
-	struct phy_device *phydev;
 	phy_interface_t interface;
 
 	priv->oldlink = 0;
@@ -699,21 +657,21 @@ static int init_phy(struct net_device *dev)
 
 	interface = gfar_get_interface(dev);
 
-	phydev = phy_connect(dev, priv->phy_bus_id, &adjust_link, 0, interface);
+	if (priv->phy_node) {
+		priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
+					      0, interface);
+		if (!priv->phydev) {
+			dev_err(&dev->dev, "error: Could not attach to PHY\n");
+			return -ENODEV;
+		}
+	}
 
 	if (interface == PHY_INTERFACE_MODE_SGMII)
 		gfar_configure_serdes(dev);
 
-	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
-	}
-
 	/* Remove any features not supported by the controller */
-	phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
-	phydev->advertising = phydev->supported;
-
-	priv->phydev = phydev;
+	priv->phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
+	priv->phydev->advertising = priv->phydev->supported;
 
 	return 0;
 }
@@ -730,10 +688,17 @@ static int init_phy(struct net_device *dev)
 static void gfar_configure_serdes(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct phy_device *tbiphy;
 
-	if (!priv->tbiphy) {
-		printk(KERN_WARNING "SGMII mode requires that the device "
-				"tree specify a tbi-handle\n");
+	if (!priv->tbi_node) {
+		dev_warn(&dev->dev, "error: SGMII mode requires that the "
+				    "device tree specify a tbi-handle\n");
+		return;
+	}
+
+	tbiphy = of_phy_find_device(priv->tbi_node);
+	if (!tbiphy) {
+		dev_err(&dev->dev, "error: Could not get TBI device\n");
 		return;
 	}
 
@@ -743,17 +708,17 @@ static void gfar_configure_serdes(struct net_device *dev)
 	 * everything for us?  Resetting it takes the link down and requires
 	 * several seconds for it to come back.
 	 */
-	if (phy_read(priv->tbiphy, MII_BMSR) & BMSR_LSTATUS)
+	if (phy_read(tbiphy, MII_BMSR) & BMSR_LSTATUS)
 		return;
 
 	/* Single clk mode, mii mode off(for serdes communication) */
-	phy_write(priv->tbiphy, MII_TBICON, TBICON_CLK_SELECT);
+	phy_write(tbiphy, MII_TBICON, TBICON_CLK_SELECT);
 
-	phy_write(priv->tbiphy, MII_ADVERTISE,
+	phy_write(tbiphy, MII_ADVERTISE,
 			ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
 			ADVERTISE_1000XPSE_ASYM);
 
-	phy_write(priv->tbiphy, MII_BMCR, BMCR_ANENABLE |
+	phy_write(tbiphy, MII_BMCR, BMCR_ANENABLE |
 			BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
 }
 
@@ -1242,7 +1207,8 @@ static int gfar_enet_open(struct net_device *dev)
 static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb)
 {
 	struct txfcb *fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN);
-	cacheable_memzero(fcb, GMAC_FCB_LEN);
+
+	memset(fcb, 0, GMAC_FCB_LEN);
 
 	return fcb;
 }
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index cf352961ae9..2cd94338b5d 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -779,7 +779,8 @@ struct gfar_private {
 	spinlock_t bflock;
 
 	phy_interface_t interface;
-	char	phy_bus_id[BUS_ID_SIZE];
+	struct device_node *phy_node;
+	struct device_node *tbi_node;
 	u32 device_flags;
 	unsigned char rx_csum_enable:1,
 		extended_hash:1,
@@ -793,7 +794,6 @@ struct gfar_private {
 
 	/* PHY stuff */
 	struct phy_device *phydev;
-	struct phy_device *tbiphy;
 	struct mii_bus *mii_bus;
 	int oldspeed;
 	int oldduplex;
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 310ee035067..9d5b62cb30f 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1163,7 +1163,7 @@ static void hamachi_tx_timeout(struct net_device *dev)
 	hmp->rx_ring[RX_RING_SIZE-1].status_n_length |= cpu_to_le32(DescEndRing);
 
 	/* Trigger an immediate transmit demand. */
-	dev->trans_start = jiffies;
+	dev->trans_start = jiffies; /* prevent tx timeout */
 	hmp->stats.tx_errors++;
 
 	/* Restart the chip's Tx/Rx processes . */
@@ -1280,7 +1280,7 @@ static int hamachi_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		status=readw(hmp->base + TxStatus);
 		if( !(status & 0x0001) || (status & 0x0002))
 			writew(0x0001, hmp->base + TxCmd);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Caution: the write order is important here, set the field
@@ -1364,7 +1364,6 @@ static int hamachi_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		hmp->tx_full = 1;
 		netif_stop_queue(dev);
 	}
-	dev->trans_start = jiffies;
 
 	if (hamachi_debug > 4) {
 		printk(KERN_DEBUG "%s: Hamachi transmit frame #%d queued in slot %d.\n",
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index bb78c11559c..5e4b7afd068 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -777,7 +777,7 @@ static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	}
 	if (bc->skb)
-		return -1;
+		return NETDEV_TX_LOCKED;
 	/* strip KISS byte */
 	if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
 		dev_kfree_skb(skb);
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index d509b371a56..5105548ad50 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -274,7 +274,7 @@ static int bpq_xmit(struct sk_buff *skb, struct net_device *dev)
 		if ((newskb = skb_realloc_headroom(skb, AX25_BPQ_HEADER_LEN)) == NULL) {
 			printk(KERN_WARNING "bpqether: out of memory\n");
 			kfree_skb(skb);
-			return -ENOMEM;
+			return NETDEV_TX_OK;
 		}
 
 		if (skb->sk != NULL)
@@ -294,7 +294,7 @@ static int bpq_xmit(struct sk_buff *skb, struct net_device *dev)
 	if ((dev = bpq_get_ether_dev(dev)) == NULL) {
 		dev->stats.tx_dropped++;
 		kfree_skb(skb);
-		return -ENODEV;
+		return NETDEV_TX_OK;
 	}
 
 	skb->protocol = ax25_type_trans(skb, dev);
diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c
index 61de56e45ee..d034f8ca63c 100644
--- a/drivers/net/hamradio/hdlcdrv.c
+++ b/drivers/net/hamradio/hdlcdrv.c
@@ -409,7 +409,7 @@ static int hdlcdrv_send_packet(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	}
 	if (sm->skb)
-		return -1;
+		return NETDEV_TX_LOCKED;
 	netif_stop_queue(dev);
 	sm->skb = skb;
 	return 0;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 032c0db4c41..fda2fc83e9a 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -531,7 +531,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!netif_running(dev))  {
 		printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (netif_queue_stopped(dev)) {
@@ -541,7 +541,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 		 */
 		if (time_before(jiffies, dev->trans_start + 20 * HZ)) {
 			/* 20 sec timeout not reached */
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 
 		printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index de3f49f991a..8feda9fe829 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2864,7 +2864,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
 	printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
 	       dev->base_addr);
 #endif
-	gendev->driver_data = dev;
+	dev_set_drvdata(gendev, dev);
 	return 0;
  out1:
 	free_netdev(dev);
@@ -2873,7 +2873,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
 
 static int __devexit hp100_eisa_remove (struct device *gendev)
 {
-	struct net_device *dev = gendev->driver_data;
+	struct net_device *dev = dev_get_drvdata(gendev);
 	cleanup_dev(dev);
 	return 0;
 }
diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c
index 2e802634d36..3e3528ade25 100644
--- a/drivers/net/hplance.c
+++ b/drivers/net/hplance.c
@@ -71,6 +71,19 @@ static struct dio_driver hplance_driver = {
 	.remove    = __devexit_p(hplance_remove_one),
 };
 
+static const struct net_device_ops hplance_netdev_ops = {
+	.ndo_open		= hplance_open,
+	.ndo_stop		= hplance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= lance_poll,
+#endif
+};
+
 /* Find all the HP Lance boards and initialise them... */
 static int __devinit hplance_init_one(struct dio_dev *d,
 				const struct dio_device_id *ent)
@@ -135,13 +148,7 @@ static void __init hplance_init(struct net_device *dev, struct dio_dev *d)
 
         /* Fill the dev fields */
         dev->base_addr = va;
-        dev->open = &hplance_open;
-        dev->stop = &hplance_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-        dev->poll_controller = lance_poll;
-#endif
-        dev->hard_start_xmit = &lance_start_xmit;
-        dev->set_multicast_list = &lance_set_multicast;
+        dev->netdev_ops = &hplance_netdev_ops;
         dev->dma = 0;
 
         for (i=0; i<6; i++) {
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 806533c831c..beb84213b67 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1484,7 +1484,7 @@ static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
  stop_queue:
 	netif_stop_queue(ndev);
 	DBG2(dev, "stopped TX queue" NL);
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 /* Tx lock BHs */
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index c25bc0bc0b2..448098d3b39 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -815,7 +815,7 @@ static int ibmlana_close(struct net_device *dev)
 static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	ibmlana_priv *priv = netdev_priv(dev);
-	int retval = 0, tmplen, addr;
+	int tmplen, addr;
 	unsigned long flags;
 	tda_t tda;
 	int baddr;
@@ -824,7 +824,6 @@ static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 	   the upper layer is in deep desperation and we simply ignore the frame. */
 
 	if (priv->txusedcnt >= TXBUFCNT) {
-		retval = -EIO;
 		dev->stats.tx_dropped++;
 		goto tx_done;
 	}
@@ -874,7 +873,7 @@ static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&priv->lock, flags);
 tx_done:
 	dev_kfree_skb(skb);
-	return retval;
+	return NETDEV_TX_OK;
 }
 
 /* switch receiver mode. */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 5c6315df86b..0995c438f28 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1203,6 +1203,20 @@ static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev)
 	return ret;
 }
 
+static const struct net_device_ops ibmveth_netdev_ops = {
+	.ndo_open		= ibmveth_open,
+	.ndo_stop		= ibmveth_close,
+	.ndo_start_xmit		= ibmveth_start_xmit,
+	.ndo_set_multicast_list	= ibmveth_set_multicast_list,
+	.ndo_do_ioctl		= ibmveth_ioctl,
+	.ndo_change_mtu		= ibmveth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ibmveth_poll_controller,
+#endif
+};
+
 static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 {
 	int rc, i;
@@ -1241,7 +1255,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
 		return -ENOMEM;
 
 	adapter = netdev_priv(netdev);
-	dev->dev.driver_data = netdev;
+	dev_set_drvdata(&dev->dev, netdev);
 
 	adapter->vdev = dev;
 	adapter->netdev = netdev;
@@ -1265,21 +1279,13 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
 	memcpy(&adapter->mac_addr, mac_addr_p, 6);
 
 	netdev->irq = dev->irq;
-	netdev->open               = ibmveth_open;
-	netdev->stop               = ibmveth_close;
-	netdev->hard_start_xmit    = ibmveth_start_xmit;
-	netdev->set_multicast_list = ibmveth_set_multicast_list;
-	netdev->do_ioctl           = ibmveth_ioctl;
-	netdev->ethtool_ops           = &netdev_ethtool_ops;
-	netdev->change_mtu         = ibmveth_change_mtu;
+	netdev->netdev_ops = &ibmveth_netdev_ops;
+	netdev->ethtool_ops = &netdev_ethtool_ops;
 	SET_NETDEV_DEV(netdev, &dev->dev);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	netdev->poll_controller = ibmveth_poll_controller;
-#endif
  	netdev->features |= NETIF_F_LLTX;
 	spin_lock_init(&adapter->stats_lock);
 
-	memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
+	memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
 
 	for(i = 0; i<IbmVethNumBufferPools; i++) {
 		struct kobject *kobj = &adapter->rx_buff_pool[i].kobj;
@@ -1335,7 +1341,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
 
 static int __devexit ibmveth_remove(struct vio_dev *dev)
 {
-	struct net_device *netdev = dev->dev.driver_data;
+	struct net_device *netdev = dev_get_drvdata(&dev->dev);
 	struct ibmveth_adapter *adapter = netdev_priv(netdev);
 	int i;
 
@@ -1368,8 +1374,8 @@ static void ibmveth_proc_unregister_driver(void)
 static int ibmveth_show(struct seq_file *seq, void *v)
 {
 	struct ibmveth_adapter *adapter = seq->private;
-	char *current_mac = ((char*) &adapter->netdev->dev_addr);
-	char *firmware_mac = ((char*) &adapter->mac_addr) ;
+	char *current_mac = (char *) adapter->netdev->dev_addr;
+	char *firmware_mac = (char *) &adapter->mac_addr;
 
 	seq_printf(seq, "%s %s\n\n", ibmveth_driver_string, ibmveth_driver_version);
 
@@ -1468,8 +1474,8 @@ const char * buf, size_t count)
 	struct ibmveth_buff_pool *pool = container_of(kobj,
 						      struct ibmveth_buff_pool,
 						      kobj);
-	struct net_device *netdev =
-	    container_of(kobj->parent, struct device, kobj)->driver_data;
+	struct net_device *netdev = dev_get_drvdata(
+	    container_of(kobj->parent, struct device, kobj));
 	struct ibmveth_adapter *adapter = netdev_priv(netdev);
 	long value = simple_strtol(buf, NULL, 10);
 	long rc;
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 60a26300193..96713ef0629 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -156,6 +156,7 @@ static void ifb_setup(struct net_device *dev)
 
 	dev->flags |= IFF_NOARP;
 	dev->flags &= ~IFF_MULTICAST;
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 	random_ether_addr(dev->dev_addr);
 }
 
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index eaf97705036..0f16abab256 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -130,6 +130,7 @@ struct e1000_adv_tx_context_desc {
 #define E1000_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
 #define E1000_ADVTXD_TUCMD_IPV4    0x00000400  /* IP Packet Type: 1=IPv4 */
 #define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800  /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
 /* IPSec Encrypt Enable for ESP */
 #define E1000_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
 #define E1000_ADVTXD_MSS_SHIFT      16  /* Adv ctxt MSS shift */
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index ad2d319d0f8..3bda3db73f1 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -289,8 +289,9 @@
 #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
 
 /* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
 #define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
+#define E1000_RXCSUM_CRCOFL    0x00000800   /* CRC32 offload enable */
 #define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
 
 /* Header split receive */
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index 840782fb573..ed9058eca45 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -140,13 +140,13 @@ static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
 	struct e1000_mbx_info *mbx = &hw->mbx;
 	int countdown = mbx->timeout;
 
-	if (!mbx->ops.check_for_msg)
+	if (!countdown || !mbx->ops.check_for_msg)
 		goto out;
 
 	while (mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
 		if (!countdown)
 			break;
-		countdown--;
 		udelay(mbx->usec_delay);
 	}
 out:
@@ -165,13 +165,13 @@ static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
 	struct e1000_mbx_info *mbx = &hw->mbx;
 	int countdown = mbx->timeout;
 
-	if (!mbx->ops.check_for_ack)
+	if (!countdown || !mbx->ops.check_for_ack)
 		goto out;
 
 	while (mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
 		if (!countdown)
 			break;
-		countdown--;
 		udelay(mbx->usec_delay);
 	}
 out:
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
index 3228a862031..ebe4b616db8 100644
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/igb/e1000_phy.h
@@ -80,7 +80,7 @@ s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
 #define IGP02E1000_PM_D3_LPLU             0x0004 /* For all other states */
 #define IGP01E1000_PLHR_SS_DOWNGRADE      0x8000
 #define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-#define IGP01E1000_PSSR_MDIX              0x0008
+#define IGP01E1000_PSSR_MDIX              0x0800
 #define IGP01E1000_PSSR_SPEED_MASK        0xC000
 #define IGP01E1000_PSSR_SPEED_1000MBPS    0xC000
 #define IGP02E1000_PHY_CHANNEL_NUM        4
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 0bd7728fe46..6e5924511e4 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -142,6 +142,7 @@ enum {
 #define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
 #define E1000_ETQF(_n)  (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
 
+#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
 /* Split and Replication RX Control - RW */
 /*
  * Convenience macros
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 4e8464b9df2..b2c98dea9ee 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -137,11 +137,17 @@ struct igb_buffer {
 	};
 };
 
-struct igb_queue_stats {
+struct igb_tx_queue_stats {
 	u64 packets;
 	u64 bytes;
 };
 
+struct igb_rx_queue_stats {
+	u64 packets;
+	u64 bytes;
+	u64 drops;
+};
+
 struct igb_ring {
 	struct igb_adapter *adapter; /* backlink */
 	void *desc;                  /* descriptor ring memory */
@@ -167,12 +173,13 @@ struct igb_ring {
 	union {
 		/* TX */
 		struct {
-			struct igb_queue_stats tx_stats;
+			struct igb_tx_queue_stats tx_stats;
 			bool detect_tx_hung;
 		};
 		/* RX */
 		struct {
-			struct igb_queue_stats rx_stats;
+			struct igb_rx_queue_stats rx_stats;
+			u64 rx_queue_drops;
 			struct napi_struct napi;
 			int set_itr;
 			struct igb_ring *buddy;
@@ -238,7 +245,6 @@ struct igb_adapter {
 	u64 hw_csum_err;
 	u64 hw_csum_good;
 	u32 alloc_rx_buff_failed;
-	bool rx_csum;
 	u32 gorc;
 	u64 gorc_old;
 	u16 rx_ps_hdr_size;
@@ -286,6 +292,7 @@ struct igb_adapter {
 #define IGB_FLAG_DCA_ENABLED       (1 << 1)
 #define IGB_FLAG_QUAD_PORT_A       (1 << 2)
 #define IGB_FLAG_NEED_CTX_IDX      (1 << 3)
+#define IGB_FLAG_RX_CSUM_DISABLED  (1 << 4)
 
 enum e1000_state_t {
 	__IGB_TESTING,
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 27eae49e79c..9598ac09f4b 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -64,6 +64,7 @@ static const struct igb_stats igb_gstrings_stats[] = {
 	{ "rx_crc_errors", IGB_STAT(stats.crcerrs) },
 	{ "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", IGB_STAT(stats.rnbc) },
+	{ "rx_queue_drop_packet_count", IGB_STAT(net_stats.rx_fifo_errors) },
 	{ "rx_missed_errors", IGB_STAT(stats.mpc) },
 	{ "tx_aborted_errors", IGB_STAT(stats.ecol) },
 	{ "tx_carrier_errors", IGB_STAT(stats.tncrs) },
@@ -96,9 +97,10 @@ static const struct igb_stats igb_gstrings_stats[] = {
 };
 
 #define IGB_QUEUE_STATS_LEN \
-	((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues + \
-	 ((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues) * \
-	(sizeof(struct igb_queue_stats) / sizeof(u64)))
+	(((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues)* \
+	  (sizeof(struct igb_rx_queue_stats) / sizeof(u64))) + \
+	 ((((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues) * \
+	  (sizeof(struct igb_tx_queue_stats) / sizeof(u64))))
 #define IGB_GLOBAL_STATS_LEN	\
 	sizeof(igb_gstrings_stats) / sizeof(struct igb_stats)
 #define IGB_STATS_LEN (IGB_GLOBAL_STATS_LEN + IGB_QUEUE_STATS_LEN)
@@ -275,13 +277,17 @@ static int igb_set_pauseparam(struct net_device *netdev,
 static u32 igb_get_rx_csum(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	return adapter->rx_csum;
+	return !(adapter->flags & IGB_FLAG_RX_CSUM_DISABLED);
 }
 
 static int igb_set_rx_csum(struct net_device *netdev, u32 data)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	adapter->rx_csum = data;
+
+	if (data)
+		adapter->flags &= ~IGB_FLAG_RX_CSUM_DISABLED;
+	else
+		adapter->flags |= IGB_FLAG_RX_CSUM_DISABLED;
 
 	return 0;
 }
@@ -293,10 +299,16 @@ static u32 igb_get_tx_csum(struct net_device *netdev)
 
 static int igb_set_tx_csum(struct net_device *netdev, u32 data)
 {
-	if (data)
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if (data) {
 		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-	else
-		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+		if (adapter->hw.mac.type == e1000_82576)
+			netdev->features |= NETIF_F_SCTP_CSUM;
+	} else {
+		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		                      NETIF_F_SCTP_CSUM);
+	}
 
 	return 0;
 }
@@ -1950,7 +1962,8 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	u64 *queue_stat;
-	int stat_count = sizeof(struct igb_queue_stats) / sizeof(u64);
+	int stat_count_tx = sizeof(struct igb_tx_queue_stats) / sizeof(u64);
+	int stat_count_rx = sizeof(struct igb_rx_queue_stats) / sizeof(u64);
 	int j;
 	int i;
 
@@ -1963,14 +1976,14 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 	for (j = 0; j < adapter->num_tx_queues; j++) {
 		int k;
 		queue_stat = (u64 *)&adapter->tx_ring[j].tx_stats;
-		for (k = 0; k < stat_count; k++)
+		for (k = 0; k < stat_count_tx; k++)
 			data[i + k] = queue_stat[k];
 		i += k;
 	}
 	for (j = 0; j < adapter->num_rx_queues; j++) {
 		int k;
 		queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats;
-		for (k = 0; k < stat_count; k++)
+		for (k = 0; k < stat_count_rx; k++)
 			data[i + k] = queue_stat[k];
 		i += k;
 	}
@@ -2004,6 +2017,8 @@ static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
 			p += ETH_GSTRING_LEN;
 			sprintf(p, "rx_queue_%u_bytes", i);
 			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_drops", i);
+			p += ETH_GSTRING_LEN;
 		}
 /*		BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
 		break;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e25343588fc..ea17319624a 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -942,6 +942,8 @@ int igb_up(struct igb_adapter *adapter)
 	rd32(E1000_ICR);
 	igb_irq_enable(adapter);
 
+	netif_tx_start_all_queues(adapter->netdev);
+
 	/* Fire a link change interrupt to start the watchdog. */
 	wr32(E1000_ICS, E1000_ICS_LSC);
 	return 0;
@@ -994,6 +996,11 @@ void igb_down(struct igb_adapter *adapter)
 		igb_reset(adapter);
 	igb_clean_all_tx_rings(adapter);
 	igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+	/* since we reset the hardware DCA settings were cleared */
+	igb_setup_dca(adapter);
+#endif
 }
 
 void igb_reinit_locked(struct igb_adapter *adapter)
@@ -1343,6 +1350,9 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
+	if (adapter->hw.mac.type == e1000_82576)
+		netdev->features |= NETIF_F_SCTP_CSUM;
+
 	adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
 
 	/* before reading the NVM, reset the controller to put the device in a
@@ -1390,8 +1400,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
 	igb_validate_mdi_setting(hw);
 
-	adapter->rx_csum = 1;
-
 	/* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
 	 * enable the ACPI Magic Packet filter
 	 */
@@ -1442,22 +1450,18 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	 * driver. */
 	igb_get_hw_control(adapter);
 
-	/* tell the stack to leave us alone until igb_open() is called */
-	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
 #ifdef CONFIG_IGB_DCA
 	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IGB_FLAG_DCA_ENABLED;
 		dev_info(&pdev->dev, "DCA enabled\n");
-		/* Always use CB2 mode, difference is masked
-		 * in the CB driver. */
-		wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 		igb_setup_dca(adapter);
 	}
 #endif
@@ -1699,6 +1703,8 @@ static int igb_open(struct net_device *netdev)
 	if (test_bit(__IGB_TESTING, &adapter->state))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = igb_setup_all_tx_resources(adapter);
 	if (err)
@@ -2231,29 +2237,24 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 		mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
 			 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
 
-
 		wr32(E1000_MRQC, mrqc);
-
-		/* Multiqueue and raw packet checksumming are mutually
-		 * exclusive.  Note that this not the same as TCP/IP
-		 * checksumming, which works fine. */
-		rxcsum = rd32(E1000_RXCSUM);
-		rxcsum |= E1000_RXCSUM_PCSD;
-		wr32(E1000_RXCSUM, rxcsum);
-	} else {
+	} else if (adapter->vfs_allocated_count) {
 		/* Enable multi-queue for sr-iov */
-		if (adapter->vfs_allocated_count)
-			wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
-		/* Enable Receive Checksum Offload for TCP and UDP */
-		rxcsum = rd32(E1000_RXCSUM);
-		if (adapter->rx_csum)
-			rxcsum |= E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPPCSE;
-		else
-			rxcsum &= ~(E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPPCSE);
-
-		wr32(E1000_RXCSUM, rxcsum);
+		wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
 	}
 
+	/* Enable Receive Checksum Offload for TCP and UDP */
+	rxcsum = rd32(E1000_RXCSUM);
+	/* Disable raw packet checksumming */
+	rxcsum |= E1000_RXCSUM_PCSD;
+
+	if (adapter->hw.mac.type == e1000_82576)
+		/* Enable Receive Checksum Offload for SCTP */
+		rxcsum |= E1000_RXCSUM_CRCOFL;
+
+	/* Don't need to set TUOFL or IPOFL, they default to 1 */
+	wr32(E1000_RXCSUM, rxcsum);
+
 	/* Set the default pool for the PF's first queue */
 	igb_configure_vt_default_pool(adapter);
 
@@ -2661,7 +2662,6 @@ static void igb_watchdog_task(struct work_struct *work)
 			}
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 
 			igb_ping_all_vfs(adapter);
 
@@ -2678,7 +2678,6 @@ static void igb_watchdog_task(struct work_struct *work)
 			printk(KERN_INFO "igb: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 
 			igb_ping_all_vfs(adapter);
 
@@ -2712,6 +2711,8 @@ link_up:
 			 * (Do the reset outside of interrupt context). */
 			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -2895,13 +2896,13 @@ static void igb_set_itr(struct igb_adapter *adapter)
 	switch (current_itr) {
 	/* counts and packets in update_itr are dependent on these numbers */
 	case lowest_latency:
-		new_itr = 70000;
+		new_itr = 56;  /* aka 70,000 ints/sec */
 		break;
 	case low_latency:
-		new_itr = 20000; /* aka hwitr = ~200 */
+		new_itr = 196; /* aka 20,000 ints/sec */
 		break;
 	case bulk_latency:
-		new_itr = 4000;
+		new_itr = 980; /* aka 4,000 ints/sec */
 		break;
 	default:
 		break;
@@ -2920,7 +2921,8 @@ set_itr_now:
 		 * by adding intermediate steps when interrupt rate is
 		 * increasing */
 		new_itr = new_itr > adapter->itr ?
-			     min(adapter->itr + (new_itr >> 2), new_itr) :
+			     max((new_itr * adapter->itr) /
+			         (new_itr + (adapter->itr >> 2)), new_itr) :
 			     new_itr;
 		/* Don't write the value here; it resets the adapter's
 		 * internal timer, and causes us to delay far longer than
@@ -2929,7 +2931,7 @@ set_itr_now:
 		 * ends up being correct.
 		 */
 		adapter->itr = new_itr;
-		adapter->rx_ring->itr_val = 1000000000 / (new_itr * 256);
+		adapter->rx_ring->itr_val = new_itr;
 		adapter->rx_ring->set_itr = 1;
 	}
 
@@ -3068,11 +3070,15 @@ static inline bool igb_tx_csum_adv(struct igb_adapter *adapter,
 				tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
 				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+				else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			case cpu_to_be16(ETH_P_IPV6):
 				/* XXX what about other V6 headers?? */
 				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+				else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			default:
 				if (unlikely(net_ratelimit()))
@@ -3133,8 +3139,7 @@ static inline int igb_tx_map_adv(struct igb_adapter *adapter,
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
-	buffer_info->dma = map[count];
-	count++;
+	buffer_info->dma = skb_shinfo(skb)->dma_head;
 
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
@@ -3158,7 +3163,7 @@ static inline int igb_tx_map_adv(struct igb_adapter *adapter,
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count;
+	return count + 1;
 }
 
 static inline void igb_tx_queue_adv(struct igb_adapter *adapter,
@@ -3338,7 +3343,6 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb,
 	if (count) {
 		igb_tx_queue_adv(adapter, tx_ring, tx_flags, count,
 			         skb->len, hdr_len);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4);
 	} else {
@@ -3582,8 +3586,35 @@ void igb_update_stats(struct igb_adapter *adapter)
 
 	/* Rx Errors */
 
+	if (hw->mac.type != e1000_82575) {
+		u32 rqdpc_tmp;
+		u64 rqdpc_total = 0;
+		int i;
+		/* Read out drops stats per RX queue.  Notice RQDPC (Receive
+		 * Queue Drop Packet Count) stats only gets incremented, if
+		 * the DROP_EN but it set (in the SRRCTL register for that
+		 * queue).  If DROP_EN bit is NOT set, then the some what
+		 * equivalent count is stored in RNBC (not per queue basis).
+		 * Also note the drop count is due to lack of available
+		 * descriptors.
+		 */
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0xFFF;
+			adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
+			rqdpc_total += adapter->rx_ring[i].rx_stats.drops;
+		}
+		adapter->net_stats.rx_fifo_errors = rqdpc_total;
+	}
+
+	/* Note RNBC (Receive No Buffers Count) is an not an exact
+	 * drop count as the hardware FIFO might save the day.  Thats
+	 * one of the reason for saving it in rx_fifo_errors, as its
+	 * potentially not a true drop.
+	 */
+	adapter->net_stats.rx_fifo_errors += adapter->stats.rnbc;
+
 	/* RLEC on some newer hardware can be incorrect so build
-	* our own version based on RUC and ROC */
+	 * our own version based on RUC and ROC */
 	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
@@ -3767,11 +3798,15 @@ static void igb_update_tx_dca(struct igb_ring *tx_ring)
 
 static void igb_setup_dca(struct igb_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	int i;
 
 	if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
 		return;
 
+	/* Always use CB2 mode, difference is masked in the CB driver. */
+	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		adapter->tx_ring[i].cpu = -1;
 		igb_update_tx_dca(&adapter->tx_ring[i]);
@@ -4434,20 +4469,12 @@ static void igb_receive_skb(struct igb_ring *ring, u8 status,
 	bool vlan_extracted = (adapter->vlgrp && (status & E1000_RXD_STAT_VP));
 
 	skb_record_rx_queue(skb, ring->queue_index);
-	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
-		if (vlan_extracted)
-			vlan_gro_receive(&ring->napi, adapter->vlgrp,
-			                 le16_to_cpu(rx_desc->wb.upper.vlan),
-			                 skb);
-		else
-			napi_gro_receive(&ring->napi, skb);
-	} else {
-		if (vlan_extracted)
-			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-			                  le16_to_cpu(rx_desc->wb.upper.vlan));
-		else
-			netif_receive_skb(skb);
-	}
+	if (vlan_extracted)
+		vlan_gro_receive(&ring->napi, adapter->vlgrp,
+		                 le16_to_cpu(rx_desc->wb.upper.vlan),
+		                 skb);
+	else
+		napi_gro_receive(&ring->napi, skb);
 }
 
 static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
@@ -4456,19 +4483,28 @@ static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
-	if ((status_err & E1000_RXD_STAT_IXSM) || !adapter->rx_csum)
+	if ((status_err & E1000_RXD_STAT_IXSM) ||
+	    (adapter->flags & IGB_FLAG_RX_CSUM_DISABLED))
 		return;
 	/* TCP/UDP checksum error bit is set */
 	if (status_err &
 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+		/*
+		 * work around errata with sctp packets where the TCPE aka
+		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+		 * packets, (aka let the stack check the crc32c)
+		 */
+		if (!((adapter->hw.mac.type == e1000_82576) &&
+		      (skb->len == 60)))
+			adapter->hw_csum_err++;
 		/* let the stack verify checksum errors */
-		adapter->hw_csum_err++;
 		return;
 	}
 	/* It must be a TCP or UDP packet with a valid checksum */
 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
+	dev_dbg(&adapter->pdev->dev, "cksum success: bits %08X\n", status_err);
 	adapter->hw_csum_good++;
 }
 
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index 1dcaa690531..ee17a097d1c 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -133,6 +133,24 @@ static int igbvf_set_pauseparam(struct net_device *netdev,
 	return -EOPNOTSUPP;
 }
 
+static u32 igbvf_get_rx_csum(struct net_device *netdev)
+{
+	struct igbvf_adapter *adapter = netdev_priv(netdev);
+	return !(adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED);
+}
+
+static int igbvf_set_rx_csum(struct net_device *netdev, u32 data)
+{
+	struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+	if (data)
+		adapter->flags &= ~IGBVF_FLAG_RX_CSUM_DISABLED;
+	else
+		adapter->flags |= IGBVF_FLAG_RX_CSUM_DISABLED;
+
+	return 0;
+}
+
 static u32 igbvf_get_tx_csum(struct net_device *netdev)
 {
 	return ((netdev->features & NETIF_F_IP_CSUM) != 0);
@@ -150,8 +168,6 @@ static int igbvf_set_tx_csum(struct net_device *netdev, u32 data)
 static int igbvf_set_tso(struct net_device *netdev, u32 data)
 {
 	struct igbvf_adapter *adapter = netdev_priv(netdev);
-	int i;
-	struct net_device *v_netdev;
 
 	if (data) {
 		netdev->features |= NETIF_F_TSO;
@@ -159,24 +175,10 @@ static int igbvf_set_tso(struct net_device *netdev, u32 data)
 	} else {
 		netdev->features &= ~NETIF_F_TSO;
 		netdev->features &= ~NETIF_F_TSO6;
-		/* disable TSO on all VLANs if they're present */
-		if (!adapter->vlgrp)
-			goto tso_out;
-		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
-			v_netdev = vlan_group_get_device(adapter->vlgrp, i);
-			if (!v_netdev)
-				continue;
-
-			v_netdev->features &= ~NETIF_F_TSO;
-			v_netdev->features &= ~NETIF_F_TSO6;
-			vlan_group_set_device(adapter->vlgrp, i, v_netdev);
-		}
 	}
 
-tso_out:
 	dev_info(&adapter->pdev->dev, "TSO is %s\n",
 	         data ? "Enabled" : "Disabled");
-	adapter->flags |= FLAG_TSO_FORCE;
 	return 0;
 }
 
@@ -517,6 +519,8 @@ static const struct ethtool_ops igbvf_ethtool_ops = {
 	.set_ringparam		= igbvf_set_ringparam,
 	.get_pauseparam		= igbvf_get_pauseparam,
 	.set_pauseparam		= igbvf_set_pauseparam,
+	.get_rx_csum            = igbvf_get_rx_csum,
+	.set_rx_csum            = igbvf_set_rx_csum,
 	.get_tx_csum		= igbvf_get_tx_csum,
 	.set_tx_csum		= igbvf_set_tx_csum,
 	.get_sg			= ethtool_op_get_sg,
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 4bff35e4687..8e9b67ebbf8 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -45,7 +45,7 @@ struct igbvf_adapter;
 /* Interrupt defines */
 #define IGBVF_START_ITR                 648 /* ~6000 ints/sec */
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define IGBVF_INT_MODE_LEGACY           0
 #define IGBVF_INT_MODE_MSI              1
 #define IGBVF_INT_MODE_MSIX             2
@@ -286,11 +286,7 @@ struct igbvf_info {
 };
 
 /* hardware capability, feature, and workaround flags */
-#define FLAG_HAS_HW_VLAN_FILTER           (1 << 0)
-#define FLAG_HAS_JUMBO_FRAMES             (1 << 1)
-#define FLAG_MSI_ENABLED                  (1 << 2)
-#define FLAG_RX_CSUM_ENABLED              (1 << 3)
-#define FLAG_TSO_FORCE                    (1 << 4)
+#define IGBVF_FLAG_RX_CSUM_DISABLED             (1 << 0)
 
 #define IGBVF_RX_DESC_ADV(R, i)     \
 	(&((((R).desc))[i].rx_desc))
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index b774666ad3c..22aadb7884f 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -58,8 +58,7 @@ static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
 
 static struct igbvf_info igbvf_vf_info = {
 	.mac                    = e1000_vfadapt,
-	.flags                  = FLAG_HAS_JUMBO_FRAMES
-	                          | FLAG_RX_CSUM_ENABLED,
+	.flags                  = 0,
 	.pba                    = 10,
 	.init_ops               = e1000_init_function_pointers_vf,
 };
@@ -107,8 +106,10 @@ static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
-	if ((status_err & E1000_RXD_STAT_IXSM))
+	if ((status_err & E1000_RXD_STAT_IXSM) ||
+	    (adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED))
 		return;
+
 	/* TCP/UDP checksum error bit is set */
 	if (status_err &
 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
@@ -116,6 +117,7 @@ static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
 		adapter->hw_csum_err++;
 		return;
 	}
+
 	/* It must be a TCP or UDP packet with a valid checksum */
 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2117,8 +2119,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
-	buffer_info->dma = map[count];
-	count++;
+	buffer_info->dma = skb_shinfo(skb)->dma_head;
 
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
@@ -2142,7 +2143,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count;
+	return count + 1;
 }
 
 static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
@@ -2268,7 +2269,6 @@ static int igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
 	if (count) {
 		igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count,
 		                   skb->len, hdr_len);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4);
 	} else {
@@ -2351,15 +2351,6 @@ static int igbvf_change_mtu(struct net_device *netdev, int new_mtu)
 		return -EINVAL;
 	}
 
-	/* Jumbo frame size limits */
-	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
-		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			dev_err(&adapter->pdev->dev,
-			        "Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-	}
-
 #define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
 		dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index c5593f4665a..e3cfefab670 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -530,7 +530,7 @@ static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
 	 *   case where the checksum is right the higher layers will still
 	 *   drop the packet as appropriate.
 	 */
-	if (eh->h_proto != ntohs(ETH_P_IP))
+	if (eh->h_proto != htons(ETH_P_IP))
 		return;
 
 	ih = (struct iphdr *) ((char *)eh + ETH_HLEN);
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index dd9318f1949..dfc2541bb55 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -514,7 +514,7 @@ enum ipg_regs {
 #define		IPG_DMALIST_ALIGN_PAD	0x07
 #define		IPG_MULTICAST_HASHTABLE_SIZE	0x40
 
-/* Number of miliseconds to wait after issuing a software reset.
+/* Number of milliseconds to wait after issuing a software reset.
  * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
  */
 #define         IPG_AC_RESETWAIT             0x05
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index e6317557a53..f7638422142 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -17,6 +17,51 @@ config IRTTY_SIR
 
 	  If unsure, say Y.
 
+config BFIN_SIR
+	tristate "Blackfin SIR on UART"
+	depends on BLACKFIN && IRDA
+	default n
+	help
+	  Say Y here if your want to enable SIR function on Blackfin UART
+	  devices.
+
+	  To activate this driver you can start irattach like:
+	  "irattach irda0 -s"
+
+	  Saying M, it will be built as a module named bfin_sir.
+
+	  Note that you need to turn off one of the serial drivers for SIR
+	  to use that UART.
+
+config BFIN_SIR0
+	bool "Blackfin SIR on UART0"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART0
+
+config BFIN_SIR1
+	bool "Blackfin SIR on UART1"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
+
+config BFIN_SIR2
+	bool "Blackfin SIR on UART2"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
+
+config BFIN_SIR3
+	bool "Blackfin SIR on UART3"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
+
+choice
+	prompt "SIR Mode"
+	depends on BFIN_SIR
+	default SIR_BFIN_DMA
+
+config SIR_BFIN_DMA
+	bool "DMA mode"
+	depends on !DMA_UNCACHED_NONE
+
+config SIR_BFIN_PIO
+	bool "PIO mode"
+endchoice
+
 comment "Dongle support"
 
 config DONGLE
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 5d20fde32a2..d82e1e3bd8c 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
 obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
 # SIR drivers
 obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
+obj-$(CONFIG_BFIN_SIR)		+= bfin_sir.o
 # dongle drivers for SIR drivers
 obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
 obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram-sir.o
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 941164076a2..c4361d46659 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
@@ -198,6 +199,17 @@ static int au1k_irda_init_iobuf(iobuff_t *io, int size)
 	return io->head ? 0 : -ENOMEM;
 }
 
+static const struct net_device_ops au1k_irda_netdev_ops = {
+	.ndo_open		= au1k_irda_start,
+	.ndo_stop		= au1k_irda_stop,
+	.ndo_start_xmit		= au1k_irda_hard_xmit,
+	.ndo_tx_timeout		= au1k_tx_timeout,
+	.ndo_do_ioctl		= au1k_irda_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int au1k_irda_net_init(struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
@@ -209,11 +221,7 @@ static int au1k_irda_net_init(struct net_device *dev)
 	if (err)
 		goto out1;
 
-	dev->open = au1k_irda_start;
-	dev->hard_start_xmit = au1k_irda_hard_xmit;
-	dev->stop = au1k_irda_stop;
-	dev->do_ioctl = au1k_irda_ioctl;
-	dev->tx_timeout = au1k_tx_timeout;
+	dev->netdev_ops = &au1k_irda_netdev_ops;
 
 	irda_init_max_qos_capabilies(&aup->qos);
 
@@ -504,13 +512,13 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	pDB = aup->tx_db_inuse[aup->tx_head];
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
new file mode 100644
index 00000000000..f3eed6a8fba
--- /dev/null
+++ b/drivers/net/irda/bfin_sir.c
@@ -0,0 +1,820 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+#include "bfin_sir.h"
+
+#ifdef CONFIG_SIR_BFIN_DMA
+#define DMA_SIR_RX_XCNT        10
+#define DMA_SIR_RX_YCNT        (PAGE_SIZE / DMA_SIR_RX_XCNT)
+#define DMA_SIR_RX_FLUSH_JIFS  (HZ * 4 / 250)
+#endif
+
+#if ANOMALY_05000447
+static int max_rate = 57600;
+#else
+static int max_rate = 115200;
+#endif
+
+static void turnaround_delay(unsigned long last_jif, int mtt)
+{
+	long ticks;
+
+	mtt = mtt < 10000 ? 10000 : mtt;
+	ticks = 1 + mtt / (USEC_PER_SEC / HZ);
+	schedule_timeout_uninterruptible(ticks);
+}
+
+static void __devinit bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
+{
+	int i;
+	struct resource *res;
+
+	for (i = 0; i < pdev->num_resources; i++) {
+		res = &pdev->resource[i];
+		switch (res->flags) {
+		case IORESOURCE_MEM:
+			sp->membase   = (void __iomem *)res->start;
+			break;
+		case IORESOURCE_IRQ:
+			sp->irq = res->start;
+			break;
+		case IORESOURCE_DMA:
+			sp->rx_dma_channel = res->start;
+			sp->tx_dma_channel = res->end;
+			break;
+		default:
+			break;
+		}
+	}
+
+	sp->clk = get_sclk();
+#ifdef CONFIG_SIR_BFIN_DMA
+	sp->tx_done        = 1;
+	init_timer(&(sp->rx_dma_timer));
+#endif
+}
+
+static void bfin_sir_stop_tx(struct bfin_sir_port *port)
+{
+#ifdef CONFIG_SIR_BFIN_DMA
+	disable_dma(port->tx_dma_channel);
+#endif
+
+	while (!(SIR_UART_GET_LSR(port) & THRE)) {
+		cpu_relax();
+		continue;
+	}
+
+	SIR_UART_STOP_TX(port);
+}
+
+static void bfin_sir_enable_tx(struct bfin_sir_port *port)
+{
+	SIR_UART_ENABLE_TX(port);
+}
+
+static void bfin_sir_stop_rx(struct bfin_sir_port *port)
+{
+	SIR_UART_STOP_RX(port);
+}
+
+static void bfin_sir_enable_rx(struct bfin_sir_port *port)
+{
+	SIR_UART_ENABLE_RX(port);
+}
+
+static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
+{
+	int ret = -EINVAL;
+	unsigned int quot;
+	unsigned short val, lsr, lcr;
+	static int utime;
+	int count = 10;
+
+	lcr = WLS(8);
+
+	switch (speed) {
+	case 9600:
+	case 19200:
+	case 38400:
+	case 57600:
+	case 115200:
+
+		quot = (port->clk + (8 * speed)) / (16 * speed)\
+						- ANOMALY_05000230;
+
+		do {
+			udelay(utime);
+			lsr = SIR_UART_GET_LSR(port);
+		} while (!(lsr & TEMT) && count--);
+
+		/* The useconds for 1 bits to transmit */
+		utime = 1000000 / speed + 1;
+
+		/* Clear UCEN bit to reset the UART state machine
+		 * and control registers
+		 */
+		val = SIR_UART_GET_GCTL(port);
+		val &= ~UCEN;
+		SIR_UART_PUT_GCTL(port, val);
+
+		/* Set DLAB in LCR to Access THR RBR IER */
+		SIR_UART_SET_DLAB(port);
+		SSYNC();
+
+		SIR_UART_PUT_DLL(port, quot & 0xFF);
+		SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
+		SSYNC();
+
+		/* Clear DLAB in LCR */
+		SIR_UART_CLEAR_DLAB(port);
+		SSYNC();
+
+		SIR_UART_PUT_LCR(port, lcr);
+
+		val = SIR_UART_GET_GCTL(port);
+		val |= UCEN;
+		SIR_UART_PUT_GCTL(port, val);
+
+		ret = 0;
+		break;
+	default:
+		printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
+		break;
+	}
+
+	val = SIR_UART_GET_GCTL(port);
+	/* If not add the 'RPOLC', we can't catch the receive interrupt.
+	 * It's related with the HW layout and the IR transiver.
+	 */
+	val |= IREN | RPOLC;
+	SIR_UART_PUT_GCTL(port, val);
+	return ret;
+}
+
+static int bfin_sir_is_receiving(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	if (!(SIR_UART_GET_IER(port) & ERBFI))
+		return 0;
+	return self->rx_buff.state != OUTSIDE_FRAME;
+}
+
+#ifdef CONFIG_SIR_BFIN_PIO
+static void bfin_sir_tx_chars(struct net_device *dev)
+{
+	unsigned int chr;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	if (self->tx_buff.len != 0) {
+		chr = *(self->tx_buff.data);
+		SIR_UART_PUT_CHAR(port, chr);
+		self->tx_buff.data++;
+		self->tx_buff.len--;
+	} else {
+		self->stats.tx_packets++;
+		self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
+		if (self->newspeed) {
+			bfin_sir_set_speed(port, self->newspeed);
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_stop_tx(port);
+		bfin_sir_enable_rx(port);
+		/* I'm hungry! */
+		netif_wake_queue(dev);
+	}
+}
+
+static void bfin_sir_rx_chars(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	unsigned char ch;
+
+	SIR_UART_CLEAR_LSR(port);
+	ch = SIR_UART_GET_CHAR(port);
+	async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
+	dev->last_rx = jiffies;
+}
+
+static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	spin_lock(&self->lock);
+	while ((SIR_UART_GET_LSR(port) & DR))
+		bfin_sir_rx_chars(dev);
+	spin_unlock(&self->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	spin_lock(&self->lock);
+	if (SIR_UART_GET_LSR(port) & THRE)
+		bfin_sir_tx_chars(dev);
+	spin_unlock(&self->lock);
+
+	return IRQ_HANDLED;
+}
+#endif /* CONFIG_SIR_BFIN_PIO */
+
+#ifdef CONFIG_SIR_BFIN_DMA
+static void bfin_sir_dma_tx_chars(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	if (!port->tx_done)
+		return;
+	port->tx_done = 0;
+
+	if (self->tx_buff.len == 0) {
+		self->stats.tx_packets++;
+		if (self->newspeed) {
+			bfin_sir_set_speed(port, self->newspeed);
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_enable_rx(port);
+		port->tx_done = 1;
+		netif_wake_queue(dev);
+		return;
+	}
+
+	blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
+		(unsigned long)(self->tx_buff.data+self->tx_buff.len));
+	set_dma_config(port->tx_dma_channel,
+		set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
+			INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
+			DMA_SYNC_RESTART));
+	set_dma_start_addr(port->tx_dma_channel,
+		(unsigned long)(self->tx_buff.data));
+	set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
+	set_dma_x_modify(port->tx_dma_channel, 1);
+	enable_dma(port->tx_dma_channel);
+}
+
+static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	spin_lock(&self->lock);
+	if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
+		clear_dma_irqstat(port->tx_dma_channel);
+		bfin_sir_stop_tx(port);
+
+		self->stats.tx_packets++;
+		self->stats.tx_bytes += self->tx_buff.len;
+		self->tx_buff.len = 0;
+		if (self->newspeed) {
+			bfin_sir_set_speed(port, self->newspeed);
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_enable_rx(port);
+		/* I'm hungry! */
+		netif_wake_queue(dev);
+		port->tx_done = 1;
+	}
+	spin_unlock(&self->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void bfin_sir_dma_rx_chars(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int i;
+
+	SIR_UART_CLEAR_LSR(port);
+
+	for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
+		async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
+}
+
+void bfin_sir_rx_dma_timeout(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int x_pos, pos;
+	unsigned long flags;
+
+	spin_lock_irqsave(&self->lock, flags);
+	x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
+	if (x_pos == DMA_SIR_RX_XCNT)
+		x_pos = 0;
+
+	pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
+
+	if (pos > port->rx_dma_buf.tail) {
+		port->rx_dma_buf.tail = pos;
+		bfin_sir_dma_rx_chars(dev);
+		port->rx_dma_buf.head = port->rx_dma_buf.tail;
+	}
+	spin_unlock_irqrestore(&self->lock, flags);
+}
+
+static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	unsigned short irqstat;
+
+	spin_lock(&self->lock);
+
+	port->rx_dma_nrows++;
+	port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
+	bfin_sir_dma_rx_chars(dev);
+	if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
+		port->rx_dma_nrows = 0;
+		port->rx_dma_buf.tail = 0;
+	}
+	port->rx_dma_buf.head = port->rx_dma_buf.tail;
+
+	irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
+	clear_dma_irqstat(port->rx_dma_channel);
+	spin_unlock(&self->lock);
+
+	mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
+	return IRQ_HANDLED;
+}
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
+{
+#ifdef CONFIG_SIR_BFIN_DMA
+	dma_addr_t dma_handle;
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+	if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
+		dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
+		return -EBUSY;
+	}
+
+	if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
+		dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
+		free_dma(port->rx_dma_channel);
+		return -EBUSY;
+	}
+
+#ifdef CONFIG_SIR_BFIN_DMA
+
+	set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
+	set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
+
+	port->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
+	port->rx_dma_buf.head = 0;
+	port->rx_dma_buf.tail = 0;
+	port->rx_dma_nrows = 0;
+
+	set_dma_config(port->rx_dma_channel,
+				set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
+									INTR_ON_ROW, DIMENSION_2D,
+									DATA_SIZE_8, DMA_SYNC_RESTART));
+	set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
+	set_dma_x_modify(port->rx_dma_channel, 1);
+	set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
+	set_dma_y_modify(port->rx_dma_channel, 1);
+	set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
+	enable_dma(port->rx_dma_channel);
+
+	port->rx_dma_timer.data = (unsigned long)(dev);
+	port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout;
+
+#else
+
+	if (request_irq(port->irq, bfin_sir_rx_int, IRQF_DISABLED, "BFIN_SIR_RX", dev)) {
+		dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
+		return -EBUSY;
+	}
+
+	if (request_irq(port->irq+1, bfin_sir_tx_int, IRQF_DISABLED, "BFIN_SIR_TX", dev)) {
+		dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
+		free_irq(port->irq, dev);
+		return -EBUSY;
+	}
+#endif
+
+	return 0;
+}
+
+static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
+{
+	unsigned short val;
+
+	bfin_sir_stop_rx(port);
+	SIR_UART_DISABLE_INTS(port);
+
+	val = SIR_UART_GET_GCTL(port);
+	val &= ~(UCEN | IREN | RPOLC);
+	SIR_UART_PUT_GCTL(port, val);
+
+#ifdef CONFIG_SIR_BFIN_DMA
+	disable_dma(port->tx_dma_channel);
+	disable_dma(port->rx_dma_channel);
+	del_timer(&(port->rx_dma_timer));
+	dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
+#else
+	free_irq(port->irq+1, dev);
+	free_irq(port->irq, dev);
+#endif
+	free_dma(port->tx_dma_channel);
+	free_dma(port->rx_dma_channel);
+}
+
+#ifdef CONFIG_PM
+static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct bfin_sir_port *sir_port;
+	struct net_device *dev;
+	struct bfin_sir_self *self;
+
+	sir_port = platform_get_drvdata(pdev);
+	if (!sir_port)
+		return 0;
+
+	dev = sir_port->dev;
+	self = netdev_priv(dev);
+	if (self->open) {
+		flush_work(&self->work);
+		bfin_sir_shutdown(self->sir_port, dev);
+		netif_device_detach(dev);
+	}
+
+	return 0;
+}
+static int bfin_sir_resume(struct platform_device *pdev)
+{
+	struct bfin_sir_port *sir_port;
+	struct net_device *dev;
+	struct bfin_sir_self *self;
+	struct bfin_sir_port *port;
+
+	sir_port = platform_get_drvdata(pdev);
+	if (!sir_port)
+		return 0;
+
+	dev = sir_port->dev;
+	self = netdev_priv(dev);
+	port = self->sir_port;
+	if (self->open) {
+		if (self->newspeed) {
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_startup(port, dev);
+		bfin_sir_set_speed(port, 9600);
+		bfin_sir_enable_rx(port);
+		netif_device_attach(dev);
+	}
+	return 0;
+}
+#else
+#define bfin_sir_suspend   NULL
+#define bfin_sir_resume    NULL
+#endif
+
+static void bfin_sir_send_work(struct work_struct *work)
+{
+	struct bfin_sir_self  *self = container_of(work, struct bfin_sir_self, work);
+	struct net_device *dev = self->sir_port->dev;
+	struct bfin_sir_port *port = self->sir_port;
+	unsigned short val;
+	int tx_cnt = 10;
+
+	while (bfin_sir_is_receiving(dev) && --tx_cnt)
+		turnaround_delay(dev->last_rx, self->mtt);
+
+	bfin_sir_stop_rx(port);
+
+	/* To avoid losting RX interrupt, we reset IR function before
+	 * sending data. We also can set the speed, which will
+	 * reset all the UART.
+	 */
+	val = SIR_UART_GET_GCTL(port);
+	val &= ~(IREN | RPOLC);
+	SIR_UART_PUT_GCTL(port, val);
+	SSYNC();
+	val |= IREN | RPOLC;
+	SIR_UART_PUT_GCTL(port, val);
+	SSYNC();
+	/* bfin_sir_set_speed(port, self->speed); */
+
+#ifdef CONFIG_SIR_BFIN_DMA
+	bfin_sir_dma_tx_chars(dev);
+#endif
+	bfin_sir_enable_tx(port);
+	dev->trans_start = jiffies;
+}
+
+static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	int speed = irda_get_next_speed(skb);
+
+	netif_stop_queue(dev);
+
+	self->mtt = irda_get_mtt(skb);
+
+	if (speed != self->speed && speed != -1)
+		self->newspeed = speed;
+
+	self->tx_buff.data = self->tx_buff.head;
+	if (skb->len == 0)
+		self->tx_buff.len = 0;
+	else
+		self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
+
+	schedule_work(&self->work);
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int ret = 0;
+
+	switch (cmd) {
+	case SIOCSBANDWIDTH:
+		if (capable(CAP_NET_ADMIN)) {
+			if (self->open) {
+				ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
+				bfin_sir_enable_rx(port);
+			} else {
+				dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
+				ret = 0;
+			}
+		}
+		break;
+
+	case SIOCSMEDIABUSY:
+		ret = -EPERM;
+		if (capable(CAP_NET_ADMIN)) {
+			irda_device_set_media_busy(dev, TRUE);
+			ret = 0;
+		}
+		break;
+
+	case SIOCGRECEIVING:
+		rq->ifr_receiving = bfin_sir_is_receiving(dev);
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+
+	return &self->stats;
+}
+
+static int bfin_sir_open(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int err = -ENOMEM;
+
+	self->newspeed = 0;
+	self->speed = 9600;
+
+	spin_lock_init(&self->lock);
+
+	err = bfin_sir_startup(port, dev);
+	if (err)
+		goto err_startup;
+
+	bfin_sir_set_speed(port, 9600);
+
+	self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
+	if (!self->irlap)
+		goto err_irlap;
+
+	INIT_WORK(&self->work, bfin_sir_send_work);
+
+	/*
+	 * Now enable the interrupt then start the queue
+	 */
+	self->open = 1;
+	bfin_sir_enable_rx(port);
+
+	netif_start_queue(dev);
+
+	return 0;
+
+err_irlap:
+	self->open = 0;
+	bfin_sir_shutdown(port, dev);
+err_startup:
+	return err;
+}
+
+static int bfin_sir_stop(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+
+	flush_work(&self->work);
+	bfin_sir_shutdown(self->sir_port, dev);
+
+	if (self->rxskb) {
+		dev_kfree_skb(self->rxskb);
+		self->rxskb = NULL;
+	}
+
+	/* Stop IrLAP */
+	if (self->irlap) {
+		irlap_close(self->irlap);
+		self->irlap = NULL;
+	}
+
+	netif_stop_queue(dev);
+	self->open = 0;
+
+	return 0;
+}
+
+static int bfin_sir_init_iobuf(iobuff_t *io, int size)
+{
+	io->head = kmalloc(size, GFP_KERNEL);
+	if (!io->head)
+		return -ENOMEM;
+	io->truesize = size;
+	io->in_frame = FALSE;
+	io->state    = OUTSIDE_FRAME;
+	io->data     = io->head;
+	return 0;
+}
+
+static int __devinit bfin_sir_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct bfin_sir_self *self;
+	unsigned int baudrate_mask;
+	struct bfin_sir_port *sir_port;
+	int err;
+
+	if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
+				per[pdev->id][3] == pdev->id) {
+		err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
+		if (err)
+			return err;
+	} else {
+		dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
+		return -ENODEV;
+	}
+
+	err = -ENOMEM;
+	sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
+	if (!sir_port)
+		goto err_mem_0;
+
+	bfin_sir_init_ports(sir_port, pdev);
+
+	dev = alloc_irdadev(sizeof(*self));
+	if (!dev)
+		goto err_mem_1;
+
+	self = netdev_priv(dev);
+	self->dev = &pdev->dev;
+	self->sir_port = sir_port;
+	sir_port->dev = dev;
+
+	err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
+	if (err)
+		goto err_mem_2;
+	err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
+	if (err)
+		goto err_mem_3;
+
+	dev->hard_start_xmit = bfin_sir_hard_xmit;
+	dev->open            = bfin_sir_open;
+	dev->stop            = bfin_sir_stop;
+	dev->do_ioctl        = bfin_sir_ioctl;
+	dev->get_stats       = bfin_sir_stats;
+	dev->irq             = sir_port->irq;
+
+	irda_init_max_qos_capabilies(&self->qos);
+
+	baudrate_mask = IR_9600;
+
+	switch (max_rate) {
+	case 115200:
+		baudrate_mask |= IR_115200;
+	case 57600:
+		baudrate_mask |= IR_57600;
+	case 38400:
+		baudrate_mask |= IR_38400;
+	case 19200:
+		baudrate_mask |= IR_19200;
+	case 9600:
+		break;
+	default:
+		dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
+	}
+
+	self->qos.baud_rate.bits &= baudrate_mask;
+
+	self->qos.min_turn_time.bits = 1; /* 10 ms or more */
+
+	irda_qos_bits_to_value(&self->qos);
+
+	err = register_netdev(dev);
+
+	if (err) {
+		kfree(self->tx_buff.head);
+err_mem_3:
+		kfree(self->rx_buff.head);
+err_mem_2:
+		free_netdev(dev);
+err_mem_1:
+		kfree(sir_port);
+err_mem_0:
+		peripheral_free_list(per[pdev->id]);
+	} else
+		platform_set_drvdata(pdev, sir_port);
+
+	return err;
+}
+
+static int __devexit bfin_sir_remove(struct platform_device *pdev)
+{
+	struct bfin_sir_port *sir_port;
+	struct net_device *dev = NULL;
+	struct bfin_sir_self *self;
+
+	sir_port = platform_get_drvdata(pdev);
+	if (!sir_port)
+		return 0;
+	dev = sir_port->dev;
+	self = netdev_priv(dev);
+	unregister_netdev(dev);
+	kfree(self->tx_buff.head);
+	kfree(self->rx_buff.head);
+	free_netdev(dev);
+	kfree(sir_port);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver bfin_ir_driver = {
+	.probe   = bfin_sir_probe,
+	.remove  = __devexit_p(bfin_sir_remove),
+	.suspend = bfin_sir_suspend,
+	.resume  = bfin_sir_resume,
+	.driver  = {
+		.name = DRIVER_NAME,
+	},
+};
+
+static int __init bfin_sir_init(void)
+{
+	return platform_driver_register(&bfin_ir_driver);
+}
+
+static void __exit bfin_sir_exit(void)
+{
+	platform_driver_unregister(&bfin_ir_driver);
+}
+
+module_init(bfin_sir_init);
+module_exit(bfin_sir_exit);
+
+module_param(max_rate, int, 0);
+MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
+
+MODULE_AUTHOR("Graf Yang <graf.yang@analog.com>");
+MODULE_DESCRIPTION("Blackfin IrDA driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/bfin_sir.h b/drivers/net/irda/bfin_sir.h
new file mode 100644
index 00000000000..dac71b1f4f9
--- /dev/null
+++ b/drivers/net/irda/bfin_sir.h
@@ -0,0 +1,148 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+};
+#endif
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+#define DRIVER_NAME "bfin_sir"
+
+#define SIR_UART_GET_CHAR(port)    bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)     bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_DLH(port)     bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_LCR(port)     bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)    bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_BF54x
+#define SIR_UART_GET_LSR(port)     bfin_read16((port)->membase + OFFSET_LSR)
+#define SIR_UART_GET_IER(port)     bfin_read16((port)->membase + OFFSET_IER_SET)
+#define SIR_UART_SET_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_SET), v)
+#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
+#define SIR_UART_PUT_LSR(port, v)  bfin_write16(((port)->membase + OFFSET_LSR), v)
+#define SIR_UART_CLEAR_LSR(port)   bfin_write16(((port)->membase + OFFSET_LSR), -1)
+
+#define SIR_UART_SET_DLAB(port)
+#define SIR_UART_CLEAR_DLAB(port)
+
+#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
+#define SIR_UART_DISABLE_INTS(port)   SIR_UART_CLEAR_IER(port, 0xF)
+#define SIR_UART_STOP_TX(port)     do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
+#define SIR_UART_ENABLE_TX(port)   do { SIR_UART_SET_IER(port, ETBEI); } while (0)
+#define SIR_UART_STOP_RX(port)     do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
+#define SIR_UART_ENABLE_RX(port)   do { SIR_UART_SET_IER(port, ERBFI); } while (0)
+#else
+
+#define SIR_UART_GET_IIR(port)     bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_IER(port)     bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+
+#define SIR_UART_SET_DLAB(port)    do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
+#define SIR_UART_CLEAR_DLAB(port)  do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
+
+#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
+#define SIR_UART_DISABLE_INTS(port)   SIR_UART_PUT_IER(port, 0)
+#define SIR_UART_STOP_TX(port)     do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
+#define SIR_UART_ENABLE_TX(port)   do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
+#define SIR_UART_STOP_RX(port)     do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
+#define SIR_UART_ENABLE_RX(port)   do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+#endif
+
+static const unsigned short per[][4] = {
+	/* rx pin      tx pin     NULL  uart_number */
+	{P_UART0_RX, P_UART0_TX,    0,    0},
+	{P_UART1_RX, P_UART1_TX,    0,    1},
+	{P_UART2_RX, P_UART2_TX,    0,    2},
+	{P_UART3_RX, P_UART3_TX,    0,    3},
+};
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 6b6548b9fda..9a0346e751a 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -994,11 +994,11 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
 
   /* change speed pending, wait for its execution */
   if (self->new_speed)
-      return -EBUSY;
+      return NETDEV_TX_BUSY;
 
   /* device stopped (apm) wait for restart */
   if (self->stopped)
-      return -EBUSY;
+      return NETDEV_TX_BUSY;
 
   toshoboe_checkstuck (self);
 
@@ -1049,7 +1049,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
       if (self->txpending)
         {
 	  spin_unlock_irqrestore(&self->spinlock, flags);
-          return -EBUSY;
+          return NETDEV_TX_BUSY;
         }
 
       /* If in SIR mode we need to generate a string of XBOFs */
@@ -1105,7 +1105,7 @@ dumpbufs(skb->data,skb->len,'>');
           ,skb->len, self->ring->tx[self->txs].control, self->txpending);
       toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
       spin_unlock_irqrestore(&self->spinlock, flags);
-      return -EBUSY;
+      return NETDEV_TX_BUSY;
     }
 
   if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_SIRON)
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 006ba23110d..0c0831c03f6 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -389,7 +389,6 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	s32 speed;
 	s16 xbofs;
 	int res, mtt;
-	int	err = 1;	/* Failed */
 
 	IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
 
@@ -430,7 +429,6 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 			irda_usb_change_speed_xbofs(self);
 			netdev->trans_start = jiffies;
 			/* Will netif_wake_queue() in callback */
-			err = 0;	/* No error */
 			goto drop;
 		}
 	}
@@ -542,7 +540,7 @@ drop:
 	/* Drop silently the skb and exit */
 	dev_kfree_skb(skb);
 	spin_unlock_irqrestore(&self->lock, flags);
-	return err;		/* Usually 1 */
+	return NETDEV_TX_OK;
 }
 
 /*------------------------------------------------------------------*/
@@ -1859,6 +1857,42 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
 }
 
+#ifdef CONFIG_PM
+/* USB suspend, so power off the transmitter/receiver */
+static int irda_usb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct irda_usb_cb *self = usb_get_intfdata(intf);
+	int i;
+
+	netif_device_detach(self->netdev);
+
+	if (self->tx_urb != NULL)
+		usb_kill_urb(self->tx_urb);
+	if (self->speed_urb != NULL)
+		usb_kill_urb(self->speed_urb);
+	for (i = 0; i < self->max_rx_urb; i++) {
+		if (self->rx_urb[i] != NULL)
+			usb_kill_urb(self->rx_urb[i]);
+	}
+	return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int irda_usb_resume(struct usb_interface *intf)
+{
+	struct irda_usb_cb *self = usb_get_intfdata(intf);
+	int i;
+
+	for (i = 0; i < self->max_rx_urb; i++) {
+		if (self->rx_urb[i] != NULL)
+			usb_submit_urb(self->rx_urb[i], GFP_KERNEL);
+	}
+
+	netif_device_attach(self->netdev);
+	return 0;
+}
+#endif
+
 /*------------------------------------------------------------------*/
 /*
  * USB device callbacks
@@ -1868,6 +1902,10 @@ static struct usb_driver irda_driver = {
 	.probe		= irda_usb_probe,
 	.disconnect	= irda_usb_disconnect,
 	.id_table	= dongles,
+#ifdef CONFIG_PM
+	.suspend	= irda_usb_suspend,
+	.resume		= irda_usb_resume,
+#endif
 };
 
 /************************* MODULE CALLBACKS *************************/
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 9d813bc4502..c3e4e2c435b 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -156,9 +156,6 @@ static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	int wraplen;
 	int ret = 0;
 
-	if (skb == NULL || netdev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(netdev);
 
 	/* the IRDA wrapping routines don't deal with non linear skb */
@@ -197,7 +194,7 @@ static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	dev_kfree_skb(skb);
 	spin_unlock(&kingsun->lock);
 
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 /* Receive callback function */
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
index b6ffe9715b6..d73b8b64fcb 100644
--- a/drivers/net/irda/ks959-sir.c
+++ b/drivers/net/irda/ks959-sir.c
@@ -391,9 +391,6 @@ static int ks959_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned int wraplen;
 	int ret = 0;
 
-	if (skb == NULL || netdev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(netdev);
 
 	/* the IRDA wrapping routines don't deal with non linear skb */
@@ -428,7 +425,7 @@ static int ks959_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	dev_kfree_skb(skb);
 	spin_unlock(&kingsun->lock);
 
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 /* Receive callback function */
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
index 64df27f2bfd..1ef45ec7442 100644
--- a/drivers/net/irda/ksdazzle-sir.c
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -304,9 +304,6 @@ static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned int wraplen;
 	int ret = 0;
 
-	if (skb == NULL || netdev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(netdev);
 
 	/* the IRDA wrapping routines don't deal with non linear skb */
@@ -341,7 +338,7 @@ static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	dev_kfree_skb(skb);
 	spin_unlock(&kingsun->lock);
 
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 /* Receive callback function */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index fac504d0cfd..f4df1001983 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -824,10 +824,6 @@ static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 	int wraplen;
 	int ret = 0;
 
-
-	if (skb == NULL || ndev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(ndev);
 	mcs = netdev_priv(ndev);
 
@@ -870,7 +866,7 @@ static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	dev_kfree_skb(skb);
 	spin_unlock_irqrestore(&mcs->lock, flags);
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 static const struct net_device_ops mcs_netdev_ops = {
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index e775338b525..3376a4f39e0 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -14,6 +14,7 @@
  */
 #include <linux/module.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
@@ -797,6 +798,16 @@ static int pxa_irda_init_iobuf(iobuff_t *io, int size)
 	return io->head ? 0 : -ENOMEM;
 }
 
+static const struct net_device_ops pxa_irda_netdev_ops = {
+	.ndo_open		= pxa_irda_start,
+	.ndo_stop		= pxa_irda_stop,
+	.ndo_start_xmit		= pxa_irda_hard_xmit,
+	.ndo_do_ioctl		= pxa_irda_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int pxa_irda_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -845,10 +856,7 @@ static int pxa_irda_probe(struct platform_device *pdev)
 	if (err)
 		goto err_startup;
 
-	dev->hard_start_xmit	= pxa_irda_hard_xmit;
-	dev->open		= pxa_irda_start;
-	dev->stop		= pxa_irda_stop;
-	dev->do_ioctl		= pxa_irda_ioctl;
+	dev->netdev_ops = &pxa_irda_netdev_ops;
 
 	irda_init_max_qos_capabilies(&si->qos);
 
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 7a2b003954c..2aeb2e6aec1 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
@@ -875,6 +876,16 @@ static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
 	return io->head ? 0 : -ENOMEM;
 }
 
+static const struct net_device_ops sa1100_irda_netdev_ops = {
+	.ndo_open		= sa1100_irda_start,
+	.ndo_stop		= sa1100_irda_stop,
+	.ndo_start_xmit		= sa1100_irda_hard_xmit,
+	.ndo_do_ioctl		= sa1100_irda_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int sa1100_irda_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -913,11 +924,8 @@ static int sa1100_irda_probe(struct platform_device *pdev)
 	if (err)
 		goto err_mem_5;
 
-	dev->hard_start_xmit	= sa1100_irda_hard_xmit;
-	dev->open		= sa1100_irda_start;
-	dev->stop		= sa1100_irda_stop;
-	dev->do_ioctl		= sa1100_irda_ioctl;
-	dev->irq		= IRQ_Ser2ICP;
+	dev->netdev_ops	= &sa1100_irda_netdev_ops;
+	dev->irq	= IRQ_Ser2ICP;
 
 	irda_init_max_qos_capabilies(&si->qos);
 
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index d940809762e..fd0796c3db3 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -607,7 +607,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 				 * stopped so the network layer will retry after the
 				 * fsm completes and wakes the queue.
 				 */
-				 return 1;
+				 return NETDEV_TX_BUSY;
 			}
 			else if (unlikely(err)) {
 				/* other fatal error - forget the speed change and
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 59d79807b4d..d0797adb5f8 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2124,7 +2124,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
 	while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
 		udelay(1);
 
-	if (count == 0)
+	if (count < 0)
 		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
 }
 
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index cb793c2bade..e44215cb188 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1021,6 +1021,16 @@ static const struct ethtool_ops ops = {
 	.get_link = veth_get_link,
 };
 
+static const struct net_device_ops veth_netdev_ops = {
+	.ndo_open		= veth_open,
+	.ndo_stop		= veth_close,
+	.ndo_start_xmit		= veth_start_xmit,
+	.ndo_change_mtu		= veth_change_mtu,
+	.ndo_set_multicast_list	= veth_set_multicast_list,
+	.ndo_set_mac_address	= NULL,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static struct net_device *veth_probe_one(int vlan,
 		struct vio_dev *vio_dev)
 {
@@ -1067,12 +1077,7 @@ static struct net_device *veth_probe_one(int vlan,
 
 	memcpy(&port->mac_addr, mac_addr, ETH_ALEN);
 
-	dev->open = veth_open;
-	dev->hard_start_xmit = veth_start_xmit;
-	dev->stop = veth_close;
-	dev->change_mtu = veth_change_mtu;
-	dev->set_mac_address = NULL;
-	dev->set_multicast_list = veth_set_multicast_list;
+	dev->netdev_ops = &veth_netdev_ops;
 	SET_ETHTOOL_OPS(dev, &ops);
 
 	SET_NETDEV_DEV(dev, vdev);
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index 11dcda0f453..ff67a84e680 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -192,7 +192,7 @@ ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
 		vendor_name[i] = ixgb_read_phy_reg(hw,
 						   MDIO_PMA_PMD_XPAK_VENDOR_NAME
 						   + i, IXGB_PHY_ADDRESS,
-						   MDIO_PMA_PMD_DID);
+						   MDIO_MMD_PMAPMD);
 	}
 
 	/* Determine the actual vendor */
@@ -1225,15 +1225,15 @@ ixgb_optics_reset(struct ixgb_hw *hw)
 		u16 mdio_reg;
 
 		ixgb_write_phy_reg(hw,
-					MDIO_PMA_PMD_CR1,
-					IXGB_PHY_ADDRESS,
-					MDIO_PMA_PMD_DID,
-					MDIO_PMA_PMD_CR1_RESET);
-
-		mdio_reg = ixgb_read_phy_reg( hw,
-						MDIO_PMA_PMD_CR1,
-						IXGB_PHY_ADDRESS,
-						MDIO_PMA_PMD_DID);
+				   MDIO_CTRL1,
+				   IXGB_PHY_ADDRESS,
+				   MDIO_MMD_PMAPMD,
+				   MDIO_CTRL1_RESET);
+
+		mdio_reg = ixgb_read_phy_reg(hw,
+					     MDIO_CTRL1,
+					     IXGB_PHY_ADDRESS,
+					     MDIO_MMD_PMAPMD);
 	}
 
 	return;
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h
index 831fe0c58b2..af6ca3aab5a 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -29,6 +29,8 @@
 #ifndef _IXGB_HW_H_
 #define _IXGB_HW_H_
 
+#include <linux/mdio.h>
+
 #include "ixgb_osdep.h"
 
 /* Enums */
@@ -507,18 +509,6 @@ typedef enum {
 /* Definitions for the optics devices on the MDIO bus. */
 #define IXGB_PHY_ADDRESS             0x0	/* Single PHY, multiple "Devices" */
 
-/* Standard five-bit Device IDs.  See IEEE 802.3ae, clause 45 */
-#define MDIO_PMA_PMD_DID        0x01
-#define MDIO_WIS_DID            0x02
-#define MDIO_PCS_DID            0x03
-#define MDIO_XGXS_DID           0x04
-
-/* Standard PMA/PMD registers and bit definitions. */
-/* Note: This is a very limited set of definitions,      */
-/* only implemented features are defined.                */
-#define MDIO_PMA_PMD_CR1        0x0000
-#define MDIO_PMA_PMD_CR1_RESET  0x8000
-
 #define MDIO_PMA_PMD_XPAK_VENDOR_NAME       0x803A	/* XPAK/XENPAK devices only */
 
 /* Vendor-specific MDIO registers */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 4a0826b8f6f..9c897cf86b9 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -266,6 +266,8 @@ ixgb_up(struct ixgb_adapter *adapter)
 	napi_enable(&adapter->napi);
 	ixgb_irq_enable(adapter);
 
+	netif_wake_queue(netdev);
+
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	return 0;
@@ -471,10 +473,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_register;
 
-	/* we're going to reset, so assume we have no link for now */
-
+	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
 	DPRINTK(PROBE, INFO, "Intel(R) PRO/10GbE Network Connection\n");
 	ixgb_check_options(adapter);
@@ -592,6 +592,8 @@ ixgb_open(struct net_device *netdev)
 	if (err)
 		goto err_setup_tx;
 
+	netif_carrier_off(netdev);
+
 	/* allocate receive descriptors */
 
 	err = ixgb_setup_rx_resources(adapter);
@@ -602,6 +604,8 @@ ixgb_open(struct net_device *netdev)
 	if (err)
 		goto err_up;
 
+	netif_start_queue(netdev);
+
 	return 0;
 
 err_up:
@@ -1116,7 +1120,6 @@ ixgb_watchdog(unsigned long data)
 			adapter->link_speed = 10000;
 			adapter->link_duplex = FULL_DUPLEX;
 			netif_carrier_on(netdev);
-			netif_wake_queue(netdev);
 		}
 	} else {
 		if (netif_carrier_ok(netdev)) {
@@ -1125,8 +1128,6 @@ ixgb_watchdog(unsigned long data)
 			printk(KERN_INFO "ixgb: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
-
 		}
 	}
 
@@ -1139,6 +1140,8 @@ ixgb_watchdog(unsigned long data)
 			 * to get done, so reset controller to flush Tx.
 			 * (Do the reset outside of interrupt context). */
 			schedule_work(&adapter->tx_timeout_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -1297,7 +1300,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 		buffer_info->length = size;
 		WARN_ON(buffer_info->dma != 0);
 		buffer_info->time_stamp = jiffies;
-		buffer_info->dma = map[0] + offset;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 			pci_map_single(adapter->pdev,
 				skb->data + offset,
 				size,
@@ -1337,7 +1340,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
-			buffer_info->dma = map[f + 1] + offset;
+			buffer_info->dma = map[f] + offset;
 			buffer_info->next_to_watch = 0;
 
 			len -= size;
@@ -1485,7 +1488,6 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (count) {
 		ixgb_tx_queue(adapter, count, vlan_id, tx_flags);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
 
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h
index d92e72bd627..371a6be4d96 100644
--- a/drivers/net/ixgb/ixgb_osdep.h
+++ b/drivers/net/ixgb/ixgb_osdep.h
@@ -40,7 +40,7 @@
 #include <linux/sched.h>
 
 #undef ASSERT
-#define ASSERT(x)	if (!(x)) BUG()
+#define ASSERT(x)	BUG_ON(!(x))
 #define MSGOUT(S, A, B)	printk(KERN_DEBUG S "\n", A, B)
 
 #ifdef DBG
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index b3f8208ec7b..21b41f42b61 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -37,3 +37,5 @@ ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o
+
+ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index c26433d1460..cd22323cfd2 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -36,6 +36,10 @@
 #include "ixgbe_type.h"
 #include "ixgbe_common.h"
 #include "ixgbe_dcb.h"
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#define IXGBE_FCOE
+#include "ixgbe_fcoe.h"
+#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
 #ifdef CONFIG_IXGBE_DCA
 #include <linux/dca.h>
 #endif
@@ -71,6 +75,8 @@
 #define IXGBE_RXBUFFER_128   128    /* Used for packet split */
 #define IXGBE_RXBUFFER_256   256    /* Used for packet split */
 #define IXGBE_RXBUFFER_2048  2048
+#define IXGBE_RXBUFFER_4096  4096
+#define IXGBE_RXBUFFER_8192  8192
 #define IXGBE_MAX_RXBUFFER   16384  /* largest size for a single descriptor */
 
 #define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256
@@ -84,6 +90,8 @@
 #define IXGBE_TX_FLAGS_VLAN		(u32)(1 << 1)
 #define IXGBE_TX_FLAGS_TSO		(u32)(1 << 2)
 #define IXGBE_TX_FLAGS_IPV4		(u32)(1 << 3)
+#define IXGBE_TX_FLAGS_FCOE		(u32)(1 << 4)
+#define IXGBE_TX_FLAGS_FSO		(u32)(1 << 5)
 #define IXGBE_TX_FLAGS_VLAN_MASK	0xffff0000
 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK   0x0000e000
 #define IXGBE_TX_FLAGS_VLAN_SHIFT	16
@@ -113,17 +121,18 @@ struct ixgbe_queue_stats {
 
 struct ixgbe_ring {
 	void *desc;			/* descriptor ring memory */
-	dma_addr_t dma;			/* phys. address of descriptor ring */
-	unsigned int size;		/* length in bytes */
-	unsigned int count;		/* amount of descriptors */
-	unsigned int next_to_use;
-	unsigned int next_to_clean;
-
-	int queue_index; /* needed for multiqueue queue management */
 	union {
 		struct ixgbe_tx_buffer *tx_buffer_info;
 		struct ixgbe_rx_buffer *rx_buffer_info;
 	};
+	u8 atr_sample_rate;
+	u8 atr_count;
+	u16 count;			/* amount of descriptors */
+	u16 rx_buf_len;
+	u16 next_to_use;
+	u16 next_to_clean;
+
+	u8 queue_index; /* needed for multiqueue queue management */
 
 	u16 head;
 	u16 tail;
@@ -131,22 +140,24 @@ struct ixgbe_ring {
 	unsigned int total_bytes;
 	unsigned int total_packets;
 
-	u16 reg_idx; /* holds the special value that gets the hardware register
-		      * offset associated with this ring, which is different
-		      * for DCB and RSS modes */
-
 #ifdef CONFIG_IXGBE_DCA
 	/* cpu for tx queue */
 	int cpu;
 #endif
-	struct ixgbe_queue_stats stats;
-	u64 v_idx; /* maps directly to the index for this ring in the hardware
-	            * vector array, can also be used for finding the bit in EICR
-	            * and friends that represents the vector for this ring */
 
+	u16 work_limit;			/* max work per interrupt */
+	u16 reg_idx;			/* holds the special value that gets
+					 * the hardware register offset
+					 * associated with this ring, which is
+					 * different for DCB and RSS modes
+					 */
 
-	u16 work_limit;                /* max work per interrupt */
-	u16 rx_buf_len;
+	struct ixgbe_queue_stats stats;
+	unsigned long reinit_state;
+	u64 rsc_count;			/* stat for coalesced packets */
+
+	unsigned int size;		/* length in bytes */
+	dma_addr_t dma;			/* phys. address of descriptor ring */
 };
 
 enum ixgbe_ring_f_enum {
@@ -154,6 +165,10 @@ enum ixgbe_ring_f_enum {
 	RING_F_DCB,
 	RING_F_VMDQ,
 	RING_F_RSS,
+	RING_F_FDIR,
+#ifdef IXGBE_FCOE
+	RING_F_FCOE,
+#endif /* IXGBE_FCOE */
 
 	RING_F_ARRAY_SIZE      /* must be last in enum set */
 };
@@ -161,6 +176,10 @@ enum ixgbe_ring_f_enum {
 #define IXGBE_MAX_DCB_INDICES   8
 #define IXGBE_MAX_RSS_INDICES  16
 #define IXGBE_MAX_VMDQ_INDICES 16
+#define IXGBE_MAX_FDIR_INDICES 64
+#ifdef IXGBE_FCOE
+#define IXGBE_MAX_FCOE_INDICES  8
+#endif /* IXGBE_FCOE */
 struct ixgbe_ring_feature {
 	int indices;
 	int mask;
@@ -178,6 +197,9 @@ struct ixgbe_ring_feature {
  */
 struct ixgbe_q_vector {
 	struct ixgbe_adapter *adapter;
+	unsigned int v_idx; /* index of q_vector within array, also used for
+	                     * finding the bit in EICR and friends that
+	                     * represents the vector for this ring */
 	struct napi_struct napi;
 	DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
 	DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
@@ -207,7 +229,15 @@ struct ixgbe_q_vector {
 #define IXGBE_TX_CTXTDESC_ADV(R, i)	    \
 	(&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i]))
 
+#define IXGBE_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
+#define IXGBE_TX_DESC(R, i)	IXGBE_GET_DESC(R, i, ixgbe_legacy_tx_desc)
+#define IXGBE_RX_DESC(R, i)	IXGBE_GET_DESC(R, i, ixgbe_legacy_rx_desc)
+
 #define IXGBE_MAX_JUMBO_FRAME_SIZE        16128
+#ifdef IXGBE_FCOE
+/* Use 3K as the baby jumbo frame size for FCoE */
+#define IXGBE_FCOE_JUMBO_FRAME_SIZE       3072
+#endif /* IXGBE_FCOE */
 
 #define OTHER_VECTOR 1
 #define NON_Q_VECTORS (OTHER_VECTOR)
@@ -229,11 +259,12 @@ struct ixgbe_adapter {
 	struct vlan_group *vlgrp;
 	u16 bd_number;
 	struct work_struct reset_task;
-	struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS];
+	struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
 	char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
 	struct ixgbe_dcb_config dcb_cfg;
 	struct ixgbe_dcb_config temp_dcb_cfg;
 	u8 dcb_set_bitmap;
+	enum ixgbe_fc_mode last_lfc_mode;
 
 	/* Interrupt Throttle Rate */
 	u32 itr_setting;
@@ -294,7 +325,13 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_IN_WATCHDOG_TASK             (u32)(1 << 23)
 #define IXGBE_FLAG_IN_SFP_LINK_TASK             (u32)(1 << 24)
 #define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 25)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 26)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
 
+	u32 flags2;
+#define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1)
+#define IXGBE_FLAG2_RSC_ENABLED                 (u32)(1 << 1)
 /* default to trying for four seconds */
 #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
 
@@ -303,6 +340,10 @@ struct ixgbe_adapter {
 	struct pci_dev *pdev;
 	struct net_device_stats net_stats;
 
+	u32 test_icr;
+	struct ixgbe_ring test_tx_ring;
+	struct ixgbe_ring test_rx_ring;
+
 	/* structs defined in ixgbe_hw.h */
 	struct ixgbe_hw hw;
 	u16 msg_enable;
@@ -325,6 +366,14 @@ struct ixgbe_adapter {
 	struct timer_list sfp_timer;
 	struct work_struct multispeed_fiber_task;
 	struct work_struct sfp_config_module_task;
+	u32 fdir_pballoc;
+	u32 atr_sample_rate;
+	spinlock_t fdir_perfect_lock;
+	struct work_struct fdir_reinit_task;
+#ifdef IXGBE_FCOE
+	struct ixgbe_fcoe fcoe;
+#endif /* IXGBE_FCOE */
+	u64 rsc_count;
 	u32 wol;
 	u16 eeprom_version;
 };
@@ -333,6 +382,7 @@ enum ixbge_state_t {
 	__IXGBE_TESTING,
 	__IXGBE_RESETTING,
 	__IXGBE_DOWN,
+	__IXGBE_FDIR_INIT_DONE,
 	__IXGBE_SFP_MODULE_NOT_FOUND
 };
 
@@ -363,10 +413,77 @@ extern int ixgbe_setup_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *)
 extern void ixgbe_free_rx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
 extern void ixgbe_free_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
 extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
-extern void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter);
 extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
-void ixgbe_napi_add_all(struct ixgbe_adapter *adapter);
-void ixgbe_napi_del_all(struct ixgbe_adapter *adapter);
-extern void ixgbe_write_eitr(struct ixgbe_adapter *, int, u32);
+extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
+extern void ixgbe_write_eitr(struct ixgbe_q_vector *);
+extern int ethtool_ioctl(struct ifreq *ifr);
+extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc);
+extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
+extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+                                                 struct ixgbe_atr_input *input,
+                                                 u8 queue);
+extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+                                               struct ixgbe_atr_input *input,
+                                               u16 soft_id,
+                                               u8 queue);
+extern u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *input, u32 key);
+extern s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input,
+                                       u16 vlan_id);
+extern s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 src_addr);
+extern s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 dst_addr);
+extern s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 src_addr_1, u32 src_addr_2,
+                                        u32 src_addr_3, u32 src_addr_4);
+extern s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 dst_addr_1, u32 dst_addr_2,
+                                        u32 dst_addr_3, u32 dst_addr_4);
+extern s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input,
+                                        u16 src_port);
+extern s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input,
+                                        u16 dst_port);
+extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
+                                         u16 flex_byte);
+extern s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input,
+                                       u8 vm_pool);
+extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
+                                      u8 l4type);
+extern s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input,
+                                       u16 *vlan_id);
+extern s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 *src_addr);
+extern s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 *dst_addr);
+extern s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 *src_addr_1, u32 *src_addr_2,
+                                        u32 *src_addr_3, u32 *src_addr_4);
+extern s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 *dst_addr_1, u32 *dst_addr_2,
+                                        u32 *dst_addr_3, u32 *dst_addr_4);
+extern s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
+                                        u16 *src_port);
+extern s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
+                                        u16 *dst_port);
+extern s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
+                                         u16 *flex_byte);
+extern s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input,
+                                       u8 *vm_pool);
+extern s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
+                                      u8 *l4type);
+#ifdef IXGBE_FCOE
+extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
+extern int ixgbe_fso(struct ixgbe_adapter *adapter,
+                     struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+                     u32 tx_flags, u8 *hdr_len);
+extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter);
+extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+                          union ixgbe_adv_rx_desc *rx_desc,
+                          struct sk_buff *skb);
+extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+                              struct scatterlist *sgl, unsigned int sgc);
+extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
+#endif /* IXGBE_FCOE */
 
 #endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 4791238c3f6..b9923047ce1 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -75,18 +75,49 @@ static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw)
 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* Call PHY identify routine to get the phy type */
+	ixgbe_identify_phy_generic(hw);
+
+	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
 	struct ixgbe_phy_info *phy = &hw->phy;
 	s32 ret_val = 0;
 	u16 list_offset, data_offset;
 
-	/* Set the bus information prior to PHY identification */
-	mac->ops.get_bus_info(hw);
+	/* Identify the PHY */
+	phy->ops.identify(hw);
 
-	/* Call PHY identify routine to get the phy type */
-	ixgbe_identify_phy_generic(hw);
+	/* Overwrite the link function pointers if copper PHY */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+		mac->ops.setup_link_speed =
+		                     &ixgbe_setup_copper_link_speed_82598;
+		mac->ops.get_link_capabilities =
+		                  &ixgbe_get_copper_link_capabilities_82598;
+	}
 
-	/* PHY Init */
-	switch (phy->type) {
+	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 		phy->ops.get_firmware_version =
@@ -106,8 +137,8 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 
 		/* Check to see if SFP+ module is supported */
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
-		                                              &list_offset,
-		                                              &data_offset);
+		                                            &list_offset,
+		                                            &data_offset);
 		if (ret_val != 0) {
 			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
 			goto out;
@@ -117,21 +148,6 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 		break;
 	}
 
-	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
-		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
-		mac->ops.setup_link_speed =
-		                     &ixgbe_setup_copper_link_speed_82598;
-		mac->ops.get_link_capabilities =
-		                     &ixgbe_get_copper_link_capabilities_82598;
-	}
-
-	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
-	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
-	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
-	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
-	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
-
 out:
 	return ret_val;
 }
@@ -149,12 +165,19 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
                                              bool *autoneg)
 {
 	s32 status = 0;
+	u32 autoc = 0;
 
 	/*
 	 * Determine link capabilities based on the stored value of AUTOC,
-	 * which represents EEPROM defaults.
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
 	 */
-	switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 		*autoneg = false;
@@ -173,9 +196,9 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
 	case IXGBE_AUTOC_LMS_KX4_AN:
 	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*autoneg = true;
 		break;
@@ -206,14 +229,13 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
 	*speed = 0;
 	*autoneg = true;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
 	                              &speed_ability);
 
 	if (status == 0) {
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		if (speed_ability & MDIO_SPEED_10G)
 		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		if (speed_ability & MDIO_PMA_SPEED_1000)
 		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
 	}
 
@@ -271,6 +293,17 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	u32 rmcs_reg;
 	u32 reg;
 
+#ifdef CONFIG_DCB
+	if (hw->fc.requested_mode == ixgbe_fc_pfc)
+		goto out;
+
+#endif /* CONFIG_DCB */
+	/* Negotiate the fc mode to use */
+	ret_val = ixgbe_fc_autoneg(hw);
+	if (ret_val)
+		goto out;
+
+	/* Disable any previous flow control settings */
 	fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
 	fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
 
@@ -282,14 +315,20 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	 * 0: Flow control is completely disabled
 	 * 1: Rx flow control is enabled (we can receive pause frames,
 	 *    but not send pause frames).
-	 * 2:  Tx flow control is enabled (we can send pause frames but
+	 * 2: Tx flow control is enabled (we can send pause frames but
 	 *     we do not support receiving pause frames).
 	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
 	 * other: Invalid.
+#ifdef CONFIG_DCB
+	 * 4: Priority Flow Control is enabled.
+#endif
 	 */
 	switch (hw->fc.current_mode) {
 	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
 		break;
 	case ixgbe_fc_rx_pause:
 		/*
@@ -314,6 +353,11 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 		fctrl_reg |= IXGBE_FCTRL_RFCE;
 		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
 		break;
+#ifdef CONFIG_DCB
+	case ixgbe_fc_pfc:
+		goto out;
+		break;
+#endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = -IXGBE_ERR_CONFIG;
@@ -321,7 +365,8 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 		break;
 	}
 
-	/* Enable 802.3x based flow control settings. */
+	/* Set 802.3x based flow control settings. */
+	fctrl_reg |= IXGBE_FCTRL_DPF;
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
 	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
 
@@ -340,7 +385,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num));
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
 	if ((packetbuf_num & 1) == 0)
 		reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
 	else
@@ -354,77 +399,6 @@ out:
 }
 
 /**
- *  ixgbe_setup_fc_82598 - Configure flow control settings
- *  @hw: pointer to hardware structure
- *  @packetbuf_num: packet buffer number (0-7)
- *
- *  Configures the flow control settings based on SW configuration.  This
- *  function is used for 802.3x flow control configuration only.
- **/
-static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
-	s32 ret_val = 0;
-	ixgbe_link_speed speed;
-	bool link_up;
-
-	/* Validate the packetbuf configuration */
-	if (packetbuf_num < 0 || packetbuf_num > 7) {
-		hw_dbg(hw, "Invalid packet buffer number [%d], expected range is"
-		          " 0-7\n", packetbuf_num);
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
-
-	/*
-	 * Validate the water mark configuration.  Zero water marks are invalid
-	 * because it causes the controller to just blast out fc packets.
-	 */
-	if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
-		hw_dbg(hw, "Invalid water mark configuration\n");
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
-
-	/*
-	 * Validate the requested mode.  Strict IEEE mode does not allow
-	 * ixgbe_fc_rx_pause because it will cause testing anomalies.
-	 */
-	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
-		hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
-
-	/*
-	 * 10gig parts do not have a word in the EEPROM to determine the
-	 * default flow control setting, so we explicitly set it to full.
-	 */
-	if (hw->fc.requested_mode == ixgbe_fc_default)
-		hw->fc.requested_mode = ixgbe_fc_full;
-
-	/*
-	 * Save off the requested flow control mode for use later.  Depending
-	 * on the link partner's capabilities, we may or may not use this mode.
-	 */
-
-	hw->fc.current_mode = hw->fc.requested_mode;
-
-	/* Decide whether to use autoneg or not. */
-	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-	if (!hw->fc.disable_fc_autoneg && hw->phy.multispeed_fiber &&
-	    (speed == IXGBE_LINK_SPEED_1GB_FULL))
-		ret_val = ixgbe_fc_autoneg(hw);
-
-	if (ret_val)
-		goto out;
-
-	ret_val = ixgbe_fc_enable_82598(hw, packetbuf_num);
-
-out:
-	return ret_val;
-}
-
-/**
  *  ixgbe_setup_mac_link_82598 - Configures MAC link settings
  *  @hw: pointer to hardware structure
  *
@@ -463,13 +437,6 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
 		}
 	}
 
-	/*
-	 * We want to save off the original Flow Control configuration just in
-	 * case we get disconnected and then reconnected into a different hub
-	 * or switch with different Flow Control capabilities.
-	 */
-	ixgbe_setup_fc_82598(hw, 0);
-
 	/* Add delay to filter out noises during initial link setup */
 	msleep(50);
 
@@ -500,9 +467,9 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 	 * clear indicates active; set indicates inactive.
 	 */
 	if (hw->phy.type == ixgbe_phy_nl) {
-		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
-		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
-		hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
+		hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
 		                     &adapt_comp_reg);
 		if (link_up_wait_to_complete) {
 			for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
@@ -515,10 +482,10 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 				}
 				msleep(100);
 				hw->phy.ops.read_reg(hw, 0xC79F,
-				                     IXGBE_TWINAX_DEV,
+				                     MDIO_MMD_PMAPMD,
 				                     &link_reg);
 				hw->phy.ops.read_reg(hw, 0xC00C,
-				                     IXGBE_TWINAX_DEV,
+				                     MDIO_MMD_PMAPMD,
 				                     &adapt_comp_reg);
 			}
 		} else {
@@ -556,6 +523,11 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 	else
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 
+	/* if link is down, zero out the current_mode */
+	if (*link_up == false) {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw->fc.fc_was_autonegged = false;
+	}
 out:
 	return 0;
 }
@@ -673,6 +645,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 {
 	s32 status = 0;
+	s32 phy_status = 0;
 	u32 ctrl;
 	u32 gheccr;
 	u32 i;
@@ -716,14 +689,27 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 	}
 
 	/* Reset PHY */
-	if (hw->phy.reset_disable == false)
+	if (hw->phy.reset_disable == false) {
+		/* PHY ops must be identified and initialized prior to reset */
+
+		/* Init PHY and function pointers, perform SFP setup */
+		phy_status = hw->phy.ops.init(hw);
+		if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+			goto reset_hw_out;
+		else if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+			goto no_phy_reset;
+
+
 		hw->phy.ops.reset(hw);
+	}
 
+no_phy_reset:
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests before reset
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0) {
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
 		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 	}
@@ -767,9 +753,19 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
 	}
 
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table
+	 */
+	hw->mac.ops.init_rx_addrs(hw);
+
 	/* Store the permanent mac address */
 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
+reset_hw_out:
+	if (phy_status)
+		status = phy_status;
+
 	return status;
 }
 
@@ -954,14 +950,14 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
 		sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
 		hw->phy.ops.write_reg(hw,
 		                      IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
-		                      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+		                      MDIO_MMD_PMAPMD,
 		                      sfp_addr);
 
 		/* Poll status */
 		for (i = 0; i < 100; i++) {
 			hw->phy.ops.read_reg(hw,
 			                     IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
-			                     IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+			                     MDIO_MMD_PMAPMD,
 			                     &sfp_stat);
 			sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
 			if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
@@ -977,7 +973,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
 
 		/* Read data */
 		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
-		                     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
+		                     MDIO_MMD_PMAPMD, &sfp_data);
 
 		*eeprom_data = (u8)(sfp_data >> 8);
 	} else {
@@ -998,35 +994,56 @@ out:
 static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
+
+	hw->phy.ops.identify(hw);
+
+	/* Copper PHY must be checked before AUTOC LMS to determine correct
+	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+				     &ext_ability);
+		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82598:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-				  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
-		break;
-	case IXGBE_DEV_ID_82598_BX:
-		physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
-	case IXGBE_DEV_ID_82598EB_CX4:
-	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
-		break;
-	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		else
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
 		break;
-	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
-	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
-	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else /* XAUI */
+			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
-	case IXGBE_DEV_ID_82598EB_XF_LR:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
 		break;
-	case IXGBE_DEV_ID_82598AT:
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_T |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_T);
+	default:
 		break;
-	case IXGBE_DEV_ID_82598EB_SFP_LOM:
+	}
+
+	if (hw->phy.type == ixgbe_phy_nl) {
 		hw->phy.ops.identify_sfp(hw);
 
 		switch (hw->phy.sfp_type) {
@@ -1043,13 +1060,25 @@ static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 			break;
 		}
-		break;
+	}
 
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		break;
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 
@@ -1086,7 +1115,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.disable_mc		= &ixgbe_disable_mc_generic,
 	.clear_vfta		= &ixgbe_clear_vfta_82598,
 	.set_vfta		= &ixgbe_set_vfta_82598,
-	.setup_fc		= &ixgbe_setup_fc_82598,
+	.fc_enable		= &ixgbe_fc_enable_82598,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
@@ -1099,6 +1128,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
 static struct ixgbe_phy_operations phy_ops_82598 = {
 	.identify		= &ixgbe_identify_phy_generic,
 	.identify_sfp		= &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82598,
 	.reset			= &ixgbe_reset_phy_generic,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
 	.write_reg		= &ixgbe_write_phy_reg_generic,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 29771fbaa42..1984cab7d48 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -71,10 +71,10 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
 s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
 s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
 s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
-s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw);
 s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
 s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
 
 void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 {
@@ -100,22 +100,36 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 
 	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
 		ixgbe_init_mac_link_ops_82599(hw);
+
+		hw->phy.ops.reset = NULL;
+
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
 		                                              &data_offset);
 
 		if (ret_val != 0)
 			goto setup_sfp_out;
 
+		/* PHY config will finish before releasing the semaphore */
+		ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val != 0) {
+			ret_val = IXGBE_ERR_SWFW_SYNC;
+			goto setup_sfp_out;
+		}
+
 		hw->eeprom.ops.read(hw, ++data_offset, &data_value);
 		while (data_value != 0xffff) {
 			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
 			IXGBE_WRITE_FLUSH(hw);
 			hw->eeprom.ops.read(hw, ++data_offset, &data_value);
 		}
-		/* Now restart DSP */
-		IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102);
-		IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d);
-		IXGBE_WRITE_FLUSH(hw);
+		/* Now restart DSP by setting Restart_AN */
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+		    (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART));
+
+		/* Release the semaphore */
+		ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		/* Delay obtaining semaphore again to allow FW access */
+		msleep(hw->eeprom.semaphore_delay);
 	}
 
 setup_sfp_out:
@@ -146,51 +160,60 @@ u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	struct ixgbe_phy_info *phy = &hw->phy;
-	s32 ret_val;
 
-	/* Set the bus information prior to PHY identification */
-	mac->ops.get_bus_info(hw);
+	ixgbe_init_mac_link_ops_82599(hw);
 
-	/* Call PHY identify routine to get the Cu or SFI phy type */
-	ret_val = phy->ops.identify(hw);
+	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
 
-	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
-		goto get_invariants_out;
+	return 0;
+}
 
-	ixgbe_init_mac_link_ops_82599(hw);
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
 
-	/* Setup SFP module if there is one present. */
-	ret_val = mac->ops.setup_sfp(hw);
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
 
 	/* If copper media, overwrite with copper function pointers */
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
 		mac->ops.setup_link_speed =
-		                  &ixgbe_setup_copper_link_speed_82599;
+		                     &ixgbe_setup_copper_link_speed_82599;
 		mac->ops.get_link_capabilities =
 		                  &ixgbe_get_copper_link_capabilities_82599;
 	}
 
-	/* PHY Init */
+	/* Set necessary function pointers based on phy type */
 	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 		phy->ops.get_firmware_version =
-		                  &ixgbe_get_phy_firmware_version_tnx;
+		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
 	default:
 		break;
 	}
 
-	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
-	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
-	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
-	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
-	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
-
-get_invariants_out:
 	return ret_val;
 }
 
@@ -207,8 +230,19 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
                                       bool *negotiation)
 {
 	s32 status = 0;
+	u32 autoc = 0;
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 
-	switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = false;
@@ -232,22 +266,22 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	case IXGBE_AUTOC_LMS_KX4_KX_KR:
 	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = true;
 		break;
 
 	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
 		*speed = IXGBE_LINK_SPEED_100_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = true;
 		break;
@@ -291,14 +325,13 @@ static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
 	*speed = 0;
 	*autoneg = true;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
 	                              &speed_ability);
 
 	if (status == 0) {
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		if (speed_ability & MDIO_SPEED_10G)
 		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		if (speed_ability & MDIO_PMA_SPEED_1000)
 		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
 	}
 
@@ -323,8 +356,8 @@ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	}
 
 	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599:
 	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
 		break;
@@ -380,9 +413,6 @@ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw)
 		}
 	}
 
-	/* Set up flow control */
-	status = ixgbe_setup_fc_generic(hw, 0);
-
 	/* Add delay to filter out noises during initial link setup */
 	msleep(50);
 
@@ -428,11 +458,31 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
 	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
 	bool link_up = false;
 	bool negotiation;
+	int i;
 
 	/* Mask off requested but non-supported speeds */
 	hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
 	speed &= phy_link_speed;
 
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	/*
+	 * When the driver changes the link speeds that it can support,
+	 * it sets autotry_restart to true to indicate that we need to
+	 * initiate a new autotry session with the link partner.  To do
+	 * so, we set the speed then disable and re-enable the tx laser, to
+	 * alert the link partner that it also needs to restart autotry on its
+	 * end.  This is consistent with true clause 37 autoneg, which also
+	 * involves a loss of signal.
+	 */
+
 	/*
 	 * Try each speed one by one, highest priority first.  We do this in
 	 * software because 10gb fiber doesn't support speed autonegotiation.
@@ -441,21 +491,52 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
 		speedcnt++;
 		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
 
-		/* Set hardware SDP's */
+		/* If we already have link at this speed, just jump out */
+		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+
+		if ((phy_link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
 		esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
 		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 
-		ixgbe_setup_mac_link_speed_82599(hw,
-		                                 IXGBE_LINK_SPEED_10GB_FULL,
-		                                 autoneg,
-		                                 autoneg_wait_to_complete);
+		/* Allow module to change analog characteristics (1G->10G) */
+		msleep(40);
 
-		msleep(50);
-
-		/* If we have link, just jump out */
-		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
-		if (link_up)
+		status = ixgbe_setup_mac_link_speed_82599(hw,
+		                                     IXGBE_LINK_SPEED_10GB_FULL,
+		                                     autoneg,
+		                                     autoneg_wait_to_complete);
+		if (status != 0)
 			goto out;
+
+		/* Flap the tx laser if it has not already been done */
+		if (hw->mac.autotry_restart) {
+			/* Disable tx laser; allow 100us to go dark per spec */
+			esdp_reg |= IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			udelay(100);
+
+			/* Enable tx laser; allow 2ms to light up per spec */
+			esdp_reg &= ~IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			msleep(2);
+
+			hw->mac.autotry_restart = false;
+		}
+
+		/* The controller may take up to 500ms at 10g to acquire link */
+		for (i = 0; i < 5; i++) {
+			/* Wait for the link partner to also set speed */
+			msleep(100);
+
+			/* If we have link, just jump out */
+			hw->mac.ops.check_link(hw, &phy_link_speed,
+			                       &link_up, false);
+			if (link_up)
+				goto out;
+		}
 	}
 
 	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
@@ -463,16 +544,44 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
 		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
 			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
 
-		/* Set hardware SDP's */
+		/* If we already have link at this speed, just jump out */
+		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+
+		if ((phy_link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
 		esdp_reg &= ~IXGBE_ESDP_SDP5;
 		esdp_reg |= IXGBE_ESDP_SDP5_DIR;
 		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 
-		ixgbe_setup_mac_link_speed_82599(
-			hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg,
-			autoneg_wait_to_complete);
+		/* Allow module to change analog characteristics (10G->1G) */
+		msleep(40);
 
-		msleep(50);
+		status = ixgbe_setup_mac_link_speed_82599(hw,
+		                                      IXGBE_LINK_SPEED_1GB_FULL,
+		                                      autoneg,
+		                                      autoneg_wait_to_complete);
+		if (status != 0)
+			goto out;
+
+		/* Flap the tx laser if it has not already been done */
+		if (hw->mac.autotry_restart) {
+			/* Disable tx laser; allow 100us to go dark per spec */
+			esdp_reg |= IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			udelay(100);
+
+			/* Enable tx laser; allow 2ms to light up per spec */
+			esdp_reg &= ~IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			msleep(2);
+
+			hw->mac.autotry_restart = false;
+		}
+
+		/* Wait for the link partner to also set speed */
+		msleep(100);
 
 		/* If we have link, just jump out */
 		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
@@ -538,6 +647,11 @@ s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	else
 		*speed = IXGBE_LINK_SPEED_100_FULL;
 
+	/* if link is down, zero out the current_mode */
+	if (*link_up == false) {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw->fc.fc_was_autonegged = false;
+	}
 
 	return 0;
 }
@@ -558,6 +672,8 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 	s32 status = 0;
 	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 start_autoc = autoc;
+	u32 orig_autoc = 0;
 	u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
 	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
@@ -571,15 +687,25 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 
 	if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
 		status = IXGBE_ERR_LINK_SETUP;
-	} else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
-	           link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
-	           link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+		goto out;
+	}
+
+	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+	if (hw->mac.orig_link_settings_stored)
+		orig_autoc = hw->mac.orig_autoc;
+	else
+		orig_autoc = autoc;
+
+
+	if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
 		/* Set KX4/KX/KR support according to speed requested */
 		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
 		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
-			if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
 				autoc |= IXGBE_AUTOC_KX4_SUPP;
-			if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+			if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
 				autoc |= IXGBE_AUTOC_KR_SUPP;
 		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 			autoc |= IXGBE_AUTOC_KX_SUPP;
@@ -605,7 +731,7 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 		}
 	}
 
-	if (status == 0) {
+	if (autoc != start_autoc) {
 		/* Restart link */
 		autoc |= IXGBE_AUTOC_AN_RESTART;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
@@ -632,13 +758,11 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 			}
 		}
 
-		/* Set up flow control */
-		status = ixgbe_setup_fc_generic(hw, 0);
-
 		/* Add delay to filter out noises during initial link setup */
 		msleep(50);
 	}
 
+out:
 	return status;
 }
 
@@ -705,14 +829,30 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 	/* Call adapter stop to disable tx/rx and clear interrupts */
 	hw->mac.ops.stop_adapter(hw);
 
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Init PHY and function pointers, perform SFP setup */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
 	/* Reset PHY */
-	hw->phy.ops.reset(hw);
+	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+		hw->phy.ops.reset(hw);
 
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests before reset
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0) {
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
 		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 	}
@@ -770,9 +910,30 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 		}
 	}
 
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
 	/* Store the permanent mac address */
 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+		                    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+reset_hw_out:
 	return status;
 }
 
@@ -1004,6 +1165,931 @@ s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+	int i;
+	u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+	fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+	/*
+	 * Before starting reinitialization process,
+	 * FDIRCMD.CMD must be zero.
+	 */
+	for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+		if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+		      IXGBE_FDIRCMD_CMD_MASK))
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIRCMD_CMD_POLL) {
+		hw_dbg(hw ,"Flow Director previous command isn't complete, "
+		       "aborting table re-initialization. \n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+	                (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+	                 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+	                (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+	                 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * Clear FDIR Hash register to clear any leftover hashes
+	 * waiting to be programmed.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+	IXGBE_WRITE_FLUSH(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll init-done after we write FDIRCTRL register */
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	/* Clear FDIR statistics registers (read to clear) */
+	IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+	IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ *  @hw: pointer to hardware structure
+ *  @pballoc: which mode to allocate filters with
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
+{
+	u32 fdirctrl = 0;
+	u32 pbsize;
+	int i;
+
+	/*
+	 * Before enabling Flow Director, the Rx Packet Buffer size
+	 * must be reduced.  The new value is the current size minus
+	 * flow director memory usage size.
+	 */
+	pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc));
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0),
+	    (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize));
+
+	/*
+	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
+	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * would be bigger than programmed and filter space would run into
+	 * the PB 0 region.
+	 */
+	for (i = 1; i < 8; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+
+	/* Send interrupt when 64 filters are left */
+	fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
+
+	/* Set the maximum length per hash bucket to 0xA filters */
+	fdirctrl |= 0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT;
+
+	switch (pballoc) {
+	case IXGBE_FDIR_PBALLOC_64K:
+		/* 8k - 1 signature filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K;
+		break;
+	case IXGBE_FDIR_PBALLOC_128K:
+		/* 16k - 1 signature filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K;
+		break;
+	case IXGBE_FDIR_PBALLOC_256K:
+		/* 32k - 1 signature filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K;
+		break;
+	default:
+		/* bad value */
+		return IXGBE_ERR_CONFIG;
+	};
+
+	/* Move the flexible bytes to use the ethertype - shift 6 words */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
+
+	fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
+	                htonl(IXGBE_ATR_BUCKET_HASH_KEY));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
+	                htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		msleep(1);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ *  @hw: pointer to hardware structure
+ *  @pballoc: which mode to allocate filters with
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
+{
+	u32 fdirctrl = 0;
+	u32 pbsize;
+	int i;
+
+	/*
+	 * Before enabling Flow Director, the Rx Packet Buffer size
+	 * must be reduced.  The new value is the current size minus
+	 * flow director memory usage size.
+	 */
+	pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc));
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0),
+	    (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize));
+
+	/*
+	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
+	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * would be bigger than programmed and filter space would run into
+	 * the PB 0 region.
+	 */
+	for (i = 1; i < 8; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+
+	/* Send interrupt when 64 filters are left */
+	fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
+
+	switch (pballoc) {
+	case IXGBE_FDIR_PBALLOC_64K:
+		/* 2k - 1 perfect filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K;
+		break;
+	case IXGBE_FDIR_PBALLOC_128K:
+		/* 4k - 1 perfect filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K;
+		break;
+	case IXGBE_FDIR_PBALLOC_256K:
+		/* 8k - 1 perfect filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K;
+		break;
+	default:
+		/* bad value */
+		return IXGBE_ERR_CONFIG;
+	};
+
+	/* Turn perfect match filtering on */
+	fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH;
+	fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
+
+	/* Move the flexible bytes to use the ethertype - shift 6 words */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
+	                htonl(IXGBE_ATR_BUCKET_HASH_KEY));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
+	                htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+
+	/* Set the maximum length per hash bucket to 0xA filters */
+	fdirctrl |= (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		msleep(1);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		hw_dbg(hw, "Flow Director Perfect poll time exceeded!\n");
+
+	return 0;
+}
+
+
+/**
+ *  ixgbe_atr_compute_hash_82599 - Compute the hashes for SW ATR
+ *  @stream: input bitstream to compute the hash on
+ *  @key: 32-bit hash key
+ **/
+u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input, u32 key)
+{
+	/*
+	 * The algorithm is as follows:
+	 *    Hash[15:0] = Sum { S[n] x K[n+16] }, n = 0...350
+	 *    where Sum {A[n]}, n = 0...n is bitwise XOR of A[0], A[1]...A[n]
+	 *    and A[n] x B[n] is bitwise AND between same length strings
+	 *
+	 *    K[n] is 16 bits, defined as:
+	 *       for n modulo 32 >= 15, K[n] = K[n % 32 : (n % 32) - 15]
+	 *       for n modulo 32 < 15, K[n] =
+	 *             K[(n % 32:0) | (31:31 - (14 - (n % 32)))]
+	 *
+	 *    S[n] is 16 bits, defined as:
+	 *       for n >= 15, S[n] = S[n:n - 15]
+	 *       for n < 15, S[n] = S[(n:0) | (350:350 - (14 - n))]
+	 *
+	 *    To simplify for programming, the algorithm is implemented
+	 *    in software this way:
+	 *
+	 *    Key[31:0], Stream[335:0]
+	 *
+	 *    tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times
+	 *    int_key[350:0] = tmp_key[351:1]
+	 *    int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321]
+	 *
+	 *    hash[15:0] = 0;
+	 *    for (i = 0; i < 351; i++) {
+	 *        if (int_key[i])
+	 *            hash ^= int_stream[(i + 15):i];
+	 *    }
+	 */
+
+	union {
+		u64    fill[6];
+		u32    key[11];
+		u8     key_stream[44];
+	} tmp_key;
+
+	u8   *stream = (u8 *)atr_input;
+	u8   int_key[44];      /* upper-most bit unused */
+	u8   hash_str[46];     /* upper-most 2 bits unused */
+	u16  hash_result = 0;
+	int  i, j, k, h;
+
+	/*
+	 * Initialize the fill member to prevent warnings
+	 * on some compilers
+	 */
+	 tmp_key.fill[0] = 0;
+
+	/* First load the temporary key stream */
+	for (i = 0; i < 6; i++) {
+		u64 fillkey = ((u64)key << 32) | key;
+		tmp_key.fill[i] = fillkey;
+	}
+
+	/*
+	 * Set the interim key for the hashing.  Bit 352 is unused, so we must
+	 * shift and compensate when building the key.
+	 */
+
+	int_key[0] = tmp_key.key_stream[0] >> 1;
+	for (i = 1, j = 0; i < 44; i++) {
+		unsigned int this_key = tmp_key.key_stream[j] << 7;
+		j++;
+		int_key[i] = (u8)(this_key | (tmp_key.key_stream[j] >> 1));
+	}
+
+	/*
+	 * Set the interim bit string for the hashing.  Bits 368 and 367 are
+	 * unused, so shift and compensate when building the string.
+	 */
+	hash_str[0] = (stream[40] & 0x7f) >> 1;
+	for (i = 1, j = 40; i < 46; i++) {
+		unsigned int this_str = stream[j] << 7;
+		j++;
+		if (j > 41)
+			j = 0;
+		hash_str[i] = (u8)(this_str | (stream[j] >> 1));
+	}
+
+	/*
+	 * Now compute the hash.  i is the index into hash_str, j is into our
+	 * key stream, k is counting the number of bits, and h interates within
+	 * each byte.
+	 */
+	for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) {
+		for (h = 0; h < 8 && k < 351; h++, k++) {
+			if (int_key[j] & (1 << h)) {
+				/*
+				 * Key bit is set, XOR in the current 16-bit
+				 * string.  Example of processing:
+				 *    h = 0,
+				 *      tmp = (hash_str[i - 2] & 0 << 16) |
+				 *            (hash_str[i - 1] & 0xff << 8) |
+				 *            (hash_str[i] & 0xff >> 0)
+				 *      So tmp = hash_str[15 + k:k], since the
+				 *      i + 2 clause rolls off the 16-bit value
+				 *    h = 7,
+				 *      tmp = (hash_str[i - 2] & 0x7f << 9) |
+				 *            (hash_str[i - 1] & 0xff << 1) |
+				 *            (hash_str[i] & 0x80 >> 7)
+				 */
+				int tmp = (hash_str[i] >> h);
+				tmp |= (hash_str[i - 1] << (8 - h));
+				tmp |= (int)(hash_str[i - 2] & ((1 << h) - 1))
+				             << (16 - h);
+				hash_result ^= (u16)tmp;
+			}
+		}
+	}
+
+	return hash_result;
+}
+
+/**
+ *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
+ *  @input: input stream to modify
+ *  @vlan: the VLAN id to load
+ **/
+s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
+{
+	input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8;
+	input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
+ *  @input: input stream to modify
+ *  @src_addr: the IP address to load
+ **/
+s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
+{
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24;
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] =
+	                                               (src_addr >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] =
+	                                                (src_addr >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
+ *  @input: input stream to modify
+ *  @dst_addr: the IP address to load
+ **/
+s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
+{
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24;
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] =
+	                                               (dst_addr >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] =
+	                                                (dst_addr >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_src_ipv6_82599 - Sets the source IPv6 address
+ *  @input: input stream to modify
+ *  @src_addr_1: the first 4 bytes of the IP address to load
+ *  @src_addr_2: the second 4 bytes of the IP address to load
+ *  @src_addr_3: the third 4 bytes of the IP address to load
+ *  @src_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 src_addr_1, u32 src_addr_2,
+                                 u32 src_addr_3, u32 src_addr_4)
+{
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET] = src_addr_4 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] =
+	                                               (src_addr_4 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] =
+	                                              (src_addr_4 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] = src_addr_4 >> 24;
+
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4] = src_addr_3 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] =
+	                                               (src_addr_3 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] =
+	                                              (src_addr_3 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] = src_addr_3 >> 24;
+
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8] = src_addr_2 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] =
+	                                               (src_addr_2 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] =
+	                                              (src_addr_2 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] = src_addr_2 >> 24;
+
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12] = src_addr_1 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] =
+	                                               (src_addr_1 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] =
+	                                              (src_addr_1 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] = src_addr_1 >> 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_dst_ipv6_82599 - Sets the destination IPv6 address
+ *  @input: input stream to modify
+ *  @dst_addr_1: the first 4 bytes of the IP address to load
+ *  @dst_addr_2: the second 4 bytes of the IP address to load
+ *  @dst_addr_3: the third 4 bytes of the IP address to load
+ *  @dst_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 dst_addr_1, u32 dst_addr_2,
+                                 u32 dst_addr_3, u32 dst_addr_4)
+{
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET] = dst_addr_4 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] =
+	                                               (dst_addr_4 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] =
+	                                              (dst_addr_4 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] = dst_addr_4 >> 24;
+
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4] = dst_addr_3 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] =
+	                                               (dst_addr_3 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] =
+	                                              (dst_addr_3 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] = dst_addr_3 >> 24;
+
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8] = dst_addr_2 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] =
+	                                               (dst_addr_2 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] =
+	                                              (dst_addr_2 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] = dst_addr_2 >> 24;
+
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12] = dst_addr_1 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] =
+	                                               (dst_addr_1 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] =
+	                                              (dst_addr_1 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] = dst_addr_1 >> 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_src_port_82599 - Sets the source port
+ *  @input: input stream to modify
+ *  @src_port: the source port to load
+ **/
+s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
+{
+	input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8;
+	input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
+ *  @input: input stream to modify
+ *  @dst_port: the destination port to load
+ **/
+s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
+{
+	input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8;
+	input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
+ *  @input: input stream to modify
+ *  @flex_bytes: the flexible bytes to load
+ **/
+s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
+{
+	input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8;
+	input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_vm_pool_82599 - Sets the Virtual Machine pool
+ *  @input: input stream to modify
+ *  @vm_pool: the Virtual Machine pool to load
+ **/
+s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input, u8 vm_pool)
+{
+	input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET] = vm_pool;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
+ *  @input: input stream to modify
+ *  @l4type: the layer 4 type value to load
+ **/
+s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
+{
+	input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
+ *  @input: input stream to search
+ *  @vlan: the VLAN id to load
+ **/
+s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
+{
+	*vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
+	*vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
+ *  @input: input stream to search
+ *  @src_addr: the IP address to load
+ **/
+s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input, u32 *src_addr)
+{
+	*src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET];
+	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8;
+	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16;
+	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
+ *  @input: input stream to search
+ *  @dst_addr: the IP address to load
+ **/
+s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 *dst_addr)
+{
+	*dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET];
+	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8;
+	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16;
+	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
+ *  @input: input stream to search
+ *  @src_addr_1: the first 4 bytes of the IP address to load
+ *  @src_addr_2: the second 4 bytes of the IP address to load
+ *  @src_addr_3: the third 4 bytes of the IP address to load
+ *  @src_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 *src_addr_1, u32 *src_addr_2,
+                                 u32 *src_addr_3, u32 *src_addr_4)
+{
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12];
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8;
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16;
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24;
+
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8];
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8;
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16;
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24;
+
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4];
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8;
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16;
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24;
+
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET];
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8;
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16;
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_dst_ipv6_82599 - Gets the destination IPv6 address
+ *  @input: input stream to search
+ *  @dst_addr_1: the first 4 bytes of the IP address to load
+ *  @dst_addr_2: the second 4 bytes of the IP address to load
+ *  @dst_addr_3: the third 4 bytes of the IP address to load
+ *  @dst_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 *dst_addr_1, u32 *dst_addr_2,
+                                 u32 *dst_addr_3, u32 *dst_addr_4)
+{
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12];
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] << 8;
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] << 16;
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] << 24;
+
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8];
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] << 8;
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] << 16;
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] << 24;
+
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4];
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] << 8;
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] << 16;
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] << 24;
+
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET];
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] << 8;
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] << 16;
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_src_port_82599 - Gets the source port
+ *  @input: input stream to modify
+ *  @src_port: the source port to load
+ *
+ *  Even though the input is given in big-endian, the FDIRPORT registers
+ *  expect the ports to be programmed in little-endian.  Hence the need to swap
+ *  endianness when retrieving the data.  This can be confusing since the
+ *  internal hash engine expects it to be big-endian.
+ **/
+s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input, u16 *src_port)
+{
+	*src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8;
+	*src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_dst_port_82599 - Gets the destination port
+ *  @input: input stream to modify
+ *  @dst_port: the destination port to load
+ *
+ *  Even though the input is given in big-endian, the FDIRPORT registers
+ *  expect the ports to be programmed in little-endian.  Hence the need to swap
+ *  endianness when retrieving the data.  This can be confusing since the
+ *  internal hash engine expects it to be big-endian.
+ **/
+s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input, u16 *dst_port)
+{
+	*dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8;
+	*dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
+ *  @input: input stream to modify
+ *  @flex_bytes: the flexible bytes to load
+ **/
+s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input, u16 *flex_byte)
+{
+	*flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET];
+	*flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_vm_pool_82599 - Gets the Virtual Machine pool
+ *  @input: input stream to modify
+ *  @vm_pool: the Virtual Machine pool to load
+ **/
+s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input, u8 *vm_pool)
+{
+	*vm_pool = input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
+ *  @input: input stream to modify
+ *  @l4type: the layer 4 type value to load
+ **/
+s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input, u8 *l4type)
+{
+	*l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ *  @hw: pointer to hardware structure
+ *  @stream: input bitstream
+ *  @queue: queue index to direct traffic to
+ **/
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+                                          struct ixgbe_atr_input *input,
+                                          u8 queue)
+{
+	u64  fdirhashcmd;
+	u64  fdircmd;
+	u32  fdirhash;
+	u16  bucket_hash, sig_hash;
+	u8   l4type;
+
+	bucket_hash = ixgbe_atr_compute_hash_82599(input,
+	                                           IXGBE_ATR_BUCKET_HASH_KEY);
+
+	/* bucket_hash is only 15 bits */
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	sig_hash = ixgbe_atr_compute_hash_82599(input,
+	                                        IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+	/* Get the l4type in order to program FDIRCMD properly */
+	/* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */
+	ixgbe_atr_get_l4type_82599(input, &l4type);
+
+	/*
+	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 */
+	fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
+
+	fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+	           IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN);
+
+	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
+	case IXGBE_ATR_L4TYPE_TCP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
+		break;
+	case IXGBE_ATR_L4TYPE_UDP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
+		break;
+	case IXGBE_ATR_L4TYPE_SCTP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+		break;
+	default:
+		hw_dbg(hw, "Error on l4type input\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK)
+		fdircmd |= IXGBE_FDIRCMD_IPV6;
+
+	fdircmd |= ((u64)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT);
+	fdirhashcmd = ((fdircmd << 32) | fdirhash);
+
+	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
+ *  @hw: pointer to hardware structure
+ *  @input: input bitstream
+ *  @queue: queue index to direct traffic to
+ *
+ *  Note that the caller to this function must lock before calling, since the
+ *  hardware writes must be protected from one another.
+ **/
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+                                        struct ixgbe_atr_input *input,
+                                        u16 soft_id,
+                                        u8 queue)
+{
+	u32 fdircmd = 0;
+	u32 fdirhash;
+	u32 src_ipv4, dst_ipv4;
+	u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
+	u16 src_port, dst_port, vlan_id, flex_bytes;
+	u16 bucket_hash;
+	u8  l4type;
+
+	/* Get our input values */
+	ixgbe_atr_get_l4type_82599(input, &l4type);
+
+	/*
+	 * Check l4type formatting, and bail out before we touch the hardware
+	 * if there's a configuration issue
+	 */
+	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
+	case IXGBE_ATR_L4TYPE_TCP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
+		break;
+	case IXGBE_ATR_L4TYPE_UDP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
+		break;
+	case IXGBE_ATR_L4TYPE_SCTP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+		break;
+	default:
+		hw_dbg(hw, "Error on l4type input\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	bucket_hash = ixgbe_atr_compute_hash_82599(input,
+	                                           IXGBE_ATR_BUCKET_HASH_KEY);
+
+	/* bucket_hash is only 15 bits */
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
+	ixgbe_atr_get_src_port_82599(input, &src_port);
+	ixgbe_atr_get_dst_port_82599(input, &dst_port);
+	ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
+
+	fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
+
+	/* Now figure out if we're IPv4 or IPv6 */
+	if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
+		/* IPv6 */
+		ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
+	                                     &src_ipv6_3, &src_ipv6_4);
+
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
+		/* The last 4 bytes is the same register as IPv4 */
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
+
+		fdircmd |= IXGBE_FDIRCMD_IPV6;
+		fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
+	} else {
+		/* IPv4 */
+		ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
+
+	}
+
+	ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
+	                            (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
+	                       (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
+
+	fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
+	fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
+	fdircmd |= IXGBE_FDIRCMD_LAST;
+	fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+
+	return 0;
+}
+/**
  *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
  *  @hw: pointer to hardware structure
  *  @reg: analog register to read
@@ -1056,8 +2142,9 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
 s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
 {
 	u32 q_num;
+	s32 ret_val;
 
-	ixgbe_start_hw_generic(hw);
+	ret_val = ixgbe_start_hw_generic(hw);
 
 	/* Clear the rate limiters */
 	for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) {
@@ -1066,7 +2153,13 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
-	return 0;
+	/* We need to run link autotry after the driver loads */
+	hw->mac.autotry_restart = true;
+
+	if (ret_val == 0)
+		ret_val = ixgbe_verify_fw_version_82599(hw);
+
+	return ret_val;
 }
 
 /**
@@ -1093,53 +2186,100 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
 	u8 comp_codes_10g = 0;
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599:
-	case IXGBE_DEV_ID_82599_KX4:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
+	hw->phy.ops.identify(hw);
+
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+				     &ext_ability);
+		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+			goto out;
+		} else
+			/* SFI mode so read SFP module */
+			goto sfp_check;
 		break;
-	case IXGBE_DEV_ID_82599_SFP:
-		hw->phy.ops.identify_sfp(hw);
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
+		goto out;
+		break;
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+			goto out;
+		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+		goto out;
+		break;
+	default:
+		goto out;
+		break;
+	}
 
-		switch (hw->phy.sfp_type) {
-		case ixgbe_sfp_type_da_cu:
-		case ixgbe_sfp_type_da_cu_core0:
-		case ixgbe_sfp_type_da_cu_core1:
-			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-			break;
-		case ixgbe_sfp_type_sr:
+sfp_check:
+	/* SFP check must be done last since DA modules are sometimes used to
+	 * test KR mode -  we need to id KR mode correctly before SFP module.
+	 * Call identify_sfp because the pluggable module may have changed */
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		goto out;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tw_tyco:
+	case ixgbe_phy_tw_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			break;
-		case ixgbe_sfp_type_lr:
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			break;
-		case ixgbe_sfp_type_srlr_core0:
-		case ixgbe_sfp_type_srlr_core1:
-			hw->phy.ops.read_i2c_eeprom(hw,
-			                            IXGBE_SFF_10GBE_COMP_CODES,
-			                            &comp_codes_10g);
-			if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			else
-				physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-		default:
-			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-			break;
-		}
 		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 
@@ -1187,6 +2327,138 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
 	return 0;
 }
 
+/**
+ *  ixgbe_get_device_caps_82599 - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599
+ *  @hw: pointer to hardware structure
+ *  @san_mac_offset: SAN MAC address offset
+ *
+ *  This function will read the EEPROM location for the SAN MAC address
+ *  pointer, and returns the value at that location.  This is used in both
+ *  get and set mac_addr routines.
+ **/
+s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
+                                        u16 *san_mac_offset)
+{
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.
+	 */
+	hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ *  set_lan_id() is called by identify_sfp(), but this cannot be relied
+ *  upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	u16 san_mac_data, san_mac_offset;
+	u8 i;
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.  If they're not, no point in calling set_lan_id() here.
+	 */
+	ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset);
+
+	if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
+		/*
+		 * No addresses available in this EEPROM.  It's not an
+		 * error though, so just wipe the local address and return.
+		 */
+		for (i = 0; i < 6; i++)
+			san_mac_addr[i] = 0xFF;
+
+		goto san_mac_addr_out;
+	}
+
+	/* make sure we know which port we need to program */
+	hw->mac.ops.set_lan_id(hw);
+	/* apply the port offset to the address offset */
+	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+	                 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+	for (i = 0; i < 3; i++) {
+		hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
+		san_mac_addr[i * 2] = (u8)(san_mac_data);
+		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+		san_mac_offset++;
+	}
+
+san_mac_addr_out:
+	return 0;
+}
+
+/**
+ *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ *  @hw: pointer to hardware structure
+ *
+ *  Verifies that installed the firmware version is 0.6 or higher
+ *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ *  Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ *  if the FW version is not supported.
+ **/
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM_VERSION;
+	u16 fw_offset, fw_ptp_cfg_offset;
+	u16 fw_version = 0;
+
+	/* firmware check is only necessary for SFI devices */
+	if (hw->phy.media_type != ixgbe_media_type_fiber) {
+		status = 0;
+		goto fw_version_out;
+	}
+
+	/* get the offset to the Firmware Module block */
+	hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the offset to the Pass Through Patch Configuration block */
+	hw->eeprom.ops.read(hw, (fw_offset +
+	                         IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+	                         &fw_ptp_cfg_offset);
+
+	if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the firmware version */
+	hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+	                         IXGBE_FW_PATCH_VERSION_4),
+	                         &fw_version);
+
+	if (fw_version > 0x5)
+		status = 0;
+
+fw_version_out:
+	return status;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -1196,6 +2468,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_82599,
+	.get_device_caps        = &ixgbe_get_device_caps_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
@@ -1220,7 +2494,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.disable_mc             = &ixgbe_disable_mc_generic,
 	.clear_vfta             = &ixgbe_clear_vfta_82599,
 	.set_vfta               = &ixgbe_set_vfta_82599,
-	.setup_fc               = &ixgbe_setup_fc_generic,
+	.fc_enable               = &ixgbe_fc_enable_generic,
 	.init_uta_tables        = &ixgbe_init_uta_tables_82599,
 	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
 };
@@ -1236,6 +2510,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 static struct ixgbe_phy_operations phy_ops_82599 = {
 	.identify               = &ixgbe_identify_phy_82599,
 	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82599,
 	.reset                  = &ixgbe_reset_phy_generic,
 	.read_reg               = &ixgbe_read_phy_reg_generic,
 	.write_reg              = &ixgbe_write_phy_reg_generic,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 186a65069b3..96a18595377 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -28,6 +28,8 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
@@ -71,12 +73,6 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 	/* Identify the PHY */
 	hw->phy.ops.identify(hw);
 
-	/*
-	 * Store MAC address from RAR0, clear receive address registers, and
-	 * clear the multicast table
-	 */
-	hw->mac.ops.init_rx_addrs(hw);
-
 	/* Clear the VLAN filter table */
 	hw->mac.ops.clear_vfta(hw);
 
@@ -89,6 +85,9 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
 	IXGBE_WRITE_FLUSH(hw);
 
+	/* Setup flow control */
+	ixgbe_setup_fc(hw, 0);
+
 	/* Clear adapter stopped flag */
 	hw->adapter_stopped = false;
 
@@ -107,13 +106,17 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
  **/
 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
 {
+	s32 status;
+
 	/* Reset the hardware */
-	hw->mac.ops.reset_hw(hw);
+	status = hw->mac.ops.reset_hw(hw);
 
-	/* Start the HW */
-	hw->mac.ops.start_hw(hw);
+	if (status == 0) {
+		/* Start the HW */
+		status = hw->mac.ops.start_hw(hw);
+	}
 
-	return 0;
+	return status;
 }
 
 /**
@@ -1362,15 +1365,14 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
  *  Drivers using secondary unicast addresses must set user_set_promisc when
  *  manually putting the device into promiscuous mode.
  **/
-s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
-                              u32 addr_count, ixgbe_mc_addr_itr next)
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
+				      struct list_head *uc_list)
 {
-	u8 *addr;
 	u32 i;
 	u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
 	u32 uc_addr_in_use;
 	u32 fctrl;
-	u32 vmdq;
+	struct netdev_hw_addr *ha;
 
 	/*
 	 * Clear accounting of old secondary address list,
@@ -1388,10 +1390,9 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
 	}
 
 	/* Add the new addresses */
-	for (i = 0; i < addr_count; i++) {
+	list_for_each_entry(ha, uc_list, list) {
 		hw_dbg(hw, " Adding the secondary addresses:\n");
-		addr = next(hw, &addr_list, &vmdq);
-		ixgbe_add_uc_addr(hw, addr, vmdq);
+		ixgbe_add_uc_addr(hw, ha->addr, 0);
 	}
 
 	if (hw->addr_ctrl.overflow_promisc) {
@@ -1583,19 +1584,30 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_fc_enable - Enable flow control
+ *  ixgbe_fc_enable_generic - Enable flow control
  *  @hw: pointer to hardware structure
  *  @packetbuf_num: packet buffer number (0-7)
  *
  *  Enable flow control according to the current settings.
  **/
-s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 {
 	s32 ret_val = 0;
-	u32 mflcn_reg;
-	u32 fccfg_reg;
+	u32 mflcn_reg, fccfg_reg;
 	u32 reg;
+	u32 rx_pba_size;
 
+#ifdef CONFIG_DCB
+	if (hw->fc.requested_mode == ixgbe_fc_pfc)
+		goto out;
+
+#endif /* CONFIG_DCB */
+	/* Negotiate the fc mode to use */
+	ret_val = ixgbe_fc_autoneg(hw);
+	if (ret_val)
+		goto out;
+
+	/* Disable any previous flow control settings */
 	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
 	mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
 
@@ -1615,7 +1627,10 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
 	 */
 	switch (hw->fc.current_mode) {
 	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
 		break;
 	case ixgbe_fc_rx_pause:
 		/*
@@ -1644,7 +1659,7 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
 	case ixgbe_fc_pfc:
 		goto out;
 		break;
-#endif
+#endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = -IXGBE_ERR_CONFIG;
@@ -1652,25 +1667,48 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
 		break;
 	}
 
-	/* Enable 802.3x based flow control settings. */
+	/* Set 802.3x based flow control settings. */
+	mflcn_reg |= IXGBE_MFLCN_DPF;
 	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
 	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
 
-	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
-	if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
-		if (hw->fc.send_xon)
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
-			                (hw->fc.low_water | IXGBE_FCRTL_XONE));
-		else
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
-			                hw->fc.low_water);
+	reg = IXGBE_READ_REG(hw, IXGBE_MTQC);
+	/* Thresholds are different for link flow control when in DCB mode */
+	if (reg & IXGBE_MTQC_RT_ENA) {
+		rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+
+		/* Always disable XON for LFC when in DCB mode */
+		reg = (rx_pba_size >> 5) & 0xFFE0;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), reg);
+
+		reg = (rx_pba_size >> 2) & 0xFFE0;
+		if (hw->fc.current_mode & ixgbe_fc_tx_pause)
+			reg |= IXGBE_FCRTH_FCEN;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), reg);
+	} else {
+		/*
+		 * Set up and enable Rx high/low water mark thresholds,
+		 * enable XON.
+		 */
+		if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+			if (hw->fc.send_xon) {
+				IXGBE_WRITE_REG(hw,
+				              IXGBE_FCRTL_82599(packetbuf_num),
+			                      (hw->fc.low_water |
+				              IXGBE_FCRTL_XONE));
+			} else {
+				IXGBE_WRITE_REG(hw,
+				              IXGBE_FCRTL_82599(packetbuf_num),
+				              hw->fc.low_water);
+			}
 
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
-		                (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
+			               (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+		}
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num));
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
 	if ((packetbuf_num & 1) == 0)
 		reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
 	else
@@ -1687,100 +1725,41 @@ out:
  *  ixgbe_fc_autoneg - Configure flow control
  *  @hw: pointer to hardware structure
  *
- *  Negotiates flow control capabilities with link partner using autoneg and
- *  applies the results.
+ *  Compares our advertised flow control capabilities to those advertised by
+ *  our link partner, and determines the proper flow control mode to use.
  **/
 s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 {
 	s32 ret_val = 0;
-	u32 i, reg, pcs_anadv_reg, pcs_lpab_reg;
-
-	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+	ixgbe_link_speed speed;
+	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	bool link_up;
 
 	/*
-	 * The possible values of fc.current_mode are:
-	 * 0:  Flow control is completely disabled
-	 * 1:  Rx flow control is enabled (we can receive pause frames,
-	 *     but not send pause frames).
-	 * 2:  Tx flow control is enabled (we can send pause frames but
-	 *     we do not support receiving pause frames).
-	 * 3:  Both Rx and Tx flow control (symmetric) are enabled.
-	 * 4:  Priority Flow Control is enabled.
-	 * other: Invalid.
+	 * AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - we don't have multispeed fiber, or if
+	 * - we're not running at 1G, or if
+	 * - link is not up, or if
+	 * - link is up but AN did not complete, or if
+	 * - link is up and AN completed but timed out
+	 *
+	 * Since we're being called from an LSC, link is already know to be up.
+	 * So use link_up_wait_to_complete=false.
 	 */
-	switch (hw->fc.current_mode) {
-	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
-		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
-		break;
-	case ixgbe_fc_rx_pause:
-		/*
-		 * Rx Flow control is enabled and Tx Flow control is
-		 * disabled by software override. Since there really
-		 * isn't a way to advertise that we are capable of RX
-		 * Pause ONLY, we will advertise that we support both
-		 * symmetric and asymmetric Rx PAUSE.  Later, we will
-		 * disable the adapter's ability to send PAUSE frames.
-		 */
-		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
-		break;
-	case ixgbe_fc_tx_pause:
-		/*
-		 * Tx Flow control is enabled, and Rx Flow control is
-		 * disabled by software override.
-		 */
-		reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
-		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
-		break;
-	case ixgbe_fc_full:
-		/* Flow control (both Rx and Tx) is enabled by SW override. */
-		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
-		break;
-#ifdef CONFIG_DCB
-	case ixgbe_fc_pfc:
-		goto out;
-		break;
-#endif
-	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
-		goto out;
-		break;
-	}
-
-	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
-	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
-
-	/* Set PCS register for autoneg */
-	/* Enable and restart autoneg */
-	reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
-	/* Disable AN timeout */
-	if (hw->fc.strict_ieee)
-		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
-
-	hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);
-	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
-
-	/* See if autonegotiation has succeeded */
-	hw->mac.autoneg_succeeded = 0;
-	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
-		msleep(10);
-		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-		if ((reg & (IXGBE_PCS1GLSTA_LINK_OK |
-		     IXGBE_PCS1GLSTA_AN_COMPLETE)) ==
-		    (IXGBE_PCS1GLSTA_LINK_OK |
-		     IXGBE_PCS1GLSTA_AN_COMPLETE)) {
-			if (!(reg & IXGBE_PCS1GLSTA_AN_TIMED_OUT))
-				hw->mac.autoneg_succeeded = 1;
-			break;
-		}
-	}
-
-	if (!hw->mac.autoneg_succeeded) {
-		/* Autoneg failed to achieve a link, so we turn fc off */
-		hw->fc.current_mode = ixgbe_fc_none;
-		hw_dbg(hw, "Flow Control = NONE.\n");
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+
+	if (hw->fc.disable_fc_autoneg ||
+	    !hw->phy.multispeed_fiber ||
+	    (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
+	    !link_up ||
+	    ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+	    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+		hw_dbg(hw, "Autoneg FC was skipped.\n");
 		goto out;
 	}
 
@@ -1823,21 +1802,23 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow Control = NONE.\n");
 	}
 
+	/* Record that current_mode is the result of a successful autoneg */
+	hw->fc.fc_was_autonegged = true;
+
 out:
 	return ret_val;
 }
 
 /**
- *  ixgbe_setup_fc_generic - Set up flow control
+ *  ixgbe_setup_fc - Set up flow control
  *  @hw: pointer to hardware structure
  *
- *  Sets up flow control.
+ *  Called at init time to set up flow control.
  **/
-s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 {
 	s32 ret_val = 0;
-	ixgbe_link_speed speed;
-	bool link_up;
+	u32 reg;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc) {
@@ -1866,7 +1847,7 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 
 	/*
 	 * Validate the requested mode.  Strict IEEE mode does not allow
-	 * ixgbe_fc_rx_pause because it will cause testing anomalies.
+	 * ixgbe_fc_rx_pause because it will cause us to fail at UNH.
 	 */
 	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
 		hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict "
@@ -1883,21 +1864,77 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 		hw->fc.requested_mode = ixgbe_fc_full;
 
 	/*
-	 * Save off the requested flow control mode for use later.  Depending
-	 * on the link partner's capabilities, we may or may not use this mode.
+	 * Set up the 1G flow control advertisement registers so the HW will be
+	 * able to do fc autoneg once the cable is plugged in.  If we end up
+	 * using 10g instead, this is harmless.
 	 */
-	hw->fc.current_mode = hw->fc.requested_mode;
-
-	/* Decide whether to use autoneg or not. */
-	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-	if (!hw->fc.disable_fc_autoneg && hw->phy.multispeed_fiber &&
-	    (speed == IXGBE_LINK_SPEED_1GB_FULL))
-		ret_val = ixgbe_fc_autoneg(hw);
+	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
 
-	if (ret_val)
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
+	 * 4: Priority Flow Control is enabled.
+#endif
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
+		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		break;
+#ifdef CONFIG_DCB
+	case ixgbe_fc_pfc:
+		goto out;
+		break;
+#endif /* CONFIG_DCB */
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		ret_val = -IXGBE_ERR_CONFIG;
 		goto out;
+		break;
+	}
 
-	ret_val = ixgbe_fc_enable(hw, packetbuf_num);
+	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+
+	/* Enable and restart autoneg to inform the link partner */
+	reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
+
+	/* Disable AN timeout */
+	if (hw->fc.strict_ieee)
+		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+
+	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+	hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
 
 out:
 	return ret_val;
@@ -2044,6 +2081,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
 
 	if (!link_up) {
+		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 		autoc_reg |= IXGBE_AUTOC_FLU;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
 		msleep(10);
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index dd260890ad0..0d34d4d8244 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -59,13 +59,13 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
 s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
                                       u32 mc_addr_count,
                                       ixgbe_mc_addr_itr func);
-s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
-                                      u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
+				      struct list_head *uc_list);
 s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num);
-s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packtetbuf_num);
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
 s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
 
 s32 ixgbe_validate_mac_addr(u8 *mac_addr);
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index 62206273d88..f30263898eb 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -294,6 +294,9 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw,
 	u32 reg, rx_pba_size;
 	u8  i;
 
+	if (!dcb_config->pfc_mode_enable)
+		goto out;
+
 	/* Enable Transmit Priority Flow Control */
 	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
 	reg &= ~IXGBE_RMCS_TFCE_802_3X;
@@ -341,6 +344,7 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw,
 	/* Configure flow control refresh threshold value */
 	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400);
 
+out:
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index f4417fc3b0f..589f62c7062 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -295,7 +295,7 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw,
 	/* If PFC is disabled globally then fall back to LFC. */
 	if (!dcb_config->pfc_mode_enable) {
 		for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
-			hw->mac.ops.setup_fc(hw, i);
+			hw->mac.ops.fc_enable(hw, i);
 		goto out;
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index bd0a0c27695..d56890f5c9d 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -28,15 +28,22 @@
 
 #include "ixgbe.h"
 #include <linux/dcbnl.h>
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
 
 /* Callbacks for DCB netlink in the kernel */
 #define BIT_DCB_MODE	0x01
 #define BIT_PFC		0x02
 #define BIT_PG_RX	0x04
 #define BIT_PG_TX	0x08
-#define BIT_BCN         0x10
+#define BIT_RESETLINK   0x40
 #define BIT_LINKSPEED   0x80
 
+/* Responses for the DCB_C_SET_ALL command */
+#define DCB_HW_CHG_RST  0  /* DCB configuration changed with reset */
+#define DCB_NO_HW_CHG   1  /* DCB configuration did not change */
+#define DCB_HW_CHG      2  /* DCB configuration changed, no reset */
+
 int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
                        struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max)
 {
@@ -124,15 +131,12 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_stop(netdev);
-		ixgbe_reset_interrupt_capability(adapter);
-		ixgbe_napi_del_all(adapter);
-		INIT_LIST_HEAD(&netdev->napi_list);
-		kfree(adapter->tx_ring);
-		kfree(adapter->rx_ring);
-		adapter->tx_ring = NULL;
-		adapter->rx_ring = NULL;
+		ixgbe_clear_interrupt_scheme(adapter);
 
-		adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+			adapter->hw.fc.requested_mode = ixgbe_fc_none;
+		}
 		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
 		ixgbe_init_interrupt_scheme(adapter);
@@ -141,17 +145,13 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 	} else {
 		/* Turn off DCB */
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			adapter->hw.fc.requested_mode = ixgbe_fc_default;
 			if (netif_running(netdev))
 				netdev->netdev_ops->ndo_stop(netdev);
-			ixgbe_reset_interrupt_capability(adapter);
-			ixgbe_napi_del_all(adapter);
-			INIT_LIST_HEAD(&netdev->napi_list);
-			kfree(adapter->tx_ring);
-			kfree(adapter->rx_ring);
-			adapter->tx_ring = NULL;
-			adapter->rx_ring = NULL;
+			ixgbe_clear_interrupt_scheme(adapter);
 
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+			adapter->temp_dcb_cfg.pfc_mode_enable = false;
+			adapter->dcb_cfg.pfc_mode_enable = false;
 			adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
 			ixgbe_init_interrupt_scheme(adapter);
@@ -167,10 +167,15 @@ static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
 					 u8 *perm_addr)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	int i;
+	int i, j;
 
 	for (i = 0; i < netdev->addr_len; i++)
 		perm_addr[i] = adapter->hw.mac.perm_addr[i];
+
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		for (j = 0; j < netdev->addr_len; j++, i++)
+			perm_addr[i] = adapter->hw.mac.san_addr[j];
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
@@ -197,8 +202,10 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent !=
 	     adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) ||
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap !=
-	     adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap))
+	     adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap)) {
 		adapter->dcb_set_bitmap |= BIT_PG_TX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
@@ -209,8 +216,10 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
 	adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct;
 
 	if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
-	    adapter->dcb_cfg.bw_percentage[0][bwg_id])
+	    adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
 		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
@@ -237,8 +246,10 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent !=
 	     adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) ||
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap !=
-	     adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap))
+	     adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap)) {
 		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
@@ -249,8 +260,10 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
 	adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct;
 
 	if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] !=
-	    adapter->dcb_cfg.bw_percentage[1][bwg_id])
+	    adapter->dcb_cfg.bw_percentage[1][bwg_id]) {
 		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc,
@@ -319,28 +332,60 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	int ret;
 
-	adapter->dcb_set_bitmap &= ~BIT_BCN;	/* no set for BCN */
 	if (!adapter->dcb_set_bitmap)
-		return 1;
+		return DCB_NO_HW_CHG;
 
-	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
-		msleep(1);
+	/*
+	 * Only take down the adapter if the configuration change
+	 * requires a reset.
+	 */
+	if (adapter->dcb_set_bitmap & BIT_RESETLINK) {
+		while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+			msleep(1);
 
-	if (netif_running(netdev))
-		ixgbe_down(adapter);
+		if (netif_running(netdev))
+			ixgbe_down(adapter);
+	}
 
 	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
 				 adapter->ring_feature[RING_F_DCB].indices);
 	if (ret) {
-		clear_bit(__IXGBE_RESETTING, &adapter->state);
-		return ret;
+		if (adapter->dcb_set_bitmap & BIT_RESETLINK)
+			clear_bit(__IXGBE_RESETTING, &adapter->state);
+		return DCB_NO_HW_CHG;
+	}
+
+	if (adapter->dcb_cfg.pfc_mode_enable) {
+		if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
+			(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
+			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+		adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
+	} else {
+		if (adapter->hw.mac.type != ixgbe_mac_82598EB)
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+		else
+			adapter->hw.fc.requested_mode = ixgbe_fc_none;
 	}
 
-	if (netif_running(netdev))
-		ixgbe_up(adapter);
+	if (adapter->dcb_set_bitmap & BIT_RESETLINK) {
+		if (netif_running(netdev))
+			ixgbe_up(adapter);
+		ret = DCB_HW_CHG_RST;
+	} else if (adapter->dcb_set_bitmap & BIT_PFC) {
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+			ixgbe_dcb_config_pfc_82598(&adapter->hw,
+			                           &adapter->dcb_cfg);
+		else if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			ixgbe_dcb_config_pfc_82599(&adapter->hw,
+			                           &adapter->dcb_cfg);
+		ret = DCB_HW_CHG;
+	}
+	if (adapter->dcb_cfg.pfc_mode_enable)
+		adapter->hw.fc.current_mode = ixgbe_fc_pfc;
 
+	if (adapter->dcb_set_bitmap & BIT_RESETLINK)
+		clear_bit(__IXGBE_RESETTING, &adapter->state);
 	adapter->dcb_set_bitmap = 0x00;
-	clear_bit(__IXGBE_RESETTING, &adapter->state);
 	return ret;
 }
 
@@ -416,11 +461,17 @@ static u8 ixgbe_dcbnl_getpfcstate(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-	return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
+	return adapter->dcb_cfg.pfc_mode_enable;
 }
 
 static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
 {
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->temp_dcb_cfg.pfc_mode_enable = state;
+	if (adapter->temp_dcb_cfg.pfc_mode_enable !=
+		adapter->dcb_cfg.pfc_mode_enable)
+		adapter->dcb_set_bitmap |= BIT_PFC;
 	return;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index f0a20facc65..86f4f3e36f2 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -67,6 +67,9 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"rx_over_errors", IXGBE_STAT(net_stats.rx_over_errors)},
 	{"rx_crc_errors", IXGBE_STAT(net_stats.rx_crc_errors)},
 	{"rx_frame_errors", IXGBE_STAT(net_stats.rx_frame_errors)},
+	{"hw_rsc_count", IXGBE_STAT(rsc_count)},
+	{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
+	{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
 	{"rx_fifo_errors", IXGBE_STAT(net_stats.rx_fifo_errors)},
 	{"rx_missed_errors", IXGBE_STAT(net_stats.rx_missed_errors)},
 	{"tx_aborted_errors", IXGBE_STAT(net_stats.tx_aborted_errors)},
@@ -90,6 +93,14 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
 	{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
 	{"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
+#ifdef IXGBE_FCOE
+	{"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
+	{"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
+	{"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)},
+	{"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)},
+	{"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)},
+	{"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)},
+#endif /* IXGBE_FCOE */
 };
 
 #define IXGBE_QUEUE_STATS_LEN \
@@ -109,6 +120,13 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
                          IXGBE_PB_STATS_LEN + \
                          IXGBE_QUEUE_STATS_LEN)
 
+static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)", "Eeprom test    (offline)",
+	"Interrupt test (offline)", "Loopback test  (offline)",
+	"Link test   (on/offline)"
+};
+#define IXGBE_TEST_LEN sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN
+
 static int ixgbe_get_settings(struct net_device *netdev,
                               struct ethtool_cmd *ecmd)
 {
@@ -120,11 +138,12 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	ecmd->supported = SUPPORTED_10000baseT_Full;
 	ecmd->autoneg = AUTONEG_ENABLE;
 	ecmd->transceiver = XCVR_EXTERNAL;
-	if (hw->phy.media_type == ixgbe_media_type_copper) {
+	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+	    (hw->mac.type == ixgbe_mac_82599EB)) {
 		ecmd->supported |= (SUPPORTED_1000baseT_Full |
-		                    SUPPORTED_TP | SUPPORTED_Autoneg);
+		                    SUPPORTED_Autoneg);
 
-		ecmd->advertising = (ADVERTISED_TP | ADVERTISED_Autoneg);
+		ecmd->advertising = ADVERTISED_Autoneg;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
 			ecmd->advertising |= ADVERTISED_10000baseT_Full;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
@@ -139,7 +158,15 @@ static int ixgbe_get_settings(struct net_device *netdev,
 			ecmd->advertising |= (ADVERTISED_10000baseT_Full |
 					      ADVERTISED_1000baseT_Full);
 
-		ecmd->port = PORT_TP;
+		if (hw->phy.media_type == ixgbe_media_type_copper) {
+			ecmd->supported |= SUPPORTED_TP;
+			ecmd->advertising |= ADVERTISED_TP;
+			ecmd->port = PORT_TP;
+		} else {
+			ecmd->supported |= SUPPORTED_FIBRE;
+			ecmd->advertising |= ADVERTISED_FIBRE;
+			ecmd->port = PORT_FIBRE;
+		}
 	} else if (hw->phy.media_type == ixgbe_media_type_backplane) {
 		/* Set as FIBRE until SERDES defined in kernel */
 		switch (hw->device_id) {
@@ -187,16 +214,10 @@ static int ixgbe_set_settings(struct net_device *netdev,
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 advertised, old;
-	s32 err;
+	s32 err = 0;
 
-	switch (hw->phy.media_type) {
-	case ixgbe_media_type_fiber:
-		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
-		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
-			return -EINVAL;
-		/* in this case we currently only support 10Gb/FULL */
-		break;
-	case ixgbe_media_type_copper:
+	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+	    (hw->mac.type == ixgbe_mac_82599EB)) {
 		/* 10000/copper and 1000/copper must autoneg
 		 * this function does not support any duplex forcing, but can
 		 * limit the advertising of the adapter to only 10000 or 1000 */
@@ -212,20 +233,23 @@ static int ixgbe_set_settings(struct net_device *netdev,
 			advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 
 		if (old == advertised)
-			break;
+			return err;
 		/* this sets the link speed and restarts auto-neg */
+		hw->mac.autotry_restart = true;
 		err = hw->mac.ops.setup_link_speed(hw, advertised, true, true);
 		if (err) {
 			DPRINTK(PROBE, INFO,
 			        "setup link failed with code %d\n", err);
 			hw->mac.ops.setup_link_speed(hw, old, true, true);
 		}
-		break;
-	default:
-		break;
+	} else {
+		/* in this case we currently only support 10Gb/FULL */
+		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+			return -EINVAL;
 	}
 
-	return 0;
+	return err;
 }
 
 static void ixgbe_get_pauseparam(struct net_device *netdev,
@@ -245,6 +269,13 @@ static void ixgbe_get_pauseparam(struct net_device *netdev,
 	else
 		pause->autoneg = 1;
 
+#ifdef CONFIG_DCB
+	if (hw->fc.current_mode == ixgbe_fc_pfc) {
+		pause->rx_pause = 0;
+		pause->tx_pause = 0;
+	}
+
+#endif
 	if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
 		pause->rx_pause = 1;
 	} else if (hw->fc.current_mode == ixgbe_fc_tx_pause) {
@@ -260,24 +291,46 @@ static int ixgbe_set_pauseparam(struct net_device *netdev,
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_fc_info fc;
+
+#ifdef CONFIG_DCB
+	if (adapter->dcb_cfg.pfc_mode_enable ||
+		((hw->mac.type == ixgbe_mac_82598EB) &&
+		(adapter->flags & IXGBE_FLAG_DCB_ENABLED)))
+		return -EINVAL;
+
+#endif
+
+	fc = hw->fc;
 
 	if (pause->autoneg != AUTONEG_ENABLE)
-		hw->fc.disable_fc_autoneg = true;
+		fc.disable_fc_autoneg = true;
 	else
-		hw->fc.disable_fc_autoneg = false;
+		fc.disable_fc_autoneg = false;
 
 	if (pause->rx_pause && pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_full;
+		fc.requested_mode = ixgbe_fc_full;
 	else if (pause->rx_pause && !pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_rx_pause;
+		fc.requested_mode = ixgbe_fc_rx_pause;
 	else if (!pause->rx_pause && pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_tx_pause;
+		fc.requested_mode = ixgbe_fc_tx_pause;
 	else if (!pause->rx_pause && !pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_none;
+		fc.requested_mode = ixgbe_fc_none;
 	else
 		return -EINVAL;
 
-	hw->mac.ops.setup_fc(hw, 0);
+#ifdef CONFIG_DCB
+	adapter->last_lfc_mode = fc.requested_mode;
+#endif
+
+	/* if the thing changed then we'll update and use new autoneg */
+	if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) {
+		hw->fc = fc;
+		if (netif_running(netdev))
+			ixgbe_reinit_locked(adapter);
+		else
+			ixgbe_reset(adapter);
+	}
 
 	return 0;
 }
@@ -311,10 +364,17 @@ static u32 ixgbe_get_tx_csum(struct net_device *netdev)
 
 static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data)
 {
-	if (data)
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (data) {
 		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-	else
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			netdev->features |= NETIF_F_SCTP_CSUM;
+	} else {
 		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			netdev->features &= ~NETIF_F_SCTP_CSUM;
+	}
 
 	return 0;
 }
@@ -710,6 +770,7 @@ static void ixgbe_get_drvinfo(struct net_device *netdev,
 	strncpy(drvinfo->fw_version, firmware_version, 32);
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 	drvinfo->n_stats = IXGBE_STATS_LEN;
+	drvinfo->testinfo_len = IXGBE_TEST_LEN;
 	drvinfo->regdump_len = ixgbe_get_regs_len(netdev);
 }
 
@@ -781,7 +842,6 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 				}
 				goto err_setup;
 			}
-			temp_tx_ring[i].v_idx = adapter->tx_ring[i].v_idx;
 		}
 		need_update = true;
 	}
@@ -811,7 +871,6 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 				}
 				goto err_setup;
 			}
-			temp_rx_ring[i].v_idx = adapter->rx_ring[i].v_idx;
 		}
 		need_update = true;
 	}
@@ -851,6 +910,8 @@ err_setup:
 static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
 {
 	switch (sset) {
+	case ETH_SS_TEST:
+		return IXGBE_TEST_LEN;
 	case ETH_SS_STATS:
 		return IXGBE_STATS_LEN;
 	default:
@@ -905,6 +966,10 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
 	int i;
 
 	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, *ixgbe_gstrings_test,
+		       IXGBE_TEST_LEN * ETH_GSTRING_LEN);
+		break;
 	case ETH_SS_STATS:
 		for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
 			memcpy(p, ixgbe_gstrings_stats[i].stat_string,
@@ -942,6 +1007,815 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
 	}
 }
 
+static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	bool link_up;
+	u32 link_speed = 0;
+	*data = 0;
+
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
+	if (link_up)
+		return *data;
+	else
+		*data = 1;
+	return *data;
+}
+
+/* ethtool register test data */
+struct ixgbe_reg_test {
+	u16 reg;
+	u8  array_len;
+	u8  test_type;
+	u32 mask;
+	u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables.  We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST	1
+#define SET_READ_TEST	2
+#define WRITE_NO_TEST	3
+#define TABLE32_TEST	4
+#define TABLE64_TEST_LO	5
+#define TABLE64_TEST_HI	6
+
+/* default 82599 register test */
+static struct ixgbe_reg_test reg_test_82599[] = {
+	{ IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+	{ IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	{ IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
+	{ IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF },
+	{ IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+/* default 82598 register test */
+static struct ixgbe_reg_test reg_test_82598[] = {
+	{ IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	/* Enable all four RX queues before testing. */
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	/* RDH is read-only for 82598, only test RDT. */
+	{ IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF },
+	{ IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 },
+	{ IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF },
+	{ IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+#define REG_PATTERN_TEST(R, M, W)                                             \
+{                                                                             \
+	u32 pat, val, before;                                                 \
+	const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
+	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {                       \
+		before = readl(adapter->hw.hw_addr + R);                      \
+		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
+		val = readl(adapter->hw.hw_addr + R);                         \
+		if (val != (_test[pat] & W & M)) {                            \
+			DPRINTK(DRV, ERR, "pattern test reg %04X failed: got "\
+					  "0x%08X expected 0x%08X\n",         \
+				R, val, (_test[pat] & W & M));                \
+			*data = R;                                            \
+			writel(before, adapter->hw.hw_addr + R);              \
+			return 1;                                             \
+		}                                                             \
+		writel(before, adapter->hw.hw_addr + R);                      \
+	}                                                                     \
+}
+
+#define REG_SET_AND_CHECK(R, M, W)                                            \
+{                                                                             \
+	u32 val, before;                                                      \
+	before = readl(adapter->hw.hw_addr + R);                              \
+	writel((W & M), (adapter->hw.hw_addr + R));                           \
+	val = readl(adapter->hw.hw_addr + R);                                 \
+	if ((W & M) != (val & M)) {                                           \
+		DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
+				 "expected 0x%08X\n", R, (val & M), (W & M)); \
+		*data = R;                                                    \
+		writel(before, (adapter->hw.hw_addr + R));                    \
+		return 1;                                                     \
+	}                                                                     \
+	writel(before, (adapter->hw.hw_addr + R));                            \
+}
+
+static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_reg_test *test;
+	u32 value, before, after;
+	u32 i, toggle;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		toggle = 0x7FFFF30F;
+		test = reg_test_82599;
+	} else {
+		toggle = 0x7FFFF3FF;
+		test = reg_test_82598;
+	}
+
+	/*
+	 * Because the status register is such a special case,
+	 * we handle it separately from the rest of the register
+	 * tests.  Some bits are read-only, some toggle, and some
+	 * are writeable on newer MACs.
+	 */
+	before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS);
+	value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
+	after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
+	if (value != after) {
+		DPRINTK(DRV, ERR, "failed STATUS register test got: "
+		        "0x%08X expected: 0x%08X\n", after, value);
+		*data = 1;
+		return 1;
+	}
+	/* restore previous status */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, before);
+
+	/*
+	 * Perform the remainder of the register test, looping through
+	 * the test table until we either fail or reach the null entry.
+	 */
+	while (test->reg) {
+		for (i = 0; i < test->array_len; i++) {
+			switch (test->test_type) {
+			case PATTERN_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 0x40),
+						test->mask,
+						test->write);
+				break;
+			case SET_READ_TEST:
+				REG_SET_AND_CHECK(test->reg + (i * 0x40),
+						test->mask,
+						test->write);
+				break;
+			case WRITE_NO_TEST:
+				writel(test->write,
+				       (adapter->hw.hw_addr + test->reg)
+				       + (i * 0x40));
+				break;
+			case TABLE32_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 4),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_LO:
+				REG_PATTERN_TEST(test->reg + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_HI:
+				REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			}
+		}
+		test++;
+	}
+
+	*data = 0;
+	return 0;
+}
+
+static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	if (hw->eeprom.ops.validate_checksum(hw, NULL))
+		*data = 1;
+	else
+		*data = 0;
+	return *data;
+}
+
+static irqreturn_t ixgbe_test_intr(int irq, void *data)
+{
+	struct net_device *netdev = (struct net_device *) data;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
+
+	return IRQ_HANDLED;
+}
+
+static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct net_device *netdev = adapter->netdev;
+	u32 mask, i = 0, shared_int = true;
+	u32 irq = adapter->pdev->irq;
+
+	*data = 0;
+
+	/* Hook up test interrupt handler just for this test */
+	if (adapter->msix_entries) {
+		/* NOTE: we don't test MSI-X interrupts here, yet */
+		return 0;
+	} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+		shared_int = false;
+		if (request_irq(irq, &ixgbe_test_intr, 0, netdev->name,
+				netdev)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (!request_irq(irq, &ixgbe_test_intr, IRQF_PROBE_SHARED,
+	                        netdev->name, netdev)) {
+		shared_int = false;
+	} else if (request_irq(irq, &ixgbe_test_intr, IRQF_SHARED,
+	                       netdev->name, netdev)) {
+		*data = 1;
+		return -1;
+	}
+	DPRINTK(HW, INFO, "testing %s interrupt\n",
+		(shared_int ? "shared" : "unshared"));
+
+	/* Disable all the interrupts */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	msleep(10);
+
+	/* Test each interrupt */
+	for (; i < 10; i++) {
+		/* Interrupt to test */
+		mask = 1 << i;
+
+		if (!shared_int) {
+			/*
+			 * Disable the interrupts to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+			                ~mask & 0x00007FFF);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+			                ~mask & 0x00007FFF);
+			msleep(10);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
+		}
+
+		/*
+		 * Enable the interrupt to be reported in the cause
+		 * register and then force the same interrupt and see
+		 * if one gets posted.  If an interrupt was not posted
+		 * to the bus, the test failed.
+		 */
+		adapter->test_icr = 0;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+		msleep(10);
+
+		if (!(adapter->test_icr &mask)) {
+			*data = 4;
+			break;
+		}
+
+		if (!shared_int) {
+			/*
+			 * Disable the other interrupts to be reported in
+			 * the cause register and then force the other
+			 * interrupts and see if any get posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+			                ~mask & 0x00007FFF);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+			                ~mask & 0x00007FFF);
+			msleep(10);
+
+			if (adapter->test_icr) {
+				*data = 5;
+				break;
+			}
+		}
+	}
+
+	/* Disable all the interrupts */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	msleep(10);
+
+	/* Unhook test interrupt handler */
+	free_irq(irq, netdev);
+
+	return *data;
+}
+
+static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	u32 reg_ctl;
+	int i;
+
+	/* shut down the DMA engines now so they can be reinitialized later */
+
+	/* first Rx */
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	reg_ctl &= ~IXGBE_RXCTRL_RXEN;
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl);
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(0));
+	reg_ctl &= ~IXGBE_RXDCTL_ENABLE;
+	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(0), reg_ctl);
+
+	/* now Tx */
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(0));
+	reg_ctl &= ~IXGBE_TXDCTL_ENABLE;
+	IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(0), reg_ctl);
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+		reg_ctl &= ~IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl);
+	}
+
+	ixgbe_reset(adapter);
+
+	if (tx_ring->desc && tx_ring->tx_buffer_info) {
+		for (i = 0; i < tx_ring->count; i++) {
+			struct ixgbe_tx_buffer *buf =
+					&(tx_ring->tx_buffer_info[i]);
+			if (buf->dma)
+				pci_unmap_single(pdev, buf->dma, buf->length,
+				                 PCI_DMA_TODEVICE);
+			if (buf->skb)
+				dev_kfree_skb(buf->skb);
+		}
+	}
+
+	if (rx_ring->desc && rx_ring->rx_buffer_info) {
+		for (i = 0; i < rx_ring->count; i++) {
+			struct ixgbe_rx_buffer *buf =
+					&(rx_ring->rx_buffer_info[i]);
+			if (buf->dma)
+				pci_unmap_single(pdev, buf->dma,
+						 IXGBE_RXBUFFER_2048,
+						 PCI_DMA_FROMDEVICE);
+			if (buf->skb)
+				dev_kfree_skb(buf->skb);
+		}
+	}
+
+	if (tx_ring->desc) {
+		pci_free_consistent(pdev, tx_ring->size, tx_ring->desc,
+		                    tx_ring->dma);
+		tx_ring->desc = NULL;
+	}
+	if (rx_ring->desc) {
+		pci_free_consistent(pdev, rx_ring->size, rx_ring->desc,
+		                    rx_ring->dma);
+		rx_ring->desc = NULL;
+	}
+
+	kfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+	kfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+
+	return;
+}
+
+static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	u32 rctl, reg_data;
+	int i, ret_val;
+
+	/* Setup Tx descriptor ring and Tx buffers */
+
+	if (!tx_ring->count)
+		tx_ring->count = IXGBE_DEFAULT_TXD;
+
+	tx_ring->tx_buffer_info = kcalloc(tx_ring->count,
+	                                  sizeof(struct ixgbe_tx_buffer),
+	                                  GFP_KERNEL);
+	if (!(tx_ring->tx_buffer_info)) {
+		ret_val = 1;
+		goto err_nomem;
+	}
+
+	tx_ring->size = tx_ring->count * sizeof(struct ixgbe_legacy_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+	if (!(tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+						   &tx_ring->dma))) {
+		ret_val = 2;
+		goto err_nomem;
+	}
+	tx_ring->next_to_use = tx_ring->next_to_clean = 0;
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAL(0),
+			((u64) tx_ring->dma & 0x00000000FFFFFFFF));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAH(0),
+			((u64) tx_ring->dma >> 32));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDLEN(0),
+			tx_ring->count * sizeof(struct ixgbe_legacy_tx_desc));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDH(0), 0);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(0), 0);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data |= IXGBE_HLREG0_TXPADEN;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL);
+		reg_data |= IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data);
+	}
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(0));
+	reg_data |= IXGBE_TXDCTL_ENABLE;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(0), reg_data);
+
+	for (i = 0; i < tx_ring->count; i++) {
+		struct ixgbe_legacy_tx_desc *desc = IXGBE_TX_DESC(*tx_ring, i);
+		struct sk_buff *skb;
+		unsigned int size = 1024;
+
+		skb = alloc_skb(size, GFP_KERNEL);
+		if (!skb) {
+			ret_val = 3;
+			goto err_nomem;
+		}
+		skb_put(skb, size);
+		tx_ring->tx_buffer_info[i].skb = skb;
+		tx_ring->tx_buffer_info[i].length = skb->len;
+		tx_ring->tx_buffer_info[i].dma =
+			pci_map_single(pdev, skb->data, skb->len,
+					PCI_DMA_TODEVICE);
+		desc->buffer_addr = cpu_to_le64(tx_ring->tx_buffer_info[i].dma);
+		desc->lower.data = cpu_to_le32(skb->len);
+		desc->lower.data |= cpu_to_le32(IXGBE_TXD_CMD_EOP |
+		                                IXGBE_TXD_CMD_IFCS |
+		                                IXGBE_TXD_CMD_RS);
+		desc->upper.data = 0;
+	}
+
+	/* Setup Rx Descriptor ring and Rx buffers */
+
+	if (!rx_ring->count)
+		rx_ring->count = IXGBE_DEFAULT_RXD;
+
+	rx_ring->rx_buffer_info = kcalloc(rx_ring->count,
+	                                  sizeof(struct ixgbe_rx_buffer),
+	                                  GFP_KERNEL);
+	if (!(rx_ring->rx_buffer_info)) {
+		ret_val = 4;
+		goto err_nomem;
+	}
+
+	rx_ring->size = rx_ring->count * sizeof(struct ixgbe_legacy_rx_desc);
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+	if (!(rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
+						   &rx_ring->dma))) {
+		ret_val = 5;
+		goto err_nomem;
+	}
+	rx_ring->next_to_use = rx_ring->next_to_clean = 0;
+
+	rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl & ~IXGBE_RXCTRL_RXEN);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDBAL(0),
+			((u64)rx_ring->dma & 0xFFFFFFFF));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDBAH(0),
+			((u64) rx_ring->dma >> 32));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDLEN(0), rx_ring->size);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDH(0), 0);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(0), 0);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+	reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data &= ~IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_RDRXCTL);
+#define IXGBE_RDRXCTL_RDMTS_MASK    0x00000003 /* Receive Descriptor Minimum
+                                                  Threshold Size mask */
+	reg_data &= ~IXGBE_RDRXCTL_RDMTS_MASK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDRXCTL, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MCSTCTRL);
+#define IXGBE_MCSTCTRL_MO_MASK      0x00000003 /* Multicast Offset mask */
+	reg_data &= ~IXGBE_MCSTCTRL_MO_MASK;
+	reg_data |= adapter->hw.mac.mc_filter_type;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_MCSTCTRL, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(0));
+	reg_data |= IXGBE_RXDCTL_ENABLE;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(0), reg_data);
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		int j = adapter->rx_ring[0].reg_idx;
+		u32 k;
+		for (k = 0; k < 10; k++) {
+			if (IXGBE_READ_REG(&adapter->hw,
+			                   IXGBE_RXDCTL(j)) & IXGBE_RXDCTL_ENABLE)
+				break;
+			else
+				msleep(1);
+		}
+	}
+
+	rctl |= IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl);
+
+	for (i = 0; i < rx_ring->count; i++) {
+		struct ixgbe_legacy_rx_desc *rx_desc =
+					IXGBE_RX_DESC(*rx_ring, i);
+		struct sk_buff *skb;
+
+		skb = alloc_skb(IXGBE_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+		if (!skb) {
+			ret_val = 6;
+			goto err_nomem;
+		}
+		skb_reserve(skb, NET_IP_ALIGN);
+		rx_ring->rx_buffer_info[i].skb = skb;
+		rx_ring->rx_buffer_info[i].dma =
+			pci_map_single(pdev, skb->data, IXGBE_RXBUFFER_2048,
+			               PCI_DMA_FROMDEVICE);
+		rx_desc->buffer_addr =
+				cpu_to_le64(rx_ring->rx_buffer_info[i].dma);
+		memset(skb->data, 0x00, skb->len);
+	}
+
+	return 0;
+
+err_nomem:
+	ixgbe_free_desc_rings(adapter);
+	return ret_val;
+}
+
+static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg_data;
+
+	/* right now we only support MAC loopback in the driver */
+
+	/* Setup MAC loopback */
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data |= IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_AUTOC);
+	reg_data &= ~IXGBE_AUTOC_LMS_MASK;
+	reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_AUTOC, reg_data);
+
+	/* Disable Atlas Tx lanes; re-enabled in reset path */
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		u8 atlas;
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_REG_EN;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas);
+	}
+
+	return 0;
+}
+
+static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter)
+{
+	u32 reg_data;
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data &= ~IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+}
+
+static void ixgbe_create_lbtest_frame(struct sk_buff *skb,
+                                      unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size &= ~1;
+	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int ixgbe_check_lbtest_frame(struct sk_buff *skb,
+                                    unsigned int frame_size)
+{
+	frame_size &= ~1;
+	if (*(skb->data + 3) == 0xFF) {
+		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+		    (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+			return 0;
+		}
+	}
+	return 13;
+}
+
+static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	int i, j, k, l, lc, good_cnt, ret_val = 0;
+	unsigned long time;
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(0), rx_ring->count - 1);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
+	 * The idea is to wrap the largest ring a number of times using 64
+	 * send/receive pairs during each loop
+	 */
+
+	if (rx_ring->count <= tx_ring->count)
+		lc = ((tx_ring->count / 64) * 2) + 1;
+	else
+		lc = ((rx_ring->count / 64) * 2) + 1;
+
+	k = l = 0;
+	for (j = 0; j <= lc; j++) {
+		for (i = 0; i < 64; i++) {
+			ixgbe_create_lbtest_frame(
+					tx_ring->tx_buffer_info[k].skb,
+					1024);
+			pci_dma_sync_single_for_device(pdev,
+				tx_ring->tx_buffer_info[k].dma,
+				tx_ring->tx_buffer_info[k].length,
+				PCI_DMA_TODEVICE);
+			if (unlikely(++k == tx_ring->count))
+				k = 0;
+		}
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(0), k);
+		msleep(200);
+		/* set the start time for the receive */
+		time = jiffies;
+		good_cnt = 0;
+		do {
+			/* receive the sent packets */
+			pci_dma_sync_single_for_cpu(pdev,
+					rx_ring->rx_buffer_info[l].dma,
+					IXGBE_RXBUFFER_2048,
+					PCI_DMA_FROMDEVICE);
+			ret_val = ixgbe_check_lbtest_frame(
+					rx_ring->rx_buffer_info[l].skb, 1024);
+			if (!ret_val)
+				good_cnt++;
+			if (++l == rx_ring->count)
+				l = 0;
+			/*
+			 * time + 20 msecs (200 msecs on 2.4) is more than
+			 * enough time to complete the receives, if it's
+			 * exceeded, break and error off
+			 */
+		} while (good_cnt < 64 && jiffies < (time + 20));
+		if (good_cnt != 64) {
+			/* ret_val is the same as mis-compare */
+			ret_val = 13;
+			break;
+		}
+		if (jiffies >= (time + 20)) {
+			/* Error code for time out error */
+			ret_val = 14;
+			break;
+		}
+	}
+
+	return ret_val;
+}
+
+static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	*data = ixgbe_setup_desc_rings(adapter);
+	if (*data)
+		goto out;
+	*data = ixgbe_setup_loopback_test(adapter);
+	if (*data)
+		goto err_loopback;
+	*data = ixgbe_run_loopback_test(adapter);
+	ixgbe_loopback_cleanup(adapter);
+
+err_loopback:
+	ixgbe_free_desc_rings(adapter);
+out:
+	return *data;
+}
+
+static void ixgbe_diag_test(struct net_device *netdev,
+                            struct ethtool_test *eth_test, u64 *data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	bool if_running = netif_running(netdev);
+
+	set_bit(__IXGBE_TESTING, &adapter->state);
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		/* Offline tests */
+
+		DPRINTK(HW, INFO, "offline testing starting\n");
+
+		/* Link test performed before hardware reset so autoneg doesn't
+		 * interfere with test result */
+		if (ixgbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			ixgbe_reset(adapter);
+
+		DPRINTK(HW, INFO, "register testing starting\n");
+		if (ixgbe_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		DPRINTK(HW, INFO, "eeprom testing starting\n");
+		if (ixgbe_eeprom_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		DPRINTK(HW, INFO, "interrupt testing starting\n");
+		if (ixgbe_intr_test(adapter, &data[2]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		DPRINTK(HW, INFO, "loopback testing starting\n");
+		if (ixgbe_loopback_test(adapter, &data[3]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+
+		clear_bit(__IXGBE_TESTING, &adapter->state);
+		if (if_running)
+			dev_open(netdev);
+	} else {
+		DPRINTK(HW, INFO, "online testing starting\n");
+		/* Online tests */
+		if (ixgbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* Online tests aren't run; pass by default */
+		data[0] = 0;
+		data[1] = 0;
+		data[2] = 0;
+		data[3] = 0;
+
+		clear_bit(__IXGBE_TESTING, &adapter->state);
+	}
+	msleep_interruptible(4 * 1000);
+}
 
 static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
                                struct ethtool_wolinfo *wol)
@@ -1106,20 +1980,40 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 	}
 
 	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
 		if (q_vector->txr_count && !q_vector->rxr_count)
 			/* tx vector gets half the rate */
 			q_vector->eitr = (adapter->eitr_param >> 1);
 		else
 			/* rx only or mixed */
 			q_vector->eitr = adapter->eitr_param;
-		ixgbe_write_eitr(adapter, i,
-		                 EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
+		ixgbe_write_eitr(q_vector);
 	}
 
 	return 0;
 }
 
+static int ixgbe_set_flags(struct net_device *netdev, u32 data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	ethtool_op_set_flags(netdev, data);
+
+	if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+		return 0;
+
+	/* if state changes we need to update adapter->flags and reset */
+	if ((!!(data & ETH_FLAG_LRO)) != 
+	    (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
+		adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+		if (netif_running(netdev))
+			ixgbe_reinit_locked(adapter);
+		else
+			ixgbe_reset(adapter);
+	}
+	return 0;
+
+}
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_settings           = ixgbe_get_settings,
@@ -1147,6 +2041,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_msglevel           = ixgbe_set_msglevel,
 	.get_tso                = ethtool_op_get_tso,
 	.set_tso                = ixgbe_set_tso,
+	.self_test              = ixgbe_diag_test,
 	.get_strings            = ixgbe_get_strings,
 	.phys_id                = ixgbe_phys_id,
 	.get_sset_count         = ixgbe_get_sset_count,
@@ -1154,7 +2049,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_coalesce           = ixgbe_get_coalesce,
 	.set_coalesce           = ixgbe_set_coalesce,
 	.get_flags              = ethtool_op_get_flags,
-	.set_flags              = ethtool_op_set_flags,
+	.set_flags              = ixgbe_set_flags,
 };
 
 void ixgbe_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
new file mode 100644
index 00000000000..3c3bf1f07b8
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -0,0 +1,556 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include "ixgbe.h"
+#include <linux/if_ether.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/libfcoe.h>
+
+/**
+ * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
+ * @rx_desc: advanced rx descriptor
+ *
+ * Returns : true if it is FCoE pkt
+ */
+static inline bool ixgbe_rx_is_fcoe(union ixgbe_adv_rx_desc *rx_desc)
+{
+	u16 p;
+
+	p = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info);
+	if (p & IXGBE_RXDADV_PKTTYPE_ETQF) {
+		p &= IXGBE_RXDADV_PKTTYPE_ETQF_MASK;
+		p >>= IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT;
+		return p == IXGBE_ETQF_FILTER_FCOE;
+	}
+	return false;
+}
+
+/**
+ * ixgbe_fcoe_clear_ddp - clear the given ddp context
+ * @ddp - ptr to the ixgbe_fcoe_ddp
+ *
+ * Returns : none
+ *
+ */
+static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp)
+{
+	ddp->len = 0;
+	ddp->err = 0;
+	ddp->udl = NULL;
+	ddp->udp = 0UL;
+	ddp->sgl = NULL;
+	ddp->sgc = 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp_put - free the ddp context for a given xid
+ * @netdev: the corresponding net_device
+ * @xid: the xid that corresponding ddp will be freed
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_done
+ * and it is expected to be called by ULD, i.e., FCP layer of libfc
+ * to release the corresponding ddp context when the I/O is done.
+ *
+ * Returns : data length already ddp-ed in bytes
+ */
+int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
+{
+	int len = 0;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_fcoe_ddp *ddp;
+
+	if (!netdev)
+		goto out_ddp_put;
+
+	if (xid >= IXGBE_FCOE_DDP_MAX)
+		goto out_ddp_put;
+
+	adapter = netdev_priv(netdev);
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (!ddp->udl)
+		goto out_ddp_put;
+
+	len = ddp->len;
+	/* if there an error, force to invalidate ddp context */
+	if (ddp->err) {
+		spin_lock_bh(&fcoe->lock);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLT, 0);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLTRW,
+				(xid | IXGBE_FCFLTRW_WE));
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
+				(xid | IXGBE_FCDMARW_WE));
+		spin_unlock_bh(&fcoe->lock);
+	}
+	if (ddp->sgl)
+		pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc,
+			     DMA_FROM_DEVICE);
+	pci_pool_free(fcoe->pool, ddp->udl, ddp->udp);
+	ixgbe_fcoe_clear_ddp(ddp);
+
+out_ddp_put:
+	return len;
+}
+
+/**
+ * ixgbe_fcoe_ddp_get - called to set up ddp context
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+		       struct scatterlist *sgl, unsigned int sgc)
+{
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_hw *hw;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct scatterlist *sg;
+	unsigned int i, j, dmacount;
+	unsigned int len;
+	static const unsigned int bufflen = 4096;
+	unsigned int firstoff = 0;
+	unsigned int lastsize;
+	unsigned int thisoff = 0;
+	unsigned int thislen = 0;
+	u32 fcbuff, fcdmarw, fcfltrw;
+	dma_addr_t addr;
+
+	if (!netdev || !sgl)
+		return 0;
+
+	adapter = netdev_priv(netdev);
+	if (xid >= IXGBE_FCOE_DDP_MAX) {
+		DPRINTK(DRV, WARNING, "xid=0x%x out-of-range\n", xid);
+		return 0;
+	}
+
+	fcoe = &adapter->fcoe;
+	if (!fcoe->pool) {
+		DPRINTK(DRV, WARNING, "xid=0x%x no ddp pool for fcoe\n", xid);
+		return 0;
+	}
+
+	ddp = &fcoe->ddp[xid];
+	if (ddp->sgl) {
+		DPRINTK(DRV, ERR, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
+			xid, ddp->sgl, ddp->sgc);
+		return 0;
+	}
+	ixgbe_fcoe_clear_ddp(ddp);
+
+	/* setup dma from scsi command sgl */
+	dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
+	if (dmacount == 0) {
+		DPRINTK(DRV, ERR, "xid 0x%x DMA map error\n", xid);
+		return 0;
+	}
+
+	/* alloc the udl from our ddp pool */
+	ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
+	if (!ddp->udl) {
+		DPRINTK(DRV, ERR, "failed allocated ddp context\n");
+		goto out_noddp_unmap;
+	}
+	ddp->sgl = sgl;
+	ddp->sgc = sgc;
+
+	j = 0;
+	for_each_sg(sgl, sg, dmacount, i) {
+		addr = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		while (len) {
+			/* get the offset of length of current buffer */
+			thisoff = addr & ((dma_addr_t)bufflen - 1);
+			thislen = min((bufflen - thisoff), len);
+			/*
+			 * all but the 1st buffer (j == 0)
+			 * must be aligned on bufflen
+			 */
+			if ((j != 0) && (thisoff))
+				goto out_noddp_free;
+			/*
+			 * all but the last buffer
+			 * ((i == (dmacount - 1)) && (thislen == len))
+			 * must end at bufflen
+			 */
+			if (((i != (dmacount - 1)) || (thislen != len))
+			    && ((thislen + thisoff) != bufflen))
+				goto out_noddp_free;
+
+			ddp->udl[j] = (u64)(addr - thisoff);
+			/* only the first buffer may have none-zero offset */
+			if (j == 0)
+				firstoff = thisoff;
+			len -= thislen;
+			addr += thislen;
+			j++;
+			/* max number of buffers allowed in one DDP context */
+			if (j > IXGBE_BUFFCNT_MAX) {
+				DPRINTK(DRV, ERR, "xid=%x:%d,%d,%d:addr=%llx "
+					"not enough descriptors\n",
+					xid, i, j, dmacount, (u64)addr);
+				goto out_noddp_free;
+			}
+		}
+	}
+	/* only the last buffer may have non-full bufflen */
+	lastsize = thisoff + thislen;
+
+	fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
+	fcbuff |= (j << IXGBE_FCBUFF_BUFFCNT_SHIFT);
+	fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
+	fcbuff |= (IXGBE_FCBUFF_VALID);
+
+	fcdmarw = xid;
+	fcdmarw |= IXGBE_FCDMARW_WE;
+	fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT);
+
+	fcfltrw = xid;
+	fcfltrw |= IXGBE_FCFLTRW_WE;
+
+	/* program DMA context */
+	hw = &adapter->hw;
+	spin_lock_bh(&fcoe->lock);
+	IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_32BIT_MASK);
+	IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
+	IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
+	IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw);
+	/* program filter context */
+	IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0);
+	IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID);
+	IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw);
+	spin_unlock_bh(&fcoe->lock);
+
+	return 1;
+
+out_noddp_free:
+	pci_pool_free(fcoe->pool, ddp->udl, ddp->udp);
+	ixgbe_fcoe_clear_ddp(ddp);
+
+out_noddp_unmap:
+	pci_unmap_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
+	return 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp - check ddp status and mark it done
+ * @adapter: ixgbe adapter
+ * @rx_desc: advanced rx descriptor
+ * @skb: the skb holding the received data
+ *
+ * This checks ddp status.
+ *
+ * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates
+ * not passing the skb to ULD, > 0 indicates is the length of data
+ * being ddped.
+ */
+int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+		   union ixgbe_adv_rx_desc *rx_desc,
+		   struct sk_buff *skb)
+{
+	u16 xid;
+	u32 sterr, fceofe, fcerr, fcstat;
+	int rc = -EINVAL;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct fc_frame_header *fh;
+
+	if (!ixgbe_rx_is_fcoe(rx_desc))
+		goto ddp_out;
+
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	sterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	fcerr = (sterr & IXGBE_RXDADV_ERR_FCERR);
+	fceofe = (sterr & IXGBE_RXDADV_ERR_FCEOFE);
+	if (fcerr == IXGBE_FCERR_BADCRC)
+		skb->ip_summed = CHECKSUM_NONE;
+
+	skb_reset_network_header(skb);
+	skb_set_transport_header(skb, skb_network_offset(skb) +
+				 sizeof(struct fcoe_hdr));
+	fh = (struct fc_frame_header *)skb_transport_header(skb);
+	xid =  be16_to_cpu(fh->fh_ox_id);
+	if (xid >= IXGBE_FCOE_DDP_MAX)
+		goto ddp_out;
+
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (!ddp->udl)
+		goto ddp_out;
+
+	ddp->err = (fcerr | fceofe);
+	if (ddp->err)
+		goto ddp_out;
+
+	fcstat = (sterr & IXGBE_RXDADV_STAT_FCSTAT);
+	if (fcstat) {
+		/* update length of DDPed data */
+		ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		/* unmap the sg list when FCP_RSP is received */
+		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
+			pci_unmap_sg(adapter->pdev, ddp->sgl,
+				     ddp->sgc, DMA_FROM_DEVICE);
+			ddp->sgl = NULL;
+			ddp->sgc = 0;
+		}
+		/* return 0 to bypass going to ULD for DDPed data */
+		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
+			rc = 0;
+		else
+			rc = ddp->len;
+	}
+
+ddp_out:
+	return rc;
+}
+
+/**
+ * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO)
+ * @adapter: ixgbe adapter
+ * @tx_ring: tx desc ring
+ * @skb: associated skb
+ * @tx_flags: tx flags
+ * @hdr_len: hdr_len to be returned
+ *
+ * This sets up large send offload for FCoE
+ *
+ * Returns : 0 indicates no FSO, > 0 for FSO, < 0 for error
+ */
+int ixgbe_fso(struct ixgbe_adapter *adapter,
+              struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+              u32 tx_flags, u8 *hdr_len)
+{
+	u8 sof, eof;
+	u32 vlan_macip_lens;
+	u32 fcoe_sof_eof;
+	u32 type_tucmd;
+	u32 mss_l4len_idx;
+	int mss = 0;
+	unsigned int i;
+	struct ixgbe_tx_buffer *tx_buffer_info;
+	struct ixgbe_adv_tx_context_desc *context_desc;
+	struct fc_frame_header *fh;
+
+	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
+		DPRINTK(DRV, ERR, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+			skb_shinfo(skb)->gso_type);
+		return -EINVAL;
+	}
+
+	/* resets the header to point fcoe/fc */
+	skb_set_network_header(skb, skb->mac_len);
+	skb_set_transport_header(skb, skb->mac_len +
+				 sizeof(struct fcoe_hdr));
+
+	/* sets up SOF and ORIS */
+	fcoe_sof_eof = 0;
+	sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof;
+	switch (sof) {
+	case FC_SOF_I2:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIS;
+		break;
+	case FC_SOF_I3:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIS;
+		break;
+	case FC_SOF_N2:
+		break;
+	case FC_SOF_N3:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
+		break;
+	default:
+		DPRINTK(DRV, WARNING, "unknown sof = 0x%x\n", sof);
+		return -EINVAL;
+	}
+
+	/* the first byte of the last dword is EOF */
+	skb_copy_bits(skb, skb->len - 4, &eof, 1);
+	/* sets up EOF and ORIE */
+	switch (eof) {
+	case FC_EOF_N:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
+		break;
+	case FC_EOF_T:
+		/* lso needs ORIE */
+		if (skb_is_gso(skb)) {
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIE;
+		} else {
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T;
+		}
+		break;
+	case FC_EOF_NI:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI;
+		break;
+	case FC_EOF_A:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
+		break;
+	default:
+		DPRINTK(DRV, WARNING, "unknown eof = 0x%x\n", eof);
+		return -EINVAL;
+	}
+
+	/* sets up PARINC indicating data offset */
+	fh = (struct fc_frame_header *)skb_transport_header(skb);
+	if (fh->fh_f_ctl[2] & FC_FC_REL_OFF)
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC;
+
+	/* hdr_len includes fc_hdr if FCoE lso is enabled */
+	*hdr_len = sizeof(struct fcoe_crc_eof);
+	if (skb_is_gso(skb))
+		*hdr_len += (skb_transport_offset(skb) +
+			     sizeof(struct fc_frame_header));
+	/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+	vlan_macip_lens = (skb_transport_offset(skb) +
+			  sizeof(struct fc_frame_header));
+	vlan_macip_lens |= ((skb_transport_offset(skb) - 4)
+			   << IXGBE_ADVTXD_MACLEN_SHIFT);
+	vlan_macip_lens |= (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
+
+	/* type_tycmd and mss: set TUCMD.FCoE to enable offload */
+	type_tucmd = IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT |
+		     IXGBE_ADVTXT_TUCMD_FCOE;
+	if (skb_is_gso(skb))
+		mss = skb_shinfo(skb)->gso_size;
+	/* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */
+	mss_l4len_idx = (mss << IXGBE_ADVTXD_MSS_SHIFT) |
+			(1 << IXGBE_ADVTXD_IDX_SHIFT);
+
+	/* write context desc */
+	i = tx_ring->next_to_use;
+	context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
+	context_desc->vlan_macip_lens	= cpu_to_le32(vlan_macip_lens);
+	context_desc->seqnum_seed	= cpu_to_le32(fcoe_sof_eof);
+	context_desc->type_tucmd_mlhl	= cpu_to_le32(type_tucmd);
+	context_desc->mss_l4len_idx	= cpu_to_le32(mss_l4len_idx);
+
+	tx_buffer_info = &tx_ring->tx_buffer_info[i];
+	tx_buffer_info->time_stamp = jiffies;
+	tx_buffer_info->next_to_watch = i;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
+
+	return skb_is_gso(skb);
+}
+
+/**
+ * ixgbe_configure_fcoe - configures registers for fcoe at start
+ * @adapter: ptr to ixgbe adapter
+ *
+ * This sets up FCoE related registers
+ *
+ * Returns : none
+ */
+void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
+{
+	int i, fcoe_q, fcoe_i;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+	/* create the pool for ddp if not created yet */
+	if (!fcoe->pool) {
+		/* allocate ddp pool */
+		fcoe->pool = pci_pool_create("ixgbe_fcoe_ddp",
+					     adapter->pdev, IXGBE_FCPTR_MAX,
+					     IXGBE_FCPTR_ALIGN, PAGE_SIZE);
+		if (!fcoe->pool)
+			DPRINTK(DRV, ERR,
+				"failed to allocated FCoE DDP pool\n");
+
+		spin_lock_init(&fcoe->lock);
+	}
+
+	/* Enable L2 eth type filter for FCoE */
+	IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
+			(ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
+	if (adapter->ring_feature[RING_F_FCOE].indices) {
+		/* Use multiple rx queues for FCoE by redirection table */
+		for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
+			fcoe_i = f->mask + i % f->indices;
+			fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
+			fcoe_q = adapter->rx_ring[fcoe_i].reg_idx;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
+		}
+		IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
+		IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+	} else  {
+		/* Use single rx queue for FCoE */
+		fcoe_i = f->mask;
+		fcoe_q = adapter->rx_ring[fcoe_i].reg_idx;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
+				IXGBE_ETQS_QUEUE_EN |
+				(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
+			IXGBE_FCRXCTRL_FCOELLI |
+			IXGBE_FCRXCTRL_FCCRCBO |
+			(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
+}
+
+/**
+ * ixgbe_cleanup_fcoe - release all fcoe ddp context resources
+ * @adapter : ixgbe adapter
+ *
+ * Cleans up outstanding ddp context resources
+ *
+ * Returns : none
+ */
+void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
+{
+	int i;
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+	/* release ddp resource */
+	if (fcoe->pool) {
+		for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
+			ixgbe_fcoe_ddp_put(adapter->netdev, i);
+		pci_pool_destroy(fcoe->pool);
+		fcoe->pool = NULL;
+	}
+}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
new file mode 100644
index 00000000000..c5b50026a89
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -0,0 +1,67 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_FCOE_H
+#define _IXGBE_FCOE_H
+
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+
+/* shift bits within STAT fo FCSTAT */
+#define IXGBE_RXDADV_FCSTAT_SHIFT	4
+
+/* ddp user buffer */
+#define IXGBE_BUFFCNT_MAX	256	/* 8 bits bufcnt */
+#define IXGBE_FCPTR_ALIGN	16
+#define IXGBE_FCPTR_MAX	(IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t))
+#define IXGBE_FCBUFF_4KB	0x0
+#define IXGBE_FCBUFF_8KB	0x1
+#define IXGBE_FCBUFF_16KB	0x2
+#define IXGBE_FCBUFF_64KB	0x3
+#define IXGBE_FCBUFF_MAX	65536	/* 64KB max */
+#define IXGBE_FCBUFF_MIN	4096	/* 4KB min */
+#define IXGBE_FCOE_DDP_MAX	512	/* 9 bits xid */
+
+/* fcerr */
+#define IXGBE_FCERR_BADCRC       0x00100000
+
+struct ixgbe_fcoe_ddp {
+	int len;
+	u32 err;
+	unsigned int sgc;
+	struct scatterlist *sgl;
+	dma_addr_t udp;
+	u64 *udl;
+};
+
+struct ixgbe_fcoe {
+	spinlock_t lock;
+	struct pci_pool *pool;
+	struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
+};
+
+#endif /* _IXGBE_FCOE_H */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 07e778d3e5d..a551a96ce67 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -39,6 +39,7 @@
 #include <net/ip6_checksum.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
+#include <scsi/fc/fc_fcoe.h>
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
@@ -47,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
                               "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.8-k2"
+#define DRV_VERSION "2.0.34-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
 
@@ -89,6 +90,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
 
@@ -183,6 +186,22 @@ static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
 	}
 }
 
+static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
+                                          u64 qmask)
+{
+	u32 mask;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+	} else {
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
+	}
+}
+
 static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
                                              struct ixgbe_tx_buffer
                                              *tx_buffer_info)
@@ -245,14 +264,13 @@ static void ixgbe_tx_timeout(struct net_device *netdev);
 
 /**
  * ixgbe_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
+ * @q_vector: structure containing interrupt and ring information
  * @tx_ring: tx ring to clean
- *
- * returns true if transmit work is done
  **/
-static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
+static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
                                struct ixgbe_ring *tx_ring)
 {
+	struct ixgbe_adapter *adapter = q_vector->adapter;
 	struct net_device *netdev = adapter->netdev;
 	union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
 	struct ixgbe_tx_buffer *tx_buffer_info;
@@ -275,12 +293,24 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
 
 			if (cleaned && skb) {
 				unsigned int segs, bytecount;
+				unsigned int hlen = skb_headlen(skb);
 
 				/* gso_segs is currently only valid for tcp */
 				segs = skb_shinfo(skb)->gso_segs ?: 1;
+#ifdef IXGBE_FCOE
+				/* adjust for FCoE Sequence Offload */
+				if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+				    && (skb->protocol == htons(ETH_P_FCOE)) &&
+				    skb_is_gso(skb)) {
+					hlen = skb_transport_offset(skb) +
+						sizeof(struct fc_frame_header) +
+						sizeof(struct fcoe_crc_eof);
+					segs = DIV_ROUND_UP(skb->len - hlen,
+						skb_shinfo(skb)->gso_size);
+				}
+#endif /* IXGBE_FCOE */
 				/* multiply data chunks by size of headers */
-				bytecount = ((segs - 1) * skb_headlen(skb)) +
-				            skb->len;
+				bytecount = ((segs - 1) * hlen) + skb->len;
 				total_packets += segs;
 				total_bytes += bytecount;
 			}
@@ -327,7 +357,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
 
 	/* re-arm the interrupt */
 	if (count >= tx_ring->work_limit)
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->v_idx);
+		ixgbe_irq_rearm_queues(adapter, ((u64)1 << q_vector->v_idx));
 
 	tx_ring->total_bytes += total_bytes;
 	tx_ring->total_packets += total_packets;
@@ -398,6 +428,9 @@ static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
 	if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
 		return;
 
+	/* always use CB2 mode, difference is masked in the CB driver */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
+
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		adapter->tx_ring[i].cpu = -1;
 		ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]);
@@ -419,9 +452,6 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
 		/* if we're already enabled, don't do it again */
 		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 			break;
-		/* Always use CB2 mode, difference is masked
-		 * in the CB driver. */
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
 		if (dca_add_requester(dev) == 0) {
 			adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
 			ixgbe_setup_dca(adapter);
@@ -451,6 +481,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
  **/
 static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
                               struct sk_buff *skb, u8 status,
+                              struct ixgbe_ring *ring,
                               union ixgbe_adv_rx_desc *rx_desc)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
@@ -458,24 +489,17 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
 	bool is_vlan = (status & IXGBE_RXD_STAT_VP);
 	u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
 
-	skb_record_rx_queue(skb, q_vector - &adapter->q_vector[0]);
-	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
+	skb_record_rx_queue(skb, ring->queue_index);
+	if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
 		if (adapter->vlgrp && is_vlan && (tag != 0))
 			vlan_gro_receive(napi, adapter->vlgrp, tag, skb);
 		else
 			napi_gro_receive(napi, skb);
 	} else {
-		if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
-			if (adapter->vlgrp && is_vlan && (tag != 0))
-				vlan_hwaccel_receive_skb(skb, adapter->vlgrp, tag);
-			else
-				netif_receive_skb(skb);
-		} else {
-			if (adapter->vlgrp && is_vlan && (tag != 0))
-				vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
-			else
-				netif_rx(skb);
-		}
+		if (adapter->vlgrp && is_vlan && (tag != 0))
+			vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
+		else
+			netif_rx(skb);
 	}
 }
 
@@ -622,6 +646,40 @@ static inline u16 ixgbe_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
 	return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
 }
 
+static inline u32 ixgbe_get_rsc_count(union ixgbe_adv_rx_desc *rx_desc)
+{
+	return (le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
+	        IXGBE_RXDADV_RSCCNT_MASK) >>
+	        IXGBE_RXDADV_RSCCNT_SHIFT;
+}
+
+/**
+ * ixgbe_transform_rsc_queue - change rsc queue into a full packet
+ * @skb: pointer to the last skb in the rsc queue
+ *
+ * This function changes a queue full of hw rsc buffers into a completed
+ * packet.  It uses the ->prev pointers to find the first packet and then
+ * turns it into the frag list owner.
+ **/
+static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
+{
+	unsigned int frag_list_size = 0;
+
+	while (skb->prev) {
+		struct sk_buff *prev = skb->prev;
+		frag_list_size += skb->len;
+		skb->prev = NULL;
+		skb = prev;
+	}
+
+	skb_shinfo(skb)->frag_list = skb->next;
+	skb->next = NULL;
+	skb->len += frag_list_size;
+	skb->data_len += frag_list_size;
+	skb->truesize += frag_list_size;
+	return skb;
+}
+
 static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
                                struct ixgbe_ring *rx_ring,
                                int *work_done, int work_to_do)
@@ -631,12 +689,15 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 	union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
 	struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
 	struct sk_buff *skb;
-	unsigned int i;
+	unsigned int i, rsc_count = 0;
 	u32 len, staterr;
 	u16 hdr_info;
 	bool cleaned = false;
 	int cleaned_count = 0;
 	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+#ifdef IXGBE_FCOE
+	int ddp_bytes = 0;
+#endif /* IXGBE_FCOE */
 
 	i = rx_ring->next_to_clean;
 	rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
@@ -667,7 +728,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		prefetch(skb->data - NET_IP_ALIGN);
 		rx_buffer_info->skb = NULL;
 
-		if (len && !skb_shinfo(skb)->nr_frags) {
+		if (rx_buffer_info->dma) {
 			pci_unmap_single(pdev, rx_buffer_info->dma,
 			                 rx_ring->rx_buf_len,
 			                 PCI_DMA_FROMDEVICE);
@@ -697,20 +758,38 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		i++;
 		if (i == rx_ring->count)
 			i = 0;
-		next_buffer = &rx_ring->rx_buffer_info[i];
 
 		next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i);
 		prefetch(next_rxd);
-
 		cleaned_count++;
+
+		if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+			rsc_count = ixgbe_get_rsc_count(rx_desc);
+
+		if (rsc_count) {
+			u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
+				     IXGBE_RXDADV_NEXTP_SHIFT;
+			next_buffer = &rx_ring->rx_buffer_info[nextp];
+			rx_ring->rsc_count += (rsc_count - 1);
+		} else {
+			next_buffer = &rx_ring->rx_buffer_info[i];
+		}
+
 		if (staterr & IXGBE_RXD_STAT_EOP) {
+			if (skb->prev)
+				skb = ixgbe_transform_rsc_queue(skb);
 			rx_ring->stats.packets++;
 			rx_ring->stats.bytes += skb->len;
 		} else {
-			rx_buffer_info->skb = next_buffer->skb;
-			rx_buffer_info->dma = next_buffer->dma;
-			next_buffer->skb = skb;
-			next_buffer->dma = 0;
+			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+				rx_buffer_info->skb = next_buffer->skb;
+				rx_buffer_info->dma = next_buffer->dma;
+				next_buffer->skb = skb;
+				next_buffer->dma = 0;
+			} else {
+				skb->next = next_buffer->skb;
+				skb->next->prev = skb;
+			}
 			adapter->non_eop_descs++;
 			goto next_desc;
 		}
@@ -727,7 +806,15 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		total_rx_packets++;
 
 		skb->protocol = eth_type_trans(skb, adapter->netdev);
-		ixgbe_receive_skb(q_vector, skb, staterr, rx_desc);
+#ifdef IXGBE_FCOE
+		/* if ddp, not passing to ULD unless for FCP_RSP or error */
+		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+			ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
+			if (!ddp_bytes)
+				goto next_desc;
+		}
+#endif /* IXGBE_FCOE */
+		ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
 
 next_desc:
 		rx_desc->wb.upper.status_error = 0;
@@ -740,7 +827,7 @@ next_desc:
 
 		/* use prefetched values */
 		rx_desc = next_rxd;
-		rx_buffer_info = next_buffer;
+		rx_buffer_info = &rx_ring->rx_buffer_info[i];
 
 		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	}
@@ -751,6 +838,21 @@ next_desc:
 	if (cleaned_count)
 		ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
 
+#ifdef IXGBE_FCOE
+	/* include DDPed FCoE data */
+	if (ddp_bytes > 0) {
+		unsigned int mss;
+
+		mss = adapter->netdev->mtu - sizeof(struct fcoe_hdr) -
+			sizeof(struct fc_frame_header) -
+			sizeof(struct fcoe_crc_eof);
+		if (mss > 512)
+			mss &= ~511;
+		total_rx_bytes += ddp_bytes;
+		total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss);
+	}
+#endif /* IXGBE_FCOE */
+
 	rx_ring->total_packets += total_rx_packets;
 	rx_ring->total_bytes += total_rx_bytes;
 	adapter->net_stats.rx_bytes += total_rx_bytes;
@@ -780,7 +882,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 	 * corresponding register.
 	 */
 	for (v_idx = 0; v_idx < q_vectors; v_idx++) {
-		q_vector = &adapter->q_vector[v_idx];
+		q_vector = adapter->q_vector[v_idx];
 		/* XXX for_each_bit(...) */
 		r_idx = find_first_bit(q_vector->rxr_idx,
 		                       adapter->num_rx_queues);
@@ -810,12 +912,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 			/* rx only */
 			q_vector->eitr = adapter->eitr_param;
 
-		/*
-		 * since this is initial set up don't need to call
-		 * ixgbe_write_eitr helper
-		 */
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx),
-		                EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
+		ixgbe_write_eitr(q_vector);
 	}
 
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
@@ -900,17 +997,19 @@ update_itr_done:
 
 /**
  * ixgbe_write_eitr - write EITR register in hardware specific way
- * @adapter: pointer to adapter struct
- * @v_idx: vector index into q_vector array
- * @itr_reg: new value to be written in *register* format, not ints/s
+ * @q_vector: structure containing interrupt and ring information
  *
  * This function is made to be called by ethtool and by the driver
  * when it needs to update EITR registers at runtime.  Hardware
  * specific quirks/differences are taken care of here.
  */
-void ixgbe_write_eitr(struct ixgbe_adapter *adapter, int v_idx, u32 itr_reg)
+void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
 {
+	struct ixgbe_adapter *adapter = q_vector->adapter;
 	struct ixgbe_hw *hw = &adapter->hw;
+	int v_idx = q_vector->v_idx;
+	u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
+
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
 		/* must write high and low 16 bits to reset counter */
 		itr_reg |= (itr_reg << 16);
@@ -929,8 +1028,7 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 	struct ixgbe_adapter *adapter = q_vector->adapter;
 	u32 new_itr;
 	u8 current_itr, ret_itr;
-	int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) /
-	                       sizeof(struct ixgbe_q_vector);
+	int i, r_idx;
 	struct ixgbe_ring *rx_ring, *tx_ring;
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
@@ -980,14 +1078,13 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 	}
 
 	if (new_itr != q_vector->eitr) {
-		u32 itr_reg;
+		/* do an exponential smoothing */
+		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
 
 		/* save the algorithm value here, not the smoothed one */
 		q_vector->eitr = new_itr;
-		/* do an exponential smoothing */
-		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
-		itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
-		ixgbe_write_eitr(adapter, v_idx, itr_reg);
+
+		ixgbe_write_eitr(q_vector);
 	}
 
 	return;
@@ -1058,14 +1155,64 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 	if (hw->mac.type == ixgbe_mac_82598EB)
 		ixgbe_check_fan_failure(adapter, eicr);
 
-	if (hw->mac.type == ixgbe_mac_82599EB)
+	if (hw->mac.type == ixgbe_mac_82599EB) {
 		ixgbe_check_sfp_event(adapter, eicr);
+
+		/* Handle Flow Director Full threshold interrupt */
+		if (eicr & IXGBE_EICR_FLOW_DIR) {
+			int i;
+			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_FLOW_DIR);
+			/* Disable transmits before FDIR Re-initialization */
+			netif_tx_stop_all_queues(netdev);
+			for (i = 0; i < adapter->num_tx_queues; i++) {
+				struct ixgbe_ring *tx_ring =
+				                           &adapter->tx_ring[i];
+				if (test_and_clear_bit(__IXGBE_FDIR_INIT_DONE,
+				                       &tx_ring->reinit_state))
+					schedule_work(&adapter->fdir_reinit_task);
+			}
+		}
+	}
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
 		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
 
 	return IRQ_HANDLED;
 }
 
+static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
+					   u64 qmask)
+{
+	u32 mask;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+	} else {
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask);
+	}
+	/* skip the flush */
+}
+
+static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
+                                            u64 qmask)
+{
+	u32 mask;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, mask);
+	} else {
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), mask);
+	}
+	/* skip the flush */
+}
+
 static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 {
 	struct ixgbe_q_vector *q_vector = data;
@@ -1079,17 +1226,16 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
 		tx_ring = &(adapter->tx_ring[r_idx]);
-#ifdef CONFIG_IXGBE_DCA
-		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-			ixgbe_update_tx_dca(adapter, tx_ring);
-#endif
 		tx_ring->total_bytes = 0;
 		tx_ring->total_packets = 0;
-		ixgbe_clean_tx_irq(adapter, tx_ring);
 		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
 		                      r_idx + 1);
 	}
 
+	/* disable interrupts on this vector only */
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	napi_schedule(&q_vector->napi);
+
 	return IRQ_HANDLED;
 }
 
@@ -1121,7 +1267,7 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	rx_ring = &(adapter->rx_ring[r_idx]);
 	/* disable interrupts on this vector only */
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rx_ring->v_idx);
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
 	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
@@ -1129,8 +1275,36 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 
 static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
 {
-	ixgbe_msix_clean_rx(irq, data);
-	ixgbe_msix_clean_tx(irq, data);
+	struct ixgbe_q_vector *q_vector = data;
+	struct ixgbe_adapter  *adapter = q_vector->adapter;
+	struct ixgbe_ring  *ring;
+	int r_idx;
+	int i;
+
+	if (!q_vector->txr_count && !q_vector->rxr_count)
+		return IRQ_HANDLED;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		ring = &(adapter->tx_ring[r_idx]);
+		ring->total_bytes = 0;
+		ring->total_packets = 0;
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+		                      r_idx + 1);
+	}
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	for (i = 0; i < q_vector->rxr_count; i++) {
+		ring = &(adapter->rx_ring[r_idx]);
+		ring->total_bytes = 0;
+		ring->total_packets = 0;
+		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+		                      r_idx + 1);
+	}
+
+	/* disable interrupts on this vector only */
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
@@ -1167,29 +1341,42 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
 		if (adapter->itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rx_ring->v_idx);
+			ixgbe_irq_enable_queues(adapter,
+			                        ((u64)1 << q_vector->v_idx));
 	}
 
 	return work_done;
 }
 
 /**
- * ixgbe_clean_rxonly_many - msix (aka one shot) rx clean routine
+ * ixgbe_clean_rxtx_many - msix (aka one shot) rx clean routine
  * @napi: napi struct with our devices info in it
  * @budget: amount of work driver is allowed to do this pass, in packets
  *
  * This function will clean more than one rx queue associated with a
  * q_vector.
  **/
-static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
+static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 {
 	struct ixgbe_q_vector *q_vector =
 	                       container_of(napi, struct ixgbe_q_vector, napi);
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct ixgbe_ring *rx_ring = NULL;
+	struct ixgbe_ring *ring = NULL;
 	int work_done = 0, i;
 	long r_idx;
-	u16 enable_mask = 0;
+	bool tx_clean_complete = true;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		ring = &(adapter->tx_ring[r_idx]);
+#ifdef CONFIG_IXGBE_DCA
+		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+			ixgbe_update_tx_dca(adapter, ring);
+#endif
+		tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+		                      r_idx + 1);
+	}
 
 	/* attempt to distribute budget to each queue fairly, but don't allow
 	 * the budget to go below 1 because we'll exit polling */
@@ -1197,47 +1384,87 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
 	budget = max(budget, 1);
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
-		rx_ring = &(adapter->rx_ring[r_idx]);
+		ring = &(adapter->rx_ring[r_idx]);
 #ifdef CONFIG_IXGBE_DCA
 		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-			ixgbe_update_rx_dca(adapter, rx_ring);
+			ixgbe_update_rx_dca(adapter, ring);
 #endif
-		ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
-		enable_mask |= rx_ring->v_idx;
+		ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
 		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
 		                      r_idx + 1);
 	}
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	rx_ring = &(adapter->rx_ring[r_idx]);
+	ring = &(adapter->rx_ring[r_idx]);
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
 		if (adapter->itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, enable_mask);
+			ixgbe_irq_enable_queues(adapter,
+			                        ((u64)1 << q_vector->v_idx));
 		return 0;
 	}
 
 	return work_done;
 }
+
+/**
+ * ixgbe_clean_txonly - msix (aka one shot) tx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function is optimized for cleaning one queue only on a single
+ * q_vector!!!
+ **/
+static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
+{
+	struct ixgbe_q_vector *q_vector =
+	                       container_of(napi, struct ixgbe_q_vector, napi);
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring *tx_ring = NULL;
+	int work_done = 0;
+	long r_idx;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	tx_ring = &(adapter->tx_ring[r_idx]);
+#ifdef CONFIG_IXGBE_DCA
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+		ixgbe_update_tx_dca(adapter, tx_ring);
+#endif
+
+	if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
+		work_done = budget;
+
+	/* If all Rx work done, exit the polling mode */
+	if (work_done < budget) {
+		napi_complete(napi);
+		if (adapter->itr_setting & 1)
+			ixgbe_set_itr_msix(q_vector);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state))
+			ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	}
+
+	return work_done;
+}
+
 static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
                                      int r_idx)
 {
-	a->q_vector[v_idx].adapter = a;
-	set_bit(r_idx, a->q_vector[v_idx].rxr_idx);
-	a->q_vector[v_idx].rxr_count++;
-	a->rx_ring[r_idx].v_idx = 1 << v_idx;
+	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+
+	set_bit(r_idx, q_vector->rxr_idx);
+	q_vector->rxr_count++;
 }
 
 static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
-                                     int r_idx)
+                                     int t_idx)
 {
-	a->q_vector[v_idx].adapter = a;
-	set_bit(r_idx, a->q_vector[v_idx].txr_idx);
-	a->q_vector[v_idx].txr_count++;
-	a->tx_ring[r_idx].v_idx = 1 << v_idx;
+	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+
+	set_bit(t_idx, q_vector->txr_idx);
+	q_vector->txr_count++;
 }
 
 /**
@@ -1333,7 +1560,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
                          (!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \
                          &ixgbe_msix_clean_many)
 	for (vector = 0; vector < q_vectors; vector++) {
-		handler = SET_HANDLER(&adapter->q_vector[vector]);
+		handler = SET_HANDLER(adapter->q_vector[vector]);
 
 		if(handler == &ixgbe_msix_clean_rx) {
 			sprintf(adapter->name[vector], "%s-%s-%d",
@@ -1349,7 +1576,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 
 		err = request_irq(adapter->msix_entries[vector].vector,
 		                  handler, 0, adapter->name[vector],
-		                  &(adapter->q_vector[vector]));
+		                  adapter->q_vector[vector]);
 		if (err) {
 			DPRINTK(PROBE, ERR,
 			        "request_irq failed for MSIX interrupt "
@@ -1372,7 +1599,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 free_queue_irqs:
 	for (i = vector - 1; i >= 0; i--)
 		free_irq(adapter->msix_entries[--vector].vector,
-		         &(adapter->q_vector[i]));
+		         adapter->q_vector[i]);
 	adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
 	pci_disable_msix(adapter->pdev);
 	kfree(adapter->msix_entries);
@@ -1383,7 +1610,7 @@ out:
 
 static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_q_vector *q_vector = adapter->q_vector;
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
 	u8 current_itr;
 	u32 new_itr = q_vector->eitr;
 	struct ixgbe_ring *rx_ring = &adapter->rx_ring[0];
@@ -1416,14 +1643,13 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 	}
 
 	if (new_itr != q_vector->eitr) {
-		u32 itr_reg;
+		/* do an exponential smoothing */
+		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
 
 		/* save the algorithm value here, not the smoothed one */
 		q_vector->eitr = new_itr;
-		/* do an exponential smoothing */
-		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
-		itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
-		ixgbe_write_eitr(adapter, 0, itr_reg);
+
+		ixgbe_write_eitr(q_vector);
 	}
 
 	return;
@@ -1436,7 +1662,8 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
 {
 	u32 mask;
-	mask = IXGBE_EIMS_ENABLE_MASK;
+
+	mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
 		mask |= IXGBE_EIMS_GPI_SDP1;
 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
@@ -1444,16 +1671,12 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
 		mask |= IXGBE_EIMS_GPI_SDP1;
 		mask |= IXGBE_EIMS_GPI_SDP2;
 	}
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		mask |= IXGBE_EIMS_FLOW_DIR;
 
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		/* enable the rest of the queue vectors */
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1),
-		                (IXGBE_EIMS_RTX_QUEUE << 16));
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(2),
-		                ((IXGBE_EIMS_RTX_QUEUE << 16) |
-		                  IXGBE_EIMS_RTX_QUEUE));
-	}
+	ixgbe_irq_enable_queues(adapter, ~0);
 	IXGBE_WRITE_FLUSH(&adapter->hw);
 }
 
@@ -1467,6 +1690,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 	struct net_device *netdev = data;
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
 	u32 eicr;
 
 	/*
@@ -1494,13 +1718,13 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 
 	ixgbe_check_fan_failure(adapter, eicr);
 
-	if (napi_schedule_prep(&adapter->q_vector[0].napi)) {
+	if (napi_schedule_prep(&(q_vector->napi))) {
 		adapter->tx_ring[0].total_packets = 0;
 		adapter->tx_ring[0].total_bytes = 0;
 		adapter->rx_ring[0].total_packets = 0;
 		adapter->rx_ring[0].total_bytes = 0;
 		/* would disable interrupts here but EIAM disabled it */
-		__napi_schedule(&adapter->q_vector[0].napi);
+		__napi_schedule(&(q_vector->napi));
 	}
 
 	return IRQ_HANDLED;
@@ -1511,7 +1735,7 @@ static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
 	int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
 
 	for (i = 0; i < q_vectors; i++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
 		bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
 		bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
 		q_vector->rxr_count = 0;
@@ -1562,7 +1786,7 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
 		i--;
 		for (; i >= 0; i--) {
 			free_irq(adapter->msix_entries[i].vector,
-			         &(adapter->q_vector[i]));
+			         adapter->q_vector[i]);
 		}
 
 		ixgbe_reset_q_vectors(adapter);
@@ -1577,10 +1801,12 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
  **/
 static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 {
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+	} else {
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(2), ~0);
 	}
 	IXGBE_WRITE_FLUSH(&adapter->hw);
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -1592,18 +1818,6 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 	}
 }
 
-static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter)
-{
-	u32 mask = IXGBE_EIMS_RTX_QUEUE;
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask << 16);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(2),
-		                (mask << 16 | mask));
-	}
-	/* skip the flush */
-}
-
 /**
  * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
  *
@@ -1673,11 +1887,34 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
 	u32 srrctl;
 	int queue0 = 0;
 	unsigned long mask;
+	struct ixgbe_ring_feature *feature = adapter->ring_feature;
 
 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		queue0 = index;
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			int dcb_i = feature[RING_F_DCB].indices;
+			if (dcb_i == 8)
+				queue0 = index >> 4;
+			else if (dcb_i == 4)
+				queue0 = index >> 5;
+			else
+				dev_err(&adapter->pdev->dev, "Invalid DCB "
+				        "configuration\n");
+#ifdef IXGBE_FCOE
+			if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+				struct ixgbe_ring_feature *f;
+
+				rx_ring = &adapter->rx_ring[queue0];
+				f = &adapter->ring_feature[RING_F_FCOE];
+				if ((queue0 == 0) && (index > rx_ring->reg_idx))
+					queue0 = f->mask + index -
+					         rx_ring->reg_idx - 1;
+			}
+#endif /* IXGBE_FCOE */
+		} else {
+			queue0 = index;
+		}
 	} else {
-		mask = (unsigned long) adapter->ring_feature[RING_F_RSS].mask;
+		mask = (unsigned long) feature[RING_F_RSS].mask;
 		queue0 = index & mask;
 		index = index & mask;
 	}
@@ -1689,33 +1926,55 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
 	srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
 	srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
 
+	srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
+		  IXGBE_SRRCTL_BSIZEHDR_MASK;
+
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
-		u16 bufsz = IXGBE_RXBUFFER_2048;
-		/* grow the amount we can receive on large page machines */
-		if (bufsz < (PAGE_SIZE / 2))
-			bufsz = (PAGE_SIZE / 2);
-		/* cap the bufsz at our largest descriptor size */
-		bufsz = min((u16)IXGBE_MAX_RXBUFFER, bufsz);
-
-		srrctl |= bufsz >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
+		srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#else
+		srrctl |= (PAGE_SIZE / 2) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#endif
 		srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
-		srrctl |= ((IXGBE_RX_HDR_SIZE <<
-		            IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
-		           IXGBE_SRRCTL_BSIZEHDR_MASK);
 	} else {
+		srrctl |= ALIGN(rx_ring->rx_buf_len, 1024) >>
+			  IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 		srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
-
-		if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
-			srrctl |= IXGBE_RXBUFFER_2048 >>
-			          IXGBE_SRRCTL_BSIZEPKT_SHIFT;
-		else
-			srrctl |= rx_ring->rx_buf_len >>
-			          IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 	}
 
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl);
 }
 
+static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
+{
+	u32 mrqc = 0;
+	int mask;
+
+	if (!(adapter->hw.mac.type == ixgbe_mac_82599EB))
+		return mrqc;
+
+	mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED
+#ifdef CONFIG_IXGBE_DCB
+				 | IXGBE_FLAG_DCB_ENABLED
+#endif
+				);
+
+	switch (mask) {
+	case (IXGBE_FLAG_RSS_ENABLED):
+		mrqc = IXGBE_MRQC_RSSEN;
+		break;
+#ifdef CONFIG_IXGBE_DCB
+	case (IXGBE_FLAG_DCB_ENABLED):
+		mrqc = IXGBE_MRQC_RT8TCEN;
+		break;
+#endif /* CONFIG_IXGBE_DCB */
+	default:
+		break;
+	}
+
+	return mrqc;
+}
+
 /**
  * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
  * @adapter: board private structure
@@ -1736,11 +1995,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	u32 fctrl, hlreg0;
 	u32 reta = 0, mrqc = 0;
 	u32 rdrxctl;
+	u32 rscctrl;
 	int rx_buf_len;
 
 	/* Decide whether to use packet split mode or not */
 	adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
 
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+#endif /* IXGBE_FCOE */
+
 	/* Set the RX buffer length according to the mode */
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
 		rx_buf_len = IXGBE_RX_HDR_SIZE;
@@ -1749,11 +2014,13 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
 			              IXGBE_PSRTYPE_UDPHDR |
 			              IXGBE_PSRTYPE_IPV4HDR |
-			              IXGBE_PSRTYPE_IPV6HDR;
+			              IXGBE_PSRTYPE_IPV6HDR |
+			              IXGBE_PSRTYPE_L2HDR;
 			IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
 		}
 	} else {
-		if (netdev->mtu <= ETH_DATA_LEN)
+		if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+		    (netdev->mtu <= ETH_DATA_LEN))
 			rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 		else
 			rx_buf_len = ALIGN(max_frame, 1024);
@@ -1770,6 +2037,10 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
 	else
 		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+#endif
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 
 	rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
@@ -1777,8 +2048,10 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
 
-	/* Setup the HW Rx Head and Tail Descriptor Pointers and
-	 * the Base and Length of the Rx Descriptor Ring */
+	/*
+	 * Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		rdba = adapter->rx_ring[i].dma;
 		j = adapter->rx_ring[i].reg_idx;
@@ -1791,6 +2064,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		adapter->rx_ring[i].tail = IXGBE_RDT(j);
 		adapter->rx_ring[i].rx_buf_len = rx_buf_len;
 
+#ifdef IXGBE_FCOE
+		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+			struct ixgbe_ring_feature *f;
+			f = &adapter->ring_feature[RING_F_FCOE];
+			if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
+			    (i >= f->mask) && (i < f->mask + f->indices))
+				adapter->rx_ring[i].rx_buf_len =
+				        IXGBE_FCOE_JUMBO_FRAME_SIZE;
+		}
+
+#endif /* IXGBE_FCOE */
 		ixgbe_configure_srrctl(adapter, j);
 	}
 
@@ -1811,23 +2095,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	}
 
 	/* Program MRQC for the distribution of queues */
-	if (hw->mac.type == ixgbe_mac_82599EB) {
-		int mask = adapter->flags & (
-				IXGBE_FLAG_RSS_ENABLED
-				| IXGBE_FLAG_DCB_ENABLED
-				);
+	mrqc = ixgbe_setup_mrqc(adapter);
 
-		switch (mask) {
-		case (IXGBE_FLAG_RSS_ENABLED):
-			mrqc = IXGBE_MRQC_RSSEN;
-			break;
-		case (IXGBE_FLAG_DCB_ENABLED):
-			mrqc = IXGBE_MRQC_RT8TCEN;
-			break;
-		default:
-			break;
-		}
-	}
 	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
 		/* Fill out redirection table */
 		for (i = 0, j = 0; i < 128; i++, j++) {
@@ -1875,8 +2144,45 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	if (hw->mac.type == ixgbe_mac_82599EB) {
 		rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
 		rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
+		rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
 		IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
 	}
+
+	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+		/* Enable 82599 HW-RSC */
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			j = adapter->rx_ring[i].reg_idx;
+			rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
+			rscctrl |= IXGBE_RSCCTL_RSCEN;
+			/*
+			 * we must limit the number of descriptors so that the
+			 * total size of max desc * buf_len is not greater
+			 * than 65535
+			 */
+			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+#if (MAX_SKB_FRAGS > 16)
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+			} else {
+				if (rx_buf_len < IXGBE_RXBUFFER_4096)
+					rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+				else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+					rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+				else
+					rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+			}
+			IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
+		}
+		/* Disable RSC for ACK packets */
+		IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
+		   (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
+	}
 }
 
 static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
@@ -2015,11 +2321,7 @@ static void ixgbe_set_rx_mode(struct net_device *netdev)
 	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	/* reprogram secondary unicast list */
-	addr_count = netdev->uc_count;
-	if (addr_count)
-		addr_list = netdev->uc_list->dmi_addr;
-	hw->mac.ops.update_uc_addr_list(hw, addr_list, addr_count,
-	                                  ixgbe_addr_list_itr);
+	hw->mac.ops.update_uc_addr_list(hw, &netdev->uc_list);
 
 	/* reprogram multicast list */
 	addr_count = netdev->mc_count;
@@ -2041,13 +2343,16 @@ static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
 
 	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
 		struct napi_struct *napi;
-		q_vector = &adapter->q_vector[q_idx];
-		if (!q_vector->rxr_count)
-			continue;
+		q_vector = adapter->q_vector[q_idx];
 		napi = &q_vector->napi;
-		if ((adapter->flags & IXGBE_FLAG_MSIX_ENABLED) &&
-		    (q_vector->rxr_count > 1))
-			napi->poll = &ixgbe_clean_rxonly_many;
+		if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+			if (!q_vector->rxr_count || !q_vector->txr_count) {
+				if (q_vector->txr_count == 1)
+					napi->poll = &ixgbe_clean_txonly;
+				else if (q_vector->rxr_count == 1)
+					napi->poll = &ixgbe_clean_rxonly;
+			}
+		}
 
 		napi_enable(napi);
 	}
@@ -2064,9 +2369,7 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
 		q_vectors = 1;
 
 	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
-		q_vector = &adapter->q_vector[q_idx];
-		if (!q_vector->rxr_count)
-			continue;
+		q_vector = adapter->q_vector[q_idx];
 		napi_disable(&q_vector->napi);
 	}
 }
@@ -2124,6 +2427,7 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 static void ixgbe_configure(struct ixgbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
 	int i;
 
 	ixgbe_set_rx_mode(netdev);
@@ -2140,6 +2444,20 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
 	netif_set_gso_max_size(netdev, 65536);
 #endif
 
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		ixgbe_configure_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i].atr_sample_rate =
+			                               adapter->atr_sample_rate;
+		ixgbe_init_fdir_signature_82599(hw, adapter->fdir_pballoc);
+	} else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
+		ixgbe_init_fdir_perfect_82599(hw, adapter->fdir_pballoc);
+	}
+
 	ixgbe_configure_tx(adapter);
 	ixgbe_configure_rx(adapter);
 	for (i = 0; i < adapter->num_rx_queues; i++)
@@ -2294,6 +2612,13 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
 	}
 
+#ifdef IXGBE_FCOE
+	/* adjust max frame to be able to do baby jumbo for FCoE */
+	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	    (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
+		max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
+
+#endif /* IXGBE_FCOE */
 	mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
 	if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
 		mhadd &= ~IXGBE_MHADD_MFS_MASK;
@@ -2357,6 +2682,17 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	ixgbe_irq_enable(adapter);
 
 	/*
+	 * If this adapter has a fan, check to see if we had a failure
+	 * before we enabled the interrupt.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		if (esdp & IXGBE_ESDP_SDP1)
+			DPRINTK(DRV, CRIT,
+				"Fan has stopped, replace the adapter\n");
+	}
+
+	/*
 	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
 	 * arrived before interrupts were enabled.  We need to kick off
 	 * the SFP+ module setup first, then try to bring up link.
@@ -2378,6 +2714,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
 	}
 
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		set_bit(__IXGBE_FDIR_INIT_DONE,
+		        &(adapter->tx_ring[i].reinit_state));
+
 	/* enable transmits */
 	netif_tx_start_all_queues(netdev);
 
@@ -2404,20 +2744,37 @@ int ixgbe_up(struct ixgbe_adapter *adapter)
 	/* hardware has been reset, we need to reload some things */
 	ixgbe_configure(adapter);
 
-	ixgbe_napi_add_all(adapter);
-
 	return ixgbe_up_complete(adapter);
 }
 
 void ixgbe_reset(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
-	if (hw->mac.ops.init_hw(hw))
-		dev_err(&adapter->pdev->dev, "Hardware Error\n");
+	int err;
+
+	err = hw->mac.ops.init_hw(hw);
+	switch (err) {
+	case 0:
+	case IXGBE_ERR_SFP_NOT_PRESENT:
+		break;
+	case IXGBE_ERR_MASTER_REQUESTS_PENDING:
+		dev_err(&adapter->pdev->dev, "master disable timed out\n");
+		break;
+	case IXGBE_ERR_EEPROM_VERSION:
+		/* We are running on a pre-production device, log a warning */
+		dev_warn(&adapter->pdev->dev, "This device is a pre-production "
+		         "adapter/LOM.  Please be aware there may be issues "
+		         "associated with your hardware.  If you are "
+		         "experiencing problems please contact your Intel or "
+		         "hardware representative who provided you with this "
+		         "hardware.\n");
+		break;
+	default:
+		dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+	}
 
 	/* reprogram the RAR[0] in case user changed it. */
 	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
-
 }
 
 /**
@@ -2445,8 +2802,13 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 			rx_buffer_info->dma = 0;
 		}
 		if (rx_buffer_info->skb) {
-			dev_kfree_skb(rx_buffer_info->skb);
+			struct sk_buff *skb = rx_buffer_info->skb;
 			rx_buffer_info->skb = NULL;
+			do {
+				struct sk_buff *this = skb;
+				skb = skb->prev;
+				dev_kfree_skb(this);
+			} while (skb);
 		}
 		if (!rx_buffer_info->page)
 			continue;
@@ -2560,6 +2922,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	del_timer_sync(&adapter->watchdog_timer);
 	cancel_work_sync(&adapter->watchdog_task);
 
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		cancel_work_sync(&adapter->fdir_reinit_task);
+
 	/* disable transmits in the hardware now that interrupts are off */
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		j = adapter->tx_ring[i].reg_idx;
@@ -2575,13 +2941,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	netif_carrier_off(netdev);
 
-#ifdef CONFIG_IXGBE_DCA
-	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
-		adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
-		dca_remove_requester(&adapter->pdev->dev);
-	}
-
-#endif
 	if (!pci_channel_offline(adapter->pdev))
 		ixgbe_reset(adapter);
 	ixgbe_clean_all_tx_rings(adapter);
@@ -2589,13 +2948,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 #ifdef CONFIG_IXGBE_DCA
 	/* since we reset the hardware DCA settings were cleared */
-	if (dca_add_requester(&adapter->pdev->dev) == 0) {
-		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
-		/* always use CB2 mode, difference is masked
-		 * in the CB driver */
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2);
-		ixgbe_setup_dca(adapter);
-	}
+	ixgbe_setup_dca(adapter);
 #endif
 }
 
@@ -2620,7 +2973,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 	}
 #endif
 
-	tx_clean_complete = ixgbe_clean_tx_irq(adapter, adapter->tx_ring);
+	tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring);
 	ixgbe_clean_rx_irq(q_vector, adapter->rx_ring, &work_done, budget);
 
 	if (!tx_clean_complete)
@@ -2632,7 +2985,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 		if (adapter->itr_setting & 1)
 			ixgbe_set_itr(adapter);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			ixgbe_irq_enable_queues(adapter);
+			ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
 	}
 	return work_done;
 }
@@ -2668,17 +3021,15 @@ static void ixgbe_reset_task(struct work_struct *work)
 static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
 {
 	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_DCB];
 
-	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		adapter->ring_feature[RING_F_DCB].mask = 0x7 << 3;
-		adapter->num_rx_queues =
-		                      adapter->ring_feature[RING_F_DCB].indices;
-		adapter->num_tx_queues =
-		                      adapter->ring_feature[RING_F_DCB].indices;
-		ret = true;
-	} else {
-		ret = false;
-	}
+	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+		return ret;
+
+	f->mask = 0x7 << 3;
+	adapter->num_rx_queues = f->indices;
+	adapter->num_tx_queues = f->indices;
+	ret = true;
 
 	return ret;
 }
@@ -2695,13 +3046,12 @@ static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
 static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
 {
 	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_RSS];
 
 	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-		adapter->ring_feature[RING_F_RSS].mask = 0xF;
-		adapter->num_rx_queues =
-		                      adapter->ring_feature[RING_F_RSS].indices;
-		adapter->num_tx_queues =
-		                      adapter->ring_feature[RING_F_RSS].indices;
+		f->mask = 0xF;
+		adapter->num_rx_queues = f->indices;
+		adapter->num_tx_queues = f->indices;
 		ret = true;
 	} else {
 		ret = false;
@@ -2710,6 +3060,79 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
 	return ret;
 }
 
+/**
+ * ixgbe_set_fdir_queues: Allocate queues for Flow Director
+ * @adapter: board private structure to initialize
+ *
+ * Flow Director is an advanced Rx filter, attempting to get Rx flows back
+ * to the original CPU that initiated the Tx session.  This runs in addition
+ * to RSS, so if a packet doesn't match an FDIR filter, we can still spread the
+ * Rx load across CPUs using RSS.
+ *
+ **/
+static bool inline ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
+{
+	bool ret = false;
+	struct ixgbe_ring_feature *f_fdir = &adapter->ring_feature[RING_F_FDIR];
+
+	f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices);
+	f_fdir->mask = 0;
+
+	/* Flow Director must have RSS enabled */
+	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED &&
+	    ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	     (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)))) {
+		adapter->num_tx_queues = f_fdir->indices;
+		adapter->num_rx_queues = f_fdir->indices;
+		ret = true;
+	} else {
+		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+	}
+	return ret;
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
+ * @adapter: board private structure to initialize
+ *
+ * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
+ * The ring feature mask is not used as a mask for FCoE, as it can take any 8
+ * rx queues out of the max number of rx queues, instead, it is used as the
+ * index of the first rx queue used by FCoE.
+ *
+ **/
+static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
+{
+	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+	f->indices = min((int)num_online_cpus(), f->indices);
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+#ifdef CONFIG_IXGBE_DCB
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			DPRINTK(PROBE, INFO, "FCOE enabled with DCB \n");
+			ixgbe_set_dcb_queues(adapter);
+		}
+#endif
+		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+			DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
+			ixgbe_set_rss_queues(adapter);
+		}
+		/* adding FCoE rx rings to the end */
+		f->mask = adapter->num_rx_queues;
+		adapter->num_rx_queues += f->indices;
+		if (adapter->num_tx_queues == 0)
+			adapter->num_tx_queues = f->indices;
+
+		ret = true;
+	}
+
+	return ret;
+}
+
+#endif /* IXGBE_FCOE */
 /*
  * ixgbe_set_num_queues: Allocate queues for device, feature dependant
  * @adapter: board private structure to initialize
@@ -2723,11 +3146,19 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
  **/
 static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
 {
+#ifdef IXGBE_FCOE
+	if (ixgbe_set_fcoe_queues(adapter))
+		goto done;
+
+#endif /* IXGBE_FCOE */
 #ifdef CONFIG_IXGBE_DCB
 	if (ixgbe_set_dcb_queues(adapter))
 		goto done;
 
 #endif
+	if (ixgbe_set_fdir_queues(adapter))
+		goto done;
+
 	if (ixgbe_set_rss_queues(adapter))
 		goto done;
 
@@ -2778,9 +3209,6 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 		adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
-		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
-		ixgbe_set_num_queues(adapter);
 	} else {
 		adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
 		/*
@@ -2902,6 +3330,64 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
 #endif
 
 /**
+ * ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for Flow Director to the assigned rings.
+ *
+ **/
+static bool inline ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
+{
+	int i;
+	bool ret = false;
+
+	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED &&
+	    ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+	     (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i].reg_idx = i;
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i].reg_idx = i;
+		ret = true;
+	}
+
+	return ret;
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for FCoE mode to the assigned rings.
+ *
+ */
+static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
+{
+	int i, fcoe_i = 0;
+	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+#ifdef CONFIG_IXGBE_DCB
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			ixgbe_cache_ring_dcb(adapter);
+			fcoe_i = adapter->rx_ring[0].reg_idx + 1;
+		}
+#endif /* CONFIG_IXGBE_DCB */
+		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+			ixgbe_cache_ring_rss(adapter);
+			fcoe_i = f->mask;
+		}
+		for (i = 0; i < f->indices; i++, fcoe_i++)
+			adapter->rx_ring[f->mask + i].reg_idx = fcoe_i;
+		ret = true;
+	}
+	return ret;
+}
+
+#endif /* IXGBE_FCOE */
+/**
  * ixgbe_cache_ring_register - Descriptor ring to register mapping
  * @adapter: board private structure to initialize
  *
@@ -2918,11 +3404,19 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 	adapter->rx_ring[0].reg_idx = 0;
 	adapter->tx_ring[0].reg_idx = 0;
 
+#ifdef IXGBE_FCOE
+	if (ixgbe_cache_ring_fcoe(adapter))
+		return;
+
+#endif /* IXGBE_FCOE */
 #ifdef CONFIG_IXGBE_DCB
 	if (ixgbe_cache_ring_dcb(adapter))
 		return;
 
 #endif
+	if (ixgbe_cache_ring_fdir(adapter))
+		return;
+
 	if (ixgbe_cache_ring_rss(adapter))
 		return;
 }
@@ -3004,31 +3498,23 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	 * mean we disable MSI-X capabilities of the adapter. */
 	adapter->msix_entries = kcalloc(v_budget,
 	                                sizeof(struct msix_entry), GFP_KERNEL);
-	if (!adapter->msix_entries) {
-		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
-		ixgbe_set_num_queues(adapter);
-		kfree(adapter->tx_ring);
-		kfree(adapter->rx_ring);
-		err = ixgbe_alloc_queues(adapter);
-		if (err) {
-			DPRINTK(PROBE, ERR, "Unable to allocate memory "
-			        "for queues\n");
-			goto out;
-		}
+	if (adapter->msix_entries) {
+		for (vector = 0; vector < v_budget; vector++)
+			adapter->msix_entries[vector].entry = vector;
 
-		goto try_msi;
-	}
+		ixgbe_acquire_msix_vectors(adapter, v_budget);
 
-	for (vector = 0; vector < v_budget; vector++)
-		adapter->msix_entries[vector].entry = vector;
-
-	ixgbe_acquire_msix_vectors(adapter, v_budget);
+		if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+			goto out;
+	}
 
-	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
-		goto out;
+	adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+	adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+	adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+	adapter->atr_sample_rate = 0;
+	ixgbe_set_num_queues(adapter);
 
-try_msi:
 	err = pci_enable_msi(adapter->pdev);
 	if (!err) {
 		adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
@@ -3043,6 +3529,79 @@ out:
 	return err;
 }
 
+/**
+ * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
+{
+	int q_idx, num_q_vectors;
+	struct ixgbe_q_vector *q_vector;
+	int napi_vectors;
+	int (*poll)(struct napi_struct *, int);
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+		napi_vectors = adapter->num_rx_queues;
+		poll = &ixgbe_clean_rxtx_many;
+	} else {
+		num_q_vectors = 1;
+		napi_vectors = 1;
+		poll = &ixgbe_poll;
+	}
+
+	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+		q_vector = kzalloc(sizeof(struct ixgbe_q_vector), GFP_KERNEL);
+		if (!q_vector)
+			goto err_out;
+		q_vector->adapter = adapter;
+		q_vector->eitr = adapter->eitr_param;
+		q_vector->v_idx = q_idx;
+		netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
+		adapter->q_vector[q_idx] = q_vector;
+	}
+
+	return 0;
+
+err_out:
+	while (q_idx) {
+		q_idx--;
+		q_vector = adapter->q_vector[q_idx];
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+		adapter->q_vector[q_idx] = NULL;
+	}
+	return -ENOMEM;
+}
+
+/**
+ * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter)
+{
+	int q_idx, num_q_vectors;
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	else
+		num_q_vectors = 1;
+
+	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[q_idx];
+		adapter->q_vector[q_idx] = NULL;
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+	}
+}
+
 void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
 {
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -3074,18 +3633,25 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 	/* Number of supported queues */
 	ixgbe_set_num_queues(adapter);
 
-	err = ixgbe_alloc_queues(adapter);
-	if (err) {
-		DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
-		goto err_alloc_queues;
-	}
-
 	err = ixgbe_set_interrupt_capability(adapter);
 	if (err) {
 		DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
 		goto err_set_interrupt;
 	}
 
+	err = ixgbe_alloc_q_vectors(adapter);
+	if (err) {
+		DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
+		        "vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	err = ixgbe_alloc_queues(adapter);
+	if (err) {
+		DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+		goto err_alloc_queues;
+	}
+
 	DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
 	        "Tx Queue count = %u\n",
 	        (adapter->num_rx_queues > 1) ? "Enabled" :
@@ -3095,11 +3661,30 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 
 	return 0;
 
+err_alloc_queues:
+	ixgbe_free_q_vectors(adapter);
+err_alloc_q_vectors:
+	ixgbe_reset_interrupt_capability(adapter);
 err_set_interrupt:
+	return err;
+}
+
+/**
+ * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
+ * @adapter: board private structure to clear interrupt scheme on
+ *
+ * We go through and clear interrupt specific resources and reset the structure
+ * to pre-load conditions
+ **/
+void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
-err_alloc_queues:
-	return err;
+	adapter->tx_ring = NULL;
+	adapter->rx_ring = NULL;
+
+	ixgbe_free_q_vectors(adapter);
+	ixgbe_reset_interrupt_capability(adapter);
 }
 
 /**
@@ -3185,10 +3770,24 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	adapter->ring_feature[RING_F_RSS].indices = rss;
 	adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
 	adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES;
-	if (hw->mac.type == ixgbe_mac_82598EB)
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		if (hw->device_id == IXGBE_DEV_ID_82598AT)
+			adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
-	else if (hw->mac.type == ixgbe_mac_82599EB)
+	} else if (hw->mac.type == ixgbe_mac_82599EB) {
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
+		adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
+		adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->ring_feature[RING_F_FDIR].indices =
+		                                         IXGBE_MAX_FDIR_INDICES;
+		adapter->atr_sample_rate = 20;
+		adapter->fdir_pballoc = 0;
+#ifdef IXGBE_FCOE
+		adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+		adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+#endif /* IXGBE_FCOE */
+	}
 
 #ifdef CONFIG_IXGBE_DCB
 	/* Configure DCB traffic classes */
@@ -3203,6 +3802,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100;
 	adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100;
 	adapter->dcb_cfg.rx_pba_cfg = pba_equal;
+	adapter->dcb_cfg.pfc_mode_enable = false;
 	adapter->dcb_cfg.round_robin_enable = false;
 	adapter->dcb_set_bitmap = 0x00;
 	ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg,
@@ -3213,6 +3813,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	/* default flow control settings */
 	hw->fc.requested_mode = ixgbe_fc_full;
 	hw->fc.current_mode = ixgbe_fc_full;	/* init for ethtool output */
+#ifdef CONFIG_DCB
+	adapter->last_lfc_mode = hw->fc.current_mode;
+#endif
 	hw->fc.high_water = IXGBE_DEFAULT_FCRTH;
 	hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
 	hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
@@ -3503,6 +4106,8 @@ static int ixgbe_open(struct net_device *netdev)
 	if (test_bit(__IXGBE_TESTING, &adapter->state))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = ixgbe_setup_all_tx_resources(adapter);
 	if (err)
@@ -3515,8 +4120,6 @@ static int ixgbe_open(struct net_device *netdev)
 
 	ixgbe_configure(adapter);
 
-	ixgbe_napi_add_all(adapter);
-
 	err = ixgbe_request_irq(adapter);
 	if (err)
 		goto err_req_irq;
@@ -3568,55 +4171,6 @@ static int ixgbe_close(struct net_device *netdev)
 	return 0;
 }
 
-/**
- * ixgbe_napi_add_all - prep napi structs for use
- * @adapter: private struct
- *
- * helper function to napi_add each possible q_vector->napi
- */
-void ixgbe_napi_add_all(struct ixgbe_adapter *adapter)
-{
-	int q_idx, q_vectors;
-	struct net_device *netdev = adapter->netdev;
-	int (*poll)(struct napi_struct *, int);
-
-	/* check if we already have our netdev->napi_list populated */
-	if (&netdev->napi_list != netdev->napi_list.next)
-		return;
-
-	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-		poll = &ixgbe_clean_rxonly;
-		/* Only enable as many vectors as we have rx queues. */
-		q_vectors = adapter->num_rx_queues;
-	} else {
-		poll = &ixgbe_poll;
-		/* only one q_vector for legacy modes */
-		q_vectors = 1;
-	}
-
-	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[q_idx];
-		netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
-	}
-}
-
-void ixgbe_napi_del_all(struct ixgbe_adapter *adapter)
-{
-	int q_idx;
-	int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
-	/* legacy and MSI only use one vector */
-	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
-		q_vectors = 1;
-
-	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[q_idx];
-		if (!q_vector->rxr_count)
-			continue;
-		netif_napi_del(&q_vector->napi);
-	}
-}
-
 #ifdef CONFIG_PM
 static int ixgbe_resume(struct pci_dev *pdev)
 {
@@ -3626,7 +4180,8 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
-	err = pci_enable_device(pdev);
+
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
 				"suspend\n");
@@ -3634,8 +4189,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 	}
 	pci_set_master(pdev);
 
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
+	pci_wake_from_d3(pdev, false);
 
 	err = ixgbe_init_interrupt_scheme(adapter);
 	if (err) {
@@ -3679,11 +4233,7 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		ixgbe_free_all_tx_resources(adapter);
 		ixgbe_free_all_rx_resources(adapter);
 	}
-	ixgbe_reset_interrupt_capability(adapter);
-	ixgbe_napi_del_all(adapter);
-	INIT_LIST_HEAD(&netdev->napi_list);
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
+	ixgbe_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -3711,13 +4261,10 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
 	}
 
-	if (wufc && hw->mac.type == ixgbe_mac_82599EB) {
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
-	} else {
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
-	}
+	if (wufc && hw->mac.type == ixgbe_mac_82599EB)
+		pci_wake_from_d3(pdev, true);
+	else
+		pci_wake_from_d3(pdev, false);
 
 	*enable_wake = !!wufc;
 
@@ -3772,9 +4319,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
 
 	if (hw->mac.type == ixgbe_mac_82599EB) {
+		u64 rsc_count = 0;
 		for (i = 0; i < 16; i++)
 			adapter->hw_rx_no_dma_resources +=
 			                     IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			rsc_count += adapter->rx_ring[i].rsc_count;
+		adapter->rsc_count = rsc_count;
 	}
 
 	adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
@@ -3821,6 +4372,16 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 		IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
 		adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
 		adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+		adapter->stats.fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+		adapter->stats.fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+#ifdef IXGBE_FCOE
+		adapter->stats.fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
+		adapter->stats.fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
+		adapter->stats.fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
+		adapter->stats.fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
+		adapter->stats.fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
+		adapter->stats.fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
+#endif /* IXGBE_FCOE */
 	} else {
 		adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
 		adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
@@ -3888,64 +4449,43 @@ static void ixgbe_watchdog(unsigned long data)
 {
 	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
 	struct ixgbe_hw *hw = &adapter->hw;
+	u64 eics = 0;
+	int i;
 
-	/* Do the watchdog outside of interrupt context due to the lovely
-	 * delays that some of the newer hardware requires */
-	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
-		u64 eics = 0;
-		int i;
+	/*
+	 *  Do the watchdog outside of interrupt context due to the lovely
+	 * delays that some of the newer hardware requires
+	 */
 
-		for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++)
-			eics |= (1 << i);
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		goto watchdog_short_circuit;
 
-		/* Cause software interrupt to ensure rx rings are cleaned */
-		switch (hw->mac.type) {
-		case ixgbe_mac_82598EB:
-			if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-				IXGBE_WRITE_REG(hw, IXGBE_EICS, (u32)eics);
-			} else {
-				/*
-				 * for legacy and MSI interrupts don't set any
-				 * bits that are enabled for EIAM, because this
-				 * operation would set *both* EIMS and EICS for
-				 * any bit in EIAM
-				 */
-				IXGBE_WRITE_REG(hw, IXGBE_EICS,
-				     (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
-			}
-			break;
-		case ixgbe_mac_82599EB:
-			if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-				/*
-				 * EICS(0..15) first 0-15 q vectors
-				 * EICS[1] (16..31) q vectors 16-31
-				 * EICS[2] (0..31) q vectors 32-63
-				 */
-				IXGBE_WRITE_REG(hw, IXGBE_EICS,
-				                (u32)(eics & 0xFFFF));
-				IXGBE_WRITE_REG(hw, IXGBE_EICS_EX(1),
-				                (u32)(eics & 0xFFFF0000));
-				IXGBE_WRITE_REG(hw, IXGBE_EICS_EX(2),
-				                (u32)(eics >> 32));
-			} else {
-				/*
-				 * for legacy and MSI interrupts don't set any
-				 * bits that are enabled for EIAM, because this
-				 * operation would set *both* EIMS and EICS for
-				 * any bit in EIAM
-				 */
-				IXGBE_WRITE_REG(hw, IXGBE_EICS,
-				     (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
-			}
-			break;
-		default:
-			break;
-		}
-		/* Reset the timer */
-		mod_timer(&adapter->watchdog_timer,
-		          round_jiffies(jiffies + 2 * HZ));
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+		/*
+		 * for legacy and MSI interrupts don't set any bits
+		 * that are enabled for EIAM, because this operation
+		 * would set *both* EIMS and EICS for any bit in EIAM
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_EICS,
+			(IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
+		goto watchdog_reschedule;
 	}
 
+	/* get one bit for every active tx/rx interrupt vector */
+	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+		struct ixgbe_q_vector *qv = adapter->q_vector[i];
+		if (qv->rxr_count || qv->txr_count)
+			eics |= ((u64)1 << i);
+	}
+
+	/* Cause software interrupt to ensure rx rings are cleaned */
+	ixgbe_irq_rearm_queues(adapter, eics);
+
+watchdog_reschedule:
+	/* Reset the timer */
+	mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
+
+watchdog_short_circuit:
 	schedule_work(&adapter->watchdog_task);
 }
 
@@ -3999,6 +4539,30 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 }
 
 /**
+ * ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_fdir_reinit_task(struct work_struct *work)
+{
+	struct ixgbe_adapter *adapter = container_of(work,
+	                                             struct ixgbe_adapter,
+	                                             fdir_reinit_task);
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+
+	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_bit(__IXGBE_FDIR_INIT_DONE,
+			        &(adapter->tx_ring[i].reinit_state));
+	} else {
+		DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
+		        "ignored adding FDIR ATR filters \n");
+	}
+	/* Done FDIR Re-initialization, enable transmits */
+	netif_tx_start_all_queues(adapter->netdev);
+}
+
+/**
  * ixgbe_watchdog_task - worker thread to bring link up
  * @work: pointer to work_struct containing our data
  **/
@@ -4011,16 +4575,32 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 link_speed = adapter->link_speed;
 	bool link_up = adapter->link_up;
+	int i;
+	struct ixgbe_ring *tx_ring;
+	int some_tx_pending = 0;
 
 	adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
 
 	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
 		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up) {
+#ifdef CONFIG_DCB
+			if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+				for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+					hw->mac.ops.fc_enable(hw, i);
+			} else {
+				hw->mac.ops.fc_enable(hw, 0);
+			}
+#else
+			hw->mac.ops.fc_enable(hw, 0);
+#endif
+		}
+
 		if (link_up ||
 		    time_after(jiffies, (adapter->link_check_timeout +
 		                         IXGBE_TRY_LINK_TIMEOUT))) {
-			IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
 			adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+			IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
 		}
 		adapter->link_up = link_up;
 		adapter->link_speed = link_speed;
@@ -4068,6 +4648,25 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 		}
 	}
 
+	if (!netif_carrier_ok(netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			tx_ring = &adapter->tx_ring[i];
+			if (tx_ring->next_to_use != tx_ring->next_to_clean) {
+				some_tx_pending = 1;
+				break;
+			}
+		}
+
+		if (some_tx_pending) {
+			/* We've lost link, so the controller stops DMA,
+			 * but we've got queued Tx work that's never going
+			 * to get done, so reset controller to flush Tx.
+			 * (Do the reset outside of interrupt context).
+			 */
+			 schedule_work(&adapter->reset_task);
+		}
+	}
+
 	ixgbe_update_stats(adapter);
 	adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
 }
@@ -4196,12 +4795,18 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 					type_tucmd_mlhl |=
 					        IXGBE_ADVTXD_TUCMD_L4T_TCP;
+				else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+					type_tucmd_mlhl |=
+					        IXGBE_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			case cpu_to_be16(ETH_P_IPV6):
 				/* XXX what about other V6 headers?? */
 				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 					type_tucmd_mlhl |=
 					        IXGBE_ADVTXD_TUCMD_L4T_TCP;
+				else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+					type_tucmd_mlhl |=
+					        IXGBE_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			default:
 				if (unlikely(net_ratelimit())) {
@@ -4234,10 +4839,12 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 
 static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
                         struct ixgbe_ring *tx_ring,
-                        struct sk_buff *skb, unsigned int first)
+                        struct sk_buff *skb, u32 tx_flags,
+                        unsigned int first)
 {
 	struct ixgbe_tx_buffer *tx_buffer_info;
-	unsigned int len = skb_headlen(skb);
+	unsigned int len;
+	unsigned int total = skb->len;
 	unsigned int offset = 0, size, count = 0, i;
 	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned int f;
@@ -4252,16 +4859,22 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 
 	map = skb_shinfo(skb)->dma_maps;
 
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE)
+		/* excluding fcoe_crc_eof for FCoE */
+		total -= sizeof(struct fcoe_crc_eof);
+
+	len = min(skb_headlen(skb), total);
 	while (len) {
 		tx_buffer_info = &tx_ring->tx_buffer_info[i];
 		size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 		tx_buffer_info->length = size;
-		tx_buffer_info->dma = map[0] + offset;
+		tx_buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		tx_buffer_info->time_stamp = jiffies;
 		tx_buffer_info->next_to_watch = i;
 
 		len -= size;
+		total -= size;
 		offset += size;
 		count++;
 
@@ -4276,7 +4889,7 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 		struct skb_frag_struct *frag;
 
 		frag = &skb_shinfo(skb)->frags[f];
-		len = frag->size;
+		len = min((unsigned int)frag->size, total);
 		offset = 0;
 
 		while (len) {
@@ -4288,14 +4901,17 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 			size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 			tx_buffer_info->length = size;
-			tx_buffer_info->dma = map[f + 1] + offset;
+			tx_buffer_info->dma = map[f] + offset;
 			tx_buffer_info->time_stamp = jiffies;
 			tx_buffer_info->next_to_watch = i;
 
 			len -= size;
+			total -= size;
 			offset += size;
 			count++;
 		}
+		if (total == 0)
+			break;
 	}
 
 	tx_ring->tx_buffer_info[i].skb = skb;
@@ -4337,6 +4953,13 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
 		olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
 		                 IXGBE_ADVTXD_POPTS_SHIFT;
 
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+		olinfo_status |= IXGBE_ADVTXD_CC;
+		olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+		if (tx_flags & IXGBE_TX_FLAGS_FSO)
+			cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+	}
+
 	olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
 
 	i = tx_ring->next_to_use;
@@ -4366,6 +4989,58 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
 	writel(i, adapter->hw.hw_addr + tx_ring->tail);
 }
 
+static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
+	              int queue, u32 tx_flags)
+{
+	/* Right now, we support IPv4 only */
+	struct ixgbe_atr_input atr_input;
+	struct tcphdr *th;
+	struct udphdr *uh;
+	struct iphdr *iph = ip_hdr(skb);
+	struct ethhdr *eth = (struct ethhdr *)skb->data;
+	u16 vlan_id, src_port, dst_port, flex_bytes;
+	u32 src_ipv4_addr, dst_ipv4_addr;
+	u8 l4type = 0;
+
+	/* check if we're UDP or TCP */
+	if (iph->protocol == IPPROTO_TCP) {
+		th = tcp_hdr(skb);
+		src_port = th->source;
+		dst_port = th->dest;
+		l4type |= IXGBE_ATR_L4TYPE_TCP;
+		/* l4type IPv4 type is 0, no need to assign */
+	} else if(iph->protocol == IPPROTO_UDP) {
+		uh = udp_hdr(skb);
+		src_port = uh->source;
+		dst_port = uh->dest;
+		l4type |= IXGBE_ATR_L4TYPE_UDP;
+		/* l4type IPv4 type is 0, no need to assign */
+	} else {
+		/* Unsupported L4 header, just bail here */
+		return;
+	}
+
+	memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
+
+	vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
+	           IXGBE_TX_FLAGS_VLAN_SHIFT;
+	src_ipv4_addr = iph->saddr;
+	dst_ipv4_addr = iph->daddr;
+	flex_bytes = eth->h_proto;
+
+	ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
+	ixgbe_atr_set_src_port_82599(&atr_input, dst_port);
+	ixgbe_atr_set_dst_port_82599(&atr_input, src_port);
+	ixgbe_atr_set_flex_byte_82599(&atr_input, flex_bytes);
+	ixgbe_atr_set_l4type_82599(&atr_input, l4type);
+	/* src and dst are inverted, think how the receiver sees them */
+	ixgbe_atr_set_src_ipv4_82599(&atr_input, dst_ipv4_addr);
+	ixgbe_atr_set_dst_ipv4_82599(&atr_input, src_ipv4_addr);
+
+	/* This assumes the Rx queue and Tx queue are bound to the same CPU */
+	ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);
+}
+
 static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
                                  struct ixgbe_ring *tx_ring, int size)
 {
@@ -4400,6 +5075,9 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+		return smp_processor_id();
+
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
 		return 0;  /* All traffic should default to class 0 */
 
@@ -4433,10 +5111,16 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	}
-	/* three things can cause us to need a context descriptor */
+
+	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	    (skb->protocol == htons(ETH_P_FCOE)))
+		tx_flags |= IXGBE_TX_FLAGS_FCOE;
+
+	/* four things can cause us to need a context descriptor */
 	if (skb_is_gso(skb) ||
 	    (skb->ip_summed == CHECKSUM_PARTIAL) ||
-	    (tx_flags & IXGBE_TX_FLAGS_VLAN))
+	    (tx_flags & IXGBE_TX_FLAGS_VLAN) ||
+	    (tx_flags & IXGBE_TX_FLAGS_FCOE))
 		count++;
 
 	count += TXD_USE_COUNT(skb_headlen(skb));
@@ -4448,27 +5132,49 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		return NETDEV_TX_BUSY;
 	}
 
-	if (skb->protocol == htons(ETH_P_IP))
-		tx_flags |= IXGBE_TX_FLAGS_IPV4;
 	first = tx_ring->next_to_use;
-	tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
-	if (tso < 0) {
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-	if (tso)
-		tx_flags |= IXGBE_TX_FLAGS_TSO;
-	else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
-	         (skb->ip_summed == CHECKSUM_PARTIAL))
-		tx_flags |= IXGBE_TX_FLAGS_CSUM;
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+#ifdef IXGBE_FCOE
+		/* setup tx offload for FCoE */
+		tso = ixgbe_fso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+		if (tso < 0) {
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
+		if (tso)
+			tx_flags |= IXGBE_TX_FLAGS_FSO;
+#endif /* IXGBE_FCOE */
+	} else {
+		if (skb->protocol == htons(ETH_P_IP))
+			tx_flags |= IXGBE_TX_FLAGS_IPV4;
+		tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+		if (tso < 0) {
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
 
-	count = ixgbe_tx_map(adapter, tx_ring, skb, first);
+		if (tso)
+			tx_flags |= IXGBE_TX_FLAGS_TSO;
+		else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+			 (skb->ip_summed == CHECKSUM_PARTIAL))
+			tx_flags |= IXGBE_TX_FLAGS_CSUM;
+	}
 
+	count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first);
 	if (count) {
+		/* add the ATR filter if ATR is on */
+		if (tx_ring->atr_sample_rate) {
+			++tx_ring->atr_count;
+			if ((tx_ring->atr_count >= tx_ring->atr_sample_rate) &&
+		             test_bit(__IXGBE_FDIR_INIT_DONE,
+                                      &tx_ring->reinit_state)) {
+				ixgbe_atr(adapter, skb, tx_ring->queue_index,
+				          tx_flags);
+				tx_ring->atr_count = 0;
+			}
+		}
 		ixgbe_tx_queue(adapter, tx_ring, tx_flags, count, skb->len,
 		               hdr_len);
-		netdev->trans_start = jiffies;
 		ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
 
 	} else {
@@ -4519,6 +5225,82 @@ static int ixgbe_set_mac(struct net_device *netdev, void *p)
 	return 0;
 }
 
+static int
+ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 value;
+	int rc;
+
+	if (prtad != hw->phy.mdio.prtad)
+		return -EINVAL;
+	rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
+	if (!rc)
+		rc = value;
+	return rc;
+}
+
+static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
+			    u16 addr, u16 value)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (prtad != hw->phy.mdio.prtad)
+		return -EINVAL;
+	return hw->phy.ops.write_reg(hw, addr, devad, value);
+}
+
+static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
+}
+
+/**
+ * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
+ * netdev->dev_addr_list
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_add_sanmac_netdev(struct net_device *dev)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	if (is_valid_ether_addr(mac->san_addr)) {
+		rtnl_lock();
+		err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+	return err;
+}
+
+/**
+ * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
+ * netdev->dev_addr_list
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_del_sanmac_netdev(struct net_device *dev)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	if (is_valid_ether_addr(mac->san_addr)) {
+		rtnl_lock();
+		err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+	return err;
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
@@ -4552,9 +5334,14 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_vlan_rx_register	= ixgbe_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= ixgbe_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= ixgbe_vlan_rx_kill_vid,
+	.ndo_do_ioctl		= ixgbe_ioctl,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ixgbe_netpoll,
 #endif
+#ifdef IXGBE_FCOE
+	.ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
+	.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
+#endif /* IXGBE_FCOE */
 };
 
 /**
@@ -4577,9 +5364,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
 	static int cards_found;
 	int i, err, pci_using_dac;
+#ifdef IXGBE_FCOE
+	u16 device_caps;
+#endif
 	u32 part_num, eec;
 
-	err = pci_enable_device(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
 
@@ -4599,9 +5389,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		pci_using_dac = 0;
 	}
 
-	err = pci_request_regions(pdev, ixgbe_driver_name);
+	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+	                                   IORESOURCE_MEM), ixgbe_driver_name);
 	if (err) {
-		dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err);
+		dev_err(&pdev->dev,
+		        "pci_request_selected_regions failed 0x%x\n", err);
 		goto err_pci_reg;
 	}
 
@@ -4665,6 +5457,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	/* PHY */
 	memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
 	hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+	/* ixgbe_identify_phy_generic will set prtad and mmds properly */
+	hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
+	hw->phy.mdio.mmds = 0;
+	hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	hw->phy.mdio.dev = netdev;
+	hw->phy.mdio.mdio_read = ixgbe_mdio_read;
+	hw->phy.mdio.mdio_write = ixgbe_mdio_write;
 
 	/* set up this timer and work struct before calling get_invariants
 	 * which might start the timer
@@ -4682,29 +5481,42 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->sfp_config_module_task,
 	          ixgbe_sfp_config_module_task);
 
-	err = ii->get_invariants(hw);
-	if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
-		/* start a kernel thread to watch for a module to arrive */
-		set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-		mod_timer(&adapter->sfp_timer,
-		          round_jiffies(jiffies + (2 * HZ)));
-		err = 0;
-	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		DPRINTK(PROBE, ERR, "failed to load because an "
-		        "unsupported SFP+ module type was detected.\n");
-		goto err_hw_init;
-	} else if (err) {
-		goto err_hw_init;
-	}
+	ii->get_invariants(hw);
 
 	/* setup the private structure */
 	err = ixgbe_sw_init(adapter);
 	if (err)
 		goto err_sw_init;
 
+	/*
+	 * If there is a fan on this device and it has failed log the
+	 * failure.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		if (esdp & IXGBE_ESDP_SDP1)
+			DPRINTK(PROBE, CRIT,
+				"Fan has stopped, replace the adapter\n");
+	}
+
 	/* reset_hw fills in the perm_addr as well */
 	err = hw->mac.ops.reset_hw(hw);
-	if (err) {
+	if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
+	    hw->mac.type == ixgbe_mac_82598EB) {
+		/*
+		 * Start a kernel thread to watch for a module to arrive.
+		 * Only do this for 82598, since 82599 will generate
+		 * interrupts on module arrival.
+		 */
+		set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+		mod_timer(&adapter->sfp_timer,
+			  round_jiffies(jiffies + (2 * HZ)));
+		err = 0;
+	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+		dev_err(&adapter->pdev->dev, "failed to load because an "
+		        "unsupported SFP+ module type was detected.\n");
+		goto err_sw_init;
+	} else if (err) {
 		dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
 		goto err_sw_init;
 	}
@@ -4720,6 +5532,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_TSO6;
 	netdev->features |= NETIF_F_GRO;
 
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+		netdev->features |= NETIF_F_SCTP_CSUM;
+
 	netdev->vlan_features |= NETIF_F_TSO;
 	netdev->vlan_features |= NETIF_F_TSO6;
 	netdev->vlan_features |= NETIF_F_IP_CSUM;
@@ -4732,9 +5547,32 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->dcbnl_ops = &dcbnl_ops;
 #endif
 
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+		if (hw->mac.ops.get_device_caps) {
+			hw->mac.ops.get_device_caps(hw, &device_caps);
+			if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
+				netdev->features |= NETIF_F_FCOE_CRC;
+				netdev->features |= NETIF_F_FSO;
+				netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+				DPRINTK(DRV, INFO, "FCoE enabled, "
+					"disabling Flow Director\n");
+				adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+				adapter->flags &=
+				        ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+				adapter->atr_sample_rate = 0;
+			} else {
+				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+			}
+		}
+	}
+#endif /* IXGBE_FCOE */
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
+	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+		netdev->features |= NETIF_F_LRO;
+
 	/* make sure the EEPROM is good */
 	if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
 		dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
@@ -4766,6 +5604,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	case IXGBE_DEV_ID_82599_KX4:
 		adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
 		                IXGBE_WUFC_MC | IXGBE_WUFC_BC);
+		/* Enable ACPI wakeup in GRC */
+		IXGBE_WRITE_REG(hw, IXGBE_GRC,
+		             (IXGBE_READ_REG(hw, IXGBE_GRC) & ~IXGBE_GRC_APME));
 		break;
 	default:
 		adapter->wol = 0;
@@ -4774,6 +5615,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	device_init_wakeup(&adapter->pdev->dev, true);
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
+	/* pick up the PCI bus settings for reporting later */
+	hw->mac.ops.get_bus_info(hw);
+
 	/* print bus type/speed/width info */
 	dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
 	        ((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
@@ -4805,24 +5649,37 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
 
 	/* reset the hardware with the new settings */
-	hw->mac.ops.start_hw(hw);
-
-	netif_carrier_off(netdev);
+	err = hw->mac.ops.start_hw(hw);
 
+	if (err == IXGBE_ERR_EEPROM_VERSION) {
+		/* We are running on a pre-production device, log a warning */
+		dev_warn(&pdev->dev, "This device is a pre-production "
+		         "adapter/LOM.  Please be aware there may be issues "
+		         "associated with your hardware.  If you are "
+		         "experiencing problems please contact your Intel or "
+		         "hardware representative who provided you with this "
+		         "hardware.\n");
+	}
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task);
+
 #ifdef CONFIG_IXGBE_DCA
 	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
-		/* always use CB2 mode, difference is masked
-		 * in the CB driver */
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2);
 		ixgbe_setup_dca(adapter);
 	}
 #endif
+	/* add san mac addr to netdev */
+	ixgbe_add_sanmac_netdev(netdev);
 
 	dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
 	cards_found++;
@@ -4830,9 +5687,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 err_register:
 	ixgbe_release_hw_control(adapter);
-err_hw_init:
+	ixgbe_clear_interrupt_scheme(adapter);
 err_sw_init:
-	ixgbe_reset_interrupt_capability(adapter);
 err_eeprom:
 	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
 	del_timer_sync(&adapter->sfp_timer);
@@ -4843,7 +5699,8 @@ err_eeprom:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, pci_select_bars(pdev,
+	                             IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -4877,6 +5734,9 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->sfp_task);
 	cancel_work_sync(&adapter->multispeed_fiber_task);
 	cancel_work_sync(&adapter->sfp_config_module_task);
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		cancel_work_sync(&adapter->fdir_reinit_task);
 	flush_scheduled_work();
 
 #ifdef CONFIG_IXGBE_DCA
@@ -4887,19 +5747,27 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	}
 
 #endif
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		ixgbe_cleanup_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+
+	/* remove the added san mac */
+	ixgbe_del_sanmac_netdev(netdev);
+
 	if (netdev->reg_state == NETREG_REGISTERED)
 		unregister_netdev(netdev);
 
-	ixgbe_reset_interrupt_capability(adapter);
+	ixgbe_clear_interrupt_scheme(adapter);
 
 	ixgbe_release_hw_control(adapter);
 
 	iounmap(adapter->hw.hw_addr);
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, pci_select_bars(pdev,
+	                             IORESOURCE_MEM));
 
 	DPRINTK(PROBE, INFO, "complete\n");
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
 
 	free_netdev(netdev);
 
@@ -4927,6 +5795,9 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		ixgbe_down(adapter);
 	pci_disable_device(pdev);
@@ -4948,7 +5819,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 	pci_ers_result_t result;
 	int err;
 
-	if (pci_enable_device(pdev)) {
+	if (pci_enable_device_mem(pdev)) {
 		DPRINTK(PROBE, ERR,
 		        "Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
@@ -4956,8 +5827,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
 
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
+		pci_wake_from_d3(pdev, false);
 
 		ixgbe_reset(adapter);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 14e9606aa3b..453e966762f 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -44,7 +44,6 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
 static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
 static bool ixgbe_get_i2c_data(u32 *i2cctl);
 static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
 
@@ -61,8 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
-			if (ixgbe_validate_phy_addr(hw, phy_addr)) {
-				hw->phy.addr = phy_addr;
+			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
 				        ixgbe_get_phy_type_from_id(hw->phy.id);
@@ -78,26 +76,6 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_validate_phy_addr - Determines phy address is valid
- *  @hw: pointer to hardware structure
- *
- **/
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
-{
-	u16 phy_id = 0;
-	bool valid = false;
-
-	hw->phy.addr = phy_addr;
-	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
-	                     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
-
-	if (phy_id != 0xFFFF && phy_id != 0x0)
-		valid = true;
-
-	return valid;
-}
-
-/**
  *  ixgbe_get_phy_id - Get the phy type
  *  @hw: pointer to hardware structure
  *
@@ -108,14 +86,12 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
 	u16 phy_id_high = 0;
 	u16 phy_id_low = 0;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
 	                              &phy_id_high);
 
 	if (status == 0) {
 		hw->phy.id = (u32)(phy_id_high << 16);
-		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
-		                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+		status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
 		                              &phy_id_low);
 		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
 		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
@@ -160,9 +136,8 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 	 * Perform soft PHY reset to the PHY_XS.
 	 * This will cause a soft reset to the PHY
 	 */
-	return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-	                             IXGBE_MDIO_PHY_XS_DEV_TYPE,
-	                             IXGBE_MDIO_PHY_XS_RESET);
+	return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+				     MDIO_CTRL1_RESET);
 }
 
 /**
@@ -192,7 +167,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 		/* Setup and write the address cycle command */
 		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 		           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-		           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		           (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 		           (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 
 		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -223,7 +198,8 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 			 */
 			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 			           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-			           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			           (hw->phy.mdio.prtad <<
+				    IXGBE_MSCA_PHY_ADDR_SHIFT) |
 			           (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
 
 			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -292,7 +268,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 		/* Setup and write the address cycle command */
 		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 		           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-		           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		           (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 		           (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 
 		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -323,7 +299,8 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 			 */
 			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 			           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-			           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			           (hw->phy.mdio.prtad <<
+				    IXGBE_MSCA_PHY_ADDR_SHIFT) |
 			           (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
 
 			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -365,7 +342,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 	s32 status = IXGBE_NOT_IMPLEMENTED;
 	u32 time_out;
 	u32 max_time_out = 10;
-	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+	u16 autoneg_reg;
 
 	/*
 	 * Set advertisement settings in PHY based on autoneg_advertised
@@ -373,36 +350,31 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 	 * tnx devices cannot be "forced" to a autoneg 10G and fail.  But can
 	 * for a 1G.
 	 */
-	hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
-	                     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+	hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg);
 
 	if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
-		autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
+		autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
 	else
-		autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
+		autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
 
-	hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
-	                      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+	hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg);
 
 	/* Restart PHY autonegotiation and wait for completion */
-	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
-	                     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg);
 
-	autoneg_reg |= IXGBE_MII_RESTART;
+	autoneg_reg |= MDIO_AN_CTRL1_RESTART;
 
-	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
-	                      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg);
 
 	/* Wait for autonegotiation to finish */
 	for (time_out = 0; time_out < max_time_out; time_out++) {
 		udelay(10);
 		/* Restart PHY autonegotiation and wait for completion */
-		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-		                              IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 		                              &autoneg_reg);
 
-		autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
-		if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
+		autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
+		if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
 			status = 0;
 			break;
 		}
@@ -457,23 +429,21 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 	s32 ret_val = 0;
 	u32 i;
 
-	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-	                     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
 
 	/* reset the PHY and poll for completion */
-	hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-	                      IXGBE_MDIO_PHY_XS_DEV_TYPE,
-	                      (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+	                      (phy_data | MDIO_CTRL1_RESET));
 
 	for (i = 0; i < 100; i++) {
-		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-		                     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
-		if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+		hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+		                     &phy_data);
+		if ((phy_data & MDIO_CTRL1_RESET) == 0)
 			break;
 		msleep(10);
 	}
 
-	if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+	if ((phy_data & MDIO_CTRL1_RESET) != 0) {
 		hw_dbg(hw, "PHY reset did not complete.\n");
 		ret_val = IXGBE_ERR_PHY;
 		goto out;
@@ -509,7 +479,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 			for (i = 0; i < edata; i++) {
 				hw->eeprom.ops.read(hw, data_offset, &eword);
 				hw->phy.ops.write_reg(hw, phy_offset,
-				                      IXGBE_TWINAX_DEV, eword);
+				                      MDIO_MMD_PMAPMD, eword);
 				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
 				       phy_offset);
 				data_offset++;
@@ -552,18 +522,30 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
 	u8 identifier = 0;
 	u8 comp_codes_1g = 0;
 	u8 comp_codes_10g = 0;
 	u8 oui_bytes[3] = {0, 0, 0};
-	u8 transmission_media = 0;
+	u8 cable_tech = 0;
 	u16 enforce_sfp = 0;
 
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		goto out;
+	}
+
 	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
 	                                     &identifier);
 
-	if (status == IXGBE_ERR_SFP_NOT_PRESENT) {
+	if (status == IXGBE_ERR_SFP_NOT_PRESENT || status == IXGBE_ERR_I2C) {
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
 		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		if (hw->phy.type != ixgbe_phy_nl) {
+			hw->phy.id = 0;
+			hw->phy.type = ixgbe_phy_unknown;
+		}
 		goto out;
 	}
 
@@ -572,8 +554,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		                            &comp_codes_1g);
 		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
 		                            &comp_codes_10g);
-		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
-		                            &transmission_media);
+		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
+		                            &cable_tech);
 
 		/* ID Module
 		 * =========
@@ -586,7 +568,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		 * 6    SFP_SR/LR_CORE1 - 82599-specific
 		 */
 		if (hw->mac.type == ixgbe_mac_82598EB) {
-			if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 				hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
 			else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 				hw->phy.sfp_type = ixgbe_sfp_type_sr;
@@ -595,7 +577,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			else
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 		} else if (hw->mac.type == ixgbe_mac_82599EB) {
-			if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
 					             ixgbe_sfp_type_da_cu_core0;
@@ -620,8 +602,19 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 		}
 
+		if (hw->phy.sfp_type != stored_sfp_type)
+			hw->phy.sfp_setup_needed = true;
+
+		/* Determine if the SFP+ PHY is dual speed or not. */
+		hw->phy.multispeed_fiber = false;
+		if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+		   (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+		   ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+		   (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+			hw->phy.multispeed_fiber = true;
+
 		/* Determine PHY vendor */
-		if (hw->phy.type == ixgbe_phy_unknown) {
+		if (hw->phy.type != ixgbe_phy_nl) {
 			hw->phy.id = identifier;
 			hw->phy.ops.read_i2c_eeprom(hw,
 			                            IXGBE_SFF_VENDOR_OUI_BYTE0,
@@ -640,8 +633,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
 			switch (vendor_oui) {
 			case IXGBE_SFF_VENDOR_OUI_TYCO:
-				if (transmission_media &
-				    IXGBE_SFF_TWIN_AX_CAPABLE)
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 					hw->phy.type = ixgbe_phy_tw_tyco;
 				break;
 			case IXGBE_SFF_VENDOR_OUI_FTL:
@@ -654,31 +646,42 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				hw->phy.type = ixgbe_phy_sfp_intel;
 				break;
 			default:
-				if (transmission_media &
-				    IXGBE_SFF_TWIN_AX_CAPABLE)
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 					hw->phy.type = ixgbe_phy_tw_unknown;
 				else
 					hw->phy.type = ixgbe_phy_sfp_unknown;
 				break;
 			}
 		}
-		if (hw->mac.type == ixgbe_mac_82598EB ||
-		    (hw->phy.sfp_type != ixgbe_sfp_type_sr &&
-		     hw->phy.sfp_type != ixgbe_sfp_type_lr &&
-		     hw->phy.sfp_type != ixgbe_sfp_type_srlr_core0 &&
-		     hw->phy.sfp_type != ixgbe_sfp_type_srlr_core1)) {
+
+		/* All passive DA cables are supported */
+		if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+			status = 0;
+			goto out;
+		}
+
+		/* 1G SFP modules are not supported */
+		if (comp_codes_10g == 0) {
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+
+		/* Anything else 82598-based is supported */
+		if (hw->mac.type == ixgbe_mac_82598EB) {
 			status = 0;
 			goto out;
 		}
 
-		hw->eeprom.ops.read(hw, IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET,
-		                    &enforce_sfp);
-		if (!(enforce_sfp & IXGBE_PHY_ALLOW_ANY_SFP)) {
+		/* This is guaranteed to be 82599, no need to check for NULL */
+		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
 			/* Make sure we're a supported PHY type */
 			if (hw->phy.type == ixgbe_phy_sfp_intel) {
 				status = 0;
 			} else {
 				hw_dbg(hw, "SFP+ module not supported\n");
+				hw->phy.type = ixgbe_phy_sfp_unsupported;
 				status = IXGBE_ERR_SFP_NOT_SUPPORTED;
 			}
 		} else {
@@ -1279,7 +1282,7 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 		udelay(10);
 		status = hw->phy.ops.read_reg(hw,
 		                        IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
-		                        IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					MDIO_MMD_VEND1,
 		                        &phy_data);
 		phy_link = phy_data &
 		           IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
@@ -1307,8 +1310,7 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
 {
 	s32 status = 0;
 
-	status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
-	                              IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1,
 	                              firmware_version);
 
 	return status;
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index cc5f1b3287e..9b700f5bf1e 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -39,11 +39,12 @@
 #define IXGBE_SFF_VENDOR_OUI_BYTE2   0x27
 #define IXGBE_SFF_1GBE_COMP_CODES    0x6
 #define IXGBE_SFF_10GBE_COMP_CODES   0x3
-#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+#define IXGBE_SFF_CABLE_TECHNOLOGY   0x8
 
 /* Bitmasks */
-#define IXGBE_SFF_TWIN_AX_CAPABLE            0x80
+#define IXGBE_SFF_DA_PASSIVE_CABLE           0x4
 #define IXGBE_SFF_1GBASESX_CAPABLE           0x1
+#define IXGBE_SFF_1GBASELX_CAPABLE           0x2
 #define IXGBE_SFF_10GBASESR_CAPABLE          0x10
 #define IXGBE_SFF_10GBASELR_CAPABLE          0x20
 #define IXGBE_I2C_EEPROM_READ_MASK           0x100
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 030ff0a9ea6..fa87309dc08 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -29,6 +29,8 @@
 #define _IXGBE_TYPE_H_
 
 #include <linux/types.h>
+#include <linux/mdio.h>
+#include <linux/list.h>
 
 /* Vendor ID */
 #define IXGBE_INTEL_VENDOR_ID   0x8086
@@ -45,9 +47,9 @@
 #define IXGBE_DEV_ID_82598_DA_DUAL_PORT  0x10F1
 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
 #define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
-#define IXGBE_DEV_ID_82599               0x10D8
 #define IXGBE_DEV_ID_82599_KX4           0x10F7
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
+#define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
@@ -229,6 +231,34 @@
 #define IXGBE_RETA(_i)  (0x05C00 + ((_i) * 4))  /* 32 of these (0-31) */
 #define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4))  /* 10 of these (0-9) */
 
+/* Flow Director registers */
+#define IXGBE_FDIRCTRL  0x0EE00
+#define IXGBE_FDIRHKEY  0x0EE68
+#define IXGBE_FDIRSKEY  0x0EE6C
+#define IXGBE_FDIRDIP4M 0x0EE3C
+#define IXGBE_FDIRSIP4M 0x0EE40
+#define IXGBE_FDIRTCPM  0x0EE44
+#define IXGBE_FDIRUDPM  0x0EE48
+#define IXGBE_FDIRIP6M  0x0EE74
+#define IXGBE_FDIRM     0x0EE70
+
+/* Flow Director Stats registers */
+#define IXGBE_FDIRFREE  0x0EE38
+#define IXGBE_FDIRLEN   0x0EE4C
+#define IXGBE_FDIRUSTAT 0x0EE50
+#define IXGBE_FDIRFSTAT 0x0EE54
+#define IXGBE_FDIRMATCH 0x0EE58
+#define IXGBE_FDIRMISS  0x0EE5C
+
+/* Flow Director Programming registers */
+#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
+#define IXGBE_FDIRIPSA      0x0EE18
+#define IXGBE_FDIRIPDA      0x0EE1C
+#define IXGBE_FDIRPORT      0x0EE20
+#define IXGBE_FDIRVLAN      0x0EE24
+#define IXGBE_FDIRHASH      0x0EE28
+#define IXGBE_FDIRCMD       0x0EE2C
+
 /* Transmit DMA registers */
 #define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
 #define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
@@ -443,6 +473,21 @@
 
 #define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE    0x4
 
+/* HW RSC registers */
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+                          (0x0D02C + ((_i - 64) * 0x40)))
+#define IXGBE_RSCDBU      0x03028
+#define IXGBE_RSCCTL_RSCEN          0x01
+#define IXGBE_RSCCTL_MAXDESC_1      0x00
+#define IXGBE_RSCCTL_MAXDESC_4      0x04
+#define IXGBE_RSCCTL_MAXDESC_8      0x08
+#define IXGBE_RSCCTL_MAXDESC_16     0x0C
+#define IXGBE_RXDADV_RSCCNT_SHIFT     17
+#define IXGBE_GPIE_RSC_DELAY_SHIFT    11
+#define IXGBE_RXDADV_RSCCNT_MASK    0x001E0000
+#define IXGBE_RSCDBU_RSCACKDIS      0x00000080
+#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000
+
 /* DCB registers */
 #define IXGBE_RTRPCS      0x02430
 #define IXGBE_RTTDCS      0x04900
@@ -462,6 +507,63 @@
 #define IXGBE_RTTDTECC_NO_BCN   0x00000100
 #define IXGBE_RTTBCNRC    0x04984
 
+/* FCoE registers */
+#define IXGBE_FCPTRL    0x02410 /* FC User Desc. PTR Low */
+#define IXGBE_FCPTRH    0x02414 /* FC USer Desc. PTR High */
+#define IXGBE_FCBUFF    0x02418 /* FC Buffer Control */
+#define IXGBE_FCDMARW   0x02420 /* FC Receive DMA RW */
+#define IXGBE_FCINVST0  0x03FC0 /* FC Invalid DMA Context Status Reg 0 */
+#define IXGBE_FCINVST(_i)       (IXGBE_FCINVST0 + ((_i) * 4))
+#define IXGBE_FCBUFF_VALID      (1 << 0)   /* DMA Context Valid */
+#define IXGBE_FCBUFF_BUFFSIZE   (3 << 3)   /* User Buffer Size */
+#define IXGBE_FCBUFF_WRCONTX    (1 << 7)   /* 0: Initiator, 1: Target */
+#define IXGBE_FCBUFF_BUFFCNT    0x0000ff00 /* Number of User Buffers */
+#define IXGBE_FCBUFF_OFFSET     0xffff0000 /* User Buffer Offset */
+#define IXGBE_FCBUFF_BUFFSIZE_SHIFT  3
+#define IXGBE_FCBUFF_BUFFCNT_SHIFT   8
+#define IXGBE_FCBUFF_OFFSET_SHIFT    16
+#define IXGBE_FCDMARW_WE        (1 << 14)   /* Write enable */
+#define IXGBE_FCDMARW_RE        (1 << 15)   /* Read enable */
+#define IXGBE_FCDMARW_FCOESEL   0x000001ff  /* FC X_ID: 11 bits */
+#define IXGBE_FCDMARW_LASTSIZE  0xffff0000  /* Last User Buffer Size */
+#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16
+
+/* FCoE SOF/EOF */
+#define IXGBE_TEOFF     0x04A94 /* Tx FC EOF */
+#define IXGBE_TSOFF     0x04A98 /* Tx FC SOF */
+#define IXGBE_REOFF     0x05158 /* Rx FC EOF */
+#define IXGBE_RSOFF     0x051F8 /* Rx FC SOF */
+/* FCoE Filter Context Registers */
+#define IXGBE_FCFLT     0x05108 /* FC FLT Context */
+#define IXGBE_FCFLTRW   0x05110 /* FC Filter RW Control */
+#define IXGBE_FCPARAM   0x051d8 /* FC Offset Parameter */
+#define IXGBE_FCFLT_VALID       (1 << 0)   /* Filter Context Valid */
+#define IXGBE_FCFLT_FIRST       (1 << 1)   /* Filter First */
+#define IXGBE_FCFLT_SEQID       0x00ff0000 /* Sequence ID */
+#define IXGBE_FCFLT_SEQCNT      0xff000000 /* Sequence Count */
+#define IXGBE_FCFLTRW_RVALDT    (1 << 13)  /* Fast Re-Validation */
+#define IXGBE_FCFLTRW_WE        (1 << 14)  /* Write Enable */
+#define IXGBE_FCFLTRW_RE        (1 << 15)  /* Read Enable */
+/* FCoE Receive Control */
+#define IXGBE_FCRXCTRL  0x05100 /* FC Receive Control */
+#define IXGBE_FCRXCTRL_FCOELLI  (1 << 0)   /* Low latency interrupt */
+#define IXGBE_FCRXCTRL_SAVBAD   (1 << 1)   /* Save Bad Frames */
+#define IXGBE_FCRXCTRL_FRSTRDH  (1 << 2)   /* EN 1st Read Header */
+#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3)   /* EN Last Header in Seq */
+#define IXGBE_FCRXCTRL_ALLH     (1 << 4)   /* EN All Headers */
+#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5)   /* EN 1st Seq. Header */
+#define IXGBE_FCRXCTRL_ICRC     (1 << 6)   /* Ignore Bad FC CRC */
+#define IXGBE_FCRXCTRL_FCCRCBO  (1 << 7)   /* FC CRC Byte Ordering */
+#define IXGBE_FCRXCTRL_FCOEVER  0x00000f00 /* FCoE Version: 4 bits */
+#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8
+/* FCoE Redirection */
+#define IXGBE_FCRECTL   0x0ED00 /* FC Redirection Control */
+#define IXGBE_FCRETA0   0x0ED10 /* FC Redirection Table 0 */
+#define IXGBE_FCRETA(_i)        (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
+#define IXGBE_FCRECTL_ENA       0x1        /* FCoE Redir Table Enable */
+#define IXGBE_FCRETA_SIZE       8          /* Max entries in FCRETA */
+#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */
+
 /* Stats registers */
 #define IXGBE_CRCERRS   0x04000
 #define IXGBE_ILLERRC   0x04004
@@ -533,6 +635,13 @@
 #define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
 #define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
 #define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_FCCRC     0x05118 /* Count of Good Eth CRC w/ Bad FC CRC */
+#define IXGBE_FCOERPDC  0x0241C /* FCoE Rx Packets Dropped Count */
+#define IXGBE_FCLAST    0x02424 /* FCoE Last Error Count */
+#define IXGBE_FCOEPRC   0x02428 /* Number of FCoE Packets Received */
+#define IXGBE_FCOEDWRC  0x0242C /* Number of FCoE DWords Received */
+#define IXGBE_FCOEPTC   0x08784 /* Number of FCoE Packets Transmitted */
+#define IXGBE_FCOEDWTC  0x08788 /* Number of FCoE DWords Transmitted */
 
 /* Management */
 #define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -833,13 +942,7 @@
 /* Omer bit masks */
 #define IXGBE_CORECTL_WRITE_CMD         0x00010000
 
-/* Device Type definitions for new protocol MDIO commands */
-#define IXGBE_MDIO_PMA_PMD_DEV_TYPE               0x1
-#define IXGBE_MDIO_PCS_DEV_TYPE                   0x3
-#define IXGBE_MDIO_PHY_XS_DEV_TYPE                0x4
-#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE              0x7
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE     0x1E   /* Device 30 */
-#define IXGBE_TWINAX_DEV                          1
+/* MDIO definitions */
 
 #define IXGBE_MDIO_COMMAND_TIMEOUT     100 /* PHY Timeout for 1 GB mode */
 
@@ -850,31 +953,10 @@
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED    0x0018
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED     0x0010
 
-#define IXGBE_MDIO_AUTO_NEG_CONTROL    0x0 /* AUTO_NEG Control Reg */
-#define IXGBE_MDIO_AUTO_NEG_STATUS     0x1 /* AUTO_NEG Status Reg */
-#define IXGBE_MDIO_PHY_XS_CONTROL      0x0 /* PHY_XS Control Reg */
-#define IXGBE_MDIO_PHY_XS_RESET        0x8000 /* PHY_XS Reset */
-#define IXGBE_MDIO_PHY_ID_HIGH         0x2 /* PHY ID High Reg*/
-#define IXGBE_MDIO_PHY_ID_LOW          0x3 /* PHY ID Low Reg*/
-#define IXGBE_MDIO_PHY_SPEED_ABILITY   0x4 /* Speed Ability Reg */
-#define IXGBE_MDIO_PHY_SPEED_10G       0x0001 /* 10G capable */
-#define IXGBE_MDIO_PHY_SPEED_1G        0x0010 /* 1G capable */
-#define IXGBE_MDIO_PHY_EXT_ABILITY        0xB /* Ext Ability Reg */
-#define IXGBE_MDIO_PHY_10GBASET_ABILITY   0x0004 /* 10GBaseT capable */
-#define IXGBE_MDIO_PHY_1000BASET_ABILITY  0x0020 /* 1000BaseT capable */
-
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR     0xC30A /* PHY_XS SDA/SCL Addr Reg */
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA     0xC30B /* PHY_XS SDA/SCL Data Reg */
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT     0xC30C /* PHY_XS SDA/SCL Status Reg */
 
-/* MII clause 22/28 definitions */
-#define IXGBE_MDIO_PHY_LOW_POWER_MODE  0x0800
-
-#define IXGBE_MII_SPEED_SELECTION_REG  0x10
-#define IXGBE_MII_RESTART              0x200
-#define IXGBE_MII_AUTONEG_COMPLETE     0x20
-#define IXGBE_MII_AUTONEG_REG          0x0
-
 #define IXGBE_PHY_REVISION_MASK        0xFFFFFFF0
 #define IXGBE_MAX_PHY_ADDR             32
 
@@ -898,8 +980,6 @@
 #define IXGBE_CONTROL_NL         0x000F
 #define IXGBE_CONTROL_EOL_NL     0x0FFF
 #define IXGBE_CONTROL_SOL_NL     0x0000
-#define IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET 0x002C
-#define IXGBE_PHY_ALLOW_ANY_SFP            0x1
 
 /* General purpose Interrupt Enable */
 #define IXGBE_SDP0_GPIEN         0x00000001 /* SDP0 */
@@ -958,6 +1038,8 @@
 #define IXGBE_VT_CTL_DIS_DEFPL  0x20000000 /* disable default pool */
 #define IXGBE_VT_CTL_REPLEN     0x40000000 /* replication enabled */
 #define IXGBE_VT_CTL_VT_ENABLE  0x00000001  /* Enable VT Mode */
+#define IXGBE_VT_CTL_POOL_SHIFT 7
+#define IXGBE_VT_CTL_POOL_MASK  (0x3F << IXGBE_VT_CTL_POOL_SHIFT)
 
 /* VMOLR bitmasks */
 #define IXGBE_VMOLR_AUPE        0x01000000 /* accept untagged packets */
@@ -1148,6 +1230,7 @@
 
 /* Interrupt Vector Allocation Registers */
 #define IXGBE_IVAR_REG_NUM      25
+#define IXGBE_IVAR_REG_NUM_82599       64
 #define IXGBE_IVAR_TXRX_ENTRY   96
 #define IXGBE_IVAR_RX_ENTRY     64
 #define IXGBE_IVAR_RX_QUEUE(_i)    (0 + (_i))
@@ -1163,6 +1246,7 @@
 
 /* ETYPE Queue Filter/Select Bit Masks */
 #define IXGBE_MAX_ETQF_FILTERS  8
+#define IXGBE_ETQF_FCOE         0x08000000 /* bit 27 */
 #define IXGBE_ETQF_BCN          0x10000000 /* bit 28 */
 #define IXGBE_ETQF_1588         0x40000000 /* bit 30 */
 #define IXGBE_ETQF_FILTER_EN    0x80000000 /* bit 31 */
@@ -1185,6 +1269,7 @@
  */
 #define IXGBE_ETQF_FILTER_EAPOL          0
 #define IXGBE_ETQF_FILTER_BCN            1
+#define IXGBE_ETQF_FILTER_FCOE           2
 #define IXGBE_ETQF_FILTER_1588           3
 /* VLAN Control Bit Masks */
 #define IXGBE_VLNCTRL_VET       0x0000FFFF  /* bits 0-15 */
@@ -1208,8 +1293,10 @@
 #define IXGBE_STATUS_LAN_ID_1   0x00000004 /* LAN ID 1 */
 
 /* ESDP Bit Masks */
-#define IXGBE_ESDP_SDP0 0x00000001
-#define IXGBE_ESDP_SDP1 0x00000002
+#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */
+#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */
+#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */
+#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */
 #define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
 #define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
 #define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
@@ -1309,8 +1396,6 @@
 #define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
 #define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
 
-#define FIBER_LINK_UP_LIMIT     50
-
 /* PCS1GLSTA Bit Masks */
 #define IXGBE_PCS1GLSTA_LINK_OK         1
 #define IXGBE_PCS1GLSTA_SYNK_OK         0x10
@@ -1382,6 +1467,8 @@
 #define IXGBE_FW_PTR            0x0F
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
+#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_SAN_MAC_ADDR_PTR  0x28
 #define IXGBE_PCIE_MSIX_82599_CAPS  0x72
 #define IXGBE_PCIE_MSIX_82598_CAPS  0x62
 
@@ -1425,6 +1512,13 @@
 #define IXGBE_EERD_ATTEMPTS 100000
 #endif
 
+#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET  0x0
+#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET  0x3
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP  0x1
+#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS  0x2
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
+#define IXGBE_FW_PATCH_VERSION_4   0x7
+
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
 #define IXGBE_PCI_LINK_WIDTH      0x3F0
@@ -1553,7 +1647,8 @@
 #define IXGBE_MTQC_RT_ENA       0x1 /* DCB Enable */
 #define IXGBE_MTQC_VT_ENA       0x2 /* VMDQ2 Enable */
 #define IXGBE_MTQC_64Q_1PB      0x0 /* 64 queues 1 pack buffer */
-#define IXGBE_MTQC_64VF         0x8 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_32VF         0x8 /* 4 TX Queues per pool w/32VF's */
+#define IXGBE_MTQC_64VF         0x4 /* 2 TX Queues per pool w/64VF's */
 #define IXGBE_MTQC_8TC_8TQ      0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
 
 /* Receive Descriptor bit definitions */
@@ -1585,6 +1680,11 @@
 #define IXGBE_RXD_ERR_IPE       0x80    /* IP Checksum Error */
 #define IXGBE_RXDADV_ERR_MASK           0xfff00000 /* RDESC.ERRORS mask */
 #define IXGBE_RXDADV_ERR_SHIFT          20         /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_FCEOFE         0x80000000 /* FCoEFe/IPE */
+#define IXGBE_RXDADV_ERR_FCERR          0x00700000 /* FCERR/FDIRERR */
+#define IXGBE_RXDADV_ERR_FDIR_LEN       0x00100000 /* FDIR Length error */
+#define IXGBE_RXDADV_ERR_FDIR_DROP      0x00200000 /* FDIR Drop error */
+#define IXGBE_RXDADV_ERR_FDIR_COLL      0x00400000 /* FDIR Collision error */
 #define IXGBE_RXDADV_ERR_HBO    0x00800000 /*Header Buffer Overflow */
 #define IXGBE_RXDADV_ERR_CE     0x01000000 /* CRC Error */
 #define IXGBE_RXDADV_ERR_LE     0x02000000 /* Length Error */
@@ -1604,12 +1704,19 @@
 #define IXGBE_RXDADV_STAT_FLM           IXGBE_RXD_STAT_FLM /* FDir Match */
 #define IXGBE_RXDADV_STAT_VP            IXGBE_RXD_STAT_VP  /* IEEE VLAN Pkt */
 #define IXGBE_RXDADV_STAT_MASK          0x000fffff /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS        0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT        0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP  0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP    0x00000030 /* 11: Ctxt w/ DDP */
 
 /* PSRTYPE bit definitions */
 #define IXGBE_PSRTYPE_TCPHDR    0x00000010
 #define IXGBE_PSRTYPE_UDPHDR    0x00000020
 #define IXGBE_PSRTYPE_IPV4HDR   0x00000100
 #define IXGBE_PSRTYPE_IPV6HDR   0x00000200
+#define IXGBE_PSRTYPE_L2HDR     0x00001000
 
 /* SRRCTL bit definitions */
 #define IXGBE_SRRCTL_BSIZEPKT_SHIFT     10     /* so many KBs */
@@ -1710,6 +1817,82 @@
 
 #endif
 
+enum ixgbe_fdir_pballoc_type {
+	IXGBE_FDIR_PBALLOC_64K = 0,
+	IXGBE_FDIR_PBALLOC_128K,
+	IXGBE_FDIR_PBALLOC_256K,
+};
+#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT           16
+
+/* Flow Director register values */
+#define IXGBE_FDIRCTRL_PBALLOC_64K              0x00000001
+#define IXGBE_FDIRCTRL_PBALLOC_128K             0x00000002
+#define IXGBE_FDIRCTRL_PBALLOC_256K             0x00000003
+#define IXGBE_FDIRCTRL_INIT_DONE                0x00000008
+#define IXGBE_FDIRCTRL_PERFECT_MATCH            0x00000010
+#define IXGBE_FDIRCTRL_REPORT_STATUS            0x00000020
+#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS     0x00000080
+#define IXGBE_FDIRCTRL_DROP_Q_SHIFT             8
+#define IXGBE_FDIRCTRL_FLEX_SHIFT               16
+#define IXGBE_FDIRCTRL_SEARCHLIM                0x00800000
+#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT         24
+#define IXGBE_FDIRCTRL_FULL_THRESH_MASK         0xF0000000
+#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT        28
+
+#define IXGBE_FDIRTCPM_DPORTM_SHIFT             16
+#define IXGBE_FDIRUDPM_DPORTM_SHIFT             16
+#define IXGBE_FDIRIP6M_DIPM_SHIFT               16
+#define IXGBE_FDIRM_VLANID                      0x00000001
+#define IXGBE_FDIRM_VLANP                       0x00000002
+#define IXGBE_FDIRM_POOL                        0x00000004
+#define IXGBE_FDIRM_L3P                         0x00000008
+#define IXGBE_FDIRM_L4P                         0x00000010
+#define IXGBE_FDIRM_FLEX                        0x00000020
+#define IXGBE_FDIRM_DIPv6                       0x00000040
+
+#define IXGBE_FDIRFREE_FREE_MASK                0xFFFF
+#define IXGBE_FDIRFREE_FREE_SHIFT               0
+#define IXGBE_FDIRFREE_COLL_MASK                0x7FFF0000
+#define IXGBE_FDIRFREE_COLL_SHIFT               16
+#define IXGBE_FDIRLEN_MAXLEN_MASK               0x3F
+#define IXGBE_FDIRLEN_MAXLEN_SHIFT              0
+#define IXGBE_FDIRLEN_MAXHASH_MASK              0x7FFF0000
+#define IXGBE_FDIRLEN_MAXHASH_SHIFT             16
+#define IXGBE_FDIRUSTAT_ADD_MASK                0xFFFF
+#define IXGBE_FDIRUSTAT_ADD_SHIFT               0
+#define IXGBE_FDIRUSTAT_REMOVE_MASK             0xFFFF0000
+#define IXGBE_FDIRUSTAT_REMOVE_SHIFT            16
+#define IXGBE_FDIRFSTAT_FADD_MASK               0x00FF
+#define IXGBE_FDIRFSTAT_FADD_SHIFT              0
+#define IXGBE_FDIRFSTAT_FREMOVE_MASK            0xFF00
+#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT           8
+#define IXGBE_FDIRPORT_DESTINATION_SHIFT        16
+#define IXGBE_FDIRVLAN_FLEX_SHIFT               16
+#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT       15
+#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT       16
+
+#define IXGBE_FDIRCMD_CMD_MASK                  0x00000003
+#define IXGBE_FDIRCMD_CMD_ADD_FLOW              0x00000001
+#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW           0x00000002
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT        0x00000003
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_HASH        0x00000007
+#define IXGBE_FDIRCMD_FILTER_UPDATE             0x00000008
+#define IXGBE_FDIRCMD_IPv6DMATCH                0x00000010
+#define IXGBE_FDIRCMD_L4TYPE_UDP                0x00000020
+#define IXGBE_FDIRCMD_L4TYPE_TCP                0x00000040
+#define IXGBE_FDIRCMD_L4TYPE_SCTP               0x00000060
+#define IXGBE_FDIRCMD_IPV6                      0x00000080
+#define IXGBE_FDIRCMD_CLEARHT                   0x00000100
+#define IXGBE_FDIRCMD_DROP                      0x00000200
+#define IXGBE_FDIRCMD_INT                       0x00000400
+#define IXGBE_FDIRCMD_LAST                      0x00000800
+#define IXGBE_FDIRCMD_COLLISION                 0x00001000
+#define IXGBE_FDIRCMD_QUEUE_EN                  0x00008000
+#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT            16
+#define IXGBE_FDIRCMD_VT_POOL_SHIFT             24
+#define IXGBE_FDIR_INIT_DONE_POLL               10
+#define IXGBE_FDIRCMD_CMD_POLL                  10
+
 /* Transmit Descriptor - Legacy */
 struct ixgbe_legacy_tx_desc {
 	u64 buffer_addr;       /* Address of the descriptor's data buffer */
@@ -1836,6 +2019,16 @@ struct ixgbe_adv_tx_context_desc {
 #define IXGBE_ADVTXD_POPTS_IPSEC      0x00000400 /* IPSec offload request */
 #define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
 #define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
+#define IXGBE_ADVTXT_TUCMD_FCOE      0x00008000       /* FCoE Frame Type */
+#define IXGBE_ADVTXD_FCOEF_EOF_MASK  (0x3 << 10)      /* FC EOF index */
+#define IXGBE_ADVTXD_FCOEF_SOF       ((1 << 2) << 10) /* FC SOF index */
+#define IXGBE_ADVTXD_FCOEF_PARINC    ((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define IXGBE_ADVTXD_FCOEF_ORIE      ((1 << 4) << 10) /* Orientation: End */
+#define IXGBE_ADVTXD_FCOEF_ORIS      ((1 << 5) << 10) /* Orientation: Start */
+#define IXGBE_ADVTXD_FCOEF_EOF_N     (0x0 << 10)      /* 00: EOFn */
+#define IXGBE_ADVTXD_FCOEF_EOF_T     (0x1 << 10)      /* 01: EOFt */
+#define IXGBE_ADVTXD_FCOEF_EOF_NI    (0x2 << 10)      /* 10: EOFni */
+#define IXGBE_ADVTXD_FCOEF_EOF_A     (0x3 << 10)      /* 11: EOFa */
 #define IXGBE_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
 #define IXGBE_ADVTXD_MSS_SHIFT       16  /* Adv ctxt MSS shift */
 
@@ -1861,7 +2054,7 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_UNKNOWN      0
 #define IXGBE_PHYSICAL_LAYER_10GBASE_T    0x0001
 #define IXGBE_PHYSICAL_LAYER_1000BASE_T   0x0002
-#define IXGBE_PHYSICAL_LAYER_100BASE_T    0x0004
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX   0x0004
 #define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU  0x0008
 #define IXGBE_PHYSICAL_LAYER_10GBASE_LR   0x0010
 #define IXGBE_PHYSICAL_LAYER_10GBASE_LRM  0x0020
@@ -1870,6 +2063,47 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_10GBASE_CX4  0x0100
 #define IXGBE_PHYSICAL_LAYER_1000BASE_KX  0x0200
 #define IXGBE_PHYSICAL_LAYER_1000BASE_BX  0x0400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR   0x0800
+#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
+
+/* Software ATR hash keys */
+#define IXGBE_ATR_BUCKET_HASH_KEY    0xE214AD3D
+#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x14364D17
+
+/* Software ATR input stream offsets and masks */
+#define IXGBE_ATR_VLAN_OFFSET       0
+#define IXGBE_ATR_SRC_IPV6_OFFSET   2
+#define IXGBE_ATR_SRC_IPV4_OFFSET  14
+#define IXGBE_ATR_DST_IPV6_OFFSET  18
+#define IXGBE_ATR_DST_IPV4_OFFSET  30
+#define IXGBE_ATR_SRC_PORT_OFFSET  34
+#define IXGBE_ATR_DST_PORT_OFFSET  36
+#define IXGBE_ATR_FLEX_BYTE_OFFSET 38
+#define IXGBE_ATR_VM_POOL_OFFSET   40
+#define IXGBE_ATR_L4TYPE_OFFSET    41
+
+#define IXGBE_ATR_L4TYPE_MASK      0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+#define IXGBE_ATR_L4TYPE_UDP       0x1
+#define IXGBE_ATR_L4TYPE_TCP       0x2
+#define IXGBE_ATR_L4TYPE_SCTP      0x3
+#define IXGBE_ATR_HASH_MASK     0x7fff
+
+/* Flow Director ATR input struct. */
+struct ixgbe_atr_input {
+	/* Byte layout in order, all values with MSB first:
+	 *
+	 * vlan_id    - 2 bytes
+	 * src_ip     - 16 bytes
+	 * dst_ip     - 16 bytes
+	 * src_port   - 2 bytes
+	 * dst_port   - 2 bytes
+	 * flex_bytes - 2 bytes
+	 * vm_pool    - 1 byte
+	 * l4type     - 1 byte
+	 */
+	u8 byte_stream[42];
+};
 
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
@@ -1897,6 +2131,7 @@ enum ixgbe_phy_type {
 	ixgbe_phy_sfp_ftl,
 	ixgbe_phy_sfp_unknown,
 	ixgbe_phy_sfp_intel,
+	ixgbe_phy_sfp_unsupported,
 	ixgbe_phy_generic
 };
 
@@ -2005,7 +2240,8 @@ struct ixgbe_fc_info {
 	u16 pause_time; /* Flow Control Pause timer */
 	bool send_xon; /* Flow control send XON */
 	bool strict_ieee; /* Strict IEEE mode */
-	bool disable_fc_autoneg; /* Turn off autoneg FC mode */
+	bool disable_fc_autoneg; /* Do not autonegotiate FC */
+	bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
 	enum ixgbe_fc_mode current_mode; /* FC mode in effect */
 	enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
 };
@@ -2075,6 +2311,12 @@ struct ixgbe_hw_stats {
 	u64 fdirfstat_fremove;
 	u64 fdirmatch;
 	u64 fdirmiss;
+	u64 fccrc;
+	u64 fcoerpdc;
+	u64 fcoeprc;
+	u64 fcoeptc;
+	u64 fcoedwrc;
+	u64 fcoedwtc;
 };
 
 /* forward declaration */
@@ -2101,6 +2343,8 @@ struct ixgbe_mac_operations {
 	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
 	u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
 	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
 	s32 (*stop_adapter)(struct ixgbe_hw *);
 	s32 (*get_bus_info)(struct ixgbe_hw *);
 	void (*set_lan_id)(struct ixgbe_hw *);
@@ -2129,8 +2373,7 @@ struct ixgbe_mac_operations {
 	s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
 	s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
 	s32 (*init_rx_addrs)(struct ixgbe_hw *);
-	s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32,
-	                           ixgbe_mc_addr_itr);
+	s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct list_head *);
 	s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
 	                           ixgbe_mc_addr_itr);
 	s32 (*enable_mc)(struct ixgbe_hw *);
@@ -2140,12 +2383,13 @@ struct ixgbe_mac_operations {
 	s32 (*init_uta_tables)(struct ixgbe_hw *);
 
 	/* Flow Control */
-	s32 (*setup_fc)(struct ixgbe_hw *, s32);
+	s32 (*fc_enable)(struct ixgbe_hw *, s32);
 };
 
 struct ixgbe_phy_operations {
 	s32 (*identify)(struct ixgbe_hw *);
 	s32 (*identify_sfp)(struct ixgbe_hw *);
+	s32 (*init)(struct ixgbe_hw *);
 	s32 (*reset)(struct ixgbe_hw *);
 	s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
 	s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
@@ -2173,6 +2417,7 @@ struct ixgbe_mac_info {
 	enum ixgbe_mac_type             type;
 	u8                              addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	u8                              perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	u8                              san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	s32                             mc_filter_type;
 	u32                             mcft_size;
 	u32                             vft_size;
@@ -2185,14 +2430,16 @@ struct ixgbe_mac_info {
 	bool                            orig_link_settings_stored;
 	bool                            autoneg;
 	bool                            autoneg_succeeded;
+	bool                            autotry_restart;
 };
 
 struct ixgbe_phy_info {
 	struct ixgbe_phy_operations     ops;
+	struct mdio_if_info		mdio;
 	enum ixgbe_phy_type             type;
-	u32                             addr;
 	u32                             id;
 	enum ixgbe_sfp_type             sfp_type;
+	bool                            sfp_setup_needed;
 	u32                             revision;
 	enum ixgbe_media_type           media_type;
 	bool                            reset_disable;
@@ -2249,6 +2496,8 @@ struct ixgbe_info {
 #define IXGBE_ERR_SFP_NOT_SUPPORTED             -19
 #define IXGBE_ERR_SFP_NOT_PRESENT               -20
 #define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT       -21
+#define IXGBE_ERR_FDIR_REINIT_FAILED            -23
+#define IXGBE_ERR_EEPROM_VERSION                -24
 #define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
 
 #endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index d3bf2f017cc..2a0174b62e9 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -270,6 +270,18 @@ static int ixpdev_close(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops ixpdev_netdev_ops = {
+	.ndo_open		= ixpdev_open,
+	.ndo_stop		= ixpdev_close,
+	.ndo_start_xmit		= ixpdev_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ixpdev_poll_controller,
+#endif
+};
+
 struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
 {
 	struct net_device *dev;
@@ -279,12 +291,7 @@ struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
 	if (dev == NULL)
 		return NULL;
 
-	dev->hard_start_xmit = ixpdev_xmit;
-	dev->open = ixpdev_open;
-	dev->stop = ixpdev_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ixpdev_poll_controller;
-#endif
+	dev->netdev_ops = &ixpdev_netdev_ops;
 
 	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
 
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 14248cfc3df..d12106b47bf 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -96,6 +96,18 @@ static int jazzsonic_close(struct net_device* dev)
 	return err;
 }
 
+static const struct net_device_ops sonic_netdev_ops = {
+	.ndo_open		= jazzsonic_open,
+	.ndo_stop		= jazzsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init sonic_probe1(struct net_device *dev)
 {
 	static unsigned version_printed;
@@ -179,12 +191,7 @@ static int __init sonic_probe1(struct net_device *dev)
 	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
 	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 
-	dev->open = jazzsonic_open;
-	dev->stop = jazzsonic_close;
-	dev->hard_start_xmit = sonic_send_packet;
-	dev->get_stats = sonic_get_stats;
-	dev->set_multicast_list = &sonic_multicast_list;
-	dev->tx_timeout = sonic_tx_timeout;
+	dev->netdev_ops = &sonic_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	/*
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 621a7c0c46b..1e3c63d67b9 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -1939,7 +1939,6 @@ jme_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 				TXCS_SELECT_QUEUE0 |
 				TXCS_QUEUE0S |
 				TXCS_ENABLE);
-	netdev->trans_start = jiffies;
 
 	tx_dbg(jme, "xmit: %d+%d@%lu\n", idx,
 			skb_shinfo(skb)->nr_frags + 2,
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 38d6649a29c..b4cf602c32b 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -133,6 +133,7 @@ struct korina_private {
 	int dma_halt_cnt;
 	int dma_run_cnt;
 	struct napi_struct napi;
+	struct timer_list media_check_timer;
 	struct mii_if_info mii_if;
 	struct net_device *dev;
 	int phy_addr;
@@ -664,6 +665,15 @@ static void korina_check_media(struct net_device *dev, unsigned int init_media)
 						&lp->eth_regs->ethmac2);
 }
 
+static void korina_poll_media(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+	struct korina_private *lp = netdev_priv(dev);
+
+	korina_check_media(dev, 0);
+	mod_timer(&lp->media_check_timer, jiffies + HZ);
+}
+
 static void korina_set_carrier(struct mii_if_info *mii)
 {
 	if (mii->force_media) {
@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device *dev)
 		    dev->name, lp->und_irq);
 		goto err_free_ovr_irq;
 	}
+	mod_timer(&lp->media_check_timer, jiffies + 1);
 out:
 	return ret;
 
@@ -1053,6 +1064,8 @@ static int korina_close(struct net_device *dev)
 	struct korina_private *lp = netdev_priv(dev);
 	u32 tmp;
 
+	del_timer(&lp->media_check_timer);
+
 	/* Disable interrupts */
 	disable_irq(lp->rx_irq);
 	disable_irq(lp->tx_irq);
@@ -1081,6 +1094,21 @@ static int korina_close(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops korina_netdev_ops = {
+	.ndo_open		= korina_open,
+	.ndo_stop		= korina_close,
+	.ndo_start_xmit		= korina_send_packet,
+	.ndo_set_multicast_list	= korina_multicast_list,
+	.ndo_tx_timeout		= korina_tx_timeout,
+	.ndo_do_ioctl		= korina_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= korina_poll_controller,
+#endif
+};
+
 static int korina_probe(struct platform_device *pdev)
 {
 	struct korina_device *bif = platform_get_drvdata(pdev);
@@ -1149,17 +1177,9 @@ static int korina_probe(struct platform_device *pdev)
 	dev->irq = lp->rx_irq;
 	lp->dev = dev;
 
-	dev->open = korina_open;
-	dev->stop = korina_close;
-	dev->hard_start_xmit = korina_send_packet;
-	dev->set_multicast_list = &korina_multicast_list;
+	dev->netdev_ops = &korina_netdev_ops;
 	dev->ethtool_ops = &netdev_ethtool_ops;
-	dev->tx_timeout = korina_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->do_ioctl = &korina_ioctl;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = korina_poll_controller;
-#endif
 	netif_napi_add(dev, &lp->napi, korina_poll, 64);
 
 	lp->phy_addr = (((lp->rx_irq == 0x2c? 1:0) << 8) | 0x05);
@@ -1176,6 +1196,7 @@ static int korina_probe(struct platform_device *pdev)
 			": cannot register net device %d\n", rc);
 		goto probe_err_register;
 	}
+	setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
 out:
 	return rc;
 
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
new file mode 100644
index 00000000000..39b0aea2aab
--- /dev/null
+++ b/drivers/net/ks8842.c
@@ -0,0 +1,732 @@
+/*
+ * ks8842_main.c timberdale KS8842 ethernet driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * The Micrel KS8842 behind the timberdale FPGA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+
+#define DRV_NAME "ks8842"
+
+/* Timberdale specific Registers */
+#define REG_TIMB_RST	0x1c
+
+/* KS8842 registers */
+
+#define REG_SELECT_BANK 0x0e
+
+/* bank 0 registers */
+#define REG_QRFCR	0x04
+
+/* bank 2 registers */
+#define REG_MARL	0x00
+#define REG_MARM	0x02
+#define REG_MARH	0x04
+
+/* bank 3 registers */
+#define REG_GRR		0x06
+
+/* bank 16 registers */
+#define REG_TXCR	0x00
+#define REG_TXSR	0x02
+#define REG_RXCR	0x04
+#define REG_TXMIR	0x08
+#define REG_RXMIR	0x0A
+
+/* bank 17 registers */
+#define REG_TXQCR	0x00
+#define REG_RXQCR	0x02
+#define REG_TXFDPR	0x04
+#define REG_RXFDPR	0x06
+#define REG_QMU_DATA_LO 0x08
+#define REG_QMU_DATA_HI 0x0A
+
+/* bank 18 registers */
+#define REG_IER		0x00
+#define IRQ_LINK_CHANGE	0x8000
+#define IRQ_TX		0x4000
+#define IRQ_RX		0x2000
+#define IRQ_RX_OVERRUN	0x0800
+#define IRQ_TX_STOPPED	0x0200
+#define IRQ_RX_STOPPED	0x0100
+#define IRQ_RX_ERROR	0x0080
+#define ENABLED_IRQS	(IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
+		IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
+#define REG_ISR		0x02
+#define REG_RXSR	0x04
+#define RXSR_VALID	0x8000
+#define RXSR_BROADCAST	0x80
+#define RXSR_MULTICAST	0x40
+#define RXSR_UNICAST	0x20
+#define RXSR_FRAMETYPE	0x08
+#define RXSR_TOO_LONG	0x04
+#define RXSR_RUNT	0x02
+#define RXSR_CRC_ERROR	0x01
+#define RXSR_ERROR	(RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR)
+
+/* bank 32 registers */
+#define REG_SW_ID_AND_ENABLE	0x00
+#define REG_SGCR1		0x02
+#define REG_SGCR2		0x04
+#define REG_SGCR3		0x06
+
+/* bank 39 registers */
+#define REG_MACAR1		0x00
+#define REG_MACAR2		0x02
+#define REG_MACAR3		0x04
+
+/* bank 45 registers */
+#define REG_P1MBCR		0x00
+#define REG_P1MBSR		0x02
+
+/* bank 46 registers */
+#define REG_P2MBCR		0x00
+#define REG_P2MBSR		0x02
+
+/* bank 48 registers */
+#define REG_P1CR2		0x02
+
+/* bank 49 registers */
+#define REG_P1CR4		0x02
+#define REG_P1SR		0x04
+
+struct ks8842_adapter {
+	void __iomem	*hw_addr;
+	int		irq;
+	struct tasklet_struct	tasklet;
+	spinlock_t	lock; /* spinlock to be interrupt safe */
+	struct platform_device *pdev;
+};
+
+static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank)
+{
+	iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK);
+}
+
+static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank,
+	u8 value, int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	iowrite8(value, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank,
+	u16 value, int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	iowrite16(value, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank,
+	u16 bits, int offset)
+{
+	u16 reg;
+	ks8842_select_bank(adapter, bank);
+	reg = ioread16(adapter->hw_addr + offset);
+	reg |= bits;
+	iowrite16(reg, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank,
+	u16 bits, int offset)
+{
+	u16 reg;
+	ks8842_select_bank(adapter, bank);
+	reg = ioread16(adapter->hw_addr + offset);
+	reg &= ~bits;
+	iowrite16(reg, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank,
+	u32 value, int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	iowrite32(value, adapter->hw_addr + offset);
+}
+
+static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank,
+	int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	return ioread8(adapter->hw_addr + offset);
+}
+
+static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank,
+	int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	return ioread16(adapter->hw_addr + offset);
+}
+
+static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
+	int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	return ioread32(adapter->hw_addr + offset);
+}
+
+static void ks8842_reset(struct ks8842_adapter *adapter)
+{
+	/* The KS8842 goes haywire when doing softare reset
+	 * a work around in the timberdale IP is implemented to
+	 * do a hardware reset instead
+	ks8842_write16(adapter, 3, 1, REG_GRR);
+	msleep(10);
+	iowrite16(0, adapter->hw_addr + REG_GRR);
+	*/
+	iowrite16(32, adapter->hw_addr + REG_SELECT_BANK);
+	iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
+	msleep(20);
+}
+
+static void ks8842_update_link_status(struct net_device *netdev,
+	struct ks8842_adapter *adapter)
+{
+	/* check the status of the link */
+	if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) {
+		netif_carrier_on(netdev);
+		netif_wake_queue(netdev);
+	} else {
+		netif_stop_queue(netdev);
+		netif_carrier_off(netdev);
+	}
+}
+
+static void ks8842_enable_tx(struct ks8842_adapter *adapter)
+{
+	ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR);
+}
+
+static void ks8842_disable_tx(struct ks8842_adapter *adapter)
+{
+	ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR);
+}
+
+static void ks8842_enable_rx(struct ks8842_adapter *adapter)
+{
+	ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR);
+}
+
+static void ks8842_disable_rx(struct ks8842_adapter *adapter)
+{
+	ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR);
+}
+
+static void ks8842_reset_hw(struct ks8842_adapter *adapter)
+{
+	/* reset the HW */
+	ks8842_reset(adapter);
+
+	/* Enable QMU Transmit flow control / transmit padding / Transmit CRC */
+	ks8842_write16(adapter, 16, 0x000E, REG_TXCR);
+
+	/* enable the receiver, uni + multi + broadcast + flow ctrl
+		+ crc strip */
+	ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400,
+		REG_RXCR);
+
+	/* TX frame pointer autoincrement */
+	ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR);
+
+	/* RX frame pointer autoincrement */
+	ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR);
+
+	/* RX 2 kb high watermark */
+	ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);
+
+	/* aggresive back off in half duplex */
+	ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
+
+	/* enable no excessive collison drop */
+	ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2);
+
+	/* Enable port 1 force flow control / back pressure / transmit / recv */
+	ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2);
+
+	/* restart port auto-negotiation */
+	ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
+	/* only advertise 10Mbps */
+	ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4);
+
+	/* Enable the transmitter */
+	ks8842_enable_tx(adapter);
+
+	/* Enable the receiver */
+	ks8842_enable_rx(adapter);
+
+	/* clear all interrupts */
+	ks8842_write16(adapter, 18, 0xffff, REG_ISR);
+
+	/* enable interrupts */
+	ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
+
+	/* enable the switch */
+	ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE);
+}
+
+static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
+{
+	int i;
+	u16 mac;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);
+
+	/* make sure the switch port uses the same MAC as the QMU */
+	mac = ks8842_read16(adapter, 2, REG_MARL);
+	ks8842_write16(adapter, 39, mac, REG_MACAR1);
+	mac = ks8842_read16(adapter, 2, REG_MARM);
+	ks8842_write16(adapter, 39, mac, REG_MACAR2);
+	mac = ks8842_read16(adapter, 2, REG_MARH);
+	ks8842_write16(adapter, 39, mac, REG_MACAR3);
+}
+
+static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter)
+{
+	return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff;
+}
+
+static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	int len = skb->len;
+	u32 *ptr = (u32 *)skb->data;
+	u32 ctrl;
+
+	dev_dbg(&adapter->pdev->dev,
+		"%s: len %u head %p data %p tail %p end %p\n",
+		__func__, skb->len, skb->head, skb->data,
+		skb_tail_pointer(skb), skb_end_pointer(skb));
+
+	/* check FIFO buffer space, we need space for CRC and command bits */
+	if (ks8842_tx_fifo_space(adapter) < len + 8)
+		return NETDEV_TX_BUSY;
+
+	/* the control word, enable IRQ, port 1 and the length */
+	ctrl = 0x8000 | 0x100 | (len << 16);
+	ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
+
+	netdev->stats.tx_bytes += len;
+
+	/* copy buffer */
+	while (len > 0) {
+		iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
+		len -= sizeof(u32);
+		ptr++;
+	}
+
+	/* enqueue packet */
+	ks8842_write16(adapter, 17, 1, REG_TXQCR);
+
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static void ks8842_rx_frame(struct net_device *netdev,
+	struct ks8842_adapter *adapter)
+{
+	u32 status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
+	int len = (status >> 16) & 0x7ff;
+
+	status &= 0xffff;
+
+	dev_dbg(&adapter->pdev->dev, "%s - rx_data: status: %x\n",
+		__func__, status);
+
+	/* check the status */
+	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
+		struct sk_buff *skb = netdev_alloc_skb(netdev, len + 2);
+
+		dev_dbg(&adapter->pdev->dev, "%s, got package, len: %d\n",
+			__func__, len);
+		if (skb) {
+			u32 *data;
+
+			netdev->stats.rx_packets++;
+			netdev->stats.rx_bytes += len;
+			if (status & RXSR_MULTICAST)
+				netdev->stats.multicast++;
+
+			/* Align socket buffer in 4-byte boundary for
+				 better performance. */
+			skb_reserve(skb, 2);
+			data = (u32 *)skb_put(skb, len);
+
+			ks8842_select_bank(adapter, 17);
+			while (len > 0) {
+				*data++ = ioread32(adapter->hw_addr +
+					REG_QMU_DATA_LO);
+				len -= sizeof(u32);
+			}
+
+			skb->protocol = eth_type_trans(skb, netdev);
+			netif_rx(skb);
+		} else
+			netdev->stats.rx_dropped++;
+	} else {
+		dev_dbg(&adapter->pdev->dev, "RX error, status: %x\n", status);
+		netdev->stats.rx_errors++;
+		if (status & RXSR_TOO_LONG)
+			netdev->stats.rx_length_errors++;
+		if (status & RXSR_CRC_ERROR)
+			netdev->stats.rx_crc_errors++;
+		if (status & RXSR_RUNT)
+			netdev->stats.rx_frame_errors++;
+	}
+
+	/* set high watermark to 3K */
+	ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR);
+
+	/* release the frame */
+	ks8842_write16(adapter, 17, 0x01, REG_RXQCR);
+
+	/* set high watermark to 2K */
+	ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR);
+}
+
+void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter)
+{
+	u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
+	dev_dbg(&adapter->pdev->dev, "%s Entry - rx_data: %d\n",
+		__func__, rx_data);
+	while (rx_data) {
+		ks8842_rx_frame(netdev, adapter);
+		rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
+	}
+}
+
+void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter)
+{
+	u16 sr = ks8842_read16(adapter, 16, REG_TXSR);
+	dev_dbg(&adapter->pdev->dev, "%s - entry, sr: %x\n", __func__, sr);
+	netdev->stats.tx_packets++;
+	if (netif_queue_stopped(netdev))
+		netif_wake_queue(netdev);
+}
+
+void ks8842_handle_rx_overrun(struct net_device *netdev,
+	struct ks8842_adapter *adapter)
+{
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+	netdev->stats.rx_errors++;
+	netdev->stats.rx_fifo_errors++;
+}
+
+void ks8842_tasklet(unsigned long arg)
+{
+	struct net_device *netdev = (struct net_device *)arg;
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	u16 isr;
+	unsigned long flags;
+	u16 entry_bank;
+
+	/* read current bank to be able to set it back */
+	spin_lock_irqsave(&adapter->lock, flags);
+	entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
+	spin_unlock_irqrestore(&adapter->lock, flags);
+
+	isr = ks8842_read16(adapter, 18, REG_ISR);
+	dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr);
+
+	/* Ack */
+	ks8842_write16(adapter, 18, isr, REG_ISR);
+
+	if (!netif_running(netdev))
+		return;
+
+	if (isr & IRQ_LINK_CHANGE)
+		ks8842_update_link_status(netdev, adapter);
+
+	if (isr & (IRQ_RX | IRQ_RX_ERROR))
+		ks8842_handle_rx(netdev, adapter);
+
+	if (isr & IRQ_TX)
+		ks8842_handle_tx(netdev, adapter);
+
+	if (isr & IRQ_RX_OVERRUN)
+		ks8842_handle_rx_overrun(netdev, adapter);
+
+	if (isr & IRQ_TX_STOPPED) {
+		ks8842_disable_tx(adapter);
+		ks8842_enable_tx(adapter);
+	}
+
+	if (isr & IRQ_RX_STOPPED) {
+		ks8842_disable_rx(adapter);
+		ks8842_enable_rx(adapter);
+	}
+
+	/* re-enable interrupts, put back the bank selection register */
+	spin_lock_irqsave(&adapter->lock, flags);
+	ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
+	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
+	spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+static irqreturn_t ks8842_irq(int irq, void *devid)
+{
+	struct ks8842_adapter *adapter = devid;
+	u16 isr;
+	u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
+	irqreturn_t ret = IRQ_NONE;
+
+	isr = ks8842_read16(adapter, 18, REG_ISR);
+	dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr);
+
+	if (isr) {
+		/* disable IRQ */
+		ks8842_write16(adapter, 18, 0x00, REG_IER);
+
+		/* schedule tasklet */
+		tasklet_schedule(&adapter->tasklet);
+
+		ret = IRQ_HANDLED;
+	}
+
+	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
+
+	return ret;
+}
+
+
+/* Netdevice operations */
+
+static int ks8842_open(struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	int err;
+
+	dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__);
+
+	/* reset the HW */
+	ks8842_reset_hw(adapter);
+
+	ks8842_update_link_status(netdev, adapter);
+
+	err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME,
+		adapter);
+	if (err) {
+		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
+			adapter->irq, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ks8842_close(struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+
+	dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__);
+
+	/* free the irq */
+	free_irq(adapter->irq, adapter);
+
+	/* disable the switch */
+	ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE);
+
+	return 0;
+}
+
+static int ks8842_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	int ret;
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+
+	ret = ks8842_tx_frame(skb, netdev);
+
+	if (ks8842_tx_fifo_space(adapter) <  netdev->mtu + 8)
+		netif_stop_queue(netdev);
+
+	return ret;
+}
+
+static int ks8842_set_mac(struct net_device *netdev, void *p)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	unsigned long flags;
+	struct sockaddr *addr = p;
+	char *mac = (u8 *)addr->sa_data;
+	int i;
+
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, mac, netdev->addr_len);
+
+	spin_lock_irqsave(&adapter->lock, flags);
+	for (i = 0; i < ETH_ALEN; i++) {
+		ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
+		ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
+			REG_MACAR1 + i);
+	}
+	spin_unlock_irqrestore(&adapter->lock, flags);
+	return 0;
+}
+
+static void ks8842_tx_timeout(struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	unsigned long flags;
+
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+
+	spin_lock_irqsave(&adapter->lock, flags);
+	/* disable interrupts */
+	ks8842_write16(adapter, 18, 0, REG_IER);
+	ks8842_write16(adapter, 18, 0xFFFF, REG_ISR);
+	spin_unlock_irqrestore(&adapter->lock, flags);
+
+	ks8842_reset_hw(adapter);
+
+	ks8842_update_link_status(netdev, adapter);
+}
+
+static const struct net_device_ops ks8842_netdev_ops = {
+	.ndo_open		= ks8842_open,
+	.ndo_stop		= ks8842_close,
+	.ndo_start_xmit		= ks8842_xmit_frame,
+	.ndo_set_mac_address	= ks8842_set_mac,
+	.ndo_tx_timeout 	= ks8842_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr
+};
+
+static struct ethtool_ops ks8842_ethtool_ops = {
+	.get_link		= ethtool_op_get_link,
+};
+
+static int __devinit ks8842_probe(struct platform_device *pdev)
+{
+	int err = -ENOMEM;
+	struct resource *iomem;
+	struct net_device *netdev;
+	struct ks8842_adapter *adapter;
+	u16 id;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
+		goto err_mem_region;
+
+	netdev = alloc_etherdev(sizeof(struct ks8842_adapter));
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	adapter = netdev_priv(netdev);
+	adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
+	if (!adapter->hw_addr)
+		goto err_ioremap;
+
+	adapter->irq = platform_get_irq(pdev, 0);
+	if (adapter->irq < 0) {
+		err = adapter->irq;
+		goto err_get_irq;
+	}
+
+	adapter->pdev = pdev;
+
+	tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev);
+	spin_lock_init(&adapter->lock);
+
+	netdev->netdev_ops = &ks8842_netdev_ops;
+	netdev->ethtool_ops = &ks8842_ethtool_ops;
+
+	ks8842_read_mac_addr(adapter, netdev->dev_addr);
+
+	id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE);
+
+	strcpy(netdev->name, "eth%d");
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	platform_set_drvdata(pdev, netdev);
+
+	printk(KERN_INFO DRV_NAME
+		" Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
+		(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
+
+	return 0;
+
+err_register:
+err_get_irq:
+	iounmap(adapter->hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_mem_region:
+	return err;
+}
+
+static int __devexit ks8842_remove(struct platform_device *pdev)
+{
+	struct net_device *netdev = platform_get_drvdata(pdev);
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	unregister_netdev(netdev);
+	tasklet_kill(&adapter->tasklet);
+	iounmap(adapter->hw_addr);
+	free_netdev(netdev);
+	release_mem_region(iomem->start, resource_size(iomem));
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+
+static struct platform_driver ks8842_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ks8842_probe,
+	.remove		= ks8842_remove,
+};
+
+static int __init ks8842_init(void)
+{
+	return platform_driver_register(&ks8842_platform_driver);
+}
+
+static void __exit ks8842_exit(void)
+{
+	platform_driver_unregister(&ks8842_platform_driver);
+}
+
+module_init(ks8842_init);
+module_exit(ks8842_exit);
+
+MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ks8842");
+
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index efbae4b8398..a0c578585a5 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -161,12 +161,12 @@ lan_init_chip(struct parisc_device *dev)
 
 	if (!dev->irq) {
 		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
-			__FILE__, dev->hpa.start);
+			__FILE__, (unsigned long)dev->hpa.start);
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
-			dev->irq);
+	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n",
+			(unsigned long)dev->hpa.start, dev->irq);
 
 	netdevice = alloc_etherdev(sizeof(struct i596_private));
 	if (!netdevice)
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 7415f517491..070fa450087 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1036,6 +1036,19 @@ static void print_eth(unsigned char *add, char *str)
 	printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
 	       add, add + 6, add, add[12], add[13], str);
 }
+static const struct net_device_ops i596_netdev_ops = {
+	.ndo_open		= i596_open,
+	.ndo_stop		= i596_close,
+	.ndo_start_xmit		= i596_start_xmit,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_tx_timeout		= i596_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= i596_poll_controller,
+#endif
+};
 
 static int __devinit i82596_probe(struct net_device *dev)
 {
@@ -1062,16 +1075,8 @@ static int __devinit i82596_probe(struct net_device *dev)
 		return -ENOMEM;
 	}
 
-	/* The 82596-specific entries in the device structure. */
-	dev->open = i596_open;
-	dev->stop = i596_close;
-	dev->hard_start_xmit = i596_start_xmit;
-	dev->set_multicast_list = set_multicast_list;
-	dev->tx_timeout = i596_tx_timeout;
+	dev->netdev_ops = &i596_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = i596_poll_controller;
-#endif
 
 	memset(dma, 0, sizeof(struct i596_dma));
 	lp->dma = dma;
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index 789b6cb744b..f28c2334300 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -370,7 +370,7 @@ static int __ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock(&ei_local->page_lock);
 		enable_irq_lockdep_irqrestore(dev->irq, &flags);
 		dev->stats.tx_errors++;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/*
diff --git a/drivers/net/ll_temac.h b/drivers/net/ll_temac.h
new file mode 100644
index 00000000000..1af66a1e691
--- /dev/null
+++ b/drivers/net/ll_temac.h
@@ -0,0 +1,374 @@
+
+#ifndef XILINX_LL_TEMAC_H
+#define XILINX_LL_TEMAC_H
+
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+/* packet size info */
+#define XTE_HDR_SIZE			14      /* size of Ethernet header */
+#define XTE_TRL_SIZE			4       /* size of Ethernet trailer (FCS) */
+#define XTE_JUMBO_MTU			9000
+#define XTE_MAX_JUMBO_FRAME_SIZE	(XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
+
+/*  Configuration options */
+
+/*  Accept all incoming packets.
+ *  This option defaults to disabled (cleared) */
+#define XTE_OPTION_PROMISC                      (1 << 0)
+/*  Jumbo frame support for Tx & Rx.
+ *  This option defaults to disabled (cleared) */
+#define XTE_OPTION_JUMBO                        (1 << 1)
+/*  VLAN Rx & Tx frame support.
+ *  This option defaults to disabled (cleared) */
+#define XTE_OPTION_VLAN                         (1 << 2)
+/*  Enable recognition of flow control frames on Rx
+ *  This option defaults to enabled (set) */
+#define XTE_OPTION_FLOW_CONTROL                 (1 << 4)
+/*  Strip FCS and PAD from incoming frames.
+ *  Note: PAD from VLAN frames is not stripped.
+ *  This option defaults to disabled (set) */
+#define XTE_OPTION_FCS_STRIP                    (1 << 5)
+/*  Generate FCS field and add PAD automatically for outgoing frames.
+ *  This option defaults to enabled (set) */
+#define XTE_OPTION_FCS_INSERT                   (1 << 6)
+/*  Enable Length/Type error checking for incoming frames. When this option is
+set, the MAC will filter frames that have a mismatched type/length field
+and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+types of frames are encountered. When this option is cleared, the MAC will
+allow these types of frames to be received.
+This option defaults to enabled (set) */
+#define XTE_OPTION_LENTYPE_ERR                  (1 << 7)
+/*  Enable the transmitter.
+ *  This option defaults to enabled (set) */
+#define XTE_OPTION_TXEN                         (1 << 11)
+/*  Enable the receiver
+*   This option defaults to enabled (set) */
+#define XTE_OPTION_RXEN                         (1 << 12)
+
+/*  Default options set when device is initialized or reset */
+#define XTE_OPTION_DEFAULTS                     \
+	(XTE_OPTION_TXEN |                          \
+	 XTE_OPTION_FLOW_CONTROL |                  \
+	 XTE_OPTION_RXEN)
+
+/* XPS_LL_TEMAC SDMA registers definition */
+
+#define TX_NXTDESC_PTR      0x00            /* r */
+#define TX_CURBUF_ADDR      0x01            /* r */
+#define TX_CURBUF_LENGTH    0x02            /* r */
+#define TX_CURDESC_PTR      0x03            /* rw */
+#define TX_TAILDESC_PTR     0x04            /* rw */
+#define TX_CHNL_CTRL        0x05            /* rw */
+/*
+ 0:7      24:31       IRQTimeout
+ 8:15     16:23       IRQCount
+ 16:20    11:15       Reserved
+ 21       10          0
+ 22       9           UseIntOnEnd
+ 23       8           LdIRQCnt
+ 24       7           IRQEn
+ 25:28    3:6         Reserved
+ 29       2           IrqErrEn
+ 30       1           IrqDlyEn
+ 31       0           IrqCoalEn
+*/
+#define CHNL_CTRL_IRQ_IOE       (1 << 9)
+#define CHNL_CTRL_IRQ_EN        (1 << 7)
+#define CHNL_CTRL_IRQ_ERR_EN    (1 << 2)
+#define CHNL_CTRL_IRQ_DLY_EN    (1 << 1)
+#define CHNL_CTRL_IRQ_COAL_EN   (1 << 0)
+#define TX_IRQ_REG          0x06            /* rw */
+/*
+  0:7      24:31       DltTmrValue
+ 8:15     16:23       ClscCntrValue
+ 16:17    14:15       Reserved
+ 18:21    10:13       ClscCnt
+ 22:23    8:9         DlyCnt
+ 24:28    3::7        Reserved
+ 29       2           ErrIrq
+ 30       1           DlyIrq
+ 31       0           CoalIrq
+ */
+#define TX_CHNL_STS         0x07            /* r */
+/*
+   0:9      22:31   Reserved
+ 10       21      TailPErr
+ 11       20      CmpErr
+ 12       19      AddrErr
+ 13       18      NxtPErr
+ 14       17      CurPErr
+ 15       16      BsyWr
+ 16:23    8:15    Reserved
+ 24       7       Error
+ 25       6       IOE
+ 26       5       SOE
+ 27       4       Cmplt
+ 28       3       SOP
+ 29       2       EOP
+ 30       1       EngBusy
+ 31       0       Reserved
+*/
+
+#define RX_NXTDESC_PTR      0x08            /* r */
+#define RX_CURBUF_ADDR      0x09            /* r */
+#define RX_CURBUF_LENGTH    0x0a            /* r */
+#define RX_CURDESC_PTR      0x0b            /* rw */
+#define RX_TAILDESC_PTR     0x0c            /* rw */
+#define RX_CHNL_CTRL        0x0d            /* rw */
+/*
+ 0:7      24:31       IRQTimeout
+ 8:15     16:23       IRQCount
+ 16:20    11:15       Reserved
+ 21       10          0
+ 22       9           UseIntOnEnd
+ 23       8           LdIRQCnt
+ 24       7           IRQEn
+ 25:28    3:6         Reserved
+ 29       2           IrqErrEn
+ 30       1           IrqDlyEn
+ 31       0           IrqCoalEn
+ */
+#define RX_IRQ_REG          0x0e            /* rw */
+#define IRQ_COAL        (1 << 0)
+#define IRQ_DLY         (1 << 1)
+#define IRQ_ERR         (1 << 2)
+#define IRQ_DMAERR      (1 << 7)            /* this is not documented ??? */
+/*
+ 0:7      24:31       DltTmrValue
+ 8:15     16:23       ClscCntrValue
+ 16:17    14:15       Reserved
+ 18:21    10:13       ClscCnt
+ 22:23    8:9         DlyCnt
+ 24:28    3::7        Reserved
+*/
+#define RX_CHNL_STS         0x0f        /* r */
+#define CHNL_STS_ENGBUSY    (1 << 1)
+#define CHNL_STS_EOP        (1 << 2)
+#define CHNL_STS_SOP        (1 << 3)
+#define CHNL_STS_CMPLT      (1 << 4)
+#define CHNL_STS_SOE        (1 << 5)
+#define CHNL_STS_IOE        (1 << 6)
+#define CHNL_STS_ERR        (1 << 7)
+
+#define CHNL_STS_BSYWR      (1 << 16)
+#define CHNL_STS_CURPERR    (1 << 17)
+#define CHNL_STS_NXTPERR    (1 << 18)
+#define CHNL_STS_ADDRERR    (1 << 19)
+#define CHNL_STS_CMPERR     (1 << 20)
+#define CHNL_STS_TAILERR    (1 << 21)
+/*
+ 0:9      22:31   Reserved
+ 10       21      TailPErr
+ 11       20      CmpErr
+ 12       19      AddrErr
+ 13       18      NxtPErr
+ 14       17      CurPErr
+ 15       16      BsyWr
+ 16:23    8:15    Reserved
+ 24       7       Error
+ 25       6       IOE
+ 26       5       SOE
+ 27       4       Cmplt
+ 28       3       SOP
+ 29       2       EOP
+ 30       1       EngBusy
+ 31       0       Reserved
+*/
+
+#define DMA_CONTROL_REG             0x10            /* rw */
+#define DMA_CONTROL_RST                 (1 << 0)
+#define DMA_TAIL_ENABLE                 (1 << 2)
+
+/* XPS_LL_TEMAC direct registers definition */
+
+#define XTE_RAF0_OFFSET              0x00
+#define RAF0_RST                        (1 << 0)
+#define RAF0_MCSTREJ                    (1 << 1)
+#define RAF0_BCSTREJ                    (1 << 2)
+#define XTE_TPF0_OFFSET              0x04
+#define XTE_IFGP0_OFFSET             0x08
+#define XTE_ISR0_OFFSET              0x0c
+#define ISR0_HARDACSCMPLT               (1 << 0)
+#define ISR0_AUTONEG                    (1 << 1)
+#define ISR0_RXCMPLT                    (1 << 2)
+#define ISR0_RXREJ                      (1 << 3)
+#define ISR0_RXFIFOOVR                  (1 << 4)
+#define ISR0_TXCMPLT                    (1 << 5)
+#define ISR0_RXDCMLCK                   (1 << 6)
+
+#define XTE_IPR0_OFFSET              0x10
+#define XTE_IER0_OFFSET              0x14
+
+#define XTE_MSW0_OFFSET              0x20
+#define XTE_LSW0_OFFSET              0x24
+#define XTE_CTL0_OFFSET              0x28
+#define XTE_RDY0_OFFSET              0x2c
+
+#define XTE_RSE_MIIM_RR_MASK      0x0002
+#define XTE_RSE_MIIM_WR_MASK      0x0004
+#define XTE_RSE_CFG_RR_MASK       0x0020
+#define XTE_RSE_CFG_WR_MASK       0x0040
+#define XTE_RDY0_HARD_ACS_RDY_MASK  (0x10000)
+
+/* XPS_LL_TEMAC indirect registers offset definition */
+
+#define	XTE_RXC0_OFFSET			0x00000200 /* Rx configuration word 0 */
+#define	XTE_RXC1_OFFSET			0x00000240 /* Rx configuration word 1 */
+#define XTE_RXC1_RXRST_MASK		(1 << 31)  /* Receiver reset */
+#define XTE_RXC1_RXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
+#define XTE_RXC1_RXFCS_MASK		(1 << 29)  /* FCS not stripped */
+#define XTE_RXC1_RXEN_MASK		(1 << 28)  /* Receiver enable */
+#define XTE_RXC1_RXVLAN_MASK		(1 << 27)  /* VLAN enable */
+#define XTE_RXC1_RXHD_MASK		(1 << 26)  /* Half duplex */
+#define XTE_RXC1_RXLT_MASK		(1 << 25)  /* Length/type check disable */
+
+#define XTE_TXC_OFFSET			0x00000280 /*  Tx configuration */
+#define XTE_TXC_TXRST_MASK		(1 << 31)  /* Transmitter reset */
+#define XTE_TXC_TXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
+#define XTE_TXC_TXFCS_MASK		(1 << 29)  /* Generate FCS */
+#define XTE_TXC_TXEN_MASK		(1 << 28)  /* Transmitter enable */
+#define XTE_TXC_TXVLAN_MASK		(1 << 27)  /* VLAN enable */
+#define XTE_TXC_TXHD_MASK		(1 << 26)  /* Half duplex */
+
+#define XTE_FCC_OFFSET			0x000002C0 /* Flow control config */
+#define XTE_FCC_RXFLO_MASK		(1 << 29)  /* Rx flow control enable */
+#define XTE_FCC_TXFLO_MASK		(1 << 30)  /* Tx flow control enable */
+
+#define XTE_EMCFG_OFFSET		0x00000300 /* EMAC configuration */
+#define XTE_EMCFG_LINKSPD_MASK		0xC0000000 /* Link speed */
+#define XTE_EMCFG_HOSTEN_MASK		(1 << 26)  /* Host interface enable */
+#define XTE_EMCFG_LINKSPD_10		0x00000000 /* 10 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_100		(1 << 30)  /* 100 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_1000		(1 << 31)  /* 1000 Mbit LINKSPD_MASK */
+
+#define XTE_GMIC_OFFSET			0x00000320 /* RGMII/SGMII config */
+#define XTE_MC_OFFSET			0x00000340 /* MDIO configuration */
+#define XTE_UAW0_OFFSET			0x00000380 /* Unicast address word 0 */
+#define XTE_UAW1_OFFSET			0x00000384 /* Unicast address word 1 */
+
+#define XTE_MAW0_OFFSET			0x00000388 /* Multicast addr word 0 */
+#define XTE_MAW1_OFFSET			0x0000038C /* Multicast addr word 1 */
+#define XTE_AFM_OFFSET			0x00000390 /* Promiscuous mode */
+#define XTE_AFM_EPPRM_MASK		(1 << 31)  /* Promiscuous mode enable */
+
+/* Interrupt Request status */
+#define XTE_TIS_OFFSET			0x000003A0
+#define TIS_FRIS			(1 << 0)
+#define TIS_MRIS			(1 << 1)
+#define TIS_MWIS			(1 << 2)
+#define TIS_ARIS			(1 << 3)
+#define TIS_AWIS			(1 << 4)
+#define TIS_CRIS			(1 << 5)
+#define TIS_CWIS			(1 << 6)
+
+#define XTE_TIE_OFFSET			0x000003A4 /* Interrupt enable */
+
+/**  MII Mamagement Control register (MGTCR) */
+#define XTE_MGTDR_OFFSET		0x000003B0 /* MII data */
+#define XTE_MIIMAI_OFFSET		0x000003B4 /* MII control */
+
+#define CNTLREG_WRITE_ENABLE_MASK   0x8000
+#define CNTLREG_EMAC1SEL_MASK       0x0400
+#define CNTLREG_ADDRESSCODE_MASK    0x03ff
+
+/* CDMAC descriptor status bit definitions */
+
+#define STS_CTRL_APP0_ERR         (1 << 31)
+#define STS_CTRL_APP0_IRQONEND    (1 << 30)
+/* undoccumented */
+#define STS_CTRL_APP0_STOPONEND   (1 << 29)
+#define STS_CTRL_APP0_CMPLT       (1 << 28)
+#define STS_CTRL_APP0_SOP         (1 << 27)
+#define STS_CTRL_APP0_EOP         (1 << 26)
+#define STS_CTRL_APP0_ENGBUSY     (1 << 25)
+/* undocumented */
+#define STS_CTRL_APP0_ENGRST      (1 << 24)
+
+#define TX_CONTROL_CALC_CSUM_MASK   1
+
+#define XTE_ALIGN       32
+#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
+
+#define MULTICAST_CAM_TABLE_NUM 4
+
+/* TX/RX CURDESC_PTR points to first descriptor */
+/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
+
+/**
+ * struct cdmac_bd - LocalLink buffer descriptor format
+ *
+ * app0 bits:
+ *	0    Error
+ *	1    IrqOnEnd    generate an interrupt at completion of DMA  op
+ *	2    reserved
+ *	3    completed   Current descriptor completed
+ *	4    SOP         TX - marks first desc/ RX marks first desct
+ *	5    EOP         TX marks last desc/RX marks last desc
+ *	6    EngBusy     DMA is processing
+ *	7    reserved
+ *	8:31 application specific
+ */
+struct cdmac_bd {
+	u32 next;	/* Physical address of next buffer descriptor */
+	u32 phys;
+	u32 len;
+	u32 app0;
+	u32 app1;	/* TX start << 16 | insert */
+	u32 app2;	/* TX csum */
+	u32 app3;
+	u32 app4;	/* skb for TX length for RX */
+};
+
+struct temac_local {
+	struct net_device *ndev;
+	struct device *dev;
+
+	/* Connection to PHY device */
+	struct phy_device *phy_dev;	/* Pointer to PHY device */
+	struct device_node *phy_node;
+
+	/* MDIO bus data */
+	struct mii_bus *mii_bus;	/* MII bus reference */
+	int mdio_irqs[PHY_MAX_ADDR];	/* IRQs table for MDIO bus */
+
+	/* IO registers and IRQs */
+	void __iomem *regs;
+	dcr_host_t sdma_dcrs;
+	int tx_irq;
+	int rx_irq;
+	int emac_num;
+
+	struct sk_buff **rx_skb;
+	spinlock_t rx_lock;
+	struct mutex indirect_mutex;
+	u32 options;			/* Current options word */
+	int last_link;
+
+	/* Buffer descriptors */
+	struct cdmac_bd *tx_bd_v;
+	dma_addr_t tx_bd_p;
+	struct cdmac_bd *rx_bd_v;
+	dma_addr_t rx_bd_p;
+	int tx_bd_ci;
+	int tx_bd_next;
+	int tx_bd_tail;
+	int rx_bd_ci;
+};
+
+/* xilinx_temac.c */
+u32 temac_ior(struct temac_local *lp, int offset);
+void temac_iow(struct temac_local *lp, int offset, u32 value);
+int temac_indirect_busywait(struct temac_local *lp);
+u32 temac_indirect_in32(struct temac_local *lp, int reg);
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
+
+
+/* xilinx_temac_mdio.c */
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
+void temac_mdio_teardown(struct temac_local *lp);
+
+#endif /* XILINX_LL_TEMAC_H */
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
new file mode 100644
index 00000000000..96e7248876c
--- /dev/null
+++ b/drivers/net/ll_temac_main.c
@@ -0,0 +1,969 @@
+/*
+ * Driver for Xilinx TEMAC Ethernet device
+ *
+ * Copyright (c) 2008 Nissin Systems Co., Ltd.,  Yoshio Kashiwagi
+ * Copyright (c) 2005-2008 DLA Systems,  David H. Lynch Jr. <dhlii@dlasys.net>
+ * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
+ *
+ * This is a driver for the Xilinx ll_temac ipcore which is often used
+ * in the Virtex and Spartan series of chips.
+ *
+ * Notes:
+ * - The ll_temac hardware uses indirect access for many of the TEMAC
+ *   registers, include the MDIO bus.  However, indirect access to MDIO
+ *   registers take considerably more clock cycles than to TEMAC registers.
+ *   MDIO accesses are long, so threads doing them should probably sleep
+ *   rather than busywait.  However, since only one indirect access can be
+ *   in progress at any given time, that means that *all* indirect accesses
+ *   could end up sleeping (to wait for an MDIO access to complete).
+ *   Fortunately none of the indirect accesses are on the 'hot' path for tx
+ *   or rx, so this should be okay.
+ *
+ * TODO:
+ * - Fix driver to work on more than just Virtex5.  Right now the driver
+ *   assumes that the locallink DMA registers are accessed via DCR
+ *   instructions.
+ * - Factor out locallink DMA code into separate driver
+ * - Fix multicast assignment.
+ * - Fix support for hardware checksumming.
+ * - Testing.  Lots and lots of testing.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/tcp.h>      /* needed for sizeof(tcphdr) */
+#include <linux/udp.h>      /* needed for sizeof(udphdr) */
+#include <linux/phy.h>
+#include <linux/in.h>
+#include <linux/io.h>
+#include <linux/ip.h>
+
+#include "ll_temac.h"
+
+#define TX_BD_NUM   64
+#define RX_BD_NUM   128
+
+/* ---------------------------------------------------------------------
+ * Low level register access functions
+ */
+
+u32 temac_ior(struct temac_local *lp, int offset)
+{
+	return in_be32((u32 *)(lp->regs + offset));
+}
+
+void temac_iow(struct temac_local *lp, int offset, u32 value)
+{
+	out_be32((u32 *) (lp->regs + offset), value);
+}
+
+int temac_indirect_busywait(struct temac_local *lp)
+{
+	long end = jiffies + 2;
+
+	while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
+		if (end - jiffies <= 0) {
+			WARN_ON(1);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+	return 0;
+}
+
+/**
+ * temac_indirect_in32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+u32 temac_indirect_in32(struct temac_local *lp, int reg)
+{
+	u32 val;
+
+	if (temac_indirect_busywait(lp))
+		return -ETIMEDOUT;
+	temac_iow(lp, XTE_CTL0_OFFSET, reg);
+	if (temac_indirect_busywait(lp))
+		return -ETIMEDOUT;
+	val = temac_ior(lp, XTE_LSW0_OFFSET);
+
+	return val;
+}
+
+/**
+ * temac_indirect_out32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
+{
+	if (temac_indirect_busywait(lp))
+		return;
+	temac_iow(lp, XTE_LSW0_OFFSET, value);
+	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+}
+
+static u32 temac_dma_in32(struct temac_local *lp, int reg)
+{
+	return dcr_read(lp->sdma_dcrs, reg);
+}
+
+static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
+{
+	dcr_write(lp->sdma_dcrs, reg, value);
+}
+
+/**
+ * temac_dma_bd_init - Setup buffer descriptor rings
+ */
+static int temac_dma_bd_init(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct sk_buff *skb;
+	int i;
+
+	lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL);
+	/* allocate the tx and rx ring buffer descriptors. */
+	/* returns a virtual addres and a physical address. */
+	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+					 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+					 &lp->tx_bd_p, GFP_KERNEL);
+	lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+					 sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+					 &lp->rx_bd_p, GFP_KERNEL);
+
+	memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
+	for (i = 0; i < TX_BD_NUM; i++) {
+		lp->tx_bd_v[i].next = lp->tx_bd_p +
+				sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM);
+	}
+
+	memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
+	for (i = 0; i < RX_BD_NUM; i++) {
+		lp->rx_bd_v[i].next = lp->rx_bd_p +
+				sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
+
+		skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE
+				+ XTE_ALIGN, GFP_ATOMIC);
+		if (skb == 0) {
+			dev_err(&ndev->dev, "alloc_skb error %d\n", i);
+			return -1;
+		}
+		lp->rx_skb[i] = skb;
+		skb_reserve(skb,  BUFFER_ALIGN(skb->data));
+		/* returns physical address of skb->data */
+		lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
+						     skb->data,
+						     XTE_MAX_JUMBO_FRAME_SIZE,
+						     DMA_FROM_DEVICE);
+		lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
+		lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
+	}
+
+	temac_dma_out32(lp, TX_CHNL_CTRL, 0x10220400 |
+					  CHNL_CTRL_IRQ_EN |
+					  CHNL_CTRL_IRQ_DLY_EN |
+					  CHNL_CTRL_IRQ_COAL_EN);
+	/* 0x10220483 */
+	/* 0x00100483 */
+	temac_dma_out32(lp, RX_CHNL_CTRL, 0xff010000 |
+					  CHNL_CTRL_IRQ_EN |
+					  CHNL_CTRL_IRQ_DLY_EN |
+					  CHNL_CTRL_IRQ_COAL_EN |
+					  CHNL_CTRL_IRQ_IOE);
+	/* 0xff010283 */
+
+	temac_dma_out32(lp, RX_CURDESC_PTR,  lp->rx_bd_p);
+	temac_dma_out32(lp, RX_TAILDESC_PTR,
+		       lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+	temac_dma_out32(lp, TX_CURDESC_PTR, lp->tx_bd_p);
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * net_device_ops
+ */
+
+static int temac_set_mac_address(struct net_device *ndev, void *address)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+
+	if (address)
+		memcpy(ndev->dev_addr, address, ETH_ALEN);
+
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		random_ether_addr(ndev->dev_addr);
+
+	/* set up unicast MAC address filter set its mac address */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_UAW0_OFFSET,
+			     (ndev->dev_addr[0]) |
+			     (ndev->dev_addr[1] << 8) |
+			     (ndev->dev_addr[2] << 16) |
+			     (ndev->dev_addr[3] << 24));
+	/* There are reserved bits in EUAW1
+	 * so don't affect them Set MAC bits [47:32] in EUAW1 */
+	temac_indirect_out32(lp, XTE_UAW1_OFFSET,
+			     (ndev->dev_addr[4] & 0x000000ff) |
+			     (ndev->dev_addr[5] << 8));
+	mutex_unlock(&lp->indirect_mutex);
+
+	return 0;
+}
+
+static void temac_set_multicast_list(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	u32 multi_addr_msw, multi_addr_lsw, val;
+	int i;
+
+	mutex_lock(&lp->indirect_mutex);
+	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)
+			|| ndev->mc_count > MULTICAST_CAM_TABLE_NUM) {
+		/*
+		 *	We must make the kernel realise we had to move
+		 *	into promisc mode or we start all out war on
+		 *	the cable. If it was a promisc request the
+		 *	flag is already set. If not we assert it.
+		 */
+		ndev->flags |= IFF_PROMISC;
+		temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
+		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
+	} else if (ndev->mc_count) {
+		struct dev_mc_list *mclist = ndev->mc_list;
+		for (i = 0; mclist && i < ndev->mc_count; i++) {
+
+			if (i >= MULTICAST_CAM_TABLE_NUM)
+				break;
+			multi_addr_msw = ((mclist->dmi_addr[3] << 24) |
+					  (mclist->dmi_addr[2] << 16) |
+					  (mclist->dmi_addr[1] << 8) |
+					  (mclist->dmi_addr[0]));
+			temac_indirect_out32(lp, XTE_MAW0_OFFSET,
+					     multi_addr_msw);
+			multi_addr_lsw = ((mclist->dmi_addr[5] << 8) |
+					  (mclist->dmi_addr[4]) | (i << 16));
+			temac_indirect_out32(lp, XTE_MAW1_OFFSET,
+					     multi_addr_lsw);
+			mclist = mclist->next;
+		}
+	} else {
+		val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
+		temac_indirect_out32(lp, XTE_AFM_OFFSET,
+				     val & ~XTE_AFM_EPPRM_MASK);
+		temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
+		temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
+		dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
+	}
+	mutex_unlock(&lp->indirect_mutex);
+}
+
+struct temac_option {
+	int flg;
+	u32 opt;
+	u32 reg;
+	u32 m_or;
+	u32 m_and;
+} temac_options[] = {
+	/* Turn on jumbo packet support for both Rx and Tx */
+	{
+		.opt = XTE_OPTION_JUMBO,
+		.reg = XTE_TXC_OFFSET,
+		.m_or = XTE_TXC_TXJMBO_MASK,
+	},
+	{
+		.opt = XTE_OPTION_JUMBO,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXJMBO_MASK,
+	},
+	/* Turn on VLAN packet support for both Rx and Tx */
+	{
+		.opt = XTE_OPTION_VLAN,
+		.reg = XTE_TXC_OFFSET,
+		.m_or =XTE_TXC_TXVLAN_MASK,
+	},
+	{
+		.opt = XTE_OPTION_VLAN,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXVLAN_MASK,
+	},
+	/* Turn on FCS stripping on receive packets */
+	{
+		.opt = XTE_OPTION_FCS_STRIP,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXFCS_MASK,
+	},
+	/* Turn on FCS insertion on transmit packets */
+	{
+		.opt = XTE_OPTION_FCS_INSERT,
+		.reg = XTE_TXC_OFFSET,
+		.m_or =XTE_TXC_TXFCS_MASK,
+	},
+	/* Turn on length/type field checking on receive packets */
+	{
+		.opt = XTE_OPTION_LENTYPE_ERR,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXLT_MASK,
+	},
+	/* Turn on flow control */
+	{
+		.opt = XTE_OPTION_FLOW_CONTROL,
+		.reg = XTE_FCC_OFFSET,
+		.m_or =XTE_FCC_RXFLO_MASK,
+	},
+	/* Turn on flow control */
+	{
+		.opt = XTE_OPTION_FLOW_CONTROL,
+		.reg = XTE_FCC_OFFSET,
+		.m_or =XTE_FCC_TXFLO_MASK,
+	},
+	/* Turn on promiscuous frame filtering (all frames are received ) */
+	{
+		.opt = XTE_OPTION_PROMISC,
+		.reg = XTE_AFM_OFFSET,
+		.m_or =XTE_AFM_EPPRM_MASK,
+	},
+	/* Enable transmitter if not already enabled */
+	{
+		.opt = XTE_OPTION_TXEN,
+		.reg = XTE_TXC_OFFSET,
+		.m_or =XTE_TXC_TXEN_MASK,
+	},
+	/* Enable receiver? */
+	{
+		.opt = XTE_OPTION_RXEN,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXEN_MASK,
+	},
+	{}
+};
+
+/**
+ * temac_setoptions
+ */
+static u32 temac_setoptions(struct net_device *ndev, u32 options)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct temac_option *tp = &temac_options[0];
+	int reg;
+
+	mutex_lock(&lp->indirect_mutex);
+	while (tp->opt) {
+		reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
+		if (options & tp->opt)
+			reg |= tp->m_or;
+		temac_indirect_out32(lp, tp->reg, reg);
+		tp++;
+	}
+	lp->options |= options;
+	mutex_unlock(&lp->indirect_mutex);
+
+	return (0);
+}
+
+/* Initilize temac */
+static void temac_device_reset(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	u32 timeout;
+	u32 val;
+
+	/* Perform a software reset */
+
+	/* 0x300 host enable bit ? */
+	/* reset PHY through control register ?:1 */
+
+	dev_dbg(&ndev->dev, "%s()\n", __func__);
+
+	mutex_lock(&lp->indirect_mutex);
+	/* Reset the receiver and wait for it to finish reset */
+	temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
+	timeout = 1000;
+	while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(&ndev->dev,
+				"temac_device_reset RX reset timeout!!\n");
+			break;
+		}
+	}
+
+	/* Reset the transmitter and wait for it to finish reset */
+	temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK);
+	timeout = 1000;
+	while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(&ndev->dev,
+				"temac_device_reset TX reset timeout!!\n");
+			break;
+		}
+	}
+
+	/* Disable the receiver */
+	val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
+	temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
+
+	/* Reset Local Link (DMA) */
+	temac_dma_out32(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+	timeout = 1000;
+	while (temac_dma_in32(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(&ndev->dev,
+				"temac_device_reset DMA reset timeout!!\n");
+			break;
+		}
+	}
+	temac_dma_out32(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
+
+	temac_dma_bd_init(ndev);
+
+	temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
+	temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
+	temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
+	temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
+
+	mutex_unlock(&lp->indirect_mutex);
+
+	/* Sync default options with HW
+	 * but leave receiver and transmitter disabled.  */
+	temac_setoptions(ndev,
+			 lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
+
+	temac_set_mac_address(ndev, NULL);
+
+	/* Set address filter table */
+	temac_set_multicast_list(ndev);
+	if (temac_setoptions(ndev, lp->options))
+		dev_err(&ndev->dev, "Error setting TEMAC options\n");
+
+	/* Init Driver variable */
+	ndev->trans_start = 0;
+}
+
+void temac_adjust_link(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct phy_device *phy = lp->phy_dev;
+	u32 mii_speed;
+	int link_state;
+
+	/* hash together the state values to decide if something has changed */
+	link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+	mutex_lock(&lp->indirect_mutex);
+	if (lp->last_link != link_state) {
+		mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
+		mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
+
+		switch (phy->speed) {
+		case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
+		case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
+		case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
+		}
+
+		/* Write new speed setting out to TEMAC */
+		temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
+		lp->last_link = link_state;
+		phy_print_status(phy);
+	}
+	mutex_unlock(&lp->indirect_mutex);
+}
+
+static void temac_start_xmit_done(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct cdmac_bd *cur_p;
+	unsigned int stat = 0;
+
+	cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+	stat = cur_p->app0;
+
+	while (stat & STS_CTRL_APP0_CMPLT) {
+		dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
+				 DMA_TO_DEVICE);
+		if (cur_p->app4)
+			dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
+		cur_p->app0 = 0;
+
+		ndev->stats.tx_packets++;
+		ndev->stats.tx_bytes += cur_p->len;
+
+		lp->tx_bd_ci++;
+		if (lp->tx_bd_ci >= TX_BD_NUM)
+			lp->tx_bd_ci = 0;
+
+		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+		stat = cur_p->app0;
+	}
+
+	netif_wake_queue(ndev);
+}
+
+static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct cdmac_bd *cur_p;
+	dma_addr_t start_p, tail_p;
+	int ii;
+	unsigned long num_frag;
+	skb_frag_t *frag;
+
+	num_frag = skb_shinfo(skb)->nr_frags;
+	frag = &skb_shinfo(skb)->frags[0];
+	start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+
+	if (cur_p->app0 & STS_CTRL_APP0_CMPLT) {
+		if (!netif_queue_stopped(ndev)) {
+			netif_stop_queue(ndev);
+			return NETDEV_TX_BUSY;
+		}
+		return NETDEV_TX_BUSY;
+	}
+
+	cur_p->app0 = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		const struct iphdr *ip = ip_hdr(skb);
+		int length = 0, start = 0, insert = 0;
+
+		switch (ip->protocol) {
+		case IPPROTO_TCP:
+			start = sizeof(struct iphdr) + ETH_HLEN;
+			insert = sizeof(struct iphdr) + ETH_HLEN + 16;
+			length = ip->tot_len - sizeof(struct iphdr);
+			break;
+		case IPPROTO_UDP:
+			start = sizeof(struct iphdr) + ETH_HLEN;
+			insert = sizeof(struct iphdr) + ETH_HLEN + 6;
+			length = ip->tot_len - sizeof(struct iphdr);
+			break;
+		default:
+			break;
+		}
+		cur_p->app1 = ((start << 16) | insert);
+		cur_p->app2 = csum_tcpudp_magic(ip->saddr, ip->daddr,
+						length, ip->protocol, 0);
+		skb->data[insert] = 0;
+		skb->data[insert + 1] = 0;
+	}
+	cur_p->app0 |= STS_CTRL_APP0_SOP;
+	cur_p->len = skb_headlen(skb);
+	cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
+				     DMA_TO_DEVICE);
+	cur_p->app4 = (unsigned long)skb;
+
+	for (ii = 0; ii < num_frag; ii++) {
+		lp->tx_bd_tail++;
+		if (lp->tx_bd_tail >= TX_BD_NUM)
+			lp->tx_bd_tail = 0;
+
+		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+		cur_p->phys = dma_map_single(ndev->dev.parent,
+					     (void *)page_address(frag->page) +
+					          frag->page_offset,
+					     frag->size, DMA_TO_DEVICE);
+		cur_p->len = frag->size;
+		cur_p->app0 = 0;
+		frag++;
+	}
+	cur_p->app0 |= STS_CTRL_APP0_EOP;
+
+	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+	lp->tx_bd_tail++;
+	if (lp->tx_bd_tail >= TX_BD_NUM)
+		lp->tx_bd_tail = 0;
+
+	/* Kick off the transfer */
+	temac_dma_out32(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
+
+	return 0;
+}
+
+
+static void ll_temac_recv(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct sk_buff *skb, *new_skb;
+	unsigned int bdstat;
+	struct cdmac_bd *cur_p;
+	dma_addr_t tail_p;
+	int length;
+	unsigned long skb_vaddr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lp->rx_lock, flags);
+
+	tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+	cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+
+	bdstat = cur_p->app0;
+	while ((bdstat & STS_CTRL_APP0_CMPLT)) {
+
+		skb = lp->rx_skb[lp->rx_bd_ci];
+		length = cur_p->app4;
+
+		skb_vaddr = virt_to_bus(skb->data);
+		dma_unmap_single(ndev->dev.parent, skb_vaddr, length,
+				 DMA_FROM_DEVICE);
+
+		skb_put(skb, length);
+		skb->dev = ndev;
+		skb->protocol = eth_type_trans(skb, ndev);
+		skb->ip_summed = CHECKSUM_NONE;
+
+		netif_rx(skb);
+
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += length;
+
+		new_skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE + XTE_ALIGN,
+				GFP_ATOMIC);
+		if (new_skb == 0) {
+			dev_err(&ndev->dev, "no memory for new sk_buff\n");
+			spin_unlock_irqrestore(&lp->rx_lock, flags);
+			return;
+		}
+
+		skb_reserve(new_skb, BUFFER_ALIGN(new_skb->data));
+
+		cur_p->app0 = STS_CTRL_APP0_IRQONEND;
+		cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
+					     XTE_MAX_JUMBO_FRAME_SIZE,
+					     DMA_FROM_DEVICE);
+		cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
+		lp->rx_skb[lp->rx_bd_ci] = new_skb;
+
+		lp->rx_bd_ci++;
+		if (lp->rx_bd_ci >= RX_BD_NUM)
+			lp->rx_bd_ci = 0;
+
+		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+		bdstat = cur_p->app0;
+	}
+	temac_dma_out32(lp, RX_TAILDESC_PTR, tail_p);
+
+	spin_unlock_irqrestore(&lp->rx_lock, flags);
+}
+
+static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
+{
+	struct net_device *ndev = _ndev;
+	struct temac_local *lp = netdev_priv(ndev);
+	unsigned int status;
+
+	status = temac_dma_in32(lp, TX_IRQ_REG);
+	temac_dma_out32(lp, TX_IRQ_REG, status);
+
+	if (status & (IRQ_COAL | IRQ_DLY))
+		temac_start_xmit_done(lp->ndev);
+	if (status & 0x080)
+		dev_err(&ndev->dev, "DMA error 0x%x\n", status);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
+{
+	struct net_device *ndev = _ndev;
+	struct temac_local *lp = netdev_priv(ndev);
+	unsigned int status;
+
+	/* Read and clear the status registers */
+	status = temac_dma_in32(lp, RX_IRQ_REG);
+	temac_dma_out32(lp, RX_IRQ_REG, status);
+
+	if (status & (IRQ_COAL | IRQ_DLY))
+		ll_temac_recv(lp->ndev);
+
+	return IRQ_HANDLED;
+}
+
+static int temac_open(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	int rc;
+
+	dev_dbg(&ndev->dev, "temac_open()\n");
+
+	if (lp->phy_node) {
+		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     temac_adjust_link, 0, 0);
+		if (!lp->phy_dev) {
+			dev_err(lp->dev, "of_phy_connect() failed\n");
+			return -ENODEV;
+		}
+
+		phy_start(lp->phy_dev);
+	}
+
+	rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
+	if (rc)
+		goto err_tx_irq;
+	rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev);
+	if (rc)
+		goto err_rx_irq;
+
+	temac_device_reset(ndev);
+	return 0;
+
+ err_rx_irq:
+	free_irq(lp->tx_irq, ndev);
+ err_tx_irq:
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+	dev_err(lp->dev, "request_irq() failed\n");
+	return rc;
+}
+
+static int temac_stop(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+
+	dev_dbg(&ndev->dev, "temac_close()\n");
+
+	free_irq(lp->tx_irq, ndev);
+	free_irq(lp->rx_irq, ndev);
+
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+temac_poll_controller(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+
+	disable_irq(lp->tx_irq);
+	disable_irq(lp->rx_irq);
+
+	ll_temac_rx_irq(lp->tx_irq, lp);
+	ll_temac_tx_irq(lp->rx_irq, lp);
+
+	enable_irq(lp->tx_irq);
+	enable_irq(lp->rx_irq);
+}
+#endif
+
+static const struct net_device_ops temac_netdev_ops = {
+	.ndo_open = temac_open,
+	.ndo_stop = temac_stop,
+	.ndo_start_xmit = temac_start_xmit,
+	.ndo_set_mac_address = temac_set_mac_address,
+	//.ndo_set_multicast_list = temac_set_multicast_list,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = temac_poll_controller,
+#endif
+};
+
+/* ---------------------------------------------------------------------
+ * SYSFS device attributes
+ */
+static ssize_t temac_show_llink_regs(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct temac_local *lp = netdev_priv(ndev);
+	int i, len = 0;
+
+	for (i = 0; i < 0x11; i++)
+		len += sprintf(buf + len, "%.8x%s", temac_dma_in32(lp, i),
+			       (i % 8) == 7 ? "\n" : " ");
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL);
+
+static struct attribute *temac_device_attrs[] = {
+	&dev_attr_llink_regs.attr,
+	NULL,
+};
+
+static const struct attribute_group temac_attr_group = {
+	.attrs = temac_device_attrs,
+};
+
+static int __init
+temac_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+	struct device_node *np;
+	struct temac_local *lp;
+	struct net_device *ndev;
+	const void *addr;
+	int size, rc = 0;
+	unsigned int dcrs;
+
+	/* Init network device structure */
+	ndev = alloc_etherdev(sizeof(*lp));
+	if (!ndev) {
+		dev_err(&op->dev, "could not allocate device.\n");
+		return -ENOMEM;
+	}
+	ether_setup(ndev);
+	dev_set_drvdata(&op->dev, ndev);
+	SET_NETDEV_DEV(ndev, &op->dev);
+	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
+	ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
+	ndev->netdev_ops = &temac_netdev_ops;
+#if 0
+	ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */
+	ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */
+	ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */
+	ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */
+	ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */
+	ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */
+	ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */
+	ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */
+	ndev->features |= NETIF_F_GSO; /* Enable software GSO. */
+	ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */
+	ndev->features |= NETIF_F_LRO; /* large receive offload */
+#endif
+
+	/* setup temac private info structure */
+	lp = netdev_priv(ndev);
+	lp->ndev = ndev;
+	lp->dev = &op->dev;
+	lp->options = XTE_OPTION_DEFAULTS;
+	spin_lock_init(&lp->rx_lock);
+	mutex_init(&lp->indirect_mutex);
+
+	/* map device registers */
+	lp->regs = of_iomap(op->node, 0);
+	if (!lp->regs) {
+		dev_err(&op->dev, "could not map temac regs.\n");
+		goto nodev;
+	}
+
+	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
+	np = of_parse_phandle(op->node, "llink-connected", 0);
+	if (!np) {
+		dev_err(&op->dev, "could not find DMA node\n");
+		goto nodev;
+	}
+
+	dcrs = dcr_resource_start(np, 0);
+	if (dcrs == 0) {
+		dev_err(&op->dev, "could not get DMA register address\n");
+		goto nodev;;
+	}
+	lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+	dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
+
+	lp->rx_irq = irq_of_parse_and_map(np, 0);
+	lp->tx_irq = irq_of_parse_and_map(np, 1);
+	if (!lp->rx_irq || !lp->tx_irq) {
+		dev_err(&op->dev, "could not determine irqs\n");
+		rc = -ENOMEM;
+		goto nodev;
+	}
+
+	of_node_put(np); /* Finished with the DMA node; drop the reference */
+
+	/* Retrieve the MAC address */
+	addr = of_get_property(op->node, "local-mac-address", &size);
+	if ((!addr) || (size != 6)) {
+		dev_err(&op->dev, "could not find MAC address\n");
+		rc = -ENODEV;
+		goto nodev;
+	}
+	temac_set_mac_address(ndev, (void *)addr);
+
+	rc = temac_mdio_setup(lp, op->node);
+	if (rc)
+		dev_warn(&op->dev, "error registering MDIO bus\n");
+
+	lp->phy_node = of_parse_phandle(op->node, "phy-handle", 0);
+	if (lp->phy_node)
+		dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np);
+
+	/* Add the device attributes */
+	rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
+	if (rc) {
+		dev_err(lp->dev, "Error creating sysfs files\n");
+		goto nodev;
+	}
+
+	rc = register_netdev(lp->ndev);
+	if (rc) {
+		dev_err(lp->dev, "register_netdev() error (%i)\n", rc);
+		goto err_register_ndev;
+	}
+
+	return 0;
+
+ err_register_ndev:
+	sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ nodev:
+	free_netdev(ndev);
+	ndev = NULL;
+	return rc;
+}
+
+static int __devexit temac_of_remove(struct of_device *op)
+{
+	struct net_device *ndev = dev_get_drvdata(&op->dev);
+	struct temac_local *lp = netdev_priv(ndev);
+
+	temac_mdio_teardown(lp);
+	unregister_netdev(ndev);
+	sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+	if (lp->phy_node)
+		of_node_put(lp->phy_node);
+	lp->phy_node = NULL;
+	dev_set_drvdata(&op->dev, NULL);
+	free_netdev(ndev);
+	return 0;
+}
+
+static struct of_device_id temac_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-ll-temac-1.01.b", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, temac_of_match);
+
+static struct of_platform_driver temac_of_driver = {
+	.match_table = temac_of_match,
+	.probe = temac_of_probe,
+	.remove = __devexit_p(temac_of_remove),
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "xilinx_temac",
+	},
+};
+
+static int __init temac_init(void)
+{
+	return of_register_platform_driver(&temac_of_driver);
+}
+module_init(temac_init);
+
+static void __exit temac_exit(void)
+{
+	of_unregister_platform_driver(&temac_of_driver);
+}
+module_exit(temac_exit);
+
+MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
+MODULE_AUTHOR("Yoshio Kashiwagi");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ll_temac_mdio.c
new file mode 100644
index 00000000000..da0e462308d
--- /dev/null
+++ b/drivers/net/ll_temac_mdio.c
@@ -0,0 +1,120 @@
+/*
+ * MDIO bus driver for the Xilinx TEMAC device
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+
+#include "ll_temac.h"
+
+/* ---------------------------------------------------------------------
+ * MDIO Bus functions
+ */
+static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct temac_local *lp = bus->priv;
+	u32 rc;
+
+	/* Write the PHY address to the MIIM Access Initiator register.
+	 * When the transfer completes, the PHY register value will appear
+	 * in the LSW0 register */
+	mutex_lock(&lp->indirect_mutex);
+	temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
+	rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
+	mutex_unlock(&lp->indirect_mutex);
+
+	dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		phy_id, reg, rc);
+
+	return rc;
+}
+
+static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+	struct temac_local *lp = bus->priv;
+
+	dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		phy_id, reg, val);
+
+	/* First write the desired value into the write data register
+	 * and then write the address into the access initiator register
+	 */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
+	temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
+	mutex_unlock(&lp->indirect_mutex);
+
+	return 0;
+}
+
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
+{
+	struct mii_bus *bus;
+	const u32 *bus_hz;
+	int clk_div;
+	int rc, size;
+	struct resource res;
+
+	/* Calculate a reasonable divisor for the clock rate */
+	clk_div = 0x3f; /* worst-case default setting */
+	bus_hz = of_get_property(np, "clock-frequency", &size);
+	if (bus_hz && size >= sizeof(*bus_hz)) {
+		clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
+		if (clk_div < 1)
+			clk_div = 1;
+		if (clk_div > 0x3f)
+			clk_div = 0x3f;
+	}
+
+	/* Enable the MDIO bus by asserting the enable bit and writing
+	 * in the clock config */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
+	mutex_unlock(&lp->indirect_mutex);
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return -ENOMEM;
+
+	of_address_to_resource(np, 0, &res);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+		 (unsigned long long)res.start);
+	bus->priv = lp;
+	bus->name = "Xilinx TEMAC MDIO";
+	bus->read = temac_mdio_read;
+	bus->write = temac_mdio_write;
+	bus->parent = lp->dev;
+	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+	lp->mii_bus = bus;
+
+	rc = of_mdiobus_register(bus, np);
+	if (rc)
+		goto err_register;
+
+	mutex_lock(&lp->indirect_mutex);
+	dev_dbg(lp->dev, "MDIO bus registered;  MC:%x\n",
+		temac_indirect_in32(lp, XTE_MC_OFFSET));
+	mutex_unlock(&lp->indirect_mutex);
+	return 0;
+
+ err_register:
+	mdiobus_free(bus);
+	return rc;
+}
+
+void temac_mdio_teardown(struct temac_local *lp)
+{
+	mdiobus_unregister(lp->mii_bus);
+	kfree(lp->mii_bus->irq);
+	mdiobus_free(lp->mii_bus);
+	lp->mii_bus = NULL;
+}
+
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index b7d438a367f..da472c68748 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -62,6 +62,7 @@
 struct pcpu_lstats {
 	unsigned long packets;
 	unsigned long bytes;
+	unsigned long drops;
 };
 
 /*
@@ -71,18 +72,22 @@ struct pcpu_lstats {
 static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct pcpu_lstats *pcpu_lstats, *lb_stats;
+	int len;
 
 	skb_orphan(skb);
 
-	skb->protocol = eth_type_trans(skb,dev);
+	skb->protocol = eth_type_trans(skb, dev);
 
 	/* it's OK to use per_cpu_ptr() because BHs are off */
 	pcpu_lstats = dev->ml_priv;
 	lb_stats = per_cpu_ptr(pcpu_lstats, smp_processor_id());
-	lb_stats->bytes += skb->len;
-	lb_stats->packets++;
 
-	netif_rx(skb);
+	len = skb->len;
+	if (likely(netif_rx(skb) == NET_RX_SUCCESS)) {
+		lb_stats->bytes += len;
+		lb_stats->packets++;
+	} else
+		lb_stats->drops++;
 
 	return 0;
 }
@@ -93,6 +98,7 @@ static struct net_device_stats *loopback_get_stats(struct net_device *dev)
 	struct net_device_stats *stats = &dev->stats;
 	unsigned long bytes = 0;
 	unsigned long packets = 0;
+	unsigned long drops = 0;
 	int i;
 
 	pcpu_lstats = dev->ml_priv;
@@ -102,11 +108,14 @@ static struct net_device_stats *loopback_get_stats(struct net_device *dev)
 		lb_stats = per_cpu_ptr(pcpu_lstats, i);
 		bytes   += lb_stats->bytes;
 		packets += lb_stats->packets;
+		drops   += lb_stats->drops;
 	}
 	stats->rx_packets = packets;
 	stats->tx_packets = packets;
-	stats->rx_bytes = bytes;
-	stats->tx_bytes = bytes;
+	stats->rx_dropped = drops;
+	stats->rx_errors  = drops;
+	stats->rx_bytes   = bytes;
+	stats->tx_bytes   = bytes;
 	return stats;
 }
 
@@ -161,6 +170,7 @@ static void loopback_setup(struct net_device *dev)
 	dev->tx_queue_len	= 0;
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 	dev->features 		= NETIF_F_SG | NETIF_F_FRAGLIST
 		| NETIF_F_TSO
 		| NETIF_F_NO_CSUM
diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 22e74a0e036..f8fa0c3f0f6 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -620,19 +620,12 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 
 	/* Good, done, now spit out some messages */
 	printk(KERN_INFO "%s: %s in slot %X (type %s)\n",
-		   dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
-	printk(KERN_INFO "MAC ");
-	{
-		int i;
-		for (i = 0; i < 6; i++) {
-			printk("%2.2x", dev->dev_addr[i]);
-			if (i < 5)
-				printk(":");
-		}
-	}
-	printk(" IRQ %d, %d KB shared memory at %#lx,  %d-bit access.\n",
-		   dev->irq, (int)((dev->mem_end - dev->mem_start)/0x1000) * 4,
-		   dev->mem_start, access_bitmode?32:16);
+	       dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
+	printk(KERN_INFO
+	       "MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
+	       dev->dev_addr, dev->irq,
+	       (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
+	       dev->mem_start, access_bitmode ? 32 : 16);
 	return 0;
 }
 
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index 384e072de2e..dab45339d3a 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -73,8 +73,6 @@ static char *version =
    or override something. */
 #include <linux/module.h>
 
-#define PRINTK(x) printk x
-
 /*
   Sources:
 
@@ -402,7 +400,7 @@ net_send_packet(struct sk_buff *skb, struct net_device *dev)
 		/* Gasp!  It hasn't.  But that shouldn't happen since
 		   we're waiting for TxOk, so return 1 and requeue this packet. */
 		local_irq_restore(flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Write the contents of the packet */
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index e82aee41d77..5b5c25368d1 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -599,6 +599,21 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void macb_poll_controller(struct net_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	macb_interrupt(dev->irq, dev);
+	local_irq_restore(flags);
+}
+#endif
+
 static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct macb *bp = netdev_priv(dev);
@@ -630,7 +645,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			"BUG! Tx Ring full when queue awake!\n");
 		dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
 			bp->tx_head, bp->tx_tail);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	entry = bp->tx_head;
@@ -1094,6 +1109,9 @@ static const struct net_device_ops macb_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= macb_poll_controller,
+#endif
 };
 
 static int __init macb_probe(struct platform_device *pdev)
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index feebbd92aff..1427755c224 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -94,6 +94,16 @@ static void __mace_set_address(struct net_device *dev, void *addr);
  */
 static unsigned char *dummy_buf;
 
+static const struct net_device_ops mace_netdev_ops = {
+	.ndo_open		= mace_open,
+	.ndo_stop		= mace_close,
+	.ndo_start_xmit		= mace_xmit_start,
+	.ndo_set_multicast_list	= mace_set_multicast,
+	.ndo_set_mac_address	= mace_set_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
 {
 	struct device_node *mace = macio_get_of_node(mdev);
@@ -207,11 +217,7 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i
 		}
 	}
 
-	dev->open = mace_open;
-	dev->stop = mace_close;
-	dev->hard_start_xmit = mace_xmit_start;
-	dev->set_multicast_list = mace_set_multicast;
-	dev->set_mac_address = mace_set_address;
+	dev->netdev_ops = &mace_netdev_ops;
 
 	/*
 	 * Most of what is below could be moved to mace_open()
@@ -541,7 +547,7 @@ static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev)
 	netif_stop_queue(dev);
 	mp->tx_fullup = 1;
 	spin_unlock_irqrestore(&mp->lock, flags);
-	return 1;		/* can't take it at the moment */
+	return NETDEV_TX_BUSY;		/* can't take it at the moment */
     }
     spin_unlock_irqrestore(&mp->lock, flags);
 
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index 274e99bb63a..44f3c2896f2 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -180,6 +180,17 @@ static void mace_dma_off(struct net_device *dev)
 	psc_write_word(PSC_ENETWR_CMD + PSC_SET1, 0x1100);
 }
 
+static const struct net_device_ops mace_netdev_ops = {
+	.ndo_open		= mace_open,
+	.ndo_stop		= mace_close,
+	.ndo_start_xmit		= mace_xmit_start,
+	.ndo_tx_timeout		= mace_tx_timeout,
+	.ndo_set_multicast_list	= mace_set_multicast,
+	.ndo_set_mac_address	= mace_set_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*
  * Not really much of a probe. The hardware table tells us if this
  * model of Macintrash has a MACE (AV macintoshes)
@@ -240,13 +251,8 @@ static int __devinit mace_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	dev->open		= mace_open;
-	dev->stop		= mace_close;
-	dev->hard_start_xmit	= mace_xmit_start;
-	dev->tx_timeout		= mace_tx_timeout;
+	dev->netdev_ops		= &mace_netdev_ops;
 	dev->watchdog_timeo	= TX_TIMEOUT;
-	dev->set_multicast_list	= mace_set_multicast;
-	dev->set_mac_address	= mace_set_address;
 
 	printk(KERN_INFO "%s: 68K MACE, hardware address %pM\n",
 	       dev->name, dev->dev_addr);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 214a8cf2b70..99eed9f37c8 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -232,7 +232,7 @@ static int macvlan_open(struct net_device *dev)
 	if (macvlan_addr_busy(vlan->port, dev->dev_addr))
 		goto out;
 
-	err = dev_unicast_add(lowerdev, dev->dev_addr, ETH_ALEN);
+	err = dev_unicast_add(lowerdev, dev->dev_addr);
 	if (err < 0)
 		goto out;
 	if (dev->flags & IFF_ALLMULTI) {
@@ -244,7 +244,7 @@ static int macvlan_open(struct net_device *dev)
 	return 0;
 
 del_unicast:
-	dev_unicast_delete(lowerdev, dev->dev_addr, ETH_ALEN);
+	dev_unicast_delete(lowerdev, dev->dev_addr);
 out:
 	return err;
 }
@@ -258,7 +258,7 @@ static int macvlan_stop(struct net_device *dev)
 	if (dev->flags & IFF_ALLMULTI)
 		dev_set_allmulti(lowerdev, -1);
 
-	dev_unicast_delete(lowerdev, dev->dev_addr, ETH_ALEN);
+	dev_unicast_delete(lowerdev, dev->dev_addr);
 
 	macvlan_hash_del(vlan);
 	return 0;
@@ -282,10 +282,11 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p)
 		if (macvlan_addr_busy(vlan->port, addr->sa_data))
 			return -EBUSY;
 
-		if ((err = dev_unicast_add(lowerdev, addr->sa_data, ETH_ALEN)))
+		err = dev_unicast_add(lowerdev, addr->sa_data);
+		if (err)
 			return err;
 
-		dev_unicast_delete(lowerdev, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(lowerdev, dev->dev_addr);
 
 		macvlan_hash_change_addr(vlan, addr->sa_data);
 	}
@@ -358,6 +359,7 @@ static int macvlan_init(struct net_device *dev)
 				  (lowerdev->state & MACVLAN_STATE_MASK);
 	dev->features 		= lowerdev->features & MACVLAN_FEATURES;
 	dev->iflink		= lowerdev->ifindex;
+	dev->hard_header_len	= lowerdev->hard_header_len;
 
 	macvlan_set_lockdep_class(dev);
 
@@ -374,36 +376,20 @@ static void macvlan_ethtool_get_drvinfo(struct net_device *dev,
 static u32 macvlan_ethtool_get_rx_csum(struct net_device *dev)
 {
 	const struct macvlan_dev *vlan = netdev_priv(dev);
-	struct net_device *lowerdev = vlan->lowerdev;
-
-	if (lowerdev->ethtool_ops == NULL ||
-	    lowerdev->ethtool_ops->get_rx_csum == NULL)
-		return 0;
-	return lowerdev->ethtool_ops->get_rx_csum(lowerdev);
+	return dev_ethtool_get_rx_csum(vlan->lowerdev);
 }
 
 static int macvlan_ethtool_get_settings(struct net_device *dev,
 					struct ethtool_cmd *cmd)
 {
 	const struct macvlan_dev *vlan = netdev_priv(dev);
-	struct net_device *lowerdev = vlan->lowerdev;
-
-	if (!lowerdev->ethtool_ops ||
-	    !lowerdev->ethtool_ops->get_settings)
-		return -EOPNOTSUPP;
-
-	return lowerdev->ethtool_ops->get_settings(lowerdev, cmd);
+	return dev_ethtool_get_settings(vlan->lowerdev, cmd);
 }
 
 static u32 macvlan_ethtool_get_flags(struct net_device *dev)
 {
 	const struct macvlan_dev *vlan = netdev_priv(dev);
-	struct net_device *lowerdev = vlan->lowerdev;
-
-	if (!lowerdev->ethtool_ops ||
-	    !lowerdev->ethtool_ops->get_flags)
-		return 0;
-	return lowerdev->ethtool_ops->get_flags(lowerdev);
+	return dev_ethtool_get_flags(vlan->lowerdev);
 }
 
 static const struct ethtool_ops macvlan_ethtool_ops = {
@@ -430,6 +416,7 @@ static void macvlan_setup(struct net_device *dev)
 {
 	ether_setup(dev);
 
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 	dev->netdev_ops		= &macvlan_netdev_ops;
 	dev->destructor		= free_netdev;
 	dev->header_ops		= &macvlan_hard_header_ops,
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
new file mode 100644
index 00000000000..dc45e9856c3
--- /dev/null
+++ b/drivers/net/mdio.c
@@ -0,0 +1,431 @@
+/*
+ * mdio.c: Generic support for MDIO-compatible transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/errno.h>
+#include <linux/ethtool.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+
+/**
+ * mdio45_probe - probe for an MDIO (clause 45) device
+ * @mdio: MDIO interface
+ * @prtad: Expected PHY address
+ *
+ * This sets @prtad and @mmds in the MDIO interface if successful.
+ * Returns 0 on success, negative on error.
+ */
+int mdio45_probe(struct mdio_if_info *mdio, int prtad)
+{
+	int mmd, stat2, devs1, devs2;
+
+	/* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
+	 * XS or DTE XS; give up if none is present. */
+	for (mmd = 1; mmd <= 5; mmd++) {
+		/* Is this MMD present? */
+		stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2);
+		if (stat2 < 0 ||
+		    (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
+			continue;
+
+		/* It should tell us about all the other MMDs */
+		devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1);
+		devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2);
+		if (devs1 < 0 || devs2 < 0)
+			continue;
+
+		mdio->prtad = prtad;
+		mdio->mmds = devs1 | (devs2 << 16);
+		return 0;
+	}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(mdio45_probe);
+
+/**
+ * mdio_set_flag - set or clear flag in an MDIO register
+ * @mdio: MDIO interface
+ * @prtad: PHY address
+ * @devad: MMD address
+ * @addr: Register address
+ * @mask: Mask for flag (single bit set)
+ * @sense: New value of flag
+ *
+ * This debounces changes: it does not write the register if the flag
+ * already has the proper value.  Returns 0 on success, negative on error.
+ */
+int mdio_set_flag(const struct mdio_if_info *mdio,
+		  int prtad, int devad, u16 addr, int mask,
+		  bool sense)
+{
+	int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr);
+	int new_val;
+
+	if (old_val < 0)
+		return old_val;
+	if (sense)
+		new_val = old_val | mask;
+	else
+		new_val = old_val & ~mask;
+	if (old_val == new_val)
+		return 0;
+	return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val);
+}
+EXPORT_SYMBOL(mdio_set_flag);
+
+/**
+ * mdio_link_ok - is link status up/OK
+ * @mdio: MDIO interface
+ * @mmd_mask: Mask for MMDs to check
+ *
+ * Returns 1 if the PHY reports link status up/OK, 0 otherwise.
+ * @mmd_mask is normally @mdio->mmds, but if loopback is enabled
+ * the MMDs being bypassed should be excluded from the mask.
+ */
+int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask)
+{
+	int devad, reg;
+
+	if (!mmd_mask) {
+		/* Use absence of XGMII faults in lieu of link state */
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad,
+				      MDIO_MMD_PHYXS, MDIO_STAT2);
+		return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT);
+	}
+
+	for (devad = 0; mmd_mask; devad++) {
+		if (mmd_mask & (1 << devad)) {
+			mmd_mask &= ~(1 << devad);
+
+			/* Read twice because link state is latched and a
+			 * read moves the current state into the register */
+			mdio->mdio_read(mdio->dev, mdio->prtad,
+					devad, MDIO_STAT1);
+			reg = mdio->mdio_read(mdio->dev, mdio->prtad,
+					      devad, MDIO_STAT1);
+			if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+				return false;
+		}
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(mdio45_links_ok);
+
+/**
+ * mdio45_nway_restart - restart auto-negotiation for this interface
+ * @mdio: MDIO interface
+ *
+ * Returns 0 on success, negative on error.
+ */
+int mdio45_nway_restart(const struct mdio_if_info *mdio)
+{
+	if (!(mdio->mmds & MDIO_DEVS_AN))
+		return -EOPNOTSUPP;
+
+	mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1,
+		      MDIO_AN_CTRL1_RESTART, true);
+	return 0;
+}
+EXPORT_SYMBOL(mdio45_nway_restart);
+
+static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
+{
+	u32 result = 0;
+	int reg;
+
+	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr);
+	if (reg & ADVERTISE_10HALF)
+		result |= ADVERTISED_10baseT_Half;
+	if (reg & ADVERTISE_10FULL)
+		result |= ADVERTISED_10baseT_Full;
+	if (reg & ADVERTISE_100HALF)
+		result |= ADVERTISED_100baseT_Half;
+	if (reg & ADVERTISE_100FULL)
+		result |= ADVERTISED_100baseT_Full;
+	return result;
+}
+
+/**
+ * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ * @npage_adv: Modes currently advertised on next pages
+ * @npage_lpa: Modes advertised by link partner on next pages
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them.  The
+ * caller must pass them in.
+ */
+void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
+			       struct ethtool_cmd *ecmd,
+			       u32 npage_adv, u32 npage_lpa)
+{
+	int reg;
+
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->phy_address = mdio->prtad;
+	ecmd->mdio_support =
+		mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22);
+
+	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+			      MDIO_CTRL2);
+	switch (reg & MDIO_PMA_CTRL2_TYPE) {
+	case MDIO_PMA_CTRL2_10GBT:
+	case MDIO_PMA_CTRL2_1000BT:
+	case MDIO_PMA_CTRL2_100BTX:
+	case MDIO_PMA_CTRL2_10BT:
+		ecmd->port = PORT_TP;
+		ecmd->supported = SUPPORTED_TP;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_SPEED);
+		if (reg & MDIO_SPEED_10G)
+			ecmd->supported |= SUPPORTED_10000baseT_Full;
+		if (reg & MDIO_PMA_SPEED_1000)
+			ecmd->supported |= (SUPPORTED_1000baseT_Full |
+					    SUPPORTED_1000baseT_Half);
+		if (reg & MDIO_PMA_SPEED_100)
+			ecmd->supported |= (SUPPORTED_100baseT_Full |
+					    SUPPORTED_100baseT_Half);
+		if (reg & MDIO_PMA_SPEED_10)
+			ecmd->supported |= (SUPPORTED_10baseT_Full |
+					    SUPPORTED_10baseT_Half);
+		ecmd->advertising = ADVERTISED_TP;
+		break;
+
+	case MDIO_PMA_CTRL2_10GBCX4:
+		ecmd->port = PORT_OTHER;
+		ecmd->supported = 0;
+		ecmd->advertising = 0;
+		break;
+
+	case MDIO_PMA_CTRL2_10GBKX4:
+	case MDIO_PMA_CTRL2_10GBKR:
+	case MDIO_PMA_CTRL2_1000BKX:
+		ecmd->port = PORT_OTHER;
+		ecmd->supported = SUPPORTED_Backplane;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_PMA_EXTABLE);
+		if (reg & MDIO_PMA_EXTABLE_10GBKX4)
+			ecmd->supported |= SUPPORTED_10000baseKX4_Full;
+		if (reg & MDIO_PMA_EXTABLE_10GBKR)
+			ecmd->supported |= SUPPORTED_10000baseKR_Full;
+		if (reg & MDIO_PMA_EXTABLE_1000BKX)
+			ecmd->supported |= SUPPORTED_1000baseKX_Full;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_PMA_10GBR_FECABLE);
+		if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
+			ecmd->supported |= SUPPORTED_10000baseR_FEC;
+		ecmd->advertising = ADVERTISED_Backplane;
+		break;
+
+	/* All the other defined modes are flavours of optical */
+	default:
+		ecmd->port = PORT_FIBRE;
+		ecmd->supported = SUPPORTED_FIBRE;
+		ecmd->advertising = ADVERTISED_FIBRE;
+		break;
+	}
+
+	if (mdio->mmds & MDIO_DEVS_AN) {
+		ecmd->supported |= SUPPORTED_Autoneg;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+				      MDIO_CTRL1);
+		if (reg & MDIO_AN_CTRL1_ENABLE) {
+			ecmd->autoneg = AUTONEG_ENABLE;
+			ecmd->advertising |=
+				ADVERTISED_Autoneg |
+				mdio45_get_an(mdio, MDIO_AN_ADVERTISE) |
+				npage_adv;
+		} else {
+			ecmd->autoneg = AUTONEG_DISABLE;
+		}
+	} else {
+		ecmd->autoneg = AUTONEG_DISABLE;
+	}
+
+	if (ecmd->autoneg) {
+		u32 modes = 0;
+		int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
+					      MDIO_MMD_AN, MDIO_STAT1);
+
+		/* If AN is complete and successful, report best common
+		 * mode, otherwise report best advertised mode. */
+		if (an_stat & MDIO_AN_STAT1_COMPLETE) {
+			ecmd->lp_advertising =
+				mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa;
+			if (an_stat & MDIO_AN_STAT1_LPABLE)
+				ecmd->lp_advertising |= ADVERTISED_Autoneg;
+			modes = ecmd->advertising & ecmd->lp_advertising;
+		}
+		if ((modes & ~ADVERTISED_Autoneg) == 0)
+			modes = ecmd->advertising;
+
+		if (modes & (ADVERTISED_10000baseT_Full |
+			     ADVERTISED_10000baseKX4_Full |
+			     ADVERTISED_10000baseKR_Full)) {
+			ecmd->speed = SPEED_10000;
+			ecmd->duplex = DUPLEX_FULL;
+		} else if (modes & (ADVERTISED_1000baseT_Full |
+				    ADVERTISED_1000baseT_Half |
+				    ADVERTISED_1000baseKX_Full)) {
+			ecmd->speed = SPEED_1000;
+			ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
+		} else if (modes & (ADVERTISED_100baseT_Full |
+				    ADVERTISED_100baseT_Half)) {
+			ecmd->speed = SPEED_100;
+			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
+		} else {
+			ecmd->speed = SPEED_10;
+			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
+		}
+	} else {
+		/* Report forced settings */
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_CTRL1);
+		ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
+			       ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
+		ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
+				ecmd->speed == SPEED_10000);
+	}
+
+	/* 10GBASE-T MDI/MDI-X */
+	if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
+		switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+					MDIO_PMA_10GBT_SWAPPOL)) {
+		case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
+			ecmd->eth_tp_mdix = ETH_TP_MDI;
+			break;
+		case 0:
+			ecmd->eth_tp_mdix = ETH_TP_MDI_X;
+			break;
+		default:
+			/* It's complicated... */
+			ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(mdio45_ethtool_gset_npage);
+
+/**
+ * mdio45_ethtool_spauseparam_an - set auto-negotiated pause parameters
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ *
+ * This function assumes that the PHY has an auto-negotiation MMD.  It
+ * will enable and disable advertising of flow control as appropriate.
+ */
+void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
+				   const struct ethtool_pauseparam *ecmd)
+{
+	int adv, old_adv;
+
+	WARN_ON(!(mdio->mmds & MDIO_DEVS_AN));
+
+	old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+				  MDIO_AN_ADVERTISE);
+	adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
+	if (ecmd->autoneg)
+		adv |= mii_advertise_flowctrl(
+			(ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
+			(ecmd->tx_pause ? FLOW_CTRL_TX : 0));
+	if (adv != old_adv) {
+		mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+				 MDIO_AN_ADVERTISE, adv);
+		mdio45_nway_restart(mdio);
+	}
+}
+EXPORT_SYMBOL(mdio45_ethtool_spauseparam_an);
+
+/**
+ * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
+ * @mdio: MDIO interface
+ * @mii_data: MII ioctl data structure
+ * @cmd: MII ioctl command
+ *
+ * Returns 0 on success, negative on error.
+ */
+int mdio_mii_ioctl(const struct mdio_if_info *mdio,
+		   struct mii_ioctl_data *mii_data, int cmd)
+{
+	int prtad, devad;
+	u16 addr = mii_data->reg_num;
+
+	/* Validate/convert cmd to one of SIOC{G,S}MIIREG */
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		if (mdio->prtad == MDIO_PRTAD_NONE)
+			return -EOPNOTSUPP;
+		mii_data->phy_id = mdio->prtad;
+		cmd = SIOCGMIIREG;
+		break;
+	case SIOCGMIIREG:
+		break;
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	/* Validate/convert phy_id */
+	if ((mdio->mode_support & MDIO_SUPPORTS_C45) &&
+	    mdio_phy_id_is_c45(mii_data->phy_id)) {
+		prtad = mdio_phy_id_prtad(mii_data->phy_id);
+		devad = mdio_phy_id_devad(mii_data->phy_id);
+	} else if ((mdio->mode_support & MDIO_SUPPORTS_C22) &&
+		   mii_data->phy_id < 0x20) {
+		prtad = mii_data->phy_id;
+		devad = MDIO_DEVAD_NONE;
+		addr &= 0x1f;
+	} else if ((mdio->mode_support & MDIO_EMULATE_C22) &&
+		   mdio->prtad != MDIO_PRTAD_NONE &&
+		   mii_data->phy_id == mdio->prtad) {
+		/* Remap commonly-used MII registers. */
+		prtad = mdio->prtad;
+		switch (addr) {
+		case MII_BMCR:
+		case MII_BMSR:
+		case MII_PHYSID1:
+		case MII_PHYSID2:
+			devad = __ffs(mdio->mmds);
+			break;
+		case MII_ADVERTISE:
+		case MII_LPA:
+			if (!(mdio->mmds & MDIO_DEVS_AN))
+				return -EINVAL;
+			devad = MDIO_MMD_AN;
+			if (addr == MII_ADVERTISE)
+				addr = MDIO_AN_ADVERTISE;
+			else
+				addr = MDIO_AN_LPA;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	if (cmd == SIOCGMIIREG) {
+		int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr);
+		if (rc < 0)
+			return rc;
+		mii_data->val_out = rc;
+		return 0;
+	} else {
+		return mdio->mdio_write(mdio->dev, prtad, devad, addr,
+					mii_data->val_in);
+	}
+}
+EXPORT_SYMBOL(mdio_mii_ioctl);
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index dbd3436912b..5d04d94f2a2 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -770,9 +770,17 @@ static int meth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	}
 }
 
-/*
- * Return statistics to the caller
- */
+static const struct net_device_ops meth_netdev_ops = {
+	.ndo_open		= meth_open,
+	.ndo_stop		= meth_release,
+	.ndo_start_xmit		= meth_tx,
+	.ndo_do_ioctl		= meth_ioctl,
+	.ndo_tx_timeout		= meth_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 /*
  * The init function.
  */
@@ -786,16 +794,10 @@ static int __init meth_probe(struct platform_device *pdev)
 	if (!dev)
 		return -ENOMEM;
 
-	dev->open            = meth_open;
-	dev->stop            = meth_release;
-	dev->hard_start_xmit = meth_tx;
-	dev->do_ioctl        = meth_ioctl;
-#ifdef HAVE_TX_TIMEOUT
-	dev->tx_timeout      = meth_tx_timeout;
-	dev->watchdog_timeo  = timeout;
-#endif
-	dev->irq	     = MACE_ETHERNET_IRQ;
-	dev->base_addr	     = (unsigned long)&mace->eth;
+	dev->netdev_ops		= &meth_netdev_ops;
+	dev->watchdog_timeo	= timeout;
+	dev->irq		= MACE_ETHERNET_IRQ;
+	dev->base_addr		= (unsigned long)&mace->eth;
 	memcpy(dev->dev_addr, o2meth_eaddr, 6);
 
 	priv = netdev_priv(dev);
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index 92056051f26..d81a5d22a3a 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -31,7 +31,27 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
+
+static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
+{
+	u32 result = 0;
+	int advert;
+
+	advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
+	if (advert & LPA_LPACK)
+		result |= ADVERTISED_Autoneg;
+	if (advert & ADVERTISE_10HALF)
+		result |= ADVERTISED_10baseT_Half;
+	if (advert & ADVERTISE_10FULL)
+		result |= ADVERTISED_10baseT_Full;
+	if (advert & ADVERTISE_100HALF)
+		result |= ADVERTISED_100baseT_Half;
+	if (advert & ADVERTISE_100FULL)
+		result |= ADVERTISED_100baseT_Full;
+
+	return result;
+}
 
 /**
  * mii_ethtool_gset - get settings that are specified in @ecmd
@@ -43,8 +63,8 @@
 int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 {
 	struct net_device *dev = mii->dev;
-	u32 advert, bmcr, lpa, nego;
-	u32 advert2 = 0, bmcr2 = 0, lpa2 = 0;
+	u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
+	u32 nego;
 
 	ecmd->supported =
 	    (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
@@ -62,50 +82,51 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 
 	/* this isn't fully supported at higher layers */
 	ecmd->phy_address = mii->phy_id;
+	ecmd->mdio_support = MDIO_SUPPORTS_C22;
 
 	ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
-	advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
-	if (mii->supports_gmii)
-		advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
-
-	if (advert & ADVERTISE_10HALF)
-		ecmd->advertising |= ADVERTISED_10baseT_Half;
-	if (advert & ADVERTISE_10FULL)
-		ecmd->advertising |= ADVERTISED_10baseT_Full;
-	if (advert & ADVERTISE_100HALF)
-		ecmd->advertising |= ADVERTISED_100baseT_Half;
-	if (advert & ADVERTISE_100FULL)
-		ecmd->advertising |= ADVERTISED_100baseT_Full;
-	if (advert2 & ADVERTISE_1000HALF)
-		ecmd->advertising |= ADVERTISED_1000baseT_Half;
-	if (advert2 & ADVERTISE_1000FULL)
-		ecmd->advertising |= ADVERTISED_1000baseT_Full;
 
 	bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
-	lpa = mii->mdio_read(dev, mii->phy_id, MII_LPA);
+	bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
 	if (mii->supports_gmii) {
-		bmcr2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
-		lpa2 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
+ 		ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
+		stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
 	}
 	if (bmcr & BMCR_ANENABLE) {
 		ecmd->advertising |= ADVERTISED_Autoneg;
 		ecmd->autoneg = AUTONEG_ENABLE;
 
-		nego = mii_nway_result(advert & lpa);
-		if ((bmcr2 & (ADVERTISE_1000HALF | ADVERTISE_1000FULL)) &
-		    (lpa2 >> 2))
+		ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
+		if (ctrl1000 & ADVERTISE_1000HALF)
+			ecmd->advertising |= ADVERTISED_1000baseT_Half;
+		if (ctrl1000 & ADVERTISE_1000FULL)
+			ecmd->advertising |= ADVERTISED_1000baseT_Full;
+
+		if (bmsr & BMSR_ANEGCOMPLETE) {
+			ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
+			if (stat1000 & LPA_1000HALF)
+				ecmd->lp_advertising |=
+					ADVERTISED_1000baseT_Half;
+			if (stat1000 & LPA_1000FULL)
+				ecmd->lp_advertising |=
+					ADVERTISED_1000baseT_Full;
+		} else {
+			ecmd->lp_advertising = 0;
+		}
+
+		nego = ecmd->advertising & ecmd->lp_advertising;
+
+		if (nego & (ADVERTISED_1000baseT_Full |
+			    ADVERTISED_1000baseT_Half)) {
 			ecmd->speed = SPEED_1000;
-		else if (nego == LPA_100FULL || nego == LPA_100HALF)
+			ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
+		} else if (nego & (ADVERTISED_100baseT_Full |
+				   ADVERTISED_100baseT_Half)) {
 			ecmd->speed = SPEED_100;
-		else
-			ecmd->speed = SPEED_10;
-		if ((lpa2 & LPA_1000FULL) || nego == LPA_100FULL ||
-		    nego == LPA_10FULL) {
-			ecmd->duplex = DUPLEX_FULL;
-			mii->full_duplex = 1;
+			ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
 		} else {
-			ecmd->duplex = DUPLEX_HALF;
-			mii->full_duplex = 0;
+			ecmd->speed = SPEED_10;
+			ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
 		}
 	} else {
 		ecmd->autoneg = AUTONEG_DISABLE;
@@ -116,6 +137,8 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 	}
 
+	mii->full_duplex = ecmd->duplex;
+
 	/* ignore maxtxpkt, maxrxpkt for now */
 
 	return 0;
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index 664835b822f..b3b9a147d09 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -237,6 +237,16 @@ static void mipsnet_set_mclist(struct net_device *dev)
 {
 }
 
+static const struct net_device_ops mipsnet_netdev_ops = {
+	.ndo_open		= mipsnet_open,
+	.ndo_stop		= mipsnet_close,
+	.ndo_start_xmit		= mipsnet_xmit,
+	.ndo_set_multicast_list	= mipsnet_set_mclist,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init mipsnet_probe(struct platform_device *dev)
 {
 	struct net_device *netdev;
@@ -250,10 +260,7 @@ static int __init mipsnet_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, netdev);
 
-	netdev->open			= mipsnet_open;
-	netdev->stop			= mipsnet_close;
-	netdev->hard_start_xmit		= mipsnet_xmit;
-	netdev->set_multicast_list	= mipsnet_set_mclist;
+	netdev->netdev_ops = &mipsnet_netdev_ops;
 
 	/*
 	 * TODO: probe for these or load them from PARAM
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
index 21040a0d81f..1fd068e1d93 100644
--- a/drivers/net/mlx4/Makefile
+++ b/drivers/net/mlx4/Makefile
@@ -5,5 +5,5 @@ mlx4_core-y :=	alloc.o catas.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o \
 
 obj-$(CONFIG_MLX4_EN)               += mlx4_en.o
 
-mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_params.o en_port.o en_cq.o \
+mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \
 		en_resources.o en_netdev.o
diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c
index a276125b709..21786ad4455 100644
--- a/drivers/net/mlx4/en_cq.c
+++ b/drivers/net/mlx4/en_cq.c
@@ -89,6 +89,9 @@ int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
 	*cq->mcq.arm_db    = 0;
 	memset(cq->buf, 0, cq->buf_size);
 
+	if (!cq->is_tx)
+		cq->size = priv->rx_ring[cq->ring].actual_size;
+
 	err = mlx4_cq_alloc(mdev->dev, cq->size, &cq->wqres.mtt, &mdev->priv_uar,
 			    cq->wqres.db.dma, &cq->mcq, cq->vector, cq->is_tx);
 	if (err)
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_ethtool.c
index c1bd040b9e0..091f99052c9 100644
--- a/drivers/net/mlx4/en_params.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -38,64 +38,6 @@
 #include "mlx4_en.h"
 #include "en_port.h"
 
-#define MLX4_EN_PARM_INT(X, def_val, desc) \
-	static unsigned int X = def_val;\
-	module_param(X , uint, 0444); \
-	MODULE_PARM_DESC(X, desc);
-
-
-/*
- * Device scope module parameters
- */
-
-
-/* Use a XOR rathern than Toeplitz hash function for RSS */
-MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS");
-
-/* RSS hash type mask - default to <saddr, daddr, sport, dport> */
-MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask");
-
-/* Number of LRO sessions per Rx ring (rounded up to a power of two) */
-MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS,
-		 "Number of LRO sessions per ring or disabled (0)");
-
-/* Priority pausing */
-MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
-			   " Per priority bit mask");
-MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
-			   " Per priority bit mask");
-
-int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
-{
-	struct mlx4_en_profile *params = &mdev->profile;
-	int i;
-
-	params->rss_xor = (rss_xor != 0);
-	params->rss_mask = rss_mask & 0x1f;
-	params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
-	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
-		params->prof[i].rx_pause = 1;
-		params->prof[i].rx_ppp = pfcrx;
-		params->prof[i].tx_pause = 1;
-		params->prof[i].tx_ppp = pfctx;
-		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
-		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
-	}
-	if (pfcrx || pfctx) {
-		params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
-		params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
-	} else {
-		params->prof[1].tx_ring_num = 1;
-		params->prof[2].tx_ring_num = 1;
-	}
-
-	return 0;
-}
-
-
-/*
- * Ethtool support
- */
 
 static void mlx4_en_update_lro_stats(struct mlx4_en_priv *priv)
 {
@@ -326,8 +268,7 @@ static int mlx4_en_set_coalesce(struct net_device *dev,
 
 	priv->rx_frames = (coal->rx_max_coalesced_frames ==
 			   MLX4_EN_AUTO_CONF) ?
-				MLX4_EN_RX_COAL_TARGET /
-				priv->dev->mtu + 1 :
+				MLX4_EN_RX_COAL_TARGET :
 				coal->rx_max_coalesced_frames;
 	priv->rx_usecs = (coal->rx_coalesce_usecs ==
 			  MLX4_EN_AUTO_CONF) ?
@@ -371,7 +312,7 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
 				    priv->prof->rx_pause,
 				    priv->prof->rx_ppp);
 	if (err)
-		mlx4_err(mdev, "Failed setting pause params to\n");
+		en_err(priv, "Failed setting pause params\n");
 
 	return err;
 }
@@ -421,13 +362,13 @@ static int mlx4_en_set_ringparam(struct net_device *dev,
 
 	err = mlx4_en_alloc_resources(priv);
 	if (err) {
-		mlx4_err(mdev, "Failed reallocating port resources\n");
+		en_err(priv, "Failed reallocating port resources\n");
 		goto out;
 	}
 	if (port_up) {
 		err = mlx4_en_start_port(dev);
 		if (err)
-			mlx4_err(mdev, "Failed starting port\n");
+			en_err(priv, "Failed starting port\n");
 	}
 
 out:
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 510633fd57f..9ed4a158f89 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -51,6 +51,55 @@ static const char mlx4_en_version[] =
 	DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
 	DRV_VERSION " (" DRV_RELDATE ")\n";
 
+#define MLX4_EN_PARM_INT(X, def_val, desc) \
+	static unsigned int X = def_val;\
+	module_param(X , uint, 0444); \
+	MODULE_PARM_DESC(X, desc);
+
+
+/*
+ * Device scope module parameters
+ */
+
+
+/* Use a XOR rathern than Toeplitz hash function for RSS */
+MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS");
+
+/* RSS hash type mask - default to <saddr, daddr, sport, dport> */
+MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask");
+
+/* Number of LRO sessions per Rx ring (rounded up to a power of two) */
+MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS,
+		 "Number of LRO sessions per ring or disabled (0)");
+
+/* Priority pausing */
+MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
+			   " Per priority bit mask");
+MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
+			   " Per priority bit mask");
+
+static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
+{
+	struct mlx4_en_profile *params = &mdev->profile;
+	int i;
+
+	params->rss_xor = (rss_xor != 0);
+	params->rss_mask = rss_mask & 0x1f;
+	params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
+	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
+		params->prof[i].rx_pause = 1;
+		params->prof[i].rx_ppp = pfcrx;
+		params->prof[i].tx_pause = 1;
+		params->prof[i].tx_ppp = pfctx;
+		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
+		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
+		params->prof[i].tx_ring_num = MLX4_EN_NUM_TX_RINGS +
+			(!!pfcrx) * MLX4_EN_NUM_PPP_RINGS;
+	}
+
+	return 0;
+}
+
 static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
 			  enum mlx4_dev_event event, int port)
 {
@@ -194,28 +243,11 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 	/* Create a netdev for each port */
 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
 		mlx4_info(mdev, "Activating port:%d\n", i);
-		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) {
+		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
 			mdev->pndev[i] = NULL;
-			goto err_free_netdev;
-		}
 	}
 	return mdev;
 
-
-err_free_netdev:
-	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
-		if (mdev->pndev[i])
-			mlx4_en_destroy_netdev(mdev->pndev[i]);
-	}
-
-	mutex_lock(&mdev->state_lock);
-	mdev->device_up = false;
-	mutex_unlock(&mdev->state_lock);
-	flush_workqueue(mdev->workqueue);
-
-	/* Stop event queue before we drop down to release shared SW state */
-	destroy_workqueue(mdev->workqueue);
-
 err_mr:
 	mlx4_mr_free(dev, &mdev->mr);
 err_uar:
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 7bcc49de163..e02bafdd368 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -51,14 +51,14 @@ static void mlx4_en_vlan_rx_register(struct net_device *dev, struct vlan_group *
 	struct mlx4_en_dev *mdev = priv->mdev;
 	int err;
 
-	mlx4_dbg(HW, priv, "Registering VLAN group:%p\n", grp);
+	en_dbg(HW, priv, "Registering VLAN group:%p\n", grp);
 	priv->vlgrp = grp;
 
 	mutex_lock(&mdev->state_lock);
 	if (mdev->device_up && priv->port_up) {
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, grp);
 		if (err)
-			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+			en_err(priv, "Failed configuring VLAN filter\n");
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -72,15 +72,15 @@ static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 	if (!priv->vlgrp)
 		return;
 
-	mlx4_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n",
-		 vid, vlan_group_get_device(priv->vlgrp, vid));
+	en_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n",
+	       vid, vlan_group_get_device(priv->vlgrp, vid));
 
 	/* Add VID to port VLAN filter */
 	mutex_lock(&mdev->state_lock);
 	if (mdev->device_up && priv->port_up) {
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
 		if (err)
-			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+			en_err(priv, "Failed configuring VLAN filter\n");
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -94,9 +94,8 @@ static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 	if (!priv->vlgrp)
 		return;
 
-	mlx4_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp "
-		 "entry:%p)\n", vid, priv->vlgrp,
-		 vlan_group_get_device(priv->vlgrp, vid));
+	en_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp entry:%p)\n",
+	       vid, priv->vlgrp, vlan_group_get_device(priv->vlgrp, vid));
 	vlan_group_set_device(priv->vlgrp, vid, NULL);
 
 	/* Remove VID from port VLAN filter */
@@ -104,7 +103,7 @@ static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 	if (mdev->device_up && priv->port_up) {
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
 		if (err)
-			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+			en_err(priv, "Failed configuring VLAN filter\n");
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -150,9 +149,10 @@ static void mlx4_en_do_set_mac(struct work_struct *work)
 		err = mlx4_register_mac(mdev->dev, priv->port,
 					priv->mac, &priv->mac_index);
 		if (err)
-			mlx4_err(mdev, "Failed changing HW MAC address\n");
+			en_err(priv, "Failed changing HW MAC address\n");
 	} else
-		mlx4_dbg(HW, priv, "Port is down, exiting...\n");
+		en_dbg(HW, priv, "Port is down while "
+				 "registering mac, exiting...\n");
 
 	mutex_unlock(&mdev->state_lock);
 }
@@ -174,7 +174,6 @@ static void mlx4_en_clear_list(struct net_device *dev)
 static void mlx4_en_cache_mclist(struct net_device *dev)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct dev_mc_list *mclist;
 	struct dev_mc_list *tmp;
 	struct dev_mc_list *plist = NULL;
@@ -182,7 +181,7 @@ static void mlx4_en_cache_mclist(struct net_device *dev)
 	for (mclist = dev->mc_list; mclist; mclist = mclist->next) {
 		tmp = kmalloc(sizeof(struct dev_mc_list), GFP_ATOMIC);
 		if (!tmp) {
-			mlx4_err(mdev, "failed to allocate multicast list\n");
+			en_err(priv, "failed to allocate multicast list\n");
 			mlx4_en_clear_list(dev);
 			return;
 		}
@@ -219,13 +218,13 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 
 	mutex_lock(&mdev->state_lock);
 	if (!mdev->device_up) {
-		mlx4_dbg(HW, priv, "Card is not up, ignoring "
-				   "multicast change.\n");
+		en_dbg(HW, priv, "Card is not up, "
+				 "ignoring multicast change.\n");
 		goto out;
 	}
 	if (!priv->port_up) {
-		mlx4_dbg(HW, priv, "Port is down, ignoring "
-				   "multicast change.\n");
+		en_dbg(HW, priv, "Port is down, "
+				 "ignoring  multicast change.\n");
 		goto out;
 	}
 
@@ -236,29 +235,27 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 	if (dev->flags & IFF_PROMISC) {
 		if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) {
 			if (netif_msg_rx_status(priv))
-				mlx4_warn(mdev, "Port:%d entering promiscuous mode\n",
-					  priv->port);
+				en_warn(priv, "Entering promiscuous mode\n");
 			priv->flags |= MLX4_EN_FLAG_PROMISC;
 
 			/* Enable promiscouos mode */
 			err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port,
 						     priv->base_qpn, 1);
 			if (err)
-				mlx4_err(mdev, "Failed enabling "
-					 "promiscous mode\n");
+				en_err(priv, "Failed enabling "
+					     "promiscous mode\n");
 
 			/* Disable port multicast filter (unconditionally) */
 			err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 						  0, MLX4_MCAST_DISABLE);
 			if (err)
-				mlx4_err(mdev, "Failed disabling "
-					 "multicast filter\n");
+				en_err(priv, "Failed disabling "
+					     "multicast filter\n");
 
 			/* Disable port VLAN filter */
 			err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, NULL);
 			if (err)
-				mlx4_err(mdev, "Failed disabling "
-					 "VLAN filter\n");
+				en_err(priv, "Failed disabling VLAN filter\n");
 		}
 		goto out;
 	}
@@ -269,20 +266,19 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 
 	if (priv->flags & MLX4_EN_FLAG_PROMISC) {
 		if (netif_msg_rx_status(priv))
-			mlx4_warn(mdev, "Port:%d leaving promiscuous mode\n",
-				  priv->port);
+			en_warn(priv, "Leaving promiscuous mode\n");
 		priv->flags &= ~MLX4_EN_FLAG_PROMISC;
 
 		/* Disable promiscouos mode */
 		err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port,
 					     priv->base_qpn, 0);
 		if (err)
-			mlx4_err(mdev, "Failed disabling promiscous mode\n");
+			en_err(priv, "Failed disabling promiscous mode\n");
 
 		/* Enable port VLAN filter */
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
 		if (err)
-			mlx4_err(mdev, "Failed enabling VLAN filter\n");
+			en_err(priv, "Failed enabling VLAN filter\n");
 	}
 
 	/* Enable/disable the multicast filter according to IFF_ALLMULTI */
@@ -290,12 +286,12 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 					  0, MLX4_MCAST_DISABLE);
 		if (err)
-			mlx4_err(mdev, "Failed disabling multicast filter\n");
+			en_err(priv, "Failed disabling multicast filter\n");
 	} else {
 		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 					  0, MLX4_MCAST_DISABLE);
 		if (err)
-			mlx4_err(mdev, "Failed disabling multicast filter\n");
+			en_err(priv, "Failed disabling multicast filter\n");
 
 		/* Flush mcast filter and init it with broadcast address */
 		mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, ETH_BCAST,
@@ -314,7 +310,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 					  0, MLX4_MCAST_ENABLE);
 		if (err)
-			mlx4_err(mdev, "Failed enabling multicast filter\n");
+			en_err(priv, "Failed enabling multicast filter\n");
 
 		mlx4_en_clear_list(dev);
 	}
@@ -346,10 +342,10 @@ static void mlx4_en_tx_timeout(struct net_device *dev)
 	struct mlx4_en_dev *mdev = priv->mdev;
 
 	if (netif_msg_timer(priv))
-		mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port);
+		en_warn(priv, "Tx timeout called on port:%d\n", priv->port);
 
 	priv->port_stats.tx_timeout++;
-	mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
+	en_dbg(DRV, priv, "Scheduling watchdog\n");
 	queue_work(mdev->workqueue, &priv->watchdog_task);
 }
 
@@ -371,15 +367,15 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
 	int i;
 
 	/* If we haven't received a specific coalescing setting
-	 * (module param), we set the moderation paramters as follows:
+	 * (module param), we set the moderation parameters as follows:
 	 * - moder_cnt is set to the number of mtu sized packets to
 	 *   satisfy our coelsing target.
 	 * - moder_time is set to a fixed value.
 	 */
-	priv->rx_frames = MLX4_EN_RX_COAL_TARGET / priv->dev->mtu + 1;
+	priv->rx_frames = MLX4_EN_RX_COAL_TARGET;
 	priv->rx_usecs = MLX4_EN_RX_COAL_TIME;
-	mlx4_dbg(INTR, priv, "Default coalesing params for mtu:%d - "
-			     "rx_frames:%d rx_usecs:%d\n",
+	en_dbg(INTR, priv, "Default coalesing params for mtu:%d - "
+			   "rx_frames:%d rx_usecs:%d\n",
 		 priv->dev->mtu, priv->rx_frames, priv->rx_usecs);
 
 	/* Setup cq moderation params */
@@ -412,7 +408,6 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
 static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
 {
 	unsigned long period = (unsigned long) (jiffies - priv->last_moder_jiffies);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_cq *cq;
 	unsigned long packets;
 	unsigned long rate;
@@ -472,11 +467,11 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
 		moder_time = priv->rx_usecs;
 	}
 
-	mlx4_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n",
-		 tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period);
+	en_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n",
+	       tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period);
 
-	mlx4_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu "
-		 "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n",
+	en_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu "
+	       "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n",
 		 priv->last_moder_time, moder_time, period, packets,
 		 avg_pkt_size, rate);
 
@@ -487,8 +482,7 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
 			cq->moder_time = moder_time;
 			err = mlx4_en_set_cq_moder(priv, cq);
 			if (err) {
-				mlx4_err(mdev, "Failed modifying moderation for cq:%d "
-					 "on port:%d\n", i, priv->port);
+				en_err(priv, "Failed modifying moderation for cq:%d\n", i);
 				break;
 			}
 		}
@@ -511,8 +505,7 @@ static void mlx4_en_do_get_stats(struct work_struct *work)
 
 	err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0);
 	if (err)
-		mlx4_dbg(HW, priv, "Could not update stats for "
-				   "port:%d\n", priv->port);
+		en_dbg(HW, priv, "Could not update stats \n");
 
 	mutex_lock(&mdev->state_lock);
 	if (mdev->device_up) {
@@ -536,12 +529,10 @@ static void mlx4_en_linkstate(struct work_struct *work)
 	 * report to system log */
 	if (priv->last_link_state != linkstate) {
 		if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) {
-			if (netif_msg_link(priv))
-				mlx4_info(mdev, "Port %d - link down\n", priv->port);
+			en_dbg(LINK, priv, "Link Down\n");
 			netif_carrier_off(priv->dev);
 		} else {
-			if (netif_msg_link(priv))
-				mlx4_info(mdev, "Port %d - link up\n", priv->port);
+			en_dbg(LINK, priv, "Link Up\n");
 			netif_carrier_on(priv->dev);
 		}
 	}
@@ -556,58 +547,53 @@ int mlx4_en_start_port(struct net_device *dev)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_cq *cq;
 	struct mlx4_en_tx_ring *tx_ring;
-	struct mlx4_en_rx_ring *rx_ring;
 	int rx_index = 0;
 	int tx_index = 0;
-	u16 stride;
 	int err = 0;
 	int i;
 	int j;
 
 	if (priv->port_up) {
-		mlx4_dbg(DRV, priv, "start port called while port already up\n");
+		en_dbg(DRV, priv, "start port called while port already up\n");
 		return 0;
 	}
 
 	/* Calculate Rx buf size */
 	dev->mtu = min(dev->mtu, priv->max_mtu);
 	mlx4_en_calc_rx_buf(dev);
-	mlx4_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size);
-	stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) +
-				    DS_SIZE * priv->num_frags);
+	en_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size);
+
 	/* Configure rx cq's and rings */
+	err = mlx4_en_activate_rx_rings(priv);
+	if (err) {
+		en_err(priv, "Failed to activate RX rings\n");
+		return err;
+	}
 	for (i = 0; i < priv->rx_ring_num; i++) {
 		cq = &priv->rx_cq[i];
-		rx_ring = &priv->rx_ring[i];
 
 		err = mlx4_en_activate_cq(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed activating Rx CQ\n");
+			en_err(priv, "Failed activating Rx CQ\n");
 			goto cq_err;
 		}
 		for (j = 0; j < cq->size; j++)
 			cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK;
 		err = mlx4_en_set_cq_moder(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed setting cq moderation parameters");
+			en_err(priv, "Failed setting cq moderation parameters");
 			mlx4_en_deactivate_cq(priv, cq);
 			goto cq_err;
 		}
 		mlx4_en_arm_cq(priv, cq);
-
+		priv->rx_ring[i].cqn = cq->mcq.cqn;
 		++rx_index;
 	}
 
-	err = mlx4_en_activate_rx_rings(priv);
-	if (err) {
-		mlx4_err(mdev, "Failed to activate RX rings\n");
-		goto cq_err;
-	}
-
 	err = mlx4_en_config_rss_steer(priv);
 	if (err) {
-		mlx4_err(mdev, "Failed configuring rss steering\n");
-		goto rx_err;
+		en_err(priv, "Failed configuring rss steering\n");
+		goto cq_err;
 	}
 
 	/* Configure tx cq's and rings */
@@ -616,16 +602,16 @@ int mlx4_en_start_port(struct net_device *dev)
 		cq = &priv->tx_cq[i];
 		err = mlx4_en_activate_cq(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed allocating Tx CQ\n");
+			en_err(priv, "Failed allocating Tx CQ\n");
 			goto tx_err;
 		}
 		err = mlx4_en_set_cq_moder(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed setting cq moderation parameters");
+			en_err(priv, "Failed setting cq moderation parameters");
 			mlx4_en_deactivate_cq(priv, cq);
 			goto tx_err;
 		}
-		mlx4_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i);
+		en_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i);
 		cq->buf->wqe_index = cpu_to_be16(0xffff);
 
 		/* Configure ring */
@@ -633,7 +619,7 @@ int mlx4_en_start_port(struct net_device *dev)
 		err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn,
 					       priv->rx_ring[0].srq.srqn);
 		if (err) {
-			mlx4_err(mdev, "Failed allocating Tx ring\n");
+			en_err(priv, "Failed allocating Tx ring\n");
 			mlx4_en_deactivate_cq(priv, cq);
 			goto tx_err;
 		}
@@ -651,30 +637,30 @@ int mlx4_en_start_port(struct net_device *dev)
 				    priv->prof->rx_pause,
 				    priv->prof->rx_ppp);
 	if (err) {
-		mlx4_err(mdev, "Failed setting port general configurations"
-			       " for port %d, with error %d\n", priv->port, err);
+		en_err(priv, "Failed setting port general configurations "
+			     "for port %d, with error %d\n", priv->port, err);
 		goto tx_err;
 	}
 	/* Set default qp number */
 	err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, priv->base_qpn, 0);
 	if (err) {
-		mlx4_err(mdev, "Failed setting default qp numbers\n");
+		en_err(priv, "Failed setting default qp numbers\n");
 		goto tx_err;
 	}
 	/* Set port mac number */
-	mlx4_dbg(DRV, priv, "Setting mac for port %d\n", priv->port);
+	en_dbg(DRV, priv, "Setting mac for port %d\n", priv->port);
 	err = mlx4_register_mac(mdev->dev, priv->port,
 				priv->mac, &priv->mac_index);
 	if (err) {
-		mlx4_err(mdev, "Failed setting port mac\n");
+		en_err(priv, "Failed setting port mac\n");
 		goto tx_err;
 	}
 
 	/* Init port */
-	mlx4_dbg(HW, priv, "Initializing port\n");
+	en_dbg(HW, priv, "Initializing port\n");
 	err = mlx4_INIT_PORT(mdev->dev, priv->port);
 	if (err) {
-		mlx4_err(mdev, "Failed Initializing port\n");
+		en_err(priv, "Failed Initializing port\n");
 		goto mac_err;
 	}
 
@@ -694,12 +680,11 @@ tx_err:
 	}
 
 	mlx4_en_release_rss_steer(priv);
-rx_err:
-	for (i = 0; i < priv->rx_ring_num; i++)
-		mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
 cq_err:
 	while (rx_index--)
 		mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]);
+	for (i = 0; i < priv->rx_ring_num; i++)
+		mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
 
 	return err; /* need to close devices */
 }
@@ -712,8 +697,7 @@ void mlx4_en_stop_port(struct net_device *dev)
 	int i;
 
 	if (!priv->port_up) {
-		mlx4_dbg(DRV, priv, "stop port (%d) called while port already down\n",
-			 priv->port);
+		en_dbg(DRV, priv, "stop port called while port already down\n");
 		return;
 	}
 	netif_stop_queue(dev);
@@ -758,13 +742,13 @@ static void mlx4_en_restart(struct work_struct *work)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct net_device *dev = priv->dev;
 
-	mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
+	en_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
 
 	mutex_lock(&mdev->state_lock);
 	if (priv->port_up) {
 		mlx4_en_stop_port(dev);
 		if (mlx4_en_start_port(dev))
-			mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+			en_err(priv, "Failed restarting port %d\n", priv->port);
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -780,14 +764,14 @@ static int mlx4_en_open(struct net_device *dev)
 	mutex_lock(&mdev->state_lock);
 
 	if (!mdev->device_up) {
-		mlx4_err(mdev, "Cannot open - device down/disabled\n");
+		en_err(priv, "Cannot open - device down/disabled\n");
 		err = -EBUSY;
 		goto out;
 	}
 
 	/* Reset HW statistics and performance counters */
 	if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1))
-		mlx4_dbg(HW, priv, "Failed dumping statistics\n");
+		en_dbg(HW, priv, "Failed dumping statistics\n");
 
 	memset(&priv->stats, 0, sizeof(priv->stats));
 	memset(&priv->pstats, 0, sizeof(priv->pstats));
@@ -804,7 +788,7 @@ static int mlx4_en_open(struct net_device *dev)
 	mlx4_en_set_default_moderation(priv);
 	err = mlx4_en_start_port(dev);
 	if (err)
-		mlx4_err(mdev, "Failed starting port:%d\n", priv->port);
+		en_err(priv, "Failed starting port:%d\n", priv->port);
 
 out:
 	mutex_unlock(&mdev->state_lock);
@@ -817,8 +801,7 @@ static int mlx4_en_close(struct net_device *dev)
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_en_dev *mdev = priv->mdev;
 
-	if (netif_msg_ifdown(priv))
-		mlx4_info(mdev, "Close called for port:%d\n", priv->port);
+	en_dbg(IFDOWN, priv, "Close port called\n");
 
 	mutex_lock(&mdev->state_lock);
 
@@ -850,7 +833,6 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv)
 
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 {
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_port_profile *prof = priv->prof;
 	int i;
 
@@ -879,7 +861,7 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 	return 0;
 
 err:
-	mlx4_err(mdev, "Failed to allocate NIC resources\n");
+	en_err(priv, "Failed to allocate NIC resources\n");
 	return -ENOMEM;
 }
 
@@ -889,7 +871,7 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_en_dev *mdev = priv->mdev;
 
-	mlx4_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port);
+	en_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port);
 
 	/* Unregister device - this will close the port if it was up */
 	if (priv->registered)
@@ -918,11 +900,11 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	int err = 0;
 
-	mlx4_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n",
+	en_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n",
 		 dev->mtu, new_mtu);
 
 	if ((new_mtu < MLX4_EN_MIN_MTU) || (new_mtu > priv->max_mtu)) {
-		mlx4_err(mdev, "Bad MTU size:%d.\n", new_mtu);
+		en_err(priv, "Bad MTU size:%d.\n", new_mtu);
 		return -EPERM;
 	}
 	dev->mtu = new_mtu;
@@ -932,13 +914,13 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
 		if (!mdev->device_up) {
 			/* NIC is probably restarting - let watchdog task reset
 			 * the port */
-			mlx4_dbg(DRV, priv, "Change MTU called with card down!?\n");
+			en_dbg(DRV, priv, "Change MTU called with card down!?\n");
 		} else {
 			mlx4_en_stop_port(dev);
 			mlx4_en_set_default_moderation(priv);
 			err = mlx4_en_start_port(dev);
 			if (err) {
-				mlx4_err(mdev, "Failed restarting port:%d\n",
+				en_err(priv, "Failed restarting port:%d\n",
 					 priv->port);
 				queue_work(mdev->workqueue, &priv->watchdog_task);
 			}
@@ -952,6 +934,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_open		= mlx4_en_open,
 	.ndo_stop		= mlx4_en_close,
 	.ndo_start_xmit		= mlx4_en_xmit,
+	.ndo_select_queue	= mlx4_en_select_queue,
 	.ndo_get_stats		= mlx4_en_get_stats,
 	.ndo_set_multicast_list	= mlx4_en_set_multicast,
 	.ndo_set_mac_address	= mlx4_en_set_mac,
@@ -974,7 +957,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	int i;
 	int err;
 
-	dev = alloc_etherdev(sizeof(struct mlx4_en_priv));
+	dev = alloc_etherdev_mq(sizeof(struct mlx4_en_priv), prof->tx_ring_num);
 	if (dev == NULL) {
 		mlx4_err(mdev, "Net device allocation failed\n");
 		return -ENOMEM;
@@ -1012,7 +995,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port];
 	priv->mac = mdev->dev->caps.def_mac[priv->port];
 	if (ILLEGAL_MAC(priv->mac)) {
-		mlx4_err(mdev, "Port: %d, invalid mac burned: 0x%llx, quiting\n",
+		en_err(priv, "Port: %d, invalid mac burned: 0x%llx, quiting\n",
 			 priv->port, priv->mac);
 		err = -EINVAL;
 		goto out;
@@ -1031,19 +1014,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	err = mlx4_alloc_hwq_res(mdev->dev, &priv->res,
 				MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE);
 	if (err) {
-		mlx4_err(mdev, "Failed to allocate page for rx qps\n");
+		en_err(priv, "Failed to allocate page for rx qps\n");
 		goto out;
 	}
 	priv->allocated = 1;
 
-	/* Populate Tx priority mappings */
-	mlx4_en_set_prio_map(priv, priv->tx_prio_map, prof->tx_ring_num);
-
 	/*
 	 * Initialize netdev entry points
 	 */
 	dev->netdev_ops = &mlx4_netdev_ops;
 	dev->watchdog_timeo = MLX4_EN_WATCHDOG_TIMEOUT;
+	dev->real_num_tx_queues = MLX4_EN_NUM_TX_RINGS;
 
 	SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops);
 
@@ -1057,7 +1038,9 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	 * Set driver features
 	 */
 	dev->features |= NETIF_F_SG;
+	dev->vlan_features |= NETIF_F_SG;
 	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_HW_VLAN_TX |
 			 NETIF_F_HW_VLAN_RX |
@@ -1067,6 +1050,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	if (mdev->LSO_support) {
 		dev->features |= NETIF_F_TSO;
 		dev->features |= NETIF_F_TSO6;
+		dev->vlan_features |= NETIF_F_TSO;
+		dev->vlan_features |= NETIF_F_TSO6;
 	}
 
 	mdev->pndev[port] = dev;
@@ -1074,9 +1059,13 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	netif_carrier_off(dev);
 	err = register_netdev(dev);
 	if (err) {
-		mlx4_err(mdev, "Netdev registration failed\n");
+		en_err(priv, "Netdev registration failed for port %d\n", port);
 		goto out;
 	}
+
+	en_warn(priv, "Using %d TX rings\n", prof->tx_ring_num);
+	en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
+
 	priv->registered = 1;
 	queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
 	return 0;
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 9ee873e872b..5a14899c1e2 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -114,8 +114,8 @@ static int mlx4_en_init_allocator(struct mlx4_en_priv *priv,
 			goto out;
 
 		page_alloc->offset = priv->frag_info[i].frag_align;
-		mlx4_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n",
-			 i, page_alloc->page);
+		en_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n",
+		       i, page_alloc->page);
 	}
 	return 0;
 
@@ -136,8 +136,8 @@ static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv,
 
 	for (i = 0; i < priv->num_frags; i++) {
 		page_alloc = &ring->page_alloc[i];
-		mlx4_dbg(DRV, priv, "Freeing allocator:%d count:%d\n",
-			 i, page_count(page_alloc->page));
+		en_dbg(DRV, priv, "Freeing allocator:%d count:%d\n",
+		       i, page_count(page_alloc->page));
 
 		put_page(page_alloc->page);
 		page_alloc->page = NULL;
@@ -202,12 +202,34 @@ static inline void mlx4_en_update_rx_prod_db(struct mlx4_en_rx_ring *ring)
 	*ring->wqres.db.db = cpu_to_be32(ring->prod & 0xffff);
 }
 
-static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
+static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv,
+				 struct mlx4_en_rx_ring *ring,
+				 int index)
 {
 	struct mlx4_en_dev *mdev = priv->mdev;
+	struct skb_frag_struct *skb_frags;
+	struct mlx4_en_rx_desc *rx_desc = ring->buf + (index << ring->log_stride);
+	dma_addr_t dma;
+	int nr;
+
+	skb_frags = ring->rx_info + (index << priv->log_rx_info);
+	for (nr = 0; nr < priv->num_frags; nr++) {
+		en_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
+		dma = be64_to_cpu(rx_desc->data[nr].addr);
+
+		en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+		pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
+				 PCI_DMA_FROMDEVICE);
+		put_page(skb_frags[nr].page);
+	}
+}
+
+static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
+{
 	struct mlx4_en_rx_ring *ring;
 	int ring_ind;
 	int buf_ind;
+	int new_size;
 
 	for (buf_ind = 0; buf_ind < priv->prof->rx_ring_size; buf_ind++) {
 		for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
@@ -216,22 +238,34 @@ static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
 			if (mlx4_en_prepare_rx_desc(priv, ring,
 						    ring->actual_size)) {
 				if (ring->actual_size < MLX4_EN_MIN_RX_SIZE) {
-					mlx4_err(mdev, "Failed to allocate "
-						       "enough rx buffers\n");
+					en_err(priv, "Failed to allocate "
+						     "enough rx buffers\n");
 					return -ENOMEM;
 				} else {
-					if (netif_msg_rx_err(priv))
-						mlx4_warn(mdev,
-							  "Only %d buffers allocated\n",
-							  ring->actual_size);
-					goto out;
+					new_size = rounddown_pow_of_two(ring->actual_size);
+					en_warn(priv, "Only %d buffers allocated "
+						      "reducing ring size to %d",
+						ring->actual_size, new_size);
+					goto reduce_rings;
 				}
 			}
 			ring->actual_size++;
 			ring->prod++;
 		}
 	}
-out:
+	return 0;
+
+reduce_rings:
+	for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
+		ring = &priv->rx_ring[ring_ind];
+		while (ring->actual_size > new_size) {
+			ring->actual_size--;
+			ring->prod--;
+			mlx4_en_free_rx_desc(priv, ring, ring->actual_size);
+		}
+		ring->size_mask = ring->actual_size - 1;
+	}
+
 	return 0;
 }
 
@@ -247,15 +281,14 @@ static int mlx4_en_fill_rx_buf(struct net_device *dev,
 					      ring->size_mask);
 		if (err) {
 			if (netif_msg_rx_err(priv))
-				mlx4_warn(priv->mdev,
-					  "Failed preparing rx descriptor\n");
+				en_warn(priv, "Failed preparing rx descriptor\n");
 			priv->port_stats.rx_alloc_failed++;
 			break;
 		}
 		++num;
 		++ring->prod;
 	}
-	if ((u32) (ring->prod - ring->cons) == ring->size)
+	if ((u32) (ring->prod - ring->cons) == ring->actual_size)
 		ring->full = 1;
 
 	return num;
@@ -264,33 +297,17 @@ static int mlx4_en_fill_rx_buf(struct net_device *dev,
 static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
 				struct mlx4_en_rx_ring *ring)
 {
-	struct mlx4_en_dev *mdev = priv->mdev;
-	struct skb_frag_struct *skb_frags;
-	struct mlx4_en_rx_desc *rx_desc;
-	dma_addr_t dma;
 	int index;
-	int nr;
 
-	mlx4_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n",
-			ring->cons, ring->prod);
+	en_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n",
+	       ring->cons, ring->prod);
 
 	/* Unmap and free Rx buffers */
-	BUG_ON((u32) (ring->prod - ring->cons) > ring->size);
+	BUG_ON((u32) (ring->prod - ring->cons) > ring->actual_size);
 	while (ring->cons != ring->prod) {
 		index = ring->cons & ring->size_mask;
-		rx_desc = ring->buf + (index << ring->log_stride);
-		skb_frags = ring->rx_info + (index << priv->log_rx_info);
-		mlx4_dbg(DRV, priv, "Processing descriptor:%d\n", index);
-
-		for (nr = 0; nr < priv->num_frags; nr++) {
-			mlx4_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
-			dma = be64_to_cpu(rx_desc->data[nr].addr);
-
-			mlx4_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
-			pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
-					 PCI_DMA_FROMDEVICE);
-			put_page(skb_frags[nr].page);
-		}
+		en_dbg(DRV, priv, "Processing descriptor:%d\n", index);
+		mlx4_en_free_rx_desc(priv, ring, index);
 		++ring->cons;
 	}
 }
@@ -354,10 +371,10 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 					sizeof(struct skb_frag_struct));
 	ring->rx_info = vmalloc(tmp);
 	if (!ring->rx_info) {
-		mlx4_err(mdev, "Failed allocating rx_info ring\n");
+		en_err(priv, "Failed allocating rx_info ring\n");
 		return -ENOMEM;
 	}
-	mlx4_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n",
+	en_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n",
 		 ring->rx_info, tmp);
 
 	err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres,
@@ -367,7 +384,7 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 
 	err = mlx4_en_map_buffer(&ring->wqres.buf);
 	if (err) {
-		mlx4_err(mdev, "Failed to map RX buffer\n");
+		en_err(priv, "Failed to map RX buffer\n");
 		goto err_hwq;
 	}
 	ring->buf = ring->wqres.buf.direct.buf;
@@ -385,7 +402,7 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 				    sizeof(struct net_lro_desc),
 				    GFP_KERNEL);
 	if (!ring->lro.lro_arr) {
-		mlx4_err(mdev, "Failed to allocate lro array\n");
+		en_err(priv, "Failed to allocate lro array\n");
 		goto err_map;
 	}
 	ring->lro.get_frag_header = mlx4_en_get_frag_header;
@@ -436,7 +453,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		/* Initialize page allocators */
 		err = mlx4_en_init_allocator(priv, ring);
 		if (err) {
-			mlx4_err(mdev, "Failed initializing ring allocator\n");
+			en_err(priv, "Failed initializing ring allocator\n");
 			ring_ind--;
 			goto err_allocator;
 		}
@@ -454,7 +471,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		mlx4_en_update_rx_prod_db(ring);
 
 		/* Configure SRQ representing the ring */
-		ring->srq.max    = ring->size;
+		ring->srq.max    = ring->actual_size;
 		ring->srq.max_gs = max_gs;
 		ring->srq.wqe_shift = ilog2(ring->stride);
 
@@ -467,7 +484,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		err = mlx4_srq_alloc(mdev->dev, mdev->priv_pdn, &ring->wqres.mtt,
 				     ring->wqres.db.dma, &ring->srq);
 		if (err){
-			mlx4_err(mdev, "Failed to allocate srq\n");
+			en_err(priv, "Failed to allocate srq\n");
 			ring_ind--;
 			goto err_srq;
 		}
@@ -582,7 +599,7 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv,
 
 	skb = dev_alloc_skb(SMALL_PACKET_SIZE + NET_IP_ALIGN);
 	if (!skb) {
-		mlx4_dbg(RX_ERR, priv, "Failed allocating skb\n");
+		en_dbg(RX_ERR, priv, "Failed allocating skb\n");
 		return NULL;
 	}
 	skb->dev = priv->dev;
@@ -661,7 +678,6 @@ static void mlx4_en_copy_desc(struct mlx4_en_priv *priv,
 int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_cqe *cqe;
 	struct mlx4_en_rx_ring *ring = &priv->rx_ring[cq->ring];
 	struct skb_frag_struct *skb_frags;
@@ -698,14 +714,14 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 		/* Drop packet on bad receive or bad checksum */
 		if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) ==
 						MLX4_CQE_OPCODE_ERROR)) {
-			mlx4_err(mdev, "CQE completed in error - vendor "
+			en_err(priv, "CQE completed in error - vendor "
 				  "syndrom:%d syndrom:%d\n",
 				  ((struct mlx4_err_cqe *) cqe)->vendor_err_syndrome,
 				  ((struct mlx4_err_cqe *) cqe)->syndrome);
 			goto next;
 		}
 		if (unlikely(cqe->badfcs_enc & MLX4_CQE_BAD_FCS)) {
-			mlx4_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n");
+			en_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n");
 			goto next;
 		}
 
@@ -855,7 +871,7 @@ static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16
 	u16 res = MLX4_EN_ALLOC_SIZE % stride;
 	u16 offset = MLX4_EN_ALLOC_SIZE - stride - res + align;
 
-	mlx4_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d "
+	en_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d "
 			    "res:%d offset:%d\n", stride, align, res, offset);
 	return offset;
 }
@@ -900,10 +916,10 @@ void mlx4_en_calc_rx_buf(struct net_device *dev)
 	priv->rx_skb_size = eff_mtu;
 	priv->log_rx_info = ROUNDUP_LOG2(i * sizeof(struct skb_frag_struct));
 
-	mlx4_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d "
+	en_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d "
 		  "num_frags:%d):\n", eff_mtu, priv->num_frags);
 	for (i = 0; i < priv->num_frags; i++) {
-		mlx4_dbg(DRV, priv, "  frag:%d - size:%d prefix:%d align:%d "
+		en_dbg(DRV, priv, "  frag:%d - size:%d prefix:%d align:%d "
 				"stride:%d last_offset:%d\n", i,
 				priv->frag_info[i].frag_size,
 				priv->frag_info[i].frag_prefix_size,
@@ -923,12 +939,12 @@ void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
 	int i;
 
 	rss_map->size = roundup_pow_of_two(num_entries);
-	mlx4_dbg(DRV, priv, "Setting default RSS map of %d entires\n",
-		 rss_map->size);
+	en_dbg(DRV, priv, "Setting default RSS map of %d entires\n",
+	       rss_map->size);
 
 	for (i = 0; i < rss_map->size; i++) {
 		rss_map->map[i] = i % num_rings;
-		mlx4_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]);
+		en_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]);
 	}
 }
 
@@ -943,13 +959,13 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
 
 	context = kmalloc(sizeof *context , GFP_KERNEL);
 	if (!context) {
-		mlx4_err(mdev, "Failed to allocate qp context\n");
+		en_err(priv, "Failed to allocate qp context\n");
 		return -ENOMEM;
 	}
 
 	err = mlx4_qp_alloc(mdev->dev, qpn, qp);
 	if (err) {
-		mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
+		en_err(priv, "Failed to allocate qp #%x\n", qpn);
 		goto out;
 	}
 	qp->event = mlx4_en_sqp_event;
@@ -981,12 +997,11 @@ int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv)
 	int err = 0;
 	int good_qps = 0;
 
-	mlx4_dbg(DRV, priv, "Configuring rss steering for port %u\n", priv->port);
+	en_dbg(DRV, priv, "Configuring rss steering\n");
 	err = mlx4_qp_reserve_range(mdev->dev, rss_map->size,
 				    rss_map->size, &rss_map->base_qpn);
 	if (err) {
-		mlx4_err(mdev, "Failed reserving %d qps for port %u\n",
-			 rss_map->size, priv->port);
+		en_err(priv, "Failed reserving %d qps\n", rss_map->size);
 		return err;
 	}
 
@@ -1006,13 +1021,13 @@ int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv)
 	/* Configure RSS indirection qp */
 	err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &priv->base_qpn);
 	if (err) {
-		mlx4_err(mdev, "Failed to reserve range for RSS "
-			       "indirection qp\n");
+		en_err(priv, "Failed to reserve range for RSS "
+			     "indirection qp\n");
 		goto rss_err;
 	}
 	err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, &rss_map->indir_qp);
 	if (err) {
-		mlx4_err(mdev, "Failed to allocate RSS indirection QP\n");
+		en_err(priv, "Failed to allocate RSS indirection QP\n");
 		goto reserve_err;
 	}
 	rss_map->indir_qp.event = mlx4_en_sqp_event;
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index e5c98a98ad3..5dc7466ad03 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -68,15 +68,15 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 	tmp = size * sizeof(struct mlx4_en_tx_info);
 	ring->tx_info = vmalloc(tmp);
 	if (!ring->tx_info) {
-		mlx4_err(mdev, "Failed allocating tx_info ring\n");
+		en_err(priv, "Failed allocating tx_info ring\n");
 		return -ENOMEM;
 	}
-	mlx4_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n",
+	en_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n",
 		 ring->tx_info, tmp);
 
 	ring->bounce_buf = kmalloc(MAX_DESC_SIZE, GFP_KERNEL);
 	if (!ring->bounce_buf) {
-		mlx4_err(mdev, "Failed allocating bounce buffer\n");
+		en_err(priv, "Failed allocating bounce buffer\n");
 		err = -ENOMEM;
 		goto err_tx;
 	}
@@ -85,31 +85,31 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 	err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, ring->buf_size,
 				 2 * PAGE_SIZE);
 	if (err) {
-		mlx4_err(mdev, "Failed allocating hwq resources\n");
+		en_err(priv, "Failed allocating hwq resources\n");
 		goto err_bounce;
 	}
 
 	err = mlx4_en_map_buffer(&ring->wqres.buf);
 	if (err) {
-		mlx4_err(mdev, "Failed to map TX buffer\n");
+		en_err(priv, "Failed to map TX buffer\n");
 		goto err_hwq_res;
 	}
 
 	ring->buf = ring->wqres.buf.direct.buf;
 
-	mlx4_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d "
-		 "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size,
-		 ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map);
+	en_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d "
+	       "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size,
+	       ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map);
 
 	err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &ring->qpn);
 	if (err) {
-		mlx4_err(mdev, "Failed reserving qp for tx ring.\n");
+		en_err(priv, "Failed reserving qp for tx ring.\n");
 		goto err_map;
 	}
 
 	err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->qp);
 	if (err) {
-		mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn);
+		en_err(priv, "Failed allocating qp %d\n", ring->qpn);
 		goto err_reserve;
 	}
 	ring->qp.event = mlx4_en_sqp_event;
@@ -135,7 +135,7 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv,
 			     struct mlx4_en_tx_ring *ring)
 {
 	struct mlx4_en_dev *mdev = priv->mdev;
-	mlx4_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn);
+	en_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn);
 
 	mlx4_qp_remove(mdev->dev, &ring->qp);
 	mlx4_qp_free(mdev->dev, &ring->qp);
@@ -274,12 +274,12 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring)
 
 	/* Skip last polled descriptor */
 	ring->cons += ring->last_nr_txbb;
-	mlx4_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n",
+	en_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n",
 		 ring->cons, ring->prod);
 
 	if ((u32) (ring->prod - ring->cons) > ring->size) {
 		if (netif_msg_tx_err(priv))
-			mlx4_warn(priv->mdev, "Tx consumer passed producer!\n");
+			en_warn(priv, "Tx consumer passed producer!\n");
 		return 0;
 	}
 
@@ -292,39 +292,11 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring)
 	}
 
 	if (cnt)
-		mlx4_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt);
+		en_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt);
 
 	return cnt;
 }
 
-void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num)
-{
-	int block = 8 / ring_num;
-	int extra = 8 - (block * ring_num);
-	int num = 0;
-	u16 ring = 1;
-	int prio;
-
-	if (ring_num == 1) {
-		for (prio = 0; prio < 8; prio++)
-			prio_map[prio] = 0;
-		return;
-	}
-
-	for (prio = 0; prio < 8; prio++) {
-		if (extra && (num == block + 1)) {
-			ring++;
-			num = 0;
-			extra--;
-		} else if (!extra && (num == block)) {
-			ring++;
-			num = 0;
-		}
-		prio_map[prio] = ring;
-		mlx4_dbg(DRV, priv, " prio:%d --> ring:%d\n", prio, ring);
-		num++;
-	}
-}
 
 static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq)
 {
@@ -386,18 +358,8 @@ static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq)
 	if (unlikely(ring->blocked)) {
 		if ((u32) (ring->prod - ring->cons) <=
 		     ring->size - HEADROOM - MAX_DESC_TXBBS) {
-
-			/* TODO: support multiqueue netdevs. Currently, we block
-			 * when *any* ring is full. Note that:
-			 * - 2 Tx rings can unblock at the same time and call
-			 *   netif_wake_queue(), which is OK since this
-			 *   operation is idempotent.
-			 * - We might wake the queue just after another ring
-			 *   stopped it. This is no big deal because the next
-			 *   transmission on that ring would stop the queue.
-			 */
 			ring->blocked = 0;
-			netif_wake_queue(dev);
+			netif_tx_wake_queue(netdev_get_tx_queue(dev, cq->ring));
 			priv->port_stats.wake_queue++;
 		}
 	}
@@ -539,7 +501,6 @@ static int get_real_size(struct sk_buff *skb, struct net_device *dev,
 			 int *lso_header_size)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	int real_size;
 
 	if (skb_is_gso(skb)) {
@@ -553,14 +514,14 @@ static int get_real_size(struct sk_buff *skb, struct net_device *dev,
 				real_size += DS_SIZE;
 			else {
 				if (netif_msg_tx_err(priv))
-					mlx4_warn(mdev, "Non-linear headers\n");
+					en_warn(priv, "Non-linear headers\n");
 				dev_kfree_skb_any(skb);
 				return 0;
 			}
 		}
 		if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) {
 			if (netif_msg_tx_err(priv))
-				mlx4_warn(mdev, "LSO header size too big\n");
+				en_warn(priv, "LSO header size too big\n");
 			dev_kfree_skb_any(skb);
 			return 0;
 		}
@@ -617,21 +578,20 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
 	tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f;
 }
 
-static int get_vlan_info(struct mlx4_en_priv *priv, struct sk_buff *skb,
-			 u16 *vlan_tag)
+u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
-	int tx_ind;
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	u16 vlan_tag = 0;
 
-	/* Obtain VLAN information if present */
-	if (priv->vlgrp && vlan_tx_tag_present(skb)) {
-		*vlan_tag = vlan_tx_tag_get(skb);
-		/* Set the Tx ring to use according to vlan priority */
-		tx_ind = priv->tx_prio_map[*vlan_tag >> 13];
-	} else {
-		*vlan_tag = 0;
-		tx_ind = 0;
+	/* If we support per priority flow control and the packet contains
+	 * a vlan tag, send the packet to the TX ring assigned to that priority
+	 */
+	if (priv->prof->rx_ppp && priv->vlgrp && vlan_tx_tag_present(skb)) {
+		vlan_tag = vlan_tx_tag_get(skb);
+		return MLX4_EN_NUM_TX_RINGS + (vlan_tag >> 13);
 	}
-	return tx_ind;
+
+	return skb_tx_hash(dev, skb);
 }
 
 int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -651,7 +611,7 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	dma_addr_t dma;
 	u32 index;
 	__be32 op_own;
-	u16 vlan_tag;
+	u16 vlan_tag = 0;
 	int i;
 	int lso_header_size;
 	void *fragptr;
@@ -669,20 +629,21 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	nr_txbb = desc_size / TXBB_SIZE;
 	if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
 		if (netif_msg_tx_err(priv))
-			mlx4_warn(mdev, "Oversized header or SG list\n");
+			en_warn(priv, "Oversized header or SG list\n");
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-	tx_ind = get_vlan_info(priv, skb, &vlan_tag);
+	tx_ind = skb->queue_mapping;
 	ring = &priv->tx_ring[tx_ind];
+	if (priv->vlgrp && vlan_tx_tag_present(skb))
+		vlan_tag = vlan_tx_tag_get(skb);
 
 	/* Check available TXBBs And 2K spare for prefetch */
 	if (unlikely(((int)(ring->prod - ring->cons)) >
 		     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
-		/* every full Tx ring stops queue.
-		 * TODO: implement multi-queue support (per-queue stop) */
-		netif_stop_queue(dev);
+		/* every full Tx ring stops queue */
+		netif_tx_stop_queue(netdev_get_tx_queue(dev, tx_ind));
 		ring->blocked = 1;
 		priv->port_stats.queue_stopped++;
 
@@ -695,7 +656,7 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Now that we know what Tx ring to use */
 	if (unlikely(!priv->port_up)) {
 		if (netif_msg_tx_err(priv))
-			mlx4_warn(mdev, "xmit: port down!\n");
+			en_warn(priv, "xmit: port down!\n");
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
@@ -819,7 +780,6 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Ring doorbell! */
 	wmb();
 	writel(ring->doorbell_qpn, mdev->uar_map + MLX4_SEND_DOORBELL);
-	dev->trans_start = jiffies;
 
 	/* Poll CQ here */
 	mlx4_en_xmit_poll(priv, tx_ind);
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index 8830dcb92ec..b9ceddde46c 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -497,8 +497,10 @@ static void mlx4_free_irqs(struct mlx4_dev *dev)
 	if (eq_table->have_irq)
 		free_irq(dev->pdev->irq, dev);
 	for (i = 0; i < dev->caps.num_comp_vectors + 1; ++i)
-		if (eq_table->eq[i].have_irq)
+		if (eq_table->eq[i].have_irq) {
 			free_irq(eq_table->eq[i].irq, eq_table->eq + i);
+			eq_table->eq[i].have_irq = 0;
+		}
 
 	kfree(eq_table->irq_names);
 }
@@ -623,8 +625,10 @@ int mlx4_init_eq_table(struct mlx4_dev *dev)
 		err = mlx4_create_eq(dev, dev->caps.num_cqs + MLX4_NUM_SPARE_EQE,
 				     (dev->flags & MLX4_FLAG_MSI_X) ? i : 0,
 				     &priv->eq_table.eq[i]);
-		if (err)
+		if (err) {
+			--i;
 			goto err_out_unmap;
+		}
 	}
 
 	err = mlx4_create_eq(dev, MLX4_NUM_ASYNC_EQE + MLX4_NUM_SPARE_EQE,
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 30bea968969..018348c0119 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -100,6 +100,10 @@ module_param_named(use_prio, use_prio, bool, 0444);
 MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
 		  "(0/1, default 0)");
 
+static int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG);
+module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
+MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)");
+
 int mlx4_check_port_params(struct mlx4_dev *dev,
 			   enum mlx4_port_type *port_type)
 {
@@ -203,12 +207,13 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	dev->caps.max_cqes	     = dev_cap->max_cq_sz - 1;
 	dev->caps.reserved_cqs	     = dev_cap->reserved_cqs;
 	dev->caps.reserved_eqs	     = dev_cap->reserved_eqs;
+	dev->caps.mtts_per_seg	     = 1 << log_mtts_per_seg;
 	dev->caps.reserved_mtts	     = DIV_ROUND_UP(dev_cap->reserved_mtts,
-						    MLX4_MTT_ENTRY_PER_SEG);
+						    dev->caps.mtts_per_seg);
 	dev->caps.reserved_mrws	     = dev_cap->reserved_mrws;
 	dev->caps.reserved_uars	     = dev_cap->reserved_uars;
 	dev->caps.reserved_pds	     = dev_cap->reserved_pds;
-	dev->caps.mtt_entry_sz	     = MLX4_MTT_ENTRY_PER_SEG * dev_cap->mtt_entry_sz;
+	dev->caps.mtt_entry_sz	     = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz;
 	dev->caps.max_msg_sz         = dev_cap->max_msg_sz;
 	dev->caps.page_size_cap	     = ~(u32) (dev_cap->min_page_sz - 1);
 	dev->caps.flags		     = dev_cap->flags;
@@ -1304,6 +1309,11 @@ static int __init mlx4_verify_params(void)
 		return -1;
 	}
 
+	if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) {
+		printk(KERN_WARNING "mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg);
+		return -1;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index ef840abbcd3..d43a9e4c2ae 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -49,26 +49,42 @@
 #include "en_port.h"
 
 #define DRV_NAME	"mlx4_en"
-#define DRV_VERSION	"1.4.0"
-#define DRV_RELDATE	"Sep 2008"
+#define DRV_VERSION	"1.4.1.1"
+#define DRV_RELDATE	"June 2009"
 
 
 #define MLX4_EN_MSG_LEVEL	(NETIF_MSG_LINK | NETIF_MSG_IFDOWN)
 
-#define mlx4_dbg(mlevel, priv, format, arg...)	\
-	if (NETIF_MSG_##mlevel & priv->msg_enable) \
-	printk(KERN_DEBUG "%s %s: " format , DRV_NAME ,\
-		(dev_name(&priv->mdev->pdev->dev)) , ## arg)
+#define en_print(level, priv, format, arg...)			\
+	{							\
+	if ((priv)->registered)					\
+		printk(level "%s: %s: " format, DRV_NAME,	\
+			(priv->dev)->name, ## arg);		\
+	else							\
+		printk(level "%s: %s: Port %d: " format,	\
+			DRV_NAME, dev_name(&priv->mdev->pdev->dev), \
+			(priv)->port, ## arg);			\
+	}
+
+#define en_dbg(mlevel, priv, format, arg...)			\
+	{							\
+	if (NETIF_MSG_##mlevel & priv->msg_enable)		\
+		en_print(KERN_DEBUG, priv, format, ## arg)	\
+	}
+#define en_warn(priv, format, arg...)				\
+	en_print(KERN_WARNING, priv, format, ## arg)
+#define en_err(priv, format, arg...)				\
+	en_print(KERN_ERR, priv, format, ## arg)
 
 #define mlx4_err(mdev, format, arg...) \
 	printk(KERN_ERR "%s %s: " format , DRV_NAME ,\
-		(dev_name(&mdev->pdev->dev)) , ## arg)
+		dev_name(&mdev->pdev->dev) , ## arg)
 #define mlx4_info(mdev, format, arg...) \
 	printk(KERN_INFO "%s %s: " format , DRV_NAME ,\
-		(dev_name(&mdev->pdev->dev)) , ## arg)
+		dev_name(&mdev->pdev->dev) , ## arg)
 #define mlx4_warn(mdev, format, arg...) \
 	printk(KERN_WARNING "%s %s: " format , DRV_NAME ,\
-		(dev_name(&mdev->pdev->dev)) , ## arg)
+		dev_name(&mdev->pdev->dev) , ## arg)
 
 /*
  * Device constants
@@ -123,12 +139,14 @@ enum {
 #define MLX4_EN_MIN_RX_SIZE	(MLX4_EN_ALLOC_SIZE / SMP_CACHE_BYTES)
 #define MLX4_EN_MIN_TX_SIZE	(4096 / TXBB_SIZE)
 
-#define MLX4_EN_TX_RING_NUM		9
-#define MLX4_EN_DEF_TX_RING_SIZE	1024
+#define MLX4_EN_SMALL_PKT_SIZE		64
+#define MLX4_EN_NUM_TX_RINGS		8
+#define MLX4_EN_NUM_PPP_RINGS		8
+#define MLX4_EN_DEF_TX_RING_SIZE	512
 #define MLX4_EN_DEF_RX_RING_SIZE  	1024
 
-/* Target number of bytes to coalesce with interrupt moderation */
-#define MLX4_EN_RX_COAL_TARGET	0x20000
+/* Target number of packets to coalesce with interrupt moderation */
+#define MLX4_EN_RX_COAL_TARGET	44
 #define MLX4_EN_RX_COAL_TIME	0x10
 
 #define MLX4_EN_TX_COAL_PKTS	5
@@ -462,7 +480,6 @@ struct mlx4_en_priv {
 	int base_qpn;
 
 	struct mlx4_en_rss_map rss_map;
-	u16 tx_prio_map[8];
 	u32 flags;
 #define MLX4_EN_FLAG_PROMISC	0x1
 	u32 tx_ring_num;
@@ -500,8 +517,6 @@ void mlx4_en_stop_port(struct net_device *dev);
 void mlx4_en_free_resources(struct mlx4_en_priv *priv);
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv);
 
-int mlx4_en_get_profile(struct mlx4_en_dev *mdev);
-
 int mlx4_en_create_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq,
 		      int entries, int ring, enum cq_type mode);
 void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
@@ -512,6 +527,7 @@ int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
 
 void mlx4_en_poll_tx_cq(unsigned long data);
 void mlx4_en_tx_irq(struct mlx4_cq *mcq);
+u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb);
 int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev);
 
 int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring,
@@ -546,7 +562,6 @@ void mlx4_en_calc_rx_buf(struct net_device *dev);
 void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
 				 struct mlx4_en_rss_map *rss_map,
 				 int num_entries, int num_rings);
-void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num);
 int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv);
 void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv);
 int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring);
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 0caf74cae8b..5887e4764d2 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -209,7 +209,7 @@ int mlx4_mtt_init(struct mlx4_dev *dev, int npages, int page_shift,
 	} else
 		mtt->page_shift = page_shift;
 
-	for (mtt->order = 0, i = MLX4_MTT_ENTRY_PER_SEG; i < npages; i <<= 1)
+	for (mtt->order = 0, i = dev->caps.mtts_per_seg; i < npages; i <<= 1)
 		++mtt->order;
 
 	mtt->first_seg = mlx4_alloc_mtt_range(dev, mtt->order);
@@ -350,7 +350,7 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr)
 		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
 						   MLX4_MPT_PD_FLAG_RAE);
 		mpt_entry->mtt_sz    = cpu_to_be32((1 << mr->mtt.order) *
-						   MLX4_MTT_ENTRY_PER_SEG);
+						   dev->caps.mtts_per_seg);
 	} else {
 		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
 	}
@@ -391,7 +391,7 @@ static int mlx4_write_mtt_chunk(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
 	    (start_index + npages - 1) / (PAGE_SIZE / sizeof (u64)))
 		return -EINVAL;
 
-	if (start_index & (MLX4_MTT_ENTRY_PER_SEG - 1))
+	if (start_index & (dev->caps.mtts_per_seg - 1))
 		return -EINVAL;
 
 	mtts = mlx4_table_find(&priv->mr_table.mtt_table, mtt->first_seg +
@@ -402,7 +402,8 @@ static int mlx4_write_mtt_chunk(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
 	for (i = 0; i < npages; ++i)
 		mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
 
-	dma_sync_single(&dev->pdev->dev, dma_handle, npages * sizeof (u64), DMA_TO_DEVICE);
+	dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
+				npages * sizeof (u64), DMA_TO_DEVICE);
 
 	return 0;
 }
@@ -549,8 +550,8 @@ int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list
 	for (i = 0; i < npages; ++i)
 		fmr->mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
 
-	dma_sync_single(&dev->pdev->dev, fmr->dma_handle,
-			npages * sizeof(u64), DMA_TO_DEVICE);
+	dma_sync_single_for_cpu(&dev->pdev->dev, fmr->dma_handle,
+				npages * sizeof(u64), DMA_TO_DEVICE);
 
 	fmr->mpt->key    = cpu_to_be32(key);
 	fmr->mpt->lkey   = cpu_to_be32(key);
diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c
index cebdf3243ca..bd22df95adf 100644
--- a/drivers/net/mlx4/profile.c
+++ b/drivers/net/mlx4/profile.c
@@ -98,7 +98,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev,
 	profile[MLX4_RES_EQ].size     = dev_cap->eqc_entry_sz;
 	profile[MLX4_RES_DMPT].size   = dev_cap->dmpt_entry_sz;
 	profile[MLX4_RES_CMPT].size   = dev_cap->cmpt_entry_sz;
-	profile[MLX4_RES_MTT].size    = MLX4_MTT_ENTRY_PER_SEG * dev_cap->mtt_entry_sz;
+	profile[MLX4_RES_MTT].size    = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz;
 	profile[MLX4_RES_MCG].size    = MLX4_MGM_ENTRY_SIZE;
 
 	profile[MLX4_RES_QP].num      = request->num_qp;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 6bb5af35eda..b4e18a58cb1 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,6 +55,7 @@
 #include <linux/types.h>
 #include <linux/inet_lro.h>
 #include <asm/system.h>
+#include <linux/list.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
 static char mv643xx_eth_driver_version[] = "1.4";
@@ -88,7 +89,24 @@ static char mv643xx_eth_driver_version[] = "1.4";
 #define MAC_ADDR_LOW			0x0014
 #define MAC_ADDR_HIGH			0x0018
 #define SDMA_CONFIG			0x001c
+#define  TX_BURST_SIZE_16_64BIT		0x01000000
+#define  TX_BURST_SIZE_4_64BIT		0x00800000
+#define  BLM_TX_NO_SWAP			0x00000020
+#define  BLM_RX_NO_SWAP			0x00000010
+#define  RX_BURST_SIZE_16_64BIT		0x00000008
+#define  RX_BURST_SIZE_4_64BIT		0x00000004
 #define PORT_SERIAL_CONTROL		0x003c
+#define  SET_MII_SPEED_TO_100		0x01000000
+#define  SET_GMII_SPEED_TO_1000		0x00800000
+#define  SET_FULL_DUPLEX_MODE		0x00200000
+#define  MAX_RX_PACKET_9700BYTE		0x000a0000
+#define  DISABLE_AUTO_NEG_SPEED_GMII	0x00002000
+#define  DO_NOT_FORCE_LINK_FAIL		0x00000400
+#define  SERIAL_PORT_CONTROL_RESERVED	0x00000200
+#define  DISABLE_AUTO_NEG_FOR_FLOW_CTRL	0x00000008
+#define  DISABLE_AUTO_NEG_FOR_DUPLEX	0x00000004
+#define  FORCE_LINK_PASS		0x00000002
+#define  SERIAL_PORT_ENABLE		0x00000001
 #define PORT_STATUS			0x0044
 #define  TX_FIFO_EMPTY			0x00000400
 #define  TX_IN_PROGRESS			0x00000080
@@ -106,7 +124,9 @@ static char mv643xx_eth_driver_version[] = "1.4";
 #define TX_BW_BURST			0x005c
 #define INT_CAUSE			0x0060
 #define  INT_TX_END			0x07f80000
+#define  INT_TX_END_0			0x00080000
 #define  INT_RX				0x000003fc
+#define  INT_RX_0			0x00000004
 #define  INT_EXT			0x00000002
 #define INT_CAUSE_EXT			0x0064
 #define  INT_EXT_LINK_PHY		0x00110000
@@ -135,15 +155,8 @@ static char mv643xx_eth_driver_version[] = "1.4";
 
 
 /*
- * SDMA configuration register.
+ * SDMA configuration register default value.
  */
-#define RX_BURST_SIZE_4_64BIT		(2 << 1)
-#define RX_BURST_SIZE_16_64BIT		(4 << 1)
-#define BLM_RX_NO_SWAP			(1 << 4)
-#define BLM_TX_NO_SWAP			(1 << 5)
-#define TX_BURST_SIZE_4_64BIT		(2 << 22)
-#define TX_BURST_SIZE_16_64BIT		(4 << 22)
-
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
 		(RX_BURST_SIZE_4_64BIT	|	\
@@ -160,22 +173,11 @@ static char mv643xx_eth_driver_version[] = "1.4";
 
 
 /*
- * Port serial control register.
+ * Misc definitions.
  */
-#define SET_MII_SPEED_TO_100			(1 << 24)
-#define SET_GMII_SPEED_TO_1000			(1 << 23)
-#define SET_FULL_DUPLEX_MODE			(1 << 21)
-#define MAX_RX_PACKET_9700BYTE			(5 << 17)
-#define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
-#define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
-#define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
-#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL		(1 << 3)
-#define DISABLE_AUTO_NEG_FOR_DUPLEX		(1 << 2)
-#define FORCE_LINK_PASS				(1 << 1)
-#define SERIAL_PORT_ENABLE			(1 << 0)
-
-#define DEFAULT_RX_QUEUE_SIZE		128
-#define DEFAULT_TX_QUEUE_SIZE		256
+#define DEFAULT_RX_QUEUE_SIZE	128
+#define DEFAULT_TX_QUEUE_SIZE	256
+#define SKB_DMA_REALIGN		((PAGE_SIZE - NET_SKB_PAD) % SMP_CACHE_BYTES)
 
 
 /*
@@ -393,6 +395,7 @@ struct mv643xx_eth_private {
 	struct work_struct tx_timeout_task;
 
 	struct napi_struct napi;
+	u32 int_mask;
 	u8 oom;
 	u8 work_link;
 	u8 work_tx;
@@ -651,23 +654,20 @@ static int rxq_refill(struct rx_queue *rxq, int budget)
 	refilled = 0;
 	while (refilled < budget && rxq->rx_desc_count < rxq->rx_ring_size) {
 		struct sk_buff *skb;
-		int unaligned;
 		int rx;
 		struct rx_desc *rx_desc;
 
 		skb = __skb_dequeue(&mp->rx_recycle);
 		if (skb == NULL)
-			skb = dev_alloc_skb(mp->skb_size +
-					    dma_get_cache_alignment() - 1);
+			skb = dev_alloc_skb(mp->skb_size);
 
 		if (skb == NULL) {
 			mp->oom = 1;
 			goto oom;
 		}
 
-		unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
-		if (unaligned)
-			skb_reserve(skb, dma_get_cache_alignment() - unaligned);
+		if (SKB_DMA_REALIGN)
+			skb_reserve(skb, SKB_DMA_REALIGN);
 
 		refilled++;
 		rxq->rx_desc_count++;
@@ -969,8 +969,7 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force)
 		if (skb != NULL) {
 			if (skb_queue_len(&mp->rx_recycle) <
 					mp->rx_ring_size &&
-			    skb_recycle_check(skb, mp->skb_size +
-					dma_get_cache_alignment() - 1))
+			    skb_recycle_check(skb, mp->skb_size))
 				__skb_queue_head(&mp->rx_recycle, skb);
 			else
 				dev_kfree_skb(skb);
@@ -1723,20 +1722,20 @@ static void uc_addr_set(struct mv643xx_eth_private *mp, unsigned char *addr)
 
 static u32 uc_addr_filter_mask(struct net_device *dev)
 {
-	struct dev_addr_list *uc_ptr;
+	struct netdev_hw_addr *ha;
 	u32 nibbles;
 
 	if (dev->flags & IFF_PROMISC)
 		return 0;
 
 	nibbles = 1 << (dev->dev_addr[5] & 0x0f);
-	for (uc_ptr = dev->uc_list; uc_ptr != NULL; uc_ptr = uc_ptr->next) {
-		if (memcmp(dev->dev_addr, uc_ptr->da_addr, 5))
+	list_for_each_entry(ha, &dev->uc_list, list) {
+		if (memcmp(dev->dev_addr, ha->addr, 5))
 			return 0;
-		if ((dev->dev_addr[5] ^ uc_ptr->da_addr[5]) & 0xf0)
+		if ((dev->dev_addr[5] ^ ha->addr[5]) & 0xf0)
 			return 0;
 
-		nibbles |= 1 << (uc_ptr->da_addr[5] & 0x0f);
+		nibbles |= 1 << (ha->addr[5] & 0x0f);
 	}
 
 	return nibbles;
@@ -1810,7 +1809,6 @@ static void mv643xx_eth_program_multicast_filter(struct net_device *dev)
 	if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) {
 		int port_num;
 		u32 accept;
-		int i;
 
 oom:
 		port_num = mp->port_num;
@@ -2067,15 +2065,16 @@ static int mv643xx_eth_collect_events(struct mv643xx_eth_private *mp)
 	u32 int_cause;
 	u32 int_cause_ext;
 
-	int_cause = rdlp(mp, INT_CAUSE) & (INT_TX_END | INT_RX | INT_EXT);
+	int_cause = rdlp(mp, INT_CAUSE) & mp->int_mask;
 	if (int_cause == 0)
 		return 0;
 
 	int_cause_ext = 0;
-	if (int_cause & INT_EXT)
+	if (int_cause & INT_EXT) {
+		int_cause &= ~INT_EXT;
 		int_cause_ext = rdlp(mp, INT_CAUSE_EXT);
+	}
 
-	int_cause &= INT_TX_END | INT_RX;
 	if (int_cause) {
 		wrlp(mp, INT_CAUSE, ~int_cause);
 		mp->work_tx_end |= ((int_cause & INT_TX_END) >> 19) &
@@ -2182,6 +2181,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 		if (mp->work_link) {
 			mp->work_link = 0;
 			handle_link_event(mp);
+			work_done++;
 			continue;
 		}
 
@@ -2220,7 +2220,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 		if (mp->oom)
 			mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
 		napi_complete(napi);
-		wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
+		wrlp(mp, INT_MASK, mp->int_mask);
 	}
 
 	return work_done;
@@ -2341,6 +2341,14 @@ static void mv643xx_eth_recalc_skb_size(struct mv643xx_eth_private *mp)
 	 * size field are ignored by the hardware.
 	 */
 	mp->skb_size = (skb_size + 7) & ~7;
+
+	/*
+	 * If NET_SKB_PAD is smaller than a cache line,
+	 * netdev_alloc_skb() will cause skb->data to be misaligned
+	 * to a cache line boundary.  If this is the case, include
+	 * some extra space to allow re-aligning the data area.
+	 */
+	mp->skb_size += SKB_DMA_REALIGN;
 }
 
 static int mv643xx_eth_open(struct net_device *dev)
@@ -2366,6 +2374,8 @@ static int mv643xx_eth_open(struct net_device *dev)
 
 	skb_queue_head_init(&mp->rx_recycle);
 
+	mp->int_mask = INT_EXT;
+
 	for (i = 0; i < mp->rxq_count; i++) {
 		err = rxq_init(mp, i);
 		if (err) {
@@ -2375,6 +2385,7 @@ static int mv643xx_eth_open(struct net_device *dev)
 		}
 
 		rxq_refill(mp->rxq + i, INT_MAX);
+		mp->int_mask |= INT_RX_0 << i;
 	}
 
 	if (mp->oom) {
@@ -2389,12 +2400,13 @@ static int mv643xx_eth_open(struct net_device *dev)
 				txq_deinit(mp->txq + i);
 			goto out_free;
 		}
+		mp->int_mask |= INT_TX_END_0 << i;
 	}
 
 	port_start(mp);
 
 	wrlp(mp, INT_MASK_EXT, INT_EXT_LINK_PHY | INT_EXT_TX);
-	wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
+	wrlp(mp, INT_MASK, mp->int_mask);
 
 	return 0;
 
@@ -2538,7 +2550,7 @@ static void mv643xx_eth_netpoll(struct net_device *dev)
 
 	mv643xx_eth_irq(dev->irq, dev);
 
-	wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
+	wrlp(mp, INT_MASK, mp->int_mask);
 }
 #endif
 
diff --git a/drivers/net/mvme147.c b/drivers/net/mvme147.c
index 435e5a847c4..93c709d63e2 100644
--- a/drivers/net/mvme147.c
+++ b/drivers/net/mvme147.c
@@ -57,6 +57,17 @@ typedef void (*writerap_t)(void *, unsigned short);
 typedef void (*writerdp_t)(void *, unsigned short);
 typedef unsigned short (*readrdp_t)(void *);
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= m147lance_open,
+	.ndo_stop		= m147lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_tx_timeout		= lance_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 /* Initialise the one and only on-board 7990 */
 struct net_device * __init mvme147lance_probe(int unit)
 {
@@ -81,11 +92,7 @@ struct net_device * __init mvme147lance_probe(int unit)
 
 	/* Fill the dev fields */
 	dev->base_addr = (unsigned long)MVME147_LANCE_BASE;
-	dev->open = &m147lance_open;
-	dev->stop = &m147lance_close;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->set_multicast_list = &lance_set_multicast;
-	dev->tx_timeout = &lance_tx_timeout;
+	dev->netdev_ops = &lance_netdev_ops;
 	dev->dma = 0;
 
 	addr=(u_long *)ETHERNET_ADDRESS;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f2c4a665e93..1f6e36ea669 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.4-1.401"
+#define MYRI10GE_VERSION_STR "1.5.0-1.418"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -255,6 +255,7 @@ struct myri10ge_priv {
 	u32 read_write_dma;
 	u32 link_changes;
 	u32 msg_enable;
+	unsigned int board_number;
 };
 
 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
@@ -266,6 +267,13 @@ static char *myri10ge_fw_name = NULL;
 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 
+#define MYRI10GE_MAX_BOARDS 8
+static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
+    {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
+module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
+			 0444);
+MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
+
 static int myri10ge_ecrc_enable = 1;
 module_param(myri10ge_ecrc_enable, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
@@ -319,10 +327,6 @@ static int myri10ge_debug = -1;	/* defaults above */
 module_param(myri10ge_debug, int, 0);
 MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 
-static int myri10ge_lro = 1;
-module_param(myri10ge_lro, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload");
-
 static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
 module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_lro_max_pkts,
@@ -361,6 +365,8 @@ static inline void put_be32(__be32 val, __be32 __iomem * p)
 	__raw_writel((__force __u32) val, (__force void __iomem *)p);
 }
 
+static struct net_device_stats *myri10ge_get_stats(struct net_device *dev);
+
 static int
 myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 		  struct myri10ge_cmd *data, int atomic)
@@ -1290,7 +1296,7 @@ myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
 		remainder -= MYRI10GE_ALLOC_SIZE;
 	}
 
-	if (mgp->csum_flag && myri10ge_lro) {
+	if (dev->features & NETIF_F_LRO) {
 		rx_frags[0].page_offset += MXGEFW_PAD;
 		rx_frags[0].size -= MXGEFW_PAD;
 		len -= MXGEFW_PAD;
@@ -1412,6 +1418,7 @@ myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
 {
 	struct myri10ge_rx_done *rx_done = &ss->rx_done;
 	struct myri10ge_priv *mgp = ss->mgp;
+	struct net_device *netdev = mgp->dev;
 	unsigned long rx_bytes = 0;
 	unsigned long rx_packets = 0;
 	unsigned long rx_ok;
@@ -1445,7 +1452,7 @@ myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
 	ss->stats.rx_packets += rx_packets;
 	ss->stats.rx_bytes += rx_bytes;
 
-	if (myri10ge_lro)
+	if (netdev->features & NETIF_F_LRO)
 		lro_flush_all(&rx_done->lro_mgr);
 
 	/* restock receive rings if needed */
@@ -1686,7 +1693,7 @@ myri10ge_get_ringparam(struct net_device *netdev,
 	ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
 	ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
 	ring->rx_jumbo_max_pending = 0;
-	ring->tx_max_pending = mgp->ss[0].rx_small.mask + 1;
+	ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
 	ring->rx_mini_pending = ring->rx_mini_max_pending;
 	ring->rx_pending = ring->rx_max_pending;
 	ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
@@ -1706,12 +1713,17 @@ static u32 myri10ge_get_rx_csum(struct net_device *netdev)
 static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
 {
 	struct myri10ge_priv *mgp = netdev_priv(netdev);
+	int err = 0;
 
 	if (csum_enabled)
 		mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
-	else
+	else {
+		u32 flags = ethtool_op_get_flags(netdev);
+		err = ethtool_op_set_flags(netdev, (flags & ~ETH_FLAG_LRO));
 		mgp->csum_flag = 0;
-	return 0;
+
+	}
+	return err;
 }
 
 static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
@@ -1803,6 +1815,8 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
 	int slice;
 	int i;
 
+	/* force stats update */
+	(void)myri10ge_get_stats(netdev);
 	for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
 		data[i] = ((unsigned long *)&mgp->stats)[i];
 
@@ -1892,7 +1906,9 @@ static const struct ethtool_ops myri10ge_ethtool_ops = {
 	.get_sset_count = myri10ge_get_sset_count,
 	.get_ethtool_stats = myri10ge_get_ethtool_stats,
 	.set_msglevel = myri10ge_set_msglevel,
-	.get_msglevel = myri10ge_get_msglevel
+	.get_msglevel = myri10ge_get_msglevel,
+	.get_flags = ethtool_op_get_flags,
+	.set_flags = ethtool_op_set_flags
 };
 
 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
@@ -2671,7 +2687,7 @@ again:
 		/* we are out of transmit resources */
 		tx->stop_queue++;
 		netif_tx_stop_queue(netdev_queue);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Setup checksum offloading, if needed */
@@ -2876,7 +2892,6 @@ again:
 		tx->stop_queue++;
 		netif_tx_stop_queue(netdev_queue);
 	}
-	dev->trans_start = jiffies;
 	return 0;
 
 abort_linearize:
@@ -2969,6 +2984,7 @@ static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
 	struct net_device_stats *stats = &mgp->stats;
 	int i;
 
+	spin_lock(&mgp->stats_lock);
 	memset(stats, 0, sizeof(*stats));
 	for (i = 0; i < mgp->num_slices; i++) {
 		slice_stats = &mgp->ss[i].stats;
@@ -2979,6 +2995,7 @@ static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
 		stats->rx_dropped += slice_stats->rx_dropped;
 		stats->tx_dropped += slice_stats->tx_dropped;
 	}
+	spin_unlock(&mgp->stats_lock);
 	return stats;
 }
 
@@ -3253,6 +3270,8 @@ abort:
 
 static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
 {
+	int overridden = 0;
+
 	if (myri10ge_force_firmware == 0) {
 		int link_width, exp_cap;
 		u16 lnk;
@@ -3286,10 +3305,18 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
 		}
 	}
 	if (myri10ge_fw_name != NULL) {
-		dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
-			 myri10ge_fw_name);
+		overridden = 1;
 		mgp->fw_name = myri10ge_fw_name;
 	}
+	if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
+	    myri10ge_fw_names[mgp->board_number] != NULL &&
+	    strlen(myri10ge_fw_names[mgp->board_number])) {
+		mgp->fw_name = myri10ge_fw_names[mgp->board_number];
+		overridden = 1;
+	}
+	if (overridden)
+		dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
+			 mgp->fw_name);
 }
 
 #ifdef CONFIG_PM
@@ -3754,6 +3781,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int status = -ENXIO;
 	int dac_enabled;
 	unsigned hdr_offset, ss_offset;
+	static int board_number;
 
 	netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
 	if (netdev == NULL) {
@@ -3770,6 +3798,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	mgp->pause = myri10ge_flow_control;
 	mgp->intr_coal_delay = myri10ge_intr_coal_delay;
 	mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
+	mgp->board_number = board_number;
 	init_waitqueue_head(&mgp->down_wq);
 
 	if (pci_enable_device(pdev)) {
@@ -3884,6 +3913,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (dac_enabled)
 		netdev->features |= NETIF_F_HIGHDMA;
+	netdev->features |= NETIF_F_LRO;
+
+	netdev->vlan_features |= mgp->features;
+	if (mgp->fw_ver_tiny < 37)
+		netdev->vlan_features &= ~NETIF_F_TSO6;
+	if (mgp->fw_ver_tiny < 32)
+		netdev->vlan_features &= ~NETIF_F_TSO;
 
 	/* make sure we can get an irq, and that MSI can be
 	 * setup (if available).  Also ensure netdev->irq
@@ -3902,6 +3938,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
 		    (unsigned long)mgp);
 
+	spin_lock_init(&mgp->stats_lock);
 	SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
 	INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
 	status = register_netdev(netdev);
@@ -3919,6 +3956,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			 netdev->irq, mgp->tx_boundary, mgp->fw_name,
 			 (mgp->wc_enabled ? "Enabled" : "Disabled"));
 
+	board_number++;
 	return 0;
 
 abort_with_state:
@@ -4008,6 +4046,8 @@ static struct pci_device_id myri10ge_pci_tbl[] = {
 	{0},
 };
 
+MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
+
 static struct pci_driver myri10ge_driver = {
 	.name = "myri10ge",
 	.probe = myri10ge_probe,
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 9a802adba9a..5f0758bda6b 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -640,7 +640,7 @@ static int myri_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!TX_BUFFS_AVAIL(head, tail)) {
 		DTX(("no buffs available, returning 1\n"));
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irqsave(&mp->irq_lock, flags);
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 7d83896b8c2..3fcebb70151 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -374,7 +374,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
 	dev->ethtool_ops = &ne2k_pci_ethtool_ops;
 	NS8390_init(dev, 0);
 
-	memcpy(dev->dev_addr, SA_prom, 6);
+	memcpy(dev->dev_addr, SA_prom, dev->addr_len);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
 	i = register_netdev(dev);
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 6a843f7350a..a00bbfb9aed 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -104,7 +104,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 	}
 
 	SET_NETDEV_DEV(dev, device);
-	device->driver_data = dev;
+	dev_set_drvdata(device, dev);
 	ioaddr = edev->base_addr;
 
 	if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) {
@@ -225,7 +225,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 
 static int __devexit ne3210_eisa_remove (struct device *device)
 {
-	struct net_device  *dev    = device->driver_data;
+	struct net_device  *dev    = dev_get_drvdata(device);
 	unsigned long       ioaddr = to_eisa_device (device)->base_addr;
 
 	unregister_netdev (dev);
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index 1861d5bbd96..946366dcc99 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -301,6 +301,17 @@ netx_eth_phy_write(struct net_device *ndev, int phy_id, int reg, int value)
 	while (readl(NETX_MIIMU) & MIIMU_SNRDY);
 }
 
+static const struct net_device_ops netx_eth_netdev_ops = {
+	.ndo_open		= netx_eth_open,
+	.ndo_stop		= netx_eth_close,
+	.ndo_start_xmit		= netx_eth_hard_start_xmit,
+	.ndo_tx_timeout		= netx_eth_timeout,
+	.ndo_set_multicast_list	= netx_eth_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int netx_eth_enable(struct net_device *ndev)
 {
 	struct netx_eth_priv *priv = netdev_priv(ndev);
@@ -309,12 +320,8 @@ static int netx_eth_enable(struct net_device *ndev)
 
 	ether_setup(ndev);
 
-	ndev->open = netx_eth_open;
-	ndev->stop = netx_eth_close;
-	ndev->hard_start_xmit = netx_eth_hard_start_xmit;
-	ndev->tx_timeout = netx_eth_timeout;
+	ndev->netdev_ops = &netx_eth_netdev_ops;
 	ndev->watchdog_timeo = msecs_to_jiffies(5000);
-	ndev->set_multicast_list = netx_eth_set_multicast_list;
 
 	priv->msg_enable       = NETIF_MSG_LINK;
 	priv->mii.phy_id_mask  = 0x1f;
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index c40815169f3..ab11c2b3f0f 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -34,10 +34,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 #include <linux/netdevice.h>
@@ -46,21 +42,16 @@
 #include <linux/in.h>
 #include <linux/tcp.h>
 #include <linux/skbuff.h>
+#include <linux/firmware.h>
 
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#include <linux/interrupt.h>
 #include <linux/timer.h>
 
-#include <linux/mm.h>
-#include <linux/mman.h>
 #include <linux/vmalloc.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
 
 #include "netxen_nic_hw.h"
 
@@ -84,10 +75,10 @@
 	(sizeof(struct netxen_rx_buffer) * rds_ring->num_desc)
 #define STATUS_DESC_RINGSIZE(sds_ring)	\
 	(sizeof(struct status_desc) * (sds_ring)->num_desc)
-#define TX_BUFF_RINGSIZE(adapter)	\
-	(sizeof(struct netxen_cmd_buffer) * adapter->num_txd)
-#define TX_DESC_RINGSIZE(adapter)	\
-	(sizeof(struct cmd_desc_type0) * adapter->num_txd)
+#define TX_BUFF_RINGSIZE(tx_ring)	\
+	(sizeof(struct netxen_cmd_buffer) * tx_ring->num_desc)
+#define TX_DESC_RINGSIZE(tx_ring)	\
+	(sizeof(struct cmd_desc_type0) * tx_ring->num_desc)
 
 #define find_diff_among(a,b,range) ((a)<(b)?((b)-(a)):((b)+(range)-(a)))
 
@@ -118,6 +109,7 @@
 #define NX_P3_A2		0x30
 #define NX_P3_B0		0x40
 #define NX_P3_B1		0x41
+#define NX_P3_B2		0x42
 
 #define NX_IS_REVISION_P2(REVISION)     (REVISION <= NX_P2_C1)
 #define NX_IS_REVISION_P3(REVISION)     (REVISION >= NX_P3_A0)
@@ -203,18 +195,10 @@
 #define MAX_RCV_DESCRIPTORS_10G		4096
 #define MAX_JUMBO_RCV_DESCRIPTORS	1024
 #define MAX_LRO_RCV_DESCRIPTORS		8
-#define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
-#define MAX_JUMBO_RCV_DESC	MAX_JUMBO_RCV_DESCRIPTORS
-#define MAX_RCV_DESC		MAX_RCV_DESCRIPTORS
-#define MAX_RCVSTATUS_DESC	MAX_RCV_DESCRIPTORS
-#define MAX_EPG_DESCRIPTORS	(MAX_CMD_DESCRIPTORS * 8)
-#define NUM_RCV_DESC		(MAX_RCV_DESC + MAX_JUMBO_RCV_DESCRIPTORS + \
-				 MAX_LRO_RCV_DESCRIPTORS)
-#define MIN_TX_COUNT	4096
-#define MIN_RX_COUNT	4096
 #define NETXEN_CTX_SIGNATURE	0xdee0
+#define NETXEN_CTX_SIGNATURE_V2	0x0002dee0
+#define NETXEN_CTX_RESET	0xbad0
 #define NETXEN_RCV_PRODUCER(ringid)	(ringid)
-#define MAX_FRAME_SIZE	0x10000	/* 64K MAX size for LSO */
 
 #define PHAN_PEG_RCV_INITIALIZED	0xff01
 #define PHAN_PEG_RCV_START_INITIALIZE	0xff00
@@ -253,12 +237,19 @@ typedef u32 netxen_ctx_msg;
 #define netxen_set_msg_opcode(config_word, val)	\
 	((config_word) &= ~(0xf<<28), (config_word) |= (val & 0xf) << 28)
 
-struct netxen_rcv_context {
-	__le64 rcv_ring_addr;
-	__le32 rcv_ring_size;
+struct netxen_rcv_ring {
+	__le64 addr;
+	__le32 size;
 	__le32 rsrvd;
 };
 
+struct netxen_sts_ring {
+	__le64 addr;
+	__le32 size;
+	__le16 msi_index;
+	__le16 rsvd;
+} ;
+
 struct netxen_ring_ctx {
 
 	/* one command ring */
@@ -268,13 +259,18 @@ struct netxen_ring_ctx {
 	__le32 rsrvd;
 
 	/* three receive rings */
-	struct netxen_rcv_context rcv_ctx[3];
+	struct netxen_rcv_ring rcv_rings[NUM_RCV_DESC_RINGS];
 
-	/* one status ring */
 	__le64 sts_ring_addr;
 	__le32 sts_ring_size;
 
 	__le32 ctx_id;
+
+	__le64 rsrvd_2[3];
+	__le32 sts_ring_count;
+	__le32 rsrvd_3;
+	struct netxen_sts_ring sts_rings[NUM_STS_DESC_RINGS];
+
 } __attribute__ ((aligned(64)));
 
 /*
@@ -373,6 +369,7 @@ struct rcv_desc {
 /* opcode field in status_desc */
 #define NETXEN_NIC_RXPKT_DESC  0x04
 #define NETXEN_OLD_RXPKT_DESC  0x3f
+#define NETXEN_NIC_RESPONSE_DESC 0x05
 
 /* for status field in status_desc */
 #define STATUS_NEED_CKSUM	(1)
@@ -382,13 +379,11 @@ struct rcv_desc {
 #define STATUS_OWNER_HOST	(0x1ULL << 56)
 #define STATUS_OWNER_PHANTOM	(0x2ULL << 56)
 
-/* Note: sizeof(status_desc) should always be a mutliple of 2 */
-
-#define netxen_get_sts_desc_lro_cnt(status_desc)	\
-	((status_desc)->lro & 0x7F)
-#define netxen_get_sts_desc_lro_last_frag(status_desc)	\
-	(((status_desc)->lro & 0x80) >> 7)
-
+/* Status descriptor:
+   0-3 port, 4-7 status, 8-11 type, 12-27 total_length
+   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
+   53-55 desc_cnt, 56-57 owner, 58-63 opcode
+ */
 #define netxen_get_sts_port(sts_data)	\
 	((sts_data) & 0x0F)
 #define netxen_get_sts_status(sts_data)	\
@@ -403,41 +398,15 @@ struct rcv_desc {
 	(((sts_data) >> 44) & 0x0F)
 #define netxen_get_sts_pkt_offset(sts_data)	\
 	(((sts_data) >> 48) & 0x1F)
+#define netxen_get_sts_desc_cnt(sts_data)	\
+	(((sts_data) >> 53) & 0x7)
 #define netxen_get_sts_opcode(sts_data)	\
 	(((sts_data) >> 58) & 0x03F)
 
 struct status_desc {
-	/* Bit pattern: 0-3 port, 4-7 status, 8-11 type, 12-27 total_length
-	   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
-	   53-55 desc_cnt, 56-57 owner, 58-63 opcode
-	 */
-	__le64 status_desc_data;
-	union {
-		struct {
-			__le32 hash_value;
-			u8 hash_type;
-			u8 msg_type;
-			u8 unused;
-			union {
-				/* Bit pattern: 0-6 lro_count indicates frag
-				 * sequence, 7 last_frag indicates last frag
-				 */
-				u8 lro;
-
-				/* chained buffers */
-				u8 nr_frags;
-			};
-		};
-		struct {
-			__le16 frag_handles[4];
-		};
-	};
+	__le64 status_desc_data[2];
 } __attribute__ ((aligned(16)));
 
-enum {
-	NETXEN_RCV_PEG_0 = 0,
-	NETXEN_RCV_PEG_1
-};
 /* The version of the main data structure */
 #define	NETXEN_BDINFO_VERSION 1
 
@@ -447,85 +416,35 @@ enum {
 /* Max number of Gig ports on a Phantom board */
 #define NETXEN_MAX_PORTS 4
 
-typedef enum {
-	NETXEN_BRDTYPE_P1_BD = 0x0000,
-	NETXEN_BRDTYPE_P1_SB = 0x0001,
-	NETXEN_BRDTYPE_P1_SMAX = 0x0002,
-	NETXEN_BRDTYPE_P1_SOCK = 0x0003,
-
-	NETXEN_BRDTYPE_P2_SOCK_31 = 0x0008,
-	NETXEN_BRDTYPE_P2_SOCK_35 = 0x0009,
-	NETXEN_BRDTYPE_P2_SB35_4G = 0x000a,
-	NETXEN_BRDTYPE_P2_SB31_10G = 0x000b,
-	NETXEN_BRDTYPE_P2_SB31_2G = 0x000c,
-
-	NETXEN_BRDTYPE_P2_SB31_10G_IMEZ = 0x000d,
-	NETXEN_BRDTYPE_P2_SB31_10G_HMEZ = 0x000e,
-	NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f,
-
-	NETXEN_BRDTYPE_P3_REF_QG = 0x0021,
-	NETXEN_BRDTYPE_P3_HMEZ = 0x0022,
-	NETXEN_BRDTYPE_P3_10G_CX4_LP = 0x0023,
-	NETXEN_BRDTYPE_P3_4_GB = 0x0024,
-	NETXEN_BRDTYPE_P3_IMEZ = 0x0025,
-	NETXEN_BRDTYPE_P3_10G_SFP_PLUS = 0x0026,
-	NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
-	NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
-	NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
-	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
-	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
-	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
-	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
-	NETXEN_BRDTYPE_P3_10G_TP = 0x0080
-
-} netxen_brdtype_t;
-
-typedef enum {
-	NETXEN_BRDMFG_INVENTEC = 1
-} netxen_brdmfg;
-
-typedef enum {
-	MEM_ORG_128Mbx4 = 0x0,	/* DDR1 only */
-	MEM_ORG_128Mbx8 = 0x1,	/* DDR1 only */
-	MEM_ORG_128Mbx16 = 0x2,	/* DDR1 only */
-	MEM_ORG_256Mbx4 = 0x3,
-	MEM_ORG_256Mbx8 = 0x4,
-	MEM_ORG_256Mbx16 = 0x5,
-	MEM_ORG_512Mbx4 = 0x6,
-	MEM_ORG_512Mbx8 = 0x7,
-	MEM_ORG_512Mbx16 = 0x8,
-	MEM_ORG_1Gbx4 = 0x9,
-	MEM_ORG_1Gbx8 = 0xa,
-	MEM_ORG_1Gbx16 = 0xb,
-	MEM_ORG_2Gbx4 = 0xc,
-	MEM_ORG_2Gbx8 = 0xd,
-	MEM_ORG_2Gbx16 = 0xe,
-	MEM_ORG_128Mbx32 = 0x10002,	/* GDDR only */
-	MEM_ORG_256Mbx32 = 0x10005	/* GDDR only */
-} netxen_mn_mem_org_t;
-
-typedef enum {
-	MEM_ORG_512Kx36 = 0x0,
-	MEM_ORG_1Mx36 = 0x1,
-	MEM_ORG_2Mx36 = 0x2
-} netxen_sn_mem_org_t;
-
-typedef enum {
-	MEM_DEPTH_4MB = 0x1,
-	MEM_DEPTH_8MB = 0x2,
-	MEM_DEPTH_16MB = 0x3,
-	MEM_DEPTH_32MB = 0x4,
-	MEM_DEPTH_64MB = 0x5,
-	MEM_DEPTH_128MB = 0x6,
-	MEM_DEPTH_256MB = 0x7,
-	MEM_DEPTH_512MB = 0x8,
-	MEM_DEPTH_1GB = 0x9,
-	MEM_DEPTH_2GB = 0xa,
-	MEM_DEPTH_4GB = 0xb,
-	MEM_DEPTH_8GB = 0xc,
-	MEM_DEPTH_16GB = 0xd,
-	MEM_DEPTH_32GB = 0xe
-} netxen_mem_depth_t;
+#define NETXEN_BRDTYPE_P1_BD		0x0000
+#define NETXEN_BRDTYPE_P1_SB		0x0001
+#define NETXEN_BRDTYPE_P1_SMAX		0x0002
+#define NETXEN_BRDTYPE_P1_SOCK		0x0003
+
+#define NETXEN_BRDTYPE_P2_SOCK_31	0x0008
+#define NETXEN_BRDTYPE_P2_SOCK_35	0x0009
+#define NETXEN_BRDTYPE_P2_SB35_4G	0x000a
+#define NETXEN_BRDTYPE_P2_SB31_10G	0x000b
+#define NETXEN_BRDTYPE_P2_SB31_2G	0x000c
+
+#define NETXEN_BRDTYPE_P2_SB31_10G_IMEZ		0x000d
+#define NETXEN_BRDTYPE_P2_SB31_10G_HMEZ		0x000e
+#define NETXEN_BRDTYPE_P2_SB31_10G_CX4		0x000f
+
+#define NETXEN_BRDTYPE_P3_REF_QG	0x0021
+#define NETXEN_BRDTYPE_P3_HMEZ		0x0022
+#define NETXEN_BRDTYPE_P3_10G_CX4_LP	0x0023
+#define NETXEN_BRDTYPE_P3_4_GB		0x0024
+#define NETXEN_BRDTYPE_P3_IMEZ		0x0025
+#define NETXEN_BRDTYPE_P3_10G_SFP_PLUS	0x0026
+#define NETXEN_BRDTYPE_P3_10000_BASE_T	0x0027
+#define NETXEN_BRDTYPE_P3_XG_LOM	0x0028
+#define NETXEN_BRDTYPE_P3_4_GB_MM	0x0029
+#define NETXEN_BRDTYPE_P3_10G_SFP_CT	0x002a
+#define NETXEN_BRDTYPE_P3_10G_SFP_QT	0x002b
+#define NETXEN_BRDTYPE_P3_10G_CX4	0x0031
+#define NETXEN_BRDTYPE_P3_10G_XFP	0x0032
+#define NETXEN_BRDTYPE_P3_10G_TP	0x0080
 
 struct netxen_board_info {
 	u32 header_version;
@@ -676,17 +595,15 @@ struct netxen_new_user_info {
 #define PRIMARY_IMAGE_BAD	0xffffffff
 
 /* Flash memory map */
-typedef enum {
-	NETXEN_CRBINIT_START = 0,	/* Crbinit section */
-	NETXEN_BRDCFG_START = 0x4000,	/* board config */
-	NETXEN_INITCODE_START = 0x6000,	/* pegtune code */
-	NETXEN_BOOTLD_START = 0x10000,	/* bootld */
-	NETXEN_IMAGE_START = 0x43000,	/* compressed image */
-	NETXEN_SECONDARY_START = 0x200000,	/* backup images */
-	NETXEN_PXE_START = 0x3E0000,	/* user defined region */
-	NETXEN_USER_START = 0x3E8000,	/* User defined region for new boards */
-	NETXEN_FIXED_START = 0x3F0000	/* backup of crbinit */
-} netxen_flash_map_t;
+#define NETXEN_CRBINIT_START	0	/* crbinit section */
+#define NETXEN_BRDCFG_START	0x4000	/* board config */
+#define NETXEN_INITCODE_START	0x6000	/* pegtune code */
+#define NETXEN_BOOTLD_START	0x10000	/* bootld */
+#define NETXEN_IMAGE_START	0x43000	/* compressed image */
+#define NETXEN_SECONDARY_START	0x200000	/* backup images */
+#define NETXEN_PXE_START	0x3E0000	/* PXE boot rom */
+#define NETXEN_USER_START	0x3E8000	/* Firmare info */
+#define NETXEN_FIXED_START	0x3F0000	/* backup of crbinit */
 
 #define NX_FW_VERSION_OFFSET	(NETXEN_USER_START+0x408)
 #define NX_FW_SIZE_OFFSET	(NETXEN_USER_START+0x40c)
@@ -708,21 +625,8 @@ typedef enum {
 #define NETXEN_FLASH_SECONDARY_SIZE 	(NETXEN_USER_START-NETXEN_SECONDARY_START)
 #define NETXEN_NUM_PRIMARY_SECTORS	(0x20)
 #define NETXEN_NUM_CONFIG_SECTORS 	(1)
-#define PFX "NetXen: "
 extern char netxen_nic_driver_name[];
 
-/* Note: Make sure to not call this before adapter->port is valid */
-#if !defined(NETXEN_DEBUG)
-#define DPRINTK(klevel, fmt, args...)	do { \
-	} while (0)
-#else
-#define DPRINTK(klevel, fmt, args...)	do { \
-	printk(KERN_##klevel PFX "%s: %s: " fmt, __func__,\
-		(adapter != NULL && adapter->netdev != NULL) ? \
-		adapter->netdev->name : NULL, \
-		## args); } while(0)
-#endif
-
 /* Number of status descriptors to handle per interrupt */
 #define MAX_STATUS_HANDLE	(64)
 
@@ -732,7 +636,7 @@ extern char netxen_nic_driver_name[];
  */
 struct netxen_skb_frag {
 	u64 dma;
-	ulong length;
+	u64 length;
 };
 
 #define _netxen_set_bits(config_word, start, bits, val)	{\
@@ -793,34 +697,24 @@ struct netxen_hardware_context {
 
 	u8 cut_through;
 	u8 revision_id;
+	u8 pci_func;
+	u8 linkup;
 	u16 port_type;
-	int board_type;
-	u32 linkup;
-	/* Address of cmd ring in Phantom */
-	struct cmd_desc_type0 *cmd_desc_head;
-	dma_addr_t cmd_desc_phys_addr;
-	struct netxen_adapter *adapter;
-	int pci_func;
+	u16 board_type;
 };
 
 #define MINIMUM_ETHERNET_FRAME_SIZE	64	/* With FCS */
 #define ETHERNET_FCS_SIZE		4
 
 struct netxen_adapter_stats {
-	u64  rcvdbadskb;
 	u64  xmitcalled;
-	u64  xmitedframes;
 	u64  xmitfinished;
-	u64  badskblen;
-	u64  nocmddescriptor;
-	u64  polled;
 	u64  rxdropped;
 	u64  txdropped;
 	u64  csummed;
 	u64  no_rcv;
 	u64  rxbytes;
 	u64  txbytes;
-	u64  ints;
 };
 
 /*
@@ -852,14 +746,25 @@ struct nx_host_sds_ring {
 	struct napi_struct napi;
 	struct list_head free_list[NUM_RCV_DESC_RINGS];
 
-	u16 clean_tx;
-	u16 post_rxd;
 	int irq;
 
 	dma_addr_t phys_addr;
 	char name[IFNAMSIZ+4];
 };
 
+struct nx_host_tx_ring {
+	u32 producer;
+	__le32 *hw_consumer;
+	u32 sw_consumer;
+	u32 crb_cmd_producer;
+	u32 crb_cmd_consumer;
+	u32 num_desc;
+
+	struct netxen_cmd_buffer *cmd_buf_arr;
+	struct cmd_desc_type0 *desc_head;
+	dma_addr_t phys_addr;
+};
+
 /*
  * Receive context. There is one such structure per instance of the
  * receive processing. Any state information that is relevant to
@@ -871,8 +776,11 @@ struct netxen_recv_context {
 	u16 context_id;
 	u16 virt_port;
 
-	struct nx_host_rds_ring rds_rings[NUM_RCV_DESC_RINGS];
-	struct nx_host_sds_ring sds_rings[NUM_STS_DESC_RINGS];
+	struct nx_host_rds_ring *rds_rings;
+	struct nx_host_sds_ring *sds_rings;
+
+	struct netxen_ring_ctx *hwctx;
+	dma_addr_t phys_addr;
 };
 
 /* New HW context creation */
@@ -1111,8 +1019,8 @@ typedef struct {
 #define NETXEN_MAC_DEL	2
 
 typedef struct nx_mac_list_s {
-	struct nx_mac_list_s *next;
-	uint8_t mac_addr[MAX_ADDR_LEN];
+	struct list_head list;
+	uint8_t mac_addr[ETH_ALEN+2];
 } nx_mac_list_t;
 
 /*
@@ -1154,31 +1062,118 @@ typedef struct {
 
 #define NX_MAC_EVENT		0x1
 
-enum {
-	NX_NIC_H2C_OPCODE_START = 0,
-	NX_NIC_H2C_OPCODE_CONFIG_RSS,
-	NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
-	NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
-	NX_NIC_H2C_OPCODE_CONFIG_LED,
-	NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
-	NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
-	NX_NIC_H2C_OPCODE_LRO_REQUEST,
-	NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
-	NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
-	NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
-	NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
-	NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
-	NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
-	NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
-	NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
-	NX_NIC_H2C_OPCODE_GET_NET_STATS,
-	NX_NIC_H2C_OPCODE_LAST
-};
+/*
+ * Driver --> Firmware
+ */
+#define NX_NIC_H2C_OPCODE_START				0
+#define NX_NIC_H2C_OPCODE_CONFIG_RSS			1
+#define NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL		2
+#define NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE		3
+#define NX_NIC_H2C_OPCODE_CONFIG_LED			4
+#define NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS		5
+#define NX_NIC_H2C_OPCODE_CONFIG_L2_MAC			6
+#define NX_NIC_H2C_OPCODE_LRO_REQUEST			7
+#define NX_NIC_H2C_OPCODE_GET_SNMP_STATS		8
+#define NX_NIC_H2C_OPCODE_PROXY_START_REQUEST		9
+#define NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST		10
+#define NX_NIC_H2C_OPCODE_PROXY_SET_MTU			11
+#define NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE	12
+#define NX_NIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST	13
+#define NX_NIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST	14
+#define NX_NIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST	15
+#define NX_NIC_H2C_OPCODE_GET_NET_STATS			16
+#define NX_NIC_H2C_OPCODE_PROXY_UPDATE_P2V		17
+#define NX_NIC_H2C_OPCODE_CONFIG_IPADDR			18
+#define NX_NIC_H2C_OPCODE_CONFIG_LOOPBACK		19
+#define NX_NIC_H2C_OPCODE_PROXY_STOP_DONE		20
+#define NX_NIC_H2C_OPCODE_GET_LINKEVENT			21
+#define NX_NIC_C2C_OPCODE				22
+#define NX_NIC_H2C_OPCODE_LAST				23
+
+/*
+ * Firmware --> Driver
+ */
+
+#define NX_NIC_C2H_OPCODE_START				128
+#define NX_NIC_C2H_OPCODE_CONFIG_RSS_RESPONSE		129
+#define NX_NIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE	130
+#define NX_NIC_C2H_OPCODE_CONFIG_MAC_RESPONSE		131
+#define NX_NIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE	132
+#define NX_NIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE	133
+#define NX_NIC_C2H_OPCODE_LRO_DELETE_RESPONSE		134
+#define NX_NIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE	135
+#define NX_NIC_C2H_OPCODE_GET_SNMP_STATS		136
+#define NX_NIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY	137
+#define NX_NIC_C2H_OPCODE_INSTALL_LICENSE_REPLY		138
+#define NX_NIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
+#define NX_NIC_C2H_OPCODE_GET_NET_STATS_RESPONSE	140
+#define NX_NIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE	141
+#define NX_NIC_C2H_OPCODE_LAST				142
 
 #define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
 #define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
 #define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
 
+#define NX_FW_CAPABILITY_LINK_NOTIFICATION	(1 << 5)
+#define NX_FW_CAPABILITY_SWITCHING		(1 << 6)
+
+/* module types */
+#define LINKEVENT_MODULE_NOT_PRESENT			1
+#define LINKEVENT_MODULE_OPTICAL_UNKNOWN		2
+#define LINKEVENT_MODULE_OPTICAL_SRLR			3
+#define LINKEVENT_MODULE_OPTICAL_LRM			4
+#define LINKEVENT_MODULE_OPTICAL_SFP_1G			5
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE	6
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN	7
+#define LINKEVENT_MODULE_TWINAX				8
+
+#define LINKSPEED_10GBPS	10000
+#define LINKSPEED_1GBPS		1000
+#define LINKSPEED_100MBPS	100
+#define LINKSPEED_10MBPS	10
+
+#define LINKSPEED_ENCODED_10MBPS	0
+#define LINKSPEED_ENCODED_100MBPS	1
+#define LINKSPEED_ENCODED_1GBPS		2
+
+#define LINKEVENT_AUTONEG_DISABLED	0
+#define LINKEVENT_AUTONEG_ENABLED	1
+
+#define LINKEVENT_HALF_DUPLEX		0
+#define LINKEVENT_FULL_DUPLEX		1
+
+#define LINKEVENT_LINKSPEED_MBPS	0
+#define LINKEVENT_LINKSPEED_ENCODED	1
+
+/* firmware response header:
+ *	63:58 - message type
+ *	57:56 - owner
+ *	55:53 - desc count
+ *	52:48 - reserved
+ *	47:40 - completion id
+ *	39:32 - opcode
+ *	31:16 - error code
+ *	15:00 - reserved
+ */
+#define netxen_get_nic_msgtype(msg_hdr)	\
+	((msg_hdr >> 58) & 0x3F)
+#define netxen_get_nic_msg_compid(msg_hdr)	\
+	((msg_hdr >> 40) & 0xFF)
+#define netxen_get_nic_msg_opcode(msg_hdr)	\
+	((msg_hdr >> 32) & 0xFF)
+#define netxen_get_nic_msg_errcode(msg_hdr)	\
+	((msg_hdr >> 16) & 0xFFFF)
+
+typedef struct {
+	union {
+		struct {
+			u64 hdr;
+			u64 body[7];
+		};
+		u64 words[8];
+	};
+} nx_fw_msg_t;
+
 typedef struct {
 	__le64 qhdr;
 	__le64 req_hdr;
@@ -1218,99 +1213,96 @@ struct netxen_adapter {
 
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	int pci_using_dac;
-	struct net_device_stats net_stats;
-	int mtu;
-	int portnum;
-	u8 physical_port;
-	u16 tx_context_id;
-
-	uint8_t		mc_enabled;
-	uint8_t		max_mc_count;
-	nx_mac_list_t	*mac_list;
-
-	struct netxen_legacy_intr_set legacy_intr;
-
-	struct work_struct watchdog_task;
-	struct timer_list watchdog_timer;
-	struct work_struct  tx_timeout_task;
+	struct list_head mac_list;
 
 	u32 curr_window;
 	u32 crb_win;
 	rwlock_t adapter_lock;
 
-	u32 cmd_producer;
-	__le32 *cmd_consumer;
-	u32 last_cmd_consumer;
-	u32 crb_addr_cmd_producer;
-	u32 crb_addr_cmd_consumer;
 	spinlock_t tx_clean_lock;
 
-	u32 num_txd;
-	u32 num_rxd;
-	u32 num_jumbo_rxd;
-	u32 num_lro_rxd;
+	u16 num_txd;
+	u16 num_rxd;
+	u16 num_jumbo_rxd;
+	u16 num_lro_rxd;
+
+	u8 max_rds_rings;
+	u8 max_sds_rings;
+	u8 driver_mismatch;
+	u8 msix_supported;
+	u8 rx_csum;
+	u8 pci_using_dac;
+	u8 portnum;
+	u8 physical_port;
+
+	u8 mc_enabled;
+	u8 max_mc_count;
+	u8 rss_supported;
+	u8 resv2;
+	u32 resv3;
+
+	u8 has_link_events;
+	u8 resv1;
+	u16 tx_context_id;
+	u16 mtu;
+	u16 is_up;
 
-	int max_rds_rings;
-	int max_sds_rings;
+	u16 link_speed;
+	u16 link_duplex;
+	u16 link_autoneg;
+	u16 module_type;
 
+	u32 capabilities;
 	u32 flags;
 	u32 irq;
-	int driver_mismatch;
 	u32 temp;
 
-	u32 fw_major;
-	u32 fw_version;
-
-	int msix_supported;
-	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+	u32 msi_tgt_status;
+	u32 resv4;
 
 	struct netxen_adapter_stats stats;
 
-	u16 link_speed;
-	u16 link_duplex;
-	u16 state;
-	u16 link_autoneg;
-	int rx_csum;
-
-	struct netxen_cmd_buffer *cmd_buf_arr;	/* Command buffers for xmit */
-
-	/*
-	 * Receive instances. These can be either one per port,
-	 * or one per peg, etc.
-	 */
 	struct netxen_recv_context recv_ctx;
+	struct nx_host_tx_ring *tx_ring;
 
-	int is_up;
-	struct netxen_dummy_dma dummy_dma;
-	nx_nic_intr_coalesce_t coal;
-
-	/* Context interface shared between card and host */
-	struct netxen_ring_ctx *ctx_desc;
-	dma_addr_t ctx_desc_phys_addr;
-	int intr_scheme;
-	int msi_mode;
 	int (*enable_phy_interrupts) (struct netxen_adapter *);
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
-	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
+	int (*macaddr_set) (struct netxen_adapter *, u8 *);
 	int (*set_mtu) (struct netxen_adapter *, int);
 	int (*set_promisc) (struct netxen_adapter *, u32);
+	void (*set_multi) (struct net_device *);
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
 	int (*stop_port) (struct netxen_adapter *);
 
-	int (*hw_read_wx)(struct netxen_adapter *, ulong, void *, int);
-	int (*hw_write_wx)(struct netxen_adapter *, ulong, void *, int);
+	u32 (*hw_read_wx)(struct netxen_adapter *, ulong);
+	int (*hw_write_wx)(struct netxen_adapter *, ulong, u32);
 	int (*pci_mem_read)(struct netxen_adapter *, u64, void *, int);
 	int (*pci_mem_write)(struct netxen_adapter *, u64, void *, int);
 	int (*pci_write_immediate)(struct netxen_adapter *, u64, u32);
 	u32 (*pci_read_immediate)(struct netxen_adapter *, u64);
-	void (*pci_write_normalize)(struct netxen_adapter *, u64, u32);
-	u32 (*pci_read_normalize)(struct netxen_adapter *, u64);
 	unsigned long (*pci_set_window)(struct netxen_adapter *,
 			unsigned long long);
-};				/* netxen_adapter structure */
+
+	struct netxen_legacy_intr_set legacy_intr;
+
+	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+
+	struct netxen_dummy_dma dummy_dma;
+
+	struct work_struct watchdog_task;
+	struct timer_list watchdog_timer;
+	struct work_struct  tx_timeout_task;
+
+	struct net_device_stats net_stats;
+
+	nx_nic_intr_coalesce_t coal;
+
+	u32 fw_major;
+	u32 fw_version;
+	const struct firmware *fw;
+};
 
 /*
  * NetXen dma watchdog control structure
@@ -1330,46 +1322,6 @@ struct netxen_adapter {
 #define netxen_get_dma_watchdog_disabled(config_word) \
 	(((config_word) >> 1) & 0x1)
 
-/* Max number of xmit producer threads that can run simultaneously */
-#define	MAX_XMIT_PRODUCERS		16
-
-#define PCI_OFFSET_FIRST_RANGE(adapter, off)    \
-	((adapter)->ahw.pci_base0 + (off))
-#define PCI_OFFSET_SECOND_RANGE(adapter, off)   \
-	((adapter)->ahw.pci_base1 + (off) - SECOND_PAGE_GROUP_START)
-#define PCI_OFFSET_THIRD_RANGE(adapter, off)    \
-	((adapter)->ahw.pci_base2 + (off) - THIRD_PAGE_GROUP_START)
-
-static inline void __iomem *pci_base_offset(struct netxen_adapter *adapter,
-					    unsigned long off)
-{
-	if ((off < FIRST_PAGE_GROUP_END) && (off >= FIRST_PAGE_GROUP_START)) {
-		return (adapter->ahw.pci_base0 + off);
-	} else if ((off < SECOND_PAGE_GROUP_END) &&
-		   (off >= SECOND_PAGE_GROUP_START)) {
-		return (adapter->ahw.pci_base1 + off - SECOND_PAGE_GROUP_START);
-	} else if ((off < THIRD_PAGE_GROUP_END) &&
-		   (off >= THIRD_PAGE_GROUP_START)) {
-		return (adapter->ahw.pci_base2 + off - THIRD_PAGE_GROUP_START);
-	}
-	return NULL;
-}
-
-static inline void __iomem *pci_base(struct netxen_adapter *adapter,
-				     unsigned long off)
-{
-	if ((off < FIRST_PAGE_GROUP_END) && (off >= FIRST_PAGE_GROUP_START)) {
-		return adapter->ahw.pci_base0;
-	} else if ((off < SECOND_PAGE_GROUP_END) &&
-		   (off >= SECOND_PAGE_GROUP_START)) {
-		return adapter->ahw.pci_base1;
-	} else if ((off < THIRD_PAGE_GROUP_END) &&
-		   (off >= THIRD_PAGE_GROUP_START)) {
-		return adapter->ahw.pci_base2;
-	}
-	return NULL;
-}
-
 int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter);
@@ -1382,21 +1334,22 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
 /* Functions available from netxen_nic_hw.c */
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu);
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu);
-void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val);
-int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off);
-void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value);
-void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 *value);
-void netxen_nic_write_w1(struct netxen_adapter *adapter, u32 index, u32 value);
-void netxen_nic_read_w1(struct netxen_adapter *adapter, u32 index, u32 *value);
+
+int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr);
+int netxen_p3_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr);
+
+#define NXRD32(adapter, off) \
+	(adapter->hw_read_wx(adapter, off))
+#define NXWR32(adapter, off, val) \
+	(adapter->hw_write_wx(adapter, off, val))
 
 int netxen_nic_get_board_info(struct netxen_adapter *adapter);
 void netxen_nic_get_firmware_info(struct netxen_adapter *adapter);
 int netxen_nic_wol_supported(struct netxen_adapter *adapter);
 
-int netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+u32 netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off);
 int netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+		ulong off, u32 data);
 int netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
 		u64 off, void *data, int size);
 int netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
@@ -1412,16 +1365,13 @@ unsigned long netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
 void netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter,
 		u32 wndw);
 
-int netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+u32 netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off);
 int netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+		ulong off, u32 data);
 int netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 		u64 off, void *data, int size);
 int netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
 		u64 off, void *data, int size);
-void netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
-				 unsigned long off, int data);
 int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
 		u64 off, u32 data);
 u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off);
@@ -1435,8 +1385,9 @@ unsigned long netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 void netxen_free_adapter_offload(struct netxen_adapter *adapter);
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
-int netxen_receive_peg_ready(struct netxen_adapter *adapter);
 int netxen_load_firmware(struct netxen_adapter *adapter);
+void netxen_request_firmware(struct netxen_adapter *adapter);
+void netxen_release_firmware(struct netxen_adapter *adapter);
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
 
 int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
@@ -1475,6 +1426,8 @@ void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 int netxen_config_rss(struct netxen_adapter *adapter, int enable);
+int netxen_linkevent_request(struct netxen_adapter *adapter, int enable);
+void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup);
 
 int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
@@ -1483,7 +1436,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
 void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-		uint32_t crb_producer);
+		struct nx_host_tx_ring *tx_ring, uint32_t crb_producer);
 
 /*
  * NetXen Board information
@@ -1491,7 +1444,7 @@ void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
 
 #define NETXEN_MAX_SHORT_NAME 32
 struct netxen_brdinfo {
-	netxen_brdtype_t brdtype;	/* type of board */
+	int brdtype;	/* type of board */
 	long ports;		/* max no of physical ports */
 	char short_name[NETXEN_MAX_SHORT_NAME];
 };
@@ -1541,17 +1494,15 @@ dma_watchdog_shutdown_request(struct netxen_adapter *adapter)
 	u32 ctrl;
 
 	/* check if already inactive */
-	if (adapter->hw_read_wx(adapter,
-	    NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
-		printk(KERN_ERR "failed to read dma watchdog status\n");
+	ctrl = adapter->hw_read_wx(adapter,
+			NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
 
 	if (netxen_get_dma_watchdog_enabled(ctrl) == 0)
 		return 1;
 
 	/* Send the disable request */
 	netxen_set_dma_watchdog_disable_req(ctrl);
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
+	NXWR32(adapter, NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
 
 	return 0;
 }
@@ -1561,9 +1512,8 @@ dma_watchdog_shutdown_poll_result(struct netxen_adapter *adapter)
 {
 	u32 ctrl;
 
-	if (adapter->hw_read_wx(adapter,
-	    NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
-		printk(KERN_ERR "failed to read dma watchdog status\n");
+	ctrl = adapter->hw_read_wx(adapter,
+			NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
 
 	return (netxen_get_dma_watchdog_enabled(ctrl) == 0);
 }
@@ -1573,9 +1523,8 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 {
 	u32 ctrl;
 
-	if (adapter->hw_read_wx(adapter,
-		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
-		printk(KERN_ERR "failed to read dma watchdog status\n");
+	ctrl = adapter->hw_read_wx(adapter,
+			NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
 
 	if (netxen_get_dma_watchdog_enabled(ctrl))
 		return 1;
@@ -1583,8 +1532,7 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 	/* send the wakeup request */
 	netxen_set_dma_watchdog_enable_req(ctrl);
 
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
+	NXWR32(adapter, NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 9234473bc08..4754f5cffad 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -41,8 +41,7 @@ netxen_api_lock(struct netxen_adapter *adapter)
 
 	for (;;) {
 		/* Acquire PCIE HW semaphore5 */
-		netxen_nic_read_w0(adapter,
-			NETXEN_PCIE_REG(PCIE_SEM5_LOCK), &done);
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM5_LOCK));
 
 		if (done == 1)
 			break;
@@ -56,7 +55,7 @@ netxen_api_lock(struct netxen_adapter *adapter)
 	}
 
 #if 0
-	netxen_nic_write_w1(adapter,
+	NXWR32(adapter,
 		NETXEN_API_LOCK_ID, NX_OS_API_LOCK_DRIVER);
 #endif
 	return 0;
@@ -65,11 +64,8 @@ netxen_api_lock(struct netxen_adapter *adapter)
 static int
 netxen_api_unlock(struct netxen_adapter *adapter)
 {
-	u32 val;
-
 	/* Release PCIE HW semaphore5 */
-	netxen_nic_read_w0(adapter,
-		NETXEN_PCIE_REG(PCIE_SEM5_UNLOCK), &val);
+	NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM5_UNLOCK));
 	return 0;
 }
 
@@ -86,7 +82,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter)
 		if (++timeout > NX_OS_CRB_RETRY_COUNT)
 			return NX_CDRP_RSP_TIMEOUT;
 
-		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET, &rsp);
+		rsp = NXRD32(adapter, NX_CDRP_CRB_OFFSET);
 	} while (!NX_CDRP_IS_RSP(rsp));
 
 	return rsp;
@@ -106,16 +102,15 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 	if (netxen_api_lock(adapter))
 		return NX_RCODE_TIMEOUT;
 
-	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET, signature);
+	NXWR32(adapter, NX_SIGN_CRB_OFFSET, signature);
 
-	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET, arg1);
+	NXWR32(adapter, NX_ARG1_CRB_OFFSET, arg1);
 
-	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET, arg2);
+	NXWR32(adapter, NX_ARG2_CRB_OFFSET, arg2);
 
-	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET, arg3);
+	NXWR32(adapter, NX_ARG3_CRB_OFFSET, arg3);
 
-	netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
-			NX_CDRP_FORM_CMD(cmd));
+	NXWR32(adapter, NX_CDRP_CRB_OFFSET, NX_CDRP_FORM_CMD(cmd));
 
 	rsp = netxen_poll_rsp(adapter);
 
@@ -125,7 +120,7 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 
 		rcode = NX_RCODE_TIMEOUT;
 	} else if (rsp == NX_CDRP_RSP_FAIL) {
-		netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
+		rcode = NXRD32(adapter, NX_ARG1_CRB_OFFSET);
 
 		printk(KERN_ERR "%s: failed card response code:0x%x\n",
 				netxen_nic_driver_name, rcode);
@@ -328,6 +323,8 @@ nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
 	int	err = 0;
 	u64	offset, phys_addr;
 	dma_addr_t	rq_phys_addr, rsp_phys_addr;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
+	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
 	rq_size = SIZEOF_HOSTRQ_TX(nx_hostrq_tx_ctx_t);
 	rq_addr = pci_alloc_consistent(adapter->pdev,
@@ -362,15 +359,13 @@ nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
 
 	prq->dummy_dma_addr = cpu_to_le64(adapter->dummy_dma.phys_addr);
 
-	offset = adapter->ctx_desc_phys_addr+sizeof(struct netxen_ring_ctx);
+	offset = recv_ctx->phys_addr + sizeof(struct netxen_ring_ctx);
 	prq->cmd_cons_dma_addr = cpu_to_le64(offset);
 
 	prq_cds = &prq->cds_ring;
 
-	prq_cds->host_phys_addr =
-		cpu_to_le64(adapter->ahw.cmd_desc_phys_addr);
-
-	prq_cds->ring_size = cpu_to_le32(adapter->num_txd);
+	prq_cds->host_phys_addr = cpu_to_le64(tx_ring->phys_addr);
+	prq_cds->ring_size = cpu_to_le32(tx_ring->num_desc);
 
 	phys_addr = rq_phys_addr;
 	err = netxen_issue_cmd(adapter,
@@ -383,8 +378,7 @@ nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
 
 	if (err == NX_RCODE_SUCCESS) {
 		temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
-		adapter->crb_addr_cmd_producer =
-			NETXEN_NIC_REG(temp - 0x200);
+		tx_ring->crb_cmd_producer = NETXEN_NIC_REG(temp - 0x200);
 #if 0
 		adapter->tx_state =
 			le32_to_cpu(prsp->host_ctx_state);
@@ -448,7 +442,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x120)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x138),
+		{
+			NETXEN_NIC_REG(0x138),
+			NETXEN_NIC_REG_2(0x000),
+			NETXEN_NIC_REG_2(0x004),
+			NETXEN_NIC_REG_2(0x008),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_0,
+			NETXEN_NIC_REG_2(0x044),
+			NETXEN_NIC_REG_2(0x048),
+			NETXEN_NIC_REG_2(0x04c),
+		},
 	},
 	/* Instance 1 */
 	{
@@ -461,7 +467,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x164)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x17c),
+		{
+			NETXEN_NIC_REG(0x17c),
+			NETXEN_NIC_REG_2(0x020),
+			NETXEN_NIC_REG_2(0x024),
+			NETXEN_NIC_REG_2(0x028),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_1,
+			NETXEN_NIC_REG_2(0x064),
+			NETXEN_NIC_REG_2(0x068),
+			NETXEN_NIC_REG_2(0x06c),
+		},
 	},
 	/* Instance 2 */
 	{
@@ -474,7 +492,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x208)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x220),
+		{
+			NETXEN_NIC_REG(0x220),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_2,
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
 	},
 	/* Instance 3 */
 	{
@@ -487,7 +517,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x24c)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x264),
+		{
+			NETXEN_NIC_REG(0x264),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_3,
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
 	},
 };
 
@@ -497,84 +539,91 @@ netxen_init_old_ctx(struct netxen_adapter *adapter)
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	int ring;
-	int func_id = adapter->portnum;
-
-	adapter->ctx_desc->cmd_ring_addr =
-		cpu_to_le64(adapter->ahw.cmd_desc_phys_addr);
-	adapter->ctx_desc->cmd_ring_size =
-		cpu_to_le32(adapter->num_txd);
+	int port = adapter->portnum;
+	struct netxen_ring_ctx *hwctx;
+	u32 signature;
 
+	tx_ring = adapter->tx_ring;
 	recv_ctx = &adapter->recv_ctx;
+	hwctx = recv_ctx->hwctx;
+
+	hwctx->cmd_ring_addr = cpu_to_le64(tx_ring->phys_addr);
+	hwctx->cmd_ring_size = cpu_to_le32(tx_ring->num_desc);
+
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 
-		adapter->ctx_desc->rcv_ctx[ring].rcv_ring_addr =
+		hwctx->rcv_rings[ring].addr =
 			cpu_to_le64(rds_ring->phys_addr);
-		adapter->ctx_desc->rcv_ctx[ring].rcv_ring_size =
+		hwctx->rcv_rings[ring].size =
 			cpu_to_le32(rds_ring->num_desc);
 	}
-	sds_ring = &recv_ctx->sds_rings[0];
-	adapter->ctx_desc->sts_ring_addr = cpu_to_le64(sds_ring->phys_addr);
-	adapter->ctx_desc->sts_ring_size = cpu_to_le32(sds_ring->num_desc);
-
-	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_LO(func_id),
-			lower32(adapter->ctx_desc_phys_addr));
-	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_HI(func_id),
-			upper32(adapter->ctx_desc_phys_addr));
-	adapter->pci_write_normalize(adapter, CRB_CTX_SIGNATURE_REG(func_id),
-			NETXEN_CTX_SIGNATURE | func_id);
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+
+		if (ring == 0) {
+			hwctx->sts_ring_addr = cpu_to_le64(sds_ring->phys_addr);
+			hwctx->sts_ring_size = cpu_to_le32(sds_ring->num_desc);
+		}
+		hwctx->sts_rings[ring].addr = cpu_to_le64(sds_ring->phys_addr);
+		hwctx->sts_rings[ring].size = cpu_to_le32(sds_ring->num_desc);
+		hwctx->sts_rings[ring].msi_index = cpu_to_le16(ring);
+	}
+	hwctx->sts_ring_count = cpu_to_le32(adapter->max_sds_rings);
+
+	signature = (adapter->max_sds_rings > 1) ?
+		NETXEN_CTX_SIGNATURE_V2 : NETXEN_CTX_SIGNATURE;
+
+	NXWR32(adapter, CRB_CTX_ADDR_REG_LO(port),
+			lower32(recv_ctx->phys_addr));
+	NXWR32(adapter, CRB_CTX_ADDR_REG_HI(port),
+			upper32(recv_ctx->phys_addr));
+	NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
+			signature | port);
 	return 0;
 }
 
-static uint32_t sw_int_mask[4] = {
-	CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
-	CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
-};
-
 int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 {
-	struct netxen_hardware_context *hw = &adapter->ahw;
-	u32 state = 0;
 	void *addr;
 	int err = 0;
 	int ring;
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 
 	struct pci_dev *pdev = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
+	int port = adapter->portnum;
 
-	err = netxen_receive_peg_ready(adapter);
-	if (err) {
-		printk(KERN_ERR "Rcv Peg initialization not complete:%x.\n",
-				state);
-		return err;
-	}
+	recv_ctx = &adapter->recv_ctx;
+	tx_ring = adapter->tx_ring;
 
 	addr = pci_alloc_consistent(pdev,
 			sizeof(struct netxen_ring_ctx) + sizeof(uint32_t),
-			&adapter->ctx_desc_phys_addr);
-
+			&recv_ctx->phys_addr);
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "failed to allocate hw context\n");
 		return -ENOMEM;
 	}
+
 	memset(addr, 0, sizeof(struct netxen_ring_ctx));
-	adapter->ctx_desc = (struct netxen_ring_ctx *)addr;
-	adapter->ctx_desc->ctx_id = cpu_to_le32(adapter->portnum);
-	adapter->ctx_desc->cmd_consumer_offset =
-		cpu_to_le64(adapter->ctx_desc_phys_addr +
+	recv_ctx->hwctx = (struct netxen_ring_ctx *)addr;
+	recv_ctx->hwctx->ctx_id = cpu_to_le32(port);
+	recv_ctx->hwctx->cmd_consumer_offset =
+		cpu_to_le64(recv_ctx->phys_addr +
 			sizeof(struct netxen_ring_ctx));
-	adapter->cmd_consumer =
+	tx_ring->hw_consumer =
 		(__le32 *)(((char *)addr) + sizeof(struct netxen_ring_ctx));
 
 	/* cmd desc ring */
-	addr = pci_alloc_consistent(pdev,
-			TX_DESC_RINGSIZE(adapter),
-			&hw->cmd_desc_phys_addr);
+	addr = pci_alloc_consistent(pdev, TX_DESC_RINGSIZE(tx_ring),
+			&tx_ring->phys_addr);
 
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate tx desc ring\n",
@@ -582,9 +631,7 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 		return -ENOMEM;
 	}
 
-	hw->cmd_desc_head = (struct cmd_desc_type0 *)addr;
-
-	recv_ctx = &adapter->recv_ctx;
+	tx_ring->desc_head = (struct cmd_desc_type0 *)addr;
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
@@ -602,8 +649,7 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 
 		if (adapter->fw_major < 4)
 			rds_ring->crb_rcv_producer =
-				recv_crb_registers[adapter->portnum].
-				crb_rcv_producer[ring];
+				recv_crb_registers[port].crb_rcv_producer[ring];
 	}
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
@@ -620,13 +666,16 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 			goto err_out_free;
 		}
 		sds_ring->desc_head = (struct status_desc *)addr;
+
+		sds_ring->crb_sts_consumer =
+			recv_crb_registers[port].crb_sts_consumer[ring];
+
+		sds_ring->crb_intr_mask =
+			recv_crb_registers[port].sw_int_mask[ring];
 	}
 
 
 	if (adapter->fw_major >= 4) {
-		adapter->intr_scheme = INTR_SCHEME_PERPORT;
-		adapter->msi_mode = MSI_MODE_MULTIFUNC;
-
 		err = nx_fw_cmd_create_rx_ctx(adapter);
 		if (err)
 			goto err_out_free;
@@ -634,23 +683,11 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 		if (err)
 			goto err_out_free;
 	} else {
-		sds_ring = &recv_ctx->sds_rings[0];
-		sds_ring->crb_sts_consumer =
-			recv_crb_registers[adapter->portnum].crb_sts_consumer;
-
-		adapter->intr_scheme = adapter->pci_read_normalize(adapter,
-				CRB_NIC_CAPABILITIES_FW);
-		adapter->msi_mode = adapter->pci_read_normalize(adapter,
-				CRB_NIC_MSI_MODE_FW);
-		recv_ctx->sds_rings[0].crb_intr_mask =
-				sw_int_mask[adapter->portnum];
-
 		err = netxen_init_old_ctx(adapter);
 		if (err) {
 			netxen_free_hw_resources(adapter);
 			return err;
 		}
-
 	}
 
 	return 0;
@@ -665,32 +702,40 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	int ring;
 
+	int port = adapter->portnum;
+
 	if (adapter->fw_major >= 4) {
 		nx_fw_cmd_destroy_tx_ctx(adapter);
 		nx_fw_cmd_destroy_rx_ctx(adapter);
+	} else {
+		netxen_api_lock(adapter);
+		NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
+				NETXEN_CTX_RESET | port);
+		netxen_api_unlock(adapter);
 	}
 
-	if (adapter->ctx_desc != NULL) {
+	recv_ctx = &adapter->recv_ctx;
+
+	if (recv_ctx->hwctx != NULL) {
 		pci_free_consistent(adapter->pdev,
 				sizeof(struct netxen_ring_ctx) +
 				sizeof(uint32_t),
-				adapter->ctx_desc,
-				adapter->ctx_desc_phys_addr);
-		adapter->ctx_desc = NULL;
+				recv_ctx->hwctx,
+				recv_ctx->phys_addr);
+		recv_ctx->hwctx = NULL;
 	}
 
-	if (adapter->ahw.cmd_desc_head != NULL) {
+	tx_ring = adapter->tx_ring;
+	if (tx_ring->desc_head != NULL) {
 		pci_free_consistent(adapter->pdev,
-				sizeof(struct cmd_desc_type0) *
-				adapter->num_txd,
-				adapter->ahw.cmd_desc_head,
-				adapter->ahw.cmd_desc_phys_addr);
-		adapter->ahw.cmd_desc_head = NULL;
+				TX_DESC_RINGSIZE(tx_ring),
+				tx_ring->desc_head, tx_ring->phys_addr);
+		tx_ring->desc_head = NULL;
 	}
 
-	recv_ctx = &adapter->recv_ctx;
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index a677ff89518..e16ea46c24b 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -30,7 +30,6 @@
 
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <asm/uaccess.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 #include <linux/netdevice.h>
@@ -53,13 +52,9 @@ struct netxen_nic_stats {
 #define NETXEN_NIC_INVALID_DATA 0xDEADBEEF
 
 static const struct netxen_nic_stats netxen_nic_gstrings_stats[] = {
-	{"rcvd_bad_skb", NETXEN_NIC_STAT(stats.rcvdbadskb)},
 	{"xmit_called", NETXEN_NIC_STAT(stats.xmitcalled)},
-	{"xmited_frames", NETXEN_NIC_STAT(stats.xmitedframes)},
 	{"xmit_finished", NETXEN_NIC_STAT(stats.xmitfinished)},
-	{"bad_skb_len", NETXEN_NIC_STAT(stats.badskblen)},
-	{"no_cmd_desc", NETXEN_NIC_STAT(stats.nocmddescriptor)},
-	{"polled", NETXEN_NIC_STAT(stats.polled)},
+	{"rx_dropped", NETXEN_NIC_STAT(stats.rxdropped)},
 	{"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)},
 	{"csummed", NETXEN_NIC_STAT(stats.csummed)},
 	{"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)},
@@ -97,12 +92,9 @@ netxen_nic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
 	strncpy(drvinfo->driver, netxen_nic_driver_name, 32);
 	strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32);
 	write_lock_irqsave(&adapter->adapter_lock, flags);
-	fw_major = adapter->pci_read_normalize(adapter,
-					NETXEN_FW_VERSION_MAJOR);
-	fw_minor = adapter->pci_read_normalize(adapter,
-					NETXEN_FW_VERSION_MINOR);
-	fw_build = adapter->pci_read_normalize(adapter,
-					NETXEN_FW_VERSION_SUB);
+	fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+	fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+	fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
 	write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
 
@@ -115,6 +107,7 @@ static int
 netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
+	int check_sfp_module = 0;
 
 	/* read which mode */
 	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
@@ -139,7 +132,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
 		u32 val;
 
-		adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
+		val = NXRD32(adapter, NETXEN_PORT_MODE_ADDR);
 		if (val == NETXEN_PORT_MODE_802_3_AP) {
 			ecmd->supported = SUPPORTED_1000baseT_Full;
 			ecmd->advertising = ADVERTISED_1000baseT_Full;
@@ -148,13 +141,19 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			ecmd->advertising = ADVERTISED_10000baseT_Full;
 		}
 
+		if (netif_running(dev) && adapter->has_link_events) {
+			ecmd->speed = adapter->link_speed;
+			ecmd->autoneg = adapter->link_autoneg;
+			ecmd->duplex = adapter->link_duplex;
+			goto skip;
+		}
+
 		ecmd->port = PORT_TP;
 
 		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 			u16 pcifn = adapter->ahw.pci_func;
 
-			adapter->hw_read_wx(adapter,
-				P3_LINK_SPEED_REG(pcifn), &val, 4);
+			val = NXRD32(adapter, P3_LINK_SPEED_REG(pcifn));
 			ecmd->speed = P3_LINK_SPEED_MHZ *
 					P3_LINK_SPEED_VAL(pcifn, val);
 		} else
@@ -165,10 +164,11 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	} else
 		return -EIO;
 
+skip:
 	ecmd->phy_address = adapter->physical_port;
 	ecmd->transceiver = XCVR_EXTERNAL;
 
-	switch ((netxen_brdtype_t)adapter->ahw.board_type) {
+	switch (adapter->ahw.board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 	case NETXEN_BRDTYPE_P2_SB31_2G:
 	case NETXEN_BRDTYPE_P3_REF_QG:
@@ -195,7 +195,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	case NETXEN_BRDTYPE_P3_HMEZ:
 		ecmd->supported |= SUPPORTED_MII;
 		ecmd->advertising |= ADVERTISED_MII;
-		ecmd->port = PORT_FIBRE;
+		ecmd->port = PORT_MII;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
@@ -203,6 +203,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 		ecmd->advertising |= ADVERTISED_TP;
 		ecmd->supported |= SUPPORTED_TP;
+		check_sfp_module = netif_running(dev) &&
+			adapter->has_link_events;
 	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
@@ -217,6 +219,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			ecmd->advertising |=
 				(ADVERTISED_FIBRE | ADVERTISED_TP);
 			ecmd->port = PORT_FIBRE;
+			check_sfp_module = netif_running(dev) &&
+				adapter->has_link_events;
 		} else {
 			ecmd->autoneg = AUTONEG_ENABLE;
 			ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
@@ -227,10 +231,28 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		break;
 	default:
 		printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
-		       (netxen_brdtype_t)adapter->ahw.board_type);
+				adapter->ahw.board_type);
 		return -EIO;
 	}
 
+	if (check_sfp_module) {
+		switch (adapter->module_type) {
+		case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
+		case LINKEVENT_MODULE_OPTICAL_SRLR:
+		case LINKEVENT_MODULE_OPTICAL_LRM:
+		case LINKEVENT_MODULE_OPTICAL_SFP_1G:
+			ecmd->port = PORT_FIBRE;
+			break;
+		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
+		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
+		case LINKEVENT_MODULE_TWINAX:
+			ecmd->port = PORT_TP;
+			break;
+		default:
+			ecmd->port = -1;
+		}
+	}
+
 	return 0;
 }
 
@@ -398,12 +420,11 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 	regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
 	    (adapter->pdev)->device;
 	/* which mode */
-	adapter->hw_read_wx(adapter, NETXEN_NIU_MODE, &regs_buff[0], 4);
+	regs_buff[0] = NXRD32(adapter, NETXEN_NIU_MODE);
 	mode = regs_buff[0];
 
 	/* Common registers to all the modes */
-	adapter->hw_read_wx(adapter,
-			NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER, &regs_buff[2], 4);
+	regs_buff[2] = NXRD32(adapter, NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER);
 	/* GB/XGB Mode */
 	mode = (mode / 2) - 1;
 	window = 0;
@@ -414,9 +435,8 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 				window = adapter->physical_port *
 					NETXEN_NIC_PORT_WINDOW;
 
-			adapter->hw_read_wx(adapter,
-				niu_registers[mode].reg[i - 3] + window,
-				&regs_buff[i], 4);
+			regs_buff[i] = NXRD32(adapter,
+				niu_registers[mode].reg[i - 3] + window);
 		}
 
 	}
@@ -440,7 +460,7 @@ static u32 netxen_nic_test_link(struct net_device *dev)
 			return !val;
 		}
 	} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
+		val = NXRD32(adapter, CRB_XG_STATE);
 		return (val == XG_LINK_UP) ? 0 : 1;
 	}
 	return -EIO;
@@ -504,10 +524,9 @@ netxen_nic_get_pauseparam(struct net_device *dev,
 		if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
 			return;
 		/* get flow control settings */
-		netxen_nic_read_w0(adapter,NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				&val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port));
 		pause->rx_pause = netxen_gb_get_rx_flowctl(val);
-		netxen_nic_read_w0(adapter, NETXEN_NIU_GB_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_PAUSE_CTL);
 		switch (port) {
 			case 0:
 				pause->tx_pause = !(netxen_gb_get_gb0_mask(val));
@@ -527,7 +546,7 @@ netxen_nic_get_pauseparam(struct net_device *dev,
 		if ((port < 0) || (port > NETXEN_NIU_MAX_XG_PORTS))
 			return;
 		pause->rx_pause = 1;
-		netxen_nic_read_w0(adapter, NETXEN_NIU_XG_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_XG_PAUSE_CTL);
 		if (port == 0)
 			pause->tx_pause = !(netxen_xg_get_xg0_mask(val));
 		else
@@ -550,18 +569,17 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 		if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
 			return -EIO;
 		/* set flow control */
-		netxen_nic_read_w0(adapter,
-					NETXEN_NIU_GB_MAC_CONFIG_0(port), &val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port));
 
 		if (pause->rx_pause)
 			netxen_gb_rx_flowctl(val);
 		else
 			netxen_gb_unset_rx_flowctl(val);
 
-		netxen_nic_write_w0(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+		NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 				val);
 		/* set autoneg */
-		netxen_nic_read_w0(adapter, NETXEN_NIU_GB_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_PAUSE_CTL);
 		switch (port) {
 			case 0:
 				if (pause->tx_pause)
@@ -589,11 +607,11 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 					netxen_gb_set_gb3_mask(val);
 				break;
 		}
-		netxen_nic_write_w0(adapter, NETXEN_NIU_GB_PAUSE_CTL, val);
+		NXWR32(adapter, NETXEN_NIU_GB_PAUSE_CTL, val);
 	} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
 		if ((port < 0) || (port > NETXEN_NIU_MAX_XG_PORTS))
 			return -EIO;
-		netxen_nic_read_w0(adapter, NETXEN_NIU_XG_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_XG_PAUSE_CTL);
 		if (port == 0) {
 			if (pause->tx_pause)
 				netxen_xg_unset_xg0_mask(val);
@@ -605,7 +623,7 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 			else
 				netxen_xg_set_xg1_mask(val);
 		}
-		netxen_nic_write_w0(adapter, NETXEN_NIU_XG_PAUSE_CTL, val);
+		NXWR32(adapter, NETXEN_NIU_XG_PAUSE_CTL, val);
 	} else {
 		printk(KERN_ERR "%s: Unknown board type: %x\n",
 				netxen_nic_driver_name,
@@ -619,14 +637,14 @@ static int netxen_nic_reg_test(struct net_device *dev)
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	u32 data_read, data_written;
 
-	netxen_nic_read_w0(adapter, NETXEN_PCIX_PH_REG(0), &data_read);
+	data_read = NXRD32(adapter, NETXEN_PCIX_PH_REG(0));
 	if ((data_read & 0xffff) != PHAN_VENDOR_ID)
 	return 1;
 
 	data_written = (u32)0xa5a5a5a5;
 
-	netxen_nic_reg_write(adapter, CRB_SCRATCHPAD_TEST, data_written);
-	data_read = adapter->pci_read_normalize(adapter, CRB_SCRATCHPAD_TEST);
+	NXWR32(adapter, CRB_SCRATCHPAD_TEST, data_written);
+	data_read = NXRD32(adapter, CRB_SCRATCHPAD_TEST);
 	if (data_written != data_read)
 		return 1;
 
@@ -743,11 +761,11 @@ netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		return;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG_NV);
 	if (wol_cfg & (1UL << adapter->portnum))
 		wol->supported |= WAKE_MAGIC;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG);
 	if (wol_cfg & (1UL << adapter->portnum))
 		wol->wolopts |= WAKE_MAGIC;
 }
@@ -764,16 +782,16 @@ netxen_nic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EOPNOTSUPP;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG_NV);
 	if (!(wol_cfg & (1 << adapter->portnum)))
 		return -EOPNOTSUPP;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG);
 	if (wol->wolopts & WAKE_MAGIC)
 		wol_cfg |= 1UL << adapter->portnum;
 	else
 		wol_cfg &= ~(1UL << adapter->portnum);
-	netxen_nic_reg_write(adapter, NETXEN_WOL_CONFIG, wol_cfg);
+	NXWR32(adapter, NETXEN_WOL_CONFIG, wol_cfg);
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 016c62129c7..7f0ddbfa7b2 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -31,16 +31,8 @@
 #ifndef __NETXEN_NIC_HDR_H_
 #define __NETXEN_NIC_HDR_H_
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/string.h>		/* for memset */
 
 /*
  * The basic unit of access when reading/writing control registers.
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 5026811c04c..42ffb825ebf 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -32,7 +32,6 @@
 #include "netxen_nic_hw.h"
 #include "netxen_nic_phan_reg.h"
 
-#include <linux/firmware.h>
 #include <net/ip.h>
 
 #define MASK(n) ((1ULL<<(n))-1)
@@ -48,8 +47,49 @@
 #define CRB_HI(off)	((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000))
 #define CRB_INDIRECT_2M	(0x1e0000UL)
 
+#ifndef readq
+static inline u64 readq(void __iomem *addr)
+{
+	return readl(addr) | (((u64) readl(addr + 4)) << 32LL);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(u64 val, void __iomem *addr)
+{
+	writel(((u32) (val)), (addr));
+	writel(((u32) (val >> 32)), (addr + 4));
+}
+#endif
+
+#define ADDR_IN_RANGE(addr, low, high)	\
+	(((addr) < (high)) && ((addr) >= (low)))
+
+#define PCI_OFFSET_FIRST_RANGE(adapter, off)    \
+	((adapter)->ahw.pci_base0 + (off))
+#define PCI_OFFSET_SECOND_RANGE(adapter, off)   \
+	((adapter)->ahw.pci_base1 + (off) - SECOND_PAGE_GROUP_START)
+#define PCI_OFFSET_THIRD_RANGE(adapter, off)    \
+	((adapter)->ahw.pci_base2 + (off) - THIRD_PAGE_GROUP_START)
+
+static void __iomem *pci_base_offset(struct netxen_adapter *adapter,
+					    unsigned long off)
+{
+	if (ADDR_IN_RANGE(off, FIRST_PAGE_GROUP_START, FIRST_PAGE_GROUP_END))
+		return PCI_OFFSET_FIRST_RANGE(adapter, off);
+
+	if (ADDR_IN_RANGE(off, SECOND_PAGE_GROUP_START, SECOND_PAGE_GROUP_END))
+		return PCI_OFFSET_SECOND_RANGE(adapter, off);
+
+	if (ADDR_IN_RANGE(off, THIRD_PAGE_GROUP_START, THIRD_PAGE_GROUP_END))
+		return PCI_OFFSET_THIRD_RANGE(adapter, off);
+
+	return NULL;
+}
+
 #define CRB_WIN_LOCK_TIMEOUT 100000000
-static crb_128M_2M_block_map_t crb_128M_2M_map[64] = {
+static crb_128M_2M_block_map_t
+crb_128M_2M_map[64] __cacheline_aligned_in_smp = {
     {{{0, 0,         0,         0} } },		/* 0: PCI */
     {{{1, 0x0100000, 0x0102000, 0x120000},	/* 1: PCIE */
 	  {1, 0x0110000, 0x0120000, 0x130000},
@@ -279,39 +319,8 @@ static unsigned crb_hub_agt[64] =
 
 /*  PCI Windowing for DDR regions.  */
 
-#define ADDR_IN_RANGE(addr, low, high)	\
-	(((addr) <= (high)) && ((addr) >= (low)))
-
 #define NETXEN_WINDOW_ONE 	0x2000000 /*CRB Window: bit 25 of CRB address */
 
-#define NETXEN_NIC_ZERO_PAUSE_ADDR     0ULL
-#define NETXEN_NIC_UNIT_PAUSE_ADDR     0x200ULL
-#define NETXEN_NIC_EPG_PAUSE_ADDR1     0x2200010000c28001ULL
-#define NETXEN_NIC_EPG_PAUSE_ADDR2     0x0100088866554433ULL
-
-#define NETXEN_NIC_WINDOW_MARGIN 0x100000
-
-int netxen_nic_set_mac(struct net_device *netdev, void *p)
-{
-	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct sockaddr *addr = p;
-
-	if (netif_running(netdev))
-		return -EBUSY;
-
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-
-	/* For P3, MAC addr is not set in NIU */
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-		if (adapter->macaddr_set)
-			adapter->macaddr_set(adapter, addr->sa_data);
-
-	return 0;
-}
-
 #define NETXEN_UNICAST_ADDR(port, index) \
 	(NETXEN_UNICAST_ADDR_BASE+(port*32)+(index*8))
 #define NETXEN_MCAST_ADDR(port, index) \
@@ -331,22 +340,20 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
 	if (adapter->mc_enabled)
 		return 0;
 
-	adapter->hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	val = NXRD32(adapter, NETXEN_MAC_ADDR_CNTL_REG);
 	val |= (1UL << (28+port));
-	adapter->hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	NXWR32(adapter, NETXEN_MAC_ADDR_CNTL_REG, val);
 
 	/* add broadcast addr to filter */
 	val = 0xffffff;
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_UNICAST_ADDR(port, 0)+4, val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0)+4, val);
 
 	/* add station addr to filter */
 	val = MAC_HI(addr);
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1), val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1), val);
 	val = MAC_LO(addr);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_UNICAST_ADDR(port, 1)+4, val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, val);
 
 	adapter->mc_enabled = 1;
 	return 0;
@@ -362,18 +369,17 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter)
 	if (!adapter->mc_enabled)
 		return 0;
 
-	adapter->hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	val = NXRD32(adapter, NETXEN_MAC_ADDR_CNTL_REG);
 	val &= ~(1UL << (28+port));
-	adapter->hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	NXWR32(adapter, NETXEN_MAC_ADDR_CNTL_REG, val);
 
 	val = MAC_HI(addr);
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
 	val = MAC_LO(addr);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_UNICAST_ADDR(port, 0)+4, val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0)+4, val);
 
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1), 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, 0);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1), 0);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, 0);
 
 	adapter->mc_enabled = 0;
 	return 0;
@@ -389,10 +395,8 @@ netxen_nic_set_mcast_addr(struct netxen_adapter *adapter,
 	lo = MAC_LO(addr);
 	hi = MAC_HI(addr);
 
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_MCAST_ADDR(port, index), hi);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_MCAST_ADDR(port, index)+4, lo);
+	NXWR32(adapter, NETXEN_MCAST_ADDR(port, index), hi);
+	NXWR32(adapter, NETXEN_MCAST_ADDR(port, index)+4, lo);
 
 	return 0;
 }
@@ -445,100 +449,58 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 		netxen_nic_set_mcast_addr(adapter, index, null_addr);
 }
 
-static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,
-		u8 *addr, nx_mac_list_t **add_list, nx_mac_list_t **del_list)
-{
-	nx_mac_list_t *cur, *prev;
-
-	/* if in del_list, move it to adapter->mac_list */
-	for (cur = *del_list, prev = NULL; cur;) {
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
-			if (prev == NULL)
-				*del_list = cur->next;
-			else
-				prev->next = cur->next;
-			cur->next = adapter->mac_list;
-			adapter->mac_list = cur;
-			return 0;
-		}
-		prev = cur;
-		cur = cur->next;
-	}
-
-	/* make sure to add each mac address only once */
-	for (cur = adapter->mac_list; cur; cur = cur->next) {
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
-			return 0;
-	}
-	/* not in del_list, create new entry and add to add_list */
-	cur = kmalloc(sizeof(*cur), in_atomic()? GFP_ATOMIC : GFP_KERNEL);
-	if (cur == NULL) {
-		printk(KERN_ERR "%s: cannot allocate memory. MAC filtering may"
-				"not work properly from now.\n", __func__);
-		return -1;
-	}
-
-	memcpy(cur->mac_addr, addr, ETH_ALEN);
-	cur->next = *add_list;
-	*add_list = cur;
-	return 0;
-}
-
 static int
 netxen_send_cmd_descs(struct netxen_adapter *adapter,
-		struct cmd_desc_type0 *cmd_desc_arr, int nr_elements)
+		struct cmd_desc_type0 *cmd_desc_arr, int nr_desc)
 {
-	uint32_t i, producer;
+	u32 i, producer, consumer;
 	struct netxen_cmd_buffer *pbuf;
 	struct cmd_desc_type0 *cmd_desc;
-
-	if (nr_elements > MAX_PENDING_DESC_BLOCK_SIZE || nr_elements == 0) {
-		printk(KERN_WARNING "%s: Too many command descriptors in a "
-			      "request\n", __func__);
-		return -EINVAL;
-	}
+	struct nx_host_tx_ring *tx_ring;
 
 	i = 0;
 
+	tx_ring = adapter->tx_ring;
 	netif_tx_lock_bh(adapter->netdev);
 
-	producer = adapter->cmd_producer;
+	producer = tx_ring->producer;
+	consumer = tx_ring->sw_consumer;
+
+	if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) {
+		netif_tx_unlock_bh(adapter->netdev);
+		return -EBUSY;
+	}
+
 	do {
 		cmd_desc = &cmd_desc_arr[i];
 
-		pbuf = &adapter->cmd_buf_arr[producer];
+		pbuf = &tx_ring->cmd_buf_arr[producer];
 		pbuf->skb = NULL;
 		pbuf->frag_count = 0;
 
-		/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
-		memcpy(&adapter->ahw.cmd_desc_head[producer],
+		memcpy(&tx_ring->desc_head[producer],
 			&cmd_desc_arr[i], sizeof(struct cmd_desc_type0));
 
-		producer = get_next_index(producer,
-				adapter->num_txd);
+		producer = get_next_index(producer, tx_ring->num_desc);
 		i++;
 
-	} while (i != nr_elements);
-
-	adapter->cmd_producer = producer;
+	} while (i != nr_desc);
 
-	/* write producer index to start the xmit */
+	tx_ring->producer = producer;
 
-	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
+	netxen_nic_update_cmd_producer(adapter, tx_ring, producer);
 
 	netif_tx_unlock_bh(adapter->netdev);
 
 	return 0;
 }
 
-static int nx_p3_sre_macaddr_change(struct net_device *dev,
-		u8 *addr, unsigned op)
+static int
+nx_p3_sre_macaddr_change(struct netxen_adapter *adapter, u8 *addr, unsigned op)
 {
-	struct netxen_adapter *adapter = netdev_priv(dev);
 	nx_nic_req_t req;
 	nx_mac_req_t *mac_req;
 	u64 word;
-	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 	req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
@@ -550,28 +512,51 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
 	mac_req->op = op;
 	memcpy(mac_req->mac_addr, addr, 6);
 
-	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
-	if (rv != 0) {
-		printk(KERN_ERR "ERROR. Could not send mac update\n");
-		return rv;
+	return netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+}
+
+static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,
+		u8 *addr, struct list_head *del_list)
+{
+	struct list_head *head;
+	nx_mac_list_t *cur;
+
+	/* look up if already exists */
+	list_for_each(head, del_list) {
+		cur = list_entry(head, nx_mac_list_t, list);
+
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
+			list_move_tail(head, &adapter->mac_list);
+			return 0;
+		}
 	}
 
-	return 0;
+	cur = kzalloc(sizeof(nx_mac_list_t), GFP_ATOMIC);
+	if (cur == NULL) {
+		printk(KERN_ERR "%s: failed to add mac address filter\n",
+				adapter->netdev->name);
+		return -ENOMEM;
+	}
+	memcpy(cur->mac_addr, addr, ETH_ALEN);
+	list_add_tail(&cur->list, &adapter->mac_list);
+	return nx_p3_sre_macaddr_change(adapter,
+				cur->mac_addr, NETXEN_MAC_ADD);
 }
 
 void netxen_p3_nic_set_multi(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u32 mode = VPORT_MISS_MODE_DROP;
+	LIST_HEAD(del_list);
+	struct list_head *head;
+	nx_mac_list_t *cur;
 
-	del_list = adapter->mac_list;
-	adapter->mac_list = NULL;
+	list_splice_tail_init(&adapter->mac_list, &del_list);
 
-	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
-	nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list);
+	nx_p3_nic_add_mac(adapter, bcast_addr, &del_list);
 
 	if (netdev->flags & IFF_PROMISC) {
 		mode = VPORT_MISS_MODE_ACCEPT_ALL;
@@ -587,25 +572,20 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	if (netdev->mc_count > 0) {
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 		     mc_ptr = mc_ptr->next) {
-			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
-					  &add_list, &del_list);
+			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr, &del_list);
 		}
 	}
 
 send_fw_cmd:
 	adapter->set_promisc(adapter, mode);
-	for (cur = del_list; cur;) {
-		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
-		next = cur->next;
+	head = &del_list;
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, nx_mac_list_t, list);
+
+		nx_p3_sre_macaddr_change(adapter,
+				cur->mac_addr, NETXEN_MAC_DEL);
+		list_del(&cur->list);
 		kfree(cur);
-		cur = next;
-	}
-	for (cur = add_list; cur;) {
-		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_ADD);
-		next = cur->next;
-		cur->next = adapter->mac_list;
-		adapter->mac_list = cur;
-		cur = next;
 	}
 }
 
@@ -630,17 +610,25 @@ int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 
 void netxen_p3_free_mac_list(struct netxen_adapter *adapter)
 {
-	nx_mac_list_t *cur, *next;
-
-	cur = adapter->mac_list;
-
-	while (cur) {
-		next = cur->next;
+	nx_mac_list_t *cur;
+	struct list_head *head = &adapter->mac_list;
+
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, nx_mac_list_t, list);
+		nx_p3_sre_macaddr_change(adapter,
+				cur->mac_addr, NETXEN_MAC_DEL);
+		list_del(&cur->list);
 		kfree(cur);
-		cur = next;
 	}
 }
 
+int netxen_p3_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
+{
+	/* assuming caller has already copied new addr to netdev */
+	netxen_p3_nic_set_multi(adapter->netdev);
+	return 0;
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
@@ -717,6 +705,28 @@ int netxen_config_rss(struct netxen_adapter *adapter, int enable)
 	return rv;
 }
 
+int netxen_linkevent_request(struct netxen_adapter *adapter, int enable)
+{
+	nx_nic_req_t req;
+	u64 word;
+	int rv;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+	req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+	word = NX_NIC_H2C_OPCODE_GET_LINKEVENT | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+	req.words[0] = cpu_to_le64(enable | (enable << 8));
+
+	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0) {
+		printk(KERN_ERR "%s: could not configure link notification\n",
+				adapter->netdev->name);
+	}
+
+	return rv;
+}
+
 /*
  * netxen_nic_change_mtu - Change the Maximum Transfer Unit
  * @returns 0 on success, negative on failure
@@ -812,8 +822,8 @@ int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 	crbaddr = CRB_MAC_BLOCK_START +
 		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
 
-	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
-	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
+	mac_lo = NXRD32(adapter, crbaddr);
+	mac_hi = NXRD32(adapter, crbaddr+4);
 
 	if (pci_func & 1)
 		*mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
@@ -831,8 +841,7 @@ static int crb_win_lock(struct netxen_adapter *adapter)
 
 	while (!done) {
 		/* acquire semaphore3 from PCI HW block */
-		adapter->hw_read_wx(adapter,
-				NETXEN_PCIE_REG(PCIE_SEM7_LOCK), &done, 4);
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM7_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= CRB_WIN_LOCK_TIMEOUT)
@@ -840,8 +849,7 @@ static int crb_win_lock(struct netxen_adapter *adapter)
 		timeout++;
 		udelay(1);
 	}
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_CRB_WIN_LOCK_ID, adapter->portnum);
+	NXWR32(adapter, NETXEN_CRB_WIN_LOCK_ID, adapter->portnum);
 	return 0;
 }
 
@@ -849,8 +857,7 @@ static void crb_win_unlock(struct netxen_adapter *adapter)
 {
 	int val;
 
-	adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_SEM7_UNLOCK), &val, 4);
+	val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM7_UNLOCK));
 }
 
 /*
@@ -907,17 +914,15 @@ netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter, u32 wndw)
  * In: 'off' is offset from base in 128M pci map
  */
 static int
-netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
-		ulong *off, int len)
+netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter, ulong *off)
 {
-	unsigned long end = *off + len;
 	crb_128M_2M_sub_block_map_t *m;
 
 
 	if (*off >= NETXEN_CRB_MAX)
 		return -1;
 
-	if (*off >= NETXEN_PCI_CAMQM && (end <= NETXEN_PCI_CAMQM_2M_END)) {
+	if (*off >= NETXEN_PCI_CAMQM && (*off < NETXEN_PCI_CAMQM_2M_END)) {
 		*off = (*off - NETXEN_PCI_CAMQM) + NETXEN_PCI_CAMQM_2M_BASE +
 			(ulong)adapter->ahw.pci_base0;
 		return 0;
@@ -927,14 +932,13 @@ netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
 		return -1;
 
 	*off -= NETXEN_PCI_CRBSPACE;
-	end = *off + len;
 
 	/*
 	 * Try direct map
 	 */
 	m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)];
 
-	if (m->valid && (m->start_128M <= *off) && (m->end_128M >= end)) {
+	if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) {
 		*off = *off + m->start_2M - m->start_128M +
 			(ulong)adapter->ahw.pci_base0;
 		return 0;
@@ -972,214 +976,11 @@ netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong *off)
 		(ulong)adapter->ahw.pci_base0;
 }
 
-static int
-netxen_do_load_firmware(struct netxen_adapter *adapter, const char *fwname,
-		const struct firmware *fw)
-{
-	u64 *ptr64;
-	u32 i, flashaddr, size;
-	struct pci_dev *pdev = adapter->pdev;
-
-	if (fw)
-		dev_info(&pdev->dev, "loading firmware from file %s\n", fwname);
-	else
-		dev_info(&pdev->dev, "loading firmware from flash\n");
-
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_CAS_RST, 1);
-
-	if (fw) {
-		__le64 data;
-
-		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
-
-		ptr64 = (u64 *)&fw->data[NETXEN_BOOTLD_START];
-		flashaddr = NETXEN_BOOTLD_START;
-
-		for (i = 0; i < size; i++) {
-			data = cpu_to_le64(ptr64[i]);
-			adapter->pci_mem_write(adapter, flashaddr, &data, 8);
-			flashaddr += 8;
-		}
-
-		size = *(u32 *)&fw->data[NX_FW_SIZE_OFFSET];
-		size = (__force u32)cpu_to_le32(size) / 8;
-
-		ptr64 = (u64 *)&fw->data[NETXEN_IMAGE_START];
-		flashaddr = NETXEN_IMAGE_START;
-
-		for (i = 0; i < size; i++) {
-			data = cpu_to_le64(ptr64[i]);
-
-			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 8))
-				return -EIO;
-
-			flashaddr += 8;
-		}
-	} else {
-		u32 data;
-
-		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 4;
-		flashaddr = NETXEN_BOOTLD_START;
-
-		for (i = 0; i < size; i++) {
-			if (netxen_rom_fast_read(adapter,
-					flashaddr, (int *)&data) != 0)
-				return -EIO;
-
-			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 4))
-				return -EIO;
-
-			flashaddr += 4;
-		}
-	}
-	msleep(1);
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
-	else {
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_CAS_RST, 0);
-	}
-
-	return 0;
-}
-
-static int
-netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname,
-		const struct firmware *fw)
-{
-	__le32 val;
-	u32 major, minor, build, ver, min_ver, bios;
-	struct pci_dev *pdev = adapter->pdev;
-
-	if (fw->size < NX_FW_MIN_SIZE)
-		return -EINVAL;
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
-	if ((__force u32)val != NETXEN_BDINFO_MAGIC)
-		return -EINVAL;
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
-	else
-		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
-
-	ver = NETXEN_VERSION_CODE(major, minor, build);
-
-	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
-		dev_err(&pdev->dev,
-				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, major, minor, build);
-		return -EINVAL;
-	}
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
-	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
-	if ((__force u32)val != bios) {
-		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
-				fwname);
-		return -EINVAL;
-	}
-
-	/* check if flashed firmware is newer */
-	if (netxen_rom_fast_read(adapter,
-			NX_FW_VERSION_OFFSET, (int *)&val))
-		return -EIO;
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
-		return -EINVAL;
-
-	netxen_nic_reg_write(adapter, NETXEN_CAM_RAM(0x1fc),
-			NETXEN_BDINFO_MAGIC);
-	return 0;
-}
-
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
-int netxen_load_firmware(struct netxen_adapter *adapter)
-{
-	u32 capability, flashed_ver;
-	const struct firmware *fw;
-	int fw_type;
-	struct pci_dev *pdev = adapter->pdev;
-	int rc = 0;
-
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		fw_type = NX_P2_MN_ROMIMAGE;
-		goto request_fw;
-	} else {
-		fw_type = NX_P3_CT_ROMIMAGE;
-		goto request_fw;
-	}
-
-request_mn:
-	capability = 0;
-
-	netxen_rom_fast_read(adapter,
-			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
-	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
-		adapter->hw_read_wx(adapter,
-				NX_PEG_TUNE_CAPABILITY, &capability, 4);
-		if (capability & NX_PEG_TUNE_MN_PRESENT) {
-			fw_type = NX_P3_MN_ROMIMAGE;
-			goto request_fw;
-		}
-	}
-
-request_fw:
-	rc = request_firmware(&fw, fw_name[fw_type], &pdev->dev);
-	if (rc != 0) {
-		if (fw_type == NX_P3_CT_ROMIMAGE) {
-			msleep(1);
-			goto request_mn;
-		}
-
-		fw = NULL;
-		goto load_fw;
-	}
-
-	rc = netxen_validate_firmware(adapter, fw_name[fw_type], fw);
-	if (rc != 0) {
-		release_firmware(fw);
-
-		if (fw_type == NX_P3_CT_ROMIMAGE) {
-			msleep(1);
-			goto request_mn;
-		}
-
-		fw = NULL;
-	}
-
-load_fw:
-	rc = netxen_do_load_firmware(adapter, fw_name[fw_type], fw);
-
-	if (fw)
-		release_firmware(fw);
-	return rc;
-}
-
 int
-netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter, ulong off, u32 data)
 {
 	void __iomem *addr;
 
-	BUG_ON(len != 4);
-
 	if (ADDR_IN_WINDOW1(off)) {
 		addr = NETXEN_CRB_NORMALIZE(adapter, off);
 	} else {		/* Window 0 */
@@ -1192,7 +993,7 @@ netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
 		return 1;
 	}
 
-	writel(*(u32 *) data, addr);
+	writel(data, addr);
 
 	if (!ADDR_IN_WINDOW1(off))
 		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
@@ -1200,13 +1001,11 @@ netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
 	return 0;
 }
 
-int
-netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+u32
+netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off)
 {
 	void __iomem *addr;
-
-	BUG_ON(len != 4);
+	u32 data;
 
 	if (ADDR_IN_WINDOW1(off)) {	/* Window 1 */
 		addr = NETXEN_CRB_NORMALIZE(adapter, off);
@@ -1220,24 +1019,21 @@ netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
 		return 1;
 	}
 
-	*(u32 *)data = readl(addr);
+	data = readl(addr);
 
 	if (!ADDR_IN_WINDOW1(off))
 		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
 
-	return 0;
+	return data;
 }
 
 int
-netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter, ulong off, u32 data)
 {
 	unsigned long flags = 0;
 	int rv;
 
-	BUG_ON(len != 4);
-
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off, len);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
 
 	if (rv == -1) {
 		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
@@ -1250,26 +1046,24 @@ netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
 		write_lock_irqsave(&adapter->adapter_lock, flags);
 		crb_win_lock(adapter);
 		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		writel(*(uint32_t *)data, (void __iomem *)off);
+		writel(data, (void __iomem *)off);
 		crb_win_unlock(adapter);
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	} else
-		writel(*(uint32_t *)data, (void __iomem *)off);
+		writel(data, (void __iomem *)off);
 
 
 	return 0;
 }
 
-int
-netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+u32
+netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off)
 {
 	unsigned long flags = 0;
 	int rv;
+	u32 data;
 
-	BUG_ON(len != 4);
-
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off, len);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
 
 	if (rv == -1) {
 		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
@@ -1282,47 +1076,13 @@ netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
 		write_lock_irqsave(&adapter->adapter_lock, flags);
 		crb_win_lock(adapter);
 		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		*(uint32_t *)data = readl((void __iomem *)off);
+		data = readl((void __iomem *)off);
 		crb_win_unlock(adapter);
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	} else
-		*(uint32_t *)data = readl((void __iomem *)off);
-
-	return 0;
-}
+		data = readl((void __iomem *)off);
 
-void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val)
-{
-	adapter->hw_write_wx(adapter, off, &val, 4);
-}
-
-int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off)
-{
-	int val;
-	adapter->hw_read_wx(adapter, off, &val, 4);
-	return val;
-}
-
-/* Change the window to 0, write and change back to window 1. */
-void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value)
-{
-	adapter->hw_write_wx(adapter, index, &value, 4);
-}
-
-/* Change the window to 0, read and change back to window 1. */
-void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 *value)
-{
-	adapter->hw_read_wx(adapter, index, value, 4);
-}
-
-void netxen_nic_write_w1(struct netxen_adapter *adapter, u32 index, u32 value)
-{
-	adapter->hw_write_wx(adapter, index, &value, 4);
-}
-
-void netxen_nic_read_w1(struct netxen_adapter *adapter, u32 index, u32 *value)
-{
-	adapter->hw_read_wx(adapter, index, value, 4);
+	return data;
 }
 
 /*
@@ -1425,17 +1185,6 @@ u32 netxen_nic_pci_read_immediate_128M(struct netxen_adapter *adapter, u64 off)
 	return readl((void __iomem *)(pci_base_offset(adapter, off)));
 }
 
-void netxen_nic_pci_write_normalize_128M(struct netxen_adapter *adapter,
-		u64 off, u32 data)
-{
-	writel(data, NETXEN_CRB_NORMALIZE(adapter, off));
-}
-
-u32 netxen_nic_pci_read_normalize_128M(struct netxen_adapter *adapter, u64 off)
-{
-	return readl(NETXEN_CRB_NORMALIZE(adapter, off));
-}
-
 unsigned long
 netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 		unsigned long long addr)
@@ -1447,12 +1196,10 @@ netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 		/* DDR network side */
 		window = MN_WIN(addr);
 		adapter->ahw.ddr_mn_window = window;
-		adapter->hw_write_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&window, 4);
-		adapter->hw_read_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&win_read, 4);
+		NXWR32(adapter, adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				window);
+		win_read = NXRD32(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE);
 		if ((win_read << 17) != window) {
 			printk(KERN_INFO "Written MNwin (0x%x) != "
 				"Read MNwin (0x%x)\n", window, win_read);
@@ -1467,12 +1214,10 @@ netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 
 		window = OCM_WIN(addr);
 		adapter->ahw.ddr_mn_window = window;
-		adapter->hw_write_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&window, 4);
-		adapter->hw_read_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&win_read, 4);
+		NXWR32(adapter, adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				window);
+		win_read = NXRD32(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE);
 		if ((win_read >> 7) != window) {
 			printk(KERN_INFO "%s: Written OCMwin (0x%x) != "
 					"Read OCMwin (0x%x)\n",
@@ -1485,12 +1230,10 @@ netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 		/* QDR network side */
 		window = MS_WIN(addr);
 		adapter->ahw.qdr_sn_window = window;
-		adapter->hw_write_wx(adapter,
-				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
-				&window, 4);
-		adapter->hw_read_wx(adapter,
-				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
-				&win_read, 4);
+		NXWR32(adapter, adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
+				window);
+		win_read = NXRD32(adapter,
+				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE);
 		if (win_read != window) {
 			printk(KERN_INFO "%s: Written MSwin (0x%x) != "
 					"Read MSwin (0x%x)\n",
@@ -1936,27 +1679,20 @@ netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
 
 	for (i = 0; i < loop; i++) {
 		temp = off8 + (i << 3);
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_ADDR_LO, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
 		temp = 0;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_ADDR_HI, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_ADDR_HI, temp);
 		temp = word[i] & 0xffffffff;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_WRDATA_LO, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp);
 		temp = (word[i] >> 32) & 0xffffffff;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_WRDATA_HI, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp);
 		temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_CTRL, temp);
 		temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_CTRL, temp);
 
 		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			adapter->hw_read_wx(adapter,
-					mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+			temp = NXRD32(adapter, mem_crb + MIU_TEST_AGT_CTRL);
 			if ((temp & MIU_TA_CTL_BUSY) == 0)
 				break;
 		}
@@ -2013,21 +1749,16 @@ netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 
 	for (i = 0; i < loop; i++) {
 		temp = off8 + (i << 3);
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_ADDR_LO, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
 		temp = 0;
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_ADDR_HI, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_ADDR_HI, temp);
 		temp = MIU_TA_CTL_ENABLE;
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_CTRL, temp);
 		temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE;
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_CTRL, temp);
 
 		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			adapter->hw_read_wx(adapter,
-					mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+			temp = NXRD32(adapter, mem_crb + MIU_TEST_AGT_CTRL);
 			if ((temp & MIU_TA_CTL_BUSY) == 0)
 				break;
 		}
@@ -2042,8 +1773,8 @@ netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 		start = off0[i] >> 2;
 		end   = (off0[i] + sz[i] - 1) >> 2;
 		for (k = start; k <= end; k++) {
-			adapter->hw_read_wx(adapter,
-				mem_crb + MIU_TEST_AGT_RDDATA(k), &temp, 4);
+			temp = NXRD32(adapter,
+				mem_crb + MIU_TEST_AGT_RDDATA(k));
 			word[i] |= ((uint64_t)temp << (32 * k));
 		}
 	}
@@ -2086,29 +1817,14 @@ netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
 		u64 off, u32 data)
 {
-	adapter->hw_write_wx(adapter, off, &data, 4);
+	NXWR32(adapter, off, data);
 
 	return 0;
 }
 
 u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off)
 {
-	u32 temp;
-	adapter->hw_read_wx(adapter, off, &temp, 4);
-	return temp;
-}
-
-void netxen_nic_pci_write_normalize_2M(struct netxen_adapter *adapter,
-		u64 off, u32 data)
-{
-	adapter->hw_write_wx(adapter, off, &data, 4);
-}
-
-u32 netxen_nic_pci_read_normalize_2M(struct netxen_adapter *adapter, u64 off)
-{
-	u32 temp;
-	adapter->hw_read_wx(adapter, off, &temp, 4);
-	return temp;
+	return NXRD32(adapter, off);
 }
 
 int netxen_nic_get_board_info(struct netxen_adapter *adapter)
@@ -2142,13 +1858,12 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	adapter->ahw.board_type = board_type;
 
 	if (board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
-		u32 gpio = netxen_nic_reg_read(adapter,
-				NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+		u32 gpio = NXRD32(adapter, NETXEN_ROMUSB_GLB_PAD_GPIO_I);
 		if ((gpio & 0x8000) == 0)
 			board_type = NETXEN_BRDTYPE_P3_10G_TP;
 	}
 
-	switch ((netxen_brdtype_t)board_type) {
+	switch (board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 		adapter->ahw.port_type = NETXEN_NIC_GBE;
 		break;
@@ -2195,8 +1910,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 {
 	new_mtu += MTU_FUDGE_FACTOR;
-	netxen_nic_write_w0(adapter,
-		NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
+	NXWR32(adapter, NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
 		new_mtu);
 	return 0;
 }
@@ -2205,21 +1919,12 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 {
 	new_mtu += MTU_FUDGE_FACTOR;
 	if (adapter->physical_port == 0)
-		netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
-				new_mtu);
+		NXWR32(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu);
 	else
-		netxen_nic_write_w0(adapter, NETXEN_NIU_XG1_MAX_FRAME_SIZE,
-				new_mtu);
+		NXWR32(adapter, NETXEN_NIU_XG1_MAX_FRAME_SIZE, new_mtu);
 	return 0;
 }
 
-void
-netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
-		unsigned long off, int data)
-{
-	adapter->hw_write_wx(adapter, off, &data, 4);
-}
-
 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 {
 	__u32 status;
@@ -2234,8 +1939,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 	}
 
 	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
-		adapter->hw_read_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
+		port_mode = NXRD32(adapter, NETXEN_PORT_MODE_ADDR);
 		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
 			adapter->link_speed   = SPEED_1000;
 			adapter->link_duplex  = DUPLEX_FULL;
@@ -2312,9 +2016,9 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
 		addr += sizeof(u32);
 	}
 
-	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MAJOR, &fw_major, 4);
-	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MINOR, &fw_minor, 4);
-	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_SUB, &fw_build, 4);
+	fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+	fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+	fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
 
 	adapter->fw_major = fw_major;
 	adapter->fw_version = NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build);
@@ -2337,8 +2041,7 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
 			fw_major, fw_minor, fw_build);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		adapter->hw_read_wx(adapter,
-				NETXEN_MIU_MN_CONTROL, &i, 4);
+		i = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
 		adapter->ahw.cut_through = (i & 0x4) ? 1 : 0;
 		dev_info(&pdev->dev, "firmware running in %s mode\n",
 		adapter->ahw.cut_through ? "cut-through" : "legacy");
@@ -2353,9 +2056,9 @@ netxen_nic_wol_supported(struct netxen_adapter *adapter)
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		return 0;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG_NV);
 	if (wol_cfg & (1UL << adapter->portnum)) {
-		wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG);
+		wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG);
 		if (wol_cfg & (1 << adapter->portnum))
 			return 1;
 	}
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 04b47a7993c..d4e83333978 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -36,35 +36,13 @@
 /* Hardware memory size of 128 meg */
 #define NETXEN_MEMADDR_MAX (128 * 1024 * 1024)
 
-#ifndef readq
-static inline u64 readq(void __iomem * addr)
-{
-	return readl(addr) | (((u64) readl(addr + 4)) << 32LL);
-}
-#endif
-
-#ifndef writeq
-static inline void writeq(u64 val, void __iomem * addr)
-{
-	writel(((u32) (val)), (addr));
-	writel(((u32) (val >> 32)), (addr + 4));
-}
-#endif
-
 struct netxen_adapter;
 
 #define NETXEN_PCI_MAPSIZE_BYTES  (NETXEN_PCI_MAPSIZE << 20)
 
-struct netxen_port;
 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter);
 
-typedef u8 netxen_ethernet_macaddr_t[6];
-
 /* Nibble or Byte mode for phy interface (GbE mode only) */
-typedef enum {
-	NETXEN_NIU_10_100_MB = 0,
-	NETXEN_NIU_1000_MB
-} netxen_niu_gbe_ifmode_t;
 
 #define _netxen_crb_get_bit(var, bit)  ((var >> bit) & 0x1)
 
@@ -222,30 +200,28 @@ typedef enum {
 /*
  * PHY-Specific MII control/status registers.
  */
-typedef enum {
-	NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL = 0,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS = 1,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0 = 2,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1 = 3,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG = 4,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART = 5,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE = 6,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT = 7,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE = 8,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL = 9,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS = 10,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS = 15,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL = 16,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS = 17,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE = 18,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS = 19,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE = 20,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT = 21,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL = 24,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE = 25,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET = 26,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE = 27
-} netxen_niu_phy_register_t;
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL		0
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS		1
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0		2
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1		3
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG		4
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART		5
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE	6
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT	7
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE	8
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL	9
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS	10
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS	15
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL		16
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS		17
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE		18
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS		19
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE	20
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT	21
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL		24
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE	25
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET	26
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE	27
 
 /*
  * PHY-Specific Status Register (reg 17).
@@ -417,14 +393,6 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 				       u32 mode);
 
-/* set the MAC address for a given MAC */
-int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
-			   netxen_ethernet_macaddr_t addr);
-
-/* XG version */
-int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
-			      netxen_ethernet_macaddr_t addr);
-
 /* Generic enable for GbE ports. Will detect the speed of the link. */
 int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port);
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 0759c35f16a..6f77ad58e3b 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -108,42 +108,6 @@ static void crb_addr_transform_setup(void)
 	crb_addr_transform(I2C0);
 }
 
-int netxen_init_firmware(struct netxen_adapter *adapter)
-{
-	u32 state = 0, loops = 0, err = 0;
-
-	/* Window 1 call */
-	state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
-
-	if (state == PHAN_INITIALIZE_ACK)
-		return 0;
-
-	while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) {
-		msleep(1);
-		/* Window 1 call */
-		state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
-
-		loops++;
-	}
-	if (loops >= 2000) {
-		printk(KERN_ERR "Cmd Peg initialization not complete:%x.\n",
-		       state);
-		err = -EIO;
-		return err;
-	}
-	/* Window 1 call */
-	adapter->pci_write_normalize(adapter,
-			CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
-	adapter->pci_write_normalize(adapter,
-			CRB_NIC_MSI_MODE_HOST, MSI_MODE_MULTIFUNC);
-	adapter->pci_write_normalize(adapter,
-			CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
-	adapter->pci_write_normalize(adapter,
-			CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
-
-	return err;
-}
-
 void netxen_release_rx_buffers(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
@@ -173,9 +137,10 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter)
 	struct netxen_cmd_buffer *cmd_buf;
 	struct netxen_skb_frag *buffrag;
 	int i, j;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
 
-	cmd_buf = adapter->cmd_buf_arr;
-	for (i = 0; i < adapter->num_txd; i++) {
+	cmd_buf = tx_ring->cmd_buf_arr;
+	for (i = 0; i < tx_ring->num_desc; i++) {
 		buffrag = cmd_buf->frag_array;
 		if (buffrag->dma) {
 			pci_unmap_single(adapter->pdev, buffrag->dma,
@@ -203,20 +168,27 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	int ring;
 
 	recv_ctx = &adapter->recv_ctx;
+
+	if (recv_ctx->rds_rings == NULL)
+		goto skip_rds;
+
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
-		if (rds_ring->rx_buf_arr) {
-			vfree(rds_ring->rx_buf_arr);
-			rds_ring->rx_buf_arr = NULL;
-		}
+		vfree(rds_ring->rx_buf_arr);
+		rds_ring->rx_buf_arr = NULL;
 	}
+	kfree(recv_ctx->rds_rings);
 
-	if (adapter->cmd_buf_arr)
-		vfree(adapter->cmd_buf_arr);
-	return;
+skip_rds:
+	if (adapter->tx_ring == NULL)
+		return;
+
+	tx_ring = adapter->tx_ring;
+	vfree(tx_ring->cmd_buf_arr);
 }
 
 int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
@@ -224,23 +196,45 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	struct netxen_rx_buffer *rx_buf;
-	int ring, i, num_rx_bufs;
+	int ring, i, size;
 
 	struct netxen_cmd_buffer *cmd_buf_arr;
 	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
 
-	cmd_buf_arr =
-		(struct netxen_cmd_buffer *)vmalloc(TX_BUFF_RINGSIZE(adapter));
+	size = sizeof(struct nx_host_tx_ring);
+	tx_ring = kzalloc(size, GFP_KERNEL);
+	if (tx_ring == NULL) {
+		dev_err(&pdev->dev, "%s: failed to allocate tx ring struct\n",
+		       netdev->name);
+		return -ENOMEM;
+	}
+	adapter->tx_ring = tx_ring;
+
+	tx_ring->num_desc = adapter->num_txd;
+
+	cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
 	if (cmd_buf_arr == NULL) {
-		printk(KERN_ERR "%s: Failed to allocate cmd buffer ring\n",
+		dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n",
 		       netdev->name);
 		return -ENOMEM;
 	}
-	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(adapter));
-	adapter->cmd_buf_arr = cmd_buf_arr;
+	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
+	tx_ring->cmd_buf_arr = cmd_buf_arr;
 
 	recv_ctx = &adapter->recv_ctx;
+
+	size = adapter->max_rds_rings * sizeof (struct nx_host_rds_ring);
+	rds_ring = kzalloc(size, GFP_KERNEL);
+	if (rds_ring == NULL) {
+		dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n",
+		       netdev->name);
+		return -ENOMEM;
+	}
+	recv_ctx->rds_rings = rds_ring;
+
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 		switch (ring) {
@@ -292,9 +286,8 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 		 * Now go through all of them, set reference handles
 		 * and put them in the queues.
 		 */
-		num_rx_bufs = rds_ring->num_desc;
 		rx_buf = rds_ring->rx_buf_arr;
-		for (i = 0; i < num_rx_bufs; i++) {
+		for (i = 0; i < rds_ring->num_desc; i++) {
 			list_add_tail(&rx_buf->list,
 					&rds_ring->free_list);
 			rx_buf->ref_handle = i;
@@ -307,8 +300,6 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
 		sds_ring->irq = adapter->msix_entries[ring].vector;
-		sds_ring->clean_tx = (ring == 0);
-		sds_ring->post_rxd = (ring == 0);
 		sds_ring->adapter = adapter;
 		sds_ring->num_desc = adapter->num_rxd;
 
@@ -325,13 +316,15 @@ err_out:
 
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 {
+	adapter->macaddr_set = netxen_p2_nic_set_mac_addr;
+	adapter->set_multi = netxen_p2_nic_set_multi;
+
 	switch (adapter->ahw.port_type) {
 	case NETXEN_NIC_GBE:
 		adapter->enable_phy_interrupts =
 		    netxen_niu_gbe_enable_phy_interrupts;
 		adapter->disable_phy_interrupts =
 		    netxen_niu_gbe_disable_phy_interrupts;
-		adapter->macaddr_set = netxen_niu_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_gb;
 		adapter->set_promisc = netxen_niu_set_promiscuous_mode;
 		adapter->phy_read = netxen_niu_gbe_phy_read;
@@ -345,7 +338,6 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		    netxen_niu_xgbe_enable_phy_interrupts;
 		adapter->disable_phy_interrupts =
 		    netxen_niu_xgbe_disable_phy_interrupts;
-		adapter->macaddr_set = netxen_niu_xg_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_xgb;
 		adapter->init_port = netxen_niu_xg_init_port;
 		adapter->set_promisc = netxen_niu_xg_set_promiscuous_mode;
@@ -359,6 +351,8 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		adapter->set_mtu = nx_fw_cmd_set_mtu;
 		adapter->set_promisc = netxen_p3_nic_set_promisc;
+		adapter->macaddr_set = netxen_p3_nic_set_mac_addr;
+		adapter->set_multi = netxen_p3_nic_set_multi;
 	}
 }
 
@@ -400,8 +394,7 @@ static int rom_lock(struct netxen_adapter *adapter)
 
 	while (!done) {
 		/* acquire semaphore2 from PCI HW block */
-		netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK),
-				   &done);
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= rom_lock_timeout)
@@ -418,7 +411,7 @@ static int rom_lock(struct netxen_adapter *adapter)
 				cpu_relax();	/*This a nop instr on i386 */
 		}
 	}
-	netxen_nic_reg_write(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER);
+	NXWR32(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER);
 	return 0;
 }
 
@@ -430,7 +423,7 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
 	cond_resched();
 
 	while (done == 0) {
-		done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
+		done = NXRD32(adapter, NETXEN_ROMUSB_GLB_STATUS);
 		done &= 2;
 		timeout++;
 		if (timeout >= rom_max_timeout) {
@@ -443,30 +436,28 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
 
 static void netxen_rom_unlock(struct netxen_adapter *adapter)
 {
-	u32 val;
-
 	/* release semaphore2 */
-	netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK), &val);
+	NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK));
 
 }
 
 static int do_rom_fast_read(struct netxen_adapter *adapter,
 			    int addr, int *valp)
 {
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
 	if (netxen_wait_rom_done(adapter)) {
 		printk("Error waiting for rom done\n");
 		return -EIO;
 	}
 	/* reset abyte_cnt and dummy_byte_cnt */
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
 	udelay(10);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
 
-	*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
+	*valp = NXRD32(adapter, NETXEN_ROMUSB_ROM_RDATA);
 	return 0;
 }
 
@@ -530,8 +521,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 
 	/* resetall */
 	rom_lock(adapter);
-	netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
-				    0xffffffff);
+	NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
 	netxen_rom_unlock(adapter);
 
 	if (verbose) {
@@ -655,7 +645,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			}
 		}
 
-		adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
+		NXWR32(adapter, off, buf[i].data);
 
 		msleep(init_delay);
 	}
@@ -665,36 +655,230 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 
 	/* unreset_net_cache */
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		adapter->hw_read_wx(adapter,
-				NETXEN_ROMUSB_GLB_SW_RESET, &val, 4);
-		netxen_crb_writelit_adapter(adapter,
-				NETXEN_ROMUSB_GLB_SW_RESET, (val & 0xffffff0f));
+		val = NXRD32(adapter, NETXEN_ROMUSB_GLB_SW_RESET);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, (val & 0xffffff0f));
 	}
 
 	/* p2dn replyCount */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_D + 0xec, 0x1e);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_D + 0xec, 0x1e);
 	/* disable_peg_cache 0 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_D + 0x4c, 8);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_D + 0x4c, 8);
 	/* disable_peg_cache 1 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_I + 0x4c, 8);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_I + 0x4c, 8);
 
 	/* peg_clr_all */
 
 	/* peg_clr 0 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, 0);
 	/* peg_clr 1 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, 0);
 	/* peg_clr 2 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, 0);
 	/* peg_clr 3 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, 0);
+	return 0;
+}
+
+int
+netxen_load_firmware(struct netxen_adapter *adapter)
+{
+	u64 *ptr64;
+	u32 i, flashaddr, size;
+	const struct firmware *fw = adapter->fw;
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
+
+	if (fw) {
+		__le64 data;
+
+		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
+
+		ptr64 = (u64 *)&fw->data[NETXEN_BOOTLD_START];
+		flashaddr = NETXEN_BOOTLD_START;
+
+		for (i = 0; i < size; i++) {
+			data = cpu_to_le64(ptr64[i]);
+			adapter->pci_mem_write(adapter, flashaddr, &data, 8);
+			flashaddr += 8;
+		}
+
+		size = *(u32 *)&fw->data[NX_FW_SIZE_OFFSET];
+		size = (__force u32)cpu_to_le32(size) / 8;
+
+		ptr64 = (u64 *)&fw->data[NETXEN_IMAGE_START];
+		flashaddr = NETXEN_IMAGE_START;
+
+		for (i = 0; i < size; i++) {
+			data = cpu_to_le64(ptr64[i]);
+
+			if (adapter->pci_mem_write(adapter,
+						flashaddr, &data, 8))
+				return -EIO;
+
+			flashaddr += 8;
+		}
+	} else {
+		u32 data;
+
+		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 4;
+		flashaddr = NETXEN_BOOTLD_START;
+
+		for (i = 0; i < size; i++) {
+			if (netxen_rom_fast_read(adapter,
+					flashaddr, (int *)&data) != 0)
+				return -EIO;
+
+			if (adapter->pci_mem_write(adapter,
+						flashaddr, &data, 4))
+				return -EIO;
+
+			flashaddr += 4;
+		}
+	}
+	msleep(1);
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
+	else {
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 0);
+	}
+
+	return 0;
+}
+
+static int
+netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
+{
+	__le32 val;
+	u32 major, minor, build, ver, min_ver, bios;
+	struct pci_dev *pdev = adapter->pdev;
+	const struct firmware *fw = adapter->fw;
+
+	if (fw->size < NX_FW_MIN_SIZE)
+		return -EINVAL;
+
+	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
+	if ((__force u32)val != NETXEN_BDINFO_MAGIC)
+		return -EINVAL;
+
+	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+	major = (__force u32)val & 0xff;
+	minor = ((__force u32)val >> 8) & 0xff;
+	build = (__force u32)val >> 16;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
+	else
+		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
+
+	ver = NETXEN_VERSION_CODE(major, minor, build);
+
+	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+		dev_err(&pdev->dev,
+				"%s: firmware version %d.%d.%d unsupported\n",
+				fwname, major, minor, build);
+		return -EINVAL;
+	}
+
+	val = cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
+	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
+	if ((__force u32)val != bios) {
+		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
+				fwname);
+		return -EINVAL;
+	}
+
+	/* check if flashed firmware is newer */
+	if (netxen_rom_fast_read(adapter,
+			NX_FW_VERSION_OFFSET, (int *)&val))
+		return -EIO;
+	major = (__force u32)val & 0xff;
+	minor = ((__force u32)val >> 8) & 0xff;
+	build = (__force u32)val >> 16;
+	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+		return -EINVAL;
+
+	NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 	return 0;
 }
 
+static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
+
+void netxen_request_firmware(struct netxen_adapter *adapter)
+{
+	u32 capability, flashed_ver;
+	int fw_type;
+	struct pci_dev *pdev = adapter->pdev;
+	int rc = 0;
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+		fw_type = NX_P2_MN_ROMIMAGE;
+		goto request_fw;
+	} else {
+		fw_type = NX_P3_CT_ROMIMAGE;
+		goto request_fw;
+	}
+
+request_mn:
+	capability = 0;
+
+	netxen_rom_fast_read(adapter,
+			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
+		capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
+		if (capability & NX_PEG_TUNE_MN_PRESENT) {
+			fw_type = NX_P3_MN_ROMIMAGE;
+			goto request_fw;
+		}
+	}
+
+request_fw:
+	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
+	if (rc != 0) {
+		if (fw_type == NX_P3_CT_ROMIMAGE) {
+			msleep(1);
+			goto request_mn;
+		}
+
+		adapter->fw = NULL;
+		goto done;
+	}
+
+	rc = netxen_validate_firmware(adapter, fw_name[fw_type]);
+	if (rc != 0) {
+		release_firmware(adapter->fw);
+
+		if (fw_type == NX_P3_CT_ROMIMAGE) {
+			msleep(1);
+			goto request_mn;
+		}
+
+		adapter->fw = NULL;
+		goto done;
+	}
+
+done:
+	if (adapter->fw)
+		dev_info(&pdev->dev, "loading firmware from file %s\n",
+				fw_name[fw_type]);
+	else
+		dev_info(&pdev->dev, "loading firmware from flash\n");
+}
+
+
+void
+netxen_release_firmware(struct netxen_adapter *adapter)
+{
+	if (adapter->fw)
+		release_firmware(adapter->fw);
+}
+
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 {
 	uint64_t addr;
@@ -715,12 +899,12 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 	hi = (addr >> 32) & 0xffffffff;
 	lo = addr & 0xffffffff;
 
-	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
-	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
+	NXWR32(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
+	NXWR32(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		uint32_t temp = 0;
-		adapter->hw_write_wx(adapter, CRB_HOST_DUMMY_BUF, &temp, 4);
+		NXWR32(adapter, CRB_HOST_DUMMY_BUF, temp);
 	}
 
 	return 0;
@@ -762,8 +946,7 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 
 	if (!pegtune_val) {
 		do {
-			val = adapter->pci_read_normalize(adapter,
-					CRB_CMDPEG_STATE);
+			val = NXRD32(adapter, CRB_CMDPEG_STATE);
 
 			if (val == PHAN_INITIALIZE_COMPLETE ||
 				val == PHAN_INITIALIZE_ACK)
@@ -774,7 +957,7 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 		} while (--retries);
 
 		if (!retries) {
-			pegtune_val = adapter->pci_read_normalize(adapter,
+			pegtune_val = NXRD32(adapter,
 					NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
 			printk(KERN_WARNING "netxen_phantom_init: init failed, "
 					"pegtune_val=%x\n", pegtune_val);
@@ -785,13 +968,14 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 	return 0;
 }
 
-int netxen_receive_peg_ready(struct netxen_adapter *adapter)
+static int
+netxen_receive_peg_ready(struct netxen_adapter *adapter)
 {
 	u32 val = 0;
 	int retries = 2000;
 
 	do {
-		val = adapter->pci_read_normalize(adapter, CRB_RCVPEG_STATE);
+		val = NXRD32(adapter, CRB_RCVPEG_STATE);
 
 		if (val == PHAN_PEG_RCV_INITIALIZED)
 			return 0;
@@ -809,6 +993,93 @@ int netxen_receive_peg_ready(struct netxen_adapter *adapter)
 	return 0;
 }
 
+int netxen_init_firmware(struct netxen_adapter *adapter)
+{
+	int err;
+
+	err = netxen_receive_peg_ready(adapter);
+	if (err)
+		return err;
+
+	NXWR32(adapter, CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
+	NXWR32(adapter, CRB_NIC_MSI_MODE_HOST, MSI_MODE_MULTIFUNC);
+	NXWR32(adapter, CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
+	NXWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
+
+	if (adapter->fw_version >= NETXEN_VERSION_CODE(4, 0, 222)) {
+		adapter->capabilities = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
+	}
+
+	return err;
+}
+
+static void
+netxen_handle_linkevent(struct netxen_adapter *adapter, nx_fw_msg_t *msg)
+{
+	u32 cable_OUI;
+	u16 cable_len;
+	u16 link_speed;
+	u8  link_status, module, duplex, autoneg;
+	struct net_device *netdev = adapter->netdev;
+
+	adapter->has_link_events = 1;
+
+	cable_OUI = msg->body[1] & 0xffffffff;
+	cable_len = (msg->body[1] >> 32) & 0xffff;
+	link_speed = (msg->body[1] >> 48) & 0xffff;
+
+	link_status = msg->body[2] & 0xff;
+	duplex = (msg->body[2] >> 16) & 0xff;
+	autoneg = (msg->body[2] >> 24) & 0xff;
+
+	module = (msg->body[2] >> 8) & 0xff;
+	if (module == LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE) {
+		printk(KERN_INFO "%s: unsupported cable: OUI 0x%x, length %d\n",
+				netdev->name, cable_OUI, cable_len);
+	} else if (module == LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN) {
+		printk(KERN_INFO "%s: unsupported cable length %d\n",
+				netdev->name, cable_len);
+	}
+
+	netxen_advert_link_change(adapter, link_status);
+
+	/* update link parameters */
+	if (duplex == LINKEVENT_FULL_DUPLEX)
+		adapter->link_duplex = DUPLEX_FULL;
+	else
+		adapter->link_duplex = DUPLEX_HALF;
+	adapter->module_type = module;
+	adapter->link_autoneg = autoneg;
+	adapter->link_speed = link_speed;
+}
+
+static void
+netxen_handle_fw_message(int desc_cnt, int index,
+		struct nx_host_sds_ring *sds_ring)
+{
+	nx_fw_msg_t msg;
+	struct status_desc *desc;
+	int i = 0, opcode;
+
+	while (desc_cnt > 0 && i < 8) {
+		desc = &sds_ring->desc_head[index];
+		msg.words[i++] = le64_to_cpu(desc->status_desc_data[0]);
+		msg.words[i++] = le64_to_cpu(desc->status_desc_data[1]);
+
+		index = get_next_index(index, sds_ring->num_desc);
+		desc_cnt--;
+	}
+
+	opcode = netxen_get_nic_msg_opcode(msg.body[0]);
+	switch (opcode) {
+	case NX_NIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE:
+		netxen_handle_linkevent(sds_ring->adapter, &msg);
+		break;
+	default:
+		break;
+	}
+}
+
 static int
 netxen_alloc_rx_skb(struct netxen_adapter *adapter,
 		struct nx_host_rds_ring *rds_ring,
@@ -874,7 +1145,8 @@ no_skb:
 
 static struct netxen_rx_buffer *
 netxen_process_rcv(struct netxen_adapter *adapter,
-		int ring, int index, int length, int cksum, int pkt_offset)
+		int ring, int index, int length, int cksum, int pkt_offset,
+		struct nx_host_sds_ring *sds_ring)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
@@ -902,7 +1174,7 @@ netxen_process_rcv(struct netxen_adapter *adapter,
 
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	netif_receive_skb(skb);
+	napi_gro_receive(&sds_ring->napi, skb);
 
 	adapter->stats.no_rcv++;
 	adapter->stats.rxbytes += length;
@@ -927,35 +1199,53 @@ netxen_process_rcv_ring(struct nx_host_sds_ring *sds_ring, int max)
 
 	int count = 0;
 	u64 sts_data;
-	int opcode, ring, index, length, cksum, pkt_offset;
+	int opcode, ring, index, length, cksum, pkt_offset, desc_cnt;
 
 	while (count < max) {
 		desc = &sds_ring->desc_head[consumer];
-		sts_data = le64_to_cpu(desc->status_desc_data);
+		sts_data = le64_to_cpu(desc->status_desc_data[0]);
 
 		if (!(sts_data & STATUS_OWNER_HOST))
 			break;
 
+		desc_cnt = netxen_get_sts_desc_cnt(sts_data);
 		ring   = netxen_get_sts_type(sts_data);
+
 		if (ring > RCV_RING_JUMBO)
-			continue;
+			goto skip;
 
 		opcode = netxen_get_sts_opcode(sts_data);
 
+		switch (opcode) {
+		case NETXEN_NIC_RXPKT_DESC:
+		case NETXEN_OLD_RXPKT_DESC:
+			break;
+		case NETXEN_NIC_RESPONSE_DESC:
+			netxen_handle_fw_message(desc_cnt, consumer, sds_ring);
+		default:
+			goto skip;
+		}
+
+		WARN_ON(desc_cnt > 1);
+
 		index  = netxen_get_sts_refhandle(sts_data);
 		length = netxen_get_sts_totallength(sts_data);
 		cksum  = netxen_get_sts_status(sts_data);
 		pkt_offset = netxen_get_sts_pkt_offset(sts_data);
 
 		rxbuf = netxen_process_rcv(adapter, ring, index,
-				length, cksum, pkt_offset);
+				length, cksum, pkt_offset, sds_ring);
 
 		if (rxbuf)
 			list_add_tail(&rxbuf->list, &sds_ring->free_list[ring]);
 
-		desc->status_desc_data = cpu_to_le64(STATUS_OWNER_PHANTOM);
-
-		consumer = get_next_index(consumer, sds_ring->num_desc);
+skip:
+		for (; desc_cnt > 0; desc_cnt--) {
+			desc = &sds_ring->desc_head[consumer];
+			desc->status_desc_data[0] =
+				cpu_to_le64(STATUS_OWNER_PHANTOM);
+			consumer = get_next_index(consumer, sds_ring->num_desc);
+		}
 		count++;
 	}
 
@@ -980,8 +1270,7 @@ netxen_process_rcv_ring(struct nx_host_sds_ring *sds_ring, int max)
 
 	if (count) {
 		sds_ring->consumer = consumer;
-		adapter->pci_write_normalize(adapter,
-				sds_ring->crb_sts_consumer, consumer);
+		NXWR32(adapter, sds_ring->crb_sts_consumer, consumer);
 	}
 
 	return count;
@@ -990,23 +1279,24 @@ netxen_process_rcv_ring(struct nx_host_sds_ring *sds_ring, int max)
 /* Process Command status ring */
 int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 {
-	u32 last_consumer, consumer;
+	u32 sw_consumer, hw_consumer;
 	int count = 0, i;
 	struct netxen_cmd_buffer *buffer;
 	struct pci_dev *pdev = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_skb_frag *frag;
 	int done = 0;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
 
 	if (!spin_trylock(&adapter->tx_clean_lock))
 		return 1;
 
-	last_consumer = adapter->last_cmd_consumer;
-	barrier(); /* cmd_consumer can change underneath */
-	consumer = le32_to_cpu(*(adapter->cmd_consumer));
+	sw_consumer = tx_ring->sw_consumer;
+	barrier(); /* hw_consumer can change underneath */
+	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
 
-	while (last_consumer != consumer) {
-		buffer = &adapter->cmd_buf_arr[last_consumer];
+	while (sw_consumer != hw_consumer) {
+		buffer = &tx_ring->cmd_buf_arr[sw_consumer];
 		if (buffer->skb) {
 			frag = &buffer->frag_array[0];
 			pci_unmap_single(pdev, frag->dma, frag->length,
@@ -1024,16 +1314,16 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 			buffer->skb = NULL;
 		}
 
-		last_consumer = get_next_index(last_consumer,
-					       adapter->num_txd);
+		sw_consumer = get_next_index(sw_consumer, tx_ring->num_desc);
 		if (++count >= MAX_STATUS_HANDLE)
 			break;
 	}
 
-	if (count) {
-		adapter->last_cmd_consumer = last_consumer;
+	tx_ring->sw_consumer = sw_consumer;
+
+	if (count && netif_running(netdev)) {
 		smp_mb();
-		if (netif_queue_stopped(netdev) && netif_running(netdev)) {
+		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
 			netif_tx_lock(netdev);
 			netif_wake_queue(netdev);
 			smp_mb();
@@ -1053,9 +1343,9 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 	 * There is still a possible race condition and the host could miss an
 	 * interrupt. The card has to take care of this.
 	 */
-	barrier(); /* cmd_consumer can change underneath */
-	consumer = le32_to_cpu(*(adapter->cmd_consumer));
-	done = (last_consumer == consumer);
+	barrier(); /* hw_consumer can change underneath */
+	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
+	done = (sw_consumer == hw_consumer);
 	spin_unlock(&adapter->tx_clean_lock);
 
 	return (done);
@@ -1099,8 +1389,7 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid,
 
 	if (count) {
 		rds_ring->producer = producer;
-		adapter->pci_write_normalize(adapter,
-				rds_ring->crb_rcv_producer,
+		NXWR32(adapter, rds_ring->crb_rcv_producer,
 				(producer-1) & (rds_ring->num_desc-1));
 
 		if (adapter->fw_major < 4) {
@@ -1160,10 +1449,8 @@ netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 
 	if (count) {
 		rds_ring->producer = producer;
-		adapter->pci_write_normalize(adapter,
-			rds_ring->crb_rcv_producer,
+		NXWR32(adapter, rds_ring->crb_rcv_producer,
 				(producer - 1) & (rds_ring->num_desc - 1));
-			wmb();
 	}
 	spin_unlock(&rds_ring->lock);
 }
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index aef77289bd3..98737ef7293 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -29,7 +29,7 @@
  */
 
 #include <linux/vmalloc.h>
-#include <linux/highmem.h>
+#include <linux/interrupt.h>
 #include "netxen_nic_hw.h"
 
 #include "netxen_nic.h"
@@ -107,10 +107,9 @@ static uint32_t crb_cmd_producer[4] = {
 
 void
 netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-		uint32_t crb_producer)
+		struct nx_host_tx_ring *tx_ring, u32 producer)
 {
-	adapter->pci_write_normalize(adapter,
-			adapter->crb_addr_cmd_producer, crb_producer);
+	NXWR32(adapter, tx_ring->crb_cmd_producer, producer);
 }
 
 static uint32_t crb_cmd_consumer[4] = {
@@ -120,10 +119,9 @@ static uint32_t crb_cmd_consumer[4] = {
 
 static inline void
 netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
-		u32 crb_consumer)
+		struct nx_host_tx_ring *tx_ring, u32 consumer)
 {
-	adapter->pci_write_normalize(adapter,
-			adapter->crb_addr_cmd_consumer, crb_consumer);
+	NXWR32(adapter, tx_ring->crb_cmd_consumer, consumer);
 }
 
 static uint32_t msi_tgt_status[8] = {
@@ -139,37 +137,54 @@ static inline void netxen_nic_disable_int(struct nx_host_sds_ring *sds_ring)
 {
 	struct netxen_adapter *adapter = sds_ring->adapter;
 
-	adapter->pci_write_normalize(adapter, sds_ring->crb_intr_mask, 0);
+	NXWR32(adapter, sds_ring->crb_intr_mask, 0);
 }
 
 static inline void netxen_nic_enable_int(struct nx_host_sds_ring *sds_ring)
 {
 	struct netxen_adapter *adapter = sds_ring->adapter;
 
-	adapter->pci_write_normalize(adapter, sds_ring->crb_intr_mask, 0x1);
+	NXWR32(adapter, sds_ring->crb_intr_mask, 0x1);
 
 	if (!NETXEN_IS_MSI_FAMILY(adapter))
 		adapter->pci_write_immediate(adapter,
 				adapter->legacy_intr.tgt_mask_reg, 0xfbff);
 }
 
+static int
+netxen_alloc_sds_rings(struct netxen_recv_context *recv_ctx, int count)
+{
+	int size = sizeof(struct nx_host_sds_ring) * count;
+
+	recv_ctx->sds_rings = kzalloc(size, GFP_KERNEL);
+
+	return (recv_ctx->sds_rings == NULL);
+}
+
 static void
+netxen_free_sds_rings(struct netxen_recv_context *recv_ctx)
+{
+	if (recv_ctx->sds_rings != NULL)
+		kfree(recv_ctx->sds_rings);
+}
+
+static int
 netxen_napi_add(struct netxen_adapter *adapter, struct net_device *netdev)
 {
 	int ring;
 	struct nx_host_sds_ring *sds_ring;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
-	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
-		adapter->max_sds_rings = (num_online_cpus() >= 4) ? 4 : 2;
-	else
-		adapter->max_sds_rings = 1;
+	if (netxen_alloc_sds_rings(recv_ctx, adapter->max_sds_rings))
+		return 1;
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
 		netif_napi_add(netdev, &sds_ring->napi,
 				netxen_nic_poll, NETXEN_NETDEV_WEIGHT);
 	}
+
+	return 0;
 }
 
 static void
@@ -195,8 +210,9 @@ netxen_napi_disable(struct netxen_adapter *adapter)
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
-		netxen_nic_disable_int(sds_ring);
 		napi_disable(&sds_ring->napi);
+		netxen_nic_disable_int(sds_ring);
+		synchronize_irq(sds_ring->irq);
 	}
 }
 
@@ -240,7 +256,7 @@ nx_update_dma_mask(struct netxen_adapter *adapter)
 
 	change = 0;
 
-	shift = netxen_nic_reg_read(adapter, CRB_DMA_SHIFT);
+	shift = NXRD32(adapter, CRB_DMA_SHIFT);
 	if (shift >= 32)
 		return 0;
 
@@ -268,10 +284,21 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	else if (adapter->ahw.port_type == NETXEN_NIC_GBE)
 		adapter->num_rxd = MAX_RCV_DESCRIPTORS_1G;
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+	adapter->msix_supported = 0;
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		adapter->msix_supported = !!use_msi_x;
-	else
-		adapter->msix_supported = 0;
+		adapter->rss_supported = !!use_msi_x;
+	} else if (adapter->fw_version >= NETXEN_VERSION_CODE(3, 4, 336)) {
+		switch (adapter->ahw.board_type) {
+		case NETXEN_BRDTYPE_P2_SB31_10G:
+		case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+			adapter->msix_supported = !!use_msi_x;
+			adapter->rss_supported = !!use_msi_x;
+			break;
+		default:
+			break;
+		}
+	}
 
 	adapter->num_txd = MAX_CMD_DESCRIPTORS_HOST;
 	adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS;
@@ -287,43 +314,34 @@ netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
 
 	if (first_boot == 0x55555555) {
 		/* This is the first boot after power up */
-		adapter->pci_write_normalize(adapter,
-			NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+		NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 
 		if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
 			return 0;
 
 		/* PCI bus master workaround */
-		adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(0x4), &first_boot, 4);
+		first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4));
 		if (!(first_boot & 0x4)) {
 			first_boot |= 0x4;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PCIE_REG(0x4), &first_boot, 4);
-			adapter->hw_read_wx(adapter,
-				NETXEN_PCIE_REG(0x4), &first_boot, 4);
+			NXWR32(adapter, NETXEN_PCIE_REG(0x4), first_boot);
+			first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4));
 		}
 
 		/* This is the first boot after power up */
-		adapter->hw_read_wx(adapter,
-			NETXEN_ROMUSB_GLB_SW_RESET, &first_boot, 4);
+		first_boot = NXRD32(adapter, NETXEN_ROMUSB_GLB_SW_RESET);
 		if (first_boot != 0x80000f) {
 			/* clear the register for future unloads/loads */
-			adapter->pci_write_normalize(adapter,
-					NETXEN_CAM_RAM(0x1fc), 0);
+			NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), 0);
 			return -EIO;
 		}
 
 		/* Start P2 boot loader */
-		val = adapter->pci_read_normalize(adapter,
-				NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+		val = NXRD32(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
 		timeout = 0;
 		do {
 			msleep(1);
-			val = adapter->pci_read_normalize(adapter,
-					NETXEN_CAM_RAM(0x1fc));
+			val = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
 
 			if (++timeout > 5000)
 				return -EIO;
@@ -342,24 +360,19 @@ static void netxen_set_port_mode(struct netxen_adapter *adapter)
 		(val == NETXEN_BRDTYPE_P3_XG_LOM)) {
 		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
 			data = NETXEN_PORT_MODE_802_3_AP;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else if (port_mode == NETXEN_PORT_MODE_XG) {
 			data = NETXEN_PORT_MODE_XG;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_1G) {
 			data = NETXEN_PORT_MODE_AUTO_NEG_1G;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_XG) {
 			data = NETXEN_PORT_MODE_AUTO_NEG_XG;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else {
 			data = NETXEN_PORT_MODE_AUTO_NEG;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		}
 
 		if ((wol_port_mode != NETXEN_PORT_MODE_802_3_AP) &&
@@ -368,8 +381,7 @@ static void netxen_set_port_mode(struct netxen_adapter *adapter)
 			(wol_port_mode != NETXEN_PORT_MODE_AUTO_NEG_XG)) {
 			wol_port_mode = NETXEN_PORT_MODE_AUTO_NEG;
 		}
-		adapter->hw_write_wx(adapter, NETXEN_WOL_PORT_MODE,
-			&wol_port_mode, 4);
+		NXWR32(adapter, NETXEN_WOL_PORT_MODE, wol_port_mode);
 	}
 }
 
@@ -389,11 +401,11 @@ static void netxen_set_msix_bit(struct pci_dev *pdev, int enable)
 	}
 }
 
-static void netxen_init_msix_entries(struct netxen_adapter *adapter)
+static void netxen_init_msix_entries(struct netxen_adapter *adapter, int count)
 {
 	int i;
 
-	for (i = 0; i < MSIX_ENTRIES_PER_ADAPTER; i++)
+	for (i = 0; i < count; i++)
 		adapter->msix_entries[i].entry = i;
 }
 
@@ -424,20 +436,38 @@ netxen_read_mac_addr(struct netxen_adapter *adapter)
 
 	if (!is_valid_ether_addr(netdev->perm_addr))
 		dev_warn(&pdev->dev, "Bad MAC address %pM.\n", netdev->dev_addr);
-	else
-		adapter->macaddr_set(adapter, netdev->dev_addr);
 
 	return 0;
 }
 
+int netxen_nic_set_mac(struct net_device *netdev, void *p)
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	if (netif_running(netdev)) {
+		netif_device_detach(netdev);
+		netxen_napi_disable(adapter);
+	}
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	adapter->macaddr_set(adapter, addr->sa_data);
+
+	if (netif_running(netdev)) {
+		netif_device_attach(netdev);
+		netxen_napi_enable(adapter);
+	}
+	return 0;
+}
+
 static void netxen_set_multicast_list(struct net_device *dev)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		netxen_p3_nic_set_multi(dev);
-	else
-		netxen_p2_nic_set_multi(dev);
+	adapter->set_multi(dev);
 }
 
 static const struct net_device_ops netxen_netdev_ops = {
@@ -460,10 +490,17 @@ netxen_setup_intr(struct netxen_adapter *adapter)
 {
 	struct netxen_legacy_intr_set *legacy_intrp;
 	struct pci_dev *pdev = adapter->pdev;
+	int err, num_msix;
+
+	if (adapter->rss_supported) {
+		num_msix = (num_online_cpus() >= MSIX_ENTRIES_PER_ADAPTER) ?
+			MSIX_ENTRIES_PER_ADAPTER : 2;
+	} else
+		num_msix = 1;
+
+	adapter->max_sds_rings = 1;
 
 	adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
-	adapter->intr_scheme = -1;
-	adapter->msi_mode = -1;
 
 	if (adapter->ahw.revision_id >= NX_P3_B0)
 		legacy_intrp = &legacy_intr[adapter->ahw.pci_func];
@@ -478,24 +515,36 @@ netxen_setup_intr(struct netxen_adapter *adapter)
 
 	if (adapter->msix_supported) {
 
-		netxen_init_msix_entries(adapter);
-		if (pci_enable_msix(pdev, adapter->msix_entries,
-					MSIX_ENTRIES_PER_ADAPTER))
-			goto request_msi;
+		netxen_init_msix_entries(adapter, num_msix);
+		err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
+		if (err == 0) {
+			adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
+			netxen_set_msix_bit(pdev, 1);
 
-		adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
-		netxen_set_msix_bit(pdev, 1);
-		dev_info(&pdev->dev, "using msi-x interrupts\n");
+			if (adapter->rss_supported)
+				adapter->max_sds_rings = num_msix;
 
-	} else {
-request_msi:
-		if (use_msi && !pci_enable_msi(pdev)) {
-			adapter->flags |= NETXEN_NIC_MSI_ENABLED;
-			dev_info(&pdev->dev, "using msi interrupts\n");
-		} else
-			dev_info(&pdev->dev, "using legacy interrupts\n");
+			dev_info(&pdev->dev, "using msi-x interrupts\n");
+			return;
+		}
+
+		if (err > 0)
+			pci_disable_msix(pdev);
+
+		/* fall through for msi */
+	}
+
+	if (use_msi && !pci_enable_msi(pdev)) {
+		adapter->flags |= NETXEN_NIC_MSI_ENABLED;
+		adapter->msi_tgt_status =
+			msi_tgt_status[adapter->ahw.pci_func];
+		dev_info(&pdev->dev, "using msi interrupts\n");
 		adapter->msix_entries[0].vector = pdev->irq;
+		return;
 	}
+
+	dev_info(&pdev->dev, "using legacy interrupts\n");
+	adapter->msix_entries[0].vector = pdev->irq;
 }
 
 static void
@@ -552,8 +601,6 @@ netxen_setup_pci_map(struct netxen_adapter *adapter)
 	adapter->hw_read_wx = netxen_nic_hw_read_wx_128M;
 	adapter->pci_read_immediate = netxen_nic_pci_read_immediate_128M;
 	adapter->pci_write_immediate = netxen_nic_pci_write_immediate_128M;
-	adapter->pci_read_normalize = netxen_nic_pci_read_normalize_128M;
-	adapter->pci_write_normalize = netxen_nic_pci_write_normalize_128M;
 	adapter->pci_set_window = netxen_nic_pci_set_window_128M;
 	adapter->pci_mem_read = netxen_nic_pci_mem_read_128M;
 	adapter->pci_mem_write = netxen_nic_pci_mem_write_128M;
@@ -575,9 +622,6 @@ netxen_setup_pci_map(struct netxen_adapter *adapter)
 		adapter->pci_read_immediate = netxen_nic_pci_read_immediate_2M;
 		adapter->pci_write_immediate =
 			netxen_nic_pci_write_immediate_2M;
-		adapter->pci_read_normalize = netxen_nic_pci_read_normalize_2M;
-		adapter->pci_write_normalize =
-			netxen_nic_pci_write_normalize_2M;
 		adapter->pci_set_window = netxen_nic_pci_set_window_2M;
 		adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
 		adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
@@ -643,25 +687,22 @@ err_out:
 }
 
 static int
-netxen_start_firmware(struct netxen_adapter *adapter)
+netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
 {
 	int val, err, first_boot;
 	struct pci_dev *pdev = adapter->pdev;
 
 	int first_driver = 0;
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		if (adapter->ahw.pci_func == 0)
-			first_driver = 1;
-	} else {
-		if (adapter->portnum == 0)
-			first_driver = 1;
-	}
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		first_driver = (adapter->portnum == 0);
+	else
+		first_driver = (adapter->ahw.pci_func == 0);
 
 	if (!first_driver)
 		return 0;
 
-	first_boot = adapter->pci_read_normalize(adapter,
-			NETXEN_CAM_RAM(0x1fc));
+	first_boot = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
 
 	err = netxen_check_hw_init(adapter, first_boot);
 	if (err) {
@@ -669,14 +710,16 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 		return err;
 	}
 
+	if (request_fw)
+		netxen_request_firmware(adapter);
+
 	if (first_boot != 0x55555555) {
-		adapter->pci_write_normalize(adapter,
-					CRB_CMDPEG_STATE, 0);
+		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
 		netxen_pinit_from_rom(adapter, 0);
 		msleep(1);
 	}
 
-	netxen_nic_reg_write(adapter, CRB_DMA_SHIFT, 0x55555555);
+	NXWR32(adapter, CRB_DMA_SHIFT, 0x55555555);
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		netxen_set_port_mode(adapter);
 
@@ -688,8 +731,7 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 		val = 0x7654;
 		if (adapter->ahw.port_type == NETXEN_NIC_XGBE)
 			val |= 0x0f000000;
-		netxen_crb_writelit_adapter(adapter,
-				NETXEN_MAC_ADDR_CNTL_REG, val);
+		NXWR32(adapter, NETXEN_MAC_ADDR_CNTL_REG, val);
 
 	}
 
@@ -703,7 +745,7 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 	val = (_NETXEN_NIC_LINUX_MAJOR << 16)
 		| ((_NETXEN_NIC_LINUX_MINOR << 8))
 		| (_NETXEN_NIC_LINUX_SUBVERSION);
-	adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, val);
+	NXWR32(adapter, CRB_DRIVER_VERSION, val);
 
 	/* Handshake with the card before we register the devices. */
 	err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
@@ -726,15 +768,6 @@ netxen_nic_request_irq(struct netxen_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
-	if ((adapter->msi_mode != MSI_MODE_MULTIFUNC) ||
-		(adapter->intr_scheme != INTR_SCHEME_PERPORT)) {
-		printk(KERN_ERR "%s: Firmware interrupt scheme is "
-				"incompatible with driver\n",
-				netdev->name);
-		adapter->driver_mismatch = 1;
-		return -EINVAL;
-	}
-
 	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
 		handler = netxen_msix_intr;
 	else if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
@@ -747,7 +780,7 @@ netxen_nic_request_irq(struct netxen_adapter *adapter)
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
-		sprintf(sds_ring->name, "%16s[%d]", netdev->name, ring);
+		sprintf(sds_ring->name, "%s[%d]", netdev->name, ring);
 		err = request_irq(sds_ring->irq, handler,
 				  flags, sds_ring->name, sds_ring);
 		if (err)
@@ -782,22 +815,26 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 				netxen_nic_driver_name, adapter->portnum);
 		return err;
 	}
-	adapter->macaddr_set(adapter, netdev->dev_addr);
-
-	netxen_nic_set_link_parameters(adapter);
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		adapter->macaddr_set(adapter, netdev->dev_addr);
 
-	netxen_set_multicast_list(netdev);
-	if (adapter->set_mtu)
-		adapter->set_mtu(adapter, netdev->mtu);
+	adapter->set_multi(netdev);
+	adapter->set_mtu(adapter, netdev->mtu);
 
 	adapter->ahw.linkup = 0;
-	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	netxen_napi_enable(adapter);
 
 	if (adapter->max_sds_rings > 1)
 		netxen_config_rss(adapter, 1);
 
+	if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
+		netxen_linkevent_request(adapter, 1);
+	else
+		netxen_nic_set_link_parameters(adapter);
+
+	mod_timer(&adapter->watchdog_timer, jiffies);
+
 	return 0;
 }
 
@@ -806,11 +843,15 @@ netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
 {
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
-	netxen_napi_disable(adapter);
 
 	if (adapter->stop_port)
 		adapter->stop_port(adapter);
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		netxen_p3_free_mac_list(adapter);
+
+	netxen_napi_disable(adapter);
+
 	netxen_release_tx_buffers(adapter);
 
 	FLUSH_SCHEDULED_WORK();
@@ -825,6 +866,7 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	struct pci_dev *pdev = adapter->pdev;
 	int err, ring;
 	struct nx_host_rds_ring *rds_ring;
+	struct nx_host_tx_ring *tx_ring;
 
 	err = netxen_init_firmware(adapter);
 	if (err != 0) {
@@ -854,13 +896,12 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	}
 
 	if (adapter->fw_major < 4) {
-		adapter->crb_addr_cmd_producer =
-			crb_cmd_producer[adapter->portnum];
-		adapter->crb_addr_cmd_consumer =
-			crb_cmd_consumer[adapter->portnum];
+		tx_ring = adapter->tx_ring;
+		tx_ring->crb_cmd_producer = crb_cmd_producer[adapter->portnum];
+		tx_ring->crb_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 
-		netxen_nic_update_cmd_producer(adapter, 0);
-		netxen_nic_update_cmd_consumer(adapter, 0);
+		netxen_nic_update_cmd_producer(adapter, tx_ring, 0);
+		netxen_nic_update_cmd_consumer(adapter, tx_ring, 0);
 	}
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
@@ -889,10 +930,9 @@ err_out_free_sw:
 static void
 netxen_nic_detach(struct netxen_adapter *adapter)
 {
-	netxen_nic_free_irq(adapter);
-
 	netxen_release_rx_buffers(adapter);
 	netxen_free_hw_resources(adapter);
+	netxen_nic_free_irq(adapter);
 	netxen_free_sw_resources(adapter);
 
 	adapter->is_up = 0;
@@ -957,6 +997,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	rwlock_init(&adapter->adapter_lock);
 	spin_lock_init(&adapter->tx_clean_lock);
+	INIT_LIST_HEAD(&adapter->mac_list);
 
 	err = netxen_setup_pci_map(adapter);
 	if (err)
@@ -979,6 +1020,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
 	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->features |= (NETIF_F_GRO);
 	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
 
 	if (NX_IS_REVISION_P3(revision_id)) {
@@ -1011,7 +1053,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	err = netxen_start_firmware(adapter);
+	err = netxen_start_firmware(adapter, 1);
 	if (err)
 		goto err_out_iounmap;
 
@@ -1024,8 +1066,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	adapter->physical_port = adapter->portnum;
 	if (adapter->fw_major < 4) {
-		i = adapter->pci_read_normalize(adapter,
-				CRB_V2P(adapter->portnum));
+		i = NXRD32(adapter, CRB_V2P(adapter->portnum));
 		if (i != 0x55555555)
 			adapter->physical_port = i;
 	}
@@ -1036,10 +1077,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netdev->irq = adapter->msix_entries[0].vector;
 
-	netxen_napi_add(adapter, netdev);
-
-	err = netxen_receive_peg_ready(adapter);
-	if (err)
+	if (netxen_napi_add(adapter, netdev))
 		goto err_out_disable_msi;
 
 	init_timer(&adapter->watchdog_timer);
@@ -1113,18 +1151,18 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		netxen_nic_detach(adapter);
-
-		if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-			netxen_p3_free_mac_list(adapter);
 	}
 
 	if (adapter->portnum == 0)
 		netxen_free_adapter_offload(adapter);
 
 	netxen_teardown_intr(adapter);
+	netxen_free_sds_rings(&adapter->recv_ctx);
 
 	netxen_cleanup_pci_map(adapter);
 
+	netxen_release_firmware(adapter);
+
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
@@ -1176,7 +1214,7 @@ netxen_nic_resume(struct pci_dev *pdev)
 
 	adapter->curr_window = 255;
 
-	err = netxen_start_firmware(adapter);
+	err = netxen_start_firmware(adapter, 0);
 	if (err) {
 		dev_err(&pdev->dev, "failed to start firmware\n");
 		return err;
@@ -1315,7 +1353,7 @@ static int
 netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct netxen_hardware_context *hw = &adapter->ahw;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
 	unsigned int first_seg_len = skb->len - skb->data_len;
 	struct netxen_cmd_buffer *pbuf;
 	struct netxen_skb_frag *buffrag;
@@ -1326,28 +1364,26 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	u32 producer, consumer;
 	int frag_count, no_of_desc;
-	u32 num_txd = adapter->num_txd;
+	u32 num_txd = tx_ring->num_desc;
 	bool is_tso = false;
 
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
 
-	/* There 4 fragments per descriptor */
+	/* 4 fragments per cmd des */
 	no_of_desc = (frag_count + 3) >> 2;
 
-	producer = adapter->cmd_producer;
+	producer = tx_ring->producer;
 	smp_mb();
-	consumer = adapter->last_cmd_consumer;
-	if ((no_of_desc+2) > find_diff_among(producer, consumer, num_txd)) {
+	consumer = tx_ring->sw_consumer;
+	if ((no_of_desc+2) >= find_diff_among(producer, consumer, num_txd)) {
 		netif_stop_queue(netdev);
 		smp_mb();
 		return NETDEV_TX_BUSY;
 	}
 
-	/* Copy the descriptors into the hardware    */
-	hwdesc = &hw->cmd_desc_head[producer];
+	hwdesc = &tx_ring->desc_head[producer];
 	netxen_clear_cmddesc((u64 *)hwdesc);
-	/* Take skb->data itself */
-	pbuf = &adapter->cmd_buf_arr[producer];
+	pbuf = &tx_ring->cmd_buf_arr[producer];
 
 	is_tso = netxen_tso_check(netdev, hwdesc, skb);
 
@@ -1376,9 +1412,9 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		if ((i & 0x3) == 0) {
 			k = 0;
 			producer = get_next_index(producer, num_txd);
-			hwdesc = &hw->cmd_desc_head[producer];
+			hwdesc = &tx_ring->desc_head[producer];
 			netxen_clear_cmddesc((u64 *)hwdesc);
-			pbuf = &adapter->cmd_buf_arr[producer];
+			pbuf = &tx_ring->cmd_buf_arr[producer];
 			pbuf->skb = NULL;
 		}
 		frag = &skb_shinfo(skb)->frags[i - 1];
@@ -1430,8 +1466,8 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 			more_hdr = 0;
 		}
 		/* copy the MAC/IP/TCP headers to the cmd descriptor list */
-		hwdesc = &hw->cmd_desc_head[producer];
-		pbuf = &adapter->cmd_buf_arr[producer];
+		hwdesc = &tx_ring->desc_head[producer];
+		pbuf = &tx_ring->cmd_buf_arr[producer];
 		pbuf->skb = NULL;
 
 		/* copy the first 64 bytes */
@@ -1440,8 +1476,8 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		producer = get_next_index(producer, num_txd);
 
 		if (more_hdr) {
-			hwdesc = &hw->cmd_desc_head[producer];
-			pbuf = &adapter->cmd_buf_arr[producer];
+			hwdesc = &tx_ring->desc_head[producer];
+			pbuf = &tx_ring->cmd_buf_arr[producer];
 			pbuf->skb = NULL;
 			/* copy the next 64 bytes - should be enough except
 			 * for pathological case
@@ -1454,13 +1490,12 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		}
 	}
 
-	adapter->cmd_producer = producer;
+	tx_ring->producer = producer;
 	adapter->stats.txbytes += skb->len;
 
-	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
+	netxen_nic_update_cmd_producer(adapter, tx_ring, producer);
 
 	adapter->stats.xmitcalled++;
-	netdev->trans_start = jiffies;
 
 	return NETDEV_TX_OK;
 
@@ -1476,7 +1511,7 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 	uint32_t temp, temp_state, temp_val;
 	int rv = 0;
 
-	temp = adapter->pci_read_normalize(adapter, CRB_TEMP_STATE);
+	temp = NXRD32(adapter, CRB_TEMP_STATE);
 
 	temp_state = nx_get_temp_state(temp);
 	temp_val = nx_get_temp_val(temp);
@@ -1510,26 +1545,9 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 	return rv;
 }
 
-static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
+void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup)
 {
 	struct net_device *netdev = adapter->netdev;
-	u32 val, port, linkup;
-
-	port = adapter->physical_port;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3);
-		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
-		linkup = (val == XG_LINK_UP_P3);
-	} else {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-		if (adapter->ahw.port_type == NETXEN_NIC_GBE)
-			linkup = (val >> port) & 1;
-		else {
-			val = (val >> port*8) & 0xff;
-			linkup = (val == XG_LINK_UP);
-		}
-	}
 
 	if (adapter->ahw.linkup && !linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is down\n",
@@ -1540,7 +1558,9 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 			netif_stop_queue(netdev);
 		}
 
-		netxen_nic_set_link_parameters(adapter);
+		if (!adapter->has_link_events)
+			netxen_nic_set_link_parameters(adapter);
+
 	} else if (!adapter->ahw.linkup && linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is up\n",
 		       netxen_nic_driver_name, netdev->name);
@@ -1550,8 +1570,32 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 			netif_wake_queue(netdev);
 		}
 
-		netxen_nic_set_link_parameters(adapter);
+		if (!adapter->has_link_events)
+			netxen_nic_set_link_parameters(adapter);
+	}
+}
+
+static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
+{
+	u32 val, port, linkup;
+
+	port = adapter->physical_port;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		val = NXRD32(adapter, CRB_XG_STATE_P3);
+		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+		linkup = (val == XG_LINK_UP_P3);
+	} else {
+		val = NXRD32(adapter, CRB_XG_STATE);
+		if (adapter->ahw.port_type == NETXEN_NIC_GBE)
+			linkup = (val >> port) & 1;
+		else {
+			val = (val >> port*8) & 0xff;
+			linkup = (val == XG_LINK_UP);
+		}
 	}
+
+	netxen_advert_link_change(adapter, linkup);
 }
 
 static void netxen_watchdog(unsigned long v)
@@ -1569,7 +1613,8 @@ void netxen_watchdog_task(struct work_struct *work)
 	if ((adapter->portnum  == 0) && netxen_nic_check_temp(adapter))
 		return;
 
-	netxen_nic_handle_phy_intr(adapter);
+	if (!adapter->has_link_events)
+		netxen_nic_handle_phy_intr(adapter);
 
 	if (netif_running(adapter->netdev))
 		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
@@ -1598,10 +1643,6 @@ static void netxen_tx_timeout_task(struct work_struct *work)
 	netif_wake_queue(adapter->netdev);
 }
 
-/*
- * netxen_nic_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- */
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
@@ -1609,22 +1650,11 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 
 	memset(stats, 0, sizeof(*stats));
 
-	/* total packets received   */
 	stats->rx_packets = adapter->stats.no_rcv;
-	/* total packets transmitted    */
-	stats->tx_packets = adapter->stats.xmitedframes +
-		adapter->stats.xmitfinished;
-	/* total bytes received     */
+	stats->tx_packets = adapter->stats.xmitfinished;
 	stats->rx_bytes = adapter->stats.rxbytes;
-	/* total bytes transmitted  */
 	stats->tx_bytes = adapter->stats.txbytes;
-	/* bad packets received     */
-	stats->rx_errors = adapter->stats.rcvdbadskb;
-	/* packet transmit problems */
-	stats->tx_errors = adapter->stats.nocmddescriptor;
-	/* no space in linux buffers    */
 	stats->rx_dropped = adapter->stats.rxdropped;
-	/* no space available in linux  */
 	stats->tx_dropped = adapter->stats.txdropped;
 
 	return stats;
@@ -1651,15 +1681,14 @@ static irqreturn_t netxen_intr(int irq, void *data)
 	} else {
 		unsigned long our_int = 0;
 
-		our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+		our_int = NXRD32(adapter, CRB_INT_VECTOR);
 
 		/* not our interrupt */
 		if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
 			return IRQ_NONE;
 
 		/* claim interrupt */
-		adapter->pci_write_normalize(adapter,
-				CRB_INT_VECTOR, (our_int & 0xffffffff));
+		NXWR32(adapter, CRB_INT_VECTOR, (our_int & 0xffffffff));
 	}
 
 	/* clear interrupt */
@@ -1685,7 +1714,7 @@ static irqreturn_t netxen_msi_intr(int irq, void *data)
 
 	/* clear interrupt */
 	adapter->pci_write_immediate(adapter,
-			msi_tgt_status[adapter->ahw.pci_func], 0xffffffff);
+			adapter->msi_tgt_status, 0xffffffff);
 
 	napi_schedule(&sds_ring->napi);
 	return IRQ_HANDLED;
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index d85203203d4..5941c79be72 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -43,8 +43,7 @@ static int phy_lock(struct netxen_adapter *adapter)
 	int done = 0, timeout = 0;
 
 	while (!done) {
-		done = netxen_nic_reg_read(adapter,
-				NETXEN_PCIE_REG(PCIE_SEM3_LOCK));
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM3_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= phy_lock_timeout) {
@@ -59,8 +58,7 @@ static int phy_lock(struct netxen_adapter *adapter)
 		}
 	}
 
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_PHY_LOCK_ID, PHY_LOCK_DRIVER);
+	NXWR32(adapter, NETXEN_PHY_LOCK_ID, PHY_LOCK_DRIVER);
 	return 0;
 }
 
@@ -105,9 +103,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	 * so it cannot be in reset
 	 */
 
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
-				  &mac_cfg0, 4))
-		return -EIO;
+	mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
 	if (netxen_gb_get_soft_reset(mac_cfg0)) {
 		__u32 temp;
 		temp = 0;
@@ -115,9 +111,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 		netxen_gb_rx_reset_pb(temp);
 		netxen_gb_tx_reset_mac(temp);
 		netxen_gb_rx_reset_mac(temp);
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &temp, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
 			return -EIO;
 		restore = 1;
 	}
@@ -125,43 +119,32 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	address = 0;
 	netxen_gb_mii_mgmt_reg_addr(address, reg);
 	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
-				   &address, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
 		return -EIO;
 	command = 0;		/* turn off any prior activity */
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
-				   &command, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
 		return -EIO;
 	/* send read command */
 	netxen_gb_mii_mgmt_set_read_cycle(command);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
-				   &command, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
 		return -EIO;
 
 	status = 0;
 	do {
-		if (adapter->hw_read_wx(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
-					  &status, 4))
-			return -EIO;
+		status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
 		timeout++;
 	} while ((netxen_get_gb_mii_mgmt_busy(status)
 		  || netxen_get_gb_mii_mgmt_notvalid(status))
 		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
 
 	if (timeout < NETXEN_NIU_PHY_WAITMAX) {
-		if (adapter->hw_read_wx(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_STATUS(0),
-					  readval, 4))
-			return -EIO;
+		*readval = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_STATUS(0));
 		result = 0;
 	} else
 		result = -1;
 
 	if (restore)
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &mac_cfg0, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
 			return -EIO;
 	phy_unlock(adapter);
 	return result;
@@ -197,9 +180,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 	 * cannot be in reset
 	 */
 
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
-				  &mac_cfg0, 4))
-		return -EIO;
+	mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
 	if (netxen_gb_get_soft_reset(mac_cfg0)) {
 		__u32 temp;
 		temp = 0;
@@ -208,35 +189,27 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 		netxen_gb_tx_reset_mac(temp);
 		netxen_gb_rx_reset_mac(temp);
 
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &temp, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
 			return -EIO;
 		restore = 1;
 	}
 
 	command = 0;		/* turn off any prior activity */
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
-				   &command, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
 		return -EIO;
 
 	address = 0;
 	netxen_gb_mii_mgmt_reg_addr(address, reg);
 	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
-				   &address, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
 		return -EIO;
 
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0),
-				   &val, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), val))
 		return -EIO;
 
 	status = 0;
 	do {
-		if (adapter->hw_read_wx(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
-					  &status, 4))
-			return -EIO;
+		status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
 		timeout++;
 	} while ((netxen_get_gb_mii_mgmt_busy(status))
 		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
@@ -248,9 +221,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 
 	/* restore the state of port 0 MAC in case we tampered with it */
 	if (restore)
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &mac_cfg0, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
 			return -EIO;
 
 	return result;
@@ -258,7 +229,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 
 int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x3f);
+	NXWR32(adapter, NETXEN_NIU_INT_MASK, 0x3f);
 	return 0;
 }
 
@@ -281,7 +252,7 @@ int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter)
 
 int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x7f);
+	NXWR32(adapter, NETXEN_NIU_INT_MASK, 0x7f);
 	return 0;
 }
 
@@ -315,36 +286,27 @@ static int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter)
 static void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter,
 					int port, long enable)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x80000000);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x0000f0025);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port),
-				    0xf1ff);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_MII_MODE + (port << 3), 1);
-	netxen_crb_writelit_adapter(adapter,
-				    (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
+	NXWR32(adapter, NETXEN_NIU_MODE, 0x2);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x80000000);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x0000f0025);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), 0xf1ff);
+	NXWR32(adapter, NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0);
+	NXWR32(adapter, NETXEN_NIU_GB0_MII_MODE + (port << 3), 1);
+	NXWR32(adapter, (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
+	NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
 
 	if (enable) {
 		/*
 		 * Do NOT enable flow control until a suitable solution for
 		 *  shutting down pause frames is found.
 		 */
-		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_NIU_GB_MAC_CONFIG_0(port),
-					    0x5);
+		NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x5);
 	}
 
 	if (netxen_niu_gbe_enable_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n");
+		printk(KERN_ERR "ERROR enabling PHY interrupts\n");
 	if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
+		printk(KERN_ERR "ERROR clearing PHY interrupts\n");
 }
 
 /*
@@ -353,36 +315,27 @@ static void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter,
 static void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter,
 					 int port, long enable)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x80000000);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x0000f0025);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port),
-				    0xf2ff);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_MII_MODE + (port << 3), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1);
-	netxen_crb_writelit_adapter(adapter,
-				    (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
+	NXWR32(adapter, NETXEN_NIU_MODE, 0x2);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x80000000);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x0000f0025);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), 0xf2ff);
+	NXWR32(adapter, NETXEN_NIU_GB0_MII_MODE + (port << 3), 0);
+	NXWR32(adapter, NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1);
+	NXWR32(adapter, (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
+	NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
 
 	if (enable) {
 		/*
 		 * Do NOT enable flow control until a suitable solution for
 		 *  shutting down pause frames is found.
 		 */
-		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_NIU_GB_MAC_CONFIG_0(port),
-					    0x5);
+		NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x5);
 	}
 
 	if (netxen_niu_gbe_enable_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n");
+		printk(KERN_ERR "ERROR enabling PHY interrupts\n");
 	if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
+		printk(KERN_ERR "ERROR clearing PHY interrupts\n");
 }
 
 int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
@@ -416,25 +369,20 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 			 * plugged in.
 			 */
 
-			netxen_crb_writelit_adapter(adapter,
-						    NETXEN_NIU_GB_MAC_CONFIG_0
-						    (port),
+			NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 						    NETXEN_GB_MAC_SOFT_RESET);
-			netxen_crb_writelit_adapter(adapter,
-						    NETXEN_NIU_GB_MAC_CONFIG_0
-						    (port),
-						    NETXEN_GB_MAC_RESET_PROT_BLK
-						    | NETXEN_GB_MAC_ENABLE_TX_RX
-						    |
-						    NETXEN_GB_MAC_PAUSED_FRMS);
+			NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+					    NETXEN_GB_MAC_RESET_PROT_BLK |
+					    NETXEN_GB_MAC_ENABLE_TX_RX |
+					    NETXEN_GB_MAC_PAUSED_FRMS);
 			if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-				printk(KERN_ERR PFX
+				printk(KERN_ERR
 				       "ERROR clearing PHY interrupts\n");
 			if (netxen_niu_gbe_enable_phy_interrupts(adapter))
-				printk(KERN_ERR PFX
+				printk(KERN_ERR
 				       "ERROR enabling PHY interrupts\n");
 			if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-				printk(KERN_ERR PFX
+				printk(KERN_ERR
 				       "ERROR clearing PHY interrupts\n");
 			result = -1;
 		}
@@ -447,88 +395,10 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
 {
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		netxen_crb_writelit_adapter(adapter,
-			NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
-		netxen_crb_writelit_adapter(adapter,
-			NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
-	}
-
-	return 0;
-}
-
-/*
- * Return the current station MAC address.
- * Note that the passed-in value must already be in network byte order.
- */
-static int netxen_niu_macaddr_get(struct netxen_adapter *adapter,
-				  netxen_ethernet_macaddr_t * addr)
-{
-	u32 stationhigh;
-	u32 stationlow;
-	int phy = adapter->physical_port;
-	u8 val[8];
-
-	if (addr == NULL)
-		return -EINVAL;
-	if ((phy < 0) || (phy > 3))
-		return -EINVAL;
-
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy),
-				  &stationhigh, 4))
-		return -EIO;
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy),
-				  &stationlow, 4))
-		return -EIO;
-	((__le32 *)val)[1] = cpu_to_le32(stationhigh);
-	((__le32 *)val)[0] = cpu_to_le32(stationlow);
-
-	memcpy(addr, val + 2, 6);
-
-	return 0;
-}
-
-/*
- * Set the station MAC address.
- * Note that the passed-in value must already be in network byte order.
- */
-int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
-			   netxen_ethernet_macaddr_t addr)
-{
-	u8 temp[4];
-	u32 val;
-	int phy = adapter->physical_port;
-	unsigned char mac_addr[6];
-	int i;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		return 0;
-
-	for (i = 0; i < 10; i++) {
-		temp[0] = temp[1] = 0;
-		memcpy(temp + 2, addr, 2);
-		val = le32_to_cpu(*(__le32 *)temp);
-		if (adapter->hw_write_wx(adapter,
-				NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4))
-			return -EIO;
-
-		memcpy(temp, ((u8 *) addr) + 2, sizeof(__le32));
-		val = le32_to_cpu(*(__le32 *)temp);
-		if (adapter->hw_write_wx(adapter,
-				NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
-			return -2;
-
-		netxen_niu_macaddr_get(adapter,
-				       (netxen_ethernet_macaddr_t *) mac_addr);
-		if (memcmp(mac_addr, addr, 6) == 0)
-			break;
+		NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
+		NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
 	}
 
-	if (i == 10) {
-		printk(KERN_ERR "%s: cannot set Mac addr for %s\n",
-		       netxen_nic_driver_name, adapter->netdev->name);
-		printk(KERN_ERR "MAC address set: %pM.\n", addr);
-		printk(KERN_ERR "MAC address get: %pM.\n", mac_addr);
-	}
 	return 0;
 }
 
@@ -545,8 +415,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 		return -EINVAL;
 	mac_cfg0 = 0;
 	netxen_gb_soft_reset(mac_cfg0);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				   &mac_cfg0, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), mac_cfg0))
 		return -EIO;
 	return 0;
 }
@@ -564,8 +433,8 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 		return -EINVAL;
 
 	mac_cfg = 0;
-	if (adapter->hw_write_wx(adapter,
-		NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), &mac_cfg, 4))
+	if (NXWR32(adapter,
+			NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg))
 		return -EIO;
 	return 0;
 }
@@ -581,9 +450,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 		return -EINVAL;
 
 	/* save previous contents */
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
-				  &reg, 4))
-		return -EIO;
+	reg = NXRD32(adapter, NETXEN_NIU_GB_DROP_WRONGADDR);
 	if (mode == NETXEN_NIU_PROMISC_MODE) {
 		switch (port) {
 		case 0:
@@ -619,67 +486,11 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 			return -EIO;
 		}
 	}
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
-				   &reg, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, reg))
 		return -EIO;
 	return 0;
 }
 
-/*
- * Set the MAC address for an XG port
- * Note that the passed-in value must already be in network byte order.
- */
-int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
-			      netxen_ethernet_macaddr_t addr)
-{
-	int phy = adapter->physical_port;
-	u8 temp[4];
-	u32 val;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		return 0;
-
-	if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS))
-		return -EIO;
-
-	temp[0] = temp[1] = 0;
-	switch (phy) {
-	case 0:
-	    memcpy(temp + 2, addr, 2);
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
-				&val, 4))
-		return -EIO;
-
-	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
-				&val, 4))
-		return -EIO;
-	    break;
-
-	case 1:
-	    memcpy(temp + 2, addr, 2);
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_1,
-				&val, 4))
-		return -EIO;
-
-	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_HI,
-				&val, 4))
-		return -EIO;
-	    break;
-
-	default:
-	    printk(KERN_ERR "Unknown port %d\n", phy);
-	    break;
-	}
-
-	return 0;
-}
-
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 		u32 mode)
 {
@@ -689,9 +500,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
-	if (adapter->hw_read_wx(adapter,
-		NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), &reg, 4))
-			return -EIO;
+	reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
 	if (mode == NETXEN_NIU_PROMISC_MODE)
 		reg = (reg | 0x2000UL);
 	else
@@ -702,8 +511,40 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	else
 		reg = (reg & ~0x1000UL);
 
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+
+	return 0;
+}
+
+int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
+{
+	u32 mac_hi, mac_lo;
+	u32 reg_hi, reg_lo;
+
+	u8 phy = adapter->physical_port;
+	u8 phy_count = (adapter->ahw.port_type == NETXEN_NIC_XGBE) ?
+		NETXEN_NIU_MAX_XG_PORTS : NETXEN_NIU_MAX_GBE_PORTS;
+
+	if (phy >= phy_count)
+		return -EINVAL;
+
+	mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24);
+	mac_hi = addr[2] | ((u32)addr[3] << 8) |
+		((u32)addr[4] << 16) | ((u32)addr[5] << 24);
+
+	if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
+		reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy);
+		reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy);
+	} else {
+		reg_lo = NETXEN_NIU_GB_STATION_ADDR_1(phy);
+		reg_hi = NETXEN_NIU_GB_STATION_ADDR_0(phy);
+	}
+
+	/* write twice to flush */
+	if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
+		return -EIO;
+	if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
+		return -EIO;
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 50183335e43..b73a62ca74f 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -36,23 +36,25 @@
  */
 #define NIC_CRB_BASE               NETXEN_CAM_RAM(0x200)
 #define NETXEN_NIC_REG(X)             (NIC_CRB_BASE+(X))
+#define NIC_CRB_BASE_2             NETXEN_CAM_RAM(0x700)
+#define NETXEN_NIC_REG_2(X)         (NIC_CRB_BASE_2+(X))
 
 #define CRB_PHAN_CNTRL_LO_OFFSET    NETXEN_NIC_REG(0x00)
 #define CRB_PHAN_CNTRL_HI_OFFSET    NETXEN_NIC_REG(0x04)
 #define CRB_CMD_PRODUCER_OFFSET     NETXEN_NIC_REG(0x08)
 #define CRB_CMD_CONSUMER_OFFSET     NETXEN_NIC_REG(0x0c)
-#define CRB_PAUSE_ADDR_LO           NETXEN_NIC_REG(0x10)	/* C0 EPG BUG  */
+#define CRB_PAUSE_ADDR_LO           NETXEN_NIC_REG(0x10)
 #define CRB_PAUSE_ADDR_HI           NETXEN_NIC_REG(0x14)
 #define NX_CDRP_CRB_OFFSET          NETXEN_NIC_REG(0x18)
 #define NX_ARG1_CRB_OFFSET          NETXEN_NIC_REG(0x1c)
 #define NX_ARG2_CRB_OFFSET          NETXEN_NIC_REG(0x20)
 #define NX_ARG3_CRB_OFFSET          NETXEN_NIC_REG(0x24)
 #define NX_SIGN_CRB_OFFSET          NETXEN_NIC_REG(0x28)
-#define CRB_CMD_INTR_LOOP           NETXEN_NIC_REG(0x20)	/* 4 regs for perf */
+#define CRB_CMD_INTR_LOOP           NETXEN_NIC_REG(0x20)
 #define CRB_CMD_DMA_LOOP            NETXEN_NIC_REG(0x24)
 #define CRB_RCV_INTR_LOOP           NETXEN_NIC_REG(0x28)
 #define CRB_RCV_DMA_LOOP            NETXEN_NIC_REG(0x2c)
-#define CRB_ENABLE_TX_INTR          NETXEN_NIC_REG(0x30)	/* phantom init status */
+#define CRB_ENABLE_TX_INTR          NETXEN_NIC_REG(0x30)
 #define CRB_MMAP_ADDR_3             NETXEN_NIC_REG(0x34)
 #define CRB_CMDPEG_CMDRING          NETXEN_NIC_REG(0x38)
 #define CRB_HOST_DUMMY_BUF_ADDR_HI  NETXEN_NIC_REG(0x3c)
@@ -65,7 +67,7 @@
 #define CRB_MMAP_SIZE_1             NETXEN_NIC_REG(0x58)
 #define CRB_MMAP_SIZE_2             NETXEN_NIC_REG(0x5c)
 #define CRB_MMAP_SIZE_3             NETXEN_NIC_REG(0x60)
-#define CRB_GLOBAL_INT_COAL         NETXEN_NIC_REG(0x64)	/* interrupt coalescing */
+#define CRB_GLOBAL_INT_COAL         NETXEN_NIC_REG(0x64)
 #define CRB_INT_COAL_MODE           NETXEN_NIC_REG(0x68)
 #define CRB_MAX_RCV_BUFS            NETXEN_NIC_REG(0x6c)
 #define CRB_TX_INT_THRESHOLD        NETXEN_NIC_REG(0x70)
@@ -83,13 +85,13 @@
 #define CRB_AGENT_TX_TYPE           NETXEN_NIC_REG(0xa0)
 #define CRB_AGENT_TX_ADDR           NETXEN_NIC_REG(0xa4)
 #define CRB_AGENT_TX_MSS            NETXEN_NIC_REG(0xa8)
-#define CRB_TX_STATE                NETXEN_NIC_REG(0xac)	/* Debug -performance */
+#define CRB_TX_STATE                NETXEN_NIC_REG(0xac)
 #define CRB_TX_COUNT                NETXEN_NIC_REG(0xb0)
 #define CRB_RX_STATE                NETXEN_NIC_REG(0xb4)
 #define CRB_RX_PERF_DEBUG_1         NETXEN_NIC_REG(0xb8)
-#define CRB_RX_LRO_CONTROL          NETXEN_NIC_REG(0xbc)	/* LRO On/OFF */
+#define CRB_RX_LRO_CONTROL          NETXEN_NIC_REG(0xbc)
 #define CRB_RX_LRO_START_NUM        NETXEN_NIC_REG(0xc0)
-#define CRB_MPORT_MODE              NETXEN_NIC_REG(0xc4)	/* Multiport Mode */
+#define CRB_MPORT_MODE              NETXEN_NIC_REG(0xc4)
 #define CRB_CMD_RING_SIZE           NETXEN_NIC_REG(0xc8)
 #define CRB_DMA_SHIFT               NETXEN_NIC_REG(0xcc)
 #define CRB_INT_VECTOR              NETXEN_NIC_REG(0xd4)
@@ -109,8 +111,6 @@
 #define CRB_CMD_CONSUMER_OFFSET_1   NETXEN_NIC_REG(0x1b0)
 #define CRB_CMD_PRODUCER_OFFSET_2   NETXEN_NIC_REG(0x1b8)
 #define CRB_CMD_CONSUMER_OFFSET_2   NETXEN_NIC_REG(0x1bc)
-
-// 1c0 to 1cc used for signature reg
 #define CRB_CMD_PRODUCER_OFFSET_3   NETXEN_NIC_REG(0x1d0)
 #define CRB_CMD_CONSUMER_OFFSET_3   NETXEN_NIC_REG(0x1d4)
 #define CRB_TEMP_STATE              NETXEN_NIC_REG(0x1b4)
@@ -120,13 +120,13 @@
 #define CRB_V2P_2		    NETXEN_NIC_REG(0x298)
 #define CRB_V2P_3		    NETXEN_NIC_REG(0x29c)
 #define CRB_V2P(port)		    (CRB_V2P_0+((port)*4))
-#define CRB_DRIVER_VERSION	    NETXEN_NIC_REG(0x2a0)
-/* sw int status/mask registers */
+#define CRB_DRIVER_VERSION	   NETXEN_NIC_REG(0x2a0)
 #define CRB_SW_INT_MASK_0	   NETXEN_NIC_REG(0x1d8)
 #define CRB_SW_INT_MASK_1	   NETXEN_NIC_REG(0x1e0)
 #define CRB_SW_INT_MASK_2	   NETXEN_NIC_REG(0x1e4)
 #define CRB_SW_INT_MASK_3	   NETXEN_NIC_REG(0x1e8)
 
+#define CRB_FW_CAPABILITIES_1      NETXEN_CAM_RAM(0x128)
 #define CRB_MAC_BLOCK_START        NETXEN_CAM_RAM(0x1c0)
 
 /*
@@ -136,7 +136,7 @@
 #define CRB_NIC_CAPABILITIES_HOST	NETXEN_NIC_REG(0x1a8)
 #define CRB_NIC_CAPABILITIES_FW	  	NETXEN_NIC_REG(0x1dc)
 #define CRB_NIC_MSI_MODE_HOST		NETXEN_NIC_REG(0x270)
-#define CRB_NIC_MSI_MODE_FW	  		NETXEN_NIC_REG(0x274)
+#define CRB_NIC_MSI_MODE_FW	  	NETXEN_NIC_REG(0x274)
 
 #define INTR_SCHEME_PERPORT	      	0x1
 #define MSI_MODE_MULTIFUNC	      	0x1
@@ -162,7 +162,8 @@
 
 struct netxen_recv_crb {
 	u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
-	u32 crb_sts_consumer;
+	u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
+	u32 sw_int_mask[NUM_STS_DESC_RINGS];
 };
 
 /*
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 6474f02bf78..1f10ed603e2 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -1165,7 +1165,7 @@ static int ni65_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 	if (test_and_set_bit(0, (void*)&p->lock)) {
 		printk(KERN_ERR "%s: Queue was locked.\n", dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	{
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 2b1745328cf..fa61a12c5e1 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -22,6 +22,7 @@
 #include <linux/log2.h>
 #include <linux/jiffies.h>
 #include <linux/crc32.h>
+#include <linux/list.h>
 
 #include <linux/io.h>
 
@@ -1317,7 +1318,7 @@ static int bcm8704_reset(struct niu *np)
 
 	err = mdio_read(np, np->phy_addr,
 			BCM8704_PHYXS_DEV_ADDR, MII_BMCR);
-	if (err < 0)
+	if (err < 0 || err == 0xffff)
 		return err;
 	err |= BMCR_RESET;
 	err = mdio_write(np, np->phy_addr, BCM8704_PHYXS_DEV_ADDR,
@@ -2042,7 +2043,7 @@ static int link_status_10g_bcm8706(struct niu *np, int *link_up_p)
 
 	err = mdio_read(np, np->phy_addr, BCM8704_PMA_PMD_DEV_ADDR,
 			BCM8704_PMD_RCV_SIGDET);
-	if (err < 0)
+	if (err < 0 || err == 0xffff)
 		goto out;
 	if (!(err & PMD_RCV_SIGDET_GLOBAL)) {
 		err = 0;
@@ -2083,8 +2084,6 @@ static int link_status_10g_bcm8706(struct niu *np, int *link_up_p)
 
 out:
 	*link_up_p = link_up;
-	if (np->flags & NIU_FLAGS_HOTPLUG_PHY)
-		err = 0;
 	return err;
 }
 
@@ -2220,10 +2219,17 @@ static int link_status_10g_hotplug(struct niu *np, int *link_up_p)
 		if (phy_present != phy_present_prev) {
 			/* state change */
 			if (phy_present) {
+				/* A NEM was just plugged in */
 				np->flags |= NIU_FLAGS_HOTPLUG_PHY_PRESENT;
 				if (np->phy_ops->xcvr_init)
 					err = np->phy_ops->xcvr_init(np);
 				if (err) {
+					err = mdio_read(np, np->phy_addr,
+						BCM8704_PHYXS_DEV_ADDR, MII_BMCR);
+					if (err == 0xffff) {
+						/* No mdio, back-to-back XAUI */
+						goto out;
+					}
 					/* debounce */
 					np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
 				}
@@ -2234,13 +2240,21 @@ static int link_status_10g_hotplug(struct niu *np, int *link_up_p)
 					np->dev->name);
 			}
 		}
-		if (np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT)
+out:
+		if (np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT) {
 			err = link_status_10g_bcm8706(np, link_up_p);
+			if (err == 0xffff) {
+				/* No mdio, back-to-back XAUI: it is C10NEM */
+				*link_up_p = 1;
+				np->link_config.active_speed = SPEED_10000;
+				np->link_config.active_duplex = DUPLEX_FULL;
+			}
+		}
 	}
 
 	spin_unlock_irqrestore(&np->lock, flags);
 
-	return err;
+	return 0;
 }
 
 static int niu_link_status(struct niu *np, int *link_up_p)
@@ -2312,6 +2326,12 @@ static const struct niu_phy_ops phy_ops_10g_fiber_hotplug = {
 	.link_status		= link_status_10g_hotplug,
 };
 
+static const struct niu_phy_ops phy_ops_niu_10g_hotplug = {
+	.serdes_init		= serdes_init_niu_10g_fiber,
+	.xcvr_init		= xcvr_init_10g_bcm8706,
+	.link_status		= link_status_10g_hotplug,
+};
+
 static const struct niu_phy_ops phy_ops_10g_copper = {
 	.serdes_init		= serdes_init_10g,
 	.link_status		= link_status_10g, /* XXX */
@@ -2358,6 +2378,11 @@ static const struct niu_phy_template phy_template_10g_fiber_hotplug = {
 	.phy_addr_base	= 8,
 };
 
+static const struct niu_phy_template phy_template_niu_10g_hotplug = {
+	.ops		= &phy_ops_niu_10g_hotplug,
+	.phy_addr_base	= 8,
+};
+
 static const struct niu_phy_template phy_template_10g_copper = {
 	.ops		= &phy_ops_10g_copper,
 	.phy_addr_base	= 10,
@@ -2542,8 +2567,16 @@ static int niu_determine_phy_disposition(struct niu *np)
 		case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
 			/* 10G Fiber */
 		default:
-			tp = &phy_template_niu_10g_fiber;
-			phy_addr_off += np->port;
+			if (np->flags & NIU_FLAGS_HOTPLUG_PHY) {
+				tp = &phy_template_niu_10g_hotplug;
+				if (np->port == 0)
+					phy_addr_off = 8;
+				if (np->port == 1)
+					phy_addr_off = 12;
+			} else {
+				tp = &phy_template_niu_10g_fiber;
+				phy_addr_off += np->port;
+			}
 			break;
 		}
 	} else {
@@ -2630,11 +2663,11 @@ static int niu_init_link(struct niu *np)
 		msleep(200);
 	}
 	err = niu_serdes_init(np);
-	if (err)
+	if (err && !(np->flags & NIU_FLAGS_HOTPLUG_PHY))
 		return err;
 	msleep(200);
 	err = niu_xcvr_init(np);
-	if (!err)
+	if (!err || (np->flags & NIU_FLAGS_HOTPLUG_PHY))
 		niu_link_status(np, &ignore);
 	return 0;
 }
@@ -6330,6 +6363,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	struct niu *np = netdev_priv(dev);
 	int i, alt_cnt, err;
 	struct dev_addr_list *addr;
+	struct netdev_hw_addr *ha;
 	unsigned long flags;
 	u16 hash[16] = { 0, };
 
@@ -6351,9 +6385,8 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if (alt_cnt) {
 		int index = 0;
 
-		for (addr = dev->uc_list; addr; addr = addr->next) {
-			err = niu_set_alt_mac(np, index,
-					      addr->da_addr);
+		list_for_each_entry(ha, &dev->uc_list, list) {
+			err = niu_set_alt_mac(np, index, ha->addr);
 			if (err)
 				printk(KERN_WARNING PFX "%s: Error %d "
 				       "adding alt mac %d\n",
@@ -6745,8 +6778,6 @@ static int niu_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			netif_tx_wake_queue(txq);
 	}
 
-	dev->trans_start = jiffies;
-
 out:
 	return NETDEV_TX_OK;
 
@@ -9346,6 +9377,11 @@ static int __devinit niu_get_of_props(struct niu *np)
 	if (model)
 		strcpy(np->vpd.model, model);
 
+	if (of_find_property(dp, "hot-swappable-phy", &prop_len)) {
+		np->flags |= (NIU_FLAGS_10G | NIU_FLAGS_FIBER |
+			NIU_FLAGS_HOTPLUG_PHY);
+	}
+
 	return 0;
 #else
 	return -EINVAL;
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 8754e44cada..3bd0b5933d5 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3242,8 +3242,8 @@ struct niu {
 	struct niu_parent		*parent;
 
 	u32				flags;
-#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removebale PHY detected*/
-#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removebale PHY */
+#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removeable PHY detected*/
+#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removeable PHY */
 #define NIU_FLAGS_VPD_VALID		0x00800000 /* VPD has valid version */
 #define NIU_FLAGS_MSIX			0x00400000 /* MSI-X in use */
 #define NIU_FLAGS_MCAST			0x00200000 /* multicast filter enabled */
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index d531614a90b..1576ac07216 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1097,7 +1097,7 @@ again:
 	if (unlikely(dev->CFG_cache & CFG_LNKSTS)) {
 		netif_stop_queue(ndev);
 		if (unlikely(dev->CFG_cache & CFG_LNKSTS))
-			return 1;
+			return NETDEV_TX_BUSY;
 		netif_start_queue(ndev);
 	}
 
@@ -1115,7 +1115,7 @@ again:
 			netif_start_queue(ndev);
 			goto again;
 		}
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (free_idx == dev->tx_intr_idx) {
@@ -1204,9 +1204,7 @@ again:
 	if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev))
 		netif_start_queue(ndev);
 
-	/* set the transmit start time to catch transmit timeouts */
-	ndev->trans_start = jiffies;
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void ns83820_update_stats(struct ns83820 *dev)
@@ -1626,7 +1624,7 @@ static void ns83820_tx_watch(unsigned long data)
 		);
 #endif
 
-	if (time_after(jiffies, ndev->trans_start + 1*HZ) &&
+	if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) &&
 	    dev->tx_done_idx != dev->tx_free_idx) {
 		printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n",
 			ndev->name,
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 5eeb5a87b73..c254a7f5b9f 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -24,6 +24,7 @@
 #include <linux/dmaengine.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
+#include <linux/of_mdio.h>
 #include <linux/etherdevice.h>
 #include <asm/dma-mapping.h>
 #include <linux/in.h>
@@ -1086,34 +1087,17 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 	struct pasemi_mac *mac = netdev_priv(dev);
 	struct device_node *dn, *phy_dn;
 	struct phy_device *phydev;
-	unsigned int phy_id;
-	const phandle *ph;
-	const unsigned int *prop;
-	struct resource r;
-	int ret;
 
 	dn = pci_device_to_OF_node(mac->pdev);
-	ph = of_get_property(dn, "phy-handle", NULL);
-	if (!ph)
-		return -ENODEV;
-	phy_dn = of_find_node_by_phandle(*ph);
-
-	prop = of_get_property(phy_dn, "reg", NULL);
-	ret = of_address_to_resource(phy_dn->parent, 0, &r);
-	if (ret)
-		goto err;
-
-	phy_id = *prop;
-	snprintf(mac->phy_id, sizeof(mac->phy_id), "%x:%02x",
-		 (int)r.start, phy_id);
-
+	phy_dn = of_parse_phandle(dn, "phy-handle", 0);
 	of_node_put(phy_dn);
 
 	mac->link = 0;
 	mac->speed = 0;
 	mac->duplex = -1;
 
-	phydev = phy_connect(dev, mac->phy_id, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII);
+	phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0,
+				PHY_INTERFACE_MODE_SGMII);
 
 	if (IS_ERR(phydev)) {
 		printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
@@ -1123,10 +1107,6 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 	mac->phydev = phydev;
 
 	return 0;
-
-err:
-	of_node_put(phy_dn);
-	return -ENODEV;
 }
 
 
@@ -1735,12 +1715,25 @@ out:
 	return ret;
 }
 
+static const struct net_device_ops pasemi_netdev_ops = {
+	.ndo_open		= pasemi_mac_open,
+	.ndo_stop		= pasemi_mac_close,
+	.ndo_start_xmit		= pasemi_mac_start_tx,
+	.ndo_set_multicast_list	= pasemi_mac_set_rx_mode,
+	.ndo_set_mac_address	= pasemi_mac_set_mac_addr,
+	.ndo_change_mtu		= pasemi_mac_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= pasemi_mac_netpoll,
+#endif
+};
+
 static int __devinit
 pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *dev;
 	struct pasemi_mac *mac;
-	int err;
+	int err, ret;
 
 	err = pci_enable_device(pdev);
 	if (err)
@@ -1798,12 +1791,13 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	memcpy(dev->dev_addr, mac->mac_addr, sizeof(mac->mac_addr));
 
-	mac->dma_if = mac_to_intf(mac);
-	if (mac->dma_if < 0) {
+	ret = mac_to_intf(mac);
+	if (ret < 0) {
 		dev_err(&mac->pdev->dev, "Can't map DMA interface\n");
 		err = -ENODEV;
 		goto out;
 	}
+	mac->dma_if = ret;
 
 	switch (pdev->device) {
 	case 0xa005:
@@ -1817,19 +1811,11 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out;
 	}
 
-	dev->open = pasemi_mac_open;
-	dev->stop = pasemi_mac_close;
-	dev->hard_start_xmit = pasemi_mac_start_tx;
-	dev->set_multicast_list = pasemi_mac_set_rx_mode;
-	dev->set_mac_address = pasemi_mac_set_mac_addr;
+	dev->netdev_ops = &pasemi_netdev_ops;
 	dev->mtu = PE_DEF_MTU;
 	/* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
 	mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = pasemi_mac_netpoll;
-#endif
 
-	dev->change_mtu = pasemi_mac_change_mtu;
 	dev->ethtool_ops = &pasemi_mac_ethtool_ops;
 
 	if (err)
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 1a115ec60b5..e2f4efa8ad4 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -100,7 +100,6 @@ struct pasemi_mac {
 	int	duplex;
 
 	unsigned int	msg_enable;
-	char	phy_id[BUS_ID_SIZE];
 };
 
 /* Software status descriptor (ring_info) */
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index c95fd72c3bb..8c1f6988f39 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -728,6 +728,17 @@ err_out:
 	return rc;
 }
 
+static const struct net_device_ops netdrv_netdev_ops = {
+	.ndo_open		= netdrv_open,
+	.ndo_stop		= netdrv_close,
+	.ndo_start_xmit		= netdrv_start_xmit,
+	.ndo_set_multicast_list	= netdrv_set_rx_mode,
+	.ndo_do_ioctl		= netdrv_ioctl,
+	.ndo_tx_timeout		= netdrv_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
 
 static int __devinit netdrv_init_one (struct pci_dev *pdev,
 				       const struct pci_device_id *ent)
@@ -769,13 +780,7 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
 		((u16 *) (dev->dev_addr))[i] =
 		    le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
 
-	/* The Rtl8139-specific entries in the device structure. */
-	dev->open = netdrv_open;
-	dev->hard_start_xmit = netdrv_start_xmit;
-	dev->stop = netdrv_close;
-	dev->set_multicast_list = netdrv_set_rx_mode;
-	dev->do_ioctl = netdrv_ioctl;
-	dev->tx_timeout = netdrv_tx_timeout;
+	dev->netdev_ops = &netdrv_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	dev->irq = pdev->irq;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 8f3872b8985..f35c609ba02 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1195,7 +1195,7 @@ static int el3_close(struct net_device *dev)
 
 static struct pcmcia_device_id tc574_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "3CCFEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index cdf661a6092..ec7cf5ac4f0 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -967,8 +967,8 @@ static struct pcmcia_device_id tc589_ids[] = {
 	PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
 	PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "3CXEM556.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 15b8fe61695..0e38d80fd25 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1130,7 +1130,7 @@ static int axnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		outb_p(ENISR_ALL, e8390_base + EN0_IMR);
 		spin_unlock_irqrestore(&ei_local->page_lock, flags);
 		dev->stats.tx_errors++;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/*
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 81e6660a433..479d5b49437 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -877,7 +877,7 @@ static int fjn_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (length > ETH_FRAME_LEN) {
 	    printk(KERN_NOTICE "%s: Attempting to send a large packet"
 		   " (%d bytes).\n", dev->name, length);
-	    return 1;
+	    return NETDEV_TX_BUSY;
 	}
 
 	DEBUG(4, "%s: Transmitting a packet of length %lu.\n",
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 48dbb35747d..37e05d3ab89 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1388,7 +1388,7 @@ static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->stats.tx_aborted_errors++;
 	printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
 	       dev->name);
-	return 1;
+	return NETDEV_TX_BUSY;
     }
     smc->saved_skb = skb;
 
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index a3685c0d22f..ef37d22c7e1 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1399,7 +1399,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev)
     DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
 	  dev->name, freespace, okay ? " (okay)":" (not enough)");
     if (!okay) { /* not enough space */
-	return 1;  /* upper layer may decide to requeue this packet */
+	return NETDEV_TX_BUSY;  /* upper layer may decide to requeue this packet */
     }
     /* send the packet */
     PutWord(XIRCREG_EDP, (u_short)pktlen);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 80124fac65f..1c35e1d637a 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1227,7 +1227,6 @@ static void pcnet32_rx_entry(struct net_device *dev,
 		dev->stats.rx_dropped++;
 		return;
 	}
-	skb->dev = dev;
 	if (!rx_in_place) {
 		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, pkt_len);	/* Make room */
@@ -1406,7 +1405,7 @@ static int pcnet32_poll(struct napi_struct *napi, int budget)
 
 		/* Set interrupt enable. */
 		lp->a.write_csr(ioaddr, CSR0, CSR0_INTEN);
-		mmiowb();
+
 		spin_unlock_irqrestore(&lp->lock, flags);
 	}
 	return work_done;
@@ -2598,7 +2597,7 @@ pcnet32_interrupt(int irq, void *dev_id)
 			val = lp->a.read_csr(ioaddr, CSR3);
 			val |= 0x5f00;
 			lp->a.write_csr(ioaddr, CSR3, val);
-			mmiowb();
+
 			__napi_schedule(&lp->napi);
 			break;
 		}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 7a3ec9d39a9..dd6f54d1b49 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -243,6 +243,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
 
 		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 		temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+		temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 
 		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 		if (err < 0)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index b754020cbe7..bd4e8d72dc0 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -113,7 +113,6 @@ int mdiobus_register(struct mii_bus *bus)
 		bus->reset(bus);
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
-		bus->phy_map[i] = NULL;
 		if ((bus->phy_mask & (1 << i)) == 0) {
 			struct phy_device *phydev;
 
@@ -150,6 +149,7 @@ void mdiobus_unregister(struct mii_bus *bus)
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		if (bus->phy_map[i])
 			device_unregister(&bus->phy_map[i]->dev);
+		bus->phy_map[i] = NULL;
 	}
 }
 EXPORT_SYMBOL(mdiobus_unregister);
@@ -188,35 +188,12 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
 	if (IS_ERR(phydev) || phydev == NULL)
 		return phydev;
 
-	/* There's a PHY at this address
-	 * We need to set:
-	 * 1) IRQ
-	 * 2) bus_id
-	 * 3) parent
-	 * 4) bus
-	 * 5) mii_bus
-	 * And, we need to register it */
-
-	phydev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
-
-	phydev->dev.parent = bus->parent;
-	phydev->dev.bus = &mdio_bus_type;
-	dev_set_name(&phydev->dev, PHY_ID_FMT, bus->id, addr);
-
-	phydev->bus = bus;
-
-	/* Run all of the fixups for this PHY */
-	phy_scan_fixups(phydev);
-
-	err = device_register(&phydev->dev);
+	err = phy_device_register(phydev);
 	if (err) {
-		printk(KERN_ERR "phy %d failed to register\n", addr);
 		phy_device_free(phydev);
-		phydev = NULL;
+		return NULL;
 	}
 
-	bus->phy_map[addr] = phydev;
-
 	return phydev;
 }
 EXPORT_SYMBOL(mdiobus_scan);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0a06e4fd37d..a2ece89622d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -39,20 +39,21 @@ MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
 MODULE_LICENSE("GPL");
 
-static struct phy_driver genphy_driver;
-extern int mdio_bus_init(void);
-extern void mdio_bus_exit(void);
-
 void phy_device_free(struct phy_device *phydev)
 {
 	kfree(phydev);
 }
+EXPORT_SYMBOL(phy_device_free);
 
 static void phy_device_release(struct device *dev)
 {
 	phy_device_free(to_phy_device(dev));
 }
 
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
+
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
@@ -166,6 +167,10 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 	dev->addr = addr;
 	dev->phy_id = phy_id;
 	dev->bus = bus;
+	dev->dev.parent = bus->parent;
+	dev->dev.bus = &mdio_bus_type;
+	dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
+	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
 
 	dev->state = PHY_DOWN;
 
@@ -235,6 +240,38 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
 
 	return dev;
 }
+EXPORT_SYMBOL(get_phy_device);
+
+/**
+ * phy_device_register - Register the phy device on the MDIO bus
+ * @phy_device: phy_device structure to be added to the MDIO bus
+ */
+int phy_device_register(struct phy_device *phydev)
+{
+	int err;
+
+	/* Don't register a phy if one is already registered at this
+	 * address */
+	if (phydev->bus->phy_map[phydev->addr])
+		return -EINVAL;
+	phydev->bus->phy_map[phydev->addr] = phydev;
+
+	/* Run all of the fixups for this PHY */
+	phy_scan_fixups(phydev);
+
+	err = device_register(&phydev->dev);
+	if (err) {
+		pr_err("phy %d failed to register\n", phydev->addr);
+		goto out;
+	}
+
+	return 0;
+
+ out:
+	phydev->bus->phy_map[phydev->addr] = NULL;
+	return err;
+}
+EXPORT_SYMBOL(phy_device_register);
 
 /**
  * phy_prepare_link - prepares the PHY layer to monitor link status
@@ -255,6 +292,33 @@ void phy_prepare_link(struct phy_device *phydev,
 }
 
 /**
+ * phy_connect_direct - connect an ethernet device to a specific phy_device
+ * @dev: the network device to connect
+ * @phydev: the pointer to the phy device
+ * @handler: callback function for state change notifications
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ */
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		       void (*handler)(struct net_device *), u32 flags,
+		       phy_interface_t interface)
+{
+	int rc;
+
+	rc = phy_attach_direct(dev, phydev, flags, interface);
+	if (rc)
+		return rc;
+
+	phy_prepare_link(phydev, handler);
+	phy_start_machine(phydev, NULL);
+	if (phydev->irq > 0)
+		phy_start_interrupts(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_connect_direct);
+
+/**
  * phy_connect - connect an ethernet device to a PHY device
  * @dev: the network device to connect
  * @bus_id: the id string of the PHY device to connect
@@ -275,18 +339,21 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
 		phy_interface_t interface)
 {
 	struct phy_device *phydev;
+	struct device *d;
+	int rc;
 
-	phydev = phy_attach(dev, bus_id, flags, interface);
-
-	if (IS_ERR(phydev))
-		return phydev;
-
-	phy_prepare_link(phydev, handler);
-
-	phy_start_machine(phydev, NULL);
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
+	if (!d) {
+		pr_err("PHY %s not found\n", bus_id);
+		return ERR_PTR(-ENODEV);
+	}
+	phydev = to_phy_device(d);
 
-	if (phydev->irq > 0)
-		phy_start_interrupts(phydev);
+	rc = phy_connect_direct(dev, phydev, handler, flags, interface);
+	if (rc)
+		return ERR_PTR(rc);
 
 	return phydev;
 }
@@ -310,9 +377,9 @@ void phy_disconnect(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_disconnect);
 
 /**
- * phy_attach - attach a network device to a particular PHY device
+ * phy_attach_direct - attach a network device to a given PHY device pointer
  * @dev: network device to attach
- * @bus_id: PHY device to attach
+ * @phydev: Pointer to phy_device to attach
  * @flags: PHY device's dev_flags
  * @interface: PHY device's interface
  *
@@ -323,22 +390,10 @@ EXPORT_SYMBOL(phy_disconnect);
  *     the attaching device, and given a callback for link status
  *     change.  The phy_device is returned to the attaching driver.
  */
-struct phy_device *phy_attach(struct net_device *dev,
-		const char *bus_id, u32 flags, phy_interface_t interface)
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+		      u32 flags, phy_interface_t interface)
 {
-	struct bus_type *bus = &mdio_bus_type;
-	struct phy_device *phydev;
-	struct device *d;
-
-	/* Search the list of PHY devices on the mdio bus for the
-	 * PHY with the requested name */
-	d = bus_find_device_by_name(bus, NULL, bus_id);
-	if (d) {
-		phydev = to_phy_device(d);
-	} else {
-		printk(KERN_ERR "%s not found\n", bus_id);
-		return ERR_PTR(-ENODEV);
-	}
+	struct device *d = &phydev->dev;
 
 	/* Assume that if there is no driver, that it doesn't
 	 * exist, and we should use the genphy driver. */
@@ -351,13 +406,12 @@ struct phy_device *phy_attach(struct net_device *dev,
 			err = device_bind_driver(d);
 
 		if (err)
-			return ERR_PTR(err);
+			return err;
 	}
 
 	if (phydev->attached_dev) {
-		printk(KERN_ERR "%s: %s already attached\n",
-				dev->name, bus_id);
-		return ERR_PTR(-EBUSY);
+		dev_err(&dev->dev, "PHY already attached\n");
+		return -EBUSY;
 	}
 
 	phydev->attached_dev = dev;
@@ -375,14 +429,49 @@ struct phy_device *phy_attach(struct net_device *dev,
 		err = phy_scan_fixups(phydev);
 
 		if (err < 0)
-			return ERR_PTR(err);
+			return err;
 
 		err = phydev->drv->config_init(phydev);
 
 		if (err < 0)
-			return ERR_PTR(err);
+			return err;
 	}
 
+	return 0;
+}
+EXPORT_SYMBOL(phy_attach_direct);
+
+/**
+ * phy_attach - attach a network device to a particular PHY device
+ * @dev: network device to attach
+ * @bus_id: Bus ID of PHY device to attach
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Same as phy_attach_direct() except that a PHY bus_id
+ *     string is passed instead of a pointer to a struct phy_device.
+ */
+struct phy_device *phy_attach(struct net_device *dev,
+		const char *bus_id, u32 flags, phy_interface_t interface)
+{
+	struct bus_type *bus = &mdio_bus_type;
+	struct phy_device *phydev;
+	struct device *d;
+	int rc;
+
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device_by_name(bus, NULL, bus_id);
+	if (!d) {
+		pr_err("PHY %s not found\n", bus_id);
+		return ERR_PTR(-ENODEV);
+	}
+	phydev = to_phy_device(d);
+
+	rc = phy_attach_direct(dev, phydev, flags, interface);
+	if (rc)
+		return ERR_PTR(rc);
+
 	return phydev;
 }
 EXPORT_SYMBOL(phy_attach);
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 0be0f0b164f..7a62f781fef 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -955,12 +955,12 @@ plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
 	struct plip_local *snd = &nl->snd_data;
 
 	if (netif_queue_stopped(dev))
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	/* We may need to grab the bus */
 	if (!nl->port_owner) {
 		if (parport_claim(nl->pardev))
-			return 1;
+			return NETDEV_TX_BUSY;
 		nl->port_owner = 1;
 	}
 
@@ -969,7 +969,7 @@ plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
 	if (skb->len > dev->mtu + dev->hard_header_len) {
 		printk(KERN_WARNING "%s: packet too big, %d.\n", dev->name, (int)skb->len);
 		netif_start_queue (dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (net_debug > 2)
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 8ee91421db1..639d11bc444 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1054,6 +1054,7 @@ static void ppp_setup(struct net_device *dev)
 	dev->type = ARPHRD_PPP;
 	dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
 	dev->features |= NETIF_F_NETNS_LOCAL;
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 }
 
 /*
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 5b07dd8e5c0..e7935d09c89 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -433,8 +433,7 @@ static void pppol2tp_recv_dequeue_skb(struct pppol2tp_session *session, struct s
 		 *   to the inner packet either
 		 */
 		secpath_reset(skb);
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 
 		po = pppox_sk(session_sock);
@@ -976,7 +975,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh
 	/* Calculate UDP checksum if configured to do so */
 	if (sk_tun->sk_no_check == UDP_CSUM_NOXMIT)
 		skb->ip_summed = CHECKSUM_NONE;
-	else if (!(skb->dst->dev->features & NETIF_F_V4_CSUM)) {
+	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
 		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
@@ -1172,14 +1171,14 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	nf_reset(skb);
 
 	/* Get routing info from the tunnel socket */
-	dst_release(skb->dst);
-	skb->dst = dst_clone(__sk_dst_get(sk_tun));
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst_clone(__sk_dst_get(sk_tun)));
 	pppol2tp_skb_set_owner_w(skb, sk_tun);
 
 	/* Calculate UDP checksum if configured to do so */
 	if (sk_tun->sk_no_check == UDP_CSUM_NOXMIT)
 		skb->ip_summed = CHECKSUM_NONE;
-	else if (!(skb->dst->dev->features & NETIF_F_V4_CSUM)) {
+	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
 		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
@@ -1238,8 +1237,7 @@ static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel)
 	struct pppol2tp_session *session;
 	struct sock *sk;
 
-	if (tunnel == NULL)
-		BUG();
+	BUG_ON(tunnel == NULL);
 
 	PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
 	       "%s: closing all sessions...\n", tunnel->name);
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 30900b30d53..2b38f39924a 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1648,7 +1648,7 @@ static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
 		result = -ENOMEM;
 		goto fail_alloc_card;
 	}
-	ps3_system_bus_set_driver_data(dev, card);
+	ps3_system_bus_set_drvdata(dev, card);
 	card->dev = dev;
 
 	/* get internal vlan info */
@@ -1749,7 +1749,7 @@ fail_alloc_irq:
 					       bus_id(card),
 					       0, 0);
 fail_status_indicator:
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 	kfree(netdev_card(netdev)->unalign);
 	free_netdev(netdev);
 fail_alloc_card:
@@ -1766,7 +1766,7 @@ fail_open:
 
 static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
 {
-	struct gelic_card *card = ps3_system_bus_get_driver_data(dev);
+	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
 	struct net_device *netdev0;
 	pr_debug("%s: called\n", __func__);
 
@@ -1803,7 +1803,7 @@ static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
 	kfree(netdev_card(netdev0)->unalign);
 	free_netdev(netdev0);
 
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 
 	ps3_dma_region_free(dev->d_region);
 
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index cadc32c94c1..8a823ecc99a 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2617,7 +2617,6 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
 			    &port_regs->CommonRegs.reqQProducerIndex,
 			    qdev->req_producer_index);
 
-	ndev->trans_start = jiffies;
 	if (netif_msg_tx_queued(qdev))
 		printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n",
 		       ndev->name, qdev->req_producer_index, skb->len);
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index fcb159e4df5..156e02e8905 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -27,6 +27,8 @@
 			   "%s: " fmt, __func__, ##args);  \
        } while (0)
 
+#define WQ_ADDR_ALIGN	0x3	/* 4 byte alignment */
+
 #define QLGE_VENDOR_ID    0x1077
 #define QLGE_DEVICE_ID_8012	0x8012
 #define QLGE_DEVICE_ID_8000	0x8000
@@ -39,7 +41,18 @@
 
 #define NUM_SMALL_BUFFERS   512
 #define NUM_LARGE_BUFFERS   512
+#define DB_PAGE_SIZE 4096
+
+/* Calculate the number of (4k) pages required to
+ * contain a buffer queue of the given length.
+ */
+#define MAX_DB_PAGES_PER_BQ(x) \
+		(((x * sizeof(u64)) / DB_PAGE_SIZE) + \
+		(((x * sizeof(u64)) % DB_PAGE_SIZE) ? 1 : 0))
 
+#define RX_RING_SHADOW_SPACE	(sizeof(u64) + \
+		MAX_DB_PAGES_PER_BQ(NUM_SMALL_BUFFERS) * sizeof(u64) + \
+		MAX_DB_PAGES_PER_BQ(NUM_LARGE_BUFFERS) * sizeof(u64))
 #define SMALL_BUFFER_SIZE 256
 #define LARGE_BUFFER_SIZE	PAGE_SIZE
 #define MAX_SPLIT_SIZE 1023
@@ -50,7 +63,7 @@
 #define MAX_INTER_FRAME_WAIT 10	/* 10 usec max interframe-wait for coalescing */
 #define DFLT_INTER_FRAME_WAIT (MAX_INTER_FRAME_WAIT/2)
 #define UDELAY_COUNT 3
-#define UDELAY_DELAY 10
+#define UDELAY_DELAY 100
 
 
 #define TX_DESC_PER_IOCB 8
@@ -63,7 +76,16 @@
 #define TX_DESC_PER_OAL 0
 #endif
 
-#define DB_PAGE_SIZE 4096
+/* MPI test register definitions. This register
+ * is used for determining alternate NIC function's
+ * PCI->func number.
+ */
+enum {
+	MPI_TEST_FUNC_PORT_CFG = 0x1002,
+	MPI_TEST_NIC1_FUNC_SHIFT = 1,
+	MPI_TEST_NIC2_FUNC_SHIFT = 5,
+	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+};
 
 /*
  * Processor Address Register (PROC_ADDR) bit definitions.
@@ -1430,7 +1452,10 @@ struct ql_adapter {
 
 	/* Hardware information */
 	u32 chip_rev_id;
+	u32 fw_rev_id;
 	u32 func;		/* PCI function for this adapter */
+	u32 alt_func;		/* PCI function for alternate adapter */
+	u32 port;		/* Port number this adapter */
 
 	spinlock_t adapter_lock;
 	spinlock_t hw_lock;
@@ -1580,6 +1605,8 @@ void ql_mpi_idc_work(struct work_struct *work);
 void ql_mpi_port_cfg_work(struct work_struct *work);
 int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
+int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
+int ql_mb_about_fw(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 913b2a5fafc..37c99fe7977 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -293,7 +293,10 @@ static void ql_get_drvinfo(struct net_device *ndev,
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	strncpy(drvinfo->driver, qlge_driver_name, 32);
 	strncpy(drvinfo->version, qlge_driver_version, 32);
-	strncpy(drvinfo->fw_version, "N/A", 32);
+	snprintf(drvinfo->fw_version, 32, "v%d.%d.%d",
+		 (qdev->fw_rev_id & 0x00ff0000) >> 16,
+		 (qdev->fw_rev_id & 0x0000ff00) >> 8,
+		 (qdev->fw_rev_id & 0x000000ff));
 	strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
 	drvinfo->n_stats = 0;
 	drvinfo->testinfo_len = 0;
@@ -401,6 +404,7 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_csum,
 	.get_sg = ethtool_op_get_sg,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c92ced24794..90d1f76c0e8 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -675,11 +675,12 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 	int status;
 	__le32 *p = (__le32 *)&qdev->flash;
 	u32 offset;
+	u8 mac_addr[6];
 
 	/* Get flash offset for function and adjust
 	 * for dword access.
 	 */
-	if (!qdev->func)
+	if (!qdev->port)
 		offset = FUNC0_FLASH_OFFSET / sizeof(u32);
 	else
 		offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -705,14 +706,26 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 		goto exit;
 	}
 
-	if (!is_valid_ether_addr(qdev->flash.flash_params_8000.mac_addr)) {
+	/* Extract either manufacturer or BOFM modified
+	 * MAC address.
+	 */
+	if (qdev->flash.flash_params_8000.data_type1 == 2)
+		memcpy(mac_addr,
+			qdev->flash.flash_params_8000.mac_addr1,
+			qdev->ndev->addr_len);
+	else
+		memcpy(mac_addr,
+			qdev->flash.flash_params_8000.mac_addr,
+			qdev->ndev->addr_len);
+
+	if (!is_valid_ether_addr(mac_addr)) {
 		QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
 		status = -EINVAL;
 		goto exit;
 	}
 
 	memcpy(qdev->ndev->dev_addr,
-		qdev->flash.flash_params_8000.mac_addr,
+		mac_addr,
 		qdev->ndev->addr_len);
 
 exit:
@@ -731,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 	/* Second function's parameters follow the first
 	 * function's.
 	 */
-	if (qdev->func)
+	if (qdev->port)
 		offset = size;
 
 	if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -837,6 +850,13 @@ exit:
 static int ql_8000_port_initialize(struct ql_adapter *qdev)
 {
 	int status;
+	/*
+	 * Get MPI firmware version for driver banner
+	 * and ethool info.
+	 */
+	status = ql_mb_about_fw(qdev);
+	if (status)
+		goto exit;
 	status = ql_mb_get_fw_state(qdev);
 	if (status)
 		goto exit;
@@ -1518,6 +1538,22 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 		return;
 	}
 
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
+					ib_mac_rsp->flags2);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
 	prefetch(skb->data);
 	skb->dev = ndev;
 	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
@@ -1540,7 +1576,6 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 	 * csum or frame errors.
 	 */
 	if (qdev->rx_csum &&
-		!(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -2108,7 +2143,6 @@ static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	wmb();
 
 	ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg);
-	ndev->trans_start = jiffies;
 	QPRINTK(qdev, TX_QUEUED, DEBUG, "tx queued, slot %d, len %d\n",
 		tx_ring->prod_idx, skb->len);
 
@@ -2203,7 +2237,7 @@ static int ql_alloc_tx_resources(struct ql_adapter *qdev,
 				 &tx_ring->wq_base_dma);
 
 	if ((tx_ring->wq_base == NULL)
-	    || tx_ring->wq_base_dma & (tx_ring->wq_size - 1)) {
+		|| tx_ring->wq_base_dma & WQ_ADDR_ALIGN) {
 		QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n");
 		return -ENOMEM;
 	}
@@ -2518,14 +2552,16 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 {
 	struct cqicb *cqicb = &rx_ring->cqicb;
 	void *shadow_reg = qdev->rx_ring_shadow_reg_area +
-	    (rx_ring->cq_id * sizeof(u64) * 4);
+		(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
 	u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma +
-	    (rx_ring->cq_id * sizeof(u64) * 4);
+		(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
 	void __iomem *doorbell_area =
 	    qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id));
 	int err = 0;
 	u16 bq_len;
 	u64 tmp;
+	__le64 *base_indirect_ptr;
+	int page_entries;
 
 	/* Set up the shadow registers for this ring. */
 	rx_ring->prod_idx_sh_reg = shadow_reg;
@@ -2534,8 +2570,8 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	shadow_reg_dma += sizeof(u64);
 	rx_ring->lbq_base_indirect = shadow_reg;
 	rx_ring->lbq_base_indirect_dma = shadow_reg_dma;
-	shadow_reg += sizeof(u64);
-	shadow_reg_dma += sizeof(u64);
+	shadow_reg += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
+	shadow_reg_dma += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
 	rx_ring->sbq_base_indirect = shadow_reg;
 	rx_ring->sbq_base_indirect_dma = shadow_reg_dma;
 
@@ -2572,7 +2608,14 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	if (rx_ring->lbq_len) {
 		cqicb->flags |= FLAGS_LL;	/* Load lbq values */
 		tmp = (u64)rx_ring->lbq_base_dma;;
-		*((__le64 *) rx_ring->lbq_base_indirect) = cpu_to_le64(tmp);
+		base_indirect_ptr = (__le64 *) rx_ring->lbq_base_indirect;
+		page_entries = 0;
+		do {
+			*base_indirect_ptr = cpu_to_le64(tmp);
+			tmp += DB_PAGE_SIZE;
+			base_indirect_ptr++;
+			page_entries++;
+		} while (page_entries < MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
 		cqicb->lbq_addr =
 		    cpu_to_le64(rx_ring->lbq_base_indirect_dma);
 		bq_len = (rx_ring->lbq_buf_size == 65536) ? 0 :
@@ -2589,7 +2632,14 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	if (rx_ring->sbq_len) {
 		cqicb->flags |= FLAGS_LS;	/* Load sbq values */
 		tmp = (u64)rx_ring->sbq_base_dma;;
-		*((__le64 *) rx_ring->sbq_base_indirect) = cpu_to_le64(tmp);
+		base_indirect_ptr = (__le64 *) rx_ring->sbq_base_indirect;
+		page_entries = 0;
+		do {
+			*base_indirect_ptr = cpu_to_le64(tmp);
+			tmp += DB_PAGE_SIZE;
+			base_indirect_ptr++;
+			page_entries++;
+		} while (page_entries < MAX_DB_PAGES_PER_BQ(rx_ring->sbq_len));
 		cqicb->sbq_addr =
 		    cpu_to_le64(rx_ring->sbq_base_indirect_dma);
 		cqicb->sbq_buf_size =
@@ -3174,7 +3224,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 	if (value & RST_FO_FR) {
 		QPRINTK(qdev, IFDOWN, ERR,
-			"ETIMEOUT!!! errored out of resetting the chip!\n");
+			"ETIMEDOUT!!! errored out of resetting the chip!\n");
 		status = -ETIMEDOUT;
 	}
 
@@ -3186,9 +3236,10 @@ static void ql_display_dev_info(struct net_device *ndev)
 	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
 	QPRINTK(qdev, PROBE, INFO,
-		"Function #%d, NIC Roll %d, NIC Rev = %d, "
+		"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
 		"XG Roll = %d, XG Rev = %d.\n",
 		qdev->func,
+		qdev->port,
 		qdev->chip_rev_id & 0x0000000f,
 		qdev->chip_rev_id >> 4 & 0x0000000f,
 		qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3264,7 +3315,6 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 	err = ql_adapter_initialize(qdev);
 	if (err) {
 		QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
-		spin_unlock(&qdev->hw_lock);
 		goto err_init;
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3361,7 +3411,6 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 	 * completion handler rx_rings.
 	 */
 	qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
-	netif_set_gso_max_size(qdev->ndev, 65536);
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
@@ -3644,12 +3693,53 @@ static struct nic_operations qla8000_nic_ops = {
 	.port_initialize	= ql_8000_port_initialize,
 };
 
+/* Find the pcie function number for the other NIC
+ * on this chip.  Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work.  Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
+{
+	int status = 0;
+	u32 temp;
+	u32 nic_func1, nic_func2;
+
+	status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+			&temp);
+	if (status)
+		return status;
+
+	nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+			MPI_TEST_NIC_FUNC_MASK);
+	nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+			MPI_TEST_NIC_FUNC_MASK);
+
+	if (qdev->func == nic_func1)
+		qdev->alt_func = nic_func2;
+	else if (qdev->func == nic_func2)
+		qdev->alt_func = nic_func1;
+	else
+		status = -EIO;
+
+	return status;
+}
 
-static void ql_get_board_info(struct ql_adapter *qdev)
+static int ql_get_board_info(struct ql_adapter *qdev)
 {
+	int status;
 	qdev->func =
 	    (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
-	if (qdev->func) {
+	if (qdev->func > 3)
+		return -EIO;
+
+	status = ql_get_alt_pcie_func(qdev);
+	if (status)
+		return status;
+
+	qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+	if (qdev->port) {
 		qdev->xg_sem_mask = SEM_XGMAC1_MASK;
 		qdev->port_link_up = STS_PL1;
 		qdev->port_init = STS_PI1;
@@ -3668,6 +3758,7 @@ static void ql_get_board_info(struct ql_adapter *qdev)
 		qdev->nic_ops = &qla8012_nic_ops;
 	else if (qdev->device_id == QLGE_DEVICE_ID_8000)
 		qdev->nic_ops = &qla8000_nic_ops;
+	return status;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3762,7 +3853,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
 	qdev->ndev = ndev;
 	qdev->pdev = pdev;
-	ql_get_board_info(qdev);
+	err = ql_get_board_info(qdev);
+	if (err) {
+		dev_err(&pdev->dev, "Register access failed.\n");
+		err = -EIO;
+		goto err_out;
+	}
 	qdev->msg_enable = netif_msg_init(debug, default_msg);
 	spin_lock_init(&qdev->hw_lock);
 	spin_lock_init(&qdev->stats_lock);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 9f81b797f10..71afbf8b9c5 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -90,14 +90,14 @@ static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
  */
 static int ql_wait_mbx_cmd_cmplt(struct ql_adapter *qdev)
 {
-	int count = 50;	/* TODO: arbitrary for now. */
+	int count = 100;
 	u32 value;
 
 	do {
 		value = ql_read32(qdev, STS);
 		if (value & STS_PI)
 			return 0;
-		udelay(UDELAY_DELAY); /* 10us */
+		mdelay(UDELAY_DELAY); /* 100ms */
 	} while (--count);
 	return -ETIMEDOUT;
 }
@@ -141,7 +141,7 @@ end:
 /* We are being asked by firmware to accept
  * a change to the port.  This is only
  * a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode. We wake up a worker
+ * parameters, or loopback mode. We wake up a worker
  * to handler processing this since a mailbox command
  * will need to be sent to ACK the request.
  */
@@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* We are being asked by firmware to accept
 	 * a change to the port.  This is only
 	 * a change to max frame sizes (Tx/Rx), pause
-	 * paramters, or loopback mode.
+	 * parameters, or loopback mode.
 	 */
 	case AEN_IDC_REQ:
 		status = ql_idc_req_aen(qdev);
@@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* Process and inbound IDC event.
 	 * This will happen when we're trying to
 	 * change tx/rx max frame size, change pause
-	 * paramters or loopback mode.
+	 * parameters or loopback mode.
 	 */
 	case AEN_IDC_CMPLT:
 	case AEN_IDC_EXT:
@@ -453,6 +453,13 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	}
 end:
 	ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+	/* Restore the original mailbox count to
+	 * what the caller asked for.  This can get
+	 * changed when a mailbox command is waiting
+	 * for a response and an AEN arrives and
+	 * is handled.
+	 * */
+	mbcp->out_count = orig_count;
 	return status;
 }
 
@@ -540,6 +547,40 @@ end:
 	return status;
 }
 
+
+/* Get MPI firmware version. This will be used for
+ * driver banner and for ethtool info.
+ * Returns zero on success.
+ */
+int ql_mb_about_fw(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 3;
+
+	mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed about firmware command\n");
+		status = -EIO;
+	}
+
+	/* Store the firmware version */
+	qdev->fw_rev_id = mbcp->mbox_out[1];
+
+	return status;
+}
+
 /* Get functional state for MPI firmware.
  * Returns zero on success.
  */
@@ -754,7 +795,6 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 {
 	struct ql_adapter *qdev =
 	    container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
-	struct net_device *ndev = qdev->ndev;
 	int status;
 
 	status = ql_mb_get_port_cfg(qdev);
@@ -764,9 +804,7 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 		goto err;
 	}
 
-	if (ndev->mtu <= 2500)
-		goto end;
-	else if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
+	if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
 			qdev->max_frame_size ==
 			CFG_DEFAULT_MAX_FRAME_SIZE)
 		goto end;
@@ -831,13 +869,19 @@ void ql_mpi_work(struct work_struct *work)
 	    container_of(work, struct ql_adapter, mpi_work.work);
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
+	int err = 0;
 
 	mutex_lock(&qdev->mpi_mutex);
 
 	while (ql_read32(qdev, STS) & STS_PI) {
 		memset(mbcp, 0, sizeof(struct mbox_params));
 		mbcp->out_count = 1;
-		ql_mpi_handler(qdev, mbcp);
+		/* Don't continue if an async event
+		 * did not complete properly.
+		 */
+		err = ql_mpi_handler(qdev, mbcp);
+		if (err)
+			break;
 	}
 
 	mutex_unlock(&qdev->mpi_mutex);
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 6f97b47d74a..ed63d23a645 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
 #include <asm/processor.h>
 
 #define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.22"
-#define DRV_RELDATE	"25Mar2009"
+#define DRV_VERSION	"0.23"
+#define DRV_RELDATE	"05May2009"
 
 /* PHY CHIP Address */
 #define PHY1_ADDR	1	/* For MAC1 */
@@ -401,6 +401,9 @@ static void r6040_init_mac_regs(struct net_device *dev)
 	 * we may got called by r6040_tx_timeout which has left
 	 * some unsent tx buffers */
 	iowrite16(0x01, ioaddr + MTPR);
+
+	/* Check media */
+	mii_check_media(&lp->mii_if, 1, 1);
 }
 
 static void r6040_tx_timeout(struct net_device *dev)
@@ -528,6 +531,8 @@ static int r6040_phy_mode_chk(struct net_device *dev)
 			phy_dat = 0x0000;
 	}
 
+	mii_check_media(&lp->mii_if, 0, 1);
+
 	return phy_dat;
 };
 
@@ -742,6 +747,14 @@ static int r6040_up(struct net_device *dev)
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 	int ret;
+	u16 val;
+
+	/* Check presence of a second PHY */
+	val = r6040_phy_read(ioaddr, lp->phy_addr, 2);
+	if (val == 0xFFFF) {
+		printk(KERN_ERR DRV_NAME " no second PHY attached\n");
+		return -EIO;
+	}
 
 	/* Initialise and alloc RX/TX buffers */
 	r6040_init_txbufs(dev);
@@ -802,7 +815,6 @@ static void r6040_timer(unsigned long data)
 		lp->phy_mode = phy_mode;
 		lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
 		iowrite16(lp->mcr0, ioaddr);
-		printk(KERN_INFO "Link Change %x \n", ioread16(ioaddr));
 	}
 
 	/* Timer active again */
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 3b19e0ce290..35196faa084 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -93,6 +93,7 @@ static const int multicast_filter_limit = 32;
 #define RTL_R32(reg)		((unsigned long) readl (ioaddr + (reg)))
 
 enum mac_version {
+	RTL_GIGA_MAC_NONE   = 0x00,
 	RTL_GIGA_MAC_VER_01 = 0x01, // 8169
 	RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
 	RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
@@ -478,7 +479,6 @@ struct rtl8169_private {
 	u16 intr_event;
 	u16 napi_event;
 	u16 intr_mask;
-	int phy_auto_nego_reg;
 	int phy_1000_ctrl_reg;
 #ifdef CONFIG_R8169_VLAN
 	struct vlan_group *vlgrp;
@@ -843,76 +843,81 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
-	int auto_nego, giga_ctrl;
-
-	auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
-	auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-		       ADVERTISE_100HALF | ADVERTISE_100FULL);
-	giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
-	giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+	int giga_ctrl, bmcr;
 
 	if (autoneg == AUTONEG_ENABLE) {
+		int auto_nego;
+
+		auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
 		auto_nego |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
 			      ADVERTISE_100HALF | ADVERTISE_100FULL);
-		giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
-	} else {
-		if (speed == SPEED_10)
-			auto_nego |= ADVERTISE_10HALF | ADVERTISE_10FULL;
-		else if (speed == SPEED_100)
-			auto_nego |= ADVERTISE_100HALF | ADVERTISE_100FULL;
-		else if (speed == SPEED_1000)
-			giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
-
-		if (duplex == DUPLEX_HALF)
-			auto_nego &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
-
-		if (duplex == DUPLEX_FULL)
-			auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
+		auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 
-		/* This tweak comes straight from Realtek's driver. */
-		if ((speed == SPEED_100) && (duplex == DUPLEX_HALF) &&
-		    ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
-		     (tp->mac_version == RTL_GIGA_MAC_VER_16))) {
-			auto_nego = ADVERTISE_100HALF | ADVERTISE_CSMA;
-		}
-	}
+		giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
+		giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 
-	/* The 8100e/8101e/8102e do Fast Ethernet only. */
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_07) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_08) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_09) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_10) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_13) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_14) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_15) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_16)) {
-		if ((giga_ctrl & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)) &&
-		    netif_msg_link(tp)) {
+		/* The 8100e/8101e/8102e do Fast Ethernet only. */
+		if ((tp->mac_version != RTL_GIGA_MAC_VER_07) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_08) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_09) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_10) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_13) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_14) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_16)) {
+			giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+		} else if (netif_msg_link(tp)) {
 			printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
 			       dev->name);
 		}
-		giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
-	}
 
-	auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+
+		if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
+		    (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
+		    (tp->mac_version >= RTL_GIGA_MAC_VER_17)) {
+			/*
+			 * Wake up the PHY.
+			 * Vendor specific (0x1f) and reserved (0x0e) MII
+			 * registers.
+			 */
+			mdio_write(ioaddr, 0x1f, 0x0000);
+			mdio_write(ioaddr, 0x0e, 0x0000);
+		}
+
+		mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
+		mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
+	} else {
+		giga_ctrl = 0;
+
+		if (speed == SPEED_10)
+			bmcr = 0;
+		else if (speed == SPEED_100)
+			bmcr = BMCR_SPEED100;
+		else
+			return -EINVAL;
+
+		if (duplex == DUPLEX_FULL)
+			bmcr |= BMCR_FULLDPLX;
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
-	    (tp->mac_version >= RTL_GIGA_MAC_VER_17)) {
-		/*
-		 * Wake up the PHY.
-		 * Vendor specific (0x1f) and reserved (0x0e) MII registers.
-		 */
 		mdio_write(ioaddr, 0x1f, 0x0000);
-		mdio_write(ioaddr, 0x0e, 0x0000);
 	}
 
-	tp->phy_auto_nego_reg = auto_nego;
 	tp->phy_1000_ctrl_reg = giga_ctrl;
 
-	mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
-	mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
-	mdio_write(ioaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
+	mdio_write(ioaddr, MII_BMCR, bmcr);
+
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+	    (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+		if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
+			mdio_write(ioaddr, 0x17, 0x2138);
+			mdio_write(ioaddr, 0x0e, 0x0260);
+		} else {
+			mdio_write(ioaddr, 0x17, 0x2108);
+			mdio_write(ioaddr, 0x0e, 0x0000);
+		}
+	}
+
 	return 0;
 }
 
@@ -1295,7 +1300,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		{ 0xfc800000, 0x00800000,	RTL_GIGA_MAC_VER_02 },
 		{ 0xfc800000, 0x00000000,	RTL_GIGA_MAC_VER_01 },
 
-		{ 0x00000000, 0x00000000,	RTL_GIGA_MAC_VER_01 }	/* Catch-all */
+		/* Catch-all */
+		{ 0x00000000, 0x00000000,	RTL_GIGA_MAC_NONE   }
 	}, *p = mac_info;
 	u32 reg;
 
@@ -1303,12 +1309,6 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 	while ((reg & p->mask) != p->val)
 		p++;
 	tp->mac_version = p->mac_version;
-
-	if (p->mask == 0x00000000) {
-		struct pci_dev *pdev = tp->pci_dev;
-
-		dev_info(&pdev->dev, "unknown MAC (%08x)\n", reg);
-	}
 }
 
 static void rtl8169_print_mac_version(struct rtl8169_private *tp)
@@ -1884,6 +1884,7 @@ static const struct rtl_cfg_info {
 	u16 intr_event;
 	u16 napi_event;
 	unsigned features;
+	u8 default_ver;
 } rtl_cfg_infos [] = {
 	[RTL_CFG_0] = {
 		.hw_start	= rtl_hw_start_8169,
@@ -1892,7 +1893,8 @@ static const struct rtl_cfg_info {
 		.intr_event	= SYSErr | LinkChg | RxOverflow |
 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
-		.features	= RTL_FEATURE_GMII
+		.features	= RTL_FEATURE_GMII,
+		.default_ver	= RTL_GIGA_MAC_VER_01,
 	},
 	[RTL_CFG_1] = {
 		.hw_start	= rtl_hw_start_8168,
@@ -1901,7 +1903,8 @@ static const struct rtl_cfg_info {
 		.intr_event	= SYSErr | LinkChg | RxOverflow |
 				  TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
-		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI
+		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI,
+		.default_ver	= RTL_GIGA_MAC_VER_11,
 	},
 	[RTL_CFG_2] = {
 		.hw_start	= rtl_hw_start_8101,
@@ -1910,7 +1913,8 @@ static const struct rtl_cfg_info {
 		.intr_event	= SYSErr | LinkChg | RxOverflow | PCSTimeout |
 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
-		.features	= RTL_FEATURE_MSI
+		.features	= RTL_FEATURE_MSI,
+		.default_ver	= RTL_GIGA_MAC_VER_13,
 	}
 };
 
@@ -2091,6 +2095,15 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* Identify chip attached to board */
 	rtl8169_get_mac_version(tp, ioaddr);
 
+	/* Use appropriate default if unknown */
+	if (tp->mac_version == RTL_GIGA_MAC_NONE) {
+		if (netif_msg_probe(tp)) {
+			dev_notice(&pdev->dev,
+				   "unknown MAC, using family default\n");
+		}
+		tp->mac_version = cfg->default_ver;
+	}
+
 	rtl8169_print_mac_version(tp);
 
 	for (i = 0; i < ARRAY_SIZE(rtl_chip_info); i++) {
@@ -2098,13 +2111,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			break;
 	}
 	if (i == ARRAY_SIZE(rtl_chip_info)) {
-		/* Unknown chip: assume array element #0, original RTL-8169 */
-		if (netif_msg_probe(tp)) {
-			dev_printk(KERN_DEBUG, &pdev->dev,
-				"unknown chip version, assuming %s\n",
-				rtl_chip_info[0].name);
-		}
-		i = 0;
+		dev_err(&pdev->dev,
+			"driver bug, MAC version not found in rtl_chip_info\n");
+		goto err_out_msi_5;
 	}
 	tp->chipset = i;
 
@@ -3269,8 +3278,6 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
 	txd->opts1 = cpu_to_le32(status);
 
-	dev->trans_start = jiffies;
-
 	tp->cur_tx += frags + 1;
 
 	smp_wmb();
@@ -3371,7 +3378,7 @@ static void rtl8169_tx_interrupt(struct net_device *dev,
 		rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, tp->TxDescArray + entry);
 
 		if (status & LastFrag) {
-			dev_kfree_skb_irq(tx_skb->skb);
+			dev_kfree_skb(tx_skb->skb);
 			tx_skb->skb = NULL;
 		}
 		dirty_tx++;
@@ -3802,16 +3809,13 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
 	return &dev->stats;
 }
 
-#ifdef CONFIG_PM
-
-static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
+static void rtl8169_net_suspend(struct net_device *dev)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 
 	if (!netif_running(dev))
-		goto out_pci_suspend;
+		return;
 
 	netif_device_detach(dev);
 	netif_stop_queue(dev);
@@ -3823,24 +3827,25 @@ static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
 	rtl8169_rx_missed(dev, ioaddr);
 
 	spin_unlock_irq(&tp->lock);
+}
 
-out_pci_suspend:
-	pci_save_state(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev, state),
-		(tp->features & RTL_FEATURE_WOL) ? 1 : 0);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	rtl8169_net_suspend(dev);
 
 	return 0;
 }
 
-static int rtl8169_resume(struct pci_dev *pdev)
+static int rtl8169_resume(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct net_device *dev = pci_get_drvdata(pdev);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	pci_enable_wake(pdev, PCI_D0, 0);
-
 	if (!netif_running(dev))
 		goto out;
 
@@ -3851,23 +3856,42 @@ out:
 	return 0;
 }
 
+static struct dev_pm_ops rtl8169_pm_ops = {
+	.suspend = rtl8169_suspend,
+	.resume = rtl8169_resume,
+	.freeze = rtl8169_suspend,
+	.thaw = rtl8169_resume,
+	.poweroff = rtl8169_suspend,
+	.restore = rtl8169_resume,
+};
+
+#define RTL8169_PM_OPS	(&rtl8169_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define RTL8169_PM_OPS	NULL
+
+#endif /* !CONFIG_PM */
+
 static void rtl_shutdown(struct pci_dev *pdev)
 {
-	rtl8169_suspend(pdev, PMSG_SUSPEND);
-}
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	rtl8169_net_suspend(dev);
 
-#endif /* CONFIG_PM */
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, true);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
 
 static struct pci_driver rtl8169_pci_driver = {
 	.name		= MODULENAME,
 	.id_table	= rtl8169_pci_tbl,
 	.probe		= rtl8169_init_one,
 	.remove		= __devexit_p(rtl8169_remove_one),
-#ifdef CONFIG_PM
-	.suspend	= rtl8169_suspend,
-	.resume		= rtl8169_resume,
 	.shutdown	= rtl_shutdown,
-#endif
+	.driver.pm	= RTL8169_PM_OPS,
 };
 
 static int __init rtl8169_init_module(void)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index ec59e29807a..8702e7acdee 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -428,6 +428,15 @@ static const struct ethtool_ops rionet_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 };
 
+static const struct net_device_ops rionet_netdev_ops = {
+	.ndo_open		= rionet_open,
+	.ndo_stop		= rionet_close,
+	.ndo_start_xmit		= rionet_start_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int rionet_setup_netdev(struct rio_mport *mport)
 {
 	int rc = 0;
@@ -466,10 +475,7 @@ static int rionet_setup_netdev(struct rio_mport *mport)
 	ndev->dev_addr[4] = device_id >> 8;
 	ndev->dev_addr[5] = device_id & 0xff;
 
-	/* Fill in the driver function table */
-	ndev->open = &rionet_open;
-	ndev->hard_start_xmit = &rionet_start_xmit;
-	ndev->stop = &rionet_close;
+	ndev->netdev_ops = &rionet_netdev_ops;
 	ndev->mtu = RIO_MAX_MSG_SIZE - 14;
 	ndev->features = NETIF_F_LLTX;
 	SET_ETHTOOL_OPS(ndev, &rionet_ethtool_ops);
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index d890829a9ac..81dbcbb910f 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1425,7 +1425,7 @@ static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (!(new_skb = dev_alloc_skb(len + 8))) {
 			dev_kfree_skb(skb);
 			netif_wake_queue(dev);
-			return -EBUSY;
+			return NETDEV_TX_OK;
 		}
 		skb_reserve(new_skb, 8);
 		skb_put(new_skb, len);
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index f8274f8941e..416669fd68c 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -271,11 +271,6 @@ struct XENA_dev_config {
 	u64 mdio_control;
 #define MDIO_MMD_INDX_ADDR(val)		vBIT(val, 0, 16)
 #define MDIO_MMD_DEV_ADDR(val)		vBIT(val, 19, 5)
-#define MDIO_MMD_PMA_DEV_ADDR		0x1
-#define MDIO_MMD_PMD_DEV_ADDR		0x1
-#define MDIO_MMD_WIS_DEV_ADDR		0x2
-#define MDIO_MMD_PCS_DEV_ADDR		0x3
-#define MDIO_MMD_PHYXS_DEV_ADDR		0x4
 #define MDIO_MMS_PRT_ADDR(val)		vBIT(val, 27, 5)
 #define MDIO_CTRL_START_TRANS(val)	vBIT(val, 56, 4)
 #define MDIO_OP(val)			vBIT(val, 60, 2)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 1a4979f27fb..458daa06ed4 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -63,6 +63,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/mdio.h>
 #include <linux/skbuff.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -1763,7 +1764,7 @@ static int init_nic(struct s2io_nic *nic)
 		 * by then we return error.
 		 */
 		time = 0;
-		while (TRUE) {
+		while (true) {
 			val64 = readq(&bar0->rti_command_mem);
 			if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
 				break;
@@ -2136,7 +2137,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
 
 	herc = (sp->device_type == XFRAME_II_DEVICE);
 
-	if (flag == FALSE) {
+	if (flag == false) {
 		if ((!herc && (sp->pdev->revision >= 4)) || herc) {
 			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
 				ret = 1;
@@ -3328,9 +3329,9 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
 	struct stat_block *stat_info = sp->mac_control.stats_info;
 
 	/* Check the communication with the MDIO slave */
-	addr = 0x0000;
+	addr = MDIO_CTRL1;
 	val64 = 0x0;
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 	if((val64 == 0xFFFF) || (val64 == 0x0000))
 	{
 		DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
@@ -3338,24 +3339,24 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
 		return;
 	}
 
-	/* Check for the expecte value of 2040 at PMA address 0x0000 */
-	if(val64 != 0x2040)
+	/* Check for the expected value of control reg 1 */
+	if(val64 != MDIO_CTRL1_SPEED10G)
 	{
 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
-		DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
-			  (unsigned long long)val64);
+		DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n",
+			  (unsigned long long)val64, MDIO_CTRL1_SPEED10G);
 		return;
 	}
 
 	/* Loading the DOM register to MDIO register */
 	addr = 0xA100;
-	s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
 	/* Reading the Alarm flags */
 	addr = 0xA070;
 	val64 = 0x0;
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
 	flag = CHECKBIT(val64, 0x7);
 	type = 1;
@@ -3387,7 +3388,7 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
 	/* Reading the Warning flags */
 	addr = 0xA074;
 	val64 = 0x0;
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
 	if(CHECKBIT(val64, 0x7))
 		stat_info->xpak_stat.warn_transceiver_temp_high++;
@@ -3586,7 +3587,7 @@ static void s2io_reset(struct s2io_nic * sp)
 		writeq(val64, &bar0->pcc_err_reg);
 	}
 
-	sp->device_enabled_once = FALSE;
+	sp->device_enabled_once = false;
 }
 
 /**
@@ -4298,7 +4299,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 		s2io_stop_tx_queue(sp, fifo->fifo_no);
 	}
 	mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
-	dev->trans_start = jiffies;
 	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 
 	if (sp->config.intr_type == MSI_X)
@@ -5572,10 +5572,10 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
 
 	val64 = readq(&bar0->rmac_pause_cfg);
 	if (val64 & RMAC_PAUSE_GEN_ENABLE)
-		ep->tx_pause = TRUE;
+		ep->tx_pause = true;
 	if (val64 & RMAC_PAUSE_RX_ENABLE)
-		ep->rx_pause = TRUE;
-	ep->autoneg = FALSE;
+		ep->rx_pause = true;
+	ep->autoneg = false;
 }
 
 /**
@@ -6806,7 +6806,7 @@ static void s2io_set_link(struct work_struct *work)
 					val64 |= ADAPTER_LED_ON;
 					writeq(val64, &bar0->adapter_control);
 				}
-				nic->device_enabled_once = TRUE;
+				nic->device_enabled_once = true;
 			} else {
 				DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
 				DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
@@ -7754,7 +7754,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	struct s2io_nic *sp;
 	struct net_device *dev;
 	int i, j, ret;
-	int dma_flag = FALSE;
+	int dma_flag = false;
 	u32 mac_up, mac_down;
 	u64 val64 = 0, tmp64 = 0;
 	struct XENA_dev_config __iomem *bar0 = NULL;
@@ -7777,7 +7777,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 
 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
-		dma_flag = TRUE;
+		dma_flag = true;
 		if (pci_set_consistent_dma_mask
 		    (pdev, DMA_BIT_MASK(64))) {
 			DBG_PRINT(ERR_DBG,
@@ -7818,7 +7818,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	sp->dev = dev;
 	sp->pdev = pdev;
 	sp->high_dma_flag = dma_flag;
-	sp->device_enabled_once = FALSE;
+	sp->device_enabled_once = false;
 	if (rx_ring_mode == 1)
 		sp->rxd_mode = RXD_MODE_1;
 	if (rx_ring_mode == 2)
@@ -7964,7 +7964,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 
 	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-	if (sp->high_dma_flag == TRUE)
+	if (sp->high_dma_flag == true)
 		dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_TSO;
 	dev->features |= NETIF_F_TSO6;
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 55cb943f23f..d5c5be6c07b 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -18,15 +18,6 @@
 #define vBIT(val, loc, sz)	(((u64)val) << (64-loc-sz))
 #define INV(d)  ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff)
 
-#ifndef BOOL
-#define BOOL    int
-#endif
-
-#ifndef TRUE
-#define TRUE    1
-#define FALSE   0
-#endif
-
 #undef SUCCESS
 #define SUCCESS 0
 #define FAILURE -1
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index ce7551e17ba..d8c9cf1b901 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2084,7 +2084,7 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&sc->sbm_lock, flags);
 
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	dev->trans_start = jiffies;
@@ -2271,6 +2271,21 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
 	return 0;
 }
 
+static const struct net_device_ops sbmac_netdev_ops = {
+	.ndo_open		= sbmac_open,
+	.ndo_stop		= sbmac_close,
+	.ndo_start_xmit		= sbmac_start_tx,
+	.ndo_set_multicast_list	= sbmac_set_rx_mode,
+	.ndo_tx_timeout		= sbmac_tx_timeout,
+	.ndo_do_ioctl		= sbmac_mii_ioctl,
+	.ndo_change_mtu		= sb1250_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= sbmac_netpoll,
+#endif
+};
+
 /**********************************************************************
  *  SBMAC_INIT(dev)
  *
@@ -2285,7 +2300,7 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
 
 static int sbmac_init(struct platform_device *pldev, long long base)
 {
-	struct net_device *dev = pldev->dev.driver_data;
+	struct net_device *dev = dev_get_drvdata(&pldev->dev);
 	int idx = pldev->id;
 	struct sbmac_softc *sc = netdev_priv(dev);
 	unsigned char *eaddr;
@@ -2327,21 +2342,11 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 
 	spin_lock_init(&(sc->sbm_lock));
 
-	dev->open               = sbmac_open;
-	dev->hard_start_xmit    = sbmac_start_tx;
-	dev->stop               = sbmac_close;
-	dev->set_multicast_list = sbmac_set_rx_mode;
-	dev->do_ioctl           = sbmac_mii_ioctl;
-	dev->tx_timeout         = sbmac_tx_timeout;
-	dev->watchdog_timeo     = TX_TIMEOUT;
+	dev->netdev_ops = &sbmac_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
 
 	netif_napi_add(dev, &sc->napi, sbmac_poll, 16);
 
-	dev->change_mtu         = sb1250_change_mtu;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = sbmac_netpoll;
-#endif
-
 	dev->irq		= UNIT_INT(idx);
 
 	/* This is needed for PASS2 for Rx H/W checksum feature */
@@ -2726,7 +2731,7 @@ static int __init sbmac_probe(struct platform_device *pldev)
 		goto out_unmap;
 	}
 
-	pldev->dev.driver_data = dev;
+	dev_set_drvdata(&pldev->dev, dev);
 	SET_NETDEV_DEV(dev, &pldev->dev);
 
 	sc = netdev_priv(dev);
@@ -2751,7 +2756,7 @@ out_out:
 
 static int __exit sbmac_remove(struct platform_device *pldev)
 {
-	struct net_device *dev = pldev->dev.driver_data;
+	struct net_device *dev = dev_get_drvdata(&pldev->dev);
 	struct sbmac_softc *sc = netdev_priv(dev);
 
 	unregister_netdev(dev);
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig
index 12a82966b57..260aafaac23 100644
--- a/drivers/net/sfc/Kconfig
+++ b/drivers/net/sfc/Kconfig
@@ -1,7 +1,7 @@
 config SFC
 	tristate "Solarflare Solarstorm SFC4000 support"
 	depends on PCI && INET
-	select MII
+	select MDIO
 	select CRC32
 	select I2C
 	select I2C_ALGOBIT
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index 5182ac5a103..4a4c74c891b 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -172,7 +172,6 @@ static const u8 sfe4002_lm87_regs[] = {
 static struct i2c_board_info sfe4002_hwmon_info = {
 	I2C_BOARD_INFO("lm87", 0x2e),
 	.platform_data	= &sfe4002_lm87_channel,
-	.irq		= -1,
 };
 
 /****************************************************************************/
@@ -247,7 +246,6 @@ static const u8 sfn4112f_lm87_regs[] = {
 static struct i2c_board_info sfn4112f_hwmon_info = {
 	I2C_BOARD_INFO("lm87", 0x2e),
 	.platform_data	= &sfn4112f_lm87_channel,
-	.irq		= -1,
 };
 
 #define SFN4112F_ACT_LED	0
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7269a426051..343e8da1fa3 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -50,16 +50,6 @@ static struct workqueue_struct *reset_workqueue;
  *************************************************************************/
 
 /*
- * Enable large receive offload (LRO) aka soft segment reassembly (SSR)
- *
- * This sets the default for new devices.  It can be controlled later
- * using ethtool.
- */
-static int lro = true;
-module_param(lro, int, 0644);
-MODULE_PARM_DESC(lro, "Large receive offload acceleration");
-
-/*
  * Use separate channels for TX and RX events
  *
  * Set this to 1 to use separate channels for TX and RX. It allows us
@@ -894,9 +884,9 @@ static int efx_wanted_rx_queues(void)
 	int count;
 	int cpu;
 
-	if (!alloc_cpumask_var(&core_mask, GFP_KERNEL)) {
+	if (unlikely(!alloc_cpumask_var(&core_mask, GFP_KERNEL))) {
 		printk(KERN_WARNING
-		       "efx.c: allocation failure, irq balancing hobbled\n");
+		       "sfc: RSS disabled due to allocation failure\n");
 		return 1;
 	}
 
@@ -1300,10 +1290,16 @@ out_requeue:
 static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	struct mii_ioctl_data *data = if_mii(ifr);
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
-	return generic_mii_ioctl(&efx->mii, if_mii(ifr), cmd, NULL);
+	/* Convert phy_id from older PRTAD/DEVAD format */
+	if ((cmd == SIOCGMIIREG || cmd == SIOCSMIIREG) &&
+	    (data->phy_id & 0xfc00) == 0x0400)
+		data->phy_id ^= MDIO_PHY_ID_C45 | 0x0400;
+
+	return mdio_mii_ioctl(&efx->mdio, data, cmd);
 }
 
 /**************************************************************************
@@ -1945,7 +1941,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	mutex_init(&efx->mac_lock);
 	efx->mac_op = &efx_dummy_mac_operations;
 	efx->phy_op = &efx_dummy_phy_operations;
-	efx->mii.dev = net_dev;
+	efx->mdio.dev = net_dev;
 	INIT_WORK(&efx->phy_work, efx_phy_work);
 	INIT_WORK(&efx->mac_work, efx_mac_work);
 	atomic_set(&efx->netif_stop_count, 1);
@@ -2161,9 +2157,8 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
 	if (!net_dev)
 		return -ENOMEM;
 	net_dev->features |= (NETIF_F_IP_CSUM | NETIF_F_SG |
-			      NETIF_F_HIGHDMA | NETIF_F_TSO);
-	if (lro)
-		net_dev->features |= NETIF_F_GRO;
+			      NETIF_F_HIGHDMA | NETIF_F_TSO |
+			      NETIF_F_GRO);
 	/* Mask for features that also apply to VLAN devices */
 	net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
 				   NETIF_F_HIGHDMA | NETIF_F_TSO);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 64309f4e8b1..997ea2a3d53 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -10,6 +10,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
+#include <linux/mdio.h>
 #include <linux/rtnetlink.h>
 #include "net_driver.h"
 #include "workarounds.h"
@@ -345,8 +346,8 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
 	unsigned int n = 0, i;
 	enum efx_loopback_mode mode;
 
-	efx_fill_test(n++, strings, data, &tests->mii,
-		      "core", 0, "mii", NULL);
+	efx_fill_test(n++, strings, data, &tests->mdio,
+		      "core", 0, "mdio", NULL);
 	efx_fill_test(n++, strings, data, &tests->nvram,
 		      "core", 0, "nvram", NULL);
 	efx_fill_test(n++, strings, data, &tests->interrupt,
@@ -529,14 +530,7 @@ static int efx_ethtool_nway_reset(struct net_device *net_dev)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 
-	if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
-		mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
-				       MDIO_MMDREG_CTRL1,
-				       __ffs(BMCR_ANRESTART), true);
-		return 0;
-	}
-
-	return -EOPNOTSUPP;
+	return mdio45_nway_restart(&efx->mdio);
 }
 
 static u32 efx_ethtool_get_link(struct net_device *net_dev)
@@ -689,7 +683,7 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
 		return -EINVAL;
 	}
 
-	if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) &&
+	if (!(efx->phy_op->mmds & MDIO_DEVS_AN) &&
 	    (wanted_fc & EFX_FC_AUTO)) {
 		EFX_LOG(efx, "PHY does not support flow control "
 			"autonegotiation\n");
@@ -717,7 +711,8 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
 	mutex_lock(&efx->mac_lock);
 
 	efx->wanted_fc = wanted_fc;
-	mdio_clause45_set_pause(efx);
+	if (efx->phy_op->mmds & MDIO_DEVS_AN)
+		mdio45_ethtool_spauseparam_an(&efx->mdio, pause);
 	__efx_reconfigure_port(efx);
 
 	mutex_unlock(&efx->mac_lock);
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 466a8abb005..c049364aec4 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -2063,26 +2063,6 @@ int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset)
  **************************************************************************
  */
 
-/* Use the top bit of the MII PHY id to indicate the PHY type
- * (1G/10G), with the remaining bits as the actual PHY id.
- *
- * This allows us to avoid leaking information from the mii_if_info
- * structure into other data structures.
- */
-#define FALCON_PHY_ID_ID_WIDTH  EFX_WIDTH(MD_PRT_DEV_ADR)
-#define FALCON_PHY_ID_ID_MASK   ((1 << FALCON_PHY_ID_ID_WIDTH) - 1)
-#define FALCON_PHY_ID_WIDTH     (FALCON_PHY_ID_ID_WIDTH + 1)
-#define FALCON_PHY_ID_MASK      ((1 << FALCON_PHY_ID_WIDTH) - 1)
-#define FALCON_PHY_ID_10G       (1 << (FALCON_PHY_ID_WIDTH - 1))
-
-
-/* Packing the clause 45 port and device fields into a single value */
-#define MD_PRT_ADR_COMP_LBN   (MD_PRT_ADR_LBN - MD_DEV_ADR_LBN)
-#define MD_PRT_ADR_COMP_WIDTH  MD_PRT_ADR_WIDTH
-#define MD_DEV_ADR_COMP_LBN    0
-#define MD_DEV_ADR_COMP_WIDTH  MD_DEV_ADR_WIDTH
-
-
 /* Wait for GMII access to complete */
 static int falcon_gmii_wait(struct efx_nic *efx)
 {
@@ -2108,49 +2088,29 @@ static int falcon_gmii_wait(struct efx_nic *efx)
 	return -ETIMEDOUT;
 }
 
-/* Writes a GMII register of a PHY connected to Falcon using MDIO. */
-static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
-			      int addr, int value)
+/* Write an MDIO register of a PHY connected to Falcon. */
+static int falcon_mdio_write(struct net_device *net_dev,
+			     int prtad, int devad, u16 addr, u16 value)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
 	efx_oword_t reg;
+	int rc;
 
-	/* The 'generic' prt/dev packing in mdio_10g.h is conveniently
-	 * chosen so that the only current user, Falcon, can take the
-	 * packed value and use them directly.
-	 * Fail to build if this assumption is broken.
-	 */
-	BUILD_BUG_ON(FALCON_PHY_ID_10G != MDIO45_XPRT_ID_IS10G);
-	BUILD_BUG_ON(FALCON_PHY_ID_ID_WIDTH != MDIO45_PRT_DEV_WIDTH);
-	BUILD_BUG_ON(MD_PRT_ADR_COMP_LBN != MDIO45_PRT_ID_COMP_LBN);
-	BUILD_BUG_ON(MD_DEV_ADR_COMP_LBN != MDIO45_DEV_ID_COMP_LBN);
-
-	if (phy_id2 == PHY_ADDR_INVALID)
-		return;
-
-	/* See falcon_mdio_read for an explanation. */
-	if (!(phy_id & FALCON_PHY_ID_10G)) {
-		int mmd = ffs(efx->phy_op->mmds) - 1;
-		EFX_TRACE(efx, "Fixing erroneous clause22 write\n");
-		phy_id2 = mdio_clause45_pack(phy_id2, mmd)
-			& FALCON_PHY_ID_ID_MASK;
-	}
-
-	EFX_REGDUMP(efx, "writing GMII %d register %02x with %04x\n", phy_id,
-		    addr, value);
+	EFX_REGDUMP(efx, "writing MDIO %d register %d.%d with 0x%04x\n",
+		    prtad, devad, addr, value);
 
 	spin_lock_bh(&efx->phy_lock);
 
-	/* Check MII not currently being accessed */
-	if (falcon_gmii_wait(efx) != 0)
+	/* Check MDIO not currently being accessed */
+	rc = falcon_gmii_wait(efx);
+	if (rc)
 		goto out;
 
 	/* Write the address/ID register */
 	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
 	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
 
-	EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_id2);
+	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
 	falcon_write(efx, &reg, MD_ID_REG_KER);
 
 	/* Write data */
@@ -2163,7 +2123,8 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
 	falcon_write(efx, &reg, MD_CS_REG_KER);
 
 	/* Wait for data to be written */
-	if (falcon_gmii_wait(efx) != 0) {
+	rc = falcon_gmii_wait(efx);
+	if (rc) {
 		/* Abort the write operation */
 		EFX_POPULATE_OWORD_2(reg,
 				     MD_WRC, 0,
@@ -2174,45 +2135,28 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
 
  out:
 	spin_unlock_bh(&efx->phy_lock);
+	return rc;
 }
 
-/* Reads a GMII register from a PHY connected to Falcon.  If no value
- * could be read, -1 will be returned. */
-static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
+/* Read an MDIO register of a PHY connected to Falcon. */
+static int falcon_mdio_read(struct net_device *net_dev,
+			    int prtad, int devad, u16 addr)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
 	efx_oword_t reg;
-	int value = -1;
-
-	if (phy_addr == PHY_ADDR_INVALID)
-		return -1;
-
-	/* Our PHY code knows whether it needs to talk clause 22(1G) or 45(10G)
-	 * but the generic Linux code does not make any distinction or have
-	 * any state for this.
-	 * We spot the case where someone tried to talk 22 to a 45 PHY and
-	 * redirect the request to the lowest numbered MMD as a clause45
-	 * request. This is enough to allow simple queries like id and link
-	 * state to succeed. TODO: We may need to do more in future.
-	 */
-	if (!(phy_id & FALCON_PHY_ID_10G)) {
-		int mmd = ffs(efx->phy_op->mmds) - 1;
-		EFX_TRACE(efx, "Fixing erroneous clause22 read\n");
-		phy_addr = mdio_clause45_pack(phy_addr, mmd)
-			& FALCON_PHY_ID_ID_MASK;
-	}
+	int rc;
 
 	spin_lock_bh(&efx->phy_lock);
 
-	/* Check MII not currently being accessed */
-	if (falcon_gmii_wait(efx) != 0)
+	/* Check MDIO not currently being accessed */
+	rc = falcon_gmii_wait(efx);
+	if (rc)
 		goto out;
 
 	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
 	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
 
-	EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_addr);
+	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
 	falcon_write(efx, &reg, MD_ID_REG_KER);
 
 	/* Request data to be read */
@@ -2220,12 +2164,12 @@ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
 	falcon_write(efx, &reg, MD_CS_REG_KER);
 
 	/* Wait for data to become available */
-	value = falcon_gmii_wait(efx);
-	if (value == 0) {
+	rc = falcon_gmii_wait(efx);
+	if (rc == 0) {
 		falcon_read(efx, &reg, MD_RXD_REG_KER);
-		value = EFX_OWORD_FIELD(reg, MD_RXD);
-		EFX_REGDUMP(efx, "read from GMII %d register %02x, got %04x\n",
-			    phy_id, addr, value);
+		rc = EFX_OWORD_FIELD(reg, MD_RXD);
+		EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n",
+			    prtad, devad, addr, rc);
 	} else {
 		/* Abort the read operation */
 		EFX_POPULATE_OWORD_2(reg,
@@ -2233,22 +2177,13 @@ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
 				     MD_GC, 1);
 		falcon_write(efx, &reg, MD_CS_REG_KER);
 
-		EFX_LOG(efx, "read from GMII 0x%x register %02x, got "
-			"error %d\n", phy_id, addr, value);
+		EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n",
+			prtad, devad, addr, rc);
 	}
 
  out:
 	spin_unlock_bh(&efx->phy_lock);
-
-	return value;
-}
-
-static void falcon_init_mdio(struct mii_if_info *gmii)
-{
-	gmii->mdio_read = falcon_mdio_read;
-	gmii->mdio_write = falcon_mdio_write;
-	gmii->phy_id_mask = FALCON_PHY_ID_MASK;
-	gmii->reg_num_mask = ((1 << EFX_WIDTH(MD_PHY_ADR)) - 1);
+	return rc;
 }
 
 static int falcon_probe_phy(struct efx_nic *efx)
@@ -2342,9 +2277,11 @@ int falcon_probe_port(struct efx_nic *efx)
 	if (rc)
 		return rc;
 
-	/* Set up GMII structure for PHY */
-	efx->mii.supports_gmii = true;
-	falcon_init_mdio(&efx->mii);
+	/* Set up MDIO structure for PHY */
+	efx->mdio.mmds = efx->phy_op->mmds;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->mdio.mdio_read = falcon_mdio_read;
+	efx->mdio.mdio_write = falcon_mdio_write;
 
 	/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
 	if (falcon_rev(efx) >= FALCON_REV_B0)
@@ -2761,7 +2698,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 	if (rc == -EINVAL) {
 		EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n");
 		efx->phy_type = PHY_TYPE_NONE;
-		efx->mii.phy_id = PHY_ADDR_INVALID;
+		efx->mdio.prtad = MDIO_PRTAD_NONE;
 		board_rev = 0;
 		rc = 0;
 	} else if (rc) {
@@ -2771,7 +2708,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 		struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3;
 
 		efx->phy_type = v2->port0_phy_type;
-		efx->mii.phy_id = v2->port0_phy_addr;
+		efx->mdio.prtad = v2->port0_phy_addr;
 		board_rev = le16_to_cpu(v2->board_revision);
 
 		if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
@@ -2793,7 +2730,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 	/* Read the MAC addresses */
 	memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN);
 
-	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mii.phy_id);
+	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad);
 
 	efx_set_board_info(efx, board_rev);
 
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
index bda8d5bb72e..375e2a5961e 100644
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -456,9 +456,6 @@
 #define MD_PRT_ADR_WIDTH 5
 #define MD_DEV_ADR_LBN 6
 #define MD_DEV_ADR_WIDTH 5
-/* Used for writing both at once */
-#define MD_PRT_DEV_ADR_LBN 6
-#define MD_PRT_DEV_ADR_WIDTH 10
 
 /* PHY management status & mask register (DWORD read only) */
 #define MD_STAT_REG_KER 0xc50
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 5a03713685a..2b3269c0326 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -133,7 +133,7 @@ bool falcon_xaui_link_ok(struct efx_nic *efx)
 	/* If the link is up, then check the phy side of the xaui link */
 	if (efx->link_up && link_ok)
 		if (efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS))
-			link_ok = mdio_clause45_phyxgxs_lane_sync(efx);
+			link_ok = efx_mdio_phyxgxs_lane_sync(efx);
 
 	return link_ok;
 }
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 9f5ec3eb341..6c33459f9ea 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -17,7 +17,7 @@
 #include "boards.h"
 #include "workarounds.h"
 
-unsigned mdio_id_oui(u32 id)
+unsigned efx_mdio_id_oui(u32 id)
 {
 	unsigned oui = 0;
 	int i;
@@ -32,52 +32,45 @@ unsigned mdio_id_oui(u32 id)
 	return oui;
 }
 
-int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
+int efx_mdio_reset_mmd(struct efx_nic *port, int mmd,
 			    int spins, int spintime)
 {
 	u32 ctrl;
-	int phy_id = port->mii.phy_id;
 
 	/* Catch callers passing values in the wrong units (or just silly) */
 	EFX_BUG_ON_PARANOID(spins * spintime >= 5000);
 
-	mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1,
-			    (1 << MDIO_MMDREG_CTRL1_RESET_LBN));
+	efx_mdio_write(port, mmd, MDIO_CTRL1, MDIO_CTRL1_RESET);
 	/* Wait for the reset bit to clear. */
 	do {
 		msleep(spintime);
-		ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1);
+		ctrl = efx_mdio_read(port, mmd, MDIO_CTRL1);
 		spins--;
 
-	} while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)));
+	} while (spins && (ctrl & MDIO_CTRL1_RESET));
 
 	return spins ? spins : -ETIMEDOUT;
 }
 
-static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
-				   int fault_fatal)
+static int efx_mdio_check_mmd(struct efx_nic *efx, int mmd, int fault_fatal)
 {
 	int status;
-	int phy_id = efx->mii.phy_id;
 
 	if (LOOPBACK_INTERNAL(efx))
 		return 0;
 
 	if (mmd != MDIO_MMD_AN) {
 		/* Read MMD STATUS2 to check it is responding. */
-		status = mdio_clause45_read(efx, phy_id, mmd,
-					    MDIO_MMDREG_STAT2);
-		if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
-		     ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) !=
-		    MDIO_MMDREG_STAT2_PRESENT_VAL) {
+		status = efx_mdio_read(efx, mmd, MDIO_STAT2);
+		if ((status & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) {
 			EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd);
 			return -EIO;
 		}
 	}
 
 	/* Read MMD STATUS 1 to check for fault. */
-	status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1);
-	if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) {
+	status = efx_mdio_read(efx, mmd, MDIO_STAT1);
+	if (status & MDIO_STAT1_FAULT) {
 		if (fault_fatal) {
 			EFX_ERR(efx, "PHY MMD %d reporting fatal"
 				" fault: status %x\n", mmd, status);
@@ -94,8 +87,7 @@ static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
 #define MDIO45_RESET_TIME	1000 /* ms */
 #define MDIO45_RESET_ITERS	100
 
-int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
-				  unsigned int mmd_mask)
+int efx_mdio_wait_reset_mmds(struct efx_nic *efx, unsigned int mmd_mask)
 {
 	const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS;
 	int tries = MDIO45_RESET_ITERS;
@@ -109,16 +101,13 @@ int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
 		in_reset = 0;
 		while (mask) {
 			if (mask & 1) {
-				stat = mdio_clause45_read(efx,
-							  efx->mii.phy_id,
-							  mmd,
-							  MDIO_MMDREG_CTRL1);
+				stat = efx_mdio_read(efx, mmd, MDIO_CTRL1);
 				if (stat < 0) {
 					EFX_ERR(efx, "failed to read status of"
 						" MMD %d\n", mmd);
 					return -EIO;
 				}
-				if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))
+				if (stat & MDIO_CTRL1_RESET)
 					in_reset |= (1 << mmd);
 			}
 			mask = mask >> 1;
@@ -137,28 +126,26 @@ int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
 	return rc;
 }
 
-int mdio_clause45_check_mmds(struct efx_nic *efx,
-			     unsigned int mmd_mask, unsigned int fatal_mask)
+int efx_mdio_check_mmds(struct efx_nic *efx,
+			unsigned int mmd_mask, unsigned int fatal_mask)
 {
-	int mmd = 0, probe_mmd, devs0, devs1;
+	int mmd = 0, probe_mmd, devs1, devs2;
 	u32 devices;
 
 	/* Historically we have probed the PHYXS to find out what devices are
 	 * present,but that doesn't work so well if the PHYXS isn't expected
 	 * to exist, if so just find the first item in the list supplied. */
-	probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
+	probe_mmd = (mmd_mask & MDIO_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
 	    __ffs(mmd_mask);
 
 	/* Check all the expected MMDs are present */
-	devs0 = mdio_clause45_read(efx, efx->mii.phy_id,
-				   probe_mmd, MDIO_MMDREG_DEVS0);
-	devs1 = mdio_clause45_read(efx, efx->mii.phy_id,
-				   probe_mmd, MDIO_MMDREG_DEVS1);
-	if (devs0 < 0 || devs1 < 0) {
+	devs1 = efx_mdio_read(efx, probe_mmd, MDIO_DEVS1);
+	devs2 = efx_mdio_read(efx, probe_mmd, MDIO_DEVS2);
+	if (devs1 < 0 || devs2 < 0) {
 		EFX_ERR(efx, "failed to read devices present\n");
 		return -EIO;
 	}
-	devices = devs0 | (devs1 << 16);
+	devices = devs1 | (devs2 << 16);
 	if ((devices & mmd_mask) != mmd_mask) {
 		EFX_ERR(efx, "required MMDs not present: got %x, "
 			"wanted %x\n", devices, mmd_mask);
@@ -170,7 +157,7 @@ int mdio_clause45_check_mmds(struct efx_nic *efx,
 	while (mmd_mask) {
 		if (mmd_mask & 1) {
 			int fault_fatal = fatal_mask & 1;
-			if (mdio_clause45_check_mmd(efx, mmd, fault_fatal))
+			if (efx_mdio_check_mmd(efx, mmd, fault_fatal))
 				return -EIO;
 		}
 		mmd_mask = mmd_mask >> 1;
@@ -181,13 +168,8 @@ int mdio_clause45_check_mmds(struct efx_nic *efx,
 	return 0;
 }
 
-bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
+bool efx_mdio_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 {
-	int phy_id = efx->mii.phy_id;
-	u32 reg;
-	bool ok = true;
-	int mmd = 0;
-
 	/* If the port is in loopback, then we should only consider a subset
 	 * of mmd's */
 	if (LOOPBACK_INTERNAL(efx))
@@ -197,241 +179,75 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 	else if (efx_phy_mode_disabled(efx->phy_mode))
 		return false;
 	else if (efx->loopback_mode == LOOPBACK_PHYXS)
-		mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
-			      MDIO_MMDREG_DEVS_PCS |
-			      MDIO_MMDREG_DEVS_PMAPMD |
-			      MDIO_MMDREG_DEVS_AN);
+		mmd_mask &= ~(MDIO_DEVS_PHYXS |
+			      MDIO_DEVS_PCS |
+			      MDIO_DEVS_PMAPMD |
+			      MDIO_DEVS_AN);
 	else if (efx->loopback_mode == LOOPBACK_PCS)
-		mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
-			      MDIO_MMDREG_DEVS_PMAPMD |
-			      MDIO_MMDREG_DEVS_AN);
+		mmd_mask &= ~(MDIO_DEVS_PCS |
+			      MDIO_DEVS_PMAPMD |
+			      MDIO_DEVS_AN);
 	else if (efx->loopback_mode == LOOPBACK_PMAPMD)
-		mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
-			      MDIO_MMDREG_DEVS_AN);
-
-	if (!mmd_mask) {
-		/* Use presence of XGMII faults in leui of link state */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
-					 MDIO_PHYXS_STATUS2);
-		return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
-	}
+		mmd_mask &= ~(MDIO_DEVS_PMAPMD |
+			      MDIO_DEVS_AN);
 
-	while (mmd_mask) {
-		if (mmd_mask & 1) {
-			/* Double reads because link state is latched, and a
-			 * read moves the current state into the register */
-			reg = mdio_clause45_read(efx, phy_id,
-						 mmd, MDIO_MMDREG_STAT1);
-			reg = mdio_clause45_read(efx, phy_id,
-						 mmd, MDIO_MMDREG_STAT1);
-			ok = ok && (reg & (1 << MDIO_MMDREG_STAT1_LINK_LBN));
-		}
-		mmd_mask = (mmd_mask >> 1);
-		mmd++;
-	}
-	return ok;
+	return mdio45_links_ok(&efx->mdio, mmd_mask);
 }
 
-void mdio_clause45_transmit_disable(struct efx_nic *efx)
+void efx_mdio_transmit_disable(struct efx_nic *efx)
 {
-	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			       MDIO_MMDREG_TXDIS, MDIO_MMDREG_TXDIS_GLOBAL_LBN,
-			       efx->phy_mode & PHY_MODE_TX_DISABLED);
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD,
+			  MDIO_PMA_TXDIS, MDIO_PMD_TXDIS_GLOBAL,
+			  efx->phy_mode & PHY_MODE_TX_DISABLED);
 }
 
-void mdio_clause45_phy_reconfigure(struct efx_nic *efx)
+void efx_mdio_phy_reconfigure(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
-
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
-			       MDIO_MMDREG_CTRL1, MDIO_PMAPMD_CTRL1_LBACK_LBN,
-			       efx->loopback_mode == LOOPBACK_PMAPMD);
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PCS,
-			       MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
-			       efx->loopback_mode == LOOPBACK_PCS);
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
-			       MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
-			       efx->loopback_mode == LOOPBACK_NETWORK);
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD,
+			  MDIO_CTRL1, MDIO_PMA_CTRL1_LOOPBACK,
+			  efx->loopback_mode == LOOPBACK_PMAPMD);
+	efx_mdio_set_flag(efx, MDIO_MMD_PCS,
+			  MDIO_CTRL1, MDIO_PCS_CTRL1_LOOPBACK,
+			  efx->loopback_mode == LOOPBACK_PCS);
+	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS,
+			  MDIO_CTRL1, MDIO_PHYXS_CTRL1_LOOPBACK,
+			  efx->loopback_mode == LOOPBACK_NETWORK);
 }
 
-static void mdio_clause45_set_mmd_lpower(struct efx_nic *efx,
-					 int lpower, int mmd)
+static void efx_mdio_set_mmd_lpower(struct efx_nic *efx,
+				    int lpower, int mmd)
 {
-	int phy = efx->mii.phy_id;
-	int stat = mdio_clause45_read(efx, phy, mmd, MDIO_MMDREG_STAT1);
+	int stat = efx_mdio_read(efx, mmd, MDIO_STAT1);
 
 	EFX_TRACE(efx, "Setting low power mode for MMD %d to %d\n",
 		  mmd, lpower);
 
-	if (stat & (1 << MDIO_MMDREG_STAT1_LPABLE_LBN)) {
-		mdio_clause45_set_flag(efx, phy, mmd, MDIO_MMDREG_CTRL1,
-				       MDIO_MMDREG_CTRL1_LPOWER_LBN, lpower);
+	if (stat & MDIO_STAT1_LPOWERABLE) {
+		efx_mdio_set_flag(efx, mmd, MDIO_CTRL1,
+				  MDIO_CTRL1_LPOWER, lpower);
 	}
 }
 
-void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
-				   int low_power, unsigned int mmd_mask)
+void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
+			      int low_power, unsigned int mmd_mask)
 {
 	int mmd = 0;
-	mmd_mask &= ~MDIO_MMDREG_DEVS_AN;
+	mmd_mask &= ~MDIO_DEVS_AN;
 	while (mmd_mask) {
 		if (mmd_mask & 1)
-			mdio_clause45_set_mmd_lpower(efx, low_power, mmd);
+			efx_mdio_set_mmd_lpower(efx, low_power, mmd);
 		mmd_mask = (mmd_mask >> 1);
 		mmd++;
 	}
 }
 
-static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
-{
-	int phy_id = efx->mii.phy_id;
-	u32 result = 0;
-	int reg;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, addr);
-	if (reg & ADVERTISE_10HALF)
-		result |= ADVERTISED_10baseT_Half;
-	if (reg & ADVERTISE_10FULL)
-		result |= ADVERTISED_10baseT_Full;
-	if (reg & ADVERTISE_100HALF)
-		result |= ADVERTISED_100baseT_Half;
-	if (reg & ADVERTISE_100FULL)
-		result |= ADVERTISED_100baseT_Full;
-	return result;
-}
-
-/**
- * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
- * @efx:		Efx NIC
- * @ecmd: 		Buffer for settings
- *
- * On return the 'port', 'speed', 'supported' and 'advertising' fields of
- * ecmd have been filled out.
- */
-void mdio_clause45_get_settings(struct efx_nic *efx,
-				struct ethtool_cmd *ecmd)
-{
-	mdio_clause45_get_settings_ext(efx, ecmd, 0, 0);
-}
-
-/**
- * mdio_clause45_get_settings_ext - Read (some of) the PHY settings over MDIO.
- * @efx:		Efx NIC
- * @ecmd: 		Buffer for settings
- * @xnp:		Advertised Extended Next Page state
- * @xnp_lpa:		Link Partner's advertised XNP state
- *
- * On return the 'port', 'speed', 'supported' and 'advertising' fields of
- * ecmd have been filled out.
- */
-void mdio_clause45_get_settings_ext(struct efx_nic *efx,
-				    struct ethtool_cmd *ecmd,
-				    u32 npage_adv, u32 npage_lpa)
-{
-	int phy_id = efx->mii.phy_id;
-	int reg;
-
-	ecmd->transceiver = XCVR_INTERNAL;
-	ecmd->phy_address = phy_id;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_MMDREG_CTRL2);
-	switch (reg & MDIO_PMAPMD_CTRL2_TYPE_MASK) {
-	case MDIO_PMAPMD_CTRL2_10G_BT:
-	case MDIO_PMAPMD_CTRL2_1G_BT:
-	case MDIO_PMAPMD_CTRL2_100_BT:
-	case MDIO_PMAPMD_CTRL2_10_BT:
-		ecmd->port = PORT_TP;
-		ecmd->supported = SUPPORTED_TP;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 MDIO_MMDREG_SPEED);
-		if (reg & (1 << MDIO_MMDREG_SPEED_10G_LBN))
-			ecmd->supported |= SUPPORTED_10000baseT_Full;
-		if (reg & (1 << MDIO_MMDREG_SPEED_1000M_LBN))
-			ecmd->supported |= (SUPPORTED_1000baseT_Full |
-					    SUPPORTED_1000baseT_Half);
-		if (reg & (1 << MDIO_MMDREG_SPEED_100M_LBN))
-			ecmd->supported |= (SUPPORTED_100baseT_Full |
-					    SUPPORTED_100baseT_Half);
-		if (reg & (1 << MDIO_MMDREG_SPEED_10M_LBN))
-			ecmd->supported |= (SUPPORTED_10baseT_Full |
-					    SUPPORTED_10baseT_Half);
-		ecmd->advertising = ADVERTISED_TP;
-		break;
-
-	/* We represent CX4 as fibre in the absence of anything better */
-	case MDIO_PMAPMD_CTRL2_10G_CX4:
-	/* All the other defined modes are flavours of optical */
-	default:
-		ecmd->port = PORT_FIBRE;
-		ecmd->supported = SUPPORTED_FIBRE;
-		ecmd->advertising = ADVERTISED_FIBRE;
-		break;
-	}
-
-	if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
-		ecmd->supported |= SUPPORTED_Autoneg;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_MMDREG_CTRL1);
-		if (reg & BMCR_ANENABLE) {
-			ecmd->autoneg = AUTONEG_ENABLE;
-			ecmd->advertising |=
-				ADVERTISED_Autoneg |
-				mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
-				npage_adv;
-		} else
-			ecmd->autoneg = AUTONEG_DISABLE;
-	} else
-		ecmd->autoneg = AUTONEG_DISABLE;
-
-	if (ecmd->autoneg) {
-		/* If AN is complete, report best common mode,
-		 * otherwise report best advertised mode. */
-		u32 modes = 0;
-		if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-				       MDIO_MMDREG_STAT1) &
-		    (1 << MDIO_AN_STATUS_AN_DONE_LBN))
-			modes = (ecmd->advertising &
-				 (mdio_clause45_get_an(efx, MDIO_AN_LPA) |
-				  npage_lpa));
-		if (modes == 0)
-			modes = ecmd->advertising;
-
-		if (modes & ADVERTISED_10000baseT_Full) {
-			ecmd->speed = SPEED_10000;
-			ecmd->duplex = DUPLEX_FULL;
-		} else if (modes & (ADVERTISED_1000baseT_Full |
-				    ADVERTISED_1000baseT_Half)) {
-			ecmd->speed = SPEED_1000;
-			ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
-		} else if (modes & (ADVERTISED_100baseT_Full |
-				    ADVERTISED_100baseT_Half)) {
-			ecmd->speed = SPEED_100;
-			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
-		} else {
-			ecmd->speed = SPEED_10;
-			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
-		}
-	} else {
-		/* Report forced settings */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 MDIO_MMDREG_CTRL1);
-		ecmd->speed = (((reg & BMCR_SPEED1000) ? 100 : 1) *
-			       ((reg & BMCR_SPEED100) ? 100 : 10));
-		ecmd->duplex = (reg & BMCR_FULLDPLX ||
-				ecmd->speed == SPEED_10000);
-	}
-}
-
 /**
- * mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO.
+ * efx_mdio_set_settings - Set (some of) the PHY settings over MDIO.
  * @efx:		Efx NIC
  * @ecmd: 		New settings
  */
-int mdio_clause45_set_settings(struct efx_nic *efx,
-			       struct ethtool_cmd *ecmd)
+int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
 	struct ethtool_cmd prev;
 	u32 required;
 	int reg;
@@ -488,95 +304,48 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
 		else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
 					      ADVERTISED_1000baseT_Full))
 			reg |= ADVERTISE_NPAGE;
-		reg |= efx_fc_advertise(efx->wanted_fc);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-				    MDIO_AN_ADVERTISE, reg);
+		reg |= mii_advertise_flowctrl(efx->wanted_fc);
+		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
 
 		/* Set up the (extended) next page if necessary */
 		if (efx->phy_op->set_npage_adv)
 			efx->phy_op->set_npage_adv(efx, ecmd->advertising);
 
 		/* Enable and restart AN */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_MMDREG_CTRL1);
-		reg |= BMCR_ANENABLE;
+		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
+		reg |= MDIO_AN_CTRL1_ENABLE;
 		if (!(EFX_WORKAROUND_15195(efx) &&
 		      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
-			reg |= BMCR_ANRESTART;
+			reg |= MDIO_AN_CTRL1_RESTART;
 		if (xnp)
-			reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
+			reg |= MDIO_AN_CTRL1_XNP;
 		else
-			reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-				    MDIO_MMDREG_CTRL1, reg);
+			reg &= ~MDIO_AN_CTRL1_XNP;
+		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
 	} else {
 		/* Disable AN */
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
-				       MDIO_MMDREG_CTRL1,
-				       __ffs(BMCR_ANENABLE), false);
+		efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_CTRL1,
+				  MDIO_AN_CTRL1_ENABLE, false);
 
 		/* Set the basic control bits */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 MDIO_MMDREG_CTRL1);
-		reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
-			 0x003c);
+		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1);
+		reg &= ~(MDIO_CTRL1_SPEEDSEL | MDIO_CTRL1_FULLDPLX);
 		if (ecmd->speed == SPEED_100)
-			reg |= BMCR_SPEED100;
+			reg |= MDIO_PMA_CTRL1_SPEED100;
 		if (ecmd->duplex)
-			reg |= BMCR_FULLDPLX;
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    MDIO_MMDREG_CTRL1, reg);
+			reg |= MDIO_CTRL1_FULLDPLX;
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, reg);
 	}
 
 	return 0;
 }
 
-void mdio_clause45_set_pause(struct efx_nic *efx)
-{
-	int phy_id = efx->mii.phy_id;
-	int reg;
-
-	if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
-		/* Set pause capability advertising */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_AN_ADVERTISE);
-		reg &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-		reg |= efx_fc_advertise(efx->wanted_fc);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-				    MDIO_AN_ADVERTISE, reg);
-
-		/* Restart auto-negotiation */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_MMDREG_CTRL1);
-		if (reg & BMCR_ANENABLE) {
-			reg |= BMCR_ANRESTART;
-			mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-					    MDIO_MMDREG_CTRL1, reg);
-		}
-	}
-}
-
-enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx)
+enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
 	int lpa;
 
-	if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)))
+	if (!(efx->phy_op->mmds & MDIO_DEVS_AN))
 		return efx->wanted_fc;
-	lpa = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_LPA);
+	lpa = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA);
 	return efx_fc_resolve(efx->wanted_fc, lpa);
 }
-
-void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
-			    u16 addr, int bit, bool sense)
-{
-	int old_val = mdio_clause45_read(efx, prt, dev, addr);
-	int new_val;
-
-	if (sense)
-		new_val = old_val | (1 << bit);
-	else
-		new_val = old_val & ~(1 << bit);
-	if (old_val != new_val)
-		mdio_clause45_write(efx, prt, dev, addr, new_val);
-}
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 7014d2279c2..6b14421a744 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -10,247 +10,53 @@
 #ifndef EFX_MDIO_10G_H
 #define EFX_MDIO_10G_H
 
+#include <linux/mdio.h>
+
 /*
- * Definitions needed for doing 10G MDIO as specified in clause 45
- * MDIO, which do not appear in Linux yet. Also some helper functions.
+ * Helper functions for doing 10G MDIO as specified in IEEE 802.3 clause 45.
  */
 
 #include "efx.h"
 #include "boards.h"
 
-/* Numbering of the MDIO Manageable Devices (MMDs) */
-/* Physical Medium Attachment/ Physical Medium Dependent sublayer */
-#define MDIO_MMD_PMAPMD	(1)
-/* WAN Interface Sublayer */
-#define MDIO_MMD_WIS	(2)
-/* Physical Coding Sublayer */
-#define MDIO_MMD_PCS	(3)
-/* PHY Extender Sublayer */
-#define MDIO_MMD_PHYXS	(4)
-/* Extender Sublayer */
-#define MDIO_MMD_DTEXS	(5)
-/* Transmission convergence */
-#define MDIO_MMD_TC	(6)
-/* Auto negotiation */
-#define MDIO_MMD_AN	(7)
-/* Clause 22 extension */
-#define MDIO_MMD_C22EXT	29
-
-/* Generic register locations */
-#define MDIO_MMDREG_CTRL1	(0)
-#define MDIO_MMDREG_STAT1	(1)
-#define MDIO_MMDREG_IDHI	(2)
-#define MDIO_MMDREG_IDLOW	(3)
-#define MDIO_MMDREG_SPEED	(4)
-#define MDIO_MMDREG_DEVS0	(5)
-#define MDIO_MMDREG_DEVS1	(6)
-#define MDIO_MMDREG_CTRL2	(7)
-#define MDIO_MMDREG_STAT2	(8)
-#define MDIO_MMDREG_TXDIS	(9)
-
-/* Bits in MMDREG_CTRL1 */
-/* Reset */
-#define MDIO_MMDREG_CTRL1_RESET_LBN	(15)
-#define MDIO_MMDREG_CTRL1_RESET_WIDTH	(1)
-/* Loopback */
-/* Loopback bit for WIS, PCS, PHYSX and DTEXS */
-#define MDIO_MMDREG_CTRL1_LBACK_LBN	(14)
-#define MDIO_MMDREG_CTRL1_LBACK_WIDTH	(1)
-/* Low power */
-#define MDIO_MMDREG_CTRL1_LPOWER_LBN	(11)
-#define MDIO_MMDREG_CTRL1_LPOWER_WIDTH	(1)
-
-/* Bits in MMDREG_STAT1 */
-#define MDIO_MMDREG_STAT1_FAULT_LBN	(7)
-#define MDIO_MMDREG_STAT1_FAULT_WIDTH	(1)
-/* Link state */
-#define MDIO_MMDREG_STAT1_LINK_LBN	(2)
-#define MDIO_MMDREG_STAT1_LINK_WIDTH	(1)
-/* Low power ability */
-#define MDIO_MMDREG_STAT1_LPABLE_LBN	(1)
-#define MDIO_MMDREG_STAT1_LPABLE_WIDTH	(1)
-
-/* Bits in combined ID regs */
-static inline unsigned mdio_id_rev(u32 id) { return id & 0xf; }
-static inline unsigned mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
-extern unsigned mdio_id_oui(u32 id);
-
-/* Bits in MMDREG_DEVS0/1. Someone thoughtfully layed things out
- * so the 'bit present' bit number of an MMD is the number of
- * that MMD */
-#define DEV_PRESENT_BIT(_b) (1 << _b)
-
-#define MDIO_MMDREG_DEVS_PHYXS	DEV_PRESENT_BIT(MDIO_MMD_PHYXS)
-#define MDIO_MMDREG_DEVS_PCS	DEV_PRESENT_BIT(MDIO_MMD_PCS)
-#define MDIO_MMDREG_DEVS_PMAPMD	DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)
-#define MDIO_MMDREG_DEVS_AN	DEV_PRESENT_BIT(MDIO_MMD_AN)
-#define MDIO_MMDREG_DEVS_C22EXT	DEV_PRESENT_BIT(MDIO_MMD_C22EXT)
-
-/* Bits in MMDREG_SPEED */
-#define MDIO_MMDREG_SPEED_10G_LBN	0
-#define MDIO_MMDREG_SPEED_10G_WIDTH	1
-#define MDIO_MMDREG_SPEED_1000M_LBN	4
-#define MDIO_MMDREG_SPEED_1000M_WIDTH	1
-#define MDIO_MMDREG_SPEED_100M_LBN	5
-#define MDIO_MMDREG_SPEED_100M_WIDTH	1
-#define MDIO_MMDREG_SPEED_10M_LBN	6
-#define MDIO_MMDREG_SPEED_10M_WIDTH	1
-
-/* Bits in MMDREG_STAT2 */
-#define MDIO_MMDREG_STAT2_PRESENT_VAL	(2)
-#define MDIO_MMDREG_STAT2_PRESENT_LBN	(14)
-#define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2)
-
-/* Bits in MMDREG_TXDIS */
-#define MDIO_MMDREG_TXDIS_GLOBAL_LBN    (0)
-#define MDIO_MMDREG_TXDIS_GLOBAL_WIDTH  (1)
-
-/* MMD-specific bits, ordered by MMD, then register */
-#define MDIO_PMAPMD_CTRL1_LBACK_LBN	(0)
-#define MDIO_PMAPMD_CTRL1_LBACK_WIDTH	(1)
-
-/* PMA type (4 bits) */
-#define MDIO_PMAPMD_CTRL2_10G_CX4	(0x0)
-#define MDIO_PMAPMD_CTRL2_10G_EW	(0x1)
-#define MDIO_PMAPMD_CTRL2_10G_LW	(0x2)
-#define MDIO_PMAPMD_CTRL2_10G_SW	(0x3)
-#define MDIO_PMAPMD_CTRL2_10G_LX4	(0x4)
-#define MDIO_PMAPMD_CTRL2_10G_ER	(0x5)
-#define MDIO_PMAPMD_CTRL2_10G_LR	(0x6)
-#define MDIO_PMAPMD_CTRL2_10G_SR	(0x7)
-/* Reserved */
-#define MDIO_PMAPMD_CTRL2_10G_BT	(0x9)
-/* Reserved */
-/* Reserved */
-#define MDIO_PMAPMD_CTRL2_1G_BT		(0xc)
-/* Reserved */
-#define MDIO_PMAPMD_CTRL2_100_BT	(0xe)
-#define MDIO_PMAPMD_CTRL2_10_BT		(0xf)
-#define MDIO_PMAPMD_CTRL2_TYPE_MASK	(0xf)
-
-/* PMA 10GBT registers */
-#define MDIO_PMAPMD_10GBT_TXPWR		(131)
-#define MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN (0)
-#define MDIO_PMAPMD_10GBT_TXPWR_SHORT_WIDTH (1)
-
-/* PHY XGXS Status 2 */
-#define MDIO_PHYXS_STATUS2              (8)
-#define MDIO_PHYXS_STATUS2_RX_FAULT_LBN 10
-
-/* PHY XGXS lane state */
-#define MDIO_PHYXS_LANE_STATE		(0x18)
-#define MDIO_PHYXS_LANE_ALIGNED_LBN	(12)
-
-/* AN registers */
-#define MDIO_AN_CTRL_XNP_LBN		13
-#define MDIO_AN_STATUS			(1)
-#define MDIO_AN_STATUS_XNP_LBN		(7)
-#define MDIO_AN_STATUS_PAGE_LBN		(6)
-#define MDIO_AN_STATUS_AN_DONE_LBN	(5)
-#define MDIO_AN_STATUS_LP_AN_CAP_LBN	(0)
-
-#define MDIO_AN_ADVERTISE		16
-#define MDIO_AN_ADVERTISE_XNP_LBN	12
-#define MDIO_AN_LPA			19
-#define MDIO_AN_XNP			22
-#define MDIO_AN_LPA_XNP			25
-
-#define MDIO_AN_10GBT_CTRL		32
-#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN	12
-#define MDIO_AN_10GBT_STATUS		(33)
-#define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
-#define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
-#define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */
-#define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */
-#define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */
-#define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */
-#define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9)  /* LP Training Reset Request */
-
+static inline unsigned efx_mdio_id_rev(u32 id) { return id & 0xf; }
+static inline unsigned efx_mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
+extern unsigned efx_mdio_id_oui(u32 id);
 
-/* Packing of the prt and dev arguments of clause 45 style MDIO into a
- * single int so they can be passed into the mdio_read/write functions
- * that currently exist. Note that as Falcon is the only current user,
- * the packed form is chosen to match what Falcon needs to write into
- * a register. This is checked at compile-time so do not change it. If
- * your target chip needs things layed out differently you will need
- * to unpack the arguments in your chip-specific mdio functions.
- */
- /* These are defined by the standard. */
-#define MDIO45_PRT_ID_WIDTH  (5)
-#define MDIO45_DEV_ID_WIDTH  (5)
-
-/* The prt ID is just packed in immediately to the left of the dev ID */
-#define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH)
-
-#define MDIO45_PRT_ID_MASK   ((1 << MDIO45_PRT_DEV_WIDTH) - 1)
-/* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */
-#define MDIO45_XPRT_ID_WIDTH   (MDIO45_PRT_DEV_WIDTH + 1)
-#define MDIO45_XPRT_ID_MASK   ((1 << MDIO45_XPRT_ID_WIDTH) - 1)
-#define MDIO45_XPRT_ID_IS10G   (1 << (MDIO45_XPRT_ID_WIDTH - 1))
-
-
-#define MDIO45_PRT_ID_COMP_LBN   MDIO45_DEV_ID_WIDTH
-#define MDIO45_PRT_ID_COMP_WIDTH  MDIO45_PRT_ID_WIDTH
-#define MDIO45_DEV_ID_COMP_LBN    0
-#define MDIO45_DEV_ID_COMP_WIDTH  MDIO45_DEV_ID_WIDTH
-
-/* Compose port and device into a phy_id */
-static inline int mdio_clause45_pack(u8 prt, u8 dev)
-{
-	efx_dword_t phy_id;
-	EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt,
-			     MDIO45_DEV_ID_COMP, dev);
-	return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id);
-}
-
-static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev)
+static inline int efx_mdio_read(struct efx_nic *efx, int devad, int addr)
 {
-	efx_dword_t phy_id;
-	EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val);
-	*prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP);
-	*dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP);
+	return efx->mdio.mdio_read(efx->net_dev, efx->mdio.prtad, devad, addr);
 }
 
-static inline int mdio_clause45_read(struct efx_nic *efx,
-				     u8 prt, u8 dev, u16 addr)
+static inline void
+efx_mdio_write(struct efx_nic *efx, int devad, int addr, int value)
 {
-	return efx->mii.mdio_read(efx->net_dev,
-				  mdio_clause45_pack(prt, dev), addr);
+	efx->mdio.mdio_write(efx->net_dev, efx->mdio.prtad, devad, addr, value);
 }
 
-static inline void mdio_clause45_write(struct efx_nic *efx,
-				       u8 prt, u8 dev, u16 addr, int value)
+static inline u32 efx_mdio_read_id(struct efx_nic *efx, int mmd)
 {
-	efx->mii.mdio_write(efx->net_dev,
-			    mdio_clause45_pack(prt, dev), addr, value);
-}
-
-
-static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd)
-{
-	int phy_id = efx->mii.phy_id;
-	u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW);
-	u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI);
+	u16 id_low = efx_mdio_read(efx, mmd, MDIO_DEVID2);
+	u16 id_hi = efx_mdio_read(efx, mmd, MDIO_DEVID1);
 	return (id_hi << 16) | (id_low);
 }
 
-static inline bool mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx)
+static inline bool efx_mdio_phyxgxs_lane_sync(struct efx_nic *efx)
 {
 	int i, lane_status;
 	bool sync;
 
 	for (i = 0; i < 2; ++i)
-		lane_status = mdio_clause45_read(efx, efx->mii.phy_id,
-						 MDIO_MMD_PHYXS,
-						 MDIO_PHYXS_LANE_STATE);
+		lane_status = efx_mdio_read(efx, MDIO_MMD_PHYXS,
+					    MDIO_PHYXS_LNSTAT);
 
-	sync = !!(lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN));
+	sync = !!(lane_status & MDIO_PHYXS_LNSTAT_ALIGN);
 	if (!sync)
 		EFX_LOG(efx, "XGXS lane status: %x\n", lane_status);
 	return sync;
 }
 
-extern const char *mdio_clause45_mmd_name(int mmd);
+extern const char *efx_mdio_mmd_name(int mmd);
 
 /*
  * Reset a specific MMD and wait for reset to clear.
@@ -258,54 +64,44 @@ extern const char *mdio_clause45_mmd_name(int mmd);
  *
  * This function will sleep
  */
-extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd,
-				   int spins, int spintime);
+extern int efx_mdio_reset_mmd(struct efx_nic *efx, int mmd,
+			      int spins, int spintime);
 
-/* As mdio_clause45_check_mmd but for multiple MMDs */
-int mdio_clause45_check_mmds(struct efx_nic *efx,
-			     unsigned int mmd_mask, unsigned int fatal_mask);
+/* As efx_mdio_check_mmd but for multiple MMDs */
+int efx_mdio_check_mmds(struct efx_nic *efx,
+			unsigned int mmd_mask, unsigned int fatal_mask);
 
 /* Check the link status of specified mmds in bit mask */
-extern bool mdio_clause45_links_ok(struct efx_nic *efx,
-				   unsigned int mmd_mask);
+extern bool efx_mdio_links_ok(struct efx_nic *efx, unsigned int mmd_mask);
 
 /* Generic transmit disable support though PMAPMD */
-extern void mdio_clause45_transmit_disable(struct efx_nic *efx);
+extern void efx_mdio_transmit_disable(struct efx_nic *efx);
 
 /* Generic part of reconfigure: set/clear loopback bits */
-extern void mdio_clause45_phy_reconfigure(struct efx_nic *efx);
+extern void efx_mdio_phy_reconfigure(struct efx_nic *efx);
 
 /* Set the power state of the specified MMDs */
-extern void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
-					  int low_power, unsigned int mmd_mask);
-
-/* Read (some of) the PHY settings over MDIO */
-extern void mdio_clause45_get_settings(struct efx_nic *efx,
-				       struct ethtool_cmd *ecmd);
-
-/* Read (some of) the PHY settings over MDIO */
-extern void
-mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd,
-			       u32 xnp, u32 xnp_lpa);
+extern void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
+				     int low_power, unsigned int mmd_mask);
 
 /* Set (some of) the PHY settings over MDIO */
-extern int mdio_clause45_set_settings(struct efx_nic *efx,
-				      struct ethtool_cmd *ecmd);
-
-/* Set pause parameters to be advertised through AN (if available) */
-extern void mdio_clause45_set_pause(struct efx_nic *efx);
+extern int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd);
 
 /* Get pause parameters from AN if available (otherwise return
  * requested pause parameters)
  */
-enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx);
+enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx);
 
 /* Wait for specified MMDs to exit reset within a timeout */
-extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
-					 unsigned int mmd_mask);
+extern int efx_mdio_wait_reset_mmds(struct efx_nic *efx,
+				    unsigned int mmd_mask);
 
 /* Set or clear flag, debouncing */
-extern void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
-				   u16 addr, int bit, bool sense);
+static inline void
+efx_mdio_set_flag(struct efx_nic *efx, int devad, int addr,
+		  int mask, bool state)
+{
+	mdio_set_flag(&efx->mdio, efx->mdio.prtad, devad, addr, mask, state);
+}
 
 #endif /* EFX_MDIO_10G_H */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index e169e5dcd1e..5eabede9ac1 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -19,7 +19,7 @@
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
 #include <linux/timer.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include <linux/list.h>
 #include <linux/pci.h>
 #include <linux/device.h>
@@ -458,8 +458,6 @@ enum phy_type {
 	PHY_TYPE_MAX	/* Insert any new items before this */
 };
 
-#define PHY_ADDR_INVALID 0xff
-
 #define EFX_IS10G(efx) ((efx)->link_speed == 10000)
 
 enum nic_state {
@@ -497,8 +495,8 @@ struct efx_nic;
 
 /* Pseudo bit-mask flow control field */
 enum efx_fc_type {
-	EFX_FC_RX = 1,
-	EFX_FC_TX = 2,
+	EFX_FC_RX = FLOW_CTRL_RX,
+	EFX_FC_TX = FLOW_CTRL_TX,
 	EFX_FC_AUTO = 4,
 };
 
@@ -508,33 +506,15 @@ enum efx_mac_type {
 	EFX_XMAC = 2,
 };
 
-static inline unsigned int efx_fc_advertise(enum efx_fc_type wanted_fc)
-{
-	unsigned int adv = 0;
-	if (wanted_fc & EFX_FC_RX)
-		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-	if (wanted_fc & EFX_FC_TX)
-		adv ^= ADVERTISE_PAUSE_ASYM;
-	return adv;
-}
-
 static inline enum efx_fc_type efx_fc_resolve(enum efx_fc_type wanted_fc,
 					      unsigned int lpa)
 {
-	unsigned int adv = efx_fc_advertise(wanted_fc);
+	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
 
 	if (!(wanted_fc & EFX_FC_AUTO))
 		return wanted_fc;
 
-	if (adv & lpa & ADVERTISE_PAUSE_CAP)
-		return EFX_FC_RX | EFX_FC_TX;
-	if (adv & lpa & ADVERTISE_PAUSE_ASYM) {
-		if (adv & ADVERTISE_PAUSE_CAP)
-			return EFX_FC_RX;
-		if (lpa & ADVERTISE_PAUSE_CAP)
-			return EFX_FC_TX;
-	}
-	return 0;
+	return mii_resolve_flowctrl_fdx(mii_advertise_flowctrl(wanted_fc), lpa);
 }
 
 /**
@@ -758,7 +738,7 @@ union efx_multicast_hash {
  * @phy_lock: PHY access lock
  * @phy_op: PHY interface
  * @phy_data: PHY private data (including PHY-specific stats)
- * @mii: PHY interface
+ * @mdio: PHY MDIO interface
  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
  * @mac_up: MAC link state
  * @link_up: Link status
@@ -845,7 +825,7 @@ struct efx_nic {
 	struct work_struct phy_work;
 	struct efx_phy_operations *phy_op;
 	void *phy_data;
-	struct mii_if_info mii;
+	struct mdio_if_info mdio;
 	enum efx_phy_mode phy_mode;
 
 	bool mac_up;
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 66d7fe3db3e..01f9432c31e 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -450,17 +450,27 @@ static void efx_rx_packet_lro(struct efx_channel *channel,
 
 	/* Pass the skb/page into the LRO engine */
 	if (rx_buf->page) {
-		struct napi_gro_fraginfo info;
+		struct sk_buff *skb = napi_get_frags(napi);
 
-		info.frags[0].page = rx_buf->page;
-		info.frags[0].page_offset = efx_rx_buf_offset(rx_buf);
-		info.frags[0].size = rx_buf->len;
-		info.nr_frags = 1;
-		info.ip_summed = CHECKSUM_UNNECESSARY;
-		info.len = rx_buf->len;
+		if (!skb) {
+			put_page(rx_buf->page);
+			goto out;
+		}
+
+		skb_shinfo(skb)->frags[0].page = rx_buf->page;
+		skb_shinfo(skb)->frags[0].page_offset =
+			efx_rx_buf_offset(rx_buf);
+		skb_shinfo(skb)->frags[0].size = rx_buf->len;
+		skb_shinfo(skb)->nr_frags = 1;
+
+		skb->len = rx_buf->len;
+		skb->data_len = rx_buf->len;
+		skb->truesize += rx_buf->len;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-		napi_gro_frags(napi, &info);
+		napi_gro_frags(napi);
 
+out:
 		EFX_BUG_ON_PARANOID(rx_buf->skb);
 		rx_buf->page = NULL;
 	} else {
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 0a598084c51..b67ccca3fc1 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -80,39 +80,38 @@ struct efx_loopback_state {
  *
  **************************************************************************/
 
-static int efx_test_mii(struct efx_nic *efx, struct efx_self_tests *tests)
+static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
 {
 	int rc = 0;
+	int devad = __ffs(efx->mdio.mmds);
 	u16 physid1, physid2;
-	struct mii_if_info *mii = &efx->mii;
-	struct net_device *net_dev = efx->net_dev;
 
 	if (efx->phy_type == PHY_TYPE_NONE)
 		return 0;
 
 	mutex_lock(&efx->mac_lock);
-	tests->mii = -1;
+	tests->mdio = -1;
 
-	physid1 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID1);
-	physid2 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID2);
+	physid1 = efx_mdio_read(efx, devad, MDIO_DEVID1);
+	physid2 = efx_mdio_read(efx, devad, MDIO_DEVID2);
 
 	if ((physid1 == 0x0000) || (physid1 == 0xffff) ||
 	    (physid2 == 0x0000) || (physid2 == 0xffff)) {
-		EFX_ERR(efx, "no MII PHY present with ID %d\n",
-			mii->phy_id);
+		EFX_ERR(efx, "no MDIO PHY present with ID %d\n",
+			efx->mdio.prtad);
 		rc = -EINVAL;
 		goto out;
 	}
 
 	if (EFX_IS10G(efx)) {
-		rc = mdio_clause45_check_mmds(efx, efx->phy_op->mmds, 0);
+		rc = efx_mdio_check_mmds(efx, efx->phy_op->mmds, 0);
 		if (rc)
 			goto out;
 	}
 
 out:
 	mutex_unlock(&efx->mac_lock);
-	tests->mii = rc ? -1 : 1;
+	tests->mdio = rc ? -1 : 1;
 	return rc;
 }
 
@@ -439,6 +438,7 @@ static int efx_begin_loopback(struct efx_tx_queue *tx_queue)
 			kfree_skb(skb);
 			return -EPIPE;
 		}
+		efx->net_dev->trans_start = jiffies;
 	}
 
 	return 0;
@@ -673,7 +673,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	/* Online (i.e. non-disruptive) testing
 	 * This checks interrupt generation, event delivery and PHY presence. */
 
-	rc = efx_test_mii(efx, tests);
+	rc = efx_test_mdio(efx, tests);
 	if (rc && !rc_test)
 		rc_test = rc;
 
diff --git a/drivers/net/sfc/selftest.h b/drivers/net/sfc/selftest.h
index 39451cf938c..f6feee04c96 100644
--- a/drivers/net/sfc/selftest.h
+++ b/drivers/net/sfc/selftest.h
@@ -32,7 +32,7 @@ struct efx_loopback_self_tests {
  */
 struct efx_self_tests {
 	/* online tests */
-	int mii;
+	int mdio;
 	int nvram;
 	int interrupt;
 	int eventq_dma[EFX_MAX_CHANNELS];
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 4eac5da81e5..cee00ad49b5 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -296,7 +296,6 @@ static int sfe4001_check_hw(struct efx_nic *efx)
 
 static struct i2c_board_info sfe4001_hwmon_info = {
 	I2C_BOARD_INFO("max6647", 0x4e),
-	.irq		= -1,
 };
 
 /* This board uses an I2C expander to provider power to the PHY, which needs to
@@ -389,12 +388,10 @@ static void sfn4111t_fini(struct efx_nic *efx)
 
 static struct i2c_board_info sfn4111t_a0_hwmon_info = {
 	I2C_BOARD_INFO("max6647", 0x4e),
-	.irq		= -1,
 };
 
 static struct i2c_board_info sfn4111t_r5_hwmon_info = {
 	I2C_BOARD_INFO("max6646", 0x4d),
-	.irq		= -1,
 };
 
 int sfn4111t_init(struct efx_nic *efx)
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index e61dc4d4741..f4d509015f7 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -23,10 +23,10 @@
  * clause 22 extension MMD, but since it doesn't have all the generic
  * MMD registers it is pointless to include it here.
  */
-#define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PMAPMD	| \
-				 MDIO_MMDREG_DEVS_PCS		| \
-				 MDIO_MMDREG_DEVS_PHYXS		| \
-				 MDIO_MMDREG_DEVS_AN)
+#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD	| \
+				 MDIO_DEVS_PCS		| \
+				 MDIO_DEVS_PHYXS	| \
+				 MDIO_DEVS_AN)
 
 #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
 			   (1 << LOOPBACK_PCS) |	\
@@ -44,18 +44,6 @@
  */
 #define MAX_BAD_LP_TRIES	(5)
 
-/* LASI Control */
-#define PMA_PMD_LASI_CTRL	36866
-#define PMA_PMD_LASI_STATUS	36869
-#define PMA_PMD_LS_ALARM_LBN	0
-#define PMA_PMD_LS_ALARM_WIDTH	1
-#define PMA_PMD_TX_ALARM_LBN	1
-#define PMA_PMD_TX_ALARM_WIDTH	1
-#define PMA_PMD_RX_ALARM_LBN	2
-#define PMA_PMD_RX_ALARM_WIDTH	1
-#define PMA_PMD_AN_ALARM_LBN	3
-#define PMA_PMD_AN_ALARM_WIDTH	1
-
 /* Extended control register */
 #define PMA_PMD_XCONTROL_REG	49152
 #define PMA_PMD_EXT_GMII_EN_LBN	1
@@ -75,6 +63,7 @@
 
 /* extended status register */
 #define PMA_PMD_XSTATUS_REG	49153
+#define PMA_PMD_XSTAT_MDIX_LBN	14
 #define PMA_PMD_XSTAT_FLP_LBN   (12)
 
 /* LED control register */
@@ -153,10 +142,6 @@
 #define LOOPBACK_NEAR_LBN   (8)
 #define LOOPBACK_NEAR_WIDTH (1)
 
-#define PCS_10GBASET_STAT1       32
-#define PCS_10GBASET_BLKLK_LBN   0
-#define PCS_10GBASET_BLKLK_WIDTH 1
-
 /* Boot status register */
 #define PCS_BOOT_STATUS_REG		53248
 #define PCS_BOOT_FATAL_ERROR_LBN	0
@@ -206,10 +191,8 @@ static ssize_t show_phy_short_reach(struct device *dev,
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 	int reg;
 
-	reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_PMAPMD_10GBT_TXPWR);
-	return sprintf(buf, "%d\n",
-		       !!(reg & (1 << MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN)));
+	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR);
+	return sprintf(buf, "%d\n", !!(reg & MDIO_PMA_10GBT_TXPWR_SHORT));
 }
 
 static ssize_t set_phy_short_reach(struct device *dev,
@@ -219,10 +202,9 @@ static ssize_t set_phy_short_reach(struct device *dev,
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 
 	rtnl_lock();
-	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			       MDIO_PMAPMD_10GBT_TXPWR,
-			       MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN,
-			       count != 0 && *buf != '0');
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
+			  MDIO_PMA_10GBT_TXPWR_SHORT,
+			  count != 0 && *buf != '0');
 	efx_reconfigure_port(efx);
 	rtnl_unlock();
 
@@ -238,9 +220,8 @@ int sft9001_wait_boot(struct efx_nic *efx)
 	int boot_stat;
 
 	for (;;) {
-		boot_stat = mdio_clause45_read(efx, efx->mii.phy_id,
-					       MDIO_MMD_PCS,
-					       PCS_BOOT_STATUS_REG);
+		boot_stat = efx_mdio_read(efx, MDIO_MMD_PCS,
+					  PCS_BOOT_STATUS_REG);
 		if (boot_stat >= 0) {
 			EFX_LOG(efx, "PHY boot status = %#x\n", boot_stat);
 			switch (boot_stat &
@@ -286,38 +267,32 @@ int sft9001_wait_boot(struct efx_nic *efx)
 
 static int tenxpress_init(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
 	int reg;
 
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
 		/* Enable 312.5 MHz clock */
-		mdio_clause45_write(efx, phy_id,
-				    MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
-				    1 << CLK312_EN_LBN);
+		efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
+			       1 << CLK312_EN_LBN);
 	} else {
 		/* Enable 312.5 MHz clock and GMII */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 PMA_PMD_XCONTROL_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
 		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
 			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
 			(1 << PMA_PMD_EXT_CLK312_LBN) |
 			(1 << PMA_PMD_EXT_ROBUST_LBN));
 
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_XCONTROL_REG, reg);
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG, GPHY_ISOLATE_LBN,
-				       false);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+		efx_mdio_set_flag(efx, MDIO_MMD_C22EXT,
+			      GPHY_XCONTROL_REG, 1 << GPHY_ISOLATE_LBN,
+			      false);
 	}
 
 	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
-				       PMA_PMD_LED_CTRL_REG,
-				       PMA_PMA_LED_ACTIVITY_LBN,
-				       true);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_LED_OVERR_REG, PMA_PMD_LED_DEFAULT);
+		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
+				  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
+			       PMA_PMD_LED_DEFAULT);
 	}
 
 	return 0;
@@ -337,22 +312,19 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
 		if (efx->phy_type == PHY_TYPE_SFT9001A) {
 			int reg;
-			reg = mdio_clause45_read(efx, efx->mii.phy_id,
-						 MDIO_MMD_PMAPMD,
-						 PMA_PMD_XCONTROL_REG);
+			reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					    PMA_PMD_XCONTROL_REG);
 			reg |= (1 << PMA_PMD_EXT_SSR_LBN);
-			mdio_clause45_write(efx, efx->mii.phy_id,
-					    MDIO_MMD_PMAPMD,
-					    PMA_PMD_XCONTROL_REG, reg);
+			efx_mdio_write(efx, MDIO_MMD_PMAPMD,
+				       PMA_PMD_XCONTROL_REG, reg);
 			mdelay(200);
 		}
 
-		rc = mdio_clause45_wait_reset_mmds(efx,
-						   TENXPRESS_REQUIRED_DEVS);
+		rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
 			goto fail;
 
-		rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
+		rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
 		if (rc < 0)
 			goto fail;
 	}
@@ -360,7 +332,6 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;
-	mdio_clause45_set_pause(efx);
 
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
@@ -395,17 +366,14 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 	efx_stats_disable(efx);
 
 	/* Initiate reset */
-	reg = mdio_clause45_read(efx, efx->mii.phy_id,
-				 MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
+	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
 	reg |= (1 << PMA_PMD_EXT_SSR_LBN);
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_XCONTROL_REG, reg);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
 
 	mdelay(200);
 
 	/* Wait for the blocks to come out of reset */
-	rc = mdio_clause45_wait_reset_mmds(efx,
-					   TENXPRESS_REQUIRED_DEVS);
+	rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
 		goto out;
 
@@ -424,7 +392,6 @@ out:
 static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 {
 	struct tenxpress_phy_data *pd = efx->phy_data;
-	int phy_id = efx->mii.phy_id;
 	bool bad_lp;
 	int reg;
 
@@ -432,11 +399,10 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 		bad_lp = false;
 	} else {
 		/* Check that AN has started but not completed. */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_AN_STATUS);
-		if (!(reg & (1 << MDIO_AN_STATUS_LP_AN_CAP_LBN)))
+		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1);
+		if (!(reg & MDIO_AN_STAT1_LPABLE))
 			return; /* LP status is unknown */
-		bad_lp = !(reg & (1 << MDIO_AN_STATUS_AN_DONE_LBN));
+		bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE);
 		if (bad_lp)
 			pd->bad_lp_tries++;
 	}
@@ -448,8 +414,8 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 	/* Use the RX (red) LED as an error indicator once we've seen AN
 	 * failure several times in a row, and also log a message. */
 	if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 PMA_PMD_LED_OVERR_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+				    PMA_PMD_LED_OVERR_REG);
 		reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN);
 		if (!bad_lp) {
 			reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
@@ -460,23 +426,22 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 				" supports 10GBASE-T ONLY, so no link can"
 				" be established\n");
 		}
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_LED_OVERR_REG, reg);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD,
+			       PMA_PMD_LED_OVERR_REG, reg);
 		pd->bad_lp_tries = bad_lp;
 	}
 }
 
 static bool sfx7101_link_ok(struct efx_nic *efx)
 {
-	return mdio_clause45_links_ok(efx,
-				      MDIO_MMDREG_DEVS_PMAPMD |
-				      MDIO_MMDREG_DEVS_PCS |
-				      MDIO_MMDREG_DEVS_PHYXS);
+	return efx_mdio_links_ok(efx,
+				 MDIO_DEVS_PMAPMD |
+				 MDIO_DEVS_PCS |
+				 MDIO_DEVS_PHYXS);
 }
 
 static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
 	u32 reg;
 
 	if (efx_phy_mode_disabled(efx->phy_mode))
@@ -484,50 +449,43 @@ static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	else if (efx->loopback_mode == LOOPBACK_GPHY)
 		return true;
 	else if (efx->loopback_mode)
-		return mdio_clause45_links_ok(efx,
-					      MDIO_MMDREG_DEVS_PMAPMD |
-					      MDIO_MMDREG_DEVS_PHYXS);
+		return efx_mdio_links_ok(efx,
+					 MDIO_DEVS_PMAPMD |
+					 MDIO_DEVS_PHYXS);
 
 	/* We must use the same definition of link state as LASI,
 	 * otherwise we can miss a link state transition
 	 */
 	if (ecmd->speed == 10000) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
-					 PCS_10GBASET_STAT1);
-		return reg & (1 << PCS_10GBASET_BLKLK_LBN);
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1);
+		return reg & MDIO_PCS_10GBRT_STAT1_BLKLK;
 	} else {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 C22EXT_STATUS_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_STATUS_REG);
 		return reg & (1 << C22EXT_STATUS_LINK_LBN);
 	}
 }
 
 static void tenxpress_ext_loopback(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
-
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
-			       PHYXS_TEST1, LOOPBACK_NEAR_LBN,
-			       efx->loopback_mode == LOOPBACK_PHYXS);
+	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1,
+			  1 << LOOPBACK_NEAR_LBN,
+			  efx->loopback_mode == LOOPBACK_PHYXS);
 	if (efx->phy_type != PHY_TYPE_SFX7101)
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG,
-				       GPHY_LOOPBACK_NEAR_LBN,
-				       efx->loopback_mode == LOOPBACK_GPHY);
+		efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, GPHY_XCONTROL_REG,
+				  1 << GPHY_LOOPBACK_NEAR_LBN,
+				  efx->loopback_mode == LOOPBACK_GPHY);
 }
 
 static void tenxpress_low_power(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
-
 	if (efx->phy_type == PHY_TYPE_SFX7101)
-		mdio_clause45_set_mmds_lpower(
+		efx_mdio_set_mmds_lpower(
 			efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
 			TENXPRESS_REQUIRED_DEVS);
 	else
-		mdio_clause45_set_flag(
-			efx, phy_id, MDIO_MMD_PMAPMD,
-			PMA_PMD_XCONTROL_REG, PMA_PMD_EXT_LPOWER_LBN,
+		efx_mdio_set_flag(
+			efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG,
+			1 << PMA_PMD_EXT_LPOWER_LBN,
 			!!(efx->phy_mode & PHY_MODE_LOW_POWER));
 }
 
@@ -568,8 +526,8 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 		WARN_ON(rc);
 	}
 
-	mdio_clause45_transmit_disable(efx);
-	mdio_clause45_phy_reconfigure(efx);
+	efx_mdio_transmit_disable(efx);
+	efx_mdio_phy_reconfigure(efx);
 	tenxpress_ext_loopback(efx);
 
 	phy_data->loopback_mode = efx->loopback_mode;
@@ -585,7 +543,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 		efx->link_fd = ecmd.duplex == DUPLEX_FULL;
 		efx->link_up = sft9001_link_ok(efx, &ecmd);
 	}
-	efx->link_fc = mdio_clause45_get_pause(efx);
+	efx->link_fc = efx_mdio_get_pause(efx);
 }
 
 /* Poll PHY for interrupt */
@@ -599,7 +557,7 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 		if (link_ok != efx->link_up) {
 			change = true;
 		} else {
-			unsigned int link_fc = mdio_clause45_get_pause(efx);
+			unsigned int link_fc = efx_mdio_get_pause(efx);
 			if (link_fc != efx->link_fc)
 				change = true;
 		}
@@ -609,10 +567,9 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 		if (link_ok != efx->link_up)
 			change = true;
 	} else {
-		u32 status = mdio_clause45_read(efx, efx->mii.phy_id,
-						MDIO_MMD_PMAPMD,
-						PMA_PMD_LASI_STATUS);
-		if (status & (1 << PMA_PMD_LS_ALARM_LBN))
+		int status = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					   MDIO_PMA_LASI_STAT);
+		if (status & MDIO_PMA_LASI_LSALARM)
 			change = true;
 	}
 
@@ -634,8 +591,7 @@ static void tenxpress_phy_fini(struct efx_nic *efx)
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
 		/* Power down the LNPGA */
 		reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
-		mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_XCONTROL_REG, reg);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
 
 		/* Waiting here ensures that the board fini, which can turn
 		 * off the power to the PHY, won't get run until the LNPGA
@@ -661,8 +617,7 @@ void tenxpress_phy_blink(struct efx_nic *efx, bool blink)
 	else
 		reg = PMA_PMD_LED_DEFAULT;
 
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_LED_OVERR_REG, reg);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg);
 }
 
 static const char *const sfx7101_test_names[] = {
@@ -698,7 +653,6 @@ static const char *const sft9001_test_names[] = {
 static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 {
 	struct ethtool_cmd ecmd;
-	int phy_id = efx->mii.phy_id;
 	int rc = 0, rc2, i, ctrl_reg, res_reg;
 
 	if (flags & ETH_TEST_FL_OFFLINE)
@@ -717,11 +671,10 @@ static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 		 * must reset the PHY to resume normal service. */
 		ctrl_reg |= (1 << CDIAG_CTRL_BRK_LINK_LBN);
 	}
-	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_CDIAG_CTRL_REG, ctrl_reg);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG,
+		       ctrl_reg);
 	i = 0;
-	while (mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				  PMA_PMD_CDIAG_CTRL_REG) &
+	while (efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG) &
 	       (1 << CDIAG_CTRL_IN_PROG_LBN)) {
 		if (++i == 50) {
 			rc = -ETIMEDOUT;
@@ -729,15 +682,13 @@ static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 		}
 		msleep(100);
 	}
-	res_reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-				     PMA_PMD_CDIAG_RES_REG);
+	res_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_RES_REG);
 	for (i = 0; i < 4; i++) {
 		int pair_res =
 			(res_reg >> (CDIAG_RES_A_LBN - i * CDIAG_RES_WIDTH))
 			& ((1 << CDIAG_RES_WIDTH) - 1);
-		int len_reg = mdio_clause45_read(efx, efx->mii.phy_id,
-						 MDIO_MMD_PMAPMD,
-						 PMA_PMD_CDIAG_LEN_REG + i);
+		int len_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					    PMA_PMD_CDIAG_LEN_REG + i);
 		if (pair_res == CDIAG_RES_OK)
 			results[1 + i] = 1;
 		else if (pair_res == CDIAG_RES_INVALID)
@@ -769,36 +720,39 @@ out:
 static void
 tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
 	u32 adv = 0, lpa = 0;
 	int reg;
 
 	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_CTRL);
+		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL);
 		if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
 			adv |= ADVERTISED_1000baseT_Full;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_STATUS);
+		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_STATUS);
 		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
 			lpa |= ADVERTISED_1000baseT_Half;
 		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
 			lpa |= ADVERTISED_1000baseT_Full;
 	}
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-				 MDIO_AN_10GBT_CTRL);
-	if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL);
+	if (reg & MDIO_AN_10GBT_CTRL_ADV10G)
 		adv |= ADVERTISED_10000baseT_Full;
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-				 MDIO_AN_10GBT_STATUS);
-	if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
+	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (reg & MDIO_AN_10GBT_STAT_LP10G)
 		lpa |= ADVERTISED_10000baseT_Full;
 
-	mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
+	mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);
 
-	if (efx->phy_type != PHY_TYPE_SFX7101)
+	if (efx->phy_type != PHY_TYPE_SFX7101) {
 		ecmd->supported |= (SUPPORTED_100baseT_Full |
 				    SUPPORTED_1000baseT_Full);
+		if (ecmd->speed != SPEED_10000) {
+			ecmd->eth_tp_mdix =
+				(efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					       PMA_PMD_XSTATUS_REG) &
+				 (1 << PMA_PMD_XSTAT_MDIX_LBN))
+				? ETH_TP_MDI_X : ETH_TP_MDI;
+		}
+	}
 
 	/* In loopback, the PHY automatically brings up the correct interface,
 	 * but doesn't advertise the correct speed. So override it */
@@ -813,29 +767,24 @@ static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	if (!ecmd->autoneg)
 		return -EINVAL;
 
-	return mdio_clause45_set_settings(efx, ecmd);
+	return efx_mdio_set_settings(efx, ecmd);
 }
 
 static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
-			       MDIO_AN_10GBT_CTRL,
-			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
-			       advertising & ADVERTISED_10000baseT_Full);
+	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+			  MDIO_AN_10GBT_CTRL_ADV10G,
+			  advertising & ADVERTISED_10000baseT_Full);
 }
 
 static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy_id = efx->mii.phy_id;
-
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-			       C22EXT_MSTSLV_CTRL,
-			       C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
-			       advertising & ADVERTISED_1000baseT_Full);
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
-			       MDIO_AN_10GBT_CTRL,
-			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
-			       advertising & ADVERTISED_10000baseT_Full);
+	efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL,
+			  1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+			  advertising & ADVERTISED_1000baseT_Full);
+	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+			  MDIO_AN_10GBT_CTRL_ADV10G,
+			  advertising & ADVERTISED_10000baseT_Full);
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index d6681edb701..14a14788566 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -360,13 +360,6 @@ inline int efx_xmit(struct efx_nic *efx,
 
 	/* Map fragments for DMA and add to TX queue */
 	rc = efx_enqueue_skb(tx_queue, skb);
-	if (unlikely(rc != NETDEV_TX_OK))
-		goto out;
-
-	/* Update last TX timer */
-	efx->net_dev->trans_start = jiffies;
-
- out:
 	return rc;
 }
 
diff --git a/drivers/net/sfc/xenpack.h b/drivers/net/sfc/xenpack.h
deleted file mode 100644
index b0d1f225b70..00000000000
--- a/drivers/net/sfc/xenpack.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_XENPACK_H
-#define EFX_XENPACK_H
-
-/* Exported functions from Xenpack standard PHY control */
-
-#include "mdio_10g.h"
-
-/****************************************************************************/
-/* XENPACK MDIO register extensions */
-#define MDIO_XP_LASI_RX_CTRL	(0x9000)
-#define MDIO_XP_LASI_TX_CTRL	(0x9001)
-#define MDIO_XP_LASI_CTRL	(0x9002)
-#define MDIO_XP_LASI_RX_STAT	(0x9003)
-#define MDIO_XP_LASI_TX_STAT	(0x9004)
-#define MDIO_XP_LASI_STAT	(0x9005)
-
-/* Control/Status bits */
-#define XP_LASI_LS_ALARM	(1 << 0)
-#define XP_LASI_TX_ALARM	(1 << 1)
-#define XP_LASI_RX_ALARM	(1 << 2)
-/* These two are Quake vendor extensions to the standard XENPACK defines */
-#define XP_LASI_LS_INTB		(1 << 3)
-#define XP_LASI_TEST		(1 << 7)
-
-/* Enable LASI interrupts for PHY */
-static inline void xenpack_enable_lasi_irqs(struct efx_nic *efx)
-{
-	int reg;
-	int phy_id = efx->mii.phy_id;
-	/* Read to clear LASI status register */
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_XP_LASI_STAT);
-
-	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-			    MDIO_XP_LASI_CTRL, XP_LASI_LS_ALARM);
-}
-
-/* Read the LASI interrupt status to clear the interrupt. */
-static inline int xenpack_clear_lasi_irqs(struct efx_nic *efx)
-{
-	/* Read to clear link status alarm */
-	return mdio_clause45_read(efx, efx->mii.phy_id,
-				  MDIO_MMD_PMAPMD, MDIO_XP_LASI_STAT);
-}
-
-/* Turn off LASI interrupts */
-static inline void xenpack_disable_lasi_irqs(struct efx_nic *efx)
-{
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    MDIO_XP_LASI_CTRL, 0);
-}
-
-#endif /* EFX_XENPACK_H */
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index bb1ef77d5f5..bb2e6afd082 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -15,13 +15,12 @@
 #include <linux/delay.h>
 #include "efx.h"
 #include "mdio_10g.h"
-#include "xenpack.h"
 #include "phy.h"
 #include "falcon.h"
 
-#define XFP_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PCS |	\
-			   MDIO_MMDREG_DEVS_PMAPMD |	\
-			   MDIO_MMDREG_DEVS_PHYXS)
+#define XFP_REQUIRED_DEVS (MDIO_DEVS_PCS |	\
+			   MDIO_DEVS_PMAPMD |	\
+			   MDIO_DEVS_PHYXS)
 
 #define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
 		       (1 << LOOPBACK_PMAPMD) |		\
@@ -49,8 +48,7 @@
 void xfp_set_led(struct efx_nic *p, int led, int mode)
 {
 	int addr = MDIO_QUAKE_LED0_REG + led;
-	mdio_clause45_write(p, p->mii.phy_id, MDIO_MMD_PMAPMD, addr,
-			    mode);
+	efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
 }
 
 struct xfp_phy_data {
@@ -63,14 +61,12 @@ struct xfp_phy_data {
 static int qt2025c_wait_reset(struct efx_nic *efx)
 {
 	unsigned long timeout = jiffies + 10 * HZ;
-	int phy_id = efx->mii.phy_id;
 	int reg, old_counter = 0;
 
 	/* Wait for firmware heartbeat to start */
 	for (;;) {
 		int counter;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
-					 PCS_FW_HEARTBEAT_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
 		if (reg < 0)
 			return reg;
 		counter = ((reg >> PCS_FW_HEARTB_LBN) &
@@ -86,8 +82,7 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
 
 	/* Wait for firmware status to look good */
 	for (;;) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
-					 PCS_UC8051_STATUS_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
 		if (reg < 0)
 			return reg;
 		if ((reg &
@@ -109,9 +104,9 @@ static int xfp_reset_phy(struct efx_nic *efx)
 {
 	int rc;
 
-	rc = mdio_clause45_reset_mmd(efx, MDIO_MMD_PHYXS,
-				     XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
-				     XFP_RESET_WAIT);
+	rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
+				XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
+				XFP_RESET_WAIT);
 	if (rc < 0)
 		goto fail;
 
@@ -126,8 +121,7 @@ static int xfp_reset_phy(struct efx_nic *efx)
 
 	/* Check that all the MMDs we expect are present and responding. We
 	 * expect faults on some if the link is down, but not on the PHY XS */
-	rc = mdio_clause45_check_mmds(efx, XFP_REQUIRED_DEVS,
-				      MDIO_MMDREG_DEVS_PHYXS);
+	rc = efx_mdio_check_mmds(efx, XFP_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
 	if (rc < 0)
 		goto fail;
 
@@ -143,7 +137,7 @@ static int xfp_reset_phy(struct efx_nic *efx)
 static int xfp_phy_init(struct efx_nic *efx)
 {
 	struct xfp_phy_data *phy_data;
-	u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS);
+	u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
 	int rc;
 
 	phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
@@ -152,8 +146,8 @@ static int xfp_phy_init(struct efx_nic *efx)
 	efx->phy_data = phy_data;
 
 	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
-		 devid, mdio_id_oui(devid), mdio_id_model(devid),
-		 mdio_id_rev(devid));
+		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
+		 efx_mdio_id_rev(devid));
 
 	phy_data->phy_mode = efx->phy_mode;
 
@@ -174,12 +168,13 @@ static int xfp_phy_init(struct efx_nic *efx)
 
 static void xfp_phy_clear_interrupt(struct efx_nic *efx)
 {
-	xenpack_clear_lasi_irqs(efx);
+	/* Read to clear link status alarm */
+	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
 }
 
 static int xfp_link_ok(struct efx_nic *efx)
 {
-	return mdio_clause45_links_ok(efx, XFP_REQUIRED_DEVS);
+	return efx_mdio_links_ok(efx, XFP_REQUIRED_DEVS);
 }
 
 static void xfp_phy_poll(struct efx_nic *efx)
@@ -200,9 +195,9 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
 		 * or optical transceivers, varying somewhat between
 		 * firmware versions.  Only 'static mode' appears to
 		 * cover everything. */
-		mdio_clause45_set_flag(
-			efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			PMA_PMD_FTX_CTRL2_REG, PMA_PMD_FTX_STATIC_LBN,
+		mdio_set_flag(
+			&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
+			PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
 			efx->phy_mode & PHY_MODE_TX_DISABLED ||
 			efx->phy_mode & PHY_MODE_LOW_POWER ||
 			efx->loopback_mode == LOOPBACK_PCS ||
@@ -213,10 +208,10 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
 		    (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
 			xfp_reset_phy(efx);
 
-		mdio_clause45_transmit_disable(efx);
+		efx_mdio_transmit_disable(efx);
 	}
 
-	mdio_clause45_phy_reconfigure(efx);
+	efx_mdio_phy_reconfigure(efx);
 
 	phy_data->phy_mode = efx->phy_mode;
 	efx->link_up = xfp_link_ok(efx);
@@ -225,6 +220,10 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
 	efx->link_fc = efx->wanted_fc;
 }
 
+static void xfp_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset(&efx->mdio, ecmd);
+}
 
 static void xfp_phy_fini(struct efx_nic *efx)
 {
@@ -243,8 +242,8 @@ struct efx_phy_operations falcon_xfp_phy_ops = {
 	.poll            = xfp_phy_poll,
 	.fini            = xfp_phy_fini,
 	.clear_interrupt = xfp_phy_clear_interrupt,
-	.get_settings    = mdio_clause45_get_settings,
-	.set_settings	 = mdio_clause45_set_settings,
+	.get_settings    = xfp_phy_get_settings,
+	.set_settings	 = efx_mdio_set_settings,
 	.mmds            = XFP_REQUIRED_DEVS,
 	.loopbacks       = XFP_LOOPBACKS,
 };
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 97d68560067..5fb88ca6dd7 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -709,6 +709,17 @@ static inline void setup_rx_ring(struct net_device *dev,
 	dma_sync_desc_dev(dev, &buf[i]);
 }
 
+static const struct net_device_ops sgiseeq_netdev_ops = {
+	.ndo_open		= sgiseeq_open,
+	.ndo_stop		= sgiseeq_close,
+	.ndo_start_xmit		= sgiseeq_start_xmit,
+	.ndo_tx_timeout		= timeout,
+	.ndo_set_multicast_list	= sgiseeq_set_multicast,
+	.ndo_set_mac_address	= sgiseeq_set_mac_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init sgiseeq_probe(struct platform_device *pdev)
 {
 	struct sgiseeq_platform_data *pd = pdev->dev.platform_data;
@@ -775,13 +786,8 @@ static int __init sgiseeq_probe(struct platform_device *pdev)
 			      SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT |
 			      SEEQ_CTRL_ENCARR;
 
-	dev->open		= sgiseeq_open;
-	dev->stop		= sgiseeq_close;
-	dev->hard_start_xmit	= sgiseeq_start_xmit;
-	dev->tx_timeout		= timeout;
+	dev->netdev_ops		= &sgiseeq_netdev_ops;
 	dev->watchdog_timeo	= (200 * HZ) / 1000;
-	dev->set_multicast_list	= sgiseeq_set_multicast;
-	dev->set_mac_address	= sgiseeq_set_mac_address;
 	dev->irq		= irq;
 
 	if (register_netdev(dev)) {
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 3ab28bb00c1..341882f959f 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -2,7 +2,7 @@
  *  SuperH Ethernet device driver
  *
  *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
- *  Copyright (C) 2008 Renesas Solutions Corp.
+ *  Copyright (C) 2008-2009 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -33,6 +33,226 @@
 
 #include "sh_eth.h"
 
+/* There is CPU dependent code */
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SH_ETH_RESET_DEFAULT	1
+static void sh_eth_set_duplex(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	if (mdp->duplex) /* Full */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+	else		/* Half */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+}
+
+static void sh_eth_set_rate(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	switch (mdp->speed) {
+	case 10: /* 10BASE */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_RTM, ioaddr + ECMR);
+		break;
+	case 100:/* 100BASE */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_RTM, ioaddr + ECMR);
+		break;
+	default:
+		break;
+	}
+}
+
+/* SH7724 */
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.set_duplex	= sh_eth_set_duplex,
+	.set_rate	= sh_eth_set_rate,
+
+	.ecsr_value	= ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
+	.ecsipr_value	= ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x01ff009f,
+
+	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
+	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
+			  EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,
+	.tx_error_check	= EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE,
+
+	.apr		= 1,
+	.mpr		= 1,
+	.tpauser	= 1,
+	.hw_swap	= 1,
+};
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+#define SH_ETH_HAS_TSU	1
+static void sh_eth_chip_reset(struct net_device *ndev)
+{
+	/* reset device */
+	ctrl_outl(ARSTR_ARSTR, ARSTR);
+	mdelay(1);
+}
+
+static void sh_eth_reset(struct net_device *ndev)
+{
+	u32 ioaddr = ndev->base_addr;
+	int cnt = 100;
+
+	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	while (cnt > 0) {
+		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
+			break;
+		mdelay(1);
+		cnt--;
+	}
+	if (cnt < 0)
+		printk(KERN_ERR "Device reset fail\n");
+
+	/* Table Init */
+	ctrl_outl(0x0, ioaddr + TDLAR);
+	ctrl_outl(0x0, ioaddr + TDFAR);
+	ctrl_outl(0x0, ioaddr + TDFXR);
+	ctrl_outl(0x0, ioaddr + TDFFR);
+	ctrl_outl(0x0, ioaddr + RDLAR);
+	ctrl_outl(0x0, ioaddr + RDFAR);
+	ctrl_outl(0x0, ioaddr + RDFXR);
+	ctrl_outl(0x0, ioaddr + RDFFR);
+}
+
+static void sh_eth_set_duplex(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	if (mdp->duplex) /* Full */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+	else		/* Half */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+}
+
+static void sh_eth_set_rate(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	switch (mdp->speed) {
+	case 10: /* 10BASE */
+		ctrl_outl(GECMR_10, ioaddr + GECMR);
+		break;
+	case 100:/* 100BASE */
+		ctrl_outl(GECMR_100, ioaddr + GECMR);
+		break;
+	case 1000: /* 1000BASE */
+		ctrl_outl(GECMR_1000, ioaddr + GECMR);
+		break;
+	default:
+		break;
+	}
+}
+
+/* sh7763 */
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.chip_reset	= sh_eth_chip_reset,
+	.set_duplex	= sh_eth_set_duplex,
+	.set_rate	= sh_eth_set_rate,
+
+	.ecsr_value	= ECSR_ICD | ECSR_MPD,
+	.ecsipr_value	= ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+
+	.tx_check	= EESR_TC1 | EESR_FTC,
+	.eesr_err_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \
+			  EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \
+			  EESR_ECI,
+	.tx_error_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \
+			  EESR_TFE,
+
+	.apr		= 1,
+	.mpr		= 1,
+	.tpauser	= 1,
+	.bculr		= 1,
+	.hw_swap	= 1,
+	.rpadir		= 1,
+	.no_trimd	= 1,
+	.no_ade		= 1,
+};
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define SH_ETH_RESET_DEFAULT	1
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+
+	.apr		= 1,
+	.mpr		= 1,
+	.tpauser	= 1,
+	.hw_swap	= 1,
+};
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SH_ETH_RESET_DEFAULT	1
+#define SH_ETH_HAS_TSU	1
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+};
+#endif
+
+static void sh_eth_set_default_cpu_data(struct sh_eth_cpu_data *cd)
+{
+	if (!cd->ecsr_value)
+		cd->ecsr_value = DEFAULT_ECSR_INIT;
+
+	if (!cd->ecsipr_value)
+		cd->ecsipr_value = DEFAULT_ECSIPR_INIT;
+
+	if (!cd->fcftr_value)
+		cd->fcftr_value = DEFAULT_FIFO_F_D_RFF | \
+				  DEFAULT_FIFO_F_D_RFD;
+
+	if (!cd->fdr_value)
+		cd->fdr_value = DEFAULT_FDR_INIT;
+
+	if (!cd->rmcr_value)
+		cd->rmcr_value = DEFAULT_RMCR_VALUE;
+
+	if (!cd->tx_check)
+		cd->tx_check = DEFAULT_TX_CHECK;
+
+	if (!cd->eesr_err_check)
+		cd->eesr_err_check = DEFAULT_EESR_ERR_CHECK;
+
+	if (!cd->tx_error_check)
+		cd->tx_error_check = DEFAULT_TX_ERROR_CHECK;
+}
+
+#if defined(SH_ETH_RESET_DEFAULT)
+/* Chip Reset */
+static void sh_eth_reset(struct net_device *ndev)
+{
+	u32 ioaddr = ndev->base_addr;
+
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	mdelay(3);
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
+}
+#endif
+
+#if defined(CONFIG_CPU_SH4)
+static void sh_eth_set_receive_align(struct sk_buff *skb)
+{
+	int reserve;
+
+	reserve = SH4_SKB_RX_ALIGN - ((u32)skb->data & (SH4_SKB_RX_ALIGN - 1));
+	if (reserve)
+		skb_reserve(skb, reserve);
+}
+#else
+static void sh_eth_set_receive_align(struct sk_buff *skb)
+{
+	skb_reserve(skb, SH2_SH3_SKB_RX_ALIGN);
+}
+#endif
+
+
 /* CPU <-> EDMAC endian convert */
 static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x)
 {
@@ -165,41 +385,6 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = sh_get_mdio,
 };
 
-/* Chip Reset */
-static void sh_eth_reset(struct net_device *ndev)
-{
-	u32 ioaddr = ndev->base_addr;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	int cnt = 100;
-
-	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
-	while (cnt > 0) {
-		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
-			break;
-		mdelay(1);
-		cnt--;
-	}
-	if (cnt < 0)
-		printk(KERN_ERR "Device reset fail\n");
-
-	/* Table Init */
-	ctrl_outl(0x0, ioaddr + TDLAR);
-	ctrl_outl(0x0, ioaddr + TDFAR);
-	ctrl_outl(0x0, ioaddr + TDFXR);
-	ctrl_outl(0x0, ioaddr + TDFFR);
-	ctrl_outl(0x0, ioaddr + RDLAR);
-	ctrl_outl(0x0, ioaddr + RDFAR);
-	ctrl_outl(0x0, ioaddr + RDFXR);
-	ctrl_outl(0x0, ioaddr + RDFFR);
-#else
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
-	mdelay(3);
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
-#endif
-}
-
 /* free skb and descriptor buffer */
 static void sh_eth_ring_free(struct net_device *ndev)
 {
@@ -228,7 +413,7 @@ static void sh_eth_ring_free(struct net_device *ndev)
 /* format skb and descriptor buffer */
 static void sh_eth_ring_format(struct net_device *ndev)
 {
-	u32 ioaddr = ndev->base_addr, reserve = 0;
+	u32 ioaddr = ndev->base_addr;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	int i;
 	struct sk_buff *skb;
@@ -250,37 +435,27 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		mdp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
+		dma_map_single(&ndev->dev, skb->tail, mdp->rx_buf_sz,
+				DMA_FROM_DEVICE);
 		skb->dev = ndev; /* Mark as being used by this device. */
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-		reserve = SH7763_SKB_ALIGN
-			- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
-		if (reserve)
-			skb_reserve(skb, reserve);
-#else
-		skb_reserve(skb, RX_OFFSET);
-#endif
+		sh_eth_set_receive_align(skb);
+
 		/* RX descriptor */
 		rxdesc = &mdp->rx_ring[i];
-		rxdesc->addr = (u32)skb->data & ~0x3UL;
+		rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
 		rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 
 		/* The size of the buffer is 16 byte boundary. */
-		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+		rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
 		/* Rx descriptor address set */
 		if (i == 0) {
-			ctrl_outl((u32)rxdesc, ioaddr + RDLAR);
+			ctrl_outl(mdp->rx_desc_dma, ioaddr + RDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			ctrl_outl((u32)rxdesc, ioaddr + RDFAR);
+			ctrl_outl(mdp->rx_desc_dma, ioaddr + RDFAR);
 #endif
 		}
 	}
 
-	/* Rx descriptor address set */
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl((u32)rxdesc, ioaddr + RDFXR);
-	ctrl_outl(0x1, ioaddr + RDFFR);
-#endif
-
 	mdp->dirty_rx = (u32) (i - RX_RING_SIZE);
 
 	/* Mark the last entry as wrapping the ring. */
@@ -296,19 +471,13 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		txdesc->buffer_length = 0;
 		if (i == 0) {
 			/* Tx descriptor address set */
-			ctrl_outl((u32)txdesc, ioaddr + TDLAR);
+			ctrl_outl(mdp->tx_desc_dma, ioaddr + TDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			ctrl_outl((u32)txdesc, ioaddr + TDFAR);
+			ctrl_outl(mdp->tx_desc_dma, ioaddr + TDFAR);
 #endif
 		}
 	}
 
-	/* Tx descriptor address set */
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl((u32)txdesc, ioaddr + TDFXR);
-	ctrl_outl(0x1, ioaddr + TDFFR);
-#endif
-
 	txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 }
 
@@ -331,7 +500,7 @@ static int sh_eth_ring_init(struct net_device *ndev)
 	mdp->rx_skbuff = kmalloc(sizeof(*mdp->rx_skbuff) * RX_RING_SIZE,
 				GFP_KERNEL);
 	if (!mdp->rx_skbuff) {
-		printk(KERN_ERR "%s: Cannot allocate Rx skb\n", ndev->name);
+		dev_err(&ndev->dev, "Cannot allocate Rx skb\n");
 		ret = -ENOMEM;
 		return ret;
 	}
@@ -339,7 +508,7 @@ static int sh_eth_ring_init(struct net_device *ndev)
 	mdp->tx_skbuff = kmalloc(sizeof(*mdp->tx_skbuff) * TX_RING_SIZE,
 				GFP_KERNEL);
 	if (!mdp->tx_skbuff) {
-		printk(KERN_ERR "%s: Cannot allocate Tx skb\n", ndev->name);
+		dev_err(&ndev->dev, "Cannot allocate Tx skb\n");
 		ret = -ENOMEM;
 		goto skb_ring_free;
 	}
@@ -350,8 +519,8 @@ static int sh_eth_ring_init(struct net_device *ndev)
 			GFP_KERNEL);
 
 	if (!mdp->rx_ring) {
-		printk(KERN_ERR "%s: Cannot allocate Rx Ring (size %d bytes)\n",
-			ndev->name, rx_ringsize);
+		dev_err(&ndev->dev, "Cannot allocate Rx Ring (size %d bytes)\n",
+			rx_ringsize);
 		ret = -ENOMEM;
 		goto desc_ring_free;
 	}
@@ -363,8 +532,8 @@ static int sh_eth_ring_init(struct net_device *ndev)
 	mdp->tx_ring = dma_alloc_coherent(NULL, tx_ringsize, &mdp->tx_desc_dma,
 			GFP_KERNEL);
 	if (!mdp->tx_ring) {
-		printk(KERN_ERR "%s: Cannot allocate Tx Ring (size %d bytes)\n",
-			ndev->name, tx_ringsize);
+		dev_err(&ndev->dev, "Cannot allocate Tx Ring (size %d bytes)\n",
+			tx_ringsize);
 		ret = -ENOMEM;
 		goto desc_ring_free;
 	}
@@ -394,44 +563,43 @@ static int sh_eth_dev_init(struct net_device *ndev)
 
 	/* Descriptor format */
 	sh_eth_ring_format(ndev);
-	ctrl_outl(RPADIR_INIT, ioaddr + RPADIR);
+	if (mdp->cd->rpadir)
+		ctrl_outl(mdp->cd->rpadir_value, ioaddr + RPADIR);
 
 	/* all sh_eth int mask */
 	ctrl_outl(0, ioaddr + EESIPR);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(EDMR_EL, ioaddr + EDMR);
-#else
-	ctrl_outl(0, ioaddr + EDMR);	/* Endian change */
+#if defined(__LITTLE_ENDIAN__)
+	if (mdp->cd->hw_swap)
+		ctrl_outl(EDMR_EL, ioaddr + EDMR);
+	else
 #endif
+		ctrl_outl(0, ioaddr + EDMR);
 
 	/* FIFO size set */
-	ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR);
+	ctrl_outl(mdp->cd->fdr_value, ioaddr + FDR);
 	ctrl_outl(0, ioaddr + TFTR);
 
 	/* Frame recv control */
-	ctrl_outl(0, ioaddr + RMCR);
+	ctrl_outl(mdp->cd->rmcr_value, ioaddr + RMCR);
 
 	rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
 	tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
 	ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	/* Burst sycle set */
-	ctrl_outl(0x800, ioaddr + BCULR);
-#endif
+	if (mdp->cd->bculr)
+		ctrl_outl(0x800, ioaddr + BCULR);	/* Burst sycle set */
 
-	ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR);
+	ctrl_outl(mdp->cd->fcftr_value, ioaddr + FCFTR);
 
-#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(0, ioaddr + TRIMD);
-#endif
+	if (!mdp->cd->no_trimd)
+		ctrl_outl(0, ioaddr + TRIMD);
 
 	/* Recv frame limit set register */
 	ctrl_outl(RFLR_VALUE, ioaddr + RFLR);
 
 	ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR);
-	ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR);
+	ctrl_outl(mdp->cd->eesipr_value, ioaddr + EESIPR);
 
 	/* PAUSE Prohibition */
 	val = (ctrl_inl(ioaddr + ECMR) & ECMR_DM) |
@@ -439,24 +607,25 @@ static int sh_eth_dev_init(struct net_device *ndev)
 
 	ctrl_outl(val, ioaddr + ECMR);
 
+	if (mdp->cd->set_rate)
+		mdp->cd->set_rate(ndev);
+
 	/* E-MAC Status Register clear */
-	ctrl_outl(ECSR_INIT, ioaddr + ECSR);
+	ctrl_outl(mdp->cd->ecsr_value, ioaddr + ECSR);
 
 	/* E-MAC Interrupt Enable register */
-	ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR);
+	ctrl_outl(mdp->cd->ecsipr_value, ioaddr + ECSIPR);
 
 	/* Set MAC address */
 	update_mac_address(ndev);
 
 	/* mask reset */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(APR_AP, ioaddr + APR);
-	ctrl_outl(MPR_MP, ioaddr + MPR);
-	ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-	ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR);
-#endif
+	if (mdp->cd->apr)
+		ctrl_outl(APR_AP, ioaddr + APR);
+	if (mdp->cd->mpr)
+		ctrl_outl(MPR_MP, ioaddr + MPR);
+	if (mdp->cd->tpauser)
+		ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
 
 	/* Setting the Rx mode will start the Rx process. */
 	ctrl_outl(EDRRR_R, ioaddr + EDRRR);
@@ -505,7 +674,7 @@ static int sh_eth_rx(struct net_device *ndev)
 	int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx;
 	struct sk_buff *skb;
 	u16 pkt_len = 0;
-	u32 desc_status, reserve = 0;
+	u32 desc_status;
 
 	rxdesc = &mdp->rx_ring[entry];
 	while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
@@ -534,7 +703,10 @@ static int sh_eth_rx(struct net_device *ndev)
 			if (desc_status & RD_RFS10)
 				mdp->stats.rx_over_errors++;
 		} else {
-			swaps((char *)(rxdesc->addr & ~0x3), pkt_len + 2);
+			if (!mdp->cd->hw_swap)
+				sh_eth_soft_swap(
+					phys_to_virt(ALIGN(rxdesc->addr, 4)),
+					pkt_len + 2);
 			skb = mdp->rx_skbuff[entry];
 			mdp->rx_skbuff[entry] = NULL;
 			skb_put(skb, pkt_len);
@@ -545,6 +717,7 @@ static int sh_eth_rx(struct net_device *ndev)
 		}
 		rxdesc->status |= cpu_to_edmac(mdp, RD_RACT);
 		entry = (++mdp->cur_rx) % RX_RING_SIZE;
+		rxdesc = &mdp->rx_ring[entry];
 	}
 
 	/* Refill the Rx ring buffers. */
@@ -552,24 +725,20 @@ static int sh_eth_rx(struct net_device *ndev)
 		entry = mdp->dirty_rx % RX_RING_SIZE;
 		rxdesc = &mdp->rx_ring[entry];
 		/* The size of the buffer is 16 byte boundary. */
-		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+		rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
 
 		if (mdp->rx_skbuff[entry] == NULL) {
 			skb = dev_alloc_skb(mdp->rx_buf_sz);
 			mdp->rx_skbuff[entry] = skb;
 			if (skb == NULL)
 				break;	/* Better luck next round. */
+			dma_map_single(&ndev->dev, skb->tail, mdp->rx_buf_sz,
+					DMA_FROM_DEVICE);
 			skb->dev = ndev;
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			reserve = SH7763_SKB_ALIGN
-				- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
-			if (reserve)
-				skb_reserve(skb, reserve);
-#else
-			skb_reserve(skb, RX_OFFSET);
-#endif
+			sh_eth_set_receive_align(skb);
+
 			skb->ip_summed = CHECKSUM_NONE;
-			rxdesc->addr = (u32)skb->data & ~0x3UL;
+			rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
 		}
 		if (entry >= RX_RING_SIZE - 1)
 			rxdesc->status |=
@@ -593,6 +762,8 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	u32 ioaddr = ndev->base_addr;
 	u32 felic_stat;
+	u32 link_stat;
+	u32 mask;
 
 	if (intr_status & EESR_ECI) {
 		felic_stat = ctrl_inl(ioaddr + ECSR);
@@ -601,7 +772,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 			mdp->stats.tx_carrier_errors++;
 		if (felic_stat & ECSR_LCHNG) {
 			/* Link Changed */
-			u32 link_stat = (ctrl_inl(ioaddr + PSR));
+			if (mdp->cd->no_psr) {
+				if (mdp->link == PHY_DOWN)
+					link_stat = 0;
+				else
+					link_stat = PHY_ST_LINK;
+			} else {
+				link_stat = (ctrl_inl(ioaddr + PSR));
+			}
 			if (!(link_stat & PHY_ST_LINK)) {
 				/* Link Down : disable tx and rx */
 				ctrl_outl(ctrl_inl(ioaddr + ECMR) &
@@ -633,17 +811,15 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		if (intr_status & EESR_RFRMER) {
 			/* Receive Frame Overflow int */
 			mdp->stats.rx_frame_errors++;
-			printk(KERN_ERR "Receive Frame Overflow\n");
+			dev_err(&ndev->dev, "Receive Frame Overflow\n");
 		}
 	}
-#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
-	if (intr_status & EESR_ADE) {
-		if (intr_status & EESR_TDE) {
-			if (intr_status & EESR_TFE)
-				mdp->stats.tx_fifo_errors++;
-		}
+
+	if (!mdp->cd->no_ade) {
+		if (intr_status & EESR_ADE && intr_status & EESR_TDE &&
+		    intr_status & EESR_TFE)
+			mdp->stats.tx_fifo_errors++;
 	}
-#endif
 
 	if (intr_status & EESR_RDE) {
 		/* Receive Descriptor Empty int */
@@ -651,24 +827,24 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 
 		if (ctrl_inl(ioaddr + EDRRR) ^ EDRRR_R)
 			ctrl_outl(EDRRR_R, ioaddr + EDRRR);
-		printk(KERN_ERR "Receive Descriptor Empty\n");
+		dev_err(&ndev->dev, "Receive Descriptor Empty\n");
 	}
 	if (intr_status & EESR_RFE) {
 		/* Receive FIFO Overflow int */
 		mdp->stats.rx_fifo_errors++;
-		printk(KERN_ERR "Receive FIFO Overflow\n");
+		dev_err(&ndev->dev, "Receive FIFO Overflow\n");
 	}
-	if (intr_status & (EESR_TWB | EESR_TABT |
-#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
-			EESR_ADE |
-#endif
-			EESR_TDE | EESR_TFE)) {
+
+	mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
+	if (mdp->cd->no_ade)
+		mask &= ~EESR_ADE;
+	if (intr_status & mask) {
 		/* Tx error */
 		u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR);
 		/* dmesg */
-		printk(KERN_ERR "%s:TX error. status=%8.8x cur_tx=%8.8x ",
-				ndev->name, intr_status, mdp->cur_tx);
-		printk(KERN_ERR "dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
+		dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x ",
+				intr_status, mdp->cur_tx);
+		dev_err(&ndev->dev, "dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
 				mdp->dirty_tx, (u32) ndev->state, edtrr);
 		/* dirty buffer free */
 		sh_eth_txfree(ndev);
@@ -687,6 +863,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 {
 	struct net_device *ndev = netdev;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
+	struct sh_eth_cpu_data *cd = mdp->cd;
 	irqreturn_t ret = IRQ_NONE;
 	u32 ioaddr, boguscnt = RX_RING_SIZE;
 	u32 intr_status = 0;
@@ -699,7 +876,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	/* Clear interrupt */
 	if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
 			EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
-			TX_CHECK | EESR_ERR_CHECK)) {
+			cd->tx_check | cd->eesr_err_check)) {
 		ctrl_outl(intr_status, ioaddr + EESR);
 		ret = IRQ_HANDLED;
 	} else
@@ -716,12 +893,12 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	}
 
 	/* Tx Check */
-	if (intr_status & TX_CHECK) {
+	if (intr_status & cd->tx_check) {
 		sh_eth_txfree(ndev);
 		netif_wake_queue(ndev);
 	}
 
-	if (intr_status & EESR_ERR_CHECK)
+	if (intr_status & cd->eesr_err_check)
 		sh_eth_error(ndev, intr_status);
 
 	if (--boguscnt < 0) {
@@ -756,32 +933,15 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 		if (phydev->duplex != mdp->duplex) {
 			new_state = 1;
 			mdp->duplex = phydev->duplex;
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			if (mdp->duplex) { /*  FULL */
-				ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM,
-						ioaddr + ECMR);
-			} else {	/* Half */
-				ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM,
-						ioaddr + ECMR);
-			}
-#endif
+			if (mdp->cd->set_duplex)
+				mdp->cd->set_duplex(ndev);
 		}
 
 		if (phydev->speed != mdp->speed) {
 			new_state = 1;
 			mdp->speed = phydev->speed;
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			switch (mdp->speed) {
-			case 10: /* 10BASE */
-				ctrl_outl(GECMR_10, ioaddr + GECMR); break;
-			case 100:/* 100BASE */
-				ctrl_outl(GECMR_100, ioaddr + GECMR); break;
-			case 1000: /* 1000BASE */
-				ctrl_outl(GECMR_1000, ioaddr + GECMR); break;
-			default:
-				break;
-			}
-#endif
+			if (mdp->cd->set_rate)
+				mdp->cd->set_rate(ndev);
 		}
 		if (mdp->link == PHY_DOWN) {
 			ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
@@ -804,7 +964,7 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 static int sh_eth_phy_init(struct net_device *ndev)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
-	char phy_id[BUS_ID_SIZE];
+	char phy_id[MII_BUS_ID_SIZE + 3];
 	struct phy_device *phydev = NULL;
 
 	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
@@ -821,8 +981,9 @@ static int sh_eth_phy_init(struct net_device *ndev)
 		dev_err(&ndev->dev, "phy_connect failed\n");
 		return PTR_ERR(phydev);
 	}
+
 	dev_info(&ndev->dev, "attached phy %i to driver %s\n",
-	phydev->addr, phydev->drv->name);
+		phydev->addr, phydev->drv->name);
 
 	mdp->phydev = phydev;
 
@@ -860,7 +1021,7 @@ static int sh_eth_open(struct net_device *ndev)
 #endif
 				ndev->name, ndev);
 	if (ret) {
-		printk(KERN_ERR "Can not assign IRQ number to %s\n", CARDNAME);
+		dev_err(&ndev->dev, "Can not assign IRQ number\n");
 		return ret;
 	}
 
@@ -947,7 +1108,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		if (!sh_eth_txfree(ndev)) {
 			netif_stop_queue(ndev);
 			spin_unlock_irqrestore(&mdp->lock, flags);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 	spin_unlock_irqrestore(&mdp->lock, flags);
@@ -955,9 +1116,11 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	entry = mdp->cur_tx % TX_RING_SIZE;
 	mdp->tx_skbuff[entry] = skb;
 	txdesc = &mdp->tx_ring[entry];
-	txdesc->addr = (u32)(skb->data);
+	txdesc->addr = virt_to_phys(skb->data);
 	/* soft swap. */
-	swaps((char *)(txdesc->addr & ~0x3), skb->len + 2);
+	if (!mdp->cd->hw_swap)
+		sh_eth_soft_swap(phys_to_virt(ALIGN(txdesc->addr, 4)),
+				 skb->len + 2);
 	/* write back */
 	__flush_purge_region(skb->data, skb->len);
 	if (skb->len < ETHERSMALL)
@@ -1059,7 +1222,7 @@ static int sh_eth_do_ioctl(struct net_device *ndev, struct ifreq *rq,
 	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
 }
 
-
+#if defined(SH_ETH_HAS_TSU)
 /* Multicast reception directions set */
 static void sh_eth_set_multicast_list(struct net_device *ndev)
 {
@@ -1104,6 +1267,7 @@ static void sh_eth_tsu_init(u32 ioaddr)
 	ctrl_outl(0, ioaddr + TSU_POST3);	/* Disable CAM entry [16-23] */
 	ctrl_outl(0, ioaddr + TSU_POST4);	/* Disable CAM entry [24-31] */
 }
+#endif /* SH_ETH_HAS_TSU */
 
 /* MDIO bus release function */
 static int sh_mdio_release(struct net_device *ndev)
@@ -1193,7 +1357,9 @@ static const struct net_device_ops sh_eth_netdev_ops = {
 	.ndo_stop		= sh_eth_close,
 	.ndo_start_xmit		= sh_eth_start_xmit,
 	.ndo_get_stats		= sh_eth_get_stats,
+#if defined(SH_ETH_HAS_TSU)
 	.ndo_set_multicast_list	= sh_eth_set_multicast_list,
+#endif
 	.ndo_tx_timeout		= sh_eth_tx_timeout,
 	.ndo_do_ioctl		= sh_eth_do_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -1219,7 +1385,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	ndev = alloc_etherdev(sizeof(struct sh_eth_private));
 	if (!ndev) {
-		printk(KERN_ERR "%s: could not allocate device.\n", CARDNAME);
+		dev_err(&pdev->dev, "Could not allocate device.\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -1252,6 +1418,10 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	/* EDMAC endian */
 	mdp->edmac_endian = pd->edmac_endian;
 
+	/* set cpu data */
+	mdp->cd = &sh_eth_my_cpu_data;
+	sh_eth_set_default_cpu_data(mdp->cd);
+
 	/* set function */
 	ndev->netdev_ops = &sh_eth_netdev_ops;
 	ndev->watchdog_timeo = TX_TIMEOUT;
@@ -1264,13 +1434,10 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	/* First device only init */
 	if (!devno) {
-#if defined(ARSTR)
-		/* reset device */
-		ctrl_outl(ARSTR_ARSTR, ARSTR);
-		mdelay(1);
-#endif
+		if (mdp->cd->chip_reset)
+			mdp->cd->chip_reset(ndev);
 
-#if defined(SH_TSU_ADDR)
+#if defined(SH_ETH_HAS_TSU)
 		/* TSU init (Init only)*/
 		sh_eth_tsu_init(SH_TSU_ADDR);
 #endif
@@ -1287,8 +1454,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 		goto out_unregister;
 
 	/* pritnt device infomation */
-	printk(KERN_INFO "%s: %s at 0x%x, ",
-	       ndev->name, CARDNAME, (u32) ndev->base_addr);
+	pr_info("Base address at 0x%x, ",
+	       (u32)ndev->base_addr);
 
 	for (i = 0; i < 5; i++)
 		printk("%02X:", ndev->dev_addr[i]);
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 1537e13e623..9afe5b4c855 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -2,7 +2,7 @@
  *  SuperH Ethernet device driver
  *
  *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
- *  Copyright (C) 2008 Renesas Solutions Corp.
+ *  Copyright (C) 2008-2009 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -39,12 +39,12 @@
 #define ETHERSMALL		60
 #define PKT_BUF_SZ		1538
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+/* This CPU register maps is very difference by other SH4 CPU */
 
-#define SH7763_SKB_ALIGN 32
 /* Chip Base Address */
 # define SH_TSU_ADDR	0xFEE01800
-# define ARSTR			SH_TSU_ADDR
+# define ARSTR		SH_TSU_ADDR
 
 /* Chip Registers */
 /* E-DMAC */
@@ -143,8 +143,60 @@
 # define FWNLCR1         0xB0
 # define FWALCR1         0x40
 
-#else /* CONFIG_CPU_SUBTYPE_SH7763 */
-# define RX_OFFSET 2	/* skb offset */
+#elif defined(CONFIG_CPU_SH4)	/* #if defined(CONFIG_CPU_SUBTYPE_SH7763) */
+/* EtherC */
+#define ECMR		0x100
+#define RFLR		0x108
+#define ECSR		0x110
+#define ECSIPR		0x118
+#define PIR		0x120
+#define PSR		0x128
+#define RDMLR		0x140
+#define IPGR		0x150
+#define APR		0x154
+#define MPR		0x158
+#define TPAUSER		0x164
+#define RFCF		0x160
+#define TPAUSECR	0x168
+#define BCFRR		0x16c
+#define MAHR		0x1c0
+#define MALR		0x1c8
+#define TROCR		0x1d0
+#define CDCR		0x1d4
+#define LCCR		0x1d8
+#define CNDCR		0x1dc
+#define CEFCR		0x1e4
+#define FRECR		0x1e8
+#define TSFRCR		0x1ec
+#define TLFRCR		0x1f0
+#define RFCR		0x1f4
+#define MAFCR		0x1f8
+#define RTRATE		0x1fc
+
+/* E-DMAC */
+#define EDMR		0x000
+#define EDTRR		0x008
+#define EDRRR		0x010
+#define TDLAR		0x018
+#define RDLAR		0x020
+#define EESR		0x028
+#define EESIPR		0x030
+#define TRSCER		0x038
+#define RMFCR		0x040
+#define TFTR		0x048
+#define FDR		0x050
+#define RMCR		0x058
+#define TFUCR		0x064
+#define RFOCR		0x068
+#define FCFTR		0x070
+#define RPADIR		0x078
+#define TRIMD		0x07c
+#define RBWAR		0x0c8
+#define RDFAR		0x0cc
+#define TBRAR		0x0d4
+#define TDFAR		0x0d8
+#else /* #elif defined(CONFIG_CPU_SH4) */
+/* This section is SH3 or SH2 */
 #ifndef CONFIG_CPU_SUBTYPE_SH7619
 /* Chip base address */
 # define SH_TSU_ADDR  0xA7000804
@@ -243,6 +295,30 @@
 
 #endif /* CONFIG_CPU_SUBTYPE_SH7763 */
 
+/* There are avoid compile error... */
+#if !defined(BCULR)
+#define BCULR	0x0fc
+#endif
+#if !defined(TRIMD)
+#define TRIMD	0x0fc
+#endif
+#if !defined(APR)
+#define APR	0x0fc
+#endif
+#if !defined(MPR)
+#define MPR	0x0fc
+#endif
+#if !defined(TPAUSER)
+#define TPAUSER	0x0fc
+#endif
+
+/* Driver's parameters */
+#if defined(CONFIG_CPU_SH4)
+#define SH4_SKB_RX_ALIGN	32
+#else
+#define SH2_SH3_SKB_RX_ALIGN	2
+#endif
+
 /*
  * Register's bits
  */
@@ -261,11 +337,10 @@ enum GECMR_BIT {
 
 /* EDMR */
 enum DMAC_M_BIT {
+	EDMR_EL = 0x40, /* Litte endian */
 	EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
 #ifdef CONFIG_CPU_SUBTYPE_SH7763
-	EDMR_SRST	= 0x03,
-	EMDR_DESC_R	= 0x30, /* Descriptor reserve size */
-	EDMR_EL		= 0x40, /* Litte endian */
+	EDMR_SRST = 0x03,
 #else /* CONFIG_CPU_SUBTYPE_SH7763 */
 	EDMR_SRST = 0x01,
 #endif
@@ -307,47 +382,43 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
 
 /* EESR */
 enum EESR_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
-	EESR_TWB  = 0x40000000,
-#else
-	EESR_TWB  = 0xC0000000,
-	EESR_TC1  = 0x20000000,
-	EESR_TUC  = 0x10000000,
-	EESR_ROC  = 0x80000000,
-#endif
-	EESR_TABT = 0x04000000,
-	EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
-	EESR_ADE  = 0x00800000,
-#endif
-	EESR_ECI  = 0x00400000,
-	EESR_FTC  = 0x00200000, EESR_TDE  = 0x00100000,
-	EESR_TFE  = 0x00080000, EESR_FRC  = 0x00040000,
-	EESR_RDE  = 0x00020000, EESR_RFE  = 0x00010000,
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
-	EESR_CND  = 0x00000800,
-#endif
-	EESR_DLC  = 0x00000400,
-	EESR_CD   = 0x00000200, EESR_RTO  = 0x00000100,
-	EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040,
-	EESR_CELF = 0x00000020, EESR_RRF  = 0x00000010,
-	EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004,
-	EESR_PRE  = 0x00000002, EESR_CERF = 0x00000001,
-};
-
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define TX_CHECK (EESR_TC1 | EESR_FTC)
-# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
-		| EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
-# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE)
-
-#else
-# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO)
-# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
-		| EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI)
-# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)
-#endif
+	EESR_TWB1	= 0x80000000,
+	EESR_TWB	= 0x40000000,	/* same as TWB0 */
+	EESR_TC1	= 0x20000000,
+	EESR_TUC	= 0x10000000,
+	EESR_ROC	= 0x08000000,
+	EESR_TABT	= 0x04000000,
+	EESR_RABT	= 0x02000000,
+	EESR_RFRMER	= 0x01000000,	/* same as RFCOF */
+	EESR_ADE	= 0x00800000,
+	EESR_ECI	= 0x00400000,
+	EESR_FTC	= 0x00200000,	/* same as TC or TC0 */
+	EESR_TDE	= 0x00100000,
+	EESR_TFE	= 0x00080000,	/* same as TFUF */
+	EESR_FRC	= 0x00040000,	/* same as FR */
+	EESR_RDE	= 0x00020000,
+	EESR_RFE	= 0x00010000,
+	EESR_CND	= 0x00000800,
+	EESR_DLC	= 0x00000400,
+	EESR_CD		= 0x00000200,
+	EESR_RTO	= 0x00000100,
+	EESR_RMAF	= 0x00000080,
+	EESR_CEEF	= 0x00000040,
+	EESR_CELF	= 0x00000020,
+	EESR_RRF	= 0x00000010,
+	EESR_RTLF	= 0x00000008,
+	EESR_RTSF	= 0x00000004,
+	EESR_PRE	= 0x00000002,
+	EESR_CERF	= 0x00000001,
+};
+
+#define DEFAULT_TX_CHECK	(EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | \
+				 EESR_RTO)
+#define DEFAULT_EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | \
+				 EESR_RDE | EESR_RFRMER | EESR_ADE | \
+				 EESR_TFE | EESR_TDE | EESR_ECI)
+#define DEFAULT_TX_ERROR_CHECK	(EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | \
+				 EESR_TFE)
 
 /* EESIPR */
 enum DMAC_IM_BIT {
@@ -386,12 +457,8 @@ enum FCFTR_BIT {
 	FCFTR_RFF0 = 0x00010000, FCFTR_RFD2 = 0x00000004,
 	FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001,
 };
-#define FIFO_F_D_RFF	(FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0)
-#ifndef CONFIG_CPU_SUBTYPE_SH7619
-#define FIFO_F_D_RFD	(FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0)
-#else
-#define FIFO_F_D_RFD	(FCFTR_RFD0)
-#endif
+#define DEFAULT_FIFO_F_D_RFF	(FCFTR_RFF2 | FCFTR_RFF1 | FCFTR_RFF0)
+#define DEFAULT_FIFO_F_D_RFD	(FCFTR_RFD2 | FCFTR_RFD1 | FCFTR_RFD0)
 
 /* Transfer descriptor bit */
 enum TD_STS_BIT {
@@ -404,60 +471,38 @@ enum TD_STS_BIT {
 #define TD_TFP	(TD_TFP1|TD_TFP0)
 
 /* RMCR */
-enum RECV_RST_BIT { RMCR_RST = 0x01, };
+#define DEFAULT_RMCR_VALUE	0x00000000
+
 /* ECMR */
 enum FELIC_MODE_BIT {
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
 	ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000,
 	ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000,
-#endif
 	ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
 	ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
 	ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
-	ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004, ECMR_DM = 0x00000002,
-	ECMR_PRM = 0x00000001,
+	ECMR_RTM = 0x00000010, ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004,
+	ECMR_DM = 0x00000002, ECMR_PRM = 0x00000001,
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-#define ECMR_CHG_DM	(ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\
-			ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
-#elif CONFIG_CPU_SUBTYPE_SH7619
-#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
-#else
-#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
-#endif
-
 /* ECSR */
 enum ECSR_STATUS_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
 	ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
-#endif
 	ECSR_LCHNG = 0x04,
 	ECSR_MPD = 0x02, ECSR_ICD = 0x01,
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
-#else
-# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
-			ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP)
-#endif
+#define DEFAULT_ECSR_INIT	(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | \
+				 ECSR_ICD | ECSIPR_MPDIP)
 
 /* ECSIPR */
 enum ECSIPR_STATUS_MASK_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
 	ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
-#endif
 	ECSIPR_LCHNGIP = 0x04,
 	ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
-#else
-# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
-				ECSIPR_ICDIP | ECSIPR_MPDIP)
-#endif
+#define DEFAULT_ECSIPR_INIT	(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | \
+				 ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
 
 /* APR */
 enum APR_BIT {
@@ -483,23 +528,12 @@ enum RPADIR_BIT {
 	RPADIR_PADR = 0x0003f,
 };
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-# define RPADIR_INIT (0x00)
-#else
-# define RPADIR_INIT (RPADIR_PADS1)
-#endif
-
 /* RFLR */
 #define RFLR_VALUE 0x1000
 
 /* FDR */
-enum FIFO_SIZE_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7619
-	FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
-#else
-	FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001,
-#endif
-};
+#define DEFAULT_FDR_INIT	0x00000707
+
 enum phy_offsets {
 	PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
 	PHY_ANA = 4, PHY_ANL = 5, PHY_ANE = 6,
@@ -633,7 +667,43 @@ struct sh_eth_rxdesc {
 	u32 pad0;		/* padding data */
 } __attribute__((aligned(2), packed));
 
+/* This structure is used by each CPU dependency handling. */
+struct sh_eth_cpu_data {
+	/* optional functions */
+	void (*chip_reset)(struct net_device *ndev);
+	void (*set_duplex)(struct net_device *ndev);
+	void (*set_rate)(struct net_device *ndev);
+
+	/* mandatory initialize value */
+	unsigned long eesipr_value;
+
+	/* optional initialize value */
+	unsigned long ecsr_value;
+	unsigned long ecsipr_value;
+	unsigned long fdr_value;
+	unsigned long fcftr_value;
+	unsigned long rpadir_value;
+	unsigned long rmcr_value;
+
+	/* interrupt checking mask */
+	unsigned long tx_check;
+	unsigned long eesr_err_check;
+	unsigned long tx_error_check;
+
+	/* hardware features */
+	unsigned no_psr:1;		/* EtherC DO NOT have PSR */
+	unsigned apr:1;			/* EtherC have APR */
+	unsigned mpr:1;			/* EtherC have MPR */
+	unsigned tpauser:1;		/* EtherC have TPAUSER */
+	unsigned bculr:1;		/* EtherC have BCULR */
+	unsigned hw_swap:1;		/* E-DMAC have DE bit in EDMR */
+	unsigned rpadir:1;		/* E-DMAC have RPADIR */
+	unsigned no_trimd:1;		/* E-DMAC DO NOT have TRIMD */
+	unsigned no_ade:1;	/* E-DMAC DO NOT have ADE bit in EESR */
+};
+
 struct sh_eth_private {
+	struct sh_eth_cpu_data *cd;
 	dma_addr_t rx_desc_dma;
 	dma_addr_t tx_desc_dma;
 	struct sh_eth_rxdesc *rx_ring;
@@ -661,11 +731,7 @@ struct sh_eth_private {
 	struct net_device_stats tsu_stats;	/* TSU forward status */
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-/* SH7763 has endian control register */
-#define swaps(x, y)
-#else
-static void swaps(char *src, int len)
+static inline void sh_eth_soft_swap(char *src, int len)
 {
 #ifdef __LITTLE_ENDIAN__
 	u32 *p = (u32 *)src;
@@ -676,5 +742,5 @@ static void swaps(char *src, int len)
 		*p = swab32(*p);
 #endif
 }
-#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
-#endif
+
+#endif	/* #ifndef __SH_ETH_H__ */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 55ccd51d247..e2247669a49 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -47,7 +47,7 @@
 #define PHY_ID_ANY		0x1f
 #define MII_REG_ANY		0x1f
 
-#define DRV_VERSION		"1.2"
+#define DRV_VERSION		"1.3"
 #define DRV_NAME		"sis190"
 #define SIS190_DRIVER_NAME	DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
 #define PFX DRV_NAME ": "
@@ -317,6 +317,7 @@ static struct mii_chip_info {
         unsigned int type;
 	u32 feature;
 } mii_chip_table[] = {
+	{ "Atheros PHY",          { 0x004d, 0xd010 }, LAN, 0 },
 	{ "Atheros PHY AR8012",   { 0x004d, 0xd020 }, LAN, 0 },
 	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 },
 	{ "Broadcom PHY AC131",   { 0x0143, 0xbc70 }, LAN, 0 },
@@ -347,7 +348,7 @@ static struct {
 	u32 msg_enable;
 } debug = { -1 };
 
-MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver");
+MODULE_DESCRIPTION("SiS sis190/191 Gigabit Ethernet driver");
 module_param(rx_copybreak, int, 0);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 module_param_named(debug, debug.msg_enable, int, 0);
@@ -539,8 +540,8 @@ static bool sis190_try_rx_copy(struct sis190_private *tp,
 	if (!skb)
 		goto out;
 
-	pci_dma_sync_single_for_device(tp->pci_dev, addr, pkt_size,
-				       PCI_DMA_FROMDEVICE);
+	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz,
+				PCI_DMA_FROMDEVICE);
 	skb_reserve(skb, 2);
 	skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
 	*sk_buff = skb;
@@ -942,9 +943,9 @@ static void sis190_phy_task(struct work_struct *work)
 			u32 ctl;
 			const char *msg;
 		} reg31[] = {
-			{ LPA_1000XFULL | LPA_SLCT, 0x07000c00 | 0x00001000,
+			{ LPA_1000FULL, 0x07000c00 | 0x00001000,
 				"1000 Mbps Full Duplex" },
-			{ LPA_1000XHALF | LPA_SLCT, 0x07000c00,
+			{ LPA_1000HALF, 0x07000c00,
 				"1000 Mbps Half Duplex" },
 			{ LPA_100FULL, 0x04000800 | 0x00001000,
 				"100 Mbps Full Duplex" },
@@ -955,22 +956,35 @@ static void sis190_phy_task(struct work_struct *work)
 			{ LPA_10HALF, 0x04000400,
 				"10 Mbps Half Duplex" },
 			{ 0, 0x04000400, "unknown" }
- 		}, *p;
-		u16 adv;
+		}, *p = NULL;
+		u16 adv, autoexp, gigadv, gigrec;
 
 		val = mdio_read(ioaddr, phy_id, 0x1f);
 		net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
 
 		val = mdio_read(ioaddr, phy_id, MII_LPA);
 		adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
-		net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n",
-			 dev->name, val, adv);
-
-		val &= adv;
+		autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION);
+		net_link(tp, KERN_INFO "%s: mii lpa=%04x adv=%04x exp=%04x.\n",
+			 dev->name, val, adv, autoexp);
+
+		if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) {
+			/* check for gigabit speed */
+			gigadv = mdio_read(ioaddr, phy_id, MII_CTRL1000);
+			gigrec = mdio_read(ioaddr, phy_id, MII_STAT1000);
+			val = (gigadv & (gigrec >> 2));
+			if (val & ADVERTISE_1000FULL)
+				p = reg31;
+			else if (val & ADVERTISE_1000HALF)
+				p = reg31 + 1;
+		}
+		if (!p) {
+			val &= adv;
 
-		for (p = reg31; p->val; p++) {
-			if ((val & p->val) == p->val)
-				break;
+			for (p = reg31; p->val; p++) {
+				if ((val & p->val) == p->val)
+					break;
+			}
 		}
 
 		p->ctl |= SIS_R32(StationControl) & ~0x0f001c00;
@@ -1204,8 +1218,6 @@ static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb);
 
-	dev->trans_start = jiffies;
-
 	dirty_tx = tp->dirty_tx;
 	if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) {
 		netif_stop_queue(dev);
@@ -1315,12 +1327,15 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
 			((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
 				LAN : HOME) : p->type;
 		tp->features |= p->feature;
-	} else
+		net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
+			pci_name(tp->pci_dev), p->name, phy_id);
+	} else {
 		phy->type = UNKNOWN;
-
-	net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
-		  pci_name(tp->pci_dev),
-		  (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id);
+		net_probe(tp, KERN_INFO
+			"%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
+			pci_name(tp->pci_dev),
+			phy->id[0], (phy->id[1] & 0xfff0), phy_id);
+	}
 }
 
 static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp)
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 2d4617b3e20..a9a897bb42d 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1584,7 +1584,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 	/* Don't transmit data before the complete of auto-negotiation */
 	if(!sis_priv->autong_complete){
 		netif_stop_queue(net_dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irqsave(&sis_priv->lock, flags);
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff589988d1..2976757a36f 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
 #define SMT_RDF_SUCCESS	0x00000003	/* success (PMF) */
 #define SMT_RDF_BADSET	0x00000004	/* bad set count (PMF) */
 #define SMT_RDF_ILLEGAL 0x00000005	/* read only (PMF) */
-#define SMT_RDF_NOPARAM	0x6		/* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM	0x6		/* parameter not supported (PMF) */
 #define SMT_RDF_RANGE	0x8		/* out of range */
 #define SMT_RDF_AUTHOR	0x9		/* not autohorized */
 #define SMT_RDF_LENGTH	0x0a		/* length error */
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index e14aec0a733..088fe26484e 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -159,12 +159,6 @@ MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
 
 static int num_boards;	/* total number of adapters configured */
 
-#ifdef DRIVERDEBUG
-#define PRINTK(s, args...) printk(s, ## args)
-#else
-#define PRINTK(s, args...)
-#endif				// DRIVERDEBUG
-
 static const struct net_device_ops skfp_netdev_ops = {
 	.ndo_open		= skfp_open,
 	.ndo_stop		= skfp_close,
@@ -213,7 +207,7 @@ static int skfp_init_one(struct pci_dev *pdev,
 	void __iomem *mem;
 	int err;
 
-	PRINTK(KERN_INFO "entering skfp_init_one\n");
+	pr_debug(KERN_INFO "entering skfp_init_one\n");
 
 	if (num_boards == 0) 
 		printk("%s\n", boot_msg);
@@ -389,7 +383,7 @@ static  int skfp_driver_init(struct net_device *dev)
 	skfddi_priv *bp = &smc->os;
 	int err = -EIO;
 
-	PRINTK(KERN_INFO "entering skfp_driver_init\n");
+	pr_debug(KERN_INFO "entering skfp_driver_init\n");
 
 	// set the io address in private structures
 	bp->base_addr = dev->base_addr;
@@ -409,7 +403,7 @@ static  int skfp_driver_init(struct net_device *dev)
 
 	// Determine the required size of the 'shared' memory area.
 	bp->SharedMemSize = mac_drv_check_space();
-	PRINTK(KERN_INFO "Memory for HWM: %ld\n", bp->SharedMemSize);
+	pr_debug(KERN_INFO "Memory for HWM: %ld\n", bp->SharedMemSize);
 	if (bp->SharedMemSize > 0) {
 		bp->SharedMemSize += 16;	// for descriptor alignment
 
@@ -433,13 +427,13 @@ static  int skfp_driver_init(struct net_device *dev)
 
 	card_stop(smc);		// Reset adapter.
 
-	PRINTK(KERN_INFO "mac_drv_init()..\n");
+	pr_debug(KERN_INFO "mac_drv_init()..\n");
 	if (mac_drv_init(smc) != 0) {
-		PRINTK(KERN_INFO "mac_drv_init() failed.\n");
+		pr_debug(KERN_INFO "mac_drv_init() failed.\n");
 		goto fail;
 	}
 	read_address(smc, NULL);
-	PRINTK(KERN_INFO "HW-Addr: %02x %02x %02x %02x %02x %02x\n",
+	pr_debug(KERN_INFO "HW-Addr: %02x %02x %02x %02x %02x %02x\n",
 	       smc->hw.fddi_canon_addr.a[0],
 	       smc->hw.fddi_canon_addr.a[1],
 	       smc->hw.fddi_canon_addr.a[2],
@@ -495,7 +489,7 @@ static int skfp_open(struct net_device *dev)
 	struct s_smc *smc = netdev_priv(dev);
 	int err;
 
-	PRINTK(KERN_INFO "entering skfp_open\n");
+	pr_debug(KERN_INFO "entering skfp_open\n");
 	/* Register IRQ - support shared interrupts by passing device ptr */
 	err = request_irq(dev->irq, skfp_interrupt, IRQF_SHARED,
 			  dev->name, dev);
@@ -868,12 +862,12 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 	/* Enable promiscuous mode, if necessary */
 	if (dev->flags & IFF_PROMISC) {
 		mac_drv_rx_mode(smc, RX_ENABLE_PROMISC);
-		PRINTK(KERN_INFO "PROMISCUOUS MODE ENABLED\n");
+		pr_debug(KERN_INFO "PROMISCUOUS MODE ENABLED\n");
 	}
 	/* Else, update multicast address table */
 	else {
 		mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
-		PRINTK(KERN_INFO "PROMISCUOUS MODE DISABLED\n");
+		pr_debug(KERN_INFO "PROMISCUOUS MODE DISABLED\n");
 
 		// Reset all MC addresses
 		mac_clear_multicast(smc);
@@ -881,7 +875,7 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 
 		if (dev->flags & IFF_ALLMULTI) {
 			mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
-			PRINTK(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
+			pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
 		} else if (dev->mc_count > 0) {
 			if (dev->mc_count <= FPMAX_MULTICAST) {
 				/* use exact filtering */
@@ -894,12 +888,12 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 							  (struct fddi_addr *)dmi->dmi_addr, 
 							  1);
 
-					PRINTK(KERN_INFO "ENABLE MC ADDRESS:");
-					PRINTK(" %02x %02x %02x ",
+					pr_debug(KERN_INFO "ENABLE MC ADDRESS:");
+					pr_debug(" %02x %02x %02x ",
 					       dmi->dmi_addr[0],
 					       dmi->dmi_addr[1],
 					       dmi->dmi_addr[2]);
-					PRINTK("%02x %02x %02x\n",
+					pr_debug("%02x %02x %02x\n",
 					       dmi->dmi_addr[3],
 					       dmi->dmi_addr[4],
 					       dmi->dmi_addr[5]);
@@ -909,11 +903,11 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 			} else {	// more MC addresses than HW supports
 
 				mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
-				PRINTK(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
+				pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
 			}
 		} else {	// no MC addresses
 
-			PRINTK(KERN_INFO "DISABLE ALL MC ADDRESSES\n");
+			pr_debug(KERN_INFO "DISABLE ALL MC ADDRESSES\n");
 		}
 
 		/* Update adapter filters */
@@ -1067,7 +1061,7 @@ static int skfp_send_pkt(struct sk_buff *skb, struct net_device *dev)
 	struct s_smc *smc = netdev_priv(dev);
 	skfddi_priv *bp = &smc->os;
 
-	PRINTK(KERN_INFO "skfp_send_pkt\n");
+	pr_debug(KERN_INFO "skfp_send_pkt\n");
 
 	/*
 	 * Verify that incoming transmit request is OK
@@ -1088,7 +1082,7 @@ static int skfp_send_pkt(struct sk_buff *skb, struct net_device *dev)
 	if (bp->QueueSkb == 0) {	// return with tbusy set: queue full
 
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	bp->QueueSkb--;
 	skb_queue_tail(&bp->SendSkbQueue, skb);
@@ -1137,13 +1131,13 @@ static void send_queued_packets(struct s_smc *smc)
 
 	int frame_status;	// HWM tx frame status.
 
-	PRINTK(KERN_INFO "send queued packets\n");
+	pr_debug(KERN_INFO "send queued packets\n");
 	for (;;) {
 		// send first buffer from queue
 		skb = skb_dequeue(&bp->SendSkbQueue);
 
 		if (!skb) {
-			PRINTK(KERN_INFO "queue empty\n");
+			pr_debug(KERN_INFO "queue empty\n");
 			return;
 		}		// queue empty !
 
@@ -1174,11 +1168,11 @@ static void send_queued_packets(struct s_smc *smc)
 
 			if ((frame_status & RING_DOWN) != 0) {
 				// Ring is down.
-				PRINTK("Tx attempt while ring down.\n");
+				pr_debug("Tx attempt while ring down.\n");
 			} else if ((frame_status & OUT_OF_TXD) != 0) {
-				PRINTK("%s: out of TXDs.\n", bp->dev->name);
+				pr_debug("%s: out of TXDs.\n", bp->dev->name);
 			} else {
-				PRINTK("%s: out of transmit resources",
+				pr_debug("%s: out of transmit resources",
 					bp->dev->name);
 			}
 
@@ -1255,7 +1249,7 @@ static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr)
 static void ResetAdapter(struct s_smc *smc)
 {
 
-	PRINTK(KERN_INFO "[fddi: ResetAdapter]\n");
+	pr_debug(KERN_INFO "[fddi: ResetAdapter]\n");
 
 	// Stop the adapter.
 
@@ -1301,7 +1295,7 @@ void llc_restart_tx(struct s_smc *smc)
 {
 	skfddi_priv *bp = &smc->os;
 
-	PRINTK(KERN_INFO "[llc_restart_tx]\n");
+	pr_debug(KERN_INFO "[llc_restart_tx]\n");
 
 	// Try to send queued packets
 	spin_unlock(&bp->DriverLock);
@@ -1331,7 +1325,7 @@ void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
 {
 	void *virt;
 
-	PRINTK(KERN_INFO "mac_drv_get_space (%d bytes), ", size);
+	pr_debug(KERN_INFO "mac_drv_get_space (%d bytes), ", size);
 	virt = (void *) (smc->os.SharedMemAddr + smc->os.SharedMemHeap);
 
 	if ((smc->os.SharedMemHeap + size) > smc->os.SharedMemSize) {
@@ -1340,9 +1334,9 @@ void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
 	}
 	smc->os.SharedMemHeap += size;	// Move heap pointer.
 
-	PRINTK(KERN_INFO "mac_drv_get_space end\n");
-	PRINTK(KERN_INFO "virt addr: %lx\n", (ulong) virt);
-	PRINTK(KERN_INFO "bus  addr: %lx\n", (ulong)
+	pr_debug(KERN_INFO "mac_drv_get_space end\n");
+	pr_debug(KERN_INFO "virt addr: %lx\n", (ulong) virt);
+	pr_debug(KERN_INFO "bus  addr: %lx\n", (ulong)
 	       (smc->os.SharedMemDMA +
 		((char *) virt - (char *)smc->os.SharedMemAddr)));
 	return (virt);
@@ -1372,7 +1366,7 @@ void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
 
 	char *virt;
 
-	PRINTK(KERN_INFO "mac_drv_get_desc_mem\n");
+	pr_debug(KERN_INFO "mac_drv_get_desc_mem\n");
 
 	// Descriptor memory must be aligned on 16-byte boundary.
 
@@ -1381,8 +1375,8 @@ void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
 	size = (u_int) (16 - (((unsigned long) virt) & 15UL));
 	size = size % 16;
 
-	PRINTK("Allocate %u bytes alignment gap ", size);
-	PRINTK("for descriptor memory.\n");
+	pr_debug("Allocate %u bytes alignment gap ", size);
+	pr_debug("for descriptor memory.\n");
 
 	if (!mac_drv_get_space(smc, size)) {
 		printk("fddi: Unable to align descriptor memory.\n");
@@ -1516,11 +1510,11 @@ void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
 {
 	struct sk_buff *skb;
 
-	PRINTK(KERN_INFO "entering mac_drv_tx_complete\n");
+	pr_debug(KERN_INFO "entering mac_drv_tx_complete\n");
 	// Check if this TxD points to a skb
 
 	if (!(skb = txd->txd_os.skb)) {
-		PRINTK("TXD with no skb assigned.\n");
+		pr_debug("TXD with no skb assigned.\n");
 		return;
 	}
 	txd->txd_os.skb = NULL;
@@ -1536,7 +1530,7 @@ void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
 	// free the skb
 	dev_kfree_skb_irq(skb);
 
-	PRINTK(KERN_INFO "leaving mac_drv_tx_complete\n");
+	pr_debug(KERN_INFO "leaving mac_drv_tx_complete\n");
 }				// mac_drv_tx_complete
 
 
@@ -1603,7 +1597,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	unsigned short ri;
 	u_int RifLength;
 
-	PRINTK(KERN_INFO "entering mac_drv_rx_complete (len=%d)\n", len);
+	pr_debug(KERN_INFO "entering mac_drv_rx_complete (len=%d)\n", len);
 	if (frag_count != 1) {	// This is not allowed to happen.
 
 		printk("fddi: Multi-fragment receive!\n");
@@ -1612,7 +1606,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	}
 	skb = rxd->rxd_os.skb;
 	if (!skb) {
-		PRINTK(KERN_INFO "No skb in rxd\n");
+		pr_debug(KERN_INFO "No skb in rxd\n");
 		smc->os.MacStat.gen.rx_errors++;
 		goto RequeueRxd;
 	}
@@ -1642,7 +1636,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	else {
 		int n;
 // goos: RIF removal has still to be tested
-		PRINTK(KERN_INFO "RIF found\n");
+		pr_debug(KERN_INFO "RIF found\n");
 		// Get RIF length from Routing Control (RC) field.
 		cp = virt + FDDI_MAC_HDR_LEN;	// Point behind MAC header.
 
@@ -1687,7 +1681,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	return;
 
       RequeueRxd:
-	PRINTK(KERN_INFO "Rx: re-queue RXD.\n");
+	pr_debug(KERN_INFO "Rx: re-queue RXD.\n");
 	mac_drv_requeue_rxd(smc, rxd, frag_count);
 	smc->os.MacStat.gen.rx_errors++;	// Count receive packets
 						// not indicated.
@@ -1736,7 +1730,7 @@ void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 		skb = src_rxd->rxd_os.skb;
 		if (skb == NULL) {	// this should not happen
 
-			PRINTK("Requeue with no skb in rxd!\n");
+			pr_debug("Requeue with no skb in rxd!\n");
 			skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
 			if (skb) {
 				// we got a skb
@@ -1751,7 +1745,7 @@ void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 				rxd->rxd_os.dma_addr = b_addr;
 			} else {
 				// no skb available, use local buffer
-				PRINTK("Queueing invalid buffer!\n");
+				pr_debug("Queueing invalid buffer!\n");
 				rxd->rxd_os.skb = NULL;
 				v_addr = smc->os.LocalRxBuffer;
 				b_addr = smc->os.LocalRxBufferDMA;
@@ -1798,7 +1792,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 	struct sk_buff *skb;
 	volatile struct s_smt_fp_rxd *rxd;
 
-	PRINTK(KERN_INFO "entering mac_drv_fill_rxd\n");
+	pr_debug(KERN_INFO "entering mac_drv_fill_rxd\n");
 
 	// Walk through the list of free receive buffers, passing receive
 	// buffers to the HWM as long as RXDs are available.
@@ -1806,7 +1800,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 	MaxFrameSize = smc->os.MaxFrameSize;
 	// Check if there is any RXD left.
 	while (HWM_GET_RX_FREE(smc) > 0) {
-		PRINTK(KERN_INFO ".\n");
+		pr_debug(KERN_INFO ".\n");
 
 		rxd = HWM_GET_CURR_RXD(smc);
 		skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
@@ -1826,7 +1820,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 			// keep the receiver running in hope of better times.
 			// Multiple descriptors may point to this local buffer,
 			// so data in it must be considered invalid.
-			PRINTK("Queueing invalid buffer!\n");
+			pr_debug("Queueing invalid buffer!\n");
 			v_addr = smc->os.LocalRxBuffer;
 			b_addr = smc->os.LocalRxBufferDMA;
 		}
@@ -1837,7 +1831,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 		hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
 			    FIRST_FRAG | LAST_FRAG);
 	}
-	PRINTK(KERN_INFO "leaving mac_drv_fill_rxd\n");
+	pr_debug(KERN_INFO "leaving mac_drv_fill_rxd\n");
 }				// mac_drv_fill_rxd
 
 
@@ -1863,7 +1857,7 @@ void mac_drv_clear_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 
 	struct sk_buff *skb;
 
-	PRINTK("entering mac_drv_clear_rxd\n");
+	pr_debug("entering mac_drv_clear_rxd\n");
 
 	if (frag_count != 1)	// This is not allowed to happen.
 
@@ -1919,19 +1913,19 @@ int mac_drv_rx_init(struct s_smc *smc, int len, int fc,
 {
 	struct sk_buff *skb;
 
-	PRINTK("entering mac_drv_rx_init(len=%d)\n", len);
+	pr_debug("entering mac_drv_rx_init(len=%d)\n", len);
 
 	// "Received" a SMT or NSA frame of the local SMT.
 
 	if (len != la_len || len < FDDI_MAC_HDR_LEN || !look_ahead) {
-		PRINTK("fddi: Discard invalid local SMT frame\n");
-		PRINTK("  len=%d, la_len=%d, (ULONG) look_ahead=%08lXh.\n",
+		pr_debug("fddi: Discard invalid local SMT frame\n");
+		pr_debug("  len=%d, la_len=%d, (ULONG) look_ahead=%08lXh.\n",
 		       len, la_len, (unsigned long) look_ahead);
 		return (0);
 	}
 	skb = alloc_skb(len + 3, GFP_ATOMIC);
 	if (!skb) {
-		PRINTK("fddi: Local SMT: skb memory exhausted.\n");
+		pr_debug("fddi: Local SMT: skb memory exhausted.\n");
 		return (0);
 	}
 	skb_reserve(skb, 3);
@@ -1981,40 +1975,40 @@ void smt_timer_poll(struct s_smc *smc)
  ************************/
 void ring_status_indication(struct s_smc *smc, u_long status)
 {
-	PRINTK("ring_status_indication( ");
+	pr_debug("ring_status_indication( ");
 	if (status & RS_RES15)
-		PRINTK("RS_RES15 ");
+		pr_debug("RS_RES15 ");
 	if (status & RS_HARDERROR)
-		PRINTK("RS_HARDERROR ");
+		pr_debug("RS_HARDERROR ");
 	if (status & RS_SOFTERROR)
-		PRINTK("RS_SOFTERROR ");
+		pr_debug("RS_SOFTERROR ");
 	if (status & RS_BEACON)
-		PRINTK("RS_BEACON ");
+		pr_debug("RS_BEACON ");
 	if (status & RS_PATHTEST)
-		PRINTK("RS_PATHTEST ");
+		pr_debug("RS_PATHTEST ");
 	if (status & RS_SELFTEST)
-		PRINTK("RS_SELFTEST ");
+		pr_debug("RS_SELFTEST ");
 	if (status & RS_RES9)
-		PRINTK("RS_RES9 ");
+		pr_debug("RS_RES9 ");
 	if (status & RS_DISCONNECT)
-		PRINTK("RS_DISCONNECT ");
+		pr_debug("RS_DISCONNECT ");
 	if (status & RS_RES7)
-		PRINTK("RS_RES7 ");
+		pr_debug("RS_RES7 ");
 	if (status & RS_DUPADDR)
-		PRINTK("RS_DUPADDR ");
+		pr_debug("RS_DUPADDR ");
 	if (status & RS_NORINGOP)
-		PRINTK("RS_NORINGOP ");
+		pr_debug("RS_NORINGOP ");
 	if (status & RS_VERSION)
-		PRINTK("RS_VERSION ");
+		pr_debug("RS_VERSION ");
 	if (status & RS_STUCKBYPASSS)
-		PRINTK("RS_STUCKBYPASSS ");
+		pr_debug("RS_STUCKBYPASSS ");
 	if (status & RS_EVENT)
-		PRINTK("RS_EVENT ");
+		pr_debug("RS_EVENT ");
 	if (status & RS_RINGOPCHANGE)
-		PRINTK("RS_RINGOPCHANGE ");
+		pr_debug("RS_RINGOPCHANGE ");
 	if (status & RS_RES0)
-		PRINTK("RS_RES0 ");
-	PRINTK("]\n");
+		pr_debug("RS_RES0 ");
+	pr_debug("]\n");
 }				// ring_status_indication
 
 
@@ -2057,17 +2051,17 @@ void smt_stat_counter(struct s_smc *smc, int stat)
 {
 //      BOOLEAN RingIsUp ;
 
-	PRINTK(KERN_INFO "smt_stat_counter\n");
+	pr_debug(KERN_INFO "smt_stat_counter\n");
 	switch (stat) {
 	case 0:
-		PRINTK(KERN_INFO "Ring operational change.\n");
+		pr_debug(KERN_INFO "Ring operational change.\n");
 		break;
 	case 1:
-		PRINTK(KERN_INFO "Receive fifo overflow.\n");
+		pr_debug(KERN_INFO "Receive fifo overflow.\n");
 		smc->os.MacStat.gen.rx_errors++;
 		break;
 	default:
-		PRINTK(KERN_INFO "Unknown status (%d).\n", stat);
+		pr_debug(KERN_INFO "Unknown status (%d).\n", stat);
 		break;
 	}
 }				// smt_stat_counter
@@ -2123,10 +2117,10 @@ void cfm_state_change(struct s_smc *smc, int c_state)
 		s = "SC11_C_WRAP_S";
 		break;
 	default:
-		PRINTK(KERN_INFO "cfm_state_change: unknown %d\n", c_state);
+		pr_debug(KERN_INFO "cfm_state_change: unknown %d\n", c_state);
 		return;
 	}
-	PRINTK(KERN_INFO "cfm_state_change: %s\n", s);
+	pr_debug(KERN_INFO "cfm_state_change: %s\n", s);
 #endif				// DRIVERDEBUG
 }				// cfm_state_change
 
@@ -2181,7 +2175,7 @@ void ecm_state_change(struct s_smc *smc, int e_state)
 		s = "unknown";
 		break;
 	}
-	PRINTK(KERN_INFO "ecm_state_change: %s\n", s);
+	pr_debug(KERN_INFO "ecm_state_change: %s\n", s);
 #endif				//DRIVERDEBUG
 }				// ecm_state_change
 
@@ -2236,7 +2230,7 @@ void rmt_state_change(struct s_smc *smc, int r_state)
 		s = "unknown";
 		break;
 	}
-	PRINTK(KERN_INFO "[rmt_state_change: %s]\n", s);
+	pr_debug(KERN_INFO "[rmt_state_change: %s]\n", s);
 #endif				// DRIVERDEBUG
 }				// rmt_state_change
 
@@ -2256,7 +2250,7 @@ void rmt_state_change(struct s_smc *smc, int r_state)
  ************************/
 void drv_reset_indication(struct s_smc *smc)
 {
-	PRINTK(KERN_INFO "entering drv_reset_indication\n");
+	pr_debug(KERN_INFO "entering drv_reset_indication\n");
 
 	smc->os.ResetRequested = TRUE;	// Set flag.
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index c11cdd08ec5..60d502eef4f 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2837,8 +2837,6 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 	}
 
-	dev->trans_start = jiffies;
-
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a2ff9cb1e7a..6b5946fe8ae 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1690,7 +1690,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 
 	sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
 
-	dev->trans_start = jiffies;
 	return NETDEV_TX_OK;
 
 mapping_unwind:
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index 8d36d40649e..c791ef76c1d 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -370,7 +370,7 @@ static int __init ultramca_probe(struct device *gen_dev)
 
 	outb(reg4, ioaddr + 4);
 
-	gen_dev->driver_data = dev;
+	dev_set_drvdata(gen_dev, dev);
 
 	/* The 8390 isn't at the base address, so fake the offset
 	 */
@@ -531,7 +531,7 @@ static int ultramca_close_card(struct net_device *dev)
 static int ultramca_remove(struct device *gen_dev)
 {
 	struct mca_device *mca_dev = to_mca_device(gen_dev);
-	struct net_device *dev = (struct net_device *)gen_dev->driver_data;
+	struct net_device *dev = dev_get_drvdata(gen_dev);
 
 	if (dev) {
 		/* NB: ultra_close_card() does free_irq */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 293610334a7..bc4976ac871 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1774,6 +1774,20 @@ static int __devinit smc911x_findirq(struct net_device *dev)
 	return probe_irq_off(cookie);
 }
 
+static const struct net_device_ops smc911x_netdev_ops = {
+	.ndo_open		= smc911x_open,
+	.ndo_stop		= smc911x_close,
+	.ndo_start_xmit		= smc911x_hard_start_xmit,
+	.ndo_tx_timeout		= smc911x_timeout,
+	.ndo_set_multicast_list	= smc911x_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= smc911x_poll_controller,
+#endif
+};
+
 /*
  * Function: smc911x_probe(unsigned long ioaddr)
  *
@@ -1940,16 +1954,9 @@ static int __devinit smc911x_probe(struct net_device *dev)
 	/* Fill in the fields of the device structure with ethernet values. */
 	ether_setup(dev);
 
-	dev->open = smc911x_open;
-	dev->stop = smc911x_close;
-	dev->hard_start_xmit = smc911x_hard_start_xmit;
-	dev->tx_timeout = smc911x_timeout;
+	dev->netdev_ops = &smc911x_netdev_ops;
 	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
-	dev->set_multicast_list = smc911x_set_multicast_list;
 	dev->ethtool_ops = &smc911x_ethtool_ops;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = smc911x_poll_controller;
-#endif
 
 	INIT_WORK(&lp->phy_configure, smc911x_phy_configure);
 	lp->mii.phy_id_mask = 0x1f;
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index 9a7973a5411..e02471b2f2b 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -503,7 +503,7 @@ static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * de
 		/* THIS SHOULD NEVER HAPPEN. */
 		dev->stats.tx_aborted_errors++;
 		printk(CARDNAME": Bad Craziness - sent packet while busy.\n" );
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	lp->saved_skb = skb;
 
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 329f890e290..f1f773b17fe 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -45,7 +45,8 @@
     defined(CONFIG_MACH_ZYLONITE) ||\
     defined(CONFIG_MACH_LITTLETON) ||\
     defined(CONFIG_MACH_ZYLONITE2) ||\
-    defined(CONFIG_ARCH_VIPER)
+    defined(CONFIG_ARCH_VIPER) ||\
+    defined(CONFIG_MACH_STARGATE2)
 
 #include <asm/mach-types.h>
 
@@ -73,7 +74,7 @@
 /* We actually can't write halfwords properly if not word aligned */
 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 {
-	if (machine_is_mainstone() && reg & 2) {
+	if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
 		unsigned int v = val << 16;
 		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 		writel(v, ioaddr + (reg & ~2));
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index eb7db032a78..b60639bd181 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -47,6 +47,7 @@
 #include <linux/bitops.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/swab.h>
 #include <linux/phy.h>
 #include <linux/smsc911x.h>
 #include "smsc911x.h"
@@ -175,6 +176,12 @@ static inline void
 smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
 		      unsigned int wordcount)
 {
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++));
+		return;
+	}
+
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
 		return;
@@ -194,6 +201,12 @@ static inline void
 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
 		     unsigned int wordcount)
 {
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			*buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO));
+		return;
+	}
+
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
 		return;
@@ -1963,7 +1976,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		retval = -ENODEV;
 		goto out_0;
 	}
-	res_size = res->end - res->start;
+	res_size = res->end - res->start + 1;
 
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
@@ -2096,12 +2109,58 @@ out_0:
 	return retval;
 }
 
+#ifdef CONFIG_PM
+/* This implementation assumes the devices remains powered on its VDDVARIO
+ * pins during suspend. */
+
+static int smsc911x_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct smsc911x_data *pdata = netdev_priv(dev);
+
+	/* enable wake on LAN, energy detection and the external PME
+	 * signal. */
+	smsc911x_reg_write(pdata, PMT_CTRL,
+		PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ |
+		PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_);
+
+	return 0;
+}
+
+static int smsc911x_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct smsc911x_data *pdata = netdev_priv(dev);
+	unsigned int to = 100;
+
+	/* Note 3.11 from the datasheet:
+	 * 	"When the LAN9220 is in a power saving state, a write of any
+	 * 	 data to the BYTE_TEST register will wake-up the device."
+	 */
+	smsc911x_reg_write(pdata, BYTE_TEST, 0);
+
+	/* poll the READY bit in PMT_CTRL. Any other access to the device is
+	 * forbidden while this bit isn't set. Try for 100ms and return -EIO
+	 * if it failed. */
+	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+		udelay(1000);
+
+	return (to == 0) ? -EIO : 0;
+}
+
+#else
+#define smsc911x_suspend	NULL
+#define smsc911x_resume		NULL
+#endif
+
 static struct platform_driver smsc911x_driver = {
 	.probe = smsc911x_drv_probe,
-	.remove = smsc911x_drv_remove,
+	.remove = __devexit_p(smsc911x_drv_remove),
 	.driver = {
 		.name = SMSC_CHIPNAME,
 	},
+	.suspend = smsc911x_suspend,
+	.resume = smsc911x_resume,
 };
 
 /* Entry point for loading the module */
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index 211e805c122..e4255d82938 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -223,7 +223,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	if (!laddr) {
 		printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name);
 		dev_kfree_skb(skb);
-		return 1;
+		return NETDEV_TX_BUSY
 	}
 
 	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index fcb943fca4f..838cce8b8ff 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1236,7 +1236,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
 	 */
 	if ((np->cur_tx - np->dirty_tx) + skb_num_frags(skb) * 2 > TX_RING_SIZE) {
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 #if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE)
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index a39c0b9ba8b..7bb27426dbd 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -1023,7 +1023,7 @@ static int sun3_82586_send_packet(struct sk_buff *skb, struct net_device *dev)
 #if(NUM_XMIT_BUFFS > 1)
 	if(test_and_set_bit(0,(void *) &p->lock)) {
 		printk("%s: Queue was locked\n",dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	else
 #endif
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index e5beb299cbd..534dfe3eef6 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -294,6 +294,16 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= lance_open,
+	.ndo_stop		= lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_mac_address	= NULL,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init lance_probe( struct net_device *dev)
 {
 	unsigned long ioaddr;
@@ -397,12 +407,7 @@ static int __init lance_probe( struct net_device *dev)
 	if (did_version++ == 0)
 		printk( version );
 
-	/* The LANCE-specific entries in the device structure. */
-	dev->open = &lance_open;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->stop = &lance_close;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->set_mac_address = NULL;
+	dev->netdev_ops = &lance_netdev_ops;
 //	KLUDGE -- REMOVE ME
 	set_bit(__LINK_STATE_PRESENT, &dev->state);
 
@@ -521,7 +526,7 @@ static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
 	if (netif_queue_stopped(dev)) {
 		int tickssofar = jiffies - dev->trans_start;
 		if (tickssofar < 20)
-			return( 1 );
+			return NETDEV_TX_BUSY;
 
 		DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
 					  dev->name, DREG ));
@@ -572,7 +577,7 @@ static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
 	if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
 		printk( "%s: tx queue lock!.\n", dev->name);
 		/* don't clear dev->tbusy flag. */
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	AREG = CSR0;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index c399b1955c1..545f81b34ad 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -369,7 +369,6 @@ struct netdev_private {
 	struct sk_buff* tx_skbuff[TX_RING_SIZE];
         dma_addr_t tx_ring_dma;
         dma_addr_t rx_ring_dma;
-	struct net_device_stats stats;
 	struct timer_list timer;		/* Media monitoring timer. */
 	/* Frequently used values: keep some adjacent for cache effect. */
 	spinlock_t lock;
@@ -975,7 +974,7 @@ static void tx_timeout(struct net_device *dev)
 	dev->if_port = 0;
 
 	dev->trans_start = jiffies;
-	np->stats.tx_errors++;
+	dev->stats.tx_errors++;
 	if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
 		netif_wake_queue(dev);
 	}
@@ -1123,7 +1122,7 @@ reset_tx (struct net_device *dev)
 			else
 				dev_kfree_skb (skb);
 			np->tx_skbuff[i] = NULL;
-			np->stats.tx_dropped++;
+			dev->stats.tx_dropped++;
 		}
 	}
 	np->cur_tx = np->dirty_tx = 0;
@@ -1181,15 +1180,15 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 					if (netif_msg_tx_err(np))
 						printk("%s: Transmit error status %4.4x.\n",
 							   dev->name, tx_status);
-					np->stats.tx_errors++;
+					dev->stats.tx_errors++;
 					if (tx_status & 0x10)
-						np->stats.tx_fifo_errors++;
+						dev->stats.tx_fifo_errors++;
 					if (tx_status & 0x08)
-						np->stats.collisions++;
+						dev->stats.collisions++;
 					if (tx_status & 0x04)
-						np->stats.tx_fifo_errors++;
+						dev->stats.tx_fifo_errors++;
 					if (tx_status & 0x02)
-						np->stats.tx_window_errors++;
+						dev->stats.tx_window_errors++;
 
 					/*
 					** This reset has been verified on
@@ -1313,11 +1312,15 @@ static void rx_poll(unsigned long data)
 			if (netif_msg_rx_err(np))
 				printk(KERN_DEBUG "  netdev_rx() Rx error was %8.8x.\n",
 					   frame_status);
-			np->stats.rx_errors++;
-			if (frame_status & 0x00100000) np->stats.rx_length_errors++;
-			if (frame_status & 0x00010000) np->stats.rx_fifo_errors++;
-			if (frame_status & 0x00060000) np->stats.rx_frame_errors++;
-			if (frame_status & 0x00080000) np->stats.rx_crc_errors++;
+			dev->stats.rx_errors++;
+			if (frame_status & 0x00100000)
+				dev->stats.rx_length_errors++;
+			if (frame_status & 0x00010000)
+				dev->stats.rx_fifo_errors++;
+			if (frame_status & 0x00060000)
+				dev->stats.rx_frame_errors++;
+			if (frame_status & 0x00080000)
+				dev->stats.rx_crc_errors++;
 			if (frame_status & 0x00100000) {
 				printk(KERN_WARNING "%s: Oversized Ethernet frame,"
 					   " status %8.8x.\n",
@@ -1485,22 +1488,22 @@ static struct net_device_stats *get_stats(struct net_device *dev)
 	   the vulnerability window is very small and statistics are
 	   non-critical. */
 	/* The chip only need report frame silently dropped. */
-	np->stats.rx_missed_errors	+= ioread8(ioaddr + RxMissed);
-	np->stats.tx_packets += ioread16(ioaddr + TxFramesOK);
-	np->stats.rx_packets += ioread16(ioaddr + RxFramesOK);
-	np->stats.collisions += ioread8(ioaddr + StatsLateColl);
-	np->stats.collisions += ioread8(ioaddr + StatsMultiColl);
-	np->stats.collisions += ioread8(ioaddr + StatsOneColl);
-	np->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError);
+	dev->stats.rx_missed_errors	+= ioread8(ioaddr + RxMissed);
+	dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK);
+	dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK);
+	dev->stats.collisions += ioread8(ioaddr + StatsLateColl);
+	dev->stats.collisions += ioread8(ioaddr + StatsMultiColl);
+	dev->stats.collisions += ioread8(ioaddr + StatsOneColl);
+	dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError);
 	ioread8(ioaddr + StatsTxDefer);
 	for (i = StatsTxDefer; i <= StatsMcastRx; i++)
 		ioread8(ioaddr + i);
-	np->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow);
-	np->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16;
-	np->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow);
-	np->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16;
+	dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow);
+	dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16;
+	dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow);
+	dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16;
 
-	return &np->stats;
+	return &dev->stats;
 }
 
 static void set_rx_mode(struct net_device *dev)
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 4e9bd380a5c..4ef729198e1 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2275,7 +2275,7 @@ static int happy_meal_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irq(&hp->happy_lock);
 		printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n",
 		       dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	entry = hp->tx_new;
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 0ce2db6ce2b..d737f6b8f87 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -688,14 +688,11 @@ static void tc_handle_link_change(struct net_device *dev)
 
 	if (status_change && netif_msg_link(lp)) {
 		phy_print_status(phydev);
-#ifdef DEBUG
-		printk(KERN_DEBUG
-		       "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
-		       dev->name,
-		       phy_read(phydev, MII_BMCR),
-		       phy_read(phydev, MII_BMSR),
-		       phy_read(phydev, MII_LPA));
-#endif
+		pr_debug("%s: MII BMCR %04x BMSR %04x LPA %04x\n",
+			 dev->name,
+			 phy_read(phydev, MII_BMCR),
+			 phy_read(phydev, MII_BMSR),
+			 phy_read(phydev, MII_LPA));
 	}
 }
 
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 7f4a9683ba1..3c2679cd196 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -948,8 +948,7 @@ static void print_rxfd(struct rxf_desc *rxfd);
 
 static void bdx_rxdb_destroy(struct rxdb *db)
 {
-	if (db)
-		vfree(db);
+	vfree(db);
 }
 
 static struct rxdb *bdx_rxdb_create(int nelem)
@@ -1482,10 +1481,8 @@ static void bdx_tx_db_close(struct txdb *d)
 {
 	BDX_ASSERT(d == NULL);
 
-	if (d->start) {
-		vfree(d->start);
-		d->start = NULL;
-	}
+	vfree(d->start);
+	d->start = NULL;
 }
 
 /*************************************************************************
@@ -1718,8 +1715,9 @@ static int bdx_tx_transmit(struct sk_buff *skb, struct net_device *ndev)
 	WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
 
 #endif
-	ndev->trans_start = jiffies;
-
+#ifdef BDX_LLTX
+	ndev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+#endif
 	priv->net_stats.tx_packets++;
 	priv->net_stats.tx_bytes += skb->len;
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 201be425643..46a3f86125b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.98"
-#define DRV_MODULE_RELDATE	"February 25, 2009"
+#define DRV_MODULE_VERSION	"3.99"
+#define DRV_MODULE_RELDATE	"April 20, 2009"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1950,7 +1950,8 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 				     GRC_LCLCTRL_GPIO_OUTPUT0 |
 				     GRC_LCLCTRL_GPIO_OUTPUT1),
 				    100);
-		} else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+		} else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
+			   tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
 			/* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
 			u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
 					     GRC_LCLCTRL_GPIO_OE1 |
@@ -2455,8 +2456,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		}
 	}
 
-	__tg3_set_mac_addr(tp, 0);
-
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 		u32 val;
 
@@ -4656,6 +4655,7 @@ static int tg3_poll(struct napi_struct *napi, int budget)
 			 * so we must read it before checking for more work.
 			 */
 			tp->last_tag = sblk->status_tag;
+			tp->last_irq_tag = tp->last_tag;
 			rmb();
 		} else
 			sblk->status &= ~SD_STATUS_UPDATED;
@@ -4811,7 +4811,7 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
 	 * Reading the PCI State register will confirm whether the
 	 * interrupt is ours and will flush the status block.
 	 */
-	if (unlikely(sblk->status_tag == tp->last_tag)) {
+	if (unlikely(sblk->status_tag == tp->last_irq_tag)) {
 		if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
 		    (tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
 			handled = 0;
@@ -4831,18 +4831,22 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
 	 * excessive spurious interrupts can be worse in some cases.
 	 */
 	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+
+	/*
+	 * In a shared interrupt configuration, sometimes other devices'
+	 * interrupts will scream.  We record the current status tag here
+	 * so that the above check can report that the screaming interrupts
+	 * are unhandled.  Eventually they will be silenced.
+	 */
+	tp->last_irq_tag = sblk->status_tag;
+
 	if (tg3_irq_sync(tp))
 		goto out;
-	if (napi_schedule_prep(&tp->napi)) {
-		prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
-		/* Update last_tag to mark that this status has been
-		 * seen. Because interrupt may be shared, we may be
-		 * racing with tg3_poll(), so only update last_tag
-		 * if tg3_poll() is not scheduled.
-		 */
-		tp->last_tag = sblk->status_tag;
-		__napi_schedule(&tp->napi);
-	}
+
+	prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+
+	napi_schedule(&tp->napi);
+
 out:
 	return IRQ_RETVAL(handled);
 }
@@ -5017,7 +5021,7 @@ static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
 		/* New SKB is guaranteed to be linear. */
 		entry = *start;
 		ret = skb_dma_map(&tp->pdev->dev, new_skb, DMA_TO_DEVICE);
-		new_addr = skb_shinfo(new_skb)->dma_maps[0];
+		new_addr = skb_shinfo(new_skb)->dma_head;
 
 		/* Make sure new skb does not cross any 4G boundaries.
 		 * Drop the packet if it does.
@@ -5151,7 +5155,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	sp = skb_shinfo(skb);
 
-	mapping = sp->dma_maps[0];
+	mapping = sp->dma_head;
 
 	tp->tx_buffers[entry].skb = skb;
 
@@ -5169,7 +5173,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = sp->dma_maps[i + 1];
+			mapping = sp->dma_maps[i];
 			tp->tx_buffers[entry].skb = NULL;
 
 			tg3_set_txd(tp, entry, mapping, len,
@@ -5190,9 +5194,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 out_unlock:
-    	mmiowb();
-
-	dev->trans_start = jiffies;
+	mmiowb();
 
 	return NETDEV_TX_OK;
 }
@@ -5329,7 +5331,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 
 	sp = skb_shinfo(skb);
 
-	mapping = sp->dma_maps[0];
+	mapping = sp->dma_head;
 
 	tp->tx_buffers[entry].skb = skb;
 
@@ -5354,7 +5356,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = sp->dma_maps[i + 1];
+			mapping = sp->dma_maps[i];
 
 			tp->tx_buffers[entry].skb = NULL;
 
@@ -5403,9 +5405,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 	}
 
 out_unlock:
-    	mmiowb();
-
-	dev->trans_start = jiffies;
+	mmiowb();
 
 	return NETDEV_TX_OK;
 }
@@ -6156,6 +6156,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tp->hw_status->status_tag = 0;
 	}
 	tp->last_tag = 0;
+	tp->last_irq_tag = 0;
 	smp_mb();
 	synchronize_irq(tp->pdev->irq);
 
@@ -6350,6 +6351,8 @@ static int tg3_halt(struct tg3 *tp, int kind, int silent)
 	tg3_abort_hw(tp, silent);
 	err = tg3_chip_reset(tp);
 
+	__tg3_set_mac_addr(tp, 0);
+
 	tg3_write_sig_legacy(tp, kind);
 	tg3_write_sig_post_reset(tp, kind);
 
@@ -6711,6 +6714,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(TG3_CPMU_HST_ACC, val);
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
+		val = tr32(PCIE_PWR_MGMT_THRESH) & ~PCIE_PWR_MGMT_L1_THRESH_MSK;
+		val |= PCIE_PWR_MGMT_EXT_ASPM_TMR_EN |
+		       PCIE_PWR_MGMT_L1_THRESH_4MS;
+		tw32(PCIE_PWR_MGMT_THRESH, val);
+	}
+
 	/* This works around an issue with Athlon chipsets on
 	 * B3 tigon3 silicon.  This bit has no effect on any
 	 * other revision.  But do not set this on PCI Express
@@ -7138,7 +7148,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	udelay(100);
 
 	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
-	tp->last_tag = 0;
 
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
 		tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
@@ -8539,6 +8548,9 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	u32 i, offset, len, b_offset, b_count;
 	__be32 val;
 
+	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+		return -EINVAL;
+
 	if (tp->link_config.phy_is_low_power)
 		return -EAGAIN;
 
@@ -8604,7 +8616,8 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	if (tp->link_config.phy_is_low_power)
 		return -EAGAIN;
 
-	if (eeprom->magic != TG3_EEPROM_MAGIC)
+	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	    eeprom->magic != TG3_EEPROM_MAGIC)
 		return -EINVAL;
 
 	offset = eeprom->offset;
@@ -9201,6 +9214,9 @@ static int tg3_test_nvram(struct tg3 *tp)
 	__be32 *buf;
 	int i, j, k, err = 0, size;
 
+	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+		return 0;
+
 	if (tg3_nvram_read(tp, 0, &magic) != 0)
 		return -EIO;
 
@@ -10183,7 +10199,8 @@ static void __devinit tg3_get_nvram_size(struct tg3 *tp)
 {
 	u32 val;
 
-	if (tg3_nvram_read(tp, 0, &val) != 0)
+	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	    tg3_nvram_read(tp, 0, &val) != 0)
 		return;
 
 	/* Selfboot format */
@@ -10565,6 +10582,7 @@ static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
 		}
 		break;
 	default:
+		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
 		return;
 	}
 
@@ -11365,7 +11383,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 	unsigned int i;
 	u32 magic;
 
-	if (tg3_nvram_read(tp, 0x0, &magic))
+	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	    tg3_nvram_read(tp, 0x0, &magic))
 		goto out_not_found;
 
 	if (magic == TG3_EEPROM_MAGIC) {
@@ -11457,6 +11476,15 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 out_not_found:
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		strcpy(tp->board_part_number, "BCM95906");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57780)
+		strcpy(tp->board_part_number, "BCM57780");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57760)
+		strcpy(tp->board_part_number, "BCM57760");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790)
+		strcpy(tp->board_part_number, "BCM57790");
 	else
 		strcpy(tp->board_part_number, "none");
 }
@@ -11667,6 +11695,14 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
 {
 	u32 val;
 
+	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) {
+		tp->fw_ver[0] = 's';
+		tp->fw_ver[1] = 'b';
+		tp->fw_ver[2] = '\0';
+
+		return;
+	}
+
 	if (tg3_nvram_read(tp, 0, &val))
 		return;
 
@@ -11952,7 +11988,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
 			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
+			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A1)
 				tp->tg3_flags3 |= TG3_FLG3_CLKREQ_BUG;
 		}
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
@@ -12144,7 +12181,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 
-	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
+	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
 		/* Turn off the debug UART. */
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
@@ -12454,7 +12492,8 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 	}
 	if (!addr_ok) {
 		/* Next, try NVRAM. */
-		if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
+		if (!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) &&
+		    !tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
 		    !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
 			memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
 			memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cb4c62abdd2..b3347c41a1a 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -95,6 +95,8 @@
 #define  CHIPREV_ID_5752_A1		 0x6001
 #define  CHIPREV_ID_5714_A2		 0x9002
 #define  CHIPREV_ID_5906_A1		 0xc001
+#define  CHIPREV_ID_57780_A0		 0x57780000
+#define  CHIPREV_ID_57780_A1		 0x57780001
 #define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
 #define   ASIC_REV_5700			 0x07
 #define   ASIC_REV_5701			 0x00
@@ -1697,6 +1699,8 @@
 
 #define PCIE_PWR_MGMT_THRESH		0x00007d28
 #define PCIE_PWR_MGMT_L1_THRESH_MSK	 0x0000ff00
+#define PCIE_PWR_MGMT_L1_THRESH_4MS	 0x0000ff00
+#define PCIE_PWR_MGMT_EXT_ASPM_TMR_EN	 0x01000000
 
 
 /* OTP bit definitions */
@@ -2501,6 +2505,7 @@ struct tg3 {
 	struct tg3_hw_status		*hw_status;
 	dma_addr_t			status_mapping;
 	u32				last_tag;
+	u32				last_irq_tag;
 
 	u32				msg_enable;
 
@@ -2635,6 +2640,7 @@ struct tg3 {
 #define TG3_FLG3_CLKREQ_BUG		0x00000800
 #define TG3_FLG3_PHY_ENABLE_APD		0x00001000
 #define TG3_FLG3_5755_PLUS		0x00002000
+#define TG3_FLG3_NO_NVRAM		0x00004000
 
 	struct timer_list		timer;
 	u16				timer_counter;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index aa6964922d5..384cb5e2839 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1111,7 +1111,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 			  dev->name, priv->txHead, priv->txTail );
 		netif_stop_queue(dev);
 		priv->txBusyCount++;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	tail_list->forward = 0;
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 534c0f38483..b40b6de2d08 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
 MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
 MODULE_FIRMWARE(FW_NAME);
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16 
  * 0 = Autosense   
@@ -1243,7 +1243,7 @@ static int xl_xmit(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	} else {
 		spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ; 
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 }
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 2e70ee8f145..b3715efdce5 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -169,7 +169,7 @@ static char *open_min_error[] = {
 	"Monitor Contention failer for RPL", "FDX Protocol Error"
 };
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16
  * 0 = Autosense         
@@ -1187,7 +1187,7 @@ static int streamer_xmit(struct sk_buff *skb, struct net_device *dev)
 	} else {
 	        netif_stop_queue(dev);
 	        spin_unlock_irqrestore(&streamer_priv->streamer_lock,flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 }
 
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d068a9d3688..451b54136ed 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
 				   "Reserved", "Reserved", "No Monitor Detected for RPL", 
 				   "Monitor Contention failer for RPL", "FDX Protocol Error"};
 
-/* Module paramters */
+/* Module parameters */
 
 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; 
 MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; 
@@ -1055,7 +1055,7 @@ static int olympic_xmit(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	} else {
 		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	} 
 
 }
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a91d9c55d78..54ad4ed0337 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -4601,7 +4601,7 @@ static int smctr_send_packet(struct sk_buff *skb, struct net_device *dev)
         netif_stop_queue(dev);
 
         if(tp->QueueSkb == 0)
-                return (1);     /* Return with tbusy set: queue full */
+                return NETDEV_TX_BUSY;     /* Return with tbusy set: queue full */
 
         tp->QueueSkb--;
         skb_queue_tail(&tp->SendSkbQueue, skb);
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index b11bb72dc7a..a2eab72b507 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -633,7 +633,7 @@ static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device
 		if (tms380tr_debug > 0)
 			printk(KERN_DEBUG "%s: No free TPL\n", dev->name);
 		spin_unlock_irqrestore(&tp->lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	dmabuf = 0;
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index d913405bc39..1cc8cf4425d 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -27,6 +27,18 @@ config DE2104X
 	  To compile this driver as a module, choose M here. The module will
 	  be called de2104x.
 
+config DE2104X_DSL
+	int "Descriptor Skip Length in 32 bit longwords"
+	depends on DE2104X
+	range 0 31
+	default 0
+	help
+	  Setting this value allows to align ring buffer descriptors into their
+	  own cache lines. Value of 4 corresponds to the typical 32 byte line
+	  (the descriptor is 16 bytes). This is necessary on systems that lack
+	  cache coherence, an example is PowerMac 5500. Otherwise 0 is safe.
+	  Default is 0, and range is 0 to 31.
+
 config TULIP
 	tristate "DECchip Tulip (dc2114x) PCI support"
 	depends on PCI
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d4c5ecc51f7..81f054dbb88 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -82,6 +82,13 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copi
 				 NETIF_MSG_RX_ERR	| \
 				 NETIF_MSG_TX_ERR)
 
+/* Descriptor skip length in 32 bit longwords. */
+#ifndef CONFIG_DE2104X_DSL
+#define DSL			0
+#else
+#define DSL			CONFIG_DE2104X_DSL
+#endif
+
 #define DE_RX_RING_SIZE		64
 #define DE_TX_RING_SIZE		64
 #define DE_RING_BYTES		\
@@ -153,6 +160,7 @@ enum {
 	CmdReset		= (1 << 0),
 	CacheAlign16		= 0x00008000,
 	BurstLen4		= 0x00000400,
+	DescSkipLen		= (DSL << 2),
 
 	/* Rx/TxPoll bits */
 	NormalTxPoll		= (1 << 0),
@@ -246,7 +254,7 @@ static const u32 de_intr_mask =
  * Set the programmable burst length to 4 longwords for all:
  * DMA errors result without these values. Cache align 16 long.
  */
-static const u32 de_bus_mode = CacheAlign16 | BurstLen4;
+static const u32 de_bus_mode = CacheAlign16 | BurstLen4 | DescSkipLen;
 
 struct de_srom_media_block {
 	u8			opts;
@@ -266,6 +274,9 @@ struct de_desc {
 	__le32			opts2;
 	__le32			addr1;
 	__le32			addr2;
+#if DSL
+	__le32			skip[DSL];
+#endif
 };
 
 struct media_info {
@@ -601,7 +612,7 @@ static int de_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	if (tx_free == 0) {
 		netif_stop_queue(dev);
 		spin_unlock_irq(&de->lock);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	tx_free--;
 
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index f9491bd787d..eb72d2e9ab3 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1099,7 +1099,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
     struct pci_dev *pdev = NULL;
     int i, status=0;
 
-    gendev->driver_data = dev;
+    dev_set_drvdata(gendev, dev);
 
     /* Ensure we're not sleeping */
     if (lp->bus == EISA) {
@@ -1461,12 +1461,12 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    int status = 0;
+    int status = NETDEV_TX_OK;
     u_long flags = 0;
 
     netif_stop_queue(dev);
     if (!lp->tx_enable) {                   /* Cannot send for now */
-	return -1;
+	return NETDEV_TX_LOCKED;
     }
 
     /*
@@ -1480,7 +1480,7 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 
     /* Test if cache is already locked - requeue skb if so */
     if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
-	return -1;
+	return NETDEV_TX_LOCKED;
 
     /* Transmit descriptor ring full or stale skb */
     if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
@@ -2094,7 +2094,7 @@ static int __devexit de4x5_eisa_remove (struct device *device)
 	struct net_device *dev;
 	u_long iobase;
 
-	dev = device->driver_data;
+	dev = dev_get_drvdata(device);
 	iobase = dev->base_addr;
 
 	unregister_netdev (dev);
@@ -2338,7 +2338,7 @@ static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
 	struct net_device *dev;
 	u_long iobase;
 
-	dev = pdev->dev.driver_data;
+	dev = dev_get_drvdata(&pdev->dev);
 	iobase = dev->base_addr;
 
 	unregister_netdev (dev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index f2e669974c7..8e78f003f08 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -686,7 +686,7 @@ static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
 		spin_unlock_irqrestore(&db->lock, flags);
 		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
 		       db->tx_queue_cnt);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Disable NIC interrupt */
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 8761a5a5bd7..9277ce8febe 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -591,7 +591,7 @@ static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
 		spin_unlock_irqrestore(&db->lock, flags);
 		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Disable NIC interrupt */
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 264e61404f3..842b1a2c40d 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1601,8 +1601,7 @@ static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
 
 		/* no more hardware accesses behind this line. */
 
-		BUG_ON(np->csr6);
-		if (ioread32(ioaddr + IntrEnable)) BUG();
+		BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable));
 
 		/* pci_power_off(pdev, -1); */
 
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 735bf41c654..811d3517fce 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -540,31 +540,38 @@ static inline struct sk_buff *tun_alloc_skb(struct tun_struct *tun,
 
 /* Get packet from user space buffer */
 static __inline__ ssize_t tun_get_user(struct tun_struct *tun,
-				       struct iovec *iv, size_t count,
+				       const struct iovec *iv, size_t count,
 				       int noblock)
 {
 	struct tun_pi pi = { 0, cpu_to_be16(ETH_P_IP) };
 	struct sk_buff *skb;
 	size_t len = count, align = 0;
 	struct virtio_net_hdr gso = { 0 };
+	int offset = 0;
 
 	if (!(tun->flags & TUN_NO_PI)) {
 		if ((len -= sizeof(pi)) > count)
 			return -EINVAL;
 
-		if(memcpy_fromiovec((void *)&pi, iv, sizeof(pi)))
+		if (memcpy_fromiovecend((void *)&pi, iv, 0, sizeof(pi)))
 			return -EFAULT;
+		offset += sizeof(pi);
 	}
 
 	if (tun->flags & TUN_VNET_HDR) {
 		if ((len -= sizeof(gso)) > count)
 			return -EINVAL;
 
-		if (memcpy_fromiovec((void *)&gso, iv, sizeof(gso)))
+		if (memcpy_fromiovecend((void *)&gso, iv, offset, sizeof(gso)))
 			return -EFAULT;
 
+		if ((gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) &&
+		    gso.csum_start + gso.csum_offset + 2 > gso.hdr_len)
+			gso.hdr_len = gso.csum_start + gso.csum_offset + 2;
+
 		if (gso.hdr_len > len)
 			return -EINVAL;
+		offset += sizeof(gso);
 	}
 
 	if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
@@ -581,7 +588,7 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun,
 		return PTR_ERR(skb);
 	}
 
-	if (skb_copy_datagram_from_iovec(skb, 0, iv, len)) {
+	if (skb_copy_datagram_from_iovec(skb, 0, iv, offset, len)) {
 		tun->dev->stats.rx_dropped++;
 		kfree_skb(skb);
 		return -EFAULT;
@@ -673,7 +680,7 @@ static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv,
 
 	DBG(KERN_INFO "%s: tun_chr_write %ld\n", tun->dev->name, count);
 
-	result = tun_get_user(tun, (struct iovec *)iv, iov_length(iv, count),
+	result = tun_get_user(tun, iv, iov_length(iv, count),
 			      file->f_flags & O_NONBLOCK);
 
 	tun_put(tun);
@@ -683,7 +690,7 @@ static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv,
 /* Put packet to the user space buffer */
 static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 				       struct sk_buff *skb,
-				       struct iovec *iv, int len)
+				       const struct iovec *iv, int len)
 {
 	struct tun_pi pi = { 0, skb->protocol };
 	ssize_t total = 0;
@@ -697,7 +704,7 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 			pi.flags |= TUN_PKT_STRIP;
 		}
 
-		if (memcpy_toiovec(iv, (void *) &pi, sizeof(pi)))
+		if (memcpy_toiovecend(iv, (void *) &pi, 0, sizeof(pi)))
 			return -EFAULT;
 		total += sizeof(pi);
 	}
@@ -730,14 +737,15 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 			gso.csum_offset = skb->csum_offset;
 		} /* else everything is zero */
 
-		if (unlikely(memcpy_toiovec(iv, (void *)&gso, sizeof(gso))))
+		if (unlikely(memcpy_toiovecend(iv, (void *)&gso, total,
+					       sizeof(gso))))
 			return -EFAULT;
 		total += sizeof(gso);
 	}
 
 	len = min_t(int, skb->len, len);
 
-	skb_copy_datagram_iovec(skb, 0, iv, len);
+	skb_copy_datagram_const_iovec(skb, 0, iv, total, len);
 	total += len;
 
 	tun->dev->stats.tx_packets++;
@@ -792,7 +800,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
 		}
 		netif_wake_queue(tun->dev);
 
-		ret = tun_put_user(tun, skb, (struct iovec *) iv, len);
+		ret = tun_put_user(tun, skb, iv, len);
 		kfree_skb(skb);
 		break;
 	}
@@ -840,12 +848,12 @@ static void tun_sock_write_space(struct sock *sk)
 	if (!sock_writeable(sk))
 		return;
 
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
-		wake_up_interruptible_sync(sk->sk_sleep);
-
 	if (!test_and_clear_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags))
 		return;
 
+	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		wake_up_interruptible_sync(sk->sk_sleep);
+
 	tun = container_of(sk, struct tun_sock, sk)->tun;
 	kill_fasync(&tun->fasync, SIGIO, POLL_OUT);
 }
@@ -861,6 +869,52 @@ static struct proto tun_proto = {
 	.obj_size	= sizeof(struct tun_sock),
 };
 
+static int tun_flags(struct tun_struct *tun)
+{
+	int flags = 0;
+
+	if (tun->flags & TUN_TUN_DEV)
+		flags |= IFF_TUN;
+	else
+		flags |= IFF_TAP;
+
+	if (tun->flags & TUN_NO_PI)
+		flags |= IFF_NO_PI;
+
+	if (tun->flags & TUN_ONE_QUEUE)
+		flags |= IFF_ONE_QUEUE;
+
+	if (tun->flags & TUN_VNET_HDR)
+		flags |= IFF_VNET_HDR;
+
+	return flags;
+}
+
+static ssize_t tun_show_flags(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct tun_struct *tun = netdev_priv(to_net_dev(dev));
+	return sprintf(buf, "0x%x\n", tun_flags(tun));
+}
+
+static ssize_t tun_show_owner(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct tun_struct *tun = netdev_priv(to_net_dev(dev));
+	return sprintf(buf, "%d\n", tun->owner);
+}
+
+static ssize_t tun_show_group(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct tun_struct *tun = netdev_priv(to_net_dev(dev));
+	return sprintf(buf, "%d\n", tun->group);
+}
+
+static DEVICE_ATTR(tun_flags, 0444, tun_show_flags, NULL);
+static DEVICE_ATTR(owner, 0444, tun_show_owner, NULL);
+static DEVICE_ATTR(group, 0444, tun_show_group, NULL);
+
 static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 {
 	struct sock *sk;
@@ -870,6 +924,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 
 	dev = __dev_get_by_name(net, ifr->ifr_name);
 	if (dev) {
+		if (ifr->ifr_flags & IFF_TUN_EXCL)
+			return -EBUSY;
 		if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops)
 			tun = netdev_priv(dev);
 		else if ((ifr->ifr_flags & IFF_TAP) && dev->netdev_ops == &tap_netdev_ops)
@@ -944,6 +1000,11 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 		if (err < 0)
 			goto err_free_sk;
 
+		if (device_create_file(&tun->dev->dev, &dev_attr_tun_flags) ||
+		    device_create_file(&tun->dev->dev, &dev_attr_owner) ||
+		    device_create_file(&tun->dev->dev, &dev_attr_group))
+			printk(KERN_ERR "Failed to create tun sysfs files\n");
+
 		sk->sk_destruct = tun_sock_destruct;
 
 		err = tun_attach(tun, file);
@@ -996,21 +1057,7 @@ static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
 
 	strcpy(ifr->ifr_name, tun->dev->name);
 
-	ifr->ifr_flags = 0;
-
-	if (ifr->ifr_flags & TUN_TUN_DEV)
-		ifr->ifr_flags |= IFF_TUN;
-	else
-		ifr->ifr_flags |= IFF_TAP;
-
-	if (tun->flags & TUN_NO_PI)
-		ifr->ifr_flags |= IFF_NO_PI;
-
-	if (tun->flags & TUN_ONE_QUEUE)
-		ifr->ifr_flags |= IFF_ONE_QUEUE;
-
-	if (tun->flags & TUN_VNET_HDR)
-		ifr->ifr_flags |= IFF_VNET_HDR;
+	ifr->ifr_flags = tun_flags(tun);
 
 	tun_put(tun);
 	return 0;
@@ -1275,21 +1322,22 @@ static int tun_chr_open(struct inode *inode, struct file * file)
 static int tun_chr_close(struct inode *inode, struct file *file)
 {
 	struct tun_file *tfile = file->private_data;
-	struct tun_struct *tun = __tun_get(tfile);
+	struct tun_struct *tun;
 
 
+	rtnl_lock();
+	tun = __tun_get(tfile);
 	if (tun) {
 		DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
 
-		rtnl_lock();
 		__tun_detach(tun);
 
 		/* If desireable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST))
 			unregister_netdevice(tun->dev);
 
-		rtnl_unlock();
 	}
+	rtnl_unlock();
 
 	tun = tfile->tun;
 	if (tun)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 44f8392da11..e2f2e91cfdd 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *	   Li Yang <leoli@freescale.com>
@@ -27,6 +27,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/workqueue.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/uaccess.h>
@@ -64,6 +65,8 @@
 
 static DEFINE_SPINLOCK(ugeth_lock);
 
+static void uec_configure_serdes(struct net_device *dev);
+
 static struct {
 	u32 msg_enable;
 } debug = { -1 };
@@ -270,7 +273,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
 				  u8 num_entries,
 				  u32 thread_size,
 				  u32 thread_alignment,
-				  enum qe_risc_allocation risc,
+				  unsigned int risc,
 				  int skip_page_for_first_entry)
 {
 	u32 init_enet_offset;
@@ -307,7 +310,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
 static int return_init_enet_entries(struct ucc_geth_private *ugeth,
 				    u32 *p_start,
 				    u8 num_entries,
-				    enum qe_risc_allocation risc,
+				    unsigned int risc,
 				    int skip_page_for_first_entry)
 {
 	u32 init_enet_offset;
@@ -342,7 +345,7 @@ static int dump_init_enet_entries(struct ucc_geth_private *ugeth,
 				  u32 __iomem *p_start,
 				  u8 num_entries,
 				  u32 thread_size,
-				  enum qe_risc_allocation risc,
+				  unsigned int risc,
 				  int skip_page_for_first_entry)
 {
 	u32 init_enet_offset;
@@ -1409,6 +1412,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
 		upsmr |= UCC_GETH_UPSMR_TBIM;
 	}
+	if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
+		upsmr |= UCC_GETH_UPSMR_SGMM;
+
 	out_be32(&uf_regs->upsmr, upsmr);
 
 	/* Disable autonegotiation in tbi mode, because by default it
@@ -1543,14 +1549,19 @@ static int init_phy(struct net_device *dev)
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
-			     priv->phy_interface);
+	if (!ug_info->phy_node)
+		return 0;
 
-	if (IS_ERR(phydev)) {
+	phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
+				priv->phy_interface);
+	if (!phydev) {
 		printk("%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
+		return -ENODEV;
 	}
 
+	if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
+		uec_configure_serdes(dev);
+
 	phydev->supported &= (ADVERTISED_10baseT_Half |
 				 ADVERTISED_10baseT_Full |
 				 ADVERTISED_100baseT_Half |
@@ -1566,7 +1577,41 @@ static int init_phy(struct net_device *dev)
 	return 0;
 }
 
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip.  We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register.  We assume
+ * that the UTBIPA register is valid.  Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
 
+	if (!ugeth->tbiphy) {
+		printk(KERN_WARNING "SGMII mode requires that the device "
+			"tree specify a tbi-handle\n");
+	return;
+	}
+
+	/*
+	 * If the link is already up, we must already be ok, and don't need to
+	 * configure and reset the TBI<->SerDes link.  Maybe U-Boot configured
+	 * everything for us?  Resetting it takes the link down and requires
+	 * several seconds for it to come back.
+	 */
+	if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+		return;
+
+	/* Single clk mode, mii mode off(for serdes communication) */
+	phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+	phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+	phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+
+}
 
 static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 {
@@ -2135,6 +2180,14 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
 		return -ENOMEM;
 	}
 
+	/* read the number of risc engines, update the riscTx and riscRx
+	 * if there are 4 riscs in QE
+	 */
+	if (qe_get_num_of_risc() == 4) {
+		ug_info->riscTx = QE_RISC_ALLOCATION_FOUR_RISCS;
+		ug_info->riscRx = QE_RISC_ALLOCATION_FOUR_RISCS;
+	}
+
 	ugeth->ug_regs = ioremap(uf_info->regs, sizeof(*ugeth->ug_regs));
 	if (!ugeth->ug_regs) {
 		if (netif_msg_probe(ugeth))
@@ -3217,7 +3270,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ)
 		dev->stats.tx_packets++;
 
 		/* Free the sk buffer associated with this TxBD */
-		dev_kfree_skb_irq(ugeth->
+		dev_kfree_skb(ugeth->
 				  tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]);
 		ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]] = NULL;
 		ugeth->skb_dirtytx[txQ] =
@@ -3251,9 +3304,15 @@ static int ucc_geth_poll(struct napi_struct *napi, int budget)
 	for (i = 0; i < ug_info->numQueuesRx; i++)
 		howmany += ucc_geth_rx(ugeth, i, budget - howmany);
 
+	/* Tx event processing */
+	spin_lock(&ugeth->lock);
+	for (i = 0; i < ug_info->numQueuesTx; i++)
+		ucc_geth_tx(ugeth->ndev, i);
+	spin_unlock(&ugeth->lock);
+
 	if (howmany < budget) {
 		napi_complete(napi);
-		setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS);
+		setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS | UCCE_TX_EVENTS);
 	}
 
 	return howmany;
@@ -3267,8 +3326,6 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
 	struct ucc_geth_info *ug_info;
 	register u32 ucce;
 	register u32 uccm;
-	register u32 tx_mask;
-	u8 i;
 
 	ugeth_vdbg("%s: IN", __func__);
 
@@ -3282,27 +3339,14 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
 	out_be32(uccf->p_ucce, ucce);
 
 	/* check for receive events that require processing */
-	if (ucce & UCCE_RX_EVENTS) {
+	if (ucce & (UCCE_RX_EVENTS | UCCE_TX_EVENTS)) {
 		if (napi_schedule_prep(&ugeth->napi)) {
-			uccm &= ~UCCE_RX_EVENTS;
+			uccm &= ~(UCCE_RX_EVENTS | UCCE_TX_EVENTS);
 			out_be32(uccf->p_uccm, uccm);
 			__napi_schedule(&ugeth->napi);
 		}
 	}
 
-	/* Tx event processing */
-	if (ucce & UCCE_TX_EVENTS) {
-		spin_lock(&ugeth->lock);
-		tx_mask = UCC_GETH_UCCE_TXB0;
-		for (i = 0; i < ug_info->numQueuesTx; i++) {
-			if (ucce & tx_mask)
-				ucc_geth_tx(dev, i);
-			ucce &= ~tx_mask;
-			tx_mask <<= 1;
-		}
-		spin_unlock(&ugeth->lock);
-	}
-
 	/* Errors and other events */
 	if (ucce & UCCE_OTHER) {
 		if (ucce & UCC_GETH_UCCE_BSY)
@@ -3331,6 +3375,37 @@ static void ucc_netpoll(struct net_device *dev)
 }
 #endif /* CONFIG_NET_POLL_CONTROLLER */
 
+static int ucc_geth_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	/*
+	 * If device is not running, we will set mac addr register
+	 * when opening the device.
+	 */
+	if (!netif_running(dev))
+		return 0;
+
+	spin_lock_irq(&ugeth->lock);
+	init_mac_station_addr_regs(dev->dev_addr[0],
+				   dev->dev_addr[1],
+				   dev->dev_addr[2],
+				   dev->dev_addr[3],
+				   dev->dev_addr[4],
+				   dev->dev_addr[5],
+				   &ugeth->ug_regs->macstnaddr1,
+				   &ugeth->ug_regs->macstnaddr2);
+	spin_unlock_irq(&ugeth->lock);
+
+	return 0;
+}
+
 /* Called when something needs to use the ethernet device */
 /* Returns 0 for success. */
 static int ucc_geth_open(struct net_device *dev)
@@ -3498,6 +3573,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
 		return PHY_INTERFACE_MODE_RGMII_RXID;
 	if (strcasecmp(phy_connection_type, "rtbi") == 0)
 		return PHY_INTERFACE_MODE_RTBI;
+	if (strcasecmp(phy_connection_type, "sgmii") == 0)
+		return PHY_INTERFACE_MODE_SGMII;
 
 	return PHY_INTERFACE_MODE_MII;
 }
@@ -3507,7 +3584,7 @@ static const struct net_device_ops ucc_geth_netdev_ops = {
 	.ndo_stop		= ucc_geth_close,
 	.ndo_start_xmit		= ucc_geth_start_xmit,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_set_mac_address	= ucc_geth_set_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_multicast_list	= ucc_geth_set_multi,
 	.ndo_tx_timeout		= ucc_geth_timeout,
@@ -3520,14 +3597,12 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 {
 	struct device *device = &ofdev->dev;
 	struct device_node *np = ofdev->node;
-	struct device_node *mdio;
 	struct net_device *dev = NULL;
 	struct ucc_geth_private *ugeth = NULL;
 	struct ucc_geth_info *ug_info;
 	struct resource res;
 	struct device_node *phy;
 	int err, ucc_num, max_speed = 0;
-	const phandle *ph;
 	const u32 *fixed_link;
 	const unsigned int *prop;
 	const char *sprop;
@@ -3544,6 +3619,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
 		PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
 		PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
+		PHY_INTERFACE_MODE_SGMII,
 	};
 
 	ugeth_vdbg("%s: IN", __func__);
@@ -3627,40 +3703,13 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
 	fixed_link = of_get_property(np, "fixed-link", NULL);
 	if (fixed_link) {
-		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
-			 PHY_ID_FMT, "0", fixed_link[0]);
 		phy = NULL;
 	} else {
-		char bus_name[MII_BUS_ID_SIZE];
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		phy = of_find_node_by_phandle(*ph);
-
+		phy = of_parse_phandle(np, "phy-handle", 0);
 		if (phy == NULL)
 			return -ENODEV;
-
-		/* set the PHY address */
-		prop = of_get_property(phy, "reg", NULL);
-		if (prop == NULL)
-			return -1;
-
-		/* Set the bus id */
-		mdio = of_get_parent(phy);
-
-		if (mdio == NULL)
-			return -ENODEV;
-
-		err = of_address_to_resource(mdio, 0, &res);
-
-		if (err) {
-			of_node_put(mdio);
-			return err;
-		}
-		fsl_pq_mdio_bus_name(bus_name, mdio);
-		of_node_put(mdio);
-		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
-			"%s:%02x", bus_name, *prop);
 	}
+	ug_info->phy_node = phy;
 
 	/* get the phy interface type, or default to MII */
 	prop = of_get_property(np, "phy-connection-type", NULL);
@@ -3686,6 +3735,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		case PHY_INTERFACE_MODE_RGMII_TXID:
 		case PHY_INTERFACE_MODE_TBI:
 		case PHY_INTERFACE_MODE_RTBI:
+		case PHY_INTERFACE_MODE_SGMII:
 			max_speed = SPEED_1000;
 			break;
 		default:
@@ -3702,7 +3752,15 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT;
 		ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
 		ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
-		ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
+
+		/* If QE's snum number is 46 which means we need to support
+		 * 4 UECs at 1000Base-T simultaneously, we need to allocate
+		 * more Threads to Rx.
+		 */
+		if (qe_get_num_of_snums() == 46)
+			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
+		else
+			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
 	}
 
 	if (netif_msg_probe(&debug))
@@ -3735,7 +3793,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	dev->netdev_ops = &ucc_geth_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 	INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
-	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, UCC_GETH_DEV_WEIGHT);
+	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 64);
 	dev->mtu = 1500;
 
 	ugeth->msg_enable = netif_msg_init(debug.msg_enable, UGETH_MSG_DEFAULT);
@@ -3760,6 +3818,37 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ugeth->ndev = dev;
 	ugeth->node = np;
 
+	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
+	ph = of_get_property(np, "tbi-handle", NULL);
+	if (ph) {
+		struct device_node *tbi = of_find_node_by_phandle(*ph);
+		struct of_device *ofdev;
+		struct mii_bus *bus;
+		const unsigned int *id;
+
+		if (!tbi)
+			return 0;
+
+		mdio = of_get_parent(tbi);
+		if (!mdio)
+			return 0;
+
+		ofdev = of_find_device_by_node(mdio);
+
+		of_node_put(mdio);
+
+		id = of_get_property(tbi, "reg", NULL);
+		if (!id)
+			return 0;
+		of_node_put(tbi);
+
+		bus = dev_get_drvdata(&ofdev->dev);
+		if (!bus)
+			return 0;
+
+		ugeth->tbiphy = bus->phy_map[*id];
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 2f8ee7c87ef..5beba4c1453 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *
@@ -193,6 +193,31 @@ struct ucc_geth {
 #define	ENET_TBI_MII_JD		0x10	/* Jitter diagnostics */
 #define	ENET_TBI_MII_TBICON	0x11	/* TBI control */
 
+/* TBI MDIO register bit fields*/
+#define TBISR_LSTATUS          0x0004
+#define TBICON_CLK_SELECT       0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE  0x0080
+#define TBIANA_HALF_DUPLEX      0x0040
+#define TBIANA_FULL_DUPLEX      0x0020
+#define TBICR_PHY_RESET         0x8000
+#define TBICR_ANEG_ENABLE       0x1000
+#define TBICR_RESTART_ANEG      0x0200
+#define TBICR_FULL_DUPLEX       0x0100
+#define TBICR_SPEED1_SET        0x0040
+
+#define TBIANA_SETTINGS ( \
+		TBIANA_ASYMMETRIC_PAUSE \
+		| TBIANA_SYMMETRIC_PAUSE \
+		| TBIANA_FULL_DUPLEX \
+		)
+#define TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
 #define MACCFG1_FLOW_RX                         0x00000020	/* Flow Control
 								   Rx */
@@ -852,7 +877,6 @@ struct ucc_geth_hardware_statistics {
 /* Driver definitions */
 #define TX_BD_RING_LEN                          0x10
 #define RX_BD_RING_LEN                          0x10
-#define UCC_GETH_DEV_WEIGHT                     TX_BD_RING_LEN
 
 #define TX_RING_MOD_MASK(size)                  (size-1)
 #define RX_RING_MOD_MASK(size)                  (size-1)
@@ -1100,7 +1124,7 @@ struct ucc_geth_info {
 	u32 eventRegMask;
 	u16 pausePeriod;
 	u16 extensionField;
-	char phy_bus_id[BUS_ID_SIZE];
+	struct device_node *phy_node;
 	u8 weightfactor[NUM_TX_QUEUES];
 	u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
 	u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
@@ -1120,8 +1144,8 @@ struct ucc_geth_info {
 	enum ucc_geth_maccfg2_pad_and_crc_mode padAndCrc;
 	enum ucc_geth_num_of_threads numThreadsTx;
 	enum ucc_geth_num_of_threads numThreadsRx;
-	enum qe_risc_allocation riscTx;
-	enum qe_risc_allocation riscRx;
+	unsigned int riscTx;
+	unsigned int riscRx;
 };
 
 /* structure representing UCC GETH */
@@ -1189,6 +1213,7 @@ struct ucc_geth_private {
 
 	struct ugeth_mii_info *mii_info;
 	struct phy_device *phydev;
+	struct phy_device *tbiphy;
 	phy_interface_t phy_interface;
 	int max_speed;
 	uint32_t msg_enable;
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6fcb500257b..61fe80dda3e 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
  *
  * Limitation:
  * Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index dfc6cf765fb..3717569828b 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -359,4 +359,12 @@ config USB_HSO
 	  To compile this driver as a module, choose M here: the
 	  module will be called hso.
 
+config USB_NET_INT51X1
+	tristate "Intellon PLC based usb adapter"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a 14Mb USB-based PLC
+	  (Powerline Communications) solution with an Intellon
+	  INT51x1/INT5200 chip, like the "devolo dLan duo".
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index c8aef62cf2b..b870b0b1cbe 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
 obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
 obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
+obj-$(CONFIG_USB_NET_INT51X1)	+= int51x1.o
 
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 55e8ecc3a9e..01fd528306e 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/ctype.h>
 #include <linux/ethtool.h>
 #include <linux/workqueue.h>
 #include <linux/mii.h>
@@ -389,36 +388,6 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 	}
 }
 
-static u8 nibble(unsigned char c)
-{
-	if (likely(isdigit(c)))
-		return c - '0';
-	c = toupper(c);
-	if (likely(isxdigit(c)))
-		return 10 + c - 'A';
-	return 0;
-}
-
-static inline int
-get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e)
-{
-	int 		tmp, i;
-	unsigned char	buf [13];
-
-	tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf);
-	if (tmp != 12) {
-		dev_dbg(&dev->udev->dev,
-			"bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
-		if (tmp >= 0)
-			tmp = -EINVAL;
-		return tmp;
-	}
-	for (i = tmp = 0; i < 6; i++, tmp += 2)
-		dev->net->dev_addr [i] =
-			(nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
-	return 0;
-}
-
 static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int				status;
@@ -428,7 +397,7 @@ static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (status < 0)
 		return status;
 
-	status = get_ethernet_addr(dev, info->ether);
+	status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
 	if (status < 0) {
 		usb_set_intfdata(info->data, NULL);
 		usb_driver_release_interface(driver_of(intf), info->data);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 6fc4f82b0be..7ae82446b93 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -497,10 +497,10 @@ static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	int len;
 
 	/* format:
-	   b0: rx status
-	   b1: packet length (incl crc) low
-	   b2: packet length (incl crc) high
-	   b3..n-4: packet data
+	   b1: rx status
+	   b2: packet length (incl crc) low
+	   b3: packet length (incl crc) high
+	   b4..n-4: packet data
 	   bn-3..bn: ethernet crc
 	 */
 
@@ -533,8 +533,8 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	int len;
 
 	/* format:
-	   b0: packet length low
-	   b1: packet length high
+	   b1: packet length low
+	   b2: packet length high
 	   b3..n: packet data
 	*/
 
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index f84b78d94c4..f8c6d7ea726 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -482,7 +482,7 @@ static ssize_t hso_sysfs_show_porttype(struct device *dev,
 				       struct device_attribute *attr,
 				       char *buf)
 {
-	struct hso_device *hso_dev = dev->driver_data;
+	struct hso_device *hso_dev = dev_get_drvdata(dev);
 	char *port_name;
 
 	if (!hso_dev)
@@ -816,7 +816,7 @@ static int hso_net_start_xmit(struct sk_buff *skb, struct net_device *net)
 	}
 	dev_kfree_skb(skb);
 	/* we're done */
-	return result;
+	return NETDEV_TX_OK;
 }
 
 static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
@@ -899,15 +899,14 @@ static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
 					continue;
 				}
 				/* Allocate an sk_buff */
-				odev->skb_rx_buf = dev_alloc_skb(frame_len);
+				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
+								    frame_len);
 				if (!odev->skb_rx_buf) {
 					/* We got no receive buffer. */
 					D1("could not allocate memory");
 					odev->rx_parse_state = WAIT_SYNC;
 					return;
 				}
-				/* Here's where it came from */
-				odev->skb_rx_buf->dev = odev->net;
 
 				/* Copy what we got so far. make room for iphdr
 				 * after tail. */
@@ -2313,7 +2312,7 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
 	serial->parent->dev = tty_register_device(tty_drv, minor,
 					&serial->parent->interface->dev);
 	dev = serial->parent->dev;
-	dev->driver_data = serial->parent;
+	dev_set_drvdata(dev, serial->parent);
 	i = device_create_file(dev, &dev_attr_hsotype);
 
 	/* fill in specific data for later use */
@@ -2481,10 +2480,10 @@ static int add_net_device(struct hso_device *hso_dev)
 	return 0;
 }
 
-static int hso_radio_toggle(void *data, enum rfkill_state state)
+static int hso_rfkill_set_block(void *data, bool blocked)
 {
 	struct hso_device *hso_dev = data;
-	int enabled = (state == RFKILL_STATE_ON);
+	int enabled = !blocked;
 	int rv;
 
 	mutex_lock(&hso_dev->mutex);
@@ -2498,6 +2497,10 @@ static int hso_radio_toggle(void *data, enum rfkill_state state)
 	return rv;
 }
 
+static const struct rfkill_ops hso_rfkill_ops = {
+	.set_block = hso_rfkill_set_block,
+};
+
 /* Creates and sets up everything for rfkill */
 static void hso_create_rfkill(struct hso_device *hso_dev,
 			     struct usb_interface *interface)
@@ -2506,29 +2509,25 @@ static void hso_create_rfkill(struct hso_device *hso_dev,
 	struct device *dev = &hso_net->net->dev;
 	char *rfkn;
 
-	hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev,
-				 RFKILL_TYPE_WWAN);
-	if (!hso_net->rfkill) {
-		dev_err(dev, "%s - Out of memory\n", __func__);
-		return;
-	}
 	rfkn = kzalloc(20, GFP_KERNEL);
-	if (!rfkn) {
-		rfkill_free(hso_net->rfkill);
-		hso_net->rfkill = NULL;
+	if (!rfkn)
 		dev_err(dev, "%s - Out of memory\n", __func__);
-		return;
-	}
+
 	snprintf(rfkn, 20, "hso-%d",
 		 interface->altsetting->desc.bInterfaceNumber);
-	hso_net->rfkill->name = rfkn;
-	hso_net->rfkill->state = RFKILL_STATE_ON;
-	hso_net->rfkill->data = hso_dev;
-	hso_net->rfkill->toggle_radio = hso_radio_toggle;
+
+	hso_net->rfkill = rfkill_alloc(rfkn,
+				       &interface_to_usbdev(interface)->dev,
+				       RFKILL_TYPE_WWAN,
+				       &hso_rfkill_ops, hso_dev);
+	if (!hso_net->rfkill) {
+		dev_err(dev, "%s - Out of memory\n", __func__);
+		kfree(rfkn);
+		return;
+	}
 	if (rfkill_register(hso_net->rfkill) < 0) {
+		rfkill_destroy(hso_net->rfkill);
 		kfree(rfkn);
-		hso_net->rfkill->name = NULL;
-		rfkill_free(hso_net->rfkill);
 		hso_net->rfkill = NULL;
 		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
 		return;
@@ -3165,8 +3164,10 @@ static void hso_free_interface(struct usb_interface *interface)
 			hso_stop_net_device(network_table[i]);
 			cancel_work_sync(&network_table[i]->async_put_intf);
 			cancel_work_sync(&network_table[i]->async_get_intf);
-			if (rfk)
+			if (rfk) {
 				rfkill_unregister(rfk);
+				rfkill_destroy(rfk);
+			}
 			hso_free_net_device(network_table[i]);
 		}
 	}
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
new file mode 100644
index 00000000000..55cf7081de1
--- /dev/null
+++ b/drivers/net/usb/int51x1.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2009 Peter Holik
+ *
+ * Intellon usb PLC (Powerline Communications) usb net driver
+ *
+ * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
+ *
+ * Based on the work of Jan 'RedBully' Seiffert
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or.
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+#define INT51X1_VENDOR_ID	0x09e1
+#define INT51X1_PRODUCT_ID	0x5121
+
+#define INT51X1_HEADER_SIZE	2	/* 2 byte header */
+
+#define PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define PACKET_TYPE_DIRECTED		(1 << 2)
+#define PACKET_TYPE_BROADCAST		(1 << 3)
+#define PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+#define SET_ETHERNET_PACKET_FILTER	0x43
+
+static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+
+	if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
+		deverr(dev, "unexpected tiny rx frame");
+		return 0;
+	}
+
+	len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
+
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	int pack_len = skb->len;
+	int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	int need_tail = 0;
+	__le16 *len;
+
+	/* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */
+	if ((pack_with_header_len) < dev->maxpacket)
+		need_tail = dev->maxpacket - pack_with_header_len + 1;
+	/*
+	 * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
+	 * but we need to know ourself, because this would add to the length
+	 * we send down to the device...
+	 */
+	else if (!(pack_with_header_len % dev->maxpacket))
+		need_tail = 1;
+
+	if (!skb_cloned(skb) &&
+			(headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
+		if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
+			skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb,
+				INT51X1_HEADER_SIZE,
+				need_tail,
+				flags);
+		dev_kfree_skb_any(skb);
+		if (!skb2)
+			return NULL;
+		skb = skb2;
+	}
+
+	pack_len += need_tail;
+	pack_len &= 0x07ff;
+
+	len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE);
+	*len = cpu_to_le16(pack_len);
+
+	if(need_tail)
+		memset(__skb_put(skb, need_tail), 0, need_tail);
+
+	return skb;
+}
+
+static void int51x1_async_cmd_callback(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_warn(&urb->dev->dev, "async callback failed with %d\n", status);
+
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static void int51x1_set_multicast(struct net_device *netdev)
+{
+	struct usb_ctrlrequest *req;
+	int status;
+	struct urb *urb;
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* do not expect to see traffic of other PLCs */
+		filter |= PACKET_TYPE_PROMISCUOUS;
+		devinfo(dev, "promiscuous mode enabled");
+	} else if (netdev->mc_count ||
+		  (netdev->flags & IFF_ALLMULTI)) {
+		filter |= PACKET_TYPE_ALL_MULTICAST;
+		devdbg(dev, "receive all multicast enabled");
+	} else {
+		/* ~PROMISCUOUS, ~MULTICAST */
+		devdbg(dev, "receive own packets only");
+	}
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		devwarn(dev, "Error allocating URB");
+		return;
+	}
+
+	req = kmalloc(sizeof(*req), GFP_ATOMIC);
+	if (!req) {
+		devwarn(dev, "Error allocating control msg");
+		goto out;
+	}
+
+	req->bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+	req->bRequest = SET_ETHERNET_PACKET_FILTER;
+	req->wValue = cpu_to_le16(filter);
+	req->wIndex = 0;
+	req->wLength = 0;
+
+	usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0),
+		(void *)req, NULL, 0,
+		int51x1_async_cmd_callback,
+		(void *)req);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status < 0) {
+		devwarn(dev, "Error submitting control msg, sts=%d", status);
+		goto out1;
+	}
+	return;
+out1:
+	kfree(req);
+out:
+	usb_free_urb(urb);
+}
+
+static const struct net_device_ops int51x1_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_multicast_list	= int51x1_set_multicast,
+};
+
+static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = usbnet_get_ethernet_addr(dev, 3);
+
+	if (status)
+		return status;
+
+	dev->net->hard_header_len += INT51X1_HEADER_SIZE;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->netdev_ops = &int51x1_netdev_ops;
+
+	return usbnet_get_endpoints(dev, intf);
+}
+
+static const struct driver_info int51x1_info = {
+	.description = "Intellon usb powerline adapter",
+	.bind        = int51x1_bind,
+	.rx_fixup    = int51x1_rx_fixup,
+	.tx_fixup    = int51x1_tx_fixup,
+	.in          = 1,
+	.out         = 2,
+	.flags       = FLAG_ETHER,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
+		.driver_info = (unsigned long) &int51x1_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver int51x1_driver = {
+	.name       = "int51x1",
+	.id_table   = products,
+	.probe      = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend    = usbnet_suspend,
+	.resume     = usbnet_resume,
+};
+
+static int __init int51x1_init(void)
+{
+	return usb_register(&int51x1_driver);
+}
+module_init(int51x1_init);
+
+static void __exit int51x1_exit(void)
+{
+	usb_deregister(&int51x1_driver);
+}
+module_exit(int51x1_exit);
+
+MODULE_AUTHOR("Peter Holik");
+MODULE_DESCRIPTION("Intellon usb powerline adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 3d0d0b0b37c..e0131478971 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -31,7 +31,6 @@
  ****************************************************************/
 
 /* TODO:
- * Fix in_interrupt() problem
  * Develop test procedures for USB net interfaces
  * Run test procedures
  * Fix bugs from previous two steps
@@ -606,14 +605,30 @@ static void kaweth_usb_receive(struct urb *urb)
 
 	struct sk_buff *skb;
 
-	if(unlikely(status == -ECONNRESET || status == -ESHUTDOWN))
-	/* we are killed - set a flag and wake the disconnect handler */
-	{
+	if (unlikely(status == -EPIPE)) {
+		kaweth->stats.rx_errors++;
 		kaweth->end = 1;
 		wake_up(&kaweth->term_wait);
+		dbg("Status was -EPIPE.");
 		return;
 	}
-
+	if (unlikely(status == -ECONNRESET || status == -ESHUTDOWN)) {
+		/* we are killed - set a flag and wake the disconnect handler */
+		kaweth->end = 1;
+		wake_up(&kaweth->term_wait);
+		dbg("Status was -ECONNRESET or -ESHUTDOWN.");
+		return;
+	}
+	if (unlikely(status == -EPROTO || status == -ETIME ||
+		     status == -EILSEQ)) {
+		kaweth->stats.rx_errors++;
+		dbg("Status was -EPROTO, -ETIME, or -EILSEQ.");
+		return;
+	}
+	if (unlikely(status == -EOVERFLOW)) {
+		kaweth->stats.rx_errors++;
+		dbg("Status was -EOVERFLOW.");
+	}
 	spin_lock(&kaweth->device_lock);
 	if (IS_BLOCKED(kaweth->status)) {
 		spin_unlock(&kaweth->device_lock);
@@ -883,13 +898,16 @@ static void kaweth_set_rx_mode(struct net_device *net)
  ****************************************************************/
 static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
 {
+	int result;
 	__u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
+
 	kaweth->packet_filter_bitmap = 0;
 	if (packet_filter_bitmap == 0)
 		return;
 
-	{
-	int result;
+	if (in_interrupt())
+		return;
+
 	result = kaweth_control(kaweth,
 				usb_sndctrlpipe(kaweth->dev, 0),
 				KAWETH_COMMAND_SET_PACKET_FILTER,
@@ -906,7 +924,6 @@ static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
 	else {
 		dbg("Set Rx mode to %d", packet_filter_bitmap);
 	}
-	}
 }
 
 /****************************************************************
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index f9fb454ffa8..fcc6fa0905d 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -221,7 +221,8 @@ static void ctrl_callback(struct urb *urb)
 	case -ENOENT:
 		break;
 	default:
-		dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status);
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status);
 	}
 	dev = urb->context;
 	clear_bit(RX_REG_SET, &dev->flags);
@@ -442,10 +443,12 @@ static void read_bulk_callback(struct urb *urb)
 	case -ENOENT:
 		return;	/* the urb is in unlink state */
 	case -ETIME:
-		dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
 		goto goon;
 	default:
-		dev_warn(&urb->dev->dev, "Rx status %d\n", status);
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "Rx status %d\n", status);
 		goto goon;
 	}
 
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 5a7283372b5..89a91f8c22d 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1134,7 +1134,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			if (skb->len == size) {
 				if (pdata->use_rx_csum)
 					smsc95xx_rx_csum_offload(skb);
-
+				skb_trim(skb, skb->len - 4); /* remove fcs */
 				skb->truesize = size + sizeof(struct sk_buff);
 
 				return 1;
@@ -1152,7 +1152,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 			if (pdata->use_rx_csum)
 				smsc95xx_rx_csum_offload(ax_skb);
-
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
 			ax_skb->truesize = size + sizeof(struct sk_buff);
 
 			usbnet_skb_return(dev, ax_skb);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f3a2fce6166..22c0585a031 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -37,6 +37,7 @@
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/ctype.h>
 #include <linux/ethtool.h>
 #include <linux/workqueue.h>
 #include <linux/mii.h>
@@ -156,6 +157,36 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
 }
 EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
 
+static u8 nibble(unsigned char c)
+{
+	if (likely(isdigit(c)))
+		return c - '0';
+	c = toupper(c);
+	if (likely(isxdigit(c)))
+		return 10 + c - 'A';
+	return 0;
+}
+
+int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
+{
+	int 		tmp, i;
+	unsigned char	buf [13];
+
+	tmp = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
+	if (tmp != 12) {
+		dev_dbg(&dev->udev->dev,
+			"bad MAC string %d fetch, %d\n", iMACAddress, tmp);
+		if (tmp >= 0)
+			tmp = -EINVAL;
+		return tmp;
+	}
+	for (i = tmp = 0; i < 6; i++, tmp += 2)
+		dev->net->dev_addr [i] =
+			(nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
+
 static void intr_complete (struct urb *urb);
 
 static int init_status (struct usbnet *dev, struct usb_interface *intf)
@@ -398,7 +429,7 @@ static void rx_complete (struct urb *urb)
 
 	/* stalls need manual reset. this is rare ... except that
 	 * when going through USB 2.0 TTs, unplug appears this way.
-	 * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
@@ -1185,12 +1216,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 #endif
 
 	net->netdev_ops = &usbnet_netdev_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	net->hard_start_xmit = usbnet_start_xmit;
-	net->open = usbnet_open;
-	net->stop = usbnet_stop;
-	net->tx_timeout = usbnet_tx_timeout;
-#endif
 	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
 	net->ethtool_ops = &usbnet_ethtool_ops;
 
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 8e56fcf0a0e..87197dd9c78 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -176,8 +176,6 @@ static int veth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (dev->features & NETIF_F_NO_CSUM)
 		skb->ip_summed = rcv_priv->ip_summed;
 
-	dst_release(skb->dst);
-	skb->dst = NULL;
 	skb->mark = 0;
 	secpath_reset(skb);
 	nf_reset(skb);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 45daba726b6..d3489a3c4c0 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -388,7 +388,6 @@ struct rhine_private {
 	long pioaddr;
 	struct net_device *dev;
 	struct napi_struct napi;
-	struct net_device_stats stats;
 	spinlock_t lock;
 
 	/* Frequently used values: keep some adjacent for cache effect. */
@@ -1209,7 +1208,7 @@ static void rhine_tx_timeout(struct net_device *dev)
 	enable_irq(rp->pdev->irq);
 
 	dev->trans_start = jiffies;
-	rp->stats.tx_errors++;
+	dev->stats.tx_errors++;
 	netif_wake_queue(dev);
 }
 
@@ -1237,7 +1236,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 			/* packet too long, drop it */
 			dev_kfree_skb(skb);
 			rp->tx_skbuff[entry] = NULL;
-			rp->stats.tx_dropped++;
+			dev->stats.tx_dropped++;
 			return 0;
 		}
 
@@ -1378,29 +1377,33 @@ static void rhine_tx(struct net_device *dev)
 				printk(KERN_DEBUG "%s: Transmit error, "
 				       "Tx status %8.8x.\n",
 				       dev->name, txstatus);
-			rp->stats.tx_errors++;
-			if (txstatus & 0x0400) rp->stats.tx_carrier_errors++;
-			if (txstatus & 0x0200) rp->stats.tx_window_errors++;
-			if (txstatus & 0x0100) rp->stats.tx_aborted_errors++;
-			if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++;
+			dev->stats.tx_errors++;
+			if (txstatus & 0x0400)
+				dev->stats.tx_carrier_errors++;
+			if (txstatus & 0x0200)
+				dev->stats.tx_window_errors++;
+			if (txstatus & 0x0100)
+				dev->stats.tx_aborted_errors++;
+			if (txstatus & 0x0080)
+				dev->stats.tx_heartbeat_errors++;
 			if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
 			    (txstatus & 0x0800) || (txstatus & 0x1000)) {
-				rp->stats.tx_fifo_errors++;
+				dev->stats.tx_fifo_errors++;
 				rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
 				break; /* Keep the skb - we try again */
 			}
 			/* Transmitter restarted in 'abnormal' handler. */
 		} else {
 			if (rp->quirks & rqRhineI)
-				rp->stats.collisions += (txstatus >> 3) & 0x0F;
+				dev->stats.collisions += (txstatus >> 3) & 0x0F;
 			else
-				rp->stats.collisions += txstatus & 0x0F;
+				dev->stats.collisions += txstatus & 0x0F;
 			if (debug > 6)
 				printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
 				       (txstatus >> 3) & 0xF,
 				       txstatus & 0xF);
-			rp->stats.tx_bytes += rp->tx_skbuff[entry]->len;
-			rp->stats.tx_packets++;
+			dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
+			dev->stats.tx_packets++;
 		}
 		/* Free the original skb. */
 		if (rp->tx_skbuff_dma[entry]) {
@@ -1455,21 +1458,24 @@ static int rhine_rx(struct net_device *dev, int limit)
 				printk(KERN_WARNING "%s: Oversized Ethernet "
 				       "frame %p vs %p.\n", dev->name,
 				       rp->rx_head_desc, &rp->rx_ring[entry]);
-				rp->stats.rx_length_errors++;
+				dev->stats.rx_length_errors++;
 			} else if (desc_status & RxErr) {
 				/* There was a error. */
 				if (debug > 2)
 					printk(KERN_DEBUG "rhine_rx() Rx "
 					       "error was %8.8x.\n",
 					       desc_status);
-				rp->stats.rx_errors++;
-				if (desc_status & 0x0030) rp->stats.rx_length_errors++;
-				if (desc_status & 0x0048) rp->stats.rx_fifo_errors++;
-				if (desc_status & 0x0004) rp->stats.rx_frame_errors++;
+				dev->stats.rx_errors++;
+				if (desc_status & 0x0030)
+					dev->stats.rx_length_errors++;
+				if (desc_status & 0x0048)
+					dev->stats.rx_fifo_errors++;
+				if (desc_status & 0x0004)
+					dev->stats.rx_frame_errors++;
 				if (desc_status & 0x0002) {
 					/* this can also be updated outside the interrupt handler */
 					spin_lock(&rp->lock);
-					rp->stats.rx_crc_errors++;
+					dev->stats.rx_crc_errors++;
 					spin_unlock(&rp->lock);
 				}
 			}
@@ -1513,8 +1519,8 @@ static int rhine_rx(struct net_device *dev, int limit)
 			}
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_receive_skb(skb);
-			rp->stats.rx_bytes += pkt_len;
-			rp->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
+			dev->stats.rx_packets++;
 		}
 		entry = (++rp->cur_rx) % RX_RING_SIZE;
 		rp->rx_head_desc = &rp->rx_ring[entry];
@@ -1599,8 +1605,8 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	if (intr_status & IntrLinkChange)
 		rhine_check_media(dev, 0);
 	if (intr_status & IntrStatsMax) {
-		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
-		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+		dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+		dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
 		clear_tally_counters(ioaddr);
 	}
 	if (intr_status & IntrTxAborted) {
@@ -1654,12 +1660,12 @@ static struct net_device_stats *rhine_get_stats(struct net_device *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rp->lock, flags);
-	rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
-	rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+	dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+	dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
 	clear_tally_counters(ioaddr);
 	spin_unlock_irqrestore(&rp->lock, flags);
 
-	return &rp->stats;
+	return &dev->stats;
 }
 
 static void rhine_set_rx_mode(struct net_device *dev)
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 754a4b182c1..e2a7725e567 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1385,7 +1385,7 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 
 static int velocity_rx_srv(struct velocity_info *vptr, int status)
 {
-	struct net_device_stats *stats = &vptr->stats;
+	struct net_device_stats *stats = &vptr->dev->stats;
 	int rd_curr = vptr->rx.curr;
 	int works = 0;
 
@@ -1519,7 +1519,7 @@ static inline void velocity_iph_realign(struct velocity_info *vptr,
 static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 {
 	void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
-	struct net_device_stats *stats = &vptr->stats;
+	struct net_device_stats *stats = &vptr->dev->stats;
 	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
 	struct rx_desc *rd = &(vptr->rx.ring[idx]);
 	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
@@ -1532,7 +1532,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 	}
 
 	if (rd->rdesc0.RSR & RSR_MAR)
-		vptr->stats.multicast++;
+		stats->multicast++;
 
 	skb = rd_info->skb;
 
@@ -1634,7 +1634,7 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
 	int idx;
 	int works = 0;
 	struct velocity_td_info *tdinfo;
-	struct net_device_stats *stats = &vptr->stats;
+	struct net_device_stats *stats = &vptr->dev->stats;
 
 	for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
 		for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
@@ -2324,22 +2324,22 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev)
 
 	/* If the hardware is down, don't touch MII */
 	if(!netif_running(dev))
-		return &vptr->stats;
+		return &dev->stats;
 
 	spin_lock_irq(&vptr->lock);
 	velocity_update_hw_mibs(vptr);
 	spin_unlock_irq(&vptr->lock);
 
-	vptr->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
-	vptr->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
-	vptr->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+	dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+	dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+	dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
 
 //  unsigned long   rx_dropped;     /* no space in linux buffers    */
-	vptr->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+	dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
 	/* detailed rx_errors: */
 //  unsigned long   rx_length_errors;
 //  unsigned long   rx_over_errors;     /* receiver ring buff overflow  */
-	vptr->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+	dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
 //  unsigned long   rx_frame_errors;    /* recv'd frame alignment error */
 //  unsigned long   rx_fifo_errors;     /* recv'r fifo overrun      */
 //  unsigned long   rx_missed_errors;   /* receiver missed packet   */
@@ -2347,7 +2347,7 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev)
 	/* detailed tx_errors */
 //  unsigned long   tx_fifo_errors;
 
-	return &vptr->stats;
+	return &dev->stats;
 }
 
 
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index ea43e1832af..4cd3f6c9737 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1503,7 +1503,6 @@ struct velocity_info {
 
 	struct pci_dev *pdev;
 	struct net_device *dev;
-	struct net_device_stats stats;
 
 	struct vlan_group    *vlgrp;
 	u8 ip_addr[4];
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 4d1d47953fc..52198f6797a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -283,10 +283,11 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi)
 	for (;;) {
 		struct virtio_net_hdr *hdr;
 
-		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN);
+		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
 		if (unlikely(!skb))
 			break;
 
+		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, MAX_PACKET_LEN);
 
 		hdr = skb_vnet_hdr(skb);
@@ -470,7 +471,7 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 	}
 
 	if (skb_is_gso(skb)) {
-		hdr->hdr_len = skb_transport_header(skb) - skb->data;
+		hdr->hdr_len = skb_headlen(skb);
 		hdr->gso_size = skb_shinfo(skb)->gso_size;
 		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
 			hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
@@ -622,12 +623,9 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
 	unsigned int tmp;
 	int i;
 
-	if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
-		BUG();  /* Caller should know better */
-		return false;
-	}
-
-	BUG_ON(out + in > VIRTNET_SEND_COMMAND_SG_MAX);
+	/* Caller should know better */
+	BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ||
+		(out + in > VIRTNET_SEND_COMMAND_SG_MAX));
 
 	out++; /* Add header */
 	in++; /* Add return status */
@@ -642,8 +640,7 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
 		sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
 	sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
 
-	if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
-		BUG();
+	BUG_ON(vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi));
 
 	vi->cvq->vq_ops->kick(vi->cvq);
 
@@ -684,6 +681,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	u8 promisc, allmulti;
 	struct virtio_net_ctrl_mac *mac_data;
 	struct dev_addr_list *addr;
+	struct netdev_hw_addr *ha;
 	void *buf;
 	int i;
 
@@ -722,9 +720,9 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 
 	/* Store the unicast list and count in the front of the buffer */
 	mac_data->entries = dev->uc_count;
-	addr = dev->uc_list;
-	for (i = 0; i < dev->uc_count; i++, addr = addr->next)
-		memcpy(&mac_data->macs[i][0], addr->da_addr, ETH_ALEN);
+	i = 0;
+	list_for_each_entry(ha, &dev->uc_list, list)
+		memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN);
 
 	sg_set_buf(&sg[0], mac_data,
 		   sizeof(mac_data->entries) + (dev->uc_count * ETH_ALEN));
@@ -845,6 +843,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 	int err;
 	struct net_device *dev;
 	struct virtnet_info *vi;
+	struct virtqueue *vqs[3];
+	vq_callback_t *callbacks[] = { skb_recv_done, skb_xmit_done, NULL};
+	const char *names[] = { "input", "output", "control" };
+	int nvqs;
 
 	/* Allocate ourselves a network device with room for our info */
 	dev = alloc_etherdev(sizeof(struct virtnet_info));
@@ -905,25 +907,19 @@ static int virtnet_probe(struct virtio_device *vdev)
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
 		vi->mergeable_rx_bufs = true;
 
-	/* We expect two virtqueues, receive then send. */
-	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
-	if (IS_ERR(vi->rvq)) {
-		err = PTR_ERR(vi->rvq);
+	/* We expect two virtqueues, receive then send,
+	 * and optionally control. */
+	nvqs = virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ? 3 : 2;
+
+	err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names);
+	if (err)
 		goto free;
-	}
 
-	vi->svq = vdev->config->find_vq(vdev, 1, skb_xmit_done);
-	if (IS_ERR(vi->svq)) {
-		err = PTR_ERR(vi->svq);
-		goto free_recv;
-	}
+	vi->rvq = vqs[0];
+	vi->svq = vqs[1];
 
 	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
-		vi->cvq = vdev->config->find_vq(vdev, 2, NULL);
-		if (IS_ERR(vi->cvq)) {
-			err = PTR_ERR(vi->svq);
-			goto free_send;
-		}
+		vi->cvq = vqs[2];
 
 		if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
 			dev->features |= NETIF_F_HW_VLAN_FILTER;
@@ -941,7 +937,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	err = register_netdev(dev);
 	if (err) {
 		pr_debug("virtio_net: registering device failed\n");
-		goto free_ctrl;
+		goto free_vqs;
 	}
 
 	/* Last of all, set up some receive buffers. */
@@ -962,13 +958,8 @@ static int virtnet_probe(struct virtio_device *vdev)
 
 unregister:
 	unregister_netdev(dev);
-free_ctrl:
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
-		vdev->config->del_vq(vi->cvq);
-free_send:
-	vdev->config->del_vq(vi->svq);
-free_recv:
-	vdev->config->del_vq(vi->rvq);
+free_vqs:
+	vdev->config->del_vqs(vdev);
 free:
 	free_netdev(dev);
 	return err;
@@ -994,12 +985,10 @@ static void virtnet_remove(struct virtio_device *vdev)
 
 	BUG_ON(vi->num != 0);
 
-	vdev->config->del_vq(vi->svq);
-	vdev->config->del_vq(vi->rvq);
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
-		vdev->config->del_vq(vi->cvq);
 	unregister_netdev(vi->dev);
 
+	vdev->config->del_vqs(vi->vdev);
+
 	while (vi->pages)
 		__free_pages(get_a_page(vi, GFP_KERNEL), 0);
 
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 6b41c884a33..26cde573af4 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -1884,17 +1884,13 @@ void __vxge_hw_mempool_destroy(struct vxge_hw_mempool *mempool)
 				mempool->memblock_size, dma_object);
 	}
 
-	if (mempool->items_arr)
-		vfree(mempool->items_arr);
+	vfree(mempool->items_arr);
 
-	if (mempool->memblocks_dma_arr)
-		vfree(mempool->memblocks_dma_arr);
+	vfree(mempool->memblocks_dma_arr);
 
-	if (mempool->memblocks_priv_arr)
-		vfree(mempool->memblocks_priv_arr);
+	vfree(mempool->memblocks_priv_arr);
 
-	if (mempool->memblocks_arr)
-		vfree(mempool->memblocks_arr);
+	vfree(mempool->memblocks_arr);
 
 	vfree(mempool);
 }
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index b7f08f3e524..6c838b3e063 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -677,7 +677,7 @@ vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
 	return VXGE_HW_OK;
 }
 
-/* select a vpath to trasmit the packet */
+/* select a vpath to transmit the packet */
 static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb,
 	int *do_lock)
 {
@@ -992,7 +992,9 @@ vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 					VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN);
 
 	vxge_hw_fifo_txdl_post(fifo_hw, dtr);
-	dev->trans_start = jiffies;
+#ifdef NETIF_F_LLTX
+	dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+#endif
 	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 
 	VXGE_COMPLETE_VPATH_TX(fifo);
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index c2eeac4125f..370f55cbbad 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -1923,7 +1923,7 @@ enum vxge_hw_status __vxge_hw_vpath_alarm_process(
 	if (vpath == NULL) {
 		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_UNKNOWN,
 			alarm_event);
-		goto out;
+		goto out2;
 	}
 
 	hldev = vpath->hldev;
@@ -2161,7 +2161,7 @@ enum vxge_hw_status __vxge_hw_vpath_alarm_process(
 	}
 out:
 	hldev->stats.sw_dev_err_stats.vpath_alarms++;
-
+out2:
 	if ((alarm_event == VXGE_HW_EVENT_ALARM_CLEARED) ||
 		(alarm_event == VXGE_HW_EVENT_UNKNOWN))
 		return VXGE_HW_OK;
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index 35dea3bea95..f525f9fe74d 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -615,7 +615,7 @@ static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
 		case WAN_DISCONNECTED:
 			if (cycx_x25_chan_connect(dev)) {
 				netif_stop_queue(dev);
-				return -EBUSY;
+				return NETDEV_TX_BUSY;
 			}
 			/* fall thru */
 		case WAN_CONNECTED:
@@ -624,7 +624,7 @@ static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
 			netif_stop_queue(dev);
 
 			if (cycx_x25_chan_send(dev, skb))
-				return -EBUSY;
+				return NETDEV_TX_BUSY;
 
 			break;
 		default:
@@ -656,7 +656,7 @@ static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
 		if (cycx_x25_chan_send(dev, skb)) {
 			/* prepare for future retransmissions */
 			skb_push(skb, 1);
-			return -EBUSY;
+			return NETDEV_TX_BUSY;
 		}
 	}
 
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index e8d155c3e59..2fa275a58f9 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -205,15 +205,15 @@ static int dlci_transmit(struct sk_buff *skb, struct net_device *dev)
 	{
 		case DLCI_RET_OK:
 			dev->stats.tx_packets++;
-			ret = 0;
+			ret = NETDEV_TX_OK;
 			break;
 			case DLCI_RET_ERR:
 			dev->stats.tx_errors++;
-			ret = 0;
+			ret = NETDEV_TX_OK;
 			break;
 			case DLCI_RET_DROP:
 			dev->stats.tx_dropped++;
-			ret = 1;
+			ret = NETDEV_TX_BUSY;
 			break;
 	}
 	/* Alan Cox recommends always returning 0, and always freeing the packet */
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 80053010109..bfa0161a02d 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1054,6 +1054,7 @@ static void pvc_setup(struct net_device *dev)
 	dev->flags = IFF_POINTOPOINT;
 	dev->hard_header_len = 10;
 	dev->addr_len = 2;
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 }
 
 static const struct net_device_ops pvc_ops = {
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5d6aa..bb719b6114c 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -731,8 +732,8 @@ static int hss_hdlc_poll(struct napi_struct *napi, int budget)
 		dma_unmap_single(&dev->dev, desc->data,
 				 RX_SIZE, DMA_FROM_DEVICE);
 #else
-		dma_sync_single(&dev->dev, desc->data,
-				RX_SIZE, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(&dev->dev, desc->data,
+					RX_SIZE, DMA_FROM_DEVICE);
 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
 			      ALIGN(desc->pkt_len, 4) / 4);
 #endif
@@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev)
 		free_buffer_irq(port->tx_buff_tab[n_desc]);
 		port->tx_buff_tab[n_desc] = NULL;
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq,
 			       tx_desc_phys(port, n_desc), desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
 			       " ready\n", dev->name);
@@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
 			       dev->name);
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index c23fde0c034..79dabc557bd 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -225,6 +225,7 @@ static char rcsid[] =
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/spinlock.h>
 #include <linux/if.h>
 #include <net/arp.h>
@@ -3246,6 +3247,16 @@ static inline void show_version(void)
 		rcsvers, rcsdate, __DATE__, __TIME__);
 }				/* show_version */
 
+static const struct net_device_ops cpc_netdev_ops = {
+	.ndo_open		= cpc_open,
+	.ndo_stop		= cpc_close,
+	.ndo_tx_timeout		= cpc_tx_timeout,
+	.ndo_set_mac_address	= NULL,
+	.ndo_change_mtu		= cpc_change_mtu,
+	.ndo_do_ioctl		= cpc_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static void cpc_init_card(pc300_t * card)
 {
 	int i, devcount = 0;
@@ -3357,18 +3368,11 @@ static void cpc_init_card(pc300_t * card)
 		dev->mem_start = card->hw.ramphys;
 		dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1;
 		dev->irq = card->hw.irq;
-		dev->init = NULL;
 		dev->tx_queue_len = PC300_TX_QUEUE_LEN;
 		dev->mtu = PC300_DEF_MTU;
 
-		dev->open = cpc_open;
-		dev->stop = cpc_close;
-		dev->tx_timeout = cpc_tx_timeout;
+		dev->netdev_ops = &cpc_netdev_ops;
 		dev->watchdog_timeo = PC300_TX_TIMEOUT;
-		dev->set_multicast_list = NULL;
-		dev->set_mac_address = NULL;
-		dev->change_mtu = cpc_change_mtu;
-		dev->do_ioctl = cpc_ioctl;
 
 		if (register_hdlc_device(dev) == 0) {
 			printk("%s: Cyclades-PC300/", dev->name);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index f4211fe0f44..3fb9dbc88a1 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -469,7 +469,7 @@ sbni_start_xmit( struct sk_buff  *skb,  struct net_device  *dev )
 		}
 	}
 
-	return  1;
+	return NETDEV_TX_BUSY;
 }
 
 #else	/* CONFIG_SBNI_MULTILINE */
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 8130b79a8a9..e4ad7b6b52e 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -283,7 +283,7 @@ static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 		netif_stop_queue(dev);
 		spin_unlock_irq(&port->lock);
-		return 1;       /* request packet to be queued */
+		return NETDEV_TX_BUSY;       /* request packet to be queued */
 	}
 
 #ifdef DEBUG_PKT
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index b3cadb626fe..07308686dbc 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -292,8 +292,6 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
 
 	d_fnstart(3, dev, "(i2400m %p ss %p [%u])\n", i2400m, ss, i2400m_state);
 
-	if (unlikely(i2400m->ready == 0))	/* act if up */
-		goto out;
 	if (i2400m->state != i2400m_state) {
 		i2400m->state = i2400m_state;
 		wake_up_all(&i2400m->state_wq);
@@ -341,7 +339,6 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
 		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
 		break;
 	};
-out:
 	d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",
 		i2400m, ss, i2400m_state);
 }
@@ -372,8 +369,6 @@ void i2400m_report_tlv_media_status(struct i2400m *i2400m,
 
 	d_fnstart(3, dev, "(i2400m %p ms %p [%u])\n", i2400m, ms, status);
 
-	if (unlikely(i2400m->ready == 0))	/* act if up */
-		goto out;
 	switch (status) {
 	case I2400M_MEDIA_STATUS_LINK_UP:
 		netif_carrier_on(net_dev);
@@ -393,14 +388,59 @@ void i2400m_report_tlv_media_status(struct i2400m *i2400m,
 		dev_err(dev, "HW BUG? unknown media status %u\n",
 			status);
 	};
-out:
 	d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n",
 		i2400m, ms, status);
 }
 
 
 /*
- * Parse a 'state report' and extract carrier on/off information
+ * Process a TLV from a 'state report'
+ *
+ * @i2400m: device descriptor
+ * @tlv: pointer to the TLV header; it has been already validated for
+ *     consistent size.
+ * @tag: for error messages
+ *
+ * Act on the TLVs from a 'state report'.
+ */
+static
+void i2400m_report_state_parse_tlv(struct i2400m *i2400m,
+				   const struct i2400m_tlv_hdr *tlv,
+				   const char *tag)
+{
+	struct device *dev = i2400m_dev(i2400m);
+	const struct i2400m_tlv_media_status *ms;
+	const struct i2400m_tlv_system_state *ss;
+	const struct i2400m_tlv_rf_switches_status *rfss;
+
+	if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE, sizeof(*ss))) {
+		ss = container_of(tlv, typeof(*ss), hdr);
+		d_printf(2, dev, "%s: system state TLV "
+			 "found (0x%04x), state 0x%08x\n",
+			 tag, I2400M_TLV_SYSTEM_STATE,
+			 le32_to_cpu(ss->state));
+		i2400m_report_tlv_system_state(i2400m, ss);
+	}
+	if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS, sizeof(*rfss))) {
+		rfss = container_of(tlv, typeof(*rfss), hdr);
+		d_printf(2, dev, "%s: RF status TLV "
+			 "found (0x%04x), sw 0x%02x hw 0x%02x\n",
+			 tag, I2400M_TLV_RF_STATUS,
+			 le32_to_cpu(rfss->sw_rf_switch),
+			 le32_to_cpu(rfss->hw_rf_switch));
+		i2400m_report_tlv_rf_switches_status(i2400m, rfss);
+	}
+	if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS, sizeof(*ms))) {
+		ms = container_of(tlv, typeof(*ms), hdr);
+		d_printf(2, dev, "%s: Media Status TLV: %u\n",
+			 tag, le32_to_cpu(ms->media_status));
+		i2400m_report_tlv_media_status(i2400m, ms);
+	}
+}
+
+
+/*
+ * Parse a 'state report' and extract information
  *
  * @i2400m: device descriptor
  * @l3l4_hdr: pointer to message; it has been already validated for
@@ -409,13 +449,7 @@ out:
  *        declaration is assumed to be congruent with @size (as in
  *        sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
  *
- * Extract from the report state the system state TLV and infer from
- * there if we have a carrier or not. Update our local state and tell
- * netdev.
- *
- * When setting the carrier, it's fine to set OFF twice (for example),
- * as netif_carrier_off() will not generate two OFF events (just on
- * the transitions).
+ * Walk over the TLVs in a report state and act on them.
  */
 static
 void i2400m_report_state_hook(struct i2400m *i2400m,
@@ -424,9 +458,6 @@ void i2400m_report_state_hook(struct i2400m *i2400m,
 {
 	struct device *dev = i2400m_dev(i2400m);
 	const struct i2400m_tlv_hdr *tlv;
-	const struct i2400m_tlv_system_state *ss;
-	const struct i2400m_tlv_rf_switches_status *rfss;
-	const struct i2400m_tlv_media_status *ms;
 	size_t tlv_size = le16_to_cpu(l3l4_hdr->length);
 
 	d_fnstart(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s)\n",
@@ -434,34 +465,8 @@ void i2400m_report_state_hook(struct i2400m *i2400m,
 	tlv = NULL;
 
 	while ((tlv = i2400m_tlv_buffer_walk(i2400m, &l3l4_hdr->pl,
-					     tlv_size, tlv))) {
-		if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE,
-					  sizeof(*ss))) {
-			ss = container_of(tlv, typeof(*ss), hdr);
-			d_printf(2, dev, "%s: system state TLV "
-				 "found (0x%04x), state 0x%08x\n",
-				 tag, I2400M_TLV_SYSTEM_STATE,
-				 le32_to_cpu(ss->state));
-			i2400m_report_tlv_system_state(i2400m, ss);
-		}
-		if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS,
-					  sizeof(*rfss))) {
-			rfss = container_of(tlv, typeof(*rfss), hdr);
-			d_printf(2, dev, "%s: RF status TLV "
-				 "found (0x%04x), sw 0x%02x hw 0x%02x\n",
-				 tag, I2400M_TLV_RF_STATUS,
-				 le32_to_cpu(rfss->sw_rf_switch),
-				 le32_to_cpu(rfss->hw_rf_switch));
-			i2400m_report_tlv_rf_switches_status(i2400m, rfss);
-		}
-		if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS,
-					  sizeof(*ms))) {
-			ms = container_of(tlv, typeof(*ms), hdr);
-			d_printf(2, dev, "%s: Media Status TLV: %u\n",
-				 tag, le32_to_cpu(ms->media_status));
-			i2400m_report_tlv_media_status(i2400m, ms);
-		}
-	}
+					     tlv_size, tlv)))
+		i2400m_report_state_parse_tlv(i2400m, tlv, tag);
 	d_fnend(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s) = void\n",
 		i2400m, l3l4_hdr, size, tag);
 }
@@ -500,8 +505,15 @@ void i2400m_report_hook(struct i2400m *i2400m,
 	 * it. */
 	case I2400M_MT_REPORT_POWERSAVE_READY:	/* zzzzz */
 		if (l3l4_hdr->status == cpu_to_le16(I2400M_MS_DONE_OK)) {
-			d_printf(1, dev, "ready for powersave, requesting\n");
-			i2400m_cmd_enter_powersave(i2400m);
+			if (i2400m_power_save_disabled)
+				d_printf(1, dev, "ready for powersave, "
+					 "not requesting (disabled by module "
+					 "parameter)\n");
+			else {
+				d_printf(1, dev, "ready for powersave, "
+					 "requesting\n");
+				i2400m_cmd_enter_powersave(i2400m);
+			}
 		}
 		break;
 	};
@@ -683,8 +695,9 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
 	d_fnstart(3, dev, "(i2400m %p buf %p len %zu)\n",
 		  i2400m, buf, buf_len);
 
+	rmb();		/* Make sure we see what i2400m_dev_reset_handle() */
 	if (i2400m->boot_mode)
-		return ERR_PTR(-ENODEV);
+		return ERR_PTR(-EL3RST);
 
 	msg_l3l4_hdr = buf;
 	/* Check msg & payload consistency */
@@ -721,6 +734,8 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
 		ack_timeout = HZ;
 	};
 
+	if (unlikely(i2400m->trace_msg_from_user))
+		wimax_msg(&i2400m->wimax_dev, "echo", buf, buf_len, GFP_KERNEL);
 	/* The RX path in rx.c will put any response for this message
 	 * in i2400m->ack_skb and wake us up. If we cancel the wait,
 	 * we need to change the value of i2400m->ack_skb to something
@@ -755,6 +770,9 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
 	ack_l3l4_hdr = wimax_msg_data_len(ack_skb, &ack_len);
 
 	/* Check the ack and deliver it if it is ok */
+	if (unlikely(i2400m->trace_msg_from_user))
+		wimax_msg(&i2400m->wimax_dev, "echo",
+			  ack_l3l4_hdr, ack_len, GFP_KERNEL);
 	result = i2400m_msg_size_check(i2400m, ack_l3l4_hdr, ack_len);
 	if (result < 0) {
 		dev_err(dev, "HW BUG? reply to message 0x%04x: %d\n",
@@ -1379,16 +1397,16 @@ error:
  *
  * @i2400m: device descriptor
  *
- * Gracefully stops the device, moving it to the lowest power
- * consumption state possible.
+ * Release resources acquired during the running of the device; in
+ * theory, should also tell the device to go to sleep, switch off the
+ * radio, all that, but at this point, in most cases (driver
+ * disconnection, reset handling) we can't even talk to the device.
  */
 void i2400m_dev_shutdown(struct i2400m *i2400m)
 {
-	int result = -ENODEV;
 	struct device *dev = i2400m_dev(i2400m);
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
-	result = i2400m->bus_reset(i2400m, I2400M_RT_WARM);
-	d_fnend(3, dev, "(i2400m %p) = void [%d]\n", i2400m, result);
+	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 	return;
 }
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 07a54bad237..304f0443ca4 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -62,6 +62,7 @@
  *   unregister_netdev()
  */
 #include "i2400m.h"
+#include <linux/etherdevice.h>
 #include <linux/wimax/i2400m.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -81,6 +82,14 @@ module_param_named(rx_reorder_disabled, i2400m_rx_reorder_disabled, int, 0644);
 MODULE_PARM_DESC(rx_reorder_disabled,
 		 "If true, RX reordering will be disabled.");
 
+int i2400m_power_save_disabled;	/* 0 (power saving enabled) by default */
+module_param_named(power_save_disabled, i2400m_power_save_disabled, int, 0644);
+MODULE_PARM_DESC(power_save_disabled,
+		 "If true, the driver will not tell the device to enter "
+		 "power saving mode when it reports it is ready for it. "
+		 "False by default (so the device is told to do power "
+		 "saving).");
+
 /**
  * i2400m_queue_work - schedule work on a i2400m's queue
  *
@@ -171,7 +180,6 @@ int i2400m_schedule_work(struct i2400m *i2400m,
 	int result;
 	struct i2400m_work *iw;
 
-	BUG_ON(i2400m->work_queue == NULL);
 	result = -ENOMEM;
 	iw = kzalloc(sizeof(*iw), gfp_flags);
 	if (iw == NULL)
@@ -234,9 +242,6 @@ int i2400m_op_msg_from_user(struct wimax_dev *wimax_dev,
 	result = PTR_ERR(ack_skb);
 	if (IS_ERR(ack_skb))
 		goto error_msg_to_dev;
-	if (unlikely(i2400m->trace_msg_from_user))
-		wimax_msg(&i2400m->wimax_dev, "trace",
-			  msg_buf, msg_len, GFP_KERNEL);
 	result = wimax_msg_send(&i2400m->wimax_dev, ack_skb);
 error_msg_to_dev:
 	d_fnend(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p msg_len %zu "
@@ -379,6 +384,11 @@ error:
  * Uploads firmware and brings up all the resources needed to be able
  * to communicate with the device.
  *
+ * The workqueue has to be setup early, at least before RX handling
+ * (it's only real user for now) so it can process reports as they
+ * arrive. We also want to destroy it if we retry, to make sure it is
+ * flushed...easier like this.
+ *
  * TX needs to be setup before the bus-specific code (otherwise on
  * shutdown, the bus-tx code could try to access it).
  */
@@ -389,7 +399,7 @@ int __i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri flags)
 	struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
 	struct net_device *net_dev = wimax_dev->net_dev;
 	struct device *dev = i2400m_dev(i2400m);
-	int times = 3;
+	int times = i2400m->bus_bm_retries;
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 retry:
@@ -404,15 +414,15 @@ retry:
 	result = i2400m_rx_setup(i2400m);
 	if (result < 0)
 		goto error_rx_setup;
-	result = i2400m->bus_dev_start(i2400m);
-	if (result < 0)
-		goto error_bus_dev_start;
 	i2400m->work_queue = create_singlethread_workqueue(wimax_dev->name);
 	if (i2400m->work_queue == NULL) {
 		result = -ENOMEM;
 		dev_err(dev, "cannot create workqueue\n");
 		goto error_create_workqueue;
 	}
+	result = i2400m->bus_dev_start(i2400m);
+	if (result < 0)
+		goto error_bus_dev_start;
 	result = i2400m_firmware_check(i2400m);	/* fw versions ok? */
 	if (result < 0)
 		goto error_fw_check;
@@ -434,17 +444,17 @@ retry:
 error_dev_initialize:
 error_check_mac_addr:
 error_fw_check:
-	destroy_workqueue(i2400m->work_queue);
-error_create_workqueue:
 	i2400m->bus_dev_stop(i2400m);
 error_bus_dev_start:
+	destroy_workqueue(i2400m->work_queue);
+error_create_workqueue:
 	i2400m_rx_release(i2400m);
 error_rx_setup:
 	i2400m_tx_release(i2400m);
 error_tx_setup:
 error_bootstrap:
-	if (result == -ERESTARTSYS && times-- > 0) {
-		flags = I2400M_BRI_SOFT;
+	if (result == -EL3RST && times-- > 0) {
+		flags = I2400M_BRI_SOFT|I2400M_BRI_MAC_REINIT;
 		goto retry;
 	}
 	d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n",
@@ -473,7 +483,9 @@ int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags)
  *
  * Returns: 0 if ok, < 0 errno code on error.
  *
- * Releases all the resources allocated to communicate with the device.
+ * Releases all the resources allocated to communicate with the
+ * device. Note we cannot destroy the workqueue earlier as until RX is
+ * fully destroyed, it could still try to schedule jobs.
  */
 static
 void __i2400m_dev_stop(struct i2400m *i2400m)
@@ -485,8 +497,8 @@ void __i2400m_dev_stop(struct i2400m *i2400m)
 	wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING);
 	i2400m_dev_shutdown(i2400m);
 	i2400m->ready = 0;
-	destroy_workqueue(i2400m->work_queue);
 	i2400m->bus_dev_stop(i2400m);
+	destroy_workqueue(i2400m->work_queue);
 	i2400m_rx_release(i2400m);
 	i2400m_tx_release(i2400m);
 	wimax_state_change(wimax_dev, WIMAX_ST_DOWN);
@@ -548,7 +560,7 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
 		 * i2400m_dev_stop() [we are shutting down anyway, so
 		 * ignore it] or we are resetting somewhere else. */
 		dev_err(dev, "device rebooted\n");
-		i2400m_msg_to_dev_cancel_wait(i2400m, -ERESTARTSYS);
+		i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST);
 		complete(&i2400m->msg_completion);
 		goto out;
 	}
@@ -598,6 +610,8 @@ out:
  */
 int i2400m_dev_reset_handle(struct i2400m *i2400m)
 {
+	i2400m->boot_mode = 1;
+	wmb();		/* Make sure i2400m_msg_to_dev() sees boot_mode */
 	return i2400m_schedule_work(i2400m, __i2400m_dev_reset_handle,
 				    GFP_ATOMIC);
 }
@@ -650,6 +664,7 @@ int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags)
 	result = i2400m_read_mac_addr(i2400m);
 	if (result < 0)
 		goto error_read_mac_addr;
+	random_ether_addr(i2400m->src_mac_addr);
 
 	result = register_netdev(net_dev);	/* Okey dokey, bring it up */
 	if (result < 0) {
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 675c6ce810c..e81750e5445 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -397,7 +397,7 @@ static int i2400m_download_chunk(struct i2400m *i2400m, const void *chunk,
 				 unsigned int direct, unsigned int do_csum)
 {
 	int ret;
-	size_t chunk_len = ALIGN(__chunk_len, I2400M_PL_PAD);
+	size_t chunk_len = ALIGN(__chunk_len, I2400M_PL_ALIGN);
 	struct device *dev = i2400m_dev(i2400m);
 	struct {
 		struct i2400m_bootrom_header cmd;
@@ -532,14 +532,14 @@ int i2400m_dnload_finalize(struct i2400m *i2400m,
 	cmd = (void *) bcf + offset;
 	if (i2400m->sboot == 0) {
 		struct i2400m_bootrom_header jump_ack;
-		d_printf(3, dev, "unsecure boot, jumping to 0x%08x\n",
+		d_printf(1, dev, "unsecure boot, jumping to 0x%08x\n",
 			le32_to_cpu(cmd->target_addr));
 		i2400m_brh_set_opcode(cmd, I2400M_BRH_JUMP);
 		cmd->data_size = 0;
 		ret = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd),
 				    &jump_ack, sizeof(jump_ack), 0);
 	} else {
-		d_printf(3, dev, "secure boot, jumping to 0x%08x\n",
+		d_printf(1, dev, "secure boot, jumping to 0x%08x\n",
 			 le32_to_cpu(cmd->target_addr));
 		cmd_buf = i2400m->bm_cmd_buf;
 		memcpy(&cmd_buf->cmd, cmd, sizeof(*cmd));
@@ -696,8 +696,7 @@ error_dev_gone:
 	return result;
 
 error_timeout:
-	dev_err(dev, "Timed out waiting for reboot ack, resetting\n");
-	i2400m->bus_reset(i2400m, I2400M_RT_BUS);
+	dev_err(dev, "Timed out waiting for reboot ack\n");
 	result = -ETIMEDOUT;
 	goto exit_timeout;
 }
@@ -770,40 +769,21 @@ error_read_mac:
 static
 int i2400m_dnload_init_nonsigned(struct i2400m *i2400m)
 {
-#define POKE(a, d) {					\
-	.address = cpu_to_le32(a),		\
-	.data = cpu_to_le32(d)		\
-}
-	static const struct {
-		__le32 address;
-		__le32 data;
-	} i2400m_pokes[] = {
-		POKE(0x081A58, 0xA7810230),
-		POKE(0x080040, 0x00000000),
-		POKE(0x080048, 0x00000082),
-		POKE(0x08004C, 0x0000081F),
-		POKE(0x080054, 0x00000085),
-		POKE(0x080058, 0x00000180),
-		POKE(0x08005C, 0x00000018),
-		POKE(0x080060, 0x00000010),
-		POKE(0x080574, 0x00000001),
-		POKE(0x080550, 0x00000005),
-		POKE(0xAE0000, 0x00000000),
-	};
-#undef POKE
-	unsigned i;
-	int ret;
+	unsigned i = 0;
+	int ret = 0;
 	struct device *dev = i2400m_dev(i2400m);
-
-	dev_warn(dev, "WARNING!!! non-signed boot UNTESTED PATH!\n");
-
 	d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
-	for (i = 0; i < ARRAY_SIZE(i2400m_pokes); i++) {
-		ret = i2400m_download_chunk(i2400m, &i2400m_pokes[i].data,
-					    sizeof(i2400m_pokes[i].data),
-					    i2400m_pokes[i].address, 1, 1);
-		if (ret < 0)
-			break;
+	if (i2400m->bus_bm_pokes_table) {
+		while (i2400m->bus_bm_pokes_table[i].address) {
+			ret = i2400m_download_chunk(
+				i2400m,
+				&i2400m->bus_bm_pokes_table[i].data,
+				sizeof(i2400m->bus_bm_pokes_table[i].data),
+				i2400m->bus_bm_pokes_table[i].address, 1, 1);
+			if (ret < 0)
+				break;
+			i++;
+		}
 	}
 	d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret);
 	return ret;
@@ -980,11 +960,12 @@ int i2400m_fw_dnload(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf,
 {
 	int ret = 0;
 	struct device *dev = i2400m_dev(i2400m);
-	int count = I2400M_BOOT_RETRIES;
+	int count = i2400m->bus_bm_retries;
 
 	d_fnstart(5, dev, "(i2400m %p bcf %p size %zu)\n",
 		  i2400m, bcf, bcf_size);
 	i2400m->boot_mode = 1;
+	wmb();		/* Make sure other readers see it */
 hw_reboot:
 	if (count-- == 0) {
 		ret = -ERESTARTSYS;
@@ -1033,6 +1014,7 @@ hw_reboot:
 	d_printf(2, dev, "fw %s successfully uploaded\n",
 		 i2400m->fw_name);
 	i2400m->boot_mode = 0;
+	wmb();		/* Make sure i2400m_msg_to_dev() sees boot_mode */
 error_dnload_finalize:
 error_dnload_bcf:
 error_dnload_init:
diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h
index 08c2fb73923..9c4e3189f7b 100644
--- a/drivers/net/wimax/i2400m/i2400m-sdio.h
+++ b/drivers/net/wimax/i2400m/i2400m-sdio.h
@@ -78,6 +78,8 @@ enum {
 	/* The number of ticks to wait for the device to signal that
 	 * it is ready */
 	I2400MS_INIT_SLEEP_INTERVAL = 10,
+	/* How long to wait for the device to settle after reset */
+	I2400MS_SETTLE_TIME = 40,
 };
 
 
@@ -105,6 +107,10 @@ struct i2400ms {
 	char tx_wq_name[32];
 
 	struct dentry *debugfs_dentry;
+
+	wait_queue_head_t bm_wfa_wq;
+	int bm_wait_result;
+	size_t bm_ack_size;
 };
 
 
@@ -129,4 +135,7 @@ extern ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *,
 extern ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *,
 					   struct i2400m_bootrom_header *,
 					   size_t);
+extern void i2400ms_bus_bm_release(struct i2400m *);
+extern int i2400ms_bus_bm_setup(struct i2400m *);
+
 #endif /* #ifndef __I2400M_SDIO_H__ */
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 3ae2df38b59..1fe5da4cf0a 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -150,11 +150,33 @@
 enum {
 	/* Firmware uploading */
 	I2400M_BOOT_RETRIES = 3,
+	I3200_BOOT_RETRIES = 3,
 	/* Size of the Boot Mode Command buffer */
 	I2400M_BM_CMD_BUF_SIZE = 16 * 1024,
 	I2400M_BM_ACK_BUF_SIZE = 256,
 };
 
+/**
+ * struct i2400m_poke_table - Hardware poke table for the Intel 2400m
+ *
+ * This structure will be used to create a device specific poke table
+ * to put the device in a consistant state at boot time.
+ *
+ * @address: The device address to poke
+ *
+ * @data: The data value to poke to the device address
+ *
+ */
+struct i2400m_poke_table{
+	__le32 address;
+	__le32 data;
+};
+
+#define I2400M_FW_POKE(a, d) {		\
+	.address = cpu_to_le32(a),	\
+	.data = cpu_to_le32(d)		\
+}
+
 
 /**
  * i2400m_reset_type - methods to reset a device
@@ -224,6 +246,17 @@ struct i2400m_roq;
  *     process, so it cannot rely on common infrastructure being laid
  *     out.
  *
+ * @bus_bm_retries: [fill] How many times shall a firmware upload /
+ *     device initialization be retried? Different models of the same
+ *     device might need different values, hence it is set by the
+ *     bus-specific driver. Note this value is used in two places,
+ *     i2400m_fw_dnload() and __i2400m_dev_start(); they won't become
+ *     multiplicative (__i2400m_dev_start() calling N times
+ *     i2400m_fw_dnload() and this trying N times to download the
+ *     firmware), as if __i2400m_dev_start() only retries if the
+ *     firmware crashed while initializing the device (not in a
+ *     general case).
+ *
  * @bus_bm_cmd_send: [fill] Function called to send a boot-mode
  *     command. Flags are defined in 'enum i2400m_bm_cmd_flags'. This
  *     is synchronous and has to return 0 if ok or < 0 errno code in
@@ -252,6 +285,12 @@ struct i2400m_roq;
  *     address provided in boot mode is kind of broken and needs to
  *     be re-read later on.
  *
+ * @bus_bm_pokes_table: [fill/optional] A table of device addresses
+ *     and values that will be poked at device init time to move the
+ *     device to the correct state for the type of boot/firmware being
+ *     used.  This table MUST be terminated with (0x000000,
+ *     0x00000000) or bad things will happen.
+ *
  *
  * @wimax_dev: WiMAX generic device for linkage into the kernel WiMAX
  *     stack. Due to the way a net_device is allocated, we need to
@@ -323,6 +362,10 @@ struct i2400m_roq;
  *     delivered. Then the driver can release them to the host. See
  *     drivers/net/i2400m/rx.c for details.
  *
+ * @src_mac_addr: MAC address used to make ethernet packets be coming
+ *     from. This is generated at i2400m_setup() time and used during
+ *     the life cycle of the instance. See i2400m_fake_eth_header().
+ *
  * @init_mutex: Mutex used for serializing the device bringup
  *     sequence; this way if the device reboots in the middle, we
  *     don't try to do a bringup again while we are tearing down the
@@ -395,6 +438,8 @@ struct i2400m {
 
 	size_t bus_tx_block_size;
 	size_t bus_pl_size_max;
+	unsigned bus_bm_retries;
+
 	int (*bus_dev_start)(struct i2400m *);
 	void (*bus_dev_stop)(struct i2400m *);
 	void (*bus_tx_kick)(struct i2400m *);
@@ -406,6 +451,7 @@ struct i2400m {
 				       struct i2400m_bootrom_header *, size_t);
 	const char **bus_fw_names;
 	unsigned bus_bm_mac_addr_impaired:1;
+	const struct i2400m_poke_table *bus_bm_pokes_table;
 
 	spinlock_t tx_lock;		/* protect TX state */
 	void *tx_buf;
@@ -421,6 +467,7 @@ struct i2400m {
 	unsigned rx_pl_num, rx_pl_max, rx_pl_min,
 		rx_num, rx_size_acc, rx_size_min, rx_size_max;
 	struct i2400m_roq *rx_roq;	/* not under rx_lock! */
+	u8 src_mac_addr[ETH_HLEN];
 
 	struct mutex msg_mutex;		/* serialize command execution */
 	struct completion msg_completion;
@@ -704,6 +751,7 @@ static const __le32 i2400m_SBOOT_BARKER[4] = {
 	cpu_to_le32(I2400M_SBOOT_BARKER)
 };
 
+extern int i2400m_power_save_disabled;
 
 /*
  * Utility functions
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 6b1fe7a81f2..9653f478b38 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -404,10 +404,12 @@ static
 void i2400m_rx_fake_eth_header(struct net_device *net_dev,
 			       void *_eth_hdr, __be16 protocol)
 {
+	struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
 	struct ethhdr *eth_hdr = _eth_hdr;
 
 	memcpy(eth_hdr->h_dest, net_dev->dev_addr, sizeof(eth_hdr->h_dest));
-	memset(eth_hdr->h_source, 0, sizeof(eth_hdr->h_dest));
+	memcpy(eth_hdr->h_source, i2400m->src_mac_addr,
+	       sizeof(eth_hdr->h_source));
 	eth_hdr->h_proto = protocol;
 }
 
diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index 487ec58cea4..43927b5d7ad 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -54,8 +54,10 @@ int i2400m_radio_is(struct i2400m *i2400m, enum wimax_rf_state state)
 		/* state == WIMAX_RF_ON */
 		return i2400m->state != I2400M_SS_RF_OFF
 			&& i2400m->state != I2400M_SS_RF_SHUTDOWN;
-	else
+	else {
 		BUG();
+		return -EINVAL;	/* shut gcc warnings on certain arches */
+	}
 }
 
 
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index f9fc3890232..07c32e68909 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -177,7 +177,8 @@ void i2400m_report_hook_work(struct work_struct *ws)
 	struct i2400m_work *iw =
 		container_of(ws, struct i2400m_work, ws);
 	struct i2400m_report_hook_args *args = (void *) iw->pl;
-	i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
+	if (iw->i2400m->ready)
+		i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
 	kfree_skb(args->skb_rx);
 	i2400m_put(iw->i2400m);
 	kfree(iw);
@@ -309,6 +310,9 @@ void i2400m_rx_ctl(struct i2400m *i2400m, struct sk_buff *skb_rx,
 		skb_get(skb_rx);
 		i2400m_queue_work(i2400m, i2400m_report_hook_work,
 				  GFP_KERNEL, &args, sizeof(args));
+		if (unlikely(i2400m->trace_msg_from_user))
+			wimax_msg(&i2400m->wimax_dev, "echo",
+				  l3l4_hdr, size, GFP_KERNEL);
 		result = wimax_msg(&i2400m->wimax_dev, NULL, l3l4_hdr, size,
 				   GFP_KERNEL);
 		if (result < 0)
@@ -1144,7 +1148,7 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 	num_pls = le16_to_cpu(msg_hdr->num_pls);
 	pl_itr = sizeof(*msg_hdr) +	/* Check payload descriptor(s) */
 		num_pls * sizeof(msg_hdr->pld[0]);
-	pl_itr = ALIGN(pl_itr, I2400M_PL_PAD);
+	pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN);
 	if (pl_itr > skb->len) {	/* got all the payload descriptors? */
 		dev_err(dev, "RX: HW BUG? message too short (%u bytes) for "
 			"%u payload descriptors (%zu each, total %zu)\n",
@@ -1162,7 +1166,7 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 		single_last = num_pls == 1 || i == num_pls - 1;
 		i2400m_rx_payload(i2400m, skb, single_last, &msg_hdr->pld[i],
 				  skb->data + pl_itr);
-		pl_itr += ALIGN(pl_size, I2400M_PL_PAD);
+		pl_itr += ALIGN(pl_size, I2400M_PL_ALIGN);
 		cond_resched();		/* Don't monopolize */
 	}
 	kfree_skb(skb);
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
index 3487205d8f5..7d6ec0f475f 100644
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ b/drivers/net/wimax/i2400m/sdio-fw.c
@@ -46,17 +46,24 @@
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *  - SDIO rehash for changes in the bus-driver model
  *
+ * Dirk Brandewie <dirk.j.brandewie@intel.com>
+ *  - Make it IRQ based, not polling
+ *
  * THE PROCEDURE
  *
  * See fw.c for the generic description of this procedure.
  *
  * This file implements only the SDIO specifics. It boils down to how
  * to send a command and waiting for an acknowledgement from the
- * device. We do polled reads.
+ * device.
+ *
+ * All this code is sequential -- all i2400ms_bus_bm_*() functions are
+ * executed in the same thread, except i2400ms_bm_irq() [on its own by
+ * the SDIO driver]. This makes it possible to avoid locking.
  *
  * COMMAND EXECUTION
  *
- * THe generic firmware upload code will call i2400m_bus_bm_cmd_send()
+ * The generic firmware upload code will call i2400m_bus_bm_cmd_send()
  * to send commands.
  *
  * The SDIO devices expects things in 256 byte blocks, so it will pad
@@ -64,12 +71,15 @@
  *
  * ACK RECEPTION
  *
- * This works in polling mode -- the fw loader says when to wait for
- * data and for that it calls i2400ms_bus_bm_wait_for_ack().
+ * This works in IRQ mode -- the fw loader says when to wait for data
+ * and for that it calls i2400ms_bus_bm_wait_for_ack().
  *
- * This will poll the device for data until it is received. We need to
- * receive at least as much bytes as where asked for (although it'll
- * always be a multiple of 256 bytes).
+ * This checks if there is any data available (RX size > 0); if not,
+ * waits for the IRQ handler to notify about it. Once there is data,
+ * it is read and passed to the caller. Doing it this way we don't
+ * need much coordination/locking, and it makes it much more difficult
+ * for an interrupt to be lost and the wait_for_ack() function getting
+ * stuck even when data is pending.
  */
 #include <linux/mmc/sdio_func.h>
 #include "i2400m-sdio.h"
@@ -78,6 +88,7 @@
 #define D_SUBMODULE fw
 #include "sdio-debug-levels.h"
 
+
 /*
  * Send a boot-mode command to the SDIO function
  *
@@ -139,7 +150,7 @@ error_too_big:
 
 
 /*
- * Read an ack from the device's boot-mode (polling)
+ * Read an ack from the device's boot-mode
  *
  * @i2400m:
  * @_ack: pointer to where to store the read data
@@ -150,75 +161,49 @@ error_too_big:
  * The ACK for a BM command is always at least sizeof(*ack) bytes, so
  * check for that. We don't need to check for device reboots
  *
- * NOTE: We do an artificial timeout of 1 sec over the SDIO timeout;
- *     this way we have control over it...there is no way that I know
- *     of setting an SDIO transaction timeout.
  */
 ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
 				    struct i2400m_bootrom_header *ack,
 				    size_t ack_size)
 {
-	int result;
-	ssize_t rx_size;
-	u64 timeout;
+	ssize_t result;
 	struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	int size;
 
 	BUG_ON(sizeof(*ack) > ack_size);
 
 	d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
 		  i2400m, ack, ack_size);
 
-	timeout = get_jiffies_64() + 2 * HZ;
-	sdio_claim_host(func);
-	while (1) {
-		if (time_after64(get_jiffies_64(), timeout)) {
-			rx_size = -ETIMEDOUT;
-			dev_err(dev, "timeout waiting for ack data\n");
-			goto error_timedout;
-		}
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_ack_size = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
 
-		/* Find the RX size, check if it fits or not -- it if
-		 * doesn't fit, fail, as we have no way to dispose of
-		 * the extra data. */
-		rx_size = __i2400ms_rx_get_size(i2400ms);
-		if (rx_size < 0)
-			goto error_rx_get_size;
-		result = -ENOSPC;		/* Check it fits */
-		if (rx_size < sizeof(*ack)) {
-			rx_size = -EIO;
-			dev_err(dev, "HW BUG? received is too small (%zu vs "
-				"%zu needed)\n", sizeof(*ack), rx_size);
-			goto error_too_small;
-		}
-		if (rx_size > I2400M_BM_ACK_BUF_SIZE) {
-			dev_err(dev, "SW BUG? BM_ACK_BUF is too small (%u vs "
-				"%zu needed)\n", I2400M_BM_ACK_BUF_SIZE,
-				rx_size);
-			goto error_too_small;
-		}
+	result = wait_event_timeout(i2400ms->bm_wfa_wq,
+				    i2400ms->bm_ack_size != -EINPROGRESS,
+				    2 * HZ);
+	if (result == 0) {
+		result = -ETIMEDOUT;
+		dev_err(dev, "BM: error waiting for an ack\n");
+		goto error_timeout;
+	}
 
-		/* Read it */
-		result = sdio_memcpy_fromio(func, i2400m->bm_ack_buf,
-					    I2400MS_DATA_ADDR, rx_size);
-		if (result == -ETIMEDOUT || result == -ETIME)
-			continue;
-		if (result < 0) {
-			dev_err(dev, "BM SDIO receive (%zu B) failed: %d\n",
-				rx_size, result);
-			goto error_read;
-		} else
-			break;
+	spin_lock(&i2400m->rx_lock);
+	result = i2400ms->bm_ack_size;
+	BUG_ON(result == -EINPROGRESS);
+	if (result < 0)        /* so we exit when rx_release() is called */
+		dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
+	else {
+		size = min(ack_size, i2400ms->bm_ack_size);
+		memcpy(ack, i2400m->bm_ack_buf, size);
 	}
-	rx_size = min((ssize_t)ack_size, rx_size);
-	memcpy(ack, i2400m->bm_ack_buf, rx_size);
-error_read:
-error_too_small:
-error_rx_get_size:
-error_timedout:
-	sdio_release_host(func);
-	d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %ld\n",
-		i2400m, ack, ack_size, (long) rx_size);
-	return rx_size;
+	i2400ms->bm_ack_size = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
+
+error_timeout:
+	d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
+		i2400m, ack, ack_size, result);
+	return result;
 }
diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
index a3008b904f7..321beadf6e4 100644
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ b/drivers/net/wimax/i2400m/sdio-rx.c
@@ -69,6 +69,13 @@
 #define D_SUBMODULE rx
 #include "sdio-debug-levels.h"
 
+static const __le32 i2400m_ACK_BARKER[4] = {
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER)
+};
+
 
 /*
  * Read and return the amount of bytes available for RX
@@ -131,25 +138,35 @@ void i2400ms_rx(struct i2400ms *i2400ms)
 		ret = rx_size;
 		goto error_get_size;
 	}
+
 	ret = -ENOMEM;
 	skb = alloc_skb(rx_size, GFP_ATOMIC);
 	if (NULL == skb) {
 		dev_err(dev, "RX: unable to alloc skb\n");
 		goto error_alloc_skb;
 	}
-
 	ret = sdio_memcpy_fromio(func, skb->data,
 				 I2400MS_DATA_ADDR, rx_size);
 	if (ret < 0) {
 		dev_err(dev, "RX: SDIO data read failed: %d\n", ret);
 		goto error_memcpy_fromio;
 	}
-	/* Check if device has reset */
-	if (!memcmp(skb->data, i2400m_NBOOT_BARKER,
-		    sizeof(i2400m_NBOOT_BARKER))
-	    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
-		       sizeof(i2400m_SBOOT_BARKER))) {
+
+	rmb();	/* make sure we get boot_mode from dev_reset_handle */
+	if (i2400m->boot_mode == 1) {
+		spin_lock(&i2400m->rx_lock);
+		i2400ms->bm_ack_size = rx_size;
+		spin_unlock(&i2400m->rx_lock);
+		memcpy(i2400m->bm_ack_buf, skb->data, rx_size);
+		wake_up(&i2400ms->bm_wfa_wq);
+		dev_err(dev, "RX: SDIO boot mode message\n");
+		kfree_skb(skb);
+	} else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER,
+				    sizeof(i2400m_NBOOT_BARKER))
+			    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
+				       sizeof(i2400m_SBOOT_BARKER)))) {
 		ret = i2400m_dev_reset_handle(i2400m);
+		dev_err(dev, "RX: SDIO reboot barker\n");
 		kfree_skb(skb);
 	} else {
 		skb_put(skb, rx_size);
@@ -179,7 +196,6 @@ void i2400ms_irq(struct sdio_func *func)
 {
 	int ret;
 	struct i2400ms *i2400ms = sdio_get_drvdata(func);
-	struct i2400m *i2400m = &i2400ms->i2400m;
 	struct device *dev = &func->dev;
 	int val;
 
@@ -194,10 +210,7 @@ void i2400ms_irq(struct sdio_func *func)
 		goto error_no_irq;
 	}
 	sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
-	if (WARN_ON(i2400m->boot_mode != 0))
-		dev_err(dev, "RX: SW BUG? boot mode and IRQ is up?\n");
-	else
-		i2400ms_rx(i2400ms);
+	i2400ms_rx(i2400ms);
 error_no_irq:
 	d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
 	return;
@@ -214,8 +227,15 @@ int i2400ms_rx_setup(struct i2400ms *i2400ms)
 	int result;
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	struct i2400m *i2400m = &i2400ms->i2400m;
 
 	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+
+	init_waitqueue_head(&i2400ms->bm_wfa_wq);
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_wait_result = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
+
 	sdio_claim_host(func);
 	result = sdio_claim_irq(func, i2400ms_irq);
 	if (result < 0) {
@@ -245,8 +265,13 @@ void i2400ms_rx_release(struct i2400ms *i2400ms)
 	int result;
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	struct i2400m *i2400m = &i2400ms->i2400m;
 
 	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_ack_size = -EINTR;
+	spin_unlock(&i2400m->rx_lock);
+	wake_up_all(&i2400ms->bm_wfa_wq);
 	sdio_claim_host(func);
 	sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result);
 	sdio_release_irq(func);
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 5ac5e76701c..2538825d1c6 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -78,6 +78,14 @@ static const char *i2400ms_bus_fw_names[] = {
 };
 
 
+static const struct i2400m_poke_table i2400ms_pokes[] = {
+	I2400M_FW_POKE(0x6BE260, 0x00000088),
+	I2400M_FW_POKE(0x080550, 0x00000005),
+	I2400M_FW_POKE(0xAE0000, 0x00000000),
+	I2400M_FW_POKE(0x000000, 0x00000000), /* MUST be 0 terminated or bad
+					       * things will happen */
+};
+
 /*
  * Enable the SDIO function
  *
@@ -148,19 +156,14 @@ int i2400ms_bus_dev_start(struct i2400m *i2400m)
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 	msleep(200);
-	result = i2400ms_rx_setup(i2400ms);
-	if (result < 0)
-		goto error_rx_setup;
 	result = i2400ms_tx_setup(i2400ms);
 	if (result < 0)
 		goto error_tx_setup;
 	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
 	return result;
 
-	i2400ms_tx_release(i2400ms);
 error_tx_setup:
-	i2400ms_rx_release(i2400ms);
-error_rx_setup:
+	i2400ms_tx_release(i2400ms);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 	return result;
 }
@@ -174,7 +177,6 @@ void i2400ms_bus_dev_stop(struct i2400m *i2400m)
 	struct device *dev = &func->dev;
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
-	i2400ms_rx_release(i2400ms);
 	i2400ms_tx_release(i2400ms);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 }
@@ -255,7 +257,7 @@ error_kzalloc:
 static
 int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
 {
-	int result;
+	int result = 0;
 	struct i2400ms *i2400ms =
 		container_of(i2400m, struct i2400ms, i2400m);
 	struct device *dev = i2400m_dev(i2400m);
@@ -280,8 +282,25 @@ int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
 					       sizeof(i2400m_COLD_BOOT_BARKER));
 	else if (rt == I2400M_RT_BUS) {
 do_bus_reset:
-		dev_err(dev, "FIXME: SDIO bus reset not implemented\n");
-		result = rt == I2400M_RT_WARM ? -ENODEV : -ENOSYS;
+		/* call netif_tx_disable() before sending IOE disable,
+		 * so that all the tx from network layer are stopped
+		 * while IOE is being reset. Make sure it is called
+		 * only after register_netdev() was issued.
+		 */
+		if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
+			netif_tx_disable(i2400m->wimax_dev.net_dev);
+
+		i2400ms_rx_release(i2400ms);
+		sdio_claim_host(i2400ms->func);
+		sdio_disable_func(i2400ms->func);
+		sdio_release_host(i2400ms->func);
+
+		/* Wait for the device to settle */
+		msleep(40);
+
+		result = i2400ms_enable_function(i2400ms->func);
+		if (result >= 0)
+			i2400ms_rx_setup(i2400ms);
 	} else
 		BUG();
 	if (result < 0 && rt != I2400M_RT_BUS) {
@@ -404,24 +423,32 @@ int i2400ms_probe(struct sdio_func *func,
 	i2400m->bus_dev_stop = i2400ms_bus_dev_stop;
 	i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
 	i2400m->bus_reset = i2400ms_bus_reset;
+	/* The iwmc3200-wimax sometimes requires the driver to try
+	 * hard when we paint it into a corner. */
+	i2400m->bus_bm_retries = I3200_BOOT_RETRIES;
 	i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
 	i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
 	i2400m->bus_fw_names = i2400ms_bus_fw_names;
 	i2400m->bus_bm_mac_addr_impaired = 1;
-
-	result = i2400ms_enable_function(i2400ms->func);
-	if (result < 0) {
-		dev_err(dev, "Cannot enable SDIO function: %d\n", result);
-		goto error_func_enable;
-	}
+	i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
 
 	sdio_claim_host(func);
 	result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
+	sdio_release_host(func);
 	if (result < 0) {
 		dev_err(dev, "Failed to set block size: %d\n", result);
 		goto error_set_blk_size;
 	}
-	sdio_release_host(func);
+
+	result = i2400ms_enable_function(i2400ms->func);
+	if (result < 0) {
+		dev_err(dev, "Cannot enable SDIO function: %d\n", result);
+		goto error_func_enable;
+	}
+
+	result = i2400ms_rx_setup(i2400ms);
+	if (result < 0)
+		goto error_rx_setup;
 
 	result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
 	if (result < 0) {
@@ -440,12 +467,14 @@ int i2400ms_probe(struct sdio_func *func,
 error_debugfs_add:
 	i2400m_release(i2400m);
 error_setup:
-	sdio_set_drvdata(func, NULL);
+	i2400ms_rx_release(i2400ms);
+error_rx_setup:
 	sdio_claim_host(func);
-error_set_blk_size:
 	sdio_disable_func(func);
 	sdio_release_host(func);
 error_func_enable:
+error_set_blk_size:
+	sdio_set_drvdata(func, NULL);
 	free_netdev(net_dev);
 error_alloc_netdev:
 	return result;
@@ -462,6 +491,7 @@ void i2400ms_remove(struct sdio_func *func)
 
 	d_fnstart(3, dev, "SDIO func %p\n", func);
 	debugfs_remove_recursive(i2400ms->debugfs_dentry);
+	i2400ms_rx_release(i2400ms);
 	i2400m_release(i2400m);
 	sdio_set_drvdata(func, NULL);
 	sdio_claim_host(func);
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index 613a88ffd65..fa16ccf8e26 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -278,6 +278,48 @@ enum {
 #define TAIL_FULL ((void *)~(unsigned long)NULL)
 
 /*
+ * Calculate how much tail room is available
+ *
+ * Note the trick here. This path is ONLY caleed for Case A (see
+ * i2400m_tx_fifo_push() below), where we have:
+ *
+ *       Case A
+ * N  ___________
+ *   | tail room |
+ *   |           |
+ *   |<-  IN   ->|
+ *   |           |
+ *   |   data    |
+ *   |           |
+ *   |<-  OUT  ->|
+ *   |           |
+ *   | head room |
+ * 0  -----------
+ *
+ * When calculating the tail_room, tx_in might get to be zero if
+ * i2400m->tx_in is right at the end of the buffer (really full
+ * buffer) if there is no head room. In this case, tail_room would be
+ * I2400M_TX_BUF_SIZE, although it is actually zero. Hence the final
+ * mod (%) operation. However, when doing this kind of optimization,
+ * i2400m->tx_in being zero would fail, so we treat is an a special
+ * case.
+ */
+static inline
+size_t __i2400m_tx_tail_room(struct i2400m *i2400m)
+{
+	size_t tail_room;
+	size_t tx_in;
+
+	if (unlikely(i2400m->tx_in) == 0)
+		return I2400M_TX_BUF_SIZE;
+	tx_in = i2400m->tx_in % I2400M_TX_BUF_SIZE;
+	tail_room = I2400M_TX_BUF_SIZE - tx_in;
+	tail_room %= I2400M_TX_BUF_SIZE;
+	return tail_room;
+}
+
+
+/*
  * Allocate @size bytes in the TX fifo, return a pointer to it
  *
  * @i2400m: device descriptor
@@ -338,7 +380,7 @@ void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, size_t padding)
 		return NULL;
 	}
 	/* Is there space at the tail? */
-	tail_room = I2400M_TX_BUF_SIZE - i2400m->tx_in % I2400M_TX_BUF_SIZE;
+	tail_room = __i2400m_tx_tail_room(i2400m);
 	if (tail_room < needed_size) {
 		if (i2400m->tx_out % I2400M_TX_BUF_SIZE
 		    < i2400m->tx_in % I2400M_TX_BUF_SIZE) {
@@ -367,17 +409,29 @@ void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, size_t padding)
  * (I2400M_PL_PAD for the payloads, I2400M_TX_PLD_SIZE for the
  * header).
  *
+ * Tail room can get to be zero if a message was opened when there was
+ * space only for a header. _tx_close() will mark it as to-skip (as it
+ * will have no payloads) and there will be no more space to flush, so
+ * nothing has to be done here. This is probably cheaper than ensuring
+ * in _tx_new() that there is some space for payloads...as we could
+ * always possibly hit the same problem if the payload wouldn't fit.
+ *
  * Note:
  *
  *     Assumes i2400m->tx_lock is taken, and we use that as a barrier
+ *
+ *     This path is only taken for Case A FIFO situations [see
+ *     i2400m_tx_fifo_push()]
  */
 static
 void i2400m_tx_skip_tail(struct i2400m *i2400m)
 {
 	struct device *dev = i2400m_dev(i2400m);
 	size_t tx_in = i2400m->tx_in % I2400M_TX_BUF_SIZE;
-	size_t tail_room = I2400M_TX_BUF_SIZE - tx_in;
+	size_t tail_room = __i2400m_tx_tail_room(i2400m);
 	struct i2400m_msg_hdr *msg = i2400m->tx_buf + tx_in;
+	if (unlikely(tail_room == 0))
+		return;
 	BUG_ON(tail_room < sizeof(*msg));
 	msg->size = tail_room | I2400M_TX_SKIP;
 	d_printf(2, dev, "skip tail: skipping %zu bytes @%zu\n",
@@ -474,10 +528,18 @@ void i2400m_tx_close(struct i2400m *i2400m)
 	struct i2400m_msg_hdr *tx_msg_moved;
 	size_t aligned_size, padding, hdr_size;
 	void *pad_buf;
+	unsigned num_pls;
 
 	if (tx_msg->size & I2400M_TX_SKIP)	/* a skipper? nothing to do */
 		goto out;
-
+	num_pls = le16_to_cpu(tx_msg->num_pls);
+	/* We can get this situation when a new message was started
+	 * and there was no space to add payloads before hitting the
+	 tail (and taking padding into consideration). */
+	if (num_pls == 0) {
+		tx_msg->size |= I2400M_TX_SKIP;
+		goto out;
+	}
 	/* Relocate the message header
 	 *
 	 * Find the current header size, align it to 16 and if we need
@@ -491,7 +553,7 @@ void i2400m_tx_close(struct i2400m *i2400m)
 	 */
 	hdr_size = sizeof(*tx_msg)
 		+ le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]);
-	hdr_size = ALIGN(hdr_size, I2400M_PL_PAD);
+	hdr_size = ALIGN(hdr_size, I2400M_PL_ALIGN);
 	tx_msg->offset = I2400M_TX_PLD_SIZE - hdr_size;
 	tx_msg_moved = (void *) tx_msg + tx_msg->offset;
 	memmove(tx_msg_moved, tx_msg, hdr_size);
@@ -574,7 +636,7 @@ int i2400m_tx(struct i2400m *i2400m, const void *buf, size_t buf_len,
 
 	d_fnstart(3, dev, "(i2400m %p skb %p [%zu bytes] pt %u)\n",
 		  i2400m, buf, buf_len, pl_type);
-	padded_len = ALIGN(buf_len, I2400M_PL_PAD);
+	padded_len = ALIGN(buf_len, I2400M_PL_ALIGN);
 	d_printf(5, dev, "padded_len %zd buf_len %zd\n", padded_len, buf_len);
 	/* If there is no current TX message, create one; if the
 	 * current one is out of payload slots or we have a singleton,
@@ -591,6 +653,8 @@ try_new:
 		i2400m_tx_close(i2400m);
 		i2400m_tx_new(i2400m);
 	}
+	if (i2400m->tx_msg == NULL)
+		goto error_tx_new;
 	if (i2400m->tx_msg->size + padded_len > I2400M_TX_BUF_SIZE / 2) {
 		d_printf(2, dev, "TX: message too big, going new\n");
 		i2400m_tx_close(i2400m);
@@ -773,7 +837,6 @@ void i2400m_tx_msg_sent(struct i2400m *i2400m)
 	n = i2400m->tx_out / I2400M_TX_BUF_SIZE;
 	i2400m->tx_out %= I2400M_TX_BUF_SIZE;
 	i2400m->tx_in -= n * I2400M_TX_BUF_SIZE;
-	netif_start_queue(i2400m->wimax_dev.net_dev);
 	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 }
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 17851321b7f..cfdaf69da9d 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -254,8 +254,10 @@ do_bus_reset:
 			dev_err(dev, "USB reset failed (%d), giving up!\n",
 				result);
 		}
-	} else
+	} else {
+		result = -EINVAL;	/* shut gcc up in certain arches */
 		BUG();
+	}
 	if (result < 0
 	    && result != -EINVAL	/* device is gone */
 	    && rt != I2400M_RT_BUS) {
@@ -399,6 +401,7 @@ int i2400mu_probe(struct usb_interface *iface,
 	i2400m->bus_dev_stop = i2400mu_bus_dev_stop;
 	i2400m->bus_tx_kick = i2400mu_bus_tx_kick;
 	i2400m->bus_reset = i2400mu_bus_reset;
+	i2400m->bus_bm_retries = I2400M_BOOT_RETRIES;
 	i2400m->bus_bm_cmd_send = i2400mu_bus_bm_cmd_send;
 	i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
 	i2400m->bus_fw_names = i2400mu_bus_fw_names;
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 3d94e7dfea6..5bc00db21b2 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -146,14 +146,14 @@ config LIBERTAS_CS
 	  A driver for Marvell Libertas 8385 CompactFlash devices.
 
 config LIBERTAS_SDIO
-	tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
+	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
 	depends on LIBERTAS && MMC
 	---help---
-	  A driver for Marvell Libertas 8385 and 8686 SDIO devices.
+	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
 
 config LIBERTAS_SPI
 	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
-	depends on LIBERTAS && SPI && GENERIC_GPIO
+	depends on LIBERTAS && SPI
 	---help---
 	  A driver for Marvell Libertas 8686 SPI devices.
 
@@ -310,7 +310,7 @@ config PRISM54
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called prism54.ko.
+	  The module will be called prism54.
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
@@ -333,6 +333,7 @@ config USB_ZD1201
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
 	depends on USB && WLAN_80211 && EXPERIMENTAL
+	depends on CFG80211
 	select USB_USBNET
 	select USB_NET_CDCETHER
 	select USB_NET_RNDIS_HOST
@@ -434,6 +435,13 @@ config RTL8187
 
 	  Thanks to Realtek for their support!
 
+# If possible, automatically enable LEDs for RTL8187.
+
+config RTL8187_LEDS
+	bool
+	depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
+	default y
+
 config ADM8211
 	tristate "ADMtek ADM8211 support"
 	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
@@ -484,9 +492,7 @@ config MWL8K
 	  will be called mwl8k.  If unsure, say N.
 
 source "drivers/net/wireless/p54/Kconfig"
-source "drivers/net/wireless/ath5k/Kconfig"
-source "drivers/net/wireless/ath9k/Kconfig"
-source "drivers/net/wireless/ar9170/Kconfig"
+source "drivers/net/wireless/ath/Kconfig"
 source "drivers/net/wireless/ipw2x00/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
@@ -495,5 +501,7 @@ source "drivers/net/wireless/b43legacy/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
 source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/iwmc3200wifi/Kconfig"
 
 endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 50e7fba7f0e..7a4647e78fd 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -55,8 +55,10 @@ obj-$(CONFIG_RT2X00)	+= rt2x00/
 
 obj-$(CONFIG_P54_COMMON)	+= p54/
 
-obj-$(CONFIG_ATH5K)	+= ath5k/
-obj-$(CONFIG_ATH9K)	+= ath9k/
-obj-$(CONFIG_AR9170_USB)	+= ar9170/
+obj-$(CONFIG_ATH_COMMON)	+= ath/
 
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
+
+obj-$(CONFIG_WL12XX)	+= wl12xx/
+
+obj-$(CONFIG_IWM)	+= iwmc3200wifi/
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index f7182179501..2b9e379994a 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1311,18 +1311,20 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int adm8211_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
+static void adm8211_bss_info_changed(struct ieee80211_hw *dev,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *conf,
+				     u32 changes)
 {
 	struct adm8211_priv *priv = dev->priv;
 
+	if (!(changes & BSS_CHANGED_BSSID))
+		return;
+
 	if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
 		adm8211_set_bssid(dev, conf->bssid);
 		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
 	}
-
-	return 0;
 }
 
 static void adm8211_configure_filter(struct ieee80211_hw *dev,
@@ -1753,7 +1755,7 @@ static const struct ieee80211_ops adm8211_ops = {
 	.add_interface		= adm8211_add_interface,
 	.remove_interface	= adm8211_remove_interface,
 	.config			= adm8211_config,
-	.config_interface	= adm8211_config_interface,
+	.bss_info_changed	= adm8211_bss_info_changed,
 	.configure_filter	= adm8211_configure_filter,
 	.get_stats		= adm8211_get_stats,
 	.get_tx_stats		= adm8211_get_tx_stats,
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 9eabf4d1f2e..c70604f0329 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1935,7 +1935,7 @@ static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) {
 		netif_stop_queue (dev);
 		if (npacks > MAXTXQ) {
 			dev->stats.tx_fifo_errors++;
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 		skb_queue_tail (&ai->txq, skb);
 		return 0;
@@ -2139,7 +2139,7 @@ static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) {
 
 		if (i == MAX_FIDS / 2) {
 			dev->stats.tx_fifo_errors++;
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 	/* check min length*/
@@ -2193,7 +2193,8 @@ static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
 	if (test_bit(FLAG_MPI, &priv->flags)) {
 		/* Not implemented yet for MPI350 */
 		netif_stop_queue(dev);
-		return -ENETDOWN;
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
 	}
 
 	if ( skb == NULL ) {
@@ -2210,7 +2211,7 @@ static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
 
 		if (i == MAX_FIDS) {
 			dev->stats.tx_fifo_errors++;
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 	/* check min length*/
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index a54a67c425c..d84caf198a2 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1199,7 +1199,7 @@ bad_end:
 	arlan_process_interrupt(dev);
 	netif_stop_queue (dev);
 	ARLAN_DEBUG_EXIT("arlan_tx");
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 8d93ca4651b..4efbdbe6d6b 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1965,13 +1965,18 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed)
 	return 0;
 }
 
-static int at76_config_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_vif *vif,
-				 struct ieee80211_if_conf *conf)
+static void at76_bss_info_changed(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_bss_conf *conf,
+				  u32 changed)
 {
 	struct at76_priv *priv = hw->priv;
 
 	at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+	if (!(changed & BSS_CHANGED_BSSID))
+		return;
+
 	at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
 
 	mutex_lock(&priv->mtx);
@@ -1983,8 +1988,6 @@ static int at76_config_interface(struct ieee80211_hw *hw,
 		at76_join(priv);
 
 	mutex_unlock(&priv->mtx);
-
-	return 0;
 }
 
 /* must be atomic */
@@ -2076,7 +2079,7 @@ static const struct ieee80211_ops at76_ops = {
 	.add_interface = at76_add_interface,
 	.remove_interface = at76_remove_interface,
 	.config = at76_config,
-	.config_interface = at76_config_interface,
+	.bss_info_changed = at76_bss_info_changed,
 	.configure_filter = at76_configure_filter,
 	.start = at76_mac80211_start,
 	.stop = at76_mac80211_stop,
@@ -2250,6 +2253,7 @@ static int at76_init_new_device(struct at76_priv *priv,
 
 	/* mac80211 initialisation */
 	priv->hw->wiphy->max_scan_ssids = 1;
+	priv->hw->wiphy->max_scan_ie_len = 0;
 	priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band;
 	priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
@@ -2311,8 +2315,7 @@ static void at76_delete_device(struct at76_priv *priv)
 
 	del_timer_sync(&ledtrig_tx_timer);
 
-	if (priv->rx_skb)
-		kfree_skb(priv->rx_skb);
+	kfree_skb(priv->rx_skb);
 
 	usb_put_dev(priv->udev);
 
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
new file mode 100644
index 00000000000..d26e7b48531
--- /dev/null
+++ b/drivers/net/wireless/ath/Kconfig
@@ -0,0 +1,8 @@
+config ATH_COMMON
+	tristate "Atheros Wireless Cards"
+	depends on ATH5K || ATH9K || AR9170_USB
+
+source "drivers/net/wireless/ath/ath5k/Kconfig"
+source "drivers/net/wireless/ath/ath9k/Kconfig"
+source "drivers/net/wireless/ath/ar9170/Kconfig"
+
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
new file mode 100644
index 00000000000..4bb0132ada3
--- /dev/null
+++ b/drivers/net/wireless/ath/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ATH5K)		+= ath5k/
+obj-$(CONFIG_ATH9K)		+= ath9k/
+obj-$(CONFIG_AR9170_USB)        += ar9170/
+
+obj-$(CONFIG_ATH_COMMON)	+= ath.o
+ath-objs 		:= main.o regd.o
diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig
index de4281fda12..b99e3263ee6 100644
--- a/drivers/net/wireless/ar9170/Kconfig
+++ b/drivers/net/wireless/ath/ar9170/Kconfig
@@ -2,6 +2,7 @@ config AR9170_USB
 	tristate "Atheros AR9170 802.11n USB support"
 	depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL
 	select FW_LOADER
+	select ATH_COMMON
 	help
 	  This is a driver for the Atheros "otus" 802.11n USB devices.
 
diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ath/ar9170/Makefile
index 8d91c7ee321..8d91c7ee321 100644
--- a/drivers/net/wireless/ar9170/Makefile
+++ b/drivers/net/wireless/ath/ar9170/Makefile
diff --git a/drivers/net/wireless/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index f4fb2e94aea..bb97981fb24 100644
--- a/drivers/net/wireless/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -40,7 +40,7 @@
 
 #include <linux/completion.h>
 #include <linux/spinlock.h>
-#include <net/wireless.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #ifdef CONFIG_AR9170_LEDS
 #include <linux/leds.h>
@@ -48,6 +48,8 @@
 #include "eeprom.h"
 #include "hw.h"
 
+#include "../regd.h"
+
 #define PAYLOAD_MAX	(AR9170_MAX_CMD_LEN/4 - 1)
 
 enum ar9170_bw {
@@ -58,6 +60,21 @@ enum ar9170_bw {
 	__AR9170_NUM_BW,
 };
 
+static inline enum ar9170_bw nl80211_to_ar9170(enum nl80211_channel_type type)
+{
+	switch (type) {
+	case NL80211_CHAN_NO_HT:
+	case NL80211_CHAN_HT20:
+		return AR9170_BW_20;
+	case NL80211_CHAN_HT40MINUS:
+		return AR9170_BW_40_BELOW;
+	case NL80211_CHAN_HT40PLUS:
+		return AR9170_BW_40_ABOVE;
+	default:
+		BUG();
+	}
+}
+
 enum ar9170_rf_init_mode {
 	AR9170_RFI_NONE,
 	AR9170_RFI_WARM,
@@ -74,6 +91,7 @@ struct ar9170_led {
 	struct led_classdev l;
 	char name[32];
 	unsigned int toggled;
+	bool last_state;
 	bool registered;
 };
 
@@ -84,20 +102,31 @@ enum ar9170_device_state {
 	AR9170_STOPPED,
 	AR9170_IDLE,
 	AR9170_STARTED,
-	AR9170_ASSOCIATED,
 };
 
+struct ar9170_rxstream_mpdu_merge {
+	struct ar9170_rx_head plcp;
+	bool has_plcp;
+};
+
+#define AR9170_QUEUE_TIMEOUT		64
+#define AR9170_TX_TIMEOUT		8
+#define AR9170_JANITOR_DELAY		128
+#define AR9170_TX_INVALID_RATE		0xffffffff
+
 struct ar9170 {
 	struct ieee80211_hw *hw;
 	struct mutex mutex;
 	enum ar9170_device_state state;
+	unsigned long bad_hw_nagger;
 
 	int (*open)(struct ar9170 *);
 	void (*stop)(struct ar9170 *);
-	int (*tx)(struct ar9170 *, struct sk_buff *, bool, unsigned int);
+	int (*tx)(struct ar9170 *, struct sk_buff *);
 	int (*exec_cmd)(struct ar9170 *, enum ar9170_cmd, u32 ,
 			void *, u32 , void *);
 	void (*callback_cmd)(struct ar9170 *, u32 , void *);
+	int (*flush)(struct ar9170 *);
 
 	/* interface mode settings */
 	struct ieee80211_vif *vif;
@@ -117,7 +146,8 @@ struct ar9170 {
 	struct work_struct filter_config_work;
 	u64 cur_mc_hash, want_mc_hash;
 	u32 cur_filter, want_filter;
-	unsigned int filter_changed;
+	unsigned long filter_changed;
+	unsigned int filter_state;
 	bool sniffer_enabled;
 
 	/* PHY */
@@ -151,21 +181,35 @@ struct ar9170 {
 
 	/* EEPROM */
 	struct ar9170_eeprom eeprom;
+	struct ath_regulatory regulatory;
 
-	/* global tx status for unregistered Stations. */
-	struct sk_buff_head global_tx_status;
-	struct sk_buff_head global_tx_status_waste;
-	struct delayed_work tx_status_janitor;
+	/* tx queues - as seen by hw - */
+	struct sk_buff_head tx_pending[__AR9170_NUM_TXQ];
+	struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
+	struct delayed_work tx_janitor;
+
+	/* rxstream mpdu merge */
+	struct ar9170_rxstream_mpdu_merge rx_mpdu;
+	struct sk_buff *rx_failover;
+	int rx_failover_missing;
 };
 
 struct ar9170_sta_info {
-	struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
 };
 
-#define IS_STARTED(a)		(a->state >= AR9170_STARTED)
-#define IS_ACCEPTING_CMD(a)	(a->state >= AR9170_IDLE)
+#define AR9170_TX_FLAG_WAIT_FOR_ACK	BIT(0)
+#define AR9170_TX_FLAG_NO_ACK		BIT(1)
+#define AR9170_TX_FLAG_BLOCK_ACK	BIT(2)
+
+struct ar9170_tx_info {
+	unsigned long timeout;
+	unsigned int flags;
+};
+
+#define IS_STARTED(a)		(((struct ar9170 *)a)->state >= AR9170_STARTED)
+#define IS_ACCEPTING_CMD(a)	(((struct ar9170 *)a)->state >= AR9170_IDLE)
 
-#define AR9170_FILTER_CHANGED_PROMISC		BIT(0)
+#define AR9170_FILTER_CHANGED_MODE		BIT(0)
 #define AR9170_FILTER_CHANGED_MULTICAST		BIT(1)
 #define AR9170_FILTER_CHANGED_FRAMEFILTER	BIT(2)
 
@@ -174,8 +218,9 @@ void *ar9170_alloc(size_t priv_size);
 int ar9170_register(struct ar9170 *ar, struct device *pdev);
 void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb);
 void ar9170_unregister(struct ar9170 *ar);
-void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
-			     bool update_statistics, u16 tx_status);
+void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb);
+void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len);
+int ar9170_nag_limiter(struct ar9170 *ar);
 
 /* MAC */
 int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -185,6 +230,9 @@ int ar9170_update_multicast(struct ar9170 *ar);
 int ar9170_update_frame_filter(struct ar9170 *ar);
 int ar9170_set_operating_mode(struct ar9170 *ar);
 int ar9170_set_beacon_timers(struct ar9170 *ar);
+int ar9170_set_dyn_sifs_ack(struct ar9170 *ar);
+int ar9170_set_slot_time(struct ar9170 *ar);
+int ar9170_set_basic_rates(struct ar9170 *ar);
 int ar9170_set_hwretry_limit(struct ar9170 *ar, u32 max_retry);
 int ar9170_update_beacon(struct ar9170 *ar);
 void ar9170_new_beacon(struct work_struct *work);
diff --git a/drivers/net/wireless/ar9170/cmd.c b/drivers/net/wireless/ath/ar9170/cmd.c
index f57a6200167..f57a6200167 100644
--- a/drivers/net/wireless/ar9170/cmd.c
+++ b/drivers/net/wireless/ath/ar9170/cmd.c
diff --git a/drivers/net/wireless/ar9170/cmd.h b/drivers/net/wireless/ath/ar9170/cmd.h
index a4f0e50e52b..a4f0e50e52b 100644
--- a/drivers/net/wireless/ar9170/cmd.h
+++ b/drivers/net/wireless/ath/ar9170/cmd.h
diff --git a/drivers/net/wireless/ar9170/eeprom.h b/drivers/net/wireless/ath/ar9170/eeprom.h
index d2c8cc83f1d..d2c8cc83f1d 100644
--- a/drivers/net/wireless/ar9170/eeprom.h
+++ b/drivers/net/wireless/ath/ar9170/eeprom.h
diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 53e250a4278..6cbfb2f8339 100644
--- a/drivers/net/wireless/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -207,6 +207,9 @@ enum ar9170_cmd {
 #define AR9170_MAC_REG_AC1_AC0_TXOP		(AR9170_MAC_REG_BASE + 0xB44)
 #define AR9170_MAC_REG_AC3_AC2_TXOP		(AR9170_MAC_REG_BASE + 0xB48)
 
+#define AR9170_MAC_REG_AMPDU_FACTOR		(AR9170_MAC_REG_BASE + 0xB9C)
+#define AR9170_MAC_REG_AMPDU_DENSITY		(AR9170_MAC_REG_BASE + 0xBA0)
+
 #define AR9170_MAC_REG_ACK_TABLE		(AR9170_MAC_REG_BASE + 0xC00)
 #define AR9170_MAC_REG_AMPDU_RX_THRESH		(AR9170_MAC_REG_BASE + 0xC50)
 
@@ -312,7 +315,7 @@ struct ar9170_rx_head {
 	u8 plcp[12];
 } __packed;
 
-struct ar9170_rx_tail {
+struct ar9170_rx_phystatus {
 	union {
 		struct {
 			u8 rssi_ant0, rssi_ant1, rssi_ant2,
@@ -324,6 +327,9 @@ struct ar9170_rx_tail {
 
 	u8 evm_stream0[6], evm_stream1[6];
 	u8 phy_err;
+} __packed;
+
+struct ar9170_rx_macstatus {
 	u8 SAidx, DAidx;
 	u8 error;
 	u8 status;
@@ -339,7 +345,7 @@ struct ar9170_rx_tail {
 
 #define AR9170_RX_ENC_SOFTWARE			0x8
 
-static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
+static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_macstatus *t)
 {
 	return (t->SAidx & 0xc0) >> 4 |
 	       (t->DAidx & 0xc0) >> 6;
@@ -357,10 +363,9 @@ static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
 
 #define AR9170_RX_STATUS_MPDU_MASK		0x30
 #define AR9170_RX_STATUS_MPDU_SINGLE		0x00
-#define AR9170_RX_STATUS_MPDU_FIRST		0x10
-#define AR9170_RX_STATUS_MPDU_MIDDLE		0x20
-#define AR9170_RX_STATUS_MPDU_LAST		0x30
-
+#define AR9170_RX_STATUS_MPDU_FIRST		0x20
+#define AR9170_RX_STATUS_MPDU_MIDDLE		0x30
+#define AR9170_RX_STATUS_MPDU_LAST		0x10
 
 #define AR9170_RX_ERROR_RXTO			0x01
 #define AR9170_RX_ERROR_OVERRUN			0x02
@@ -369,9 +374,9 @@ static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
 #define AR9170_RX_ERROR_WRONG_RA		0x10
 #define AR9170_RX_ERROR_PLCP			0x20
 #define AR9170_RX_ERROR_MMIC			0x40
+#define AR9170_RX_ERROR_FATAL			0x80
 
 struct ar9170_cmd_tx_status {
-	__le16 unkn;
 	u8 dst[ETH_ALEN];
 	__le32 rate;
 	__le16 status;
@@ -389,6 +394,7 @@ struct ar9170_cmd_ba_failed_count {
 struct ar9170_cmd_response {
 	u8 flag;
 	u8 type;
+	__le16 padding;
 
 	union {
 		struct ar9170_cmd_tx_status		tx_status;
@@ -414,4 +420,7 @@ enum ar9170_txq {
 	__AR9170_NUM_TXQ,
 };
 
+#define AR9170_TXQ_DEPTH	32
+#define AR9170_TX_MAX_PENDING	128
+
 #endif /* __AR9170_HW_H */
diff --git a/drivers/net/wireless/ar9170/led.c b/drivers/net/wireless/ath/ar9170/led.c
index 341cead7f60..63fda6cd210 100644
--- a/drivers/net/wireless/ar9170/led.c
+++ b/drivers/net/wireless/ath/ar9170/led.c
@@ -74,7 +74,7 @@ static void ar9170_update_leds(struct work_struct *work)
 
 	mutex_lock(&ar->mutex);
 	for (i = 0; i < AR9170_NUM_LEDS; i++)
-		if (ar->leds[i].toggled) {
+		if (ar->leds[i].registered && ar->leds[i].toggled) {
 			led_val |= 1 << i;
 
 			tmp = 70 + 200 / (ar->leds[i].toggled);
@@ -101,9 +101,15 @@ static void ar9170_led_brightness_set(struct led_classdev *led,
 	struct ar9170_led *arl = container_of(led, struct ar9170_led, l);
 	struct ar9170 *ar = arl->ar;
 
-	arl->toggled++;
+	if (unlikely(!arl->registered))
+		return ;
+
+	if (arl->last_state != !!brightness) {
+		arl->toggled++;
+		arl->last_state = !!brightness;
+	}
 
-	if (likely(IS_ACCEPTING_CMD(ar) && brightness))
+	if (likely(IS_ACCEPTING_CMD(ar) && arl->toggled))
 		queue_delayed_work(ar->hw->workqueue, &ar->led_work, HZ/10);
 }
 
@@ -136,13 +142,14 @@ void ar9170_unregister_leds(struct ar9170 *ar)
 {
 	int i;
 
-	cancel_delayed_work_sync(&ar->led_work);
-
 	for (i = 0; i < AR9170_NUM_LEDS; i++)
 		if (ar->leds[i].registered) {
 			led_classdev_unregister(&ar->leds[i].l);
 			ar->leds[i].registered = false;
+			ar->leds[i].toggled = 0;
 		}
+
+	cancel_delayed_work_sync(&ar->led_work);
 }
 
 int ar9170_register_leds(struct ar9170 *ar)
diff --git a/drivers/net/wireless/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index c8fa3073169..d9f1f46de18 100644
--- a/drivers/net/wireless/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -38,6 +38,55 @@
 #include "ar9170.h"
 #include "cmd.h"
 
+int ar9170_set_dyn_sifs_ack(struct ar9170 *ar)
+{
+	u32 val;
+
+	if (conf_is_ht40(&ar->hw->conf))
+		val = 0x010a;
+	else {
+		if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+			val = 0x105;
+		else
+			val = 0x104;
+	}
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_DYNAMIC_SIFS_ACK, val);
+}
+
+int ar9170_set_slot_time(struct ar9170 *ar)
+{
+	u32 slottime = 20;
+
+	if (!ar->vif)
+		return 0;
+
+	if ((ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) ||
+	    ar->vif->bss_conf.use_short_slot)
+		slottime = 9;
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, slottime << 10);
+}
+
+int ar9170_set_basic_rates(struct ar9170 *ar)
+{
+	u8 cck, ofdm;
+
+	if (!ar->vif)
+		return 0;
+
+	ofdm = ar->vif->bss_conf.basic_rates >> 4;
+
+	/* FIXME: is still necessary? */
+	if (ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+		cck = 0;
+	else
+		cck = ar->vif->bss_conf.basic_rates & 0xf;
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_BASIC_RATE,
+				ofdm << 8 | cck);
+}
+
 int ar9170_set_qos(struct ar9170 *ar)
 {
 	ar9170_regwrite_begin(ar);
@@ -72,6 +121,24 @@ int ar9170_set_qos(struct ar9170 *ar)
 	return ar9170_regwrite_result();
 }
 
+static int ar9170_set_ampdu_density(struct ar9170 *ar, u8 mpdudensity)
+{
+	u32 val;
+
+	/* don't allow AMPDU density > 8us */
+	if (mpdudensity > 6)
+		return -EINVAL;
+
+	/* Watch out! Otus uses slightly different density values. */
+	val = 0x140a00 | (mpdudensity ? (mpdudensity + 1) : 0);
+
+	ar9170_regwrite_begin(ar);
+	ar9170_regwrite(AR9170_MAC_REG_AMPDU_DENSITY, val);
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
 int ar9170_init_mac(struct ar9170 *ar)
 {
 	ar9170_regwrite_begin(ar);
@@ -265,9 +332,9 @@ int ar9170_set_operating_mode(struct ar9170 *ar)
 		case NL80211_IFTYPE_ADHOC:
 			pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS;
 			break;
-/*		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_AP:
 			pm_mode |= AR9170_MAC_REG_POWERMGT_AP;
-			break;*/
+			break;
 		case NL80211_IFTYPE_WDS:
 			pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS;
 			break;
@@ -296,6 +363,11 @@ int ar9170_set_operating_mode(struct ar9170 *ar)
 	if (err)
 		return err;
 
+	/* set AMPDU density to 8us. */
+	err = ar9170_set_ampdu_density(ar, 6);
+	if (err)
+		return err;
+
 	ar9170_regwrite_begin(ar);
 
 	ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode);
@@ -316,9 +388,9 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
 	u32 v = 0;
 	u32 pretbtt = 0;
 
-	v |= ar->hw->conf.beacon_int;
-
 	if (ar->vif) {
+		v |= ar->vif->bss_conf.beacon_int;
+
 		switch (ar->vif->type) {
 		case NL80211_IFTYPE_MESH_POINT:
 		case NL80211_IFTYPE_ADHOC:
@@ -326,7 +398,7 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
 			break;
 		case NL80211_IFTYPE_AP:
 			v |= BIT(24);
-			pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
+			pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
 			break;
 		default:
 			break;
@@ -375,10 +447,10 @@ int ar9170_update_beacon(struct ar9170 *ar)
 	/* XXX: use skb->cb info */
 	if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
 		ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
-				((skb->len + 4) << (3+16)) + 0x0400);
+				((skb->len + 4) << (3 + 16)) + 0x0400);
 	else
 		ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
-				((skb->len + 4) << (3+16)) + 0x0400);
+				((skb->len + 4) << 16) + 0x001b);
 
 	ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4);
 	ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS);
diff --git a/drivers/net/wireless/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 5996ff9f7f4..9d38cf60a0d 100644
--- a/drivers/net/wireless/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -142,73 +142,153 @@ static struct ieee80211_channel ar9170_5ghz_chantable[] = {
 };
 #undef CHAN
 
+#define AR9170_HT_CAP							\
+{									\
+	.ht_supported	= true,						\
+	.cap		= IEEE80211_HT_CAP_MAX_AMSDU |			\
+			  IEEE80211_HT_CAP_SUP_WIDTH_20_40 |		\
+			  IEEE80211_HT_CAP_SGI_40 |			\
+			  IEEE80211_HT_CAP_DSSSCCK40 |			\
+			  IEEE80211_HT_CAP_SM_PS,			\
+	.ampdu_factor	= 3,						\
+	.ampdu_density	= 6,						\
+	.mcs		= {						\
+		.rx_mask = { 0xFF, 0xFF, 0, 0, 0, 0, 0, 0, 0, 0, },	\
+	},								\
+}
+
 static struct ieee80211_supported_band ar9170_band_2GHz = {
 	.channels	= ar9170_2ghz_chantable,
 	.n_channels	= ARRAY_SIZE(ar9170_2ghz_chantable),
 	.bitrates	= ar9170_g_ratetable,
 	.n_bitrates	= ar9170_g_ratetable_size,
+	.ht_cap		= AR9170_HT_CAP,
 };
 
-#ifdef AR9170_QUEUE_DEBUG
-/*
- * In case some wants works with AR9170's crazy tx_status queueing techniques.
- * He might need this rather useful probing function.
- *
- * NOTE: caller must hold the queue's spinlock!
- */
+static struct ieee80211_supported_band ar9170_band_5GHz = {
+	.channels	= ar9170_5ghz_chantable,
+	.n_channels	= ARRAY_SIZE(ar9170_5ghz_chantable),
+	.bitrates	= ar9170_a_ratetable,
+	.n_bitrates	= ar9170_a_ratetable_size,
+	.ht_cap		= AR9170_HT_CAP,
+};
 
+static void ar9170_tx(struct ar9170 *ar);
+
+#ifdef AR9170_QUEUE_DEBUG
 static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ar9170_tx_control *txc = (void *) skb->data;
-	struct ieee80211_hdr *hdr = (void *)txc->frame_data;
+	struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+	struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
+	struct ieee80211_hdr *hdr = (void *) txc->frame_data;
 
-	printk(KERN_DEBUG "%s: => FRAME [skb:%p, queue:%d, DA:[%pM] "
-			  "mac_control:%04x, phy_control:%08x]\n",
+	printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] flags:%x "
+			  "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
 	       wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb),
-	       ieee80211_get_DA(hdr), le16_to_cpu(txc->mac_control),
-	       le32_to_cpu(txc->phy_control));
+	       ieee80211_get_DA(hdr), arinfo->flags,
+	       le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
+	       jiffies_to_msecs(arinfo->timeout - jiffies));
 }
 
-static void ar9170_dump_station_tx_status_queue(struct ar9170 *ar,
-						struct sk_buff_head *queue)
+static void __ar9170_dump_txqueue(struct ar9170 *ar,
+				struct sk_buff_head *queue)
 {
 	struct sk_buff *skb;
 	int i = 0;
 
 	printk(KERN_DEBUG "---[ cut here ]---\n");
-	printk(KERN_DEBUG "%s: %d entries in tx_status queue.\n",
+	printk(KERN_DEBUG "%s: %d entries in queue.\n",
 	       wiphy_name(ar->hw->wiphy), skb_queue_len(queue));
 
 	skb_queue_walk(queue, skb) {
-		struct ar9170_tx_control *txc = (void *) skb->data;
-		struct ieee80211_hdr *hdr = (void *)txc->frame_data;
-
-		printk(KERN_DEBUG "index:%d => \n", i);
+		printk(KERN_DEBUG "index:%d => \n", i++);
 		ar9170_print_txheader(ar, skb);
 	}
+	if (i != skb_queue_len(queue))
+		printk(KERN_DEBUG "WARNING: queue frame counter "
+		       "mismatch %d != %d\n", skb_queue_len(queue), i);
 	printk(KERN_DEBUG "---[ end ]---\n");
 }
-#endif /* AR9170_QUEUE_DEBUG */
 
-static struct ieee80211_supported_band ar9170_band_5GHz = {
-	.channels	= ar9170_5ghz_chantable,
-	.n_channels	= ARRAY_SIZE(ar9170_5ghz_chantable),
-	.bitrates	= ar9170_a_ratetable,
-	.n_bitrates	= ar9170_a_ratetable_size,
-};
+static void ar9170_dump_txqueue(struct ar9170 *ar,
+				struct sk_buff_head *queue)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->lock, flags);
+	__ar9170_dump_txqueue(ar, queue);
+	spin_unlock_irqrestore(&queue->lock, flags);
+}
 
-void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
-			     bool valid_status, u16 tx_status)
+static void __ar9170_dump_txstats(struct ar9170 *ar)
+{
+	int i;
+
+	printk(KERN_DEBUG "%s: QoS queue stats\n",
+	       wiphy_name(ar->hw->wiphy));
+
+	for (i = 0; i < __AR9170_NUM_TXQ; i++)
+		printk(KERN_DEBUG "%s: queue:%d limit:%d len:%d waitack:%d\n",
+		       wiphy_name(ar->hw->wiphy), i, ar->tx_stats[i].limit,
+		       ar->tx_stats[i].len, skb_queue_len(&ar->tx_status[i]));
+}
+
+static void ar9170_dump_txstats(struct ar9170 *ar)
 {
-	struct ieee80211_tx_info *txinfo;
-	unsigned int retries = 0, queue = skb_get_queue_mapping(skb);
 	unsigned long flags;
 
 	spin_lock_irqsave(&ar->tx_stats_lock, flags);
-	ar->tx_stats[queue].len--;
-	if (ieee80211_queue_stopped(ar->hw, queue))
-		ieee80211_wake_queue(ar->hw, queue);
+	__ar9170_dump_txstats(ar);
 	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+}
+#endif /* AR9170_QUEUE_DEBUG */
+
+/* caller must guarantee exclusive access for _bin_ queue. */
+static void ar9170_recycle_expired(struct ar9170 *ar,
+				   struct sk_buff_head *queue,
+				   struct sk_buff_head *bin)
+{
+	struct sk_buff *skb, *old = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->lock, flags);
+	while ((skb = skb_peek(queue))) {
+		struct ieee80211_tx_info *txinfo;
+		struct ar9170_tx_info *arinfo;
+
+		txinfo = IEEE80211_SKB_CB(skb);
+		arinfo = (void *) txinfo->rate_driver_data;
+
+		if (time_is_before_jiffies(arinfo->timeout)) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: [%ld > %ld] frame expired => "
+			       "recycle \n", wiphy_name(ar->hw->wiphy),
+			       jiffies, arinfo->timeout);
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+			__skb_unlink(skb, queue);
+			__skb_queue_tail(bin, skb);
+		} else {
+			break;
+		}
+
+		if (unlikely(old == skb)) {
+			/* bail out - queue is shot. */
+
+			WARN_ON(1);
+			break;
+		}
+		old = skb;
+	}
+	spin_unlock_irqrestore(&queue->lock, flags);
+}
+
+static void ar9170_tx_status(struct ar9170 *ar, struct sk_buff *skb,
+				    u16 tx_status)
+{
+	struct ieee80211_tx_info *txinfo;
+	unsigned int retries = 0;
 
 	txinfo = IEEE80211_SKB_CB(skb);
 	ieee80211_tx_info_clear_status(txinfo);
@@ -230,45 +310,61 @@ void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
 		break;
 	}
 
-	if (valid_status)
-		txinfo->status.rates[0].count = retries + 1;
-
+	txinfo->status.rates[0].count = retries + 1;
 	skb_pull(skb, sizeof(struct ar9170_tx_control));
 	ieee80211_tx_status_irqsafe(ar->hw, skb);
 }
 
-static struct sk_buff *ar9170_find_skb_in_queue(struct ar9170 *ar,
-						const u8 *mac,
-						const u32 queue,
-						struct sk_buff_head *q)
+void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
 {
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ar9170_tx_info *arinfo = (void *) info->rate_driver_data;
+	unsigned int queue = skb_get_queue_mapping(skb);
 	unsigned long flags;
-	struct sk_buff *skb;
 
-	spin_lock_irqsave(&q->lock, flags);
-	skb_queue_walk(q, skb) {
-		struct ar9170_tx_control *txc = (void *) skb->data;
-		struct ieee80211_hdr *hdr = (void *) txc->frame_data;
-		u32 txc_queue = (le32_to_cpu(txc->phy_control) &
-				AR9170_TX_PHY_QOS_MASK) >>
-				AR9170_TX_PHY_QOS_SHIFT;
+	spin_lock_irqsave(&ar->tx_stats_lock, flags);
+	ar->tx_stats[queue].len--;
 
-		if  ((queue != txc_queue) ||
-		     (compare_ether_addr(ieee80211_get_DA(hdr), mac)))
-			continue;
+	if (skb_queue_empty(&ar->tx_pending[queue])) {
+#ifdef AR9170_QUEUE_STOP_DEBUG
+		printk(KERN_DEBUG "%s: wake queue %d\n",
+		       wiphy_name(ar->hw->wiphy), queue);
+		__ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_STOP_DEBUG */
+		ieee80211_wake_queue(ar->hw, queue);
+	}
+	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
 
-		__skb_unlink(skb, q);
-		spin_unlock_irqrestore(&q->lock, flags);
-		return skb;
+	if (arinfo->flags & AR9170_TX_FLAG_BLOCK_ACK) {
+		dev_kfree_skb_any(skb);
+	} else if (arinfo->flags & AR9170_TX_FLAG_WAIT_FOR_ACK) {
+		arinfo->timeout = jiffies +
+				  msecs_to_jiffies(AR9170_TX_TIMEOUT);
+
+		skb_queue_tail(&ar->tx_status[queue], skb);
+	} else if (arinfo->flags & AR9170_TX_FLAG_NO_ACK) {
+		ar9170_tx_status(ar, skb, AR9170_TX_STATUS_FAILED);
+	} else {
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: unsupported frame flags!\n",
+		       wiphy_name(ar->hw->wiphy));
+		ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+		dev_kfree_skb_any(skb);
+	}
+
+	if (!ar->tx_stats[queue].len &&
+	    !skb_queue_empty(&ar->tx_pending[queue])) {
+		ar9170_tx(ar);
 	}
-	spin_unlock_irqrestore(&q->lock, flags);
-	return NULL;
 }
 
-static struct sk_buff *ar9170_find_queued_skb(struct ar9170 *ar, const u8 *mac,
-					      const u32 queue)
+static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar,
+					     const u8 *mac,
+					     struct sk_buff_head *queue,
+					     const u32 rate)
 {
-	struct ieee80211_sta *sta;
+	unsigned long flags;
 	struct sk_buff *skb;
 
 	/*
@@ -279,85 +375,94 @@ static struct sk_buff *ar9170_find_queued_skb(struct ar9170 *ar, const u8 *mac,
 	 * the firmware provided (-> destination MAC, and phy_control) -
 	 * and hope that we picked the right one...
 	 */
-	rcu_read_lock();
-	sta = ieee80211_find_sta(ar->hw, mac);
-
-	if (likely(sta)) {
-		struct ar9170_sta_info *sta_priv = (void *) sta->drv_priv;
-		skb = skb_dequeue(&sta_priv->tx_status[queue]);
-		rcu_read_unlock();
-		if (likely(skb))
-			return skb;
-	} else
-		rcu_read_unlock();
-
-	/* scan the waste queue for candidates */
-	skb = ar9170_find_skb_in_queue(ar, mac, queue,
-				       &ar->global_tx_status_waste);
-	if (!skb) {
-		/* so it still _must_ be in the global list. */
-		skb = ar9170_find_skb_in_queue(ar, mac, queue,
-					       &ar->global_tx_status);
-	}
 
+	spin_lock_irqsave(&queue->lock, flags);
+	skb_queue_walk(queue, skb) {
+		struct ar9170_tx_control *txc = (void *) skb->data;
+		struct ieee80211_hdr *hdr = (void *) txc->frame_data;
+		u32 r;
+
+		if (mac && compare_ether_addr(ieee80211_get_DA(hdr), mac)) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: skip frame => DA %pM != %pM\n",
+			       wiphy_name(ar->hw->wiphy), mac,
+			       ieee80211_get_DA(hdr));
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+			continue;
+		}
+
+		r = (le32_to_cpu(txc->phy_control) & AR9170_TX_PHY_MCS_MASK) >>
+		    AR9170_TX_PHY_MCS_SHIFT;
+
+		if ((rate != AR9170_TX_INVALID_RATE) && (r != rate)) {
 #ifdef AR9170_QUEUE_DEBUG
-	if (unlikely((!skb) && net_ratelimit())) {
-		printk(KERN_ERR "%s: ESS:[%pM] does not have any "
-				"outstanding frames in this queue (%d).\n",
-				wiphy_name(ar->hw->wiphy), mac, queue);
+			printk(KERN_DEBUG "%s: skip frame => rate %d != %d\n",
+			       wiphy_name(ar->hw->wiphy), rate, r);
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+			continue;
+		}
+
+		__skb_unlink(skb, queue);
+		spin_unlock_irqrestore(&queue->lock, flags);
+		return skb;
 	}
+
+#ifdef AR9170_QUEUE_DEBUG
+	printk(KERN_ERR "%s: ESS:[%pM] does not have any "
+			"outstanding frames in queue.\n",
+			wiphy_name(ar->hw->wiphy), mac);
+	__ar9170_dump_txqueue(ar, queue);
 #endif /* AR9170_QUEUE_DEBUG */
-	return skb;
+	spin_unlock_irqrestore(&queue->lock, flags);
+
+	return NULL;
 }
 
 /*
- * This worker tries to keep the global tx_status queue empty.
- * So we can guarantee that incoming tx_status reports for
- * unregistered stations are always synced with the actual
- * frame - which we think - belongs to.
+ * This worker tries to keeps an maintain tx_status queues.
+ * So we can guarantee that incoming tx_status reports are
+ * actually for a pending frame.
  */
 
-static void ar9170_tx_status_janitor(struct work_struct *work)
+static void ar9170_tx_janitor(struct work_struct *work)
 {
 	struct ar9170 *ar = container_of(work, struct ar9170,
-					 tx_status_janitor.work);
-	struct sk_buff *skb;
+					 tx_janitor.work);
+	struct sk_buff_head waste;
+	unsigned int i;
+	bool resched = false;
 
 	if (unlikely(!IS_STARTED(ar)))
 		return ;
 
-	mutex_lock(&ar->mutex);
-	/* recycle the garbage back to mac80211... one by one. */
-	while ((skb = skb_dequeue(&ar->global_tx_status_waste))) {
+	skb_queue_head_init(&waste);
+
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
 #ifdef AR9170_QUEUE_DEBUG
-		printk(KERN_DEBUG "%s: dispose queued frame =>\n",
-		       wiphy_name(ar->hw->wiphy));
-		ar9170_print_txheader(ar, skb);
+		printk(KERN_DEBUG "%s: garbage collector scans queue:%d\n",
+		       wiphy_name(ar->hw->wiphy), i);
+		ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
+		ar9170_dump_txqueue(ar, &ar->tx_status[i]);
 #endif /* AR9170_QUEUE_DEBUG */
-		ar9170_handle_tx_status(ar, skb, false,
-					AR9170_TX_STATUS_FAILED);
-	}
 
-	while ((skb = skb_dequeue(&ar->global_tx_status))) {
-#ifdef AR9170_QUEUE_DEBUG
-		printk(KERN_DEBUG "%s: moving frame into waste queue =>\n",
-		       wiphy_name(ar->hw->wiphy));
+		ar9170_recycle_expired(ar, &ar->tx_status[i], &waste);
+		ar9170_recycle_expired(ar, &ar->tx_pending[i], &waste);
+		skb_queue_purge(&waste);
 
-		ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
-		skb_queue_tail(&ar->global_tx_status_waste, skb);
+		if (!skb_queue_empty(&ar->tx_status[i]) ||
+		    !skb_queue_empty(&ar->tx_pending[i]))
+			resched = true;
 	}
 
-	/* recall the janitor in 100ms - if there's garbage in the can. */
-	if (skb_queue_len(&ar->global_tx_status_waste) > 0)
-		queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor,
-				   msecs_to_jiffies(100));
-
-	mutex_unlock(&ar->mutex);
+	if (resched)
+		queue_delayed_work(ar->hw->workqueue,
+				   &ar->tx_janitor,
+				   msecs_to_jiffies(AR9170_JANITOR_DELAY));
 }
 
-static void ar9170_handle_command_response(struct ar9170 *ar,
-					   void *buf, u32 len)
+void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
 {
 	struct ar9170_cmd_response *cmd = (void *) buf;
 
@@ -381,15 +486,21 @@ static void ar9170_handle_command_response(struct ar9170 *ar,
 		 */
 
 		struct sk_buff *skb;
-		u32 queue = (le32_to_cpu(cmd->tx_status.rate) &
-			    AR9170_TX_PHY_QOS_MASK) >> AR9170_TX_PHY_QOS_SHIFT;
+		u32 phy = le32_to_cpu(cmd->tx_status.rate);
+		u32 q = (phy & AR9170_TX_PHY_QOS_MASK) >>
+			AR9170_TX_PHY_QOS_SHIFT;
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: recv tx_status for %pM, p:%08x, q:%d\n",
+		       wiphy_name(ar->hw->wiphy), cmd->tx_status.dst, phy, q);
+#endif /* AR9170_QUEUE_DEBUG */
 
-		skb = ar9170_find_queued_skb(ar, cmd->tx_status.dst, queue);
+		skb = ar9170_get_queued_skb(ar, cmd->tx_status.dst,
+					    &ar->tx_status[q],
+					    AR9170_TX_INVALID_RATE);
 		if (unlikely(!skb))
 			return ;
 
-		ar9170_handle_tx_status(ar, skb, true,
-					le16_to_cpu(cmd->tx_status.status));
+		ar9170_tx_status(ar, skb, le16_to_cpu(cmd->tx_status.status));
 		break;
 		}
 
@@ -429,6 +540,38 @@ static void ar9170_handle_command_response(struct ar9170 *ar,
 		/* retransmission issue / SIFS/EIFS collision ?! */
 		break;
 
+	/* firmware debug */
+	case 0xca:
+		printk(KERN_DEBUG "ar9170 FW: %.*s\n", len - 4, (char *)buf + 4);
+		break;
+	case 0xcb:
+		len -= 4;
+
+		switch (len) {
+		case 1:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.2x\n",
+				*((char *)buf + 4));
+			break;
+		case 2:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.4x\n",
+				le16_to_cpup((__le16 *)((char *)buf + 4)));
+			break;
+		case 4:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.8x\n",
+				le32_to_cpup((__le32 *)((char *)buf + 4)));
+			break;
+		case 8:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.16lx\n",
+				(unsigned long)le64_to_cpup(
+						(__le64 *)((char *)buf + 4)));
+			break;
+		}
+		break;
+	case 0xcc:
+		print_hex_dump_bytes("ar9170 FW:", DUMP_PREFIX_NONE,
+				     (char *)buf + 4, len - 4);
+		break;
+
 	default:
 		printk(KERN_INFO "received unhandled event %x\n", cmd->type);
 		print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
@@ -436,214 +579,430 @@ static void ar9170_handle_command_response(struct ar9170 *ar,
 	}
 }
 
-/*
- * If the frame alignment is right (or the kernel has
- * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
- * is only a single MPDU in the USB frame, then we can
- * submit to mac80211 the SKB directly. However, since
- * there may be multiple packets in one SKB in stream
- * mode, and we need to observe the proper ordering,
- * this is non-trivial.
- */
-static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
+static void ar9170_rx_reset_rx_mpdu(struct ar9170 *ar)
 {
-	struct sk_buff *skb;
-	struct ar9170_rx_head *head = (void *)buf;
-	struct ar9170_rx_tail *tail;
-	struct ieee80211_rx_status status;
-	int mpdu_len, i;
-	u8 error, antennas = 0, decrypt;
-	__le16 fc;
-	int reserved;
+	memset(&ar->rx_mpdu.plcp, 0, sizeof(struct ar9170_rx_head));
+	ar->rx_mpdu.has_plcp = false;
+}
 
-	if (unlikely(!IS_STARTED(ar)))
-		return ;
+int ar9170_nag_limiter(struct ar9170 *ar)
+{
+	bool print_message;
+
+	/*
+	 * we expect all sorts of errors in promiscuous mode.
+	 * don't bother with it, it's OK!
+	 */
+	if (ar->sniffer_enabled)
+		return false;
+
+	/*
+	 * only go for frequent errors! The hardware tends to
+	 * do some stupid thing once in a while under load, in
+	 * noisy environments or just for fun!
+	 */
+	if (time_before(jiffies, ar->bad_hw_nagger) && net_ratelimit())
+		print_message = true;
+	else
+		print_message = false;
+
+	/* reset threshold for "once in a while" */
+	ar->bad_hw_nagger = jiffies + HZ / 4;
+	return print_message;
+}
+
+static int ar9170_rx_mac_status(struct ar9170 *ar,
+				struct ar9170_rx_head *head,
+				struct ar9170_rx_macstatus *mac,
+				struct ieee80211_rx_status *status)
+{
+	u8 error, decrypt;
 
-	/* Received MPDU */
-	mpdu_len = len;
-	mpdu_len -= sizeof(struct ar9170_rx_head);
-	mpdu_len -= sizeof(struct ar9170_rx_tail);
 	BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12);
-	BUILD_BUG_ON(sizeof(struct ar9170_rx_tail) != 24);
+	BUILD_BUG_ON(sizeof(struct ar9170_rx_macstatus) != 4);
 
-	if (mpdu_len <= FCS_LEN)
-		return;
+	error = mac->error;
+	if (error & AR9170_RX_ERROR_MMIC) {
+		status->flag |= RX_FLAG_MMIC_ERROR;
+		error &= ~AR9170_RX_ERROR_MMIC;
+	}
 
-	tail = (void *)(buf + sizeof(struct ar9170_rx_head) + mpdu_len);
+	if (error & AR9170_RX_ERROR_PLCP) {
+		status->flag |= RX_FLAG_FAILED_PLCP_CRC;
+		error &= ~AR9170_RX_ERROR_PLCP;
 
-	for (i = 0; i < 3; i++)
-		if (tail->rssi[i] != 0x80)
-			antennas |= BIT(i);
+		if (!(ar->filter_state & FIF_PLCPFAIL))
+			return -EINVAL;
+	}
 
-	/* post-process RSSI */
-	for (i = 0; i < 7; i++)
-		if (tail->rssi[i] & 0x80)
-			tail->rssi[i] = ((tail->rssi[i] & 0x7f) + 1) & 0x7f;
+	if (error & AR9170_RX_ERROR_FCS) {
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+		error &= ~AR9170_RX_ERROR_FCS;
 
-	memset(&status, 0, sizeof(status));
+		if (!(ar->filter_state & FIF_FCSFAIL))
+			return -EINVAL;
+	}
+
+	decrypt = ar9170_get_decrypt_type(mac);
+	if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
+	    decrypt != AR9170_ENC_ALG_NONE)
+		status->flag |= RX_FLAG_DECRYPTED;
+
+	/* ignore wrong RA errors */
+	error &= ~AR9170_RX_ERROR_WRONG_RA;
+
+	if (error & AR9170_RX_ERROR_DECRYPT) {
+		error &= ~AR9170_RX_ERROR_DECRYPT;
+		/*
+		 * Rx decryption is done in place,
+		 * the original data is lost anyway.
+		 */
+
+		return -EINVAL;
+	}
+
+	/* drop any other error frames */
+	if (unlikely(error)) {
+		/* TODO: update netdevice's RX dropped/errors statistics */
+
+		if (ar9170_nag_limiter(ar))
+			printk(KERN_DEBUG "%s: received frame with "
+			       "suspicious error code (%#x).\n",
+			       wiphy_name(ar->hw->wiphy), error);
+
+		return -EINVAL;
+	}
 
-	status.band = ar->channel->band;
-	status.freq = ar->channel->center_freq;
-	status.signal = ar->noise[0] + tail->rssi_combined;
-	status.noise = ar->noise[0];
-	status.antenna = antennas;
+	status->band = ar->channel->band;
+	status->freq = ar->channel->center_freq;
 
-	switch (tail->status & AR9170_RX_STATUS_MODULATION_MASK) {
+	switch (mac->status & AR9170_RX_STATUS_MODULATION_MASK) {
 	case AR9170_RX_STATUS_MODULATION_CCK:
-		if (tail->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
-			status.flag |= RX_FLAG_SHORTPRE;
+		if (mac->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
+			status->flag |= RX_FLAG_SHORTPRE;
 		switch (head->plcp[0]) {
 		case 0x0a:
-			status.rate_idx = 0;
+			status->rate_idx = 0;
 			break;
 		case 0x14:
-			status.rate_idx = 1;
+			status->rate_idx = 1;
 			break;
 		case 0x37:
-			status.rate_idx = 2;
+			status->rate_idx = 2;
 			break;
 		case 0x6e:
-			status.rate_idx = 3;
+			status->rate_idx = 3;
 			break;
 		default:
-			if ((!ar->sniffer_enabled) && (net_ratelimit()))
+			if (ar9170_nag_limiter(ar))
 				printk(KERN_ERR "%s: invalid plcp cck rate "
 				       "(%x).\n", wiphy_name(ar->hw->wiphy),
 				       head->plcp[0]);
-			return;
+			return -EINVAL;
 		}
 		break;
+
 	case AR9170_RX_STATUS_MODULATION_OFDM:
-		switch (head->plcp[0] & 0xF) {
-		case 0xB:
-			status.rate_idx = 0;
+		switch (head->plcp[0] & 0xf) {
+		case 0xb:
+			status->rate_idx = 0;
 			break;
-		case 0xF:
-			status.rate_idx = 1;
+		case 0xf:
+			status->rate_idx = 1;
 			break;
-		case 0xA:
-			status.rate_idx = 2;
+		case 0xa:
+			status->rate_idx = 2;
 			break;
-		case 0xE:
-			status.rate_idx = 3;
+		case 0xe:
+			status->rate_idx = 3;
 			break;
 		case 0x9:
-			status.rate_idx = 4;
+			status->rate_idx = 4;
 			break;
-		case 0xD:
-			status.rate_idx = 5;
+		case 0xd:
+			status->rate_idx = 5;
 			break;
 		case 0x8:
-			status.rate_idx = 6;
+			status->rate_idx = 6;
 			break;
-		case 0xC:
-			status.rate_idx = 7;
+		case 0xc:
+			status->rate_idx = 7;
 			break;
 		default:
-			if ((!ar->sniffer_enabled) && (net_ratelimit()))
+			if (ar9170_nag_limiter(ar))
 				printk(KERN_ERR "%s: invalid plcp ofdm rate "
 				       "(%x).\n", wiphy_name(ar->hw->wiphy),
 				       head->plcp[0]);
-			return;
+			return -EINVAL;
 		}
-		if (status.band == IEEE80211_BAND_2GHZ)
-			status.rate_idx += 4;
+		if (status->band == IEEE80211_BAND_2GHZ)
+			status->rate_idx += 4;
 		break;
+
 	case AR9170_RX_STATUS_MODULATION_HT:
+		if (head->plcp[3] & 0x80)
+			status->flag |= RX_FLAG_40MHZ;
+		if (head->plcp[6] & 0x80)
+			status->flag |= RX_FLAG_SHORT_GI;
+
+		status->rate_idx = clamp(0, 75, head->plcp[6] & 0x7f);
+		status->flag |= RX_FLAG_HT;
+		break;
+
 	case AR9170_RX_STATUS_MODULATION_DUPOFDM:
 		/* XXX */
-
-		if (net_ratelimit())
+		if (ar9170_nag_limiter(ar))
 			printk(KERN_ERR "%s: invalid modulation\n",
 			       wiphy_name(ar->hw->wiphy));
-		return;
+		return -EINVAL;
 	}
 
-	error = tail->error;
+	return 0;
+}
+
+static void ar9170_rx_phy_status(struct ar9170 *ar,
+				 struct ar9170_rx_phystatus *phy,
+				 struct ieee80211_rx_status *status)
+{
+	int i;
 
-	if (error & AR9170_RX_ERROR_MMIC) {
-		status.flag |= RX_FLAG_MMIC_ERROR;
-		error &= ~AR9170_RX_ERROR_MMIC;
-	}
+	BUILD_BUG_ON(sizeof(struct ar9170_rx_phystatus) != 20);
 
-	if (error & AR9170_RX_ERROR_PLCP) {
-		status.flag |= RX_FLAG_FAILED_PLCP_CRC;
-		error &= ~AR9170_RX_ERROR_PLCP;
+	for (i = 0; i < 3; i++)
+		if (phy->rssi[i] != 0x80)
+			status->antenna |= BIT(i);
+
+	/* post-process RSSI */
+	for (i = 0; i < 7; i++)
+		if (phy->rssi[i] & 0x80)
+			phy->rssi[i] = ((phy->rssi[i] & 0x7f) + 1) & 0x7f;
+
+	/* TODO: we could do something with phy_errors */
+	status->signal = ar->noise[0] + phy->rssi_combined;
+	status->noise = ar->noise[0];
+}
+
+static struct sk_buff *ar9170_rx_copy_data(u8 *buf, int len)
+{
+	struct sk_buff *skb;
+	int reserved = 0;
+	struct ieee80211_hdr *hdr = (void *) buf;
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		reserved += NET_IP_ALIGN;
+
+		if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
+			reserved += NET_IP_ALIGN;
 	}
 
-	if (error & AR9170_RX_ERROR_FCS) {
-		status.flag |= RX_FLAG_FAILED_FCS_CRC;
-		error &= ~AR9170_RX_ERROR_FCS;
+	if (ieee80211_has_a4(hdr->frame_control))
+		reserved += NET_IP_ALIGN;
+
+	reserved = 32 + (reserved & NET_IP_ALIGN);
+
+	skb = dev_alloc_skb(len + reserved);
+	if (likely(skb)) {
+		skb_reserve(skb, reserved);
+		memcpy(skb_put(skb, len), buf, len);
 	}
 
-	decrypt = ar9170_get_decrypt_type(tail);
-	if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
-	    decrypt != AR9170_ENC_ALG_NONE)
-		status.flag |= RX_FLAG_DECRYPTED;
+	return skb;
+}
 
-	/* ignore wrong RA errors */
-	error &= ~AR9170_RX_ERROR_WRONG_RA;
+/*
+ * If the frame alignment is right (or the kernel has
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
+ * is only a single MPDU in the USB frame, then we could
+ * submit to mac80211 the SKB directly. However, since
+ * there may be multiple packets in one SKB in stream
+ * mode, and we need to observe the proper ordering,
+ * this is non-trivial.
+ */
 
-	if (error & AR9170_RX_ERROR_DECRYPT) {
-		error &= ~AR9170_RX_ERROR_DECRYPT;
+static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
+{
+	struct ar9170_rx_head *head;
+	struct ar9170_rx_macstatus *mac;
+	struct ar9170_rx_phystatus *phy = NULL;
+	struct ieee80211_rx_status status;
+	struct sk_buff *skb;
+	int mpdu_len;
+
+	if (unlikely(!IS_STARTED(ar) || len < (sizeof(*mac))))
+		return ;
+
+	/* Received MPDU */
+	mpdu_len = len - sizeof(*mac);
+
+	mac = (void *)(buf + mpdu_len);
+	if (unlikely(mac->error & AR9170_RX_ERROR_FATAL)) {
+		/* this frame is too damaged and can't be used - drop it */
 
-		/*
-		 * Rx decryption is done in place,
-		 * the original data is lost anyway.
-		 */
 		return ;
 	}
 
-	/* drop any other error frames */
-	if ((error) && (net_ratelimit())) {
-		printk(KERN_DEBUG "%s: errors: %#x\n",
-		       wiphy_name(ar->hw->wiphy), error);
-		return;
+	switch (mac->status & AR9170_RX_STATUS_MPDU_MASK) {
+	case AR9170_RX_STATUS_MPDU_FIRST:
+		/* first mpdu packet has the plcp header */
+		if (likely(mpdu_len >= sizeof(struct ar9170_rx_head))) {
+			head = (void *) buf;
+			memcpy(&ar->rx_mpdu.plcp, (void *) buf,
+			       sizeof(struct ar9170_rx_head));
+
+			mpdu_len -= sizeof(struct ar9170_rx_head);
+			buf += sizeof(struct ar9170_rx_head);
+			ar->rx_mpdu.has_plcp = true;
+		} else {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: plcp info is clipped.\n",
+				       wiphy_name(ar->hw->wiphy));
+			return ;
+		}
+		break;
+
+	case AR9170_RX_STATUS_MPDU_LAST:
+		/* last mpdu has a extra tail with phy status information */
+
+		if (likely(mpdu_len >= sizeof(struct ar9170_rx_phystatus))) {
+			mpdu_len -= sizeof(struct ar9170_rx_phystatus);
+			phy = (void *)(buf + mpdu_len);
+		} else {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: frame tail is clipped.\n",
+				       wiphy_name(ar->hw->wiphy));
+			return ;
+		}
+
+	case AR9170_RX_STATUS_MPDU_MIDDLE:
+		/* middle mpdus are just data */
+		if (unlikely(!ar->rx_mpdu.has_plcp)) {
+			if (!ar9170_nag_limiter(ar))
+				return ;
+
+			printk(KERN_ERR "%s: rx stream did not start "
+					"with a first_mpdu frame tag.\n",
+			       wiphy_name(ar->hw->wiphy));
+
+			return ;
+		}
+
+		head = &ar->rx_mpdu.plcp;
+		break;
+
+	case AR9170_RX_STATUS_MPDU_SINGLE:
+		/* single mpdu - has plcp (head) and phy status (tail) */
+		head = (void *) buf;
+
+		mpdu_len -= sizeof(struct ar9170_rx_head);
+		mpdu_len -= sizeof(struct ar9170_rx_phystatus);
+
+		buf += sizeof(struct ar9170_rx_head);
+		phy = (void *)(buf + mpdu_len);
+		break;
+
+	default:
+		BUG_ON(1);
+		break;
 	}
 
-	buf += sizeof(struct ar9170_rx_head);
-	fc = *(__le16 *)buf;
+	if (unlikely(mpdu_len < FCS_LEN))
+		return ;
 
-	if (ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc))
-		reserved = 32 + 2;
-	else
-		reserved = 32;
+	memset(&status, 0, sizeof(status));
+	if (unlikely(ar9170_rx_mac_status(ar, head, mac, &status)))
+		return ;
 
-	skb = dev_alloc_skb(mpdu_len + reserved);
-	if (!skb)
-		return;
+	if (phy)
+		ar9170_rx_phy_status(ar, phy, &status);
 
-	skb_reserve(skb, reserved);
-	memcpy(skb_put(skb, mpdu_len), buf, mpdu_len);
-	ieee80211_rx_irqsafe(ar->hw, skb, &status);
+	skb = ar9170_rx_copy_data(buf, mpdu_len);
+	if (likely(skb))
+		ieee80211_rx_irqsafe(ar->hw, skb, &status);
 }
 
 void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
 {
-	unsigned int i, tlen, resplen;
+	unsigned int i, tlen, resplen, wlen = 0, clen = 0;
 	u8 *tbuf, *respbuf;
 
 	tbuf = skb->data;
 	tlen = skb->len;
 
 	while (tlen >= 4) {
-		int clen = tbuf[1] << 8 | tbuf[0];
-		int wlen = (clen + 3) & ~3;
+		clen = tbuf[1] << 8 | tbuf[0];
+		wlen = ALIGN(clen, 4);
 
-		/*
-		 * parse stream (if any)
-		 */
+		/* check if this is stream has a valid tag.*/
 		if (tbuf[2] != 0 || tbuf[3] != 0x4e) {
-			printk(KERN_ERR "%s: missing tag!\n",
-			       wiphy_name(ar->hw->wiphy));
+			/*
+			 * TODO: handle the highly unlikely event that the
+			 * corrupted stream has the TAG at the right position.
+			 */
+
+			/* check if the frame can be repaired. */
+			if (!ar->rx_failover_missing) {
+				/* this is no "short read". */
+				if (ar9170_nag_limiter(ar)) {
+					printk(KERN_ERR "%s: missing tag!\n",
+					       wiphy_name(ar->hw->wiphy));
+					goto err_telluser;
+				} else
+					goto err_silent;
+			}
+
+			if (ar->rx_failover_missing > tlen) {
+				if (ar9170_nag_limiter(ar)) {
+					printk(KERN_ERR "%s: possible multi "
+					       "stream corruption!\n",
+					       wiphy_name(ar->hw->wiphy));
+					goto err_telluser;
+				} else
+					goto err_silent;
+			}
+
+			memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
+			ar->rx_failover_missing -= tlen;
+
+			if (ar->rx_failover_missing <= 0) {
+				/*
+				 * nested ar9170_rx call!
+				 * termination is guranteed, even when the
+				 * combined frame also have a element with
+				 * a bad tag.
+				 */
+
+				ar->rx_failover_missing = 0;
+				ar9170_rx(ar, ar->rx_failover);
+
+				skb_reset_tail_pointer(ar->rx_failover);
+				skb_trim(ar->rx_failover, 0);
+			}
+
 			return ;
 		}
+
+		/* check if stream is clipped */
 		if (wlen > tlen - 4) {
-			printk(KERN_ERR "%s: invalid RX (%d, %d, %d)\n",
-			       wiphy_name(ar->hw->wiphy), clen, wlen, tlen);
-			print_hex_dump(KERN_DEBUG, "data: ",
-				       DUMP_PREFIX_OFFSET,
-				       16, 1, tbuf, tlen, true);
+			if (ar->rx_failover_missing) {
+				/* TODO: handle double stream corruption. */
+				if (ar9170_nag_limiter(ar)) {
+					printk(KERN_ERR "%s: double rx stream "
+					       "corruption!\n",
+						wiphy_name(ar->hw->wiphy));
+					goto err_telluser;
+				} else
+					goto err_silent;
+			}
+
+			/*
+			 * save incomplete data set.
+			 * the firmware will resend the missing bits when
+			 * the rx - descriptor comes round again.
+			 */
+
+			memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
+			ar->rx_failover_missing = clen - tlen;
 			return ;
 		}
 		resplen = clen;
@@ -668,12 +1027,44 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
 		if (i == 12)
 			ar9170_handle_command_response(ar, respbuf, resplen);
 		else
-			ar9170_handle_mpdu(ar, respbuf, resplen);
+			ar9170_handle_mpdu(ar, respbuf, clen);
 	}
 
-	if (tlen)
-		printk(KERN_ERR "%s: buffer remains!\n",
-		       wiphy_name(ar->hw->wiphy));
+	if (tlen) {
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: %d bytes of unprocessed "
+					"data left in rx stream!\n",
+			       wiphy_name(ar->hw->wiphy), tlen);
+
+		goto err_telluser;
+	}
+
+	return ;
+
+err_telluser:
+	printk(KERN_ERR "%s: damaged RX stream data [want:%d, "
+			"data:%d, rx:%d, pending:%d ]\n",
+	       wiphy_name(ar->hw->wiphy), clen, wlen, tlen,
+	       ar->rx_failover_missing);
+
+	if (ar->rx_failover_missing)
+		print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET,
+				     ar->rx_failover->data,
+				     ar->rx_failover->len);
+
+	print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET,
+			     skb->data, skb->len);
+
+	printk(KERN_ERR "%s: please check your hardware and cables, if "
+			"you see this message frequently.\n",
+	       wiphy_name(ar->hw->wiphy));
+
+err_silent:
+	if (ar->rx_failover_missing) {
+		skb_reset_tail_pointer(ar->rx_failover);
+		skb_trim(ar->rx_failover, 0);
+		ar->rx_failover_missing = 0;
+	}
 }
 
 #define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop)		\
@@ -691,10 +1082,12 @@ static int ar9170_op_start(struct ieee80211_hw *hw)
 
 	mutex_lock(&ar->mutex);
 
+	ar->filter_changed = 0;
+
 	/* reinitialize queues statistics */
 	memset(&ar->tx_stats, 0, sizeof(ar->tx_stats));
-	for (i = 0; i < ARRAY_SIZE(ar->tx_stats); i++)
-		ar->tx_stats[i].limit = 8;
+	for (i = 0; i < __AR9170_NUM_TXQ; i++)
+		ar->tx_stats[i].limit = AR9170_TXQ_DEPTH;
 
 	/* reset QoS defaults */
 	AR9170_FILL_QUEUE(ar->edcf[0], 3, 15, 1023,  0); /* BEST EFFORT*/
@@ -703,6 +1096,8 @@ static int ar9170_op_start(struct ieee80211_hw *hw)
 	AR9170_FILL_QUEUE(ar->edcf[3], 2, 3,     7, 47); /* VOICE */
 	AR9170_FILL_QUEUE(ar->edcf[4], 2, 3,     7,  0); /* SPECIAL */
 
+	ar->bad_hw_nagger = jiffies;
+
 	err = ar->open(ar);
 	if (err)
 		goto out;
@@ -738,17 +1133,17 @@ out:
 static void ar9170_op_stop(struct ieee80211_hw *hw)
 {
 	struct ar9170 *ar = hw->priv;
+	unsigned int i;
 
 	if (IS_STARTED(ar))
 		ar->state = AR9170_IDLE;
 
-	mutex_lock(&ar->mutex);
+	flush_workqueue(ar->hw->workqueue);
 
-	cancel_delayed_work_sync(&ar->tx_status_janitor);
+	cancel_delayed_work_sync(&ar->tx_janitor);
 	cancel_work_sync(&ar->filter_config_work);
 	cancel_work_sync(&ar->beacon_work);
-	skb_queue_purge(&ar->global_tx_status_waste);
-	skb_queue_purge(&ar->global_tx_status);
+	mutex_lock(&ar->mutex);
 
 	if (IS_ACCEPTING_CMD(ar)) {
 		ar9170_set_leds_state(ar, 0);
@@ -758,51 +1153,32 @@ static void ar9170_op_stop(struct ieee80211_hw *hw)
 		ar->stop(ar);
 	}
 
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
+		skb_queue_purge(&ar->tx_pending[i]);
+		skb_queue_purge(&ar->tx_status[i]);
+	}
 	mutex_unlock(&ar->mutex);
 }
 
-int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 {
-	struct ar9170 *ar = hw->priv;
 	struct ieee80211_hdr *hdr;
 	struct ar9170_tx_control *txc;
 	struct ieee80211_tx_info *info;
-	struct ieee80211_rate *rate = NULL;
 	struct ieee80211_tx_rate *txrate;
+	struct ar9170_tx_info *arinfo;
 	unsigned int queue = skb_get_queue_mapping(skb);
-	unsigned long flags = 0;
-	struct ar9170_sta_info *sta_info = NULL;
-	u32 power, chains;
 	u16 keytype = 0;
 	u16 len, icv = 0;
-	int err;
-	bool tx_status;
 
-	if (unlikely(!IS_STARTED(ar)))
-		goto err_free;
+	BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
 
 	hdr = (void *)skb->data;
 	info = IEEE80211_SKB_CB(skb);
 	len = skb->len;
 
-	spin_lock_irqsave(&ar->tx_stats_lock, flags);
-	if (ar->tx_stats[queue].limit < ar->tx_stats[queue].len) {
-		spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-		return NETDEV_TX_OK;
-	}
-
-	ar->tx_stats[queue].len++;
-	ar->tx_stats[queue].count++;
-	if (ar->tx_stats[queue].limit == ar->tx_stats[queue].len)
-		ieee80211_stop_queue(hw, queue);
-
-	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-
 	txc = (void *)skb_push(skb, sizeof(*txc));
 
-	tx_status = (((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) != 0) ||
-		    ((info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) != 0));
-
 	if (info->control.hw_key) {
 		icv = info->control.hw_key->icv_len;
 
@@ -818,7 +1194,7 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 			break;
 		default:
 			WARN_ON(1);
-			goto err_dequeue;
+			goto err_out;
 		}
 	}
 
@@ -835,16 +1211,65 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
 		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK);
 
-	if (info->flags & IEEE80211_TX_CTL_AMPDU)
-		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
-
 	txrate = &info->control.rates[0];
-
 	if (txrate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
 		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
 	else if (txrate->flags & IEEE80211_TX_RC_USE_RTS_CTS)
 		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
 
+	arinfo = (void *)info->rate_driver_data;
+	arinfo->timeout = jiffies + msecs_to_jiffies(AR9170_QUEUE_TIMEOUT);
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	     (is_valid_ether_addr(ieee80211_get_DA(hdr)))) {
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+			if (unlikely(!info->control.sta))
+				goto err_out;
+
+			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
+			arinfo->flags = AR9170_TX_FLAG_BLOCK_ACK;
+			goto out;
+		}
+
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
+		/*
+		 * WARNING:
+		 * Putting the QoS queue bits into an unexplored territory is
+		 * certainly not elegant.
+		 *
+		 * In my defense: This idea provides a reasonable way to
+		 * smuggle valuable information to the tx_status callback.
+		 * Also, the idea behind this bit-abuse came straight from
+		 * the original driver code.
+		 */
+
+		txc->phy_control |=
+			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
+		arinfo->flags = AR9170_TX_FLAG_WAIT_FOR_ACK;
+	} else {
+		arinfo->flags = AR9170_TX_FLAG_NO_ACK;
+	}
+
+out:
+	return 0;
+
+err_out:
+	skb_pull(skb, sizeof(*txc));
+	return -EINVAL;
+}
+
+static void ar9170_tx_prepare_phy(struct ar9170 *ar, struct sk_buff *skb)
+{
+	struct ar9170_tx_control *txc;
+	struct ieee80211_tx_info *info;
+	struct ieee80211_rate *rate = NULL;
+	struct ieee80211_tx_rate *txrate;
+	u32 power, chains;
+
+	txc = (void *) skb->data;
+	info = IEEE80211_SKB_CB(skb);
+	txrate = &info->control.rates[0];
+
 	if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
 		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD);
 
@@ -864,9 +1289,12 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		u32 r = txrate->idx;
 		u8 *txpower;
 
+		/* heavy clip control */
+		txc->phy_control |= cpu_to_le32((r & 0x7) << 7);
+
 		r <<= AR9170_TX_PHY_MCS_SHIFT;
-		if (WARN_ON(r & ~AR9170_TX_PHY_MCS_MASK))
-			goto err_dequeue;
+		BUG_ON(r & ~AR9170_TX_PHY_MCS_MASK);
+
 		txc->phy_control |= cpu_to_le32(r & AR9170_TX_PHY_MCS_MASK);
 		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_MOD_HT);
 
@@ -928,53 +1356,154 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 			chains = AR9170_TX_PHY_TXCHAIN_1;
 	}
 	txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT);
+}
 
-	if (tx_status) {
-		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
-		/*
-		 * WARNING:
-		 * Putting the QoS queue bits into an unexplored territory is
-		 * certainly not elegant.
-		 *
-		 * In my defense: This idea provides a reasonable way to
-		 * smuggle valuable information to the tx_status callback.
-		 * Also, the idea behind this bit-abuse came straight from
-		 * the original driver code.
-		 */
+static void ar9170_tx(struct ar9170 *ar)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	struct ieee80211_tx_info *info;
+	struct ar9170_tx_info *arinfo;
+	unsigned int i, frames, frames_failed, remaining_space;
+	int err;
+	bool schedule_garbagecollector = false;
 
-		txc->phy_control |=
-			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
+	BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
 
-		if (info->control.sta) {
-			sta_info = (void *) info->control.sta->drv_priv;
-			skb_queue_tail(&sta_info->tx_status[queue], skb);
-		} else {
-			skb_queue_tail(&ar->global_tx_status, skb);
+	if (unlikely(!IS_STARTED(ar)))
+		return ;
+
+	remaining_space = AR9170_TX_MAX_PENDING;
+
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
+		spin_lock_irqsave(&ar->tx_stats_lock, flags);
+		if (ar->tx_stats[i].len >= ar->tx_stats[i].limit) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: queue %d full\n",
+			       wiphy_name(ar->hw->wiphy), i);
+
+			__ar9170_dump_txstats(ar);
+			printk(KERN_DEBUG "stuck frames: ===> \n");
+			ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
+			ar9170_dump_txqueue(ar, &ar->tx_status[i]);
+#endif /* AR9170_QUEUE_DEBUG */
+			ieee80211_stop_queue(ar->hw, i);
+			spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+			continue;
+		}
+
+		frames = min(ar->tx_stats[i].limit - ar->tx_stats[i].len,
+			     skb_queue_len(&ar->tx_pending[i]));
+
+		if (remaining_space < frames) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: tx quota reached queue:%d, "
+			       "remaining slots:%d, needed:%d\n",
+			       wiphy_name(ar->hw->wiphy), i, remaining_space,
+			       frames);
+
+			ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_DEBUG */
+			frames = remaining_space;
+		}
+
+		ar->tx_stats[i].len += frames;
+		ar->tx_stats[i].count += frames;
+		spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+
+		if (!frames)
+			continue;
+
+		frames_failed = 0;
+		while (frames) {
+			skb = skb_dequeue(&ar->tx_pending[i]);
+			if (unlikely(!skb)) {
+				frames_failed += frames;
+				frames = 0;
+				break;
+			}
+
+			info = IEEE80211_SKB_CB(skb);
+			arinfo = (void *) info->rate_driver_data;
+
+			/* TODO: cancel stuck frames */
+			arinfo->timeout = jiffies +
+					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
+
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: send frame q:%d =>\n",
+			       wiphy_name(ar->hw->wiphy), i);
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+
+			err = ar->tx(ar, skb);
+			if (unlikely(err)) {
+				frames_failed++;
+				dev_kfree_skb_any(skb);
+			} else {
+				remaining_space--;
+				schedule_garbagecollector = true;
+			}
+
+			frames--;
+		}
+
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: ar9170_tx report for queue %d\n",
+		       wiphy_name(ar->hw->wiphy), i);
 
-			queue_delayed_work(ar->hw->workqueue,
-					   &ar->tx_status_janitor,
-					   msecs_to_jiffies(100));
+		printk(KERN_DEBUG "%s: unprocessed pending frames left:\n",
+		       wiphy_name(ar->hw->wiphy));
+		ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
+#endif /* AR9170_QUEUE_DEBUG */
+
+		if (unlikely(frames_failed)) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: frames failed =>\n",
+			       wiphy_name(ar->hw->wiphy), frames_failed);
+#endif /* AR9170_QUEUE_DEBUG */
+
+			spin_lock_irqsave(&ar->tx_stats_lock, flags);
+			ar->tx_stats[i].len -= frames_failed;
+			ar->tx_stats[i].count -= frames_failed;
+			ieee80211_wake_queue(ar->hw, i);
+			spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
 		}
 	}
 
-	err = ar->tx(ar, skb, tx_status, 0);
-	if (unlikely(tx_status && err)) {
-		if (info->control.sta)
-			skb_unlink(skb, &sta_info->tx_status[queue]);
-		else
-			skb_unlink(skb, &ar->global_tx_status);
+	if (schedule_garbagecollector)
+		queue_delayed_work(ar->hw->workqueue,
+				   &ar->tx_janitor,
+				   msecs_to_jiffies(AR9170_JANITOR_DELAY));
+}
+
+int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct ar9170 *ar = hw->priv;
+	struct ieee80211_tx_info *info;
+
+	if (unlikely(!IS_STARTED(ar)))
+		goto err_free;
+
+	if (unlikely(ar9170_tx_prepare(ar, skb)))
+		goto err_free;
+
+	info = IEEE80211_SKB_CB(skb);
+	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+		/* drop frame, we do not allow TX A-MPDU aggregation yet. */
+		goto err_free;
+	} else {
+		unsigned int queue = skb_get_queue_mapping(skb);
+
+		ar9170_tx_prepare_phy(ar, skb);
+		skb_queue_tail(&ar->tx_pending[queue], skb);
 	}
 
+	ar9170_tx(ar);
 	return NETDEV_TX_OK;
 
-err_dequeue:
-	spin_lock_irqsave(&ar->tx_stats_lock, flags);
-	ar->tx_stats[queue].len--;
-	ar->tx_stats[queue].count--;
-	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-
 err_free:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
@@ -1037,11 +1566,6 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&ar->mutex);
 
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		/* TODO */
-		err = 0;
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 		/* TODO */
 		err = 0;
@@ -1068,48 +1592,28 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
 			goto out;
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
+	if (changed & BSS_CHANGED_BEACON_INT) {
 		err = ar9170_set_beacon_timers(ar);
 		if (err)
 			goto out;
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		err = ar9170_set_channel(ar, hw->conf.channel,
-					 AR9170_RFI_NONE, AR9170_BW_20);
+
+		/* adjust slot time for 5 GHz */
+		err = ar9170_set_slot_time(ar);
 		if (err)
 			goto out;
-		/* adjust slot time for 5 GHz */
-		if (hw->conf.channel->band == IEEE80211_BAND_5GHZ)
-			err = ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME,
-					       9 << 10);
-	}
-
-out:
-	mutex_unlock(&ar->mutex);
-	return err;
-}
-
-static int ar9170_op_config_interface(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif,
-				      struct ieee80211_if_conf *conf)
-{
-	struct ar9170 *ar = hw->priv;
-	int err = 0;
-
-	mutex_lock(&ar->mutex);
 
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		memcpy(ar->bssid, conf->bssid, ETH_ALEN);
-		err = ar9170_set_operating_mode(ar);
-	}
-
-	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		err = ar9170_update_beacon(ar);
+		err = ar9170_set_dyn_sifs_ack(ar);
+		if (err)
+			goto out;
 
+		err = ar9170_set_channel(ar, hw->conf.channel,
+				AR9170_RFI_NONE,
+				nl80211_to_ar9170(hw->conf.channel_type));
 		if (err)
 			goto out;
-		err = ar9170_set_beacon_timers(ar);
 	}
 
 out:
@@ -1123,24 +1627,30 @@ static void ar9170_set_filters(struct work_struct *work)
 					 filter_config_work);
 	int err;
 
-	mutex_lock(&ar->mutex);
 	if (unlikely(!IS_STARTED(ar)))
-		goto unlock;
+		return ;
 
-	if (ar->filter_changed & AR9170_FILTER_CHANGED_PROMISC) {
+	mutex_lock(&ar->mutex);
+	if (test_and_clear_bit(AR9170_FILTER_CHANGED_MODE,
+			       &ar->filter_changed)) {
 		err = ar9170_set_operating_mode(ar);
 		if (err)
 			goto unlock;
 	}
 
-	if (ar->filter_changed & AR9170_FILTER_CHANGED_MULTICAST) {
+	if (test_and_clear_bit(AR9170_FILTER_CHANGED_MULTICAST,
+			       &ar->filter_changed)) {
 		err = ar9170_update_multicast(ar);
 		if (err)
 			goto unlock;
 	}
 
-	if (ar->filter_changed & AR9170_FILTER_CHANGED_FRAMEFILTER)
+	if (test_and_clear_bit(AR9170_FILTER_CHANGED_FRAMEFILTER,
+			       &ar->filter_changed)) {
 		err = ar9170_update_frame_filter(ar);
+		if (err)
+			goto unlock;
+	}
 
 unlock:
 	mutex_unlock(&ar->mutex);
@@ -1155,8 +1665,8 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 
 	/* mask supported flags */
 	*new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC |
-		      FIF_PROMISC_IN_BSS;
-
+		      FIF_PROMISC_IN_BSS | FIF_FCSFAIL | FIF_PLCPFAIL;
+	ar->filter_state = *new_flags;
 	/*
 	 * We can support more by setting the sniffer bit and
 	 * then checking the error flags, later.
@@ -1170,7 +1680,7 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 			int i;
 
 			/* always get broadcast frames */
-			mchash = 1ULL << (0xff>>2);
+			mchash = 1ULL << (0xff >> 2);
 
 			for (i = 0; i < mc_count; i++) {
 				if (WARN_ON(!mclist))
@@ -1180,7 +1690,7 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 			}
 		ar->want_mc_hash = mchash;
 		}
-		ar->filter_changed |= AR9170_FILTER_CHANGED_MULTICAST;
+		set_bit(AR9170_FILTER_CHANGED_MULTICAST, &ar->filter_changed);
 	}
 
 	if (changed_flags & FIF_CONTROL) {
@@ -1196,12 +1706,14 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 		else
 			ar->want_filter = ar->cur_filter & ~filter;
 
-		ar->filter_changed |= AR9170_FILTER_CHANGED_FRAMEFILTER;
+		set_bit(AR9170_FILTER_CHANGED_FRAMEFILTER,
+			&ar->filter_changed);
 	}
 
 	if (changed_flags & FIF_PROMISC_IN_BSS) {
 		ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0;
-		ar->filter_changed |= AR9170_FILTER_CHANGED_PROMISC;
+		set_bit(AR9170_FILTER_CHANGED_MODE,
+			&ar->filter_changed);
 	}
 
 	if (likely(IS_STARTED(ar)))
@@ -1218,48 +1730,54 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->mutex);
 
-	ar9170_regwrite_begin(ar);
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN);
+		err = ar9170_set_operating_mode(ar);
+		if (err)
+			goto out;
+	}
 
-	if (changed & BSS_CHANGED_ASSOC) {
-		ar->state = bss_conf->assoc ? AR9170_ASSOCIATED : ar->state;
+	if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) {
+		err = ar9170_update_beacon(ar);
+		if (err)
+			goto out;
 
+		err = ar9170_set_beacon_timers(ar);
+		if (err)
+			goto out;
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
 #ifndef CONFIG_AR9170_LEDS
 		/* enable assoc LED. */
 		err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0);
 #endif /* CONFIG_AR9170_LEDS */
 	}
 
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		err = ar9170_set_beacon_timers(ar);
+		if (err)
+			goto out;
+	}
+
 	if (changed & BSS_CHANGED_HT) {
 		/* TODO */
 		err = 0;
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
-		u32 slottime = 20;
-
-		if (bss_conf->use_short_slot)
-			slottime = 9;
-
-		ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, slottime << 10);
+		err = ar9170_set_slot_time(ar);
+		if (err)
+			goto out;
 	}
 
 	if (changed & BSS_CHANGED_BASIC_RATES) {
-		u32 cck, ofdm;
-
-		if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) {
-			ofdm = bss_conf->basic_rates;
-			cck = 0;
-		} else {
-			/* four cck rates */
-			cck = bss_conf->basic_rates & 0xf;
-			ofdm = bss_conf->basic_rates >> 4;
-		}
-		ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE,
-				ofdm << 8 | cck);
+		err = ar9170_set_basic_rates(ar);
+		if (err)
+			goto out;
 	}
 
-	ar9170_regwrite_finish();
-	err = ar9170_regwrite_result();
+out:
 	mutex_unlock(&ar->mutex);
 }
 
@@ -1298,7 +1816,7 @@ static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 
 	switch (key->alg) {
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			ktype = AR9170_ENC_ALG_WEP64;
 		else
 			ktype = AR9170_ENC_ALG_WEP128;
@@ -1411,43 +1929,6 @@ static void ar9170_sta_notify(struct ieee80211_hw *hw,
 			      enum sta_notify_cmd cmd,
 			      struct ieee80211_sta *sta)
 {
-	struct ar9170 *ar = hw->priv;
-	struct ar9170_sta_info *info = (void *) sta->drv_priv;
-	struct sk_buff *skb;
-	unsigned int i;
-
-	switch (cmd) {
-	case STA_NOTIFY_ADD:
-		for (i = 0; i < ar->hw->queues; i++)
-			skb_queue_head_init(&info->tx_status[i]);
-		break;
-
-	case STA_NOTIFY_REMOVE:
-
-		/*
-		 * transfer all outstanding frames that need a tx_status
-		 * reports to the global tx_status queue
-		 */
-
-		for (i = 0; i < ar->hw->queues; i++) {
-			while ((skb = skb_dequeue(&info->tx_status[i]))) {
-#ifdef AR9170_QUEUE_DEBUG
-				printk(KERN_DEBUG "%s: queueing frame in "
-					  "global tx_status queue =>\n",
-				       wiphy_name(ar->hw->wiphy));
-
-				ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
-				skb_queue_tail(&ar->global_tx_status, skb);
-			}
-		}
-		queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor,
-				   msecs_to_jiffies(100));
-		break;
-
-	default:
-		break;
-	}
 }
 
 static int ar9170_get_stats(struct ieee80211_hw *hw,
@@ -1486,7 +1967,7 @@ static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	int ret;
 
 	mutex_lock(&ar->mutex);
-	if ((param) && !(queue > ar->hw->queues)) {
+	if ((param) && !(queue > __AR9170_NUM_TXQ)) {
 		memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
 		       param, sizeof(*param));
 
@@ -1498,6 +1979,24 @@ static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	return ret;
 }
 
+static int ar9170_ampdu_action(struct ieee80211_hw *hw,
+			       enum ieee80211_ampdu_mlme_action action,
+			       struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+{
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+	case IEEE80211_AMPDU_RX_STOP:
+		/*
+		 * Something goes wrong -- RX locks up
+		 * after a while of receiving aggregated
+		 * frames -- not enabling for now.
+		 */
+		return -EOPNOTSUPP;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct ieee80211_ops ar9170_ops = {
 	.start			= ar9170_op_start,
 	.stop			= ar9170_op_stop,
@@ -1505,7 +2004,6 @@ static const struct ieee80211_ops ar9170_ops = {
 	.add_interface		= ar9170_op_add_interface,
 	.remove_interface	= ar9170_op_remove_interface,
 	.config			= ar9170_op_config,
-	.config_interface	= ar9170_op_config_interface,
 	.configure_filter	= ar9170_op_configure_filter,
 	.conf_tx		= ar9170_conf_tx,
 	.bss_info_changed	= ar9170_op_bss_info_changed,
@@ -1514,29 +2012,45 @@ static const struct ieee80211_ops ar9170_ops = {
 	.sta_notify		= ar9170_sta_notify,
 	.get_stats		= ar9170_get_stats,
 	.get_tx_stats		= ar9170_get_tx_stats,
+	.ampdu_action		= ar9170_ampdu_action,
 };
 
 void *ar9170_alloc(size_t priv_size)
 {
 	struct ieee80211_hw *hw;
 	struct ar9170 *ar;
+	struct sk_buff *skb;
 	int i;
 
+	/*
+	 * this buffer is used for rx stream reconstruction.
+	 * Under heavy load this device (or the transport layer?)
+	 * tends to split the streams into seperate rx descriptors.
+	 */
+
+	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
+	if (!skb)
+		goto err_nomem;
+
 	hw = ieee80211_alloc_hw(priv_size, &ar9170_ops);
 	if (!hw)
-		return ERR_PTR(-ENOMEM);
+		goto err_nomem;
 
 	ar = hw->priv;
 	ar->hw = hw;
+	ar->rx_failover = skb;
 
 	mutex_init(&ar->mutex);
 	spin_lock_init(&ar->cmdlock);
 	spin_lock_init(&ar->tx_stats_lock);
-	skb_queue_head_init(&ar->global_tx_status);
-	skb_queue_head_init(&ar->global_tx_status_waste);
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
+		skb_queue_head_init(&ar->tx_status[i]);
+		skb_queue_head_init(&ar->tx_pending[i]);
+	}
+	ar9170_rx_reset_rx_mpdu(ar);
 	INIT_WORK(&ar->filter_config_work, ar9170_set_filters);
 	INIT_WORK(&ar->beacon_work, ar9170_new_beacon);
-	INIT_DELAYED_WORK(&ar->tx_status_janitor, ar9170_tx_status_janitor);
+	INIT_DELAYED_WORK(&ar->tx_janitor, ar9170_tx_janitor);
 
 	/* all hw supports 2.4 GHz, so set channel to 1 by default */
 	ar->channel = &ar9170_2ghz_chantable[0];
@@ -1561,6 +2075,10 @@ void *ar9170_alloc(size_t priv_size)
 		ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */
 
 	return ar;
+
+err_nomem:
+	kfree_skb(skb);
+	return ERR_PTR(-ENOMEM);
 }
 
 static int ar9170_read_eeprom(struct ar9170 *ar)
@@ -1619,12 +2137,24 @@ static int ar9170_read_eeprom(struct ar9170 *ar)
 	else
 		ar->hw->channel_change_time = 80 * 1000;
 
+	ar->regulatory.current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]);
+	ar->regulatory.current_rd_ext = le16_to_cpu(ar->eeprom.reg_domain[1]);
+
 	/* second part of wiphy init */
 	SET_IEEE80211_PERM_ADDR(ar->hw, addr);
 
 	return bands ? 0 : -EINVAL;
 }
 
+static int ar9170_reg_notifier(struct wiphy *wiphy,
+			struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ar9170 *ar = hw->priv;
+
+	return ath_reg_notifier_apply(wiphy, request, &ar->regulatory);
+}
+
 int ar9170_register(struct ar9170 *ar, struct device *pdev)
 {
 	int err;
@@ -1634,10 +2164,18 @@ int ar9170_register(struct ar9170 *ar, struct device *pdev)
 	if (err)
 		goto err_out;
 
+	err = ath_regd_init(&ar->regulatory, ar->hw->wiphy,
+			    ar9170_reg_notifier);
+	if (err)
+		goto err_out;
+
 	err = ieee80211_register_hw(ar->hw);
 	if (err)
 		goto err_out;
 
+	if (!ath_is_world_regd(&ar->regulatory))
+		regulatory_hint(ar->hw->wiphy, ar->regulatory.alpha2);
+
 	err = ar9170_init_leds(ar);
 	if (err)
 		goto err_unreg;
@@ -1666,6 +2204,7 @@ void ar9170_unregister(struct ar9170 *ar)
 	ar9170_unregister_leds(ar);
 #endif /* CONFIG_AR9170_LEDS */
 
+	kfree_skb(ar->rx_failover);
 	ieee80211_unregister_hw(ar->hw);
 	mutex_destroy(&ar->mutex);
 }
diff --git a/drivers/net/wireless/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index 6ce20754b8e..df86f70cd81 100644
--- a/drivers/net/wireless/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -401,7 +401,7 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
 	int i, err;
 	u32 val;
 	bool is_2ghz = band == IEEE80211_BAND_2GHZ;
-	bool is_40mhz = false; /* XXX: for now */
+	bool is_40mhz = conf_is_ht40(&ar->hw->conf);
 
 	ar9170_regwrite_begin(ar);
 
@@ -1200,7 +1200,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 		return -ENOSYS;
 	}
 
-	if (0 /* 2 streams capable */)
+	if (ar->eeprom.tx_mask != 1)
 		tmp |= 0x100;
 
 	err = ar9170_write_reg(ar, 0x1c5804, tmp);
@@ -1214,7 +1214,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 	freqpar = ar9170_get_hw_dyn_params(channel, bw);
 
 	vals[0] = cpu_to_le32(channel->center_freq * 1000);
-	vals[1] = cpu_to_le32(bw == AR9170_BW_20 ? 0 : 1);
+	vals[1] = cpu_to_le32(conf_is_ht40(&ar->hw->conf));
 	vals[2] = cpu_to_le32(offs << 2 | 1);
 	vals[3] = cpu_to_le32(freqpar->coeff_exp);
 	vals[4] = cpu_to_le32(freqpar->coeff_man);
diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index fddda477095..754b1f8d8da 100644
--- a/drivers/net/wireless/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -51,9 +51,14 @@ MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
+MODULE_FIRMWARE("ar9170.fw");
 MODULE_FIRMWARE("ar9170-1.fw");
 MODULE_FIRMWARE("ar9170-2.fw");
 
+enum ar9170_requirements {
+	AR9170_REQ_FW1_ONLY = 1,
+};
+
 static struct usb_device_id ar9170_usb_ids[] = {
 	/* Atheros 9170 */
 	{ USB_DEVICE(0x0cf3, 0x9170) },
@@ -81,25 +86,74 @@ static struct usb_device_id ar9170_usb_ids[] = {
 	{ USB_DEVICE(0x2019, 0x5304) },
 	/* IO-Data WNGDNUS2 */
 	{ USB_DEVICE(0x04bb, 0x093f) },
+	/* AVM FRITZ!WLAN USB Stick N */
+	{ USB_DEVICE(0x057C, 0x8401) },
+	/* AVM FRITZ!WLAN USB Stick N 2.4 */
+	{ USB_DEVICE(0x057C, 0x8402), .driver_info = AR9170_REQ_FW1_ONLY },
 
 	/* terminate */
 	{}
 };
 MODULE_DEVICE_TABLE(usb, ar9170_usb_ids);
 
-static void ar9170_usb_tx_urb_complete_free(struct urb *urb)
+static void ar9170_usb_submit_urb(struct ar9170_usb *aru)
+{
+	struct urb *urb;
+	unsigned long flags;
+	int err;
+
+	if (unlikely(!IS_STARTED(&aru->common)))
+		return ;
+
+	spin_lock_irqsave(&aru->tx_urb_lock, flags);
+	if (aru->tx_submitted_urbs >= AR9170_NUM_TX_URBS) {
+		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
+		return ;
+	}
+	aru->tx_submitted_urbs++;
+
+	urb = usb_get_from_anchor(&aru->tx_pending);
+	if (!urb) {
+		aru->tx_submitted_urbs--;
+		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
+
+		return ;
+	}
+	spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
+
+	aru->tx_pending_urbs--;
+	usb_anchor_urb(urb, &aru->tx_submitted);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (unlikely(err)) {
+		if (ar9170_nag_limiter(&aru->common))
+			dev_err(&aru->udev->dev, "submit_urb failed (%d).\n",
+				err);
+
+		usb_unanchor_urb(urb);
+		aru->tx_submitted_urbs--;
+		ar9170_tx_callback(&aru->common, urb->context);
+	}
+
+	usb_free_urb(urb);
+}
+
+static void ar9170_usb_tx_urb_complete_frame(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
 	struct ar9170_usb *aru = (struct ar9170_usb *)
 	      usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 
-	if (!aru) {
+	if (unlikely(!aru)) {
 		dev_kfree_skb_irq(skb);
 		return ;
 	}
 
-	ar9170_handle_tx_status(&aru->common, skb, false,
-				AR9170_TX_STATUS_COMPLETE);
+	aru->tx_submitted_urbs--;
+
+	ar9170_tx_callback(&aru->common, skb);
+
+	ar9170_usb_submit_urb(aru);
 }
 
 static void ar9170_usb_tx_urb_complete(struct urb *urb)
@@ -126,8 +180,8 @@ static void ar9170_usb_irq_completed(struct urb *urb)
 		goto resubmit;
 	}
 
-	print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET,
-			     urb->transfer_buffer, urb->actual_length);
+	ar9170_handle_command_response(&aru->common, urb->transfer_buffer,
+				       urb->actual_length);
 
 resubmit:
 	usb_anchor_urb(urb, &aru->rx_submitted);
@@ -177,16 +231,15 @@ resubmit:
 
 	usb_anchor_urb(urb, &aru->rx_submitted);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err) {
+	if (unlikely(err)) {
 		usb_unanchor_urb(urb);
-		dev_kfree_skb_irq(skb);
+		goto free;
 	}
 
 	return ;
 
 free:
 	dev_kfree_skb_irq(skb);
-	return;
 }
 
 static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru,
@@ -282,21 +335,47 @@ err_out:
 	return err;
 }
 
-static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru)
+static int ar9170_usb_flush(struct ar9170 *ar)
 {
-	int ret;
+	struct ar9170_usb *aru = (void *) ar;
+	struct urb *urb;
+	int ret, err = 0;
 
-	aru->common.state = AR9170_UNKNOWN_STATE;
+	if (IS_STARTED(ar))
+		aru->common.state = AR9170_IDLE;
 
-	usb_unlink_anchored_urbs(&aru->tx_submitted);
+	usb_wait_anchor_empty_timeout(&aru->tx_pending,
+					    msecs_to_jiffies(800));
+	while ((urb = usb_get_from_anchor(&aru->tx_pending))) {
+		ar9170_tx_callback(&aru->common, (void *) urb->context);
+		usb_free_urb(urb);
+	}
 
-	/* give the LED OFF command and the deauth frame a chance to air. */
+	/* lets wait a while until the tx - queues are dried out */
 	ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
 					    msecs_to_jiffies(100));
 	if (ret == 0)
-		dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
-	usb_poison_anchored_urbs(&aru->tx_submitted);
+		err = -ETIMEDOUT;
+
+	usb_kill_anchored_urbs(&aru->tx_submitted);
 
+	if (IS_ACCEPTING_CMD(ar))
+		aru->common.state = AR9170_STARTED;
+
+	return err;
+}
+
+static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru)
+{
+	int err;
+
+	aru->common.state = AR9170_UNKNOWN_STATE;
+
+	err = ar9170_usb_flush(&aru->common);
+	if (err)
+		dev_err(&aru->udev->dev, "stuck tx urbs!\n");
+
+	usb_poison_anchored_urbs(&aru->tx_submitted);
 	usb_poison_anchored_urbs(&aru->rx_submitted);
 }
 
@@ -337,7 +416,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
 
 	usb_anchor_urb(urb, &aru->tx_submitted);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err) {
+	if (unlikely(err)) {
 		usb_unanchor_urb(urb);
 		usb_free_urb(urb);
 		goto err_unbuf;
@@ -350,7 +429,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
 		goto err_unbuf;
 	}
 
-	if (outlen >= 0 && aru->readlen != outlen) {
+	if (aru->readlen != outlen) {
 		err = -EMSGSIZE;
 		goto err_unbuf;
 	}
@@ -380,12 +459,10 @@ err_free:
 	return err;
 }
 
-static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb,
-			 bool txstatus_needed, unsigned int extra_len)
+static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ar9170_usb *aru = (struct ar9170_usb *) ar;
 	struct urb *urb;
-	int err;
 
 	if (unlikely(!IS_STARTED(ar))) {
 		/* Seriously, what were you drink... err... thinking!? */
@@ -398,18 +475,17 @@ static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb,
 
 	usb_fill_bulk_urb(urb, aru->udev,
 			  usb_sndbulkpipe(aru->udev, AR9170_EP_TX),
-			  skb->data, skb->len + extra_len, (txstatus_needed ?
-			  ar9170_usb_tx_urb_complete :
-			  ar9170_usb_tx_urb_complete_free), skb);
+			  skb->data, skb->len,
+			  ar9170_usb_tx_urb_complete_frame, skb);
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
-	usb_anchor_urb(urb, &aru->tx_submitted);
-	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (unlikely(err))
-		usb_unanchor_urb(urb);
+	usb_anchor_urb(urb, &aru->tx_pending);
+	aru->tx_pending_urbs++;
 
 	usb_free_urb(urb);
-	return err;
+
+	ar9170_usb_submit_urb(aru);
+	return 0;
 }
 
 static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
@@ -418,7 +494,7 @@ static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
 	unsigned long flags;
 	u32 in, out;
 
-	if (!buffer)
+	if (unlikely(!buffer))
 		return ;
 
 	in = le32_to_cpup((__le32 *)buffer);
@@ -504,17 +580,29 @@ static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
 {
 	int err = 0;
 
-	err = request_firmware(&aru->init_values, "ar9170-1.fw",
+	err = request_firmware(&aru->firmware, "ar9170.fw",
 			       &aru->udev->dev);
-	if (err) {
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
-		return err;
+	if (!err) {
+		aru->init_values = NULL;
+		return 0;
 	}
 
+	if (aru->req_one_stage_fw) {
+		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+			"not found and is required for this device\n");
+		return -EINVAL;
+	}
+
+	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+		"not found, trying old firmware...\n");
+
+	err = request_firmware(&aru->init_values, "ar9170-1.fw",
+			       &aru->udev->dev);
+
 	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
 	if (err) {
 		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
 		return err;
 	}
 
@@ -548,6 +636,9 @@ static int ar9170_usb_upload_firmware(struct ar9170_usb *aru)
 {
 	int err;
 
+	if (!aru->init_values)
+		goto upload_fw_start;
+
 	/* First, upload initial values to device RAM */
 	err = ar9170_usb_upload(aru, aru->init_values->data,
 				aru->init_values->size, 0x102800, false);
@@ -557,6 +648,8 @@ static int ar9170_usb_upload_firmware(struct ar9170_usb *aru)
 		return err;
 	}
 
+upload_fw_start:
+
 	/* Then, upload the firmware itself and start it */
 	return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size,
 				0x200000, true);
@@ -592,10 +685,8 @@ static void ar9170_usb_stop(struct ar9170 *ar)
 	if (IS_ACCEPTING_CMD(ar))
 		aru->common.state = AR9170_STOPPED;
 
-	/* lets wait a while until the tx - queues are dried out */
-	ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
-					    msecs_to_jiffies(1000));
-	if (ret == 0)
+	ret = ar9170_usb_flush(ar);
+	if (ret)
 		dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
 
 	usb_poison_anchored_urbs(&aru->tx_submitted);
@@ -656,6 +747,15 @@ err_out:
 	return err;
 }
 
+static bool ar9170_requires_one_stage(const struct usb_device_id *id)
+{
+	if (!id->driver_info)
+		return false;
+	if (id->driver_info == AR9170_REQ_FW1_ONLY)
+		return true;
+	return false;
+}
+
 static int ar9170_usb_probe(struct usb_interface *intf,
 			const struct usb_device_id *id)
 {
@@ -676,19 +776,30 @@ static int ar9170_usb_probe(struct usb_interface *intf,
 	aru->intf = intf;
 	ar = &aru->common;
 
+	aru->req_one_stage_fw = ar9170_requires_one_stage(id);
+
 	usb_set_intfdata(intf, aru);
 	SET_IEEE80211_DEV(ar->hw, &udev->dev);
 
 	init_usb_anchor(&aru->rx_submitted);
+	init_usb_anchor(&aru->tx_pending);
 	init_usb_anchor(&aru->tx_submitted);
 	init_completion(&aru->cmd_wait);
+	spin_lock_init(&aru->tx_urb_lock);
+
+	aru->tx_pending_urbs = 0;
+	aru->tx_submitted_urbs = 0;
 
 	aru->common.stop = ar9170_usb_stop;
+	aru->common.flush = ar9170_usb_flush;
 	aru->common.open = ar9170_usb_open;
 	aru->common.tx = ar9170_usb_tx;
 	aru->common.exec_cmd = ar9170_usb_exec_cmd;
 	aru->common.callback_cmd = ar9170_usb_callback_cmd;
 
+#ifdef CONFIG_PM
+	udev->reset_resume = 1;
+#endif /* CONFIG_PM */
 	err = ar9170_usb_reset(aru);
 	if (err)
 		goto err_freehw;
@@ -773,11 +884,6 @@ static int ar9170_resume(struct usb_interface *intf)
 	usb_unpoison_anchored_urbs(&aru->rx_submitted);
 	usb_unpoison_anchored_urbs(&aru->tx_submitted);
 
-	/*
-	 * FIXME: firmware upload will fail on resume.
-	 * but this is better than a hang!
-	 */
-
 	err = ar9170_usb_init_device(aru);
 	if (err)
 		goto err_unrx;
@@ -805,6 +911,7 @@ static struct usb_driver ar9170_driver = {
 #ifdef CONFIG_PM
 	.suspend = ar9170_suspend,
 	.resume = ar9170_resume,
+	.reset_resume = ar9170_resume,
 #endif /* CONFIG_PM */
 };
 
diff --git a/drivers/net/wireless/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h
index f5852924cd6..d098f4d5d2f 100644
--- a/drivers/net/wireless/ar9170/usb.h
+++ b/drivers/net/wireless/ath/ar9170/usb.h
@@ -43,7 +43,7 @@
 #include <linux/completion.h>
 #include <linux/spinlock.h>
 #include <linux/leds.h>
-#include <net/wireless.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include <linux/firmware.h>
 #include "eeprom.h"
@@ -51,6 +51,7 @@
 #include "ar9170.h"
 
 #define AR9170_NUM_RX_URBS			16
+#define AR9170_NUM_TX_URBS			8
 
 struct firmware;
 
@@ -60,9 +61,15 @@ struct ar9170_usb {
 	struct usb_interface *intf;
 
 	struct usb_anchor rx_submitted;
+	struct usb_anchor tx_pending;
 	struct usb_anchor tx_submitted;
 
-	spinlock_t cmdlock;
+	bool req_one_stage_fw;
+
+	spinlock_t tx_urb_lock;
+	unsigned int tx_submitted_urbs;
+	unsigned int tx_pending_urbs;
+
 	struct completion cmd_wait;
 	int readlen;
 	u8 *readbuf;
diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 75383a5df99..509b6f94f73 100644
--- a/drivers/net/wireless/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,6 +1,7 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index 84a74c5248e..090dc6d268a 100644
--- a/drivers/net/wireless/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -11,5 +11,6 @@ ath5k-y				+= reset.o
 ath5k-y				+= attach.o
 ath5k-y				+= base.o
 ath5k-y				+= led.o
+ath5k-y				+= rfkill.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 0b616e72fe0..6358233bac9 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -27,6 +27,8 @@
 #include <linux/types.h>
 #include <net/mac80211.h>
 
+#include "../regd.h"
+
 /* RX/TX descriptor hw structs
  * TODO: Driver part should only see sw structs */
 #include "desc.h"
@@ -207,7 +209,6 @@
 #define AR5K_TUNE_MAX_TXPOWER			63
 #define AR5K_TUNE_DEFAULT_TXPOWER		25
 #define AR5K_TUNE_TPC_TXPOWER			false
-#define AR5K_TUNE_ANT_DIVERSITY			true
 #define AR5K_TUNE_HWTXTRIES			4
 
 #define AR5K_INIT_CARR_SENSE_EN			1
@@ -418,6 +419,17 @@ enum ath5k_driver_mode {
 	AR5K_MODE_MAX		=	5
 };
 
+enum ath5k_ant_mode {
+	AR5K_ANTMODE_DEFAULT	= 0,	/* default antenna setup */
+	AR5K_ANTMODE_FIXED_A	= 1,	/* only antenna A is present */
+	AR5K_ANTMODE_FIXED_B	= 2,	/* only antenna B is present */
+	AR5K_ANTMODE_SINGLE_AP	= 3,	/* sta locked on a single ap */
+	AR5K_ANTMODE_SECTOR_AP	= 4,	/* AP with tx antenna set on tx desc */
+	AR5K_ANTMODE_SECTOR_STA	= 5,	/* STA with tx antenna set on tx desc */
+	AR5K_ANTMODE_DEBUG	= 6,	/* Debug mode -A -> Rx, B-> Tx- */
+	AR5K_ANTMODE_MAX,
+};
+
 
 /****************\
   TX DEFINITIONS
@@ -1039,8 +1051,6 @@ struct ath5k_hw {
 	bool			ah_5ghz;
 	bool			ah_2ghz;
 
-#define ah_regdomain		ah_capabilities.cap_regdomain.reg_current
-#define ah_regdomain_hw		ah_capabilities.cap_regdomain.reg_hw
 #define ah_modes		ah_capabilities.cap_mode
 #define ah_ee_version		ah_capabilities.cap_eeprom.ee_version
 
@@ -1051,8 +1061,11 @@ struct ath5k_hw {
 	bool			ah_software_retry;
 	u32			ah_limit_tx_retries;
 
-	u32			ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
-	bool			ah_ant_diversity;
+	/* Antenna Control */
+	u32			ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+	u8			ah_ant_mode;
+	u8			ah_tx_ant;
+	u8			ah_def_ant;
 
 	u8			ah_sta_id[ETH_ALEN];
 
@@ -1065,6 +1078,7 @@ struct ath5k_hw {
 	u32			ah_gpio[AR5K_MAX_GPIO];
 	int			ah_gpio_npins;
 
+	struct ath_regulatory	ah_regulatory;
 	struct ath5k_capabilities ah_capabilities;
 
 	struct ath5k_txq_info	ah_txq[AR5K_NUM_TX_QUEUES];
@@ -1099,11 +1113,12 @@ struct ath5k_hw {
 		/* Values in 0.25dB units */
 		s16		txp_min_pwr;
 		s16		txp_max_pwr;
+		/* Values in 0.5dB units */
 		s16		txp_offset;
 		s16		txp_ofdm;
-		/* Values in dB units */
-		s16		txp_cck_ofdm_pwr_delta;
 		s16		txp_cck_ofdm_gainf_delta;
+		/* Value in dB units */
+		s16		txp_cck_ofdm_pwr_delta;
 	} ah_txpower;
 
 	struct {
@@ -1241,6 +1256,10 @@ extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
 
+/* rfkill Functions */
+extern void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
+extern void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
+
 /* Misc functions */
 int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
@@ -1263,14 +1282,21 @@ extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *chann
 /* PHY calibration */
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel);
+void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel);
 /* Misc PHY functions */
 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
-extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
-extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Antenna control */
+extern void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant);
+extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
 /* TX power setup */
 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
-extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
 
 /*
  * Functions used internaly
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 70d376c63aa..c41ef58393e 100644
--- a/drivers/net/wireless/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -133,7 +133,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	ah->ah_cw_min = AR5K_TUNE_CWMIN;
 	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
 	ah->ah_software_retry = false;
-	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
 
 	/*
 	 * Set the mac version based on the pci id
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 32df27a9c7a..55f7de09d13 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -61,9 +61,13 @@
 
 static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
 static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
+static int modparam_all_channels;
+module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
+MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+
 
 /******************\
 * Internal defines *
@@ -223,9 +227,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 static void ath5k_remove_interface(struct ieee80211_hw *hw,
 		struct ieee80211_if_init_conf *conf);
 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
-static int ath5k_config_interface(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif,
-		struct ieee80211_if_conf *conf);
 static void ath5k_configure_filter(struct ieee80211_hw *hw,
 		unsigned int changed_flags,
 		unsigned int *new_flags,
@@ -241,8 +242,8 @@ static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
 static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
 static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
-static int ath5k_beacon_update(struct ath5k_softc *sc,
-		struct sk_buff *skb);
+static int ath5k_beacon_update(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif);
 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 		struct ieee80211_vif *vif,
 		struct ieee80211_bss_conf *bss_conf,
@@ -255,7 +256,6 @@ static const struct ieee80211_ops ath5k_hw_ops = {
 	.add_interface 	= ath5k_add_interface,
 	.remove_interface = ath5k_remove_interface,
 	.config 	= ath5k_config,
-	.config_interface = ath5k_config_interface,
 	.configure_filter = ath5k_configure_filter,
 	.set_key 	= ath5k_set_key,
 	.get_stats 	= ath5k_get_stats,
@@ -516,6 +516,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 		    IEEE80211_HW_NOISE_DBM;
 
 	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
@@ -705,6 +706,15 @@ err_no_irq:
 * Driver Initialization *
 \***********************/
 
+static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath5k_softc *sc = hw->priv;
+	struct ath_regulatory *reg = &sc->ah->ah_regulatory;
+
+	return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
 static int
 ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 {
@@ -793,12 +803,23 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	memset(sc->bssidmask, 0xff, ETH_ALEN);
 	ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
 
+	ah->ah_regulatory.current_rd =
+		ah->ah_capabilities.cap_eeprom.ee_regdomain;
+	ret = ath_regd_init(&ah->ah_regulatory, hw->wiphy, ath5k_reg_notifier);
+	if (ret) {
+		ATH5K_ERR(sc, "can't initialize regulatory system\n");
+		goto err_queues;
+	}
+
 	ret = ieee80211_register_hw(hw);
 	if (ret) {
 		ATH5K_ERR(sc, "can't register ieee80211 hw\n");
 		goto err_queues;
 	}
 
+	if (!ath_is_world_regd(&sc->ah->ah_regulatory))
+		regulatory_hint(hw->wiphy, sc->ah->ah_regulatory.alpha2);
+
 	ath5k_init_leds(sc);
 
 	return 0;
@@ -862,6 +883,20 @@ ath5k_ieee2mhz(short chan)
 		return 2212 + chan * 20;
 }
 
+/*
+ * Returns true for the channel numbers used without all_channels modparam.
+ */
+static bool ath5k_is_standard_channel(short chan)
+{
+	return ((chan <= 14) ||
+		/* UNII 1,2 */
+		((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
+		/* midband */
+		((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
+		/* UNII-3 */
+		((chan & 3) == 1 && chan >= 149 && chan <= 165));
+}
+
 static unsigned int
 ath5k_copy_channels(struct ath5k_hw *ah,
 		struct ieee80211_channel *channels,
@@ -899,6 +934,9 @@ ath5k_copy_channels(struct ath5k_hw *ah,
 		if (!ath5k_channel_ok(ah, freq, chfreq))
 			continue;
 
+		if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
+			continue;
+
 		/* Write channel info and increment counter */
 		channels[count].center_freq = freq;
 		channels[count].band = (chfreq == CHANNEL_2GHZ) ?
@@ -1238,7 +1276,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 		ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
 		(sc->power_level * 2),
 		hw_rate,
-		info->control.rates[0].count, keyidx, 0, flags,
+		info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
 		cts_rate, duration);
 	if (ret)
 		goto err_unmap;
@@ -1574,9 +1612,8 @@ ath5k_rx_start(struct ath5k_softc *sc)
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
 		sc->cachelsz, sc->rxbufsize);
 
-	sc->rxlink = NULL;
-
 	spin_lock_bh(&sc->rxbuflock);
+	sc->rxlink = NULL;
 	list_for_each_entry(bf, &sc->rxbuf, list) {
 		ret = ath5k_rxbuf_setup(sc, bf);
 		if (ret != 0) {
@@ -1585,9 +1622,9 @@ ath5k_rx_start(struct ath5k_softc *sc)
 		}
 	}
 	bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
+	ath5k_hw_set_rxdp(ah, bf->daddr);
 	spin_unlock_bh(&sc->rxbuflock);
 
-	ath5k_hw_set_rxdp(ah, bf->daddr);
 	ath5k_hw_start_rx_dma(ah);	/* enable recv descriptors */
 	ath5k_mode_setup(sc);		/* set filters, etc. */
 	ath5k_hw_start_rx_pcu(ah);	/* re-enable PCU/DMA engine */
@@ -1699,35 +1736,6 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
 	}
 }
 
-static void ath5k_tasklet_beacon(unsigned long data)
-{
-	struct ath5k_softc *sc = (struct ath5k_softc *) data;
-
-	/*
-	 * Software beacon alert--time to send a beacon.
-	 *
-	 * In IBSS mode we use this interrupt just to
-	 * keep track of the next TBTT (target beacon
-	 * transmission time) in order to detect wether
-	 * automatic TSF updates happened.
-	 */
-	if (sc->opmode == NL80211_IFTYPE_ADHOC) {
-		/* XXX: only if VEOL suppported */
-		u64 tsf = ath5k_hw_get_tsf64(sc->ah);
-		sc->nexttbtt += sc->bintval;
-		ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
-				"SWBA nexttbtt: %x hw_tu: %x "
-				"TSF: %llx\n",
-				sc->nexttbtt,
-				TSF_TO_TU(tsf),
-				(unsigned long long) tsf);
-	} else {
-		spin_lock(&sc->block);
-		ath5k_beacon_send(sc);
-		spin_unlock(&sc->block);
-	}
-}
-
 static void
 ath5k_tasklet_rx(unsigned long data)
 {
@@ -1736,7 +1744,7 @@ ath5k_tasklet_rx(unsigned long data)
 	struct sk_buff *skb, *next_skb;
 	dma_addr_t next_skb_addr;
 	struct ath5k_softc *sc = (void *)data;
-	struct ath5k_buf *bf, *bf_last;
+	struct ath5k_buf *bf;
 	struct ath5k_desc *ds;
 	int ret;
 	int hdrlen;
@@ -1747,7 +1755,6 @@ ath5k_tasklet_rx(unsigned long data)
 		ATH5K_WARN(sc, "empty rx buf pool\n");
 		goto unlock;
 	}
-	bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
 	do {
 		rxs.flag = 0;
 
@@ -1756,24 +1763,9 @@ ath5k_tasklet_rx(unsigned long data)
 		skb = bf->skb;
 		ds = bf->desc;
 
-		/*
-		 * last buffer must not be freed to ensure proper hardware
-		 * function. When the hardware finishes also a packet next to
-		 * it, we are sure, it doesn't use it anymore and we can go on.
-		 */
-		if (bf_last == bf)
-			bf->flags |= 1;
-		if (bf->flags) {
-			struct ath5k_buf *bf_next = list_entry(bf->list.next,
-					struct ath5k_buf, list);
-			ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
-					&rs);
-			if (ret)
-				break;
-			bf->flags &= ~1;
-			/* skip the overwritten one (even status is martian) */
-			goto next;
-		}
+		/* bail if HW is still using self-linked descriptor */
+		if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr)
+			break;
 
 		ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
 		if (unlikely(ret == -EINPROGRESS))
@@ -2014,7 +2006,8 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	struct	ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath5k_hw *ah = sc->ah;
 	struct ath5k_desc *ds;
-	int ret, antenna = 0;
+	int ret = 0;
+	u8 antenna;
 	u32 flags;
 
 	bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
@@ -2028,23 +2021,35 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	}
 
 	ds = bf->desc;
+	antenna = ah->ah_tx_ant;
 
 	flags = AR5K_TXDESC_NOACK;
 	if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
 		ds->ds_link = bf->daddr;	/* self-linked */
 		flags |= AR5K_TXDESC_VEOL;
-		/*
-		 * Let hardware handle antenna switching if txantenna is not set
-		 */
-	} else {
+	} else
 		ds->ds_link = 0;
-		/*
-		 * Switch antenna every 4 beacons if txantenna is not set
-		 * XXX assumes two antennas
-		 */
-		if (antenna == 0)
-			antenna = sc->bsent & 4 ? 2 : 1;
-	}
+
+	/*
+	 * If we use multiple antennas on AP and use
+	 * the Sectored AP scenario, switch antenna every
+	 * 4 beacons to make sure everybody hears our AP.
+	 * When a client tries to associate, hw will keep
+	 * track of the tx antenna to be used for this client
+	 * automaticaly, based on ACKed packets.
+	 *
+	 * Note: AP still listens and transmits RTS on the
+	 * default antenna which is supposed to be an omni.
+	 *
+	 * Note2: On sectored scenarios it's possible to have
+	 * multiple antennas (1omni -the default- and 14 sectors)
+	 * so if we choose to actually support this mode we need
+	 * to allow user to set how many antennas we have and tweak
+	 * the code below to send beacons on all of them.
+	 */
+	if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
+		antenna = sc->bsent & 4 ? 2 : 1;
+
 
 	/* FIXME: If we are in g mode and rate is a CCK rate
 	 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
@@ -2065,6 +2070,13 @@ err_unmap:
 	return ret;
 }
 
+static void ath5k_beacon_disable(struct ath5k_softc *sc)
+{
+	sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
+	ath5k_hw_set_imr(sc->ah, sc->imask);
+	ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
+}
+
 /*
  * Transmit a beacon frame at SWBA.  Dynamic updates to the
  * frame contents are done as needed and the slot time is
@@ -2097,7 +2109,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		sc->bmisscount++;
 		ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
 			"missed %u consecutive beacons\n", sc->bmisscount);
-		if (sc->bmisscount > 3) {		/* NB: 3 is a guess */
+		if (sc->bmisscount > 10) {	/* NB: 10 is a guess */
 			ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
 				"stuck beacon time (%u missed)\n",
 				sc->bmisscount);
@@ -2118,10 +2130,14 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 	 * are still pending on the queue.
 	 */
 	if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
-		ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
+		ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
 		/* NB: hw still stops DMA, so proceed */
 	}
 
+	/* refresh the beacon for AP mode */
+	if (sc->opmode == NL80211_IFTYPE_AP)
+		ath5k_beacon_update(sc->hw, sc->vif);
+
 	ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
 	ath5k_hw_start_tx_dma(ah, sc->bhalq);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
@@ -2278,6 +2294,35 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 	ath5k_hw_set_imr(ah, sc->imask);
 }
 
+static void ath5k_tasklet_beacon(unsigned long data)
+{
+	struct ath5k_softc *sc = (struct ath5k_softc *) data;
+
+	/*
+	 * Software beacon alert--time to send a beacon.
+	 *
+	 * In IBSS mode we use this interrupt just to
+	 * keep track of the next TBTT (target beacon
+	 * transmission time) in order to detect wether
+	 * automatic TSF updates happened.
+	 */
+	if (sc->opmode == NL80211_IFTYPE_ADHOC) {
+		/* XXX: only if VEOL suppported */
+		u64 tsf = ath5k_hw_get_tsf64(sc->ah);
+		sc->nexttbtt += sc->bintval;
+		ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+				"SWBA nexttbtt: %x hw_tu: %x "
+				"TSF: %llx\n",
+				sc->nexttbtt,
+				TSF_TO_TU(tsf),
+				(unsigned long long) tsf);
+	} else {
+		spin_lock(&sc->block);
+		ath5k_beacon_send(sc);
+		spin_unlock(&sc->block);
+	}
+}
+
 
 /********************\
 * Interrupt handling *
@@ -2315,6 +2360,8 @@ ath5k_init(struct ath5k_softc *sc)
 	if (ret)
 		goto done;
 
+	ath5k_rfkill_hw_start(ah);
+
 	/*
 	 * Reset the key cache since some parts do not reset the
 	 * contents on initial power up or resume from suspend.
@@ -2423,6 +2470,8 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 	tasklet_kill(&sc->restq);
 	tasklet_kill(&sc->beacontq);
 
+	ath5k_rfkill_hw_stop(sc->ah);
+
 	return ret;
 }
 
@@ -2452,7 +2501,7 @@ ath5k_intr(int irq, void *dev_id)
 			tasklet_schedule(&sc->restq);
 		} else {
 			if (status & AR5K_INT_SWBA) {
-				tasklet_schedule(&sc->beacontq);
+				tasklet_hi_schedule(&sc->beacontq);
 			}
 			if (status & AR5K_INT_RXEOL) {
 				/*
@@ -2481,8 +2530,11 @@ ath5k_intr(int irq, void *dev_id)
 				 */
 				ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
 			}
+			if (status & AR5K_INT_GPIO)
+				tasklet_schedule(&sc->rf_kill.toggleq);
+
 		}
-	} while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
+	} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
 
 	if (unlikely(!counter))
 		ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
@@ -2719,6 +2771,7 @@ ath5k_remove_interface(struct ieee80211_hw *hw,
 		goto end;
 
 	ath5k_hw_set_lladdr(sc->ah, mac);
+	ath5k_beacon_disable(sc);
 	sc->vif = NULL;
 end:
 	mutex_unlock(&sc->lock);
@@ -2731,53 +2784,43 @@ static int
 ath5k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
 	struct ieee80211_conf *conf = &hw->conf;
-	int ret;
+	int ret = 0;
 
 	mutex_lock(&sc->lock);
 
-	sc->bintval = conf->beacon_int;
-	sc->power_level = conf->power_level;
-
 	ret = ath5k_chan_set(sc, conf->channel);
+	if (ret < 0)
+		goto unlock;
 
-	mutex_unlock(&sc->lock);
-	return ret;
-}
-
-static int
-ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			struct ieee80211_if_conf *conf)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	int ret = 0;
+	if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+	(sc->power_level != conf->power_level)) {
+		sc->power_level = conf->power_level;
 
-	mutex_lock(&sc->lock);
-	if (sc->vif != vif) {
-		ret = -EIO;
-		goto unlock;
-	}
-	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
-		/* Cache for later use during resets */
-		memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
-		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
-		 * a clean way of letting us retrieve this yet. */
-		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-		mmiowb();
-	}
-	if (conf->changed & IEEE80211_IFCC_BEACON &&
-			(vif->type == NL80211_IFTYPE_ADHOC ||
-			 vif->type == NL80211_IFTYPE_MESH_POINT ||
-			 vif->type == NL80211_IFTYPE_AP)) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon) {
-			ret = -ENOMEM;
-			goto unlock;
-		}
-		ath5k_beacon_update(sc, beacon);
+		/* Half dB steps */
+		ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
 	}
 
+	/* TODO:
+	 * 1) Move this on config_interface and handle each case
+	 * separately eg. when we have only one STA vif, use
+	 * AR5K_ANTMODE_SINGLE_AP
+	 *
+	 * 2) Allow the user to change antenna mode eg. when only
+	 * one antenna is present
+	 *
+	 * 3) Allow the user to set default/tx antenna when possible
+	 *
+	 * 4) Default mode should handle 90% of the cases, together
+	 * with fixed a/b and single AP modes we should be able to
+	 * handle 99%. Sectored modes are extreme cases and i still
+	 * haven't found a usage for them. If we decide to support them,
+	 * then we must allow the user to set how many tx antennas we
+	 * have available
+	 */
+	ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
+
 unlock:
 	mutex_unlock(&sc->lock);
 	return ret;
@@ -3020,28 +3063,62 @@ ath5k_reset_tsf(struct ieee80211_hw *hw)
 		ath5k_hw_reset_tsf(sc->ah);
 }
 
+/*
+ * Updates the beacon that is sent by ath5k_beacon_send.  For adhoc,
+ * this is called only once at config_bss time, for AP we do it every
+ * SWBA interrupt so that the TIM will reflect buffered frames.
+ *
+ * Called with the beacon lock.
+ */
 static int
-ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb)
+ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	unsigned long flags;
 	int ret;
+	struct ath5k_softc *sc = hw->priv;
+	struct sk_buff *skb;
+
+	if (WARN_ON(!vif)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	skb = ieee80211_beacon_get(hw, vif);
+
+	if (!skb) {
+		ret = -ENOMEM;
+		goto out;
+	}
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-	spin_lock_irqsave(&sc->block, flags);
 	ath5k_txbuf_free(sc, sc->bbuf);
 	sc->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(sc, sc->bbuf);
 	if (ret)
 		sc->bbuf->skb = NULL;
+out:
+	return ret;
+}
+
+/*
+ *  Update the beacon and reconfigure the beacon queues.
+ */
+static void
+ath5k_beacon_reconfig(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	int ret;
+	unsigned long flags;
+	struct ath5k_softc *sc = hw->priv;
+
+	spin_lock_irqsave(&sc->block, flags);
+	ret = ath5k_beacon_update(hw, vif);
 	spin_unlock_irqrestore(&sc->block, flags);
-	if (!ret) {
+	if (ret == 0) {
 		ath5k_beacon_config(sc);
 		mmiowb();
 	}
-
-	return ret;
 }
+
 static void
 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
 {
@@ -3063,11 +3140,37 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 				    u32 changes)
 {
 	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+
+	mutex_lock(&sc->lock);
+	if (WARN_ON(sc->vif != vif))
+		goto unlock;
+
+	if (changes & BSS_CHANGED_BSSID) {
+		/* Cache for later use during resets */
+		memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN);
+		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
+		 * a clean way of letting us retrieve this yet. */
+		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		mmiowb();
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		sc->bintval = bss_conf->beacon_int;
+
 	if (changes & BSS_CHANGED_ASSOC) {
-		mutex_lock(&sc->lock);
 		sc->assoc = bss_conf->assoc;
 		if (sc->opmode == NL80211_IFTYPE_STATION)
 			set_beacon_filter(hw, sc->assoc);
-		mutex_unlock(&sc->lock);
 	}
+
+	if (changes & BSS_CHANGED_BEACON &&
+	    (vif->type == NL80211_IFTYPE_ADHOC ||
+	     vif->type == NL80211_IFTYPE_MESH_POINT ||
+	     vif->type == NL80211_IFTYPE_AP)) {
+		ath5k_beacon_reconfig(hw, vif);
+	}
+
+ unlock:
+	mutex_unlock(&sc->lock);
 }
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 822956114cd..f9b7f2f819b 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -46,6 +46,7 @@
 #include <linux/wireless.h>
 #include <linux/if_ether.h>
 #include <linux/leds.h>
+#include <linux/rfkill.h>
 
 #include "ath5k.h"
 #include "debug.h"
@@ -56,7 +57,6 @@
 
 struct ath5k_buf {
 	struct list_head	list;
-	unsigned int		flags;	/* rx descriptor flags */
 	struct ath5k_desc	*desc;	/* virtual addr of desc */
 	dma_addr_t		daddr;	/* physical addr of desc */
 	struct sk_buff		*skb;	/* skbuff for buf */
@@ -92,6 +92,15 @@ struct ath5k_led
 	struct led_classdev led_dev;		/* led classdev */
 };
 
+/* Rfkill */
+struct ath5k_rfkill {
+	/* GPIO PIN for rfkill */
+	u16 gpio;
+	/* polarity of rfkill GPIO PIN */
+	bool polarity;
+	/* RFKILL toggle tasklet */
+	struct tasklet_struct toggleq;
+};
 
 #if CHAN_DEBUG
 #define ATH_CHAN_MAX	(26+26+26+200+200)
@@ -168,6 +177,8 @@ struct ath5k_softc {
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
 	struct ath5k_led	tx_led;		/* tx led */
 
+	struct ath5k_rfkill	rf_kill;
+
 	spinlock_t		block;		/* protects beacon */
 	struct tasklet_struct	beacontq;	/* beacon intr tasklet */
 	struct ath5k_buf	*bbuf;		/* beacon buffer */
diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
index 367a6c7d3cc..367a6c7d3cc 100644
--- a/drivers/net/wireless/ath5k/caps.c
+++ b/drivers/net/wireless/ath/ath5k/caps.c
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index 4904a07e4b5..4904a07e4b5 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index 66f69f04e55..66f69f04e55 100644
--- a/drivers/net/wireless/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index dc30a2b70a6..dc30a2b70a6 100644
--- a/drivers/net/wireless/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
diff --git a/drivers/net/wireless/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
index 56158c804e3..56158c804e3 100644
--- a/drivers/net/wireless/ath5k/desc.h
+++ b/drivers/net/wireless/ath/ath5k/desc.h
diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index b65b4feb2d2..941b51130a6 100644
--- a/drivers/net/wireless/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -80,8 +80,6 @@ int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
  * ath5k_hw_get_rxdp - Get RX Descriptor's address
  *
  * @ah: The &struct ath5k_hw
- *
- * XXX: Is RXDP read and clear ?
  */
 u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
 {
diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index c0fb3b09ba4..c56b494d417 100644
--- a/drivers/net/wireless/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -156,6 +156,17 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
 	}
 
+	AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val);
+
+	if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val)
+		ee->ee_is_hb63 = true;
+	else
+		ee->ee_is_hb63 = false;
+
+	AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val);
+	ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL);
+	ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false;
+
 	return 0;
 }
 
@@ -197,16 +208,16 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
 	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
 	ee->ee_ant_control[mode][i++]	= val & 0x3f;
 
-	/* Get antenna modes */
-	ah->ah_antenna[mode][0] =
+	/* Get antenna switch tables */
+	ah->ah_ant_ctl[mode][AR5K_ANT_CTL] =
 	    (ee->ee_ant_control[mode][0] << 4);
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+	ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] =
 	     ee->ee_ant_control[mode][1] 	|
 	    (ee->ee_ant_control[mode][2] << 6) 	|
 	    (ee->ee_ant_control[mode][3] << 12) |
 	    (ee->ee_ant_control[mode][4] << 18) |
 	    (ee->ee_ant_control[mode][5] << 24);
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+	ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] =
 	     ee->ee_ant_control[mode][6] 	|
 	    (ee->ee_ant_control[mode][7] << 6) 	|
 	    (ee->ee_ant_control[mode][8] << 12) |
@@ -640,9 +651,9 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
 static inline void
 ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
 {
-	const static u16 intercepts3[] =
+	static const u16 intercepts3[] =
 		{ 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 };
-	const static u16 intercepts3_2[] =
+	static const u16 intercepts3_2[] =
 		{ 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 };
 	const u16 *ip;
 	int i;
@@ -1694,9 +1705,40 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
 	return 0;
 }
 
+static int
+ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 offset;
+	u16 val;
+	int ret = 0, i;
+
+	offset = AR5K_EEPROM_CTL(ee->ee_version) +
+				AR5K_EEPROM_N_CTLS(ee->ee_version);
+
+	if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) {
+		/* No spur info for 5GHz */
+		ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR;
+		/* 2 channels for 2GHz (2464/2420) */
+		ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1;
+		ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2;
+		ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR;
+	} else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) {
+		for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+			AR5K_EEPROM_READ(offset, val);
+			ee->ee_spur_chans[i][0] = val;
+			AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS,
+									val);
+			ee->ee_spur_chans[i][1] = val;
+			offset++;
+		}
+	}
+
+	return ret;
+}
 
 /*
- * Initialize eeprom power tables
+ * Initialize eeprom data structure
  */
 int
 ath5k_eeprom_init(struct ath5k_hw *ah)
@@ -1719,6 +1761,10 @@ ath5k_eeprom_init(struct ath5k_hw *ah)
 	if (err < 0)
 		return err;
 
+	err = ath5k_eeprom_read_spur_chans(ah);
+	if (err < 0)
+		return err;
+
 	return 0;
 }
 
@@ -1754,16 +1800,3 @@ int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
 
 	return 0;
 }
-
-bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah)
-{
-	u16 data;
-
-	ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data);
-
-	if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data)
-		return true;
-	else
-		return false;
-}
-
diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index b0c0606dea0..64be73a5eda 100644
--- a/drivers/net/wireless/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -26,6 +26,13 @@
 #define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
 
 #define	AR5K_EEPROM_IS_HB63		0x000b	/* Talon detect */
+
+#define AR5K_EEPROM_RFKILL		0x0f
+#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
+#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S	1
+
 #define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
 #define AR5K_EEPROM_CHECKSUM		0x00c0	/* EEPROM checksum */
 #define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
@@ -66,11 +73,6 @@
 #define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
 #define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz */
 
-#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
-#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S	1
-
 /* Newer EEPROMs are using a different offset */
 #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
 	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
@@ -211,6 +213,23 @@
 #define AR5K_EEPROM_I_GAIN		10
 #define AR5K_EEPROM_CCK_OFDM_DELTA	15
 #define AR5K_EEPROM_N_IQ_CAL		2
+/* 5GHz/2GHz */
+enum ath5k_eeprom_freq_bands{
+	AR5K_EEPROM_BAND_5GHZ = 0,
+	AR5K_EEPROM_BAND_2GHZ = 1,
+	AR5K_EEPROM_N_FREQ_BANDS,
+};
+/* Spur chans per freq band */
+#define	AR5K_EEPROM_N_SPUR_CHANS	5
+/* fbin value for chan 2464 x2 */
+#define	AR5K_EEPROM_5413_SPUR_CHAN_1	1640
+/* fbin value for chan 2420 x2 */
+#define	AR5K_EEPROM_5413_SPUR_CHAN_2	1200
+#define	AR5K_EEPROM_SPUR_CHAN_MASK	0x3FFF
+#define	AR5K_EEPROM_NO_SPUR		0x8000
+#define	AR5K_SPUR_CHAN_WIDTH			87
+#define	AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz	3125
+#define	AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz	6250
 
 #define AR5K_EEPROM_READ(_o, _v) do {			\
 	ret = ath5k_hw_eeprom_read(ah, (_o), &(_v));	\
@@ -221,11 +240,11 @@
 #define AR5K_EEPROM_READ_HDR(_o, _v)					\
 	AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);	\
 
-enum ath5k_ant_setting {
-	AR5K_ANT_VARIABLE	= 0,	/* variable by programming */
-	AR5K_ANT_FIXED_A	= 1,	/* fixed to 11a frequencies */
-	AR5K_ANT_FIXED_B	= 2,	/* fixed to 11b frequencies */
-	AR5K_ANT_MAX		= 3,
+enum ath5k_ant_table {
+	AR5K_ANT_CTL		= 0,	/* Idle switch table settings */
+	AR5K_ANT_SWTABLE_A	= 1,	/* Switch table for antenna A */
+	AR5K_ANT_SWTABLE_B	= 2,	/* Switch table for antenna B */
+	AR5K_ANT_MAX,
 };
 
 enum ath5k_ctl_mode {
@@ -369,6 +388,9 @@ struct ath5k_eeprom_info {
 	u16	ee_version;
 	u16	ee_header;
 	u16	ee_ant_gain;
+	u8	ee_rfkill_pin;
+	bool	ee_rfkill_pol;
+	bool	ee_is_hb63;
 	u16	ee_misc0;
 	u16	ee_misc1;
 	u16	ee_misc2;
@@ -436,6 +458,10 @@ struct ath5k_eeprom_info {
 	s8	ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES];
 	s8	ee_pd_gain_overlap;
 
+	/* Spur mitigation data (fbin values for spur channels) */
+	u16	ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS];
+
+	/* Antenna raw switch tables */
 	u32	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
 };
 
diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c
index 64a27e73d02..64a27e73d02 100644
--- a/drivers/net/wireless/ath5k/gpio.c
+++ b/drivers/net/wireless/ath/ath5k/gpio.c
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 61fb621ed20..18eb5190ce4 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -537,8 +537,6 @@ static const struct ath5k_ini ar5212_ini_common_start[] = {
 	{ AR5K_DCU_TX_FILTER_1(15), 0x00000000 },
 	{ AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
 	{ AR5K_DCU_TX_FILTER_SET, 0x00000000 },
-	{ AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
-	{ AR5K_DCU_TX_FILTER_SET, 0x00000000 },
 	{ AR5K_STA_ID1,		0x00000000 },
 	{ AR5K_BSS_ID0,		0x00000000 },
 	{ AR5K_BSS_ID1,		0x00000000 },
@@ -669,7 +667,7 @@ static const struct ath5k_ini ar5212_ini_common_start[] = {
 	/*{ AR5K_PHY(650), 0x000001b5 },*/
 	{ AR5K_PHY(651),	0x00000000 },
 	{ AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
-	{ AR5K_PHY_TXPOWER_RATE2, 0x20202020 },
+	{ AR5K_PHY_TXPOWER_RATE4, 0x20202020 },
 	/*{ AR5K_PHY(655), 0x13c889af },*/
 	{ AR5K_PHY(656),	0x38490a20 },
 	{ AR5K_PHY(657),	0x00007bb6 },
@@ -718,7 +716,7 @@ static const struct ath5k_ini_mode ar5212_ini_mode_start[] = {
 	{ AR5K_PHY_SETTLING,
 	   { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } },
 	{ AR5K_PHY_AGCCTL,
-	   { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d18 } },
+	   { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d10 } },
 	{ AR5K_PHY_NF,
 	   { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
 	{ AR5K_PHY_WEAK_OFDM_HIGH_THR,
@@ -799,7 +797,7 @@ static const struct ath5k_ini_mode rf5112_ini_mode_end[] = {
 	{ AR5K_PHY_DESIRED_SIZE,
 	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
 	{ AR5K_PHY_SIG,
-	   { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7ee80d2e } },
+	   { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7e800d2e } },
 	{ AR5K_PHY_AGCCOARSE,
 	   { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
diff --git a/drivers/net/wireless/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 19555fb79c9..876725f08b6 100644
--- a/drivers/net/wireless/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -53,8 +53,6 @@
 
 /* Devices we match on for LED config info (typically laptops) */
 static const struct pci_device_id ath5k_led_devices[] = {
-	/* IBM-specific AR5212 */
-	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
 	/* AR5211 */
 	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) },
 	/* HP Compaq nc6xx, nc4000, nx6000 */
@@ -67,6 +65,12 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
 	/* Acer Extensa 5620z (nekoreeve@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
+	/* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
+	/* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+	/* IBM-specific AR5212 (all others) */
+	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
 	{ }
 };
 
@@ -78,7 +82,7 @@ void ath5k_led_enable(struct ath5k_softc *sc)
 	}
 }
 
-void ath5k_led_on(struct ath5k_softc *sc)
+static void ath5k_led_on(struct ath5k_softc *sc)
 {
 	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
 		return;
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 55122f1e198..ec35503f6a4 100644
--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -736,8 +736,8 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
 	/* When in AP mode zero timer0 to start TSF */
 	if (ah->ah_op_mode == NL80211_IFTYPE_AP)
 		ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
-	else
-		ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+
+	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
 	ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
 	ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
 	ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
@@ -1003,7 +1003,7 @@ int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
 	 * Note2: Windows driver (ndiswrapper) sets this to
 	 *        0x00000714 instead of 0x00000007
 	 */
-	if (ah->ah_version > AR5K_AR5211) {
+	if (ah->ah_version >= AR5K_AR5211) {
 		ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
 				AR5K_KEYTABLE_TYPE(entry));
 
@@ -1038,9 +1038,9 @@ int ath5k_keycache_type(const struct ieee80211_key_conf *key)
 	case ALG_CCMP:
 		return AR5K_KEYTABLE_TYPE_CCM;
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			return AR5K_KEYTABLE_TYPE_40;
-		else if (key->keylen == LEN_WEP104)
+		else if (key->keylen == WLAN_KEY_LEN_WEP104)
 			return AR5K_KEYTABLE_TYPE_104;
 		return -EINVAL;
 	default:
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index b48b29dca3d..a876ca8d69e 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
  * tx power and a Peak to Average Power Detector (PAPD) will try
  * to measure the gain.
  *
- * TODO: Use propper tx power setting for the probe packet so
- * that we don't observe a serious power drop on the receiver
- *
  * XXX:  How about forcing a tx packet (bypassing PCU arbitrator etc)
  * just after we enable the probe so that we don't mess with
  * standard traffic ? Maybe it's time to use sw interrupts and
@@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
 
 	/* Send the packet with 2dB below max power as
 	 * patent doc suggest */
-	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4,
 			AR5K_PHY_PAPD_PROBE_TXPOWER) |
 			AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
 
@@ -1356,6 +1353,257 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
 	return ret;
 }
 
+/***************************\
+* Spur mitigation functions *
+\***************************/
+
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	u8 refclk_freq;
+
+	if ((ah->ah_radio == AR5K_RF5112) ||
+	(ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+		refclk_freq = 40;
+	else
+		refclk_freq = 32;
+
+	if ((channel->center_freq % refclk_freq != 0) &&
+	((channel->center_freq % refclk_freq < 10) ||
+	(channel->center_freq % refclk_freq > 22)))
+		return true;
+	else
+		return false;
+}
+
+void
+ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 mag_mask[4] = {0, 0, 0, 0};
+	u32 pilot_mask[2] = {0, 0};
+	/* Note: fbin values are scaled up by 2 */
+	u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window;
+	s32 spur_delta_phase, spur_freq_sigma_delta;
+	s32 spur_offset, num_symbols_x16;
+	u8 num_symbol_offsets, i, freq_band;
+
+	/* Convert current frequency to fbin value (the same way channels
+	 * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale
+	 * up by 2 so we can compare it later */
+	if (channel->hw_value & CHANNEL_2GHZ) {
+		chan_fbin = (channel->center_freq - 2300) * 10;
+		freq_band = AR5K_EEPROM_BAND_2GHZ;
+	} else {
+		chan_fbin = (channel->center_freq - 4900) * 10;
+		freq_band = AR5K_EEPROM_BAND_5GHZ;
+	}
+
+	/* Check if any spur_chan_fbin from EEPROM is
+	 * within our current channel's spur detection range */
+	spur_chan_fbin = AR5K_EEPROM_NO_SPUR;
+	spur_detection_window = AR5K_SPUR_CHAN_WIDTH;
+	/* XXX: Half/Quarter channels ?*/
+	if (channel->hw_value & CHANNEL_TURBO)
+		spur_detection_window *= 2;
+
+	for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+		spur_chan_fbin = ee->ee_spur_chans[i][freq_band];
+
+		/* Note: mask cleans AR5K_EEPROM_NO_SPUR flag
+		 * so it's zero if we got nothing from EEPROM */
+		if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) {
+			spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+			break;
+		}
+
+		if ((chan_fbin - spur_detection_window <=
+		(spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) &&
+		(chan_fbin + spur_detection_window >=
+		(spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) {
+			spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+			break;
+		}
+	}
+
+	/* We need to enable spur filter for this channel */
+	if (spur_chan_fbin) {
+		spur_offset = spur_chan_fbin - chan_fbin;
+		/*
+		 * Calculate deltas:
+		 * spur_freq_sigma_delta -> spur_offset / sample_freq << 21
+		 * spur_delta_phase -> spur_offset / chip_freq << 11
+		 * Note: Both values have 100KHz resolution
+		 */
+		/* XXX: Half/Quarter rate channels ? */
+		switch (channel->hw_value) {
+		case CHANNEL_A:
+			/* Both sample_freq and chip_freq are 40MHz */
+			spur_delta_phase = (spur_offset << 17) / 25;
+			spur_freq_sigma_delta = (spur_delta_phase >> 10);
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+			break;
+		case CHANNEL_G:
+			/* sample_freq -> 40MHz chip_freq -> 44MHz
+			 * (for b compatibility) */
+			spur_freq_sigma_delta = (spur_offset << 8) / 55;
+			spur_delta_phase = (spur_offset << 17) / 25;
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+			break;
+		case CHANNEL_T:
+		case CHANNEL_TG:
+			/* Both sample_freq and chip_freq are 80MHz */
+			spur_delta_phase = (spur_offset << 16) / 25;
+			spur_freq_sigma_delta = (spur_delta_phase >> 10);
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz;
+			break;
+		default:
+			return;
+		}
+
+		/* Calculate pilot and magnitude masks */
+
+		/* Scale up spur_offset by 1000 to switch to 100HZ resolution
+		 * and divide by symbol_width to find how many symbols we have
+		 * Note: number of symbols is scaled up by 16 */
+		num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width;
+
+		/* Spur is on a symbol if num_symbols_x16 % 16 is zero */
+		if (!(num_symbols_x16 & 0xF))
+			/* _X_ */
+			num_symbol_offsets = 3;
+		else
+			/* _xx_ */
+			num_symbol_offsets = 4;
+
+		for (i = 0; i < num_symbol_offsets; i++) {
+
+			/* Calculate pilot mask */
+			s32 curr_sym_off =
+				(num_symbols_x16 / 16) + i + 25;
+
+			/* Pilot magnitude mask seems to be a way to
+			 * declare the boundaries for our detection
+			 * window or something, it's 2 for the middle
+			 * value(s) where the symbol is expected to be
+			 * and 1 on the boundary values */
+			u8 plt_mag_map =
+				(i == 0 || i == (num_symbol_offsets - 1))
+								? 1 : 2;
+
+			if (curr_sym_off >= 0 && curr_sym_off <= 32) {
+				if (curr_sym_off <= 25)
+					pilot_mask[0] |= 1 << curr_sym_off;
+				else if (curr_sym_off >= 27)
+					pilot_mask[0] |= 1 << (curr_sym_off - 1);
+			} else if (curr_sym_off >= 33 && curr_sym_off <= 52)
+				pilot_mask[1] |= 1 << (curr_sym_off - 33);
+
+			/* Calculate magnitude mask (for viterbi decoder) */
+			if (curr_sym_off >= -1 && curr_sym_off <= 14)
+				mag_mask[0] |=
+					plt_mag_map << (curr_sym_off + 1) * 2;
+			else if (curr_sym_off >= 15 && curr_sym_off <= 30)
+				mag_mask[1] |=
+					plt_mag_map << (curr_sym_off - 15) * 2;
+			else if (curr_sym_off >= 31 && curr_sym_off <= 46)
+				mag_mask[2] |=
+					plt_mag_map << (curr_sym_off - 31) * 2;
+			else if (curr_sym_off >= 46 && curr_sym_off <= 53)
+				mag_mask[3] |=
+					plt_mag_map << (curr_sym_off - 47) * 2;
+
+		}
+
+		/* Write settings on hw to enable spur filter */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_RATE, 0xff);
+		/* XXX: Self correlator also ? */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+					AR5K_PHY_IQ_PILOT_MASK_EN |
+					AR5K_PHY_IQ_CHAN_MASK_EN |
+					AR5K_PHY_IQ_SPUR_FILT_EN);
+
+		/* Set delta phase and freq sigma delta */
+		ath5k_hw_reg_write(ah,
+				AR5K_REG_SM(spur_delta_phase,
+					AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) |
+				AR5K_REG_SM(spur_freq_sigma_delta,
+				AR5K_PHY_TIMING_11_SPUR_FREQ_SD) |
+				AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC,
+				AR5K_PHY_TIMING_11);
+
+		/* Write pilot masks */
+		ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+					AR5K_PHY_TIMING_8_PILOT_MASK_2,
+					pilot_mask[1]);
+
+		ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+					AR5K_PHY_TIMING_10_PILOT_MASK_2,
+					pilot_mask[1]);
+
+		/* Write magnitude masks */
+		ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1);
+		ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2);
+		ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_MASK_4,
+					mag_mask[3]);
+
+		ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1);
+		ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2);
+		ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+					AR5K_PHY_BIN_MASK2_4_MASK_4,
+					mag_mask[3]);
+
+	} else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) &
+	AR5K_PHY_IQ_SPUR_FILT_EN) {
+		/* Clean up spur mitigation settings and disable fliter */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_RATE, 0);
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ,
+					AR5K_PHY_IQ_PILOT_MASK_EN |
+					AR5K_PHY_IQ_CHAN_MASK_EN |
+					AR5K_PHY_IQ_SPUR_FILT_EN);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11);
+
+		/* Clear pilot masks */
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+					AR5K_PHY_TIMING_8_PILOT_MASK_2,
+					0);
+
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+					AR5K_PHY_TIMING_10_PILOT_MASK_2,
+					0);
+
+		/* Clear magnitude masks */
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_MASK_4,
+					0);
+
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+					AR5K_PHY_BIN_MASK2_4_MASK_4,
+					0);
+	}
+}
+
+/********************\
+  Misc PHY functions
+\********************/
+
 int ath5k_hw_phy_disable(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
@@ -1365,10 +1613,6 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
 	return 0;
 }
 
-/********************\
-  Misc PHY functions
-\********************/
-
 /*
  * Get the PHY Chip revision
  */
@@ -1417,25 +1661,189 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
 	return ret;
 }
 
+/*****************\
+* Antenna control *
+\*****************/
+
 void /*TODO:Boundary check*/
-ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant)
+ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	/*Just a try M.F.*/
+
 	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA);
+		ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA);
 }
 
 unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	/*Just a try M.F.*/
+
 	if (ah->ah_version != AR5K_AR5210)
-		return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+		return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA) & 0x7;
 
 	return false; /*XXX: What do we return for 5210 ?*/
 }
 
+/*
+ * Enable/disable fast rx antenna diversity
+ */
+static void
+ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
+{
+	switch (ee_mode) {
+	case AR5K_EEPROM_MODE_11G:
+		/* XXX: This is set to
+		 * disabled on initvals !!! */
+	case AR5K_EEPROM_MODE_11A:
+		if (enable)
+			AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+		else
+			AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+		break;
+	default:
+		return;
+	}
+
+	if (enable) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+				AR5K_PHY_RESTART_DIV_GC, 0xc);
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+					AR5K_PHY_FAST_ANT_DIV_EN);
+	} else {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+				AR5K_PHY_RESTART_DIV_GC, 0x8);
+
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+					AR5K_PHY_FAST_ANT_DIV_EN);
+	}
+}
+
+/*
+ * Set antenna operating mode
+ */
+void
+ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
+{
+	struct ieee80211_channel *channel = &ah->ah_current_channel;
+	bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div;
+	bool use_def_for_sg;
+	u8 def_ant, tx_ant, ee_mode;
+	u32 sta_id1 = 0;
+
+	def_ant = ah->ah_def_ant;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
+	default:
+		ATH5K_ERR(ah->ah_sc,
+			"invalid channel: %d\n", channel->center_freq);
+		return;
+	}
+
+	switch (ant_mode) {
+	case AR5K_ANTMODE_DEFAULT:
+		tx_ant = 0;
+		use_def_for_tx = false;
+		update_def_on_tx = false;
+		use_def_for_rts = false;
+		use_def_for_sg = false;
+		fast_div = true;
+		break;
+	case AR5K_ANTMODE_FIXED_A:
+		def_ant = 1;
+		tx_ant = 0;
+		use_def_for_tx = true;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = true;
+		fast_div = false;
+		break;
+	case AR5K_ANTMODE_FIXED_B:
+		def_ant = 2;
+		tx_ant = 0;
+		use_def_for_tx = true;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = true;
+		fast_div = false;
+		break;
+	case AR5K_ANTMODE_SINGLE_AP:
+		def_ant = 1;	/* updated on tx */
+		tx_ant = 0;
+		use_def_for_tx = true;
+		update_def_on_tx = true;
+		use_def_for_rts = true;
+		use_def_for_sg = true;
+		fast_div = true;
+		break;
+	case AR5K_ANTMODE_SECTOR_AP:
+		tx_ant = 1;	/* variable */
+		use_def_for_tx = false;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = false;
+		fast_div = false;
+		break;
+	case AR5K_ANTMODE_SECTOR_STA:
+		tx_ant = 1;	/* variable */
+		use_def_for_tx = true;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = false;
+		fast_div = true;
+		break;
+	case AR5K_ANTMODE_DEBUG:
+		def_ant = 1;
+		tx_ant = 2;
+		use_def_for_tx = false;
+		update_def_on_tx = false;
+		use_def_for_rts = false;
+		use_def_for_sg = false;
+		fast_div = false;
+		break;
+	default:
+		return;
+	}
+
+	ah->ah_tx_ant = tx_ant;
+	ah->ah_ant_mode = ant_mode;
+
+	sta_id1 |= use_def_for_tx ? AR5K_STA_ID1_DEFAULT_ANTENNA : 0;
+	sta_id1 |= update_def_on_tx ? AR5K_STA_ID1_DESC_ANTENNA : 0;
+	sta_id1 |= use_def_for_rts ? AR5K_STA_ID1_RTS_DEF_ANTENNA : 0;
+	sta_id1 |= use_def_for_sg ? AR5K_STA_ID1_SELFGEN_DEF_ANT : 0;
+
+	AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_ANTENNA_SETTINGS);
+
+	if (sta_id1)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1);
+
+	/* Note: set diversity before default antenna
+	 * because it won't work correctly */
+	ath5k_hw_set_fast_div(ah, ee_mode, fast_div);
+	ath5k_hw_set_def_antenna(ah, def_ant);
+}
+
 
 /****************\
 * TX power setup *
@@ -1489,6 +1897,9 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
 	s16 min_pwrL, min_pwrR;
 	s16 pwr_i;
 
+	if (WARN_ON(stepL[0] == stepL[1] || stepR[0] == stepR[1]))
+		return 0;
+
 	if (pwrL[0] == pwrL[1])
 		min_pwrL = pwrL[0];
 	else {
@@ -1750,8 +2161,6 @@ done:
  * Get the max edge power for this channel if
  * we have such data from EEPROM's Conformance Test
  * Limits (CTL), and limit max power if needed.
- *
- * FIXME: Only works for world regulatory domains
  */
 static void
 ath5k_get_max_ctl_power(struct ath5k_hw *ah,
@@ -1767,26 +2176,23 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
 	u8 ctl_idx = 0xFF;
 	u32 target = channel->center_freq;
 
-	/* Find out a CTL for our mode that's not mapped
-	 * on a specific reg domain.
-	 *
-	 * TODO: Map our current reg domain to one of the 3 available
-	 * reg domain ids so that we can support more CTLs. */
+	ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band);
+
 	switch (channel->hw_value & CHANNEL_MODES) {
 	case CHANNEL_A:
-		ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_11A;
 		break;
 	case CHANNEL_G:
-		ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_11G;
 		break;
 	case CHANNEL_B:
-		ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_11B;
 		break;
 	case CHANNEL_T:
-		ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_TURBO;
 		break;
 	case CHANNEL_TG:
-		ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_TURBOG;
 		break;
 	case CHANNEL_XR:
 		/* Fall through */
@@ -2482,8 +2888,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
 		for (i = 8; i <= 15; i++)
 			rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
 
-	ah->ah_txpower.txp_min_pwr = rates[7];
-	ah->ah_txpower.txp_max_pwr = rates[0];
+	/* Now that we have all rates setup use table offset to
+	 * match the power range set by user with the power indices
+	 * on PCDAC/PDADC table */
+	for (i = 0; i < 16; i++) {
+		rates[i] += ah->ah_txpower.txp_offset;
+		/* Don't get out of bounds */
+		if (rates[i] > 63)
+			rates[i] = 63;
+	}
+
+	/* Min/max in 0.25dB units */
+	ah->ah_txpower.txp_min_pwr = 2 * rates[7];
+	ah->ah_txpower.txp_max_pwr = 2 * rates[0];
 	ah->ah_txpower.txp_ofdm = rates[7];
 }
 
@@ -2591,16 +3008,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 	return 0;
 }
 
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
 {
 	/*Just a try M.F.*/
 	struct ieee80211_channel *channel = &ah->ah_current_channel;
+	u8 ee_mode;
 
 	ATH5K_TRACE(ah->ah_sc);
+
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
+	default:
+		ATH5K_ERR(ah->ah_sc,
+			"invalid channel: %d\n", channel->center_freq);
+		return -EINVAL;
+	}
+
 	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
 		"changing txpower to %d\n", txpower);
 
-	return ath5k_hw_txpower(ah, channel, mode, txpower);
+	return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
 }
 
 #undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 5094c394a4b..73407b3f53e 100644
--- a/drivers/net/wireless/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -160,7 +160,8 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
 	if (ah->ah_version == AR5K_AR5210)
 		return false;
 
-	pending = (AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT);
+	pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue));
+	pending &= AR5K_QCU_STS_FRMPENDCNT;
 
 	/* It's possible to have no frames pending even if TXE
 	 * is set. To indicate that q has not stopped return
@@ -401,14 +402,16 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
 				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
 				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+				AR5K_DCU_MISC_ARBLOCK_IGNORE |
 				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
 				AR5K_DCU_MISC_BCN_ENABLE);
 			break;
 
 		case AR5K_TX_QUEUE_CAB:
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
+				AR5K_QCU_MISC_FRSHED_BCN_SENT_GT |
 				AR5K_QCU_MISC_CBREXP_DIS |
+				AR5K_QCU_MISC_RDY_VEOL_POLICY |
 				AR5K_QCU_MISC_CBREXP_BCN_DIS);
 
 			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 7070d1543cd..6809b54a2ad 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1148,6 +1148,11 @@
 #define AR5K_STA_ID1_CBCIV_ENDIAN	0x40000000	/* ??? */
 #define AR5K_STA_ID1_KEYSRCH_MCAST	0x80000000	/* Do key cache search for mcast frames */
 
+#define	AR5K_STA_ID1_ANTENNA_SETTINGS	(AR5K_STA_ID1_DEFAULT_ANTENNA | \
+					AR5K_STA_ID1_DESC_ANTENNA | \
+					AR5K_STA_ID1_RTS_DEF_ANTENNA | \
+					AR5K_STA_ID1_SELFGEN_DEF_ANT)
+
 /*
  * First BSSID register (MAC address, lower 32bits)
  */
@@ -2028,7 +2033,9 @@
 #define	AR5K_PHY_AGCCTL			0x9860			/* Register address */
 #define	AR5K_PHY_AGCCTL_CAL		0x00000001	/* Enable PHY calibration */
 #define	AR5K_PHY_AGCCTL_NF		0x00000002	/* Enable Noise Floor calibration */
+#define	AR5K_PHY_AGCCTL_OFDM_DIV_DIS	0x00000008	/* Disable antenna diversity on OFDM modes */
 #define	AR5K_PHY_AGCCTL_NF_EN		0x00008000	/* Enable nf calibration to happen (?) */
+#define	AR5K_PHY_AGCTL_FLTR_CAL		0x00010000	/* Allow filter calibration (?) */
 #define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
@@ -2528,7 +2535,7 @@
  * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
  */
 #define AR5K_PHY_CCK_CROSSCORR			0xa208
-#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000003f
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
 /* Same address is used for antenna diversity activation */
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 5f72c111c2e..bd0a97a38d3 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -54,9 +54,8 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 	u32 coef_scaled, coef_exp, coef_man,
 		ds_coef_exp, ds_coef_man, clock;
 
-	if (!(ah->ah_version == AR5K_AR5212) ||
-		!(channel->hw_value & CHANNEL_OFDM))
-		BUG();
+	BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
+		!(channel->hw_value & CHANNEL_OFDM));
 
 	/* Get coefficient
 	 * ALGO: coef = (5 * clock * carrier_freq) / 2)
@@ -508,7 +507,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
 
 		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
 			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ath5k_eeprom_is_hb63(ah))
+		else if (ee->ee_is_hb63)
 			scal = AR5K_PHY_SCAL_32MHZ_HB63;
 		else
 			scal = AR5K_PHY_SCAL_32MHZ;
@@ -537,26 +536,6 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
 	return;
 }
 
-static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
-				struct ieee80211_channel *channel)
-{
-	u8 refclk_freq;
-
-	if ((ah->ah_radio == AR5K_RF5112) ||
-	(ah->ah_radio == AR5K_RF5413) ||
-	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-		refclk_freq = 40;
-	else
-		refclk_freq = 32;
-
-	if ((channel->center_freq % refclk_freq != 0) &&
-	((channel->center_freq % refclk_freq < 10) ||
-	(channel->center_freq % refclk_freq > 22)))
-		return true;
-	else
-		return false;
-}
-
 /* TODO: Half/Quarter rate */
 static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
 				struct ieee80211_channel *channel)
@@ -599,9 +578,10 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
 	/* Set DAC/ADC delays */
 	if (ah->ah_version == AR5K_AR5212) {
 		u32 scal;
+		struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
 			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ath5k_eeprom_is_hb63(ah))
+		else if (ee->ee_is_hb63)
 			scal = AR5K_PHY_SCAL_32MHZ_HB63;
 		else
 			scal = AR5K_PHY_SCAL_32MHZ;
@@ -698,13 +678,13 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 	/* Set antenna idle switch table */
 	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
 			AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
-			(ah->ah_antenna[ee_mode][0] |
+			(ah->ah_ant_ctl[ee_mode][0] |
 			AR5K_PHY_ANT_CTL_TXRX_EN));
 
-	/* Set antenna switch table */
-	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+	/* Set antenna switch tables */
+	ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[0]],
 		AR5K_PHY_ANT_SWITCH_TABLE_0);
-	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+	ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[1]],
 		AR5K_PHY_ANT_SWITCH_TABLE_1);
 
 	/* Noise floor threshold */
@@ -998,10 +978,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		ath5k_hw_tweak_initval_settings(ah, channel);
 
 		/*
-		 * Set TX power (FIXME)
+		 * Set TX power
 		 */
 		ret = ath5k_hw_txpower(ah, channel, ee_mode,
-					AR5K_TUNE_DEFAULT_TXPOWER);
+					ah->ah_txpower.txp_max_pwr / 2);
 		if (ret)
 			return ret;
 
@@ -1024,9 +1004,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		/* Write OFDM timings on 5212*/
 		if (ah->ah_version == AR5K_AR5212 &&
 			channel->hw_value & CHANNEL_OFDM) {
+			struct ath5k_eeprom_info *ee =
+					&ah->ah_capabilities.cap_eeprom;
+
 			ret = ath5k_hw_write_ofdm_timings(ah, channel);
 			if (ret)
 				return ret;
+
+			/* Note: According to docs we can have a newer
+			 * EEPROM on old hardware, so we need to verify
+			 * that our hardware is new enough to have spur
+			 * mitigation registers (delta phase etc) */
+			if (ah->ah_mac_srev >= AR5K_SREV_AR5424 ||
+			(ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+			ee->ee_version >= AR5K_EEPROM_VERSION_5_3))
+				ath5k_hw_set_spur_mitigation_filter(ah,
+								channel);
 		}
 
 		/*Enable/disable 802.11b mode on 5111
@@ -1042,17 +1035,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 
 		/*
 		 * In case a fixed antenna was set as default
-		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
-		 * registers.
+		 * use the same switch table twice.
 		 */
-		if (s_ant != 0) {
-			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
-			else	/* 2 - Aux */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
-		} else {
-			ant[0] = AR5K_ANT_FIXED_A;
-			ant[1] = AR5K_ANT_FIXED_B;
+		if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
+				ant[0] = ant[1] = AR5K_ANT_SWTABLE_A;
+		else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
+				ant[0] = ant[1] = AR5K_ANT_SWTABLE_B;
+		else {
+			ant[0] = AR5K_ANT_SWTABLE_A;
+			ant[1] = AR5K_ANT_SWTABLE_B;
 		}
 
 		/* Commit values from EEPROM */
@@ -1260,6 +1251,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	 */
 	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 
+	/* Restore antenna mode */
+	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
 	/*
 	 * Configure QCUs/DCUs
@@ -1311,23 +1304,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	if (ah->ah_version != AR5K_AR5210)
 		ath5k_hw_set_imr(ah, ah->ah_imr);
 
-	/*
-	 * Setup RFKill interrupt if rfkill flag is set on eeprom.
-	 * TODO: Use gpio pin and polarity infos from eeprom
-	 * TODO: Handle this in ath5k_intr because it'll result
-	 * 	 a nasty interrupt storm.
-	 */
-#if 0
-	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
-		ath5k_hw_set_gpio_input(ah, 0);
-		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
-		if (ah->ah_gpio[0] == 0)
-			ath5k_hw_set_gpio_intr(ah, 0, 1);
-		else
-			ath5k_hw_set_gpio_intr(ah, 0, 0);
-	}
-#endif
-
 	/* Enable 32KHz clock function for AR5212+ chips
 	 * Set clocks to 32KHz operation and use an
 	 * external 32KHz crystal when sleeping if one
diff --git a/drivers/net/wireless/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
index e50baff6617..e50baff6617 100644
--- a/drivers/net/wireless/ath5k/rfbuffer.h
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
diff --git a/drivers/net/wireless/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h
index 1354d8c392c..1354d8c392c 100644
--- a/drivers/net/wireless/ath5k/rfgain.h
+++ b/drivers/net/wireless/ath/ath5k/rfgain.h
diff --git a/drivers/net/wireless/ath/ath5k/rfkill.c b/drivers/net/wireless/ath/ath5k/rfkill.c
new file mode 100644
index 00000000000..41a877b73fc
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfkill.c
@@ -0,0 +1,121 @@
+/*
+ * RFKILL support for ath5k
+ *
+ * Copyright (c) 2009 Tobias Doerffel <tobias.doerffel@gmail.com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include "base.h"
+
+
+static inline void ath5k_rfkill_disable(struct ath5k_softc *sc)
+{
+	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n",
+		sc->rf_kill.gpio, sc->rf_kill.polarity);
+	ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio);
+	ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, !sc->rf_kill.polarity);
+}
+
+
+static inline void ath5k_rfkill_enable(struct ath5k_softc *sc)
+{
+	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n",
+		sc->rf_kill.gpio, sc->rf_kill.polarity);
+	ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio);
+	ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, sc->rf_kill.polarity);
+}
+
+static inline void ath5k_rfkill_set_intr(struct ath5k_softc *sc, bool enable)
+{
+	struct ath5k_hw *ah = sc->ah;
+	u32 curval;
+
+	ath5k_hw_set_gpio_input(ah, sc->rf_kill.gpio);
+	curval = ath5k_hw_get_gpio(ah, sc->rf_kill.gpio);
+	ath5k_hw_set_gpio_intr(ah, sc->rf_kill.gpio, enable ?
+					!!curval : !curval);
+}
+
+static bool
+ath5k_is_rfkill_set(struct ath5k_softc *sc)
+{
+	/* configuring GPIO for input for some reason disables rfkill */
+	/*ath5k_hw_set_gpio_input(sc->ah, sc->rf_kill.gpio);*/
+	return ath5k_hw_get_gpio(sc->ah, sc->rf_kill.gpio) ==
+							sc->rf_kill.polarity;
+}
+
+static void
+ath5k_tasklet_rfkill_toggle(unsigned long data)
+{
+	struct ath5k_softc *sc = (void *)data;
+	bool blocked;
+
+	blocked = ath5k_is_rfkill_set(sc);
+	wiphy_rfkill_set_hw_state(sc->hw->wiphy, blocked);
+}
+
+
+void
+ath5k_rfkill_hw_start(struct ath5k_hw *ah)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+
+	/* read rfkill GPIO configuration from EEPROM header */
+	sc->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin;
+	sc->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol;
+
+	tasklet_init(&sc->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle,
+		(unsigned long)sc);
+
+	ath5k_rfkill_disable(sc);
+
+	/* enable interrupt for rfkill switch */
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header))
+		ath5k_rfkill_set_intr(sc, true);
+}
+
+
+void
+ath5k_rfkill_hw_stop(struct ath5k_hw *ah)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+
+	/* disable interrupt for rfkill switch */
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header))
+		ath5k_rfkill_set_intr(sc, false);
+
+	tasklet_kill(&sc->rf_kill.toggleq);
+
+	/* enable RFKILL when stopping HW so Wifi LED is turned off */
+	ath5k_rfkill_enable(sc);
+}
+
diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 90a8dd87378..0ed1ac312aa 100644
--- a/drivers/net/wireless/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -2,6 +2,7 @@ config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
 	depends on RFKILL || RFKILL=n
+	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 1a4d4eab6fe..783bc39eb2f 100644
--- a/drivers/net/wireless/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -4,7 +4,6 @@ ath9k-y +=	hw.o \
 		calib.o \
 		ani.o \
 		phy.o \
-		regd.o \
 		beacon.o \
 		main.o \
 		recv.o \
diff --git a/drivers/net/wireless/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 0e65c51ba17..0e65c51ba17 100644
--- a/drivers/net/wireless/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
diff --git a/drivers/net/wireless/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 6c5e887d50d..1aeafb511dd 100644
--- a/drivers/net/wireless/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -569,8 +569,7 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah,
 				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
 					"phyCnt1 0x%x, resetting "
 					"counter value to 0x%x\n",
-					phyCnt1,
-					aniState->ofdmPhyErrBase);
+					phyCnt1, aniState->ofdmPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_1,
 					  aniState->ofdmPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_MASK_1,
@@ -580,8 +579,7 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah,
 				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
 					"phyCnt2 0x%x, resetting "
 					"counter value to 0x%x\n",
-					phyCnt2,
-					aniState->cckPhyErrBase);
+					phyCnt2, aniState->cckPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_2,
 					  aniState->cckPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_MASK_2,
@@ -667,7 +665,7 @@ u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hw *ah,
 	u32 cc = REG_READ(ah, AR_CCCNT);
 
 	if (cycles == 0 || cycles > cc) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
 			"cycle counter wrap. ExtBusy = 0\n");
 		good = 0;
 	} else {
diff --git a/drivers/net/wireless/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 08b4e7ed5ff..08b4e7ed5ff 100644
--- a/drivers/net/wireless/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 2689a08a284..515880aa211 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -53,11 +53,7 @@ struct ath_node;
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
-#define ASSERT(exp) do {			\
-		if (unlikely(!(exp))) {		\
-			BUG();			\
-		}				\
-	} while (0)
+#define ASSERT(exp) BUG_ON(!(exp))
 
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
@@ -70,7 +66,6 @@ struct ath_config {
 	u32 ath_aggr_prot;
 	u16 txpowlimit;
 	u8 cabqReadytime;
-	u8 swBeaconProcess;
 };
 
 /*************************/
@@ -78,13 +73,17 @@ struct ath_config {
 /*************************/
 
 #define ATH_TXBUF_RESET(_bf) do {				\
-		(_bf)->bf_status = 0;				\
+		(_bf)->bf_stale = false;			\
 		(_bf)->bf_lastbf = NULL;			\
 		(_bf)->bf_next = NULL;				\
 		memset(&((_bf)->bf_state), 0,			\
 		       sizeof(struct ath_buf_state));		\
 	} while (0)
 
+#define ATH_RXBUF_RESET(_bf) do {		\
+		(_bf)->bf_stale = false;	\
+	} while (0)
+
 /**
  * enum buffer_type - Buffer type flags
  *
@@ -110,7 +109,7 @@ struct ath_buf_state {
 	int bfs_seqno;
 	int bfs_tidno;
 	int bfs_retries;
-	u32 bf_type;
+	u8 bf_type;
 	u32 bfs_keyix;
 	enum ath9k_key_type bfs_keytype;
 };
@@ -134,26 +133,21 @@ struct ath_buf {
 	struct ath_buf *bf_lastbf;	/* last buf of this unit (a frame or
 					   an aggregate) */
 	struct ath_buf *bf_next;	/* next subframe in the aggregate */
-	void *bf_mpdu;			/* enclosing frame structure */
+	struct sk_buff *bf_mpdu;	/* enclosing frame structure */
 	struct ath_desc *bf_desc;	/* virtual addr of desc */
 	dma_addr_t bf_daddr;		/* physical addr of desc */
 	dma_addr_t bf_buf_addr;		/* physical addr of data buffer */
-	u32 bf_status;
+	bool bf_stale;
 	u16 bf_flags;
 	struct ath_buf_state bf_state;
 	dma_addr_t bf_dmacontext;
 };
 
-#define ATH_RXBUF_RESET(_bf)    ((_bf)->bf_status = 0)
-#define ATH_BUFSTATUS_STALE     0x00000002
-
 struct ath_descdma {
-	const char *dd_name;
 	struct ath_desc *dd_desc;
 	dma_addr_t dd_desc_paddr;
 	u32 dd_desc_len;
 	struct ath_buf *dd_bufptr;
-	dma_addr_t dd_dmacontext;
 };
 
 int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
@@ -299,26 +293,6 @@ struct ath_tx_control {
 #define ATH_TX_XRETRY       0x02
 #define ATH_TX_BAR          0x04
 
-/* All RSSI values are noise floor adjusted */
-struct ath_tx_stat {
-	int rssi;
-	int rssictl[ATH_MAX_ANTENNA];
-	int rssiextn[ATH_MAX_ANTENNA];
-	int rateieee;
-	int rateKbps;
-	int ratecode;
-	int flags;
-	u32 airtime;	/* time on air per final tx rate */
-};
-
-struct aggr_rifs_param {
-	int param_max_frames;
-	int param_max_len;
-	int param_rl;
-	int param_al;
-	struct ath_rc_series *param_rcs;
-};
-
 struct ath_node {
 	struct ath_softc *an_sc;
 	struct ath_atx_tid tid[WME_NUM_TID];
@@ -366,7 +340,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
 void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an);
 void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq);
 int ath_tx_init(struct ath_softc *sc, int nbufs);
-int ath_tx_cleanup(struct ath_softc *sc);
+void ath_tx_cleanup(struct ath_softc *sc);
 struct ath_txq *ath_test_get_txq(struct ath_softc *sc, struct sk_buff *skb);
 int ath_txq_update(struct ath_softc *sc, int qnum,
 		   struct ath9k_tx_queue_info *q);
@@ -486,12 +460,9 @@ struct ath_led {
 	bool registered;
 };
 
-/* Rfkill */
-#define ATH_RFKILL_POLL_INTERVAL	2000 /* msecs */
-
 struct ath_rfkill {
 	struct rfkill *rfkill;
-	struct delayed_work rfkill_poll;
+	struct rfkill_ops ops;
 	char rfkill_name[32];
 };
 
@@ -529,19 +500,20 @@ struct ath_rfkill {
 #define SC_OP_BEACONS           BIT(1)
 #define SC_OP_RXAGGR            BIT(2)
 #define SC_OP_TXAGGR            BIT(3)
-#define SC_OP_CHAINMASK_UPDATE  BIT(4)
-#define SC_OP_FULL_RESET        BIT(5)
-#define SC_OP_PREAMBLE_SHORT    BIT(6)
-#define SC_OP_PROTECT_ENABLE    BIT(7)
-#define SC_OP_RXFLUSH           BIT(8)
-#define SC_OP_LED_ASSOCIATED    BIT(9)
-#define SC_OP_RFKILL_REGISTERED BIT(10)
-#define SC_OP_RFKILL_SW_BLOCKED BIT(11)
-#define SC_OP_RFKILL_HW_BLOCKED BIT(12)
-#define SC_OP_WAIT_FOR_BEACON   BIT(13)
-#define SC_OP_LED_ON            BIT(14)
-#define SC_OP_SCANNING          BIT(15)
-#define SC_OP_TSF_RESET         BIT(16)
+#define SC_OP_FULL_RESET        BIT(4)
+#define SC_OP_PREAMBLE_SHORT    BIT(5)
+#define SC_OP_PROTECT_ENABLE    BIT(6)
+#define SC_OP_RXFLUSH           BIT(7)
+#define SC_OP_LED_ASSOCIATED    BIT(8)
+#define SC_OP_RFKILL_REGISTERED BIT(9)
+#define SC_OP_WAIT_FOR_BEACON   BIT(12)
+#define SC_OP_LED_ON            BIT(13)
+#define SC_OP_SCANNING          BIT(14)
+#define SC_OP_TSF_RESET         BIT(15)
+#define SC_OP_WAIT_FOR_CAB      BIT(16)
+#define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
+#define SC_OP_WAIT_FOR_TX_ACK   BIT(18)
+#define SC_OP_BEACON_SYNC       BIT(19)
 
 struct ath_bus_ops {
 	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
@@ -603,8 +575,8 @@ struct ath_softc {
 	struct ath_tx tx;
 	struct ath_beacon beacon;
 	struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
-	struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
-	struct ath_rate_table *cur_rate_table;
+	const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
+	const struct ath_rate_table *cur_rate_table;
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 
 	struct ath_led radio_led;
@@ -617,6 +589,8 @@ struct ath_softc {
 	int led_on_cnt;
 	int led_off_cnt;
 
+	int beacon_interval;
+
 	struct ath_rfkill rf_kill;
 	struct ath_ani ani;
 	struct ath9k_node_stats nodestats;
@@ -624,6 +598,7 @@ struct ath_softc {
 	struct ath9k_debug debug;
 #endif
 	struct ath_bus_ops *bus_ops;
+	struct ath_beacon_config cur_beacon_conf;
 };
 
 struct ath_wiphy {
@@ -701,7 +676,9 @@ static inline void ath9k_ps_restore(struct ath_softc *sc)
 {
 	if (atomic_dec_and_test(&sc->ps_usecount))
 		if ((sc->hw->conf.flags & IEEE80211_CONF_PS) &&
-		    !(sc->sc_flags & SC_OP_WAIT_FOR_BEACON))
+		    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+				      SC_OP_WAIT_FOR_PSPOLL_DATA |
+				      SC_OP_WAIT_FOR_TX_ACK)))
 			ath9k_hw_setpower(sc->sc_ah,
 					  sc->sc_ah->restore_mode);
 }
@@ -722,36 +699,7 @@ void ath9k_wiphy_pause_all_forced(struct ath_softc *sc,
 bool ath9k_wiphy_scanning(struct ath_softc *sc);
 void ath9k_wiphy_work(struct work_struct *work);
 
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static inline void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-{
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-}
-
-static inline unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-{
-	u32 val;
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-	return val;
-}
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
 
 #endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index ec995730632..3639a2e6987 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -43,7 +43,7 @@ static int ath_beaconq_config(struct ath_softc *sc)
 
 	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"unable to update h/w beacon queue parameters\n");
+			"Unable to update h/w beacon queue parameters\n");
 		return 0;
 	} else {
 		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
@@ -59,11 +59,11 @@ static int ath_beaconq_config(struct ath_softc *sc)
 static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
 			     struct ath_buf *bf)
 {
-	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct sk_buff *skb = bf->bf_mpdu;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_desc *ds;
 	struct ath9k_11n_rate_series series[4];
-	struct ath_rate_table *rt;
+	const struct ath_rate_table *rt;
 	int flags, antenna, ctsrate = 0, ctsduration = 0;
 	u8 rate;
 
@@ -132,16 +132,13 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 	avp = (void *)vif->drv_priv;
 	cabq = sc->beacon.cabq;
 
-	if (avp->av_bcbuf == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n",
-			avp, avp->av_bcbuf);
+	if (avp->av_bcbuf == NULL)
 		return NULL;
-	}
 
 	/* Release the old beacon first */
 
 	bf = avp->av_bcbuf;
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	if (skb) {
 		dma_unmap_single(sc->dev, bf->bf_dmacontext,
 				 skb->len, DMA_TO_DEVICE);
@@ -229,7 +226,7 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc,
 		return;
 
 	bf = avp->av_bcbuf;
-	skb = (struct sk_buff *) bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 
 	ath_beacon_setup(sc, avp, bf);
 
@@ -302,7 +299,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 	/* release the previous beacon frame, if it already exists. */
 	bf = avp->av_bcbuf;
 	if (bf->bf_mpdu != NULL) {
-		skb = (struct sk_buff *)bf->bf_mpdu;
+		skb = bf->bf_mpdu;
 		dma_unmap_single(sc->dev, bf->bf_dmacontext,
 				 skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_any(skb);
@@ -323,8 +320,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 		u64 tsfadjust;
 		int intval;
 
-		intval = sc->hw->conf.beacon_int ?
-			sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+		intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 
 		/*
 		 * Calculate the TSF offset for this beacon slot, i.e., the
@@ -374,7 +370,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp)
 
 		bf = avp->av_bcbuf;
 		if (bf->bf_mpdu != NULL) {
-			struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+			struct sk_buff *skb = bf->bf_mpdu;
 			dma_unmap_single(sc->dev, bf->bf_dmacontext,
 					 skb->len, DMA_TO_DEVICE);
 			dev_kfree_skb_any(skb);
@@ -415,6 +411,7 @@ void ath_beacon_tasklet(unsigned long data)
 		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
 			DPRINTF(sc, ATH_DBG_BEACON,
 				"beacon is officially stuck\n");
+			sc->sc_flags |= SC_OP_TSF_RESET;
 			ath_reset(sc, false);
 		}
 
@@ -434,8 +431,7 @@ void ath_beacon_tasklet(unsigned long data)
 	 * on the tsf to safeguard against missing an swba.
 	 */
 
-	intval = sc->hw->conf.beacon_int ?
-		sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+	intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 
 	tsf = ath9k_hw_gettsf64(ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf);
@@ -512,8 +508,7 @@ void ath_beacon_tasklet(unsigned long data)
  * slot. Slots that are not occupied will generate nothing.
  */
 static void ath_beacon_config_ap(struct ath_softc *sc,
-				 struct ath_beacon_config *conf,
-				 struct ath_vif *avp)
+				 struct ath_beacon_config *conf)
 {
 	u32 nexttbtt, intval;
 
@@ -558,14 +553,14 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
  * we've associated with.
  */
 static void ath_beacon_config_sta(struct ath_softc *sc,
-				  struct ath_beacon_config *conf,
-				  struct ath_vif *avp)
+				  struct ath_beacon_config *conf)
 {
 	struct ath9k_beacon_state bs;
 	int dtimperiod, dtimcount, sleepduration;
 	int cfpperiod, cfpcount;
 	u32 nexttbtt = 0, intval, tsftu;
 	u64 tsf;
+	int num_beacons, offset, dtim_dec_count, cfp_dec_count;
 
 	memset(&bs, 0, sizeof(bs));
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
@@ -593,14 +588,27 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	 */
 	tsf = ath9k_hw_gettsf64(sc->sc_ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
-	do {
+
+	num_beacons = tsftu / intval + 1;
+	offset = tsftu % intval;
+	nexttbtt = tsftu - offset;
+	if (offset)
 		nexttbtt += intval;
-		if (--dtimcount < 0) {
-			dtimcount = dtimperiod - 1;
-			if (--cfpcount < 0)
-				cfpcount = cfpperiod - 1;
-		}
-	} while (nexttbtt < tsftu);
+
+	/* DTIM Beacon every dtimperiod Beacon */
+	dtim_dec_count = num_beacons % dtimperiod;
+	/* CFP every cfpperiod DTIM Beacon */
+	cfp_dec_count = (num_beacons / dtimperiod) % cfpperiod;
+	if (dtim_dec_count)
+		cfp_dec_count++;
+
+	dtimcount -= dtim_dec_count;
+	if (dtimcount < 0)
+		dtimcount += dtimperiod;
+
+	cfpcount -= cfp_dec_count;
+	if (cfpcount < 0)
+		cfpcount += cfpperiod;
 
 	bs.bs_intval = intval;
 	bs.bs_nexttbtt = nexttbtt;
@@ -659,7 +667,6 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 
 static void ath_beacon_config_adhoc(struct ath_softc *sc,
 				    struct ath_beacon_config *conf,
-				    struct ath_vif *avp,
 				    struct ieee80211_vif *vif)
 {
 	u64 tsf;
@@ -667,6 +674,14 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
 
+	/*
+	 * It looks like mac80211 may end up using beacon interval of zero in
+	 * some cases (at least for mesh point). Avoid getting into an
+	 * infinite loop by using a bit safer value instead..
+	 */
+	if (intval == 0)
+		intval = 100;
+
 	/* Pull nexttbtt forward to reflect the current TSF */
 
 	nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
@@ -703,44 +718,50 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
+	/* FIXME: Handle properly when vif is NULL */
+	if (vif && sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
 		ath_beacon_start_adhoc(sc, vif);
 }
 
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
-	struct ath_beacon_config conf;
+	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+	enum nl80211_iftype iftype;
 
 	/* Setup the beacon configuration parameters */
 
-	memset(&conf, 0, sizeof(struct ath_beacon_config));
-	conf.beacon_interval = sc->hw->conf.beacon_int ?
-		sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
-	conf.listen_interval = 1;
-	conf.dtim_period = conf.beacon_interval;
-	conf.dtim_count = 1;
-	conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
-
 	if (vif) {
-		struct ath_vif *avp = (struct ath_vif *)vif->drv_priv;
-
-		switch(avp->av_opmode) {
-		case NL80211_IFTYPE_AP:
-			ath_beacon_config_ap(sc, &conf, avp);
-			break;
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_MESH_POINT:
-			ath_beacon_config_adhoc(sc, &conf, avp, vif);
-			break;
-		case NL80211_IFTYPE_STATION:
-			ath_beacon_config_sta(sc, &conf, avp);
-			break;
-		default:
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"Unsupported beaconing mode\n");
-			return;
-		}
+		struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+
+		iftype = vif->type;
+
+		cur_conf->beacon_interval = bss_conf->beacon_int;
+		cur_conf->dtim_period = bss_conf->dtim_period;
+		cur_conf->listen_interval = 1;
+		cur_conf->dtim_count = 1;
+		cur_conf->bmiss_timeout =
+			ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
+	} else {
+		iftype = sc->sc_ah->opmode;
+	}
+
 
-		sc->sc_flags |= SC_OP_BEACONS;
+	switch (iftype) {
+	case NL80211_IFTYPE_AP:
+		ath_beacon_config_ap(sc, cur_conf);
+		break;
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
+		ath_beacon_config_adhoc(sc, cur_conf, vif);
+		break;
+	case NL80211_IFTYPE_STATION:
+		ath_beacon_config_sta(sc, cur_conf);
+		break;
+	default:
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"Unsupported beaconing mode\n");
+		return;
 	}
+
+	sc->sc_flags |= SC_OP_BEACONS;
 }
diff --git a/drivers/net/wireless/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index e2d62e97131..a32d7e7fecb 100644
--- a/drivers/net/wireless/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -186,7 +186,7 @@ static bool getNoiseFloorThresh(struct ath_hw *ah,
 }
 
 static void ath9k_hw_setup_calibration(struct ath_hw *ah,
-				       struct hal_cal_list *currCal)
+				       struct ath9k_cal_list *currCal)
 {
 	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
 		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
@@ -220,7 +220,7 @@ static void ath9k_hw_setup_calibration(struct ath_hw *ah,
 }
 
 static void ath9k_hw_reset_calibration(struct ath_hw *ah,
-				       struct hal_cal_list *currCal)
+				       struct ath9k_cal_list *currCal)
 {
 	int i;
 
@@ -238,13 +238,12 @@ static void ath9k_hw_reset_calibration(struct ath_hw *ah,
 	ah->cal_samples = 0;
 }
 
-static void ath9k_hw_per_calibration(struct ath_hw *ah,
+static bool ath9k_hw_per_calibration(struct ath_hw *ah,
 				     struct ath9k_channel *ichan,
 				     u8 rxchainmask,
-				     struct hal_cal_list *currCal,
-				     bool *isCalDone)
+				     struct ath9k_cal_list *currCal)
 {
-	*isCalDone = false;
+	bool iscaldone = false;
 
 	if (currCal->calState == CAL_RUNNING) {
 		if (!(REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
@@ -263,7 +262,7 @@ static void ath9k_hw_per_calibration(struct ath_hw *ah,
 				currCal->calData->calPostProc(ah, numChains);
 				ichan->CalValid |= currCal->calData->calType;
 				currCal->calState = CAL_DONE;
-				*isCalDone = true;
+				iscaldone = true;
 			} else {
 				ath9k_hw_setup_calibration(ah, currCal);
 			}
@@ -271,11 +270,13 @@ static void ath9k_hw_per_calibration(struct ath_hw *ah,
 	} else if (!(ichan->CalValid & currCal->calData->calType)) {
 		ath9k_hw_reset_calibration(ah, currCal);
 	}
+
+	return iscaldone;
 }
 
 /* Assumes you are talking about the currently configured channel */
 static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
-				     enum hal_cal_types calType)
+				     enum ath9k_cal_types calType)
 {
 	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
 
@@ -284,8 +285,8 @@ static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
 		return true;
 	case ADC_GAIN_CAL:
 	case ADC_DC_CAL:
-		if (conf->channel->band == IEEE80211_BAND_5GHZ &&
-		  conf_is_ht20(conf))
+		if (!(conf->channel->band == IEEE80211_BAND_2GHZ &&
+		      conf_is_ht20(conf)))
 			return true;
 		break;
 	}
@@ -498,7 +499,7 @@ static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 {
 	u32 iOddMeasOffset, iEvenMeasOffset, val, i;
 	int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
-	const struct hal_percal_data *calData =
+	const struct ath9k_percal_data *calData =
 		ah->cal_list_curr->calData;
 	u32 numSamples =
 		(1 << (calData->calCountMax + 5)) * calData->calNumSamples;
@@ -555,7 +556,7 @@ static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 {
 	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
-	struct hal_cal_list *currCal = ah->cal_list_curr;
+	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
 	if (!ah->curchan)
 		return true;
@@ -841,30 +842,28 @@ static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah)
 }
 
 bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-			u8 rxchainmask, bool longcal,
-			bool *isCalDone)
+			u8 rxchainmask, bool longcal)
 {
-	struct hal_cal_list *currCal = ah->cal_list_curr;
-
-	*isCalDone = true;
+	bool iscaldone = true;
+	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
 	if (currCal &&
 	    (currCal->calState == CAL_RUNNING ||
 	     currCal->calState == CAL_WAITING)) {
-		ath9k_hw_per_calibration(ah, chan, rxchainmask, currCal,
-					 isCalDone);
-		if (*isCalDone) {
+		iscaldone = ath9k_hw_per_calibration(ah, chan,
+						     rxchainmask, currCal);
+		if (iscaldone) {
 			ah->cal_list_curr = currCal = currCal->calNext;
 
 			if (currCal->calState == CAL_WAITING) {
-				*isCalDone = false;
+				iscaldone = false;
 				ath9k_hw_reset_calibration(ah, currCal);
 			}
 		}
 	}
 
 	if (longcal) {
-		if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
+		if (AR_SREV_9285_11_OR_LATER(ah))
 			ath9k_hw_9285_pa_cal(ah);
 
 		if (OLC_FOR_AR9280_20_LATER)
@@ -872,18 +871,15 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
 		ath9k_hw_getnf(ah, chan);
 		ath9k_hw_loadnf(ah, ah->curchan);
 		ath9k_hw_start_nfcal(ah);
-
-		if (chan->channelFlags & CHANNEL_CW_INT)
-			chan->channelFlags &= ~CHANNEL_CW_INT;
 	}
 
-	return true;
+	return iscaldone;
 }
 
 static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
-	if (chan->channelFlags & CHANNEL_HT20) {
+	if (IS_CHAN_HT20(chan)) {
 		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_PARALLEL_CAL_ENABLE);
 		REG_SET_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
 		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
@@ -919,83 +915,66 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 	return true;
 }
 
-bool ath9k_hw_init_cal(struct ath_hw *ah,
-		       struct ath9k_channel *chan)
+bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) {
+	if (AR_SREV_9285_12_OR_LATER(ah)) {
 		if (!ar9285_clc(ah, chan))
 			return false;
-	} else if (AR_SREV_9280_10_OR_LATER(ah)) {
-		REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
-		REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
+	} else {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		}
 
-		/* Kick off the cal */
+		/* Calibrate the AGC */
 		REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-				REG_READ(ah, AR_PHY_AGC_CONTROL) |
-				AR_PHY_AGC_CONTROL_CAL);
+			  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+			  AR_PHY_AGC_CONTROL_CAL);
 
-		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
-					AR_PHY_AGC_CONTROL_CAL, 0,
-					AH_WAIT_TIMEOUT)) {
+		/* Poll for offset calibration complete */
+		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
+				   0, AH_WAIT_TIMEOUT)) {
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
 				"offset calibration failed to complete in 1ms; "
 				"noisy environment?\n");
 			return false;
 		}
 
-		REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
-		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
-	}
-
-	/* Calibrate the AGC */
-	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			AR_PHY_AGC_CONTROL_CAL);
-
-	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
-				0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"offset calibration failed to complete in 1ms; "
-			"noisy environment?\n");
-		return false;
-	}
-
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+			REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		}
 	}
 
 	/* Do PA Calibration */
-	if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
+	if (AR_SREV_9285_11_OR_LATER(ah))
 		ath9k_hw_9285_pa_cal(ah);
 
-	/* Do NF Calibration */
+	/* Do NF Calibration after DC offset and other calibrations */
 	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			AR_PHY_AGC_CONTROL_NF);
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF);
 
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 
+	/* Enable IQ, ADC Gain and ADC DC offset CALs */
 	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
 		if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
 			INIT_CAL(&ah->adcgain_caldata);
 			INSERT_CAL(ah, &ah->adcgain_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling ADC Gain Calibration.\n");
+				"enabling ADC Gain Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
 			INIT_CAL(&ah->adcdc_caldata);
 			INSERT_CAL(ah, &ah->adcdc_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling ADC DC Calibration.\n");
+				"enabling ADC DC Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
 			INIT_CAL(&ah->iq_caldata);
 			INSERT_CAL(ah, &ah->iq_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling IQ Calibration.\n");
+				"enabling IQ Calibration.\n");
 		}
 
 		ah->cal_list_curr = ah->cal_list;
@@ -1009,49 +988,49 @@ bool ath9k_hw_init_cal(struct ath_hw *ah,
 	return true;
 }
 
-const struct hal_percal_data iq_cal_multi_sample = {
+const struct ath9k_percal_data iq_cal_multi_sample = {
 	IQ_MISMATCH_CAL,
 	MAX_CAL_SAMPLES,
 	PER_MIN_LOG_COUNT,
 	ath9k_hw_iqcal_collect,
 	ath9k_hw_iqcalibrate
 };
-const struct hal_percal_data iq_cal_single_sample = {
+const struct ath9k_percal_data iq_cal_single_sample = {
 	IQ_MISMATCH_CAL,
 	MIN_CAL_SAMPLES,
 	PER_MAX_LOG_COUNT,
 	ath9k_hw_iqcal_collect,
 	ath9k_hw_iqcalibrate
 };
-const struct hal_percal_data adc_gain_cal_multi_sample = {
+const struct ath9k_percal_data adc_gain_cal_multi_sample = {
 	ADC_GAIN_CAL,
 	MAX_CAL_SAMPLES,
 	PER_MIN_LOG_COUNT,
 	ath9k_hw_adc_gaincal_collect,
 	ath9k_hw_adc_gaincal_calibrate
 };
-const struct hal_percal_data adc_gain_cal_single_sample = {
+const struct ath9k_percal_data adc_gain_cal_single_sample = {
 	ADC_GAIN_CAL,
 	MIN_CAL_SAMPLES,
 	PER_MAX_LOG_COUNT,
 	ath9k_hw_adc_gaincal_collect,
 	ath9k_hw_adc_gaincal_calibrate
 };
-const struct hal_percal_data adc_dc_cal_multi_sample = {
+const struct ath9k_percal_data adc_dc_cal_multi_sample = {
 	ADC_DC_CAL,
 	MAX_CAL_SAMPLES,
 	PER_MIN_LOG_COUNT,
 	ath9k_hw_adc_dccal_collect,
 	ath9k_hw_adc_dccal_calibrate
 };
-const struct hal_percal_data adc_dc_cal_single_sample = {
+const struct ath9k_percal_data adc_dc_cal_single_sample = {
 	ADC_DC_CAL,
 	MIN_CAL_SAMPLES,
 	PER_MAX_LOG_COUNT,
 	ath9k_hw_adc_dccal_collect,
 	ath9k_hw_adc_dccal_calibrate
 };
-const struct hal_percal_data adc_init_dc_cal = {
+const struct ath9k_percal_data adc_init_dc_cal = {
 	ADC_DC_INIT_CAL,
 	MIN_CAL_SAMPLES,
 	INIT_LOG_COUNT,
diff --git a/drivers/net/wireless/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 1c74bd50700..fe5367f1414 100644
--- a/drivers/net/wireless/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -17,13 +17,13 @@
 #ifndef CALIB_H
 #define CALIB_H
 
-extern const struct hal_percal_data iq_cal_multi_sample;
-extern const struct hal_percal_data iq_cal_single_sample;
-extern const struct hal_percal_data adc_gain_cal_multi_sample;
-extern const struct hal_percal_data adc_gain_cal_single_sample;
-extern const struct hal_percal_data adc_dc_cal_multi_sample;
-extern const struct hal_percal_data adc_dc_cal_single_sample;
-extern const struct hal_percal_data adc_init_dc_cal;
+extern const struct ath9k_percal_data iq_cal_multi_sample;
+extern const struct ath9k_percal_data iq_cal_single_sample;
+extern const struct ath9k_percal_data adc_gain_cal_multi_sample;
+extern const struct ath9k_percal_data adc_gain_cal_single_sample;
+extern const struct ath9k_percal_data adc_dc_cal_multi_sample;
+extern const struct ath9k_percal_data adc_dc_cal_single_sample;
+extern const struct ath9k_percal_data adc_init_dc_cal;
 
 #define AR_PHY_CCA_MAX_GOOD_VALUE      		-85
 #define AR_PHY_CCA_MAX_HIGH_VALUE      		-62
@@ -67,14 +67,14 @@ struct ar5416IniArray {
 		}							\
 	} while (0)
 
-enum hal_cal_types {
+enum ath9k_cal_types {
 	ADC_DC_INIT_CAL = 0x1,
 	ADC_GAIN_CAL = 0x2,
 	ADC_DC_CAL = 0x4,
 	IQ_MISMATCH_CAL = 0x8
 };
 
-enum hal_cal_state {
+enum ath9k_cal_state {
 	CAL_INACTIVE,
 	CAL_WAITING,
 	CAL_RUNNING,
@@ -87,18 +87,18 @@ enum hal_cal_state {
 #define PER_MIN_LOG_COUNT   2
 #define PER_MAX_LOG_COUNT  10
 
-struct hal_percal_data {
-	enum hal_cal_types calType;
+struct ath9k_percal_data {
+	enum ath9k_cal_types calType;
 	u32 calNumSamples;
 	u32 calCountMax;
 	void (*calCollect) (struct ath_hw *);
 	void (*calPostProc) (struct ath_hw *, u8);
 };
 
-struct hal_cal_list {
-	const struct hal_percal_data *calData;
-	enum hal_cal_state calState;
-	struct hal_cal_list *calNext;
+struct ath9k_cal_list {
+	const struct ath9k_percal_data *calData;
+	enum ath9k_cal_state calState;
+	struct ath9k_cal_list *calNext;
 };
 
 struct ath9k_nfcal_hist {
@@ -116,8 +116,7 @@ int16_t ath9k_hw_getnf(struct ath_hw *ah,
 void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah);
 s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
 bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-			u8 rxchainmask, bool longcal,
-			bool *isCalDone);
+			u8 rxchainmask, bool longcal);
 bool ath9k_hw_init_cal(struct ath_hw *ah,
 		       struct ath9k_channel *chan);
 
diff --git a/drivers/net/wireless/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index fdf9528fa49..6d20725d645 100644
--- a/drivers/net/wireless/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -44,6 +44,44 @@ static int ath9k_debugfs_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static ssize_t read_file_debug(struct file *file, char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[32];
+	unsigned int len;
+
+	len = snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_debug(struct file *file, const char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long mask;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EINVAL;
+
+	buf[len] = '\0';
+	if (strict_strtoul(buf, 0, &mask))
+		return -EINVAL;
+
+	sc->debug.debug_mask = mask;
+	return count;
+}
+
+static const struct file_operations fops_debug = {
+	.read = read_file_debug,
+	.write = write_file_debug,
+	.open = ath9k_debugfs_open,
+	.owner = THIS_MODULE
+};
+
 static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
@@ -224,111 +262,66 @@ static const struct file_operations fops_interrupt = {
 	.owner = THIS_MODULE
 };
 
-static void ath_debug_stat_11n_rc(struct ath_softc *sc, struct sk_buff *skb)
-{
-	struct ath_tx_info_priv *tx_info_priv = NULL;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_tx_rate *rates = tx_info->status.rates;
-	int final_ts_idx, idx;
-
-	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	final_ts_idx = tx_info_priv->tx.ts_rateindex;
-	idx = sc->cur_rate_table->info[rates[final_ts_idx].idx].dot11rate;
-
-	sc->debug.stats.n_rcstats[idx].success++;
-}
-
-static void ath_debug_stat_legacy_rc(struct ath_softc *sc, struct sk_buff *skb)
+void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ath_tx_info_priv *tx_info_priv = NULL;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_rate *rates = tx_info->status.rates;
 	int final_ts_idx, idx;
+	struct ath_rc_stats *stats;
 
 	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
 	final_ts_idx = tx_info_priv->tx.ts_rateindex;
 	idx = rates[final_ts_idx].idx;
-
-	sc->debug.stats.legacy_rcstats[idx].success++;
+	stats = &sc->debug.stats.rcstats[idx];
+	stats->success++;
 }
 
-void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
-{
-	if (conf_is_ht(&sc->hw->conf))
-		ath_debug_stat_11n_rc(sc, skb);
-	else
-		ath_debug_stat_legacy_rc(sc, skb);
-}
-
-/* FIXME: legacy rates, later on .. */
 void ath_debug_stat_retries(struct ath_softc *sc, int rix,
 			    int xretries, int retries, u8 per)
 {
-	if (conf_is_ht(&sc->hw->conf)) {
-		int idx = sc->cur_rate_table->info[rix].dot11rate;
+	struct ath_rc_stats *stats = &sc->debug.stats.rcstats[rix];
 
-		sc->debug.stats.n_rcstats[idx].xretries += xretries;
-		sc->debug.stats.n_rcstats[idx].retries += retries;
-		sc->debug.stats.n_rcstats[idx].per = per;
-	}
+	stats->xretries += xretries;
+	stats->retries += retries;
+	stats->per = per;
 }
 
-static ssize_t ath_read_file_stat_11n_rc(struct file *file,
-					 char __user *user_buf,
-					 size_t count, loff_t *ppos)
+static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
-	char buf[1024];
-	unsigned int len = 0;
+	char *buf;
+	unsigned int len = 0, max;
 	int i = 0;
+	ssize_t retval;
 
-	len += sprintf(buf, "%7s %13s %8s %8s %6s\n\n", "Rate", "Success",
-		       "Retries", "XRetries", "PER");
-
-	for (i = 0; i <= 15; i++) {
-		len += snprintf(buf + len, sizeof(buf) - len,
-				"%5s%3d: %8u %8u %8u %8u\n", "MCS", i,
-				sc->debug.stats.n_rcstats[i].success,
-				sc->debug.stats.n_rcstats[i].retries,
-				sc->debug.stats.n_rcstats[i].xretries,
-				sc->debug.stats.n_rcstats[i].per);
-	}
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
+	if (sc->cur_rate_table == NULL)
+		return 0;
 
-static ssize_t ath_read_file_stat_legacy_rc(struct file *file,
-					    char __user *user_buf,
-					    size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char buf[512];
-	unsigned int len = 0;
-	int i = 0;
+	max = 80 + sc->cur_rate_table->rate_cnt * 64;
+	buf = kmalloc(max + 1, GFP_KERNEL);
+	if (buf == NULL)
+		return 0;
+	buf[max] = 0;
 
-	len += sprintf(buf, "%7s %13s\n\n", "Rate", "Success");
+	len += sprintf(buf, "%5s %15s %8s %9s %3s\n\n", "Rate", "Success",
+		       "Retries", "XRetries", "PER");
 
 	for (i = 0; i < sc->cur_rate_table->rate_cnt; i++) {
-		len += snprintf(buf + len, sizeof(buf) - len, "%5u: %12u\n",
-				sc->cur_rate_table->info[i].ratekbps / 1000,
-				sc->debug.stats.legacy_rcstats[i].success);
+		u32 ratekbps = sc->cur_rate_table->info[i].ratekbps;
+		struct ath_rc_stats *stats = &sc->debug.stats.rcstats[i];
+
+		len += snprintf(buf + len, max - len,
+			"%3u.%d: %8u %8u %8u %8u\n", ratekbps / 1000,
+			(ratekbps % 1000) / 100, stats->success,
+			stats->retries, stats->xretries,
+			stats->per);
 	}
 
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
-				size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-
-	if (sc->cur_rate_table == NULL)
-		return 0;
-
-	if (conf_is_ht(&sc->hw->conf))
-		return ath_read_file_stat_11n_rc(file, user_buf, count, ppos);
-	else
-		return ath_read_file_stat_legacy_rc(file, user_buf, count ,ppos);
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+	return retval;
 }
 
 static const struct file_operations fops_rcstat = {
@@ -498,11 +491,19 @@ int ath9k_init_debug(struct ath_softc *sc)
 {
 	sc->debug.debug_mask = ath9k_debug;
 
+	if (!ath9k_debugfs_root)
+		return -ENOENT;
+
 	sc->debug.debugfs_phy = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
 						      ath9k_debugfs_root);
 	if (!sc->debug.debugfs_phy)
 		goto err;
 
+	sc->debug.debugfs_debug = debugfs_create_file("debug",
+		S_IRUGO | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_debug);
+	if (!sc->debug.debugfs_debug)
+		goto err;
+
 	sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUGO,
 				       sc->debug.debugfs_phy, sc, &fops_dma);
 	if (!sc->debug.debugfs_dma)
@@ -540,6 +541,7 @@ void ath9k_exit_debug(struct ath_softc *sc)
 	debugfs_remove(sc->debug.debugfs_rcstat);
 	debugfs_remove(sc->debug.debugfs_interrupt);
 	debugfs_remove(sc->debug.debugfs_dma);
+	debugfs_remove(sc->debug.debugfs_debug);
 	debugfs_remove(sc->debug.debugfs_phy);
 }
 
diff --git a/drivers/net/wireless/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 7b0e5419d2b..edda15bf2c1 100644
--- a/drivers/net/wireless/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -19,20 +19,17 @@
 
 enum ATH_DEBUG {
 	ATH_DBG_RESET		= 0x00000001,
-	ATH_DBG_REG_IO		= 0x00000002,
-	ATH_DBG_QUEUE		= 0x00000004,
-	ATH_DBG_EEPROM		= 0x00000008,
-	ATH_DBG_CALIBRATE	= 0x00000010,
-	ATH_DBG_CHANNEL		= 0x00000020,
-	ATH_DBG_INTERRUPT	= 0x00000040,
-	ATH_DBG_REGULATORY	= 0x00000080,
-	ATH_DBG_ANI		= 0x00000100,
-	ATH_DBG_POWER_MGMT	= 0x00000200,
-	ATH_DBG_XMIT		= 0x00000400,
-	ATH_DBG_BEACON		= 0x00001000,
-	ATH_DBG_CONFIG		= 0x00002000,
-	ATH_DBG_KEYCACHE	= 0x00004000,
-	ATH_DBG_FATAL		= 0x00008000,
+	ATH_DBG_QUEUE		= 0x00000002,
+	ATH_DBG_EEPROM		= 0x00000004,
+	ATH_DBG_CALIBRATE	= 0x00000008,
+	ATH_DBG_INTERRUPT	= 0x00000010,
+	ATH_DBG_REGULATORY	= 0x00000020,
+	ATH_DBG_ANI		= 0x00000040,
+	ATH_DBG_XMIT		= 0x00000080,
+	ATH_DBG_BEACON		= 0x00000100,
+	ATH_DBG_CONFIG		= 0x00000200,
+	ATH_DBG_FATAL		= 0x00000400,
+	ATH_DBG_PS		= 0x00000800,
 	ATH_DBG_ANY		= 0xffffffff
 };
 
@@ -83,11 +80,7 @@ struct ath_interrupt_stats {
 	u32 dtim;
 };
 
-struct ath_legacy_rc_stats {
-	u32 success;
-};
-
-struct ath_11n_rc_stats {
+struct ath_rc_stats {
 	u32 success;
 	u32 retries;
 	u32 xretries;
@@ -96,13 +89,13 @@ struct ath_11n_rc_stats {
 
 struct ath_stats {
 	struct ath_interrupt_stats istats;
-	struct ath_legacy_rc_stats legacy_rcstats[12];	/* max(11a,11b,11g) */
-	struct ath_11n_rc_stats n_rcstats[16];		/* 0..15 MCS rates */
+	struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
 };
 
 struct ath9k_debug {
 	int debug_mask;
 	struct dentry *debugfs_phy;
+	struct dentry *debugfs_debug;
 	struct dentry *debugfs_dma;
 	struct dentry *debugfs_interrupt;
 	struct dentry *debugfs_rcstat;
diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index ffc36b0361c..a2fda702b62 100644
--- a/drivers/net/wireless/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -694,7 +694,7 @@ static void ath9k_hw_get_4k_gain_boundaries_pdadcs(struct ath_hw *ah,
 #undef TMP_VAL_VPD_TABLE
 }
 
-static bool ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
+static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
 {
@@ -783,11 +783,11 @@ static bool ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC (%d,%4x): %4.4x %8.8x\n",
 					i, regChainOffset, regOffset,
 					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC: Chain %d | "
 					"PDADC %3d Value %3d | "
 					"PDADC %3d Value %3d | "
@@ -805,11 +805,9 @@ static bool ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 	}
 
 	*pTxPowerIndexOffset = 0;
-
-	return true;
 }
 
-static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
+static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 						 struct ath9k_channel *chan,
 						 int16_t *ratesArray,
 						 u16 cfgCtl,
@@ -910,7 +908,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 		    ah->eep_ops->get_eeprom_rev(ah) <= 2)
 			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
 			"EXT_ADDITIVE %d\n",
 			ctlMode, numCtlModes, isHt40CtlMode,
@@ -918,7 +916,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 
 		for (i = 0; (i < AR5416_NUM_CTLS) &&
 				pEepData->ctlIndex[i]; i++) {
-			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
 				"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
 				"chan %d\n",
@@ -941,7 +939,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 				IS_CHAN_2GHZ(chan),
 				AR5416_EEP4K_NUM_BAND_EDGES);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"    MATCH-EE_IDX %d: ch %d is2 %d "
 					"2xMinEdge %d chainmask %d chains %d\n",
 					i, freq, IS_CHAN_2GHZ(chan),
@@ -961,7 +959,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 
 		minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"    SEL-Min ctlMode %d pCtlMode %d "
 			"2xMaxEdge %d sP %d minCtlPwr %d\n",
 			ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
@@ -1041,10 +1039,9 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 		ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
 		ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0];
 	}
-	return true;
 }
 
-static int ath9k_hw_4k_set_txpower(struct ath_hw *ah,
+static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 				   struct ath9k_channel *chan,
 				   u16 cfgCtl,
 				   u8 twiceAntennaReduction,
@@ -1065,22 +1062,13 @@ static int ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 		ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
 	}
 
-	if (!ath9k_hw_set_4k_power_per_rate_table(ah, chan,
+	ath9k_hw_set_4k_power_per_rate_table(ah, chan,
 					       &ratesArray[0], cfgCtl,
 					       twiceAntennaReduction,
 					       twiceMaxRegulatoryPower,
-					       powerLimit)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"ath9k_hw_set_txpower: unable to set "
-			"tx power per rate table\n");
-		return -EIO;
-	}
+					       powerLimit);
 
-	if (!ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			 "ath9k_hw_set_txpower: unable to set power table\n");
-		return -EIO;
-	}
+	ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset);
 
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] =	(int16_t)(txPowerIndexOffset + ratesArray[i]);
@@ -1168,7 +1156,6 @@ static int ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 	else
 		ah->regulatory.max_power_level = ratesArray[i];
 
-	return 0;
 }
 
 static void ath9k_hw_4k_set_addac(struct ath_hw *ah,
@@ -2103,7 +2090,7 @@ static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah,
 	return;
 }
 
-static bool ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
+static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
 {
@@ -2234,11 +2221,11 @@ static bool ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC (%d,%4x): %4.4x %8.8x\n",
 					i, regChainOffset, regOffset,
 					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC: Chain %d | PDADC %3d "
 					"Value %3d | PDADC %3d Value %3d | "
 					"PDADC %3d Value %3d | PDADC %3d "
@@ -2255,13 +2242,11 @@ static bool ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 	}
 
 	*pTxPowerIndexOffset = 0;
-
-	return true;
 #undef SM_PD_GAIN
 #undef SM_PDGAIN_B
 }
 
-static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
+static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 						  struct ath9k_channel *chan,
 						  int16_t *ratesArray,
 						  u16 cfgCtl,
@@ -2415,14 +2400,14 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 		    ah->eep_ops->get_eeprom_rev(ah) <= 2)
 			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
 			"EXT_ADDITIVE %d\n",
 			ctlMode, numCtlModes, isHt40CtlMode,
 			(pCtlMode[ctlMode] & EXT_ADDITIVE));
 
 		for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
-			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
 				"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
 				"chan %d\n",
@@ -2441,7 +2426,7 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 				rep->ctlEdges[ar5416_get_ntxchains(tx_chainmask) - 1],
 				IS_CHAN_2GHZ(chan), AR5416_NUM_BAND_EDGES);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"    MATCH-EE_IDX %d: ch %d is2 %d "
 					"2xMinEdge %d chainmask %d chains %d\n",
 					i, freq, IS_CHAN_2GHZ(chan),
@@ -2460,7 +2445,7 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 
 		minCtlPower = min(twiceMaxEdgePower, scaledPower);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"    SEL-Min ctlMode %d pCtlMode %d "
 			"2xMaxEdge %d sP %d minCtlPwr %d\n",
 			ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
@@ -2549,10 +2534,9 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 				targetPowerCckExt.tPow2x[0];
 		}
 	}
-	return true;
 }
 
-static int ath9k_hw_def_set_txpower(struct ath_hw *ah,
+static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 				    struct ath9k_channel *chan,
 				    u16 cfgCtl,
 				    u8 twiceAntennaReduction,
@@ -2575,22 +2559,13 @@ static int ath9k_hw_def_set_txpower(struct ath_hw *ah,
 		ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
 	}
 
-	if (!ath9k_hw_set_def_power_per_rate_table(ah, chan,
+	ath9k_hw_set_def_power_per_rate_table(ah, chan,
 					       &ratesArray[0], cfgCtl,
 					       twiceAntennaReduction,
 					       twiceMaxRegulatoryPower,
-					       powerLimit)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"ath9k_hw_set_txpower: unable to set "
-			"tx power per rate table\n");
-		return -EIO;
-	}
+					       powerLimit);
 
-	if (!ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			 "ath9k_hw_set_txpower: unable to set power table\n");
-		return -EIO;
-	}
+	ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset);
 
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] =	(int16_t)(txPowerIndexOffset + ratesArray[i]);
@@ -2717,8 +2692,6 @@ static int ath9k_hw_def_set_txpower(struct ath_hw *ah,
 			"Invalid chainmask configuration\n");
 		break;
 	}
-
-	return 0;
 }
 
 static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 25b68c881ff..67b8bd12941 100644
--- a/drivers/net/wireless/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -17,6 +17,8 @@
 #ifndef EEPROM_H
 #define EEPROM_H
 
+#include <net/cfg80211.h>
+
 #define AH_USE_EEPROM   0x1
 
 #ifdef __BIG_ENDIAN
@@ -492,7 +494,7 @@ struct eeprom_ops {
 				      struct ath9k_channel *chan);
 	void (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan);
 	void (*set_addac)(struct ath_hw *hw, struct ath9k_channel *chan);
-	int (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan,
+	void (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan,
 			   u16 cfgCtl, u8 twiceAntennaReduction,
 			   u8 twiceMaxRegulatoryPower, u8 powerLimit);
 	u16 (*get_spur_channel)(struct ath_hw *ah, u16 i, bool is2GHz);
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index b15eaf8417f..1579c9407ed 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -84,6 +84,38 @@ static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs)
 		return ath9k_hw_mac_clks(ah, usecs);
 }
 
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
+{
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
+{
+	u32 val;
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+	return val;
+}
+
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 {
 	int i;
@@ -97,7 +129,7 @@ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 		udelay(AH_TIME_QUANTUM);
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+	DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 		"timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
 		timeout, reg, REG_READ(ah, reg), mask, val);
 
@@ -136,7 +168,7 @@ bool ath9k_get_channel_edges(struct ath_hw *ah,
 }
 
 u16 ath9k_hw_computetxtime(struct ath_hw *ah,
-			   struct ath_rate_table *rates,
+			   const struct ath_rate_table *rates,
 			   u32 frameLen, u16 rateix,
 			   bool shortPreamble)
 {
@@ -181,7 +213,7 @@ u16 ath9k_hw_computetxtime(struct ath_hw *ah,
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Unknown phy %u (rate ix %u)\n",
 			rates->info[rateix].phy, rateix);
 		txTime = 0;
@@ -306,7 +338,7 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (rdData != wrData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 					"address test failed "
 					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
 					addr, wrData, rdData);
@@ -318,7 +350,7 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (wrData != rdData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 					"address test failed "
 					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
 					addr, wrData, rdData);
@@ -363,10 +395,7 @@ static void ath9k_hw_set_defaults(struct ath_hw *ah)
 	ah->config.ack_6mb = 0x0;
 	ah->config.cwm_ignore_extcca = 0;
 	ah->config.pcie_powersave_enable = 0;
-	ah->config.pcie_l1skp_enable = 0;
 	ah->config.pcie_clock_req = 0;
-	ah->config.pcie_power_reset = 0x100;
-	ah->config.pcie_restore = 0;
 	ah->config.pcie_waen = 0;
 	ah->config.analog_shiftreg = 1;
 	ah->config.ht_enable = 1;
@@ -375,13 +404,6 @@ static void ath9k_hw_set_defaults(struct ath_hw *ah)
 	ah->config.cck_trig_high = 200;
 	ah->config.cck_trig_low = 100;
 	ah->config.enable_ani = 1;
-	ah->config.noise_immunity_level = 4;
-	ah->config.ofdm_weaksignal_det = 1;
-	ah->config.cck_weaksignal_thr = 0;
-	ah->config.spur_immunity_level = 2;
-	ah->config.firstep_level = 0;
-	ah->config.rssi_thr_high = 40;
-	ah->config.rssi_thr_low = 7;
 	ah->config.diversity_control = 0;
 	ah->config.antenna_switch_swap = 0;
 
@@ -390,7 +412,7 @@ static void ath9k_hw_set_defaults(struct ath_hw *ah)
 		ah->config.spurchans[i][1] = AR_NO_SPUR;
 	}
 
-	ah->config.intr_mitigation = 1;
+	ah->config.intr_mitigation = true;
 
 	/*
 	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
@@ -463,8 +485,8 @@ static int ath9k_hw_rfattach(struct ath_hw *ah)
 
 	rfStatus = ath9k_hw_init_rf(ah, &ecode);
 	if (!rfStatus) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
-			"RF setup failed, status %u\n", ecode);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"RF setup failed, status: %u\n", ecode);
 		return ecode;
 	}
 
@@ -488,10 +510,9 @@ static int ath9k_hw_rf_claim(struct ath_hw *ah)
 	case AR_RAD2122_SREV_MAJOR:
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
-			"5G Radio Chip Rev 0x%02X is not "
-			"supported by this driver\n",
-			ah->hw_version.analog5GhzRev);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"Radio Chip Rev 0x%02X not supported\n",
+			val & AR_RADIO_SREV_MAJOR);
 		return -EOPNOTSUPP;
 	}
 
@@ -513,12 +534,8 @@ static int ath9k_hw_init_macaddr(struct ath_hw *ah)
 		ah->macaddr[2 * i] = eeval >> 8;
 		ah->macaddr[2 * i + 1] = eeval & 0xff;
 	}
-	if (sum == 0 || sum == 0xffff * 3) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"mac address read failed: %pM\n",
-			ah->macaddr);
+	if (sum == 0 || sum == 0xffff * 3)
 		return -EADDRNOTAVAIL;
-	}
 
 	return 0;
 }
@@ -575,11 +592,8 @@ static int ath9k_hw_post_attach(struct ath_hw *ah)
 {
 	int ecode;
 
-	if (!ath9k_hw_chip_test(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
-			"hardware self-test failed\n");
+	if (!ath9k_hw_chip_test(ah))
 		return -ENODEV;
-	}
 
 	ecode = ath9k_hw_rf_claim(ah);
 	if (ecode != 0)
@@ -617,17 +631,14 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 
 	ath9k_hw_set_defaults(ah);
 
-	if (ah->config.intr_mitigation != 0)
-		ah->intr_mitigation = true;
-
 	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
-		DPRINTF(sc, ATH_DBG_RESET, "Couldn't reset chip\n");
+		DPRINTF(sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
 		ecode = -EIO;
 		goto bad;
 	}
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
-		DPRINTF(sc, ATH_DBG_RESET, "Couldn't wakeup chip\n");
+		DPRINTF(sc, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
 		ecode = -EIO;
 		goto bad;
 	}
@@ -650,7 +661,7 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	    (ah->hw_version.macVersion != AR_SREV_VERSION_5416_PCIE) &&
 	    (ah->hw_version.macVersion != AR_SREV_VERSION_9160) &&
 	    (!AR_SREV_9100(ah)) && (!AR_SREV_9280(ah)) && (!AR_SREV_9285(ah))) {
-		DPRINTF(sc, ATH_DBG_RESET,
+		DPRINTF(sc, ATH_DBG_FATAL,
 			"Mac Chip Rev 0x%02x.%x is not supported by "
 			"this driver\n", ah->hw_version.macVersion,
 			ah->hw_version.macRev);
@@ -690,10 +701,6 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	if (AR_SREV_9280_10_OR_LATER(ah))
 		ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
 
-	DPRINTF(sc, ATH_DBG_RESET,
-		"This Mac Chip Rev 0x%02x.%x is \n",
-		ah->hw_version.macVersion, ah->hw_version.macRev);
-
 	if (AR_SREV_9285_12_OR_LATER(ah)) {
 
 		INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2,
@@ -859,11 +866,7 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	if (AR_SREV_9280_20(ah))
 		ath9k_hw_init_txgain_ini(ah);
 
-	if (!ath9k_hw_fill_cap_info(ah)) {
-		DPRINTF(sc, ATH_DBG_RESET, "failed ath9k_hw_fill_cap_info\n");
-		ecode = -EINVAL;
-		goto bad;
-	}
+	ath9k_hw_fill_cap_info(ah);
 
 	if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
 	    test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
@@ -885,8 +888,8 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 
 	ecode = ath9k_hw_init_macaddr(ah);
 	if (ecode != 0) {
-		DPRINTF(sc, ATH_DBG_RESET,
-			"failed initializing mac address\n");
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"Failed to initialize MAC address\n");
 		goto bad;
 	}
 
@@ -1054,7 +1057,7 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
 		AR_IMR_RXORN |
 		AR_IMR_BCNMISC;
 
-	if (ah->intr_mitigation)
+	if (ah->config.intr_mitigation)
 		ah->mask_reg |= AR_IMR_RXINTM | AR_IMR_RXMINTR;
 	else
 		ah->mask_reg |= AR_IMR_RXOK;
@@ -1203,23 +1206,23 @@ static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah,
 	switch (ah->hw_version.devid) {
 	case AR9280_DEVID_PCI:
 		if (reg == 0x7894) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"ini VAL: %x  EEPROM: %x\n", value,
 				(pBase->version & 0xff));
 
 			if ((pBase->version & 0xff) > 0x0a) {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PWDCLKIND: %d\n",
 					pBase->pwdclkind);
 				value &= ~AR_AN_TOP2_PWDCLKIND;
 				value |= AR_AN_TOP2_PWDCLKIND &
 					(pBase->pwdclkind << AR_AN_TOP2_PWDCLKIND_S);
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PWDCLKIND Earlier Rev\n");
 			}
 
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"final ini VAL: %x\n", value);
 		}
 		break;
@@ -1249,6 +1252,21 @@ static void ath9k_olc_init(struct ath_hw *ah)
 	ah->PDADCdelta = 0;
 }
 
+static u32 ath9k_regd_get_ctl(struct ath_regulatory *reg,
+			      struct ath9k_channel *chan)
+{
+	u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band);
+
+	if (IS_CHAN_B(chan))
+		ctl |= CTL_11B;
+	else if (IS_CHAN_G(chan))
+		ctl |= CTL_11G;
+	else
+		ctl |= CTL_11A;
+
+	return ctl;
+}
+
 static int ath9k_hw_process_ini(struct ath_hw *ah,
 				struct ath9k_channel *chan,
 				enum ath9k_ht_macmode macmode)
@@ -1256,7 +1274,6 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 	int i, regWrites = 0;
 	struct ieee80211_channel *channel = chan->chan;
 	u32 modesIndex, freqIndex;
-	int status;
 
 	switch (chan->chanmode) {
 	case CHANNEL_A:
@@ -1327,8 +1344,7 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 	if (AR_SREV_9280(ah))
 		REG_WRITE_ARRAY(&ah->iniModesRxGain, modesIndex, regWrites);
 
-	if (AR_SREV_9280(ah) || (AR_SREV_9285(ah) &&
-	    AR_SREV_9285_12_OR_LATER(ah)))
+	if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah))
 		REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
 
 	for (i = 0; i < ah->iniCommon.ia_rows; i++) {
@@ -1359,20 +1375,15 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 	if (OLC_FOR_AR9280_20_LATER)
 		ath9k_olc_init(ah);
 
-	status = ah->eep_ops->set_txpower(ah, chan,
-				  ath9k_regd_get_ctl(ah, chan),
-				  channel->max_antenna_gain * 2,
-				  channel->max_power * 2,
-				  min((u32) MAX_RATE_POWER,
-				      (u32) ah->regulatory.power_limit));
-	if (status != 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
-			"error init'ing transmit power\n");
-		return -EIO;
-	}
+	ah->eep_ops->set_txpower(ah, chan,
+				 ath9k_regd_get_ctl(&ah->regulatory, chan),
+				 channel->max_antenna_gain * 2,
+				 channel->max_power * 2,
+				 min((u32) MAX_RATE_POWER,
+				 (u32) ah->regulatory.power_limit));
 
 	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"ar5416SetRfRegs failed\n");
 		return -EIO;
 	}
@@ -1600,11 +1611,9 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type)
 	switch (type) {
 	case ATH9K_RESET_POWER_ON:
 		return ath9k_hw_set_reset_power_on(ah);
-		break;
 	case ATH9K_RESET_WARM:
 	case ATH9K_RESET_COLD:
 		return ath9k_hw_set_reset(ah, type);
-		break;
 	default:
 		return false;
 	}
@@ -1678,7 +1687,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
 	if (!ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
 			   AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Could not kill baseband RX\n");
 		return false;
 	}
@@ -1686,29 +1695,21 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	ath9k_hw_set_regs(ah, chan, macmode);
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		if (!(ath9k_hw_ar9280_set_channel(ah, chan))) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
-				"failed to set channel\n");
-			return false;
-		}
+		ath9k_hw_ar9280_set_channel(ah, chan);
 	} else {
 		if (!(ath9k_hw_set_channel(ah, chan))) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
-				"failed to set channel\n");
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				"Failed to set channel\n");
 			return false;
 		}
 	}
 
-	if (ah->eep_ops->set_txpower(ah, chan,
-			     ath9k_regd_get_ctl(ah, chan),
+	ah->eep_ops->set_txpower(ah, chan,
+			     ath9k_regd_get_ctl(&ah->regulatory, chan),
 			     channel->max_antenna_gain * 2,
 			     channel->max_power * 2,
 			     min((u32) MAX_RATE_POWER,
-				 (u32) ah->regulatory.power_limit)) != 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"error init'ing transmit power\n");
-		return false;
-	}
+			     (u32) ah->regulatory.power_limit));
 
 	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
 	if (IS_CHAN_B(chan))
@@ -2199,14 +2200,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ah->txchainmask = sc->tx_chainmask;
 	ah->rxchainmask = sc->rx_chainmask;
 
-	if (AR_SREV_9285(ah)) {
-		ah->txchainmask &= 0x1;
-		ah->rxchainmask &= 0x1;
-	} else if (AR_SREV_9280(ah)) {
-		ah->txchainmask &= 0x3;
-		ah->rxchainmask &= 0x3;
-	}
-
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
 
@@ -2242,7 +2235,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_mark_phy_inactive(ah);
 
 	if (!ath9k_hw_chip_reset(ah, chan)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "chip reset failed\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Chip reset failed\n");
 		return -EINVAL;
 	}
 
@@ -2304,13 +2297,11 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
 
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		if (!(ath9k_hw_ar9280_set_channel(ah, chan)))
-			return -EIO;
-	} else {
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_ar9280_set_channel(ah, chan);
+	else
 		if (!(ath9k_hw_set_channel(ah, chan)))
 			return -EIO;
-	}
 
 	for (i = 0; i < AR_NUM_DCU; i++)
 		REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
@@ -2335,8 +2326,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	REG_WRITE(ah, AR_OBS, 8);
 
-	if (ah->intr_mitigation) {
-
+	if (ah->config.intr_mitigation) {
 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000);
 	}
@@ -2385,8 +2375,8 @@ bool ath9k_hw_keyreset(struct ath_hw *ah, u16 entry)
 	u32 keyType;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
-			"entry %u out of range\n", entry);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2422,8 +2412,8 @@ bool ath9k_hw_keysetmac(struct ath_hw *ah, u16 entry, const u8 *mac)
 	u32 macHi, macLo;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
-			"entry %u out of range\n", entry);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2454,8 +2444,8 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 	u32 keyType;
 
 	if (entry >= pCap->keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
-			"entry %u out of range\n", entry);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2465,7 +2455,7 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 		break;
 	case ATH9K_CIPHER_AES_CCM:
 		if (!(pCap->hw_caps & ATH9K_HW_CAP_CIPHER_AESCCM)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 				"AES-CCM not supported by mac rev 0x%x\n",
 				ah->hw_version.macRev);
 			return false;
@@ -2476,20 +2466,20 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 		keyType = AR_KEYTABLE_TYPE_TKIP;
 		if (ATH9K_IS_MIC_ENABLED(ah)
 		    && entry + 64 >= pCap->keycache_size) {
-			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 				"entry %u inappropriate for TKIP\n", entry);
 			return false;
 		}
 		break;
 	case ATH9K_CIPHER_WEP:
-		if (k->kv_len < LEN_WEP40) {
-			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+		if (k->kv_len < WLAN_KEY_LEN_WEP40) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 				"WEP key length %u too small\n", k->kv_len);
 			return false;
 		}
-		if (k->kv_len <= LEN_WEP40)
+		if (k->kv_len <= WLAN_KEY_LEN_WEP40)
 			keyType = AR_KEYTABLE_TYPE_40;
-		else if (k->kv_len <= LEN_WEP104)
+		else if (k->kv_len <= WLAN_KEY_LEN_WEP104)
 			keyType = AR_KEYTABLE_TYPE_104;
 		else
 			keyType = AR_KEYTABLE_TYPE_128;
@@ -2498,7 +2488,7 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 		keyType = AR_KEYTABLE_TYPE_CLR;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"cipher %u not supported\n", k->kv_type);
 		return false;
 	}
@@ -2508,7 +2498,7 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 	key2 = get_unaligned_le32(k->kv_val + 6);
 	key3 = get_unaligned_le16(k->kv_val + 10);
 	key4 = get_unaligned_le32(k->kv_val + 12);
-	if (k->kv_len <= LEN_WEP104)
+	if (k->kv_len <= WLAN_KEY_LEN_WEP104)
 		key4 &= 0xff;
 
 	/*
@@ -2716,7 +2706,7 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
 				    AR_RTC_FORCE_WAKE_EN);
 		}
 		if (i == 0) {
-			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 				"Failed to wakeup in %uus\n", POWER_UP_TIME / 20);
 			return false;
 		}
@@ -2737,9 +2727,8 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 		"UNDEFINED"
 	};
 
-	DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT, "%s -> %s (%s)\n",
-		modes[ah->power_mode], modes[mode],
-		setChip ? "set chip " : "");
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s -> %s\n",
+		modes[ah->power_mode], modes[mode]);
 
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
@@ -2753,7 +2742,7 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 		ath9k_set_power_network_sleep(ah, setChip);
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Unknown power mode %u\n", mode);
 		return false;
 	}
@@ -2943,7 +2932,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 
 		*masked = isr & ATH9K_INT_COMMON;
 
-		if (ah->intr_mitigation) {
+		if (ah->config.intr_mitigation) {
 			if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
 				*masked |= ATH9K_INT_RX;
 		}
@@ -3000,6 +2989,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 					"received PCI PERR interrupt\n");
 			}
+			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
 			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
@@ -3061,7 +3051,7 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
 	}
 	if (ints & ATH9K_INT_RX) {
 		mask |= AR_IMR_RXERR;
-		if (ah->intr_mitigation)
+		if (ah->config.intr_mitigation)
 			mask |= AR_IMR_RXMINTR | AR_IMR_RXINTM;
 		else
 			mask |= AR_IMR_RXOK | AR_IMR_RXDESC;
@@ -3259,7 +3249,7 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 /* HW Capabilities */
 /*******************/
 
-bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
+void ath9k_hw_fill_cap_info(struct ath_hw *ah)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	u16 capField = 0, eeval;
@@ -3343,8 +3333,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	pCap->hw_caps |= ATH9K_HW_CAP_MIC_TKIP;
 	pCap->hw_caps |= ATH9K_HW_CAP_MIC_AESCCM;
 
-	pCap->hw_caps |= ATH9K_HW_CAP_CHAN_SPREAD;
-
 	if (ah->config.ht_enable)
 		pCap->hw_caps |= ATH9K_HW_CAP_HT;
 	else
@@ -3368,7 +3356,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		pCap->keycache_size = AR_KEYTABLE_SIZE;
 
 	pCap->hw_caps |= ATH9K_HW_CAP_FASTCC;
-	pCap->num_mr_retries = 4;
 	pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
 
 	if (AR_SREV_9285_10_OR_LATER(ah))
@@ -3378,14 +3365,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	else
 		pCap->num_gpio_pins = AR_NUM_GPIO;
 
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		pCap->hw_caps |= ATH9K_HW_CAP_WOW;
-		pCap->hw_caps |= ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
-	} else {
-		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW;
-		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
-	}
-
 	if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) {
 		pCap->hw_caps |= ATH9K_HW_CAP_CST;
 		pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
@@ -3411,7 +3390,8 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	    (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) ||
 	    (ah->hw_version.macVersion == AR_SREV_VERSION_9160) ||
 	    (ah->hw_version.macVersion == AR_SREV_VERSION_9100) ||
-	    (ah->hw_version.macVersion == AR_SREV_VERSION_9280))
+	    (ah->hw_version.macVersion == AR_SREV_VERSION_9280) ||
+	    (ah->hw_version.macVersion == AR_SREV_VERSION_9285))
 		pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
 	else
 		pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
@@ -3445,8 +3425,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		ah->btactive_gpio = 6;
 		ah->wlanactive_gpio = 5;
 	}
-
-	return true;
 }
 
 bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
@@ -3754,22 +3732,19 @@ bool ath9k_hw_disable(struct ath_hw *ah)
 	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD);
 }
 
-bool ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
+void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
 {
 	struct ath9k_channel *chan = ah->curchan;
 	struct ieee80211_channel *channel = chan->chan;
 
 	ah->regulatory.power_limit = min(limit, (u32) MAX_RATE_POWER);
 
-	if (ah->eep_ops->set_txpower(ah, chan,
-			     ath9k_regd_get_ctl(ah, chan),
-			     channel->max_antenna_gain * 2,
-			     channel->max_power * 2,
-			     min((u32) MAX_RATE_POWER,
-				 (u32) ah->regulatory.power_limit)) != 0)
-		return false;
-
-	return true;
+	ah->eep_ops->set_txpower(ah, chan,
+				 ath9k_regd_get_ctl(&ah->regulatory, chan),
+				 channel->max_antenna_gain * 2,
+				 channel->max_power * 2,
+				 min((u32) MAX_RATE_POWER,
+				 (u32) ah->regulatory.power_limit));
 }
 
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac)
diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 0b594e0ee26..dd8508ef6e0 100644
--- a/drivers/net/wireless/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -25,10 +25,11 @@
 #include "ani.h"
 #include "eeprom.h"
 #include "calib.h"
-#include "regd.h"
 #include "reg.h"
 #include "phy.h"
 
+#include "../regd.h"
+
 #define ATHEROS_VENDOR_ID	0x168c
 #define AR5416_DEVID_PCI	0x0023
 #define AR5416_DEVID_PCIE	0x0024
@@ -124,29 +125,24 @@ enum wireless_mode {
 };
 
 enum ath9k_hw_caps {
-	ATH9K_HW_CAP_CHAN_SPREAD		= BIT(0),
-	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(1),
-	ATH9K_HW_CAP_MIC_CKIP                   = BIT(2),
-	ATH9K_HW_CAP_MIC_TKIP                   = BIT(3),
-	ATH9K_HW_CAP_CIPHER_AESCCM              = BIT(4),
-	ATH9K_HW_CAP_CIPHER_CKIP                = BIT(5),
-	ATH9K_HW_CAP_CIPHER_TKIP                = BIT(6),
-	ATH9K_HW_CAP_VEOL                       = BIT(7),
-	ATH9K_HW_CAP_BSSIDMASK                  = BIT(8),
-	ATH9K_HW_CAP_MCAST_KEYSEARCH            = BIT(9),
-	ATH9K_HW_CAP_CHAN_HALFRATE              = BIT(10),
-	ATH9K_HW_CAP_CHAN_QUARTERRATE           = BIT(11),
-	ATH9K_HW_CAP_HT                         = BIT(12),
-	ATH9K_HW_CAP_GTT                        = BIT(13),
-	ATH9K_HW_CAP_FASTCC                     = BIT(14),
-	ATH9K_HW_CAP_RFSILENT                   = BIT(15),
-	ATH9K_HW_CAP_WOW                        = BIT(16),
-	ATH9K_HW_CAP_CST                        = BIT(17),
-	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(18),
-	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(19),
-	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(20),
-	ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT     = BIT(21),
-	ATH9K_HW_CAP_BT_COEX			= BIT(22)
+	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(0),
+	ATH9K_HW_CAP_MIC_CKIP                   = BIT(1),
+	ATH9K_HW_CAP_MIC_TKIP                   = BIT(2),
+	ATH9K_HW_CAP_CIPHER_AESCCM              = BIT(3),
+	ATH9K_HW_CAP_CIPHER_CKIP                = BIT(4),
+	ATH9K_HW_CAP_CIPHER_TKIP                = BIT(5),
+	ATH9K_HW_CAP_VEOL                       = BIT(6),
+	ATH9K_HW_CAP_BSSIDMASK                  = BIT(7),
+	ATH9K_HW_CAP_MCAST_KEYSEARCH            = BIT(8),
+	ATH9K_HW_CAP_HT                         = BIT(9),
+	ATH9K_HW_CAP_GTT                        = BIT(10),
+	ATH9K_HW_CAP_FASTCC                     = BIT(11),
+	ATH9K_HW_CAP_RFSILENT                   = BIT(12),
+	ATH9K_HW_CAP_CST                        = BIT(13),
+	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(14),
+	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(15),
+	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(16),
+	ATH9K_HW_CAP_BT_COEX			= BIT(17)
 };
 
 enum ath9k_capability_type {
@@ -166,7 +162,6 @@ struct ath9k_hw_capabilities {
 	u16 keycache_size;
 	u16 low_5ghz_chan, high_5ghz_chan;
 	u16 low_2ghz_chan, high_2ghz_chan;
-	u16 num_mr_retries;
 	u16 rts_aggr_limit;
 	u8 tx_chainmask;
 	u8 rx_chainmask;
@@ -184,11 +179,8 @@ struct ath9k_ops_config {
 	int ack_6mb;
 	int cwm_ignore_extcca;
 	u8 pcie_powersave_enable;
-	u8 pcie_l1skp_enable;
 	u8 pcie_clock_req;
 	u32 pcie_waen;
-	int pcie_power_reset;
-	u8 pcie_restore;
 	u8 analog_shiftreg;
 	u8 ht_enable;
 	u32 ofdm_trig_low;
@@ -196,17 +188,10 @@ struct ath9k_ops_config {
 	u32 cck_trig_high;
 	u32 cck_trig_low;
 	u32 enable_ani;
-	u8 noise_immunity_level;
-	u32 ofdm_weaksignal_det;
-	u32 cck_weaksignal_thr;
-	u8 spur_immunity_level;
-	u8 firstep_level;
-	int8_t rssi_thr_high;
-	int8_t rssi_thr_low;
 	u16 diversity_control;
 	u16 antenna_switch_swap;
 	int serialize_regmode;
-	int intr_mitigation;
+	bool intr_mitigation;
 #define SPUR_DISABLE        	0
 #define SPUR_ENABLE_IOCTL   	1
 #define SPUR_ENABLE_EEPROM  	2
@@ -281,13 +266,6 @@ enum ath9k_int {
 #define CHANNEL_HT40PLUS  0x20000
 #define CHANNEL_HT40MINUS 0x40000
 
-#define CHANNEL_INTERFERENCE    0x01
-#define CHANNEL_DFS             0x02
-#define CHANNEL_4MS_LIMIT       0x04
-#define CHANNEL_DFS_CLEAR       0x08
-#define CHANNEL_DISALLOW_ADHOC  0x10
-#define CHANNEL_PER_11D_ADHOC   0x20
-
 #define CHANNEL_A           (CHANNEL_5GHZ|CHANNEL_OFDM)
 #define CHANNEL_B           (CHANNEL_2GHZ|CHANNEL_CCK)
 #define CHANNEL_G           (CHANNEL_2GHZ|CHANNEL_OFDM)
@@ -318,10 +296,6 @@ struct ath9k_channel {
 	int16_t rawNoiseFloor;
 };
 
-#define IS_CHAN_A(_c) ((((_c)->channelFlags & CHANNEL_A) == CHANNEL_A) || \
-       (((_c)->channelFlags & CHANNEL_A_HT20) == CHANNEL_A_HT20) || \
-       (((_c)->channelFlags & CHANNEL_A_HT40PLUS) == CHANNEL_A_HT40PLUS) || \
-       (((_c)->channelFlags & CHANNEL_A_HT40MINUS) == CHANNEL_A_HT40MINUS))
 #define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \
        (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
        (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
@@ -329,7 +303,6 @@ struct ath9k_channel {
 #define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
 #define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
 #define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
-#define IS_CHAN_PASSIVE(_c) (((_c)->channelFlags & CHANNEL_PASSIVE) != 0)
 #define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
 #define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0)
 #define IS_CHAN_A_5MHZ_SPACED(_c)			\
@@ -420,7 +393,7 @@ struct ath_hw {
 	struct ath9k_hw_version hw_version;
 	struct ath9k_ops_config config;
 	struct ath9k_hw_capabilities caps;
-	struct ath9k_regulatory regulatory;
+	struct ath_regulatory regulatory;
 	struct ath9k_channel channels[38];
 	struct ath9k_channel *curchan;
 
@@ -463,14 +436,14 @@ struct ath_hw {
 	enum ath9k_ant_setting diversity_control;
 
 	/* Calibration */
-	enum hal_cal_types supp_cals;
-	struct hal_cal_list iq_caldata;
-	struct hal_cal_list adcgain_caldata;
-	struct hal_cal_list adcdc_calinitdata;
-	struct hal_cal_list adcdc_caldata;
-	struct hal_cal_list *cal_list;
-	struct hal_cal_list *cal_list_last;
-	struct hal_cal_list *cal_list_curr;
+	enum ath9k_cal_types supp_cals;
+	struct ath9k_cal_list iq_caldata;
+	struct ath9k_cal_list adcgain_caldata;
+	struct ath9k_cal_list adcdc_calinitdata;
+	struct ath9k_cal_list adcdc_caldata;
+	struct ath9k_cal_list *cal_list;
+	struct ath9k_cal_list *cal_list_last;
+	struct ath9k_cal_list *cal_list_curr;
 #define totalPowerMeasI meas0.unsign
 #define totalPowerMeasQ meas1.unsign
 #define totalIqCorrMeas meas2.sign
@@ -540,7 +513,6 @@ struct ath_hw {
 	enum ath9k_ani_cmd ani_function;
 
 	u32 intr_txqs;
-	bool intr_mitigation;
 	enum ath9k_ht_extprotspacing extprotspacing;
 	u8 txchainmask;
 	u8 rxchainmask;
@@ -573,7 +545,7 @@ struct ath_hw *ath9k_hw_attach(u16 devid, struct ath_softc *sc, int *error);
 void ath9k_hw_rfdetach(struct ath_hw *ah);
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   bool bChannelChange);
-bool ath9k_hw_fill_cap_info(struct ath_hw *ah);
+void ath9k_hw_fill_cap_info(struct ath_hw *ah);
 bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
 			    u32 capability, u32 *result);
 bool ath9k_hw_setcapability(struct ath_hw *ah, enum ath9k_capability_type type,
@@ -608,7 +580,8 @@ bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
 u32 ath9k_hw_reverse_bits(u32 val, u32 n);
 bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high);
-u16 ath9k_hw_computetxtime(struct ath_hw *ah, struct ath_rate_table *rates,
+u16 ath9k_hw_computetxtime(struct ath_hw *ah,
+			   const struct ath_rate_table *rates,
 			   u32 frameLen, u16 rateix, bool shortPreamble);
 void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
@@ -617,7 +590,7 @@ u32 ath9k_hw_getrxfilter(struct ath_hw *ah);
 void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits);
 bool ath9k_hw_phy_disable(struct ath_hw *ah);
 bool ath9k_hw_disable(struct ath_hw *ah);
-bool ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit);
+void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit);
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac);
 void ath9k_hw_setopmode(struct ath_hw *ah);
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h
index e2f0a34b79a..e2f0a34b79a 100644
--- a/drivers/net/wireless/ath9k/initvals.h
+++ b/drivers/net/wireless/ath/ath9k/initvals.h
diff --git a/drivers/net/wireless/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index e0a6dee4583..8ae4ec21667 100644
--- a/drivers/net/wireless/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -49,7 +49,7 @@ bool ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp)
 
 bool ath9k_hw_txstart(struct ath_hw *ah, u32 q)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Enable TXE on queue: %u\n", q);
 
 	REG_WRITE(ah, AR_Q_TXE, 1 << q);
 
@@ -110,13 +110,15 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 	u32 wait_time = ATH9K_TX_STOP_DMA_TIMEOUT / ATH9K_TIME_QUANTUM;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -146,7 +148,7 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 				break;
 
 			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"TSF have moved while trying to set "
+				"TSF has moved while trying to set "
 				"quiet time TSF: 0x%08x\n", tsfLow);
 		}
 
@@ -158,8 +160,8 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 		wait = wait_time;
 		while (ath9k_hw_numtxpending(ah, q)) {
 			if ((--wait) == 0) {
-				DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
-					"Failed to stop Tx DMA in 100 "
+				DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+					"Failed to stop TX DMA in 100 "
 					"msec after killing last frame\n");
 				break;
 			}
@@ -454,17 +456,19 @@ bool ath9k_hw_set_txq_props(struct ath_hw *ah, int q,
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "queue %p\n", qi);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
 
 	qi->tqi_ver = qinfo->tqi_ver;
 	qi->tqi_subtype = qinfo->tqi_subtype;
@@ -521,13 +525,15 @@ bool ath9k_hw_get_txq_props(struct ath_hw *ah, int q,
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -575,22 +581,23 @@ int ath9k_hw_setuptxqueue(struct ath_hw *ah, enum ath9k_tx_queue type,
 			    ATH9K_TX_QUEUE_INACTIVE)
 				break;
 		if (q == pCap->total_queues) {
-			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"no available tx queue\n");
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				"No available TX queue\n");
 			return -1;
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "bad tx queue type %u\n", type);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Invalid TX queue type: %u\n",
+			type);
 		return -1;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-			"tx queue %u already active\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"TX queue: %u already active\n", q);
 		return -1;
 	}
 	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
@@ -620,16 +627,18 @@ bool ath9k_hw_releasetxqueue(struct ath_hw *ah, u32 q)
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "release queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
 
 	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
 	ah->txok_interrupt_mask &= ~(1 << q);
@@ -650,17 +659,19 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 	u32 cwMin, chanCwMin, value;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
+			"inactive queue: %u\n", q);
 		return true;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "reset queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
 
 	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
 		if (chan && IS_CHAN_B(chan))
@@ -894,7 +905,7 @@ bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
 
 			reg = REG_READ(ah, AR_OBS_BUS_1);
 			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"rx failed to go idle in 10 ms RXSM=0x%x\n", reg);
+				"RX failed to go idle in 10 ms RXSM=0x%x\n", reg);
 
 			return false;
 		}
@@ -949,8 +960,8 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
 	}
 
 	if (i == 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-			"dma failed to stop in %d ms "
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"DMA failed to stop in %d ms "
 			"AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
 			AH_RX_STOP_DMA_TIMEOUT / 1000,
 			REG_READ(ah, AR_CR),
diff --git a/drivers/net/wireless/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 1176bce8b76..1176bce8b76 100644
--- a/drivers/net/wireless/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 13d4e6756c9..f7baa406918 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -35,14 +35,14 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 #define CHAN2G(_freq, _idx)  { \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
-	.max_power = 30, \
+	.max_power = 20, \
 }
 
 #define CHAN5G(_freq, _idx) { \
 	.band = IEEE80211_BAND_5GHZ, \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
-	.max_power = 30, \
+	.max_power = 20, \
 }
 
 /* Some 2 GHz radios are actually tunable on 2312-2732
@@ -189,7 +189,7 @@ static u8 parse_mpdudensity(u8 mpdudensity)
 
 static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
 {
-	struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table = NULL;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_rate *rate;
 	int i, maxrates;
@@ -280,14 +280,13 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to reset channel (%u Mhz) "
-			"reset status %u\n",
+			"reset status %d\n",
 			channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
 		return r;
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
-	sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
 	sc->sc_flags &= ~SC_OP_FULL_RESET;
 
 	if (ath_startrecv(sc) != 0) {
@@ -330,6 +329,12 @@ static void ath_ani_calibrate(unsigned long data)
 	if (sc->sc_flags & SC_OP_SCANNING)
 		goto set_timer;
 
+	/* Only calibrate if awake */
+	if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
+		goto set_timer;
+
+	ath9k_ps_wakeup(sc);
+
 	/* Long calibration runs independently of short calibration. */
 	if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
 		longcal = true;
@@ -368,31 +373,21 @@ static void ath_ani_calibrate(unsigned long data)
 
 		/* Perform calibration if necessary */
 		if (longcal || shortcal) {
-			bool iscaldone = false;
-
-			if (ath9k_hw_calibrate(ah, ah->curchan,
-					       sc->rx_chainmask, longcal,
-					       &iscaldone)) {
-				if (longcal)
-					sc->ani.noise_floor =
-						ath9k_hw_getchan_noise(ah,
-							       ah->curchan);
-
-				DPRINTF(sc, ATH_DBG_ANI,
-					"calibrate chan %u/%x nf: %d\n",
-					ah->curchan->channel,
-					ah->curchan->channelFlags,
-					sc->ani.noise_floor);
-			} else {
-				DPRINTF(sc, ATH_DBG_ANY,
-					"calibrate chan %u/%x failed\n",
-					ah->curchan->channel,
-					ah->curchan->channelFlags);
-			}
-			sc->ani.caldone = iscaldone;
+			sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan,
+						     sc->rx_chainmask, longcal);
+
+			if (longcal)
+				sc->ani.noise_floor = ath9k_hw_getchan_noise(ah,
+								     ah->curchan);
+
+			DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n",
+				ah->curchan->channel, ah->curchan->channelFlags,
+				sc->ani.noise_floor);
 		}
 	}
 
+	ath9k_ps_restore(sc);
+
 set_timer:
 	/*
 	* Set timer interval based on previous results.
@@ -408,6 +403,18 @@ set_timer:
 	mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 }
 
+static void ath_start_ani(struct ath_softc *sc)
+{
+	unsigned long timestamp = jiffies_to_msecs(jiffies);
+
+	sc->ani.longcal_timer = timestamp;
+	sc->ani.shortcal_timer = timestamp;
+	sc->ani.checkani_timer = timestamp;
+
+	mod_timer(&sc->ani.timer,
+		  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
+}
+
 /*
  * Update tx/rx chainmask. For legacy association,
  * hard code chainmask to 1x1, for 11n association, use
@@ -416,7 +423,6 @@ set_timer:
  */
 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 {
-	sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
 	if (is_ht ||
 	    (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
 		sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
@@ -436,12 +442,12 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 
 	an = (struct ath_node *)sta->drv_priv;
 
-	if (sc->sc_flags & SC_OP_TXAGGR)
+	if (sc->sc_flags & SC_OP_TXAGGR) {
 		ath_tx_node_init(sc, an);
-
-	an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
-			     sta->ht_cap.ampdu_factor);
-	an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+		an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+				     sta->ht_cap.ampdu_factor);
+		an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+	}
 }
 
 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
@@ -457,133 +463,130 @@ static void ath9k_tasklet(unsigned long data)
 	struct ath_softc *sc = (struct ath_softc *)data;
 	u32 status = sc->intrstatus;
 
+	ath9k_ps_wakeup(sc);
+
 	if (status & ATH9K_INT_FATAL) {
-		/* need a chip reset */
 		ath_reset(sc, false);
+		ath9k_ps_restore(sc);
 		return;
-	} else {
+	}
 
-		if (status &
-		    (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
-			spin_lock_bh(&sc->rx.rxflushlock);
-			ath_rx_tasklet(sc, 0);
-			spin_unlock_bh(&sc->rx.rxflushlock);
-		}
-		/* XXX: optimize this */
-		if (status & ATH9K_INT_TX)
-			ath_tx_tasklet(sc);
+	if (status & (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
+		spin_lock_bh(&sc->rx.rxflushlock);
+		ath_rx_tasklet(sc, 0);
+		spin_unlock_bh(&sc->rx.rxflushlock);
+	}
+
+	if (status & ATH9K_INT_TX)
+		ath_tx_tasklet(sc);
+
+	if ((status & ATH9K_INT_TSFOOR) &&
+	    (sc->hw->conf.flags & IEEE80211_CONF_PS)) {
+		/*
+		 * TSF sync does not look correct; remain awake to sync with
+		 * the next Beacon.
+		 */
+		DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n");
+		sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
 	}
 
 	/* re-enable hardware interrupt */
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+	ath9k_ps_restore(sc);
 }
 
 irqreturn_t ath_isr(int irq, void *dev)
 {
+#define SCHED_INTR (				\
+		ATH9K_INT_FATAL |		\
+		ATH9K_INT_RXORN |		\
+		ATH9K_INT_RXEOL |		\
+		ATH9K_INT_RX |			\
+		ATH9K_INT_TX |			\
+		ATH9K_INT_BMISS |		\
+		ATH9K_INT_CST |			\
+		ATH9K_INT_TSFOOR)
+
 	struct ath_softc *sc = dev;
 	struct ath_hw *ah = sc->sc_ah;
 	enum ath9k_int status;
 	bool sched = false;
 
-	do {
-		if (sc->sc_flags & SC_OP_INVALID) {
-			/*
-			 * The hardware is not ready/present, don't
-			 * touch anything. Note this can happen early
-			 * on if the IRQ is shared.
-			 */
-			return IRQ_NONE;
-		}
-		if (!ath9k_hw_intrpend(ah)) {	/* shared irq, not for us */
-			return IRQ_NONE;
-		}
+	/*
+	 * The hardware is not ready/present, don't
+	 * touch anything. Note this can happen early
+	 * on if the IRQ is shared.
+	 */
+	if (sc->sc_flags & SC_OP_INVALID)
+		return IRQ_NONE;
 
-		/*
-		 * Figure out the reason(s) for the interrupt.  Note
-		 * that the hal returns a pseudo-ISR that may include
-		 * bits we haven't explicitly enabled so we mask the
-		 * value to insure we only process bits we requested.
-		 */
-		ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
 
-		status &= sc->imask;	/* discard unasked-for bits */
+	/* shared irq, not for us */
 
-		/*
-		 * If there are no status bits set, then this interrupt was not
-		 * for me (should have been caught above).
-		 */
-		if (!status)
-			return IRQ_NONE;
+	if (!ath9k_hw_intrpend(ah))
+		return IRQ_NONE;
 
-		sc->intrstatus = status;
-		ath9k_ps_wakeup(sc);
+	/*
+	 * Figure out the reason(s) for the interrupt.  Note
+	 * that the hal returns a pseudo-ISR that may include
+	 * bits we haven't explicitly enabled so we mask the
+	 * value to insure we only process bits we requested.
+	 */
+	ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
+	status &= sc->imask;	/* discard unasked-for bits */
 
-		if (status & ATH9K_INT_FATAL) {
-			/* need a chip reset */
-			sched = true;
-		} else if (status & ATH9K_INT_RXORN) {
-			/* need a chip reset */
-			sched = true;
-		} else {
-			if (status & ATH9K_INT_SWBA) {
-				/* schedule a tasklet for beacon handling */
-				tasklet_schedule(&sc->bcon_tasklet);
-			}
-			if (status & ATH9K_INT_RXEOL) {
-				/*
-				 * NB: the hardware should re-read the link when
-				 *     RXE bit is written, but it doesn't work
-				 *     at least on older hardware revs.
-				 */
-				sched = true;
-			}
+	/*
+	 * If there are no status bits set, then this interrupt was not
+	 * for me (should have been caught above).
+	 */
+	if (!status)
+		return IRQ_NONE;
 
-			if (status & ATH9K_INT_TXURN)
-				/* bump tx trigger level */
-				ath9k_hw_updatetxtriglevel(ah, true);
-			/* XXX: optimize this */
-			if (status & ATH9K_INT_RX)
-				sched = true;
-			if (status & ATH9K_INT_TX)
-				sched = true;
-			if (status & ATH9K_INT_BMISS)
-				sched = true;
-			/* carrier sense timeout */
-			if (status & ATH9K_INT_CST)
-				sched = true;
-			if (status & ATH9K_INT_MIB) {
-				/*
-				 * Disable interrupts until we service the MIB
-				 * interrupt; otherwise it will continue to
-				 * fire.
-				 */
-				ath9k_hw_set_interrupts(ah, 0);
-				/*
-				 * Let the hal handle the event. We assume
-				 * it will clear whatever condition caused
-				 * the interrupt.
-				 */
-				ath9k_hw_procmibevent(ah, &sc->nodestats);
-				ath9k_hw_set_interrupts(ah, sc->imask);
-			}
-			if (status & ATH9K_INT_TIM_TIMER) {
-				if (!(ah->caps.hw_caps &
-				      ATH9K_HW_CAP_AUTOSLEEP)) {
-					/* Clear RxAbort bit so that we can
-					 * receive frames */
-					ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
-					ath9k_hw_setrxabort(ah, 0);
-					sched = true;
-					sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
-				}
-			}
-			if (status & ATH9K_INT_TSFOOR) {
-				/* FIXME: Handle this interrupt for power save */
-				sched = true;
-			}
+	/* Cache the status */
+	sc->intrstatus = status;
+
+	if (status & SCHED_INTR)
+		sched = true;
+
+	/*
+	 * If a FATAL or RXORN interrupt is received, we have to reset the
+	 * chip immediately.
+	 */
+	if (status & (ATH9K_INT_FATAL | ATH9K_INT_RXORN))
+		goto chip_reset;
+
+	if (status & ATH9K_INT_SWBA)
+		tasklet_schedule(&sc->bcon_tasklet);
+
+	if (status & ATH9K_INT_TXURN)
+		ath9k_hw_updatetxtriglevel(ah, true);
+
+	if (status & ATH9K_INT_MIB) {
+		/*
+		 * Disable interrupts until we service the MIB
+		 * interrupt; otherwise it will continue to
+		 * fire.
+		 */
+		ath9k_hw_set_interrupts(ah, 0);
+		/*
+		 * Let the hal handle the event. We assume
+		 * it will clear whatever condition caused
+		 * the interrupt.
+		 */
+		ath9k_hw_procmibevent(ah, &sc->nodestats);
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+
+	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+		if (status & ATH9K_INT_TIM_TIMER) {
+			/* Clear RxAbort bit so that we can
+			 * receive frames */
+			ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
+			ath9k_hw_setrxabort(sc->sc_ah, 0);
+			sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
 		}
-		ath9k_ps_restore(sc);
-	} while (0);
+
+chip_reset:
 
 	ath_debug_stat_interrupt(sc, status);
 
@@ -594,6 +597,8 @@ irqreturn_t ath_isr(int irq, void *dev)
 	}
 
 	return IRQ_HANDLED;
+
+#undef SCHED_INTR
 }
 
 static u32 ath_get_extchanmode(struct ath_softc *sc,
@@ -676,7 +681,7 @@ static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
 	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
 	if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
 		/* TX MIC entry failed. No need to proceed further */
-		DPRINTF(sc, ATH_DBG_KEYCACHE,
+		DPRINTF(sc, ATH_DBG_FATAL,
 			"Setting TX MIC Key Failed\n");
 		return 0;
 	}
@@ -909,6 +914,13 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		if (avp->av_opmode == NL80211_IFTYPE_STATION) {
 			sc->curaid = bss_conf->aid;
 			ath9k_hw_write_associd(sc);
+
+			/*
+			 * Request a re-configuration of Beacon related timers
+			 * on the receipt of the first Beacon frame (i.e.,
+			 * after time sync with the AP).
+			 */
+			sc->sc_flags |= SC_OP_BEACON_SYNC;
 		}
 
 		/* Configure the beacon */
@@ -920,11 +932,9 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
 		sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
 
-		/* Start ANI */
-		mod_timer(&sc->ani.timer,
-			  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
+		ath_start_ani(sc);
 	} else {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISSOC\n");
+		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 		sc->curaid = 0;
 	}
 }
@@ -1098,14 +1108,14 @@ void ath_radio_enable(struct ath_softc *sc)
 	int r;
 
 	ath9k_ps_wakeup(sc);
-	spin_lock_bh(&sc->sc_resetlock);
+	ath9k_hw_configpcipowersave(ah, 0);
 
+	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
-
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to reset channel %u (%uMhz) ",
-			"reset status %u\n",
+			"reset status %d\n",
 			channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
@@ -1157,12 +1167,13 @@ void ath_radio_disable(struct ath_softc *sc)
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to reset channel %u (%uMhz) "
-			"reset status %u\n",
+			"reset status %d\n",
 			channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
+	ath9k_hw_configpcipowersave(ah, 1);
 	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 	ath9k_ps_restore(sc);
 }
@@ -1181,121 +1192,69 @@ static bool ath_is_rfkill_set(struct ath_softc *sc)
 				  ah->rfkill_polarity;
 }
 
-/* h/w rfkill poll function */
-static void ath_rfkill_poll(struct work_struct *work)
+/* s/w rfkill handlers */
+static int ath_rfkill_set_block(void *data, bool blocked)
 {
-	struct ath_softc *sc = container_of(work, struct ath_softc,
-					    rf_kill.rfkill_poll.work);
-	bool radio_on;
-
-	if (sc->sc_flags & SC_OP_INVALID)
-		return;
-
-	radio_on = !ath_is_rfkill_set(sc);
-
-	/*
-	 * enable/disable radio only when there is a
-	 * state change in RF switch
-	 */
-	if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) {
-		enum rfkill_state state;
-
-		if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) {
-			state = radio_on ? RFKILL_STATE_SOFT_BLOCKED
-				: RFKILL_STATE_HARD_BLOCKED;
-		} else if (radio_on) {
-			ath_radio_enable(sc);
-			state = RFKILL_STATE_UNBLOCKED;
-		} else {
-			ath_radio_disable(sc);
-			state = RFKILL_STATE_HARD_BLOCKED;
-		}
-
-		if (state == RFKILL_STATE_HARD_BLOCKED)
-			sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED;
-		else
-			sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED;
+	struct ath_softc *sc = data;
 
-		rfkill_force_state(sc->rf_kill.rfkill, state);
-	}
+	if (blocked)
+		ath_radio_disable(sc);
+	else
+		ath_radio_enable(sc);
 
-	queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll,
-			   msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL));
+	return 0;
 }
 
-/* s/w rfkill handler */
-static int ath_sw_toggle_radio(void *data, enum rfkill_state state)
+static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data)
 {
 	struct ath_softc *sc = data;
+	bool blocked = !!ath_is_rfkill_set(sc);
 
-	switch (state) {
-	case RFKILL_STATE_SOFT_BLOCKED:
-		if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED |
-		    SC_OP_RFKILL_SW_BLOCKED)))
-			ath_radio_disable(sc);
-		sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED;
-		return 0;
-	case RFKILL_STATE_UNBLOCKED:
-		if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) {
-			sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED;
-			if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) {
-				DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the"
-					"radio as it is disabled by h/w\n");
-				return -EPERM;
-			}
-			ath_radio_enable(sc);
-		}
-		return 0;
-	default:
-		return -EINVAL;
-	}
+	if (rfkill_set_hw_state(rfkill, blocked))
+		ath_radio_disable(sc);
+	else
+		ath_radio_enable(sc);
 }
 
 /* Init s/w rfkill */
 static int ath_init_sw_rfkill(struct ath_softc *sc)
 {
-	sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy),
-					     RFKILL_TYPE_WLAN);
+	sc->rf_kill.ops.set_block = ath_rfkill_set_block;
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+		sc->rf_kill.ops.poll = ath_rfkill_poll_state;
+
+	snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
+		"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
+
+	sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name,
+					  wiphy_dev(sc->hw->wiphy),
+					  RFKILL_TYPE_WLAN,
+					  &sc->rf_kill.ops, sc);
 	if (!sc->rf_kill.rfkill) {
 		DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
 		return -ENOMEM;
 	}
 
-	snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
-		"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
-	sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name;
-	sc->rf_kill.rfkill->data = sc;
-	sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio;
-	sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED;
-	sc->rf_kill.rfkill->user_claim_unsupported = 1;
-
 	return 0;
 }
 
 /* Deinitialize rfkill */
 static void ath_deinit_rfkill(struct ath_softc *sc)
 {
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-
 	if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
 		rfkill_unregister(sc->rf_kill.rfkill);
+		rfkill_destroy(sc->rf_kill.rfkill);
 		sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
-		sc->rf_kill.rfkill = NULL;
 	}
 }
 
 static int ath_start_rfkill_poll(struct ath_softc *sc)
 {
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		queue_delayed_work(sc->hw->workqueue,
-				   &sc->rf_kill.rfkill_poll, 0);
-
 	if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
 		if (rfkill_register(sc->rf_kill.rfkill)) {
 			DPRINTF(sc, ATH_DBG_FATAL,
 				"Unable to register rfkill\n");
-			rfkill_free(sc->rf_kill.rfkill);
+			rfkill_destroy(sc->rf_kill.rfkill);
 
 			/* Deinitialize the device */
 			ath_cleanup(sc);
@@ -1362,6 +1321,17 @@ void ath_detach(struct ath_softc *sc)
 	ath9k_ps_restore(sc);
 }
 
+static int ath9k_reg_notifier(struct wiphy *wiphy,
+			      struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_regulatory *reg = &sc->sc_ah->regulatory;
+
+	return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
 static int ath_init(u16 devid, struct ath_softc *sc)
 {
 	struct ath_hw *ah = NULL;
@@ -1403,7 +1373,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 	/* Get the hardware key cache size. */
 	sc->keymax = ah->caps.keycache_size;
 	if (sc->keymax > ATH_KEYMAX) {
-		DPRINTF(sc, ATH_DBG_KEYCACHE,
+		DPRINTF(sc, ATH_DBG_ANY,
 			"Warning, using only %u entries in %u key cache\n",
 			ATH_KEYMAX, sc->keymax);
 		sc->keymax = ATH_KEYMAX;
@@ -1416,7 +1386,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 	for (i = 0; i < sc->keymax; i++)
 		ath9k_hw_keyreset(ah, (u16) i);
 
-	if (ath9k_regd_init(sc->sc_ah))
+	if (error)
 		goto bad;
 
 	/* default to MONITOR mode */
@@ -1545,9 +1515,6 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 		sc->beacon.bslot_aphy[i] = NULL;
 	}
 
-	/* save MISC configurations */
-	sc->config.swBeaconProcess = 1;
-
 	/* setup channels and rates */
 
 	sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
@@ -1602,9 +1569,6 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
-	hw->wiphy->reg_notifier = ath9k_reg_notifier;
-	hw->wiphy->strict_regulatory = true;
-
 	hw->queues = 4;
 	hw->max_rates = 4;
 	hw->channel_change_time = 5000;
@@ -1625,8 +1589,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 int ath_attach(u16 devid, struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
-	const struct ieee80211_regdomain *regd;
 	int error = 0, i;
+	struct ath_regulatory *reg;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
 
@@ -1640,6 +1604,13 @@ int ath_attach(u16 devid, struct ath_softc *sc)
 
 	ath_set_hw_capab(sc, hw);
 
+	error = ath_regd_init(&sc->sc_ah->regulatory, sc->hw->wiphy,
+			      ath9k_reg_notifier);
+	if (error)
+		return error;
+
+	reg = &sc->sc_ah->regulatory;
+
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
 		if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
@@ -1656,41 +1627,20 @@ int ath_attach(u16 devid, struct ath_softc *sc)
 		goto error_attach;
 
 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	/* Initialze h/w Rfkill */
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
-
 	/* Initialize s/w rfkill */
 	error = ath_init_sw_rfkill(sc);
 	if (error)
 		goto error_attach;
 #endif
 
-	if (ath9k_is_world_regd(sc->sc_ah)) {
-		/* Anything applied here (prior to wiphy registration) gets
-		 * saved on the wiphy orig_* parameters */
-		regd = ath9k_world_regdomain(sc->sc_ah);
-		hw->wiphy->custom_regulatory = true;
-		hw->wiphy->strict_regulatory = false;
-	} else {
-		/* This gets applied in the case of the absense of CRDA,
-		 * it's our own custom world regulatory domain, similar to
-		 * cfg80211's but we enable passive scanning */
-		regd = ath9k_default_world_regdomain();
-	}
-	wiphy_apply_custom_regulatory(hw->wiphy, regd);
-	ath9k_reg_apply_radar_flags(hw->wiphy);
-	ath9k_reg_apply_world_flags(hw->wiphy, NL80211_REGDOM_SET_BY_DRIVER);
-
 	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
 	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
 	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
 
 	error = ieee80211_register_hw(hw);
 
-	if (!ath9k_is_world_regd(sc->sc_ah)) {
-		error = regulatory_hint(hw->wiphy,
-			sc->sc_ah->regulatory.alpha2);
+	if (!ath_is_world_regd(reg)) {
+		error = regulatory_hint(hw->wiphy, reg->alpha2);
 		if (error)
 			goto error_attach;
 	}
@@ -1728,7 +1678,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
 	if (r)
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %u\n", r);
+			"Unable to reset hardware; reset status %d\n", r);
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0)
@@ -1792,7 +1742,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 		goto fail;
 	}
 
-	dd->dd_name = name;
 	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
 
 	/*
@@ -1822,7 +1771,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 	}
 	ds = dd->dd_desc;
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		dd->dd_name, ds, (u32) dd->dd_desc_len,
+		name, ds, (u32) dd->dd_desc_len,
 		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
 
 	/* allocate buffers */
@@ -2021,7 +1970,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %u "
+			"Unable to reset hardware; reset status %d "
 			"(freq %u MHz)\n", r,
 			curchan->center_freq);
 		spin_unlock_bh(&sc->sc_resetlock);
@@ -2043,8 +1992,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 * here except setup the interrupt mask.
 	 */
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to start recv logic\n");
+		DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
 		r = -EIO;
 		goto mutex_unlock;
 	}
@@ -2095,6 +2043,46 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 		goto exit;
 	}
 
+	if (sc->hw->conf.flags & IEEE80211_CONF_PS) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		/*
+		 * mac80211 does not set PM field for normal data frames, so we
+		 * need to update that based on the current PS mode.
+		 */
+		if (ieee80211_is_data(hdr->frame_control) &&
+		    !ieee80211_is_nullfunc(hdr->frame_control) &&
+		    !ieee80211_has_pm(hdr->frame_control)) {
+			DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame "
+				"while in PS mode\n");
+			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+		}
+	}
+
+	if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
+		/*
+		 * We are using PS-Poll and mac80211 can request TX while in
+		 * power save mode. Need to wake up hardware for the TX to be
+		 * completed and if needed, also for RX of buffered frames.
+		 */
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		ath9k_ps_wakeup(sc);
+		ath9k_hw_setrxabort(sc->sc_ah, 0);
+		if (ieee80211_is_pspoll(hdr->frame_control)) {
+			DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a "
+				"buffered frame\n");
+			sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
+		} else {
+			DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n");
+			sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
+		}
+		/*
+		 * The actual restore operation will happen only after
+		 * the sc_flags bit is cleared. We are just dropping
+		 * the ps_usecount here.
+		 */
+		ath9k_ps_restore(sc);
+	}
+
 	memset(&txctl, 0, sizeof(struct ath_tx_control));
 
 	/*
@@ -2171,10 +2159,8 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	} else
 		sc->rx.rxlink = NULL;
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
+	rfkill_pause_polling(sc->rf_kill.rfkill);
+
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(sc->sc_ah);
 	ath9k_hw_configpcipowersave(sc->sc_ah, 1);
@@ -2257,25 +2243,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		sc->imask |= ATH9K_INT_TSFOOR;
 	}
 
-	/*
-	 * Some hardware processes the TIM IE and fires an
-	 * interrupt when the TIM bit is set.  For hardware
-	 * that does, if not overridden by configuration,
-	 * enable the TIM interrupt when operating as station.
-	 */
-	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
-	    (conf->type == NL80211_IFTYPE_STATION) &&
-	    !sc->config.swBeaconProcess)
-		sc->imask |= ATH9K_INT_TIM;
-
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-	if (conf->type == NL80211_IFTYPE_AP) {
-		/* TODO: is this a suitable place to start ANI for AP mode? */
-		/* Start ANI */
-		mod_timer(&sc->ani.timer,
-			  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
-	}
+	if (conf->type == NL80211_IFTYPE_AP)
+		ath_start_ani(sc);
 
 out:
 	mutex_unlock(&sc->mutex);
@@ -2326,26 +2297,36 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ieee80211_conf *conf = &hw->conf;
+	struct ath_hw *ah = sc->sc_ah;
 
 	mutex_lock(&sc->mutex);
 
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
-			if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
-				sc->imask |= ATH9K_INT_TIM_TIMER;
-				ath9k_hw_set_interrupts(sc->sc_ah,
-						sc->imask);
+			if (!(ah->caps.hw_caps &
+			      ATH9K_HW_CAP_AUTOSLEEP)) {
+				if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
+					sc->imask |= ATH9K_INT_TIM_TIMER;
+					ath9k_hw_set_interrupts(sc->sc_ah,
+							sc->imask);
+				}
+				ath9k_hw_setrxabort(sc->sc_ah, 1);
 			}
-			ath9k_hw_setrxabort(sc->sc_ah, 1);
 			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 		} else {
 			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
-			ath9k_hw_setrxabort(sc->sc_ah, 0);
-			sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
-			if (sc->imask & ATH9K_INT_TIM_TIMER) {
-				sc->imask &= ~ATH9K_INT_TIM_TIMER;
-				ath9k_hw_set_interrupts(sc->sc_ah,
-						sc->imask);
+			if (!(ah->caps.hw_caps &
+			      ATH9K_HW_CAP_AUTOSLEEP)) {
+				ath9k_hw_setrxabort(sc->sc_ah, 0);
+				sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
+						  SC_OP_WAIT_FOR_CAB |
+						  SC_OP_WAIT_FOR_PSPOLL_DATA |
+						  SC_OP_WAIT_FOR_TX_ACK);
+				if (sc->imask & ATH9K_INT_TIM_TIMER) {
+					sc->imask &= ~ATH9K_INT_TIM_TIMER;
+					ath9k_hw_set_interrupts(sc->sc_ah,
+							sc->imask);
+				}
 			}
 		}
 	}
@@ -2387,114 +2368,6 @@ skip_chan_change:
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->config.txpowlimit = 2 * conf->power_level;
 
-	/*
-	 * The HW TSF has to be reset when the beacon interval changes.
-	 * We set the flag here, and ath_beacon_config_ap() would take this
-	 * into account when it gets called through the subsequent
-	 * config_interface() call - with IFCC_BEACON in the changed field.
-	 */
-
-	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		sc->sc_flags |= SC_OP_TSF_RESET;
-
-	mutex_unlock(&sc->mutex);
-
-	return 0;
-}
-
-static int ath9k_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				  struct ieee80211_if_conf *conf)
-{
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_vif *avp = (void *)vif->drv_priv;
-	u32 rfilt = 0;
-	int error, i;
-
-	mutex_lock(&sc->mutex);
-
-	/* TODO: Need to decide which hw opmode to use for multi-interface
-	 * cases */
-	if (vif->type == NL80211_IFTYPE_AP &&
-	    ah->opmode != NL80211_IFTYPE_AP) {
-		ah->opmode = NL80211_IFTYPE_STATION;
-		ath9k_hw_setopmode(ah);
-		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
-		sc->curaid = 0;
-		ath9k_hw_write_associd(sc);
-		/* Request full reset to get hw opmode changed properly */
-		sc->sc_flags |= SC_OP_FULL_RESET;
-	}
-
-	if ((conf->changed & IEEE80211_IFCC_BSSID) &&
-	    !is_zero_ether_addr(conf->bssid)) {
-		switch (vif->type) {
-		case NL80211_IFTYPE_STATION:
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_MESH_POINT:
-			/* Set BSSID */
-			memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
-			memcpy(avp->bssid, conf->bssid, ETH_ALEN);
-			sc->curaid = 0;
-			ath9k_hw_write_associd(sc);
-
-			/* Set aggregation protection mode parameters */
-			sc->config.ath_aggr_prot = 0;
-
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"RX filter 0x%x bssid %pM aid 0x%x\n",
-				rfilt, sc->curbssid, sc->curaid);
-
-			/* need to reconfigure the beacon */
-			sc->sc_flags &= ~SC_OP_BEACONS ;
-
-			break;
-		default:
-			break;
-		}
-	}
-
-	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
-	    (vif->type == NL80211_IFTYPE_AP) ||
-	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
-		if ((conf->changed & IEEE80211_IFCC_BEACON) ||
-		    (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
-		     conf->enable_beacon)) {
-			/*
-			 * Allocate and setup the beacon frame.
-			 *
-			 * Stop any previous beacon DMA.  This may be
-			 * necessary, for example, when an ibss merge
-			 * causes reconfiguration; we may be called
-			 * with beacon transmission active.
-			 */
-			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-
-			error = ath_beacon_alloc(aphy, vif);
-			if (error != 0) {
-				mutex_unlock(&sc->mutex);
-				return error;
-			}
-
-			ath_beacon_config(sc, vif);
-		}
-	}
-
-	/* Check for WLAN_CAPABILITY_PRIVACY ? */
-	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
-		for (i = 0; i < IEEE80211_WEP_NKID; i++)
-			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
-				ath9k_hw_keysetmac(sc->sc_ah,
-						   (u16)i,
-						   sc->curbssid);
-	}
-
-	/* Only legacy IBSS for now */
-	if (vif->type == NL80211_IFTYPE_ADHOC)
-		ath_update_chainmask(sc, 0);
-
 	mutex_unlock(&sc->mutex);
 
 	return 0;
@@ -2523,8 +2396,10 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw,
 	*total_flags &= SUPPORTED_FILTERS;
 
 	sc->rx.rxfilter = *total_flags;
+	ath9k_ps_wakeup(sc);
 	rfilt = ath_calcrxfilter(sc);
 	ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
+	ath9k_ps_restore(sc);
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
 }
@@ -2562,6 +2437,8 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 
 	mutex_lock(&sc->mutex);
 
+	memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
+
 	qi.tqi_aifs = params->aifs;
 	qi.tqi_cwmin = params->cw_min;
 	qi.tqi_cwmax = params->cw_max;
@@ -2598,7 +2475,7 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
 
 	mutex_lock(&sc->mutex);
 	ath9k_ps_wakeup(sc);
-	DPRINTF(sc, ATH_DBG_KEYCACHE, "Set HW Key\n");
+	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n");
 
 	switch (cmd) {
 	case SET_KEY:
@@ -2634,9 +2511,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_vif *avp = (void *)vif->drv_priv;
+	u32 rfilt = 0;
+	int error, i;
 
 	mutex_lock(&sc->mutex);
 
+	/*
+	 * TODO: Need to decide which hw opmode to use for
+	 *       multi-interface cases
+	 * XXX: This belongs into add_interface!
+	 */
+	if (vif->type == NL80211_IFTYPE_AP &&
+	    ah->opmode != NL80211_IFTYPE_AP) {
+		ah->opmode = NL80211_IFTYPE_STATION;
+		ath9k_hw_setopmode(ah);
+		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
+		sc->curaid = 0;
+		ath9k_hw_write_associd(sc);
+		/* Request full reset to get hw opmode changed properly */
+		sc->sc_flags |= SC_OP_FULL_RESET;
+	}
+
+	if ((changed & BSS_CHANGED_BSSID) &&
+	    !is_zero_ether_addr(bss_conf->bssid)) {
+		switch (vif->type) {
+		case NL80211_IFTYPE_STATION:
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_MESH_POINT:
+			/* Set BSSID */
+			memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
+			memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
+			sc->curaid = 0;
+			ath9k_hw_write_associd(sc);
+
+			/* Set aggregation protection mode parameters */
+			sc->config.ath_aggr_prot = 0;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"RX filter 0x%x bssid %pM aid 0x%x\n",
+				rfilt, sc->curbssid, sc->curaid);
+
+			/* need to reconfigure the beacon */
+			sc->sc_flags &= ~SC_OP_BEACONS ;
+
+			break;
+		default:
+			break;
+		}
+	}
+
+	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+	    (vif->type == NL80211_IFTYPE_AP) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
+		if ((changed & BSS_CHANGED_BEACON) ||
+		    (changed & BSS_CHANGED_BEACON_ENABLED &&
+		     bss_conf->enable_beacon)) {
+			/*
+			 * Allocate and setup the beacon frame.
+			 *
+			 * Stop any previous beacon DMA.  This may be
+			 * necessary, for example, when an ibss merge
+			 * causes reconfiguration; we may be called
+			 * with beacon transmission active.
+			 */
+			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+
+			error = ath_beacon_alloc(aphy, vif);
+			if (!error)
+				ath_beacon_config(sc, vif);
+		}
+	}
+
+	/* Check for WLAN_CAPABILITY_PRIVACY ? */
+	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
+		for (i = 0; i < IEEE80211_WEP_NKID; i++)
+			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+				ath9k_hw_keysetmac(sc->sc_ah,
+						   (u16)i,
+						   sc->curbssid);
+	}
+
+	/* Only legacy IBSS for now */
+	if (vif->type == NL80211_IFTYPE_ADHOC)
+		ath_update_chainmask(sc, 0);
+
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
 		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
 			bss_conf->use_short_preamble);
@@ -2662,6 +2622,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 		ath9k_bss_assoc_info(sc, vif, bss_conf);
 	}
 
+	/*
+	 * The HW TSF has to be reset when the beacon interval changes.
+	 * We set the flag here, and ath_beacon_config_ap() would take this
+	 * into account when it gets called through the subsequent
+	 * config_interface() call - with IFCC_BEACON in the changed field.
+	 */
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		sc->sc_flags |= SC_OP_TSF_RESET;
+		sc->beacon_interval = bss_conf->beacon_int;
+	}
+
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2771,6 +2743,7 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 	mutex_lock(&sc->mutex);
 	aphy->state = ATH_WIPHY_ACTIVE;
 	sc->sc_flags &= ~SC_OP_SCANNING;
+	sc->sc_flags |= SC_OP_FULL_RESET;
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2781,7 +2754,6 @@ struct ieee80211_ops ath9k_ops = {
 	.add_interface 	    = ath9k_add_interface,
 	.remove_interface   = ath9k_remove_interface,
 	.config 	    = ath9k_config,
-	.config_interface   = ath9k_config_interface,
 	.configure_filter   = ath9k_configure_filter,
 	.sta_notify         = ath9k_sta_notify,
 	.conf_tx 	    = ath9k_conf_tx,
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 168411d322a..ccdf20a2e9b 100644
--- a/drivers/net/wireless/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -227,11 +227,6 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
-
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -256,16 +251,6 @@ static int ath_pci_resume(struct pci_dev *pdev)
 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	/*
-	 * check the h/w rfkill state on resume
-	 * and start the rfkill poll timer
-	 */
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		queue_delayed_work(sc->hw->workqueue,
-				   &sc->rf_kill.rfkill_poll, 0);
-#endif
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c
index 8bcba906929..aaa941561c3 100644
--- a/drivers/net/wireless/ath9k/phy.c
+++ b/drivers/net/wireless/ath/ath9k/phy.c
@@ -46,7 +46,7 @@ ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 			channelSel = ((freq - 704) * 2 - 3040) / 10;
 			bModeSynth = 1;
 		} else {
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 				"Invalid channel %u MHz\n", freq);
 			return false;
 		}
@@ -79,7 +79,7 @@ ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
 		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
 	} else {
-		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Invalid channel %u MHz\n", freq);
 		return false;
 	}
@@ -96,9 +96,8 @@ ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 	return true;
 }
 
-bool
-ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
-			    struct ath9k_channel *chan)
+void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
+				 struct ath9k_channel *chan)
 {
 	u16 bMode, fracMode, aModeRefSel = 0;
 	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
@@ -169,8 +168,6 @@ ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 
 	ah->curchan = chan;
 	ah->curchan_rad_index = -1;
-
-	return true;
 }
 
 static void
diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 0f7f8e0c9c9..c70f530642f 100644
--- a/drivers/net/wireless/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -17,7 +17,7 @@
 #ifndef PHY_H
 #define PHY_H
 
-bool ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
+void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 				 struct ath9k_channel
 				 *chan);
 bool ath9k_hw_set_channel(struct ath_hw *ah,
@@ -556,9 +556,6 @@ bool ath9k_hw_init_rf(struct ath_hw *ah,
 		int r;							\
 		for (r = 0; r < ((iniarray)->ia_rows); r++) {		\
 			REG_WRITE(ah, INI_RA((iniarray), r, 0), (regData)[r]); \
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, \
-				"RF 0x%x V 0x%x\n", \
-				INI_RA((iniarray), r, 0), (regData)[r]); \
 			DO_DELAY(regWr);				\
 		}							\
 	} while (0)
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 824ccbb8b7b..ba06e78b2f5 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -17,7 +17,7 @@
 
 #include "ath9k.h"
 
-static struct ath_rate_table ar5416_11na_ratetable = {
+static const struct ath_rate_table ar5416_11na_ratetable = {
 	42,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
@@ -155,7 +155,7 @@ static struct ath_rate_table ar5416_11na_ratetable = {
 /* 4ms frame limit not used for NG mode.  The values filled
  * for HT are the 64K max aggregate limit */
 
-static struct ath_rate_table ar5416_11ng_ratetable = {
+static const struct ath_rate_table ar5416_11ng_ratetable = {
 	46,
 	{
 		{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -302,7 +302,7 @@ static struct ath_rate_table ar5416_11ng_ratetable = {
 	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
 };
 
-static struct ath_rate_table ar5416_11a_ratetable = {
+static const struct ath_rate_table ar5416_11a_ratetable = {
 	8,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
@@ -335,7 +335,7 @@ static struct ath_rate_table ar5416_11a_ratetable = {
 	0,   /* Phy rates allowed initially */
 };
 
-static struct ath_rate_table ar5416_11g_ratetable = {
+static const struct ath_rate_table ar5416_11g_ratetable = {
 	12,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -380,7 +380,7 @@ static struct ath_rate_table ar5416_11g_ratetable = {
 	0,   /* Phy rates allowed initially */
 };
 
-static struct ath_rate_table ar5416_11b_ratetable = {
+static const struct ath_rate_table ar5416_11b_ratetable = {
 	4,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -420,7 +420,7 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c)
 	}
 }
 
-static void ath_rc_sort_validrates(struct ath_rate_table *rate_table,
+static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
 				   struct ath_rate_priv *ath_rc_priv)
 {
 	u8 i, j, idx, idx_next;
@@ -461,10 +461,11 @@ static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv,
 	return ath_rc_priv->valid_rate_index[index];
 }
 
-static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table,
-					      struct ath_rate_priv *ath_rc_priv,
-					      u8 cur_valid_txrate,
-					      u8 *next_idx)
+static inline
+int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
+				struct ath_rate_priv *ath_rc_priv,
+				u8 cur_valid_txrate,
+				u8 *next_idx)
 {
 	u8 i;
 
@@ -500,7 +501,7 @@ static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
 }
 
 static inline int
-ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table,
+ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table,
 				 struct ath_rate_priv *ath_rc_priv,
 				 u8 cur_valid_txrate, u8 *next_idx)
 {
@@ -517,14 +518,14 @@ ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table,
 }
 
 static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
-				 struct ath_rate_table *rate_table,
+				 const struct ath_rate_table *rate_table,
 				 u32 capflag)
 {
 	u8 i, hi = 0;
 	u32 valid;
 
 	for (i = 0; i < rate_table->rate_cnt; i++) {
-		valid = (ath_rc_priv->single_stream ?
+		valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
 			 rate_table->info[i].valid_single_stream :
 			 rate_table->info[i].valid);
 		if (valid == 1) {
@@ -547,7 +548,7 @@ static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
 }
 
 static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
-				struct ath_rate_table *rate_table,
+				const struct ath_rate_table *rate_table,
 				struct ath_rateset *rateset,
 				u32 capflag)
 {
@@ -557,9 +558,9 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
 	for (i = 0; i < rateset->rs_nrates; i++) {
 		for (j = 0; j < rate_table->rate_cnt; j++) {
 			u32 phy = rate_table->info[j].phy;
-			u32 valid = (ath_rc_priv->single_stream ?
-				rate_table->info[j].valid_single_stream :
-				rate_table->info[j].valid);
+			u32 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
+				     rate_table->info[j].valid_single_stream :
+				     rate_table->info[j].valid);
 			u8 rate = rateset->rs_rates[i];
 			u8 dot11rate = rate_table->info[j].dot11rate;
 
@@ -592,7 +593,7 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
 }
 
 static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
-				  struct ath_rate_table *rate_table,
+				  const struct ath_rate_table *rate_table,
 				  u8 *mcs_set, u32 capflag)
 {
 	struct ath_rateset *rateset = (struct ath_rateset *)mcs_set;
@@ -603,7 +604,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 	for (i = 0; i < rateset->rs_nrates; i++) {
 		for (j = 0; j < rate_table->rate_cnt; j++) {
 			u32 phy = rate_table->info[j].phy;
-			u32 valid = (ath_rc_priv->single_stream ?
+			u32 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
 				     rate_table->info[j].valid_single_stream :
 				     rate_table->info[j].valid);
 			u8 rate = rateset->rs_rates[i];
@@ -630,7 +631,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 
 static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
-			     struct ath_rate_table *rate_table,
+			     const struct ath_rate_table *rate_table,
 			     int *is_probing)
 {
 	u32 dt, best_thruput, this_thruput, now_msec;
@@ -740,14 +741,15 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
 	if (rate > (ath_rc_priv->rate_table_size - 1))
 		rate = ath_rc_priv->rate_table_size - 1;
 
-	ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) ||
+	ASSERT((rate_table->info[rate].valid &&
+		(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) ||
 	       (rate_table->info[rate].valid_single_stream &&
-		ath_rc_priv->single_stream));
+		!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)));
 
 	return rate;
 }
 
-static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
+static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table,
 				   struct ieee80211_tx_rate *rate,
 				   struct ieee80211_tx_rate_control *txrc,
 				   u8 tries, u8 rix, int rtsctsenable)
@@ -768,7 +770,7 @@ static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
 }
 
 static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
-				   struct ath_rate_table *rate_table,
+				   const struct ath_rate_table *rate_table,
 				   struct ieee80211_tx_info *tx_info)
 {
 	struct ieee80211_tx_rate *rates = tx_info->control.rates;
@@ -806,12 +808,12 @@ static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
 
 static u8 ath_rc_rate_getidx(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
-			     struct ath_rate_table *rate_table,
+			     const struct ath_rate_table *rate_table,
 			     u8 rix, u16 stepdown,
 			     u16 min_rate)
 {
 	u32 j;
-	u8 nextindex;
+	u8 nextindex = 0;
 
 	if (min_rate) {
 		for (j = RATE_TABLE_SIZE; j > 0; j--) {
@@ -837,7 +839,7 @@ static void ath_rc_ratefind(struct ath_softc *sc,
 			    struct ath_rate_priv *ath_rc_priv,
 			    struct ieee80211_tx_rate_control *txrc)
 {
-	struct ath_rate_table *rate_table;
+	const struct ath_rate_table *rate_table;
 	struct sk_buff *skb = txrc->skb;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_rate *rates = tx_info->control.rates;
@@ -936,7 +938,7 @@ static void ath_rc_ratefind(struct ath_softc *sc,
 }
 
 static bool ath_rc_update_per(struct ath_softc *sc,
-			      struct ath_rate_table *rate_table,
+			      const struct ath_rate_table *rate_table,
 			      struct ath_rate_priv *ath_rc_priv,
 			      struct ath_tx_info_priv *tx_info_priv,
 			      int tx_rate, int xretries, int retries,
@@ -1141,7 +1143,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
 	int rate;
 	u8 last_per;
 	bool state_change = false;
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
+	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	int size = ath_rc_priv->rate_table_size;
 
 	if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
@@ -1275,7 +1277,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
 #undef CHK_RSSI
 }
 
-static int ath_rc_get_rateindex(struct ath_rate_table *rate_table,
+static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
 				struct ieee80211_tx_rate *rate)
 {
 	int rix;
@@ -1299,7 +1301,7 @@ static void ath_rc_tx_status(struct ath_softc *sc,
 			     int final_ts_idx, int xretries, int long_retry)
 {
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	struct ath_rate_table *rate_table;
+	const struct ath_rate_table *rate_table;
 	struct ieee80211_tx_rate *rates = tx_info->status.rates;
 	u8 flags;
 	u32 i = 0, rix;
@@ -1320,7 +1322,7 @@ static void ath_rc_tx_status(struct ath_softc *sc,
 				 * 40 to 20 => don't update */
 
 				if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
-				    (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG))
+				    !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
 					return;
 
 				rix = ath_rc_get_rateindex(rate_table, &rates[i]);
@@ -1345,18 +1347,19 @@ static void ath_rc_tx_status(struct ath_softc *sc,
 
 	/* If HT40 and we have switched mode from 40 to 20 => don't update */
 	if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
-	    (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) {
+	    !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
 		return;
-	}
 
 	rix = ath_rc_get_rateindex(rate_table, &rates[i]);
 	ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix,
 			 xretries, long_retry);
 }
 
-static struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
-						    enum ieee80211_band band,
-						    bool is_ht, bool is_cw_40)
+static const
+struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
+					     enum ieee80211_band band,
+					     bool is_ht,
+					     bool is_cw_40)
 {
 	int mode = 0;
 
@@ -1390,7 +1393,7 @@ static void ath_rc_init(struct ath_softc *sc,
 			struct ath_rate_priv *ath_rc_priv,
 			struct ieee80211_supported_band *sband,
 			struct ieee80211_sta *sta,
-			struct ath_rate_table *rate_table)
+			const struct ath_rate_table *rate_table)
 {
 	struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
 	u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
@@ -1420,10 +1423,6 @@ static void ath_rc_init(struct ath_softc *sc,
 			ath_rc_priv->valid_phy_rateidx[i][j] = 0;
 		ath_rc_priv->valid_phy_ratecnt[i] = 0;
 	}
-	ath_rc_priv->rc_phy_mode = ath_rc_priv->ht_cap & WLAN_RC_40_FLAG;
-
-	/* Set stream capability */
-	ath_rc_priv->single_stream = (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ? 0 : 1;
 
 	if (!rateset->rs_nrates) {
 		/* No working rate, just initialize valid rates */
@@ -1572,12 +1571,13 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
 	__le16 fc = hdr->frame_control;
 
-	/* lowest rate for management and multicast/broadcast frames */
-	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
-	    !sta) {
+	/* lowest rate for management and NO_ACK frames */
+	if (!ieee80211_is_data(fc) ||
+	    tx_info->flags & IEEE80211_TX_CTL_NO_ACK || !sta) {
 		tx_info->control.rates[0].idx = rate_lowest_index(sband, sta);
 		tx_info->control.rates[0].count =
-			is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY;
+			(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+				1 : ATH_MGT_TXMAXTRY;
 		return;
 	}
 
@@ -1590,7 +1590,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table = NULL;
 	bool is_cw40, is_sgi40;
 	int i, j = 0;
 
@@ -1639,7 +1639,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table = NULL;
 	bool oper_cw40 = false, oper_sgi40;
 	bool local_cw40 = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG) ?
 		true : false;
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 199a3ce57d6..e3abd76103f 100644
--- a/drivers/net/wireless/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -24,7 +24,6 @@ struct ath_softc;
 #define ATH_RATE_MAX     30
 #define RATE_TABLE_SIZE  64
 #define MAX_TX_RATE_PHY  48
-#define WLAN_CTRL_FRAME_SIZE (2+2+6+4)
 
 /* VALID_ALL - valid for 20/40/Legacy,
  * VALID - Legacy only,
@@ -158,7 +157,6 @@ struct ath_rateset {
  * @probe_interval: interval for ratectrl to probe for other rates
  * @prev_data_rix: rate idx of last data frame
  * @ht_cap: HT capabilities
- * @single_stream: When TRUE, only single TX stream possible
  * @neg_rates: Negotatied rates
  * @neg_ht_rates: Negotiated HT rates
  */
@@ -176,10 +174,8 @@ struct ath_rate_priv {
 	u8 max_valid_rate;
 	u8 valid_rate_index[RATE_TABLE_SIZE];
 	u8 ht_cap;
-	u8 single_stream;
 	u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
 	u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
-	u8 rc_phy_mode;
 	u8 rate_max_phy;
 	u32 rssi_time;
 	u32 rssi_down_time;
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index dd1f3015674..5014a19b0f7 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -283,54 +283,51 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 	struct ath_buf *bf;
 	int error = 0;
 
-	do {
-		spin_lock_init(&sc->rx.rxflushlock);
-		sc->sc_flags &= ~SC_OP_RXFLUSH;
-		spin_lock_init(&sc->rx.rxbuflock);
-
-		sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
-					   min(sc->cachelsz,
-					       (u16)64));
+	spin_lock_init(&sc->rx.rxflushlock);
+	sc->sc_flags &= ~SC_OP_RXFLUSH;
+	spin_lock_init(&sc->rx.rxbuflock);
 
-		DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
-			sc->cachelsz, sc->rx.bufsize);
+	sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
+				 min(sc->cachelsz, (u16)64));
 
-		/* Initialize rx descriptors */
+	DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+		sc->cachelsz, sc->rx.bufsize);
 
-		error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
-					  "rx", nbufs, 1);
-		if (error != 0) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"failed to allocate rx descriptors: %d\n", error);
-			break;
-		}
+	/* Initialize rx descriptors */
 
-		list_for_each_entry(bf, &sc->rx.rxbuf, list) {
-			skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
-			if (skb == NULL) {
-				error = -ENOMEM;
-				break;
-			}
+	error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
+				  "rx", nbufs, 1);
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"failed to allocate rx descriptors: %d\n", error);
+		goto err;
+	}
 
-			bf->bf_mpdu = skb;
-			bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
-							 sc->rx.bufsize,
-							 DMA_FROM_DEVICE);
-			if (unlikely(dma_mapping_error(sc->dev,
-				  bf->bf_buf_addr))) {
-				dev_kfree_skb_any(skb);
-				bf->bf_mpdu = NULL;
-				DPRINTF(sc, ATH_DBG_CONFIG,
-					"dma_mapping_error() on RX init\n");
-				error = -ENOMEM;
-				break;
-			}
-			bf->bf_dmacontext = bf->bf_buf_addr;
+	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
+		skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
+		if (skb == NULL) {
+			error = -ENOMEM;
+			goto err;
 		}
-		sc->rx.rxlink = NULL;
 
-	} while (0);
+		bf->bf_mpdu = skb;
+		bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
+						 sc->rx.bufsize,
+						 DMA_FROM_DEVICE);
+		if (unlikely(dma_mapping_error(sc->dev,
+					       bf->bf_buf_addr))) {
+			dev_kfree_skb_any(skb);
+			bf->bf_mpdu = NULL;
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"dma_mapping_error() on RX init\n");
+			error = -ENOMEM;
+			goto err;
+		}
+		bf->bf_dmacontext = bf->bf_buf_addr;
+	}
+	sc->rx.rxlink = NULL;
 
+err:
 	if (error)
 		ath_rx_cleanup(sc);
 
@@ -345,10 +342,8 @@ void ath_rx_cleanup(struct ath_softc *sc)
 	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
 		skb = bf->bf_mpdu;
 		if (skb) {
-			dma_unmap_single(sc->dev,
-					 bf->bf_buf_addr,
-					 sc->rx.bufsize,
-					 DMA_FROM_DEVICE);
+			dma_unmap_single(sc->dev, bf->bf_buf_addr,
+					 sc->rx.bufsize, DMA_FROM_DEVICE);
 			dev_kfree_skb(skb);
 		}
 	}
@@ -478,6 +473,159 @@ void ath_flushrecv(struct ath_softc *sc)
 	spin_unlock_bh(&sc->rx.rxflushlock);
 }
 
+static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
+{
+	/* Check whether the Beacon frame has DTIM indicating buffered bc/mc */
+	struct ieee80211_mgmt *mgmt;
+	u8 *pos, *end, id, elen;
+	struct ieee80211_tim_ie *tim;
+
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	pos = mgmt->u.beacon.variable;
+	end = skb->data + skb->len;
+
+	while (pos + 2 < end) {
+		id = *pos++;
+		elen = *pos++;
+		if (pos + elen > end)
+			break;
+
+		if (id == WLAN_EID_TIM) {
+			if (elen < sizeof(*tim))
+				break;
+			tim = (struct ieee80211_tim_ie *) pos;
+			if (tim->dtim_count != 0)
+				break;
+			return tim->bitmap_ctrl & 0x01;
+		}
+
+		pos += elen;
+	}
+
+	return false;
+}
+
+static void ath_rx_ps_back_to_sleep(struct ath_softc *sc)
+{
+	sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
+}
+
+static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ieee80211_mgmt *mgmt;
+
+	if (skb->len < 24 + 8 + 2 + 2)
+		return;
+
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	if (memcmp(sc->curbssid, mgmt->bssid, ETH_ALEN) != 0)
+		return; /* not from our current AP */
+
+	if (sc->sc_flags & SC_OP_BEACON_SYNC) {
+		sc->sc_flags &= ~SC_OP_BEACON_SYNC;
+		DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on "
+			"timestamp from the AP\n");
+		ath_beacon_config(sc, NULL);
+	}
+
+	if (!(sc->hw->conf.flags & IEEE80211_CONF_PS)) {
+		/* We are not in PS mode anymore; remain awake */
+		DPRINTF(sc, ATH_DBG_PS, "Not in PS mode anymore, remain "
+			"awake\n");
+		sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
+		return;
+	}
+
+	if (ath_beacon_dtim_pending_cab(skb)) {
+		/*
+		 * Remain awake waiting for buffered broadcast/multicast
+		 * frames.
+		 */
+		DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
+			"buffered broadcast/multicast frame(s)\n");
+		sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+		return;
+	}
+
+	if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) {
+		/*
+		 * This can happen if a broadcast frame is dropped or the AP
+		 * fails to send a frame indicating that all CAB frames have
+		 * been delivered.
+		 */
+		DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
+	}
+
+	/* No more broadcast/multicast frames to be received at this point. */
+	ath_rx_ps_back_to_sleep(sc);
+}
+
+static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+
+	/* Process Beacon and CAB receive in PS state */
+	if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) &&
+	    ieee80211_is_beacon(hdr->frame_control))
+		ath_rx_ps_beacon(sc, skb);
+	else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) &&
+		 (ieee80211_is_data(hdr->frame_control) ||
+		  ieee80211_is_action(hdr->frame_control)) &&
+		 is_multicast_ether_addr(hdr->addr1) &&
+		 !ieee80211_has_moredata(hdr->frame_control)) {
+		DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
+			"sleep\n");
+		/*
+		 * No more broadcast/multicast frames to be received at this
+		 * point.
+		 */
+		ath_rx_ps_back_to_sleep(sc);
+	} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
+		   !is_multicast_ether_addr(hdr->addr1) &&
+		   !ieee80211_has_morefrags(hdr->frame_control)) {
+		sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
+		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
+			"received PS-Poll data (0x%x)\n",
+			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					SC_OP_WAIT_FOR_CAB |
+					SC_OP_WAIT_FOR_PSPOLL_DATA |
+					SC_OP_WAIT_FOR_TX_ACK));
+	}
+}
+
+static void ath_rx_send_to_mac80211(struct ath_softc *sc, struct sk_buff *skb,
+				    struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_hdr *hdr;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+
+	/* Send the frame to mac80211 */
+	if (is_multicast_ether_addr(hdr->addr1)) {
+		int i;
+		/*
+		 * Deliver broadcast/multicast frames to all suitable
+		 * virtual wiphys.
+		 */
+		/* TODO: filter based on channel configuration */
+		for (i = 0; i < sc->num_sec_wiphy; i++) {
+			struct ath_wiphy *aphy = sc->sec_wiphy[i];
+			struct sk_buff *nskb;
+			if (aphy == NULL)
+				continue;
+			nskb = skb_copy(skb, GFP_ATOMIC);
+			if (nskb)
+				__ieee80211_rx(aphy->hw, nskb, rx_status);
+		}
+		__ieee80211_rx(sc->hw, skb, rx_status);
+	} else {
+		/* Deliver unicast frames based on receiver address */
+		__ieee80211_rx(ath_get_virt_hw(sc, hdr), skb, rx_status);
+	}
+}
+
 int ath_rx_tasklet(struct ath_softc *sc, int flush)
 {
 #define PA2DESC(_sc, _pa)                                               \
@@ -627,7 +775,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 
 		if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
 			rx_status.flag |= RX_FLAG_DECRYPTED;
-		} else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED)
+		} else if (ieee80211_has_protected(fc)
 			   && !decrypt_error && skb->len >= hdrlen + 4) {
 			keyix = skb->data[hdrlen + 3] >> 6;
 
@@ -636,36 +784,11 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 		}
 		if (ah->sw_mgmt_crypto &&
 		    (rx_status.flag & RX_FLAG_DECRYPTED) &&
-		    ieee80211_is_mgmt(hdr->frame_control)) {
+		    ieee80211_is_mgmt(fc)) {
 			/* Use software decrypt for management frames. */
 			rx_status.flag &= ~RX_FLAG_DECRYPTED;
 		}
 
-		/* Send the frame to mac80211 */
-		if (hdr->addr1[5] & 0x01) {
-			int i;
-			/*
-			 * Deliver broadcast/multicast frames to all suitable
-			 * virtual wiphys.
-			 */
-			/* TODO: filter based on channel configuration */
-			for (i = 0; i < sc->num_sec_wiphy; i++) {
-				struct ath_wiphy *aphy = sc->sec_wiphy[i];
-				struct sk_buff *nskb;
-				if (aphy == NULL)
-					continue;
-				nskb = skb_copy(skb, GFP_ATOMIC);
-				if (nskb)
-					__ieee80211_rx(aphy->hw, nskb,
-						       &rx_status);
-			}
-			__ieee80211_rx(sc->hw, skb, &rx_status);
-		} else {
-			/* Deliver unicast frames based on receiver address */
-			__ieee80211_rx(ath_get_virt_hw(sc, hdr), skb,
-				       &rx_status);
-		}
-
 		/* We will now give hardware our shiny new allocated skb */
 		bf->bf_mpdu = requeue_skb;
 		bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data,
@@ -675,8 +798,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 			  bf->bf_buf_addr))) {
 			dev_kfree_skb_any(requeue_skb);
 			bf->bf_mpdu = NULL;
-			DPRINTF(sc, ATH_DBG_CONFIG,
+			DPRINTF(sc, ATH_DBG_FATAL,
 				"dma_mapping_error() on RX\n");
+			ath_rx_send_to_mac80211(sc, skb, &rx_status);
 			break;
 		}
 		bf->bf_dmacontext = bf->bf_buf_addr;
@@ -692,11 +816,12 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 			sc->rx.rxotherant = 0;
 		}
 
-		if (ieee80211_is_beacon(fc) &&
-				(sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) {
-			sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
-			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
-		}
+		if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					     SC_OP_WAIT_FOR_PSPOLL_DATA)))
+			ath_rx_ps(sc, skb);
+
+		ath_rx_send_to_mac80211(sc, skb, &rx_status);
+
 requeue:
 		list_move_tail(&bf->list, &sc->rx.rxbuf);
 		ath_rx_buf_link(sc, bf);
diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 52605246679..52605246679 100644
--- a/drivers/net/wireless/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
diff --git a/drivers/net/wireless/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index 1ff429b027d..1ff429b027d 100644
--- a/drivers/net/wireless/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 689bdbf7880..b61a071788a 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -283,7 +283,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
 	bool rc_update = true;
 
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	hdr = (struct ieee80211_hdr *)skb->data;
 
 	rcu_read_lock();
@@ -380,8 +380,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar);
 		} else {
 			/* retry the un-acked ones */
-			if (bf->bf_next == NULL &&
-			    bf_last->bf_status & ATH_BUFSTATUS_STALE) {
+			if (bf->bf_next == NULL && bf_last->bf_stale) {
 				struct ath_buf *tbf;
 
 				tbf = ath_clone_txbuf(sc, bf_last);
@@ -435,7 +434,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 			   struct ath_atx_tid *tid)
 {
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
+	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
@@ -444,7 +443,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 	u16 aggr_limit, legacy = 0, maxampdu;
 	int i;
 
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	tx_info = IEEE80211_SKB_CB(skb);
 	rates = tx_info->control.rates;
 	tx_info_priv = (struct ath_tx_info_priv *)tx_info->rate_driver_data[0];
@@ -498,7 +497,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 				  struct ath_buf *bf, u16 frmlen)
 {
-	struct ath_rate_table *rt = sc->cur_rate_table;
+	const struct ath_rate_table *rt = sc->cur_rate_table;
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	u32 nsymbits, nsymbols, mpdudensity;
@@ -712,6 +711,7 @@ int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
 		return 0;
 
 	if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
+		txtid->state &= ~AGGR_ADDBA_PROGRESS;
 		txtid->addba_exchangeattempts = 0;
 		return 0;
 	}
@@ -972,7 +972,7 @@ int ath_cabq_update(struct ath_softc *sc)
 	else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
 		sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
 
-	qi.tqi_readyTime = (sc->hw->conf.beacon_int *
+	qi.tqi_readyTime = (sc->beacon_interval *
 			    sc->config.cabqReadytime) / 100;
 	ath_txq_update(sc, qnum, &qi);
 
@@ -1004,7 +1004,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
 
 		bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
 
-		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+		if (bf->bf_stale) {
 			list_del(&bf->list);
 			spin_unlock_bh(&txq->axq_lock);
 
@@ -1071,7 +1071,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true);
 		if (r)
 			DPRINTF(sc, ATH_DBG_FATAL,
-				"Unable to reset hardware; reset status %u\n",
+				"Unable to reset hardware; reset status %d\n",
 				r);
 		spin_unlock_bh(&sc->sc_resetlock);
 	}
@@ -1408,7 +1408,7 @@ static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
 static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
 			    int width, int half_gi, bool shortPreamble)
 {
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
+	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	u32 nbits, nsymbits, duration, nsymbols;
 	u8 rc;
 	int streams, pktlen;
@@ -1440,7 +1440,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
 
 static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 {
-	struct ath_rate_table *rt = sc->cur_rate_table;
+	const struct ath_rate_table *rt = sc->cur_rate_table;
 	struct ath9k_11n_rate_series series[4];
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
@@ -1452,7 +1452,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 
 	memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
 
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	tx_info = IEEE80211_SKB_CB(skb);
 	rates = tx_info->control.rates;
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -1573,8 +1573,9 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 					   skb->len, DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_dmacontext))) {
 		bf->bf_mpdu = NULL;
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"dma_mapping_error() on TX\n");
+		kfree(tx_info_priv);
+		tx_info->rate_driver_data[0] = NULL;
+		DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error() on TX\n");
 		return -ENOMEM;
 	}
 
@@ -1586,7 +1587,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
 			     struct ath_tx_control *txctl)
 {
-	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_tx_info *tx_info =  IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ath_node *an = NULL;
@@ -1790,6 +1791,16 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		skb_pull(skb, padsize);
 	}
 
+	if (sc->sc_flags & SC_OP_WAIT_FOR_TX_ACK) {
+		sc->sc_flags &= ~SC_OP_WAIT_FOR_TX_ACK;
+		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
+			"received TX status (0x%x)\n",
+			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					SC_OP_WAIT_FOR_CAB |
+					SC_OP_WAIT_FOR_PSPOLL_DATA |
+					SC_OP_WAIT_FOR_TX_ACK));
+	}
+
 	if (frame_type == ATH9K_NOT_INTERNAL)
 		ieee80211_tx_status(hw, skb);
 	else
@@ -1860,7 +1871,7 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
 static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds,
 			     int nbad, int txok, bool update_rc)
 {
-	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
@@ -1941,7 +1952,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		 * it with the STALE flag.
 		 */
 		bf_held = NULL;
-		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+		if (bf->bf_stale) {
 			bf_held = bf;
 			if (list_is_last(&bf_held->list, &txq->axq_q)) {
 				txq->axq_link = NULL;
@@ -1982,7 +1993,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		 * however leave the last descriptor back as the holding
 		 * descriptor for hw.
 		 */
-		lastbf->bf_status |= ATH_BUFSTATUS_STALE;
+		lastbf->bf_stale = true;
 		INIT_LIST_HEAD(&bf_head);
 		if (!list_is_singular(&lastbf->list))
 			list_cut_position(&bf_head,
@@ -2048,44 +2059,38 @@ int ath_tx_init(struct ath_softc *sc, int nbufs)
 {
 	int error = 0;
 
-	do {
-		spin_lock_init(&sc->tx.txbuflock);
-
-		error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
-			"tx", nbufs, 1);
-		if (error != 0) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Failed to allocate tx descriptors: %d\n",
-				error);
-			break;
-		}
+	spin_lock_init(&sc->tx.txbuflock);
 
-		error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
-					  "beacon", ATH_BCBUF, 1);
-		if (error != 0) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Failed to allocate beacon descriptors: %d\n",
-				error);
-			break;
-		}
+	error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
+				  "tx", nbufs, 1);
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"Failed to allocate tx descriptors: %d\n", error);
+		goto err;
+	}
 
-	} while (0);
+	error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
+				  "beacon", ATH_BCBUF, 1);
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"Failed to allocate beacon descriptors: %d\n", error);
+		goto err;
+	}
 
+err:
 	if (error != 0)
 		ath_tx_cleanup(sc);
 
 	return error;
 }
 
-int ath_tx_cleanup(struct ath_softc *sc)
+void ath_tx_cleanup(struct ath_softc *sc)
 {
 	if (sc->beacon.bdma.dd_desc_len != 0)
 		ath_descdma_cleanup(sc, &sc->beacon.bdma, &sc->beacon.bbuf);
 
 	if (sc->tx.txdma.dd_desc_len != 0)
 		ath_descdma_cleanup(sc, &sc->tx.txdma, &sc->tx.txbuf);
-
-	return 0;
 }
 
 void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
diff --git a/drivers/net/wireless/ath/main.c b/drivers/net/wireless/ath/main.c
new file mode 100644
index 00000000000..9949b11cb15
--- /dev/null
+++ b/drivers/net/wireless/ath/main.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Shared library for Atheros wireless LAN cards.");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath/regd.c
index 4ca62510229..eef370bd121 100644
--- a/drivers/net/wireless/ath9k/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -16,7 +16,9 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include "ath9k.h"
+#include <net/cfg80211.h>
+#include <net/mac80211.h>
+#include "regd.h"
 #include "regd_common.h"
 
 /*
@@ -55,7 +57,7 @@
 
 /* Can be used for:
  * 0x60, 0x61, 0x62 */
-static const struct ieee80211_regdomain ath9k_world_regdom_60_61_62 = {
+static const struct ieee80211_regdomain ath_world_regdom_60_61_62 = {
 	.n_reg_rules = 5,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -65,7 +67,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_60_61_62 = {
 };
 
 /* Can be used by 0x63 and 0x65 */
-static const struct ieee80211_regdomain ath9k_world_regdom_63_65 = {
+static const struct ieee80211_regdomain ath_world_regdom_63_65 = {
 	.n_reg_rules = 4,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -76,7 +78,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_63_65 = {
 };
 
 /* Can be used by 0x64 only */
-static const struct ieee80211_regdomain ath9k_world_regdom_64 = {
+static const struct ieee80211_regdomain ath_world_regdom_64 = {
 	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -86,7 +88,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_64 = {
 };
 
 /* Can be used by 0x66 and 0x69 */
-static const struct ieee80211_regdomain ath9k_world_regdom_66_69 = {
+static const struct ieee80211_regdomain ath_world_regdom_66_69 = {
 	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -96,7 +98,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_66_69 = {
 };
 
 /* Can be used by 0x67, 0x6A and 0x68 */
-static const struct ieee80211_regdomain ath9k_world_regdom_67_68_6A = {
+static const struct ieee80211_regdomain ath_world_regdom_67_68_6A = {
 	.n_reg_rules = 4,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -112,49 +114,51 @@ static inline bool is_wwr_sku(u16 regd)
 		(regd == WORLD);
 }
 
-static u16 ath9k_regd_get_eepromRD(struct ath_hw *ah)
+static u16 ath_regd_get_eepromRD(struct ath_regulatory *reg)
 {
-	return ah->regulatory.current_rd & ~WORLDWIDE_ROAMING_FLAG;
+	return reg->current_rd & ~WORLDWIDE_ROAMING_FLAG;
 }
 
-bool ath9k_is_world_regd(struct ath_hw *ah)
+bool ath_is_world_regd(struct ath_regulatory *reg)
 {
-	return is_wwr_sku(ath9k_regd_get_eepromRD(ah));
+	return is_wwr_sku(ath_regd_get_eepromRD(reg));
 }
+EXPORT_SYMBOL(ath_is_world_regd);
 
-const struct ieee80211_regdomain *ath9k_default_world_regdomain(void)
+static const struct ieee80211_regdomain *ath_default_world_regdomain(void)
 {
 	/* this is the most restrictive */
-	return &ath9k_world_regdom_64;
+	return &ath_world_regdom_64;
 }
 
-const struct ieee80211_regdomain *ath9k_world_regdomain(struct ath_hw *ah)
+static const struct
+ieee80211_regdomain *ath_world_regdomain(struct ath_regulatory *reg)
 {
-	switch (ah->regulatory.regpair->regDmnEnum) {
+	switch (reg->regpair->regDmnEnum) {
 	case 0x60:
 	case 0x61:
 	case 0x62:
-		return &ath9k_world_regdom_60_61_62;
+		return &ath_world_regdom_60_61_62;
 	case 0x63:
 	case 0x65:
-		return &ath9k_world_regdom_63_65;
+		return &ath_world_regdom_63_65;
 	case 0x64:
-		return &ath9k_world_regdom_64;
+		return &ath_world_regdom_64;
 	case 0x66:
 	case 0x69:
-		return &ath9k_world_regdom_66_69;
+		return &ath_world_regdom_66_69;
 	case 0x67:
 	case 0x68:
 	case 0x6A:
-		return &ath9k_world_regdom_67_68_6A;
+		return &ath_world_regdom_67_68_6A;
 	default:
 		WARN_ON(1);
-		return ath9k_default_world_regdomain();
+		return ath_default_world_regdomain();
 	}
 }
 
 /* Frequency is one where radar detection is required */
-static bool ath9k_is_radar_freq(u16 center_freq)
+static bool ath_is_radar_freq(u16 center_freq)
 {
 	return (center_freq >= 5260 && center_freq <= 5700);
 }
@@ -168,9 +172,9 @@ static bool ath9k_is_radar_freq(u16 center_freq)
  *   received a beacon on a channel we can enable active scan and
  *   adhoc (or beaconing).
  */
-static void ath9k_reg_apply_beaconing_flags(
-	struct wiphy *wiphy,
-	enum nl80211_reg_initiator initiator)
+static void
+ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
+			      enum nl80211_reg_initiator initiator)
 {
 	enum ieee80211_band band;
 	struct ieee80211_supported_band *sband;
@@ -191,13 +195,15 @@ static void ath9k_reg_apply_beaconing_flags(
 
 			ch = &sband->channels[i];
 
-			if (ath9k_is_radar_freq(ch->center_freq) ||
+			if (ath_is_radar_freq(ch->center_freq) ||
 			    (ch->flags & IEEE80211_CHAN_RADAR))
 				continue;
 
 			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
-				r = freq_reg_info(wiphy, ch->center_freq,
-					&bandwidth, &reg_rule);
+				r = freq_reg_info(wiphy,
+						  ch->center_freq,
+						  bandwidth,
+						  &reg_rule);
 				if (r)
 					continue;
 				/*
@@ -227,9 +233,9 @@ static void ath9k_reg_apply_beaconing_flags(
 }
 
 /* Allows active scan scan on Ch 12 and 13 */
-static void ath9k_reg_apply_active_scan_flags(
-	struct wiphy *wiphy,
-	enum nl80211_reg_initiator initiator)
+static void
+ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
+				enum nl80211_reg_initiator initiator)
 {
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *ch;
@@ -261,7 +267,7 @@ static void ath9k_reg_apply_active_scan_flags(
 	 */
 
 	ch = &sband->channels[11]; /* CH 12 */
-	r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, &reg_rule);
+	r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
 	if (!r) {
 		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
 			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -269,7 +275,7 @@ static void ath9k_reg_apply_active_scan_flags(
 	}
 
 	ch = &sband->channels[12]; /* CH 13 */
-	r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, &reg_rule);
+	r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
 	if (!r) {
 		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
 			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -278,7 +284,7 @@ static void ath9k_reg_apply_active_scan_flags(
 }
 
 /* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
-void ath9k_reg_apply_radar_flags(struct wiphy *wiphy)
+static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
 {
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *ch;
@@ -291,7 +297,7 @@ void ath9k_reg_apply_radar_flags(struct wiphy *wiphy)
 
 	for (i = 0; i < sband->n_channels; i++) {
 		ch = &sband->channels[i];
-		if (!ath9k_is_radar_freq(ch->center_freq))
+		if (!ath_is_radar_freq(ch->center_freq))
 			continue;
 		/* We always enable radar detection/DFS on this
 		 * frequency range. Additionally we also apply on
@@ -310,37 +316,31 @@ void ath9k_reg_apply_radar_flags(struct wiphy *wiphy)
 	}
 }
 
-void ath9k_reg_apply_world_flags(struct wiphy *wiphy,
-				 enum nl80211_reg_initiator initiator)
+static void ath_reg_apply_world_flags(struct wiphy *wiphy,
+				      enum nl80211_reg_initiator initiator,
+				      struct ath_regulatory *reg)
 {
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_hw *ah = sc->sc_ah;
-
-	switch (ah->regulatory.regpair->regDmnEnum) {
+	switch (reg->regpair->regDmnEnum) {
 	case 0x60:
 	case 0x63:
 	case 0x66:
 	case 0x67:
-		ath9k_reg_apply_beaconing_flags(wiphy, initiator);
+		ath_reg_apply_beaconing_flags(wiphy, initiator);
 		break;
 	case 0x68:
-		ath9k_reg_apply_beaconing_flags(wiphy, initiator);
-		ath9k_reg_apply_active_scan_flags(wiphy, initiator);
+		ath_reg_apply_beaconing_flags(wiphy, initiator);
+		ath_reg_apply_active_scan_flags(wiphy, initiator);
 		break;
 	}
 	return;
 }
 
-int ath9k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+int ath_reg_notifier_apply(struct wiphy *wiphy,
+			   struct regulatory_request *request,
+			   struct ath_regulatory *reg)
 {
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-
 	/* We always apply this */
-	ath9k_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_radar_flags(wiphy);
 
 	switch (request->initiator) {
 	case NL80211_REGDOM_SET_BY_DRIVER:
@@ -348,39 +348,47 @@ int ath9k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 	case NL80211_REGDOM_SET_BY_USER:
 		break;
 	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
-		if (ath9k_is_world_regd(sc->sc_ah))
-			ath9k_reg_apply_world_flags(wiphy, request->initiator);
+		if (ath_is_world_regd(reg))
+			ath_reg_apply_world_flags(wiphy, request->initiator,
+						  reg);
 		break;
 	}
 
 	return 0;
 }
+EXPORT_SYMBOL(ath_reg_notifier_apply);
 
-bool ath9k_regd_is_eeprom_valid(struct ath_hw *ah)
+static bool ath_regd_is_eeprom_valid(struct ath_regulatory *reg)
 {
-	u16 rd = ath9k_regd_get_eepromRD(ah);
+	 u16 rd = ath_regd_get_eepromRD(reg);
 	int i;
 
 	if (rd & COUNTRY_ERD_FLAG) {
 		/* EEPROM value is a country code */
 		u16 cc = rd & ~COUNTRY_ERD_FLAG;
+		printk(KERN_DEBUG
+		       "ath: EEPROM indicates we should expect "
+			"a country code\n");
 		for (i = 0; i < ARRAY_SIZE(allCountries); i++)
 			if (allCountries[i].countryCode == cc)
 				return true;
 	} else {
 		/* EEPROM value is a regpair value */
+		if (rd != CTRY_DEFAULT)
+			printk(KERN_DEBUG "ath: EEPROM indicates we "
+			       "should expect a direct regpair map\n");
 		for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
 			if (regDomainPairs[i].regDmnEnum == rd)
 				return true;
 	}
-	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-		 "invalid regulatory domain/country code 0x%x\n", rd);
+	printk(KERN_DEBUG
+		 "ath: invalid regulatory domain/country code 0x%x\n", rd);
 	return false;
 }
 
 /* EEPROM country code to regpair mapping */
 static struct country_code_to_enum_rd*
-ath9k_regd_find_country(u16 countryCode)
+ath_regd_find_country(u16 countryCode)
 {
 	int i;
 
@@ -393,7 +401,7 @@ ath9k_regd_find_country(u16 countryCode)
 
 /* EEPROM rd code to regpair mapping */
 static struct country_code_to_enum_rd*
-ath9k_regd_find_country_by_rd(int regdmn)
+ath_regd_find_country_by_rd(int regdmn)
 {
 	int i;
 
@@ -405,13 +413,13 @@ ath9k_regd_find_country_by_rd(int regdmn)
 }
 
 /* Returns the map of the EEPROM set RD to a country code */
-static u16 ath9k_regd_get_default_country(u16 rd)
+static u16 ath_regd_get_default_country(u16 rd)
 {
 	if (rd & COUNTRY_ERD_FLAG) {
 		struct country_code_to_enum_rd *country = NULL;
 		u16 cc = rd & ~COUNTRY_ERD_FLAG;
 
-		country = ath9k_regd_find_country(cc);
+		country = ath_regd_find_country(cc);
 		if (country != NULL)
 			return cc;
 	}
@@ -420,7 +428,7 @@ static u16 ath9k_regd_get_default_country(u16 rd)
 }
 
 static struct reg_dmn_pair_mapping*
-ath9k_get_regpair(int regdmn)
+ath_get_regpair(int regdmn)
 {
 	int i;
 
@@ -433,87 +441,135 @@ ath9k_get_regpair(int regdmn)
 	return NULL;
 }
 
-int ath9k_regd_init(struct ath_hw *ah)
+static int
+ath_regd_init_wiphy(struct ath_regulatory *reg,
+		    struct wiphy *wiphy,
+		    int (*reg_notifier)(struct wiphy *wiphy,
+					struct regulatory_request *request))
+{
+	const struct ieee80211_regdomain *regd;
+
+	wiphy->reg_notifier = reg_notifier;
+	wiphy->strict_regulatory = true;
+
+	if (ath_is_world_regd(reg)) {
+		/*
+		 * Anything applied here (prior to wiphy registration) gets
+		 * saved on the wiphy orig_* parameters
+		 */
+		regd = ath_world_regdomain(reg);
+		wiphy->custom_regulatory = true;
+		wiphy->strict_regulatory = false;
+	} else {
+		/*
+		 * This gets applied in the case of the absense of CRDA,
+		 * it's our own custom world regulatory domain, similar to
+		 * cfg80211's but we enable passive scanning.
+		 */
+		regd = ath_default_world_regdomain();
+	}
+	wiphy_apply_custom_regulatory(wiphy, regd);
+	ath_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
+	return 0;
+}
+
+int
+ath_regd_init(struct ath_regulatory *reg,
+	      struct wiphy *wiphy,
+	      int (*reg_notifier)(struct wiphy *wiphy,
+				  struct regulatory_request *request))
 {
 	struct country_code_to_enum_rd *country = NULL;
 	u16 regdmn;
 
-	if (!ath9k_regd_is_eeprom_valid(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-			"Invalid EEPROM contents\n");
+	if (!reg)
+		return -EINVAL;
+
+	printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
+
+	if (!ath_regd_is_eeprom_valid(reg)) {
+		printk(KERN_ERR "ath: Invalid EEPROM contents\n");
 		return -EINVAL;
 	}
 
-	regdmn = ath9k_regd_get_eepromRD(ah);
-	ah->regulatory.country_code = ath9k_regd_get_default_country(regdmn);
+	regdmn = ath_regd_get_eepromRD(reg);
+	reg->country_code = ath_regd_get_default_country(regdmn);
 
-	if (ah->regulatory.country_code == CTRY_DEFAULT &&
-	    regdmn == CTRY_DEFAULT)
-		ah->regulatory.country_code = CTRY_UNITED_STATES;
+	if (reg->country_code == CTRY_DEFAULT &&
+	    regdmn == CTRY_DEFAULT) {
+		printk(KERN_DEBUG "ath: EEPROM indicates default "
+		       "country code should be used\n");
+		reg->country_code = CTRY_UNITED_STATES;
+	}
 
-	if (ah->regulatory.country_code == CTRY_DEFAULT) {
+	if (reg->country_code == CTRY_DEFAULT) {
 		country = NULL;
 	} else {
-		country = ath9k_regd_find_country(ah->regulatory.country_code);
+		printk(KERN_DEBUG "ath: doing EEPROM country->regdmn "
+		       "map search\n");
+		country = ath_regd_find_country(reg->country_code);
 		if (country == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-				"Country is NULL!!!!, cc= %d\n",
-				ah->regulatory.country_code);
+			printk(KERN_DEBUG
+				"ath: no valid country maps found for "
+				"country code: 0x%0x\n",
+				reg->country_code);
 			return -EINVAL;
-		} else
+		} else {
 			regdmn = country->regDmnEnum;
+			printk(KERN_DEBUG "ath: country maps to "
+			       "regdmn code: 0x%0x\n",
+			       regdmn);
+		}
 	}
 
-	ah->regulatory.regpair = ath9k_get_regpair(regdmn);
+	reg->regpair = ath_get_regpair(regdmn);
 
-	if (!ah->regulatory.regpair) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+	if (!reg->regpair) {
+		printk(KERN_DEBUG "ath: "
 			"No regulatory domain pair found, cannot continue\n");
 		return -EINVAL;
 	}
 
 	if (!country)
-		country = ath9k_regd_find_country_by_rd(regdmn);
+		country = ath_regd_find_country_by_rd(regdmn);
 
 	if (country) {
-		ah->regulatory.alpha2[0] = country->isoName[0];
-		ah->regulatory.alpha2[1] = country->isoName[1];
+		reg->alpha2[0] = country->isoName[0];
+		reg->alpha2[1] = country->isoName[1];
 	} else {
-		ah->regulatory.alpha2[0] = '0';
-		ah->regulatory.alpha2[1] = '0';
+		reg->alpha2[0] = '0';
+		reg->alpha2[1] = '0';
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-		"Country alpha2 being used: %c%c\n"
-		"Regulatory.Regpair detected: 0x%0x\n",
-		ah->regulatory.alpha2[0], ah->regulatory.alpha2[1],
-		ah->regulatory.regpair->regDmnEnum);
+	printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n",
+		reg->alpha2[0], reg->alpha2[1]);
+	printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
+		reg->regpair->regDmnEnum);
 
+	ath_regd_init_wiphy(reg, wiphy, reg_notifier);
 	return 0;
 }
+EXPORT_SYMBOL(ath_regd_init);
 
-u32 ath9k_regd_get_ctl(struct ath_hw *ah, struct ath9k_channel *chan)
+u32 ath_regd_get_band_ctl(struct ath_regulatory *reg,
+			  enum ieee80211_band band)
 {
-	u32 ctl = NO_CTL;
-
-	if (!ah->regulatory.regpair ||
-	    (ah->regulatory.country_code == CTRY_DEFAULT &&
-	     is_wwr_sku(ath9k_regd_get_eepromRD(ah)))) {
-		if (IS_CHAN_B(chan))
-			ctl = SD_NO_CTL | CTL_11B;
-		else if (IS_CHAN_G(chan))
-			ctl = SD_NO_CTL | CTL_11G;
-		else
-			ctl = SD_NO_CTL | CTL_11A;
-		return ctl;
+	if (!reg->regpair ||
+	    (reg->country_code == CTRY_DEFAULT &&
+	     is_wwr_sku(ath_regd_get_eepromRD(reg)))) {
+		return SD_NO_CTL;
 	}
 
-	if (IS_CHAN_B(chan))
-		ctl = ah->regulatory.regpair->reg_2ghz_ctl | CTL_11B;
-	else if (IS_CHAN_G(chan))
-		ctl = ah->regulatory.regpair->reg_2ghz_ctl | CTL_11G;
-	else
-		ctl = ah->regulatory.regpair->reg_5ghz_ctl | CTL_11A;
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
+		return reg->regpair->reg_2ghz_ctl;
+	case IEEE80211_BAND_5GHZ:
+		return reg->regpair->reg_5ghz_ctl;
+	default:
+		return NO_CTL;
+	}
 
-	return ctl;
+	return NO_CTL;
 }
+EXPORT_SYMBOL(ath_regd_get_band_ctl);
diff --git a/drivers/net/wireless/ath9k/regd.h b/drivers/net/wireless/ath/regd.h
index 9f5fbd4eea7..07291ccb23f 100644
--- a/drivers/net/wireless/ath9k/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -17,6 +17,25 @@
 #ifndef REGD_H
 #define REGD_H
 
+#include <linux/nl80211.h>
+
+#include <net/cfg80211.h>
+
+#define NO_CTL 0xff
+#define SD_NO_CTL               0xE0
+#define NO_CTL                  0xff
+#define CTL_MODE_M              7
+#define CTL_11A                 0
+#define CTL_11B                 1
+#define CTL_11G                 2
+#define CTL_2GHT20              5
+#define CTL_5GHT20              6
+#define CTL_2GHT40              7
+#define CTL_5GHT40              8
+
+#define CTRY_DEBUG 0x1ff
+#define CTRY_DEFAULT 0
+
 #define COUNTRY_ERD_FLAG        0x8000
 #define WORLDWIDE_ROAMING_FLAG  0x4000
 
@@ -40,7 +59,7 @@ struct country_code_to_enum_rd {
 	const char *isoName;
 };
 
-struct ath9k_regulatory {
+struct ath_regulatory {
 	char alpha2[2];
 	u16 country_code;
 	u16 max_power_level;
@@ -233,15 +252,14 @@ enum CountryCode {
 	CTRY_BELGIUM2 = 5002
 };
 
-bool ath9k_is_world_regd(struct ath_hw *ah);
-const struct ieee80211_regdomain *ath9k_world_regdomain(struct ath_hw *ah);
-const struct ieee80211_regdomain *ath9k_default_world_regdomain(void);
-void ath9k_reg_apply_world_flags(struct wiphy *wiphy,
-				 enum nl80211_reg_initiator initiator);
-void ath9k_reg_apply_radar_flags(struct wiphy *wiphy);
-int ath9k_regd_init(struct ath_hw *ah);
-bool ath9k_regd_is_eeprom_valid(struct ath_hw *ah);
-u32 ath9k_regd_get_ctl(struct ath_hw *ah, struct ath9k_channel *chan);
-int ath9k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request);
+bool ath_is_world_regd(struct ath_regulatory *reg);
+int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy,
+		  int (*reg_notifier)(struct wiphy *wiphy,
+		  struct regulatory_request *request));
+u32 ath_regd_get_band_ctl(struct ath_regulatory *reg,
+			  enum ieee80211_band band);
+int ath_reg_notifier_apply(struct wiphy *wiphy,
+			   struct regulatory_request *request,
+			   struct ath_regulatory *reg);
 
 #endif
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 4d0e298cd1c..4d0e298cd1c 100644
--- a/drivers/net/wireless/ath9k/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 27eef8fb710..291a94bd46f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -818,7 +818,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&priv->irqlock, flags);
 		spin_unlock_bh(&priv->timerlock);
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	frame_ctl = IEEE80211_FTYPE_DATA;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 77406245dc7..ddaa859c349 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -279,7 +279,7 @@ static int atmel_config(struct pcmcia_device *link)
 	struct pcmcia_device_id *did;
 
 	dev = link->priv;
-	did = handle_to_dev(link).driver_data;
+	did = dev_get_drvdata(&handle_to_dev(link));
 
 	DEBUG(0, "atmel_config(0x%p)\n", link);
 
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index aab71a70ba7..67f564e3722 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,7 +3,6 @@ config B43
 	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
-	select HW_RANDOM
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
 
@@ -99,11 +98,11 @@ config B43_LEDS
 	depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
 	default y
 
-# This config option automatically enables b43 RFKILL support,
-# if it's possible.
-config B43_RFKILL
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43_HWRNG
 	bool
-	depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43)
+	depends on B43 && (HW_RANDOM = y || HW_RANDOM = B43)
 	default y
 
 config B43_DEBUG
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 281ef831035..da379f4b0c3 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -13,7 +13,7 @@ b43-y				+= lo.o
 b43-y				+= wa.o
 b43-y				+= dma.o
 b43-$(CONFIG_B43_PIO)		+= pio.o
-b43-$(CONFIG_B43_RFKILL)	+= rfkill.o
+b43-y				+= rfkill.o
 b43-$(CONFIG_B43_LEDS)		+= leds.o
 b43-$(CONFIG_B43_PCMCIA)	+= pcmcia.o
 b43-$(CONFIG_B43_DEBUG)		+= debugfs.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index beaf18d6e8a..f580c2812d9 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -163,6 +163,7 @@ enum {
 #define B43_SHM_SH_WLCOREREV		0x0016	/* 802.11 core revision */
 #define B43_SHM_SH_PCTLWDPOS		0x0008
 #define B43_SHM_SH_RXPADOFF		0x0034	/* RX Padding data offset (PIO only) */
+#define B43_SHM_SH_FWCAPA		0x0042	/* Firmware capabilities (Opensource firmware only) */
 #define B43_SHM_SH_PHYVER		0x0050	/* PHY version */
 #define B43_SHM_SH_PHYTYPE		0x0052	/* PHY type */
 #define B43_SHM_SH_ANTSWAP		0x005C	/* Antenna swap threshold */
@@ -297,6 +298,10 @@ enum {
 #define B43_HF_MLADVW		0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */
 #define B43_HF_PR45960W		0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */
 
+/* Firmware capabilities field in SHM (Opensource firmware only) */
+#define B43_FWCAPA_HWCRYPTO	0x0001
+#define B43_FWCAPA_QOS		0x0002
+
 /* MacFilter offsets. */
 #define B43_MACFILTER_SELF		0x0000
 #define B43_MACFILTER_BSSID		0x0003
@@ -596,6 +601,13 @@ struct b43_wl {
 	/* Pointer to the ieee80211 hardware data structure */
 	struct ieee80211_hw *hw;
 
+	/* The number of queues that were registered with the mac80211 subsystem
+	 * initially. This is a backup copy of hw->queues in case hw->queues has
+	 * to be dynamically lowered at runtime (Firmware does not support QoS).
+	 * hw->queues has to be restored to the original value before unregistering
+	 * from the mac80211 subsystem. */
+	u16 mac80211_initially_registered_queues;
+
 	struct mutex mutex;
 	spinlock_t irq_lock;
 	/* R/W lock for data transmission.
@@ -625,12 +637,11 @@ struct b43_wl {
 	/* Stats about the wireless interface */
 	struct ieee80211_low_level_stats ieee_stats;
 
+#ifdef CONFIG_B43_HWRNG
 	struct hwrng rng;
-	u8 rng_initialized;
+	bool rng_initialized;
 	char rng_name[30 + 1];
-
-	/* The RF-kill button */
-	struct b43_rfkill rfkill;
+#endif /* CONFIG_B43_HWRNG */
 
 	/* List of all wireless devices on this chip */
 	struct list_head devlist;
@@ -750,6 +761,8 @@ struct b43_wldev {
 	bool dfq_valid;		/* Directed frame queue valid (IBSS PS mode, ATIM) */
 	bool radio_hw_enable;	/* saved state of radio hardware enabled state */
 	bool suspend_in_progress;	/* TRUE, if we are in a suspend/resume cycle */
+	bool qos_enabled;		/* TRUE, if QoS is used. */
+	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
 
 	/* PHY/Radio device. */
 	struct b43_phy phy;
@@ -776,8 +789,8 @@ struct b43_wldev {
 	/* Reason code of the last interrupt. */
 	u32 irq_reason;
 	u32 dma_reason[6];
-	/* saved irq enable/disable state bitfield. */
-	u32 irq_savedstate;
+	/* The currently active generic-interrupt mask. */
+	u32 irq_mask;
 	/* Link Quality calculation context. */
 	struct b43_noise_calculation noisecalc;
 	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index eae680b5305..7964cc32b25 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev,
 {
 	struct b43_dmaring *ring;
 
-	if (b43_modparam_qos) {
+	if (dev->qos_enabled) {
 		/* 0 = highest priority */
 		switch (queue_prio) {
 		default:
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 76f4c7bad8b..c8b317094c3 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -28,6 +28,7 @@
 
 #include "b43.h"
 #include "leds.h"
+#include "rfkill.h"
 
 
 static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
@@ -87,7 +88,7 @@ static void b43_led_brightness_set(struct led_classdev *led_dev,
 }
 
 static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
-			    const char *name, char *default_trigger,
+			    const char *name, const char *default_trigger,
 			    u8 led_index, bool activelow)
 {
 	int err;
@@ -164,10 +165,10 @@ static void b43_map_led(struct b43_wldev *dev,
 		snprintf(name, sizeof(name),
 			 "b43-%s::radio", wiphy_name(hw->wiphy));
 		b43_register_led(dev, &dev->led_radio, name,
-				 b43_rfkill_led_name(dev),
+				 ieee80211_get_radio_led_name(hw),
 				 led_index, activelow);
-		/* Sync the RF-kill LED state with the switch state. */
-		if (dev->radio_hw_enable)
+		/* Sync the RF-kill LED state with radio and switch states. */
+		if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
 			b43_led_turn_on(dev, led_index, activelow);
 		break;
 	case B43_LED_WEIRD:
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 79b685e300c..6456afebdba 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -80,8 +80,8 @@ static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
-int b43_modparam_qos = 1;
-module_param_named(qos, b43_modparam_qos, int, 0444);
+static int modparam_qos = 1;
+module_param_named(qos, modparam_qos, int, 0444);
 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
 
 static int modparam_btcoex = 1;
@@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev, u64 value)
 	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 }
 
+/* Read the firmware capabilities bitmask (Opensource firmware only) */
+static u16 b43_fwcapa_read(struct b43_wldev *dev)
+{
+	B43_WARN_ON(!dev->fw.opensource);
+	return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
+}
+
 void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
 {
 	u32 low, high;
@@ -673,32 +680,6 @@ static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 	b43_set_slot_time(dev, 20);
 }
 
-/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
-
-	return old_mask;
-}
-
-/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
-
-	return old_mask;
-}
-
 /* Synchronize IRQ top- and bottom-half.
  * IRQs must be masked before calling this.
  * This must not be called with the irq_lock held.
@@ -1593,7 +1574,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
 	/* This is the bottom half of the asynchronous beacon update. */
 
 	/* Ignore interrupt in the future. */
-	dev->irq_savedstate &= ~B43_IRQ_BEACON;
+	dev->irq_mask &= ~B43_IRQ_BEACON;
 
 	cmd = b43_read32(dev, B43_MMIO_MACCMD);
 	beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
@@ -1602,7 +1583,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
 	/* Schedule interrupt manually, if busy. */
 	if (beacon0_valid && beacon1_valid) {
 		b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
-		dev->irq_savedstate |= B43_IRQ_BEACON;
+		dev->irq_mask |= B43_IRQ_BEACON;
 		return;
 	}
 
@@ -1641,11 +1622,9 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
 	if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
 		spin_lock_irq(&wl->irq_lock);
 		/* update beacon right away or defer to irq */
-		dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 		handle_irq_beacon(dev);
 		/* The handler might have updated the IRQ mask. */
-		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
-			    dev->irq_savedstate);
+		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 		mmiowb();
 		spin_unlock_irq(&wl->irq_lock);
 	}
@@ -1879,7 +1858,7 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev)
 	if (reason & B43_IRQ_TX_OK)
 		handle_irq_transmit_status(dev);
 
-	b43_interrupt_enable(dev, dev->irq_savedstate);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	mmiowb();
 	spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
 }
@@ -1893,7 +1872,9 @@ static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
 	b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
 	b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
 	b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
+/* Unused ring
 	b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
+*/
 }
 
 /* Interrupt handler top-half */
@@ -1903,18 +1884,19 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
 	struct b43_wldev *dev = dev_id;
 	u32 reason;
 
-	if (!dev)
-		return IRQ_NONE;
+	B43_WARN_ON(!dev);
 
 	spin_lock(&dev->wl->irq_lock);
 
-	if (b43_status(dev) < B43_STAT_STARTED)
+	if (unlikely(b43_status(dev) < B43_STAT_STARTED)) {
+		/* This can only happen on shared IRQ lines. */
 		goto out;
+	}
 	reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
 	if (reason == 0xffffffff)	/* shared IRQ */
 		goto out;
 	ret = IRQ_HANDLED;
-	reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
+	reason &= dev->irq_mask;
 	if (!reason)
 		goto out;
 
@@ -1928,16 +1910,18 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
 	    & 0x0001DC00;
 	dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
 	    & 0x0000DC00;
+/* Unused ring
 	dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
 	    & 0x0000DC00;
+*/
 
 	b43_interrupt_ack(dev, reason);
 	/* disable all IRQs. They are enabled again in the bottom half. */
-	dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
 	/* save the reason code and call our bottom half. */
 	dev->irq_reason = reason;
 	tasklet_schedule(&dev->isr_tasklet);
-      out:
+out:
 	mmiowb();
 	spin_unlock(&dev->wl->irq_lock);
 
@@ -2330,12 +2314,34 @@ static int b43_upload_microcode(struct b43_wldev *dev)
 	dev->fw.patch = fwpatch;
 	dev->fw.opensource = (fwdate == 0xFFFF);
 
+	/* Default to use-all-queues. */
+	dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
+	dev->qos_enabled = !!modparam_qos;
+	/* Default to firmware/hardware crypto acceleration. */
+	dev->hwcrypto_enabled = 1;
+
 	if (dev->fw.opensource) {
+		u16 fwcapa;
+
 		/* Patchlevel info is encoded in the "time" field. */
 		dev->fw.patch = fwtime;
-		b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
-			dev->fw.rev, dev->fw.patch,
-			dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
+		b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
+			dev->fw.rev, dev->fw.patch);
+
+		fwcapa = b43_fwcapa_read(dev);
+		if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
+			b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
+			/* Disable hardware crypto and fall back to software crypto. */
+			dev->hwcrypto_enabled = 0;
+		}
+		if (!(fwcapa & B43_FWCAPA_QOS)) {
+			b43info(dev->wl, "QoS not supported by firmware\n");
+			/* Disable QoS. Tweak hw->queues to 1. It will be restored before
+			 * ieee80211_unregister to make sure the networking core can
+			 * properly free possible resources. */
+			dev->wl->hw->queues = 1;
+			dev->qos_enabled = 0;
+		}
 	} else {
 		b43info(dev->wl, "Loading firmware version %u.%u "
 			"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
@@ -2980,6 +2986,7 @@ static void b43_security_init(struct b43_wldev *dev)
 	b43_clear_keys(dev);
 }
 
+#ifdef CONFIG_B43_HWRNG
 static int b43_rng_read(struct hwrng *rng, u32 *data)
 {
 	struct b43_wl *wl = (struct b43_wl *)rng->priv;
@@ -2995,17 +3002,21 @@ static int b43_rng_read(struct hwrng *rng, u32 *data)
 
 	return (sizeof(u16));
 }
+#endif /* CONFIG_B43_HWRNG */
 
 static void b43_rng_exit(struct b43_wl *wl)
 {
+#ifdef CONFIG_B43_HWRNG
 	if (wl->rng_initialized)
 		hwrng_unregister(&wl->rng);
+#endif /* CONFIG_B43_HWRNG */
 }
 
 static int b43_rng_init(struct b43_wl *wl)
 {
-	int err;
+	int err = 0;
 
+#ifdef CONFIG_B43_HWRNG
 	snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
 		 "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
 	wl->rng.name = wl->rng_name;
@@ -3018,6 +3029,7 @@ static int b43_rng_init(struct b43_wl *wl)
 		b43err(wl, "Failed to register the random "
 		       "number generator (%d)\n", err);
 	}
+#endif /* CONFIG_B43_HWRNG */
 
 	return err;
 }
@@ -3485,14 +3497,9 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (phy->ops->set_rx_antenna)
 		phy->ops->set_rx_antenna(dev, antenna);
 
-	/* Update templates for AP/mesh mode. */
-	if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
-	    b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
-		b43_set_beacon_int(dev, conf->beacon_int);
-
 	if (!!conf->radio_enabled != phy->radio_on) {
 		if (conf->radio_enabled) {
-			b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
+			b43_software_rfkill(dev, false);
 			b43info(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable) {
 				b43info(dev->wl, "The hardware RF-kill button "
@@ -3500,7 +3507,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 					"Press the button to turn it on.\n");
 			}
 		} else {
-			b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+			b43_software_rfkill(dev, true);
 			b43info(dev->wl, "Radio turned off by software\n");
 		}
 	}
@@ -3565,14 +3572,45 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
+	unsigned long flags;
 
 	mutex_lock(&wl->mutex);
 
 	dev = wl->current_dev;
 	if (!dev || b43_status(dev) < B43_STAT_STARTED)
 		goto out_unlock_mutex;
+
+	B43_WARN_ON(wl->vif != vif);
+
+	spin_lock_irqsave(&wl->irq_lock, flags);
+	if (changed & BSS_CHANGED_BSSID) {
+		if (conf->bssid)
+			memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+		else
+			memset(wl->bssid, 0, ETH_ALEN);
+	}
+
+	if (b43_status(dev) >= B43_STAT_INITIALIZED) {
+		if (changed & BSS_CHANGED_BEACON &&
+		    (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+		     b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
+		     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+			b43_update_templates(wl);
+
+		if (changed & BSS_CHANGED_BSSID)
+			b43_write_mac_bssid_templates(dev);
+	}
+	spin_unlock_irqrestore(&wl->irq_lock, flags);
+
 	b43_mac_suspend(dev);
 
+	/* Update templates for AP/mesh mode. */
+	if (changed & BSS_CHANGED_BEACON_INT &&
+	    (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+	     b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
+	     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+		b43_set_beacon_int(dev, conf->beacon_int);
+
 	if (changed & BSS_CHANGED_BASIC_RATES)
 		b43_update_basic_rates(dev, conf->basic_rates);
 
@@ -3586,8 +3624,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 	b43_mac_enable(dev);
 out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
-
-	return;
 }
 
 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -3620,7 +3656,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
 		goto out_unlock;
 
-	if (dev->fw.pcm_request_failed) {
+	if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
 		/* We don't have firmware for the crypto engine.
 		 * Must use software-crypto. */
 		err = -EOPNOTSUPP;
@@ -3630,7 +3666,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	err = -EINVAL;
 	switch (key->alg) {
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			algorithm = B43_SEC_ALGO_WEP40;
 		else
 			algorithm = B43_SEC_ALGO_WEP104;
@@ -3745,41 +3781,6 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw,
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 }
 
-static int b43_op_config_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_vif *vif,
-				   struct ieee80211_if_conf *conf)
-{
-	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev = wl->current_dev;
-	unsigned long flags;
-
-	if (!dev)
-		return -ENODEV;
-	mutex_lock(&wl->mutex);
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	B43_WARN_ON(wl->vif != vif);
-	if (conf->bssid)
-		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
-	else
-		memset(wl->bssid, 0, ETH_ALEN);
-	if (b43_status(dev) >= B43_STAT_INITIALIZED) {
-		if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
-		    b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
-			B43_WARN_ON(vif->type != wl->if_type);
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43_update_templates(wl);
-		} else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43_update_templates(wl);
-		}
-		b43_write_mac_bssid_templates(dev);
-	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	mutex_unlock(&wl->mutex);
-
-	return 0;
-}
-
 /* Locking: wl->mutex */
 static void b43_wireless_core_stop(struct b43_wldev *dev)
 {
@@ -3793,7 +3794,7 @@ static void b43_wireless_core_stop(struct b43_wldev *dev)
 	 * setting the status to INITIALIZED, as the interrupt handler
 	 * won't care about IRQs then. */
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
 	b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* flush */
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 	b43_synchronize_irq(dev);
@@ -3834,7 +3835,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
 
 	/* Start data flow (TX/RX). */
 	b43_mac_enable(dev);
-	b43_interrupt_enable(dev, dev->irq_savedstate);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 
 	/* Start maintainance work */
 	b43_periodic_tasks_setup(dev);
@@ -3997,9 +3998,9 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev)
 	/* IRQ related flags */
 	dev->irq_reason = 0;
 	memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
-	dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
+	dev->irq_mask = B43_IRQ_MASKTEMPLATE;
 	if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
-		dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR;
+		dev->irq_mask &= ~B43_IRQ_PHY_TXERR;
 
 	dev->mac_suspended = 1;
 
@@ -4326,7 +4327,6 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	struct b43_wldev *dev = wl->current_dev;
 	int did_init = 0;
 	int err = 0;
-	bool do_rfkill_exit = 0;
 
 	/* Kill all old instance specific information to make sure
 	 * the card won't use it in the short timeframe between start
@@ -4340,18 +4340,12 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
 
-	/* First register RFkill.
-	 * LEDs that are registered later depend on it. */
-	b43_rfkill_init(dev);
-
 	mutex_lock(&wl->mutex);
 
 	if (b43_status(dev) < B43_STAT_INITIALIZED) {
 		err = b43_wireless_core_init(dev);
-		if (err) {
-			do_rfkill_exit = 1;
+		if (err)
 			goto out_mutex_unlock;
-		}
 		did_init = 1;
 	}
 
@@ -4360,17 +4354,16 @@ static int b43_op_start(struct ieee80211_hw *hw)
 		if (err) {
 			if (did_init)
 				b43_wireless_core_exit(dev);
-			do_rfkill_exit = 1;
 			goto out_mutex_unlock;
 		}
 	}
 
+	/* XXX: only do if device doesn't support rfkill irq */
+	wiphy_rfkill_start_polling(hw->wiphy);
+
  out_mutex_unlock:
 	mutex_unlock(&wl->mutex);
 
-	if (do_rfkill_exit)
-		b43_rfkill_exit(dev);
-
 	return err;
 }
 
@@ -4379,7 +4372,6 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev = wl->current_dev;
 
-	b43_rfkill_exit(dev);
 	cancel_work_sync(&(wl->beacon_update_trigger));
 
 	mutex_lock(&wl->mutex);
@@ -4449,7 +4441,6 @@ static const struct ieee80211_ops b43_hw_ops = {
 	.remove_interface	= b43_op_remove_interface,
 	.config			= b43_op_config,
 	.bss_info_changed	= b43_op_bss_info_changed,
-	.config_interface	= b43_op_config_interface,
 	.configure_filter	= b43_op_configure_filter,
 	.set_key		= b43_op_set_key,
 	.get_stats		= b43_op_get_stats,
@@ -4462,6 +4453,7 @@ static const struct ieee80211_ops b43_hw_ops = {
 	.sta_notify		= b43_op_sta_notify,
 	.sw_scan_start		= b43_op_sw_scan_start_notifier,
 	.sw_scan_complete	= b43_op_sw_scan_complete_notifier,
+	.rfkill_poll		= b43_rfkill_poll,
 };
 
 /* Hard-reset the chip. Do not call this directly.
@@ -4764,6 +4756,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 		b43err(NULL, "Could not allocate ieee80211 device\n");
 		goto out;
 	}
+	wl = hw_to_b43_wl(hw);
 
 	/* fill hw info */
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
@@ -4777,7 +4770,8 @@ static int b43_wireless_init(struct ssb_device *dev)
 		BIT(NL80211_IFTYPE_WDS) |
 		BIT(NL80211_IFTYPE_ADHOC);
 
-	hw->queues = b43_modparam_qos ? 4 : 1;
+	hw->queues = modparam_qos ? 4 : 1;
+	wl->mac80211_initially_registered_queues = hw->queues;
 	hw->max_rates = 2;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))
@@ -4785,9 +4779,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 	else
 		SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
 
-	/* Get and initialize struct b43_wl */
-	wl = hw_to_b43_wl(hw);
-	memset(wl, 0, sizeof(*wl));
+	/* Initialize struct b43_wl */
 	wl->hw = hw;
 	spin_lock_init(&wl->irq_lock);
 	rwlock_init(&wl->tx_lock);
@@ -4853,8 +4845,13 @@ static void b43_remove(struct ssb_device *dev)
 	cancel_work_sync(&wldev->restart_work);
 
 	B43_WARN_ON(!wl);
-	if (wl->current_dev == wldev)
+	if (wl->current_dev == wldev) {
+		/* Restore the queues count before unregistering, because firmware detect
+		 * might have modified it. Restoring is important, so the networking
+		 * stack can properly free resources. */
+		wl->hw->queues = wl->mac80211_initially_registered_queues;
 		ieee80211_unregister_hw(wl->hw);
+	}
 
 	b43_one_core_detach(dev);
 
@@ -4949,7 +4946,7 @@ static struct ssb_driver b43_ssb_driver = {
 static void b43_print_driverinfo(void)
 {
 	const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
-		   *feat_leds = "", *feat_rfkill = "";
+		   *feat_leds = "";
 
 #ifdef CONFIG_B43_PCI_AUTOSELECT
 	feat_pci = "P";
@@ -4963,14 +4960,11 @@ static void b43_print_driverinfo(void)
 #ifdef CONFIG_B43_LEDS
 	feat_leds = "L";
 #endif
-#ifdef CONFIG_B43_RFKILL
-	feat_rfkill = "R";
-#endif
 	printk(KERN_INFO "Broadcom 43xx driver loaded "
-	       "[ Features: %s%s%s%s%s, Firmware-ID: "
+	       "[ Features: %s%s%s%s, Firmware-ID: "
 	       B43_SUPPORTED_FIRMWARE_ID " ]\n",
 	       feat_pci, feat_pcmcia, feat_nphy,
-	       feat_leds, feat_rfkill);
+	       feat_leds);
 }
 
 static int __init b43_init(void)
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 40abcf5d1b4..950fb1b0546 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -39,7 +39,6 @@
 #define PAD_BYTES(nr_bytes)		P4D_BYTES( __LINE__ , (nr_bytes))
 
 
-extern int b43_modparam_qos;
 extern int b43_modparam_verbose;
 
 /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index c836c077d51..816e028a262 100644
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -480,11 +480,11 @@ static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev)
 }
 
 static void b43_aphy_op_software_rfkill(struct b43_wldev *dev,
-					enum rfkill_state state)
+					bool blocked)
 {
 	struct b43_phy *phy = &dev->phy;
 
-	if (state == RFKILL_STATE_UNBLOCKED) {
+	if (!blocked) {
 		if (phy->radio_on)
 			return;
 		b43_radio_write16(dev, 0x0004, 0x00C0);
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index e176b6e0d9c..6d241622210 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -84,7 +84,7 @@ int b43_phy_init(struct b43_wldev *dev)
 
 	phy->channel = ops->get_default_chan(dev);
 
-	ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
+	ops->software_rfkill(dev, false);
 	err = ops->init(dev);
 	if (err) {
 		b43err(dev->wl, "PHY init failed\n");
@@ -104,7 +104,7 @@ err_phy_exit:
 	if (ops->exit)
 		ops->exit(dev);
 err_block_rf:
-	ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+	ops->software_rfkill(dev, true);
 
 	return err;
 }
@@ -113,7 +113,7 @@ void b43_phy_exit(struct b43_wldev *dev)
 {
 	const struct b43_phy_operations *ops = dev->phy.ops;
 
-	ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+	ops->software_rfkill(dev, true);
 	if (ops->exit)
 		ops->exit(dev);
 }
@@ -295,18 +295,13 @@ err_restore_cookie:
 	return err;
 }
 
-void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state)
+void b43_software_rfkill(struct b43_wldev *dev, bool blocked)
 {
 	struct b43_phy *phy = &dev->phy;
 
-	if (state == RFKILL_STATE_HARD_BLOCKED) {
-		/* We cannot hardware-block the device */
-		state = RFKILL_STATE_SOFT_BLOCKED;
-	}
-
 	b43_mac_suspend(dev);
-	phy->ops->software_rfkill(dev, state);
-	phy->radio_on = (state == RFKILL_STATE_UNBLOCKED);
+	phy->ops->software_rfkill(dev, blocked);
+	phy->radio_on = !blocked;
 	b43_mac_enable(dev);
 }
 
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index b2d99101947..44cc918e4fc 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -1,7 +1,7 @@
 #ifndef LINUX_B43_PHY_COMMON_H_
 #define LINUX_B43_PHY_COMMON_H_
 
-#include <linux/rfkill.h>
+#include <linux/types.h>
 
 struct b43_wldev;
 
@@ -159,7 +159,7 @@ struct b43_phy_operations {
 
 	/* Radio */
 	bool (*supports_hwpctl)(struct b43_wldev *dev);
-	void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+	void (*software_rfkill)(struct b43_wldev *dev, bool blocked);
 	void (*switch_analog)(struct b43_wldev *dev, bool on);
 	int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
 	unsigned int (*get_default_chan)(struct b43_wldev *dev);
@@ -364,7 +364,7 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel);
 /**
  * b43_software_rfkill - Turn the radio ON or OFF in software.
  */
-void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state);
+void b43_software_rfkill(struct b43_wldev *dev, bool blocked);
 
 /**
  * b43_phy_txpower_check - Check TX power output.
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index e7b98f013b0..5300232449f 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -2592,7 +2592,7 @@ static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev)
 }
 
 static void b43_gphy_op_software_rfkill(struct b43_wldev *dev,
-					enum rfkill_state state)
+					bool blocked)
 {
 	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_g *gphy = phy->g;
@@ -2600,7 +2600,7 @@ static void b43_gphy_op_software_rfkill(struct b43_wldev *dev,
 
 	might_sleep();
 
-	if (state == RFKILL_STATE_UNBLOCKED) {
+	if (!blocked) {
 		/* Turn radio ON */
 		if (phy->radio_on)
 			return;
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 58e319d6b1e..ea0d3a3a6a6 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -488,7 +488,7 @@ static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 }
 
 static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
-					 enum rfkill_state state)
+					 bool blocked)
 {
 	//TODO
 }
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8bcfda5f3f0..be7b5604947 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -579,7 +579,7 @@ static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 }
 
 static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
-					enum rfkill_state state)
+					bool blocked)
 {//TODO
 }
 
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 8cd9776752e..69138e8c1db 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev,
 {
 	struct b43_pio_txqueue *q;
 
-	if (b43_modparam_qos) {
+	if (dev->qos_enabled) {
 		/* 0 = highest priority */
 		switch (queue_prio) {
 		default:
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index afad4235869..31e55999893 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -22,15 +22,11 @@
 
 */
 
-#include "rfkill.h"
 #include "b43.h"
-#include "phy_common.h"
-
-#include <linux/kmod.h>
 
 
 /* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
+bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 {
 	if (dev->phy.rev >= 3) {
 		if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
@@ -45,166 +41,39 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 }
 
 /* The poll callback for the hardware button. */
-static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
+void b43_rfkill_poll(struct ieee80211_hw *hw)
 {
-	struct b43_wldev *dev = poll_dev->private;
-	struct b43_wl *wl = dev->wl;
+	struct b43_wl *wl = hw_to_b43_wl(hw);
+	struct b43_wldev *dev = wl->current_dev;
+	struct ssb_bus *bus = dev->dev->bus;
 	bool enabled;
-	bool report_change = 0;
+	bool brought_up = false;
 
 	mutex_lock(&wl->mutex);
 	if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) {
-		mutex_unlock(&wl->mutex);
-		return;
+		if (ssb_bus_powerup(bus, 0)) {
+			mutex_unlock(&wl->mutex);
+			return;
+		}
+		ssb_device_enable(dev->dev, 0);
+		brought_up = true;
 	}
+
 	enabled = b43_is_hw_radio_enabled(dev);
+
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
-		report_change = 1;
 		b43info(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
+		wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+		if (enabled != dev->phy.radio_on)
+			b43_software_rfkill(dev, !enabled);
 	}
-	mutex_unlock(&wl->mutex);
 
-	/* send the radio switch event to the system - note both a key press
-	 * and a release are required */
-	if (unlikely(report_change)) {
-		input_report_key(poll_dev->input, KEY_WLAN, 1);
-		input_report_key(poll_dev->input, KEY_WLAN, 0);
+	if (brought_up) {
+		ssb_device_disable(dev->dev, 0);
+		ssb_bus_may_powerdown(bus);
 	}
-}
-
-/* Called when the RFKILL toggled in software. */
-static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
-{
-	struct b43_wldev *dev = data;
-	struct b43_wl *wl = dev->wl;
-	int err = -EBUSY;
 
-	if (!wl->rfkill.registered)
-		return 0;
-
-	mutex_lock(&wl->mutex);
-	if (b43_status(dev) < B43_STAT_INITIALIZED)
-		goto out_unlock;
-	err = 0;
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (!dev->radio_hw_enable) {
-			/* No luck. We can't toggle the hardware RF-kill
-			 * button from software. */
-			err = -EBUSY;
-			goto out_unlock;
-		}
-		if (!dev->phy.radio_on)
-			b43_software_rfkill(dev, state);
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		if (dev->phy.radio_on)
-			b43_software_rfkill(dev, state);
-		break;
-	default:
-		b43warn(wl, "Received unexpected rfkill state %d.\n", state);
-		break;
-	}
-out_unlock:
 	mutex_unlock(&wl->mutex);
-
-	return err;
-}
-
-char *b43_rfkill_led_name(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return NULL;
-	return rfkill_get_led_name(rfk->rfkill);
-}
-
-void b43_rfkill_init(struct b43_wldev *dev)
-{
-	struct b43_wl *wl = dev->wl;
-	struct b43_rfkill *rfk = &(wl->rfkill);
-	int err;
-
-	rfk->registered = 0;
-
-	rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
-	if (!rfk->rfkill)
-		goto out_error;
-	snprintf(rfk->name, sizeof(rfk->name),
-		 "b43-%s", wiphy_name(wl->hw->wiphy));
-	rfk->rfkill->name = rfk->name;
-	rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-	rfk->rfkill->data = dev;
-	rfk->rfkill->toggle_radio = b43_rfkill_soft_toggle;
-	rfk->rfkill->user_claim_unsupported = 1;
-
-	rfk->poll_dev = input_allocate_polled_device();
-	if (!rfk->poll_dev) {
-		rfkill_free(rfk->rfkill);
-		goto err_freed_rfk;
-	}
-
-	rfk->poll_dev->private = dev;
-	rfk->poll_dev->poll = b43_rfkill_poll;
-	rfk->poll_dev->poll_interval = 1000; /* msecs */
-
-	rfk->poll_dev->input->name = rfk->name;
-	rfk->poll_dev->input->id.bustype = BUS_HOST;
-	rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
-	rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
-
-	err = rfkill_register(rfk->rfkill);
-	if (err)
-		goto err_free_polldev;
-
-#ifdef CONFIG_RFKILL_INPUT_MODULE
-	/* B43 RF-kill isn't useful without the rfkill-input subsystem.
-	 * Try to load the module. */
-	err = request_module("rfkill-input");
-	if (err)
-		b43warn(wl, "Failed to load the rfkill-input module. "
-			"The built-in radio LED will not work.\n");
-#endif /* CONFIG_RFKILL_INPUT */
-
-#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE)
-	b43warn(wl, "The rfkill-input subsystem is not available. "
-		"The built-in radio LED will not work.\n");
-#endif
-
-	err = input_register_polled_device(rfk->poll_dev);
-	if (err)
-		goto err_unreg_rfk;
-
-	rfk->registered = 1;
-
-	return;
-err_unreg_rfk:
-	rfkill_unregister(rfk->rfkill);
-err_free_polldev:
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-err_freed_rfk:
-	rfk->rfkill = NULL;
-out_error:
-	rfk->registered = 0;
-	b43warn(wl, "RF-kill button init failed\n");
-}
-
-void b43_rfkill_exit(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return;
-	rfk->registered = 0;
-
-	input_unregister_polled_device(rfk->poll_dev);
-	rfkill_unregister(rfk->rfkill);
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-	rfk->rfkill = NULL;
 }
diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h
index adacf936d81..f046c3ca051 100644
--- a/drivers/net/wireless/b43/rfkill.h
+++ b/drivers/net/wireless/b43/rfkill.h
@@ -1,52 +1,11 @@
 #ifndef B43_RFKILL_H_
 #define B43_RFKILL_H_
 
+struct ieee80211_hw;
 struct b43_wldev;
 
+void b43_rfkill_poll(struct ieee80211_hw *hw);
 
-#ifdef CONFIG_B43_RFKILL
-
-#include <linux/rfkill.h>
-#include <linux/input-polldev.h>
-
-
-struct b43_rfkill {
-	/* The RFKILL subsystem data structure */
-	struct rfkill *rfkill;
-	/* The poll device for the RFKILL input button */
-	struct input_polled_dev *poll_dev;
-	/* Did initialization succeed? Used for freeing. */
-	bool registered;
-	/* The unique name of this rfkill switch */
-	char name[sizeof("b43-phy4294967295")];
-};
-
-/* The init function returns void, because we are not interested
- * in failing the b43 init process when rfkill init failed. */
-void b43_rfkill_init(struct b43_wldev *dev);
-void b43_rfkill_exit(struct b43_wldev *dev);
-
-char * b43_rfkill_led_name(struct b43_wldev *dev);
-
-
-#else /* CONFIG_B43_RFKILL */
-/* No RFKILL support. */
-
-struct b43_rfkill {
-	/* empty */
-};
-
-static inline void b43_rfkill_init(struct b43_wldev *dev)
-{
-}
-static inline void b43_rfkill_exit(struct b43_wldev *dev)
-{
-}
-static inline char * b43_rfkill_led_name(struct b43_wldev *dev)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_B43_RFKILL */
+bool b43_is_hw_radio_enabled(struct b43_wldev *dev);
 
 #endif /* B43_RFKILL_H_ */
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index a63d88841df..55f36a7254d 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -118,7 +118,6 @@ u8 b43_plcp_get_ratecode_ofdm(const u8 bitrate)
 void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
 			   const u16 octets, const u8 bitrate)
 {
-	__le32 *data = &(plcp->data);
 	__u8 *raw = plcp->raw;
 
 	if (b43_is_ofdm_rate(bitrate)) {
@@ -127,7 +126,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
 		d = b43_plcp_get_ratecode_ofdm(bitrate);
 		B43_WARN_ON(octets & 0xF000);
 		d |= (octets << 5);
-		*data = cpu_to_le32(d);
+		plcp->data = cpu_to_le32(d);
 	} else {
 		u32 plen;
 
@@ -141,7 +140,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
 				raw[1] = 0x04;
 		} else
 			raw[1] = 0x04;
-		*data |= cpu_to_le32(plen << 16);
+		plcp->data |= cpu_to_le32(plen << 16);
 		raw[0] = b43_plcp_get_ratecode_cck(bitrate);
 	}
 }
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index aef2298d37a..94a46347805 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -3,7 +3,6 @@ config B43LEGACY
 	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
-	select HW_RANDOM
 	---help---
 	  b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
 	  BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
@@ -43,12 +42,11 @@ config B43LEGACY_LEDS
 	depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY)
 	default y
 
-# RFKILL support
-# This config option automatically enables b43legacy RFKILL support,
-# if it's possible.
-config B43LEGACY_RFKILL
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43LEGACY_HWRNG
 	bool
-	depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43LEGACY)
+	depends on B43LEGACY && (HW_RANDOM = y || HW_RANDOM = B43LEGACY)
 	default y
 
 config B43LEGACY_DEBUG
diff --git a/drivers/net/wireless/b43legacy/Makefile b/drivers/net/wireless/b43legacy/Makefile
index 80cdb73bd14..227a77e8436 100644
--- a/drivers/net/wireless/b43legacy/Makefile
+++ b/drivers/net/wireless/b43legacy/Makefile
@@ -6,7 +6,7 @@ b43legacy-y				+= radio.o
 b43legacy-y				+= sysfs.o
 b43legacy-y				+= xmit.o
 # b43 RFKILL button support
-b43legacy-$(CONFIG_B43LEGACY_RFKILL)	+= rfkill.o
+b43legacy-y				+= rfkill.o
 # b43legacy LED support
 b43legacy-$(CONFIG_B43LEGACY_LEDS)	+= leds.o
 # b43legacy debugging
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 97b0e06dfe2..77fda148ac4 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -59,7 +59,8 @@
 #define B43legacy_MMIO_XMITSTAT_1		0x174
 #define B43legacy_MMIO_REV3PLUS_TSF_LOW	0x180 /* core rev >= 3 only */
 #define B43legacy_MMIO_REV3PLUS_TSF_HIGH	0x184 /* core rev >= 3 only */
-
+#define B43legacy_MMIO_TSF_CFP_REP	0x188
+#define B43legacy_MMIO_TSF_CFP_START	0x18C
 /* 32-bit DMA */
 #define B43legacy_MMIO_DMA32_BASE0	0x200
 #define B43legacy_MMIO_DMA32_BASE1	0x220
@@ -258,7 +259,6 @@
 
 #define B43legacy_IRQ_ALL		0xFFFFFFFF
 #define B43legacy_IRQ_MASKTEMPLATE	(B43legacy_IRQ_MAC_SUSPENDED |	\
-					 B43legacy_IRQ_BEACON |		\
 					 B43legacy_IRQ_TBTT_INDI |	\
 					 B43legacy_IRQ_ATIM_END |	\
 					 B43legacy_IRQ_PMQ |		\
@@ -596,12 +596,11 @@ struct b43legacy_wl {
 	/* Stats about the wireless interface */
 	struct ieee80211_low_level_stats ieee_stats;
 
+#ifdef CONFIG_B43LEGACY_HWRNG
 	struct hwrng rng;
 	u8 rng_initialized;
 	char rng_name[30 + 1];
-
-	/* The RF-kill button */
-	struct b43legacy_rfkill rfkill;
+#endif
 
 	/* List of all wireless devices on this chip */
 	struct list_head devlist;
@@ -614,6 +613,8 @@ struct b43legacy_wl {
 	struct sk_buff *current_beacon;
 	bool beacon0_uploaded;
 	bool beacon1_uploaded;
+	bool beacon_templates_virgin; /* Never wrote the templates? */
+	struct work_struct beacon_update_trigger;
 };
 
 /* Pointers to the firmware data and meta information about it. */
@@ -690,8 +691,8 @@ struct b43legacy_wldev {
 	/* Reason code of the last interrupt. */
 	u32 irq_reason;
 	u32 dma_reason[6];
-	/* saved irq enable/disable state bitfield. */
-	u32 irq_savedstate;
+	/* The currently active generic-interrupt mask. */
+	u32 irq_mask;
 	/* Link Quality calculation context. */
 	struct b43legacy_noise_calculation noisecalc;
 	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
diff --git a/drivers/net/wireless/b43legacy/leds.c b/drivers/net/wireless/b43legacy/leds.c
index 3ea55b18c70..37e9be89356 100644
--- a/drivers/net/wireless/b43legacy/leds.c
+++ b/drivers/net/wireless/b43legacy/leds.c
@@ -28,6 +28,7 @@
 
 #include "b43legacy.h"
 #include "leds.h"
+#include "rfkill.h"
 
 
 static void b43legacy_led_turn_on(struct b43legacy_wldev *dev, u8 led_index,
@@ -86,7 +87,8 @@ static void b43legacy_led_brightness_set(struct led_classdev *led_dev,
 
 static int b43legacy_register_led(struct b43legacy_wldev *dev,
 				  struct b43legacy_led *led,
-				  const char *name, char *default_trigger,
+				  const char *name,
+				  const char *default_trigger,
 				  u8 led_index, bool activelow)
 {
 	int err;
@@ -163,10 +165,10 @@ static void b43legacy_map_led(struct b43legacy_wldev *dev,
 		snprintf(name, sizeof(name),
 			 "b43legacy-%s::radio", wiphy_name(hw->wiphy));
 		b43legacy_register_led(dev, &dev->led_radio, name,
-				 b43legacy_rfkill_led_name(dev),
+				 ieee80211_get_radio_led_name(hw),
 				 led_index, activelow);
-		/* Sync the RF-kill LED state with the switch state. */
-		if (dev->radio_hw_enable)
+		/* Sync the RF-kill LED state with radio and switch states. */
+		if (dev->phy.radio_on && b43legacy_is_hw_radio_enabled(dev))
 			b43legacy_led_turn_on(dev, led_index, activelow);
 		break;
 	case B43legacy_LED_WEIRD:
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 879edc78671..e5136fb65dd 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -583,35 +583,6 @@ static void b43legacy_short_slot_timing_disable(struct b43legacy_wldev *dev)
 	b43legacy_set_slot_time(dev, 20);
 }
 
-/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43legacy_interrupt_enable(struct b43legacy_wldev *dev,
-					     u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
-	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, old_mask |
-			  mask);
-
-	return old_mask;
-}
-
-/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43legacy_interrupt_disable(struct b43legacy_wldev *dev,
-					      u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
-	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
-
-	return old_mask;
-}
-
 /* Synchronize IRQ top- and bottom-half.
  * IRQs must be masked before calling this.
  * This must not be called with the irq_lock held.
@@ -955,23 +926,54 @@ static void b43legacy_write_template_common(struct b43legacy_wldev *dev,
 			      size + sizeof(struct b43legacy_plcp_hdr6));
 }
 
+/* Convert a b43legacy antenna number value to the PHY TX control value. */
+static u16 b43legacy_antenna_to_phyctl(int antenna)
+{
+	switch (antenna) {
+	case B43legacy_ANTENNA0:
+		return B43legacy_TX4_PHY_ANT0;
+	case B43legacy_ANTENNA1:
+		return B43legacy_TX4_PHY_ANT1;
+	}
+	return B43legacy_TX4_PHY_ANTLAST;
+}
+
 static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
 					    u16 ram_offset,
-					    u16 shm_size_offset, u8 rate)
+					    u16 shm_size_offset)
 {
 
 	unsigned int i, len, variable_len;
 	const struct ieee80211_mgmt *bcn;
 	const u8 *ie;
 	bool tim_found = 0;
+	unsigned int rate;
+	u16 ctl;
+	int antenna;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
 
 	bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
 	len = min((size_t)dev->wl->current_beacon->len,
 		  0x200 - sizeof(struct b43legacy_plcp_hdr6));
+	rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
 
 	b43legacy_write_template_common(dev, (const u8 *)bcn, len, ram_offset,
 					shm_size_offset, rate);
 
+	/* Write the PHY TX control parameters. */
+	antenna = B43legacy_ANTENNA_DEFAULT;
+	antenna = b43legacy_antenna_to_phyctl(antenna);
+	ctl = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
+				   B43legacy_SHM_SH_BEACPHYCTL);
+	/* We can't send beacons with short preamble. Would get PHY errors. */
+	ctl &= ~B43legacy_TX4_PHY_SHORTPRMBL;
+	ctl &= ~B43legacy_TX4_PHY_ANT;
+	ctl &= ~B43legacy_TX4_PHY_ENC;
+	ctl |= antenna;
+	ctl |= B43legacy_TX4_PHY_ENC_CCK;
+	b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
+			      B43legacy_SHM_SH_BEACPHYCTL, ctl);
+
 	/* Find the position of the TIM and the DTIM_period value
 	 * and write them to SHM. */
 	ie = bcn->u.beacon.variable;
@@ -1013,7 +1015,8 @@ static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
 		b43legacywarn(dev->wl, "Did not find a valid TIM IE in the "
 			      "beacon template packet. AP or IBSS operation "
 			      "may be broken.\n");
-	}
+	} else
+		b43legacydbg(dev->wl, "Updated beacon template\n");
 }
 
 static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev,
@@ -1025,7 +1028,7 @@ static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev,
 	__le16 dur;
 
 	plcp.data = 0;
-	b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->bitrate);
+	b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
 	dur = ieee80211_generic_frame_duration(dev->wl->hw,
 					       dev->wl->vif,
 					       size,
@@ -1129,10 +1132,103 @@ static void b43legacy_write_probe_resp_template(struct b43legacy_wldev *dev,
 		   0x200 - sizeof(struct b43legacy_plcp_hdr6));
 	b43legacy_write_template_common(dev, probe_resp_data,
 					size, ram_offset,
-					shm_size_offset, rate->bitrate);
+					shm_size_offset, rate->hw_value);
 	kfree(probe_resp_data);
 }
 
+static void b43legacy_upload_beacon0(struct b43legacy_wldev *dev)
+{
+	struct b43legacy_wl *wl = dev->wl;
+
+	if (wl->beacon0_uploaded)
+		return;
+	b43legacy_write_beacon_template(dev, 0x68, 0x18);
+	/* FIXME: Probe resp upload doesn't really belong here,
+	 *        but we don't use that feature anyway. */
+	b43legacy_write_probe_resp_template(dev, 0x268, 0x4A,
+				      &__b43legacy_ratetable[3]);
+	wl->beacon0_uploaded = 1;
+}
+
+static void b43legacy_upload_beacon1(struct b43legacy_wldev *dev)
+{
+	struct b43legacy_wl *wl = dev->wl;
+
+	if (wl->beacon1_uploaded)
+		return;
+	b43legacy_write_beacon_template(dev, 0x468, 0x1A);
+	wl->beacon1_uploaded = 1;
+}
+
+static void handle_irq_beacon(struct b43legacy_wldev *dev)
+{
+	struct b43legacy_wl *wl = dev->wl;
+	u32 cmd, beacon0_valid, beacon1_valid;
+
+	if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
+		return;
+
+	/* This is the bottom half of the asynchronous beacon update. */
+
+	/* Ignore interrupt in the future. */
+	dev->irq_mask &= ~B43legacy_IRQ_BEACON;
+
+	cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+	beacon0_valid = (cmd & B43legacy_MACCMD_BEACON0_VALID);
+	beacon1_valid = (cmd & B43legacy_MACCMD_BEACON1_VALID);
+
+	/* Schedule interrupt manually, if busy. */
+	if (beacon0_valid && beacon1_valid) {
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, B43legacy_IRQ_BEACON);
+		dev->irq_mask |= B43legacy_IRQ_BEACON;
+		return;
+	}
+
+	if (unlikely(wl->beacon_templates_virgin)) {
+		/* We never uploaded a beacon before.
+		 * Upload both templates now, but only mark one valid. */
+		wl->beacon_templates_virgin = 0;
+		b43legacy_upload_beacon0(dev);
+		b43legacy_upload_beacon1(dev);
+		cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+		cmd |= B43legacy_MACCMD_BEACON0_VALID;
+		b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+	} else {
+		if (!beacon0_valid) {
+			b43legacy_upload_beacon0(dev);
+			cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+			cmd |= B43legacy_MACCMD_BEACON0_VALID;
+			b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+		} else if (!beacon1_valid) {
+			b43legacy_upload_beacon1(dev);
+			cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+			cmd |= B43legacy_MACCMD_BEACON1_VALID;
+			b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+		}
+	}
+}
+
+static void b43legacy_beacon_update_trigger_work(struct work_struct *work)
+{
+	struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl,
+					 beacon_update_trigger);
+	struct b43legacy_wldev *dev;
+
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+	if (likely(dev && (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED))) {
+		spin_lock_irq(&wl->irq_lock);
+		/* Update beacon right away or defer to IRQ. */
+		handle_irq_beacon(dev);
+		/* The handler might have updated the IRQ mask. */
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
+				  dev->irq_mask);
+		mmiowb();
+		spin_unlock_irq(&wl->irq_lock);
+	}
+	mutex_unlock(&wl->mutex);
+}
+
 /* Asynchronously update the packet templates in template RAM.
  * Locking: Requires wl->irq_lock to be locked. */
 static void b43legacy_update_templates(struct b43legacy_wl *wl)
@@ -1156,54 +1252,24 @@ static void b43legacy_update_templates(struct b43legacy_wl *wl)
 	wl->current_beacon = beacon;
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
+	queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
 }
 
 static void b43legacy_set_beacon_int(struct b43legacy_wldev *dev,
 				     u16 beacon_int)
 {
 	b43legacy_time_lock(dev);
-	if (dev->dev->id.revision >= 3)
-		b43legacy_write32(dev, 0x188, (beacon_int << 16));
-	else {
+	if (dev->dev->id.revision >= 3) {
+		b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_REP,
+				 (beacon_int << 16));
+		b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_START,
+				 (beacon_int << 10));
+	} else {
 		b43legacy_write16(dev, 0x606, (beacon_int >> 6));
 		b43legacy_write16(dev, 0x610, beacon_int);
 	}
 	b43legacy_time_unlock(dev);
-}
-
-static void handle_irq_beacon(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_wl *wl = dev->wl;
-	u32 cmd;
-
-	if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
-		return;
-
-	/* This is the bottom half of the asynchronous beacon update. */
-
-	cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
-	if (!(cmd & B43legacy_MACCMD_BEACON0_VALID)) {
-		if (!wl->beacon0_uploaded) {
-			b43legacy_write_beacon_template(dev, 0x68,
-							B43legacy_SHM_SH_BTL0,
-							B43legacy_CCK_RATE_1MB);
-			b43legacy_write_probe_resp_template(dev, 0x268,
-							    B43legacy_SHM_SH_PRTLEN,
-							    &__b43legacy_ratetable[3]);
-			wl->beacon0_uploaded = 1;
-		}
-		cmd |= B43legacy_MACCMD_BEACON0_VALID;
-	}
-	if (!(cmd & B43legacy_MACCMD_BEACON1_VALID)) {
-		if (!wl->beacon1_uploaded) {
-			b43legacy_write_beacon_template(dev, 0x468,
-							B43legacy_SHM_SH_BTL1,
-							B43legacy_CCK_RATE_1MB);
-			wl->beacon1_uploaded = 1;
-		}
-		cmd |= B43legacy_MACCMD_BEACON1_VALID;
-	}
-	b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+	b43legacydbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
 }
 
 static void handle_irq_ucode_debug(struct b43legacy_wldev *dev)
@@ -1302,7 +1368,7 @@ static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
 	if (reason & B43legacy_IRQ_TX_OK)
 		handle_irq_transmit_status(dev);
 
-	b43legacy_interrupt_enable(dev, dev->irq_savedstate);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	mmiowb();
 	spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
 }
@@ -1354,18 +1420,18 @@ static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id)
 	struct b43legacy_wldev *dev = dev_id;
 	u32 reason;
 
-	if (!dev)
-		return IRQ_NONE;
+	B43legacy_WARN_ON(!dev);
 
 	spin_lock(&dev->wl->irq_lock);
 
-	if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
+	if (unlikely(b43legacy_status(dev) < B43legacy_STAT_STARTED))
+		/* This can only happen on shared IRQ lines. */
 		goto out;
 	reason = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
 	if (reason == 0xffffffff) /* shared IRQ */
 		goto out;
 	ret = IRQ_HANDLED;
-	reason &= b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
+	reason &= dev->irq_mask;
 	if (!reason)
 		goto out;
 
@@ -1389,10 +1455,9 @@ static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id)
 					      & 0x0000DC00;
 
 	b43legacy_interrupt_ack(dev, reason);
-	/* disable all IRQs. They are enabled again in the bottom half. */
-	dev->irq_savedstate = b43legacy_interrupt_disable(dev,
-							  B43legacy_IRQ_ALL);
-	/* save the reason code and call our bottom half. */
+	/* Disable all IRQs. They are enabled again in the bottom half. */
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
+	/* Save the reason code and call our bottom half. */
 	dev->irq_reason = reason;
 	tasklet_schedule(&dev->isr_tasklet);
 out:
@@ -1852,7 +1917,8 @@ void b43legacy_mac_enable(struct b43legacy_wldev *dev)
 
 		/* Re-enable IRQs. */
 		spin_lock_irq(&dev->wl->irq_lock);
-		b43legacy_interrupt_enable(dev, dev->irq_savedstate);
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
+				  dev->irq_mask);
 		spin_unlock_irq(&dev->wl->irq_lock);
 	}
 }
@@ -1871,10 +1937,9 @@ void b43legacy_mac_suspend(struct b43legacy_wldev *dev)
 		/* Mask IRQs before suspending MAC. Otherwise
 		 * the MAC stays busy and won't suspend. */
 		spin_lock_irq(&dev->wl->irq_lock);
-		tmp = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
 		spin_unlock_irq(&dev->wl->irq_lock);
 		b43legacy_synchronize_irq(dev);
-		dev->irq_savedstate = tmp;
 
 		b43legacy_power_saving_ctl_bits(dev, -1, 1);
 		b43legacy_write32(dev, B43legacy_MMIO_MACCTL,
@@ -2297,6 +2362,7 @@ static void b43legacy_security_init(struct b43legacy_wldev *dev)
 				  dev->max_nr_keys - 8);
 }
 
+#ifdef CONFIG_B43LEGACY_HWRNG
 static int b43legacy_rng_read(struct hwrng *rng, u32 *data)
 {
 	struct b43legacy_wl *wl = (struct b43legacy_wl *)rng->priv;
@@ -2312,17 +2378,21 @@ static int b43legacy_rng_read(struct hwrng *rng, u32 *data)
 
 	return (sizeof(u16));
 }
+#endif
 
 static void b43legacy_rng_exit(struct b43legacy_wl *wl)
 {
+#ifdef CONFIG_B43LEGACY_HWRNG
 	if (wl->rng_initialized)
 		hwrng_unregister(&wl->rng);
+#endif
 }
 
 static int b43legacy_rng_init(struct b43legacy_wl *wl)
 {
-	int err;
+	int err = 0;
 
+#ifdef CONFIG_B43LEGACY_HWRNG
 	snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
 		 "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
 	wl->rng.name = wl->rng_name;
@@ -2336,6 +2406,7 @@ static int b43legacy_rng_init(struct b43legacy_wl *wl)
 		       "number generator (%d)\n", err);
 	}
 
+#endif
 	return err;
 }
 
@@ -2557,7 +2628,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	int antenna_tx;
 	int antenna_rx;
 	int err = 0;
-	u32 savedirqs;
 
 	antenna_tx = B43legacy_ANTENNA_DEFAULT;
 	antenna_rx = B43legacy_ANTENNA_DEFAULT;
@@ -2597,7 +2667,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 		spin_unlock_irqrestore(&wl->irq_lock, flags);
 		goto out_unlock_mutex;
 	}
-	savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 	b43legacy_synchronize_irq(dev);
 
@@ -2619,11 +2689,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	/* Antennas for RX and management frame TX. */
 	b43legacy_mgmtframe_txantenna(dev, antenna_tx);
 
-	/* Update templates for AP mode. */
-	if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
-		b43legacy_set_beacon_int(dev, conf->beacon_int);
-
-
 	if (!!conf->radio_enabled != phy->radio_on) {
 		if (conf->radio_enabled) {
 			b43legacy_radio_turn_on(dev);
@@ -2641,7 +2706,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	}
 
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43legacy_interrupt_enable(dev, savedirqs);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	mmiowb();
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 out_unlock_mutex:
@@ -2704,9 +2769,9 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
 	struct b43legacy_wldev *dev;
 	struct b43legacy_phy *phy;
 	unsigned long flags;
-	u32 savedirqs;
 
 	mutex_lock(&wl->mutex);
+	B43legacy_WARN_ON(wl->vif != vif);
 
 	dev = wl->current_dev;
 	phy = &dev->phy;
@@ -2719,12 +2784,35 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
 		spin_unlock_irqrestore(&wl->irq_lock, flags);
 		goto out_unlock_mutex;
 	}
-	savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
+
+	if (changed & BSS_CHANGED_BSSID) {
+		b43legacy_synchronize_irq(dev);
+
+		if (conf->bssid)
+			memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+		else
+			memset(wl->bssid, 0, ETH_ALEN);
+	}
+
+	if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
+		if (changed & BSS_CHANGED_BEACON &&
+		    (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
+		     b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+			b43legacy_update_templates(wl);
+
+		if (changed & BSS_CHANGED_BSSID)
+			b43legacy_write_mac_bssid_templates(dev);
+	}
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43legacy_synchronize_irq(dev);
 
 	b43legacy_mac_suspend(dev);
 
+	if (changed & BSS_CHANGED_BEACON_INT &&
+	    (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
+	     b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+		b43legacy_set_beacon_int(dev, conf->beacon_int);
+
 	if (changed & BSS_CHANGED_BASIC_RATES)
 		b43legacy_update_basic_rates(dev, conf->basic_rates);
 
@@ -2738,14 +2826,12 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
 	b43legacy_mac_enable(dev);
 
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43legacy_interrupt_enable(dev, savedirqs);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	/* XXX: why? */
 	mmiowb();
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
  out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
-
-	return;
 }
 
 static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
@@ -2787,40 +2873,6 @@ static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 }
 
-static int b43legacy_op_config_interface(struct ieee80211_hw *hw,
-					 struct ieee80211_vif *vif,
-					 struct ieee80211_if_conf *conf)
-{
-	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
-	struct b43legacy_wldev *dev = wl->current_dev;
-	unsigned long flags;
-
-	if (!dev)
-		return -ENODEV;
-	mutex_lock(&wl->mutex);
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	B43legacy_WARN_ON(wl->vif != vif);
-	if (conf->bssid)
-		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
-	else
-		memset(wl->bssid, 0, ETH_ALEN);
-	if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
-		if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) {
-			B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP);
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43legacy_update_templates(wl);
-		} else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43legacy_update_templates(wl);
-		}
-		b43legacy_write_mac_bssid_templates(dev);
-	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	mutex_unlock(&wl->mutex);
-
-	return 0;
-}
-
 /* Locking: wl->mutex */
 static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
 {
@@ -2834,8 +2886,7 @@ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
 	 * setting the status to INITIALIZED, as the interrupt handler
 	 * won't care about IRQs then. */
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	dev->irq_savedstate = b43legacy_interrupt_disable(dev,
-							  B43legacy_IRQ_ALL);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
 	b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 	b43legacy_synchronize_irq(dev);
@@ -2875,7 +2926,7 @@ static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev)
 
 	/* Start data flow (TX/RX) */
 	b43legacy_mac_enable(dev);
-	b43legacy_interrupt_enable(dev, dev->irq_savedstate);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 
 	/* Start maintenance work */
 	b43legacy_periodic_tasks_setup(dev);
@@ -3038,7 +3089,7 @@ static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev)
 	/* IRQ related flags */
 	dev->irq_reason = 0;
 	memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
-	dev->irq_savedstate = B43legacy_IRQ_MASKTEMPLATE;
+	dev->irq_mask = B43legacy_IRQ_MASKTEMPLATE;
 
 	dev->mac_suspended = 1;
 
@@ -3380,11 +3431,6 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	struct b43legacy_wldev *dev = wl->current_dev;
 	int did_init = 0;
 	int err = 0;
-	bool do_rfkill_exit = 0;
-
-	/* First register RFkill.
-	 * LEDs that are registered later depend on it. */
-	b43legacy_rfkill_init(dev);
 
 	/* Kill all old instance specific information to make sure
 	 * the card won't use it in the short timeframe between start
@@ -3392,15 +3438,16 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	memset(wl->bssid, 0, ETH_ALEN);
 	memset(wl->mac_addr, 0, ETH_ALEN);
 	wl->filter_flags = 0;
+	wl->beacon0_uploaded = 0;
+	wl->beacon1_uploaded = 0;
+	wl->beacon_templates_virgin = 1;
 
 	mutex_lock(&wl->mutex);
 
 	if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
 		err = b43legacy_wireless_core_init(dev);
-		if (err) {
-			do_rfkill_exit = 1;
+		if (err)
 			goto out_mutex_unlock;
-		}
 		did_init = 1;
 	}
 
@@ -3409,17 +3456,15 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 		if (err) {
 			if (did_init)
 				b43legacy_wireless_core_exit(dev);
-			do_rfkill_exit = 1;
 			goto out_mutex_unlock;
 		}
 	}
 
+	wiphy_rfkill_start_polling(hw->wiphy);
+
 out_mutex_unlock:
 	mutex_unlock(&wl->mutex);
 
-	if (do_rfkill_exit)
-		b43legacy_rfkill_exit(dev);
-
 	return err;
 }
 
@@ -3428,7 +3473,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
 	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
 	struct b43legacy_wldev *dev = wl->current_dev;
 
-	b43legacy_rfkill_exit(dev);
+	cancel_work_sync(&(wl->beacon_update_trigger));
 
 	mutex_lock(&wl->mutex);
 	if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
@@ -3457,13 +3502,13 @@ static const struct ieee80211_ops b43legacy_hw_ops = {
 	.remove_interface	= b43legacy_op_remove_interface,
 	.config			= b43legacy_op_dev_config,
 	.bss_info_changed	= b43legacy_op_bss_info_changed,
-	.config_interface	= b43legacy_op_config_interface,
 	.configure_filter	= b43legacy_op_configure_filter,
 	.get_stats		= b43legacy_op_get_stats,
 	.get_tx_stats		= b43legacy_op_get_tx_stats,
 	.start			= b43legacy_op_start,
 	.stop			= b43legacy_op_stop,
 	.set_tim		= b43legacy_op_beacon_set_tim,
+	.rfkill_poll		= b43legacy_rfkill_poll,
 };
 
 /* Hard-reset the chip. Do not call this directly.
@@ -3760,6 +3805,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	spin_lock_init(&wl->leds_lock);
 	mutex_init(&wl->mutex);
 	INIT_LIST_HEAD(&wl->devlist);
+	INIT_WORK(&wl->beacon_update_trigger, b43legacy_beacon_update_trigger_work);
 
 	ssb_set_devtypedata(dev, wl);
 	b43legacyinfo(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c
index 746d5361bba..51866c9a276 100644
--- a/drivers/net/wireless/b43legacy/pio.c
+++ b/drivers/net/wireless/b43legacy/pio.c
@@ -443,7 +443,7 @@ int b43legacy_pio_init(struct b43legacy_wldev *dev)
 	pio->queue3 = queue;
 
 	if (dev->dev->id.revision < 3)
-		dev->irq_savedstate |= B43legacy_IRQ_PIO_WORKAROUND;
+		dev->irq_mask |= B43legacy_IRQ_PIO_WORKAROUND;
 
 	b43legacydbg(dev->wl, "PIO initialized\n");
 	err = 0;
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index b32bf6a94f1..8783022db11 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -22,15 +22,12 @@
 
 */
 
-#include "rfkill.h"
 #include "radio.h"
 #include "b43legacy.h"
 
-#include <linux/kmod.h>
-
 
 /* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
+bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 {
 	if (dev->phy.rev >= 3) {
 		if (!(b43legacy_read32(dev, B43legacy_MMIO_RADIO_HWENABLED_HI)
@@ -45,165 +42,43 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 }
 
 /* The poll callback for the hardware button. */
-static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
+void b43legacy_rfkill_poll(struct ieee80211_hw *hw)
 {
-	struct b43legacy_wldev *dev = poll_dev->private;
-	struct b43legacy_wl *wl = dev->wl;
+	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
+	struct b43legacy_wldev *dev = wl->current_dev;
+	struct ssb_bus *bus = dev->dev->bus;
 	bool enabled;
-	bool report_change = 0;
+	bool brought_up = false;
 
 	mutex_lock(&wl->mutex);
 	if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) {
-		mutex_unlock(&wl->mutex);
-		return;
+		if (ssb_bus_powerup(bus, 0)) {
+			mutex_unlock(&wl->mutex);
+			return;
+		}
+		ssb_device_enable(dev->dev, 0);
+		brought_up = true;
 	}
+
 	enabled = b43legacy_is_hw_radio_enabled(dev);
+
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
-		report_change = 1;
 		b43legacyinfo(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
-	}
-	mutex_unlock(&wl->mutex);
-
-	/* send the radio switch event to the system - note both a key press
-	 * and a release are required */
-	if (unlikely(report_change)) {
-		input_report_key(poll_dev->input, KEY_WLAN, 1);
-		input_report_key(poll_dev->input, KEY_WLAN, 0);
-	}
-}
-
-/* Called when the RFKILL toggled in software.
- * This is called without locking. */
-static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state)
-{
-	struct b43legacy_wldev *dev = data;
-	struct b43legacy_wl *wl = dev->wl;
-	int err = -EBUSY;
-
-	if (!wl->rfkill.registered)
-		return 0;
-
-	mutex_lock(&wl->mutex);
-	if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
-		goto out_unlock;
-	err = 0;
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (!dev->radio_hw_enable) {
-			/* No luck. We can't toggle the hardware RF-kill
-			 * button from software. */
-			err = -EBUSY;
-			goto out_unlock;
+		wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+		if (enabled != dev->phy.radio_on) {
+			if (enabled)
+				b43legacy_radio_turn_on(dev);
+			else
+				b43legacy_radio_turn_off(dev, 0);
 		}
-		if (!dev->phy.radio_on)
-			b43legacy_radio_turn_on(dev);
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		if (dev->phy.radio_on)
-			b43legacy_radio_turn_off(dev, 0);
-		break;
-	default:
-		b43legacywarn(wl, "Received unexpected rfkill state %d.\n",
-			      state);
-		break;
 	}
 
-out_unlock:
-	mutex_unlock(&wl->mutex);
-
-	return err;
-}
-
-char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return NULL;
-	return rfkill_get_led_name(rfk->rfkill);
-}
-
-void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_wl *wl = dev->wl;
-	struct b43legacy_rfkill *rfk = &(wl->rfkill);
-	int err;
-
-	rfk->registered = 0;
-
-	rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
-	if (!rfk->rfkill)
-		goto out_error;
-	snprintf(rfk->name, sizeof(rfk->name),
-		 "b43legacy-%s", wiphy_name(wl->hw->wiphy));
-	rfk->rfkill->name = rfk->name;
-	rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-	rfk->rfkill->data = dev;
-	rfk->rfkill->toggle_radio = b43legacy_rfkill_soft_toggle;
-	rfk->rfkill->user_claim_unsupported = 1;
-
-	rfk->poll_dev = input_allocate_polled_device();
-	if (!rfk->poll_dev) {
-		rfkill_free(rfk->rfkill);
-		goto err_freed_rfk;
+	if (brought_up) {
+		ssb_device_disable(dev->dev, 0);
+		ssb_bus_may_powerdown(bus);
 	}
 
-	rfk->poll_dev->private = dev;
-	rfk->poll_dev->poll = b43legacy_rfkill_poll;
-	rfk->poll_dev->poll_interval = 1000; /* msecs */
-
-	rfk->poll_dev->input->name = rfk->name;
-	rfk->poll_dev->input->id.bustype = BUS_HOST;
-	rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
-	rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
-
-	err = rfkill_register(rfk->rfkill);
-	if (err)
-		goto err_free_polldev;
-
-#ifdef CONFIG_RFKILL_INPUT_MODULE
-	/* B43legacy RF-kill isn't useful without the rfkill-input subsystem.
-	 * Try to load the module. */
-	err = request_module("rfkill-input");
-	if (err)
-		b43legacywarn(wl, "Failed to load the rfkill-input module."
-			"The built-in radio LED will not work.\n");
-#endif /* CONFIG_RFKILL_INPUT */
-
-	err = input_register_polled_device(rfk->poll_dev);
-	if (err)
-		goto err_unreg_rfk;
-
-	rfk->registered = 1;
-
-	return;
-err_unreg_rfk:
-	rfkill_unregister(rfk->rfkill);
-err_free_polldev:
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-err_freed_rfk:
-	rfk->rfkill = NULL;
-out_error:
-	rfk->registered = 0;
-	b43legacywarn(wl, "RF-kill button init failed\n");
-}
-
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return;
-	rfk->registered = 0;
-
-	input_unregister_polled_device(rfk->poll_dev);
-	rfkill_unregister(rfk->rfkill);
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-	rfk->rfkill = NULL;
+	mutex_unlock(&wl->mutex);
 }
-
diff --git a/drivers/net/wireless/b43legacy/rfkill.h b/drivers/net/wireless/b43legacy/rfkill.h
index 11150a8032f..75585571c54 100644
--- a/drivers/net/wireless/b43legacy/rfkill.h
+++ b/drivers/net/wireless/b43legacy/rfkill.h
@@ -1,59 +1,11 @@
 #ifndef B43legacy_RFKILL_H_
 #define B43legacy_RFKILL_H_
 
+struct ieee80211_hw;
 struct b43legacy_wldev;
 
-#ifdef CONFIG_B43LEGACY_RFKILL
+void b43legacy_rfkill_poll(struct ieee80211_hw *hw);
 
-#include <linux/rfkill.h>
-#include <linux/workqueue.h>
-#include <linux/input-polldev.h>
-
-
-
-struct b43legacy_rfkill {
-	/* The RFKILL subsystem data structure */
-	struct rfkill *rfkill;
-	/* The poll device for the RFKILL input button */
-	struct input_polled_dev *poll_dev;
-	/* Did initialization succeed? Used for freeing. */
-	bool registered;
-	/* The unique name of this rfkill switch */
-	char name[sizeof("b43legacy-phy4294967295")];
-};
-
-/* The init function returns void, because we are not interested
- * in failing the b43 init process when rfkill init failed. */
-void b43legacy_rfkill_init(struct b43legacy_wldev *dev);
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev);
-
-char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev);
-
-
-#else /* CONFIG_B43LEGACY_RFKILL */
-/* No RFKILL support. */
-
-struct b43legacy_rfkill {
-	/* empty */
-};
-
-static inline void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_free(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
-}
-static inline char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_B43LEGACY_RFKILL */
+bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev);
 
 #endif /* B43legacy_RFKILL_H_ */
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 12fca99f757..b8e39dd06e9 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -274,7 +274,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
 
 	/* PHY TX Control word */
 	if (rate_ofdm)
-		phy_ctl |= B43legacy_TX4_PHY_OFDM;
+		phy_ctl |= B43legacy_TX4_PHY_ENC_OFDM;
 	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 		phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL;
 	switch (info->antenna_sel_tx) {
diff --git a/drivers/net/wireless/b43legacy/xmit.h b/drivers/net/wireless/b43legacy/xmit.h
index 62e09d02788..91633087a20 100644
--- a/drivers/net/wireless/b43legacy/xmit.h
+++ b/drivers/net/wireless/b43legacy/xmit.h
@@ -67,7 +67,9 @@ struct b43legacy_txhdr_fw3 {
 #define B43legacy_TX4_EFT_RTSFBOFDM	0x0010 /* RTS/CTS fallback rate type */
 
 /* PHY TX control word */
-#define B43legacy_TX4_PHY_OFDM		0x0001 /* Data frame rate type */
+#define B43legacy_TX4_PHY_ENC		0x0003 /* Data frame encoding */
+#define B43legacy_TX4_PHY_ENC_CCK	0x0000 /* CCK */
+#define B43legacy_TX4_PHY_ENC_OFDM	0x0001 /* Data frame rate type */
 #define B43legacy_TX4_PHY_SHORTPRMBL	0x0010 /* Use short preamble */
 #define B43legacy_TX4_PHY_ANT		0x03C0 /* Antenna selection */
 #define  B43legacy_TX4_PHY_ANT0		0x0000 /* Use antenna 0 */
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207bce2..c15db229351 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
 	PLX/PCI/CS version of the driver to actually use the driver.
 
 	The driver can be compiled as a module and it will be called
-	"hostap.ko".
+	hostap.
 
 config HOSTAP_FIRMWARE
 	bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_plx.ko".
+	hostap_plx.
 
 config HOSTAP_PCI
 	tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_pci.ko".
+	hostap_pci.
 
 config HOSTAP_CS
 	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_cs.ko".
+	hostap_cs.
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index 6693423f63f..d313b005114 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -377,7 +377,7 @@ int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct hostap_interface *iface;
 	local_info_t *local;
-	int ret = 1;
+	int ret = NETDEV_TX_BUSY;
 	u16 fc;
 	struct hostap_tx_data tx;
 	ap_tx_ret tx_ret;
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 3dad1cf8f24..ff9b5c88218 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -1423,7 +1423,7 @@ static int prism2_hw_init2(struct net_device *dev, int initial)
 		prism2_check_sta_fw_version(local);
 
 		if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR,
-				    &dev->dev_addr, 6, 1) < 0) {
+				    dev->dev_addr, 6, 1) < 0) {
 			printk("%s: could not get own MAC address\n",
 			       dev->name);
 		}
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index cbf15d70320..0e5d51086a4 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -435,7 +435,7 @@ static int prism2_plx_probe(struct pci_dev *pdev,
 	unsigned long pccard_attr_mem;
 	unsigned int pccard_attr_len;
 	void __iomem *attr_mem = NULL;
-	unsigned int cor_offset, cor_index;
+	unsigned int cor_offset = 0, cor_index = 0;
 	u32 reg;
 	local_info_t *local = NULL;
 	struct net_device *dev = NULL;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 97e5647ff05..742432388ca 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -3488,7 +3488,7 @@ static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
 			char *buf)
 {
-	struct ipw2100_priv *p = d->driver_data;
+	struct ipw2100_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->config);
 }
 
@@ -3497,7 +3497,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
 static ssize_t show_status(struct device *d, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ipw2100_priv *p = d->driver_data;
+	struct ipw2100_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->status);
 }
 
@@ -3506,7 +3506,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
 			       char *buf)
 {
-	struct ipw2100_priv *p = d->driver_data;
+	struct ipw2100_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->capability);
 }
 
@@ -4224,7 +4224,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
 	   1 - SW based RF kill active (sysfs)
 	   2 - HW based RF kill active
 	   3 - Both HW and SW baed RF kill active */
-	struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
+	struct ipw2100_priv *priv = dev_get_drvdata(d);
 	int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
 	    (rf_kill_active(priv) ? 0x2 : 0x0);
 	return sprintf(buf, "%i\n", val);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index bd4dbcfe1bb..44c29b3f672 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -1527,7 +1527,7 @@ static DEVICE_ATTR(led, S_IWUSR | S_IRUGO, show_led, store_led);
 static ssize_t show_status(struct device *d,
 			   struct device_attribute *attr, char *buf)
 {
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->status);
 }
 
@@ -1536,7 +1536,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
 			char *buf)
 {
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->config);
 }
 
@@ -1545,7 +1545,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
 static ssize_t show_nic_type(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	return sprintf(buf, "TYPE: %d\n", priv->nic_type);
 }
 
@@ -1555,7 +1555,7 @@ static ssize_t show_ucode_version(struct device *d,
 				  struct device_attribute *attr, char *buf)
 {
 	u32 len = sizeof(u32), tmp = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	if (ipw_get_ordinal(p, IPW_ORD_STAT_UCODE_VERSION, &tmp, &len))
 		return 0;
@@ -1569,7 +1569,7 @@ static ssize_t show_rtc(struct device *d, struct device_attribute *attr,
 			char *buf)
 {
 	u32 len = sizeof(u32), tmp = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	if (ipw_get_ordinal(p, IPW_ORD_STAT_RTC, &tmp, &len))
 		return 0;
@@ -1586,14 +1586,15 @@ static DEVICE_ATTR(rtc, S_IWUSR | S_IRUGO, show_rtc, NULL);
 static ssize_t show_eeprom_delay(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
-	int n = ((struct ipw_priv *)d->driver_data)->eeprom_delay;
+	struct ipw_priv *p = dev_get_drvdata(d);
+	int n = p->eeprom_delay;
 	return sprintf(buf, "%i\n", n);
 }
 static ssize_t store_eeprom_delay(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 	sscanf(buf, "%i", &p->eeprom_delay);
 	return strnlen(buf, count);
 }
@@ -1605,7 +1606,7 @@ static ssize_t show_command_event_reg(struct device *d,
 				      struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	reg = ipw_read_reg32(p, IPW_INTERNAL_CMD_EVENT);
 	return sprintf(buf, "0x%08x\n", reg);
@@ -1615,7 +1616,7 @@ static ssize_t store_command_event_reg(struct device *d,
 				       const char *buf, size_t count)
 {
 	u32 reg;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &reg);
 	ipw_write_reg32(p, IPW_INTERNAL_CMD_EVENT, reg);
@@ -1629,7 +1630,7 @@ static ssize_t show_mem_gpio_reg(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	reg = ipw_read_reg32(p, 0x301100);
 	return sprintf(buf, "0x%08x\n", reg);
@@ -1639,7 +1640,7 @@ static ssize_t store_mem_gpio_reg(struct device *d,
 				  const char *buf, size_t count)
 {
 	u32 reg;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &reg);
 	ipw_write_reg32(p, 0x301100, reg);
@@ -1653,7 +1654,7 @@ static ssize_t show_indirect_dword(struct device *d,
 				   struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	if (priv->status & STATUS_INDIRECT_DWORD)
 		reg = ipw_read_reg32(priv, priv->indirect_dword);
@@ -1666,7 +1667,7 @@ static ssize_t store_indirect_dword(struct device *d,
 				    struct device_attribute *attr,
 				    const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &priv->indirect_dword);
 	priv->status |= STATUS_INDIRECT_DWORD;
@@ -1680,7 +1681,7 @@ static ssize_t show_indirect_byte(struct device *d,
 				  struct device_attribute *attr, char *buf)
 {
 	u8 reg = 0;
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	if (priv->status & STATUS_INDIRECT_BYTE)
 		reg = ipw_read_reg8(priv, priv->indirect_byte);
@@ -1693,7 +1694,7 @@ static ssize_t store_indirect_byte(struct device *d,
 				   struct device_attribute *attr,
 				   const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &priv->indirect_byte);
 	priv->status |= STATUS_INDIRECT_BYTE;
@@ -1707,7 +1708,7 @@ static ssize_t show_direct_dword(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	if (priv->status & STATUS_DIRECT_DWORD)
 		reg = ipw_read32(priv, priv->direct_dword);
@@ -1720,7 +1721,7 @@ static ssize_t store_direct_dword(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &priv->direct_dword);
 	priv->status |= STATUS_DIRECT_DWORD;
@@ -1747,7 +1748,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
 	   1 - SW based RF kill active (sysfs)
 	   2 - HW based RF kill active
 	   3 - Both HW and SW baed RF kill active */
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
 	    (rf_kill_active(priv) ? 0x2 : 0x0);
 	return sprintf(buf, "%i\n", val);
@@ -1791,7 +1792,7 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio)
 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	ipw_radio_kill_sw(priv, buf[0] == '1');
 
@@ -1803,7 +1804,7 @@ static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
 static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr,
 			       char *buf)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	int pos = 0, len = 0;
 	if (priv->config & CFG_SPEED_SCAN) {
 		while (priv->speed_scan[pos] != 0)
@@ -1818,7 +1819,7 @@ static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr,
 static ssize_t store_speed_scan(struct device *d, struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	int channel, pos = 0;
 	const char *p = buf;
 
@@ -1857,14 +1858,14 @@ static DEVICE_ATTR(speed_scan, S_IWUSR | S_IRUGO, show_speed_scan,
 static ssize_t show_net_stats(struct device *d, struct device_attribute *attr,
 			      char *buf)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	return sprintf(buf, "%c\n", (priv->config & CFG_NET_STATS) ? '1' : '0');
 }
 
 static ssize_t store_net_stats(struct device *d, struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	if (buf[0] == '1')
 		priv->config |= CFG_NET_STATS;
 	else
@@ -3176,11 +3177,8 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 	/* Start the Dma */
 	rc = ipw_fw_dma_enable(priv);
 
-	if (priv->sram_desc.last_cb_index > 0) {
-		/* the DMA is already ready this would be a bug. */
-		BUG();
-		goto out;
-	}
+	/* the DMA is already ready this would be a bug. */
+	BUG_ON(priv->sram_desc.last_cb_index > 0);
 
 	do {
 		chunk = (struct fw_chunk *)(data + offset);
@@ -11526,7 +11524,8 @@ static int ipw_prom_stop(struct net_device *dev)
 static int ipw_prom_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	IPW_DEBUG_INFO("prom dev->xmit\n");
-	return -EOPNOTSUPP;
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 static const struct net_device_ops ipw_prom_netdev_ops = {
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 92a26922e79..8ce6e961c5d 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -154,10 +154,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 		goto failed;
 	}
 	ieee = netdev_priv(dev);
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->hard_start_xmit = ieee80211_xmit;
-	dev->change_mtu = ieee80211_change_mtu;
-#endif
 
 	ieee->dev = dev;
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_tx.c b/drivers/net/wireless/ipw2x00/libipw_tx.c
index 65a8195b3d9..da2ad5437ce 100644
--- a/drivers/net/wireless/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_tx.c
@@ -539,7 +539,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&ieee->lock, flags);
 	netif_stop_queue(dev);
 	dev->stats.tx_errors++;
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 EXPORT_SYMBOL(ieee80211_xmit);
 
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f6406a1..e092af09d6b 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -5,16 +5,11 @@ config IWLWIFI
 	select FW_LOADER
 	select MAC80211_LEDS if IWLWIFI_LEDS
 	select LEDS_CLASS if IWLWIFI_LEDS
-	select RFKILL if IWLWIFI_RFKILL
 
 config IWLWIFI_LEDS
 	bool "Enable LED support in iwlagn and iwl3945 drivers"
 	depends on IWLWIFI
 
-config IWLWIFI_RFKILL
-	bool "Enable RF kill support in iwlagn and iwl3945 drivers"
-	depends on IWLWIFI
-
 config IWLWIFI_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwlagn driver"
 	depends on IWLWIFI
@@ -75,7 +70,7 @@ config IWLAGN
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwlagn.ko.
+	  module will be called iwlagn.
 
 
 config IWL4965
@@ -113,7 +108,7 @@ config IWL3945
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl3945.ko.
+	  module will be called iwl3945.
 
 config IWL3945_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index d79d97ad61a..1d4e0a226fd 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -4,7 +4,6 @@ iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
 iwlcore-objs 		+= iwl-scan.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
-iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
 iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
 
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index ac22f59be9e..225e5f88934 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -44,6 +44,15 @@
 #include "iwl-core.h"
 #include "iwl-dev.h"
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+static const char *led_type_str[] = {
+	__stringify(IWL_LED_TRG_TX),
+	__stringify(IWL_LED_TRG_RX),
+	__stringify(IWL_LED_TRG_ASSOC),
+	__stringify(IWL_LED_TRG_RADIO),
+	NULL
+};
+#endif /* CONFIG_IWLWIFI_DEBUG */
 
 static const struct {
 	u16 brightness;
@@ -61,7 +70,7 @@ static const struct {
 	{10, 110, 110},
 	{5, 130, 130},
 	{0, 167, 167},
-	/*SOLID_ON*/
+	/* SOLID_ON */
 	{-1, IWL_LED_SOLID, 0}
 };
 
@@ -143,6 +152,26 @@ static int iwl3945_led_off(struct iwl_priv *priv, int led_id)
 }
 
 /*
+ *  Set led on in case of association
+ *  */
+static int iwl3945_led_associate(struct iwl_priv *priv, int led_id)
+{
+	IWL_DEBUG_LED(priv, "Associated\n");
+
+	priv->allow_blinking = 1;
+	return iwl3945_led_on(priv, led_id);
+}
+/* Set Led off in case of disassociation */
+static int iwl3945_led_disassociate(struct iwl_priv *priv, int led_id)
+{
+	IWL_DEBUG_LED(priv, "Disassociated\n");
+
+	priv->allow_blinking = 0;
+
+	return 0;
+}
+
+/*
  * brightness call back function for Tx/Rx LED
  */
 static int iwl3945_led_associated(struct iwl_priv *priv, int led_id)
@@ -165,26 +194,21 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
 				enum led_brightness brightness)
 {
 	struct iwl_led *led = container_of(led_cdev,
-					       struct iwl_led, led_dev);
+					   struct iwl_led, led_dev);
 	struct iwl_priv *priv = led->priv;
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
+	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
+			led_type_str[led->type], brightness);
+
 	switch (brightness) {
 	case LED_FULL:
-		if (led->type == IWL_LED_TRG_ASSOC) {
-			priv->allow_blinking = 1;
-			IWL_DEBUG_LED(priv, "MAC is  associated\n");
-		}
 		if (led->led_on)
 			led->led_on(priv, IWL_LED_LINK);
 		break;
 	case LED_OFF:
-		if (led->type == IWL_LED_TRG_ASSOC) {
-			priv->allow_blinking = 0;
-			IWL_DEBUG_LED(priv, "MAC is disassociated\n");
-		}
 		if (led->led_off)
 			led->led_off(priv, IWL_LED_LINK);
 		break;
@@ -197,8 +221,6 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
 	}
 }
 
-
-
 /*
  * Register led class with the system
  */
@@ -237,12 +259,12 @@ static int iwl3945_led_register_led(struct iwl_priv *priv,
 static inline u8 get_blink_rate(struct iwl_priv *priv)
 {
 	int index;
-	u64 current_tpt = priv->rxtxpackets;
-	s64 tpt = current_tpt - priv->led_tpt;
+	s64 tpt = priv->rxtxpackets;
 
 	if (tpt < 0)
 		tpt = -tpt;
-	priv->led_tpt = current_tpt;
+
+	IWL_DEBUG_LED(priv, "tpt %lld \n", (long long)tpt);
 
 	if (!priv->allow_blinking)
 		index = IWL_MAX_BLINK_TBL;
@@ -250,13 +272,9 @@ static inline u8 get_blink_rate(struct iwl_priv *priv)
 		for (index = 0; index < IWL_MAX_BLINK_TBL; index++)
 			if (tpt > (blink_tbl[index].brightness * IWL_1MB_RATE))
 				break;
-	return index;
-}
 
-static inline int is_rf_kill(struct iwl_priv *priv)
-{
-	return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-		test_bit(STATUS_RF_KILL_SW, &priv->status);
+	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", index);
+	return index;
 }
 
 /*
@@ -272,7 +290,7 @@ void iwl3945_led_background(struct iwl_priv *priv)
 		priv->last_blink_time = 0;
 		return;
 	}
-	if (is_rf_kill(priv)) {
+	if (iwl_is_rfkill(priv)) {
 		priv->last_blink_time = 0;
 		return;
 	}
@@ -341,8 +359,8 @@ int iwl3945_led_register(struct iwl_priv *priv)
 				   IWL_LED_TRG_ASSOC, 0, trigger);
 
 	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on;
+	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_associate;
+	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_disassociate;
 	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
 
 	if (ret)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index af6b9d44477..5eb538d18a8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -38,6 +38,7 @@
 
 #include "iwl-commands.h"
 #include "iwl-3945.h"
+#include "iwl-sta.h"
 
 #define RS_NAME "iwl-3945-rs"
 
@@ -683,11 +684,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 	if (sta)
 		rate_mask = sta->supp_rates[sband->band];
 
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	fc = le16_to_cpu(hdr->frame_control);
 	if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
-	    is_multicast_ether_addr(hdr->addr1) ||
+	    info->flags & IEEE80211_TX_CTL_NO_ACK ||
 	    !sta || !priv_sta) {
 		IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
 		if (!rate_mask)
@@ -696,6 +696,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 		else
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, sta);
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			info->control.rates[0].count = 1;
 		return;
 	}
 
@@ -713,13 +715,13 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 
 	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
 	    !rs_sta->ibss_sta_added) {
-		u8 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
+		u8 sta_id = iwl_find_station(priv, hdr->addr1);
 
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
 				       hdr->addr1);
-			sta_id = iwl3945_add_station(priv,
-				    hdr->addr1, 0, CMD_ASYNC);
+			sta_id = iwl_add_station(priv, hdr->addr1, false,
+				CMD_ASYNC, NULL);
 		}
 		if (sta_id != IWL_INVALID_STATION)
 			rs_sta->ibss_sta_added = 1;
@@ -974,7 +976,7 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(hw, priv->stations_39[sta_id].sta.sta.addr);
+	sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr);
 	if (!sta) {
 		rcu_read_unlock();
 		return;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 527525cc091..46288e72488 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -98,7 +98,6 @@ const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
  *   ... and set IWL_EVT_DISABLE to 1. */
 void iwl3945_disable_events(struct iwl_priv *priv)
 {
-	int ret;
 	int i;
 	u32 base;		/* SRAM address of event log header */
 	u32 disable_ptr;	/* SRAM address of event-disable bitmap array */
@@ -159,26 +158,17 @@ void iwl3945_disable_events(struct iwl_priv *priv)
 		return;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
 	array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
-	iwl_release_nic_access(priv);
 
 	if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
 		IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
 			       disable_ptr);
-		ret = iwl_grab_nic_access(priv);
 		for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
 			iwl_write_targ_mem(priv,
 					   disable_ptr + (i * sizeof(u32)),
 					   evt_disable[i]);
 
-		iwl_release_nic_access(priv);
 	} else {
 		IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
 		IWL_DEBUG_INFO(priv, "  by writing \"1\"s into disable bitmap\n");
@@ -779,35 +769,6 @@ void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 	return ;
 }
 
-u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *addr)
-{
-	int i, start = IWL_AP_ID;
-	int ret = IWL_INVALID_STATION;
-	unsigned long flags;
-
-	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
-	    (priv->iw_mode == NL80211_IFTYPE_AP))
-		start = IWL_STA_ID;
-
-	if (is_broadcast_ether_addr(addr))
-		return priv->hw_params.bcast_sta_id;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	for (i = start; i < priv->hw_params.max_stations; i++)
-		if ((priv->stations_39[i].used) &&
-		    (!compare_ether_addr
-		     (priv->stations_39[i].sta.sta.addr, addr))) {
-			ret = i;
-			goto out;
-		}
-
-	IWL_DEBUG_INFO(priv, "can not find STA %pM (total %d)\n",
-		       addr, priv->num_stations);
- out:
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-	return ret;
-}
-
 /**
  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
  *
@@ -885,13 +846,13 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, struct iwl_cmd *cmd,
 u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 {
 	unsigned long flags_spin;
-	struct iwl3945_station_entry *station;
+	struct iwl_station_entry *station;
 
 	if (sta_id == IWL_INVALID_STATION)
 		return IWL_INVALID_STATION;
 
 	spin_lock_irqsave(&priv->sta_lock, flags_spin);
-	station = &priv->stations_39[sta_id];
+	station = &priv->stations[sta_id];
 
 	station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
 	station->sta.rate_n_flags = cpu_to_le16(tx_rate);
@@ -899,8 +860,7 @@ u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 
-	iwl_send_add_sta(priv,
-			 (struct iwl_addsta_cmd *)&station->sta, flags);
+	iwl_send_add_sta(priv, &station->sta, flags);
 	IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
 			sta_id, tx_rate);
 	return sta_id;
@@ -908,55 +868,30 @@ u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 
 static int iwl3945_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 {
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	if (src == IWL_PWR_SRC_VAUX) {
 		if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
 			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 					APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 					~APMG_PS_CTRL_MSK_PWR_SRC);
-			iwl_release_nic_access(priv);
 
 			iwl_poll_bit(priv, CSR_GPIO_IN,
 				     CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
 				     CSR_GPIO_IN_BIT_AUX_POWER, 5000);
-		} else {
-			iwl_release_nic_access(priv);
 		}
 	} else {
 		iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 				~APMG_PS_CTRL_MSK_PWR_SRC);
 
-		iwl_release_nic_access(priv);
 		iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
 			     CSR_GPIO_IN_BIT_AUX_POWER, 5000);	/* uS */
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return ret;
+	return 0;
 }
 
 static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 {
-	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
-
 	iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->dma_addr);
 	iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
 	iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
@@ -973,23 +908,11 @@ static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	/* fake read to flush all prev I/O */
 	iwl_read_direct32(priv, FH39_RSSR_CTRL);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
 static int iwl3945_tx_reset(struct iwl_priv *priv)
 {
-	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 
 	/* bypass mode */
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
@@ -1017,8 +940,6 @@ static int iwl3945_tx_reset(struct iwl_priv *priv)
 		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
 		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -1061,7 +982,7 @@ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
 
 static int iwl3945_apm_init(struct iwl_priv *priv)
 {
-	int ret = 0;
+	int ret;
 
 	iwl_power_initialize(priv);
 
@@ -1083,10 +1004,6 @@ static int iwl3945_apm_init(struct iwl_priv *priv)
 		goto out;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 						APMG_CLK_VAL_BSM_CLK_RQT);
@@ -1097,7 +1014,6 @@ static int iwl3945_apm_init(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
 out:
 	return ret;
 }
@@ -1110,6 +1026,11 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 
 	spin_lock_irqsave(&priv->lock, flags);
 
+	/* Determine HW type */
+	pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
+
+	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
+
 	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
 		IWL_DEBUG_INFO(priv, "RTP type \n");
 	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
@@ -1163,7 +1084,6 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 
 int iwl3945_hw_nic_init(struct iwl_priv *priv)
 {
-	u8 rev_id;
 	int rc;
 	unsigned long flags;
 	struct iwl_rx_queue *rxq = &priv->rxq;
@@ -1172,12 +1092,6 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv)
 	priv->cfg->ops->lib->apm_ops.init(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* Determine HW type */
-	rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
-	if (rc)
-		return rc;
-	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
-
 	rc = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
 	if (rc)
 		return rc;
@@ -1198,22 +1112,13 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv)
 
 	iwl3945_rx_init(priv, rxq);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
 	/* Look at using this instead:
 	rxq->need_update = 1;
 	iwl_rx_queue_update_write_ptr(priv, rxq);
 	*/
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 	iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
-	iwl_release_nic_access(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	rc = iwl3945_txq_ctx_reset(priv);
 	if (rc)
@@ -1245,14 +1150,6 @@ void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
 {
 	int txq_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (iwl_grab_nic_access(priv)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		iwl3945_hw_txq_ctx_free(priv);
-		return;
-	}
 
 	/* stop SCD */
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
@@ -1265,9 +1162,6 @@ void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
 				1000);
 	}
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	iwl3945_hw_txq_ctx_free(priv);
 }
 
@@ -1312,12 +1206,8 @@ static void iwl3945_apm_stop(struct iwl_priv *priv)
 
 static int iwl3945_apm_reset(struct iwl_priv *priv)
 {
-	int rc;
-	unsigned long flags;
-
 	iwl3945_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 	udelay(10);
@@ -1327,36 +1217,31 @@ static int iwl3945_apm_reset(struct iwl_priv *priv)
 	iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
 			 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 
-	rc = iwl_grab_nic_access(priv);
-	if (!rc) {
-		iwl_write_prph(priv, APMG_CLK_CTRL_REG,
-					 APMG_CLK_VAL_BSM_CLK_RQT);
+	iwl_write_prph(priv, APMG_CLK_CTRL_REG,
+				APMG_CLK_VAL_BSM_CLK_RQT);
 
-		iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
-		iwl_write_prph(priv, APMG_RTC_INT_STT_REG,
+	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
+	iwl_write_prph(priv, APMG_RTC_INT_STT_REG,
 					0xFFFFFFFF);
 
-		/* enable DMA */
-		iwl_write_prph(priv, APMG_CLK_EN_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT |
-					 APMG_CLK_VAL_BSM_CLK_RQT);
-		udelay(10);
+	/* enable DMA */
+	iwl_write_prph(priv, APMG_CLK_EN_REG,
+				APMG_CLK_VAL_DMA_CLK_RQT |
+				APMG_CLK_VAL_BSM_CLK_RQT);
+	udelay(10);
 
-		iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
+	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_VAL_RESET_REQ);
-		udelay(5);
-		iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
+	udelay(5);
+	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_VAL_RESET_REQ);
-		iwl_release_nic_access(priv);
-	}
 
 	/* Clear the 'host command active' bit... */
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 
 	wake_up_interruptible(&priv->wait_command_queue);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return rc;
+	return 0;
 }
 
 /**
@@ -1964,6 +1849,193 @@ int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
 	return 0;
 }
 
+static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
+{
+	int rc = 0;
+	struct iwl_rx_packet *res = NULL;
+	struct iwl3945_rxon_assoc_cmd rxon_assoc;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_RXON_ASSOC,
+		.len = sizeof(rxon_assoc),
+		.meta.flags = CMD_WANT_SKB,
+		.data = &rxon_assoc,
+	};
+	const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
+	const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
+
+	if ((rxon1->flags == rxon2->flags) &&
+	    (rxon1->filter_flags == rxon2->filter_flags) &&
+	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
+	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
+		return 0;
+	}
+
+	rxon_assoc.flags = priv->staging_rxon.flags;
+	rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
+	rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
+	rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
+	rxon_assoc.reserved = 0;
+
+	rc = iwl_send_cmd_sync(priv, &cmd);
+	if (rc)
+		return rc;
+
+	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
+		rc = -EIO;
+	}
+
+	priv->alloc_rxb_skb--;
+	dev_kfree_skb_any(cmd.meta.u.skb);
+
+	return rc;
+}
+
+/**
+ * iwl3945_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data.  This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+static int iwl3945_commit_rxon(struct iwl_priv *priv)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
+	struct iwl3945_rxon_cmd *staging_rxon = (void *)&priv->staging_rxon;
+	int rc = 0;
+	bool new_assoc =
+		!!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
+
+	if (!iwl_is_alive(priv))
+		return -1;
+
+	/* always get timestamp with Rx frame */
+	staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
+
+	/* select antenna */
+	staging_rxon->flags &=
+	    ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
+	staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
+
+	rc = iwl_check_rxon_cmd(priv);
+	if (rc) {
+		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
+		return -EINVAL;
+	}
+
+	/* If we don't need to send a full RXON, we can use
+	 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration. */
+	if (!iwl_full_rxon_required(priv)) {
+		rc = iwl_send_rxon_assoc(priv);
+		if (rc) {
+			IWL_ERR(priv, "Error setting RXON_ASSOC "
+				  "configuration (%d).\n", rc);
+			return rc;
+		}
+
+		memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+
+		return 0;
+	}
+
+	/* If we are currently associated and the new config requires
+	 * an RXON_ASSOC and the new config wants the associated mask enabled,
+	 * we must clear the associated from the active configuration
+	 * before we apply the new config */
+	if (iwl_is_associated(priv) && new_assoc) {
+		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+		/*
+		 * reserved4 and 5 could have been filled by the iwlcore code.
+		 * Let's clear them before pushing to the 3945.
+		 */
+		active_rxon->reserved4 = 0;
+		active_rxon->reserved5 = 0;
+		rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
+				      sizeof(struct iwl3945_rxon_cmd),
+				      &priv->active_rxon);
+
+		/* If the mask clearing failed then we set
+		 * active_rxon back to what it was previously */
+		if (rc) {
+			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+			IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
+				  "configuration (%d).\n", rc);
+			return rc;
+		}
+	}
+
+	IWL_DEBUG_INFO(priv, "Sending RXON\n"
+		       "* with%s RXON_FILTER_ASSOC_MSK\n"
+		       "* channel = %d\n"
+		       "* bssid = %pM\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(staging_rxon->channel),
+		       staging_rxon->bssid_addr);
+
+	/*
+	 * reserved4 and 5 could have been filled by the iwlcore code.
+	 * Let's clear them before pushing to the 3945.
+	 */
+	staging_rxon->reserved4 = 0;
+	staging_rxon->reserved5 = 0;
+
+	iwl_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
+
+	/* Apply the new configuration */
+	rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
+			      sizeof(struct iwl3945_rxon_cmd),
+			      staging_rxon);
+	if (rc) {
+		IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
+		return rc;
+	}
+
+	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+
+	iwl_clear_stations_table(priv);
+
+	/* If we issue a new RXON command which required a tune then we must
+	 * send a new TXPOWER command or we won't be able to Tx any frames */
+	rc = priv->cfg->ops->lib->send_tx_power(priv);
+	if (rc) {
+		IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
+		return rc;
+	}
+
+	/* Add the broadcast address so we can send broadcast frames */
+	if (iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL) ==
+	    IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
+		return -EIO;
+	}
+
+	/* If we have set the ASSOC_MSK and we are in BSS mode then
+	 * add the IWL_AP_ID to the station rate table */
+	if (iwl_is_associated(priv) &&
+	    (priv->iw_mode == NL80211_IFTYPE_STATION))
+		if (iwl_add_station(priv, priv->active_rxon.bssid_addr,
+				true, CMD_SYNC, NULL) == IWL_INVALID_STATION) {
+			IWL_ERR(priv, "Error adding AP address for transmit\n");
+			return -EIO;
+		}
+
+	/* Init the hardware's rate fallback order based on the band */
+	rc = iwl3945_init_hw_rate_table(priv);
+	if (rc) {
+		IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /* will add 3945 channel switch cmd handling later */
 int iwl3945_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 {
@@ -2314,14 +2386,6 @@ int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
 int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
 {
 	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 
 	iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
 	rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
@@ -2329,28 +2393,17 @@ int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
 	if (rc < 0)
 		IWL_ERR(priv, "Can't stop Rx DMA.\n");
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
 int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 {
-	int rc;
-	unsigned long flags;
 	int txq_id = txq->q.id;
 
 	struct iwl3945_shared *shared_data = priv->shared_virt;
 
 	shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 	iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
 	iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
 
@@ -2360,11 +2413,9 @@ int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 		FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
 		FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
 		FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
-	iwl_release_nic_access(priv);
 
 	/* fake read to flush all prev. writes */
 	iwl_read32(priv, FH39_TSSR_CBB_BASE);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -2384,13 +2435,25 @@ static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
 	}
 }
 
+
 static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
-	u16 size = (u16)sizeof(struct iwl3945_addsta_cmd);
-	memcpy(data, cmd, size);
-	return size;
+	struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
+	addsta->mode = cmd->mode;
+	memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
+	memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
+	addsta->station_flags = cmd->station_flags;
+	addsta->station_flags_msk = cmd->station_flags_msk;
+	addsta->tid_disable_tx = cpu_to_le16(0);
+	addsta->rate_n_flags = cmd->rate_n_flags;
+	addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
+	addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
+	addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
+
+	return (u16)sizeof(struct iwl3945_addsta_cmd);
 }
 
+
 /**
  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
  */
@@ -2672,10 +2735,6 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
 	inst_len = priv->ucode_init.len;
 	data_len = priv->ucode_init_data.len;
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc)
-		return rc;
-
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
@@ -2689,10 +2748,8 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
 					  le32_to_cpu(*image));
 
 	rc = iwl3945_verify_bsm(priv);
-	if (rc) {
-		iwl_release_nic_access(priv);
+	if (rc)
 		return rc;
-	}
 
 	/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
 	iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
@@ -2724,11 +2781,14 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
 	iwl_write_prph(priv, BSM_WR_CTRL_REG,
 		BSM_WR_CTRL_REG_BIT_START_EN);
 
-	iwl_release_nic_access(priv);
-
 	return 0;
 }
 
+static struct iwl_hcmd_ops iwl3945_hcmd = {
+	.rxon_assoc = iwl3945_send_rxon_assoc,
+	.commit_rxon = iwl3945_commit_rxon,
+};
+
 static struct iwl_lib_ops iwl3945_lib = {
 	.txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl3945_hw_txq_free_tfd,
@@ -2758,6 +2818,9 @@ static struct iwl_lib_ops iwl3945_lib = {
 	},
 	.send_tx_power	= iwl3945_send_tx_power,
 	.is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
+	.post_associate = iwl3945_post_associate,
+	.isr = iwl_isr_legacy,
+	.config_ap = iwl3945_config_ap,
 };
 
 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
@@ -2767,6 +2830,7 @@ static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
 
 static struct iwl_ops iwl3945_ops = {
 	.lib = &iwl3945_lib,
+	.hcmd = &iwl3945_hcmd,
 	.utils = &iwl3945_hcmd_utils,
 };
 
@@ -2779,7 +2843,8 @@ static struct iwl_cfg iwl3945_bg_cfg = {
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
-	.mod_params = &iwl3945_mod_params
+	.mod_params = &iwl3945_mod_params,
+	.use_isr_legacy = true
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2791,7 +2856,8 @@ static struct iwl_cfg iwl3945_abg_cfg = {
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
-	.mod_params = &iwl3945_mod_params
+	.mod_params = &iwl3945_mod_params,
+	.use_isr_legacy = true
 };
 
 struct pci_device_id iwl3945_hw_card_ids[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 55188844657..fbb3a573463 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -36,10 +36,6 @@
 #include <linux/kernel.h>
 #include <net/ieee80211_radiotap.h>
 
-/*used for rfkill*/
-#include <linux/rfkill.h>
-#include <linux/input.h>
-
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 extern struct pci_device_id iwl3945_hw_card_ids[];
 
@@ -155,14 +151,12 @@ struct iwl3945_frame {
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
-#define STATUS_RF_KILL_SW	4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7
 #define STATUS_TEMPERATURE	8
 #define STATUS_GEO_CONFIGURED	9
 #define STATUS_EXIT_PENDING	10
-#define STATUS_IN_SUSPEND	11
 #define STATUS_STATISTICS	12
 #define STATUS_SCANNING		13
 #define STATUS_SCAN_ABORTING	14
@@ -203,11 +197,6 @@ struct iwl3945_ibss_seq {
  * for use by iwl-*.c
  *
  *****************************************************************************/
-struct iwl3945_addsta_cmd;
-extern int iwl3945_send_add_station(struct iwl_priv *priv,
-				struct iwl3945_addsta_cmd *sta, u8 flags);
-extern u8 iwl3945_add_station(struct iwl_priv *priv, const u8 *bssid,
-			  int is_ap, u8 flags);
 extern int iwl3945_power_init_handle(struct iwl_priv *priv);
 extern int iwl3945_eeprom_init(struct iwl_priv *priv);
 extern int iwl3945_calc_db_from_ratio(int sig_ratio);
@@ -278,6 +267,8 @@ extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
 				 struct iwl_rx_mem_buffer *rxb);
 extern void iwl3945_disable_events(struct iwl_priv *priv);
 extern int iwl4965_get_temperature(const struct iwl_priv *priv);
+extern void iwl3945_post_associate(struct iwl_priv *priv);
+extern void iwl3945_config_ap(struct iwl_priv *priv);
 
 /**
  * iwl3945_hw_find_station - Find station id for a given BSSID
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 847a6220c5e..8f3d4bc6a03 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -163,10 +163,6 @@ static int iwl4965_load_bsm(struct iwl_priv *priv)
 	inst_len = priv->ucode_init.len;
 	data_len = priv->ucode_init_data.len;
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
@@ -179,10 +175,8 @@ static int iwl4965_load_bsm(struct iwl_priv *priv)
 		_iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
 
 	ret = iwl4965_verify_bsm(priv);
-	if (ret) {
-		iwl_release_nic_access(priv);
+	if (ret)
 		return ret;
-	}
 
 	/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
 	iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
@@ -211,7 +205,6 @@ static int iwl4965_load_bsm(struct iwl_priv *priv)
 	 *   (e.g. when powering back up after power-save shutdown) */
 	iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
 
-	iwl_release_nic_access(priv);
 
 	return 0;
 }
@@ -229,20 +222,12 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 {
 	dma_addr_t pinst;
 	dma_addr_t pdata;
-	unsigned long flags;
 	int ret = 0;
 
 	/* bits 35:4 for 4965 */
 	pinst = priv->ucode_code.p_addr >> 4;
 	pdata = priv->ucode_data_backup.p_addr >> 4;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	/* Tell bootstrap uCode where to find image to load */
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
@@ -253,10 +238,6 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 	 *   that all new ptr/size info is in place */
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
 				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
-	iwl_release_nic_access(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
 
 	return ret;
@@ -312,10 +293,12 @@ restart:
 	queue_work(priv->workqueue, &priv->restart);
 }
 
-static int is_fat_channel(__le32 rxon_flags)
+static bool is_fat_channel(__le32 rxon_flags)
 {
-	return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
-		(rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
+	int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
+				    >> RXON_FLG_CHANNEL_MODE_POS;
+	return ((chan_mod == CHANNEL_MODE_PURE_40) ||
+		  (chan_mod == CHANNEL_MODE_MIXED));
 }
 
 /*
@@ -358,10 +341,6 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
 		goto out;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 						APMG_CLK_VAL_BSM_CLK_RQT);
@@ -372,7 +351,6 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
 out:
 	return ret;
 }
@@ -454,11 +432,9 @@ static void iwl4965_apm_stop(struct iwl_priv *priv)
 static int iwl4965_apm_reset(struct iwl_priv *priv)
 {
 	int ret = 0;
-	unsigned long flags;
 
 	iwl4965_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
@@ -475,9 +451,6 @@ static int iwl4965_apm_reset(struct iwl_priv *priv)
 
 	udelay(10);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
 	/* Enable DMA and BSM Clock */
 	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 					      APMG_CLK_VAL_BSM_CLK_RQT);
@@ -488,14 +461,10 @@ static int iwl4965_apm_reset(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
-
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
 out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return ret;
 }
 
@@ -681,18 +650,11 @@ static int iwl4965_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
 	unsigned long flags;
-	int ret;
 	int i, chan;
 	u32 reg_val;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	/* Clear 4965's internal Tx Scheduler data base */
 	priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
 	a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
@@ -759,10 +721,9 @@ static int iwl4965_alive_notify(struct iwl_priv *priv)
 		iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
 	}
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return ret;
+	return 0;
 }
 
 static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
@@ -788,6 +749,12 @@ static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
 	.nrg_th_ofdm = 100,
 };
 
+static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Kelvin */
+	priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
+}
+
 /**
  * iwl4965_hw_set_hw_params
  *
@@ -822,7 +789,8 @@ static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.rx_chains_num = 2;
 	priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
 	priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
-	priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 
 	priv->hw_params.sens = &iwl4965_sensitivity;
 
@@ -1524,7 +1492,7 @@ static int iwl4965_send_tx_power(struct iwl_priv *priv)
 	struct iwl4965_txpowertable_cmd cmd = { 0 };
 	int ret;
 	u8 band = 0;
-	u8 is_fat = 0;
+	bool is_fat = false;
 	u8 ctrl_chan_high = 0;
 
 	if (test_bit(STATUS_SCANNING, &priv->status)) {
@@ -1602,7 +1570,7 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 {
 	int rc;
 	u8 band = 0;
-	u8 is_fat = 0;
+	bool is_fat = false;
 	u8 ctrl_chan_high = 0;
 	struct iwl4965_channel_switch_cmd cmd = { 0 };
 	const struct iwl_channel_info *ch_info;
@@ -1833,8 +1801,6 @@ static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
 static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 				   u16 ssn_idx, u8 tx_fifo)
 {
-	int ret = 0;
-
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
 		IWL_WARN(priv,
@@ -1844,10 +1810,6 @@ static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 		return -EINVAL;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl4965_tx_queue_stop_scheduler(priv, txq_id);
 
 	iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
@@ -1861,8 +1823,6 @@ static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 	iwl_txq_ctx_deactivate(priv, txq_id);
 	iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
 
-	iwl_release_nic_access(priv);
-
 	return 0;
 }
 
@@ -1904,7 +1864,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 				  int tx_fifo, int sta_id, int tid, u16 ssn_idx)
 {
 	unsigned long flags;
-	int ret;
 	u16 ra_tid;
 
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
@@ -1922,11 +1881,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
 
 	/* Stop this Tx queue before configuring it */
 	iwl4965_tx_queue_stop_scheduler(priv, txq_id);
@@ -1959,7 +1913,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
 	iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
@@ -2268,9 +2221,10 @@ static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
 	cancel_work_sync(&priv->txpower_work);
 }
 
-
 static struct iwl_hcmd_ops iwl4965_hcmd = {
 	.rxon_assoc = iwl4965_send_rxon_assoc,
+	.commit_rxon = iwl_commit_rxon,
+	.set_rxon_chain = iwl_set_rxon_chain,
 };
 
 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
@@ -2323,7 +2277,13 @@ static struct iwl_lib_ops iwl4965_lib = {
 	},
 	.send_tx_power	= iwl4965_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
-	.temperature = iwl4965_temperature_calib,
+	.post_associate = iwl_post_associate,
+	.config_ap = iwl_config_ap,
+	.isr = iwl_isr_legacy,
+	.temp_ops = {
+		.temperature = iwl4965_temperature_calib,
+		.set_ct_kill = iwl4965_set_ct_threshold,
+	},
 };
 
 static struct iwl_ops iwl4965_ops = {
@@ -2343,6 +2303,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
 	.ops = &iwl4965_ops,
 	.mod_params = &iwl4965_mod_params,
+	.use_isr_legacy = true
 };
 
 /* Module firmware */
@@ -2350,8 +2311,6 @@ MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
 
 module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
 module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
index 15cac70e36e..4ef6804a455 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
@@ -87,6 +87,18 @@
 #define IWL50_NUM_AMPDU_QUEUES		  10
 #define IWL50_FIRST_AMPDU_QUEUE		  10
 
+/* 5150 only */
+#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)
+
+static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
+{
+	u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
+						       EEPROM_5000_TEMPERATURE);
+	/* offset =  temperature -  voltage / coef */
+	s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
+	return offset;
+}
+
 /* Fixed (non-configurable) rx data from phy */
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 9452461ce86..b3c648ce8c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -124,10 +124,6 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 		return ret;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 
@@ -137,8 +133,6 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
-
 	return ret;
 }
 
@@ -165,12 +159,9 @@ static void iwl5000_apm_stop(struct iwl_priv *priv)
 static int iwl5000_apm_reset(struct iwl_priv *priv)
 {
 	int ret = 0;
-	unsigned long flags;
 
 	iwl5000_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
 	udelay(10);
@@ -193,10 +184,6 @@ static int iwl5000_apm_reset(struct iwl_priv *priv)
 		goto out;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 
@@ -205,11 +192,7 @@ static int iwl5000_apm_reset(struct iwl_priv *priv)
 	/* disable L1-Active */
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-	iwl_release_nic_access(priv);
-
 out:
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return ret;
 }
@@ -252,11 +235,9 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 	 * (PCIe power is lost before PERST# is asserted),
 	 * causing ME FW to lose ownership and not being able to obtain it back.
 	 */
-	iwl_grab_nic_access(priv);
 	iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
 				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
-	iwl_release_nic_access(priv);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -434,15 +415,19 @@ static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
 	return &priv->eeprom[address];
 }
 
-static s32 iwl5150_get_ct_threshold(struct iwl_priv *priv)
+static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
 {
-	const s32 volt2temp_coef = -5;
-	u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
-						EEPROM_5000_TEMPERATURE);
-	/* offset =  temperate -  voltage / coef */
-	s32 offset = temp_calib[0] - temp_calib[1] / volt2temp_coef;
-	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD) - offset;
-	return threshold * volt2temp_coef;
+	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
+	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD) -
+			iwl_temp_calib_to_offset(priv);
+
+	priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
+}
+
+static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
 }
 
 /*
@@ -533,19 +518,9 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 				struct fw_desc *image,
 				u32 dst_addr)
 {
-	int ret = 0;
-	unsigned long flags;
-
 	dma_addr_t phy_addr = image->p_addr;
 	u32 byte_cnt = image->len;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	iwl_write_direct32(priv,
 		FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
 		FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE);
@@ -574,8 +549,6 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 		FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE	|
 		FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
 	return 0;
 }
 
@@ -736,18 +709,11 @@ static int iwl5000_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
 	unsigned long flags;
-	int ret;
 	int i, chan;
 	u32 reg_val;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	priv->scd_base_addr = iwl_read_prph(priv, IWL50_SCD_SRAM_BASE_ADDR);
 	a = priv->scd_base_addr + IWL50_SCD_CONTEXT_DATA_OFFSET;
 	for (; a < priv->scd_base_addr + IWL50_SCD_TX_STTS_BITMAP_OFFSET;
@@ -815,7 +781,6 @@ static int iwl5000_alive_notify(struct iwl_priv *priv)
 	iwl_txq_ctx_activate(priv, 8);
 	iwl_txq_ctx_activate(priv, 9);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 
@@ -868,17 +833,8 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_5150:
-		/* 5150 wants in Kelvin */
-		priv->hw_params.ct_kill_threshold =
-				iwl5150_get_ct_threshold(priv);
-		break;
-	default:
-		/* all others want Celsius */
-		priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
-		break;
-	}
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 
 	/* Set initial calibration set */
 	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
@@ -900,7 +856,6 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 		break;
 	}
 
-
 	return 0;
 }
 
@@ -1006,7 +961,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 				  int tx_fifo, int sta_id, int tid, u16 ssn_idx)
 {
 	unsigned long flags;
-	int ret;
 	u16 ra_tid;
 
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
@@ -1024,11 +978,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
 
 	/* Stop this Tx queue before configuring it */
 	iwl5000_tx_queue_stop_scheduler(priv, txq_id);
@@ -1064,7 +1013,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
 	iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
@@ -1073,8 +1021,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 				   u16 ssn_idx, u8 tx_fifo)
 {
-	int ret;
-
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
 		IWL_ERR(priv,
@@ -1084,10 +1030,6 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 		return -EINVAL;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl5000_tx_queue_stop_scheduler(priv, txq_id);
 
 	iwl_clear_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1 << txq_id));
@@ -1101,15 +1043,16 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 	iwl_txq_ctx_deactivate(priv, txq_id);
 	iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
 
-	iwl_release_nic_access(priv);
-
 	return 0;
 }
 
 u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
 	u16 size = (u16)sizeof(struct iwl_addsta_cmd);
-	memcpy(data, cmd, size);
+	struct iwl_addsta_cmd *addsta = (struct iwl_addsta_cmd *)data;
+	memcpy(addsta, cmd, size);
+	/* resrved in 5000 */
+	addsta->rate_n_flags = cpu_to_le16(0);
 	return size;
 }
 
@@ -1434,6 +1377,17 @@ static void iwl5000_temperature(struct iwl_priv *priv)
 	priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
 }
 
+static void iwl5150_temperature(struct iwl_priv *priv)
+{
+	u32 vt = 0;
+	s32 offset =  iwl_temp_calib_to_offset(priv);
+
+	vt = le32_to_cpu(priv->statistics.general.temperature);
+	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
+	/* now vt hold the temperature in Kelvin */
+	priv->temperature = KELVIN_TO_CELSIUS(vt);
+}
+
 /* Calc max signal level (dBm) among 3 possible receivers */
 int iwl5000_calc_rssi(struct iwl_priv *priv,
 			     struct iwl_rx_phy_res *rx_resp)
@@ -1474,6 +1428,8 @@ int iwl5000_calc_rssi(struct iwl_priv *priv,
 
 struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
+	.commit_rxon = iwl_commit_rxon,
+	.set_rxon_chain = iwl_set_rxon_chain,
 };
 
 struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
@@ -1502,7 +1458,6 @@ struct iwl_lib_ops iwl5000_lib = {
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
-	.temperature = iwl5000_temperature,
 	.update_chain_flags = iwl_update_chain_flags,
 	.apm_ops = {
 		.init =	iwl5000_apm_init,
@@ -1527,6 +1482,63 @@ struct iwl_lib_ops iwl5000_lib = {
 		.calib_version	= iwl5000_eeprom_calib_version,
 		.query_addr = iwl5000_eeprom_query_addr,
 	},
+	.post_associate = iwl_post_associate,
+	.isr = iwl_isr_ict,
+	.config_ap = iwl_config_ap,
+	.temp_ops = {
+		.temperature = iwl5000_temperature,
+		.set_ct_kill = iwl5000_set_ct_threshold,
+	 },
+};
+
+static struct iwl_lib_ops iwl5150_lib = {
+	.set_hw_params = iwl5000_hw_set_hw_params,
+	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
+	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
+	.txq_set_sched = iwl5000_txq_set_sched,
+	.txq_agg_enable = iwl5000_txq_agg_enable,
+	.txq_agg_disable = iwl5000_txq_agg_disable,
+	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+	.txq_free_tfd = iwl_hw_txq_free_tfd,
+	.txq_init = iwl_hw_tx_queue_init,
+	.rx_handler_setup = iwl5000_rx_handler_setup,
+	.setup_deferred_work = iwl5000_setup_deferred_work,
+	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+	.load_ucode = iwl5000_load_ucode,
+	.init_alive_start = iwl5000_init_alive_start,
+	.alive_notify = iwl5000_alive_notify,
+	.send_tx_power = iwl5000_send_tx_power,
+	.update_chain_flags = iwl_update_chain_flags,
+	.apm_ops = {
+		.init =	iwl5000_apm_init,
+		.reset = iwl5000_apm_reset,
+		.stop = iwl5000_apm_stop,
+		.config = iwl5000_nic_config,
+		.set_pwr_src = iwl_set_pwr_src,
+	},
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_5000_REG_BAND_1_CHANNELS,
+			EEPROM_5000_REG_BAND_2_CHANNELS,
+			EEPROM_5000_REG_BAND_3_CHANNELS,
+			EEPROM_5000_REG_BAND_4_CHANNELS,
+			EEPROM_5000_REG_BAND_5_CHANNELS,
+			EEPROM_5000_REG_BAND_24_FAT_CHANNELS,
+			EEPROM_5000_REG_BAND_52_FAT_CHANNELS
+		},
+		.verify_signature  = iwlcore_eeprom_verify_signature,
+		.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+		.release_semaphore = iwlcore_eeprom_release_semaphore,
+		.calib_version	= iwl5000_eeprom_calib_version,
+		.query_addr = iwl5000_eeprom_query_addr,
+	},
+	.post_associate = iwl_post_associate,
+	.isr = iwl_isr_ict,
+	.config_ap = iwl_config_ap,
+	.temp_ops = {
+		.temperature = iwl5150_temperature,
+		.set_ct_kill = iwl5150_set_ct_threshold,
+	 },
 };
 
 struct iwl_ops iwl5000_ops = {
@@ -1535,6 +1547,12 @@ struct iwl_ops iwl5000_ops = {
 	.utils = &iwl5000_hcmd_utils,
 };
 
+static struct iwl_ops iwl5150_ops = {
+	.lib = &iwl5150_lib,
+	.hcmd = &iwl5000_hcmd,
+	.utils = &iwl5000_hcmd_utils,
+};
+
 struct iwl_mod_params iwl50_mod_params = {
 	.num_of_queues = IWL50_NUM_QUEUES,
 	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
@@ -1630,7 +1648,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
 	.ucode_api_max = IWL5150_UCODE_API_MAX,
 	.ucode_api_min = IWL5150_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl5000_ops,
+	.ops = &iwl5150_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
@@ -1643,9 +1661,6 @@ struct iwl_cfg iwl5150_agn_cfg = {
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
 
-module_param_named(disable50, iwl50_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable50,
-		  "manually disable the 50XX radio (default 0 [radio on])");
 module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
 MODULE_PARM_DESC(swcrypto50,
 		  "using software crypto engine (default 0 [hardware])\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index cab7842a73a..ff20e5048a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -52,7 +52,7 @@
 /* max allowed rate miss before sync LQ cmd */
 #define IWL_MISSED_RATE_MAX		15
 /* max time to accum history 2 seconds */
-#define IWL_RATE_SCALE_FLUSH_INTVL   (2*HZ)
+#define IWL_RATE_SCALE_FLUSH_INTVL   (3*HZ)
 
 static u8 rs_ht_to_legacy[] = {
 	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
@@ -100,6 +100,7 @@ struct iwl_scale_tbl_info {
 	u8 is_fat;	/* 1 = 40 MHz channel width */
 	u8 is_dup;	/* 1 = duplicated data streams */
 	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	u8 max_search;	/* maximun number of tables we can search */
 	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
 	u32 current_rate;  /* rate_n_flags, uCode API format */
 	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
@@ -135,7 +136,7 @@ struct iwl_lq_sta {
 	u32 table_count;
 	u32 total_failed;	/* total failed frames, any/all rates */
 	u32 total_success;	/* total successful frames, any/all rates */
-	u32 flush_timer;	/* time staying in mode before new search */
+	u64 flush_timer;	/* time staying in mode before new search */
 
 	u8 action_counter;	/* # mode-switch actions tried */
 	u8 is_green;
@@ -160,6 +161,7 @@ struct iwl_lq_sta {
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct dentry *rs_sta_dbgfs_scale_table_file;
 	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
 	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
 	u32 dbg_fixed_rate;
 #endif
@@ -167,10 +169,12 @@ struct iwl_lq_sta {
 
 	/* used to be in sta_info */
 	int last_txrate_idx;
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
 };
 
 static void rs_rate_scale_perform(struct iwl_priv *priv,
-				   struct ieee80211_hdr *hdr,
+				   struct sk_buff *skb,
 				   struct ieee80211_sta *sta,
 				   struct iwl_lq_sta *lq_sta);
 static void rs_fill_link_cmd(const struct iwl_priv *priv,
@@ -191,7 +195,7 @@ static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
  * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
  * "G" is the only table that supports CCK (the first 4 rates).
  */
-/*FIXME:RS:need to separate tables for MIMO2/MIMO3*/
+
 static s32 expected_tpt_A[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
 };
@@ -208,11 +212,11 @@ static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
 };
 
-static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_20MHz[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
 };
 
-static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_20MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
 };
 
@@ -224,14 +228,50 @@ static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
 };
 
-static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_40MHz[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
 };
 
-static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_40MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
 };
 
+/* Expected throughput metric MIMO3 */
+static s32 expected_tpt_mimo3_20MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 99, 99, 153, 186, 208, 239, 256, 263, 268
+};
+
+static s32 expected_tpt_mimo3_20MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 106, 106, 162, 194, 215, 246, 262, 268, 273
+};
+
+static s32 expected_tpt_mimo3_40MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 152, 152, 211, 239, 255, 279, 290, 294, 297
+};
+
+static s32 expected_tpt_mimo3_40MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 160, 160, 219, 245, 261, 284, 294, 297, 300
+};
+
+/* mbps, mcs */
+const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+  {"1", ""},
+  {"2", ""},
+  {"5.5", ""},
+  {"11", ""},
+  {"6", "BPSK 1/2"},
+  {"9", "BPSK 1/2"},
+  {"12", "QPSK 1/2"},
+  {"18", "QPSK 3/4"},
+  {"24", "16QAM 1/2"},
+  {"36", "16QAM 3/4"},
+  {"48", "64QAM 2/3"},
+  {"54", "64QAM 3/4"},
+  {"60", "64QAM 5/6"}
+};
+
+#define MCS_INDEX_PER_STREAM	(8)
+
 static inline u8 rs_extract_rate(u32 rate_n_flags)
 {
 	return (u8)(rate_n_flags & 0xFF);
@@ -543,6 +583,7 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
 	tbl->is_dup = 0;
 	tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
 	tbl->lq_type = LQ_NONE;
+	tbl->max_search = IWL_MAX_SEARCH;
 
 	/* legacy rate format */
 	if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
@@ -576,8 +617,10 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
 				tbl->lq_type = LQ_MIMO2;
 		/* MIMO3 */
 		} else {
-			if (num_of_ant == 3)
+			if (num_of_ant == 3) {
+				tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
 				tbl->lq_type = LQ_MIMO3;
+			}
 		}
 	}
 	return 0;
@@ -611,19 +654,19 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
 	return 1;
 }
 
-/* FIXME:RS: in 4965 we don't use greenfield at all */
-/* FIXME:RS: don't use greenfield for now in TX */
-#if 0
-static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
+/* in 4965 we don't use greenfield at all */
+static inline u8 rs_use_green(struct iwl_priv *priv,
+			      struct ieee80211_conf *conf)
 {
-	return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
-		priv->current_ht_config.is_green_field &&
-		!priv->current_ht_config.non_GF_STA_present;
-}
-#endif
-static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
-{
-	return 0;
+	u8 is_green;
+
+	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+		is_green = 0;
+	else
+		is_green = (conf_is_ht(conf) &&
+			   priv->current_ht_config.is_green_field &&
+			   !priv->current_ht_config.non_GF_STA_present);
+	return is_green;
 }
 
 /**
@@ -735,6 +778,7 @@ static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
 
 		tbl->is_fat = 0;
 		tbl->is_SGI = 0;
+		tbl->max_search = IWL_MAX_SEARCH;
 	}
 
 	rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
@@ -793,7 +837,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
 
 	if (!ieee80211_is_data(hdr->frame_control) ||
-	    is_multicast_ether_addr(hdr->addr1))
+	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
 	/* This packet was aggregated but doesn't carry rate scale info */
@@ -902,6 +946,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 	 * else look up the rate that was, finally, successful.
 	 */
 	tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
+	lq_sta->last_rate_n_flags = tx_rate;
 	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
 
 	/* Update frame history window with "success" if Tx got ACKed ... */
@@ -958,7 +1003,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 
 	/* See if there's a better rate or modulation mode to try. */
 	if (sta && sta->supp_rates[sband->band])
-		rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+		rs_rate_scale_perform(priv, skb, sta, lq_sta);
 out:
 	return;
 }
@@ -988,6 +1033,8 @@ static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
 	lq_sta->table_count = 0;
 	lq_sta->total_failed = 0;
 	lq_sta->total_success = 0;
+	lq_sta->flush_timer = jiffies;
+	lq_sta->action_counter = 0;
 }
 
 /*
@@ -1011,17 +1058,26 @@ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
 			tbl->expected_tpt = expected_tpt_siso20MHzSGI;
 		else
 			tbl->expected_tpt = expected_tpt_siso20MHz;
-
-	} else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */
+	} else if (is_mimo2(tbl->lq_type)) {
 		if (tbl->is_fat && !lq_sta->is_dup)
 			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
+				tbl->expected_tpt = expected_tpt_mimo2_40MHzSGI;
 			else
-				tbl->expected_tpt = expected_tpt_mimo40MHz;
+				tbl->expected_tpt = expected_tpt_mimo2_40MHz;
 		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
+			tbl->expected_tpt = expected_tpt_mimo2_20MHzSGI;
 		else
-			tbl->expected_tpt = expected_tpt_mimo20MHz;
+			tbl->expected_tpt = expected_tpt_mimo2_20MHz;
+	} else if (is_mimo3(tbl->lq_type)) {
+		if (tbl->is_fat && !lq_sta->is_dup)
+			if (tbl->is_SGI)
+				tbl->expected_tpt = expected_tpt_mimo3_40MHzSGI;
+			else
+				tbl->expected_tpt = expected_tpt_mimo3_40MHz;
+		else if (tbl->is_SGI)
+			tbl->expected_tpt = expected_tpt_mimo3_20MHzSGI;
+		else
+			tbl->expected_tpt = expected_tpt_mimo3_20MHz;
 	} else
 		tbl->expected_tpt = expected_tpt_G;
 }
@@ -1130,7 +1186,7 @@ static s32 rs_get_best_rate(struct iwl_priv *priv,
 }
 
 /*
- * Set up search table for MIMO
+ * Set up search table for MIMO2
  */
 static int rs_switch_to_mimo2(struct iwl_priv *priv,
 			     struct iwl_lq_sta *lq_sta,
@@ -1158,10 +1214,10 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	tbl->lq_type = LQ_MIMO2;
 	tbl->is_dup = lq_sta->is_dup;
 	tbl->action = 0;
+	tbl->max_search = IWL_MAX_SEARCH;
 	rate_mask = lq_sta->active_mimo2_rate;
 
-	if (priv->current_ht_config.supported_chan_width
-					== IWL_CHANNEL_WIDTH_40MHZ)
+	if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
 		tbl->is_fat = 1;
 	else
 		tbl->is_fat = 0;
@@ -1183,7 +1239,73 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
 
 	IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
+						rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
+
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Set up search table for MIMO3
+ */
+static int rs_switch_to_mimo3(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct ieee80211_sta *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	s32 rate;
+	s8 is_green = lq_sta->is_green;
+
+	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+		return -1;
+
+	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
+						== WLAN_HT_CAP_SM_PS_STATIC)
+		return -1;
+
+	/* Need both Tx chains/antennas to support MIMO */
+	if (priv->hw_params.tx_chains_num < 3)
+		return -1;
+
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n");
+
+	tbl->lq_type = LQ_MIMO3;
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->action = 0;
+	tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
+	rate_mask = lq_sta->active_mimo3_rate;
+
+	if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
+		tbl->is_fat = 1;
+	else
+		tbl->is_fat = 0;
 
+	/* FIXME: - don't toggle SGI here
+	if (tbl->is_fat) {
+		if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
+			tbl->is_SGI = 1;
+		else
+			tbl->is_SGI = 0;
+	} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
+		tbl->is_SGI = 1;
+	else
+		tbl->is_SGI = 0;
+	*/
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n",
+		rate, rate_mask);
 	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
 		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
 						rate, rate_mask);
@@ -1217,10 +1339,10 @@ static int rs_switch_to_siso(struct iwl_priv *priv,
 	tbl->is_dup = lq_sta->is_dup;
 	tbl->lq_type = LQ_SISO;
 	tbl->action = 0;
+	tbl->max_search = IWL_MAX_SEARCH;
 	rate_mask = lq_sta->active_siso_rate;
 
-	if (priv->current_ht_config.supported_chan_width
-	    == IWL_CHANNEL_WIDTH_40MHZ)
+	if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
 		tbl->is_fat = 1;
 	else
 		tbl->is_fat = 0;
@@ -1274,15 +1396,15 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	u8 tx_chains_num = priv->hw_params.tx_chains_num;
 	int ret = 0;
+	u8 update_search_tbl_counter = 0;
 
 	for (; ;) {
+		lq_sta->action_counter++;
 		switch (tbl->action) {
 		case IWL_LEGACY_SWITCH_ANTENNA1:
 		case IWL_LEGACY_SWITCH_ANTENNA2:
 			IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
 
-			lq_sta->action_counter++;
-
 			if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
 							tx_chains_num <= 1) ||
 			    (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
@@ -1298,6 +1420,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 
 			if (rs_toggle_antenna(valid_tx_ant,
 				&search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
 				rs_set_expected_tpt_table(lq_sta, search_tbl);
 				goto out;
 			}
@@ -1342,9 +1465,29 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 				goto out;
 			}
 			break;
+
+		case IWL_LEGACY_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n");
+
+			/* Set up search table to try MIMO3 */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+			break;
 		}
 		tbl->action++;
-		if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC)
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
 			tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
 
 		if (tbl->action == start_action)
@@ -1357,8 +1500,10 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 out:
 	lq_sta->search_better_tbl = 1;
 	tbl->action++;
-	if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC)
+	if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
 		tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
 	return 0;
 
 }
@@ -1381,6 +1526,7 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
 	u8 start_action = tbl->action;
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	u8 update_search_tbl_counter = 0;
 	int ret;
 
 	for (;;) {
@@ -1401,8 +1547,10 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
 
 			memcpy(search_tbl, tbl, sz);
 			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl))
+				       &search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
 				goto out;
+			}
 			break;
 		case IWL_SISO_SWITCH_MIMO2_AB:
 		case IWL_SISO_SWITCH_MIMO2_AC:
@@ -1456,10 +1604,25 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
 			search_tbl->current_rate =
 				rate_n_flags_from_tbl(priv, search_tbl,
 						      index, is_green);
+			update_search_tbl_counter = 1;
 			goto out;
+		case IWL_SISO_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+			break;
 		}
 		tbl->action++;
-		if (tbl->action > IWL_SISO_SWITCH_GI)
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
 			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
 
 		if (tbl->action == start_action)
@@ -1471,15 +1634,18 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
  out:
 	lq_sta->search_better_tbl = 1;
 	tbl->action++;
-	if (tbl->action > IWL_SISO_SWITCH_GI)
+	if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC)
 		tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
 	return 0;
 }
 
 /*
- * Try to switch to new modulation mode from MIMO
+ * Try to switch to new modulation mode from MIMO2
  */
-static int rs_move_mimo_to_other(struct iwl_priv *priv,
+static int rs_move_mimo2_to_other(struct iwl_priv *priv,
 				 struct iwl_lq_sta *lq_sta,
 				 struct ieee80211_conf *conf,
 				 struct ieee80211_sta *sta, int index)
@@ -1494,6 +1660,7 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 	u8 start_action = tbl->action;
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	u8 update_search_tbl_counter = 0;
 	int ret;
 
 	for (;;) {
@@ -1501,7 +1668,7 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 		switch (tbl->action) {
 		case IWL_MIMO2_SWITCH_ANTENNA1:
 		case IWL_MIMO2_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO toggle Antennas\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n");
 
 			if (tx_chains_num <= 2)
 				break;
@@ -1511,8 +1678,10 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 
 			memcpy(search_tbl, tbl, sz);
 			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl))
+				       &search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
 				goto out;
+			}
 			break;
 		case IWL_MIMO2_SWITCH_SISO_A:
 		case IWL_MIMO2_SWITCH_SISO_B:
@@ -1549,9 +1718,9 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 						HT_SHORT_GI_40MHZ))
 				break;
 
-			IWL_DEBUG_RATE(priv, "LQ: MIMO toggle SGI/NGI\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
 
-			/* Set up new search table for MIMO */
+			/* Set up new search table for MIMO2 */
 			memcpy(search_tbl, tbl, sz);
 			search_tbl->is_SGI = !tbl->is_SGI;
 			rs_set_expected_tpt_table(lq_sta, search_tbl);
@@ -1569,11 +1738,27 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 			search_tbl->current_rate =
 				rate_n_flags_from_tbl(priv, search_tbl,
 						      index, is_green);
+			update_search_tbl_counter = 1;
 			goto out;
 
+		case IWL_MIMO2_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
 		}
 		tbl->action++;
-		if (tbl->action > IWL_MIMO2_SWITCH_GI)
+		if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
 			tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
 
 		if (tbl->action == start_action)
@@ -1584,8 +1769,153 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
  out:
 	lq_sta->search_better_tbl = 1;
 	tbl->action++;
-	if (tbl->action > IWL_MIMO2_SWITCH_GI)
+	if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
 		tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
+	return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO3
+ */
+static int rs_move_mimo3_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct ieee80211_sta *sta, int index)
+{
+	s8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action = tbl->action;
+	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	int ret;
+	u8 update_search_tbl_counter = 0;
+
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_MIMO3_SWITCH_ANTENNA1:
+		case IWL_MIMO3_SWITCH_ANTENNA2:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
+
+			if (tx_chains_num <= 3)
+				break;
+
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+				break;
+
+			memcpy(search_tbl, tbl, sz);
+			if (rs_toggle_antenna(valid_tx_ant,
+				       &search_tbl->current_rate, search_tbl))
+				goto out;
+			break;
+		case IWL_MIMO3_SWITCH_SISO_A:
+		case IWL_MIMO3_SWITCH_SISO_B:
+		case IWL_MIMO3_SWITCH_SISO_C:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
+
+			/* Set up new search table for SISO */
+			memcpy(search_tbl, tbl, sz);
+
+			if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
+				search_tbl->ant_type = ANT_A;
+			else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
+				search_tbl->ant_type = ANT_B;
+			else
+				search_tbl->ant_type = ANT_C;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO3_SWITCH_MIMO2_AB:
+		case IWL_MIMO3_SWITCH_MIMO2_AC:
+		case IWL_MIMO3_SWITCH_MIMO2_BC:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
+
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
+				search_tbl->ant_type = ANT_AB;
+			else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
+				search_tbl->ant_type = ANT_AC;
+			else
+				search_tbl->ant_type = ANT_BC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO3_SWITCH_GI:
+			if (!tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_20MHZ))
+				break;
+			if (tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_40MHZ))
+				break;
+
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
+
+			/* Set up new search table for MIMO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			/*
+			 * If active table already uses the fastest possible
+			 * modulation (dual stream with short guard interval),
+			 * and it's working well, there's no need to look
+			 * for a better type of modulation!
+			 */
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate =
+				rate_n_flags_from_tbl(priv, search_tbl,
+						      index, is_green);
+			update_search_tbl_counter = 1;
+			goto out;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_MIMO3_SWITCH_GI)
+			tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+
+		if (tbl->action == start_action)
+			break;
+	}
+	search_tbl->lq_type = LQ_NONE;
+	return 0;
+ out:
+	lq_sta->search_better_tbl = 1;
+	tbl->action++;
+	if (tbl->action > IWL_MIMO3_SWITCH_GI)
+		tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
 	return 0;
 
 }
@@ -1616,8 +1946,8 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
 		/* Elapsed time using current modulation mode */
 		if (lq_sta->flush_timer)
 			flush_interval_passed =
-			    time_after(jiffies,
-				       (unsigned long)(lq_sta->flush_timer +
+			time_after(jiffies,
+					(unsigned long)(lq_sta->flush_timer +
 					IWL_RATE_SCALE_FLUSH_INTVL));
 
 		/*
@@ -1676,12 +2006,14 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
  * Do rate scaling and search for new modulation mode.
  */
 static void rs_rate_scale_perform(struct iwl_priv *priv,
-				  struct ieee80211_hdr *hdr,
+				  struct sk_buff *skb,
 				  struct ieee80211_sta *sta,
 				  struct iwl_lq_sta *lq_sta)
 {
 	struct ieee80211_hw *hw = priv->hw;
 	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	int low = IWL_RATE_INVALID;
 	int high = IWL_RATE_INVALID;
 	int index;
@@ -1707,11 +2039,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 
 	IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
 
-	/* Send management frames and broadcast/multicast data using
-	 * lowest rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	/* TODO: this could probably be improved.. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
-	    is_multicast_ether_addr(hdr->addr1))
+	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
 	if (!sta || !lq_sta)
@@ -1732,6 +2063,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 		active_tbl = 1 - lq_sta->active_tbl;
 
 	tbl = &(lq_sta->lq_info[active_tbl]);
+	if (is_legacy(tbl->lq_type))
+		lq_sta->is_green = 0;
+	else
+		lq_sta->is_green = rs_use_green(priv, conf);
 	is_green = lq_sta->is_green;
 
 	/* current tx rate */
@@ -1951,6 +2286,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 			update_lq = 1;
 			index = low;
 		}
+
 		break;
 	case 1:
 		/* Increase starting rate, update uCode's rate table */
@@ -1997,8 +2333,10 @@ lq_update:
 			rs_move_legacy_other(priv, lq_sta, conf, sta, index);
 		else if (is_siso(tbl->lq_type))
 			rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
+		else if (is_mimo2(tbl->lq_type))
+			rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index);
 		else
-			rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
+			rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index);
 
 		/* If new "search" mode was selected, set up in uCode table */
 		if (lq_sta->search_better_tbl) {
@@ -2014,8 +2352,11 @@ lq_update:
 				     tbl->current_rate, index);
 			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
 			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
-		}
+		} else
+			done_search = 1;
+	}
 
+	if (done_search && !lq_sta->stay_in_tbl) {
 		/* If the "active" (non-search) mode was legacy,
 		 * and we've tried switching antennas,
 		 * but we haven't been able to try HT modes (not available),
@@ -2023,8 +2364,7 @@ lq_update:
 		 * before next round of mode comparisons. */
 		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
 		if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
-		    lq_sta->action_counter >= 1) {
-			lq_sta->action_counter = 0;
+		    lq_sta->action_counter > tbl1->max_search) {
 			IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
 			rs_set_stay_in_table(priv, 1, lq_sta);
 		}
@@ -2033,7 +2373,7 @@ lq_update:
 		 * have been tried and compared, stay in this best modulation
 		 * mode for a while before next round of mode comparisons. */
 		if (lq_sta->enable_counter &&
-		    (lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
+		    (lq_sta->action_counter >= tbl1->max_search)) {
 			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
 			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
 			    (tid != MAX_TID_COUNT)) {
@@ -2047,20 +2387,8 @@ lq_update:
 							  lq_sta, sta);
 				}
 			}
-			lq_sta->action_counter = 0;
 			rs_set_stay_in_table(priv, 0, lq_sta);
 		}
-
-	/*
-	 * Else, don't search for a new modulation mode.
-	 * Put new timestamp in stay-in-modulation-mode flush timer if:
-	 * 1)  Not changing rates right now
-	 * 2)  Not just finishing up a search
-	 * 3)  flush timer is empty
-	 */
-	} else {
-		if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
-			lq_sta->flush_timer = jiffies;
 	}
 
 out:
@@ -2156,16 +2484,17 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 	if (sta)
 		mask_bit = sta->supp_rates[sband->band];
 
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
-	    is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
+	    info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) {
 		if (!mask_bit)
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, NULL);
 		else
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, sta);
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			info->control.rates[0].count = 1;
 		return;
 	}
 
@@ -2178,8 +2507,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
 				       hdr->addr1);
-			sta_id = iwl_add_station_flags(priv, hdr->addr1,
-							0, CMD_ASYNC, NULL);
+			sta_id = iwl_add_station(priv, hdr->addr1,
+						false, CMD_ASYNC, NULL);
 		}
 		if ((sta_id != IWL_INVALID_STATION)) {
 			lq_sta->lq.sta_id = sta_id;
@@ -2189,12 +2518,33 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 		}
 	}
 
-	if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT)
-		rate_idx = rate_lowest_index(sband, sta);
-	else if (sband->band == IEEE80211_BAND_5GHZ)
+	if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
 		rate_idx -= IWL_FIRST_OFDM_RATE;
-
+		/* 6M and 9M shared same MCS index */
+		rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
+		if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
+		    IWL_RATE_MIMO3_6M_PLCP)
+			rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM);
+		else if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
+			 IWL_RATE_MIMO2_6M_PLCP)
+			rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
+		info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_FAT_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
+	} else {
+		if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT)
+			rate_idx = rate_lowest_index(sband, sta);
+		else if (sband->band == IEEE80211_BAND_5GHZ)
+			rate_idx -= IWL_FIRST_OFDM_RATE;
+	}
 	info->control.rates[0].idx = rate_idx;
+
 }
 
 static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
@@ -2246,15 +2596,16 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 
 	lq_sta->ibss_sta_added = 0;
 	if (priv->iw_mode == NL80211_IFTYPE_AP) {
-		u8 sta_id = iwl_find_station(priv, sta->addr);
+		u8 sta_id = iwl_find_station(priv,
+								sta->addr);
 
 		/* for IBSS the call are from tasklet */
 		IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
 
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
-			sta_id = iwl_add_station_flags(priv, sta->addr,
-							0, CMD_ASYNC, NULL);
+			sta_id = iwl_add_station(priv, sta->addr, false,
+						CMD_ASYNC, NULL);
 		}
 		if ((sta_id != IWL_INVALID_STATION)) {
 			lq_sta->lq.sta_id = sta_id;
@@ -2436,9 +2787,10 @@ static void rs_fill_link_cmd(const struct iwl_priv *priv,
 		repeat_rate--;
 	}
 
-	lq_cmd->agg_params.agg_frame_cnt_limit = 64;
-	lq_cmd->agg_params.agg_dis_start_th = 3;
-	lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
+	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_MAX;
+	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+	lq_cmd->agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
 }
 
 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
@@ -2539,6 +2891,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 	char *buff;
 	int desc = 0;
 	int i = 0;
+	int index = 0;
 	ssize_t ret;
 
 	struct iwl_lq_sta *lq_sta = file->private_data;
@@ -2568,8 +2921,11 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 		   ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
 		   desc += sprintf(buff+desc, " %s",
 		   (tbl->is_fat) ? "40MHz" : "20MHz");
-		desc += sprintf(buff+desc, " %s\n", (tbl->is_SGI) ? "SGI" : "");
+		   desc += sprintf(buff+desc, " %s %s\n", (tbl->is_SGI) ? "SGI" : "",
+		   (lq_sta->is_green) ? "GF enabled" : "");
 	}
+	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
+		lq_sta->last_rate_n_flags);
 	desc += sprintf(buff+desc, "general:"
 		"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
 		lq_sta->lq.general_params.flags,
@@ -2590,10 +2946,19 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 			lq_sta->lq.general_params.start_rate_index[2],
 			lq_sta->lq.general_params.start_rate_index[3]);
 
-
-	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
-		desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
-			i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		index = iwl_hwrate_to_plcp_idx(
+			le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+		if (is_legacy(tbl->lq_type)) {
+			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
+				iwl_rate_mcs[index].mbps);
+		} else {
+			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
+				iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs);
+		}
+	}
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
 	kfree(buff);
@@ -2620,13 +2985,14 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
 		return -ENOMEM;
 
 	for (i = 0; i < LQ_SIZE; i++) {
-		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
+		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d GF=%d\n"
 				"rate=0x%X\n",
 				lq_sta->active_tbl == i ? "*" : "x",
 				lq_sta->lq_info[i].lq_type,
 				lq_sta->lq_info[i].is_SGI,
 				lq_sta->lq_info[i].is_fat,
 				lq_sta->lq_info[i].is_dup,
+				lq_sta->is_green,
 				lq_sta->lq_info[i].current_rate);
 		for (j = 0; j < IWL_RATE_COUNT; j++) {
 			desc += sprintf(buff+desc,
@@ -2646,6 +3012,43 @@ static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
 	.open = open_file_generic,
 };
 
+static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char buff[120];
+	int desc = 0;
+	ssize_t ret;
+
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	struct iwl_priv *priv;
+	struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+
+	priv = lq_sta->drv;
+
+	if (is_Ht(tbl->lq_type))
+		desc += sprintf(buff+desc,
+				"Bit Rate= %d Mb/s\n",
+				tbl->expected_tpt[lq_sta->last_txrate_idx]);
+	else
+		desc += sprintf(buff+desc,
+				"Bit Rate= %d Mb/s\n",
+				iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
+	desc += sprintf(buff+desc,
+			"Signal Level= %d dBm\tNoise Level= %d dBm\n",
+			priv->last_rx_rssi, priv->last_rx_noise);
+	desc += sprintf(buff+desc,
+			"Tsf= 0x%llx\tBeacon time= 0x%08X\n",
+			priv->last_tsf, priv->last_beacon_time);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+	return ret;
+}
+
+static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
+	.read = rs_sta_dbgfs_rate_scale_data_read,
+	.open = open_file_generic,
+};
+
 static void rs_add_debugfs(void *priv, void *priv_sta,
 					struct dentry *dir)
 {
@@ -2656,6 +3059,9 @@ static void rs_add_debugfs(void *priv, void *priv_sta,
 	lq_sta->rs_sta_dbgfs_stats_table_file =
 		debugfs_create_file("rate_stats_table", 0600, dir,
 			lq_sta, &rs_sta_dbgfs_stats_table_ops);
+	lq_sta->rs_sta_dbgfs_rate_scale_data_file =
+		debugfs_create_file("rate_scale_data", 0600, dir,
+			lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
 	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
 		debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
 		&lq_sta->tx_agg_tid_en);
@@ -2667,6 +3073,7 @@ static void rs_remove_debugfs(void *priv, void *priv_sta)
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
 	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
 	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
 }
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index ab59acc405d..25050bf315a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -241,6 +241,7 @@ enum {
 #define IWL_LEGACY_SWITCH_MIMO2_AB      3
 #define IWL_LEGACY_SWITCH_MIMO2_AC      4
 #define IWL_LEGACY_SWITCH_MIMO2_BC      5
+#define IWL_LEGACY_SWITCH_MIMO3_ABC     6
 
 /* possible actions when in siso mode */
 #define IWL_SISO_SWITCH_ANTENNA1        0
@@ -249,6 +250,8 @@ enum {
 #define IWL_SISO_SWITCH_MIMO2_AC        3
 #define IWL_SISO_SWITCH_MIMO2_BC        4
 #define IWL_SISO_SWITCH_GI              5
+#define IWL_SISO_SWITCH_MIMO3_ABC       6
+
 
 /* possible actions when in mimo mode */
 #define IWL_MIMO2_SWITCH_ANTENNA1       0
@@ -257,6 +260,23 @@ enum {
 #define IWL_MIMO2_SWITCH_SISO_B         3
 #define IWL_MIMO2_SWITCH_SISO_C         4
 #define IWL_MIMO2_SWITCH_GI             5
+#define IWL_MIMO2_SWITCH_MIMO3_ABC      6
+
+
+/* possible actions when in mimo3 mode */
+#define IWL_MIMO3_SWITCH_ANTENNA1       0
+#define IWL_MIMO3_SWITCH_ANTENNA2       1
+#define IWL_MIMO3_SWITCH_SISO_A         2
+#define IWL_MIMO3_SWITCH_SISO_B         3
+#define IWL_MIMO3_SWITCH_SISO_C         4
+#define IWL_MIMO3_SWITCH_MIMO2_AB       5
+#define IWL_MIMO3_SWITCH_MIMO2_AC       6
+#define IWL_MIMO3_SWITCH_MIMO2_BC       7
+#define IWL_MIMO3_SWITCH_GI             8
+
+
+#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI
+#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC
 
 /*FIXME:RS:add possible actions for MIMO3*/
 
@@ -307,6 +327,13 @@ enum iwl_table_type {
 #define ANT_BC		(ANT_B | ANT_C)
 #define ANT_ABC		(ANT_AB | ANT_C)
 
+#define IWL_MAX_MCS_DISPLAY_SIZE	12
+
+struct iwl_rate_mcs_info {
+	char	mbps[IWL_MAX_MCS_DISPLAY_SIZE];
+	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
+};
+
 static inline u8 num_of_ant(u8 mask)
 {
 	return  !!((mask) & ANT_A) +
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index f46ba247577..a5637c4aa85 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -102,7 +102,7 @@ MODULE_ALIAS("iwl4965");
  * function correctly transitions out of the RXON_ASSOC_MSK state if
  * a HW tune is required based on the RXON structure changes.
  */
-static int iwl_commit_rxon(struct iwl_priv *priv)
+int iwl_commit_rxon(struct iwl_priv *priv)
 {
 	/* cast away the const for active_rxon in this function */
 	struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
@@ -190,8 +190,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv)
 
 	iwl_clear_stations_table(priv);
 
-	if (!priv->error_recovering)
-		priv->start_calib = 0;
+	priv->start_calib = 0;
 
 	/* Add the broadcast address so we can send broadcast frames */
 	if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
@@ -246,8 +245,9 @@ static int iwl_commit_rxon(struct iwl_priv *priv)
 void iwl_update_chain_flags(struct iwl_priv *priv)
 {
 
-	iwl_set_rxon_chain(priv);
-	iwl_commit_rxon(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+	iwlcore_commit_rxon(priv);
 }
 
 static void iwl_clear_free_frames(struct iwl_priv *priv)
@@ -503,24 +503,12 @@ int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 			 struct iwl_tx_queue *txq)
 {
-	int ret;
-	unsigned long flags;
 	int txq_id = txq->q.id;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	/* Circular buffer (TFD queue in DRAM) physical base address */
 	iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
 			     txq->q.dma_addr >> 8);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
@@ -531,76 +519,6 @@ int iwl_hw_tx_queue_init(struct iwl_priv *priv,
  *
  ******************************************************************************/
 
-static void iwl_ht_conf(struct iwl_priv *priv,
-			    struct ieee80211_bss_conf *bss_conf)
-{
-	struct ieee80211_sta_ht_cap *ht_conf;
-	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
-	struct ieee80211_sta *sta;
-
-	IWL_DEBUG_MAC80211(priv, "enter: \n");
-
-	if (!iwl_conf->is_ht)
-		return;
-
-
-	/*
-	 * It is totally wrong to base global information on something
-	 * that is valid only when associated, alas, this driver works
-	 * that way and I don't know how to fix it.
-	 */
-
-	rcu_read_lock();
-	sta = ieee80211_find_sta(priv->hw, priv->bssid);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-	ht_conf = &sta->ht_cap;
-
-	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
-		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
-	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
-		iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
-
-	iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
-	iwl_conf->max_amsdu_size =
-		!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
-
-	iwl_conf->supported_chan_width =
-		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
-
-	/*
-	 * XXX: The HT configuration needs to be moved into iwl_mac_config()
-	 *	to be done there correctly.
-	 */
-
-	iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
-	if (conf_is_ht40_minus(&priv->hw->conf))
-		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-	else if (conf_is_ht40_plus(&priv->hw->conf))
-		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-
-	/* If no above or below channel supplied disable FAT channel */
-	if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
-	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
-		iwl_conf->supported_chan_width = 0;
-
-	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
-
-	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
-
-	iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
-	iwl_conf->ht_protection =
-		bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
-	iwl_conf->non_GF_STA_present =
-		!!(bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
-
-	rcu_read_unlock();
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
 #define MAX_UCODE_BEACON_INTERVAL	4096
 
 static u16 iwl_adjust_beacon_interval(u16 beacon_val)
@@ -636,7 +554,8 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv)
 		beacon_int = iwl_adjust_beacon_interval(priv->beacon_int);
 		priv->rxon_timing.atim_window = 0;
 	} else {
-		beacon_int = iwl_adjust_beacon_interval(conf->beacon_int);
+		beacon_int = iwl_adjust_beacon_interval(
+			priv->vif->bss_conf.beacon_int);
 
 		/* TODO: we need to get atim_window from upper stack
 		 * for now we set to 0 */
@@ -657,23 +576,6 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv)
 			le16_to_cpu(priv->rxon_timing.atim_window));
 }
 
-static int iwl_set_mode(struct iwl_priv *priv, int mode)
-{
-	iwl_connection_init_rx_config(priv, mode);
-	iwl_set_rxon_chain(priv);
-	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
-
-	iwl_clear_stations_table(priv);
-
-	/* dont commit rxon if rf-kill is on*/
-	if (!iwl_is_ready_rf(priv))
-		return -EAGAIN;
-
-	iwl_commit_rxon(priv);
-
-	return 0;
-}
-
 /******************************************************************************
  *
  * Generic RX handler implementations
@@ -795,6 +697,7 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
+	unsigned long reg_flags;
 
 	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
 			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
@@ -806,32 +709,25 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 			    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 
-		if (!iwl_grab_nic_access(priv)) {
-			iwl_write_direct32(
-				priv, HBUS_TARG_MBX_C,
-				HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
-			iwl_release_nic_access(priv);
-		}
+		iwl_write_direct32(priv, HBUS_TARG_MBX_C,
+					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 
 		if (!(flags & RXON_CARD_DISABLED)) {
 			iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
 				    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-			if (!iwl_grab_nic_access(priv)) {
-				iwl_write_direct32(
-					priv, HBUS_TARG_MBX_C,
+			iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 
-				iwl_release_nic_access(priv);
-			}
 		}
 
 		if (flags & RF_CARD_DISABLED) {
 			iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 				    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
 			iwl_read32(priv, CSR_UCODE_DRV_GP1);
+			spin_lock_irqsave(&priv->reg_lock, reg_flags);
 			if (!iwl_grab_nic_access(priv))
 				iwl_release_nic_access(priv);
+			spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 		}
 	}
 
@@ -841,33 +737,19 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
 
-	if (flags & SW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-
 	if (!(flags & RXON_CARD_DISABLED))
 		iwl_scan_cancel(priv);
 
 	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
-	     test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
-	    (test_bit(STATUS_RF_KILL_SW, &status) !=
-	     test_bit(STATUS_RF_KILL_SW, &priv->status)))
-		queue_work(priv->workqueue, &priv->rf_kill);
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+			test_bit(STATUS_RF_KILL_HW, &priv->status));
 	else
 		wake_up_interruptible(&priv->wait_command_queue);
 }
 
 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 {
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto err;
-
 	if (src == IWL_PWR_SRC_VAUX) {
 		if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
 			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
@@ -879,10 +761,7 @@ int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 				       ~APMG_PS_CTRL_MSK_PWR_SRC);
 	}
 
-	iwl_release_nic_access(priv);
-err:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return ret;
+	return 0;
 }
 
 /**
@@ -946,6 +825,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 	unsigned long flags;
 	u8 fill_rx = 0;
 	u32 count = 8;
+	int total_empty;
 
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
 	 * buffer that the driver may process (last buffer filled by ucode). */
@@ -956,7 +836,12 @@ void iwl_rx_handle(struct iwl_priv *priv)
 	if (i == r)
 		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 
-	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - priv->rxq.write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
 		fill_rx = 1;
 
 	while (i != r) {
@@ -995,6 +880,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
 		} else {
 			/* No handling needed */
 			IWL_DEBUG_RX(priv,
@@ -1032,7 +918,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 			count++;
 			if (count >= 8) {
 				priv->rxq.read = i;
-				iwl_rx_queue_restock(priv);
+				iwl_rx_replenish_now(priv);
 				count = 0;
 			}
 		}
@@ -1040,7 +926,10 @@ void iwl_rx_handle(struct iwl_priv *priv)
 
 	/* Backtrack one entry */
 	priv->rxq.read = i;
-	iwl_rx_queue_restock(priv);
+	if (fill_rx)
+		iwl_rx_replenish_now(priv);
+	else
+		iwl_rx_queue_restock(priv);
 }
 
 /* call this function to flush any scheduled tasklet */
@@ -1051,24 +940,7 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 	tasklet_kill(&priv->irq_tasklet);
 }
 
-static void iwl_error_recovery(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
-	       sizeof(priv->staging_rxon));
-	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl_commit_rxon(priv);
-
-	iwl_rxon_add_station(priv, priv->bssid, 1);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
-	priv->error_recovering = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static void iwl_irq_tasklet(struct iwl_priv *priv)
+static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 {
 	u32 inta, handled = 0;
 	u32 inta_fh;
@@ -1116,6 +988,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		/* Tell the device to stop sending interrupts */
 		iwl_disable_interrupts(priv);
 
+		priv->isr_stats.hw++;
 		iwl_irq_handle_error(priv);
 
 		handled |= CSR_INT_BIT_HW_ERR;
@@ -1128,13 +1001,17 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (priv->debug_level & (IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD)
+		if (inta & CSR_INT_BIT_SCD) {
 			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
 				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
 
 		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE)
+		if (inta & CSR_INT_BIT_ALIVE) {
 			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
 	}
 #endif
 	/* Safely ignore these bits for debug checks below */
@@ -1150,6 +1027,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
 				hw_rf_kill ? "disable radio" : "enable radio");
 
+		priv->isr_stats.rfkill++;
+
 		/* driver only loads ucode once setting the interface up.
 		 * the driver allows loading the ucode even if the radio
 		 * is killed. Hence update the killswitch state here. The
@@ -1160,7 +1039,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 				set_bit(STATUS_RF_KILL_HW, &priv->status);
 			else
 				clear_bit(STATUS_RF_KILL_HW, &priv->status);
-			queue_work(priv->workqueue, &priv->rf_kill);
+			wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
 		}
 
 		handled |= CSR_INT_BIT_RF_KILL;
@@ -1169,6 +1048,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	/* Chip got too hot and stopped itself */
 	if (inta & CSR_INT_BIT_CT_KILL) {
 		IWL_ERR(priv, "Microcode CT kill error detected.\n");
+		priv->isr_stats.ctkill++;
 		handled |= CSR_INT_BIT_CT_KILL;
 	}
 
@@ -1176,6 +1056,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	if (inta & CSR_INT_BIT_SW_ERR) {
 		IWL_ERR(priv, "Microcode SW error detected. "
 			" Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		priv->isr_stats.sw_err = inta;
 		iwl_irq_handle_error(priv);
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
@@ -1191,6 +1073,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
 		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
 
+		priv->isr_stats.wakeup++;
+
 		handled |= CSR_INT_BIT_WAKEUP;
 	}
 
@@ -1199,23 +1083,27 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	 * notifications from uCode come through here*/
 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
 		iwl_rx_handle(priv);
+		priv->isr_stats.rx++;
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
 		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
 		/* FH finished to write, send event */
 		priv->ucode_write_complete = 1;
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
 
-	if (inta & ~handled)
+	if (inta & ~handled) {
 		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
 
-	if (inta & ~CSR_INI_SET_MASK) {
+	if (inta & ~(priv->inta_mask)) {
 		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~CSR_INI_SET_MASK);
+			 inta & ~priv->inta_mask);
 		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
 	}
 
@@ -1236,6 +1124,200 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+/* tasklet for iwlagn interrupt */
+static void iwl_irq_tasklet(struct iwl_priv *priv)
+{
+	u32 inta = 0;
+	u32 handled = 0;
+	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_mask;
+#endif
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Ack/clear/reset pending uCode interrupts.
+	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+	 */
+	iwl_write32(priv, CSR_INT, priv->inta);
+
+	inta = priv->inta;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & IWL_DL_ISR) {
+		/* just for debug */
+		inta_mask = iwl_read32(priv, CSR_INT_MASK);
+		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
+				inta, inta_mask);
+	}
+#endif
+	/* saved interrupt in inta variable now we can reset priv->inta */
+	priv->inta = 0;
+
+	/* Now service all interrupt bits discovered above. */
+	if (inta & CSR_INT_BIT_HW_ERR) {
+		IWL_ERR(priv, "Microcode HW error detected.  Restarting.\n");
+
+		/* Tell the device to stop sending interrupts */
+		iwl_disable_interrupts(priv);
+
+		priv->isr_stats.hw++;
+		iwl_irq_handle_error(priv);
+
+		handled |= CSR_INT_BIT_HW_ERR;
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		return;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & (IWL_DL_ISR)) {
+		/* NIC fires this, but we don't use it, redundant with WAKEUP */
+		if (inta & CSR_INT_BIT_SCD) {
+			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
+				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
+
+		/* Alive notification via Rx interrupt will do the real work */
+		if (inta & CSR_INT_BIT_ALIVE) {
+			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
+	}
+#endif
+	/* Safely ignore these bits for debug checks below */
+	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+	/* HW RF KILL switch toggled */
+	if (inta & CSR_INT_BIT_RF_KILL) {
+		int hw_rf_kill = 0;
+		if (!(iwl_read32(priv, CSR_GP_CNTRL) &
+				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+			hw_rf_kill = 1;
+
+		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+				hw_rf_kill ? "disable radio" : "enable radio");
+
+		priv->isr_stats.rfkill++;
+
+		/* driver only loads ucode once setting the interface up.
+		 * the driver allows loading the ucode even if the radio
+		 * is killed. Hence update the killswitch state here. The
+		 * rfkill handler will care about restarting if needed.
+		 */
+		if (!test_bit(STATUS_ALIVE, &priv->status)) {
+			if (hw_rf_kill)
+				set_bit(STATUS_RF_KILL_HW, &priv->status);
+			else
+				clear_bit(STATUS_RF_KILL_HW, &priv->status);
+			wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
+		}
+
+		handled |= CSR_INT_BIT_RF_KILL;
+	}
+
+	/* Chip got too hot and stopped itself */
+	if (inta & CSR_INT_BIT_CT_KILL) {
+		IWL_ERR(priv, "Microcode CT kill error detected.\n");
+		priv->isr_stats.ctkill++;
+		handled |= CSR_INT_BIT_CT_KILL;
+	}
+
+	/* Error detected by uCode */
+	if (inta & CSR_INT_BIT_SW_ERR) {
+		IWL_ERR(priv, "Microcode SW error detected. "
+			" Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		priv->isr_stats.sw_err = inta;
+		iwl_irq_handle_error(priv);
+		handled |= CSR_INT_BIT_SW_ERR;
+	}
+
+	/* uCode wakes up after power-down sleep */
+	if (inta & CSR_INT_BIT_WAKEUP) {
+		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
+		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
+		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
+
+		priv->isr_stats.wakeup++;
+
+		handled |= CSR_INT_BIT_WAKEUP;
+	}
+
+	/* All uCode command responses, including Tx command responses,
+	 * Rx "responses" (frame-received notification), and other
+	 * notifications from uCode come through here*/
+	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
+			CSR_INT_BIT_RX_PERIODIC)) {
+		IWL_DEBUG_ISR(priv, "Rx interrupt\n");
+		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+			handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+			iwl_write32(priv, CSR_FH_INT_STATUS,
+					CSR49_FH_INT_RX_MASK);
+		}
+		if (inta & CSR_INT_BIT_RX_PERIODIC) {
+			handled |= CSR_INT_BIT_RX_PERIODIC;
+			iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
+		}
+		/* Sending RX interrupt require many steps to be done in the
+		 * the device:
+		 * 1- write interrupt to current index in ICT table.
+		 * 2- dma RX frame.
+		 * 3- update RX shared data to indicate last write index.
+		 * 4- send interrupt.
+		 * This could lead to RX race, driver could receive RX interrupt
+		 * but the shared data changes does not reflect this.
+		 * this could lead to RX race, RX periodic will solve this race
+		 */
+		iwl_write32(priv, CSR_INT_PERIODIC_REG,
+			    CSR_INT_PERIODIC_DIS);
+		iwl_rx_handle(priv);
+		/* Only set RX periodic if real RX is received. */
+		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
+			iwl_write32(priv, CSR_INT_PERIODIC_REG,
+				    CSR_INT_PERIODIC_ENA);
+
+		priv->isr_stats.rx++;
+	}
+
+	if (inta & CSR_INT_BIT_FH_TX) {
+		iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
+		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
+		handled |= CSR_INT_BIT_FH_TX;
+		/* FH finished to write, send event */
+		priv->ucode_write_complete = 1;
+		wake_up_interruptible(&priv->wait_command_queue);
+	}
+
+	if (inta & ~handled) {
+		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
+
+	if (inta & ~(priv->inta_mask)) {
+		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
+			 inta & ~priv->inta_mask);
+	}
+
+
+	/* Re-enable all interrupts */
+	/* only Re-enable if diabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl_enable_interrupts(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+}
+
+
 /******************************************************************************
  *
  * uCode download functions
@@ -1501,10 +1583,6 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	return ret;
 }
 
-/* temporary */
-static int iwl_mac_beacon_update(struct ieee80211_hw *hw,
-				 struct sk_buff *skb);
-
 /**
  * iwl_alive_start - called after REPLY_ALIVE notification received
  *                   from protocol/runtime uCode (initialization uCode's
@@ -1561,7 +1639,10 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	} else {
 		/* Initialize our rx_config data */
 		iwl_connection_init_rx_config(priv, priv->iw_mode);
-		iwl_set_rxon_chain(priv);
+
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
 		memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
 	}
 
@@ -1571,7 +1652,7 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	iwl_reset_run_time_calib(priv);
 
 	/* Configure the adapter for unassociated operation */
-	iwl_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	/* At this point, the NIC is initialized and operational */
 	iwl_rf_kill_ct_config(priv);
@@ -1582,9 +1663,6 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
-	if (priv->error_recovering)
-		iwl_error_recovery(priv);
-
 	iwl_power_update_mode(priv, 1);
 
 	/* reassociate for ADHOC mode */
@@ -1642,36 +1720,30 @@ static void __iwl_down(struct iwl_priv *priv)
 		ieee80211_stop_queues(priv->hw);
 
 	/* If we have not previously called iwl_init() then
-	 * clear all bits but the RF Kill and SUSPEND bits and return */
+	 * clear all bits but the RF Kill bit and return */
 	if (!iwl_is_init(priv)) {
 		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 					STATUS_RF_KILL_HW |
-			       test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-					STATUS_RF_KILL_SW |
 			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 					STATUS_GEO_CONFIGURED |
-			       test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-					STATUS_IN_SUSPEND |
 			       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 					STATUS_EXIT_PENDING;
 		goto exit;
 	}
 
-	/* ...otherwise clear out all the status bits but the RF Kill and
-	 * SUSPEND bits and continue taking the NIC down. */
+	/* ...otherwise clear out all the status bits but the RF Kill
+	 * bit and continue taking the NIC down. */
 	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 				STATUS_RF_KILL_HW |
-			test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-				STATUS_RF_KILL_SW |
 			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 				STATUS_GEO_CONFIGURED |
-			test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-				STATUS_IN_SUSPEND |
 			test_bit(STATUS_FW_ERROR, &priv->status) <<
 				STATUS_FW_ERROR |
 		       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 				STATUS_EXIT_PENDING;
 
+	/* device going down, Stop using ICT table */
+	iwl_disable_ict(priv);
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_clear_bit(priv, CSR_GP_CNTRL,
 			 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
@@ -1680,18 +1752,13 @@ static void __iwl_down(struct iwl_priv *priv)
 	iwl_txq_ctx_stop(priv);
 	iwl_rxq_stop(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!iwl_grab_nic_access(priv)) {
-		iwl_write_prph(priv, APMG_CLK_DIS_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT);
-		iwl_release_nic_access(priv);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	iwl_write_prph(priv, APMG_CLK_DIS_REG,
+				APMG_CLK_VAL_DMA_CLK_RQT);
 
 	udelay(5);
 
 	/* FIXME: apm_ops.suspend(priv) */
-	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+	if (exit_pending)
 		priv->cfg->ops->lib->apm_ops.stop(priv);
 	else
 		priv->cfg->ops->lib->apm_ops.reset(priv);
@@ -1715,6 +1782,49 @@ static void iwl_down(struct iwl_priv *priv)
 	iwl_cancel_deferred_work(priv);
 }
 
+#define HW_READY_TIMEOUT (50)
+
+static int iwl_set_hw_ready(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
+
+	/* See if we got it */
+	ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+				CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+				CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+				HW_READY_TIMEOUT);
+	if (ret != -ETIMEDOUT)
+		priv->hw_ready = true;
+	else
+		priv->hw_ready = false;
+
+	IWL_DEBUG_INFO(priv, "hardware %s\n",
+		      (priv->hw_ready == 1) ? "ready" : "not ready");
+	return ret;
+}
+
+static int iwl_prepare_card_hw(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
+
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+			CSR_HW_IF_CONFIG_REG_PREPARE);
+
+	ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+			~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
+			CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
+
+	if (ret != -ETIMEDOUT)
+		iwl_set_hw_ready(priv);
+
+	return ret;
+}
+
 #define MAX_HW_RESTARTS 5
 
 static int __iwl_up(struct iwl_priv *priv)
@@ -1732,6 +1842,13 @@ static int __iwl_up(struct iwl_priv *priv)
 		return -EIO;
 	}
 
+	iwl_prepare_card_hw(priv);
+
+	if (!priv->hw_ready) {
+		IWL_WARN(priv, "Exit HW not ready\n");
+		return -EIO;
+	}
+
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -1739,9 +1856,10 @@ static int __iwl_up(struct iwl_priv *priv)
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
 	if (iwl_is_rfkill(priv)) {
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
+
 		iwl_enable_interrupts(priv);
-		IWL_WARN(priv, "Radio disabled by %s RF Kill switch\n",
-		    test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW");
+		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
 		return 0;
 	}
 
@@ -1787,9 +1905,6 @@ static int __iwl_up(struct iwl_priv *priv)
 			continue;
 		}
 
-		/* Clear out the uCode error bit if it is set */
-		clear_bit(STATUS_FW_ERROR, &priv->status);
-
 		/* start card; "initialize" will load runtime ucode */
 		iwl_nic_start(priv);
 
@@ -1836,6 +1951,9 @@ static void iwl_bg_alive_start(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
+	/* enable dram interrupt */
+	iwl_reset_ict(priv);
+
 	mutex_lock(&priv->mutex);
 	iwl_alive_start(priv);
 	mutex_unlock(&priv->mutex);
@@ -1874,7 +1992,6 @@ static void iwl_bg_up(struct work_struct *data)
 	mutex_lock(&priv->mutex);
 	__iwl_up(priv);
 	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
 }
 
 static void iwl_bg_restart(struct work_struct *data)
@@ -1884,8 +2001,17 @@ static void iwl_bg_restart(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	iwl_down(priv);
-	queue_work(priv->workqueue, &priv->up);
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		mutex_lock(&priv->mutex);
+		priv->vif = NULL;
+		priv->is_open = 0;
+		mutex_unlock(&priv->mutex);
+		iwl_down(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		iwl_down(priv);
+		queue_work(priv->workqueue, &priv->up);
+	}
 }
 
 static void iwl_bg_rx_replenish(struct work_struct *data)
@@ -1903,7 +2029,7 @@ static void iwl_bg_rx_replenish(struct work_struct *data)
 
 #define IWL_DELAY_NEXT_SCAN (HZ*2)
 
-static void iwl_post_associate(struct iwl_priv *priv)
+void iwl_post_associate(struct iwl_priv *priv)
 {
 	struct ieee80211_conf *conf = NULL;
 	int ret = 0;
@@ -1925,13 +2051,12 @@ static void iwl_post_associate(struct iwl_priv *priv)
 	if (!priv->vif || !priv->is_open)
 		return;
 
-	iwl_power_cancel_timeout(priv);
 	iwl_scan_cancel_timeout(priv, 200);
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
 	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	iwl_setup_rxon_timing(priv);
 	ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
@@ -1944,7 +2069,9 @@ static void iwl_post_associate(struct iwl_priv *priv)
 
 	iwl_set_rxon_ht(priv, &priv->current_ht_config);
 
-	iwl_set_rxon_chain(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
 	priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
 
 	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
@@ -1966,7 +2093,7 @@ static void iwl_post_associate(struct iwl_priv *priv)
 
 	}
 
-	iwl_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	switch (priv->iw_mode) {
 	case NL80211_IFTYPE_STATION:
@@ -1999,7 +2126,7 @@ static void iwl_post_associate(struct iwl_priv *priv)
 	 * If chain noise has already been run, then we need to enable
 	 * power management here */
 	if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
-		iwl_power_enable_management(priv);
+		iwl_power_update_mode(priv, 0);
 
 	/* Enable Rx differential gain and sensitivity calibrations */
 	iwl_chain_noise_reset(priv);
@@ -2042,8 +2169,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	mutex_unlock(&priv->mutex);
 
-	iwl_rfkill_set_hw_state(priv);
-
 	if (ret)
 		return ret;
 
@@ -2052,9 +2177,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	IWL_DEBUG_INFO(priv, "Start UP work done.\n");
 
-	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
-		return 0;
-
 	/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
 	 * mac80211 will not be run successfully. */
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -2080,10 +2202,8 @@ static void iwl_mac_stop(struct ieee80211_hw *hw)
 
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
-	if (!priv->is_open) {
-		IWL_DEBUG_MAC80211(priv, "leave - skip\n");
+	if (!priv->is_open)
 		return;
-	}
 
 	priv->is_open = 0;
 
@@ -2123,175 +2243,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-static int iwl_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
-
-	if (priv->vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
-		return -EOPNOTSUPP;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->vif = conf->vif;
-	priv->iw_mode = conf->type;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
-		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
-	}
-
-	if (iwl_set_mode(priv, conf->type) == -EAGAIN)
-		/* we are not ready, will run again when ready */
-		set_bit(STATUS_MODE_PENDING, &priv->status);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
-/**
- * iwl_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags = 0;
-	int ret = 0;
-	u16 ch;
-	int scan_active = 0;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
-					conf->channel->hw_value, changed);
-
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-			test_bit(STATUS_SCANNING, &priv->status))) {
-		scan_active = 1;
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-	}
-
-
-	/* during scanning mac80211 will delay channel setting until
-	 * scan finish with changed = 0
-	 */
-	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
-		if (scan_active)
-			goto set_ch_out;
-
-		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
-		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-			!is_channel_ibss(ch_info)) {
-			IWL_ERR(priv, "channel %d in band %d not "
-				"IBSS channel\n",
-				conf->channel->hw_value, conf->channel->band);
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		priv->current_ht_config.is_ht = conf_is_ht(conf);
-
-		spin_lock_irqsave(&priv->lock, flags);
-
-
-		/* if we are switching from ht to 2.4 clear flags
-		 * from any ht related info since 2.4 does not
-		 * support ht */
-		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
-			priv->staging_rxon.flags = 0;
-
-		iwl_set_rxon_channel(priv, conf->channel);
-
-		iwl_set_flags_for_band(priv, conf->channel->band);
-		spin_unlock_irqrestore(&priv->lock, flags);
- set_ch_out:
-		/* The list of supported rates and rate mask can be different
-		 * for each band; since the band may have changed, reset
-		 * the rate mask to what mac80211 lists */
-		iwl_set_rate(priv);
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		if (conf->flags & IEEE80211_CONF_PS)
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
-		else
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
-		if (ret)
-			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			priv->tx_power_user_lmt, conf->power_level);
-
-		iwl_set_tx_power(priv, conf->power_level, false);
-	}
-
-	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
-	iwl_set_rxon_chain(priv);
-
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		if (conf->radio_enabled &&
-			iwl_radio_kill_sw_enable_radio(priv)) {
-			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
-						"waiting for uCode\n");
-			goto out;
-		}
-
-		if (!conf->radio_enabled)
-			iwl_radio_kill_sw_disable_radio(priv);
-	}
-
-	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-		goto out;
-	}
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		goto out;
-	}
-
-	if (scan_active)
-		goto out;
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwl_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
-
-
-out:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-static void iwl_config_ap(struct iwl_priv *priv)
+void iwl_config_ap(struct iwl_priv *priv)
 {
 	int ret = 0;
 	unsigned long flags;
@@ -2304,7 +2256,7 @@ static void iwl_config_ap(struct iwl_priv *priv)
 
 		/* RXON - unassoc (to set timing command) */
 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
+		iwlcore_commit_rxon(priv);
 
 		/* RXON Timing */
 		iwl_setup_rxon_timing(priv);
@@ -2314,7 +2266,8 @@ static void iwl_config_ap(struct iwl_priv *priv)
 			IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
 					"Attempting to continue.\n");
 
-		iwl_set_rxon_chain(priv);
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
 		/* FIXME: what should be the assoc_id for AP? */
 		priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
@@ -2340,7 +2293,7 @@ static void iwl_config_ap(struct iwl_priv *priv)
 		}
 		/* restore RXON assoc */
 		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
+		iwlcore_commit_rxon(priv);
 		spin_lock_irqsave(&priv->lock, flags);
 		iwl_activate_qos(priv, 1);
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -2353,194 +2306,6 @@ static void iwl_config_ap(struct iwl_priv *priv)
 	 * clear sta table, add BCAST sta... */
 }
 
-
-static int iwl_mac_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	int rc;
-
-	if (conf == NULL)
-		return -EIO;
-
-	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
-		return 0;
-	}
-
-	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-	    conf->changed & IEEE80211_IFCC_BEACON) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon)
-			return -ENOMEM;
-		mutex_lock(&priv->mutex);
-		rc = iwl_mac_beacon_update(hw, beacon);
-		mutex_unlock(&priv->mutex);
-		if (rc)
-			return rc;
-	}
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->bssid)
-		IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
-
-/*
- * very dubious code was here; the probe filtering flag is never set:
- *
-	if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
-	    !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
- */
-
-	if (priv->iw_mode == NL80211_IFTYPE_AP) {
-		if (!conf->bssid) {
-			conf->bssid = priv->mac_addr;
-			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
-					   conf->bssid);
-		}
-		if (priv->ibss_beacon)
-			dev_kfree_skb(priv->ibss_beacon);
-
-		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (iwl_is_rfkill(priv))
-		goto done;
-
-	if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
-	    !is_multicast_ether_addr(conf->bssid)) {
-		/* If there is currently a HW scan going on in the background
-		 * then we need to cancel it else the RXON below will fail. */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress "
-				    "after 100ms\n");
-			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
-			mutex_unlock(&priv->mutex);
-			return -EAGAIN;
-		}
-		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
-
-		/* TODO: Audit driver for usage of these members and see
-		 * if mac80211 deprecates them (priv->bssid looks like it
-		 * shouldn't be there, but I haven't scanned the IBSS code
-		 * to verify) - jpk */
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-
-		if (priv->iw_mode == NL80211_IFTYPE_AP)
-			iwl_config_ap(priv);
-		else {
-			rc = iwl_commit_rxon(priv);
-			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
-				iwl_rxon_add_station(
-					priv, priv->active_rxon.bssid_addr, 1);
-		}
-
-	} else {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
-	}
-
- done:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-static void iwl_mac_remove_interface(struct ieee80211_hw *hw,
-				     struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	mutex_lock(&priv->mutex);
-
-	if (iwl_is_ready_rf(priv)) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
-	}
-	if (priv->vif == conf->vif) {
-		priv->vif = NULL;
-		memset(priv->bssid, 0, ETH_ALEN);
-	}
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-static void iwl_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-	}
-
-	if (changes & BSS_CHANGED_HT) {
-		iwl_ht_conf(priv, bss_conf);
-		iwl_set_rxon_chain(priv);
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		/* This should never happen as this function should
-		 * never be called from interrupt context. */
-		if (WARN_ON_ONCE(in_interrupt()))
-			return;
-		if (bss_conf->assoc) {
-			priv->assoc_id = bss_conf->aid;
-			priv->beacon_int = bss_conf->beacon_int;
-			priv->power_data.dtim_period = bss_conf->dtim_period;
-			priv->timestamp = bss_conf->timestamp;
-			priv->assoc_capability = bss_conf->assoc_capability;
-
-			/* we have just associated, don't start scan too early
-			 * leave time for EAPOL exchange to complete
-			 */
-			priv->next_scan_jiffies = jiffies +
-					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-			mutex_lock(&priv->mutex);
-			iwl_post_associate(priv);
-			mutex_unlock(&priv->mutex);
-		} else {
-			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
-		}
-	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
-			iwl_send_rxon_assoc(priv);
-	}
-
-}
-
 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
 			struct ieee80211_key_conf *keyconf, const u8 *addr,
 			u32 iv32, u16 *phase1key)
@@ -2623,49 +2388,6 @@ static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-static int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	int q;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
-		return 0;
-	}
-
-	q = AC_NUM - 1 - queue;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
-	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
-	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
-	priv->qos_data.def_qos_parm.ac[q].edca_txop =
-			cpu_to_le16((params->txop * 32));
-
-	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
-	priv->qos_data.qos_active = 1;
-
-	if (priv->iw_mode == NL80211_IFTYPE_AP)
-		iwl_activate_qos(priv, 1);
-	else if (priv->assoc_id && iwl_is_associated(priv))
-		iwl_activate_qos(priv, 0);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			     enum ieee80211_ampdu_mlme_action action,
 			     struct ieee80211_sta *sta, u16 tid, u16 *ssn)
@@ -2708,41 +2430,6 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-	int i, avail;
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < AC_NUM; i++) {
-		txq = &priv->txq[i];
-		q = &txq->q;
-		avail = iwl_queue_space(q);
-
-		stats[i].len = q->n_window - avail;
-		stats[i].limit = q->n_window - q->high_mark;
-		stats[i].count = q->n_window;
-
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-	return 0;
-}
-
 static int iwl_mac_get_stats(struct ieee80211_hw *hw,
 			     struct ieee80211_low_level_stats *stats)
 {
@@ -2755,120 +2442,6 @@ static int iwl_mac_get_stats(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = 0;
-	priv->assoc_capability = 0;
-	priv->assoc_station_added = 0;
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = NULL;
-
-	priv->beacon_int = priv->hw->conf.beacon_int;
-	priv->timestamp = 0;
-	if ((priv->iw_mode == NL80211_IFTYPE_STATION))
-		priv->beacon_int = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	 */
-	if (priv->iw_mode != NL80211_IFTYPE_AP) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
-	}
-
-	iwl_power_update_mode(priv, 0);
-
-	/* Per mac80211.h: This is only used in IBSS mode... */
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-
-		/* switch to CAM during association period.
-		 * the ucode will block any association/authentication
-		 * frome during assiciation period if it can not hear
-		 * the AP because of PM. the timer enable PM back is
-		 * association do not complete
-		 */
-		if (priv->hw->conf.channel->flags & (IEEE80211_CHAN_PASSIVE_SCAN |
-						     IEEE80211_CHAN_RADAR))
-				iwl_power_disable_management(priv, 3000);
-
-		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	iwl_set_rate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = skb;
-
-	priv->assoc_id = 0;
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	iwl_post_associate(priv);
-
-
-	return 0;
-}
-
 /*****************************************************************************
  *
  * sysfs attributes
@@ -2888,7 +2461,7 @@ static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 static ssize_t show_debug_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%08X\n", priv->debug_level);
 }
@@ -2896,7 +2469,7 @@ static ssize_t store_debug_level(struct device *d,
 				struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	int ret;
 
@@ -2919,7 +2492,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
 static ssize_t show_version(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	struct iwl_alive_resp *palive = &priv->card_alive;
 	ssize_t pos = 0;
 	u16 eeprom_ver;
@@ -2936,8 +2509,10 @@ static ssize_t show_version(struct device *d,
 
 	if (priv->eeprom) {
 		eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
-		pos += sprintf(buf + pos, "EEPROM version: 0x%x\n",
-				 eeprom_ver);
+		pos += sprintf(buf + pos, "NVM Type: %s, version: 0x%x\n",
+			       (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+			       ? "OTP" : "EEPROM", eeprom_ver);
+
 	} else {
 		pos += sprintf(buf + pos, "EEPROM not initialzed\n");
 	}
@@ -2950,7 +2525,7 @@ static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL);
 static ssize_t show_temperature(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -2963,7 +2538,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
 static ssize_t show_tx_power(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (!iwl_is_ready_rf(priv))
 		return sprintf(buf, "off\n");
@@ -2975,7 +2550,7 @@ static ssize_t store_tx_power(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	int ret;
 
@@ -2993,7 +2568,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
 static ssize_t show_flags(struct device *d,
 			  struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
 }
@@ -3002,7 +2577,7 @@ static ssize_t store_flags(struct device *d,
 			   struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	u32 flags;
 	int ret = strict_strtoul(buf, 0, &val);
@@ -3018,7 +2593,7 @@ static ssize_t store_flags(struct device *d,
 		else {
 			IWL_DEBUG_INFO(priv, "Commit rxon.flags = 0x%04X\n", flags);
 			priv->staging_rxon.flags = cpu_to_le32(flags);
-			iwl_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -3031,7 +2606,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
 static ssize_t show_filter_flags(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n",
 		le32_to_cpu(priv->active_rxon.filter_flags));
@@ -3041,7 +2616,7 @@ static ssize_t store_filter_flags(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	u32 filter_flags;
 	int ret = strict_strtoul(buf, 0, &val);
@@ -3059,7 +2634,7 @@ static ssize_t store_filter_flags(struct device *d,
 				       "0x%04X\n", filter_flags);
 			priv->staging_rxon.filter_flags =
 				cpu_to_le32(filter_flags);
-			iwl_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -3102,32 +2677,37 @@ static ssize_t show_power_level(struct device *d,
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "INDEX:%d\t", level);
+	p += sprintf(p, "USER:%d\n", mode);
 	return p - buf + 1;
 }
 
 static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
 		   store_power_level);
 
+static ssize_t show_qos(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	char *p = buf;
+	int   q;
+
+	for (q = 0; q < AC_NUM; q++) {
+		p += sprintf(p, "\tcw_min\tcw_max\taifsn\ttxop\n");
+		p += sprintf(p, "AC[%d]\t%u\t%u\t%u\t%u\n", q,
+			     priv->qos_data.def_qos_parm.ac[q].cw_min,
+			     priv->qos_data.def_qos_parm.ac[q].cw_max,
+			     priv->qos_data.def_qos_parm.ac[q].aifsn,
+			     priv->qos_data.def_qos_parm.ac[q].edca_txop);
+	}
+
+	return p - buf + 1;
+}
+
+static DEVICE_ATTR(qos, S_IRUGO, show_qos, NULL);
 
 static ssize_t show_statistics(struct device *d,
 			       struct device_attribute *attr, char *buf)
@@ -3183,14 +2763,12 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	INIT_WORK(&priv->up, iwl_bg_up);
 	INIT_WORK(&priv->restart, iwl_bg_restart);
 	INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
-	INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill);
 	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
 	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
 	INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
 	INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
 
 	iwl_setup_scan_deferred_work(priv);
-	iwl_setup_power_deferred_work(priv);
 
 	if (priv->cfg->ops->lib->setup_deferred_work)
 		priv->cfg->ops->lib->setup_deferred_work(priv);
@@ -3199,8 +2777,12 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	priv->statistics_periodic.data = (unsigned long)priv;
 	priv->statistics_periodic.function = iwl_bg_statistics_periodic;
 
-	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
-		     iwl_irq_tasklet, (unsigned long)priv);
+	if (!priv->cfg->use_isr_legacy)
+		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+			iwl_irq_tasklet, (unsigned long)priv);
+	else
+		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+			iwl_irq_tasklet_legacy, (unsigned long)priv);
 }
 
 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
@@ -3210,7 +2792,6 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
 
 	cancel_delayed_work_sync(&priv->init_alive_start);
 	cancel_delayed_work(&priv->scan_check);
-	cancel_delayed_work_sync(&priv->set_power_save);
 	cancel_delayed_work(&priv->alive_start);
 	cancel_work_sync(&priv->beacon_update);
 	del_timer_sync(&priv->statistics_periodic);
@@ -3227,7 +2808,7 @@ static struct attribute *iwl_sysfs_entries[] = {
 	&dev_attr_debug_level.attr,
 #endif
 	&dev_attr_version.attr,
-
+	&dev_attr_qos.attr,
 	NULL
 };
 
@@ -3243,7 +2824,6 @@ static struct ieee80211_ops iwl_hw_ops = {
 	.add_interface = iwl_mac_add_interface,
 	.remove_interface = iwl_mac_remove_interface,
 	.config = iwl_mac_config,
-	.config_interface = iwl_mac_config_interface,
 	.configure_filter = iwl_configure_filter,
 	.set_key = iwl_mac_set_key,
 	.update_tkip_key = iwl_mac_update_tkip_key,
@@ -3291,6 +2871,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 	priv->cfg = cfg;
 	priv->pci_dev = pdev;
+	priv->inta_mask = CSR_INI_SET_MASK;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	priv->debug_level = priv->cfg->mod_params->debug;
@@ -3341,6 +2922,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		(unsigned long long) pci_resource_len(pdev, 0));
 	IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
 
+	/* this spin lock will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->reg_lock);
 	iwl_hw_detect(priv);
 	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n",
 		priv->cfg->name, priv->hw_rev);
@@ -3349,6 +2934,12 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
+	iwl_prepare_card_hw(priv);
+	if (!priv->hw_ready) {
+		IWL_WARN(priv, "Failed, HW not ready\n");
+		goto out_iounmap;
+	}
+
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {
@@ -3390,18 +2981,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_free_eeprom;
 	/* At this point both hw and priv are initialized. */
 
-	/**********************************
-	 * 7. Initialize module parameters
-	 **********************************/
-
-	/* Disable radio (SW RF KILL) via parameter when loading driver */
-	if (priv->cfg->mod_params->disable) {
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO(priv, "Radio disabled.\n");
-	}
-
 	/********************
-	 * 8. Setup services
+	 * 7. Setup services
 	 ********************/
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_disable_interrupts(priv);
@@ -3409,8 +2990,9 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_enable_msi(priv->pci_dev);
 
-	err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
-			  DRV_NAME, priv);
+	iwl_alloc_isr_ict(priv);
+	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+			  IRQF_SHARED, DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
 		goto out_disable_msi;
@@ -3425,7 +3007,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	iwl_setup_rx_handlers(priv);
 
 	/**********************************
-	 * 9. Setup and register mac80211
+	 * 8. Setup and register mac80211
 	 **********************************/
 
 	/* enable interrupts if needed: hw bug w/a */
@@ -3443,7 +3025,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	err = iwl_dbgfs_register(priv, DRV_NAME);
 	if (err)
-		IWL_ERR(priv, "failed to create debugfs files\n");
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
@@ -3451,12 +3033,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	else
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	err = iwl_rfkill_init(priv);
-	if (err)
-		IWL_ERR(priv, "Unable to initialize RFKILL system. "
-				  "Ignoring error: %d\n", err);
-	else
-		iwl_rfkill_set_hw_state(priv);
+	wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+		test_bit(STATUS_RF_KILL_HW, &priv->status));
 
 	iwl_power_initialize(priv);
 	return 0;
@@ -3467,6 +3045,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
  out_free_irq:
 	free_irq(priv->pci_dev->irq, priv);
+	iwl_free_isr_ict(priv);
  out_disable_msi:
 	pci_disable_msi(priv->pci_dev);
 	iwl_uninit_drv(priv);
@@ -3519,7 +3098,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 
 	iwl_synchronize_irq(priv);
 
-	iwl_rfkill_unregister(priv);
 	iwl_dealloc_ucode_pci(priv);
 
 	if (priv->rxq.bd)
@@ -3548,51 +3126,14 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 
 	iwl_uninit_drv(priv);
 
+	iwl_free_isr_ict(priv);
+
 	if (priv->ibss_beacon)
 		dev_kfree_skb(priv->ibss_beacon);
 
 	ieee80211_free_hw(priv->hw);
 }
 
-#ifdef CONFIG_PM
-
-static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-
-	if (priv->is_open) {
-		set_bit(STATUS_IN_SUSPEND, &priv->status);
-		iwl_mac_stop(priv->hw);
-		priv->is_open = 1;
-	}
-
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-static int iwl_pci_resume(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	int ret;
-
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-	pci_restore_state(pdev);
-	iwl_enable_interrupts(priv);
-
-	if (priv->is_open)
-		iwl_mac_start(priv->hw);
-
-	clear_bit(STATUS_IN_SUSPEND, &priv->status);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
 
 /*****************************************************************************
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index 735f3f19928..a5d63672ad3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -857,7 +857,7 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
 		priv->cfg->ops->lib->update_chain_flags(priv);
 
 	data->state = IWL_CHAIN_NOISE_DONE;
-	iwl_power_enable_management(priv);
+	iwl_power_update_mode(priv, 0);
 }
 EXPORT_SYMBOL(iwl_chain_noise_calibration);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 29d40746da6..c87033bf3ad 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -614,8 +614,18 @@ enum {
 
 #define RXON_FLG_CHANNEL_MODE_POS		(25)
 #define RXON_FLG_CHANNEL_MODE_MSK		cpu_to_le32(0x3 << 25)
-#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK	cpu_to_le32(0x1 << 25)
-#define RXON_FLG_CHANNEL_MODE_MIXED_MSK		cpu_to_le32(0x2 << 25)
+
+/* channel mode */
+enum {
+	CHANNEL_MODE_LEGACY = 0,
+	CHANNEL_MODE_PURE_40 = 1,
+	CHANNEL_MODE_MIXED = 2,
+	CHANNEL_MODE_RESERVED = 3,
+};
+#define RXON_FLG_CHANNEL_MODE_LEGACY	cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_PURE_40	cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_MIXED	cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
+
 /* CTS to self (if spec allows) flag */
 #define RXON_FLG_SELF_CTS_EN			cpu_to_le32(0x1<<30)
 
@@ -1057,7 +1067,7 @@ struct iwl_addsta_cmd {
 	 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
 	__le16 tid_disable_tx;
 
-	__le16	reserved1;
+	__le16	rate_n_flags;		/* 3945 only */
 
 	/* TID for which to add block-ack support.
 	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
@@ -1903,6 +1913,18 @@ struct iwl_link_qual_general_params {
 	u8 start_rate_index[LINK_QUAL_AC_NUM];
 } __attribute__ ((packed));
 
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000) /* 4 milliseconds */
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX	(65535)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN	(0)
+
+#define LINK_QUAL_AGG_DISABLE_START_DEF	(3)
+#define LINK_QUAL_AGG_DISABLE_START_MAX	(255)
+#define LINK_QUAL_AGG_DISABLE_START_MIN	(0)
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF	(31)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX	(64)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN	(0)
+
 /**
  * struct iwl_link_qual_agg_params
  *
@@ -2469,11 +2491,12 @@ struct iwl_ssid_ie {
 	u8 ssid[32];
 } __attribute__ ((packed));
 
-#define PROBE_OPTION_MAX_API1		0x4
-#define PROBE_OPTION_MAX        	0x14
+#define PROBE_OPTION_MAX_3945		4
+#define PROBE_OPTION_MAX		20
 #define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
 #define IWL_GOOD_CRC_TH			cpu_to_le16(1)
 #define IWL_MAX_SCAN_SIZE 1024
+#define IWL_MAX_PROBE_REQUEST		200
 
 /*
  * REPLY_SCAN_CMD = 0x80 (command)
@@ -2552,7 +2575,7 @@ struct iwl3945_scan_cmd {
 	struct iwl3945_tx_cmd tx_cmd;
 
 	/* For directed active scans (set to all-0s otherwise) */
-	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_API1];
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
 
 	/*
 	 * Probe request frame, followed by channel list.
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index c54fb93e9d7..f9d16ca5b3d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -36,9 +36,9 @@
 #include "iwl-debug.h"
 #include "iwl-core.h"
 #include "iwl-io.h"
-#include "iwl-rfkill.h"
 #include "iwl-power.h"
 #include "iwl-sta.h"
+#include "iwl-helpers.h"
 
 
 MODULE_DESCRIPTION("iwl core");
@@ -59,6 +59,8 @@ MODULE_LICENSE("GPL");
 				    IWL_RATE_##pp##M_INDEX,    \
 				    IWL_RATE_##np##M_INDEX }
 
+static irqreturn_t iwl_isr(int irq, void *data);
+
 /*
  * Parameter order:
  *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
@@ -273,6 +275,14 @@ void iwl_activate_qos(struct iwl_priv *priv, u8 force)
 }
 EXPORT_SYMBOL(iwl_activate_qos);
 
+/*
+ * AC        CWmin         CW max      AIFSN      TXOP Limit    TXOP Limit
+ *                                              (802.11b)      (802.11a/g)
+ * AC_BK      15            1023        7           0               0
+ * AC_BE      15            1023        3           0               0
+ * AC_VI       7              15        2          6.016ms       3.008ms
+ * AC_VO       3               7        2          3.264ms       1.504ms
+ */
 void iwl_reset_qos(struct iwl_priv *priv)
 {
 	u16 cw_min = 15;
@@ -304,6 +314,7 @@ void iwl_reset_qos(struct iwl_priv *priv)
 	if (priv->qos_data.qos_active)
 		aifs = 3;
 
+	/* AC_BE */
 	priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
 	priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
 	priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
@@ -311,6 +322,7 @@ void iwl_reset_qos(struct iwl_priv *priv)
 	priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
 
 	if (priv->qos_data.qos_active) {
+		/* AC_BK */
 		i = 1;
 		priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
 		priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
@@ -318,11 +330,12 @@ void iwl_reset_qos(struct iwl_priv *priv)
 		priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 
+		/* AC_VI */
 		i = 2;
 		priv->qos_data.def_qos_parm.ac[i].cw_min =
 			cpu_to_le16((cw_min + 1) / 2 - 1);
 		priv->qos_data.def_qos_parm.ac[i].cw_max =
-			cpu_to_le16(cw_max);
+			cpu_to_le16(cw_min);
 		priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
 		if (is_legacy)
 			priv->qos_data.def_qos_parm.ac[i].edca_txop =
@@ -332,11 +345,12 @@ void iwl_reset_qos(struct iwl_priv *priv)
 				cpu_to_le16(3008);
 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 
+		/* AC_VO */
 		i = 3;
 		priv->qos_data.def_qos_parm.ac[i].cw_min =
 			cpu_to_le16((cw_min + 1) / 4 - 1);
 		priv->qos_data.def_qos_parm.ac[i].cw_max =
-			cpu_to_le16((cw_max + 1) / 2 - 1);
+			cpu_to_le16((cw_min + 1) / 2 - 1);
 		priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 		if (is_legacy)
@@ -591,10 +605,10 @@ static u8 iwl_is_channel_extension(struct iwl_priv *priv,
 
 	if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
 		return !(ch_info->fat_extension_channel &
-					IEEE80211_CHAN_NO_FAT_ABOVE);
+					IEEE80211_CHAN_NO_HT40PLUS);
 	else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
 		return !(ch_info->fat_extension_channel &
-					IEEE80211_CHAN_NO_FAT_BELOW);
+					IEEE80211_CHAN_NO_HT40MINUS);
 
 	return 0;
 }
@@ -605,19 +619,23 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 	struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
 
 	if ((!iwl_ht_conf->is_ht) ||
-	   (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
-	   (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
+	    (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ))
 		return 0;
 
+	/* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
+	 * the bit will not set if it is pure 40MHz case
+	 */
 	if (sta_ht_inf) {
-		if ((!sta_ht_inf->ht_supported) ||
-		   (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
+		if (!sta_ht_inf->ht_supported)
 			return 0;
 	}
 
-	return iwl_is_channel_extension(priv, priv->band,
-					le16_to_cpu(priv->staging_rxon.channel),
-					iwl_ht_conf->extension_chan_offset);
+	if (iwl_ht_conf->ht_protection & IEEE80211_HT_OP_MODE_PROTECTION_20MHZ)
+		return 1;
+	else
+		return iwl_is_channel_extension(priv, priv->band,
+				le16_to_cpu(priv->staging_rxon.channel),
+				iwl_ht_conf->extension_chan_offset);
 }
 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
 
@@ -735,6 +753,8 @@ int iwl_full_rxon_required(struct iwl_priv *priv)
 	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
 	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
 	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
+	    (priv->staging_rxon.ofdm_ht_triple_stream_basic_rates !=
+	     priv->active_rxon.ofdm_ht_triple_stream_basic_rates) ||
 	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
 		return 1;
 
@@ -785,43 +805,53 @@ EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 {
 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-	u32 val;
 
 	if (!ht_info->is_ht) {
-		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-			RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
+		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
 			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
 			RXON_FLG_FAT_PROT_MSK |
 			RXON_FLG_HT_PROT_MSK);
 		return;
 	}
 
-	/* Set up channel bandwidth:  20 MHz only, or 20/40 mixed if fat ok */
-	if (iwl_is_fat_tx_allowed(priv, NULL))
-		rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
-	else
-		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-				 RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
-
-	/* Note: control channel is opposite of extension channel */
-	switch (ht_info->extension_chan_offset) {
-	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-		rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
-		break;
-	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-		rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
-		break;
-	case IEEE80211_HT_PARAM_CHA_SEC_NONE:
-	default:
-		rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
-		break;
+	/* FIXME: if the definition of ht_protection changed, the "translation"
+	 * will be needed for rxon->flags
+	 */
+	rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
+
+	/* Set up channel bandwidth:
+	 * 20 MHz only, 20/40 mixed or pure 40 if fat ok */
+	/* clear the HT channel mode before set the mode */
+	rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+	if (iwl_is_fat_tx_allowed(priv, NULL)) {
+		/* pure 40 fat */
+		if (rxon->flags & RXON_FLG_FAT_PROT_MSK)
+			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
+		else {
+			/* Note: control channel is opposite of extension channel */
+			switch (ht_info->extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+			default:
+				/* channel location only valid if in Mixed mode */
+				IWL_ERR(priv, "invalid extension channel offset\n");
+				break;
+			}
+		}
+	} else {
+		rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
 	}
 
-	val = ht_info->ht_protection;
-
-	rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
-
-	iwl_set_rxon_chain(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
 	IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X "
 			"rxon flags 0x%X operation mode :0x%X "
@@ -901,10 +931,11 @@ static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
  * never called for monitor mode. The only way mac80211 informs us about
  * monitor mode is through configuring filters (call to configure_filter).
  */
-static bool iwl_is_monitor_mode(struct iwl_priv *priv)
+bool iwl_is_monitor_mode(struct iwl_priv *priv)
 {
 	return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
 }
+EXPORT_SYMBOL(iwl_is_monitor_mode);
 
 /**
  * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
@@ -956,10 +987,10 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
 	if (iwl_is_monitor_mode(priv) &&
 	    !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
 	    ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
-		rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS;
-		rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS;
-		rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
-		rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+		rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+		rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS;
+		rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+		rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
 	}
 
 	priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
@@ -1068,11 +1099,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
 						  RXON_FILTER_ACCEPT_GRP_MSK;
 		break;
 
-	case NL80211_IFTYPE_MONITOR:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
-		priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
-		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
 	default:
 		IWL_ERR(priv, "Unsupported interface type %d\n", mode);
 		break;
@@ -1111,16 +1137,18 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
 	priv->staging_rxon.cck_basic_rates =
 	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
 
-	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-					RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
+	/* clear both MIX and PURE40 mode flag */
+	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
+					RXON_FLG_CHANNEL_MODE_PURE_40);
 	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
 	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
 	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
 	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
+	priv->staging_rxon.ofdm_ht_triple_stream_basic_rates = 0xff;
 }
 EXPORT_SYMBOL(iwl_connection_init_rx_config);
 
-void iwl_set_rate(struct iwl_priv *priv)
+static void iwl_set_rate(struct iwl_priv *priv)
 {
 	const struct ieee80211_supported_band *hw = NULL;
 	struct ieee80211_rate *rate;
@@ -1166,7 +1194,6 @@ void iwl_set_rate(struct iwl_priv *priv)
 		priv->staging_rxon.ofdm_basic_rates =
 		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
 }
-EXPORT_SYMBOL(iwl_set_rate);
 
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
@@ -1230,11 +1257,6 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 		IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
 			  "Restarting adapter due to uCode error.\n");
 
-		if (iwl_is_associated(priv)) {
-			memcpy(&priv->recovery_rxon, &priv->active_rxon,
-			       sizeof(priv->recovery_rxon));
-			priv->error_recovering = 1;
-		}
 		if (priv->cfg->mod_params->restart_fw)
 			queue_work(priv->workqueue, &priv->restart);
 	}
@@ -1298,19 +1320,20 @@ int iwl_setup_mac(struct iwl_priv *priv)
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM |
 		    IEEE80211_HW_AMPDU_AGGREGATION |
-		    IEEE80211_HW_SPECTRUM_MGMT |
-		    IEEE80211_HW_SUPPORTS_PS;
+		    IEEE80211_HW_SPECTRUM_MGMT;
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC);
 
 	hw->wiphy->custom_regulatory = true;
-	hw->wiphy->max_scan_ssids = 1;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 
-	hw->conf.beacon_int = 100;
 	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
 
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
@@ -1357,7 +1380,6 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->ibss_beacon = NULL;
 
 	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->power_data.lock);
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
@@ -1378,7 +1400,9 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
 
 	/* Choose which receivers/antennas to use */
-	iwl_set_rxon_chain(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
 	iwl_init_scan_params(priv);
 
 	iwl_reset_qos(priv);
@@ -1475,11 +1499,273 @@ void iwl_enable_interrupts(struct iwl_priv *priv)
 {
 	IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
 	set_bit(STATUS_INT_ENABLED, &priv->status);
-	iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
+	iwl_write32(priv, CSR_INT_MASK, priv->inta_mask);
 }
 EXPORT_SYMBOL(iwl_enable_interrupts);
 
-irqreturn_t iwl_isr(int irq, void *data)
+
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
+
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_priv *priv)
+{
+	if (priv->ict_tbl_vir) {
+		pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) +
+					PAGE_SIZE, priv->ict_tbl_vir,
+					priv->ict_tbl_dma);
+		priv->ict_tbl_vir = NULL;
+	}
+}
+EXPORT_SYMBOL(iwl_free_isr_ict);
+
+
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_priv *priv)
+{
+
+	if (priv->cfg->use_isr_legacy)
+		return 0;
+	/* allocate shrared data table */
+	priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) *
+						  ICT_COUNT) + PAGE_SIZE,
+						  &priv->ict_tbl_dma);
+	if (!priv->ict_tbl_vir)
+		return -ENOMEM;
+
+	/* align table to PAGE_SIZE boundry */
+	priv->aligned_ict_tbl_dma = ALIGN(priv->ict_tbl_dma, PAGE_SIZE);
+
+	IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+			     (unsigned long long)priv->ict_tbl_dma,
+			     (unsigned long long)priv->aligned_ict_tbl_dma,
+			(int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+	priv->ict_tbl =  priv->ict_tbl_vir +
+			  (priv->aligned_ict_tbl_dma - priv->ict_tbl_dma);
+
+	IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n",
+			     priv->ict_tbl, priv->ict_tbl_vir,
+			(int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+	/* reset table and index to all 0 */
+	memset(priv->ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+	priv->ict_index = 0;
+
+	/* add periodic RX interrupt */
+	priv->inta_mask |= CSR_INT_BIT_RX_PERIODIC;
+	return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_isr_ict);
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_priv *priv)
+{
+	u32 val;
+	unsigned long flags;
+
+	if (!priv->ict_tbl_vir)
+		return 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_disable_interrupts(priv);
+
+	memset(&priv->ict_tbl[0],0, sizeof(u32) * ICT_COUNT);
+
+	val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+	val |= CSR_DRAM_INT_TBL_ENABLE;
+	val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+	IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X "
+			"aligned dma address %Lx\n",
+			val, (unsigned long long)priv->aligned_ict_tbl_dma);
+
+	iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val);
+	priv->use_ict = true;
+	priv->ict_index = 0;
+	iwl_write32(priv, CSR_INT, priv->inta_mask);
+	iwl_enable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_reset_ict);
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->use_ict = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(iwl_disable_ict);
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	u32 val = 0;
+
+	if (!priv)
+		return IRQ_NONE;
+
+	/* dram interrupt table not set yet,
+	 * use legacy interrupt.
+	 */
+	if (!priv->use_ict)
+		return iwl_isr(irq, data);
+
+	spin_lock(&priv->lock);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 * back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here.
+	 */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!priv->ict_tbl[priv->ict_index]) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	/* read all entries that not 0 start with ict_index */
+	while (priv->ict_tbl[priv->ict_index]) {
+
+		val |= priv->ict_tbl[priv->ict_index];
+		IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n",
+					priv->ict_index,
+					priv->ict_tbl[priv->ict_index]);
+		priv->ict_tbl[priv->ict_index] = 0;
+		priv->ict_index = iwl_queue_inc_wrap(priv->ict_index,
+								ICT_COUNT);
+
+	}
+
+	/* We should not get this value, just ignore it. */
+	if (val == 0xffffffff)
+		val = 0;
+
+	inta = (0xff & val) | ((0xff00 & val) << 16);
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+			inta, inta_mask, val);
+
+	inta &= priv->inta_mask;
+	priv->inta |= inta;
+
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&priv->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) {
+		/* Allow interrupt if was disabled by this handler and
+		 * no tasklet was schedules, We should not enable interrupt,
+		 * tasklet will enable it.
+		 */
+		iwl_enable_interrupts(priv);
+	}
+
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service.
+	 * only Re-enable if disabled by irq.
+	 */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+		iwl_enable_interrupts(priv);
+
+	spin_unlock(&priv->lock);
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr_ict);
+
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_fh;
+#endif
+	if (!priv)
+		return IRQ_NONE;
+
+	spin_lock(&priv->lock);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(priv, CSR_INT);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & (IWL_DL_ISR)) {
+		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+		IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
+			      "fh 0x%08x\n", inta, inta_mask, inta_fh);
+	}
+#endif
+
+	priv->inta |= inta;
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&priv->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+		iwl_enable_interrupts(priv);
+
+ unplugged:
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if diabled by irq  and no schedules tasklet. */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+		iwl_enable_interrupts(priv);
+
+	spin_unlock(&priv->lock);
+	return IRQ_NONE;
+}
+
+irqreturn_t iwl_isr_legacy(int irq, void *data)
 {
 	struct iwl_priv *priv = data;
 	u32 inta, inta_mask;
@@ -1536,7 +1822,7 @@ irqreturn_t iwl_isr(int irq, void *data)
 	spin_unlock(&priv->lock);
 	return IRQ_NONE;
 }
-EXPORT_SYMBOL(iwl_isr);
+EXPORT_SYMBOL(iwl_isr_legacy);
 
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
@@ -1580,10 +1866,6 @@ static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
 		/* read data comes through single port, auto-incr addr */
 		/* NOTE: Use the debugless read so we don't flood kernel log
@@ -1599,8 +1881,6 @@ static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 		}
 	}
 
-	iwl_release_nic_access(priv);
-
 	return ret;
 }
 
@@ -1618,10 +1898,6 @@ static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
 			   IWL49_RTC_INST_LOWER_BOUND);
 
@@ -1642,8 +1918,6 @@ static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
 		}
 	}
 
-	iwl_release_nic_access(priv);
-
 	if (!errcnt)
 		IWL_DEBUG_INFO(priv,
 		    "ucode image in INSTRUCTION memory is good\n");
@@ -1752,7 +2026,6 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
 	u32 data2, line;
 	u32 desc, time, count, base, data1;
 	u32 blink1, blink2, ilink1, ilink2;
-	int ret;
 
 	if (priv->ucode_type == UCODE_INIT)
 		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
@@ -1764,12 +2037,6 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
 		return;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	count = iwl_read_targ_mem(priv, base);
 
 	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
@@ -1796,7 +2063,6 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
 	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
 		ilink1, ilink2);
 
-	iwl_release_nic_access(priv);
 }
 EXPORT_SYMBOL(iwl_dump_nic_error_log);
 
@@ -1805,7 +2071,6 @@ EXPORT_SYMBOL(iwl_dump_nic_error_log);
 /**
  * iwl_print_event_log - Dump error event log to syslog
  *
- * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  */
 static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
 				u32 num_events, u32 mode)
@@ -1851,7 +2116,6 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
 
 void iwl_dump_nic_event_log(struct iwl_priv *priv)
 {
-	int ret;
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
 	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
@@ -1869,12 +2133,6 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv)
 		return;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	/* event log header */
 	capacity = iwl_read_targ_mem(priv, base);
 	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
@@ -1886,7 +2144,6 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv)
 	/* bail out if nothing in log */
 	if (size == 0) {
 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		iwl_release_nic_access(priv);
 		return;
 	}
 
@@ -1901,7 +2158,6 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv)
 	/* (then/else) start at top of log */
 	iwl_print_event_log(priv, 0, next_entry, mode);
 
-	iwl_release_nic_access(priv);
 }
 EXPORT_SYMBOL(iwl_dump_nic_event_log);
 
@@ -1954,161 +2210,680 @@ int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
 }
 EXPORT_SYMBOL(iwl_send_card_state);
 
-void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
+void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
+			   struct iwl_rx_mem_buffer *rxb)
 {
-	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
+	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
+		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
+#endif
+}
+EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
 
-	if (test_bit(STATUS_RF_KILL_SW, &priv->status))
-		return;
+void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
+				      struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
+			"notification for %s:\n",
+			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+}
+EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
 
-	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO OFF\n");
+void iwl_rx_reply_error(struct iwl_priv *priv,
+			struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
-	iwl_scan_cancel(priv);
-	/* FIXME: This is a workaround for AP */
-	if (priv->iw_mode != NL80211_IFTYPE_AP) {
-		spin_lock_irqsave(&priv->lock, flags);
-		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
-			    CSR_UCODE_SW_BIT_RFKILL);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		/* call the host command only if no hw rf-kill set */
-		if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
-		    iwl_is_ready(priv))
-			iwl_send_card_state(priv,
-				CARD_STATE_CMD_DISABLE, 0);
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-			/* make sure mac80211 stop sending Tx frame */
-		if (priv->mac80211_registered)
-			ieee80211_stop_queues(priv->hw);
-	}
+	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
+		"seq 0x%04X ser 0x%08X\n",
+		le32_to_cpu(pkt->u.err_resp.error_type),
+		get_cmd_string(pkt->u.err_resp.cmd_id),
+		pkt->u.err_resp.cmd_id,
+		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
+		le32_to_cpu(pkt->u.err_resp.error_info));
 }
-EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
+EXPORT_SYMBOL(iwl_rx_reply_error);
+
+void iwl_clear_isr_stats(struct iwl_priv *priv)
+{
+	memset(&priv->isr_stats, 0, sizeof(priv->isr_stats));
+}
+EXPORT_SYMBOL(iwl_clear_isr_stats);
 
-int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
+int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
+			   const struct ieee80211_tx_queue_params *params)
 {
+	struct iwl_priv *priv = hw->priv;
 	unsigned long flags;
+	int q;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
 
-	if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
+	if (queue >= AC_NUM) {
+		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
 		return 0;
+	}
 
-	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO ON\n");
+	q = AC_NUM - 1 - queue;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
 
-	/* If the driver is up it will receive CARD_STATE_NOTIFICATION
-	 * notification where it will clear SW rfkill status.
-	 * Setting it here would break the handler. Only if the
-	 * interface is down we can set here since we don't
-	 * receive any further notification.
-	 */
-	if (!priv->is_open)
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
+	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
+	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+	priv->qos_data.def_qos_parm.ac[q].edca_txop =
+			cpu_to_le16((params->txop * 32));
 
-	/* wake up ucode */
-	msleep(10);
+	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
+	priv->qos_data.qos_active = 1;
+
+	if (priv->iw_mode == NL80211_IFTYPE_AP)
+		iwl_activate_qos(priv, 1);
+	else if (priv->assoc_id && iwl_is_associated(priv))
+		iwl_activate_qos(priv, 0);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_read32(priv, CSR_UCODE_DRV_GP1);
-	if (!iwl_grab_nic_access(priv))
-		iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
-		IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
-				  "disabled by HW switch\n");
-		return 0;
-	}
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
+}
+EXPORT_SYMBOL(iwl_mac_conf_tx);
+
+static void iwl_ht_conf(struct iwl_priv *priv,
+			    struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_sta_ht_cap *ht_conf;
+	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+	struct ieee80211_sta *sta;
+
+	IWL_DEBUG_MAC80211(priv, "enter: \n");
+
+	if (!iwl_conf->is_ht)
+		return;
+
 
-	/* when driver is up while rfkill is on, it wont receive
-	 * any CARD_STATE_NOTIFICATION notifications so we have to
-	 * restart it in here
+	/*
+	 * It is totally wrong to base global information on something
+	 * that is valid only when associated, alas, this driver works
+	 * that way and I don't know how to fix it.
 	 */
-	if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) {
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-		if (!iwl_is_rfkill(priv))
-			queue_work(priv->workqueue, &priv->up);
+
+	rcu_read_lock();
+	sta = ieee80211_find_sta(priv->hw, priv->bssid);
+	if (!sta) {
+		rcu_read_unlock();
+		return;
 	}
+	ht_conf = &sta->ht_cap;
+
+	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
+		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
+	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
+		iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
 
-	/* If the driver is already loaded, it will receive
-	 * CARD_STATE_NOTIFICATION notifications and the handler will
-	 * call restart to reload the driver.
+	iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
+	iwl_conf->max_amsdu_size =
+		!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
+
+	iwl_conf->supported_chan_width =
+		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
+
+	/*
+	 * XXX: The HT configuration needs to be moved into iwl_mac_config()
+	 *	to be done there correctly.
 	 */
-	return 1;
+
+	iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+	if (conf_is_ht40_minus(&priv->hw->conf))
+		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+	else if (conf_is_ht40_plus(&priv->hw->conf))
+		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+
+	/* If no above or below channel supplied disable FAT channel */
+	if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
+	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
+		iwl_conf->supported_chan_width = 0;
+
+	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
+
+	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
+
+	iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
+	iwl_conf->ht_protection =
+		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+	iwl_conf->non_GF_STA_present =
+		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+	rcu_read_unlock();
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
-EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);
 
-void iwl_bg_rf_kill(struct work_struct *work)
+#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+void iwl_bss_info_changed(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  struct ieee80211_bss_conf *bss_conf,
+			  u32 changes)
 {
-	struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
+	struct iwl_priv *priv = hw->priv;
+	int ret;
 
-	wake_up_interruptible(&priv->wait_command_queue);
+	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
 
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+	if (!iwl_is_alive(priv))
 		return;
 
 	mutex_lock(&priv->mutex);
 
-	if (!iwl_is_rfkill(priv)) {
-		IWL_DEBUG_RF_KILL(priv,
-			  "HW and/or SW RF Kill no longer active, restarting "
-			  "device\n");
-		if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
-		    test_bit(STATUS_ALIVE, &priv->status))
-			queue_work(priv->workqueue, &priv->restart);
-	} else {
-		/* make sure mac80211 stop sending Tx frame */
-		if (priv->mac80211_registered)
-			ieee80211_stop_queues(priv->hw);
+	if (changes & BSS_CHANGED_BEACON &&
+	    priv->iw_mode == NL80211_IFTYPE_AP) {
+		dev_kfree_skb(priv->ibss_beacon);
+		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
+	}
+
+	if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) {
+		/* If there is currently a HW scan going on in the background
+		 * then we need to cancel it else the RXON below will fail. */
+		if (iwl_scan_cancel_timeout(priv, 100)) {
+			IWL_WARN(priv, "Aborted scan still in progress "
+				    "after 100ms\n");
+			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
+			mutex_unlock(&priv->mutex);
+			return;
+		}
+		memcpy(priv->staging_rxon.bssid_addr,
+		       bss_conf->bssid, ETH_ALEN);
+
+		/* TODO: Audit driver for usage of these members and see
+		 * if mac80211 deprecates them (priv->bssid looks like it
+		 * shouldn't be there, but I haven't scanned the IBSS code
+		 * to verify) - jpk */
+		memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+
+		if (priv->iw_mode == NL80211_IFTYPE_AP)
+			iwlcore_config_ap(priv);
+		else {
+			int rc = iwlcore_commit_rxon(priv);
+			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
+				iwl_rxon_add_station(
+					priv, priv->active_rxon.bssid_addr, 1);
+		}
+	} else if (!iwl_is_rfkill(priv)) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv);
+	}
+
+	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+	    changes & BSS_CHANGED_BEACON) {
+		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+		if (beacon)
+			iwl_mac_beacon_update(hw, beacon);
+	}
 
-		if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
-			IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
-					  "disabled by SW switch\n");
+	mutex_unlock(&priv->mutex);
+
+	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
+				   bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
 		else
-			IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
-				    "Kill switch must be turned off for "
-				    "wireless networking to work.\n");
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+	}
+
+	if (changes & BSS_CHANGED_HT) {
+		iwl_ht_conf(priv, bss_conf);
+
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
+	}
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
+		/* This should never happen as this function should
+		 * never be called from interrupt context. */
+		if (WARN_ON_ONCE(in_interrupt()))
+			return;
+		if (bss_conf->assoc) {
+			priv->assoc_id = bss_conf->aid;
+			priv->beacon_int = bss_conf->beacon_int;
+			priv->power_data.dtim_period = bss_conf->dtim_period;
+			priv->timestamp = bss_conf->timestamp;
+			priv->assoc_capability = bss_conf->assoc_capability;
+
+			/* we have just associated, don't start scan too early
+			 * leave time for EAPOL exchange to complete
+			 */
+			priv->next_scan_jiffies = jiffies +
+					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
+			mutex_lock(&priv->mutex);
+			priv->cfg->ops->lib->post_associate(priv);
+			mutex_unlock(&priv->mutex);
+		} else {
+			priv->assoc_id = 0;
+			IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
+		}
+	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+			IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
+			ret = iwl_send_rxon_assoc(priv);
+			if (!ret)
+				/* Sync active_rxon with latest change. */
+				memcpy((void *)&priv->active_rxon,
+					&priv->staging_rxon,
+					sizeof(struct iwl_rxon_cmd));
+	}
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_bss_info_changed);
+
+int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	__le64 timestamp;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = skb;
+
+	priv->assoc_id = 0;
+	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+	priv->timestamp = le64_to_cpu(timestamp);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_reset_qos(priv);
+
+	priv->cfg->ops->lib->post_associate(priv);
+
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_mac_beacon_update);
+
+int iwl_set_mode(struct iwl_priv *priv, int mode)
+{
+	if (mode == NL80211_IFTYPE_ADHOC) {
+		const struct iwl_channel_info *ch_info;
+
+		ch_info = iwl_get_channel_info(priv,
+			priv->band,
+			le16_to_cpu(priv->staging_rxon.channel));
+
+		if (!ch_info || !is_channel_ibss(ch_info)) {
+			IWL_ERR(priv, "channel %d not IBSS channel\n",
+				  le16_to_cpu(priv->staging_rxon.channel));
+			return -EINVAL;
+		}
+	}
+
+	iwl_connection_init_rx_config(priv, mode);
+
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+
+	iwl_clear_stations_table(priv);
+
+	/* dont commit rxon if rf-kill is on*/
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
+	iwlcore_commit_rxon(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_set_mode);
+
+int iwl_mac_add_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+
+	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
+
+	if (priv->vif) {
+		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
+		return -EOPNOTSUPP;
 	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->vif = conf->vif;
+	priv->iw_mode = conf->type;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	mutex_lock(&priv->mutex);
+
+	if (conf->mac_addr) {
+		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
+		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+	}
+
+	if (iwl_set_mode(priv, conf->type) == -EAGAIN)
+		/* we are not ready, will run again when ready */
+		set_bit(STATUS_MODE_PENDING, &priv->status);
+
 	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
 }
-EXPORT_SYMBOL(iwl_bg_rf_kill);
+EXPORT_SYMBOL(iwl_mac_add_interface);
 
-void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
-			   struct iwl_rx_mem_buffer *rxb)
+void iwl_mac_remove_interface(struct ieee80211_hw *hw,
+				     struct ieee80211_if_init_conf *conf)
 {
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
-	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
-		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
-#endif
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	mutex_lock(&priv->mutex);
+
+	if (iwl_is_ready_rf(priv)) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv);
+	}
+	if (priv->vif == conf->vif) {
+		priv->vif = NULL;
+		memset(priv->bssid, 0, ETH_ALEN);
+	}
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
 }
-EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
+EXPORT_SYMBOL(iwl_mac_remove_interface);
 
-void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
-				      struct iwl_rx_mem_buffer *rxb)
+/**
+ * iwl_mac_config - mac80211 config callback
+ *
+ * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
-			"notification for %s:\n",
-			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
-	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+	struct iwl_priv *priv = hw->priv;
+	const struct iwl_channel_info *ch_info;
+	struct ieee80211_conf *conf = &hw->conf;
+	unsigned long flags = 0;
+	int ret = 0;
+	u16 ch;
+	int scan_active = 0;
+
+	mutex_lock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
+					conf->channel->hw_value, changed);
+
+	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+			test_bit(STATUS_SCANNING, &priv->status))) {
+		scan_active = 1;
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+	}
+
+
+	/* during scanning mac80211 will delay channel setting until
+	 * scan finish with changed = 0
+	 */
+	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+		if (scan_active)
+			goto set_ch_out;
+
+		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
+		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+			!is_channel_ibss(ch_info)) {
+			IWL_ERR(priv, "channel %d in band %d not "
+				"IBSS channel\n",
+				conf->channel->hw_value, conf->channel->band);
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		priv->current_ht_config.is_ht = conf_is_ht(conf);
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+
+		/* if we are switching from ht to 2.4 clear flags
+		 * from any ht related info since 2.4 does not
+		 * support ht */
+		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
+			priv->staging_rxon.flags = 0;
+
+		iwl_set_rxon_channel(priv, conf->channel);
+
+		iwl_set_flags_for_band(priv, conf->channel->band);
+		spin_unlock_irqrestore(&priv->lock, flags);
+ set_ch_out:
+		/* The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists */
+		iwl_set_rate(priv);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS &&
+	    priv->iw_mode == NL80211_IFTYPE_STATION) {
+		priv->power_data.power_disabled =
+			!(conf->flags & IEEE80211_CONF_PS);
+		ret = iwl_power_update_mode(priv, 0);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		goto out;
+	}
+
+	if (scan_active)
+		goto out;
+
+	if (memcmp(&priv->active_rxon,
+		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
+		iwlcore_commit_rxon(priv);
+	else
+		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n");
+
+
+out:
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	mutex_unlock(&priv->mutex);
+	return ret;
 }
-EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
+EXPORT_SYMBOL(iwl_mac_config);
 
-void iwl_rx_reply_error(struct iwl_priv *priv,
-			struct iwl_rx_mem_buffer *rxb)
+int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
+			 struct ieee80211_tx_queue_stats *stats)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_priv *priv = hw->priv;
+	int i, avail;
+	struct iwl_tx_queue *txq;
+	struct iwl_queue *q;
+	unsigned long flags;
 
-	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
-		"seq 0x%04X ser 0x%08X\n",
-		le32_to_cpu(pkt->u.err_resp.error_type),
-		get_cmd_string(pkt->u.err_resp.cmd_id),
-		pkt->u.err_resp.cmd_id,
-		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
-		le32_to_cpu(pkt->u.err_resp.error_info));
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	for (i = 0; i < AC_NUM; i++) {
+		txq = &priv->txq[i];
+		q = &txq->q;
+		avail = iwl_queue_space(q);
+
+		stats[i].len = q->n_window - avail;
+		stats[i].limit = q->n_window - q->high_mark;
+		stats[i].count = q->n_window;
+
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return 0;
 }
-EXPORT_SYMBOL(iwl_rx_reply_error);
+EXPORT_SYMBOL(iwl_mac_get_tx_stats);
+
+void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	spin_lock_irqsave(&priv->lock, flags);
+	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_reset_qos(priv);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->assoc_id = 0;
+	priv->assoc_capability = 0;
+	priv->assoc_station_added = 0;
+
+	/* new association get rid of ibss beacon skb */
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = NULL;
+
+	priv->beacon_int = priv->vif->bss_conf.beacon_int;
+	priv->timestamp = 0;
+	if ((priv->iw_mode == NL80211_IFTYPE_STATION))
+		priv->beacon_int = 0;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	/* we are restarting association process
+	 * clear RXON_FILTER_ASSOC_MSK bit
+	 */
+	if (priv->iw_mode != NL80211_IFTYPE_AP) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv);
+	}
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	iwl_set_rate(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_mac_reset_tsf);
+
+#ifdef CONFIG_PM
+
+int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+
+	/*
+	 * This function is called when system goes into suspend state
+	 * mac80211 will call iwl_mac_stop() from the mac80211 suspend function
+	 * first but since iwl_mac_stop() has no knowledge of who the caller is,
+	 * it will not call apm_ops.stop() to stop the DMA operation.
+	 * Calling apm_ops.stop here to make sure we stop the DMA.
+	 */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_pci_suspend);
+
+int iwl_pci_resume(struct pci_dev *pdev)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+	pci_restore_state(pdev);
+	iwl_enable_interrupts(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_pci_resume);
 
+#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index a8eac8c3c1f..dabf663e36e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -85,7 +85,10 @@ struct iwl_cmd;
 
 struct iwl_hcmd_ops {
 	int (*rxon_assoc)(struct iwl_priv *priv);
+	int (*commit_rxon)(struct iwl_priv *priv);
+	void (*set_rxon_chain)(struct iwl_priv *priv);
 };
+
 struct iwl_hcmd_utils_ops {
 	u16 (*get_hcmd_size)(u8 cmd_id, u16 len);
 	u16 (*build_addsta_hcmd)(const struct iwl_addsta_cmd *cmd, u8 *data);
@@ -100,6 +103,19 @@ struct iwl_hcmd_utils_ops {
 			  struct iwl_rx_phy_res *rx_resp);
 };
 
+struct iwl_apm_ops {
+	int (*init)(struct iwl_priv *priv);
+	int (*reset)(struct iwl_priv *priv);
+	void (*stop)(struct iwl_priv *priv);
+	void (*config)(struct iwl_priv *priv);
+	int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
+};
+
+struct iwl_temp_ops {
+	void (*temperature)(struct iwl_priv *priv);
+	void (*set_ct_kill)(struct iwl_priv *priv);
+};
+
 struct iwl_lib_ops {
 	/* set hw dependent parameters */
 	int (*set_hw_params)(struct iwl_priv *priv);
@@ -137,20 +153,21 @@ struct iwl_lib_ops {
 	int (*is_valid_rtc_data_addr)(u32 addr);
 	/* 1st ucode load */
 	int (*load_ucode)(struct iwl_priv *priv);
-	 /* power management */
-	struct {
-		int (*init)(struct iwl_priv *priv);
-		int (*reset)(struct iwl_priv *priv);
-		void (*stop)(struct iwl_priv *priv);
-		void (*config)(struct iwl_priv *priv);
-		int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
-	} apm_ops;
+	/* power management */
+	struct iwl_apm_ops apm_ops;
+
 	/* power */
 	int (*send_tx_power) (struct iwl_priv *priv);
 	void (*update_chain_flags)(struct iwl_priv *priv);
-	void (*temperature) (struct iwl_priv *priv);
+	void (*post_associate) (struct iwl_priv *priv);
+	void (*config_ap) (struct iwl_priv *priv);
+	irqreturn_t (*isr) (int irq, void *data);
+
 	/* eeprom operations (as defined in iwl-eeprom.h) */
 	struct iwl_eeprom_ops eeprom_ops;
+
+	/* temperature */
+	struct iwl_temp_ops temp_ops;
 };
 
 struct iwl_ops {
@@ -160,13 +177,12 @@ struct iwl_ops {
 };
 
 struct iwl_mod_params {
-	int disable;		/* def: 0 = enable radio */
 	int sw_crypto;		/* def: 0 = using hardware encryption */
 	u32 debug;		/* def: 0 = minimal debug log messages */
 	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
 	int num_of_ampdu_queues;/* def: HW dependent */
-	int disable_11n;	/* def: 0 = disable 11n capabilities */
+	int disable_11n;	/* def: 0 = 11n capabilities enabled */
 	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
 	int antenna;  		/* def: 0 = both antennas (use diversity) */
 	int restart_fw;		/* def: 1 = restart firmware */
@@ -214,6 +230,7 @@ struct iwl_cfg {
 	u8   valid_tx_ant;
 	u8   valid_rx_ant;
 	bool need_pll_cfg;
+	bool use_isr_legacy;
 };
 
 /***************************
@@ -225,6 +242,8 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
 void iwl_hw_detect(struct iwl_priv *priv);
 void iwl_reset_qos(struct iwl_priv *priv);
 void iwl_activate_qos(struct iwl_priv *priv, u8 force);
+int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
+		    const struct ieee80211_tx_queue_params *params);
 void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt);
 int iwl_check_rxon_cmd(struct iwl_priv *priv);
 int iwl_full_rxon_required(struct iwl_priv *priv);
@@ -249,6 +268,24 @@ int iwl_setup_mac(struct iwl_priv *priv);
 int iwl_set_hw_params(struct iwl_priv *priv);
 int iwl_init_drv(struct iwl_priv *priv);
 void iwl_uninit_drv(struct iwl_priv *priv);
+bool iwl_is_monitor_mode(struct iwl_priv *priv);
+void iwl_post_associate(struct iwl_priv *priv);
+void iwl_bss_info_changed(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *bss_conf,
+				     u32 changes);
+int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb);
+int iwl_commit_rxon(struct iwl_priv *priv);
+int iwl_set_mode(struct iwl_priv *priv, int mode);
+int iwl_mac_add_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf);
+void iwl_mac_remove_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf);
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
+void iwl_config_ap(struct iwl_priv *priv);
+int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
+			 struct ieee80211_tx_queue_stats *stats);
+void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
 
 /*****************************************************
  * RX handlers.
@@ -271,10 +308,11 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
 				  struct iwl_rx_queue *q);
 void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 void iwl_rx_replenish(struct iwl_priv *priv);
+void iwl_rx_replenish_now(struct iwl_priv *priv);
 int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 int iwl_rx_queue_restock(struct iwl_priv *priv);
 int iwl_rx_queue_space(const struct iwl_rx_queue *q);
-void iwl_rx_allocate(struct iwl_priv *priv);
+void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority);
 void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
 int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index);
 /* Handlers */
@@ -310,14 +348,6 @@ int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id);
  ****************************************************/
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
 
-/*****************************************************
- * RF -Kill - here and not in iwl-rfkill.h to be available when
- * RF-kill subsystem is not compiled.
- ****************************************************/
-void iwl_bg_rf_kill(struct work_struct *work);
-void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv);
-int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv);
-
 /*******************************************************************************
  * Rate
  ******************************************************************************/
@@ -328,8 +358,6 @@ int iwl_hwrate_to_plcp_idx(u32 rate_n_flags);
 
 u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv);
 
-void iwl_set_rate(struct iwl_priv *priv);
-
 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx);
 
 static inline u32 iwl_ant_idx_to_flags(u8 ant_idx)
@@ -358,8 +386,8 @@ int iwl_scan_cancel(struct iwl_priv *priv);
 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
 int iwl_scan_initiate(struct iwl_priv *priv);
 int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
-u16 iwl_fill_probe_req(struct iwl_priv *priv, enum ieee80211_band band,
-		       struct ieee80211_mgmt *frame, int left);
+u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
+		       const u8 *ie, int ie_len, int left);
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
 u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 			      enum ieee80211_band band,
@@ -423,7 +451,13 @@ int iwl_send_card_state(struct iwl_priv *priv, u32 flags,
  *****************************************************/
 void iwl_disable_interrupts(struct iwl_priv *priv);
 void iwl_enable_interrupts(struct iwl_priv *priv);
-irqreturn_t iwl_isr(int irq, void *data);
+irqreturn_t iwl_isr_legacy(int irq, void *data);
+int iwl_reset_ict(struct iwl_priv *priv);
+void iwl_disable_ict(struct iwl_priv *priv);
+int iwl_alloc_isr_ict(struct iwl_priv *priv);
+void iwl_free_isr_ict(struct iwl_priv *priv);
+irqreturn_t iwl_isr_ict(int irq, void *data);
+
 static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 {
 	int pos;
@@ -432,12 +466,17 @@ static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 	pci_read_config_word(priv->pci_dev, pos + PCI_EXP_LNKCTL, &pci_lnk_ctl);
 	return pci_lnk_ctl;
 }
+#ifdef CONFIG_PM
+int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
+int iwl_pci_resume(struct pci_dev *pdev);
+#endif /* CONFIG_PM */
 
 /*****************************************************
 *  Error Handling Debugging
 ******************************************************/
 void iwl_dump_nic_error_log(struct iwl_priv *priv);
 void iwl_dump_nic_event_log(struct iwl_priv *priv);
+void iwl_clear_isr_stats(struct iwl_priv *priv);
 
 /*****************************************************
 *  GEOS
@@ -451,14 +490,12 @@ void iwlcore_free_geos(struct iwl_priv *priv);
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
-#define STATUS_RF_KILL_SW	4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7
 #define STATUS_TEMPERATURE	8
 #define STATUS_GEO_CONFIGURED	9
 #define STATUS_EXIT_PENDING	10
-#define STATUS_IN_SUSPEND	11
 #define STATUS_STATISTICS	12
 #define STATUS_SCANNING		13
 #define STATUS_SCAN_ABORTING	14
@@ -487,11 +524,6 @@ static inline int iwl_is_init(struct iwl_priv *priv)
 	return test_bit(STATUS_INIT, &priv->status);
 }
 
-static inline int iwl_is_rfkill_sw(struct iwl_priv *priv)
-{
-	return test_bit(STATUS_RF_KILL_SW, &priv->status);
-}
-
 static inline int iwl_is_rfkill_hw(struct iwl_priv *priv)
 {
 	return test_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -499,7 +531,7 @@ static inline int iwl_is_rfkill_hw(struct iwl_priv *priv)
 
 static inline int iwl_is_rfkill(struct iwl_priv *priv)
 {
-	return iwl_is_rfkill_hw(priv) || iwl_is_rfkill_sw(priv);
+	return iwl_is_rfkill_hw(priv);
 }
 
 static inline int iwl_is_ready_rf(struct iwl_priv *priv)
@@ -528,7 +560,14 @@ static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
 {
 	return priv->cfg->ops->hcmd->rxon_assoc(priv);
 }
-
+static inline int iwlcore_commit_rxon(struct iwl_priv *priv)
+{
+	return priv->cfg->ops->hcmd->commit_rxon(priv);
+}
+static inline void iwlcore_config_ap(struct iwl_priv *priv)
+{
+	priv->cfg->ops->lib->config_ap(priv);
+}
 static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
 			struct iwl_priv *priv, enum ieee80211_band band)
 {
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 6e983149b83..f03dae1b2f3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -89,6 +89,7 @@
 /* EEPROM reads */
 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
+#define CSR_OTP_GP_REG   	(CSR_BASE+0x034)
 #define CSR_GIO_REG		(CSR_BASE+0x03C)
 #define CSR_GP_UCODE		(CSR_BASE+0x044)
 #define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
@@ -96,8 +97,10 @@
 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
 #define CSR_LED_REG             (CSR_BASE+0x094)
+#define CSR_DRAM_INT_TBL_REG	(CSR_BASE+0x0A0)
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
 
+#define CSR_INT_PERIODIC_REG	(CSR_BASE+0x005)
 /* Analog phase-lock-loop configuration  */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
 /*
@@ -123,16 +126,18 @@
 
 #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A		(0x00080000)
 #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM		(0x00200000)
-#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM		(0x00400000)
-#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN			(0x02000000)
-#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME		(0x08000000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY		(0x00400000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE	(0x02000000)
+#define CSR_HW_IF_CONFIG_REG_PREPARE			(0x08000000)
 
+#define CSR_INT_PERIODIC_DIS			(0x00)
+#define CSR_INT_PERIODIC_ENA			(0xFF)
 
 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
  * acknowledged (reset) by host writing "1" to flagged bits. */
 #define CSR_INT_BIT_FH_RX        (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
 #define CSR_INT_BIT_HW_ERR       (1 << 29) /* DMA hardware error FH_INT[31] */
-#define CSR_INT_BIT_DNLD         (1 << 28) /* uCode Download */
+#define CSR_INT_BIT_RX_PERIODIC	 (1 << 28) /* Rx periodic */
 #define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
 #define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
 #define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
@@ -226,6 +231,10 @@
 #define CSR_EEPROM_GP_VALID_MSK		(0x00000007)
 #define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
+#define CSR_OTP_GP_REG_DEVICE_SELECT	(0x00010000) /* 0 - EEPROM, 1 - OTP */
+#define CSR_OTP_GP_REG_OTP_ACCESS_MODE	(0x00020000) /* 0 - absolute, 1 - relative */
+#define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK          (0x00100000) /* bit 20 */
+#define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK        (0x00200000) /* bit 21 */
 
 /* CSR GIO */
 #define CSR_GIO_REG_VAL_L0S_ENABLED	(0x00000002)
@@ -251,6 +260,11 @@
 
 /* HPET MEM debug */
 #define CSR_DBG_HPET_MEM_REG_VAL	(0xFFFF0000)
+
+/* DRAM INT TABLE */
+#define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
+#define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
+
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE	(0x400)
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 65d1a7f2db9..2cf014f523b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -68,13 +68,14 @@ struct iwl_debugfs {
 	struct dentry *dir_rf;
 	struct dir_data_files {
 		struct dentry *file_sram;
-		struct dentry *file_eeprom;
+		struct dentry *file_nvm;
 		struct dentry *file_stations;
 		struct dentry *file_rx_statistics;
 		struct dentry *file_tx_statistics;
 		struct dentry *file_log_event;
 		struct dentry *file_channels;
 		struct dentry *file_status;
+		struct dentry *file_interrupt;
 	} dbgfs_data_files;
 	struct dir_rf_files {
 		struct dentry *file_disable_sensitivity;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 64eb585f157..11e08c06891 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -172,7 +172,6 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
 	const size_t bufsz = sizeof(buf);
 
-	iwl_grab_nic_access(priv);
 	for (i = priv->dbgfs->sram_len; i > 0; i -= 4) {
 		val = iwl_read_targ_mem(priv, priv->dbgfs->sram_offset + \
 					priv->dbgfs->sram_len - i);
@@ -192,7 +191,6 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 		pos += scnprintf(buf + pos, bufsz - pos, "0x%08x ", val);
 	}
 	pos += scnprintf(buf + pos, bufsz - pos, "\n");
-	iwl_release_nic_access(priv);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	return ret;
@@ -292,7 +290,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
-static ssize_t iwl_dbgfs_eeprom_read(struct file *file,
+static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 				       char __user *user_buf,
 				       size_t count,
 				       loff_t *ppos)
@@ -306,7 +304,7 @@ static ssize_t iwl_dbgfs_eeprom_read(struct file *file,
 	buf_size = 4 * eeprom_len + 256;
 
 	if (eeprom_len % 16) {
-		IWL_ERR(priv, "EEPROM size is not multiple of 16.\n");
+		IWL_ERR(priv, "NVM size is not multiple of 16.\n");
 		return -ENODATA;
 	}
 
@@ -318,6 +316,13 @@ static ssize_t iwl_dbgfs_eeprom_read(struct file *file,
 	}
 
 	ptr = priv->eeprom;
+	if (!ptr) {
+		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+		return -ENOMEM;
+	}
+	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
+			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+			? "OTP" : "EEPROM");
 	for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) {
 		pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
 		hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
@@ -375,51 +380,53 @@ static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
 	}
 
 	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ);
-	channels = supp_band->channels;
-
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"Displaying %d channels in 2.4GHz band 802.11bg):\n",
-			 supp_band->n_channels);
+	if (supp_band) {
+		channels = supp_band->channels;
 
-	for (i = 0; i < supp_band->n_channels; i++)
 		pos += scnprintf(buf + pos, bufsz - pos,
-				"%d: %ddBm: BSS%s%s, %s.\n",
-				ieee80211_frequency_to_channel(
-				channels[i].center_freq),
-				channels[i].max_power,
-				channels[i].flags & IEEE80211_CHAN_RADAR ?
-				" (IEEE 802.11h required)" : "",
-				(!(channels[i].flags & IEEE80211_CHAN_NO_IBSS)
-				|| (channels[i].flags &
-				IEEE80211_CHAN_RADAR)) ? "" :
-				", IBSS",
-				channels[i].flags &
-				IEEE80211_CHAN_PASSIVE_SCAN ?
-				"passive only" : "active/passive");
+				"Displaying %d channels in 2.4GHz band 802.11bg):\n",
+				supp_band->n_channels);
 
+		for (i = 0; i < supp_band->n_channels; i++)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					"%d: %ddBm: BSS%s%s, %s.\n",
+					ieee80211_frequency_to_channel(
+					channels[i].center_freq),
+					channels[i].max_power,
+					channels[i].flags & IEEE80211_CHAN_RADAR ?
+					" (IEEE 802.11h required)" : "",
+					((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+					|| (channels[i].flags &
+					IEEE80211_CHAN_RADAR)) ? "" :
+					", IBSS",
+					channels[i].flags &
+					IEEE80211_CHAN_PASSIVE_SCAN ?
+					"passive only" : "active/passive");
+	}
 	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ);
-	channels = supp_band->channels;
-
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"Displaying %d channels in 5.2GHz band (802.11a)\n",
-			supp_band->n_channels);
+	if (supp_band) {
+		channels = supp_band->channels;
 
-	for (i = 0; i < supp_band->n_channels; i++)
 		pos += scnprintf(buf + pos, bufsz - pos,
-				"%d: %ddBm: BSS%s%s, %s.\n",
-				ieee80211_frequency_to_channel(
-				channels[i].center_freq),
-				channels[i].max_power,
-				channels[i].flags & IEEE80211_CHAN_RADAR ?
-				" (IEEE 802.11h required)" : "",
-				((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
-				|| (channels[i].flags &
-				IEEE80211_CHAN_RADAR)) ? "" :
-				", IBSS",
-				channels[i].flags &
-				IEEE80211_CHAN_PASSIVE_SCAN ?
-				"passive only" : "active/passive");
+				"Displaying %d channels in 5.2GHz band (802.11a)\n",
+				supp_band->n_channels);
 
+		for (i = 0; i < supp_band->n_channels; i++)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					"%d: %ddBm: BSS%s%s, %s.\n",
+					ieee80211_frequency_to_channel(
+					channels[i].center_freq),
+					channels[i].max_power,
+					channels[i].flags & IEEE80211_CHAN_RADAR ?
+					" (IEEE 802.11h required)" : "",
+					((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+					|| (channels[i].flags &
+					IEEE80211_CHAN_RADAR)) ? "" :
+					", IBSS",
+					channels[i].flags &
+					IEEE80211_CHAN_PASSIVE_SCAN ?
+					"passive only" : "active/passive");
+	}
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
 	return ret;
@@ -442,8 +449,6 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 		test_bit(STATUS_INT_ENABLED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
 		test_bit(STATUS_RF_KILL_HW, &priv->status));
-	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_SW:\t %d\n",
-		test_bit(STATUS_RF_KILL_SW, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n",
 		test_bit(STATUS_INIT, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
@@ -456,8 +461,6 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 		test_bit(STATUS_GEO_CONFIGURED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n",
 		test_bit(STATUS_EXIT_PENDING, &priv->status));
-	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_IN_SUSPEND:\t %d\n",
-		test_bit(STATUS_IN_SUSPEND, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n",
 		test_bit(STATUS_STATISTICS, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n",
@@ -475,14 +478,104 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t iwl_dbgfs_interrupt_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	int cnt = 0;
+	char *buf;
+	int bufsz = 24 * 64; /* 24 items * 64 char per item */
+	ssize_t ret;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf) {
+		IWL_ERR(priv, "Can not allocate Buffer\n");
+		return -ENOMEM;
+	}
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"Interrupt Statistics Report:\n");
+
+	pos += scnprintf(buf + pos, bufsz - pos, "HW Error:\t\t\t %u\n",
+		priv->isr_stats.hw);
+	pos += scnprintf(buf + pos, bufsz - pos, "SW Error:\t\t\t %u\n",
+		priv->isr_stats.sw);
+	if (priv->isr_stats.sw > 0) {
+		pos += scnprintf(buf + pos, bufsz - pos,
+			"\tLast Restarting Code:  0x%X\n",
+			priv->isr_stats.sw_err);
+	}
+#ifdef CONFIG_IWLWIFI_DEBUG
+	pos += scnprintf(buf + pos, bufsz - pos, "Frame transmitted:\t\t %u\n",
+		priv->isr_stats.sch);
+	pos += scnprintf(buf + pos, bufsz - pos, "Alive interrupt:\t\t %u\n",
+		priv->isr_stats.alive);
+#endif
+	pos += scnprintf(buf + pos, bufsz - pos,
+		"HW RF KILL switch toggled:\t %u\n",
+		priv->isr_stats.rfkill);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "CT KILL:\t\t\t %u\n",
+		priv->isr_stats.ctkill);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Wakeup Interrupt:\t\t %u\n",
+		priv->isr_stats.wakeup);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+		"Rx command responses:\t\t %u\n",
+		priv->isr_stats.rx);
+	for (cnt = 0; cnt < REPLY_MAX; cnt++) {
+		if (priv->isr_stats.rx_handlers[cnt] > 0)
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"\tRx handler[%36s]:\t\t %u\n",
+				get_cmd_string(cnt),
+				priv->isr_stats.rx_handlers[cnt]);
+	}
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Tx/FH interrupt:\t\t %u\n",
+		priv->isr_stats.tx);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Unexpected INTA:\t\t %u\n",
+		priv->isr_stats.unhandled);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_interrupt_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	u32 reset_flag;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%x", &reset_flag) != 1)
+		return -EFAULT;
+	if (reset_flag == 0)
+		iwl_clear_isr_stats(priv);
+
+	return count;
+}
+
+
 DEBUGFS_READ_WRITE_FILE_OPS(sram);
 DEBUGFS_WRITE_FILE_OPS(log_event);
-DEBUGFS_READ_FILE_OPS(eeprom);
+DEBUGFS_READ_FILE_OPS(nvm);
 DEBUGFS_READ_FILE_OPS(stations);
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_FILE_OPS(channels);
 DEBUGFS_READ_FILE_OPS(status);
+DEBUGFS_READ_WRITE_FILE_OPS(interrupt);
 
 /*
  * Create the debugfs files and directories
@@ -510,7 +603,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 
 	DEBUGFS_ADD_DIR(data, dbgfs->dir_drv);
 	DEBUGFS_ADD_DIR(rf, dbgfs->dir_drv);
-	DEBUGFS_ADD_FILE(eeprom, data);
+	DEBUGFS_ADD_FILE(nvm, data);
 	DEBUGFS_ADD_FILE(sram, data);
 	DEBUGFS_ADD_FILE(log_event, data);
 	DEBUGFS_ADD_FILE(stations, data);
@@ -518,6 +611,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(tx_statistics, data);
 	DEBUGFS_ADD_FILE(channels, data);
 	DEBUGFS_ADD_FILE(status, data);
+	DEBUGFS_ADD_FILE(interrupt, data);
 	DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
 	DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
 			 &priv->disable_chain_noise_cal);
@@ -540,7 +634,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	if (!priv->dbgfs)
 		return;
 
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_nvm);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_rx_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_tx_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sram);
@@ -548,6 +642,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_channels);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_interrupt);
 	DEBUGFS_REMOVE(priv->dbgfs->dir_data);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index cf7f0db58fc..e2d620f0b6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -41,7 +41,6 @@
 #include "iwl-prph.h"
 #include "iwl-fh.h"
 #include "iwl-debug.h"
-#include "iwl-rfkill.h"
 #include "iwl-4965-hw.h"
 #include "iwl-3945-hw.h"
 #include "iwl-3945-led.h"
@@ -289,11 +288,11 @@ struct iwl_frame {
 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
 
 enum {
-	/* CMD_SIZE_NORMAL = 0, */
+	CMD_SYNC = 0,
+	CMD_SIZE_NORMAL = 0,
+	CMD_NO_SKB = 0,
 	CMD_SIZE_HUGE = (1 << 0),
-	/* CMD_SYNC = 0, */
 	CMD_ASYNC = (1 << 1),
-	/* CMD_NO_SKB = 0, */
 	CMD_WANT_SKB = (1 << 2),
 };
 
@@ -381,6 +380,7 @@ struct iwl_rx_queue {
 	u32 read;
 	u32 write;
 	u32 free_count;
+	u32 write_actual;
 	struct list_head rx_free;
 	struct list_head rx_used;
 	int need_update;
@@ -498,22 +498,13 @@ struct iwl_qos_info {
 #define STA_PS_STATUS_WAKE             0
 #define STA_PS_STATUS_SLEEP            1
 
-struct iwl3945_tid_data {
-	u16 seq_number;
-};
-
-struct iwl3945_hw_key {
-	enum ieee80211_key_alg alg;
-	int keylen;
-	u8 key[32];
-};
 
 struct iwl3945_station_entry {
 	struct iwl3945_addsta_cmd sta;
-	struct iwl3945_tid_data tid[MAX_TID_COUNT];
+	struct iwl_tid_data tid[MAX_TID_COUNT];
 	u8 used;
 	u8 ps_status;
-	struct iwl3945_hw_key keyinfo;
+	struct iwl_hw_key keyinfo;
 };
 
 struct iwl_station_entry {
@@ -822,6 +813,26 @@ enum {
 	MEASUREMENT_ACTIVE = (1 << 1),
 };
 
+enum iwl_nvm_type {
+	NVM_DEVICE_TYPE_EEPROM = 0,
+	NVM_DEVICE_TYPE_OTP,
+};
+
+/* interrupt statistics */
+struct isr_statistics {
+	u32 hw;
+	u32 sw;
+	u32 sw_err;
+	u32 sch;
+	u32 alive;
+	u32 rfkill;
+	u32 ctkill;
+	u32 wakeup;
+	u32 rx;
+	u32 rx_handlers[REPLY_MAX];
+	u32 tx;
+	u32 unhandled;
+};
 
 #define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
 
@@ -877,15 +888,14 @@ struct iwl_priv {
 	unsigned long scan_start_tsf;
 	void *scan;
 	int scan_bands;
-	int one_direct_scan;
-	u8 direct_ssid_len;
-	u8 direct_ssid[IW_ESSID_MAX_SIZE];
+	struct cfg80211_scan_request *scan_request;
 	u8 scan_tx_ant[IEEE80211_NUM_BANDS];
 	u8 mgmt_tx_ant;
 
 	/* spinlock */
 	spinlock_t lock;	/* protect general shared data */
 	spinlock_t hcmd_lock;	/* protect hcmd */
+	spinlock_t reg_lock;	/* protect hw register access */
 	struct mutex mutex;
 
 	/* basic pci-network driver stuff */
@@ -919,16 +929,12 @@ struct iwl_priv {
 	const struct iwl_rxon_cmd active_rxon;
 	struct iwl_rxon_cmd staging_rxon;
 
-	int error_recovering;
 	struct iwl_rxon_cmd recovery_rxon;
 
 	/* 1st responses from initialize and runtime uCode images.
 	 * 4965's initialize alive response contains some calibration data. */
 	struct iwl_init_alive_resp card_alive_init;
 	struct iwl_alive_resp card_alive;
-#if defined(CONFIG_IWLWIFI_RFKILL)
-	struct rfkill *rfkill;
-#endif
 
 #ifdef CONFIG_IWLWIFI_LEDS
 	unsigned long last_blink_time;
@@ -978,6 +984,9 @@ struct iwl_priv {
 		u64 bytes;
 	} tx_stats[3], rx_stats[3];
 
+	/* counts interrupts */
+	struct isr_statistics isr_stats;
+
 	struct iwl_power_mgr power_data;
 
 	struct iwl_notif_statistics statistics;
@@ -1017,6 +1026,7 @@ struct iwl_priv {
 
 	/* eeprom */
 	u8 *eeprom;
+	int    nvm_device_type;
 	struct iwl_eeprom_calib_info *calib_info;
 
 	enum nl80211_iftype iw_mode;
@@ -1034,7 +1044,16 @@ struct iwl_priv {
 	/*End*/
 	struct iwl_hw_params hw_params;
 
+	/* INT ICT Table */
+	u32 *ict_tbl;
+	dma_addr_t ict_tbl_dma;
+	dma_addr_t aligned_ict_tbl_dma;
+	int ict_index;
+	void *ict_tbl_vir;
+	u32 inta;
+	bool use_ict;
 
+	u32 inta_mask;
 	/* Current association information needed to configure the
 	 * hardware */
 	u16 assoc_id;
@@ -1049,7 +1068,6 @@ struct iwl_priv {
 	struct work_struct calibrated_work;
 	struct work_struct scan_completed;
 	struct work_struct rx_replenish;
-	struct work_struct rf_kill;
 	struct work_struct abort_scan;
 	struct work_struct update_link_led;
 	struct work_struct auth_work;
@@ -1059,7 +1077,6 @@ struct iwl_priv {
 
 	struct tasklet_struct irq_tasklet;
 
-	struct delayed_work set_power_save;
 	struct delayed_work init_alive_start;
 	struct delayed_work alive_start;
 	struct delayed_work scan_check;
@@ -1090,14 +1107,12 @@ struct iwl_priv {
 	u32 disable_tx_power_cal;
 	struct work_struct run_time_calib_work;
 	struct timer_list statistics_periodic;
-
+	bool hw_ready;
 	/*For 3945*/
 #define IWL_DEFAULT_TX_POWER 0x0F
 
 	struct iwl3945_notif_statistics statistics_39;
 
-	struct iwl3945_station_entry stations_39[IWL_STATION_COUNT];
-
 	u32 sta_supp_rates;
 }; /*iwl_priv */
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 75517d05df0..7d7554a2f34 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -152,6 +152,32 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
 
+static int iwlcore_get_nvm_type(struct iwl_priv *priv)
+{
+	u32 otpgp;
+	int nvm_type;
+
+	/* OTP only valid for CP/PP and after */
+	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+	case CSR_HW_REV_TYPE_3945:
+	case CSR_HW_REV_TYPE_4965:
+	case CSR_HW_REV_TYPE_5300:
+	case CSR_HW_REV_TYPE_5350:
+	case CSR_HW_REV_TYPE_5100:
+	case CSR_HW_REV_TYPE_5150:
+		nvm_type = NVM_DEVICE_TYPE_EEPROM;
+		break;
+	default:
+		otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+		if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
+			nvm_type = NVM_DEVICE_TYPE_OTP;
+		else
+			nvm_type = NVM_DEVICE_TYPE_EEPROM;
+		break;
+	}
+	return  nvm_type;
+}
+
 /*
  * The device's EEPROM semaphore prevents conflicts between driver and uCode
  * when accessing the EEPROM; each access is a series of pulses to/from the
@@ -198,6 +224,31 @@ const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
 }
 EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
 
+static int iwl_init_otp_access(struct iwl_priv *priv)
+{
+	int ret;
+
+	/* Enable 40MHz radio clock */
+	_iwl_write32(priv, CSR_GP_CNTRL,
+		     _iwl_read32(priv, CSR_GP_CNTRL) |
+		     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/* wait for clock to be ready */
+	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
+				  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+				  25000);
+	if (ret < 0)
+		IWL_ERR(priv, "Time out access OTP\n");
+	else {
+		iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
+				  APMG_PS_CTRL_VAL_RESET_REQ);
+		udelay(5);
+		iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
+				    APMG_PS_CTRL_VAL_RESET_REQ);
+	}
+	return ret;
+}
+
 /**
  * iwl_eeprom_init - read EEPROM contents
  *
@@ -209,11 +260,18 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 {
 	u16 *e;
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
-	int sz = priv->cfg->eeprom_size;
+	int sz;
 	int ret;
 	u16 addr;
+	u32 otpgp;
+
+	priv->nvm_device_type = iwlcore_get_nvm_type(priv);
 
 	/* allocate eeprom */
+	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+		priv->cfg->eeprom_size =
+			OTP_BLOCK_SIZE * OTP_LOWER_BLOCKS_TOTAL;
+	sz = priv->cfg->eeprom_size;
 	priv->eeprom = kzalloc(sz, GFP_KERNEL);
 	if (!priv->eeprom) {
 		ret = -ENOMEM;
@@ -235,30 +293,77 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		ret = -ENOENT;
 		goto err;
 	}
-
-	/* eeprom is an array of 16bit values */
-	for (addr = 0; addr < sz; addr += sizeof(u16)) {
-		u32 r;
-
-		_iwl_write32(priv, CSR_EEPROM_REG,
-			     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
-		ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
-					  CSR_EEPROM_REG_READ_VALID_MSK,
-					  IWL_EEPROM_ACCESS_TIMEOUT);
-		if (ret < 0) {
-			IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
-			goto done;
+	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
+		ret = iwl_init_otp_access(priv);
+		if (ret) {
+			IWL_ERR(priv, "Failed to initialize OTP access.\n");
+			ret = -ENOENT;
+			goto err;
+		}
+		_iwl_write32(priv, CSR_EEPROM_GP,
+			     iwl_read32(priv, CSR_EEPROM_GP) &
+			     ~CSR_EEPROM_GP_IF_OWNER_MSK);
+		/* clear */
+		_iwl_write32(priv, CSR_OTP_GP_REG,
+			     iwl_read32(priv, CSR_OTP_GP_REG) |
+			     CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
+			     CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+
+		for (addr = 0; addr < sz; addr += sizeof(u16)) {
+			u32 r;
+
+			_iwl_write32(priv, CSR_EEPROM_REG,
+				     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+			ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+						  CSR_EEPROM_REG_READ_VALID_MSK,
+						  IWL_EEPROM_ACCESS_TIMEOUT);
+			if (ret < 0) {
+				IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+				goto done;
+			}
+			r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+			/* check for ECC errors: */
+			otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+			if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
+				/* stop in this case */
+				IWL_ERR(priv, "Uncorrectable OTP ECC error, Abort OTP read\n");
+				goto done;
+			}
+			if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
+				/* continue in this case */
+				_iwl_write32(priv, CSR_OTP_GP_REG,
+					     iwl_read32(priv, CSR_OTP_GP_REG) |
+					     CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
+				IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
+			}
+			e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
+		}
+	} else {
+		/* eeprom is an array of 16bit values */
+		for (addr = 0; addr < sz; addr += sizeof(u16)) {
+			u32 r;
+
+			_iwl_write32(priv, CSR_EEPROM_REG,
+				     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+			ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+						  CSR_EEPROM_REG_READ_VALID_MSK,
+						  IWL_EEPROM_ACCESS_TIMEOUT);
+			if (ret < 0) {
+				IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
+				goto done;
+			}
+			r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+			e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
 		}
-		r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
-		e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
 	}
 	ret = 0;
 done:
 	priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv);
 err:
 	if (ret)
-		kfree(priv->eeprom);
+		iwl_eeprom_free(priv);
 alloc_err:
 	return ret;
 }
@@ -285,7 +390,7 @@ int iwl_eeprom_check_version(struct iwl_priv *priv)
 
 	return 0;
 err:
-	IWL_ERR(priv, "Unsupported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
+	IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
 		  eeprom_ver, priv->cfg->eeprom_ver,
 		  calib_ver,  priv->cfg->eeprom_calib_ver);
 	return -EINVAL;
@@ -301,6 +406,8 @@ EXPORT_SYMBOL(iwl_eeprom_query_addr);
 
 u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
 {
+	if (!priv->eeprom)
+		return 0;
 	return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
 }
 EXPORT_SYMBOL(iwl_eeprom_query16);
@@ -481,8 +588,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 			/* First write that fat is not enabled, and then enable
 			 * one by one */
 			ch_info->fat_extension_channel =
-				(IEEE80211_CHAN_NO_FAT_ABOVE |
-				 IEEE80211_CHAN_NO_FAT_BELOW);
+				(IEEE80211_CHAN_NO_HT40PLUS |
+				 IEEE80211_CHAN_NO_HT40MINUS);
 
 			if (!(is_channel_valid(ch_info))) {
 				IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
@@ -561,7 +668,7 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 				fat_extension_chan = 0;
 			else
 				fat_extension_chan =
-					IEEE80211_CHAN_NO_FAT_BELOW;
+					IEEE80211_CHAN_NO_HT40MINUS;
 
 			/* Set up driver's info for lower half */
 			iwl_set_fat_chan_info(priv, ieeeband,
@@ -573,7 +680,7 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 			iwl_set_fat_chan_info(priv, ieeeband,
 						(eeprom_ch_index[ch] + 4),
 						&(eeprom_ch_info[ch]),
-						IEEE80211_CHAN_NO_FAT_ABOVE);
+						IEEE80211_CHAN_NO_HT40PLUS);
 		}
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 3479153d96c..195b4ef12c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -179,6 +179,10 @@ struct iwl_eeprom_channel {
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION	(0x21E)
 
+/* OTP */
+#define OTP_LOWER_BLOCKS_TOTAL		(3)
+#define OTP_BLOCK_SIZE			(0x400)
+
 /* 2.4 GHz */
 extern const u8 iwl_eeprom_band_1[14];
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 083ea1ffbe8..d30cb0275d1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -131,9 +131,23 @@ static inline void __iwl_set_bit(const char *f, u32 l,
 	IWL_DEBUG_IO(priv, "set_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
 	_iwl_write32(priv, reg, val);
 }
-#define iwl_set_bit(p, r, m) __iwl_set_bit(__FILE__, __LINE__, p, r, m)
+static inline void iwl_set_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	__iwl_set_bit(__FILE__, __LINE__, p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #else
-#define iwl_set_bit(p, r, m) _iwl_set_bit(p, r, m)
+static inline void iwl_set_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	_iwl_set_bit(p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #endif
 
 static inline void _iwl_clear_bit(struct iwl_priv *priv, u32 reg, u32 mask)
@@ -148,19 +162,30 @@ static inline void __iwl_clear_bit(const char *f, u32 l,
 	IWL_DEBUG_IO(priv, "clear_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
 	_iwl_write32(priv, reg, val);
 }
-#define iwl_clear_bit(p, r, m) __iwl_clear_bit(__FILE__, __LINE__, p, r, m)
+static inline void iwl_clear_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	__iwl_clear_bit(__FILE__, __LINE__, p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #else
-#define iwl_clear_bit(p, r, m) _iwl_clear_bit(p, r, m)
+static inline void iwl_clear_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	_iwl_clear_bit(p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #endif
 
 static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 {
 	int ret;
 	u32 val;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (atomic_read(&priv->restrict_refcnt))
-		return 0;
-#endif
+
 	/* this bit wakes up the NIC */
 	_iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 	ret = _iwl_poll_bit(priv, CSR_GP_CNTRL,
@@ -170,12 +195,10 @@ static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 	if (ret < 0) {
 		val = _iwl_read32(priv, CSR_GP_CNTRL);
 		IWL_ERR(priv, "MAC is in deep sleep!.  CSR_GP_CNTRL = 0x%08X\n", val);
+		_iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI);
 		return -EIO;
 	}
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-	atomic_inc(&priv->restrict_refcnt);
-#endif
 	return 0;
 }
 
@@ -183,9 +206,6 @@ static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 static inline int __iwl_grab_nic_access(const char *f, u32 l,
 					       struct iwl_priv *priv)
 {
-	if (atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Grabbing access while already held %s %d.\n", f, l);
-
 	IWL_DEBUG_IO(priv, "grabbing nic access - %s %d\n", f, l);
 	return _iwl_grab_nic_access(priv);
 }
@@ -198,18 +218,13 @@ static inline int __iwl_grab_nic_access(const char *f, u32 l,
 
 static inline void _iwl_release_nic_access(struct iwl_priv *priv)
 {
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (atomic_dec_and_test(&priv->restrict_refcnt))
-#endif
-		_iwl_clear_bit(priv, CSR_GP_CNTRL,
-			       CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+	_iwl_clear_bit(priv, CSR_GP_CNTRL,
+			CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 }
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline void __iwl_release_nic_access(const char *f, u32 l,
 					    struct iwl_priv *priv)
 {
-	if (atomic_read(&priv->restrict_refcnt) <= 0)
-		IWL_ERR(priv, "Release unheld nic access at line %s %d.\n", f, l);
 
 	IWL_DEBUG_IO(priv, "releasing nic access - %s %d\n", f, l);
 	_iwl_release_nic_access(priv);
@@ -230,16 +245,37 @@ static inline u32 __iwl_read_direct32(const char *f, u32 l,
 					struct iwl_priv *priv, u32 reg)
 {
 	u32 value = _iwl_read_direct32(priv, reg);
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s %d\n", f, l);
 	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
 		     f, l);
 	return value;
 }
-#define iwl_read_direct32(priv, reg) \
-	__iwl_read_direct32(__FILE__, __LINE__, priv, reg)
+static inline u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
+{
+	u32 value;
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	value = __iwl_read_direct32(__FILE__, __LINE__, priv, reg);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return value;
+}
+
 #else
-#define iwl_read_direct32 _iwl_read_direct32
+static inline u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
+{
+	u32 value;
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	value = _iwl_read_direct32(priv, reg);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return value;
+
+}
 #endif
 
 static inline void _iwl_write_direct32(struct iwl_priv *priv,
@@ -247,19 +283,17 @@ static inline void _iwl_write_direct32(struct iwl_priv *priv,
 {
 	_iwl_write32(priv, reg, value);
 }
-#ifdef CONFIG_IWLWIFI_DEBUG
-static void __iwl_write_direct32(const char *f , u32 line,
-				   struct iwl_priv *priv, u32 reg, u32 value)
+static inline void iwl_write_direct32(struct iwl_priv *priv, u32 reg, u32 value)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
-	_iwl_write_direct32(priv, reg, value);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_direct32(priv, reg, value);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
-#define iwl_write_direct32(priv, reg, value) \
-	__iwl_write_direct32(__func__, __LINE__, priv, reg, value)
-#else
-#define iwl_write_direct32 _iwl_write_direct32
-#endif
 
 static inline void iwl_write_reg_buf(struct iwl_priv *priv,
 					       u32 reg, u32 len, u32 *values)
@@ -268,14 +302,23 @@ static inline void iwl_write_reg_buf(struct iwl_priv *priv,
 
 	if ((priv != NULL) && (values != NULL)) {
 		for (; 0 < len; len -= count, reg += count, values++)
-			_iwl_write_direct32(priv, reg, *values);
+			iwl_write_direct32(priv, reg, *values);
 	}
 }
 
 static inline int _iwl_poll_direct_bit(struct iwl_priv *priv, u32 addr,
 				       u32 mask, int timeout)
 {
-	return _iwl_poll_bit(priv, addr, mask, mask, timeout);
+	int t = 0;
+
+	do {
+		if ((iwl_read_direct32(priv, addr) & mask) == mask)
+			return t;
+		udelay(IWL_POLL_INTERVAL);
+		t += IWL_POLL_INTERVAL;
+	} while (t < timeout);
+
+	return -ETIMEDOUT;
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -305,20 +348,18 @@ static inline u32 _iwl_read_prph(struct iwl_priv *priv, u32 reg)
 	rmb();
 	return _iwl_read_direct32(priv, HBUS_TARG_PRPH_RDAT);
 }
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline u32 __iwl_read_prph(const char *f, u32 line,
-				  struct iwl_priv *priv, u32 reg)
+static inline u32 iwl_read_prph(struct iwl_priv *priv, u32 reg)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
-	return _iwl_read_prph(priv, reg);
-}
+	unsigned long reg_flags;
+	u32 val;
 
-#define iwl_read_prph(priv, reg) \
-	__iwl_read_prph(__func__, __LINE__, priv, reg)
-#else
-#define iwl_read_prph _iwl_read_prph
-#endif
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	val = _iwl_read_prph(priv, reg);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return val;
+}
 
 static inline void _iwl_write_prph(struct iwl_priv *priv,
 					     u32 addr, u32 val)
@@ -328,83 +369,107 @@ static inline void _iwl_write_prph(struct iwl_priv *priv,
 	wmb();
 	_iwl_write_direct32(priv, HBUS_TARG_PRPH_WDAT, val);
 }
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_write_prph(const char *f, u32 line,
-				    struct iwl_priv *priv, u32 addr, u32 val)
+
+static inline void iwl_write_prph(struct iwl_priv *priv, u32 addr, u32 val)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
-	_iwl_write_prph(priv, addr, val);
-}
+	unsigned long reg_flags;
 
-#define iwl_write_prph(priv, addr, val) \
-	__iwl_write_prph(__func__, __LINE__, priv, addr, val);
-#else
-#define iwl_write_prph _iwl_write_prph
-#endif
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_prph(priv, addr, val);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+}
 
 #define _iwl_set_bits_prph(priv, reg, mask) \
 	_iwl_write_prph(priv, reg, (_iwl_read_prph(priv, reg) | mask))
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_set_bits_prph(const char *f, u32 line,
-				       struct iwl_priv *priv,
-				       u32 reg, u32 mask)
+
+static inline void iwl_set_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
+	unsigned long reg_flags;
 
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
 	_iwl_set_bits_prph(priv, reg, mask);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
-#define iwl_set_bits_prph(priv, reg, mask) \
-	__iwl_set_bits_prph(__func__, __LINE__, priv, reg, mask)
-#else
-#define iwl_set_bits_prph _iwl_set_bits_prph
-#endif
 
 #define _iwl_set_bits_mask_prph(priv, reg, bits, mask) \
 	_iwl_write_prph(priv, reg, ((_iwl_read_prph(priv, reg) & mask) | bits))
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_set_bits_mask_prph(const char *f, u32 line,
-		struct iwl_priv *priv, u32 reg, u32 bits, u32 mask)
+static inline void iwl_set_bits_mask_prph(struct iwl_priv *priv, u32 reg,
+				u32 bits, u32 mask)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
 	_iwl_set_bits_mask_prph(priv, reg, bits, mask);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
-#define iwl_set_bits_mask_prph(priv, reg, bits, mask) \
-	__iwl_set_bits_mask_prph(__func__, __LINE__, priv, reg, bits, mask)
-#else
-#define iwl_set_bits_mask_prph _iwl_set_bits_mask_prph
-#endif
 
 static inline void iwl_clear_bits_prph(struct iwl_priv
 						 *priv, u32 reg, u32 mask)
 {
-	u32 val = _iwl_read_prph(priv, reg);
+	unsigned long reg_flags;
+	u32 val;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	val = _iwl_read_prph(priv, reg);
 	_iwl_write_prph(priv, reg, (val & ~mask));
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 
 static inline u32 iwl_read_targ_mem(struct iwl_priv *priv, u32 addr)
 {
-	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, addr);
+	unsigned long reg_flags;
+	u32 value;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+
+	_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, addr);
 	rmb();
-	return iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+	value = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return value;
 }
 
 static inline void iwl_write_targ_mem(struct iwl_priv *priv, u32 addr, u32 val)
 {
-	iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
-	wmb();
-	iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, val);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
+		wmb();
+		_iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, val);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 
 static inline void iwl_write_targ_mem_buf(struct iwl_priv *priv, u32 addr,
 					  u32 len, u32 *values)
 {
-	iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
-	wmb();
-	for (; 0 < len; len -= sizeof(u32), values++)
-		iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, *values);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
+		wmb();
+		for (; 0 < len; len -= sizeof(u32), values++)
+			_iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, *values);
+
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 19680f72087..5e64252f80f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -176,10 +176,6 @@ static int iwl_led_associate(struct iwl_priv *priv, int led_id)
 static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
 {
 	priv->allow_blinking = 0;
-	if (iwl_is_rfkill(priv))
-		iwl4965_led_off_reg(priv, led_id);
-	else
-		iwl4965_led_on_reg(priv, led_id);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 47c894530eb..f2ea3f05f6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -41,38 +41,33 @@
 #include "iwl-power.h"
 
 /*
- * Setting power level allow the card to go to sleep when not busy
- * there are three factor that decide the power level to go to, they
- * are list here with its priority
- *  1- critical_power_setting this will be set according to card temperature.
- *  2- system_power_setting this will be set by system PM manager.
- *  3- user_power_setting this will be set by user either by writing to sys or
- *  	mac80211
+ * Setting power level allow the card to go to sleep when not busy.
  *
- * if system_power_setting and user_power_setting is set to auto
- * the power level will be decided according to association status and battery
- * status.
+ * The power level is set to INDEX_1 (the least deep state) by
+ * default, and will, in the future, be the deepest state unless
+ * otherwise required by pm_qos network latency requirements.
  *
+ * Using INDEX_1 without pm_qos is ok because mac80211 will disable
+ * PS when even checking every beacon for the TIM bit would exceed
+ * the required latency.
  */
 
-#define MSEC_TO_USEC 1024
 #define IWL_POWER_RANGE_0_MAX  (2)
 #define IWL_POWER_RANGE_1_MAX  (10)
 
 
-
-#define IWL_POWER_ON_BATTERY		IWL_POWER_INDEX_5
-#define IWL_POWER_ON_AC_DISASSOC	IWL_POWER_MODE_CAM
-#define IWL_POWER_ON_AC_ASSOC		IWL_POWER_MODE_CAM
-
-
-#define IWL_CT_KILL_TEMPERATURE		110
-#define IWL_MIN_POWER_TEMPERATURE	100
-#define IWL_REDUCED_POWER_TEMPERATURE	95
-
+#define NOSLP cpu_to_le16(0), 0, 0
+#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
+#define TU_TO_USEC 1024
+#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
+#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
+				     cpu_to_le32(X1), \
+				     cpu_to_le32(X2), \
+				     cpu_to_le32(X3), \
+				     cpu_to_le32(X4)}
 /* default power management (not Tx power) table values */
-/* for TIM  0-10 */
-static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
+/* for DTIM period 0 through IWL_POWER_RANGE_0_MAX */
+static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
@@ -82,8 +77,8 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
 };
 
 
-/* for TIM = 3-10 */
-static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
+/* for DTIM period IWL_POWER_RANGE_0_MAX + 1 through IWL_POWER_RANGE_1_MAX */
+static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
@@ -92,8 +87,8 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
 };
 
-/* for TIM > 11 */
-static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
+/* for DTIM period > IWL_POWER_RANGE_1_MAX */
+static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
@@ -106,39 +101,15 @@ static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
 /* set card power command */
 static int iwl_set_power(struct iwl_priv *priv, void *cmd)
 {
-	return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
-				      sizeof(struct iwl_powertable_cmd),
-				      cmd, NULL);
-}
-/* decide the right power level according to association status
- * and battery status
- */
-static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
-{
-	u16 mode;
-
-	switch (priv->power_data.user_power_setting) {
-	case IWL_POWER_AUTO:
-		/* if running on battery */
-		if (priv->power_data.is_battery_active)
-			mode = IWL_POWER_ON_BATTERY;
-		else if (iwl_is_associated(priv))
-			mode = IWL_POWER_ON_AC_ASSOC;
-		else
-			mode = IWL_POWER_ON_AC_DISASSOC;
-		break;
-	default:
-		mode = priv->power_data.user_power_setting;
-		break;
-	}
-	return mode;
+	return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
+				sizeof(struct iwl_powertable_cmd), cmd);
 }
 
 /* initialize to default */
 static void iwl_power_init_handle(struct iwl_priv *priv)
 {
 	struct iwl_power_mgr *pow_data;
-	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
+	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_NUM;
 	struct iwl_powertable_cmd *cmd;
 	int i;
 	u16 lctl;
@@ -157,7 +128,7 @@ static void iwl_power_init_handle(struct iwl_priv *priv)
 
 	IWL_DEBUG_POWER(priv, "adjust power command flags\n");
 
-	for (i = 0; i < IWL_POWER_MAX; i++) {
+	for (i = 0; i < IWL_POWER_NUM; i++) {
 		cmd = &pow_data->pwr_range_0[i].cmd;
 
 		if (lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
@@ -247,33 +218,12 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
 			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
 
-	/* If on battery, set to 3,
-	 * if plugged into AC power, set to CAM ("continuously aware mode"),
-	 * else user level */
-
-	switch (setting->system_power_setting) {
-	case IWL_POWER_SYS_AUTO:
-		final_mode = iwl_get_auto_power_mode(priv);
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		final_mode = IWL_POWER_INDEX_3;
-		break;
-	case IWL_POWER_SYS_AC:
-		final_mode = IWL_POWER_MODE_CAM;
-		break;
-	default:
-		final_mode = IWL_POWER_INDEX_3;
-		WARN_ON(1);
-	}
-
-	if (setting->critical_power_setting > final_mode)
-		final_mode = setting->critical_power_setting;
+	final_mode = priv->power_data.user_power_setting;
 
-	/* driver only support CAM for non STA network */
-	if (priv->iw_mode != NL80211_IFTYPE_STATION)
+	if (setting->power_disabled)
 		final_mode = IWL_POWER_MODE_CAM;
 
-	if (iwl_is_ready_rf(priv) && !setting->power_disabled &&
+	if (iwl_is_ready_rf(priv) &&
 	    ((setting->power_mode != final_mode) || force)) {
 		struct iwl_powertable_cmd cmd;
 
@@ -290,8 +240,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 
 		if (final_mode == IWL_POWER_MODE_CAM)
 			clear_bit(STATUS_POWER_PMI, &priv->status);
-		else
-			set_bit(STATUS_POWER_PMI, &priv->status);
 
 		if (priv->cfg->ops->lib->update_chain_flags && update_chains)
 			priv->cfg->ops->lib->update_chain_flags(priv);
@@ -307,51 +255,10 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 }
 EXPORT_SYMBOL(iwl_power_update_mode);
 
-/* Allow other iwl code to disable/enable power management active
- * this will be useful for rate scale to disable PM during heavy
- * Tx/Rx activities
- */
-int iwl_power_disable_management(struct iwl_priv *priv, u32 ms)
-{
-	u16 prev_mode;
-	int ret = 0;
-
-	if (priv->power_data.power_disabled)
-		return -EBUSY;
-
-	prev_mode = priv->power_data.user_power_setting;
-	priv->power_data.user_power_setting = IWL_POWER_MODE_CAM;
-	ret = iwl_power_update_mode(priv, 0);
-	priv->power_data.power_disabled = 1;
-	priv->power_data.user_power_setting = prev_mode;
-	cancel_delayed_work(&priv->set_power_save);
-	if (ms)
-		queue_delayed_work(priv->workqueue, &priv->set_power_save,
-				   msecs_to_jiffies(ms));
-
-
-	return ret;
-}
-EXPORT_SYMBOL(iwl_power_disable_management);
-
-/* Allow other iwl code to disable/enable power management active
- * this will be useful for rate scale to disable PM during high
- * volume activities
- */
-int iwl_power_enable_management(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	priv->power_data.power_disabled = 0;
-	ret = iwl_power_update_mode(priv, 0);
-	return ret;
-}
-EXPORT_SYMBOL(iwl_power_enable_management);
-
 /* set user_power_setting */
 int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
 {
-	if (mode > IWL_POWER_MAX)
+	if (mode >= IWL_POWER_NUM)
 		return -EINVAL;
 
 	priv->power_data.user_power_setting = mode;
@@ -360,86 +267,12 @@ int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
 }
 EXPORT_SYMBOL(iwl_power_set_user_mode);
 
-/* set system_power_setting. This should be set by over all
- * PM application.
- */
-int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode)
-{
-	if (mode < IWL_POWER_SYS_MAX)
-		priv->power_data.system_power_setting = mode;
-	else
-		return -EINVAL;
-	return iwl_power_update_mode(priv, 0);
-}
-EXPORT_SYMBOL(iwl_power_set_system_mode);
-
 /* initialize to default */
 void iwl_power_initialize(struct iwl_priv *priv)
 {
 	iwl_power_init_handle(priv);
-	priv->power_data.user_power_setting = IWL_POWER_AUTO;
-	priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO;
-	priv->power_data.power_disabled = 0;
-	priv->power_data.is_battery_active = 0;
-	priv->power_data.critical_power_setting = 0;
+	priv->power_data.user_power_setting = IWL_POWER_INDEX_1;
+	/* default to disabled until mac80211 says otherwise */
+	priv->power_data.power_disabled = 1;
 }
 EXPORT_SYMBOL(iwl_power_initialize);
-
-/* set critical_power_setting according to temperature value */
-int iwl_power_temperature_change(struct iwl_priv *priv)
-{
-	int ret = 0;
-	s32 temperature = KELVIN_TO_CELSIUS(priv->last_temperature);
-	u16 new_critical = priv->power_data.critical_power_setting;
-
-	if (temperature > IWL_CT_KILL_TEMPERATURE)
-		return 0;
-	else if (temperature > IWL_MIN_POWER_TEMPERATURE)
-		new_critical = IWL_POWER_INDEX_5;
-	else if (temperature > IWL_REDUCED_POWER_TEMPERATURE)
-		new_critical = IWL_POWER_INDEX_3;
-	else
-		new_critical = IWL_POWER_MODE_CAM;
-
-	if (new_critical != priv->power_data.critical_power_setting)
-		priv->power_data.critical_power_setting = new_critical;
-
-	if (priv->power_data.critical_power_setting >
-				priv->power_data.power_mode)
-		ret = iwl_power_update_mode(priv, 0);
-
-	return ret;
-}
-EXPORT_SYMBOL(iwl_power_temperature_change);
-
-static void iwl_bg_set_power_save(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work,
-				struct iwl_priv, set_power_save.work);
-	IWL_DEBUG_POWER(priv, "update power\n");
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-
-	/* on starting association we disable power management
-	 * until association, if association failed then this
-	 * timer will expire and enable PM again.
-	 */
-	if (!iwl_is_associated(priv))
-		iwl_power_enable_management(priv);
-
-	mutex_unlock(&priv->mutex);
-}
-void iwl_setup_power_deferred_work(struct iwl_priv *priv)
-{
-	INIT_DELAYED_WORK(&priv->set_power_save, iwl_bg_set_power_save);
-}
-EXPORT_SYMBOL(iwl_setup_power_deferred_work);
-
-void iwl_power_cancel_timeout(struct iwl_priv *priv)
-{
-	cancel_delayed_work(&priv->set_power_save);
-}
-EXPORT_SYMBOL(iwl_power_cancel_timeout);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 18963392121..37ba3bb7a25 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -40,56 +40,29 @@ enum {
 	IWL_POWER_INDEX_3,
 	IWL_POWER_INDEX_4,
 	IWL_POWER_INDEX_5,
-	IWL_POWER_AUTO,
-	IWL_POWER_MAX = IWL_POWER_AUTO,
+	IWL_POWER_NUM
 };
 
-enum {
-	IWL_POWER_SYS_AUTO,
-	IWL_POWER_SYS_AC,
-	IWL_POWER_SYS_BATTERY,
-	IWL_POWER_SYS_MAX,
-};
-
-
 /* Power management (not Tx power) structures */
 
-#define NOSLP cpu_to_le16(0), 0, 0
-#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
-#define SLP_TOUT(T) cpu_to_le32((T) * MSEC_TO_USEC)
-#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
-				     cpu_to_le32(X1), \
-				     cpu_to_le32(X2), \
-				     cpu_to_le32(X3), \
-				     cpu_to_le32(X4)}
 struct iwl_power_vec_entry {
 	struct iwl_powertable_cmd cmd;
 	u8 no_dtim;
 };
 
 struct iwl_power_mgr {
-	spinlock_t lock;
-	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX];
-	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX];
-	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX];
+	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_NUM];
+	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_NUM];
+	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_NUM];
 	u32 dtim_period;
 	/* final power level that used to calculate final power command */
 	u8 power_mode;
-	u8 user_power_setting; /* set by user through mac80211 or sysfs */
-	u8 system_power_setting; /* set by kernel system tools */
-	u8 critical_power_setting; /* set if driver over heated */
-	u8 is_battery_active; /* DC/AC power */
-	u8 power_disabled; /* flag to disable using power saving level */
+	u8 user_power_setting; /* set by user through sysfs */
+	u8 power_disabled; /* set by mac80211's CONF_PS */
 };
 
-void iwl_setup_power_deferred_work(struct iwl_priv *priv);
-void iwl_power_cancel_timeout(struct iwl_priv *priv);
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
-int iwl_power_disable_management(struct iwl_priv *priv, u32 ms);
-int iwl_power_enable_management(struct iwl_priv *priv);
 int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode);
-int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode);
 void iwl_power_initialize(struct iwl_priv *priv);
-int iwl_power_temperature_change(struct iwl_priv *priv);
 
 #endif  /* __iwl_power_setting_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
deleted file mode 100644
index 2ad9faf1508..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-
-/* software rf-kill from user */
-static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state)
-{
-	struct iwl_priv *priv = data;
-	int err = 0;
-
-	if (!priv->rfkill)
-		return 0;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return 0;
-
-	IWL_DEBUG_RF_KILL(priv, "we received soft RFKILL set to state %d\n", state);
-	mutex_lock(&priv->mutex);
-
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (iwl_is_rfkill_hw(priv)) {
-			err = -EBUSY;
-			goto out_unlock;
-		}
-		iwl_radio_kill_sw_enable_radio(priv);
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		iwl_radio_kill_sw_disable_radio(priv);
-		break;
-	default:
-		IWL_WARN(priv, "we received unexpected RFKILL state %d\n",
-			state);
-		break;
-	}
-out_unlock:
-	mutex_unlock(&priv->mutex);
-
-	return err;
-}
-
-int iwl_rfkill_init(struct iwl_priv *priv)
-{
-	struct device *device = wiphy_dev(priv->hw->wiphy);
-	int ret = 0;
-
-	BUG_ON(device == NULL);
-
-	IWL_DEBUG_RF_KILL(priv, "Initializing RFKILL.\n");
-	priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
-	if (!priv->rfkill) {
-		IWL_ERR(priv, "Unable to allocate RFKILL device.\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	priv->rfkill->name = priv->cfg->name;
-	priv->rfkill->data = priv;
-	priv->rfkill->state = RFKILL_STATE_UNBLOCKED;
-	priv->rfkill->toggle_radio = iwl_rfkill_soft_rf_kill;
-	priv->rfkill->user_claim_unsupported = 1;
-
-	priv->rfkill->dev.class->suspend = NULL;
-	priv->rfkill->dev.class->resume = NULL;
-
-	ret = rfkill_register(priv->rfkill);
-	if (ret) {
-		IWL_ERR(priv, "Unable to register RFKILL: %d\n", ret);
-		goto free_rfkill;
-	}
-
-	IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n");
-	return ret;
-
-free_rfkill:
-	if (priv->rfkill != NULL)
-		rfkill_free(priv->rfkill);
-	priv->rfkill = NULL;
-
-error:
-	IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n");
-	return ret;
-}
-EXPORT_SYMBOL(iwl_rfkill_init);
-
-void iwl_rfkill_unregister(struct iwl_priv *priv)
-{
-
-	if (priv->rfkill)
-		rfkill_unregister(priv->rfkill);
-
-	priv->rfkill = NULL;
-}
-EXPORT_SYMBOL(iwl_rfkill_unregister);
-
-/* set RFKILL to the right state. */
-void iwl_rfkill_set_hw_state(struct iwl_priv *priv)
-{
-	if (!priv->rfkill)
-		return;
-
-	if (iwl_is_rfkill_hw(priv)) {
-		rfkill_force_state(priv->rfkill, RFKILL_STATE_HARD_BLOCKED);
-		return;
-	}
-
-	if (!iwl_is_rfkill_sw(priv))
-		rfkill_force_state(priv->rfkill, RFKILL_STATE_UNBLOCKED);
-	else
-		rfkill_force_state(priv->rfkill, RFKILL_STATE_SOFT_BLOCKED);
-}
-EXPORT_SYMBOL(iwl_rfkill_set_hw_state);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.h b/drivers/net/wireless/iwlwifi/iwl-rfkill.h
deleted file mode 100644
index 633dafb4bf1..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-#ifndef __iwl_rf_kill_h__
-#define __iwl_rf_kill_h__
-
-struct iwl_priv;
-
-#include <linux/rfkill.h>
-
-#ifdef CONFIG_IWLWIFI_RFKILL
-
-void iwl_rfkill_set_hw_state(struct iwl_priv *priv);
-void iwl_rfkill_unregister(struct iwl_priv *priv);
-int iwl_rfkill_init(struct iwl_priv *priv);
-#else
-static inline void iwl_rfkill_set_hw_state(struct iwl_priv *priv) {}
-static inline void iwl_rfkill_unregister(struct iwl_priv *priv) {}
-static inline int iwl_rfkill_init(struct iwl_priv *priv) { return 0; }
-#endif
-
-
-
-#endif  /* __iwl_rf_kill_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 8f65908f66f..2b8d40b37a1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -145,18 +145,14 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
 			goto exit_unlock;
 		}
 
-		ret = iwl_grab_nic_access(priv);
-		if (ret)
-			goto exit_unlock;
-
-		/* Device expects a multiple of 8 */
-		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write & ~0x7);
-		iwl_release_nic_access(priv);
+		q->write_actual = (q->write & ~0x7);
+		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
 
 	/* Else device is assumed to be awake */
 	} else {
 		/* Device expects a multiple of 8 */
-		iwl_write32(priv, rx_wrt_ptr_reg, q->write & ~0x7);
+		q->write_actual = (q->write & ~0x7);
+		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
 	}
 
 	q->need_update = 0;
@@ -218,7 +214,7 @@ int iwl_rx_queue_restock(struct iwl_priv *priv)
 
 	/* If we've added more space for the firmware to place data, tell it.
 	 * Increment device's write pointer in multiples of 8. */
-	if (write != (rxq->write & ~0x7)) {
+	if (rxq->write_actual != (rxq->write & ~0x7)) {
 		spin_lock_irqsave(&rxq->lock, flags);
 		rxq->need_update = 1;
 		spin_unlock_irqrestore(&rxq->lock, flags);
@@ -238,7 +234,7 @@ EXPORT_SYMBOL(iwl_rx_queue_restock);
  * Also restock the Rx queue via iwl_rx_queue_restock.
  * This is called as a scheduled work item (except for during initialization)
  */
-void iwl_rx_allocate(struct iwl_priv *priv)
+void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
@@ -260,7 +256,8 @@ void iwl_rx_allocate(struct iwl_priv *priv)
 
 		/* Alloc a new receive buffer */
 		rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
-				     GFP_KERNEL);
+						priority);
+
 		if (!rxb->skb) {
 			IWL_CRIT(priv, "Can not allocate SKB buffers\n");
 			/* We don't reschedule replenish work here -- we will
@@ -295,7 +292,7 @@ void iwl_rx_replenish(struct iwl_priv *priv)
 {
 	unsigned long flags;
 
-	iwl_rx_allocate(priv);
+	iwl_rx_allocate(priv, GFP_KERNEL);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_rx_queue_restock(priv);
@@ -303,6 +300,14 @@ void iwl_rx_replenish(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_rx_replenish);
 
+void iwl_rx_replenish_now(struct iwl_priv *priv)
+{
+	iwl_rx_allocate(priv, GFP_ATOMIC);
+
+	iwl_rx_queue_restock(priv);
+}
+EXPORT_SYMBOL(iwl_rx_replenish_now);
+
 
 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
@@ -358,6 +363,7 @@ int iwl_rx_queue_alloc(struct iwl_priv *priv)
 	/* Set us so that we have processed and used all buffers, but have
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
 	rxq->free_count = 0;
 	rxq->need_update = 0;
 	return 0;
@@ -396,6 +402,7 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	/* Set us so that we have processed and used all buffers, but have
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
 	rxq->free_count = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
@@ -403,18 +410,12 @@ EXPORT_SYMBOL(iwl_rx_queue_reset);
 
 int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 {
-	int ret;
-	unsigned long flags;
 	u32 rb_size;
 	const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
-	const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */
+	u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
+	if (!priv->cfg->use_isr_legacy)
+		rb_timeout = RX_RB_TIMEOUT;
 
 	if (priv->cfg->mod_params->amsdu_size_8K)
 		rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
@@ -452,35 +453,19 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 			   (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 			   (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 
-	iwl_release_nic_access(priv);
-
 	iwl_write32(priv, CSR_INT_COALESCING, 0x40);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
 int iwl_rxq_stop(struct iwl_priv *priv)
 {
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (unlikely(ret)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
 
 	/* stop Rx DMA */
 	iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 	iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
 			    FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 EXPORT_SYMBOL(iwl_rxq_stop);
@@ -582,8 +567,8 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 
 	iwl_leds_background(priv);
 
-	if (priv->cfg->ops->lib->temperature && change)
-		priv->cfg->ops->lib->temperature(priv);
+	if (priv->cfg->ops->lib->temp_ops.temperature && change)
+		priv->cfg->ops->lib->temp_ops.temperature(priv);
 }
 EXPORT_SYMBOL(iwl_rx_statistics);
 
@@ -1102,13 +1087,6 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 		rx_status.flag |= RX_FLAG_SHORTPRE;
 
-	/* Take shortcut when only in monitor mode */
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		iwl_pass_packet_to_mac80211(priv, include_phy,
-						 rxb, &rx_status);
-		return;
-	}
-
 	network_packet = iwl_is_network_packet(priv, header);
 	if (network_packet) {
 		priv->last_rx_rssi = rx_status.signal;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 6330b91e37c..e26875dbe85 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -445,13 +445,6 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 	unsigned long flags;
 	struct iwl_priv *priv = hw->priv;
 	int ret;
-	u8 *ssid = NULL;
-	size_t ssid_len = 0;
-
-	if (req->n_ssids) {
-		ssid = req->ssids[0].ssid;
-		ssid_len = req->ssids[0].ssid_len;
-	}
 
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
@@ -485,13 +478,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 		goto out_unlock;
 	}
 
-	if (ssid_len) {
-		priv->one_direct_scan = 1;
-		priv->direct_ssid_len =  ssid_len;
-		memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
-	} else {
-		priv->one_direct_scan = 0;
-	}
+	priv->scan_request = req;
 
 	ret = iwl_scan_initiate(priv);
 
@@ -530,73 +517,14 @@ void iwl_bg_scan_check(struct work_struct *data)
 EXPORT_SYMBOL(iwl_bg_scan_check);
 
 /**
- * iwl_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
-				    u16 basic_rate, int *left)
-{
-	u16 ret_rates = 0, bit;
-	int i;
-	u8 *cnt = ie;
-	u8 *rates = ie + 1;
-
-	for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
-		if (bit & supported_rate) {
-			ret_rates |= bit;
-			rates[*cnt] = iwl_rates[i].ieee |
-				((bit & basic_rate) ? 0x80 : 0x00);
-			(*cnt)++;
-			(*left)--;
-			if ((*left <= 0) ||
-			    (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
-				break;
-		}
-	}
-
-	return ret_rates;
-}
-
-
-static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
-			     u8 *pos, int *left)
-{
-	struct ieee80211_ht_cap *ht_cap;
-
-	if (!sband || !sband->ht_cap.ht_supported)
-		return;
-
-	if (*left < sizeof(struct ieee80211_ht_cap))
-		return;
-
-	*pos++ = sizeof(struct ieee80211_ht_cap);
-	ht_cap = (struct ieee80211_ht_cap *) pos;
-
-	ht_cap->cap_info = cpu_to_le16(sband->ht_cap.cap);
-	memcpy(&ht_cap->mcs, &sband->ht_cap.mcs, 16);
-	ht_cap->ampdu_params_info =
-		(sband->ht_cap.ampdu_factor & IEEE80211_HT_AMPDU_PARM_FACTOR) |
-		((sband->ht_cap.ampdu_density << 2) &
-			IEEE80211_HT_AMPDU_PARM_DENSITY);
-	*left -= sizeof(struct ieee80211_ht_cap);
-}
-
-/**
  * iwl_fill_probe_req - fill in all required fields and IE for probe request
  */
 
-u16 iwl_fill_probe_req(struct iwl_priv *priv,
-		       enum ieee80211_band band,
-		       struct ieee80211_mgmt *frame,
-		       int left)
+u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
+		       const u8 *ies, int ie_len, int left)
 {
 	int len = 0;
 	u8 *pos = NULL;
-	u16 active_rates, ret_rates, cck_rates, active_rate_basic;
-	const struct ieee80211_supported_band *sband =
-						iwl_get_hw_mode(priv, band);
-
 
 	/* Make sure there is enough space for the probe request,
 	 * two mandatory IEs and the data */
@@ -624,62 +552,12 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv,
 
 	len += 2;
 
-	/* fill in supported rate */
-	left -= 2;
-	if (left < 0)
-		return 0;
-
-	*pos++ = WLAN_EID_SUPP_RATES;
-	*pos = 0;
-
-	/* exclude 60M rate */
-	active_rates = priv->rates_mask;
-	active_rates &= ~IWL_RATE_60M_MASK;
-
-	active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
-
-	cck_rates = IWL_CCK_RATES_MASK & active_rates;
-	ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
-					     active_rate_basic, &left);
-	active_rates &= ~ret_rates;
-
-	ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
-					     active_rate_basic, &left);
-	active_rates &= ~ret_rates;
-
-	len += 2 + *pos;
-	pos += (*pos) + 1;
+	if (WARN_ON(left < ie_len))
+		return len;
 
-	if (active_rates == 0)
-		goto fill_end;
-
-	/* fill in supported extended rate */
-	/* ...next IE... */
-	left -= 2;
-	if (left < 0)
-		return 0;
-	/* ... fill it in... */
-	*pos++ = WLAN_EID_EXT_SUPP_RATES;
-	*pos = 0;
-	iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left);
-	if (*pos > 0) {
-		len += 2 + *pos;
-		pos += (*pos) + 1;
-	} else {
-		pos--;
-	}
-
- fill_end:
-
-	left -= 2;
-	if (left < 0)
-		return 0;
-
-	*pos++ = WLAN_EID_HT_CAPABILITY;
-	*pos = 0;
-	iwl_ht_cap_to_ie(sband, pos, &left);
-	if (*pos > 0)
-		len += 2 + *pos;
+	memcpy(pos, ies, ie_len);
+	len += ie_len;
+	left -= ie_len;
 
 	return (u16)len;
 }
@@ -699,11 +577,13 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	int ret = 0;
 	u32 rate_flags = 0;
 	u16 cmd_len;
+	u16 rx_chain = 0;
 	enum ieee80211_band band;
-	u8 n_probes = 2;
-	u8 rx_chain = priv->hw_params.valid_rx_ant;
+	u8 n_probes = 0;
+	u8 rx_ant = priv->hw_params.valid_rx_ant;
 	u8 rate;
-	DECLARE_SSID_BUF(ssid);
+	bool is_active = false;
+	int  chan_mod;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -795,19 +675,25 @@ static void iwl_bg_request_scan(struct work_struct *data)
 			       scan_suspend_time, interval);
 	}
 
-	/* We should add the ability for user to lock to PASSIVE ONLY */
-	if (priv->one_direct_scan) {
-		IWL_DEBUG_SCAN(priv, "Start direct scan for '%s'\n",
-				print_ssid(ssid, priv->direct_ssid,
-					   priv->direct_ssid_len));
-		scan->direct_scan[0].id = WLAN_EID_SSID;
-		scan->direct_scan[0].len = priv->direct_ssid_len;
-		memcpy(scan->direct_scan[0].ssid,
-		       priv->direct_ssid, priv->direct_ssid_len);
-		n_probes++;
-	} else {
-		IWL_DEBUG_SCAN(priv, "Start indirect scan.\n");
-	}
+	if (priv->scan_request->n_ssids) {
+		int i, p = 0;
+		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
+		}
+		is_active = true;
+	} else
+		IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
 
 	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
 	scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
@@ -817,7 +703,9 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		band = IEEE80211_BAND_2GHZ;
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
-		if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) {
+		chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
+				       >> RXON_FLG_CHANNEL_MODE_POS;
+		if (chan_mod == CHANNEL_MODE_PURE_40) {
 			rate = IWL_RATE_6M_PLCP;
 		} else {
 			rate = IWL_RATE_1M_PLCP;
@@ -827,13 +715,18 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		band = IEEE80211_BAND_5GHZ;
 		rate = IWL_RATE_6M_PLCP;
-		scan->good_CRC_th = IWL_GOOD_CRC_TH;
+		/*
+		 * If active scaning is requested but a certain channel
+		 * is marked passive, we can do active scanning if we
+		 * detect transmissions.
+		 */
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
 
 		/* Force use of chains B and C (0x6) for scan Rx for 4965
 		 * Avoid A (0x1) because of its off-channel reception on A-band.
 		 */
 		if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
-			rx_chain = 0x6;
+			rx_ant = ANT_BC;
 	} else {
 		IWL_WARN(priv, "Invalid scan band count\n");
 		goto done;
@@ -845,26 +738,27 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
 
 	/* MIMO is not used here, but value is required */
-	scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
-				cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
-				(rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
-				(0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
-
-	cmd_len = iwl_fill_probe_req(priv, band,
-				     (struct ieee80211_mgmt *)scan->data,
-				     IWL_MAX_SCAN_SIZE - sizeof(*scan));
+	rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+	rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+	scan->rx_chain = cpu_to_le16(rx_chain);
+	cmd_len = iwl_fill_probe_req(priv,
+				(struct ieee80211_mgmt *)scan->data,
+				priv->scan_request->ie,
+				priv->scan_request->ie_len,
+				IWL_MAX_SCAN_SIZE - sizeof(*scan));
 
 	scan->tx_cmd.len = cpu_to_le16(cmd_len);
 
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
+	if (iwl_is_monitor_mode(priv))
 		scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 
 	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
 			       RXON_FILTER_BCON_AWARE_MSK);
 
 	scan->channel_count =
-		iwl_get_channels_for_scan(priv, band, 1, /* active */
-			n_probes,
+		iwl_get_channels_for_scan(priv, band, is_active, n_probes,
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	if (scan->channel_count == 0) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 44ab03a12e4..2addf735b19 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -86,8 +86,7 @@ static void iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id)
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
 
-	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) &&
-	    !(priv->stations_39[sta_id].used & IWL_STA_DRIVER_ACTIVE))
+	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE))
 		IWL_ERR(priv, "ACTIVATE a non DRIVER active station %d\n",
 			sta_id);
 
@@ -228,15 +227,16 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 }
 
 /**
- * iwl_add_station_flags - Add station to tables in driver and device
+ * iwl_add_station - Add station to tables in driver and device
  */
-u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
-			 u8 flags, struct ieee80211_sta_ht_cap *ht_info)
+u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
+		struct ieee80211_sta_ht_cap *ht_info)
 {
-	int i;
-	int sta_id = IWL_INVALID_STATION;
 	struct iwl_station_entry *station;
 	unsigned long flags_spin;
+	int i;
+	int sta_id = IWL_INVALID_STATION;
+	u16 rate;
 
 	spin_lock_irqsave(&priv->sta_lock, flags_spin);
 	if (is_ap)
@@ -288,6 +288,12 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
 	    priv->iw_mode != NL80211_IFTYPE_ADHOC)
 		iwl_set_ht_add_station(priv, sta_id, ht_info);
 
+	/* 3945 only */
+	rate = (priv->band == IEEE80211_BAND_5GHZ) ?
+		IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP;
+	/* Turn on both antennas for the station... */
+	station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
+
 	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 
 	/* Add station to device's station table */
@@ -295,7 +301,7 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
 	return sta_id;
 
 }
-EXPORT_SYMBOL(iwl_add_station_flags);
+EXPORT_SYMBOL(iwl_add_station);
 
 static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr)
 {
@@ -408,7 +414,7 @@ static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr,
 /**
  * iwl_remove_station - Remove driver's knowledge of station.
  */
-int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
+int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 {
 	int sta_id = IWL_INVALID_STATION;
 	int i, ret = -EINVAL;
@@ -490,7 +496,7 @@ void iwl_clear_stations_table(struct iwl_priv *priv)
 	/* keep track of static keys */
 	for (i = 0; i < WEP_KEYS_MAX ; i++) {
 		if (priv->wep_keys[i].key_size)
-			test_and_set_bit(i, &priv->ucode_key_table);
+			set_bit(i, &priv->ucode_key_table);
 	}
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
@@ -946,7 +952,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd);
  *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
  *       which requires station table entry to exist).
  */
-static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
+static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 {
 	int i, r;
 	struct iwl_link_quality_cmd link_cmd = {
@@ -979,8 +985,9 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
 	link_cmd.general_params.single_stream_ant_msk =
 				first_antenna(priv->hw_params.valid_tx_ant);
 	link_cmd.general_params.dual_stream_ant_msk = 3;
-	link_cmd.agg_params.agg_dis_start_th = 3;
-	link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000);
+	link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+	link_cmd.agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
 
 	/* Update the rate scaling for control frame Tx to AP */
 	link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id;
@@ -995,7 +1002,7 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
  * there is only one AP station with id= IWL_AP_ID
  * NOTE: mutex must be held before calling this function
  */
-int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
+int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 {
 	struct ieee80211_sta *sta;
 	struct ieee80211_sta_ht_cap ht_config;
@@ -1020,8 +1027,7 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
 		rcu_read_unlock();
 	}
 
-	sta_id = iwl_add_station_flags(priv, addr, is_ap,
-				       0, cur_ht_config);
+	sta_id = iwl_add_station(priv, addr, is_ap, CMD_SYNC, cur_ht_config);
 
 	/* Set up default rate scaling table in device's station table */
 	iwl_sta_init_lq(priv, addr, is_ap);
@@ -1067,8 +1073,8 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 			return sta_id;
 
 		/* Create new station table entry */
-		sta_id = iwl_add_station_flags(priv, hdr->addr1,
-						   0, CMD_ASYNC, NULL);
+		sta_id = iwl_add_station(priv, hdr->addr1, false,
+					CMD_ASYNC, NULL);
 
 		if (sta_id != IWL_INVALID_STATION)
 			return sta_id;
@@ -1079,11 +1085,6 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
 		return priv->hw_params.bcast_sta_id;
 
-	/* If we are in monitor mode, use BCAST. This is required for
-	 * packet injection. */
-	case NL80211_IFTYPE_MONITOR:
-		return priv->hw_params.bcast_sta_id;
-
 	default:
 		IWL_WARN(priv, "Unknown mode of operation: %d\n",
 			priv->iw_mode);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 59a586b6b56..6deebade636 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -51,16 +51,15 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 			struct ieee80211_key_conf *keyconf,
 			const u8 *addr, u32 iv32, u16 *phase1key);
 
-int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap);
-int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap);
+int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
+int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_clear_stations_table(struct iwl_priv *priv);
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv);
 int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr);
 int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr);
 int iwl_send_add_sta(struct iwl_priv *priv,
 		     struct iwl_addsta_cmd *sta, u8 flags);
-u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr,
-			int is_ap, u8 flags,
+u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
 			struct ieee80211_sta_ht_cap *ht_info);
 void iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid);
 int iwl_sta_rx_agg_start(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 71d5b8a1a73..85ae7a62109 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -102,13 +102,8 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 			return ret;
 		}
 
-		/* restore this queue's parameters in nic hardware. */
-		ret = iwl_grab_nic_access(priv);
-		if (ret)
-			return ret;
 		iwl_write_direct32(priv, HBUS_TARG_WRPTR,
 				     txq->q.write_ptr | (txq_id << 8));
-		iwl_release_nic_access(priv);
 
 	/* else not in power-save mode, uCode will never sleep when we're
 	 * trying to tx (during RFKILL, we're not trying to tx). */
@@ -429,11 +424,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 		goto error_kw;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (unlikely(ret)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		goto error_reset;
-	}
 
 	/* Turn off all Tx DMA fifos */
 	priv->cfg->ops->lib->txq_set_sched(priv, 0);
@@ -441,7 +431,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 	/* Tell NIC where to find the "keep warm" buffer */
 	iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, priv->kw.dma >> 4);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Alloc and init all Tx queues, including the command queue (#4) */
@@ -460,7 +449,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 
  error:
 	iwl_hw_txq_ctx_free(priv);
- error_reset:
 	iwl_free_dma_ptr(priv, &priv->kw);
  error_kw:
 	iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
@@ -478,10 +466,6 @@ void iwl_txq_ctx_stop(struct iwl_priv *priv)
 
 	/* Turn off all Tx DMA fifos */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (iwl_grab_nic_access(priv)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
 
 	priv->cfg->ops->lib->txq_set_sched(priv, 0);
 
@@ -492,7 +476,6 @@ void iwl_txq_ctx_stop(struct iwl_priv *priv)
 				    FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
 				    1000);
 	}
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Deallocate memory for all Tx queues */
@@ -728,7 +711,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* drop all data frame if we are not associated */
 	if (ieee80211_is_data(fc) &&
-	    (priv->iw_mode != NL80211_IFTYPE_MONITOR ||
+	    (!iwl_is_monitor_mode(priv) ||
 	    !(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */
 	    (!iwl_is_associated(priv) ||
 	     ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id) ||
@@ -1183,8 +1166,10 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 			__func__, ra, tid);
 
 	sta_id = iwl_find_station(priv, ra);
-	if (sta_id == IWL_INVALID_STATION)
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Start AGG on invalid station\n");
 		return -ENXIO;
+	}
 
 	if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
 		IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
@@ -1192,8 +1177,10 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 	}
 
 	txq_id = iwl_txq_ctx_activate_free(priv);
-	if (txq_id == -1)
+	if (txq_id == -1) {
+		IWL_ERR(priv, "No free aggregation queue available\n");
 		return -ENXIO;
+	}
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
 	tid_data = &priv->stations[sta_id].tid[tid];
@@ -1207,7 +1194,7 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 		return ret;
 
 	if (tid_data->tfds_in_queue == 0) {
-		IWL_ERR(priv, "HW queue is empty\n");
+		IWL_DEBUG_HT(priv, "HW queue is empty\n");
 		tid_data->agg.state = IWL_AGG_ON;
 		ieee80211_start_tx_ba_cb_irqsafe(priv->hw, ra, tid);
 	} else {
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index ff4d0e41d7c..83d31606dd0 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -95,188 +95,6 @@ struct iwl_mod_params iwl3945_mod_params = {
 	/* the rest are 0 by default */
 };
 
-/*************** STATION TABLE MANAGEMENT ****
- * mac80211 should be examined to determine if sta_info is duplicating
- * the functionality provided here
- */
-
-/**************************************************************/
-#if 0 /* temporary disable till we add real remove station */
-/**
- * iwl3945_remove_station - Remove driver's knowledge of station.
- *
- * NOTE:  This does not remove station from device's station table.
- */
-static u8 iwl3945_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
-{
-	int index = IWL_INVALID_STATION;
-	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-
-	if (is_ap)
-		index = IWL_AP_ID;
-	else if (is_broadcast_ether_addr(addr))
-		index = priv->hw_params.bcast_sta_id;
-	else
-		for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++)
-			if (priv->stations_39[i].used &&
-			    !compare_ether_addr(priv->stations_39[i].sta.sta.addr,
-						addr)) {
-				index = i;
-				break;
-			}
-
-	if (unlikely(index == IWL_INVALID_STATION))
-		goto out;
-
-	if (priv->stations_39[index].used) {
-		priv->stations_39[index].used = 0;
-		priv->num_stations--;
-	}
-
-	BUG_ON(priv->num_stations < 0);
-
-out:
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-	return 0;
-}
-#endif
-
-/**
- * iwl3945_clear_stations_table - Clear the driver's station table
- *
- * NOTE:  This does not clear or otherwise alter the device's station table.
- */
-static void iwl3945_clear_stations_table(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-
-	priv->num_stations = 0;
-	memset(priv->stations_39, 0, sizeof(priv->stations_39));
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-}
-
-/**
- * iwl3945_add_station - Add station to station tables in driver and device
- */
-u8 iwl3945_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap, u8 flags)
-{
-	int i;
-	int index = IWL_INVALID_STATION;
-	struct iwl3945_station_entry *station;
-	unsigned long flags_spin;
-	u8 rate;
-
-	spin_lock_irqsave(&priv->sta_lock, flags_spin);
-	if (is_ap)
-		index = IWL_AP_ID;
-	else if (is_broadcast_ether_addr(addr))
-		index = priv->hw_params.bcast_sta_id;
-	else
-		for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) {
-			if (!compare_ether_addr(priv->stations_39[i].sta.sta.addr,
-						addr)) {
-				index = i;
-				break;
-			}
-
-			if (!priv->stations_39[i].used &&
-			    index == IWL_INVALID_STATION)
-				index = i;
-		}
-
-	/* These two conditions has the same outcome but keep them separate
-	  since they have different meaning */
-	if (unlikely(index == IWL_INVALID_STATION)) {
-		spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-		return index;
-	}
-
-	if (priv->stations_39[index].used &&
-	   !compare_ether_addr(priv->stations_39[index].sta.sta.addr, addr)) {
-		spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-		return index;
-	}
-
-	IWL_DEBUG_ASSOC(priv, "Add STA ID %d: %pM\n", index, addr);
-	station = &priv->stations_39[index];
-	station->used = 1;
-	priv->num_stations++;
-
-	/* Set up the REPLY_ADD_STA command to send to device */
-	memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd));
-	memcpy(station->sta.sta.addr, addr, ETH_ALEN);
-	station->sta.mode = 0;
-	station->sta.sta.sta_id = index;
-	station->sta.station_flags = 0;
-
-	if (priv->band == IEEE80211_BAND_5GHZ)
-		rate = IWL_RATE_6M_PLCP;
-	else
-		rate =	IWL_RATE_1M_PLCP;
-
-	/* Turn on both antennas for the station... */
-	station->sta.rate_n_flags =
-			iwl3945_hw_set_rate_n_flags(rate, RATE_MCS_ANT_AB_MSK);
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-
-	/* Add station to device's station table */
-	iwl_send_add_sta(priv,
-			 (struct iwl_addsta_cmd *)&station->sta, flags);
-	return index;
-
-}
-
-static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
-{
-	int rc = 0;
-	struct iwl_rx_packet *res = NULL;
-	struct iwl3945_rxon_assoc_cmd rxon_assoc;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_RXON_ASSOC,
-		.len = sizeof(rxon_assoc),
-		.meta.flags = CMD_WANT_SKB,
-		.data = &rxon_assoc,
-	};
-	const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
-	const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
-
-	if ((rxon1->flags == rxon2->flags) &&
-	    (rxon1->filter_flags == rxon2->filter_flags) &&
-	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
-	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
-		return 0;
-	}
-
-	rxon_assoc.flags = priv->staging_rxon.flags;
-	rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
-	rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
-	rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
-	rxon_assoc.reserved = 0;
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
-	if (rc)
-		return rc;
-
-	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
-		rc = -EIO;
-	}
-
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.meta.u.skb);
-
-	return rc;
-}
-
 /**
  * iwl3945_get_antenna_flags - Get antenna flags for RXON command
  * @priv: eeprom and antenna fields are used to determine antenna flags
@@ -314,150 +132,6 @@ __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
 	return 0;		/* "diversity" is default if error */
 }
 
-/**
- * iwl3945_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data.  This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-static int iwl3945_commit_rxon(struct iwl_priv *priv)
-{
-	/* cast away the const for active_rxon in this function */
-	struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
-	struct iwl3945_rxon_cmd *staging_rxon = (void *)&priv->staging_rxon;
-	int rc = 0;
-	bool new_assoc =
-		!!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
-
-	if (!iwl_is_alive(priv))
-		return -1;
-
-	/* always get timestamp with Rx frame */
-	staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
-
-	/* select antenna */
-	staging_rxon->flags &=
-	    ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
-	staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
-
-	rc = iwl_check_rxon_cmd(priv);
-	if (rc) {
-		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
-		return -EINVAL;
-	}
-
-	/* If we don't need to send a full RXON, we can use
-	 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
-	 * and other flags for the current radio configuration. */
-	if (!iwl_full_rxon_required(priv)) {
-		rc = iwl3945_send_rxon_assoc(priv);
-		if (rc) {
-			IWL_ERR(priv, "Error setting RXON_ASSOC "
-				  "configuration (%d).\n", rc);
-			return rc;
-		}
-
-		memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
-		return 0;
-	}
-
-	/* If we are currently associated and the new config requires
-	 * an RXON_ASSOC and the new config wants the associated mask enabled,
-	 * we must clear the associated from the active configuration
-	 * before we apply the new config */
-	if (iwl_is_associated(priv) && new_assoc) {
-		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
-		/*
-		 * reserved4 and 5 could have been filled by the iwlcore code.
-		 * Let's clear them before pushing to the 3945.
-		 */
-		active_rxon->reserved4 = 0;
-		active_rxon->reserved5 = 0;
-		rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-				      sizeof(struct iwl3945_rxon_cmd),
-				      &priv->active_rxon);
-
-		/* If the mask clearing failed then we set
-		 * active_rxon back to what it was previously */
-		if (rc) {
-			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-			IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
-				  "configuration (%d).\n", rc);
-			return rc;
-		}
-	}
-
-	IWL_DEBUG_INFO(priv, "Sending RXON\n"
-		       "* with%s RXON_FILTER_ASSOC_MSK\n"
-		       "* channel = %d\n"
-		       "* bssid = %pM\n",
-		       (new_assoc ? "" : "out"),
-		       le16_to_cpu(staging_rxon->channel),
-		       staging_rxon->bssid_addr);
-
-	/*
-	 * reserved4 and 5 could have been filled by the iwlcore code.
-	 * Let's clear them before pushing to the 3945.
-	 */
-	staging_rxon->reserved4 = 0;
-	staging_rxon->reserved5 = 0;
-
-	iwl_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
-
-	/* Apply the new configuration */
-	rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-			      sizeof(struct iwl3945_rxon_cmd),
-			      staging_rxon);
-	if (rc) {
-		IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
-		return rc;
-	}
-
-	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
-	iwl3945_clear_stations_table(priv);
-
-	/* If we issue a new RXON command which required a tune then we must
-	 * send a new TXPOWER command or we won't be able to Tx any frames */
-	rc = priv->cfg->ops->lib->send_tx_power(priv);
-	if (rc) {
-		IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
-		return rc;
-	}
-
-	/* Add the broadcast address so we can send broadcast frames */
-	if (iwl3945_add_station(priv, iwl_bcast_addr, 0, 0) ==
-	    IWL_INVALID_STATION) {
-		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
-		return -EIO;
-	}
-
-	/* If we have set the ASSOC_MSK and we are in BSS mode then
-	 * add the IWL_AP_ID to the station rate table */
-	if (iwl_is_associated(priv) &&
-	    (priv->iw_mode == NL80211_IFTYPE_STATION))
-		if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr,
-					1, 0)
-		    == IWL_INVALID_STATION) {
-			IWL_ERR(priv, "Error adding AP address for transmit\n");
-			return -EIO;
-		}
-
-	/* Init the hardware's rate fallback order based on the band */
-	rc = iwl3945_init_hw_rate_table(priv);
-	if (rc) {
-		IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
-		return -EIO;
-	}
-
-	return 0;
-}
-
 static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 				   struct ieee80211_key_conf *keyconf,
 				   u8 sta_id)
@@ -477,32 +151,31 @@ static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 	key_flags &= ~STA_KEY_FLG_INVALID;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
-	priv->stations_39[sta_id].keyinfo.alg = keyconf->alg;
-	priv->stations_39[sta_id].keyinfo.keylen = keyconf->keylen;
-	memcpy(priv->stations_39[sta_id].keyinfo.key, keyconf->key,
+	priv->stations[sta_id].keyinfo.alg = keyconf->alg;
+	priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
 	       keyconf->keylen);
 
-	memcpy(priv->stations_39[sta_id].sta.key.key, keyconf->key,
+	memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
 	       keyconf->keylen);
 
-	if ((priv->stations_39[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
+	if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
-		priv->stations_39[sta_id].sta.key.key_offset =
+		priv->stations[sta_id].sta.key.key_offset =
 				 iwl_get_free_ucode_key_index(priv);
 	/* else, we are overriding an existing key => no need to allocated room
 	* in uCode. */
 
-	WARN(priv->stations_39[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
 		"no space for a new key");
 
-	priv->stations_39[sta_id].sta.key.key_flags = key_flags;
-	priv->stations_39[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	priv->stations[sta_id].sta.key.key_flags = key_flags;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
 	IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
 
-	ret = iwl_send_add_sta(priv,
-		(struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, CMD_ASYNC);
+	ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
@@ -528,17 +201,16 @@ static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
-	memset(&priv->stations_39[sta_id].keyinfo, 0, sizeof(struct iwl3945_hw_key));
-	memset(&priv->stations_39[sta_id].sta.key, 0,
+	memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
+	memset(&priv->stations[sta_id].sta.key, 0,
 		sizeof(struct iwl4965_keyinfo));
-	priv->stations_39[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
-	priv->stations_39[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
 	IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
-	iwl_send_add_sta(priv,
-		(struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, 0);
+	iwl_send_add_sta(priv, &priv->stations[sta_id].sta, 0);
 	return 0;
 }
 
@@ -739,7 +411,8 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
 		priv->rxon_timing.atim_window = 0;
 	} else {
 		priv->rxon_timing.beacon_interval =
-			iwl3945_adjust_beacon_interval(conf->beacon_int);
+			iwl3945_adjust_beacon_interval(
+				priv->vif->bss_conf.beacon_int);
 		/* TODO: we need to get atim_window from upper stack
 		 * for now we set to 0 */
 		priv->rxon_timing.atim_window = 0;
@@ -758,35 +431,6 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
 		le16_to_cpu(priv->rxon_timing.atim_window));
 }
 
-static int iwl3945_set_mode(struct iwl_priv *priv, int mode)
-{
-	if (mode == NL80211_IFTYPE_ADHOC) {
-		const struct iwl_channel_info *ch_info;
-
-		ch_info = iwl_get_channel_info(priv,
-			priv->band,
-			le16_to_cpu(priv->staging_rxon.channel));
-
-		if (!ch_info || !is_channel_ibss(ch_info)) {
-			IWL_ERR(priv, "channel %d not IBSS channel\n",
-				  le16_to_cpu(priv->staging_rxon.channel));
-			return -EINVAL;
-		}
-	}
-
-	iwl_connection_init_rx_config(priv, mode);
-
-	iwl3945_clear_stations_table(priv);
-
-	/* don't commit rxon if rf-kill is on*/
-	if (!iwl_is_ready_rf(priv))
-		return -EAGAIN;
-
-	iwl3945_commit_rxon(priv);
-
-	return 0;
-}
-
 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
 				      struct ieee80211_tx_info *info,
 				      struct iwl_cmd *cmd,
@@ -794,8 +438,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
 				      int sta_id)
 {
 	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-	struct iwl3945_hw_key *keyinfo =
-	    &priv->stations_39[sta_id].keyinfo;
+	struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
 
 	switch (keyinfo->alg) {
 	case ALG_CCMP:
@@ -893,64 +536,6 @@ static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
 	tx->next_frame_len = 0;
 }
 
-/**
- * iwl3945_get_sta_id - Find station's index within station table
- */
-static int iwl3945_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
-{
-	int sta_id;
-	u16 fc = le16_to_cpu(hdr->frame_control);
-
-	/* If this frame is broadcast or management, use broadcast station id */
-	if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
-	    is_multicast_ether_addr(hdr->addr1))
-		return priv->hw_params.bcast_sta_id;
-
-	switch (priv->iw_mode) {
-
-	/* If we are a client station in a BSS network, use the special
-	 * AP station entry (that's the only station we communicate with) */
-	case NL80211_IFTYPE_STATION:
-		return IWL_AP_ID;
-
-	/* If we are an AP, then find the station, or use BCAST */
-	case NL80211_IFTYPE_AP:
-		sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
-		if (sta_id != IWL_INVALID_STATION)
-			return sta_id;
-		return priv->hw_params.bcast_sta_id;
-
-	/* If this frame is going out to an IBSS network, find the station,
-	 * or create a new station table entry */
-	case NL80211_IFTYPE_ADHOC: {
-		/* Create new station table entry */
-		sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
-		if (sta_id != IWL_INVALID_STATION)
-			return sta_id;
-
-		sta_id = iwl3945_add_station(priv, hdr->addr1, 0, CMD_ASYNC);
-
-		if (sta_id != IWL_INVALID_STATION)
-			return sta_id;
-
-		IWL_DEBUG_DROP(priv, "Station %pM not in station map. "
-			       "Defaulting to broadcast...\n",
-			       hdr->addr1);
-		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
-		return priv->hw_params.bcast_sta_id;
-	}
-	/* If we are in monitor mode, use BCAST. This is required for
-	 * packet injection. */
-	case NL80211_IFTYPE_MONITOR:
-		return priv->hw_params.bcast_sta_id;
-
-	default:
-		IWL_WARN(priv, "Unknown mode of operation: %d\n",
-			priv->iw_mode);
-		return priv->hw_params.bcast_sta_id;
-	}
-}
-
 /*
  * start REPLY_TX command process
  */
@@ -1004,7 +589,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* drop all data frame if we are not associated */
 	if (ieee80211_is_data(fc) &&
-	    (priv->iw_mode != NL80211_IFTYPE_MONITOR) && /* packet injection */
+	    (!iwl_is_monitor_mode(priv)) && /* packet injection */
 	    (!iwl_is_associated(priv) ||
 	     ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) {
 		IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
@@ -1016,7 +601,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	hdr_len = ieee80211_hdrlen(fc);
 
 	/* Find (or create) index into station table for destination station */
-	sta_id = iwl3945_get_sta_id(priv, hdr);
+	sta_id = iwl_get_sta_id(priv, hdr);
 	if (sta_id == IWL_INVALID_STATION) {
 		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
@@ -1028,7 +613,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
 		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
-		seq_number = priv->stations_39[sta_id].tid[tid].seq_number &
+		seq_number = priv->stations[sta_id].tid[tid].seq_number &
 				IEEE80211_SCTL_SEQ;
 		hdr->seq_ctrl = cpu_to_le16(seq_number) |
 			(hdr->seq_ctrl &
@@ -1088,7 +673,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
 		if (qc)
-			priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
+			priv->stations[sta_id].tid[tid].seq_number = seq_number;
 	} else {
 		wait_write_ptr = 1;
 		txq->need_update = 0;
@@ -1424,18 +1009,12 @@ static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
 
-	if (flags & SW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-
 	iwl_scan_cancel(priv);
 
 	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
-	     test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
-	    (test_bit(STATUS_RF_KILL_SW, &status) !=
-	     test_bit(STATUS_RF_KILL_SW, &priv->status)))
-		queue_work(priv->workqueue, &priv->rf_kill);
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+				test_bit(STATUS_RF_KILL_HW, &priv->status));
 	else
 		wake_up_interruptible(&priv->wait_command_queue);
 }
@@ -1591,7 +1170,7 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
 
 	/* If we've added more space for the firmware to place data, tell it.
 	 * Increment device's write pointer in multiples of 8. */
-	if ((write != (rxq->write & ~0x7))
+	if ((rxq->write_actual != (rxq->write & ~0x7))
 	    || (abs(rxq->write - rxq->read) > 7)) {
 		spin_lock_irqsave(&rxq->lock, flags);
 		rxq->need_update = 1;
@@ -1612,21 +1191,30 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
  * Also restock the Rx queue via iwl3945_rx_queue_restock.
  * This is called as a scheduled work item (except for during initialization)
  */
-static void iwl3945_rx_allocate(struct iwl_priv *priv)
+static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
 	unsigned long flags;
-	spin_lock_irqsave(&rxq->lock, flags);
-	while (!list_empty(&rxq->rx_used)) {
+
+	while (1) {
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			return;
+		}
+
 		element = rxq->rx_used.next;
 		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		/* Alloc a new receive buffer */
 		rxb->skb =
 		    alloc_skb(priv->hw_params.rx_buf_size,
-				__GFP_NOWARN | GFP_ATOMIC);
+				priority);
 		if (!rxb->skb) {
 			if (net_ratelimit())
 				IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
@@ -1644,18 +1232,18 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv)
 		 */
 		skb_reserve(rxb->skb, 4);
 
-		priv->alloc_rxb_skb++;
-		list_del(element);
-
 		/* Get physical address of RB/SKB */
 		rxb->real_dma_addr = pci_map_single(priv->pci_dev,
 						rxb->skb->data,
 						priv->hw_params.rx_buf_size,
 						PCI_DMA_FROMDEVICE);
+
+		spin_lock_irqsave(&rxq->lock, flags);
 		list_add_tail(&rxb->list, &rxq->rx_free);
+		priv->alloc_rxb_skb++;
 		rxq->free_count++;
+		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
-	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
 void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
@@ -1685,33 +1273,30 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
 	rxq->free_count = 0;
+	rxq->write_actual = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
-/*
- * this should be called while priv->lock is locked
- */
-static void __iwl3945_rx_replenish(void *data)
-{
-	struct iwl_priv *priv = data;
-
-	iwl3945_rx_allocate(priv);
-	iwl3945_rx_queue_restock(priv);
-}
-
-
 void iwl3945_rx_replenish(void *data)
 {
 	struct iwl_priv *priv = data;
 	unsigned long flags;
 
-	iwl3945_rx_allocate(priv);
+	iwl3945_rx_allocate(priv, GFP_KERNEL);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl3945_rx_queue_restock(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
+{
+	iwl3945_rx_allocate(priv, GFP_ATOMIC);
+
+	iwl3945_rx_queue_restock(priv);
+}
+
+
 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
  * This free routine walks the list of POOL entries and if SKB is set to
@@ -1834,13 +1419,19 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 	unsigned long flags;
 	u8 fill_rx = 0;
 	u32 count = 8;
+	int total_empty = 0;
 
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
 	 * buffer that the driver may process (last buffer filled by ucode). */
 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
 	i = rxq->read;
 
-	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - priv->rxq.write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
 		fill_rx = 1;
 	/* Rx interrupt, but nothing sent from uCode */
 	if (i == r)
@@ -1879,6 +1470,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 				"r = %d, i = %d, %s, 0x%02x\n", r, i,
 				get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
 		} else {
 			/* No handling needed */
 			IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
@@ -1916,7 +1508,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 			count++;
 			if (count >= 8) {
 				priv->rxq.read = i;
-				__iwl3945_rx_replenish(priv);
+				iwl3945_rx_replenish_now(priv);
 				count = 0;
 			}
 		}
@@ -1924,7 +1516,10 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 
 	/* Backtrack one entry */
 	priv->rxq.read = i;
-	iwl3945_rx_queue_restock(priv);
+	if (fill_rx)
+		iwl3945_rx_replenish_now(priv);
+	else
+		iwl3945_rx_queue_restock(priv);
 }
 
 /* call this function to flush any scheduled tasklet */
@@ -1963,7 +1558,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 	u32 i;
 	u32 desc, time, count, base, data1;
 	u32 blink1, blink2, ilink1, ilink2;
-	int rc;
 
 	base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
 
@@ -1972,11 +1566,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 		return;
 	}
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
 
 	count = iwl_read_targ_mem(priv, base);
 
@@ -2011,8 +1600,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 			ilink1, ilink2, data1);
 	}
 
-	iwl_release_nic_access(priv);
-
 }
 
 #define EVENT_START_OFFSET  (6 * sizeof(u32))
@@ -2020,7 +1607,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 /**
  * iwl3945_print_event_log - Dump error event log to syslog
  *
- * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  */
 static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 				u32 num_events, u32 mode)
@@ -2063,7 +1649,6 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 
 static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 {
-	int rc;
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
 	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
@@ -2077,12 +1662,6 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 		return;
 	}
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	/* event log header */
 	capacity = iwl_read_targ_mem(priv, base);
 	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
@@ -2094,7 +1673,6 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 	/* bail out if nothing in log */
 	if (size == 0) {
 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		iwl_release_nic_access(priv);
 		return;
 	}
 
@@ -2110,24 +1688,6 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 	/* (then/else) start at top of log */
 	iwl3945_print_event_log(priv, 0, next_entry, mode);
 
-	iwl_release_nic_access(priv);
-}
-
-static void iwl3945_error_recovery(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
-	       sizeof(priv->staging_rxon));
-	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl3945_commit_rxon(priv);
-
-	iwl3945_add_station(priv, priv->bssid, 1, 0);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
-	priv->error_recovering = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static void iwl3945_irq_tasklet(struct iwl_priv *priv)
@@ -2178,6 +1738,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 		/* Tell the device to stop sending interrupts */
 		iwl_disable_interrupts(priv);
 
+		priv->isr_stats.hw++;
 		iwl_irq_handle_error(priv);
 
 		handled |= CSR_INT_BIT_HW_ERR;
@@ -2190,13 +1751,17 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (priv->debug_level & (IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD)
+		if (inta & CSR_INT_BIT_SCD) {
 			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
 				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
 
 		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE)
+		if (inta & CSR_INT_BIT_ALIVE) {
 			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
 	}
 #endif
 	/* Safely ignore these bits for debug checks below */
@@ -2206,6 +1771,8 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 	if (inta & CSR_INT_BIT_SW_ERR) {
 		IWL_ERR(priv, "Microcode SW error detected. "
 			"Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		priv->isr_stats.sw_err = inta;
 		iwl_irq_handle_error(priv);
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
@@ -2221,6 +1788,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
 		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
 
+		priv->isr_stats.wakeup++;
 		handled |= CSR_INT_BIT_WAKEUP;
 	}
 
@@ -2229,27 +1797,28 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 	 * notifications from uCode come through here*/
 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
 		iwl3945_rx_handle(priv);
+		priv->isr_stats.rx++;
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
 		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
 
 		iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
-		if (!iwl_grab_nic_access(priv)) {
-			iwl_write_direct32(priv, FH39_TCSR_CREDIT
-					     (FH39_SRVC_CHNL), 0x0);
-			iwl_release_nic_access(priv);
-		}
+		iwl_write_direct32(priv, FH39_TCSR_CREDIT
+					(FH39_SRVC_CHNL), 0x0);
 		handled |= CSR_INT_BIT_FH_TX;
 	}
 
-	if (inta & ~handled)
+	if (inta & ~handled) {
 		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
 
-	if (inta & ~CSR_INI_SET_MASK) {
+	if (inta & ~priv->inta_mask) {
 		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~CSR_INI_SET_MASK);
+			 inta & ~priv->inta_mask);
 		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
 	}
 
@@ -2413,10 +1982,6 @@ static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 le
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc)
-		return rc;
-
 	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
 			       IWL39_RTC_INST_LOWER_BOUND);
 
@@ -2437,7 +2002,6 @@ static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 le
 		}
 	}
 
-	iwl_release_nic_access(priv);
 
 	if (!errcnt)
 		IWL_DEBUG_INFO(priv,
@@ -2461,10 +2025,6 @@ static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc)
-		return rc;
-
 	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
 		/* read data comes through single port, auto-incr addr */
 		/* NOTE: Use the debugless read so we don't flood kernel log
@@ -2485,8 +2045,6 @@ static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 		}
 	}
 
-	iwl_release_nic_access(priv);
-
 	return rc;
 }
 
@@ -2810,20 +2368,11 @@ static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
 {
 	dma_addr_t pinst;
 	dma_addr_t pdata;
-	int rc = 0;
-	unsigned long flags;
 
 	/* bits 31:0 for 3945 */
 	pinst = priv->ucode_code.p_addr;
 	pdata = priv->ucode_data_backup.p_addr;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
-
 	/* Tell bootstrap uCode where to find image to load */
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
@@ -2835,13 +2384,9 @@ static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
 				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
 
-	iwl_release_nic_access(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
 
-	return rc;
+	return 0;
 }
 
 /**
@@ -2887,11 +2432,6 @@ static void iwl3945_init_alive_start(struct iwl_priv *priv)
 	queue_work(priv->workqueue, &priv->restart);
 }
 
-
-/* temporary */
-static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw,
-				     struct sk_buff *skb);
-
 /**
  * iwl3945_alive_start - called after REPLY_ALIVE notification received
  *                   from protocol/runtime uCode (initialization uCode's
@@ -2899,7 +2439,6 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw,
  */
 static void iwl3945_alive_start(struct iwl_priv *priv)
 {
-	int rc = 0;
 	int thermal_spin = 0;
 	u32 rfkill;
 
@@ -2922,17 +2461,10 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 		goto restart;
 	}
 
-	iwl3945_clear_stations_table(priv);
-
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		IWL_WARN(priv, "Can not read RFKILL status from adapter\n");
-		return;
-	}
+	iwl_clear_stations_table(priv);
 
 	rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
 	IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
-	iwl_release_nic_access(priv);
 
 	if (rfkill & 0x1) {
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -2952,9 +2484,6 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	/* After the ALIVE response, we can send commands to 3945 uCode */
 	set_bit(STATUS_ALIVE, &priv->status);
 
-	/* Clear out the uCode error bit if it is set */
-	clear_bit(STATUS_FW_ERROR, &priv->status);
-
 	if (iwl_is_rfkill(priv))
 		return;
 
@@ -2981,7 +2510,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	iwl_send_bt_config(priv);
 
 	/* Configure the adapter for unassociated operation */
-	iwl3945_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	iwl3945_reg_txpower_periodic(priv);
 
@@ -2991,17 +2520,17 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
-	if (priv->error_recovering)
-		iwl3945_error_recovery(priv);
-
 	/* reassociate for ADHOC mode */
 	if (priv->vif && (priv->iw_mode == NL80211_IFTYPE_ADHOC)) {
 		struct sk_buff *beacon = ieee80211_beacon_get(priv->hw,
 								priv->vif);
 		if (beacon)
-			iwl3945_mac_beacon_update(priv->hw, beacon);
+			iwl_mac_beacon_update(priv->hw, beacon);
 	}
 
+	if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
+		iwl_set_mode(priv, priv->iw_mode);
+
 	return;
 
  restart:
@@ -3024,7 +2553,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
 
 	iwl3945_led_unregister(priv);
-	iwl3945_clear_stations_table(priv);
+	iwl_clear_stations_table(priv);
 
 	/* Unblock any waiting calls */
 	wake_up_interruptible_all(&priv->wait_command_queue);
@@ -3047,31 +2576,23 @@ static void __iwl3945_down(struct iwl_priv *priv)
 		ieee80211_stop_queues(priv->hw);
 
 	/* If we have not previously called iwl3945_init() then
-	 * clear all bits but the RF Kill and SUSPEND bits and return */
+	 * clear all bits but the RF Kill bits and return */
 	if (!iwl_is_init(priv)) {
 		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 					STATUS_RF_KILL_HW |
-			       test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-					STATUS_RF_KILL_SW |
 			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 					STATUS_GEO_CONFIGURED |
-			       test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-					STATUS_IN_SUSPEND |
 				test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 					STATUS_EXIT_PENDING;
 		goto exit;
 	}
 
-	/* ...otherwise clear out all the status bits but the RF Kill and
-	 * SUSPEND bits and continue taking the NIC down. */
+	/* ...otherwise clear out all the status bits but the RF Kill
+	 * bit and continue taking the NIC down. */
 	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 				STATUS_RF_KILL_HW |
-			test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-				STATUS_RF_KILL_SW |
 			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 				STATUS_GEO_CONFIGURED |
-			test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-				STATUS_IN_SUSPEND |
 			test_bit(STATUS_FW_ERROR, &priv->status) <<
 				STATUS_FW_ERROR |
 			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
@@ -3085,17 +2606,12 @@ static void __iwl3945_down(struct iwl_priv *priv)
 	iwl3945_hw_txq_ctx_stop(priv);
 	iwl3945_hw_rxq_stop(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!iwl_grab_nic_access(priv)) {
-		iwl_write_prph(priv, APMG_CLK_DIS_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT);
-		iwl_release_nic_access(priv);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	iwl_write_prph(priv, APMG_CLK_DIS_REG,
+				APMG_CLK_VAL_DMA_CLK_RQT);
 
 	udelay(5);
 
-	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+	if (exit_pending)
 		priv->cfg->ops->lib->apm_ops.stop(priv);
 	else
 		priv->cfg->ops->lib->apm_ops.reset(priv);
@@ -3131,12 +2647,6 @@ static int __iwl3945_up(struct iwl_priv *priv)
 		return -EIO;
 	}
 
-	if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
-		IWL_WARN(priv, "Radio disabled by SW RF kill (module "
-			    "parameter)\n");
-		return -ENODEV;
-	}
-
 	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
 		IWL_ERR(priv, "ucode not available for device bring up\n");
 		return -EIO;
@@ -3148,10 +2658,8 @@ static int __iwl3945_up(struct iwl_priv *priv)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 	else {
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
-		if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
-			IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
-			return -ENODEV;
-		}
+		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
+		return -ENODEV;
 	}
 
 	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
@@ -3187,7 +2695,7 @@ static int __iwl3945_up(struct iwl_priv *priv)
 
 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
 
-		iwl3945_clear_stations_table(priv);
+		iwl_clear_stations_table(priv);
 
 		/* load bootstrap state machine,
 		 * load bootstrap program into processor's memory,
@@ -3255,15 +2763,14 @@ static void iwl3945_rfkill_poll(struct work_struct *data)
 {
 	struct iwl_priv *priv =
 	    container_of(data, struct iwl_priv, rfkill_poll.work);
-	unsigned long status = priv->status;
 
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 	else
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	if (test_bit(STATUS_RF_KILL_HW, &status) != test_bit(STATUS_RF_KILL_HW, &priv->status))
-		queue_work(priv->workqueue, &priv->rf_kill);
+	wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+			test_bit(STATUS_RF_KILL_HW, &priv->status));
 
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
 			   round_jiffies_relative(2 * HZ));
@@ -3283,9 +2790,9 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	int rc = 0;
 	struct iwl3945_scan_cmd *scan;
 	struct ieee80211_conf *conf = NULL;
-	u8 n_probes = 2;
+	u8 n_probes = 0;
 	enum ieee80211_band band;
-	DECLARE_SSID_BUF(ssid);
+	bool is_active = false;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -3386,18 +2893,25 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 			       scan_suspend_time, interval);
 	}
 
-	/* We should add the ability for user to lock to PASSIVE ONLY */
-	if (priv->one_direct_scan) {
-		IWL_DEBUG_SCAN(priv, "Kicking off one direct scan for '%s'\n",
-				print_ssid(ssid, priv->direct_ssid,
-				priv->direct_ssid_len));
-		scan->direct_scan[0].id = WLAN_EID_SSID;
-		scan->direct_scan[0].len = priv->direct_ssid_len;
-		memcpy(scan->direct_scan[0].ssid,
-		       priv->direct_ssid, priv->direct_ssid_len);
-		n_probes++;
+	if (priv->scan_request->n_ssids) {
+		int i, p = 0;
+		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
+		}
+		is_active = true;
 	} else
-		IWL_DEBUG_SCAN(priv, "Kicking off one indirect scan.\n");
+		IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
 
 	/* We don't build a direct scan probe request; the uCode will do
 	 * that based on the direct_mask added to each channel entry */
@@ -3414,7 +2928,12 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 		band = IEEE80211_BAND_2GHZ;
 	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
-		scan->good_CRC_th = IWL_GOOD_CRC_TH;
+		/*
+		 * If active scaning is requested but a certain channel
+		 * is marked passive, we can do active scanning if we
+		 * detect transmissions.
+		 */
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
 		band = IEEE80211_BAND_5GHZ;
 	} else {
 		IWL_WARN(priv, "Invalid scan band count\n");
@@ -3422,19 +2941,20 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	}
 
 	scan->tx_cmd.len = cpu_to_le16(
-		iwl_fill_probe_req(priv, band,
-				   (struct ieee80211_mgmt *)scan->data,
-				   IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+			iwl_fill_probe_req(priv,
+				(struct ieee80211_mgmt *)scan->data,
+				priv->scan_request->ie,
+				priv->scan_request->ie_len,
+				IWL_MAX_SCAN_SIZE - sizeof(*scan)));
 
 	/* select Rx antennas */
 	scan->flags |= iwl3945_get_antenna_flags(priv);
 
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
+	if (iwl_is_monitor_mode(priv))
 		scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 
 	scan->channel_count =
-		iwl3945_get_channels_for_scan(priv, band, 1, /* active */
-					      n_probes,
+		iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	if (scan->channel_count == 0) {
@@ -3482,7 +3002,6 @@ static void iwl3945_bg_up(struct work_struct *data)
 	mutex_lock(&priv->mutex);
 	__iwl3945_up(priv);
 	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
 }
 
 static void iwl3945_bg_restart(struct work_struct *data)
@@ -3492,8 +3011,17 @@ static void iwl3945_bg_restart(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	iwl3945_down(priv);
-	queue_work(priv->workqueue, &priv->up);
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		mutex_lock(&priv->mutex);
+		priv->vif = NULL;
+		priv->is_open = 0;
+		mutex_unlock(&priv->mutex);
+		iwl3945_down(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		iwl3945_down(priv);
+		queue_work(priv->workqueue, &priv->up);
+	}
 }
 
 static void iwl3945_bg_rx_replenish(struct work_struct *data)
@@ -3511,7 +3039,7 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data)
 
 #define IWL_DELAY_NEXT_SCAN (HZ*2)
 
-static void iwl3945_post_associate(struct iwl_priv *priv)
+void iwl3945_post_associate(struct iwl_priv *priv)
 {
 	int rc = 0;
 	struct ieee80211_conf *conf = NULL;
@@ -3536,7 +3064,7 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 	conf = ieee80211_get_hw_conf(priv->hw);
 
 	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl3945_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
 	iwl3945_setup_rxon_timing(priv);
@@ -3569,7 +3097,7 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 
 	}
 
-	iwl3945_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	switch (priv->iw_mode) {
 	case NL80211_IFTYPE_STATION:
@@ -3579,7 +3107,7 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 	case NL80211_IFTYPE_ADHOC:
 
 		priv->assoc_id = 1;
-		iwl3945_add_station(priv, priv->bssid, 0, 0);
+		iwl_add_station(priv, priv->bssid, 0, CMD_SYNC, NULL);
 		iwl3945_sync_sta(priv, IWL_STA_ID,
 				 (priv->band == IEEE80211_BAND_5GHZ) ?
 				 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
@@ -3601,8 +3129,6 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 	priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
 }
 
-static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
-
 /*****************************************************************************
  *
  * mac80211 entry point functions
@@ -3638,16 +3164,11 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
 
 	mutex_unlock(&priv->mutex);
 
-	iwl_rfkill_set_hw_state(priv);
-
 	if (ret)
 		goto out_release_irq;
 
 	IWL_DEBUG_INFO(priv, "Start UP work.\n");
 
-	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
-		return 0;
-
 	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
 	 * mac80211 will not be run successfully. */
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -3726,144 +3247,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
-
-	if (priv->vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
-		return -EOPNOTSUPP;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->vif = conf->vif;
-	priv->iw_mode = conf->type;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211(priv, "Set: %pM\n", conf->mac_addr);
-		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
-	}
-
-	if (iwl_is_ready(priv))
-		iwl3945_set_mode(priv, conf->type);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
-/**
- * iwl3945_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags;
-	int ret = 0;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d\n",
-				conf->channel->hw_value);
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	if (unlikely(!iwl3945_mod_params.disable_hw_scan &&
-		     test_bit(STATUS_SCANNING, &priv->status))) {
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-		set_bit(STATUS_CONF_PENDING, &priv->status);
-		mutex_unlock(&priv->mutex);
-		return 0;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	ch_info = iwl_get_channel_info(priv, conf->channel->band,
-				       conf->channel->hw_value);
-	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_SCAN(priv,
-				"Channel %d [%d] is INVALID for this band.\n",
-				conf->channel->hw_value, conf->channel->band);
-		IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-		spin_unlock_irqrestore(&priv->lock, flags);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	iwl_set_rxon_channel(priv, conf->channel);
-
-	iwl_set_flags_for_band(priv, conf->channel->band);
-
-	/* The list of supported rates and rate mask can be different
-	 * for each phymode; since the phymode may have changed, reset
-	 * the rate mask to what mac80211 lists */
-	iwl_set_rate(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
-	if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
-		iwl3945_hw_channel_switch(priv, conf->channel);
-		goto out;
-	}
-#endif
-
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		if (conf->radio_enabled &&
-		    iwl_radio_kill_sw_enable_radio(priv)) {
-			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
-						 "waiting for uCode\n");
-			goto out;
-		}
-
-		if (!conf->radio_enabled) {
-			iwl_radio_kill_sw_disable_radio(priv);
-			IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-			goto out;
-		}
-	}
-
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF kill\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	iwl_set_rate(priv);
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwl3945_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration\n");
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-out:
-	clear_bit(STATUS_CONF_PENDING, &priv->status);
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-static void iwl3945_config_ap(struct iwl_priv *priv)
+void iwl3945_config_ap(struct iwl_priv *priv)
 {
 	int rc = 0;
 
@@ -3875,7 +3259,7 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
 
 		/* RXON - unassoc (to set timing command) */
 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
+		iwlcore_commit_rxon(priv);
 
 		/* RXON Timing */
 		memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
@@ -3911,8 +3295,8 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
 		}
 		/* restore RXON assoc */
 		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-		iwl3945_add_station(priv, iwl_bcast_addr, 0, 0);
+		iwlcore_commit_rxon(priv);
+		iwl_add_station(priv, iwl_bcast_addr, 0, CMD_SYNC, NULL);
 	}
 	iwl3945_send_beacon_cmd(priv);
 
@@ -3921,189 +3305,6 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
 	 * clear sta table, add BCAST sta... */
 }
 
-static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-					struct ieee80211_if_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	int rc;
-
-	if (conf == NULL)
-		return -EIO;
-
-	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
-		return 0;
-	}
-
-	/* handle this temporarily here */
-	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-	    conf->changed & IEEE80211_IFCC_BEACON) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon)
-			return -ENOMEM;
-		mutex_lock(&priv->mutex);
-		rc = iwl3945_mac_beacon_update(hw, beacon);
-		mutex_unlock(&priv->mutex);
-		if (rc)
-			return rc;
-	}
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->bssid)
-		IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
-
-/*
- * very dubious code was here; the probe filtering flag is never set:
- *
-	if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
-	    !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
- */
-
-	if (priv->iw_mode == NL80211_IFTYPE_AP) {
-		if (!conf->bssid) {
-			conf->bssid = priv->mac_addr;
-			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
-					   conf->bssid);
-		}
-		if (priv->ibss_beacon)
-			dev_kfree_skb(priv->ibss_beacon);
-
-		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (iwl_is_rfkill(priv))
-		goto done;
-
-	if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
-	    !is_multicast_ether_addr(conf->bssid)) {
-		/* If there is currently a HW scan going on in the background
-		 * then we need to cancel it else the RXON below will fail. */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress "
-				    "after 100ms\n");
-			IWL_DEBUG_MAC80211(priv, "leaving:scan abort failed\n");
-			mutex_unlock(&priv->mutex);
-			return -EAGAIN;
-		}
-		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
-
-		/* TODO: Audit driver for usage of these members and see
-		 * if mac80211 deprecates them (priv->bssid looks like it
-		 * shouldn't be there, but I haven't scanned the IBSS code
-		 * to verify) - jpk */
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-
-		if (priv->iw_mode == NL80211_IFTYPE_AP)
-			iwl3945_config_ap(priv);
-		else {
-			rc = iwl3945_commit_rxon(priv);
-			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
-				iwl3945_add_station(priv,
-					priv->active_rxon.bssid_addr, 1, 0);
-		}
-
-	} else {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-	}
-
- done:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
-				     struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	mutex_lock(&priv->mutex);
-
-	if (iwl_is_ready_rf(priv)) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-	}
-	if (priv->vif == conf->vif) {
-		priv->vif = NULL;
-		memset(priv->bssid, 0, ETH_ALEN);
-	}
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-
-static void iwl3945_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			priv->staging_rxon.flags &=
-				~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n",
-				   bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		/* This should never happen as this function should
-		 * never be called from interrupt context. */
-		if (WARN_ON_ONCE(in_interrupt()))
-			return;
-		if (bss_conf->assoc) {
-			priv->assoc_id = bss_conf->aid;
-			priv->beacon_int = bss_conf->beacon_int;
-			priv->timestamp = bss_conf->timestamp;
-			priv->assoc_capability = bss_conf->assoc_capability;
-			priv->power_data.dtim_period = bss_conf->dtim_period;
-			priv->next_scan_jiffies = jiffies +
-					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-			mutex_lock(&priv->mutex);
-			iwl3945_post_associate(priv);
-			mutex_unlock(&priv->mutex);
-		} else {
-			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211(priv,
-					"DISASSOC %d\n", bss_conf->assoc);
-		}
-	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211(priv,
-					"Associated Changes %d\n", changes);
-			iwl3945_send_rxon_assoc(priv);
-	}
-
-}
-
 static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 			       struct ieee80211_vif *vif,
 			       struct ieee80211_sta *sta,
@@ -4126,7 +3327,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	static_key = !iwl_is_associated(priv);
 
 	if (!static_key) {
-		sta_id = iwl3945_hw_find_station(priv, addr);
+		sta_id = iwl_find_station(priv, addr);
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
 					    addr);
@@ -4162,185 +3363,6 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	int q;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
-		return 0;
-	}
-
-	q = AC_NUM - 1 - queue;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
-	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
-	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
-	priv->qos_data.def_qos_parm.ac[q].edca_txop =
-			cpu_to_le16((params->txop * 32));
-
-	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
-	priv->qos_data.qos_active = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-	if (priv->iw_mode == NL80211_IFTYPE_AP)
-		iwl_activate_qos(priv, 1);
-	else if (priv->assoc_id && iwl_is_associated(priv))
-		iwl_activate_qos(priv, 0);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
-static int iwl3945_mac_get_tx_stats(struct ieee80211_hw *hw,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-	int i, avail;
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < AC_NUM; i++) {
-		txq = &priv->txq[i];
-		q = &txq->q;
-		avail = iwl_queue_space(q);
-
-		stats[i].len = q->n_window - avail;
-		stats[i].limit = q->n_window - q->high_mark;
-		stats[i].count = q->n_window;
-
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-	return 0;
-}
-
-static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	iwl_reset_qos(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = 0;
-	priv->assoc_capability = 0;
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = NULL;
-
-	priv->beacon_int = priv->hw->conf.beacon_int;
-	priv->timestamp = 0;
-	if ((priv->iw_mode == NL80211_IFTYPE_STATION))
-		priv->beacon_int = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	*/
-	if (priv->iw_mode != NL80211_IFTYPE_AP) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-	}
-
-	/* Per mac80211.h: This is only used in IBSS mode... */
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-
-		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	iwl_set_rate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-}
-
-static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = skb;
-
-	priv->assoc_id = 0;
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	iwl3945_post_associate(priv);
-
-
-	return 0;
-}
-
 /*****************************************************************************
  *
  * sysfs attributes
@@ -4359,7 +3381,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk
 static ssize_t show_debug_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%08X\n", priv->debug_level);
 }
@@ -4367,7 +3389,7 @@ static ssize_t store_debug_level(struct device *d,
 				struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	int ret;
 
@@ -4388,7 +3410,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
 static ssize_t show_temperature(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -4401,7 +3423,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
 static ssize_t show_tx_power(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
 }
 
@@ -4409,7 +3431,7 @@ static ssize_t store_tx_power(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	char *p = (char *)buf;
 	u32 val;
 
@@ -4427,7 +3449,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
 static ssize_t show_flags(struct device *d,
 			  struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
 }
@@ -4436,7 +3458,7 @@ static ssize_t store_flags(struct device *d,
 			   struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	u32 flags = simple_strtoul(buf, NULL, 0);
 
 	mutex_lock(&priv->mutex);
@@ -4448,7 +3470,7 @@ static ssize_t store_flags(struct device *d,
 			IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
 				       flags);
 			priv->staging_rxon.flags = cpu_to_le32(flags);
-			iwl3945_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -4461,7 +3483,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
 static ssize_t show_filter_flags(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n",
 		le32_to_cpu(priv->active_rxon.filter_flags));
@@ -4471,7 +3493,7 @@ static ssize_t store_filter_flags(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	u32 filter_flags = simple_strtoul(buf, NULL, 0);
 
 	mutex_lock(&priv->mutex);
@@ -4484,7 +3506,7 @@ static ssize_t store_filter_flags(struct device *d,
 				       "0x%04X\n", filter_flags);
 			priv->staging_rxon.filter_flags =
 				cpu_to_le32(filter_flags);
-			iwl3945_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -4624,26 +3646,11 @@ static ssize_t show_power_level(struct device *d,
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "INDEX:%d\t", level);
+	p += sprintf(p, "USER:%d\n", mode);
 	return p - buf + 1;
 }
 
@@ -4756,7 +3763,7 @@ static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
 static ssize_t show_status(struct device *d,
 			   struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 	return sprintf(buf, "0x%08x\n", (int)priv->status);
@@ -4768,10 +3775,11 @@ static ssize_t dump_error_log(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	char *p = (char *)buf;
 
 	if (p[0] == '1')
-		iwl3945_dump_nic_error_log((struct iwl_priv *)d->driver_data);
+		iwl3945_dump_nic_error_log(priv);
 
 	return strnlen(buf, count);
 }
@@ -4782,10 +3790,11 @@ static ssize_t dump_event_log(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	char *p = (char *)buf;
 
 	if (p[0] == '1')
-		iwl3945_dump_nic_event_log((struct iwl_priv *)d->driver_data);
+		iwl3945_dump_nic_event_log(priv);
 
 	return strnlen(buf, count);
 }
@@ -4807,7 +3816,6 @@ static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
 	INIT_WORK(&priv->up, iwl3945_bg_up);
 	INIT_WORK(&priv->restart, iwl3945_bg_restart);
 	INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
-	INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill);
 	INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
 	INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
 	INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
@@ -4864,16 +3872,15 @@ static struct ieee80211_ops iwl3945_hw_ops = {
 	.tx = iwl3945_mac_tx,
 	.start = iwl3945_mac_start,
 	.stop = iwl3945_mac_stop,
-	.add_interface = iwl3945_mac_add_interface,
-	.remove_interface = iwl3945_mac_remove_interface,
-	.config = iwl3945_mac_config,
-	.config_interface = iwl3945_mac_config_interface,
+	.add_interface = iwl_mac_add_interface,
+	.remove_interface = iwl_mac_remove_interface,
+	.config = iwl_mac_config,
 	.configure_filter = iwl_configure_filter,
 	.set_key = iwl3945_mac_set_key,
-	.get_tx_stats = iwl3945_mac_get_tx_stats,
-	.conf_tx = iwl3945_mac_conf_tx,
-	.reset_tsf = iwl3945_mac_reset_tsf,
-	.bss_info_changed = iwl3945_bss_info_changed,
+	.get_tx_stats = iwl_mac_get_tx_stats,
+	.conf_tx = iwl_mac_conf_tx,
+	.reset_tsf = iwl_mac_reset_tsf,
+	.bss_info_changed = iwl_bss_info_changed,
 	.hw_scan = iwl_mac_hw_scan
 };
 
@@ -4886,7 +3893,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	priv->ibss_beacon = NULL;
 
 	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->power_data.lock);
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
@@ -4895,7 +3901,7 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	mutex_init(&priv->mutex);
 
 	/* Clear the driver's (not device's) station table */
-	iwl3945_clear_stations_table(priv);
+	iwl_clear_stations_table(priv);
 
 	priv->data_retry_limit = -1;
 	priv->ieee_channels = NULL;
@@ -4966,13 +3972,13 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 
 	hw->wiphy->custom_regulatory = true;
 
-	hw->wiphy->max_scan_ssids = 1; /* WILL FIX */
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 
-	hw->conf.beacon_int = 100;
-
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
 		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&priv->bands[IEEE80211_BAND_2GHZ];
@@ -5037,6 +4043,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 	priv->cfg = cfg;
 	priv->pci_dev = pdev;
+	priv->inta_mask = CSR_INI_SET_MASK;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	priv->debug_level = iwl3945_mod_params.debug;
@@ -5083,6 +4090,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, 0x41, 0x00);
 
+	/* this spin lock will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->reg_lock);
+
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {
@@ -5128,20 +4140,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
 		priv->cfg->name);
 
-	/***********************************
-	 * 7. Initialize Module Parameters
-	 * **********************************/
-
-	/* Initialize module parameter values here */
-	/* Disable radio (SW RF KILL) via parameter when loading driver */
-	if (iwl3945_mod_params.disable) {
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO(priv, "Radio disabled.\n");
-	}
-
-
 	/***********************
-	 * 8. Setup Services
+	 * 7. Setup Services
 	 * ********************/
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -5150,8 +4150,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	pci_enable_msi(priv->pci_dev);
 
-	err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
-			  DRV_NAME, priv);
+	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+			  IRQF_SHARED, DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
 		goto out_disable_msi;
@@ -5169,7 +4169,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	iwl3945_setup_rx_handlers(priv);
 
 	/*********************************
-	 * 9. Setup and Register mac80211
+	 * 8. Setup and Register mac80211
 	 * *******************************/
 
 	iwl_enable_interrupts(priv);
@@ -5178,12 +4178,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	if (err)
 		goto  out_remove_sysfs;
 
-	err = iwl_rfkill_init(priv);
+	err = iwl_dbgfs_register(priv, DRV_NAME);
 	if (err)
-		IWL_ERR(priv, "Unable to initialize RFKILL system. "
-				  "Ignoring error: %d\n", err);
-	else
-		iwl_rfkill_set_hw_state(priv);
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
 
 	/* Start monitoring the killswitch */
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
@@ -5228,6 +4225,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 
 	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
 
+	iwl_dbgfs_unregister(priv);
+
 	set_bit(STATUS_EXIT_PENDING, &priv->status);
 
 	if (priv->mac80211_registered) {
@@ -5248,7 +4247,6 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 
 	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
 
-	iwl_rfkill_unregister(priv);
 	cancel_delayed_work_sync(&priv->rfkill_poll);
 
 	iwl3945_dealloc_ucode_pci(priv);
@@ -5258,7 +4256,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	iwl3945_hw_txq_ctx_free(priv);
 
 	iwl3945_unset_hw_params(priv);
-	iwl3945_clear_stations_table(priv);
+	iwl_clear_stations_table(priv);
 
 	/*netif_stop_queue(dev); */
 	flush_workqueue(priv->workqueue);
@@ -5286,43 +4284,6 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	ieee80211_free_hw(priv->hw);
 }
 
-#ifdef CONFIG_PM
-
-static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-
-	if (priv->is_open) {
-		set_bit(STATUS_IN_SUSPEND, &priv->status);
-		iwl3945_mac_stop(priv->hw);
-		priv->is_open = 1;
-	}
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-static int iwl3945_pci_resume(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	int ret;
-
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-	pci_restore_state(pdev);
-
-	if (priv->is_open)
-		iwl3945_mac_start(priv->hw);
-
-	clear_bit(STATUS_IN_SUSPEND, &priv->status);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
 
 /*****************************************************************************
  *
@@ -5336,8 +4297,8 @@ static struct pci_driver iwl3945_driver = {
 	.probe = iwl3945_pci_probe,
 	.remove = __devexit_p(iwl3945_pci_remove),
 #ifdef CONFIG_PM
-	.suspend = iwl3945_pci_suspend,
-	.resume = iwl3945_pci_resume,
+	.suspend = iwl_pci_suspend,
+	.resume = iwl_pci_resume,
 #endif
 };
 
@@ -5378,8 +4339,6 @@ MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
 
 module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(disable, iwl3945_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
 MODULE_PARM_DESC(swcrypto,
 		 "using software crypto (default 1 [software])\n");
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
new file mode 100644
index 00000000000..1eccb6df46d
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -0,0 +1,23 @@
+config IWM
+	tristate "Intel Wireless Multicomm 3200 WiFi driver"
+	depends on MMC && WLAN_80211 && EXPERIMENTAL
+	depends on CFG80211
+	select WIRELESS_EXT
+	select FW_LOADER
+
+config IWM_DEBUG
+	bool "Enable full debugging output in iwmc3200wifi"
+	depends on IWM && DEBUG_FS
+	---help---
+	  This option will enable debug tracing and setting for iwm
+
+	  You can set the debug level and module through debugfs. By
+	  default all modules are set to the IWL_DL_ERR level.
+	  To see the list of debug modules and levels, see iwm/debug.h
+
+	  For example, if you want the full MLME debug output:
+	  echo 0xff > /debug/iwm/phyN/debug/mlme
+
+	  Or, if you want the full debug, for all modules:
+	  echo 0xff > /debug/iwm/phyN/debug/level
+	  echo 0xff > /debug/iwm/phyN/debug/modules
diff --git a/drivers/net/wireless/iwmc3200wifi/Makefile b/drivers/net/wireless/iwmc3200wifi/Makefile
new file mode 100644
index 00000000000..927f022545c
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_IWM) := iwmc3200wifi.o
+iwmc3200wifi-objs += main.o netdev.o rx.o tx.o sdio.o hal.o fw.o
+iwmc3200wifi-objs += commands.o wext.o cfg80211.o eeprom.o
+
+iwmc3200wifi-$(CONFIG_IWM_DEBUG) += debugfs.o
diff --git a/drivers/net/wireless/iwmc3200wifi/bus.h b/drivers/net/wireless/iwmc3200wifi/bus.h
new file mode 100644
index 00000000000..836663eec25
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/bus.h
@@ -0,0 +1,57 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __IWM_BUS_H__
+#define __IWM_BUS_H__
+
+#include "iwm.h"
+
+struct iwm_if_ops {
+	int (*enable)(struct iwm_priv *iwm);
+	int (*disable)(struct iwm_priv *iwm);
+	int (*send_chunk)(struct iwm_priv *iwm, u8* buf, int count);
+
+	int (*debugfs_init)(struct iwm_priv *iwm, struct dentry *parent_dir);
+	void (*debugfs_exit)(struct iwm_priv *iwm);
+
+	const char *umac_name;
+	const char *calib_lmac_name;
+	const char *lmac_name;
+};
+
+static inline int iwm_bus_send_chunk(struct iwm_priv *iwm, u8 *buf, int count)
+{
+	return iwm->bus_ops->send_chunk(iwm, buf, count);
+}
+
+static inline int iwm_bus_enable(struct iwm_priv *iwm)
+{
+	return iwm->bus_ops->enable(iwm);
+}
+
+static inline int iwm_bus_disable(struct iwm_priv *iwm)
+{
+	return iwm->bus_ops->disable(iwm);
+}
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
new file mode 100644
index 00000000000..96f714e6e12
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -0,0 +1,409 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+
+#include "iwm.h"
+#include "commands.h"
+#include "cfg80211.h"
+#include "debug.h"
+
+#define RATETAB_ENT(_rate, _rateid, _flags) \
+	{								\
+		.bitrate	= (_rate),				\
+		.hw_value	= (_rateid),				\
+		.flags		= (_flags),				\
+	}
+
+#define CHAN2G(_channel, _freq, _flags) {			\
+	.band			= IEEE80211_BAND_2GHZ,		\
+	.center_freq		= (_freq),			\
+	.hw_value		= (_channel),			\
+	.flags			= (_flags),			\
+	.max_antenna_gain	= 0,				\
+	.max_power		= 30,				\
+}
+
+#define CHAN5G(_channel, _flags) {				\
+	.band			= IEEE80211_BAND_5GHZ,		\
+	.center_freq		= 5000 + (5 * (_channel)),	\
+	.hw_value		= (_channel),			\
+	.flags			= (_flags),			\
+	.max_antenna_gain	= 0,				\
+	.max_power		= 30,				\
+}
+
+static struct ieee80211_rate iwm_rates[] = {
+	RATETAB_ENT(10,  0x1,   0),
+	RATETAB_ENT(20,  0x2,   0),
+	RATETAB_ENT(55,  0x4,   0),
+	RATETAB_ENT(110, 0x8,   0),
+	RATETAB_ENT(60,  0x10,  0),
+	RATETAB_ENT(90,  0x20,  0),
+	RATETAB_ENT(120, 0x40,  0),
+	RATETAB_ENT(180, 0x80,  0),
+	RATETAB_ENT(240, 0x100, 0),
+	RATETAB_ENT(360, 0x200, 0),
+	RATETAB_ENT(480, 0x400, 0),
+	RATETAB_ENT(540, 0x800, 0),
+};
+
+#define iwm_a_rates		(iwm_rates + 4)
+#define iwm_a_rates_size	8
+#define iwm_g_rates		(iwm_rates + 0)
+#define iwm_g_rates_size	12
+
+static struct ieee80211_channel iwm_2ghz_channels[] = {
+	CHAN2G(1, 2412, 0),
+	CHAN2G(2, 2417, 0),
+	CHAN2G(3, 2422, 0),
+	CHAN2G(4, 2427, 0),
+	CHAN2G(5, 2432, 0),
+	CHAN2G(6, 2437, 0),
+	CHAN2G(7, 2442, 0),
+	CHAN2G(8, 2447, 0),
+	CHAN2G(9, 2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+static struct ieee80211_channel iwm_5ghz_a_channels[] = {
+	CHAN5G(34, 0),		CHAN5G(36, 0),
+	CHAN5G(38, 0),		CHAN5G(40, 0),
+	CHAN5G(42, 0),		CHAN5G(44, 0),
+	CHAN5G(46, 0),		CHAN5G(48, 0),
+	CHAN5G(52, 0),		CHAN5G(56, 0),
+	CHAN5G(60, 0),		CHAN5G(64, 0),
+	CHAN5G(100, 0),		CHAN5G(104, 0),
+	CHAN5G(108, 0),		CHAN5G(112, 0),
+	CHAN5G(116, 0),		CHAN5G(120, 0),
+	CHAN5G(124, 0),		CHAN5G(128, 0),
+	CHAN5G(132, 0),		CHAN5G(136, 0),
+	CHAN5G(140, 0),		CHAN5G(149, 0),
+	CHAN5G(153, 0),		CHAN5G(157, 0),
+	CHAN5G(161, 0),		CHAN5G(165, 0),
+	CHAN5G(184, 0),		CHAN5G(188, 0),
+	CHAN5G(192, 0),		CHAN5G(196, 0),
+	CHAN5G(200, 0),		CHAN5G(204, 0),
+	CHAN5G(208, 0),		CHAN5G(212, 0),
+	CHAN5G(216, 0),
+};
+
+static struct ieee80211_supported_band iwm_band_2ghz = {
+	.channels = iwm_2ghz_channels,
+	.n_channels = ARRAY_SIZE(iwm_2ghz_channels),
+	.bitrates = iwm_g_rates,
+	.n_bitrates = iwm_g_rates_size,
+};
+
+static struct ieee80211_supported_band iwm_band_5ghz = {
+	.channels = iwm_5ghz_a_channels,
+	.n_channels = ARRAY_SIZE(iwm_5ghz_a_channels),
+	.bitrates = iwm_a_rates,
+	.n_bitrates = iwm_a_rates_size,
+};
+
+int iwm_cfg80211_inform_bss(struct iwm_priv *iwm)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct iwm_bss_info *bss, *next;
+	struct iwm_umac_notif_bss_info *umac_bss;
+	struct ieee80211_mgmt *mgmt;
+	struct ieee80211_channel *channel;
+	struct ieee80211_supported_band *band;
+	s32 signal;
+	int freq;
+
+	list_for_each_entry_safe(bss, next, &iwm->bss_list, node) {
+		umac_bss = bss->bss;
+		mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf);
+
+		if (umac_bss->band == UMAC_BAND_2GHZ)
+			band = wiphy->bands[IEEE80211_BAND_2GHZ];
+		else if (umac_bss->band == UMAC_BAND_5GHZ)
+			band = wiphy->bands[IEEE80211_BAND_5GHZ];
+		else {
+			IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band);
+			return -EINVAL;
+		}
+
+		freq = ieee80211_channel_to_frequency(umac_bss->channel);
+		channel = ieee80211_get_channel(wiphy, freq);
+		signal = umac_bss->rssi * 100;
+
+		if (!cfg80211_inform_bss_frame(wiphy, channel, mgmt,
+					       le16_to_cpu(umac_bss->frame_len),
+					       signal, GFP_KERNEL))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int iwm_cfg80211_change_iface(struct wiphy *wiphy, int ifindex,
+				     enum nl80211_iftype type, u32 *flags,
+				     struct vif_params *params)
+{
+	struct net_device *ndev;
+	struct wireless_dev *wdev;
+	struct iwm_priv *iwm;
+	u32 old_mode;
+
+	/* we're under RTNL */
+	ndev = __dev_get_by_index(&init_net, ifindex);
+	if (!ndev)
+		return -ENODEV;
+
+	wdev = ndev->ieee80211_ptr;
+	iwm = ndev_to_iwm(ndev);
+	old_mode = iwm->conf.mode;
+
+	switch (type) {
+	case NL80211_IFTYPE_STATION:
+		iwm->conf.mode = UMAC_MODE_BSS;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		iwm->conf.mode = UMAC_MODE_IBSS;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	wdev->iftype = type;
+
+	if ((old_mode == iwm->conf.mode) || !iwm->umac_profile)
+		return 0;
+
+	iwm->umac_profile->mode = cpu_to_le32(iwm->conf.mode);
+
+	if (iwm->umac_profile_active) {
+		int ret = iwm_invalidate_mlme_profile(iwm);
+		if (ret < 0)
+			IWM_ERR(iwm, "Couldn't invalidate profile\n");
+	}
+
+	return 0;
+}
+
+static int iwm_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
+			     struct cfg80211_scan_request *request)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(ndev);
+	int ret;
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status)) {
+		IWM_ERR(iwm, "Scan while device is not ready\n");
+		return -EIO;
+	}
+
+	if (test_bit(IWM_STATUS_SCANNING, &iwm->status)) {
+		IWM_ERR(iwm, "Scanning already\n");
+		return -EAGAIN;
+	}
+
+	if (test_bit(IWM_STATUS_SCAN_ABORTING, &iwm->status)) {
+		IWM_ERR(iwm, "Scanning being aborted\n");
+		return -EAGAIN;
+	}
+
+	set_bit(IWM_STATUS_SCANNING, &iwm->status);
+
+	ret = iwm_scan_ssids(iwm, request->ssids, request->n_ssids);
+	if (ret) {
+		clear_bit(IWM_STATUS_SCANNING, &iwm->status);
+		return ret;
+	}
+
+	iwm->scan_request = request;
+	return 0;
+}
+
+static int iwm_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+	if (changed & WIPHY_PARAM_RTS_THRESHOLD &&
+	    (iwm->conf.rts_threshold != wiphy->rts_threshold)) {
+		int ret;
+
+		iwm->conf.rts_threshold = wiphy->rts_threshold;
+
+		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+					     CFG_RTS_THRESHOLD,
+					     iwm->conf.rts_threshold);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (changed & WIPHY_PARAM_FRAG_THRESHOLD &&
+	    (iwm->conf.frag_threshold != wiphy->frag_threshold)) {
+		int ret;
+
+		iwm->conf.frag_threshold = wiphy->frag_threshold;
+
+		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX,
+					     CFG_FRAG_THRESHOLD,
+					     iwm->conf.frag_threshold);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int iwm_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_ibss_params *params)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+	struct ieee80211_channel *chan = params->channel;
+	struct cfg80211_bss *bss;
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	/* UMAC doesn't support creating IBSS network with specified bssid.
+	 * This should be removed after we have join only mode supported. */
+	if (params->bssid)
+		return -EOPNOTSUPP;
+
+	bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
+				params->ssid, params->ssid_len);
+	if (!bss) {
+		iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len);
+		schedule_timeout_interruptible(2 * HZ);
+		bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
+					params->ssid, params->ssid_len);
+	}
+	/* IBSS join only mode is not supported by UMAC ATM */
+	if (bss) {
+		cfg80211_put_bss(bss);
+		return -EOPNOTSUPP;
+	}
+
+	iwm->channel = ieee80211_frequency_to_channel(chan->center_freq);
+	iwm->umac_profile->ibss.band = chan->band;
+	iwm->umac_profile->ibss.channel = iwm->channel;
+	iwm->umac_profile->ssid.ssid_len = params->ssid_len;
+	memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len);
+
+	if (params->bssid)
+		memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN);
+
+	return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+	if (iwm->umac_profile_active)
+		return iwm_invalidate_mlme_profile(iwm);
+
+	return 0;
+}
+
+static struct cfg80211_ops iwm_cfg80211_ops = {
+	.change_virtual_intf = iwm_cfg80211_change_iface,
+	.scan = iwm_cfg80211_scan,
+	.set_wiphy_params = iwm_cfg80211_set_wiphy_params,
+	.join_ibss = iwm_cfg80211_join_ibss,
+	.leave_ibss = iwm_cfg80211_leave_ibss,
+};
+
+struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev)
+{
+	int ret = 0;
+	struct wireless_dev *wdev;
+
+	/*
+	 * We're trying to have the following memory
+	 * layout:
+	 *
+	 * +-------------------------+
+	 * | struct wiphy	     |
+	 * +-------------------------+
+	 * | struct iwm_priv         |
+	 * +-------------------------+
+	 * | bus private data        |
+	 * | (e.g. iwm_priv_sdio)    |
+	 * +-------------------------+
+	 *
+	 */
+
+	wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+	if (!wdev) {
+		dev_err(dev, "Couldn't allocate wireless device\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	wdev->wiphy = wiphy_new(&iwm_cfg80211_ops,
+				sizeof(struct iwm_priv) + sizeof_bus);
+	if (!wdev->wiphy) {
+		dev_err(dev, "Couldn't allocate wiphy device\n");
+		ret = -ENOMEM;
+		goto out_err_new;
+	}
+
+	set_wiphy_dev(wdev->wiphy, dev);
+	wdev->wiphy->max_scan_ssids = UMAC_WIFI_IF_PROBE_OPTION_MAX;
+	wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+				       BIT(NL80211_IFTYPE_ADHOC);
+	wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &iwm_band_2ghz;
+	wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &iwm_band_5ghz;
+	wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+	ret = wiphy_register(wdev->wiphy);
+	if (ret < 0) {
+		dev_err(dev, "Couldn't register wiphy device\n");
+		goto out_err_register;
+	}
+
+	return wdev;
+
+ out_err_register:
+	wiphy_free(wdev->wiphy);
+
+ out_err_new:
+	kfree(wdev);
+
+	return ERR_PTR(ret);
+}
+
+void iwm_wdev_free(struct iwm_priv *iwm)
+{
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+
+	if (!wdev)
+		return;
+
+	wiphy_unregister(wdev->wiphy);
+	wiphy_free(wdev->wiphy);
+	kfree(wdev);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.h b/drivers/net/wireless/iwmc3200wifi/cfg80211.h
new file mode 100644
index 00000000000..56a34145acb
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.h
@@ -0,0 +1,31 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __IWM_CFG80211_H__
+#define __IWM_CFG80211_H__
+
+int iwm_cfg80211_inform_bss(struct iwm_priv *iwm);
+struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev);
+void iwm_wdev_free(struct iwm_priv *iwm);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
new file mode 100644
index 00000000000..834a7f544e5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -0,0 +1,920 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <linux/ieee80211.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "commands.h"
+#include "debug.h"
+
+static int iwm_send_lmac_ptrough_cmd(struct iwm_priv *iwm,
+				     u8 lmac_cmd_id,
+				     const void *lmac_payload,
+				     u16 lmac_payload_size,
+				     u8 resp)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_LMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_lmac_cmd lmac_cmd;
+
+	lmac_cmd.id = lmac_cmd_id;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_WIFI_PASS_THROUGH;
+	umac_cmd.resp = resp;
+
+	return iwm_hal_send_host_cmd(iwm, &udma_cmd, &umac_cmd, &lmac_cmd,
+				     lmac_payload, lmac_payload_size);
+}
+
+int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
+			 bool resp)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_WIFI_IF_WRAPPER;
+	umac_cmd.resp = resp;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd,
+				     payload, payload_size);
+}
+
+static struct coex_event iwm_sta_xor_prio_tbl[COEX_EVENTS_NUM] =
+{
+	{4, 3, 0, COEX_UNASSOC_IDLE_FLAGS},
+	{4, 3, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{4, 3, 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
+	{4, 3, 0, COEX_CALIBRATION_FLAGS},
+	{4, 3, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+	{4, 3, 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{4, 3, 0, COEX_ASSOCIATED_IDLE_FLAGS},
+	{4, 3, 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
+	{4, 3, 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
+	{4, 3, 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
+	{6, 3, 0, COEX_XOR_RF_ON_FLAGS},
+	{4, 3, 0, COEX_RF_OFF_FLAGS},
+	{6, 6, 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{4, 3, 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
+	{4, 3, 0, COEX_RSRVD1_FLAGS},
+	{4, 3, 0, COEX_RSRVD2_FLAGS}
+};
+
+static struct coex_event iwm_sta_cm_prio_tbl[COEX_EVENTS_NUM] =
+{
+	{1, 1, 0, COEX_UNASSOC_IDLE_FLAGS},
+	{4, 3, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{3, 3, 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
+	{5, 5, 0, COEX_CALIBRATION_FLAGS},
+	{4, 4, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+	{5, 4, 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{4, 4, 0, COEX_ASSOCIATED_IDLE_FLAGS},
+	{4, 4, 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
+	{4, 4, 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
+	{4, 4, 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
+	{1, 1, 0, COEX_RF_ON_FLAGS},
+	{1, 1, 0, COEX_RF_OFF_FLAGS},
+	{6, 6, 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{5, 4, 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
+	{1, 1, 0, COEX_RSRVD1_FLAGS},
+	{1, 1, 0, COEX_RSRVD2_FLAGS}
+};
+
+int iwm_send_prio_table(struct iwm_priv *iwm)
+{
+	struct iwm_coex_prio_table_cmd coex_table_cmd;
+	u32 coex_enabled, mode_enabled;
+
+	memset(&coex_table_cmd, 0, sizeof(struct iwm_coex_prio_table_cmd));
+
+	coex_table_cmd.flags = COEX_FLAGS_STA_TABLE_VALID_MSK;
+
+	switch (iwm->conf.coexist_mode) {
+	case COEX_MODE_XOR:
+	case COEX_MODE_CM:
+		coex_enabled = 1;
+		break;
+	default:
+		coex_enabled = 0;
+		break;
+	}
+
+	switch (iwm->conf.mode) {
+	case UMAC_MODE_BSS:
+	case UMAC_MODE_IBSS:
+		mode_enabled = 1;
+		break;
+	default:
+		mode_enabled = 0;
+		break;
+	}
+
+	if (coex_enabled && mode_enabled) {
+		coex_table_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK |
+					COEX_FLAGS_ASSOC_WAKEUP_UMASK_MSK |
+					COEX_FLAGS_UNASSOC_WAKEUP_UMASK_MSK;
+
+		switch (iwm->conf.coexist_mode) {
+		case COEX_MODE_XOR:
+			memcpy(coex_table_cmd.sta_prio, iwm_sta_xor_prio_tbl,
+			       sizeof(iwm_sta_xor_prio_tbl));
+			break;
+		case COEX_MODE_CM:
+			memcpy(coex_table_cmd.sta_prio, iwm_sta_cm_prio_tbl,
+			       sizeof(iwm_sta_cm_prio_tbl));
+			break;
+		default:
+			IWM_ERR(iwm, "Invalid coex_mode 0x%x\n",
+				iwm->conf.coexist_mode);
+			break;
+		}
+	} else
+		IWM_WARN(iwm, "coexistense disabled\n");
+
+	return iwm_send_lmac_ptrough_cmd(iwm, COEX_PRIORITY_TABLE_CMD,
+				&coex_table_cmd,
+				sizeof(struct iwm_coex_prio_table_cmd), 1);
+}
+
+int iwm_send_init_calib_cfg(struct iwm_priv *iwm, u8 calib_requested)
+{
+	struct iwm_lmac_cal_cfg_cmd cal_cfg_cmd;
+
+	memset(&cal_cfg_cmd, 0, sizeof(struct iwm_lmac_cal_cfg_cmd));
+
+	cal_cfg_cmd.ucode_cfg.init.enable = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.init.start = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.init.send_res = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.flags =
+		cpu_to_le32(CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_AFTER_MSK);
+
+	return iwm_send_lmac_ptrough_cmd(iwm, CALIBRATION_CFG_CMD, &cal_cfg_cmd,
+				sizeof(struct iwm_lmac_cal_cfg_cmd), 1);
+}
+
+int iwm_send_periodic_calib_cfg(struct iwm_priv *iwm, u8 calib_requested)
+{
+	struct iwm_lmac_cal_cfg_cmd cal_cfg_cmd;
+
+	memset(&cal_cfg_cmd, 0, sizeof(struct iwm_lmac_cal_cfg_cmd));
+
+	cal_cfg_cmd.ucode_cfg.periodic.enable = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.periodic.start = cpu_to_le32(calib_requested);
+
+	return iwm_send_lmac_ptrough_cmd(iwm, CALIBRATION_CFG_CMD, &cal_cfg_cmd,
+				sizeof(struct iwm_lmac_cal_cfg_cmd), 0);
+}
+
+int iwm_store_rxiq_calib_result(struct iwm_priv *iwm)
+{
+	struct iwm_calib_rxiq *rxiq;
+	u8 *eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
+	int grplen = sizeof(struct iwm_calib_rxiq_group);
+
+	rxiq = kzalloc(sizeof(struct iwm_calib_rxiq), GFP_KERNEL);
+	if (!rxiq) {
+		IWM_ERR(iwm, "Couldn't alloc memory for RX IQ\n");
+		return -ENOMEM;
+	}
+
+	eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
+	if (IS_ERR(eeprom_rxiq)) {
+		IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+		return PTR_ERR(eeprom_rxiq);
+	}
+
+	iwm->calib_res[SHILOH_PHY_CALIBRATE_RX_IQ_CMD].buf = (u8 *)rxiq;
+	iwm->calib_res[SHILOH_PHY_CALIBRATE_RX_IQ_CMD].size = sizeof(*rxiq);
+
+	rxiq->hdr.opcode = SHILOH_PHY_CALIBRATE_RX_IQ_CMD;
+	rxiq->hdr.first_grp = 0;
+	rxiq->hdr.grp_num = 1;
+	rxiq->hdr.all_data_valid = 1;
+
+	memcpy(&rxiq->group[0], eeprom_rxiq, 4 * grplen);
+	memcpy(&rxiq->group[4], eeprom_rxiq + 6 * grplen, grplen);
+
+	return 0;
+}
+
+int iwm_send_calib_results(struct iwm_priv *iwm)
+{
+	int i, ret = 0;
+
+	for (i = PHY_CALIBRATE_OPCODES_NUM; i < CALIBRATION_CMD_NUM; i++) {
+		if (test_bit(i - PHY_CALIBRATE_OPCODES_NUM,
+			     &iwm->calib_done_map)) {
+			IWM_DBG_CMD(iwm, DBG,
+				    "Send calibration %d result\n", i);
+			ret |= iwm_send_lmac_ptrough_cmd(iwm,
+					REPLY_PHY_CALIBRATION_CMD,
+					iwm->calib_res[i].buf,
+					iwm->calib_res[i].size, 0);
+
+			kfree(iwm->calib_res[i].buf);
+			iwm->calib_res[i].buf = NULL;
+			iwm->calib_res[i].size = 0;
+		}
+	}
+
+	return ret;
+}
+
+int iwm_send_umac_reset(struct iwm_priv *iwm, __le32 reset_flags, bool resp)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_reset reset;
+
+	reset.flags = reset_flags;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_RESET;
+	umac_cmd.resp = resp;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &reset,
+				     sizeof(struct iwm_umac_cmd_reset));
+}
+
+int iwm_umac_set_config_fix(struct iwm_priv *iwm, u16 tbl, u16 key, u32 value)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_set_param_fix param;
+
+	if ((tbl != UMAC_PARAM_TBL_CFG_FIX) &&
+	    (tbl != UMAC_PARAM_TBL_FA_CFG_FIX))
+		return -EINVAL;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_SET_PARAM_FIX;
+	umac_cmd.resp = 0;
+
+	param.tbl = cpu_to_le16(tbl);
+	param.key = cpu_to_le16(key);
+	param.value = cpu_to_le32(value);
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &param,
+				     sizeof(struct iwm_umac_cmd_set_param_fix));
+}
+
+int iwm_umac_set_config_var(struct iwm_priv *iwm, u16 key,
+			    void *payload, u16 payload_size)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_set_param_var *param_hdr;
+	u8 *param;
+	int ret;
+
+	param = kzalloc(payload_size +
+			sizeof(struct iwm_umac_cmd_set_param_var), GFP_KERNEL);
+	if (!param) {
+		IWM_ERR(iwm, "Couldn't allocate param\n");
+		return -ENOMEM;
+	}
+
+	param_hdr = (struct iwm_umac_cmd_set_param_var *)param;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_SET_PARAM_VAR;
+	umac_cmd.resp = 0;
+
+	param_hdr->tbl = cpu_to_le16(UMAC_PARAM_TBL_CFG_VAR);
+	param_hdr->key = cpu_to_le16(key);
+	param_hdr->len = cpu_to_le16(payload_size);
+	memcpy(param + sizeof(struct iwm_umac_cmd_set_param_var),
+	       payload, payload_size);
+
+	ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, param,
+				    sizeof(struct iwm_umac_cmd_set_param_var) +
+				    payload_size);
+	kfree(param);
+
+	return ret;
+}
+
+int iwm_send_umac_config(struct iwm_priv *iwm,
+			 __le32 reset_flags)
+{
+	int ret;
+
+	/* Use UMAC default values */
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_POWER_INDEX, iwm->conf.power_index);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX,
+				      CFG_FRAG_THRESHOLD,
+				      iwm->conf.frag_threshold);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_RTS_THRESHOLD,
+				      iwm->conf.rts_threshold);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_CTS_TO_SELF, iwm->conf.cts_to_self);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_COEX_MODE, iwm->conf.coexist_mode);
+	if (ret < 0)
+		return ret;
+
+	/*
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_ASSOCIATION_TIMEOUT,
+				      iwm->conf.assoc_timeout);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_ROAM_TIMEOUT,
+				      iwm->conf.roam_timeout);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_WIRELESS_MODE,
+				      WIRELESS_MODE_11A | WIRELESS_MODE_11G);
+	if (ret < 0)
+		return ret;
+	*/
+
+	ret = iwm_umac_set_config_var(iwm, CFG_NET_ADDR,
+				      iwm_to_ndev(iwm)->dev_addr, ETH_ALEN);
+	if (ret < 0)
+		return ret;
+
+	/* UMAC PM static configurations */
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_LEGACY_RX_TIMEOUT, 0x12C);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_LEGACY_TX_TIMEOUT, 0x15E);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_CTRL_FLAGS, 0x30001);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_KEEP_ALIVE_IN_BEACONS, 0x80);
+	if (ret < 0)
+		return ret;
+
+	/* reset UMAC */
+	ret = iwm_send_umac_reset(iwm, reset_flags, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id)
+{
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_tx_info *tx_info = skb_to_tx_info(skb);
+
+	udma_cmd.eop = 1; /* always set eop for non-concatenated Tx */
+	udma_cmd.credit_group = pool_id;
+	udma_cmd.ra_tid = tx_info->sta << 4 | tx_info->tid;
+	udma_cmd.lmac_offset = 0;
+
+	umac_cmd.id = REPLY_TX;
+	umac_cmd.color = tx_info->color;
+	umac_cmd.resp = 0;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd,
+				     skb->data, skb->len);
+}
+
+static int iwm_target_read(struct iwm_priv *iwm, __le32 address,
+			   u8 *response, u32 resp_size)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	struct iwm_nonwifi_cmd *cmd;
+	u16 seq_num;
+	int ret = 0;
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_READ;
+	target_cmd.addr = address;
+	target_cmd.op1_sz = cpu_to_le32(resp_size);
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 1;
+	target_cmd.eop = 1;
+
+	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't send READ command\n");
+
+	/* When succeding, the send_target routine returns the seq number */
+	seq_num = ret;
+
+	ret = wait_event_interruptible_timeout(iwm->nonwifi_queue,
+		(cmd = iwm_get_pending_nonwifi_cmd(iwm, seq_num,
+					  UMAC_HDI_OUT_OPCODE_READ)) != NULL,
+					       2 * HZ);
+
+	if (!ret) {
+		IWM_ERR(iwm, "Didn't receive a target READ answer\n");
+		return ret;
+	}
+
+	memcpy(response, cmd->buf.hdr + sizeof(struct iwm_udma_in_hdr),
+	       resp_size);
+
+	kfree(cmd);
+
+	return ret;
+}
+
+int iwm_read_mac(struct iwm_priv *iwm, u8 *mac)
+{
+	int ret;
+	u8 mac_align[ALIGN(ETH_ALEN, 8)];
+
+	ret = iwm_target_read(iwm, cpu_to_le32(WICO_MAC_ADDRESS_ADDR),
+			      mac_align, sizeof(mac_align));
+	if (ret < 0)
+		return ret;
+
+	if (is_valid_ether_addr(mac_align))
+		memcpy(mac, mac_align, ETH_ALEN);
+	else {
+		IWM_ERR(iwm, "Invalid EEPROM MAC\n");
+		memcpy(mac, iwm->conf.mac_addr, ETH_ALEN);
+		get_random_bytes(&mac[3], 3);
+	}
+
+	return 0;
+}
+
+int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx)
+{
+	struct iwm_umac_tx_key_id tx_key_id;
+
+	if (!iwm->default_key || !iwm->default_key->in_use)
+		return -EINVAL;
+
+	tx_key_id.hdr.oid = UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID;
+	tx_key_id.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_tx_key_id) -
+					     sizeof(struct iwm_umac_wifi_if));
+
+	tx_key_id.key_idx = key_idx;
+
+	return iwm_send_wifi_if_cmd(iwm, &tx_key_id, sizeof(tx_key_id), 1);
+}
+
+static int iwm_check_profile(struct iwm_priv *iwm)
+{
+	if (!iwm->umac_profile_active)
+		return -EAGAIN;
+
+	if (iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_WEP_40 &&
+	    iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_WEP_104 &&
+	    iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_TKIP &&
+	    iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_CCMP) {
+		IWM_ERR(iwm, "Wrong unicast cipher: 0x%x\n",
+			iwm->umac_profile->sec.ucast_cipher);
+		return -EAGAIN;
+	}
+
+	if (iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_WEP_40 &&
+	    iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_WEP_104 &&
+	    iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_TKIP &&
+	    iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_CCMP) {
+		IWM_ERR(iwm, "Wrong multicast cipher: 0x%x\n",
+			iwm->umac_profile->sec.mcast_cipher);
+		return -EAGAIN;
+	}
+
+	if ((iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_40 ||
+	     iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_104) &&
+	    (iwm->umac_profile->sec.ucast_cipher !=
+	     iwm->umac_profile->sec.mcast_cipher)) {
+		IWM_ERR(iwm, "Unicast and multicast ciphers differ for WEP\n");
+	}
+
+	return 0;
+}
+
+int iwm_set_key(struct iwm_priv *iwm, bool remove, bool set_tx_key,
+		struct iwm_key *key)
+{
+	int ret;
+	u8 cmd[64], *sta_addr, *key_data, key_len;
+	s8 key_idx;
+	u16 cmd_size = 0;
+	struct iwm_umac_key_hdr *key_hdr = &key->hdr;
+	struct iwm_umac_key_wep40 *wep40 = (struct iwm_umac_key_wep40 *)cmd;
+	struct iwm_umac_key_wep104 *wep104 = (struct iwm_umac_key_wep104 *)cmd;
+	struct iwm_umac_key_tkip *tkip = (struct iwm_umac_key_tkip *)cmd;
+	struct iwm_umac_key_ccmp *ccmp = (struct iwm_umac_key_ccmp *)cmd;
+
+	if (set_tx_key)
+		iwm->default_key = key;
+
+	/*
+	 * We check if our current profile is valid.
+	 * If not, we dont push the key, we just cache them,
+	 * so that with the next siwsessid call, the keys
+	 * will be actually pushed.
+	 */
+	if (!remove) {
+		ret = iwm_check_profile(iwm);
+		if (ret < 0)
+			return ret;
+	}
+
+	sta_addr = key->hdr.mac;
+	key_data = key->key;
+	key_len = key->key_len;
+	key_idx = key->hdr.key_idx;
+
+	if (!remove) {
+		IWM_DBG_WEXT(iwm, DBG, "key_idx:%d set tx key:%d\n",
+			     key_idx, set_tx_key);
+		IWM_DBG_WEXT(iwm, DBG, "key_len:%d\n", key_len);
+		IWM_DBG_WEXT(iwm, DBG, "MAC:%pM, idx:%d, multicast:%d\n",
+		       key_hdr->mac, key_hdr->key_idx, key_hdr->multicast);
+
+		IWM_DBG_WEXT(iwm, DBG, "profile: mcast:0x%x, ucast:0x%x\n",
+			     iwm->umac_profile->sec.mcast_cipher,
+			     iwm->umac_profile->sec.ucast_cipher);
+		IWM_DBG_WEXT(iwm, DBG, "profile: auth_type:0x%x, flags:0x%x\n",
+			     iwm->umac_profile->sec.auth_type,
+			     iwm->umac_profile->sec.flags);
+
+		switch (key->alg) {
+		case UMAC_CIPHER_TYPE_WEP_40:
+			wep40->hdr.oid = UMAC_WIFI_IF_CMD_ADD_WEP40_KEY;
+			wep40->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_wep40) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&wep40->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+			memcpy(wep40->key, key_data, key_len);
+			wep40->static_key = 1;
+
+			cmd_size = sizeof(struct iwm_umac_key_wep40);
+			break;
+
+		case UMAC_CIPHER_TYPE_WEP_104:
+			wep104->hdr.oid = UMAC_WIFI_IF_CMD_ADD_WEP104_KEY;
+			wep104->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_wep104) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&wep104->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+			memcpy(wep104->key, key_data, key_len);
+			wep104->static_key = 1;
+
+			cmd_size = sizeof(struct iwm_umac_key_wep104);
+			break;
+
+		case UMAC_CIPHER_TYPE_CCMP:
+			key_hdr->key_idx++;
+			ccmp->hdr.oid = UMAC_WIFI_IF_CMD_ADD_CCMP_KEY;
+			ccmp->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_ccmp) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&ccmp->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+
+			memcpy(ccmp->key, key_data, key_len);
+
+			if (key->flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+				memcpy(ccmp->iv_count, key->rx_seq, 6);
+
+			cmd_size = sizeof(struct iwm_umac_key_ccmp);
+			break;
+
+		case UMAC_CIPHER_TYPE_TKIP:
+			key_hdr->key_idx++;
+			tkip->hdr.oid = UMAC_WIFI_IF_CMD_ADD_TKIP_KEY;
+			tkip->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_tkip) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&tkip->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+
+			memcpy(tkip->tkip_key, key_data, IWM_TKIP_KEY_SIZE);
+			memcpy(tkip->mic_tx_key, key_data + IWM_TKIP_KEY_SIZE,
+			       IWM_TKIP_MIC_SIZE);
+			memcpy(tkip->mic_rx_key,
+			       key_data + IWM_TKIP_KEY_SIZE + IWM_TKIP_MIC_SIZE,
+			       IWM_TKIP_MIC_SIZE);
+
+			if (key->flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+				memcpy(ccmp->iv_count, key->rx_seq, 6);
+
+			cmd_size = sizeof(struct iwm_umac_key_tkip);
+			break;
+
+		default:
+			return -ENOTSUPP;
+		}
+
+		if ((key->alg == UMAC_CIPHER_TYPE_CCMP) ||
+		    (key->alg == UMAC_CIPHER_TYPE_TKIP))
+			/*
+			 * UGLY_UGLY_UGLY
+			 * Copied HACK from the MWG driver.
+			 * Without it, the key is set before the second
+			 * EAPOL frame is sent, and the latter is thus
+			 * encrypted.
+			 */
+			schedule_timeout_interruptible(usecs_to_jiffies(300));
+
+		ret =  iwm_send_wifi_if_cmd(iwm, cmd, cmd_size, 1);
+		if (ret < 0)
+			goto err;
+
+		/*
+		 * We need a default key only if it is set and
+		 * if we're doing WEP.
+		 */
+		if (iwm->default_key == key &&
+			((key->alg == UMAC_CIPHER_TYPE_WEP_40) ||
+			 (key->alg == UMAC_CIPHER_TYPE_WEP_104))) {
+			ret = iwm_set_tx_key(iwm, key_idx);
+			if (ret < 0)
+				goto err;
+		}
+	} else {
+		struct iwm_umac_key_remove key_remove;
+
+		key_remove.hdr.oid = UMAC_WIFI_IF_CMD_REMOVE_KEY;
+		key_remove.hdr.buf_size =
+			cpu_to_le16(sizeof(struct iwm_umac_key_remove) -
+				    sizeof(struct iwm_umac_wifi_if));
+		memcpy(&key_remove.key_hdr, key_hdr,
+		       sizeof(struct iwm_umac_key_hdr));
+
+		ret =  iwm_send_wifi_if_cmd(iwm, &key_remove,
+					    sizeof(struct iwm_umac_key_remove),
+					    1);
+		if (ret < 0)
+			return ret;
+
+		iwm->keys[key_idx].in_use = 0;
+	}
+
+	return 0;
+
+ err:
+	kfree(key);
+	return ret;
+}
+
+
+int iwm_send_mlme_profile(struct iwm_priv *iwm)
+{
+	int ret, i;
+	struct iwm_umac_profile profile;
+
+	memcpy(&profile, iwm->umac_profile, sizeof(profile));
+
+	profile.hdr.oid = UMAC_WIFI_IF_CMD_SET_PROFILE;
+	profile.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_profile) -
+					   sizeof(struct iwm_umac_wifi_if));
+
+	ret = iwm_send_wifi_if_cmd(iwm, &profile, sizeof(profile), 1);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Send profile command failed\n");
+		return ret;
+	}
+
+	/* Wait for the profile to be active */
+	ret = wait_event_interruptible_timeout(iwm->mlme_queue,
+					       iwm->umac_profile_active == 1,
+					       3 * HZ);
+	if (!ret)
+		return -EBUSY;
+
+
+	for (i = 0; i < IWM_NUM_KEYS; i++)
+		if (iwm->keys[i].in_use) {
+			int default_key = 0;
+			struct iwm_key *key = &iwm->keys[i];
+
+			if (key == iwm->default_key)
+				default_key = 1;
+
+			/* Wait for the profile before sending the keys */
+			wait_event_interruptible_timeout(iwm->mlme_queue,
+			     (test_bit(IWM_STATUS_ASSOCIATING, &iwm->status) ||
+			      test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)),
+							 3 * HZ);
+
+			ret = iwm_set_key(iwm, 0, default_key, key);
+			if (ret < 0)
+				return ret;
+		}
+
+	return 0;
+}
+
+int iwm_invalidate_mlme_profile(struct iwm_priv *iwm)
+{
+	int ret;
+	struct iwm_umac_invalidate_profile invalid;
+
+	invalid.hdr.oid = UMAC_WIFI_IF_CMD_INVALIDATE_PROFILE;
+	invalid.hdr.buf_size =
+		cpu_to_le16(sizeof(struct iwm_umac_invalidate_profile) -
+			    sizeof(struct iwm_umac_wifi_if));
+
+	invalid.reason = WLAN_REASON_UNSPECIFIED;
+
+	ret = iwm_send_wifi_if_cmd(iwm, &invalid, sizeof(invalid), 1);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_event_interruptible_timeout(iwm->mlme_queue,
+				 (iwm->umac_profile_active == 0),
+					       2 * HZ);
+	if (!ret)
+		return -EBUSY;
+
+	return 0;
+}
+
+int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_stats_req stats_req;
+
+	stats_req.flags = cpu_to_le32(flags);
+
+	umac_cmd.id = UMAC_CMD_OPCODE_STATISTIC_REQUEST;
+	umac_cmd.resp = 0;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &stats_req,
+				     sizeof(struct iwm_umac_cmd_stats_req));
+}
+
+int iwm_send_umac_channel_list(struct iwm_priv *iwm)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_get_channel_list *ch_list;
+	int size = sizeof(struct iwm_umac_cmd_get_channel_list) +
+		   sizeof(struct iwm_umac_channel_info) * 4;
+	int ret;
+
+	ch_list = kzalloc(size, GFP_KERNEL);
+	if (!ch_list) {
+		IWM_ERR(iwm, "Couldn't allocate channel list cmd\n");
+		return -ENOMEM;
+	}
+
+	ch_list->ch[0].band = UMAC_BAND_2GHZ;
+	ch_list->ch[0].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[0].flags = UMAC_CHANNEL_FLAG_VALID;
+
+	ch_list->ch[1].band = UMAC_BAND_5GHZ;
+	ch_list->ch[1].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[1].flags = UMAC_CHANNEL_FLAG_VALID;
+
+	ch_list->ch[2].band = UMAC_BAND_2GHZ;
+	ch_list->ch[2].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[2].flags = UMAC_CHANNEL_FLAG_VALID | UMAC_CHANNEL_FLAG_IBSS;
+
+	ch_list->ch[3].band = UMAC_BAND_5GHZ;
+	ch_list->ch[3].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[3].flags = UMAC_CHANNEL_FLAG_VALID | UMAC_CHANNEL_FLAG_IBSS;
+
+	ch_list->count = cpu_to_le16(4);
+
+	umac_cmd.id = UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST;
+	umac_cmd.resp = 1;
+
+	ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, ch_list, size);
+
+	kfree(ch_list);
+
+	return ret;
+}
+
+int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
+		   int ssid_num)
+{
+	struct iwm_umac_cmd_scan_request req;
+	int i, ret;
+
+	memset(&req, 0, sizeof(struct iwm_umac_cmd_scan_request));
+
+	req.hdr.oid = UMAC_WIFI_IF_CMD_SCAN_REQUEST;
+	req.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_cmd_scan_request)
+				       - sizeof(struct iwm_umac_wifi_if));
+	req.type = UMAC_WIFI_IF_SCAN_TYPE_USER;
+	req.timeout = 2;
+	req.seq_num = iwm->scan_id;
+	req.ssid_num = min(ssid_num, UMAC_WIFI_IF_PROBE_OPTION_MAX);
+
+	for (i = 0; i < req.ssid_num; i++) {
+		memcpy(req.ssids[i].ssid, ssids[i].ssid, ssids[i].ssid_len);
+		req.ssids[i].ssid_len = ssids[i].ssid_len;
+	}
+
+	ret = iwm_send_wifi_if_cmd(iwm, &req, sizeof(req), 0);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't send scan request\n");
+		return ret;
+	}
+
+	iwm->scan_id = iwm->scan_id++ % IWM_SCAN_ID_MAX;
+
+	return 0;
+}
+
+int iwm_scan_one_ssid(struct iwm_priv *iwm, u8 *ssid, int ssid_len)
+{
+	struct cfg80211_ssid one_ssid;
+
+	if (test_and_set_bit(IWM_STATUS_SCANNING, &iwm->status))
+		return 0;
+
+	one_ssid.ssid_len = min(ssid_len, IEEE80211_MAX_SSID_LEN);
+	memcpy(&one_ssid.ssid, ssid, one_ssid.ssid_len);
+
+	return iwm_scan_ssids(iwm, &one_ssid, 1);
+}
+
+int iwm_target_reset(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_REBOOT;
+	target_cmd.addr = 0;
+	target_cmd.op1_sz = 0;
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 0;
+	target_cmd.eop = 1;
+
+	return iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
new file mode 100644
index 00000000000..36b13a13059
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -0,0 +1,419 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_COMMANDS_H__
+#define __IWM_COMMANDS_H__
+
+#include <linux/ieee80211.h>
+
+#define IWM_BARKER_REBOOT_NOTIFICATION	0xF
+#define IWM_ACK_BARKER_NOTIFICATION	0x10
+
+/* UMAC commands */
+#define UMAC_RST_CTRL_FLG_LARC_CLK_EN	0x0001
+#define UMAC_RST_CTRL_FLG_LARC_RESET	0x0002
+#define UMAC_RST_CTRL_FLG_FUNC_RESET	0x0004
+#define UMAC_RST_CTRL_FLG_DEV_RESET	0x0008
+#define UMAC_RST_CTRL_FLG_WIFI_CORE_EN	0x0010
+#define UMAC_RST_CTRL_FLG_WIFI_LINK_EN	0x0040
+#define UMAC_RST_CTRL_FLG_WIFI_MLME_EN	0x0080
+#define UMAC_RST_CTRL_FLG_NVM_RELOAD	0x0100
+
+struct iwm_umac_cmd_reset {
+	__le32 flags;
+} __attribute__ ((packed));
+
+#define UMAC_PARAM_TBL_ORD_FIX    0x0
+#define UMAC_PARAM_TBL_ORD_VAR    0x1
+#define UMAC_PARAM_TBL_CFG_FIX    0x2
+#define UMAC_PARAM_TBL_CFG_VAR    0x3
+#define UMAC_PARAM_TBL_BSS_TRK    0x4
+#define UMAC_PARAM_TBL_FA_CFG_FIX 0x5
+#define UMAC_PARAM_TBL_STA        0x6
+#define UMAC_PARAM_TBL_CHN        0x7
+#define UMAC_PARAM_TBL_STATISTICS 0x8
+
+/* fast access table */
+enum {
+	CFG_FRAG_THRESHOLD = 0,
+	CFG_FRAME_RETRY_LIMIT,
+	CFG_OS_QUEUE_UTIL_TH,
+	CFG_RX_FILTER,
+	/* <-- LAST --> */
+	FAST_ACCESS_CFG_TBL_FIX_LAST
+};
+
+/* fixed size table */
+enum {
+	CFG_POWER_INDEX = 0,
+	CFG_PM_LEGACY_RX_TIMEOUT,
+	CFG_PM_LEGACY_TX_TIMEOUT,
+	CFG_PM_CTRL_FLAGS,
+	CFG_PM_KEEP_ALIVE_IN_BEACONS,
+	CFG_BT_ON_THRESHOLD,
+	CFG_RTS_THRESHOLD,
+	CFG_CTS_TO_SELF,
+	CFG_COEX_MODE,
+	CFG_WIRELESS_MODE,
+	CFG_ASSOCIATION_TIMEOUT,
+	CFG_ROAM_TIMEOUT,
+	CFG_CAPABILITY_SUPPORTED_RATES,
+	CFG_SCAN_ALLOWED_UNASSOC_FLAGS,
+	CFG_SCAN_ALLOWED_MAIN_ASSOC_FLAGS,
+	CFG_SCAN_ALLOWED_PAN_ASSOC_FLAGS,
+	CFG_SCAN_INTERNAL_PERIODIC_ENABLED,
+	CFG_SCAN_IMM_INTERNAL_PERIODIC_SCAN_ON_INIT,
+	CFG_SCAN_DEFAULT_PERIODIC_FREQ_SEC,
+	CFG_SCAN_NUM_PASSIVE_CHAN_PER_PARTIAL_SCAN,
+	CFG_TLC_SUPPORTED_TX_HT_RATES,
+	CFG_TLC_SUPPORTED_TX_RATES,
+	CFG_TLC_VALID_ANTENNA,
+	CFG_TLC_SPATIAL_STREAM_SUPPORTED,
+	CFG_TLC_RETRY_PER_RATE,
+	CFG_TLC_RETRY_PER_HT_RATE,
+	CFG_TLC_FIXED_RATE,
+	CFG_TLC_FIXED_RATE_FLAGS,
+	CFG_TLC_CONTROL_FLAGS,
+	CFG_TLC_SR_MIN_FAIL,
+	CFG_TLC_SR_MIN_PASS,
+	CFG_TLC_HT_STAY_IN_COL_PASS_THRESH,
+	CFG_TLC_HT_STAY_IN_COL_FAIL_THRESH,
+	CFG_TLC_LEGACY_STAY_IN_COL_PASS_THRESH,
+	CFG_TLC_LEGACY_STAY_IN_COL_FAIL_THRESH,
+	CFG_TLC_HT_FLUSH_STATS_PACKETS,
+	CFG_TLC_LEGACY_FLUSH_STATS_PACKETS,
+	CFG_TLC_LEGACY_FLUSH_STATS_MS,
+	CFG_TLC_HT_FLUSH_STATS_MS,
+	CFG_TLC_STAY_IN_COL_TIME_OUT,
+	CFG_TLC_AGG_SHORT_LIM,
+	CFG_TLC_AGG_LONG_LIM,
+	CFG_TLC_HT_SR_NO_DECREASE,
+	CFG_TLC_LEGACY_SR_NO_DECREASE,
+	CFG_TLC_SR_FORCE_DECREASE,
+	CFG_TLC_SR_ALLOW_INCREASE,
+	CFG_TLC_AGG_SET_LONG,
+	CFG_TLC_AUTO_AGGREGATION,
+	CFG_TLC_AGG_THRESHOLD,
+	CFG_TLC_TID_LOAD_THRESHOLD,
+	CFG_TLC_BLOCK_ACK_TIMEOUT,
+	CFG_TLC_NO_BA_COUNTED_AS_ONE,
+	CFG_TLC_NUM_BA_STREAMS_ALLOWED,
+	CFG_TLC_NUM_BA_STREAMS_PRESENT,
+	CFG_TLC_RENEW_ADDBA_DELAY,
+	CFG_TLC_NUM_OF_MULTISEC_TO_COUN_LOAD,
+	CFG_TLC_IS_STABLE_IN_HT,
+	CFG_RLC_CHAIN_CTRL,
+	CFG_TRK_TABLE_OP_MODE,
+	CFG_TRK_TABLE_RSSI_THRESHOLD,
+	CFG_TX_PWR_TARGET, /* Used By xVT */
+	CFG_TX_PWR_LIMIT_USR,
+	CFG_TX_PWR_LIMIT_BSS, /* 11d limit */
+	CFG_TX_PWR_LIMIT_BSS_CONSTRAINT, /* 11h constraint */
+	CFG_TX_PWR_MODE,
+	CFG_MLME_DBG_NOTIF_BLOCK,
+	CFG_BT_OFF_BECONS_INTERVALS,
+	CFG_BT_FRAG_DURATION,
+
+	/* <-- LAST --> */
+	CFG_TBL_FIX_LAST
+};
+
+/* variable size table */
+enum {
+	CFG_NET_ADDR = 0,
+	CFG_PROFILE,
+	/* <-- LAST --> */
+	CFG_TBL_VAR_LAST
+};
+
+struct iwm_umac_cmd_set_param_fix {
+	__le16 tbl;
+	__le16 key;
+	__le32 value;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_set_param_var {
+	__le16 tbl;
+	__le16 key;
+	__le16 len;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_get_param {
+	__le16 tbl;
+	__le16 key;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_get_param_resp {
+	__le16 tbl;
+	__le16 key;
+	__le16 len;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_eeprom_proxy_hdr {
+	__le32 type;
+	__le32 offset;
+	__le32 len;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_eeprom_proxy {
+	struct iwm_umac_cmd_eeprom_proxy_hdr hdr;
+	u8 buf[0];
+} __attribute__ ((packed));
+
+#define IWM_UMAC_CMD_EEPROM_TYPE_READ       0x1
+#define IWM_UMAC_CMD_EEPROM_TYPE_WRITE      0x2
+
+#define UMAC_CHANNEL_FLAG_VALID		BIT(0)
+#define UMAC_CHANNEL_FLAG_IBSS		BIT(1)
+#define UMAC_CHANNEL_FLAG_ACTIVE	BIT(3)
+#define UMAC_CHANNEL_FLAG_RADAR		BIT(4)
+#define UMAC_CHANNEL_FLAG_DFS		BIT(7)
+
+struct iwm_umac_channel_info {
+	u8 band;
+	u8 type;
+	u8 reserved;
+	u8 flags;
+	__le32 channels_mask;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_get_channel_list {
+	__le16 count;
+	__le16 reserved;
+	struct iwm_umac_channel_info ch[0];
+} __attribute__ ((packed));
+
+
+/* UMAC WiFi interface commands */
+
+/* Coexistence mode */
+#define COEX_MODE_SA  0x1
+#define COEX_MODE_XOR 0x2
+#define COEX_MODE_CM  0x3
+#define COEX_MODE_MAX 0x4
+
+/* Wireless mode */
+#define WIRELESS_MODE_11A  0x1
+#define WIRELESS_MODE_11G  0x2
+
+#define UMAC_PROFILE_EX_IE_REQUIRED	0x1
+#define UMAC_PROFILE_QOS_ALLOWED	0x2
+
+/* Scanning */
+#define UMAC_WIFI_IF_PROBE_OPTION_MAX        10
+
+#define UMAC_WIFI_IF_SCAN_TYPE_USER          0x0
+#define UMAC_WIFI_IF_SCAN_TYPE_UMAC_RESERVED 0x1
+#define UMAC_WIFI_IF_SCAN_TYPE_HOST_PERIODIC 0x2
+#define UMAC_WIFI_IF_SCAN_TYPE_MAX           0x3
+
+struct iwm_umac_ssid {
+	u8 ssid_len;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_scan_request {
+	struct iwm_umac_wifi_if hdr;
+	__le32 type; /* UMAC_WIFI_IF_SCAN_TYPE_* */
+	u8 ssid_num;
+	u8 seq_num;
+	u8 timeout; /* In seconds */
+	u8 reserved;
+	struct iwm_umac_ssid ssids[UMAC_WIFI_IF_PROBE_OPTION_MAX];
+} __attribute__ ((packed));
+
+#define UMAC_CIPHER_TYPE_NONE		0xFF
+#define UMAC_CIPHER_TYPE_USE_GROUPCAST	0x00
+#define UMAC_CIPHER_TYPE_WEP_40		0x01
+#define UMAC_CIPHER_TYPE_WEP_104	0x02
+#define UMAC_CIPHER_TYPE_TKIP		0x04
+#define UMAC_CIPHER_TYPE_CCMP		0x08
+
+/* Supported authentication types - bitmap */
+#define UMAC_AUTH_TYPE_OPEN		0x00
+#define UMAC_AUTH_TYPE_LEGACY_PSK	0x01
+#define UMAC_AUTH_TYPE_8021X		0x02
+#define UMAC_AUTH_TYPE_RSNA_PSK		0x04
+
+/* iwm_umac_security.flag is WPA supported -- bits[0:0] */
+#define UMAC_SEC_FLG_WPA_ON_POS		0
+#define UMAC_SEC_FLG_WPA_ON_SEED	1
+#define UMAC_SEC_FLG_WPA_ON_MSK (UMAC_SEC_FLG_WPA_ON_SEED << \
+				 UMAC_SEC_FLG_WPA_ON_POS)
+
+/* iwm_umac_security.flag is WPA2 supported -- bits [1:1] */
+#define UMAC_SEC_FLG_RSNA_ON_POS	1
+#define UMAC_SEC_FLG_RSNA_ON_SEED	1
+#define UMAC_SEC_FLG_RSNA_ON_MSK        (UMAC_SEC_FLG_RSNA_ON_SEED << \
+					 UMAC_SEC_FLG_RSNA_ON_POS)
+
+/* iwm_umac_security.flag is WSC mode on -- bits [2:2] */
+#define UMAC_SEC_FLG_WSC_ON_POS		2
+#define UMAC_SEC_FLG_WSC_ON_SEED	1
+
+/* Legacy profile can use only WEP40 and WEP104 for encryption and
+ * OPEN or PSK for authentication */
+#define UMAC_SEC_FLG_LEGACY_PROFILE	0
+
+struct iwm_umac_security {
+	u8 auth_type;
+	u8 ucast_cipher;
+	u8 mcast_cipher;
+	u8 flags;
+} __attribute__ ((packed));
+
+struct iwm_umac_ibss {
+	u8 beacon_interval;	/* in millisecond */
+	u8 atim;		/* in millisecond */
+	s8 join_only;
+	u8 band;
+	u8 channel;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+#define UMAC_MODE_BSS	0
+#define UMAC_MODE_IBSS	1
+
+#define UMAC_BSSID_MAX	4
+
+struct iwm_umac_profile {
+	struct iwm_umac_wifi_if hdr;
+	__le32 mode;
+	struct iwm_umac_ssid ssid;
+	u8 bssid[UMAC_BSSID_MAX][ETH_ALEN];
+	struct iwm_umac_security sec;
+	struct iwm_umac_ibss ibss;
+	__le32 channel_2ghz;
+	__le32 channel_5ghz;
+	__le16 flags;
+	u8 wireless_mode;
+	u8 bss_num;
+} __attribute__ ((packed));
+
+struct iwm_umac_invalidate_profile {
+	struct iwm_umac_wifi_if hdr;
+	u8 reason;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+/* Encryption key commands */
+struct iwm_umac_key_wep40 {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 key[WLAN_KEY_LEN_WEP40];
+	u8 static_key;
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct iwm_umac_key_wep104 {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 key[WLAN_KEY_LEN_WEP104];
+	u8 static_key;
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+#define IWM_TKIP_KEY_SIZE 16
+#define IWM_TKIP_MIC_SIZE 8
+struct iwm_umac_key_tkip {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 iv_count[6];
+	u8 reserved[2];
+	u8 tkip_key[IWM_TKIP_KEY_SIZE];
+	u8 mic_rx_key[IWM_TKIP_MIC_SIZE];
+	u8 mic_tx_key[IWM_TKIP_MIC_SIZE];
+} __attribute__ ((packed));
+
+struct iwm_umac_key_ccmp {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 iv_count[6];
+	u8 reserved[2];
+	u8 key[WLAN_KEY_LEN_CCMP];
+} __attribute__ ((packed));
+
+struct iwm_umac_key_remove {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_tx_key_id {
+	struct iwm_umac_wifi_if hdr;
+	u8 key_idx;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_stats_req {
+	__le32 flags;
+} __attribute__ ((packed));
+
+/* LMAC commands */
+int iwm_read_mac(struct iwm_priv *iwm, u8 *mac);
+int iwm_send_prio_table(struct iwm_priv *iwm);
+int iwm_send_init_calib_cfg(struct iwm_priv *iwm, u8 calib_requested);
+int iwm_send_periodic_calib_cfg(struct iwm_priv *iwm, u8 calib_requested);
+int iwm_send_calib_results(struct iwm_priv *iwm);
+int iwm_store_rxiq_calib_result(struct iwm_priv *iwm);
+
+/* UMAC commands */
+int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
+			 bool resp);
+int iwm_send_umac_reset(struct iwm_priv *iwm, __le32 reset_flags, bool resp);
+int iwm_umac_set_config_fix(struct iwm_priv *iwm, u16 tbl, u16 key, u32 value);
+int iwm_umac_set_config_var(struct iwm_priv *iwm, u16 key,
+			    void *payload, u16 payload_size);
+int iwm_send_umac_config(struct iwm_priv *iwm, __le32 reset_flags);
+int iwm_send_mlme_profile(struct iwm_priv *iwm);
+int iwm_invalidate_mlme_profile(struct iwm_priv *iwm);
+int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id);
+int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx);
+int iwm_set_key(struct iwm_priv *iwm, bool remove, bool set_tx_key,
+		struct iwm_key *key);
+int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags);
+int iwm_send_umac_channel_list(struct iwm_priv *iwm);
+int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
+		   int ssid_num);
+int iwm_scan_one_ssid(struct iwm_priv *iwm, u8 *ssid, int ssid_len);
+
+/* UDMA commands */
+int iwm_target_reset(struct iwm_priv *iwm);
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/debug.h b/drivers/net/wireless/iwmc3200wifi/debug.h
new file mode 100644
index 00000000000..8fbb42d9c21
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/debug.h
@@ -0,0 +1,124 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __IWM_DEBUG_H__
+#define __IWM_DEBUG_H__
+
+#define IWM_ERR(p, f, a...) dev_err(iwm_to_dev(p), f, ## a)
+#define IWM_WARN(p, f, a...) dev_warn(iwm_to_dev(p), f, ## a)
+#define IWM_INFO(p, f, a...) dev_info(iwm_to_dev(p), f, ## a)
+#define IWM_CRIT(p, f, a...) dev_crit(iwm_to_dev(p), f, ## a)
+
+#ifdef CONFIG_IWM_DEBUG
+
+#define IWM_DEBUG_MODULE(i, level, module, f, a...)			     \
+do {									     \
+	if (unlikely(i->dbg.dbg_module[IWM_DM_##module] >= (IWM_DL_##level)))\
+		dev_printk(KERN_INFO, (iwm_to_dev(i)),	             \
+			   "%s " f, __func__ , ## a);			     \
+} while (0)
+
+#define IWM_HEXDUMP(i, level, module, pref, buf, len)		             \
+do {									     \
+	if (unlikely(i->dbg.dbg_module[IWM_DM_##module] >= (IWM_DL_##level)))\
+		print_hex_dump(KERN_INFO, pref, DUMP_PREFIX_OFFSET,	     \
+			       16, 1, buf, len, 1);			     \
+} while (0)
+
+#else
+
+#define IWM_DEBUG_MODULE(i, level, module, f, a...)
+#define IWM_HEXDUMP(i, level, module, pref, buf, len)
+
+#endif /* CONFIG_IWM_DEBUG */
+
+/* Debug modules */
+enum iwm_debug_module_id {
+	IWM_DM_BOOT = 0,
+	IWM_DM_FW,
+	IWM_DM_SDIO,
+	IWM_DM_NTF,
+	IWM_DM_RX,
+	IWM_DM_TX,
+	IWM_DM_MLME,
+	IWM_DM_CMD,
+	IWM_DM_WEXT,
+	__IWM_DM_NR,
+};
+#define IWM_DM_DEFAULT 0
+
+#define IWM_DBG_BOOT(i, l, f, a...) IWM_DEBUG_MODULE(i, l, BOOT, f, ## a)
+#define IWM_DBG_FW(i, l, f, a...)   IWM_DEBUG_MODULE(i, l, FW, f, ## a)
+#define IWM_DBG_SDIO(i, l, f, a...) IWM_DEBUG_MODULE(i, l, SDIO, f, ## a)
+#define IWM_DBG_NTF(i, l, f, a...)  IWM_DEBUG_MODULE(i, l, NTF, f, ## a)
+#define IWM_DBG_RX(i, l, f, a...)   IWM_DEBUG_MODULE(i, l, RX, f, ## a)
+#define IWM_DBG_TX(i, l, f, a...)   IWM_DEBUG_MODULE(i, l, TX, f, ## a)
+#define IWM_DBG_MLME(i, l, f, a...) IWM_DEBUG_MODULE(i, l, MLME, f, ## a)
+#define IWM_DBG_CMD(i, l, f, a...)  IWM_DEBUG_MODULE(i, l, CMD, f, ## a)
+#define IWM_DBG_WEXT(i, l, f, a...) IWM_DEBUG_MODULE(i, l, WEXT, f, ## a)
+
+/* Debug levels */
+enum iwm_debug_level {
+	IWM_DL_NONE = 0,
+	IWM_DL_ERR,
+	IWM_DL_WARN,
+	IWM_DL_INFO,
+	IWM_DL_DBG,
+};
+#define IWM_DL_DEFAULT IWM_DL_ERR
+
+struct iwm_debugfs {
+	struct iwm_priv *iwm;
+	struct dentry *rootdir;
+	struct dentry *devdir;
+	struct dentry *dbgdir;
+	struct dentry *txdir;
+	struct dentry *rxdir;
+	struct dentry *busdir;
+
+	u32 dbg_level;
+	struct dentry *dbg_level_dentry;
+
+	unsigned long dbg_modules;
+	struct dentry *dbg_modules_dentry;
+
+	u8 dbg_module[__IWM_DM_NR];
+	struct dentry *dbg_module_dentries[__IWM_DM_NR];
+
+	struct dentry *txq_dentry;
+	struct dentry *tx_credit_dentry;
+	struct dentry *rx_ticket_dentry;
+};
+
+#ifdef CONFIG_IWM_DEBUG
+int iwm_debugfs_init(struct iwm_priv *iwm);
+void iwm_debugfs_exit(struct iwm_priv *iwm);
+#else
+static inline int iwm_debugfs_init(struct iwm_priv *iwm)
+{
+	return 0;
+}
+static inline void iwm_debugfs_exit(struct iwm_priv *iwm) {}
+#endif
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c
new file mode 100644
index 00000000000..0fa7b9150d5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c
@@ -0,0 +1,453 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "rx.h"
+#include "debug.h"
+
+static struct {
+	u8 id;
+	char *name;
+} iwm_debug_module[__IWM_DM_NR] = {
+	 {IWM_DM_BOOT, "boot"},
+	 {IWM_DM_FW,   "fw"},
+	 {IWM_DM_SDIO, "sdio"},
+	 {IWM_DM_NTF,  "ntf"},
+	 {IWM_DM_RX,   "rx"},
+	 {IWM_DM_TX,   "tx"},
+	 {IWM_DM_MLME, "mlme"},
+	 {IWM_DM_CMD,  "cmd"},
+	 {IWM_DM_WEXT,  "wext"},
+};
+
+#define add_dbg_module(dbg, name, id, initlevel) 	\
+do {							\
+	struct dentry *d;				\
+	dbg.dbg_module[id] = (initlevel);		\
+	d = debugfs_create_x8(name, 0600, dbg.dbgdir,	\
+			     &(dbg.dbg_module[id]));	\
+	if (!IS_ERR(d))					\
+		dbg.dbg_module_dentries[id] = d;        \
+} while (0)
+
+static int iwm_debugfs_u32_read(void *data, u64 *val)
+{
+	struct iwm_priv *iwm = data;
+
+	*val = iwm->dbg.dbg_level;
+	return 0;
+}
+
+static int iwm_debugfs_dbg_level_write(void *data, u64 val)
+{
+	struct iwm_priv *iwm = data;
+	int i;
+
+	iwm->dbg.dbg_level = val;
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		iwm->dbg.dbg_module[i] = val;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_iwm_dbg_level,
+			iwm_debugfs_u32_read, iwm_debugfs_dbg_level_write,
+			"%llu\n");
+
+static int iwm_debugfs_dbg_modules_write(void *data, u64 val)
+{
+	struct iwm_priv *iwm = data;
+	int i, bit;
+
+	iwm->dbg.dbg_modules = val;
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		iwm->dbg.dbg_module[i] = 0;
+
+	for_each_bit(bit, &iwm->dbg.dbg_modules, __IWM_DM_NR)
+		iwm->dbg.dbg_module[bit] = iwm->dbg.dbg_level;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_iwm_dbg_modules,
+			iwm_debugfs_u32_read, iwm_debugfs_dbg_modules_write,
+			"%llu\n");
+
+static int iwm_txrx_open(struct inode *inode, struct file *filp)
+{
+	filp->private_data = inode->i_private;
+	return 0;
+}
+
+
+static ssize_t iwm_debugfs_txq_read(struct file *filp, char __user *buffer,
+				   size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	char *buf;
+	int i, buf_len = 4096;
+	size_t len = 0;
+	ssize_t ret;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (i = 0; i < IWM_TX_QUEUES; i++) {
+		struct iwm_tx_queue *txq = &iwm->txq[i];
+		struct sk_buff *skb;
+		int j;
+		unsigned long flags;
+
+		spin_lock_irqsave(&txq->queue.lock, flags);
+
+		skb = (struct sk_buff *)&txq->queue;
+
+		len += snprintf(buf + len, buf_len - len, "TXQ #%d\n", i);
+		len += snprintf(buf + len, buf_len - len, "\tStopped:     %d\n",
+				__netif_subqueue_stopped(iwm_to_ndev(iwm),
+							 txq->id));
+		len += snprintf(buf + len, buf_len - len, "\tConcat count:%d\n",
+				txq->concat_count);
+		len += snprintf(buf + len, buf_len - len, "\tQueue len:   %d\n",
+				skb_queue_len(&txq->queue));
+		for (j = 0; j < skb_queue_len(&txq->queue); j++) {
+			struct iwm_tx_info *tx_info;
+
+			skb = skb->next;
+			tx_info = skb_to_tx_info(skb);
+
+			len += snprintf(buf + len, buf_len - len,
+					"\tSKB #%d\n", j);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\tsta:   %d\n", tx_info->sta);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\tcolor: %d\n", tx_info->color);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\ttid:   %d\n", tx_info->tid);
+		}
+
+		spin_unlock_irqrestore(&txq->queue.lock, flags);
+	}
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+	kfree(buf);
+
+	return ret;
+}
+
+static ssize_t iwm_debugfs_tx_credit_read(struct file *filp,
+					  char __user *buffer,
+					  size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	struct iwm_tx_credit *credit = &iwm->tx_credit;
+	char *buf;
+	int i, buf_len = 4096;
+	size_t len = 0;
+	ssize_t ret;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	len += snprintf(buf + len, buf_len - len,
+			"NR pools:  %d\n", credit->pool_nr);
+	len += snprintf(buf + len, buf_len - len,
+			"pools map: 0x%lx\n", credit->full_pools_map);
+
+	len += snprintf(buf + len, buf_len - len, "\n### POOLS ###\n");
+	for (i = 0; i < IWM_MACS_OUT_GROUPS; i++) {
+		len += snprintf(buf + len, buf_len - len,
+				"pools entry #%d\n", i);
+		len += snprintf(buf + len, buf_len - len,
+				"\tid:          %d\n",
+				credit->pools[i].id);
+		len += snprintf(buf + len, buf_len - len,
+				"\tsid:         %d\n",
+				credit->pools[i].sid);
+		len += snprintf(buf + len, buf_len - len,
+				"\tmin_pages:   %d\n",
+				credit->pools[i].min_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\tmax_pages:   %d\n",
+				credit->pools[i].max_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\talloc_pages: %d\n",
+				credit->pools[i].alloc_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\tfreed_pages: %d\n",
+				credit->pools[i].total_freed_pages);
+	}
+
+	len += snprintf(buf + len, buf_len - len, "\n### SPOOLS ###\n");
+	for (i = 0; i < IWM_MACS_OUT_SGROUPS; i++) {
+		len += snprintf(buf + len, buf_len - len,
+				"spools entry #%d\n", i);
+		len += snprintf(buf + len, buf_len - len,
+				"\tid:          %d\n",
+				credit->spools[i].id);
+		len += snprintf(buf + len, buf_len - len,
+				"\tmax_pages:   %d\n",
+				credit->spools[i].max_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\talloc_pages: %d\n",
+				credit->spools[i].alloc_pages);
+
+	}
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+	kfree(buf);
+
+	return ret;
+}
+
+static ssize_t iwm_debugfs_rx_ticket_read(struct file *filp,
+					  char __user *buffer,
+					  size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	struct iwm_rx_ticket_node *ticket, *next;
+	char *buf;
+	int buf_len = 4096, i;
+	size_t len = 0;
+	ssize_t ret;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	list_for_each_entry_safe(ticket, next, &iwm->rx_tickets, node) {
+		len += snprintf(buf + len, buf_len - len, "Ticket #%d\n",
+				ticket->ticket->id);
+		len += snprintf(buf + len, buf_len - len, "\taction: 0x%x\n",
+				ticket->ticket->action);
+		len += snprintf(buf + len, buf_len - len, "\tflags:  0x%x\n",
+				ticket->ticket->flags);
+	}
+
+	for (i = 0; i < IWM_RX_ID_HASH; i++) {
+		struct iwm_rx_packet *packet, *nxt;
+		struct list_head *pkt_list = &iwm->rx_packets[i];
+		if (!list_empty(pkt_list)) {
+			len += snprintf(buf + len, buf_len - len,
+					"Packet hash #%d\n", i);
+			list_for_each_entry_safe(packet, nxt, pkt_list, node) {
+				len += snprintf(buf + len, buf_len - len,
+						"\tPacket id:     %d\n",
+						packet->id);
+				len += snprintf(buf + len, buf_len - len,
+						"\tPacket length: %lu\n",
+						packet->pkt_size);
+			}
+		}
+	}
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+	kfree(buf);
+
+	return ret;
+}
+
+
+static const struct file_operations iwm_debugfs_txq_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_txrx_open,
+	.read =		iwm_debugfs_txq_read,
+};
+
+static const struct file_operations iwm_debugfs_tx_credit_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_txrx_open,
+	.read =		iwm_debugfs_tx_credit_read,
+};
+
+static const struct file_operations iwm_debugfs_rx_ticket_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_txrx_open,
+	.read =		iwm_debugfs_rx_ticket_read,
+};
+
+int iwm_debugfs_init(struct iwm_priv *iwm)
+{
+	int i, result;
+	char devdir[16];
+
+	iwm->dbg.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	result = PTR_ERR(iwm->dbg.rootdir);
+	if (!result || IS_ERR(iwm->dbg.rootdir)) {
+		if (result == -ENODEV) {
+			IWM_ERR(iwm, "DebugFS (CONFIG_DEBUG_FS) not "
+				"enabled in kernel config\n");
+			result = 0;	/* No debugfs support */
+		}
+		IWM_ERR(iwm, "Couldn't create rootdir: %d\n", result);
+		goto error;
+	}
+
+	snprintf(devdir, sizeof(devdir), "%s", wiphy_name(iwm_to_wiphy(iwm)));
+
+	iwm->dbg.devdir = debugfs_create_dir(devdir, iwm->dbg.rootdir);
+	result = PTR_ERR(iwm->dbg.devdir);
+	if (IS_ERR(iwm->dbg.devdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create devdir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.dbgdir = debugfs_create_dir("debug", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.dbgdir);
+	if (IS_ERR(iwm->dbg.dbgdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create dbgdir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.rxdir = debugfs_create_dir("rx", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.rxdir);
+	if (IS_ERR(iwm->dbg.rxdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create rx dir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.txdir = debugfs_create_dir("tx", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.txdir);
+	if (IS_ERR(iwm->dbg.txdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create tx dir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.busdir = debugfs_create_dir("bus", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.busdir);
+	if (IS_ERR(iwm->dbg.busdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create bus dir: %d\n", result);
+		goto error;
+	}
+
+	if (iwm->bus_ops->debugfs_init) {
+		result = iwm->bus_ops->debugfs_init(iwm, iwm->dbg.busdir);
+		if (result < 0) {
+			IWM_ERR(iwm, "Couldn't create bus entry: %d\n", result);
+			goto error;
+		}
+	}
+
+
+	iwm->dbg.dbg_level = IWM_DL_NONE;
+	iwm->dbg.dbg_level_dentry =
+		debugfs_create_file("level", 0200, iwm->dbg.dbgdir, iwm,
+				    &fops_iwm_dbg_level);
+	result = PTR_ERR(iwm->dbg.dbg_level_dentry);
+	if (IS_ERR(iwm->dbg.dbg_level_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create dbg_level: %d\n", result);
+		goto error;
+	}
+
+
+	iwm->dbg.dbg_modules = IWM_DM_DEFAULT;
+	iwm->dbg.dbg_modules_dentry =
+		debugfs_create_file("modules", 0200, iwm->dbg.dbgdir, iwm,
+				    &fops_iwm_dbg_modules);
+	result = PTR_ERR(iwm->dbg.dbg_modules_dentry);
+	if (IS_ERR(iwm->dbg.dbg_modules_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create dbg_modules: %d\n", result);
+		goto error;
+	}
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		add_dbg_module(iwm->dbg, iwm_debug_module[i].name,
+			       iwm_debug_module[i].id, IWM_DL_DEFAULT);
+
+	iwm->dbg.txq_dentry = debugfs_create_file("queues", 0200,
+						  iwm->dbg.txdir, iwm,
+						  &iwm_debugfs_txq_fops);
+	result = PTR_ERR(iwm->dbg.txq_dentry);
+	if (IS_ERR(iwm->dbg.txq_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create tx queue: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.tx_credit_dentry = debugfs_create_file("credits", 0200,
+						   iwm->dbg.txdir, iwm,
+						   &iwm_debugfs_tx_credit_fops);
+	result = PTR_ERR(iwm->dbg.tx_credit_dentry);
+	if (IS_ERR(iwm->dbg.tx_credit_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create tx credit: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.rx_ticket_dentry = debugfs_create_file("tickets", 0200,
+						  iwm->dbg.rxdir, iwm,
+						  &iwm_debugfs_rx_ticket_fops);
+	result = PTR_ERR(iwm->dbg.rx_ticket_dentry);
+	if (IS_ERR(iwm->dbg.rx_ticket_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create rx ticket: %d\n", result);
+		goto error;
+	}
+
+	return 0;
+
+ error:
+	return result;
+}
+
+void iwm_debugfs_exit(struct iwm_priv *iwm)
+{
+	int i;
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		debugfs_remove(iwm->dbg.dbg_module_dentries[i]);
+
+	debugfs_remove(iwm->dbg.dbg_modules_dentry);
+	debugfs_remove(iwm->dbg.dbg_level_dentry);
+	debugfs_remove(iwm->dbg.txq_dentry);
+	debugfs_remove(iwm->dbg.tx_credit_dentry);
+	debugfs_remove(iwm->dbg.rx_ticket_dentry);
+	if (iwm->bus_ops->debugfs_exit)
+		iwm->bus_ops->debugfs_exit(iwm);
+
+	debugfs_remove(iwm->dbg.busdir);
+	debugfs_remove(iwm->dbg.dbgdir);
+	debugfs_remove(iwm->dbg.txdir);
+	debugfs_remove(iwm->dbg.rxdir);
+	debugfs_remove(iwm->dbg.devdir);
+	debugfs_remove(iwm->dbg.rootdir);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.c b/drivers/net/wireless/iwmc3200wifi/eeprom.c
new file mode 100644
index 00000000000..0f34b84fd2e
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.c
@@ -0,0 +1,187 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include "iwm.h"
+#include "umac.h"
+#include "commands.h"
+#include "eeprom.h"
+
+static struct iwm_eeprom_entry eeprom_map[] = {
+	[IWM_EEPROM_SIG] =
+	{"Signature", IWM_EEPROM_SIG_OFF, IWM_EEPROM_SIG_LEN},
+
+	[IWM_EEPROM_VERSION] =
+	{"Version", IWM_EEPROM_VERSION_OFF, IWM_EEPROM_VERSION_LEN},
+
+	[IWM_EEPROM_OEM_HW_VERSION] =
+	{"OEM HW version", IWM_EEPROM_OEM_HW_VERSION_OFF,
+	 IWM_EEPROM_OEM_HW_VERSION_LEN},
+
+	[IWM_EEPROM_MAC_VERSION] =
+	{"MAC version", IWM_EEPROM_MAC_VERSION_OFF, IWM_EEPROM_MAC_VERSION_LEN},
+
+	[IWM_EEPROM_CARD_ID] =
+	{"Card ID", IWM_EEPROM_CARD_ID_OFF, IWM_EEPROM_CARD_ID_LEN},
+
+	[IWM_EEPROM_RADIO_CONF] =
+	{"Radio config", IWM_EEPROM_RADIO_CONF_OFF, IWM_EEPROM_RADIO_CONF_LEN},
+
+	[IWM_EEPROM_SKU_CAP] =
+	{"SKU capabilities", IWM_EEPROM_SKU_CAP_OFF, IWM_EEPROM_SKU_CAP_LEN},
+
+	[IWM_EEPROM_CALIB_RXIQ_OFFSET] =
+	{"RX IQ offset", IWM_EEPROM_CALIB_RXIQ_OFF, IWM_EEPROM_INDIRECT_LEN},
+
+	[IWM_EEPROM_CALIB_RXIQ] =
+	{"Calib RX IQ", 0, IWM_EEPROM_CALIB_RXIQ_LEN},
+};
+
+
+static int iwm_eeprom_read(struct iwm_priv *iwm, u8 eeprom_id)
+{
+	int ret;
+	u32 entry_size, chunk_size, data_offset = 0, addr_offset = 0;
+	u32 addr;
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_eeprom_proxy eeprom_cmd;
+
+	if (eeprom_id > (IWM_EEPROM_LAST - 1))
+		return -EINVAL;
+
+	entry_size = eeprom_map[eeprom_id].length;
+
+	if (eeprom_id >= IWM_EEPROM_INDIRECT_DATA) {
+		/* indirect data */
+		u32 off_id = eeprom_id - IWM_EEPROM_INDIRECT_DATA +
+			     IWM_EEPROM_INDIRECT_OFFSET;
+
+		eeprom_map[eeprom_id].offset =
+			*(u16 *)(iwm->eeprom + eeprom_map[off_id].offset) << 1;
+	}
+
+	addr = eeprom_map[eeprom_id].offset;
+
+	udma_cmd.eop = 1;
+	udma_cmd.credit_group = 0x4;
+	udma_cmd.ra_tid = UMAC_HDI_ACT_TBL_IDX_HOST_CMD;
+	udma_cmd.lmac_offset = 0;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_EEPROM_PROXY;
+	umac_cmd.resp = 1;
+
+	while (entry_size > 0) {
+		chunk_size = min_t(u32, entry_size, IWM_MAX_EEPROM_DATA_LEN);
+
+		eeprom_cmd.hdr.type =
+			cpu_to_le32(IWM_UMAC_CMD_EEPROM_TYPE_READ);
+		eeprom_cmd.hdr.offset = cpu_to_le32(addr + addr_offset);
+		eeprom_cmd.hdr.len = cpu_to_le32(chunk_size);
+
+		ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd,
+					    &umac_cmd, &eeprom_cmd,
+				     sizeof(struct iwm_umac_cmd_eeprom_proxy));
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't read eeprom\n");
+			return ret;
+		}
+
+		ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_EEPROM_PROXY,
+				       IWM_SRC_UMAC, 2*HZ);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Did not get any eeprom answer\n");
+			return ret;
+		}
+
+		data_offset += chunk_size;
+		addr_offset += chunk_size;
+		entry_size -= chunk_size;
+	}
+
+	return 0;
+}
+
+u8 *iwm_eeprom_access(struct iwm_priv *iwm, u8 eeprom_id)
+{
+	if (!iwm->eeprom)
+		return ERR_PTR(-ENODEV);
+
+	return iwm->eeprom + eeprom_map[eeprom_id].offset;
+}
+
+int iwm_eeprom_init(struct iwm_priv *iwm)
+{
+	int i, ret = 0;
+	char name[32];
+
+	iwm->eeprom = kzalloc(IWM_EEPROM_LEN, GFP_KERNEL);
+	if (!iwm->eeprom)
+		return -ENOMEM;
+
+	for (i = IWM_EEPROM_FIRST; i < IWM_EEPROM_LAST; i++) {
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+		if (iwm->conf.hw_b0 && (i >= IWM_EEPROM_INDIRECT_OFFSET))
+			break;
+#endif
+		ret = iwm_eeprom_read(iwm, i);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't read eeprom entry #%d: %s\n",
+				i, eeprom_map[i].name);
+			break;
+		}
+	}
+
+	IWM_DBG_BOOT(iwm, DBG, "EEPROM dump:\n");
+	for (i = IWM_EEPROM_FIRST; i < IWM_EEPROM_LAST; i++) {
+		memset(name, 0, 32);
+		sprintf(name, "%s: ", eeprom_map[i].name);
+
+		IWM_HEXDUMP(iwm, DBG, BOOT, name,
+			    iwm->eeprom + eeprom_map[i].offset,
+			    eeprom_map[i].length);
+	}
+
+	return ret;
+}
+
+void iwm_eeprom_exit(struct iwm_priv *iwm)
+{
+	kfree(iwm->eeprom);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.h b/drivers/net/wireless/iwmc3200wifi/eeprom.h
new file mode 100644
index 00000000000..cdb31a6a1f5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.h
@@ -0,0 +1,114 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_EEPROM_H__
+#define __IWM_EEPROM_H__
+
+enum {
+	IWM_EEPROM_SIG = 0,
+	IWM_EEPROM_FIRST = IWM_EEPROM_SIG,
+	IWM_EEPROM_VERSION,
+	IWM_EEPROM_OEM_HW_VERSION,
+	IWM_EEPROM_MAC_VERSION,
+	IWM_EEPROM_CARD_ID,
+	IWM_EEPROM_RADIO_CONF,
+	IWM_EEPROM_SKU_CAP,
+
+	IWM_EEPROM_INDIRECT_OFFSET,
+	IWM_EEPROM_CALIB_RXIQ_OFFSET = IWM_EEPROM_INDIRECT_OFFSET,
+
+	IWM_EEPROM_INDIRECT_DATA,
+	IWM_EEPROM_CALIB_RXIQ = IWM_EEPROM_INDIRECT_DATA,
+
+	IWM_EEPROM_LAST,
+};
+
+#define IWM_EEPROM_SIG_OFF             0x00
+#define IWM_EEPROM_VERSION_OFF        (0x54 << 1)
+#define IWM_EEPROM_OEM_HW_VERSION_OFF (0x56 << 1)
+#define IWM_EEPROM_MAC_VERSION_OFF    (0x30 << 1)
+#define IWM_EEPROM_CARD_ID_OFF        (0x5d << 1)
+#define IWM_EEPROM_RADIO_CONF_OFF     (0x58 << 1)
+#define IWM_EEPROM_SKU_CAP_OFF        (0x55 << 1)
+#define IWM_EEPROM_CALIB_CONFIG_OFF   (0x7c << 1)
+
+#define IWM_EEPROM_SIG_LEN              4
+#define IWM_EEPROM_VERSION_LEN          2
+#define IWM_EEPROM_OEM_HW_VERSION_LEN   2
+#define IWM_EEPROM_MAC_VERSION_LEN      1
+#define IWM_EEPROM_CARD_ID_LEN          2
+#define IWM_EEPROM_RADIO_CONF_LEN       2
+#define IWM_EEPROM_SKU_CAP_LEN          2
+#define IWM_EEPROM_INDIRECT_LEN		2
+
+#define IWM_MAX_EEPROM_DATA_LEN         240
+#define IWM_EEPROM_LEN                  0x800
+
+#define IWM_EEPROM_MIN_ALLOWED_VERSION          0x0610
+#define IWM_EEPROM_MAX_ALLOWED_VERSION          0x0700
+#define IWM_EEPROM_CURRENT_VERSION              0x0612
+
+#define IWM_EEPROM_SKU_CAP_BAND_24GHZ           (1 << 4)
+#define IWM_EEPROM_SKU_CAP_BAND_52GHZ           (1 << 5)
+#define IWM_EEPROM_SKU_CAP_11N_ENABLE           (1 << 6)
+
+enum {
+	IWM_EEPROM_CALIB_CAL_HDR,
+	IWM_EEPROM_CALIB_TX_POWER,
+	IWM_EEPROM_CALIB_XTAL,
+	IWM_EEPROM_CALIB_TEMPERATURE,
+	IWM_EEPROM_CALIB_RX_BB_FILTER,
+	IWM_EEPROM_CALIB_RX_IQ,
+	IWM_EEPROM_CALIB_MAX,
+};
+
+#define IWM_EEPROM_CALIB_RXIQ_OFF	(IWM_EEPROM_CALIB_CONFIG_OFF + \
+					 (IWM_EEPROM_CALIB_RX_IQ << 1))
+#define IWM_EEPROM_CALIB_RXIQ_LEN	sizeof(struct iwm_lmac_calib_rxiq)
+
+struct iwm_eeprom_entry {
+	char *name;
+	u32 offset;
+	u32 length;
+};
+
+int iwm_eeprom_init(struct iwm_priv *iwm);
+void iwm_eeprom_exit(struct iwm_priv *iwm);
+u8 *iwm_eeprom_access(struct iwm_priv *iwm, u8 eeprom_id);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c
new file mode 100644
index 00000000000..ec1a15a5a0e
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/fw.c
@@ -0,0 +1,388 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/firmware.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "debug.h"
+#include "fw.h"
+#include "commands.h"
+
+static const char fw_barker[] = "*WESTOPFORNOONE*";
+
+/*
+ * @op_code: Op code we're looking for.
+ * @index: There can be several instances of the same opcode within
+ *         the firmware. Index specifies which one we're looking for.
+ */
+static int iwm_fw_op_offset(struct iwm_priv *iwm, const struct firmware *fw,
+			    u16 op_code, u32 index)
+{
+	int offset = -EINVAL, fw_offset;
+	u32 op_index = 0;
+	const u8 *fw_ptr;
+	struct iwm_fw_hdr_rec *rec;
+
+	fw_offset = 0;
+	fw_ptr = fw->data;
+
+	/* We first need to look for the firmware barker */
+	if (memcmp(fw_ptr, fw_barker, IWM_HDR_BARKER_LEN)) {
+		IWM_ERR(iwm, "No barker string in this FW\n");
+		return -EINVAL;
+	}
+
+	if (fw->size < IWM_HDR_LEN) {
+		IWM_ERR(iwm, "FW is too small (%zu)\n", fw->size);
+		return -EINVAL;
+	}
+
+	fw_offset += IWM_HDR_BARKER_LEN;
+
+	while (fw_offset < fw->size) {
+		rec = (struct iwm_fw_hdr_rec *)(fw_ptr + fw_offset);
+
+		IWM_DBG_FW(iwm, DBG, "FW: op_code: 0x%x, len: %d @ 0x%x\n",
+			   rec->op_code, rec->len, fw_offset);
+
+		if (rec->op_code == IWM_HDR_REC_OP_INVALID) {
+			IWM_DBG_FW(iwm, DBG, "Reached INVALID op code\n");
+			break;
+		}
+
+		if (rec->op_code == op_code) {
+			if (op_index == index) {
+				fw_offset += sizeof(struct iwm_fw_hdr_rec);
+				offset = fw_offset;
+				goto out;
+			}
+			op_index++;
+		}
+
+		fw_offset += sizeof(struct iwm_fw_hdr_rec) + rec->len;
+	}
+
+ out:
+	return offset;
+}
+
+static int iwm_load_firmware_chunk(struct iwm_priv *iwm,
+				   const struct firmware *fw,
+				   struct iwm_fw_img_desc *img_desc)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	u32 chunk_size;
+	const u8 *chunk_ptr;
+	int ret = 0;
+
+	IWM_DBG_FW(iwm, INFO, "Loading FW chunk: %d bytes @ 0x%x\n",
+		   img_desc->length, img_desc->address);
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+	target_cmd.handle_by_hw = 1;
+	target_cmd.op2 = 0;
+	target_cmd.resp = 0;
+	target_cmd.eop = 1;
+
+	chunk_size = img_desc->length;
+	chunk_ptr = fw->data + img_desc->offset;
+
+	while (chunk_size > 0) {
+		u32 tmp_chunk_size;
+
+		tmp_chunk_size = min_t(u32, chunk_size,
+				       IWM_MAX_NONWIFI_CMD_BUFF_SIZE);
+
+		target_cmd.addr = cpu_to_le32(img_desc->address +
+				    (chunk_ptr - fw->data - img_desc->offset));
+		target_cmd.op1_sz = cpu_to_le32(tmp_chunk_size);
+
+		IWM_DBG_FW(iwm, DBG, "\t%d bytes @ 0x%x\n",
+			   tmp_chunk_size, target_cmd.addr);
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, chunk_ptr);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't load FW chunk\n");
+			break;
+		}
+
+		chunk_size -= tmp_chunk_size;
+		chunk_ptr += tmp_chunk_size;
+	}
+
+	return ret;
+}
+/*
+ * To load a fw image to the target, we basically go through the
+ * fw, looking for OP_MEM_DESC records. Once we found one, we
+ * pass it to iwm_load_firmware_chunk().
+ * The OP_MEM_DESC records contain the actuall memory chunk to be
+ * sent, but also the destination address.
+ */
+static int iwm_load_img(struct iwm_priv *iwm, const char *img_name)
+{
+	const struct firmware *fw;
+	struct iwm_fw_img_desc *img_desc;
+	struct iwm_fw_img_ver *ver;
+	int ret = 0, fw_offset;
+	u32 opcode_idx = 0, build_date;
+	char *build_tag;
+
+	ret = request_firmware(&fw, img_name, iwm_to_dev(iwm));
+	if (ret) {
+		IWM_ERR(iwm, "Request firmware failed");
+		return ret;
+	}
+
+	IWM_DBG_FW(iwm, INFO, "Start to load FW %s\n", img_name);
+
+	while (1) {
+		fw_offset = iwm_fw_op_offset(iwm, fw,
+					     IWM_HDR_REC_OP_MEM_DESC,
+					     opcode_idx);
+		if (fw_offset < 0)
+			break;
+
+		img_desc = (struct iwm_fw_img_desc *)(fw->data + fw_offset);
+		ret = iwm_load_firmware_chunk(iwm, fw, img_desc);
+		if (ret < 0)
+			goto err_release_fw;
+		opcode_idx++;
+	};
+
+	/* Read firmware version */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_SW_VER, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	ver = (struct iwm_fw_img_ver *)(fw->data + fw_offset);
+
+	/* Read build tag */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_TAG, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	build_tag = (char *)(fw->data + fw_offset);
+
+	/* Read build date */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_DATE, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	build_date = *(u32 *)(fw->data + fw_offset);
+
+	IWM_INFO(iwm, "%s:\n", img_name);
+	IWM_INFO(iwm, "\tVersion:    %02X.%02X\n", ver->major, ver->minor);
+	IWM_INFO(iwm, "\tBuild tag:  %s\n", build_tag);
+	IWM_INFO(iwm, "\tBuild date: %x-%x-%x\n",
+		 IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
+		 IWM_BUILD_DAY(build_date));
+
+
+ err_release_fw:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int iwm_load_umac(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	int ret;
+
+	ret = iwm_load_img(iwm, iwm->bus_ops->umac_name);
+	if (ret < 0)
+		return ret;
+
+	/* We've loaded the UMAC, we can tell the target to jump there */
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_JUMP;
+	target_cmd.addr = cpu_to_le32(UMAC_MU_FW_INST_DATA_12_ADDR);
+	target_cmd.op1_sz = 0;
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 1 ;
+	target_cmd.eop = 1;
+
+	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't send JMP command\n");
+
+	return ret;
+}
+
+static int iwm_load_lmac(struct iwm_priv *iwm, const char *img_name)
+{
+	int ret;
+
+	ret = iwm_load_img(iwm, img_name);
+	if (ret < 0)
+		return ret;
+
+	return iwm_send_umac_reset(iwm,
+			cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
+}
+
+/*
+ * We currently have to load 3 FWs:
+ * 1) The UMAC (Upper MAC).
+ * 2) The calibration LMAC (Lower MAC).
+ *    We then send the calibration init command, so that the device can
+ *    run a first calibration round.
+ * 3) The operational LMAC, which replaces the calibration one when it's
+ *    done with the first calibration round.
+ *
+ * Once those 3 FWs have been loaded, we send the periodic calibration
+ * command, and then the device is available for regular 802.11 operations.
+ */
+int iwm_load_fw(struct iwm_priv *iwm)
+{
+	int ret;
+
+	/* We first start downloading the UMAC */
+	ret = iwm_load_umac(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "UMAC loading failed\n");
+		return ret;
+	}
+
+	/* Handle UMAC_ALIVE notification */
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_ALIVE, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle UMAC_ALIVE failed: %d\n", ret);
+		return ret;
+	}
+
+	/* UMAC is alive, we can download the calibration LMAC */
+	ret = iwm_load_lmac(iwm, iwm->bus_ops->calib_lmac_name);
+	if (ret) {
+		IWM_ERR(iwm, "Calibration LMAC loading failed\n");
+		return ret;
+	}
+
+	/* Handle UMAC_INIT_COMPLETE notification */
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for calibration "
+			"LMAC: %d\n", ret);
+		return ret;
+	}
+
+	/* Read EEPROM data */
+	ret = iwm_eeprom_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't init eeprom array\n");
+		return ret;
+	}
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (iwm->conf.hw_b0) {
+		clear_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map);
+		clear_bit(PHY_CALIBRATE_RX_IQ_CMD,
+			  &iwm->conf.periodic_calib_map);
+	}
+#endif
+	/* Read RX IQ calibration result from EEPROM */
+	if (test_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map)) {
+		iwm_store_rxiq_calib_result(iwm);
+		set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
+	}
+
+	iwm_send_prio_table(iwm);
+	iwm_send_init_calib_cfg(iwm, iwm->conf.init_calib_map);
+
+	while (iwm->calib_done_map != iwm->conf.init_calib_map) {
+		ret = iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
+				       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
+		if (ret) {
+			IWM_ERR(iwm, "Wait for calibration result timeout\n");
+			goto out;
+		}
+		IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
+			   "0x%lx, requested calibrations: 0x%lx\n",
+			   iwm->calib_done_map, iwm->conf.init_calib_map);
+	}
+
+	/* Handle LMAC CALIBRATION_COMPLETE notification */
+	ret = iwm_notif_handle(iwm, CALIBRATION_COMPLETE_NOTIFICATION,
+			       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for CALIBRATION_COMPLETE timeout\n");
+		goto out;
+	}
+
+	IWM_INFO(iwm, "LMAC calibration done: 0x%lx\n", iwm->calib_done_map);
+
+	iwm_send_umac_reset(iwm, cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_RESET), 1);
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
+		goto out;
+	}
+
+	/* Download the operational LMAC */
+	ret = iwm_load_lmac(iwm, iwm->bus_ops->lmac_name);
+	if (ret) {
+		IWM_ERR(iwm, "LMAC loading failed\n");
+		goto out;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for LMAC: %d\n", ret);
+		goto out;
+	}
+
+	iwm_send_prio_table(iwm);
+	iwm_send_calib_results(iwm);
+	iwm_send_periodic_calib_cfg(iwm, iwm->conf.periodic_calib_map);
+
+	return 0;
+
+ out:
+	iwm_eeprom_exit(iwm);
+	return ret;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.h b/drivers/net/wireless/iwmc3200wifi/fw.h
new file mode 100644
index 00000000000..c70a3b40dad
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/fw.h
@@ -0,0 +1,100 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_FW_H__
+#define __IWM_FW_H__
+
+/**
+ * struct iwm_fw_hdr_rec - An iwm firmware image is a
+ * concatenation of various records. Each of them is
+ * defined by an ID (aka op code), a length, and the
+ * actual data.
+ * @op_code: The record ID, see IWM_HDR_REC_OP_*
+ *
+ * @len: The record payload length
+ *
+ * @buf: The record payload
+ */
+struct iwm_fw_hdr_rec {
+	u16 op_code;
+	u16 len;
+	u8 buf[0];
+};
+
+/* Header's definitions */
+#define IWM_HDR_LEN                          (512)
+#define IWM_HDR_BARKER_LEN                   (16)
+
+/* Header's opcodes */
+#define IWM_HDR_REC_OP_INVALID             (0x00)
+#define IWM_HDR_REC_OP_BUILD_DATE          (0x01)
+#define IWM_HDR_REC_OP_BUILD_TAG           (0x02)
+#define IWM_HDR_REC_OP_SW_VER              (0x03)
+#define IWM_HDR_REC_OP_HW_SKU              (0x04)
+#define IWM_HDR_REC_OP_BUILD_OPT           (0x05)
+#define IWM_HDR_REC_OP_MEM_DESC            (0x06)
+#define IWM_HDR_REC_USERDEFS               (0x07)
+
+/* Header's records length (in bytes) */
+#define IWM_HDR_REC_LEN_BUILD_DATE           (4)
+#define IWM_HDR_REC_LEN_BUILD_TAG            (64)
+#define IWM_HDR_REC_LEN_SW_VER               (4)
+#define IWM_HDR_REC_LEN_HW_SKU               (4)
+#define IWM_HDR_REC_LEN_BUILD_OPT            (4)
+#define IWM_HDR_REC_LEN_MEM_DESC             (12)
+#define IWM_HDR_REC_LEN_USERDEF              (64)
+
+#define IWM_BUILD_YEAR(date) ((date >> 16) & 0xffff)
+#define IWM_BUILD_MONTH(date) ((date >> 8) & 0xff)
+#define IWM_BUILD_DAY(date) (date & 0xff)
+
+struct iwm_fw_img_desc {
+	u32 offset;
+	u32 address;
+	u32 length;
+};
+
+struct iwm_fw_img_ver {
+	u8 minor;
+	u8 major;
+	u16 reserved;
+};
+
+int iwm_load_fw(struct iwm_priv *iwm);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
new file mode 100644
index 00000000000..ee127fe4f43
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -0,0 +1,464 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+/*
+ * Hardware Abstraction Layer for iwm.
+ *
+ * This file mostly defines an abstraction API for
+ * sending various commands to the target.
+ *
+ * We have 2 types of commands: wifi and non-wifi ones.
+ *
+ * - wifi commands:
+ *   They are used for sending LMAC and UMAC commands,
+ *   and thus are the most commonly used ones.
+ *   There are 2 different wifi command types, the regular
+ *   one and the LMAC one. The former is used to send
+ *   UMAC commands (see UMAC_CMD_OPCODE_* from umac.h)
+ *   while the latter is used for sending commands to the
+ *   LMAC. If you look at LMAC commands you'll se that they
+ *   are actually regular iwlwifi target commands encapsulated
+ *   into a special UMAC command called UMAC passthrough.
+ *   This is due to the fact the the host talks exclusively
+ *   to the UMAC and so there needs to be a special UMAC
+ *   command for talking to the LMAC.
+ *   This is how a wifi command is layed out:
+ *    ------------------------
+ *   | iwm_udma_out_wifi_hdr  |
+ *    ------------------------
+ *   | SW meta_data (32 bits) |
+ *    ------------------------
+ *   | iwm_dev_cmd_hdr        |
+ *    ------------------------
+ *   | payload                |
+ *   | ....                   |
+ *
+ * - non-wifi, or general commands:
+ *   Those commands are handled by the device's bootrom,
+ *   and are typically sent when the UMAC and the LMAC
+ *   are not yet available.
+ *    *   This is how a non-wifi command is layed out:
+ *    ---------------------------
+ *   | iwm_udma_out_nonwifi_hdr  |
+ *    ---------------------------
+ *   | payload                   |
+ *   | ....                      |
+
+ *
+ * All the commands start with a UDMA header, which is
+ * basically a 32 bits field. The 4 LSB there define
+ * an opcode that allows the target to differentiate
+ * between wifi (opcode is 0xf) and non-wifi commands
+ * (opcode is [0..0xe]).
+ *
+ * When a command (wifi or non-wifi) is supposed to receive
+ * an answer, we queue the command buffer. When we do receive
+ * a command response from the UMAC, we go through the list
+ * of pending command, and pass both the command and the answer
+ * to the rx handler. Each command is sent with a unique
+ * sequence id, and the answer is sent with the same one. This
+ * is how we're supposed to match an answer with its command.
+ * See rx.c:iwm_rx_handle_[non]wifi() and iwm_get_pending_[non]wifi()
+ * for the implementation details.
+ */
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "debug.h"
+
+static void iwm_nonwifi_cmd_init(struct iwm_priv *iwm,
+				 struct iwm_nonwifi_cmd *cmd,
+				 struct iwm_udma_nonwifi_cmd *udma_cmd)
+{
+	INIT_LIST_HEAD(&cmd->pending);
+
+	spin_lock(&iwm->cmd_lock);
+
+	cmd->resp_received = 0;
+
+	cmd->seq_num = iwm->nonwifi_seq_num;
+	udma_cmd->seq_num = cpu_to_le16(cmd->seq_num);
+
+	cmd->seq_num = iwm->nonwifi_seq_num++;
+	iwm->nonwifi_seq_num %= UMAC_NONWIFI_SEQ_NUM_MAX;
+
+	if (udma_cmd->resp)
+		list_add_tail(&cmd->pending, &iwm->nonwifi_pending_cmd);
+
+	spin_unlock(&iwm->cmd_lock);
+
+	cmd->buf.start = cmd->buf.payload;
+	cmd->buf.len = 0;
+
+	memcpy(&cmd->udma_cmd, udma_cmd, sizeof(*udma_cmd));
+}
+
+u16 iwm_alloc_wifi_cmd_seq(struct iwm_priv *iwm)
+{
+	u16 seq_num = iwm->wifi_seq_num;
+
+	iwm->wifi_seq_num++;
+	iwm->wifi_seq_num %= UMAC_WIFI_SEQ_NUM_MAX;
+
+	return seq_num;
+}
+
+static void iwm_wifi_cmd_init(struct iwm_priv *iwm,
+			      struct iwm_wifi_cmd *cmd,
+			      struct iwm_udma_wifi_cmd *udma_cmd,
+			      struct iwm_umac_cmd *umac_cmd,
+			      struct iwm_lmac_cmd *lmac_cmd,
+			      u16 payload_size)
+{
+	INIT_LIST_HEAD(&cmd->pending);
+
+	spin_lock(&iwm->cmd_lock);
+
+	cmd->seq_num = iwm_alloc_wifi_cmd_seq(iwm);
+	umac_cmd->seq_num = cpu_to_le16(cmd->seq_num);
+
+	if (umac_cmd->resp)
+		list_add_tail(&cmd->pending, &iwm->wifi_pending_cmd);
+
+	spin_unlock(&iwm->cmd_lock);
+
+	cmd->buf.start = cmd->buf.payload;
+	cmd->buf.len = 0;
+
+	if (lmac_cmd) {
+		cmd->buf.start -= sizeof(struct iwm_lmac_hdr);
+
+		lmac_cmd->seq_num = cpu_to_le16(cmd->seq_num);
+		lmac_cmd->count = cpu_to_le16(payload_size);
+
+		memcpy(&cmd->lmac_cmd, lmac_cmd, sizeof(*lmac_cmd));
+
+		umac_cmd->count = cpu_to_le16(sizeof(struct iwm_lmac_hdr));
+	} else
+		umac_cmd->count = 0;
+
+	umac_cmd->count = cpu_to_le16(payload_size +
+				      le16_to_cpu(umac_cmd->count));
+	udma_cmd->count = cpu_to_le16(sizeof(struct iwm_umac_fw_cmd_hdr) +
+				      le16_to_cpu(umac_cmd->count));
+
+	memcpy(&cmd->udma_cmd, udma_cmd, sizeof(*udma_cmd));
+	memcpy(&cmd->umac_cmd, umac_cmd, sizeof(*umac_cmd));
+}
+
+void iwm_cmd_flush(struct iwm_priv *iwm)
+{
+	struct iwm_wifi_cmd *wcmd, *wnext;
+	struct iwm_nonwifi_cmd *nwcmd, *nwnext;
+
+	list_for_each_entry_safe(wcmd, wnext, &iwm->wifi_pending_cmd, pending) {
+		list_del(&wcmd->pending);
+		kfree(wcmd);
+	}
+
+	list_for_each_entry_safe(nwcmd, nwnext, &iwm->nonwifi_pending_cmd,
+				 pending) {
+		list_del(&nwcmd->pending);
+		kfree(nwcmd);
+	}
+}
+
+struct iwm_wifi_cmd *iwm_get_pending_wifi_cmd(struct iwm_priv *iwm, u16 seq_num)
+{
+	struct iwm_wifi_cmd *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, &iwm->wifi_pending_cmd, pending)
+		if (cmd->seq_num == seq_num) {
+			list_del(&cmd->pending);
+			return cmd;
+		}
+
+	return NULL;
+}
+
+struct iwm_nonwifi_cmd *
+iwm_get_pending_nonwifi_cmd(struct iwm_priv *iwm, u8 seq_num, u8 cmd_opcode)
+{
+	struct iwm_nonwifi_cmd *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, &iwm->nonwifi_pending_cmd, pending)
+		if ((cmd->seq_num == seq_num) &&
+		    (cmd->udma_cmd.opcode == cmd_opcode) &&
+		    (cmd->resp_received)) {
+			list_del(&cmd->pending);
+			return cmd;
+		}
+
+	return NULL;
+}
+
+static void iwm_build_udma_nonwifi_hdr(struct iwm_priv *iwm,
+				       struct iwm_udma_out_nonwifi_hdr *hdr,
+				       struct iwm_udma_nonwifi_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_OPCODE, cmd->opcode);
+	SET_VAL32(hdr->cmd, UDMA_HDI_OUT_NW_CMD_RESP, cmd->resp);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_EOT, 1);
+	SET_VAL32(hdr->cmd, UDMA_HDI_OUT_NW_CMD_HANDLE_BY_HW,
+		  cmd->handle_by_hw);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_SIGNATURE, UMAC_HDI_OUT_SIGNATURE);
+	SET_VAL32(hdr->cmd, UDMA_HDI_OUT_CMD_NON_WIFI_HW_SEQ_NUM,
+		  le16_to_cpu(cmd->seq_num));
+
+	hdr->addr = cmd->addr;
+	hdr->op1_sz = cmd->op1_sz;
+	hdr->op2 = cmd->op2;
+}
+
+static int iwm_send_udma_nonwifi_cmd(struct iwm_priv *iwm,
+				     struct iwm_nonwifi_cmd *cmd)
+{
+	struct iwm_udma_out_nonwifi_hdr *udma_hdr;
+	struct iwm_nonwifi_cmd_buff *buf;
+	struct iwm_udma_nonwifi_cmd *udma_cmd = &cmd->udma_cmd;
+
+	buf = &cmd->buf;
+
+	buf->start -= sizeof(struct iwm_umac_nonwifi_out_hdr);
+	buf->len += sizeof(struct iwm_umac_nonwifi_out_hdr);
+
+	udma_hdr = (struct iwm_udma_out_nonwifi_hdr *)(buf->start);
+
+	iwm_build_udma_nonwifi_hdr(iwm, udma_hdr, udma_cmd);
+
+	IWM_DBG_CMD(iwm, DBG,
+		    "Send UDMA nonwifi cmd: opcode = 0x%x, resp = 0x%x, "
+		    "hw = 0x%x, seqnum = %d, addr = 0x%x, op1_sz = 0x%x, "
+		    "op2 = 0x%x\n", udma_cmd->opcode, udma_cmd->resp,
+		    udma_cmd->handle_by_hw, cmd->seq_num, udma_cmd->addr,
+		    udma_cmd->op1_sz, udma_cmd->op2);
+
+	return iwm_bus_send_chunk(iwm, buf->start, buf->len);
+}
+
+void iwm_udma_wifi_hdr_set_eop(struct iwm_priv *iwm, u8 *buf, u8 eop)
+{
+	struct iwm_udma_out_wifi_hdr *hdr = (struct iwm_udma_out_wifi_hdr *)buf;
+
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_EOT, eop);
+}
+
+void iwm_build_udma_wifi_hdr(struct iwm_priv *iwm,
+			     struct iwm_udma_out_wifi_hdr *hdr,
+			     struct iwm_udma_wifi_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_OPCODE, UMAC_HDI_OUT_OPCODE_WIFI);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_EOT, cmd->eop);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_SIGNATURE, UMAC_HDI_OUT_SIGNATURE);
+
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_BYTE_COUNT,
+		  le16_to_cpu(cmd->count));
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_CREDIT_GRP, cmd->credit_group);
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_RATID, cmd->ra_tid);
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_LMAC_OFFSET, cmd->lmac_offset);
+}
+
+void iwm_build_umac_hdr(struct iwm_priv *iwm,
+			struct iwm_umac_fw_cmd_hdr *hdr,
+			struct iwm_umac_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	SET_VAL32(hdr->meta_data, UMAC_FW_CMD_BYTE_COUNT,
+		  le16_to_cpu(cmd->count));
+	SET_VAL32(hdr->meta_data, UMAC_FW_CMD_TX_STA_COLOR, cmd->color);
+	SET_VAL8(hdr->cmd.flags, UMAC_DEV_CMD_FLAGS_RESP_REQ, cmd->resp);
+
+	hdr->cmd.cmd = cmd->id;
+	hdr->cmd.seq_num = cmd->seq_num;
+}
+
+static int iwm_send_udma_wifi_cmd(struct iwm_priv *iwm,
+				  struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_wifi_out_hdr *umac_hdr;
+	struct iwm_wifi_cmd_buff *buf;
+	struct iwm_udma_wifi_cmd *udma_cmd = &cmd->udma_cmd;
+	struct iwm_umac_cmd *umac_cmd = &cmd->umac_cmd;
+	int ret;
+
+	buf = &cmd->buf;
+
+	buf->start -= sizeof(struct iwm_umac_wifi_out_hdr);
+	buf->len += sizeof(struct iwm_umac_wifi_out_hdr);
+
+	umac_hdr = (struct iwm_umac_wifi_out_hdr *)(buf->start);
+
+	iwm_build_udma_wifi_hdr(iwm, &umac_hdr->hw_hdr, udma_cmd);
+	iwm_build_umac_hdr(iwm, &umac_hdr->sw_hdr, umac_cmd);
+
+	IWM_DBG_CMD(iwm, DBG,
+		    "Send UDMA wifi cmd: opcode = 0x%x, UMAC opcode = 0x%x, "
+		    "eop = 0x%x, count = 0x%x, credit_group = 0x%x, "
+		    "ra_tid = 0x%x, lmac_offset = 0x%x, seqnum = %d\n",
+		    UMAC_HDI_OUT_OPCODE_WIFI, umac_cmd->id,
+		    udma_cmd->eop, udma_cmd->count, udma_cmd->credit_group,
+		    udma_cmd->ra_tid, udma_cmd->lmac_offset, cmd->seq_num);
+
+	if (umac_cmd->id == UMAC_CMD_OPCODE_WIFI_PASS_THROUGH)
+		IWM_DBG_CMD(iwm, DBG, "\tLMAC opcode: 0x%x\n",
+			    cmd->lmac_cmd.id);
+
+	ret = iwm_tx_credit_alloc(iwm, udma_cmd->credit_group, buf->len);
+
+	/* We keep sending UMAC reset regardless of the command credits.
+	 * The UMAC is supposed to be reset anyway and the Tx credits are
+	 * reinitialized afterwards. If we are lucky, the reset could
+	 * still be done even though we have run out of credits for the
+	 * command pool at this moment.*/
+	if (ret && (umac_cmd->id != UMAC_CMD_OPCODE_RESET)) {
+		IWM_DBG_TX(iwm, DBG, "Failed to alloc tx credit for cmd %d\n",
+			   umac_cmd->id);
+		return ret;
+	}
+
+	return iwm_bus_send_chunk(iwm, buf->start, buf->len);
+}
+
+/* target_cmd a.k.a udma_nonwifi_cmd can be sent when UMAC is not available */
+int iwm_hal_send_target_cmd(struct iwm_priv *iwm,
+			    struct iwm_udma_nonwifi_cmd *udma_cmd,
+			    const void *payload)
+{
+	struct iwm_nonwifi_cmd *cmd;
+	int ret;
+
+	cmd = kzalloc(sizeof(struct iwm_nonwifi_cmd), GFP_KERNEL);
+	if (!cmd) {
+		IWM_ERR(iwm, "Couldn't alloc memory for hal cmd\n");
+		return -ENOMEM;
+	}
+
+	iwm_nonwifi_cmd_init(iwm, cmd, udma_cmd);
+
+	if (cmd->udma_cmd.opcode == UMAC_HDI_OUT_OPCODE_WRITE ||
+	    cmd->udma_cmd.opcode == UMAC_HDI_OUT_OPCODE_WRITE_PERSISTENT) {
+		cmd->buf.len = le32_to_cpu(cmd->udma_cmd.op1_sz);
+		memcpy(&cmd->buf.payload, payload, cmd->buf.len);
+	}
+
+	ret = iwm_send_udma_nonwifi_cmd(iwm, cmd);
+
+	if (!udma_cmd->resp)
+		kfree(cmd);
+
+	if (ret < 0)
+		return ret;
+
+	return cmd->seq_num;
+}
+
+static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr,
+			       struct iwm_lmac_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	hdr->id = cmd->id;
+	hdr->flags = 0; /* Is this ever used? */
+	hdr->seq_num = cmd->seq_num;
+}
+
+/*
+ * iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC.
+ * Sending command to the LMAC is equivalent to sending a
+ * regular UMAC command with the LMAC passtrough or the LMAC
+ * wrapper UMAC command IDs.
+ */
+int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  struct iwm_lmac_cmd *lmac_cmd,
+			  const void *payload, u16 payload_size)
+{
+	struct iwm_wifi_cmd *cmd;
+	struct iwm_lmac_hdr *hdr;
+	int lmac_hdr_len = 0;
+	int ret;
+
+	cmd = kzalloc(sizeof(struct iwm_wifi_cmd), GFP_KERNEL);
+	if (!cmd) {
+		IWM_ERR(iwm, "Couldn't alloc memory for wifi hal cmd\n");
+		return -ENOMEM;
+	}
+
+	iwm_wifi_cmd_init(iwm, cmd, udma_cmd, umac_cmd, lmac_cmd, payload_size);
+
+	if (lmac_cmd) {
+		hdr = (struct iwm_lmac_hdr *)(cmd->buf.start);
+
+		iwm_build_lmac_hdr(iwm, hdr, &cmd->lmac_cmd);
+		lmac_hdr_len = sizeof(struct iwm_lmac_hdr);
+	}
+
+	memcpy(cmd->buf.payload, payload, payload_size);
+	cmd->buf.len = le16_to_cpu(umac_cmd->count);
+
+	ret = iwm_send_udma_wifi_cmd(iwm, cmd);
+
+	/* We free the cmd if we're not expecting any response */
+	if (!umac_cmd->resp)
+		kfree(cmd);
+	return ret;
+}
+
+/*
+ * iwm_hal_send_umac_cmd(): This is a special case for
+ * iwm_hal_send_host_cmd() to send direct UMAC cmd (without
+ * LMAC involved).
+ */
+int iwm_hal_send_umac_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  const void *payload, u16 payload_size)
+{
+	return iwm_hal_send_host_cmd(iwm, udma_cmd, umac_cmd, NULL,
+				     payload, payload_size);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.h b/drivers/net/wireless/iwmc3200wifi/hal.h
new file mode 100644
index 00000000000..0adfdc85765
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/hal.h
@@ -0,0 +1,236 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef _IWM_HAL_H_
+#define _IWM_HAL_H_
+
+#include "umac.h"
+
+#define GET_VAL8(s, name)	((s >> name##_POS) & name##_SEED)
+#define GET_VAL16(s, name)	((le16_to_cpu(s) >> name##_POS) & name##_SEED)
+#define GET_VAL32(s, name)	((le32_to_cpu(s) >> name##_POS) & name##_SEED)
+
+#define SET_VAL8(s, name, val)						  \
+do {									  \
+	s = (s & ~(name##_SEED << name##_POS)) |			  \
+	    ((val & name##_SEED) << name##_POS);			  \
+} while (0)
+
+#define SET_VAL16(s, name, val)						  \
+do {									  \
+	s = cpu_to_le16((le16_to_cpu(s) & ~(name##_SEED << name##_POS)) | \
+			((val & name##_SEED) << name##_POS));		  \
+} while (0)
+
+#define SET_VAL32(s, name, val)						  \
+do {									  \
+	s = cpu_to_le32((le32_to_cpu(s) & ~(name##_SEED << name##_POS)) | \
+			((val & name##_SEED) << name##_POS));		  \
+} while (0)
+
+
+#define UDMA_UMAC_INIT	{	.eop = 1,				  \
+				.credit_group = 0x4,			  \
+				.ra_tid = UMAC_HDI_ACT_TBL_IDX_HOST_CMD,  \
+				.lmac_offset = 0 }
+#define UDMA_LMAC_INIT	{	.eop = 1,				  \
+				.credit_group = 0x4,			  \
+				.ra_tid = UMAC_HDI_ACT_TBL_IDX_HOST_CMD,  \
+				.lmac_offset = 4 }
+
+
+/* UDMA IN OP CODE -- cmd bits [3:0] */
+#define UDMA_IN_OPCODE_MASK			0xF
+
+#define UDMA_IN_OPCODE_GENERAL_RESP		0x0
+#define UDMA_IN_OPCODE_READ_RESP		0x1
+#define UDMA_IN_OPCODE_WRITE_RESP		0x2
+#define UDMA_IN_OPCODE_PERS_WRITE_RESP		0x5
+#define UDMA_IN_OPCODE_PERS_READ_RESP		0x6
+#define UDMA_IN_OPCODE_RD_MDFY_WR_RESP		0x7
+#define UDMA_IN_OPCODE_EP_MNGMT_MSG		0x8
+#define UDMA_IN_OPCODE_CRDT_CHNG_MSG		0x9
+#define UDMA_IN_OPCODE_CNTRL_DATABASE_MSG	0xA
+#define UDMA_IN_OPCODE_SW_MSG			0xB
+#define UDMA_IN_OPCODE_WIFI			0xF
+#define UDMA_IN_OPCODE_WIFI_LMAC		0x1F
+#define UDMA_IN_OPCODE_WIFI_UMAC		0x2F
+
+/* HW API: udma_hdi_nonwifi API (OUT and IN) */
+
+/* iwm_udma_nonwifi_cmd request response -- bits [9:9] */
+#define UDMA_HDI_OUT_NW_CMD_RESP_POS		9
+#define UDMA_HDI_OUT_NW_CMD_RESP_SEED		0x1
+
+/* iwm_udma_nonwifi_cmd handle by HW -- bits [11:11] */
+#define UDMA_HDI_OUT_NW_CMD_HANDLE_BY_HW_POS	11
+#define UDMA_HDI_OUT_NW_CMD_HANDLE_BY_HW_SEED	0x1
+
+/* iwm_udma_nonwifi_cmd sequence-number -- bits [12:15] */
+#define UDMA_HDI_OUT_NW_CMD_SEQ_NUM_POS		12
+#define UDMA_HDI_OUT_NW_CMD_SEQ_NUM_SEED	0xF
+
+/* UDMA IN Non-WIFI HW sequence number -- bits [12:15] */
+#define UDMA_IN_NW_HW_SEQ_NUM_POS		12
+#define UDMA_IN_NW_HW_SEQ_NUM_SEED		0xF
+
+/* UDMA IN Non-WIFI HW signature -- bits [16:31] */
+#define UDMA_IN_NW_HW_SIG_POS			16
+#define UDMA_IN_NW_HW_SIG_SEED			0xFFFF
+
+/* fixed signature */
+#define UDMA_IN_NW_HW_SIG			0xCBBC
+
+/* UDMA IN Non-WIFI HW block length -- bits [32:35] */
+#define UDMA_IN_NW_HW_LENGTH_SEED		0xF
+#define UDMA_IN_NW_HW_LENGTH_POS		32
+
+/* End of HW API: udma_hdi_nonwifi API (OUT and IN) */
+
+#define IWM_SDIO_FW_MAX_CHUNK_SIZE	2032
+#define IWM_MAX_WIFI_HEADERS_SIZE	32
+#define IWM_MAX_NONWIFI_HEADERS_SIZE	16
+#define IWM_MAX_NONWIFI_CMD_BUFF_SIZE	(IWM_SDIO_FW_MAX_CHUNK_SIZE - \
+					 IWM_MAX_NONWIFI_HEADERS_SIZE)
+#define IWM_MAX_WIFI_CMD_BUFF_SIZE	(IWM_SDIO_FW_MAX_CHUNK_SIZE - \
+					 IWM_MAX_WIFI_HEADERS_SIZE)
+
+#define IWM_HAL_CONCATENATE_BUF_SIZE	8192
+
+struct iwm_wifi_cmd_buff {
+	u16 len;
+	u8 *start;
+	u8 hdr[IWM_MAX_WIFI_HEADERS_SIZE];
+	u8 payload[IWM_MAX_WIFI_CMD_BUFF_SIZE];
+};
+
+struct iwm_nonwifi_cmd_buff {
+	u16 len;
+	u8 *start;
+	u8 hdr[IWM_MAX_NONWIFI_HEADERS_SIZE];
+	u8 payload[IWM_MAX_NONWIFI_CMD_BUFF_SIZE];
+};
+
+struct iwm_udma_nonwifi_cmd {
+	u8 opcode;
+	u8 eop;
+	u8 resp;
+	u8 handle_by_hw;
+	__le32 addr;
+	__le32 op1_sz;
+	__le32 op2;
+	__le16 seq_num;
+};
+
+struct iwm_udma_wifi_cmd {
+	__le16 count;
+	u8 eop;
+	u8 credit_group;
+	u8 ra_tid;
+	u8 lmac_offset;
+};
+
+struct iwm_umac_cmd {
+	u8 id;
+	__le16 count;
+	u8 resp;
+	__le16 seq_num;
+	u8 color;
+};
+
+struct iwm_lmac_cmd {
+	u8 id;
+	__le16 count;
+	u8 resp;
+	__le16 seq_num;
+};
+
+struct iwm_nonwifi_cmd {
+	u16 seq_num;
+	bool resp_received;
+	struct list_head pending;
+	struct iwm_udma_nonwifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_lmac_cmd lmac_cmd;
+	struct iwm_nonwifi_cmd_buff buf;
+	u32 flags;
+};
+
+struct iwm_wifi_cmd {
+	u16 seq_num;
+	struct list_head pending;
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_lmac_cmd lmac_cmd;
+	struct iwm_wifi_cmd_buff buf;
+	u32 flags;
+};
+
+void iwm_cmd_flush(struct iwm_priv *iwm);
+
+struct iwm_wifi_cmd *iwm_get_pending_wifi_cmd(struct iwm_priv *iwm,
+					      u16 seq_num);
+struct iwm_nonwifi_cmd *iwm_get_pending_nonwifi_cmd(struct iwm_priv *iwm,
+						    u8 seq_num, u8 cmd_opcode);
+
+
+int iwm_hal_send_target_cmd(struct iwm_priv *iwm,
+			    struct iwm_udma_nonwifi_cmd *ucmd,
+			    const void *payload);
+
+int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  struct iwm_lmac_cmd *lmac_cmd,
+			  const void *payload, u16 payload_size);
+
+int iwm_hal_send_umac_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  const void *payload, u16 payload_size);
+
+u16 iwm_alloc_wifi_cmd_seq(struct iwm_priv *iwm);
+
+void iwm_udma_wifi_hdr_set_eop(struct iwm_priv *iwm, u8 *buf, u8 eop);
+void iwm_build_udma_wifi_hdr(struct iwm_priv *iwm,
+			     struct iwm_udma_out_wifi_hdr *hdr,
+			     struct iwm_udma_wifi_cmd *cmd);
+void iwm_build_umac_hdr(struct iwm_priv *iwm,
+			struct iwm_umac_fw_cmd_hdr *hdr,
+			struct iwm_umac_cmd *cmd);
+#endif /* _IWM_HAL_H_ */
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
new file mode 100644
index 00000000000..635c16ee618
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -0,0 +1,346 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_H__
+#define __IWM_H__
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/cfg80211.h>
+
+#include "debug.h"
+#include "hal.h"
+#include "umac.h"
+#include "lmac.h"
+#include "eeprom.h"
+
+#define IWM_COPYRIGHT "Copyright(c) 2009 Intel Corporation"
+#define IWM_AUTHOR "<ilw@linux.intel.com>"
+
+#define CONFIG_IWM_B0_HW_SUPPORT	1
+
+#define IWM_SRC_LMAC	UMAC_HDI_IN_SOURCE_FHRX
+#define IWM_SRC_UDMA	UMAC_HDI_IN_SOURCE_UDMA
+#define IWM_SRC_UMAC	UMAC_HDI_IN_SOURCE_FW
+#define IWM_SRC_NUM	3
+
+#define IWM_POWER_INDEX_MIN	0
+#define IWM_POWER_INDEX_MAX	5
+#define IWM_POWER_INDEX_DEFAULT	3
+
+struct iwm_conf {
+	u32 sdio_ior_timeout;
+	unsigned long init_calib_map;
+	unsigned long periodic_calib_map;
+	bool reset_on_fatal_err;
+	bool auto_connect;
+	bool wimax_not_present;
+	bool enable_qos;
+	u32 mode;
+
+	u32 power_index;
+	u32 frag_threshold;
+	u32 rts_threshold;
+	bool cts_to_self;
+
+	u32 assoc_timeout;
+	u32 roam_timeout;
+	u32 wireless_mode;
+	u32 coexist_mode;
+
+	u8 ibss_band;
+	u8 ibss_channel;
+
+	u8 mac_addr[ETH_ALEN];
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	bool hw_b0;
+#endif
+};
+
+enum {
+	COEX_MODE_SA = 1,
+	COEX_MODE_XOR,
+	COEX_MODE_CM,
+	COEX_MODE_MAX,
+};
+
+struct iwm_if_ops;
+struct iwm_wifi_cmd;
+
+struct pool_entry {
+	int id;		/* group id */
+	int sid;	/* super group id */
+	int min_pages;	/* min capacity in pages */
+	int max_pages;	/* max capacity in pages */
+	int alloc_pages;	/* allocated # of pages. incresed by driver */
+	int total_freed_pages;	/* total freed # of pages. incresed by UMAC */
+};
+
+struct spool_entry {
+	int id;
+	int max_pages;
+	int alloc_pages;
+};
+
+struct iwm_tx_credit {
+	spinlock_t lock;
+	int pool_nr;
+	unsigned long full_pools_map; /* bitmap for # of filled tx pools */
+	struct pool_entry pools[IWM_MACS_OUT_GROUPS];
+	struct spool_entry spools[IWM_MACS_OUT_SGROUPS];
+};
+
+struct iwm_notif {
+	struct list_head pending;
+	u32 cmd_id;
+	void *cmd;
+	u8 src;
+	void *buf;
+	unsigned long buf_size;
+};
+
+struct iwm_sta_info {
+	u8 addr[ETH_ALEN];
+	bool valid;
+	bool qos;
+	u8 color;
+};
+
+struct iwm_tx_info {
+	u8 sta;
+	u8 color;
+	u8 tid;
+};
+
+struct iwm_rx_info {
+	unsigned long rx_size;
+	unsigned long rx_buf_size;
+};
+
+#define IWM_NUM_KEYS 4
+
+struct iwm_umac_key_hdr {
+	u8 mac[ETH_ALEN];
+	u8 key_idx;
+	u8 multicast; /* BCast encrypt & BCast decrypt of frames FROM mac */
+} __attribute__ ((packed));
+
+struct iwm_key {
+	struct iwm_umac_key_hdr hdr;
+	u8 in_use;
+	u8 alg;
+	u32 flags;
+	u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE];
+	u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE];
+	u8 key_len;
+	u8 key[32];
+};
+
+#define IWM_RX_ID_HASH  0xff
+#define IWM_RX_ID_GET_HASH(id) ((id) % IWM_RX_ID_HASH)
+
+#define IWM_STA_TABLE_NUM	16
+#define IWM_TX_LIST_SIZE	64
+#define IWM_RX_LIST_SIZE        256
+
+#define IWM_SCAN_ID_MAX 0xff
+
+#define IWM_STATUS_READY		0
+#define IWM_STATUS_SCANNING		1
+#define IWM_STATUS_SCAN_ABORTING	2
+#define IWM_STATUS_ASSOCIATING		3
+#define IWM_STATUS_ASSOCIATED		4
+
+#define IWM_RADIO_RFKILL_OFF		0
+#define IWM_RADIO_RFKILL_HW		1
+#define IWM_RADIO_RFKILL_SW		2
+
+struct iwm_tx_queue {
+	int id;
+	struct sk_buff_head queue;
+	struct workqueue_struct *wq;
+	struct work_struct worker;
+	u8 concat_buf[IWM_HAL_CONCATENATE_BUF_SIZE];
+	int concat_count;
+	u8 *concat_ptr;
+};
+
+/* Queues 0 ~ 3 for AC data, 5 for iPAN */
+#define IWM_TX_QUEUES		5
+#define IWM_TX_DATA_QUEUES	4
+#define IWM_TX_CMD_QUEUE	4
+
+struct iwm_bss_info {
+	struct list_head node;
+	struct cfg80211_bss *cfg_bss;
+	struct iwm_umac_notif_bss_info *bss;
+};
+
+typedef int (*iwm_handler)(struct iwm_priv *priv, u8 *buf,
+			   unsigned long buf_size, struct iwm_wifi_cmd *cmd);
+
+#define IWM_WATCHDOG_PERIOD	(6 * HZ)
+
+struct iwm_priv {
+	struct wireless_dev *wdev;
+	struct iwm_if_ops *bus_ops;
+
+	struct iwm_conf conf;
+
+	unsigned long status;
+	unsigned long radio;
+
+	struct list_head pending_notif;
+	wait_queue_head_t notif_queue;
+
+	wait_queue_head_t nonwifi_queue;
+
+	unsigned long calib_done_map;
+	struct {
+		u8 *buf;
+		u32 size;
+	} calib_res[CALIBRATION_CMD_NUM];
+
+	struct iwm_umac_profile *umac_profile;
+	bool umac_profile_active;
+
+	u8 bssid[ETH_ALEN];
+	u8 channel;
+	u16 rate;
+
+	struct iwm_sta_info sta_table[IWM_STA_TABLE_NUM];
+	struct list_head bss_list;
+
+	void (*nonwifi_rx_handlers[UMAC_HDI_IN_OPCODE_NONWIFI_MAX])
+	(struct iwm_priv *priv, u8 *buf, unsigned long buf_size);
+
+	const iwm_handler *umac_handlers;
+	const iwm_handler *lmac_handlers;
+	DECLARE_BITMAP(lmac_handler_map, LMAC_COMMAND_ID_NUM);
+	DECLARE_BITMAP(umac_handler_map, LMAC_COMMAND_ID_NUM);
+	DECLARE_BITMAP(udma_handler_map, LMAC_COMMAND_ID_NUM);
+
+	struct list_head wifi_pending_cmd;
+	struct list_head nonwifi_pending_cmd;
+	u16 wifi_seq_num;
+	u8 nonwifi_seq_num;
+	spinlock_t cmd_lock;
+
+	u32 core_enabled;
+
+	u8 scan_id;
+	struct cfg80211_scan_request *scan_request;
+
+	struct sk_buff_head rx_list;
+	struct list_head rx_tickets;
+	struct list_head rx_packets[IWM_RX_ID_HASH];
+	struct workqueue_struct *rx_wq;
+	struct work_struct rx_worker;
+
+	struct iwm_tx_credit tx_credit;
+	struct iwm_tx_queue txq[IWM_TX_QUEUES];
+
+	struct iwm_key keys[IWM_NUM_KEYS];
+	struct iwm_key *default_key;
+
+	wait_queue_head_t mlme_queue;
+
+	struct iw_statistics wstats;
+	struct delayed_work stats_request;
+
+	struct iwm_debugfs dbg;
+
+	u8 *eeprom;
+	struct timer_list watchdog;
+	struct work_struct reset_worker;
+	struct rfkill *rfkill;
+
+	char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+static inline void *iwm_private(struct iwm_priv *iwm)
+{
+	BUG_ON(!iwm);
+	return &iwm->private;
+}
+
+#define hw_to_iwm(h) (h->iwm)
+#define iwm_to_dev(i) (wiphy_dev(i->wdev->wiphy))
+#define iwm_to_wiphy(i) (i->wdev->wiphy)
+#define wiphy_to_iwm(w) (struct iwm_priv *)(wiphy_priv(w))
+#define iwm_to_wdev(i) (i->wdev)
+#define wdev_to_iwm(w) (struct iwm_priv *)(wdev_priv(w))
+#define iwm_to_ndev(i) (i->wdev->netdev)
+#define ndev_to_iwm(n) (wdev_to_iwm(n->ieee80211_ptr))
+#define skb_to_rx_info(s) ((struct iwm_rx_info *)(s->cb))
+#define skb_to_tx_info(s) ((struct iwm_tx_info *)s->cb)
+
+extern const struct iw_handler_def iwm_iw_handler_def;
+
+void *iwm_if_alloc(int sizeof_bus, struct device *dev,
+		   struct iwm_if_ops *if_ops);
+void iwm_if_free(struct iwm_priv *iwm);
+int iwm_mode_to_nl80211_iftype(int mode);
+int iwm_priv_init(struct iwm_priv *iwm);
+void iwm_reset(struct iwm_priv *iwm);
+void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
+			      struct iwm_umac_notif_alive *alive);
+int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb);
+int iwm_notif_send(struct iwm_priv *iwm, struct iwm_wifi_cmd *cmd,
+		   u8 cmd_id, u8 source, u8 *buf, unsigned long buf_size);
+int iwm_notif_handle(struct iwm_priv *iwm, u32 cmd, u8 source, long timeout);
+void iwm_init_default_profile(struct iwm_priv *iwm,
+			      struct iwm_umac_profile *profile);
+void iwm_link_on(struct iwm_priv *iwm);
+void iwm_link_off(struct iwm_priv *iwm);
+int iwm_up(struct iwm_priv *iwm);
+int iwm_down(struct iwm_priv *iwm);
+
+/* TX API */
+void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages);
+void iwm_tx_worker(struct work_struct *work);
+int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+
+/* RX API */
+void iwm_rx_setup_handlers(struct iwm_priv *iwm);
+int iwm_rx_handle(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size);
+int iwm_rx_handle_resp(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size,
+		       struct iwm_wifi_cmd *cmd);
+void iwm_rx_free(struct iwm_priv *iwm);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
new file mode 100644
index 00000000000..db2e5eea189
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -0,0 +1,457 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_LMAC_H__
+#define __IWM_LMAC_H__
+
+struct iwm_lmac_hdr {
+	u8 id;
+	u8 flags;
+	__le16 seq_num;
+} __attribute__ ((packed));
+
+/* LMAC commands */
+#define CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_AFTER_MSK  0x1
+
+struct iwm_lmac_cal_cfg_elt {
+	__le32 enable; /* 1 means LMAC needs to do something */
+	__le32 start;  /* 1 to start calibration, 0 to stop */
+	__le32 send_res; /* 1 for sending back results */
+	__le32 apply_res; /* 1 for applying calibration results to HW */
+	__le32 reserved;
+} __attribute__ ((packed));
+
+struct iwm_lmac_cal_cfg_status {
+	struct iwm_lmac_cal_cfg_elt init;
+	struct iwm_lmac_cal_cfg_elt periodic;
+	__le32 flags; /* CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_AFTER_MSK */
+} __attribute__ ((packed));
+
+struct iwm_lmac_cal_cfg_cmd {
+	struct iwm_lmac_cal_cfg_status ucode_cfg;
+	struct iwm_lmac_cal_cfg_status driver_cfg;
+	__le32 reserved;
+} __attribute__ ((packed));
+
+struct iwm_lmac_cal_cfg_resp {
+	__le32 status;
+} __attribute__ ((packed));
+
+#define IWM_CARD_STATE_SW_HW_ENABLED	0x00
+#define IWM_CARD_STATE_HW_DISABLED	0x01
+#define IWM_CARD_STATE_SW_DISABLED	0x02
+#define IWM_CARD_STATE_CTKILL_DISABLED	0x04
+#define IWM_CARD_STATE_IS_RXON		0x10
+
+struct iwm_lmac_card_state {
+	__le32 flags;
+} __attribute__ ((packed));
+
+/**
+ * COEX_PRIORITY_TABLE_CMD
+ *
+ * Priority entry for each state
+ * Will keep two tables, for STA and WIPAN
+ */
+enum {
+	/* UN-ASSOCIATION PART */
+	COEX_UNASSOC_IDLE = 0,
+	COEX_UNASSOC_MANUAL_SCAN,
+	COEX_UNASSOC_AUTO_SCAN,
+
+	/* CALIBRATION */
+	COEX_CALIBRATION,
+	COEX_PERIODIC_CALIBRATION,
+
+	/* CONNECTION */
+	COEX_CONNECTION_ESTAB,
+
+	/* ASSOCIATION PART */
+	COEX_ASSOCIATED_IDLE,
+	COEX_ASSOC_MANUAL_SCAN,
+	COEX_ASSOC_AUTO_SCAN,
+	COEX_ASSOC_ACTIVE_LEVEL,
+
+	/* RF ON/OFF */
+	COEX_RF_ON,
+	COEX_RF_OFF,
+	COEX_STAND_ALONE_DEBUG,
+
+	/* IPNN */
+	COEX_IPAN_ASSOC_LEVEL,
+
+	/* RESERVED */
+	COEX_RSRVD1,
+	COEX_RSRVD2,
+
+	COEX_EVENTS_NUM
+};
+
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK	0x1
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK	0x2
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK	0x4
+
+struct coex_event {
+	u8 req_prio;
+	u8 win_med_prio;
+	u8 reserved;
+	u8 flags;
+} __attribute__ ((packed));
+
+#define COEX_FLAGS_STA_TABLE_VALID_MSK		0x1
+#define COEX_FLAGS_UNASSOC_WAKEUP_UMASK_MSK	0x4
+#define COEX_FLAGS_ASSOC_WAKEUP_UMASK_MSK	0x8
+#define COEX_FLAGS_COEX_ENABLE_MSK		0x80
+
+struct iwm_coex_prio_table_cmd {
+	u8 flags;
+	u8 reserved[3];
+	struct coex_event sta_prio[COEX_EVENTS_NUM];
+} __attribute__ ((packed));
+
+/* Coexistence definitions
+ *
+ * Constants to fill in the Priorities' Tables
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ * FLAGS - Combination of COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK and
+ * 	   COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK
+ */
+
+#define COEX_UNASSOC_IDLE_FLAGS		0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_CALIBRATION_FLAGS		(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_PERIODIC_CALIBRATION_FLAGS	0
+/* COEX_CONNECTION_ESTAB: we need DELAY_MEDIUM_FREE_NTFY to let WiMAX
+ * disconnect from network. */
+#define COEX_CONNECTION_ESTAB_FLAGS (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
+				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
+#define COEX_ASSOCIATED_IDLE_FLAGS	0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS	0
+#define COEX_RF_ON_FLAGS		0
+#define COEX_RF_OFF_FLAGS		0
+#define COEX_STAND_ALONE_DEBUG_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
+				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
+#define COEX_RSRVD1_FLAGS		0
+#define COEX_RSRVD2_FLAGS		0
+/* XOR_RF_ON is the event wrapping all radio ownership. We need
+ * DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. */
+#define COEX_XOR_RF_ON_FLAGS	    (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
+				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
+
+/* LMAC OP CODES */
+#define REPLY_PAD			0x0
+#define REPLY_ALIVE			0x1
+#define REPLY_ERROR			0x2
+#define REPLY_ECHO			0x3
+#define REPLY_HALT			0x6
+
+/* RXON state commands */
+#define REPLY_RX_ON			0x10
+#define REPLY_RX_ON_ASSOC		0x11
+#define REPLY_RX_OFF			0x12
+#define REPLY_QOS_PARAM			0x13
+#define REPLY_RX_ON_TIMING		0x14
+#define REPLY_INTERNAL_QOS_PARAM	0x15
+#define REPLY_RX_INT_TIMEOUT_CNFG	0x16
+#define REPLY_NULL			0x17
+
+/* Multi-Station support */
+#define REPLY_ADD_STA			0x18
+#define REPLY_REMOVE_STA		0x19
+#define REPLY_RESET_ALL_STA		0x1a
+
+/* RX, TX */
+#define REPLY_ALM_RX			0x1b
+#define REPLY_TX			0x1c
+#define REPLY_TXFIFO_FLUSH		0x1e
+
+/* MISC commands */
+#define REPLY_MGMT_MCAST_KEY		0x1f
+#define REPLY_WEPKEY			0x20
+#define REPLY_INIT_IV			0x21
+#define REPLY_WRITE_MIB			0x22
+#define REPLY_READ_MIB			0x23
+#define REPLY_RADIO_FE			0x24
+#define REPLY_TXFIFO_CFG		0x25
+#define REPLY_WRITE_READ		0x26
+#define REPLY_INSTALL_SEC_KEY		0x27
+
+
+#define REPLY_RATE_SCALE		0x47
+#define REPLY_LEDS_CMD			0x48
+#define REPLY_TX_LINK_QUALITY_CMD	0x4e
+#define REPLY_ANA_MIB_OVERRIDE_CMD	0x4f
+#define REPLY_WRITE2REG_CMD		0x50
+
+/* winfi-wifi coexistence */
+#define COEX_PRIORITY_TABLE_CMD		0x5a
+#define COEX_MEDIUM_NOTIFICATION	0x5b
+#define COEX_EVENT_CMD			0x5c
+
+/* more Protocol and Protocol-test commands */
+#define REPLY_MAX_SLEEP_TIME_CMD	0x61
+#define CALIBRATION_CFG_CMD		0x65
+#define CALIBRATION_RES_NOTIFICATION	0x66
+#define CALIBRATION_COMPLETE_NOTIFICATION	0x67
+
+/* Measurements */
+#define REPLY_QUIET_CMD			0x71
+#define REPLY_CHANNEL_SWITCH		0x72
+#define CHANNEL_SWITCH_NOTIFICATION	0x73
+
+#define REPLY_SPECTRUM_MEASUREMENT_CMD	0x74
+#define SPECTRUM_MEASURE_NOTIFICATION	0x75
+#define REPLY_MEASUREMENT_ABORT_CMD	0x76
+
+/* Power Management */
+#define POWER_TABLE_CMD			0x77
+#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define REPLY_WATERMARK_CMD		0x79
+#define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
+#define PD_FLUSH_N_NOTIFICATION		0x7C
+
+/* Scan commands and notifications */
+#define REPLY_SCAN_REQUEST_CMD		0x80
+#define REPLY_SCAN_ABORT_CMD		0x81
+#define SCAN_START_NOTIFICATION		0x82
+#define SCAN_RESULTS_NOTIFICATION	0x83
+#define SCAN_COMPLETE_NOTIFICATION	0x84
+
+/* Continuous TX commands */
+#define REPLY_CONT_TX_CMD		0x85
+#define END_OF_CONT_TX_NOTIFICATION	0x86
+
+/* Timer/Eeprom commands */
+#define TIMER_CMD			0x87
+#define EEPROM_WRITE_CMD		0x88
+
+/* PAPD commands */
+#define FEEDBACK_REQUEST_NOTIFICATION	0x8b
+#define REPLY_CW_CMD			0x8c
+
+/* IBSS/AP commands Continue */
+#define BEACON_NOTIFICATION		0x90
+#define REPLY_TX_BEACON			0x91
+#define REPLY_REQUEST_ATIM		0x93
+#define WHO_IS_AWAKE_NOTIFICATION	0x94
+#define TX_PWR_DBM_LIMIT_CMD		0x95
+#define QUIET_NOTIFICATION		0x96
+#define TX_PWR_TABLE_CMD		0x97
+#define TX_ANT_CONFIGURATION_CMD	0x98
+#define MEASURE_ABORT_NOTIFICATION	0x99
+#define REPLY_CALIBRATION_TUNE		0x9a
+
+/* bt config command */
+#define REPLY_BT_CONFIG			0x9b
+#define REPLY_STATISTICS_CMD		0x9c
+#define STATISTICS_NOTIFICATION		0x9d
+
+/* RF-KILL commands and notifications */
+#define REPLY_CARD_STATE_CMD		0xa0
+#define CARD_STATE_NOTIFICATION		0xa1
+
+/* Missed beacons notification */
+#define MISSED_BEACONS_NOTIFICATION	0xa2
+#define MISSED_BEACONS_NOTIFICATION_TH_CMD	0xa3
+
+#define REPLY_CT_KILL_CONFIG_CMD	0xa4
+
+/* HD commands and notifications */
+#define REPLY_HD_PARAMS_CMD		0xa6
+#define HD_PARAMS_NOTIFICATION		0xa7
+#define SENSITIVITY_CMD			0xa8
+#define U_APSD_PARAMS_CMD		0xa9
+#define NOISY_PLATFORM_CMD		0xaa
+#define ILLEGAL_CMD			0xac
+#define REPLY_PHY_CALIBRATION_CMD	0xb0
+#define REPLAY_RX_GAIN_CALIB_CMD	0xb1
+
+/* WiPAN commands */
+#define REPLY_WIPAN_PARAMS_CMD		0xb2
+#define REPLY_WIPAN_RX_ON_CMD		0xb3
+#define REPLY_WIPAN_RX_ON_TIMING	0xb4
+#define REPLY_WIPAN_TX_PWR_TABLE_CMD	0xb5
+#define REPLY_WIPAN_RXON_ASSOC_CMD	0xb6
+#define REPLY_WIPAN_QOS_PARAM		0xb7
+#define WIPAN_REPLY_WEPKEY		0xb8
+
+/* BeamForming commands */
+#define BEAMFORMER_CFG_CMD		0xba
+#define BEAMFORMEE_NOTIFICATION		0xbb
+
+/* TGn new Commands */
+#define REPLY_RX_PHY_CMD		0xc0
+#define REPLY_RX_MPDU_CMD		0xc1
+#define REPLY_MULTICAST_HASH		0xc2
+#define REPLY_KDR_RX			0xc3
+#define REPLY_RX_DSP_EXT_INFO		0xc4
+#define REPLY_COMPRESSED_BA		0xc5
+
+/* PNC commands */
+#define PNC_CONFIG_CMD			0xc8
+#define PNC_UPDATE_TABLE_CMD		0xc9
+#define XVT_GENERAL_CTRL_CMD		0xca
+#define REPLY_LEGACY_RADIO_FE		0xdd
+
+/* WoWLAN commands */
+#define WOWLAN_PATTERNS			0xe0
+#define WOWLAN_WAKEUP_FILTER		0xe1
+#define WOWLAN_TSC_RSC_PARAM		0xe2
+#define WOWLAN_TKIP_PARAM		0xe3
+#define WOWLAN_KEK_KCK_MATERIAL		0xe4
+#define WOWLAN_GET_STATUSES		0xe5
+#define WOWLAN_TX_POWER_PER_DB		0xe6
+#define REPLY_WOWLAN_GET_STATUSES       WOWLAN_GET_STATUSES
+
+#define REPLY_DEBUG_CMD			0xf0
+#define REPLY_DSP_DEBUG_CMD		0xf1
+#define REPLY_DEBUG_MONITOR_CMD		0xf2
+#define REPLY_DEBUG_XVT_CMD		0xf3
+#define REPLY_DEBUG_DC_CALIB		0xf4
+#define REPLY_DYNAMIC_BP		0xf5
+
+/* General purpose Commands */
+#define REPLY_GP1_CMD			0xfa
+#define REPLY_GP2_CMD			0xfb
+#define REPLY_GP3_CMD			0xfc
+#define REPLY_GP4_CMD			0xfd
+#define REPLY_REPLAY_WRAPPER		0xfe
+#define REPLY_FRAME_DURATION_CALC_CMD	0xff
+
+#define LMAC_COMMAND_ID_MAX		0xff
+#define LMAC_COMMAND_ID_NUM		(LMAC_COMMAND_ID_MAX + 1)
+
+
+/* Calibration */
+
+enum {
+	PHY_CALIBRATE_DC_CMD			= 0,
+	PHY_CALIBRATE_LO_CMD			= 1,
+	PHY_CALIBRATE_RX_BB_CMD			= 2,
+	PHY_CALIBRATE_TX_IQ_CMD			= 3,
+	PHY_CALIBRATE_RX_IQ_CMD			= 4,
+	PHY_CALIBRATION_NOISE_CMD		= 5,
+	PHY_CALIBRATE_AGC_TABLE_CMD		= 6,
+	PHY_CALIBRATE_CRYSTAL_FRQ_CMD		= 7,
+	PHY_CALIBRATE_OPCODES_NUM,
+	SHILOH_PHY_CALIBRATE_DC_CMD		= 8,
+	SHILOH_PHY_CALIBRATE_LO_CMD		= 9,
+	SHILOH_PHY_CALIBRATE_RX_BB_CMD		= 10,
+	SHILOH_PHY_CALIBRATE_TX_IQ_CMD		= 11,
+	SHILOH_PHY_CALIBRATE_RX_IQ_CMD		= 12,
+	SHILOH_PHY_CALIBRATION_NOISE_CMD	= 13,
+	SHILOH_PHY_CALIBRATE_AGC_TABLE_CMD	= 14,
+	SHILOH_PHY_CALIBRATE_CRYSTAL_FRQ_CMD	= 15,
+	SHILOH_PHY_CALIBRATE_BASE_BAND_CMD	= 16,
+	SHILOH_PHY_CALIBRATE_TXIQ_PERIODIC_CMD	= 17,
+	CALIBRATION_CMD_NUM,
+};
+
+struct iwm_lmac_calib_hdr {
+	u8 opcode;
+	u8 first_grp;
+	u8 grp_num;
+	u8 all_data_valid;
+} __attribute__ ((packed));
+
+#define IWM_LMAC_CALIB_FREQ_GROUPS_NR	7
+#define IWM_CALIB_FREQ_GROUPS_NR	5
+#define IWM_CALIB_DC_MODES_NR		12
+
+struct iwm_calib_rxiq_entry {
+	u16 ptam_postdist_ars;
+	u16 ptam_postdist_arc;
+} __attribute__ ((packed));
+
+struct iwm_calib_rxiq_group {
+	struct iwm_calib_rxiq_entry mode[IWM_CALIB_DC_MODES_NR];
+} __attribute__ ((packed));
+
+struct iwm_lmac_calib_rxiq {
+	struct iwm_calib_rxiq_group group[IWM_LMAC_CALIB_FREQ_GROUPS_NR];
+} __attribute__ ((packed));
+
+struct iwm_calib_rxiq {
+	struct iwm_lmac_calib_hdr hdr;
+	struct iwm_calib_rxiq_group group[IWM_CALIB_FREQ_GROUPS_NR];
+} __attribute__ ((packed));
+
+#define LMAC_STA_ID_SEED	0x0f
+#define LMAC_STA_ID_POS		0
+
+#define LMAC_STA_COLOR_SEED	0x7
+#define LMAC_STA_COLOR_POS	4
+
+struct iwm_lmac_power_report {
+	u8 pa_status;
+	u8 pa_integ_res_A[3];
+	u8 pa_integ_res_B[3];
+	u8 pa_integ_res_C[3];
+} __attribute__ ((packed));
+
+struct iwm_lmac_tx_resp {
+	u8 frame_cnt; /* 1-no aggregation, greater then 1 - aggregation */
+	u8 bt_kill_cnt;
+	__le16 retry_cnt;
+	__le32 initial_tx_rate;
+	__le16 wireless_media_time;
+	struct iwm_lmac_power_report power_report;
+	__le32 tfd_info;
+	__le16 seq_ctl;
+	__le16 byte_cnt;
+	u8 tlc_rate_info;
+	u8 ra_tid;
+	__le16 frame_ctl;
+	__le32 status;
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
new file mode 100644
index 00000000000..6a2640f16b6
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -0,0 +1,680 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "bus.h"
+#include "umac.h"
+#include "commands.h"
+#include "hal.h"
+#include "fw.h"
+#include "rx.h"
+
+static struct iwm_conf def_iwm_conf = {
+
+	.sdio_ior_timeout	= 5000,
+	.init_calib_map		= BIT(PHY_CALIBRATE_DC_CMD)	|
+				  BIT(PHY_CALIBRATE_LO_CMD)	|
+				  BIT(PHY_CALIBRATE_TX_IQ_CMD)	|
+				  BIT(PHY_CALIBRATE_RX_IQ_CMD),
+	.periodic_calib_map	= BIT(PHY_CALIBRATE_DC_CMD)	|
+				  BIT(PHY_CALIBRATE_LO_CMD)	|
+				  BIT(PHY_CALIBRATE_TX_IQ_CMD)	|
+				  BIT(PHY_CALIBRATE_RX_IQ_CMD)	|
+				  BIT(SHILOH_PHY_CALIBRATE_BASE_BAND_CMD),
+	.reset_on_fatal_err	= 1,
+	.auto_connect		= 1,
+	.wimax_not_present	= 0,
+	.enable_qos		= 1,
+	.mode			= UMAC_MODE_BSS,
+
+	/* UMAC configuration */
+	.power_index		= 0,
+	.frag_threshold		= IEEE80211_MAX_FRAG_THRESHOLD,
+	.rts_threshold		= IEEE80211_MAX_RTS_THRESHOLD,
+	.cts_to_self		= 0,
+
+	.assoc_timeout		= 2,
+	.roam_timeout		= 10,
+	.wireless_mode		= WIRELESS_MODE_11A | WIRELESS_MODE_11G,
+	.coexist_mode		= COEX_MODE_CM,
+
+	/* IBSS */
+	.ibss_band		= UMAC_BAND_2GHZ,
+	.ibss_channel		= 1,
+
+	.mac_addr		= {0x00, 0x02, 0xb3, 0x01, 0x02, 0x03},
+};
+
+static int modparam_reset;
+module_param_named(reset, modparam_reset, bool, 0644);
+MODULE_PARM_DESC(reset, "reset on firmware errors (default 0 [not reset])");
+
+int iwm_mode_to_nl80211_iftype(int mode)
+{
+	switch (mode) {
+	case UMAC_MODE_BSS:
+		return NL80211_IFTYPE_STATION;
+	case UMAC_MODE_IBSS:
+		return NL80211_IFTYPE_ADHOC;
+	default:
+		return NL80211_IFTYPE_UNSPECIFIED;
+	}
+
+	return 0;
+}
+
+static void iwm_statistics_request(struct work_struct *work)
+{
+	struct iwm_priv *iwm =
+		container_of(work, struct iwm_priv, stats_request.work);
+
+	iwm_send_umac_stats_req(iwm, 0);
+}
+
+static void iwm_reset_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	struct iwm_umac_profile *profile = NULL;
+	int uninitialized_var(ret), retry = 0;
+
+	iwm = container_of(work, struct iwm_priv, reset_worker);
+
+	if (iwm->umac_profile_active) {
+		profile = kmalloc(sizeof(struct iwm_umac_profile), GFP_KERNEL);
+		if (profile)
+			memcpy(profile, iwm->umac_profile, sizeof(*profile));
+		else
+			IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
+	}
+
+	iwm_down(iwm);
+
+	while (retry++ < 3) {
+		ret = iwm_up(iwm);
+		if (!ret)
+			break;
+
+		schedule_timeout_uninterruptible(10 * HZ);
+	}
+
+	if (ret) {
+		IWM_WARN(iwm, "iwm_up() failed: %d\n", ret);
+
+		kfree(profile);
+		return;
+	}
+
+	if (profile) {
+		IWM_DBG_MLME(iwm, DBG, "Resend UMAC profile\n");
+		memcpy(iwm->umac_profile, profile, sizeof(*profile));
+		iwm_send_mlme_profile(iwm);
+		kfree(profile);
+	}
+}
+
+static void iwm_watchdog(unsigned long data)
+{
+	struct iwm_priv *iwm = (struct iwm_priv *)data;
+
+	IWM_WARN(iwm, "Watchdog expired: UMAC stalls!\n");
+
+	if (modparam_reset)
+		schedule_work(&iwm->reset_worker);
+}
+
+int iwm_priv_init(struct iwm_priv *iwm)
+{
+	int i;
+	char name[32];
+
+	iwm->status = 0;
+	INIT_LIST_HEAD(&iwm->pending_notif);
+	init_waitqueue_head(&iwm->notif_queue);
+	init_waitqueue_head(&iwm->nonwifi_queue);
+	init_waitqueue_head(&iwm->mlme_queue);
+	memcpy(&iwm->conf, &def_iwm_conf, sizeof(struct iwm_conf));
+	spin_lock_init(&iwm->tx_credit.lock);
+	INIT_LIST_HEAD(&iwm->wifi_pending_cmd);
+	INIT_LIST_HEAD(&iwm->nonwifi_pending_cmd);
+	iwm->wifi_seq_num = UMAC_WIFI_SEQ_NUM_BASE;
+	iwm->nonwifi_seq_num = UMAC_NONWIFI_SEQ_NUM_BASE;
+	spin_lock_init(&iwm->cmd_lock);
+	iwm->scan_id = 1;
+	INIT_DELAYED_WORK(&iwm->stats_request, iwm_statistics_request);
+	INIT_WORK(&iwm->reset_worker, iwm_reset_worker);
+	INIT_LIST_HEAD(&iwm->bss_list);
+
+	skb_queue_head_init(&iwm->rx_list);
+	INIT_LIST_HEAD(&iwm->rx_tickets);
+	for (i = 0; i < IWM_RX_ID_HASH; i++)
+		INIT_LIST_HEAD(&iwm->rx_packets[i]);
+
+	INIT_WORK(&iwm->rx_worker, iwm_rx_worker);
+
+	iwm->rx_wq = create_singlethread_workqueue(KBUILD_MODNAME "_rx");
+	if (!iwm->rx_wq)
+		return -EAGAIN;
+
+	for (i = 0; i < IWM_TX_QUEUES; i++) {
+		INIT_WORK(&iwm->txq[i].worker, iwm_tx_worker);
+		snprintf(name, 32, KBUILD_MODNAME "_tx_%d", i);
+		iwm->txq[i].id = i;
+		iwm->txq[i].wq = create_singlethread_workqueue(name);
+		if (!iwm->txq[i].wq)
+			return -EAGAIN;
+
+		skb_queue_head_init(&iwm->txq[i].queue);
+	}
+
+	for (i = 0; i < IWM_NUM_KEYS; i++)
+		memset(&iwm->keys[i], 0, sizeof(struct iwm_key));
+
+	iwm->default_key = NULL;
+
+	init_timer(&iwm->watchdog);
+	iwm->watchdog.function = iwm_watchdog;
+	iwm->watchdog.data = (unsigned long)iwm;
+
+	return 0;
+}
+
+/*
+ * We reset all the structures, and we reset the UMAC.
+ * After calling this routine, you're expected to reload
+ * the firmware.
+ */
+void iwm_reset(struct iwm_priv *iwm)
+{
+	struct iwm_notif *notif, *next;
+
+	if (test_bit(IWM_STATUS_READY, &iwm->status))
+		iwm_target_reset(iwm);
+
+	iwm->status = 0;
+	iwm->scan_id = 1;
+
+	list_for_each_entry_safe(notif, next, &iwm->pending_notif, pending) {
+		list_del(&notif->pending);
+		kfree(notif->buf);
+		kfree(notif);
+	}
+
+	iwm_cmd_flush(iwm);
+
+	flush_workqueue(iwm->rx_wq);
+
+	iwm_link_off(iwm);
+}
+
+/*
+ * Notification code:
+ *
+ * We're faced with the following issue: Any host command can
+ * have an answer or not, and if there's an answer to expect,
+ * it can be treated synchronously or asynchronously.
+ * To work around the synchronous answer case, we implemented
+ * our notification mechanism.
+ * When a code path needs to wait for a command response
+ * synchronously, it calls notif_handle(), which waits for the
+ * right notification to show up, and then process it. Before
+ * starting to wait, it registered as a waiter for this specific
+ * answer (by toggling a bit in on of the handler_map), so that
+ * the rx code knows that it needs to send a notification to the
+ * waiting processes. It does so by calling iwm_notif_send(),
+ * which adds the notification to the pending notifications list,
+ * and then wakes the waiting processes up.
+ */
+int iwm_notif_send(struct iwm_priv *iwm, struct iwm_wifi_cmd *cmd,
+		   u8 cmd_id, u8 source, u8 *buf, unsigned long buf_size)
+{
+	struct iwm_notif *notif;
+
+	notif = kzalloc(sizeof(struct iwm_notif), GFP_KERNEL);
+	if (!notif) {
+		IWM_ERR(iwm, "Couldn't alloc memory for notification\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&notif->pending);
+	notif->cmd = cmd;
+	notif->cmd_id = cmd_id;
+	notif->src = source;
+	notif->buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!notif->buf) {
+		IWM_ERR(iwm, "Couldn't alloc notification buffer\n");
+		kfree(notif);
+		return -ENOMEM;
+	}
+	notif->buf_size = buf_size;
+	memcpy(notif->buf, buf, buf_size);
+	list_add_tail(&notif->pending, &iwm->pending_notif);
+
+	wake_up_interruptible(&iwm->notif_queue);
+
+	return 0;
+}
+
+static struct iwm_notif *iwm_notif_find(struct iwm_priv *iwm, u32 cmd,
+					u8 source)
+{
+	struct iwm_notif *notif, *next;
+
+	list_for_each_entry_safe(notif, next, &iwm->pending_notif, pending) {
+		if ((notif->cmd_id == cmd) && (notif->src == source)) {
+			list_del(&notif->pending);
+			return notif;
+		}
+	}
+
+	return NULL;
+}
+
+static struct iwm_notif *iwm_notif_wait(struct iwm_priv *iwm, u32 cmd,
+					u8 source, long timeout)
+{
+	int ret;
+	struct iwm_notif *notif;
+	unsigned long *map = NULL;
+
+	switch (source) {
+	case IWM_SRC_LMAC:
+		map = &iwm->lmac_handler_map[0];
+		break;
+	case IWM_SRC_UMAC:
+		map = &iwm->umac_handler_map[0];
+		break;
+	case IWM_SRC_UDMA:
+		map = &iwm->udma_handler_map[0];
+		break;
+	}
+
+	set_bit(cmd, map);
+
+	ret = wait_event_interruptible_timeout(iwm->notif_queue,
+			 ((notif = iwm_notif_find(iwm, cmd, source)) != NULL),
+					       timeout);
+	clear_bit(cmd, map);
+
+	if (!ret)
+		return NULL;
+
+	return notif;
+}
+
+int iwm_notif_handle(struct iwm_priv *iwm, u32 cmd, u8 source, long timeout)
+{
+	int ret;
+	struct iwm_notif *notif;
+
+	notif = iwm_notif_wait(iwm, cmd, source, timeout);
+	if (!notif)
+		return -ETIME;
+
+	ret = iwm_rx_handle_resp(iwm, notif->buf, notif->buf_size, notif->cmd);
+	kfree(notif->buf);
+	kfree(notif);
+
+	return ret;
+}
+
+static int iwm_config_boot_params(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	int ret;
+
+	/* check Wimax is off and config debug monitor */
+	if (iwm->conf.wimax_not_present) {
+		u32 data1 = 0x1f;
+		u32 addr1 = 0x606BE258;
+
+		u32 data2_set = 0x0;
+		u32 data2_clr = 0x1;
+		u32 addr2 = 0x606BE100;
+
+		u32 data3 = 0x1;
+		u32 addr3 = 0x606BEC00;
+
+		target_cmd.resp = 0;
+		target_cmd.handle_by_hw = 0;
+		target_cmd.eop = 1;
+
+		target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+		target_cmd.addr = cpu_to_le32(addr1);
+		target_cmd.op1_sz = cpu_to_le32(sizeof(u32));
+		target_cmd.op2 = 0;
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, &data1);
+		if (ret < 0) {
+			IWM_ERR(iwm, "iwm_hal_send_target_cmd failed\n");
+			return ret;
+		}
+
+		target_cmd.opcode = UMAC_HDI_OUT_OPCODE_READ_MODIFY_WRITE;
+		target_cmd.addr = cpu_to_le32(addr2);
+		target_cmd.op1_sz = cpu_to_le32(data2_set);
+		target_cmd.op2 = cpu_to_le32(data2_clr);
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, &data1);
+		if (ret < 0) {
+			IWM_ERR(iwm, "iwm_hal_send_target_cmd failed\n");
+			return ret;
+		}
+
+		target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+		target_cmd.addr = cpu_to_le32(addr3);
+		target_cmd.op1_sz = cpu_to_le32(sizeof(u32));
+		target_cmd.op2 = 0;
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, &data3);
+		if (ret < 0) {
+			IWM_ERR(iwm, "iwm_hal_send_target_cmd failed\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+void iwm_init_default_profile(struct iwm_priv *iwm,
+			      struct iwm_umac_profile *profile)
+{
+	memset(profile, 0, sizeof(struct iwm_umac_profile));
+
+	profile->sec.auth_type = UMAC_AUTH_TYPE_OPEN;
+	profile->sec.flags = UMAC_SEC_FLG_LEGACY_PROFILE;
+	profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_NONE;
+	profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_NONE;
+
+	if (iwm->conf.enable_qos)
+		profile->flags |= cpu_to_le16(UMAC_PROFILE_QOS_ALLOWED);
+
+	profile->wireless_mode = iwm->conf.wireless_mode;
+	profile->mode = cpu_to_le32(iwm->conf.mode);
+
+	profile->ibss.atim = 0;
+	profile->ibss.beacon_interval = 100;
+	profile->ibss.join_only = 0;
+	profile->ibss.band = iwm->conf.ibss_band;
+	profile->ibss.channel = iwm->conf.ibss_channel;
+}
+
+void iwm_link_on(struct iwm_priv *iwm)
+{
+	netif_carrier_on(iwm_to_ndev(iwm));
+	netif_tx_wake_all_queues(iwm_to_ndev(iwm));
+
+	iwm_send_umac_stats_req(iwm, 0);
+}
+
+void iwm_link_off(struct iwm_priv *iwm)
+{
+	struct iw_statistics *wstats = &iwm->wstats;
+	int i;
+
+	netif_tx_stop_all_queues(iwm_to_ndev(iwm));
+	netif_carrier_off(iwm_to_ndev(iwm));
+
+	for (i = 0; i < IWM_TX_QUEUES; i++) {
+		skb_queue_purge(&iwm->txq[i].queue);
+
+		iwm->txq[i].concat_count = 0;
+		iwm->txq[i].concat_ptr = iwm->txq[i].concat_buf;
+
+		flush_workqueue(iwm->txq[i].wq);
+	}
+
+	iwm_rx_free(iwm);
+
+	cancel_delayed_work(&iwm->stats_request);
+	memset(wstats, 0, sizeof(struct iw_statistics));
+	wstats->qual.updated = IW_QUAL_ALL_INVALID;
+
+	del_timer_sync(&iwm->watchdog);
+}
+
+static void iwm_bss_list_clean(struct iwm_priv *iwm)
+{
+	struct iwm_bss_info *bss, *next;
+
+	list_for_each_entry_safe(bss, next, &iwm->bss_list, node) {
+		list_del(&bss->node);
+		kfree(bss->bss);
+		kfree(bss);
+	}
+}
+
+static int iwm_channels_init(struct iwm_priv *iwm)
+{
+	int ret;
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (iwm->conf.hw_b0) {
+		IWM_INFO(iwm, "Workaround EEPROM channels for B0 hardware\n");
+		return 0;
+	}
+#endif
+
+	ret = iwm_send_umac_channel_list(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Send channel list failed\n");
+		return ret;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Didn't get a channel list notification\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int iwm_up(struct iwm_priv *iwm)
+{
+	int ret;
+	struct iwm_notif *notif_reboot, *notif_ack = NULL;
+
+	ret = iwm_bus_enable(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Couldn't enable function\n");
+		return ret;
+	}
+
+	iwm_rx_setup_handlers(iwm);
+
+	/* Wait for initial BARKER_REBOOT from hardware */
+	notif_reboot = iwm_notif_wait(iwm, IWM_BARKER_REBOOT_NOTIFICATION,
+				      IWM_SRC_UDMA, 2 * HZ);
+	if (!notif_reboot) {
+		IWM_ERR(iwm, "Wait for REBOOT_BARKER timeout\n");
+		goto err_disable;
+	}
+
+	/* We send the barker back */
+	ret = iwm_bus_send_chunk(iwm, notif_reboot->buf, 16);
+	if (ret) {
+		IWM_ERR(iwm, "REBOOT barker response failed\n");
+		kfree(notif_reboot);
+		goto err_disable;
+	}
+
+	kfree(notif_reboot->buf);
+	kfree(notif_reboot);
+
+	/* Wait for ACK_BARKER from hardware */
+	notif_ack = iwm_notif_wait(iwm, IWM_ACK_BARKER_NOTIFICATION,
+				   IWM_SRC_UDMA, 2 * HZ);
+	if (!notif_ack) {
+		IWM_ERR(iwm, "Wait for ACK_BARKER timeout\n");
+		goto err_disable;
+	}
+
+	kfree(notif_ack->buf);
+	kfree(notif_ack);
+
+	/* We start to config static boot parameters */
+	ret = iwm_config_boot_params(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Config boot parameters failed\n");
+		goto err_disable;
+	}
+
+	ret = iwm_read_mac(iwm, iwm_to_ndev(iwm)->dev_addr);
+	if (ret) {
+		IWM_ERR(iwm, "MAC reading failed\n");
+		goto err_disable;
+	}
+
+	/* We can load the FWs */
+	ret = iwm_load_fw(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "FW loading failed\n");
+		goto err_disable;
+	}
+
+	/* We configure the UMAC and enable the wifi module */
+	ret = iwm_send_umac_config(iwm,
+			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_CORE_EN) |
+			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_LINK_EN) |
+			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_MLME_EN));
+	if (ret) {
+		IWM_ERR(iwm, "UMAC config failed\n");
+		goto err_fw;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Didn't get a wifi core status notification\n");
+		goto err_fw;
+	}
+
+	if (iwm->core_enabled != (UMAC_NTFY_WIFI_CORE_STATUS_LINK_EN |
+				  UMAC_NTFY_WIFI_CORE_STATUS_MLME_EN)) {
+		IWM_DBG_BOOT(iwm, DBG, "Not all cores enabled:0x%x\n",
+			     iwm->core_enabled);
+		ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+		if (ret) {
+			IWM_ERR(iwm, "Didn't get a core status notification\n");
+			goto err_fw;
+		}
+
+		if (iwm->core_enabled != (UMAC_NTFY_WIFI_CORE_STATUS_LINK_EN |
+					  UMAC_NTFY_WIFI_CORE_STATUS_MLME_EN)) {
+			IWM_ERR(iwm, "Not all cores enabled: 0x%x\n",
+				iwm->core_enabled);
+			goto err_fw;
+		} else {
+			IWM_INFO(iwm, "All cores enabled\n");
+		}
+	}
+
+	iwm->umac_profile = kmalloc(sizeof(struct iwm_umac_profile),
+				    GFP_KERNEL);
+	if (!iwm->umac_profile) {
+		IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
+		goto err_fw;
+	}
+
+	iwm_init_default_profile(iwm, iwm->umac_profile);
+
+	ret = iwm_channels_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't init channels\n");
+		goto err_profile;
+	}
+
+	/* Set the READY bit to indicate interface is brought up successfully */
+	set_bit(IWM_STATUS_READY, &iwm->status);
+
+	return 0;
+
+ err_profile:
+	kfree(iwm->umac_profile);
+	iwm->umac_profile = NULL;
+
+ err_fw:
+	iwm_eeprom_exit(iwm);
+
+ err_disable:
+	ret = iwm_bus_disable(iwm);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't disable function\n");
+
+	return -EIO;
+}
+
+int iwm_down(struct iwm_priv *iwm)
+{
+	int ret;
+
+	/* The interface is already down */
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return 0;
+
+	if (iwm->scan_request) {
+		cfg80211_scan_done(iwm->scan_request, true);
+		iwm->scan_request = NULL;
+	}
+
+	clear_bit(IWM_STATUS_READY, &iwm->status);
+
+	iwm_eeprom_exit(iwm);
+	kfree(iwm->umac_profile);
+	iwm->umac_profile = NULL;
+	iwm_bss_list_clean(iwm);
+
+	iwm->default_key = NULL;
+	iwm->core_enabled = 0;
+
+	ret = iwm_bus_disable(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't disable function\n");
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
new file mode 100644
index 00000000000..68e2c3b6c7a
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -0,0 +1,162 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+/*
+ * This is the netdev related hooks for iwm.
+ *
+ * Some interesting code paths:
+ *
+ * iwm_open() (Called at netdev interface bringup time)
+ *  -> iwm_up() (main.c)
+ *      -> iwm_bus_enable()
+ *          -> if_sdio_enable() (In case of an SDIO bus)
+ *              -> sdio_enable_func()
+ *      -> iwm_notif_wait(BARKER_REBOOT) (wait for reboot barker)
+ *      -> iwm_notif_wait(ACK_BARKER) (wait for ACK barker)
+ *      -> iwm_load_fw() (fw.c)
+ *          -> iwm_load_umac()
+ *          -> iwm_load_lmac() (Calibration LMAC)
+ *          -> iwm_load_lmac() (Operational LMAC)
+ *      -> iwm_send_umac_config()
+ *
+ * iwm_stop() (Called at netdev interface bringdown time)
+ *  -> iwm_down()
+ *      -> iwm_bus_disable()
+ *          -> if_sdio_disable() (In case of an SDIO bus)
+ *              -> sdio_disable_func()
+ */
+#include <linux/netdevice.h>
+
+#include "iwm.h"
+#include "cfg80211.h"
+#include "debug.h"
+
+static int iwm_open(struct net_device *ndev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(ndev);
+	int ret = 0;
+
+	if (!test_bit(IWM_RADIO_RFKILL_SW, &iwm->radio))
+		ret = iwm_up(iwm);
+
+	return ret;
+}
+
+static int iwm_stop(struct net_device *ndev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(ndev);
+	int ret = 0;
+
+	if (!test_bit(IWM_RADIO_RFKILL_SW, &iwm->radio))
+		ret = iwm_down(iwm);
+
+	return ret;
+}
+
+/*
+ * iwm AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+
+static u16 iwm_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	skb->priority = cfg80211_classify8021d(skb);
+
+	return iwm_1d_to_queue[skb->priority];
+}
+
+static const struct net_device_ops iwm_netdev_ops = {
+	.ndo_open		= iwm_open,
+	.ndo_stop		= iwm_stop,
+	.ndo_start_xmit		= iwm_xmit_frame,
+	.ndo_select_queue	= iwm_select_queue,
+};
+
+void *iwm_if_alloc(int sizeof_bus, struct device *dev,
+		   struct iwm_if_ops *if_ops)
+{
+	struct net_device *ndev;
+	struct wireless_dev *wdev;
+	struct iwm_priv *iwm;
+	int ret = 0;
+
+	wdev = iwm_wdev_alloc(sizeof_bus, dev);
+	if (!wdev) {
+		dev_err(dev, "no memory for wireless device instance\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	iwm = wdev_to_iwm(wdev);
+	iwm->bus_ops = if_ops;
+	iwm->wdev = wdev;
+	iwm_priv_init(iwm);
+	wdev->iftype = iwm_mode_to_nl80211_iftype(iwm->conf.mode);
+
+	ndev = alloc_netdev_mq(0, "wlan%d", ether_setup,
+			       IWM_TX_QUEUES);
+	if (!ndev) {
+		dev_err(dev, "no memory for network device instance\n");
+		goto out_wdev;
+	}
+
+	ndev->netdev_ops = &iwm_netdev_ops;
+	ndev->wireless_handlers = &iwm_iw_handler_def;
+	ndev->ieee80211_ptr = wdev;
+	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
+	ret = register_netdev(ndev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register netdev: %d\n", ret);
+		goto out_ndev;
+	}
+
+	wdev->netdev = ndev;
+
+	return iwm;
+
+ out_ndev:
+	free_netdev(ndev);
+
+ out_wdev:
+	iwm_wdev_free(iwm);
+	return ERR_PTR(ret);
+}
+
+void iwm_if_free(struct iwm_priv *iwm)
+{
+	int i;
+
+	if (!iwm_to_ndev(iwm))
+		return;
+
+	unregister_netdev(iwm_to_ndev(iwm));
+	free_netdev(iwm_to_ndev(iwm));
+	iwm_wdev_free(iwm);
+	destroy_workqueue(iwm->rx_wq);
+	for (i = 0; i < IWM_TX_QUEUES; i++)
+		destroy_workqueue(iwm->txq[i].wq);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
new file mode 100644
index 00000000000..d73cf96c6dc
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -0,0 +1,1431 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <linux/if_arp.h>
+#include <linux/list.h>
+#include <net/iw_handler.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "hal.h"
+#include "umac.h"
+#include "lmac.h"
+#include "commands.h"
+#include "rx.h"
+#include "cfg80211.h"
+#include "eeprom.h"
+
+static int iwm_rx_check_udma_hdr(struct iwm_udma_in_hdr *hdr)
+{
+	if ((le32_to_cpu(hdr->cmd) == UMAC_PAD_TERMINAL) ||
+	    (le32_to_cpu(hdr->size) == UMAC_PAD_TERMINAL))
+		return -EINVAL;
+
+	return 0;
+}
+
+static inline int iwm_rx_resp_size(struct iwm_udma_in_hdr *hdr)
+{
+	return ALIGN(le32_to_cpu(hdr->size) + sizeof(struct iwm_udma_in_hdr),
+		     16);
+}
+
+/*
+ * Notification handlers:
+ *
+ * For every possible notification we can receive from the
+ * target, we have a handler.
+ * When we get a target notification, and there is no one
+ * waiting for it, it's just processed through the rx code
+ * path:
+ *
+ * iwm_rx_handle()
+ *  -> iwm_rx_handle_umac()
+ *      -> iwm_rx_handle_wifi()
+ *          -> iwm_rx_handle_resp()
+ *              -> iwm_ntf_*()
+ *
+ *      OR
+ *
+ *      -> iwm_rx_handle_non_wifi()
+ *
+ * If there are processes waiting for this notification, then
+ * iwm_rx_handle_wifi() just wakes those processes up and they
+ * grab the pending notification.
+ */
+static int iwm_ntf_error(struct iwm_priv *iwm, u8 *buf,
+			 unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_error *error;
+	struct iwm_fw_error_hdr *fw_err;
+
+	error = (struct iwm_umac_notif_error *)buf;
+	fw_err = &error->err;
+
+
+	IWM_ERR(iwm, "%cMAC FW ERROR:\n",
+	 (le32_to_cpu(fw_err->category) == UMAC_SYS_ERR_CAT_LMAC) ? 'L' : 'U');
+	IWM_ERR(iwm, "\tCategory:    %d\n", le32_to_cpu(fw_err->category));
+	IWM_ERR(iwm, "\tStatus:      0x%x\n", le32_to_cpu(fw_err->status));
+	IWM_ERR(iwm, "\tPC:          0x%x\n", le32_to_cpu(fw_err->pc));
+	IWM_ERR(iwm, "\tblink1:      %d\n", le32_to_cpu(fw_err->blink1));
+	IWM_ERR(iwm, "\tblink2:      %d\n", le32_to_cpu(fw_err->blink2));
+	IWM_ERR(iwm, "\tilink1:      %d\n", le32_to_cpu(fw_err->ilink1));
+	IWM_ERR(iwm, "\tilink2:      %d\n", le32_to_cpu(fw_err->ilink2));
+	IWM_ERR(iwm, "\tData1:       0x%x\n", le32_to_cpu(fw_err->data1));
+	IWM_ERR(iwm, "\tData2:       0x%x\n", le32_to_cpu(fw_err->data2));
+	IWM_ERR(iwm, "\tLine number: %d\n", le32_to_cpu(fw_err->line_num));
+	IWM_ERR(iwm, "\tUMAC status: 0x%x\n", le32_to_cpu(fw_err->umac_status));
+	IWM_ERR(iwm, "\tLMAC status: 0x%x\n", le32_to_cpu(fw_err->lmac_status));
+	IWM_ERR(iwm, "\tSDIO status: 0x%x\n", le32_to_cpu(fw_err->sdio_status));
+
+	return 0;
+}
+
+static int iwm_ntf_umac_alive(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_alive *alive_resp =
+			(struct iwm_umac_notif_alive *)(buf);
+	u16 status = le16_to_cpu(alive_resp->status);
+
+	if (status == UMAC_NTFY_ALIVE_STATUS_ERR) {
+		IWM_ERR(iwm, "Receive error UMAC_ALIVE\n");
+		return -EIO;
+	}
+
+	iwm_tx_credit_init_pools(iwm, alive_resp);
+
+	return 0;
+}
+
+static int iwm_ntf_init_complete(struct iwm_priv *iwm, u8 *buf,
+				 unsigned long buf_size,
+				 struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_init_complete *init_complete =
+			(struct iwm_umac_notif_init_complete *)(buf);
+	u16 status = le16_to_cpu(init_complete->status);
+
+	if (status == UMAC_NTFY_INIT_COMPLETE_STATUS_ERR) {
+		IWM_DBG_NTF(iwm, DBG, "Hardware rf kill is on (radio off)\n");
+		set_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+	} else {
+		IWM_DBG_NTF(iwm, DBG, "Hardware rf kill is off (radio on)\n");
+		clear_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_tx_credit_update(struct iwm_priv *iwm, u8 *buf,
+				    unsigned long buf_size,
+				    struct iwm_wifi_cmd *cmd)
+{
+	int pool_nr, total_freed_pages;
+	unsigned long pool_map;
+	int i, id;
+	struct iwm_umac_notif_page_dealloc *dealloc =
+			(struct iwm_umac_notif_page_dealloc *)buf;
+
+	pool_nr = GET_VAL32(dealloc->changes, UMAC_DEALLOC_NTFY_CHANGES_CNT);
+	pool_map = GET_VAL32(dealloc->changes, UMAC_DEALLOC_NTFY_CHANGES_MSK);
+
+	IWM_DBG_TX(iwm, DBG, "UMAC dealloc notification: pool nr %d, "
+		   "update map 0x%lx\n", pool_nr, pool_map);
+
+	spin_lock(&iwm->tx_credit.lock);
+
+	for (i = 0; i < pool_nr; i++) {
+		id = GET_VAL32(dealloc->grp_info[i],
+			       UMAC_DEALLOC_NTFY_GROUP_NUM);
+		if (test_bit(id, &pool_map)) {
+			total_freed_pages = GET_VAL32(dealloc->grp_info[i],
+					      UMAC_DEALLOC_NTFY_PAGE_CNT);
+			iwm_tx_credit_inc(iwm, id, total_freed_pages);
+		}
+	}
+
+	spin_unlock(&iwm->tx_credit.lock);
+
+	return 0;
+}
+
+static int iwm_ntf_umac_reset(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	IWM_DBG_NTF(iwm, DBG, "UMAC RESET done\n");
+
+	return 0;
+}
+
+static int iwm_ntf_lmac_version(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	IWM_DBG_NTF(iwm, INFO, "LMAC Version: %x.%x\n", buf[9], buf[8]);
+
+	return 0;
+}
+
+static int iwm_ntf_tx(struct iwm_priv *iwm, u8 *buf,
+		      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_lmac_tx_resp *tx_resp;
+	struct iwm_umac_wifi_in_hdr *hdr;
+
+	tx_resp = (struct iwm_lmac_tx_resp *)
+		(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+
+	IWM_DBG_NTF(iwm, DBG, "REPLY_TX, buf size: %lu\n", buf_size);
+
+	IWM_DBG_NTF(iwm, DBG, "Seqnum: %d\n",
+		    le16_to_cpu(hdr->sw_hdr.cmd.seq_num));
+	IWM_DBG_NTF(iwm, DBG, "\tFrame cnt: %d\n", tx_resp->frame_cnt);
+	IWM_DBG_NTF(iwm, DBG, "\tRetry cnt: %d\n",
+		    le16_to_cpu(tx_resp->retry_cnt));
+	IWM_DBG_NTF(iwm, DBG, "\tSeq ctl: %d\n", le16_to_cpu(tx_resp->seq_ctl));
+	IWM_DBG_NTF(iwm, DBG, "\tByte cnt: %d\n",
+		    le16_to_cpu(tx_resp->byte_cnt));
+	IWM_DBG_NTF(iwm, DBG, "\tStatus: 0x%x\n", le32_to_cpu(tx_resp->status));
+
+	return 0;
+}
+
+
+static int iwm_ntf_calib_res(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	u8 opcode;
+	u8 *calib_buf;
+	struct iwm_lmac_calib_hdr *hdr = (struct iwm_lmac_calib_hdr *)
+				(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+
+	opcode = hdr->opcode;
+
+	BUG_ON(opcode >= CALIBRATION_CMD_NUM ||
+	       opcode < PHY_CALIBRATE_OPCODES_NUM);
+
+	IWM_DBG_NTF(iwm, DBG, "Store calibration result for opcode: %d\n",
+		    opcode);
+
+	buf_size -= sizeof(struct iwm_umac_wifi_in_hdr);
+	calib_buf = iwm->calib_res[opcode].buf;
+
+	if (!calib_buf || (iwm->calib_res[opcode].size < buf_size)) {
+		kfree(calib_buf);
+		calib_buf = kzalloc(buf_size, GFP_KERNEL);
+		if (!calib_buf) {
+			IWM_ERR(iwm, "Memory allocation failed: calib_res\n");
+			return -ENOMEM;
+		}
+		iwm->calib_res[opcode].buf = calib_buf;
+		iwm->calib_res[opcode].size = buf_size;
+	}
+
+	memcpy(calib_buf, hdr, buf_size);
+	set_bit(opcode - PHY_CALIBRATE_OPCODES_NUM, &iwm->calib_done_map);
+
+	return 0;
+}
+
+static int iwm_ntf_calib_complete(struct iwm_priv *iwm, u8 *buf,
+				  unsigned long buf_size,
+				  struct iwm_wifi_cmd *cmd)
+{
+	IWM_DBG_NTF(iwm, DBG, "Calibration completed\n");
+
+	return 0;
+}
+
+static int iwm_ntf_calib_cfg(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_lmac_cal_cfg_resp *cal_resp;
+
+	cal_resp = (struct iwm_lmac_cal_cfg_resp *)
+			(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+
+	IWM_DBG_NTF(iwm, DBG, "Calibration CFG command status: %d\n",
+		    le32_to_cpu(cal_resp->status));
+
+	return 0;
+}
+
+static int iwm_ntf_wifi_status(struct iwm_priv *iwm, u8 *buf,
+			       unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_wifi_status *status =
+		(struct iwm_umac_notif_wifi_status *)buf;
+
+	iwm->core_enabled |= le16_to_cpu(status->status);
+
+	return 0;
+}
+
+static struct iwm_rx_ticket_node *
+iwm_rx_ticket_node_alloc(struct iwm_priv *iwm, struct iwm_rx_ticket *ticket)
+{
+	struct iwm_rx_ticket_node *ticket_node;
+
+	ticket_node = kzalloc(sizeof(struct iwm_rx_ticket_node), GFP_KERNEL);
+	if (!ticket_node) {
+		IWM_ERR(iwm, "Couldn't allocate ticket node\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ticket_node->ticket = kzalloc(sizeof(struct iwm_rx_ticket), GFP_KERNEL);
+	if (!ticket_node->ticket) {
+		IWM_ERR(iwm, "Couldn't allocate RX ticket\n");
+		kfree(ticket_node);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	memcpy(ticket_node->ticket, ticket, sizeof(struct iwm_rx_ticket));
+	INIT_LIST_HEAD(&ticket_node->node);
+
+	return ticket_node;
+}
+
+static void iwm_rx_ticket_node_free(struct iwm_rx_ticket_node *ticket_node)
+{
+	kfree(ticket_node->ticket);
+	kfree(ticket_node);
+}
+
+static struct iwm_rx_packet *iwm_rx_packet_get(struct iwm_priv *iwm, u16 id)
+{
+	u8 id_hash = IWM_RX_ID_GET_HASH(id);
+	struct list_head *packet_list;
+	struct iwm_rx_packet *packet, *next;
+
+	packet_list = &iwm->rx_packets[id_hash];
+
+	list_for_each_entry_safe(packet, next, packet_list, node)
+		if (packet->id == id)
+			return packet;
+
+	return NULL;
+}
+
+static struct iwm_rx_packet *iwm_rx_packet_alloc(struct iwm_priv *iwm, u8 *buf,
+						 u32 size, u16 id)
+{
+	struct iwm_rx_packet *packet;
+
+	packet = kzalloc(sizeof(struct iwm_rx_packet), GFP_KERNEL);
+	if (!packet) {
+		IWM_ERR(iwm, "Couldn't allocate packet\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	packet->skb = dev_alloc_skb(size);
+	if (!packet->skb) {
+		IWM_ERR(iwm, "Couldn't allocate packet SKB\n");
+		kfree(packet);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	packet->pkt_size = size;
+
+	skb_put(packet->skb, size);
+	memcpy(packet->skb->data, buf, size);
+	INIT_LIST_HEAD(&packet->node);
+	packet->id = id;
+
+	return packet;
+}
+
+void iwm_rx_free(struct iwm_priv *iwm)
+{
+	struct iwm_rx_ticket_node *ticket, *nt;
+	struct iwm_rx_packet *packet, *np;
+	int i;
+
+	list_for_each_entry_safe(ticket, nt, &iwm->rx_tickets, node) {
+		list_del(&ticket->node);
+		iwm_rx_ticket_node_free(ticket);
+	}
+
+	for (i = 0; i < IWM_RX_ID_HASH; i++) {
+		list_for_each_entry_safe(packet, np, &iwm->rx_packets[i],
+					 node) {
+			list_del(&packet->node);
+			kfree_skb(packet->skb);
+			kfree(packet);
+		}
+	}
+}
+
+static int iwm_ntf_rx_ticket(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_rx_ticket *ntf_rx_ticket =
+		(struct iwm_umac_notif_rx_ticket *)buf;
+	struct iwm_rx_ticket *ticket =
+		(struct iwm_rx_ticket *)ntf_rx_ticket->tickets;
+	int i, schedule_rx = 0;
+
+	for (i = 0; i < ntf_rx_ticket->num_tickets; i++) {
+		struct iwm_rx_ticket_node *ticket_node;
+
+		switch (le16_to_cpu(ticket->action)) {
+		case IWM_RX_TICKET_RELEASE:
+		case IWM_RX_TICKET_DROP:
+			/* We can push the packet to the stack */
+			ticket_node = iwm_rx_ticket_node_alloc(iwm, ticket);
+			if (IS_ERR(ticket_node))
+				return PTR_ERR(ticket_node);
+
+			IWM_DBG_NTF(iwm, DBG, "TICKET RELEASE(%d)\n",
+				    ticket->id);
+			list_add_tail(&ticket_node->node, &iwm->rx_tickets);
+
+			/*
+			 * We received an Rx ticket, most likely there's
+			 * a packet pending for it, it's not worth going
+			 * through the packet hash list to double check.
+			 * Let's just fire the rx worker..
+			 */
+			schedule_rx = 1;
+
+			break;
+
+		default:
+			IWM_ERR(iwm, "Invalid RX ticket action: 0x%x\n",
+				ticket->action);
+		}
+
+		ticket++;
+	}
+
+	if (schedule_rx)
+		queue_work(iwm->rx_wq, &iwm->rx_worker);
+
+	return 0;
+}
+
+static int iwm_ntf_rx_packet(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_wifi_in_hdr *wifi_hdr;
+	struct iwm_rx_packet *packet;
+	u16 id, buf_offset;
+	u32 packet_size;
+
+	IWM_DBG_NTF(iwm, DBG, "\n");
+
+	wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+	id = le16_to_cpu(wifi_hdr->sw_hdr.cmd.seq_num);
+	buf_offset = sizeof(struct iwm_umac_wifi_in_hdr);
+	packet_size = buf_size - sizeof(struct iwm_umac_wifi_in_hdr);
+
+	IWM_DBG_NTF(iwm, DBG, "CMD:0x%x, seqnum: %d, packet size: %d\n",
+		    wifi_hdr->sw_hdr.cmd.cmd, id, packet_size);
+	IWM_DBG_RX(iwm, DBG, "Packet id: %d\n", id);
+	IWM_HEXDUMP(iwm, DBG, RX, "PACKET: ", buf + buf_offset, packet_size);
+
+	packet = iwm_rx_packet_alloc(iwm, buf + buf_offset, packet_size, id);
+	if (IS_ERR(packet))
+		return PTR_ERR(packet);
+
+	list_add_tail(&packet->node, &iwm->rx_packets[IWM_RX_ID_GET_HASH(id)]);
+
+	/* We might (unlikely) have received the packet _after_ the ticket */
+	queue_work(iwm->rx_wq, &iwm->rx_worker);
+
+	return 0;
+}
+
+/* MLME handlers */
+static int iwm_mlme_assoc_start(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_assoc_start *start;
+
+	start = (struct iwm_umac_notif_assoc_start *)buf;
+
+	set_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+
+	IWM_DBG_MLME(iwm, INFO, "Association with %pM Started, reason: %d\n",
+		     start->bssid, le32_to_cpu(start->roam_reason));
+
+	wake_up_interruptible(&iwm->mlme_queue);
+
+	return 0;
+}
+
+static int iwm_mlme_assoc_complete(struct iwm_priv *iwm, u8 *buf,
+				   unsigned long buf_size,
+				   struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_assoc_complete *complete =
+		(struct iwm_umac_notif_assoc_complete *)buf;
+	union iwreq_data wrqu;
+
+	IWM_DBG_MLME(iwm, INFO, "Association with %pM completed, status: %d\n",
+		     complete->bssid, complete->status);
+
+	memset(&wrqu, 0, sizeof(wrqu));
+
+	clear_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+
+	switch (le32_to_cpu(complete->status)) {
+	case UMAC_ASSOC_COMPLETE_SUCCESS:
+		set_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+		memcpy(iwm->bssid, complete->bssid, ETH_ALEN);
+		iwm->channel = complete->channel;
+
+		iwm_link_on(iwm);
+
+		memcpy(wrqu.ap_addr.sa_data, complete->bssid, ETH_ALEN);
+		break;
+	case UMAC_ASSOC_COMPLETE_FAILURE:
+		clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+		memset(iwm->bssid, 0, ETH_ALEN);
+		iwm->channel = 0;
+
+		iwm_link_off(iwm);
+	default:
+		break;
+	}
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS) {
+		cfg80211_ibss_joined(iwm_to_ndev(iwm), iwm->bssid, GFP_KERNEL);
+		return 0;
+	}
+
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(iwm_to_ndev(iwm), SIOCGIWAP, &wrqu, NULL);
+
+	return 0;
+}
+
+static int iwm_mlme_profile_invalidate(struct iwm_priv *iwm, u8 *buf,
+				       unsigned long buf_size,
+				       struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_profile_invalidate *invalid;
+
+	invalid = (struct iwm_umac_notif_profile_invalidate *)buf;
+
+	IWM_DBG_MLME(iwm, INFO, "Profile Invalidated. Reason: %d\n",
+		     le32_to_cpu(invalid->reason));
+
+	clear_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+	clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+
+	iwm->umac_profile_active = 0;
+	memset(iwm->bssid, 0, ETH_ALEN);
+	iwm->channel = 0;
+
+	iwm_link_off(iwm);
+
+	wake_up_interruptible(&iwm->mlme_queue);
+
+	return 0;
+}
+
+static int iwm_mlme_scan_complete(struct iwm_priv *iwm, u8 *buf,
+				  unsigned long buf_size,
+				  struct iwm_wifi_cmd *cmd)
+{
+	int ret;
+	struct iwm_umac_notif_scan_complete *scan_complete =
+		(struct iwm_umac_notif_scan_complete *)buf;
+	u32 result = le32_to_cpu(scan_complete->result);
+
+	IWM_DBG_MLME(iwm, INFO, "type:0x%x result:0x%x seq:%d\n",
+		     le32_to_cpu(scan_complete->type),
+		     le32_to_cpu(scan_complete->result),
+		     scan_complete->seq_num);
+
+	if (!test_and_clear_bit(IWM_STATUS_SCANNING, &iwm->status)) {
+		IWM_ERR(iwm, "Scan complete while device not scanning\n");
+		return -EIO;
+	}
+	if (!iwm->scan_request)
+		return 0;
+
+	ret = iwm_cfg80211_inform_bss(iwm);
+
+	cfg80211_scan_done(iwm->scan_request,
+			   (result & UMAC_SCAN_RESULT_ABORTED) ? 1 : !!ret);
+	iwm->scan_request = NULL;
+
+	return ret;
+}
+
+static int iwm_mlme_update_sta_table(struct iwm_priv *iwm, u8 *buf,
+				     unsigned long buf_size,
+				     struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_sta_info *umac_sta =
+			(struct iwm_umac_notif_sta_info *)buf;
+	struct iwm_sta_info *sta;
+	int i;
+
+	switch (le32_to_cpu(umac_sta->opcode)) {
+	case UMAC_OPCODE_ADD_MODIFY:
+		sta = &iwm->sta_table[GET_VAL8(umac_sta->sta_id, LMAC_STA_ID)];
+
+		IWM_DBG_MLME(iwm, INFO, "%s STA: ID = %d, Color = %d, "
+			     "addr = %pM, qos = %d\n",
+			     sta->valid ? "Modify" : "Add",
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_ID),
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_COLOR),
+			     umac_sta->mac_addr,
+			     umac_sta->flags & UMAC_STA_FLAG_QOS);
+
+		sta->valid = 1;
+		sta->qos = umac_sta->flags & UMAC_STA_FLAG_QOS;
+		sta->color = GET_VAL8(umac_sta->sta_id, LMAC_STA_COLOR);
+		memcpy(sta->addr, umac_sta->mac_addr, ETH_ALEN);
+		break;
+	case UMAC_OPCODE_REMOVE:
+		IWM_DBG_MLME(iwm, INFO, "Remove STA: ID = %d, Color = %d, "
+			     "addr = %pM\n",
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_ID),
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_COLOR),
+			     umac_sta->mac_addr);
+
+		sta = &iwm->sta_table[GET_VAL8(umac_sta->sta_id, LMAC_STA_ID)];
+
+		if (!memcmp(sta->addr, umac_sta->mac_addr, ETH_ALEN))
+			sta->valid = 0;
+
+		break;
+	case UMAC_OPCODE_CLEAR_ALL:
+		for (i = 0; i < IWM_STA_TABLE_NUM; i++)
+			iwm->sta_table[i].valid = 0;
+
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf,
+				     unsigned long buf_size,
+				     struct iwm_wifi_cmd *cmd)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct ieee80211_mgmt *mgmt;
+	struct iwm_umac_notif_bss_info *umac_bss =
+			(struct iwm_umac_notif_bss_info *)buf;
+	struct ieee80211_channel *channel;
+	struct ieee80211_supported_band *band;
+	struct iwm_bss_info *bss, *next;
+	s32 signal;
+	int freq;
+	u16 frame_len = le16_to_cpu(umac_bss->frame_len);
+	size_t bss_len = sizeof(struct iwm_umac_notif_bss_info) + frame_len;
+
+	mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf);
+
+	IWM_DBG_MLME(iwm, DBG, "New BSS info entry: %pM\n", mgmt->bssid);
+	IWM_DBG_MLME(iwm, DBG, "\tType: 0x%x\n", le32_to_cpu(umac_bss->type));
+	IWM_DBG_MLME(iwm, DBG, "\tTimestamp: %d\n",
+		     le32_to_cpu(umac_bss->timestamp));
+	IWM_DBG_MLME(iwm, DBG, "\tTable Index: %d\n",
+		     le16_to_cpu(umac_bss->table_idx));
+	IWM_DBG_MLME(iwm, DBG, "\tBand: %d\n", umac_bss->band);
+	IWM_DBG_MLME(iwm, DBG, "\tChannel: %d\n", umac_bss->channel);
+	IWM_DBG_MLME(iwm, DBG, "\tRSSI: %d\n", umac_bss->rssi);
+	IWM_DBG_MLME(iwm, DBG, "\tFrame Length: %d\n", frame_len);
+
+	list_for_each_entry_safe(bss, next, &iwm->bss_list, node)
+		if (bss->bss->table_idx == umac_bss->table_idx)
+			break;
+
+	if (&bss->node != &iwm->bss_list) {
+		/* Remove the old BSS entry, we will add it back later. */
+		list_del(&bss->node);
+		kfree(bss->bss);
+	} else {
+		/* New BSS entry */
+
+		bss = kzalloc(sizeof(struct iwm_bss_info), GFP_KERNEL);
+		if (!bss) {
+			IWM_ERR(iwm, "Couldn't allocate bss_info\n");
+			return -ENOMEM;
+		}
+	}
+
+	bss->bss = kzalloc(bss_len, GFP_KERNEL);
+	if (!bss) {
+		kfree(bss);
+		IWM_ERR(iwm, "Couldn't allocate bss\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&bss->node);
+	memcpy(bss->bss, umac_bss, bss_len);
+
+	if (umac_bss->band == UMAC_BAND_2GHZ)
+		band = wiphy->bands[IEEE80211_BAND_2GHZ];
+	else if (umac_bss->band == UMAC_BAND_5GHZ)
+		band = wiphy->bands[IEEE80211_BAND_5GHZ];
+	else {
+		IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band);
+		goto err;
+	}
+
+	freq = ieee80211_channel_to_frequency(umac_bss->channel);
+	channel = ieee80211_get_channel(wiphy, freq);
+	signal = umac_bss->rssi * 100;
+
+	bss->cfg_bss = cfg80211_inform_bss_frame(wiphy, channel,
+						 mgmt, frame_len,
+						 signal, GFP_KERNEL);
+	if (!bss->cfg_bss)
+		goto err;
+
+	list_add_tail(&bss->node, &iwm->bss_list);
+
+	return 0;
+ err:
+	kfree(bss->bss);
+	kfree(bss);
+
+	return -EINVAL;
+}
+
+static int iwm_mlme_remove_bss(struct iwm_priv *iwm, u8 *buf,
+			       unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_bss_removed *bss_rm =
+		(struct iwm_umac_notif_bss_removed *)buf;
+	struct iwm_bss_info *bss, *next;
+	u16 table_idx;
+	int i;
+
+	for (i = 0; i < le32_to_cpu(bss_rm->count); i++) {
+		table_idx = (le16_to_cpu(bss_rm->entries[i])
+			     & IWM_BSS_REMOVE_INDEX_MSK);
+		list_for_each_entry_safe(bss, next, &iwm->bss_list, node)
+			if (bss->bss->table_idx == cpu_to_le16(table_idx)) {
+				struct ieee80211_mgmt *mgmt;
+
+				mgmt = (struct ieee80211_mgmt *)
+					(bss->bss->frame_buf);
+				IWM_DBG_MLME(iwm, ERR,
+					     "BSS removed: %pM\n",
+					     mgmt->bssid);
+				list_del(&bss->node);
+				kfree(bss->bss);
+				kfree(bss);
+			}
+	}
+
+	return 0;
+}
+
+static int iwm_mlme_mgt_frame(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_mgt_frame *mgt_frame =
+	(struct iwm_umac_notif_mgt_frame *)buf;
+	struct ieee80211_mgmt *mgt = (struct ieee80211_mgmt *)mgt_frame->frame;
+	u8 *ie;
+	unsigned int event;
+	union iwreq_data wrqu;
+
+	IWM_HEXDUMP(iwm, DBG, MLME, "MGT: ", mgt_frame->frame,
+		    le16_to_cpu(mgt_frame->len));
+
+	if (ieee80211_is_assoc_req(mgt->frame_control)) {
+		ie = mgt->u.assoc_req.variable;;
+		event = IWEVASSOCREQIE;
+	} else if (ieee80211_is_reassoc_req(mgt->frame_control)) {
+		ie = mgt->u.reassoc_req.variable;;
+		event = IWEVASSOCREQIE;
+	} else if (ieee80211_is_assoc_resp(mgt->frame_control)) {
+		ie = mgt->u.assoc_resp.variable;;
+		event = IWEVASSOCRESPIE;
+	} else if (ieee80211_is_reassoc_resp(mgt->frame_control)) {
+		ie = mgt->u.reassoc_resp.variable;;
+		event = IWEVASSOCRESPIE;
+	} else {
+		IWM_ERR(iwm, "Unsupported management frame");
+		return 0;
+	}
+
+	wrqu.data.length = le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+
+	IWM_HEXDUMP(iwm, DBG, MLME, "EVT: ", ie, wrqu.data.length);
+	wireless_send_event(iwm_to_ndev(iwm), event, &wrqu, ie);
+
+	return 0;
+}
+
+static int iwm_ntf_mlme(struct iwm_priv *iwm, u8 *buf,
+			unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_wifi_if *notif =
+		(struct iwm_umac_notif_wifi_if *)buf;
+
+	switch (notif->status) {
+	case WIFI_IF_NTFY_ASSOC_START:
+		return iwm_mlme_assoc_start(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_ASSOC_COMPLETE:
+		return iwm_mlme_assoc_complete(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_PROFILE_INVALIDATE_COMPLETE:
+		return iwm_mlme_profile_invalidate(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_CONNECTION_TERMINATED:
+		IWM_DBG_MLME(iwm, DBG, "Connection terminated\n");
+		break;
+	case WIFI_IF_NTFY_SCAN_COMPLETE:
+		return iwm_mlme_scan_complete(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_STA_TABLE_CHANGE:
+		return iwm_mlme_update_sta_table(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_EXTENDED_IE_REQUIRED:
+		IWM_DBG_MLME(iwm, DBG, "Extended IE required\n");
+		break;
+	case WIFI_IF_NTFY_BSS_TRK_TABLE_CHANGED:
+		return iwm_mlme_update_bss_table(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_BSS_TRK_ENTRIES_REMOVED:
+		return iwm_mlme_remove_bss(iwm, buf, buf_size, cmd);
+		break;
+	case WIFI_IF_NTFY_MGMT_FRAME:
+		return iwm_mlme_mgt_frame(iwm, buf, buf_size, cmd);
+	case WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_START:
+	case WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_COMPLETE:
+	case WIFI_DBG_IF_NTFY_SCAN_CHANNEL_START:
+	case WIFI_DBG_IF_NTFY_SCAN_CHANNEL_RESULT:
+	case WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_START:
+	case WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_COMPLETE:
+	case WIFI_DBG_IF_NTFY_CNCT_ATC_START:
+	case WIFI_DBG_IF_NTFY_COEX_NOTIFICATION:
+	case WIFI_DBG_IF_NTFY_COEX_HANDLE_ENVELOP:
+	case WIFI_DBG_IF_NTFY_COEX_HANDLE_RELEASE_ENVELOP:
+		IWM_DBG_MLME(iwm, DBG, "MLME debug notification: 0x%x\n",
+			     notif->status);
+		break;
+	default:
+		IWM_ERR(iwm, "Unhandled notification: 0x%x\n", notif->status);
+		break;
+	}
+
+	return 0;
+}
+
+#define IWM_STATS_UPDATE_INTERVAL		(2 * HZ)
+
+static int iwm_ntf_statistics(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_stats *stats = (struct iwm_umac_notif_stats *)buf;
+	struct iw_statistics *wstats = &iwm->wstats;
+	u16 max_rate = 0;
+	int i;
+
+	IWM_DBG_MLME(iwm, DBG, "Statistics notification received\n");
+
+	if (test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+		for (i = 0; i < UMAC_NTF_RATE_SAMPLE_NR; i++) {
+			max_rate = max_t(u16, max_rate,
+					 max(le16_to_cpu(stats->tx_rate[i]),
+					     le16_to_cpu(stats->rx_rate[i])));
+		}
+		/* UMAC passes rate info multiplies by 2 */
+		iwm->rate = max_rate >> 1;
+	}
+
+	wstats->status = 0;
+
+	wstats->discard.nwid = le32_to_cpu(stats->rx_drop_other_bssid);
+	wstats->discard.code = le32_to_cpu(stats->rx_drop_decode);
+	wstats->discard.fragment = le32_to_cpu(stats->rx_drop_reassembly);
+	wstats->discard.retries = le32_to_cpu(stats->tx_drop_max_retry);
+
+	wstats->miss.beacon = le32_to_cpu(stats->missed_beacons);
+
+	/* according to cfg80211 */
+	if (stats->rssi_dbm < -110)
+		wstats->qual.qual = 0;
+	else if (stats->rssi_dbm > -40)
+		wstats->qual.qual = 70;
+	else
+		wstats->qual.qual = stats->rssi_dbm + 110;
+
+	wstats->qual.level = stats->rssi_dbm;
+	wstats->qual.noise = stats->noise_dbm;
+	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
+
+	schedule_delayed_work(&iwm->stats_request, IWM_STATS_UPDATE_INTERVAL);
+
+	mod_timer(&iwm->watchdog, round_jiffies(jiffies + IWM_WATCHDOG_PERIOD));
+
+	return 0;
+}
+
+static int iwm_ntf_eeprom_proxy(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_cmd_eeprom_proxy *eeprom_proxy =
+		(struct iwm_umac_cmd_eeprom_proxy *)
+		(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	struct iwm_umac_cmd_eeprom_proxy_hdr *hdr = &eeprom_proxy->hdr;
+	u32 hdr_offset = le32_to_cpu(hdr->offset);
+	u32 hdr_len = le32_to_cpu(hdr->len);
+	u32 hdr_type = le32_to_cpu(hdr->type);
+
+	IWM_DBG_NTF(iwm, DBG, "type: 0x%x, len: %d, offset: 0x%x\n",
+		    hdr_type, hdr_len, hdr_offset);
+
+	if ((hdr_offset + hdr_len) > IWM_EEPROM_LEN)
+		return -EINVAL;
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (hdr_offset == IWM_EEPROM_SKU_CAP_OFF) {
+		if (eeprom_proxy->buf[0] == 0xff)
+			iwm->conf.hw_b0 = 1;
+	}
+#endif
+
+	switch (hdr_type) {
+	case IWM_UMAC_CMD_EEPROM_TYPE_READ:
+		memcpy(iwm->eeprom + hdr_offset, eeprom_proxy->buf, hdr_len);
+		break;
+	case IWM_UMAC_CMD_EEPROM_TYPE_WRITE:
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_channel_info_list(struct iwm_priv *iwm, u8 *buf,
+				     unsigned long buf_size,
+				     struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_cmd_get_channel_list *ch_list =
+			(struct iwm_umac_cmd_get_channel_list *)
+			(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct ieee80211_supported_band *band;
+	int i;
+
+	band = wiphy->bands[IEEE80211_BAND_2GHZ];
+
+	for (i = 0; i < band->n_channels; i++) {
+		unsigned long ch_mask_0 =
+			le32_to_cpu(ch_list->ch[0].channels_mask);
+		unsigned long ch_mask_2 =
+			le32_to_cpu(ch_list->ch[2].channels_mask);
+
+		if (!test_bit(i, &ch_mask_0))
+			band->channels[i].flags |= IEEE80211_CHAN_DISABLED;
+
+		if (!test_bit(i, &ch_mask_2))
+			band->channels[i].flags |= IEEE80211_CHAN_NO_IBSS;
+	}
+
+	band = wiphy->bands[IEEE80211_BAND_5GHZ];
+
+	for (i = 0; i < min(band->n_channels, 32); i++) {
+		unsigned long ch_mask_1 =
+			le32_to_cpu(ch_list->ch[1].channels_mask);
+		unsigned long ch_mask_3 =
+			le32_to_cpu(ch_list->ch[3].channels_mask);
+
+		if (!test_bit(i, &ch_mask_1))
+			band->channels[i].flags |= IEEE80211_CHAN_DISABLED;
+
+		if (!test_bit(i, &ch_mask_3))
+			band->channels[i].flags |= IEEE80211_CHAN_NO_IBSS;
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_wifi_if_wrapper(struct iwm_priv *iwm, u8 *buf,
+				   unsigned long buf_size,
+				   struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_wifi_if *hdr =
+			(struct iwm_umac_wifi_if *)cmd->buf.payload;
+
+	IWM_DBG_NTF(iwm, DBG, "WIFI_IF_WRAPPER cmd is delivered to UMAC: "
+		    "oid is %d\n", hdr->oid);
+
+	switch (hdr->oid) {
+	case UMAC_WIFI_IF_CMD_SET_PROFILE:
+		iwm->umac_profile_active = 1;
+		wake_up_interruptible(&iwm->mlme_queue);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_card_state(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_lmac_card_state *state = (struct iwm_lmac_card_state *)
+				(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	u32 flags = le32_to_cpu(state->flags);
+
+	IWM_INFO(iwm, "HW RF Kill %s, CT Kill %s\n",
+		 flags & IWM_CARD_STATE_HW_DISABLED ? "ON" : "OFF",
+		 flags & IWM_CARD_STATE_CTKILL_DISABLED ? "ON" : "OFF");
+
+	if (flags & IWM_CARD_STATE_HW_DISABLED)
+		set_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+	else
+		clear_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+
+	return 0;
+}
+
+static int iwm_rx_handle_wifi(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size)
+{
+	struct iwm_umac_wifi_in_hdr *wifi_hdr;
+	struct iwm_wifi_cmd *cmd;
+	u8 source, cmd_id;
+	u16 seq_num;
+	u32 count;
+	u8 resp;
+
+	wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+	cmd_id = wifi_hdr->sw_hdr.cmd.cmd;
+
+	source = GET_VAL32(wifi_hdr->hw_hdr.cmd, UMAC_HDI_IN_CMD_SOURCE);
+	if (source >= IWM_SRC_NUM) {
+		IWM_CRIT(iwm, "invalid source %d\n", source);
+		return -EINVAL;
+	}
+
+	count = (GET_VAL32(wifi_hdr->sw_hdr.meta_data, UMAC_FW_CMD_BYTE_COUNT));
+	count += sizeof(struct iwm_umac_wifi_in_hdr) -
+		 sizeof(struct iwm_dev_cmd_hdr);
+	if (count > buf_size) {
+		IWM_CRIT(iwm, "count %d, buf size:%ld\n", count, buf_size);
+		return -EINVAL;
+	}
+
+	resp = GET_VAL32(wifi_hdr->sw_hdr.meta_data, UMAC_FW_CMD_STATUS);
+
+	seq_num = le16_to_cpu(wifi_hdr->sw_hdr.cmd.seq_num);
+
+	IWM_DBG_RX(iwm, DBG, "CMD:0x%x, source: 0x%x, seqnum: %d\n",
+		   cmd_id, source, seq_num);
+
+	/*
+	 * If this is a response to a previously sent command, there must
+	 * be a pending command for this sequence number.
+	 */
+	cmd = iwm_get_pending_wifi_cmd(iwm, seq_num);
+
+	/* Notify the caller only for sync commands. */
+	switch (source) {
+	case UMAC_HDI_IN_SOURCE_FHRX:
+		if (iwm->lmac_handlers[cmd_id] &&
+		    test_bit(cmd_id, &iwm->lmac_handler_map[0]))
+			return iwm_notif_send(iwm, cmd, cmd_id, source,
+					      buf, count);
+		break;
+	case UMAC_HDI_IN_SOURCE_FW:
+		if (iwm->umac_handlers[cmd_id] &&
+		    test_bit(cmd_id, &iwm->umac_handler_map[0]))
+			return iwm_notif_send(iwm, cmd, cmd_id, source,
+					      buf, count);
+		break;
+	case UMAC_HDI_IN_SOURCE_UDMA:
+		break;
+	}
+
+	return iwm_rx_handle_resp(iwm, buf, count, cmd);
+}
+
+int iwm_rx_handle_resp(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size,
+		       struct iwm_wifi_cmd *cmd)
+{
+	u8 source, cmd_id;
+	struct iwm_umac_wifi_in_hdr *wifi_hdr;
+	int ret = 0;
+
+	wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+	cmd_id = wifi_hdr->sw_hdr.cmd.cmd;
+
+	source = GET_VAL32(wifi_hdr->hw_hdr.cmd, UMAC_HDI_IN_CMD_SOURCE);
+
+	IWM_DBG_RX(iwm, DBG, "CMD:0x%x, source: 0x%x\n", cmd_id, source);
+
+	switch (source) {
+	case UMAC_HDI_IN_SOURCE_FHRX:
+		if (iwm->lmac_handlers[cmd_id])
+			ret = iwm->lmac_handlers[cmd_id]
+					(iwm, buf, buf_size, cmd);
+		break;
+	case UMAC_HDI_IN_SOURCE_FW:
+		if (iwm->umac_handlers[cmd_id])
+			ret = iwm->umac_handlers[cmd_id]
+					(iwm, buf, buf_size, cmd);
+		break;
+	case UMAC_HDI_IN_SOURCE_UDMA:
+		ret = -EINVAL;
+		break;
+	}
+
+	kfree(cmd);
+
+	return ret;
+}
+
+static int iwm_rx_handle_nonwifi(struct iwm_priv *iwm, u8 *buf,
+				 unsigned long buf_size)
+{
+	u8 seq_num;
+	struct iwm_udma_in_hdr *hdr = (struct iwm_udma_in_hdr *)buf;
+	struct iwm_nonwifi_cmd *cmd, *next;
+
+	seq_num = GET_VAL32(hdr->cmd, UDMA_HDI_IN_CMD_NON_WIFI_HW_SEQ_NUM);
+
+	/*
+	 * We received a non wifi answer.
+	 * Let's check if there's a pending command for it, and if so
+	 * replace the command payload with the buffer, and then wake the
+	 * callers up.
+	 * That means we only support synchronised non wifi command response
+	 * schemes.
+	 */
+	list_for_each_entry_safe(cmd, next, &iwm->nonwifi_pending_cmd, pending)
+		if (cmd->seq_num == seq_num) {
+			cmd->resp_received = 1;
+			cmd->buf.len = buf_size;
+			memcpy(cmd->buf.hdr, buf, buf_size);
+			wake_up_interruptible(&iwm->nonwifi_queue);
+		}
+
+	return 0;
+}
+
+static int iwm_rx_handle_umac(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size)
+{
+	int ret = 0;
+	u8 op_code;
+	unsigned long buf_offset = 0;
+	struct iwm_udma_in_hdr *hdr;
+
+	/*
+	 * To allow for a more efficient bus usage, UMAC
+	 * messages are encapsulated into UDMA ones. This
+	 * way we can have several UMAC messages in one bus
+	 * transfer.
+	 * A UDMA frame size is always aligned on 16 bytes,
+	 * and a UDMA frame must not start with a UMAC_PAD_TERMINAL
+	 * word. This is how we parse a bus frame into several
+	 * UDMA ones.
+	 */
+	while (buf_offset < buf_size) {
+
+		hdr = (struct iwm_udma_in_hdr *)(buf + buf_offset);
+
+		if (iwm_rx_check_udma_hdr(hdr) < 0) {
+			IWM_DBG_RX(iwm, DBG, "End of frame\n");
+			break;
+		}
+
+		op_code = GET_VAL32(hdr->cmd, UMAC_HDI_IN_CMD_OPCODE);
+
+		IWM_DBG_RX(iwm, DBG, "Op code: 0x%x\n", op_code);
+
+		if (op_code == UMAC_HDI_IN_OPCODE_WIFI) {
+			ret |= iwm_rx_handle_wifi(iwm, buf + buf_offset,
+						  buf_size - buf_offset);
+		} else if (op_code < UMAC_HDI_IN_OPCODE_NONWIFI_MAX) {
+			if (GET_VAL32(hdr->cmd,
+				      UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG) !=
+			    UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG) {
+				IWM_ERR(iwm, "Incorrect hw signature\n");
+				return -EINVAL;
+			}
+			ret |= iwm_rx_handle_nonwifi(iwm, buf + buf_offset,
+						     buf_size - buf_offset);
+		} else {
+			IWM_ERR(iwm, "Invalid RX opcode: 0x%x\n", op_code);
+			ret |= -EINVAL;
+		}
+
+		buf_offset += iwm_rx_resp_size(hdr);
+	}
+
+	return ret;
+}
+
+int iwm_rx_handle(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size)
+{
+	struct iwm_udma_in_hdr *hdr;
+
+	hdr = (struct iwm_udma_in_hdr *)buf;
+
+	switch (le32_to_cpu(hdr->cmd)) {
+	case UMAC_REBOOT_BARKER:
+		return iwm_notif_send(iwm, NULL, IWM_BARKER_REBOOT_NOTIFICATION,
+				      IWM_SRC_UDMA, buf, buf_size);
+	case UMAC_ACK_BARKER:
+		return iwm_notif_send(iwm, NULL, IWM_ACK_BARKER_NOTIFICATION,
+				      IWM_SRC_UDMA, NULL, 0);
+	default:
+		IWM_DBG_RX(iwm, DBG, "Received cmd: 0x%x\n", hdr->cmd);
+		return iwm_rx_handle_umac(iwm, buf, buf_size);
+	}
+
+	return 0;
+}
+
+static const iwm_handler iwm_umac_handlers[] =
+{
+	[UMAC_NOTIFY_OPCODE_ERROR]		= iwm_ntf_error,
+	[UMAC_NOTIFY_OPCODE_ALIVE]		= iwm_ntf_umac_alive,
+	[UMAC_NOTIFY_OPCODE_INIT_COMPLETE]	= iwm_ntf_init_complete,
+	[UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS]	= iwm_ntf_wifi_status,
+	[UMAC_NOTIFY_OPCODE_WIFI_IF_WRAPPER]	= iwm_ntf_mlme,
+	[UMAC_NOTIFY_OPCODE_PAGE_DEALLOC]	= iwm_ntf_tx_credit_update,
+	[UMAC_NOTIFY_OPCODE_RX_TICKET]		= iwm_ntf_rx_ticket,
+	[UMAC_CMD_OPCODE_RESET]			= iwm_ntf_umac_reset,
+	[UMAC_NOTIFY_OPCODE_STATS]		= iwm_ntf_statistics,
+	[UMAC_CMD_OPCODE_EEPROM_PROXY]		= iwm_ntf_eeprom_proxy,
+	[UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST]	= iwm_ntf_channel_info_list,
+	[REPLY_RX_MPDU_CMD]			= iwm_ntf_rx_packet,
+	[UMAC_CMD_OPCODE_WIFI_IF_WRAPPER]	= iwm_ntf_wifi_if_wrapper,
+};
+
+static const iwm_handler iwm_lmac_handlers[] =
+{
+	[REPLY_TX]				= iwm_ntf_tx,
+	[REPLY_ALIVE]				= iwm_ntf_lmac_version,
+	[CALIBRATION_RES_NOTIFICATION]		= iwm_ntf_calib_res,
+	[CALIBRATION_COMPLETE_NOTIFICATION]	= iwm_ntf_calib_complete,
+	[CALIBRATION_CFG_CMD]			= iwm_ntf_calib_cfg,
+	[REPLY_RX_MPDU_CMD]			= iwm_ntf_rx_packet,
+	[CARD_STATE_NOTIFICATION]		= iwm_ntf_card_state,
+};
+
+void iwm_rx_setup_handlers(struct iwm_priv *iwm)
+{
+	iwm->umac_handlers = (iwm_handler *) iwm_umac_handlers;
+	iwm->lmac_handlers = (iwm_handler *) iwm_lmac_handlers;
+}
+
+static void iwm_remove_iv(struct sk_buff *skb, u32 hdr_total_len)
+{
+	struct ieee80211_hdr *hdr;
+	unsigned int hdr_len;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+
+	if (!ieee80211_has_protected(hdr->frame_control))
+		return;
+
+	hdr_len = ieee80211_hdrlen(hdr->frame_control);
+	if (hdr_total_len <= hdr_len)
+		return;
+
+	memmove(skb->data + (hdr_total_len - hdr_len), skb->data, hdr_len);
+	skb_pull(skb, (hdr_total_len - hdr_len));
+}
+
+static void iwm_rx_adjust_packet(struct iwm_priv *iwm,
+				 struct iwm_rx_packet *packet,
+				 struct iwm_rx_ticket_node *ticket_node)
+{
+	u32 payload_offset = 0, payload_len;
+	struct iwm_rx_ticket *ticket = ticket_node->ticket;
+	struct iwm_rx_mpdu_hdr *mpdu_hdr;
+	struct ieee80211_hdr *hdr;
+
+	mpdu_hdr = (struct iwm_rx_mpdu_hdr *)packet->skb->data;
+	payload_offset += sizeof(struct iwm_rx_mpdu_hdr);
+	/* Padding is 0 or 2 bytes */
+	payload_len = le16_to_cpu(mpdu_hdr->len) +
+		(le16_to_cpu(ticket->flags) & IWM_RX_TICKET_PAD_SIZE_MSK);
+	payload_len -= ticket->tail_len;
+
+	IWM_DBG_RX(iwm, DBG, "Packet adjusted, len:%d, offset:%d, "
+		   "ticket offset:%d ticket tail len:%d\n",
+		   payload_len, payload_offset, ticket->payload_offset,
+		   ticket->tail_len);
+
+	IWM_HEXDUMP(iwm, DBG, RX, "RAW: ", packet->skb->data, packet->skb->len);
+
+	skb_pull(packet->skb, payload_offset);
+	skb_trim(packet->skb, payload_len);
+
+	iwm_remove_iv(packet->skb, ticket->payload_offset);
+
+	hdr = (struct ieee80211_hdr *) packet->skb->data;
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		/* UMAC handed QOS_DATA frame with 2 padding bytes appended
+		 * to the qos_ctl field in IEEE 802.11 headers. */
+		memmove(packet->skb->data + IEEE80211_QOS_CTL_LEN + 2,
+			packet->skb->data,
+			ieee80211_hdrlen(hdr->frame_control) -
+			IEEE80211_QOS_CTL_LEN);
+		hdr = (struct ieee80211_hdr *) skb_pull(packet->skb,
+				IEEE80211_QOS_CTL_LEN + 2);
+		hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+	}
+
+	IWM_HEXDUMP(iwm, DBG, RX, "ADJUSTED: ",
+		    packet->skb->data, packet->skb->len);
+}
+
+static void classify8023(struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		/* frame has qos control */
+		skb->priority = *qc & IEEE80211_QOS_CTL_TID_MASK;
+	} else {
+		skb->priority = 0;
+	}
+}
+
+static void iwm_rx_process_packet(struct iwm_priv *iwm,
+				  struct iwm_rx_packet *packet,
+				  struct iwm_rx_ticket_node *ticket_node)
+{
+	int ret;
+	struct sk_buff *skb = packet->skb;
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+	struct net_device *ndev = iwm_to_ndev(iwm);
+
+	IWM_DBG_RX(iwm, DBG, "Processing packet ID %d\n", packet->id);
+
+	switch (le16_to_cpu(ticket_node->ticket->action)) {
+	case IWM_RX_TICKET_RELEASE:
+		IWM_DBG_RX(iwm, DBG, "RELEASE packet\n");
+		classify8023(skb);
+		iwm_rx_adjust_packet(iwm, packet, ticket_node);
+		ret = ieee80211_data_to_8023(skb, ndev->dev_addr, wdev->iftype);
+		if (ret < 0) {
+			IWM_DBG_RX(iwm, DBG, "Couldn't convert 802.11 header - "
+				   "%d\n", ret);
+			break;
+		}
+
+		IWM_HEXDUMP(iwm, DBG, RX, "802.3: ", skb->data, skb->len);
+
+		skb->dev = iwm_to_ndev(iwm);
+		skb->protocol = eth_type_trans(skb, ndev);
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		memset(skb->cb, 0, sizeof(skb->cb));
+
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += skb->len;
+
+		if (netif_rx(skb) == NET_RX_DROP) {
+			IWM_ERR(iwm, "Packet dropped\n");
+			ndev->stats.rx_dropped++;
+		}
+		break;
+	case IWM_RX_TICKET_DROP:
+		IWM_DBG_RX(iwm, DBG, "DROP packet\n");
+		kfree_skb(packet->skb);
+		break;
+	default:
+		IWM_ERR(iwm, "Unknow ticket action: %d\n",
+			le16_to_cpu(ticket_node->ticket->action));
+		kfree_skb(packet->skb);
+	}
+
+	kfree(packet);
+	iwm_rx_ticket_node_free(ticket_node);
+}
+
+/*
+ * Rx data processing:
+ *
+ * We're receiving Rx packet from the LMAC, and Rx ticket from
+ * the UMAC.
+ * To forward a target data packet upstream (i.e. to the
+ * kernel network stack), we must have received an Rx ticket
+ * that tells us we're allowed to release this packet (ticket
+ * action is IWM_RX_TICKET_RELEASE). The Rx ticket also indicates,
+ * among other things, where valid data actually starts in the Rx
+ * packet.
+ */
+void iwm_rx_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	struct iwm_rx_ticket_node *ticket, *next;
+
+	iwm = container_of(work, struct iwm_priv, rx_worker);
+
+	/*
+	 * We go through the tickets list and if there is a pending
+	 * packet for it, we push it upstream.
+	 * We stop whenever a ticket is missing its packet, as we're
+	 * supposed to send the packets in order.
+	 */
+	list_for_each_entry_safe(ticket, next, &iwm->rx_tickets, node) {
+		struct iwm_rx_packet *packet =
+			iwm_rx_packet_get(iwm, le16_to_cpu(ticket->ticket->id));
+
+		if (!packet) {
+			IWM_DBG_RX(iwm, DBG, "Skip rx_work: Wait for ticket %d "
+				   "to be handled first\n",
+				   le16_to_cpu(ticket->ticket->id));
+			return;
+		}
+
+		list_del(&ticket->node);
+		list_del(&packet->node);
+		iwm_rx_process_packet(iwm, packet, ticket);
+	}
+}
+
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.h b/drivers/net/wireless/iwmc3200wifi/rx.h
new file mode 100644
index 00000000000..da0db91cee5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/rx.h
@@ -0,0 +1,60 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_RX_H__
+#define __IWM_RX_H__
+
+#include <linux/skbuff.h>
+
+#include "umac.h"
+
+struct iwm_rx_ticket_node {
+	struct list_head node;
+	struct iwm_rx_ticket *ticket;
+};
+
+struct iwm_rx_packet {
+	struct list_head node;
+	u16 id;
+	struct sk_buff *skb;
+	unsigned long pkt_size;
+};
+
+void iwm_rx_worker(struct work_struct *work);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
new file mode 100644
index 00000000000..b54da677b37
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -0,0 +1,516 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+/*
+ * This is the SDIO bus specific hooks for iwm.
+ * It also is the module's entry point.
+ *
+ * Interesting code paths:
+ * iwm_sdio_probe() (Called by an SDIO bus scan)
+ *  -> iwm_if_alloc() (netdev.c)
+ *      -> iwm_wdev_alloc() (cfg80211.c, allocates and register our wiphy)
+ *          -> wiphy_new()
+ *          -> wiphy_register()
+ *      -> alloc_netdev_mq()
+ *      -> register_netdev()
+ *
+ * iwm_sdio_remove()
+ *  -> iwm_if_free() (netdev.c)
+ *      -> unregister_netdev()
+ *      -> iwm_wdev_free() (cfg80211.c)
+ *          -> wiphy_unregister()
+ *          -> wiphy_free()
+ *
+ * iwm_sdio_isr() (called in process context from the SDIO core code)
+ *  -> queue_work(.., isr_worker)
+ *      -- [async] --> iwm_sdio_isr_worker()
+ *                      -> iwm_rx_handle()
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "bus.h"
+#include "sdio.h"
+
+static void iwm_sdio_isr_worker(struct work_struct *work)
+{
+	struct iwm_sdio_priv *hw;
+	struct iwm_priv *iwm;
+	struct iwm_rx_info *rx_info;
+	struct sk_buff *skb;
+	u8 *rx_buf;
+	unsigned long rx_size;
+
+	hw = container_of(work, struct iwm_sdio_priv, isr_worker);
+	iwm = hw_to_iwm(hw);
+
+	while (!skb_queue_empty(&iwm->rx_list)) {
+		skb = skb_dequeue(&iwm->rx_list);
+		rx_info = skb_to_rx_info(skb);
+		rx_size = rx_info->rx_size;
+		rx_buf = skb->data;
+
+		IWM_HEXDUMP(iwm, DBG, SDIO, "RX: ", rx_buf, rx_size);
+		if (iwm_rx_handle(iwm, rx_buf, rx_size) < 0)
+			IWM_WARN(iwm, "RX error\n");
+
+		kfree_skb(skb);
+	}
+}
+
+static void iwm_sdio_isr(struct sdio_func *func)
+{
+	struct iwm_priv *iwm;
+	struct iwm_sdio_priv *hw;
+	struct iwm_rx_info *rx_info;
+	struct sk_buff *skb;
+	unsigned long buf_size, read_size;
+	int ret;
+	u8 val;
+
+	hw = sdio_get_drvdata(func);
+	iwm = hw_to_iwm(hw);
+
+	buf_size = hw->blk_size;
+
+	/* We're checking the status */
+	val = sdio_readb(func, IWM_SDIO_INTR_STATUS_ADDR, &ret);
+	if (val == 0 || ret < 0) {
+		IWM_ERR(iwm, "Wrong INTR_STATUS\n");
+		return;
+	}
+
+	/* See if we have free buffers */
+	if (skb_queue_len(&iwm->rx_list) > IWM_RX_LIST_SIZE) {
+		IWM_ERR(iwm, "No buffer for more Rx frames\n");
+		return;
+	}
+
+	/* We first read the transaction size */
+	read_size = sdio_readb(func, IWM_SDIO_INTR_GET_SIZE_ADDR + 1, &ret);
+	read_size = read_size << 8;
+
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't read the xfer size\n");
+		return;
+	}
+
+	/* We need to clear the INT register */
+	sdio_writeb(func, 1, IWM_SDIO_INTR_CLEAR_ADDR, &ret);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't clear the INT register\n");
+		return;
+	}
+
+	while (buf_size < read_size)
+		buf_size <<= 1;
+
+	skb = dev_alloc_skb(buf_size);
+	if (!skb) {
+		IWM_ERR(iwm, "Couldn't alloc RX skb\n");
+		return;
+	}
+	rx_info = skb_to_rx_info(skb);
+	rx_info->rx_size = read_size;
+	rx_info->rx_buf_size = buf_size;
+
+	/* Now we can read the actual buffer */
+	ret = sdio_memcpy_fromio(func, skb_put(skb, read_size),
+				 IWM_SDIO_DATA_ADDR, read_size);
+
+	/* The skb is put on a driver's specific Rx SKB list */
+	skb_queue_tail(&iwm->rx_list, skb);
+
+	/* We can now schedule the actual worker */
+	queue_work(hw->isr_wq, &hw->isr_worker);
+}
+
+static void iwm_sdio_rx_free(struct iwm_sdio_priv *hw)
+{
+	struct iwm_priv *iwm = hw_to_iwm(hw);
+
+	flush_workqueue(hw->isr_wq);
+
+	skb_queue_purge(&iwm->rx_list);
+}
+
+/* Bus ops */
+static int if_sdio_enable(struct iwm_priv *iwm)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	int ret;
+
+	sdio_claim_host(hw->func);
+
+	ret = sdio_enable_func(hw->func);
+	if (ret) {
+		IWM_ERR(iwm, "Couldn't enable the device: is TOP driver "
+			"loaded and functional?\n");
+		goto release_host;
+	}
+
+	iwm_reset(iwm);
+
+	ret = sdio_claim_irq(hw->func, iwm_sdio_isr);
+	if (ret) {
+		IWM_ERR(iwm, "Failed to claim irq: %d\n", ret);
+		goto release_host;
+	}
+
+	sdio_writeb(hw->func, 1, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't enable INTR: %d\n", ret);
+		goto release_irq;
+	}
+
+	sdio_release_host(hw->func);
+
+	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO enable\n");
+
+	return 0;
+
+ release_irq:
+	sdio_release_irq(hw->func);
+ release_host:
+	sdio_release_host(hw->func);
+
+	return ret;
+}
+
+static int if_sdio_disable(struct iwm_priv *iwm)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	int ret;
+
+	iwm_reset(iwm);
+
+	sdio_claim_host(hw->func);
+	sdio_writeb(hw->func, 0, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
+	if (ret < 0)
+		IWM_WARN(iwm, "Couldn't disable INTR: %d\n", ret);
+
+	sdio_release_irq(hw->func);
+	sdio_disable_func(hw->func);
+	sdio_release_host(hw->func);
+
+	iwm_sdio_rx_free(hw);
+
+	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO disable\n");
+
+	return 0;
+}
+
+static int if_sdio_send_chunk(struct iwm_priv *iwm, u8 *buf, int count)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	int aligned_count = ALIGN(count, hw->blk_size);
+	int ret;
+
+	if ((unsigned long)buf & 0x3) {
+		IWM_ERR(iwm, "buf <%p> is not dword aligned\n", buf);
+		/* TODO: Is this a hardware limitation? use get_unligned */
+		return -EINVAL;
+	}
+
+	sdio_claim_host(hw->func);
+	ret = sdio_memcpy_toio(hw->func, IWM_SDIO_DATA_ADDR, buf,
+			       aligned_count);
+	sdio_release_host(hw->func);
+
+	return ret;
+}
+
+/* debugfs hooks */
+static int iwm_debugfs_sdio_open(struct inode *inode, struct file *filp)
+{
+	filp->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t iwm_debugfs_sdio_read(struct file *filp, char __user *buffer,
+				     size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	char *buf;
+	u8 cccr;
+	int buf_len = 4096, ret;
+	size_t len = 0;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	sdio_claim_host(hw->func);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IOEx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IOEx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IOEx:  0x%x\n", cccr);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IORx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IORx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IORx:  0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IENx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IENx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IENx:  0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_INTx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_INTx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_INTx:  0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_ABORT, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_ABORTx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_ABORT: 0x%x\n", cccr);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IF, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IF\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IF:    0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_CAPS, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_CAPS\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_CAPS:  0x%x\n", cccr);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_CIS, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_CIS\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_CIS:   0x%x\n", cccr);
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+err:
+	sdio_release_host(hw->func);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations iwm_debugfs_sdio_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_debugfs_sdio_open,
+	.read =		iwm_debugfs_sdio_read,
+};
+
+static int if_sdio_debugfs_init(struct iwm_priv *iwm, struct dentry *parent_dir)
+{
+	int result;
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+
+	hw->cccr_dentry = debugfs_create_file("cccr", 0200,
+					      parent_dir, iwm,
+					      &iwm_debugfs_sdio_fops);
+	result = PTR_ERR(hw->cccr_dentry);
+	if (IS_ERR(hw->cccr_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create CCCR entry: %d\n", result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void if_sdio_debugfs_exit(struct iwm_priv *iwm)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+
+	debugfs_remove(hw->cccr_dentry);
+}
+
+static struct iwm_if_ops if_sdio_ops = {
+	.enable = if_sdio_enable,
+	.disable = if_sdio_disable,
+	.send_chunk = if_sdio_send_chunk,
+	.debugfs_init = if_sdio_debugfs_init,
+	.debugfs_exit = if_sdio_debugfs_exit,
+	.umac_name = "iwmc3200wifi-umac-sdio.bin",
+	.calib_lmac_name = "iwmc3200wifi-calib-sdio.bin",
+	.lmac_name = "iwmc3200wifi-lmac-sdio.bin",
+};
+
+static int iwm_sdio_probe(struct sdio_func *func,
+			  const struct sdio_device_id *id)
+{
+	struct iwm_priv *iwm;
+	struct iwm_sdio_priv *hw;
+	struct device *dev = &func->dev;
+	int ret;
+
+	/* check if TOP has already initialized the card */
+	sdio_claim_host(func);
+	ret = sdio_enable_func(func);
+	if (ret) {
+		dev_err(dev, "wait for TOP to enable the device\n");
+		sdio_release_host(func);
+		return ret;
+	}
+
+	ret = sdio_set_block_size(func, IWM_SDIO_BLK_SIZE);
+
+	sdio_disable_func(func);
+	sdio_release_host(func);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to set block size: %d\n", ret);
+		return ret;
+	}
+
+	iwm = iwm_if_alloc(sizeof(struct iwm_sdio_priv), dev, &if_sdio_ops);
+	if (IS_ERR(iwm)) {
+		dev_err(dev, "allocate SDIO interface failed\n");
+		return PTR_ERR(iwm);
+	}
+
+	hw = iwm_private(iwm);
+	hw->iwm = iwm;
+
+	ret = iwm_debugfs_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Debugfs registration failed\n");
+		goto if_free;
+	}
+
+	sdio_set_drvdata(func, hw);
+
+	hw->func = func;
+	hw->blk_size = IWM_SDIO_BLK_SIZE;
+
+	hw->isr_wq = create_singlethread_workqueue(KBUILD_MODNAME "_sdio");
+	if (!hw->isr_wq) {
+		ret = -ENOMEM;
+		goto debugfs_exit;
+	}
+
+	INIT_WORK(&hw->isr_worker, iwm_sdio_isr_worker);
+
+	dev_info(dev, "IWM SDIO probe\n");
+
+	return 0;
+
+ debugfs_exit:
+	iwm_debugfs_exit(iwm);
+ if_free:
+	iwm_if_free(iwm);
+	return ret;
+}
+
+static void iwm_sdio_remove(struct sdio_func *func)
+{
+	struct iwm_sdio_priv *hw = sdio_get_drvdata(func);
+	struct iwm_priv *iwm = hw_to_iwm(hw);
+	struct device *dev = &func->dev;
+
+	iwm_debugfs_exit(iwm);
+	iwm_if_free(iwm);
+	destroy_workqueue(hw->isr_wq);
+
+	sdio_set_drvdata(func, NULL);
+
+	dev_info(dev, "IWM SDIO remove\n");
+
+	return;
+}
+
+static const struct sdio_device_id iwm_sdio_ids[] = {
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, SDIO_DEVICE_ID_IWM) },
+	{ /* end: all zeroes */	},
+};
+MODULE_DEVICE_TABLE(sdio, iwm_sdio_ids);
+
+static struct sdio_driver iwm_sdio_driver = {
+	.name		= "iwm_sdio",
+	.id_table	= iwm_sdio_ids,
+	.probe		= iwm_sdio_probe,
+	.remove		= iwm_sdio_remove,
+};
+
+static int __init iwm_sdio_init_module(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&iwm_sdio_driver);
+
+	return ret;
+}
+
+static void __exit iwm_sdio_exit_module(void)
+{
+	sdio_unregister_driver(&iwm_sdio_driver);
+}
+
+module_init(iwm_sdio_init_module);
+module_exit(iwm_sdio_exit_module);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(IWM_COPYRIGHT " " IWM_AUTHOR);
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.h b/drivers/net/wireless/iwmc3200wifi/sdio.h
new file mode 100644
index 00000000000..b3c156b08dd
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.h
@@ -0,0 +1,67 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_SDIO_H__
+#define __IWM_SDIO_H__
+
+#define SDIO_VENDOR_ID_INTEL 0x89
+#define SDIO_DEVICE_ID_IWM   0x1403
+
+#define IWM_SDIO_DATA_ADDR           0x0
+#define IWM_SDIO_INTR_ENABLE_ADDR    0x14
+#define IWM_SDIO_INTR_STATUS_ADDR    0x13
+#define IWM_SDIO_INTR_CLEAR_ADDR     0x13
+#define IWM_SDIO_INTR_GET_SIZE_ADDR  0x2C
+
+#define IWM_SDIO_BLK_SIZE       256
+
+#define iwm_to_if_sdio(i) (struct iwm_sdio_priv *)(iwm->private)
+
+struct iwm_sdio_priv {
+	struct sdio_func *func;
+	struct iwm_priv *iwm;
+
+	struct workqueue_struct *isr_wq;
+	struct work_struct isr_worker;
+
+	struct dentry *cccr_dentry;
+
+	unsigned int blk_size;
+};
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c
new file mode 100644
index 00000000000..e3b4f7902da
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/tx.c
@@ -0,0 +1,492 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+/*
+ * iwm Tx theory of operation:
+ *
+ * 1) We receive a 802.3 frame from the stack
+ * 2) We convert it to a 802.11 frame [iwm_xmit_frame]
+ * 3) We queue it to its corresponding tx queue [iwm_xmit_frame]
+ * 4) We schedule the tx worker. There is one worker per tx
+ *    queue. [iwm_xmit_frame]
+ * 5) The tx worker is scheduled
+ * 6) We go through every queued skb on the tx queue, and for each
+ *    and every one of them: [iwm_tx_worker]
+ *    a) We check if we have enough Tx credits (see below for a Tx
+ *       credits description) for the frame length. [iwm_tx_worker]
+ *    b) If we do, we aggregate the Tx frame into a UDMA one, by
+ *       concatenating one REPLY_TX command per Tx frame. [iwm_tx_worker]
+ *    c) When we run out of credits, or when we reach the maximum
+ *       concatenation size, we actually send the concatenated UDMA
+ *       frame. [iwm_tx_worker]
+ *
+ * When we run out of Tx credits, the skbs are filling the tx queue,
+ * and eventually we will stop the netdev queue. [iwm_tx_worker]
+ * The tx queue is emptied as we're getting new tx credits, by
+ * scheduling the tx_worker. [iwm_tx_credit_inc]
+ * The netdev queue is started again when we have enough tx credits,
+ * and when our tx queue has some reasonable amout of space available
+ * (i.e. half of the max size). [iwm_tx_worker]
+ */
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ieee80211.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "commands.h"
+#include "hal.h"
+#include "umac.h"
+#include "bus.h"
+
+#define IWM_UMAC_PAGE_ALLOC_WRAP 0xffff
+
+#define BYTES_TO_PAGES(n)	 (1 + ((n) >> ilog2(IWM_UMAC_PAGE_SIZE)) - \
+				 (((n) & (IWM_UMAC_PAGE_SIZE - 1)) == 0))
+
+#define pool_id_to_queue(id)	 ((id < IWM_TX_CMD_QUEUE) ? id : id - 1)
+#define queue_to_pool_id(q)	 ((q < IWM_TX_CMD_QUEUE) ? q : q + 1)
+
+/* require to hold tx_credit lock */
+static int iwm_tx_credit_get(struct iwm_tx_credit *tx_credit, int id)
+{
+	struct pool_entry *pool = &tx_credit->pools[id];
+	struct spool_entry *spool = &tx_credit->spools[pool->sid];
+	int spool_pages;
+
+	/* number of pages can be taken from spool by this pool */
+	spool_pages = spool->max_pages - spool->alloc_pages +
+		      max(pool->min_pages - pool->alloc_pages, 0);
+
+	return min(pool->max_pages - pool->alloc_pages, spool_pages);
+}
+
+static bool iwm_tx_credit_ok(struct iwm_priv *iwm, int id, int nb)
+{
+	u32 npages = BYTES_TO_PAGES(nb);
+
+	if (npages <= iwm_tx_credit_get(&iwm->tx_credit, id))
+		return 1;
+
+	set_bit(id, &iwm->tx_credit.full_pools_map);
+
+	IWM_DBG_TX(iwm, DBG, "LINK: stop txq[%d], available credit: %d\n",
+		   pool_id_to_queue(id),
+		   iwm_tx_credit_get(&iwm->tx_credit, id));
+
+	return 0;
+}
+
+void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages)
+{
+	struct pool_entry *pool;
+	struct spool_entry *spool;
+	int freed_pages;
+	int queue;
+
+	BUG_ON(id >= IWM_MACS_OUT_GROUPS);
+
+	pool = &iwm->tx_credit.pools[id];
+	spool = &iwm->tx_credit.spools[pool->sid];
+
+	freed_pages = total_freed_pages - pool->total_freed_pages;
+	IWM_DBG_TX(iwm, DBG, "Free %d pages for pool[%d]\n", freed_pages, id);
+
+	if (!freed_pages) {
+		IWM_DBG_TX(iwm, DBG, "No pages are freed by UMAC\n");
+		return;
+	} else if (freed_pages < 0)
+		freed_pages += IWM_UMAC_PAGE_ALLOC_WRAP + 1;
+
+	if (pool->alloc_pages > pool->min_pages) {
+		int spool_pages = pool->alloc_pages - pool->min_pages;
+		spool_pages = min(spool_pages, freed_pages);
+		spool->alloc_pages -= spool_pages;
+	}
+
+	pool->alloc_pages -= freed_pages;
+	pool->total_freed_pages = total_freed_pages;
+
+	IWM_DBG_TX(iwm, DBG, "Pool[%d] pages alloc: %d, total_freed: %d, "
+		   "Spool[%d] pages alloc: %d\n", id, pool->alloc_pages,
+		   pool->total_freed_pages, pool->sid, spool->alloc_pages);
+
+	if (test_bit(id, &iwm->tx_credit.full_pools_map) &&
+	    (pool->alloc_pages < pool->max_pages / 2)) {
+		clear_bit(id, &iwm->tx_credit.full_pools_map);
+
+		queue = pool_id_to_queue(id);
+
+		IWM_DBG_TX(iwm, DBG, "LINK: start txq[%d], available "
+			   "credit: %d\n", queue,
+			   iwm_tx_credit_get(&iwm->tx_credit, id));
+		queue_work(iwm->txq[queue].wq, &iwm->txq[queue].worker);
+	}
+}
+
+static void iwm_tx_credit_dec(struct iwm_priv *iwm, int id, int alloc_pages)
+{
+	struct pool_entry *pool;
+	struct spool_entry *spool;
+	int spool_pages;
+
+	IWM_DBG_TX(iwm, DBG, "Allocate %d pages for pool[%d]\n",
+		   alloc_pages, id);
+
+	BUG_ON(id >= IWM_MACS_OUT_GROUPS);
+
+	pool = &iwm->tx_credit.pools[id];
+	spool = &iwm->tx_credit.spools[pool->sid];
+
+	spool_pages = pool->alloc_pages + alloc_pages - pool->min_pages;
+
+	if (pool->alloc_pages >= pool->min_pages)
+		spool->alloc_pages += alloc_pages;
+	else if (spool_pages > 0)
+		spool->alloc_pages += spool_pages;
+
+	pool->alloc_pages += alloc_pages;
+
+	IWM_DBG_TX(iwm, DBG, "Pool[%d] pages alloc: %d, total_freed: %d, "
+		   "Spool[%d] pages alloc: %d\n", id, pool->alloc_pages,
+		   pool->total_freed_pages, pool->sid, spool->alloc_pages);
+}
+
+int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb)
+{
+	u32 npages = BYTES_TO_PAGES(nb);
+	int ret = 0;
+
+	spin_lock(&iwm->tx_credit.lock);
+
+	if (!iwm_tx_credit_ok(iwm, id, nb)) {
+		IWM_DBG_TX(iwm, DBG, "No credit avaliable for pool[%d]\n", id);
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	iwm_tx_credit_dec(iwm, id, npages);
+
+ out:
+	spin_unlock(&iwm->tx_credit.lock);
+	return ret;
+}
+
+/*
+ * Since we're on an SDIO or USB bus, we are not sharing memory
+ * for storing to be transmitted frames. The host needs to push
+ * them upstream. As a consequence there needs to be a way for
+ * the target to let us know if it can actually take more TX frames
+ * or not. This is what Tx credits are for.
+ *
+ * For each Tx HW queue, we have a Tx pool, and then we have one
+ * unique super pool (spool), which is actually a global pool of
+ * all the UMAC pages.
+ * For each Tx pool we have a min_pages, a max_pages fields, and a
+ * alloc_pages fields. The alloc_pages tracks the number of pages
+ * currently allocated from the tx pool.
+ * Here are the rules to check if given a tx frame we have enough
+ * tx credits for it:
+ * 1) We translate the frame length into a number of UMAC pages.
+ *    Let's call them n_pages.
+ * 2) For the corresponding tx pool, we check if n_pages +
+ *    pool->alloc_pages is higher than pool->min_pages. min_pages
+ *    represent a set of pre-allocated pages on the tx pool. If
+ *    that's the case, then we need to allocate those pages from
+ *    the spool. We can do so until we reach spool->max_pages.
+ * 3) Each tx pool is not allowed to allocate more than pool->max_pages
+ *    from the spool, so once we're over min_pages, we can allocate
+ *    pages from the spool, but not more than max_pages.
+ *
+ * When the tx code path needs to send a tx frame, it checks first
+ * if it has enough tx credits, following those rules. [iwm_tx_credit_get]
+ * If it does, it then updates the pool and spool counters and
+ * then send the frame. [iwm_tx_credit_alloc and iwm_tx_credit_dec]
+ * On the other side, when the UMAC is done transmitting frames, it
+ * will send a credit update notification to the host. This is when
+ * the pool and spool counters gets to be decreased. [iwm_tx_credit_inc,
+ * called from rx.c:iwm_ntf_tx_credit_update]
+ *
+ */
+void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
+			      struct iwm_umac_notif_alive *alive)
+{
+	int i, sid, pool_pages;
+
+	spin_lock(&iwm->tx_credit.lock);
+
+	iwm->tx_credit.pool_nr = le16_to_cpu(alive->page_grp_count);
+	iwm->tx_credit.full_pools_map = 0;
+	memset(&iwm->tx_credit.spools[0], 0, sizeof(struct spool_entry));
+
+	IWM_DBG_TX(iwm, DBG, "Pools number is %d\n", iwm->tx_credit.pool_nr);
+
+	for (i = 0; i < iwm->tx_credit.pool_nr; i++) {
+		__le32 page_grp_state = alive->page_grp_state[i];
+
+		iwm->tx_credit.pools[i].id = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_GRP_NUM);
+		iwm->tx_credit.pools[i].sid = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_SGRP_NUM);
+		iwm->tx_credit.pools[i].min_pages = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_GRP_MIN_SIZE);
+		iwm->tx_credit.pools[i].max_pages = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_GRP_MAX_SIZE);
+		iwm->tx_credit.pools[i].alloc_pages = 0;
+		iwm->tx_credit.pools[i].total_freed_pages = 0;
+
+		sid = iwm->tx_credit.pools[i].sid;
+		pool_pages = iwm->tx_credit.pools[i].min_pages;
+
+		if (iwm->tx_credit.spools[sid].max_pages == 0) {
+			iwm->tx_credit.spools[sid].id = sid;
+			iwm->tx_credit.spools[sid].max_pages =
+				GET_VAL32(page_grp_state,
+					  UMAC_ALIVE_PAGE_STS_SGRP_MAX_SIZE);
+			iwm->tx_credit.spools[sid].alloc_pages = 0;
+		}
+
+		iwm->tx_credit.spools[sid].alloc_pages += pool_pages;
+
+		IWM_DBG_TX(iwm, DBG, "Pool idx: %d, id: %d, sid: %d, capacity "
+			   "min: %d, max: %d, pool alloc: %d, total_free: %d, "
+			   "super poll alloc: %d\n",
+			   i, iwm->tx_credit.pools[i].id,
+			   iwm->tx_credit.pools[i].sid,
+			   iwm->tx_credit.pools[i].min_pages,
+			   iwm->tx_credit.pools[i].max_pages,
+			   iwm->tx_credit.pools[i].alloc_pages,
+			   iwm->tx_credit.pools[i].total_freed_pages,
+			   iwm->tx_credit.spools[sid].alloc_pages);
+	}
+
+	spin_unlock(&iwm->tx_credit.lock);
+}
+
+#define IWM_UDMA_HDR_LEN	sizeof(struct iwm_umac_wifi_out_hdr)
+
+static int iwm_tx_build_packet(struct iwm_priv *iwm, struct sk_buff *skb,
+			       int pool_id, u8 *buf)
+{
+	struct iwm_umac_wifi_out_hdr *hdr = (struct iwm_umac_wifi_out_hdr *)buf;
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_tx_info *tx_info = skb_to_tx_info(skb);
+
+	udma_cmd.count = cpu_to_le16(skb->len +
+				     sizeof(struct iwm_umac_fw_cmd_hdr));
+	/* set EOP to 0 here. iwm_udma_wifi_hdr_set_eop() will be
+	 * called later to set EOP for the last packet. */
+	udma_cmd.eop = 0;
+	udma_cmd.credit_group = pool_id;
+	udma_cmd.ra_tid = tx_info->sta << 4 | tx_info->tid;
+	udma_cmd.lmac_offset = 0;
+
+	umac_cmd.id = REPLY_TX;
+	umac_cmd.count = cpu_to_le16(skb->len);
+	umac_cmd.color = tx_info->color;
+	umac_cmd.resp = 0;
+	umac_cmd.seq_num = cpu_to_le16(iwm_alloc_wifi_cmd_seq(iwm));
+
+	iwm_build_udma_wifi_hdr(iwm, &hdr->hw_hdr, &udma_cmd);
+	iwm_build_umac_hdr(iwm, &hdr->sw_hdr, &umac_cmd);
+
+	memcpy(buf + sizeof(*hdr), skb->data, skb->len);
+
+	return 0;
+}
+
+static int iwm_tx_send_concat_packets(struct iwm_priv *iwm,
+				      struct iwm_tx_queue *txq)
+{
+	int ret;
+
+	if (!txq->concat_count)
+		return 0;
+
+	IWM_DBG_TX(iwm, DBG, "Send concatenated Tx: queue %d, %d bytes\n",
+		   txq->id, txq->concat_count);
+
+	/* mark EOP for the last packet */
+	iwm_udma_wifi_hdr_set_eop(iwm, txq->concat_ptr, 1);
+
+	ret = iwm_bus_send_chunk(iwm, txq->concat_buf, txq->concat_count);
+
+	txq->concat_count = 0;
+	txq->concat_ptr = txq->concat_buf;
+
+	return ret;
+}
+
+#define CONFIG_IWM_TX_CONCATENATED 1
+
+void iwm_tx_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	struct iwm_tx_info *tx_info = NULL;
+	struct sk_buff *skb;
+	int cmdlen, ret;
+	struct iwm_tx_queue *txq;
+	int pool_id;
+
+	txq = container_of(work, struct iwm_tx_queue, worker);
+	iwm = container_of(txq, struct iwm_priv, txq[txq->id]);
+
+	pool_id = queue_to_pool_id(txq->id);
+
+	while (!test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
+	       !skb_queue_empty(&txq->queue)) {
+
+		skb = skb_dequeue(&txq->queue);
+		tx_info = skb_to_tx_info(skb);
+		cmdlen = IWM_UDMA_HDR_LEN + skb->len;
+
+		IWM_DBG_TX(iwm, DBG, "Tx frame on queue %d: skb: 0x%p, sta: "
+			   "%d, color: %d\n", txq->id, skb, tx_info->sta,
+			   tx_info->color);
+
+#if !CONFIG_IWM_TX_CONCATENATED
+		/* temporarily keep this to comparing the performance */
+		ret = iwm_send_packet(iwm, skb, pool_id);
+#else
+
+		if (txq->concat_count + cmdlen > IWM_HAL_CONCATENATE_BUF_SIZE)
+			iwm_tx_send_concat_packets(iwm, txq);
+
+		ret = iwm_tx_credit_alloc(iwm, pool_id, cmdlen);
+		if (ret) {
+			IWM_DBG_TX(iwm, DBG, "not enough tx_credit for queue "
+				   "%d, Tx worker stopped\n", txq->id);
+			skb_queue_head(&txq->queue, skb);
+			break;
+		}
+
+		txq->concat_ptr = txq->concat_buf + txq->concat_count;
+		iwm_tx_build_packet(iwm, skb, pool_id, txq->concat_ptr);
+		txq->concat_count += ALIGN(cmdlen, 16);
+#endif
+		kfree_skb(skb);
+	}
+
+	iwm_tx_send_concat_packets(iwm, txq);
+
+	if (__netif_subqueue_stopped(iwm_to_ndev(iwm), txq->id) &&
+	    !test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
+	    (skb_queue_len(&txq->queue) < IWM_TX_LIST_SIZE / 2)) {
+		IWM_DBG_TX(iwm, DBG, "LINK: start netif_subqueue[%d]", txq->id);
+		netif_wake_subqueue(iwm_to_ndev(iwm), txq->id);
+	}
+}
+
+int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(netdev);
+	struct net_device *ndev = iwm_to_ndev(iwm);
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+	u8 *dst_addr;
+	struct iwm_tx_info *tx_info;
+	struct iwm_tx_queue *txq;
+	struct iwm_sta_info *sta_info;
+	u8 sta_id;
+	u16 queue;
+	int ret;
+
+	if (!test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+		IWM_DBG_TX(iwm, DBG, "LINK: stop netif_all_queues: "
+			   "not associated\n");
+		netif_tx_stop_all_queues(netdev);
+		goto drop;
+	}
+
+	queue = skb_get_queue_mapping(skb);
+	BUG_ON(queue >= IWM_TX_DATA_QUEUES); /* no iPAN yet */
+
+	txq = &iwm->txq[queue];
+
+	/* No free space for Tx, tx_worker is too slow */
+	if (skb_queue_len(&txq->queue) > IWM_TX_LIST_SIZE) {
+		IWM_DBG_TX(iwm, DBG, "LINK: stop netif_subqueue[%d]\n", queue);
+		netif_stop_subqueue(netdev, queue);
+		return NETDEV_TX_BUSY;
+	}
+
+	ret = ieee80211_data_from_8023(skb, netdev->dev_addr, wdev->iftype,
+				       iwm->bssid, 0);
+	if (ret) {
+		IWM_ERR(iwm, "build wifi header failed\n");
+		goto drop;
+	}
+
+	dst_addr = ((struct ieee80211_hdr *)(skb->data))->addr1;
+
+	for (sta_id = 0; sta_id < IWM_STA_TABLE_NUM; sta_id++) {
+		sta_info = &iwm->sta_table[sta_id];
+		if (sta_info->valid &&
+		    !memcmp(dst_addr, sta_info->addr, ETH_ALEN))
+			break;
+	}
+
+	if (sta_id == IWM_STA_TABLE_NUM) {
+		IWM_ERR(iwm, "STA %pM not found in sta_table, Tx ignored\n",
+			dst_addr);
+		goto drop;
+	}
+
+	tx_info = skb_to_tx_info(skb);
+	tx_info->sta = sta_id;
+	tx_info->color = sta_info->color;
+	/* UMAC uses TID 8 (vs. 0) for non QoS packets */
+	if (sta_info->qos)
+		tx_info->tid = skb->priority;
+	else
+		tx_info->tid = IWM_UMAC_MGMT_TID;
+
+	skb_queue_tail(&iwm->txq[queue].queue, skb);
+
+	queue_work(iwm->txq[queue].wq, &iwm->txq[queue].worker);
+
+	ndev->stats.tx_packets++;
+	ndev->stats.tx_bytes += skb->len;
+	return NETDEV_TX_OK;
+
+ drop:
+	ndev->stats.tx_dropped++;
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/umac.h b/drivers/net/wireless/iwmc3200wifi/umac.h
new file mode 100644
index 00000000000..4a95cce1f0a
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/umac.h
@@ -0,0 +1,744 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_UMAC_H__
+#define __IWM_UMAC_H__
+
+struct iwm_udma_in_hdr {
+	__le32 cmd;
+	__le32 size;
+} __attribute__ ((packed));
+
+struct iwm_udma_out_nonwifi_hdr {
+	__le32 cmd;
+	__le32 addr;
+	__le32 op1_sz;
+	__le32 op2;
+} __attribute__ ((packed));
+
+struct iwm_udma_out_wifi_hdr {
+	__le32 cmd;
+	__le32 meta_data;
+} __attribute__ ((packed));
+
+/* Sequence numbering */
+#define UMAC_WIFI_SEQ_NUM_BASE		1
+#define UMAC_WIFI_SEQ_NUM_MAX		0x4000
+#define UMAC_NONWIFI_SEQ_NUM_BASE	1
+#define UMAC_NONWIFI_SEQ_NUM_MAX	0x10
+
+/* MAC address address */
+#define WICO_MAC_ADDRESS_ADDR               0x604008F8
+
+/* RA / TID */
+#define UMAC_HDI_ACT_TBL_IDX_TID_POS                  0
+#define UMAC_HDI_ACT_TBL_IDX_TID_SEED                 0xF
+
+#define UMAC_HDI_ACT_TBL_IDX_RA_POS                   4
+#define UMAC_HDI_ACT_TBL_IDX_RA_SEED                  0xF
+
+#define UMAC_HDI_ACT_TBL_IDX_RA_UMAC                  0xF
+#define UMAC_HDI_ACT_TBL_IDX_TID_UMAC                 0x9
+#define UMAC_HDI_ACT_TBL_IDX_TID_LMAC                 0xA
+
+#define UMAC_HDI_ACT_TBL_IDX_HOST_CMD \
+	((UMAC_HDI_ACT_TBL_IDX_RA_UMAC << UMAC_HDI_ACT_TBL_IDX_RA_POS) |\
+	 (UMAC_HDI_ACT_TBL_IDX_TID_UMAC << UMAC_HDI_ACT_TBL_IDX_TID_POS))
+#define UMAC_HDI_ACT_TBL_IDX_UMAC_CMD \
+	((UMAC_HDI_ACT_TBL_IDX_RA_UMAC << UMAC_HDI_ACT_TBL_IDX_RA_POS) |\
+	(UMAC_HDI_ACT_TBL_IDX_TID_LMAC << UMAC_HDI_ACT_TBL_IDX_TID_POS))
+
+/* iwm_umac_notif_alive.page_grp_state Group number -- bits [3:0] */
+#define UMAC_ALIVE_PAGE_STS_GRP_NUM_POS		0
+#define UMAC_ALIVE_PAGE_STS_GRP_NUM_SEED	0xF
+
+/* iwm_umac_notif_alive.page_grp_state Super group number -- bits [7:4] */
+#define UMAC_ALIVE_PAGE_STS_SGRP_NUM_POS	4
+#define UMAC_ALIVE_PAGE_STS_SGRP_NUM_SEED	0xF
+
+/* iwm_umac_notif_alive.page_grp_state Group min size -- bits [15:8] */
+#define UMAC_ALIVE_PAGE_STS_GRP_MIN_SIZE_POS	8
+#define UMAC_ALIVE_PAGE_STS_GRP_MIN_SIZE_SEED	0xFF
+
+/* iwm_umac_notif_alive.page_grp_state Group max size -- bits [23:16] */
+#define UMAC_ALIVE_PAGE_STS_GRP_MAX_SIZE_POS	16
+#define UMAC_ALIVE_PAGE_STS_GRP_MAX_SIZE_SEED	0xFF
+
+/* iwm_umac_notif_alive.page_grp_state Super group max size -- bits [31:24] */
+#define UMAC_ALIVE_PAGE_STS_SGRP_MAX_SIZE_POS	24
+#define UMAC_ALIVE_PAGE_STS_SGRP_MAX_SIZE_SEED	0xFF
+
+/* Barkers */
+#define UMAC_REBOOT_BARKER		0xdeadbeef
+#define UMAC_ACK_BARKER			0xfeedbabe
+#define UMAC_PAD_TERMINAL		0xadadadad
+
+/* UMAC JMP address */
+#define UMAC_MU_FW_INST_DATA_12_ADDR    0xBF0000
+
+/* iwm_umac_hdi_out_hdr.cmd OP code -- bits [3:0] */
+#define UMAC_HDI_OUT_CMD_OPCODE_POS	0
+#define UMAC_HDI_OUT_CMD_OPCODE_SEED	0xF
+
+/* iwm_umac_hdi_out_hdr.cmd End-Of-Transfer -- bits [10:10] */
+#define UMAC_HDI_OUT_CMD_EOT_POS	10
+#define UMAC_HDI_OUT_CMD_EOT_SEED	0x1
+
+/* iwm_umac_hdi_out_hdr.cmd UTFD only usage -- bits [11:11] */
+#define UMAC_HDI_OUT_CMD_UTFD_ONLY_POS	11
+#define UMAC_HDI_OUT_CMD_UTFD_ONLY_SEED	0x1
+
+/* iwm_umac_hdi_out_hdr.cmd Non-WiFi HW sequence number -- bits [12:15] */
+#define UDMA_HDI_OUT_CMD_NON_WIFI_HW_SEQ_NUM_POS   12
+#define UDMA_HDI_OUT_CMD_NON_WIFI_HW_SEQ_NUM_SEED  0xF
+
+/* iwm_umac_hdi_out_hdr.cmd Signature -- bits [31:16] */
+#define UMAC_HDI_OUT_CMD_SIGNATURE_POS	16
+#define UMAC_HDI_OUT_CMD_SIGNATURE_SEED	0xFFFF
+
+/* iwm_umac_hdi_out_hdr.meta_data Byte count -- bits [11:0] */
+#define UMAC_HDI_OUT_BYTE_COUNT_POS	0
+#define UMAC_HDI_OUT_BYTE_COUNT_SEED	0xFFF
+
+/* iwm_umac_hdi_out_hdr.meta_data Credit group -- bits [15:12] */
+#define UMAC_HDI_OUT_CREDIT_GRP_POS	12
+#define UMAC_HDI_OUT_CREDIT_GRP_SEED	0xF
+
+/* iwm_umac_hdi_out_hdr.meta_data RA/TID -- bits [23:16] */
+#define UMAC_HDI_OUT_RATID_POS		16
+#define UMAC_HDI_OUT_RATID_SEED		0xFF
+
+/* iwm_umac_hdi_out_hdr.meta_data LMAC offset -- bits [31:24] */
+#define UMAC_HDI_OUT_LMAC_OFFSET_POS	24
+#define UMAC_HDI_OUT_LMAC_OFFSET_SEED	0xFF
+
+/* Signature */
+#define UMAC_HDI_OUT_SIGNATURE		0xCBBC
+
+/* buffer alignment */
+#define UMAC_HDI_BUF_ALIGN_MSK		0xF
+
+/*  iwm_umac_hdi_in_hdr.cmd OP code -- bits [3:0] */
+#define UMAC_HDI_IN_CMD_OPCODE_POS                0
+#define UMAC_HDI_IN_CMD_OPCODE_SEED               0xF
+
+/*  iwm_umac_hdi_in_hdr.cmd Non-WiFi API response -- bits [6:4] */
+#define UMAC_HDI_IN_CMD_NON_WIFI_RESP_POS         4
+#define UMAC_HDI_IN_CMD_NON_WIFI_RESP_SEED        0x7
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi API source -- bits [5:4] */
+#define UMAC_HDI_IN_CMD_SOURCE_POS                4
+#define UMAC_HDI_IN_CMD_SOURCE_SEED               0x3
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi API EOT -- bits [6:6] */
+#define UMAC_HDI_IN_CMD_EOT_POS                   6
+#define UMAC_HDI_IN_CMD_EOT_SEED                  0x1
+
+/* iwm_umac_hdi_in_hdr.cmd timestamp present -- bits [7:7] */
+#define UMAC_HDI_IN_CMD_TIME_STAMP_PRESENT_POS    7
+#define UMAC_HDI_IN_CMD_TIME_STAMP_PRESENT_SEED   0x1
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi Non-last AMSDU -- bits [8:8] */
+#define UMAC_HDI_IN_CMD_NON_LAST_AMSDU_POS        8
+#define UMAC_HDI_IN_CMD_NON_LAST_AMSDU_SEED       0x1
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi HW sequence number -- bits [31:9] */
+#define UMAC_HDI_IN_CMD_HW_SEQ_NUM_POS            9
+#define UMAC_HDI_IN_CMD_HW_SEQ_NUM_SEED           0x7FFFFF
+
+/* iwm_umac_hdi_in_hdr.cmd Non-WiFi HW sequence number -- bits [12:15] */
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SEQ_NUM_POS   12
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SEQ_NUM_SEED  0xF
+
+/* iwm_umac_hdi_in_hdr.cmd Non-WiFi HW signature -- bits [16:31] */
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG_POS       16
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG_SEED      0xFFFF
+
+/* Fixed Non-WiFi signature */
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG           0xCBBC
+
+/* IN NTFY op-codes */
+#define UMAC_NOTIFY_OPCODE_ALIVE		0xA1
+#define UMAC_NOTIFY_OPCODE_INIT_COMPLETE	0xA2
+#define UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS	0xA3
+#define UMAC_NOTIFY_OPCODE_ERROR		0xA4
+#define UMAC_NOTIFY_OPCODE_DEBUG		0xA5
+#define UMAC_NOTIFY_OPCODE_WIFI_IF_WRAPPER	0xB0
+#define UMAC_NOTIFY_OPCODE_STATS		0xB1
+#define UMAC_NOTIFY_OPCODE_PAGE_DEALLOC		0xB3
+#define UMAC_NOTIFY_OPCODE_RX_TICKET		0xB4
+#define UMAC_NOTIFY_OPCODE_MAX		        (UMAC_NOTIFY_OPCODE_RX_TICKET -\
+						UMAC_NOTIFY_OPCODE_ALIVE + 1)
+#define UMAC_NOTIFY_OPCODE_FIRST		(UMAC_NOTIFY_OPCODE_ALIVE)
+
+/* HDI OUT OP CODE */
+#define UMAC_HDI_OUT_OPCODE_PING		0x0
+#define UMAC_HDI_OUT_OPCODE_READ		0x1
+#define UMAC_HDI_OUT_OPCODE_WRITE		0x2
+#define UMAC_HDI_OUT_OPCODE_JUMP		0x3
+#define UMAC_HDI_OUT_OPCODE_REBOOT		0x4
+#define UMAC_HDI_OUT_OPCODE_WRITE_PERSISTENT	0x5
+#define UMAC_HDI_OUT_OPCODE_READ_PERSISTENT	0x6
+#define UMAC_HDI_OUT_OPCODE_READ_MODIFY_WRITE	0x7
+/* #define UMAC_HDI_OUT_OPCODE_RESERVED		0x8..0xA */
+#define UMAC_HDI_OUT_OPCODE_WRITE_AUX_REG	0xB
+#define UMAC_HDI_OUT_OPCODE_WIFI		0xF
+
+/* HDI IN OP CODE -- Non WiFi*/
+#define UMAC_HDI_IN_OPCODE_PING			0x0
+#define UMAC_HDI_IN_OPCODE_READ			0x1
+#define UMAC_HDI_IN_OPCODE_WRITE		0x2
+#define UMAC_HDI_IN_OPCODE_WRITE_PERSISTENT	0x5
+#define UMAC_HDI_IN_OPCODE_READ_PERSISTENT	0x6
+#define UMAC_HDI_IN_OPCODE_READ_MODIFY_WRITE	0x7
+#define UMAC_HDI_IN_OPCODE_EP_MGMT		0x8
+#define UMAC_HDI_IN_OPCODE_CREDIT_CHANGE	0x9
+#define UMAC_HDI_IN_OPCODE_CTRL_DATABASE	0xA
+#define UMAC_HDI_IN_OPCODE_WRITE_AUX_REG	0xB
+#define UMAC_HDI_IN_OPCODE_NONWIFI_MAX \
+		(UMAC_HDI_IN_OPCODE_WRITE_AUX_REG + 1)
+#define UMAC_HDI_IN_OPCODE_WIFI			0xF
+
+/* HDI IN SOURCE */
+#define UMAC_HDI_IN_SOURCE_FHRX			0x0
+#define UMAC_HDI_IN_SOURCE_UDMA			0x1
+#define UMAC_HDI_IN_SOURCE_FW			0x2
+#define UMAC_HDI_IN_SOURCE_RESERVED		0x3
+
+/* OUT CMD op-codes */
+#define UMAC_CMD_OPCODE_ECHO                    0x01
+#define UMAC_CMD_OPCODE_HALT                    0x02
+#define UMAC_CMD_OPCODE_RESET                   0x03
+#define UMAC_CMD_OPCODE_BULK_EP_INACT_TIMEOUT   0x09
+#define UMAC_CMD_OPCODE_URB_CANCEL_ACK          0x0A
+#define UMAC_CMD_OPCODE_DCACHE_FLUSH            0x0B
+#define UMAC_CMD_OPCODE_EEPROM_PROXY            0x0C
+#define UMAC_CMD_OPCODE_TX_ECHO                 0x0D
+#define UMAC_CMD_OPCODE_DBG_MON                 0x0E
+#define UMAC_CMD_OPCODE_INTERNAL_TX             0x0F
+#define UMAC_CMD_OPCODE_SET_PARAM_FIX           0x10
+#define UMAC_CMD_OPCODE_SET_PARAM_VAR           0x11
+#define UMAC_CMD_OPCODE_GET_PARAM               0x12
+#define UMAC_CMD_OPCODE_DBG_EVENT_WRAPPER       0x13
+#define UMAC_CMD_OPCODE_TARGET                  0x14
+#define UMAC_CMD_OPCODE_STATISTIC_REQUEST       0x15
+#define UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST	0x16
+#define UMAC_CMD_OPCODE_SET_PARAM_LIST		0x17
+#define UMAC_CMD_OPCODE_GET_PARAM_LIST		0x18
+#define UMAC_CMD_OPCODE_BASE_WRAPPER            0xFA
+#define UMAC_CMD_OPCODE_LMAC_WRAPPER            0xFB
+#define UMAC_CMD_OPCODE_HW_TEST_WRAPPER         0xFC
+#define UMAC_CMD_OPCODE_WIFI_IF_WRAPPER         0xFD
+#define UMAC_CMD_OPCODE_WIFI_WRAPPER            0xFE
+#define UMAC_CMD_OPCODE_WIFI_PASS_THROUGH       0xFF
+
+/* UMAC WiFi interface op-codes */
+#define UMAC_WIFI_IF_CMD_SET_PROFILE                     0x11
+#define UMAC_WIFI_IF_CMD_INVALIDATE_PROFILE              0x12
+#define UMAC_WIFI_IF_CMD_SET_EXCLUDE_LIST                0x13
+#define UMAC_WIFI_IF_CMD_SCAN_REQUEST                    0x14
+#define UMAC_WIFI_IF_CMD_SCAN_CONFIG                     0x15
+#define UMAC_WIFI_IF_CMD_ADD_WEP40_KEY                   0x16
+#define UMAC_WIFI_IF_CMD_ADD_WEP104_KEY                  0x17
+#define UMAC_WIFI_IF_CMD_ADD_TKIP_KEY                    0x18
+#define UMAC_WIFI_IF_CMD_ADD_CCMP_KEY                    0x19
+#define UMAC_WIFI_IF_CMD_REMOVE_KEY                      0x1A
+#define UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID                0x1B
+#define UMAC_WIFI_IF_CMD_SET_HOST_EXTENDED_IE            0x1C
+#define UMAC_WIFI_IF_CMD_GET_SUPPORTED_CHANNELS          0x1E
+#define UMAC_WIFI_IF_CMD_TX_PWR_TRIGGER                  0x20
+
+/* UMAC WiFi interface ports */
+#define UMAC_WIFI_IF_FLG_PORT_DEF                        0x00
+#define UMAC_WIFI_IF_FLG_PORT_PAN                        0x01
+#define UMAC_WIFI_IF_FLG_PORT_PAN_INVALID                WIFI_IF_FLG_PORT_DEF
+
+/* UMAC WiFi interface actions */
+#define UMAC_WIFI_IF_FLG_ACT_GET                         0x10
+#define UMAC_WIFI_IF_FLG_ACT_SET                         0x20
+
+/* iwm_umac_fw_cmd_hdr.meta_data byte count -- bits [11:0] */
+#define UMAC_FW_CMD_BYTE_COUNT_POS            0
+#define UMAC_FW_CMD_BYTE_COUNT_SEED           0xFFF
+
+/* iwm_umac_fw_cmd_hdr.meta_data status -- bits [15:12] */
+#define UMAC_FW_CMD_STATUS_POS                12
+#define UMAC_FW_CMD_STATUS_SEED               0xF
+
+/* iwm_umac_fw_cmd_hdr.meta_data full TX command by Driver -- bits [16:16] */
+#define UMAC_FW_CMD_TX_DRV_FULL_CMD_POS       16
+#define UMAC_FW_CMD_TX_DRV_FULL_CMD_SEED      0x1
+
+/* iwm_umac_fw_cmd_hdr.meta_data TX command by FW -- bits [17:17] */
+#define UMAC_FW_CMD_TX_FW_CMD_POS             17
+#define UMAC_FW_CMD_TX_FW_CMD_SEED            0x1
+
+/* iwm_umac_fw_cmd_hdr.meta_data TX plaintext mode -- bits [18:18] */
+#define UMAC_FW_CMD_TX_PLAINTEXT_POS          18
+#define UMAC_FW_CMD_TX_PLAINTEXT_SEED         0x1
+
+/* iwm_umac_fw_cmd_hdr.meta_data STA color -- bits [22:20] */
+#define UMAC_FW_CMD_TX_STA_COLOR_POS          20
+#define UMAC_FW_CMD_TX_STA_COLOR_SEED         0x7
+
+/* iwm_umac_fw_cmd_hdr.meta_data TX life time (TU) -- bits [31:24] */
+#define UMAC_FW_CMD_TX_LIFETIME_TU_POS        24
+#define UMAC_FW_CMD_TX_LIFETIME_TU_SEED       0xFF
+
+/* iwm_dev_cmd_hdr.flags Response required -- bits [5:5] */
+#define UMAC_DEV_CMD_FLAGS_RESP_REQ_POS		5
+#define UMAC_DEV_CMD_FLAGS_RESP_REQ_SEED	0x1
+
+/* iwm_dev_cmd_hdr.flags Aborted command -- bits [6:6] */
+#define UMAC_DEV_CMD_FLAGS_ABORT_POS		6
+#define UMAC_DEV_CMD_FLAGS_ABORT_SEED		0x1
+
+/* iwm_dev_cmd_hdr.flags Internal command -- bits [7:7] */
+#define DEV_CMD_FLAGS_FLD_INTERNAL_POS		7
+#define DEV_CMD_FLAGS_FLD_INTERNAL_SEED		0x1
+
+/* Rx */
+/* Rx actions */
+#define IWM_RX_TICKET_DROP           0x0
+#define IWM_RX_TICKET_RELEASE        0x1
+#define IWM_RX_TICKET_SNIFFER        0x2
+#define IWM_RX_TICKET_ENQUEUE        0x3
+
+/* Rx flags */
+#define IWM_RX_TICKET_PAD_SIZE_MSK        0x2
+#define IWM_RX_TICKET_SPECIAL_SNAP_MSK    0x4
+#define IWM_RX_TICKET_AMSDU_MSK           0x8
+#define IWM_RX_TICKET_DROP_REASON_POS       4
+#define IWM_RX_TICKET_DROP_REASON_MSK (0x1F << RX_TICKET_FLAGS_DROP_REASON_POS)
+
+#define IWM_RX_DROP_NO_DROP                          0x0
+#define IWM_RX_DROP_BAD_CRC                          0x1
+/* L2P no address match */
+#define IWM_RX_DROP_LMAC_ADDR_FILTER                 0x2
+/* Multicast address not in list */
+#define IWM_RX_DROP_MCAST_ADDR_FILTER                0x3
+/* Control frames are not sent to the driver */
+#define IWM_RX_DROP_CTL_FRAME                        0x4
+/* Our frame is back */
+#define IWM_RX_DROP_OUR_TX                           0x5
+/* Association class filtering */
+#define IWM_RX_DROP_CLASS_FILTER                     0x6
+/* Duplicated frame */
+#define IWM_RX_DROP_DUPLICATE_FILTER                 0x7
+/* Decryption error */
+#define IWM_RX_DROP_SEC_ERR                          0x8
+/* Unencrypted frame while encryption is on */
+#define IWM_RX_DROP_SEC_NO_ENCRYPTION                0x9
+/* Replay check failure */
+#define IWM_RX_DROP_SEC_REPLAY_ERR                   0xa
+/* uCode and FW key color mismatch, check before replay */
+#define IWM_RX_DROP_SEC_KEY_COLOR_MISMATCH           0xb
+#define IWM_RX_DROP_SEC_TKIP_COUNTER_MEASURE         0xc
+/* No fragmentations Db is found */
+#define IWM_RX_DROP_FRAG_NO_RESOURCE                 0xd
+/* Fragmention Db has seqCtl mismatch Vs. non-1st frag */
+#define IWM_RX_DROP_FRAG_ERR                         0xe
+#define IWM_RX_DROP_FRAG_LOST                        0xf
+#define IWM_RX_DROP_FRAG_COMPLETE                    0x10
+/* Should be handled by UMAC */
+#define IWM_RX_DROP_MANAGEMENT                       0x11
+/* STA not found by UMAC */
+#define IWM_RX_DROP_NO_STATION                       0x12
+/* NULL or QoS NULL */
+#define IWM_RX_DROP_NULL_DATA                        0x13
+#define IWM_RX_DROP_BA_REORDER_OLD_SEQCTL            0x14
+#define IWM_RX_DROP_BA_REORDER_DUPLICATE             0x15
+
+struct iwm_rx_ticket {
+	__le16 action;
+	__le16 id;
+	__le16 flags;
+	u8 payload_offset; /* includes: MAC header, pad, IV */
+	u8 tail_len; /* includes: MIC, ICV, CRC (w/o STATUS) */
+} __attribute__ ((packed));
+
+struct iwm_rx_mpdu_hdr {
+	__le16 len;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+/* UMAC SW WIFI API */
+
+struct iwm_dev_cmd_hdr {
+	u8 cmd;
+	u8 flags;
+	__le16 seq_num;
+} __attribute__ ((packed));
+
+struct iwm_umac_fw_cmd_hdr {
+	__le32 meta_data;
+	struct iwm_dev_cmd_hdr cmd;
+} __attribute__ ((packed));
+
+struct iwm_umac_wifi_out_hdr {
+	struct iwm_udma_out_wifi_hdr hw_hdr;
+	struct iwm_umac_fw_cmd_hdr sw_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_nonwifi_out_hdr {
+	struct iwm_udma_out_nonwifi_hdr hw_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_wifi_in_hdr {
+	struct iwm_udma_in_hdr hw_hdr;
+	struct iwm_umac_fw_cmd_hdr sw_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_nonwifi_in_hdr {
+	struct iwm_udma_in_hdr hw_hdr;
+	__le32 time_stamp;
+} __attribute__ ((packed));
+
+#define IWM_UMAC_PAGE_SIZE	0x200
+
+/* Notify structures */
+struct iwm_fw_version {
+	u8 minor;
+	u8 major;
+	__le16 id;
+};
+
+struct iwm_fw_build {
+	u8 type;
+	u8 subtype;
+	u8 platform;
+	u8 opt;
+};
+
+struct iwm_fw_alive_hdr {
+	struct iwm_fw_version ver;
+	struct iwm_fw_build build;
+	__le32 os_build;
+	__le32 log_hdr_addr;
+	__le32 log_buf_addr;
+	__le32 sys_timer_addr;
+};
+
+#define WAIT_NOTIF_TIMEOUT     (2 * HZ)
+#define SCAN_COMPLETE_TIMEOUT  (3 * HZ)
+
+#define UMAC_NTFY_ALIVE_STATUS_ERR		0xDEAD
+#define UMAC_NTFY_ALIVE_STATUS_OK		0xCAFE
+
+#define UMAC_NTFY_INIT_COMPLETE_STATUS_ERR	0xDEAD
+#define UMAC_NTFY_INIT_COMPLETE_STATUS_OK	0xCAFE
+
+#define UMAC_NTFY_WIFI_CORE_STATUS_LINK_EN      0x40
+#define UMAC_NTFY_WIFI_CORE_STATUS_MLME_EN      0x80
+
+#define IWM_MACS_OUT_GROUPS	6
+#define IWM_MACS_OUT_SGROUPS	1
+
+
+#define WIFI_IF_NTFY_ASSOC_START			0x80
+#define WIFI_IF_NTFY_ASSOC_COMPLETE			0x81
+#define WIFI_IF_NTFY_PROFILE_INVALIDATE_COMPLETE	0x82
+#define WIFI_IF_NTFY_CONNECTION_TERMINATED		0x83
+#define WIFI_IF_NTFY_SCAN_COMPLETE			0x84
+#define WIFI_IF_NTFY_STA_TABLE_CHANGE			0x85
+#define WIFI_IF_NTFY_EXTENDED_IE_REQUIRED		0x86
+#define WIFI_IF_NTFY_RADIO_PREEMPTION			0x87
+#define WIFI_IF_NTFY_BSS_TRK_TABLE_CHANGED		0x88
+#define WIFI_IF_NTFY_BSS_TRK_ENTRIES_REMOVED		0x89
+#define WIFI_IF_NTFY_LINK_QUALITY_STATISTICS		0x8A
+#define WIFI_IF_NTFY_MGMT_FRAME				0x8B
+
+/* DEBUG INDICATIONS */
+#define WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_START		0xE0
+#define WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_COMPLETE	0xE1
+#define WIFI_DBG_IF_NTFY_SCAN_CHANNEL_START		0xE2
+#define WIFI_DBG_IF_NTFY_SCAN_CHANNEL_RESULT		0xE3
+#define WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_START		0xE4
+#define WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_COMPLETE		0xE5
+#define WIFI_DBG_IF_NTFY_CNCT_ATC_START			0xE6
+#define WIFI_DBG_IF_NTFY_COEX_NOTIFICATION		0xE7
+#define WIFI_DBG_IF_NTFY_COEX_HANDLE_ENVELOP		0xE8
+#define WIFI_DBG_IF_NTFY_COEX_HANDLE_RELEASE_ENVELOP	0xE9
+
+/* Notification structures */
+struct iwm_umac_notif_wifi_if {
+	struct iwm_umac_wifi_in_hdr hdr;
+	u8 status;
+	u8 flags;
+	__le16 buf_size;
+} __attribute__ ((packed));
+
+#define UMAC_ROAM_REASON_FIRST_SELECTION	0x1
+#define UMAC_ROAM_REASON_AP_DEAUTH		0x2
+#define UMAC_ROAM_REASON_AP_CONNECT_LOST	0x3
+#define UMAC_ROAM_REASON_RSSI			0x4
+#define UMAC_ROAM_REASON_AP_ASSISTED_ROAM	0x5
+#define UMAC_ROAM_REASON_IBSS_COALESCING	0x6
+
+struct iwm_umac_notif_assoc_start {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 roam_reason;
+	u8 bssid[ETH_ALEN];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+#define UMAC_ASSOC_COMPLETE_SUCCESS		0x0
+#define UMAC_ASSOC_COMPLETE_FAILURE		0x1
+
+struct iwm_umac_notif_assoc_complete {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 status;
+	u8 bssid[ETH_ALEN];
+	u8 band;
+	u8 channel;
+} __attribute__ ((packed));
+
+#define UMAC_PROFILE_INVALID_ASSOC_TIMEOUT	0x0
+#define UMAC_PROFILE_INVALID_ROAM_TIMEOUT	0x1
+#define UMAC_PROFILE_INVALID_REQUEST		0x2
+#define UMAC_PROFILE_INVALID_RF_PREEMPTED	0x3
+
+struct iwm_umac_notif_profile_invalidate {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 reason;
+} __attribute__ ((packed));
+
+#define UMAC_SCAN_RESULT_SUCCESS  0x0
+#define UMAC_SCAN_RESULT_ABORTED  0x1
+#define UMAC_SCAN_RESULT_REJECTED 0x2
+#define UMAC_SCAN_RESULT_FAILED   0x3
+
+struct iwm_umac_notif_scan_complete {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 type;
+	__le32 result;
+	u8 seq_num;
+} __attribute__ ((packed));
+
+#define UMAC_OPCODE_ADD_MODIFY	0x0
+#define UMAC_OPCODE_REMOVE	0x1
+#define UMAC_OPCODE_CLEAR_ALL	0x2
+
+#define UMAC_STA_FLAG_QOS	0x1
+
+struct iwm_umac_notif_sta_info {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 opcode;
+	u8 mac_addr[ETH_ALEN];
+	u8 sta_id; /* bits 0-3: station ID, bits 4-7: station color */
+	u8 flags;
+} __attribute__ ((packed));
+
+#define UMAC_BAND_2GHZ 0
+#define UMAC_BAND_5GHZ 1
+
+#define UMAC_CHANNEL_WIDTH_20MHZ 0
+#define UMAC_CHANNEL_WIDTH_40MHZ 1
+
+struct iwm_umac_notif_bss_info {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 type;
+	__le32 timestamp;
+	__le16 table_idx;
+	__le16 frame_len;
+	u8 band;
+	u8 channel;
+	s8 rssi;
+	u8 reserved;
+	u8 frame_buf[1];
+} __attribute__ ((packed));
+
+#define IWM_BSS_REMOVE_INDEX_MSK           0x0fff
+#define IWM_BSS_REMOVE_FLAGS_MSK           0xfc00
+
+#define IWM_BSS_REMOVE_FLG_AGE             0x1000
+#define IWM_BSS_REMOVE_FLG_TIMEOUT         0x2000
+#define IWM_BSS_REMOVE_FLG_TABLE_FULL      0x4000
+
+struct iwm_umac_notif_bss_removed {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 count;
+	__le16 entries[0];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_mgt_frame {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le16 len;
+	u8 frame[1];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_alive {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le16 status;
+	__le16 reserved1;
+	struct iwm_fw_alive_hdr alive_data;
+	__le16 reserved2;
+	__le16 page_grp_count;
+	__le32 page_grp_state[IWM_MACS_OUT_GROUPS];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_init_complete {
+	__le16 status;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+/* error categories */
+enum {
+	UMAC_SYS_ERR_CAT_NONE = 0,
+	UMAC_SYS_ERR_CAT_BOOT,
+	UMAC_SYS_ERR_CAT_UMAC,
+	UMAC_SYS_ERR_CAT_UAXM,
+	UMAC_SYS_ERR_CAT_LMAC,
+	UMAC_SYS_ERR_CAT_MAX
+};
+
+struct iwm_fw_error_hdr {
+	__le32 category;
+	__le32 status;
+	__le32 pc;
+	__le32 blink1;
+	__le32 blink2;
+	__le32 ilink1;
+	__le32 ilink2;
+	__le32 data1;
+	__le32 data2;
+	__le32 line_num;
+	__le32 umac_status;
+	__le32 lmac_status;
+	__le32 sdio_status;
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_error {
+	struct iwm_umac_wifi_in_hdr hdr;
+	struct iwm_fw_error_hdr err;
+} __attribute__ ((packed));
+
+#define UMAC_DEALLOC_NTFY_CHANGES_CNT_POS	0
+#define UMAC_DEALLOC_NTFY_CHANGES_CNT_SEED	0xff
+#define UMAC_DEALLOC_NTFY_CHANGES_MSK_POS	8
+#define UMAC_DEALLOC_NTFY_CHANGES_MSK_SEED	0xffffff
+#define UMAC_DEALLOC_NTFY_PAGE_CNT_POS		0
+#define UMAC_DEALLOC_NTFY_PAGE_CNT_SEED		0xffffff
+#define UMAC_DEALLOC_NTFY_GROUP_NUM_POS		24
+#define UMAC_DEALLOC_NTFY_GROUP_NUM_SEED	0xf
+
+struct iwm_umac_notif_page_dealloc {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le32 changes;
+	__le32 grp_info[IWM_MACS_OUT_GROUPS];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_wifi_status {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le16 status;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_rx_ticket {
+	struct iwm_umac_wifi_in_hdr hdr;
+	u8 num_tickets;
+	u8 reserved[3];
+	struct iwm_rx_ticket tickets[1];
+} __attribute__ ((packed));
+
+/* Tx/Rx rates window (number of max of last update window per second) */
+#define UMAC_NTF_RATE_SAMPLE_NR	4
+
+#define IWM_UMAC_MGMT_TID	8
+#define IWM_UMAC_TID_NR		8
+
+struct iwm_umac_notif_stats {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le32 flags;
+	__le32 timestamp;
+	__le16 tid_load[IWM_UMAC_TID_NR + 2]; /* 1 non-QoS + 1 dword align */
+	__le16 tx_rate[UMAC_NTF_RATE_SAMPLE_NR];
+	__le16 rx_rate[UMAC_NTF_RATE_SAMPLE_NR];
+	s32 rssi_dbm;
+	s32 noise_dbm;
+	__le32 supp_rates;
+	__le32 missed_beacons;
+	__le32 rx_beacons;
+	__le32 rx_dir_pkts;
+	__le32 rx_nondir_pkts;
+	__le32 rx_multicast;
+	__le32 rx_errors;
+	__le32 rx_drop_other_bssid;
+	__le32 rx_drop_decode;
+	__le32 rx_drop_reassembly;
+	__le32 rx_drop_bad_len;
+	__le32 rx_drop_overflow;
+	__le32 rx_drop_crc;
+	__le32 rx_drop_missed;
+	__le32 tx_dir_pkts;
+	__le32 tx_nondir_pkts;
+	__le32 tx_failure;
+	__le32 tx_errors;
+	__le32 tx_drop_max_retry;
+	__le32 tx_err_abort;
+	__le32 tx_err_carrier;
+	__le32 rx_bytes;
+	__le32 tx_bytes;
+	__le32 tx_power;
+	__le32 tx_max_power;
+	__le32 roam_threshold;
+	__le32 ap_assoc_nr;
+	__le32 scan_full;
+	__le32 scan_abort;
+	__le32 ap_nr;
+	__le32 roam_nr;
+	__le32 roam_missed_beacons;
+	__le32 roam_rssi;
+	__le32 roam_unassoc;
+	__le32 roam_deauth;
+	__le32 roam_ap_loadblance;
+} __attribute__ ((packed));
+
+/* WiFi interface wrapper header */
+struct iwm_umac_wifi_if {
+	u8 oid;
+	u8 flags;
+	__le16 buf_size;
+} __attribute__ ((packed));
+
+#define IWM_SEQ_NUM_HOST_MSK	0x0000
+#define IWM_SEQ_NUM_UMAC_MSK	0x4000
+#define IWM_SEQ_NUM_LMAC_MSK	0x8000
+#define IWM_SEQ_NUM_MSK		0xC000
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/wext.c b/drivers/net/wireless/iwmc3200wifi/wext.c
new file mode 100644
index 00000000000..584c94d0f39
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/wext.c
@@ -0,0 +1,723 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <net/cfg80211.h>
+#include <net/iw_handler.h>
+
+#include "iwm.h"
+#include "umac.h"
+#include "commands.h"
+#include "debug.h"
+
+static struct iw_statistics *iwm_get_wireless_stats(struct net_device *dev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	struct iw_statistics *wstats = &iwm->wstats;
+
+	if (!test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+		memset(wstats, 0, sizeof(struct iw_statistics));
+		wstats->qual.updated = IW_QUAL_ALL_INVALID;
+	}
+
+	return wstats;
+}
+
+static int iwm_wext_siwfreq(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_freq *freq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (freq->flags == IW_FREQ_AUTO)
+		return 0;
+
+	/* frequency/channel can only be set in IBSS mode */
+	if (iwm->conf.mode != UMAC_MODE_IBSS)
+		return -EOPNOTSUPP;
+
+	return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
+}
+
+static int iwm_wext_giwfreq(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_freq *freq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
+
+	freq->e = 0;
+	freq->m = iwm->channel;
+
+	return 0;
+}
+
+static int iwm_wext_siwap(struct net_device *dev, struct iw_request_info *info,
+			  struct sockaddr *ap_addr, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	if (is_zero_ether_addr(ap_addr->sa_data) ||
+	    is_broadcast_ether_addr(ap_addr->sa_data)) {
+		IWM_DBG_WEXT(iwm, DBG, "clear mandatory bssid %pM\n",
+			     iwm->umac_profile->bssid[0]);
+		memset(&iwm->umac_profile->bssid[0], 0, ETH_ALEN);
+		iwm->umac_profile->bss_num = 0;
+	} else {
+		IWM_DBG_WEXT(iwm, DBG, "add mandatory bssid %pM\n",
+			     ap_addr->sa_data);
+		memcpy(&iwm->umac_profile->bssid[0], ap_addr->sa_data,
+		       ETH_ALEN);
+		iwm->umac_profile->bss_num = 1;
+	}
+
+	if (iwm->umac_profile_active) {
+		if (!memcmp(&iwm->umac_profile->bssid[0], iwm->bssid, ETH_ALEN))
+			return 0;
+
+		iwm_invalidate_mlme_profile(iwm);
+	}
+
+	if (iwm->umac_profile->ssid.ssid_len)
+		return iwm_send_mlme_profile(iwm);
+
+	return 0;
+}
+
+static int iwm_wext_giwap(struct net_device *dev, struct iw_request_info *info,
+			  struct sockaddr *ap_addr, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	switch (iwm->conf.mode) {
+	case UMAC_MODE_IBSS:
+		return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
+	case UMAC_MODE_BSS:
+		if (test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+			ap_addr->sa_family = ARPHRD_ETHER;
+			memcpy(&ap_addr->sa_data, iwm->bssid, ETH_ALEN);
+		} else
+			memset(&ap_addr->sa_data, 0, ETH_ALEN);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_wext_siwessid(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *data, char *ssid)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	size_t len = data->length;
+	int ret;
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	if (len > 0 && ssid[len - 1] == '\0')
+		len--;
+
+	if (iwm->umac_profile_active) {
+		if (iwm->umac_profile->ssid.ssid_len == len &&
+		    !memcmp(iwm->umac_profile->ssid.ssid, ssid, len))
+			return 0;
+
+		ret = iwm_invalidate_mlme_profile(iwm);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't invalidate profile\n");
+			return ret;
+		}
+	}
+
+	iwm->umac_profile->ssid.ssid_len = len;
+	memcpy(iwm->umac_profile->ssid.ssid, ssid, len);
+
+	return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_wext_giwessid(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *data, char *ssid)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	data->length = iwm->umac_profile->ssid.ssid_len;
+	if (data->length) {
+		memcpy(ssid, iwm->umac_profile->ssid.ssid, data->length);
+		data->flags = 1;
+	} else
+		data->flags = 0;
+
+	return 0;
+}
+
+static struct iwm_key *
+iwm_key_init(struct iwm_priv *iwm, u8 key_idx, bool in_use,
+	     struct iw_encode_ext *ext, u8 alg)
+{
+	struct iwm_key *key = &iwm->keys[key_idx];
+
+	memset(key, 0, sizeof(struct iwm_key));
+	memcpy(key->hdr.mac, ext->addr.sa_data, ETH_ALEN);
+	key->hdr.key_idx = key_idx;
+	if (is_broadcast_ether_addr(ext->addr.sa_data))
+		key->hdr.multicast = 1;
+
+	key->in_use = in_use;
+	key->flags = ext->ext_flags;
+	key->alg = alg;
+	key->key_len = ext->key_len;
+	memcpy(key->key, ext->key, ext->key_len);
+
+	return key;
+}
+
+static int iwm_wext_giwrate(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_param *rate, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	rate->value = iwm->rate * 1000000;
+
+	return 0;
+}
+
+static int iwm_wext_siwencode(struct net_device *dev,
+			      struct iw_request_info *info,
+			      struct iw_point *erq, char *key_buf)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	struct iwm_key *uninitialized_var(key);
+	int idx, i, uninitialized_var(alg), remove = 0, ret;
+
+	IWM_DBG_WEXT(iwm, DBG, "key len: %d\n", erq->length);
+	IWM_DBG_WEXT(iwm, DBG, "flags: 0x%x\n", erq->flags);
+
+	if (!iwm->umac_profile) {
+		IWM_ERR(iwm, "UMAC profile not allocated yet\n");
+		return -ENODEV;
+	}
+
+	if (erq->length == WLAN_KEY_LEN_WEP40) {
+		alg = UMAC_CIPHER_TYPE_WEP_40;
+		iwm->umac_profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_WEP_40;
+		iwm->umac_profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_WEP_40;
+	} else if (erq->length == WLAN_KEY_LEN_WEP104) {
+		alg = UMAC_CIPHER_TYPE_WEP_104;
+		iwm->umac_profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_WEP_104;
+		iwm->umac_profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_WEP_104;
+	}
+
+	if (erq->flags & IW_ENCODE_RESTRICTED)
+		iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+	else
+		iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_OPEN;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx == 0) {
+		if (iwm->default_key)
+			for (i = 0; i < IWM_NUM_KEYS; i++) {
+				if (iwm->default_key == &iwm->keys[i]) {
+					idx = i;
+					break;
+				}
+			}
+		else
+			iwm->default_key = &iwm->keys[idx];
+	} else if (idx < 1 || idx > 4) {
+		return -EINVAL;
+	} else
+		idx--;
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = 1;
+	else if (erq->length == 0) {
+		if (!iwm->keys[idx].in_use)
+			return -EINVAL;
+		iwm->default_key = &iwm->keys[idx];
+	}
+
+	if (erq->length) {
+		key = &iwm->keys[idx];
+		memset(key, 0, sizeof(struct iwm_key));
+		memset(key->hdr.mac, 0xff, ETH_ALEN);
+		key->hdr.key_idx = idx;
+		key->hdr.multicast = 1;
+		key->in_use = !remove;
+		key->alg = alg;
+		key->key_len = erq->length;
+		memcpy(key->key, key_buf, erq->length);
+
+		IWM_DBG_WEXT(iwm, DBG, "Setting key %d, default: %d\n",
+			     idx, !!iwm->default_key);
+	}
+
+	if (remove) {
+		if ((erq->flags & IW_ENCODE_NOKEY) || (erq->length == 0)) {
+			int j;
+			for (j = 0; j < IWM_NUM_KEYS; j++)
+				if (iwm->keys[j].in_use) {
+					struct iwm_key *k = &iwm->keys[j];
+
+					k->in_use = 0;
+					ret = iwm_set_key(iwm, remove, 0, k);
+					if (ret < 0)
+						return ret;
+				}
+
+			iwm->umac_profile->sec.ucast_cipher =
+							UMAC_CIPHER_TYPE_NONE;
+			iwm->umac_profile->sec.mcast_cipher =
+							UMAC_CIPHER_TYPE_NONE;
+			iwm->umac_profile->sec.auth_type =
+							UMAC_AUTH_TYPE_OPEN;
+
+			return 0;
+		} else {
+			key->in_use = 0;
+			return iwm_set_key(iwm, remove, 0, key);
+		}
+	}
+
+	/*
+	 * If we havent set a profile yet, we cant set keys.
+	 * Keys will be pushed after we're associated.
+	 */
+	if (!iwm->umac_profile_active)
+		return 0;
+
+	/*
+	 * If there is a current active profile, but no
+	 * default key, it's not worth trying to associate again.
+	 */
+	if (!iwm->default_key)
+		return 0;
+
+	/*
+	 * Here we have an active profile, but a key setting changed.
+	 * We thus have to invalidate the current profile, and push the
+	 * new one. Keys will be pushed when association takes place.
+	 */
+	ret = iwm_invalidate_mlme_profile(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't invalidate profile\n");
+		return ret;
+	}
+
+	return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_wext_giwencode(struct net_device *dev,
+			      struct iw_request_info *info,
+			      struct iw_point *erq, char *key)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	int idx, i;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx < 1 || idx > 4) {
+		idx = -1;
+		if (!iwm->default_key) {
+			erq->length = 0;
+			erq->flags |= IW_ENCODE_NOKEY;
+			return 0;
+		} else
+			for (i = 0; i < IWM_NUM_KEYS; i++) {
+				if (iwm->default_key == &iwm->keys[i]) {
+					idx = i;
+					break;
+				}
+			}
+		if (idx < 0)
+			return -EINVAL;
+	} else
+		idx--;
+
+	erq->flags = idx + 1;
+
+	if (!iwm->keys[idx].in_use) {
+		erq->length = 0;
+		erq->flags |= IW_ENCODE_DISABLED;
+		return 0;
+	}
+
+	memcpy(key, iwm->keys[idx].key,
+	       min_t(int, erq->length, iwm->keys[idx].key_len));
+	erq->length = iwm->keys[idx].key_len;
+	erq->flags |= IW_ENCODE_ENABLED;
+
+	if (iwm->umac_profile->mode == UMAC_MODE_BSS) {
+		switch (iwm->umac_profile->sec.auth_type) {
+		case UMAC_AUTH_TYPE_OPEN:
+			erq->flags |= IW_ENCODE_OPEN;
+			break;
+		default:
+			erq->flags |= IW_ENCODE_RESTRICTED;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int iwm_set_wpa_version(struct iwm_priv *iwm, u8 wpa_version)
+{
+	if (wpa_version & IW_AUTH_WPA_VERSION_WPA2)
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_RSNA_ON_MSK;
+	else if (wpa_version & IW_AUTH_WPA_VERSION_WPA)
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WPA_ON_MSK;
+	else
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_LEGACY_PROFILE;
+
+	return 0;
+}
+
+static int iwm_wext_siwpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct iw_param *wrq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	u32 power_index;
+
+	if (wrq->disabled) {
+		power_index = IWM_POWER_INDEX_MIN;
+		goto set;
+	} else
+		power_index = IWM_POWER_INDEX_DEFAULT;
+
+	switch (wrq->flags & IW_POWER_MODE) {
+	case IW_POWER_ON:
+	case IW_POWER_MODE:
+	case IW_POWER_ALL_R:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+ set:
+	if (power_index == iwm->conf.power_index)
+		return 0;
+
+	iwm->conf.power_index = power_index;
+
+	return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				       CFG_POWER_INDEX, iwm->conf.power_index);
+}
+
+static int iwm_wext_giwpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	wrqu->power.disabled = (iwm->conf.power_index == IWM_POWER_INDEX_MIN);
+
+	return 0;
+}
+
+static int iwm_set_key_mgt(struct iwm_priv *iwm, u8 key_mgt)
+{
+	u8 *auth_type = &iwm->umac_profile->sec.auth_type;
+
+	if (key_mgt == IW_AUTH_KEY_MGMT_802_1X)
+		*auth_type = UMAC_AUTH_TYPE_8021X;
+	else if (key_mgt == IW_AUTH_KEY_MGMT_PSK) {
+		if (iwm->umac_profile->sec.flags &
+		    (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK))
+			*auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
+		else
+			*auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+	} else {
+		IWM_ERR(iwm, "Invalid key mgt: 0x%x\n", key_mgt);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int iwm_set_cipher(struct iwm_priv *iwm, u8 cipher, u8 ucast)
+{
+	u8 *profile_cipher = ucast ? &iwm->umac_profile->sec.ucast_cipher :
+		&iwm->umac_profile->sec.mcast_cipher;
+
+	switch (cipher) {
+	case IW_AUTH_CIPHER_NONE:
+		*profile_cipher = UMAC_CIPHER_TYPE_NONE;
+		break;
+	case IW_AUTH_CIPHER_WEP40:
+		*profile_cipher = UMAC_CIPHER_TYPE_WEP_40;
+		break;
+	case IW_AUTH_CIPHER_TKIP:
+		*profile_cipher = UMAC_CIPHER_TYPE_TKIP;
+		break;
+	case IW_AUTH_CIPHER_CCMP:
+		*profile_cipher = UMAC_CIPHER_TYPE_CCMP;
+		break;
+	case IW_AUTH_CIPHER_WEP104:
+		*profile_cipher = UMAC_CIPHER_TYPE_WEP_104;
+		break;
+	default:
+		IWM_ERR(iwm, "Unsupported cipher: 0x%x\n", cipher);
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_set_auth_alg(struct iwm_priv *iwm, u8 auth_alg)
+{
+	u8 *auth_type = &iwm->umac_profile->sec.auth_type;
+
+	switch (auth_alg) {
+	case IW_AUTH_ALG_OPEN_SYSTEM:
+		*auth_type = UMAC_AUTH_TYPE_OPEN;
+		break;
+	case IW_AUTH_ALG_SHARED_KEY:
+		if (iwm->umac_profile->sec.flags &
+		    (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK)) {
+			if (*auth_type == UMAC_AUTH_TYPE_8021X)
+				return -EINVAL;
+			*auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
+		} else {
+			*auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+		}
+		break;
+	case IW_AUTH_ALG_LEAP:
+	default:
+		IWM_ERR(iwm, "Unsupported auth alg: 0x%x\n", auth_alg);
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_wext_siwauth(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_param *data, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	int ret;
+
+	if ((data->flags) &
+	    (IW_AUTH_WPA_VERSION | IW_AUTH_KEY_MGMT |
+	     IW_AUTH_WPA_ENABLED | IW_AUTH_80211_AUTH_ALG)) {
+		/* We need to invalidate the current profile */
+		if (iwm->umac_profile_active) {
+			ret = iwm_invalidate_mlme_profile(iwm);
+			if (ret < 0) {
+				IWM_ERR(iwm, "Couldn't invalidate profile\n");
+				return ret;
+			}
+		}
+	}
+
+	switch (data->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		return iwm_set_wpa_version(iwm, data->value);
+		break;
+	case IW_AUTH_CIPHER_PAIRWISE:
+		return iwm_set_cipher(iwm, data->value, 1);
+		break;
+	case IW_AUTH_CIPHER_GROUP:
+		return iwm_set_cipher(iwm, data->value, 0);
+		break;
+	case IW_AUTH_KEY_MGMT:
+		return iwm_set_key_mgt(iwm, data->value);
+		break;
+	case IW_AUTH_80211_AUTH_ALG:
+		return iwm_set_auth_alg(iwm, data->value);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_wext_giwauth(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_param *data, char *extra)
+{
+	return 0;
+}
+
+static int iwm_wext_siwencodeext(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *erq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	struct iwm_key *key;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
+	int uninitialized_var(alg), idx, i, remove = 0;
+
+	IWM_DBG_WEXT(iwm, DBG, "alg: 0x%x\n", ext->alg);
+	IWM_DBG_WEXT(iwm, DBG, "key len: %d\n", ext->key_len);
+	IWM_DBG_WEXT(iwm, DBG, "ext_flags: 0x%x\n", ext->ext_flags);
+	IWM_DBG_WEXT(iwm, DBG, "flags: 0x%x\n", erq->flags);
+	IWM_DBG_WEXT(iwm, DBG, "length: 0x%x\n", erq->length);
+
+	switch (ext->alg) {
+	case IW_ENCODE_ALG_NONE:
+		remove = 1;
+		break;
+	case IW_ENCODE_ALG_WEP:
+		if (ext->key_len == WLAN_KEY_LEN_WEP40)
+			alg = UMAC_CIPHER_TYPE_WEP_40;
+		else if (ext->key_len == WLAN_KEY_LEN_WEP104)
+			alg = UMAC_CIPHER_TYPE_WEP_104;
+		else {
+			IWM_ERR(iwm, "Invalid key length: %d\n", ext->key_len);
+			return -EINVAL;
+		}
+
+		break;
+	case IW_ENCODE_ALG_TKIP:
+		alg = UMAC_CIPHER_TYPE_TKIP;
+		break;
+	case IW_ENCODE_ALG_CCMP:
+		alg = UMAC_CIPHER_TYPE_CCMP;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+
+	if (idx == 0) {
+		if (iwm->default_key)
+			for (i = 0; i < IWM_NUM_KEYS; i++) {
+				if (iwm->default_key == &iwm->keys[i]) {
+					idx = i;
+					break;
+				}
+			}
+	} else if (idx < 1 || idx > 4) {
+		return -EINVAL;
+	} else
+		idx--;
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = 1;
+	else if ((erq->length == 0) ||
+		 (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) {
+		iwm->default_key = &iwm->keys[idx];
+		if (iwm->umac_profile_active && ext->alg == IW_ENCODE_ALG_WEP)
+			return iwm_set_tx_key(iwm, idx);
+	}
+
+	key = iwm_key_init(iwm, idx, !remove, ext, alg);
+
+	return iwm_set_key(iwm, remove, !iwm->default_key, key);
+}
+
+static const iw_handler iwm_handlers[] =
+{
+	(iw_handler) NULL,				/* SIOCSIWCOMMIT */
+	(iw_handler) cfg80211_wext_giwname,		/* SIOCGIWNAME */
+	(iw_handler) NULL,				/* SIOCSIWNWID */
+	(iw_handler) NULL,				/* SIOCGIWNWID */
+	(iw_handler) iwm_wext_siwfreq,			/* SIOCSIWFREQ */
+	(iw_handler) iwm_wext_giwfreq,			/* SIOCGIWFREQ */
+	(iw_handler) cfg80211_wext_siwmode,		/* SIOCSIWMODE */
+	(iw_handler) cfg80211_wext_giwmode,		/* SIOCGIWMODE */
+	(iw_handler) NULL,				/* SIOCSIWSENS */
+	(iw_handler) NULL,				/* SIOCGIWSENS */
+	(iw_handler) NULL /* not used */,		/* SIOCSIWRANGE */
+	(iw_handler) cfg80211_wext_giwrange,		/* SIOCGIWRANGE */
+	(iw_handler) NULL /* not used */,		/* SIOCSIWPRIV */
+	(iw_handler) NULL /* kernel code */,		/* SIOCGIWPRIV */
+	(iw_handler) NULL /* not used */,		/* SIOCSIWSTATS */
+	(iw_handler) NULL /* kernel code */,		/* SIOCGIWSTATS */
+	(iw_handler) NULL,				/* SIOCSIWSPY */
+	(iw_handler) NULL,				/* SIOCGIWSPY */
+	(iw_handler) NULL,				/* SIOCSIWTHRSPY */
+	(iw_handler) NULL,				/* SIOCGIWTHRSPY */
+	(iw_handler) iwm_wext_siwap,	                /* SIOCSIWAP */
+	(iw_handler) iwm_wext_giwap,			/* SIOCGIWAP */
+	(iw_handler) NULL,			        /* SIOCSIWMLME */
+	(iw_handler) NULL,				/* SIOCGIWAPLIST */
+	(iw_handler) cfg80211_wext_siwscan,		/* SIOCSIWSCAN */
+	(iw_handler) cfg80211_wext_giwscan,		/* SIOCGIWSCAN */
+	(iw_handler) iwm_wext_siwessid,			/* SIOCSIWESSID */
+	(iw_handler) iwm_wext_giwessid,			/* SIOCGIWESSID */
+	(iw_handler) NULL,				/* SIOCSIWNICKN */
+	(iw_handler) NULL,				/* SIOCGIWNICKN */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* SIOCSIWRATE */
+	(iw_handler) iwm_wext_giwrate,			/* SIOCGIWRATE */
+	(iw_handler) cfg80211_wext_siwrts,		/* SIOCSIWRTS */
+	(iw_handler) cfg80211_wext_giwrts,		/* SIOCGIWRTS */
+	(iw_handler) cfg80211_wext_siwfrag,	        /* SIOCSIWFRAG */
+	(iw_handler) cfg80211_wext_giwfrag,		/* SIOCGIWFRAG */
+	(iw_handler) NULL,				/* SIOCSIWTXPOW */
+	(iw_handler) NULL,				/* SIOCGIWTXPOW */
+	(iw_handler) NULL,				/* SIOCSIWRETRY */
+	(iw_handler) NULL,				/* SIOCGIWRETRY */
+	(iw_handler) iwm_wext_siwencode,		/* SIOCSIWENCODE */
+	(iw_handler) iwm_wext_giwencode,		/* SIOCGIWENCODE */
+	(iw_handler) iwm_wext_siwpower,			/* SIOCSIWPOWER */
+	(iw_handler) iwm_wext_giwpower,			/* SIOCGIWPOWER */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,                              /* SIOCSIWGENIE */
+	(iw_handler) NULL,				/* SIOCGIWGENIE */
+	(iw_handler) iwm_wext_siwauth,			/* SIOCSIWAUTH */
+	(iw_handler) iwm_wext_giwauth,			/* SIOCGIWAUTH */
+	(iw_handler) iwm_wext_siwencodeext,	        /* SIOCSIWENCODEEXT */
+	(iw_handler) NULL,				/* SIOCGIWENCODEEXT */
+	(iw_handler) NULL,				/* SIOCSIWPMKSA */
+	(iw_handler) NULL,				/* -- hole -- */
+};
+
+const struct iw_handler_def iwm_iw_handler_def = {
+	.num_standard	= ARRAY_SIZE(iwm_handlers),
+	.standard	= (iw_handler *) iwm_handlers,
+	.get_wireless_stats = iwm_get_wireless_stats,
+};
+
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
index 4bc46a60ae2..9a5408e7d94 100644
--- a/drivers/net/wireless/libertas/11d.c
+++ b/drivers/net/wireless/libertas/11d.c
@@ -207,7 +207,7 @@ static int generate_domain_info_11d(struct parsed_region_chan_11d
 	lbs_deb_11d("nr_subband=%x\n", domaininfo->nr_subband);
 	lbs_deb_hex(LBS_DEB_11D, "domaininfo", (char *)domaininfo,
 		COUNTRY_CODE_LEN + 1 +
-		sizeof(struct ieeetypes_subbandset) * nr_subband);
+		sizeof(struct ieee_subbandset) * nr_subband);
 	return 0;
 }
 
@@ -302,11 +302,9 @@ done:
  *  @param parsed_region_chan   pointer to parsed_region_chan_11d
  *  @return 	                0
 */
-static int parse_domain_info_11d(struct ieeetypes_countryinfofullset*
-				 countryinfo,
+static int parse_domain_info_11d(struct ieee_ie_country_info_full_set *countryinfo,
 				 u8 band,
-				 struct parsed_region_chan_11d *
-				 parsed_region_chan)
+				 struct parsed_region_chan_11d *parsed_region_chan)
 {
 	u8 nr_subband, nrchan;
 	u8 lastchan, firstchan;
@@ -331,7 +329,7 @@ static int parse_domain_info_11d(struct ieeetypes_countryinfofullset*
 	lbs_deb_hex(LBS_DEB_11D, "countryinfo", (u8 *) countryinfo, 30);
 
 	if ((*(countryinfo->countrycode)) == 0
-	    || (countryinfo->len <= COUNTRY_CODE_LEN)) {
+	    || (countryinfo->header.len <= COUNTRY_CODE_LEN)) {
 		/* No region Info or Wrong region info: treat as No 11D info */
 		goto done;
 	}
@@ -349,8 +347,8 @@ static int parse_domain_info_11d(struct ieeetypes_countryinfofullset*
 	memcpy(parsed_region_chan->countrycode, countryinfo->countrycode,
 	       COUNTRY_CODE_LEN);
 
-	nr_subband = (countryinfo->len - COUNTRY_CODE_LEN) /
-	    sizeof(struct ieeetypes_subbandset);
+	nr_subband = (countryinfo->header.len - COUNTRY_CODE_LEN) /
+	    sizeof(struct ieee_subbandset);
 
 	for (j = 0, lastchan = 0; j < nr_subband; j++) {
 
@@ -502,7 +500,7 @@ int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
 {
 	struct cmd_ds_802_11d_domain_info *pdomaininfo =
 	    &cmd->params.domaininfo;
-	struct mrvlietypes_domainparamset *domain = &pdomaininfo->domain;
+	struct mrvl_ie_domain_param_set *domain = &pdomaininfo->domain;
 	u8 nr_subband = priv->domainreg.nr_subband;
 
 	lbs_deb_enter(LBS_DEB_11D);
@@ -524,16 +522,16 @@ int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
 	       sizeof(domain->countrycode));
 
 	domain->header.len =
-	    cpu_to_le16(nr_subband * sizeof(struct ieeetypes_subbandset) +
+	    cpu_to_le16(nr_subband * sizeof(struct ieee_subbandset) +
 			     sizeof(domain->countrycode));
 
 	if (nr_subband) {
 		memcpy(domain->subband, priv->domainreg.subband,
-		       nr_subband * sizeof(struct ieeetypes_subbandset));
+		       nr_subband * sizeof(struct ieee_subbandset));
 
 		cmd->size = cpu_to_le16(sizeof(pdomaininfo->action) +
 					     le16_to_cpu(domain->header.len) +
-					     sizeof(struct mrvlietypesheader) +
+					     sizeof(struct mrvl_ie_header) +
 					     S_DS_GEN);
 	} else {
 		cmd->size =
@@ -556,7 +554,7 @@ done:
 int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp)
 {
 	struct cmd_ds_802_11d_domain_info *domaininfo = &resp->params.domaininforesp;
-	struct mrvlietypes_domainparamset *domain = &domaininfo->domain;
+	struct mrvl_ie_domain_param_set *domain = &domaininfo->domain;
 	u16 action = le16_to_cpu(domaininfo->action);
 	s16 ret = 0;
 	u8 nr_subband = 0;
@@ -567,7 +565,7 @@ int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp)
 		(int)le16_to_cpu(resp->size));
 
 	nr_subband = (le16_to_cpu(domain->header.len) - COUNTRY_CODE_LEN) /
-		      sizeof(struct ieeetypes_subbandset);
+		      sizeof(struct ieee_subbandset);
 
 	lbs_deb_11d("domain info resp: nr_subband %d\n", nr_subband);
 
diff --git a/drivers/net/wireless/libertas/11d.h b/drivers/net/wireless/libertas/11d.h
index 4f4f47f0f87..fb75d3e321a 100644
--- a/drivers/net/wireless/libertas/11d.h
+++ b/drivers/net/wireless/libertas/11d.h
@@ -20,35 +20,36 @@
 struct cmd_ds_command;
 
 /** Data structure for Country IE*/
-struct ieeetypes_subbandset {
+struct ieee_subbandset {
 	u8 firstchan;
 	u8 nrchan;
 	u8 maxtxpwr;
 } __attribute__ ((packed));
 
-struct ieeetypes_countryinfoset {
-	u8 element_id;
-	u8 len;
+struct ieee_ie_country_info_set {
+	struct ieee_ie_header header;
+
 	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieeetypes_subbandset subband[1];
+	struct ieee_subbandset subband[1];
 };
 
-struct ieeetypes_countryinfofullset {
-	u8 element_id;
-	u8 len;
+struct ieee_ie_country_info_full_set {
+	struct ieee_ie_header header;
+
 	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieeetypes_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
+	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
 } __attribute__ ((packed));
 
-struct mrvlietypes_domainparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_domain_param_set {
+	struct mrvl_ie_header header;
+
 	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieeetypes_subbandset subband[1];
+	struct ieee_subbandset subband[1];
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11d_domain_info {
 	__le16 action;
-	struct mrvlietypes_domainparamset domain;
+	struct mrvl_ie_domain_param_set domain;
 } __attribute__ ((packed));
 
 /** domain regulatory information */
@@ -57,7 +58,7 @@ struct lbs_802_11d_domain_reg {
 	u8 countrycode[COUNTRY_CODE_LEN];
 	/** No. of subband*/
 	u8 nr_subband;
-	struct ieeetypes_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
+	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
 };
 
 struct chan_power_11d {
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index a0e440cd896..b9b37411903 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -12,15 +12,14 @@
 #include "scan.h"
 #include "cmd.h"
 
-static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp);
-
 static const u8 bssid_any[ETH_ALEN]  __attribute__ ((aligned (2))) =
 	{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 static const u8 bssid_off[ETH_ALEN]  __attribute__ ((aligned (2))) =
 	{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
-/* The firmware needs certain bits masked out of the beacon-derviced capability
- * field when associating/joining to BSSs.
+/* The firmware needs the following bits masked out of the beacon-derived
+ * capability field when associating/joining to a BSS:
+ *  9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
  */
 #define CAPINFO_MASK	(~(0xda00))
 
@@ -102,6 +101,295 @@ static void lbs_set_basic_rate_flags(u8 *rates, size_t len)
 }
 
 
+static u8 iw_auth_to_ieee_auth(u8 auth)
+{
+	if (auth == IW_AUTH_ALG_OPEN_SYSTEM)
+		return 0x00;
+	else if (auth == IW_AUTH_ALG_SHARED_KEY)
+		return 0x01;
+	else if (auth == IW_AUTH_ALG_LEAP)
+		return 0x80;
+
+	lbs_deb_join("%s: invalid auth alg 0x%X\n", __func__, auth);
+	return 0;
+}
+
+/**
+ *  @brief This function prepares the authenticate command.  AUTHENTICATE only
+ *  sets the authentication suite for future associations, as the firmware
+ *  handles authentication internally during the ASSOCIATE command.
+ *
+ *  @param priv      A pointer to struct lbs_private structure
+ *  @param bssid     The peer BSSID with which to authenticate
+ *  @param auth      The authentication mode to use (from wireless.h)
+ *
+ *  @return         0 or -1
+ */
+static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth)
+{
+	struct cmd_ds_802_11_authenticate cmd;
+	int ret = -1;
+	DECLARE_MAC_BUF(mac);
+
+	lbs_deb_enter(LBS_DEB_JOIN);
+
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+	memcpy(cmd.bssid, bssid, ETH_ALEN);
+
+	cmd.authtype = iw_auth_to_ieee_auth(auth);
+
+	lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n",
+		print_mac(mac, bssid), cmd.authtype);
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd);
+
+	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
+	return ret;
+}
+
+
+static int lbs_assoc_post(struct lbs_private *priv,
+			  struct cmd_ds_802_11_associate_response *resp)
+{
+	int ret = 0;
+	union iwreq_data wrqu;
+	struct bss_descriptor *bss;
+	u16 status_code;
+
+	lbs_deb_enter(LBS_DEB_ASSOC);
+
+	if (!priv->in_progress_assoc_req) {
+		lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n");
+		ret = -1;
+		goto done;
+	}
+	bss = &priv->in_progress_assoc_req->bss;
+
+	/*
+	 * Older FW versions map the IEEE 802.11 Status Code in the association
+	 * response to the following values returned in resp->statuscode:
+	 *
+	 *    IEEE Status Code                Marvell Status Code
+	 *    0                       ->      0x0000 ASSOC_RESULT_SUCCESS
+	 *    13                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    14                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    15                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    16                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    others                  ->      0x0003 ASSOC_RESULT_REFUSED
+	 *
+	 * Other response codes:
+	 *    0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
+	 *    0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
+	 *                                    association response from the AP)
+	 */
+
+	status_code = le16_to_cpu(resp->statuscode);
+	if (priv->fwrelease < 0x09000000) {
+		switch (status_code) {
+		case 0x00:
+			break;
+		case 0x01:
+			lbs_deb_assoc("ASSOC_RESP: invalid parameters\n");
+			break;
+		case 0x02:
+			lbs_deb_assoc("ASSOC_RESP: internal timer "
+				"expired while waiting for the AP\n");
+			break;
+		case 0x03:
+			lbs_deb_assoc("ASSOC_RESP: association "
+				"refused by AP\n");
+			break;
+		case 0x04:
+			lbs_deb_assoc("ASSOC_RESP: authentication "
+				"refused by AP\n");
+			break;
+		default:
+			lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x "
+				" unknown\n", status_code);
+			break;
+		}
+	} else {
+		/* v9+ returns the AP's association response */
+		lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x\n", status_code);
+	}
+
+	if (status_code) {
+		lbs_mac_event_disconnected(priv);
+		ret = -1;
+		goto done;
+	}
+
+	lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP",
+		    (void *) (resp + sizeof (resp->hdr)),
+		    le16_to_cpu(resp->hdr.size) - sizeof (resp->hdr));
+
+	/* Send a Media Connected event, according to the Spec */
+	priv->connect_status = LBS_CONNECTED;
+
+	/* Update current SSID and BSSID */
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	priv->curbssparams.ssid_len = bss->ssid_len;
+	memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
+
+	priv->SNR[TYPE_RXPD][TYPE_AVG] = 0;
+	priv->NF[TYPE_RXPD][TYPE_AVG] = 0;
+
+	memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR));
+	memset(priv->rawNF, 0x00, sizeof(priv->rawNF));
+	priv->nextSNRNF = 0;
+	priv->numSNRNF = 0;
+
+	netif_carrier_on(priv->dev);
+	if (!priv->tx_pending_len)
+		netif_wake_queue(priv->dev);
+
+	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
+done:
+	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
+	return ret;
+}
+
+/**
+ *  @brief This function prepares an association-class command.
+ *
+ *  @param priv      A pointer to struct lbs_private structure
+ *  @param assoc_req The association request describing the BSS to associate
+ *                   or reassociate with
+ *  @param command   The actual command, either CMD_802_11_ASSOCIATE or
+ *                   CMD_802_11_REASSOCIATE
+ *
+ *  @return         0 or -1
+ */
+static int lbs_associate(struct lbs_private *priv,
+			 struct assoc_request *assoc_req,
+			 u16 command)
+{
+	struct cmd_ds_802_11_associate cmd;
+	int ret = 0;
+	struct bss_descriptor *bss = &assoc_req->bss;
+	u8 *pos = &(cmd.iebuf[0]);
+	u16 tmpcap, tmplen, tmpauth;
+	struct mrvl_ie_ssid_param_set *ssid;
+	struct mrvl_ie_ds_param_set *ds;
+	struct mrvl_ie_cf_param_set *cf;
+	struct mrvl_ie_rates_param_set *rates;
+	struct mrvl_ie_rsn_param_set *rsn;
+	struct mrvl_ie_auth_type *auth;
+
+	lbs_deb_enter(LBS_DEB_ASSOC);
+
+	BUG_ON((command != CMD_802_11_ASSOCIATE) &&
+		(command != CMD_802_11_REASSOCIATE));
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.hdr.command = cpu_to_le16(command);
+
+	/* Fill in static fields */
+	memcpy(cmd.bssid, bss->bssid, ETH_ALEN);
+	cmd.listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
+
+	/* Capability info */
+	tmpcap = (bss->capability & CAPINFO_MASK);
+	if (bss->mode == IW_MODE_INFRA)
+		tmpcap |= WLAN_CAPABILITY_ESS;
+	cmd.capability = cpu_to_le16(tmpcap);
+	lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap);
+
+	/* SSID */
+	ssid = (struct mrvl_ie_ssid_param_set *) pos;
+	ssid->header.type = cpu_to_le16(TLV_TYPE_SSID);
+	tmplen = bss->ssid_len;
+	ssid->header.len = cpu_to_le16(tmplen);
+	memcpy(ssid->ssid, bss->ssid, tmplen);
+	pos += sizeof(ssid->header) + tmplen;
+
+	ds = (struct mrvl_ie_ds_param_set *) pos;
+	ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
+	ds->header.len = cpu_to_le16(1);
+	ds->channel = bss->phy.ds.channel;
+	pos += sizeof(ds->header) + 1;
+
+	cf = (struct mrvl_ie_cf_param_set *) pos;
+	cf->header.type = cpu_to_le16(TLV_TYPE_CF);
+	tmplen = sizeof(*cf) - sizeof (cf->header);
+	cf->header.len = cpu_to_le16(tmplen);
+	/* IE payload should be zeroed, firmware fills it in for us */
+	pos += sizeof(*cf);
+
+	rates = (struct mrvl_ie_rates_param_set *) pos;
+	rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
+	memcpy(&rates->rates, &bss->rates, MAX_RATES);
+	tmplen = MAX_RATES;
+	if (get_common_rates(priv, rates->rates, &tmplen)) {
+		ret = -1;
+		goto done;
+	}
+	pos += sizeof(rates->header) + tmplen;
+	rates->header.len = cpu_to_le16(tmplen);
+	lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen);
+
+	/* Copy the infra. association rates into Current BSS state structure */
+	memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates));
+	memcpy(&priv->curbssparams.rates, &rates->rates, tmplen);
+
+	/* Set MSB on basic rates as the firmware requires, but _after_
+	 * copying to current bss rates.
+	 */
+	lbs_set_basic_rate_flags(rates->rates, tmplen);
+
+	/* Firmware v9+ indicate authentication suites as a TLV */
+	if (priv->fwrelease >= 0x09000000) {
+		DECLARE_MAC_BUF(mac);
+
+		auth = (struct mrvl_ie_auth_type *) pos;
+		auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
+		auth->header.len = cpu_to_le16(2);
+		tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode);
+		auth->auth = cpu_to_le16(tmpauth);
+		pos += sizeof(auth->header) + 2;
+
+		lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n",
+			print_mac(mac, bss->bssid), priv->secinfo.auth_mode);
+	}
+
+	/* WPA/WPA2 IEs */
+	if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
+		rsn = (struct mrvl_ie_rsn_param_set *) pos;
+		/* WPA_IE or WPA2_IE */
+		rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]);
+		tmplen = (u16) assoc_req->wpa_ie[1];
+		rsn->header.len = cpu_to_le16(tmplen);
+		memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen);
+		lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: WPA/RSN IE", (u8 *) rsn,
+			sizeof(rsn->header) + tmplen);
+		pos += sizeof(rsn->header) + tmplen;
+	}
+
+	cmd.hdr.size = cpu_to_le16((sizeof(cmd) - sizeof(cmd.iebuf)) +
+				   (u16)(pos - (u8 *) &cmd.iebuf));
+
+	/* update curbssparams */
+	priv->curbssparams.channel = bss->phy.ds.channel;
+
+	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
+		ret = -1;
+		goto done;
+	}
+
+	ret = lbs_cmd_with_response(priv, command, &cmd);
+	if (ret == 0) {
+		ret = lbs_assoc_post(priv,
+			(struct cmd_ds_802_11_associate_response *) &cmd);
+	}
+
+done:
+	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
+	return ret;
+}
+
 /**
  *  @brief Associate to a specific BSS discovered in a scan
  *
@@ -110,7 +398,7 @@ static void lbs_set_basic_rate_flags(u8 *rates, size_t len)
  *
  *  @return          0-success, otherwise fail
  */
-static int lbs_associate(struct lbs_private *priv,
+static int lbs_try_associate(struct lbs_private *priv,
 	struct assoc_request *assoc_req)
 {
 	int ret;
@@ -118,11 +406,15 @@ static int lbs_associate(struct lbs_private *priv,
 
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_AUTHENTICATE,
-				    0, CMD_OPTION_WAITFORRSP,
-				    0, assoc_req->bss.bssid);
-	if (ret)
-		goto out;
+	/* FW v9 and higher indicate authentication suites as a TLV in the
+	 * association command, not as a separate authentication command.
+	 */
+	if (priv->fwrelease < 0x09000000) {
+		ret = lbs_set_authentication(priv, assoc_req->bss.bssid,
+					     priv->secinfo.auth_mode);
+		if (ret)
+			goto out;
+	}
 
 	/* Use short preamble only when both the BSS and firmware support it */
 	if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) &&
@@ -133,14 +425,78 @@ static int lbs_associate(struct lbs_private *priv,
 	if (ret)
 		goto out;
 
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_ASSOCIATE,
-				    0, CMD_OPTION_WAITFORRSP, 0, assoc_req);
+	ret = lbs_associate(priv, assoc_req, CMD_802_11_ASSOCIATE);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
 	return ret;
 }
 
+static int lbs_adhoc_post(struct lbs_private *priv,
+			  struct cmd_ds_802_11_ad_hoc_result *resp)
+{
+	int ret = 0;
+	u16 command = le16_to_cpu(resp->hdr.command);
+	u16 result = le16_to_cpu(resp->hdr.result);
+	union iwreq_data wrqu;
+	struct bss_descriptor *bss;
+	DECLARE_SSID_BUF(ssid);
+
+	lbs_deb_enter(LBS_DEB_JOIN);
+
+	if (!priv->in_progress_assoc_req) {
+		lbs_deb_join("ADHOC_RESP: no in-progress association "
+			"request\n");
+		ret = -1;
+		goto done;
+	}
+	bss = &priv->in_progress_assoc_req->bss;
+
+	/*
+	 * Join result code 0 --> SUCCESS
+	 */
+	if (result) {
+		lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result);
+		if (priv->connect_status == LBS_CONNECTED)
+			lbs_mac_event_disconnected(priv);
+		ret = -1;
+		goto done;
+	}
+
+	/* Send a Media Connected event, according to the Spec */
+	priv->connect_status = LBS_CONNECTED;
+
+	if (command == CMD_RET(CMD_802_11_AD_HOC_START)) {
+		/* Update the created network descriptor with the new BSSID */
+		memcpy(bss->bssid, resp->bssid, ETH_ALEN);
+	}
+
+	/* Set the BSSID from the joined/started descriptor */
+	memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
+
+	/* Set the new SSID to current SSID */
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	priv->curbssparams.ssid_len = bss->ssid_len;
+
+	netif_carrier_on(priv->dev);
+	if (!priv->tx_pending_len)
+		netif_wake_queue(priv->dev);
+
+	memset(&wrqu, 0, sizeof(wrqu));
+	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
+	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
+		     print_ssid(ssid, bss->ssid, bss->ssid_len),
+		     priv->curbssparams.bssid,
+		     priv->curbssparams.channel);
+
+done:
+	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
+	return ret;
+}
+
 /**
  *  @brief Join an adhoc network found in a previous scan
  *
@@ -219,11 +575,10 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	memcpy(&cmd.bss.bssid, &bss->bssid, ETH_ALEN);
 	memcpy(&cmd.bss.ssid, &bss->ssid, bss->ssid_len);
 
-	memcpy(&cmd.bss.phyparamset, &bss->phyparamset,
-	       sizeof(union ieeetypes_phyparamset));
+	memcpy(&cmd.bss.ds, &bss->phy.ds, sizeof(struct ieee_ie_ds_param_set));
 
-	memcpy(&cmd.bss.ssparamset, &bss->ssparamset,
-	       sizeof(union IEEEtypes_ssparamset));
+	memcpy(&cmd.bss.ibss, &bss->ss.ibss,
+	       sizeof(struct ieee_ie_ibss_param_set));
 
 	cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK);
 	lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n",
@@ -260,7 +615,7 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	 */
 	lbs_set_basic_rate_flags(cmd.bss.rates, ratesize);
 
-	cmd.bss.ssparamset.ibssparamset.atimwindow = cpu_to_le16(bss->atimwindow);
+	cmd.bss.ibss.atimwindow = bss->atimwindow;
 
 	if (assoc_req->secinfo.wep_enabled) {
 		u16 tmp = le16_to_cpu(cmd.bss.capability);
@@ -287,8 +642,10 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	}
 
 	ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
-	if (ret == 0)
-		ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd);
+	if (ret == 0) {
+		ret = lbs_adhoc_post(priv,
+				     (struct cmd_ds_802_11_ad_hoc_result *)&cmd);
+	}
 
 out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -343,22 +700,24 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 	WARN_ON(!assoc_req->channel);
 
 	/* set Physical parameter set */
-	cmd.phyparamset.dsparamset.elementid = WLAN_EID_DS_PARAMS;
-	cmd.phyparamset.dsparamset.len = 1;
-	cmd.phyparamset.dsparamset.currentchan = assoc_req->channel;
+	cmd.ds.header.id = WLAN_EID_DS_PARAMS;
+	cmd.ds.header.len = 1;
+	cmd.ds.channel = assoc_req->channel;
 
 	/* set IBSS parameter set */
-	cmd.ssparamset.ibssparamset.elementid = WLAN_EID_IBSS_PARAMS;
-	cmd.ssparamset.ibssparamset.len = 2;
-	cmd.ssparamset.ibssparamset.atimwindow = 0;
+	cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS;
+	cmd.ibss.header.len = 2;
+	cmd.ibss.atimwindow = cpu_to_le16(0);
 
 	/* set capability info */
 	tmpcap = WLAN_CAPABILITY_IBSS;
-	if (assoc_req->secinfo.wep_enabled) {
-		lbs_deb_join("ADHOC_START: WEP enabled, setting privacy on\n");
+	if (assoc_req->secinfo.wep_enabled ||
+	    assoc_req->secinfo.WPAenabled ||
+	    assoc_req->secinfo.WPA2enabled) {
+		lbs_deb_join("ADHOC_START: WEP/WPA enabled, privacy on\n");
 		tmpcap |= WLAN_CAPABILITY_PRIVACY;
 	} else
-		lbs_deb_join("ADHOC_START: WEP disabled, setting privacy off\n");
+		lbs_deb_join("ADHOC_START: WEP disabled, privacy off\n");
 
 	cmd.capability = cpu_to_le16(tmpcap);
 
@@ -395,7 +754,8 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 
 	ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd);
 	if (ret == 0)
-		ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd);
+		ret = lbs_adhoc_post(priv,
+				     (struct cmd_ds_802_11_ad_hoc_result *)&cmd);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -720,7 +1080,7 @@ static int assoc_helper_essid(struct lbs_private *priv,
 				assoc_req->ssid_len, NULL, IW_MODE_INFRA, channel);
 		if (bss != NULL) {
 			memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor));
-			ret = lbs_associate(priv, assoc_req);
+			ret = lbs_try_associate(priv, assoc_req);
 		} else {
 			lbs_deb_assoc("SSID not found; cannot associate\n");
 		}
@@ -772,8 +1132,9 @@ static int assoc_helper_bssid(struct lbs_private *priv,
 
 	memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor));
 	if (assoc_req->mode == IW_MODE_INFRA) {
-		ret = lbs_associate(priv, assoc_req);
-		lbs_deb_assoc("ASSOC: lbs_associate(bssid) returned %d\n", ret);
+		ret = lbs_try_associate(priv, assoc_req);
+		lbs_deb_assoc("ASSOC: lbs_try_associate(bssid) returned %d\n",
+			      ret);
 	} else if (assoc_req->mode == IW_MODE_ADHOC) {
 		lbs_adhoc_join(priv, assoc_req);
 	}
@@ -1467,57 +1828,6 @@ struct assoc_request *lbs_get_association_request(struct lbs_private *priv)
 
 
 /**
- *  @brief This function prepares command of authenticate.
- *
- *  @param priv      A pointer to struct lbs_private structure
- *  @param cmd       A pointer to cmd_ds_command structure
- *  @param pdata_buf Void cast of pointer to a BSSID to authenticate with
- *
- *  @return         0 or -1
- */
-int lbs_cmd_80211_authenticate(struct lbs_private *priv,
-				 struct cmd_ds_command *cmd,
-				 void *pdata_buf)
-{
-	struct cmd_ds_802_11_authenticate *pauthenticate = &cmd->params.auth;
-	int ret = -1;
-	u8 *bssid = pdata_buf;
-
-	lbs_deb_enter(LBS_DEB_JOIN);
-
-	cmd->command = cpu_to_le16(CMD_802_11_AUTHENTICATE);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
-			+ S_DS_GEN);
-
-	/* translate auth mode to 802.11 defined wire value */
-	switch (priv->secinfo.auth_mode) {
-	case IW_AUTH_ALG_OPEN_SYSTEM:
-		pauthenticate->authtype = 0x00;
-		break;
-	case IW_AUTH_ALG_SHARED_KEY:
-		pauthenticate->authtype = 0x01;
-		break;
-	case IW_AUTH_ALG_LEAP:
-		pauthenticate->authtype = 0x80;
-		break;
-	default:
-		lbs_deb_join("AUTH_CMD: invalid auth alg 0x%X\n",
-			priv->secinfo.auth_mode);
-		goto out;
-	}
-
-	memcpy(pauthenticate->macaddr, bssid, ETH_ALEN);
-
-	lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n",
-		bssid, pauthenticate->authtype);
-	ret = 0;
-
-out:
-	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
-	return ret;
-}
-
-/**
  *  @brief Deauthenticate from a specific BSS
  *
  *  @param priv        A pointer to struct lbs_private structure
@@ -1550,285 +1860,3 @@ int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN],
 	return ret;
 }
 
-int lbs_cmd_80211_associate(struct lbs_private *priv,
-			      struct cmd_ds_command *cmd, void *pdata_buf)
-{
-	struct cmd_ds_802_11_associate *passo = &cmd->params.associate;
-	int ret = 0;
-	struct assoc_request *assoc_req = pdata_buf;
-	struct bss_descriptor *bss = &assoc_req->bss;
-	u8 *pos;
-	u16 tmpcap, tmplen;
-	struct mrvlietypes_ssidparamset *ssid;
-	struct mrvlietypes_phyparamset *phy;
-	struct mrvlietypes_ssparamset *ss;
-	struct mrvlietypes_ratesparamset *rates;
-	struct mrvlietypes_rsnparamset *rsn;
-
-	lbs_deb_enter(LBS_DEB_ASSOC);
-
-	pos = (u8 *) passo;
-
-	if (!priv) {
-		ret = -1;
-		goto done;
-	}
-
-	cmd->command = cpu_to_le16(CMD_802_11_ASSOCIATE);
-
-	memcpy(passo->peerstaaddr, bss->bssid, sizeof(passo->peerstaaddr));
-	pos += sizeof(passo->peerstaaddr);
-
-	/* set the listen interval */
-	passo->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
-
-	pos += sizeof(passo->capability);
-	pos += sizeof(passo->listeninterval);
-	pos += sizeof(passo->bcnperiod);
-	pos += sizeof(passo->dtimperiod);
-
-	ssid = (struct mrvlietypes_ssidparamset *) pos;
-	ssid->header.type = cpu_to_le16(TLV_TYPE_SSID);
-	tmplen = bss->ssid_len;
-	ssid->header.len = cpu_to_le16(tmplen);
-	memcpy(ssid->ssid, bss->ssid, tmplen);
-	pos += sizeof(ssid->header) + tmplen;
-
-	phy = (struct mrvlietypes_phyparamset *) pos;
-	phy->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
-	tmplen = sizeof(phy->fh_ds.dsparamset);
-	phy->header.len = cpu_to_le16(tmplen);
-	memcpy(&phy->fh_ds.dsparamset,
-	       &bss->phyparamset.dsparamset.currentchan,
-	       tmplen);
-	pos += sizeof(phy->header) + tmplen;
-
-	ss = (struct mrvlietypes_ssparamset *) pos;
-	ss->header.type = cpu_to_le16(TLV_TYPE_CF);
-	tmplen = sizeof(ss->cf_ibss.cfparamset);
-	ss->header.len = cpu_to_le16(tmplen);
-	pos += sizeof(ss->header) + tmplen;
-
-	rates = (struct mrvlietypes_ratesparamset *) pos;
-	rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
-	memcpy(&rates->rates, &bss->rates, MAX_RATES);
-	tmplen = MAX_RATES;
-	if (get_common_rates(priv, rates->rates, &tmplen)) {
-		ret = -1;
-		goto done;
-	}
-	pos += sizeof(rates->header) + tmplen;
-	rates->header.len = cpu_to_le16(tmplen);
-	lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen);
-
-	/* Copy the infra. association rates into Current BSS state structure */
-	memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates));
-	memcpy(&priv->curbssparams.rates, &rates->rates, tmplen);
-
-	/* Set MSB on basic rates as the firmware requires, but _after_
-	 * copying to current bss rates.
-	 */
-	lbs_set_basic_rate_flags(rates->rates, tmplen);
-
-	if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
-		rsn = (struct mrvlietypes_rsnparamset *) pos;
-		/* WPA_IE or WPA2_IE */
-		rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]);
-		tmplen = (u16) assoc_req->wpa_ie[1];
-		rsn->header.len = cpu_to_le16(tmplen);
-		memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen);
-		lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: RSN IE", (u8 *) rsn,
-			sizeof(rsn->header) + tmplen);
-		pos += sizeof(rsn->header) + tmplen;
-	}
-
-	/* update curbssparams */
-	priv->curbssparams.channel = bss->phyparamset.dsparamset.currentchan;
-
-	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
-		ret = -1;
-		goto done;
-	}
-
-	cmd->size = cpu_to_le16((u16) (pos - (u8 *) passo) + S_DS_GEN);
-
-	/* set the capability info */
-	tmpcap = (bss->capability & CAPINFO_MASK);
-	if (bss->mode == IW_MODE_INFRA)
-		tmpcap |= WLAN_CAPABILITY_ESS;
-	passo->capability = cpu_to_le16(tmpcap);
-	lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
-	return ret;
-}
-
-int lbs_ret_80211_associate(struct lbs_private *priv,
-			      struct cmd_ds_command *resp)
-{
-	int ret = 0;
-	union iwreq_data wrqu;
-	struct ieeetypes_assocrsp *passocrsp;
-	struct bss_descriptor *bss;
-	u16 status_code;
-
-	lbs_deb_enter(LBS_DEB_ASSOC);
-
-	if (!priv->in_progress_assoc_req) {
-		lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n");
-		ret = -1;
-		goto done;
-	}
-	bss = &priv->in_progress_assoc_req->bss;
-
-	passocrsp = (struct ieeetypes_assocrsp *) &resp->params;
-
-	/*
-	 * Older FW versions map the IEEE 802.11 Status Code in the association
-	 * response to the following values returned in passocrsp->statuscode:
-	 *
-	 *    IEEE Status Code                Marvell Status Code
-	 *    0                       ->      0x0000 ASSOC_RESULT_SUCCESS
-	 *    13                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    14                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    15                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    16                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    others                  ->      0x0003 ASSOC_RESULT_REFUSED
-	 *
-	 * Other response codes:
-	 *    0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
-	 *    0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
-	 *                                    association response from the AP)
-	 */
-
-	status_code = le16_to_cpu(passocrsp->statuscode);
-	switch (status_code) {
-	case 0x00:
-		break;
-	case 0x01:
-		lbs_deb_assoc("ASSOC_RESP: invalid parameters\n");
-		break;
-	case 0x02:
-		lbs_deb_assoc("ASSOC_RESP: internal timer "
-			"expired while waiting for the AP\n");
-		break;
-	case 0x03:
-		lbs_deb_assoc("ASSOC_RESP: association "
-			"refused by AP\n");
-		break;
-	case 0x04:
-		lbs_deb_assoc("ASSOC_RESP: authentication "
-			"refused by AP\n");
-		break;
-	default:
-		lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x "
-			" unknown\n", status_code);
-		break;
-	}
-
-	if (status_code) {
-		lbs_mac_event_disconnected(priv);
-		ret = -1;
-		goto done;
-	}
-
-	lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP", (void *)&resp->params,
-		le16_to_cpu(resp->size) - S_DS_GEN);
-
-	/* Send a Media Connected event, according to the Spec */
-	priv->connect_status = LBS_CONNECTED;
-
-	/* Update current SSID and BSSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
-	priv->curbssparams.ssid_len = bss->ssid_len;
-	memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
-
-	priv->SNR[TYPE_RXPD][TYPE_AVG] = 0;
-	priv->NF[TYPE_RXPD][TYPE_AVG] = 0;
-
-	memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR));
-	memset(priv->rawNF, 0x00, sizeof(priv->rawNF));
-	priv->nextSNRNF = 0;
-	priv->numSNRNF = 0;
-
-	netif_carrier_on(priv->dev);
-	if (!priv->tx_pending_len)
-		netif_wake_queue(priv->dev);
-
-	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
-	return ret;
-}
-
-static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp)
-{
-	int ret = 0;
-	u16 command = le16_to_cpu(resp->command);
-	u16 result = le16_to_cpu(resp->result);
-	struct cmd_ds_802_11_ad_hoc_result *adhoc_resp;
-	union iwreq_data wrqu;
-	struct bss_descriptor *bss;
-	DECLARE_SSID_BUF(ssid);
-
-	lbs_deb_enter(LBS_DEB_JOIN);
-
-	adhoc_resp = (struct cmd_ds_802_11_ad_hoc_result *) resp;
-
-	if (!priv->in_progress_assoc_req) {
-		lbs_deb_join("ADHOC_RESP: no in-progress association "
-			"request\n");
-		ret = -1;
-		goto done;
-	}
-	bss = &priv->in_progress_assoc_req->bss;
-
-	/*
-	 * Join result code 0 --> SUCCESS
-	 */
-	if (result) {
-		lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result);
-		if (priv->connect_status == LBS_CONNECTED)
-			lbs_mac_event_disconnected(priv);
-		ret = -1;
-		goto done;
-	}
-
-	/* Send a Media Connected event, according to the Spec */
-	priv->connect_status = LBS_CONNECTED;
-
-	if (command == CMD_RET(CMD_802_11_AD_HOC_START)) {
-		/* Update the created network descriptor with the new BSSID */
-		memcpy(bss->bssid, adhoc_resp->bssid, ETH_ALEN);
-	}
-
-	/* Set the BSSID from the joined/started descriptor */
-	memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
-
-	/* Set the new SSID to current SSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
-	priv->curbssparams.ssid_len = bss->ssid_len;
-
-	netif_carrier_on(priv->dev);
-	if (!priv->tx_pending_len)
-		netif_wake_queue(priv->dev);
-
-	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
-
-	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
-		     print_ssid(ssid, bss->ssid, bss->ssid_len),
-		     priv->curbssparams.bssid,
-		     priv->curbssparams.channel);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
-	return ret;
-}
-
diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h
index 8b7336dd02a..6e765e9f91a 100644
--- a/drivers/net/wireless/libertas/assoc.h
+++ b/drivers/net/wireless/libertas/assoc.h
@@ -8,22 +8,9 @@
 void lbs_association_worker(struct work_struct *work);
 struct assoc_request *lbs_get_association_request(struct lbs_private *priv);
 
-struct cmd_ds_command;
-int lbs_cmd_80211_authenticate(struct lbs_private *priv,
-					struct cmd_ds_command *cmd,
-					void *pdata_buf);
-
 int lbs_adhoc_stop(struct lbs_private *priv);
 
 int lbs_cmd_80211_deauthenticate(struct lbs_private *priv,
 				 u8 bssid[ETH_ALEN], u16 reason);
-int lbs_cmd_80211_associate(struct lbs_private *priv,
-				     struct cmd_ds_command *cmd,
-				     void *pdata_buf);
-
-int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv,
-					struct cmd_ds_command *resp);
-int lbs_ret_80211_associate(struct lbs_private *priv,
-				     struct cmd_ds_command *resp);
 
 #endif /* _LBS_ASSOC_H */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 8c3605cdc64..01db705a38e 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -119,6 +119,19 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
 		    cmd.hwifversion, cmd.version);
 
+	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
+	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
+	/* 5.110.22 have mesh command with 0xa3 command id */
+	/* 10.0.0.p0 FW brings in mesh config command with different id */
+	/* Check FW version MSB and initialize mesh_fw_ver */
+	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
+		priv->mesh_fw_ver = MESH_FW_OLD;
+	else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
+		(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK))
+		priv->mesh_fw_ver = MESH_FW_NEW;
+	else
+		priv->mesh_fw_ver = MESH_NONE;
+
 	/* Clamp region code to 8-bit since FW spec indicates that it should
 	 * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
 	 * returns non-zero high 8 bits here.
@@ -1036,17 +1049,26 @@ static int __lbs_mesh_config_send(struct lbs_private *priv,
 				  uint16_t action, uint16_t type)
 {
 	int ret;
+	u16 command = CMD_MESH_CONFIG_OLD;
 
 	lbs_deb_enter(LBS_DEB_CMD);
 
-	cmd->hdr.command = cpu_to_le16(CMD_MESH_CONFIG);
+	/*
+	 * Command id is 0xac for v10 FW along with mesh interface
+	 * id in bits 14-13-12.
+	 */
+	if (priv->mesh_fw_ver == MESH_FW_NEW)
+		command = CMD_MESH_CONFIG |
+			  (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
+
+	cmd->hdr.command = cpu_to_le16(command);
 	cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
 	cmd->hdr.result = 0;
 
 	cmd->type = cpu_to_le16(type);
 	cmd->action = cpu_to_le16(action);
 
-	ret = lbs_cmd_with_response(priv, CMD_MESH_CONFIG, cmd);
+	ret = lbs_cmd_with_response(priv, command, cmd);
 
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
@@ -1198,8 +1220,7 @@ static void lbs_submit_command(struct lbs_private *priv,
 	command = le16_to_cpu(cmd->command);
 
 	/* These commands take longer */
-	if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE ||
-	    command == CMD_802_11_AUTHENTICATE)
+	if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE)
 		timeo = 5 * HZ;
 
 	lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n",
@@ -1393,15 +1414,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		ret = lbs_cmd_802_11_ps_mode(cmdptr, cmd_action);
 		break;
 
-	case CMD_802_11_ASSOCIATE:
-	case CMD_802_11_REASSOCIATE:
-		ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf);
-		break;
-
-	case CMD_802_11_AUTHENTICATE:
-		ret = lbs_cmd_80211_authenticate(priv, cmdptr, pdata_buf);
-		break;
-
 	case CMD_MAC_REG_ACCESS:
 	case CMD_BBP_REG_ACCESS:
 	case CMD_RF_REG_ACCESS:
@@ -1448,8 +1460,8 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		break;
 	case CMD_802_11_LED_GPIO_CTRL:
 		{
-			struct mrvlietypes_ledgpio *gpio =
-			    (struct mrvlietypes_ledgpio*)
+			struct mrvl_ie_ledgpio *gpio =
+			    (struct mrvl_ie_ledgpio*)
 			    cmdptr->params.ledgpio.data;
 
 			memmove(&cmdptr->params.ledgpio,
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index bcf2a9756fb..c42d3faa266 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -5,7 +5,7 @@
 #include <linux/delay.h>
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
-
+#include <asm/unaligned.h>
 #include <net/iw_handler.h>
 
 #include "host.h"
@@ -154,11 +154,11 @@ static int lbs_ret_802_11_rssi(struct lbs_private *priv,
 	lbs_deb_enter(LBS_DEB_CMD);
 
 	/* store the non average value */
-	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = le16_to_cpu(rssirsp->SNR);
-	priv->NF[TYPE_BEACON][TYPE_NOAVG] = le16_to_cpu(rssirsp->noisefloor);
+	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR);
+	priv->NF[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->noisefloor);
 
-	priv->SNR[TYPE_BEACON][TYPE_AVG] = le16_to_cpu(rssirsp->avgSNR);
-	priv->NF[TYPE_BEACON][TYPE_AVG] = le16_to_cpu(rssirsp->avgnoisefloor);
+	priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR);
+	priv->NF[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgnoisefloor);
 
 	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] =
 	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG],
@@ -210,12 +210,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
 		ret = lbs_ret_reg_access(priv, respcmd, resp);
 		break;
 
-	case CMD_RET_802_11_ASSOCIATE:
-	case CMD_RET(CMD_802_11_ASSOCIATE):
-	case CMD_RET(CMD_802_11_REASSOCIATE):
-		ret = lbs_ret_80211_associate(priv, resp);
-		break;
-
 	case CMD_RET(CMD_802_11_SET_AFC):
 	case CMD_RET(CMD_802_11_GET_AFC):
 		spin_lock_irqsave(&priv->driver_lock, flags);
@@ -225,7 +219,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
 
 		break;
 
-	case CMD_RET(CMD_802_11_AUTHENTICATE):
 	case CMD_RET(CMD_802_11_BEACON_STOP):
 		break;
 
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 50e28a0cdfe..811ffc3ef41 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -183,12 +183,12 @@ out_unlock:
  */
 static void *lbs_tlv_find(uint16_t tlv_type, const uint8_t *tlv, uint16_t size)
 {
-	struct mrvlietypesheader *tlv_h;
+	struct mrvl_ie_header *tlv_h;
 	uint16_t length;
 	ssize_t pos = 0;
 
 	while (pos < size) {
-		tlv_h = (struct mrvlietypesheader *) tlv;
+		tlv_h = (struct mrvl_ie_header *) tlv;
 		if (!tlv_h->len)
 			return NULL;
 		if (tlv_h->type == cpu_to_le16(tlv_type))
@@ -206,7 +206,7 @@ static ssize_t lbs_threshold_read(uint16_t tlv_type, uint16_t event_mask,
 				  size_t count, loff_t *ppos)
 {
 	struct cmd_ds_802_11_subscribe_event *subscribed;
-	struct mrvlietypes_thresholds *got;
+	struct mrvl_ie_thresholds *got;
 	struct lbs_private *priv = file->private_data;
 	ssize_t ret = 0;
 	size_t pos = 0;
@@ -259,7 +259,7 @@ static ssize_t lbs_threshold_write(uint16_t tlv_type, uint16_t event_mask,
 				   loff_t *ppos)
 {
 	struct cmd_ds_802_11_subscribe_event *events;
-	struct mrvlietypes_thresholds *tlv;
+	struct mrvl_ie_thresholds *tlv;
 	struct lbs_private *priv = file->private_data;
 	ssize_t buf_size;
 	int value, freq, new_mask;
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index e8dfde39abf..48da157d6cd 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -227,6 +227,20 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 #define TxPD_CONTROL_WDS_FRAME (1<<17)
 #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
 
+/** Mesh interface ID */
+#define MESH_IFACE_ID					0x0001
+/** Mesh id should be in bits 14-13-12 */
+#define MESH_IFACE_BIT_OFFSET				0x000c
+/** Mesh enable bit in FW capability */
+#define MESH_CAPINFO_ENABLE_MASK			(1<<16)
+
+/** FW definition from Marvell v5 */
+#define MRVL_FW_V5					(0x05)
+/** FW definition from Marvell v10 */
+#define MRVL_FW_V10					(0x0a)
+/** FW major revision definition */
+#define MRVL_FW_MAJOR_REV(x)				((x)>>24)
+
 /** RxPD status */
 
 #define MRVDRV_RXPD_STATUS_OK                0x0001
@@ -380,6 +394,13 @@ enum KEY_INFO_WPA {
 	KEY_INFO_WPA_ENABLED = 0x04
 };
 
+/** mesh_fw_ver */
+enum _mesh_fw_ver {
+	MESH_NONE = 0, /* MESH is not supported */
+	MESH_FW_OLD,   /* MESH is supported in FW V5 */
+	MESH_FW_NEW,   /* MESH is supported in FW V10 and newer */
+};
+
 /* Default values for fwt commands. */
 #define FWT_DEFAULT_METRIC 0
 #define FWT_DEFAULT_DIR 1
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 27e81fd97c9..f9ec69e0473 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -101,6 +101,7 @@ struct lbs_mesh_stats {
 /** Private structure for the MV device */
 struct lbs_private {
 	int mesh_open;
+	int mesh_fw_ver;
 	int infra_open;
 	int mesh_autostart_enabled;
 
@@ -337,7 +338,7 @@ struct bss_descriptor {
 	u32 rssi;
 	u32 channel;
 	u16 beaconperiod;
-	u32 atimwindow;
+	__le16 atimwindow;
 
 	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
 	u8 mode;
@@ -347,10 +348,10 @@ struct bss_descriptor {
 
 	unsigned long last_scanned;
 
-	union ieeetypes_phyparamset phyparamset;
-	union IEEEtypes_ssparamset ssparamset;
+	union ieee_phy_param_set phy;
+	union ieee_ss_param_set ss;
 
-	struct ieeetypes_countryinfofullset countryinfo;
+	struct ieee_ie_country_info_full_set countryinfo;
 
 	u8 wpa_ie[MAX_WPA_IE_LEN];
 	size_t wpa_ie_len;
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index d4457ef808a..fe8f0cb737b 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -83,8 +83,11 @@
 #define CMD_FWT_ACCESS				0x0095
 #define CMD_802_11_MONITOR_MODE			0x0098
 #define CMD_MESH_ACCESS				0x009b
-#define CMD_MESH_CONFIG				0x00a3
+#define CMD_MESH_CONFIG_OLD			0x00a3
+#define CMD_MESH_CONFIG				0x00ac
 #define	CMD_SET_BOOT2_VER			0x00a5
+#define	CMD_FUNC_INIT				0x00a9
+#define	CMD_FUNC_SHUTDOWN			0x00aa
 #define CMD_802_11_BEACON_CTRL			0x00b0
 
 /* For the IEEE Power Save */
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index a899aeb676b..0a2e29140ad 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -13,8 +13,19 @@
 
 /* TxPD descriptor */
 struct txpd {
-	/* Current Tx packet status */
-	__le32 tx_status;
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Tx packet status */
+		__le32 tx_status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+			/* Reserved */
+			__le16 reserved;
+		} bss;
+	} u;
 	/* Tx control */
 	__le32 tx_control;
 	__le32 tx_packet_location;
@@ -36,8 +47,17 @@ struct txpd {
 
 /* RxPD Descriptor */
 struct rxpd {
-	/* Current Rx packet status */
-	__le16 status;
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Rx packet status */
+		__le16 status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+		} bss;
+	} u;
 
 	/* SNR */
 	u8 snr;
@@ -230,7 +250,9 @@ struct cmd_ds_gspi_bus_config {
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11_authenticate {
-	u8 macaddr[ETH_ALEN];
+	struct cmd_header hdr;
+
+	u8 bssid[ETH_ALEN];
 	u8 authtype;
 	u8 reserved[10];
 } __attribute__ ((packed));
@@ -243,22 +265,23 @@ struct cmd_ds_802_11_deauthenticate {
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11_associate {
-	u8 peerstaaddr[6];
+	struct cmd_header hdr;
+
+	u8 bssid[6];
 	__le16 capability;
 	__le16 listeninterval;
 	__le16 bcnperiod;
 	u8 dtimperiod;
-
-#if 0
-	mrvlietypes_ssidparamset_t ssidParamSet;
-	mrvlietypes_phyparamset_t phyparamset;
-	mrvlietypes_ssparamset_t ssparamset;
-	mrvlietypes_ratesparamset_t ratesParamSet;
-#endif
+	u8 iebuf[512];    /* Enough for required and most optional IEs */
 } __attribute__ ((packed));
 
-struct cmd_ds_802_11_associate_rsp {
-	struct ieeetypes_assocrsp assocRsp;
+struct cmd_ds_802_11_associate_response {
+	struct cmd_header hdr;
+
+	__le16 capability;
+	__le16 statuscode;
+	__le16 aid;
+	u8 iebuf[512];
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11_set_wep {
@@ -515,9 +538,11 @@ struct cmd_ds_802_11_ad_hoc_start {
 	u8 bsstype;
 	__le16 beaconperiod;
 	u8 dtimperiod;   /* Reserved on v9 and later */
-	union IEEEtypes_ssparamset ssparamset;
-	union ieeetypes_phyparamset phyparamset;
-	__le16 probedelay;
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved1[4];
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved2[4];
+	__le16 probedelay;  /* Reserved on v9 and later */
 	__le16 capability;
 	u8 rates[MAX_RATES];
 	u8 tlv_memory_size_pad[100];
@@ -538,8 +563,10 @@ struct adhoc_bssdesc {
 	u8 dtimperiod;
 	__le64 timestamp;
 	__le64 localtime;
-	union ieeetypes_phyparamset phyparamset;
-	union IEEEtypes_ssparamset ssparamset;
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved1[4];
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved2[4];
 	__le16 capability;
 	u8 rates[MAX_RATES];
 
@@ -745,8 +772,6 @@ struct cmd_ds_command {
 	/* command Body */
 	union {
 		struct cmd_ds_802_11_ps_mode psmode;
-		struct cmd_ds_802_11_associate associate;
-		struct cmd_ds_802_11_authenticate auth;
 		struct cmd_ds_802_11_get_stat gstat;
 		struct cmd_ds_802_3_get_stat gstat_8023;
 		struct cmd_ds_802_11_rf_antenna rant;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index cedeac6322f..2a5b083bf9b 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -273,7 +273,28 @@ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 r
  */
 #define IF_CS_PRODUCT_ID		0x0000001C
 #define IF_CS_CF8385_B1_REV		0x12
+#define IF_CS_CF8381_B3_REV		0x04
 
+/*
+ * Used to detect other cards than CF8385 since their revisions of silicon
+ * doesn't match those from CF8385, eg. CF8381 B3 works with this driver.
+ */
+#define CF8381_MANFID		0x02db
+#define CF8381_CARDID		0x6064
+#define CF8385_MANFID		0x02df
+#define CF8385_CARDID		0x8103
+
+static inline int if_cs_hw_is_cf8381(struct pcmcia_device *p_dev)
+{
+	return (p_dev->manf_id == CF8381_MANFID &&
+		p_dev->card_id == CF8381_CARDID);
+}
+
+static inline int if_cs_hw_is_cf8385(struct pcmcia_device *p_dev)
+{
+	return (p_dev->manf_id == CF8385_MANFID &&
+		p_dev->card_id == CF8385_CARDID);
+}
 
 /********************************************************************/
 /* I/O and interrupt handling                                       */
@@ -757,6 +778,7 @@ static void if_cs_release(struct pcmcia_device *p_dev)
 static int if_cs_probe(struct pcmcia_device *p_dev)
 {
 	int ret = -ENOMEM;
+	unsigned int prod_id;
 	struct lbs_private *priv;
 	struct if_cs_card *card;
 	/* CIS parsing */
@@ -859,7 +881,14 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	       p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
 
 	/* Check if we have a current silicon */
-	if (if_cs_read8(card, IF_CS_PRODUCT_ID) < IF_CS_CF8385_B1_REV) {
+	prod_id = if_cs_read8(card, IF_CS_PRODUCT_ID);
+	if (if_cs_hw_is_cf8381(p_dev) && prod_id < IF_CS_CF8381_B3_REV) {
+		lbs_pr_err("old chips like 8381 rev B3 aren't supported\n");
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	if (if_cs_hw_is_cf8385(p_dev) && prod_id < IF_CS_CF8385_B1_REV) {
 		lbs_pr_err("old chips like 8385 rev B1 aren't supported\n");
 		ret = -ENODEV;
 		goto out2;
@@ -950,7 +979,8 @@ static void if_cs_detach(struct pcmcia_device *p_dev)
 /********************************************************************/
 
 static struct pcmcia_device_id if_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
+	PCMCIA_DEVICE_MANF_CARD(CF8381_MANFID, CF8381_CARDID),
+	PCMCIA_DEVICE_MANF_CARD(CF8385_MANFID, CF8385_CARDID),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 76f4c653d64..8cdb88c6ca2 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -39,8 +39,24 @@
 #include "decl.h"
 #include "defs.h"
 #include "dev.h"
+#include "cmd.h"
 #include "if_sdio.h"
 
+/* The if_sdio_remove() callback function is called when
+ * user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently for SD8688 combo chip.
+ * If the user is removing the module, the FUNC_SHUTDOWN
+ * command for SD8688 is sent to the firmware.
+ * If the card is removed, there is no need to send this command.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
 static char *lbs_helper_name = NULL;
 module_param_named(helper_name, lbs_helper_name, charp, 0644);
 
@@ -48,8 +64,11 @@ static char *lbs_fw_name = NULL;
 module_param_named(fw_name, lbs_fw_name, charp, 0644);
 
 static const struct sdio_device_id if_sdio_ids[] = {
-	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
-	{ /* end: all zeroes */						},
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
+			SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
+			SDIO_DEVICE_ID_MARVELL_8688WLAN) },
+	{ /* end: all zeroes */				},
 };
 
 MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
@@ -63,16 +82,22 @@ struct if_sdio_model {
 static struct if_sdio_model if_sdio_models[] = {
 	{
 		/* 8385 */
-		.model = 0x04,
+		.model = IF_SDIO_MODEL_8385,
 		.helper = "sd8385_helper.bin",
 		.firmware = "sd8385.bin",
 	},
 	{
 		/* 8686 */
-		.model = 0x0B,
+		.model = IF_SDIO_MODEL_8686,
 		.helper = "sd8686_helper.bin",
 		.firmware = "sd8686.bin",
 	},
+	{
+		/* 8688 */
+		.model = IF_SDIO_MODEL_8688,
+		.helper = "sd8688_helper.bin",
+		.firmware = "sd8688.bin",
+	},
 };
 
 struct if_sdio_packet {
@@ -87,6 +112,7 @@ struct if_sdio_card {
 
 	int			model;
 	unsigned long		ioport;
+	unsigned int		scratch_reg;
 
 	const char		*helper;
 	const char		*firmware;
@@ -98,25 +124,29 @@ struct if_sdio_card {
 
 	struct workqueue_struct	*workqueue;
 	struct work_struct	packet_worker;
+
+	u8			rx_unit;
 };
 
 /********************************************************************/
 /* I/O                                                              */
 /********************************************************************/
 
+/*
+ *  For SD8385/SD8686, this function reads firmware status after
+ *  the image is downloaded, or reads RX packet length when
+ *  interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
+ *  For SD8688, this function reads firmware status only.
+ */
 static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
 {
-	int ret, reg;
+	int ret;
 	u16 scratch;
 
-	if (card->model == 0x04)
-		reg = IF_SDIO_SCRATCH_OLD;
-	else
-		reg = IF_SDIO_SCRATCH;
-
-	scratch = sdio_readb(card->func, reg, &ret);
+	scratch = sdio_readb(card->func, card->scratch_reg, &ret);
 	if (!ret)
-		scratch |= sdio_readb(card->func, reg + 1, &ret) << 8;
+		scratch |= sdio_readb(card->func, card->scratch_reg + 1,
+					&ret) << 8;
 
 	if (err)
 		*err = ret;
@@ -127,6 +157,46 @@ static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
 	return scratch;
 }
 
+static u8 if_sdio_read_rx_unit(struct if_sdio_card *card)
+{
+	int ret;
+	u8 rx_unit;
+
+	rx_unit = sdio_readb(card->func, IF_SDIO_RX_UNIT, &ret);
+
+	if (ret)
+		rx_unit = 0;
+
+	return rx_unit;
+}
+
+static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
+{
+	int ret;
+	u16 rx_len;
+
+	switch (card->model) {
+	case IF_SDIO_MODEL_8385:
+	case IF_SDIO_MODEL_8686:
+		rx_len = if_sdio_read_scratch(card, &ret);
+		break;
+	case IF_SDIO_MODEL_8688:
+	default: /* for newer chipsets */
+		rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
+		if (!ret)
+			rx_len <<= card->rx_unit;
+		else
+			rx_len = 0xffff;	/* invalid length */
+
+		break;
+	}
+
+	if (err)
+		*err = ret;
+
+	return rx_len;
+}
+
 static int if_sdio_handle_cmd(struct if_sdio_card *card,
 		u8 *buffer, unsigned size)
 {
@@ -207,7 +277,7 @@ static int if_sdio_handle_event(struct if_sdio_card *card,
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
-	if (card->model == 0x04) {
+	if (card->model == IF_SDIO_MODEL_8385) {
 		event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
 		if (ret)
 			goto out;
@@ -245,7 +315,7 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
-	size = if_sdio_read_scratch(card, &ret);
+	size = if_sdio_read_rx_len(card, &ret);
 	if (ret)
 		goto out;
 
@@ -488,7 +558,6 @@ static int if_sdio_prog_helper(struct if_sdio_card *card)
 	ret = 0;
 
 release:
-	sdio_set_block_size(card->func, 0);
 	sdio_release_host(card->func);
 	kfree(chunk_buffer);
 release_fw:
@@ -624,7 +693,6 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
 	ret = 0;
 
 release:
-	sdio_set_block_size(card->func, 0);
 	sdio_release_host(card->func);
 	kfree(chunk_buffer);
 release_fw:
@@ -653,6 +721,8 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
 	if (ret)
 		goto out;
 
+	lbs_deb_sdio("firmware status = %#x\n", scratch);
+
 	if (scratch == IF_SDIO_FIRMWARE_OK) {
 		lbs_deb_sdio("firmware already loaded\n");
 		goto success;
@@ -667,6 +737,9 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
 		goto out;
 
 success:
+	sdio_claim_host(card->func);
+	sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
+	sdio_release_host(card->func);
 	ret = 0;
 
 out:
@@ -820,10 +893,10 @@ static int if_sdio_probe(struct sdio_func *func,
 		if (sscanf(func->card->info[i],
 				"ID: %x", &model) == 1)
 			break;
-               if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
-                       model = 4;
-                       break;
-               }
+		if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
+			model = IF_SDIO_MODEL_8385;
+			break;
+		}
 	}
 
 	if (i == func->card->num_info) {
@@ -837,6 +910,20 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	card->func = func;
 	card->model = model;
+
+	switch (card->model) {
+	case IF_SDIO_MODEL_8385:
+		card->scratch_reg = IF_SDIO_SCRATCH_OLD;
+		break;
+	case IF_SDIO_MODEL_8686:
+		card->scratch_reg = IF_SDIO_SCRATCH;
+		break;
+	case IF_SDIO_MODEL_8688:
+	default: /* for newer chipsets */
+		card->scratch_reg = IF_SDIO_FW_STATUS;
+		break;
+	}
+
 	spin_lock_init(&card->lock);
 	card->workqueue = create_workqueue("libertas_sdio");
 	INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
@@ -914,15 +1001,40 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	priv->fw_ready = 1;
 
+	sdio_claim_host(func);
+
+	/*
+	 * Get rx_unit if the chip is SD8688 or newer.
+	 * SD8385 & SD8686 do not have rx_unit.
+	 */
+	if ((card->model != IF_SDIO_MODEL_8385)
+			&& (card->model != IF_SDIO_MODEL_8686))
+		card->rx_unit = if_sdio_read_rx_unit(card);
+	else
+		card->rx_unit = 0;
+
 	/*
 	 * Enable interrupts now that everything is set up
 	 */
-	sdio_claim_host(func);
 	sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
 	sdio_release_host(func);
 	if (ret)
 		goto reclaim;
 
+	/*
+	 * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
+	 */
+	if (card->model == IF_SDIO_MODEL_8688) {
+		struct cmd_header cmd;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		lbs_deb_sdio("send function INIT command\n");
+		if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
+				lbs_cmd_copyback, (unsigned long) &cmd))
+			lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
+	}
+
 	ret = lbs_start_card(priv);
 	if (ret)
 		goto err_activate_card;
@@ -968,6 +1080,22 @@ static void if_sdio_remove(struct sdio_func *func)
 
 	card = sdio_get_drvdata(func);
 
+	if (user_rmmod && (card->model == IF_SDIO_MODEL_8688)) {
+		/*
+		 * FUNC_SHUTDOWN is required for SD8688 WLAN/BT
+		 * multiple functions
+		 */
+		struct cmd_header cmd;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		lbs_deb_sdio("send function SHUTDOWN command\n");
+		if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
+				&cmd, sizeof(cmd), lbs_cmd_copyback,
+				(unsigned long) &cmd))
+			lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+	}
+
 	card->priv->surpriseremoved = 1;
 
 	lbs_deb_sdio("call remove card\n");
@@ -1015,6 +1143,9 @@ static int __init if_sdio_init_module(void)
 
 	ret = sdio_register_driver(&if_sdio_driver);
 
+	/* Clear the flag in case user removes the card. */
+	user_rmmod = 0;
+
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
 
 	return ret;
@@ -1024,6 +1155,9 @@ static void __exit if_sdio_exit_module(void)
 {
 	lbs_deb_enter(LBS_DEB_SDIO);
 
+	/* Set the flag as user is removing this module. */
+	user_rmmod = 1;
+
 	sdio_unregister_driver(&if_sdio_driver);
 
 	lbs_deb_leave(LBS_DEB_SDIO);
diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
index 533bdfbf5d2..60c9b2fcef0 100644
--- a/drivers/net/wireless/libertas/if_sdio.h
+++ b/drivers/net/wireless/libertas/if_sdio.h
@@ -12,6 +12,10 @@
 #ifndef _LBS_IF_SDIO_H
 #define _LBS_IF_SDIO_H
 
+#define IF_SDIO_MODEL_8385	0x04
+#define IF_SDIO_MODEL_8686	0x0b
+#define IF_SDIO_MODEL_8688	0x10
+
 #define IF_SDIO_IOPORT		0x00
 
 #define IF_SDIO_H_INT_MASK	0x04
@@ -38,8 +42,14 @@
 
 #define IF_SDIO_SCRATCH		0x34
 #define IF_SDIO_SCRATCH_OLD	0x80fe
+#define IF_SDIO_FW_STATUS	0x40
 #define   IF_SDIO_FIRMWARE_OK	0xfedc
 
+#define IF_SDIO_RX_LEN		0x42
+#define IF_SDIO_RX_UNIT		0x43
+
 #define IF_SDIO_EVENT           0x80fc
 
+#define IF_SDIO_BLOCK_SIZE	256
+
 #endif
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 07311e71af9..f8c2898d82b 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -19,7 +19,6 @@
 
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
-#include <linux/gpio.h>
 #include <linux/jiffies.h>
 #include <linux/kthread.h>
 #include <linux/list.h>
@@ -51,13 +50,6 @@ struct if_spi_card {
 	u16				card_id;
 	u8				card_rev;
 
-	/* Pin number for our GPIO chip-select. */
-	/* TODO: Once the generic SPI layer has some additional features, we
-	 * should take this out and use the normal chip select here.
-	 * We need support for chip select delays, and not dropping chipselect
-	 * after each word. */
-	int				gpio_cs;
-
 	/* The last time that we initiated an SPU operation */
 	unsigned long			prev_xfer_time;
 
@@ -119,9 +111,6 @@ static struct chip_ident chip_id_to_device_name[] = {
  * First we have to put a SPU register name on the bus. Then we can
  * either read from or write to that register.
  *
- * For 16-bit transactions, byte order on the bus is big-endian.
- * We don't have to worry about that here, though.
- * The translation takes place in the SPI routines.
  */
 
 static void spu_transaction_init(struct if_spi_card *card)
@@ -133,12 +122,10 @@ static void spu_transaction_init(struct if_spi_card *card)
 		 * If not, we have to busy-wait to be on the safe side. */
 		ndelay(400);
 	}
-	gpio_set_value(card->gpio_cs, 0); /* assert CS */
 }
 
 static void spu_transaction_finish(struct if_spi_card *card)
 {
-	gpio_set_value(card->gpio_cs, 1); /* drop CS */
 	card->prev_xfer_time = jiffies;
 }
 
@@ -147,7 +134,14 @@ static void spu_transaction_finish(struct if_spi_card *card)
 static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
 {
 	int err = 0;
-	u16 reg_out = reg | IF_SPI_WRITE_OPERATION_MASK;
+	u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
+	struct spi_message m;
+	struct spi_transfer reg_trans;
+	struct spi_transfer data_trans;
+
+	spi_message_init(&m);
+	memset(&reg_trans, 0, sizeof(reg_trans));
+	memset(&data_trans, 0, sizeof(data_trans));
 
 	/* You must give an even number of bytes to the SPU, even if it
 	 * doesn't care about the last one.  */
@@ -156,29 +150,26 @@ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
 	spu_transaction_init(card);
 
 	/* write SPU register index */
-	err = spi_write(card->spi, (u8 *)&reg_out, sizeof(u16));
-	if (err)
-		goto out;
+	reg_trans.tx_buf = &reg_out;
+	reg_trans.len = sizeof(reg_out);
 
-	err = spi_write(card->spi, buf, len);
+	data_trans.tx_buf = buf;
+	data_trans.len = len;
 
-out:
+	spi_message_add_tail(&reg_trans, &m);
+	spi_message_add_tail(&data_trans, &m);
+
+	err = spi_sync(card->spi, &m);
 	spu_transaction_finish(card);
 	return err;
 }
 
 static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
 {
-	return spu_write(card, reg, (u8 *)&val, sizeof(u16));
-}
+	u16 buff;
 
-static inline int spu_write_u32(struct if_spi_card *card, u16 reg, u32 val)
-{
-	/* The lower 16 bits are written first. */
-	u16 out[2];
-	out[0] = val & 0xffff;
-	out[1] = (val & 0xffff0000) >> 16;
-	return spu_write(card, reg, (u8 *)&out, sizeof(u32));
+	buff = cpu_to_le16(val);
+	return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
 }
 
 static inline int spu_reg_is_port_reg(u16 reg)
@@ -195,10 +186,13 @@ static inline int spu_reg_is_port_reg(u16 reg)
 
 static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
 {
-	unsigned int i, delay;
+	unsigned int delay;
 	int err = 0;
-	u16 zero = 0;
-	u16 reg_out = reg | IF_SPI_READ_OPERATION_MASK;
+	u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
+	struct spi_message m;
+	struct spi_transfer reg_trans;
+	struct spi_transfer dummy_trans;
+	struct spi_transfer data_trans;
 
 	/* You must take an even number of bytes from the SPU, even if you
 	 * don't care about the last one.  */
@@ -206,29 +200,34 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
 
 	spu_transaction_init(card);
 
+	spi_message_init(&m);
+	memset(&reg_trans, 0, sizeof(reg_trans));
+	memset(&dummy_trans, 0, sizeof(dummy_trans));
+	memset(&data_trans, 0, sizeof(data_trans));
+
 	/* write SPU register index */
-	err = spi_write(card->spi, (u8 *)&reg_out, sizeof(u16));
-	if (err)
-		goto out;
+	reg_trans.tx_buf = &reg_out;
+	reg_trans.len = sizeof(reg_out);
+	spi_message_add_tail(&reg_trans, &m);
 
 	delay = spu_reg_is_port_reg(reg) ? card->spu_port_delay :
 						card->spu_reg_delay;
 	if (card->use_dummy_writes) {
 		/* Clock in dummy cycles while the SPU fills the FIFO */
-		for (i = 0; i < delay / 16; ++i) {
-			err = spi_write(card->spi, (u8 *)&zero, sizeof(u16));
-			if (err)
-				return err;
-		}
+		dummy_trans.len = delay / 8;
+		spi_message_add_tail(&dummy_trans, &m);
 	} else {
 		/* Busy-wait while the SPU fills the FIFO */
-		ndelay(100 + (delay * 10));
+		reg_trans.delay_usecs =
+			DIV_ROUND_UP((100 + (delay * 10)), 1000);
 	}
 
 	/* read in data */
-	err = spi_read(card->spi, buf, len);
+	data_trans.rx_buf = buf;
+	data_trans.len = len;
+	spi_message_add_tail(&data_trans, &m);
 
-out:
+	err = spi_sync(card->spi, &m);
 	spu_transaction_finish(card);
 	return err;
 }
@@ -236,18 +235,25 @@ out:
 /* Read 16 bits from an SPI register */
 static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
 {
-	return spu_read(card, reg, (u8 *)val, sizeof(u16));
+	u16 buf;
+	int ret;
+
+	ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
+	if (ret == 0)
+		*val = le16_to_cpup(&buf);
+	return ret;
 }
 
 /* Read 32 bits from an SPI register.
  * The low 16 bits are read first. */
 static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
 {
-	u16 buf[2];
+	u32 buf;
 	int err;
-	err = spu_read(card, reg, (u8 *)buf, sizeof(u32));
+
+	err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
 	if (!err)
-		*val = buf[0] | (buf[1] << 16);
+		*val = le32_to_cpup(&buf);
 	return err;
 }
 
@@ -731,7 +737,7 @@ static int if_spi_c2h_data(struct if_spi_card *card)
 		goto out;
 	} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
 		lbs_pr_err("%s: error: card has %d bytes of data, but "
-			   "our maximum skb size is %u\n",
+			   "our maximum skb size is %lu\n",
 			   __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
 		err = -EINVAL;
 		goto out;
@@ -814,6 +820,13 @@ static void if_spi_e2h(struct if_spi_card *card)
 	if (err)
 		goto out;
 
+	/* re-enable the card event interrupt */
+	spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG,
+			~IF_SPI_HICU_CARD_EVENT);
+
+	/* generate a card interrupt */
+	spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
+
 	spin_lock_irqsave(&priv->driver_lock, flags);
 	lbs_queue_event(priv, cause & 0xff);
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
@@ -1020,6 +1033,7 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	struct libertas_spi_platform_data *pdata = spi->dev.platform_data;
 	int err = 0;
 	u32 scratch;
+	struct sched_param param = { .sched_priority = 1 };
 
 	lbs_deb_enter(LBS_DEB_SPI);
 
@@ -1043,7 +1057,6 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, card);
 	card->pdata = pdata;
 	card->spi = spi;
-	card->gpio_cs = pdata->gpio_cs;
 	card->prev_xfer_time = jiffies;
 
 	sema_init(&card->spi_ready, 0);
@@ -1052,26 +1065,18 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	INIT_LIST_HEAD(&card->data_packet_list);
 	spin_lock_init(&card->buffer_lock);
 
-	/* set up GPIO CS line. TODO: use  regular CS line */
-	err = gpio_request(card->gpio_cs, "if_spi_gpio_chip_select");
-	if (err)
-		goto free_card;
-	err = gpio_direction_output(card->gpio_cs, 1);
-	if (err)
-		goto free_gpio;
-
 	/* Initialize the SPI Interface Unit */
 	err = spu_init(card, pdata->use_dummy_writes);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 	err = spu_get_chip_revision(card, &card->card_id, &card->card_rev);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 
 	/* Firmware load */
 	err = spu_read_u32(card, IF_SPI_SCRATCH_4_REG, &scratch);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 	if (scratch == SUCCESSFUL_FW_DOWNLOAD_MAGIC)
 		lbs_deb_spi("Firmware is already loaded for "
 			    "Marvell WLAN 802.11 adapter\n");
@@ -1079,7 +1084,7 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 		err = if_spi_calculate_fw_names(card->card_id,
 				card->helper_fw_name, card->main_fw_name);
 		if (err)
-			goto free_gpio;
+			goto free_card;
 
 		lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter "
 				"(chip_id = 0x%04x, chip_rev = 0x%02x) "
@@ -1090,23 +1095,23 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 				spi->max_speed_hz);
 		err = if_spi_prog_helper_firmware(card);
 		if (err)
-			goto free_gpio;
+			goto free_card;
 		err = if_spi_prog_main_firmware(card);
 		if (err)
-			goto free_gpio;
+			goto free_card;
 		lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n");
 	}
 
 	err = spu_set_interrupt_mode(card, 0, 1);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 
 	/* Register our card with libertas.
 	 * This will call alloc_etherdev */
 	priv = lbs_add_card(card, &spi->dev);
 	if (!priv) {
 		err = -ENOMEM;
-		goto free_gpio;
+		goto free_card;
 	}
 	card->priv = priv;
 	priv->card = card;
@@ -1123,6 +1128,9 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 		lbs_pr_err("error creating SPI thread: err=%d\n", err);
 		goto remove_card;
 	}
+	if (sched_setscheduler(card->spi_thread, SCHED_FIFO, &param))
+		lbs_pr_err("Error setting scheduler, using default.\n");
+
 	err = request_irq(spi->irq, if_spi_host_interrupt,
 			IRQF_TRIGGER_FALLING, "libertas_spi", card);
 	if (err) {
@@ -1148,8 +1156,6 @@ terminate_thread:
 	if_spi_terminate_spi_thread(card);
 remove_card:
 	lbs_remove_card(priv); /* will call free_netdev */
-free_gpio:
-	gpio_free(card->gpio_cs);
 free_card:
 	free_if_spi_card(card);
 out:
@@ -1170,7 +1176,6 @@ static int __devexit libertas_spi_remove(struct spi_device *spi)
 	free_irq(spi->irq, card);
 	if_spi_terminate_spi_thread(card);
 	lbs_remove_card(priv); /* will call free_netdev */
-	gpio_free(card->gpio_cs);
 	if (card->pdata->teardown)
 		card->pdata->teardown(spi);
 	free_if_spi_card(card);
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index ea3dc038be7..d649caebf08 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -686,8 +686,7 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
 		return;
 	}
 
-	if (!in_interrupt())
-		BUG();
+	BUG_ON(!in_interrupt());
 
 	spin_lock(&priv->driver_lock);
 
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 8ae935ac32f..89575e44801 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1307,8 +1307,10 @@ int lbs_start_card(struct lbs_private *priv)
 
 	lbs_update_channel(priv);
 
-	/* 5.0.16p0 is known to NOT support any mesh */
-	if (priv->fwrelease > 0x05001000) {
+	/* Check mesh FW version and appropriately send the mesh start
+	 * command
+	 */
+	if (priv->mesh_fw_ver == MESH_FW_OLD) {
 		/* Enable mesh, if supported, and work out which TLV it uses.
 		   0x100 + 291 is an unofficial value used in 5.110.20.pXX
 		   0x100 + 37 is the official value used in 5.110.21.pXX
@@ -1322,27 +1324,35 @@ int lbs_start_card(struct lbs_private *priv)
 		   It's just that 5.110.20.pXX will not have done anything
 		   useful */
 
-		priv->mesh_tlv = 0x100 + 291;
+		priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
 		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
 				    priv->curbssparams.channel)) {
-			priv->mesh_tlv = 0x100 + 37;
+			priv->mesh_tlv = TLV_TYPE_MESH_ID;
 			if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
 					    priv->curbssparams.channel))
 				priv->mesh_tlv = 0;
 		}
-		if (priv->mesh_tlv) {
-			lbs_add_mesh(priv);
-
-			if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-				lbs_pr_err("cannot register lbs_mesh attribute\n");
-
-			/* While rtap isn't related to mesh, only mesh-enabled
-			 * firmware implements the rtap functionality via
-			 * CMD_802_11_MONITOR_MODE.
-			 */
-			if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
-				lbs_pr_err("cannot register lbs_rtap attribute\n");
-		}
+	} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+		/* 10.0.0.pXX new firmwares should succeed with TLV
+		 * 0x100+37; Do not invoke command with old TLV.
+		 */
+		priv->mesh_tlv = TLV_TYPE_MESH_ID;
+		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
+				    priv->curbssparams.channel))
+			priv->mesh_tlv = 0;
+	}
+	if (priv->mesh_tlv) {
+		lbs_add_mesh(priv);
+
+		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
+			lbs_pr_err("cannot register lbs_mesh attribute\n");
+
+		/* While rtap isn't related to mesh, only mesh-enabled
+		 * firmware implements the rtap functionality via
+		 * CMD_802_11_MONITOR_MODE.
+		 */
+		if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
+			lbs_pr_err("cannot register lbs_rtap attribute\n");
 	}
 
 	lbs_debugfs_init_one(priv, dev);
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 8e669775cb5..65f02cc6752 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -25,7 +25,6 @@ struct rfc1042hdr {
 } __attribute__ ((packed));
 
 struct rxpackethdr {
-	struct rxpd rx_pd;
 	struct eth803hdr eth803_hdr;
 	struct rfc1042hdr rfc1042_hdr;
 } __attribute__ ((packed));
@@ -158,10 +157,18 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 	if (priv->monitormode)
 		return process_rxed_802_11_packet(priv, skb);
 
-	p_rx_pkt = (struct rxpackethdr *) skb->data;
-	p_rx_pd = &p_rx_pkt->rx_pd;
-	if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME))
-		dev = priv->mesh_dev;
+	p_rx_pd = (struct rxpd *) skb->data;
+	p_rx_pkt = (struct rxpackethdr *) ((u8 *)p_rx_pd +
+		le32_to_cpu(p_rx_pd->pkt_ptr));
+	if (priv->mesh_dev) {
+		if (priv->mesh_fw_ver == MESH_FW_OLD) {
+			if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
+				dev = priv->mesh_dev;
+		} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+			if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID)
+				dev = priv->mesh_dev;
+		}
+	}
 
 	lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
 		 min_t(unsigned int, skb->len, 100));
@@ -174,20 +181,9 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 		goto done;
 	}
 
-	/*
-	 * Check rxpd status and update 802.3 stat,
-	 */
-	if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
-		lbs_deb_rx("rx err: frame received with bad status\n");
-		lbs_pr_alert("rxpd not ok\n");
-		dev->stats.rx_errors++;
-		ret = 0;
-		dev_kfree_skb(skb);
-		goto done;
-	}
-
-	lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
-	       skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
+	lbs_deb_rx("rx data: skb->len - pkt_ptr = %d-%zd = %zd\n",
+		skb->len, (size_t)le32_to_cpu(p_rx_pd->pkt_ptr),
+		skb->len - (size_t)le32_to_cpu(p_rx_pd->pkt_ptr));
 
 	lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
 		sizeof(p_rx_pkt->eth803_hdr.dest_addr));
@@ -221,14 +217,14 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 		/* Chop off the rxpd + the excess memory from the 802.2/llc/snap header
 		 *   that was removed
 		 */
-		hdrchop = (u8 *) p_ethhdr - (u8 *) p_rx_pkt;
+		hdrchop = (u8 *)p_ethhdr - (u8 *)p_rx_pd;
 	} else {
 		lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP",
 			(u8 *) & p_rx_pkt->rfc1042_hdr,
 			sizeof(p_rx_pkt->rfc1042_hdr));
 
 		/* Chop off the rxpd */
-		hdrchop = (u8 *) & p_rx_pkt->eth803_hdr - (u8 *) p_rx_pkt;
+		hdrchop = (u8 *)&p_rx_pkt->eth803_hdr - (u8 *)p_rx_pd;
 	}
 
 	/* Chop off the leading header bytes so the skb points to the start of
@@ -334,14 +330,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 		goto done;
 	}
 
-	/*
-	 * Check rxpd status and update 802.3 stat,
-	 */
-	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
-		//lbs_deb_rx("rx err: frame received with bad status\n");
-		dev->stats.rx_errors++;
-	}
-
 	lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
 	       skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
 
@@ -353,8 +341,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	radiotap_hdr.hdr.it_pad = 0;
 	radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
 	radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
-	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
-		radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS;
 	radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
 	/* XXX must check no carryout */
 	radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 8124db36aaf..601b5424967 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -27,12 +27,12 @@
                              + 40)	/* 40 for WPAIE */
 
 //! Memory needed to store a max sized channel List TLV for a firmware scan
-#define CHAN_TLV_MAX_SIZE  (sizeof(struct mrvlietypesheader)    \
+#define CHAN_TLV_MAX_SIZE  (sizeof(struct mrvl_ie_header)    \
                             + (MRVDRV_MAX_CHANNELS_PER_SCAN     \
                                * sizeof(struct chanscanparamset)))
 
 //! Memory needed to store a max number/size SSID TLV for a firmware scan
-#define SSID_TLV_MAX_SIZE  (1 * sizeof(struct mrvlietypes_ssidparamset))
+#define SSID_TLV_MAX_SIZE  (1 * sizeof(struct mrvl_ie_ssid_param_set))
 
 //! Maximum memory needed for a cmd_ds_802_11_scan with all TLVs at max
 #define MAX_SCAN_CFG_ALLOC (sizeof(struct cmd_ds_802_11_scan)	\
@@ -211,7 +211,7 @@ static int lbs_scan_create_channel_list(struct lbs_private *priv,
  */
 static int lbs_scan_add_ssid_tlv(struct lbs_private *priv, u8 *tlv)
 {
-	struct mrvlietypes_ssidparamset *ssid_tlv = (void *)tlv;
+	struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv;
 
 	ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID);
 	ssid_tlv->header.len = cpu_to_le16(priv->scan_ssid_len);
@@ -249,7 +249,7 @@ static int lbs_scan_add_chanlist_tlv(uint8_t *tlv,
 				     int chan_count)
 {
 	size_t size = sizeof(struct chanscanparamset) *chan_count;
-	struct mrvlietypes_chanlistparamset *chan_tlv = (void *)tlv;
+	struct mrvl_ie_chanlist_param_set *chan_tlv = (void *)tlv;
 
 	chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
 	memcpy(chan_tlv->chanscanparam, chan_list, size);
@@ -270,7 +270,7 @@ static int lbs_scan_add_chanlist_tlv(uint8_t *tlv,
 static int lbs_scan_add_rates_tlv(uint8_t *tlv)
 {
 	int i;
-	struct mrvlietypes_ratesparamset *rate_tlv = (void *)tlv;
+	struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
 
 	rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
 	tlv += sizeof(rate_tlv->header);
@@ -513,12 +513,12 @@ void lbs_scan_worker(struct work_struct *work)
 static int lbs_process_bss(struct bss_descriptor *bss,
 			   uint8_t **pbeaconinfo, int *bytesleft)
 {
-	struct ieeetypes_fhparamset *pFH;
-	struct ieeetypes_dsparamset *pDS;
-	struct ieeetypes_cfparamset *pCF;
-	struct ieeetypes_ibssparamset *pibss;
+	struct ieee_ie_fh_param_set *fh;
+	struct ieee_ie_ds_param_set *ds;
+	struct ieee_ie_cf_param_set *cf;
+	struct ieee_ie_ibss_param_set *ibss;
 	DECLARE_SSID_BUF(ssid);
-	struct ieeetypes_countryinfoset *pcountryinfo;
+	struct ieee_ie_country_info_set *pcountryinfo;
 	uint8_t *pos, *end, *p;
 	uint8_t n_ex_rates = 0, got_basic_rates = 0, n_basic_rates = 0;
 	uint16_t beaconsize = 0;
@@ -616,50 +616,49 @@ static int lbs_process_bss(struct bss_descriptor *bss,
 			break;
 
 		case WLAN_EID_FH_PARAMS:
-			pFH = (struct ieeetypes_fhparamset *) pos;
-			memmove(&bss->phyparamset.fhparamset, pFH,
-				sizeof(struct ieeetypes_fhparamset));
+			fh = (struct ieee_ie_fh_param_set *) pos;
+			memcpy(&bss->phy.fh, fh, sizeof(*fh));
 			lbs_deb_scan("got FH IE\n");
 			break;
 
 		case WLAN_EID_DS_PARAMS:
-			pDS = (struct ieeetypes_dsparamset *) pos;
-			bss->channel = pDS->currentchan;
-			memcpy(&bss->phyparamset.dsparamset, pDS,
-			       sizeof(struct ieeetypes_dsparamset));
+			ds = (struct ieee_ie_ds_param_set *) pos;
+			bss->channel = ds->channel;
+			memcpy(&bss->phy.ds, ds, sizeof(*ds));
 			lbs_deb_scan("got DS IE, channel %d\n", bss->channel);
 			break;
 
 		case WLAN_EID_CF_PARAMS:
-			pCF = (struct ieeetypes_cfparamset *) pos;
-			memcpy(&bss->ssparamset.cfparamset, pCF,
-			       sizeof(struct ieeetypes_cfparamset));
+			cf = (struct ieee_ie_cf_param_set *) pos;
+			memcpy(&bss->ss.cf, cf, sizeof(*cf));
 			lbs_deb_scan("got CF IE\n");
 			break;
 
 		case WLAN_EID_IBSS_PARAMS:
-			pibss = (struct ieeetypes_ibssparamset *) pos;
-			bss->atimwindow = le16_to_cpu(pibss->atimwindow);
-			memmove(&bss->ssparamset.ibssparamset, pibss,
-				sizeof(struct ieeetypes_ibssparamset));
+			ibss = (struct ieee_ie_ibss_param_set *) pos;
+			bss->atimwindow = ibss->atimwindow;
+			memcpy(&bss->ss.ibss, ibss, sizeof(*ibss));
 			lbs_deb_scan("got IBSS IE\n");
 			break;
 
 		case WLAN_EID_COUNTRY:
-			pcountryinfo = (struct ieeetypes_countryinfoset *) pos;
+			pcountryinfo = (struct ieee_ie_country_info_set *) pos;
 			lbs_deb_scan("got COUNTRY IE\n");
-			if (pcountryinfo->len < sizeof(pcountryinfo->countrycode)
-			    || pcountryinfo->len > 254) {
-				lbs_deb_scan("process_bss: 11D- Err CountryInfo len %d, min %zd, max 254\n",
-					     pcountryinfo->len, sizeof(pcountryinfo->countrycode));
+			if (pcountryinfo->header.len < sizeof(pcountryinfo->countrycode)
+			    || pcountryinfo->header.len > 254) {
+				lbs_deb_scan("%s: 11D- Err CountryInfo len %d, min %zd, max 254\n",
+					     __func__,
+					     pcountryinfo->header.len,
+					     sizeof(pcountryinfo->countrycode));
 				ret = -1;
 				goto done;
 			}
 
-			memcpy(&bss->countryinfo, pcountryinfo, pcountryinfo->len + 2);
+			memcpy(&bss->countryinfo, pcountryinfo,
+				pcountryinfo->header.len + 2);
 			lbs_deb_hex(LBS_DEB_SCAN, "process_bss: 11d countryinfo",
 				    (uint8_t *) pcountryinfo,
-				    (int) (pcountryinfo->len + 2));
+				    (int) (pcountryinfo->header.len + 2));
 			break;
 
 		case WLAN_EID_EXT_SUPP_RATES:
@@ -1130,7 +1129,7 @@ static int lbs_ret_80211_scan(struct lbs_private *priv, unsigned long dummy,
 		goto done;
 	}
 
-	bytesleft = le16_to_cpu(scanresp->bssdescriptsize);
+	bytesleft = get_unaligned_le16(&scanresp->bssdescriptsize);
 	lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft);
 
 	scanrespsize = le16_to_cpu(resp->size);
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index f10aa39a6b6..160cfd8311c 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -132,8 +132,12 @@ int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	txpd->tx_packet_length = cpu_to_le16(pkt_len);
 	txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
 
-	if (dev == priv->mesh_dev)
-		txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+	if (dev == priv->mesh_dev) {
+		if (priv->mesh_fw_ver == MESH_FW_OLD)
+			txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+		else if (priv->mesh_fw_ver == MESH_FW_NEW)
+			txpd->u.bss.bss_num = MESH_IFACE_ID;
+	}
 
 	lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));
 
diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h
index fb7a2d1a252..99905df65b2 100644
--- a/drivers/net/wireless/libertas/types.h
+++ b/drivers/net/wireless/libertas/types.h
@@ -8,9 +8,14 @@
 #include <asm/byteorder.h>
 #include <linux/wireless.h>
 
-struct ieeetypes_cfparamset {
-	u8 elementid;
+struct ieee_ie_header {
+	u8 id;
 	u8 len;
+} __attribute__ ((packed));
+
+struct ieee_ie_cf_param_set {
+	struct ieee_ie_header header;
+
 	u8 cfpcnt;
 	u8 cfpperiod;
 	__le16 cfpmaxduration;
@@ -18,42 +23,35 @@ struct ieeetypes_cfparamset {
 } __attribute__ ((packed));
 
 
-struct ieeetypes_ibssparamset {
-	u8 elementid;
-	u8 len;
+struct ieee_ie_ibss_param_set {
+	struct ieee_ie_header header;
+
 	__le16 atimwindow;
 } __attribute__ ((packed));
 
-union IEEEtypes_ssparamset {
-	struct ieeetypes_cfparamset cfparamset;
-	struct ieeetypes_ibssparamset ibssparamset;
+union ieee_ss_param_set {
+	struct ieee_ie_cf_param_set cf;
+	struct ieee_ie_ibss_param_set ibss;
 } __attribute__ ((packed));
 
-struct ieeetypes_fhparamset {
-	u8 elementid;
-	u8 len;
+struct ieee_ie_fh_param_set {
+	struct ieee_ie_header header;
+
 	__le16 dwelltime;
 	u8 hopset;
 	u8 hoppattern;
 	u8 hopindex;
 } __attribute__ ((packed));
 
-struct ieeetypes_dsparamset {
-	u8 elementid;
-	u8 len;
-	u8 currentchan;
-} __attribute__ ((packed));
+struct ieee_ie_ds_param_set {
+	struct ieee_ie_header header;
 
-union ieeetypes_phyparamset {
-	struct ieeetypes_fhparamset fhparamset;
-	struct ieeetypes_dsparamset dsparamset;
+	u8 channel;
 } __attribute__ ((packed));
 
-struct ieeetypes_assocrsp {
-	__le16 capability;
-	__le16 statuscode;
-	__le16 aid;
-	u8 iebuffer[1];
+union ieee_phy_param_set {
+	struct ieee_ie_fh_param_set fh;
+	struct ieee_ie_ds_param_set ds;
 } __attribute__ ((packed));
 
 /** TLV  type ID definition */
@@ -94,30 +92,33 @@ struct ieeetypes_assocrsp {
 #define TLV_TYPE_TSFTIMESTAMP	    (PROPRIETARY_TLV_BASE_ID + 19)
 #define TLV_TYPE_RSSI_HIGH          (PROPRIETARY_TLV_BASE_ID + 22)
 #define TLV_TYPE_SNR_HIGH           (PROPRIETARY_TLV_BASE_ID + 23)
+#define TLV_TYPE_AUTH_TYPE          (PROPRIETARY_TLV_BASE_ID + 31)
+#define TLV_TYPE_MESH_ID            (PROPRIETARY_TLV_BASE_ID + 37)
+#define TLV_TYPE_OLD_MESH_ID        (PROPRIETARY_TLV_BASE_ID + 291)
 
 /** TLV related data structures*/
-struct mrvlietypesheader {
+struct mrvl_ie_header {
 	__le16 type;
 	__le16 len;
 } __attribute__ ((packed));
 
-struct mrvlietypes_data {
-	struct mrvlietypesheader header;
+struct mrvl_ie_data {
+	struct mrvl_ie_header header;
 	u8 Data[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_ratesparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_rates_param_set {
+	struct mrvl_ie_header header;
 	u8 rates[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_ssidparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_ssid_param_set {
+	struct mrvl_ie_header header;
 	u8 ssid[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_wildcardssidparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_wildcard_ssid_param_set {
+	struct mrvl_ie_header header;
 	u8 MaxSsidlength;
 	u8 ssid[1];
 } __attribute__ ((packed));
@@ -142,91 +143,72 @@ struct chanscanparamset {
 	__le16 maxscantime;
 } __attribute__ ((packed));
 
-struct mrvlietypes_chanlistparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_chanlist_param_set {
+	struct mrvl_ie_header header;
 	struct chanscanparamset chanscanparam[1];
 } __attribute__ ((packed));
 
-struct cfparamset {
+struct mrvl_ie_cf_param_set {
+	struct mrvl_ie_header header;
 	u8 cfpcnt;
 	u8 cfpperiod;
 	__le16 cfpmaxduration;
 	__le16 cfpdurationremaining;
 } __attribute__ ((packed));
 
-struct ibssparamset {
-	__le16 atimwindow;
-} __attribute__ ((packed));
-
-struct mrvlietypes_ssparamset {
-	struct mrvlietypesheader header;
-	union {
-		struct cfparamset cfparamset[1];
-		struct ibssparamset ibssparamset[1];
-	} cf_ibss;
+struct mrvl_ie_ds_param_set {
+	struct mrvl_ie_header header;
+	u8 channel;
 } __attribute__ ((packed));
 
-struct fhparamset {
-	__le16 dwelltime;
-	u8 hopset;
-	u8 hoppattern;
-	u8 hopindex;
-} __attribute__ ((packed));
-
-struct dsparamset {
-	u8 currentchan;
-} __attribute__ ((packed));
-
-struct mrvlietypes_phyparamset {
-	struct mrvlietypesheader header;
-	union {
-		struct fhparamset fhparamset[1];
-		struct dsparamset dsparamset[1];
-	} fh_ds;
-} __attribute__ ((packed));
-
-struct mrvlietypes_rsnparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_rsn_param_set {
+	struct mrvl_ie_header header;
 	u8 rsnie[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_tsftimestamp {
-	struct mrvlietypesheader header;
+struct mrvl_ie_tsf_timestamp {
+	struct mrvl_ie_header header;
 	__le64 tsftable[1];
 } __attribute__ ((packed));
 
+/* v9 and later firmware only */
+struct mrvl_ie_auth_type {
+	struct mrvl_ie_header header;
+	__le16 auth;
+} __attribute__ ((packed));
+
 /**  Local Power capability */
-struct mrvlietypes_powercapability {
-	struct mrvlietypesheader header;
+struct mrvl_ie_power_capability {
+	struct mrvl_ie_header header;
 	s8 minpower;
 	s8 maxpower;
 } __attribute__ ((packed));
 
 /* used in CMD_802_11_SUBSCRIBE_EVENT for SNR, RSSI and Failure */
-struct mrvlietypes_thresholds {
-	struct mrvlietypesheader header;
+struct mrvl_ie_thresholds {
+	struct mrvl_ie_header header;
 	u8 value;
 	u8 freq;
 } __attribute__ ((packed));
 
-struct mrvlietypes_beaconsmissed {
-	struct mrvlietypesheader header;
+struct mrvl_ie_beacons_missed {
+	struct mrvl_ie_header header;
 	u8 beaconmissed;
 	u8 reserved;
 } __attribute__ ((packed));
 
-struct mrvlietypes_numprobes {
-	struct mrvlietypesheader header;
+struct mrvl_ie_num_probes {
+	struct mrvl_ie_header header;
 	__le16 numprobes;
 } __attribute__ ((packed));
 
-struct mrvlietypes_bcastprobe {
-	struct mrvlietypesheader header;
+struct mrvl_ie_bcast_probe {
+	struct mrvl_ie_header header;
 	__le16 bcastprobe;
 } __attribute__ ((packed));
 
-struct mrvlietypes_numssidprobe {
-	struct mrvlietypesheader header;
+struct mrvl_ie_num_ssid_probe {
+	struct mrvl_ie_header header;
 	__le16 numssidprobe;
 } __attribute__ ((packed));
 
@@ -235,8 +217,8 @@ struct led_pin {
 	u8 pin;
 } __attribute__ ((packed));
 
-struct mrvlietypes_ledgpio {
-	struct mrvlietypesheader header;
+struct mrvl_ie_ledgpio {
+	struct mrvl_ie_header header;
 	struct led_pin ledpin[1];
 } __attribute__ ((packed));
 
@@ -248,8 +230,8 @@ struct led_bhv {
 } __attribute__ ((packed));
 
 
-struct mrvlietypes_ledbhv {
-	struct mrvlietypesheader header;
+struct mrvl_ie_ledbhv {
+	struct mrvl_ie_header header;
 	struct led_bhv ledbhv[1];
 } __attribute__ ((packed));
 
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index 59634c33b1f..392337b37b1 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -461,8 +461,7 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
 		return;
 	}
 
-	if (!in_interrupt())
-		BUG();
+	BUG_ON(!in_interrupt());
 
 	spin_lock(&priv->driver_lock);
 	memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN,
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index e7289e2e7f1..10a99e26d39 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -366,36 +366,6 @@ static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed)
 	return 0;
 }
 
-static int lbtf_op_config_interface(struct ieee80211_hw *hw,
-			struct ieee80211_vif *vif,
-			struct ieee80211_if_conf *conf)
-{
-	struct lbtf_private *priv = hw->priv;
-	struct sk_buff *beacon;
-
-	switch (priv->vif->type) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_MESH_POINT:
-		beacon = ieee80211_beacon_get(hw, vif);
-		if (beacon) {
-			lbtf_beacon_set(priv, beacon);
-			kfree_skb(beacon);
-			lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int);
-		}
-		break;
-	default:
-		break;
-	}
-
-	if (conf->bssid) {
-		u8 null_bssid[ETH_ALEN] = {0};
-		bool activate = compare_ether_addr(conf->bssid, null_bssid);
-		lbtf_set_bssid(priv, activate, conf->bssid);
-	}
-
-	return 0;
-}
-
 #define SUPPORTED_FIF_FLAGS  (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)
 static void lbtf_op_configure_filter(struct ieee80211_hw *hw,
 			unsigned int changed_flags,
@@ -451,6 +421,29 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
 			u32 changes)
 {
 	struct lbtf_private *priv = hw->priv;
+	struct sk_buff *beacon;
+
+	if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_INT)) {
+		switch (priv->vif->type) {
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
+			beacon = ieee80211_beacon_get(hw, vif);
+			if (beacon) {
+				lbtf_beacon_set(priv, beacon);
+				kfree_skb(beacon);
+				lbtf_beacon_ctrl(priv, 1,
+						 bss_conf->beacon_int);
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (changes & BSS_CHANGED_BSSID) {
+		bool activate = !is_zero_ether_addr(bss_conf->bssid);
+		lbtf_set_bssid(priv, activate, bss_conf->bssid);
+	}
 
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
 		if (bss_conf->use_short_preamble)
@@ -459,8 +452,6 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
 			priv->preamble = CMD_TYPE_LONG_PREAMBLE;
 		lbtf_set_radio_control(priv);
 	}
-
-	return;
 }
 
 static const struct ieee80211_ops lbtf_ops = {
@@ -470,7 +461,6 @@ static const struct ieee80211_ops lbtf_ops = {
 	.add_interface		= lbtf_op_add_interface,
 	.remove_interface	= lbtf_op_remove_interface,
 	.config			= lbtf_op_config,
-	.config_interface	= lbtf_op_config_interface,
 	.configure_filter	= lbtf_op_configure_filter,
 	.bss_info_changed	= lbtf_op_bss_info_changed,
 };
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index d4fdc8b7d7d..e789c6e9938 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -280,7 +280,6 @@ struct mac80211_hwsim_data {
 	struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)];
 
 	struct ieee80211_channel *channel;
-	int radio_enabled;
 	unsigned long beacon_int; /* in jiffies unit */
 	unsigned int rx_filter;
 	int started;
@@ -291,6 +290,14 @@ struct mac80211_hwsim_data {
 	bool ps_poll_pending;
 	struct dentry *debugfs;
 	struct dentry *debugfs_ps;
+
+	/*
+	 * Only radios in the same group can communicate together (the
+	 * channel has to match too). Each bit represents a group. A
+	 * radio can be in more then one group.
+	 */
+	u64 group;
+	struct dentry *debugfs_group;
 };
 
 
@@ -410,9 +417,9 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 		if (data == data2)
 			continue;
 
-		if (!data2->started || !data2->radio_enabled ||
-		    !hwsim_ps_rx_ok(data2, skb) ||
-		    data->channel->center_freq != data2->channel->center_freq)
+		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		    data->channel->center_freq != data2->channel->center_freq ||
+		    !(data->group & data2->group))
 			continue;
 
 		nskb = skb_copy(skb, GFP_ATOMIC);
@@ -432,7 +439,6 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 
 static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
-	struct mac80211_hwsim_data *data = hw->priv;
 	bool ack;
 	struct ieee80211_tx_info *txi;
 
@@ -444,13 +450,6 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		return NETDEV_TX_OK;
 	}
 
-	if (!data->radio_enabled) {
-		printk(KERN_DEBUG "%s: dropped TX frame since radio "
-		       "disabled\n", wiphy_name(hw->wiphy));
-		dev_kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
 	ack = mac80211_hwsim_tx_frame(hw, skb);
 
 	txi = IEEE80211_SKB_CB(skb);
@@ -537,7 +536,7 @@ static void mac80211_hwsim_beacon(unsigned long arg)
 	struct ieee80211_hw *hw = (struct ieee80211_hw *) arg;
 	struct mac80211_hwsim_data *data = hw->priv;
 
-	if (!data->started || !data->radio_enabled)
+	if (!data->started)
 		return;
 
 	ieee80211_iterate_active_interfaces_atomic(
@@ -553,18 +552,14 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 	struct mac80211_hwsim_data *data = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 
-	printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
+	printk(KERN_DEBUG "%s:%s (freq=%d idle=%d ps=%d)\n",
 	       wiphy_name(hw->wiphy), __func__,
-	       conf->channel->center_freq, conf->radio_enabled,
-	       conf->beacon_int);
+	       conf->channel->center_freq,
+	       !!(conf->flags & IEEE80211_CONF_IDLE),
+	       !!(conf->flags & IEEE80211_CONF_PS));
 
 	data->channel = conf->channel;
-	data->radio_enabled = conf->radio_enabled;
-	data->beacon_int = 1024 * conf->beacon_int / 1000 * HZ / 1000;
-	if (data->beacon_int < 1)
-		data->beacon_int = 1;
-
-	if (!data->started || !data->radio_enabled)
+	if (!data->started || !data->beacon_int)
 		del_timer(&data->beacon_timer);
 	else
 		mod_timer(&data->beacon_timer, jiffies + data->beacon_int);
@@ -592,35 +587,26 @@ static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw,
 	*total_flags = data->rx_filter;
 }
 
-static int mac80211_hwsim_config_interface(struct ieee80211_hw *hw,
-					   struct ieee80211_vif *vif,
-					   struct ieee80211_if_conf *conf)
-{
-	struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
-
-	hwsim_check_magic(vif);
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		DECLARE_MAC_BUF(mac);
-		printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
-		       wiphy_name(hw->wiphy), __func__,
-		       conf->bssid);
-		memcpy(vp->bssid, conf->bssid, ETH_ALEN);
-	}
-	return 0;
-}
-
 static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 					    struct ieee80211_vif *vif,
 					    struct ieee80211_bss_conf *info,
 					    u32 changed)
 {
 	struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
+	struct mac80211_hwsim_data *data = hw->priv;
 
 	hwsim_check_magic(vif);
 
 	printk(KERN_DEBUG "%s:%s(changed=0x%x)\n",
 	       wiphy_name(hw->wiphy), __func__, changed);
 
+	if (changed & BSS_CHANGED_BSSID) {
+		printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
+		       wiphy_name(hw->wiphy), __func__,
+		       info->bssid);
+		memcpy(vp->bssid, info->bssid, ETH_ALEN);
+	}
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		printk(KERN_DEBUG "  %s: ASSOC: assoc=%d aid=%d\n",
 		       wiphy_name(hw->wiphy), info->assoc, info->aid);
@@ -628,6 +614,14 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 		vp->aid = info->aid;
 	}
 
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		printk(KERN_DEBUG "  %s: BCNINT: %d\n",
+		       wiphy_name(hw->wiphy), info->beacon_int);
+		data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
+		if (WARN_ON(!data->beacon_int))
+			data->beacon_int = 1;
+	}
+
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
 		printk(KERN_DEBUG "  %s: ERP_CTS_PROT: %d\n",
 		       wiphy_name(hw->wiphy), info->use_cts_prot);
@@ -646,7 +640,7 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_HT) {
 		printk(KERN_DEBUG "  %s: HT: op_mode=0x%x\n",
 		       wiphy_name(hw->wiphy),
-		       info->ht.operation_mode);
+		       info->ht_operation_mode);
 	}
 
 	if (changed & BSS_CHANGED_BASIC_RATES) {
@@ -704,7 +698,6 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 	.remove_interface = mac80211_hwsim_remove_interface,
 	.config = mac80211_hwsim_config,
 	.configure_filter = mac80211_hwsim_configure_filter,
-	.config_interface = mac80211_hwsim_config_interface,
 	.bss_info_changed = mac80211_hwsim_bss_info_changed,
 	.sta_notify = mac80211_hwsim_sta_notify,
 	.set_tim = mac80211_hwsim_set_tim,
@@ -725,6 +718,7 @@ static void mac80211_hwsim_free(void)
 	spin_unlock_bh(&hwsim_radio_lock);
 
 	list_for_each_entry(data, &tmplist, list) {
+		debugfs_remove(data->debugfs_group);
 		debugfs_remove(data->debugfs_ps);
 		debugfs_remove(data->debugfs);
 		ieee80211_unregister_hw(data->hw);
@@ -782,8 +776,7 @@ static void hwsim_send_ps_poll(void *dat, u8 *mac, struct ieee80211_vif *vif)
 	pspoll->aid = cpu_to_le16(0xc000 | vp->aid);
 	memcpy(pspoll->bssid, vp->bssid, ETH_ALEN);
 	memcpy(pspoll->ta, mac, ETH_ALEN);
-	if (data->radio_enabled &&
-	    !mac80211_hwsim_tx_frame(data->hw, skb))
+	if (!mac80211_hwsim_tx_frame(data->hw, skb))
 		printk(KERN_DEBUG "%s: PS-Poll frame not ack'ed\n", __func__);
 	dev_kfree_skb(skb);
 }
@@ -814,8 +807,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,
 	memcpy(hdr->addr1, vp->bssid, ETH_ALEN);
 	memcpy(hdr->addr2, mac, ETH_ALEN);
 	memcpy(hdr->addr3, vp->bssid, ETH_ALEN);
-	if (data->radio_enabled &&
-	    !mac80211_hwsim_tx_frame(data->hw, skb))
+	if (!mac80211_hwsim_tx_frame(data->hw, skb))
 		printk(KERN_DEBUG "%s: nullfunc frame not ack'ed\n", __func__);
 	dev_kfree_skb(skb);
 }
@@ -877,6 +869,24 @@ DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_ps, hwsim_fops_ps_read, hwsim_fops_ps_write,
 			"%llu\n");
 
 
+static int hwsim_fops_group_read(void *dat, u64 *val)
+{
+	struct mac80211_hwsim_data *data = dat;
+	*val = data->group;
+	return 0;
+}
+
+static int hwsim_fops_group_write(void *dat, u64 val)
+{
+	struct mac80211_hwsim_data *data = dat;
+	data->group = val;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_group,
+			hwsim_fops_group_read, hwsim_fops_group_write,
+			"%llx\n");
+
 static int __init init_mac80211_hwsim(void)
 {
 	int i, err = 0;
@@ -981,6 +991,8 @@ static int __init init_mac80211_hwsim(void)
 
 			hw->wiphy->bands[band] = sband;
 		}
+		/* By default all radios are belonging to the first group */
+		data->group = 1;
 
 		/* Work to be done prior to ieee80211_register_hw() */
 		switch (regtest) {
@@ -1105,6 +1117,9 @@ static int __init init_mac80211_hwsim(void)
 		data->debugfs_ps = debugfs_create_file("ps", 0666,
 						       data->debugfs, data,
 						       &hwsim_fops_ps);
+		data->debugfs_group = debugfs_create_file("group", 0666,
+							data->debugfs, data,
+							&hwsim_fops_group);
 
 		setup_timer(&data->beacon_timer, mac80211_hwsim_beacon,
 			    (unsigned long) hw);
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a9a970469c2..a263d5c84c0 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2369,7 +2369,7 @@ static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
 	if (info->use_cts_prot) {
 		prot_mode = MWL8K_FRAME_PROT_11G;
 	} else {
-		switch (info->ht.operation_mode &
+		switch (info->ht_operation_mode &
 			IEEE80211_HT_OP_MODE_PROTECTION) {
 		case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
 			prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
@@ -3089,19 +3089,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	return rc ? -EINVAL : 0;
 }
 
-static int mwl8k_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				  struct ieee80211_if_conf *conf)
-{
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
-	u32 changed = conf->changed;
-
-	if (changed & IEEE80211_IFCC_BSSID)
-		memcpy(mv_vif->bssid, conf->bssid, IEEE80211_ADDR_LEN);
-
-	return 0;
-}
-
 struct mwl8k_bss_info_changed_worker {
 	struct mwl8k_work_struct header;
 	struct ieee80211_vif *vif;
@@ -3183,8 +3170,12 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct mwl8k_bss_info_changed_worker *worker;
 	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	int rc;
 
+	if (changed & BSS_CHANGED_BSSID)
+		memcpy(mv_vif->bssid, info->bssid, IEEE80211_ADDR_LEN);
+
 	if ((changed & BSS_CHANGED_ASSOC) == 0)
 		return;
 
@@ -3442,7 +3433,6 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.add_interface		= mwl8k_add_interface,
 	.remove_interface	= mwl8k_remove_interface,
 	.config			= mwl8k_config,
-	.config_interface	= mwl8k_config_interface,
 	.bss_info_changed	= mwl8k_bss_info_changed,
 	.configure_filter	= mwl8k_configure_filter,
 	.set_rts_threshold	= mwl8k_set_rts_threshold,
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index ecf8b6ed5a4..db3df947d8e 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -125,6 +125,7 @@ struct p54_led_dev {
 	struct led_classdev led_dev;
 	char name[P54_LED_MAX_NAME_LEN + 1];
 
+	unsigned int toggled;
 	unsigned int index;
 	unsigned int registered;
 };
@@ -133,55 +134,74 @@ struct p54_led_dev {
 
 struct p54_common {
 	struct ieee80211_hw *hw;
-	u32 rx_start;
-	u32 rx_end;
-	struct sk_buff_head tx_queue;
+	struct ieee80211_vif *vif;
 	void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb);
 	int (*open)(struct ieee80211_hw *dev);
 	void (*stop)(struct ieee80211_hw *dev);
-	int mode;
+	struct sk_buff_head tx_queue;
+	struct mutex conf_mutex;
+
+	/* memory management (as seen by the firmware) */
+	u32 rx_start;
+	u32 rx_end;
 	u16 rx_mtu;
 	u8 headroom;
 	u8 tailroom;
-	struct mutex conf_mutex;
-	u8 mac_addr[ETH_ALEN];
-	u8 bssid[ETH_ALEN];
+
+	/* firmware/hardware info */
+	unsigned int tx_hdr_len;
+	unsigned int fw_var;
+	unsigned int fw_interface;
+	u8 version;
+
+	/* (e)DCF / QOS state */
+	bool use_short_slot;
+	struct ieee80211_tx_queue_stats tx_stats[8];
+	struct p54_edcf_queue_param qos_params[8];
+
+	/* Radio data */
+	u16 rxhw;
 	u8 rx_diversity_mask;
 	u8 tx_diversity_mask;
+	unsigned int output_power;
+	int noise;
+	/* calibration, output power limit and rssi<->dBm conversation data */
 	struct pda_iq_autocal_entry *iq_autocal;
 	unsigned int iq_autocal_len;
-	struct p54_cal_database *output_limit;
 	struct p54_cal_database *curve_data;
+	struct p54_cal_database *output_limit;
 	struct p54_rssi_linear_approximation rssical_db[IEEE80211_NUM_BANDS];
+
+	/* BBP/MAC state */
+	u8 mac_addr[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	u16 wakeup_timer;
 	unsigned int filter_flags;
-	bool use_short_slot;
-	u16 rxhw;
-	u8 version;
-	unsigned int tx_hdr_len;
-	unsigned int fw_var;
-	unsigned int fw_interface;
-	unsigned int output_power;
-	u32 tsf_low32;
-	u32 tsf_high32;
+	int mode;
+	u32 tsf_low32, tsf_high32;
 	u32 basic_rate_mask;
-	u16 wakeup_timer;
 	u16 aid;
-	struct ieee80211_tx_queue_stats tx_stats[8];
-	struct p54_edcf_queue_param qos_params[8];
-	struct ieee80211_low_level_stats stats;
-	struct delayed_work work;
 	struct sk_buff *cached_beacon;
-	int noise;
-	void *eeprom;
-	struct completion eeprom_comp;
+
+	/* cryptographic engine information */
 	u8 privacy_caps;
 	u8 rx_keycache_size;
+	unsigned long *used_rxkeys;
+
 	/* LED management */
 #ifdef CONFIG_P54_LEDS
-	struct p54_led_dev assoc_led;
-	struct p54_led_dev tx_led;
+	struct p54_led_dev leds[4];
+	struct delayed_work led_work;
 #endif /* CONFIG_P54_LEDS */
 	u16 softled_state;		/* bit field of glowing LEDs */
+
+	/* statistics */
+	struct ieee80211_low_level_stats stats;
+	struct delayed_work work;
+
+	/* eeprom handling */
+	void *eeprom;
+	struct completion eeprom_comp;
 };
 
 int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index c8f0232ee5e..b618bd14583 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -249,7 +249,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 		dev->queues = P54_QUEUE_AC_NUM;
 	}
 
-	if (!modparam_nohwcrypt)
+	if (!modparam_nohwcrypt) {
 		printk(KERN_INFO "%s: cryptographic accelerator "
 				 "WEP:%s, TKIP:%s, CCMP:%s\n",
 			wiphy_name(dev->wiphy),
@@ -259,6 +259,26 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 			(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
 			"YES" : "no");
 
+		if (priv->rx_keycache_size) {
+			/*
+			 * NOTE:
+			 *
+			 * The firmware provides at most 255 (0 - 254) slots
+			 * for keys which are then used to offload decryption.
+			 * As a result the 255 entry (aka 0xff) can be used
+			 * safely by the driver to mark keys that didn't fit
+			 * into the full cache. This trick saves us from
+			 * keeping a extra list for uploaded keys.
+			 */
+
+			priv->used_rxkeys = kzalloc(BITS_TO_LONGS(
+				priv->rx_keycache_size), GFP_KERNEL);
+
+			if (!priv->used_rxkeys)
+				return -ENOMEM;
+		}
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(p54_parse_firmware);
@@ -749,8 +769,6 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 	rx_status.signal = p54_rssi_to_dbm(dev, hdr->rssi);
 	rx_status.noise = priv->noise;
-	/* XX correct? */
-	rx_status.qual = (100 * hdr->rssi) / 127;
 	if (hdr->rate & 0x10)
 		rx_status.flag |= RX_FLAG_SHORTPRE;
 	if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
@@ -804,44 +822,37 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct ieee80211_tx_info *info;
 	struct p54_tx_info *range;
 	unsigned long flags;
-	u32 freed = 0, last_addr = priv->rx_start;
 
-	if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
+	if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
 		return;
 
-	/*
-	 * don't try to free an already unlinked skb
+	/* There used to be a check here to see if the SKB was on the
+	 * TX queue or not.  This can never happen because all SKBs we
+	 * see here successfully went through p54_assign_address()
+	 * which means the SKB is on the ->tx_queue.
 	 */
-	if (unlikely((!skb->next) || (!skb->prev)))
-		return;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
 	info = IEEE80211_SKB_CB(skb);
 	range = (void *)info->rate_driver_data;
-	if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
+	if (!skb_queue_is_first(&priv->tx_queue, skb)) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb->prev);
+		ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
-		last_addr = mr->end_addr;
 	}
-	if (skb->next != (struct sk_buff *)&priv->tx_queue) {
+	if (!skb_queue_is_last(&priv->tx_queue, skb)) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb->next);
+		ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
-		freed = mr->start_addr - last_addr;
-	} else
-		freed = priv->rx_end - last_addr;
+	}
 	__skb_unlink(skb, &priv->tx_queue);
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	dev_kfree_skb_any(skb);
-
-	if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
-		     IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
-		p54_wake_free_queues(dev);
+	p54_wake_free_queues(dev);
 }
 EXPORT_SYMBOL_GPL(p54_free_skb);
 
@@ -853,15 +864,13 @@ static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	entry = priv->tx_queue.next;
-	while (entry != (struct sk_buff *)&priv->tx_queue) {
+	skb_queue_walk(&priv->tx_queue, entry) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
 		if (hdr->req_id == req_id) {
 			spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 			return entry;
 		}
-		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	return NULL;
@@ -875,37 +884,29 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct sk_buff *entry;
 	u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
 	struct p54_tx_info *range = NULL;
-	u32 freed = 0;
-	u32 last_addr = priv->rx_start;
 	unsigned long flags;
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	entry = (struct sk_buff *) priv->tx_queue.next;
-	while (entry != (struct sk_buff *)&priv->tx_queue) {
+	skb_queue_walk(&priv->tx_queue, entry) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
 		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
-		if (range->start_addr != addr) {
-			last_addr = range->end_addr;
-			entry = entry->next;
+		if (range->start_addr != addr)
 			continue;
-		}
 
-		if (entry->next != (struct sk_buff *)&priv->tx_queue) {
+		if (!skb_queue_is_last(&priv->tx_queue, entry)) {
 			struct ieee80211_tx_info *ni;
 			struct p54_tx_info *mr;
 
-			ni = IEEE80211_SKB_CB(entry->next);
+			ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
+							     entry));
 			mr = (struct p54_tx_info *)ni->rate_driver_data;
-			freed = mr->start_addr - last_addr;
-		} else
-			freed = priv->rx_end - last_addr;
+		}
 
-		last_addr = range->end_addr;
 		__skb_unlink(entry, &priv->tx_queue);
 		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
@@ -992,9 +993,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 out:
-	if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
-		     IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
-		p54_wake_free_queues(dev);
+	p54_wake_free_queues(dev);
 }
 
 static void p54_rx_eeprom_readback(struct ieee80211_hw *dev,
@@ -1044,6 +1043,7 @@ static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
+	struct p54_common *priv = dev->priv;
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 	struct p54_trap *trap = (struct p54_trap *) hdr->data;
 	u16 event = le16_to_cpu(trap->event);
@@ -1057,6 +1057,8 @@ static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb)
 			wiphy_name(dev->wiphy), freq);
 		break;
 	case P54_TRAP_NO_BEACON:
+		if (priv->vif)
+			ieee80211_beacon_loss(priv->vif);
 		break;
 	case P54_TRAP_SCAN:
 		break;
@@ -1162,23 +1164,21 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		}
 	}
 
-	entry = priv->tx_queue.next;
-	while (left--) {
+	skb_queue_walk(&priv->tx_queue, entry) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
 		range = (void *)info->rate_driver_data;
 		hole_size = range->start_addr - last_addr;
 		if (!target_skb && hole_size >= len) {
-			target_skb = entry->prev;
+			target_skb = skb_queue_prev(&priv->tx_queue, entry);
 			hole_size -= len;
 			target_addr = last_addr;
 		}
 		largest_hole = max(largest_hole, hole_size);
 		last_addr = range->end_addr;
-		entry = entry->next;
 	}
 	if (!target_skb && priv->rx_end - last_addr >= len) {
-		target_skb = priv->tx_queue.prev;
+		target_skb = skb_peek_tail(&priv->tx_queue);
 		largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
 		if (!skb_queue_empty(&priv->tx_queue)) {
 			info = IEEE80211_SKB_CB(target_skb);
@@ -1452,7 +1452,8 @@ static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb,
 
 		if (info->control.sta)
 			*aid = info->control.sta->aid;
-		else
+
+		if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
 			*flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
 		break;
 	}
@@ -1939,7 +1940,8 @@ static int p54_set_ps(struct ieee80211_hw *dev)
 	int i;
 
 	if (dev->conf.flags & IEEE80211_CONF_PS)
-		mode = P54_PSM | P54_PSM_DTIM | P54_PSM_MCBC;
+		mode = P54_PSM | P54_PSM_BEACON_TIMEOUT | P54_PSM_DTIM |
+		       P54_PSM_CHECKSUM | P54_PSM_MCBC;
 	else
 		mode = P54_PSM_CAM;
 
@@ -1957,9 +1959,10 @@ static int p54_set_ps(struct ieee80211_hw *dev)
 		psm->intervals[i].periods = cpu_to_le16(1);
 	}
 
-	psm->beacon_rssi_skip_max = 60;
+	psm->beacon_rssi_skip_max = 200;
 	psm->rssi_delta_threshold = 0;
-	psm->nr = 0;
+	psm->nr = 10;
+	psm->exclude[0] = 0;
 
 	priv->tx(dev, skb);
 
@@ -2081,20 +2084,21 @@ out:
 static void p54_stop(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *skb;
 
 	mutex_lock(&priv->conf_mutex);
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
 	priv->softled_state = 0;
 	p54_set_leds(dev);
 
+#ifdef CONFIG_P54_LEDS
+	cancel_delayed_work_sync(&priv->led_work);
+#endif /* CONFIG_P54_LEDS */
 	cancel_delayed_work_sync(&priv->work);
 	if (priv->cached_beacon)
 		p54_tx_cancel(dev, priv->cached_beacon);
 
 	priv->stop(dev);
-	while ((skb = skb_dequeue(&priv->tx_queue)))
-		kfree_skb(skb);
+	skb_queue_purge(&priv->tx_queue);
 	priv->cached_beacon = NULL;
 	priv->tsf_high32 = priv->tsf_low32 = 0;
 	mutex_unlock(&priv->conf_mutex);
@@ -2111,6 +2115,8 @@ static int p54_add_interface(struct ieee80211_hw *dev,
 		return -EOPNOTSUPP;
 	}
 
+	priv->vif = conf->vif;
+
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
@@ -2135,6 +2141,7 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 	struct p54_common *priv = dev->priv;
 
 	mutex_lock(&priv->conf_mutex);
+	priv->vif = NULL;
 	if (priv->cached_beacon)
 		p54_tx_cancel(dev, priv->cached_beacon);
 	priv->mode = NL80211_IFTYPE_MONITOR;
@@ -2174,41 +2181,6 @@ out:
 	return ret;
 }
 
-static int p54_config_interface(struct ieee80211_hw *dev,
-				struct ieee80211_vif *vif,
-				struct ieee80211_if_conf *conf)
-{
-	struct p54_common *priv = dev->priv;
-	int ret = 0;
-
-	mutex_lock(&priv->conf_mutex);
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-		ret = p54_setup_mac(dev);
-		if (ret)
-			goto out;
-	}
-
-	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		ret = p54_scan(dev, P54_SCAN_EXIT, 0);
-		if (ret)
-			goto out;
-		ret = p54_setup_mac(dev);
-		if (ret)
-			goto out;
-		ret = p54_beacon_update(dev, vif);
-		if (ret)
-			goto out;
-		ret = p54_set_edcf(dev);
-		if (ret)
-			goto out;
-	}
-
-out:
-	mutex_unlock(&priv->conf_mutex);
-	return ret;
-}
-
 static void p54_configure_filter(struct ieee80211_hw *dev,
 				 unsigned int changed_flags,
 				 unsigned int *total_flags,
@@ -2312,8 +2284,32 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
 				 u32 changed)
 {
 	struct p54_common *priv = dev->priv;
+	int ret;
+
+	mutex_lock(&priv->conf_mutex);
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(priv->bssid, info->bssid, ETH_ALEN);
+		ret = p54_setup_mac(dev);
+		if (ret)
+			goto out;
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		ret = p54_scan(dev, P54_SCAN_EXIT, 0);
+		if (ret)
+			goto out;
+		ret = p54_setup_mac(dev);
+		if (ret)
+			goto out;
+		ret = p54_beacon_update(dev, vif);
+		if (ret)
+			goto out;
+	}
+	/* XXX: this mimics having two callbacks... clean up */
+ out:
+	mutex_unlock(&priv->conf_mutex);
 
-	if (changed & BSS_CHANGED_ERP_SLOT) {
+	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
 		priv->use_short_slot = info->use_short_slot;
 		p54_set_edcf(dev);
 	}
@@ -2334,7 +2330,6 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
 			p54_setup_mac(dev);
 		}
 	}
-
 }
 
 static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
@@ -2344,61 +2339,84 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 	struct p54_common *priv = dev->priv;
 	struct sk_buff *skb;
 	struct p54_keycache *rxkey;
+	int slot, ret = 0;
 	u8 algo = 0;
 
 	if (modparam_nohwcrypt)
 		return -EOPNOTSUPP;
 
-	if (cmd == DISABLE_KEY)
-		algo = 0;
-	else {
+	mutex_lock(&priv->conf_mutex);
+	if (cmd == SET_KEY) {
 		switch (key->alg) {
 		case ALG_TKIP:
 			if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
-			      BR_DESC_PRIV_CAP_TKIP)))
-				return -EOPNOTSUPP;
+			      BR_DESC_PRIV_CAP_TKIP))) {
+				ret = -EOPNOTSUPP;
+				goto out_unlock;
+			}
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			algo = P54_CRYPTO_TKIPMICHAEL;
 			break;
 		case ALG_WEP:
-			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP))
-				return -EOPNOTSUPP;
+			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
+				ret = -EOPNOTSUPP;
+				goto out_unlock;
+			}
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			algo = P54_CRYPTO_WEP;
 			break;
 		case ALG_CCMP:
-			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP))
-				return -EOPNOTSUPP;
+			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
+				ret = -EOPNOTSUPP;
+				goto out_unlock;
+			}
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			algo = P54_CRYPTO_AESCCMP;
 			break;
 		default:
-			return -EOPNOTSUPP;
+			ret = -EOPNOTSUPP;
+			goto out_unlock;
 		}
-	}
+		slot = bitmap_find_free_region(priv->used_rxkeys,
+					       priv->rx_keycache_size, 0);
 
-	if (key->keyidx > priv->rx_keycache_size) {
-		/*
-		 * The device supports the choosen algorithm, but the firmware
-		 * does not provide enough key slots to store all of them.
-		 * So, incoming frames have to be decoded by the mac80211 stack,
-		 * but we can still offload encryption for outgoing frames.
-		 */
+		if (slot < 0) {
+			/*
+			 * The device supports the choosen algorithm, but the
+			 * firmware does not provide enough key slots to store
+			 * all of them.
+			 * But encryption offload for outgoing frames is always
+			 * possible, so we just pretend that the upload was
+			 * successful and do the decryption in software.
+			 */
 
-		return 0;
+			/* mark the key as invalid. */
+			key->hw_key_idx = 0xff;
+			goto out_unlock;
+		}
+	} else {
+		slot = key->hw_key_idx;
+
+		if (slot == 0xff) {
+			/* This key was not uploaded into the rx key cache. */
+
+			goto out_unlock;
+		}
+
+		bitmap_release_region(priv->used_rxkeys, slot, 0);
+		algo = 0;
 	}
 
-	mutex_lock(&priv->conf_mutex);
 	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*rxkey),
-			    P54_CONTROL_TYPE_RX_KEYCACHE, GFP_ATOMIC);
+			    P54_CONTROL_TYPE_RX_KEYCACHE, GFP_KERNEL);
 	if (!skb) {
-		mutex_unlock(&priv->conf_mutex);
-		return -ENOMEM;
+		bitmap_release_region(priv->used_rxkeys, slot, 0);
+		ret = -ENOSPC;
+		goto out_unlock;
 	}
 
-	/* TODO: some devices have 4 more free slots for rx keys */
 	rxkey = (struct p54_keycache *)skb_put(skb, sizeof(*rxkey));
-	rxkey->entry = key->keyidx;
+	rxkey->entry = slot;
 	rxkey->key_id = key->keyidx;
 	rxkey->key_type = algo;
 	if (sta)
@@ -2416,11 +2434,51 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 	}
 
 	priv->tx(dev, skb);
+	key->hw_key_idx = slot;
+
+out_unlock:
 	mutex_unlock(&priv->conf_mutex);
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_P54_LEDS
+static void p54_update_leds(struct work_struct *work)
+{
+	struct p54_common *priv = container_of(work, struct p54_common,
+					       led_work.work);
+	int err, i, tmp, blink_delay = 400;
+	bool rerun = false;
+
+	/* Don't toggle the LED, when the device is down. */
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
+		if (priv->leds[i].toggled) {
+			priv->softled_state |= BIT(i);
+
+			tmp = 70 + 200 / (priv->leds[i].toggled);
+			if (tmp < blink_delay)
+				blink_delay = tmp;
+
+			if (priv->leds[i].led_dev.brightness == LED_OFF)
+				rerun = true;
+
+			priv->leds[i].toggled =
+				!!priv->leds[i].led_dev.brightness;
+		} else
+			priv->softled_state &= ~BIT(i);
+
+	err = p54_set_leds(priv->hw);
+	if (err && net_ratelimit())
+		printk(KERN_ERR "%s: failed to update LEDs.\n",
+			wiphy_name(priv->hw->wiphy));
+
+	if (rerun)
+		queue_delayed_work(priv->hw->workqueue, &priv->led_work,
+			msecs_to_jiffies(blink_delay));
+}
+
 static void p54_led_brightness_set(struct led_classdev *led_dev,
 				   enum led_brightness brightness)
 {
@@ -2428,28 +2486,23 @@ static void p54_led_brightness_set(struct led_classdev *led_dev,
 					       led_dev);
 	struct ieee80211_hw *dev = led->hw_dev;
 	struct p54_common *priv = dev->priv;
-	int err;
 
-	/* Don't toggle the LED, when the device is down. */
 	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
 		return ;
 
-	if (brightness != LED_OFF)
-		priv->softled_state |= BIT(led->index);
-	else
-		priv->softled_state &= ~BIT(led->index);
-
-	err = p54_set_leds(dev);
-	if (err && net_ratelimit())
-		printk(KERN_ERR "%s: failed to update %s LED.\n",
-			wiphy_name(dev->wiphy), led_dev->name);
+	if (brightness) {
+		led->toggled++;
+		queue_delayed_work(priv->hw->workqueue, &priv->led_work,
+				   HZ/10);
+	}
 }
 
 static int p54_register_led(struct ieee80211_hw *dev,
-			    struct p54_led_dev *led,
 			    unsigned int led_index,
 			    char *name, char *trigger)
 {
+	struct p54_common *priv = dev->priv;
+	struct p54_led_dev *led = &priv->leds[led_index];
 	int err;
 
 	if (led->registered)
@@ -2482,19 +2535,30 @@ static int p54_init_leds(struct ieee80211_hw *dev)
 	 * TODO:
 	 * Figure out if the EEPROM contains some hints about the number
 	 * of available/programmable LEDs of the device.
-	 * But for now, we can assume that we have two programmable LEDs.
 	 */
 
-	err = p54_register_led(dev, &priv->assoc_led, 0, "assoc",
+	INIT_DELAYED_WORK(&priv->led_work, p54_update_leds);
+
+	err = p54_register_led(dev, 0, "assoc",
 			       ieee80211_get_assoc_led_name(dev));
 	if (err)
 		return err;
 
-	err = p54_register_led(dev, &priv->tx_led, 1, "tx",
+	err = p54_register_led(dev, 1, "tx",
 			       ieee80211_get_tx_led_name(dev));
 	if (err)
 		return err;
 
+	err = p54_register_led(dev, 2, "rx",
+			       ieee80211_get_rx_led_name(dev));
+	if (err)
+		return err;
+
+	err = p54_register_led(dev, 3, "radio",
+			       ieee80211_get_radio_led_name(dev));
+	if (err)
+		return err;
+
 	err = p54_set_leds(dev);
 	return err;
 }
@@ -2502,11 +2566,11 @@ static int p54_init_leds(struct ieee80211_hw *dev)
 static void p54_unregister_leds(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
+	int i;
 
-	if (priv->tx_led.registered)
-		led_classdev_unregister(&priv->tx_led.led_dev);
-	if (priv->assoc_led.registered)
-		led_classdev_unregister(&priv->assoc_led.led_dev);
+	for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
+		if (priv->leds[i].registered)
+			led_classdev_unregister(&priv->leds[i].led_dev);
 }
 #endif /* CONFIG_P54_LEDS */
 
@@ -2520,7 +2584,6 @@ static const struct ieee80211_ops p54_ops = {
 	.sta_notify		= p54_sta_notify,
 	.set_key		= p54_set_key,
 	.config			= p54_config,
-	.config_interface	= p54_config_interface,
 	.bss_info_changed	= p54_bss_info_changed,
 	.configure_filter	= p54_configure_filter,
 	.conf_tx		= p54_conf_tx,
@@ -2607,21 +2670,10 @@ void p54_free_common(struct ieee80211_hw *dev)
 	kfree(priv->iq_autocal);
 	kfree(priv->output_limit);
 	kfree(priv->curve_data);
+	kfree(priv->used_rxkeys);
 
 #ifdef CONFIG_P54_LEDS
 	p54_unregister_leds(dev);
 #endif /* CONFIG_P54_LEDS */
 }
 EXPORT_SYMBOL_GPL(p54_free_common);
-
-static int __init p54_init(void)
-{
-	return 0;
-}
-
-static void __exit p54_exit(void)
-{
-}
-
-module_init(p54_init);
-module_exit(p54_exit);
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index d1fe577de3d..83116baeb11 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -96,7 +96,7 @@ static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].tx_buf = buf;
-	t[1].len = len;
+	t[1].len = len & ~1;
 	spi_message_add_tail(&t[1], &m);
 
 	if (len % 2) {
@@ -167,15 +167,31 @@ static const struct p54spi_spi_reg p54spi_registers_array[] =
 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
 {
 	int i;
-	__le32 buffer;
 
 	for (i = 0; i < 2000; i++) {
-		p54spi_spi_read(priv, reg, &buffer, sizeof(buffer));
-		if (buffer == bits)
+		__le32 buffer = p54spi_read32(priv, reg);
+		if ((buffer & bits) == bits)
 			return 1;
+	}
+	return 0;
+}
 
-		msleep(1);
+static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
+				const void *buf, size_t len)
+{
+	if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
+			     cpu_to_le32(HOST_ALLOWED))) {
+		dev_err(&priv->spi->dev, "spi_write_dma not allowed "
+			"to DMA write.\n");
+		return -EAGAIN;
 	}
+
+	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
+		       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
+
+	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
+	p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
+	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
 	return 0;
 }
 
@@ -228,8 +244,15 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev)
 static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 {
 	struct p54s_priv *priv = dev->priv;
-	unsigned long fw_len, fw_addr;
-	long _fw_len;
+	unsigned long fw_len, _fw_len;
+	unsigned int offset = 0;
+	int err = 0;
+	u8 *fw;
+
+	fw_len = priv->firmware->size;
+	fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
 
 	/* stop the device */
 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
@@ -244,36 +267,17 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 
 	msleep(TARGET_BOOT_SLEEP);
 
-	fw_addr = ISL38XX_DEV_FIRMWARE_ADDR;
-	fw_len = priv->firmware->size;
-
 	while (fw_len > 0) {
 		_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
 
-		p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
-			       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
-
-		if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
-				    cpu_to_le32(HOST_ALLOWED)) == 0) {
-			dev_err(&priv->spi->dev, "fw_upload not allowed "
-				"to DMA write.");
-			return -EAGAIN;
-		}
-
-		p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN,
-			       cpu_to_le16(_fw_len));
-		p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE,
-			       cpu_to_le32(fw_addr));
-
-		p54spi_spi_write(priv, SPI_ADRS_DMA_DATA,
-				 &priv->firmware->data, _fw_len);
+		err = p54spi_spi_write_dma(priv, cpu_to_le32(
+					   ISL38XX_DEV_FIRMWARE_ADDR + offset),
+					   (fw + offset), _fw_len);
+		if (err < 0)
+			goto out;
 
 		fw_len -= _fw_len;
-		fw_addr += _fw_len;
-
-		/* FIXME: I think this doesn't work if firmware is large,
-		 * this loop goes to second round. fw->data is not
-		 * increased at all! */
+		offset += _fw_len;
 	}
 
 	BUG_ON(fw_len != 0);
@@ -292,7 +296,10 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
 	msleep(TARGET_BOOT_SLEEP);
-	return 0;
+
+out:
+	kfree(fw);
+	return err;
 }
 
 static void p54spi_power_off(struct p54s_priv *priv)
@@ -318,29 +325,21 @@ static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
 	p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
 }
 
-static void p54spi_wakeup(struct p54s_priv *priv)
+static int p54spi_wakeup(struct p54s_priv *priv)
 {
-	unsigned long timeout;
-	u32 ints;
-
 	/* wake the chip */
 	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 		       cpu_to_le32(SPI_TARGET_INT_WAKEUP));
 
 	/* And wait for the READY interrupt */
-	timeout = jiffies + HZ;
-
-	ints =  p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
-	while (!(ints & SPI_HOST_INT_READY)) {
-		if (time_after(jiffies, timeout))
-				goto out;
-		ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
+			     cpu_to_le32(SPI_HOST_INT_READY))) {
+		dev_err(&priv->spi->dev, "INT_READY timeout\n");
+		return -EBUSY;
 	}
 
 	p54spi_int_ack(priv, SPI_HOST_INT_READY);
-
-out:
-	return;
+	return 0;
 }
 
 static inline void p54spi_sleep(struct p54s_priv *priv)
@@ -372,27 +371,48 @@ static int p54spi_rx(struct p54s_priv *priv)
 {
 	struct sk_buff *skb;
 	u16 len;
+	u16 rx_head[2];
+#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
 
-	p54spi_wakeup(priv);
-
-	/* dummy read to flush SPI DMA controller bug */
-	p54spi_read16(priv, SPI_ADRS_GEN_PURP_1);
+	if (p54spi_wakeup(priv) < 0)
+		return -EBUSY;
 
-	len = p54spi_read16(priv, SPI_ADRS_DMA_DATA);
+	/* Read data size and first data word in one SPI transaction
+	 * This is workaround for firmware/DMA bug,
+	 * when first data word gets lost under high load.
+	 */
+	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
+	len = rx_head[0];
 
 	if (len == 0) {
-		dev_err(&priv->spi->dev, "rx request of zero bytes");
+		p54spi_sleep(priv);
+		dev_err(&priv->spi->dev, "rx request of zero bytes\n");
 		return 0;
 	}
 
-	skb = dev_alloc_skb(len);
+	/* Firmware may insert up to 4 padding bytes after the lmac header,
+	 * but it does not amend the size of SPI data transfer.
+	 * Such packets has correct data size in header, thus referencing
+	 * past the end of allocated skb. Reserve extra 4 bytes for this case */
+	skb = dev_alloc_skb(len + 4);
 	if (!skb) {
+		p54spi_sleep(priv);
 		dev_err(&priv->spi->dev, "could not alloc skb");
-		return 0;
+		return -ENOMEM;
 	}
 
-	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, skb_put(skb, len), len);
+	if (len <= READAHEAD_SZ) {
+		memcpy(skb_put(skb, len), rx_head + 1, len);
+	} else {
+		memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ);
+		p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
+				skb_put(skb, len - READAHEAD_SZ),
+				len - READAHEAD_SZ);
+	}
 	p54spi_sleep(priv);
+	/* Put additional bytes to compensate for the possible
+	 * alignment-caused truncation */
+	skb_put(skb, 4);
 
 	if (p54_rx(priv->hw, skb) == 0)
 		dev_kfree_skb(skb);
@@ -414,39 +434,28 @@ static irqreturn_t p54spi_interrupt(int irq, void *config)
 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
 {
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
-	struct p54s_dma_regs dma_regs;
-	unsigned long timeout;
 	int ret = 0;
-	u32 ints;
-
-	p54spi_wakeup(priv);
 
-	dma_regs.cmd = cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE);
-	dma_regs.len = cpu_to_le16(skb->len);
-	dma_regs.addr = hdr->req_id;
+	if (p54spi_wakeup(priv) < 0)
+		return -EBUSY;
 
-	p54spi_spi_write(priv, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs,
-			   sizeof(dma_regs));
-
-	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, skb->data, skb->len);
+	ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
+	if (ret < 0)
+		goto out;
 
-	timeout = jiffies + 2 * HZ;
-	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
-	while (!(ints & SPI_HOST_INT_WR_READY)) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&priv->spi->dev, "WR_READY timeout");
-			ret = -1;
-			goto out;
-		}
-		ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
+			     cpu_to_le32(SPI_HOST_INT_WR_READY))) {
+		dev_err(&priv->spi->dev, "WR_READY timeout\n");
+		ret = -EAGAIN;
+		goto out;
 	}
 
 	p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
-	p54spi_sleep(priv);
 
-out:
 	if (FREE_AFTER_TX(skb))
 		p54_free_skb(priv->hw, skb);
+out:
+	p54spi_sleep(priv);
 	return ret;
 }
 
@@ -516,8 +525,7 @@ static void p54spi_work(struct work_struct *work)
 
 	mutex_lock(&priv->mutex);
 
-	if (priv->fw_state == FW_STATE_OFF &&
-	    priv->fw_state == FW_STATE_RESET)
+	if (priv->fw_state == FW_STATE_OFF)
 		goto out;
 
 	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
@@ -544,11 +552,6 @@ static void p54spi_work(struct work_struct *work)
 	}
 
 	ret = p54spi_wq_tx(priv);
-	if (ret < 0)
-		goto out;
-
-	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
-
 out:
 	mutex_unlock(&priv->mutex);
 }
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6cc6cbc9234..0e877a104a8 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -81,6 +81,29 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 
 MODULE_DEVICE_TABLE(usb, p54u_table);
 
+static const struct {
+	u32 intf;
+	enum p54u_hw_type type;
+	const char *fw;
+	const char *fw_legacy;
+	char hw[20];
+} p54u_fwlist[__NUM_P54U_HWTYPES] = {
+	{
+		.type = P54U_NET2280,
+		.intf = FW_LM86,
+		.fw = "isl3886usb",
+		.fw_legacy = "isl3890usb",
+		.hw = "ISL3886 + net2280",
+	},
+	{
+		.type = P54U_3887,
+		.intf = FW_LM87,
+		.fw = "isl3887usb",
+		.fw_legacy = "isl3887usb_bare",
+		.hw = "ISL3887",
+	},
+};
+
 static void p54u_rx_cb(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -125,11 +148,7 @@ static void p54u_rx_cb(struct urb *urb)
 		}
 		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
-		if (urb->transfer_buffer != skb_tail_pointer(skb)) {
-			/* this should not happen */
-			WARN_ON(1);
-			urb->transfer_buffer = skb_tail_pointer(skb);
-		}
+		urb->transfer_buffer = skb_tail_pointer(skb);
 	}
 	skb_queue_tail(&priv->rx_queue, skb);
 	usb_anchor_urb(urb, &priv->submitted);
@@ -206,53 +225,6 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
 	return ret;
 }
 
-static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
-	struct p54u_priv *priv = dev->priv;
-	struct urb *addr_urb, *data_urb;
-	int err = 0;
-
-	addr_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!addr_urb)
-		return;
-
-	data_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!data_urb) {
-		usb_free_urb(addr_urb);
-		return;
-	}
-
-	usb_fill_bulk_urb(addr_urb, priv->udev,
-			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  &((struct p54_hdr *)skb->data)->req_id, 4,
-			  p54u_tx_dummy_cb, dev);
-	usb_fill_bulk_urb(data_urb, priv->udev,
-			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, FREE_AFTER_TX(skb) ?
-			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
-	addr_urb->transfer_flags |= URB_ZERO_PACKET;
-	data_urb->transfer_flags |= URB_ZERO_PACKET;
-
-	usb_anchor_urb(addr_urb, &priv->submitted);
-	err = usb_submit_urb(addr_urb, GFP_ATOMIC);
-	if (err) {
-		usb_unanchor_urb(addr_urb);
-		goto out;
-	}
-
-	usb_anchor_urb(data_urb, &priv->submitted);
-	err = usb_submit_urb(data_urb, GFP_ATOMIC);
-	if (err)
-		usb_unanchor_urb(data_urb);
-
- out:
-	usb_free_urb(addr_urb);
-	usb_free_urb(data_urb);
-
-	if (err)
-		p54_free_skb(dev, skb);
-}
-
 static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
 {
 	u32 chk = 0;
@@ -425,20 +397,16 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep,
 			    data, len, &alen, 2000);
 }
 
-static const char p54u_romboot_3887[] = "~~~~";
-static const char p54u_firmware_upload_3887[] = "<\r";
-
-static int p54u_device_reset_3887(struct ieee80211_hw *dev)
+static int p54u_device_reset(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
 	int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING);
-	u8 buf[4];
 
 	if (lock) {
 		ret = usb_lock_device_for_reset(priv->udev, priv->intf);
 		if (ret < 0) {
 			dev_err(&priv->udev->dev, "(p54usb) unable to lock "
-				" device for reset: %d\n", ret);
+				"device for reset (%d)!\n", ret);
 			return ret;
 		}
 	}
@@ -447,26 +415,34 @@ static int p54u_device_reset_3887(struct ieee80211_hw *dev)
 	if (lock)
 		usb_unlock_device(priv->udev);
 
-	if (ret) {
+	if (ret)
 		dev_err(&priv->udev->dev, "(p54usb) unable to reset "
-			"device: %d\n", ret);
-		return ret;
-	}
+			"device (%d)!\n", ret);
+
+	return ret;
+}
+
+static const char p54u_romboot_3887[] = "~~~~";
+static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
+{
+	struct p54u_priv *priv = dev->priv;
+	u8 buf[4];
+	int ret;
 
 	memcpy(&buf, p54u_romboot_3887, sizeof(buf));
 	ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
 			    buf, sizeof(buf));
 	if (ret)
 		dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
-			"boot ROM: %d\n", ret);
+			"boot ROM (%d)!\n", ret);
 
 	return ret;
 }
 
+static const char p54u_firmware_upload_3887[] = "<\r";
 static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
-	const struct firmware *fw_entry = NULL;
 	int err, alen;
 	u8 carry = 0;
 	u8 *buf, *tmp;
@@ -475,51 +451,29 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 	struct x2_header *hdr;
 	unsigned long timeout;
 
+	err = p54u_firmware_reset_3887(dev);
+	if (err)
+		return err;
+
 	tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
 	if (!buf) {
 		dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware"
 					  "upload buffer!\n");
-		err = -ENOMEM;
-		goto err_bufalloc;
-	}
-
-	err = p54u_device_reset_3887(dev);
-	if (err)
-		goto err_reset;
-
-	err = request_firmware(&fw_entry, "isl3887usb", &priv->udev->dev);
-	if (err) {
-		dev_err(&priv->udev->dev, "p54usb: cannot find firmware "
-					  "(isl3887usb)\n");
-		err = request_firmware(&fw_entry, "isl3887usb_bare",
-			&priv->udev->dev);
-		if (err)
-			goto err_req_fw_failed;
-	}
-
-	err = p54_parse_firmware(dev, fw_entry);
-	if (err)
-		goto err_upload_failed;
-
-	if (priv->common.fw_interface != FW_LM87) {
-		dev_err(&priv->udev->dev, "wrong firmware, "
-			"please get a LM87 firmware and try again.\n");
-		err = -EINVAL;
-		goto err_upload_failed;
+		return -ENOMEM;
 	}
 
-	left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size);
+	left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size);
 	strcpy(buf, p54u_firmware_upload_3887);
 	left -= strlen(p54u_firmware_upload_3887);
 	tmp += strlen(p54u_firmware_upload_3887);
 
-	data = fw_entry->data;
-	remains = fw_entry->size;
+	data = priv->fw->data;
+	remains = priv->fw->size;
 
 	hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887));
 	memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE);
 	hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR);
-	hdr->fw_length = cpu_to_le32(fw_entry->size);
+	hdr->fw_length = cpu_to_le32(priv->fw->size);
 	hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr,
 					 sizeof(u32)*2));
 	left -= sizeof(*hdr);
@@ -561,7 +515,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 		left = block_size = min((unsigned int)P54U_FW_BLOCK, remains);
 	}
 
-	*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
+	*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data,
+						 priv->fw->size));
 	err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
 	if (err) {
 		dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n");
@@ -612,19 +567,14 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 	if (err)
 		goto err_upload_failed;
 
-  err_upload_failed:
-	release_firmware(fw_entry);
-  err_req_fw_failed:
-  err_reset:
+err_upload_failed:
 	kfree(buf);
-  err_bufalloc:
 	return err;
 }
 
 static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
-	const struct firmware *fw_entry = NULL;
 	const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE;
 	int err, alen;
 	void *buf;
@@ -639,33 +589,6 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 		return -ENOMEM;
 	}
 
-	err = request_firmware(&fw_entry, "isl3886usb", &priv->udev->dev);
-	if (err) {
-		dev_err(&priv->udev->dev, "(p54usb) cannot find firmware "
-					  "(isl3886usb)\n");
-		err = request_firmware(&fw_entry, "isl3890usb",
-			&priv->udev->dev);
-		if (err) {
-			kfree(buf);
-			return err;
-			}
-	}
-
-	err = p54_parse_firmware(dev, fw_entry);
-	if (err) {
-		kfree(buf);
-		release_firmware(fw_entry);
-		return err;
-	}
-
-	if (priv->common.fw_interface != FW_LM86) {
-		dev_err(&priv->udev->dev, "wrong firmware, "
-			"please get a LM86(USB) firmware and try again.\n");
-		kfree(buf);
-		release_firmware(fw_entry);
-		return -EINVAL;
-	}
-
 #define P54U_WRITE(type, addr, data) \
 	do {\
 		err = p54u_write(priv, buf, type,\
@@ -765,8 +688,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 	P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg);
 
 	/* finally, we can upload firmware now! */
-	remains = fw_entry->size;
-	data = fw_entry->data;
+	remains = priv->fw->size;
+	data = priv->fw->data;
 	offset = ISL38XX_DEV_FIRMWARE_ADDR;
 
 	while (remains) {
@@ -875,12 +798,54 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 #undef P54U_WRITE
 #undef P54U_READ
 
- fail:
-	release_firmware(fw_entry);
+fail:
 	kfree(buf);
 	return err;
 }
 
+static int p54u_load_firmware(struct ieee80211_hw *dev)
+{
+	struct p54u_priv *priv = dev->priv;
+	int err, i;
+
+	BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+
+	for (i = 0; i < __NUM_P54U_HWTYPES; i++)
+		if (p54u_fwlist[i].type == priv->hw_type)
+			break;
+
+	if (i == __NUM_P54U_HWTYPES)
+		return -EOPNOTSUPP;
+
+	err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev);
+	if (err) {
+		dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
+					  "(%d)!\n", p54u_fwlist[i].fw, err);
+
+		err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy,
+				       &priv->udev->dev);
+		if (err)
+			return err;
+	}
+
+	err = p54_parse_firmware(dev, priv->fw);
+	if (err)
+		goto out;
+
+	if (priv->common.fw_interface != p54u_fwlist[i].intf) {
+		dev_err(&priv->udev->dev, "wrong firmware, please get "
+			"a firmware for \"%s\" and try again.\n",
+			p54u_fwlist[i].hw);
+		err = -EINVAL;
+	}
+
+out:
+	if (err)
+		release_firmware(priv->fw);
+
+	return err;
+}
+
 static int p54u_open(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
@@ -922,6 +887,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 	}
 
 	priv = dev->priv;
+	priv->hw_type = P54U_INVALID_HW;
 
 	SET_IEEE80211_DEV(dev, &intf->dev);
 	usb_set_intfdata(intf, dev);
@@ -953,37 +919,48 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 	priv->common.open = p54u_open;
 	priv->common.stop = p54u_stop;
 	if (recognized_pipes < P54U_PIPE_NUMBER) {
+#ifdef CONFIG_PM
+		/* ISL3887 needs a full reset on resume */
+		udev->reset_resume = 1;
+		err = p54u_device_reset(dev);
+#endif
+
 		priv->hw_type = P54U_3887;
-		err = p54u_upload_firmware_3887(dev);
-		if (priv->common.fw_interface == FW_LM87) {
-			dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
-			priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
-			priv->common.tx = p54u_tx_lm87;
-		} else
-			priv->common.tx = p54u_tx_3887;
+		dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
+		priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
+		priv->common.tx = p54u_tx_lm87;
+		priv->upload_fw = p54u_upload_firmware_3887;
 	} else {
 		priv->hw_type = P54U_NET2280;
 		dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr);
 		priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr);
 		priv->common.tx = p54u_tx_net2280;
-		err = p54u_upload_firmware_net2280(dev);
+		priv->upload_fw = p54u_upload_firmware_net2280;
 	}
+	err = p54u_load_firmware(dev);
 	if (err)
 		goto err_free_dev;
 
+	err = priv->upload_fw(dev);
+	if (err)
+		goto err_free_fw;
+
 	p54u_open(dev);
 	err = p54_read_eeprom(dev);
 	p54u_stop(dev);
 	if (err)
-		goto err_free_dev;
+		goto err_free_fw;
 
 	err = p54_register_common(dev, &udev->dev);
 	if (err)
-		goto err_free_dev;
+		goto err_free_fw;
 
 	return 0;
 
- err_free_dev:
+err_free_fw:
+	release_firmware(priv->fw);
+
+err_free_dev:
 	ieee80211_free_hw(dev);
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
@@ -1002,20 +979,64 @@ static void __devexit p54u_disconnect(struct usb_interface *intf)
 
 	priv = dev->priv;
 	usb_put_dev(interface_to_usbdev(intf));
+	release_firmware(priv->fw);
 	p54_free_common(dev);
 	ieee80211_free_hw(dev);
 }
 
 static int p54u_pre_reset(struct usb_interface *intf)
 {
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+
+	if (!dev)
+		return -ENODEV;
+
+	p54u_stop(dev);
 	return 0;
 }
 
+static int p54u_resume(struct usb_interface *intf)
+{
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+	struct p54u_priv *priv;
+
+	if (!dev)
+		return -ENODEV;
+
+	priv = dev->priv;
+	if (unlikely(!(priv->upload_fw && priv->fw)))
+		return 0;
+
+	return priv->upload_fw(dev);
+}
+
 static int p54u_post_reset(struct usb_interface *intf)
 {
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+	struct p54u_priv *priv;
+	int err;
+
+	err = p54u_resume(intf);
+	if (err)
+		return err;
+
+	/* reinitialize old device state */
+	priv = dev->priv;
+	if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED)
+		ieee80211_restart_hw(dev);
+
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static int p54u_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return p54u_pre_reset(intf);
+}
+
+#endif /* CONFIG_PM */
+
 static struct usb_driver p54u_driver = {
 	.name	= "p54usb",
 	.id_table = p54u_table,
@@ -1023,6 +1044,11 @@ static struct usb_driver p54u_driver = {
 	.disconnect = p54u_disconnect,
 	.pre_reset = p54u_pre_reset,
 	.post_reset = p54u_post_reset,
+#ifdef CONFIG_PM
+	.suspend = p54u_suspend,
+	.resume = p54u_resume,
+	.reset_resume = p54u_resume,
+#endif /* CONFIG_PM */
 	.soft_unbind = 1,
 };
 
diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
index 8bc58982d8d..e935b79f7f7 100644
--- a/drivers/net/wireless/p54/p54usb.h
+++ b/drivers/net/wireless/p54/p54usb.h
@@ -123,18 +123,26 @@ struct p54u_rx_info {
 	struct ieee80211_hw *dev;
 };
 
+enum p54u_hw_type {
+	P54U_INVALID_HW,
+	P54U_NET2280,
+	P54U_3887,
+
+	/* keep last */
+	__NUM_P54U_HWTYPES,
+};
+
 struct p54u_priv {
 	struct p54_common common;
 	struct usb_device *udev;
 	struct usb_interface *intf;
-	enum {
-		P54U_NET2280 = 0,
-		P54U_3887
-	} hw_type;
+	int (*upload_fw)(struct ieee80211_hw *dev);
 
+	enum p54u_hw_type hw_type;
 	spinlock_t lock;
 	struct sk_buff_head rx_queue;
 	struct usb_anchor submitted;
+	const struct firmware *fw;
 };
 
 #endif /* P54USB_H */
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index ef3ef4551b3..8f621099344 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -87,7 +87,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	unsigned long flags;
 	unsigned char wds_mac[6];
 	u32 curr_frag;
-	int err = 0;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
@@ -107,8 +106,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 		isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
 				  ISL38XX_DEV_INT_REG);
 		udelay(ISL38XX_WRITEIO_DELAY);
-
-		err = -EBUSY;
 		goto drop_free;
 	}
 	/* Check alignment and WDS frame formatting. The start of the packet should
@@ -152,7 +149,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 			if (unlikely(newskb == NULL)) {
 				printk(KERN_ERR "%s: Cannot allocate skb\n",
 				       ndev->name);
-				err = -ENOMEM;
 				goto drop_free;
 			}
 			newskb_offset = (4 - (long) newskb->data) & 0x03;
@@ -197,8 +193,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	if (unlikely(pci_map_address == 0)) {
 		printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
 		       ndev->name);
-
-		err = -EIO;
 		goto drop_free;
 	}
 	/* Place the fragment in the control block structure. */
@@ -246,7 +240,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	ndev->stats.tx_dropped++;
 	spin_unlock_irqrestore(&priv->slock, flags);
 	dev_kfree_skb(skb);
-	return err;
+	return NETDEV_TX_OK;
 }
 
 static inline int
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index fa90d1d8d82..b10b0383dfa 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -892,7 +892,7 @@ static int ray_dev_init(struct net_device *dev)
 #endif /* RAY_IMMEDIATE_INIT */
 
 	/* copy mac and broadcast addresses to linux device */
-	memcpy(&dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
+	memcpy(dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
 	memset(dev->broadcast, 0xff, ETH_ALEN);
 
 	DEBUG(2, "ray_dev_init ending\n");
@@ -923,7 +923,7 @@ static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!(pcmcia_dev_present(link))) {
 		DEBUG(2, "ray_dev_start_xmit - device not present\n");
-		return -1;
+		return NETDEV_TX_LOCKED;
 	}
 	DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
 	if (local->authentication_state == NEED_TO_AUTH) {
@@ -931,7 +931,7 @@ static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
 			local->authentication_state = AUTHENTICATED;
 			netif_stop_queue(dev);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 
@@ -944,7 +944,7 @@ static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	case XMIT_NO_CCS:
 	case XMIT_NEED_AUTH:
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	case XMIT_NO_INTR:
 	case XMIT_MSG_BAD:
 	case XMIT_OK:
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index bebf735cd4b..3bec3dbd345 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2,7 +2,7 @@
  * Driver for RNDIS based wireless USB devices.
  *
  * Copyright (C) 2007 by Bjorge Dijkstra <bjd@jooz.net>
- * Copyright (C) 2008 by Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ * Copyright (C) 2008-2009 by Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -42,6 +42,7 @@
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
 #include <net/iw_handler.h>
+#include <net/cfg80211.h>
 #include <linux/usb/usbnet.h>
 #include <linux/usb/rndis_host.h>
 
@@ -156,43 +157,55 @@ MODULE_PARM_DESC(workaround_interval,
 #define NDIS_802_11_LENGTH_RATES_EX 16
 
 enum ndis_80211_net_type {
-	ndis_80211_type_freq_hop,
-	ndis_80211_type_direct_seq,
-	ndis_80211_type_ofdm_a,
-	ndis_80211_type_ofdm_g
+	NDIS_80211_TYPE_FREQ_HOP,
+	NDIS_80211_TYPE_DIRECT_SEQ,
+	NDIS_80211_TYPE_OFDM_A,
+	NDIS_80211_TYPE_OFDM_G
 };
 
 enum ndis_80211_net_infra {
-	ndis_80211_infra_adhoc,
-	ndis_80211_infra_infra,
-	ndis_80211_infra_auto_unknown
+	NDIS_80211_INFRA_ADHOC,
+	NDIS_80211_INFRA_INFRA,
+	NDIS_80211_INFRA_AUTO_UNKNOWN
 };
 
 enum ndis_80211_auth_mode {
-	ndis_80211_auth_open,
-	ndis_80211_auth_shared,
-	ndis_80211_auth_auto_switch,
-	ndis_80211_auth_wpa,
-	ndis_80211_auth_wpa_psk,
-	ndis_80211_auth_wpa_none,
-	ndis_80211_auth_wpa2,
-	ndis_80211_auth_wpa2_psk
+	NDIS_80211_AUTH_OPEN,
+	NDIS_80211_AUTH_SHARED,
+	NDIS_80211_AUTH_AUTO_SWITCH,
+	NDIS_80211_AUTH_WPA,
+	NDIS_80211_AUTH_WPA_PSK,
+	NDIS_80211_AUTH_WPA_NONE,
+	NDIS_80211_AUTH_WPA2,
+	NDIS_80211_AUTH_WPA2_PSK
 };
 
 enum ndis_80211_encr_status {
-	ndis_80211_encr_wep_enabled,
-	ndis_80211_encr_disabled,
-	ndis_80211_encr_wep_key_absent,
-	ndis_80211_encr_not_supported,
-	ndis_80211_encr_tkip_enabled,
-	ndis_80211_encr_tkip_key_absent,
-	ndis_80211_encr_ccmp_enabled,
-	ndis_80211_encr_ccmp_key_absent
+	NDIS_80211_ENCR_WEP_ENABLED,
+	NDIS_80211_ENCR_DISABLED,
+	NDIS_80211_ENCR_WEP_KEY_ABSENT,
+	NDIS_80211_ENCR_NOT_SUPPORTED,
+	NDIS_80211_ENCR_TKIP_ENABLED,
+	NDIS_80211_ENCR_TKIP_KEY_ABSENT,
+	NDIS_80211_ENCR_CCMP_ENABLED,
+	NDIS_80211_ENCR_CCMP_KEY_ABSENT
 };
 
 enum ndis_80211_priv_filter {
-	ndis_80211_priv_accept_all,
-	ndis_80211_priv_8021x_wep
+	NDIS_80211_PRIV_ACCEPT_ALL,
+	NDIS_80211_PRIV_8021X_WEP
+};
+
+enum ndis_80211_addkey_bits {
+	NDIS_80211_ADDKEY_8021X_AUTH = cpu_to_le32(1 << 28),
+	NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ = cpu_to_le32(1 << 29),
+	NDIS_80211_ADDKEY_PAIRWISE_KEY = cpu_to_le32(1 << 30),
+	NDIS_80211_ADDKEY_TRANSMIT_KEY = cpu_to_le32(1 << 31)
+};
+
+enum ndis_80211_addwep_bits {
+	NDIS_80211_ADDWEP_PERCLIENT_KEY = cpu_to_le32(1 << 30),
+	NDIS_80211_ADDWEP_TRANSMIT_KEY = cpu_to_le32(1 << 31)
 };
 
 struct ndis_80211_ssid {
@@ -308,7 +321,6 @@ enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
 #define CAP_MODE_80211B		2
 #define CAP_MODE_80211G		4
 #define CAP_MODE_MASK		7
-#define CAP_SUPPORT_TXPOWER	8
 
 #define WORK_LINK_UP		(1<<0)
 #define WORK_LINK_DOWN		(1<<1)
@@ -316,25 +328,61 @@ enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
 
 #define COMMAND_BUFFER_SIZE	(CONTROL_BUFFER_SIZE + sizeof(struct rndis_set))
 
-/* RNDIS device private data */
-struct rndis_wext_private {
-	char name[32];
+static const struct ieee80211_channel rndis_channels[] = {
+	{ .center_freq = 2412 },
+	{ .center_freq = 2417 },
+	{ .center_freq = 2422 },
+	{ .center_freq = 2427 },
+	{ .center_freq = 2432 },
+	{ .center_freq = 2437 },
+	{ .center_freq = 2442 },
+	{ .center_freq = 2447 },
+	{ .center_freq = 2452 },
+	{ .center_freq = 2457 },
+	{ .center_freq = 2462 },
+	{ .center_freq = 2467 },
+	{ .center_freq = 2472 },
+	{ .center_freq = 2484 },
+};
 
+static const struct ieee80211_rate rndis_rates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60 },
+	{ .bitrate = 90 },
+	{ .bitrate = 120 },
+	{ .bitrate = 180 },
+	{ .bitrate = 240 },
+	{ .bitrate = 360 },
+	{ .bitrate = 480 },
+	{ .bitrate = 540 }
+};
+
+/* RNDIS device private data */
+struct rndis_wlan_private {
 	struct usbnet *usbdev;
 
+	struct wireless_dev wdev;
+
+	struct cfg80211_scan_request *scan_request;
+
 	struct workqueue_struct *workqueue;
 	struct delayed_work stats_work;
+	struct delayed_work scan_work;
 	struct work_struct work;
 	struct mutex command_lock;
 	spinlock_t stats_lock;
 	unsigned long work_pending;
 
+	struct ieee80211_supported_band band;
+	struct ieee80211_channel channels[ARRAY_SIZE(rndis_channels)];
+	struct ieee80211_rate rates[ARRAY_SIZE(rndis_rates)];
+
 	struct iw_statistics iwstats;
 	struct iw_statistics privstats;
 
-	int  nick_len;
-	char nick[32];
-
 	int caps;
 	int multicast_size;
 
@@ -357,6 +405,7 @@ struct rndis_wext_private {
 	int  encr_tx_key_index;
 	char encr_keys[4][32];
 	int  encr_key_len[4];
+	char encr_key_wpa[4];
 	int  wpa_version;
 	int  wpa_keymgmt;
 	int  wpa_authalg;
@@ -368,8 +417,22 @@ struct rndis_wext_private {
 	u8 command_buffer[COMMAND_BUFFER_SIZE];
 };
 
+/*
+ * cfg80211 ops
+ */
+static int rndis_change_virtual_intf(struct wiphy *wiphy, int ifindex,
+					enum nl80211_iftype type, u32 *flags,
+					struct vif_params *params);
+
+static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request);
 
-static const int rates_80211g[8] = { 6, 9, 12, 18, 24, 36, 48, 54 };
+static struct cfg80211_ops rndis_config_ops = {
+	.change_virtual_intf = rndis_change_virtual_intf,
+	.scan = rndis_scan,
+};
+
+static void *rndis_wiphy_privid = &rndis_wiphy_privid;
 
 static const int bcm4320_power_output[4] = { 25, 50, 75, 100 };
 
@@ -378,13 +441,13 @@ static const unsigned char ffff_bssid[ETH_ALEN] = { 0xff, 0xff, 0xff,
 							0xff, 0xff, 0xff };
 
 
-static struct rndis_wext_private *get_rndis_wext_priv(struct usbnet *dev)
+static struct rndis_wlan_private *get_rndis_wlan_priv(struct usbnet *dev)
 {
-	return (struct rndis_wext_private *)dev->driver_priv;
+	return (struct rndis_wlan_private *)dev->driver_priv;
 }
 
 
-static u32 get_bcm4320_power(struct rndis_wext_private *priv)
+static u32 get_bcm4320_power(struct rndis_wlan_private *priv)
 {
 	return BCM4320_DEFAULT_TXPOWER *
 		bcm4320_power_output[priv->param_power_output] / 100;
@@ -417,7 +480,7 @@ static int rndis_error_status(__le32 rndis_status)
 
 static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(dev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
 	union {
 		void			*buf;
 		struct rndis_msg_hdr	*header;
@@ -463,7 +526,7 @@ static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
 
 static int rndis_set_oid(struct usbnet *dev, __le32 oid, void *data, int len)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(dev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
 	union {
 		void			*buf;
 		struct rndis_msg_hdr	*header;
@@ -584,7 +647,7 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
 	ret = rndis_set_oid(dev, OID_GEN_RNDIS_CONFIG_PARAMETER,
 							infobuf, info_len);
 	if (ret != 0)
-		devdbg(dev, "setting rndis config paramater failed, %d.", ret);
+		devdbg(dev, "setting rndis config parameter failed, %d.", ret);
 
 	kfree(infobuf);
 	return ret;
@@ -684,7 +747,7 @@ static int get_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 
 static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret;
 
 	ret = rndis_set_oid(usbdev, OID_802_11_SSID, ssid, sizeof(*ssid));
@@ -731,7 +794,7 @@ static int is_associated(struct usbnet *usbdev)
 
 static int disassociate(struct usbnet *usbdev, int reset_ssid)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct ndis_80211_ssid ssid;
 	int i, ret = 0;
 
@@ -763,7 +826,7 @@ static int disassociate(struct usbnet *usbdev, int reset_ssid)
 
 static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 	int auth_mode, ret;
 
@@ -772,23 +835,23 @@ static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
 
 	if (wpa_version & IW_AUTH_WPA_VERSION_WPA2) {
 		if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_802_1X)
-			auth_mode = ndis_80211_auth_wpa2;
+			auth_mode = NDIS_80211_AUTH_WPA2;
 		else
-			auth_mode = ndis_80211_auth_wpa2_psk;
+			auth_mode = NDIS_80211_AUTH_WPA2_PSK;
 	} else if (wpa_version & IW_AUTH_WPA_VERSION_WPA) {
 		if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_802_1X)
-			auth_mode = ndis_80211_auth_wpa;
+			auth_mode = NDIS_80211_AUTH_WPA;
 		else if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_PSK)
-			auth_mode = ndis_80211_auth_wpa_psk;
+			auth_mode = NDIS_80211_AUTH_WPA_PSK;
 		else
-			auth_mode = ndis_80211_auth_wpa_none;
+			auth_mode = NDIS_80211_AUTH_WPA_NONE;
 	} else if (authalg & IW_AUTH_ALG_SHARED_KEY) {
 		if (authalg & IW_AUTH_ALG_OPEN_SYSTEM)
-			auth_mode = ndis_80211_auth_auto_switch;
+			auth_mode = NDIS_80211_AUTH_AUTO_SWITCH;
 		else
-			auth_mode = ndis_80211_auth_shared;
+			auth_mode = NDIS_80211_AUTH_SHARED;
 	} else
-		auth_mode = ndis_80211_auth_open;
+		auth_mode = NDIS_80211_AUTH_OPEN;
 
 	tmp = cpu_to_le32(auth_mode);
 	ret = rndis_set_oid(usbdev, OID_802_11_AUTHENTICATION_MODE, &tmp,
@@ -806,16 +869,16 @@ static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
 
 static int set_priv_filter(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 
 	devdbg(usbdev, "set_priv_filter: wpa_version=0x%x", priv->wpa_version);
 
 	if (priv->wpa_version & IW_AUTH_WPA_VERSION_WPA2 ||
 	    priv->wpa_version & IW_AUTH_WPA_VERSION_WPA)
-		tmp = cpu_to_le32(ndis_80211_priv_8021x_wep);
+		tmp = cpu_to_le32(NDIS_80211_PRIV_8021X_WEP);
 	else
-		tmp = cpu_to_le32(ndis_80211_priv_accept_all);
+		tmp = cpu_to_le32(NDIS_80211_PRIV_ACCEPT_ALL);
 
 	return rndis_set_oid(usbdev, OID_802_11_PRIVACY_FILTER, &tmp,
 								sizeof(tmp));
@@ -824,7 +887,7 @@ static int set_priv_filter(struct usbnet *usbdev)
 
 static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 	int encr_mode, ret;
 
@@ -833,18 +896,18 @@ static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 		groupwise);
 
 	if (pairwise & IW_AUTH_CIPHER_CCMP)
-		encr_mode = ndis_80211_encr_ccmp_enabled;
+		encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
 	else if (pairwise & IW_AUTH_CIPHER_TKIP)
-		encr_mode = ndis_80211_encr_tkip_enabled;
+		encr_mode = NDIS_80211_ENCR_TKIP_ENABLED;
 	else if (pairwise &
 		 (IW_AUTH_CIPHER_WEP40 | IW_AUTH_CIPHER_WEP104))
-		encr_mode = ndis_80211_encr_wep_enabled;
+		encr_mode = NDIS_80211_ENCR_WEP_ENABLED;
 	else if (groupwise & IW_AUTH_CIPHER_CCMP)
-		encr_mode = ndis_80211_encr_ccmp_enabled;
+		encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
 	else if (groupwise & IW_AUTH_CIPHER_TKIP)
-		encr_mode = ndis_80211_encr_tkip_enabled;
+		encr_mode = NDIS_80211_ENCR_TKIP_ENABLED;
 	else
-		encr_mode = ndis_80211_encr_disabled;
+		encr_mode = NDIS_80211_ENCR_DISABLED;
 
 	tmp = cpu_to_le32(encr_mode);
 	ret = rndis_set_oid(usbdev, OID_802_11_ENCRYPTION_STATUS, &tmp,
@@ -862,7 +925,7 @@ static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 
 static int set_assoc_params(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	set_auth_mode(usbdev, priv->wpa_version, priv->wpa_authalg);
 	set_priv_filter(usbdev);
@@ -874,7 +937,7 @@ static int set_assoc_params(struct usbnet *usbdev)
 
 static int set_infra_mode(struct usbnet *usbdev, int mode)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 	int ret, i;
 
@@ -894,7 +957,7 @@ static int set_infra_mode(struct usbnet *usbdev, int mode)
 	if (priv->wpa_keymgmt == 0 ||
 		priv->wpa_keymgmt == IW_AUTH_KEY_MGMT_802_1X) {
 		for (i = 0; i < 4; i++) {
-			if (priv->encr_key_len[i] > 0)
+			if (priv->encr_key_len[i] > 0 && !priv->encr_key_wpa[i])
 				add_wep_key(usbdev, priv->encr_keys[i],
 						priv->encr_key_len[i], i);
 		}
@@ -907,12 +970,12 @@ static int set_infra_mode(struct usbnet *usbdev, int mode)
 
 static void set_default_iw_params(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	priv->wpa_keymgmt = 0;
 	priv->wpa_version = 0;
 
-	set_infra_mode(usbdev, ndis_80211_infra_infra);
+	set_infra_mode(usbdev, NDIS_80211_INFRA_INFRA);
 	set_auth_mode(usbdev, IW_AUTH_WPA_VERSION_DISABLED,
 				IW_AUTH_ALG_OPEN_SYSTEM);
 	set_priv_filter(usbdev);
@@ -933,7 +996,7 @@ static int deauthenticate(struct usbnet *usbdev)
 /* index must be 0 - N, as per NDIS  */
 static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct ndis_80211_wep_key ndis_key;
 	int ret;
 
@@ -948,7 +1011,7 @@ static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
 	memcpy(&ndis_key.material, key, key_len);
 
 	if (index == priv->encr_tx_key_index) {
-		ndis_key.index |= cpu_to_le32(1 << 31);
+		ndis_key.index |= NDIS_80211_ADDWEP_TRANSMIT_KEY;
 		ret = set_encr_mode(usbdev, IW_AUTH_CIPHER_WEP104,
 						IW_AUTH_CIPHER_NONE);
 		if (ret)
@@ -965,16 +1028,85 @@ static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
 	}
 
 	priv->encr_key_len[index] = key_len;
+	priv->encr_key_wpa[index] = 0;
 	memcpy(&priv->encr_keys[index], key, key_len);
 
 	return 0;
 }
 
 
+static int add_wpa_key(struct usbnet *usbdev, const u8 *key, int key_len,
+			int index, const struct sockaddr *addr,
+			const u8 *rx_seq, int alg, int flags)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	struct ndis_80211_key ndis_key;
+	int ret;
+
+	if (index < 0 || index >= 4)
+		return -EINVAL;
+	if (key_len > sizeof(ndis_key.material) || key_len < 0)
+		return -EINVAL;
+	if ((flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ) && !rx_seq)
+		return -EINVAL;
+	if ((flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) && !addr)
+		return -EINVAL;
+
+	devdbg(usbdev, "add_wpa_key(%i): flags:%i%i%i", index,
+			!!(flags & NDIS_80211_ADDKEY_TRANSMIT_KEY),
+			!!(flags & NDIS_80211_ADDKEY_PAIRWISE_KEY),
+			!!(flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ));
+
+	memset(&ndis_key, 0, sizeof(ndis_key));
+
+	ndis_key.size = cpu_to_le32(sizeof(ndis_key) -
+				sizeof(ndis_key.material) + key_len);
+	ndis_key.length = cpu_to_le32(key_len);
+	ndis_key.index = cpu_to_le32(index) | flags;
+
+	if (alg == IW_ENCODE_ALG_TKIP && key_len == 32) {
+		/* wpa_supplicant gives us the Michael MIC RX/TX keys in
+		 * different order than NDIS spec, so swap the order here. */
+		memcpy(ndis_key.material, key, 16);
+		memcpy(ndis_key.material + 16, key + 24, 8);
+		memcpy(ndis_key.material + 24, key + 16, 8);
+	} else
+		memcpy(ndis_key.material, key, key_len);
+
+	if (flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ)
+		memcpy(ndis_key.rsc, rx_seq, 6);
+
+	if (flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) {
+		/* pairwise key */
+		memcpy(ndis_key.bssid, addr->sa_data, ETH_ALEN);
+	} else {
+		/* group key */
+		if (priv->infra_mode == NDIS_80211_INFRA_ADHOC)
+			memset(ndis_key.bssid, 0xff, ETH_ALEN);
+		else
+			get_bssid(usbdev, ndis_key.bssid);
+	}
+
+	ret = rndis_set_oid(usbdev, OID_802_11_ADD_KEY, &ndis_key,
+					le32_to_cpu(ndis_key.size));
+	devdbg(usbdev, "add_wpa_key: OID_802_11_ADD_KEY -> %08X", ret);
+	if (ret != 0)
+		return ret;
+
+	priv->encr_key_len[index] = key_len;
+	priv->encr_key_wpa[index] = 1;
+
+	if (flags & NDIS_80211_ADDKEY_TRANSMIT_KEY)
+		priv->encr_tx_key_index = index;
+
+	return 0;
+}
+
+
 /* remove_key is for both wep and wpa */
 static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct ndis_80211_remove_key remove_key;
 	__le32 keyindex;
 	int ret;
@@ -983,6 +1115,7 @@ static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 		return 0;
 
 	priv->encr_key_len[index] = 0;
+	priv->encr_key_wpa[index] = 0;
 	memset(&priv->encr_keys[index], 0, sizeof(priv->encr_keys[index]));
 
 	if (priv->wpa_cipher_pair == IW_AUTH_CIPHER_TKIP ||
@@ -994,7 +1127,8 @@ static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 		if (bssid) {
 			/* pairwise key */
 			if (memcmp(bssid, ffff_bssid, ETH_ALEN) != 0)
-				remove_key.index |= cpu_to_le32(1 << 30);
+				remove_key.index |=
+					NDIS_80211_ADDKEY_PAIRWISE_KEY;
 			memcpy(remove_key.bssid, bssid,
 					sizeof(remove_key.bssid));
 		} else
@@ -1027,7 +1161,7 @@ static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 
 static void set_multicast_list(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct dev_mc_list *mclist;
 	__le32 filter;
 	int ret, i, size;
@@ -1086,131 +1220,180 @@ static void set_multicast_list(struct usbnet *usbdev)
 
 
 /*
- * wireless extension handlers
+ * cfg80211 ops
  */
-
-static int rndis_iw_commit(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+static int rndis_change_virtual_intf(struct wiphy *wiphy, int ifindex,
+					enum nl80211_iftype type, u32 *flags,
+					struct vif_params *params)
 {
-	/* dummy op */
-	return 0;
+	struct net_device *dev;
+	struct usbnet *usbdev;
+	int mode;
+
+	/* we're under RTNL */
+	dev = __dev_get_by_index(&init_net, ifindex);
+	if (!dev)
+		return -ENODEV;
+	usbdev = netdev_priv(dev);
+
+	switch (type) {
+	case NL80211_IFTYPE_ADHOC:
+		mode = NDIS_80211_INFRA_ADHOC;
+		break;
+	case NL80211_IFTYPE_STATION:
+		mode = NDIS_80211_INFRA_INFRA;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return set_infra_mode(usbdev, mode);
 }
 
 
-static int rndis_iw_get_range(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+#define SCAN_DELAY_JIFFIES (HZ)
+static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request)
 {
-	struct iw_range *range = (struct iw_range *)extra;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-	int len, ret, i, j, num, has_80211g_rates;
-	u8 rates[8];
-	__le32 tx_power;
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	int ret;
+	__le32 tmp;
+
+	devdbg(usbdev, "cfg80211.scan");
 
-	devdbg(usbdev, "SIOCGIWRANGE");
+	if (!request)
+		return -EINVAL;
 
-	/* clear iw_range struct */
-	memset(range, 0, sizeof(*range));
-	wrqu->data.length = sizeof(*range);
+	if (priv->scan_request && priv->scan_request != request)
+		return -EBUSY;
 
-	range->txpower_capa = IW_TXPOW_MWATT;
-	range->num_txpower = 1;
-	if (priv->caps & CAP_SUPPORT_TXPOWER) {
-		len = sizeof(tx_power);
-		ret = rndis_query_oid(usbdev, OID_802_11_TX_POWER_LEVEL,
-						&tx_power, &len);
-		if (ret == 0 && le32_to_cpu(tx_power) != 0xFF)
-			range->txpower[0] = le32_to_cpu(tx_power);
-		else
-			range->txpower[0] = get_bcm4320_power(priv);
-	} else
-		range->txpower[0] = get_bcm4320_power(priv);
+	priv->scan_request = request;
 
-	len = sizeof(rates);
-	ret = rndis_query_oid(usbdev, OID_802_11_SUPPORTED_RATES, &rates,
-								&len);
-	has_80211g_rates = 0;
+	tmp = cpu_to_le32(1);
+	ret = rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp,
+							sizeof(tmp));
 	if (ret == 0) {
-		j = 0;
-		for (i = 0; i < len; i++) {
-			if (rates[i] == 0)
-				break;
-			range->bitrate[j] = (rates[i] & 0x7f) * 500000;
-			/* check for non 802.11b rates */
-			if (range->bitrate[j] == 6000000 ||
-				range->bitrate[j] == 9000000 ||
-				(range->bitrate[j] >= 12000000 &&
-				range->bitrate[j] != 22000000))
-				has_80211g_rates = 1;
-			j++;
-		}
-		range->num_bitrates = j;
-	} else
-		range->num_bitrates = 0;
-
-	/* fill in 802.11g rates */
-	if (has_80211g_rates) {
-		num = range->num_bitrates;
-		for (i = 0; i < ARRAY_SIZE(rates_80211g); i++) {
-			for (j = 0; j < num; j++) {
-				if (range->bitrate[j] ==
-					rates_80211g[i] * 1000000)
-					break;
-			}
-			if (j == num)
-				range->bitrate[range->num_bitrates++] =
-					rates_80211g[i] * 1000000;
-			if (range->num_bitrates == IW_MAX_BITRATES)
-				break;
-		}
+		/* Wait before retrieving scan results from device */
+		queue_delayed_work(priv->workqueue, &priv->scan_work,
+			SCAN_DELAY_JIFFIES);
+	}
 
-		/* estimated max real througput in bps */
-		range->throughput = 54 * 1000 * 1000 / 2;
+	return ret;
+}
 
-		/* ~35%	more with afterburner */
-		if (priv->param_afterburner)
-			range->throughput = range->throughput / 100 * 135;
-	} else {
-		/* estimated max real througput in bps */
-		range->throughput = 11 * 1000 * 1000 / 2;
+
+static struct cfg80211_bss *rndis_bss_info_update(struct usbnet *usbdev,
+					struct ndis_80211_bssid_ex *bssid)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	struct ieee80211_channel *channel;
+	s32 signal;
+	u64 timestamp;
+	u16 capability;
+	u16 beacon_interval;
+	struct ndis_80211_fixed_ies *fixed;
+	int ie_len, bssid_len;
+	u8 *ie;
+
+	/* parse bssid structure */
+	bssid_len = le32_to_cpu(bssid->length);
+
+	if (bssid_len < sizeof(struct ndis_80211_bssid_ex) +
+			sizeof(struct ndis_80211_fixed_ies))
+		return NULL;
+
+	fixed = (struct ndis_80211_fixed_ies *)bssid->ies;
+
+	ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies));
+	ie_len = min(bssid_len - (int)sizeof(*bssid),
+					(int)le32_to_cpu(bssid->ie_length));
+	ie_len -= sizeof(struct ndis_80211_fixed_ies);
+	if (ie_len < 0)
+		return NULL;
+
+	/* extract data for cfg80211_inform_bss */
+	channel = ieee80211_get_channel(priv->wdev.wiphy,
+			KHZ_TO_MHZ(le32_to_cpu(bssid->config.ds_config)));
+	if (!channel)
+		return NULL;
+
+	signal = level_to_qual(le32_to_cpu(bssid->rssi));
+	timestamp = le64_to_cpu(*(__le64 *)fixed->timestamp);
+	capability = le16_to_cpu(fixed->capabilities);
+	beacon_interval = le16_to_cpu(fixed->beacon_interval);
+
+	return cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid->mac,
+		timestamp, capability, beacon_interval, ie, ie_len, signal,
+		GFP_KERNEL);
+}
+
+
+static int rndis_check_bssid_list(struct usbnet *usbdev)
+{
+	void *buf = NULL;
+	struct ndis_80211_bssid_list_ex *bssid_list;
+	struct ndis_80211_bssid_ex *bssid;
+	int ret = -EINVAL, len, count, bssid_len;
+
+	devdbg(usbdev, "check_bssid_list");
+
+	len = CONTROL_BUFFER_SIZE;
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto out;
 	}
 
-	range->num_channels = 14;
+	ret = rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &len);
+	if (ret != 0)
+		goto out;
 
-	for (i = 0; (i < 14) && (i < IW_MAX_FREQUENCIES); i++) {
-		range->freq[i].i = i + 1;
-		range->freq[i].m = ieee80211_dsss_chan_to_freq(i + 1) * 100000;
-		range->freq[i].e = 1;
+	bssid_list = buf;
+	bssid = bssid_list->bssid;
+	bssid_len = le32_to_cpu(bssid->length);
+	count = le32_to_cpu(bssid_list->num_items);
+	devdbg(usbdev, "check_bssid_list: %d BSSIDs found", count);
+
+	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
+		rndis_bss_info_update(usbdev, bssid);
+
+		bssid = (void *)bssid + bssid_len;
+		bssid_len = le32_to_cpu(bssid->length);
+		count--;
 	}
-	range->num_frequency = i;
 
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
+out:
+	kfree(buf);
+	return ret;
+}
 
-	range->max_qual.qual = 100;
-	range->max_qual.level = 154;
-	range->max_qual.updated = IW_QUAL_QUAL_UPDATED
-				| IW_QUAL_LEVEL_UPDATED
-				| IW_QUAL_NOISE_INVALID;
 
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = WIRELESS_EXT;
+static void rndis_get_scan_results(struct work_struct *work)
+{
+	struct rndis_wlan_private *priv =
+		container_of(work, struct rndis_wlan_private, scan_work.work);
+	struct usbnet *usbdev = priv->usbdev;
+	int ret;
+
+	devdbg(usbdev, "get_scan_results");
 
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-			IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-	return 0;
+	ret = rndis_check_bssid_list(usbdev);
+
+	cfg80211_scan_done(priv->scan_request, ret < 0);
+
+	priv->scan_request = NULL;
 }
 
 
-static int rndis_iw_get_name(struct net_device *dev,
+/*
+ * wireless extension handlers
+ */
+
+static int rndis_iw_commit(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	strcpy(wrqu->name, priv->name);
+	/* dummy op */
 	return 0;
 }
 
@@ -1314,7 +1497,7 @@ static int rndis_iw_set_auth(struct net_device *dev,
 {
 	struct iw_param *p = &wrqu->param;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret = -ENOTSUPP;
 
 	switch (p->flags & IW_AUTH_INDEX) {
@@ -1395,7 +1578,7 @@ static int rndis_iw_get_auth(struct net_device *dev,
 {
 	struct iw_param *p = &wrqu->param;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	switch (p->flags & IW_AUTH_INDEX) {
 	case IW_AUTH_WPA_VERSION:
@@ -1422,60 +1605,11 @@ static int rndis_iw_get_auth(struct net_device *dev,
 }
 
 
-static int rndis_iw_get_mode(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	switch (priv->infra_mode) {
-	case ndis_80211_infra_adhoc:
-		wrqu->mode = IW_MODE_ADHOC;
-		break;
-	case ndis_80211_infra_infra:
-		wrqu->mode = IW_MODE_INFRA;
-		break;
-	/*case ndis_80211_infra_auto_unknown:*/
-	default:
-		wrqu->mode = IW_MODE_AUTO;
-		break;
-	}
-	devdbg(usbdev, "SIOCGIWMODE: %08x", wrqu->mode);
-	return 0;
-}
-
-
-static int rndis_iw_set_mode(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	int mode;
-
-	devdbg(usbdev, "SIOCSIWMODE: %08x", wrqu->mode);
-
-	switch (wrqu->mode) {
-	case IW_MODE_ADHOC:
-		mode = ndis_80211_infra_adhoc;
-		break;
-	case IW_MODE_INFRA:
-		mode = ndis_80211_infra_infra;
-		break;
-	/*case IW_MODE_AUTO:*/
-	default:
-		mode = ndis_80211_infra_auto_unknown;
-		break;
-	}
-
-	return set_infra_mode(usbdev, mode);
-}
-
-
 static int rndis_iw_set_encode(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret, index, key_len;
 	u8 *key;
 
@@ -1538,10 +1672,8 @@ static int rndis_iw_set_encode_ext(struct net_device *dev,
 {
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-	struct ndis_80211_key ndis_key;
-	int keyidx, ret;
-	u8 *addr;
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	int keyidx, flags;
 
 	keyidx = wrqu->encoding.flags & IW_ENCODE_INDEX;
 
@@ -1564,250 +1696,16 @@ static int rndis_iw_set_encode_ext(struct net_device *dev,
 	    ext->alg == IW_ENCODE_ALG_NONE || ext->key_len == 0)
 		return remove_key(usbdev, keyidx, NULL);
 
-	if (ext->key_len > sizeof(ndis_key.material))
-		return -1;
-
-	memset(&ndis_key, 0, sizeof(ndis_key));
-
-	ndis_key.size = cpu_to_le32(sizeof(ndis_key) -
-				sizeof(ndis_key.material) + ext->key_len);
-	ndis_key.length = cpu_to_le32(ext->key_len);
-	ndis_key.index = cpu_to_le32(keyidx);
-
-	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
-		memcpy(ndis_key.rsc, ext->rx_seq, 6);
-		ndis_key.index |= cpu_to_le32(1 << 29);
-	}
-
-	addr = ext->addr.sa_data;
-	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
-		/* group key */
-		if (priv->infra_mode == ndis_80211_infra_adhoc)
-			memset(ndis_key.bssid, 0xff, ETH_ALEN);
-		else
-			get_bssid(usbdev, ndis_key.bssid);
-	} else {
-		/* pairwise key */
-		ndis_key.index |= cpu_to_le32(1 << 30);
-		memcpy(ndis_key.bssid, addr, ETH_ALEN);
-	}
-
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		ndis_key.index |= cpu_to_le32(1 << 31);
-
-	if (ext->alg == IW_ENCODE_ALG_TKIP && ext->key_len == 32) {
-		/* wpa_supplicant gives us the Michael MIC RX/TX keys in
-		 * different order than NDIS spec, so swap the order here. */
-		memcpy(ndis_key.material, ext->key, 16);
-		memcpy(ndis_key.material + 16, ext->key + 24, 8);
-		memcpy(ndis_key.material + 24, ext->key + 16, 8);
-	} else
-		memcpy(ndis_key.material, ext->key, ext->key_len);
-
-	ret = rndis_set_oid(usbdev, OID_802_11_ADD_KEY, &ndis_key,
-					le32_to_cpu(ndis_key.size));
-	devdbg(usbdev, "SIOCSIWENCODEEXT: OID_802_11_ADD_KEY -> %08X", ret);
-	if (ret != 0)
-		return ret;
-
-	priv->encr_key_len[keyidx] = ext->key_len;
-	memcpy(&priv->encr_keys[keyidx], ndis_key.material, ext->key_len);
+	flags = 0;
+	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+		flags |= NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ;
+	if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY))
+		flags |= NDIS_80211_ADDKEY_PAIRWISE_KEY;
 	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		priv->encr_tx_key_index = keyidx;
-
-	return 0;
-}
-
-
-static int rndis_iw_set_scan(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	union iwreq_data evt;
-	int ret = -EINVAL;
-	__le32 tmp;
-
-	devdbg(usbdev, "SIOCSIWSCAN");
-
-	if (wrqu->data.flags == 0) {
-		tmp = cpu_to_le32(1);
-		ret = rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp,
-								sizeof(tmp));
-		evt.data.flags = 0;
-		evt.data.length = 0;
-		wireless_send_event(dev, SIOCGIWSCAN, &evt, NULL);
-	}
-	return ret;
-}
-
-
-static char *rndis_translate_scan(struct net_device *dev,
-				  struct iw_request_info *info, char *cev,
-				  char *end_buf,
-				  struct ndis_80211_bssid_ex *bssid)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	u8 *ie;
-	char *current_val;
-	int bssid_len, ie_len, i;
-	u32 beacon, atim;
-	struct iw_event iwe;
-	unsigned char sbuf[32];
-
-	bssid_len = le32_to_cpu(bssid->length);
-
-	devdbg(usbdev, "BSSID %pM", bssid->mac);
-	iwe.cmd = SIOCGIWAP;
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	memcpy(iwe.u.ap_addr.sa_data, bssid->mac, ETH_ALEN);
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_ADDR_LEN);
-
-	devdbg(usbdev, "SSID(%d) %s", le32_to_cpu(bssid->ssid.length),
-						bssid->ssid.essid);
-	iwe.cmd = SIOCGIWESSID;
-	iwe.u.essid.length = le32_to_cpu(bssid->ssid.length);
-	iwe.u.essid.flags = 1;
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, bssid->ssid.essid);
-
-	devdbg(usbdev, "MODE %d", le32_to_cpu(bssid->net_infra));
-	iwe.cmd = SIOCGIWMODE;
-	switch (le32_to_cpu(bssid->net_infra)) {
-	case ndis_80211_infra_adhoc:
-		iwe.u.mode = IW_MODE_ADHOC;
-		break;
-	case ndis_80211_infra_infra:
-		iwe.u.mode = IW_MODE_INFRA;
-		break;
-	/*case ndis_80211_infra_auto_unknown:*/
-	default:
-		iwe.u.mode = IW_MODE_AUTO;
-		break;
-	}
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_UINT_LEN);
-
-	devdbg(usbdev, "FREQ %d kHz", le32_to_cpu(bssid->config.ds_config));
-	iwe.cmd = SIOCGIWFREQ;
-	dsconfig_to_freq(le32_to_cpu(bssid->config.ds_config), &iwe.u.freq);
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_FREQ_LEN);
-
-	devdbg(usbdev, "QUAL %d", le32_to_cpu(bssid->rssi));
-	iwe.cmd = IWEVQUAL;
-	iwe.u.qual.qual  = level_to_qual(le32_to_cpu(bssid->rssi));
-	iwe.u.qual.level = le32_to_cpu(bssid->rssi);
-	iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED
-			| IW_QUAL_LEVEL_UPDATED
-			| IW_QUAL_NOISE_INVALID;
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_QUAL_LEN);
-
-	devdbg(usbdev, "ENCODE %d", le32_to_cpu(bssid->privacy));
-	iwe.cmd = SIOCGIWENCODE;
-	iwe.u.data.length = 0;
-	if (le32_to_cpu(bssid->privacy) == ndis_80211_priv_accept_all)
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	else
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL);
-
-	devdbg(usbdev, "RATES:");
-	current_val = cev + iwe_stream_lcp_len(info);
-	iwe.cmd = SIOCGIWRATE;
-	for (i = 0; i < sizeof(bssid->rates); i++) {
-		if (bssid->rates[i] & 0x7f) {
-			iwe.u.bitrate.value =
-				((bssid->rates[i] & 0x7f) *
-				500000);
-			devdbg(usbdev, " %d", iwe.u.bitrate.value);
-			current_val = iwe_stream_add_value(info, cev,
-				current_val, end_buf, &iwe,
-				IW_EV_PARAM_LEN);
-		}
-	}
-
-	if ((current_val - cev) > iwe_stream_lcp_len(info))
-		cev = current_val;
-
-	beacon = le32_to_cpu(bssid->config.beacon_period);
-	devdbg(usbdev, "BCN_INT %d", beacon);
-	iwe.cmd = IWEVCUSTOM;
-	snprintf(sbuf, sizeof(sbuf), "bcn_int=%d", beacon);
-	iwe.u.data.length = strlen(sbuf);
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf);
-
-	atim = le32_to_cpu(bssid->config.atim_window);
-	devdbg(usbdev, "ATIM %d", atim);
-	iwe.cmd = IWEVCUSTOM;
-	snprintf(sbuf, sizeof(sbuf), "atim=%u", atim);
-	iwe.u.data.length = strlen(sbuf);
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf);
-
-	ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies));
-	ie_len = min(bssid_len - (int)sizeof(*bssid),
-					(int)le32_to_cpu(bssid->ie_length));
-	ie_len -= sizeof(struct ndis_80211_fixed_ies);
-	while (ie_len >= 2 && 2 + ie[1] <= ie_len) {
-		if ((ie[0] == WLAN_EID_GENERIC && ie[1] >= 4 &&
-		     memcmp(ie + 2, "\x00\x50\xf2\x01", 4) == 0) ||
-		    ie[0] == WLAN_EID_RSN) {
-			devdbg(usbdev, "IE: WPA%d",
-					(ie[0] == WLAN_EID_RSN) ? 2 : 1);
-			iwe.cmd = IWEVGENIE;
-			/* arbitrary cut-off at 64 */
-			iwe.u.data.length = min(ie[1] + 2, 64);
-			cev = iwe_stream_add_point(info, cev, end_buf, &iwe, ie);
-		}
-
-		ie_len -= 2 + ie[1];
-		ie += 2 + ie[1];
-	}
-
-	return cev;
-}
-
-
-static int rndis_iw_get_scan(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	void *buf = NULL;
-	char *cev = extra;
-	struct ndis_80211_bssid_list_ex *bssid_list;
-	struct ndis_80211_bssid_ex *bssid;
-	int ret = -EINVAL, len, count, bssid_len;
-
-	devdbg(usbdev, "SIOCGIWSCAN");
+		flags |= NDIS_80211_ADDKEY_TRANSMIT_KEY;
 
-	len = CONTROL_BUFFER_SIZE;
-	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	ret = rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &len);
-
-	if (ret != 0)
-		goto out;
-
-	bssid_list = buf;
-	bssid = bssid_list->bssid;
-	bssid_len = le32_to_cpu(bssid->length);
-	count = le32_to_cpu(bssid_list->num_items);
-	devdbg(usbdev, "SIOCGIWSCAN: %d BSSIDs found", count);
-
-	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
-		cev = rndis_translate_scan(dev, info, cev,
-					   extra + IW_SCAN_MAX_DATA, bssid);
-		bssid = (void *)bssid + bssid_len;
-		bssid_len = le32_to_cpu(bssid->length);
-		count--;
-	}
-
-out:
-	wrqu->data.length = cev - extra;
-	wrqu->data.flags = 0;
-	kfree(buf);
-	return ret;
+	return add_wpa_key(usbdev, ext->key, ext->key_len, keyidx, &ext->addr,
+				ext->rx_seq, ext->alg, flags);
 }
 
 
@@ -1815,7 +1713,7 @@ static int rndis_iw_set_genie(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret = 0;
 
 #ifdef DEBUG
@@ -1849,7 +1747,7 @@ static int rndis_iw_get_genie(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	devdbg(usbdev, "SIOCGIWGENIE");
 
@@ -1936,39 +1834,6 @@ static int rndis_iw_get_frag(struct net_device *dev,
 }
 
 
-static int rndis_iw_set_nick(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	devdbg(usbdev, "SIOCSIWNICK");
-
-	priv->nick_len = wrqu->data.length;
-	if (priv->nick_len > 32)
-		priv->nick_len = 32;
-
-	memcpy(priv->nick, extra, priv->nick_len);
-	return 0;
-}
-
-
-static int rndis_iw_get_nick(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	wrqu->data.flags = 1;
-	wrqu->data.length = priv->nick_len;
-	memcpy(extra, priv->nick, priv->nick_len);
-
-	devdbg(usbdev, "SIOCGIWNICK: '%s'", priv->nick);
-
-	return 0;
-}
-
-
 static int rndis_iw_set_freq(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
@@ -2021,20 +1886,12 @@ static int rndis_iw_get_txpower(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tx_power;
-	int ret = 0, len;
 
 	if (priv->radio_on) {
-		if (priv->caps & CAP_SUPPORT_TXPOWER) {
-			len = sizeof(tx_power);
-			ret = rndis_query_oid(usbdev, OID_802_11_TX_POWER_LEVEL,
-							&tx_power, &len);
-			if (ret != 0)
-				return ret;
-		} else
-			/* fake incase not supported */
-			tx_power = cpu_to_le32(get_bcm4320_power(priv));
+		/* fake since changing tx_power (by userlevel) not supported */
+		tx_power = cpu_to_le32(get_bcm4320_power(priv));
 
 		wrqu->txpower.flags = IW_TXPOW_MWATT;
 		wrqu->txpower.value = le32_to_cpu(tx_power);
@@ -2047,7 +1904,7 @@ static int rndis_iw_get_txpower(struct net_device *dev,
 
 	devdbg(usbdev, "SIOCGIWTXPOW: %d", wrqu->txpower.value);
 
-	return ret;
+	return 0;
 }
 
 
@@ -2055,9 +1912,8 @@ static int rndis_iw_set_txpower(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tx_power = 0;
-	int ret = 0;
 
 	if (!wrqu->txpower.disabled) {
 		if (wrqu->txpower.flags == IW_TXPOW_MWATT)
@@ -2080,22 +1936,10 @@ static int rndis_iw_set_txpower(struct net_device *dev,
 	devdbg(usbdev, "SIOCSIWTXPOW: %d", le32_to_cpu(tx_power));
 
 	if (le32_to_cpu(tx_power) != 0) {
-		if (priv->caps & CAP_SUPPORT_TXPOWER) {
-			/* turn radio on first */
-			if (!priv->radio_on)
-				disassociate(usbdev, 1);
-
-			ret = rndis_set_oid(usbdev, OID_802_11_TX_POWER_LEVEL,
-						&tx_power, sizeof(tx_power));
-			if (ret != 0)
-				ret = -EOPNOTSUPP;
-			return ret;
-		} else {
-			/* txpower unsupported, just turn radio on */
-			if (!priv->radio_on)
-				return disassociate(usbdev, 1);
-			return 0; /* all ready on */
-		}
+		/* txpower unsupported, just turn radio on */
+		if (!priv->radio_on)
+			return disassociate(usbdev, 1);
+		return 0; /* all ready on */
 	}
 
 	/* tx_power == 0, turn off radio */
@@ -2125,7 +1969,7 @@ static int rndis_iw_set_mlme(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct iw_mlme *mlme = (struct iw_mlme *)extra;
 	unsigned char bssid[ETH_ALEN];
 
@@ -2150,7 +1994,7 @@ static int rndis_iw_set_mlme(struct net_device *dev,
 static struct iw_statistics *rndis_get_wireless_stats(struct net_device *dev)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->stats_lock, flags);
@@ -2165,20 +2009,18 @@ static struct iw_statistics *rndis_get_wireless_stats(struct net_device *dev)
 static const iw_handler rndis_iw_handler[] =
 {
 	IW_IOCTL(SIOCSIWCOMMIT)    = rndis_iw_commit,
-	IW_IOCTL(SIOCGIWNAME)      = rndis_iw_get_name,
+	IW_IOCTL(SIOCGIWNAME)      = (iw_handler) cfg80211_wext_giwname,
 	IW_IOCTL(SIOCSIWFREQ)      = rndis_iw_set_freq,
 	IW_IOCTL(SIOCGIWFREQ)      = rndis_iw_get_freq,
-	IW_IOCTL(SIOCSIWMODE)      = rndis_iw_set_mode,
-	IW_IOCTL(SIOCGIWMODE)      = rndis_iw_get_mode,
-	IW_IOCTL(SIOCGIWRANGE)     = rndis_iw_get_range,
+	IW_IOCTL(SIOCSIWMODE)      = (iw_handler) cfg80211_wext_siwmode,
+	IW_IOCTL(SIOCGIWMODE)      = (iw_handler) cfg80211_wext_giwmode,
+	IW_IOCTL(SIOCGIWRANGE)     = (iw_handler) cfg80211_wext_giwrange,
 	IW_IOCTL(SIOCSIWAP)        = rndis_iw_set_bssid,
 	IW_IOCTL(SIOCGIWAP)        = rndis_iw_get_bssid,
-	IW_IOCTL(SIOCSIWSCAN)      = rndis_iw_set_scan,
-	IW_IOCTL(SIOCGIWSCAN)      = rndis_iw_get_scan,
+	IW_IOCTL(SIOCSIWSCAN)      = (iw_handler) cfg80211_wext_siwscan,
+	IW_IOCTL(SIOCGIWSCAN)      = (iw_handler) cfg80211_wext_giwscan,
 	IW_IOCTL(SIOCSIWESSID)     = rndis_iw_set_essid,
 	IW_IOCTL(SIOCGIWESSID)     = rndis_iw_get_essid,
-	IW_IOCTL(SIOCSIWNICKN)     = rndis_iw_set_nick,
-	IW_IOCTL(SIOCGIWNICKN)     = rndis_iw_get_nick,
 	IW_IOCTL(SIOCGIWRATE)      = rndis_iw_get_rate,
 	IW_IOCTL(SIOCSIWRTS)       = rndis_iw_set_rts,
 	IW_IOCTL(SIOCGIWRTS)       = rndis_iw_get_rts,
@@ -2195,28 +2037,28 @@ static const iw_handler rndis_iw_handler[] =
 	IW_IOCTL(SIOCSIWMLME)      = rndis_iw_set_mlme,
 };
 
-static const iw_handler rndis_wext_private_handler[] = {
+static const iw_handler rndis_wlan_private_handler[] = {
 };
 
-static const struct iw_priv_args rndis_wext_private_args[] = {
+static const struct iw_priv_args rndis_wlan_private_args[] = {
 };
 
 
 static const struct iw_handler_def rndis_iw_handlers = {
 	.num_standard = ARRAY_SIZE(rndis_iw_handler),
-	.num_private  = ARRAY_SIZE(rndis_wext_private_handler),
-	.num_private_args = ARRAY_SIZE(rndis_wext_private_args),
+	.num_private  = ARRAY_SIZE(rndis_wlan_private_handler),
+	.num_private_args = ARRAY_SIZE(rndis_wlan_private_args),
 	.standard = (iw_handler *)rndis_iw_handler,
-	.private  = (iw_handler *)rndis_wext_private_handler,
-	.private_args = (struct iw_priv_args *)rndis_wext_private_args,
+	.private  = (iw_handler *)rndis_wlan_private_handler,
+	.private_args = (struct iw_priv_args *)rndis_wlan_private_args,
 	.get_wireless_stats = rndis_get_wireless_stats,
 };
 
 
-static void rndis_wext_worker(struct work_struct *work)
+static void rndis_wlan_worker(struct work_struct *work)
 {
-	struct rndis_wext_private *priv =
-		container_of(work, struct rndis_wext_private, work);
+	struct rndis_wlan_private *priv =
+		container_of(work, struct rndis_wlan_private, work);
 	struct usbnet *usbdev = priv->usbdev;
 	union iwreq_data evt;
 	unsigned char bssid[ETH_ALEN];
@@ -2277,10 +2119,10 @@ get_bssid:
 		set_multicast_list(usbdev);
 }
 
-static void rndis_wext_set_multicast_list(struct net_device *dev)
+static void rndis_wlan_set_multicast_list(struct net_device *dev)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	if (test_bit(WORK_SET_MULTICAST_LIST, &priv->work_pending))
 		return;
@@ -2289,9 +2131,9 @@ static void rndis_wext_set_multicast_list(struct net_device *dev)
 	queue_work(priv->workqueue, &priv->work);
 }
 
-static void rndis_wext_link_change(struct usbnet *usbdev, int state)
+static void rndis_wlan_link_change(struct usbnet *usbdev, int state)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	/* queue work to avoid recursive calls into rndis_command */
 	set_bit(state ? WORK_LINK_UP : WORK_LINK_DOWN, &priv->work_pending);
@@ -2299,22 +2141,14 @@ static void rndis_wext_link_change(struct usbnet *usbdev, int state)
 }
 
 
-static int rndis_wext_get_caps(struct usbnet *usbdev)
+static int rndis_wlan_get_caps(struct usbnet *usbdev)
 {
 	struct {
 		__le32	num_items;
 		__le32	items[8];
 	} networks_supported;
 	int len, retval, i, n;
-	__le32 tx_power;
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	/* determine if supports setting txpower */
-	len = sizeof(tx_power);
-	retval = rndis_query_oid(usbdev, OID_802_11_TX_POWER_LEVEL, &tx_power,
-									&len);
-	if (retval == 0 && le32_to_cpu(tx_power) != 0xFF)
-		priv->caps |= CAP_SUPPORT_TXPOWER;
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	/* determine supported modes */
 	len = sizeof(networks_supported);
@@ -2326,24 +2160,18 @@ static int rndis_wext_get_caps(struct usbnet *usbdev)
 			n = 8;
 		for (i = 0; i < n; i++) {
 			switch (le32_to_cpu(networks_supported.items[i])) {
-			case ndis_80211_type_freq_hop:
-			case ndis_80211_type_direct_seq:
+			case NDIS_80211_TYPE_FREQ_HOP:
+			case NDIS_80211_TYPE_DIRECT_SEQ:
 				priv->caps |= CAP_MODE_80211B;
 				break;
-			case ndis_80211_type_ofdm_a:
+			case NDIS_80211_TYPE_OFDM_A:
 				priv->caps |= CAP_MODE_80211A;
 				break;
-			case ndis_80211_type_ofdm_g:
+			case NDIS_80211_TYPE_OFDM_G:
 				priv->caps |= CAP_MODE_80211G;
 				break;
 			}
 		}
-		if (priv->caps & CAP_MODE_80211A)
-			strcat(priv->name, "a");
-		if (priv->caps & CAP_MODE_80211B)
-			strcat(priv->name, "b");
-		if (priv->caps & CAP_MODE_80211G)
-			strcat(priv->name, "g");
 	}
 
 	return retval;
@@ -2353,8 +2181,8 @@ static int rndis_wext_get_caps(struct usbnet *usbdev)
 #define STATS_UPDATE_JIFFIES (HZ)
 static void rndis_update_wireless_stats(struct work_struct *work)
 {
-	struct rndis_wext_private *priv =
-		container_of(work, struct rndis_wext_private, stats_work.work);
+	struct rndis_wlan_private *priv =
+		container_of(work, struct rndis_wlan_private, stats_work.work);
 	struct usbnet *usbdev = priv->usbdev;
 	struct iw_statistics iwstats;
 	__le32 rssi, tmp;
@@ -2387,7 +2215,7 @@ static void rndis_update_wireless_stats(struct work_struct *work)
 	if (ret == 0) {
 		memset(&iwstats.qual, 0, sizeof(iwstats.qual));
 		iwstats.qual.qual  = level_to_qual(le32_to_cpu(rssi));
-		iwstats.qual.level = le32_to_cpu(rssi);
+		iwstats.qual.level = level_to_qual(le32_to_cpu(rssi));
 		iwstats.qual.updated = IW_QUAL_QUAL_UPDATED
 				| IW_QUAL_LEVEL_UPDATED
 				| IW_QUAL_NOISE_INVALID;
@@ -2457,9 +2285,19 @@ end:
 }
 
 
-static int bcm4320_early_init(struct usbnet *usbdev)
+static int bcm4320a_early_init(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	/* bcm4320a doesn't handle configuration parameters well. Try
+	 * set any and you get partially zeroed mac and broken device.
+	 */
+
+	return 0;
+}
+
+
+static int bcm4320b_early_init(struct usbnet *usbdev)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	char buf[8];
 
 	/* Early initialization settings, setting these won't have effect
@@ -2525,33 +2363,41 @@ static int bcm4320_early_init(struct usbnet *usbdev)
 }
 
 /* same as rndis_netdev_ops but with local multicast handler */
-static const struct net_device_ops rndis_wext_netdev_ops = {
+static const struct net_device_ops rndis_wlan_netdev_ops = {
 	.ndo_open		= usbnet_open,
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= rndis_wext_set_multicast_list,
+	.ndo_set_multicast_list	= rndis_wlan_set_multicast_list,
 };
 
 
-static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
+static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
 {
-	struct rndis_wext_private *priv;
+	struct wiphy *wiphy;
+	struct rndis_wlan_private *priv;
 	int retval, len;
 	__le32 tmp;
 
-	/* allocate rndis private data */
-	priv = kzalloc(sizeof(struct rndis_wext_private), GFP_KERNEL);
-	if (!priv)
+	/* allocate wiphy and rndis private data
+	 * NOTE: We only support a single virtual interface, so wiphy
+	 * and wireless_dev are somewhat synonymous for this device.
+	 */
+	wiphy = wiphy_new(&rndis_config_ops, sizeof(struct rndis_wlan_private));
+	if (!wiphy)
 		return -ENOMEM;
 
+	priv = wiphy_priv(wiphy);
+	usbdev->net->ieee80211_ptr = &priv->wdev;
+	priv->wdev.wiphy = wiphy;
+	priv->wdev.iftype = NL80211_IFTYPE_STATION;
+
 	/* These have to be initialized before calling generic_rndis_bind().
-	 * Otherwise we'll be in big trouble in rndis_wext_early_init().
+	 * Otherwise we'll be in big trouble in rndis_wlan_early_init().
 	 */
 	usbdev->driver_priv = priv;
-	strcpy(priv->name, "IEEE802.11");
 	usbdev->net->wireless_handlers = &rndis_iw_handlers;
 	priv->usbdev = usbdev;
 
@@ -2560,8 +2406,9 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 
 	/* because rndis_command() sleeps we need to use workqueue */
 	priv->workqueue = create_singlethread_workqueue("rndis_wlan");
-	INIT_WORK(&priv->work, rndis_wext_worker);
+	INIT_WORK(&priv->work, rndis_wlan_worker);
 	INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+	INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results);
 
 	/* try bind rndis_host */
 	retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS);
@@ -2573,9 +2420,9 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 	 * picks up rssi to closest station instead of to access point).
 	 *
 	 * rndis_host wants to avoid all OID as much as possible
-	 * so do promisc/multicast handling in rndis_wext.
+	 * so do promisc/multicast handling in rndis_wlan.
 	 */
-	usbdev->net->netdev_ops = &rndis_wext_netdev_ops;
+	usbdev->net->netdev_ops = &rndis_wlan_netdev_ops;
 
 	tmp = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
 	retval = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &tmp,
@@ -2600,7 +2447,32 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 					| IW_QUAL_QUAL_INVALID
 					| IW_QUAL_LEVEL_INVALID;
 
-	rndis_wext_get_caps(usbdev);
+	/* fill-out wiphy structure and register w/ cfg80211 */
+	memcpy(wiphy->perm_addr, usbdev->net->dev_addr, ETH_ALEN);
+	wiphy->privid = rndis_wiphy_privid;
+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
+					| BIT(NL80211_IFTYPE_ADHOC);
+	wiphy->max_scan_ssids = 1;
+
+	/* TODO: fill-out band information based on priv->caps */
+	rndis_wlan_get_caps(usbdev);
+
+	memcpy(priv->channels, rndis_channels, sizeof(rndis_channels));
+	memcpy(priv->rates, rndis_rates, sizeof(rndis_rates));
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(rndis_channels);
+	priv->band.bitrates = priv->rates;
+	priv->band.n_bitrates = ARRAY_SIZE(rndis_rates);
+	wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+	wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+
+	set_wiphy_dev(wiphy, &usbdev->udev->dev);
+
+	if (wiphy_register(wiphy)) {
+		retval = -ENODEV;
+		goto fail;
+	}
+
 	set_default_iw_params(usbdev);
 
 	/* turn radio on */
@@ -2615,36 +2487,40 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 
 fail:
 	cancel_delayed_work_sync(&priv->stats_work);
+	cancel_delayed_work_sync(&priv->scan_work);
 	cancel_work_sync(&priv->work);
 	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 
-	kfree(priv);
+	wiphy_free(wiphy);
 	return retval;
 }
 
 
-static void rndis_wext_unbind(struct usbnet *usbdev, struct usb_interface *intf)
+static void rndis_wlan_unbind(struct usbnet *usbdev, struct usb_interface *intf)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	/* turn radio off */
 	disassociate(usbdev, 0);
 
 	cancel_delayed_work_sync(&priv->stats_work);
+	cancel_delayed_work_sync(&priv->scan_work);
 	cancel_work_sync(&priv->work);
 	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 
 	if (priv && priv->wpa_ie_len)
 		kfree(priv->wpa_ie);
-	kfree(priv);
 
 	rndis_unbind(usbdev, intf);
+
+	wiphy_unregister(priv->wdev.wiphy);
+	wiphy_free(priv->wdev.wiphy);
 }
 
 
-static int rndis_wext_reset(struct usbnet *usbdev)
+static int rndis_wlan_reset(struct usbnet *usbdev)
 {
 	return deauthenticate(usbdev);
 }
@@ -2653,40 +2529,40 @@ static int rndis_wext_reset(struct usbnet *usbdev)
 static const struct driver_info	bcm4320b_info = {
 	.description =	"Wireless RNDIS device, BCM4320b based",
 	.flags =	FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_wext_bind,
-	.unbind =	rndis_wext_unbind,
+	.bind =		rndis_wlan_bind,
+	.unbind =	rndis_wlan_unbind,
 	.status =	rndis_status,
 	.rx_fixup =	rndis_rx_fixup,
 	.tx_fixup =	rndis_tx_fixup,
-	.reset =	rndis_wext_reset,
-	.early_init =	bcm4320_early_init,
-	.link_change =	rndis_wext_link_change,
+	.reset =	rndis_wlan_reset,
+	.early_init =	bcm4320b_early_init,
+	.link_change =	rndis_wlan_link_change,
 };
 
 static const struct driver_info	bcm4320a_info = {
 	.description =	"Wireless RNDIS device, BCM4320a based",
 	.flags =	FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_wext_bind,
-	.unbind =	rndis_wext_unbind,
+	.bind =		rndis_wlan_bind,
+	.unbind =	rndis_wlan_unbind,
 	.status =	rndis_status,
 	.rx_fixup =	rndis_rx_fixup,
 	.tx_fixup =	rndis_tx_fixup,
-	.reset =	rndis_wext_reset,
-	.early_init =	bcm4320_early_init,
-	.link_change =	rndis_wext_link_change,
+	.reset =	rndis_wlan_reset,
+	.early_init =	bcm4320a_early_init,
+	.link_change =	rndis_wlan_link_change,
 };
 
-static const struct driver_info rndis_wext_info = {
+static const struct driver_info rndis_wlan_info = {
 	.description =	"Wireless RNDIS device",
 	.flags =	FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_wext_bind,
-	.unbind =	rndis_wext_unbind,
+	.bind =		rndis_wlan_bind,
+	.unbind =	rndis_wlan_unbind,
 	.status =	rndis_status,
 	.rx_fixup =	rndis_rx_fixup,
 	.tx_fixup =	rndis_tx_fixup,
-	.reset =	rndis_wext_reset,
-	.early_init =	bcm4320_early_init,
-	.link_change =	rndis_wext_link_change,
+	.reset =	rndis_wlan_reset,
+	.early_init =	bcm4320a_early_init,
+	.link_change =	rndis_wlan_link_change,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -2796,11 +2672,11 @@ static const struct usb_device_id products [] = {
 {
 	/* RNDIS is MSFT's un-official variant of CDC ACM */
 	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
-	.driver_info = (unsigned long) &rndis_wext_info,
+	.driver_info = (unsigned long) &rndis_wlan_info,
 }, {
 	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
-	.driver_info = (unsigned long) &rndis_wext_info,
+	.driver_info = (unsigned long) &rndis_wlan_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..8aab3e6754b 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
 
 	  When building one of the individual drivers, the rt2x00 library
 	  will also be created. That library (when the driver is built as
-	  a module) will be called "rt2x00lib.ko".
+	  a module) will be called rt2x00lib.
 
 	  Additionally PCI and USB libraries will also be build depending
 	  on the types of drivers being selected, these libraries will be
-	  called "rt2x00pci.ko" and "rt2x00usb.ko".
+	  called rt2x00pci and rt2x00usb.
 
 if RT2X00
 
@@ -26,7 +26,7 @@ config RT2400PCI
 	  This adds support for rt2400 wireless chipset family.
 	  Supported chips: RT2460.
 
-	  When compiled as a module, this driver will be called "rt2400pci.ko".
+	  When compiled as a module, this driver will be called rt2400pci.
 
 config RT2500PCI
 	tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2560.
 
-	  When compiled as a module, this driver will be called "rt2500pci.ko".
+	  When compiled as a module, this driver will be called rt2500pci.
 
 config RT61PCI
 	tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2561, RT2561S & RT2661.
 
-	  When compiled as a module, this driver will be called "rt61pci.ko".
+	  When compiled as a module, this driver will be called rt61pci.
 
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2571 & RT2572.
 
-	  When compiled as a module, this driver will be called "rt2500usb.ko".
+	  When compiled as a module, this driver will be called rt2500usb.
 
 config RT73USB
 	tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,21 @@ config RT73USB
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2571W, RT2573 & RT2671.
 
-	  When compiled as a module, this driver will be called "rt73usb.ko".
+	  When compiled as a module, this driver will be called rt73usb.
+
+config RT2800USB
+	tristate "Ralink rt2800 (USB) support"
+	depends on USB
+	select RT2X00_LIB_USB
+	select RT2X00_LIB_HT
+	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_CRYPTO
+	select CRC_CCITT
+	---help---
+	  This adds support for rt2800 wireless chipset family.
+	  Supported chips: RT2770, RT2870 & RT3070.
+
+	  When compiled as a module, this driver will be called "rt2800usb.ko".
 
 config RT2X00_LIB_PCI
 	tristate
@@ -88,6 +102,9 @@ config RT2X00_LIB_USB
 config RT2X00_LIB
 	tristate
 
+config RT2X00_LIB_HT
+	boolean
+
 config RT2X00_LIB_FIRMWARE
 	boolean
 	select FW_LOADER
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index f22d808d8c5..bfc7226f0af 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -8,6 +8,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL)	+= rt2x00rfkill.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS)	+= rt2x00leds.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_HT)	+= rt2x00ht.o
 
 obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
 obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
@@ -17,3 +18,4 @@ obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
 obj-$(CONFIG_RT61PCI)			+= rt61pci.o
 obj-$(CONFIG_RT2500USB)			+= rt2500usb.o
 obj-$(CONFIG_RT73USB)			+= rt73usb.o
+obj-$(CONFIG_RT2800USB)			+= rt2800usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 0f08773328c..435f945fe64 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -335,10 +335,11 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	preamble_mask = erp->short_preamble << 3;
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
-			   erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
 	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 			   erp->ack_consume_time);
+	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 
 	rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
@@ -371,6 +372,11 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 
+	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
+	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, erp->beacon_int * 16);
+	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
+
 	rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 	rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
 	rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
@@ -503,24 +509,6 @@ static void rt2400pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 }
 
-static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
-	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
-
-	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
-	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
-			   libconf->conf->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
-}
-
 static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -532,7 +520,7 @@ static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 		rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
-				   (libconf->conf->beacon_int - 20) * 16);
+				   (rt2x00dev->beacon_int - 20) * 16);
 		rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 
@@ -558,8 +546,6 @@ static void rt2400pci_config(struct rt2x00_dev *rt2x00dev,
 					 libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt2400pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt2400pci_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt2400pci_config_ps(rt2x00dev, libconf);
 }
@@ -1361,7 +1347,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
@@ -1580,7 +1566,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 276a8232aaa..08b30d01e67 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -341,10 +341,11 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	preamble_mask = erp->short_preamble << 3;
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
-			   erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
 	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 			   erp->ack_consume_time);
+	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 
 	rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
@@ -377,6 +378,11 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 
+	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
+	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, erp->beacon_int * 16);
+	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
+
 	rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 	rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
 	rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
@@ -552,24 +558,6 @@ static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 }
 
-static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
-	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
-
-	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
-	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
-			   libconf->conf->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
-}
-
 static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -581,7 +569,7 @@ static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 		rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
-				   (libconf->conf->beacon_int - 20) * 16);
+				   (rt2x00dev->beacon_int - 20) * 16);
 		rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 
@@ -609,8 +597,6 @@ static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
 					 libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt2500pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt2500pci_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt2500pci_config_ps(rt2x00dev, libconf);
 }
@@ -1525,7 +1511,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
@@ -1879,7 +1865,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9e630e70fc9..66daf68ff0e 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -503,6 +503,10 @@ static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates);
 
+	rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
+	rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL, erp->beacon_int * 4);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
+
 	rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs);
@@ -632,17 +636,6 @@ static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 	rt2500usb_rf_write(rt2x00dev, 3, rf3);
 }
 
-static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u16 reg;
-
-	rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
-	rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
-			   libconf->conf->beacon_int * 4);
-	rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
-}
-
 static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -654,7 +647,7 @@ static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 		rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON,
-				   libconf->conf->beacon_int - 20);
+				   rt2x00dev->beacon_int - 20);
 		rt2x00_set_field16(&reg, MAC_CSR18_BEACONS_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 
@@ -680,8 +673,6 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 	    !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 		rt2500usb_config_txpower(rt2x00dev,
 					 libconf->conf->power_level);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt2500usb_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt2500usb_config_ps(rt2x00dev, libconf);
 }
@@ -1559,7 +1550,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
@@ -1908,7 +1899,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
new file mode 100644
index 00000000000..37561667925
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -0,0 +1,3078 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800usb
+	Abstract: rt2800usb device specific routines.
+	Supported chipsets: RT2800U.
+ */
+
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "rt2x00.h"
+#include "rt2x00usb.h"
+#include "rt2800usb.h"
+
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 1;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2x00usb_register_read and rt2x00usb_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * The _lock versions must be used if you already hold the csr_mutex
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			       H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
+				const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
+
+		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+				  const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+				 const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_RFCSR(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, const u32 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
+		rt2x00_rf_write(rt2x00dev, word, value);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
+				  const u8 command, const u8 token,
+				  const u8 arg0, const u8 arg1)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the MCU becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
+		rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+		reg = 0;
+		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
+		rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800usb_rt2x00debug = {
+	.owner	= THIS_MODULE,
+	.csr	= {
+		.read		= rt2x00usb_register_read,
+		.write		= rt2x00usb_register_write,
+		.flags		= RT2X00DEBUGFS_OFFSET,
+		.word_base	= CSR_REG_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= CSR_REG_SIZE / sizeof(u32),
+	},
+	.eeprom	= {
+		.read		= rt2x00_eeprom_read,
+		.write		= rt2x00_eeprom_write,
+		.word_base	= EEPROM_BASE,
+		.word_size	= sizeof(u16),
+		.word_count	= EEPROM_SIZE / sizeof(u16),
+	},
+	.bbp	= {
+		.read		= rt2800usb_bbp_read,
+		.write		= rt2800usb_bbp_write,
+		.word_base	= BBP_BASE,
+		.word_size	= sizeof(u8),
+		.word_count	= BBP_SIZE / sizeof(u8),
+	},
+	.rf	= {
+		.read		= rt2x00_rf_read,
+		.write		= rt2800usb_rf_write,
+		.word_base	= RF_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= RF_SIZE / sizeof(u32),
+	},
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+#else
+#define rt2800usb_rfkill_poll	NULL
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
+				     enum led_brightness brightness)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	unsigned int enabled = brightness != LED_OFF;
+	unsigned int bg_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	unsigned int polarity =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_POLARITY);
+	unsigned int ledmode =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_MODE);
+
+	if (led->type == LED_TYPE_RADIO) {
+		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? 0x20 : 0);
+	} else if (led->type == LED_TYPE_ASSOC) {
+		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+	} else if (led->type == LED_TYPE_QUALITY) {
+		/*
+		 * The brightness is divided into 6 levels (0 - 5),
+		 * The specs tell us the following levels:
+		 *	0, 1 ,3, 7, 15, 31
+		 * to determine the level in a simple way we can simply
+		 * work with bitshifting:
+		 *	(1 << level) - 1
+		 */
+		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+				      (1 << brightness / (LED_FULL / 6)) - 1,
+				      polarity);
+	}
+}
+
+static int rt2800usb_blink_set(struct led_classdev *led_cdev,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	u32 reg;
+
+	rt2x00usb_register_read(led->rt2x00dev, LED_CFG, &reg);
+	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+	rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
+
+	return 0;
+}
+
+static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00_led *led,
+			       enum led_type type)
+{
+	led->rt2x00dev = rt2x00dev;
+	led->type = type;
+	led->led_dev.brightness_set = rt2800usb_brightness_set;
+	led->led_dev.blink_set = rt2800usb_blink_set;
+	led->flags = LED_INITIALIZED;
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct mac_wcid_entry wcid_entry;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+	u32 reg;
+
+	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+			   (crypto->cmd == SET_KEY) * crypto->bssidx);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+	if ((crypto->cipher == CIPHER_TKIP) ||
+	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+	    (crypto->cipher == CIPHER_AES))
+		iveiv_entry.iv[3] |= 0x20;
+	iveiv_entry.iv[3] |= key->keyidx << 6;
+	rt2x00usb_register_multiwrite(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+	memset(&wcid_entry, 0, sizeof(wcid_entry));
+	if (crypto->cmd == SET_KEY)
+		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+	rt2x00usb_register_multiwrite(rt2x00dev, offset,
+				      &wcid_entry, sizeof(wcid_entry));
+}
+
+static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	int timeout;
+	u32 offset;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+						    USB_VENDOR_REQUEST_OUT,
+						    offset, &key_entry,
+						    sizeof(key_entry),
+						    timeout);
+	}
+
+	/*
+	 * The cipher types are stored over multiple registers
+	 * starting with SHARED_KEY_MODE_BASE each word will have
+	 * 32 bits and contains the cipher types for 2 bssidx each.
+	 * Using the correct defines correctly will cause overhead,
+	 * so just calculate the correct offset.
+	 */
+	field.bit_offset = 4 * (key->hw_key_idx % 8);
+	field.bit_mask = 0x7 << field.bit_offset;
+
+	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+
+static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+					 struct rt2x00lib_crypto *crypto,
+					 struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	int timeout;
+	u32 offset;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * 1 pairwise key is possible per AID, this means that the AID
+		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
+		 * last possible shared key entry.
+		 */
+		if (crypto->aid > (256 - 32))
+			return -ENOSPC;
+
+		key->hw_key_idx = 32 + crypto->aid;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+						    USB_VENDOR_REQUEST_OUT,
+						    offset, &key_entry,
+						    sizeof(key_entry),
+						    timeout);
+	}
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+
+static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int filter_flags)
+{
+	u32 reg;
+
+	/*
+	 * Start configuration steps.
+	 * Note that the version error will always be dropped
+	 * and broadcast frames will always be accepted since
+	 * there is no filter for it at this time.
+	 */
+	rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+			   !(filter_flags & FIF_FCSFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+			   !(filter_flags & FIF_PLCPFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+			   !(filter_flags & FIF_PROMISC_IN_BSS));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+			   !(filter_flags & FIF_ALLMULTI));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+
+static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
+				  struct rt2x00_intf *intf,
+				  struct rt2x00intf_conf *conf,
+				  const unsigned int flags)
+{
+	unsigned int beacon_base;
+	u32 reg;
+
+	if (flags & CONFIG_UPDATE_TYPE) {
+		/*
+		 * Clear current synchronisation setup.
+		 * For the Beacon base registers we only need to clear
+		 * the first byte since that byte contains the VALID and OWNER
+		 * bits which (when set to 0) will invalidate the entire beacon.
+		 */
+		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+		rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
+
+		/*
+		 * Enable synchronisation.
+		 */
+		rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+
+	if (flags & CONFIG_UPDATE_MAC) {
+		reg = le32_to_cpu(conf->mac[1]);
+		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+		conf->mac[1] = cpu_to_le32(reg);
+
+		rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+					      conf->mac, sizeof(conf->mac));
+	}
+
+	if (flags & CONFIG_UPDATE_BSSID) {
+		reg = le32_to_cpu(conf->bssid[1]);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+		conf->bssid[1] = cpu_to_le32(reg);
+
+		rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+					      conf->bssid, sizeof(conf->bssid));
+	}
+}
+
+static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
+				 struct rt2x00lib_erp *erp)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
+			   DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
+	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+			   !!erp->short_preamble);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+			   !!erp->short_preamble);
+	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+			   erp->cts_protection ? 2 : 0);
+	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+				 erp->basic_rates);
+	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+	rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+	rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+
+static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
+				 struct antenna_setup *ant)
+{
+	u8 r1;
+	u8 r3;
+
+	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
+	rt2800usb_bbp_read(rt2x00dev, 3, &r3);
+
+	/*
+	 * Configure the TX antenna.
+	 */
+	switch ((int)ant->tx) {
+	case 1:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+		break;
+	case 3:
+		/* Do nothing */
+		break;
+	}
+
+	/*
+	 * Configure the RX antenna.
+	 */
+	switch ((int)ant->rx) {
+	case 1:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+		break;
+	case 3:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+		break;
+	}
+
+	rt2800usb_bbp_write(rt2x00dev, 3, r3);
+	rt2800usb_bbp_write(rt2x00dev, 1, r1);
+}
+
+static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				      struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain;
+
+	if (libconf->rf.channel <= 14) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+	} else if (libconf->rf.channel <= 64) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+	} else if (libconf->rf.channel <= 128) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf,
+					  struct rf_channel *rf,
+					  struct channel_info *info)
+{
+	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+	if (rt2x00dev->default_ant.tx == 1)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+	if (rt2x00dev->default_ant.rx == 1) {
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+	} else if (rt2x00dev->default_ant.rx == 2)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+	if (rf->channel > 14) {
+		/*
+		 * When TX power is below 0, we should increase it by 7 to
+		 * make it a positive value (Minumum value is -7).
+		 * However this means that values between 0 and 7 have
+		 * double meaning, and we should set a 7DBm boost flag.
+		 */
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power1 >= 0));
+
+		if (info->tx_power1 < 0)
+			info->tx_power1 += 7;
+
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power1));
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power2 >= 0));
+
+		if (info->tx_power2 < 0)
+			info->tx_power2 += 7;
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power2));
+	} else {
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power1));
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power2));
+	}
+
+	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf,
+					  struct rf_channel *rf,
+					  struct channel_info *info)
+{
+	u8 rfcsr;
+
+	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
+	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+	rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+			  TXPOWER_G_TO_DEV(info->tx_power1));
+	rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+	rt2800usb_rfcsr_write(rt2x00dev, 24,
+			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
+				     struct ieee80211_conf *conf,
+				     struct rf_channel *rf,
+				     struct channel_info *info)
+{
+	u32 reg;
+	unsigned int tx_pin;
+	u8 bbp;
+
+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
+	else
+		rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+	/*
+	 * Change BBP settings
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+	rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+	rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+	rt2800usb_bbp_write(rt2x00dev, 86, 0);
+
+	if (rf->channel <= 14) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+			rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
+		} else {
+			rt2800usb_bbp_write(rt2x00dev, 82, 0x84);
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+		}
+	} else {
+		rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
+
+		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
+		else
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+	}
+
+	rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+	rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+	tx_pin = 0;
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.tx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+	}
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.rx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+	}
+
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800usb_bbp_read(rt2x00dev, 3, &bbp);
+	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2800usb_bbp_write(rt2x00dev, 3, bbp);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		if (conf_is_ht40(conf)) {
+			rt2800usb_bbp_write(rt2x00dev, 69, 0x1a);
+			rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+			rt2800usb_bbp_write(rt2x00dev, 73, 0x16);
+		} else {
+			rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+			rt2800usb_bbp_write(rt2x00dev, 70, 0x08);
+			rt2800usb_bbp_write(rt2x00dev, 73, 0x11);
+		}
+	}
+
+	msleep(1);
+}
+
+static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
+				     const int txpower)
+{
+	u32 reg;
+	u32 value = TXPOWER_G_TO_DEV(txpower);
+	u8 r1;
+
+	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
+	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2800usb_bbp_write(rt2x00dev, 1, r1);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+					 struct rt2x00lib_conf *libconf)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+			   libconf->conf->short_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+			   libconf->conf->long_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+	rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
+				struct rt2x00lib_conf *libconf)
+{
+	enum dev_state state =
+	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
+		STATE_SLEEP : STATE_AWAKE;
+	u32 reg;
+
+	if (state == STATE_SLEEP) {
+		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+				   libconf->conf->listen_interval - 1);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+	} else {
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+	}
+}
+
+static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_conf *libconf,
+			     const unsigned int flags)
+{
+	/* Always recalculate LNA gain before changing configuration */
+	rt2800usb_config_lna_gain(rt2x00dev, libconf);
+
+	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+		rt2800usb_config_channel(rt2x00dev, libconf->conf,
+					 &libconf->rf, &libconf->channel);
+	if (flags & IEEE80211_CONF_CHANGE_POWER)
+		rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
+	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+		rt2800usb_config_retry_limit(rt2x00dev, libconf);
+	if (flags & IEEE80211_CONF_CHANGE_PS)
+		rt2800usb_config_ps(rt2x00dev, libconf);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
+				 struct link_qual *qual)
+{
+	u32 reg;
+
+	/*
+	 * Update FCS error count from register.
+	 */
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+
+static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+		if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+			return 0x1c + (2 * rt2x00dev->lna_gain);
+		else
+			return 0x2e + rt2x00dev->lna_gain;
+	}
+
+	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+	else
+		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
+				     struct link_qual *qual, u8 vgc_level)
+{
+	if (qual->vgc_level != vgc_level) {
+		rt2800usb_bbp_write(rt2x00dev, 66, vgc_level);
+		qual->vgc_level = vgc_level;
+		qual->vgc_level_reg = vgc_level;
+	}
+}
+
+static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
+				  struct link_qual *qual)
+{
+	rt2800usb_set_vgc(rt2x00dev, qual,
+			  rt2800usb_get_default_vgc(rt2x00dev));
+}
+
+static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
+				 struct link_qual *qual, const u32 count)
+{
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+		return;
+
+	/*
+	 * When RSSI is better then -80 increase VGC level with 0x10
+	 */
+	rt2800usb_set_vgc(rt2x00dev, qual,
+			  rt2800usb_get_default_vgc(rt2x00dev) +
+			  ((qual->rssi > -80) * 0x10));
+}
+
+/*
+ * Firmware functions
+ */
+static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
+{
+	return FIRMWARE_RT2870;
+}
+
+static bool rt2800usb_check_crc(const u8 *data, const size_t len)
+{
+	u16 fw_crc;
+	u16 crc;
+
+	/*
+	 * The last 2 bytes in the firmware array are the crc checksum itself,
+	 * this means that we should never pass those 2 bytes to the crc
+	 * algorithm.
+	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc ccitt algorithm.
+	 * This will return the same value as the legacy driver which
+	 * used bit ordering reversion on the both the firmware bytes
+	 * before input input as well as on the final output.
+	 * Obviously using crc ccitt directly is much more efficient.
+	 */
+	crc = crc_ccitt(~0, data, len - 2);
+
+	/*
+	 * There is a small difference between the crc-itu-t + bitrev and
+	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
+	 * will be swapped, use swab16 to convert the crc to the correct
+	 * value.
+	 */
+	crc = swab16(crc);
+
+	return fw_crc == crc;
+}
+
+static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
+				    const u8 *data, const size_t len)
+{
+	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+	size_t offset = 0;
+
+	/*
+	 * Firmware files:
+	 * There are 2 variations of the rt2870 firmware.
+	 * a) size: 4kb
+	 * b) size: 8kb
+	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * within the file. The first blob is the same firmware as (a),
+	 * but the second blob is for the additional chipsets.
+	 */
+	if (len != 4096 && len != 8192)
+		return FW_BAD_LENGTH;
+
+	/*
+	 * Check if we need the upper 4kb firmware data or not.
+	 */
+	if ((len == 4096) &&
+	    (chipset != 0x2860) &&
+	    (chipset != 0x2872) &&
+	    (chipset != 0x3070))
+		return FW_BAD_VERSION;
+
+	/*
+	 * 8kb firmware files must be checked as if it were
+	 * 2 seperate firmware files.
+	 */
+	while (offset < len) {
+		if (!rt2800usb_check_crc(data + offset, 4096))
+			return FW_BAD_CRC;
+
+		offset += 4096;
+	}
+
+	return FW_OK;
+}
+
+static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
+				   const u8 *data, const size_t len)
+{
+	unsigned int i;
+	int status;
+	u32 reg;
+	u32 offset;
+	u32 length;
+	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+
+	/*
+	 * Check which section of the firmware we need.
+	 */
+	if ((chipset == 0x2860) ||
+	    (chipset == 0x2872) ||
+	    (chipset == 0x3070)) {
+		offset = 0;
+		length = 4096;
+	} else {
+		offset = 4096;
+		length = 4096;
+	}
+
+	/*
+	 * Wait for stable hardware.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Write firmware to device.
+	 */
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT,
+					    FIRMWARE_IMAGE_BASE,
+					    data + offset, length,
+					    REGISTER_TIMEOUT32(length));
+
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+
+	/*
+	 * Send firmware request to device to load firmware,
+	 * we need to specify a long timeout time.
+	 */
+	status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
+					     0, USB_MODE_FIRMWARE,
+					     REGISTER_TIMEOUT_FIRMWARE);
+	if (status < 0) {
+		ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
+		return status;
+	}
+
+	msleep(10);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+
+	/*
+	 * Send signal to firmware during boot time.
+	 */
+	rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+
+	if ((chipset == 0x3070) ||
+	    (chipset == 0x3071) ||
+	    (chipset == 0x3572)) {
+		udelay(200);
+		rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
+		udelay(10);
+	}
+
+	/*
+	 * Wait for device to stabilize.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "PBF system register not ready.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Initialize firmware.
+	 */
+	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	return 0;
+}
+
+/*
+ * Initialization functions.
+ */
+static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	unsigned int i;
+
+	/*
+	 * Wait untill BBP and RF are ready.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+	rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+
+	rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+				    USB_MODE_RESET, REGISTER_TIMEOUT);
+
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
+	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
+	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
+	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+	} else {
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+	}
+
+	rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
+	rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
+	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
+	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
+	else
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+	rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
+	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
+	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+
+	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
+	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+	rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
+	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+			   IEEE80211_MAX_RTS_THRESHOLD);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
+	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	/*
+	 * ASIC will keep garbage value after boot, clear encryption keys.
+	 */
+	for (i = 0; i < 256; i++) {
+		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+		rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+					      wcid, sizeof(wcid));
+
+		rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+		rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
+	}
+
+	for (i = 0; i < 16; i++)
+		rt2x00usb_register_write(rt2x00dev,
+					 SHARED_KEY_MODE_ENTRY(i), 0);
+
+	/*
+	 * Clear all beacons
+	 * For the Beacon base registers we only need to clear
+	 * the first byte since that byte contains the VALID and OWNER
+	 * bits which (when set to 0) will invalidate the entire beacon.
+	 */
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+
+	rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
+	rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
+	rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
+	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
+	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
+	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 3);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
+	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
+	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+	/*
+	 * We must clear the error counters.
+	 * These registers are cleared on read,
+	 * so we may pass a useless variable to store the value.
+	 */
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
+	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
+	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
+	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+	return 0;
+}
+
+static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+			return 0;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u8 value;
+
+	/*
+	 * BBP was enabled after firmware was loaded,
+	 * but we need to reactivate it now.
+	 */
+	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800usb_bbp_read(rt2x00dev, 0, &value);
+		if ((value != 0xff) && (value != 0x00))
+			return 0;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u16 eeprom;
+	u8 reg_id;
+	u8 value;
+
+	if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
+		     rt2800usb_wait_bbp_ready(rt2x00dev)))
+		return -EACCES;
+
+	rt2800usb_bbp_write(rt2x00dev, 65, 0x2c);
+	rt2800usb_bbp_write(rt2x00dev, 66, 0x38);
+	rt2800usb_bbp_write(rt2x00dev, 69, 0x12);
+	rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+	rt2800usb_bbp_write(rt2x00dev, 73, 0x10);
+	rt2800usb_bbp_write(rt2x00dev, 81, 0x37);
+	rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
+	rt2800usb_bbp_write(rt2x00dev, 83, 0x6a);
+	rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
+	rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
+	rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
+	rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
+	rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
+	rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+		rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
+		rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+		rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
+		rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+	}
+
+	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+		if (eeprom != 0xffff && eeprom != 0x0000) {
+			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+			rt2800usb_bbp_write(rt2x00dev, reg_id, value);
+		}
+	}
+
+	return 0;
+}
+
+static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+				   bool bw40, u8 rfcsr24, u8 filter_target)
+{
+	unsigned int i;
+	u8 bbp;
+	u8 rfcsr;
+	u8 passband;
+	u8 stopband;
+	u8 overtuned = 0;
+
+	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set power & frequency of passband test tone
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 24, 0);
+
+	for (i = 0; i < 100; i++) {
+		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800usb_bbp_read(rt2x00dev, 55, &passband);
+		if (passband)
+			break;
+	}
+
+	/*
+	 * Set power & frequency of stopband test tone
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
+
+	for (i = 0; i < 100; i++) {
+		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
+
+		if ((passband - stopband) <= filter_target) {
+			rfcsr24++;
+			overtuned += ((passband - stopband) == filter_target);
+		} else
+			break;
+
+		rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	}
+
+	rfcsr24 -= !!overtuned;
+
+	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	return rfcsr24;
+}
+
+static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfcsr;
+	u8 bbp;
+
+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		return 0;
+
+	/*
+	 * Init RF calibration.
+	 */
+	rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+	rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
+	rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
+	rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
+	rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
+	rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
+	rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
+	rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
+	rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
+	rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
+	rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
+	rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
+	rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
+	rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
+	rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
+	rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
+	rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
+	rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
+	rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
+	rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
+	rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
+
+	/*
+	 * Set RX Filter calibration for 20MHz and 40MHz
+	 */
+	rt2x00dev->calibration[0] =
+	    rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+	rt2x00dev->calibration[1] =
+	    rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * set BBP back to BW20
+	 */
+	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+	return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
+				enum dev_state state)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
+			   (state == STATE_RADIO_RX_ON) ||
+			   (state == STATE_RADIO_RX_ON_LINK));
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+}
+
+static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 word;
+
+	/*
+	 * Initialize all registers.
+	 */
+	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800usb_init_registers(rt2x00dev) ||
+		     rt2800usb_init_bbp(rt2x00dev) ||
+		     rt2800usb_init_rfcsr(rt2x00dev)))
+		return -EIO;
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	udelay(50);
+
+	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+
+	rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
+	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
+	/* Don't use bulk in aggregation when working with USB 1.1 */
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
+			   (rt2x00dev->rx->usb_maxpacket == 512));
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
+	/*
+	 * Total room for RX frames in kilobytes, PBF might still exceed
+	 * this limit so reduce the number to prevent errors.
+	 */
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
+			   ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
+	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
+	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	/*
+	 * Initialize LED control
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
+	rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
+	rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
+	rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	return 0;
+}
+
+static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+	/* Wait for DMA, ignore error */
+	rt2800usb_wait_wpdma_ready(rt2x00dev);
+
+	rt2x00usb_disable_radio(rt2x00dev);
+}
+
+static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
+			       enum dev_state state)
+{
+	if (state == STATE_AWAKE)
+		rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+	else
+		rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+	return 0;
+}
+
+static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
+				      enum dev_state state)
+{
+	int retval = 0;
+
+	switch (state) {
+	case STATE_RADIO_ON:
+		/*
+		 * Before the radio can be enabled, the device first has
+		 * to be woken up. After that it needs a bit of time
+		 * to be fully awake and the radio can be enabled.
+		 */
+		rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
+		msleep(1);
+		retval = rt2800usb_enable_radio(rt2x00dev);
+		break;
+	case STATE_RADIO_OFF:
+		/*
+		 * After the radio has been disablee, the device should
+		 * be put to sleep for powersaving.
+		 */
+		rt2800usb_disable_radio(rt2x00dev);
+		rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
+		break;
+	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+	case STATE_RADIO_RX_OFF:
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2800usb_toggle_rx(rt2x00dev, state);
+		break;
+	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_OFF:
+		/* No support, but no error either */
+		break;
+	case STATE_DEEP_SLEEP:
+	case STATE_SLEEP:
+	case STATE_STANDBY:
+	case STATE_AWAKE:
+		retval = rt2800usb_set_state(rt2x00dev, state);
+		break;
+	default:
+		retval = -ENOTSUPP;
+		break;
+	}
+
+	if (unlikely(retval))
+		ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+		      state, retval);
+
+	return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+				    struct sk_buff *skb,
+				    struct txentry_desc *txdesc)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	__le32 *txi = skbdesc->desc;
+	__le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
+	u32 word;
+
+	/*
+	 * Initialize TX Info descriptor
+	 */
+	rt2x00_desc_read(txwi, 0, &word);
+	rt2x00_set_field32(&word, TXWI_W0_FRAG,
+			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+	rt2x00_set_field32(&word, TXWI_W0_TS,
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+	rt2x00_set_field32(&word, TXWI_W0_BW,
+			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+	rt2x00_desc_write(txwi, 0, word);
+
+	rt2x00_desc_read(txwi, 1, &word);
+	rt2x00_set_field32(&word, TXWI_W1_ACK,
+			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+			       txdesc->key_idx : 0xff);
+	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+			   skb->len - txdesc->l2pad);
+	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
+			   skbdesc->entry->entry_idx);
+	rt2x00_desc_write(txwi, 1, word);
+
+	/*
+	 * Always write 0 to IV/EIV fields, hardware will insert the IV
+	 * from the IVEIV register when TXINFO_W0_WIV is set to 0.
+	 * When TXINFO_W0_WIV is set to 1 it will use the IV data
+	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+	 * crypto entry in the registers should be used to encrypt the frame.
+	 */
+	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+
+	/*
+	 * Initialize TX descriptor
+	 */
+	rt2x00_desc_read(txi, 0, &word);
+	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
+			   skb->len + TXWI_DESC_SIZE);
+	rt2x00_set_field32(&word, TXINFO_W0_WIV,
+			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
+	rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
+	rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
+	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
+	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
+			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
+	rt2x00_desc_write(txi, 0, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2800usb_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Add the descriptor in front of the skb.
+	 */
+	skb_push(entry->skb, entry->queue->desc_size);
+	memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
+	skbdesc->desc = entry->skb->data;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	/*
+	 * Write entire beacon with descriptor to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT, beacon_base,
+					    entry->skb->data, entry->skb->len,
+					    REGISTER_TIMEOUT32(entry->skb->len));
+
+	/*
+	 * Clean up the beacon skb.
+	 */
+	dev_kfree_skb(entry->skb);
+	entry->skb = NULL;
+}
+
+static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+{
+	int length;
+
+	/*
+	 * The length _must_ include 4 bytes padding,
+	 * it should always be multiple of 4,
+	 * but it must _not_ be a multiple of the USB packet size.
+	 */
+	length = roundup(entry->skb->len + 4, 4);
+	length += (4 * !(length % entry->queue->usb_maxpacket));
+
+	return length;
+}
+
+static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid queue)
+{
+	u32 reg;
+
+	if (queue != QID_BEACON) {
+		rt2x00usb_kick_tx_queue(rt2x00dev, queue);
+		return;
+	}
+
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+}
+
+/*
+ * RX control handlers
+ */
+static void rt2800usb_fill_rxdone(struct queue_entry *entry,
+				  struct rxdone_entry_desc *rxdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	__le32 *rxd = (__le32 *)entry->skb->data;
+	__le32 *rxwi;
+	u32 rxd0;
+	u32 rxwi0;
+	u32 rxwi1;
+	u32 rxwi2;
+	u32 rxwi3;
+
+	/*
+	 * Copy descriptor to the skbdesc->desc buffer, making it safe from
+	 * moving of frame data in rt2x00usb.
+	 */
+	memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
+	rxd = (__le32 *)skbdesc->desc;
+	rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)];
+
+	/*
+	 * It is now safe to read the descriptor on all architectures.
+	 */
+	rt2x00_desc_read(rxd, 0, &rxd0);
+	rt2x00_desc_read(rxwi, 0, &rxwi0);
+	rt2x00_desc_read(rxwi, 1, &rxwi1);
+	rt2x00_desc_read(rxwi, 2, &rxwi2);
+	rt2x00_desc_read(rxwi, 3, &rxwi3);
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
+		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+		rxdesc->cipher_status =
+		    rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
+	}
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
+		/*
+		 * Hardware has stripped IV/EIV data from 802.11 frame during
+		 * decryption. Unfortunately the descriptor doesn't contain
+		 * any fields with the EIV/IV data either, so they can't
+		 * be restored by rt2x00lib.
+		 */
+		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+			rxdesc->flags |= RX_FLAG_DECRYPTED;
+		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
+		rxdesc->dev_flags |= RXDONE_MY_BSS;
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
+		rxdesc->dev_flags |= RXDONE_L2PAD;
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
+		rxdesc->flags |= RX_FLAG_SHORT_GI;
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
+		rxdesc->flags |= RX_FLAG_40MHZ;
+
+	/*
+	 * Detect RX rate, always use MCS as signal type.
+	 */
+	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
+	rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
+	rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
+
+	/*
+	 * Mask of 0x8 bit to remove the short preamble flag.
+	 */
+	if (rxdesc->rate_mode == RATE_MODE_CCK)
+		rxdesc->signal &= ~0x8;
+
+	rxdesc->rssi =
+	    (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
+	     rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
+
+	rxdesc->noise =
+	    (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
+	     rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
+
+	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+	/*
+	 * Remove RXWI descriptor from start of buffer.
+	 */
+	skb_pull(entry->skb, skbdesc->desc_len);
+	skb_trim(entry->skb, rxdesc->size);
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u16 word;
+	u8 *mac;
+	u8 default_lna_gain;
+
+	rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
+
+	/*
+	 * Start validation of the data that has been read.
+	 */
+	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+	if (!is_valid_ether_addr(mac)) {
+		DECLARE_MAC_BUF(macbuf);
+
+		random_ether_addr(mac);
+		EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
+	} else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+		/*
+		 * There is a max of 2 RX streams for RT2870 series
+		 */
+		if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
+			rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
+	if ((word & 0x00ff) == 0x00ff) {
+		rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
+				   LED_MODE_TXRX_ACTIVITY);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
+		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+	}
+
+	/*
+	 * During the LNA validation we are going to use
+	 * lna0 as correct value. Note that EEPROM_LNA
+	 * is never validated.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
+	default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+	return 0;
+}
+
+static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 value;
+	u16 eeprom;
+
+	/*
+	 * Read EEPROM word for configuration.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Identify RF chipset.
+	 */
+	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+	rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
+
+	/*
+	 * The check for rt2860 is not a typo, some rt2870 hardware
+	 * identifies itself as rt2860 in the CSR register.
+	 */
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) &&
+	    !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) &&
+	    !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) &&
+	    !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) {
+		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+		return -ENODEV;
+	}
+
+	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Identify default antenna configuration.
+	 */
+	rt2x00dev->default_ant.tx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
+	rt2x00dev->default_ant.rx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
+
+	/*
+	 * Read frequency offset and RF programming sequence.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
+
+	/*
+	 * Read external LNA informations.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
+		__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+
+	/*
+	 * Detect if this device has an hardware controlled radio.
+	 */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
+		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+	/*
+	 * Store led settings, for correct led behaviour.
+	 */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
+			   &rt2x00dev->led_mcu_reg);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+	return 0;
+}
+
+/*
+ * RF value list for rt2870
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
+ */
+static const struct rf_channel rf_vals[] = {
+	{ 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
+	{ 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
+	{ 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
+	{ 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
+	{ 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
+	{ 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
+	{ 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
+	{ 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
+	{ 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
+	{ 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
+	{ 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
+	{ 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
+	{ 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
+	{ 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
+
+	/* 802.11 UNI / HyperLan 2 */
+	{ 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
+	{ 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
+	{ 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
+	{ 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
+	{ 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
+	{ 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
+	{ 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
+	{ 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
+	{ 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
+	{ 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
+	{ 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
+	{ 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
+
+	/* 802.11 HyperLan 2 */
+	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
+	{ 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
+	{ 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
+	{ 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
+	{ 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
+	{ 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
+	{ 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
+	{ 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
+	{ 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
+	{ 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
+
+	/* 802.11 UNII */
+	{ 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
+	{ 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
+	{ 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
+	{ 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
+	{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
+	{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
+	{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
+	{ 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
+	{ 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
+	{ 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
+	{ 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
+
+	/* 802.11 Japan */
+	{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
+	{ 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
+	{ 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
+	{ 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
+	{ 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
+	{ 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
+	{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+};
+
+/*
+ * RF value list for rt3070
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_3070[] = {
+	{1,  241, 2, 2 },
+	{2,  241, 2, 7 },
+	{3,  242, 2, 2 },
+	{4,  242, 2, 7 },
+	{5,  243, 2, 2 },
+	{6,  243, 2, 7 },
+	{7,  244, 2, 2 },
+	{8,  244, 2, 7 },
+	{9,  245, 2, 2 },
+	{10, 245, 2, 7 },
+	{11, 246, 2, 2 },
+	{12, 246, 2, 7 },
+	{13, 247, 2, 2 },
+	{14, 248, 2, 4 },
+};
+
+static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	struct channel_info *info;
+	char *tx_power1;
+	char *tx_power2;
+	unsigned int i;
+	u16 eeprom;
+
+	/*
+	 * Initialize all hw fields.
+	 */
+	rt2x00dev->hw->flags =
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM |
+	    IEEE80211_HW_SUPPORTS_PS |
+	    IEEE80211_HW_PS_NULLFUNC_STACK;
+	rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
+
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+				rt2x00_eeprom_addr(rt2x00dev,
+						   EEPROM_MAC_ADDR_0));
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Initialize HT information.
+	 */
+	spec->ht.ht_supported = true;
+	spec->ht.cap =
+	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+	    IEEE80211_HT_CAP_GRN_FLD |
+	    IEEE80211_HT_CAP_SGI_20 |
+	    IEEE80211_HT_CAP_SGI_40 |
+	    IEEE80211_HT_CAP_TX_STBC |
+	    IEEE80211_HT_CAP_RX_STBC |
+	    IEEE80211_HT_CAP_PSMP_SUPPORT;
+	spec->ht.ampdu_factor = 3;
+	spec->ht.ampdu_density = 4;
+	spec->ht.mcs.tx_params =
+	    IEEE80211_HT_MCS_TX_DEFINED |
+	    IEEE80211_HT_MCS_TX_RX_DIFF |
+	    ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
+		IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+
+	switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
+	case 3:
+		spec->ht.mcs.rx_mask[2] = 0xff;
+	case 2:
+		spec->ht.mcs.rx_mask[1] = 0xff;
+	case 1:
+		spec->ht.mcs.rx_mask[0] = 0xff;
+		spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
+		break;
+	}
+
+	/*
+	 * Initialize hw_mode information.
+	 */
+	spec->supported_bands = SUPPORT_BAND_2GHZ;
+	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+	if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF2720)) {
+		spec->num_channels = 14;
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
+		   rt2x00_rf(&rt2x00dev->chip, RF2750)) {
+		spec->supported_bands |= SUPPORT_BAND_5GHZ;
+		spec->num_channels = ARRAY_SIZE(rf_vals);
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
+		   rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+		spec->num_channels = ARRAY_SIZE(rf_vals_3070);
+		spec->channels = rf_vals_3070;
+	}
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
+	tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+
+	for (i = 0; i < 14; i++) {
+		info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
+		info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
+	}
+
+	if (spec->num_channels > 14) {
+		tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
+		tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
+
+		for (i = 14; i < spec->num_channels; i++) {
+			info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
+			info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+
+	/*
+	 * Allocate eeprom data.
+	 */
+	retval = rt2800usb_validate_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	retval = rt2800usb_init_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Initialize hw specifications.
+	 */
+	retval = rt2800usb_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * This device requires firmware.
+	 */
+	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+
+	/*
+	 * Set the rssi offset.
+	 */
+	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+	return 0;
+}
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
+				   u32 *iv32, u16 *iv16)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+
+	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+	rt2x00usb_register_multiread(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
+	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+}
+
+static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
+	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	return 0;
+}
+
+static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+	u32 offset;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	/*
+	 * We only need to perform additional register initialization
+	 * for WMM queues/
+	 */
+	if (queue_idx >= 4)
+		return 0;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+	field.bit_offset = (queue_idx & 1) * 16;
+	field.bit_mask = 0xffff << field.bit_offset;
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field, queue->txop);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+	/* Update EDCA registers */
+	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	return 0;
+}
+
+static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u64 tsf;
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
+	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+	return tsf;
+}
+
+static const struct ieee80211_ops rt2800usb_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_key		= rt2x00mac_set_key,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800usb_get_tkip_seq,
+	.set_rts_threshold	= rt2800usb_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800usb_conf_tx,
+	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.get_tsf		= rt2800usb_get_tsf,
+};
+
+static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
+	.probe_hw		= rt2800usb_probe_hw,
+	.get_firmware_name	= rt2800usb_get_firmware_name,
+	.check_firmware		= rt2800usb_check_firmware,
+	.load_firmware		= rt2800usb_load_firmware,
+	.initialize		= rt2x00usb_initialize,
+	.uninitialize		= rt2x00usb_uninitialize,
+	.clear_entry		= rt2x00usb_clear_entry,
+	.set_device_state	= rt2800usb_set_device_state,
+	.rfkill_poll		= rt2800usb_rfkill_poll,
+	.link_stats		= rt2800usb_link_stats,
+	.reset_tuner		= rt2800usb_reset_tuner,
+	.link_tuner		= rt2800usb_link_tuner,
+	.write_tx_desc		= rt2800usb_write_tx_desc,
+	.write_tx_data		= rt2x00usb_write_tx_data,
+	.write_beacon		= rt2800usb_write_beacon,
+	.get_tx_data_len	= rt2800usb_get_tx_data_len,
+	.kick_tx_queue		= rt2800usb_kick_tx_queue,
+	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
+	.fill_rxdone		= rt2800usb_fill_rxdone,
+	.config_shared_key	= rt2800usb_config_shared_key,
+	.config_pairwise_key	= rt2800usb_config_pairwise_key,
+	.config_filter		= rt2800usb_config_filter,
+	.config_intf		= rt2800usb_config_intf,
+	.config_erp		= rt2800usb_config_erp,
+	.config_ant		= rt2800usb_config_ant,
+	.config			= rt2800usb_config,
+};
+
+static const struct data_queue_desc rt2800usb_queue_rx = {
+	.entry_num		= RX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= RXD_DESC_SIZE + RXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_tx = {
+	.entry_num		= TX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_bcn = {
+	.entry_num		= 8 * BEACON_ENTRIES,
+	.data_size		= MGMT_FRAME_SIZE,
+	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct rt2x00_ops rt2800usb_ops = {
+	.name		= KBUILD_MODNAME,
+	.max_sta_intf	= 1,
+	.max_ap_intf	= 8,
+	.eeprom_size	= EEPROM_SIZE,
+	.rf_size	= RF_SIZE,
+	.tx_queues	= NUM_TX_QUEUES,
+	.rx		= &rt2800usb_queue_rx,
+	.tx		= &rt2800usb_queue_tx,
+	.bcn		= &rt2800usb_queue_bcn,
+	.lib		= &rt2800usb_rt2x00_ops,
+	.hw		= &rt2800usb_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+	.debugfs	= &rt2800usb_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * rt2800usb module information.
+ */
+static struct usb_device_id rt2800usb_device_table[] = {
+	/* Abocom */
+	{ USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AirTies */
+	{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Amigo */
+	{ USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Amit */
+	{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* ASUS */
+	{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AzureWave */
+	{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Belkin */
+	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Conceptronic */
+	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Corega */
+	{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* D-Link */
+	{ USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Encore */
+	{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Gemtek */
+	{ USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Gigabyte */
+	{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Hawking */
+	{ USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* I-O DATA */
+	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* LevelOne */
+	{ USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Linksys */
+	{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Logitec */
+	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Motorola */
+	{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ovislink */
+	{ USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Pegatron */
+	{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Planex */
+	{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Qcom */
+	{ USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Quanta */
+	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ralink */
+	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Samsung */
+	{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Siemens */
+	{ USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sitecom */
+	{ USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* SMC */
+	{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sparklan */
+	{ USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sweex */
+	{ USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* U-Media*/
+	{ USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* ZCOM */
+	{ USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zinwell */
+	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zyxel */
+	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
+MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
+MODULE_FIRMWARE(FIRMWARE_RT2870);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver rt2800usb_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rt2800usb_device_table,
+	.probe		= rt2x00usb_probe,
+	.disconnect	= rt2x00usb_disconnect,
+	.suspend	= rt2x00usb_suspend,
+	.resume		= rt2x00usb_resume,
+};
+
+static int __init rt2800usb_init(void)
+{
+	return usb_register(&rt2800usb_driver);
+}
+
+static void __exit rt2800usb_exit(void)
+{
+	usb_deregister(&rt2800usb_driver);
+}
+
+module_init(rt2800usb_init);
+module_exit(rt2800usb_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
new file mode 100644
index 00000000000..61a8be61d3f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -0,0 +1,1945 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800usb
+	Abstract: Data structures and registers for the rt2800usb module.
+	Supported chipsets: RT2800U.
+ */
+
+#ifndef RT2800USB_H
+#define RT2800USB_H
+
+/*
+ * RF chip defines.
+ *
+ * RF2820 2.4G 2T3R
+ * RF2850 2.4G/5G 2T3R
+ * RF2720 2.4G 1T2R
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+ */
+#define RF2820				0x0001
+#define RF2850				0x0002
+#define RF2720				0x0003
+#define RF2750				0x0004
+#define RF3020				0x0005
+#define RF2020				0x0006
+
+/*
+ * RT2870 version
+ */
+#define RT2860C_VERSION			0x28600100
+#define RT2860D_VERSION			0x28600101
+#define RT2880E_VERSION			0x28720200
+#define RT2883_VERSION			0x28830300
+#define RT3070_VERSION			0x30700200
+
+/*
+ * Signal information.
+ * Defaul offset is required for RSSI <-> dBm conversion.
+ */
+#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE			0x1000
+#define CSR_REG_SIZE			0x0800
+#define EEPROM_BASE			0x0000
+#define EEPROM_SIZE			0x0110
+#define BBP_BASE			0x0000
+#define BBP_SIZE			0x0080
+#define RF_BASE				0x0004
+#define RF_SIZE				0x0010
+
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES			4
+
+/*
+ * USB registers.
+ */
+
+/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR			0x0404
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
+ */
+#define INT_SOURCE_CSR			0x0200
+#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
+#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
+#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
+#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ */
+#define INT_MASK_CSR			0x0204
+#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
+#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
+#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
+#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * WPDMA_GLO_CFG
+ */
+#define WPDMA_GLO_CFG 			0x0208
+#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
+#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
+#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
+#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
+#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
+#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
+#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
+
+/*
+ * WPDMA_RST_IDX
+ */
+#define WPDMA_RST_IDX 			0x020c
+#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
+#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
+#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
+#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
+#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
+#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
+#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
+
+/*
+ * DELAY_INT_CFG
+ */
+#define DELAY_INT_CFG			0x0210
+#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
+#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
+#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
+#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
+#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
+#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
+
+/*
+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+ * AIFSN0: AC_BE
+ * AIFSN1: AC_BK
+ * AIFSN1: AC_VI
+ * AIFSN1: AC_VO
+ */
+#define WMM_AIFSN_CFG			0x0214
+#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
+#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
+#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
+#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
+ * CWMIN0: AC_BE
+ * CWMIN1: AC_BK
+ * CWMIN1: AC_VI
+ * CWMIN1: AC_VO
+ */
+#define WMM_CWMIN_CFG			0x0218
+#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
+#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
+#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
+#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
+ * CWMAX0: AC_BE
+ * CWMAX1: AC_BK
+ * CWMAX1: AC_VI
+ * CWMAX1: AC_VO
+ */
+#define WMM_CWMAX_CFG			0x021c
+#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
+#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
+#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
+#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
+
+/*
+ * AC_TXOP0: AC_BK/AC_BE TXOP register
+ * AC0TXOP: AC_BK in unit of 32us
+ * AC1TXOP: AC_BE in unit of 32us
+ */
+#define WMM_TXOP0_CFG			0x0220
+#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP1: AC_VO/AC_VI TXOP register
+ * AC2TXOP: AC_VI in unit of 32us
+ * AC3TXOP: AC_VO in unit of 32us
+ */
+#define WMM_TXOP1_CFG			0x0224
+#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
+
+/*
+ * GPIO_CTRL_CFG:
+ */
+#define GPIO_CTRL_CFG			0x0228
+#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
+#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
+#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
+#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
+#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
+#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
+#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
+#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
+#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
+
+/*
+ * MCU_CMD_CFG
+ */
+#define MCU_CMD_CFG			0x022c
+
+/*
+ * AC_BK register offsets
+ */
+#define TX_BASE_PTR0			0x0230
+#define TX_MAX_CNT0			0x0234
+#define TX_CTX_IDX0			0x0238
+#define TX_DTX_IDX0			0x023c
+
+/*
+ * AC_BE register offsets
+ */
+#define TX_BASE_PTR1			0x0240
+#define TX_MAX_CNT1			0x0244
+#define TX_CTX_IDX1			0x0248
+#define TX_DTX_IDX1			0x024c
+
+/*
+ * AC_VI register offsets
+ */
+#define TX_BASE_PTR2			0x0250
+#define TX_MAX_CNT2			0x0254
+#define TX_CTX_IDX2			0x0258
+#define TX_DTX_IDX2			0x025c
+
+/*
+ * AC_VO register offsets
+ */
+#define TX_BASE_PTR3			0x0260
+#define TX_MAX_CNT3			0x0264
+#define TX_CTX_IDX3			0x0268
+#define TX_DTX_IDX3			0x026c
+
+/*
+ * HCCA register offsets
+ */
+#define TX_BASE_PTR4			0x0270
+#define TX_MAX_CNT4			0x0274
+#define TX_CTX_IDX4			0x0278
+#define TX_DTX_IDX4			0x027c
+
+/*
+ * MGMT register offsets
+ */
+#define TX_BASE_PTR5			0x0280
+#define TX_MAX_CNT5			0x0284
+#define TX_CTX_IDX5			0x0288
+#define TX_DTX_IDX5			0x028c
+
+/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR			0x0290
+#define RX_MAX_CNT			0x0294
+#define RX_CRX_IDX			0x0298
+#define RX_DRX_IDX			0x029c
+
+/*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG			0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT	FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT	FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR		FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR		FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT		FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN	FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN		FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN		FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID	FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY		FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY		FIELD32(0x80000000)
+
+/*
+ * USB_CYC_CFG
+ */
+#define USB_CYC_CFG			0x02a4
+#define USB_CYC_CFG_CLOCK_CYCLE		FIELD32(0x000000ff)
+
+/*
+ * PBF_SYS_CTRL
+ * HOST_RAM_WRITE: enable Host program ram write selection
+ */
+#define PBF_SYS_CTRL			0x0400
+#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
+#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define PBF_CFG				0x0408
+#define PBF_MAX_PCNT			0x040c
+#define PBF_CTRL			0x0410
+#define PBF_INT_STA			0x0414
+#define PBF_INT_ENA			0x0418
+
+/*
+ * BCN_OFFSET0:
+ */
+#define BCN_OFFSET0			0x042c
+#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
+#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
+#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
+#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
+
+/*
+ * BCN_OFFSET1:
+ */
+#define BCN_OFFSET1			0x0430
+#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
+#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
+#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
+#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define TXRXQ_PCNT			0x0438
+#define PBF_DBG				0x043c
+
+/*
+ * RF registers
+ */
+#define	RF_CSR_CFG			0x0500
+#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ * ASIC_REV: 0
+ * ASIC_VER: 2870
+ */
+#define MAC_CSR0			0x1000
+#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
+#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
+
+/*
+ * MAC_SYS_CTRL:
+ */
+#define MAC_SYS_CTRL			0x1004
+#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
+#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
+#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
+#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
+#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
+#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
+#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
+#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
+
+/*
+ * MAC_ADDR_DW0: STA MAC register 0
+ */
+#define MAC_ADDR_DW0			0x1008
+#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_ADDR_DW1: STA MAC register 1
+ * UNICAST_TO_ME_MASK:
+ * Used to mask off bits from byte 5 of the MAC address
+ * to determine the UNICAST_TO_ME bit for RX frames.
+ * The full mask is complemented by BSS_ID_MASK:
+ *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
+ */
+#define MAC_ADDR_DW1			0x100c
+#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
+
+/*
+ * MAC_BSSID_DW0: BSSID register 0
+ */
+#define MAC_BSSID_DW0			0x1010
+#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_BSSID_DW1: BSSID register 1
+ * BSS_ID_MASK:
+ *     0: 1-BSSID mode (BSS index = 0)
+ *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
+ *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
+ *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
+ * BSSID. This will make sure that those bits will be ignored
+ * when determining the MY_BSS of RX frames.
+ */
+#define MAC_BSSID_DW1			0x1014
+#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
+#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
+
+/*
+ * MAX_LEN_CFG: Maximum frame length register.
+ * MAX_MPDU: rt2860b max 16k bytes
+ * MAX_PSDU: Maximum PSDU length
+ *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
+ */
+#define MAX_LEN_CFG			0x1018
+#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
+#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
+#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
+#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
+
+/*
+ * BBP_CSR_CFG: BBP serial control register
+ * VALUE: Register value to program into BBP
+ * REG_NUM: Selected BBP register
+ * READ_CONTROL: 0 write BBP, 1 read BBP
+ * BUSY: ASIC is busy executing BBP commands
+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
+ * BBP_RW_MODE: 0 serial, 1 paralell
+ */
+#define BBP_CSR_CFG			0x101c
+#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
+#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
+#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
+#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
+#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
+#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
+
+/*
+ * RF_CSR_CFG0: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * BITWIDTH: Selected RF register
+ * STANDBYMODE: 0 high when standby, 1 low when standby
+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
+ * BUSY: ASIC is busy executing RF commands
+ */
+#define RF_CSR_CFG0			0x1020
+#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
+#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
+#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
+#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
+#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
+
+/*
+ * RF_CSR_CFG1: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG1			0x1024
+#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
+
+/*
+ * RF_CSR_CFG2: RF control register
+ * VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG2			0x1028
+#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
+
+/*
+ * LED_CFG: LED control
+ * color LED's:
+ *   0: off
+ *   1: blinking upon TX2
+ *   2: periodic slow blinking
+ *   3: always on
+ * LED polarity:
+ *   0: active low
+ *   1: active high
+ */
+#define LED_CFG				0x102c
+#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
+#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
+#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
+#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
+#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
+#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
+#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
+
+/*
+ * XIFS_TIME_CFG: MAC timing
+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
+ *	when MAC doesn't reference BBP signal BBRXEND
+ * EIFS: unit 1us
+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
+ *
+ */
+#define XIFS_TIME_CFG			0x1100
+#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
+#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
+#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
+#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
+#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
+
+/*
+ * BKOFF_SLOT_CFG:
+ */
+#define BKOFF_SLOT_CFG			0x1104
+#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
+#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
+
+/*
+ * NAV_TIME_CFG:
+ */
+#define NAV_TIME_CFG			0x1108
+#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
+#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
+#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
+#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
+
+/*
+ * CH_TIME_CFG: count as channel busy
+ */
+#define CH_TIME_CFG     	        0x110c
+
+/*
+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
+ */
+#define PBF_LIFE_TIMER     	        0x1110
+
+/*
+ * BCN_TIME_CFG:
+ * BEACON_INTERVAL: in unit of 1/16 TU
+ * TSF_TICKING: Enable TSF auto counting
+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ * BEACON_GEN: Enable beacon generator
+ */
+#define BCN_TIME_CFG			0x1114
+#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
+#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
+#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
+#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
+#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
+#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
+
+/*
+ * TBTT_SYNC_CFG:
+ */
+#define TBTT_SYNC_CFG			0x1118
+
+/*
+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
+ */
+#define TSF_TIMER_DW0			0x111c
+#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
+
+/*
+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
+ */
+#define TSF_TIMER_DW1			0x1120
+#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
+
+/*
+ * TBTT_TIMER: TImer remains till next TBTT, read-only
+ */
+#define TBTT_TIMER			0x1124
+
+/*
+ * INT_TIMER_CFG:
+ */
+#define INT_TIMER_CFG			0x1128
+
+/*
+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
+ */
+#define INT_TIMER_EN			0x112c
+
+/*
+ * CH_IDLE_STA: channel idle time
+ */
+#define CH_IDLE_STA			0x1130
+
+/*
+ * CH_BUSY_STA: channel busy time
+ */
+#define CH_BUSY_STA			0x1134
+
+/*
+ * MAC_STATUS_CFG:
+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
+ *	if 1 or higher one of the 2 registers is busy.
+ */
+#define MAC_STATUS_CFG			0x1200
+#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
+
+/*
+ * PWR_PIN_CFG:
+ */
+#define PWR_PIN_CFG			0x1204
+
+/*
+ * AUTOWAKEUP_CFG: Manual power control / status register
+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
+ * AUTOWAKE: 0:sleep, 1:awake
+ */
+#define AUTOWAKEUP_CFG			0x1208
+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
+#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
+
+/*
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG			0x1300
+#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG			0x1304
+#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG			0x1308
+#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG			0x130c
+#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_TID_AC_MAP:
+ */
+#define EDCA_TID_AC_MAP			0x1310
+
+/*
+ * TX_PWR_CFG_0:
+ */
+#define TX_PWR_CFG_0			0x1314
+#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_1:
+ */
+#define TX_PWR_CFG_1			0x1318
+#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_2:
+ */
+#define TX_PWR_CFG_2			0x131c
+#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_3:
+ */
+#define TX_PWR_CFG_3			0x1320
+#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_4:
+ */
+#define TX_PWR_CFG_4			0x1324
+#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
+#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
+#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
+
+/*
+ * TX_PIN_CFG:
+ */
+#define TX_PIN_CFG			0x1328
+#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
+#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
+#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
+#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
+#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
+#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
+#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
+#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
+#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
+#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
+#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
+#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
+#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
+#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
+#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
+#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
+#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
+#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
+#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
+#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
+
+/*
+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
+ */
+#define TX_BAND_CFG			0x132c
+#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
+#define TX_BAND_CFG_A			FIELD32(0x00000002)
+#define TX_BAND_CFG_BG			FIELD32(0x00000004)
+
+/*
+ * TX_SW_CFG0:
+ */
+#define TX_SW_CFG0			0x1330
+
+/*
+ * TX_SW_CFG1:
+ */
+#define TX_SW_CFG1			0x1334
+
+/*
+ * TX_SW_CFG2:
+ */
+#define TX_SW_CFG2			0x1338
+
+/*
+ * TXOP_THRES_CFG:
+ */
+#define TXOP_THRES_CFG			0x133c
+
+/*
+ * TXOP_CTRL_CFG:
+ */
+#define TXOP_CTRL_CFG			0x1340
+
+/*
+ * TX_RTS_CFG:
+ * RTS_THRES: unit:byte
+ * RTS_FBK_EN: enable rts rate fallback
+ */
+#define TX_RTS_CFG			0x1344
+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
+#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
+
+/*
+ * TX_TIMEOUT_CFG:
+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
+ *                it is recommended that:
+ *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
+ */
+#define TX_TIMEOUT_CFG			0x1348
+#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
+
+/*
+ * TX_RTY_CFG:
+ * SHORT_RTY_LIMIT: short retry limit
+ * LONG_RTY_LIMIT: long retry limit
+ * LONG_RTY_THRE: Long retry threshoold
+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
+ *                   0:expired by retry limit, 1: expired by mpdu life timer
+ * AGG_RTY_MODE: Aggregate MPDU retry mode
+ *               0:expired by retry limit, 1: expired by mpdu life timer
+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
+ */
+#define TX_RTY_CFG			0x134c
+#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
+#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
+#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
+#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
+
+/*
+ * TX_LINK_CFG:
+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
+ * MFB_ENABLE: TX apply remote MFB 1:enable
+ * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
+ *                     0: not apply remote remote unsolicit (MFS=7)
+ * TX_MRQ_EN: MCS request TX enable
+ * TX_RDG_EN: RDG TX enable
+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
+ * REMOTE_MFB: remote MCS feedback
+ * REMOTE_MFS: remote MCS feedback sequence number
+ */
+#define TX_LINK_CFG			0x1350
+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
+#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
+#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
+#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
+#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
+#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
+#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
+
+/*
+ * HT_FBK_CFG0:
+ */
+#define HT_FBK_CFG0			0x1354
+#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * HT_FBK_CFG1:
+ */
+#define HT_FBK_CFG1			0x1358
+#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG0:
+ */
+#define LG_FBK_CFG0			0x135c
+#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
+#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
+#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
+#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
+#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG1:
+ */
+#define LG_FBK_CFG1			0x1360
+#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
+
+/*
+ * CCK_PROT_CFG: CCK Protection
+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
+ * PROTECT_CTRL: Protection control frame type for CCK TX
+ *               0:none, 1:RTS/CTS, 2:CTS-to-self
+ * PROTECT_NAV: TXOP protection type for CCK TX
+ *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
+ * RTS_TH_EN: RTS threshold enable on CCK TX
+ */
+#define CCK_PROT_CFG			0x1364
+#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * OFDM_PROT_CFG: OFDM Protection
+ */
+#define OFDM_PROT_CFG			0x1368
+#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM20_PROT_CFG: MM20 Protection
+ */
+#define MM20_PROT_CFG			0x136c
+#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM40_PROT_CFG: MM40 Protection
+ */
+#define MM40_PROT_CFG			0x1370
+#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF20_PROT_CFG: GF20 Protection
+ */
+#define GF20_PROT_CFG			0x1374
+#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF40_PROT_CFG: GF40 Protection
+ */
+#define GF40_PROT_CFG			0x1378
+#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * EXP_CTS_TIME:
+ */
+#define EXP_CTS_TIME			0x137c
+
+/*
+ * EXP_ACK_TIME:
+ */
+#define EXP_ACK_TIME			0x1380
+
+/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+#define RX_FILTER_CFG			0x1400
+#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
+#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
+#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
+#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
+#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
+#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
+#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
+#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
+#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
+#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
+#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
+#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
+#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
+#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
+#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
+#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
+
+/*
+ * AUTO_RSP_CFG:
+ * AUTORESPONDER: 0: disable, 1: enable
+ * BAC_ACK_POLICY: 0:long, 1:short preamble
+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
+ * DUAL_CTS_EN: Power bit value in control frame
+ * ACK_CTS_PSM_BIT:Power bit value in control frame
+ */
+#define AUTO_RSP_CFG			0x1404
+#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
+#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
+#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
+#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
+#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
+#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
+
+/*
+ * LEGACY_BASIC_RATE:
+ */
+#define LEGACY_BASIC_RATE		0x1408
+
+/*
+ * HT_BASIC_RATE:
+ */
+#define HT_BASIC_RATE			0x140c
+
+/*
+ * HT_CTRL_CFG:
+ */
+#define HT_CTRL_CFG			0x1410
+
+/*
+ * SIFS_COST_CFG:
+ */
+#define SIFS_COST_CFG			0x1414
+
+/*
+ * RX_PARSER_CFG:
+ * Set NAV for all received frames
+ */
+#define RX_PARSER_CFG			0x1418
+
+/*
+ * TX_SEC_CNT0:
+ */
+#define TX_SEC_CNT0			0x1500
+
+/*
+ * RX_SEC_CNT0:
+ */
+#define RX_SEC_CNT0			0x1504
+
+/*
+ * CCMP_FC_MUTE:
+ */
+#define CCMP_FC_MUTE			0x1508
+
+/*
+ * TXOP_HLDR_ADDR0:
+ */
+#define TXOP_HLDR_ADDR0			0x1600
+
+/*
+ * TXOP_HLDR_ADDR1:
+ */
+#define TXOP_HLDR_ADDR1			0x1604
+
+/*
+ * TXOP_HLDR_ET:
+ */
+#define TXOP_HLDR_ET			0x1608
+
+/*
+ * QOS_CFPOLL_RA_DW0:
+ */
+#define QOS_CFPOLL_RA_DW0		0x160c
+
+/*
+ * QOS_CFPOLL_RA_DW1:
+ */
+#define QOS_CFPOLL_RA_DW1		0x1610
+
+/*
+ * QOS_CFPOLL_QC:
+ */
+#define QOS_CFPOLL_QC			0x1614
+
+/*
+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
+ */
+#define RX_STA_CNT0			0x1700
+#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
+#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
+ */
+#define RX_STA_CNT1			0x1704
+#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
+#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT2:
+ */
+#define RX_STA_CNT2			0x1708
+#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
+#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT0: TX Beacon count
+ */
+#define TX_STA_CNT0			0x170c
+#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT1: TX tx count
+ */
+#define TX_STA_CNT1			0x1710
+#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
+#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT2: TX tx count
+ */
+#define TX_STA_CNT2			0x1714
+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_FIFO: TX Result for specific PID status fifo register
+ */
+#define TX_STA_FIFO			0x1718
+#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
+#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
+#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
+#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
+#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
+#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
+#define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT: Debug counter
+ */
+#define TX_AGG_CNT			0x171c
+#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT0:
+ */
+#define TX_AGG_CNT0			0x1720
+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT1:
+ */
+#define TX_AGG_CNT1			0x1724
+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT2:
+ */
+#define TX_AGG_CNT2			0x1728
+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT3:
+ */
+#define TX_AGG_CNT3			0x172c
+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT4:
+ */
+#define TX_AGG_CNT4			0x1730
+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT5:
+ */
+#define TX_AGG_CNT5			0x1734
+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT6:
+ */
+#define TX_AGG_CNT6			0x1738
+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT7:
+ */
+#define TX_AGG_CNT7			0x173c
+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
+
+/*
+ * MPDU_DENSITY_CNT:
+ * TX_ZERO_DEL: TX zero length delimiter count
+ * RX_ZERO_DEL: RX zero length delimiter count
+ */
+#define MPDU_DENSITY_CNT		0x1740
+#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
+#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
+
+/*
+ * Security key table memory.
+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
+ */
+#define MAC_WCID_BASE			0x1800
+#define PAIRWISE_KEY_TABLE_BASE		0x4000
+#define MAC_IVEIV_TABLE_BASE		0x6000
+#define MAC_WCID_ATTRIBUTE_BASE		0x6800
+#define SHARED_KEY_TABLE_BASE		0x6c00
+#define SHARED_KEY_MODE_BASE		0x7000
+
+#define MAC_WCID_ENTRY(__idx) \
+	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define MAC_IVEIV_ENTRY(__idx) \
+	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+#define MAC_WCID_ATTR_ENTRY(__idx) \
+	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define SHARED_KEY_MODE_ENTRY(__idx) \
+	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+
+struct mac_wcid_entry {
+	u8 mac[6];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct hw_key_entry {
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct mac_iveiv_entry {
+	u8 iv[8];
+} __attribute__ ((packed));
+
+/*
+ * MAC_WCID_ATTRIBUTE:
+ */
+#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
+#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
+#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+
+/*
+ * SHARED_KEY_MODE:
+ */
+#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
+#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
+#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
+#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
+#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
+#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
+#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
+#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
+
+/*
+ * HOST-MCU communication
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR			0x7010
+#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID			0x7014
+#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
+ */
+#define H2M_MAILBOX_STATUS		0x701c
+
+/*
+ * H2M_INT_SRC:
+ */
+#define H2M_INT_SRC			0x7024
+
+/*
+ * H2M_BBP_AGENT:
+ */
+#define H2M_BBP_AGENT			0x7028
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
+#define MCU_LEDCS_POLARITY		FIELD8(0x01)
+
+/*
+ * HW_CS_CTS_BASE:
+ * Carrier-sense CTS frame base address.
+ * It's where mac stores carrier-sense frame for carrier-sense function.
+ */
+#define HW_CS_CTS_BASE			0x7700
+
+/*
+ * HW_DFS_CTS_BASE:
+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
+ */
+#define HW_DFS_CTS_BASE			0x7780
+
+/*
+ * TXRX control registers - base address 0x3000
+ */
+
+/*
+ * TXRX_CSR1:
+ * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+ */
+#define TXRX_CSR1			0x77d0
+
+/*
+ * HW_DEBUG_SETTING_BASE:
+ * since NULL frame won't be that long (256 byte)
+ * We steal 16 tail bytes to save debugging settings
+ */
+#define HW_DEBUG_SETTING_BASE		0x77f0
+#define HW_DEBUG_SETTING_BASE2		0x7770
+
+/*
+ * HW_BEACON_BASE
+ * In order to support maximum 8 MBSS and its maximum length
+ * is 512 bytes for each beacon
+ * Three section discontinue memory segments will be used.
+ * 1. The original region for BCN 0~3
+ * 2. Extract memory from FCE table for BCN 4~5
+ * 3. Extract memory from Pair-wise key table for BCN 6~7
+ *    It occupied those memory of wcid 238~253 for BCN 6
+ *    and wcid 222~237 for BCN 7
+ *
+ * IMPORTANT NOTE: Not sure why legacy driver does this,
+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
+ */
+#define HW_BEACON_BASE0			0x7800
+#define HW_BEACON_BASE1			0x7a00
+#define HW_BEACON_BASE2			0x7c00
+#define HW_BEACON_BASE3			0x7e00
+#define HW_BEACON_BASE4			0x7200
+#define HW_BEACON_BASE5			0x7400
+#define HW_BEACON_BASE6			0x5dc0
+#define HW_BEACON_BASE7			0x5bc0
+
+#define HW_BEACON_OFFSET(__index) \
+	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
+	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
+	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+
+/*
+ * 8051 firmware image.
+ */
+#define FIRMWARE_RT2870			"rt2870.bin"
+#define FIRMWARE_IMAGE_BASE		0x3000
+
+/*
+ * BBP registers.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP 1: TX Antenna
+ */
+#define BBP1_TX_POWER			FIELD8(0x07)
+#define BBP1_TX_ANTENNA			FIELD8(0x18)
+
+/*
+ * BBP 3: RX Antenna
+ */
+#define BBP3_RX_ANTENNA			FIELD8(0x18)
+#define BBP3_HT40_PLUS			FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF			FIELD8(0x01)
+#define BBP4_BANDWIDTH			FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R			FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING		FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER		FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
+
+/*
+ * RF registers
+ */
+
+/*
+ * RF 2
+ */
+#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
+#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
+#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
+
+/*
+ * RF 3
+ */
+#define RF3_TXPOWER_G			FIELD32(0x00003e00)
+#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
+#define RF3_TXPOWER_A			FIELD32(0x00003c00)
+
+/*
+ * RF 4
+ */
+#define RF4_TXPOWER_G			FIELD32(0x000007c0)
+#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
+#define RF4_TXPOWER_A			FIELD32(0x00000780)
+#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
+#define RF4_HT40			FIELD32(0x00200000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * EEPROM Version
+ */
+#define EEPROM_VERSION			0x0001
+#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
+#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0		0x0002
+#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_1		0x0003
+#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2		0x0004
+#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
+
+/*
+ * EEPROM ANTENNA config
+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
+ * TXPATH: 1: 1T, 2: 2T
+ */
+#define	EEPROM_ANTENNA			0x001a
+#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
+#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
+#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC config
+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ */
+#define	EEPROM_NIC			0x001b
+#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
+#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
+#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
+#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
+#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
+#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
+#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
+#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
+#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
+#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
+
+/*
+ * EEPROM frequency
+ */
+#define	EEPROM_FREQ			0x001d
+#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
+#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
+#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
+
+/*
+ * EEPROM LED
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED1			0x001e
+#define EEPROM_LED2			0x001f
+#define EEPROM_LED3			0x0020
+#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
+
+/*
+ * EEPROM LNA
+ */
+#define EEPROM_LNA			0x0022
+#define EEPROM_LNA_BG			FIELD16(0x00ff)
+#define EEPROM_LNA_A0			FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG offset
+ */
+#define EEPROM_RSSI_BG			0x0023
+#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG2 offset
+ */
+#define EEPROM_RSSI_BG2			0x0024
+#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A offset
+ */
+#define EEPROM_RSSI_A			0x0025
+#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A2 offset
+ */
+#define EEPROM_RSSI_A2			0x0026
+#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
+ *	This is delta in 40MHZ.
+ * VALUE: Tx Power dalta value (MAX=4)
+ * TYPE: 1: Plus the delta value, 0: minus the delta value
+ * TXPOWER: Enable:
+ */
+#define EEPROM_TXPOWER_DELTA		0x0028
+#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
+
+/*
+ * EEPROM TXPOWER 802.11BG
+ */
+#define	EEPROM_TXPOWER_BG1		0x0029
+#define	EEPROM_TXPOWER_BG2		0x0030
+#define EEPROM_TXPOWER_BG_SIZE		7
+#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A1		0x003c
+#define EEPROM_TXPOWER_A2		0x0053
+#define EEPROM_TXPOWER_A_SIZE		6
+#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower byrate: 20MHZ power
+ */
+#define EEPROM_TXPOWER_BYRATE		0x006f
+
+/*
+ * EEPROM BBP.
+ */
+#define	EEPROM_BBP_START		0x0078
+#define EEPROM_BBP_SIZE			16
+#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP			0x30
+#define MCU_WAKEUP			0x31
+#define MCU_RADIO_OFF			0x35
+#define MCU_CURRENT			0x36
+#define MCU_LED				0x50
+#define MCU_LED_STRENGTH		0x51
+#define MCU_LED_1			0x52
+#define MCU_LED_2			0x53
+#define MCU_LED_3			0x54
+#define MCU_RADAR			0x60
+#define MCU_BOOT_SIGNAL			0x72
+#define MCU_BBP_SIGNAL			0x80
+#define MCU_POWER_SAVE			0x83
+
+/*
+ * MCU mailbox tokens
+ */
+#define TOKEN_WAKUP			3
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
+#define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
+#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+
+/*
+ * TX descriptor format for TX, PRIO and Beacon Ring.
+ */
+
+/*
+ * Word0
+ */
+#define TXD_W0_SD_PTR0			FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define TXD_W1_SD_LEN1			FIELD32(0x00003fff)
+#define TXD_W1_LAST_SEC1		FIELD32(0x00004000)
+#define TXD_W1_BURST			FIELD32(0x00008000)
+#define TXD_W1_SD_LEN0			FIELD32(0x3fff0000)
+#define TXD_W1_LAST_SEC0		FIELD32(0x40000000)
+#define TXD_W1_DMA_DONE			FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define TXD_W2_SD_PTR1			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ *       0:MGMT, 1:HCCA 2:EDCA
+ */
+#define TXD_W3_WIV			FIELD32(0x01000000)
+#define TXD_W3_QSEL			FIELD32(0x06000000)
+#define TXD_W3_TCO			FIELD32(0x20000000)
+#define TXD_W3_UCO			FIELD32(0x40000000)
+#define TXD_W3_ICO			FIELD32(0x80000000)
+
+/*
+ * TX Info structure
+ */
+
+/*
+ * Word0
+ * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ *       0:MGMT, 1:HCCA 2:EDCA
+ * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid
+ * DMA_TX_BURST: used ONLY in USB bulk Aggregation.
+ *               Force USB DMA transmit frame from current selected endpoint
+ */
+#define TXINFO_W0_USB_DMA_TX_PKT_LEN	FIELD32(0x0000ffff)
+#define TXINFO_W0_WIV			FIELD32(0x01000000)
+#define TXINFO_W0_QSEL			FIELD32(0x06000000)
+#define TXINFO_W0_SW_USE_LAST_ROUND	FIELD32(0x08000000)
+#define TXINFO_W0_USB_DMA_NEXT_VALID	FIELD32(0x40000000)
+#define TXINFO_W0_USB_DMA_TX_BURST	FIELD32(0x80000000)
+
+/*
+ * TX WI structure
+ */
+
+/*
+ * Word0
+ * FRAG: 1 To inform TKIP engine this is a fragment.
+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
+ * BW: Channel bandwidth 20MHz or 40 MHz
+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ */
+#define TXWI_W0_FRAG			FIELD32(0x00000001)
+#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
+#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
+#define TXWI_W0_TS			FIELD32(0x00000008)
+#define TXWI_W0_AMPDU			FIELD32(0x00000010)
+#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
+#define TXWI_W0_TX_OP			FIELD32(0x00000300)
+#define TXWI_W0_MCS			FIELD32(0x007f0000)
+#define TXWI_W0_BW			FIELD32(0x00800000)
+#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
+#define TXWI_W0_STBC			FIELD32(0x06000000)
+#define TXWI_W0_IFS			FIELD32(0x08000000)
+#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word1
+ */
+#define TXWI_W1_ACK			FIELD32(0x00000001)
+#define TXWI_W1_NSEQ			FIELD32(0x00000002)
+#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
+#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
+
+/*
+ * Word2
+ */
+#define TXWI_W2_IV			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ */
+#define TXWI_W3_EIV			FIELD32(0xffffffff)
+
+/*
+ * RX descriptor format for RX Ring.
+ */
+
+/*
+ * Word0
+ * UNICAST_TO_ME: This RX frame is unicast to me.
+ * MULTICAST: This is a multicast frame.
+ * BROADCAST: This is a broadcast frame.
+ * MY_BSS: this frame belongs to the same BSSID.
+ * CRC_ERROR: CRC error.
+ * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid.
+ * AMSDU: rx with 802.3 header, not 802.11 header.
+ */
+
+#define RXD_W0_BA			FIELD32(0x00000001)
+#define RXD_W0_DATA			FIELD32(0x00000002)
+#define RXD_W0_NULLDATA			FIELD32(0x00000004)
+#define RXD_W0_FRAG			FIELD32(0x00000008)
+#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXD_W0_MULTICAST		FIELD32(0x00000020)
+#define RXD_W0_BROADCAST		FIELD32(0x00000040)
+#define RXD_W0_MY_BSS			FIELD32(0x00000080)
+#define RXD_W0_CRC_ERROR		FIELD32(0x00000100)
+#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXD_W0_AMSDU			FIELD32(0x00000800)
+#define RXD_W0_HTC			FIELD32(0x00001000)
+#define RXD_W0_RSSI			FIELD32(0x00002000)
+#define RXD_W0_L2PAD			FIELD32(0x00004000)
+#define RXD_W0_AMPDU			FIELD32(0x00008000)
+#define RXD_W0_DECRYPTED		FIELD32(0x00010000)
+#define RXD_W0_PLCP_RSSI		FIELD32(0x00020000)
+#define RXD_W0_CIPHER_ALG		FIELD32(0x00040000)
+#define RXD_W0_LAST_AMSDU		FIELD32(0x00080000)
+#define RXD_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
+/*
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
+ */
+#define MIN_G_TXPOWER	0
+#define MIN_A_TXPOWER	-7
+#define MAX_G_TXPOWER	31
+#define MAX_A_TXPOWER	15
+#define DEFAULT_TXPOWER	5
+
+#define TXPOWER_G_FROM_DEV(__txpower) \
+	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_G_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
+
+#define TXPOWER_A_FROM_DEV(__txpower) \
+	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_A_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 84bd6f19acb..a498dde024e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -103,6 +103,15 @@
 #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
 
 /*
+ * Determine the alignment requirement,
+ * to make sure the 802.11 payload is padded to a 4-byte boundrary
+ * we must determine the address of the payload and calculate the
+ * amount of bytes needed to move the data.
+ */
+#define ALIGN_SIZE(__skb, __header) \
+	(  ((unsigned long)((__skb)->data + (__header))) & 3 )
+
+/*
  * Standard timing and size defines.
  * These values should follow the ieee80211 specifications.
  */
@@ -138,6 +147,7 @@ struct rt2x00_chip {
 #define RT2561		0x0302
 #define RT2661		0x0401
 #define RT2571		0x1300
+#define RT2870		0x1600
 
 	u16 rf;
 	u32 rev;
@@ -357,6 +367,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
  *	for @tx_power_a, @tx_power_bg and @channels.
  * @channels: Device/chipset specific channel values (See &struct rf_channel).
  * @channels_info: Additional information for channels (See &struct channel_info).
+ * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
  */
 struct hw_mode_spec {
 	unsigned int supported_bands;
@@ -370,6 +381,8 @@ struct hw_mode_spec {
 	unsigned int num_channels;
 	const struct rf_channel *channels;
 	const struct channel_info *channels_info;
+
+	struct ieee80211_sta_ht_cap ht;
 };
 
 /*
@@ -404,6 +417,8 @@ struct rt2x00lib_erp {
 	short pifs;
 	short difs;
 	short eifs;
+
+	u16 beacon_int;
 };
 
 /*
@@ -590,6 +605,7 @@ enum rt2x00_flags {
 	DRIVER_REQUIRE_SCHEDULED,
 	DRIVER_REQUIRE_DMA,
 	DRIVER_REQUIRE_COPY_IV,
+	DRIVER_REQUIRE_L2PAD,
 
 	/*
 	 * Driver features
@@ -606,6 +622,7 @@ enum rt2x00_flags {
 	CONFIG_EXTERNAL_LNA_BG,
 	CONFIG_DOUBLE_ANTENNA,
 	CONFIG_DISABLE_LINK_TUNING,
+	CONFIG_CHANNEL_HT40,
 };
 
 /*
@@ -672,6 +689,12 @@ struct rt2x00_dev {
 	unsigned long flags;
 
 	/*
+	 * Device information, Bus IRQ and name (PCI, SoC)
+	 */
+	int irq;
+	const char *name;
+
+	/*
 	 * Chipset identification.
 	 */
 	struct rt2x00_chip chip;
@@ -772,6 +795,18 @@ struct rt2x00_dev {
 	u8 freq_offset;
 
 	/*
+	 * Calibration information (for rt2800usb & rt2800pci).
+	 * [0] -> BW20
+	 * [1] -> BW40
+	 */
+	u8 calibration[2];
+
+	/*
+	 * Beacon interval.
+	 */
+	u16 beacon_int;
+
+	/*
 	 * Low level statistics which will have
 	 * to be kept up to date while device is running.
 	 */
@@ -860,6 +895,18 @@ static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
 	rt2x00dev->chip.rev = rev;
 }
 
+static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
+				      const u16 rt)
+{
+	rt2x00dev->chip.rt = rt;
+}
+
+static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
+				      const u16 rf, const u32 rev)
+{
+	rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
+}
+
 static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
 {
 	return (chipset->rt == chip);
@@ -875,11 +922,10 @@ static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
 	return chipset->rev;
 }
 
-static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
-				   const u32 rev)
+static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset,
+				    const u32 mask, const u32 rev)
 {
-	return (((chipset->rev & 0xffff0) == rev) &&
-		!!(chipset->rev & 0x0000f));
+	return ((chipset->rev & mask) == rev);
 }
 
 /**
@@ -925,9 +971,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 				struct ieee80211_if_init_conf *conf);
 int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
-int rt2x00mac_config_interface(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       struct ieee80211_if_conf *conf);
 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
 				unsigned int *total_flags,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 9c2f5517af2..3e019a12df2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -106,6 +106,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 	}
 
 	erp.basic_rates = bss_conf->basic_rates;
+	erp.beacon_int = bss_conf->beacon_int;
+
+	/* Update global beacon interval time, this is needed for PS support */
+	rt2x00dev->beacon_int = bss_conf->beacon_int;
 
 	rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp);
 }
@@ -173,6 +177,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 	libconf.conf = conf;
 
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
+		if (conf_is_ht40(conf))
+			__set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+		else
+			__clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+
 		memcpy(&libconf.rf,
 		       &rt2x00dev->spec.channels[conf->channel->hw_value],
 		       sizeof(libconf.rf));
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 0b41845d954..bc4e81e2184 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -33,7 +33,7 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
 {
 	switch (key->alg) {
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			return CIPHER_WEP64;
 		else
 			return CIPHER_WEP128;
@@ -65,7 +65,8 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
 		__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
 
 	txdesc->key_idx = hw_key->hw_key_idx;
-	txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+	txdesc->iv_offset = txdesc->header_length;
+	txdesc->iv_len = hw_key->iv_len;
 
 	if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
 		__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
@@ -103,47 +104,44 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
 	return overhead;
 }
 
-void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len)
+void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 
-	if (unlikely(!iv_len))
+	if (unlikely(!txdesc->iv_len))
 		return;
 
 	/* Copy IV/EIV data */
-	memcpy(skbdesc->iv, skb->data + header_length, iv_len);
+	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
 }
 
-void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 
-	if (unlikely(!iv_len))
+	if (unlikely(!txdesc->iv_len))
 		return;
 
 	/* Copy IV/EIV data */
-	memcpy(skbdesc->iv, skb->data + header_length, iv_len);
+	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
 
 	/* Move ieee80211 header */
-	memmove(skb->data + iv_len, skb->data, header_length);
+	memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset);
 
 	/* Pull buffer to correct size */
-	skb_pull(skb, iv_len);
+	skb_pull(skb, txdesc->iv_len);
 
 	/* IV/EIV data has officially be stripped */
-	skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+	skbdesc->flags |= SKBDESC_IV_STRIPPED;
 }
 
-void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 	const unsigned int iv_len =
 	    ((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4);
 
-	if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+	if (!(skbdesc->flags & SKBDESC_IV_STRIPPED))
 		return;
 
 	skb_push(skb, iv_len);
@@ -155,14 +153,15 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
 	memcpy(skb->data + header_length, skbdesc->iv, iv_len);
 
 	/* IV/EIV data has returned into the frame */
-	skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+	skbdesc->flags &= ~SKBDESC_IV_STRIPPED;
 }
 
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
 			       unsigned int header_length,
 			       struct rxdone_entry_desc *rxdesc)
 {
 	unsigned int payload_len = rxdesc->size - header_length;
+	unsigned int align = ALIGN_SIZE(skb, header_length);
 	unsigned int iv_len;
 	unsigned int icv_len;
 	unsigned int transfer = 0;
@@ -192,32 +191,48 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
 	}
 
 	/*
-	 * Make room for new data, note that we increase both
-	 * headsize and tailsize when required. The tailsize is
-	 * only needed when ICV data needs to be inserted and
-	 * the padding is smaller than the ICV data.
-	 * When alignment requirements is greater than the
-	 * ICV data we must trim the skb to the correct size
-	 * because we need to remove the extra bytes.
+	 * Make room for new data. There are 2 possibilities
+	 * either the alignment is already present between
+	 * the 802.11 header and payload. In that case we
+	 * we have to move the header less then the iv_len
+	 * since we can use the already available l2pad bytes
+	 * for the iv data.
+	 * When the alignment must be added manually we must
+	 * move the header more then iv_len since we must
+	 * make room for the payload move as well.
 	 */
-	skb_push(skb, iv_len + align);
-	if (align < icv_len)
-		skb_put(skb, icv_len - align);
-	else if (align > icv_len)
-		skb_trim(skb, rxdesc->size + iv_len + icv_len);
+	if (l2pad) {
+		skb_push(skb, iv_len - align);
+		skb_put(skb, icv_len);
 
-	/* Move ieee80211 header */
-	memmove(skb->data + transfer,
-		skb->data + transfer + iv_len + align,
-		header_length);
-	transfer += header_length;
+		/* Move ieee80211 header */
+		memmove(skb->data + transfer,
+			skb->data + transfer + (iv_len - align),
+			header_length);
+		transfer += header_length;
+	} else {
+		skb_push(skb, iv_len + align);
+		if (align < icv_len)
+			skb_put(skb, icv_len - align);
+		else if (align > icv_len)
+			skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+		/* Move ieee80211 header */
+		memmove(skb->data + transfer,
+			skb->data + transfer + iv_len + align,
+			header_length);
+		transfer += header_length;
+	}
 
 	/* Copy IV/EIV data */
 	memcpy(skb->data + transfer, rxdesc->iv, iv_len);
 	transfer += iv_len;
 
-	/* Move payload */
-	if (align) {
+	/*
+	 * Move payload for alignment purposes. Note that
+	 * this is only needed when no l2 padding is present.
+	 */
+	if (!l2pad) {
 		memmove(skb->data + transfer,
 			skb->data + transfer + align,
 			payload_len);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 5752aaae906..57813e72c80 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -227,6 +227,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
+	unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 	u8 rate_idx, rate_flags;
 
 	/*
@@ -235,13 +236,19 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 
 	/*
+	 * Remove L2 padding which was added during
+	 */
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+		rt2x00queue_payload_align(entry->skb, true, header_length);
+
+	/*
 	 * If the IV/EIV data was stripped from the frame before it was
 	 * passed to the hardware, we should now reinsert it again because
 	 * mac80211 will expect the the same data to be present it the
 	 * frame as it was passed to us.
 	 */
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
-		rt2x00crypto_tx_insert_iv(entry->skb);
+		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
 
 	/*
 	 * Send frame to debugfs immediately, after this call is completed
@@ -253,7 +260,8 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * Update TX statistics.
 	 */
 	rt2x00dev->link.qual.tx_success +=
-	    test_bit(TXDONE_SUCCESS, &txdesc->flags);
+	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
 	rt2x00dev->link.qual.tx_failed +=
 	    test_bit(TXDONE_FAILURE, &txdesc->flags);
 
@@ -271,14 +279,16 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	tx_info->status.rates[1].idx = -1; /* terminate */
 
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-		if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
+		if (test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+				test_bit(TXDONE_UNKNOWN, &txdesc->flags))
 			tx_info->flags |= IEEE80211_TX_STAT_ACK;
 		else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
 			rt2x00dev->low_level_stats.dot11ACKFailureCount++;
 	}
 
 	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
+		if (test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+				test_bit(TXDONE_UNKNOWN, &txdesc->flags))
 			rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
 		else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
 			rt2x00dev->low_level_stats.dot11RTSFailureCount++;
@@ -316,19 +326,54 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
+static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
+					struct rxdone_entry_desc *rxdesc)
+{
+	struct ieee80211_supported_band *sband;
+	const struct rt2x00_rate *rate;
+	unsigned int i;
+	int signal;
+	int type;
+
+	/*
+	 * For non-HT rates the MCS value needs to contain the
+	 * actually used rate modulation (CCK or OFDM).
+	 */
+	if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
+		signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
+	else
+		signal = rxdesc->signal;
+
+	type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
+
+	sband = &rt2x00dev->bands[rt2x00dev->curr_band];
+	for (i = 0; i < sband->n_bitrates; i++) {
+		rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
+
+		if (((type == RXDONE_SIGNAL_PLCP) &&
+		     (rate->plcp == signal)) ||
+		    ((type == RXDONE_SIGNAL_BITRATE) &&
+		      (rate->bitrate == signal)) ||
+		    ((type == RXDONE_SIGNAL_MCS) &&
+		      (rate->mcs == signal))) {
+			return i;
+		}
+	}
+
+	WARNING(rt2x00dev, "Frame received with unrecognized signal, "
+		"signal=0x%.4x, type=%d.\n", signal, type);
+	return 0;
+}
+
 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 		      struct queue_entry *entry)
 {
 	struct rxdone_entry_desc rxdesc;
 	struct sk_buff *skb;
 	struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
-	struct ieee80211_supported_band *sband;
-	const struct rt2x00_rate *rate;
 	unsigned int header_length;
-	unsigned int align;
-	unsigned int i;
-	int idx = -1;
-
+	bool l2pad;
+	int rate_idx;
 	/*
 	 * Allocate a new sk_buffer. If no new buffer available, drop the
 	 * received frame and reuse the existing buffer.
@@ -348,12 +393,15 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	memset(&rxdesc, 0, sizeof(rxdesc));
 	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 
+	/* Trim buffer to correct size */
+	skb_trim(entry->skb, rxdesc.size);
+
 	/*
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
 	 */
 	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-	align = ((unsigned long)(entry->skb->data + header_length)) & 3;
+	l2pad = !!(rxdesc.dev_flags & RXDONE_L2PAD);
 
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
@@ -362,40 +410,24 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
-	    (rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
-		rt2x00crypto_rx_insert_iv(entry->skb, align,
-					  header_length, &rxdesc);
-	} else if (align) {
-		skb_push(entry->skb, align);
-		/* Move entire frame in 1 command */
-		memmove(entry->skb->data, entry->skb->data + align,
-			rxdesc.size);
-	}
-
-	/* Update data pointers, trim buffer to correct size */
-	skb_trim(entry->skb, rxdesc.size);
+	    (rxdesc.flags & RX_FLAG_IV_STRIPPED))
+		rt2x00crypto_rx_insert_iv(entry->skb, l2pad, header_length,
+					  &rxdesc);
+	else
+		rt2x00queue_payload_align(entry->skb, l2pad, header_length);
 
 	/*
-	 * Update RX statistics.
+	 * Check if the frame was received using HT. In that case,
+	 * the rate is the MCS index and should be passed to mac80211
+	 * directly. Otherwise we need to translate the signal to
+	 * the correct bitrate index.
 	 */
-	sband = &rt2x00dev->bands[rt2x00dev->curr_band];
-	for (i = 0; i < sband->n_bitrates; i++) {
-		rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
-
-		if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
-		     (rate->plcp == rxdesc.signal)) ||
-		    ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
-		      (rate->bitrate == rxdesc.signal))) {
-			idx = i;
-			break;
-		}
-	}
-
-	if (idx < 0) {
-		WARNING(rt2x00dev, "Frame received with unrecognized signal,"
-			"signal=0x%.2x, type=%d.\n", rxdesc.signal,
-			(rxdesc.dev_flags & RXDONE_SIGNAL_MASK));
-		idx = 0;
+	if (rxdesc.rate_mode == RATE_MODE_CCK ||
+	    rxdesc.rate_mode == RATE_MODE_OFDM) {
+		rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
+	} else {
+		rxdesc.flags |= RX_FLAG_HT;
+		rate_idx = rxdesc.signal;
 	}
 
 	/*
@@ -405,7 +437,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
 
 	rx_status->mactime = rxdesc.timestamp;
-	rx_status->rate_idx = idx;
+	rx_status->rate_idx = rate_idx;
 	rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi);
 	rx_status->signal = rxdesc.rssi;
 	rx_status->noise = rxdesc.noise;
@@ -440,72 +472,84 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = {
 		.bitrate = 10,
 		.ratemask = BIT(0),
 		.plcp = 0x00,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 0),
 	},
 	{
 		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 		.bitrate = 20,
 		.ratemask = BIT(1),
 		.plcp = 0x01,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 1),
 	},
 	{
 		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 		.bitrate = 55,
 		.ratemask = BIT(2),
 		.plcp = 0x02,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 2),
 	},
 	{
 		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 		.bitrate = 110,
 		.ratemask = BIT(3),
 		.plcp = 0x03,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 3),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 60,
 		.ratemask = BIT(4),
 		.plcp = 0x0b,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 0),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 90,
 		.ratemask = BIT(5),
 		.plcp = 0x0f,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 1),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 120,
 		.ratemask = BIT(6),
 		.plcp = 0x0a,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 2),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 180,
 		.ratemask = BIT(7),
 		.plcp = 0x0e,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 3),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 240,
 		.ratemask = BIT(8),
 		.plcp = 0x09,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 4),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 360,
 		.ratemask = BIT(9),
 		.plcp = 0x0d,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 5),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 480,
 		.ratemask = BIT(10),
 		.plcp = 0x08,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 6),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 540,
 		.ratemask = BIT(11),
 		.plcp = 0x0c,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 7),
 	},
 };
 
@@ -581,6 +625,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 		rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 		    &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
+		memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
+		       &spec->ht, sizeof(spec->ht));
 	}
 
 	/*
@@ -597,6 +643,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 		rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 		    &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
+		memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
+		       &spec->ht, sizeof(spec->ht));
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
new file mode 100644
index 00000000000..e3cec839e54
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -0,0 +1,69 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00lib
+	Abstract: rt2x00 HT specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+				   struct txentry_desc *txdesc,
+				   const struct rt2x00_rate *hwrate)
+{
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+
+	if (tx_info->control.sta)
+		txdesc->mpdu_density =
+		    tx_info->control.sta->ht_cap.ampdu_density;
+	else
+		txdesc->mpdu_density = 0;
+
+	txdesc->ba_size = 7;	/* FIXME: What value is needed? */
+	txdesc->stbc = 0;	/* FIXME: What value is needed? */
+
+	txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
+	if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+		txdesc->mcs |= 0x08;
+
+	/*
+	 * Convert flags
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+		__set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags);
+
+	/*
+	 * Determine HT Mix/Greenfield rate mode
+	 */
+	if (txrate->flags & IEEE80211_TX_RC_MCS)
+		txdesc->rate_mode = RATE_MODE_HT_MIX;
+	if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+		txdesc->rate_mode = RATE_MODE_HT_GREENFIELD;
+	if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+		__set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
+	if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
+		__set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
+}
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d..0bf2715fa93 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -32,8 +32,8 @@
  * Interval defines
  * Both the link tuner as the rfkill will be called once per second.
  */
-#define LINK_TUNE_INTERVAL	( round_jiffies_relative(HZ) )
-#define RFKILL_POLL_INTERVAL	( 1000 )
+#define LINK_TUNE_INTERVAL	round_jiffies_relative(HZ)
+#define RFKILL_POLL_INTERVAL	1000
 
 /*
  * rt2x00_rate: Per rate device information
@@ -48,6 +48,7 @@ struct rt2x00_rate {
 	unsigned short ratemask;
 
 	unsigned short plcp;
+	unsigned short mcs;
 };
 
 extern const struct rt2x00_rate rt2x00_supported_rates[12];
@@ -57,6 +58,14 @@ static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
 	return &rt2x00_supported_rates[hw_value & 0xff];
 }
 
+#define RATE_MCS(__mode, __mcs) \
+	( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) )
+
+static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
+{
+	return (mcs_value & 0x00ff);
+}
+
 /*
  * Radio control handlers.
  */
@@ -113,6 +122,23 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
+ * rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary
+ * @skb: The skb to align
+ * @l2pad: Should L2 padding be used
+ * @header_length: Length of 802.11 header
+ *
+ * This function prepares the @skb to be send to the device or mac80211.
+ * If @l2pad is set to true padding will occur between the 802.11 header
+ * and payload. Otherwise the padding will be done in front of the 802.11
+ * header.
+ * When @l2pad is set the function will check for the &SKBDESC_L2_PADDED
+ * flag in &skb_frame_desc. If that flag is set, the padding is removed
+ * and the flag cleared. Otherwise the padding is added and the flag is set.
+ */
+void rt2x00queue_payload_align(struct sk_buff *skb,
+			       bool l2pad, unsigned int header_length);
+
+/**
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
@@ -235,7 +261,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
  * Initialize work structure and all link tuning related
- * paramters. This will not start the link tuning process itself.
+ * parameters. This will not start the link tuning process itself.
  */
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
 
@@ -295,10 +321,12 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
 				       struct txentry_desc *txdesc);
 unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
 				      struct sk_buff *skb);
-void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len);
-void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
-void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
+			     struct txentry_desc *txdesc);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+			       struct txentry_desc *txdesc);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
 			       unsigned int header_length,
 			       struct rxdone_entry_desc *rxdesc);
 #else
@@ -319,21 +347,21 @@ static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev
 }
 
 static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
-					   unsigned int iv_len)
+					   struct txentry_desc *txdesc)
 {
 }
 
 static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
-					     unsigned int iv_len)
+					     struct txentry_desc *txdesc)
 {
 }
 
-static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb,
+					     unsigned int header_length)
 {
 }
 
-static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
-					     unsigned int align,
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
 					     unsigned int header_length,
 					     struct rxdone_entry_desc *rxdesc)
 {
@@ -341,6 +369,21 @@ static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
 
 /*
+ * HT handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_HT
+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+				   struct txentry_desc *txdesc,
+				   const struct rt2x00_rate *hwrate);
+#else
+static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+						 struct txentry_desc *txdesc,
+						 const struct rt2x00_rate *hwrate)
+{
+}
+#endif /* CONFIG_RT2X00_LIB_HT */
+
+/*
  * RFkill handlers.
  */
 #ifdef CONFIG_RT2X00_LIB_RFKILL
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 7eb5cd7e5f3..eb9b981b913 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -387,7 +387,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
 		rt2x00link_antenna_reset(rt2x00dev);
 }
 
-void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
+static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
 {
 	struct link_qual *qual = &rt2x00dev->link.qual;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c41a0b9e473..c4c06b4e1f0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -390,56 +390,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_config);
 
-int rt2x00mac_config_interface(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       struct ieee80211_if_conf *conf)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct rt2x00_intf *intf = vif_to_intf(vif);
-	int update_bssid = 0;
-	int status = 0;
-
-	/*
-	 * Mac80211 might be calling this function while we are trying
-	 * to remove the device or perhaps suspending it.
-	 */
-	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
-		return 0;
-
-	spin_lock(&intf->lock);
-
-	/*
-	 * conf->bssid can be NULL if coming from the internal
-	 * beacon update routine.
-	 */
-	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
-		update_bssid = 1;
-		memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
-	}
-
-	spin_unlock(&intf->lock);
-
-	/*
-	 * Call rt2x00_config_intf() outside of the spinlock context since
-	 * the call will sleep for USB drivers. By using the ieee80211_if_conf
-	 * values as arguments we make keep access to rt2x00_intf thread safe
-	 * even without the lock.
-	 */
-	rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
-			      update_bssid ? conf->bssid : NULL);
-
-	/*
-	 * Update the beacon.
-	 */
-	if (conf->changed & (IEEE80211_IFCC_BEACON |
-			     IEEE80211_IFCC_BEACON_ENABLED))
-		status = rt2x00queue_update_beacon(rt2x00dev, vif,
-						   conf->enable_beacon);
-
-	return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
-
 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
 				unsigned int *total_flags,
@@ -623,6 +573,44 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
 	unsigned int delayed = 0;
+	int update_bssid = 0;
+
+	/*
+	 * Mac80211 might be calling this function while we are trying
+	 * to remove the device or perhaps suspending it.
+	 */
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	spin_lock(&intf->lock);
+
+	/*
+	 * conf->bssid can be NULL if coming from the internal
+	 * beacon update routine.
+	 */
+	if (changes & BSS_CHANGED_BSSID) {
+		update_bssid = 1;
+		memcpy(&intf->bssid, bss_conf->bssid, ETH_ALEN);
+	}
+
+	spin_unlock(&intf->lock);
+
+	/*
+	 * Call rt2x00_config_intf() outside of the spinlock context since
+	 * the call will sleep for USB drivers. By using the ieee80211_if_conf
+	 * values as arguments we make keep access to rt2x00_intf thread safe
+	 * even without the lock.
+	 */
+	if (changes & BSS_CHANGED_BSSID)
+		rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
+				      update_bssid ? bss_conf->bssid : NULL);
+
+	/*
+	 * Update the beacon.
+	 */
+	if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED))
+		rt2x00queue_update_beacon(rt2x00dev, vif,
+					  bss_conf->enable_beacon);
 
 	/*
 	 * When the association status has changed we must reset the link
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 9730b4f8fd2..cdd5154bd4c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
 
 int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
 {
-	struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
 	struct data_queue *queue;
 	int status;
 
@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Register interrupt handler.
 	 */
-	status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
-			     IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
+	status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
+			     IRQF_SHARED, rt2x00dev->name, rt2x00dev);
 	if (status) {
 		ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
-		      pci_dev->irq, status);
+		      rt2x00dev->irq, status);
 		goto exit;
 	}
 
@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	struct ieee80211_hw *hw;
 	struct rt2x00_dev *rt2x00dev;
 	int retval;
+	u16 chip;
 
 	retval = pci_request_regions(pci_dev, pci_name(pci_dev));
 	if (retval) {
@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	rt2x00dev->dev = &pci_dev->dev;
 	rt2x00dev->ops = ops;
 	rt2x00dev->hw = hw;
+	rt2x00dev->irq = pci_dev->irq;
+	rt2x00dev->name = pci_name(pci_dev);
+
+	/*
+	 * Determine RT chipset by reading PCI header.
+	 */
+	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
+	rt2x00_set_chip_rt(rt2x00dev, chip);
 
 	retval = rt2x00pci_alloc_reg(rt2x00dev);
 	if (retval)
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index a5664bd8493..44e5b3279ca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -148,6 +148,35 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	dev_kfree_skb_any(skb);
 }
 
+void rt2x00queue_payload_align(struct sk_buff *skb,
+			       bool l2pad, unsigned int header_length)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	unsigned int frame_length = skb->len;
+	unsigned int align = ALIGN_SIZE(skb, header_length);
+
+	if (!align)
+		return;
+
+	if (l2pad) {
+		if (skbdesc->flags & SKBDESC_L2_PADDED) {
+			/* Remove L2 padding */
+			memmove(skb->data + align, skb->data, header_length);
+			skb_pull(skb, align);
+			skbdesc->flags &= ~SKBDESC_L2_PADDED;
+		} else {
+			/* Add L2 padding */
+			skb_push(skb, align);
+			memmove(skb->data, skb->data + align, header_length);
+			skbdesc->flags |= SKBDESC_L2_PADDED;
+		}
+	} else {
+		/* Generic payload alignment to 4-byte boundary */
+		skb_push(skb, align);
+		memmove(skb->data, skb->data + align, frame_length);
+	}
+}
+
 static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
 						 struct txentry_desc *txdesc)
 {
@@ -259,6 +288,12 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	txdesc->aifs = entry->queue->aifs;
 
 	/*
+	 * Header and alignment information.
+	 */
+	txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+	txdesc->l2pad = ALIGN_SIZE(entry->skb, txdesc->header_length);
+
+	/*
 	 * Check whether this frame is to be acked.
 	 */
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
@@ -326,6 +361,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * Apply TX descriptor handling by components
 	 */
 	rt2x00crypto_create_tx_descriptor(entry, txdesc);
+	rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate);
 	rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
 	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
 }
@@ -368,7 +404,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
 	struct txentry_desc txdesc;
 	struct skb_frame_desc *skbdesc;
-	unsigned int iv_len = 0;
 	u8 rate_idx, rate_flags;
 
 	if (unlikely(rt2x00queue_full(queue)))
@@ -390,9 +425,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	entry->skb = skb;
 	rt2x00queue_create_tx_descriptor(entry, &txdesc);
 
-	if (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)
-		iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;
-
 	/*
 	 * All information is retrieved from the skb->cb array,
 	 * now we should claim ownership of the driver part of that
@@ -415,11 +447,15 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
 		if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags))
-			rt2x00crypto_tx_copy_iv(skb, iv_len);
+			rt2x00crypto_tx_copy_iv(skb, &txdesc);
 		else
-			rt2x00crypto_tx_remove_iv(skb, iv_len);
+			rt2x00crypto_tx_remove_iv(skb, &txdesc);
 	}
 
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags))
+		rt2x00queue_payload_align(entry->skb, true,
+					  txdesc.header_length);
+
 	/*
 	 * It could be possible that the queue was corrupted and this
 	 * call failed. Since we always return NETDEV_TX_OK to mac80211,
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 97e2ab08f08..b5e06347c8a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -35,9 +35,12 @@
  * for USB devices this restriction does not apply, but the value of
  * 2432 makes sense since it is big enough to contain the maximum fragment
  * size according to the ieee802.11 specs.
+ * The aggregation size depends on support from the driver, but should
+ * be something around 3840 bytes.
  */
-#define DATA_FRAME_SIZE	2432
-#define MGMT_FRAME_SIZE	256
+#define DATA_FRAME_SIZE		2432
+#define MGMT_FRAME_SIZE		256
+#define AGGREGATION_SIZE	3840
 
 /**
  * DOC: Number of entries per queue
@@ -87,13 +90,16 @@ enum data_queue_qid {
  *
  * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
  * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
- * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by
  *	mac80211 but was stripped for processing by the driver.
+ * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment,
+ *	the padded bytes are located between header and payload.
  */
 enum skb_frame_desc_flags {
 	SKBDESC_DMA_MAPPED_RX = 1 << 0,
 	SKBDESC_DMA_MAPPED_TX = 1 << 1,
-	FRAME_DESC_IV_STRIPPED = 1 << 2,
+	SKBDESC_IV_STRIPPED = 1 << 2,
+	SKBDESC_L2_PADDED = 1 << 3
 };
 
 /**
@@ -145,16 +151,20 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb)
  *
  * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
  * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
+ * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value.
  * @RXDONE_MY_BSS: Does this frame originate from device's BSS.
  * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data.
  * @RXDONE_CRYPTO_ICV: Driver provided ICV data.
+ * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary.
  */
 enum rxdone_entry_desc_flags {
-	RXDONE_SIGNAL_PLCP = 1 << 0,
-	RXDONE_SIGNAL_BITRATE = 1 << 1,
-	RXDONE_MY_BSS = 1 << 2,
-	RXDONE_CRYPTO_IV = 1 << 3,
-	RXDONE_CRYPTO_ICV = 1 << 4,
+	RXDONE_SIGNAL_PLCP = BIT(0),
+	RXDONE_SIGNAL_BITRATE = BIT(1),
+	RXDONE_SIGNAL_MCS = BIT(2),
+	RXDONE_MY_BSS = BIT(3),
+	RXDONE_CRYPTO_IV = BIT(4),
+	RXDONE_CRYPTO_ICV = BIT(5),
+	RXDONE_L2PAD = BIT(6),
 };
 
 /**
@@ -163,7 +173,7 @@ enum rxdone_entry_desc_flags {
  * from &rxdone_entry_desc to a signal value type.
  */
 #define RXDONE_SIGNAL_MASK \
-       ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE )
+	( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS )
 
 /**
  * struct rxdone_entry_desc: RX Entry descriptor
@@ -177,6 +187,7 @@ enum rxdone_entry_desc_flags {
  * @size: Data size of the received frame.
  * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
  * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
+ * @rate_mode: Rate mode (See @enum rate_modulation).
  * @cipher: Cipher type used during decryption.
  * @cipher_status: Decryption status.
  * @iv: IV/EIV data used during decryption.
@@ -190,6 +201,7 @@ struct rxdone_entry_desc {
 	int size;
 	int flags;
 	int dev_flags;
+	u16 rate_mode;
 	u8 cipher;
 	u8 cipher_status;
 
@@ -243,6 +255,9 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
  * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
  * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
+ * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU.
+ * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth.
+ * @ENTRY_TXD_HT_SHORT_GI: Use short GI.
  */
 enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
@@ -258,6 +273,9 @@ enum txentry_desc_flags {
 	ENTRY_TXD_ENCRYPT_PAIRWISE,
 	ENTRY_TXD_ENCRYPT_IV,
 	ENTRY_TXD_ENCRYPT_MMIC,
+	ENTRY_TXD_HT_AMPDU,
+	ENTRY_TXD_HT_BW_40,
+	ENTRY_TXD_HT_SHORT_GI,
 };
 
 /**
@@ -267,11 +285,17 @@ enum txentry_desc_flags {
  *
  * @flags: Descriptor flags (See &enum queue_entry_flags).
  * @queue: Queue identification (See &enum data_queue_qid).
+ * @header_length: Length of 802.11 header.
+ * @l2pad: Amount of padding to align 802.11 payload to 4-byte boundrary.
  * @length_high: PLCP length high word.
  * @length_low: PLCP length low word.
  * @signal: PLCP signal.
  * @service: PLCP service.
+ * @msc: MCS.
+ * @stbc: STBC.
+ * @ba_size: BA size.
  * @rate_mode: Rate mode (See @enum rate_modulation).
+ * @mpdu_density: MDPU density.
  * @retry_limit: Max number of retries.
  * @aifs: AIFS value.
  * @ifs: IFS value.
@@ -280,18 +304,26 @@ enum txentry_desc_flags {
  * @cipher: Cipher type used for encryption.
  * @key_idx: Key index used for encryption.
  * @iv_offset: Position where IV should be inserted by hardware.
+ * @iv_len: Length of IV data.
  */
 struct txentry_desc {
 	unsigned long flags;
 
 	enum data_queue_qid queue;
 
+	u16 header_length;
+	u16 l2pad;
+
 	u16 length_high;
 	u16 length_low;
 	u16 signal;
 	u16 service;
 
+	u16 mcs;
+	u16 stbc;
+	u16 ba_size;
 	u16 rate_mode;
+	u16 mpdu_density;
 
 	short retry_limit;
 	short aifs;
@@ -302,6 +334,7 @@ struct txentry_desc {
 	enum cipher cipher;
 	u16 key_idx;
 	u16 iv_offset;
+	u16 iv_len;
 };
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 2ca8b7a9722..49b29ff90c4 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -603,15 +603,22 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 			   !!erp->short_preamble);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
 
+	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
 	rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
 	rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -938,25 +945,6 @@ static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
-static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
-				    struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
-}
-
 static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -968,7 +956,7 @@ static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00pci_register_read(rt2x00dev, MAC_CSR11, &reg);
 		rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
-				   libconf->conf->beacon_int - 10);
+				   rt2x00dev->beacon_int - 10);
 		rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 		rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
@@ -1016,8 +1004,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 		rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt61pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt61pci_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt61pci_config_ps(rt2x00dev, libconf);
 }
@@ -2308,7 +2294,6 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 	u16 value;
 	u16 eeprom;
-	u16 device;
 
 	/*
 	 * Read EEPROM word for configuration.
@@ -2317,14 +2302,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 
 	/*
 	 * Identify RF chipset.
-	 * To determine the RT chip we have to read the
-	 * PCI header of the device.
 	 */
-	pci_read_config_word(to_pci_dev(rt2x00dev->dev),
-			     PCI_CONFIG_HEADER_DEVICE, &device);
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, device, value, reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
@@ -2740,7 +2721,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 41e8959919f..6c71f77c816 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -63,12 +63,6 @@
  */
 
 /*
- * PCI Configuration Header
- */
-#define PCI_CONFIG_HEADER_VENDOR	0x0000
-#define PCI_CONFIG_HEADER_DEVICE	0x0002
-
-/*
  * HOST_CMD_CSR: For HOST to interrupt embedded processor
  */
 #define HOST_CMD_CSR			0x0008
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 853b2b279b6..c18848836f2 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -566,15 +566,22 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 			   !!erp->short_preamble);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
 
+	rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR9, &reg);
 	rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
 	rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -834,25 +841,6 @@ static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
-static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
-				    struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
-}
-
 static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -864,7 +852,7 @@ static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00usb_register_read(rt2x00dev, MAC_CSR11, &reg);
 		rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
-				   libconf->conf->beacon_int - 10);
+				   rt2x00dev->beacon_int - 10);
 		rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 		rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
@@ -906,8 +894,6 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
 		rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt73usb_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt73usb_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt73usb_config_ps(rt2x00dev, libconf);
 }
@@ -1846,7 +1832,8 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
+	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2259,7 +2246,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile
index c113b3e6904..37e3d4db0c4 100644
--- a/drivers/net/wireless/rtl818x/Makefile
+++ b/drivers/net/wireless/rtl818x/Makefile
@@ -1,5 +1,5 @@
 rtl8180-objs		:= rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
-rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o
+rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o
 
 obj-$(CONFIG_RTL8180)	+= rtl8180.o
 obj-$(CONFIG_RTL8187)	+= rtl8187.o
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 387c133ec0f..7e65d7c3180 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -702,30 +702,26 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int rtl8180_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
-	if (is_valid_ether_addr(conf->bssid))
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
-	else
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
-
-	return 0;
-}
-
 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 				     struct ieee80211_vif *vif,
 				     struct ieee80211_bss_conf *info,
 				     u32 changed)
 {
 	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	if (changed & BSS_CHANGED_BSSID) {
+		for (i = 0; i < ETH_ALEN; i++)
+			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+					 info->bssid[i]);
+
+		if (is_valid_ether_addr(info->bssid))
+			rtl818x_iowrite8(priv, &priv->map->MSR,
+					 RTL818X_MSR_INFRA);
+		else
+			rtl818x_iowrite8(priv, &priv->map->MSR,
+					 RTL818X_MSR_NO_LINK);
+	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
 	        priv->rf->conf_erp(dev, info);
@@ -770,7 +766,6 @@ static const struct ieee80211_ops rtl8180_ops = {
 	.add_interface		= rtl8180_add_interface,
 	.remove_interface	= rtl8180_remove_interface,
 	.config			= rtl8180_config,
-	.config_interface	= rtl8180_config_interface,
 	.bss_info_changed	= rtl8180_bss_info_changed,
 	.configure_filter	= rtl8180_configure_filter,
 };
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index edeff82a4d0..c09bfefc70f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -16,6 +16,7 @@
 #define RTL8187_H
 
 #include "rtl818x.h"
+#include "rtl8187_leds.h"
 
 #define RTL8187_EEPROM_TXPWR_BASE	0x05
 #define RTL8187_EEPROM_MAC_ADDR		0x07
@@ -102,6 +103,12 @@ struct rtl8187_priv {
 	struct usb_anchor anchored;
 	struct delayed_work work;
 	struct ieee80211_hw *dev;
+#ifdef CONFIG_RTL8187_LEDS
+	struct rtl8187_led led_tx;
+	struct rtl8187_led led_rx;
+	struct delayed_work led_on;
+	struct delayed_work led_off;
+#endif
 	u16 txpwr_base;
 	u8 asic_rev;
 	u8 is_rtl8187b;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index d51ba0a88c2..294250e294d 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -29,6 +29,9 @@
 
 #include "rtl8187.h"
 #include "rtl8187_rtl8225.h"
+#ifdef CONFIG_RTL8187_LEDS
+#include "rtl8187_leds.h"
+#endif
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
@@ -320,12 +323,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	unsigned long f;
 
 	spin_lock_irqsave(&priv->rx_queue.lock, f);
-	if (skb->next)
-		__skb_unlink(skb, &priv->rx_queue);
-	else {
-		spin_unlock_irqrestore(&priv->rx_queue.lock, f);
-		return;
-	}
+	__skb_unlink(skb, &priv->rx_queue);
 	spin_unlock_irqrestore(&priv->rx_queue.lock, f);
 	skb_put(skb, urb->actual_length);
 
@@ -736,10 +734,10 @@ static const u8 rtl8187b_reg_table[][3] = {
 	{0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
 	{0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
 	{0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
-	{0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x91, 0x03, 0},
+	{0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x4C, 0x00, 2},
 
-	{0x4C, 0x00, 2}, {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0},
-	{0x8E, 0x08, 0}, {0x8F, 0x00, 0}
+	{0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
+	{0x8F, 0x00, 0}
 };
 
 static int rtl8187b_init_hw(struct ieee80211_hw *dev)
@@ -1089,32 +1087,6 @@ static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int rtl8187_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-	u8 reg;
-
-	mutex_lock(&priv->conf_mutex);
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
-	if (is_valid_ether_addr(conf->bssid)) {
-		reg = RTL818X_MSR_INFRA;
-		if (priv->is_rtl8187b)
-			reg |= RTL818X_MSR_ENEDCA;
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-	} else {
-		reg = RTL818X_MSR_NO_LINK;
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-	}
-
-	mutex_unlock(&priv->conf_mutex);
-	return 0;
-}
-
 /*
  * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
  * example. Thus we have to use raw values for AC_*_PARAM register addresses.
@@ -1192,6 +1164,27 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
 				     u32 changed)
 {
 	struct rtl8187_priv *priv = dev->priv;
+	int i;
+	u8 reg;
+
+	if (changed & BSS_CHANGED_BSSID) {
+		mutex_lock(&priv->conf_mutex);
+		for (i = 0; i < ETH_ALEN; i++)
+			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+					 info->bssid[i]);
+
+		if (is_valid_ether_addr(info->bssid)) {
+			reg = RTL818X_MSR_INFRA;
+			if (priv->is_rtl8187b)
+				reg |= RTL818X_MSR_ENEDCA;
+			rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+		} else {
+			reg = RTL818X_MSR_NO_LINK;
+			rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+		}
+
+		mutex_unlock(&priv->conf_mutex);
+	}
 
 	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
 		rtl8187_conf_erp(priv, info->use_short_slot,
@@ -1273,7 +1266,6 @@ static const struct ieee80211_ops rtl8187_ops = {
 	.add_interface		= rtl8187_add_interface,
 	.remove_interface	= rtl8187_remove_interface,
 	.config			= rtl8187_config,
-	.config_interface	= rtl8187_config_interface,
 	.bss_info_changed	= rtl8187_bss_info_changed,
 	.configure_filter	= rtl8187_configure_filter,
 	.conf_tx		= rtl8187_conf_tx
@@ -1480,9 +1472,6 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		(*channel++).hw_value = txpwr >> 8;
 	}
 
-	if (priv->is_rtl8187b)
-		printk(KERN_WARNING "rtl8187: 8187B chip detected.\n");
-
 	/*
 	 * XXX: Once this driver supports anything that requires
 	 *	beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
@@ -1514,6 +1503,12 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	       wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
 	       chip_name, priv->asic_rev, priv->rf->name);
 
+#ifdef CONFIG_RTL8187_LEDS
+	eeprom_93cx6_read(&eeprom, 0x3F, &reg);
+	reg &= 0xFF;
+	rtl8187_leds_init(dev, reg);
+#endif
+
 	return 0;
 
  err_free_dmabuf:
@@ -1533,6 +1528,9 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
 	if (!dev)
 		return;
 
+#ifdef CONFIG_RTL8187_LEDS
+	rtl8187_leds_exit(dev);
+#endif
 	ieee80211_unregister_hw(dev);
 
 	priv = dev->priv;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
new file mode 100644
index 00000000000..b4425359224
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -0,0 +1,218 @@
+/*
+ * Linux LED driver for RTL8187
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#include <net/mac80211.h>
+#include <linux/usb.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rtl8187.h"
+#include "rtl8187_leds.h"
+
+static void led_turn_on(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_on.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+static void led_turn_off(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_off.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
+				   enum led_brightness brightness)
+{
+	struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
+					       led_dev);
+	struct ieee80211_hw *hw = led->dev;
+	struct rtl8187_priv *priv = hw->priv;
+
+	if (brightness == LED_OFF) {
+		queue_delayed_work(hw->workqueue, &priv->led_off, 0);
+		/* The LED is off for 1/20 sec so that it just blinks. */
+		queue_delayed_work(hw->workqueue, &priv->led_on, HZ / 20);
+	} else
+		queue_delayed_work(hw->workqueue, &priv->led_on, 0);
+}
+
+static int rtl8187_register_led(struct ieee80211_hw *dev,
+				struct rtl8187_led *led, const char *name,
+				const char *default_trigger, u8 ledpin)
+{
+	int err;
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (led->dev)
+		return -EEXIST;
+	if (!default_trigger)
+		return -EINVAL;
+	led->dev = dev;
+	led->ledpin = ledpin;
+	strncpy(led->name, name, sizeof(led->name));
+
+	led->led_dev.name = led->name;
+	led->led_dev.default_trigger = default_trigger;
+	led->led_dev.brightness_set = rtl8187_led_brightness_set;
+
+	err = led_classdev_register(&priv->udev->dev, &led->led_dev);
+	if (err) {
+		printk(KERN_INFO "LEDs: Failed to register %s\n", name);
+		led->dev = NULL;
+		return err;
+	}
+	return 0;
+}
+
+static void rtl8187_unregister_led(struct rtl8187_led *led)
+{
+	led_classdev_unregister(&led->led_dev);
+	led->dev = NULL;
+}
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+	u8 ledpin;
+	int err;
+
+	/* According to the vendor driver, the LED operation depends on the
+	 * customer ID encoded in the EEPROM
+	 */
+	printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
+	switch (custid) {
+	case EEPROM_CID_RSVD0:
+	case EEPROM_CID_RSVD1:
+	case EEPROM_CID_SERCOMM_PS:
+	case EEPROM_CID_QMI:
+	case EEPROM_CID_DELL:
+	case EEPROM_CID_TOSHIBA:
+		ledpin = LED_PIN_GPIO0;
+		break;
+	case EEPROM_CID_ALPHA0:
+		ledpin = LED_PIN_LED0;
+		break;
+	case EEPROM_CID_HW:
+		ledpin = LED_PIN_HW;
+		break;
+	default:
+		ledpin = LED_PIN_GPIO0;
+	}
+
+	INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
+	INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_tx, name,
+			 ieee80211_get_tx_led_name(dev), ledpin);
+	if (err)
+		goto error;
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_rx, name,
+			 ieee80211_get_rx_led_name(dev), ledpin);
+	if (!err) {
+		queue_delayed_work(dev->workqueue, &priv->led_on, 0);
+		return;
+	}
+	/* registration of RX LED failed - unregister TX */
+	rtl8187_unregister_led(&priv->led_tx);
+error:
+	/* If registration of either failed, cancel delayed work */
+	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
+}
+
+void rtl8187_leds_exit(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	rtl8187_unregister_led(&priv->led_tx);
+	/* turn the LED off before exiting */
+	queue_delayed_work(dev->workqueue, &priv->led_off, 0);
+	cancel_delayed_work_sync(&priv->led_off);
+	rtl8187_unregister_led(&priv->led_rx);
+}
+#endif /* def CONFIG_RTL8187_LED */
+
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.h b/drivers/net/wireless/rtl818x/rtl8187_leds.h
new file mode 100644
index 00000000000..a0332027aea
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.h
@@ -0,0 +1,57 @@
+/*
+ * Definitions for RTL8187 leds
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_LED_H
+#define RTL8187_LED_H
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#define RTL8187_LED_MAX_NAME_LEN	21
+
+#include <linux/leds.h>
+#include <linux/types.h>
+
+enum {
+	LED_PIN_LED0,
+	LED_PIN_LED1,
+	LED_PIN_GPIO0,
+	LED_PIN_HW
+};
+
+enum {
+	EEPROM_CID_RSVD0 = 0x00,
+	EEPROM_CID_RSVD1 = 0xFF,
+	EEPROM_CID_ALPHA0 = 0x01,
+	EEPROM_CID_SERCOMM_PS = 0x02,
+	EEPROM_CID_HW = 0x03,
+	EEPROM_CID_TOSHIBA = 0x04,
+	EEPROM_CID_QMI = 0x07,
+	EEPROM_CID_DELL = 0x08
+};
+
+struct rtl8187_led {
+	struct ieee80211_hw *dev;
+	/* The LED class device */
+	struct led_classdev led_dev;
+	/* The pin/method used to control the led */
+	u8 ledpin;
+	/* The unique name string for this LED device. */
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+};
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code);
+void rtl8187_leds_exit(struct ieee80211_hw *dev);
+
+#endif /* def CONFIG_RTL8187_LED */
+
+#endif /* RTL8187_LED_H */
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index f9520463269..38366a56b71 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -1540,7 +1540,7 @@ static int strip_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!netif_running(dev)) {
 		printk(KERN_ERR "%s: xmit call when iface is down\n",
 		       dev->name);
-		return (1);
+		return NETDEV_TX_BUSY;
 	}
 
 	netif_stop_queue(dev);
@@ -2509,7 +2509,7 @@ static void strip_dev_setup(struct net_device *dev)
 	 *  netdev_priv(dev) Already holds a pointer to our struct strip
 	 */
 
-	*(MetricomAddress *) & dev->broadcast = broadcast_address;
+	*(MetricomAddress *)dev->broadcast = broadcast_address;
 	dev->dev_addr[0] = 0;
 	dev->addr_len = sizeof(MetricomAddress);
 
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index 3ab3eb95718..ab7fc5c0c8b 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -2867,12 +2867,8 @@ static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
 		spin_unlock_irqrestore(&lp->spinlock, flags);
 		/* Check that we can continue */
 		if (lp->tx_n_in_use == (NTXBLOCKS - 1))
-			return 1;
+			return NETDEV_TX_BUSY;
 	}
-#ifdef DEBUG_TX_ERROR
-	if (skb->next)
-		printk(KERN_INFO "skb has next\n");
-#endif
 
 	/* Do we need some padding? */
 	/* Note : on wireless the propagation time is in the order of 1us,
@@ -2884,10 +2880,10 @@ static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
 		skb_copy_from_linear_data(skb, data, skb->len);
 		/* Write packet on the card */
 		if(wv_packet_write(dev, data, ETH_ZLEN))
-			return 1;	/* We failed */
+			return NETDEV_TX_BUSY;	/* We failed */
 	}
 	else if(wv_packet_write(dev, skb->data, skb->len))
-		return 1;	/* We failed */
+		return NETDEV_TX_BUSY;	/* We failed */
 
 
 	dev_kfree_skb(skb);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e55b33961ae..6af706408ac 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -138,7 +138,7 @@ psa_read(struct net_device *	dev,
 
 /*------------------------------------------------------------------*/
 /*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
  */
 static void
 psa_write(struct net_device *	dev,
@@ -3107,11 +3107,6 @@ wavelan_packet_xmit(struct sk_buff *	skb,
        * so the Tx buffer is now free */
     }
 
-#ifdef DEBUG_TX_ERROR
-	if (skb->next)
-		printk(KERN_INFO "skb has next\n");
-#endif
-
 	/* Check if we need some padding */
 	/* Note : on wireless the propagation time is in the order of 1us,
 	 * and we don't have the Ethernet specific requirement of beeing
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
new file mode 100644
index 00000000000..a82c4cd436d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -0,0 +1,11 @@
+config WL12XX
+	tristate "TI wl1251/wl1271 support"
+	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS && EXPERIMENTAL
+	select FW_LOADER
+	select CRC7
+	---help---
+	  This module adds support for wireless adapters based on
+	  TI wl1251/wl1271 chipsets.
+
+	  If you choose to build a module, it'll be called wl12xx. Say N if
+	  unsure.
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
new file mode 100644
index 00000000000..d43de27dc54
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -0,0 +1,4 @@
+wl12xx-objs		= main.o spi.o event.o tx.o rx.o \
+			  ps.o cmd.o acx.o boot.o init.o wl1251.o \
+			  debugfs.o
+obj-$(CONFIG_WL12XX)	+= wl12xx.o
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
new file mode 100644
index 00000000000..1cfd458ad5a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -0,0 +1,689 @@
+#include "acx.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+			   u8 mgt_rate, u8 mgt_mod)
+{
+	int ret;
+	struct acx_fw_gen_frame_rates rates;
+
+	wl12xx_debug(DEBUG_ACX, "acx frame rates");
+
+	rates.header.id = ACX_FW_GEN_FRAME_RATES;
+	rates.header.len = sizeof(struct acx_fw_gen_frame_rates) -
+		sizeof(struct acx_header);
+
+	rates.tx_ctrl_frame_rate = ctrl_rate;
+	rates.tx_ctrl_frame_mod = ctrl_mod;
+	rates.tx_mgt_frame_rate = mgt_rate;
+	rates.tx_mgt_frame_mod = mgt_mod;
+
+	ret = wl12xx_cmd_configure(wl, &rates, sizeof(rates));
+	if (ret < 0) {
+		wl12xx_error("Failed to set FW rates and modulation");
+		return ret;
+	}
+
+	return 0;
+}
+
+
+int wl12xx_acx_station_id(struct wl12xx *wl)
+{
+	int ret, i;
+	struct dot11_station_id mac;
+
+	wl12xx_debug(DEBUG_ACX, "acx dot11_station_id");
+
+	mac.header.id = DOT11_STATION_ID;
+	mac.header.len = sizeof(mac) - sizeof(struct acx_header);
+
+	for (i = 0; i < ETH_ALEN; i++)
+		mac.mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
+
+	ret = wl12xx_cmd_configure(wl, &mac, sizeof(mac));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id)
+{
+	struct acx_dot11_default_key default_key;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
+
+	default_key.header.id = DOT11_DEFAULT_KEY;
+	default_key.header.len = sizeof(default_key) -
+		sizeof(struct acx_header);
+
+	default_key.id = key_id;
+
+	ret = wl12xx_cmd_configure(wl, &default_key, sizeof(default_key));
+	if (ret < 0) {
+		wl12xx_error("Couldnt set default key");
+		return ret;
+	}
+
+	wl->default_key = key_id;
+
+	return 0;
+}
+
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval)
+{
+	struct acx_wake_up_condition wake_up;
+
+	wl12xx_debug(DEBUG_ACX, "acx wake up conditions");
+
+	wake_up.header.id = ACX_WAKE_UP_CONDITIONS;
+	wake_up.header.len = sizeof(wake_up) - sizeof(struct acx_header);
+
+	wake_up.wake_up_event = WAKE_UP_EVENT_DTIM_BITMAP;
+	wake_up.listen_interval = listen_interval;
+
+	return wl12xx_cmd_configure(wl, &wake_up, sizeof(wake_up));
+}
+
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth)
+{
+	int ret;
+	struct acx_sleep_auth auth;
+
+	wl12xx_debug(DEBUG_ACX, "acx sleep auth");
+
+	auth.header.id = ACX_SLEEP_AUTH;
+	auth.header.len = sizeof(auth) - sizeof(struct acx_header);
+
+	auth.sleep_auth = sleep_auth;
+
+	ret = wl12xx_cmd_configure(wl, &auth, sizeof(auth));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len)
+{
+	struct wl12xx_command cmd;
+	struct acx_revision *rev;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx fw rev");
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_FW_REV, sizeof(*rev), &cmd);
+	if (ret < 0) {
+		wl12xx_warning("ACX_FW_REV interrogate failed");
+		return ret;
+	}
+
+	rev = (struct acx_revision *) &cmd.parameters;
+
+	/* be careful with the buffer sizes */
+	strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+	/*
+	 * if the firmware version string is exactly
+	 * sizeof(rev->fw_version) long or fw_len is less than
+	 * sizeof(rev->fw_version) it won't be null terminated
+	 */
+	buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+	return 0;
+}
+
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power)
+{
+	struct acx_current_tx_power ie;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+	if (power < 0 || power > 25)
+		return -EINVAL;
+
+	memset(&ie, 0, sizeof(ie));
+
+	ie.header.id = DOT11_CUR_TX_PWR;
+	ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+	ie.current_tx_power = power * 10;
+
+	ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+	if (ret < 0) {
+		wl12xx_warning("configure of tx power failed: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_feature_cfg(struct wl12xx *wl)
+{
+	struct acx_feature_config feature;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx feature cfg");
+
+	memset(&feature, 0, sizeof(feature));
+
+	feature.header.id = ACX_FEATURE_CFG;
+	feature.header.len = sizeof(feature) - sizeof(struct acx_header);
+
+	/* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+	feature.data_flow_options = 0;
+	feature.options = 0;
+
+	ret = wl12xx_cmd_configure(wl, &feature, sizeof(feature));
+	if (ret < 0)
+		wl12xx_error("Couldnt set HW encryption");
+
+	return ret;
+}
+
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len)
+{
+	struct wl12xx_command cmd;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx mem map");
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_MEM_MAP, len, &cmd);
+	if (ret < 0)
+		return ret;
+	else if (cmd.status != CMD_STATUS_SUCCESS)
+		return -EIO;
+
+	memcpy(mem_map, &cmd.parameters, len);
+
+	return 0;
+}
+
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+				struct acx_data_path_params_resp *data_path)
+{
+	struct acx_data_path_params params;
+	struct wl12xx_command cmd;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx data path params");
+
+	params.rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
+	params.tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
+
+	params.rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
+	params.tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
+
+	params.tx_complete_threshold = 1;
+
+	params.tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
+
+	params.tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
+
+	params.header.id = ACX_DATA_PATH_PARAMS;
+	params.header.len = sizeof(params) - sizeof(struct acx_header);
+
+	ret = wl12xx_cmd_configure(wl, &params, sizeof(params));
+	if (ret < 0)
+		return ret;
+
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
+				     sizeof(struct acx_data_path_params_resp),
+				     &cmd);
+
+	if (ret < 0) {
+		wl12xx_warning("failed to read data path parameters: %d", ret);
+		return ret;
+	} else if (cmd.status != CMD_STATUS_SUCCESS) {
+		wl12xx_warning("data path parameter acx status failed");
+		return -EIO;
+	}
+
+	memcpy(data_path, &cmd.parameters, sizeof(*data_path));
+
+	return 0;
+}
+
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time)
+{
+	struct rx_msdu_lifetime msdu_lifetime;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx rx msdu life time");
+
+	msdu_lifetime.header.id = DOT11_RX_MSDU_LIFE_TIME;
+	msdu_lifetime.header.len = sizeof(msdu_lifetime) -
+		sizeof(struct acx_header);
+	msdu_lifetime.lifetime = life_time;
+
+	ret = wl12xx_cmd_configure(wl, &msdu_lifetime, sizeof(msdu_lifetime));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rx msdu life time: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+	struct acx_rx_config rx_config;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx rx config");
+
+	rx_config.header.id = ACX_RX_CFG;
+	rx_config.header.len = sizeof(rx_config) - sizeof(struct acx_header);
+	rx_config.config_options = config;
+	rx_config.filter_options = filter;
+
+	ret = wl12xx_cmd_configure(wl, &rx_config, sizeof(rx_config));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rx config: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_pd_threshold(struct wl12xx *wl)
+{
+	struct acx_packet_detection packet_detection;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx data pd threshold");
+
+	/* FIXME: threshold value not set */
+	packet_detection.header.id = ACX_PD_THRESHOLD;
+	packet_detection.header.len = sizeof(packet_detection) -
+		sizeof(struct acx_header);
+
+	ret = wl12xx_cmd_configure(wl, &packet_detection,
+				   sizeof(packet_detection));
+	if (ret < 0) {
+		wl12xx_warning("failed to set pd threshold: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time)
+{
+	struct acx_slot slot;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx slot");
+
+	slot.header.id = ACX_SLOT;
+	slot.header.len = sizeof(slot) - sizeof(struct acx_header);
+
+	slot.wone_index = STATION_WONE_INDEX;
+	slot.slot_time = slot_time;
+
+	ret = wl12xx_cmd_configure(wl, &slot, sizeof(slot));
+	if (ret < 0) {
+		wl12xx_warning("failed to set slot time: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl)
+{
+	struct multicast_grp_addr_start multicast;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx group address tbl");
+
+	/* MAC filtering */
+	multicast.header.id = DOT11_GROUP_ADDRESS_TBL;
+	multicast.header.len = sizeof(multicast) - sizeof(struct acx_header);
+
+	multicast.enabled = 0;
+	multicast.num_groups = 0;
+	memset(multicast.mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+	ret = wl12xx_cmd_configure(wl, &multicast, sizeof(multicast));
+	if (ret < 0) {
+		wl12xx_warning("failed to set group addr table: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl)
+{
+	struct acx_rx_timeout rx_timeout;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx service period timeout");
+
+	/* RX timeout */
+	rx_timeout.header.id = ACX_SERVICE_PERIOD_TIMEOUT;
+	rx_timeout.header.len = sizeof(rx_timeout) - sizeof(struct acx_header);
+
+	rx_timeout.ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+	rx_timeout.upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+	ret = wl12xx_cmd_configure(wl, &rx_timeout, sizeof(rx_timeout));
+	if (ret < 0) {
+		wl12xx_warning("failed to set service period timeout: %d",
+			       ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold)
+{
+	struct acx_rts_threshold rts;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx rts threshold");
+
+	rts.header.id = DOT11_RTS_THRESHOLD;
+	rts.header.len = sizeof(rts) - sizeof(struct acx_header);
+
+	rts.threshold = rts_threshold;
+
+	ret = wl12xx_cmd_configure(wl, &rts, sizeof(rts));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rts threshold: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl)
+{
+	struct acx_beacon_filter_option beacon_filter;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx beacon filter opt");
+
+	beacon_filter.header.id = ACX_BEACON_FILTER_OPT;
+	beacon_filter.header.len = sizeof(beacon_filter) -
+		sizeof(struct acx_header);
+
+	beacon_filter.enable = 0;
+	beacon_filter.max_num_beacons = 0;
+
+	ret = wl12xx_cmd_configure(wl, &beacon_filter, sizeof(beacon_filter));
+	if (ret < 0) {
+		wl12xx_warning("failed to set beacon filter opt: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl)
+{
+	struct acx_beacon_filter_ie_table ie_table;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx beacon filter table");
+
+	ie_table.header.id = ACX_BEACON_FILTER_TABLE;
+	ie_table.header.len = sizeof(ie_table) - sizeof(struct acx_header);
+
+	ie_table.num_ie = 0;
+	memset(ie_table.table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+
+	ret = wl12xx_cmd_configure(wl, &ie_table, sizeof(ie_table));
+	if (ret < 0) {
+		wl12xx_warning("failed to set beacon filter table: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_sg_enable(struct wl12xx *wl)
+{
+	struct acx_bt_wlan_coex pta;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx sg enable");
+
+	pta.header.id = ACX_SG_ENABLE;
+	pta.header.len = sizeof(pta) - sizeof(struct acx_header);
+
+	pta.enable = SG_ENABLE;
+
+	ret = wl12xx_cmd_configure(wl, &pta, sizeof(pta));
+	if (ret < 0) {
+		wl12xx_warning("failed to set softgemini enable: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_sg_cfg(struct wl12xx *wl)
+{
+	struct acx_bt_wlan_coex_param param;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx sg cfg");
+
+	/* BT-WLAN coext parameters */
+	param.header.id = ACX_SG_CFG;
+	param.header.len = sizeof(param) - sizeof(struct acx_header);
+
+	param.min_rate = RATE_INDEX_24MBPS;
+	param.bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+	param.wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+	param.sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+	param.rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+	param.tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+	param.rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+	param.tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+	param.wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+	param.bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+	param.next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+	param.wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+	param.hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+	param.next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+	param.antenna_type = PTA_ANTENNA_TYPE_DEF;
+	param.signal_type = PTA_SIGNALING_TYPE_DEF;
+	param.afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+	param.quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+	param.max_cts = PTA_MAX_NUM_CTS_DEF;
+	param.wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+	param.bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+	param.missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+	param.wlan_elp_hp = PTA_ELP_HP_DEF;
+	param.bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+	param.ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+	param.pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+	param.pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+	param.bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+	ret = wl12xx_cmd_configure(wl, &param, sizeof(param));
+	if (ret < 0) {
+		wl12xx_warning("failed to set sg config: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_cca_threshold(struct wl12xx *wl)
+{
+	struct acx_energy_detection detection;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx cca threshold");
+
+	detection.header.id = ACX_CCA_THRESHOLD;
+	detection.header.len = sizeof(detection) - sizeof(struct acx_header);
+
+	detection.rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+	detection.tx_energy_detection = 0;
+
+	ret = wl12xx_cmd_configure(wl, &detection, sizeof(detection));
+	if (ret < 0) {
+		wl12xx_warning("failed to set cca threshold: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl)
+{
+	struct acx_beacon_broadcast bb;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx bcn dtim options");
+
+	bb.header.id = ACX_BCN_DTIM_OPTIONS;
+	bb.header.len = sizeof(bb) - sizeof(struct acx_header);
+
+	bb.beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+	bb.broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+	bb.rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+	bb.ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+	ret = wl12xx_cmd_configure(wl, &bb, sizeof(bb));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rx config: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid)
+{
+	struct acx_aid acx_aid;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx aid");
+
+	acx_aid.header.id = ACX_AID;
+	acx_aid.header.len = sizeof(acx_aid) - sizeof(struct acx_header);
+
+	acx_aid.aid = aid;
+
+	ret = wl12xx_cmd_configure(wl, &acx_aid, sizeof(acx_aid));
+	if (ret < 0) {
+		wl12xx_warning("failed to set aid: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask)
+{
+	struct acx_event_mask mask;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx event mbox mask");
+
+	mask.header.id = ACX_EVENT_MBOX_MASK;
+	mask.header.len = sizeof(mask) - sizeof(struct acx_header);
+
+	/* high event mask is unused */
+	mask.high_event_mask = 0xffffffff;
+
+	mask.event_mask = event_mask;
+
+	ret = wl12xx_cmd_configure(wl, &mask, sizeof(mask));
+	if (ret < 0) {
+		wl12xx_warning("failed to set aid: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble)
+{
+	struct acx_preamble ie;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx_set_preamble");
+
+	memset(&ie, 0, sizeof(ie));
+
+	ie.header.id = ACX_PREAMBLE_TYPE;
+	ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+	ie.preamble = preamble;
+	ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+	if (ret < 0) {
+		wl12xx_warning("Setting of preamble failed: %d", ret);
+		return ret;
+	}
+	return 0;
+}
+
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+			   enum acx_ctsprotect_type ctsprotect)
+{
+	struct acx_ctsprotect ie;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+	memset(&ie, 0, sizeof(ie));
+
+	ie.header.id = ACX_CTS_PROTECTION;
+	ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+	ie.ctsprotect = ctsprotect;
+	ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+	if (ret < 0) {
+		wl12xx_warning("Setting of ctsprotect failed: %d", ret);
+		return ret;
+	}
+	return 0;
+}
+
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats)
+{
+	struct wl12xx_command *answer;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx statistics");
+
+	answer = kmalloc(sizeof(*answer), GFP_KERNEL);
+	if (!answer) {
+		wl12xx_warning("could not allocate memory for acx statistics");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_STATISTICS, sizeof(*answer),
+				     answer);
+	if (ret < 0) {
+		wl12xx_warning("acx statistics failed: %d", ret);
+		goto out;
+	}
+
+	memcpy(stats, answer->parameters, sizeof(*stats));
+
+out:
+	kfree(answer);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
new file mode 100644
index 00000000000..fb2d2340993
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -0,0 +1,1245 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_ACX_H__
+#define __WL12XX_ACX_H__
+
+#include "wl12xx.h"
+
+/* Target's information element */
+struct acx_header {
+	u16 id;
+	u16 len;
+};
+
+struct acx_error_counter {
+	struct acx_header header;
+
+	/* The number of PLCP errors since the last time this */
+	/* information element was interrogated. This field is */
+	/* automatically cleared when it is interrogated.*/
+	u32 PLCP_error;
+
+	/* The number of FCS errors since the last time this */
+	/* information element was interrogated. This field is */
+	/* automatically cleared when it is interrogated.*/
+	u32 FCS_error;
+
+	/* The number of MPDUs without PLCP header errors received*/
+	/* since the last time this information element was interrogated. */
+	/* This field is automatically cleared when it is interrogated.*/
+	u32 valid_frame;
+
+	/* the number of missed sequence numbers in the squentially */
+	/* values of frames seq numbers */
+	u32 seq_num_miss;
+} __attribute__ ((packed));
+
+struct acx_revision {
+	struct acx_header header;
+
+	/*
+	 * The WiLink firmware version, an ASCII string x.x.x.x,
+	 * that uniquely identifies the current firmware.
+	 * The left most digit is incremented each time a
+	 * significant change is made to the firmware, such as
+	 * code redesign or new platform support.
+	 * The second digit is incremented when major enhancements
+	 * are added or major fixes are made.
+	 * The third digit is incremented for each GA release.
+	 * The fourth digit is incremented for each build.
+	 * The first two digits identify a firmware release version,
+	 * in other words, a unique set of features.
+	 * The first three digits identify a GA release.
+	 */
+	char fw_version[20];
+
+	/*
+	 * This 4 byte field specifies the WiLink hardware version.
+	 * bits 0  - 15: Reserved.
+	 * bits 16 - 23: Version ID - The WiLink version ID
+	 *              (1 = first spin, 2 = second spin, and so on).
+	 * bits 24 - 31: Chip ID - The WiLink chip ID.
+	 */
+	u32 hw_version;
+} __attribute__ ((packed));
+
+enum wl12xx_psm_mode {
+	/* Active mode */
+	WL12XX_PSM_CAM = 0,
+
+	/* Power save mode */
+	WL12XX_PSM_PS = 1,
+
+	/* Extreme low power */
+	WL12XX_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+	struct acx_header header;
+
+	/* The sleep level authorization of the device. */
+	/* 0 - Always active*/
+	/* 1 - Power down mode: light / fast sleep*/
+	/* 2 - ELP mode: Deep / Max sleep*/
+	u8  sleep_auth;
+	u8  padding[3];
+} __attribute__ ((packed));
+
+#define TIM_ELE_ID    5
+#define PARTIAL_VBM_MAX    251
+
+struct tim {
+	u8 identity;
+	u8 length;
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __attribute__ ((packed));
+
+/* Virtual Bit Map update */
+struct vbm_update_request {
+	__le16 len;
+	u8  padding[2];
+	struct tim tim;
+} __attribute__ ((packed));
+
+enum {
+	HOSTIF_PCI_MASTER_HOST_INDIRECT,
+	HOSTIF_PCI_MASTER_HOST_DIRECT,
+	HOSTIF_SLAVE,
+	HOSTIF_PKT_RING,
+	HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY          0
+#define DEFAULT_RX_Q_PRIORITY           0
+#define DEFAULT_NUM_STATIONS            1
+#define DEFAULT_RXQ_PRIORITY            0 /* low 0 .. 15 high  */
+#define DEFAULT_RXQ_TYPE                0x07    /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE           256
+
+#define  DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define  DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define  DP_RX_PACKET_RING_CHUNK_NUM 2
+#define  DP_TX_PACKET_RING_CHUNK_NUM 2
+#define  DP_TX_COMPLETE_TIME_OUT 20
+#define  FW_TX_CMPLT_BLOCK_SIZE 16
+
+struct acx_data_path_params {
+	struct acx_header header;
+
+	u16 rx_packet_ring_chunk_size;
+	u16 tx_packet_ring_chunk_size;
+
+	u8 rx_packet_ring_chunk_num;
+	u8 tx_packet_ring_chunk_num;
+
+	/*
+	 * Maximum number of packets that can be gathered
+	 * in the TX complete ring before an interrupt
+	 * is generated.
+	 */
+	u8 tx_complete_threshold;
+
+	/* Number of pending TX complete entries in cyclic ring.*/
+	u8 tx_complete_ring_depth;
+
+	/*
+	 * Max num microseconds since a packet enters the TX
+	 * complete ring until an interrupt is generated.
+	 */
+	u32 tx_complete_timeout;
+} __attribute__ ((packed));
+
+
+struct acx_data_path_params_resp {
+	struct acx_header header;
+
+	u16 rx_packet_ring_chunk_size;
+	u16 tx_packet_ring_chunk_size;
+
+	u8 rx_packet_ring_chunk_num;
+	u8 tx_packet_ring_chunk_num;
+
+	u8 pad[2];
+
+	u32 rx_packet_ring_addr;
+	u32 tx_packet_ring_addr;
+
+	u32 rx_control_addr;
+	u32 tx_control_addr;
+
+	u32 tx_complete_addr;
+} __attribute__ ((packed));
+
+#define TX_MSDU_LIFETIME_MIN       0
+#define TX_MSDU_LIFETIME_MAX       3000
+#define TX_MSDU_LIFETIME_DEF       512
+#define RX_MSDU_LIFETIME_MIN       0
+#define RX_MSDU_LIFETIME_MAX       0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF       512000
+
+struct rx_msdu_lifetime {
+	struct acx_header header;
+
+	/*
+	 * The maximum amount of time, in TU, before the
+	 * firmware discards the MSDU.
+	 */
+	u32 lifetime;
+} __attribute__ ((packed));
+
+/*
+ * RX Config Options Table
+ * Bit		Definition
+ * ===		==========
+ * 31:14		Reserved
+ * 13		Copy RX Status - when set, write three receive status words
+ * 	 	to top of rx'd MPDUs.
+ * 		When cleared, do not write three status words (added rev 1.5)
+ * 12		Reserved
+ * 11		RX Complete upon FCS error - when set, give rx complete
+ *	 	interrupt for FCS errors, after the rx filtering, e.g. unicast
+ *	 	frames not to us with FCS error will not generate an interrupt.
+ * 10		SSID Filter Enable - When set, the WiLink discards all beacon,
+ *	        probe request, and probe response frames with an SSID that does
+ *		not match the SSID specified by the host in the START/JOIN
+ *		command.
+ *		When clear, the WiLink receives frames with any SSID.
+ * 9		Broadcast Filter Enable - When set, the WiLink discards all
+ * 	 	broadcast frames. When clear, the WiLink receives all received
+ *		broadcast frames.
+ * 8:6		Reserved
+ * 5		BSSID Filter Enable - When set, the WiLink discards any frames
+ * 	 	with a BSSID that does not match the BSSID specified by the
+ *		host.
+ *		When clear, the WiLink receives frames from any BSSID.
+ * 4		MAC Addr Filter - When set, the WiLink discards any frames
+ * 	 	with a destination address that does not match the MAC address
+ *		of the adaptor.
+ *		When clear, the WiLink receives frames destined to any MAC
+ *		address.
+ * 3		Promiscuous - When set, the WiLink receives all valid frames
+ * 	 	(i.e., all frames that pass the FCS check).
+ *		When clear, only frames that pass the other filters specified
+ *		are received.
+ * 2		FCS - When set, the WiLink includes the FCS with the received
+ *	 	frame.
+ *		When cleared, the FCS is discarded.
+ * 1		PLCP header - When set, write all data from baseband to frame
+ * 	 	buffer including PHY header.
+ * 0		Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit		Definition
+ * ===		==========
+ * 31:12		Reserved - Always equal to 0.
+ * 11		Association - When set, the WiLink receives all association
+ * 	 	related frames (association request/response, reassocation
+ *		request/response, and disassociation). When clear, these frames
+ *		are discarded.
+ * 10		Auth/De auth - When set, the WiLink receives all authentication
+ * 	 	and de-authentication frames. When clear, these frames are
+ *		discarded.
+ * 9		Beacon - When set, the WiLink receives all beacon frames.
+ * 	 	When clear, these frames are discarded.
+ * 8		Contention Free - When set, the WiLink receives all contention
+ * 	 	free frames.
+ *		When clear, these frames are discarded.
+ * 7		Control - When set, the WiLink receives all control frames.
+ * 	 	When clear, these frames are discarded.
+ * 6		Data - When set, the WiLink receives all data frames.
+ * 	 	When clear, these frames are discarded.
+ * 5		FCS Error - When set, the WiLink receives frames that have FCS
+ *	 	errors.
+ *		When clear, these frames are discarded.
+ * 4		Management - When set, the WiLink receives all management
+ *		frames.
+ * 	 	When clear, these frames are discarded.
+ * 3		Probe Request - When set, the WiLink receives all probe request
+ * 	 	frames.
+ *		When clear, these frames are discarded.
+ * 2		Probe Response - When set, the WiLink receives all probe
+ * 		response frames.
+ *		When clear, these frames are discarded.
+ * 1		RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * 	 	frames.
+ *		When clear, these frames are discarded.
+ * 0		Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * 	 	that have reserved frame types and sub types as defined by the
+ *		802.11 specification.
+ *		When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+	struct acx_header header;
+
+	u32 config_options;
+	u32 filter_options;
+} __attribute__ ((packed));
+
+enum {
+	QOS_AC_BE = 0,
+	QOS_AC_BK,
+	QOS_AC_VI,
+	QOS_AC_VO,
+	QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
+};
+
+#define MAX_NUM_OF_AC             (QOS_HIGHEST_AC_INDEX+1)
+#define FIRST_AC_INDEX            QOS_AC_BE
+#define MAX_NUM_OF_802_1d_TAGS    8
+#define AC_PARAMS_MAX_TSID        15
+#define MAX_APSD_CONF             0xffff
+
+#define  QOS_TX_HIGH_MIN      (0)
+#define  QOS_TX_HIGH_MAX      (100)
+
+#define  QOS_TX_HIGH_BK_DEF   (25)
+#define  QOS_TX_HIGH_BE_DEF   (35)
+#define  QOS_TX_HIGH_VI_DEF   (35)
+#define  QOS_TX_HIGH_VO_DEF   (35)
+
+#define  QOS_TX_LOW_BK_DEF    (15)
+#define  QOS_TX_LOW_BE_DEF    (25)
+#define  QOS_TX_LOW_VI_DEF    (25)
+#define  QOS_TX_LOW_VO_DEF    (25)
+
+struct acx_tx_queue_qos_config {
+	struct acx_header header;
+
+	u8 qid;
+	u8 pad[3];
+
+	/* Max number of blocks allowd in the queue */
+	u16 high_threshold;
+
+	/* Lowest memory blocks guaranteed for this queue */
+	u16 low_threshold;
+} __attribute__ ((packed));
+
+struct acx_packet_detection {
+	struct acx_header header;
+
+	u32 threshold;
+} __attribute__ ((packed));
+
+
+enum acx_slot_type {
+	SLOT_TIME_LONG = 0,
+	SLOT_TIME_SHORT = 1,
+	DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+	MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+	struct acx_header header;
+
+	u8 wone_index; /* Reserved */
+	u8 slot_time;
+	u8 reserved[6];
+} __attribute__ ((packed));
+
+
+#define ADDRESS_GROUP_MAX	(8)
+#define ADDRESS_GROUP_MAX_LEN	(ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct multicast_grp_addr_start {
+	struct acx_header header;
+
+	u8 enabled;
+	u8 num_groups;
+	u8 pad[2];
+	u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __attribute__ ((packed));
+
+
+#define  RX_TIMEOUT_PS_POLL_MIN    0
+#define  RX_TIMEOUT_PS_POLL_MAX    (200000)
+#define  RX_TIMEOUT_PS_POLL_DEF    (15)
+#define  RX_TIMEOUT_UPSD_MIN       0
+#define  RX_TIMEOUT_UPSD_MAX       (200000)
+#define  RX_TIMEOUT_UPSD_DEF       (15)
+
+struct acx_rx_timeout {
+	struct acx_header header;
+
+	/*
+	 * The longest time the STA will wait to receive
+	 * traffic from the AP after a PS-poll has been
+	 * transmitted.
+	 */
+	u16 ps_poll_timeout;
+
+	/*
+	 * The longest time the STA will wait to receive
+	 * traffic from the AP after a frame has been sent
+	 * from an UPSD enabled queue.
+	 */
+	u16 upsd_timeout;
+} __attribute__ ((packed));
+
+#define RTS_THRESHOLD_MIN              0
+#define RTS_THRESHOLD_MAX              4096
+#define RTS_THRESHOLD_DEF              2347
+
+struct acx_rts_threshold {
+	struct acx_header header;
+
+	u16 threshold;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_beacon_filter_option {
+	struct acx_header header;
+
+	u8 enable;
+
+	/*
+	 * The number of beacons without the unicast TIM
+	 * bit set that the firmware buffers before
+	 * signaling the host about ready frames.
+	 * When set to 0 and the filter is enabled, beacons
+	 * without the unicast TIM bit set are dropped.
+	 */
+	u8 max_num_beacons;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset     Size (Bytes)    Definition
+ * ===========     ============    ==========
+ * 0				1               IE identifier
+ * 1               1               Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset     Size (Bytes)    Definition
+ * ===========     ============    ==========
+ * 0               1               IE identifier
+ * 1               1               Treatment bit mask
+ * 2               3               OUI
+ * 5               1               Type
+ * 6               2               Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define	BEACON_FILTER_TABLE_MAX_IE_NUM		       (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE	       (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+			    BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+			   (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+			    BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+struct acx_beacon_filter_ie_table {
+	struct acx_header header;
+
+	u8 num_ie;
+	u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+	u8 pad[3];
+} __attribute__ ((packed));
+
+enum {
+	SG_ENABLE = 0,
+	SG_DISABLE,
+	SG_SENSE_NO_ACTIVITY,
+	SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+	struct acx_header header;
+
+	/*
+	 * 0 -> PTA enabled
+	 * 1 -> PTA disabled
+	 * 2 -> sense no active mode, i.e.
+	 *      an interrupt is sent upon
+	 *      BT activity.
+	 * 3 -> PTA is switched on in response
+	 *      to the interrupt sending.
+	 */
+	u8 enable;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+#define PTA_ANTENNA_TYPE_DEF		  (0)
+#define PTA_BT_HP_MAXTIME_DEF		  (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF	  (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF	  (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF	  (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF		  (1)
+#define PTA_AFH_LEVERAGE_ON_DEF		  (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF	  (0)
+#define PTA_MAX_NUM_CTS_DEF		  (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF	  (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF	  (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF	  (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF	  (3000)
+#define PTA_CYCLE_TIME_FAST_DEF		  (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF	  (5)
+#define PTA_ELP_HP_DEF			  (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF	  (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF	  (4)
+#define PTA_ALLOW_PA_SD_DEF		  (1)
+#define PTA_TIME_BEFORE_BEACON_DEF	  (6300)
+#define PTA_HPDM_MAX_TIME_DEF		  (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF	  (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF	  (0)
+#define PTA_BT_HP_RESPECTED_DEF		  (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF	  (24)
+#define PTA_ACK_MODE_DEF		  (1)
+
+struct acx_bt_wlan_coex_param {
+	struct acx_header header;
+
+	/*
+	 * The minimum rate of a received WLAN packet in the STA,
+	 * during protective mode, of which a new BT-HP request
+	 * during this Rx will always be respected and gain the antenna.
+	 */
+	u32 min_rate;
+
+	/* Max time the BT HP will be respected. */
+	u16 bt_hp_max_time;
+
+	/* Max time the WLAN HP will be respected. */
+	u16 wlan_hp_max_time;
+
+	/*
+	 * The time between the last BT activity
+	 * and the moment when the sense mode returns
+	 * to SENSE_INACTIVE.
+	 */
+	u16 sense_disable_timer;
+
+	/* Time before the next BT HP instance */
+	u16 rx_time_bt_hp;
+	u16 tx_time_bt_hp;
+
+	/* range: 10-20000    default: 1500 */
+	u16 rx_time_bt_hp_fast;
+	u16 tx_time_bt_hp_fast;
+
+	/* range: 2000-65535  default: 8700 */
+	u16 wlan_cycle_fast;
+
+	/* range: 0 - 15000 (Msec) default: 1000 */
+	u16 bt_anti_starvation_period;
+
+	/* range 400-10000(Usec) default: 3000 */
+	u16 next_bt_lp_packet;
+
+	/* Deafult: worst case for BT DH5 traffic */
+	u16 wake_up_beacon;
+
+	/* range: 0-50000(Usec) default: 1050 */
+	u16 hp_dm_max_guard_time;
+
+	/*
+	 * This is to prevent both BT & WLAN antenna
+	 * starvation.
+	 * Range: 100-50000(Usec) default:2550
+	 */
+	u16 next_wlan_packet;
+
+	/* 0 -> shared antenna */
+	u8 antenna_type;
+
+	/*
+	 * 0 -> TI legacy
+	 * 1 -> Palau
+	 */
+	u8 signal_type;
+
+	/*
+	 * BT AFH status
+	 * 0 -> no AFH
+	 * 1 -> from dedicated GPIO
+	 * 2 -> AFH on (from host)
+	 */
+	u8 afh_leverage_on;
+
+	/*
+	 * The number of cycles during which no
+	 * TX will be sent after 1 cycle of RX
+	 * transaction in protective mode
+	 */
+	u8 quiet_cycle_num;
+
+	/*
+	 * The maximum number of CTSs that will
+	 * be sent for receiving RX packet in
+	 * protective mode
+	 */
+	u8 max_cts;
+
+	/*
+	 * The number of WLAN packets
+	 * transferred in common mode before
+	 * switching to BT.
+	 */
+	u8 wlan_packets_num;
+
+	/*
+	 * The number of BT packets
+	 * transferred in common mode before
+	 * switching to WLAN.
+	 */
+	u8 bt_packets_num;
+
+	/* range: 1-255  default: 5 */
+	u8 missed_rx_avalanche;
+
+	/* range: 0-1    default: 1 */
+	u8 wlan_elp_hp;
+
+	/* range: 0 - 15  default: 4 */
+	u8 bt_anti_starvation_cycles;
+
+	u8 ack_mode_dual_ant;
+
+	/*
+	 * Allow PA_SD assertion/de-assertion
+	 * during enabled BT activity.
+	 */
+	u8 pa_sd_enable;
+
+	/*
+	 * Enable/Disable PTA in auto mode:
+	 * Support Both Active & P.S modes
+	 */
+	u8 pta_auto_mode_enable;
+
+	/* range: 0 - 20  default: 1 */
+	u8 bt_hp_respected_num;
+} __attribute__ ((packed));
+
+#define CCA_THRSH_ENABLE_ENERGY_D       0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D      0xFFEF
+
+struct acx_energy_detection {
+	struct acx_header header;
+
+	/* The RX Clear Channel Assessment threshold in the PHY */
+	u16 rx_cca_threshold;
+	u8 tx_energy_detection;
+	u8 pad;
+} __attribute__ ((packed));
+
+#define BCN_RX_TIMEOUT_DEF_VALUE        10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE  20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE    1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+	struct acx_header header;
+
+	u16 beacon_rx_timeout;
+	u16 broadcast_timeout;
+
+	/* Enables receiving of broadcast packets in PS mode */
+	u8 rx_broadcast_in_ps;
+
+	/* Consecutive PS Poll failures before updating the host */
+	u8 ps_poll_threshold;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_event_mask {
+	struct acx_header header;
+
+	u32 event_mask;
+	u32 high_event_mask; /* Unused */
+} __attribute__ ((packed));
+
+#define CFG_RX_FCS		BIT(2)
+#define CFG_RX_ALL_GOOD		BIT(3)
+#define CFG_UNI_FILTER_EN	BIT(4)
+#define CFG_BSSID_FILTER_EN	BIT(5)
+#define CFG_MC_FILTER_EN	BIT(6)
+#define CFG_MC_ADDR0_EN		BIT(7)
+#define CFG_MC_ADDR1_EN		BIT(8)
+#define CFG_BC_REJECT_EN	BIT(9)
+#define CFG_SSID_FILTER_EN	BIT(10)
+#define CFG_RX_INT_FCS_ERROR	BIT(11)
+#define CFG_RX_INT_ENCRYPTED	BIT(12)
+#define CFG_RX_WR_RX_STATUS	BIT(13)
+#define CFG_RX_FILTER_NULTI	BIT(14)
+#define CFG_RX_RESERVE		BIT(15)
+#define CFG_RX_TIMESTAMP_TSF	BIT(16)
+
+#define CFG_RX_RSV_EN		BIT(0)
+#define CFG_RX_RCTS_ACK		BIT(1)
+#define CFG_RX_PRSP_EN		BIT(2)
+#define CFG_RX_PREQ_EN		BIT(3)
+#define CFG_RX_MGMT_EN		BIT(4)
+#define CFG_RX_FCS_ERROR	BIT(5)
+#define CFG_RX_DATA_EN		BIT(6)
+#define CFG_RX_CTL_EN		BIT(7)
+#define CFG_RX_CF_EN		BIT(8)
+#define CFG_RX_BCN_EN		BIT(9)
+#define CFG_RX_AUTH_EN		BIT(10)
+#define CFG_RX_ASSOC_EN		BIT(11)
+
+#define SCAN_PASSIVE		BIT(0)
+#define SCAN_5GHZ_BAND		BIT(1)
+#define SCAN_TRIGGERED		BIT(2)
+#define SCAN_PRIORITY_HIGH	BIT(3)
+
+struct acx_fw_gen_frame_rates {
+	struct acx_header header;
+
+	u8 tx_ctrl_frame_rate; /* RATE_* */
+	u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
+	u8 tx_mgt_frame_rate;
+	u8 tx_mgt_frame_mod;
+} __attribute__ ((packed));
+
+/* STA MAC */
+struct dot11_station_id {
+	struct acx_header header;
+
+	u8 mac[ETH_ALEN];
+	u8 pad[2];
+} __attribute__ ((packed));
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE      0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE       0x80
+
+struct acx_feature_config {
+	struct acx_header header;
+
+	u32 options;
+	u32 data_flow_options;
+} __attribute__ ((packed));
+
+enum acx_key_action {
+	KEY_ADD_OR_REPLACE = 1,
+	KEY_REMOVE         = 2,
+	KEY_SET_ID         = 3,
+	MAX_KEY_ACTION     = 0xffff,
+};
+
+enum acx_key_type {
+	KEY_WEP_DEFAULT       = 0,
+	KEY_WEP_ADDR          = 1,
+	KEY_AES_GROUP         = 4,
+	KEY_AES_PAIRWISE      = 5,
+	KEY_WEP_GROUP         = 6,
+	KEY_TKIP_MIC_GROUP    = 10,
+	KEY_TKIP_MIC_PAIRWISE = 11,
+};
+
+/*
+ *
+ * key_type_e   key size    key format
+ * ----------   ---------   ----------
+ * 0x00         5, 13, 29   Key data
+ * 0x01         5, 13, 29   Key data
+ * 0x04         16          16 bytes of key data
+ * 0x05         16          16 bytes of key data
+ * 0x0a         32          16 bytes of TKIP key data
+ *                          8 bytes of RX MIC key data
+ *                          8 bytes of TX MIC key data
+ * 0x0b         32          16 bytes of TKIP key data
+ *                          8 bytes of RX MIC key data
+ *                          8 bytes of TX MIC key data
+ *
+ */
+
+struct acx_set_key {
+	/* Ignored for default WEP key */
+	u8 addr[ETH_ALEN];
+
+	/* key_action_e */
+	u16 key_action;
+
+	u16 reserved_1;
+
+	/* key size in bytes */
+	u8 key_size;
+
+	/* key_type_e */
+	u8 key_type;
+	u8 ssid_profile;
+
+	/*
+	 * TKIP, AES: frame's key id field.
+	 * For WEP default key: key id;
+	 */
+	u8 id;
+	u8 reserved_2[6];
+	u8 key[MAX_KEY_SIZE];
+	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __attribute__ ((packed));
+
+struct acx_current_tx_power {
+	struct acx_header header;
+
+	u8  current_tx_power;
+	u8  padding[3];
+} __attribute__ ((packed));
+
+struct acx_dot11_default_key {
+	struct acx_header header;
+
+	u8 id;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+struct acx_tsf_info {
+	struct acx_header header;
+
+	u32 current_tsf_msb;
+	u32 current_tsf_lsb;
+	u32 last_TBTT_msb;
+	u32 last_TBTT_lsb;
+	u8 last_dtim_count;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+/* 802.11 PS */
+enum acx_ps_mode {
+	STATION_ACTIVE_MODE,
+	STATION_POWER_SAVE_MODE
+};
+
+struct acx_ps_params {
+	u8 ps_mode; /* STATION_* */
+	u8 send_null_data; /* Do we have to send NULL data packet ? */
+	u8 retries; /* Number of retires for the initial NULL data packet */
+
+	 /*
+	  * TUs during which the target stays awake after switching
+	  * to power save mode.
+	  */
+	u8 hang_over_period;
+	u16 null_data_rate;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_wake_up_event {
+	WAKE_UP_EVENT_BEACON_BITMAP	= 0x01, /* Wake on every Beacon*/
+	WAKE_UP_EVENT_DTIM_BITMAP	= 0x02,	/* Wake on every DTIM*/
+	WAKE_UP_EVENT_N_DTIM_BITMAP	= 0x04, /* Wake on every Nth DTIM */
+	WAKE_UP_EVENT_N_BEACONS_BITMAP	= 0x08, /* Wake on every Nth Beacon */
+	WAKE_UP_EVENT_BITS_MASK		= 0x0F
+};
+
+struct acx_wake_up_condition {
+	struct acx_header header;
+
+	u8 wake_up_event; /* Only one bit can be set */
+	u8 listen_interval;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_aid {
+	struct acx_header header;
+
+	/*
+	 * To be set when associated with an AP.
+	 */
+	u16 aid;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_preamble_type {
+	ACX_PREAMBLE_LONG = 0,
+	ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+	struct acx_header header;
+	/*
+	 * When set, the WiLink transmits the frames with a short preamble and
+	 * when cleared, the WiLink transmits the frames with a long preamble.
+	 */
+	u8 preamble;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_ctsprotect_type {
+	CTSPROTECT_DISABLE = 0,
+	CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+	struct acx_header header;
+	u8 ctsprotect;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_tx_statistics {
+	u32 internal_desc_overflow;
+}  __attribute__ ((packed));
+
+struct acx_rx_statistics {
+	u32 out_of_mem;
+	u32 hdr_overflow;
+	u32 hw_stuck;
+	u32 dropped;
+	u32 fcs_err;
+	u32 xfr_hint_trig;
+	u32 path_reset;
+	u32 reset_counter;
+} __attribute__ ((packed));
+
+struct acx_dma_statistics {
+	u32 rx_requested;
+	u32 rx_errors;
+	u32 tx_requested;
+	u32 tx_errors;
+}  __attribute__ ((packed));
+
+struct acx_isr_statistics {
+	/* host command complete */
+	u32 cmd_cmplt;
+
+	/* fiqisr() */
+	u32 fiqs;
+
+	/* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+	u32 rx_headers;
+
+	/* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+	u32 rx_completes;
+
+	/* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+	u32 rx_mem_overflow;
+
+	/* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+	u32 rx_rdys;
+
+	/* irqisr() */
+	u32 irqs;
+
+	/* (INT_STS_ND & INT_TRIG_TX_PROC) */
+	u32 tx_procs;
+
+	/* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+	u32 decrypt_done;
+
+	/* (INT_STS_ND & INT_TRIG_DMA0) */
+	u32 dma0_done;
+
+	/* (INT_STS_ND & INT_TRIG_DMA1) */
+	u32 dma1_done;
+
+	/* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+	u32 tx_exch_complete;
+
+	/* (INT_STS_ND & INT_TRIG_COMMAND) */
+	u32 commands;
+
+	/* (INT_STS_ND & INT_TRIG_RX_PROC) */
+	u32 rx_procs;
+
+	/* (INT_STS_ND & INT_TRIG_PM_802) */
+	u32 hw_pm_mode_changes;
+
+	/* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+	u32 host_acknowledges;
+
+	/* (INT_STS_ND & INT_TRIG_PM_PCI) */
+	u32 pci_pm;
+
+	/* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+	u32 wakeups;
+
+	/* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+	u32 low_rssi;
+} __attribute__ ((packed));
+
+struct acx_wep_statistics {
+	/* WEP address keys configured */
+	u32 addr_key_count;
+
+	/* default keys configured */
+	u32 default_key_count;
+
+	u32 reserved;
+
+	/* number of times that WEP key not found on lookup */
+	u32 key_not_found;
+
+	/* number of times that WEP key decryption failed */
+	u32 decrypt_fail;
+
+	/* WEP packets decrypted */
+	u32 packets;
+
+	/* WEP decrypt interrupts */
+	u32 interrupt;
+} __attribute__ ((packed));
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+	/* the amount of enters into power save mode (both PD & ELP) */
+	u32 ps_enter;
+
+	/* the amount of enters into ELP mode */
+	u32 elp_enter;
+
+	/* the amount of missing beacon interrupts to the host */
+	u32 missing_bcns;
+
+	/* the amount of wake on host-access times */
+	u32 wake_on_host;
+
+	/* the amount of wake on timer-expire */
+	u32 wake_on_timer_exp;
+
+	/* the number of packets that were transmitted with PS bit set */
+	u32 tx_with_ps;
+
+	/* the number of packets that were transmitted with PS bit clear */
+	u32 tx_without_ps;
+
+	/* the number of received beacons */
+	u32 rcvd_beacons;
+
+	/* the number of entering into PowerOn (power save off) */
+	u32 power_save_off;
+
+	/* the number of entries into power save mode */
+	u16 enable_ps;
+
+	/*
+	 * the number of exits from power save, not including failed PS
+	 * transitions
+	 */
+	u16 disable_ps;
+
+	/*
+	 * the number of times the TSF counter was adjusted because
+	 * of drift
+	 */
+	u32 fix_tsf_ps;
+
+	/* Gives statistics about the spread continuous missed beacons.
+	 * The 16 LSB are dedicated for the PS mode.
+	 * The 16 MSB are dedicated for the PS mode.
+	 * cont_miss_bcns_spread[0] - single missed beacon.
+	 * cont_miss_bcns_spread[1] - two continuous missed beacons.
+	 * cont_miss_bcns_spread[2] - three continuous missed beacons.
+	 * ...
+	 * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+	*/
+	u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+	/* the number of beacons in awake mode */
+	u32 rcvd_awake_beacons;
+} __attribute__ ((packed));
+
+struct acx_mic_statistics {
+	u32 rx_pkts;
+	u32 calc_failure;
+} __attribute__ ((packed));
+
+struct acx_aes_statistics {
+	u32 encrypt_fail;
+	u32 decrypt_fail;
+	u32 encrypt_packets;
+	u32 decrypt_packets;
+	u32 encrypt_interrupt;
+	u32 decrypt_interrupt;
+} __attribute__ ((packed));
+
+struct acx_event_statistics {
+	u32 heart_beat;
+	u32 calibration;
+	u32 rx_mismatch;
+	u32 rx_mem_empty;
+	u32 rx_pool;
+	u32 oom_late;
+	u32 phy_transmit_error;
+	u32 tx_stuck;
+} __attribute__ ((packed));
+
+struct acx_ps_statistics {
+	u32 pspoll_timeouts;
+	u32 upsd_timeouts;
+	u32 upsd_max_sptime;
+	u32 upsd_max_apturn;
+	u32 pspoll_max_apturn;
+	u32 pspoll_utilization;
+	u32 upsd_utilization;
+} __attribute__ ((packed));
+
+struct acx_rxpipe_statistics {
+	u32 rx_prep_beacon_drop;
+	u32 descr_host_int_trig_rx_data;
+	u32 beacon_buffer_thres_host_int_trig_rx_data;
+	u32 missed_beacon_host_int_trig_rx_data;
+	u32 tx_xfr_host_int_trig_rx_data;
+} __attribute__ ((packed));
+
+struct acx_statistics {
+	struct acx_header header;
+
+	struct acx_tx_statistics tx;
+	struct acx_rx_statistics rx;
+	struct acx_dma_statistics dma;
+	struct acx_isr_statistics isr;
+	struct acx_wep_statistics wep;
+	struct acx_pwr_statistics pwr;
+	struct acx_aes_statistics aes;
+	struct acx_mic_statistics mic;
+	struct acx_event_statistics event;
+	struct acx_ps_statistics ps;
+	struct acx_rxpipe_statistics rxpipe;
+} __attribute__ ((packed));
+
+enum {
+	ACX_WAKE_UP_CONDITIONS      = 0x0002,
+	ACX_MEM_CFG                 = 0x0003,
+	ACX_SLOT                    = 0x0004,
+	ACX_QUEUE_HEAD              = 0x0005, /* for MASTER mode only */
+	ACX_AC_CFG                  = 0x0007,
+	ACX_MEM_MAP                 = 0x0008,
+	ACX_AID                     = 0x000A,
+	ACX_RADIO_PARAM             = 0x000B, /* Not used */
+	ACX_CFG                     = 0x000C, /* Not used */
+	ACX_FW_REV                  = 0x000D,
+	ACX_MEDIUM_USAGE            = 0x000F,
+	ACX_RX_CFG                  = 0x0010,
+	ACX_TX_QUEUE_CFG            = 0x0011, /* FIXME: only used by wl1251 */
+	ACX_BSS_IN_PS               = 0x0012, /* for AP only */
+	ACX_STATISTICS              = 0x0013, /* Debug API */
+	ACX_FEATURE_CFG             = 0x0015,
+	ACX_MISC_CFG                = 0x0017, /* Not used */
+	ACX_TID_CFG                 = 0x001A,
+	ACX_BEACON_FILTER_OPT       = 0x001F,
+	ACX_LOW_RSSI                = 0x0020,
+	ACX_NOISE_HIST              = 0x0021,
+	ACX_HDK_VERSION             = 0x0022, /* ??? */
+	ACX_PD_THRESHOLD            = 0x0023,
+	ACX_DATA_PATH_PARAMS        = 0x0024, /* WO */
+	ACX_DATA_PATH_RESP_PARAMS   = 0x0024, /* RO */
+	ACX_CCA_THRESHOLD           = 0x0025,
+	ACX_EVENT_MBOX_MASK         = 0x0026,
+#ifdef FW_RUNNING_AS_AP
+	ACX_DTIM_PERIOD             = 0x0027, /* for AP only */
+#else
+	ACX_WR_TBTT_AND_DTIM        = 0x0027, /* STA only */
+#endif
+	ACX_ACI_OPTION_CFG          = 0x0029, /* OBSOLETE (for 1251)*/
+	ACX_GPIO_CFG                = 0x002A, /* Not used */
+	ACX_GPIO_SET                = 0x002B, /* Not used */
+	ACX_PM_CFG                  = 0x002C, /* To Be Documented */
+	ACX_CONN_MONIT_PARAMS       = 0x002D,
+	ACX_AVERAGE_RSSI            = 0x002E, /* Not used */
+	ACX_CONS_TX_FAILURE         = 0x002F,
+	ACX_BCN_DTIM_OPTIONS        = 0x0031,
+	ACX_SG_ENABLE               = 0x0032,
+	ACX_SG_CFG                  = 0x0033,
+	ACX_ANTENNA_DIVERSITY_CFG   = 0x0035, /* To Be Documented */
+	ACX_LOW_SNR		    = 0x0037, /* To Be Documented */
+	ACX_BEACON_FILTER_TABLE     = 0x0038,
+	ACX_ARP_IP_FILTER           = 0x0039,
+	ACX_ROAMING_STATISTICS_TBL  = 0x003B,
+	ACX_RATE_POLICY             = 0x003D,
+	ACX_CTS_PROTECTION          = 0x003E,
+	ACX_SLEEP_AUTH              = 0x003F,
+	ACX_PREAMBLE_TYPE	    = 0x0040,
+	ACX_ERROR_CNT               = 0x0041,
+	ACX_FW_GEN_FRAME_RATES      = 0x0042,
+	ACX_IBSS_FILTER		    = 0x0044,
+	ACX_SERVICE_PERIOD_TIMEOUT  = 0x0045,
+	ACX_TSF_INFO                = 0x0046,
+	ACX_CONFIG_PS_WMM           = 0x0049,
+	ACX_ENABLE_RX_DATA_FILTER   = 0x004A,
+	ACX_SET_RX_DATA_FILTER      = 0x004B,
+	ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+	ACX_POWER_LEVEL_TABLE       = 0x004D,
+	ACX_BET_ENABLE              = 0x0050,
+	DOT11_STATION_ID            = 0x1001,
+	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
+	DOT11_CUR_TX_PWR            = 0x100D,
+	DOT11_DEFAULT_KEY           = 0x1010,
+	DOT11_RX_DOT11_MODE         = 0x1012,
+	DOT11_RTS_THRESHOLD         = 0x1013,
+	DOT11_GROUP_ADDRESS_TBL     = 0x1014,
+
+	MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+	MAX_IE = 0xFFFF
+};
+
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+			   u8 mgt_rate, u8 mgt_mod);
+int wl12xx_acx_station_id(struct wl12xx *wl);
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id);
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval);
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth);
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len);
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power);
+int wl12xx_acx_feature_cfg(struct wl12xx *wl);
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len);
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+				struct acx_data_path_params_resp *data_path);
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time);
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_acx_pd_threshold(struct wl12xx *wl);
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time);
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl);
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl);
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold);
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl);
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl);
+int wl12xx_acx_sg_enable(struct wl12xx *wl);
+int wl12xx_acx_sg_cfg(struct wl12xx *wl);
+int wl12xx_acx_cca_threshold(struct wl12xx *wl);
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl);
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid);
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask);
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble);
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+			    enum acx_ctsprotect_type ctsprotect);
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats);
+
+#endif /* __WL12XX_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
new file mode 100644
index 00000000000..48ac08c429b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -0,0 +1,295 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+
+#include "reg.h"
+#include "boot.h"
+#include "spi.h"
+#include "event.h"
+
+static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
+{
+	enable_irq(wl->irq);
+}
+
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
+{
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+	wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl)
+{
+	unsigned long timeout;
+	u32 boot_data;
+
+	/* perform soft reset */
+	wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+	/* SOFT_RESET is self clearing */
+	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+	while (1) {
+		boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			/* 1.2 check pWhalBus->uSelfClearTime if the
+			 * timeout was reached */
+			wl12xx_error("soft reset timeout");
+			return -1;
+		}
+
+		udelay(SOFT_RESET_STALL_TIME);
+	}
+
+	/* disable Rx/Tx */
+	wl12xx_reg_write32(wl, ENABLE, 0x0);
+
+	/* disable auto calibration on start*/
+	wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
+
+	return 0;
+}
+
+int wl12xx_boot_init_seq(struct wl12xx *wl)
+{
+	u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
+
+	/*
+	 * col #1: INTEGER_DIVIDER
+	 * col #2: FRACTIONAL_DIVIDER
+	 * col #3: ATTN_BB
+	 * col #4: ALPHA_BB
+	 * col #5: STOP_TIME_BB
+	 * col #6: BB_PLL_LOOP_FILTER
+	 */
+	static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
+
+		{   83, 87381,  0xB, 5, 0xF00,  3}, /* REF_FREQ_19_2*/
+		{   61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
+		{   41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
+		{   40, 0,      0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
+		{   47, 162280, 0xC, 6, 0x2760, 1}  /* REF_FREQ_33_6        */
+	};
+
+	/* read NVS params */
+	scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
+	wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+
+	/* read ELP_CMD */
+	elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
+	wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+
+	/* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
+	ref_freq = scr_pad6 & 0x000000FF;
+	wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+
+	wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
+
+	/*
+	 * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
+	 */
+	wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
+
+	/*
+	 * set the clock detect feature to work in the restart wu procedure
+	 * (ELP_CFG_MODE[14]) and Select the clock source type
+	 * (ELP_CFG_MODE[13:12])
+	 */
+	tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
+	wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
+
+	/* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
+	elp_cmd |= 0x00000040;
+	wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
+
+	/* PG 1.2: Set the BB PLL stable time to be 1000usec
+	 * (PLL_STABLE_TIME) */
+	wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+
+	/* PG 1.2: read clock request time */
+	init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
+
+	/*
+	 * PG 1.2: set the clock request time to be ref_clk_settling_time -
+	 * 1ms = 4ms
+	 */
+	if (init_data > 0x21)
+		tmp = init_data - 0x21;
+	else
+		tmp = 0;
+	wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
+
+	/* set BB PLL configurations in RF AFE */
+	wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
+
+	/* set RF_AFE_REG_5 */
+	wl12xx_reg_write32(wl, 0x003058d4, 0x50);
+
+	/* set RF_AFE_CTRL_REG_2 */
+	wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
+
+	/*
+	 * change RF PLL and BB PLL divider for VCO clock and adjust VCO
+	 * bais current(RF_AFE_REG_13)
+	 */
+	wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
+
+	/* set BB PLL configurations */
+	tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
+	wl12xx_reg_write32(wl, 0x00305840, tmp);
+
+	/* set fractional divider according to Appendix C-BB PLL
+	 * Calculations
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
+	wl12xx_reg_write32(wl, 0x00305844, tmp);
+
+	/* set the initial data for the sigma delta */
+	wl12xx_reg_write32(wl, 0x00305848, 0x3039);
+
+	/*
+	 * set the accumulator attenuation value, calibration loop1
+	 * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
+	 * the VCO gain
+	 */
+	tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
+		(LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
+	wl12xx_reg_write32(wl, 0x00305854, tmp);
+
+	/*
+	 * set the calibration stop time after holdoff time expires and set
+	 * settling time HOLD_OFF_TIME_BB
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
+	wl12xx_reg_write32(wl, 0x00305858, tmp);
+
+	/*
+	 * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
+	 * constant leakage current to linearize PFD to 0uA -
+	 * BB_ILOOPF[7:3]
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
+	wl12xx_reg_write32(wl, 0x003058f8, tmp);
+
+	/*
+	 * set regulator output voltage for n divider to
+	 * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
+	 * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
+	 * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
+	 */
+	wl12xx_reg_write32(wl, 0x003058f0, 0x29);
+
+	/* enable restart wakeup sequence (ELP_CMD[0]) */
+	wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+
+	/* restart sequence completed */
+	udelay(2000);
+
+	return 0;
+}
+
+int wl12xx_boot_run_firmware(struct wl12xx *wl)
+{
+	int loop, ret;
+	u32 chip_id, interrupt;
+
+	wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+	chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+	wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+	if (chip_id != wl->chip.id) {
+		wl12xx_error("chip id doesn't match after firmware boot");
+		return -EIO;
+	}
+
+	/* wait for init to complete */
+	loop = 0;
+	while (loop++ < INIT_LOOP) {
+		udelay(INIT_LOOP_DELAY);
+		interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+		if (interrupt == 0xffffffff) {
+			wl12xx_error("error reading hardware complete "
+				     "init indication");
+			return -EIO;
+		}
+		/* check that ACX_INTR_INIT_COMPLETE is enabled */
+		else if (interrupt & wl->chip.intr_init_complete) {
+			wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+					   wl->chip.intr_init_complete);
+			break;
+		}
+	}
+
+	if (loop >= INIT_LOOP) {
+		wl12xx_error("timeout waiting for the hardware to "
+			     "complete initialization");
+		return -EIO;
+	}
+
+	/* get hardware config command mail box */
+	wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+	/* get hardware config event mail box */
+	wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+	/* set the working partition to its "running" mode offset */
+	wl12xx_set_partition(wl,
+			     wl->chip.p_table[PART_WORK].mem.start,
+			     wl->chip.p_table[PART_WORK].mem.size,
+			     wl->chip.p_table[PART_WORK].reg.start,
+			     wl->chip.p_table[PART_WORK].reg.size);
+
+	wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+		     wl->cmd_box_addr, wl->event_box_addr);
+
+	/*
+	 * in case of full asynchronous mode the firmware event must be
+	 * ready to receive event from the command mailbox
+	 */
+
+	/* enable gpio interrupts */
+	wl12xx_boot_enable_interrupts(wl);
+
+	wl->chip.op_target_enable_interrupts(wl);
+
+	/* unmask all mbox events  */
+	wl->event_mask = 0xffffffff;
+
+	ret = wl12xx_event_unmask(wl);
+	if (ret < 0) {
+		wl12xx_error("EVENT mask setting failed");
+		return ret;
+	}
+
+	wl12xx_event_mbox_config(wl);
+
+	/* firmware startup completed */
+	return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
new file mode 100644
index 00000000000..4fa73132baa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl);
+int wl12xx_boot_init_seq(struct wl12xx *wl);
+int wl12xx_boot_run_firmware(struct wl12xx *wl);
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl);
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
new file mode 100644
index 00000000000..f73ab602b7a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -0,0 +1,353 @@
+#include "cmd.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len)
+{
+	struct wl12xx_command cmd;
+	unsigned long timeout;
+	size_t cmd_len;
+	u32 intr;
+	int ret = 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.id = type;
+	cmd.status = 0;
+	memcpy(cmd.parameters, buf, buf_len);
+	cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN;
+
+	wl12xx_ps_elp_wakeup(wl);
+
+	wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len);
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT);
+
+	intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	while (!(intr & wl->chip.intr_cmd_complete)) {
+		if (time_after(jiffies, timeout)) {
+			wl12xx_error("command complete timeout");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		msleep(1);
+
+		intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	}
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			   wl->chip.intr_cmd_complete);
+
+out:
+	wl12xx_ps_elp_sleep(wl);
+
+	return ret;
+}
+
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer)
+{
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd test");
+
+	ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len);
+	if (ret < 0) {
+		wl12xx_warning("TEST command failed");
+		return ret;
+	}
+
+	if (answer) {
+		struct wl12xx_command *cmd_answer;
+
+		/*
+		 * The test command got in, we can read the answer.
+		 * The answer would be a wl12xx_command, where the
+		 * parameter array contains the actual answer.
+		 */
+
+		wl12xx_ps_elp_wakeup(wl);
+
+		wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+		wl12xx_ps_elp_sleep(wl);
+
+		cmd_answer = buf;
+		if (cmd_answer->status != CMD_STATUS_SUCCESS)
+			wl12xx_error("TEST command answer error: %d",
+				     cmd_answer->status);
+	}
+
+	return 0;
+}
+
+
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+			   void *answer)
+{
+	struct wl12xx_command *cmd;
+	struct acx_header header;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd interrogate");
+
+	header.id = ie_id;
+	header.len = ie_len - sizeof(header);
+
+	ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header));
+	if (ret < 0) {
+		wl12xx_error("INTERROGATE command failed");
+		return ret;
+	}
+
+	wl12xx_ps_elp_wakeup(wl);
+
+	/* the interrogate command got in, we can read the answer */
+	wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer,
+			    CMDMBOX_HEADER_LEN + ie_len);
+
+	wl12xx_ps_elp_sleep(wl);
+
+	cmd = answer;
+	if (cmd->status != CMD_STATUS_SUCCESS)
+		wl12xx_error("INTERROGATE command error: %d",
+			     cmd->status);
+
+	return 0;
+
+}
+
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len)
+{
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd configure");
+
+	ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie,
+			      ie_len);
+	if (ret < 0) {
+		wl12xx_warning("CONFIGURE command NOK");
+		return ret;
+	}
+
+	return 0;
+
+}
+
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+	struct vbm_update_request vbm;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd vbm");
+
+	/* Count and period will be filled by the target */
+	vbm.tim.bitmap_ctrl = bitmap_control;
+	if (bitmap_len > PARTIAL_VBM_MAX) {
+		wl12xx_warning("cmd vbm len is %d B, truncating to %d",
+			       bitmap_len, PARTIAL_VBM_MAX);
+		bitmap_len = PARTIAL_VBM_MAX;
+	}
+	memcpy(vbm.tim.pvb_field, bitmap, bitmap_len);
+	vbm.tim.identity = identity;
+	vbm.tim.length = bitmap_len + 3;
+
+	vbm.len = cpu_to_le16(bitmap_len + 5);
+
+	ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm));
+	if (ret < 0) {
+		wl12xx_error("VBM command failed");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable)
+{
+	int ret;
+	u16 cmd_rx, cmd_tx;
+
+	wl12xx_debug(DEBUG_CMD, "cmd data path");
+
+	if (enable) {
+		cmd_rx = CMD_ENABLE_RX;
+		cmd_tx = CMD_ENABLE_TX;
+	} else {
+		cmd_rx = CMD_DISABLE_RX;
+		cmd_tx = CMD_DISABLE_TX;
+	}
+
+	ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel));
+	if (ret < 0) {
+		wl12xx_error("rx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		return ret;
+	}
+
+	wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel));
+	if (ret < 0) {
+		wl12xx_error("tx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		return ret;
+	}
+
+	wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	return 0;
+}
+
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+		    u16 beacon_interval, u8 wait)
+{
+	unsigned long timeout;
+	struct cmd_join join = {};
+	int ret, i;
+	u8 *bssid;
+
+	/* FIXME: this should be in main.c */
+	ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+				     DEFAULT_HW_GEN_MODULATION_TYPE,
+				     wl->tx_mgmt_frm_rate,
+				     wl->tx_mgmt_frm_mod);
+	if (ret < 0)
+		return ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd join");
+
+	/* Reverse order BSSID */
+	bssid = (u8 *)&join.bssid_lsb;
+	for (i = 0; i < ETH_ALEN; i++)
+		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+	join.rx_config_options = wl->rx_config;
+	join.rx_filter_options = wl->rx_filter;
+
+	join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+	join.beacon_interval = beacon_interval;
+	join.dtim_interval = dtim_interval;
+	join.bss_type = bss_type;
+	join.channel = wl->channel;
+	join.ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+	ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join));
+	if (ret < 0) {
+		wl12xx_error("failed to initiate cmd join");
+		return ret;
+	}
+
+	timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+
+	/*
+	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
+	 * simplify locking we just sleep instead, for now
+	 */
+	if (wait)
+		msleep(10);
+
+	return 0;
+}
+
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode)
+{
+	int ret;
+	struct acx_ps_params ps_params;
+
+	/* FIXME: this should be in ps.c */
+	ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int);
+	if (ret < 0) {
+		wl12xx_error("Couldnt set wake up conditions");
+		return ret;
+	}
+
+	wl12xx_debug(DEBUG_CMD, "cmd set ps mode");
+
+	ps_params.ps_mode = ps_mode;
+	ps_params.send_null_data = 1;
+	ps_params.retries = 5;
+	ps_params.hang_over_period = 128;
+	ps_params.null_data_rate = 1; /* 1 Mbps */
+
+	ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params,
+			      sizeof(ps_params));
+	if (ret < 0) {
+		wl12xx_error("cmd set_ps_mode failed");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer)
+{
+	struct cmd_read_write_memory mem_cmd, *mem_answer;
+	struct wl12xx_command cmd;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd read memory");
+
+	memset(&mem_cmd, 0, sizeof(mem_cmd));
+	mem_cmd.addr = addr;
+	mem_cmd.size = len;
+
+	ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd));
+	if (ret < 0) {
+		wl12xx_error("read memory command failed: %d", ret);
+		return ret;
+	}
+
+	/* the read command got in, we can now read the answer */
+	wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd,
+			    CMDMBOX_HEADER_LEN + sizeof(mem_cmd));
+
+	if (cmd.status != CMD_STATUS_SUCCESS)
+		wl12xx_error("error in read command result: %d", cmd.status);
+
+	mem_answer = (struct cmd_read_write_memory *) cmd.parameters;
+	memcpy(answer, mem_answer->value, len);
+
+	return 0;
+}
+
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+			    void *buf, size_t buf_len)
+{
+	struct wl12xx_cmd_packet_template template;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+	memset(&template, 0, sizeof(template));
+
+	WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE);
+	buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE);
+	template.size = cpu_to_le16(buf_len);
+
+	if (buf)
+		memcpy(template.template, buf, buf_len);
+
+	ret = wl12xx_cmd_send(wl, cmd_id, &template,
+			      sizeof(template.size) + buf_len);
+	if (ret < 0) {
+		wl12xx_warning("cmd set_template failed: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
new file mode 100644
index 00000000000..aa307dcd081
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -0,0 +1,265 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CMD_H__
+#define __WL12XX_CMD_H__
+
+#include "wl12xx.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len);
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer);
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+			   void *answer);
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len);
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control);
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable);
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+		    u16 beacon_interval, u8 wait);
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer);
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+			    void *buf, size_t buf_len);
+
+/* unit ms */
+#define WL12XX_COMMAND_TIMEOUT 2000
+
+#define WL12XX_MAX_TEMPLATE_SIZE 300
+
+struct wl12xx_cmd_packet_template {
+	__le16 size;
+	u8 template[WL12XX_MAX_TEMPLATE_SIZE];
+} __attribute__ ((packed));
+
+enum wl12xx_commands {
+	CMD_RESET           = 0,
+	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
+	CMD_CONFIGURE       = 2,    /*use this to write information elements*/
+	CMD_ENABLE_RX       = 3,
+	CMD_ENABLE_TX       = 4,
+	CMD_DISABLE_RX      = 5,
+	CMD_DISABLE_TX      = 6,
+	CMD_SCAN            = 8,
+	CMD_STOP_SCAN       = 9,
+	CMD_VBM             = 10,
+	CMD_START_JOIN      = 11,
+	CMD_SET_KEYS        = 12,
+	CMD_READ_MEMORY     = 13,
+	CMD_WRITE_MEMORY    = 14,
+	CMD_BEACON          = 19,
+	CMD_PROBE_RESP      = 20,
+	CMD_NULL_DATA       = 21,
+	CMD_PROBE_REQ       = 22,
+	CMD_TEST            = 23,
+	CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */
+	CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */
+	CMD_NOISE_HIST      = 28,
+	CMD_RX_RESET        = 29,
+	CMD_PS_POLL         = 30,
+	CMD_QOS_NULL_DATA   = 31,
+	CMD_LNA_CONTROL     = 32,
+	CMD_SET_BCN_MODE    = 33,
+	CMD_MEASUREMENT      = 34,
+	CMD_STOP_MEASUREMENT = 35,
+	CMD_DISCONNECT       = 36,
+	CMD_SET_PS_MODE      = 37,
+	CMD_CHANNEL_SWITCH   = 38,
+	CMD_STOP_CHANNEL_SWICTH = 39,
+	CMD_AP_DISCOVERY     = 40,
+	CMD_STOP_AP_DISCOVERY = 41,
+	CMD_SPS_SCAN = 42,
+	CMD_STOP_SPS_SCAN = 43,
+	CMD_HEALTH_CHECK     = 45,
+	CMD_DEBUG            = 46,
+	CMD_TRIGGER_SCAN_TO  = 47,
+
+	NUM_COMMANDS,
+	MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+struct  wl12xx_command {
+	u16 id;
+	u16 status;
+	u8  parameters[MAX_CMD_PARAMS];
+};
+
+enum {
+	CMD_MAILBOX_IDLE              		=  0,
+	CMD_STATUS_SUCCESS            		=  1,
+	CMD_STATUS_UNKNOWN_CMD        		=  2,
+	CMD_STATUS_UNKNOWN_IE         		=  3,
+	CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11,
+	CMD_STATUS_RX_BUSY            		= 13,
+	CMD_STATUS_INVALID_PARAM      		= 14,
+	CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15,
+	CMD_STATUS_OUT_OF_MEMORY      		= 16,
+	CMD_STATUS_STA_TABLE_FULL     		= 17,
+	CMD_STATUS_RADIO_ERROR        		= 18,
+	CMD_STATUS_WRONG_NESTING      		= 19,
+	CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/
+	CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/
+	MAX_COMMAND_STATUS            		= 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+	/* The address of the memory to read from or write to.*/
+	u32 addr;
+
+	/* The amount of data in bytes to read from or write to the WiLink
+	 * device.*/
+	u32 size;
+
+	/* The actual value read from or written to the Wilink. The source
+	   of this field is the Host in WRITE command or the Wilink in READ
+	   command. */
+	u8 value[MAX_READ_SIZE];
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+
+struct basic_scan_parameters {
+	u32 rx_config_options;
+	u32 rx_filter_options;
+
+	/*
+	 * Scan options:
+	 * bit 0: When this bit is set, passive scan.
+	 * bit 1: Band, when this bit is set we scan
+	 * in the 5Ghz band.
+	 * bit 2: voice mode, 0 for normal scan.
+	 * bit 3: scan priority, 1 for high priority.
+	 */
+	u16 scan_options;
+
+	/* Number of channels to scan */
+	u8 num_channels;
+
+	/* Number opf probe requests to send, per channel */
+	u8 num_probe_requests;
+
+	/* Rate and modulation for probe requests */
+	u16 tx_rate;
+
+	u8 tid_trigger;
+	u8 ssid_len;
+	u32 ssid[8];
+
+} __attribute__ ((packed));
+
+struct basic_scan_channel_parameters {
+	u32 min_duration; /* in TU */
+	u32 max_duration; /* in TU */
+	u32 bssid_lsb;
+	u16 bssid_msb;
+
+	/*
+	 * bits 0-3: Early termination count.
+	 * bits 4-5: Early termination condition.
+	 */
+	u8 early_termination;
+
+	u8 tx_power_att;
+	u8 channel;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+/* SCAN parameters */
+#define SCAN_MAX_NUM_OF_CHANNELS 16
+
+struct cmd_scan {
+	struct basic_scan_parameters params;
+	struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+} __attribute__ ((packed));
+
+enum {
+	BSS_TYPE_IBSS = 0,
+	BSS_TYPE_STA_BSS = 2,
+	BSS_TYPE_AP_BSS = 3,
+	MAX_BSS_TYPE = 0xFF
+};
+
+#define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */
+#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */
+
+
+struct cmd_join {
+	u32 bssid_lsb;
+	u16 bssid_msb;
+	u16 beacon_interval; /* in TBTTs */
+	u32 rx_config_options;
+	u32 rx_filter_options;
+
+	/*
+	 * The target uses this field to determine the rate at
+	 * which to transmit control frame responses (such as
+	 * ACK or CTS frames).
+	 */
+	u16 basic_rate_set;
+	u8 dtim_interval;
+	u8 tx_ctrl_frame_rate; /* OBSOLETE */
+	u8 tx_ctrl_frame_mod;  /* OBSOLETE */
+	/*
+	 * bits 0-2: This bitwise field specifies the type
+	 * of BSS to start or join (BSS_TYPE_*).
+	 * bit 4: Band - The radio band in which to join
+	 * or start.
+	 *  0 - 2.4GHz band
+	 *  1 - 5GHz band
+	 * bits 3, 5-7: Reserved
+	 */
+	u8 bss_type;
+	u8 channel;
+	u8 ssid_len;
+	u8 ssid[IW_ESSID_MAX_SIZE];
+	u8 ctrl; /* JOIN_CMD_CTRL_* */
+	u8 tx_mgt_frame_rate; /* OBSOLETE */
+	u8 tx_mgt_frame_mod;  /* OBSOLETE */
+	u8 reserved;
+} __attribute__ ((packed));
+
+
+#endif /* __WL12XX_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
new file mode 100644
index 00000000000..cdb368ce4da
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -0,0 +1,508 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "debugfs.h"
+
+#include <linux/skbuff.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+/* ms */
+#define WL12XX_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
+static ssize_t name## _read(struct file *file, char __user *userbuf,	\
+			    size_t count, loff_t *ppos)			\
+{									\
+	struct wl12xx *wl = file->private_data;				\
+	char buf[buflen];						\
+	int res;							\
+									\
+	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations name## _ops = {			\
+	.read = name## _read,						\
+	.open = wl12xx_open_file_generic,				\
+};
+
+#define DEBUGFS_ADD(name, parent)					\
+	wl->debugfs.name = debugfs_create_file(#name, 0400, parent,	\
+					       wl, &name## _ops);	\
+	if (IS_ERR(wl->debugfs.name)) {					\
+		ret = PTR_ERR(wl->debugfs.name);			\
+		wl->debugfs.name = NULL;				\
+		goto out;						\
+	}
+
+#define DEBUGFS_DEL(name)						\
+	do {								\
+		debugfs_remove(wl->debugfs.name);			\
+		wl->debugfs.name = NULL;				\
+	} while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt)			\
+static ssize_t sub## _ ##name## _read(struct file *file,		\
+				      char __user *userbuf,		\
+				      size_t count, loff_t *ppos)	\
+{									\
+	struct wl12xx *wl = file->private_data;				\
+	char buf[buflen];						\
+	int res;							\
+									\
+	wl12xx_debugfs_update_stats(wl);				\
+									\
+	res = scnprintf(buf, buflen, fmt "\n",				\
+			wl->stats.fw_stats->sub.name);			\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations sub## _ ##name## _ops = {		\
+	.read = sub## _ ##name## _read,					\
+	.open = wl12xx_open_file_generic,				\
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name)				\
+	DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name)				\
+	DEBUGFS_DEL(sub## _ ##name)
+
+static void wl12xx_debugfs_update_stats(struct wl12xx *wl)
+{
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL12XX_STATE_ON &&
+	    time_after(jiffies, wl->stats.fw_stats_update +
+		       msecs_to_jiffies(WL12XX_DEBUGFS_STATS_LIFETIME))) {
+		wl12xx_acx_statistics(wl, wl->stats.fw_stats);
+		wl->stats.fw_stats_update = jiffies;
+	}
+
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+		     20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+		      wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	struct wl12xx *wl = file->private_data;
+	u32 queue_len;
+	char buf[20];
+	int res;
+
+	queue_len = skb_queue_len(&wl->tx_queue);
+
+	res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+	.read = tx_queue_len_read,
+	.open = wl12xx_open_file_generic,
+};
+
+static void wl12xx_debugfs_delete_files(struct wl12xx *wl)
+{
+	DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+	DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+	DEBUGFS_FWSTATS_DEL(rx, dropped);
+	DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+	DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_DEL(rx, path_reset);
+	DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+	DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+	DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+	DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_DEL(isr, fiqs);
+	DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+	DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+	DEBUGFS_FWSTATS_DEL(isr, irqs);
+	DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+	DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+	DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+	DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+	DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_DEL(isr, commands);
+	DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+	DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+	DEBUGFS_FWSTATS_DEL(isr, wakeups);
+	DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+	DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+	DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_DEL(wep, packets);
+	DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+	DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+	DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+	DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+	DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+	DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_DEL(event, heart_beat);
+	DEBUGFS_FWSTATS_DEL(event, calibration);
+	DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+	DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_DEL(event, rx_pool);
+	DEBUGFS_FWSTATS_DEL(event, oom_late);
+	DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_DEL(tx_queue_len);
+	DEBUGFS_DEL(retry_count);
+	DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl12xx_debugfs_add_files(struct wl12xx *wl)
+{
+	int ret = 0;
+
+	DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+	DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+	DEBUGFS_FWSTATS_ADD(rx, dropped);
+	DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+	DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_ADD(rx, path_reset);
+	DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+	DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_ADD(isr, fiqs);
+	DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+	DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+	DEBUGFS_FWSTATS_ADD(isr, irqs);
+	DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+	DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_ADD(isr, commands);
+	DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+	DEBUGFS_FWSTATS_ADD(isr, wakeups);
+	DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+	DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+	DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(wep, packets);
+	DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+	DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+	DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+	DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_ADD(event, heart_beat);
+	DEBUGFS_FWSTATS_ADD(event, calibration);
+	DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+	DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_ADD(event, rx_pool);
+	DEBUGFS_FWSTATS_ADD(event, oom_late);
+	DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+	DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+	DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+	if (ret < 0)
+		wl12xx_debugfs_delete_files(wl);
+
+	return ret;
+}
+
+void wl12xx_debugfs_reset(struct wl12xx *wl)
+{
+	memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+	wl->stats.retry_count = 0;
+	wl->stats.excessive_retries = 0;
+}
+
+int wl12xx_debugfs_init(struct wl12xx *wl)
+{
+	int ret;
+
+	wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+	if (IS_ERR(wl->debugfs.rootdir)) {
+		ret = PTR_ERR(wl->debugfs.rootdir);
+		wl->debugfs.rootdir = NULL;
+		goto err;
+	}
+
+	wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+						       wl->debugfs.rootdir);
+
+	if (IS_ERR(wl->debugfs.fw_statistics)) {
+		ret = PTR_ERR(wl->debugfs.fw_statistics);
+		wl->debugfs.fw_statistics = NULL;
+		goto err_root;
+	}
+
+	wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+				      GFP_KERNEL);
+
+	if (!wl->stats.fw_stats) {
+		ret = -ENOMEM;
+		goto err_fw;
+	}
+
+	wl->stats.fw_stats_update = jiffies;
+
+	ret = wl12xx_debugfs_add_files(wl);
+
+	if (ret < 0)
+		goto err_file;
+
+	return 0;
+
+err_file:
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+err_fw:
+	debugfs_remove(wl->debugfs.fw_statistics);
+	wl->debugfs.fw_statistics = NULL;
+
+err_root:
+	debugfs_remove(wl->debugfs.rootdir);
+	wl->debugfs.rootdir = NULL;
+
+err:
+	return ret;
+}
+
+void wl12xx_debugfs_exit(struct wl12xx *wl)
+{
+	wl12xx_debugfs_delete_files(wl);
+
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+	debugfs_remove(wl->debugfs.fw_statistics);
+	wl->debugfs.fw_statistics = NULL;
+
+	debugfs_remove(wl->debugfs.rootdir);
+	wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h
new file mode 100644
index 00000000000..562cdcbcc87
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL12XX_DEBUGFS_H
+#define WL12XX_DEBUGFS_H
+
+#include "wl12xx.h"
+
+int wl12xx_debugfs_init(struct wl12xx *wl);
+void wl12xx_debugfs_exit(struct wl12xx *wl);
+void wl12xx_debugfs_reset(struct wl12xx *wl);
+
+#endif /* WL12XX_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
new file mode 100644
index 00000000000..99529ca89a7
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -0,0 +1,127 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "event.h"
+#include "ps.h"
+
+static int wl12xx_event_scan_complete(struct wl12xx *wl,
+				      struct event_mailbox *mbox)
+{
+	wl12xx_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
+		     mbox->scheduled_scan_status,
+		     mbox->scheduled_scan_channels);
+
+	if (wl->scanning) {
+		mutex_unlock(&wl->mutex);
+		ieee80211_scan_completed(wl->hw, false);
+		mutex_lock(&wl->mutex);
+		wl->scanning = false;
+	}
+
+	return 0;
+}
+
+static void wl12xx_event_mbox_dump(struct event_mailbox *mbox)
+{
+	wl12xx_debug(DEBUG_EVENT, "MBOX DUMP:");
+	wl12xx_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+	wl12xx_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl12xx_event_process(struct wl12xx *wl, struct event_mailbox *mbox)
+{
+	int ret;
+	u32 vector;
+
+	wl12xx_event_mbox_dump(mbox);
+
+	vector = mbox->events_vector & ~(mbox->events_mask);
+	wl12xx_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+	if (vector & SCAN_COMPLETE_EVENT_ID) {
+		ret = wl12xx_event_scan_complete(wl, mbox);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (vector & BSS_LOSE_EVENT_ID) {
+		wl12xx_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+		if (wl->psm_requested && wl->psm) {
+			ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+int wl12xx_event_unmask(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_event_mbox_mask(wl, ~(wl->event_mask));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void wl12xx_event_mbox_config(struct wl12xx *wl)
+{
+	wl->mbox_ptr[0] = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+	wl12xx_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox_num)
+{
+	struct event_mailbox mbox;
+	int ret;
+
+	wl12xx_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+	if (mbox_num > 1)
+		return -EINVAL;
+
+	/* first we read the mbox descriptor */
+	wl12xx_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+			    sizeof(struct event_mailbox));
+
+	/* process the descriptor */
+	ret = wl12xx_event_process(wl, &mbox);
+	if (ret < 0)
+		return ret;
+
+	/* then we let the firmware know it can go on...*/
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+	return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
new file mode 100644
index 00000000000..1f4c2f7438a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_EVENT_H__
+#define __WL12XX_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+	RESERVED1_EVENT_ID                       = BIT(0),
+	RESERVED2_EVENT_ID                       = BIT(1),
+	MEASUREMENT_START_EVENT_ID               = BIT(2),
+	SCAN_COMPLETE_EVENT_ID                   = BIT(3),
+	CALIBRATION_COMPLETE_EVENT_ID            = BIT(4),
+	ROAMING_TRIGGER_LOW_RSSI_EVENT_ID        = BIT(5),
+	PS_REPORT_EVENT_ID                       = BIT(6),
+	SYNCHRONIZATION_TIMEOUT_EVENT_ID         = BIT(7),
+	HEALTH_REPORT_EVENT_ID                   = BIT(8),
+	ACI_DETECTION_EVENT_ID                   = BIT(9),
+	DEBUG_REPORT_EVENT_ID                    = BIT(10),
+	MAC_STATUS_EVENT_ID                      = BIT(11),
+	DISCONNECT_EVENT_COMPLETE_ID             = BIT(12),
+	JOIN_EVENT_COMPLETE_ID                   = BIT(13),
+	CHANNEL_SWITCH_COMPLETE_EVENT_ID         = BIT(14),
+	BSS_LOSE_EVENT_ID                        = BIT(15),
+	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID    = BIT(16),
+	MEASUREMENT_COMPLETE_EVENT_ID            = BIT(17),
+	AP_DISCOVERY_COMPLETE_EVENT_ID           = BIT(18),
+	SCHEDULED_SCAN_COMPLETE_EVENT_ID         = BIT(19),
+	PSPOLL_DELIVERY_FAILURE_EVENT_ID 	 = BIT(20),
+	RESET_BSS_EVENT_ID                       = BIT(21),
+	REGAINED_BSS_EVENT_ID                    = BIT(22),
+	ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID   = BIT(23),
+	ROAMING_TRIGGER_LOW_SNR_EVENT_ID         = BIT(24),
+	ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID    = BIT(25),
+
+	DBG_EVENT_ID                             = BIT(26),
+	BT_PTA_SENSE_EVENT_ID                    = BIT(27),
+	BT_PTA_PREDICTION_EVENT_ID               = BIT(28),
+	BT_PTA_AVALANCHE_EVENT_ID                = BIT(29),
+
+	PLT_RX_CALIBRATION_COMPLETE_EVENT_ID     = BIT(30),
+
+	EVENT_MBOX_ALL_EVENT_ID                  = 0x7fffffff,
+};
+
+struct event_debug_report {
+	u8 debug_event_id;
+	u8 num_params;
+	u16 pad;
+	u32 report_1;
+	u32 report_2;
+	u32 report_3;
+} __attribute__ ((packed));
+
+struct event_mailbox {
+	u32 events_vector;
+	u32 events_mask;
+	u32 reserved_1;
+	u32 reserved_2;
+
+	char average_rssi_level;
+	u8 ps_status;
+	u8 channel_switch_status;
+	u8 scheduled_scan_status;
+
+	/* Channels scanned by the scheduled scan */
+	u16 scheduled_scan_channels;
+
+	/* If bit 0 is set -> target's fatal error */
+	u16 health_report;
+	u16 bad_fft_counter;
+	u8 bt_pta_sense_info;
+	u8 bt_pta_protective_info;
+	u32 reserved;
+	u32 debug_report[2];
+
+	/* Number of FCS errors since last event */
+	u32 fcs_err_counter;
+
+	struct event_debug_report report;
+	u8 average_snr_level;
+	u8 padding[19];
+} __attribute__ ((packed));
+
+int wl12xx_event_unmask(struct wl12xx *wl);
+void wl12xx_event_mbox_config(struct wl12xx *wl);
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
new file mode 100644
index 00000000000..2a573a6010b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "init.h"
+#include "wl12xx_80211.h"
+#include "acx.h"
+#include "cmd.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_feature_cfg(wl);
+	if (ret < 0) {
+		wl12xx_warning("couldn't set feature config");
+		return ret;
+	}
+
+	ret = wl12xx_acx_default_key(wl, wl->default_key);
+	if (ret < 0) {
+		wl12xx_warning("couldn't set default key");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_hw_init_templates_config(struct wl12xx *wl)
+{
+	int ret;
+	u8 partial_vbm[PARTIAL_VBM_MAX];
+
+	/* send empty templates for fw memory reservation */
+	ret = wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
+				      sizeof(struct wl12xx_probe_req_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_NULL_DATA, NULL,
+				      sizeof(struct wl12xx_null_data_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_PS_POLL, NULL,
+				      sizeof(struct wl12xx_ps_poll_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
+				      sizeof
+				      (struct wl12xx_qos_null_data_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
+				      sizeof
+				      (struct wl12xx_probe_resp_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_BEACON, NULL,
+				      sizeof
+				      (struct wl12xx_beacon_template));
+	if (ret < 0)
+		return ret;
+
+	/* tim templates, first reserve space then allocate an empty one */
+	memset(partial_vbm, 0, PARTIAL_VBM_MAX);
+	ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+	int ret;
+
+	ret = wl12xx_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_rx_config(wl, config, filter);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_phy_config(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_pd_threshold(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_slot(wl, DEFAULT_SLOT_TIME);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_group_address_tbl(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_service_period_timeout(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_beacon_filter_opt(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_beacon_filter_table(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_pta(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_sg_enable(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_sg_cfg(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_cca_threshold(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_bcn_dtim_options(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_power_auth(struct wl12xx *wl)
+{
+	return wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+}
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
new file mode 100644
index 00000000000..c8b6cd0b7c3
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_INIT_H__
+#define __WL12XX_INIT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl);
+int wl12xx_hw_init_templates_config(struct wl12xx *wl);
+int wl12xx_hw_init_mem_config(struct wl12xx *wl);
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_hw_init_phy_config(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl);
+int wl12xx_hw_init_pta(struct wl12xx *wl);
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl);
+int wl12xx_hw_init_power_auth(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
new file mode 100644
index 00000000000..603d6114882
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -0,0 +1,1358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/spi/wl12xx.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "wl1251.h"
+#include "spi.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+
+static void wl12xx_disable_interrupts(struct wl12xx *wl)
+{
+	disable_irq(wl->irq);
+}
+
+static void wl12xx_power_off(struct wl12xx *wl)
+{
+	wl->set_power(false);
+}
+
+static void wl12xx_power_on(struct wl12xx *wl)
+{
+	wl->set_power(true);
+}
+
+static irqreturn_t wl12xx_irq(int irq, void *cookie)
+{
+	struct wl12xx *wl;
+
+	wl12xx_debug(DEBUG_IRQ, "IRQ");
+
+	wl = cookie;
+
+	schedule_work(&wl->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int wl12xx_fetch_firmware(struct wl12xx *wl)
+{
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev);
+
+	if (ret < 0) {
+		wl12xx_error("could not get firmware: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl12xx_error("firmware size is not multiple of 32 bits: %zu",
+			     fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->fw_len = fw->size;
+	wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+
+	if (!wl->fw) {
+		wl12xx_error("could not allocate memory for the firmware");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->fw, fw->data, wl->fw_len);
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int wl12xx_fetch_nvs(struct wl12xx *wl)
+{
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev);
+
+	if (ret < 0) {
+		wl12xx_error("could not get nvs file: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl12xx_error("nvs size is not multiple of 32 bits: %zu",
+			     fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->nvs_len = fw->size;
+	wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+
+	if (!wl->nvs) {
+		wl12xx_error("could not allocate memory for the nvs file");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->nvs, fw->data, wl->nvs_len);
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static void wl12xx_fw_wakeup(struct wl12xx *wl)
+{
+	u32 elp_reg;
+
+	elp_reg = ELPCTRL_WAKE_UP;
+	wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+	if (!(elp_reg & ELPCTRL_WLAN_READY)) {
+		wl12xx_warning("WLAN not ready");
+		elp_reg = ELPCTRL_WAKE_UP_WLAN_READY;
+		wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	}
+}
+
+static int wl12xx_chip_wakeup(struct wl12xx *wl)
+{
+	int ret = 0;
+
+	wl12xx_power_on(wl);
+	msleep(wl->chip.power_on_sleep);
+	wl12xx_spi_reset(wl);
+	wl12xx_spi_init(wl);
+
+	/* We don't need a real memory partition here, because we only want
+	 * to use the registers at this point. */
+	wl12xx_set_partition(wl,
+			     0x00000000,
+			     0x00000000,
+			     REGISTERS_BASE,
+			     REGISTERS_DOWN_SIZE);
+
+	/* ELP module wake up */
+	wl12xx_fw_wakeup(wl);
+
+	/* whal_FwCtrl_BootSm() */
+
+	/* 0. read chip id from CHIP_ID */
+	wl->chip.id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+	/* 1. check if chip id is valid */
+
+	switch (wl->chip.id) {
+	case CHIP_ID_1251_PG12:
+		wl12xx_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
+			     wl->chip.id);
+
+		wl1251_setup(wl);
+
+		break;
+	case CHIP_ID_1271_PG10:
+	case CHIP_ID_1251_PG10:
+	case CHIP_ID_1251_PG11:
+	default:
+		wl12xx_error("unsupported chip id: 0x%x", wl->chip.id);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (wl->fw == NULL) {
+		ret = wl12xx_fetch_firmware(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+	/* No NVS from netlink, try to get it from the filesystem */
+	if (wl->nvs == NULL) {
+		ret = wl12xx_fetch_nvs(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void wl12xx_filter_work(struct work_struct *work)
+{
+	struct wl12xx *wl =
+		container_of(work, struct wl12xx, filter_work);
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL12XX_STATE_OFF)
+		goto out;
+
+	ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+	if (ret < 0)
+		goto out;
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+int wl12xx_plt_start(struct wl12xx *wl)
+{
+	int ret;
+
+	wl12xx_notice("power up");
+
+	if (wl->state != WL12XX_STATE_OFF) {
+		wl12xx_error("cannot go into PLT state because not "
+			     "in off state: %d", wl->state);
+		return -EBUSY;
+	}
+
+	wl->state = WL12XX_STATE_PLT;
+
+	ret = wl12xx_chip_wakeup(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl->chip.op_boot(wl);
+	if (ret < 0)
+		return ret;
+
+	wl12xx_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+
+	ret = wl->chip.op_plt_init(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_plt_stop(struct wl12xx *wl)
+{
+	wl12xx_notice("power down");
+
+	if (wl->state != WL12XX_STATE_PLT) {
+		wl12xx_error("cannot power down because not in PLT "
+			     "state: %d", wl->state);
+		return -EBUSY;
+	}
+
+	wl12xx_disable_interrupts(wl);
+	wl12xx_power_off(wl);
+
+	wl->state = WL12XX_STATE_OFF;
+
+	return 0;
+}
+
+
+static int wl12xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct wl12xx *wl = hw->priv;
+
+	skb_queue_tail(&wl->tx_queue, skb);
+
+	schedule_work(&wl->tx_work);
+
+	/*
+	 * The workqueue is slow to process the tx_queue and we need stop
+	 * the queue here, otherwise the queue will get too long.
+	 */
+	if (skb_queue_len(&wl->tx_queue) >= WL12XX_TX_QUEUE_MAX_LENGTH) {
+		ieee80211_stop_queues(wl->hw);
+
+		/*
+		 * FIXME: this is racy, the variable is not properly
+		 * protected. Maybe fix this by removing the stupid
+		 * variable altogether and checking the real queue state?
+		 */
+		wl->tx_queue_stopped = true;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static int wl12xx_op_start(struct ieee80211_hw *hw)
+{
+	struct wl12xx *wl = hw->priv;
+	int ret = 0;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 start");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state != WL12XX_STATE_OFF) {
+		wl12xx_error("cannot start because not in off state: %d",
+			     wl->state);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = wl12xx_chip_wakeup(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl->chip.op_boot(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl->chip.op_hw_init(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl12xx_acx_station_id(wl);
+	if (ret < 0)
+		goto out;
+
+	wl->state = WL12XX_STATE_ON;
+
+	wl12xx_info("firmware booted (%s)", wl->chip.fw_ver);
+
+out:
+	if (ret < 0)
+		wl12xx_power_off(wl);
+
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static void wl12xx_op_stop(struct ieee80211_hw *hw)
+{
+	struct wl12xx *wl = hw->priv;
+
+	wl12xx_info("down");
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 stop");
+
+	mutex_lock(&wl->mutex);
+
+	WARN_ON(wl->state != WL12XX_STATE_ON);
+
+	if (wl->scanning) {
+		mutex_unlock(&wl->mutex);
+		ieee80211_scan_completed(wl->hw, true);
+		mutex_lock(&wl->mutex);
+		wl->scanning = false;
+	}
+
+	wl->state = WL12XX_STATE_OFF;
+
+	wl12xx_disable_interrupts(wl);
+
+	mutex_unlock(&wl->mutex);
+
+	cancel_work_sync(&wl->irq_work);
+	cancel_work_sync(&wl->tx_work);
+	cancel_work_sync(&wl->filter_work);
+
+	mutex_lock(&wl->mutex);
+
+	/* let's notify MAC80211 about the remaining pending TX frames */
+	wl12xx_tx_flush(wl);
+
+	wl12xx_power_off(wl);
+
+	memset(wl->bssid, 0, ETH_ALEN);
+	wl->listen_int = 1;
+	wl->bss_type = MAX_BSS_TYPE;
+
+	wl->data_in_count = 0;
+	wl->rx_counter = 0;
+	wl->rx_handled = 0;
+	wl->rx_current_buffer = 0;
+	wl->rx_last_id = 0;
+	wl->next_tx_complete = 0;
+	wl->elp = false;
+	wl->psm = 0;
+	wl->tx_queue_stopped = false;
+	wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+	wl12xx_debugfs_reset(wl);
+
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_op_add_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_if_init_conf *conf)
+{
+	struct wl12xx *wl = hw->priv;
+	DECLARE_MAC_BUF(mac);
+	int ret = 0;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s",
+		     conf->type, print_mac(mac, conf->mac_addr));
+
+	mutex_lock(&wl->mutex);
+
+	switch (conf->type) {
+	case NL80211_IFTYPE_STATION:
+		wl->bss_type = BSS_TYPE_STA_BSS;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		wl->bss_type = BSS_TYPE_IBSS;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
+		memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+		ret = wl12xx_acx_station_id(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static void wl12xx_op_remove_interface(struct ieee80211_hw *hw,
+					 struct ieee80211_if_init_conf *conf)
+{
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 remove interface");
+}
+
+static int wl12xx_build_null_data(struct wl12xx *wl)
+{
+	struct wl12xx_null_data_template template;
+
+	if (!is_zero_ether_addr(wl->bssid)) {
+		memcpy(template.header.da, wl->bssid, ETH_ALEN);
+		memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+	} else {
+		memset(template.header.da, 0xff, ETH_ALEN);
+		memset(template.header.bssid, 0xff, ETH_ALEN);
+	}
+
+	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+						IEEE80211_STYPE_NULLFUNC);
+
+	return wl12xx_cmd_template_set(wl, CMD_NULL_DATA, &template,
+				       sizeof(template));
+
+}
+
+static int wl12xx_build_ps_poll(struct wl12xx *wl, u16 aid)
+{
+	struct wl12xx_ps_poll_template template;
+
+	memcpy(template.bssid, wl->bssid, ETH_ALEN);
+	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+	template.aid = aid;
+	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+	return wl12xx_cmd_template_set(wl, CMD_PS_POLL, &template,
+				       sizeof(template));
+
+}
+
+static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct wl12xx *wl = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	int channel, ret = 0;
+
+	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+		     channel,
+		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+		     conf->power_level);
+
+	mutex_lock(&wl->mutex);
+
+	if (channel != wl->channel) {
+		/* FIXME: use beacon interval provided by mac80211 */
+		ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+		if (ret < 0)
+			goto out;
+
+		wl->channel = channel;
+	}
+
+	ret = wl12xx_build_null_data(wl);
+	if (ret < 0)
+		goto out;
+
+	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+		wl12xx_info("psm enabled");
+
+		wl->psm_requested = true;
+
+		/*
+		 * We enter PSM only if we're already associated.
+		 * If we're not, we'll enter it when joining an SSID,
+		 * through the bss_info_changed() hook.
+		 */
+		ret = wl12xx_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
+		   wl->psm_requested) {
+		wl12xx_info("psm disabled");
+
+		wl->psm_requested = false;
+
+		if (wl->psm)
+			ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+	}
+
+	if (conf->power_level != wl->power_level) {
+		ret = wl12xx_acx_tx_power(wl, conf->power_level);
+		if (ret < 0)
+			goto out;
+
+		wl->power_level = conf->power_level;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+#define WL12XX_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+				  FIF_ALLMULTI | \
+				  FIF_FCSFAIL | \
+				  FIF_BCN_PRBRESP_PROMISC | \
+				  FIF_CONTROL | \
+				  FIF_OTHER_BSS)
+
+static void wl12xx_op_configure_filter(struct ieee80211_hw *hw,
+				       unsigned int changed,
+				       unsigned int *total,
+				       int mc_count,
+				       struct dev_addr_list *mc_list)
+{
+	struct wl12xx *wl = hw->priv;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+	*total &= WL12XX_SUPPORTED_FILTERS;
+	changed &= WL12XX_SUPPORTED_FILTERS;
+
+	if (changed == 0)
+		/* no filters which we support changed */
+		return;
+
+	/* FIXME: wl->rx_config and wl->rx_filter are not protected */
+
+	wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+
+	if (*total & FIF_PROMISC_IN_BSS) {
+		wl->rx_config |= CFG_BSSID_FILTER_EN;
+		wl->rx_config |= CFG_RX_ALL_GOOD;
+	}
+	if (*total & FIF_ALLMULTI)
+		/*
+		 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+		 * all multicast frames
+		 */
+		wl->rx_config &= ~CFG_MC_FILTER_EN;
+	if (*total & FIF_FCSFAIL)
+		wl->rx_filter |= CFG_RX_FCS_ERROR;
+	if (*total & FIF_BCN_PRBRESP_PROMISC) {
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+		wl->rx_config &= ~CFG_SSID_FILTER_EN;
+	}
+	if (*total & FIF_CONTROL)
+		wl->rx_filter |= CFG_RX_CTL_EN;
+	if (*total & FIF_OTHER_BSS)
+		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+
+	/*
+	 * FIXME: workqueues need to be properly cancelled on stop(), for
+	 * now let's just disable changing the filter settings. They will
+	 * be updated any on config().
+	 */
+	/* schedule_work(&wl->filter_work); */
+}
+
+/* HW encryption */
+static int wl12xx_set_key_type(struct wl12xx *wl, struct acx_set_key *key,
+			       enum set_key_cmd cmd,
+			       struct ieee80211_key_conf *mac80211_key,
+			       const u8 *addr)
+{
+	switch (mac80211_key->alg) {
+	case ALG_WEP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_WEP_DEFAULT;
+		else
+			key->key_type = KEY_WEP_ADDR;
+
+		mac80211_key->hw_key_idx = mac80211_key->keyidx;
+		break;
+	case ALG_TKIP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_TKIP_MIC_GROUP;
+		else
+			key->key_type = KEY_TKIP_MIC_PAIRWISE;
+
+		mac80211_key->hw_key_idx = mac80211_key->keyidx;
+		break;
+	case ALG_CCMP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_AES_GROUP;
+		else
+			key->key_type = KEY_AES_PAIRWISE;
+		mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		break;
+	default:
+		wl12xx_error("Unknown key algo 0x%x", mac80211_key->alg);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int wl12xx_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_sta *sta,
+			     struct ieee80211_key_conf *key)
+{
+	struct wl12xx *wl = hw->priv;
+	struct acx_set_key wl_key;
+	const u8 *addr;
+	int ret;
+
+	static const u8 bcast_addr[ETH_ALEN] =
+		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 set key");
+
+	memset(&wl_key, 0, sizeof(wl_key));
+
+	addr = sta ? sta->addr : bcast_addr;
+
+	wl12xx_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+	wl12xx_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+	wl12xx_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+		     key->alg, key->keyidx, key->keylen, key->flags);
+	wl12xx_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
+
+	mutex_lock(&wl->mutex);
+
+	switch (cmd) {
+	case SET_KEY:
+		wl_key.key_action = KEY_ADD_OR_REPLACE;
+		break;
+	case DISABLE_KEY:
+		wl_key.key_action = KEY_REMOVE;
+		break;
+	default:
+		wl12xx_error("Unsupported key cmd 0x%x", cmd);
+		break;
+	}
+
+	ret = wl12xx_set_key_type(wl, &wl_key, cmd, key, addr);
+	if (ret < 0) {
+		wl12xx_error("Set KEY type failed");
+		goto out;
+	}
+
+	if (wl_key.key_type != KEY_WEP_DEFAULT)
+		memcpy(wl_key.addr, addr, ETH_ALEN);
+
+	if ((wl_key.key_type == KEY_TKIP_MIC_GROUP) ||
+	    (wl_key.key_type == KEY_TKIP_MIC_PAIRWISE)) {
+		/*
+		 * We get the key in the following form:
+		 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+		 * but the target is expecting:
+		 * TKIP - RX MIC - TX MIC
+		 */
+		memcpy(wl_key.key, key->key, 16);
+		memcpy(wl_key.key + 16, key->key + 24, 8);
+		memcpy(wl_key.key + 24, key->key + 16, 8);
+
+	} else {
+		memcpy(wl_key.key, key->key, key->keylen);
+	}
+	wl_key.key_size = key->keylen;
+
+	wl_key.id = key->keyidx;
+	wl_key.ssid_profile = 0;
+
+	wl12xx_dump(DEBUG_CRYPT, "TARGET KEY: ", &wl_key, sizeof(wl_key));
+
+	if (wl12xx_cmd_send(wl, CMD_SET_KEYS, &wl_key, sizeof(wl_key)) < 0) {
+		wl12xx_error("Set KEY failed");
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static int wl12xx_build_basic_rates(char *rates)
+{
+	u8 index = 0;
+
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+	return index;
+}
+
+static int wl12xx_build_extended_rates(char *rates)
+{
+	u8 index = 0;
+
+	rates[index++] = IEEE80211_OFDM_RATE_6MB;
+	rates[index++] = IEEE80211_OFDM_RATE_9MB;
+	rates[index++] = IEEE80211_OFDM_RATE_12MB;
+	rates[index++] = IEEE80211_OFDM_RATE_18MB;
+	rates[index++] = IEEE80211_OFDM_RATE_24MB;
+	rates[index++] = IEEE80211_OFDM_RATE_36MB;
+	rates[index++] = IEEE80211_OFDM_RATE_48MB;
+	rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+	return index;
+}
+
+
+static int wl12xx_build_probe_req(struct wl12xx *wl, u8 *ssid, size_t ssid_len)
+{
+	struct wl12xx_probe_req_template template;
+	struct wl12xx_ie_rates *rates;
+	char *ptr;
+	u16 size;
+
+	ptr = (char *)&template;
+	size = sizeof(struct ieee80211_header);
+
+	memset(template.header.da, 0xff, ETH_ALEN);
+	memset(template.header.bssid, 0xff, ETH_ALEN);
+	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+	template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+	/* IEs */
+	/* SSID */
+	template.ssid.header.id = WLAN_EID_SSID;
+	template.ssid.header.len = ssid_len;
+	if (ssid_len && ssid)
+		memcpy(template.ssid.ssid, ssid, ssid_len);
+	size += sizeof(struct wl12xx_ie_header) + ssid_len;
+	ptr += size;
+
+	/* Basic Rates */
+	rates = (struct wl12xx_ie_rates *)ptr;
+	rates->header.id = WLAN_EID_SUPP_RATES;
+	rates->header.len = wl12xx_build_basic_rates(rates->rates);
+	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+	/* Extended rates */
+	rates = (struct wl12xx_ie_rates *)ptr;
+	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+	rates->header.len = wl12xx_build_extended_rates(rates->rates);
+	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+	wl12xx_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+	return wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, &template,
+				      size);
+}
+
+static int wl12xx_hw_scan(struct wl12xx *wl, u8 *ssid, size_t len,
+			  u8 active_scan, u8 high_prio, u8 num_channels,
+			  u8 probe_requests)
+{
+	int i, ret;
+	u32 split_scan = 0;
+	u16 scan_options = 0;
+	struct cmd_scan *params;
+	struct wl12xx_command *cmd_answer;
+
+	if (wl->scanning)
+		return -EINVAL;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+	params->params.rx_filter_options =
+		cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+	/* High priority scan */
+	if (!active_scan)
+		scan_options |= SCAN_PASSIVE;
+	if (high_prio)
+		scan_options |= SCAN_PRIORITY_HIGH;
+	params->params.scan_options = scan_options;
+
+	params->params.num_channels = num_channels;
+	params->params.num_probe_requests = probe_requests;
+	params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+	params->params.tid_trigger = 0;
+
+	for (i = 0; i < num_channels; i++) {
+		params->channels[i].min_duration = cpu_to_le32(30000);
+		params->channels[i].max_duration = cpu_to_le32(60000);
+		memset(&params->channels[i].bssid_lsb, 0xff, 4);
+		memset(&params->channels[i].bssid_msb, 0xff, 2);
+		params->channels[i].early_termination = 0;
+		params->channels[i].tx_power_att = 0;
+		params->channels[i].channel = i + 1;
+		memset(params->channels[i].pad, 0, 3);
+	}
+
+	for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
+		memset(&params->channels[i], 0,
+		       sizeof(struct basic_scan_channel_parameters));
+
+	if (len && ssid) {
+		params->params.ssid_len = len;
+		memcpy(params->params.ssid, ssid, len);
+	} else {
+		params->params.ssid_len = 0;
+		memset(params->params.ssid, 0, 32);
+	}
+
+	ret = wl12xx_build_probe_req(wl, ssid, len);
+	if (ret < 0) {
+		wl12xx_error("PROBE request template failed");
+		goto out;
+	}
+
+	ret = wl12xx_cmd_send(wl, CMD_TRIGGER_SCAN_TO, &split_scan,
+			      sizeof(u32));
+	if (ret < 0) {
+		wl12xx_error("Split SCAN failed");
+		goto out;
+	}
+
+	wl12xx_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+	wl->scanning = true;
+
+	ret = wl12xx_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+	if (ret < 0)
+		wl12xx_error("SCAN failed");
+
+	wl12xx_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+	cmd_answer = (struct wl12xx_command *) params;
+	if (cmd_answer->status != CMD_STATUS_SUCCESS) {
+		wl12xx_error("TEST command answer error: %d",
+			     cmd_answer->status);
+		wl->scanning = false;
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(params);
+	return ret;
+
+}
+
+static int wl12xx_op_hw_scan(struct ieee80211_hw *hw,
+			     struct cfg80211_scan_request *req)
+{
+	struct wl12xx *wl = hw->priv;
+	int ret;
+	u8 *ssid = NULL;
+	size_t ssid_len = 0;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+	if (req->n_ssids) {
+		ssid = req->ssids[0].ssid;
+		ssid_len = req->ssids[0].ssid_len;
+	}
+
+	mutex_lock(&wl->mutex);
+	ret = wl12xx_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static int wl12xx_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct wl12xx *wl = hw->priv;
+	int ret;
+
+	ret = wl12xx_acx_rts_threshold(wl, (u16) value);
+
+	if (ret < 0)
+		wl12xx_warning("wl12xx_op_set_rts_threshold failed: %d", ret);
+
+	return ret;
+}
+
+static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct ieee80211_bss_conf *bss_conf,
+				       u32 changed)
+{
+	enum acx_ps_mode mode;
+	struct wl12xx *wl = hw->priv;
+	struct sk_buff *beacon;
+	int ret;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+	mutex_lock(&wl->mutex);
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			wl->aid = bss_conf->aid;
+
+			ret = wl12xx_build_ps_poll(wl, wl->aid);
+			if (ret < 0)
+				goto out;
+
+			ret = wl12xx_acx_aid(wl, wl->aid);
+			if (ret < 0)
+				goto out;
+
+			/* If we want to go in PSM but we're not there yet */
+			if (wl->psm_requested && !wl->psm) {
+				mode = STATION_POWER_SAVE_MODE;
+				ret = wl12xx_ps_set_mode(wl, mode);
+				if (ret < 0)
+					goto out;
+			}
+		}
+	}
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		if (bss_conf->use_short_slot)
+			ret = wl12xx_acx_slot(wl, SLOT_TIME_SHORT);
+		else
+			ret = wl12xx_acx_slot(wl, SLOT_TIME_LONG);
+		if (ret < 0) {
+			wl12xx_warning("Set slot time failed %d", ret);
+			goto out;
+		}
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		if (bss_conf->use_short_preamble)
+			wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+		else
+			wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		if (bss_conf->use_cts_prot)
+			ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+		else
+			ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+		if (ret < 0) {
+			wl12xx_warning("Set ctsprotect failed %d", ret);
+			goto out;
+		}
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+		ret = wl12xx_build_null_data(wl);
+		if (ret < 0)
+			goto out;
+
+		if (wl->bss_type != BSS_TYPE_IBSS) {
+			ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1);
+			if (ret < 0)
+				goto out;
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		beacon = ieee80211_beacon_get(hw, vif);
+		ret = wl12xx_cmd_template_set(wl, CMD_BEACON, beacon->data,
+					      beacon->len);
+
+		if (ret < 0) {
+			dev_kfree_skb(beacon);
+			goto out;
+		}
+
+		ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
+					      beacon->len);
+
+		dev_kfree_skb(beacon);
+
+		if (ret < 0)
+			goto out;
+
+		ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl12xx_rates[] = {
+	{ .bitrate = 10,
+	  .hw_value = 0x1,
+	  .hw_value_short = 0x1, },
+	{ .bitrate = 20,
+	  .hw_value = 0x2,
+	  .hw_value_short = 0x2,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55,
+	  .hw_value = 0x4,
+	  .hw_value_short = 0x4,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110,
+	  .hw_value = 0x20,
+	  .hw_value_short = 0x20,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60,
+	  .hw_value = 0x8,
+	  .hw_value_short = 0x8, },
+	{ .bitrate = 90,
+	  .hw_value = 0x10,
+	  .hw_value_short = 0x10, },
+	{ .bitrate = 120,
+	  .hw_value = 0x40,
+	  .hw_value_short = 0x40, },
+	{ .bitrate = 180,
+	  .hw_value = 0x80,
+	  .hw_value_short = 0x80, },
+	{ .bitrate = 240,
+	  .hw_value = 0x200,
+	  .hw_value_short = 0x200, },
+	{ .bitrate = 360,
+	 .hw_value = 0x400,
+	 .hw_value_short = 0x400, },
+	{ .bitrate = 480,
+	  .hw_value = 0x800,
+	  .hw_value_short = 0x800, },
+	{ .bitrate = 540,
+	  .hw_value = 0x1000,
+	  .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl12xx_channels[] = {
+	{ .hw_value = 1, .center_freq = 2412},
+	{ .hw_value = 2, .center_freq = 2417},
+	{ .hw_value = 3, .center_freq = 2422},
+	{ .hw_value = 4, .center_freq = 2427},
+	{ .hw_value = 5, .center_freq = 2432},
+	{ .hw_value = 6, .center_freq = 2437},
+	{ .hw_value = 7, .center_freq = 2442},
+	{ .hw_value = 8, .center_freq = 2447},
+	{ .hw_value = 9, .center_freq = 2452},
+	{ .hw_value = 10, .center_freq = 2457},
+	{ .hw_value = 11, .center_freq = 2462},
+	{ .hw_value = 12, .center_freq = 2467},
+	{ .hw_value = 13, .center_freq = 2472},
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl12xx_band_2ghz = {
+	.channels = wl12xx_channels,
+	.n_channels = ARRAY_SIZE(wl12xx_channels),
+	.bitrates = wl12xx_rates,
+	.n_bitrates = ARRAY_SIZE(wl12xx_rates),
+};
+
+static const struct ieee80211_ops wl12xx_ops = {
+	.start = wl12xx_op_start,
+	.stop = wl12xx_op_stop,
+	.add_interface = wl12xx_op_add_interface,
+	.remove_interface = wl12xx_op_remove_interface,
+	.config = wl12xx_op_config,
+	.configure_filter = wl12xx_op_configure_filter,
+	.tx = wl12xx_op_tx,
+	.set_key = wl12xx_op_set_key,
+	.hw_scan = wl12xx_op_hw_scan,
+	.bss_info_changed = wl12xx_op_bss_info_changed,
+	.set_rts_threshold = wl12xx_op_set_rts_threshold,
+};
+
+static int wl12xx_register_hw(struct wl12xx *wl)
+{
+	int ret;
+
+	if (wl->mac80211_registered)
+		return 0;
+
+	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+	ret = ieee80211_register_hw(wl->hw);
+	if (ret < 0) {
+		wl12xx_error("unable to register mac80211 hw: %d", ret);
+		return ret;
+	}
+
+	wl->mac80211_registered = true;
+
+	wl12xx_notice("loaded");
+
+	return 0;
+}
+
+static int wl12xx_init_ieee80211(struct wl12xx *wl)
+{
+	/* The tx descriptor buffer and the TKIP space */
+	wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+		+ WL12XX_TKIP_IV_SPACE;
+
+	/* unit us */
+	/* FIXME: find a proper value */
+	wl->hw->channel_change_time = 10000;
+
+	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_NOISE_DBM;
+
+	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	wl->hw->wiphy->max_scan_ssids = 1;
+	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl12xx_band_2ghz;
+
+	SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
+
+	return 0;
+}
+
+#define WL12XX_DEFAULT_CHANNEL 1
+static int __devinit wl12xx_probe(struct spi_device *spi)
+{
+	struct wl12xx_platform_data *pdata;
+	struct ieee80211_hw *hw;
+	struct wl12xx *wl;
+	int ret, i;
+	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		wl12xx_error("no platform data");
+		return -ENODEV;
+	}
+
+	hw = ieee80211_alloc_hw(sizeof(*wl), &wl12xx_ops);
+	if (!hw) {
+		wl12xx_error("could not alloc ieee80211_hw");
+		return -ENOMEM;
+	}
+
+	wl = hw->priv;
+	memset(wl, 0, sizeof(*wl));
+
+	wl->hw = hw;
+	dev_set_drvdata(&spi->dev, wl);
+	wl->spi = spi;
+
+	wl->data_in_count = 0;
+
+	skb_queue_head_init(&wl->tx_queue);
+
+	INIT_WORK(&wl->tx_work, wl12xx_tx_work);
+	INIT_WORK(&wl->filter_work, wl12xx_filter_work);
+	wl->channel = WL12XX_DEFAULT_CHANNEL;
+	wl->scanning = false;
+	wl->default_key = 0;
+	wl->listen_int = 1;
+	wl->rx_counter = 0;
+	wl->rx_handled = 0;
+	wl->rx_current_buffer = 0;
+	wl->rx_last_id = 0;
+	wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+	wl->elp = false;
+	wl->psm = 0;
+	wl->psm_requested = false;
+	wl->tx_queue_stopped = false;
+	wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+	/* We use the default power on sleep time until we know which chip
+	 * we're using */
+	wl->chip.power_on_sleep = WL12XX_DEFAULT_POWER_ON_SLEEP;
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		wl->tx_frames[i] = NULL;
+
+	wl->next_tx_complete = 0;
+
+	/*
+	 * In case our MAC address is not correctly set,
+	 * we use a random but Nokia MAC.
+	 */
+	memcpy(wl->mac_addr, nokia_oui, 3);
+	get_random_bytes(wl->mac_addr + 3, 3);
+
+	wl->state = WL12XX_STATE_OFF;
+	mutex_init(&wl->mutex);
+
+	wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
+	wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
+
+	/* This is the only SPI value that we need to set here, the rest
+	 * comes from the board-peripherals file */
+	spi->bits_per_word = 32;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		wl12xx_error("spi_setup failed");
+		goto out_free;
+	}
+
+	wl->set_power = pdata->set_power;
+	if (!wl->set_power) {
+		wl12xx_error("set power function missing in platform data");
+		return -ENODEV;
+	}
+
+	wl->irq = spi->irq;
+	if (wl->irq < 0) {
+		wl12xx_error("irq missing in platform data");
+		return -ENODEV;
+	}
+
+	ret = request_irq(wl->irq, wl12xx_irq, 0, DRIVER_NAME, wl);
+	if (ret < 0) {
+		wl12xx_error("request_irq() failed: %d", ret);
+		goto out_free;
+	}
+
+	set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(wl->irq);
+
+	ret = wl12xx_init_ieee80211(wl);
+	if (ret)
+		goto out_irq;
+
+	ret = wl12xx_register_hw(wl);
+	if (ret)
+		goto out_irq;
+
+	wl12xx_debugfs_init(wl);
+
+	wl12xx_notice("initialized");
+
+	return 0;
+
+ out_irq:
+	free_irq(wl->irq, wl);
+
+ out_free:
+	ieee80211_free_hw(hw);
+
+	return ret;
+}
+
+static int __devexit wl12xx_remove(struct spi_device *spi)
+{
+	struct wl12xx *wl = dev_get_drvdata(&spi->dev);
+
+	ieee80211_unregister_hw(wl->hw);
+
+	wl12xx_debugfs_exit(wl);
+
+	free_irq(wl->irq, wl);
+	kfree(wl->target_mem_map);
+	kfree(wl->data_path);
+	kfree(wl->fw);
+	wl->fw = NULL;
+	kfree(wl->nvs);
+	wl->nvs = NULL;
+	ieee80211_free_hw(wl->hw);
+
+	return 0;
+}
+
+
+static struct spi_driver wl12xx_spi_driver = {
+	.driver = {
+		.name		= "wl12xx",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= wl12xx_probe,
+	.remove		= __devexit_p(wl12xx_remove),
+};
+
+static int __init wl12xx_init(void)
+{
+	int ret;
+
+	ret = spi_register_driver(&wl12xx_spi_driver);
+	if (ret < 0) {
+		wl12xx_error("failed to register spi driver: %d", ret);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit wl12xx_exit(void)
+{
+	spi_unregister_driver(&wl12xx_spi_driver);
+
+	wl12xx_notice("unloaded");
+}
+
+module_init(wl12xx_init);
+module_exit(wl12xx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>, "
+		"Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
new file mode 100644
index 00000000000..83a10117330
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -0,0 +1,151 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "reg.h"
+#include "ps.h"
+#include "spi.h"
+
+#define WL12XX_WAKEUP_TIMEOUT 2000
+
+/* Routines to toggle sleep mode while in ELP */
+void wl12xx_ps_elp_sleep(struct wl12xx *wl)
+{
+	if (wl->elp || !wl->psm)
+		return;
+
+	wl12xx_debug(DEBUG_PSM, "chip to elp");
+
+	wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+
+	wl->elp = true;
+}
+
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl)
+{
+	unsigned long timeout;
+	u32 elp_reg;
+
+	if (!wl->elp)
+		return 0;
+
+	wl12xx_debug(DEBUG_PSM, "waking up chip from elp");
+
+	timeout = jiffies + msecs_to_jiffies(WL12XX_WAKEUP_TIMEOUT);
+
+	wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+	elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+	/*
+	 * FIXME: we should wait for irq from chip but, as a temporary
+	 * solution to simplify locking, let's poll instead
+	 */
+	while (!(elp_reg & ELPCTRL_WLAN_READY)) {
+		if (time_after(jiffies, timeout)) {
+			wl12xx_error("elp wakeup timeout");
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+		elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+	}
+
+	wl12xx_debug(DEBUG_PSM, "wakeup time: %u ms",
+		     jiffies_to_msecs(jiffies) -
+		     (jiffies_to_msecs(timeout) - WL12XX_WAKEUP_TIMEOUT));
+
+	wl->elp = false;
+
+	return 0;
+}
+
+static int wl12xx_ps_set_elp(struct wl12xx *wl, bool enable)
+{
+	int ret;
+
+	if (enable) {
+		wl12xx_debug(DEBUG_PSM, "sleep auth psm/elp");
+
+		/*
+		 * FIXME: we should PSM_ELP, but because of firmware wakeup
+		 * problems let's use only PSM_PS
+		 */
+		ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_PS);
+		if (ret < 0)
+			return ret;
+
+		wl12xx_ps_elp_sleep(wl);
+	} else {
+		wl12xx_debug(DEBUG_PSM, "sleep auth cam");
+
+		/*
+		 * When the target is in ELP, we can only
+		 * access the ELP control register. Thus,
+		 * we have to wake the target up before
+		 * changing the power authorization.
+		 */
+
+		wl12xx_ps_elp_wakeup(wl);
+
+		ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode)
+{
+	int ret;
+
+	switch (mode) {
+	case STATION_POWER_SAVE_MODE:
+		wl12xx_debug(DEBUG_PSM, "entering psm");
+		ret = wl12xx_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+		if (ret < 0)
+			return ret;
+
+		ret = wl12xx_ps_set_elp(wl, true);
+		if (ret < 0)
+			return ret;
+
+		wl->psm = 1;
+		break;
+	case STATION_ACTIVE_MODE:
+	default:
+		wl12xx_debug(DEBUG_PSM, "leaving psm");
+		ret = wl12xx_ps_set_elp(wl, false);
+		if (ret < 0)
+			return ret;
+
+		ret = wl12xx_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+		if (ret < 0)
+			return ret;
+
+		wl->psm = 0;
+		break;
+	}
+
+	return ret;
+}
+
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
new file mode 100644
index 00000000000..5d7c5255383
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -0,0 +1,36 @@
+#ifndef __WL12XX_PS_H__
+#define __WL12XX_PS_H__
+
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "acx.h"
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode);
+void wl12xx_ps_elp_sleep(struct wl12xx *wl);
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl);
+
+
+#endif /* __WL12XX_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
new file mode 100644
index 00000000000..e421643215c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/reg.h
@@ -0,0 +1,745 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+#include "wl12xx.h"
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE      0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR         0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP             0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY  0x5
+#define ELPCTRL_SLEEP               0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY          0x2
+
+/*
+ * Interrupt registers.
+ * 64 bit interrupt sources registers ws ced.
+ * sme interupts were removed and new ones were added.
+ * Order was changed.
+ */
+#define FIQ_MASK                       (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_L                     (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_H                     (REGISTERS_BASE + 0x0404)
+#define FIQ_MASK_SET                   (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_L                 (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_H                 (REGISTERS_BASE + 0x040C)
+#define FIQ_MASK_CLR                   (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_L                 (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_H                 (REGISTERS_BASE + 0x0414)
+#define IRQ_MASK                       (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_L                     (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_H                     (REGISTERS_BASE + 0x041C)
+#define IRQ_MASK_SET                   (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_L                 (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_H                 (REGISTERS_BASE + 0x0424)
+#define IRQ_MASK_CLR                   (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_L                 (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_H                 (REGISTERS_BASE + 0x042C)
+#define ECPU_MASK                      (REGISTERS_BASE + 0x0448)
+#define FIQ_STS_L                      (REGISTERS_BASE + 0x044C)
+#define FIQ_STS_H                      (REGISTERS_BASE + 0x0450)
+#define IRQ_STS_L                      (REGISTERS_BASE + 0x0454)
+#define IRQ_STS_H                      (REGISTERS_BASE + 0x0458)
+#define INT_STS_ND                     (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_L                  (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_H                  (REGISTERS_BASE + 0x0468)
+#define INT_STS_CLR                    (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_L                  (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_H                  (REGISTERS_BASE + 0x04B8)
+#define INT_ACK                        (REGISTERS_BASE + 0x046C)
+#define INT_ACK_L                      (REGISTERS_BASE + 0x046C)
+#define INT_ACK_H                      (REGISTERS_BASE + 0x0470)
+#define INT_TRIG                       (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_L                     (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_H                     (REGISTERS_BASE + 0x0478)
+#define HOST_STS_L                     (REGISTERS_BASE + 0x045C)
+#define HOST_STS_H                     (REGISTERS_BASE + 0x0460)
+#define HOST_MASK                      (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_L                    (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_H                    (REGISTERS_BASE + 0x0434)
+#define HOST_MASK_SET                  (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_L                (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_H                (REGISTERS_BASE + 0x043C)
+#define HOST_MASK_CLR                  (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_L                (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_H                (REGISTERS_BASE + 0x0444)
+
+/* Host Interrupts*/
+#define HINT_MASK                      (REGISTERS_BASE + 0x0494)
+#define HINT_MASK_SET                  (REGISTERS_BASE + 0x0498)
+#define HINT_MASK_CLR                  (REGISTERS_BASE + 0x049C)
+#define HINT_STS_ND_MASKED             (REGISTERS_BASE + 0x04A0)
+/*1150 spec calls this HINT_STS_RAW*/
+#define HINT_STS_ND		       (REGISTERS_BASE + 0x04B0)
+#define HINT_STS_CLR                   (REGISTERS_BASE + 0x04A4)
+#define HINT_ACK                       (REGISTERS_BASE + 0x04A8)
+#define HINT_TRIG                      (REGISTERS_BASE + 0x04AC)
+
+/* Device Configuration registers*/
+#define SOR_CFG                        (REGISTERS_BASE + 0x0800)
+#define ECPU_CTRL                      (REGISTERS_BASE + 0x0804)
+#define HI_CFG                         (REGISTERS_BASE + 0x0808)
+#define EE_START                       (REGISTERS_BASE + 0x080C)
+
+#define CHIP_ID_B                      (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1251_PG10	           (0x7010101)
+#define CHIP_ID_1251_PG11	           (0x7020101)
+#define CHIP_ID_1251_PG12	           (0x7030101)
+
+#define ENABLE                         (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE                   (REGISTERS_BASE + 0x5804)
+#define ELP_CMD                        (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME                   (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME                   (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME                   (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT               (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0                       (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1                       (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2                       (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3                       (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4                       (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET                   (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR                   (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5                       (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET                   (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR                   (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6                       (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7                       (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8                       (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9                       (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1                       (REGISTERS_BASE + 0x0994)
+#define SPARE_A2                       (REGISTERS_BASE + 0x0998)
+#define SPARE_A3                       (REGISTERS_BASE + 0x099C)
+#define SPARE_A4                       (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5                       (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6                       (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7                       (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8                       (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1                       (REGISTERS_BASE + 0x5420)
+#define SPARE_B2                       (REGISTERS_BASE + 0x5424)
+#define SPARE_B3                       (REGISTERS_BASE + 0x5428)
+#define SPARE_B4                       (REGISTERS_BASE + 0x542C)
+#define SPARE_B5                       (REGISTERS_BASE + 0x5430)
+#define SPARE_B6                       (REGISTERS_BASE + 0x5434)
+#define SPARE_B7                       (REGISTERS_BASE + 0x5438)
+#define SPARE_B8                       (REGISTERS_BASE + 0x543C)
+
+enum wl12xx_acx_int_reg {
+	ACX_REG_INTERRUPT_TRIG,
+	ACX_REG_INTERRUPT_TRIG_H,
+
+/*=============================================
+  Host Interrupt Mask Register - 32bit (RW)
+  ------------------------------------------
+  Setting a bit in this register masks the
+  corresponding interrupt to the host.
+  0 - RX0		- Rx first dubble buffer Data Interrupt
+  1 - TXD		- Tx Data Interrupt
+  2 - TXXFR		- Tx Transfer Interrupt
+  3 - RX1		- Rx second dubble buffer Data Interrupt
+  4 - RXXFR		- Rx Transfer Interrupt
+  5 - EVENT_A	- Event Mailbox interrupt
+  6 - EVENT_B	- Event Mailbox interrupt
+  7 - WNONHST	- Wake On Host Interrupt
+  8 - TRACE_A	- Debug Trace interrupt
+  9 - TRACE_B	- Debug Trace interrupt
+ 10 - CDCMP		- Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP		- Initialization Complete Interrupt
+ 16 - SG SE		- Soft Gemini - Sense enable interrupt
+ 17 - SG SD		- Soft Gemini - Sense disable interrupt
+ 18 -			-
+ 19 -			-
+ 20 -			-
+ 21-			-
+ Default: 0x0001
+*==============================================*/
+	ACX_REG_INTERRUPT_MASK,
+
+/*=============================================
+  Host Interrupt Mask Set 16bit, (Write only)
+  ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+	ACX_REG_HINT_MASK_SET,
+
+/*=============================================
+  Host Interrupt Mask Clear 16bit,(Write only)
+  ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+	ACX_REG_HINT_MASK_CLR,
+
+/*=============================================
+  Host Interrupt Status Nondestructive Read
+  16bit,(Read only)
+  ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+	ACX_REG_INTERRUPT_NO_CLEAR,
+
+/*=============================================
+  Host Interrupt Status Clear on Read  Register
+  16bit,(Read only)
+  ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+	ACX_REG_INTERRUPT_CLEAR,
+
+/*=============================================
+  Host Interrupt Acknowledge Register
+  16bit,(Write only)
+  ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+	ACX_REG_INTERRUPT_ACK,
+
+/*===============================================
+   Host Software Reset - 32bit RW
+ ------------------------------------------
+    [31:1] Reserved
+    0  SOFT_RESET Soft Reset  - When this bit is set,
+    it holds the Wlan hardware in a soft reset state.
+    This reset disables all MAC and baseband processor
+    clocks except the CardBus/PCI interface clock.
+    It also initializes all MAC state machines except
+    the host interface. It does not reload the
+    contents of the EEPROM. When this bit is cleared
+    (not self-clearing), the Wlan hardware
+    exits the software reset state.
+===============================================*/
+	ACX_REG_SLV_SOFT_RESET,
+
+/*===============================================
+ EEPROM Burst Read Start  - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0  ACX_EE_START -  EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+	ACX_REG_EE_START,
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU   - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+	ACX_REG_ECPU_CONTROL,
+
+	ACX_REG_TABLE_LEN
+};
+
+#define ACX_SLV_SOFT_RESET_BIT   BIT(1)
+#define ACX_REG_EEPROM_START_BIT BIT(1)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+  Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR				(SCR_PAD0)
+
+/*===============================================
+  Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR				(SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX				(ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG				(RX_CFG)
+#define REG_RX_FILTER				(RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP	 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS		 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID			 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC			 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC	 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC	 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID	 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID		 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST		 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID	 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS		 0x2000
+#define RX_CFG_TSF			 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS	 (RX_CFG_ENABLE_ANY_DEST_MAC | \
+					  RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS	 (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+					  | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+					  RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS	 (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+					  | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN  (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+				    | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+				    | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN	 (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+					  RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN   (RX_CFG_ENABLE_ONLY_MY_SSID | \
+					  RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF	      (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+				       | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+				       | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL	 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN  (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+					| CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN	     (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+				      | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+				      | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+				      | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+  Phy regs
+ ===============================================*/
+#define ACX_PHY_ADDR_REG                SBB_ADDR
+#define ACX_PHY_DATA_REG                SBB_DATA
+#define ACX_PHY_CTRL_REG                SBB_CTL
+#define ACX_PHY_REG_WR_MASK             0x00000001ul
+#define ACX_PHY_REG_RD_MASK             0x00000002ul
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE  - EEPROM Write Request  - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define ACX_EE_CTL_REG                      EE_CTL
+#define EE_WRITE                            0x00000001ul
+#define EE_READ                             0x00000002ul
+
+/*===============================================
+  EEPROM Address  - 32bit RW
+  ------------------------------------------
+  This register specifies the address
+  within the EEPROM from/to which to read/write data.
+  ===============================================*/
+#define ACX_EE_ADDR_REG                     EE_ADDR
+
+/*===============================================
+  EEPROM Data  - 32bit RW
+  ------------------------------------------
+  This register either holds the read 8 bits of
+  data from the EEPROM or the write data
+  to be written to the EEPROM.
+  ===============================================*/
+#define ACX_EE_DATA_REG                     EE_DATA
+
+/*===============================================
+  EEPROM Base Address  - 32bit RW
+  ------------------------------------------
+  This register holds the upper nine bits
+  [23:15] of the 24-bit Wlan hardware memory
+  address for burst reads from EEPROM accesses.
+  The EEPROM provides the lower 15 bits of this address.
+  The MSB of the address from the EEPROM is ignored.
+  ===============================================*/
+#define ACX_EE_CFG                          EE_CFG
+
+/*===============================================
+  GPIO Output Values  -32bit, RW
+  ------------------------------------------
+  [31:16]  Reserved
+  [15: 0]  Specify the output values (at the output driver inputs) for
+  GPIO[15:0], respectively.
+  ===============================================*/
+#define ACX_GPIO_OUT_REG            GPIO_OUT
+#define ACX_MAX_GPIO_LINES          15
+
+/*===============================================
+  Contention window  -32bit, RW
+  ------------------------------------------
+  [31:26]  Reserved
+  [25:16]  Max (0x3ff)
+  [15:07]  Reserved
+  [06:00]  Current contention window value - default is 0x1F
+  ===============================================*/
+#define ACX_CONT_WIND_CFG_REG    CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK   0x0000007f
+#define ACX_CONT_WIND_MAX        0x03ff0000
+
+/*
+ * Indirect slave register/memory registers
+ * ----------------------------------------
+ */
+#define HW_SLAVE_REG_ADDR_REG		0x00000004
+#define HW_SLAVE_REG_DATA_REG		0x00000008
+#define HW_SLAVE_REG_CTRL_REG		0x0000000c
+
+#define SLAVE_AUTO_INC				0x00010000
+#define SLAVE_NO_AUTO_INC			0x00000000
+#define SLAVE_HOST_LITTLE_ENDIAN	0x00000000
+
+#define HW_SLAVE_MEM_ADDR_REG		SLV_MEM_ADDR
+#define HW_SLAVE_MEM_DATA_REG		SLV_MEM_DATA
+#define HW_SLAVE_MEM_CTRL_REG		SLV_MEM_CTL
+#define HW_SLAVE_MEM_ENDIAN_REG		SLV_END_CTL
+
+#define HW_FUNC_EVENT_INT_EN		0x8000
+#define HW_FUNC_EVENT_MASK_REG		0x00000034
+
+#define ACX_MAC_TIMESTAMP_REG	(MAC_TIMESTAMP)
+
+/*===============================================
+  HI_CFG Interface Configuration Register Values
+  ------------------------------------------
+  ===============================================*/
+#define HI_CFG_UART_ENABLE          0x00000004
+#define HI_CFG_RST232_ENABLE        0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT     0x00000010
+#define HI_CFG_HOST_INT_ENABLE      0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE  0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW  0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15  0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ *       for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2                       0
+#define REF_FREQ_26_0                       1
+#define REF_FREQ_38_4                       2
+#define REF_FREQ_40_0                       3
+#define REF_FREQ_33_6                       4
+#define REF_FREQ_NUM                        5
+
+#define LUT_PARAM_INTEGER_DIVIDER           0
+#define LUT_PARAM_FRACTIONAL_DIVIDER        1
+#define LUT_PARAM_ATTN_BB                   2
+#define LUT_PARAM_ALPHA_BB                  3
+#define LUT_PARAM_STOP_TIME_BB              4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER        5
+#define LUT_PARAM_NUM                       6
+
+#define ACX_EEPROMLESS_IND_REG              (SCR_PAD4)
+#define USE_EEPROM                          0
+#define SOFT_RESET_MAX_TIME                 1000000
+#define SOFT_RESET_STALL_TIME               1000
+#define NVS_DATA_BUNDARY_ALIGNMENT          4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE          512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT					0x00000101
+
+
+/******************************************************************************
+
+    CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+	RADIO_BAND_2_4GHZ = 0,  /* 2.4 Ghz band */
+	RADIO_BAND_5GHZ = 1,    /* 5 Ghz band */
+	RADIO_BAND_JAPAN_4_9_GHZ = 2,
+	DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+	INVALID_BAND = 0xFE,
+	MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+	NO_RATE      = 0,
+	RATE_1MBPS   = 0x0A,
+	RATE_2MBPS   = 0x14,
+	RATE_5_5MBPS = 0x37,
+	RATE_6MBPS   = 0x0B,
+	RATE_9MBPS   = 0x0F,
+	RATE_11MBPS  = 0x6E,
+	RATE_12MBPS  = 0x0A,
+	RATE_18MBPS  = 0x0E,
+	RATE_22MBPS  = 0xDC,
+	RATE_24MBPS  = 0x09,
+	RATE_36MBPS  = 0x0D,
+	RATE_48MBPS  = 0x08,
+	RATE_54MBPS  = 0x0C
+};
+
+enum {
+	RATE_INDEX_1MBPS   =  0,
+	RATE_INDEX_2MBPS   =  1,
+	RATE_INDEX_5_5MBPS =  2,
+	RATE_INDEX_6MBPS   =  3,
+	RATE_INDEX_9MBPS   =  4,
+	RATE_INDEX_11MBPS  =  5,
+	RATE_INDEX_12MBPS  =  6,
+	RATE_INDEX_18MBPS  =  7,
+	RATE_INDEX_22MBPS  =  8,
+	RATE_INDEX_24MBPS  =  9,
+	RATE_INDEX_36MBPS  =  10,
+	RATE_INDEX_48MBPS  =  11,
+	RATE_INDEX_54MBPS  =  12,
+	RATE_INDEX_MAX     =  RATE_INDEX_54MBPS,
+	MAX_RATE_INDEX,
+	INVALID_RATE_INDEX = MAX_RATE_INDEX,
+	RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+	RATE_MASK_1MBPS = 0x1,
+	RATE_MASK_2MBPS = 0x2,
+	RATE_MASK_5_5MBPS = 0x4,
+	RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT        BIT(6)
+#define PBCC_RATE_BIT        BIT(7)
+
+enum {
+	CCK_LONG = 0,
+	CCK_SHORT = SHORT_PREAMBLE_BIT,
+	PBCC_LONG = PBCC_RATE_BIT,
+	PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+	OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15   - Indicates Preamble type (1=SHORT, 0=LONG).
+	Notes:
+	Must be LONG (0) for 1Mbps rate.
+	Does not apply (set to 0) for RevG-OFDM rates.
+b14   - Indicates PBCC encoding (1=PBCC, 0=not).
+	Notes:
+	Does not apply (set to 0) for rates 1 and 2 Mbps.
+	Does not apply (set to 0) for RevG-OFDM rates.
+b13    - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+#define TNETW1251_CHIP_ID_PG1_0         0x07010101
+#define TNETW1251_CHIP_ID_PG1_1         0x07020101
+#define TNETW1251_CHIP_ID_PG1_2	        0x07030101
+
+/*************************************************************************
+
+    Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD       BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
new file mode 100644
index 00000000000..981ea259eb8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "rx.h"
+
+static void wl12xx_rx_header(struct wl12xx *wl,
+			     struct wl12xx_rx_descriptor *desc)
+{
+	u32 rx_packet_ring_addr;
+
+	rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
+	if (wl->rx_current_buffer)
+		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+	wl12xx_spi_mem_read(wl, rx_packet_ring_addr, desc,
+			    sizeof(struct wl12xx_rx_descriptor));
+}
+
+static void wl12xx_rx_status(struct wl12xx *wl,
+			     struct wl12xx_rx_descriptor *desc,
+			     struct ieee80211_rx_status *status,
+			     u8 beacon)
+{
+	memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->mactime = desc->timestamp;
+
+	/*
+	 * The rx status timestamp is a 32 bits value while the TSF is a
+	 * 64 bits one.
+	 * For IBSS merging, TSF is mandatory, so we have to get it
+	 * somehow, so we ask for ACX_TSF_INFO.
+	 * That could be moved to the get_tsf() hook, but unfortunately,
+	 * this one must be atomic, while our SPI routines can sleep.
+	 */
+	if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
+		u64 mactime;
+		int ret;
+		struct wl12xx_command cmd;
+		struct acx_tsf_info *tsf_info;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		ret = wl12xx_cmd_interrogate(wl, ACX_TSF_INFO,
+					     sizeof(struct acx_tsf_info),
+					     &cmd);
+		if (ret < 0) {
+			wl12xx_warning("ACX_FW_REV interrogate failed");
+			return;
+		}
+
+		tsf_info = (struct acx_tsf_info *)&(cmd.parameters);
+
+		mactime = tsf_info->current_tsf_lsb |
+			(tsf_info->current_tsf_msb << 31);
+
+		status->mactime = mactime;
+	}
+
+	status->signal = desc->rssi;
+	status->qual = (desc->rssi - WL12XX_RX_MIN_RSSI) * 100 /
+		(WL12XX_RX_MAX_RSSI - WL12XX_RX_MIN_RSSI);
+	status->qual = min(status->qual, 100);
+	status->qual = max(status->qual, 0);
+
+	/*
+	 * FIXME: guessing that snr needs to be divided by two, otherwise
+	 * the values don't make any sense
+	 */
+	status->noise = desc->rssi - desc->snr / 2;
+
+	status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+	status->flag |= RX_FLAG_TSFT;
+
+	if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+		if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
+			status->flag |= RX_FLAG_DECRYPTED;
+
+		if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
+			status->flag |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+	/* FIXME: set status->rate_idx */
+}
+
+static void wl12xx_rx_body(struct wl12xx *wl,
+			   struct wl12xx_rx_descriptor *desc)
+{
+	struct sk_buff *skb;
+	struct ieee80211_rx_status status;
+	u8 *rx_buffer, beacon = 0;
+	u16 length, *fc;
+	u32 curr_id, last_id_inc, rx_packet_ring_addr;
+
+	length = WL12XX_RX_ALIGN(desc->length  - PLCP_HEADER_LENGTH);
+	curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
+	last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
+
+	if (last_id_inc != curr_id) {
+		wl12xx_warning("curr ID:%d, last ID inc:%d",
+			       curr_id, last_id_inc);
+		wl->rx_last_id = curr_id;
+	} else {
+		wl->rx_last_id = last_id_inc;
+	}
+
+	rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
+		sizeof(struct wl12xx_rx_descriptor) + 20;
+	if (wl->rx_current_buffer)
+		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+	skb = dev_alloc_skb(length);
+	if (!skb) {
+		wl12xx_error("Couldn't allocate RX frame");
+		return;
+	}
+
+	rx_buffer = skb_put(skb, length);
+	wl12xx_spi_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
+
+	/* The actual lenght doesn't include the target's alignment */
+	skb->len = desc->length  - PLCP_HEADER_LENGTH;
+
+	fc = (u16 *)skb->data;
+
+	if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+		beacon = 1;
+
+	wl12xx_rx_status(wl, desc, &status, beacon);
+
+	wl12xx_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+		     beacon ? "beacon" : "");
+
+	ieee80211_rx(wl->hw, skb, &status);
+}
+
+static void wl12xx_rx_ack(struct wl12xx *wl)
+{
+	u32 data, addr;
+
+	if (wl->rx_current_buffer) {
+		addr = ACX_REG_INTERRUPT_TRIG_H;
+		data = INTR_TRIG_RX_PROC1;
+	} else {
+		addr = ACX_REG_INTERRUPT_TRIG;
+		data = INTR_TRIG_RX_PROC0;
+	}
+
+	wl12xx_reg_write32(wl, addr, data);
+
+	/* Toggle buffer ring */
+	wl->rx_current_buffer = !wl->rx_current_buffer;
+}
+
+
+void wl12xx_rx(struct wl12xx *wl)
+{
+	struct wl12xx_rx_descriptor rx_desc;
+
+	if (wl->state != WL12XX_STATE_ON)
+		return;
+
+	/* We first read the frame's header */
+	wl12xx_rx_header(wl, &rx_desc);
+
+	/* Now we can read the body */
+	wl12xx_rx_body(wl, &rx_desc);
+
+	/* Finally, we need to ACK the RX */
+	wl12xx_rx_ack(wl);
+
+	return;
+}
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h
new file mode 100644
index 00000000000..8a23fdea501
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_RX_H__
+#define __WL12XX_RX_H__
+
+#include <linux/bitops.h>
+
+/*
+ * RX PATH
+ *
+ * The Rx path uses a double buffer and an rx_contro structure, each located
+ * at a fixed address in the device memory. The host keeps track of which
+ * buffer is available and alternates between them on a per packet basis.
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet.
+ * The RX path goes like that:
+ * 1) The target generates an interrupt each time a new packet is received.
+ *   There are 2 RX interrupts, one for each buffer.
+ * 2) The host reads the received packet from one of the double buffers.
+ * 3) The host triggers a target interrupt.
+ * 4) The target prepares the next RX packet.
+ */
+
+#define WL12XX_RX_MAX_RSSI -30
+#define WL12XX_RX_MIN_RSSI -95
+
+#define WL12XX_RX_ALIGN_TO 4
+#define WL12XX_RX_ALIGN(len) (((len) + WL12XX_RX_ALIGN_TO - 1) & \
+			     ~(WL12XX_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT   BIT(0)
+#define OFDM_RATE_BIT        BIT(6)
+#define PBCC_RATE_BIT        BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define RX_DESC_VALID_FCS         0x0001
+#define RX_DESC_MATCH_RXADDR1     0x0002
+#define RX_DESC_MCAST             0x0004
+#define RX_DESC_STAINTIM          0x0008
+#define RX_DESC_VIRTUAL_BM        0x0010
+#define RX_DESC_BCAST             0x0020
+#define RX_DESC_MATCH_SSID        0x0040
+#define RX_DESC_MATCH_BSSID       0x0080
+#define RX_DESC_ENCRYPTION_MASK   0x0300
+#define RX_DESC_MEASURMENT        0x0400
+#define RX_DESC_SEQNUM_MASK       0x1800
+#define	RX_DESC_MIC_FAIL	  0x2000
+#define	RX_DESC_DECRYPT_FAIL	  0x4000
+
+struct wl12xx_rx_descriptor {
+	u32 timestamp; /* In microseconds */
+	u16 length; /* Paylod length, including headers */
+	u16 flags;
+
+	/*
+	 * 0 - 802.11
+	 * 1 - 802.3
+	 * 2 - IP
+	 * 3 - Raw Codec
+	 */
+	u8 type;
+
+	/*
+	 * Recevied Rate:
+	 * 0x0A - 1MBPS
+	 * 0x14 - 2MBPS
+	 * 0x37 - 5_5MBPS
+	 * 0x0B - 6MBPS
+	 * 0x0F - 9MBPS
+	 * 0x6E - 11MBPS
+	 * 0x0A - 12MBPS
+	 * 0x0E - 18MBPS
+	 * 0xDC - 22MBPS
+	 * 0x09 - 24MBPS
+	 * 0x0D - 36MBPS
+	 * 0x08 - 48MBPS
+	 * 0x0C - 54MBPS
+	 */
+	u8 rate;
+
+	u8 mod_pre; /* Modulation and preamble */
+	u8 channel;
+
+	/*
+	 * 0 - 2.4 Ghz
+	 * 1 - 5 Ghz
+	 */
+	u8 band;
+
+	s8 rssi; /* in dB */
+	u8 rcpi; /* in dB */
+	u8 snr; /* in dB */
+} __attribute__ ((packed));
+
+void wl12xx_rx(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
new file mode 100644
index 00000000000..abdf171a47e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -0,0 +1,358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr)
+{
+	/* If the address is lower than REGISTERS_BASE, it means that this is
+	 * a chip-specific register address, so look it up in the registers
+	 * table */
+	if (addr < REGISTERS_BASE) {
+		/* Make sure we don't go over the table */
+		if (addr >= ACX_REG_TABLE_LEN) {
+			wl12xx_error("address out of range (%d)", addr);
+			return -EINVAL;
+		}
+		addr = wl->chip.acx_reg_table[addr];
+	}
+
+	return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr)
+{
+	return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+
+void wl12xx_spi_reset(struct wl12xx *wl)
+{
+	u8 *cmd;
+	struct spi_transfer t;
+	struct spi_message m;
+
+	cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+	if (!cmd) {
+		wl12xx_error("could not allocate cmd for spi reset");
+		return;
+	}
+
+	memset(&t, 0, sizeof(t));
+	spi_message_init(&m);
+
+	memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+	t.tx_buf = cmd;
+	t.len = WSPI_INIT_CMD_LEN;
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl->spi, &m);
+
+	wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+void wl12xx_spi_init(struct wl12xx *wl)
+{
+	u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+	struct spi_transfer t;
+	struct spi_message m;
+
+	cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+	if (!cmd) {
+		wl12xx_error("could not allocate cmd for spi init");
+		return;
+	}
+
+	memset(crc, 0, sizeof(crc));
+	memset(&t, 0, sizeof(t));
+	spi_message_init(&m);
+
+	/*
+	 * Set WSPI_INIT_COMMAND
+	 * the data is being send from the MSB to LSB
+	 */
+	cmd[2] = 0xff;
+	cmd[3] = 0xff;
+	cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+	cmd[0] = 0;
+	cmd[7] = 0;
+	cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+	cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+	if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+		cmd[5] |=  WSPI_INIT_CMD_DIS_FIXEDBUSY;
+	else
+		cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+	cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+		| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+	crc[0] = cmd[1];
+	crc[1] = cmd[0];
+	crc[2] = cmd[7];
+	crc[3] = cmd[6];
+	crc[4] = cmd[5];
+
+	cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+	cmd[4] |= WSPI_INIT_CMD_END;
+
+	t.tx_buf = cmd;
+	t.len = WSPI_INIT_CMD_LEN;
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl->spi, &m);
+
+	wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * There are two VIRTUAL (SPI) partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory.  This function also makes other checks to
+ * ensure that the partitions are not overlapping.  In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ *                               PHYSICAL address
+ *                                     space
+ *
+ *                                    |    |
+ *                                 ...+----+--> mem_start
+ *          VIRTUAL address     ...   |    |
+ *               space       ...      |    | [PART_0]
+ *                        ...         |    |
+ * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
+ *               |    |         ...   |    |
+ *               |MEM |      ...      |    |
+ *               |    |   ...         |    |
+ *  part_size <--+----+...            |    | {unused area)
+ *               |    |   ...         |    |
+ *               |REG |      ...      |    |
+ *  part_size    |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg_start
+ *  reg_size              ...         |    |
+ *                           ...      |    | [PART_1]
+ *                              ...   |    |
+ *                                 ...+----+--> reg_start + reg_size
+ *                                    |    |
+ *
+ */
+void wl12xx_set_partition(struct wl12xx *wl,
+			  u32 mem_start, u32 mem_size,
+			  u32 reg_start, u32 reg_size)
+{
+	u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)];
+	struct wl12xx_partition *partition;
+	struct spi_transfer t;
+	struct spi_message m;
+	u32 *cmd;
+	size_t len;
+	int addr;
+
+	spi_message_init(&m);
+	memset(&t, 0, sizeof(t));
+	memset(tx_buf, 0, sizeof(tx_buf));
+
+	cmd = (u32 *) tx_buf;
+	partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32));
+	addr = HW_ACCESS_PART0_SIZE_ADDR;
+	len = 2 * sizeof(struct wl12xx_partition);
+
+	*cmd |= WSPI_CMD_WRITE;
+	*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	*cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+		     mem_start, mem_size);
+	wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+		     reg_start, reg_size);
+
+	/* Make sure that the two partitions together don't exceed the
+	 * address range */
+	if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+		wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+			     " address range.  Truncating partition[0].");
+		mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+		wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	}
+
+	if ((mem_start < reg_start) &&
+	    ((mem_start + mem_size) > reg_start)) {
+		/* Guarantee that the memory partition doesn't overlap the
+		 * registers partition */
+		wl12xx_debug(DEBUG_SPI, "End of partition[0] is "
+			     "overlapping partition[1].  Adjusted.");
+		mem_size = reg_start - mem_start;
+		wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	} else if ((reg_start < mem_start) &&
+		   ((reg_start + reg_size) > mem_start)) {
+		/* Guarantee that the register partition doesn't overlap the
+		 * memory partition */
+		wl12xx_debug(DEBUG_SPI, "End of partition[1] is"
+			     " overlapping partition[0].  Adjusted.");
+		reg_size = mem_start - reg_start;
+		wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	}
+
+	partition[0].start = mem_start;
+	partition[0].size  = mem_size;
+	partition[1].start = reg_start;
+	partition[1].size  = reg_size;
+
+	wl->physical_mem_addr = mem_start;
+	wl->physical_reg_addr = reg_start;
+
+	wl->virtual_mem_addr = 0;
+	wl->virtual_reg_addr = mem_size;
+
+	t.tx_buf = tx_buf;
+	t.len = sizeof(tx_buf);
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl->spi, &m);
+}
+
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf,
+		     size_t len)
+{
+	struct spi_transfer t[3];
+	struct spi_message m;
+	char busy_buf[TNETWIF_READ_OFFSET_BYTES];
+	u32 cmd;
+
+	cmd = 0;
+	cmd |= WSPI_CMD_READ;
+	cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = 4;
+	spi_message_add_tail(&t[0], &m);
+
+	/* Busy and non busy words read */
+	t[1].rx_buf = busy_buf;
+	t[1].len = TNETWIF_READ_OFFSET_BYTES;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = buf;
+	t[2].len = len;
+	spi_message_add_tail(&t[2], &m);
+
+	spi_sync(wl->spi, &m);
+
+	/* FIXME: check busy words */
+
+	wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd));
+	wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf,
+		      size_t len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	u32 cmd;
+
+	cmd = 0;
+	cmd |= WSPI_CMD_WRITE;
+	cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = sizeof(cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	spi_sync(wl->spi, &m);
+
+	wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd));
+	wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf,
+			 size_t len)
+{
+	int physical;
+
+	physical = wl12xx_translate_mem_addr(wl, addr);
+
+	wl12xx_spi_read(wl, physical, buf, len);
+}
+
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf,
+			  size_t len)
+{
+	int physical;
+
+	physical = wl12xx_translate_mem_addr(wl, addr);
+
+	wl12xx_spi_write(wl, physical, buf, len);
+}
+
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr)
+{
+	return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr));
+}
+
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val)
+{
+	wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr)
+{
+	return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr));
+}
+
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val)
+{
+	wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val);
+}
diff --git a/drivers/net/wireless/wl12xx/spi.h b/drivers/net/wireless/wl12xx/spi.h
new file mode 100644
index 00000000000..fd3227e904a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.h
@@ -0,0 +1,109 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_SPI_H__
+#define __WL12XX_SPI_H__
+
+#include "cmd.h"
+#include "acx.h"
+#include "reg.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE		0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE             4
+
+#define HW_ACCESS_PRAM_MAX_RANGE		0x3c000
+
+#define WSPI_CMD_READ                 0x40000000
+#define WSPI_CMD_WRITE                0x00000000
+#define WSPI_CMD_FIXED                0x20000000
+#define WSPI_CMD_BYTE_LENGTH          0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET   17
+#define WSPI_CMD_BYTE_ADDR            0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN       5
+
+#define WSPI_INIT_CMD_START         0x00
+#define WSPI_INIT_CMD_TX            0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT    0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY  0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD           0x40
+#define WSPI_INIT_CMD_IP            0x20
+#define WSPI_INIT_CMD_CS            0x10
+#define WSPI_INIT_CMD_WS            0x08
+#define WSPI_INIT_CMD_WSPI          0x01
+#define WSPI_INIT_CMD_END           0x01
+
+#define WSPI_INIT_CMD_LEN           8
+
+#define TNETWIF_READ_OFFSET_BYTES  8
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+		((TNETWIF_READ_OFFSET_BYTES - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK  0
+
+
+/* Raw target IO, address is not translated */
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+
+/* Memory target IO, address is tranlated to partition 0 */
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr);
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* Registers IO */
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr);
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* INIT and RESET words */
+void wl12xx_spi_reset(struct wl12xx *wl);
+void wl12xx_spi_init(struct wl12xx *wl);
+void wl12xx_set_partition(struct wl12xx *wl,
+			  u32 part_start, u32 part_size,
+			  u32 reg_start,  u32 reg_size);
+
+static inline u32 wl12xx_read32(struct wl12xx *wl, int addr)
+{
+	u32 response;
+
+	wl12xx_spi_read(wl, addr, &response, sizeof(u32));
+
+	return response;
+}
+
+static inline void wl12xx_write32(struct wl12xx *wl, int addr, u32 val)
+{
+	wl12xx_spi_write(wl, addr, &val, sizeof(u32));
+}
+
+#endif /* __WL12XX_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
new file mode 100644
index 00000000000..62145e205a8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -0,0 +1,557 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "tx.h"
+#include "ps.h"
+
+static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
+{
+	int used, data_in_count;
+
+	data_in_count = wl->data_in_count;
+
+	if (data_in_count < data_out_count)
+		/* data_in_count has wrapped */
+		data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+	used = data_in_count - data_out_count;
+
+	WARN_ON(used < 0);
+	WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+	if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+		return true;
+	else
+		return false;
+}
+
+static int wl12xx_tx_path_status(struct wl12xx *wl)
+{
+	u32 status, addr, data_out_count;
+	bool busy;
+
+	addr = wl->data_path->tx_control_addr;
+	status = wl12xx_mem_read32(wl, addr);
+	data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+	busy = wl12xx_tx_double_buffer_busy(wl, data_out_count);
+
+	if (busy)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb)
+{
+	int i;
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		if (wl->tx_frames[i] == NULL) {
+			wl->tx_frames[i] = skb;
+			return i;
+		}
+
+	return -EBUSY;
+}
+
+static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr,
+			      struct ieee80211_tx_info *control, u16 fc)
+{
+	*(u16 *)&tx_hdr->control = 0;
+
+	tx_hdr->control.rate_policy = 0;
+
+	/* 802.11 packets */
+	tx_hdr->control.packet_type = 0;
+
+	if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+		tx_hdr->control.ack_policy = 1;
+
+	tx_hdr->control.tx_complete = 1;
+
+	if ((fc & IEEE80211_FTYPE_DATA) &&
+	    ((fc & IEEE80211_STYPE_QOS_DATA) ||
+	     (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+		tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH      16
+#define MAX_MPDU_SECURITY_LENGTH      16
+#define WLAN_QOS_HDR_LEN              26
+#define MAX_MPDU_HEADER_AND_SECURITY  (MAX_MPDU_SECURITY_LENGTH + \
+				       WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE                 252
+static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+	u16 payload_len, frag_threshold, mem_blocks;
+	u16 num_mpdus, mem_blocks_per_frag;
+
+	frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+	tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+	payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+
+	if (payload_len > frag_threshold) {
+		mem_blocks_per_frag =
+			((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+			 HW_BLOCK_SIZE) + 1;
+		num_mpdus = payload_len / frag_threshold;
+		mem_blocks = num_mpdus * mem_blocks_per_frag;
+		payload_len -= num_mpdus * frag_threshold;
+		num_mpdus++;
+
+	} else {
+		mem_blocks_per_frag = 0;
+		mem_blocks = 0;
+		num_mpdus = 1;
+	}
+
+	mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+	if (num_mpdus > 1)
+		mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+	tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
+			      struct ieee80211_tx_info *control)
+{
+	struct tx_double_buffer_desc *tx_hdr;
+	struct ieee80211_rate *rate;
+	int id;
+	u16 fc;
+
+	if (!skb)
+		return -EINVAL;
+
+	id = wl12xx_tx_id(wl, skb);
+	if (id < 0)
+		return id;
+
+	fc = *(u16 *)skb->data;
+	tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+							   sizeof(*tx_hdr));
+
+	tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+	rate = ieee80211_get_tx_rate(wl->hw, control);
+	tx_hdr->rate = cpu_to_le16(rate->hw_value);
+	tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+	tx_hdr->id = id;
+
+	/* FIXME: how to get the correct queue id? */
+	tx_hdr->xmit_queue = 0;
+
+	wl12xx_tx_control(tx_hdr, control, fc);
+	wl12xx_tx_frag_block_num(tx_hdr);
+
+	return 0;
+}
+
+/* We copy the packet to the target */
+static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
+				 struct ieee80211_tx_info *control)
+{
+	struct tx_double_buffer_desc *tx_hdr;
+	int len;
+	u32 addr;
+
+	if (!skb)
+		return -EINVAL;
+
+	tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+	if (control->control.hw_key &&
+	    control->control.hw_key->alg == ALG_TKIP) {
+		int hdrlen;
+		u16 fc;
+		u8 *pos;
+
+		fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
+		tx_hdr->length += WL12XX_TKIP_IV_SPACE;
+
+		hdrlen = ieee80211_hdrlen(fc);
+
+		pos = skb_push(skb, WL12XX_TKIP_IV_SPACE);
+		memmove(pos, pos + WL12XX_TKIP_IV_SPACE,
+			sizeof(*tx_hdr) + hdrlen);
+	}
+
+	/* Revisit. This is a workaround for getting non-aligned packets.
+	   This happens at least with EAPOL packets from the user space.
+	   Our DMA requires packets to be aligned on a 4-byte boundary.
+	*/
+	if (unlikely((long)skb->data & 0x03)) {
+		int offset = (4 - (long)skb->data) & 0x03;
+		wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
+
+		/* check whether the current skb can be used */
+		if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+			unsigned char *src = skb->data;
+
+			/* align the buffer on a 4-byte boundary */
+			skb_reserve(skb, offset);
+			memmove(skb->data, src, skb->len);
+		} else {
+			wl12xx_info("No handler, fixme!");
+			return -EINVAL;
+		}
+	}
+
+	/* Our skb->data at this point includes the HW header */
+	len = WL12XX_TX_ALIGN(skb->len);
+
+	if (wl->data_in_count & 0x1)
+		addr = wl->data_path->tx_packet_ring_addr +
+			wl->data_path->tx_packet_ring_chunk_size;
+	else
+		addr = wl->data_path->tx_packet_ring_addr;
+
+	wl12xx_spi_mem_write(wl, addr, skb->data, len);
+
+	wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
+		     tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+
+	return 0;
+}
+
+static void wl12xx_tx_trigger(struct wl12xx *wl)
+{
+	u32 data, addr;
+
+	if (wl->data_in_count & 0x1) {
+		addr = ACX_REG_INTERRUPT_TRIG_H;
+		data = INTR_TRIG_TX_PROC1;
+	} else {
+		addr = ACX_REG_INTERRUPT_TRIG;
+		data = INTR_TRIG_TX_PROC0;
+	}
+
+	wl12xx_reg_write32(wl, addr, data);
+
+	/* Bumping data in */
+	wl->data_in_count = (wl->data_in_count + 1) &
+		TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info;
+	int ret = 0;
+	u8 idx;
+
+	info = IEEE80211_SKB_CB(skb);
+
+	if (info->control.hw_key) {
+		idx = info->control.hw_key->hw_key_idx;
+		if (unlikely(wl->default_key != idx)) {
+			ret = wl12xx_acx_default_key(wl, idx);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	ret = wl12xx_tx_path_status(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_tx_fill_hdr(wl, skb, info);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_tx_send_packet(wl, skb, info);
+	if (ret < 0)
+		return ret;
+
+	wl12xx_tx_trigger(wl);
+
+	return ret;
+}
+
+void wl12xx_tx_work(struct work_struct *work)
+{
+	struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
+	struct sk_buff *skb;
+	bool woken_up = false;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL12XX_STATE_OFF))
+		goto out;
+
+	while ((skb = skb_dequeue(&wl->tx_queue))) {
+		if (!woken_up) {
+			wl12xx_ps_elp_wakeup(wl);
+			woken_up = true;
+		}
+
+		ret = wl12xx_tx_frame(wl, skb);
+		if (ret == -EBUSY) {
+			/* firmware buffer is full, stop queues */
+			wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
+				     "stop queues");
+			ieee80211_stop_queues(wl->hw);
+			wl->tx_queue_stopped = true;
+			skb_queue_head(&wl->tx_queue, skb);
+			goto out;
+		} else if (ret < 0) {
+			dev_kfree_skb(skb);
+			goto out;
+		}
+	}
+
+out:
+	if (woken_up)
+		wl12xx_ps_elp_sleep(wl);
+
+	mutex_unlock(&wl->mutex);
+}
+
+static const char *wl12xx_tx_parse_status(u8 status)
+{
+	/* 8 bit status field, one character per bit plus null */
+	static char buf[9];
+	int i = 0;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (status & TX_DMA_ERROR)
+		buf[i++] = 'm';
+	if (status & TX_DISABLED)
+		buf[i++] = 'd';
+	if (status & TX_RETRY_EXCEEDED)
+		buf[i++] = 'r';
+	if (status & TX_TIMEOUT)
+		buf[i++] = 't';
+	if (status & TX_KEY_NOT_FOUND)
+		buf[i++] = 'k';
+	if (status & TX_ENCRYPT_FAIL)
+		buf[i++] = 'e';
+	if (status & TX_UNAVAILABLE_PRIORITY)
+		buf[i++] = 'p';
+
+	/* bit 0 is unused apparently */
+
+	return buf;
+}
+
+static void wl12xx_tx_packet_cb(struct wl12xx *wl,
+				struct tx_result *result)
+{
+	struct ieee80211_tx_info *info;
+	struct sk_buff *skb;
+	int hdrlen, ret;
+	u8 *frame;
+
+	skb = wl->tx_frames[result->id];
+	if (skb == NULL) {
+		wl12xx_error("SKB for packet %d is NULL", result->id);
+		return;
+	}
+
+	info = IEEE80211_SKB_CB(skb);
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	    (result->status == TX_SUCCESS))
+		info->flags |= IEEE80211_TX_STAT_ACK;
+
+	info->status.rates[0].count = result->ack_failures + 1;
+	wl->stats.retry_count += result->ack_failures;
+
+	/*
+	 * We have to remove our private TX header before pushing
+	 * the skb back to mac80211.
+	 */
+	frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+	if (info->control.hw_key &&
+	    info->control.hw_key->alg == ALG_TKIP) {
+		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+		memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen);
+		skb_pull(skb, WL12XX_TKIP_IV_SPACE);
+	}
+
+	wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+		     " status 0x%x (%s)",
+		     result->id, skb, result->ack_failures, result->rate,
+		     result->status, wl12xx_tx_parse_status(result->status));
+
+
+	ieee80211_tx_status(wl->hw, skb);
+
+	wl->tx_frames[result->id] = NULL;
+
+	if (wl->tx_queue_stopped) {
+		wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
+
+		skb = skb_dequeue(&wl->tx_queue);
+
+		/* The skb can be NULL because tx_work might have been
+		   scheduled before the queue was stopped making the
+		   queue empty */
+
+		if (skb) {
+			ret = wl12xx_tx_frame(wl, skb);
+			if (ret == -EBUSY) {
+				/* firmware buffer is still full */
+				wl12xx_debug(DEBUG_TX, "cb: fw buffer "
+					     "still full");
+				skb_queue_head(&wl->tx_queue, skb);
+				return;
+			} else if (ret < 0) {
+				dev_kfree_skb(skb);
+				return;
+			}
+		}
+
+		wl12xx_debug(DEBUG_TX, "cb: waking queues");
+		ieee80211_wake_queues(wl->hw);
+		wl->tx_queue_stopped = false;
+	}
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl12xx_tx_complete(struct wl12xx *wl)
+{
+	int i, result_index, num_complete = 0;
+	struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+
+	if (unlikely(wl->state != WL12XX_STATE_ON))
+		return;
+
+	/* First we read the result */
+	wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
+			    result, sizeof(result));
+
+	result_index = wl->next_tx_complete;
+
+	for (i = 0; i < ARRAY_SIZE(result); i++) {
+		result_ptr = &result[result_index];
+
+		if (result_ptr->done_1 == 1 &&
+		    result_ptr->done_2 == 1) {
+			wl12xx_tx_packet_cb(wl, result_ptr);
+
+			result_ptr->done_1 = 0;
+			result_ptr->done_2 = 0;
+
+			result_index = (result_index + 1) &
+				(FW_TX_CMPLT_BLOCK_SIZE - 1);
+			num_complete++;
+		} else {
+			break;
+		}
+	}
+
+	/* Every completed frame needs to be acknowledged */
+	if (num_complete) {
+		/*
+		 * If we've wrapped, we have to clear
+		 * the results in 2 steps.
+		 */
+		if (result_index > wl->next_tx_complete) {
+			/* Only 1 write is needed */
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr +
+					     (wl->next_tx_complete *
+					      sizeof(struct tx_result)),
+					     &result[wl->next_tx_complete],
+					     num_complete *
+					     sizeof(struct tx_result));
+
+
+		} else if (result_index < wl->next_tx_complete) {
+			/* 2 writes are needed */
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr +
+					     (wl->next_tx_complete *
+					      sizeof(struct tx_result)),
+					     &result[wl->next_tx_complete],
+					     (FW_TX_CMPLT_BLOCK_SIZE -
+					      wl->next_tx_complete) *
+					     sizeof(struct tx_result));
+
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr,
+					     result,
+					     (num_complete -
+					      FW_TX_CMPLT_BLOCK_SIZE +
+					      wl->next_tx_complete) *
+					     sizeof(struct tx_result));
+
+		} else {
+			/* We have to write the whole array */
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr,
+					     result,
+					     FW_TX_CMPLT_BLOCK_SIZE *
+					     sizeof(struct tx_result));
+		}
+
+	}
+
+	wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl12xx_tx_flush(struct wl12xx *wl)
+{
+	int i;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *info;
+
+	/* TX failure */
+/* 	control->flags = 0; FIXME */
+
+	while ((skb = skb_dequeue(&wl->tx_queue))) {
+		info = IEEE80211_SKB_CB(skb);
+
+		wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+		if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+				continue;
+
+		ieee80211_tx_status(wl->hw, skb);
+	}
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		if (wl->tx_frames[i] != NULL) {
+			skb = wl->tx_frames[i];
+			info = IEEE80211_SKB_CB(skb);
+
+			if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+				continue;
+
+			ieee80211_tx_status(wl->hw, skb);
+			wl->tx_frames[i] = NULL;
+		}
+}
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
new file mode 100644
index 00000000000..dc82691f4c1
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -0,0 +1,215 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_TX_H__
+#define __WL12XX_TX_H__
+
+#include <linux/bitops.h>
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ *    i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ *    buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ *    i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ *    buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ *    the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ *    transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ *    and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ *    host to process the new data. Note: interrupt will be send per packet if
+ *    TX complete indication was requested in tx_control or per crossing
+ *    aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ *    TxDescriptorDone information in a cyclic manner and clears both done_1
+ *    and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT	0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK   0xf
+#define WL12XX_TX_ALIGN_TO 4
+#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \
+			     ~(WL12XX_TX_ALIGN_TO - 1))
+#define WL12XX_TKIP_IV_SPACE 4
+
+struct tx_control {
+	/* Rate Policy (class) index */
+	unsigned rate_policy:3;
+
+	/* When set, no ack policy is expected */
+	unsigned ack_policy:1;
+
+	/*
+	 * Packet type:
+	 * 0 -> 802.11
+	 * 1 -> 802.3
+	 * 2 -> IP
+	 * 3 -> raw codec
+	 */
+	unsigned packet_type:2;
+
+	/* If set, this is a QoS-Null or QoS-Data frame */
+	unsigned qos:1;
+
+	/*
+	 * If set, the target triggers the tx complete INT
+	 * upon frame sending completion.
+	 */
+	unsigned tx_complete:1;
+
+	/* 2 bytes padding before packet header */
+	unsigned xfer_pad:1;
+
+	unsigned reserved:7;
+} __attribute__ ((packed));
+
+
+struct tx_double_buffer_desc {
+	/* Length of payload, including headers. */
+	u16 length;
+
+	/*
+	 * A bit mask that specifies the initial rate to be used
+	 * Possible values are:
+	 * 0x0001 - 1Mbits
+	 * 0x0002 - 2Mbits
+	 * 0x0004 - 5.5Mbits
+	 * 0x0008 - 6Mbits
+	 * 0x0010 - 9Mbits
+	 * 0x0020 - 11Mbits
+	 * 0x0040 - 12Mbits
+	 * 0x0080 - 18Mbits
+	 * 0x0100 - 22Mbits
+	 * 0x0200 - 24Mbits
+	 * 0x0400 - 36Mbits
+	 * 0x0800 - 48Mbits
+	 * 0x1000 - 54Mbits
+	 */
+	u16 rate;
+
+	/* Time in us that a packet can spend in the target */
+	u32 expiry_time;
+
+	/* index of the TX queue used for this packet */
+	u8 xmit_queue;
+
+	/* Used to identify a packet */
+	u8 id;
+
+	struct tx_control control;
+
+	/*
+	 * The FW should cut the packet into fragments
+	 * of this size.
+	 */
+	u16 frag_threshold;
+
+	/* Numbers of HW queue blocks to be allocated */
+	u8 num_mem_blocks;
+
+	u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+	TX_SUCCESS              = 0,
+	TX_DMA_ERROR            = BIT(7),
+	TX_DISABLED             = BIT(6),
+	TX_RETRY_EXCEEDED       = BIT(5),
+	TX_TIMEOUT              = BIT(4),
+	TX_KEY_NOT_FOUND        = BIT(3),
+	TX_ENCRYPT_FAIL         = BIT(2),
+	TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+	/*
+	 * Ownership synchronization between the host and
+	 * the firmware. If done_1 and done_2 are cleared,
+	 * owned by the FW (no info ready).
+	 */
+	u8 done_1;
+
+	/* same as double_buffer_desc->id */
+	u8 id;
+
+	/*
+	 * Total air access duration consumed by this
+	 * packet, including all retries and overheads.
+	 */
+	u16 medium_usage;
+
+	/* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+	u32 medium_delay;
+
+	/* Time between host xfer and tx complete */
+	u32 fw_hnadling_time;
+
+	/* The LS-byte of the last TKIP sequence number. */
+	u8 lsb_seq_num;
+
+	/* Retry count */
+	u8 ack_failures;
+
+	/* At which rate we got a ACK */
+	u16 rate;
+
+	u16 reserved;
+
+	/* TX_* */
+	u8 status;
+
+	/* See done_1 */
+	u8 done_2;
+} __attribute__ ((packed));
+
+void wl12xx_tx_work(struct work_struct *work);
+void wl12xx_tx_complete(struct wl12xx *wl);
+void wl12xx_tx_flush(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
new file mode 100644
index 00000000000..ce1561a41fa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.c
@@ -0,0 +1,709 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "spi.h"
+#include "boot.h"
+#include "event.h"
+#include "acx.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+
+static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = {
+	[PART_DOWN] = {
+		.mem = {
+			.start = 0x00000000,
+			.size  = 0x00016800
+		},
+		.reg = {
+			.start = REGISTERS_BASE,
+			.size  = REGISTERS_DOWN_SIZE
+		},
+	},
+
+	[PART_WORK] = {
+		.mem = {
+			.start = 0x00028000,
+			.size  = 0x00014000
+		},
+		.reg = {
+			.start = REGISTERS_BASE,
+			.size  = REGISTERS_WORK_SIZE
+		},
+	},
+
+	/* WL1251 doesn't use the DRPW partition, so we don't set it here */
+};
+
+static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
+	[ACX_REG_INTERRUPT_TRIG]     = (REGISTERS_BASE + 0x0474),
+	[ACX_REG_INTERRUPT_TRIG_H]   = (REGISTERS_BASE + 0x0478),
+	[ACX_REG_INTERRUPT_MASK]     = (REGISTERS_BASE + 0x0494),
+	[ACX_REG_HINT_MASK_SET]      = (REGISTERS_BASE + 0x0498),
+	[ACX_REG_HINT_MASK_CLR]      = (REGISTERS_BASE + 0x049C),
+	[ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+	[ACX_REG_INTERRUPT_CLEAR]    = (REGISTERS_BASE + 0x04A4),
+	[ACX_REG_INTERRUPT_ACK]      = (REGISTERS_BASE + 0x04A8),
+	[ACX_REG_SLV_SOFT_RESET]     = (REGISTERS_BASE + 0x0000),
+	[ACX_REG_EE_START]           = (REGISTERS_BASE + 0x080C),
+	[ACX_REG_ECPU_CONTROL]       = (REGISTERS_BASE + 0x0804)
+};
+
+static int wl1251_upload_firmware(struct wl12xx *wl)
+{
+	struct wl12xx_partition_set *p_table = wl->chip.p_table;
+	int addr, chunk_num, partition_limit;
+	size_t fw_data_len;
+	u8 *p;
+
+	/* whal_FwCtrl_LoadFwImageSm() */
+
+	wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+		     wl12xx_reg_read32(wl, CHIP_ID_B));
+
+	/* 10.0 check firmware length and set partition */
+	fw_data_len =  (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+		(wl->fw[6] << 8) | (wl->fw[7]);
+
+	wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
+		CHUNK_SIZE);
+
+	if ((fw_data_len % 4) != 0) {
+		wl12xx_error("firmware length not multiple of four");
+		return -EIO;
+	}
+
+	wl12xx_set_partition(wl,
+			     p_table[PART_DOWN].mem.start,
+			     p_table[PART_DOWN].mem.size,
+			     p_table[PART_DOWN].reg.start,
+			     p_table[PART_DOWN].reg.size);
+
+	/* 10.1 set partition limit and chunk num */
+	chunk_num = 0;
+	partition_limit = p_table[PART_DOWN].mem.size;
+
+	while (chunk_num < fw_data_len / CHUNK_SIZE) {
+		/* 10.2 update partition, if needed */
+		addr = p_table[PART_DOWN].mem.start +
+			(chunk_num + 2) * CHUNK_SIZE;
+		if (addr > partition_limit) {
+			addr = p_table[PART_DOWN].mem.start +
+				chunk_num * CHUNK_SIZE;
+			partition_limit = chunk_num * CHUNK_SIZE +
+				p_table[PART_DOWN].mem.size;
+			wl12xx_set_partition(wl,
+					     addr,
+					     p_table[PART_DOWN].mem.size,
+					     p_table[PART_DOWN].reg.start,
+					     p_table[PART_DOWN].reg.size);
+		}
+
+		/* 10.3 upload the chunk */
+		addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+		p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+		wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+			     p, addr);
+		wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+
+		chunk_num++;
+	}
+
+	/* 10.4 upload the last chunk */
+	addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+	p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+	wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
+		     fw_data_len % CHUNK_SIZE, p, addr);
+	wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+	return 0;
+}
+
+static int wl1251_upload_nvs(struct wl12xx *wl)
+{
+	size_t nvs_len, nvs_bytes_written, burst_len;
+	int nvs_start, i;
+	u32 dest_addr, val;
+	u8 *nvs_ptr, *nvs;
+
+	nvs = wl->nvs;
+	if (nvs == NULL)
+		return -ENODEV;
+
+	nvs_ptr = nvs;
+
+	nvs_len = wl->nvs_len;
+	nvs_start = wl->fw_len;
+
+	/*
+	 * Layout before the actual NVS tables:
+	 * 1 byte : burst length.
+	 * 2 bytes: destination address.
+	 * n bytes: data to burst copy.
+	 *
+	 * This is ended by a 0 length, then the NVS tables.
+	 */
+
+	while (nvs_ptr[0]) {
+		burst_len = nvs_ptr[0];
+		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+		/* We move our pointer to the data */
+		nvs_ptr += 3;
+
+		for (i = 0; i < burst_len; i++) {
+			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+			wl12xx_debug(DEBUG_BOOT,
+				     "nvs burst write 0x%x: 0x%x",
+				     dest_addr, val);
+			wl12xx_mem_write32(wl, dest_addr, val);
+
+			nvs_ptr += 4;
+			dest_addr += 4;
+		}
+	}
+
+	/*
+	 * We've reached the first zero length, the first NVS table
+	 * is 7 bytes further.
+	 */
+	nvs_ptr += 7;
+	nvs_len -= nvs_ptr - nvs;
+	nvs_len = ALIGN(nvs_len, 4);
+
+	/* Now we must set the partition correctly */
+	wl12xx_set_partition(wl, nvs_start,
+			     wl->chip.p_table[PART_DOWN].mem.size,
+			     wl->chip.p_table[PART_DOWN].reg.start,
+			     wl->chip.p_table[PART_DOWN].reg.size);
+
+	/* And finally we upload the NVS tables */
+	nvs_bytes_written = 0;
+	while (nvs_bytes_written < nvs_len) {
+		val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+		       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+		val = cpu_to_le32(val);
+
+		wl12xx_debug(DEBUG_BOOT,
+			     "nvs write table 0x%x: 0x%x",
+			     nvs_start, val);
+		wl12xx_mem_write32(wl, nvs_start, val);
+
+		nvs_ptr += 4;
+		nvs_bytes_written += 4;
+		nvs_start += 4;
+	}
+
+	return 0;
+}
+
+static int wl1251_boot(struct wl12xx *wl)
+{
+	int ret = 0, minor_minor_e2_ver;
+	u32 tmp, boot_data;
+
+	ret = wl12xx_boot_soft_reset(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 2. start processing NVS file */
+	ret = wl->chip.op_upload_nvs(wl);
+	if (ret < 0)
+		goto out;
+
+	/* write firmware's last address (ie. it's length) to
+	 * ACX_EEPROMLESS_IND_REG */
+	wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+
+	/* 6. read the EEPROM parameters */
+	tmp = wl12xx_reg_read32(wl, SCR_PAD2);
+
+	/* 7. read bootdata */
+	wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+	wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+	tmp = wl12xx_reg_read32(wl, SCR_PAD3);
+
+	/* 8. check bootdata and call restart sequence */
+	wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+	minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+	wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+		     "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+		     wl->boot_attr.radio_type, wl->boot_attr.major,
+		     wl->boot_attr.minor, minor_minor_e2_ver);
+
+	ret = wl12xx_boot_init_seq(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 9. NVS processing done */
+	boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+	/* 10. check that ECPU_CONTROL_HALT bits are set in
+	 * pWhalBus->uBootData and start uploading firmware
+	 */
+	if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+		wl12xx_error("boot failed, ECPU_CONTROL_HALT not set");
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = wl->chip.op_upload_fw(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 10.5 start firmware */
+	ret = wl12xx_boot_run_firmware(wl);
+	if (ret < 0)
+		goto out;
+
+	/* Get and save the firmware version */
+	wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
+
+out:
+	return ret;
+}
+
+static int wl1251_mem_cfg(struct wl12xx *wl)
+{
+	struct wl1251_acx_config_memory mem_conf;
+	int ret, i;
+
+	wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg");
+
+	/* memory config */
+	mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+	mem_conf.mem_config.rx_mem_block_num = 35;
+	mem_conf.mem_config.tx_min_mem_block_num = 64;
+	mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES;
+	mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING;
+	mem_conf.mem_config.num_ssid_profiles = 1;
+	mem_conf.mem_config.debug_buffer_size =
+		cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+	/* RX queue config */
+	mem_conf.rx_queue_config.dma_address = 0;
+	mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+	mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+	mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+	/* TX queue config */
+	for (i = 0; i < MAX_TX_QUEUES; i++) {
+		mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+		mem_conf.tx_queue_config[i].attributes = i;
+	}
+
+	mem_conf.header.id = ACX_MEM_CFG;
+	mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) -
+		sizeof(struct acx_header);
+	mem_conf.header.len -=
+		(MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) *
+		sizeof(struct wl1251_acx_tx_queue_config);
+
+	ret = wl12xx_cmd_configure(wl, &mem_conf,
+				   sizeof(struct wl1251_acx_config_memory));
+	if (ret < 0)
+		wl12xx_warning("wl1251 mem config failed: %d", ret);
+
+	return ret;
+}
+
+static int wl1251_hw_init_mem_config(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl1251_mem_cfg(wl);
+	if (ret < 0)
+		return ret;
+
+	wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+					  GFP_KERNEL);
+	if (!wl->target_mem_map) {
+		wl12xx_error("couldn't allocate target memory map");
+		return -ENOMEM;
+	}
+
+	/* we now ask for the firmware built memory map */
+	ret = wl12xx_acx_mem_map(wl, wl->target_mem_map,
+				 sizeof(struct wl1251_acx_mem_map));
+	if (ret < 0) {
+		wl12xx_error("couldn't retrieve firmware memory map");
+		kfree(wl->target_mem_map);
+		wl->target_mem_map = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag)
+{
+	u32 cpu_ctrl;
+
+	/* 10.5.0 run the firmware (I) */
+	cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	/* 10.5.1 run the firmware (II) */
+	cpu_ctrl &= ~flag;
+	wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static void wl1251_target_enable_interrupts(struct wl12xx *wl)
+{
+	/* Enable target's interrupts */
+	wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+		WL1251_ACX_INTR_RX1_DATA |
+		WL1251_ACX_INTR_TX_RESULT |
+		WL1251_ACX_INTR_EVENT_A |
+		WL1251_ACX_INTR_EVENT_B |
+		WL1251_ACX_INTR_INIT_COMPLETE;
+	wl12xx_boot_target_enable_interrupts(wl);
+}
+
+static void wl1251_irq_work(struct work_struct *work)
+{
+	u32 intr;
+	struct wl12xx *wl =
+		container_of(work, struct wl12xx, irq_work);
+
+	mutex_lock(&wl->mutex);
+
+	wl12xx_debug(DEBUG_IRQ, "IRQ work");
+
+	if (wl->state == WL12XX_STATE_OFF)
+		goto out;
+
+	wl12xx_ps_elp_wakeup(wl);
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+	intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+	if (wl->data_path) {
+		wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr,
+				    &wl->rx_counter, sizeof(u32));
+
+		/* We handle a frmware bug here */
+		switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+		case 0:
+			wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync");
+			intr &= ~WL1251_ACX_INTR_RX0_DATA;
+			intr &= ~WL1251_ACX_INTR_RX1_DATA;
+			break;
+		case 1:
+			wl12xx_debug(DEBUG_IRQ, "RX: FW +1");
+			intr |= WL1251_ACX_INTR_RX0_DATA;
+			intr &= ~WL1251_ACX_INTR_RX1_DATA;
+			break;
+		case 2:
+			wl12xx_debug(DEBUG_IRQ, "RX: FW +2");
+			intr |= WL1251_ACX_INTR_RX0_DATA;
+			intr |= WL1251_ACX_INTR_RX1_DATA;
+			break;
+		default:
+			wl12xx_warning("RX: FW and host out of sync: %d",
+				       wl->rx_counter - wl->rx_handled);
+			break;
+		}
+
+		wl->rx_handled = wl->rx_counter;
+
+
+		wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
+	}
+
+	intr &= wl->intr_mask;
+
+	if (intr == 0) {
+		wl12xx_debug(DEBUG_IRQ, "INTR is 0");
+		wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+				   ~(wl->intr_mask));
+
+		goto out_sleep;
+	}
+
+	if (intr & WL1251_ACX_INTR_RX0_DATA) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+		wl12xx_rx(wl);
+	}
+
+	if (intr & WL1251_ACX_INTR_RX1_DATA) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+		wl12xx_rx(wl);
+	}
+
+	if (intr & WL1251_ACX_INTR_TX_RESULT) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+		wl12xx_tx_complete(wl);
+	}
+
+	if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
+		if (intr & WL1251_ACX_INTR_EVENT_A)
+			wl12xx_event_handle(wl, 0);
+		else
+			wl12xx_event_handle(wl, 1);
+	}
+
+	if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+
+out_sleep:
+	wl12xx_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+				   struct acx_tx_queue_qos_config *config,
+				   u32 num_blocks)
+{
+	config->qid = qid;
+
+	switch (qid) {
+	case QOS_AC_BE:
+		config->high_threshold =
+			(QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_BK:
+		config->high_threshold =
+			(QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_VI:
+		config->high_threshold =
+			(QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_VO:
+		config->high_threshold =
+			(QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+		break;
+	default:
+		wl12xx_error("Invalid TX queue id: %d", qid);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl)
+{
+	struct acx_tx_queue_qos_config config;
+	struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+	int ret, i;
+
+	wl12xx_debug(DEBUG_ACX, "acx tx queue config");
+
+	config.header.id = ACX_TX_QUEUE_CFG;
+	config.header.len = sizeof(struct acx_tx_queue_qos_config) -
+		sizeof(struct acx_header);
+
+	for (i = 0; i < MAX_NUM_OF_AC; i++) {
+		ret = wl1251_hw_init_txq_fill(i, &config,
+					      wl_mem_map->num_tx_mem_blocks);
+		if (ret < 0)
+			return ret;
+
+		ret = wl12xx_cmd_configure(wl, &config, sizeof(config));
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl12xx *wl)
+{
+	int ret;
+
+	/* asking for the data path parameters */
+	wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+				GFP_KERNEL);
+	if (!wl->data_path) {
+		wl12xx_error("Couldnt allocate data path parameters");
+		return -ENOMEM;
+	}
+
+	ret = wl12xx_acx_data_path_params(wl, wl->data_path);
+	if (ret < 0) {
+		kfree(wl->data_path);
+		wl->data_path = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init(struct wl12xx *wl)
+{
+	struct wl1251_acx_mem_map *wl_mem_map;
+	int ret;
+
+	ret = wl12xx_hw_init_hwenc_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Template settings */
+	ret = wl12xx_hw_init_templates_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Default memory configuration */
+	ret = wl1251_hw_init_mem_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Default data path configuration  */
+	ret = wl1251_hw_init_data_path_config(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* RX config */
+	ret = wl12xx_hw_init_rx_config(wl,
+				       RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+				       RX_FILTER_OPTION_DEF);
+	/* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+	   RX_FILTER_OPTION_FILTER_ALL); */
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* TX queues config */
+	ret = wl1251_hw_init_tx_queue_config(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* PHY layer config */
+	ret = wl12xx_hw_init_phy_config(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Beacon filtering */
+	ret = wl12xx_hw_init_beacon_filter(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Bluetooth WLAN coexistence */
+	ret = wl12xx_hw_init_pta(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Energy detection */
+	ret = wl12xx_hw_init_energy_detection(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Beacons and boradcast settings */
+	ret = wl12xx_hw_init_beacon_broadcast(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Enable data path */
+	ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Default power state */
+	ret = wl12xx_hw_init_power_auth(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	wl_mem_map = wl->target_mem_map;
+	wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+		    wl_mem_map->num_tx_mem_blocks,
+		    wl->data_path->tx_control_addr,
+		    wl_mem_map->num_rx_mem_blocks,
+		    wl->data_path->rx_control_addr);
+
+	return 0;
+
+ out_free_data_path:
+	kfree(wl->data_path);
+
+ out_free_memmap:
+	kfree(wl->target_mem_map);
+
+	return ret;
+}
+
+static int wl1251_plt_init(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl1251_hw_init_mem_config(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void wl1251_setup(struct wl12xx *wl)
+{
+	/* FIXME: Is it better to use strncpy here or is this ok? */
+	wl->chip.fw_filename = WL1251_FW_NAME;
+	wl->chip.nvs_filename = WL1251_NVS_NAME;
+
+	/* Now we know what chip we're using, so adjust the power on sleep
+	 * time accordingly */
+	wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
+
+	wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
+	wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
+
+	wl->chip.op_upload_nvs = wl1251_upload_nvs;
+	wl->chip.op_upload_fw = wl1251_upload_firmware;
+	wl->chip.op_boot = wl1251_boot;
+	wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
+	wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
+	wl->chip.op_hw_init = wl1251_hw_init;
+	wl->chip.op_plt_init = wl1251_plt_init;
+
+	wl->chip.p_table = wl1251_part_table;
+	wl->chip.acx_reg_table = wl1251_acx_reg_table;
+
+	INIT_WORK(&wl->irq_work, wl1251_irq_work);
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
new file mode 100644
index 00000000000..1f4a4433039
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -0,0 +1,165 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_H__
+#define __WL1251_H__
+
+#include <linux/bitops.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+
+void wl1251_setup(struct wl12xx *wl);
+
+
+struct wl1251_acx_memory {
+	__le16 num_stations; /* number of STAs to be supported. */
+	u16 reserved_1;
+
+	/*
+	 * Nmber of memory buffers for the RX mem pool.
+	 * The actual number may be less if there are
+	 * not enough blocks left for the minimum num
+	 * of TX ones.
+	 */
+	u8 rx_mem_block_num;
+	u8 reserved_2;
+	u8 num_tx_queues; /* From 1 to 16 */
+	u8 host_if_options; /* HOST_IF* */
+	u8 tx_min_mem_block_num;
+	u8 num_ssid_profiles;
+	__le16 debug_buffer_size;
+} __attribute__ ((packed));
+
+
+#define ACX_RX_DESC_MIN                1
+#define ACX_RX_DESC_MAX                127
+#define ACX_RX_DESC_DEF                32
+struct wl1251_acx_rx_queue_config {
+	u8 num_descs;
+	u8 pad;
+	u8 type;
+	u8 priority;
+	__le32 dma_address;
+} __attribute__ ((packed));
+
+#define ACX_TX_DESC_MIN                1
+#define ACX_TX_DESC_MAX                127
+#define ACX_TX_DESC_DEF                16
+struct wl1251_acx_tx_queue_config {
+    u8 num_descs;
+    u8 pad[2];
+    u8 attributes;
+} __attribute__ ((packed));
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+	struct acx_header header;
+
+	struct wl1251_acx_memory mem_config;
+	struct wl1251_acx_rx_queue_config rx_queue_config;
+	struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __attribute__ ((packed));
+
+struct wl1251_acx_mem_map {
+	struct acx_header header;
+
+	void *code_start;
+	void *code_end;
+
+	void *wep_defkey_start;
+	void *wep_defkey_end;
+
+	void *sta_table_start;
+	void *sta_table_end;
+
+	void *packet_template_start;
+	void *packet_template_end;
+
+	void *queue_memory_start;
+	void *queue_memory_end;
+
+	void *packet_memory_pool_start;
+	void *packet_memory_pool_end;
+
+	void *debug_buffer1_start;
+	void *debug_buffer1_end;
+
+	void *debug_buffer2_start;
+	void *debug_buffer2_end;
+
+	/* Number of blocks FW allocated for TX packets */
+	u32 num_tx_mem_blocks;
+
+	/* Number of blocks FW allocated for RX packets */
+	u32 num_rx_mem_blocks;
+} __attribute__ ((packed));
+
+/*************************************************************************
+
+    Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA      BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT	BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR		BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA	BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A		BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B		BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST	BIT(6)
+
+/* Trace meassge on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A		BIT(7)
+
+/* Trace meassge on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B		BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE	BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE	BIT(14)
+
+#define WL1251_ACX_INTR_ALL           0xFFFFFFFF
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
new file mode 100644
index 00000000000..48641437414
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -0,0 +1,409 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_H__
+#define __WL12XX_H__
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <net/mac80211.h>
+
+#define DRIVER_NAME "wl12xx"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+	DEBUG_NONE	= 0,
+	DEBUG_IRQ	= BIT(0),
+	DEBUG_SPI	= BIT(1),
+	DEBUG_BOOT	= BIT(2),
+	DEBUG_MAILBOX	= BIT(3),
+	DEBUG_NETLINK	= BIT(4),
+	DEBUG_EVENT	= BIT(5),
+	DEBUG_TX	= BIT(6),
+	DEBUG_RX	= BIT(7),
+	DEBUG_SCAN	= BIT(8),
+	DEBUG_CRYPT	= BIT(9),
+	DEBUG_PSM	= BIT(10),
+	DEBUG_MAC80211	= BIT(11),
+	DEBUG_CMD	= BIT(12),
+	DEBUG_ACX	= BIT(13),
+	DEBUG_ALL	= ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl12xx_error(fmt, arg...) \
+	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl12xx_warning(fmt, arg...) \
+	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl12xx_notice(fmt, arg...) \
+	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_info(fmt, arg...) \
+	printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_debug(level, fmt, arg...) \
+	do { \
+		if (level & DEBUG_LEVEL) \
+			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+	} while (0)
+
+#define wl12xx_dump(level, prefix, buf, len)	\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       0);				\
+	} while (0)
+
+#define wl12xx_dump_ascii(level, prefix, buf, len)	\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       true);				\
+	} while (0)
+
+#define WL12XX_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN |	\
+				  CFG_BSSID_FILTER_EN)
+
+#define WL12XX_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN |  \
+				  CFG_RX_MGMT_EN |  \
+				  CFG_RX_DATA_EN |  \
+				  CFG_RX_CTL_EN |   \
+				  CFG_RX_BCN_EN |   \
+				  CFG_RX_AUTH_EN |  \
+				  CFG_RX_ASSOC_EN)
+
+
+struct boot_attr {
+	u32 radio_type;
+	u8 mac_clock;
+	u8 arm_clock;
+	int firmware_debug;
+	u32 minor;
+	u32 major;
+	u32 bugfix;
+};
+
+enum wl12xx_state {
+	WL12XX_STATE_OFF,
+	WL12XX_STATE_ON,
+	WL12XX_STATE_PLT,
+};
+
+enum wl12xx_partition_type {
+	PART_DOWN,
+	PART_WORK,
+	PART_DRPW,
+
+	PART_TABLE_LEN
+};
+
+struct wl12xx_partition {
+	u32 size;
+	u32 start;
+};
+
+struct wl12xx_partition_set {
+	struct wl12xx_partition mem;
+	struct wl12xx_partition reg;
+};
+
+struct wl12xx;
+
+/* FIXME: I'm not sure about this structure name */
+struct wl12xx_chip {
+	u32 id;
+
+	const char *fw_filename;
+	const char *nvs_filename;
+
+	char fw_ver[21];
+
+	unsigned int power_on_sleep;
+	int intr_cmd_complete;
+	int intr_init_complete;
+
+	int (*op_upload_fw)(struct wl12xx *wl);
+	int (*op_upload_nvs)(struct wl12xx *wl);
+	int (*op_boot)(struct wl12xx *wl);
+	void (*op_set_ecpu_ctrl)(struct wl12xx *wl, u32 flag);
+	void (*op_target_enable_interrupts)(struct wl12xx *wl);
+	int (*op_hw_init)(struct wl12xx *wl);
+	int (*op_plt_init)(struct wl12xx *wl);
+
+	struct wl12xx_partition_set *p_table;
+	enum wl12xx_acx_int_reg *acx_reg_table;
+};
+
+struct wl12xx_stats {
+	struct acx_statistics *fw_stats;
+	unsigned long fw_stats_update;
+
+	unsigned int retry_count;
+	unsigned int excessive_retries;
+};
+
+struct wl12xx_debugfs {
+	struct dentry *rootdir;
+	struct dentry *fw_statistics;
+
+	struct dentry *tx_internal_desc_overflow;
+
+	struct dentry *rx_out_of_mem;
+	struct dentry *rx_hdr_overflow;
+	struct dentry *rx_hw_stuck;
+	struct dentry *rx_dropped;
+	struct dentry *rx_fcs_err;
+	struct dentry *rx_xfr_hint_trig;
+	struct dentry *rx_path_reset;
+	struct dentry *rx_reset_counter;
+
+	struct dentry *dma_rx_requested;
+	struct dentry *dma_rx_errors;
+	struct dentry *dma_tx_requested;
+	struct dentry *dma_tx_errors;
+
+	struct dentry *isr_cmd_cmplt;
+	struct dentry *isr_fiqs;
+	struct dentry *isr_rx_headers;
+	struct dentry *isr_rx_mem_overflow;
+	struct dentry *isr_rx_rdys;
+	struct dentry *isr_irqs;
+	struct dentry *isr_tx_procs;
+	struct dentry *isr_decrypt_done;
+	struct dentry *isr_dma0_done;
+	struct dentry *isr_dma1_done;
+	struct dentry *isr_tx_exch_complete;
+	struct dentry *isr_commands;
+	struct dentry *isr_rx_procs;
+	struct dentry *isr_hw_pm_mode_changes;
+	struct dentry *isr_host_acknowledges;
+	struct dentry *isr_pci_pm;
+	struct dentry *isr_wakeups;
+	struct dentry *isr_low_rssi;
+
+	struct dentry *wep_addr_key_count;
+	struct dentry *wep_default_key_count;
+	/* skipping wep.reserved */
+	struct dentry *wep_key_not_found;
+	struct dentry *wep_decrypt_fail;
+	struct dentry *wep_packets;
+	struct dentry *wep_interrupt;
+
+	struct dentry *pwr_ps_enter;
+	struct dentry *pwr_elp_enter;
+	struct dentry *pwr_missing_bcns;
+	struct dentry *pwr_wake_on_host;
+	struct dentry *pwr_wake_on_timer_exp;
+	struct dentry *pwr_tx_with_ps;
+	struct dentry *pwr_tx_without_ps;
+	struct dentry *pwr_rcvd_beacons;
+	struct dentry *pwr_power_save_off;
+	struct dentry *pwr_enable_ps;
+	struct dentry *pwr_disable_ps;
+	struct dentry *pwr_fix_tsf_ps;
+	/* skipping cont_miss_bcns_spread for now */
+	struct dentry *pwr_rcvd_awake_beacons;
+
+	struct dentry *mic_rx_pkts;
+	struct dentry *mic_calc_failure;
+
+	struct dentry *aes_encrypt_fail;
+	struct dentry *aes_decrypt_fail;
+	struct dentry *aes_encrypt_packets;
+	struct dentry *aes_decrypt_packets;
+	struct dentry *aes_encrypt_interrupt;
+	struct dentry *aes_decrypt_interrupt;
+
+	struct dentry *event_heart_beat;
+	struct dentry *event_calibration;
+	struct dentry *event_rx_mismatch;
+	struct dentry *event_rx_mem_empty;
+	struct dentry *event_rx_pool;
+	struct dentry *event_oom_late;
+	struct dentry *event_phy_transmit_error;
+	struct dentry *event_tx_stuck;
+
+	struct dentry *ps_pspoll_timeouts;
+	struct dentry *ps_upsd_timeouts;
+	struct dentry *ps_upsd_max_sptime;
+	struct dentry *ps_upsd_max_apturn;
+	struct dentry *ps_pspoll_max_apturn;
+	struct dentry *ps_pspoll_utilization;
+	struct dentry *ps_upsd_utilization;
+
+	struct dentry *rxpipe_rx_prep_beacon_drop;
+	struct dentry *rxpipe_descr_host_int_trig_rx_data;
+	struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+	struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+	struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+	struct dentry *tx_queue_len;
+
+	struct dentry *retry_count;
+	struct dentry *excessive_retries;
+};
+
+struct wl12xx {
+	struct ieee80211_hw *hw;
+	bool mac80211_registered;
+
+	struct spi_device *spi;
+
+	void (*set_power)(bool enable);
+	int irq;
+
+	enum wl12xx_state state;
+	struct mutex mutex;
+
+	int physical_mem_addr;
+	int physical_reg_addr;
+	int virtual_mem_addr;
+	int virtual_reg_addr;
+
+	struct wl12xx_chip chip;
+
+	int cmd_box_addr;
+	int event_box_addr;
+	struct boot_attr boot_attr;
+
+	u8 *fw;
+	size_t fw_len;
+	u8 *nvs;
+	size_t nvs_len;
+
+	u8 bssid[ETH_ALEN];
+	u8 mac_addr[ETH_ALEN];
+	u8 bss_type;
+	u8 listen_int;
+	int channel;
+
+	void *target_mem_map;
+	struct acx_data_path_params_resp *data_path;
+
+	/* Number of TX packets transferred to the FW, modulo 16 */
+	u32 data_in_count;
+
+	/* Frames scheduled for transmission, not handled yet */
+	struct sk_buff_head tx_queue;
+	bool tx_queue_stopped;
+
+	struct work_struct tx_work;
+	struct work_struct filter_work;
+
+	/* Pending TX frames */
+	struct sk_buff *tx_frames[16];
+
+	/*
+	 * Index pointing to the next TX complete entry
+	 * in the cyclic XT complete array we get from
+	 * the FW.
+	 */
+	u32 next_tx_complete;
+
+	/* FW Rx counter */
+	u32 rx_counter;
+
+	/* Rx frames handled */
+	u32 rx_handled;
+
+	/* Current double buffer */
+	u32 rx_current_buffer;
+	u32 rx_last_id;
+
+	/* The target interrupt mask */
+	u32 intr_mask;
+	struct work_struct irq_work;
+
+	/* The mbox event mask */
+	u32 event_mask;
+
+	/* Mailbox pointers */
+	u32 mbox_ptr[2];
+
+	/* Are we currently scanning */
+	bool scanning;
+
+	/* Our association ID */
+	u16 aid;
+
+	/* Default key (for WEP) */
+	u32 default_key;
+
+	unsigned int tx_mgmt_frm_rate;
+	unsigned int tx_mgmt_frm_mod;
+
+	unsigned int rx_config;
+	unsigned int rx_filter;
+
+	/* is firmware in elp mode */
+	bool elp;
+
+	/* we can be in psm, but not in elp, we have to differentiate */
+	bool psm;
+
+	/* PSM mode requested */
+	bool psm_requested;
+
+	/* in dBm */
+	int power_level;
+
+	struct wl12xx_stats stats;
+	struct wl12xx_debugfs debugfs;
+};
+
+int wl12xx_plt_start(struct wl12xx *wl);
+int wl12xx_plt_stop(struct wl12xx *wl);
+
+#define DEFAULT_HW_GEN_MODULATION_TYPE    CCK_LONG /* Long Preamble */
+#define DEFAULT_HW_GEN_TX_RATE          RATE_2MBPS
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define WL12XX_DEFAULT_POWER_LEVEL 20
+
+#define WL12XX_TX_QUEUE_MAX_LENGTH 20
+
+/* Different chips need different sleep times after power on.  WL1271 needs
+ * 200ms, WL1251 needs only 10ms.  By default we use 200ms, but as soon as we
+ * know the chip ID, we change the sleep value in the wl12xx chip structure,
+ * so in subsequent power ons, we don't waste more time then needed.  */
+#define WL12XX_DEFAULT_POWER_ON_SLEEP 200
+
+#define CHIP_ID_1251_PG10	           (0x7010101)
+#define CHIP_ID_1251_PG11	           (0x7020101)
+#define CHIP_ID_1251_PG12	           (0x7030101)
+#define CHIP_ID_1271_PG10	           (0x4030101)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
new file mode 100644
index 00000000000..657c2dbcb7d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -0,0 +1,156 @@
+#ifndef __WL12XX_80211_H__
+#define __WL12XX_80211_H__
+
+#include <linux/if_ether.h>	/* ETH_ALEN */
+
+/* RATES */
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	  0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	 (IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+	IEEE80211_CCK_RATE_5MB_MASK | \
+	IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK	  0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	  (IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+				      IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+
+/* This really should be 8, but not for our firmware */
+#define MAX_SUPPORTED_RATES 32
+#define COUNTRY_STRING_LEN 3
+#define MAX_COUNTRY_TRIPLETS 32
+
+/* Headers */
+struct ieee80211_header {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 da[ETH_ALEN];
+	u8 sa[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 payload[0];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_header {
+	u8 id;
+	u8 len;
+} __attribute__ ((packed));
+
+/* IEs */
+
+struct wl12xx_ie_ssid {
+	struct wl12xx_ie_header header;
+	char ssid[IW_ESSID_MAX_SIZE];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_rates {
+	struct wl12xx_ie_header header;
+	u8 rates[MAX_SUPPORTED_RATES];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_ds_params {
+	struct wl12xx_ie_header header;
+	u8 channel;
+} __attribute__ ((packed));
+
+struct country_triplet {
+	u8 channel;
+	u8 num_channels;
+	u8 max_tx_power;
+} __attribute__ ((packed));
+
+struct wl12xx_ie_country {
+	struct wl12xx_ie_header header;
+	u8 country_string[COUNTRY_STRING_LEN];
+	struct country_triplet triplets[MAX_COUNTRY_TRIPLETS];
+} __attribute__ ((packed));
+
+
+/* Templates */
+
+struct wl12xx_beacon_template {
+	struct ieee80211_header header;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+	struct wl12xx_ie_ds_params ds_params;
+	struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+struct wl12xx_null_data_template {
+	struct ieee80211_header header;
+} __attribute__ ((packed));
+
+struct wl12xx_ps_poll_template {
+	u16 fc;
+	u16 aid;
+	u8 bssid[ETH_ALEN];
+	u8 ta[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct wl12xx_qos_null_data_template {
+	struct ieee80211_header header;
+	__le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct wl12xx_probe_req_template {
+	struct ieee80211_header header;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+} __attribute__ ((packed));
+
+
+struct wl12xx_probe_resp_template {
+	struct ieee80211_header header;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+	struct wl12xx_ie_ds_params ds_params;
+	struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 1f64d6033ab..e3e96bb2c24 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1348,6 +1348,7 @@ static int wl3501_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (rc) {
 		++dev->stats.tx_dropped;
 		netif_stop_queue(dev);
+		rc = NETDEV_TX_OK;
 	} else {
 		++dev->stats.tx_packets;
 		dev->stats.tx_bytes += skb->len;
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 5fabd9c0f07..4430b8d92e2 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -819,11 +819,11 @@ static int zd1201_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (err) {
 		dev->stats.tx_errors++;
 		netif_start_queue(dev);
-		return err;
+	} else {
+		dev->stats.tx_packets++;
+		dev->stats.tx_bytes += skb->len;
+		dev->trans_start = jiffies;
 	}
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
-	dev->trans_start = jiffies;
 	kfree_skb(skb);
 
 	return 0;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index c3a51266de2..40b07b98822 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -420,9 +420,9 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
 	if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
 		cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
 
-	/* Multicast */
-	if (is_multicast_ether_addr(header->addr1))
-		cs->control |= ZD_CS_MULTICAST;
+	/* No ACK expected (multicast, etc.) */
+	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+		cs->control |= ZD_CS_NO_ACK;
 
 	/* PS-POLL */
 	if (ieee80211_is_pspoll(header->frame_control))
@@ -755,52 +755,6 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
 	return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
 }
 
-static int zd_op_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				   struct ieee80211_if_conf *conf)
-{
-	struct zd_mac *mac = zd_hw_mac(hw);
-	int associated;
-	int r;
-
-	if (mac->type == NL80211_IFTYPE_MESH_POINT ||
-	    mac->type == NL80211_IFTYPE_ADHOC) {
-		associated = true;
-		if (conf->changed & IEEE80211_IFCC_BEACON) {
-			struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-
-			if (!beacon)
-				return -ENOMEM;
-			r = zd_mac_config_beacon(hw, beacon);
-			kfree_skb(beacon);
-
-			if (r < 0)
-				return r;
-		}
-
-		if (conf->changed & IEEE80211_IFCC_BEACON_ENABLED) {
-			u32 interval;
-
-			if (conf->enable_beacon)
-				interval = BCN_MODE_IBSS | hw->conf.beacon_int;
-			else
-				interval = 0;
-
-			r = zd_set_beacon_interval(&mac->chip, interval);
-			if (r < 0)
-				return r;
-		}
-	} else
-		associated = is_valid_ether_addr(conf->bssid);
-
-	spin_lock_irq(&mac->lock);
-	mac->associated = associated;
-	spin_unlock_irq(&mac->lock);
-
-	/* TODO: do hardware bssid filtering */
-	return 0;
-}
-
 static void zd_process_intr(struct work_struct *work)
 {
 	u16 int_status;
@@ -923,9 +877,42 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct zd_mac *mac = zd_hw_mac(hw);
 	unsigned long flags;
+	int associated;
 
 	dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
 
+	if (mac->type == NL80211_IFTYPE_MESH_POINT ||
+	    mac->type == NL80211_IFTYPE_ADHOC) {
+		associated = true;
+		if (changes & BSS_CHANGED_BEACON) {
+			struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+			if (beacon) {
+				zd_mac_config_beacon(hw, beacon);
+				kfree_skb(beacon);
+			}
+		}
+
+		if (changes & BSS_CHANGED_BEACON_ENABLED) {
+			u32 interval;
+
+			if (bss_conf->enable_beacon)
+				interval = BCN_MODE_IBSS |
+						bss_conf->beacon_int;
+			else
+				interval = 0;
+
+			zd_set_beacon_interval(&mac->chip, interval);
+		}
+	} else
+		associated = is_valid_ether_addr(bss_conf->bssid);
+
+	spin_lock_irq(&mac->lock);
+	mac->associated = associated;
+	spin_unlock_irq(&mac->lock);
+
+	/* TODO: do hardware bssid filtering */
+
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
 		spin_lock_irqsave(&mac->lock, flags);
 		mac->short_preamble = bss_conf->use_short_preamble;
@@ -952,7 +939,6 @@ static const struct ieee80211_ops zd_ops = {
 	.add_interface		= zd_op_add_interface,
 	.remove_interface	= zd_op_remove_interface,
 	.config			= zd_op_config,
-	.config_interface	= zd_op_config_interface,
 	.configure_filter	= zd_op_configure_filter,
 	.bss_info_changed	= zd_op_bss_info_changed,
 	.get_tsf		= zd_op_get_tsf,
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 4c05d3ee4c3..7c2759118d1 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -87,7 +87,7 @@ struct zd_ctrlset {
 
 /* zd_ctrlset control field */
 #define ZD_CS_NEED_RANDOM_BACKOFF	0x01
-#define ZD_CS_MULTICAST			0x02
+#define ZD_CS_NO_ACK			0x02
 
 #define ZD_CS_FRAME_TYPE_MASK		0x0c
 #define ZD_CS_DATA_FRAME		0x00
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 7477ffdcddb..3c7a5053f1d 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -717,7 +717,7 @@ static void yellowfin_tx_timeout(struct net_device *dev)
 	if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
 		netif_wake_queue (dev);		/* Typical path */
 
-	dev->trans_start = jiffies;
+	dev->trans_start = jiffies; /* prevent tx timeout */
 	dev->stats.tx_errors++;
 }
 
@@ -876,7 +876,6 @@ static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		netif_start_queue (dev);		/* Typical path */
 	else
 		yp->tx_full = 1;
-	dev->trans_start = jiffies;
 
 	if (yellowfin_debug > 4) {
 		printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index f821dbc952a..d2fa27c5c1b 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,21 +1,27 @@
 config OF_DEVICE
 	def_bool y
-	depends on OF && (SPARC || PPC_OF)
+	depends on OF && (SPARC || PPC_OF || MICROBLAZE)
 
 config OF_GPIO
 	def_bool y
-	depends on OF && PPC_OF && GPIOLIB
+	depends on OF && (PPC_OF || MICROBLAZE) && GPIOLIB
 	help
 	  OpenFirmware GPIO accessors
 
 config OF_I2C
 	def_tristate I2C
-	depends on PPC_OF && I2C
+	depends on (PPC_OF || MICROBLAZE) && I2C
 	help
 	  OpenFirmware I2C accessors
 
 config OF_SPI
 	def_tristate SPI
-	depends on OF && PPC_OF && SPI
+	depends on OF && (PPC_OF || MICROBLAZE) && SPI
 	help
 	  OpenFirmware SPI accessors
+
+config OF_MDIO
+	def_tristate PHYLIB
+	depends on OF && PHYLIB
+	help
+	  OpenFirmware MDIO bus (Ethernet PHY) accessors
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 4c3c6f8e36f..bdfb5f5d4b0 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_OF_DEVICE) += device.o platform.o
 obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)	+= of_i2c.o
 obj-$(CONFIG_OF_SPI)	+= of_spi.o
+obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 41c5dfd8535..69f85c07d17 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -447,6 +447,7 @@ struct of_modalias_table {
 static struct of_modalias_table of_modalias_table[] = {
 	{ "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
 	{ "mmc-spi-slot", "mmc_spi" },
+	{ "stm,m25p40", "m25p80" },
 };
 
 /**
@@ -495,6 +496,30 @@ int of_modalias_node(struct device_node *node, char *modalias, int len)
 EXPORT_SYMBOL_GPL(of_modalias_node);
 
 /**
+ * of_parse_phandle - Resolve a phandle property to a device_node pointer
+ * @np: Pointer to device node holding phandle property
+ * @phandle_name: Name of property holding a phandle value
+ * @index: For properties holding a table of phandles, this is the index into
+ *         the table
+ *
+ * Returns the device_node pointer with refcount incremented.  Use
+ * of_node_put() on it when done.
+ */
+struct device_node *
+of_parse_phandle(struct device_node *np, const char *phandle_name, int index)
+{
+	const phandle *phandle;
+	int size;
+
+	phandle = of_get_property(np, phandle_name, &size);
+	if ((!phandle) || (size < sizeof(*phandle) * (index + 1)))
+		return NULL;
+
+	return of_find_node_by_phandle(phandle[index]);
+}
+EXPORT_SYMBOL(of_parse_phandle);
+
+/**
  * of_parse_phandles_with_args - Find a node pointed by phandle in a list
  * @np:		pointer to a device tree node containing a list
  * @list_name:	property name that contains a list
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
new file mode 100644
index 00000000000..aee967d7f76
--- /dev/null
+++ b/drivers/of/of_mdio.c
@@ -0,0 +1,139 @@
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the OpenFirmware device tree and using it to populate an mii_bus.
+ */
+
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_LICENSE("GPL");
+
+/**
+ * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
+ * @mdio: pointer to mii_bus structure
+ * @np: pointer to device_node of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @np.
+ */
+int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+{
+	struct phy_device *phy;
+	struct device_node *child;
+	int rc, i;
+
+	/* Mask out all PHYs from auto probing.  Instead the PHYs listed in
+	 * the device tree are populated after the bus has been registered */
+	mdio->phy_mask = ~0;
+
+	/* Clear all the IRQ properties */
+	if (mdio->irq)
+		for (i=0; i<PHY_MAX_ADDR; i++)
+			mdio->irq[i] = PHY_POLL;
+
+	/* Register the MDIO bus */
+	rc = mdiobus_register(mdio);
+	if (rc)
+		return rc;
+
+	/* Loop over the child nodes and register a phy_device for each one */
+	for_each_child_of_node(np, child) {
+		const u32 *addr;
+		int len;
+
+		/* A PHY must have a reg property in the range [0-31] */
+		addr = of_get_property(child, "reg", &len);
+		if (!addr || len < sizeof(*addr) || *addr >= 32 || *addr < 0) {
+			dev_err(&mdio->dev, "%s has invalid PHY address\n",
+				child->full_name);
+			continue;
+		}
+
+		if (mdio->irq) {
+			mdio->irq[*addr] = irq_of_parse_and_map(child, 0);
+			if (!mdio->irq[*addr])
+				mdio->irq[*addr] = PHY_POLL;
+		}
+
+		phy = get_phy_device(mdio, *addr);
+		if (!phy) {
+			dev_err(&mdio->dev, "error probing PHY at address %i\n",
+				*addr);
+			continue;
+		}
+		phy_scan_fixups(phy);
+
+		/* Associate the OF node with the device structure so it
+		 * can be looked up later */
+		of_node_get(child);
+		dev_archdata_set_node(&phy->dev.archdata, child);
+
+		/* All data is now stored in the phy struct; register it */
+		rc = phy_device_register(phy);
+		if (rc) {
+			phy_device_free(phy);
+			of_node_put(child);
+			continue;
+		}
+
+		dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
+			child->name, *addr);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(of_mdiobus_register);
+
+/**
+ * of_phy_find_device - Give a PHY node, find the phy_device
+ * @phy_np: Pointer to the phy's device tree node
+ *
+ * Returns a pointer to the phy_device.
+ */
+struct phy_device *of_phy_find_device(struct device_node *phy_np)
+{
+	struct device *d;
+	int match(struct device *dev, void *phy_np)
+	{
+		return dev_archdata_get_node(&dev->archdata) == phy_np;
+	}
+
+	if (!phy_np)
+		return NULL;
+
+	d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
+	return d ? to_phy_device(d) : NULL;
+}
+EXPORT_SYMBOL(of_phy_find_device);
+
+/**
+ * of_phy_connect - Connect to the phy described in the device tree
+ * @dev: pointer to net_device claiming the phy
+ * @phy_np: Pointer to device tree node for the PHY
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * Returns a pointer to the phy_device if successfull.  NULL otherwise
+ */
+struct phy_device *of_phy_connect(struct net_device *dev,
+				  struct device_node *phy_np,
+				  void (*hndlr)(struct net_device *), u32 flags,
+				  phy_interface_t iface)
+{
+	struct phy_device *phy = of_phy_find_device(phy_np);
+
+	if (!phy)
+		return NULL;
+
+	return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ba6af162fd3..b77ae679427 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -39,7 +39,6 @@ obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
 obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PPC32) += setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 3eee70928d4..2d6da78fddb 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -679,7 +679,7 @@ alloc_err:
 	return rc;
 }
 
-static int sn_pci_hotplug_init(void)
+static int __init sn_pci_hotplug_init(void)
 {
 	struct pci_bus *pci_bus = NULL;
 	int rc;
@@ -716,7 +716,7 @@ static int sn_pci_hotplug_init(void)
 	return registered == 1 ? 0 : -ENODEV;
 }
 
-static void sn_pci_hotplug_exit(void)
+static void __exit sn_pci_hotplug_exit(void)
 {
 	struct hotplug_slot *bss_hotplug_slot;
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 3067673d54f..bd4253f93d5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2461,6 +2461,8 @@ static void __devinit quirk_i82576_sriov(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10c9, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov);
 
 #endif	/* CONFIG_PCI_IOV */
 
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 27647354398..fbf965b31c1 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER || ARCH_PXA_ESERIES)
+		    || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac4632722..047394d98ac 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
+pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
new file mode 100644
index 00000000000..490749ea677
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -0,0 +1,174 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_stargate2.c
+ *
+ * Stargate 2 PCMCIA specific routines.
+ *
+ * Created:	December 6, 2005
+ * Author:	Ed C. Epp
+ * Copyright:	Intel Corp 2005
+ *              Jonathan Cameron <jic23@cam.ac.uk> 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define SG2_S0_BUFF_CTL		120
+#define SG2_S0_POWER_CTL	108
+#define SG2_S0_GPIO_RESET	82
+#define SG2_S0_GPIO_DETECT	53
+#define SG2_S0_GPIO_READY	81
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+};
+
+static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
+	state->ready  = !!gpio_get_value(SG2_S0_GPIO_READY);
+	state->bvd1   = 0; /* not available - battery detect on card */
+	state->bvd2   = 0; /* not available */
+	state->vs_3v  = 1; /* not available - voltage detect for card */
+	state->vs_Xv  = 0; /* not available */
+	state->wrprot = 0; /* not available - write protect */
+}
+
+static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+	/* Enable card power */
+	switch (state->Vcc) {
+	case 0:
+		/* sets power ctl register high */
+		gpio_set_value(SG2_S0_POWER_CTL, 1);
+		break;
+	case 33:
+	case 50:
+		/* sets power control register low (clear) */
+		gpio_set_value(SG2_S0_POWER_CTL, 0);
+		msleep(100);
+		break;
+	default:
+		pr_err("%s(): bad Vcc %u\n",
+		       __func__, state->Vcc);
+		return -1;
+	}
+
+	/* reset */
+	gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
+	.owner			= THIS_MODULE,
+	.hw_init		= sg2_pcmcia_hw_init,
+	.hw_shutdown		= sg2_pcmcia_hw_shutdown,
+	.socket_state		= sg2_pcmcia_socket_state,
+	.configure_socket	= sg2_pcmcia_configure_socket,
+	.socket_init		= sg2_pcmcia_socket_init,
+	.socket_suspend		= sg2_pcmcia_socket_suspend,
+	.nr			= 1,
+};
+
+static struct platform_device *sg2_pcmcia_device;
+
+static int __init sg2_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_stargate2())
+		return -ENODEV;
+
+	sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!sg2_pcmcia_device)
+		return -ENOMEM;
+
+	ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl");
+	if (ret)
+		goto error_put_platform_device;
+	ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl");
+	if (ret)
+		goto error_free_gpio_buff_ctl;
+	ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset");
+	if (ret)
+		goto error_free_gpio_power_ctl;
+	/* Set gpio directions */
+	gpio_direction_output(SG2_S0_BUFF_CTL, 0);
+	gpio_direction_output(SG2_S0_POWER_CTL, 1);
+	gpio_direction_output(SG2_S0_GPIO_RESET, 1);
+
+	ret = platform_device_add_data(sg2_pcmcia_device,
+				       &sg2_pcmcia_ops,
+				       sizeof(sg2_pcmcia_ops));
+	if (ret)
+		goto error_free_gpio_reset;
+
+	ret = platform_device_add(sg2_pcmcia_device);
+	if (ret)
+		goto error_free_gpio_reset;
+
+	return 0;
+error_free_gpio_reset:
+	gpio_free(SG2_S0_GPIO_RESET);
+error_free_gpio_power_ctl:
+	gpio_free(SG2_S0_POWER_CTL);
+error_free_gpio_buff_ctl:
+	gpio_free(SG2_S0_BUFF_CTL);
+error_put_platform_device:
+	platform_device_put(sg2_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit sg2_pcmcia_exit(void)
+{
+	platform_device_unregister(sg2_pcmcia_device);
+	gpio_free(SG2_S0_BUFF_CTL);
+	gpio_free(SG2_S0_POWER_CTL);
+	gpio_free(SG2_S0_GPIO_RESET);
+}
+
+fs_initcall(sg2_pcmcia_init);
+module_exit(sg2_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 284ebaca6e4..c682ac53641 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -21,7 +21,7 @@ config ACER_WMI
 	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIO_I8042
-	depends on RFKILL
+	depends on RFKILL || RFKILL = n
 	select ACPI_WMI
 	---help---
 	  This is a driver for newer Acer (and Wistron) laptops. It adds
@@ -60,7 +60,7 @@ config DELL_LAPTOP
 	depends on DCDBAS
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
-	depends on RFKILL
+	depends on RFKILL || RFKILL = n
 	depends on POWER_SUPPLY
 	default n
 	---help---
@@ -117,7 +117,7 @@ config HP_WMI
 	tristate "HP WMI extras"
 	depends on ACPI_WMI
 	depends on INPUT
-	depends on RFKILL
+	depends on RFKILL || RFKILL = n
 	help
 	 Say Y here if you want to support WMI-based hotkeys on HP laptops and
 	 to read data from WMI such as docking or ambient light sensor state.
@@ -196,14 +196,13 @@ config THINKPAD_ACPI
 	tristate "ThinkPad ACPI Laptop Extras"
 	depends on ACPI
 	depends on INPUT
+	depends on RFKILL || RFKILL = n
 	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	select NVRAM
 	select NEW_LEDS
 	select LEDS_CLASS
-	select NET
-	select RFKILL
 	---help---
 	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
 	  support for Fn-Fx key combinations, Bluetooth control, video
@@ -338,9 +337,9 @@ config EEEPC_LAPTOP
 	depends on ACPI
 	depends on INPUT
 	depends on EXPERIMENTAL
+	depends on RFKILL || RFKILL = n
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
-	select RFKILL
 	---help---
 	  This driver supports the Fn-Fx keys on Eee PC laptops.
 	  It also adds the ability to switch camera/wlan on/off.
@@ -405,9 +404,8 @@ config ACPI_TOSHIBA
 	tristate "Toshiba Laptop Extras"
 	depends on ACPI
 	depends on INPUT
+	depends on RFKILL || RFKILL = n
 	select INPUT_POLLDEV
-	select NET
-	select RFKILL
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  This driver adds support for access to certain system settings
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 0f6e43bf4fc..09a503e5da6 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -958,59 +958,47 @@ static void acer_rfkill_update(struct work_struct *ignored)
 
 	status = get_u32(&state, ACER_CAP_WIRELESS);
 	if (ACPI_SUCCESS(status))
-		rfkill_force_state(wireless_rfkill, state ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED);
+		rfkill_set_sw_state(wireless_rfkill, !!state);
 
 	if (has_cap(ACER_CAP_BLUETOOTH)) {
 		status = get_u32(&state, ACER_CAP_BLUETOOTH);
 		if (ACPI_SUCCESS(status))
-			rfkill_force_state(bluetooth_rfkill, state ?
-				RFKILL_STATE_UNBLOCKED :
-				RFKILL_STATE_SOFT_BLOCKED);
+			rfkill_set_sw_state(bluetooth_rfkill, !!state);
 	}
 
 	schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
 }
 
-static int acer_rfkill_set(void *data, enum rfkill_state state)
+static int acer_rfkill_set(void *data, bool blocked)
 {
 	acpi_status status;
-	u32 *cap = data;
-	status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap);
+	u32 cap = (unsigned long)data;
+	status = set_u32(!!blocked, cap);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 	return 0;
 }
 
-static struct rfkill * acer_rfkill_register(struct device *dev,
-enum rfkill_type type, char *name, u32 cap)
+static const struct rfkill_ops acer_rfkill_ops = {
+	.set_block = acer_rfkill_set,
+};
+
+static struct rfkill *acer_rfkill_register(struct device *dev,
+					   enum rfkill_type type,
+					   char *name, u32 cap)
 {
 	int err;
-	u32 state;
-	u32 *data;
 	struct rfkill *rfkill_dev;
 
-	rfkill_dev = rfkill_allocate(dev, type);
+	rfkill_dev = rfkill_alloc(name, dev, type,
+				  &acer_rfkill_ops,
+				  (void *)(unsigned long)cap);
 	if (!rfkill_dev)
 		return ERR_PTR(-ENOMEM);
-	rfkill_dev->name = name;
-	get_u32(&state, cap);
-	rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED :
-		RFKILL_STATE_SOFT_BLOCKED;
-	data = kzalloc(sizeof(u32), GFP_KERNEL);
-	if (!data) {
-		rfkill_free(rfkill_dev);
-		return ERR_PTR(-ENOMEM);
-	}
-	*data = cap;
-	rfkill_dev->data = data;
-	rfkill_dev->toggle_radio = acer_rfkill_set;
-	rfkill_dev->user_claim_unsupported = 1;
 
 	err = rfkill_register(rfkill_dev);
 	if (err) {
-		kfree(rfkill_dev->data);
-		rfkill_free(rfkill_dev);
+		rfkill_destroy(rfkill_dev);
 		return ERR_PTR(err);
 	}
 	return rfkill_dev;
@@ -1028,8 +1016,8 @@ static int acer_rfkill_init(struct device *dev)
 			RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
 			ACER_CAP_BLUETOOTH);
 		if (IS_ERR(bluetooth_rfkill)) {
-			kfree(wireless_rfkill->data);
 			rfkill_unregister(wireless_rfkill);
+			rfkill_destroy(wireless_rfkill);
 			return PTR_ERR(bluetooth_rfkill);
 		}
 	}
@@ -1042,11 +1030,13 @@ static int acer_rfkill_init(struct device *dev)
 static void acer_rfkill_exit(void)
 {
 	cancel_delayed_work_sync(&acer_rfkill_work);
-	kfree(wireless_rfkill->data);
+
 	rfkill_unregister(wireless_rfkill);
+	rfkill_destroy(wireless_rfkill);
+
 	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		kfree(bluetooth_rfkill->data);
 		rfkill_unregister(bluetooth_rfkill);
+		rfkill_destroy(bluetooth_rfkill);
 	}
 	return;
 }
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index af9f4302117..2faf0e14f05 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -174,10 +174,11 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
    result[3]: NVRAM format version number
 */
 
-static int dell_rfkill_set(int radio, enum rfkill_state state)
+static int dell_rfkill_set(void *data, bool blocked)
 {
 	struct calling_interface_buffer buffer;
-	int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1;
+	int disable = blocked ? 0 : 1;
+	unsigned long radio = (unsigned long)data;
 
 	memset(&buffer, 0, sizeof(struct calling_interface_buffer));
 	buffer.input[0] = (1 | (radio<<8) | (disable << 16));
@@ -186,56 +187,24 @@ static int dell_rfkill_set(int radio, enum rfkill_state state)
 	return 0;
 }
 
-static int dell_wifi_set(void *data, enum rfkill_state state)
-{
-	return dell_rfkill_set(1, state);
-}
-
-static int dell_bluetooth_set(void *data, enum rfkill_state state)
-{
-	return dell_rfkill_set(2, state);
-}
-
-static int dell_wwan_set(void *data, enum rfkill_state state)
-{
-	return dell_rfkill_set(3, state);
-}
-
-static int dell_rfkill_get(int bit, enum rfkill_state *state)
+static void dell_rfkill_query(struct rfkill *rfkill, void *data)
 {
 	struct calling_interface_buffer buffer;
 	int status;
-	int new_state = RFKILL_STATE_HARD_BLOCKED;
+	int bit = (unsigned long)data + 16;
 
 	memset(&buffer, 0, sizeof(struct calling_interface_buffer));
 	dell_send_request(&buffer, 17, 11);
 	status = buffer.output[1];
 
-	if (status & (1<<16))
-		new_state = RFKILL_STATE_SOFT_BLOCKED;
-
-	if (status & (1<<bit))
-		*state = new_state;
-	else
-		*state = RFKILL_STATE_UNBLOCKED;
-
-	return 0;
-}
-
-static int dell_wifi_get(void *data, enum rfkill_state *state)
-{
-	return dell_rfkill_get(17, state);
-}
-
-static int dell_bluetooth_get(void *data, enum rfkill_state *state)
-{
-	return dell_rfkill_get(18, state);
+	if (status & BIT(bit))
+		rfkill_set_hw_state(rfkill, !!(status & BIT(16)));
 }
 
-static int dell_wwan_get(void *data, enum rfkill_state *state)
-{
-	return dell_rfkill_get(19, state);
-}
+static const struct rfkill_ops dell_rfkill_ops = {
+	.set_block = dell_rfkill_set,
+	.query = dell_rfkill_query,
+};
 
 static int dell_setup_rfkill(void)
 {
@@ -248,36 +217,37 @@ static int dell_setup_rfkill(void)
 	status = buffer.output[1];
 
 	if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
-		wifi_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WLAN);
-		if (!wifi_rfkill)
+		wifi_rfkill = rfkill_alloc("dell-wifi", NULL, RFKILL_TYPE_WLAN,
+					   &dell_rfkill_ops, (void *) 1);
+		if (!wifi_rfkill) {
+			ret = -ENOMEM;
 			goto err_wifi;
-		wifi_rfkill->name = "dell-wifi";
-		wifi_rfkill->toggle_radio = dell_wifi_set;
-		wifi_rfkill->get_state = dell_wifi_get;
+		}
 		ret = rfkill_register(wifi_rfkill);
 		if (ret)
 			goto err_wifi;
 	}
 
 	if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
-		bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH);
-		if (!bluetooth_rfkill)
+		bluetooth_rfkill = rfkill_alloc("dell-bluetooth", NULL,
+						RFKILL_TYPE_BLUETOOTH,
+						&dell_rfkill_ops, (void *) 2);
+		if (!bluetooth_rfkill) {
+			ret = -ENOMEM;
 			goto err_bluetooth;
-		bluetooth_rfkill->name = "dell-bluetooth";
-		bluetooth_rfkill->toggle_radio = dell_bluetooth_set;
-		bluetooth_rfkill->get_state = dell_bluetooth_get;
+		}
 		ret = rfkill_register(bluetooth_rfkill);
 		if (ret)
 			goto err_bluetooth;
 	}
 
 	if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
-		wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN);
-		if (!wwan_rfkill)
+		wwan_rfkill = rfkill_alloc("dell-wwan", NULL, RFKILL_TYPE_WWAN,
+					   &dell_rfkill_ops, (void *) 3);
+		if (!wwan_rfkill) {
+			ret = -ENOMEM;
 			goto err_wwan;
-		wwan_rfkill->name = "dell-wwan";
-		wwan_rfkill->toggle_radio = dell_wwan_set;
-		wwan_rfkill->get_state = dell_wwan_get;
+		}
 		ret = rfkill_register(wwan_rfkill);
 		if (ret)
 			goto err_wwan;
@@ -285,22 +255,15 @@ static int dell_setup_rfkill(void)
 
 	return 0;
 err_wwan:
-	if (wwan_rfkill)
-		rfkill_free(wwan_rfkill);
-	if (bluetooth_rfkill) {
+	rfkill_destroy(wwan_rfkill);
+	if (bluetooth_rfkill)
 		rfkill_unregister(bluetooth_rfkill);
-		bluetooth_rfkill = NULL;
-	}
 err_bluetooth:
-	if (bluetooth_rfkill)
-		rfkill_free(bluetooth_rfkill);
-	if (wifi_rfkill) {
+	rfkill_destroy(bluetooth_rfkill);
+	if (wifi_rfkill)
 		rfkill_unregister(wifi_rfkill);
-		wifi_rfkill = NULL;
-	}
 err_wifi:
-	if (wifi_rfkill)
-		rfkill_free(wifi_rfkill);
+	rfkill_destroy(wifi_rfkill);
 
 	return ret;
 }
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 353a898c369..03bf522bd7a 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -299,39 +299,22 @@ static int update_bl_status(struct backlight_device *bd)
  * Rfkill helpers
  */
 
-static int eeepc_wlan_rfkill_set(void *data, enum rfkill_state state)
-{
-	if (state == RFKILL_STATE_SOFT_BLOCKED)
-		return set_acpi(CM_ASL_WLAN, 0);
-	else
-		return set_acpi(CM_ASL_WLAN, 1);
-}
-
-static int eeepc_wlan_rfkill_state(void *data, enum rfkill_state *state)
+static bool eeepc_wlan_rfkill_blocked(void)
 {
 	if (get_acpi(CM_ASL_WLAN) == 1)
-		*state = RFKILL_STATE_UNBLOCKED;
-	else
-		*state = RFKILL_STATE_SOFT_BLOCKED;
-	return 0;
+		return false;
+	return true;
 }
 
-static int eeepc_bluetooth_rfkill_set(void *data, enum rfkill_state state)
+static int eeepc_rfkill_set(void *data, bool blocked)
 {
-	if (state == RFKILL_STATE_SOFT_BLOCKED)
-		return set_acpi(CM_ASL_BLUETOOTH, 0);
-	else
-		return set_acpi(CM_ASL_BLUETOOTH, 1);
+	unsigned long asl = (unsigned long)data;
+	return set_acpi(asl, !blocked);
 }
 
-static int eeepc_bluetooth_rfkill_state(void *data, enum rfkill_state *state)
-{
-	if (get_acpi(CM_ASL_BLUETOOTH) == 1)
-		*state = RFKILL_STATE_UNBLOCKED;
-	else
-		*state = RFKILL_STATE_SOFT_BLOCKED;
-	return 0;
-}
+static const struct rfkill_ops eeepc_rfkill_ops = {
+	.set_block = eeepc_rfkill_set,
+};
 
 /*
  * Sys helpers
@@ -531,9 +514,9 @@ static int notify_brn(void)
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
-	enum rfkill_state state;
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
+	bool blocked;
 
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
@@ -543,9 +526,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		return;
 	}
 
-	eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
-
-	if (state == RFKILL_STATE_UNBLOCKED) {
+	blocked = eeepc_wlan_rfkill_blocked();
+	if (!blocked) {
 		dev = pci_get_slot(bus, 0);
 		if (dev) {
 			/* Device already present */
@@ -566,7 +548,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		}
 	}
 
-	rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
+	rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
 }
 
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
@@ -684,26 +666,17 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
 
 	if (get_acpi(CM_ASL_WLAN) != -1) {
-		ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
-							   RFKILL_TYPE_WLAN);
+		ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
+							&device->dev,
+							RFKILL_TYPE_WLAN,
+							&eeepc_rfkill_ops,
+							(void *)CM_ASL_WLAN);
 
 		if (!ehotk->eeepc_wlan_rfkill)
 			goto wlan_fail;
 
-		ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan";
-		ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set;
-		ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state;
-		if (get_acpi(CM_ASL_WLAN) == 1) {
-			ehotk->eeepc_wlan_rfkill->state =
-				RFKILL_STATE_UNBLOCKED;
-			rfkill_set_default(RFKILL_TYPE_WLAN,
-					   RFKILL_STATE_UNBLOCKED);
-		} else {
-			ehotk->eeepc_wlan_rfkill->state =
-				RFKILL_STATE_SOFT_BLOCKED;
-			rfkill_set_default(RFKILL_TYPE_WLAN,
-					   RFKILL_STATE_SOFT_BLOCKED);
-		}
+		rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
+				    get_acpi(CM_ASL_WLAN) != 1);
 		result = rfkill_register(ehotk->eeepc_wlan_rfkill);
 		if (result)
 			goto wlan_fail;
@@ -711,28 +684,17 @@ static int eeepc_hotk_add(struct acpi_device *device)
 
 	if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
 		ehotk->eeepc_bluetooth_rfkill =
-			rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH);
+			rfkill_alloc("eeepc-bluetooth",
+				     &device->dev,
+				     RFKILL_TYPE_BLUETOOTH,
+				     &eeepc_rfkill_ops,
+				     (void *)CM_ASL_BLUETOOTH);
 
 		if (!ehotk->eeepc_bluetooth_rfkill)
 			goto bluetooth_fail;
 
-		ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth";
-		ehotk->eeepc_bluetooth_rfkill->toggle_radio =
-			eeepc_bluetooth_rfkill_set;
-		ehotk->eeepc_bluetooth_rfkill->get_state =
-			eeepc_bluetooth_rfkill_state;
-		if (get_acpi(CM_ASL_BLUETOOTH) == 1) {
-			ehotk->eeepc_bluetooth_rfkill->state =
-				RFKILL_STATE_UNBLOCKED;
-			rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
-					   RFKILL_STATE_UNBLOCKED);
-		} else {
-			ehotk->eeepc_bluetooth_rfkill->state =
-				RFKILL_STATE_SOFT_BLOCKED;
-			rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
-					   RFKILL_STATE_SOFT_BLOCKED);
-		}
-
+		rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+				    get_acpi(CM_ASL_BLUETOOTH) != 1);
 		result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
 		if (result)
 			goto bluetooth_fail;
@@ -741,13 +703,10 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	return 0;
 
  bluetooth_fail:
-	if (ehotk->eeepc_bluetooth_rfkill)
-		rfkill_free(ehotk->eeepc_bluetooth_rfkill);
+	rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
 	rfkill_unregister(ehotk->eeepc_wlan_rfkill);
-	ehotk->eeepc_wlan_rfkill = NULL;
  wlan_fail:
-	if (ehotk->eeepc_wlan_rfkill)
-		rfkill_free(ehotk->eeepc_wlan_rfkill);
+	rfkill_destroy(ehotk->eeepc_wlan_rfkill);
 	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
 	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 50d9019de2b..16fffe44e33 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -154,58 +154,46 @@ static int hp_wmi_dock_state(void)
 	return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
 }
 
-static int hp_wmi_wifi_set(void *data, enum rfkill_state state)
+static int hp_wmi_set_block(void *data, bool blocked)
 {
-	if (state)
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x101);
-	else
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x100);
-}
+	unsigned long b = (unsigned long) data;
+	int query = BIT(b + 8) | ((!!blocked) << b);
 
-static int hp_wmi_bluetooth_set(void *data, enum rfkill_state state)
-{
-	if (state)
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x202);
-	else
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x200);
+	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }
 
-static int hp_wmi_wwan_set(void *data, enum rfkill_state state)
-{
-	if (state)
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x404);
-	else
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x400);
-}
+static const struct rfkill_ops hp_wmi_rfkill_ops = {
+	.set_block = hp_wmi_set_block,
+};
 
-static int hp_wmi_wifi_state(void)
+static bool hp_wmi_wifi_state(void)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x100)
-		return RFKILL_STATE_UNBLOCKED;
+		return false;
 	else
-		return RFKILL_STATE_SOFT_BLOCKED;
+		return true;
 }
 
-static int hp_wmi_bluetooth_state(void)
+static bool hp_wmi_bluetooth_state(void)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x10000)
-		return RFKILL_STATE_UNBLOCKED;
+		return false;
 	else
-		return RFKILL_STATE_SOFT_BLOCKED;
+		return true;
 }
 
-static int hp_wmi_wwan_state(void)
+static bool hp_wmi_wwan_state(void)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x1000000)
-		return RFKILL_STATE_UNBLOCKED;
+		return false;
 	else
-		return RFKILL_STATE_SOFT_BLOCKED;
+		return true;
 }
 
 static ssize_t show_display(struct device *dev, struct device_attribute *attr,
@@ -347,14 +335,14 @@ static void hp_wmi_notify(u32 value, void *context)
 			}
 		} else if (eventcode == 0x5) {
 			if (wifi_rfkill)
-				rfkill_force_state(wifi_rfkill,
-						   hp_wmi_wifi_state());
+				rfkill_set_sw_state(wifi_rfkill,
+						    hp_wmi_wifi_state());
 			if (bluetooth_rfkill)
-				rfkill_force_state(bluetooth_rfkill,
-						   hp_wmi_bluetooth_state());
+				rfkill_set_sw_state(bluetooth_rfkill,
+						    hp_wmi_bluetooth_state());
 			if (wwan_rfkill)
-				rfkill_force_state(wwan_rfkill,
-						   hp_wmi_wwan_state());
+				rfkill_set_sw_state(wwan_rfkill,
+						    hp_wmi_wwan_state());
 		} else
 			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
 			       eventcode);
@@ -430,34 +418,30 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 		goto add_sysfs_error;
 
 	if (wireless & 0x1) {
-		wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
-		wifi_rfkill->name = "hp-wifi";
-		wifi_rfkill->state = hp_wmi_wifi_state();
-		wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
-		wifi_rfkill->user_claim_unsupported = 1;
+		wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
+					   RFKILL_TYPE_WLAN,
+					   &hp_wmi_rfkill_ops,
+					   (void *) 0);
 		err = rfkill_register(wifi_rfkill);
 		if (err)
-			goto add_sysfs_error;
+			goto register_wifi_error;
 	}
 
 	if (wireless & 0x2) {
-		bluetooth_rfkill = rfkill_allocate(&device->dev,
-						   RFKILL_TYPE_BLUETOOTH);
-		bluetooth_rfkill->name = "hp-bluetooth";
-		bluetooth_rfkill->state = hp_wmi_bluetooth_state();
-		bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
-		bluetooth_rfkill->user_claim_unsupported = 1;
+		bluetooth_rfkill = rfkill_alloc("hp-bluetooth", &device->dev,
+						RFKILL_TYPE_BLUETOOTH,
+						&hp_wmi_rfkill_ops,
+						(void *) 1);
 		err = rfkill_register(bluetooth_rfkill);
 		if (err)
 			goto register_bluetooth_error;
 	}
 
 	if (wireless & 0x4) {
-		wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
-		wwan_rfkill->name = "hp-wwan";
-		wwan_rfkill->state = hp_wmi_wwan_state();
-		wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
-		wwan_rfkill->user_claim_unsupported = 1;
+		wwan_rfkill = rfkill_alloc("hp-wwan", &device->dev,
+					   RFKILL_TYPE_WWAN,
+					   &hp_wmi_rfkill_ops,
+					   (void *) 2);
 		err = rfkill_register(wwan_rfkill);
 		if (err)
 			goto register_wwan_err;
@@ -465,11 +449,15 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 
 	return 0;
 register_wwan_err:
+	rfkill_destroy(wwan_rfkill);
 	if (bluetooth_rfkill)
 		rfkill_unregister(bluetooth_rfkill);
 register_bluetooth_error:
+	rfkill_destroy(bluetooth_rfkill);
 	if (wifi_rfkill)
 		rfkill_unregister(wifi_rfkill);
+register_wifi_error:
+	rfkill_destroy(wifi_rfkill);
 add_sysfs_error:
 	cleanup_sysfs(device);
 	return err;
@@ -479,12 +467,18 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 {
 	cleanup_sysfs(device);
 
-	if (wifi_rfkill)
+	if (wifi_rfkill) {
 		rfkill_unregister(wifi_rfkill);
-	if (bluetooth_rfkill)
+		rfkill_destroy(wifi_rfkill);
+	}
+	if (bluetooth_rfkill) {
 		rfkill_unregister(bluetooth_rfkill);
-	if (wwan_rfkill)
+		rfkill_destroy(wifi_rfkill);
+	}
+	if (wwan_rfkill) {
 		rfkill_unregister(wwan_rfkill);
+		rfkill_destroy(wwan_rfkill);
+	}
 
 	return 0;
 }
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 552958545f9..e48d9a4506f 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -128,11 +128,11 @@ enum sony_nc_rfkill {
 	SONY_BLUETOOTH,
 	SONY_WWAN,
 	SONY_WIMAX,
-	SONY_RFKILL_MAX,
+	N_SONY_RFKILL,
 };
 
-static struct rfkill *sony_rfkill_devices[SONY_RFKILL_MAX];
-static int sony_rfkill_address[SONY_RFKILL_MAX] = {0x300, 0x500, 0x700, 0x900};
+static struct rfkill *sony_rfkill_devices[N_SONY_RFKILL];
+static int sony_rfkill_address[N_SONY_RFKILL] = {0x300, 0x500, 0x700, 0x900};
 static void sony_nc_rfkill_update(void);
 
 /*********** Input Devices ***********/
@@ -1051,151 +1051,96 @@ static void sony_nc_rfkill_cleanup(void)
 {
 	int i;
 
-	for (i = 0; i < SONY_RFKILL_MAX; i++) {
-		if (sony_rfkill_devices[i])
+	for (i = 0; i < N_SONY_RFKILL; i++) {
+		if (sony_rfkill_devices[i]) {
 			rfkill_unregister(sony_rfkill_devices[i]);
+			rfkill_destroy(sony_rfkill_devices[i]);
+		}
 	}
 }
 
-static int sony_nc_rfkill_get(void *data, enum rfkill_state *state)
-{
-	int result;
-	int argument = sony_rfkill_address[(long) data];
-
-	sony_call_snc_handle(0x124, 0x200, &result);
-	if (result & 0x1) {
-		sony_call_snc_handle(0x124, argument, &result);
-		if (result & 0xf)
-			*state = RFKILL_STATE_UNBLOCKED;
-		else
-			*state = RFKILL_STATE_SOFT_BLOCKED;
-	} else {
-		*state = RFKILL_STATE_HARD_BLOCKED;
-	}
-
-	return 0;
-}
-
-static int sony_nc_rfkill_set(void *data, enum rfkill_state state)
+static int sony_nc_rfkill_set(void *data, bool blocked)
 {
 	int result;
 	int argument = sony_rfkill_address[(long) data] + 0x100;
 
-	if (state == RFKILL_STATE_UNBLOCKED)
+	if (!blocked)
 		argument |= 0xff0000;
 
 	return sony_call_snc_handle(0x124, argument, &result);
 }
 
-static int sony_nc_setup_wifi_rfkill(struct acpi_device *device)
-{
-	int err = 0;
-	struct rfkill *sony_wifi_rfkill;
-
-	sony_wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
-	if (!sony_wifi_rfkill)
-		return -1;
-	sony_wifi_rfkill->name = "sony-wifi";
-	sony_wifi_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_wifi_rfkill->get_state = sony_nc_rfkill_get;
-	sony_wifi_rfkill->user_claim_unsupported = 1;
-	sony_wifi_rfkill->data = (void *)SONY_WIFI;
-	err = rfkill_register(sony_wifi_rfkill);
-	if (err)
-		rfkill_free(sony_wifi_rfkill);
-	else {
-		sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
-		sony_nc_rfkill_set(sony_wifi_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
-	}
-	return err;
-}
+static const struct rfkill_ops sony_rfkill_ops = {
+	.set_block = sony_nc_rfkill_set,
+};
 
-static int sony_nc_setup_bluetooth_rfkill(struct acpi_device *device)
+static int sony_nc_setup_rfkill(struct acpi_device *device,
+				enum sony_nc_rfkill nc_type)
 {
 	int err = 0;
-	struct rfkill *sony_bluetooth_rfkill;
-
-	sony_bluetooth_rfkill = rfkill_allocate(&device->dev,
-						RFKILL_TYPE_BLUETOOTH);
-	if (!sony_bluetooth_rfkill)
-		return -1;
-	sony_bluetooth_rfkill->name = "sony-bluetooth";
-	sony_bluetooth_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_bluetooth_rfkill->get_state = sony_nc_rfkill_get;
-	sony_bluetooth_rfkill->user_claim_unsupported = 1;
-	sony_bluetooth_rfkill->data = (void *)SONY_BLUETOOTH;
-	err = rfkill_register(sony_bluetooth_rfkill);
-	if (err)
-		rfkill_free(sony_bluetooth_rfkill);
-	else {
-		sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
-		sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
+	struct rfkill *rfk;
+	enum rfkill_type type;
+	const char *name;
+
+	switch (nc_type) {
+	case SONY_WIFI:
+		type = RFKILL_TYPE_WLAN;
+		name = "sony-wifi";
+		break;
+	case SONY_BLUETOOTH:
+		type = RFKILL_TYPE_BLUETOOTH;
+		name = "sony-bluetooth";
+		break;
+	case SONY_WWAN:
+		type = RFKILL_TYPE_WWAN;
+		name = "sony-wwan";
+		break;
+	case SONY_WIMAX:
+		type = RFKILL_TYPE_WIMAX;
+		name = "sony-wimax";
+		break;
+	default:
+		return -EINVAL;
 	}
-	return err;
-}
 
-static int sony_nc_setup_wwan_rfkill(struct acpi_device *device)
-{
-	int err = 0;
-	struct rfkill *sony_wwan_rfkill;
+	rfk = rfkill_alloc(name, &device->dev, type,
+			   &sony_rfkill_ops, (void *)nc_type);
+	if (!rfk)
+		return -ENOMEM;
 
-	sony_wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
-	if (!sony_wwan_rfkill)
-		return -1;
-	sony_wwan_rfkill->name = "sony-wwan";
-	sony_wwan_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_wwan_rfkill->get_state = sony_nc_rfkill_get;
-	sony_wwan_rfkill->user_claim_unsupported = 1;
-	sony_wwan_rfkill->data = (void *)SONY_WWAN;
-	err = rfkill_register(sony_wwan_rfkill);
-	if (err)
-		rfkill_free(sony_wwan_rfkill);
-	else {
-		sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
-		sony_nc_rfkill_set(sony_wwan_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
+	err = rfkill_register(rfk);
+	if (err) {
+		rfkill_destroy(rfk);
+		return err;
 	}
+	sony_rfkill_devices[nc_type] = rfk;
 	return err;
 }
 
-static int sony_nc_setup_wimax_rfkill(struct acpi_device *device)
+static void sony_nc_rfkill_update()
 {
-	int err = 0;
-	struct rfkill *sony_wimax_rfkill;
+	enum sony_nc_rfkill i;
+	int result;
+	bool hwblock;
 
-	sony_wimax_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
-	if (!sony_wimax_rfkill)
-		return -1;
-	sony_wimax_rfkill->name = "sony-wimax";
-	sony_wimax_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_wimax_rfkill->get_state = sony_nc_rfkill_get;
-	sony_wimax_rfkill->user_claim_unsupported = 1;
-	sony_wimax_rfkill->data = (void *)SONY_WIMAX;
-	err = rfkill_register(sony_wimax_rfkill);
-	if (err)
-		rfkill_free(sony_wimax_rfkill);
-	else {
-		sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
-		sony_nc_rfkill_set(sony_wimax_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
-	}
-	return err;
-}
+	sony_call_snc_handle(0x124, 0x200, &result);
+	hwblock = !(result & 0x1);
 
-static void sony_nc_rfkill_update()
-{
-	int i;
-	enum rfkill_state state;
+	for (i = 0; i < N_SONY_RFKILL; i++) {
+		int argument = sony_rfkill_address[i];
 
-	for (i = 0; i < SONY_RFKILL_MAX; i++) {
-		if (sony_rfkill_devices[i]) {
-			sony_rfkill_devices[i]->
-				get_state(sony_rfkill_devices[i]->data,
-					  &state);
-			rfkill_force_state(sony_rfkill_devices[i], state);
+		if (!sony_rfkill_devices[i])
+			continue;
+
+		if (hwblock) {
+			if (rfkill_set_hw_state(sony_rfkill_devices[i], true))
+				sony_nc_rfkill_set((void *)i, true);
+			continue;
 		}
+
+		sony_call_snc_handle(0x124, argument, &result);
+		rfkill_set_states(sony_rfkill_devices[i],
+				  !(result & 0xf), false);
 	}
 }
 
@@ -1214,13 +1159,13 @@ static int sony_nc_rfkill_setup(struct acpi_device *device)
 	}
 
 	if (result & 0x1)
-		sony_nc_setup_wifi_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_WIFI);
 	if (result & 0x2)
-		sony_nc_setup_bluetooth_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_BLUETOOTH);
 	if (result & 0x1c)
-		sony_nc_setup_wwan_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_WWAN);
 	if (result & 0x20)
-		sony_nc_setup_wimax_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_WIMAX);
 
 	return 0;
 }
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 912be65b626..86e958539f4 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -166,13 +166,6 @@ enum {
 
 #define TPACPI_MAX_ACPI_ARGS 3
 
-/* rfkill switches */
-enum {
-	TPACPI_RFK_BLUETOOTH_SW_ID = 0,
-	TPACPI_RFK_WWAN_SW_ID,
-	TPACPI_RFK_UWB_SW_ID,
-};
-
 /* printk headers */
 #define TPACPI_LOG TPACPI_FILE ": "
 #define TPACPI_EMERG	KERN_EMERG	TPACPI_LOG
@@ -1005,67 +998,234 @@ static int __init tpacpi_check_std_acpi_brightness_support(void)
 	return 0;
 }
 
-static int __init tpacpi_new_rfkill(const unsigned int id,
-			struct rfkill **rfk,
+static void printk_deprecated_attribute(const char * const what,
+					const char * const details)
+{
+	tpacpi_log_usertask("deprecated sysfs attribute");
+	printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and "
+		"will be removed. %s\n",
+		what, details);
+}
+
+/*************************************************************************
+ * rfkill and radio control support helpers
+ */
+
+/*
+ * ThinkPad-ACPI firmware handling model:
+ *
+ * WLSW (master wireless switch) is event-driven, and is common to all
+ * firmware-controlled radios.  It cannot be controlled, just monitored,
+ * as expected.  It overrides all radio state in firmware
+ *
+ * The kernel, a masked-off hotkey, and WLSW can change the radio state
+ * (TODO: verify how WLSW interacts with the returned radio state).
+ *
+ * The only time there are shadow radio state changes, is when
+ * masked-off hotkeys are used.
+ */
+
+/*
+ * Internal driver API for radio state:
+ *
+ * int: < 0 = error, otherwise enum tpacpi_rfkill_state
+ * bool: true means radio blocked (off)
+ */
+enum tpacpi_rfkill_state {
+	TPACPI_RFK_RADIO_OFF = 0,
+	TPACPI_RFK_RADIO_ON
+};
+
+/* rfkill switches */
+enum tpacpi_rfk_id {
+	TPACPI_RFK_BLUETOOTH_SW_ID = 0,
+	TPACPI_RFK_WWAN_SW_ID,
+	TPACPI_RFK_UWB_SW_ID,
+	TPACPI_RFK_SW_MAX
+};
+
+static const char *tpacpi_rfkill_names[] = {
+	[TPACPI_RFK_BLUETOOTH_SW_ID] = "bluetooth",
+	[TPACPI_RFK_WWAN_SW_ID] = "wwan",
+	[TPACPI_RFK_UWB_SW_ID] = "uwb",
+	[TPACPI_RFK_SW_MAX] = NULL
+};
+
+/* ThinkPad-ACPI rfkill subdriver */
+struct tpacpi_rfk {
+	struct rfkill *rfkill;
+	enum tpacpi_rfk_id id;
+	const struct tpacpi_rfk_ops *ops;
+};
+
+struct tpacpi_rfk_ops {
+	/* firmware interface */
+	int (*get_status)(void);
+	int (*set_status)(const enum tpacpi_rfkill_state);
+};
+
+static struct tpacpi_rfk *tpacpi_rfkill_switches[TPACPI_RFK_SW_MAX];
+
+/* Query FW and update rfkill sw state for a given rfkill switch */
+static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
+{
+	int status;
+
+	if (!tp_rfk)
+		return -ENODEV;
+
+	status = (tp_rfk->ops->get_status)();
+	if (status < 0)
+		return status;
+
+	rfkill_set_sw_state(tp_rfk->rfkill,
+			    (status == TPACPI_RFK_RADIO_OFF));
+
+	return status;
+}
+
+/* Query FW and update rfkill sw state for all rfkill switches */
+static void tpacpi_rfk_update_swstate_all(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
+		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
+}
+
+/*
+ * Sync the HW-blocking state of all rfkill switches,
+ * do notice it causes the rfkill core to schedule uevents
+ */
+static void tpacpi_rfk_update_hwblock_state(bool blocked)
+{
+	unsigned int i;
+	struct tpacpi_rfk *tp_rfk;
+
+	for (i = 0; i < TPACPI_RFK_SW_MAX; i++) {
+		tp_rfk = tpacpi_rfkill_switches[i];
+		if (tp_rfk) {
+			if (rfkill_set_hw_state(tp_rfk->rfkill,
+						blocked)) {
+				/* ignore -- we track sw block */
+			}
+		}
+	}
+}
+
+/* Call to get the WLSW state from the firmware */
+static int hotkey_get_wlsw(void);
+
+/* Call to query WLSW state and update all rfkill switches */
+static bool tpacpi_rfk_check_hwblock_state(void)
+{
+	int res = hotkey_get_wlsw();
+	int hw_blocked;
+
+	/* When unknown or unsupported, we have to assume it is unblocked */
+	if (res < 0)
+		return false;
+
+	hw_blocked = (res == TPACPI_RFK_RADIO_OFF);
+	tpacpi_rfk_update_hwblock_state(hw_blocked);
+
+	return hw_blocked;
+}
+
+static int tpacpi_rfk_hook_set_block(void *data, bool blocked)
+{
+	struct tpacpi_rfk *tp_rfk = data;
+	int res;
+
+	dbg_printk(TPACPI_DBG_RFKILL,
+		   "request to change radio state to %s\n",
+		   blocked ? "blocked" : "unblocked");
+
+	/* try to set radio state */
+	res = (tp_rfk->ops->set_status)(blocked ?
+				TPACPI_RFK_RADIO_OFF : TPACPI_RFK_RADIO_ON);
+
+	/* and update the rfkill core with whatever the FW really did */
+	tpacpi_rfk_update_swstate(tp_rfk);
+
+	return (res < 0) ? res : 0;
+}
+
+static const struct rfkill_ops tpacpi_rfk_rfkill_ops = {
+	.set_block = tpacpi_rfk_hook_set_block,
+};
+
+static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
+			const struct tpacpi_rfk_ops *tp_rfkops,
 			const enum rfkill_type rfktype,
 			const char *name,
-			const bool set_default,
-			int (*toggle_radio)(void *, enum rfkill_state),
-			int (*get_state)(void *, enum rfkill_state *))
+			const bool set_default)
 {
+	struct tpacpi_rfk *atp_rfk;
 	int res;
-	enum rfkill_state initial_state = RFKILL_STATE_SOFT_BLOCKED;
-
-	res = get_state(NULL, &initial_state);
-	if (res < 0) {
-		printk(TPACPI_ERR
-			"failed to read initial state for %s, error %d; "
-			"will turn radio off\n", name, res);
-	} else if (set_default) {
-		/* try to set the initial state as the default for the rfkill
-		 * type, since we ask the firmware to preserve it across S5 in
-		 * NVRAM */
-		if (rfkill_set_default(rfktype,
-				(initial_state == RFKILL_STATE_UNBLOCKED) ?
-					RFKILL_STATE_UNBLOCKED :
-					RFKILL_STATE_SOFT_BLOCKED) == -EPERM)
-			vdbg_printk(TPACPI_DBG_RFKILL,
-				    "Default state for %s cannot be changed\n",
-				    name);
-	}
-
-	*rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype);
-	if (!*rfk) {
+	bool initial_sw_state = false;
+	int initial_sw_status;
+
+	BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]);
+
+	atp_rfk = kzalloc(sizeof(struct tpacpi_rfk), GFP_KERNEL);
+	if (atp_rfk)
+		atp_rfk->rfkill = rfkill_alloc(name,
+						&tpacpi_pdev->dev,
+						rfktype,
+						&tpacpi_rfk_rfkill_ops,
+						atp_rfk);
+	if (!atp_rfk || !atp_rfk->rfkill) {
 		printk(TPACPI_ERR
 			"failed to allocate memory for rfkill class\n");
+		kfree(atp_rfk);
 		return -ENOMEM;
 	}
 
-	(*rfk)->name = name;
-	(*rfk)->get_state = get_state;
-	(*rfk)->toggle_radio = toggle_radio;
-	(*rfk)->state = initial_state;
+	atp_rfk->id = id;
+	atp_rfk->ops = tp_rfkops;
+
+	initial_sw_status = (tp_rfkops->get_status)();
+	if (initial_sw_status < 0) {
+		printk(TPACPI_ERR
+			"failed to read initial state for %s, error %d\n",
+			name, initial_sw_status);
+	} else {
+		initial_sw_state = (initial_sw_status == TPACPI_RFK_RADIO_OFF);
+		if (set_default) {
+			/* try to keep the initial state, since we ask the
+			 * firmware to preserve it across S5 in NVRAM */
+			rfkill_set_sw_state(atp_rfk->rfkill, initial_sw_state);
+		}
+	}
+	rfkill_set_hw_state(atp_rfk->rfkill, tpacpi_rfk_check_hwblock_state());
 
-	res = rfkill_register(*rfk);
+	res = rfkill_register(atp_rfk->rfkill);
 	if (res < 0) {
 		printk(TPACPI_ERR
 			"failed to register %s rfkill switch: %d\n",
 			name, res);
-		rfkill_free(*rfk);
-		*rfk = NULL;
+		rfkill_destroy(atp_rfk->rfkill);
+		kfree(atp_rfk);
 		return res;
 	}
 
+	tpacpi_rfkill_switches[id] = atp_rfk;
 	return 0;
 }
 
-static void printk_deprecated_attribute(const char * const what,
-					const char * const details)
+static void tpacpi_destroy_rfkill(const enum tpacpi_rfk_id id)
 {
-	tpacpi_log_usertask("deprecated sysfs attribute");
-	printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and "
-		"will be removed. %s\n",
-		what, details);
+	struct tpacpi_rfk *tp_rfk;
+
+	BUG_ON(id >= TPACPI_RFK_SW_MAX);
+
+	tp_rfk = tpacpi_rfkill_switches[id];
+	if (tp_rfk) {
+		rfkill_unregister(tp_rfk->rfkill);
+		tpacpi_rfkill_switches[id] = NULL;
+		kfree(tp_rfk);
+	}
 }
 
 static void printk_deprecated_rfkill_attribute(const char * const what)
@@ -1074,6 +1234,112 @@ static void printk_deprecated_rfkill_attribute(const char * const what)
 			"Please switch to generic rfkill before year 2010");
 }
 
+/* sysfs <radio> enable ------------------------------------------------ */
+static ssize_t tpacpi_rfk_sysfs_enable_show(const enum tpacpi_rfk_id id,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	int status;
+
+	printk_deprecated_rfkill_attribute(attr->attr.name);
+
+	/* This is in the ABI... */
+	if (tpacpi_rfk_check_hwblock_state()) {
+		status = TPACPI_RFK_RADIO_OFF;
+	} else {
+		status = tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
+		if (status < 0)
+			return status;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			(status == TPACPI_RFK_RADIO_ON) ? 1 : 0);
+}
+
+static ssize_t tpacpi_rfk_sysfs_enable_store(const enum tpacpi_rfk_id id,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long t;
+	int res;
+
+	printk_deprecated_rfkill_attribute(attr->attr.name);
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	tpacpi_disclose_usertask(attr->attr.name, "set to %ld\n", t);
+
+	/* This is in the ABI... */
+	if (tpacpi_rfk_check_hwblock_state() && !!t)
+		return -EPERM;
+
+	res = tpacpi_rfkill_switches[id]->ops->set_status((!!t) ?
+				TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF);
+	tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
+
+	return (res < 0) ? res : count;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, char *p)
+{
+	int len = 0;
+
+	if (id >= TPACPI_RFK_SW_MAX)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else {
+		int status;
+
+		/* This is in the ABI... */
+		if (tpacpi_rfk_check_hwblock_state()) {
+			status = TPACPI_RFK_RADIO_OFF;
+		} else {
+			status = tpacpi_rfk_update_swstate(
+						tpacpi_rfkill_switches[id]);
+			if (status < 0)
+				return status;
+		}
+
+		len += sprintf(p + len, "status:\t\t%s\n",
+				(status == TPACPI_RFK_RADIO_ON) ?
+					"enabled" : "disabled");
+		len += sprintf(p + len, "commands:\tenable, disable\n");
+	}
+
+	return len;
+}
+
+static int tpacpi_rfk_procfs_write(const enum tpacpi_rfk_id id, char *buf)
+{
+	char *cmd;
+	int status = -1;
+	int res = 0;
+
+	if (id >= TPACPI_RFK_SW_MAX)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "enable") == 0)
+			status = TPACPI_RFK_RADIO_ON;
+		else if (strlencmp(cmd, "disable") == 0)
+			status = TPACPI_RFK_RADIO_OFF;
+		else
+			return -EINVAL;
+	}
+
+	if (status != -1) {
+		tpacpi_disclose_usertask("procfs", "attempt to %s %s\n",
+				(status == TPACPI_RFK_RADIO_ON) ?
+						"enable" : "disable",
+				tpacpi_rfkill_names[id]);
+		res = (tpacpi_rfkill_switches[id]->ops->set_status)(status);
+		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
+	}
+
+	return res;
+}
+
 /*************************************************************************
  * thinkpad-acpi driver attributes
  */
@@ -1127,8 +1393,6 @@ static DRIVER_ATTR(version, S_IRUGO,
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 
-static void tpacpi_send_radiosw_update(void);
-
 /* wlsw_emulstate ------------------------------------------------------ */
 static ssize_t tpacpi_driver_wlsw_emulstate_show(struct device_driver *drv,
 						char *buf)
@@ -1144,11 +1408,10 @@ static ssize_t tpacpi_driver_wlsw_emulstate_store(struct device_driver *drv,
 	if (parse_strtoul(buf, 1, &t))
 		return -EINVAL;
 
-	if (tpacpi_wlsw_emulstate != t) {
-		tpacpi_wlsw_emulstate = !!t;
-		tpacpi_send_radiosw_update();
-	} else
+	if (tpacpi_wlsw_emulstate != !!t) {
 		tpacpi_wlsw_emulstate = !!t;
+		tpacpi_rfk_update_hwblock_state(!t);	/* negative logic */
+	}
 
 	return count;
 }
@@ -1463,17 +1726,23 @@ static struct attribute_set *hotkey_dev_attributes;
 /* HKEY.MHKG() return bits */
 #define TP_HOTKEY_TABLET_MASK (1 << 3)
 
-static int hotkey_get_wlsw(int *status)
+static int hotkey_get_wlsw(void)
 {
+	int status;
+
+	if (!tp_features.hotkey_wlsw)
+		return -ENODEV;
+
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
-	if (dbg_wlswemul) {
-		*status = !!tpacpi_wlsw_emulstate;
-		return 0;
-	}
+	if (dbg_wlswemul)
+		return (tpacpi_wlsw_emulstate) ?
+				TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
-	if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
+
+	if (!acpi_evalf(hkey_handle, &status, "WLSW", "d"))
 		return -EIO;
-	return 0;
+
+	return (status) ? TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
 static int hotkey_get_tablet_mode(int *status)
@@ -2107,12 +2376,16 @@ static ssize_t hotkey_radio_sw_show(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int res, s;
-	res = hotkey_get_wlsw(&s);
+	int res;
+	res = hotkey_get_wlsw();
 	if (res < 0)
 		return res;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", !!s);
+	/* Opportunistic update */
+	tpacpi_rfk_update_hwblock_state((res == TPACPI_RFK_RADIO_OFF));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			(res == TPACPI_RFK_RADIO_OFF) ? 0 : 1);
 }
 
 static struct device_attribute dev_attr_hotkey_radio_sw =
@@ -2223,30 +2496,52 @@ static struct attribute *hotkey_mask_attributes[] __initdata = {
 	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
 };
 
-static void bluetooth_update_rfk(void);
-static void wan_update_rfk(void);
-static void uwb_update_rfk(void);
+/*
+ * Sync both the hw and sw blocking state of all switches
+ */
 static void tpacpi_send_radiosw_update(void)
 {
 	int wlsw;
 
-	/* Sync these BEFORE sending any rfkill events */
-	if (tp_features.bluetooth)
-		bluetooth_update_rfk();
-	if (tp_features.wan)
-		wan_update_rfk();
-	if (tp_features.uwb)
-		uwb_update_rfk();
+	/*
+	 * We must sync all rfkill controllers *before* issuing any
+	 * rfkill input events, or we will race the rfkill core input
+	 * handler.
+	 *
+	 * tpacpi_inputdev_send_mutex works as a syncronization point
+	 * for the above.
+	 *
+	 * We optimize to avoid numerous calls to hotkey_get_wlsw.
+	 */
+
+	wlsw = hotkey_get_wlsw();
+
+	/* Sync hw blocking state first if it is hw-blocked */
+	if (wlsw == TPACPI_RFK_RADIO_OFF)
+		tpacpi_rfk_update_hwblock_state(true);
 
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
+	/* Sync sw blocking state */
+	tpacpi_rfk_update_swstate_all();
+
+	/* Sync hw blocking state last if it is hw-unblocked */
+	if (wlsw == TPACPI_RFK_RADIO_ON)
+		tpacpi_rfk_update_hwblock_state(false);
+
+	/* Issue rfkill input event for WLSW switch */
+	if (!(wlsw < 0)) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
 
 		input_report_switch(tpacpi_inputdev,
-				    SW_RFKILL_ALL, !!wlsw);
+				    SW_RFKILL_ALL, (wlsw > 0));
 		input_sync(tpacpi_inputdev);
 
 		mutex_unlock(&tpacpi_inputdev_send_mutex);
 	}
+
+	/*
+	 * this can be unconditional, as we will poll state again
+	 * if userspace uses the notify to read data
+	 */
 	hotkey_radio_sw_notify_change();
 }
 
@@ -3056,8 +3351,6 @@ enum {
 
 #define TPACPI_RFK_BLUETOOTH_SW_NAME	"tpacpi_bluetooth_sw"
 
-static struct rfkill *tpacpi_bluetooth_rfkill;
-
 static void bluetooth_suspend(pm_message_t state)
 {
 	/* Try to make sure radio will resume powered off */
@@ -3067,83 +3360,47 @@ static void bluetooth_suspend(pm_message_t state)
 			"bluetooth power down on resume request failed\n");
 }
 
-static int bluetooth_get_radiosw(void)
+static int bluetooth_get_status(void)
 {
 	int status;
 
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	/* WLSW overrides bluetooth in firmware/hardware, reflect that */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return RFKILL_STATE_HARD_BLOCKED;
-
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_bluetoothemul)
 		return (tpacpi_bluetooth_emulstate) ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+		       TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
 
 	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
 		return -EIO;
 
 	return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0) ?
-		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
-}
-
-static void bluetooth_update_rfk(void)
-{
-	int status;
-
-	if (!tpacpi_bluetooth_rfkill)
-		return;
-
-	status = bluetooth_get_radiosw();
-	if (status < 0)
-		return;
-	rfkill_force_state(tpacpi_bluetooth_rfkill, status);
-
-	vdbg_printk(TPACPI_DBG_RFKILL,
-		"forced rfkill state to %d\n",
-		status);
+			TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
-static int bluetooth_set_radiosw(int radio_on, int update_rfk)
+static int bluetooth_set_status(enum tpacpi_rfkill_state state)
 {
 	int status;
 
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	/* WLSW overrides bluetooth in firmware/hardware, but there is no
-	 * reason to risk weird behaviour. */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
-	    && radio_on)
-		return -EPERM;
-
 	vdbg_printk(TPACPI_DBG_RFKILL,
-		"will %s bluetooth\n", radio_on ? "enable" : "disable");
+		"will attempt to %s bluetooth\n",
+		(state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_bluetoothemul) {
-		tpacpi_bluetooth_emulstate = !!radio_on;
-		if (update_rfk)
-			bluetooth_update_rfk();
+		tpacpi_bluetooth_emulstate = (state == TPACPI_RFK_RADIO_ON);
 		return 0;
 	}
 #endif
 
 	/* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
-	if (radio_on)
+	if (state == TPACPI_RFK_RADIO_ON)
 		status = TP_ACPI_BLUETOOTH_RADIOSSW;
 	else
 		status = 0;
+
 	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
 		return -EIO;
 
-	if (update_rfk)
-		bluetooth_update_rfk();
-
 	return 0;
 }
 
@@ -3152,35 +3409,16 @@ static ssize_t bluetooth_enable_show(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int status;
-
-	printk_deprecated_rfkill_attribute("bluetooth_enable");
-
-	status = bluetooth_get_radiosw();
-	if (status < 0)
-		return status;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			(status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
+	return tpacpi_rfk_sysfs_enable_show(TPACPI_RFK_BLUETOOTH_SW_ID,
+			attr, buf);
 }
 
 static ssize_t bluetooth_enable_store(struct device *dev,
 			    struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	unsigned long t;
-	int res;
-
-	printk_deprecated_rfkill_attribute("bluetooth_enable");
-
-	if (parse_strtoul(buf, 1, &t))
-		return -EINVAL;
-
-	tpacpi_disclose_usertask("bluetooth_enable", "set to %ld\n", t);
-
-	res = bluetooth_set_radiosw(t, 1);
-
-	return (res) ? res : count;
+	return tpacpi_rfk_sysfs_enable_store(TPACPI_RFK_BLUETOOTH_SW_ID,
+				attr, buf, count);
 }
 
 static struct device_attribute dev_attr_bluetooth_enable =
@@ -3198,23 +3436,10 @@ static const struct attribute_group bluetooth_attr_group = {
 	.attrs = bluetooth_attributes,
 };
 
-static int tpacpi_bluetooth_rfk_get(void *data, enum rfkill_state *state)
-{
-	int bts = bluetooth_get_radiosw();
-
-	if (bts < 0)
-		return bts;
-
-	*state = bts;
-	return 0;
-}
-
-static int tpacpi_bluetooth_rfk_set(void *data, enum rfkill_state state)
-{
-	dbg_printk(TPACPI_DBG_RFKILL,
-		   "request to change radio state to %d\n", state);
-	return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
-}
+static const struct tpacpi_rfk_ops bluetooth_tprfk_ops = {
+	.get_status = bluetooth_get_status,
+	.set_status = bluetooth_set_status,
+};
 
 static void bluetooth_shutdown(void)
 {
@@ -3230,13 +3455,12 @@ static void bluetooth_shutdown(void)
 
 static void bluetooth_exit(void)
 {
-	bluetooth_shutdown();
-
-	if (tpacpi_bluetooth_rfkill)
-		rfkill_unregister(tpacpi_bluetooth_rfkill);
-
 	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
 			&bluetooth_attr_group);
+
+	tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID);
+
+	bluetooth_shutdown();
 }
 
 static int __init bluetooth_init(struct ibm_init_struct *iibm)
@@ -3277,20 +3501,18 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 	if (!tp_features.bluetooth)
 		return 1;
 
-	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-				&bluetooth_attr_group);
-	if (res)
-		return res;
-
 	res = tpacpi_new_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID,
-				&tpacpi_bluetooth_rfkill,
+				&bluetooth_tprfk_ops,
 				RFKILL_TYPE_BLUETOOTH,
 				TPACPI_RFK_BLUETOOTH_SW_NAME,
-				true,
-				tpacpi_bluetooth_rfk_set,
-				tpacpi_bluetooth_rfk_get);
+				true);
+	if (res)
+		return res;
+
+	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&bluetooth_attr_group);
 	if (res) {
-		bluetooth_exit();
+		tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID);
 		return res;
 	}
 
@@ -3300,46 +3522,12 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 /* procfs -------------------------------------------------------------- */
 static int bluetooth_read(char *p)
 {
-	int len = 0;
-	int status = bluetooth_get_radiosw();
-
-	if (!tp_features.bluetooth)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n",
-				(status == RFKILL_STATE_UNBLOCKED) ?
-					"enabled" : "disabled");
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
+	return tpacpi_rfk_procfs_read(TPACPI_RFK_BLUETOOTH_SW_ID, p);
 }
 
 static int bluetooth_write(char *buf)
 {
-	char *cmd;
-	int state = -1;
-
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			state = 1;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			state = 0;
-		} else
-			return -EINVAL;
-	}
-
-	if (state != -1) {
-		tpacpi_disclose_usertask("procfs bluetooth",
-			"attempt to %s\n",
-			state ? "enable" : "disable");
-		bluetooth_set_radiosw(state, 1);
-	}
-
-	return 0;
+	return tpacpi_rfk_procfs_write(TPACPI_RFK_BLUETOOTH_SW_ID, buf);
 }
 
 static struct ibm_struct bluetooth_driver_data = {
@@ -3365,8 +3553,6 @@ enum {
 
 #define TPACPI_RFK_WWAN_SW_NAME		"tpacpi_wwan_sw"
 
-static struct rfkill *tpacpi_wan_rfkill;
-
 static void wan_suspend(pm_message_t state)
 {
 	/* Try to make sure radio will resume powered off */
@@ -3376,83 +3562,47 @@ static void wan_suspend(pm_message_t state)
 			"WWAN power down on resume request failed\n");
 }
 
-static int wan_get_radiosw(void)
+static int wan_get_status(void)
 {
 	int status;
 
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	/* WLSW overrides WWAN in firmware/hardware, reflect that */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return RFKILL_STATE_HARD_BLOCKED;
-
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_wwanemul)
 		return (tpacpi_wwan_emulstate) ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+		       TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
 
 	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
 		return -EIO;
 
 	return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0) ?
-		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
-}
-
-static void wan_update_rfk(void)
-{
-	int status;
-
-	if (!tpacpi_wan_rfkill)
-		return;
-
-	status = wan_get_radiosw();
-	if (status < 0)
-		return;
-	rfkill_force_state(tpacpi_wan_rfkill, status);
-
-	vdbg_printk(TPACPI_DBG_RFKILL,
-		"forced rfkill state to %d\n",
-		status);
+			TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
-static int wan_set_radiosw(int radio_on, int update_rfk)
+static int wan_set_status(enum tpacpi_rfkill_state state)
 {
 	int status;
 
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	/* WLSW overrides bluetooth in firmware/hardware, but there is no
-	 * reason to risk weird behaviour. */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
-	    && radio_on)
-		return -EPERM;
-
 	vdbg_printk(TPACPI_DBG_RFKILL,
-		"will %s WWAN\n", radio_on ? "enable" : "disable");
+		"will attempt to %s wwan\n",
+		(state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_wwanemul) {
-		tpacpi_wwan_emulstate = !!radio_on;
-		if (update_rfk)
-			wan_update_rfk();
+		tpacpi_wwan_emulstate = (state == TPACPI_RFK_RADIO_ON);
 		return 0;
 	}
 #endif
 
 	/* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */
-	if (radio_on)
+	if (state == TPACPI_RFK_RADIO_ON)
 		status = TP_ACPI_WANCARD_RADIOSSW;
 	else
 		status = 0;
+
 	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
 		return -EIO;
 
-	if (update_rfk)
-		wan_update_rfk();
-
 	return 0;
 }
 
@@ -3461,35 +3611,16 @@ static ssize_t wan_enable_show(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int status;
-
-	printk_deprecated_rfkill_attribute("wwan_enable");
-
-	status = wan_get_radiosw();
-	if (status < 0)
-		return status;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			(status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
+	return tpacpi_rfk_sysfs_enable_show(TPACPI_RFK_WWAN_SW_ID,
+			attr, buf);
 }
 
 static ssize_t wan_enable_store(struct device *dev,
 			    struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	unsigned long t;
-	int res;
-
-	printk_deprecated_rfkill_attribute("wwan_enable");
-
-	if (parse_strtoul(buf, 1, &t))
-		return -EINVAL;
-
-	tpacpi_disclose_usertask("wwan_enable", "set to %ld\n", t);
-
-	res = wan_set_radiosw(t, 1);
-
-	return (res) ? res : count;
+	return tpacpi_rfk_sysfs_enable_store(TPACPI_RFK_WWAN_SW_ID,
+			attr, buf, count);
 }
 
 static struct device_attribute dev_attr_wan_enable =
@@ -3507,23 +3638,10 @@ static const struct attribute_group wan_attr_group = {
 	.attrs = wan_attributes,
 };
 
-static int tpacpi_wan_rfk_get(void *data, enum rfkill_state *state)
-{
-	int wans = wan_get_radiosw();
-
-	if (wans < 0)
-		return wans;
-
-	*state = wans;
-	return 0;
-}
-
-static int tpacpi_wan_rfk_set(void *data, enum rfkill_state state)
-{
-	dbg_printk(TPACPI_DBG_RFKILL,
-		   "request to change radio state to %d\n", state);
-	return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
-}
+static const struct tpacpi_rfk_ops wan_tprfk_ops = {
+	.get_status = wan_get_status,
+	.set_status = wan_set_status,
+};
 
 static void wan_shutdown(void)
 {
@@ -3539,13 +3657,12 @@ static void wan_shutdown(void)
 
 static void wan_exit(void)
 {
-	wan_shutdown();
-
-	if (tpacpi_wan_rfkill)
-		rfkill_unregister(tpacpi_wan_rfkill);
-
 	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
 		&wan_attr_group);
+
+	tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID);
+
+	wan_shutdown();
 }
 
 static int __init wan_init(struct ibm_init_struct *iibm)
@@ -3584,20 +3701,19 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 	if (!tp_features.wan)
 		return 1;
 
-	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-				&wan_attr_group);
-	if (res)
-		return res;
-
 	res = tpacpi_new_rfkill(TPACPI_RFK_WWAN_SW_ID,
-				&tpacpi_wan_rfkill,
+				&wan_tprfk_ops,
 				RFKILL_TYPE_WWAN,
 				TPACPI_RFK_WWAN_SW_NAME,
-				true,
-				tpacpi_wan_rfk_set,
-				tpacpi_wan_rfk_get);
+				true);
+	if (res)
+		return res;
+
+	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&wan_attr_group);
+
 	if (res) {
-		wan_exit();
+		tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID);
 		return res;
 	}
 
@@ -3607,48 +3723,12 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 /* procfs -------------------------------------------------------------- */
 static int wan_read(char *p)
 {
-	int len = 0;
-	int status = wan_get_radiosw();
-
-	tpacpi_disclose_usertask("procfs wan", "read");
-
-	if (!tp_features.wan)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n",
-				(status == RFKILL_STATE_UNBLOCKED) ?
-					"enabled" : "disabled");
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
+	return tpacpi_rfk_procfs_read(TPACPI_RFK_WWAN_SW_ID, p);
 }
 
 static int wan_write(char *buf)
 {
-	char *cmd;
-	int state = -1;
-
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			state = 1;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			state = 0;
-		} else
-			return -EINVAL;
-	}
-
-	if (state != -1) {
-		tpacpi_disclose_usertask("procfs wan",
-			"attempt to %s\n",
-			state ? "enable" : "disable");
-		wan_set_radiosw(state, 1);
-	}
-
-	return 0;
+	return tpacpi_rfk_procfs_write(TPACPI_RFK_WWAN_SW_ID, buf);
 }
 
 static struct ibm_struct wan_driver_data = {
@@ -3672,108 +3752,59 @@ enum {
 
 #define TPACPI_RFK_UWB_SW_NAME	"tpacpi_uwb_sw"
 
-static struct rfkill *tpacpi_uwb_rfkill;
-
-static int uwb_get_radiosw(void)
+static int uwb_get_status(void)
 {
 	int status;
 
-	if (!tp_features.uwb)
-		return -ENODEV;
-
-	/* WLSW overrides UWB in firmware/hardware, reflect that */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return RFKILL_STATE_HARD_BLOCKED;
-
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_uwbemul)
 		return (tpacpi_uwb_emulstate) ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+		       TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
 
 	if (!acpi_evalf(hkey_handle, &status, "GUWB", "d"))
 		return -EIO;
 
 	return ((status & TP_ACPI_UWB_RADIOSSW) != 0) ?
-		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+			TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
-static void uwb_update_rfk(void)
+static int uwb_set_status(enum tpacpi_rfkill_state state)
 {
 	int status;
 
-	if (!tpacpi_uwb_rfkill)
-		return;
-
-	status = uwb_get_radiosw();
-	if (status < 0)
-		return;
-	rfkill_force_state(tpacpi_uwb_rfkill, status);
-
 	vdbg_printk(TPACPI_DBG_RFKILL,
-		"forced rfkill state to %d\n",
-		status);
-}
-
-static int uwb_set_radiosw(int radio_on, int update_rfk)
-{
-	int status;
-
-	if (!tp_features.uwb)
-		return -ENODEV;
-
-	/* WLSW overrides UWB in firmware/hardware, but there is no
-	 * reason to risk weird behaviour. */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
-	    && radio_on)
-		return -EPERM;
-
-	vdbg_printk(TPACPI_DBG_RFKILL,
-			"will %s UWB\n", radio_on ? "enable" : "disable");
+		"will attempt to %s UWB\n",
+		(state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_uwbemul) {
-		tpacpi_uwb_emulstate = !!radio_on;
-		if (update_rfk)
-			uwb_update_rfk();
+		tpacpi_uwb_emulstate = (state == TPACPI_RFK_RADIO_ON);
 		return 0;
 	}
 #endif
 
-	status = (radio_on) ? TP_ACPI_UWB_RADIOSSW : 0;
+	if (state == TPACPI_RFK_RADIO_ON)
+		status = TP_ACPI_UWB_RADIOSSW;
+	else
+		status = 0;
+
 	if (!acpi_evalf(hkey_handle, NULL, "SUWB", "vd", status))
 		return -EIO;
 
-	if (update_rfk)
-		uwb_update_rfk();
-
 	return 0;
 }
 
 /* --------------------------------------------------------------------- */
 
-static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state)
-{
-	int uwbs = uwb_get_radiosw();
-
-	if (uwbs < 0)
-		return uwbs;
-
-	*state = uwbs;
-	return 0;
-}
-
-static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state)
-{
-	dbg_printk(TPACPI_DBG_RFKILL,
-		   "request to change radio state to %d\n", state);
-	return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
-}
+static const struct tpacpi_rfk_ops uwb_tprfk_ops = {
+	.get_status = uwb_get_status,
+	.set_status = uwb_set_status,
+};
 
 static void uwb_exit(void)
 {
-	if (tpacpi_uwb_rfkill)
-		rfkill_unregister(tpacpi_uwb_rfkill);
+	tpacpi_destroy_rfkill(TPACPI_RFK_UWB_SW_ID);
 }
 
 static int __init uwb_init(struct ibm_init_struct *iibm)
@@ -3813,13 +3844,10 @@ static int __init uwb_init(struct ibm_init_struct *iibm)
 		return 1;
 
 	res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID,
-				&tpacpi_uwb_rfkill,
+				&uwb_tprfk_ops,
 				RFKILL_TYPE_UWB,
 				TPACPI_RFK_UWB_SW_NAME,
-				false,
-				tpacpi_uwb_rfk_set,
-				tpacpi_uwb_rfk_get);
-
+				false);
 	return res;
 }
 
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 9f187265db8..81d31ea507d 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -45,7 +45,6 @@
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>
-#include <linux/input-polldev.h>
 
 #include <asm/uaccess.h>
 
@@ -250,21 +249,15 @@ static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result)
 
 struct toshiba_acpi_dev {
 	struct platform_device *p_dev;
-	struct rfkill *rfk_dev;
-	struct input_polled_dev *poll_dev;
+	struct rfkill *bt_rfk;
 
 	const char *bt_name;
-	const char *rfk_name;
-
-	bool last_rfk_state;
 
 	struct mutex mutex;
 };
 
 static struct toshiba_acpi_dev toshiba_acpi = {
 	.bt_name = "Toshiba Bluetooth",
-	.rfk_name = "Toshiba RFKill Switch",
-	.last_rfk_state = false,
 };
 
 /* Bluetooth rfkill handlers */
@@ -283,21 +276,6 @@ static u32 hci_get_bt_present(bool *present)
 	return hci_result;
 }
 
-static u32 hci_get_bt_on(bool *on)
-{
-	u32 hci_result;
-	u32 value, value2;
-
-	value = 0;
-	value2 = 0x0001;
-	hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
-	if (hci_result == HCI_SUCCESS)
-		*on = (value & HCI_WIRELESS_BT_POWER) &&
-		      (value & HCI_WIRELESS_BT_ATTACH);
-
-	return hci_result;
-}
-
 static u32 hci_get_radio_state(bool *radio_state)
 {
 	u32 hci_result;
@@ -311,70 +289,67 @@ static u32 hci_get_radio_state(bool *radio_state)
 	return hci_result;
 }
 
-static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
+static int bt_rfkill_set_block(void *data, bool blocked)
 {
+	struct toshiba_acpi_dev *dev = data;
 	u32 result1, result2;
 	u32 value;
+	int err;
 	bool radio_state;
-	struct toshiba_acpi_dev *dev = data;
 
-	value = (state == RFKILL_STATE_UNBLOCKED);
+	value = (blocked == false);
 
-	if (hci_get_radio_state(&radio_state) != HCI_SUCCESS)
-		return -EFAULT;
+	mutex_lock(&dev->mutex);
+	if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) {
+		err = -EBUSY;
+		goto out;
+	}
 
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (!radio_state)
-			return -EPERM;
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		break;
-	default:
-		return -EINVAL;
+	if (!radio_state) {
+		err = 0;
+		goto out;
 	}
 
-	mutex_lock(&dev->mutex);
 	hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
 	hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
-	mutex_unlock(&dev->mutex);
 
 	if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS)
-		return -EFAULT;
-
-	return 0;
+		err = -EBUSY;
+	else
+		err = 0;
+ out:
+	mutex_unlock(&dev->mutex);
+	return err;
 }
 
-static void bt_poll_rfkill(struct input_polled_dev *poll_dev)
+static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
 {
-	bool state_changed;
 	bool new_rfk_state;
 	bool value;
 	u32 hci_result;
-	struct toshiba_acpi_dev *dev = poll_dev->private;
+	struct toshiba_acpi_dev *dev = data;
+
+	mutex_lock(&dev->mutex);
 
 	hci_result = hci_get_radio_state(&value);
-	if (hci_result != HCI_SUCCESS)
-		return; /* Can't do anything useful */
+	if (hci_result != HCI_SUCCESS) {
+		/* Can't do anything useful */
+		mutex_unlock(&dev->mutex);
+	}
 
 	new_rfk_state = value;
 
-	mutex_lock(&dev->mutex);
-	state_changed = new_rfk_state != dev->last_rfk_state;
-	dev->last_rfk_state = new_rfk_state;
 	mutex_unlock(&dev->mutex);
 
-	if (unlikely(state_changed)) {
-		rfkill_force_state(dev->rfk_dev,
-				   new_rfk_state ?
-				   RFKILL_STATE_SOFT_BLOCKED :
-				   RFKILL_STATE_HARD_BLOCKED);
-		input_report_switch(poll_dev->input, SW_RFKILL_ALL,
-				    new_rfk_state);
-		input_sync(poll_dev->input);
-	}
+	if (rfkill_set_hw_state(rfkill, !new_rfk_state))
+		bt_rfkill_set_block(data, true);
 }
 
+static const struct rfkill_ops toshiba_rfk_ops = {
+	.set_block = bt_rfkill_set_block,
+	.poll = bt_rfkill_poll,
+};
+
 static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
 static struct backlight_device *toshiba_backlight_device;
 static int force_fan;
@@ -702,14 +677,11 @@ static struct backlight_ops toshiba_backlight_data = {
 
 static void toshiba_acpi_exit(void)
 {
-	if (toshiba_acpi.poll_dev) {
-		input_unregister_polled_device(toshiba_acpi.poll_dev);
-		input_free_polled_device(toshiba_acpi.poll_dev);
+	if (toshiba_acpi.bt_rfk) {
+		rfkill_unregister(toshiba_acpi.bt_rfk);
+		rfkill_destroy(toshiba_acpi.bt_rfk);
 	}
 
-	if (toshiba_acpi.rfk_dev)
-		rfkill_unregister(toshiba_acpi.rfk_dev);
-
 	if (toshiba_backlight_device)
 		backlight_device_unregister(toshiba_backlight_device);
 
@@ -728,8 +700,6 @@ static int __init toshiba_acpi_init(void)
 	acpi_status status = AE_OK;
 	u32 hci_result;
 	bool bt_present;
-	bool bt_on;
-	bool radio_on;
 	int ret = 0;
 
 	if (acpi_disabled)
@@ -793,61 +763,21 @@ static int __init toshiba_acpi_init(void)
 
 	/* Register rfkill switch for Bluetooth */
 	if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
-		toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev,
-							RFKILL_TYPE_BLUETOOTH);
-		if (!toshiba_acpi.rfk_dev) {
+		toshiba_acpi.bt_rfk = rfkill_alloc(toshiba_acpi.bt_name,
+						   &toshiba_acpi.p_dev->dev,
+						   RFKILL_TYPE_BLUETOOTH,
+						   &toshiba_rfk_ops,
+						   &toshiba_acpi);
+		if (!toshiba_acpi.bt_rfk) {
 			printk(MY_ERR "unable to allocate rfkill device\n");
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
 
-		toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name;
-		toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio;
-		toshiba_acpi.rfk_dev->user_claim_unsupported = 1;
-		toshiba_acpi.rfk_dev->data = &toshiba_acpi;
-
-		if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) {
-			toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED;
-		} else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS &&
-			   radio_on) {
-			toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED;
-		} else {
-			toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED;
-		}
-
-		ret = rfkill_register(toshiba_acpi.rfk_dev);
+		ret = rfkill_register(toshiba_acpi.bt_rfk);
 		if (ret) {
 			printk(MY_ERR "unable to register rfkill device\n");
-			toshiba_acpi_exit();
-			return -ENOMEM;
-		}
-
-		/* Register input device for kill switch */
-		toshiba_acpi.poll_dev = input_allocate_polled_device();
-		if (!toshiba_acpi.poll_dev) {
-			printk(MY_ERR
-			       "unable to allocate kill-switch input device\n");
-			toshiba_acpi_exit();
-			return -ENOMEM;
-		}
-		toshiba_acpi.poll_dev->private = &toshiba_acpi;
-		toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-		toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-		toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-		toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-		/* Toshiba USB ID */
-		toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
-		set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-		set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-		input_report_switch(toshiba_acpi.poll_dev->input,
-				    SW_RFKILL_ALL, TRUE);
-		input_sync(toshiba_acpi.poll_dev->input);
-
-		ret = input_register_polled_device(toshiba_acpi.poll_dev);
-		if (ret) {
-			printk(MY_ERR
-			       "unable to register kill-switch input device\n");
+			rfkill_destroy(toshiba_acpi.bt_rfk);
 			toshiba_acpi_exit();
 			return ret;
 		}
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index f604061d2bb..ba976542788 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -638,6 +638,24 @@ int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t start,
 }
 EXPORT_SYMBOL(pnp_possible_config);
 
+int pnp_range_reserved(resource_size_t start, resource_size_t end)
+{
+	struct pnp_dev *dev;
+	struct pnp_resource *pnp_res;
+	resource_size_t *dev_start, *dev_end;
+
+	pnp_for_each_dev(dev) {
+		list_for_each_entry(pnp_res, &dev->resources, list) {
+			dev_start = &pnp_res->res.start;
+			dev_end   = &pnp_res->res.end;
+			if (ranged_conflict(&start, &end, dev_start, dev_end))
+				return 1;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(pnp_range_reserved);
+
 /* format is: pnp_reserve_irq=irq1[,irq2] .... */
 static int __init pnp_setup_reserve_irq(char *str)
 {
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index f17513dd9d4..88cb7408861 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -706,7 +706,7 @@ static void ps3_sys_manager_work(struct ps3_system_bus_device *dev)
 	ps3_vuart_read_async(dev, PS3_SM_RX_MSG_LEN_MIN);
 }
 
-static int ps3_sys_manager_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3_sys_manager_probe(struct ps3_system_bus_device *dev)
 {
 	int result;
 	struct ps3_sys_manager_ops ops;
diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c
index 235e87fcb49..e82d8c9c6cd 100644
--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -80,12 +80,12 @@ static const struct avset_video_mode {
 	{     0, }, /* auto */
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_480I,       A_N,  720,  480},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_480P,       A_N,  720,  480},
-	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_60HZ,  A_N, 1280,  720},
+	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_60HZ,  A_W, 1280,  720},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080I_60HZ, A_W, 1920, 1080},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080P_60HZ, A_W, 1920, 1080},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_576I,       A_N,  720,  576},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_576P,       A_N,  720,  576},
-	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_50HZ,  A_N, 1280,  720},
+	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_50HZ,  A_W, 1280,  720},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080I_50HZ, A_W, 1920, 1080},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080P_50HZ, A_W, 1920, 1080},
 	{  RGB8, XRGB, PS3AV_CMD_VIDEO_VID_WXGA,       A_W, 1280,  768},
@@ -937,7 +937,7 @@ int ps3av_audio_mute(int mute)
 
 EXPORT_SYMBOL_GPL(ps3av_audio_mute);
 
-static int ps3av_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3av_probe(struct ps3_system_bus_device *dev)
 {
 	int res;
 	int id;
@@ -1048,7 +1048,7 @@ static struct ps3_vuart_port_driver ps3av_driver = {
 	.shutdown = ps3av_shutdown,
 };
 
-static int ps3av_module_init(void)
+static int __init ps3av_module_init(void)
 {
 	int error;
 
diff --git a/drivers/ps3/ps3av_cmd.c b/drivers/ps3/ps3av_cmd.c
index 716596e8e5b..f555fedd507 100644
--- a/drivers/ps3/ps3av_cmd.c
+++ b/drivers/ps3/ps3av_cmd.c
@@ -21,9 +21,10 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+
 #include <asm/ps3av.h>
-#include <asm/ps3fb.h>
 #include <asm/ps3.h>
+#include <asm/ps3gpu.h>
 
 #include "vuart.h"
 
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 74d0bfa3f31..3b78540288c 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -290,7 +290,7 @@ static void __devinit rio_add_device(struct rio_dev *rdev)
  * to a RIO device on success or NULL on failure.
  *
  */
-static struct rio_dev *rio_setup_device(struct rio_net *net,
+static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 					struct rio_mport *port, u16 destid,
 					u8 hopcount, int do_enum)
 {
@@ -559,7 +559,7 @@ static void rio_net_add_mport(struct rio_net *net, struct rio_mport *port)
  * Recursively enumerates a RIO network.  Transactions are sent via the
  * master port passed in @port.
  */
-static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 			 u8 hopcount)
 {
 	int port_num;
@@ -718,7 +718,7 @@ static int rio_enum_complete(struct rio_mport *port)
  * Recursively discovers a RIO network.  Transactions are sent via the
  * master port passed in @port.
  */
-static int
+static int __devinit
 rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 	      u8 hopcount)
 {
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e58c0ce65aa..f4317798e47 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -47,6 +47,16 @@ config REGULATOR_VIRTUAL_CONSUMER
 
           If unsure, say no.
 
+config REGULATOR_USERSPACE_CONSUMER
+	tristate "Userspace regulator consumer support"
+	default n
+	help
+	  There are some classes of devices that are controlled entirely
+	  from user space. Usersapce consumer driver provides ability to
+	  control power supplies for such devices.
+
+          If unsure, say no.
+
 config REGULATOR_BQ24022
 	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
 	default n
@@ -56,6 +66,15 @@ config REGULATOR_BQ24022
 	  charging select between 100 mA and 500 mA charging current
 	  limit.
 
+config REGULATOR_MAX1586
+	tristate "Maxim 1586/1587 voltage regulator"
+	depends on I2C
+	default n
+	help
+	  This driver controls a Maxim 1586 or 1587 voltage output
+	  regulator via I2C bus. The provided regulator is suitable
+	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+
 config REGULATOR_TWL4030
 	bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
 	depends on TWL4030_CORE
@@ -91,4 +110,11 @@ config REGULATOR_PCF50633
 	 Say Y here to support the voltage regulators and convertors
 	 on PCF50633
 
+config REGULATOR_LP3971
+	tristate "National Semiconductors LP3971 PMIC regulator driver"
+	depends on I2C
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3971 PMIC
+
 endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bac133afc06..4d762c4cccf 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -6,8 +6,11 @@
 obj-$(CONFIG_REGULATOR) += core.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
+obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index c6628f5a0af..b8b89ef10a8 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -504,7 +504,7 @@ static int __init da903x_regulator_init(void)
 {
 	return platform_driver_register(&da903x_regulator_driver);
 }
-module_init(da903x_regulator_init);
+subsys_initcall(da903x_regulator_init);
 
 static void __exit da903x_regulator_exit(void)
 {
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 23d554628a7..cdc674fb46c 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -44,10 +44,22 @@ static int fixed_voltage_get_voltage(struct regulator_dev *dev)
 	return data->microvolts;
 }
 
+static int fixed_voltage_list_voltage(struct regulator_dev *dev,
+				      unsigned selector)
+{
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	if (selector != 0)
+		return -EINVAL;
+
+	return data->microvolts;
+}
+
 static struct regulator_ops fixed_voltage_ops = {
 	.is_enabled = fixed_voltage_is_enabled,
 	.enable = fixed_voltage_enable,
 	.get_voltage = fixed_voltage_get_voltage,
+	.list_voltage = fixed_voltage_list_voltage,
 };
 
 static int regulator_fixed_voltage_probe(struct platform_device *pdev)
@@ -69,7 +81,8 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 	}
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
-	drvdata->desc.ops = &fixed_voltage_ops,
+	drvdata->desc.ops = &fixed_voltage_ops;
+	drvdata->desc.n_voltages = 1;
 
 	drvdata->microvolts = config->microvolts;
 
@@ -117,7 +130,7 @@ static int __init regulator_fixed_voltage_init(void)
 {
 	return platform_driver_register(&regulator_fixed_voltage_driver);
 }
-module_init(regulator_fixed_voltage_init);
+subsys_initcall(regulator_fixed_voltage_init);
 
 static void __exit regulator_fixed_voltage_exit(void)
 {
@@ -128,3 +141,4 @@ module_exit(regulator_fixed_voltage_exit);
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Fixed voltage regulator");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-fixed-voltage");
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
new file mode 100644
index 00000000000..a61018a2769
--- /dev/null
+++ b/drivers/regulator/lp3971.c
@@ -0,0 +1,562 @@
+/*
+ * Regulator driver for National Semiconductors LP3971 PMIC chip
+ *
+ *  Copyright (C) 2009 Samsung Electronics
+ *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8350.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/lp3971.h>
+
+struct lp3971 {
+	struct device *dev;
+	struct mutex io_lock;
+	struct i2c_client *i2c;
+	int num_regulators;
+	struct regulator_dev **rdev;
+};
+
+static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
+static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
+
+#define LP3971_SYS_CONTROL1_REG 0x07
+
+/* System control register 1 initial value,
+   bits 4 and 5 are EPROM programmable */
+#define SYS_CONTROL1_INIT_VAL 0x40
+#define SYS_CONTROL1_INIT_MASK 0xCF
+
+#define LP3971_BUCK_VOL_ENABLE_REG 0x10
+#define LP3971_BUCK_VOL_CHANGE_REG 0x20
+
+/*	Voltage control registers shift:
+	LP3971_BUCK1 -> 0
+	LP3971_BUCK2 -> 4
+	LP3971_BUCK3 -> 6
+*/
+#define BUCK_VOL_CHANGE_SHIFT(x) (((1 << x) & ~0x01) << 1)
+#define BUCK_VOL_CHANGE_FLAG_GO 0x01
+#define BUCK_VOL_CHANGE_FLAG_TARGET 0x02
+#define BUCK_VOL_CHANGE_FLAG_MASK 0x03
+
+#define LP3971_BUCK1_BASE 0x23
+#define LP3971_BUCK2_BASE 0x29
+#define LP3971_BUCK3_BASE 0x32
+
+const static int buck_base_addr[] = {
+	LP3971_BUCK1_BASE,
+	LP3971_BUCK2_BASE,
+	LP3971_BUCK3_BASE,
+};
+
+#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
+#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
+
+const static int buck_voltage_map[] = {
+	   0,  800,  850,  900,  950, 1000, 1050, 1100,
+	1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
+	1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
+	3000, 3300,
+};
+
+#define BUCK_TARGET_VOL_MASK 0x3f
+#define BUCK_TARGET_VOL_MIN_IDX 0x01
+#define BUCK_TARGET_VOL_MAX_IDX 0x19
+
+#define LP3971_BUCK_RAMP_REG(x)	(buck_base_addr[x]+2)
+
+#define LP3971_LDO_ENABLE_REG 0x12
+#define LP3971_LDO_VOL_CONTR_BASE 0x39
+
+/*	Voltage control registers:
+	LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0
+	LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0
+	LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1
+	LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1
+	LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2
+*/
+#define LP3971_LDO_VOL_CONTR_REG(x)	(LP3971_LDO_VOL_CONTR_BASE + (x >> 1))
+
+/*	Voltage control registers shift:
+	LP3971_LDO1 -> 0, LP3971_LDO2 -> 4
+	LP3971_LDO3 -> 0, LP3971_LDO4 -> 4
+	LP3971_LDO5 -> 0
+*/
+#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
+#define LDO_VOL_CONTR_MASK 0x0f
+
+const static int ldo45_voltage_map[] = {
+	1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
+	1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+};
+
+const static int ldo123_voltage_map[] = {
+	1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
+	2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+};
+
+const static int *ldo_voltage_map[] = {
+	ldo123_voltage_map, /* LDO1 */
+	ldo123_voltage_map, /* LDO2 */
+	ldo123_voltage_map, /* LDO3 */
+	ldo45_voltage_map, /* LDO4 */
+	ldo45_voltage_map, /* LDO5 */
+};
+
+#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
+
+#define LDO_VOL_MIN_IDX 0x00
+#define LDO_VOL_MAX_IDX 0x0f
+
+static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
+{
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
+}
+
+static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 mask = 1 << (1 + ldo);
+	u16 val;
+
+	val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG);
+	return (val & mask) != 0;
+}
+
+static int lp3971_ldo_enable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 mask = 1 << (1 + ldo);
+
+	return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask);
+}
+
+static int lp3971_ldo_disable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 mask = 1 << (1 + ldo);
+
+	return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
+}
+
+static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 val, reg;
+
+	reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
+	val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
+
+	return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
+}
+
+static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
+				  int min_uV, int max_uV)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+	const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
+	u16 val;
+
+	if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
+	    min_vol > vol_map[LDO_VOL_MAX_IDX])
+		return -EINVAL;
+
+	for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
+		if (vol_map[val] >= min_vol)
+			break;
+
+	if (vol_map[val] > max_vol)
+		return -EINVAL;
+
+	return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
+		LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), val);
+}
+
+static struct regulator_ops lp3971_ldo_ops = {
+	.list_voltage = lp3971_ldo_list_voltage,
+	.is_enabled = lp3971_ldo_is_enabled,
+	.enable = lp3971_ldo_enable,
+	.disable = lp3971_ldo_disable,
+	.get_voltage = lp3971_ldo_get_voltage,
+	.set_voltage = lp3971_ldo_set_voltage,
+};
+
+static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
+{
+	return 1000 * buck_voltage_map[index];
+}
+
+static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 mask = 1 << (buck * 2);
+	u16 val;
+
+	val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG);
+	return (val & mask) != 0;
+}
+
+static int lp3971_dcdc_enable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 mask = 1 << (buck * 2);
+
+	return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask);
+}
+
+static int lp3971_dcdc_disable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 mask = 1 << (buck * 2);
+
+	return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
+}
+
+static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 reg;
+	int val;
+
+	reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
+	reg &= BUCK_TARGET_VOL_MASK;
+
+	if (reg <= BUCK_TARGET_VOL_MAX_IDX)
+		val = 1000 * buck_voltage_map[reg];
+	else {
+		val = 0;
+		dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
+	}
+
+	return val;
+}
+
+static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
+				  int min_uV, int max_uV)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+	const int *vol_map = buck_voltage_map;
+	u16 val;
+	int ret;
+
+	if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
+	    min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
+		return -EINVAL;
+
+	for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
+	     val++)
+		if (vol_map[val] >= min_vol)
+			break;
+
+	if (vol_map[val] > max_vol)
+		return -EINVAL;
+
+	ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
+	       BUCK_TARGET_VOL_MASK, val);
+	if (ret)
+		return ret;
+
+	ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
+	       BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
+	       BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck));
+	if (ret)
+		return ret;
+
+	return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
+	       BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
+	       0 << BUCK_VOL_CHANGE_SHIFT(buck));
+}
+
+static struct regulator_ops lp3971_dcdc_ops = {
+	.list_voltage = lp3971_dcdc_list_voltage,
+	.is_enabled = lp3971_dcdc_is_enabled,
+	.enable = lp3971_dcdc_enable,
+	.disable = lp3971_dcdc_disable,
+	.get_voltage = lp3971_dcdc_get_voltage,
+	.set_voltage = lp3971_dcdc_set_voltage,
+};
+
+static struct regulator_desc regulators[] = {
+	{
+		.name = "LDO1",
+		.id = LP3971_LDO1,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO2",
+		.id = LP3971_LDO2,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO3",
+		.id = LP3971_LDO3,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO4",
+		.id = LP3971_LDO4,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO5",
+		.id = LP3971_LDO5,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC1",
+		.id = LP3971_DCDC1,
+		.ops = &lp3971_dcdc_ops,
+		.n_voltages = ARRAY_SIZE(buck_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC2",
+		.id = LP3971_DCDC2,
+		.ops = &lp3971_dcdc_ops,
+		.n_voltages = ARRAY_SIZE(buck_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC3",
+		.id = LP3971_DCDC3,
+		.ops = &lp3971_dcdc_ops,
+		.n_voltages = ARRAY_SIZE(buck_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
+	u16 *dest)
+{
+	int ret;
+
+	if (count != 1)
+		return -EIO;
+	ret = i2c_smbus_read_byte_data(i2c, reg);
+	if (ret < 0 || count != 1)
+		return -EIO;
+
+	*dest = ret;
+	return 0;
+}
+
+static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
+	const u16 *src)
+{
+	int ret;
+
+	if (count != 1)
+		return -EIO;
+	ret = i2c_smbus_write_byte_data(i2c, reg, *src);
+	if (ret >= 0)
+		return 0;
+
+	return ret;
+}
+
+static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
+{
+	u16 val = 0;
+
+	mutex_lock(&lp3971->io_lock);
+
+	lp3971_i2c_read(lp3971->i2c, reg, 1, &val);
+
+	dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
+		(unsigned)val&0xff);
+
+	mutex_unlock(&lp3971->io_lock);
+
+	return val & 0xff;
+}
+
+static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
+{
+	u16 tmp;
+	int ret;
+
+	mutex_lock(&lp3971->io_lock);
+
+	ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp);
+	tmp = (tmp & ~mask) | val;
+	if (ret == 0) {
+		ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp);
+		dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
+			(unsigned)val&0xff);
+	}
+	mutex_unlock(&lp3971->io_lock);
+
+	return ret;
+}
+
+static int setup_regulators(struct lp3971 *lp3971,
+	struct lp3971_platform_data *pdata)
+{
+	int i, err;
+	int num_regulators = pdata->num_regulators;
+	lp3971->num_regulators = num_regulators;
+	lp3971->rdev = kzalloc(sizeof(struct regulator_dev *) * num_regulators,
+		GFP_KERNEL);
+
+	/* Instantiate the regulators */
+	for (i = 0; i < num_regulators; i++) {
+		int id = pdata->regulators[i].id;
+		lp3971->rdev[i] = regulator_register(&regulators[id],
+			lp3971->dev, pdata->regulators[i].initdata, lp3971);
+
+		err = IS_ERR(lp3971->rdev[i]);
+		if (err) {
+			dev_err(lp3971->dev, "regulator init failed: %d\n",
+				err);
+			goto error;
+		}
+	}
+
+	return 0;
+error:
+	for (i = 0; i < num_regulators; i++)
+		if (lp3971->rdev[i])
+			regulator_unregister(lp3971->rdev[i]);
+	kfree(lp3971->rdev);
+	lp3971->rdev = NULL;
+	return err;
+}
+
+static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct lp3971 *lp3971;
+	struct lp3971_platform_data *pdata = i2c->dev.platform_data;
+	int ret;
+	u16 val;
+
+	lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
+	if (lp3971 == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	lp3971->i2c = i2c;
+	lp3971->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, lp3971);
+
+	mutex_init(&lp3971->io_lock);
+
+	/* Detect LP3971 */
+	ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val);
+	if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL)
+		ret = -ENODEV;
+	if (ret < 0) {
+		dev_err(&i2c->dev, "failed to detect device\n");
+		goto err_detect;
+	}
+
+	if (pdata) {
+		ret = setup_regulators(lp3971, pdata);
+		if (ret < 0)
+			goto err_detect;
+	} else
+		dev_warn(lp3971->dev, "No platform init data supplied\n");
+
+	return 0;
+
+err_detect:
+	i2c_set_clientdata(i2c, NULL);
+	kfree(lp3971);
+err:
+	return ret;
+}
+
+static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
+{
+	struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
+	int i;
+	for (i = 0; i < lp3971->num_regulators; i++)
+		if (lp3971->rdev[i])
+			regulator_unregister(lp3971->rdev[i]);
+	kfree(lp3971->rdev);
+	i2c_set_clientdata(i2c, NULL);
+	kfree(lp3971);
+
+	return 0;
+}
+
+static const struct i2c_device_id lp3971_i2c_id[] = {
+       { "lp3971", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
+
+static struct i2c_driver lp3971_i2c_driver = {
+	.driver = {
+		.name = "LP3971",
+		.owner = THIS_MODULE,
+	},
+	.probe    = lp3971_i2c_probe,
+	.remove   = __devexit_p(lp3971_i2c_remove),
+	.id_table = lp3971_i2c_id,
+};
+
+static int __init lp3971_module_init(void)
+{
+	int ret = -ENODEV;
+
+	ret = i2c_add_driver(&lp3971_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register I2C driver: %d\n", ret);
+
+	return ret;
+}
+module_init(lp3971_module_init);
+
+static void __exit lp3971_module_exit(void)
+{
+	i2c_del_driver(&lp3971_i2c_driver);
+}
+module_exit(lp3971_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");
+MODULE_DESCRIPTION("LP3971 PMIC driver");
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
new file mode 100644
index 00000000000..2c082d3ef48
--- /dev/null
+++ b/drivers/regulator/max1586.c
@@ -0,0 +1,282 @@
+/*
+ * max1586.c  --  Voltage and current regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/max1586.h>
+
+#define MAX1586_V3_MAX_VSEL 31
+#define MAX1586_V6_MAX_VSEL 3
+
+#define MAX1586_V3_MIN_UV   700000
+#define MAX1586_V3_MAX_UV  1475000
+
+#define MAX1586_V6_MIN_UV        0
+#define MAX1586_V6_MAX_UV  3000000
+
+#define I2C_V3_SELECT (0 << 5)
+#define I2C_V6_SELECT (1 << 5)
+
+struct max1586_data {
+	struct i2c_client *client;
+
+	/* min/max V3 voltage */
+	unsigned int min_uV;
+	unsigned int max_uV;
+
+	struct regulator_dev *rdev[0];
+};
+
+/*
+ * V3 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V3 to 0.700V + (x & 0x1f) * 0.025V
+ * This voltage can be increased by external resistors
+ * R24 and R25=100kOhm as described in the data sheet.
+ * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
+ */
+static int max1586_v3_calc_voltage(struct max1586_data *max1586,
+	unsigned selector)
+{
+	unsigned range_uV = max1586->max_uV - max1586->min_uV;
+
+	return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
+}
+
+static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+	struct i2c_client *client = max1586->client;
+	unsigned range_uV = max1586->max_uV - max1586->min_uV;
+	unsigned selector;
+	u8 v3_prog;
+
+	if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
+		return -EINVAL;
+	if (min_uV < max1586->min_uV)
+		min_uV = max1586->min_uV;
+
+	selector = ((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL +
+			range_uV - 1) / range_uV;
+	if (max1586_v3_calc_voltage(max1586, selector) > max_uV)
+		return -EINVAL;
+
+	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
+		max1586_v3_calc_voltage(max1586, selector) / 1000);
+
+	v3_prog = I2C_V3_SELECT | (u8) selector;
+	return i2c_smbus_write_byte(client, v3_prog);
+}
+
+static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+	if (selector > MAX1586_V3_MAX_VSEL)
+		return -EINVAL;
+	return max1586_v3_calc_voltage(max1586, selector);
+}
+
+/*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static int max1586_v6_calc_voltage(unsigned selector)
+{
+	static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+	return voltages_uv[selector];
+}
+
+static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+	struct i2c_client *client = rdev_get_drvdata(rdev);
+	unsigned selector;
+	u8 v6_prog;
+
+	if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
+		return -EINVAL;
+	if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
+		return -EINVAL;
+
+	if (min_uV >= 3000000)
+		selector = 3;
+	if (min_uV < 3000000)
+		selector = 2;
+	if (min_uV < 2500000)
+		selector = 1;
+	if (min_uV < 1800000)
+		selector = 0;
+
+	if (max1586_v6_calc_voltage(selector) > max_uV)
+		return -EINVAL;
+
+	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
+		max1586_v6_calc_voltage(selector) / 1000);
+
+	v6_prog = I2C_V6_SELECT | (u8) selector;
+	return i2c_smbus_write_byte(client, v6_prog);
+}
+
+static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
+{
+	if (selector > MAX1586_V6_MAX_VSEL)
+		return -EINVAL;
+	return max1586_v6_calc_voltage(selector);
+}
+
+/*
+ * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
+ * the set up value.
+ */
+static struct regulator_ops max1586_v3_ops = {
+	.set_voltage = max1586_v3_set,
+	.list_voltage = max1586_v3_list,
+};
+
+static struct regulator_ops max1586_v6_ops = {
+	.set_voltage = max1586_v6_set,
+	.list_voltage = max1586_v6_list,
+};
+
+static struct regulator_desc max1586_reg[] = {
+	{
+		.name = "Output_V3",
+		.id = MAX1586_V3,
+		.ops = &max1586_v3_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX1586_V3_MAX_VSEL + 1,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "Output_V6",
+		.id = MAX1586_V6,
+		.ops = &max1586_v6_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX1586_V6_MAX_VSEL + 1,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int max1586_pmic_probe(struct i2c_client *client,
+			      const struct i2c_device_id *i2c_id)
+{
+	struct regulator_dev **rdev;
+	struct max1586_platform_data *pdata = client->dev.platform_data;
+	struct max1586_data *max1586;
+	int i, id, ret = -ENOMEM;
+
+	max1586 = kzalloc(sizeof(struct max1586_data) +
+			sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
+			GFP_KERNEL);
+	if (!max1586)
+		goto out;
+
+	max1586->client = client;
+
+	if (!pdata->v3_gain) {
+		ret = -EINVAL;
+		goto out_unmap;
+	}
+	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
+	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
+
+	rdev = max1586->rdev;
+	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
+		id = pdata->subdevs[i].id;
+		if (!pdata->subdevs[i].platform_data)
+			continue;
+		if (id < MAX1586_V3 || id > MAX1586_V6) {
+			dev_err(&client->dev, "invalid regulator id %d\n", id);
+			goto err;
+		}
+		rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
+					     pdata->subdevs[i].platform_data,
+					     max1586);
+		if (IS_ERR(rdev[i])) {
+			ret = PTR_ERR(rdev[i]);
+			dev_err(&client->dev, "failed to register %s\n",
+				max1586_reg[id].name);
+			goto err;
+		}
+	}
+
+	i2c_set_clientdata(client, rdev);
+	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
+	return 0;
+
+err:
+	while (--i >= 0)
+		regulator_unregister(rdev[i]);
+out_unmap:
+	kfree(max1586);
+out:
+	return ret;
+}
+
+static int max1586_pmic_remove(struct i2c_client *client)
+{
+	struct regulator_dev **rdev = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i <= MAX1586_V6; i++)
+		if (rdev[i])
+			regulator_unregister(rdev[i]);
+	kfree(rdev);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static const struct i2c_device_id max1586_id[] = {
+	{ "max1586", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max1586_id);
+
+static struct i2c_driver max1586_pmic_driver = {
+	.probe = max1586_pmic_probe,
+	.remove = max1586_pmic_remove,
+	.driver		= {
+		.name	= "max1586",
+	},
+	.id_table	= max1586_id,
+};
+
+static int __init max1586_pmic_init(void)
+{
+	return i2c_add_driver(&max1586_pmic_driver);
+}
+subsys_initcall(max1586_pmic_init);
+
+static void __exit max1586_pmic_exit(void)
+{
+	i2c_del_driver(&max1586_pmic_driver);
+}
+module_exit(max1586_pmic_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index cd761d85c8f..8e14900eb68 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -316,7 +316,7 @@ static int __init pcf50633_regulator_init(void)
 {
 	return platform_driver_register(&pcf50633_regulator_driver);
 }
-module_init(pcf50633_regulator_init);
+subsys_initcall(pcf50633_regulator_init);
 
 static void __exit pcf50633_regulator_exit(void)
 {
diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
new file mode 100644
index 00000000000..06d2fa96a8b
--- /dev/null
+++ b/drivers/regulator/userspace-consumer.c
@@ -0,0 +1,200 @@
+/*
+ * userspace-consumer.c
+ *
+ * Copyright 2009 CompuLab, Ltd.
+ *
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based of virtual consumer driver:
+ *   Copyright 2008 Wolfson Microelectronics PLC.
+ *   Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
+
+struct userspace_consumer_data {
+	const char *name;
+
+	struct mutex lock;
+	bool enabled;
+
+	int num_supplies;
+	struct regulator_bulk_data *supplies;
+};
+
+static ssize_t reg_show_name(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct userspace_consumer_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+
+static ssize_t reg_show_state(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct userspace_consumer_data *data = dev_get_drvdata(dev);
+
+	if (data->enabled)
+		return sprintf(buf, "enabled\n");
+
+	return sprintf(buf, "disabled\n");
+}
+
+static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct userspace_consumer_data *data = dev_get_drvdata(dev);
+	bool enabled;
+	int ret;
+
+	/*
+	 * sysfs_streq() doesn't need the \n's, but we add them so the strings
+	 * will be shared with show_state(), above.
+	 */
+	if (sysfs_streq(buf, "enabled\n") || sysfs_streq(buf, "1"))
+		enabled = true;
+	else if (sysfs_streq(buf, "disabled\n") || sysfs_streq(buf, "0"))
+		enabled = false;
+	else {
+		dev_err(dev, "Configuring invalid mode\n");
+		return count;
+	}
+
+	mutex_lock(&data->lock);
+	if (enabled != data->enabled) {
+		if (enabled)
+			ret = regulator_bulk_enable(data->num_supplies,
+						    data->supplies);
+		else
+			ret = regulator_bulk_disable(data->num_supplies,
+						     data->supplies);
+
+		if (ret == 0)
+			data->enabled = enabled;
+		else
+			dev_err(dev, "Failed to configure state: %d\n", ret);
+	}
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(name, 0444, reg_show_name, NULL);
+static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state);
+
+static struct device_attribute *attributes[] = {
+	&dev_attr_name,
+	&dev_attr_state,
+};
+
+static int regulator_userspace_consumer_probe(struct platform_device *pdev)
+{
+	struct regulator_userspace_consumer_data *pdata;
+	struct userspace_consumer_data *drvdata;
+	int ret, i;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -EINVAL;
+
+	drvdata = kzalloc(sizeof(struct userspace_consumer_data), GFP_KERNEL);
+	if (drvdata == NULL)
+		return -ENOMEM;
+
+	drvdata->name = pdata->name;
+	drvdata->num_supplies = pdata->num_supplies;
+	drvdata->supplies = pdata->supplies;
+
+	mutex_init(&drvdata->lock);
+
+	ret = regulator_bulk_get(&pdev->dev, drvdata->num_supplies,
+				 drvdata->supplies);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get supplies: %d\n", ret);
+		goto err_alloc_supplies;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+		ret = device_create_file(&pdev->dev, attributes[i]);
+		if (ret != 0)
+			goto err_create_attrs;
+	}
+
+	if (pdata->init_on)
+		ret = regulator_bulk_enable(drvdata->num_supplies,
+					    drvdata->supplies);
+
+	drvdata->enabled = pdata->init_on;
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret);
+		goto err_create_attrs;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+
+err_create_attrs:
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+
+	regulator_bulk_free(drvdata->num_supplies, drvdata->supplies);
+
+err_alloc_supplies:
+	kfree(drvdata);
+	return ret;
+}
+
+static int regulator_userspace_consumer_remove(struct platform_device *pdev)
+{
+	struct userspace_consumer_data *data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+
+	if (data->enabled)
+		regulator_bulk_disable(data->num_supplies, data->supplies);
+
+	regulator_bulk_free(data->num_supplies, data->supplies);
+	kfree(data);
+
+	return 0;
+}
+
+static struct platform_driver regulator_userspace_consumer_driver = {
+	.probe		= regulator_userspace_consumer_probe,
+	.remove		= regulator_userspace_consumer_remove,
+	.driver		= {
+		.name		= "reg-userspace-consumer",
+	},
+};
+
+
+static int __init regulator_userspace_consumer_init(void)
+{
+	return platform_driver_register(&regulator_userspace_consumer_driver);
+}
+module_init(regulator_userspace_consumer_init);
+
+static void __exit regulator_userspace_consumer_exit(void)
+{
+	platform_driver_unregister(&regulator_userspace_consumer_driver);
+}
+module_exit(regulator_userspace_consumer_exit);
+
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Userspace consumer for voltage and current regulators");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index 71403fa3ffa..e7db5664722 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -347,3 +347,4 @@ module_exit(regulator_virtual_consumer_exit);
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Virtual regulator consumer");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-virt-consumer");
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 771eca1066b..17a00b0fafd 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1570,3 +1570,4 @@ module_exit(wm8350_regulator_exit);
 MODULE_AUTHOR("Liam Girdwood");
 MODULE_DESCRIPTION("WM8350 voltage and current regulator driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-regulator");
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 15742602907..d9a2c988c6e 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -320,7 +320,7 @@ static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 	struct regulator_dev *rdev;
 
 	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
-		pdev->dev.platform_data, pdev->dev.driver_data);
+		pdev->dev.platform_data, dev_get_drvdata(&pdev->dev));
 
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
@@ -359,7 +359,7 @@ static struct platform_driver wm8400_regulator_driver = {
 int wm8400_register_regulator(struct device *dev, int reg,
 			      struct regulator_init_data *initdata)
 {
-	struct wm8400 *wm8400 = dev->driver_data;
+	struct wm8400 *wm8400 = dev_get_drvdata(dev);
 
 	if (wm8400->regulators[reg].name)
 		return -EBUSY;
@@ -369,8 +369,8 @@ int wm8400_register_regulator(struct device *dev, int reg,
 	wm8400->regulators[reg].name = "wm8400-regulator";
 	wm8400->regulators[reg].id = reg;
 	wm8400->regulators[reg].dev.parent = dev;
-	wm8400->regulators[reg].dev.driver_data = wm8400;
 	wm8400->regulators[reg].dev.platform_data = initdata;
+	dev_set_drvdata(&wm8400->regulators[reg].dev, wm8400);
 
 	return platform_device_register(&wm8400->regulators[reg]);
 }
@@ -380,7 +380,7 @@ static int __init wm8400_regulator_init(void)
 {
 	return platform_driver_register(&wm8400_regulator_driver);
 }
-module_init(wm8400_regulator_init);
+subsys_initcall(wm8400_regulator_init);
 
 static void __exit wm8400_regulator_exit(void)
 {
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283dd02..551332e4ed0 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA			0x000
+#define EP93XX_RTC_MATCH		0x004
+#define EP93XX_RTC_STATUS		0x008
+#define  EP93XX_RTC_STATUS_INTR		 (1<<0)
+#define EP93XX_RTC_LOAD			0x00C
+#define EP93XX_RTC_CONTROL		0x010
+#define  EP93XX_RTC_CONTROL_MIE		 (1<<0)
+#define EP93XX_RTC_SWCOMP		0x108
+#define  EP93XX_RTC_SWCOMP_DEL_MASK	 0x001f0000
+#define  EP93XX_RTC_SWCOMP_DEL_SHIFT	 16
+#define  EP93XX_RTC_SWCOMP_INT_MASK	 0x0000ffff
+#define  EP93XX_RTC_SWCOMP_INT_SHIFT	 0
+
+#define DRV_VERSION "0.3"
 
-#define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD		EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP	EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+	void __iomem	*mmio_base;
+};
 
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
 				unsigned short *delete)
 {
-	unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long comp;
+
+	comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
 
 	if (preload)
-		*preload = comp & 0xffff;
+		*preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+				>> EP93XX_RTC_SWCOMP_INT_SHIFT;
 
 	if (delete)
-		*delete = (comp >> 16) & 0x1f;
+		*delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+				>> EP93XX_RTC_SWCOMP_DEL_SHIFT;
 
 	return 0;
 }
 
 static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long time;
+
+	 time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
 
 	rtc_time_to_tm(time, tm);
 	return 0;
@@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
 {
-	__raw_writel(secs + 1, EP93XX_RTC_LOAD);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+	__raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
 	return 0;
 }
 
@@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	unsigned short preload, delete;
 
-	ep93xx_get_swcomp(dev, &preload, &delete);
+	ep93xx_rtc_get_swcomp(dev, &preload, &delete);
 
 	seq_printf(seq, "preload\t\t: %d\n", preload);
 	seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = {
 	.proc		= ep93xx_rtc_proc,
 };
 
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short preload;
 
-	ep93xx_get_swcomp(dev, &preload, NULL);
+	ep93xx_rtc_get_swcomp(dev, &preload, NULL);
 
 	return sprintf(buf, "%d\n", preload);
 }
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
 
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short delete;
 
-	ep93xx_get_swcomp(dev, NULL, &delete);
+	ep93xx_rtc_get_swcomp(dev, NULL, &delete);
 
 	return sprintf(buf, "%d\n", delete);
 }
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
 
 
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = rtc_device_register("ep93xx",
-				&dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+	struct ep93xx_rtc *ep93xx_rtc;
+	struct resource *res;
+	struct rtc_device *rtc;
+	int err;
+
+	ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+	if (ep93xx_rtc == NULL)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+	if (ep93xx_rtc->mmio_base == NULL) {
+		err = -ENXIO;
+		goto fail;
+	}
 
+	pdev->dev.platform_data = ep93xx_rtc;
+
+	rtc = rtc_device_register(pdev->name,
+				&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		return PTR_ERR(rtc);
+		err = PTR_ERR(rtc);
+		goto fail;
 	}
 
-	platform_set_drvdata(dev, rtc);
+	platform_set_drvdata(pdev, rtc);
 
-	device_create_file(&dev->dev, &dev_attr_comp_preload);
-	device_create_file(&dev->dev, &dev_attr_comp_delete);
+	err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+	if (err)
+		goto fail;
+	err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+	if (err) {
+		device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+		goto fail;
+	}
 
 	return 0;
+
+fail:
+	if (ep93xx_rtc->mmio_base) {
+		iounmap(ep93xx_rtc->mmio_base);
+		pdev->dev.platform_data = NULL;
+	}
+	release_mem_region(res->start, resource_size(res));
+	return err;
 }
 
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = platform_get_drvdata(dev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+	struct resource *res;
+
+	/* cleanup sysfs */
+	device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+	device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+	rtc_device_unregister(rtc);
+
+	iounmap(ep93xx_rtc->mmio_base);
+	pdev->dev.platform_data = NULL;
 
- 	if (rtc)
-		rtc_device_unregister(rtc);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(dev, NULL);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ep93xx-rtc");
 
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
 	.driver		= {
 		.name	= "ep93xx-rtc",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= ep93xx_rtc_probe,
-	.remove		= __devexit_p(ep93xx_rtc_remove),
+	.remove		= __exit_p(ep93xx_rtc_remove),
 };
 
 static int __init ep93xx_rtc_init(void)
 {
-	return platform_driver_register(&ep93xx_rtc_platform_driver);
+        return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
 }
 
 static void __exit ep93xx_rtc_exit(void)
 {
-	platform_driver_unregister(&ep93xx_rtc_platform_driver);
+	platform_driver_unregister(&ep93xx_rtc_driver);
 }
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index aaf1f75fa29..457231bb102 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -117,7 +117,7 @@ static int pl030_probe(struct amba_device *dev, struct amba_id *id)
 		goto err_rtc;
 	}
 
-	rtc->base = ioremap(dev->res.start, SZ_4K);
+	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!rtc->base) {
 		ret = -ENOMEM;
 		goto err_map;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 451fc13784d..f41873f98f6 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -142,8 +142,7 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 		goto out;
 	}
 
-	ldata->base = ioremap(adev->res.start,
-			      adev->res.end - adev->res.start + 1);
+	ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!ldata->base) {
 		ret = -ENOMEM;
 		goto out_no_remap;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 27a1be0cd4d..e5b84db0aa0 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -5,8 +5,7 @@
  *		    Carsten Otte <Cotte@de.ibm.com>
  *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
- *
+ * Copyright IBM Corp. 1999, 2009
  */
 
 #define KMSG_COMPONENT "dasd"
@@ -61,6 +60,7 @@ static int dasd_flush_block_queue(struct dasd_block *);
 static void dasd_device_tasklet(struct dasd_device *);
 static void dasd_block_tasklet(struct dasd_block *);
 static void do_kick_device(struct work_struct *);
+static void do_restore_device(struct work_struct *);
 static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *);
 static void dasd_device_timeout(unsigned long);
 static void dasd_block_timeout(unsigned long);
@@ -109,6 +109,7 @@ struct dasd_device *dasd_alloc_device(void)
 	device->timer.function = dasd_device_timeout;
 	device->timer.data = (unsigned long) device;
 	INIT_WORK(&device->kick_work, do_kick_device);
+	INIT_WORK(&device->restore_device, do_restore_device);
 	device->state = DASD_STATE_NEW;
 	device->target = DASD_STATE_NEW;
 
@@ -512,6 +513,25 @@ void dasd_kick_device(struct dasd_device *device)
 }
 
 /*
+ * dasd_restore_device will schedule a call do do_restore_device to the kernel
+ * event daemon.
+ */
+static void do_restore_device(struct work_struct *work)
+{
+	struct dasd_device *device = container_of(work, struct dasd_device,
+						  restore_device);
+	device->cdev->drv->restore(device->cdev);
+	dasd_put_device(device);
+}
+
+void dasd_restore_device(struct dasd_device *device)
+{
+	dasd_get_device(device);
+	/* queue call to dasd_restore_device to the kernel event daemon. */
+	schedule_work(&device->restore_device);
+}
+
+/*
  * Set the target state for a device and starts the state change.
  */
 void dasd_set_target_state(struct dasd_device *device, int target)
@@ -851,8 +871,10 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 
 	/* Check the cqr */
 	rc = dasd_check_cqr(cqr);
-	if (rc)
+	if (rc) {
+		cqr->intrc = rc;
 		return rc;
+	}
 	device = (struct dasd_device *) cqr->startdev;
 	if (cqr->retries < 0) {
 		/* internal error 14 - start_IO run out of retries */
@@ -906,6 +928,12 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
 			      "start_IO: -EIO device gone, retry");
 		break;
+	case -EINVAL:
+		/* most likely caused in power management context */
+		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+			      "start_IO: -EINVAL device currently "
+			      "not accessible");
+		break;
 	default:
 		/* internal error 11 - unknown rc */
 		snprintf(errorstring, ERRORLENGTH, "11 %d", rc);
@@ -915,6 +943,7 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 		BUG();
 		break;
 	}
+	cqr->intrc = rc;
 	return rc;
 }
 
@@ -1454,8 +1483,12 @@ int dasd_sleep_on(struct dasd_ccw_req *cqr)
 	dasd_add_request_tail(cqr);
 	wait_event(generic_waitq, _wait_for_wakeup(cqr));
 
-	/* Request status is either done or failed. */
-	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+	if (cqr->status == DASD_CQR_DONE)
+		rc = 0;
+	else if (cqr->intrc)
+		rc = cqr->intrc;
+	else
+		rc = -EIO;
 	return rc;
 }
 
@@ -1477,8 +1510,15 @@ int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
 		dasd_cancel_req(cqr);
 		/* wait (non-interruptible) for final status */
 		wait_event(generic_waitq, _wait_for_wakeup(cqr));
+		cqr->intrc = rc;
 	}
-	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+
+	if (cqr->status == DASD_CQR_DONE)
+		rc = 0;
+	else if (cqr->intrc)
+		rc = cqr->intrc;
+	else
+		rc = -EIO;
 	return rc;
 }
 
@@ -1523,8 +1563,12 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
 
 	wait_event(generic_waitq, _wait_for_wakeup(cqr));
 
-	/* Request status is either done or failed. */
-	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+	if (cqr->status == DASD_CQR_DONE)
+		rc = 0;
+	else if (cqr->intrc)
+		rc = cqr->intrc;
+	else
+		rc = -EIO;
 	return rc;
 }
 
@@ -2382,6 +2426,12 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 	case CIO_OPER:
 		/* FIXME: add a sanity check. */
 		device->stopped &= ~DASD_STOPPED_DC_WAIT;
+		if (device->stopped & DASD_UNRESUMED_PM) {
+			device->stopped &= ~DASD_UNRESUMED_PM;
+			dasd_restore_device(device);
+			ret = 1;
+			break;
+		}
 		dasd_schedule_device_bh(device);
 		if (device->block)
 			dasd_schedule_block_bh(device->block);
@@ -2392,6 +2442,79 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 	return ret;
 }
 
+int dasd_generic_pm_freeze(struct ccw_device *cdev)
+{
+	struct dasd_ccw_req *cqr, *n;
+	int rc;
+	struct list_head freeze_queue;
+	struct dasd_device *device = dasd_device_from_cdev(cdev);
+
+	if (IS_ERR(device))
+		return PTR_ERR(device);
+	/* disallow new I/O  */
+	device->stopped |= DASD_STOPPED_PM;
+	/* clear active requests */
+	INIT_LIST_HEAD(&freeze_queue);
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	rc = 0;
+	list_for_each_entry_safe(cqr, n, &device->ccw_queue, devlist) {
+		/* Check status and move request to flush_queue */
+		if (cqr->status == DASD_CQR_IN_IO) {
+			rc = device->discipline->term_IO(cqr);
+			if (rc) {
+				/* unable to terminate requeust */
+				dev_err(&device->cdev->dev,
+					"Unable to terminate request %p "
+					"on suspend\n", cqr);
+				spin_unlock_irq(get_ccwdev_lock(cdev));
+				dasd_put_device(device);
+				return rc;
+			}
+		}
+		list_move_tail(&cqr->devlist, &freeze_queue);
+	}
+
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
+	list_for_each_entry_safe(cqr, n, &freeze_queue, devlist) {
+		wait_event(dasd_flush_wq,
+			   (cqr->status != DASD_CQR_CLEAR_PENDING));
+		if (cqr->status == DASD_CQR_CLEARED)
+			cqr->status = DASD_CQR_QUEUED;
+	}
+	/* move freeze_queue to start of the ccw_queue */
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	list_splice_tail(&freeze_queue, &device->ccw_queue);
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
+	if (device->discipline->freeze)
+		rc = device->discipline->freeze(device);
+
+	dasd_put_device(device);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_pm_freeze);
+
+int dasd_generic_restore_device(struct ccw_device *cdev)
+{
+	struct dasd_device *device = dasd_device_from_cdev(cdev);
+	int rc = 0;
+
+	if (IS_ERR(device))
+		return PTR_ERR(device);
+
+	dasd_schedule_device_bh(device);
+	if (device->block)
+		dasd_schedule_block_bh(device->block);
+
+	if (device->discipline->restore)
+		rc = device->discipline->restore(device);
+
+	dasd_put_device(device);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_restore_device);
+
 static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
 						   void *rdc_buffer,
 						   int rdc_buffer_size,
@@ -2427,12 +2550,12 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
 
 
 int dasd_generic_read_dev_chars(struct dasd_device *device, char *magic,
-				void **rdc_buffer, int rdc_buffer_size)
+				void *rdc_buffer, int rdc_buffer_size)
 {
 	int ret;
 	struct dasd_ccw_req *cqr;
 
-	cqr = dasd_generic_build_rdc(device, *rdc_buffer, rdc_buffer_size,
+	cqr = dasd_generic_build_rdc(device, rdc_buffer, rdc_buffer_size,
 				     magic);
 	if (IS_ERR(cqr))
 		return PTR_ERR(cqr);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index e77666c8e6c..4cac5b54f26 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1098,6 +1098,7 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
 	spin_unlock(&dasd_devmap_lock);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dasd_get_uid);
 
 /*
  * Register the given device unique identifier into devmap struct.
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 2efaddfae56..644086ba2ed 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -202,6 +202,7 @@ dasd_start_diag(struct dasd_ccw_req * cqr)
 		rc = -EIO;
 		break;
 	}
+	cqr->intrc = rc;
 	return rc;
 }
 
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index a41c94053e6..1c28ec3e4cc 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -5,10 +5,9 @@
  *		    Carsten Otte <Cotte@de.ibm.com>
  *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ * Copyright IBM Corp. 1999, 2009
  * EMC Symmetrix ioctl Copyright EMC Corporation, 2008
  * Author.........: Nigel Hislop <hislop_nigel@emc.com>
- *
  */
 
 #define KMSG_COMPONENT "dasd"
@@ -104,17 +103,6 @@ dasd_eckd_set_online(struct ccw_device *cdev)
 	return dasd_generic_set_online(cdev, &dasd_eckd_discipline);
 }
 
-static struct ccw_driver dasd_eckd_driver = {
-	.name        = "dasd-eckd",
-	.owner       = THIS_MODULE,
-	.ids         = dasd_eckd_ids,
-	.probe       = dasd_eckd_probe,
-	.remove      = dasd_generic_remove,
-	.set_offline = dasd_generic_set_offline,
-	.set_online  = dasd_eckd_set_online,
-	.notify      = dasd_generic_notify,
-};
-
 static const int sizes_trk0[] = { 28, 148, 84 };
 #define LABEL_SIZE 140
 
@@ -1097,20 +1085,20 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private;
 	struct dasd_block *block;
-	void *rdc_data;
 	int is_known, rc;
 
 	private = (struct dasd_eckd_private *) device->private;
-	if (private == NULL) {
-		private = kzalloc(sizeof(struct dasd_eckd_private),
-				  GFP_KERNEL | GFP_DMA);
-		if (private == NULL) {
+	if (!private) {
+		private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
+		if (!private) {
 			dev_warn(&device->cdev->dev,
 				 "Allocating memory for private DASD data "
 				 "failed\n");
 			return -ENOMEM;
 		}
 		device->private = (void *) private;
+	} else {
+		memset(private, 0, sizeof(*private));
 	}
 	/* Invalidate status of initial analysis. */
 	private->init_cqr_status = -1;
@@ -1161,9 +1149,8 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 		goto out_err3;
 
 	/* Read Device Characteristics */
-	rdc_data = (void *) &(private->rdc_data);
-	memset(rdc_data, 0, sizeof(rdc_data));
-	rc = dasd_generic_read_dev_chars(device, "ECKD", &rdc_data, 64);
+	rc = dasd_generic_read_dev_chars(device, "ECKD", &private->rdc_data,
+					 64);
 	if (rc) {
 		DBF_EVENT(DBF_WARNING,
 			  "Read device characteristics failed, rc=%d for "
@@ -1183,7 +1170,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 		 private->rdc_data.dev_model,
 		 private->rdc_data.cu_type,
 		 private->rdc_data.cu_model.model,
-		    private->real_cyl,
+		 private->real_cyl,
 		 private->rdc_data.trk_per_cyl,
 		 private->rdc_data.sec_per_trk);
 	return 0;
@@ -2336,9 +2323,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 {
 	int tpm, cmdrtd, cmdwtd;
 	int use_prefix;
-
-	struct dasd_eckd_private *private;
+#if defined(CONFIG_64BIT)
 	int fcx_in_css, fcx_in_gneq, fcx_in_features;
+#endif
+	struct dasd_eckd_private *private;
 	struct dasd_device *basedev;
 	sector_t first_rec, last_rec;
 	sector_t first_trk, last_trk;
@@ -2361,11 +2349,15 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	last_offs = sector_div(last_trk, blk_per_trk);
 	cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk);
 
-	/* is transport mode supported ? */
+	/* is transport mode supported? */
+#if defined(CONFIG_64BIT)
 	fcx_in_css = css_general_characteristics.fcx;
 	fcx_in_gneq = private->gneq->reserved2[7] & 0x04;
 	fcx_in_features = private->features.feature[40] & 0x80;
 	tpm = fcx_in_css && fcx_in_gneq && fcx_in_features;
+#else
+	tpm = 0;
+#endif
 
 	/* is read track data and write track data in command mode supported? */
 	cmdrtd = private->features.feature[9] & 0x20;
@@ -3013,8 +3005,9 @@ static void dasd_eckd_dump_sense_ccw(struct dasd_device *device,
 		      " I/O status report for device %s:\n",
 		      dev_name(&device->cdev->dev));
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
-		       " in req: %p CS: 0x%02X DS: 0x%02X\n", req,
-		       scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw));
+		       " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n",
+		       req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
+		       scsw_cc(&irb->scsw), req->intrc);
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 		       " device %s: Failing CCW: %p\n",
 		       dev_name(&device->cdev->dev),
@@ -3115,9 +3108,10 @@ static void dasd_eckd_dump_sense_tcw(struct dasd_device *device,
 		      " I/O status report for device %s:\n",
 		      dev_name(&device->cdev->dev));
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
-		       " in req: %p CS: 0x%02X DS: 0x%02X "
+		       " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d "
 		       "fcxs: 0x%02X schxs: 0x%02X\n", req,
 		       scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
+		       scsw_cc(&irb->scsw), req->intrc,
 		       irb->scsw.tm.fcxs, irb->scsw.tm.schxs);
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 		       " device %s: Failing TCW: %p\n",
@@ -3230,6 +3224,98 @@ static void dasd_eckd_dump_sense(struct dasd_device *device,
 		dasd_eckd_dump_sense_ccw(device, req, irb);
 }
 
+int dasd_eckd_pm_freeze(struct dasd_device *device)
+{
+	/*
+	 * the device should be disconnected from our LCU structure
+	 * on restore we will reconnect it and reread LCU specific
+	 * information like PAV support that might have changed
+	 */
+	dasd_alias_remove_device(device);
+	dasd_alias_disconnect_device_from_lcu(device);
+
+	return 0;
+}
+
+int dasd_eckd_restore_device(struct dasd_device *device)
+{
+	struct dasd_eckd_private *private;
+	int is_known, rc;
+	struct dasd_uid temp_uid;
+
+	/* allow new IO again */
+	device->stopped &= ~DASD_STOPPED_PM;
+
+	private = (struct dasd_eckd_private *) device->private;
+
+	/* Read Configuration Data */
+	rc = dasd_eckd_read_conf(device);
+	if (rc)
+		goto out_err;
+
+	/* Generate device unique id and register in devmap */
+	rc = dasd_eckd_generate_uid(device, &private->uid);
+	dasd_get_uid(device->cdev, &temp_uid);
+	if (memcmp(&private->uid, &temp_uid, sizeof(struct dasd_uid)) != 0)
+		dev_err(&device->cdev->dev, "The UID of the DASD has changed\n");
+	if (rc)
+		goto out_err;
+	dasd_set_uid(device->cdev, &private->uid);
+
+	/* register lcu with alias handling, enable PAV if this is a new lcu */
+	is_known = dasd_alias_make_device_known_to_lcu(device);
+	if (is_known < 0)
+		return is_known;
+	if (!is_known) {
+		/* new lcu found */
+		rc = dasd_eckd_validate_server(device); /* will switch pav on */
+		if (rc)
+			goto out_err;
+	}
+
+	/* Read Feature Codes */
+	rc = dasd_eckd_read_features(device);
+	if (rc)
+		goto out_err;
+
+	/* Read Device Characteristics */
+	memset(&private->rdc_data, 0, sizeof(private->rdc_data));
+	rc = dasd_generic_read_dev_chars(device, "ECKD",
+					 &private->rdc_data, 64);
+	if (rc) {
+		DBF_EVENT(DBF_WARNING,
+			  "Read device characteristics failed, rc=%d for "
+			  "device: %s", rc, dev_name(&device->cdev->dev));
+		goto out_err;
+	}
+
+	/* add device to alias management */
+	dasd_alias_add_device(device);
+
+	return 0;
+
+out_err:
+	/*
+	 * if the resume failed for the DASD we put it in
+	 * an UNRESUMED stop state
+	 */
+	device->stopped |= DASD_UNRESUMED_PM;
+	return 0;
+}
+
+static struct ccw_driver dasd_eckd_driver = {
+	.name	     = "dasd-eckd",
+	.owner	     = THIS_MODULE,
+	.ids	     = dasd_eckd_ids,
+	.probe	     = dasd_eckd_probe,
+	.remove      = dasd_generic_remove,
+	.set_offline = dasd_generic_set_offline,
+	.set_online  = dasd_eckd_set_online,
+	.notify      = dasd_generic_notify,
+	.freeze      = dasd_generic_pm_freeze,
+	.thaw	     = dasd_generic_restore_device,
+	.restore     = dasd_generic_restore_device,
+};
 
 /*
  * max_blocks is dependent on the amount of storage that is available
@@ -3268,13 +3354,21 @@ static struct dasd_discipline dasd_eckd_discipline = {
 	.dump_sense_dbf = dasd_eckd_dump_sense_dbf,
 	.fill_info = dasd_eckd_fill_info,
 	.ioctl = dasd_eckd_ioctl,
+	.freeze = dasd_eckd_pm_freeze,
+	.restore = dasd_eckd_restore_device,
 };
 
 static int __init
 dasd_eckd_init(void)
 {
+	int ret;
+
 	ASCEBC(dasd_eckd_discipline.ebcname, 4);
-	return ccw_driver_register(&dasd_eckd_driver);
+	ret = ccw_driver_register(&dasd_eckd_driver);
+	if (!ret)
+		wait_for_device_probe();
+
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 8912358daa2..e21ee735f92 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -2,8 +2,7 @@
  * File...........: linux/drivers/s390/block/dasd_fba.c
  * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
+ * Copyright IBM Corp. 1999, 2009
  */
 
 #define KMSG_COMPONENT "dasd"
@@ -75,6 +74,9 @@ static struct ccw_driver dasd_fba_driver = {
 	.set_offline = dasd_generic_set_offline,
 	.set_online  = dasd_fba_set_online,
 	.notify      = dasd_generic_notify,
+	.freeze      = dasd_generic_pm_freeze,
+	.thaw	     = dasd_generic_restore_device,
+	.restore     = dasd_generic_restore_device,
 };
 
 static void
@@ -122,20 +124,20 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	struct dasd_block *block;
 	struct dasd_fba_private *private;
 	struct ccw_device *cdev = device->cdev;
-	void *rdc_data;
 	int rc;
 
 	private = (struct dasd_fba_private *) device->private;
-	if (private == NULL) {
-		private = kzalloc(sizeof(struct dasd_fba_private),
-				  GFP_KERNEL | GFP_DMA);
-		if (private == NULL) {
+	if (!private) {
+		private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
+		if (!private) {
 			dev_warn(&device->cdev->dev,
 				 "Allocating memory for private DASD "
 				 "data failed\n");
 			return -ENOMEM;
 		}
 		device->private = (void *) private;
+	} else {
+		memset(private, 0, sizeof(*private));
 	}
 	block = dasd_alloc_block();
 	if (IS_ERR(block)) {
@@ -150,8 +152,8 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	block->base = device;
 
 	/* Read Device Characteristics */
-	rdc_data = (void *) &(private->rdc_data);
-	rc = dasd_generic_read_dev_chars(device, "FBA ", &rdc_data, 32);
+	rc = dasd_generic_read_dev_chars(device, "FBA ", &private->rdc_data,
+					 32);
 	if (rc) {
 		DBF_EVENT(DBF_WARNING, "Read device characteristics returned "
 			  "error %d for device: %s",
@@ -604,8 +606,14 @@ static struct dasd_discipline dasd_fba_discipline = {
 static int __init
 dasd_fba_init(void)
 {
+	int ret;
+
 	ASCEBC(dasd_fba_discipline.ebcname, 4);
-	return ccw_driver_register(&dasd_fba_driver);
+	ret = ccw_driver_register(&dasd_fba_driver);
+	if (!ret)
+		wait_for_device_probe();
+
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index c1e487f774c..fd63b2f2bda 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -4,8 +4,7 @@
  *		    Horst Hummel <Horst.Hummel@de.ibm.com>
  *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
+ * Copyright IBM Corp. 1999, 2009
  */
 
 #ifndef DASD_INT_H
@@ -173,6 +172,7 @@ struct dasd_ccw_req {
 	void *data;			/* pointer to data area */
 
 	/* these are important for recovering erroneous requests          */
+	int intrc;			/* internal error, e.g. from start_IO */
 	struct irb irb;			/* device status in case of an error */
 	struct dasd_ccw_req *refers;	/* ERP-chain queueing. */
 	void *function; 		/* originating ERP action */
@@ -294,6 +294,10 @@ struct dasd_discipline {
 	int (*fill_geometry) (struct dasd_block *, struct hd_geometry *);
 	int (*fill_info) (struct dasd_device *, struct dasd_information2_t *);
 	int (*ioctl) (struct dasd_block *, unsigned int, void __user *);
+
+	/* suspend/resume functions */
+	int (*freeze) (struct dasd_device *);
+	int (*restore) (struct dasd_device *);
 };
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
@@ -366,6 +370,7 @@ struct dasd_device {
 	atomic_t tasklet_scheduled;
         struct tasklet_struct tasklet;
 	struct work_struct kick_work;
+	struct work_struct restore_device;
 	struct timer_list timer;
 
 	debug_info_t *debug_area;
@@ -409,6 +414,8 @@ struct dasd_block {
 #define DASD_STOPPED_PENDING 4         /* long busy */
 #define DASD_STOPPED_DC_WAIT 8         /* disconnected, wait */
 #define DASD_STOPPED_SU      16        /* summary unit check handling */
+#define DASD_STOPPED_PM      32        /* pm state transition */
+#define DASD_UNRESUMED_PM    64        /* pm resume failed state */
 
 /* per device flags */
 #define DASD_FLAG_OFFLINE	3	/* device is in offline processing */
@@ -555,6 +562,7 @@ void dasd_free_block(struct dasd_block *);
 void dasd_enable_device(struct dasd_device *);
 void dasd_set_target_state(struct dasd_device *, int);
 void dasd_kick_device(struct dasd_device *);
+void dasd_restore_device(struct dasd_device *);
 
 void dasd_add_request_head(struct dasd_ccw_req *);
 void dasd_add_request_tail(struct dasd_ccw_req *);
@@ -577,8 +585,10 @@ int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *);
 int dasd_generic_set_offline (struct ccw_device *cdev);
 int dasd_generic_notify(struct ccw_device *, int);
 void dasd_generic_handle_state_change(struct dasd_device *);
+int dasd_generic_pm_freeze(struct ccw_device *);
+int dasd_generic_restore_device(struct ccw_device *);
 
-int dasd_generic_read_dev_chars(struct dasd_device *, char *, void **, int);
+int dasd_generic_read_dev_chars(struct dasd_device *, char *, void *, int);
 char *dasd_get_sense(struct irb *);
 
 /* externals in dasd_devmap.c */
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index a4c7ffcd998..016f9e9d259 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -14,10 +14,11 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
-#include <asm/extmem.h>
-#include <asm/io.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/extmem.h>
+#include <asm/io.h>
 
 #define DCSSBLK_NAME "dcssblk"
 #define DCSSBLK_MINORS_PER_DISK 1
@@ -127,7 +128,7 @@ dcssblk_assign_free_minor(struct dcssblk_dev_info *dev_info)
 		found = 0;
 		// test if minor available
 		list_for_each_entry(entry, &dcssblk_devices, lh)
-			if (minor == MINOR(disk_devt(entry->gd)))
+			if (minor == entry->gd->first_minor)
 				found++;
 		if (!found) break; // got unused minor
 	}
@@ -625,7 +626,7 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	if (rc)
 		goto release_gd;
 	sprintf(dev_info->gd->disk_name, "dcssblk%d",
-		MINOR(disk_devt(dev_info->gd)));
+		dev_info->gd->first_minor);
 	list_add_tail(&dev_info->lh, &dcssblk_devices);
 
 	if (!try_module_get(THIS_MODULE)) {
@@ -940,11 +941,94 @@ dcssblk_check_params(void)
 }
 
 /*
+ * Suspend / Resume
+ */
+static int dcssblk_freeze(struct device *dev)
+{
+	struct dcssblk_dev_info *dev_info;
+	int rc = 0;
+
+	list_for_each_entry(dev_info, &dcssblk_devices, lh) {
+		switch (dev_info->segment_type) {
+			case SEG_TYPE_SR:
+			case SEG_TYPE_ER:
+			case SEG_TYPE_SC:
+				if (!dev_info->is_shared)
+					rc = -EINVAL;
+				break;
+			default:
+				rc = -EINVAL;
+				break;
+		}
+		if (rc)
+			break;
+	}
+	if (rc)
+		pr_err("Suspend failed because device %s is writeable.\n",
+		       dev_info->segment_name);
+	return rc;
+}
+
+static int dcssblk_restore(struct device *dev)
+{
+	struct dcssblk_dev_info *dev_info;
+	struct segment_info *entry;
+	unsigned long start, end;
+	int rc = 0;
+
+	list_for_each_entry(dev_info, &dcssblk_devices, lh) {
+		list_for_each_entry(entry, &dev_info->seg_list, lh) {
+			segment_unload(entry->segment_name);
+			rc = segment_load(entry->segment_name, SEGMENT_SHARED,
+					  &start, &end);
+			if (rc < 0) {
+// TODO in_use check ?
+				segment_warning(rc, entry->segment_name);
+				goto out_panic;
+			}
+			if (start != entry->start || end != entry->end) {
+				pr_err("Mismatch of start / end address after "
+				       "resuming device %s\n",
+				       entry->segment_name);
+				goto out_panic;
+			}
+		}
+	}
+	return 0;
+out_panic:
+	panic("fatal dcssblk resume error\n");
+}
+
+static int dcssblk_thaw(struct device *dev)
+{
+	return 0;
+}
+
+static struct dev_pm_ops dcssblk_pm_ops = {
+	.freeze		= dcssblk_freeze,
+	.thaw		= dcssblk_thaw,
+	.restore	= dcssblk_restore,
+};
+
+static struct platform_driver dcssblk_pdrv = {
+	.driver = {
+		.name	= "dcssblk",
+		.owner	= THIS_MODULE,
+		.pm	= &dcssblk_pm_ops,
+	},
+};
+
+static struct platform_device *dcssblk_pdev;
+
+
+/*
  * The init/exit functions.
  */
 static void __exit
 dcssblk_exit(void)
 {
+	platform_device_unregister(dcssblk_pdev);
+	platform_driver_unregister(&dcssblk_pdrv);
 	root_device_unregister(dcssblk_root_dev);
 	unregister_blkdev(dcssblk_major, DCSSBLK_NAME);
 }
@@ -954,30 +1038,44 @@ dcssblk_init(void)
 {
 	int rc;
 
-	dcssblk_root_dev = root_device_register("dcssblk");
-	if (IS_ERR(dcssblk_root_dev))
-		return PTR_ERR(dcssblk_root_dev);
-	rc = device_create_file(dcssblk_root_dev, &dev_attr_add);
-	if (rc) {
-		root_device_unregister(dcssblk_root_dev);
+	rc = platform_driver_register(&dcssblk_pdrv);
+	if (rc)
 		return rc;
+
+	dcssblk_pdev = platform_device_register_simple("dcssblk", -1, NULL,
+							0);
+	if (IS_ERR(dcssblk_pdev)) {
+		rc = PTR_ERR(dcssblk_pdev);
+		goto out_pdrv;
 	}
-	rc = device_create_file(dcssblk_root_dev, &dev_attr_remove);
-	if (rc) {
-		root_device_unregister(dcssblk_root_dev);
-		return rc;
+
+	dcssblk_root_dev = root_device_register("dcssblk");
+	if (IS_ERR(dcssblk_root_dev)) {
+		rc = PTR_ERR(dcssblk_root_dev);
+		goto out_pdev;
 	}
+	rc = device_create_file(dcssblk_root_dev, &dev_attr_add);
+	if (rc)
+		goto out_root;
+	rc = device_create_file(dcssblk_root_dev, &dev_attr_remove);
+	if (rc)
+		goto out_root;
 	rc = register_blkdev(0, DCSSBLK_NAME);
-	if (rc < 0) {
-		root_device_unregister(dcssblk_root_dev);
-		return rc;
-	}
+	if (rc < 0)
+		goto out_root;
 	dcssblk_major = rc;
 	init_rwsem(&dcssblk_devices_sem);
 
 	dcssblk_check_params();
-
 	return 0;
+
+out_root:
+	root_device_unregister(dcssblk_root_dev);
+out_pdev:
+	platform_device_unregister(dcssblk_pdev);
+out_pdrv:
+	platform_driver_unregister(&dcssblk_pdrv);
+	return rc;
 }
 
 module_init(dcssblk_init);
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 0ae0c83ef87..2e9e1ecd6d8 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -39,7 +39,10 @@
 #include <linux/hdreg.h>  /* HDIO_GETGEO */
 #include <linux/sysdev.h>
 #include <linux/bio.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
 #include <asm/uaccess.h>
+#include <asm/checksum.h>
 
 #define XPRAM_NAME	"xpram"
 #define XPRAM_DEVS	1	/* one partition */
@@ -48,6 +51,7 @@
 typedef struct {
 	unsigned int	size;		/* size of xpram segment in pages */
 	unsigned int	offset;		/* start page of xpram segment */
+	unsigned int	csum;		/* partition checksum for suspend */
 } xpram_device_t;
 
 static xpram_device_t xpram_devices[XPRAM_MAX_DEVS];
@@ -138,7 +142,7 @@ static long xpram_page_out (unsigned long page_addr, unsigned int xpage_index)
 /*
  * Check if xpram is available.
  */
-static int __init xpram_present(void)
+static int xpram_present(void)
 {
 	unsigned long mem_page;
 	int rc;
@@ -154,7 +158,7 @@ static int __init xpram_present(void)
 /*
  * Return index of the last available xpram page.
  */
-static unsigned long __init xpram_highest_page_index(void)
+static unsigned long xpram_highest_page_index(void)
 {
 	unsigned int page_index, add_bit;
 	unsigned long mem_page;
@@ -383,6 +387,106 @@ out:
 }
 
 /*
+ * Save checksums for all partitions.
+ */
+static int xpram_save_checksums(void)
+{
+	unsigned long mem_page;
+	int rc, i;
+
+	rc = 0;
+	mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
+	if (!mem_page)
+		return -ENOMEM;
+	for (i = 0; i < xpram_devs; i++) {
+		rc = xpram_page_in(mem_page, xpram_devices[i].offset);
+		if (rc)
+			goto fail;
+		xpram_devices[i].csum = csum_partial((const void *) mem_page,
+						     PAGE_SIZE, 0);
+	}
+fail:
+	free_page(mem_page);
+	return rc ? -ENXIO : 0;
+}
+
+/*
+ * Verify checksums for all partitions.
+ */
+static int xpram_validate_checksums(void)
+{
+	unsigned long mem_page;
+	unsigned int csum;
+	int rc, i;
+
+	rc = 0;
+	mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
+	if (!mem_page)
+		return -ENOMEM;
+	for (i = 0; i < xpram_devs; i++) {
+		rc = xpram_page_in(mem_page, xpram_devices[i].offset);
+		if (rc)
+			goto fail;
+		csum = csum_partial((const void *) mem_page, PAGE_SIZE, 0);
+		if (xpram_devices[i].csum != csum) {
+			rc = -EINVAL;
+			goto fail;
+		}
+	}
+fail:
+	free_page(mem_page);
+	return rc ? -ENXIO : 0;
+}
+
+/*
+ * Resume failed: Print error message and call panic.
+ */
+static void xpram_resume_error(const char *message)
+{
+	pr_err("Resume error: %s\n", message);
+	panic("xpram resume error\n");
+}
+
+/*
+ * Check if xpram setup changed between suspend and resume.
+ */
+static int xpram_restore(struct device *dev)
+{
+	if (!xpram_pages)
+		return 0;
+	if (xpram_present() != 0)
+		xpram_resume_error("xpram disappeared");
+	if (xpram_pages != xpram_highest_page_index() + 1)
+		xpram_resume_error("Size of xpram changed");
+	if (xpram_validate_checksums())
+		xpram_resume_error("Data of xpram changed");
+	return 0;
+}
+
+/*
+ * Save necessary state in suspend.
+ */
+static int xpram_freeze(struct device *dev)
+{
+	return xpram_save_checksums();
+}
+
+static struct dev_pm_ops xpram_pm_ops = {
+	.freeze		= xpram_freeze,
+	.restore	= xpram_restore,
+};
+
+static struct platform_driver xpram_pdrv = {
+	.driver = {
+		.name	= XPRAM_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &xpram_pm_ops,
+	},
+};
+
+static struct platform_device *xpram_pdev;
+
+/*
  * Finally, the init/exit functions.
  */
 static void __exit xpram_exit(void)
@@ -394,6 +498,8 @@ static void __exit xpram_exit(void)
 		put_disk(xpram_disks[i]);
 	}
 	unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME);
+	platform_device_unregister(xpram_pdev);
+	platform_driver_unregister(&xpram_pdrv);
 }
 
 static int __init xpram_init(void)
@@ -411,7 +517,24 @@ static int __init xpram_init(void)
 	rc = xpram_setup_sizes(xpram_pages);
 	if (rc)
 		return rc;
-	return xpram_setup_blkdev();
+	rc = platform_driver_register(&xpram_pdrv);
+	if (rc)
+		return rc;
+	xpram_pdev = platform_device_register_simple(XPRAM_NAME, -1, NULL, 0);
+	if (IS_ERR(xpram_pdev)) {
+		rc = PTR_ERR(xpram_pdev);
+		goto fail_platform_driver_unregister;
+	}
+	rc = xpram_setup_blkdev();
+	if (rc)
+		goto fail_platform_device_unregister;
+	return 0;
+
+fail_platform_device_unregister:
+	platform_device_unregister(xpram_pdev);
+fail_platform_driver_unregister:
+	platform_driver_unregister(&xpram_pdrv);
+	return rc;
 }
 
 module_init(xpram_init);
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9ab06e0dad4..b79f31add39 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1,14 +1,12 @@
 /*
- *  drivers/s390/char/con3215.c
- *    3215 line mode terminal driver.
+ * 3215 line mode terminal driver.
  *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ * Copyright IBM Corp. 1999, 2009
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  *
- *  Updated:
- *   Aug-2000: Added tab support
- *	       Dan Morrison, IBM Corporation (dmorriso@cse.buffalo.edu)
+ * Updated:
+ *  Aug-2000: Added tab support
+ *	      Dan Morrison, IBM Corporation <dmorriso@cse.buffalo.edu>
  */
 
 #include <linux/module.h>
@@ -56,6 +54,7 @@
 #define RAW3215_CLOSING	    32	      /* set while in close process */
 #define RAW3215_TIMER_RUNS  64	      /* set if the output delay timer is on */
 #define RAW3215_FLUSHING    128	      /* set to flush buffer (no delay) */
+#define RAW3215_FROZEN	    256	      /* set if 3215 is frozen for suspend */
 
 #define TAB_STOP_SIZE	    8	      /* tab stop size */
 
@@ -111,8 +110,8 @@ static struct tty_driver *tty3215_driver;
 /*
  * Get a request structure from the free list
  */
-static inline struct raw3215_req *
-raw3215_alloc_req(void) {
+static inline struct raw3215_req *raw3215_alloc_req(void)
+{
 	struct raw3215_req *req;
 	unsigned long flags;
 
@@ -126,8 +125,8 @@ raw3215_alloc_req(void) {
 /*
  * Put a request structure back to the free list
  */
-static inline void
-raw3215_free_req(struct raw3215_req *req) {
+static inline void raw3215_free_req(struct raw3215_req *req)
+{
 	unsigned long flags;
 
 	if (req->type == RAW3215_FREE)
@@ -145,8 +144,7 @@ raw3215_free_req(struct raw3215_req *req) {
  * because a 3215 terminal won't accept a new read before the old one is
  * completed.
  */
-static void
-raw3215_mk_read_req(struct raw3215_info *raw)
+static void raw3215_mk_read_req(struct raw3215_info *raw)
 {
 	struct raw3215_req *req;
 	struct ccw1 *ccw;
@@ -174,8 +172,7 @@ raw3215_mk_read_req(struct raw3215_info *raw)
  * buffer to the 3215 device. If a queued write exists it is replaced by
  * the new, probably lengthened request.
  */
-static void
-raw3215_mk_write_req(struct raw3215_info *raw)
+static void raw3215_mk_write_req(struct raw3215_info *raw)
 {
 	struct raw3215_req *req;
 	struct ccw1 *ccw;
@@ -251,8 +248,7 @@ raw3215_mk_write_req(struct raw3215_info *raw)
 /*
  * Start a read or a write request
  */
-static void
-raw3215_start_io(struct raw3215_info *raw)
+static void raw3215_start_io(struct raw3215_info *raw)
 {
 	struct raw3215_req *req;
 	int res;
@@ -290,8 +286,7 @@ raw3215_start_io(struct raw3215_info *raw)
 /*
  * Function to start a delayed output after RAW3215_TIMEOUT seconds
  */
-static void
-raw3215_timeout(unsigned long __data)
+static void raw3215_timeout(unsigned long __data)
 {
 	struct raw3215_info *raw = (struct raw3215_info *) __data;
 	unsigned long flags;
@@ -300,8 +295,10 @@ raw3215_timeout(unsigned long __data)
 	if (raw->flags & RAW3215_TIMER_RUNS) {
 		del_timer(&raw->timer);
 		raw->flags &= ~RAW3215_TIMER_RUNS;
-		raw3215_mk_write_req(raw);
-		raw3215_start_io(raw);
+		if (!(raw->flags & RAW3215_FROZEN)) {
+			raw3215_mk_write_req(raw);
+			raw3215_start_io(raw);
+		}
 	}
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }
@@ -312,10 +309,9 @@ raw3215_timeout(unsigned long __data)
  * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not
  * done immediately a timer is started with a delay of RAW3215_TIMEOUT.
  */
-static inline void
-raw3215_try_io(struct raw3215_info *raw)
+static inline void raw3215_try_io(struct raw3215_info *raw)
 {
-	if (!(raw->flags & RAW3215_ACTIVE))
+	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FROZEN))
 		return;
 	if (raw->queued_read != NULL)
 		raw3215_start_io(raw);
@@ -359,8 +355,8 @@ static void raw3215_next_io(struct raw3215_info *raw)
 /*
  * Interrupt routine, called from common io layer
  */
-static void
-raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
+static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
+			struct irb *irb)
 {
 	struct raw3215_info *raw;
 	struct raw3215_req *req;
@@ -459,14 +455,40 @@ raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 }
 
 /*
+ * Drop the oldest line from the output buffer.
+ */
+static void raw3215_drop_line(struct raw3215_info *raw)
+{
+	int ix;
+	char ch;
+
+	BUG_ON(raw->written != 0);
+	ix = (raw->head - raw->count) & (RAW3215_BUFFER_SIZE - 1);
+	while (raw->count > 0) {
+		ch = raw->buffer[ix];
+		ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1);
+		raw->count--;
+		if (ch == 0x15)
+			break;
+	}
+	raw->head = ix;
+}
+
+/*
  * Wait until length bytes are available int the output buffer.
  * Has to be called with the s390irq lock held. Can be called
  * disabled.
  */
-static void
-raw3215_make_room(struct raw3215_info *raw, unsigned int length)
+static void raw3215_make_room(struct raw3215_info *raw, unsigned int length)
 {
 	while (RAW3215_BUFFER_SIZE - raw->count < length) {
+		/* While console is frozen for suspend we have no other
+		 * choice but to drop message from the buffer to make
+		 * room for even more messages. */
+		if (raw->flags & RAW3215_FROZEN) {
+			raw3215_drop_line(raw);
+			continue;
+		}
 		/* there might be a request pending */
 		raw->flags |= RAW3215_FLUSHING;
 		raw3215_mk_write_req(raw);
@@ -488,8 +510,8 @@ raw3215_make_room(struct raw3215_info *raw, unsigned int length)
 /*
  * String write routine for 3215 devices
  */
-static void
-raw3215_write(struct raw3215_info *raw, const char *str, unsigned int length)
+static void raw3215_write(struct raw3215_info *raw, const char *str,
+			  unsigned int length)
 {
 	unsigned long flags;
 	int c, count;
@@ -529,8 +551,7 @@ raw3215_write(struct raw3215_info *raw, const char *str, unsigned int length)
 /*
  * Put character routine for 3215 devices
  */
-static void
-raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
+static void raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
 {
 	unsigned long flags;
 	unsigned int length, i;
@@ -566,8 +587,7 @@ raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
  * Flush routine, it simply sets the flush flag and tries to start
  * pending IO.
  */
-static void
-raw3215_flush_buffer(struct raw3215_info *raw)
+static void raw3215_flush_buffer(struct raw3215_info *raw)
 {
 	unsigned long flags;
 
@@ -583,8 +603,7 @@ raw3215_flush_buffer(struct raw3215_info *raw)
 /*
  * Fire up a 3215 device.
  */
-static int
-raw3215_startup(struct raw3215_info *raw)
+static int raw3215_startup(struct raw3215_info *raw)
 {
 	unsigned long flags;
 
@@ -602,8 +621,7 @@ raw3215_startup(struct raw3215_info *raw)
 /*
  * Shutdown a 3215 device.
  */
-static void
-raw3215_shutdown(struct raw3215_info *raw)
+static void raw3215_shutdown(struct raw3215_info *raw)
 {
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long flags;
@@ -628,8 +646,7 @@ raw3215_shutdown(struct raw3215_info *raw)
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }
 
-static int
-raw3215_probe (struct ccw_device *cdev)
+static int raw3215_probe (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 	int line;
@@ -675,8 +692,7 @@ raw3215_probe (struct ccw_device *cdev)
 	return 0;
 }
 
-static void
-raw3215_remove (struct ccw_device *cdev)
+static void raw3215_remove (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 
@@ -689,8 +705,7 @@ raw3215_remove (struct ccw_device *cdev)
 	}
 }
 
-static int
-raw3215_set_online (struct ccw_device *cdev)
+static int raw3215_set_online (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 
@@ -701,8 +716,7 @@ raw3215_set_online (struct ccw_device *cdev)
 	return raw3215_startup(raw);
 }
 
-static int
-raw3215_set_offline (struct ccw_device *cdev)
+static int raw3215_set_offline (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 
@@ -715,6 +729,36 @@ raw3215_set_offline (struct ccw_device *cdev)
 	return 0;
 }
 
+static int raw3215_pm_stop(struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	/* Empty the output buffer, then prevent new I/O. */
+	raw = cdev->dev.driver_data;
+	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
+	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
+	raw->flags |= RAW3215_FROZEN;
+	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
+	return 0;
+}
+
+static int raw3215_pm_start(struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	/* Allow I/O again and flush output buffer. */
+	raw = cdev->dev.driver_data;
+	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
+	raw->flags &= ~RAW3215_FROZEN;
+	raw->flags |= RAW3215_FLUSHING;
+	raw3215_try_io(raw);
+	raw->flags &= ~RAW3215_FLUSHING;
+	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
+	return 0;
+}
+
 static struct ccw_device_id raw3215_id[] = {
 	{ CCW_DEVICE(0x3215, 0) },
 	{ /* end of list */ },
@@ -728,14 +772,17 @@ static struct ccw_driver raw3215_ccw_driver = {
 	.remove		= &raw3215_remove,
 	.set_online	= &raw3215_set_online,
 	.set_offline	= &raw3215_set_offline,
+	.freeze		= &raw3215_pm_stop,
+	.thaw		= &raw3215_pm_start,
+	.restore	= &raw3215_pm_start,
 };
 
 #ifdef CONFIG_TN3215_CONSOLE
 /*
  * Write a string to the 3215 console
  */
-static void
-con3215_write(struct console *co, const char *str, unsigned int count)
+static void con3215_write(struct console *co, const char *str,
+			  unsigned int count)
 {
 	struct raw3215_info *raw;
 	int i;
@@ -768,13 +815,17 @@ static struct tty_driver *con3215_device(struct console *c, int *index)
  * panic() calls con3215_flush through a panic_notifier
  * before the system enters a disabled, endless loop.
  */
-static void
-con3215_flush(void)
+static void con3215_flush(void)
 {
 	struct raw3215_info *raw;
 	unsigned long flags;
 
 	raw = raw3215[0];  /* console 3215 is the first one */
+	if (raw->flags & RAW3215_FROZEN)
+		/* The console is still frozen for suspend. */
+		if (ccw_device_force_console())
+			/* Forcing didn't work, no panic message .. */
+			return;
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -811,8 +862,7 @@ static struct console con3215 = {
  * 3215 console initialization code called from console_init().
  * NOTE: This is called before kmalloc is available.
  */
-static int __init
-con3215_init(void)
+static int __init con3215_init(void)
 {
 	struct ccw_device *cdev;
 	struct raw3215_info *raw;
@@ -875,8 +925,7 @@ console_initcall(con3215_init);
  *
  * This routine is called whenever a 3215 tty is opened.
  */
-static int
-tty3215_open(struct tty_struct *tty, struct file * filp)
+static int tty3215_open(struct tty_struct *tty, struct file * filp)
 {
 	struct raw3215_info *raw;
 	int retval, line;
@@ -909,8 +958,7 @@ tty3215_open(struct tty_struct *tty, struct file * filp)
  * This routine is called when the 3215 tty is closed. We wait
  * for the remaining request to be completed. Then we clean up.
  */
-static void
-tty3215_close(struct tty_struct *tty, struct file * filp)
+static void tty3215_close(struct tty_struct *tty, struct file * filp)
 {
 	struct raw3215_info *raw;
 
@@ -927,8 +975,7 @@ tty3215_close(struct tty_struct *tty, struct file * filp)
 /*
  * Returns the amount of free space in the output buffer.
  */
-static int
-tty3215_write_room(struct tty_struct *tty)
+static int tty3215_write_room(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -944,9 +991,8 @@ tty3215_write_room(struct tty_struct *tty)
 /*
  * String write routine for 3215 ttys
  */
-static int
-tty3215_write(struct tty_struct * tty,
-	      const unsigned char *buf, int count)
+static int tty3215_write(struct tty_struct * tty,
+			 const unsigned char *buf, int count)
 {
 	struct raw3215_info *raw;
 
@@ -960,8 +1006,7 @@ tty3215_write(struct tty_struct * tty,
 /*
  * Put character routine for 3215 ttys
  */
-static int
-tty3215_put_char(struct tty_struct *tty, unsigned char ch)
+static int tty3215_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	struct raw3215_info *raw;
 
@@ -972,16 +1017,14 @@ tty3215_put_char(struct tty_struct *tty, unsigned char ch)
 	return 1;
 }
 
-static void
-tty3215_flush_chars(struct tty_struct *tty)
+static void tty3215_flush_chars(struct tty_struct *tty)
 {
 }
 
 /*
  * Returns the number of characters in the output buffer
  */
-static int
-tty3215_chars_in_buffer(struct tty_struct *tty)
+static int tty3215_chars_in_buffer(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -989,8 +1032,7 @@ tty3215_chars_in_buffer(struct tty_struct *tty)
 	return raw->count;
 }
 
-static void
-tty3215_flush_buffer(struct tty_struct *tty)
+static void tty3215_flush_buffer(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -1002,9 +1044,8 @@ tty3215_flush_buffer(struct tty_struct *tty)
 /*
  * Currently we don't have any io controls for 3215 ttys
  */
-static int
-tty3215_ioctl(struct tty_struct *tty, struct file * file,
-	      unsigned int cmd, unsigned long arg)
+static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
+			 unsigned int cmd, unsigned long arg)
 {
 	if (tty->flags & (1 << TTY_IO_ERROR))
 		return -EIO;
@@ -1019,8 +1060,7 @@ tty3215_ioctl(struct tty_struct *tty, struct file * file,
 /*
  * Disable reading from a 3215 tty
  */
-static void
-tty3215_throttle(struct tty_struct * tty)
+static void tty3215_throttle(struct tty_struct * tty)
 {
 	struct raw3215_info *raw;
 
@@ -1031,8 +1071,7 @@ tty3215_throttle(struct tty_struct * tty)
 /*
  * Enable reading from a 3215 tty
  */
-static void
-tty3215_unthrottle(struct tty_struct * tty)
+static void tty3215_unthrottle(struct tty_struct * tty)
 {
 	struct raw3215_info *raw;
 	unsigned long flags;
@@ -1049,8 +1088,7 @@ tty3215_unthrottle(struct tty_struct * tty)
 /*
  * Disable writing to a 3215 tty
  */
-static void
-tty3215_stop(struct tty_struct *tty)
+static void tty3215_stop(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -1061,8 +1099,7 @@ tty3215_stop(struct tty_struct *tty)
 /*
  * Enable writing to a 3215 tty
  */
-static void
-tty3215_start(struct tty_struct *tty)
+static void tty3215_start(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 	unsigned long flags;
@@ -1096,8 +1133,7 @@ static const struct tty_operations tty3215_ops = {
  * 3215 tty registration code called from tty_init().
  * Most kernel services (incl. kmalloc) are available at this poimt.
  */
-static int __init
-tty3215_init(void)
+static int __init tty3215_init(void)
 {
 	struct tty_driver *driver;
 	int ret;
@@ -1142,8 +1178,7 @@ tty3215_init(void)
 	return 0;
 }
 
-static void __exit
-tty3215_exit(void)
+static void __exit tty3215_exit(void)
 {
 	tty_unregister_driver(tty3215_driver);
 	put_tty_driver(tty3215_driver);
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index d028d2ee83d..44d02e371c0 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/con3270.c
- *    IBM/3270 Driver - console view.
+ * IBM/3270 Driver - console view.
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <linux/bootmem.h>
@@ -64,7 +63,7 @@ static struct con3270 *condev;
 #define CON_UPDATE_ERASE	1	/* Use EWRITEA instead of WRITE. */
 #define CON_UPDATE_LIST		2	/* Update lines in tty3270->update. */
 #define CON_UPDATE_STATUS	4	/* Update status line. */
-#define CON_UPDATE_ALL		7
+#define CON_UPDATE_ALL		8	/* Recreate screen. */
 
 static void con3270_update(struct con3270 *);
 
@@ -73,18 +72,10 @@ static void con3270_update(struct con3270 *);
  */
 static void con3270_set_timer(struct con3270 *cp, int expires)
 {
-	if (expires == 0) {
-		if (timer_pending(&cp->timer))
-			del_timer(&cp->timer);
-		return;
-	}
-	if (timer_pending(&cp->timer) &&
-	    mod_timer(&cp->timer, jiffies + expires))
-		return;
-	cp->timer.function = (void (*)(unsigned long)) con3270_update;
-	cp->timer.data = (unsigned long) cp;
-	cp->timer.expires = jiffies + expires;
-	add_timer(&cp->timer);
+	if (expires == 0)
+		del_timer(&cp->timer);
+	else
+		mod_timer(&cp->timer, jiffies + expires);
 }
 
 /*
@@ -225,6 +216,12 @@ con3270_update(struct con3270 *cp)
 
 	spin_lock_irqsave(&cp->view.lock, flags);
 	updated = 0;
+	if (cp->update_flags & CON_UPDATE_ALL) {
+		con3270_rebuild_update(cp);
+		con3270_update_status(cp);
+		cp->update_flags = CON_UPDATE_ERASE | CON_UPDATE_LIST |
+			CON_UPDATE_STATUS;
+	}
 	if (cp->update_flags & CON_UPDATE_ERASE) {
 		/* Use erase write alternate to initialize display. */
 		raw3270_request_set_cmd(wrq, TC_EWRITEA);
@@ -302,7 +299,6 @@ con3270_read_tasklet(struct raw3270_request *rrq)
 		deactivate = 1;
 		break;
 	case 0x6d:	/* clear: start from scratch. */
-		con3270_rebuild_update(cp);
 		cp->update_flags = CON_UPDATE_ALL;
 		con3270_set_timer(cp, 1);
 		break;
@@ -382,30 +378,21 @@ con3270_issue_read(struct con3270 *cp)
 static int
 con3270_activate(struct raw3270_view *view)
 {
-	unsigned long flags;
 	struct con3270 *cp;
 
 	cp = (struct con3270 *) view;
-	spin_lock_irqsave(&cp->view.lock, flags);
-	cp->nr_up = 0;
-	con3270_rebuild_update(cp);
-	con3270_update_status(cp);
 	cp->update_flags = CON_UPDATE_ALL;
 	con3270_set_timer(cp, 1);
-	spin_unlock_irqrestore(&cp->view.lock, flags);
 	return 0;
 }
 
 static void
 con3270_deactivate(struct raw3270_view *view)
 {
-	unsigned long flags;
 	struct con3270 *cp;
 
 	cp = (struct con3270 *) view;
-	spin_lock_irqsave(&cp->view.lock, flags);
 	del_timer(&cp->timer);
-	spin_unlock_irqrestore(&cp->view.lock, flags);
 }
 
 static int
@@ -504,6 +491,7 @@ con3270_write(struct console *co, const char *str, unsigned int count)
 			con3270_cline_end(cp);
 	}
 	/* Setup timer to output current console buffer after 1/10 second */
+	cp->nr_up = 0;
 	if (cp->view.dev && !timer_pending(&cp->timer))
 		con3270_set_timer(cp, HZ/10);
 	spin_unlock_irqrestore(&cp->view.lock,flags);
@@ -541,6 +529,7 @@ con3270_flush(void)
 	cp = condev;
 	if (!cp->view.dev)
 		return;
+	raw3270_pm_unfreeze(&cp->view);
 	spin_lock_irqsave(&cp->view.lock, flags);
 	con3270_wait_write(cp);
 	cp->nr_up = 0;
@@ -624,7 +613,8 @@ con3270_init(void)
 
 	INIT_LIST_HEAD(&condev->lines);
 	INIT_LIST_HEAD(&condev->update);
-	init_timer(&condev->timer);
+	setup_timer(&condev->timer, (void (*)(unsigned long)) con3270_update,
+		    (unsigned long) condev);
 	tasklet_init(&condev->readlet, 
 		     (void (*)(unsigned long)) con3270_read_tasklet,
 		     (unsigned long) condev->read);
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 40759c33477..097d3846a82 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/fs3270.c
- *    IBM/3270 Driver - fullscreen driver.
+ * IBM/3270 Driver - fullscreen driver.
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5/2.6 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5/2.6 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <linux/bootmem.h>
@@ -399,6 +398,11 @@ fs3270_free_view(struct raw3270_view *view)
 static void
 fs3270_release(struct raw3270_view *view)
 {
+	struct fs3270 *fp;
+
+	fp = (struct fs3270 *) view;
+	if (fp->fs_pid)
+		kill_pid(fp->fs_pid, SIGHUP, 1);
 }
 
 /* View to a 3270 device. Can be console, tty or fullscreen. */
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 97e63cf4694..75a8831eebb 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -1,10 +1,9 @@
 /*
- * drivers/s390/char/monreader.c
- *
  * Character device driver for reading z/VM *MONITOR service records.
  *
- *   Copyright IBM Corp. 2004, 2008
- *   Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
+ * Copyright IBM Corp. 2004, 2009
+ *
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 #define KMSG_COMPONENT "monreader"
@@ -22,6 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
+#include <linux/device.h>
 #include <net/iucv/iucv.h>
 #include <asm/uaccess.h>
 #include <asm/ebcdic.h>
@@ -78,6 +78,7 @@ static u8 user_data_sever[16] = {
 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 };
 
+static struct device *monreader_device;
 
 /******************************************************************************
  *                             helper functions                               *
@@ -319,11 +320,12 @@ static int mon_open(struct inode *inode, struct file *filp)
 		goto out_path;
 	}
 	filp->private_data = monpriv;
+	monreader_device->driver_data = monpriv;
 	unlock_kernel();
 	return nonseekable_open(inode, filp);
 
 out_path:
-	kfree(monpriv->path);
+	iucv_path_free(monpriv->path);
 out_priv:
 	mon_free_mem(monpriv);
 out_use:
@@ -341,10 +343,13 @@ static int mon_close(struct inode *inode, struct file *filp)
 	/*
 	 * Close IUCV connection and unregister
 	 */
-	rc = iucv_path_sever(monpriv->path, user_data_sever);
-	if (rc)
-		pr_warning("Disconnecting the z/VM *MONITOR system service "
-			   "failed with rc=%i\n", rc);
+	if (monpriv->path) {
+		rc = iucv_path_sever(monpriv->path, user_data_sever);
+		if (rc)
+			pr_warning("Disconnecting the z/VM *MONITOR system "
+				   "service failed with rc=%i\n", rc);
+		iucv_path_free(monpriv->path);
+	}
 
 	atomic_set(&monpriv->iucv_severed, 0);
 	atomic_set(&monpriv->iucv_connected, 0);
@@ -452,6 +457,94 @@ static struct miscdevice mon_dev = {
 	.minor      = MISC_DYNAMIC_MINOR,
 };
 
+
+/******************************************************************************
+ *				suspend / resume			      *
+ *****************************************************************************/
+static int monreader_freeze(struct device *dev)
+{
+	struct mon_private *monpriv = dev->driver_data;
+	int rc;
+
+	if (!monpriv)
+		return 0;
+	if (monpriv->path) {
+		rc = iucv_path_sever(monpriv->path, user_data_sever);
+		if (rc)
+			pr_warning("Disconnecting the z/VM *MONITOR system "
+				   "service failed with rc=%i\n", rc);
+		iucv_path_free(monpriv->path);
+	}
+	atomic_set(&monpriv->iucv_severed, 0);
+	atomic_set(&monpriv->iucv_connected, 0);
+	atomic_set(&monpriv->read_ready, 0);
+	atomic_set(&monpriv->msglim_count, 0);
+	monpriv->write_index  = 0;
+	monpriv->read_index   = 0;
+	monpriv->path = NULL;
+	return 0;
+}
+
+static int monreader_thaw(struct device *dev)
+{
+	struct mon_private *monpriv = dev->driver_data;
+	int rc;
+
+	if (!monpriv)
+		return 0;
+	rc = -ENOMEM;
+	monpriv->path = iucv_path_alloc(MON_MSGLIM, IUCV_IPRMDATA, GFP_KERNEL);
+	if (!monpriv->path)
+		goto out;
+	rc = iucv_path_connect(monpriv->path, &monreader_iucv_handler,
+			       MON_SERVICE, NULL, user_data_connect, monpriv);
+	if (rc) {
+		pr_err("Connecting to the z/VM *MONITOR system service "
+		       "failed with rc=%i\n", rc);
+		goto out_path;
+	}
+	wait_event(mon_conn_wait_queue,
+		   atomic_read(&monpriv->iucv_connected) ||
+		   atomic_read(&monpriv->iucv_severed));
+	if (atomic_read(&monpriv->iucv_severed))
+		goto out_path;
+	return 0;
+out_path:
+	rc = -EIO;
+	iucv_path_free(monpriv->path);
+	monpriv->path = NULL;
+out:
+	atomic_set(&monpriv->iucv_severed, 1);
+	return rc;
+}
+
+static int monreader_restore(struct device *dev)
+{
+	int rc;
+
+	segment_unload(mon_dcss_name);
+	rc = segment_load(mon_dcss_name, SEGMENT_SHARED,
+			  &mon_dcss_start, &mon_dcss_end);
+	if (rc < 0) {
+		segment_warning(rc, mon_dcss_name);
+		panic("fatal monreader resume error: no monitor dcss\n");
+	}
+	return monreader_thaw(dev);
+}
+
+static struct dev_pm_ops monreader_pm_ops = {
+	.freeze  = monreader_freeze,
+	.thaw	 = monreader_thaw,
+	.restore = monreader_restore,
+};
+
+static struct device_driver monreader_driver = {
+	.name = "monreader",
+	.bus  = &iucv_bus,
+	.pm   = &monreader_pm_ops,
+};
+
+
 /******************************************************************************
  *                              module init/exit                              *
  *****************************************************************************/
@@ -475,16 +568,33 @@ static int __init mon_init(void)
 		return rc;
 	}
 
+	rc = driver_register(&monreader_driver);
+	if (rc)
+		goto out_iucv;
+	monreader_device = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!monreader_device)
+		goto out_driver;
+	dev_set_name(monreader_device, "monreader-dev");
+	monreader_device->bus = &iucv_bus;
+	monreader_device->parent = iucv_root;
+	monreader_device->driver = &monreader_driver;
+	monreader_device->release = (void (*)(struct device *))kfree;
+	rc = device_register(monreader_device);
+	if (rc) {
+		kfree(monreader_device);
+		goto out_driver;
+	}
+
 	rc = segment_type(mon_dcss_name);
 	if (rc < 0) {
 		segment_warning(rc, mon_dcss_name);
-		goto out_iucv;
+		goto out_device;
 	}
 	if (rc != SEG_TYPE_SC) {
 		pr_err("The specified *MONITOR DCSS %s does not have the "
 		       "required type SC\n", mon_dcss_name);
 		rc = -EINVAL;
-		goto out_iucv;
+		goto out_device;
 	}
 
 	rc = segment_load(mon_dcss_name, SEGMENT_SHARED,
@@ -492,7 +602,7 @@ static int __init mon_init(void)
 	if (rc < 0) {
 		segment_warning(rc, mon_dcss_name);
 		rc = -EINVAL;
-		goto out_iucv;
+		goto out_device;
 	}
 	dcss_mkname(mon_dcss_name, &user_data_connect[8]);
 
@@ -503,6 +613,10 @@ static int __init mon_init(void)
 
 out:
 	segment_unload(mon_dcss_name);
+out_device:
+	device_unregister(monreader_device);
+out_driver:
+	driver_unregister(&monreader_driver);
 out_iucv:
 	iucv_unregister(&monreader_iucv_handler, 1);
 	return rc;
@@ -512,6 +626,8 @@ static void __exit mon_exit(void)
 {
 	segment_unload(mon_dcss_name);
 	WARN_ON(misc_deregister(&mon_dev) != 0);
+	device_unregister(monreader_device);
+	driver_unregister(&monreader_driver);
 	iucv_unregister(&monreader_iucv_handler, 1);
 	return;
 }
diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c
index c7d7483bab9..66fb8eba93f 100644
--- a/drivers/s390/char/monwriter.c
+++ b/drivers/s390/char/monwriter.c
@@ -1,9 +1,7 @@
 /*
- * drivers/s390/char/monwriter.c
- *
  * Character device driver for writing z/VM *MONITOR service records.
  *
- * Copyright (C) IBM Corp. 2006
+ * Copyright IBM Corp. 2006, 2009
  *
  * Author(s): Melissa Howland <Melissa.Howland@us.ibm.com>
  */
@@ -22,6 +20,7 @@
 #include <linux/ctype.h>
 #include <linux/poll.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <asm/uaccess.h>
 #include <asm/ebcdic.h>
 #include <asm/io.h>
@@ -40,7 +39,10 @@ struct mon_buf {
 	char *data;
 };
 
+static LIST_HEAD(mon_priv_list);
+
 struct mon_private {
+	struct list_head priv_list;
 	struct list_head list;
 	struct monwrite_hdr hdr;
 	size_t hdr_to_read;
@@ -188,6 +190,7 @@ static int monwrite_open(struct inode *inode, struct file *filp)
 	monpriv->hdr_to_read = sizeof(monpriv->hdr);
 	mutex_init(&monpriv->thread_mutex);
 	filp->private_data = monpriv;
+	list_add_tail(&monpriv->priv_list, &mon_priv_list);
 	unlock_kernel();
 	return nonseekable_open(inode, filp);
 }
@@ -206,6 +209,7 @@ static int monwrite_close(struct inode *inode, struct file *filp)
 		kfree(entry->data);
 		kfree(entry);
 	}
+	list_del(&monpriv->priv_list);
 	kfree(monpriv);
 	return 0;
 }
@@ -281,20 +285,102 @@ static struct miscdevice mon_dev = {
 };
 
 /*
+ * suspend/resume
+ */
+
+static int monwriter_freeze(struct device *dev)
+{
+	struct mon_private *monpriv;
+	struct mon_buf *monbuf;
+
+	list_for_each_entry(monpriv, &mon_priv_list, priv_list) {
+		list_for_each_entry(monbuf, &monpriv->list, list) {
+			if (monbuf->hdr.mon_function != MONWRITE_GEN_EVENT)
+				monwrite_diag(&monbuf->hdr, monbuf->data,
+					      APPLDATA_STOP_REC);
+		}
+	}
+	return 0;
+}
+
+static int monwriter_restore(struct device *dev)
+{
+	struct mon_private *monpriv;
+	struct mon_buf *monbuf;
+
+	list_for_each_entry(monpriv, &mon_priv_list, priv_list) {
+		list_for_each_entry(monbuf, &monpriv->list, list) {
+			if (monbuf->hdr.mon_function == MONWRITE_START_INTERVAL)
+				monwrite_diag(&monbuf->hdr, monbuf->data,
+					      APPLDATA_START_INTERVAL_REC);
+			if (monbuf->hdr.mon_function == MONWRITE_START_CONFIG)
+				monwrite_diag(&monbuf->hdr, monbuf->data,
+					      APPLDATA_START_CONFIG_REC);
+		}
+	}
+	return 0;
+}
+
+static int monwriter_thaw(struct device *dev)
+{
+	return monwriter_restore(dev);
+}
+
+static struct dev_pm_ops monwriter_pm_ops = {
+	.freeze		= monwriter_freeze,
+	.thaw		= monwriter_thaw,
+	.restore	= monwriter_restore,
+};
+
+static struct platform_driver monwriter_pdrv = {
+	.driver = {
+		.name	= "monwriter",
+		.owner	= THIS_MODULE,
+		.pm	= &monwriter_pm_ops,
+	},
+};
+
+static struct platform_device *monwriter_pdev;
+
+/*
  * module init/exit
  */
 
 static int __init mon_init(void)
 {
-	if (MACHINE_IS_VM)
-		return misc_register(&mon_dev);
-	else
+	int rc;
+
+	if (!MACHINE_IS_VM)
 		return -ENODEV;
+
+	rc = platform_driver_register(&monwriter_pdrv);
+	if (rc)
+		return rc;
+
+	monwriter_pdev = platform_device_register_simple("monwriter", -1, NULL,
+							0);
+	if (IS_ERR(monwriter_pdev)) {
+		rc = PTR_ERR(monwriter_pdev);
+		goto out_driver;
+	}
+
+	rc = misc_register(&mon_dev);
+	if (rc)
+		goto out_device;
+	return 0;
+
+out_device:
+	platform_device_unregister(monwriter_pdev);
+out_driver:
+	platform_driver_unregister(&monwriter_pdrv);
+	return rc;
 }
 
 static void __exit mon_exit(void)
 {
 	WARN_ON(misc_deregister(&mon_dev) != 0);
+	platform_device_unregister(monwriter_pdev);
+	platform_driver_unregister(&monwriter_pdrv);
 }
 
 module_init(mon_init);
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 0b15cf107ec..81c151b5f0a 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/raw3270.c
- *    IBM/3270 Driver - core functions.
+ * IBM/3270 Driver - core functions.
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <linux/bootmem.h>
@@ -61,6 +60,7 @@ struct raw3270 {
 #define RAW3270_FLAGS_ATTN	2	/* Device sent an ATTN interrupt */
 #define RAW3270_FLAGS_READY	4	/* Device is useable by views */
 #define RAW3270_FLAGS_CONSOLE	8	/* Device is the console. */
+#define RAW3270_FLAGS_FROZEN	16	/* set if 3270 is frozen for suspend */
 
 /* Semaphore to protect global data of raw3270 (devices, views, etc). */
 static DEFINE_MUTEX(raw3270_mutex);
@@ -306,7 +306,8 @@ raw3270_start(struct raw3270_view *view, struct raw3270_request *rq)
 
 	spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
 	rp = view->dev;
-	if (!rp || rp->view != view)
+	if (!rp || rp->view != view ||
+	    test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		rc = -EACCES;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
@@ -323,7 +324,8 @@ raw3270_start_locked(struct raw3270_view *view, struct raw3270_request *rq)
 	int rc;
 
 	rp = view->dev;
-	if (!rp || rp->view != view)
+	if (!rp || rp->view != view ||
+	    test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		rc = -EACCES;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
@@ -764,7 +766,8 @@ raw3270_reset(struct raw3270_view *view)
 	int rc;
 
 	rp = view->dev;
-	if (!rp || rp->view != view)
+	if (!rp || rp->view != view ||
+	    test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		rc = -EACCES;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
@@ -922,6 +925,8 @@ raw3270_activate_view(struct raw3270_view *view)
 		rc = 0;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
+	else if (test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
+		rc = -EACCES;
 	else {
 		oldview = NULL;
 		if (rp->view) {
@@ -969,7 +974,8 @@ raw3270_deactivate_view(struct raw3270_view *view)
 		list_del_init(&view->list);
 		list_add_tail(&view->list, &rp->view_list);
 		/* Try to activate another view. */
-		if (test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+		if (test_bit(RAW3270_FLAGS_READY, &rp->flags) &&
+		    !test_bit(RAW3270_FLAGS_FROZEN, &rp->flags)) {
 			list_for_each_entry(view, &rp->view_list, list) {
 				rp->view = view;
 				if (view->fn->activate(view) == 0)
@@ -1068,7 +1074,8 @@ raw3270_del_view(struct raw3270_view *view)
 		rp->view = NULL;
 	}
 	list_del_init(&view->list);
-	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags) &&
+	    !test_bit(RAW3270_FLAGS_FROZEN, &rp->flags)) {
 		/* Try to activate another view. */
 		list_for_each_entry(nv, &rp->view_list, list) {
 			if (nv->fn->activate(nv) == 0) {
@@ -1337,6 +1344,58 @@ raw3270_set_offline (struct ccw_device *cdev)
 	return 0;
 }
 
+static int raw3270_pm_stop(struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	struct raw3270_view *view;
+	unsigned long flags;
+
+	rp = cdev->dev.driver_data;
+	if (!rp)
+		return 0;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	if (rp->view)
+		rp->view->fn->deactivate(rp->view);
+	if (!test_bit(RAW3270_FLAGS_CONSOLE, &rp->flags)) {
+		/*
+		 * Release tty and fullscreen for all non-console
+		 * devices.
+		 */
+		list_for_each_entry(view, &rp->view_list, list) {
+			if (view->fn->release)
+				view->fn->release(view);
+		}
+	}
+	set_bit(RAW3270_FLAGS_FROZEN, &rp->flags);
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	return 0;
+}
+
+static int raw3270_pm_start(struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	unsigned long flags;
+
+	rp = cdev->dev.driver_data;
+	if (!rp)
+		return 0;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	clear_bit(RAW3270_FLAGS_FROZEN, &rp->flags);
+	if (rp->view)
+		rp->view->fn->activate(rp->view);
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	return 0;
+}
+
+void raw3270_pm_unfreeze(struct raw3270_view *view)
+{
+	struct raw3270 *rp;
+
+	rp = view->dev;
+	if (rp && test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
+		ccw_device_force_console();
+}
+
 static struct ccw_device_id raw3270_id[] = {
 	{ CCW_DEVICE(0x3270, 0) },
 	{ CCW_DEVICE(0x3271, 0) },
@@ -1360,6 +1419,9 @@ static struct ccw_driver raw3270_ccw_driver = {
 	.remove		= &raw3270_remove,
 	.set_online	= &raw3270_set_online,
 	.set_offline	= &raw3270_set_offline,
+	.freeze		= &raw3270_pm_stop,
+	.thaw		= &raw3270_pm_start,
+	.restore	= &raw3270_pm_start,
 };
 
 static int
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
index 90beaa80a78..ed34eb2199c 100644
--- a/drivers/s390/char/raw3270.h
+++ b/drivers/s390/char/raw3270.h
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/raw3270.h
- *    IBM/3270 Driver
+ * IBM/3270 Driver
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <asm/idals.h>
@@ -195,6 +194,7 @@ void raw3270_wait_cons_dev(struct raw3270 *);
 /* Notifier for device addition/removal */
 int raw3270_register_notifier(void (*notifier)(int, int));
 void raw3270_unregister_notifier(void (*notifier)(int, int));
+void raw3270_pm_unfreeze(struct raw3270_view *);
 
 /*
  * Little memory allocator for string objects. 
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 4377e93a43d..a983f508678 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/sclp.c
- *     core function to access sclp interface
+ * core function to access sclp interface
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corp. 1999, 2009
+ *
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/module.h>
@@ -16,6 +15,9 @@
 #include <linux/reboot.h>
 #include <linux/jiffies.h>
 #include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
 #include <asm/types.h>
 #include <asm/s390_ext.h>
 
@@ -47,6 +49,16 @@ static struct sclp_req sclp_init_req;
 static char sclp_read_sccb[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 static char sclp_init_sccb[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
+/* Suspend request */
+static DECLARE_COMPLETION(sclp_request_queue_flushed);
+
+static void sclp_suspend_req_cb(struct sclp_req *req, void *data)
+{
+	complete(&sclp_request_queue_flushed);
+}
+
+static struct sclp_req sclp_suspend_req;
+
 /* Timer for request retries. */
 static struct timer_list sclp_request_timer;
 
@@ -84,6 +96,12 @@ static volatile enum sclp_mask_state_t {
 	sclp_mask_state_initializing
 } sclp_mask_state = sclp_mask_state_idle;
 
+/* Internal state: is the driver suspended? */
+static enum sclp_suspend_state_t {
+	sclp_suspend_state_running,
+	sclp_suspend_state_suspended,
+} sclp_suspend_state = sclp_suspend_state_running;
+
 /* Maximum retry counts */
 #define SCLP_INIT_RETRY		3
 #define SCLP_MASK_RETRY		3
@@ -211,6 +229,8 @@ sclp_process_queue(void)
 	del_timer(&sclp_request_timer);
 	while (!list_empty(&sclp_req_queue)) {
 		req = list_entry(sclp_req_queue.next, struct sclp_req, list);
+		if (!req->sccb)
+			goto do_post;
 		rc = __sclp_start_request(req);
 		if (rc == 0)
 			break;
@@ -222,6 +242,7 @@ sclp_process_queue(void)
 						 sclp_request_timeout, 0);
 			break;
 		}
+do_post:
 		/* Post-processing for aborted request */
 		list_del(&req->list);
 		if (req->callback) {
@@ -233,6 +254,19 @@ sclp_process_queue(void)
 	spin_unlock_irqrestore(&sclp_lock, flags);
 }
 
+static int __sclp_can_add_request(struct sclp_req *req)
+{
+	if (req == &sclp_suspend_req || req == &sclp_init_req)
+		return 1;
+	if (sclp_suspend_state != sclp_suspend_state_running)
+		return 0;
+	if (sclp_init_state != sclp_init_state_initialized)
+		return 0;
+	if (sclp_activation_state != sclp_activation_state_active)
+		return 0;
+	return 1;
+}
+
 /* Queue a new request. Return zero on success, non-zero otherwise. */
 int
 sclp_add_request(struct sclp_req *req)
@@ -241,9 +275,7 @@ sclp_add_request(struct sclp_req *req)
 	int rc;
 
 	spin_lock_irqsave(&sclp_lock, flags);
-	if ((sclp_init_state != sclp_init_state_initialized ||
-	     sclp_activation_state != sclp_activation_state_active) &&
-	    req != &sclp_init_req) {
+	if (!__sclp_can_add_request(req)) {
 		spin_unlock_irqrestore(&sclp_lock, flags);
 		return -EIO;
 	}
@@ -254,10 +286,16 @@ sclp_add_request(struct sclp_req *req)
 	/* Start if request is first in list */
 	if (sclp_running_state == sclp_running_state_idle &&
 	    req->list.prev == &sclp_req_queue) {
+		if (!req->sccb) {
+			list_del(&req->list);
+			rc = -ENODATA;
+			goto out;
+		}
 		rc = __sclp_start_request(req);
 		if (rc)
 			list_del(&req->list);
 	}
+out:
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	return rc;
 }
@@ -560,6 +598,7 @@ sclp_register(struct sclp_register *reg)
 	/* Trigger initial state change callback */
 	reg->sclp_receive_mask = 0;
 	reg->sclp_send_mask = 0;
+	reg->pm_event_posted = 0;
 	list_add(&reg->list, &sclp_reg_list);
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	rc = sclp_init_mask(1);
@@ -880,20 +919,134 @@ static struct notifier_block sclp_reboot_notifier = {
 	.notifier_call = sclp_reboot_event
 };
 
+/*
+ * Suspend/resume SCLP notifier implementation
+ */
+
+static void sclp_pm_event(enum sclp_pm_event sclp_pm_event, int rollback)
+{
+	struct sclp_register *reg;
+	unsigned long flags;
+
+	if (!rollback) {
+		spin_lock_irqsave(&sclp_lock, flags);
+		list_for_each_entry(reg, &sclp_reg_list, list)
+			reg->pm_event_posted = 0;
+		spin_unlock_irqrestore(&sclp_lock, flags);
+	}
+	do {
+		spin_lock_irqsave(&sclp_lock, flags);
+		list_for_each_entry(reg, &sclp_reg_list, list) {
+			if (rollback && reg->pm_event_posted)
+				goto found;
+			if (!rollback && !reg->pm_event_posted)
+				goto found;
+		}
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return;
+found:
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		if (reg->pm_event_fn)
+			reg->pm_event_fn(reg, sclp_pm_event);
+		reg->pm_event_posted = rollback ? 0 : 1;
+	} while (1);
+}
+
+/*
+ * Susend/resume callbacks for platform device
+ */
+
+static int sclp_freeze(struct device *dev)
+{
+	unsigned long flags;
+	int rc;
+
+	sclp_pm_event(SCLP_PM_EVENT_FREEZE, 0);
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_suspend_state = sclp_suspend_state_suspended;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+
+	/* Init supend data */
+	memset(&sclp_suspend_req, 0, sizeof(sclp_suspend_req));
+	sclp_suspend_req.callback = sclp_suspend_req_cb;
+	sclp_suspend_req.status = SCLP_REQ_FILLED;
+	init_completion(&sclp_request_queue_flushed);
+
+	rc = sclp_add_request(&sclp_suspend_req);
+	if (rc == 0)
+		wait_for_completion(&sclp_request_queue_flushed);
+	else if (rc != -ENODATA)
+		goto fail_thaw;
+
+	rc = sclp_deactivate();
+	if (rc)
+		goto fail_thaw;
+	return 0;
+
+fail_thaw:
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_suspend_state = sclp_suspend_state_running;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	sclp_pm_event(SCLP_PM_EVENT_THAW, 1);
+	return rc;
+}
+
+static int sclp_undo_suspend(enum sclp_pm_event event)
+{
+	unsigned long flags;
+	int rc;
+
+	rc = sclp_reactivate();
+	if (rc)
+		return rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_suspend_state = sclp_suspend_state_running;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+
+	sclp_pm_event(event, 0);
+	return 0;
+}
+
+static int sclp_thaw(struct device *dev)
+{
+	return sclp_undo_suspend(SCLP_PM_EVENT_THAW);
+}
+
+static int sclp_restore(struct device *dev)
+{
+	return sclp_undo_suspend(SCLP_PM_EVENT_RESTORE);
+}
+
+static struct dev_pm_ops sclp_pm_ops = {
+	.freeze		= sclp_freeze,
+	.thaw		= sclp_thaw,
+	.restore	= sclp_restore,
+};
+
+static struct platform_driver sclp_pdrv = {
+	.driver = {
+		.name	= "sclp",
+		.owner	= THIS_MODULE,
+		.pm	= &sclp_pm_ops,
+	},
+};
+
+static struct platform_device *sclp_pdev;
+
 /* Initialize SCLP driver. Return zero if driver is operational, non-zero
  * otherwise. */
 static int
 sclp_init(void)
 {
 	unsigned long flags;
-	int rc;
+	int rc = 0;
 
 	spin_lock_irqsave(&sclp_lock, flags);
 	/* Check for previous or running initialization */
-	if (sclp_init_state != sclp_init_state_uninitialized) {
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return 0;
-	}
+	if (sclp_init_state != sclp_init_state_uninitialized)
+		goto fail_unlock;
 	sclp_init_state = sclp_init_state_initializing;
 	/* Set up variables */
 	INIT_LIST_HEAD(&sclp_req_queue);
@@ -904,27 +1057,17 @@ sclp_init(void)
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	rc = sclp_check_interface();
 	spin_lock_irqsave(&sclp_lock, flags);
-	if (rc) {
-		sclp_init_state = sclp_init_state_uninitialized;
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return rc;
-	}
+	if (rc)
+		goto fail_init_state_uninitialized;
 	/* Register reboot handler */
 	rc = register_reboot_notifier(&sclp_reboot_notifier);
-	if (rc) {
-		sclp_init_state = sclp_init_state_uninitialized;
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return rc;
-	}
+	if (rc)
+		goto fail_init_state_uninitialized;
 	/* Register interrupt handler */
 	rc = register_early_external_interrupt(0x2401, sclp_interrupt_handler,
 					       &ext_int_info_hwc);
-	if (rc) {
-		unregister_reboot_notifier(&sclp_reboot_notifier);
-		sclp_init_state = sclp_init_state_uninitialized;
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return rc;
-	}
+	if (rc)
+		goto fail_unregister_reboot_notifier;
 	sclp_init_state = sclp_init_state_initialized;
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	/* Enable service-signal external interruption - needs to happen with
@@ -932,11 +1075,56 @@ sclp_init(void)
 	ctl_set_bit(0, 9);
 	sclp_init_mask(1);
 	return 0;
+
+fail_unregister_reboot_notifier:
+	unregister_reboot_notifier(&sclp_reboot_notifier);
+fail_init_state_uninitialized:
+	sclp_init_state = sclp_init_state_uninitialized;
+fail_unlock:
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
 }
 
+/*
+ * SCLP panic notifier: If we are suspended, we thaw SCLP in order to be able
+ * to print the panic message.
+ */
+static int sclp_panic_notify(struct notifier_block *self,
+			     unsigned long event, void *data)
+{
+	if (sclp_suspend_state == sclp_suspend_state_suspended)
+		sclp_undo_suspend(SCLP_PM_EVENT_THAW);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sclp_on_panic_nb = {
+	.notifier_call = sclp_panic_notify,
+	.priority = SCLP_PANIC_PRIO,
+};
+
 static __init int sclp_initcall(void)
 {
+	int rc;
+
+	rc = platform_driver_register(&sclp_pdrv);
+	if (rc)
+		return rc;
+	sclp_pdev = platform_device_register_simple("sclp", -1, NULL, 0);
+	rc = IS_ERR(sclp_pdev) ? PTR_ERR(sclp_pdev) : 0;
+	if (rc)
+		goto fail_platform_driver_unregister;
+	rc = atomic_notifier_chain_register(&panic_notifier_list,
+					    &sclp_on_panic_nb);
+	if (rc)
+		goto fail_platform_device_unregister;
+
 	return sclp_init();
+
+fail_platform_device_unregister:
+	platform_device_unregister(sclp_pdev);
+fail_platform_driver_unregister:
+	platform_driver_unregister(&sclp_pdrv);
+	return rc;
 }
 
 arch_initcall(sclp_initcall);
diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h
index bac80e856f9..60e7cb07095 100644
--- a/drivers/s390/char/sclp.h
+++ b/drivers/s390/char/sclp.h
@@ -1,10 +1,8 @@
 /*
- *  drivers/s390/char/sclp.h
+ * Copyright IBM Corp. 1999, 2009
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __SCLP_H__
@@ -17,7 +15,7 @@
 
 /* maximum number of pages concerning our own memory management */
 #define MAX_KMEM_PAGES (sizeof(unsigned long) << 3)
-#define MAX_CONSOLE_PAGES	4
+#define MAX_CONSOLE_PAGES	6
 
 #define EVTYP_OPCMD		0x01
 #define EVTYP_MSG		0x02
@@ -68,6 +66,15 @@ typedef unsigned int sclp_cmdw_t;
 
 #define GDS_KEY_SELFDEFTEXTMSG	0x31
 
+enum sclp_pm_event {
+	SCLP_PM_EVENT_FREEZE,
+	SCLP_PM_EVENT_THAW,
+	SCLP_PM_EVENT_RESTORE,
+};
+
+#define SCLP_PANIC_PRIO		1
+#define SCLP_PANIC_PRIO_CLIENT	0
+
 typedef u32 sccb_mask_t;	/* ATTENTION: assumes 32bit mask !!! */
 
 struct sccb_header {
@@ -134,6 +141,10 @@ struct sclp_register {
 	void (*state_change_fn)(struct sclp_register *);
 	/* called for events in cp_receive_mask/sclp_receive_mask */
 	void (*receiver_fn)(struct evbuf_header *);
+	/* called for power management events */
+	void (*pm_event_fn)(struct sclp_register *, enum sclp_pm_event);
+	/* pm event posted flag */
+	int pm_event_posted;
 };
 
 /* externals from sclp.c */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 77ab6e34a10..5cc11c636d3 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -1,9 +1,8 @@
 /*
- *  drivers/s390/char/sclp_cmd.c
+ * Copyright IBM Corp. 2007, 2009
  *
- *    Copyright IBM Corp. 2007
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
- *		 Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *	      Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
 #define KMSG_COMPONENT "sclp_cmd"
@@ -12,11 +11,13 @@
 #include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
 #include <asm/chpid.h>
 #include <asm/sclp.h>
 #include <asm/setup.h>
@@ -292,6 +293,7 @@ static DEFINE_MUTEX(sclp_mem_mutex);
 static LIST_HEAD(sclp_mem_list);
 static u8 sclp_max_storage_id;
 static unsigned long sclp_storage_ids[256 / BITS_PER_LONG];
+static int sclp_mem_state_changed;
 
 struct memory_increment {
 	struct list_head list;
@@ -450,6 +452,8 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 		rc = -EINVAL;
 		break;
 	}
+	if (!rc)
+		sclp_mem_state_changed = 1;
 	mutex_unlock(&sclp_mem_mutex);
 	return rc ? NOTIFY_BAD : NOTIFY_OK;
 }
@@ -525,6 +529,14 @@ static void __init insert_increment(u16 rn, int standby, int assigned)
 	list_add(&new_incr->list, prev);
 }
 
+static int sclp_mem_freeze(struct device *dev)
+{
+	if (!sclp_mem_state_changed)
+		return 0;
+	pr_err("Memory hotplug state changed, suspend refused.\n");
+	return -EPERM;
+}
+
 struct read_storage_sccb {
 	struct sccb_header header;
 	u16 max_id;
@@ -534,8 +546,20 @@ struct read_storage_sccb {
 	u32 entries[0];
 } __packed;
 
+static struct dev_pm_ops sclp_mem_pm_ops = {
+	.freeze		= sclp_mem_freeze,
+};
+
+static struct platform_driver sclp_mem_pdrv = {
+	.driver = {
+		.name	= "sclp_mem",
+		.pm	= &sclp_mem_pm_ops,
+	},
+};
+
 static int __init sclp_detect_standby_memory(void)
 {
+	struct platform_device *sclp_pdev;
 	struct read_storage_sccb *sccb;
 	int i, id, assigned, rc;
 
@@ -588,7 +612,17 @@ static int __init sclp_detect_standby_memory(void)
 	rc = register_memory_notifier(&sclp_mem_nb);
 	if (rc)
 		goto out;
+	rc = platform_driver_register(&sclp_mem_pdrv);
+	if (rc)
+		goto out;
+	sclp_pdev = platform_device_register_simple("sclp_mem", -1, NULL, 0);
+	rc = IS_ERR(sclp_pdev) ? PTR_ERR(sclp_pdev) : 0;
+	if (rc)
+		goto out_driver;
 	sclp_add_standby_memory();
+	goto out;
+out_driver:
+	platform_driver_unregister(&sclp_mem_pdrv);
 out:
 	free_page((unsigned long) sccb);
 	return rc;
diff --git a/drivers/s390/char/sclp_con.c b/drivers/s390/char/sclp_con.c
index 9a25c4bd142..336811a7767 100644
--- a/drivers/s390/char/sclp_con.c
+++ b/drivers/s390/char/sclp_con.c
@@ -1,11 +1,9 @@
 /*
- *  drivers/s390/char/sclp_con.c
- *    SCLP line mode console driver
+ * SCLP line mode console driver
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corp. 1999, 2009
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/kmod.h>
@@ -32,13 +30,14 @@ static spinlock_t sclp_con_lock;
 static struct list_head sclp_con_pages;
 /* List of full struct sclp_buffer structures ready for output */
 static struct list_head sclp_con_outqueue;
-/* Counter how many buffers are emitted (max 1) and how many */
-/* are on the output queue. */
-static int sclp_con_buffer_count;
 /* Pointer to current console buffer */
 static struct sclp_buffer *sclp_conbuf;
 /* Timer for delayed output of console messages */
 static struct timer_list sclp_con_timer;
+/* Suspend mode flag */
+static int sclp_con_suspended;
+/* Flag that output queue is currently running */
+static int sclp_con_queue_running;
 
 /* Output format for console messages */
 static unsigned short sclp_con_columns;
@@ -53,42 +52,71 @@ sclp_conbuf_callback(struct sclp_buffer *buffer, int rc)
 	do {
 		page = sclp_unmake_buffer(buffer);
 		spin_lock_irqsave(&sclp_con_lock, flags);
+
 		/* Remove buffer from outqueue */
 		list_del(&buffer->list);
-		sclp_con_buffer_count--;
 		list_add_tail((struct list_head *) page, &sclp_con_pages);
+
 		/* Check if there is a pending buffer on the out queue. */
 		buffer = NULL;
 		if (!list_empty(&sclp_con_outqueue))
-			buffer = list_entry(sclp_con_outqueue.next,
-					    struct sclp_buffer, list);
+			buffer = list_first_entry(&sclp_con_outqueue,
+						  struct sclp_buffer, list);
+		if (!buffer || sclp_con_suspended) {
+			sclp_con_queue_running = 0;
+			spin_unlock_irqrestore(&sclp_con_lock, flags);
+			break;
+		}
 		spin_unlock_irqrestore(&sclp_con_lock, flags);
-	} while (buffer && sclp_emit_buffer(buffer, sclp_conbuf_callback));
+	} while (sclp_emit_buffer(buffer, sclp_conbuf_callback));
 }
 
-static void
-sclp_conbuf_emit(void)
+/*
+ * Finalize and emit first pending buffer.
+ */
+static void sclp_conbuf_emit(void)
 {
 	struct sclp_buffer* buffer;
 	unsigned long flags;
-	int count;
 	int rc;
 
 	spin_lock_irqsave(&sclp_con_lock, flags);
-	buffer = sclp_conbuf;
+	if (sclp_conbuf)
+		list_add_tail(&sclp_conbuf->list, &sclp_con_outqueue);
 	sclp_conbuf = NULL;
-	if (buffer == NULL) {
-		spin_unlock_irqrestore(&sclp_con_lock, flags);
-		return;
-	}
-	list_add_tail(&buffer->list, &sclp_con_outqueue);
-	count = sclp_con_buffer_count++;
+	if (sclp_con_queue_running || sclp_con_suspended)
+		goto out_unlock;
+	if (list_empty(&sclp_con_outqueue))
+		goto out_unlock;
+	buffer = list_first_entry(&sclp_con_outqueue, struct sclp_buffer,
+				  list);
+	sclp_con_queue_running = 1;
 	spin_unlock_irqrestore(&sclp_con_lock, flags);
-	if (count)
-		return;
+
 	rc = sclp_emit_buffer(buffer, sclp_conbuf_callback);
 	if (rc)
 		sclp_conbuf_callback(buffer, rc);
+	return;
+out_unlock:
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
+}
+
+/*
+ * Wait until out queue is empty
+ */
+static void sclp_console_sync_queue(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	if (timer_pending(&sclp_con_timer))
+		del_timer_sync(&sclp_con_timer);
+	while (sclp_con_queue_running) {
+		spin_unlock_irqrestore(&sclp_con_lock, flags);
+		sclp_sync_wait();
+		spin_lock_irqsave(&sclp_con_lock, flags);
+	}
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
 }
 
 /*
@@ -123,6 +151,8 @@ sclp_console_write(struct console *console, const char *message,
 		/* make sure we have a console output buffer */
 		if (sclp_conbuf == NULL) {
 			while (list_empty(&sclp_con_pages)) {
+				if (sclp_con_suspended)
+					goto out;
 				spin_unlock_irqrestore(&sclp_con_lock, flags);
 				sclp_sync_wait();
 				spin_lock_irqsave(&sclp_con_lock, flags);
@@ -157,6 +187,7 @@ sclp_console_write(struct console *console, const char *message,
 		sclp_con_timer.expires = jiffies + HZ/10;
 		add_timer(&sclp_con_timer);
 	}
+out:
 	spin_unlock_irqrestore(&sclp_con_lock, flags);
 }
 
@@ -168,30 +199,43 @@ sclp_console_device(struct console *c, int *index)
 }
 
 /*
- * This routine is called from panic when the kernel
- * is going to give up. We have to make sure that all buffers
- * will be flushed to the SCLP.
+ * Make sure that all buffers will be flushed to the SCLP.
  */
 static void
 sclp_console_flush(void)
 {
+	sclp_conbuf_emit();
+	sclp_console_sync_queue();
+}
+
+/*
+ * Resume console: If there are cached messages, emit them.
+ */
+static void sclp_console_resume(void)
+{
 	unsigned long flags;
 
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	sclp_con_suspended = 0;
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
 	sclp_conbuf_emit();
+}
+
+/*
+ * Suspend console: Set suspend flag and flush console
+ */
+static void sclp_console_suspend(void)
+{
+	unsigned long flags;
+
 	spin_lock_irqsave(&sclp_con_lock, flags);
-	if (timer_pending(&sclp_con_timer))
-		del_timer(&sclp_con_timer);
-	while (sclp_con_buffer_count > 0) {
-		spin_unlock_irqrestore(&sclp_con_lock, flags);
-		sclp_sync_wait();
-		spin_lock_irqsave(&sclp_con_lock, flags);
-	}
+	sclp_con_suspended = 1;
 	spin_unlock_irqrestore(&sclp_con_lock, flags);
+	sclp_console_flush();
 }
 
-static int
-sclp_console_notify(struct notifier_block *self,
-			  unsigned long event, void *data)
+static int sclp_console_notify(struct notifier_block *self,
+			       unsigned long event, void *data)
 {
 	sclp_console_flush();
 	return NOTIFY_OK;
@@ -199,7 +243,7 @@ sclp_console_notify(struct notifier_block *self,
 
 static struct notifier_block on_panic_nb = {
 	.notifier_call = sclp_console_notify,
-	.priority = 1,
+	.priority = SCLP_PANIC_PRIO_CLIENT,
 };
 
 static struct notifier_block on_reboot_nb = {
@@ -221,6 +265,22 @@ static struct console sclp_console =
 };
 
 /*
+ * This function is called for SCLP suspend and resume events.
+ */
+void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event)
+{
+	switch (sclp_pm_event) {
+	case SCLP_PM_EVENT_FREEZE:
+		sclp_console_suspend();
+		break;
+	case SCLP_PM_EVENT_RESTORE:
+	case SCLP_PM_EVENT_THAW:
+		sclp_console_resume();
+		break;
+	}
+}
+
+/*
  * called by console_init() in drivers/char/tty_io.c at boot-time.
  */
 static int __init
@@ -243,7 +303,6 @@ sclp_console_init(void)
 	}
 	INIT_LIST_HEAD(&sclp_con_outqueue);
 	spin_lock_init(&sclp_con_lock);
-	sclp_con_buffer_count = 0;
 	sclp_conbuf = NULL;
 	init_timer(&sclp_con_timer);
 
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
index 710af42603f..4be63be7344 100644
--- a/drivers/s390/char/sclp_rw.c
+++ b/drivers/s390/char/sclp_rw.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/sclp_rw.c
- *     driver: reading from and writing to system console on S/390 via SCLP
+ * driver: reading from and writing to system console on S/390 via SCLP
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corp. 1999, 2009
+ *
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/kmod.h>
@@ -26,9 +25,16 @@
  */
 #define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
 
+static void sclp_rw_pm_event(struct sclp_register *reg,
+			     enum sclp_pm_event sclp_pm_event)
+{
+	sclp_console_pm_event(sclp_pm_event);
+}
+
 /* Event type structure for write message and write priority message */
 static struct sclp_register sclp_rw_event = {
-	.send_mask = EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK
+	.send_mask = EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK,
+	.pm_event_fn = sclp_rw_pm_event,
 };
 
 /*
diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h
index 6aa7a6948bc..85f491ea929 100644
--- a/drivers/s390/char/sclp_rw.h
+++ b/drivers/s390/char/sclp_rw.h
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/sclp_rw.h
- *    interface to the SCLP-read/write driver
+ * interface to the SCLP-read/write driver
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corporation 1999, 2009
+ *
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __SCLP_RW_H__
@@ -93,4 +92,5 @@ void sclp_set_columns(struct sclp_buffer *, unsigned short);
 void sclp_set_htab(struct sclp_buffer *, unsigned short);
 int sclp_chars_in_buffer(struct sclp_buffer *);
 
+void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event);
 #endif	/* __SCLP_RW_H__ */
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index a839aa531d7..5518e24946a 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -1,10 +1,9 @@
 /*
- *  drivers/s390/char/sclp_vt220.c
- *    SCLP VT220 terminal driver.
+ * SCLP VT220 terminal driver.
  *
- *  S390 version
- *    Copyright IBM Corp. 2003,2008
- *    Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>
+ * Copyright IBM Corp. 2003, 2009
+ *
+ * Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>
  */
 
 #include <linux/module.h>
@@ -69,8 +68,11 @@ static struct list_head sclp_vt220_empty;
 /* List of pending requests */
 static struct list_head sclp_vt220_outqueue;
 
-/* Number of requests in outqueue */
-static int sclp_vt220_outqueue_count;
+/* Suspend mode flag */
+static int sclp_vt220_suspended;
+
+/* Flag that output queue is currently running */
+static int sclp_vt220_queue_running;
 
 /* Timer used for delaying write requests to merge subsequent messages into
  * a single buffer */
@@ -92,6 +94,8 @@ static int __initdata sclp_vt220_init_count;
 static int sclp_vt220_flush_later;
 
 static void sclp_vt220_receiver_fn(struct evbuf_header *evbuf);
+static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
+				   enum sclp_pm_event sclp_pm_event);
 static int __sclp_vt220_emit(struct sclp_vt220_request *request);
 static void sclp_vt220_emit_current(void);
 
@@ -100,7 +104,8 @@ static struct sclp_register sclp_vt220_register = {
 	.send_mask		= EVTYP_VT220MSG_MASK,
 	.receive_mask		= EVTYP_VT220MSG_MASK,
 	.state_change_fn	= NULL,
-	.receiver_fn		= sclp_vt220_receiver_fn
+	.receiver_fn		= sclp_vt220_receiver_fn,
+	.pm_event_fn		= sclp_vt220_pm_event_fn,
 };
 
 
@@ -120,15 +125,19 @@ sclp_vt220_process_queue(struct sclp_vt220_request *request)
 		spin_lock_irqsave(&sclp_vt220_lock, flags);
 		/* Move request from outqueue to empty queue */
 		list_del(&request->list);
-		sclp_vt220_outqueue_count--;
 		list_add_tail((struct list_head *) page, &sclp_vt220_empty);
 		/* Check if there is a pending buffer on the out queue. */
 		request = NULL;
 		if (!list_empty(&sclp_vt220_outqueue))
 			request = list_entry(sclp_vt220_outqueue.next,
 					     struct sclp_vt220_request, list);
+		if (!request || sclp_vt220_suspended) {
+			sclp_vt220_queue_running = 0;
+			spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+			break;
+		}
 		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-	} while (request && __sclp_vt220_emit(request));
+	} while (__sclp_vt220_emit(request));
 	if (request == NULL && sclp_vt220_flush_later)
 		sclp_vt220_emit_current();
 	/* Check if the tty needs a wake up call */
@@ -212,26 +221,7 @@ __sclp_vt220_emit(struct sclp_vt220_request *request)
 }
 
 /*
- * Queue and emit given request.
- */
-static void
-sclp_vt220_emit(struct sclp_vt220_request *request)
-{
-	unsigned long flags;
-	int count;
-
-	spin_lock_irqsave(&sclp_vt220_lock, flags);
-	list_add_tail(&request->list, &sclp_vt220_outqueue);
-	count = sclp_vt220_outqueue_count++;
-	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-	/* Emit only the first buffer immediately - callback takes care of
-	 * the rest */
-	if (count == 0 && __sclp_vt220_emit(request))
-		sclp_vt220_process_queue(request);
-}
-
-/*
- * Queue and emit current request. Return zero on success, non-zero otherwise.
+ * Queue and emit current request.
  */
 static void
 sclp_vt220_emit_current(void)
@@ -241,22 +231,33 @@ sclp_vt220_emit_current(void)
 	struct sclp_vt220_sccb *sccb;
 
 	spin_lock_irqsave(&sclp_vt220_lock, flags);
-	request = NULL;
-	if (sclp_vt220_current_request != NULL) {
+	if (sclp_vt220_current_request) {
 		sccb = (struct sclp_vt220_sccb *) 
 				sclp_vt220_current_request->sclp_req.sccb;
 		/* Only emit buffers with content */
 		if (sccb->header.length != sizeof(struct sclp_vt220_sccb)) {
-			request = sclp_vt220_current_request;
+			list_add_tail(&sclp_vt220_current_request->list,
+				      &sclp_vt220_outqueue);
 			sclp_vt220_current_request = NULL;
 			if (timer_pending(&sclp_vt220_timer))
 				del_timer(&sclp_vt220_timer);
 		}
 		sclp_vt220_flush_later = 0;
 	}
+	if (sclp_vt220_queue_running || sclp_vt220_suspended)
+		goto out_unlock;
+	if (list_empty(&sclp_vt220_outqueue))
+		goto out_unlock;
+	request = list_first_entry(&sclp_vt220_outqueue,
+				   struct sclp_vt220_request, list);
+	sclp_vt220_queue_running = 1;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+
+	if (__sclp_vt220_emit(request))
+		sclp_vt220_process_queue(request);
+	return;
+out_unlock:
 	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-	if (request != NULL)
-		sclp_vt220_emit(request);
 }
 
 #define SCLP_NORMAL_WRITE	0x00
@@ -396,7 +397,7 @@ __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
 		if (sclp_vt220_current_request == NULL) {
 			while (list_empty(&sclp_vt220_empty)) {
 				spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-				if (may_fail)
+				if (may_fail || sclp_vt220_suspended)
 					goto out;
 				else
 					sclp_sync_wait();
@@ -531,7 +532,7 @@ sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
 static void
 sclp_vt220_flush_chars(struct tty_struct *tty)
 {
-	if (sclp_vt220_outqueue_count == 0)
+	if (!sclp_vt220_queue_running)
 		sclp_vt220_emit_current();
 	else
 		sclp_vt220_flush_later = 1;
@@ -635,7 +636,6 @@ static int __init __sclp_vt220_init(int num_pages)
 	init_timer(&sclp_vt220_timer);
 	sclp_vt220_current_request = NULL;
 	sclp_vt220_buffered_chars = 0;
-	sclp_vt220_outqueue_count = 0;
 	sclp_vt220_tty = NULL;
 	sclp_vt220_flush_later = 0;
 
@@ -736,7 +736,7 @@ static void __sclp_vt220_flush_buffer(void)
 	spin_lock_irqsave(&sclp_vt220_lock, flags);
 	if (timer_pending(&sclp_vt220_timer))
 		del_timer(&sclp_vt220_timer);
-	while (sclp_vt220_outqueue_count > 0) {
+	while (sclp_vt220_queue_running) {
 		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
 		sclp_sync_wait();
 		spin_lock_irqsave(&sclp_vt220_lock, flags);
@@ -744,6 +744,46 @@ static void __sclp_vt220_flush_buffer(void)
 	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
 }
 
+/*
+ * Resume console: If there are cached messages, emit them.
+ */
+static void sclp_vt220_resume(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	sclp_vt220_suspended = 0;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	sclp_vt220_emit_current();
+}
+
+/*
+ * Suspend console: Set suspend flag and flush console
+ */
+static void sclp_vt220_suspend(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	sclp_vt220_suspended = 1;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	__sclp_vt220_flush_buffer();
+}
+
+static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
+				   enum sclp_pm_event sclp_pm_event)
+{
+	switch (sclp_pm_event) {
+	case SCLP_PM_EVENT_FREEZE:
+		sclp_vt220_suspend();
+		break;
+	case SCLP_PM_EVENT_RESTORE:
+	case SCLP_PM_EVENT_THAW:
+		sclp_vt220_resume();
+		break;
+	}
+}
+
 static int
 sclp_vt220_notify(struct notifier_block *self,
 			  unsigned long event, void *data)
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index 5469e099597..a2633377470 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -3,7 +3,7 @@
  *    tape device driver for 3480/3490E/3590 tapes.
  *
  *  S390 and zSeries version
- *    Copyright IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -286,6 +286,7 @@ extern void tape_state_set(struct tape_device *, enum tape_state);
 
 extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
 extern int tape_generic_offline(struct ccw_device *);
+extern int tape_generic_pm_suspend(struct ccw_device *);
 
 /* Externals from tape_devmap.c */
 extern int tape_generic_probe(struct ccw_device *);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 2d00a383a47..144d2a5e1a9 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -2,7 +2,7 @@
  *  drivers/s390/char/tape_34xx.c
  *    tape device discipline for 3480/3490 tapes.
  *
- *    Copyright (C) IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -1302,6 +1302,7 @@ static struct ccw_driver tape_34xx_driver = {
 	.remove = tape_generic_remove,
 	.set_online = tape_34xx_online,
 	.set_offline = tape_generic_offline,
+	.freeze = tape_generic_pm_suspend,
 };
 
 static int
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index c453b2f3e9f..23e6598bc4b 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -2,7 +2,7 @@
  *  drivers/s390/char/tape_3590.c
  *    tape device discipline for 3590 tapes.
  *
- *    Copyright IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Stefan Bader <shbader@de.ibm.com>
  *		 Michael Holzheu <holzheu@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -1715,6 +1715,7 @@ static struct ccw_driver tape_3590_driver = {
 	.remove = tape_generic_remove,
 	.set_offline = tape_generic_offline,
 	.set_online = tape_3590_online,
+	.freeze = tape_generic_pm_suspend,
 };
 
 /*
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 8a109f3b69c..3ebaa8eb5c8 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -3,7 +3,7 @@
  *    basic function of the tape device driver
  *
  *  S390 and zSeries version
- *    Copyright IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *		 Michael Holzheu <holzheu@de.ibm.com>
  *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
@@ -380,6 +380,55 @@ tape_cleanup_device(struct tape_device *device)
 }
 
 /*
+ * Suspend device.
+ *
+ * Called by the common I/O layer if the drive should be suspended on user
+ * request. We refuse to suspend if the device is loaded or in use for the
+ * following reason:
+ * While the Linux guest is suspended, it might be logged off which causes
+ * devices to be detached. Tape devices are automatically rewound and unloaded
+ * during DETACH processing (unless the tape device was attached with the
+ * NOASSIGN or MULTIUSER option). After rewind/unload, there is no way to
+ * resume the original state of the tape device, since we would need to
+ * manually re-load the cartridge which was active at suspend time.
+ */
+int tape_generic_pm_suspend(struct ccw_device *cdev)
+{
+	struct tape_device *device;
+
+	device = cdev->dev.driver_data;
+	if (!device) {
+		return -ENODEV;
+	}
+
+	DBF_LH(3, "(%08x): tape_generic_pm_suspend(%p)\n",
+		device->cdev_id, device);
+
+	if (device->medium_state != MS_UNLOADED) {
+		pr_err("A cartridge is loaded in tape device %s, "
+		       "refusing to suspend\n", dev_name(&cdev->dev));
+		return -EBUSY;
+	}
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	switch (device->tape_state) {
+		case TS_INIT:
+		case TS_NOT_OPER:
+		case TS_UNUSED:
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			break;
+		default:
+			pr_err("Tape device %s is busy, refusing to "
+			       "suspend\n", dev_name(&cdev->dev));
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			return -EBUSY;
+	}
+
+	DBF_LH(3, "(%08x): Drive suspended.\n", device->cdev_id);
+	return 0;
+}
+
+/*
  * Set device offline.
  *
  * Called by the common I/O layer if the drive should set offline on user
@@ -1273,6 +1322,7 @@ EXPORT_SYMBOL(tape_generic_remove);
 EXPORT_SYMBOL(tape_generic_probe);
 EXPORT_SYMBOL(tape_generic_online);
 EXPORT_SYMBOL(tape_generic_offline);
+EXPORT_SYMBOL(tape_generic_pm_suspend);
 EXPORT_SYMBOL(tape_put_device);
 EXPORT_SYMBOL(tape_get_device_reference);
 EXPORT_SYMBOL(tape_state_verbose);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index a7fe6302c98..38385677c65 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -112,7 +112,7 @@ struct tty3270 {
 #define TTY_UPDATE_LIST		2	/* Update lines in tty3270->update. */
 #define TTY_UPDATE_INPUT	4	/* Update input line. */
 #define TTY_UPDATE_STATUS	8	/* Update status line. */
-#define TTY_UPDATE_ALL		15
+#define TTY_UPDATE_ALL		16	/* Recreate screen. */
 
 static void tty3270_update(struct tty3270 *);
 
@@ -121,19 +121,10 @@ static void tty3270_update(struct tty3270 *);
  */
 static void tty3270_set_timer(struct tty3270 *tp, int expires)
 {
-	if (expires == 0) {
-		if (timer_pending(&tp->timer) && del_timer(&tp->timer))
-			raw3270_put_view(&tp->view);
-		return;
-	}
-	if (timer_pending(&tp->timer) &&
-	    mod_timer(&tp->timer, jiffies + expires))
-		return;
-	raw3270_get_view(&tp->view);
-	tp->timer.function = (void (*)(unsigned long)) tty3270_update;
-	tp->timer.data = (unsigned long) tp;
-	tp->timer.expires = jiffies + expires;
-	add_timer(&tp->timer);
+	if (expires == 0)
+		del_timer(&tp->timer);
+	else
+		mod_timer(&tp->timer, jiffies + expires);
 }
 
 /*
@@ -337,7 +328,6 @@ tty3270_write_callback(struct raw3270_request *rq, void *data)
 	tp = (struct tty3270 *) rq->view;
 	if (rq->rc != 0) {
 		/* Write wasn't successfull. Refresh all. */
-		tty3270_rebuild_update(tp);
 		tp->update_flags = TTY_UPDATE_ALL;
 		tty3270_set_timer(tp, 1);
 	}
@@ -366,6 +356,12 @@ tty3270_update(struct tty3270 *tp)
 
 	spin_lock(&tp->view.lock);
 	updated = 0;
+	if (tp->update_flags & TTY_UPDATE_ALL) {
+		tty3270_rebuild_update(tp);
+		tty3270_update_status(tp);
+		tp->update_flags = TTY_UPDATE_ERASE | TTY_UPDATE_LIST |
+			TTY_UPDATE_INPUT | TTY_UPDATE_STATUS;
+	}
 	if (tp->update_flags & TTY_UPDATE_ERASE) {
 		/* Use erase write alternate to erase display. */
 		raw3270_request_set_cmd(wrq, TC_EWRITEA);
@@ -425,7 +421,6 @@ tty3270_update(struct tty3270 *tp)
 		xchg(&tp->write, wrq);
 	}
 	spin_unlock(&tp->view.lock);
-	raw3270_put_view(&tp->view);
 }
 
 /*
@@ -570,7 +565,6 @@ tty3270_read_tasklet(struct raw3270_request *rrq)
 		tty3270_set_timer(tp, 1);
 	} else if (tp->input->string[0] == 0x6d) {
 		/* Display has been cleared. Redraw. */
-		tty3270_rebuild_update(tp);
 		tp->update_flags = TTY_UPDATE_ALL;
 		tty3270_set_timer(tp, 1);
 	}
@@ -641,22 +635,20 @@ static int
 tty3270_activate(struct raw3270_view *view)
 {
 	struct tty3270 *tp;
-	unsigned long flags;
 
 	tp = (struct tty3270 *) view;
-	spin_lock_irqsave(&tp->view.lock, flags);
-	tp->nr_up = 0;
-	tty3270_rebuild_update(tp);
-	tty3270_update_status(tp);
 	tp->update_flags = TTY_UPDATE_ALL;
 	tty3270_set_timer(tp, 1);
-	spin_unlock_irqrestore(&tp->view.lock, flags);
 	return 0;
 }
 
 static void
 tty3270_deactivate(struct raw3270_view *view)
 {
+	struct tty3270 *tp;
+
+	tp = (struct tty3270 *) view;
+	del_timer(&tp->timer);
 }
 
 static int
@@ -743,6 +735,7 @@ tty3270_free_view(struct tty3270 *tp)
 {
 	int pages;
 
+	del_timer_sync(&tp->timer);
 	kbd_free(tp->kbd);
 	raw3270_request_free(tp->kreset);
 	raw3270_request_free(tp->read);
@@ -889,7 +882,8 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 	INIT_LIST_HEAD(&tp->update);
 	INIT_LIST_HEAD(&tp->rcl_lines);
 	tp->rcl_max = 20;
-	init_timer(&tp->timer);
+	setup_timer(&tp->timer, (void (*)(unsigned long)) tty3270_update,
+		    (unsigned long) tp);
 	tasklet_init(&tp->readlet, 
 		     (void (*)(unsigned long)) tty3270_read_tasklet,
 		     (unsigned long) tp->read);
@@ -1754,14 +1748,6 @@ static const struct tty_operations tty3270_ops = {
 	.set_termios = tty3270_set_termios
 };
 
-static void tty3270_notifier(int index, int active)
-{
-	if (active)
-		tty_register_device(tty3270_driver, index, NULL);
-	else
-		tty_unregister_device(tty3270_driver, index);
-}
-
 /*
  * 3270 tty registration code called from tty_init().
  * Most kernel services (incl. kmalloc) are available at this poimt.
@@ -1796,12 +1782,6 @@ static int __init tty3270_init(void)
 		return ret;
 	}
 	tty3270_driver = driver;
-	ret = raw3270_register_notifier(tty3270_notifier);
-	if (ret) {
-		put_tty_driver(driver);
-		return ret;
-
-	}
 	return 0;
 }
 
@@ -1810,7 +1790,6 @@ tty3270_exit(void)
 {
 	struct tty_driver *driver;
 
-	raw3270_unregister_notifier(tty3270_notifier);
 	driver = tty3270_driver;
 	tty3270_driver = NULL;
 	tty_unregister_driver(driver);
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index d8a2289fcb6..e925808c214 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -3,7 +3,7 @@
  *	character device driver for reading z/VM system service records
  *
  *
- *	Copyright 2004 IBM Corporation
+ *	Copyright IBM Corp. 2004, 2009
  *	character device driver for reading z/VM system service records,
  *	Version 1.0
  *	Author(s): Xenia Tkatschow <xenia@us.ibm.com>
@@ -660,6 +660,29 @@ static struct attribute *vmlogrdr_attrs[] = {
 	NULL,
 };
 
+static int vmlogrdr_pm_prepare(struct device *dev)
+{
+	int rc;
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+
+	rc = 0;
+	if (priv) {
+		spin_lock_bh(&priv->priv_lock);
+		if (priv->dev_in_use)
+			rc = -EBUSY;
+		spin_unlock_bh(&priv->priv_lock);
+	}
+	if (rc)
+		pr_err("vmlogrdr: device %s is busy. Refuse to suspend.\n",
+		       dev_name(dev));
+	return rc;
+}
+
+
+static struct dev_pm_ops vmlogrdr_pm_ops = {
+	.prepare = vmlogrdr_pm_prepare,
+};
+
 static struct attribute_group vmlogrdr_attr_group = {
 	.attrs = vmlogrdr_attrs,
 };
@@ -668,6 +691,7 @@ static struct class *vmlogrdr_class;
 static struct device_driver vmlogrdr_driver = {
 	.name = "vmlogrdr",
 	.bus  = &iucv_bus,
+	.pm = &vmlogrdr_pm_ops,
 };
 
 
@@ -729,6 +753,7 @@ static int vmlogrdr_register_device(struct vmlogrdr_priv_t *priv)
 		dev->bus = &iucv_bus;
 		dev->parent = iucv_root;
 		dev->driver = &vmlogrdr_driver;
+		dev->driver_data = priv;
 		/*
 		 * The release function could be called after the
 		 * module has been unloaded. It's _only_ task is to
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 5dcef81fc9d..92458219a9e 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -2,7 +2,7 @@
  * Linux driver for System z and s390 unit record devices
  * (z/VM virtual punch, reader, printer)
  *
- * Copyright IBM Corp. 2001, 2007
+ * Copyright IBM Corp. 2001, 2009
  * Authors: Malcolm Beattie <beattiem@uk.ibm.com>
  *	    Michael Holzheu <holzheu@de.ibm.com>
  *	    Frank Munzert <munzert@de.ibm.com>
@@ -60,6 +60,7 @@ static int ur_probe(struct ccw_device *cdev);
 static void ur_remove(struct ccw_device *cdev);
 static int ur_set_online(struct ccw_device *cdev);
 static int ur_set_offline(struct ccw_device *cdev);
+static int ur_pm_suspend(struct ccw_device *cdev);
 
 static struct ccw_driver ur_driver = {
 	.name		= "vmur",
@@ -69,6 +70,7 @@ static struct ccw_driver ur_driver = {
 	.remove		= ur_remove,
 	.set_online	= ur_set_online,
 	.set_offline	= ur_set_offline,
+	.freeze		= ur_pm_suspend,
 };
 
 static DEFINE_MUTEX(vmur_mutex);
@@ -158,6 +160,28 @@ static void urdev_put(struct urdev *urd)
 }
 
 /*
+ * State and contents of ur devices can be changed by class D users issuing
+ * CP commands such as PURGE or TRANSFER, while the Linux guest is suspended.
+ * Also the Linux guest might be logged off, which causes all active spool
+ * files to be closed.
+ * So we cannot guarantee that spool files are still the same when the Linux
+ * guest is resumed. In order to avoid unpredictable results at resume time
+ * we simply refuse to suspend if a ur device node is open.
+ */
+static int ur_pm_suspend(struct ccw_device *cdev)
+{
+	struct urdev *urd = cdev->dev.driver_data;
+
+	TRACE("ur_pm_suspend: cdev=%p\n", cdev);
+	if (urd->open_flag) {
+		pr_err("Unit record device %s is busy, %s refusing to "
+		       "suspend.\n", dev_name(&cdev->dev), ur_banner);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+/*
  * Low-level functions to do I/O to a ur device.
  *     alloc_chan_prog
  *     free_chan_prog
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index 21a2a829bf4..cb7854c10c0 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -1,17 +1,23 @@
 /*
  * Watchdog implementation based on z/VM Watchdog Timer API
  *
+ * Copyright IBM Corp. 2004,2009
+ *
  * The user space watchdog daemon can use this driver as
  * /dev/vmwatchdog to have z/VM execute the specified CP
  * command when the timeout expires. The default command is
  * "IPL", which which cause an immediate reboot.
  */
+#define KMSG_COMPONENT "vmwatchdog"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/suspend.h>
 #include <linux/watchdog.h>
 #include <linux/smp_lock.h>
 
@@ -43,6 +49,9 @@ static unsigned int vmwdt_interval = 60;
 static unsigned long vmwdt_is_open;
 static int vmwdt_expect_close;
 
+#define VMWDT_OPEN	0	/* devnode is open or suspend in progress */
+#define VMWDT_RUNNING	1	/* The watchdog is armed */
+
 enum vmwdt_func {
 	/* function codes */
 	wdt_init   = 0,
@@ -92,6 +101,7 @@ static int vmwdt_keepalive(void)
 	EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
 
 	func = vmwdt_conceal ? (wdt_init | wdt_conceal) : wdt_init;
+	set_bit(VMWDT_RUNNING, &vmwdt_is_open);
 	ret = __diag288(func, vmwdt_interval, ebc_cmd, len);
 	WARN_ON(ret != 0);
 	kfree(ebc_cmd);
@@ -102,6 +112,7 @@ static int vmwdt_disable(void)
 {
 	int ret = __diag288(wdt_cancel, 0, "", 0);
 	WARN_ON(ret != 0);
+	clear_bit(VMWDT_RUNNING, &vmwdt_is_open);
 	return ret;
 }
 
@@ -123,13 +134,13 @@ static int vmwdt_open(struct inode *i, struct file *f)
 {
 	int ret;
 	lock_kernel();
-	if (test_and_set_bit(0, &vmwdt_is_open)) {
+	if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
 		unlock_kernel();
 		return -EBUSY;
 	}
 	ret = vmwdt_keepalive();
 	if (ret)
-		clear_bit(0, &vmwdt_is_open);
+		clear_bit(VMWDT_OPEN, &vmwdt_is_open);
 	unlock_kernel();
 	return ret ? ret : nonseekable_open(i, f);
 }
@@ -139,7 +150,7 @@ static int vmwdt_close(struct inode *i, struct file *f)
 	if (vmwdt_expect_close == 42)
 		vmwdt_disable();
 	vmwdt_expect_close = 0;
-	clear_bit(0, &vmwdt_is_open);
+	clear_bit(VMWDT_OPEN, &vmwdt_is_open);
 	return 0;
 }
 
@@ -223,6 +234,57 @@ static ssize_t vmwdt_write(struct file *f, const char __user *buf,
 	return count;
 }
 
+static int vmwdt_resume(void)
+{
+	clear_bit(VMWDT_OPEN, &vmwdt_is_open);
+	return NOTIFY_DONE;
+}
+
+/*
+ * It makes no sense to go into suspend while the watchdog is running.
+ * Depending on the memory size, the watchdog might trigger, while we
+ * are still saving the memory.
+ * We reuse the open flag to ensure that suspend and watchdog open are
+ * exclusive operations
+ */
+static int vmwdt_suspend(void)
+{
+	if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
+		pr_err("The watchdog is in use. "
+			"This prevents hibernation or suspend.\n");
+		return NOTIFY_BAD;
+	}
+	if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) {
+		clear_bit(VMWDT_OPEN, &vmwdt_is_open);
+		pr_err("The watchdog is running. "
+			"This prevents hibernation or suspend.\n");
+		return NOTIFY_BAD;
+	}
+	return NOTIFY_DONE;
+}
+
+/*
+ * This function is called for suspend and resume.
+ */
+static int vmwdt_power_event(struct notifier_block *this, unsigned long event,
+			     void *ptr)
+{
+	switch (event) {
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		return vmwdt_resume();
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		return vmwdt_suspend();
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block vmwdt_power_notifier = {
+	.notifier_call = vmwdt_power_event,
+};
+
 static const struct file_operations vmwdt_fops = {
 	.open    = &vmwdt_open,
 	.release = &vmwdt_close,
@@ -244,12 +306,21 @@ static int __init vmwdt_init(void)
 	ret = vmwdt_probe();
 	if (ret)
 		return ret;
-	return misc_register(&vmwdt_dev);
+	ret = register_pm_notifier(&vmwdt_power_notifier);
+	if (ret)
+		return ret;
+	ret = misc_register(&vmwdt_dev);
+	if (ret) {
+		unregister_pm_notifier(&vmwdt_power_notifier);
+		return ret;
+	}
+	return 0;
 }
 module_init(vmwdt_init);
 
 static void __exit vmwdt_exit(void)
 {
-	WARN_ON(misc_deregister(&vmwdt_dev) != 0);
+	unregister_pm_notifier(&vmwdt_power_notifier);
+	misc_deregister(&vmwdt_dev);
 }
 module_exit(vmwdt_exit);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 22ce765d537..a5a62f1f774 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/cio/ccwgroup.c
  *  bus driver for ccwgroup
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
- *                       IBM Corporation
- *    Author(s): Arnd Bergmann (arndb@de.ibm.com)
- *               Cornelia Huck (cornelia.huck@de.ibm.com)
+ *  Copyright IBM Corp. 2002, 2009
+ *
+ *  Author(s): Arnd Bergmann (arndb@de.ibm.com)
+ *	       Cornelia Huck (cornelia.huck@de.ibm.com)
  */
 #include <linux/module.h>
 #include <linux/errno.h>
@@ -501,6 +500,74 @@ static void ccwgroup_shutdown(struct device *dev)
 		gdrv->shutdown(gdev);
 }
 
+static int ccwgroup_pm_prepare(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	/* Fail while device is being set online/offline. */
+	if (atomic_read(&gdev->onoff))
+		return -EAGAIN;
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->prepare ? gdrv->prepare(gdev) : 0;
+}
+
+static void ccwgroup_pm_complete(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return;
+
+	if (gdrv->complete)
+		gdrv->complete(gdev);
+}
+
+static int ccwgroup_pm_freeze(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->freeze ? gdrv->freeze(gdev) : 0;
+}
+
+static int ccwgroup_pm_thaw(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->thaw ? gdrv->thaw(gdev) : 0;
+}
+
+static int ccwgroup_pm_restore(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->restore ? gdrv->restore(gdev) : 0;
+}
+
+static struct dev_pm_ops ccwgroup_pm_ops = {
+	.prepare = ccwgroup_pm_prepare,
+	.complete = ccwgroup_pm_complete,
+	.freeze = ccwgroup_pm_freeze,
+	.thaw = ccwgroup_pm_thaw,
+	.restore = ccwgroup_pm_restore,
+};
+
 static struct bus_type ccwgroup_bus_type = {
 	.name   = "ccwgroup",
 	.match  = ccwgroup_bus_match,
@@ -508,6 +575,7 @@ static struct bus_type ccwgroup_bus_type = {
 	.probe  = ccwgroup_probe,
 	.remove = ccwgroup_remove,
 	.shutdown = ccwgroup_shutdown,
+	.pm = &ccwgroup_pm_ops,
 };
 
 
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 883f16f96f2..1ecd3e56764 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -549,8 +549,7 @@ cleanup:
 	return ret;
 }
 
-static int
-__chsc_do_secm(struct channel_subsystem *css, int enable, void *page)
+int __chsc_do_secm(struct channel_subsystem *css, int enable, void *page)
 {
 	struct {
 		struct chsc_header request;
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index ba59bceace9..425e8f89a6c 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -90,6 +90,7 @@ extern void chsc_free_sei_area(void);
 extern int chsc_enable_facility(int);
 struct channel_subsystem;
 extern int chsc_secm(struct channel_subsystem *, int);
+int __chsc_do_secm(struct channel_subsystem *css, int enable, void *page);
 
 int chsc_chp_vary(struct chp_id chpid, int on);
 int chsc_determine_channel_path_desc(struct chp_id chpid, int fmt, int rfmt,
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index 93eca1731b8..cc5144b6f9d 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -1,7 +1,8 @@
 /*
  * Driver for s390 chsc subchannels
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008, 2009
+ *
  * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
  *
  */
@@ -112,6 +113,31 @@ static void chsc_subchannel_shutdown(struct subchannel *sch)
 	cio_disable_subchannel(sch);
 }
 
+static int chsc_subchannel_prepare(struct subchannel *sch)
+{
+	int cc;
+	struct schib schib;
+	/*
+	 * Don't allow suspend while the subchannel is not idle
+	 * since we don't have a way to clear the subchannel and
+	 * cannot disable it with a request running.
+	 */
+	cc = stsch(sch->schid, &schib);
+	if (!cc && scsw_stctl(&schib.scsw))
+		return -EAGAIN;
+	return 0;
+}
+
+static int chsc_subchannel_freeze(struct subchannel *sch)
+{
+	return cio_disable_subchannel(sch);
+}
+
+static int chsc_subchannel_restore(struct subchannel *sch)
+{
+	return cio_enable_subchannel(sch, (u32)(unsigned long)sch);
+}
+
 static struct css_device_id chsc_subchannel_ids[] = {
 	{ .match_flags = 0x1, .type =SUBCHANNEL_TYPE_CHSC, },
 	{ /* end of list */ },
@@ -125,6 +151,10 @@ static struct css_driver chsc_subchannel_driver = {
 	.probe = chsc_subchannel_probe,
 	.remove = chsc_subchannel_remove,
 	.shutdown = chsc_subchannel_shutdown,
+	.prepare = chsc_subchannel_prepare,
+	.freeze = chsc_subchannel_freeze,
+	.thaw = chsc_subchannel_restore,
+	.restore = chsc_subchannel_restore,
 	.name = "chsc_subchannel",
 };
 
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 2aebb982304..5ec7789bd9d 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -12,6 +12,7 @@
 #define KMSG_COMPONENT "cio"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/ftrace.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -28,7 +29,7 @@
 #include <asm/chpid.h>
 #include <asm/airq.h>
 #include <asm/isc.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/fcx.h>
 #include <asm/nmi.h>
 #include <asm/crw.h>
@@ -626,8 +627,7 @@ out:
  *	    handlers).
  *
  */
-void
-do_IRQ (struct pt_regs *regs)
+void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct tpi_info *tpi_info;
 	struct subchannel *sch;
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index dc98b2c6386..30f51611130 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -1204,6 +1204,11 @@ static ssize_t cmb_enable_store(struct device *dev,
 
 DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store);
 
+int ccw_set_cmf(struct ccw_device *cdev, int enable)
+{
+	return cmbops->set(cdev, enable ? 2 : 0);
+}
+
 /**
  * enable_cmf() - switch on the channel measurement for a specific device
  *  @cdev:	The ccw device to be enabled
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 0085d890179..85d43c6bcb6 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -1,10 +1,10 @@
 /*
- *  drivers/s390/cio/css.c
- *  driver for channel subsystem
+ * driver for channel subsystem
  *
- *    Copyright IBM Corp. 2002,2008
- *    Author(s): Arnd Bergmann (arndb@de.ibm.com)
- *		 Cornelia Huck (cornelia.huck@de.ibm.com)
+ * Copyright IBM Corp. 2002, 2009
+ *
+ * Author(s): Arnd Bergmann (arndb@de.ibm.com)
+ *	      Cornelia Huck (cornelia.huck@de.ibm.com)
  */
 
 #define KMSG_COMPONENT "cio"
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/reboot.h>
+#include <linux/suspend.h>
 #include <asm/isc.h>
 #include <asm/crw.h>
 
@@ -780,6 +781,79 @@ static struct notifier_block css_reboot_notifier = {
 };
 
 /*
+ * Since the css devices are neither on a bus nor have a class
+ * nor have a special device type, we cannot stop/restart channel
+ * path measurements via the normal suspend/resume callbacks, but have
+ * to use notifiers.
+ */
+static int css_power_event(struct notifier_block *this, unsigned long event,
+			   void *ptr)
+{
+	void *secm_area;
+	int ret, i;
+
+	switch (event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		ret = NOTIFY_DONE;
+		for (i = 0; i <= __MAX_CSSID; i++) {
+			struct channel_subsystem *css;
+
+			css = channel_subsystems[i];
+			mutex_lock(&css->mutex);
+			if (!css->cm_enabled) {
+				mutex_unlock(&css->mutex);
+				continue;
+			}
+			secm_area = (void *)get_zeroed_page(GFP_KERNEL |
+							    GFP_DMA);
+			if (secm_area) {
+				if (__chsc_do_secm(css, 0, secm_area))
+					ret = NOTIFY_BAD;
+				free_page((unsigned long)secm_area);
+			} else
+				ret = NOTIFY_BAD;
+
+			mutex_unlock(&css->mutex);
+		}
+		break;
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		ret = NOTIFY_DONE;
+		for (i = 0; i <= __MAX_CSSID; i++) {
+			struct channel_subsystem *css;
+
+			css = channel_subsystems[i];
+			mutex_lock(&css->mutex);
+			if (!css->cm_enabled) {
+				mutex_unlock(&css->mutex);
+				continue;
+			}
+			secm_area = (void *)get_zeroed_page(GFP_KERNEL |
+							    GFP_DMA);
+			if (secm_area) {
+				if (__chsc_do_secm(css, 1, secm_area))
+					ret = NOTIFY_BAD;
+				free_page((unsigned long)secm_area);
+			} else
+				ret = NOTIFY_BAD;
+
+			mutex_unlock(&css->mutex);
+		}
+		/* search for subchannels, which appeared during hibernation */
+		css_schedule_reprobe();
+		break;
+	default:
+		ret = NOTIFY_DONE;
+	}
+	return ret;
+
+}
+static struct notifier_block css_power_notifier = {
+	.notifier_call = css_power_event,
+};
+
+/*
  * Now that the driver core is running, we can setup our channel subsystem.
  * The struct subchannel's are created during probing (except for the
  * static console subchannel).
@@ -852,6 +926,11 @@ init_channel_subsystem (void)
 	ret = register_reboot_notifier(&css_reboot_notifier);
 	if (ret)
 		goto out_unregister;
+	ret = register_pm_notifier(&css_power_notifier);
+	if (ret) {
+		unregister_reboot_notifier(&css_reboot_notifier);
+		goto out_unregister;
+	}
 	css_init_done = 1;
 
 	/* Enable default isc for I/O subchannels. */
@@ -953,6 +1032,73 @@ static int css_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return ret;
 }
 
+static int css_pm_prepare(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (mutex_is_locked(&sch->reg_mutex))
+		return -EAGAIN;
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	/* Notify drivers that they may not register children. */
+	return drv->prepare ? drv->prepare(sch) : 0;
+}
+
+static void css_pm_complete(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return;
+	drv = to_cssdriver(sch->dev.driver);
+	if (drv->complete)
+		drv->complete(sch);
+}
+
+static int css_pm_freeze(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	return drv->freeze ? drv->freeze(sch) : 0;
+}
+
+static int css_pm_thaw(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	return drv->thaw ? drv->thaw(sch) : 0;
+}
+
+static int css_pm_restore(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	return drv->restore ? drv->restore(sch) : 0;
+}
+
+static struct dev_pm_ops css_pm_ops = {
+	.prepare = css_pm_prepare,
+	.complete = css_pm_complete,
+	.freeze = css_pm_freeze,
+	.thaw = css_pm_thaw,
+	.restore = css_pm_restore,
+};
+
 struct bus_type css_bus_type = {
 	.name     = "css",
 	.match    = css_bus_match,
@@ -960,6 +1106,7 @@ struct bus_type css_bus_type = {
 	.remove   = css_remove,
 	.shutdown = css_shutdown,
 	.uevent   = css_uevent,
+	.pm = &css_pm_ops,
 };
 
 /**
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 57ebf120f82..9763eeec745 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -70,6 +70,11 @@ struct chp_link;
  * @probe: function called on probe
  * @remove: function called on remove
  * @shutdown: called at device shutdown
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @name: name of the device driver
  */
 struct css_driver {
@@ -82,6 +87,11 @@ struct css_driver {
 	int (*probe)(struct subchannel *);
 	int (*remove)(struct subchannel *);
 	void (*shutdown)(struct subchannel *);
+	int (*prepare) (struct subchannel *);
+	void (*complete) (struct subchannel *);
+	int (*freeze)(struct subchannel *);
+	int (*thaw) (struct subchannel *);
+	int (*restore)(struct subchannel *);
 	const char *name;
 };
 
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 35441fa16be..3c57c1a18bb 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -138,6 +138,19 @@ static struct css_device_id io_subchannel_ids[] = {
 };
 MODULE_DEVICE_TABLE(css, io_subchannel_ids);
 
+static int io_subchannel_prepare(struct subchannel *sch)
+{
+	struct ccw_device *cdev;
+	/*
+	 * Don't allow suspend while a ccw device registration
+	 * is still outstanding.
+	 */
+	cdev = sch_get_cdev(sch);
+	if (cdev && !device_is_registered(&cdev->dev))
+		return -EAGAIN;
+	return 0;
+}
+
 static struct css_driver io_subchannel_driver = {
 	.owner = THIS_MODULE,
 	.subchannel_type = io_subchannel_ids,
@@ -148,6 +161,7 @@ static struct css_driver io_subchannel_driver = {
 	.probe = io_subchannel_probe,
 	.remove = io_subchannel_remove,
 	.shutdown = io_subchannel_shutdown,
+	.prepare = io_subchannel_prepare,
 };
 
 struct workqueue_struct *ccw_device_work;
@@ -1775,6 +1789,15 @@ ccw_device_probe_console(void)
 	return &console_cdev;
 }
 
+static int ccw_device_pm_restore(struct device *dev);
+
+int ccw_device_force_console(void)
+{
+	if (!console_cdev_in_use)
+		return -ENODEV;
+	return ccw_device_pm_restore(&console_cdev.dev);
+}
+EXPORT_SYMBOL_GPL(ccw_device_force_console);
 
 const char *cio_get_console_cdev_name(struct subchannel *sch)
 {
@@ -1895,6 +1918,242 @@ static void ccw_device_shutdown(struct device *dev)
 	disable_cmf(cdev);
 }
 
+static int ccw_device_pm_prepare(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+
+	if (work_pending(&cdev->private->kick_work))
+		return -EAGAIN;
+	/* Fail while device is being set online/offline. */
+	if (atomic_read(&cdev->private->onoff))
+		return -EAGAIN;
+
+	if (cdev->online && cdev->drv && cdev->drv->prepare)
+		return cdev->drv->prepare(cdev);
+
+	return 0;
+}
+
+static void ccw_device_pm_complete(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+
+	if (cdev->online && cdev->drv && cdev->drv->complete)
+		cdev->drv->complete(cdev);
+}
+
+static int ccw_device_pm_freeze(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret, cm_enabled;
+
+	/* Fail suspend while device is in transistional state. */
+	if (!dev_fsm_final_state(cdev))
+		return -EAGAIN;
+	if (!cdev->online)
+		return 0;
+	if (cdev->drv && cdev->drv->freeze) {
+		ret = cdev->drv->freeze(cdev);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irq(sch->lock);
+	cm_enabled = cdev->private->cmb != NULL;
+	spin_unlock_irq(sch->lock);
+	if (cm_enabled) {
+		/* Don't have the css write on memory. */
+		ret = ccw_set_cmf(cdev, 0);
+		if (ret)
+			return ret;
+	}
+	/* From here on, disallow device driver I/O. */
+	spin_lock_irq(sch->lock);
+	ret = cio_disable_subchannel(sch);
+	spin_unlock_irq(sch->lock);
+
+	return ret;
+}
+
+static int ccw_device_pm_thaw(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret, cm_enabled;
+
+	if (!cdev->online)
+		return 0;
+
+	spin_lock_irq(sch->lock);
+	/* Allow device driver I/O again. */
+	ret = cio_enable_subchannel(sch, (u32)(addr_t)sch);
+	cm_enabled = cdev->private->cmb != NULL;
+	spin_unlock_irq(sch->lock);
+	if (ret)
+		return ret;
+
+	if (cm_enabled) {
+		ret = ccw_set_cmf(cdev, 1);
+		if (ret)
+			return ret;
+	}
+
+	if (cdev->drv && cdev->drv->thaw)
+		ret = cdev->drv->thaw(cdev);
+
+	return ret;
+}
+
+static void __ccw_device_pm_restore(struct ccw_device *cdev)
+{
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret;
+
+	if (cio_is_console(sch->schid))
+		goto out;
+	/*
+	 * While we were sleeping, devices may have gone or become
+	 * available again. Kick re-detection.
+	 */
+	spin_lock_irq(sch->lock);
+	cdev->private->flags.resuming = 1;
+	ret = ccw_device_recognition(cdev);
+	spin_unlock_irq(sch->lock);
+	if (ret) {
+		CIO_MSG_EVENT(0, "Couldn't start recognition for device "
+			      "%s (ret=%d)\n", dev_name(&cdev->dev), ret);
+		spin_lock_irq(sch->lock);
+		cdev->private->state = DEV_STATE_DISCONNECTED;
+		spin_unlock_irq(sch->lock);
+		/* notify driver after the resume cb */
+		goto out;
+	}
+	wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev) ||
+		   cdev->private->state == DEV_STATE_DISCONNECTED);
+
+out:
+	cdev->private->flags.resuming = 0;
+}
+
+static int resume_handle_boxed(struct ccw_device *cdev)
+{
+	cdev->private->state = DEV_STATE_BOXED;
+	if (ccw_device_notify(cdev, CIO_BOXED))
+		return 0;
+	ccw_device_schedule_sch_unregister(cdev);
+	return -ENODEV;
+}
+
+static int resume_handle_disc(struct ccw_device *cdev)
+{
+	cdev->private->state = DEV_STATE_DISCONNECTED;
+	if (ccw_device_notify(cdev, CIO_GONE))
+		return 0;
+	ccw_device_schedule_sch_unregister(cdev);
+	return -ENODEV;
+}
+
+static int ccw_device_pm_restore(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret = 0, cm_enabled;
+
+	__ccw_device_pm_restore(cdev);
+	spin_lock_irq(sch->lock);
+	if (cio_is_console(sch->schid)) {
+		cio_enable_subchannel(sch, (u32)(addr_t)sch);
+		spin_unlock_irq(sch->lock);
+		goto out_restore;
+	}
+	cdev->private->flags.donotify = 0;
+	/* check recognition results */
+	switch (cdev->private->state) {
+	case DEV_STATE_OFFLINE:
+		break;
+	case DEV_STATE_BOXED:
+		ret = resume_handle_boxed(cdev);
+		spin_unlock_irq(sch->lock);
+		if (ret)
+			goto out;
+		goto out_restore;
+	case DEV_STATE_DISCONNECTED:
+		goto out_disc_unlock;
+	default:
+		goto out_unreg_unlock;
+	}
+	/* check if the device id has changed */
+	if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
+		CIO_MSG_EVENT(0, "resume: sch %s: failed (devno changed from "
+			      "%04x to %04x)\n", dev_name(&sch->dev),
+			      cdev->private->dev_id.devno,
+			      sch->schib.pmcw.dev);
+		goto out_unreg_unlock;
+	}
+	/* check if the device type has changed */
+	if (!ccw_device_test_sense_data(cdev)) {
+		ccw_device_update_sense_data(cdev);
+		PREPARE_WORK(&cdev->private->kick_work,
+			     ccw_device_do_unbind_bind);
+		queue_work(ccw_device_work, &cdev->private->kick_work);
+		ret = -ENODEV;
+		goto out_unlock;
+	}
+	if (!cdev->online) {
+		ret = 0;
+		goto out_unlock;
+	}
+	ret = ccw_device_online(cdev);
+	if (ret)
+		goto out_disc_unlock;
+
+	cm_enabled = cdev->private->cmb != NULL;
+	spin_unlock_irq(sch->lock);
+
+	wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
+	if (cdev->private->state != DEV_STATE_ONLINE) {
+		spin_lock_irq(sch->lock);
+		goto out_disc_unlock;
+	}
+	if (cm_enabled) {
+		ret = ccw_set_cmf(cdev, 1);
+		if (ret) {
+			CIO_MSG_EVENT(2, "resume: cdev %s: cmf failed "
+				      "(rc=%d)\n", dev_name(&cdev->dev), ret);
+			ret = 0;
+		}
+	}
+
+out_restore:
+	if (cdev->online && cdev->drv && cdev->drv->restore)
+		ret = cdev->drv->restore(cdev);
+out:
+	return ret;
+
+out_disc_unlock:
+	ret = resume_handle_disc(cdev);
+	spin_unlock_irq(sch->lock);
+	if (ret)
+		return ret;
+	goto out_restore;
+
+out_unreg_unlock:
+	ccw_device_schedule_sch_unregister(cdev);
+	ret = -ENODEV;
+out_unlock:
+	spin_unlock_irq(sch->lock);
+	return ret;
+}
+
+static struct dev_pm_ops ccw_pm_ops = {
+	.prepare = ccw_device_pm_prepare,
+	.complete = ccw_device_pm_complete,
+	.freeze = ccw_device_pm_freeze,
+	.thaw = ccw_device_pm_thaw,
+	.restore = ccw_device_pm_restore,
+};
+
 struct bus_type ccw_bus_type = {
 	.name   = "ccw",
 	.match  = ccw_bus_match,
@@ -1902,6 +2161,7 @@ struct bus_type ccw_bus_type = {
 	.probe  = ccw_device_probe,
 	.remove = ccw_device_remove,
 	.shutdown = ccw_device_shutdown,
+	.pm = &ccw_pm_ops,
 };
 
 /**
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index f1cbbd94ad4..e3975107a57 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -87,6 +87,8 @@ int ccw_device_is_orphan(struct ccw_device *);
 int ccw_device_recognition(struct ccw_device *);
 int ccw_device_online(struct ccw_device *);
 int ccw_device_offline(struct ccw_device *);
+void ccw_device_update_sense_data(struct ccw_device *);
+int ccw_device_test_sense_data(struct ccw_device *);
 void ccw_device_schedule_sch_unregister(struct ccw_device *);
 int ccw_purge_blacklisted(void);
 
@@ -133,5 +135,6 @@ extern struct bus_type ccw_bus_type;
 void retry_set_schib(struct ccw_device *cdev);
 void cmf_retry_copy_block(struct ccw_device *);
 int cmf_reenable(struct ccw_device *);
+int ccw_set_cmf(struct ccw_device *cdev, int enable);
 extern struct device_attribute dev_attr_cmb_enable;
 #endif
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index e4604926156..3db88c52d28 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -177,29 +177,21 @@ ccw_device_cancel_halt_clear(struct ccw_device *cdev)
 	panic("Can't stop i/o on subchannel.\n");
 }
 
-static int
-ccw_device_handle_oper(struct ccw_device *cdev)
+void ccw_device_update_sense_data(struct ccw_device *cdev)
 {
-	struct subchannel *sch;
+	memset(&cdev->id, 0, sizeof(cdev->id));
+	cdev->id.cu_type   = cdev->private->senseid.cu_type;
+	cdev->id.cu_model  = cdev->private->senseid.cu_model;
+	cdev->id.dev_type  = cdev->private->senseid.dev_type;
+	cdev->id.dev_model = cdev->private->senseid.dev_model;
+}
 
-	sch = to_subchannel(cdev->dev.parent);
-	cdev->private->flags.recog_done = 1;
-	/*
-	 * Check if cu type and device type still match. If
-	 * not, it is certainly another device and we have to
-	 * de- and re-register.
-	 */
-	if (cdev->id.cu_type != cdev->private->senseid.cu_type ||
-	    cdev->id.cu_model != cdev->private->senseid.cu_model ||
-	    cdev->id.dev_type != cdev->private->senseid.dev_type ||
-	    cdev->id.dev_model != cdev->private->senseid.dev_model) {
-		PREPARE_WORK(&cdev->private->kick_work,
-			     ccw_device_do_unbind_bind);
-		queue_work(ccw_device_work, &cdev->private->kick_work);
-		return 0;
-	}
-	cdev->private->flags.donotify = 1;
-	return 1;
+int ccw_device_test_sense_data(struct ccw_device *cdev)
+{
+	return cdev->id.cu_type == cdev->private->senseid.cu_type &&
+		cdev->id.cu_model == cdev->private->senseid.cu_model &&
+		cdev->id.dev_type == cdev->private->senseid.dev_type &&
+		cdev->id.dev_model == cdev->private->senseid.dev_model;
 }
 
 /*
@@ -233,7 +225,7 @@ static void
 ccw_device_recog_done(struct ccw_device *cdev, int state)
 {
 	struct subchannel *sch;
-	int notify, old_lpm, same_dev;
+	int old_lpm;
 
 	sch = to_subchannel(cdev->dev.parent);
 
@@ -263,8 +255,12 @@ ccw_device_recog_done(struct ccw_device *cdev, int state)
 		wake_up(&cdev->private->wait_q);
 		return;
 	}
-	notify = 0;
-	same_dev = 0; /* Keep the compiler quiet... */
+	if (cdev->private->flags.resuming) {
+		cdev->private->state = state;
+		cdev->private->flags.recog_done = 1;
+		wake_up(&cdev->private->wait_q);
+		return;
+	}
 	switch (state) {
 	case DEV_STATE_NOT_OPER:
 		CIO_MSG_EVENT(2, "SenseID : unknown device %04x on "
@@ -273,34 +269,31 @@ ccw_device_recog_done(struct ccw_device *cdev, int state)
 			      sch->schid.ssid, sch->schid.sch_no);
 		break;
 	case DEV_STATE_OFFLINE:
-		if (cdev->online) {
-			same_dev = ccw_device_handle_oper(cdev);
-			notify = 1;
+		if (!cdev->online) {
+			ccw_device_update_sense_data(cdev);
+			/* Issue device info message. */
+			CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
+				      "CU  Type/Mod = %04X/%02X, Dev Type/Mod "
+				      "= %04X/%02X\n",
+				      cdev->private->dev_id.ssid,
+				      cdev->private->dev_id.devno,
+				      cdev->id.cu_type, cdev->id.cu_model,
+				      cdev->id.dev_type, cdev->id.dev_model);
+			break;
 		}
-		/* fill out sense information */
-		memset(&cdev->id, 0, sizeof(cdev->id));
-		cdev->id.cu_type   = cdev->private->senseid.cu_type;
-		cdev->id.cu_model  = cdev->private->senseid.cu_model;
-		cdev->id.dev_type  = cdev->private->senseid.dev_type;
-		cdev->id.dev_model = cdev->private->senseid.dev_model;
-		if (notify) {
-			cdev->private->state = DEV_STATE_OFFLINE;
-			if (same_dev) {
-				/* Get device online again. */
-				ccw_device_online(cdev);
-				wake_up(&cdev->private->wait_q);
-			}
-			return;
+		cdev->private->state = DEV_STATE_OFFLINE;
+		cdev->private->flags.recog_done = 1;
+		if (ccw_device_test_sense_data(cdev)) {
+			cdev->private->flags.donotify = 1;
+			ccw_device_online(cdev);
+			wake_up(&cdev->private->wait_q);
+		} else {
+			ccw_device_update_sense_data(cdev);
+			PREPARE_WORK(&cdev->private->kick_work,
+				     ccw_device_do_unbind_bind);
+			queue_work(ccw_device_work, &cdev->private->kick_work);
 		}
-		/* Issue device info message. */
-		CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
-			      "CU  Type/Mod = %04X/%02X, Dev Type/Mod = "
-			      "%04X/%02X\n",
-			      cdev->private->dev_id.ssid,
-			      cdev->private->dev_id.devno,
-			      cdev->id.cu_type, cdev->id.cu_model,
-			      cdev->id.dev_type, cdev->id.dev_model);
-		break;
+		return;
 	case DEV_STATE_BOXED:
 		CIO_MSG_EVENT(0, "SenseID : boxed device %04x on "
 			      " subchannel 0.%x.%04x\n",
@@ -502,9 +495,6 @@ ccw_device_recognition(struct ccw_device *cdev)
 	struct subchannel *sch;
 	int ret;
 
-	if ((cdev->private->state != DEV_STATE_NOT_OPER) &&
-	    (cdev->private->state != DEV_STATE_BOXED))
-		return -EINVAL;
 	sch = to_subchannel(cdev->dev.parent);
 	ret = cio_enable_subchannel(sch, (u32)(addr_t)sch);
 	if (ret != 0)
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 151754d5474..2d0efee8a29 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -1,10 +1,8 @@
 /*
- *  drivers/s390/cio/device_ops.c
+ * Copyright IBM Corp. 2002, 2009
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
- *			 IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Cornelia Huck (cornelia.huck@de.ibm.com)
+ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *	      Cornelia Huck (cornelia.huck@de.ibm.com)
  */
 #include <linux/module.h>
 #include <linux/init.h>
@@ -114,16 +112,17 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm)
 	struct subchannel *sch;
 	int ret;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
+	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE &&
 	    cdev->private->state != DEV_STATE_W4SENSE)
 		return -EINVAL;
-	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
+
 	ret = cio_clear(sch);
 	if (ret == 0)
 		cdev->private->intparm = intparm;
@@ -161,11 +160,11 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa,
 	struct subchannel *sch;
 	int ret;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_VERIFY ||
@@ -339,16 +338,17 @@ int ccw_device_halt(struct ccw_device *cdev, unsigned long intparm)
 	struct subchannel *sch;
 	int ret;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
+	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE &&
 	    cdev->private->state != DEV_STATE_W4SENSE)
 		return -EINVAL;
-	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
+
 	ret = cio_halt(sch);
 	if (ret == 0)
 		cdev->private->intparm = intparm;
@@ -372,11 +372,11 @@ int ccw_device_resume(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE ||
@@ -471,11 +471,11 @@ __u8 ccw_device_get_path_mask(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
-	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
+	if (!cdev->dev.parent)
 		return 0;
-	else
-		return sch->lpm;
+
+	sch = to_subchannel(cdev->dev.parent);
+	return sch->lpm;
 }
 
 /*
@@ -588,6 +588,8 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw,
 	int rc;
 
 	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EIO;
 	/* Adjust requested path mask to excluded varied off paths. */
@@ -677,6 +679,8 @@ int ccw_device_tm_intrg(struct ccw_device *cdev)
 {
 	struct subchannel *sch = to_subchannel(cdev->dev.parent);
 
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EIO;
 	if (!scsw_is_tm(&sch->schib.scsw) ||
diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h
index c4f3e7c9a85..0b8f381bd20 100644
--- a/drivers/s390/cio/io_sch.h
+++ b/drivers/s390/cio/io_sch.h
@@ -107,6 +107,7 @@ struct ccw_device_private {
 		unsigned int recog_done:1;  /* dev. recog. complete */
 		unsigned int fake_irb:1;    /* deliver faked irb */
 		unsigned int intretry:1;    /* retry internal operation */
+		unsigned int resuming:1;    /* recognition while resume */
 	} __attribute__((packed)) flags;
 	unsigned long intparm;	/* user interruption parameter */
 	struct qdio_irq *qdio_data;
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index accd957454e..d79cf5bf0e6 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -881,42 +881,26 @@ no_handler:
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
 }
 
-static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
-				       int dstat)
+static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
+				      int dstat)
 {
 	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
 
-	if (cstat || (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END))) {
-		DBF_ERROR("EQ:ck con");
-		goto error;
-	}
+	DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
 
-	if (!(dstat & DEV_STAT_DEV_END)) {
-		DBF_ERROR("EQ:no dev");
+	if (cstat)
 		goto error;
-	}
-
-	if (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) {
-		DBF_ERROR("EQ: bad io");
+	if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
 		goto error;
-	}
-	return 0;
+	if (!(dstat & DEV_STAT_DEV_END))
+		goto error;
+	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
+	return;
+
 error:
 	DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
 	DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
-
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
-	return 1;
-}
-
-static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
-				      int dstat)
-{
-	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
-	DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
-	if (!qdio_establish_check_errors(cdev, cstat, dstat))
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
 }
 
 /* qdio interrupt handler */
@@ -946,7 +930,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		}
 	}
 	qdio_irq_check_sense(irq_ptr, irb);
-
 	cstat = irb->scsw.cmd.cstat;
 	dstat = irb->scsw.cmd.dstat;
 
@@ -954,22 +937,19 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	case QDIO_IRQ_STATE_INACTIVE:
 		qdio_establish_handle_irq(cdev, cstat, dstat);
 		break;
-
 	case QDIO_IRQ_STATE_CLEANUP:
 		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 		break;
-
 	case QDIO_IRQ_STATE_ESTABLISHED:
 	case QDIO_IRQ_STATE_ACTIVE:
 		if (cstat & SCHN_STAT_PCI) {
 			qdio_int_handler_pci(irq_ptr);
 			return;
 		}
-		if ((cstat & ~SCHN_STAT_PCI) || dstat) {
+		if (cstat || dstat)
 			qdio_handle_activate_check(cdev, intparm, cstat,
 						   dstat);
-			break;
-		}
+		break;
 	default:
 		WARN_ON(1);
 	}
@@ -1514,7 +1494,7 @@ int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
 
 	if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) ||
 	    (count > QDIO_MAX_BUFFERS_PER_Q) ||
-	    (q_nr > QDIO_MAX_QUEUES_PER_IRQ))
+	    (q_nr >= QDIO_MAX_QUEUES_PER_IRQ))
 		return -EINVAL;
 
 	if (!count)
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index 136d0f0b1e9..eff943923c6 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -25,18 +25,6 @@ struct qdio_perf_stats perf_stats;
 static struct proc_dir_entry *qdio_perf_pde;
 #endif
 
-inline void qdio_perf_stat_inc(atomic_long_t *count)
-{
-	if (qdio_performance_stats)
-		atomic_long_inc(count);
-}
-
-inline void qdio_perf_stat_dec(atomic_long_t *count)
-{
-	if (qdio_performance_stats)
-		atomic_long_dec(count);
-}
-
 /*
  * procfs functions
  */
diff --git a/drivers/s390/cio/qdio_perf.h b/drivers/s390/cio/qdio_perf.h
index 7821ac4fa51..ff4504ce1e3 100644
--- a/drivers/s390/cio/qdio_perf.h
+++ b/drivers/s390/cio/qdio_perf.h
@@ -9,7 +9,6 @@
 #define QDIO_PERF_H
 
 #include <linux/types.h>
-#include <linux/device.h>
 #include <asm/atomic.h>
 
 struct qdio_perf_stats {
@@ -50,10 +49,13 @@ struct qdio_perf_stats {
 extern struct qdio_perf_stats perf_stats;
 extern int qdio_performance_stats;
 
+static inline void qdio_perf_stat_inc(atomic_long_t *count)
+{
+	if (qdio_performance_stats)
+		atomic_long_inc(count);
+}
+
 int qdio_setup_perf_stats(void);
 void qdio_remove_perf_stats(void);
 
-extern void qdio_perf_stat_inc(atomic_long_t *count);
-extern void qdio_perf_stat_dec(atomic_long_t *count);
-
 #endif
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index cbc8566fab7..e38e5d306fa 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -173,8 +173,9 @@ static void kvm_notify(struct virtqueue *vq)
  * this device and sets it up.
  */
 static struct virtqueue *kvm_find_vq(struct virtio_device *vdev,
-				    unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				     unsigned index,
+				     void (*callback)(struct virtqueue *vq),
+				     const char *name)
 {
 	struct kvm_device *kdev = to_kvmdev(vdev);
 	struct kvm_vqconfig *config;
@@ -194,7 +195,7 @@ static struct virtqueue *kvm_find_vq(struct virtio_device *vdev,
 
 	vq = vring_new_virtqueue(config->num, KVM_S390_VIRTIO_RING_ALIGN,
 				 vdev, (void *) config->address,
-				 kvm_notify, callback);
+				 kvm_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto unmap;
@@ -226,6 +227,38 @@ static void kvm_del_vq(struct virtqueue *vq)
 				       KVM_S390_VIRTIO_RING_ALIGN));
 }
 
+static void kvm_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		kvm_del_vq(vq);
+}
+
+static int kvm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[])
+{
+	struct kvm_device *kdev = to_kvmdev(vdev);
+	int i;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > kdev->desc->num_vq)
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = kvm_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error;
+	}
+	return 0;
+
+error:
+	kvm_del_vqs(vdev);
+	return PTR_ERR(vqs[i]);
+}
+
 /*
  * The config ops structure as defined by virtio config
  */
@@ -237,8 +270,8 @@ static struct virtio_config_ops kvm_vq_configspace_ops = {
 	.get_status = kvm_get_status,
 	.set_status = kvm_set_status,
 	.reset = kvm_reset,
-	.find_vq = kvm_find_vq,
-	.del_vq = kvm_del_vq,
+	.find_vqs = kvm_find_vqs,
+	.del_vqs = kvm_del_vqs,
 };
 
 /*
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index a7745c82b4a..cb909a5b504 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -8,7 +8,7 @@ config LCS
 	   Select this option if you want to use LCS networking on IBM System z.
 	   This device driver supports Token Ring (IEEE 802.5),
 	   FDDI (IEEE 802.7) and Ethernet.
-	   To compile as a module, choose M. The module name is lcs.ko.
+	   To compile as a module, choose M. The module name is lcs.
 	   If you do not know what it is, it's safe to choose Y.
 
 config CTCM
@@ -21,7 +21,7 @@ config CTCM
 	  It also supports virtual CTCs when running under VM.
 	  This driver also supports channel-to-channel MPC SNA devices.
 	  MPC is an SNA protocol device used by Communication Server for Linux.
-	  To compile as a module, choose M. The module name is ctcm.ko.
+	  To compile as a module, choose M. The module name is ctcm.
 	  To compile into the kernel, choose Y.
 	  If you do not need any channel-to-channel connection, choose N.
 
@@ -34,7 +34,7 @@ config NETIUCV
 	  link between VM guests. Using ifconfig a point-to-point connection
 	  can be established to the Linux on IBM System z
 	  running on the other VM guest. To compile as a module, choose M.
-	  The module name is netiucv.ko. If unsure, choose Y.
+	  The module name is netiucv. If unsure, choose Y.
 
 config SMSGIUCV
 	tristate "IUCV special message support (VM only)"
@@ -50,7 +50,7 @@ config CLAW
 	  This driver supports channel attached CLAW devices.
 	  CLAW is Common Link Access for Workstation.  Common devices
           that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
-	  To compile as a module, choose M. The module name is claw.ko.
+	  To compile as a module, choose M. The module name is claw.
 	  To compile into the kernel, choose Y.
 
 config QETH
@@ -65,14 +65,14 @@ config QETH
 	  <http://www.ibm.com/developerworks/linux/linux390>
 
 	  To compile this driver as a module, choose M.
-	  The module name is qeth.ko.
+	  The module name is qeth.
 
 config QETH_L2
         tristate "qeth layer 2 device support"
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 2 mode.
-          To compile as a module, choose M. The module name is qeth_l2.ko.
+          To compile as a module, choose M. The module name is qeth_l2.
           If unsure, choose y.
 
 config QETH_L3
@@ -80,7 +80,7 @@ config QETH_L3
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 3 mode.
-          To compile as a module choose M. The module name is qeth_l3.ko.
+          To compile as a module choose M. The module name is qeth_l3.
           If unsure, choose Y.
 
 config QETH_IPV6
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 30a43cc79e7..d40f7a934f9 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -3,12 +3,12 @@
  *    ESCON CLAW network driver
  *
  *  Linux for zSeries version
- *    Copyright (C) 2002,2005 IBM Corporation
+ *    Copyright IBM Corp. 2002, 2009
  *  Author(s) Original code written by:
- *              Kazuo Iimura (iimura@jp.ibm.com)
+ *		Kazuo Iimura <iimura@jp.ibm.com>
  *   	      Rewritten by
- *              Andy Richter (richtera@us.ibm.com)
- *              Marc Price (mwprice@us.ibm.com)
+ *		Andy Richter <richtera@us.ibm.com>
+ *		Marc Price <mwprice@us.ibm.com>
  *
  *    sysfs parms:
  *   group x.x.rrrr,x.x.wwww
@@ -253,6 +253,11 @@ static void claw_free_wrt_buf(struct net_device *dev);
 /* Functions for unpack reads   */
 static void unpack_read(struct net_device *dev);
 
+static int claw_pm_prepare(struct ccwgroup_device *gdev)
+{
+	return -EPERM;
+}
+
 /* ccwgroup table  */
 
 static struct ccwgroup_driver claw_group_driver = {
@@ -264,6 +269,7 @@ static struct ccwgroup_driver claw_group_driver = {
         .remove      = claw_remove_device,
         .set_online  = claw_new_device,
         .set_offline = claw_shutdown_device,
+	.prepare     = claw_pm_prepare,
 };
 
 /*
@@ -338,12 +344,6 @@ claw_tx(struct sk_buff *skb, struct net_device *dev)
 
 	CLAW_DBF_TEXT(4, trace, "claw_tx");
         p_ch=&privptr->channel[WRITE];
-        if (skb == NULL) {
-                privptr->stats.tx_dropped++;
-		privptr->stats.tx_errors++;
-		CLAW_DBF_TEXT_(2, trace, "clawtx%d", -EIO);
-                return -EIO;
-        }
         spin_lock_irqsave(get_ccwdev_lock(p_ch->cdev), saveflags);
         rc=claw_hw_tx( skb, dev, 1 );
         spin_unlock_irqrestore(get_ccwdev_lock(p_ch->cdev), saveflags);
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 77f4033a0f4..222e4739443 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -1,7 +1,7 @@
 /*
  * drivers/s390/net/ctcm_main.c
  *
- * Copyright IBM Corp. 2001, 2007
+ * Copyright IBM Corp. 2001, 2009
  * Author(s):
  *	Original CTC driver(s):
  *		Fritz Elfert (felfert@millenux.com)
@@ -1677,10 +1677,8 @@ static void ctcm_remove_device(struct ccwgroup_device *cgdev)
 	BUG_ON(priv == NULL);
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
-			"removing device %s, r/w = %s/%s, proto : %d",
-			priv->channel[READ]->netdev->name,
-			priv->channel[READ]->id, priv->channel[WRITE]->id,
-			priv->protocol);
+			"removing device %p, proto : %d",
+			cgdev, priv->protocol);
 
 	if (cgdev->state == CCWGROUP_ONLINE)
 		ctcm_shutdown_device(cgdev);
@@ -1690,6 +1688,38 @@ static void ctcm_remove_device(struct ccwgroup_device *cgdev)
 	put_device(&cgdev->dev);
 }
 
+static int ctcm_pm_suspend(struct ccwgroup_device *gdev)
+{
+	struct ctcm_priv *priv = dev_get_drvdata(&gdev->dev);
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	netif_device_detach(priv->channel[READ]->netdev);
+	ctcm_close(priv->channel[READ]->netdev);
+	ccw_device_set_offline(gdev->cdev[1]);
+	ccw_device_set_offline(gdev->cdev[0]);
+	return 0;
+}
+
+static int ctcm_pm_resume(struct ccwgroup_device *gdev)
+{
+	struct ctcm_priv *priv = dev_get_drvdata(&gdev->dev);
+	int rc;
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	rc = ccw_device_set_online(gdev->cdev[1]);
+	if (rc)
+		goto err_out;
+	rc = ccw_device_set_online(gdev->cdev[0]);
+	if (rc)
+		goto err_out;
+	ctcm_open(priv->channel[READ]->netdev);
+err_out:
+	netif_device_attach(priv->channel[READ]->netdev);
+	return rc;
+}
+
 static struct ccwgroup_driver ctcm_group_driver = {
 	.owner       = THIS_MODULE,
 	.name        = CTC_DRIVER_NAME,
@@ -1699,6 +1729,9 @@ static struct ccwgroup_driver ctcm_group_driver = {
 	.remove      = ctcm_remove_device,
 	.set_online  = ctcm_new_device,
 	.set_offline = ctcm_shutdown_device,
+	.freeze	     = ctcm_pm_suspend,
+	.thaw	     = ctcm_pm_resume,
+	.restore     = ctcm_pm_resume,
 };
 
 
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index a45bc24eb5f..07a25c3f94b 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1,15 +1,12 @@
 /*
- *  linux/drivers/s390/net/lcs.c
- *
  *  Linux for S/390 Lan Channel Station Network Driver
  *
- *  Copyright (C)  1999-2001 IBM Deutschland Entwicklung GmbH,
- *			     IBM Corporation
- *    Author(s): Original Code written by
- *			  DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- *		 Rewritten by
- *			  Frank Pavlic (fpavlic@de.ibm.com) and
- *		 	  Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *  Copyright IBM Corp. 1999, 2009
+ *  Author(s): Original Code written by
+ *			DJ Barrow <djbarrow@de.ibm.com,barrow_dj@yahoo.com>
+ *	       Rewritten by
+ *			Frank Pavlic <fpavlic@de.ibm.com> and
+ *			Martin Schwidefsky <schwidefsky@de.ibm.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2313,6 +2310,60 @@ lcs_remove_device(struct ccwgroup_device *ccwgdev)
 	put_device(&ccwgdev->dev);
 }
 
+static int lcs_pm_suspend(struct lcs_card *card)
+{
+	if (card->dev)
+		netif_device_detach(card->dev);
+	lcs_set_allowed_threads(card, 0);
+	lcs_wait_for_threads(card, 0xffffffff);
+	if (card->state != DEV_STATE_DOWN)
+		__lcs_shutdown_device(card->gdev, 1);
+	return 0;
+}
+
+static int lcs_pm_resume(struct lcs_card *card)
+{
+	int rc = 0;
+
+	if (card->state == DEV_STATE_RECOVER)
+		rc = lcs_new_device(card->gdev);
+	if (card->dev)
+		netif_device_attach(card->dev);
+	if (rc) {
+		dev_warn(&card->gdev->dev, "The lcs device driver "
+			"failed to recover the device\n");
+	}
+	return rc;
+}
+
+static int lcs_prepare(struct ccwgroup_device *gdev)
+{
+	return 0;
+}
+
+static void lcs_complete(struct ccwgroup_device *gdev)
+{
+	return;
+}
+
+static int lcs_freeze(struct ccwgroup_device *gdev)
+{
+	struct lcs_card *card = dev_get_drvdata(&gdev->dev);
+	return lcs_pm_suspend(card);
+}
+
+static int lcs_thaw(struct ccwgroup_device *gdev)
+{
+	struct lcs_card *card = dev_get_drvdata(&gdev->dev);
+	return lcs_pm_resume(card);
+}
+
+static int lcs_restore(struct ccwgroup_device *gdev)
+{
+	struct lcs_card *card = dev_get_drvdata(&gdev->dev);
+	return lcs_pm_resume(card);
+}
+
 /**
  * LCS ccwgroup driver registration
  */
@@ -2325,6 +2376,11 @@ static struct ccwgroup_driver lcs_group_driver = {
 	.remove      = lcs_remove_device,
 	.set_online  = lcs_new_device,
 	.set_offline = lcs_shutdown_device,
+	.prepare     = lcs_prepare,
+	.complete    = lcs_complete,
+	.freeze	     = lcs_freeze,
+	.thaw	     = lcs_thaw,
+	.restore     = lcs_restore,
 };
 
 /**
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index be716e45f7a..fdb02d043d3 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1,11 +1,15 @@
 /*
  * IUCV network driver
  *
- * Copyright 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
+ * Copyright IBM Corp. 2001, 2009
  *
- * Sysfs integration and all bugs therein by Cornelia Huck
- * (cornelia.huck@de.ibm.com)
+ * Author(s):
+ *	Original netiucv driver:
+ *		Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
+ *	Sysfs integration and all bugs therein:
+ *		Cornelia Huck (cornelia.huck@de.ibm.com)
+ *	PM functions:
+ *		Ursula Braun (ursula.braun@de.ibm.com)
  *
  * Documentation used:
  *  the source of the original IUCV driver by:
@@ -149,10 +153,27 @@ PRINT_##importance(header "%02x %02x %02x %02x  %02x %02x %02x %02x  " \
 
 #define PRINTK_HEADER " iucv: "       /* for debugging */
 
+/* dummy device to make sure netiucv_pm functions are called */
+static struct device *netiucv_dev;
+
+static int netiucv_pm_prepare(struct device *);
+static void netiucv_pm_complete(struct device *);
+static int netiucv_pm_freeze(struct device *);
+static int netiucv_pm_restore_thaw(struct device *);
+
+static struct dev_pm_ops netiucv_pm_ops = {
+	.prepare = netiucv_pm_prepare,
+	.complete = netiucv_pm_complete,
+	.freeze = netiucv_pm_freeze,
+	.thaw = netiucv_pm_restore_thaw,
+	.restore = netiucv_pm_restore_thaw,
+};
+
 static struct device_driver netiucv_driver = {
 	.owner = THIS_MODULE,
 	.name = "netiucv",
 	.bus  = &iucv_bus,
+	.pm = &netiucv_pm_ops,
 };
 
 static int netiucv_callback_connreq(struct iucv_path *,
@@ -233,6 +254,7 @@ struct netiucv_priv {
 	fsm_instance            *fsm;
         struct iucv_connection  *conn;
 	struct device           *dev;
+	int			 pm_state;
 };
 
 /**
@@ -1265,6 +1287,72 @@ static int netiucv_close(struct net_device *dev)
 	return 0;
 }
 
+static int netiucv_pm_prepare(struct device *dev)
+{
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	return 0;
+}
+
+static void netiucv_pm_complete(struct device *dev)
+{
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	return;
+}
+
+/**
+ * netiucv_pm_freeze() - Freeze PM callback
+ * @dev:	netiucv device
+ *
+ * close open netiucv interfaces
+ */
+static int netiucv_pm_freeze(struct device *dev)
+{
+	struct netiucv_priv *priv = dev->driver_data;
+	struct net_device *ndev = NULL;
+	int rc = 0;
+
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	if (priv && priv->conn)
+		ndev = priv->conn->netdev;
+	if (!ndev)
+		goto out;
+	netif_device_detach(ndev);
+	priv->pm_state = fsm_getstate(priv->fsm);
+	rc = netiucv_close(ndev);
+out:
+	return rc;
+}
+
+/**
+ * netiucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev:	netiucv device
+ *
+ * re-open netiucv interfaces closed during freeze
+ */
+static int netiucv_pm_restore_thaw(struct device *dev)
+{
+	struct netiucv_priv *priv = dev->driver_data;
+	struct net_device *ndev = NULL;
+	int rc = 0;
+
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	if (priv && priv->conn)
+		ndev = priv->conn->netdev;
+	if (!ndev)
+		goto out;
+	switch (priv->pm_state) {
+	case DEV_STATE_RUNNING:
+	case DEV_STATE_STARTWAIT:
+		rc = netiucv_open(ndev);
+		break;
+	default:
+		break;
+	}
+	netif_device_attach(ndev);
+out:
+	return rc;
+}
+
 /**
  * Start transmission of a packet.
  * Called from generic network device layer.
@@ -1315,9 +1403,9 @@ static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 	dev->trans_start = jiffies;
-	rc = netiucv_transmit_skb(privptr->conn, skb) != 0;
+	rc = netiucv_transmit_skb(privptr->conn, skb);
 	netiucv_clear_busy(dev);
-	return rc;
+	return rc ? NETDEV_TX_BUSY : NETDEV_TX_OK;
 }
 
 /**
@@ -1731,7 +1819,6 @@ static int netiucv_register_device(struct net_device *ndev)
 	struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL);
 	int ret;
 
-
 	IUCV_DBF_TEXT(trace, 3, __func__);
 
 	if (dev) {
@@ -2100,6 +2187,7 @@ static void __exit netiucv_exit(void)
 		netiucv_unregister_device(dev);
 	}
 
+	device_unregister(netiucv_dev);
 	driver_unregister(&netiucv_driver);
 	iucv_unregister(&netiucv_handler, 1);
 	iucv_unregister_dbf_views();
@@ -2125,10 +2213,25 @@ static int __init netiucv_init(void)
 		IUCV_DBF_TEXT_(setup, 2, "ret %d from driver_register\n", rc);
 		goto out_iucv;
 	}
-
+	/* establish dummy device */
+	netiucv_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!netiucv_dev) {
+		rc = -ENOMEM;
+		goto out_driver;
+	}
+	dev_set_name(netiucv_dev, "netiucv");
+	netiucv_dev->bus = &iucv_bus;
+	netiucv_dev->parent = iucv_root;
+	netiucv_dev->release = (void (*)(struct device *))kfree;
+	netiucv_dev->driver = &netiucv_driver;
+	rc = device_register(netiucv_dev);
+	if (rc)
+		goto out_driver;
 	netiucv_banner();
 	return rc;
 
+out_driver:
+	driver_unregister(&netiucv_driver);
 out_iucv:
 	iucv_unregister(&netiucv_handler, 1);
 out_dbf:
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c827d69b5a9..d53621c4acb 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1,7 +1,7 @@
 /*
  *  drivers/s390/net/qeth_core_main.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
  *		 Frank Pavlic <fpavlic@de.ibm.com>,
  *		 Thomas Spatzier <tspat@de.ibm.com>,
@@ -952,6 +952,7 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 		buf->buffer->element[i].addr = NULL;
 		buf->buffer->element[i].flags = 0;
 	}
+	buf->buffer->element[15].flags = 0;
 	buf->next_element_to_fill = 0;
 	atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
 }
@@ -1140,6 +1141,8 @@ static int qeth_setup_card(struct qeth_card *card)
 	card->ipato.enabled = 0;
 	card->ipato.invert4 = 0;
 	card->ipato.invert6 = 0;
+	if (card->info.type == QETH_CARD_TYPE_IQD)
+		card->options.checksum_type = NO_CHECKSUMMING;
 	/* init QDIO stuff */
 	qeth_init_qdio_info(card);
 	return 0;
@@ -2934,8 +2937,8 @@ int qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return cast_type;
 
-	if (skb->dst && skb->dst->neighbour) {
-		cast_type = skb->dst->neighbour->type;
+	if (skb_dst(skb) && skb_dst(skb)->neighbour) {
+		cast_type = skb_dst(skb)->neighbour->type;
 		if ((cast_type == RTN_BROADCAST) ||
 		    (cast_type == RTN_MULTICAST) ||
 		    (cast_type == RTN_ANYCAST))
@@ -4192,6 +4195,50 @@ static void qeth_core_shutdown(struct ccwgroup_device *gdev)
 		card->discipline.ccwgdriver->shutdown(gdev);
 }
 
+static int qeth_core_prepare(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->prepare)
+		return card->discipline.ccwgdriver->prepare(gdev);
+	return 0;
+}
+
+static void qeth_core_complete(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->complete)
+		card->discipline.ccwgdriver->complete(gdev);
+}
+
+static int qeth_core_freeze(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->freeze)
+		return card->discipline.ccwgdriver->freeze(gdev);
+	return 0;
+}
+
+static int qeth_core_thaw(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->thaw)
+		return card->discipline.ccwgdriver->thaw(gdev);
+	return 0;
+}
+
+static int qeth_core_restore(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->restore)
+		return card->discipline.ccwgdriver->restore(gdev);
+	return 0;
+}
+
 static struct ccwgroup_driver qeth_core_ccwgroup_driver = {
 	.owner = THIS_MODULE,
 	.name = "qeth",
@@ -4201,6 +4248,11 @@ static struct ccwgroup_driver qeth_core_ccwgroup_driver = {
 	.set_online = qeth_core_set_online,
 	.set_offline = qeth_core_set_offline,
 	.shutdown = qeth_core_shutdown,
+	.prepare = qeth_core_prepare,
+	.complete = qeth_core_complete,
+	.freeze = qeth_core_freeze,
+	.thaw = qeth_core_thaw,
+	.restore = qeth_core_restore,
 };
 
 static ssize_t
diff --git a/drivers/s390/net/qeth_core_mpc.c b/drivers/s390/net/qeth_core_mpc.c
index 06f4de1f050..ec24901c802 100644
--- a/drivers/s390/net/qeth_core_mpc.c
+++ b/drivers/s390/net/qeth_core_mpc.c
@@ -181,6 +181,8 @@ static struct ipa_rc_msg qeth_ipa_rc_msg[] = {
 	{IPA_RC_L2_ADDR_TABLE_FULL,	"Layer2 address table full"},
 	{IPA_RC_L2_DUP_LAYER3_MAC,	"Duplicate with layer 3 MAC"},
 	{IPA_RC_L2_GMAC_NOT_FOUND,	"GMAC not found"},
+	{IPA_RC_L2_MAC_NOT_AUTH_BY_HYP,	"L2 mac not authorized by hypervisor"},
+	{IPA_RC_L2_MAC_NOT_AUTH_BY_ADP,	"L2 mac not authorized by adapter"},
 	{IPA_RC_L2_MAC_NOT_FOUND,	"L2 mac address not found"},
 	{IPA_RC_L2_INVALID_VLAN_ID,	"L2 invalid vlan id"},
 	{IPA_RC_L2_DUP_VLAN_ID,		"L2 duplicate vlan id"},
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 18548822e37..eecb2ee62e8 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -168,6 +168,8 @@ enum qeth_ipa_return_codes {
 	IPA_RC_L2_ADDR_TABLE_FULL	= 0x2006,
 	IPA_RC_L2_DUP_LAYER3_MAC	= 0x200a,
 	IPA_RC_L2_GMAC_NOT_FOUND	= 0x200b,
+	IPA_RC_L2_MAC_NOT_AUTH_BY_HYP	= 0x200c,
+	IPA_RC_L2_MAC_NOT_AUTH_BY_ADP	= 0x200d,
 	IPA_RC_L2_MAC_NOT_FOUND		= 0x2010,
 	IPA_RC_L2_INVALID_VLAN_ID	= 0x2015,
 	IPA_RC_L2_DUP_VLAN_ID		= 0x2016,
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 172031baedc..81d7f268418 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1,7 +1,7 @@
 /*
  *  drivers/s390/net/qeth_l2_main.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
  *		 Frank Pavlic <fpavlic@de.ibm.com>,
  *		 Thomas Spatzier <tspat@de.ibm.com>,
@@ -19,6 +19,7 @@
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
 #include <linux/ip.h>
+#include <linux/list.h>
 
 #include "qeth_core.h"
 
@@ -130,7 +131,7 @@ static int qeth_l2_send_setgroupmac_cb(struct qeth_card *card,
 	cmd = (struct qeth_ipa_cmd *) data;
 	mac = &cmd->data.setdelmac.mac[0];
 	/* MAC already registered, needed in couple/uncouple case */
-	if (cmd->hdr.return_code == 0x2005) {
+	if (cmd->hdr.return_code ==  IPA_RC_L2_DUP_MAC) {
 		QETH_DBF_MESSAGE(2, "Group MAC %pM already existing on %s \n",
 			  mac, QETH_CARD_IFNAME(card));
 		cmd->hdr.return_code = 0;
@@ -502,6 +503,30 @@ static int qeth_l2_send_setmac_cb(struct qeth_card *card,
 	if (cmd->hdr.return_code) {
 		QETH_DBF_TEXT_(TRACE, 2, "L2er%x", cmd->hdr.return_code);
 		card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED;
+		switch (cmd->hdr.return_code) {
+		case IPA_RC_L2_DUP_MAC:
+		case IPA_RC_L2_DUP_LAYER3_MAC:
+			dev_warn(&card->gdev->dev,
+				"MAC address "
+				"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+				"already exists\n",
+				card->dev->dev_addr[0], card->dev->dev_addr[1],
+				card->dev->dev_addr[2], card->dev->dev_addr[3],
+				card->dev->dev_addr[4], card->dev->dev_addr[5]);
+			break;
+		case IPA_RC_L2_MAC_NOT_AUTH_BY_HYP:
+		case IPA_RC_L2_MAC_NOT_AUTH_BY_ADP:
+			dev_warn(&card->gdev->dev,
+				"MAC address "
+				"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+				"is not authorized\n",
+				card->dev->dev_addr[0], card->dev->dev_addr[1],
+				card->dev->dev_addr[2], card->dev->dev_addr[3],
+				card->dev->dev_addr[4], card->dev->dev_addr[5]);
+			break;
+		default:
+			break;
+		}
 		cmd->hdr.return_code = -EIO;
 	} else {
 		card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED;
@@ -616,6 +641,7 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 {
 	struct qeth_card *card = dev->ml_priv;
 	struct dev_addr_list *dm;
+	struct netdev_hw_addr *ha;
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
@@ -629,8 +655,8 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	for (dm = dev->mc_list; dm; dm = dm->next)
 		qeth_l2_add_mc(card, dm->da_addr, 0);
 
-	for (dm = dev->uc_list; dm; dm = dm->next)
-		qeth_l2_add_mc(card, dm->da_addr, 1);
+	list_for_each_entry(ha, &dev->uc_list, list)
+		qeth_l2_add_mc(card, ha->addr, 1);
 
 	spin_unlock_bh(&card->mclock);
 	if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
@@ -839,6 +865,7 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
 
+	qeth_set_allowed_threads(card, 0, 1);
 	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
 
 	if (cgdev->state == CCWGROUP_ONLINE) {
@@ -974,8 +1001,9 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 			dev_warn(&card->gdev->dev,
 				"The LAN is offline\n");
 			card->lan_online = 0;
+			return 0;
 		}
-		return rc;
+		goto out_remove;
 	} else
 		card->lan_online = 1;
 
@@ -1113,12 +1141,62 @@ static void qeth_l2_shutdown(struct ccwgroup_device *gdev)
 	qeth_clear_qdio_buffers(card);
 }
 
+static int qeth_l2_pm_suspend(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+
+	if (card->dev)
+		netif_device_detach(card->dev);
+	qeth_set_allowed_threads(card, 0, 1);
+	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	if (card->state == CARD_STATE_UP) {
+		card->use_hard_stop = 1;
+		__qeth_l2_set_offline(card->gdev, 1);
+	} else
+		__qeth_l2_set_offline(card->gdev, 0);
+	return 0;
+}
+
+static int qeth_l2_pm_resume(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc = 0;
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		goto out;
+
+	if (card->state == CARD_STATE_RECOVER) {
+		rc = __qeth_l2_set_online(card->gdev, 1);
+		if (rc) {
+			if (card->dev) {
+				rtnl_lock();
+				dev_close(card->dev);
+				rtnl_unlock();
+			}
+		}
+	} else
+		rc = __qeth_l2_set_online(card->gdev, 0);
+out:
+	qeth_set_allowed_threads(card, 0xffffffff, 0);
+	if (card->dev)
+		netif_device_attach(card->dev);
+	if (rc)
+		dev_warn(&card->gdev->dev, "The qeth device driver "
+			"failed to recover an error on the device\n");
+	return rc;
+}
+
 struct ccwgroup_driver qeth_l2_ccwgroup_driver = {
 	.probe = qeth_l2_probe_device,
 	.remove = qeth_l2_remove_device,
 	.set_online = qeth_l2_set_online,
 	.set_offline = qeth_l2_set_offline,
 	.shutdown = qeth_l2_shutdown,
+	.freeze = qeth_l2_pm_suspend,
+	.thaw = qeth_l2_pm_resume,
+	.restore = qeth_l2_pm_resume,
 };
 EXPORT_SYMBOL_GPL(qeth_l2_ccwgroup_driver);
 
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 0ba3817cb6a..54872406864 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1,7 +1,7 @@
 /*
  *  drivers/s390/net/qeth_l3_main.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
  *		 Frank Pavlic <fpavlic@de.ibm.com>,
  *		 Thomas Spatzier <tspat@de.ibm.com>,
@@ -1920,16 +1920,22 @@ static inline __u16 qeth_l3_rebuild_skb(struct qeth_card *card,
 		 hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]);
 	}
 
-	skb->ip_summed = card->options.checksum_type;
-	if (card->options.checksum_type == HW_CHECKSUMMING) {
+	switch (card->options.checksum_type) {
+	case SW_CHECKSUMMING:
+		skb->ip_summed = CHECKSUM_NONE;
+		break;
+	case NO_CHECKSUMMING:
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		break;
+	case HW_CHECKSUMMING:
 		if ((hdr->hdr.l3.ext_flags &
-		      (QETH_HDR_EXT_CSUM_HDR_REQ |
-		       QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
-		     (QETH_HDR_EXT_CSUM_HDR_REQ |
-		      QETH_HDR_EXT_CSUM_TRANSP_REQ))
+		    (QETH_HDR_EXT_CSUM_HDR_REQ |
+		     QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
+		    (QETH_HDR_EXT_CSUM_HDR_REQ |
+		     QETH_HDR_EXT_CSUM_TRANSP_REQ))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		else
-			skb->ip_summed = SW_CHECKSUMMING;
+			skb->ip_summed = CHECKSUM_NONE;
 	}
 
 	return vlan_id;
@@ -2543,9 +2549,9 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 		/* IPv4 */
 		hdr->hdr.l3.flags = qeth_l3_get_qeth_hdr_flags4(cast_type);
 		memset(hdr->hdr.l3.dest_addr, 0, 12);
-		if ((skb->dst) && (skb->dst->neighbour)) {
+		if ((skb_dst(skb)) && (skb_dst(skb)->neighbour)) {
 			*((u32 *) (&hdr->hdr.l3.dest_addr[12])) =
-			    *((u32 *) skb->dst->neighbour->primary_key);
+			    *((u32 *) skb_dst(skb)->neighbour->primary_key);
 		} else {
 			/* fill in destination address used in ip header */
 			*((u32 *) (&hdr->hdr.l3.dest_addr[12])) =
@@ -2556,9 +2562,9 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 		hdr->hdr.l3.flags = qeth_l3_get_qeth_hdr_flags6(cast_type);
 		if (card->info.type == QETH_CARD_TYPE_IQD)
 			hdr->hdr.l3.flags &= ~QETH_HDR_PASSTHRU;
-		if ((skb->dst) && (skb->dst->neighbour)) {
+		if ((skb_dst(skb)) && (skb_dst(skb)->neighbour)) {
 			memcpy(hdr->hdr.l3.dest_addr,
-			       skb->dst->neighbour->primary_key, 16);
+			       skb_dst(skb)->neighbour->primary_key, 16);
 		} else {
 			/* fill in destination address used in ip header */
 			memcpy(hdr->hdr.l3.dest_addr,
@@ -3006,6 +3012,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 	card->dev->features |=	NETIF_F_HW_VLAN_TX |
 				NETIF_F_HW_VLAN_RX |
 				NETIF_F_HW_VLAN_FILTER;
+	card->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	return register_netdev(card->dev);
@@ -3070,6 +3077,7 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
 
+	qeth_set_allowed_threads(card, 0, 1);
 	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
 
 	if (cgdev->state == CCWGROUP_ONLINE) {
@@ -3141,8 +3149,9 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 			dev_warn(&card->gdev->dev,
 				"The LAN is offline\n");
 			card->lan_online = 0;
+			return 0;
 		}
-		return rc;
+		goto out_remove;
 	} else
 		card->lan_online = 1;
 	qeth_set_large_send(card, card->options.large_send);
@@ -3274,12 +3283,62 @@ static void qeth_l3_shutdown(struct ccwgroup_device *gdev)
 	qeth_clear_qdio_buffers(card);
 }
 
+static int qeth_l3_pm_suspend(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+
+	if (card->dev)
+		netif_device_detach(card->dev);
+	qeth_set_allowed_threads(card, 0, 1);
+	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	if (card->state == CARD_STATE_UP) {
+		card->use_hard_stop = 1;
+		__qeth_l3_set_offline(card->gdev, 1);
+	} else
+		__qeth_l3_set_offline(card->gdev, 0);
+	return 0;
+}
+
+static int qeth_l3_pm_resume(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc = 0;
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		goto out;
+
+	if (card->state == CARD_STATE_RECOVER) {
+		rc = __qeth_l3_set_online(card->gdev, 1);
+		if (rc) {
+			if (card->dev) {
+				rtnl_lock();
+				dev_close(card->dev);
+				rtnl_unlock();
+			}
+		}
+	} else
+		rc = __qeth_l3_set_online(card->gdev, 0);
+out:
+	qeth_set_allowed_threads(card, 0xffffffff, 0);
+	if (card->dev)
+		netif_device_attach(card->dev);
+	if (rc)
+		dev_warn(&card->gdev->dev, "The qeth device driver "
+			"failed to recover an error on the device\n");
+	return rc;
+}
+
 struct ccwgroup_driver qeth_l3_ccwgroup_driver = {
 	.probe = qeth_l3_probe_device,
 	.remove = qeth_l3_remove_device,
 	.set_online = qeth_l3_set_online,
 	.set_offline = qeth_l3_set_offline,
 	.shutdown = qeth_l3_shutdown,
+	.freeze = qeth_l3_pm_suspend,
+	.thaw = qeth_l3_pm_resume,
+	.restore = qeth_l3_pm_resume,
 };
 EXPORT_SYMBOL_GPL(qeth_l3_ccwgroup_driver);
 
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 164e090c262..e76a320d373 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -1,7 +1,8 @@
 /*
  * IUCV special message driver
  *
- * Copyright 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2003, 2009
+ *
  * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
  *
  * This program is free software; you can redistribute it and/or modify
@@ -40,6 +41,8 @@ MODULE_AUTHOR
 MODULE_DESCRIPTION ("Linux for S/390 IUCV special message driver");
 
 static struct iucv_path *smsg_path;
+/* dummy device used as trigger for PM functions */
+static struct device *smsg_dev;
 
 static DEFINE_SPINLOCK(smsg_list_lock);
 static LIST_HEAD(smsg_list);
@@ -132,14 +135,51 @@ void smsg_unregister_callback(char *prefix,
 	kfree(cb);
 }
 
+static int smsg_pm_freeze(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "smsg_pm_freeze\n");
+#endif
+	if (smsg_path)
+		iucv_path_sever(smsg_path, NULL);
+	return 0;
+}
+
+static int smsg_pm_restore_thaw(struct device *dev)
+{
+	int rc;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "smsg_pm_restore_thaw\n");
+#endif
+	if (smsg_path) {
+		memset(smsg_path, 0, sizeof(*smsg_path));
+		smsg_path->msglim = 255;
+		smsg_path->flags = 0;
+		rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG    ",
+				       NULL, NULL, NULL);
+		printk(KERN_ERR "iucv_path_connect returned with rc %i\n", rc);
+	}
+	return 0;
+}
+
+static struct dev_pm_ops smsg_pm_ops = {
+	.freeze = smsg_pm_freeze,
+	.thaw = smsg_pm_restore_thaw,
+	.restore = smsg_pm_restore_thaw,
+};
+
 static struct device_driver smsg_driver = {
+	.owner = THIS_MODULE,
 	.name = "SMSGIUCV",
 	.bus  = &iucv_bus,
+	.pm = &smsg_pm_ops,
 };
 
 static void __exit smsg_exit(void)
 {
 	cpcmd("SET SMSG IUCV", NULL, 0, NULL);
+	device_unregister(smsg_dev);
 	iucv_unregister(&smsg_handler, 1);
 	driver_unregister(&smsg_driver);
 }
@@ -166,12 +206,29 @@ static int __init smsg_init(void)
 	rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG    ",
 			       NULL, NULL, NULL);
 	if (rc)
-		goto out_free;
+		goto out_free_path;
+	smsg_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!smsg_dev) {
+		rc = -ENOMEM;
+		goto out_free_path;
+	}
+	dev_set_name(smsg_dev, "smsg_iucv");
+	smsg_dev->bus = &iucv_bus;
+	smsg_dev->parent = iucv_root;
+	smsg_dev->release = (void (*)(struct device *))kfree;
+	smsg_dev->driver = &smsg_driver;
+	rc = device_register(smsg_dev);
+	if (rc)
+		goto out_free_dev;
+
 	cpcmd("SET SMSG IUCV", NULL, 0, NULL);
 	return 0;
 
-out_free:
+out_free_dev:
+	kfree(smsg_dev);
+out_free_path:
 	iucv_path_free(smsg_path);
+	smsg_path = NULL;
 out_register:
 	iucv_unregister(&smsg_handler, 1);
 out_driver:
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 733fe3bf628..d9da5c42ccb 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -11,6 +11,54 @@
 
 #include "zfcp_ext.h"
 
+#define ZFCP_MODEL_PRIV 0x4
+
+static int zfcp_ccw_suspend(struct ccw_device *cdev)
+
+{
+	struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+
+	down(&zfcp_data.config_sema);
+
+	zfcp_erp_adapter_shutdown(adapter, 0, "ccsusp1", NULL);
+	zfcp_erp_wait(adapter);
+
+	up(&zfcp_data.config_sema);
+
+	return 0;
+}
+
+static int zfcp_ccw_activate(struct ccw_device *cdev)
+
+{
+	struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+
+	zfcp_erp_modify_adapter_status(adapter, "ccresu1", NULL,
+				       ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
+	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
+				"ccresu2", NULL);
+	zfcp_erp_wait(adapter);
+	flush_work(&adapter->scan_work);
+
+	return 0;
+}
+
+static struct ccw_device_id zfcp_ccw_device_id[] = {
+	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
+	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, ZFCP_MODEL_PRIV) },
+	{},
+};
+MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
+
+/**
+ * zfcp_ccw_priv_sch - check if subchannel is privileged
+ * @adapter: Adapter/Subchannel to check
+ */
+int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
+{
+	return adapter->ccw_device->id.dev_model == ZFCP_MODEL_PRIV;
+}
+
 /**
  * zfcp_ccw_probe - probe function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
@@ -176,8 +224,8 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 					"ccnoti4", NULL);
 		break;
 	case CIO_BOXED:
-		dev_warn(&adapter->ccw_device->dev,
-			 "The ccw device did not respond in time.\n");
+		dev_warn(&adapter->ccw_device->dev, "The FCP device "
+			 "did not respond within the specified time\n");
 		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5", NULL);
 		break;
 	}
@@ -199,14 +247,6 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
 	up(&zfcp_data.config_sema);
 }
 
-static struct ccw_device_id zfcp_ccw_device_id[] = {
-	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
-	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x4) }, /* priv. */
-	{},
-};
-
-MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
-
 static struct ccw_driver zfcp_ccw_driver = {
 	.owner       = THIS_MODULE,
 	.name        = "zfcp",
@@ -217,6 +257,9 @@ static struct ccw_driver zfcp_ccw_driver = {
 	.set_offline = zfcp_ccw_set_offline,
 	.notify      = zfcp_ccw_notify,
 	.shutdown    = zfcp_ccw_shutdown,
+	.freeze      = zfcp_ccw_suspend,
+	.thaw	     = zfcp_ccw_activate,
+	.restore     = zfcp_ccw_activate,
 };
 
 /**
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 0a1a5dd8d01..b99b87ce5a3 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -163,7 +163,7 @@ void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *fsf_req)
 	}
 
 	response->fsf_command = fsf_req->fsf_command;
-	response->fsf_reqid = (unsigned long)fsf_req;
+	response->fsf_reqid = fsf_req->req_id;
 	response->fsf_seqno = fsf_req->seq_no;
 	response->fsf_issued = fsf_req->issued;
 	response->fsf_prot_status = qtcb->prefix.prot_status;
@@ -737,7 +737,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req)
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	strncpy(r->tag, "octc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = (unsigned long)fsf_req;
+	r->fsf_reqid = fsf_req->req_id;
 	r->fsf_seqno = fsf_req->seq_no;
 	r->s_id = fc_host_port_id(adapter->scsi_host);
 	r->d_id = wka_port->d_id;
@@ -773,7 +773,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req)
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	strncpy(r->tag, "rctc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = (unsigned long)fsf_req;
+	r->fsf_reqid = fsf_req->req_id;
 	r->fsf_seqno = fsf_req->seq_no;
 	r->s_id = wka_port->d_id;
 	r->d_id = fc_host_port_id(adapter->scsi_host);
@@ -803,7 +803,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level,
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(rec, 0, sizeof(*rec));
 	strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
-	rec->fsf_reqid = (unsigned long)fsf_req;
+	rec->fsf_reqid = fsf_req->req_id;
 	rec->fsf_seqno = fsf_req->seq_no;
 	rec->s_id = s_id;
 	rec->d_id = d_id;
@@ -965,7 +965,7 @@ static void zfcp_scsi_dbf_event(const char *tag, const char *tag2, int level,
 						      ZFCP_DBF_SCSI_FCP_SNS_INFO);
 				}
 
-				rec->fsf_reqid = (unsigned long)fsf_req;
+				rec->fsf_reqid = fsf_req->req_id;
 				rec->fsf_seqno = fsf_req->seq_no;
 				rec->fsf_issued = fsf_req->issued;
 			}
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 4c362a9069f..2074d45dbf6 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -47,13 +47,6 @@
 
 /********************* CIO/QDIO SPECIFIC DEFINES *****************************/
 
-/* Adapter Identification Parameters */
-#define ZFCP_CONTROL_UNIT_TYPE  0x1731
-#define ZFCP_CONTROL_UNIT_MODEL 0x03
-#define ZFCP_DEVICE_TYPE        0x1732
-#define ZFCP_DEVICE_MODEL       0x03
-#define ZFCP_DEVICE_MODEL_PRIV	0x04
-
 /* DMQ bug workaround: don't use last SBALE */
 #define ZFCP_MAX_SBALES_PER_SBAL	(QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
 
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index fdc9b4352a6..e50ea465bc2 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -880,6 +880,7 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 				zfcp_port_put(port);
 			return ZFCP_ERP_CONTINUES;
 		}
+		/* fall through */
 	case ZFCP_ERP_STEP_NAMESERVER_LOOKUP:
 		if (!port->d_id)
 			return ZFCP_ERP_FAILED;
@@ -894,8 +895,13 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 				act->step = ZFCP_ERP_STEP_PORT_CLOSING;
 				return ZFCP_ERP_CONTINUES;
 			}
-		/* fall through otherwise */
 		}
+		if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
+			port->d_id = 0;
+			_zfcp_erp_port_reopen(port, 0, "erpsoc1", NULL);
+			return ZFCP_ERP_EXIT;
+		}
+		/* fall through otherwise */
 	}
 	return ZFCP_ERP_FAILED;
 }
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 2e31b536548..120a9a1c81f 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -27,6 +27,7 @@ extern int zfcp_sg_setup_table(struct scatterlist *, int);
 
 /* zfcp_ccw.c */
 extern int zfcp_ccw_register(void);
+extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
 extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
 
 /* zfcp_cfdc.c */
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 19ae0842047..35493a82d2a 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -116,7 +116,7 @@ static void zfcp_wka_port_put(struct zfcp_wka_port *wka_port)
 {
 	if (atomic_dec_return(&wka_port->refcount) != 0)
 		return;
-	/* wait 10 miliseconds, other reqs might pop in */
+	/* wait 10 milliseconds, other reqs might pop in */
 	schedule_delayed_work(&wka_port->work, HZ / 100);
 }
 
@@ -150,9 +150,14 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 	struct zfcp_port *port;
 
 	read_lock_irqsave(&zfcp_data.config_lock, flags);
-	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list)
+	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
 		if ((port->d_id & range) == (elem->nport_did & range))
 			zfcp_test_link(port);
+		if (!port->d_id)
+			zfcp_erp_port_reopen(port,
+					     ZFCP_STATUS_COMMON_ERP_FAILED,
+					     "fcrscn1", NULL);
+	}
 
 	read_unlock_irqrestore(&zfcp_data.config_lock, flags);
 }
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 74dee32afba..e6dae3744e7 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -526,6 +526,7 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		break;
 	case FSF_TOPO_AL:
 		fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
+		/* fall through */
 	default:
 		dev_err(&adapter->ccw_device->dev,
 			"Unknown or unsupported arbitrated loop "
@@ -897,6 +898,7 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req)
 		switch (fsq->word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			zfcp_test_link(unit->port);
+			/* fall through */
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -993,6 +995,7 @@ static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req)
 		break;
 	case FSF_PORT_HANDLE_NOT_VALID:
 		zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
+		/* fall through */
 	case FSF_GENERIC_COMMAND_REJECTED:
 	case FSF_PAYLOAD_SIZE_MISMATCH:
 	case FSF_REQUEST_SIZE_TOO_LARGE:
@@ -1399,7 +1402,7 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 	struct fsf_plogi *plogi;
 
 	if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
-		return;
+		goto out;
 
 	switch (header->fsf_status) {
 	case FSF_PORT_ALREADY_OPEN:
@@ -1461,6 +1464,9 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	}
+
+out:
+	zfcp_port_put(port);
 }
 
 /**
@@ -1473,6 +1479,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 	struct qdio_buffer_element *sbale;
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	struct zfcp_fsf_req *req;
+	struct zfcp_port *port = erp_action->port;
 	int retval = -EIO;
 
 	spin_lock_bh(&adapter->req_q_lock);
@@ -1493,16 +1500,18 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
 
 	req->handler = zfcp_fsf_open_port_handler;
-	req->qtcb->bottom.support.d_id = erp_action->port->d_id;
-	req->data = erp_action->port;
+	req->qtcb->bottom.support.d_id = port->d_id;
+	req->data = port;
 	req->erp_action = erp_action;
 	erp_action->fsf_req = req;
+	zfcp_port_get(port);
 
 	zfcp_fsf_start_erp_timer(req);
 	retval = zfcp_fsf_req_send(req);
 	if (retval) {
 		zfcp_fsf_req_free(req);
 		erp_action->fsf_req = NULL;
+		zfcp_port_put(port);
 	}
 out:
 	spin_unlock_bh(&adapter->req_q_lock);
@@ -1590,8 +1599,10 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
 	case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
 		dev_warn(&req->adapter->ccw_device->dev,
 			 "Opening WKA port 0x%x failed\n", wka_port->d_id);
+		/* fall through */
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
+		/* fall through */
 	case FSF_ACCESS_DENIED:
 		wka_port->status = ZFCP_WKA_PORT_OFFLINE;
 		break;
@@ -1876,7 +1887,7 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req)
 
 		if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE) &&
 		    (adapter->adapter_features & FSF_FEATURE_LUN_SHARING) &&
-		    (adapter->ccw_device->id.dev_model != ZFCP_DEVICE_MODEL_PRIV)) {
+		    !zfcp_ccw_priv_sch(adapter)) {
 			exclusive = (bottom->lun_access_info &
 					FSF_UNIT_ACCESS_EXCLUSIVE);
 			readwrite = (bottom->lun_access_info &
@@ -2314,7 +2325,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 {
 	struct zfcp_fsf_req *req;
 	struct fcp_cmnd_iu *fcp_cmnd_iu;
-	unsigned int sbtype;
+	unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
 	int real_bytes, retval = -EIO;
 	struct zfcp_adapter *adapter = unit->port->adapter;
 
@@ -2356,11 +2367,9 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 	switch (scsi_cmnd->sc_data_direction) {
 	case DMA_NONE:
 		req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
-		sbtype = SBAL_FLAGS0_TYPE_READ;
 		break;
 	case DMA_FROM_DEVICE:
 		req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ;
-		sbtype = SBAL_FLAGS0_TYPE_READ;
 		fcp_cmnd_iu->rddata = 1;
 		break;
 	case DMA_TO_DEVICE:
@@ -2369,8 +2378,6 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 		fcp_cmnd_iu->wddata = 1;
 		break;
 	case DMA_BIDIRECTIONAL:
-	default:
-		retval = -EIO;
 		goto failed_scsi_cmnd;
 	}
 
@@ -2394,9 +2401,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 					     scsi_sglist(scsi_cmnd),
 					     FSF_MAX_SBALS_PER_REQ);
 	if (unlikely(real_bytes < 0)) {
-		if (req->sbal_number < FSF_MAX_SBALS_PER_REQ)
-			retval = -EIO;
-		else {
+		if (req->sbal_number >= FSF_MAX_SBALS_PER_REQ) {
 			dev_err(&adapter->ccw_device->dev,
 				"Oversize data package, unit 0x%016Lx "
 				"on port 0x%016Lx closed\n",
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index e8fbeaeb5fb..7d0da230eb6 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -12,6 +12,10 @@
 #include "zfcp_ext.h"
 #include <asm/atomic.h>
 
+static unsigned int default_depth = 32;
+module_param_named(queue_depth, default_depth, uint, 0600);
+MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
+
 /* Find start of Sense Information in FCP response unit*/
 char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
 {
@@ -24,6 +28,12 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
 	return fcp_sns_info_ptr;
 }
 
+static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth)
+{
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+	return sdev->queue_depth;
+}
+
 static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 {
 	struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
@@ -34,7 +44,7 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
 {
 	if (sdp->tagged_supported)
-		scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, 32);
+		scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, default_depth);
 	else
 		scsi_adjust_queue_depth(sdp, 0, 1);
 	return 0;
@@ -647,6 +657,7 @@ struct zfcp_data zfcp_data = {
 		.name			 = "zfcp",
 		.module			 = THIS_MODULE,
 		.proc_name		 = "zfcp",
+		.change_queue_depth	 = zfcp_scsi_change_queue_depth,
 		.slave_alloc		 = zfcp_scsi_slave_alloc,
 		.slave_configure	 = zfcp_scsi_slave_configure,
 		.slave_destroy		 = zfcp_scsi_slave_destroy,
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 124f660a038..75ac19b1192 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -303,7 +303,7 @@ static int openprom_sunos_ioctl(struct inode * inode, struct file * file,
 				struct device_node *dp)
 {
 	DATA *data = file->private_data;
-	struct openpromio *opp;
+	struct openpromio *opp = NULL;
 	int bufsize, error = 0;
 	static int cnt;
 	void __user *argp = (void __user *)arg;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index fb2740789b6..6a19ed9a119 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -191,20 +191,19 @@ config SCSI_ENCLOSURE
 	  it has an enclosure device.  Selecting this option will just allow
 	  certain enclosure conditions to be reported and is not required.
 
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
-	depends on SCSI
-
 config SCSI_MULTI_LUN
 	bool "Probe all LUNs on each SCSI device"
 	depends on SCSI
 	help
-	  If you have a SCSI device that supports more than one LUN (Logical
-	  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
-	  can say Y here to force the SCSI driver to probe for multiple LUNs.
-	  A SCSI device with multiple LUNs acts logically like multiple SCSI
-	  devices. The vast majority of SCSI devices have only one LUN, and
-	  so most people can say N here. The max_luns boot/module parameter 
-	  allows to override this setting.
+	  Some devices support more than one LUN (Logical Unit Number) in order
+	  to allow access to several media, e.g. CD jukebox, USB card reader,
+	  mobile phone in mass storage mode. This option forces the kernel to
+	  probe for all LUNs by default. This setting can be overriden by
+	  max_luns boot/module parameter. Note that this option does not affect
+	  devices conforming to SCSI-3 or higher as they can explicitely report
+	  their number of LUNs. It is safe to say Y here unless you have one of
+	  those rare devices which reacts in an unexpected way when probed for
+	  multiple LUNs.
 
 config SCSI_CONSTANTS
 	bool "Verbose SCSI error reporting (kernel size +=12K)"
@@ -355,6 +354,7 @@ config ISCSI_TCP
 	 http://open-iscsi.org
 
 source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
 
 config SGIWD93_SCSI
 	tristate "SGI WD93C93 SCSI Driver"
@@ -508,6 +508,7 @@ config SCSI_AIC7XXX_OLD
 
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
 
 config SCSI_DPT_I2O
 	tristate "Adaptec I2O RAID support "
@@ -1050,16 +1051,6 @@ config SCSI_IZIP_SLOW_CTR
 
 	  Generally, saying N is fine.
 
-config SCSI_MVSAS
-	tristate "Marvell 88SE6440 SAS/SATA support"
-	depends on PCI && SCSI
-	select SCSI_SAS_LIBSAS
-	help
-	  This driver supports Marvell SAS/SATA PCI devices.
-
-	  To compiler this driver as a module, choose M here: the module
-	  will be called mvsas.
-
 config SCSI_NCR53C406A
 	tristate "NCR53c406a SCSI support"
 	depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index a5049cfb40e..25429ea63d0 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -126,9 +126,10 @@ obj-$(CONFIG_SCSI_IBMVSCSIS)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_IBMVFC)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_HPTIOP)	+= hptiop.o
 obj-$(CONFIG_SCSI_STEX)		+= stex.o
-obj-$(CONFIG_SCSI_MVSAS)	+= mvsas.o
+obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgb3i/
+obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
 
 obj-$(CONFIG_ARM)		+= arm/
 
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index c889d845868..1cdf09a4779 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -224,7 +224,7 @@ NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
 	return ret;
 }
 
-static int
+static irqreturn_t
 NCR_D700_intr(int irq, void *data)
 {
 	struct NCR_D700_private *p = (struct NCR_D700_private *)data;
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
new file mode 100644
index 00000000000..2fceb19eb27
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -0,0 +1,155 @@
+/* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_CONSTANTS_H_
+#define __57XX_ISCSI_CONSTANTS_H_
+
+/**
+* This file defines HSI constants for the iSCSI flows
+*/
+
+/* iSCSI request op codes */
+#define ISCSI_OPCODE_CLEANUP_REQUEST    (7)
+
+/* iSCSI response/messages op codes */
+#define ISCSI_OPCODE_CLEANUP_RESPONSE 		(0x27)
+#define ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION    (0)
+
+/* iSCSI task types */
+#define ISCSI_TASK_TYPE_READ    (0)
+#define ISCSI_TASK_TYPE_WRITE   (1)
+#define ISCSI_TASK_TYPE_MPATH   (2)
+
+/* initial CQ sequence numbers */
+#define ISCSI_INITIAL_SN    (1)
+
+/* KWQ (kernel work queue) layer codes */
+#define ISCSI_KWQE_LAYER_CODE   (6)
+
+/* KWQ (kernel work queue) request op codes */
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN1 (0)
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN2 (1)
+#define ISCSI_KWQE_OPCODE_UPDATE_CONN   (2)
+#define ISCSI_KWQE_OPCODE_DESTROY_CONN  (3)
+#define ISCSI_KWQE_OPCODE_INIT1         (4)
+#define ISCSI_KWQE_OPCODE_INIT2         (5)
+
+/* KCQ (kernel completion queue) response op codes */
+#define ISCSI_KCQE_OPCODE_OFFLOAD_CONN  (0x10)
+#define ISCSI_KCQE_OPCODE_UPDATE_CONN   (0x12)
+#define ISCSI_KCQE_OPCODE_DESTROY_CONN  (0x13)
+#define ISCSI_KCQE_OPCODE_INIT          (0x14)
+#define ISCSI_KCQE_OPCODE_FW_CLEAN_TASK	(0x15)
+#define ISCSI_KCQE_OPCODE_TCP_RESET     (0x16)
+#define ISCSI_KCQE_OPCODE_TCP_SYN       (0x17)
+#define ISCSI_KCQE_OPCODE_TCP_FIN       (0X18)
+#define ISCSI_KCQE_OPCODE_TCP_ERROR     (0x19)
+#define ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
+#define ISCSI_KCQE_OPCODE_ISCSI_ERROR   (0x21)
+
+/* KCQ (kernel completion queue) completion status */
+#define ISCSI_KCQE_COMPLETION_STATUS_SUCCESS                            (0x0)
+#define ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE                     (0x1)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE                  (0x2)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE                   (0x3)
+#define ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR                          (0x4)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR                        (0x5)
+#define ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR                       (0x6)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_UNEXPECTED_OPCODE     (0xa)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE                (0xb)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN               (0xc)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT                   (0xd)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN                (0xe)
+
+/* Response */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN            (0xf)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T              (0x10)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_IS_ZERO  (0x2c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_TOO_BIG  (0x2d)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0                 (0x11)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1                 (0x12)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2                 (0x13)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3                 (0x14)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4                 (0x15)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5                 (0x16)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6                 (0x17)
+
+/* Data-In */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN        (0x18)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN       (0x19)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO            (0x1a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV          (0x1b)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN                (0x1c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN      (0x1d)
+
+/* R2T */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF            (0x1f)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN                   (0x20)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN                 (0x21)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0 (0x22)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1 (0x23)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED       (0x24)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV           (0x25)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN         (0x26)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO (0x27)
+
+/* TMF */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN        (0x28)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN         (0x29)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN         (0x2a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP   (0x2b)
+
+/* IP/TCP processing errors: */
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT               (0x40)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS                (0x41)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG               (0x42)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_MAX_RTRANS                (0x43)
+
+/* iSCSI licensing errors */
+/* general iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED                (0x50)
+/* additional LOM specific iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED              (0x51)
+
+/* SQ/RQ/CQ DB structure sizes */
+#define ISCSI_SQ_DB_SIZE    (16)
+#define ISCSI_RQ_DB_SIZE    (16)
+#define ISCSI_CQ_DB_SIZE    (80)
+
+#define ISCSI_SQN_TO_NOTIFY_NOT_VALID                                   0xFFFF
+
+/* Page size codes (for flags field in connection offload request) */
+#define ISCSI_PAGE_SIZE_256     (0)
+#define ISCSI_PAGE_SIZE_512     (1)
+#define ISCSI_PAGE_SIZE_1K      (2)
+#define ISCSI_PAGE_SIZE_2K      (3)
+#define ISCSI_PAGE_SIZE_4K      (4)
+#define ISCSI_PAGE_SIZE_8K      (5)
+#define ISCSI_PAGE_SIZE_16K     (6)
+#define ISCSI_PAGE_SIZE_32K     (7)
+#define ISCSI_PAGE_SIZE_64K     (8)
+#define ISCSI_PAGE_SIZE_128K    (9)
+#define ISCSI_PAGE_SIZE_256K    (10)
+#define ISCSI_PAGE_SIZE_512K    (11)
+#define ISCSI_PAGE_SIZE_1M      (12)
+#define ISCSI_PAGE_SIZE_2M      (13)
+#define ISCSI_PAGE_SIZE_4M      (14)
+#define ISCSI_PAGE_SIZE_8M      (15)
+
+/* Iscsi PDU related defines */
+#define ISCSI_HEADER_SIZE   (48)
+#define ISCSI_DIGEST_SHIFT  (2)
+#define ISCSI_DIGEST_SIZE   (4)
+
+#define B577XX_ISCSI_CONNECTION_TYPE    3
+
+#endif /*__57XX_ISCSI_CONSTANTS_H_ */
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
new file mode 100644
index 00000000000..36af1afef9b
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -0,0 +1,1509 @@
+/* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_HSI_LINUX_LE__
+#define __57XX_ISCSI_HSI_LINUX_LE__
+
+/*
+ * iSCSI Async CQE
+ */
+struct bnx2i_async_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u8 async_event;
+	u8 async_vcode;
+	u16 param1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 param1;
+	u8 async_vcode;
+	u8 async_event;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 param2;
+	u16 param3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 param3;
+	u16 param2;
+#endif
+	u32 reserved7[3];
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Buffer Descriptor (BD)
+ */
+struct iscsi_bd {
+	u32 buffer_addr_hi;
+	u32 buffer_addr_lo;
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 buffer_length;
+#elif defined(__LITTLE_ENDIAN)
+	u16 buffer_length;
+	u16 reserved0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+#elif defined(__LITTLE_ENDIAN)
+	u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+	u16 reserved3;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup SQ WQE
+ */
+struct bnx2i_cleanup_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+	u16 reserved3;
+#endif
+	u32 reserved4[10];
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup CQE
+ */
+struct bnx2i_cleanup_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 status;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 status;
+	u8 op_code;
+#endif
+	u32 reserved1[3];
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[7];
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+	u16 reserved6;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * SCSI read/write SQ WQE
+ */
+struct bnx2i_cmd_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ud_buffer_offset;
+	u16 sd_buffer_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sd_buffer_offset;
+	u16 ud_buffer_offset;
+#endif
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+	u32 total_data_transfer_length;
+	u32 cmd_sn;
+	u32 reserved3;
+	u32 cdb[4];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 sd_start_bd_index;
+	u8 ud_start_bd_index;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 ud_start_bd_index;
+	u8 sd_start_bd_index;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * task statistics for write response
+ */
+struct bnx2i_write_resp_task_stat {
+	u32 num_data_ins;
+};
+
+/*
+ * task statistics for read response
+ */
+struct bnx2i_read_resp_task_stat {
+#if defined(__BIG_ENDIAN)
+	u16 num_data_outs;
+	u16 num_r2ts;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_r2ts;
+	u16 num_data_outs;
+#endif
+};
+
+/*
+ * task statistics for iSCSI cmd response
+ */
+union bnx2i_cmd_resp_task_stat {
+	struct bnx2i_write_resp_task_stat write_stat;
+	struct bnx2i_read_resp_task_stat read_stat;
+};
+
+/*
+ * SCSI Command CQE
+ */
+struct bnx2i_cmd_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+	u8 response;
+	u8 status;
+#elif defined(__LITTLE_ENDIAN)
+	u8 status;
+	u8 response;
+	u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved2;
+	u32 residual_count;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[5];
+	union bnx2i_cmd_resp_task_stat task_stat;
+	u32 reserved6;
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+
+
+/*
+ * firmware middle-path request SQ WQE
+ */
+struct bnx2i_fw_mp_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+	u16 hdr_opaque1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hdr_opaque1;
+	u8 op_attr;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 hdr_opaque2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+	u16 reserved0;
+#endif
+	u32 hdr_opaque3[4];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 reserved3;
+	u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+	u8 reserved3;
+	u16 reserved4;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u8 reserved5;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * firmware response - CQE: used only by firmware
+ */
+struct bnx2i_fw_response {
+	u32 hdr_dword1[2];
+	u32 hdr_exp_cmd_sn;
+	u32 hdr_max_cmd_sn;
+	u32 hdr_ttt;
+	u32 hdr_res_cnt;
+	u32 cqe_flags;
+#define ISCSI_FW_RESPONSE_RESERVED2 (0xFF<<0)
+#define ISCSI_FW_RESPONSE_RESERVED2_SHIFT 0
+#define ISCSI_FW_RESPONSE_ERR_CODE (0xFF<<8)
+#define ISCSI_FW_RESPONSE_ERR_CODE_SHIFT 8
+#define ISCSI_FW_RESPONSE_RESERVED3 (0xFFFF<<16)
+#define ISCSI_FW_RESPONSE_RESERVED3_SHIFT 16
+	u32 stat_sn;
+	u32 hdr_dword2[2];
+	u32 hdr_dword3[2];
+	u32 task_stat;
+	u32 reserved0;
+	u32 hdr_itt;
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI KCQ CQE parameters
+ */
+union iscsi_kcqe_params {
+	u32 reserved0[4];
+};
+
+/*
+ * iSCSI KCQ CQE
+ */
+struct iscsi_kcqe {
+	u32 iscsi_conn_id;
+	u32 completion_status;
+	u32 iscsi_conn_context_id;
+	union iscsi_kcqe_params params;
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+#endif
+};
+
+
+
+/*
+ * iSCSI KWQE header
+ */
+struct iscsi_kwqe_header {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+	u8 op_code;
+#elif defined(__LITTLE_ENDIAN)
+	u8 op_code;
+	u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * iSCSI firmware init request 1
+ */
+struct iscsi_kwqe_init1 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u8 reserved0;
+	u8 num_cqs;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_cqs;
+	u8 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 dummy_buffer_addr_lo;
+	u32 dummy_buffer_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 num_ccells_per_conn;
+	u16 num_tasks_per_conn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_tasks_per_conn;
+	u16 num_ccells_per_conn;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 sq_wqes_per_page;
+	u16 sq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_wqes;
+	u16 sq_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cq_log_wqes_per_page;
+	u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+	u16 cq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cq_num_wqes;
+	u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+	u8 cq_log_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cq_num_pages;
+	u16 sq_num_pages;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_pages;
+	u16 cq_num_pages;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 rq_buffer_size;
+	u16 rq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rq_num_wqes;
+	u16 rq_buffer_size;
+#endif
+};
+
+/*
+ * iSCSI firmware init request 2
+ */
+struct iscsi_kwqe_init2 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 max_cq_sqn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 max_cq_sqn;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 error_bit_map[2];
+	u32 reserved1[5];
+};
+
+/*
+ * Initial iSCSI connection offload request 1
+ */
+struct iscsi_kwqe_conn_offload1 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 sq_page_table_addr_lo;
+	u32 sq_page_table_addr_hi;
+	u32 cq_page_table_addr_lo;
+	u32 cq_page_table_addr_hi;
+	u32 reserved0[3];
+};
+
+/*
+ * iSCSI Page Table Entry (PTE)
+ */
+struct iscsi_pte {
+	u32 hi;
+	u32 lo;
+};
+
+/*
+ * Initial iSCSI connection offload request 2
+ */
+struct iscsi_kwqe_conn_offload2 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 rq_page_table_addr_lo;
+	u32 rq_page_table_addr_hi;
+	struct iscsi_pte sq_first_pte;
+	struct iscsi_pte cq_first_pte;
+	u32 num_additional_wqes;
+};
+
+
+/*
+ * Initial iSCSI connection offload request 3
+ */
+struct iscsi_kwqe_conn_offload3 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 reserved1;
+	struct iscsi_pte qp_first_pte[3];
+};
+
+
+/*
+ * iSCSI connection update request
+ */
+struct iscsi_kwqe_conn_update {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 session_error_recovery_level;
+	u8 max_outstanding_r2ts;
+	u8 reserved2;
+	u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+#elif defined(__LITTLE_ENDIAN)
+	u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+	u8 reserved2;
+	u8 max_outstanding_r2ts;
+	u8 session_error_recovery_level;
+#endif
+	u32 context_id;
+	u32 max_send_pdu_length;
+	u32 max_recv_pdu_length;
+	u32 first_burst_length;
+	u32 max_burst_length;
+	u32 exp_stat_sn;
+};
+
+/*
+ * iSCSI destroy connection request
+ */
+struct iscsi_kwqe_conn_destroy {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 context_id;
+	u32 reserved1[6];
+};
+
+/*
+ * iSCSI KWQ WQE
+ */
+union iscsi_kwqe {
+	struct iscsi_kwqe_init1 init1;
+	struct iscsi_kwqe_init2 init2;
+	struct iscsi_kwqe_conn_offload1 conn_offload1;
+	struct iscsi_kwqe_conn_offload2 conn_offload2;
+	struct iscsi_kwqe_conn_update conn_update;
+	struct iscsi_kwqe_conn_destroy conn_destroy;
+};
+
+/*
+ * iSCSI Login SQ WQE
+ */
+struct bnx2i_login_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+	u8 version_max;
+	u8 version_min;
+#elif defined(__LITTLE_ENDIAN)
+	u8 version_min;
+	u8 version_max;
+	u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+	u16 isid_hi;
+	u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tsih;
+	u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cid;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 cid;
+#endif
+	u32 cmd_sn;
+	u32 exp_stat_sn;
+	u32 reserved4;
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved8;
+	u8 reserved7;
+	u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+	u8 reserved7;
+	u16 reserved8;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved10;
+	u8 reserved9;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved9;
+	u8 reserved10;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Login CQE
+ */
+struct bnx2i_login_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+	u8 version_max;
+	u8 version_active;
+#elif defined(__LITTLE_ENDIAN)
+	u8 version_active;
+	u8 version_max;
+	u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u8 err_code;
+	u8 reserved2;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved2;
+	u8 err_code;
+	u16 reserved3;
+#endif
+	u32 stat_sn;
+	u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+	u16 isid_hi;
+	u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tsih;
+	u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 status_class;
+	u8 status_detail;
+	u16 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved4;
+	u8 status_detail;
+	u8 status_class;
+#endif
+	u32 reserved5[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+	u16 reserved6;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Logout SQ WQE
+ */
+struct bnx2i_logout_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cid;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 cid;
+#endif
+	u32 cmd_sn;
+	u32 reserved4[5];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u8 reserved5;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Logout CQE
+ */
+struct bnx2i_logout_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 response;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 response;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6[3];
+#if defined(__BIG_ENDIAN)
+	u16 time_to_wait;
+	u16 time_to_retain;
+#elif defined(__LITTLE_ENDIAN)
+	u16 time_to_retain;
+	u16 time_to_wait;
+#endif
+	u32 reserved7[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved8;
+	u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+	u16 reserved8;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Nop-In CQE
+ */
+struct bnx2i_nop_in_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 ttt;
+	u32 reserved2;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5;
+	u32 lun[2];
+	u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI NOP-OUT SQ WQE
+ */
+struct bnx2i_nop_out_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+	u32 ttt;
+	u32 cmd_sn;
+	u32 reserved3[2];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u8 reserved6;
+	u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+	u8 reserved6;
+	u16 reserved7;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved9;
+	u8 reserved8;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved8;
+	u8 reserved9;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Reject CQE
+ */
+struct bnx2i_reject_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 reason;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 reason;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[8];
+	u32 cq_req_sn;
+};
+
+/*
+ * bnx2i iSCSI TMF SQ WQE
+ */
+struct bnx2i_tmf_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+	u16 reserved1;
+#endif
+	u32 ref_itt;
+	u32 cmd_sn;
+	u32 reserved2;
+	u32 ref_cmd_sn;
+	u32 reserved3[3];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved5;
+	u8 reserved4;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved4;
+	u8 reserved5;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Text SQ WQE
+ */
+struct bnx2i_text_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+	u16 reserved3;
+#endif
+	u32 ttt;
+	u32 cmd_sn;
+	u32 reserved4[2];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT 24
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved7;
+	u8 reserved6;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved6;
+	u8 reserved7;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI SQ WQE
+ */
+union iscsi_request {
+	struct bnx2i_cmd_request cmd;
+	struct bnx2i_tmf_request tmf;
+	struct bnx2i_nop_out_request nop_out;
+	struct bnx2i_login_request login_req;
+	struct bnx2i_text_request text;
+	struct bnx2i_logout_request logout_req;
+	struct bnx2i_cleanup_request cleanup;
+};
+
+
+/*
+ * iSCSI TMF CQE
+ */
+struct bnx2i_tmf_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 response;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 response;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6[7];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+/*
+ * iSCSI Text CQE
+ */
+struct bnx2i_text_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 ttt;
+	u32 reserved2;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5;
+	u32 lun[2];
+	u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+/*
+ * iSCSI CQE
+ */
+union iscsi_response {
+	struct bnx2i_cmd_response cmd;
+	struct bnx2i_tmf_response tmf;
+	struct bnx2i_login_response login_resp;
+	struct bnx2i_text_response text;
+	struct bnx2i_logout_response logout_resp;
+	struct bnx2i_cleanup_response cleanup;
+	struct bnx2i_reject_msg reject;
+	struct bnx2i_async_msg async;
+	struct bnx2i_nop_in_msg nop_in;
+};
+
+#endif /* __57XX_ISCSI_HSI_LINUX_LE__ */
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
new file mode 100644
index 00000000000..820d428ae83
--- /dev/null
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -0,0 +1,7 @@
+config SCSI_BNX2_ISCSI
+	tristate "Broadcom NetXtreme II iSCSI support"
+	select SCSI_ISCSI_ATTRS
+	select CNIC
+	---help---
+	This driver supports iSCSI offload for the Broadcom NetXtreme II
+	devices.
diff --git a/drivers/scsi/bnx2i/Makefile b/drivers/scsi/bnx2i/Makefile
new file mode 100644
index 00000000000..b5802bd2e76
--- /dev/null
+++ b/drivers/scsi/bnx2i/Makefile
@@ -0,0 +1,3 @@
+bnx2i-y := bnx2i_init.o bnx2i_hwi.o bnx2i_iscsi.o bnx2i_sysfs.o
+
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += bnx2i.o
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
new file mode 100644
index 00000000000..d7576f28c6e
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -0,0 +1,771 @@
+/* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#ifndef _BNX2I_H_
+#define _BNX2I_H_
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/kfifo.h>
+#include <linux/netdevice.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "../../net/cnic_if.h"
+#include "57xx_iscsi_hsi.h"
+#include "57xx_iscsi_constants.h"
+
+#define BNX2_ISCSI_DRIVER_NAME		"bnx2i"
+
+#define BNX2I_MAX_ADAPTERS		8
+
+#define ISCSI_MAX_CONNS_PER_HBA		128
+#define ISCSI_MAX_SESS_PER_HBA		ISCSI_MAX_CONNS_PER_HBA
+#define ISCSI_MAX_CMDS_PER_SESS		128
+
+/* Total active commands across all connections supported by devices */
+#define ISCSI_MAX_CMDS_PER_HBA_5708	(28 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_5709	(128 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_57710	(256 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+
+#define ISCSI_MAX_BDS_PER_CMD		32
+
+#define MAX_PAGES_PER_CTRL_STRUCT_POOL	8
+#define BNX2I_RESERVED_SLOW_PATH_CMD_SLOTS	4
+
+/* 5706/08 hardware has limit on maximum buffer size per BD it can handle */
+#define MAX_BD_LENGTH			65535
+#define BD_SPLIT_SIZE			32768
+
+/* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */
+#define BNX2I_SQ_WQES_MIN 		16
+#define BNX2I_570X_SQ_WQES_MAX 		128
+#define BNX2I_5770X_SQ_WQES_MAX 	512
+#define BNX2I_570X_SQ_WQES_DEFAULT 	128
+#define BNX2I_5770X_SQ_WQES_DEFAULT 	256
+
+#define BNX2I_570X_CQ_WQES_MAX 		128
+#define BNX2I_5770X_CQ_WQES_MAX 	512
+
+#define BNX2I_RQ_WQES_MIN 		16
+#define BNX2I_RQ_WQES_MAX 		32
+#define BNX2I_RQ_WQES_DEFAULT 		16
+
+/* CCELLs per conn */
+#define BNX2I_CCELLS_MIN		16
+#define BNX2I_CCELLS_MAX		96
+#define BNX2I_CCELLS_DEFAULT		64
+
+#define ITT_INVALID_SIGNATURE		0xFFFF
+
+#define ISCSI_CMD_CLEANUP_TIMEOUT	100
+
+#define BNX2I_CONN_CTX_BUF_SIZE		16384
+
+#define BNX2I_SQ_WQE_SIZE		64
+#define BNX2I_RQ_WQE_SIZE		256
+#define BNX2I_CQE_SIZE			64
+
+#define MB_KERNEL_CTX_SHIFT		8
+#define MB_KERNEL_CTX_SIZE		(1 << MB_KERNEL_CTX_SHIFT)
+
+#define CTX_SHIFT			7
+#define GET_CID_NUM(cid_addr)		((cid_addr) >> CTX_SHIFT)
+
+#define CTX_OFFSET 			0x10000
+#define MAX_CID_CNT			0x4000
+
+/* 5709 context registers */
+#define BNX2_MQ_CONFIG2			0x00003d00
+#define BNX2_MQ_CONFIG2_CONT_SZ		(0x7L<<4)
+#define BNX2_MQ_CONFIG2_FIRST_L4L5	(0x1fL<<8)
+
+/* 57710's BAR2 is mapped to doorbell registers */
+#define BNX2X_DOORBELL_PCI_BAR		2
+#define BNX2X_MAX_CQS			8
+
+#define CNIC_ARM_CQE			1
+#define CNIC_DISARM_CQE			0
+
+#define REG_RD(__hba, offset)				\
+		readl(__hba->regview + offset)
+#define REG_WR(__hba, offset, val)			\
+		writel(val, __hba->regview + offset)
+
+
+/**
+ * struct generic_pdu_resc - login pdu resource structure
+ *
+ * @req_buf:            driver buffer used to stage payload associated with
+ *                      the login request
+ * @req_dma_addr:       dma address for iscsi login request payload buffer
+ * @req_buf_size:       actual login request payload length
+ * @req_wr_ptr:         pointer into login request buffer when next data is
+ *                      to be written
+ * @resp_hdr:           iscsi header where iscsi login response header is to
+ *                      be recreated
+ * @resp_buf:           buffer to stage login response payload
+ * @resp_dma_addr:      login response payload buffer dma address
+ * @resp_buf_size:      login response paylod length
+ * @resp_wr_ptr:        pointer into login response buffer when next data is
+ *                      to be written
+ * @req_bd_tbl:         iscsi login request payload BD table
+ * @req_bd_dma:         login request BD table dma address
+ * @resp_bd_tbl:        iscsi login response payload BD table
+ * @resp_bd_dma:        login request BD table dma address
+ *
+ * following structure defines buffer info for generic pdus such as iSCSI Login,
+ *	Logout and NOP
+ */
+struct generic_pdu_resc {
+	char *req_buf;
+	dma_addr_t req_dma_addr;
+	u32 req_buf_size;
+	char *req_wr_ptr;
+	struct iscsi_hdr resp_hdr;
+	char *resp_buf;
+	dma_addr_t resp_dma_addr;
+	u32 resp_buf_size;
+	char *resp_wr_ptr;
+	char *req_bd_tbl;
+	dma_addr_t req_bd_dma;
+	char *resp_bd_tbl;
+	dma_addr_t resp_bd_dma;
+};
+
+
+/**
+ * struct bd_resc_page - tracks DMA'able memory allocated for BD tables
+ *
+ * @link:               list head to link elements
+ * @max_ptrs:           maximun pointers that can be stored in this page
+ * @num_valid:          number of pointer valid in this page
+ * @page:               base addess for page pointer array
+ *
+ * structure to track DMA'able memory allocated for command BD tables
+ */
+struct bd_resc_page {
+	struct list_head link;
+	u32 max_ptrs;
+	u32 num_valid;
+	void *page[1];
+};
+
+
+/**
+ * struct io_bdt - I/O buffer destricptor table
+ *
+ * @bd_tbl:             BD table's virtual address
+ * @bd_tbl_dma:         BD table's dma address
+ * @bd_valid:           num valid BD entries
+ *
+ * IO BD table
+ */
+struct io_bdt {
+	struct iscsi_bd *bd_tbl;
+	dma_addr_t bd_tbl_dma;
+	u16 bd_valid;
+};
+
+
+/**
+ * bnx2i_cmd - iscsi command structure
+ *
+ * @scsi_cmd:           SCSI-ML task pointer corresponding to this iscsi cmd
+ * @sg:                 SG list
+ * @io_tbl:             buffer descriptor (BD) table
+ * @bd_tbl_dma:         buffer descriptor (BD) table's dma address
+ */
+struct bnx2i_cmd {
+	struct iscsi_hdr hdr;
+	struct bnx2i_conn *conn;
+	struct scsi_cmnd *scsi_cmd;
+	struct scatterlist *sg;
+	struct io_bdt io_tbl;
+	dma_addr_t bd_tbl_dma;
+	struct bnx2i_cmd_request req;
+};
+
+
+/**
+ * struct bnx2i_conn - iscsi connection structure
+ *
+ * @cls_conn:              pointer to iscsi cls conn
+ * @hba:                   adapter structure pointer
+ * @iscsi_conn_cid:        iscsi conn id
+ * @fw_cid:                firmware iscsi context id
+ * @ep:                    endpoint structure pointer
+ * @gen_pdu:               login/nopout/logout pdu resources
+ * @violation_notified:    bit mask used to track iscsi error/warning messages
+ *                         already printed out
+ *
+ * iSCSI connection structure
+ */
+struct bnx2i_conn {
+	struct iscsi_cls_conn *cls_conn;
+	struct bnx2i_hba *hba;
+	struct completion cmd_cleanup_cmpl;
+	int is_bound;
+
+	u32 iscsi_conn_cid;
+#define BNX2I_CID_RESERVED	0x5AFF
+	u32 fw_cid;
+
+	struct timer_list poll_timer;
+	/*
+	 * Queue Pair (QP) related structure elements.
+	 */
+	struct bnx2i_endpoint *ep;
+
+	/*
+	 * Buffer for login negotiation process
+	 */
+	struct generic_pdu_resc gen_pdu;
+	u64 violation_notified;
+};
+
+
+
+/**
+ * struct iscsi_cid_queue - Per adapter iscsi cid queue
+ *
+ * @cid_que_base:           queue base memory
+ * @cid_que:                queue memory pointer
+ * @cid_q_prod_idx:         produce index
+ * @cid_q_cons_idx:         consumer index
+ * @cid_q_max_idx:          max index. used to detect wrap around condition
+ * @cid_free_cnt:           queue size
+ * @conn_cid_tbl:           iscsi cid to conn structure mapping table
+ *
+ * Per adapter iSCSI CID Queue
+ */
+struct iscsi_cid_queue {
+	void *cid_que_base;
+	u32 *cid_que;
+	u32 cid_q_prod_idx;
+	u32 cid_q_cons_idx;
+	u32 cid_q_max_idx;
+	u32 cid_free_cnt;
+	struct bnx2i_conn **conn_cid_tbl;
+};
+
+/**
+ * struct bnx2i_hba - bnx2i adapter structure
+ *
+ * @link:                  list head to link elements
+ * @cnic:                  pointer to cnic device
+ * @pcidev:                pointer to pci dev
+ * @netdev:                pointer to netdev structure
+ * @regview:               mapped PCI register space
+ * @age:                   age, incremented by every recovery
+ * @cnic_dev_type:         cnic device type, 5706/5708/5709/57710
+ * @mail_queue_access:     mailbox queue access mode, applicable to 5709 only
+ * @reg_with_cnic:         indicates whether the device is register with CNIC
+ * @adapter_state:         adapter state, UP, GOING_DOWN, LINK_DOWN
+ * @mtu_supported:         Ethernet MTU supported
+ * @shost:                 scsi host pointer
+ * @max_sqes:              SQ size
+ * @max_rqes:              RQ size
+ * @max_cqes:              CQ size
+ * @num_ccell:             number of command cells per connection
+ * @ofld_conns_active:     active connection list
+ * @max_active_conns:      max offload connections supported by this device
+ * @cid_que:               iscsi cid queue
+ * @ep_rdwr_lock:          read / write lock to synchronize various ep lists
+ * @ep_ofld_list:          connection list for pending offload completion
+ * @ep_destroy_list:       connection list for pending offload completion
+ * @mp_bd_tbl:             BD table to be used with middle path requests
+ * @mp_bd_dma:             DMA address of 'mp_bd_tbl' memory buffer
+ * @dummy_buffer:          Dummy buffer to be used with zero length scsicmd reqs
+ * @dummy_buf_dma:         DMA address of 'dummy_buffer' memory buffer
+ * @lock:              	   lock to synchonize access to hba structure
+ * @pci_did:               PCI device ID
+ * @pci_vid:               PCI vendor ID
+ * @pci_sdid:              PCI subsystem device ID
+ * @pci_svid:              PCI subsystem vendor ID
+ * @pci_func:              PCI function number in system pci tree
+ * @pci_devno:             PCI device number in system pci tree
+ * @num_wqe_sent:          statistic counter, total wqe's sent
+ * @num_cqe_rcvd:          statistic counter, total cqe's received
+ * @num_intr_claimed:      statistic counter, total interrupts claimed
+ * @link_changed_count:    statistic counter, num of link change notifications
+ *                         received
+ * @ipaddr_changed_count:  statistic counter, num times IP address changed while
+ *                         at least one connection is offloaded
+ * @num_sess_opened:       statistic counter, total num sessions opened
+ * @num_conn_opened:       statistic counter, total num conns opened on this hba
+ * @ctx_ccell_tasks:       captures number of ccells and tasks supported by
+ *                         currently offloaded connection, used to decode
+ *                         context memory
+ *
+ * Adapter Data Structure
+ */
+struct bnx2i_hba {
+	struct list_head link;
+	struct cnic_dev *cnic;
+	struct pci_dev *pcidev;
+	struct net_device *netdev;
+	void __iomem *regview;
+
+	u32 age;
+	unsigned long cnic_dev_type;
+		#define BNX2I_NX2_DEV_5706		0x0
+		#define BNX2I_NX2_DEV_5708		0x1
+		#define BNX2I_NX2_DEV_5709		0x2
+		#define BNX2I_NX2_DEV_57710		0x3
+	u32 mail_queue_access;
+		#define BNX2I_MQ_KERNEL_MODE		0x0
+		#define BNX2I_MQ_KERNEL_BYPASS_MODE	0x1
+		#define BNX2I_MQ_BIN_MODE		0x2
+	unsigned long  reg_with_cnic;
+		#define BNX2I_CNIC_REGISTERED		1
+
+	unsigned long  adapter_state;
+		#define ADAPTER_STATE_UP		0
+		#define ADAPTER_STATE_GOING_DOWN	1
+		#define ADAPTER_STATE_LINK_DOWN		2
+		#define ADAPTER_STATE_INIT_FAILED	31
+	unsigned int mtu_supported;
+		#define BNX2I_MAX_MTU_SUPPORTED		1500
+
+	struct Scsi_Host *shost;
+
+	u32 max_sqes;
+	u32 max_rqes;
+	u32 max_cqes;
+	u32 num_ccell;
+
+	int ofld_conns_active;
+
+	int max_active_conns;
+	struct iscsi_cid_queue cid_que;
+
+	rwlock_t ep_rdwr_lock;
+	struct list_head ep_ofld_list;
+	struct list_head ep_destroy_list;
+
+	/*
+	 * BD table to be used with MP (Middle Path requests.
+	 */
+	char *mp_bd_tbl;
+	dma_addr_t mp_bd_dma;
+	char *dummy_buffer;
+	dma_addr_t dummy_buf_dma;
+
+	spinlock_t lock;	/* protects hba structure access */
+	struct mutex net_dev_lock;/* sync net device access */
+
+	/*
+	 * PCI related info.
+	 */
+	u16 pci_did;
+	u16 pci_vid;
+	u16 pci_sdid;
+	u16 pci_svid;
+	u16 pci_func;
+	u16 pci_devno;
+
+	/*
+	 * Following are a bunch of statistics useful during development
+	 * and later stage for score boarding.
+	 */
+	u32 num_wqe_sent;
+	u32 num_cqe_rcvd;
+	u32 num_intr_claimed;
+	u32 link_changed_count;
+	u32 ipaddr_changed_count;
+	u32 num_sess_opened;
+	u32 num_conn_opened;
+	unsigned int ctx_ccell_tasks;
+};
+
+
+/*******************************************************************************
+ * 	QP [ SQ / RQ / CQ ] info.
+ ******************************************************************************/
+
+/*
+ * SQ/RQ/CQ generic structure definition
+ */
+struct 	sqe {
+	u8 sqe_byte[BNX2I_SQ_WQE_SIZE];
+};
+
+struct 	rqe {
+	u8 rqe_byte[BNX2I_RQ_WQE_SIZE];
+};
+
+struct 	cqe {
+	u8 cqe_byte[BNX2I_CQE_SIZE];
+};
+
+
+enum {
+#if defined(__LITTLE_ENDIAN)
+	CNIC_EVENT_COAL_INDEX	= 0x0,
+	CNIC_SEND_DOORBELL	= 0x4,
+	CNIC_EVENT_CQ_ARM	= 0x7,
+	CNIC_RECV_DOORBELL	= 0x8
+#elif defined(__BIG_ENDIAN)
+	CNIC_EVENT_COAL_INDEX	= 0x2,
+	CNIC_SEND_DOORBELL	= 0x6,
+	CNIC_EVENT_CQ_ARM	= 0x4,
+	CNIC_RECV_DOORBELL	= 0xa
+#endif
+};
+
+
+/*
+ * CQ DB
+ */
+struct bnx2x_iscsi_cq_pend_cmpl {
+	/* CQ producer, updated by Ustorm */
+	u16 ustrom_prod;
+	/* CQ pending completion counter */
+	u16 pend_cntr;
+};
+
+
+struct bnx2i_5771x_cq_db {
+	struct bnx2x_iscsi_cq_pend_cmpl qp_pend_cmpl[BNX2X_MAX_CQS];
+	/* CQ pending completion ITT array */
+	u16 itt[BNX2X_MAX_CQS];
+	/* Cstorm CQ sequence to notify array, updated by driver */;
+	u16 sqn[BNX2X_MAX_CQS];
+	u32 reserved[4] /* 16 byte allignment */;
+};
+
+
+struct bnx2i_5771x_sq_rq_db {
+	u16 prod_idx;
+	u8 reserved0[14]; /* Pad structure size to 16 bytes */
+};
+
+
+struct bnx2i_5771x_dbell_hdr {
+	u8 header;
+	/* 1 for rx doorbell, 0 for tx doorbell */
+#define B577XX_DOORBELL_HDR_RX				(0x1<<0)
+#define B577XX_DOORBELL_HDR_RX_SHIFT			0
+	/* 0 for normal doorbell, 1 for advertise wnd doorbell */
+#define B577XX_DOORBELL_HDR_DB_TYPE			(0x1<<1)
+#define B577XX_DOORBELL_HDR_DB_TYPE_SHIFT		1
+	/* rdma tx only: DPM transaction size specifier (64/128/256/512B) */
+#define B577XX_DOORBELL_HDR_DPM_SIZE			(0x3<<2)
+#define B577XX_DOORBELL_HDR_DPM_SIZE_SHIFT		2
+	/* connection type */
+#define B577XX_DOORBELL_HDR_CONN_TYPE			(0xF<<4)
+#define B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT		4
+};
+
+struct bnx2i_5771x_dbell {
+	struct bnx2i_5771x_dbell_hdr dbell;
+	u8 pad[3];
+
+};
+
+/**
+ * struct qp_info - QP (share queue region) atrributes structure
+ *
+ * @ctx_base:           ioremapped pci register base to access doorbell register
+ *                      pertaining to this offloaded connection
+ * @sq_virt:            virtual address of send queue (SQ) region
+ * @sq_phys:            DMA address of SQ memory region
+ * @sq_mem_size:        SQ size
+ * @sq_prod_qe:         SQ producer entry pointer
+ * @sq_cons_qe:         SQ consumer entry pointer
+ * @sq_first_qe:        virtaul address of first entry in SQ
+ * @sq_last_qe:         virtaul address of last entry in SQ
+ * @sq_prod_idx:        SQ producer index
+ * @sq_cons_idx:        SQ consumer index
+ * @sqe_left:           number sq entry left
+ * @sq_pgtbl_virt:      page table describing buffer consituting SQ region
+ * @sq_pgtbl_phys:      dma address of 'sq_pgtbl_virt'
+ * @sq_pgtbl_size:      SQ page table size
+ * @cq_virt:            virtual address of completion queue (CQ) region
+ * @cq_phys:            DMA address of RQ memory region
+ * @cq_mem_size:        CQ size
+ * @cq_prod_qe:         CQ producer entry pointer
+ * @cq_cons_qe:         CQ consumer entry pointer
+ * @cq_first_qe:        virtaul address of first entry in CQ
+ * @cq_last_qe:         virtaul address of last entry in CQ
+ * @cq_prod_idx:        CQ producer index
+ * @cq_cons_idx:        CQ consumer index
+ * @cqe_left:           number cq entry left
+ * @cqe_size:           size of each CQ entry
+ * @cqe_exp_seq_sn:     next expected CQE sequence number
+ * @cq_pgtbl_virt:      page table describing buffer consituting CQ region
+ * @cq_pgtbl_phys:      dma address of 'cq_pgtbl_virt'
+ * @cq_pgtbl_size:    	CQ page table size
+ * @rq_virt:            virtual address of receive queue (RQ) region
+ * @rq_phys:            DMA address of RQ memory region
+ * @rq_mem_size:        RQ size
+ * @rq_prod_qe:         RQ producer entry pointer
+ * @rq_cons_qe:         RQ consumer entry pointer
+ * @rq_first_qe:        virtaul address of first entry in RQ
+ * @rq_last_qe:         virtaul address of last entry in RQ
+ * @rq_prod_idx:        RQ producer index
+ * @rq_cons_idx:        RQ consumer index
+ * @rqe_left:           number rq entry left
+ * @rq_pgtbl_virt:      page table describing buffer consituting RQ region
+ * @rq_pgtbl_phys:      dma address of 'rq_pgtbl_virt'
+ * @rq_pgtbl_size:      RQ page table size
+ *
+ * queue pair (QP) is a per connection shared data structure which is used
+ *	to send work requests (SQ), receive completion notifications (CQ)
+ *	and receive asynchoronous / scsi sense info (RQ). 'qp_info' structure
+ *	below holds queue memory, consumer/producer indexes and page table
+ *	information
+ */
+struct qp_info {
+	void __iomem *ctx_base;
+#define DPM_TRIGER_TYPE			0x40
+
+#define BNX2I_570x_QUE_DB_SIZE		0
+#define BNX2I_5771x_QUE_DB_SIZE		16
+	struct sqe *sq_virt;
+	dma_addr_t sq_phys;
+	u32 sq_mem_size;
+
+	struct sqe *sq_prod_qe;
+	struct sqe *sq_cons_qe;
+	struct sqe *sq_first_qe;
+	struct sqe *sq_last_qe;
+	u16 sq_prod_idx;
+	u16 sq_cons_idx;
+	u32 sqe_left;
+
+	void *sq_pgtbl_virt;
+	dma_addr_t sq_pgtbl_phys;
+	u32 sq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+
+	struct cqe *cq_virt;
+	dma_addr_t cq_phys;
+	u32 cq_mem_size;
+
+	struct cqe *cq_prod_qe;
+	struct cqe *cq_cons_qe;
+	struct cqe *cq_first_qe;
+	struct cqe *cq_last_qe;
+	u16 cq_prod_idx;
+	u16 cq_cons_idx;
+	u32 cqe_left;
+	u32 cqe_size;
+	u32 cqe_exp_seq_sn;
+
+	void *cq_pgtbl_virt;
+	dma_addr_t cq_pgtbl_phys;
+	u32 cq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+
+	struct rqe *rq_virt;
+	dma_addr_t rq_phys;
+	u32 rq_mem_size;
+
+	struct rqe *rq_prod_qe;
+	struct rqe *rq_cons_qe;
+	struct rqe *rq_first_qe;
+	struct rqe *rq_last_qe;
+	u16 rq_prod_idx;
+	u16 rq_cons_idx;
+	u32 rqe_left;
+
+	void *rq_pgtbl_virt;
+	dma_addr_t rq_pgtbl_phys;
+	u32 rq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+};
+
+
+
+/*
+ * CID handles
+ */
+struct ep_handles {
+	u32 fw_cid;
+	u32 drv_iscsi_cid;
+	u16 pg_cid;
+	u16 rsvd;
+};
+
+
+enum {
+	EP_STATE_IDLE                   = 0x0,
+	EP_STATE_PG_OFLD_START          = 0x1,
+	EP_STATE_PG_OFLD_COMPL          = 0x2,
+	EP_STATE_OFLD_START             = 0x4,
+	EP_STATE_OFLD_COMPL             = 0x8,
+	EP_STATE_CONNECT_START          = 0x10,
+	EP_STATE_CONNECT_COMPL          = 0x20,
+	EP_STATE_ULP_UPDATE_START       = 0x40,
+	EP_STATE_ULP_UPDATE_COMPL       = 0x80,
+	EP_STATE_DISCONN_START          = 0x100,
+	EP_STATE_DISCONN_COMPL          = 0x200,
+	EP_STATE_CLEANUP_START          = 0x400,
+	EP_STATE_CLEANUP_CMPL           = 0x800,
+	EP_STATE_TCP_FIN_RCVD           = 0x1000,
+	EP_STATE_TCP_RST_RCVD           = 0x2000,
+	EP_STATE_PG_OFLD_FAILED         = 0x1000000,
+	EP_STATE_ULP_UPDATE_FAILED      = 0x2000000,
+	EP_STATE_CLEANUP_FAILED         = 0x4000000,
+	EP_STATE_OFLD_FAILED            = 0x8000000,
+	EP_STATE_CONNECT_FAILED         = 0x10000000,
+	EP_STATE_DISCONN_TIMEDOUT       = 0x20000000,
+};
+
+/**
+ * struct bnx2i_endpoint - representation of tcp connection in NX2 world
+ *
+ * @link:               list head to link elements
+ * @hba:                adapter to which this connection belongs
+ * @conn:               iscsi connection this EP is linked to
+ * @sess:               iscsi session this EP is linked to
+ * @cm_sk:              cnic sock struct
+ * @hba_age:            age to detect if 'iscsid' issues ep_disconnect()
+ *                      after HBA reset is completed by bnx2i/cnic/bnx2
+ *                      modules
+ * @state:              tracks offload connection state machine
+ * @teardown_mode:      indicates if conn teardown is abortive or orderly
+ * @qp:                 QP information
+ * @ids:                contains chip allocated *context id* & driver assigned
+ *                      *iscsi cid*
+ * @ofld_timer:         offload timer to detect timeout
+ * @ofld_wait:          wait queue
+ *
+ * Endpoint Structure - equivalent of tcp socket structure
+ */
+struct bnx2i_endpoint {
+	struct list_head link;
+	struct bnx2i_hba *hba;
+	struct bnx2i_conn *conn;
+	struct cnic_sock *cm_sk;
+	u32 hba_age;
+	u32 state;
+	unsigned long timestamp;
+	int num_active_cmds;
+
+	struct qp_info qp;
+	struct ep_handles ids;
+		#define ep_iscsi_cid	ids.drv_iscsi_cid
+		#define ep_cid		ids.fw_cid
+		#define ep_pg_cid	ids.pg_cid
+	struct timer_list ofld_timer;
+	wait_queue_head_t ofld_wait;
+};
+
+
+
+/* Global variables */
+extern unsigned int error_mask1, error_mask2;
+extern u64 iscsi_error_mask;
+extern unsigned int en_tcp_dack;
+extern unsigned int event_coal_div;
+
+extern struct scsi_transport_template *bnx2i_scsi_xport_template;
+extern struct iscsi_transport bnx2i_iscsi_transport;
+extern struct cnic_ulp_ops bnx2i_cnic_cb;
+
+extern unsigned int sq_size;
+extern unsigned int rq_size;
+
+extern struct device_attribute *bnx2i_dev_attributes[];
+
+
+
+/*
+ * Function Prototypes
+ */
+extern void bnx2i_identify_device(struct bnx2i_hba *hba);
+extern void bnx2i_register_device(struct bnx2i_hba *hba);
+
+extern void bnx2i_ulp_init(struct cnic_dev *dev);
+extern void bnx2i_ulp_exit(struct cnic_dev *dev);
+extern void bnx2i_start(void *handle);
+extern void bnx2i_stop(void *handle);
+extern void bnx2i_reg_dev_all(void);
+extern void bnx2i_unreg_dev_all(void);
+extern struct bnx2i_hba *get_adapter_list_head(void);
+
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+					  u16 iscsi_cid);
+
+int bnx2i_alloc_ep_pool(void);
+void bnx2i_release_ep_pool(void);
+struct bnx2i_endpoint *bnx2i_ep_ofld_list_next(struct bnx2i_hba *hba);
+struct bnx2i_endpoint *bnx2i_ep_destroy_list_next(struct bnx2i_hba *hba);
+
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic);
+
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic);
+void bnx2i_free_hba(struct bnx2i_hba *hba);
+
+void bnx2i_get_rq_buf(struct bnx2i_conn *conn, char *ptr, int len);
+void bnx2i_put_rq_buf(struct bnx2i_conn *conn, int count);
+
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd);
+
+void bnx2i_drop_session(struct iscsi_cls_session *session);
+
+extern int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba);
+extern int bnx2i_send_iscsi_login(struct bnx2i_conn *conn,
+				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_tmf(struct bnx2i_conn *conn,
+				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *conn,
+				    struct bnx2i_cmd *cmnd);
+extern int bnx2i_send_iscsi_nopout(struct bnx2i_conn *conn,
+				   struct iscsi_task *mtask, u32 ttt,
+				   char *datap, int data_len, int unsol);
+extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
+				   struct iscsi_task *mtask);
+extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
+				       struct bnx2i_cmd *cmd);
+extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+				    struct bnx2i_endpoint *ep);
+
+extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
+			       struct bnx2i_endpoint *ep);
+extern void bnx2i_free_qp_resc(struct bnx2i_hba *hba,
+			       struct bnx2i_endpoint *ep);
+extern void bnx2i_ep_ofld_timer(unsigned long data);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_ofld_list(
+		struct bnx2i_hba *hba, u32 iscsi_cid);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_destroy_list(
+		struct bnx2i_hba *hba, u32 iscsi_cid);
+
+extern int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep);
+extern void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action);
+
+/* Debug related function prototypes */
+extern void bnx2i_print_pend_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_active_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_xmit_pdu_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_recv_state(struct bnx2i_conn *conn);
+
+#endif
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
new file mode 100644
index 00000000000..906cef5cda8
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -0,0 +1,2405 @@
+/* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+/**
+ * bnx2i_get_cid_num - get cid from ep
+ * @ep: 	endpoint pointer
+ *
+ * Only applicable to 57710 family of devices
+ */
+static u32 bnx2i_get_cid_num(struct bnx2i_endpoint *ep)
+{
+	u32 cid;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		cid = ep->ep_cid;
+	else
+		cid = GET_CID_NUM(ep->ep_cid);
+	return cid;
+}
+
+
+/**
+ * bnx2i_adjust_qp_size - Adjust SQ/RQ/CQ size for 57710 device type
+ * @hba: 		Adapter for which adjustments is to be made
+ *
+ * Only applicable to 57710 family of devices
+ */
+static void bnx2i_adjust_qp_size(struct bnx2i_hba *hba)
+{
+	u32 num_elements_per_pg;
+
+	if (test_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type) ||
+	    test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type) ||
+	    test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+		if (!is_power_of_2(hba->max_sqes))
+			hba->max_sqes = rounddown_pow_of_two(hba->max_sqes);
+
+		if (!is_power_of_2(hba->max_rqes))
+			hba->max_rqes = rounddown_pow_of_two(hba->max_rqes);
+	}
+
+	/* Adjust each queue size if the user selection does not
+	 * yield integral num of page buffers
+	 */
+	/* adjust SQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+	if (hba->max_sqes < num_elements_per_pg)
+		hba->max_sqes = num_elements_per_pg;
+	else if (hba->max_sqes % num_elements_per_pg)
+		hba->max_sqes = (hba->max_sqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+
+	/* adjust CQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_CQE_SIZE;
+	if (hba->max_cqes < num_elements_per_pg)
+		hba->max_cqes = num_elements_per_pg;
+	else if (hba->max_cqes % num_elements_per_pg)
+		hba->max_cqes = (hba->max_cqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+
+	/* adjust RQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_RQ_WQE_SIZE;
+	if (hba->max_rqes < num_elements_per_pg)
+		hba->max_rqes = num_elements_per_pg;
+	else if (hba->max_rqes % num_elements_per_pg)
+		hba->max_rqes = (hba->max_rqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+}
+
+
+/**
+ * bnx2i_get_link_state - get network interface link state
+ * @hba:	adapter instance pointer
+ *
+ * updates adapter structure flag based on netdev state
+ */
+static void bnx2i_get_link_state(struct bnx2i_hba *hba)
+{
+	if (test_bit(__LINK_STATE_NOCARRIER, &hba->netdev->state))
+		set_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+	else
+		clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_iscsi_license_error - displays iscsi license related error message
+ * @hba:		adapter instance pointer
+ * @error_code:		error classification
+ *
+ * Puts out an error log when driver is unable to offload iscsi connection
+ *	due to license restrictions
+ */
+static void bnx2i_iscsi_license_error(struct bnx2i_hba *hba, u32 error_code)
+{
+	if (error_code == ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED)
+		/* iSCSI offload not supported on this device */
+		printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
+				hba->netdev->name);
+	if (error_code == ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED)
+		/* iSCSI offload not supported on this LOM device */
+		printk(KERN_ERR "bnx2i: LOM is not enable to "
+				"offload iSCSI connections, dev=%s\n",
+				hba->netdev->name);
+	set_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_arm_cq_event_coalescing - arms CQ to enable EQ notification
+ * @ep:		endpoint (transport indentifier) structure
+ * @action:	action, ARM or DISARM. For now only ARM_CQE is used
+ *
+ * Arm'ing CQ will enable chip to generate global EQ events inorder to interrupt
+ *	the driver. EQ event is generated CQ index is hit or at least 1 CQ is
+ *	outstanding and on chip timer expires
+ */
+void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
+{
+	struct bnx2i_5771x_cq_db *cq_db;
+	u16 cq_index;
+
+	if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		return;
+
+	if (action == CNIC_ARM_CQE) {
+		cq_index = ep->qp.cqe_exp_seq_sn +
+			   ep->num_active_cmds / event_coal_div;
+		cq_index %= (ep->qp.cqe_size * 2 + 1);
+		if (!cq_index) {
+			cq_index = 1;
+			cq_db = (struct bnx2i_5771x_cq_db *)
+					ep->qp.cq_pgtbl_virt;
+			cq_db->sqn[0] = cq_index;
+		}
+	}
+}
+
+
+/**
+ * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
+ * @conn:		iscsi connection on which RQ event occured
+ * @ptr:		driver buffer to which RQ buffer contents is to
+ *			be copied
+ * @len:		length of valid data inside RQ buf
+ *
+ * Copies RQ buffer contents from shared (DMA'able) memory region to
+ *	driver buffer. RQ is used to DMA unsolicitated iscsi pdu's and
+ *	scsi sense info
+ */
+void bnx2i_get_rq_buf(struct bnx2i_conn *bnx2i_conn, char *ptr, int len)
+{
+	if (!bnx2i_conn->ep->qp.rqe_left)
+		return;
+
+	bnx2i_conn->ep->qp.rqe_left--;
+	memcpy(ptr, (u8 *) bnx2i_conn->ep->qp.rq_cons_qe, len);
+	if (bnx2i_conn->ep->qp.rq_cons_qe == bnx2i_conn->ep->qp.rq_last_qe) {
+		bnx2i_conn->ep->qp.rq_cons_qe = bnx2i_conn->ep->qp.rq_first_qe;
+		bnx2i_conn->ep->qp.rq_cons_idx = 0;
+	} else {
+		bnx2i_conn->ep->qp.rq_cons_qe++;
+		bnx2i_conn->ep->qp.rq_cons_idx++;
+	}
+}
+
+
+static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn)
+{
+	struct bnx2i_5771x_dbell dbell;
+	u32 msg;
+
+	memset(&dbell, 0, sizeof(dbell));
+	dbell.dbell.header = (B577XX_ISCSI_CONNECTION_TYPE <<
+			      B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT);
+	msg = *((u32 *)&dbell);
+	/* TODO : get doorbell register mapping */
+	writel(cpu_to_le32(msg), conn->ep->qp.ctx_base);
+}
+
+
+/**
+ * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell
+ * @conn:	iscsi connection on which event to post
+ * @count:	number of RQ buffer being posted to chip
+ *
+ * No need to ring hardware doorbell for 57710 family of devices
+ */
+void bnx2i_put_rq_buf(struct bnx2i_conn *bnx2i_conn, int count)
+{
+	struct bnx2i_5771x_sq_rq_db *rq_db;
+	u16 hi_bit = (bnx2i_conn->ep->qp.rq_prod_idx & 0x8000);
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+	ep->qp.rqe_left += count;
+	ep->qp.rq_prod_idx &= 0x7FFF;
+	ep->qp.rq_prod_idx += count;
+
+	if (ep->qp.rq_prod_idx > bnx2i_conn->hba->max_rqes) {
+		ep->qp.rq_prod_idx %= bnx2i_conn->hba->max_rqes;
+		if (!hi_bit)
+			ep->qp.rq_prod_idx |= 0x8000;
+	} else
+		ep->qp.rq_prod_idx |= hi_bit;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		rq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.rq_pgtbl_virt;
+		rq_db->prod_idx = ep->qp.rq_prod_idx;
+		/* no need to ring hardware doorbell for 57710 */
+	} else {
+		writew(ep->qp.rq_prod_idx,
+		       ep->qp.ctx_base + CNIC_RECV_DOORBELL);
+	}
+	mmiowb();
+}
+
+
+/**
+ * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
+ * @conn: 		iscsi connection to which new SQ entries belong
+ * @count: 		number of SQ WQEs to post
+ *
+ * SQ DB is updated in host memory and TX Doorbell is rung for 57710 family
+ *	of devices. For 5706/5708/5709 new SQ WQE count is written into the
+ *	doorbell register
+ */
+static void bnx2i_ring_sq_dbell(struct bnx2i_conn *bnx2i_conn, int count)
+{
+	struct bnx2i_5771x_sq_rq_db *sq_db;
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+	ep->num_active_cmds++;
+	wmb();	/* flush SQ WQE memory before the doorbell is rung */
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		sq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.sq_pgtbl_virt;
+		sq_db->prod_idx = ep->qp.sq_prod_idx;
+		bnx2i_ring_577xx_doorbell(bnx2i_conn);
+	} else
+		writew(count, ep->qp.ctx_base + CNIC_SEND_DOORBELL);
+
+	mmiowb(); /* flush posted PCI writes */
+}
+
+
+/**
+ * bnx2i_ring_dbell_update_sq_params - update SQ driver parameters
+ * @conn:	iscsi connection to which new SQ entries belong
+ * @count:	number of SQ WQEs to post
+ *
+ * this routine will update SQ driver parameters and ring the doorbell
+ */
+static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn,
+					      int count)
+{
+	int tmp_cnt;
+
+	if (count == 1) {
+		if (bnx2i_conn->ep->qp.sq_prod_qe ==
+		    bnx2i_conn->ep->qp.sq_last_qe)
+			bnx2i_conn->ep->qp.sq_prod_qe =
+						bnx2i_conn->ep->qp.sq_first_qe;
+		else
+			bnx2i_conn->ep->qp.sq_prod_qe++;
+	} else {
+		if ((bnx2i_conn->ep->qp.sq_prod_qe + count) <=
+		    bnx2i_conn->ep->qp.sq_last_qe)
+			bnx2i_conn->ep->qp.sq_prod_qe += count;
+		else {
+			tmp_cnt = bnx2i_conn->ep->qp.sq_last_qe -
+				bnx2i_conn->ep->qp.sq_prod_qe;
+			bnx2i_conn->ep->qp.sq_prod_qe =
+				&bnx2i_conn->ep->qp.sq_first_qe[count -
+								(tmp_cnt + 1)];
+		}
+	}
+	bnx2i_conn->ep->qp.sq_prod_idx += count;
+	/* Ring the doorbell */
+	bnx2i_ring_sq_dbell(bnx2i_conn, bnx2i_conn->ep->qp.sq_prod_idx);
+}
+
+
+/**
+ * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
+			   struct iscsi_task *task)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_login_request *login_wqe;
+	struct iscsi_login *login_hdr;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	login_hdr = (struct iscsi_login *)task->hdr;
+	login_wqe = (struct bnx2i_login_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+
+	login_wqe->op_code = login_hdr->opcode;
+	login_wqe->op_attr = login_hdr->flags;
+	login_wqe->version_max = login_hdr->max_version;
+	login_wqe->version_min = login_hdr->min_version;
+	login_wqe->data_length = ntoh24(login_hdr->dlength);
+	login_wqe->isid_lo = *((u32 *) login_hdr->isid);
+	login_wqe->isid_hi = *((u16 *) login_hdr->isid + 2);
+	login_wqe->tsih = login_hdr->tsih;
+	login_wqe->itt = task->itt |
+		(ISCSI_TASK_TYPE_MPATH << ISCSI_LOGIN_REQUEST_TYPE_SHIFT);
+	login_wqe->cid = login_hdr->cid;
+
+	login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn);
+	login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn);
+
+	login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
+	login_wqe->resp_bd_list_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
+
+	dword = ((1 << ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT) |
+		 (bnx2i_conn->gen_pdu.resp_buf_size <<
+		  ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
+	login_wqe->resp_buffer = dword;
+	login_wqe->flags = 0;
+	login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
+	login_wqe->bd_list_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
+	login_wqe->num_bds = 1;
+	login_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware
+ * @conn:	iscsi connection
+ * @mtask:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
+			 struct iscsi_task *mtask)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_tm *tmfabort_hdr;
+	struct scsi_cmnd *ref_sc;
+	struct iscsi_task *ctask;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_tmf_request *tmfabort_wqe;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
+	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
+	tmfabort_wqe = (struct bnx2i_tmf_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+
+	tmfabort_wqe->op_code = tmfabort_hdr->opcode;
+	tmfabort_wqe->op_attr = 0;
+	tmfabort_wqe->op_attr =
+		ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
+	tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
+	tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
+
+	tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
+	tmfabort_wqe->reserved2 = 0;
+	tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
+
+	ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
+	if (!ctask || ctask->sc)
+		/*
+		 * the iscsi layer must have completed the cmd while this
+		 * was starting up.
+		 */
+		return 0;
+	ref_sc = ctask->sc;
+
+	if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
+		dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	else
+		dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
+
+	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+	tmfabort_wqe->bd_list_addr_hi = (u32)
+				((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+	tmfabort_wqe->num_bds = 1;
+	tmfabort_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI SCSI-CMD request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn,
+			     struct bnx2i_cmd *cmd)
+{
+	struct bnx2i_cmd_request *scsi_cmd_wqe;
+
+	scsi_cmd_wqe = (struct bnx2i_cmd_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+	memcpy(scsi_cmd_wqe, &cmd->req, sizeof(struct bnx2i_cmd_request));
+	scsi_cmd_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware
+ * @conn:		iscsi connection
+ * @cmd:		driver command structure which is requesting
+ *			a WQE to sent to chip for further processing
+ * @ttt:		TTT to be used when building pdu header
+ * @datap:		payload buffer pointer
+ * @data_len:		payload data length
+ * @unsol:		indicated whether nopout pdu is unsolicited pdu or
+ *			in response to target's NOPIN w/ TTT != FFFFFFFF
+ *
+ * prepare and post a nopout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
+			    struct iscsi_task *task, u32 ttt,
+			    char *datap, int data_len, int unsol)
+{
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_nop_out_request *nopout_wqe;
+	struct iscsi_nopout *nopout_hdr;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	nopout_hdr = (struct iscsi_nopout *)task->hdr;
+	nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
+	nopout_wqe->op_code = nopout_hdr->opcode;
+	nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
+	memcpy(nopout_wqe->lun, nopout_hdr->lun, 8);
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		u32 tmp = nopout_hdr->lun[0];
+		/* 57710 requires LUN field to be swapped */
+		nopout_hdr->lun[0] = nopout_hdr->lun[1];
+		nopout_hdr->lun[1] = tmp;
+	}
+
+	nopout_wqe->itt = ((u16)task->itt |
+			   (ISCSI_TASK_TYPE_MPATH <<
+			    ISCSI_TMF_REQUEST_TYPE_SHIFT));
+	nopout_wqe->ttt = ttt;
+	nopout_wqe->flags = 0;
+	if (!unsol)
+		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+	else if (nopout_hdr->itt == RESERVED_ITT)
+		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+
+	nopout_wqe->cmd_sn = be32_to_cpu(nopout_hdr->cmdsn);
+	nopout_wqe->data_length = data_len;
+	if (data_len) {
+		/* handle payload data, not required in first release */
+		printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
+	} else {
+		nopout_wqe->bd_list_addr_lo = (u32)
+					bnx2i_conn->hba->mp_bd_dma;
+		nopout_wqe->bd_list_addr_hi =
+			(u32) ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+		nopout_wqe->num_bds = 1;
+	}
+	nopout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
+ * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post logout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
+			    struct iscsi_task *task)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_logout_request *logout_wqe;
+	struct iscsi_logout *logout_hdr;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	logout_hdr = (struct iscsi_logout *)task->hdr;
+
+	logout_wqe = (struct bnx2i_logout_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+	memset(logout_wqe, 0x00, sizeof(struct bnx2i_logout_request));
+
+	logout_wqe->op_code = logout_hdr->opcode;
+	logout_wqe->cmd_sn = be32_to_cpu(logout_hdr->cmdsn);
+	logout_wqe->op_attr =
+			logout_hdr->flags | ISCSI_LOGOUT_REQUEST_ALWAYS_ONE;
+	logout_wqe->itt = ((u16)task->itt |
+			   (ISCSI_TASK_TYPE_MPATH <<
+			    ISCSI_LOGOUT_REQUEST_TYPE_SHIFT));
+	logout_wqe->data_length = 0;
+	logout_wqe->cid = 0;
+
+	logout_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+	logout_wqe->bd_list_addr_hi = (u32)
+				((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+	logout_wqe->num_bds = 1;
+	logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
+ * bnx2i_update_iscsi_conn - post iSCSI logout request WQE to hardware
+ * @conn:	iscsi connection which requires iscsi parameter update
+ *
+ * sends down iSCSI Conn Update request to move iSCSI conn to FFP
+ */
+void bnx2i_update_iscsi_conn(struct iscsi_conn *conn)
+{
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_hba *hba = bnx2i_conn->hba;
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_update *update_wqe;
+	struct iscsi_kwqe_conn_update conn_update_kwqe;
+
+	update_wqe = &conn_update_kwqe;
+
+	update_wqe->hdr.op_code = ISCSI_KWQE_OPCODE_UPDATE_CONN;
+	update_wqe->hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	/* 5771x requires conn context id to be passed as is */
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_conn->ep->hba->cnic_dev_type))
+		update_wqe->context_id = bnx2i_conn->ep->ep_cid;
+	else
+		update_wqe->context_id = (bnx2i_conn->ep->ep_cid >> 7);
+	update_wqe->conn_flags = 0;
+	if (conn->hdrdgst_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST;
+	if (conn->datadgst_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST;
+	if (conn->session->initial_r2t_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T;
+	if (conn->session->imm_data_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA;
+
+	update_wqe->max_send_pdu_length = conn->max_xmit_dlength;
+	update_wqe->max_recv_pdu_length = conn->max_recv_dlength;
+	update_wqe->first_burst_length = conn->session->first_burst;
+	update_wqe->max_burst_length = conn->session->max_burst;
+	update_wqe->exp_stat_sn = conn->exp_statsn;
+	update_wqe->max_outstanding_r2ts = conn->session->max_r2t;
+	update_wqe->session_error_recovery_level = conn->session->erl;
+	iscsi_conn_printk(KERN_ALERT, conn,
+			  "bnx2i: conn update - MBL 0x%x FBL 0x%x"
+			  "MRDSL_I 0x%x MRDSL_T 0x%x \n",
+			  update_wqe->max_burst_length,
+			  update_wqe->first_burst_length,
+			  update_wqe->max_recv_pdu_length,
+			  update_wqe->max_send_pdu_length);
+
+	kwqe_arr[0] = (struct kwqe *) update_wqe;
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_ep_ofld_timer - post iSCSI logout request WQE to hardware
+ * @data:	endpoint (transport handle) structure pointer
+ *
+ * routine to handle connection offload/destroy request timeout
+ */
+void bnx2i_ep_ofld_timer(unsigned long data)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) data;
+
+	if (ep->state == EP_STATE_OFLD_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
+		ep->state = EP_STATE_OFLD_FAILED;
+	} else if (ep->state == EP_STATE_DISCONN_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
+		ep->state = EP_STATE_DISCONN_TIMEDOUT;
+	} else if (ep->state == EP_STATE_CLEANUP_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
+		ep->state = EP_STATE_CLEANUP_FAILED;
+	}
+
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+static int bnx2i_power_of2(u32 val)
+{
+	u32 power = 0;
+	if (val & (val - 1))
+		return power;
+	val--;
+	while (val) {
+		val = val >> 1;
+		power++;
+	}
+	return power;
+}
+
+
+/**
+ * bnx2i_send_cmd_cleanup_req - send iscsi cmd context clean-up request
+ * @hba:	adapter structure pointer
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+	struct bnx2i_cleanup_request *cmd_cleanup;
+
+	cmd_cleanup =
+		(struct bnx2i_cleanup_request *)cmd->conn->ep->qp.sq_prod_qe;
+	memset(cmd_cleanup, 0x00, sizeof(struct bnx2i_cleanup_request));
+
+	cmd_cleanup->op_code = ISCSI_OPCODE_CLEANUP_REQUEST;
+	cmd_cleanup->itt = cmd->req.itt;
+	cmd_cleanup->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(cmd->conn, 1);
+}
+
+
+/**
+ * bnx2i_send_conn_destroy - initiates iscsi connection teardown process
+ * @hba:	adapter structure pointer
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
+ * 	iscsi connection context clean-up process
+ */
+void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_destroy conn_cleanup;
+
+	memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
+
+	conn_cleanup.hdr.op_code = ISCSI_KWQE_OPCODE_DESTROY_CONN;
+	conn_cleanup.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+	/* 5771x requires conn context id to be passed as is */
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		conn_cleanup.context_id = ep->ep_cid;
+	else
+		conn_cleanup.context_id = (ep->ep_cid >> 7);
+
+	conn_cleanup.reserved0 = (u16)ep->ep_iscsi_cid;
+
+	kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_570x_send_conn_ofld_req - initiates iscsi conn context setup process
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					  struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_offload1 ofld_req1;
+	struct iscsi_kwqe_conn_offload2 ofld_req2;
+	dma_addr_t dma_addr;
+	int num_kwqes = 2;
+	u32 *ptbl;
+
+	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+	ofld_req1.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+	dma_addr = ep->qp.sq_pgtbl_phys;
+	ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	dma_addr = ep->qp.cq_pgtbl_phys;
+	ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+	ofld_req2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	dma_addr = ep->qp.rq_pgtbl_phys;
+	ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+
+	ofld_req2.sq_first_pte.hi = *ptbl++;
+	ofld_req2.sq_first_pte.lo = *ptbl;
+
+	ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+	ofld_req2.cq_first_pte.hi = *ptbl++;
+	ofld_req2.cq_first_pte.lo = *ptbl;
+
+	kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+	kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+	ofld_req2.num_additional_wqes = 0;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+
+/**
+ * bnx2i_5771x_send_conn_ofld_req - initiates iscsi connection context creation
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					   struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[5];
+	struct iscsi_kwqe_conn_offload1 ofld_req1;
+	struct iscsi_kwqe_conn_offload2 ofld_req2;
+	struct iscsi_kwqe_conn_offload3 ofld_req3[1];
+	dma_addr_t dma_addr;
+	int num_kwqes = 2;
+	u32 *ptbl;
+
+	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+	ofld_req1.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+	dma_addr = ep->qp.sq_pgtbl_phys + ISCSI_SQ_DB_SIZE;
+	ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	dma_addr = ep->qp.cq_pgtbl_phys + ISCSI_CQ_DB_SIZE;
+	ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+	ofld_req2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	dma_addr = ep->qp.rq_pgtbl_phys + ISCSI_RQ_DB_SIZE;
+	ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+	ofld_req2.sq_first_pte.hi = *ptbl++;
+	ofld_req2.sq_first_pte.lo = *ptbl;
+
+	ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+	ofld_req2.cq_first_pte.hi = *ptbl++;
+	ofld_req2.cq_first_pte.lo = *ptbl;
+
+	kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+	kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+
+	ofld_req2.num_additional_wqes = 1;
+	memset(ofld_req3, 0x00, sizeof(ofld_req3[0]));
+	ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+	ofld_req3[0].qp_first_pte[0].hi = *ptbl++;
+	ofld_req3[0].qp_first_pte[0].lo = *ptbl;
+
+	kwqe_arr[2] = (struct kwqe *) ofld_req3;
+	/* need if we decide to go with multiple KCQE's per conn */
+	num_kwqes += 1;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+/**
+ * bnx2i_send_conn_ofld_req - initiates iscsi connection context setup process
+ *
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		bnx2i_5771x_send_conn_ofld_req(hba, ep);
+	else
+		bnx2i_570x_send_conn_ofld_req(hba, ep);
+}
+
+
+/**
+ * setup_qp_page_tables - iscsi QP page table setup function
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * Sets up page tables for SQ/RQ/CQ, 1G/sec (5706/5708/5709) devices requires
+ * 	64-bit address in big endian format. Whereas 10G/sec (57710) requires
+ * 	PT in little endian format
+ */
+static void setup_qp_page_tables(struct bnx2i_endpoint *ep)
+{
+	int num_pages;
+	u32 *ptbl;
+	dma_addr_t page;
+	int cnic_dev_10g;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		cnic_dev_10g = 1;
+	else
+		cnic_dev_10g = 0;
+
+	/* SQ page table */
+	memset(ep->qp.sq_pgtbl_virt, 0, ep->qp.sq_pgtbl_size);
+	num_pages = ep->qp.sq_mem_size / PAGE_SIZE;
+	page = ep->qp.sq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+
+	/* RQ page table */
+	memset(ep->qp.rq_pgtbl_virt, 0, ep->qp.rq_pgtbl_size);
+	num_pages = ep->qp.rq_mem_size / PAGE_SIZE;
+	page = ep->qp.rq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.rq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+
+	/* CQ page table */
+	memset(ep->qp.cq_pgtbl_virt, 0, ep->qp.cq_pgtbl_size);
+	num_pages = ep->qp.cq_mem_size / PAGE_SIZE;
+	page = ep->qp.cq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+}
+
+
+/**
+ * bnx2i_alloc_qp_resc - allocates required resources for QP.
+ * @hba:	adapter structure pointer
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * Allocate QP (transport layer for iSCSI connection) resources, DMA'able
+ *	memory for SQ/RQ/CQ and page tables. EP structure elements such
+ *	as producer/consumer indexes/pointers, queue sizes and page table
+ *	contents are setup
+ */
+int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	struct bnx2i_5771x_cq_db *cq_db;
+
+	ep->hba = hba;
+	ep->conn = NULL;
+	ep->ep_cid = ep->ep_iscsi_cid = ep->ep_pg_cid = 0;
+
+	/* Allocate page table memory for SQ which is page aligned */
+	ep->qp.sq_mem_size = hba->max_sqes * BNX2I_SQ_WQE_SIZE;
+	ep->qp.sq_mem_size =
+		(ep->qp.sq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.sq_pgtbl_size =
+		(ep->qp.sq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.sq_pgtbl_size =
+		(ep->qp.sq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.sq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+				   &ep->qp.sq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.sq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
+				  ep->qp.sq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual SQ element */
+	ep->qp.sq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+				   &ep->qp.sq_phys, GFP_KERNEL);
+	if (!ep->qp.sq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
+				  ep->qp.sq_mem_size);
+		goto mem_alloc_err;
+	}
+
+	memset(ep->qp.sq_virt, 0x00, ep->qp.sq_mem_size);
+	ep->qp.sq_first_qe = ep->qp.sq_virt;
+	ep->qp.sq_prod_qe = ep->qp.sq_first_qe;
+	ep->qp.sq_cons_qe = ep->qp.sq_first_qe;
+	ep->qp.sq_last_qe = &ep->qp.sq_first_qe[hba->max_sqes - 1];
+	ep->qp.sq_prod_idx = 0;
+	ep->qp.sq_cons_idx = 0;
+	ep->qp.sqe_left = hba->max_sqes;
+
+	/* Allocate page table memory for CQ which is page aligned */
+	ep->qp.cq_mem_size = hba->max_cqes * BNX2I_CQE_SIZE;
+	ep->qp.cq_mem_size =
+		(ep->qp.cq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.cq_pgtbl_size =
+		(ep->qp.cq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.cq_pgtbl_size =
+		(ep->qp.cq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.cq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+				   &ep->qp.cq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.cq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
+				  ep->qp.cq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual CQ element */
+	ep->qp.cq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+				   &ep->qp.cq_phys, GFP_KERNEL);
+	if (!ep->qp.cq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
+				  ep->qp.cq_mem_size);
+		goto mem_alloc_err;
+	}
+	memset(ep->qp.cq_virt, 0x00, ep->qp.cq_mem_size);
+
+	ep->qp.cq_first_qe = ep->qp.cq_virt;
+	ep->qp.cq_prod_qe = ep->qp.cq_first_qe;
+	ep->qp.cq_cons_qe = ep->qp.cq_first_qe;
+	ep->qp.cq_last_qe = &ep->qp.cq_first_qe[hba->max_cqes - 1];
+	ep->qp.cq_prod_idx = 0;
+	ep->qp.cq_cons_idx = 0;
+	ep->qp.cqe_left = hba->max_cqes;
+	ep->qp.cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+	ep->qp.cqe_size = hba->max_cqes;
+
+	/* Invalidate all EQ CQE index, req only for 57710 */
+	cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+	memset(cq_db->sqn, 0xFF, sizeof(cq_db->sqn[0]) * BNX2X_MAX_CQS);
+
+	/* Allocate page table memory for RQ which is page aligned */
+	ep->qp.rq_mem_size = hba->max_rqes * BNX2I_RQ_WQE_SIZE;
+	ep->qp.rq_mem_size =
+		(ep->qp.rq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.rq_pgtbl_size =
+		(ep->qp.rq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.rq_pgtbl_size =
+		(ep->qp.rq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.rq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+				   &ep->qp.rq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.rq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
+				  ep->qp.rq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual RQ element */
+	ep->qp.rq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+				   &ep->qp.rq_phys, GFP_KERNEL);
+	if (!ep->qp.rq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
+				  ep->qp.rq_mem_size);
+		goto mem_alloc_err;
+	}
+
+	ep->qp.rq_first_qe = ep->qp.rq_virt;
+	ep->qp.rq_prod_qe = ep->qp.rq_first_qe;
+	ep->qp.rq_cons_qe = ep->qp.rq_first_qe;
+	ep->qp.rq_last_qe = &ep->qp.rq_first_qe[hba->max_rqes - 1];
+	ep->qp.rq_prod_idx = 0x8000;
+	ep->qp.rq_cons_idx = 0;
+	ep->qp.rqe_left = hba->max_rqes;
+
+	setup_qp_page_tables(ep);
+
+	return 0;
+
+mem_alloc_err:
+	bnx2i_free_qp_resc(hba, ep);
+	return -ENOMEM;
+}
+
+
+
+/**
+ * bnx2i_free_qp_resc - free memory resources held by QP
+ * @hba:	adapter structure pointer
+ * @ep:	endpoint (transport indentifier) structure
+ *
+ * Free QP resources - SQ/RQ/CQ memory and page tables.
+ */
+void bnx2i_free_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	if (ep->qp.ctx_base) {
+		iounmap(ep->qp.ctx_base);
+		ep->qp.ctx_base = NULL;
+	}
+	/* Free SQ mem */
+	if (ep->qp.sq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+				  ep->qp.sq_pgtbl_virt, ep->qp.sq_pgtbl_phys);
+		ep->qp.sq_pgtbl_virt = NULL;
+		ep->qp.sq_pgtbl_phys = 0;
+	}
+	if (ep->qp.sq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+				  ep->qp.sq_virt, ep->qp.sq_phys);
+		ep->qp.sq_virt = NULL;
+		ep->qp.sq_phys = 0;
+	}
+
+	/* Free RQ mem */
+	if (ep->qp.rq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+				  ep->qp.rq_pgtbl_virt, ep->qp.rq_pgtbl_phys);
+		ep->qp.rq_pgtbl_virt = NULL;
+		ep->qp.rq_pgtbl_phys = 0;
+	}
+	if (ep->qp.rq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+				  ep->qp.rq_virt, ep->qp.rq_phys);
+		ep->qp.rq_virt = NULL;
+		ep->qp.rq_phys = 0;
+	}
+
+	/* Free CQ mem */
+	if (ep->qp.cq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+				  ep->qp.cq_pgtbl_virt, ep->qp.cq_pgtbl_phys);
+		ep->qp.cq_pgtbl_virt = NULL;
+		ep->qp.cq_pgtbl_phys = 0;
+	}
+	if (ep->qp.cq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+				  ep->qp.cq_virt, ep->qp.cq_phys);
+		ep->qp.cq_virt = NULL;
+		ep->qp.cq_phys = 0;
+	}
+}
+
+
+/**
+ * bnx2i_send_fw_iscsi_init_msg - initiates initial handshake with iscsi f/w
+ * @hba:	adapter structure pointer
+ *
+ * Send down iscsi_init KWQEs which initiates the initial handshake with the f/w
+ * 	This results in iSCSi support validation and on-chip context manager
+ * 	initialization.  Firmware completes this handshake with a CQE carrying
+ * 	the result of iscsi support validation. Parameter carried by
+ * 	iscsi init request determines the number of offloaded connection and
+ * 	tolerance level for iscsi protocol violation this hba/chip can support
+ */
+int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
+{
+	struct kwqe *kwqe_arr[3];
+	struct iscsi_kwqe_init1 iscsi_init;
+	struct iscsi_kwqe_init2 iscsi_init2;
+	int rc = 0;
+	u64 mask64;
+
+	bnx2i_adjust_qp_size(hba);
+
+	iscsi_init.flags =
+		ISCSI_PAGE_SIZE_4K << ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT;
+	if (en_tcp_dack)
+		iscsi_init.flags |= ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE;
+	iscsi_init.reserved0 = 0;
+	iscsi_init.num_cqs = 1;
+	iscsi_init.hdr.op_code = ISCSI_KWQE_OPCODE_INIT1;
+	iscsi_init.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	iscsi_init.dummy_buffer_addr_lo = (u32) hba->dummy_buf_dma;
+	iscsi_init.dummy_buffer_addr_hi =
+		(u32) ((u64) hba->dummy_buf_dma >> 32);
+
+	hba->ctx_ccell_tasks =
+			((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16));
+	iscsi_init.num_ccells_per_conn = hba->num_ccell;
+	iscsi_init.num_tasks_per_conn = hba->max_sqes;
+	iscsi_init.sq_wqes_per_page = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+	iscsi_init.sq_num_wqes = hba->max_sqes;
+	iscsi_init.cq_log_wqes_per_page =
+		(u8) bnx2i_power_of2(PAGE_SIZE / BNX2I_CQE_SIZE);
+	iscsi_init.cq_num_wqes = hba->max_cqes;
+	iscsi_init.cq_num_pages = (hba->max_cqes * BNX2I_CQE_SIZE +
+				   (PAGE_SIZE - 1)) / PAGE_SIZE;
+	iscsi_init.sq_num_pages = (hba->max_sqes * BNX2I_SQ_WQE_SIZE +
+				   (PAGE_SIZE - 1)) / PAGE_SIZE;
+	iscsi_init.rq_buffer_size = BNX2I_RQ_WQE_SIZE;
+	iscsi_init.rq_num_wqes = hba->max_rqes;
+
+
+	iscsi_init2.hdr.op_code = ISCSI_KWQE_OPCODE_INIT2;
+	iscsi_init2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+	iscsi_init2.max_cq_sqn = hba->max_cqes * 2 + 1;
+	mask64 = 0x0ULL;
+	mask64 |= (
+		/* CISCO MDS */
+		(1UL <<
+		  ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV) |
+		/* HP MSA1510i */
+		(1UL <<
+		  ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) |
+		/* EMC */
+		(1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN));
+	if (error_mask1)
+		iscsi_init2.error_bit_map[0] = error_mask1;
+	else
+		iscsi_init2.error_bit_map[0] = (u32) mask64;
+
+	if (error_mask2)
+		iscsi_init2.error_bit_map[1] = error_mask2;
+	else
+		iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32);
+
+	iscsi_error_mask = mask64;
+
+	kwqe_arr[0] = (struct kwqe *) &iscsi_init;
+	kwqe_arr[1] = (struct kwqe *) &iscsi_init2;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 2);
+	return rc;
+}
+
+
+/**
+ * bnx2i_process_scsi_cmd_resp - this function handles scsi cmd completion.
+ * @conn:	iscsi connection
+ * @cqe:	pointer to newly DMA'ed CQE entry for processing
+ *
+ * process SCSI CMD Response CQE & complete the request to SCSI-ML
+ */
+static int bnx2i_process_scsi_cmd_resp(struct iscsi_session *session,
+				       struct bnx2i_conn *bnx2i_conn,
+				       struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_cmd_response *resp_cqe;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct iscsi_task *task;
+	struct iscsi_cmd_rsp *hdr;
+	u32 datalen = 0;
+
+	resp_cqe = (struct bnx2i_cmd_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 resp_cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
+	if (!task)
+		goto fail;
+
+	bnx2i_cmd = task->dd_data;
+
+	if (bnx2i_cmd->req.op_attr & ISCSI_CMD_REQUEST_READ) {
+		conn->datain_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_data_outs;
+		conn->rxdata_octets +=
+			bnx2i_cmd->req.total_data_transfer_length;
+	} else {
+		conn->dataout_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_data_outs;
+		conn->r2t_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_r2ts;
+		conn->txdata_octets +=
+			bnx2i_cmd->req.total_data_transfer_length;
+	}
+	bnx2i_iscsi_unmap_sg_list(bnx2i_cmd);
+
+	hdr = (struct iscsi_cmd_rsp *)task->hdr;
+	resp_cqe = (struct bnx2i_cmd_response *)cqe;
+	hdr->opcode = resp_cqe->op_code;
+	hdr->max_cmdsn = cpu_to_be32(resp_cqe->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(resp_cqe->exp_cmd_sn);
+	hdr->response = resp_cqe->response;
+	hdr->cmd_status = resp_cqe->status;
+	hdr->flags = resp_cqe->response_flags;
+	hdr->residual_count = cpu_to_be32(resp_cqe->residual_count);
+
+	if (resp_cqe->op_code == ISCSI_OP_SCSI_DATA_IN)
+		goto done;
+
+	if (resp_cqe->status == SAM_STAT_CHECK_CONDITION) {
+		datalen = resp_cqe->data_length;
+		if (datalen < 2)
+			goto done;
+
+		if (datalen > BNX2I_RQ_WQE_SIZE) {
+			iscsi_conn_printk(KERN_ERR, conn,
+					  "sense data len %d > RQ sz\n",
+					  datalen);
+			datalen = BNX2I_RQ_WQE_SIZE;
+		} else if (datalen > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+			iscsi_conn_printk(KERN_ERR, conn,
+					  "sense data len %d > conn data\n",
+					  datalen);
+			datalen = ISCSI_DEF_MAX_RECV_SEG_LEN;
+		}
+
+		bnx2i_get_rq_buf(bnx2i_cmd->conn, conn->data, datalen);
+		bnx2i_put_rq_buf(bnx2i_cmd->conn, 1);
+	}
+
+done:
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr,
+			     conn->data, datalen);
+fail:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_process_login_resp - this function handles iscsi login response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process Login Response CQE & complete it to open-iscsi user daemon
+ */
+static int bnx2i_process_login_resp(struct iscsi_session *session,
+				    struct bnx2i_conn *bnx2i_conn,
+				    struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_login_response *login;
+	struct iscsi_login_rsp *resp_hdr;
+	int pld_len;
+	int pad_len;
+
+	login = (struct bnx2i_login_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 login->itt & ISCSI_LOGIN_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_login_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = login->op_code;
+	resp_hdr->flags = login->response_flags;
+	resp_hdr->max_version = login->version_max;
+	resp_hdr->active_version = login->version_active;;
+	resp_hdr->hlength = 0;
+
+	hton24(resp_hdr->dlength, login->data_length);
+	memcpy(resp_hdr->isid, &login->isid_lo, 6);
+	resp_hdr->tsih = cpu_to_be16(login->tsih);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->statsn = cpu_to_be32(login->stat_sn);
+	resp_hdr->exp_cmdsn = cpu_to_be32(login->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(login->max_cmd_sn);
+	resp_hdr->status_class = login->status_class;
+	resp_hdr->status_detail = login->status_detail;
+	pld_len = login->data_length;
+	bnx2i_conn->gen_pdu.resp_wr_ptr =
+					bnx2i_conn->gen_pdu.resp_buf + pld_len;
+
+	pad_len = 0;
+	if (pld_len & 0x3)
+		pad_len = 4 - (pld_len % 4);
+
+	if (pad_len) {
+		int i = 0;
+		for (i = 0; i < pad_len; i++) {
+			bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
+			bnx2i_conn->gen_pdu.resp_wr_ptr++;
+		}
+	}
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
+		bnx2i_conn->gen_pdu.resp_buf,
+		bnx2i_conn->gen_pdu.resp_wr_ptr - bnx2i_conn->gen_pdu.resp_buf);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_tmf_resp - this function handles iscsi TMF response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI TMF Response CQE and wake up the driver eh thread.
+ */
+static int bnx2i_process_tmf_resp(struct iscsi_session *session,
+				  struct bnx2i_conn *bnx2i_conn,
+				  struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_tmf_response *tmf_cqe;
+	struct iscsi_tm_rsp *resp_hdr;
+
+	tmf_cqe = (struct bnx2i_tmf_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 tmf_cqe->itt & ISCSI_TMF_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_tm_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = tmf_cqe->op_code;
+	resp_hdr->max_cmdsn = cpu_to_be32(tmf_cqe->max_cmd_sn);
+	resp_hdr->exp_cmdsn = cpu_to_be32(tmf_cqe->exp_cmd_sn);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->response = tmf_cqe->response;
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_logout_resp - this function handles iscsi logout response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI Logout Response CQE & make function call to
+ * notify the user daemon.
+ */
+static int bnx2i_process_logout_resp(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_logout_response *logout;
+	struct iscsi_logout_rsp *resp_hdr;
+
+	logout = (struct bnx2i_logout_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 logout->itt & ISCSI_LOGOUT_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_logout_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = logout->op_code;
+	resp_hdr->flags = logout->response;
+	resp_hdr->hlength = 0;
+
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->statsn = task->hdr->exp_statsn;
+	resp_hdr->exp_cmdsn = cpu_to_be32(logout->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(logout->max_cmd_sn);
+
+	resp_hdr->t2wait = cpu_to_be32(logout->time_to_wait);
+	resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_nopin_local_cmpl - this function handles iscsi nopin CQE
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI NOPIN local completion CQE, frees IIT and command structures
+ */
+static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
+					   struct bnx2i_conn *bnx2i_conn,
+					   struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_nop_in_msg *nop_in;
+	struct iscsi_task *task;
+
+	nop_in = (struct bnx2i_nop_in_msg *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
+	if (task)
+		iscsi_put_task(task);
+	spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_unsol_pdu_adjust_rq - makes adjustments to RQ after unsol pdu is recvd
+ * @conn:	iscsi connection
+ *
+ * Firmware advances RQ producer index for every unsolicited PDU even if
+ *	payload data length is '0'. This function makes corresponding
+ *	adjustments on the driver side to match this f/w behavior
+ */
+static void bnx2i_unsol_pdu_adjust_rq(struct bnx2i_conn *bnx2i_conn)
+{
+	char dummy_rq_data[2];
+	bnx2i_get_rq_buf(bnx2i_conn, dummy_rq_data, 1);
+	bnx2i_put_rq_buf(bnx2i_conn, 1);
+}
+
+
+/**
+ * bnx2i_process_nopin_mesg - this function handles iscsi nopin CQE
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI target's proactive iSCSI NOPIN request
+ */
+static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_nop_in_msg *nop_in;
+	struct iscsi_nopin *hdr;
+	u32 itt;
+	int tgt_async_nop = 0;
+
+	nop_in = (struct bnx2i_nop_in_msg *)cqe;
+	itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
+
+	spin_lock(&session->lock);
+	hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
+	memset(hdr, 0, sizeof(struct iscsi_hdr));
+	hdr->opcode = nop_in->op_code;
+	hdr->max_cmdsn = cpu_to_be32(nop_in->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
+	hdr->ttt = cpu_to_be32(nop_in->ttt);
+
+	if (itt == (u16) RESERVED_ITT) {
+		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+		hdr->itt = RESERVED_ITT;
+		tgt_async_nop = 1;
+		goto done;
+	}
+
+	/* this is a response to one of our nop-outs */
+	task = iscsi_itt_to_task(conn, itt);
+	if (task) {
+		hdr->flags = ISCSI_FLAG_CMD_FINAL;
+		hdr->itt = task->hdr->itt;
+		hdr->ttt = cpu_to_be32(nop_in->ttt);
+		memcpy(hdr->lun, nop_in->lun, 8);
+	}
+done:
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+	spin_unlock(&session->lock);
+
+	return tgt_async_nop;
+}
+
+
+/**
+ * bnx2i_process_async_mesg - this function handles iscsi async message
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI ASYNC Message
+ */
+static void bnx2i_process_async_mesg(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct bnx2i_async_msg *async_cqe;
+	struct iscsi_async *resp_hdr;
+	u8 async_event;
+
+	bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+	async_cqe = (struct bnx2i_async_msg *)cqe;
+	async_event = async_cqe->async_event;
+
+	if (async_event == ISCSI_ASYNC_MSG_SCSI_EVENT) {
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				  "async: scsi events not supported\n");
+		return;
+	}
+
+	spin_lock(&session->lock);
+	resp_hdr = (struct iscsi_async *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = async_cqe->op_code;
+	resp_hdr->flags = 0x80;
+
+	memcpy(resp_hdr->lun, async_cqe->lun, 8);
+	resp_hdr->exp_cmdsn = cpu_to_be32(async_cqe->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(async_cqe->max_cmd_sn);
+
+	resp_hdr->async_event = async_cqe->async_event;
+	resp_hdr->async_vcode = async_cqe->async_vcode;
+
+	resp_hdr->param1 = cpu_to_be16(async_cqe->param1);
+	resp_hdr->param2 = cpu_to_be16(async_cqe->param2);
+	resp_hdr->param3 = cpu_to_be16(async_cqe->param3);
+
+	__iscsi_complete_pdu(bnx2i_conn->cls_conn->dd_data,
+			     (struct iscsi_hdr *)resp_hdr, NULL, 0);
+	spin_unlock(&session->lock);
+}
+
+
+/**
+ * bnx2i_process_reject_mesg - process iscsi reject pdu
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI REJECT message
+ */
+static void bnx2i_process_reject_mesg(struct iscsi_session *session,
+				      struct bnx2i_conn *bnx2i_conn,
+				      struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_reject_msg *reject;
+	struct iscsi_reject *hdr;
+
+	reject = (struct bnx2i_reject_msg *) cqe;
+	if (reject->data_length) {
+		bnx2i_get_rq_buf(bnx2i_conn, conn->data, reject->data_length);
+		bnx2i_put_rq_buf(bnx2i_conn, 1);
+	} else
+		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+	spin_lock(&session->lock);
+	hdr = (struct iscsi_reject *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(hdr, 0, sizeof(struct iscsi_hdr));
+	hdr->opcode = reject->op_code;
+	hdr->reason = reject->reason;
+	hton24(hdr->dlength, reject->data_length);
+	hdr->max_cmdsn = cpu_to_be32(reject->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(reject->exp_cmd_sn);
+	hdr->ffffffff = cpu_to_be32(RESERVED_ITT);
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, conn->data,
+			     reject->data_length);
+	spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_process_cmd_cleanup_resp - process scsi command clean-up completion
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process command cleanup response CQE during conn shutdown or error recovery
+ */
+static void bnx2i_process_cmd_cleanup_resp(struct iscsi_session *session,
+					   struct bnx2i_conn *bnx2i_conn,
+					   struct cqe *cqe)
+{
+	struct bnx2i_cleanup_response *cmd_clean_rsp;
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+
+	cmd_clean_rsp = (struct bnx2i_cleanup_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+			cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+	if (!task)
+		printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
+			cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+	spin_unlock(&session->lock);
+	complete(&bnx2i_conn->cmd_cleanup_cmpl);
+}
+
+
+
+/**
+ * bnx2i_process_new_cqes - process newly DMA'ed CQE's
+ * @bnx2i_conn:		iscsi connection
+ *
+ * this function is called by generic KCQ handler to process all pending CQE's
+ */
+static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_session *session = conn->session;
+	struct qp_info *qp = &bnx2i_conn->ep->qp;
+	struct bnx2i_nop_in_msg *nopin;
+	int tgt_async_msg;
+
+	while (1) {
+		nopin = (struct bnx2i_nop_in_msg *) qp->cq_cons_qe;
+		if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
+			break;
+
+		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+			break;
+
+		tgt_async_msg = 0;
+
+		switch (nopin->op_code) {
+		case ISCSI_OP_SCSI_CMD_RSP:
+		case ISCSI_OP_SCSI_DATA_IN:
+			bnx2i_process_scsi_cmd_resp(session, bnx2i_conn,
+						    qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_LOGIN_RSP:
+			bnx2i_process_login_resp(session, bnx2i_conn,
+						 qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_SCSI_TMFUNC_RSP:
+			bnx2i_process_tmf_resp(session, bnx2i_conn,
+					       qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_LOGOUT_RSP:
+			bnx2i_process_logout_resp(session, bnx2i_conn,
+						  qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_NOOP_IN:
+			if (bnx2i_process_nopin_mesg(session, bnx2i_conn,
+						     qp->cq_cons_qe))
+				tgt_async_msg = 1;
+			break;
+		case ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION:
+			bnx2i_process_nopin_local_cmpl(session, bnx2i_conn,
+						       qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_ASYNC_EVENT:
+			bnx2i_process_async_mesg(session, bnx2i_conn,
+						 qp->cq_cons_qe);
+			tgt_async_msg = 1;
+			break;
+		case ISCSI_OP_REJECT:
+			bnx2i_process_reject_mesg(session, bnx2i_conn,
+						  qp->cq_cons_qe);
+			break;
+		case ISCSI_OPCODE_CLEANUP_RESPONSE:
+			bnx2i_process_cmd_cleanup_resp(session, bnx2i_conn,
+						       qp->cq_cons_qe);
+			break;
+		default:
+			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+					  nopin->op_code);
+		}
+
+		if (!tgt_async_msg)
+			bnx2i_conn->ep->num_active_cmds--;
+
+		/* clear out in production version only, till beta keep opcode
+		 * field intact, will be helpful in debugging (context dump)
+		 * nopin->op_code = 0;
+		 */
+		qp->cqe_exp_seq_sn++;
+		if (qp->cqe_exp_seq_sn == (qp->cqe_size * 2 + 1))
+			qp->cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+
+		if (qp->cq_cons_qe == qp->cq_last_qe) {
+			qp->cq_cons_qe = qp->cq_first_qe;
+			qp->cq_cons_idx = 0;
+		} else {
+			qp->cq_cons_qe++;
+			qp->cq_cons_idx++;
+		}
+	}
+	bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+}
+
+/**
+ * bnx2i_fastpath_notification - process global event queue (KCQ)
+ * @hba:		adapter structure pointer
+ * @new_cqe_kcqe:	pointer to newly DMA'ed KCQE entry
+ *
+ * Fast path event notification handler, KCQ entry carries context id
+ *	of the connection that has 1 or more pending CQ entries
+ */
+static void bnx2i_fastpath_notification(struct bnx2i_hba *hba,
+					struct iscsi_kcqe *new_cqe_kcqe)
+{
+	struct bnx2i_conn *conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = new_cqe_kcqe->iscsi_conn_id;
+	conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!conn) {
+		printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
+		return;
+	}
+	if (!conn->ep) {
+		printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
+		return;
+	}
+
+	bnx2i_process_new_cqes(conn);
+}
+
+
+/**
+ * bnx2i_process_update_conn_cmpl - process iscsi conn update completion KCQE
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * CONN_UPDATE completion handler, this completes iSCSI connection FFP migration
+ */
+static void bnx2i_process_update_conn_cmpl(struct bnx2i_hba *hba,
+					   struct iscsi_kcqe *update_kcqe)
+{
+	struct bnx2i_conn *conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = update_kcqe->iscsi_conn_id;
+	conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!conn) {
+		printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
+		return;
+	}
+	if (!conn->ep) {
+		printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
+		return;
+	}
+
+	if (update_kcqe->completion_status) {
+		printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
+		conn->ep->state = EP_STATE_ULP_UPDATE_FAILED;
+	} else
+		conn->ep->state = EP_STATE_ULP_UPDATE_COMPL;
+
+	wake_up_interruptible(&conn->ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_recovery_que_add_conn - add connection to recovery queue
+ * @hba:		adapter structure pointer
+ * @bnx2i_conn:		iscsi connection
+ *
+ * Add connection to recovery queue and schedule adapter eh worker
+ */
+static void bnx2i_recovery_que_add_conn(struct bnx2i_hba *hba,
+					struct bnx2i_conn *bnx2i_conn)
+{
+	iscsi_conn_failure(bnx2i_conn->cls_conn->dd_data,
+			   ISCSI_ERR_CONN_FAILED);
+}
+
+
+/**
+ * bnx2i_process_tcp_error - process error notification on a given connection
+ *
+ * @hba: 		adapter structure pointer
+ * @tcp_err: 		tcp error kcqe pointer
+ *
+ * handles tcp level error notifications from FW.
+ */
+static void bnx2i_process_tcp_error(struct bnx2i_hba *hba,
+				    struct iscsi_kcqe *tcp_err)
+{
+	struct bnx2i_conn *bnx2i_conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = tcp_err->iscsi_conn_id;
+	bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!bnx2i_conn) {
+		printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+		return;
+	}
+
+	printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
+			  iscsi_cid, tcp_err->completion_status);
+	bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+}
+
+
+/**
+ * bnx2i_process_iscsi_error - process error notification on a given connection
+ * @hba:		adapter structure pointer
+ * @iscsi_err:		iscsi error kcqe pointer
+ *
+ * handles iscsi error notifications from the FW. Firmware based in initial
+ *	handshake classifies iscsi protocol / TCP rfc violation into either
+ *	warning or error indications. If indication is of "Error" type, driver
+ *	will initiate session recovery for that connection/session. For
+ *	"Warning" type indication, driver will put out a system log message
+ *	(there will be only one message for each type for the life of the
+ *	session, this is to avoid un-necessarily overloading the system)
+ */
+static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba,
+				      struct iscsi_kcqe *iscsi_err)
+{
+	struct bnx2i_conn *bnx2i_conn;
+	u32 iscsi_cid;
+	char warn_notice[] = "iscsi_warning";
+	char error_notice[] = "iscsi_error";
+	char additional_notice[64];
+	char *message;
+	int need_recovery;
+	u64 err_mask64;
+
+	iscsi_cid = iscsi_err->iscsi_conn_id;
+	bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+	if (!bnx2i_conn) {
+		printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+		return;
+	}
+
+	err_mask64 = (0x1ULL << iscsi_err->completion_status);
+
+	if (err_mask64 & iscsi_error_mask) {
+		need_recovery = 0;
+		message = warn_notice;
+	} else {
+		need_recovery = 1;
+		message = error_notice;
+	}
+
+	switch (iscsi_err->completion_status) {
+	case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR:
+		strcpy(additional_notice, "hdr digest err");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR:
+		strcpy(additional_notice, "data digest err");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE:
+		strcpy(additional_notice, "wrong opcode rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN:
+		strcpy(additional_notice, "AHS len > 0 rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT:
+		strcpy(additional_notice, "invalid ITT rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN:
+		strcpy(additional_notice, "wrong StatSN rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN:
+		strcpy(additional_notice, "wrong DataSN rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T:
+		strcpy(additional_notice, "pend R2T violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0:
+		strcpy(additional_notice, "ERL0, UO");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1:
+		strcpy(additional_notice, "ERL0, U1");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2:
+		strcpy(additional_notice, "ERL0, U2");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3:
+		strcpy(additional_notice, "ERL0, U3");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4:
+		strcpy(additional_notice, "ERL0, U4");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5:
+		strcpy(additional_notice, "ERL0, U5");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6:
+		strcpy(additional_notice, "ERL0, U6");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN:
+		strcpy(additional_notice, "invalid resi len");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN:
+		strcpy(additional_notice, "MRDSL violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO:
+		strcpy(additional_notice, "F-bit not set");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV:
+		strcpy(additional_notice, "invalid TTT");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN:
+		strcpy(additional_notice, "invalid DataSN");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN:
+		strcpy(additional_notice, "burst len violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF:
+		strcpy(additional_notice, "buf offset violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN:
+		strcpy(additional_notice, "invalid LUN field");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN:
+		strcpy(additional_notice, "invalid R2TSN field");
+		break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0
+	case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0:
+		strcpy(additional_notice, "invalid cmd len1");
+		break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1
+	case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1:
+		strcpy(additional_notice, "invalid cmd len2");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED:
+		strcpy(additional_notice,
+		       "pend r2t exceeds MaxOutstandingR2T value");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV:
+		strcpy(additional_notice, "TTT is rsvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN:
+		strcpy(additional_notice, "MBL violation");
+		break;
+#define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO
+	case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO:
+		strcpy(additional_notice, "data seg len != 0");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN:
+		strcpy(additional_notice, "reject pdu len error");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN:
+		strcpy(additional_notice, "async pdu len error");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN:
+		strcpy(additional_notice, "nopin pdu len error");
+		break;
+#define BNX2_ERR_PEND_R2T_IN_CLEANUP			\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP
+	case BNX2_ERR_PEND_R2T_IN_CLEANUP:
+		strcpy(additional_notice, "pend r2t in cleanup");
+		break;
+
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT:
+		strcpy(additional_notice, "IP fragments rcvd");
+		break;
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS:
+		strcpy(additional_notice, "IP options error");
+		break;
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG:
+		strcpy(additional_notice, "urgent flag error");
+		break;
+	default:
+		printk(KERN_ALERT "iscsi_err - unknown err %x\n",
+				  iscsi_err->completion_status);
+	}
+
+	if (need_recovery) {
+		iscsi_conn_printk(KERN_ALERT,
+				  bnx2i_conn->cls_conn->dd_data,
+				  "bnx2i: %s - %s\n",
+				  message, additional_notice);
+
+		iscsi_conn_printk(KERN_ALERT,
+				  bnx2i_conn->cls_conn->dd_data,
+				  "conn_err - hostno %d conn %p, "
+				  "iscsi_cid %x cid %x\n",
+				  bnx2i_conn->hba->shost->host_no,
+				  bnx2i_conn, bnx2i_conn->ep->ep_iscsi_cid,
+				  bnx2i_conn->ep->ep_cid);
+		bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+	} else
+		if (!test_and_set_bit(iscsi_err->completion_status,
+				      (void *) &bnx2i_conn->violation_notified))
+			iscsi_conn_printk(KERN_ALERT,
+					  bnx2i_conn->cls_conn->dd_data,
+					  "bnx2i: %s - %s\n",
+					  message, additional_notice);
+}
+
+
+/**
+ * bnx2i_process_conn_destroy_cmpl - process iscsi conn destroy completion
+ * @hba:		adapter structure pointer
+ * @conn_destroy:	conn destroy kcqe pointer
+ *
+ * handles connection destroy completion request.
+ */
+static void bnx2i_process_conn_destroy_cmpl(struct bnx2i_hba *hba,
+					    struct iscsi_kcqe *conn_destroy)
+{
+	struct bnx2i_endpoint *ep;
+
+	ep = bnx2i_find_ep_in_destroy_list(hba, conn_destroy->iscsi_conn_id);
+	if (!ep) {
+		printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
+				  "offload request, unexpected complection\n");
+		return;
+	}
+
+	if (hba != ep->hba) {
+		printk(KERN_ALERT "conn destroy- error hba mis-match\n");
+		return;
+	}
+
+	if (conn_destroy->completion_status) {
+		printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
+		ep->state = EP_STATE_CLEANUP_FAILED;
+	} else
+		ep->state = EP_STATE_CLEANUP_CMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_process_ofld_cmpl - process initial iscsi conn offload completion
+ * @hba:		adapter structure pointer
+ * @ofld_kcqe:		conn offload kcqe pointer
+ *
+ * handles initial connection offload completion, ep_connect() thread is
+ *	woken-up to continue with LLP connect process
+ */
+static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
+				    struct iscsi_kcqe *ofld_kcqe)
+{
+	u32 cid_addr;
+	struct bnx2i_endpoint *ep;
+	u32 cid_num;
+
+	ep = bnx2i_find_ep_in_ofld_list(hba, ofld_kcqe->iscsi_conn_id);
+	if (!ep) {
+		printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
+		return;
+	}
+
+	if (hba != ep->hba) {
+		printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n");
+		return;
+	}
+
+	if (ofld_kcqe->completion_status) {
+		if (ofld_kcqe->completion_status ==
+		    ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
+			printk(KERN_ALERT "bnx2i: unable to allocate"
+					  " iSCSI context resources\n");
+		ep->state = EP_STATE_OFLD_FAILED;
+	} else {
+		ep->state = EP_STATE_OFLD_COMPL;
+		cid_addr = ofld_kcqe->iscsi_conn_context_id;
+		cid_num = bnx2i_get_cid_num(ep);
+		ep->ep_cid = cid_addr;
+		ep->qp.ctx_base = NULL;
+	}
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+/**
+ * bnx2i_indicate_kcqe - process iscsi conn update completion KCQE
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * Generic KCQ event handler/dispatcher
+ */
+static void bnx2i_indicate_kcqe(void *context, struct kcqe *kcqe[],
+				u32 num_cqe)
+{
+	struct bnx2i_hba *hba = context;
+	int i = 0;
+	struct iscsi_kcqe *ikcqe = NULL;
+
+	while (i < num_cqe) {
+		ikcqe = (struct iscsi_kcqe *) kcqe[i++];
+
+		if (ikcqe->op_code ==
+		    ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION)
+			bnx2i_fastpath_notification(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_OFFLOAD_CONN)
+			bnx2i_process_ofld_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_UPDATE_CONN)
+			bnx2i_process_update_conn_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_INIT) {
+			if (ikcqe->completion_status !=
+			    ISCSI_KCQE_COMPLETION_STATUS_SUCCESS)
+				bnx2i_iscsi_license_error(hba, ikcqe->\
+							  completion_status);
+			else {
+				set_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+				bnx2i_get_link_state(hba);
+				printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
+						 "ISCSI_INIT passed\n",
+						 (u8)hba->pcidev->bus->number,
+						 hba->pci_devno,
+						 (u8)hba->pci_func);
+
+
+			}
+		} else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_DESTROY_CONN)
+			bnx2i_process_conn_destroy_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_ISCSI_ERROR)
+			bnx2i_process_iscsi_error(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_TCP_ERROR)
+			bnx2i_process_tcp_error(hba, ikcqe);
+		else
+			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+					  ikcqe->op_code);
+	}
+}
+
+
+/**
+ * bnx2i_indicate_netevent - Generic netdev event handler
+ * @context:	adapter structure pointer
+ * @event:	event type
+ *
+ * Handles four netdev events, NETDEV_UP, NETDEV_DOWN,
+ *	NETDEV_GOING_DOWN and NETDEV_CHANGE
+ */
+static void bnx2i_indicate_netevent(void *context, unsigned long event)
+{
+	struct bnx2i_hba *hba = context;
+
+	switch (event) {
+	case NETDEV_UP:
+		if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+			bnx2i_send_fw_iscsi_init_msg(hba);
+		break;
+	case NETDEV_DOWN:
+		clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+		clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+		break;
+	case NETDEV_GOING_DOWN:
+		set_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+		break;
+	case NETDEV_CHANGE:
+		bnx2i_get_link_state(hba);
+		break;
+	default:
+		;
+	}
+}
+
+
+/**
+ * bnx2i_cm_connect_cmpl - process iscsi conn establishment completion
+ * @cm_sk: 		cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 TCP connect request.
+ */
+static void bnx2i_cm_connect_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+		ep->state = EP_STATE_CONNECT_FAILED;
+	else if (test_bit(SK_F_OFFLD_COMPLETE, &cm_sk->flags))
+		ep->state = EP_STATE_CONNECT_COMPL;
+	else
+		ep->state = EP_STATE_CONNECT_FAILED;
+
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_close_cmpl - process tcp conn close completion
+ * @cm_sk:	cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 graceful TCP connect shutdown
+ */
+static void bnx2i_cm_close_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_DISCONN_COMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_abort_cmpl - process abortive tcp conn teardown completion
+ * @cm_sk:	cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 abortive TCP connect termination
+ */
+static void bnx2i_cm_abort_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_DISCONN_COMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_remote_close - process received TCP FIN
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to indicate
+ *	async TCP events such as FIN
+ */
+static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_TCP_FIN_RCVD;
+	if (ep->conn)
+		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+/**
+ * bnx2i_cm_remote_abort - process TCP RST and start conn cleanup
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate async TCP events (RST) sent by the peer.
+ */
+static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_TCP_RST_RCVD;
+	if (ep->conn)
+		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+
+static void bnx2i_send_nl_mesg(struct cnic_dev *dev, u32 msg_type,
+			       char *buf, u16 buflen)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba)
+		return;
+
+	if (iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
+				   msg_type, buf, buflen))
+		printk(KERN_ALERT "bnx2i: private nl message send error\n");
+
+}
+
+
+/**
+ * bnx2i_cnic_cb - global template of bnx2i - cnic driver interface structure
+ *			carrying callback function pointers
+ *
+ */
+struct cnic_ulp_ops bnx2i_cnic_cb = {
+	.cnic_init = bnx2i_ulp_init,
+	.cnic_exit = bnx2i_ulp_exit,
+	.cnic_start = bnx2i_start,
+	.cnic_stop = bnx2i_stop,
+	.indicate_kcqes = bnx2i_indicate_kcqe,
+	.indicate_netevent = bnx2i_indicate_netevent,
+	.cm_connect_complete = bnx2i_cm_connect_cmpl,
+	.cm_close_complete = bnx2i_cm_close_cmpl,
+	.cm_abort_complete = bnx2i_cm_abort_cmpl,
+	.cm_remote_close = bnx2i_cm_remote_close,
+	.cm_remote_abort = bnx2i_cm_remote_abort,
+	.iscsi_nl_send_msg = bnx2i_send_nl_mesg,
+	.owner = THIS_MODULE
+};
+
+
+/**
+ * bnx2i_map_ep_dbell_regs - map connection doorbell registers
+ * @ep: bnx2i endpoint
+ *
+ * maps connection's SQ and RQ doorbell registers, 5706/5708/5709 hosts these
+ *	register in BAR #0. Whereas in 57710 these register are accessed by
+ *	mapping BAR #1
+ */
+int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
+{
+	u32 cid_num;
+	u32 reg_off;
+	u32 first_l4l5;
+	u32 ctx_sz;
+	u32 config2;
+	resource_size_t reg_base;
+
+	cid_num = bnx2i_get_cid_num(ep);
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		reg_base = pci_resource_start(ep->hba->pcidev,
+					      BNX2X_DOORBELL_PCI_BAR);
+		reg_off = PAGE_SIZE * (cid_num & 0x1FFFF) + DPM_TRIGER_TYPE;
+		ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
+		goto arm_cq;
+	}
+
+	reg_base = ep->hba->netdev->base_addr;
+	if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
+	    (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
+		config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
+		first_l4l5 = config2 & BNX2_MQ_CONFIG2_FIRST_L4L5;
+		ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
+		if (ctx_sz)
+			reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
+				  + PAGE_SIZE *
+				  (((cid_num - first_l4l5) / ctx_sz) + 256);
+		else
+			reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+	} else
+		/* 5709 device in normal node and 5706/5708 devices */
+		reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+
+	ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+					  MB_KERNEL_CTX_SIZE);
+	if (!ep->qp.ctx_base)
+		return -ENOMEM;
+
+arm_cq:
+	bnx2i_arm_cq_event_coalescing(ep, CNIC_ARM_CQE);
+	return 0;
+}
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 00000000000..ae4b2d588fd
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,438 @@
+/* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+static int bnx2i_reg_device;
+
+#define DRV_MODULE_NAME		"bnx2i"
+#define DRV_MODULE_VERSION	"2.0.1d"
+#define DRV_MODULE_RELDATE	"Mar 25, 2009"
+
+static char version[] __devinitdata =
+		"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+		" v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_RWLOCK(bnx2i_dev_lock);
+
+unsigned int event_coal_div = 1;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, int, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, int, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: 		Adapter structure pointer
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ *	queue mailbox register access method, 5709 requires driver to
+ *	access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba)
+{
+	hba->cnic_dev_type = 0;
+	if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
+		set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
+		set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
+		set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+		hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+	} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+		set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+	struct bnx2i_hba *hba = NULL;
+	struct bnx2i_hba *tmp_hba;
+
+	if (!adapter_count)
+		goto hba_not_found;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry(tmp_hba, &adapter_list, link) {
+		if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+			hba = tmp_hba;
+			break;
+		}
+	}
+	read_unlock(&bnx2i_dev_lock);
+hba_not_found:
+	return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic:	pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+		if (hba->cnic == cnic) {
+			read_unlock(&bnx2i_dev_lock);
+			return hba;
+		}
+	}
+	read_unlock(&bnx2i_dev_lock);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ *	firmware handshake to enable/initialize on chip iscsi components
+ * 	This bnx2i - cnic interface api callback is issued after following
+ *	2 conditions are met -
+ *	  a) underlying network interface is up (marked by event 'NETDEV_UP'
+ *		from netdev
+ *	  b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME	(1000 / HZ)
+	struct bnx2i_hba *hba = handle;
+	int i = HZ;
+
+	bnx2i_send_fw_iscsi_init_msg(hba);
+	while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+		msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ *	the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+	struct bnx2i_hba *hba = handle;
+
+	/* check if cleanup happened in GOING_DOWN context */
+	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
+				&hba->adapter_state))
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+}
+
+/**
+ * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
+ * @hba:	Adapter instance to register
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding the
+ *	adapter structure lock
+ */
+void bnx2i_register_device(struct bnx2i_hba *hba)
+{
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+	    test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		return;
+	}
+
+	hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
+
+	spin_lock(&hba->lock);
+	bnx2i_reg_device++;
+	spin_unlock(&hba->lock);
+
+	set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+
+/**
+ * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
+ *
+ * registers all bnx2i adapter instances with the cnic driver while holding
+ *	the global resource lock
+ */
+void bnx2i_reg_dev_all(void)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link)
+		bnx2i_register_device(hba);
+	read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
+ * @hba:	Adapter instance to unregister
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding
+ *	the adapter structure lock
+ */
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
+{
+	if (hba->ofld_conns_active ||
+	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
+	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
+		return;
+
+	hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+
+	spin_lock(&hba->lock);
+	bnx2i_reg_device--;
+	spin_unlock(&hba->lock);
+
+	/* ep_disconnect could come before NETDEV_DOWN, driver won't
+	 * see NETDEV_DOWN as it already unregistered itself.
+	 */
+	hba->adapter_state = 0;
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+/**
+ * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
+ *
+ * unregisters all bnx2i adapter instances with the cnic driver while holding
+ *	the global resource lock
+ */
+void bnx2i_unreg_dev_all(void)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link)
+		bnx2i_unreg_one_device(hba);
+	read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba:	bnx2i adapter instance
+ * @cnic:	cnic device handle
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	below. This routine is called from cnic_register_driver() context and
+ *	work horse thread which does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+	int rc;
+
+	read_lock(&bnx2i_dev_lock);
+	if (bnx2i_reg_device &&
+	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+		if (rc)		/* duplicate registration */
+			printk(KERN_ERR "bnx2i- dev reg failed\n");
+
+		spin_lock(&hba->lock);
+		bnx2i_reg_device++;
+		hba->age++;
+		spin_unlock(&hba->lock);
+
+		set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	}
+	read_unlock(&bnx2i_dev_lock);
+
+	write_lock(&bnx2i_dev_lock);
+	list_add_tail(&hba->link, &adapter_list);
+	adapter_count++;
+	write_unlock(&bnx2i_dev_lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev:	cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ *	cnic devices. This routine allocate adapter structure and other
+ *	device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	/* Allocate a HBA structure for this device */
+	hba = bnx2i_alloc_hba(dev);
+	if (!hba) {
+		printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+		return;
+	}
+
+	/* Get PCI related information and update hba struct members */
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	if (bnx2i_init_one(hba, dev)) {
+		printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+		bnx2i_free_hba(hba);
+	} else
+		hba->cnic = dev;
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev:	cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba) {
+		printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+				 "found, dev 0x%p\n", dev);
+		return;
+	}
+	write_lock(&bnx2i_dev_lock);
+	list_del_init(&hba->link);
+	adapter_count--;
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+		clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+
+		spin_lock(&hba->lock);
+		bnx2i_reg_device--;
+		spin_unlock(&hba->lock);
+	}
+	write_unlock(&bnx2i_dev_lock);
+
+	bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ *	tcp port manager/queue, sysfs. finally driver will register itself
+ *	with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+	int err;
+
+	printk(KERN_INFO "%s", version);
+
+	if (!is_power_of_2(sq_size))
+		sq_size = roundup_pow_of_two(sq_size);
+
+	bnx2i_scsi_xport_template =
+			iscsi_register_transport(&bnx2i_iscsi_transport);
+	if (!bnx2i_scsi_xport_template) {
+		printk(KERN_ERR "Could not register bnx2i transport.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+	if (err) {
+		printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+		goto unreg_xport;
+	}
+
+	return 0;
+
+unreg_xport:
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+	return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	in this function. Driver will browse through the adapter list, cleans-up
+ *	each instance, unregisters iscsi transport name and finally driver will
+ *	unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+	struct bnx2i_hba *hba;
+
+	write_lock(&bnx2i_dev_lock);
+	while (!list_empty(&adapter_list)) {
+		hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+		list_del(&hba->link);
+		adapter_count--;
+
+		if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+			hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+			clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+			bnx2i_reg_device--;
+		}
+
+		write_unlock(&bnx2i_dev_lock);
+		bnx2i_free_hba(hba);
+		write_lock(&bnx2i_dev_lock);
+	}
+	write_unlock(&bnx2i_dev_lock);
+
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+	cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
new file mode 100644
index 00000000000..f7412196f2f
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -0,0 +1,2064 @@
+/*
+ * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+struct scsi_transport_template *bnx2i_scsi_xport_template;
+struct iscsi_transport bnx2i_iscsi_transport;
+static struct scsi_host_template bnx2i_host_template;
+
+/*
+ * Global endpoint resource info
+ */
+static DEFINE_SPINLOCK(bnx2i_resc_lock); /* protects global resources */
+
+
+static int bnx2i_adapter_ready(struct bnx2i_hba *hba)
+{
+	int retval = 0;
+
+	if (!hba || !test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+	    test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+		retval = -EPERM;
+	return retval;
+}
+
+/**
+ * bnx2i_get_write_cmd_bd_idx - identifies various BD bookmarks
+ * @cmd:		iscsi cmd struct pointer
+ * @buf_off:		absolute buffer offset
+ * @start_bd_off:	u32 pointer to return the offset within the BD
+ *			indicated by 'start_bd_idx' on which 'buf_off' falls
+ * @start_bd_idx:	index of the BD on which 'buf_off' falls
+ *
+ * identifies & marks various bd info for scsi command's imm data,
+ * unsolicited data and the first solicited data seq.
+ */
+static void bnx2i_get_write_cmd_bd_idx(struct bnx2i_cmd *cmd, u32 buf_off,
+				       u32 *start_bd_off, u32 *start_bd_idx)
+{
+	struct iscsi_bd *bd_tbl = cmd->io_tbl.bd_tbl;
+	u32 cur_offset = 0;
+	u32 cur_bd_idx = 0;
+
+	if (buf_off) {
+		while (buf_off >= (cur_offset + bd_tbl->buffer_length)) {
+			cur_offset += bd_tbl->buffer_length;
+			cur_bd_idx++;
+			bd_tbl++;
+		}
+	}
+
+	*start_bd_off = buf_off - cur_offset;
+	*start_bd_idx = cur_bd_idx;
+}
+
+/**
+ * bnx2i_setup_write_cmd_bd_info - sets up BD various information
+ * @task:	transport layer's cmd struct pointer
+ *
+ * identifies & marks various bd info for scsi command's immediate data,
+ * unsolicited data and first solicited data seq which includes BD start
+ * index & BD buf off. his function takes into account iscsi parameter such
+ * as immediate data and unsolicited data is support on this connection.
+ */
+static void bnx2i_setup_write_cmd_bd_info(struct iscsi_task *task)
+{
+	struct bnx2i_cmd *cmd = task->dd_data;
+	u32 start_bd_offset;
+	u32 start_bd_idx;
+	u32 buffer_offset = 0;
+	u32 cmd_len = cmd->req.total_data_transfer_length;
+
+	/* if ImmediateData is turned off & IntialR2T is turned on,
+	 * there will be no immediate or unsolicited data, just return.
+	 */
+	if (!iscsi_task_has_unsol_data(task) && !task->imm_count)
+		return;
+
+	/* Immediate data */
+	buffer_offset += task->imm_count;
+	if (task->imm_count == cmd_len)
+		return;
+
+	if (iscsi_task_has_unsol_data(task)) {
+		bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+					   &start_bd_offset, &start_bd_idx);
+		cmd->req.ud_buffer_offset = start_bd_offset;
+		cmd->req.ud_start_bd_index = start_bd_idx;
+		buffer_offset += task->unsol_r2t.data_length;
+	}
+
+	if (buffer_offset != cmd_len) {
+		bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+					   &start_bd_offset, &start_bd_idx);
+		if ((start_bd_offset > task->conn->session->first_burst) ||
+		    (start_bd_idx > scsi_sg_count(cmd->scsi_cmd))) {
+			int i = 0;
+
+			iscsi_conn_printk(KERN_ALERT, task->conn,
+					  "bnx2i- error, buf offset 0x%x "
+					  "bd_valid %d use_sg %d\n",
+					  buffer_offset, cmd->io_tbl.bd_valid,
+					  scsi_sg_count(cmd->scsi_cmd));
+			for (i = 0; i < cmd->io_tbl.bd_valid; i++)
+				iscsi_conn_printk(KERN_ALERT, task->conn,
+						  "bnx2i err, bd[%d]: len %x\n",
+						  i, cmd->io_tbl.bd_tbl[i].\
+						  buffer_length);
+		}
+		cmd->req.sd_buffer_offset = start_bd_offset;
+		cmd->req.sd_start_bd_index = start_bd_idx;
+	}
+}
+
+
+
+/**
+ * bnx2i_map_scsi_sg - maps IO buffer and prepares the BD table
+ * @hba:	adapter instance
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * map SG list
+ */
+static int bnx2i_map_scsi_sg(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+	struct scsi_cmnd *sc = cmd->scsi_cmd;
+	struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+	struct scatterlist *sg;
+	int byte_count = 0;
+	int bd_count = 0;
+	int sg_count;
+	int sg_len;
+	u64 addr;
+	int i;
+
+	BUG_ON(scsi_sg_count(sc) > ISCSI_MAX_BDS_PER_CMD);
+
+	sg_count = scsi_dma_map(sc);
+
+	scsi_for_each_sg(sc, sg, sg_count, i) {
+		sg_len = sg_dma_len(sg);
+		addr = (u64) sg_dma_address(sg);
+		bd[bd_count].buffer_addr_lo = addr & 0xffffffff;
+		bd[bd_count].buffer_addr_hi = addr >> 32;
+		bd[bd_count].buffer_length = sg_len;
+		bd[bd_count].flags = 0;
+		if (bd_count == 0)
+			bd[bd_count].flags = ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+		byte_count += sg_len;
+		bd_count++;
+	}
+
+	if (bd_count)
+		bd[bd_count - 1].flags |= ISCSI_BD_LAST_IN_BD_CHAIN;
+
+	BUG_ON(byte_count != scsi_bufflen(sc));
+	return bd_count;
+}
+
+/**
+ * bnx2i_iscsi_map_sg_list - maps SG list
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * creates BD list table for the command
+ */
+static void bnx2i_iscsi_map_sg_list(struct bnx2i_cmd *cmd)
+{
+	int bd_count;
+
+	bd_count  = bnx2i_map_scsi_sg(cmd->conn->hba, cmd);
+	if (!bd_count) {
+		struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+
+		bd[0].buffer_addr_lo = bd[0].buffer_addr_hi = 0;
+		bd[0].buffer_length = bd[0].flags = 0;
+	}
+	cmd->io_tbl.bd_valid = bd_count;
+}
+
+
+/**
+ * bnx2i_iscsi_unmap_sg_list - unmaps SG list
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * unmap IO buffers and invalidate the BD table
+ */
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd)
+{
+	struct scsi_cmnd *sc = cmd->scsi_cmd;
+
+	if (cmd->io_tbl.bd_valid && sc) {
+		scsi_dma_unmap(sc);
+		cmd->io_tbl.bd_valid = 0;
+	}
+}
+
+static void bnx2i_setup_cmd_wqe_template(struct bnx2i_cmd *cmd)
+{
+	memset(&cmd->req, 0x00, sizeof(cmd->req));
+	cmd->req.op_code = 0xFF;
+	cmd->req.bd_list_addr_lo = (u32) cmd->io_tbl.bd_tbl_dma;
+	cmd->req.bd_list_addr_hi =
+		(u32) ((u64) cmd->io_tbl.bd_tbl_dma >> 32);
+
+}
+
+
+/**
+ * bnx2i_bind_conn_to_iscsi_cid - bind conn structure to 'iscsi_cid'
+ * @hba:	pointer to adapter instance
+ * @conn:	pointer to iscsi connection
+ * @iscsi_cid:	iscsi context ID, range 0 - (MAX_CONN - 1)
+ *
+ * update iscsi cid table entry with connection pointer. This enables
+ *	driver to quickly get hold of connection structure pointer in
+ *	completion/interrupt thread using iscsi context ID
+ */
+static int bnx2i_bind_conn_to_iscsi_cid(struct bnx2i_hba *hba,
+					struct bnx2i_conn *bnx2i_conn,
+					u32 iscsi_cid)
+{
+	if (hba && hba->cid_que.conn_cid_tbl[iscsi_cid]) {
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				 "conn bind - entry #%d not free\n", iscsi_cid);
+		return -EBUSY;
+	}
+
+	hba->cid_que.conn_cid_tbl[iscsi_cid] = bnx2i_conn;
+	return 0;
+}
+
+
+/**
+ * bnx2i_get_conn_from_id - maps an iscsi cid to corresponding conn ptr
+ * @hba:	pointer to adapter instance
+ * @iscsi_cid:	iscsi context ID, range 0 - (MAX_CONN - 1)
+ */
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+					  u16 iscsi_cid)
+{
+	if (!hba->cid_que.conn_cid_tbl) {
+		printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n");
+		return NULL;
+
+	} else if (iscsi_cid >= hba->max_active_conns) {
+		printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid);
+		return NULL;
+	}
+	return hba->cid_que.conn_cid_tbl[iscsi_cid];
+}
+
+
+/**
+ * bnx2i_alloc_iscsi_cid - allocates a iscsi_cid from free pool
+ * @hba:	pointer to adapter instance
+ */
+static u32 bnx2i_alloc_iscsi_cid(struct bnx2i_hba *hba)
+{
+	int idx;
+
+	if (!hba->cid_que.cid_free_cnt)
+		return -1;
+
+	idx = hba->cid_que.cid_q_cons_idx;
+	hba->cid_que.cid_q_cons_idx++;
+	if (hba->cid_que.cid_q_cons_idx == hba->cid_que.cid_q_max_idx)
+		hba->cid_que.cid_q_cons_idx = 0;
+
+	hba->cid_que.cid_free_cnt--;
+	return hba->cid_que.cid_que[idx];
+}
+
+
+/**
+ * bnx2i_free_iscsi_cid - returns tcp port to free list
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to free
+ */
+static void bnx2i_free_iscsi_cid(struct bnx2i_hba *hba, u16 iscsi_cid)
+{
+	int idx;
+
+	if (iscsi_cid == (u16) -1)
+		return;
+
+	hba->cid_que.cid_free_cnt++;
+
+	idx = hba->cid_que.cid_q_prod_idx;
+	hba->cid_que.cid_que[idx] = iscsi_cid;
+	hba->cid_que.conn_cid_tbl[iscsi_cid] = NULL;
+	hba->cid_que.cid_q_prod_idx++;
+	if (hba->cid_que.cid_q_prod_idx == hba->cid_que.cid_q_max_idx)
+		hba->cid_que.cid_q_prod_idx = 0;
+}
+
+
+/**
+ * bnx2i_setup_free_cid_que - sets up free iscsi cid queue
+ * @hba:	pointer to adapter instance
+ *
+ * allocates memory for iscsi cid queue & 'cid - conn ptr' mapping table,
+ * 	and initialize table attributes
+ */
+static int bnx2i_setup_free_cid_que(struct bnx2i_hba *hba)
+{
+	int mem_size;
+	int i;
+
+	mem_size = hba->max_active_conns * sizeof(u32);
+	mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	hba->cid_que.cid_que_base = kmalloc(mem_size, GFP_KERNEL);
+	if (!hba->cid_que.cid_que_base)
+		return -ENOMEM;
+
+	mem_size = hba->max_active_conns * sizeof(struct bnx2i_conn *);
+	mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	hba->cid_que.conn_cid_tbl = kmalloc(mem_size, GFP_KERNEL);
+	if (!hba->cid_que.conn_cid_tbl) {
+		kfree(hba->cid_que.cid_que_base);
+		hba->cid_que.cid_que_base = NULL;
+		return -ENOMEM;
+	}
+
+	hba->cid_que.cid_que = (u32 *)hba->cid_que.cid_que_base;
+	hba->cid_que.cid_q_prod_idx = 0;
+	hba->cid_que.cid_q_cons_idx = 0;
+	hba->cid_que.cid_q_max_idx = hba->max_active_conns;
+	hba->cid_que.cid_free_cnt = hba->max_active_conns;
+
+	for (i = 0; i < hba->max_active_conns; i++) {
+		hba->cid_que.cid_que[i] = i;
+		hba->cid_que.conn_cid_tbl[i] = NULL;
+	}
+	return 0;
+}
+
+
+/**
+ * bnx2i_release_free_cid_que - releases 'iscsi_cid' queue resources
+ * @hba:	pointer to adapter instance
+ */
+static void bnx2i_release_free_cid_que(struct bnx2i_hba *hba)
+{
+	kfree(hba->cid_que.cid_que_base);
+	hba->cid_que.cid_que_base = NULL;
+
+	kfree(hba->cid_que.conn_cid_tbl);
+	hba->cid_que.conn_cid_tbl = NULL;
+}
+
+
+/**
+ * bnx2i_alloc_ep - allocates ep structure from global pool
+ * @hba:	pointer to adapter instance
+ *
+ * routine allocates a free endpoint structure from global pool and
+ *	a tcp port to be used for this connection.  Global resource lock,
+ *	'bnx2i_resc_lock' is held while accessing shared global data structures
+ */
+static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba)
+{
+	struct iscsi_endpoint *ep;
+	struct bnx2i_endpoint *bnx2i_ep;
+
+	ep = iscsi_create_endpoint(sizeof(*bnx2i_ep));
+	if (!ep) {
+		printk(KERN_ERR "bnx2i: Could not allocate ep\n");
+		return NULL;
+	}
+
+	bnx2i_ep = ep->dd_data;
+	INIT_LIST_HEAD(&bnx2i_ep->link);
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->hba = hba;
+	bnx2i_ep->hba_age = hba->age;
+	hba->ofld_conns_active++;
+	init_waitqueue_head(&bnx2i_ep->ofld_wait);
+	return ep;
+}
+
+
+/**
+ * bnx2i_free_ep - free endpoint
+ * @ep:		pointer to iscsi endpoint structure
+ */
+static void bnx2i_free_ep(struct iscsi_endpoint *ep)
+{
+	struct bnx2i_endpoint *bnx2i_ep = ep->dd_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bnx2i_resc_lock, flags);
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->hba->ofld_conns_active--;
+
+	bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+	if (bnx2i_ep->conn) {
+		bnx2i_ep->conn->ep = NULL;
+		bnx2i_ep->conn = NULL;
+	}
+
+	bnx2i_ep->hba = NULL;
+	spin_unlock_irqrestore(&bnx2i_resc_lock, flags);
+	iscsi_destroy_endpoint(ep);
+}
+
+
+/**
+ * bnx2i_alloc_bdt - allocates buffer descriptor (BD) table for the command
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ * @cmd:	iscsi command structure
+ */
+static int bnx2i_alloc_bdt(struct bnx2i_hba *hba, struct iscsi_session *session,
+			   struct bnx2i_cmd *cmd)
+{
+	struct io_bdt *io = &cmd->io_tbl;
+	struct iscsi_bd *bd;
+
+	io->bd_tbl = dma_alloc_coherent(&hba->pcidev->dev,
+					ISCSI_MAX_BDS_PER_CMD * sizeof(*bd),
+					&io->bd_tbl_dma, GFP_KERNEL);
+	if (!io->bd_tbl) {
+		iscsi_session_printk(KERN_ERR, session, "Could not "
+				     "allocate bdt.\n");
+		return -ENOMEM;
+	}
+	io->bd_valid = 0;
+	return 0;
+}
+
+/**
+ * bnx2i_destroy_cmd_pool - destroys iscsi command pool and release BD table
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ * @cmd:	iscsi command structure
+ */
+static void bnx2i_destroy_cmd_pool(struct bnx2i_hba *hba,
+				   struct iscsi_session *session)
+{
+	int i;
+
+	for (i = 0; i < session->cmds_max; i++) {
+		struct iscsi_task *task = session->cmds[i];
+		struct bnx2i_cmd *cmd = task->dd_data;
+
+		if (cmd->io_tbl.bd_tbl)
+			dma_free_coherent(&hba->pcidev->dev,
+					  ISCSI_MAX_BDS_PER_CMD *
+					  sizeof(struct iscsi_bd),
+					  cmd->io_tbl.bd_tbl,
+					  cmd->io_tbl.bd_tbl_dma);
+	}
+
+}
+
+
+/**
+ * bnx2i_setup_cmd_pool - sets up iscsi command pool for the session
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ */
+static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba,
+				struct iscsi_session *session)
+{
+	int i;
+
+	for (i = 0; i < session->cmds_max; i++) {
+		struct iscsi_task *task = session->cmds[i];
+		struct bnx2i_cmd *cmd = task->dd_data;
+
+		/* Anil */
+		task->hdr = &cmd->hdr;
+		task->hdr_max = sizeof(struct iscsi_hdr);
+
+		if (bnx2i_alloc_bdt(hba, session, cmd))
+			goto free_bdts;
+	}
+
+	return 0;
+
+free_bdts:
+	bnx2i_destroy_cmd_pool(hba, session);
+	return -ENOMEM;
+}
+
+
+/**
+ * bnx2i_setup_mp_bdt - allocate BD table resources
+ * @hba:	pointer to adapter structure
+ *
+ * Allocate memory for dummy buffer and associated BD
+ * table to be used by middle path (MP) requests
+ */
+static int bnx2i_setup_mp_bdt(struct bnx2i_hba *hba)
+{
+	int rc = 0;
+	struct iscsi_bd *mp_bdt;
+	u64 addr;
+
+	hba->mp_bd_tbl = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+					    &hba->mp_bd_dma, GFP_KERNEL);
+	if (!hba->mp_bd_tbl) {
+		printk(KERN_ERR "unable to allocate Middle Path BDT\n");
+		rc = -1;
+		goto out;
+	}
+
+	hba->dummy_buffer = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+					       &hba->dummy_buf_dma, GFP_KERNEL);
+	if (!hba->dummy_buffer) {
+		printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n");
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->mp_bd_tbl, hba->mp_bd_dma);
+		hba->mp_bd_tbl = NULL;
+		rc = -1;
+		goto out;
+	}
+
+	mp_bdt = (struct iscsi_bd *) hba->mp_bd_tbl;
+	addr = (unsigned long) hba->dummy_buf_dma;
+	mp_bdt->buffer_addr_lo = addr & 0xffffffff;
+	mp_bdt->buffer_addr_hi = addr >> 32;
+	mp_bdt->buffer_length = PAGE_SIZE;
+	mp_bdt->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+out:
+	return rc;
+}
+
+
+/**
+ * bnx2i_free_mp_bdt - releases ITT back to free pool
+ * @hba:	pointer to adapter instance
+ *
+ * free MP dummy buffer and associated BD table
+ */
+static void bnx2i_free_mp_bdt(struct bnx2i_hba *hba)
+{
+	if (hba->mp_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->mp_bd_tbl, hba->mp_bd_dma);
+		hba->mp_bd_tbl = NULL;
+	}
+	if (hba->dummy_buffer) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->dummy_buffer, hba->dummy_buf_dma);
+		hba->dummy_buffer = NULL;
+	}
+		return;
+}
+
+/**
+ * bnx2i_drop_session - notifies iscsid of connection error.
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ *
+ * This notifies iscsid that there is a error, so it can initiate
+ * recovery.
+ *
+ * This relies on caller using the iscsi class iterator so the object
+ * is refcounted and does not disapper from under us.
+ */
+void bnx2i_drop_session(struct iscsi_cls_session *cls_session)
+{
+	iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+/**
+ * bnx2i_ep_destroy_list_add - add an entry to EP destroy list
+ * @hba:	pointer to adapter instance
+ * @ep:		pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_add(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_add_tail(&ep->link, &hba->ep_destroy_list);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+/**
+ * bnx2i_ep_destroy_list_del - add an entry to EP destroy list
+ *
+ * @hba: 		pointer to adapter instance
+ * @ep: 		pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_del(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_del_init(&ep->link);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+
+	return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_add - add an entry to ep offload pending list
+ * @hba:	pointer to adapter instance
+ * @ep:		pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_add(struct bnx2i_hba *hba,
+				  struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_add_tail(&ep->link, &hba->ep_ofld_list);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_del - add an entry to ep offload pending list
+ * @hba: 		pointer to adapter instance
+ * @ep: 		pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_del(struct bnx2i_hba *hba,
+				  struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_del_init(&ep->link);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_find_ep_in_ofld_list - find iscsi_cid in pending list of endpoints
+ *
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+	struct list_head *list;
+	struct list_head *tmp;
+	struct bnx2i_endpoint *ep;
+
+	read_lock_bh(&hba->ep_rdwr_lock);
+	list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
+		ep = (struct bnx2i_endpoint *)list;
+
+		if (ep->ep_iscsi_cid == iscsi_cid)
+			break;
+		ep = NULL;
+	}
+	read_unlock_bh(&hba->ep_rdwr_lock);
+
+	if (!ep)
+		printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+	return ep;
+}
+
+
+/**
+ * bnx2i_find_ep_in_destroy_list - find iscsi_cid in destroy list
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+	struct list_head *list;
+	struct list_head *tmp;
+	struct bnx2i_endpoint *ep;
+
+	read_lock_bh(&hba->ep_rdwr_lock);
+	list_for_each_safe(list, tmp, &hba->ep_destroy_list) {
+		ep = (struct bnx2i_endpoint *)list;
+
+		if (ep->ep_iscsi_cid == iscsi_cid)
+			break;
+		ep = NULL;
+	}
+	read_unlock_bh(&hba->ep_rdwr_lock);
+
+	if (!ep)
+		printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+
+	return ep;
+}
+
+/**
+ * bnx2i_setup_host_queue_size - assigns shost->can_queue param
+ * @hba:	pointer to adapter instance
+ * @shost:	scsi host pointer
+ *
+ * Initializes 'can_queue' parameter based on how many outstanding commands
+ * 	the device can handle. Each device 5708/5709/57710 has different
+ *	capabilities
+ */
+static void bnx2i_setup_host_queue_size(struct bnx2i_hba *hba,
+					struct Scsi_Host *shost)
+{
+	if (test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+	else if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5709;
+	else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_57710;
+	else
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+}
+
+
+/**
+ * bnx2i_alloc_hba - allocate and init adapter instance
+ * @cnic:	cnic device pointer
+ *
+ * allocate & initialize adapter structure and call other
+ *	support routines to do per adapter initialization
+ */
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
+{
+	struct Scsi_Host *shost;
+	struct bnx2i_hba *hba;
+
+	shost = iscsi_host_alloc(&bnx2i_host_template, sizeof(*hba), 0);
+	if (!shost)
+		return NULL;
+	shost->dma_boundary = cnic->pcidev->dma_mask;
+	shost->transportt = bnx2i_scsi_xport_template;
+	shost->max_id = ISCSI_MAX_CONNS_PER_HBA;
+	shost->max_channel = 0;
+	shost->max_lun = 512;
+	shost->max_cmd_len = 16;
+
+	hba = iscsi_host_priv(shost);
+	hba->shost = shost;
+	hba->netdev = cnic->netdev;
+	/* Get PCI related information and update hba struct members */
+	hba->pcidev = cnic->pcidev;
+	pci_dev_get(hba->pcidev);
+	hba->pci_did = hba->pcidev->device;
+	hba->pci_vid = hba->pcidev->vendor;
+	hba->pci_sdid = hba->pcidev->subsystem_device;
+	hba->pci_svid = hba->pcidev->subsystem_vendor;
+	hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
+	hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
+	bnx2i_identify_device(hba);
+
+	bnx2i_identify_device(hba);
+	bnx2i_setup_host_queue_size(hba, shost);
+
+	if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+		hba->regview = ioremap_nocache(hba->netdev->base_addr,
+					       BNX2_MQ_CONFIG2);
+		if (!hba->regview)
+			goto ioreg_map_err;
+	} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+		if (!hba->regview)
+			goto ioreg_map_err;
+	}
+
+	if (bnx2i_setup_mp_bdt(hba))
+		goto mp_bdt_mem_err;
+
+	INIT_LIST_HEAD(&hba->ep_ofld_list);
+	INIT_LIST_HEAD(&hba->ep_destroy_list);
+	rwlock_init(&hba->ep_rdwr_lock);
+
+	hba->mtu_supported = BNX2I_MAX_MTU_SUPPORTED;
+
+	/* different values for 5708/5709/57710 */
+	hba->max_active_conns = ISCSI_MAX_CONNS_PER_HBA;
+
+	if (bnx2i_setup_free_cid_que(hba))
+		goto cid_que_err;
+
+	/* SQ/RQ/CQ size can be changed via sysfx interface */
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		if (sq_size && sq_size <= BNX2I_5770X_SQ_WQES_MAX)
+			hba->max_sqes = sq_size;
+		else
+			hba->max_sqes = BNX2I_5770X_SQ_WQES_DEFAULT;
+	} else {	/* 5706/5708/5709 */
+		if (sq_size && sq_size <= BNX2I_570X_SQ_WQES_MAX)
+			hba->max_sqes = sq_size;
+		else
+			hba->max_sqes = BNX2I_570X_SQ_WQES_DEFAULT;
+	}
+
+	hba->max_rqes = rq_size;
+	hba->max_cqes = hba->max_sqes + rq_size;
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		if (hba->max_cqes > BNX2I_5770X_CQ_WQES_MAX)
+			hba->max_cqes = BNX2I_5770X_CQ_WQES_MAX;
+	} else if (hba->max_cqes > BNX2I_570X_CQ_WQES_MAX)
+		hba->max_cqes = BNX2I_570X_CQ_WQES_MAX;
+
+	hba->num_ccell = hba->max_sqes / 2;
+
+	spin_lock_init(&hba->lock);
+	mutex_init(&hba->net_dev_lock);
+
+	if (iscsi_host_add(shost, &hba->pcidev->dev))
+		goto free_dump_mem;
+	return hba;
+
+free_dump_mem:
+	bnx2i_release_free_cid_que(hba);
+cid_que_err:
+	bnx2i_free_mp_bdt(hba);
+mp_bdt_mem_err:
+	if (hba->regview) {
+		iounmap(hba->regview);
+		hba->regview = NULL;
+	}
+ioreg_map_err:
+	pci_dev_put(hba->pcidev);
+	scsi_host_put(shost);
+	return NULL;
+}
+
+/**
+ * bnx2i_free_hba- releases hba structure and resources held by the adapter
+ * @hba:	pointer to adapter instance
+ *
+ * free adapter structure and call various cleanup routines.
+ */
+void bnx2i_free_hba(struct bnx2i_hba *hba)
+{
+	struct Scsi_Host *shost = hba->shost;
+
+	iscsi_host_remove(shost);
+	INIT_LIST_HEAD(&hba->ep_ofld_list);
+	INIT_LIST_HEAD(&hba->ep_destroy_list);
+	pci_dev_put(hba->pcidev);
+
+	if (hba->regview) {
+		iounmap(hba->regview);
+		hba->regview = NULL;
+	}
+	bnx2i_free_mp_bdt(hba);
+	bnx2i_release_free_cid_que(hba);
+	iscsi_host_free(shost);
+}
+
+/**
+ * bnx2i_conn_free_login_resources - free DMA resources used for login process
+ * @hba:		pointer to adapter instance
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Login related resources, mostly BDT & payload DMA memory is freed
+ */
+static void bnx2i_conn_free_login_resources(struct bnx2i_hba *hba,
+					    struct bnx2i_conn *bnx2i_conn)
+{
+	if (bnx2i_conn->gen_pdu.resp_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  bnx2i_conn->gen_pdu.resp_bd_tbl,
+				  bnx2i_conn->gen_pdu.resp_bd_dma);
+		bnx2i_conn->gen_pdu.resp_bd_tbl = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.req_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  bnx2i_conn->gen_pdu.req_bd_tbl,
+				  bnx2i_conn->gen_pdu.req_bd_dma);
+		bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.resp_buf) {
+		dma_free_coherent(&hba->pcidev->dev,
+				  ISCSI_DEF_MAX_RECV_SEG_LEN,
+				  bnx2i_conn->gen_pdu.resp_buf,
+				  bnx2i_conn->gen_pdu.resp_dma_addr);
+		bnx2i_conn->gen_pdu.resp_buf = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.req_buf) {
+		dma_free_coherent(&hba->pcidev->dev,
+				  ISCSI_DEF_MAX_RECV_SEG_LEN,
+				  bnx2i_conn->gen_pdu.req_buf,
+				  bnx2i_conn->gen_pdu.req_dma_addr);
+		bnx2i_conn->gen_pdu.req_buf = NULL;
+	}
+}
+
+/**
+ * bnx2i_conn_alloc_login_resources - alloc DMA resources for login/nop.
+ * @hba:		pointer to adapter instance
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Mgmt task DNA resources are allocated in this routine.
+ */
+static int bnx2i_conn_alloc_login_resources(struct bnx2i_hba *hba,
+					    struct bnx2i_conn *bnx2i_conn)
+{
+	/* Allocate memory for login request/response buffers */
+	bnx2i_conn->gen_pdu.req_buf =
+		dma_alloc_coherent(&hba->pcidev->dev,
+				   ISCSI_DEF_MAX_RECV_SEG_LEN,
+				   &bnx2i_conn->gen_pdu.req_dma_addr,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.req_buf == NULL)
+		goto login_req_buf_failure;
+
+	bnx2i_conn->gen_pdu.req_buf_size = 0;
+	bnx2i_conn->gen_pdu.req_wr_ptr = bnx2i_conn->gen_pdu.req_buf;
+
+	bnx2i_conn->gen_pdu.resp_buf =
+		dma_alloc_coherent(&hba->pcidev->dev,
+				   ISCSI_DEF_MAX_RECV_SEG_LEN,
+				   &bnx2i_conn->gen_pdu.resp_dma_addr,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.resp_buf == NULL)
+		goto login_resp_buf_failure;
+
+	bnx2i_conn->gen_pdu.resp_buf_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
+	bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf;
+
+	bnx2i_conn->gen_pdu.req_bd_tbl =
+		dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				   &bnx2i_conn->gen_pdu.req_bd_dma, GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.req_bd_tbl == NULL)
+		goto login_req_bd_tbl_failure;
+
+	bnx2i_conn->gen_pdu.resp_bd_tbl =
+		dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				   &bnx2i_conn->gen_pdu.resp_bd_dma,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.resp_bd_tbl == NULL)
+		goto login_resp_bd_tbl_failure;
+
+	return 0;
+
+login_resp_bd_tbl_failure:
+	dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+			  bnx2i_conn->gen_pdu.req_bd_tbl,
+			  bnx2i_conn->gen_pdu.req_bd_dma);
+	bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+
+login_req_bd_tbl_failure:
+	dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+			  bnx2i_conn->gen_pdu.resp_buf,
+			  bnx2i_conn->gen_pdu.resp_dma_addr);
+	bnx2i_conn->gen_pdu.resp_buf = NULL;
+login_resp_buf_failure:
+	dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+			  bnx2i_conn->gen_pdu.req_buf,
+			  bnx2i_conn->gen_pdu.req_dma_addr);
+	bnx2i_conn->gen_pdu.req_buf = NULL;
+login_req_buf_failure:
+	iscsi_conn_printk(KERN_ERR, bnx2i_conn->cls_conn->dd_data,
+			  "login resource alloc failed!!\n");
+	return -ENOMEM;
+
+}
+
+
+/**
+ * bnx2i_iscsi_prep_generic_pdu_bd - prepares BD table.
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Allocates buffers and BD tables before shipping requests to cnic
+ *	for PDUs prepared by 'iscsid' daemon
+ */
+static void bnx2i_iscsi_prep_generic_pdu_bd(struct bnx2i_conn *bnx2i_conn)
+{
+	struct iscsi_bd *bd_tbl;
+
+	bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.req_bd_tbl;
+
+	bd_tbl->buffer_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.req_dma_addr >> 32);
+	bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.req_dma_addr;
+	bd_tbl->buffer_length = bnx2i_conn->gen_pdu.req_wr_ptr -
+				bnx2i_conn->gen_pdu.req_buf;
+	bd_tbl->reserved0 = 0;
+	bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+	bd_tbl = (struct iscsi_bd  *) bnx2i_conn->gen_pdu.resp_bd_tbl;
+	bd_tbl->buffer_addr_hi = (u64) bnx2i_conn->gen_pdu.resp_dma_addr >> 32;
+	bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_dma_addr;
+	bd_tbl->buffer_length = ISCSI_DEF_MAX_RECV_SEG_LEN;
+	bd_tbl->reserved0 = 0;
+	bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+}
+
+
+/**
+ * bnx2i_iscsi_send_generic_request - called to send mgmt tasks.
+ * @task:	transport layer task pointer
+ *
+ * called to transmit PDUs prepared by the 'iscsid' daemon. iSCSI login,
+ *	Nop-out and Logout requests flow through this path.
+ */
+static int bnx2i_iscsi_send_generic_request(struct iscsi_task *task)
+{
+	struct bnx2i_cmd *cmd = task->dd_data;
+	struct bnx2i_conn *bnx2i_conn = cmd->conn;
+	int rc = 0;
+	char *buf;
+	int data_len;
+
+	bnx2i_iscsi_prep_generic_pdu_bd(bnx2i_conn);
+	switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+	case ISCSI_OP_LOGIN:
+		bnx2i_send_iscsi_login(bnx2i_conn, task);
+		break;
+	case ISCSI_OP_NOOP_OUT:
+		data_len = bnx2i_conn->gen_pdu.req_buf_size;
+		buf = bnx2i_conn->gen_pdu.req_buf;
+		if (data_len)
+			rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+						     RESERVED_ITT,
+						     buf, data_len, 1);
+		else
+			rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+						     RESERVED_ITT,
+						     NULL, 0, 1);
+		break;
+	case ISCSI_OP_LOGOUT:
+		rc = bnx2i_send_iscsi_logout(bnx2i_conn, task);
+		break;
+	case ISCSI_OP_SCSI_TMFUNC:
+		rc = bnx2i_send_iscsi_tmf(bnx2i_conn, task);
+		break;
+	default:
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				  "send_gen: unsupported op 0x%x\n",
+				  task->hdr->opcode);
+	}
+	return rc;
+}
+
+
+/**********************************************************************
+ *		SCSI-ML Interface
+ **********************************************************************/
+
+/**
+ * bnx2i_cpy_scsi_cdb - copies LUN & CDB fields in required format to sq wqe
+ * @sc:		SCSI-ML command pointer
+ * @cmd:	iscsi cmd pointer
+ */
+static void bnx2i_cpy_scsi_cdb(struct scsi_cmnd *sc, struct bnx2i_cmd *cmd)
+{
+	u32 dword;
+	int lpcnt;
+	u8 *srcp;
+	u32 *dstp;
+	u32 scsi_lun[2];
+
+	int_to_scsilun(sc->device->lun, (struct scsi_lun *) scsi_lun);
+	cmd->req.lun[0] = be32_to_cpu(scsi_lun[0]);
+	cmd->req.lun[1] = be32_to_cpu(scsi_lun[1]);
+
+	lpcnt = cmd->scsi_cmd->cmd_len / sizeof(dword);
+	srcp = (u8 *) sc->cmnd;
+	dstp = (u32 *) cmd->req.cdb;
+	while (lpcnt--) {
+		memcpy(&dword, (const void *) srcp, 4);
+		*dstp = cpu_to_be32(dword);
+		srcp += 4;
+		dstp++;
+	}
+	if (sc->cmd_len & 0x3) {
+		dword = (u32) srcp[0] | ((u32) srcp[1] << 8);
+		*dstp = cpu_to_be32(dword);
+	}
+}
+
+static void bnx2i_cleanup_task(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_hba *hba = bnx2i_conn->hba;
+
+	/*
+	 * mgmt task or cmd was never sent to us to transmit.
+	 */
+	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+		return;
+	/*
+	 * need to clean-up task context to claim dma buffers
+	 */
+	if (task->state == ISCSI_TASK_ABRT_TMF) {
+		bnx2i_send_cmd_cleanup_req(hba, task->dd_data);
+
+		spin_unlock_bh(&conn->session->lock);
+		wait_for_completion_timeout(&bnx2i_conn->cmd_cleanup_cmpl,
+				msecs_to_jiffies(ISCSI_CMD_CLEANUP_TIMEOUT));
+		spin_lock_bh(&conn->session->lock);
+	}
+	bnx2i_iscsi_unmap_sg_list(task->dd_data);
+}
+
+/**
+ * bnx2i_mtask_xmit - transmit mtask to chip for further processing
+ * @conn:	transport layer conn structure pointer
+ * @task:	transport layer command structure pointer
+ */
+static int
+bnx2i_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task)
+{
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_cmd *cmd = task->dd_data;
+
+	memset(bnx2i_conn->gen_pdu.req_buf, 0, ISCSI_DEF_MAX_RECV_SEG_LEN);
+
+	bnx2i_setup_cmd_wqe_template(cmd);
+	bnx2i_conn->gen_pdu.req_buf_size = task->data_count;
+	if (task->data_count) {
+		memcpy(bnx2i_conn->gen_pdu.req_buf, task->data,
+		       task->data_count);
+		bnx2i_conn->gen_pdu.req_wr_ptr =
+			bnx2i_conn->gen_pdu.req_buf + task->data_count;
+	}
+	cmd->conn = conn->dd_data;
+	cmd->scsi_cmd = NULL;
+	return bnx2i_iscsi_send_generic_request(task);
+}
+
+/**
+ * bnx2i_task_xmit - transmit iscsi command to chip for further processing
+ * @task:	transport layer command structure pointer
+ *
+ * maps SG buffers and send request to chip/firmware in the form of SQ WQE
+ */
+static int bnx2i_task_xmit(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct iscsi_session *session = conn->session;
+	struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct scsi_cmnd *sc = task->sc;
+	struct bnx2i_cmd *cmd = task->dd_data;
+	struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr;
+
+	if (test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+		return -ENOTCONN;
+
+	if (!bnx2i_conn->is_bound)
+		return -ENOTCONN;
+
+	/*
+	 * If there is no scsi_cmnd this must be a mgmt task
+	 */
+	if (!sc)
+		return bnx2i_mtask_xmit(conn, task);
+
+	bnx2i_setup_cmd_wqe_template(cmd);
+	cmd->req.op_code = ISCSI_OP_SCSI_CMD;
+	cmd->conn = bnx2i_conn;
+	cmd->scsi_cmd = sc;
+	cmd->req.total_data_transfer_length = scsi_bufflen(sc);
+	cmd->req.cmd_sn = be32_to_cpu(hdr->cmdsn);
+
+	bnx2i_iscsi_map_sg_list(cmd);
+	bnx2i_cpy_scsi_cdb(sc, cmd);
+
+	cmd->req.op_attr = ISCSI_ATTR_SIMPLE;
+	if (sc->sc_data_direction == DMA_TO_DEVICE) {
+		cmd->req.op_attr |= ISCSI_CMD_REQUEST_WRITE;
+		cmd->req.itt = task->itt |
+			(ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+		bnx2i_setup_write_cmd_bd_info(task);
+	} else {
+		if (scsi_bufflen(sc))
+			cmd->req.op_attr |= ISCSI_CMD_REQUEST_READ;
+		cmd->req.itt = task->itt |
+			(ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	}
+
+	cmd->req.num_bds = cmd->io_tbl.bd_valid;
+	if (!cmd->io_tbl.bd_valid) {
+		cmd->req.bd_list_addr_lo = (u32) hba->mp_bd_dma;
+		cmd->req.bd_list_addr_hi = (u32) ((u64) hba->mp_bd_dma >> 32);
+		cmd->req.num_bds = 1;
+	}
+
+	bnx2i_send_iscsi_scsicmd(bnx2i_conn, cmd);
+	return 0;
+}
+
+/**
+ * bnx2i_session_create - create a new iscsi session
+ * @cmds_max:		max commands supported
+ * @qdepth:		scsi queue depth to support
+ * @initial_cmdsn:	initial iscsi CMDSN to be used for this session
+ *
+ * Creates a new iSCSI session instance on given device.
+ */
+static struct iscsi_cls_session *
+bnx2i_session_create(struct iscsi_endpoint *ep,
+		     uint16_t cmds_max, uint16_t qdepth,
+		     uint32_t initial_cmdsn)
+{
+	struct Scsi_Host *shost;
+	struct iscsi_cls_session *cls_session;
+	struct bnx2i_hba *hba;
+	struct bnx2i_endpoint *bnx2i_ep;
+
+	if (!ep) {
+		printk(KERN_ERR "bnx2i: missing ep.\n");
+		return NULL;
+	}
+
+	bnx2i_ep = ep->dd_data;
+	shost = bnx2i_ep->hba->shost;
+	hba = iscsi_host_priv(shost);
+	if (bnx2i_adapter_ready(hba))
+		return NULL;
+
+	/*
+	 * user can override hw limit as long as it is within
+	 * the min/max.
+	 */
+	if (cmds_max > hba->max_sqes)
+		cmds_max = hba->max_sqes;
+	else if (cmds_max < BNX2I_SQ_WQES_MIN)
+		cmds_max = BNX2I_SQ_WQES_MIN;
+
+	cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
+					  cmds_max, sizeof(struct bnx2i_cmd),
+					  initial_cmdsn, ISCSI_MAX_TARGET);
+	if (!cls_session)
+		return NULL;
+
+	if (bnx2i_setup_cmd_pool(hba, cls_session->dd_data))
+		goto session_teardown;
+	return cls_session;
+
+session_teardown:
+	iscsi_session_teardown(cls_session);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_session_destroy - destroys iscsi session
+ * @cls_session:	pointer to iscsi cls session
+ *
+ * Destroys previously created iSCSI session instance and releases
+ *	all resources held by it
+ */
+static void bnx2i_session_destroy(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *session = cls_session->dd_data;
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+
+	bnx2i_destroy_cmd_pool(hba, session);
+	iscsi_session_teardown(cls_session);
+}
+
+
+/**
+ * bnx2i_conn_create - create iscsi connection instance
+ * @cls_session:	pointer to iscsi cls session
+ * @cid:		iscsi cid as per rfc (not NX2's CID terminology)
+ *
+ * Creates a new iSCSI connection instance for a given session
+ */
+static struct iscsi_cls_conn *
+bnx2i_conn_create(struct iscsi_cls_session *cls_session, uint32_t cid)
+{
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_conn *bnx2i_conn;
+	struct iscsi_cls_conn *cls_conn;
+	struct iscsi_conn *conn;
+
+	cls_conn = iscsi_conn_setup(cls_session, sizeof(*bnx2i_conn),
+				    cid);
+	if (!cls_conn)
+		return NULL;
+	conn = cls_conn->dd_data;
+
+	bnx2i_conn = conn->dd_data;
+	bnx2i_conn->cls_conn = cls_conn;
+	bnx2i_conn->hba = hba;
+	/* 'ep' ptr will be assigned in bind() call */
+	bnx2i_conn->ep = NULL;
+	init_completion(&bnx2i_conn->cmd_cleanup_cmpl);
+
+	if (bnx2i_conn_alloc_login_resources(hba, bnx2i_conn)) {
+		iscsi_conn_printk(KERN_ALERT, conn,
+				  "conn_new: login resc alloc failed!!\n");
+		goto free_conn;
+	}
+
+	return cls_conn;
+
+free_conn:
+	iscsi_conn_teardown(cls_conn);
+	return NULL;
+}
+
+/**
+ * bnx2i_conn_bind - binds iscsi sess, conn and ep objects together
+ * @cls_session:	pointer to iscsi cls session
+ * @cls_conn:		pointer to iscsi cls conn
+ * @transport_fd:	64-bit EP handle
+ * @is_leading:		leading connection on this session?
+ *
+ * Binds together iSCSI session instance, iSCSI connection instance
+ *	and the TCP connection. This routine returns error code if
+ *	TCP connection does not belong on the device iSCSI sess/conn
+ *	is bound
+ */
+static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
+			   struct iscsi_cls_conn *cls_conn,
+			   uint64_t transport_fd, int is_leading)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct iscsi_endpoint *ep;
+	int ret_code;
+
+	ep = iscsi_lookup_endpoint(transport_fd);
+	if (!ep)
+		return -EINVAL;
+
+	bnx2i_ep = ep->dd_data;
+	if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
+	    (bnx2i_ep->state == EP_STATE_TCP_RST_RCVD))
+		/* Peer disconnect via' FIN or RST */
+		return -EINVAL;
+
+	if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+		return -EINVAL;
+
+	if (bnx2i_ep->hba != hba) {
+		/* Error - TCP connection does not belong to this device
+		 */
+		iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+				  "conn bind, ep=0x%p (%s) does not",
+				  bnx2i_ep, bnx2i_ep->hba->netdev->name);
+		iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+				  "belong to hba (%s)\n",
+				  hba->netdev->name);
+		return -EEXIST;
+	}
+
+	bnx2i_ep->conn = bnx2i_conn;
+	bnx2i_conn->ep = bnx2i_ep;
+	bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
+	bnx2i_conn->fw_cid = bnx2i_ep->ep_cid;
+	bnx2i_conn->is_bound = 1;
+
+	ret_code = bnx2i_bind_conn_to_iscsi_cid(hba, bnx2i_conn,
+						bnx2i_ep->ep_iscsi_cid);
+
+	/* 5706/5708/5709 FW takes RQ as full when initiated, but for 57710
+	 * driver needs to explicitly replenish RQ index during setup.
+	 */
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+		bnx2i_put_rq_buf(bnx2i_conn, 0);
+
+	bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+	return ret_code;
+}
+
+
+/**
+ * bnx2i_conn_destroy - destroy iscsi connection instance & release resources
+ * @cls_conn:	pointer to iscsi cls conn
+ *
+ * Destroy an iSCSI connection instance and release memory resources held by
+ *	this connection
+ */
+static void bnx2i_conn_destroy(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct Scsi_Host *shost;
+	struct bnx2i_hba *hba;
+
+	shost = iscsi_session_to_shost(iscsi_conn_to_session(cls_conn));
+	hba = iscsi_host_priv(shost);
+
+	bnx2i_conn_free_login_resources(hba, bnx2i_conn);
+	iscsi_conn_teardown(cls_conn);
+}
+
+
+/**
+ * bnx2i_conn_get_param - return iscsi connection parameter to caller
+ * @cls_conn:	pointer to iscsi cls conn
+ * @param:	parameter type identifier
+ * @buf: 	buffer pointer
+ *
+ * returns iSCSI connection parameters
+ */
+static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
+				enum iscsi_param param, char *buf)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_PORT:
+		if (bnx2i_conn->ep)
+			len = sprintf(buf, "%hu\n",
+				      bnx2i_conn->ep->cm_sk->dst_port);
+		break;
+	case ISCSI_PARAM_CONN_ADDRESS:
+		if (bnx2i_conn->ep)
+			len = sprintf(buf, NIPQUAD_FMT "\n",
+				      NIPQUAD(bnx2i_conn->ep->cm_sk->dst_ip));
+		break;
+	default:
+		return iscsi_conn_get_param(cls_conn, param, buf);
+	}
+
+	return len;
+}
+
+/**
+ * bnx2i_host_get_param - returns host (adapter) related parameters
+ * @shost:	scsi host pointer
+ * @param:	parameter type identifier
+ * @buf:	buffer pointer
+ */
+static int bnx2i_host_get_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf)
+{
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_HOST_PARAM_HWADDRESS:
+		len = sysfs_format_mac(buf, hba->cnic->mac_addr, 6);
+		break;
+	case ISCSI_HOST_PARAM_NETDEV_NAME:
+		len = sprintf(buf, "%s\n", hba->netdev->name);
+		break;
+	default:
+		return iscsi_host_get_param(shost, param, buf);
+	}
+	return len;
+}
+
+/**
+ * bnx2i_conn_start - completes iscsi connection migration to FFP
+ * @cls_conn:	pointer to iscsi cls conn
+ *
+ * last call in FFP migration to handover iscsi conn to the driver
+ */
+static int bnx2i_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+
+	bnx2i_conn->ep->state = EP_STATE_ULP_UPDATE_START;
+	bnx2i_update_iscsi_conn(conn);
+
+	/*
+	 * this should normally not sleep for a long time so it should
+	 * not disrupt the caller.
+	 */
+	bnx2i_conn->ep->ofld_timer.expires = 1 * HZ + jiffies;
+	bnx2i_conn->ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_conn->ep->ofld_timer.data = (unsigned long) bnx2i_conn->ep;
+	add_timer(&bnx2i_conn->ep->ofld_timer);
+	/* update iSCSI context for this conn, wait for CNIC to complete */
+	wait_event_interruptible(bnx2i_conn->ep->ofld_wait,
+			bnx2i_conn->ep->state != EP_STATE_ULP_UPDATE_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_conn->ep->ofld_timer);
+
+	iscsi_conn_start(cls_conn);
+	return 0;
+}
+
+
+/**
+ * bnx2i_conn_get_stats - returns iSCSI stats
+ * @cls_conn:	pointer to iscsi cls conn
+ * @stats:	pointer to iscsi statistic struct
+ */
+static void bnx2i_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+				 struct iscsi_stats *stats)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+
+	stats->txdata_octets = conn->txdata_octets;
+	stats->rxdata_octets = conn->rxdata_octets;
+	stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+	stats->dataout_pdus = conn->dataout_pdus_cnt;
+	stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+	stats->datain_pdus = conn->datain_pdus_cnt;
+	stats->r2t_pdus = conn->r2t_pdus_cnt;
+	stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+	stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+	stats->custom_length = 3;
+	strcpy(stats->custom[2].desc, "eh_abort_cnt");
+	stats->custom[2].value = conn->eh_abort_cnt;
+	stats->digest_err = 0;
+	stats->timeout_err = 0;
+	stats->custom_length = 0;
+}
+
+
+/**
+ * bnx2i_check_route - checks if target IP route belongs to one of NX2 devices
+ * @dst_addr:	target IP address
+ *
+ * check if route resolves to BNX2 device
+ */
+static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
+{
+	struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+	struct bnx2i_hba *hba;
+	struct cnic_dev *cnic = NULL;
+
+	bnx2i_reg_dev_all();
+
+	hba = get_adapter_list_head();
+	if (hba && hba->cnic)
+		cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
+	if (!cnic) {
+		printk(KERN_ALERT "bnx2i: no route,"
+		       "can't connect using cnic\n");
+		goto no_nx2_route;
+	}
+	hba = bnx2i_find_hba_for_cnic(cnic);
+	if (!hba)
+		goto no_nx2_route;
+
+	if (bnx2i_adapter_ready(hba)) {
+		printk(KERN_ALERT "bnx2i: check route, hba not found\n");
+		goto no_nx2_route;
+	}
+	if (hba->netdev->mtu > hba->mtu_supported) {
+		printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n",
+				  hba->netdev->name, hba->netdev->mtu);
+		printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n",
+				  hba->mtu_supported);
+		goto no_nx2_route;
+	}
+	return hba;
+no_nx2_route:
+	return NULL;
+}
+
+
+/**
+ * bnx2i_tear_down_conn - tear down iscsi/tcp connection and free resources
+ * @hba:	pointer to adapter instance
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * destroys cm_sock structure and on chip iscsi context
+ */
+static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
+				 struct bnx2i_endpoint *ep)
+{
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+		hba->cnic->cm_destroy(ep->cm_sk);
+
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+		ep->state = EP_STATE_DISCONN_COMPL;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
+	    ep->state == EP_STATE_DISCONN_TIMEDOUT) {
+		printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
+				  " NW/PCIe trace, driver msgs to developers"
+				  " for analysis\n");
+		return 1;
+	}
+
+	ep->state = EP_STATE_CLEANUP_START;
+	init_timer(&ep->ofld_timer);
+	ep->ofld_timer.expires = 10*HZ + jiffies;
+	ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	ep->ofld_timer.data = (unsigned long) ep;
+	add_timer(&ep->ofld_timer);
+
+	bnx2i_ep_destroy_list_add(hba, ep);
+
+	/* destroy iSCSI context, wait for it to complete */
+	bnx2i_send_conn_destroy(hba, ep);
+	wait_event_interruptible(ep->ofld_wait,
+				 (ep->state != EP_STATE_CLEANUP_START));
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&ep->ofld_timer);
+
+	bnx2i_ep_destroy_list_del(hba, ep);
+
+	if (ep->state != EP_STATE_CLEANUP_CMPL)
+		/* should never happen */
+		printk(KERN_ALERT "bnx2i - conn destroy failed\n");
+
+	return 0;
+}
+
+
+/**
+ * bnx2i_ep_connect - establish TCP connection to target portal
+ * @shost:		scsi host
+ * @dst_addr:		target IP address
+ * @non_blocking:	blocking or non-blocking call
+ *
+ * this routine initiates the TCP/IP connection by invoking Option-2 i/f
+ *	with l5_core and the CNIC. This is a multi-step process of resolving
+ *	route to target, create a iscsi connection context, handshaking with
+ *	CNIC module to create/initialize the socket struct and finally
+ *	sending down option-2 request to complete TCP 3-way handshake
+ */
+static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
+					       struct sockaddr *dst_addr,
+					       int non_blocking)
+{
+	u32 iscsi_cid = BNX2I_CID_RESERVED;
+	struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+	struct sockaddr_in6 *desti6;
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct bnx2i_hba *hba;
+	struct cnic_dev *cnic;
+	struct cnic_sockaddr saddr;
+	struct iscsi_endpoint *ep;
+	int rc = 0;
+
+	if (shost)
+		/* driver is given scsi host to work with */
+		hba = iscsi_host_priv(shost);
+	else
+		/*
+		 * check if the given destination can be reached through
+		 * a iscsi capable NetXtreme2 device
+		 */
+		hba = bnx2i_check_route(dst_addr);
+	if (!hba) {
+		rc = -ENOMEM;
+		goto check_busy;
+	}
+
+	cnic = hba->cnic;
+	ep = bnx2i_alloc_ep(hba);
+	if (!ep) {
+		rc = -ENOMEM;
+		goto check_busy;
+	}
+	bnx2i_ep = ep->dd_data;
+
+	mutex_lock(&hba->net_dev_lock);
+	if (bnx2i_adapter_ready(hba)) {
+		rc = -EPERM;
+		goto net_if_down;
+	}
+
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->ep_iscsi_cid = (u16) -1;
+	bnx2i_ep->num_active_cmds = 0;
+	iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
+	if (iscsi_cid == -1) {
+		printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+		rc = -ENOMEM;
+		goto iscsi_cid_err;
+	}
+	bnx2i_ep->hba_age = hba->age;
+
+	rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
+	if (rc != 0) {
+		printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+		rc = -ENOMEM;
+		goto qp_resc_err;
+	}
+
+	bnx2i_ep->ep_iscsi_cid = (u16)iscsi_cid;
+	bnx2i_ep->state = EP_STATE_OFLD_START;
+	bnx2i_ep_ofld_list_add(hba, bnx2i_ep);
+
+	init_timer(&bnx2i_ep->ofld_timer);
+	bnx2i_ep->ofld_timer.expires = 2 * HZ + jiffies;
+	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+	add_timer(&bnx2i_ep->ofld_timer);
+
+	bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+
+	/* Wait for CNIC hardware to setup conn context and return 'cid' */
+	wait_event_interruptible(bnx2i_ep->ofld_wait,
+				 bnx2i_ep->state != EP_STATE_OFLD_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_ep->ofld_timer);
+
+	bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+
+	if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
+		rc = -ENOSPC;
+		goto conn_failed;
+	}
+
+	rc = cnic->cm_create(cnic, CNIC_ULP_ISCSI, bnx2i_ep->ep_cid,
+			     iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
+	if (rc) {
+		rc = -EINVAL;
+		goto conn_failed;
+	}
+
+	bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
+	bnx2i_ep->cm_sk->snd_buf = 256 * 1024;
+	clear_bit(SK_TCP_TIMESTAMP, &bnx2i_ep->cm_sk->tcp_flags);
+
+	memset(&saddr, 0, sizeof(saddr));
+	if (dst_addr->sa_family == AF_INET) {
+		desti = (struct sockaddr_in *) dst_addr;
+		saddr.remote.v4 = *desti;
+		saddr.local.v4.sin_family = desti->sin_family;
+	} else if (dst_addr->sa_family == AF_INET6) {
+		desti6 = (struct sockaddr_in6 *) dst_addr;
+		saddr.remote.v6 = *desti6;
+		saddr.local.v6.sin6_family = desti6->sin6_family;
+	}
+
+	bnx2i_ep->timestamp = jiffies;
+	bnx2i_ep->state = EP_STATE_CONNECT_START;
+	if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		rc = -EINVAL;
+		goto conn_failed;
+	} else
+		rc = cnic->cm_connect(bnx2i_ep->cm_sk, &saddr);
+
+	if (rc)
+		goto release_ep;
+
+	if (bnx2i_map_ep_dbell_regs(bnx2i_ep))
+		goto release_ep;
+	mutex_unlock(&hba->net_dev_lock);
+	return ep;
+
+release_ep:
+	if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+		mutex_unlock(&hba->net_dev_lock);
+		return ERR_PTR(rc);
+	}
+conn_failed:
+net_if_down:
+iscsi_cid_err:
+	bnx2i_free_qp_resc(hba, bnx2i_ep);
+qp_resc_err:
+	bnx2i_free_ep(ep);
+	mutex_unlock(&hba->net_dev_lock);
+check_busy:
+	bnx2i_unreg_dev_all();
+	return ERR_PTR(rc);
+}
+
+
+/**
+ * bnx2i_ep_poll - polls for TCP connection establishement
+ * @ep:			TCP connection (endpoint) handle
+ * @timeout_ms:		timeout value in milli secs
+ *
+ * polls for TCP connect request to complete
+ */
+static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	int rc = 0;
+
+	bnx2i_ep = ep->dd_data;
+	if ((bnx2i_ep->state == EP_STATE_IDLE) ||
+	    (bnx2i_ep->state == EP_STATE_CONNECT_FAILED) ||
+	    (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+		return -1;
+	if (bnx2i_ep->state == EP_STATE_CONNECT_COMPL)
+		return 1;
+
+	rc = wait_event_interruptible_timeout(bnx2i_ep->ofld_wait,
+					      ((bnx2i_ep->state ==
+						EP_STATE_OFLD_FAILED) ||
+					       (bnx2i_ep->state ==
+						EP_STATE_CONNECT_FAILED) ||
+					       (bnx2i_ep->state ==
+						EP_STATE_CONNECT_COMPL)),
+					      msecs_to_jiffies(timeout_ms));
+	if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+		rc = -1;
+
+	if (rc > 0)
+		return 1;
+	else if (!rc)
+		return 0;	/* timeout */
+	else
+		return rc;
+}
+
+
+/**
+ * bnx2i_ep_tcp_conn_active - check EP state transition
+ * @ep:		endpoint pointer
+ *
+ * check if underlying TCP connection is active
+ */
+static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
+{
+	int ret;
+	int cnic_dev_10g = 0;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+		cnic_dev_10g = 1;
+
+	switch (bnx2i_ep->state) {
+	case EP_STATE_CONNECT_START:
+	case EP_STATE_CLEANUP_FAILED:
+	case EP_STATE_OFLD_FAILED:
+	case EP_STATE_DISCONN_TIMEDOUT:
+		ret = 0;
+		break;
+	case EP_STATE_CONNECT_COMPL:
+	case EP_STATE_ULP_UPDATE_START:
+	case EP_STATE_ULP_UPDATE_COMPL:
+	case EP_STATE_TCP_FIN_RCVD:
+	case EP_STATE_ULP_UPDATE_FAILED:
+		ret = 1;
+		break;
+	case EP_STATE_TCP_RST_RCVD:
+		ret = 0;
+		break;
+	case EP_STATE_CONNECT_FAILED:
+		if (cnic_dev_10g)
+			ret = 1;
+		else
+			ret = 0;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+
+/**
+ * bnx2i_ep_disconnect - executes TCP connection teardown process
+ * @ep:		TCP connection (endpoint) handle
+ *
+ * executes  TCP connection teardown process
+ */
+static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct bnx2i_conn *bnx2i_conn = NULL;
+	struct iscsi_session *session = NULL;
+	struct iscsi_conn *conn;
+	struct cnic_dev *cnic;
+	struct bnx2i_hba *hba;
+
+	bnx2i_ep = ep->dd_data;
+
+	/* driver should not attempt connection cleanup untill TCP_CONNECT
+	 * completes either successfully or fails. Timeout is 9-secs, so
+	 * wait for it to complete
+	 */
+	while ((bnx2i_ep->state == EP_STATE_CONNECT_START) &&
+		!time_after(jiffies, bnx2i_ep->timestamp + (12 * HZ)))
+		msleep(250);
+
+	if (bnx2i_ep->conn) {
+		bnx2i_conn = bnx2i_ep->conn;
+		conn = bnx2i_conn->cls_conn->dd_data;
+		session = conn->session;
+
+		spin_lock_bh(&session->lock);
+		bnx2i_conn->is_bound = 0;
+		spin_unlock_bh(&session->lock);
+	}
+
+	hba = bnx2i_ep->hba;
+	if (bnx2i_ep->state == EP_STATE_IDLE)
+		goto return_bnx2i_ep;
+	cnic = hba->cnic;
+
+	mutex_lock(&hba->net_dev_lock);
+
+	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+		goto free_resc;
+	if (bnx2i_ep->hba_age != hba->age)
+		goto free_resc;
+
+	if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
+		goto destory_conn;
+
+	bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+	init_timer(&bnx2i_ep->ofld_timer);
+	bnx2i_ep->ofld_timer.expires = 10*HZ + jiffies;
+	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+	add_timer(&bnx2i_ep->ofld_timer);
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		int close = 0;
+
+		if (session) {
+			spin_lock_bh(&session->lock);
+			if (session->state == ISCSI_STATE_LOGGING_OUT)
+				close = 1;
+			spin_unlock_bh(&session->lock);
+		}
+		if (close)
+			cnic->cm_close(bnx2i_ep->cm_sk);
+		else
+			cnic->cm_abort(bnx2i_ep->cm_sk);
+	} else
+		goto free_resc;
+
+	/* wait for option-2 conn teardown */
+	wait_event_interruptible(bnx2i_ep->ofld_wait,
+				 bnx2i_ep->state != EP_STATE_DISCONN_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_ep->ofld_timer);
+
+destory_conn:
+	if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+		mutex_unlock(&hba->net_dev_lock);
+		return;
+	}
+free_resc:
+	mutex_unlock(&hba->net_dev_lock);
+	bnx2i_free_qp_resc(hba, bnx2i_ep);
+return_bnx2i_ep:
+	if (bnx2i_conn)
+		bnx2i_conn->ep = NULL;
+
+	bnx2i_free_ep(ep);
+
+	if (!hba->ofld_conns_active)
+		bnx2i_unreg_dev_all();
+}
+
+
+/**
+ * bnx2i_nl_set_path - ISCSI_UEVENT_PATH_UPDATE user message handler
+ * @buf:	pointer to buffer containing iscsi path message
+ *
+ */
+static int bnx2i_nl_set_path(struct Scsi_Host *shost, struct iscsi_path *params)
+{
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	char *buf = (char *) params;
+	u16 len = sizeof(*params);
+
+	/* handled by cnic driver */
+	hba->cnic->iscsi_nl_msg_recv(hba->cnic, ISCSI_UEVENT_PATH_UPDATE, buf,
+				     len);
+
+	return 0;
+}
+
+
+/*
+ * 'Scsi_Host_Template' structure and 'iscsi_tranport' structure template
+ * used while registering with the scsi host and iSCSI transport module.
+ */
+static struct scsi_host_template bnx2i_host_template = {
+	.module			= THIS_MODULE,
+	.name			= "Broadcom Offload iSCSI Initiator",
+	.proc_name		= "bnx2i",
+	.queuecommand		= iscsi_queuecommand,
+	.eh_abort_handler	= iscsi_eh_abort,
+	.eh_device_reset_handler = iscsi_eh_device_reset,
+	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.can_queue		= 1024,
+	.max_sectors		= 127,
+	.cmd_per_lun		= 32,
+	.this_id		= -1,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.sg_tablesize		= ISCSI_MAX_BDS_PER_CMD,
+	.shost_attrs		= bnx2i_dev_attributes,
+};
+
+struct iscsi_transport bnx2i_iscsi_transport = {
+	.owner			= THIS_MODULE,
+	.name			= "bnx2i",
+	.caps			= CAP_RECOVERY_L0 | CAP_HDRDGST |
+				  CAP_MULTI_R2T | CAP_DATADGST |
+				  CAP_DATA_PATH_OFFLOAD,
+	.param_mask		= ISCSI_MAX_RECV_DLENGTH |
+				  ISCSI_MAX_XMIT_DLENGTH |
+				  ISCSI_HDRDGST_EN |
+				  ISCSI_DATADGST_EN |
+				  ISCSI_INITIAL_R2T_EN |
+				  ISCSI_MAX_R2T |
+				  ISCSI_IMM_DATA_EN |
+				  ISCSI_FIRST_BURST |
+				  ISCSI_MAX_BURST |
+				  ISCSI_PDU_INORDER_EN |
+				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_ERL |
+				  ISCSI_CONN_PORT |
+				  ISCSI_CONN_ADDRESS |
+				  ISCSI_EXP_STATSN |
+				  ISCSI_PERSISTENT_PORT |
+				  ISCSI_PERSISTENT_ADDRESS |
+				  ISCSI_TARGET_NAME | ISCSI_TPGT |
+				  ISCSI_USERNAME | ISCSI_PASSWORD |
+				  ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+				  ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+				  ISCSI_LU_RESET_TMO |
+				  ISCSI_PING_TMO | ISCSI_RECV_TMO |
+				  ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+	.host_param_mask	= ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME,
+	.create_session		= bnx2i_session_create,
+	.destroy_session	= bnx2i_session_destroy,
+	.create_conn		= bnx2i_conn_create,
+	.bind_conn		= bnx2i_conn_bind,
+	.destroy_conn		= bnx2i_conn_destroy,
+	.set_param		= iscsi_set_param,
+	.get_conn_param		= bnx2i_conn_get_param,
+	.get_session_param	= iscsi_session_get_param,
+	.get_host_param		= bnx2i_host_get_param,
+	.start_conn		= bnx2i_conn_start,
+	.stop_conn		= iscsi_conn_stop,
+	.send_pdu		= iscsi_conn_send_pdu,
+	.xmit_task		= bnx2i_task_xmit,
+	.get_stats		= bnx2i_conn_get_stats,
+	/* TCP connect - disconnect - option-2 interface calls */
+	.ep_connect		= bnx2i_ep_connect,
+	.ep_poll		= bnx2i_ep_poll,
+	.ep_disconnect		= bnx2i_ep_disconnect,
+	.set_path		= bnx2i_nl_set_path,
+	/* Error recovery timeout call */
+	.session_recovery_timedout = iscsi_session_recovery_timedout,
+	.cleanup_task		= bnx2i_cleanup_task,
+};
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
new file mode 100644
index 00000000000..96426b751eb
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -0,0 +1,142 @@
+/* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2004 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+/**
+ * bnx2i_dev_to_hba - maps dev pointer to adapter struct
+ * @dev:	device pointer
+ *
+ * Map device to hba structure
+ */
+static inline struct bnx2i_hba *bnx2i_dev_to_hba(struct device *dev)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	return iscsi_host_priv(shost);
+}
+
+
+/**
+ * bnx2i_show_sq_info - return(s currently configured send queue (SQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ *
+ * Returns current SQ size parameter, this paramater determines the number
+ * outstanding iSCSI commands supported on a connection
+ */
+static ssize_t bnx2i_show_sq_info(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	return sprintf(buf, "0x%x\n", hba->max_sqes);
+}
+
+
+/**
+ * bnx2i_set_sq_info - update send queue (SQ) size parameter
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ * @count:	parameter buffer size
+ *
+ * Interface for user to change shared queue size allocated for each conn
+ * Must be within SQ limits and a power of 2. For the latter this is needed
+ * because of how libiscsi preallocates tasks.
+ */
+static ssize_t bnx2i_set_sq_info(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+	u32 val;
+	int max_sq_size;
+
+	if (hba->ofld_conns_active)
+		goto skip_config;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		max_sq_size = BNX2I_5770X_SQ_WQES_MAX;
+	else
+		max_sq_size = BNX2I_570X_SQ_WQES_MAX;
+
+	if (sscanf(buf, " 0x%x ", &val) > 0) {
+		if ((val >= BNX2I_SQ_WQES_MIN) && (val <= max_sq_size) &&
+		    (is_power_of_2(val)))
+			hba->max_sqes = val;
+	}
+
+	return count;
+
+skip_config:
+	printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n");
+	return 0;
+}
+
+
+/**
+ * bnx2i_show_ccell_info - returns command cell (HQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ *
+ * returns per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_show_ccell_info(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	return sprintf(buf, "0x%x\n", hba->num_ccell);
+}
+
+
+/**
+ * bnx2i_get_link_state - set command cell (HQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ * @count:	parameter buffer size
+ *
+ * updates per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_set_ccell_info(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	u32 val;
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	if (hba->ofld_conns_active)
+		goto skip_config;
+
+	if (sscanf(buf, " 0x%x ", &val) > 0) {
+		if ((val >= BNX2I_CCELLS_MIN) &&
+		    (val <= BNX2I_CCELLS_MAX)) {
+			hba->num_ccell = val;
+		}
+	}
+
+	return count;
+
+skip_config:
+	printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n");
+	return 0;
+}
+
+
+static DEVICE_ATTR(sq_size, S_IRUGO | S_IWUSR,
+		   bnx2i_show_sq_info, bnx2i_set_sq_info);
+static DEVICE_ATTR(num_ccell, S_IRUGO | S_IWUSR,
+		   bnx2i_show_ccell_info, bnx2i_set_ccell_info);
+
+struct device_attribute *bnx2i_dev_attributes[] = {
+	&dev_attr_sq_size,
+	&dev_attr_num_ccell,
+	NULL
+};
diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index 59b0958d2d1..e3133b58e59 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -144,7 +144,6 @@ struct cxgb3i_adapter *cxgb3i_adapter_find_by_tdev(struct t3cdev *);
 void cxgb3i_adapter_open(struct t3cdev *);
 void cxgb3i_adapter_close(struct t3cdev *);
 
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *);
 struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *,
 				       struct net_device *);
 void cxgb3i_hba_host_remove(struct cxgb3i_hba *);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 9212400b9b1..74369a3f963 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
 
 #include <linux/inet.h>
 #include <linux/crypto.h>
+#include <net/dst.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -178,7 +179,7 @@ void cxgb3i_adapter_close(struct t3cdev *t3dev)
  * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure via net_device
  * @t3dev: t3cdev adapter
  */
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
+static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
 {
 	struct cxgb3i_adapter *snic;
 	int i;
@@ -261,20 +262,27 @@ void cxgb3i_hba_host_remove(struct cxgb3i_hba *hba)
 
 /**
  * cxgb3i_ep_connect - establish TCP connection to target portal
+ * @shost:		scsi host to use
  * @dst_addr:		target IP address
  * @non_blocking:	blocking or non-blocking call
  *
  * Initiates a TCP/IP connection to the dst_addr
  */
-static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr,
+static struct iscsi_endpoint *cxgb3i_ep_connect(struct Scsi_Host *shost,
+						struct sockaddr *dst_addr,
 						int non_blocking)
 {
 	struct iscsi_endpoint *ep;
 	struct cxgb3i_endpoint *cep;
-	struct cxgb3i_hba *hba;
+	struct cxgb3i_hba *hba = NULL;
 	struct s3_conn *c3cn = NULL;
 	int err = 0;
 
+	if (shost)
+		hba = iscsi_host_priv(shost);
+
+	cxgb3i_api_debug("shost 0x%p, hba 0x%p.\n", shost, hba);
+
 	c3cn = cxgb3i_c3cn_create();
 	if (!c3cn) {
 		cxgb3i_log_info("ep connect OOM.\n");
@@ -282,17 +290,27 @@ static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr,
 		goto release_conn;
 	}
 
-	err = cxgb3i_c3cn_connect(c3cn, (struct sockaddr_in *)dst_addr);
+	err = cxgb3i_c3cn_connect(hba ? hba->ndev : NULL, c3cn,
+				 (struct sockaddr_in *)dst_addr);
 	if (err < 0) {
 		cxgb3i_log_info("ep connect failed.\n");
 		goto release_conn;
 	}
+
 	hba = cxgb3i_hba_find_by_netdev(c3cn->dst_cache->dev);
 	if (!hba) {
 		err = -ENOSPC;
 		cxgb3i_log_info("NOT going through cxgbi device.\n");
 		goto release_conn;
 	}
+
+	if (shost && hba != iscsi_host_priv(shost)) {
+		err = -ENOSPC;
+		cxgb3i_log_info("Could not connect through request host%u\n",
+				shost->host_no);
+		goto release_conn;
+	}
+
 	if (c3cn_is_closing(c3cn)) {
 		err = -ENOSPC;
 		cxgb3i_log_info("ep connect unable to connect.\n");
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index e11c9c180f3..c1d5be4adf9 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1479,12 +1479,13 @@ static struct net_device *cxgb3_egress_dev(struct net_device *root_dev,
 	return NULL;
 }
 
-static struct rtable *find_route(__be32 saddr, __be32 daddr,
+static struct rtable *find_route(struct net_device *dev,
+				 __be32 saddr, __be32 daddr,
 				 __be16 sport, __be16 dport)
 {
 	struct rtable *rt;
 	struct flowi fl = {
-		.oif = 0,
+		.oif = dev ? dev->ifindex : 0,
 		.nl_u = {
 			 .ip4_u = {
 				   .daddr = daddr,
@@ -1573,36 +1574,40 @@ out_err:
  *
  * return 0 if active open request is sent, < 0 otherwise.
  */
-int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin)
+int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn,
+			struct sockaddr_in *usin)
 {
 	struct rtable *rt;
-	struct net_device *dev;
 	struct cxgb3i_sdev_data *cdata;
 	struct t3cdev *cdev;
 	__be32 sipv4;
 	int err;
 
+	c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
+
 	if (usin->sin_family != AF_INET)
 		return -EAFNOSUPPORT;
 
 	c3cn->daddr.sin_port = usin->sin_port;
 	c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
 
-	rt = find_route(c3cn->saddr.sin_addr.s_addr,
+	rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
 			c3cn->daddr.sin_addr.s_addr,
 			c3cn->saddr.sin_port,
 			c3cn->daddr.sin_port);
 	if (rt == NULL) {
-		c3cn_conn_debug("NO route to 0x%x, port %u.\n",
+		c3cn_conn_debug("NO route to 0x%x, port %u, dev %s.\n",
 				c3cn->daddr.sin_addr.s_addr,
-				ntohs(c3cn->daddr.sin_port));
+				ntohs(c3cn->daddr.sin_port),
+				dev ? dev->name : "any");
 		return -ENETUNREACH;
 	}
 
 	if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) {
-		c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n",
+		c3cn_conn_debug("multi-cast route to 0x%x, port %u, dev %s.\n",
 				c3cn->daddr.sin_addr.s_addr,
-				ntohs(c3cn->daddr.sin_port));
+				ntohs(c3cn->daddr.sin_port),
+				dev ? dev->name : "any");
 		ip_rt_put(rt);
 		return -ENETUNREACH;
 	}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h
index ebfca960c0a..6a1d86b1faf 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h
@@ -169,7 +169,8 @@ void cxgb3i_sdev_add(struct t3cdev *, struct cxgb3_client *);
 void cxgb3i_sdev_remove(struct t3cdev *);
 
 struct s3_conn *cxgb3i_c3cn_create(void);
-int cxgb3i_c3cn_connect(struct s3_conn *, struct sockaddr_in *);
+int cxgb3i_c3cn_connect(struct net_device *, struct s3_conn *,
+			struct sockaddr_in *);
 void cxgb3i_c3cn_rx_credits(struct s3_conn *, int);
 int cxgb3i_c3cn_send_pdus(struct s3_conn *, struct sk_buff *);
 void cxgb3i_c3cn_release(struct s3_conn *);
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 43b8c51e98d..fd0544f7da8 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -561,6 +561,12 @@ static int rdac_check_sense(struct scsi_device *sdev,
 	struct rdac_dh_data *h = get_rdac_data(sdev);
 	switch (sense_hdr->sense_key) {
 	case NOT_READY:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
+			/* LUN Not Ready - Logical Unit Not Ready and is in
+			* the process of becoming ready
+			* Just retry.
+			*/
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
 			/* LUN Not Ready - Storage firmware incompatible
 			 * Manual code synchonisation required.
diff --git a/drivers/scsi/dpt/osd_util.h b/drivers/scsi/dpt/osd_util.h
index 4b56c0436ba..b2613c2eaac 100644
--- a/drivers/scsi/dpt/osd_util.h
+++ b/drivers/scsi/dpt/osd_util.h
@@ -342,7 +342,7 @@ uLONG osdGetThreadID(void);
 /* wakes up the specifed thread */
 void osdWakeThread(uLONG);
 
-/* osd sleep for x miliseconds */
+/* osd sleep for x milliseconds */
 void osdSleep(uLONG);
 
 #define DPT_THREAD_PRIORITY_LOWEST 0x00
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 03e1926f40b..c15878e8815 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -54,7 +54,6 @@ MODULE_LICENSE("GPL v2");
 /* fcoe host list */
 LIST_HEAD(fcoe_hostlist);
 DEFINE_RWLOCK(fcoe_hostlist_lock);
-DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
 DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
 
 /* Function Prototypes */
@@ -71,7 +70,7 @@ static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
 static int fcoe_hostlist_add(const struct fc_lport *);
 static int fcoe_hostlist_remove(const struct fc_lport *);
 
-static int fcoe_check_wait_queue(struct fc_lport *);
+static void fcoe_check_wait_queue(struct fc_lport *, struct sk_buff *);
 static int fcoe_device_notification(struct notifier_block *, ulong, void *);
 static void fcoe_dev_setup(void);
 static void fcoe_dev_cleanup(void);
@@ -136,6 +135,58 @@ static struct scsi_host_template fcoe_shost_template = {
 };
 
 /**
+ * fcoe_fip_recv - handle a received FIP frame.
+ * @skb: the receive skb
+ * @dev: associated &net_device
+ * @ptype: the &packet_type structure which was used to register this handler.
+ * @orig_dev: original receive &net_device, in case @dev is a bond.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
+			 struct packet_type *ptype,
+			 struct net_device *orig_dev)
+{
+	struct fcoe_softc *fc;
+
+	fc = container_of(ptype, struct fcoe_softc, fip_packet_type);
+	fcoe_ctlr_recv(&fc->ctlr, skb);
+	return 0;
+}
+
+/**
+ * fcoe_fip_send() - send an Ethernet-encapsulated FIP frame.
+ * @fip: FCoE controller.
+ * @skb: FIP Packet.
+ */
+static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
+{
+	skb->dev = fcoe_from_ctlr(fip)->real_dev;
+	dev_queue_xmit(skb);
+}
+
+/**
+ * fcoe_update_src_mac() - Update Ethernet MAC filters.
+ * @fip: FCoE controller.
+ * @old: Unicast MAC address to delete if the MAC is non-zero.
+ * @new: Unicast MAC address to add.
+ *
+ * Remove any previously-set unicast MAC filter.
+ * Add secondary FCoE MAC address filter for our OUI.
+ */
+static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new)
+{
+	struct fcoe_softc *fc;
+
+	fc = fcoe_from_ctlr(fip);
+	rtnl_lock();
+	if (!is_zero_ether_addr(old))
+		dev_unicast_delete(fc->real_dev, old);
+	dev_unicast_add(fc->real_dev, new);
+	rtnl_unlock();
+}
+
+/**
  * fcoe_lport_config() - sets up the fc_lport
  * @lp: ptr to the fc_lport
  *
@@ -146,6 +197,7 @@ static int fcoe_lport_config(struct fc_lport *lp)
 	lp->link_up = 0;
 	lp->qfull = 0;
 	lp->max_retry_count = 3;
+	lp->max_rport_retry_count = 3;
 	lp->e_d_tov = 2 * 1000;	/* FC-FS default */
 	lp->r_a_tov = 2 * 2 * 1000;
 	lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
@@ -167,6 +219,42 @@ static int fcoe_lport_config(struct fc_lport *lp)
 }
 
 /**
+ * fcoe_netdev_cleanup() - clean up netdev configurations
+ * @fc: ptr to the fcoe_softc
+ */
+void fcoe_netdev_cleanup(struct fcoe_softc *fc)
+{
+	u8 flogi_maddr[ETH_ALEN];
+
+	/* Don't listen for Ethernet packets anymore */
+	dev_remove_pack(&fc->fcoe_packet_type);
+	dev_remove_pack(&fc->fip_packet_type);
+
+	/* Delete secondary MAC addresses */
+	rtnl_lock();
+	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
+	dev_unicast_delete(fc->real_dev, flogi_maddr);
+	if (!is_zero_ether_addr(fc->ctlr.data_src_addr))
+		dev_unicast_delete(fc->real_dev, fc->ctlr.data_src_addr);
+	if (fc->ctlr.spma)
+		dev_unicast_delete(fc->real_dev, fc->ctlr.ctl_src_addr);
+	dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
+	rtnl_unlock();
+}
+
+/**
+ * fcoe_queue_timer() - fcoe queue timer
+ * @lp: the fc_lport pointer
+ *
+ * Calls fcoe_check_wait_queue on timeout
+ *
+ */
+static void fcoe_queue_timer(ulong lp)
+{
+	fcoe_check_wait_queue((struct fc_lport *)lp, NULL);
+}
+
+/**
  * fcoe_netdev_config() - Set up netdev for SW FCoE
  * @lp : ptr to the fc_lport
  * @netdev : ptr to the associated netdevice struct
@@ -181,6 +269,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	u64 wwnn, wwpn;
 	struct fcoe_softc *fc;
 	u8 flogi_maddr[ETH_ALEN];
+	struct netdev_hw_addr *ha;
 
 	/* Setup lport private data to point to fcoe softc */
 	fc = lport_priv(lp);
@@ -236,10 +325,25 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	}
 	skb_queue_head_init(&fc->fcoe_pending_queue);
 	fc->fcoe_pending_queue_active = 0;
+	setup_timer(&fc->timer, fcoe_queue_timer, (unsigned long)lp);
+
+	/* look for SAN MAC address, if multiple SAN MACs exist, only
+	 * use the first one for SPMA */
+	rcu_read_lock();
+	for_each_dev_addr(netdev, ha) {
+		if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
+		    (is_valid_ether_addr(fc->ctlr.ctl_src_addr))) {
+			memcpy(fc->ctlr.ctl_src_addr, ha->addr, ETH_ALEN);
+			fc->ctlr.spma = 1;
+			break;
+		}
+	}
+	rcu_read_unlock();
 
 	/* setup Source Mac Address */
-	memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
-	       fc->real_dev->addr_len);
+	if (!fc->ctlr.spma)
+		memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
+		       fc->real_dev->addr_len);
 
 	wwnn = fcoe_wwn_from_mac(fc->real_dev->dev_addr, 1, 0);
 	fc_set_wwnn(lp, wwnn);
@@ -254,7 +358,9 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	 */
 	rtnl_lock();
 	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
-	dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+	dev_unicast_add(fc->real_dev, flogi_maddr);
+	if (fc->ctlr.spma)
+		dev_unicast_add(fc->real_dev, fc->ctlr.ctl_src_addr);
 	dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
 	rtnl_unlock();
 
@@ -267,6 +373,11 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	fc->fcoe_packet_type.dev = fc->real_dev;
 	dev_add_pack(&fc->fcoe_packet_type);
 
+	fc->fip_packet_type.func = fcoe_fip_recv;
+	fc->fip_packet_type.type = htons(ETH_P_FIP);
+	fc->fip_packet_type.dev = fc->real_dev;
+	dev_add_pack(&fc->fip_packet_type);
+
 	return 0;
 }
 
@@ -334,7 +445,6 @@ static int fcoe_if_destroy(struct net_device *netdev)
 {
 	struct fc_lport *lp = NULL;
 	struct fcoe_softc *fc;
-	u8 flogi_maddr[ETH_ALEN];
 
 	BUG_ON(!netdev);
 
@@ -353,9 +463,10 @@ static int fcoe_if_destroy(struct net_device *netdev)
 	/* Remove the instance from fcoe's list */
 	fcoe_hostlist_remove(lp);
 
-	/* Don't listen for Ethernet packets anymore */
-	dev_remove_pack(&fc->fcoe_packet_type);
-	dev_remove_pack(&fc->fip_packet_type);
+	/* clean up netdev configurations */
+	fcoe_netdev_cleanup(fc);
+
+	/* tear-down the FCoE controller */
 	fcoe_ctlr_destroy(&fc->ctlr);
 
 	/* Cleanup the fc_lport */
@@ -370,22 +481,15 @@ static int fcoe_if_destroy(struct net_device *netdev)
 	if (lp->emp)
 		fc_exch_mgr_free(lp->emp);
 
-	/* Delete secondary MAC addresses */
-	rtnl_lock();
-	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
-	dev_unicast_delete(fc->real_dev, flogi_maddr, ETH_ALEN);
-	if (!is_zero_ether_addr(fc->ctlr.data_src_addr))
-		dev_unicast_delete(fc->real_dev,
-				   fc->ctlr.data_src_addr, ETH_ALEN);
-	dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
-	rtnl_unlock();
-
 	/* Free the per-CPU receive threads */
 	fcoe_percpu_clean(lp);
 
 	/* Free existing skbs */
 	fcoe_clean_pending_queue(lp);
 
+	/* Stop the timer */
+	del_timer_sync(&fc->timer);
+
 	/* Free memory used by statistical counters */
 	fc_lport_free_stats(lp);
 
@@ -439,58 +543,6 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = {
 };
 
 /**
- * fcoe_fip_recv - handle a received FIP frame.
- * @skb: the receive skb
- * @dev: associated &net_device
- * @ptype: the &packet_type structure which was used to register this handler.
- * @orig_dev: original receive &net_device, in case @dev is a bond.
- *
- * Returns: 0 for success
- */
-static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
-			 struct packet_type *ptype,
-			 struct net_device *orig_dev)
-{
-	struct fcoe_softc *fc;
-
-	fc = container_of(ptype, struct fcoe_softc, fip_packet_type);
-	fcoe_ctlr_recv(&fc->ctlr, skb);
-	return 0;
-}
-
-/**
- * fcoe_fip_send() - send an Ethernet-encapsulated FIP frame.
- * @fip: FCoE controller.
- * @skb: FIP Packet.
- */
-static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
-{
-	skb->dev = fcoe_from_ctlr(fip)->real_dev;
-	dev_queue_xmit(skb);
-}
-
-/**
- * fcoe_update_src_mac() - Update Ethernet MAC filters.
- * @fip: FCoE controller.
- * @old: Unicast MAC address to delete if the MAC is non-zero.
- * @new: Unicast MAC address to add.
- *
- * Remove any previously-set unicast MAC filter.
- * Add secondary FCoE MAC address filter for our OUI.
- */
-static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new)
-{
-	struct fcoe_softc *fc;
-
-	fc = fcoe_from_ctlr(fip);
-	rtnl_lock();
-	if (!is_zero_ether_addr(old))
-		dev_unicast_delete(fc->real_dev, old, ETH_ALEN);
-	dev_unicast_add(fc->real_dev, new, ETH_ALEN);
-	rtnl_unlock();
-}
-
-/**
  * fcoe_if_create() - this function creates the fcoe interface
  * @netdev: pointer the associated netdevice
  *
@@ -531,13 +583,6 @@ static int fcoe_if_create(struct net_device *netdev)
 		goto out_host_put;
 	}
 
-	/* configure lport network properties */
-	rc = fcoe_netdev_config(lp, netdev);
-	if (rc) {
-		FC_DBG("Could not configure netdev for lport\n");
-		goto out_host_put;
-	}
-
 	/*
 	 * Initialize FIP.
 	 */
@@ -545,23 +590,25 @@ static int fcoe_if_create(struct net_device *netdev)
 	fc->ctlr.send = fcoe_fip_send;
 	fc->ctlr.update_mac = fcoe_update_src_mac;
 
-	fc->fip_packet_type.func = fcoe_fip_recv;
-	fc->fip_packet_type.type = htons(ETH_P_FIP);
-	fc->fip_packet_type.dev = fc->real_dev;
-	dev_add_pack(&fc->fip_packet_type);
+	/* configure lport network properties */
+	rc = fcoe_netdev_config(lp, netdev);
+	if (rc) {
+		FC_DBG("Could not configure netdev for the interface\n");
+		goto out_netdev_cleanup;
+	}
 
 	/* configure lport scsi host properties */
 	rc = fcoe_shost_config(lp, shost, &netdev->dev);
 	if (rc) {
 		FC_DBG("Could not configure shost for lport\n");
-		goto out_host_put;
+		goto out_netdev_cleanup;
 	}
 
 	/* lport exch manager allocation */
 	rc = fcoe_em_config(lp);
 	if (rc) {
 		FC_DBG("Could not configure em for lport\n");
-		goto out_host_put;
+		goto out_netdev_cleanup;
 	}
 
 	/* Initialize the library */
@@ -587,6 +634,8 @@ static int fcoe_if_create(struct net_device *netdev)
 
 out_lp_destroy:
 	fc_exch_mgr_free(lp->emp); /* Free the EM */
+out_netdev_cleanup:
+	fcoe_netdev_cleanup(fc);
 out_host_put:
 	scsi_host_put(lp->host);
 	return rc;
@@ -988,7 +1037,7 @@ u32 fcoe_fc_crc(struct fc_frame *fp)
  */
 int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 {
-	int wlen, rc = 0;
+	int wlen;
 	u32 crc;
 	struct ethhdr *eh;
 	struct fcoe_crc_eof *cp;
@@ -1021,8 +1070,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 	sof = fr_sof(fp);
 	eof = fr_eof(fp);
 
-	elen = (fc->real_dev->priv_flags & IFF_802_1Q_VLAN) ?
-		sizeof(struct vlan_ethhdr) : sizeof(struct ethhdr);
+	elen = sizeof(struct ethhdr);
 	hlen = sizeof(struct fcoe_hdr);
 	tlen = sizeof(struct fcoe_crc_eof);
 	wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE;
@@ -1107,18 +1155,9 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 	/* send down to lld */
 	fr_dev(fp) = lp;
 	if (fc->fcoe_pending_queue.qlen)
-		rc = fcoe_check_wait_queue(lp);
-
-	if (rc == 0)
-		rc = fcoe_start_io(skb);
-
-	if (rc) {
-		spin_lock_bh(&fc->fcoe_pending_queue.lock);
-		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
-		spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-		if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-			lp->qfull = 1;
-	}
+		fcoe_check_wait_queue(lp, skb);
+	else if (fcoe_start_io(skb))
+		fcoe_check_wait_queue(lp, skb);
 
 	return 0;
 }
@@ -1268,32 +1307,6 @@ int fcoe_percpu_receive_thread(void *arg)
 }
 
 /**
- * fcoe_watchdog() - fcoe timer callback
- * @vp:
- *
- * This checks the pending queue length for fcoe and set lport qfull
- * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
- * fcoe_hostlist.
- *
- * Returns: 0 for success
- */
-void fcoe_watchdog(ulong vp)
-{
-	struct fcoe_softc *fc;
-
-	read_lock(&fcoe_hostlist_lock);
-	list_for_each_entry(fc, &fcoe_hostlist, list) {
-		if (fc->ctlr.lp)
-			fcoe_check_wait_queue(fc->ctlr.lp);
-	}
-	read_unlock(&fcoe_hostlist_lock);
-
-	fcoe_timer.expires = jiffies + (1 * HZ);
-	add_timer(&fcoe_timer);
-}
-
-
-/**
  * fcoe_check_wait_queue() - attempt to clear the transmit backlog
  * @lp: the fc_lport
  *
@@ -1305,16 +1318,17 @@ void fcoe_watchdog(ulong vp)
  * The wait_queue is used when the skb transmit fails. skb will go
  * in the wait_queue which will be emptied by the timer function or
  * by the next skb transmit.
- *
- * Returns: 0 for success
  */
-static int fcoe_check_wait_queue(struct fc_lport *lp)
+static void fcoe_check_wait_queue(struct fc_lport *lp, struct sk_buff *skb)
 {
 	struct fcoe_softc *fc = lport_priv(lp);
-	struct sk_buff *skb;
-	int rc = -1;
+	int rc;
 
 	spin_lock_bh(&fc->fcoe_pending_queue.lock);
+
+	if (skb)
+		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
+
 	if (fc->fcoe_pending_queue_active)
 		goto out;
 	fc->fcoe_pending_queue_active = 1;
@@ -1340,23 +1354,26 @@ static int fcoe_check_wait_queue(struct fc_lport *lp)
 
 	if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
 		lp->qfull = 0;
+	if (fc->fcoe_pending_queue.qlen && !timer_pending(&fc->timer))
+		mod_timer(&fc->timer, jiffies + 2);
 	fc->fcoe_pending_queue_active = 0;
-	rc = fc->fcoe_pending_queue.qlen;
 out:
+	if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
+		lp->qfull = 1;
 	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-	return rc;
+	return;
 }
 
 /**
  * fcoe_dev_setup() - setup link change notification interface
  */
-static void fcoe_dev_setup()
+static void fcoe_dev_setup(void)
 {
 	register_netdevice_notifier(&fcoe_notifier);
 }
 
 /**
- * fcoe_dev_setup() - cleanup link change notification interface
+ * fcoe_dev_cleanup() - cleanup link change notification interface
  */
 static void fcoe_dev_cleanup(void)
 {
@@ -1815,10 +1832,6 @@ static int __init fcoe_init(void)
 	/* Setup link change notification */
 	fcoe_dev_setup();
 
-	setup_timer(&fcoe_timer, fcoe_watchdog, 0);
-
-	mod_timer(&fcoe_timer, jiffies + (10 * HZ));
-
 	fcoe_if_init();
 
 	return 0;
@@ -1844,9 +1857,6 @@ static void __exit fcoe_exit(void)
 
 	fcoe_dev_cleanup();
 
-	/* Stop the timer */
-	del_timer_sync(&fcoe_timer);
-
 	/* releases the associated fcoe hosts */
 	list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
 		fcoe_if_destroy(fc->real_dev);
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index 917aae88689..a1eb8c1988b 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -61,6 +61,7 @@ struct fcoe_softc {
 	struct packet_type  fip_packet_type;
 	struct sk_buff_head fcoe_pending_queue;
 	u8	fcoe_pending_queue_active;
+	struct timer_list timer;		/* queue timer */
 	struct fcoe_ctlr ctlr;
 };
 
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 62ba0f39c6b..2f5bc7fd3fa 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -198,6 +198,8 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
 	sol->fip.fip_subcode = FIP_SC_SOL;
 	sol->fip.fip_dl_len = htons(sizeof(sol->desc) / FIP_BPW);
 	sol->fip.fip_flags = htons(FIP_FL_FPMA);
+	if (fip->spma)
+		sol->fip.fip_flags |= htons(FIP_FL_SPMA);
 
 	sol->desc.mac.fd_desc.fip_dtype = FIP_DT_MAC;
 	sol->desc.mac.fd_desc.fip_dlen = sizeof(sol->desc.mac) / FIP_BPW;
@@ -213,7 +215,7 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
 	sol->desc.size.fd_size = htons(fcoe_size);
 
 	skb_put(skb, sizeof(*sol));
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -350,6 +352,8 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, int ports, u8 *sa)
 	kal->fip.fip_dl_len = htons((sizeof(kal->mac) +
 				    ports * sizeof(*vn)) / FIP_BPW);
 	kal->fip.fip_flags = htons(FIP_FL_FPMA);
+	if (fip->spma)
+		kal->fip.fip_flags |= htons(FIP_FL_SPMA);
 
 	kal->mac.fd_desc.fip_dtype = FIP_DT_MAC;
 	kal->mac.fd_desc.fip_dlen = sizeof(kal->mac) / FIP_BPW;
@@ -365,7 +369,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, int ports, u8 *sa)
 	}
 
 	skb_put(skb, len);
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -413,6 +417,8 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip,
 	cap->fip.fip_subcode = FIP_SC_REQ;
 	cap->fip.fip_dl_len = htons((dlen + sizeof(*mac)) / FIP_BPW);
 	cap->fip.fip_flags = htons(FIP_FL_FPMA);
+	if (fip->spma)
+		cap->fip.fip_flags |= htons(FIP_FL_SPMA);
 
 	cap->encaps.fd_desc.fip_dtype = dtype;
 	cap->encaps.fd_desc.fip_dlen = dlen / FIP_BPW;
@@ -421,10 +427,12 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip,
 	memset(mac, 0, sizeof(mac));
 	mac->fd_desc.fip_dtype = FIP_DT_MAC;
 	mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
-	if (dtype != ELS_FLOGI)
+	if (dtype != FIP_DT_FLOGI)
 		memcpy(mac->fd_mac, fip->data_src_addr, ETH_ALEN);
+	else if (fip->spma)
+		memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
 
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	return 0;
@@ -447,14 +455,10 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	u16 old_xid;
 	u8 op;
 
-	if (fip->state == FIP_ST_NON_FIP)
-		return 0;
-
 	fh = (struct fc_frame_header *)skb->data;
 	op = *(u8 *)(fh + 1);
 
-	switch (op) {
-	case ELS_FLOGI:
+	if (op == ELS_FLOGI) {
 		old_xid = fip->flogi_oxid;
 		fip->flogi_oxid = ntohs(fh->fh_ox_id);
 		if (fip->state == FIP_ST_AUTO) {
@@ -466,6 +470,15 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 			fip->map_dest = 1;
 			return 0;
 		}
+		if (fip->state == FIP_ST_NON_FIP)
+			fip->map_dest = 1;
+	}
+
+	if (fip->state == FIP_ST_NON_FIP)
+		return 0;
+
+	switch (op) {
+	case ELS_FLOGI:
 		op = FIP_DT_FLOGI;
 		break;
 	case ELS_FDISC:
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 32ef6b87d89..a84072865fc 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -680,6 +680,7 @@ static int __devinit fnic_probe(struct pci_dev *pdev,
 	}
 
 	lp->max_retry_count = fnic->config.flogi_retries;
+	lp->max_rport_retry_count = fnic->config.plogi_retries;
 	lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
 			      FCP_SPPF_CONF_COMPL);
 	if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 59349a316e1..1258da34fbc 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -152,6 +152,7 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
                          struct Scsi_Host *host, gdth_ha_str *ha)
 {
     int size = 0,len = 0;
+    int hlen;
     off_t begin = 0,pos = 0;
     int id, i, j, k, sec, flag;
     int no_mdrv = 0, drv_no, is_mirr;
@@ -192,11 +193,11 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
     if (reserve_list[0] == 0xff)
         strcpy(hrec, "--");
     else {
-        sprintf(hrec, "%d", reserve_list[0]);
+        hlen = sprintf(hrec, "%d", reserve_list[0]);
         for (i = 1;  i < MAX_RES_ARGS; i++) {
             if (reserve_list[i] == 0xff) 
                 break;
-            sprintf(hrec,"%s,%d", hrec, reserve_list[i]);
+            hlen += snprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
         }
     }
     size = sprintf(buffer+len,
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ea4abee7a2a..b4b805e8d7d 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -110,7 +110,7 @@ static const struct {
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_DEAD, DID_ERROR, 0, 1, "transport dead" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_CONFIG_ERROR, DID_ERROR, 1, 1, "configuration error" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_NAME_SERVER_FAIL, DID_ERROR, 1, 1, "name server failure" },
-	{ IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 0, 0, "link halted" },
+	{ IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 1, 0, "link halted" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_GENERAL, DID_OK, 1, 0, "general transport error" },
 
 	{ IBMVFC_VIOS_FAILURE, IBMVFC_CRQ_FAILURE, DID_REQUEUE, 1, 1, "CRQ failure" },
@@ -143,6 +143,7 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *);
 static void ibmvfc_tgt_send_prli(struct ibmvfc_target *);
 static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *);
 static void ibmvfc_tgt_query_target(struct ibmvfc_target *);
+static void ibmvfc_npiv_logout(struct ibmvfc_host *);
 
 static const char *unknown_error = "unknown error";
 
@@ -275,7 +276,7 @@ static int ibmvfc_get_err_result(struct ibmvfc_cmd *vfc_cmd)
 	int fc_rsp_len = rsp->fcp_rsp_len;
 
 	if ((rsp->flags & FCP_RSP_LEN_VALID) &&
-	    ((!fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
+	    ((fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
 	     rsp->data.info.rsp_code))
 		return DID_ERROR << 16;
 
@@ -431,6 +432,8 @@ static void ibmvfc_set_tgt_action(struct ibmvfc_target *tgt,
 	case IBMVFC_TGT_ACTION_DEL_RPORT:
 		break;
 	default:
+		if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
+			tgt->add_rport = 0;
 		tgt->action = action;
 		break;
 	}
@@ -475,6 +478,10 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 		if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT)
 			vhost->action = action;
 		break;
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
+		if (vhost->action == IBMVFC_HOST_ACTION_LOGO)
+			vhost->action = action;
+		break;
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
 		if (vhost->action == IBMVFC_HOST_ACTION_INIT)
 			vhost->action = action;
@@ -483,7 +490,7 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 		switch (vhost->action) {
 		case IBMVFC_HOST_ACTION_INIT_WAIT:
 		case IBMVFC_HOST_ACTION_NONE:
-		case IBMVFC_HOST_ACTION_TGT_ADD:
+		case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 			vhost->action = action;
 			break;
 		default:
@@ -494,11 +501,11 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 		if (vhost->action == IBMVFC_HOST_ACTION_ALLOC_TGTS)
 			vhost->action = action;
 		break;
+	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_QUERY_TGTS:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
-	case IBMVFC_HOST_ACTION_TGT_ADD:
 	case IBMVFC_HOST_ACTION_NONE:
 	default:
 		vhost->action = action;
@@ -576,7 +583,7 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
 		}
 
 		list_for_each_entry(tgt, &vhost->targets, queue)
-			tgt->need_login = 1;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		scsi_block_requests(vhost->host);
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
 		vhost->job_step = ibmvfc_npiv_login;
@@ -646,6 +653,7 @@ static void ibmvfc_release_crq_queue(struct ibmvfc_host *vhost)
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 
 	vhost->state = IBMVFC_NO_CRQ;
+	vhost->logged_in = 0;
 	dma_unmap_single(vhost->dev, crq->msg_token, PAGE_SIZE, DMA_BIDIRECTIONAL);
 	free_page((unsigned long)crq->msgs);
 }
@@ -692,6 +700,7 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 
 	vhost->state = IBMVFC_NO_CRQ;
+	vhost->logged_in = 0;
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
 
 	/* Clean out the queue */
@@ -807,10 +816,10 @@ static void ibmvfc_purge_requests(struct ibmvfc_host *vhost, int error_code)
 }
 
 /**
- * __ibmvfc_reset_host - Reset the connection to the server (no locking)
+ * ibmvfc_hard_reset_host - Reset the connection to the server by breaking the CRQ
  * @vhost:	struct ibmvfc host to reset
  **/
-static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+static void ibmvfc_hard_reset_host(struct ibmvfc_host *vhost)
 {
 	int rc;
 
@@ -826,9 +835,25 @@ static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
 }
 
 /**
- * ibmvfc_reset_host - Reset the connection to the server
+ * __ibmvfc_reset_host - Reset the connection to the server (no locking)
  * @vhost:	struct ibmvfc host to reset
  **/
+static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+{
+	if (vhost->logged_in && vhost->action != IBMVFC_HOST_ACTION_LOGO_WAIT &&
+	    !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+		scsi_block_requests(vhost->host);
+		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO);
+		vhost->job_step = ibmvfc_npiv_logout;
+		wake_up(&vhost->work_wait_q);
+	} else
+		ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_reset_host - Reset the connection to the server
+ * @vhost:	ibmvfc host struct
+ **/
 static void ibmvfc_reset_host(struct ibmvfc_host *vhost)
 {
 	unsigned long flags;
@@ -842,9 +867,13 @@ static void ibmvfc_reset_host(struct ibmvfc_host *vhost)
  * ibmvfc_retry_host_init - Retry host initialization if allowed
  * @vhost:	ibmvfc host struct
  *
+ * Returns: 1 if init will be retried / 0 if not
+ *
  **/
-static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
+static int ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 {
+	int retry = 0;
+
 	if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT) {
 		vhost->delay_init = 1;
 		if (++vhost->init_retries > IBMVFC_MAX_HOST_INIT_RETRIES) {
@@ -853,11 +882,14 @@ static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 			ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
 		} else if (vhost->init_retries == IBMVFC_MAX_HOST_INIT_RETRIES)
 			__ibmvfc_reset_host(vhost);
-		else
+		else {
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
+			retry = 1;
+		}
 	}
 
 	wake_up(&vhost->work_wait_q);
+	return retry;
 }
 
 /**
@@ -1137,8 +1169,9 @@ static void ibmvfc_set_login_info(struct ibmvfc_host *vhost)
 	login_info->partition_num = vhost->partition_number;
 	login_info->vfc_frame_version = 1;
 	login_info->fcp_version = 3;
+	login_info->flags = IBMVFC_FLUSH_ON_HALT;
 	if (vhost->client_migrated)
-		login_info->flags = IBMVFC_CLIENT_MIGRATED;
+		login_info->flags |= IBMVFC_CLIENT_MIGRATED;
 
 	login_info->max_cmds = max_requests + IBMVFC_NUM_INTERNAL_REQ;
 	login_info->capabilities = IBMVFC_CAN_MIGRATE;
@@ -1452,6 +1485,27 @@ static void ibmvfc_log_error(struct ibmvfc_event *evt)
 }
 
 /**
+ * ibmvfc_relogin - Log back into the specified device
+ * @sdev:	scsi device struct
+ *
+ **/
+static void ibmvfc_relogin(struct scsi_device *sdev)
+{
+	struct ibmvfc_host *vhost = shost_priv(sdev->host);
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	struct ibmvfc_target *tgt;
+
+	list_for_each_entry(tgt, &vhost->targets, queue) {
+		if (rport == tgt->rport) {
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			break;
+		}
+	}
+
+	ibmvfc_reinit_host(vhost);
+}
+
+/**
  * ibmvfc_scsi_done - Handle responses from commands
  * @evt:	ibmvfc event to be handled
  *
@@ -1483,7 +1537,7 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
 				memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
 			if ((vfc_cmd->status & IBMVFC_VIOS_FAILURE) && (vfc_cmd->error == IBMVFC_PLOGI_REQUIRED))
-				ibmvfc_reinit_host(evt->vhost);
+				ibmvfc_relogin(cmnd->device);
 
 			if (!cmnd->result && (!scsi_get_resid(cmnd) || (rsp->flags & FCP_RESID_OVER)))
 				cmnd->result = (DID_ERROR << 16);
@@ -2148,13 +2202,31 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 				struct ibmvfc_host *vhost)
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
+	struct ibmvfc_target *tgt;
 
 	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
 		   " node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
-	case IBMVFC_AE_LINK_UP:
 	case IBMVFC_AE_RESUME:
+		switch (crq->link_state) {
+		case IBMVFC_AE_LS_LINK_DOWN:
+			ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+			break;
+		case IBMVFC_AE_LS_LINK_DEAD:
+			ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+			break;
+		case IBMVFC_AE_LS_LINK_UP:
+		case IBMVFC_AE_LS_LINK_BOUNCED:
+		default:
+			vhost->events_to_log |= IBMVFC_AE_LINKUP;
+			vhost->delay_init = 1;
+			__ibmvfc_reset_host(vhost);
+			break;
+		};
+
+		break;
+	case IBMVFC_AE_LINK_UP:
 		vhost->events_to_log |= IBMVFC_AE_LINKUP;
 		vhost->delay_init = 1;
 		__ibmvfc_reset_host(vhost);
@@ -2168,9 +2240,23 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 	case IBMVFC_AE_SCN_NPORT:
 	case IBMVFC_AE_SCN_GROUP:
 		vhost->events_to_log |= IBMVFC_AE_RSCN;
+		ibmvfc_reinit_host(vhost);
+		break;
 	case IBMVFC_AE_ELS_LOGO:
 	case IBMVFC_AE_ELS_PRLO:
 	case IBMVFC_AE_ELS_PLOGI:
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (!crq->scsi_id && !crq->wwpn && !crq->node_name)
+				break;
+			if (crq->scsi_id && tgt->scsi_id != crq->scsi_id)
+				continue;
+			if (crq->wwpn && tgt->ids.port_name != crq->wwpn)
+				continue;
+			if (crq->node_name && tgt->ids.node_name != crq->node_name)
+				continue;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		}
+
 		ibmvfc_reinit_host(vhost);
 		break;
 	case IBMVFC_AE_LINK_DOWN:
@@ -2222,6 +2308,7 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
 		return;
 	case IBMVFC_CRQ_XPORT_EVENT:
 		vhost->state = IBMVFC_NO_CRQ;
+		vhost->logged_in = 0;
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
 		if (crq->format == IBMVFC_PARTITION_MIGRATED) {
 			/* We need to re-setup the interpartition connection */
@@ -2299,7 +2386,7 @@ static int ibmvfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
 		done = 1;
 	}
 
-	if (vhost->state != IBMVFC_NO_CRQ && vhost->action == IBMVFC_HOST_ACTION_NONE)
+	if (vhost->scan_complete)
 		done = 1;
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	return done;
@@ -2434,14 +2521,6 @@ static ssize_t ibmvfc_show_host_partition_name(struct device *dev,
 			vhost->login_buf->resp.partition_name);
 }
 
-static struct device_attribute ibmvfc_host_partition_name = {
-	.attr = {
-		.name = "partition_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_partition_name,
-};
-
 static ssize_t ibmvfc_show_host_device_name(struct device *dev,
 					    struct device_attribute *attr, char *buf)
 {
@@ -2452,14 +2531,6 @@ static ssize_t ibmvfc_show_host_device_name(struct device *dev,
 			vhost->login_buf->resp.device_name);
 }
 
-static struct device_attribute ibmvfc_host_device_name = {
-	.attr = {
-		.name = "device_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_device_name,
-};
-
 static ssize_t ibmvfc_show_host_loc_code(struct device *dev,
 					 struct device_attribute *attr, char *buf)
 {
@@ -2470,14 +2541,6 @@ static ssize_t ibmvfc_show_host_loc_code(struct device *dev,
 			vhost->login_buf->resp.port_loc_code);
 }
 
-static struct device_attribute ibmvfc_host_loc_code = {
-	.attr = {
-		.name = "port_loc_code",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_loc_code,
-};
-
 static ssize_t ibmvfc_show_host_drc_name(struct device *dev,
 					 struct device_attribute *attr, char *buf)
 {
@@ -2488,14 +2551,6 @@ static ssize_t ibmvfc_show_host_drc_name(struct device *dev,
 			vhost->login_buf->resp.drc_name);
 }
 
-static struct device_attribute ibmvfc_host_drc_name = {
-	.attr = {
-		.name = "drc_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_drc_name,
-};
-
 static ssize_t ibmvfc_show_host_npiv_version(struct device *dev,
 					     struct device_attribute *attr, char *buf)
 {
@@ -2504,13 +2559,13 @@ static ssize_t ibmvfc_show_host_npiv_version(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "%d\n", vhost->login_buf->resp.version);
 }
 
-static struct device_attribute ibmvfc_host_npiv_version = {
-	.attr = {
-		.name = "npiv_version",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_npiv_version,
-};
+static ssize_t ibmvfc_show_host_capabilities(struct device *dev,
+					     struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvfc_host *vhost = shost_priv(shost);
+	return snprintf(buf, PAGE_SIZE, "%llx\n", vhost->login_buf->resp.capabilities);
+}
 
 /**
  * ibmvfc_show_log_level - Show the adapter's error logging level
@@ -2556,14 +2611,14 @@ static ssize_t ibmvfc_store_log_level(struct device *dev,
 	return strlen(buf);
 }
 
-static struct device_attribute ibmvfc_log_level_attr = {
-	.attr = {
-		.name =		"log_level",
-		.mode =		S_IRUGO | S_IWUSR,
-	},
-	.show = ibmvfc_show_log_level,
-	.store = ibmvfc_store_log_level
-};
+static DEVICE_ATTR(partition_name, S_IRUGO, ibmvfc_show_host_partition_name, NULL);
+static DEVICE_ATTR(device_name, S_IRUGO, ibmvfc_show_host_device_name, NULL);
+static DEVICE_ATTR(port_loc_code, S_IRUGO, ibmvfc_show_host_loc_code, NULL);
+static DEVICE_ATTR(drc_name, S_IRUGO, ibmvfc_show_host_drc_name, NULL);
+static DEVICE_ATTR(npiv_version, S_IRUGO, ibmvfc_show_host_npiv_version, NULL);
+static DEVICE_ATTR(capabilities, S_IRUGO, ibmvfc_show_host_capabilities, NULL);
+static DEVICE_ATTR(log_level, S_IRUGO | S_IWUSR,
+		   ibmvfc_show_log_level, ibmvfc_store_log_level);
 
 #ifdef CONFIG_SCSI_IBMVFC_TRACE
 /**
@@ -2612,12 +2667,13 @@ static struct bin_attribute ibmvfc_trace_attr = {
 #endif
 
 static struct device_attribute *ibmvfc_attrs[] = {
-	&ibmvfc_host_partition_name,
-	&ibmvfc_host_device_name,
-	&ibmvfc_host_loc_code,
-	&ibmvfc_host_drc_name,
-	&ibmvfc_host_npiv_version,
-	&ibmvfc_log_level_attr,
+	&dev_attr_partition_name,
+	&dev_attr_device_name,
+	&dev_attr_port_loc_code,
+	&dev_attr_drc_name,
+	&dev_attr_npiv_version,
+	&dev_attr_capabilities,
+	&dev_attr_log_level,
 	NULL
 };
 
@@ -2774,15 +2830,19 @@ static void ibmvfc_init_tgt(struct ibmvfc_target *tgt,
  * @tgt:		ibmvfc target struct
  * @job_step:	initialization job step
  *
+ * Returns: 1 if step will be retried / 0 if not
+ *
  **/
-static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
+static int ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
 				  void (*job_step) (struct ibmvfc_target *))
 {
 	if (++tgt->init_retries > IBMVFC_MAX_TGT_INIT_RETRIES) {
 		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		wake_up(&tgt->vhost->work_wait_q);
+		return 0;
 	} else
 		ibmvfc_init_tgt(tgt, job_step);
+	return 1;
 }
 
 /* Defined in FC-LS */
@@ -2831,7 +2891,7 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 	struct ibmvfc_process_login *rsp = &evt->xfer_iu->prli;
 	struct ibmvfc_prli_svc_parms *parms = &rsp->parms;
 	u32 status = rsp->common.status;
-	int index;
+	int index, level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2850,7 +2910,7 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_TARGET;
 					if (parms->service_parms & IBMVFC_PRLI_INITIATOR_FUNC)
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR;
-					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT);
+					tgt->add_rport = 1;
 				} else
 					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 			} else if (prli_rsp[index].retry)
@@ -2867,13 +2927,14 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error),
-			rsp->status, rsp->error, status);
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error),
+			rsp->status, rsp->error, status);
 		break;
 	};
 
@@ -2932,6 +2993,7 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt)
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_port_login *rsp = &evt->xfer_iu->plogi;
 	u32 status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2960,15 +3022,15 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
-			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
-			ibmvfc_get_ls_explain(rsp->fc_explain), rsp->fc_explain, status);
-
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
+			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
+			ibmvfc_get_ls_explain(rsp->fc_explain), rsp->fc_explain, status);
 		break;
 	};
 
@@ -3129,13 +3191,13 @@ static void ibmvfc_tgt_adisc_done(struct ibmvfc_event *evt)
 	case IBMVFC_MAD_SUCCESS:
 		tgt_dbg(tgt, "ADISC succeeded\n");
 		if (ibmvfc_adisc_needs_plogi(mad, tgt))
-			tgt->need_login = 1;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt->need_login = 1;
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		fc_reason = (mad->fc_iu.response[1] & 0x00ff0000) >> 16;
 		fc_explain = (mad->fc_iu.response[1] & 0x0000ff00) >> 8;
 		tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
@@ -3322,6 +3384,7 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_query_tgt *rsp = &evt->xfer_iu->query_tgt;
 	u32 status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -3341,19 +3404,19 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
-			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
-			ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
-
 		if ((rsp->status & IBMVFC_FABRIC_MAPPED) == IBMVFC_FABRIC_MAPPED &&
 		    rsp->error == IBMVFC_UNABLE_TO_PERFORM_REQ &&
 		    rsp->fc_explain == IBMVFC_PORT_NAME_NOT_REG)
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		else if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
+			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
+			ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
 		break;
 	};
 
@@ -3420,7 +3483,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id)
 	}
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
 
-	tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
+	tgt = mempool_alloc(vhost->tgt_pool, GFP_NOIO);
 	if (!tgt) {
 		dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
 			scsi_id);
@@ -3472,6 +3535,7 @@ static void ibmvfc_discover_targets_done(struct ibmvfc_event *evt)
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_discover_targets *rsp = &evt->xfer_iu->discover_targets;
 	u32 mad_status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	switch (mad_status) {
 	case IBMVFC_MAD_SUCCESS:
@@ -3480,9 +3544,9 @@ static void ibmvfc_discover_targets_done(struct ibmvfc_event *evt)
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_ALLOC_TGTS);
 		break;
 	case IBMVFC_MAD_FAILED:
-		dev_err(vhost->dev, "Discover Targets failed: %s (%x:%x)\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
-		ibmvfc_retry_host_init(vhost);
+		level += ibmvfc_retry_host_init(vhost);
+		ibmvfc_log(vhost, level, "Discover Targets failed: %s (%x:%x)\n",
+			   ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
@@ -3534,18 +3598,19 @@ static void ibmvfc_npiv_login_done(struct ibmvfc_event *evt)
 	u32 mad_status = evt->xfer_iu->npiv_login.common.status;
 	struct ibmvfc_npiv_login_resp *rsp = &vhost->login_buf->resp;
 	unsigned int npiv_max_sectors;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	switch (mad_status) {
 	case IBMVFC_MAD_SUCCESS:
 		ibmvfc_free_event(evt);
 		break;
 	case IBMVFC_MAD_FAILED:
-		dev_err(vhost->dev, "NPIV Login failed: %s (%x:%x)\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_host_init(vhost);
+			level += ibmvfc_retry_host_init(vhost);
 		else
 			ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+		ibmvfc_log(vhost, level, "NPIV Login failed: %s (%x:%x)\n",
+			   ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		ibmvfc_free_event(evt);
 		return;
 	case IBMVFC_MAD_CRQ_ERROR:
@@ -3578,6 +3643,7 @@ static void ibmvfc_npiv_login_done(struct ibmvfc_event *evt)
 		return;
 	}
 
+	vhost->logged_in = 1;
 	npiv_max_sectors = min((uint)(rsp->max_dma_len >> 9), IBMVFC_MAX_SECTORS);
 	dev_info(vhost->dev, "Host partition: %s, device: %s %s %s max sectors %u\n",
 		 rsp->partition_name, rsp->device_name, rsp->port_loc_code,
@@ -3636,6 +3702,65 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost)
 };
 
 /**
+ * ibmvfc_npiv_logout_done - Completion handler for NPIV Logout
+ * @vhost:		ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout_done(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_host *vhost = evt->vhost;
+	u32 mad_status = evt->xfer_iu->npiv_logout.common.status;
+
+	ibmvfc_free_event(evt);
+
+	switch (mad_status) {
+	case IBMVFC_MAD_SUCCESS:
+		if (list_empty(&vhost->sent) &&
+		    vhost->action == IBMVFC_HOST_ACTION_LOGO_WAIT) {
+			ibmvfc_init_host(vhost, 0);
+			return;
+		}
+		break;
+	case IBMVFC_MAD_FAILED:
+	case IBMVFC_MAD_NOT_SUPPORTED:
+	case IBMVFC_MAD_CRQ_ERROR:
+	case IBMVFC_MAD_DRIVER_FAILED:
+	default:
+		ibmvfc_dbg(vhost, "NPIV Logout failed. 0x%X\n", mad_status);
+		break;
+	}
+
+	ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_npiv_logout - Issue an NPIV Logout
+ * @vhost:		ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout(struct ibmvfc_host *vhost)
+{
+	struct ibmvfc_npiv_logout_mad *mad;
+	struct ibmvfc_event *evt;
+
+	evt = ibmvfc_get_event(vhost);
+	ibmvfc_init_event(evt, ibmvfc_npiv_logout_done, IBMVFC_MAD_FORMAT);
+
+	mad = &evt->iu.npiv_logout;
+	memset(mad, 0, sizeof(*mad));
+	mad->common.version = 1;
+	mad->common.opcode = IBMVFC_NPIV_LOGOUT;
+	mad->common.length = sizeof(struct ibmvfc_npiv_logout_mad);
+
+	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO_WAIT);
+
+	if (!ibmvfc_send_event(evt, vhost, default_timeout))
+		ibmvfc_dbg(vhost, "Sent NPIV logout\n");
+	else
+		ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+}
+
+/**
  * ibmvfc_dev_init_to_do - Is there target initialization work to do?
  * @vhost:		ibmvfc host struct
  *
@@ -3671,6 +3796,7 @@ static int __ibmvfc_work_to_do(struct ibmvfc_host *vhost)
 	switch (vhost->action) {
 	case IBMVFC_HOST_ACTION_NONE:
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
 		return 0;
 	case IBMVFC_HOST_ACTION_TGT_INIT:
 	case IBMVFC_HOST_ACTION_QUERY_TGTS:
@@ -3683,9 +3809,9 @@ static int __ibmvfc_work_to_do(struct ibmvfc_host *vhost)
 			if (tgt->action == IBMVFC_TGT_ACTION_INIT_WAIT)
 				return 0;
 		return 1;
+	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_ALLOC_TGTS:
-	case IBMVFC_HOST_ACTION_TGT_ADD:
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 	case IBMVFC_HOST_ACTION_QUERY:
@@ -3740,25 +3866,26 @@ static void ibmvfc_log_ae(struct ibmvfc_host *vhost, int events)
 static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 {
 	struct ibmvfc_host *vhost = tgt->vhost;
-	struct fc_rport *rport = tgt->rport;
+	struct fc_rport *rport;
 	unsigned long flags;
 
-	if (rport) {
-		tgt_dbg(tgt, "Setting rport roles\n");
-		fc_remote_port_rolechg(rport, tgt->ids.roles);
-		spin_lock_irqsave(vhost->host->host_lock, flags);
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+	tgt_dbg(tgt, "Adding rport\n");
+	rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+
+	if (rport && tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
+		tgt_dbg(tgt, "Deleting rport\n");
+		list_del(&tgt->queue);
 		spin_unlock_irqrestore(vhost->host->host_lock, flags);
+		fc_remote_port_delete(rport);
+		del_timer_sync(&tgt->timer);
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 		return;
 	}
 
-	tgt_dbg(tgt, "Adding rport\n");
-	rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
-	spin_lock_irqsave(vhost->host->host_lock, flags);
-	tgt->rport = rport;
-	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
 	if (rport) {
 		tgt_dbg(tgt, "rport add succeeded\n");
+		tgt->rport = rport;
 		rport->maxframe_size = tgt->service_parms.common.bb_rcv_sz & 0x0fff;
 		rport->supported_classes = 0;
 		tgt->target_id = rport->scsi_target_id;
@@ -3789,8 +3916,12 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 	vhost->events_to_log = 0;
 	switch (vhost->action) {
 	case IBMVFC_HOST_ACTION_NONE:
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
 		break;
+	case IBMVFC_HOST_ACTION_LOGO:
+		vhost->job_step(vhost);
+		break;
 	case IBMVFC_HOST_ACTION_INIT:
 		BUG_ON(vhost->state != IBMVFC_INITIALIZING);
 		if (vhost->delay_init) {
@@ -3836,11 +3967,21 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 
 		if (vhost->state == IBMVFC_INITIALIZING) {
 			if (vhost->action == IBMVFC_HOST_ACTION_TGT_DEL_FAILED) {
-				ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
-				ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_ADD);
-				vhost->init_retries = 0;
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				scsi_unblock_requests(vhost->host);
+				if (vhost->reinit) {
+					vhost->reinit = 0;
+					scsi_block_requests(vhost->host);
+					ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+				} else {
+					ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
+					ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
+					wake_up(&vhost->init_wait_q);
+					schedule_work(&vhost->rport_add_work_q);
+					vhost->init_retries = 0;
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					scsi_unblock_requests(vhost->host);
+				}
+
 				return;
 			} else {
 				ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
@@ -3871,24 +4012,6 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 		if (!ibmvfc_dev_init_to_do(vhost))
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_DEL_FAILED);
 		break;
-	case IBMVFC_HOST_ACTION_TGT_ADD:
-		list_for_each_entry(tgt, &vhost->targets, queue) {
-			if (tgt->action == IBMVFC_TGT_ACTION_ADD_RPORT) {
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				ibmvfc_tgt_add_rport(tgt);
-				return;
-			}
-		}
-
-		if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
-			vhost->reinit = 0;
-			scsi_block_requests(vhost->host);
-			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
-		} else {
-			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
-			wake_up(&vhost->init_wait_q);
-		}
-		break;
 	default:
 		break;
 	};
@@ -4118,6 +4241,56 @@ nomem:
 }
 
 /**
+ * ibmvfc_rport_add_thread - Worker thread for rport adds
+ * @work:	work struct
+ *
+ **/
+static void ibmvfc_rport_add_thread(struct work_struct *work)
+{
+	struct ibmvfc_host *vhost = container_of(work, struct ibmvfc_host,
+						 rport_add_work_q);
+	struct ibmvfc_target *tgt;
+	struct fc_rport *rport;
+	unsigned long flags;
+	int did_work;
+
+	ENTER;
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	do {
+		did_work = 0;
+		if (vhost->state != IBMVFC_ACTIVE)
+			break;
+
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (tgt->add_rport) {
+				did_work = 1;
+				tgt->add_rport = 0;
+				kref_get(&tgt->kref);
+				rport = tgt->rport;
+				if (!rport) {
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					ibmvfc_tgt_add_rport(tgt);
+				} else if (get_device(&rport->dev)) {
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					tgt_dbg(tgt, "Setting rport roles\n");
+					fc_remote_port_rolechg(rport, tgt->ids.roles);
+					put_device(&rport->dev);
+				}
+
+				kref_put(&tgt->kref, ibmvfc_release_tgt);
+				spin_lock_irqsave(vhost->host->host_lock, flags);
+				break;
+			}
+		}
+	} while(did_work);
+
+	if (vhost->state == IBMVFC_ACTIVE)
+		vhost->scan_complete = 1;
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	LEAVE;
+}
+
+/**
  * ibmvfc_probe - Adapter hot plug add entry point
  * @vdev:	vio device struct
  * @id:	vio device id struct
@@ -4160,6 +4333,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	strcpy(vhost->partition_name, "UNKNOWN");
 	init_waitqueue_head(&vhost->work_wait_q);
 	init_waitqueue_head(&vhost->init_wait_q);
+	INIT_WORK(&vhost->rport_add_work_q, ibmvfc_rport_add_thread);
 
 	if ((rc = ibmvfc_alloc_mem(vhost)))
 		goto free_scsi_host;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index ca1dcf7a756..c2668d7d67f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.5"
-#define IBMVFC_DRIVER_DATE		"(March 19, 2009)"
+#define IBMVFC_DRIVER_VERSION		"1.0.6"
+#define IBMVFC_DRIVER_DATE		"(May 28, 2009)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	60
 #define IBMVFC_ADISC_CANCEL_TIMEOUT	45
@@ -57,9 +57,10 @@
  * Ensure we have resources for ERP and initialization:
  * 1 for ERP
  * 1 for initialization
+ * 1 for NPIV Logout
  * 2 for each discovery thread
  */
-#define IBMVFC_NUM_INTERNAL_REQ	(1 + 1 + (disc_threads * 2))
+#define IBMVFC_NUM_INTERNAL_REQ	(1 + 1 + 1 + (disc_threads * 2))
 
 #define IBMVFC_MAD_SUCCESS		0x00
 #define IBMVFC_MAD_NOT_SUPPORTED	0xF1
@@ -127,6 +128,7 @@ enum ibmvfc_mad_types {
 	IBMVFC_IMPLICIT_LOGOUT	= 0x0040,
 	IBMVFC_PASSTHRU		= 0x0200,
 	IBMVFC_TMF_MAD		= 0x0100,
+	IBMVFC_NPIV_LOGOUT	= 0x0800,
 };
 
 struct ibmvfc_mad_common {
@@ -143,6 +145,10 @@ struct ibmvfc_npiv_login_mad {
 	struct srp_direct_buf buffer;
 }__attribute__((packed, aligned (8)));
 
+struct ibmvfc_npiv_logout_mad {
+	struct ibmvfc_mad_common common;
+}__attribute__((packed, aligned (8)));
+
 #define IBMVFC_MAX_NAME 256
 
 struct ibmvfc_npiv_login {
@@ -201,7 +207,8 @@ struct ibmvfc_npiv_login_resp {
 #define IBMVFC_NATIVE_FC		0x01
 #define IBMVFC_CAN_FLUSH_ON_HALT	0x08
 	u32 reserved;
-	u64 capabilites;
+	u64 capabilities;
+#define IBMVFC_CAN_FLUSH_ON_HALT	0x08
 	u32 max_cmds;
 	u32 scsi_id_sz;
 	u64 max_dma_len;
@@ -541,9 +548,17 @@ struct ibmvfc_crq_queue {
 	dma_addr_t msg_token;
 };
 
+enum ibmvfc_ae_link_state {
+	IBMVFC_AE_LS_LINK_UP		= 0x01,
+	IBMVFC_AE_LS_LINK_BOUNCED	= 0x02,
+	IBMVFC_AE_LS_LINK_DOWN		= 0x04,
+	IBMVFC_AE_LS_LINK_DEAD		= 0x08,
+};
+
 struct ibmvfc_async_crq {
 	volatile u8 valid;
-	u8 pad[3];
+	u8 link_state;
+	u8 pad[2];
 	u32 pad2;
 	volatile u64 event;
 	volatile u64 scsi_id;
@@ -561,6 +576,7 @@ struct ibmvfc_async_crq_queue {
 union ibmvfc_iu {
 	struct ibmvfc_mad_common mad_common;
 	struct ibmvfc_npiv_login_mad npiv_login;
+	struct ibmvfc_npiv_logout_mad npiv_logout;
 	struct ibmvfc_discover_targets discover_targets;
 	struct ibmvfc_port_login plogi;
 	struct ibmvfc_process_login prli;
@@ -575,7 +591,6 @@ enum ibmvfc_target_action {
 	IBMVFC_TGT_ACTION_NONE = 0,
 	IBMVFC_TGT_ACTION_INIT,
 	IBMVFC_TGT_ACTION_INIT_WAIT,
-	IBMVFC_TGT_ACTION_ADD_RPORT,
 	IBMVFC_TGT_ACTION_DEL_RPORT,
 };
 
@@ -588,6 +603,7 @@ struct ibmvfc_target {
 	int target_id;
 	enum ibmvfc_target_action action;
 	int need_login;
+	int add_rport;
 	int init_retries;
 	u32 cancel_key;
 	struct ibmvfc_service_parms service_parms;
@@ -627,6 +643,8 @@ struct ibmvfc_event_pool {
 
 enum ibmvfc_host_action {
 	IBMVFC_HOST_ACTION_NONE = 0,
+	IBMVFC_HOST_ACTION_LOGO,
+	IBMVFC_HOST_ACTION_LOGO_WAIT,
 	IBMVFC_HOST_ACTION_INIT,
 	IBMVFC_HOST_ACTION_INIT_WAIT,
 	IBMVFC_HOST_ACTION_QUERY,
@@ -635,7 +653,6 @@ enum ibmvfc_host_action {
 	IBMVFC_HOST_ACTION_ALLOC_TGTS,
 	IBMVFC_HOST_ACTION_TGT_INIT,
 	IBMVFC_HOST_ACTION_TGT_DEL_FAILED,
-	IBMVFC_HOST_ACTION_TGT_ADD,
 };
 
 enum ibmvfc_host_state {
@@ -682,6 +699,8 @@ struct ibmvfc_host {
 	int client_migrated;
 	int reinit;
 	int delay_init;
+	int scan_complete;
+	int logged_in;
 	int events_to_log;
 #define IBMVFC_AE_LINKUP	0x0001
 #define IBMVFC_AE_LINKDOWN	0x0002
@@ -692,6 +711,7 @@ struct ibmvfc_host {
 	void (*job_step) (struct ibmvfc_host *);
 	struct task_struct *work_thread;
 	struct tasklet_struct tasklet;
+	struct work_struct rport_add_work_q;
 	wait_queue_head_t init_wait_q;
 	wait_queue_head_t work_wait_q;
 };
@@ -707,6 +727,12 @@ struct ibmvfc_host {
 #define tgt_err(t, fmt, ...)		\
 	dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
+#define tgt_log(t, level, fmt, ...) \
+	do { \
+		if ((t)->vhost->log_level >= level) \
+			tgt_err(t, fmt, ##__VA_ARGS__); \
+	} while (0)
+
 #define ibmvfc_dbg(vhost, ...) \
 	DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index c9aa7611e40..11d2602ae88 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -70,6 +70,7 @@
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
 #include <asm/firmware.h>
@@ -87,9 +88,15 @@
  */
 static int max_id = 64;
 static int max_channel = 3;
-static int init_timeout = 5;
+static int init_timeout = 300;
+static int login_timeout = 60;
+static int info_timeout = 30;
+static int abort_timeout = 60;
+static int reset_timeout = 60;
 static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;
 static int max_events = IBMVSCSI_MAX_REQUESTS_DEFAULT + 2;
+static int fast_fail = 1;
+static int client_reserve = 1;
 
 static struct scsi_transport_template *ibmvscsi_transport_template;
 
@@ -110,6 +117,10 @@ module_param_named(init_timeout, init_timeout, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
 module_param_named(max_requests, max_requests, int, S_IRUGO);
 MODULE_PARM_DESC(max_requests, "Maximum requests for this adapter");
+module_param_named(fast_fail, fast_fail, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(fast_fail, "Enable fast fail. [Default=1]");
+module_param_named(client_reserve, client_reserve, int, S_IRUGO );
+MODULE_PARM_DESC(client_reserve, "Attempt client managed reserve/release");
 
 /* ------------------------------------------------------------
  * Routines for the event pool and event structs
@@ -781,105 +792,53 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 /* ------------------------------------------------------------
  * Routines for driver initialization
  */
+
 /**
- * adapter_info_rsp: - Handle response to MAD adapter info request
- * @evt_struct:	srp_event_struct with the response
+ * map_persist_bufs: - Pre-map persistent data for adapter logins
+ * @hostdata:   ibmvscsi_host_data of host
  *
- * Used as a "done" callback by when sending adapter_info. Gets called
- * by ibmvscsi_handle_crq()
-*/
-static void adapter_info_rsp(struct srp_event_struct *evt_struct)
+ * Map the capabilities and adapter info DMA buffers to avoid runtime failures.
+ * Return 1 on error, 0 on success.
+ */
+static int map_persist_bufs(struct ibmvscsi_host_data *hostdata)
 {
-	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
-	dma_unmap_single(hostdata->dev,
-			 evt_struct->iu.mad.adapter_info.buffer,
-			 evt_struct->iu.mad.adapter_info.common.length,
-			 DMA_BIDIRECTIONAL);
 
-	if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
-		dev_err(hostdata->dev, "error %d getting adapter info\n",
-			evt_struct->xfer_iu->mad.adapter_info.common.status);
-	} else {
-		dev_info(hostdata->dev, "host srp version: %s, "
-			 "host partition %s (%d), OS %d, max io %u\n",
-			 hostdata->madapter_info.srp_version,
-			 hostdata->madapter_info.partition_name,
-			 hostdata->madapter_info.partition_number,
-			 hostdata->madapter_info.os_type,
-			 hostdata->madapter_info.port_max_txu[0]);
-		
-		if (hostdata->madapter_info.port_max_txu[0]) 
-			hostdata->host->max_sectors = 
-				hostdata->madapter_info.port_max_txu[0] >> 9;
-		
-		if (hostdata->madapter_info.os_type == 3 &&
-		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
-			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
-				hostdata->madapter_info.srp_version);
-			dev_err(hostdata->dev, "limiting scatterlists to %d\n",
-				MAX_INDIRECT_BUFS);
-			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
-		}
+	hostdata->caps_addr = dma_map_single(hostdata->dev, &hostdata->caps,
+					     sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+
+	if (dma_mapping_error(hostdata->dev, hostdata->caps_addr)) {
+		dev_err(hostdata->dev, "Unable to map capabilities buffer!\n");
+		return 1;
 	}
+
+	hostdata->adapter_info_addr = dma_map_single(hostdata->dev,
+						     &hostdata->madapter_info,
+						     sizeof(hostdata->madapter_info),
+						     DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(hostdata->dev, hostdata->adapter_info_addr)) {
+		dev_err(hostdata->dev, "Unable to map adapter info buffer!\n");
+		dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+				 sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+		return 1;
+	}
+
+	return 0;
 }
 
 /**
- * send_mad_adapter_info: - Sends the mad adapter info request
- *      and stores the result so it can be retrieved with
- *      sysfs.  We COULD consider causing a failure if the
- *      returned SRP version doesn't match ours.
- * @hostdata:	ibmvscsi_host_data of host
- * 
- * Returns zero if successful.
-*/
-static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+ * unmap_persist_bufs: - Unmap persistent data needed for adapter logins
+ * @hostdata:   ibmvscsi_host_data of host
+ *
+ * Unmap the capabilities and adapter info DMA buffers
+ */
+static void unmap_persist_bufs(struct ibmvscsi_host_data *hostdata)
 {
-	struct viosrp_adapter_info *req;
-	struct srp_event_struct *evt_struct;
-	unsigned long flags;
-	dma_addr_t addr;
-
-	evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev,
-			"couldn't allocate an event for ADAPTER_INFO_REQ!\n");
-		return;
-	}
-
-	init_event_struct(evt_struct,
-			  adapter_info_rsp,
-			  VIOSRP_MAD_FORMAT,
-			  init_timeout);
-	
-	req = &evt_struct->iu.mad.adapter_info;
-	memset(req, 0x00, sizeof(*req));
-	
-	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
-	req->common.length = sizeof(hostdata->madapter_info);
-	req->buffer = addr = dma_map_single(hostdata->dev,
-					    &hostdata->madapter_info,
-					    sizeof(hostdata->madapter_info),
-					    DMA_BIDIRECTIONAL);
+	dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+			 sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(hostdata->dev, req->buffer)) {
-		if (!firmware_has_feature(FW_FEATURE_CMO))
-			dev_err(hostdata->dev,
-			        "Unable to map request_buffer for "
-			        "adapter_info!\n");
-		free_event_struct(&hostdata->pool, evt_struct);
-		return;
-	}
-	
-	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	if (ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2)) {
-		dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
-		dma_unmap_single(hostdata->dev,
-				 addr,
-				 sizeof(hostdata->madapter_info),
-				 DMA_BIDIRECTIONAL);
-	}
-	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-};
+	dma_unmap_single(hostdata->dev, hostdata->adapter_info_addr,
+			 sizeof(hostdata->madapter_info), DMA_BIDIRECTIONAL);
+}
 
 /**
  * login_rsp: - Handle response to SRP login request
@@ -909,9 +868,7 @@ static void login_rsp(struct srp_event_struct *evt_struct)
 	}
 
 	dev_info(hostdata->dev, "SRP_LOGIN succeeded\n");
-
-	if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta < 0)
-		dev_err(hostdata->dev, "Invalid request_limit.\n");
+	hostdata->client_migrated = 0;
 
 	/* Now we know what the real request-limit is.
 	 * This value is set rather than added to request_limit because
@@ -922,15 +879,12 @@ static void login_rsp(struct srp_event_struct *evt_struct)
 
 	/* If we had any pending I/Os, kick them */
 	scsi_unblock_requests(hostdata->host);
-
-	send_mad_adapter_info(hostdata);
-	return;
 }
 
 /**
  * send_srp_login: - Sends the srp login
  * @hostdata:	ibmvscsi_host_data of host
- * 
+ *
  * Returns zero if successful.
 */
 static int send_srp_login(struct ibmvscsi_host_data *hostdata)
@@ -939,22 +893,17 @@ static int send_srp_login(struct ibmvscsi_host_data *hostdata)
 	unsigned long flags;
 	struct srp_login_req *login;
 	struct srp_event_struct *evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev, "couldn't allocate an event for login req!\n");
-		return FAILED;
-	}
 
-	init_event_struct(evt_struct,
-			  login_rsp,
-			  VIOSRP_SRP_FORMAT,
-			  init_timeout);
+	BUG_ON(!evt_struct);
+	init_event_struct(evt_struct, login_rsp,
+			  VIOSRP_SRP_FORMAT, login_timeout);
 
 	login = &evt_struct->iu.srp.login_req;
-	memset(login, 0x00, sizeof(struct srp_login_req));
+	memset(login, 0, sizeof(*login));
 	login->opcode = SRP_LOGIN_REQ;
 	login->req_it_iu_len = sizeof(union srp_iu);
 	login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
-	
+
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
 	/* Start out with a request limit of 0, since this is negotiated in
 	 * the login request we are just sending and login requests always
@@ -962,13 +911,241 @@ static int send_srp_login(struct ibmvscsi_host_data *hostdata)
 	 */
 	atomic_set(&hostdata->request_limit, 0);
 
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, login_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 	dev_info(hostdata->dev, "sent SRP login\n");
 	return rc;
 };
 
 /**
+ * capabilities_rsp: - Handle response to MAD adapter capabilities request
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info.
+ */
+static void capabilities_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+	if (evt_struct->xfer_iu->mad.capabilities.common.status) {
+		dev_err(hostdata->dev, "error 0x%X getting capabilities info\n",
+			evt_struct->xfer_iu->mad.capabilities.common.status);
+	} else {
+		if (hostdata->caps.migration.common.server_support != SERVER_SUPPORTS_CAP)
+			dev_info(hostdata->dev, "Partition migration not supported\n");
+
+		if (client_reserve) {
+			if (hostdata->caps.reserve.common.server_support ==
+			    SERVER_SUPPORTS_CAP)
+				dev_info(hostdata->dev, "Client reserve enabled\n");
+			else
+				dev_info(hostdata->dev, "Client reserve not supported\n");
+		}
+	}
+
+	send_srp_login(hostdata);
+}
+
+/**
+ * send_mad_capabilities: - Sends the mad capabilities request
+ *      and stores the result so it can be retrieved with
+ * @hostdata:	ibmvscsi_host_data of host
+ */
+static void send_mad_capabilities(struct ibmvscsi_host_data *hostdata)
+{
+	struct viosrp_capabilities *req;
+	struct srp_event_struct *evt_struct;
+	unsigned long flags;
+	struct device_node *of_node = hostdata->dev->archdata.of_node;
+	const char *location;
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct, capabilities_rsp,
+			  VIOSRP_MAD_FORMAT, info_timeout);
+
+	req = &evt_struct->iu.mad.capabilities;
+	memset(req, 0, sizeof(*req));
+
+	hostdata->caps.flags = CAP_LIST_SUPPORTED;
+	if (hostdata->client_migrated)
+		hostdata->caps.flags |= CLIENT_MIGRATED;
+
+	strncpy(hostdata->caps.name, dev_name(&hostdata->host->shost_gendev),
+		sizeof(hostdata->caps.name));
+	hostdata->caps.name[sizeof(hostdata->caps.name) - 1] = '\0';
+
+	location = of_get_property(of_node, "ibm,loc-code", NULL);
+	location = location ? location : dev_name(hostdata->dev);
+	strncpy(hostdata->caps.loc, location, sizeof(hostdata->caps.loc));
+	hostdata->caps.loc[sizeof(hostdata->caps.loc) - 1] = '\0';
+
+	req->common.type = VIOSRP_CAPABILITIES_TYPE;
+	req->buffer = hostdata->caps_addr;
+
+	hostdata->caps.migration.common.cap_type = MIGRATION_CAPABILITIES;
+	hostdata->caps.migration.common.length = sizeof(hostdata->caps.migration);
+	hostdata->caps.migration.common.server_support = SERVER_SUPPORTS_CAP;
+	hostdata->caps.migration.ecl = 1;
+
+	if (client_reserve) {
+		hostdata->caps.reserve.common.cap_type = RESERVATION_CAPABILITIES;
+		hostdata->caps.reserve.common.length = sizeof(hostdata->caps.reserve);
+		hostdata->caps.reserve.common.server_support = SERVER_SUPPORTS_CAP;
+		hostdata->caps.reserve.type = CLIENT_RESERVE_SCSI_2;
+		req->common.length = sizeof(hostdata->caps);
+	} else
+		req->common.length = sizeof(hostdata->caps) - sizeof(hostdata->caps.reserve);
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+		dev_err(hostdata->dev, "couldn't send CAPABILITIES_REQ!\n");
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * fast_fail_rsp: - Handle response to MAD enable fast fail
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending enable fast fail. Gets called
+ * by ibmvscsi_handle_crq()
+ */
+static void fast_fail_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+	u8 status = evt_struct->xfer_iu->mad.fast_fail.common.status;
+
+	if (status == VIOSRP_MAD_NOT_SUPPORTED)
+		dev_err(hostdata->dev, "fast_fail not supported in server\n");
+	else if (status == VIOSRP_MAD_FAILED)
+		dev_err(hostdata->dev, "fast_fail request failed\n");
+	else if (status != VIOSRP_MAD_SUCCESS)
+		dev_err(hostdata->dev, "error 0x%X enabling fast_fail\n", status);
+
+	send_mad_capabilities(hostdata);
+}
+
+/**
+ * init_host - Start host initialization
+ * @hostdata:	ibmvscsi_host_data of host
+ *
+ * Returns zero if successful.
+ */
+static int enable_fast_fail(struct ibmvscsi_host_data *hostdata)
+{
+	int rc;
+	unsigned long flags;
+	struct viosrp_fast_fail *fast_fail_mad;
+	struct srp_event_struct *evt_struct;
+
+	if (!fast_fail) {
+		send_mad_capabilities(hostdata);
+		return 0;
+	}
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct, fast_fail_rsp, VIOSRP_MAD_FORMAT, info_timeout);
+
+	fast_fail_mad = &evt_struct->iu.mad.fast_fail;
+	memset(fast_fail_mad, 0, sizeof(*fast_fail_mad));
+	fast_fail_mad->common.type = VIOSRP_ENABLE_FAST_FAIL;
+	fast_fail_mad->common.length = sizeof(*fast_fail_mad);
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+	return rc;
+}
+
+/**
+ * adapter_info_rsp: - Handle response to MAD adapter info request
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info. Gets called
+ * by ibmvscsi_handle_crq()
+*/
+static void adapter_info_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+	if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
+		dev_err(hostdata->dev, "error %d getting adapter info\n",
+			evt_struct->xfer_iu->mad.adapter_info.common.status);
+	} else {
+		dev_info(hostdata->dev, "host srp version: %s, "
+			 "host partition %s (%d), OS %d, max io %u\n",
+			 hostdata->madapter_info.srp_version,
+			 hostdata->madapter_info.partition_name,
+			 hostdata->madapter_info.partition_number,
+			 hostdata->madapter_info.os_type,
+			 hostdata->madapter_info.port_max_txu[0]);
+		
+		if (hostdata->madapter_info.port_max_txu[0]) 
+			hostdata->host->max_sectors = 
+				hostdata->madapter_info.port_max_txu[0] >> 9;
+		
+		if (hostdata->madapter_info.os_type == 3 &&
+		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
+			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
+				hostdata->madapter_info.srp_version);
+			dev_err(hostdata->dev, "limiting scatterlists to %d\n",
+				MAX_INDIRECT_BUFS);
+			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
+		}
+	}
+
+	enable_fast_fail(hostdata);
+}
+
+/**
+ * send_mad_adapter_info: - Sends the mad adapter info request
+ *      and stores the result so it can be retrieved with
+ *      sysfs.  We COULD consider causing a failure if the
+ *      returned SRP version doesn't match ours.
+ * @hostdata:	ibmvscsi_host_data of host
+ * 
+ * Returns zero if successful.
+*/
+static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+	struct viosrp_adapter_info *req;
+	struct srp_event_struct *evt_struct;
+	unsigned long flags;
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct,
+			  adapter_info_rsp,
+			  VIOSRP_MAD_FORMAT,
+			  info_timeout);
+	
+	req = &evt_struct->iu.mad.adapter_info;
+	memset(req, 0x00, sizeof(*req));
+	
+	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
+	req->common.length = sizeof(hostdata->madapter_info);
+	req->buffer = hostdata->adapter_info_addr;
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+		dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * init_adapter: Start virtual adapter initialization sequence
+ *
+ */
+static void init_adapter(struct ibmvscsi_host_data *hostdata)
+{
+	send_mad_adapter_info(hostdata);
+}
+
+/**
  * sync_completion: Signal that a synchronous command has completed
  * Note that after returning from this call, the evt_struct is freed.
  * the caller waiting on this completion shouldn't touch the evt_struct
@@ -1029,7 +1206,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 		init_event_struct(evt,
 				  sync_completion,
 				  VIOSRP_SRP_FORMAT,
-				  init_timeout);
+				  abort_timeout);
 
 		tsk_mgmt = &evt->iu.srp.tsk_mgmt;
 	
@@ -1043,7 +1220,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 		evt->sync_srp = &srp_rsp;
 
 		init_completion(&evt->comp);
-		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, abort_timeout * 2);
 
 		if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
 			break;
@@ -1152,7 +1329,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
 		init_event_struct(evt,
 				  sync_completion,
 				  VIOSRP_SRP_FORMAT,
-				  init_timeout);
+				  reset_timeout);
 
 		tsk_mgmt = &evt->iu.srp.tsk_mgmt;
 
@@ -1165,7 +1342,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
 		evt->sync_srp = &srp_rsp;
 
 		init_completion(&evt->comp);
-		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, reset_timeout * 2);
 
 		if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
 			break;
@@ -1281,7 +1458,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			if ((rc = ibmvscsi_ops->send_crq(hostdata,
 							 0xC002000000000000LL, 0)) == 0) {
 				/* Now login */
-				send_srp_login(hostdata);
+				init_adapter(hostdata);
 			} else {
 				dev_err(hostdata->dev, "Unable to send init rsp. rc=%ld\n", rc);
 			}
@@ -1291,7 +1468,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			dev_info(hostdata->dev, "partner initialization complete\n");
 
 			/* Now login */
-			send_srp_login(hostdata);
+			init_adapter(hostdata);
 			break;
 		default:
 			dev_err(hostdata->dev, "unknown crq message type: %d\n", crq->format);
@@ -1303,6 +1480,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 		if (crq->format == 0x06) {
 			/* We need to re-setup the interpartition connection */
 			dev_info(hostdata->dev, "Re-enabling adapter!\n");
+			hostdata->client_migrated = 1;
 			purge_requests(hostdata, DID_REQUEUE);
 			if ((ibmvscsi_ops->reenable_crq_queue(&hostdata->queue,
 							      hostdata)) ||
@@ -1397,7 +1575,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 	init_event_struct(evt_struct,
 			  sync_completion,
 			  VIOSRP_MAD_FORMAT,
-			  init_timeout);
+			  info_timeout);
 
 	host_config = &evt_struct->iu.mad.host_config;
 
@@ -1419,7 +1597,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 
 	init_completion(&evt_struct->comp);
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 	if (rc == 0)
 		wait_for_completion(&evt_struct->comp);
@@ -1444,7 +1622,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev)
 	spin_lock_irqsave(shost->host_lock, lock_flags);
 	if (sdev->type == TYPE_DISK) {
 		sdev->allow_restart = 1;
-		blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
+		blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
 	}
 	scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
 	spin_unlock_irqrestore(shost->host_lock, lock_flags);
@@ -1471,6 +1649,46 @@ static int ibmvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth)
 /* ------------------------------------------------------------
  * sysfs attributes
  */
+static ssize_t show_host_vhost_loc(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+	int len;
+
+	len = snprintf(buf, sizeof(hostdata->caps.loc), "%s\n",
+		       hostdata->caps.loc);
+	return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_loc = {
+	.attr = {
+		 .name = "vhost_loc",
+		 .mode = S_IRUGO,
+		 },
+	.show = show_host_vhost_loc,
+};
+
+static ssize_t show_host_vhost_name(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+	int len;
+
+	len = snprintf(buf, sizeof(hostdata->caps.name), "%s\n",
+		       hostdata->caps.name);
+	return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_name = {
+	.attr = {
+		 .name = "vhost_name",
+		 .mode = S_IRUGO,
+		 },
+	.show = show_host_vhost_name,
+};
+
 static ssize_t show_host_srp_version(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
@@ -1594,6 +1812,8 @@ static struct device_attribute ibmvscsi_host_config = {
 };
 
 static struct device_attribute *ibmvscsi_attrs[] = {
+	&ibmvscsi_host_vhost_loc,
+	&ibmvscsi_host_vhost_name,
 	&ibmvscsi_host_srp_version,
 	&ibmvscsi_host_partition_name,
 	&ibmvscsi_host_partition_number,
@@ -1674,6 +1894,11 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	atomic_set(&hostdata->request_limit, -1);
 	hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
 
+	if (map_persist_bufs(hostdata)) {
+		dev_err(&vdev->dev, "couldn't map persistent buffers\n");
+		goto persist_bufs_failed;
+	}
+
 	rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_events);
 	if (rc != 0 && rc != H_RESOURCE) {
 		dev_err(&vdev->dev, "couldn't initialize crq. rc=%d\n", rc);
@@ -1687,6 +1912,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	host->max_lun = 8;
 	host->max_id = max_id;
 	host->max_channel = max_channel;
+	host->max_cmd_len = 16;
 
 	if (scsi_add_host(hostdata->host, hostdata->dev))
 		goto add_host_failed;
@@ -1733,6 +1959,8 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
       init_pool_failed:
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata, max_events);
       init_crq_failed:
+	unmap_persist_bufs(hostdata);
+      persist_bufs_failed:
 	scsi_host_put(host);
       scsi_host_alloc_failed:
 	return -1;
@@ -1741,6 +1969,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 static int ibmvscsi_remove(struct vio_dev *vdev)
 {
 	struct ibmvscsi_host_data *hostdata = vdev->dev.driver_data;
+	unmap_persist_bufs(hostdata);
 	release_event_pool(&hostdata->pool, hostdata);
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata,
 					max_events);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 2d4339d5e16..76425303def 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -90,6 +90,7 @@ struct event_pool {
 /* all driver data associated with a host adapter */
 struct ibmvscsi_host_data {
 	atomic_t request_limit;
+	int client_migrated;
 	struct device *dev;
 	struct event_pool pool;
 	struct crq_queue queue;
@@ -97,6 +98,9 @@ struct ibmvscsi_host_data {
 	struct list_head sent;
 	struct Scsi_Host *host;
 	struct mad_adapter_info_data madapter_info;
+	struct capabilities caps;
+	dma_addr_t caps_addr;
+	dma_addr_t adapter_info_addr;
 };
 
 /* routines for managing a command/response queue */
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 204604501ad..2cd735d1d19 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -37,6 +37,7 @@
 
 #define SRP_VERSION "16.a"
 #define SRP_MAX_IU_LEN	256
+#define SRP_MAX_LOC_LEN 32
 
 union srp_iu {
 	struct srp_login_req login_req;
@@ -86,7 +87,37 @@ enum viosrp_mad_types {
 	VIOSRP_EMPTY_IU_TYPE = 0x01,
 	VIOSRP_ERROR_LOG_TYPE = 0x02,
 	VIOSRP_ADAPTER_INFO_TYPE = 0x03,
-	VIOSRP_HOST_CONFIG_TYPE = 0x04
+	VIOSRP_HOST_CONFIG_TYPE = 0x04,
+	VIOSRP_CAPABILITIES_TYPE = 0x05,
+	VIOSRP_ENABLE_FAST_FAIL = 0x08,
+};
+
+enum viosrp_mad_status {
+	VIOSRP_MAD_SUCCESS = 0x00,
+	VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
+	VIOSRP_MAD_FAILED = 0xF7,
+};
+
+enum viosrp_capability_type {
+	MIGRATION_CAPABILITIES = 0x01,
+	RESERVATION_CAPABILITIES = 0x02,
+};
+
+enum viosrp_capability_support {
+	SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
+	SERVER_SUPPORTS_CAP = 0x01,
+	SERVER_CAP_DATA = 0x02,
+};
+
+enum viosrp_reserve_type {
+	CLIENT_RESERVE_SCSI_2 = 0x01,
+};
+
+enum viosrp_capability_flag {
+	CLIENT_MIGRATED = 0x01,
+	CLIENT_RECONNECT = 0x02,
+	CAP_LIST_SUPPORTED = 0x04,
+	CAP_LIST_DATA = 0x08,
 };
 
 /* 
@@ -127,11 +158,46 @@ struct viosrp_host_config {
 	u64 buffer;
 };
 
+struct viosrp_fast_fail {
+	struct mad_common common;
+};
+
+struct viosrp_capabilities {
+	struct mad_common common;
+	u64 buffer;
+};
+
+struct mad_capability_common {
+	u32 cap_type;
+	u16 length;
+	u16 server_support;
+};
+
+struct mad_reserve_cap {
+	struct mad_capability_common common;
+	u32 type;
+};
+
+struct mad_migration_cap {
+	struct mad_capability_common common;
+	u32 ecl;
+};
+
+struct capabilities{
+	u32 flags;
+	char name[SRP_MAX_LOC_LEN];
+	char loc[SRP_MAX_LOC_LEN];
+	struct mad_migration_cap migration;
+	struct mad_reserve_cap reserve;
+};
+
 union mad_iu {
 	struct viosrp_empty_iu empty_iu;
 	struct viosrp_error_log error_log;
 	struct viosrp_adapter_info adapter_info;
 	struct viosrp_host_config host_config;
+	struct viosrp_fast_fail fast_fail;
+	struct viosrp_capabilities capabilities;
 };
 
 union viosrp_iu {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index dd689ded860..0f8bc772b11 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -7003,6 +7003,7 @@ static void ipr_pci_perm_failure(struct pci_dev *pdev)
 		ioa_cfg->sdt_state = ABORT_DUMP;
 	ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
 	ioa_cfg->in_ioa_bringdown = 1;
+	ioa_cfg->allow_cmds = 0;
 	ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
 }
@@ -7688,7 +7689,7 @@ static void __ipr_remove(struct pci_dev *pdev)
  * Return value:
  * 	none
  **/
-static void ipr_remove(struct pci_dev *pdev)
+static void __devexit ipr_remove(struct pci_dev *pdev)
 {
 	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
 
@@ -7864,7 +7865,7 @@ static struct pci_driver ipr_driver = {
 	.name = IPR_NAME,
 	.id_table = ipr_pci_table,
 	.probe = ipr_probe,
-	.remove = ipr_remove,
+	.remove = __devexit_p(ipr_remove),
 	.shutdown = ipr_shutdown,
 	.err_handler = &ipr_err_handler,
 };
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 992af05aacf..7af9bceb8aa 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1159,6 +1159,10 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
 		atomic_inc(&mp->stats.xid_not_found);
 		goto out;
 	}
+	if (ep->esb_stat & ESB_ST_COMPLETE) {
+		atomic_inc(&mp->stats.xid_not_found);
+		goto out;
+	}
 	if (ep->rxid == FC_XID_UNKNOWN)
 		ep->rxid = ntohs(fh->fh_rx_id);
 	if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 521f996f9b1..ad8b747837b 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1896,7 +1896,7 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
 		break;
 	case FC_CMD_ABORTED:
-		sc_cmd->result = (DID_ABORT << 16) | fsp->io_status;
+		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
 		break;
 	case FC_CMD_TIME_OUT:
 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 747d73c5c8a..7bfbff7e0ef 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -478,7 +478,7 @@ static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
 	if (PTR_ERR(fp) == -FC_EX_CLOSED)
 		return fc_rport_error(rport, fp);
 
-	if (rdata->retries < rdata->local_port->max_retry_count) {
+	if (rdata->retries < rdata->local_port->max_rport_retry_count) {
 		FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
 			       PTR_ERR(fp), fc_rport_state(rport));
 		rdata->retries++;
@@ -1330,7 +1330,7 @@ int fc_rport_init(struct fc_lport *lport)
 }
 EXPORT_SYMBOL(fc_rport_init);
 
-int fc_setup_rport()
+int fc_setup_rport(void)
 {
 	rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
 	if (!rport_event_queue)
@@ -1339,7 +1339,7 @@ int fc_setup_rport()
 }
 EXPORT_SYMBOL(fc_setup_rport);
 
-void fc_destroy_rport()
+void fc_destroy_rport(void)
 {
 	destroy_workqueue(rport_event_queue);
 }
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index e72b4ad47d3..59908aead53 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -81,7 +81,8 @@ inline void iscsi_conn_queue_work(struct iscsi_conn *conn)
 	struct Scsi_Host *shost = conn->session->host;
 	struct iscsi_host *ihost = shost_priv(shost);
 
-	queue_work(ihost->workq, &conn->xmitwork);
+	if (ihost->workq)
+		queue_work(ihost->workq, &conn->xmitwork);
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_queue_work);
 
@@ -109,11 +110,9 @@ iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr)
 		 * if the window closed with IO queued, then kick the
 		 * xmit thread
 		 */
-		if (!list_empty(&session->leadconn->xmitqueue) ||
-		    !list_empty(&session->leadconn->mgmtqueue)) {
-			if (!(session->tt->caps & CAP_DATA_PATH_OFFLOAD))
-				iscsi_conn_queue_work(session->leadconn);
-		}
+		if (!list_empty(&session->leadconn->cmdqueue) ||
+		    !list_empty(&session->leadconn->mgmtqueue))
+			iscsi_conn_queue_work(session->leadconn);
 	}
 }
 EXPORT_SYMBOL_GPL(iscsi_update_cmdsn);
@@ -257,9 +256,11 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 	itt_t itt;
 	int rc;
 
-	rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
-	if (rc)
-		return rc;
+	if (conn->session->tt->alloc_pdu) {
+		rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
+		if (rc)
+			return rc;
+	}
 	hdr = (struct iscsi_cmd *) task->hdr;
 	itt = hdr->itt;
 	memset(hdr, 0, sizeof(*hdr));
@@ -364,7 +365,6 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 		return -EIO;
 
 	task->state = ISCSI_TASK_RUNNING;
-	list_move_tail(&task->running, &conn->run_list);
 
 	conn->scsicmd_pdus_cnt++;
 	ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x "
@@ -380,26 +380,25 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 }
 
 /**
- * iscsi_complete_command - finish a task
+ * iscsi_free_task - free a task
  * @task: iscsi cmd task
  *
  * Must be called with session lock.
  * This function returns the scsi command to scsi-ml or cleans
  * up mgmt tasks then returns the task to the pool.
  */
-static void iscsi_complete_command(struct iscsi_task *task)
+static void iscsi_free_task(struct iscsi_task *task)
 {
 	struct iscsi_conn *conn = task->conn;
 	struct iscsi_session *session = conn->session;
 	struct scsi_cmnd *sc = task->sc;
 
+	ISCSI_DBG_SESSION(session, "freeing task itt 0x%x state %d sc %p\n",
+			  task->itt, task->state, task->sc);
+
 	session->tt->cleanup_task(task);
-	list_del_init(&task->running);
-	task->state = ISCSI_TASK_COMPLETED;
+	task->state = ISCSI_TASK_FREE;
 	task->sc = NULL;
-
-	if (conn->task == task)
-		conn->task = NULL;
 	/*
 	 * login task is preallocated so do not free
 	 */
@@ -408,9 +407,6 @@ static void iscsi_complete_command(struct iscsi_task *task)
 
 	__kfifo_put(session->cmdpool.queue, (void*)&task, sizeof(void*));
 
-	if (conn->ping_task == task)
-		conn->ping_task = NULL;
-
 	if (sc) {
 		task->sc = NULL;
 		/* SCSI eh reuses commands to verify us */
@@ -433,7 +429,7 @@ EXPORT_SYMBOL_GPL(__iscsi_get_task);
 static void __iscsi_put_task(struct iscsi_task *task)
 {
 	if (atomic_dec_and_test(&task->refcount))
-		iscsi_complete_command(task);
+		iscsi_free_task(task);
 }
 
 void iscsi_put_task(struct iscsi_task *task)
@@ -446,26 +442,74 @@ void iscsi_put_task(struct iscsi_task *task)
 }
 EXPORT_SYMBOL_GPL(iscsi_put_task);
 
+/**
+ * iscsi_complete_task - finish a task
+ * @task: iscsi cmd task
+ * @state: state to complete task with
+ *
+ * Must be called with session lock.
+ */
+static void iscsi_complete_task(struct iscsi_task *task, int state)
+{
+	struct iscsi_conn *conn = task->conn;
+
+	ISCSI_DBG_SESSION(conn->session,
+			  "complete task itt 0x%x state %d sc %p\n",
+			  task->itt, task->state, task->sc);
+	if (task->state == ISCSI_TASK_COMPLETED ||
+	    task->state == ISCSI_TASK_ABRT_TMF ||
+	    task->state == ISCSI_TASK_ABRT_SESS_RECOV)
+		return;
+	WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
+	task->state = state;
+
+	if (!list_empty(&task->running))
+		list_del_init(&task->running);
+
+	if (conn->task == task)
+		conn->task = NULL;
+
+	if (conn->ping_task == task)
+		conn->ping_task = NULL;
+
+	/* release get from queueing */
+	__iscsi_put_task(task);
+}
+
 /*
- * session lock must be held
+ * session lock must be held and if not called for a task that is
+ * still pending or from the xmit thread, then xmit thread must
+ * be suspended.
  */
-static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task,
-			 int err)
+static void fail_scsi_task(struct iscsi_task *task, int err)
 {
+	struct iscsi_conn *conn = task->conn;
 	struct scsi_cmnd *sc;
+	int state;
 
+	/*
+	 * if a command completes and we get a successful tmf response
+	 * we will hit this because the scsi eh abort code does not take
+	 * a ref to the task.
+	 */
 	sc = task->sc;
 	if (!sc)
 		return;
 
-	if (task->state == ISCSI_TASK_PENDING)
+	if (task->state == ISCSI_TASK_PENDING) {
 		/*
 		 * cmd never made it to the xmit thread, so we should not count
 		 * the cmd in the sequencing
 		 */
 		conn->session->queued_cmdsn--;
+		/* it was never sent so just complete like normal */
+		state = ISCSI_TASK_COMPLETED;
+	} else if (err == DID_TRANSPORT_DISRUPTED)
+		state = ISCSI_TASK_ABRT_SESS_RECOV;
+	else
+		state = ISCSI_TASK_ABRT_TMF;
 
-	sc->result = err;
+	sc->result = err << 16;
 	if (!scsi_bidi_cmnd(sc))
 		scsi_set_resid(sc, scsi_bufflen(sc));
 	else {
@@ -473,10 +517,7 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task,
 		scsi_in(sc)->resid = scsi_in(sc)->length;
 	}
 
-	if (conn->task == task)
-		conn->task = NULL;
-	/* release ref from queuecommand */
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, state);
 }
 
 static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
@@ -516,7 +557,6 @@ static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
 		session->state = ISCSI_STATE_LOGGING_OUT;
 
 	task->state = ISCSI_TASK_RUNNING;
-	list_move_tail(&task->running, &conn->mgmt_run_list);
 	ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x "
 			  "datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK,
 			  hdr->itt, task->data_count);
@@ -528,6 +568,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		      char *data, uint32_t data_size)
 {
 	struct iscsi_session *session = conn->session;
+	struct iscsi_host *ihost = shost_priv(session->host);
 	struct iscsi_task *task;
 	itt_t itt;
 
@@ -544,6 +585,9 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		 */
 		task = conn->login_task;
 	else {
+		if (session->state != ISCSI_STATE_LOGGED_IN)
+			return NULL;
+
 		BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
 		BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
 
@@ -559,6 +603,8 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	atomic_set(&task->refcount, 1);
 	task->conn = conn;
 	task->sc = NULL;
+	INIT_LIST_HEAD(&task->running);
+	task->state = ISCSI_TASK_PENDING;
 
 	if (data_size) {
 		memcpy(task->data, data, data_size);
@@ -566,11 +612,14 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	} else
 		task->data_count = 0;
 
-	if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
-		iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
-				 "pdu for mgmt task.\n");
-		goto requeue_task;
+	if (conn->session->tt->alloc_pdu) {
+		if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
+			iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
+					 "pdu for mgmt task.\n");
+			goto free_task;
+		}
 	}
+
 	itt = task->hdr->itt;
 	task->hdr_len = sizeof(struct iscsi_hdr);
 	memcpy(task->hdr, hdr, sizeof(struct iscsi_hdr));
@@ -583,30 +632,22 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 						   task->conn->session->age);
 	}
 
-	INIT_LIST_HEAD(&task->running);
-	list_add_tail(&task->running, &conn->mgmtqueue);
-
-	if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+	if (!ihost->workq) {
 		if (iscsi_prep_mgmt_task(conn, task))
 			goto free_task;
 
 		if (session->tt->xmit_task(task))
 			goto free_task;
-
-	} else
+	} else {
+		list_add_tail(&task->running, &conn->mgmtqueue);
 		iscsi_conn_queue_work(conn);
+	}
 
 	return task;
 
 free_task:
 	__iscsi_put_task(task);
 	return NULL;
-
-requeue_task:
-	if (task != conn->login_task)
-		__kfifo_put(session->cmdpool.queue, (void*)&task,
-			    sizeof(void*));
-	return NULL;
 }
 
 int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr,
@@ -701,11 +742,10 @@ invalid_datalen:
 			sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
 	}
 out:
-	ISCSI_DBG_SESSION(session, "done [sc %p res %d itt 0x%x]\n",
+	ISCSI_DBG_SESSION(session, "cmd rsp done [sc %p res %d itt 0x%x]\n",
 			  sc, sc->result, task->itt);
 	conn->scsirsp_pdus_cnt++;
-
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 }
 
 /**
@@ -724,6 +764,7 @@ iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
 		return;
 
+	iscsi_update_cmdsn(conn->session, (struct iscsi_nopin *)hdr);
 	sc->result = (DID_OK << 16) | rhdr->cmd_status;
 	conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1;
 	if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW |
@@ -738,8 +779,11 @@ iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
 	}
 
+	ISCSI_DBG_SESSION(conn->session, "data in with status done "
+			  "[sc %p res %d itt 0x%x]\n",
+			  sc, sc->result, task->itt);
 	conn->scsirsp_pdus_cnt++;
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 }
 
 static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
@@ -823,7 +867,7 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
  *
  * The session lock must be held.
  */
-static struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
+struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
 {
 	struct iscsi_session *session = conn->session;
 	int i;
@@ -840,6 +884,7 @@ static struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
 
 	return session->cmds[i];
 }
+EXPORT_SYMBOL_GPL(iscsi_itt_to_task);
 
 /**
  * __iscsi_complete_pdu - complete pdu
@@ -959,7 +1004,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		}
 
 		iscsi_tmf_rsp(conn, hdr);
-		__iscsi_put_task(task);
+		iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 		break;
 	case ISCSI_OP_NOOP_IN:
 		iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
@@ -977,7 +1022,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			goto recv_pdu;
 
 		mod_timer(&conn->transport_timer, jiffies + conn->recv_timeout);
-		__iscsi_put_task(task);
+		iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 		break;
 	default:
 		rc = ISCSI_ERR_BAD_OPCODE;
@@ -989,7 +1034,7 @@ out:
 recv_pdu:
 	if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
 		rc = ISCSI_ERR_CONN_FAILED;
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(__iscsi_complete_pdu);
@@ -1166,7 +1211,12 @@ void iscsi_requeue_task(struct iscsi_task *task)
 {
 	struct iscsi_conn *conn = task->conn;
 
-	list_move_tail(&task->running, &conn->requeue);
+	/*
+	 * this may be on the requeue list already if the xmit_task callout
+	 * is handling the r2ts while we are adding new ones
+	 */
+	if (list_empty(&task->running))
+		list_add_tail(&task->running, &conn->requeue);
 	iscsi_conn_queue_work(conn);
 }
 EXPORT_SYMBOL_GPL(iscsi_requeue_task);
@@ -1206,6 +1256,7 @@ check_mgmt:
 	while (!list_empty(&conn->mgmtqueue)) {
 		conn->task = list_entry(conn->mgmtqueue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		if (iscsi_prep_mgmt_task(conn, conn->task)) {
 			__iscsi_put_task(conn->task);
 			conn->task = NULL;
@@ -1217,23 +1268,26 @@ check_mgmt:
 	}
 
 	/* process pending command queue */
-	while (!list_empty(&conn->xmitqueue)) {
+	while (!list_empty(&conn->cmdqueue)) {
 		if (conn->tmf_state == TMF_QUEUED)
 			break;
 
-		conn->task = list_entry(conn->xmitqueue.next,
+		conn->task = list_entry(conn->cmdqueue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
-			fail_command(conn, conn->task, DID_IMM_RETRY << 16);
+			fail_scsi_task(conn->task, DID_IMM_RETRY);
 			continue;
 		}
 		rc = iscsi_prep_scsi_cmd_pdu(conn->task);
 		if (rc) {
 			if (rc == -ENOMEM) {
+				list_add_tail(&conn->task->running,
+					      &conn->cmdqueue);
 				conn->task = NULL;
 				goto again;
 			} else
-				fail_command(conn, conn->task, DID_ABORT << 16);
+				fail_scsi_task(conn->task, DID_ABORT);
 			continue;
 		}
 		rc = iscsi_xmit_task(conn);
@@ -1260,8 +1314,8 @@ check_mgmt:
 
 		conn->task = list_entry(conn->requeue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		conn->task->state = ISCSI_TASK_RUNNING;
-		list_move_tail(conn->requeue.next, &conn->run_list);
 		rc = iscsi_xmit_task(conn);
 		if (rc)
 			goto again;
@@ -1328,6 +1382,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	struct iscsi_cls_session *cls_session;
 	struct Scsi_Host *host;
+	struct iscsi_host *ihost;
 	int reason = 0;
 	struct iscsi_session *session;
 	struct iscsi_conn *conn;
@@ -1338,6 +1393,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	sc->SCp.ptr = NULL;
 
 	host = sc->device->host;
+	ihost = shost_priv(host);
 	spin_unlock(host->host_lock);
 
 	cls_session = starget_to_session(scsi_target(sc->device));
@@ -1350,13 +1406,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 		goto fault;
 	}
 
-	/*
-	 * ISCSI_STATE_FAILED is a temp. state. The recovery
-	 * code will decide what is best to do with command queued
-	 * during this time
-	 */
-	if (session->state != ISCSI_STATE_LOGGED_IN &&
-	    session->state != ISCSI_STATE_FAILED) {
+	if (session->state != ISCSI_STATE_LOGGED_IN) {
 		/*
 		 * to handle the race between when we set the recovery state
 		 * and block the session we requeue here (commands could
@@ -1364,12 +1414,15 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 		 * up because the block code is not locked)
 		 */
 		switch (session->state) {
+		case ISCSI_STATE_FAILED:
 		case ISCSI_STATE_IN_RECOVERY:
 			reason = FAILURE_SESSION_IN_RECOVERY;
-			goto reject;
+			sc->result = DID_IMM_RETRY << 16;
+			break;
 		case ISCSI_STATE_LOGGING_OUT:
 			reason = FAILURE_SESSION_LOGGING_OUT;
-			goto reject;
+			sc->result = DID_IMM_RETRY << 16;
+			break;
 		case ISCSI_STATE_RECOVERY_FAILED:
 			reason = FAILURE_SESSION_RECOVERY_TIMEOUT;
 			sc->result = DID_TRANSPORT_FAILFAST << 16;
@@ -1402,9 +1455,8 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 		reason = FAILURE_OOM;
 		goto reject;
 	}
-	list_add_tail(&task->running, &conn->xmitqueue);
 
-	if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+	if (!ihost->workq) {
 		reason = iscsi_prep_scsi_cmd_pdu(task);
 		if (reason) {
 			if (reason == -ENOMEM) {
@@ -1419,8 +1471,10 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			reason = FAILURE_SESSION_NOT_READY;
 			goto prepd_reject;
 		}
-	} else
+	} else {
+		list_add_tail(&task->running, &conn->cmdqueue);
 		iscsi_conn_queue_work(conn);
+	}
 
 	session->queued_cmdsn++;
 	spin_unlock(&session->lock);
@@ -1429,7 +1483,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 
 prepd_reject:
 	sc->scsi_done = NULL;
-	iscsi_complete_command(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 reject:
 	spin_unlock(&session->lock);
 	ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n",
@@ -1439,7 +1493,7 @@ reject:
 
 prepd_fault:
 	sc->scsi_done = NULL;
-	iscsi_complete_command(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 fault:
 	spin_unlock(&session->lock);
 	ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n",
@@ -1608,44 +1662,24 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
  * Fail commands. session lock held and recv side suspended and xmit
  * thread flushed
  */
-static void fail_all_commands(struct iscsi_conn *conn, unsigned lun,
-			      int error)
+static void fail_scsi_tasks(struct iscsi_conn *conn, unsigned lun,
+			    int error)
 {
-	struct iscsi_task *task, *tmp;
-
-	if (conn->task) {
-		if (lun == -1 ||
-		    (conn->task->sc && conn->task->sc->device->lun == lun))
-			conn->task = NULL;
-	}
+	struct iscsi_task *task;
+	int i;
 
-	/* flush pending */
-	list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					  "failing pending sc %p itt 0x%x\n",
-					  task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
-	}
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		task = conn->session->cmds[i];
+		if (!task->sc || task->state == ISCSI_TASK_FREE)
+			continue;
 
-	list_for_each_entry_safe(task, tmp, &conn->requeue, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					  "failing requeued sc %p itt 0x%x\n",
-					  task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
-	}
+		if (lun != -1 && lun != task->sc->device->lun)
+			continue;
 
-	/* fail all other running */
-	list_for_each_entry_safe(task, tmp, &conn->run_list, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					 "failing in progress sc %p itt 0x%x\n",
-					 task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
+		ISCSI_DBG_SESSION(conn->session,
+				  "failing sc %p itt 0x%x state %d\n",
+				  task->sc, task->itt, task->state);
+		fail_scsi_task(task, error);
 	}
 }
 
@@ -1655,7 +1689,7 @@ void iscsi_suspend_tx(struct iscsi_conn *conn)
 	struct iscsi_host *ihost = shost_priv(shost);
 
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
+	if (ihost->workq)
 		flush_workqueue(ihost->workq);
 }
 EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
@@ -1663,8 +1697,23 @@ EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
 static void iscsi_start_tx(struct iscsi_conn *conn)
 {
 	clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
-		iscsi_conn_queue_work(conn);
+	iscsi_conn_queue_work(conn);
+}
+
+/*
+ * We want to make sure a ping is in flight. It has timed out.
+ * And we are not busy processing a pdu that is making
+ * progress but got started before the ping and is taking a while
+ * to complete so the ping is just stuck behind it in a queue.
+ */
+static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
+{
+	if (conn->ping_task &&
+	    time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
+			   (conn->ping_timeout * HZ), jiffies))
+		return 1;
+	else
+		return 0;
 }
 
 static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
@@ -1702,16 +1751,20 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
 	 * if the ping timedout then we are in the middle of cleaning up
 	 * and can let the iscsi eh handle it
 	 */
-	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
-			    (conn->ping_timeout * HZ), jiffies))
+	if (iscsi_has_ping_timed_out(conn)) {
 		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
 	/*
 	 * if we are about to check the transport then give the command
 	 * more time
 	 */
 	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ),
-			   jiffies))
+			   jiffies)) {
 		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
+
 	/* if in the middle of checking the transport then give us more time */
 	if (conn->ping_task)
 		rc = BLK_EH_RESET_TIMER;
@@ -1738,13 +1791,13 @@ static void iscsi_check_transport_timeouts(unsigned long data)
 
 	recv_timeout *= HZ;
 	last_recv = conn->last_recv;
-	if (conn->ping_task &&
-	    time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
-			   jiffies)) {
+
+	if (iscsi_has_ping_timed_out(conn)) {
 		iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
-				  "expired, last rx %lu, last ping %lu, "
-				  "now %lu\n", conn->ping_timeout, last_recv,
-				  conn->last_ping, jiffies);
+				  "expired, recv timeout %d, last rx %lu, "
+				  "last ping %lu, now %lu\n",
+				  conn->ping_timeout, conn->recv_timeout,
+				  last_recv, conn->last_ping, jiffies);
 		spin_unlock(&session->lock);
 		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 		return;
@@ -1788,6 +1841,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
 
+	ISCSI_DBG_SESSION(session, "aborting sc %p\n", sc);
+
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
 	/*
@@ -1810,6 +1865,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	    sc->SCp.phase != session->age) {
 		spin_unlock_bh(&session->lock);
 		mutex_unlock(&session->eh_mutex);
+		ISCSI_DBG_SESSION(session, "failing abort due to dropped "
+				  "session.\n");
 		return FAILED;
 	}
 
@@ -1829,7 +1886,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	}
 
 	if (task->state == ISCSI_TASK_PENDING) {
-		fail_command(conn, task, DID_ABORT << 16);
+		fail_scsi_task(task, DID_ABORT);
 		goto success;
 	}
 
@@ -1860,7 +1917,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		 * then sent more data for the cmd.
 		 */
 		spin_lock(&session->lock);
-		fail_command(conn, task, DID_ABORT << 16);
+		fail_scsi_task(task, DID_ABORT);
 		conn->tmf_state = TMF_INITIAL;
 		spin_unlock(&session->lock);
 		iscsi_start_tx(conn);
@@ -1967,7 +2024,7 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc)
 	iscsi_suspend_tx(conn);
 
 	spin_lock_bh(&session->lock);
-	fail_all_commands(conn, sc->device->lun, DID_ERROR);
+	fail_scsi_tasks(conn, sc->device->lun, DID_ERROR);
 	conn->tmf_state = TMF_INITIAL;
 	spin_unlock_bh(&session->lock);
 
@@ -2274,6 +2331,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
 		if (cmd_task_size)
 			task->dd_data = &task[1];
 		task->itt = cmd_i;
+		task->state = ISCSI_TASK_FREE;
 		INIT_LIST_HEAD(&task->running);
 	}
 
@@ -2360,10 +2418,8 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size,
 	conn->transport_timer.data = (unsigned long)conn;
 	conn->transport_timer.function = iscsi_check_transport_timeouts;
 
-	INIT_LIST_HEAD(&conn->run_list);
-	INIT_LIST_HEAD(&conn->mgmt_run_list);
 	INIT_LIST_HEAD(&conn->mgmtqueue);
-	INIT_LIST_HEAD(&conn->xmitqueue);
+	INIT_LIST_HEAD(&conn->cmdqueue);
 	INIT_LIST_HEAD(&conn->requeue);
 	INIT_WORK(&conn->xmitwork, iscsi_xmitworker);
 
@@ -2531,27 +2587,28 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
 EXPORT_SYMBOL_GPL(iscsi_conn_start);
 
 static void
-flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn)
+fail_mgmt_tasks(struct iscsi_session *session, struct iscsi_conn *conn)
 {
-	struct iscsi_task *task, *tmp;
+	struct iscsi_task *task;
+	int i, state;
 
-	/* handle pending */
-	list_for_each_entry_safe(task, tmp, &conn->mgmtqueue, running) {
-		ISCSI_DBG_SESSION(session, "flushing pending mgmt task "
-				  "itt 0x%x\n", task->itt);
-		/* release ref from prep task */
-		__iscsi_put_task(task);
-	}
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		task = conn->session->cmds[i];
+		if (task->sc)
+			continue;
 
-	/* handle running */
-	list_for_each_entry_safe(task, tmp, &conn->mgmt_run_list, running) {
-		ISCSI_DBG_SESSION(session, "flushing running mgmt task "
-				  "itt 0x%x\n", task->itt);
-		/* release ref from prep task */
-		__iscsi_put_task(task);
-	}
+		if (task->state == ISCSI_TASK_FREE)
+			continue;
+
+		ISCSI_DBG_SESSION(conn->session,
+				  "failing mgmt itt 0x%x state %d\n",
+				  task->itt, task->state);
+		state = ISCSI_TASK_ABRT_SESS_RECOV;
+		if (task->state == ISCSI_TASK_PENDING)
+			state = ISCSI_TASK_COMPLETED;
+		iscsi_complete_task(task, state);
 
-	conn->task = NULL;
+	}
 }
 
 static void iscsi_start_session_recovery(struct iscsi_session *session,
@@ -2559,8 +2616,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 {
 	int old_stop_stage;
 
-	del_timer_sync(&conn->transport_timer);
-
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
 	if (conn->stop_stage == STOP_CONN_TERM) {
@@ -2578,13 +2633,17 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 		session->state = ISCSI_STATE_TERMINATE;
 	else if (conn->stop_stage != STOP_CONN_RECOVER)
 		session->state = ISCSI_STATE_IN_RECOVERY;
+	spin_unlock_bh(&session->lock);
+
+	del_timer_sync(&conn->transport_timer);
+	iscsi_suspend_tx(conn);
 
+	spin_lock_bh(&session->lock);
 	old_stop_stage = conn->stop_stage;
 	conn->stop_stage = flag;
 	conn->c_stage = ISCSI_CONN_STOPPED;
 	spin_unlock_bh(&session->lock);
 
-	iscsi_suspend_tx(conn);
 	/*
 	 * for connection level recovery we should not calculate
 	 * header digest. conn->hdr_size used for optimization
@@ -2605,11 +2664,8 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 	 * flush queues.
 	 */
 	spin_lock_bh(&session->lock);
-	if (flag == STOP_CONN_RECOVER)
-		fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED);
-	else
-		fail_all_commands(conn, -1, DID_ERROR);
-	flush_control_queues(session, conn);
+	fail_scsi_tasks(conn, -1, DID_TRANSPORT_DISRUPTED);
+	fail_mgmt_tasks(session, conn);
 	spin_unlock_bh(&session->lock);
 	mutex_unlock(&session->eh_mutex);
 }
@@ -2651,6 +2707,23 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_bind);
 
+static int iscsi_switch_str_param(char **param, char *new_val_buf)
+{
+	char *new_val;
+
+	if (*param) {
+		if (!strcmp(*param, new_val_buf))
+			return 0;
+	}
+
+	new_val = kstrdup(new_val_buf, GFP_NOIO);
+	if (!new_val)
+		return -ENOMEM;
+
+	kfree(*param);
+	*param = new_val;
+	return 0;
+}
 
 int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		    enum iscsi_param param, char *buf, int buflen)
@@ -2723,38 +2796,15 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		sscanf(buf, "%u", &conn->exp_statsn);
 		break;
 	case ISCSI_PARAM_USERNAME:
-		kfree(session->username);
-		session->username = kstrdup(buf, GFP_KERNEL);
-		if (!session->username)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->username, buf);
 	case ISCSI_PARAM_USERNAME_IN:
-		kfree(session->username_in);
-		session->username_in = kstrdup(buf, GFP_KERNEL);
-		if (!session->username_in)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->username_in, buf);
 	case ISCSI_PARAM_PASSWORD:
-		kfree(session->password);
-		session->password = kstrdup(buf, GFP_KERNEL);
-		if (!session->password)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->password, buf);
 	case ISCSI_PARAM_PASSWORD_IN:
-		kfree(session->password_in);
-		session->password_in = kstrdup(buf, GFP_KERNEL);
-		if (!session->password_in)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->password_in, buf);
 	case ISCSI_PARAM_TARGET_NAME:
-		/* this should not change between logins */
-		if (session->targetname)
-			break;
-
-		session->targetname = kstrdup(buf, GFP_KERNEL);
-		if (!session->targetname)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->targetname, buf);
 	case ISCSI_PARAM_TPGT:
 		sscanf(buf, "%d", &session->tpgt);
 		break;
@@ -2762,25 +2812,11 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		sscanf(buf, "%d", &conn->persistent_port);
 		break;
 	case ISCSI_PARAM_PERSISTENT_ADDRESS:
-		/*
-		 * this is the address returned in discovery so it should
-		 * not change between logins.
-		 */
-		if (conn->persistent_address)
-			break;
-
-		conn->persistent_address = kstrdup(buf, GFP_KERNEL);
-		if (!conn->persistent_address)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&conn->persistent_address, buf);
 	case ISCSI_PARAM_IFACE_NAME:
-		if (!session->ifacename)
-			session->ifacename = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&session->ifacename, buf);
 	case ISCSI_PARAM_INITIATOR_NAME:
-		if (!session->initiatorname)
-			session->initiatorname = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&session->initiatorname, buf);
 	default:
 		return -ENOSYS;
 	}
@@ -2851,10 +2887,7 @@ int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
 		len = sprintf(buf, "%s\n", session->ifacename);
 		break;
 	case ISCSI_PARAM_INITIATOR_NAME:
-		if (!session->initiatorname)
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n", session->initiatorname);
+		len = sprintf(buf, "%s\n", session->initiatorname);
 		break;
 	default:
 		return -ENOSYS;
@@ -2920,29 +2953,16 @@ int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param,
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		if (!ihost->netdev)
-			len = sprintf(buf, "%s\n", "default");
-		else
-			len = sprintf(buf, "%s\n", ihost->netdev);
+		len = sprintf(buf, "%s\n", ihost->netdev);
 		break;
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		if (!ihost->hwaddress)
-			len = sprintf(buf, "%s\n", "default");
-		else
-			len = sprintf(buf, "%s\n", ihost->hwaddress);
+		len = sprintf(buf, "%s\n", ihost->hwaddress);
 		break;
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		if (!ihost->initiatorname)
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n", ihost->initiatorname);
+		len = sprintf(buf, "%s\n", ihost->initiatorname);
 		break;
 	case ISCSI_HOST_PARAM_IPADDRESS:
-		if (!strlen(ihost->local_address))
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n",
-				      ihost->local_address);
+		len = sprintf(buf, "%s\n", ihost->local_address);
 		break;
 	default:
 		return -ENOSYS;
@@ -2959,17 +2979,11 @@ int iscsi_host_set_param(struct Scsi_Host *shost, enum iscsi_host_param param,
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		if (!ihost->netdev)
-			ihost->netdev = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->netdev, buf);
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		if (!ihost->hwaddress)
-			ihost->hwaddress = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->hwaddress, buf);
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		if (!ihost->initiatorname)
-			ihost->initiatorname = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->initiatorname, buf);
 	default:
 		return -ENOSYS;
 	}
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index b579ca9f483..2bc07090321 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -440,8 +440,8 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task)
 	struct iscsi_tcp_task *tcp_task = task->dd_data;
 	struct iscsi_r2t_info *r2t;
 
-	/* nothing to do for mgmt or pending tasks */
-	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+	/* nothing to do for mgmt */
+	if (!task->sc)
 		return;
 
 	/* flush task's r2t queues */
@@ -473,7 +473,13 @@ static int iscsi_tcp_data_in(struct iscsi_conn *conn, struct iscsi_task *task)
 	int datasn = be32_to_cpu(rhdr->datasn);
 	unsigned total_in_length = scsi_in(task->sc)->length;
 
-	iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+	/*
+	 * lib iscsi will update this in the completion handling if there
+	 * is status.
+	 */
+	if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
+		iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+
 	if (tcp_conn->in.datalen == 0)
 		return 0;
 
@@ -857,6 +863,12 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb,
 	int rc = 0;
 
 	ISCSI_DBG_TCP(conn, "in %d bytes\n", skb->len - offset);
+	/*
+	 * Update for each skb instead of pdu, because over slow networks a
+	 * data_in's data could take a while to read in. We also want to
+	 * account for r2ts.
+	 */
+	conn->last_recv = jiffies;
 
 	if (unlikely(conn->suspend_rx)) {
 		ISCSI_DBG_TCP(conn, "Rx suspended!\n");
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1105f9a111b..54056984909 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -23,6 +23,13 @@
 
 struct lpfc_sli2_slim;
 
+#define LPFC_PCI_DEV_LP		0x1
+#define LPFC_PCI_DEV_OC		0x2
+
+#define LPFC_SLI_REV2		2
+#define LPFC_SLI_REV3		3
+#define LPFC_SLI_REV4		4
+
 #define LPFC_MAX_TARGET		4096	/* max number of targets supported */
 #define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
 					   requests */
@@ -98,9 +105,11 @@ struct lpfc_dma_pool {
 };
 
 struct hbq_dmabuf {
+	struct lpfc_dmabuf hbuf;
 	struct lpfc_dmabuf dbuf;
 	uint32_t size;
 	uint32_t tag;
+	struct lpfc_rcqe rcqe;
 };
 
 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
@@ -134,7 +143,10 @@ typedef struct lpfc_vpd {
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t rsvd3  :19;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
@@ -152,7 +164,10 @@ typedef struct lpfc_vpd {
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd3  :19;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;
@@ -264,8 +279,8 @@ enum hba_state {
 };
 
 struct lpfc_vport {
-	struct list_head listentry;
 	struct lpfc_hba *phba;
+	struct list_head listentry;
 	uint8_t port_type;
 #define LPFC_PHYSICAL_PORT 1
 #define LPFC_NPIV_PORT  2
@@ -273,6 +288,9 @@ struct lpfc_vport {
 	enum discovery_state port_state;
 
 	uint16_t vpi;
+	uint16_t vfi;
+	uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED	0x1
 
 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
@@ -385,6 +403,9 @@ struct lpfc_vport {
 #endif
 	uint8_t stat_data_enabled;
 	uint8_t stat_data_blocked;
+	struct list_head rcv_buffer_list;
+	uint32_t vport_flag;
+#define STATIC_VPORT	1
 };
 
 struct hbq_s {
@@ -420,8 +441,66 @@ enum intr_type_t {
 };
 
 struct lpfc_hba {
+	/* SCSI interface function jump table entries */
+	int (*lpfc_new_scsi_buf)
+		(struct lpfc_vport *, int);
+	struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+		(struct lpfc_hba *);
+	int (*lpfc_scsi_prep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_scsi_unprep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_release_scsi_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_rampdown_queue_depth)
+		(struct lpfc_hba *);
+	void (*lpfc_scsi_prep_cmnd)
+		(struct lpfc_vport *, struct lpfc_scsi_buf *,
+		 struct lpfc_nodelist *);
+	int (*lpfc_scsi_prep_task_mgmt_cmd)
+		(struct lpfc_vport *, struct lpfc_scsi_buf *,
+		 unsigned int, uint8_t);
+
+	/* IOCB interface function jump table entries */
+	int (*__lpfc_sli_issue_iocb)
+		(struct lpfc_hba *, uint32_t,
+		 struct lpfc_iocbq *, uint32_t);
+	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+			 struct lpfc_iocbq *);
+	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+
+
+	IOCB_t * (*lpfc_get_iocb_from_iocbq)
+		(struct lpfc_iocbq *);
+	void (*lpfc_scsi_cmd_iocb_cmpl)
+		(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+	/* MBOX interface function jump table entries */
+	int (*lpfc_sli_issue_mbox)
+		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+	/* Slow-path IOCB process function jump table entries */
+	void (*lpfc_sli_handle_slow_ring_event)
+		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+		 uint32_t mask);
+	/* INIT device interface function jump table entries */
+	int (*lpfc_sli_hbq_to_firmware)
+		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+	int (*lpfc_sli_brdrestart)
+		(struct lpfc_hba *);
+	int (*lpfc_sli_brdready)
+		(struct lpfc_hba *, uint32_t);
+	void (*lpfc_handle_eratt)
+		(struct lpfc_hba *);
+	void (*lpfc_stop_port)
+		(struct lpfc_hba *);
+
+
+	/* SLI4 specific HBA data structure */
+	struct lpfc_sli4_hba sli4_hba;
+
 	struct lpfc_sli sli;
-	uint32_t sli_rev;		/* SLI2 or SLI3 */
+	uint8_t pci_dev_grp;	/* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+	uint32_t sli_rev;		/* SLI2, SLI3, or SLI4 */
 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
 #define LPFC_SLI3_HBQ_ENABLED		0x01
 #define LPFC_SLI3_NPIV_ENABLED		0x02
@@ -429,6 +508,7 @@ struct lpfc_hba {
 #define LPFC_SLI3_CRP_ENABLED		0x08
 #define LPFC_SLI3_INB_ENABLED		0x10
 #define LPFC_SLI3_BG_ENABLED		0x20
+#define LPFC_SLI3_DSS_ENABLED		0x40
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
@@ -442,8 +522,13 @@ struct lpfc_hba {
 
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT		0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT	0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER	0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT	0x20
+#define ELS_XRI_ABORT_EVENT	0x40
+#define ASYNC_EVENT		0x80
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -502,6 +587,9 @@ struct lpfc_hba {
 	uint32_t cfg_poll;
 	uint32_t cfg_poll_tmo;
 	uint32_t cfg_use_msi;
+	uint32_t cfg_fcp_imax;
+	uint32_t cfg_fcp_wq_count;
+	uint32_t cfg_fcp_eq_count;
 	uint32_t cfg_sg_seg_cnt;
 	uint32_t cfg_prot_sg_seg_cnt;
 	uint32_t cfg_sg_dma_buf_size;
@@ -511,6 +599,8 @@ struct lpfc_hba {
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;
 	uint32_t cfg_enable_bg;
+	uint32_t cfg_enable_fip;
+	uint32_t cfg_log_verbose;
 
 	lpfc_vpd_t vpd;		/* vital product data */
 
@@ -526,11 +616,12 @@ struct lpfc_hba {
 	unsigned long data_flags;
 
 	uint32_t hbq_in_use;		/* HBQs in use flag */
-	struct list_head hbqbuf_in_list;  /* in-fly hbq buffer list */
+	struct list_head rb_pend_list;  /* Received buffers to be processed */
 	uint32_t hbq_count;	        /* Count of configured HBQs */
 	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */
 
 	unsigned long pci_bar0_map;     /* Physical address for PCI BAR0 */
+	unsigned long pci_bar1_map;     /* Physical address for PCI BAR1 */
 	unsigned long pci_bar2_map;     /* Physical address for PCI BAR2 */
 	void __iomem *slim_memmap_p;	/* Kernel memory mapped address for
 					   PCI BAR0 */
@@ -593,7 +684,8 @@ struct lpfc_hba {
 	/* pci_mem_pools */
 	struct pci_pool *lpfc_scsi_dma_buf_pool;
 	struct pci_pool *lpfc_mbuf_pool;
-	struct pci_pool *lpfc_hbq_pool;
+	struct pci_pool *lpfc_hrb_pool;	/* header receive buffer pool */
+	struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
 
 	mempool_t *mbox_mem_pool;
@@ -609,6 +701,14 @@ struct lpfc_hba {
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
 #define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
+	uint16_t max_vports;            /*
+					 * For IOV HBAs max_vpi can change
+					 * after a reset. max_vports is max
+					 * number of vports present. This can
+					 * be greater than max_vpi.
+					 */
+	uint16_t vpi_base;
+	uint16_t vfi_base;
 	unsigned long *vpi_bmask;	/* vpi allocation table */
 
 	/* Data structure used by fabric iocb scheduler */
@@ -667,6 +767,11 @@ struct lpfc_hba {
 /* Maximum number of events that can be outstanding at any time*/
 #define LPFC_MAX_EVT_COUNT 512
 	atomic_t fast_event_count;
+	struct lpfc_fcf fcf;
+	uint8_t fc_map[3];
+	uint8_t valid_vlan;
+	uint16_t vlan_id;
+	struct list_head fcf_conn_rec_list;
 };
 
 static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cbdb12..d73e677201f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -30,8 +30,10 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -505,12 +507,14 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 		return -ENOMEM;
 
 	memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
-	pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
-	pmboxq->mb.mbxOwner = OWN_HOST;
+	pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
+	pmboxq->u.mb.mbxOwner = OWN_HOST;
 
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
 
-	if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+	if ((mbxstatus == MBX_SUCCESS) &&
+	    (pmboxq->u.mb.mbxStatus == 0 ||
+	     pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
 		memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 		lpfc_init_link(phba, pmboxq, phba->cfg_topology,
 			       phba->cfg_link_speed);
@@ -789,7 +793,8 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		  uint32_t *mrpi, uint32_t *arpi,
 		  uint32_t *mvpi, uint32_t *avpi)
 {
-	struct lpfc_sli   *psli = &phba->sli;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mbx_read_config *rd_config;
 	LPFC_MBOXQ_t *pmboxq;
 	MAILBOX_t *pmb;
 	int rc = 0;
@@ -800,7 +805,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
-	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+	    (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
 		return 0;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -811,13 +816,13 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		return 0;
 	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_CONFIG;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
 
 	if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = MBX_NOT_FINISHED;
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -828,18 +833,37 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		return 0;
 	}
 
-	if (mrpi)
-		*mrpi = pmb->un.varRdConfig.max_rpi;
-	if (arpi)
-		*arpi = pmb->un.varRdConfig.avail_rpi;
-	if (mxri)
-		*mxri = pmb->un.varRdConfig.max_xri;
-	if (axri)
-		*axri = pmb->un.varRdConfig.avail_xri;
-	if (mvpi)
-		*mvpi = pmb->un.varRdConfig.max_vpi;
-	if (avpi)
-		*avpi = pmb->un.varRdConfig.avail_vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rd_config = &pmboxq->u.mqe.un.rd_config;
+		if (mrpi)
+			*mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		if (arpi)
+			*arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.rpi_used;
+		if (mxri)
+			*mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		if (axri)
+			*axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.xri_used;
+		if (mvpi)
+			*mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		if (avpi)
+			*avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.vpi_used;
+	} else {
+		if (mrpi)
+			*mrpi = pmb->un.varRdConfig.max_rpi;
+		if (arpi)
+			*arpi = pmb->un.varRdConfig.avail_rpi;
+		if (mxri)
+			*mxri = pmb->un.varRdConfig.max_xri;
+		if (axri)
+			*axri = pmb->un.varRdConfig.avail_xri;
+		if (mvpi)
+			*mvpi = pmb->un.varRdConfig.max_vpi;
+		if (avpi)
+			*avpi = pmb->un.varRdConfig.avail_vpi;
+	}
 
 	mempool_free(pmboxq, phba->mbox_mem_pool);
 	return 1;
@@ -2021,22 +2045,9 @@ static DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
 # lpfc_log_verbose: Only turn this flag on if you are willing to risk being
 # deluged with LOTS of information.
 # You can set a bit mask to record specific types of verbose messages:
-#
-# LOG_ELS                       0x1        ELS events
-# LOG_DISCOVERY                 0x2        Link discovery events
-# LOG_MBOX                      0x4        Mailbox events
-# LOG_INIT                      0x8        Initialization events
-# LOG_LINK_EVENT                0x10       Link events
-# LOG_FCP                       0x40       FCP traffic history
-# LOG_NODE                      0x80       Node table events
-# LOG_BG                        0x200      BlockBuard events
-# LOG_MISC                      0x400      Miscellaneous events
-# LOG_SLI                       0x800      SLI events
-# LOG_FCP_ERROR                 0x1000     Only log FCP errors
-# LOG_LIBDFC                    0x2000     LIBDFC events
-# LOG_ALL_MSG                   0xffff     LOG all messages
+# See lpfc_logmsh.h for definitions.
 */
-LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff,
+LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
 		       "Verbose logging bit-mask");
 
 /*
@@ -2266,6 +2277,36 @@ lpfc_param_init(topology, 0, 0, 6)
 static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
 		lpfc_topology_show, lpfc_topology_store);
 
+/**
+ * lpfc_static_vport_show: Read callback function for
+ *   lpfc_static_vport sysfs file.
+ * @dev: Pointer to class device object.
+ * @attr: device attribute structure.
+ * @buf: Data buffer.
+ *
+ * This function is the read call back function for
+ * lpfc_static_vport sysfs file. The lpfc_static_vport
+ * sysfs file report the mageability of the vport.
+ **/
+static ssize_t
+lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	if (vport->vport_flag & STATIC_VPORT)
+		sprintf(buf, "1\n");
+	else
+		sprintf(buf, "0\n");
+
+	return strlen(buf);
+}
+
+/*
+ * Sysfs attribute to control the statistical data collection.
+ */
+static DEVICE_ATTR(lpfc_static_vport, S_IRUGO,
+		   lpfc_static_vport_show, NULL);
 
 /**
  * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
@@ -2341,7 +2382,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 		if (vports == NULL)
 			return -ENOMEM;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(v_shost->host_lock);
 			/* Block and reset data collection */
@@ -2356,7 +2397,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 		phba->bucket_base = base;
 		phba->bucket_step = step;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 
 			/* Unblock data collection */
@@ -2373,7 +2414,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 		if (vports == NULL)
 			return -ENOMEM;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->stat_data_blocked = 1;
@@ -2844,15 +2885,39 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
 /*
 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
 #		support this feature
-#       0  = MSI disabled
+#       0  = MSI disabled (default)
 #       1  = MSI enabled
-#       2  = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+#       2  = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
 */
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
 /*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+	    "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+	    "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+	    "Set the number of fast-path FCP event queues, if possible");
+
+/*
 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
 #       0  = HBA resets disabled
 #       1  = HBA resets enabled (default)
@@ -2876,6 +2941,14 @@ LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
 */
 LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
 
+/*
+# lpfc_enable_fip: When set, FIP is required to start discovery. If not
+# set, the driver will add an FCF record manually if the port has no
+# FCF records available and start discovery.
+# Value range is [0,1]. Default value is 1 (enabled)
+*/
+LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery");
+
 
 /*
 # lpfc_prot_mask: i
@@ -2942,6 +3015,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_peer_port_login,
 	&dev_attr_lpfc_nodev_tmo,
 	&dev_attr_lpfc_devloss_tmo,
+	&dev_attr_lpfc_enable_fip,
 	&dev_attr_lpfc_fcp_class,
 	&dev_attr_lpfc_use_adisc,
 	&dev_attr_lpfc_ack0,
@@ -2969,6 +3043,9 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_poll,
 	&dev_attr_lpfc_poll_tmo,
 	&dev_attr_lpfc_use_msi,
+	&dev_attr_lpfc_fcp_imax,
+	&dev_attr_lpfc_fcp_wq_count,
+	&dev_attr_lpfc_fcp_eq_count,
 	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
 	&dev_attr_lpfc_soft_wwpn,
@@ -2991,6 +3068,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_lun_queue_depth,
 	&dev_attr_lpfc_nodev_tmo,
 	&dev_attr_lpfc_devloss_tmo,
+	&dev_attr_lpfc_enable_fip,
 	&dev_attr_lpfc_hba_queue_depth,
 	&dev_attr_lpfc_peer_port_login,
 	&dev_attr_lpfc_restrict_login,
@@ -3003,6 +3081,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_enable_da_id,
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
+	&dev_attr_lpfc_static_vport,
 	NULL,
 };
 
@@ -3199,7 +3278,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 		}
 	}
 
-	memcpy((uint8_t *) & phba->sysfs_mbox.mbox->mb + off,
+	memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off,
 	       buf, count);
 
 	phba->sysfs_mbox.offset = off + count;
@@ -3241,6 +3320,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 	int rc;
+	MAILBOX_t *pmb;
 
 	if (off > MAILBOX_CMD_SIZE)
 		return -ERANGE;
@@ -3265,8 +3345,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	if (off == 0 &&
 	    phba->sysfs_mbox.state  == SMBOX_WRITING &&
 	    phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
-
-		switch (phba->sysfs_mbox.mbox->mb.mbxCommand) {
+		pmb = &phba->sysfs_mbox.mbox->u.mb;
+		switch (pmb->mbxCommand) {
 			/* Offline only */
 		case MBX_INIT_LINK:
 		case MBX_DOWN_LINK:
@@ -3283,7 +3363,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 			if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
 				printk(KERN_WARNING "mbox_read:Command 0x%x "
 				       "is illegal in on-line state\n",
-				       phba->sysfs_mbox.mbox->mb.mbxCommand);
+				       pmb->mbxCommand);
 				sysfs_mbox_idle(phba);
 				spin_unlock_irq(&phba->hbalock);
 				return -EPERM;
@@ -3319,13 +3399,13 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		case MBX_CONFIG_PORT:
 		case MBX_RUN_BIU_DIAG:
 			printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n",
-			       phba->sysfs_mbox.mbox->mb.mbxCommand);
+			       pmb->mbxCommand);
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EPERM;
 		default:
 			printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n",
-			       phba->sysfs_mbox.mbox->mb.mbxCommand);
+			       pmb->mbxCommand);
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EPERM;
@@ -3335,14 +3415,14 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		 * or RESTART mailbox commands until the HBA is restarted.
 		 */
 		if (phba->pport->stopped &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN)
+		    pmb->mbxCommand != MBX_DUMP_MEMORY &&
+		    pmb->mbxCommand != MBX_RESTART &&
+		    pmb->mbxCommand != MBX_WRITE_VPARMS &&
+		    pmb->mbxCommand != MBX_WRITE_WWN)
 			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 					"1259 mbox: Issued mailbox cmd "
 					"0x%x while in stopped state.\n",
-					phba->sysfs_mbox.mbox->mb.mbxCommand);
+					pmb->mbxCommand);
 
 		phba->sysfs_mbox.mbox->vport = vport;
 
@@ -3356,7 +3436,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		}
 
 		if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		    (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE))){
+		    (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
 
 			spin_unlock_irq(&phba->hbalock);
 			rc = lpfc_sli_issue_mbox (phba,
@@ -3368,8 +3448,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 			spin_unlock_irq(&phba->hbalock);
 			rc = lpfc_sli_issue_mbox_wait (phba,
 						       phba->sysfs_mbox.mbox,
-				lpfc_mbox_tmo_val(phba,
-				    phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
+				lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
 			spin_lock_irq(&phba->hbalock);
 		}
 
@@ -3391,7 +3470,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		return -EAGAIN;
 	}
 
-	memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
+	memcpy(buf, (uint8_t *) &pmb + off, count);
 
 	phba->sysfs_mbox.offset = off + count;
 
@@ -3585,6 +3664,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 			case LA_8GHZ_LINK:
 				fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
 			break;
+			case LA_10GHZ_LINK:
+				fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+			break;
 			default:
 				fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;
@@ -3652,7 +3734,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
-	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+	    (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
 		return NULL;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -3663,14 +3745,14 @@ lpfc_get_stats(struct Scsi_Host *shost)
 		return NULL;
 	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3695,7 +3777,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3769,7 +3851,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 		return;
 	memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmb->un.varWords[0] = 0x1; /* reset request */
@@ -3777,7 +3859,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3795,7 +3877,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3962,6 +4044,21 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
 		lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
 }
 
+/**
+ * lpfc_hba_log_verbose_init - Set hba's log verbose level
+ * @phba: Pointer to lpfc_hba struct.
+ *
+ * This function is called by the lpfc_get_cfgparam() routine to set the
+ * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
+ * log messsage according to the module's lpfc_log_verbose parameter setting
+ * before hba port or vport created.
+ **/
+static void
+lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
+{
+	phba->cfg_log_verbose = verbose;
+}
+
 struct fc_function_template lpfc_transport_functions = {
 	/* fixed attributes the driver supports */
 	.show_host_node_name = 1,
@@ -4105,6 +4202,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
+	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+	lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
 	lpfc_enable_bg_init(phba, lpfc_enable_bg);
@@ -4113,26 +4213,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	phba->cfg_soft_wwpn = 0L;
 	lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
 	lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
-	/*
-	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
-	 * used to create the sg_dma_buf_pool must be dynamically calculated.
-	 * 2 segments are added since the IOCB needs a command and response bde.
-	 */
-	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
-			sizeof(struct fcp_rsp) +
-			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
-
-	if (phba->cfg_enable_bg) {
-		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
-		phba->cfg_sg_dma_buf_size +=
-			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
-	}
-
-	/* Also reinitialize the host templates with new values. */
-	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-
 	lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
+	lpfc_enable_fip_init(phba, lpfc_enable_fip);
+	lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+
 	return;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f2619..d2a922997c0 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -23,6 +23,8 @@ typedef int (*node_filter)(struct lpfc_nodelist *, void *);
 struct fc_rport;
 void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
 void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
 void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
@@ -35,17 +37,19 @@ int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
-		   LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+		 LPFC_MBOXQ_t *, uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
 void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
 void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
 
 struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
 void lpfc_cleanup_rpis(struct lpfc_vport *, int);
 int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
 void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
@@ -54,6 +58,7 @@ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -105,6 +110,7 @@ int lpfc_issue_els_adisc(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_logo(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_npiv_logo(struct lpfc_vport *, struct lpfc_nodelist *);
 int lpfc_issue_els_scr(struct lpfc_vport *, uint32_t, uint8_t);
+int lpfc_issue_fabric_reglogin(struct lpfc_vport *);
 int lpfc_els_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_ct_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_els_rsp_acc(struct lpfc_vport *, uint32_t, struct lpfc_iocbq *,
@@ -149,15 +155,19 @@ int lpfc_online(struct lpfc_hba *);
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
 void lpfc_offline_prep(struct lpfc_hba *);
 void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
 
 int lpfc_sli_setup(struct lpfc_hba *);
 int lpfc_sli_queue_setup(struct lpfc_hba *);
 
 void lpfc_handle_eratt(struct lpfc_hba *);
 void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
 
 void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +175,32 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
 int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
 
 void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
 	uint32_t , LPFC_MBOXQ_t *);
 struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
 void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+			uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
 
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
 void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
 void lpfc_stop_vport_timers(struct lpfc_vport *);
 
 void lpfc_poll_timeout(unsigned long ptr);
@@ -186,6 +212,7 @@ void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
 void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
 			   uint32_t);
+void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
 void lpfc_reset_barrier(struct lpfc_hba * phba);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
@@ -198,12 +225,13 @@ int lpfc_sli_host_down(struct lpfc_vport *);
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
 int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
 void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +265,7 @@ struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *,
 
 int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
 			     struct lpfc_iocbq *, struct lpfc_iocbq *,
 			     uint32_t);
 void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +282,12 @@ void lpfc_in_buf_free(struct lpfc_hba *, struct lpfc_dmabuf *);
 const char* lpfc_info(struct Scsi_Host *);
 int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
 
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
 void lpfc_get_cfgparam(struct lpfc_hba *);
 void lpfc_get_vport_cfgparam(struct lpfc_vport *);
 int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +348,15 @@ lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *,
 				struct lpfc_iocbq *);
 struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
 void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
 
 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
 #define HBA_EVENT_RSCN                   5
 #define HBA_EVENT_LINK_UP                2
 #define HBA_EVENT_LINK_DOWN              3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 896c7b0351e..1dbccfd3d02 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -32,8 +32,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -267,8 +269,6 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
 	     uint32_t tmo, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli  *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	IOCB_t *icmd;
 	struct lpfc_iocbq *geniocb;
 	int rc;
@@ -331,7 +331,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
 	geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
 	geniocb->vport = vport;
 	geniocb->retry = retry;
-	rc = lpfc_sli_issue_iocb(phba, pring, geniocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, geniocb);
@@ -1578,6 +1578,9 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
 				case LA_8GHZ_LINK:
 					ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
 				break;
+				case LA_10GHZ_LINK:
+					ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+				break;
 				default:
 					ae->un.PortSpeed =
 						HBA_PORTSPEED_UNKNOWN;
@@ -1730,7 +1733,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 	uint8_t *fwname;
 
 	if (vp->rev.rBit) {
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			rev = vp->rev.sli2FwRev;
 		else
 			rev = vp->rev.sli1FwRev;
@@ -1756,7 +1759,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 		}
 		b4 = (rev & 0x0000000f);
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			fwname = vp->rev.sli2FwName;
 		else
 			fwname = vp->rev.sli1FwName;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 52be5644e07..2b02b1fb39a 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2007-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -33,8 +33,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -280,6 +282,8 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size)
 	struct lpfc_dmabuf *d_buf;
 	struct hbq_dmabuf *hbq_buf;
 
+	if (phba->sli_rev != 3)
+		return 0;
 	cnt = LPFC_HBQINFO_SIZE;
 	spin_lock_irq(&phba->hbalock);
 
@@ -489,12 +493,15 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
 				 pring->next_cmdidx, pring->local_getidx,
 				 pring->flag, pgpp->rspPutInx, pring->numRiocb);
 	}
-	word0 = readl(phba->HAregaddr);
-	word1 = readl(phba->CAregaddr);
-	word2 = readl(phba->HSregaddr);
-	word3 = readl(phba->HCregaddr);
-	len +=  snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x HC:%08x\n",
-	word0, word1, word2, word3);
+
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		word0 = readl(phba->HAregaddr);
+		word1 = readl(phba->CAregaddr);
+		word2 = readl(phba->HSregaddr);
+		word3 = readl(phba->HCregaddr);
+		len +=  snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
+				 "HC:%08x\n", word0, word1, word2, word3);
+	}
 	spin_unlock_irq(&phba->hbalock);
 	return len;
 }
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index ffd10897207..1142070e948 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -135,6 +135,7 @@ struct lpfc_nodelist {
 #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */
 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
 #define NLP_SC_REQ         0x20000000	/* Target requires authentication */
+#define NLP_RPI_VALID      0x80000000	/* nlp_rpi is valid */
 
 /* ndlp usage management macros */
 #define NLP_CHK_NODE_ACT(ndlp)		(((ndlp)->nlp_usg_map \
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b8b34cf5c3d..6bdeb14878a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -84,7 +86,8 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
 	uint32_t ha_copy;
 
 	if (vport->port_state >= LPFC_VPORT_READY ||
-	    phba->link_state == LPFC_LINK_DOWN)
+	    phba->link_state == LPFC_LINK_DOWN ||
+	    phba->sli_rev > LPFC_SLI_REV3)
 		return 0;
 
 	/* Read the HBA Host Attention Register */
@@ -219,7 +222,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
 		icmd->un.elsreq64.myID = vport->fc_myDID;
 
 		/* For ELS_REQUEST64_CR, use the VPI by default */
-		icmd->ulpContext = vport->vpi;
+		icmd->ulpContext = vport->vpi + phba->vpi_base;
 		icmd->ulpCt_h = 0;
 		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
 		if (elscmd == ELS_CMD_ECHO)
@@ -305,7 +308,7 @@ els_iocb_free_pcmb_exit:
  *   0 - successfully issued fabric registration login for @vport
  *   -ENXIO -- failed to issue fabric registration login for @vport
  **/
-static int
+int
 lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
 {
 	struct lpfc_hba  *phba = vport->phba;
@@ -345,8 +348,7 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
 		err = 4;
 		goto fail;
 	}
-	rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
-			    0);
+	rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
 	if (rc) {
 		err = 5;
 		goto fail_free_mbox;
@@ -386,6 +388,75 @@ fail:
 }
 
 /**
+ * lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
+ * the @vport. This mailbox command is necessary for FCoE only.
+ *
+ * Return code
+ *   0 - successfully issued REG_VFI for @vport
+ *   A failure code otherwise.
+ **/
+static int
+lpfc_issue_reg_vfi(struct lpfc_vport *vport)
+{
+	struct lpfc_hba  *phba = vport->phba;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_nodelist *ndlp;
+	struct serv_parm *sp;
+	struct lpfc_dmabuf *dmabuf;
+	int rc = 0;
+
+	sp = &phba->fc_fabparam;
+	ndlp = lpfc_findnode_did(vport, Fabric_DID);
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+		rc = -ENODEV;
+		goto fail;
+	}
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+	dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+	if (!dmabuf->virt) {
+		rc = -ENOMEM;
+		goto fail_free_dmabuf;
+	}
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		rc = -ENOMEM;
+		goto fail_free_coherent;
+	}
+	vport->port_state = LPFC_FABRIC_CFG_LINK;
+	memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
+	lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
+	mboxq->vport = vport;
+	mboxq->context1 = dmabuf;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		rc = -ENXIO;
+		goto fail_free_mbox;
+	}
+	return 0;
+
+fail_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+fail_free_coherent:
+	lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+fail_free_dmabuf:
+	kfree(dmabuf);
+fail:
+	lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+		"0289 Issue Register VFI failed: Err %d\n", rc);
+	return rc;
+}
+
+/**
  * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -497,17 +568,24 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		}
 	}
 
-	lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
-
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
-	    vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) {
-		lpfc_register_new_vport(phba, vport, ndlp);
-		return 0;
+	if (phba->sli_rev < LPFC_SLI_REV4) {
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
+		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
+		    vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+			lpfc_register_new_vport(phba, vport, ndlp);
+		else
+			lpfc_issue_fabric_reglogin(vport);
+	} else {
+		ndlp->nlp_type |= NLP_FABRIC;
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+		if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+			lpfc_start_fdiscs(phba);
+			lpfc_do_scr_ns_plogi(phba, vport);
+		} else
+			lpfc_issue_reg_vfi(vport);
 	}
-	lpfc_issue_fabric_reglogin(vport);
 	return 0;
 }
-
 /**
  * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
  * @vport: pointer to a host virtual N_Port data structure.
@@ -815,9 +893,14 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (sp->cmn.fcphHigh < FC_PH3)
 		sp->cmn.fcphHigh = FC_PH3;
 
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+	if  (phba->sli_rev == LPFC_SLI_REV4) {
+		elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+		elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+		/* FLOGI needs to be 3 for WQE FCFI */
+		/* Set the fcfi to the fcfi we registered with */
+		elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+	} else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 		sp->cmn.request_multiple_Nport = 1;
-
 		/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
 		icmd->ulpCt_h = 1;
 		icmd->ulpCt_l = 0;
@@ -930,6 +1013,8 @@ lpfc_initial_flogi(struct lpfc_vport *vport)
 		if (!ndlp)
 			return 0;
 		lpfc_nlp_init(vport, ndlp, Fabric_DID);
+		/* Set the node type */
+		ndlp->nlp_type |= NLP_FABRIC;
 		/* Put ndlp onto node list */
 		lpfc_enqueue_node(vport, ndlp);
 	} else if (!NLP_CHK_NODE_ACT(ndlp)) {
@@ -1350,14 +1435,12 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 	IOCB_t *icmd;
 	struct lpfc_nodelist *ndlp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int ret;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	ndlp = lpfc_findnode_did(vport, did);
 	if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
@@ -1391,7 +1474,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 
 	phba->fc_stat.elsXmitPLOGI++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
-	ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (ret == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -1501,14 +1584,9 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	PRLI *npr;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 
-	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
-
 	cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
 	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_PRLI);
@@ -1550,7 +1628,8 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_PRLI_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_PRLI_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -1608,7 +1687,8 @@ lpfc_adisc_done(struct lpfc_vport *vport)
 	 * and continue discovery.
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
@@ -1788,8 +1868,6 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	ADISC *ap;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 
@@ -1822,7 +1900,8 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_ADISC_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_ADISC_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -1937,15 +2016,10 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];
-
 	spin_lock_irq(shost->host_lock);
 	if (ndlp->nlp_flag & NLP_LOGO_SND) {
 		spin_unlock_irq(shost->host_lock);
@@ -1978,7 +2052,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(shost->host_lock);
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
@@ -2058,14 +2132,12 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	struct lpfc_nodelist *ndlp;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	cmdsize = (sizeof(uint32_t) + sizeof(SCR));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2108,7 +2180,8 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 
 	phba->fc_stat.elsXmitSCR++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
 		 * lpfc_els_free_iocb routine to trigger the rlease of
 		 * the node.
@@ -2152,7 +2225,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	FARP *fp;
 	uint8_t *pcmd;
@@ -2162,7 +2234,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_nodelist *ndlp;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	cmdsize = (sizeof(uint32_t) + sizeof(FARP));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2219,7 +2290,8 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 
 	phba->fc_stat.elsXmitFARPR++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
 		 * lpfc_els_free_iocb routine to trigger the release of
 		 * the node.
@@ -2949,6 +3021,14 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 
+	/*
+	 * This routine is used to register and unregister in previous SLI
+	 * modes.
+	 */
+	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+	    (phba->sli_rev == LPFC_SLI_REV4))
+		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
 	pmb->context1 = NULL;
 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
 	kfree(mp);
@@ -2961,6 +3041,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		 */
 		lpfc_nlp_not_used(ndlp);
 	}
+
 	return;
 }
 
@@ -3170,7 +3251,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -3178,7 +3258,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	ELS_PKT *els_pkt_ptr;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	oldcmd = &oldiocb->iocb;
 
 	switch (flag) {
@@ -3266,7 +3345,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	}
 
 	phba->fc_stat.elsXmitACC++;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3305,15 +3384,12 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
-
 	cmdsize = 2 * sizeof(uint32_t);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -3346,7 +3422,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 
 	phba->fc_stat.elsXmitLSRJT++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -3379,8 +3455,6 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 		       struct lpfc_nodelist *ndlp)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli  *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	ADISC *ap;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
@@ -3422,7 +3496,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3459,14 +3533,12 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	cmdsize = sizeof(uint32_t) + sizeof(PRLI);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -3520,7 +3592,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3562,15 +3634,12 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 	RNID *rn;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];
-
 	cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
 					+ (2 * sizeof(struct lpfc_name));
 	if (format)
@@ -3626,7 +3695,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 	elsiocb->context1 = NULL;  /* Don't need ndlp for cmpl,
 				    * it could be freed */
 
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3839,7 +3908,9 @@ lpfc_rscn_payload_check(struct lpfc_vport *vport, uint32_t did)
 			payload_len -= sizeof(uint32_t);
 			switch (rscn_did.un.b.resv & RSCN_ADDRESS_FORMAT_MASK) {
 			case RSCN_ADDRESS_FORMAT_PORT:
-				if (ns_did.un.word == rscn_did.un.word)
+				if ((ns_did.un.b.domain == rscn_did.un.b.domain)
+				    && (ns_did.un.b.area == rscn_did.un.b.area)
+				    && (ns_did.un.b.id == rscn_did.un.b.id))
 					goto return_did_out;
 				break;
 			case RSCN_ADDRESS_FORMAT_AREA:
@@ -4300,7 +4371,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 			lpfc_init_link(phba, mbox,
 				       phba->cfg_topology,
 				       phba->cfg_link_speed);
-			mbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+			mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
 			mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 			mbox->vport = vport;
 			rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
@@ -4440,8 +4511,6 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 static void
 lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	MAILBOX_t *mb;
 	IOCB_t *icmd;
 	RPS_RSP *rps_rsp;
@@ -4451,7 +4520,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	uint16_t xri, status;
 	uint32_t cmdsize;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	xri = (uint16_t) ((unsigned long)(pmb->context1));
@@ -4507,7 +4576,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 			 ndlp->nlp_rpi);
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
 		lpfc_els_free_iocb(phba, elsiocb);
 	return;
 }
@@ -4616,8 +4685,6 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
 	IOCB_t *icmd, *oldcmd;
 	RPL_RSP rpl_rsp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	uint8_t *pcmd;
 
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -4654,7 +4721,8 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
 			 ndlp->nlp_rpi);
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
 	}
@@ -4883,7 +4951,10 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		} else {
 			/* FAN verified - skip FLOGI */
 			vport->fc_myDID = vport->fc_prevDID;
-			lpfc_issue_fabric_reglogin(vport);
+			if (phba->sli_rev < LPFC_SLI_REV4)
+				lpfc_issue_fabric_reglogin(vport);
+			else
+				lpfc_issue_reg_vfi(vport);
 		}
 	}
 	return 0;
@@ -5566,11 +5637,10 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 
 dropit:
 	if (vport && !(vport->load_flag & FC_UNLOADING))
-		lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
-			"(%d):0111 Dropping received ELS cmd "
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+			"0111 Dropping received ELS cmd "
 			"Data: x%x x%x x%x\n",
-			vport->vpi, icmd->ulpStatus,
-			icmd->un.ulpWord[4], icmd->ulpTimeout);
+			icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout);
 	phba->fc_stat.elsRcvDrop++;
 }
 
@@ -5646,10 +5716,9 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	     icmd->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
 		if (icmd->unsli3.rcvsli3.vpi == 0xffff)
 			vport = phba->pport;
-		else {
-			uint16_t vpi = icmd->unsli3.rcvsli3.vpi;
-			vport = lpfc_find_vport_by_vpid(phba, vpi);
-		}
+		else
+			vport = lpfc_find_vport_by_vpid(phba,
+				icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
 	}
 	/* If there are no BDEs associated
 	 * with this IOCB, there is nothing to do.
@@ -5781,7 +5850,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	spin_lock_irq(shost->host_lock);
 	vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
@@ -5818,7 +5887,10 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	} else {
 		if (vport == phba->pport)
-			lpfc_issue_fabric_reglogin(vport);
+			if (phba->sli_rev < LPFC_SLI_REV4)
+				lpfc_issue_fabric_reglogin(vport);
+			else
+				lpfc_issue_reg_vfi(vport);
 		else
 			lpfc_do_scr_ns_plogi(phba, vport);
 	}
@@ -5850,7 +5922,7 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport,
 
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (mbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, mbox);
+		lpfc_reg_vpi(vport, mbox);
 		mbox->vport = vport;
 		mbox->context2 = lpfc_nlp_get(ndlp);
 		mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport;
@@ -6139,7 +6211,6 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
@@ -6169,7 +6240,8 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_LOGO_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -6224,7 +6296,6 @@ lpfc_resume_fabric_iocbs(struct lpfc_hba *phba)
 	struct lpfc_iocbq *iocb;
 	unsigned long iflags;
 	int ret;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	IOCB_t *cmd;
 
 repeat:
@@ -6248,7 +6319,7 @@ repeat:
 			"Fabric sched1:   ste:x%x",
 			iocb->vport->port_state, 0, 0);
 
-		ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
 			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6394,7 +6465,6 @@ static int
 lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
 {
 	unsigned long iflags;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	int ready;
 	int ret;
 
@@ -6418,7 +6488,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
 			"Fabric sched2:   ste:x%x",
 			iocb->vport->port_state, 0, 0);
 
-		ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
 			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6524,3 +6594,38 @@ void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
 	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
 			      IOERR_SLI_ABORTED);
 }
+
+/**
+ * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the els xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 slow-path
+ * ELS aborted xri.
+ **/
+void
+lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+			&phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+		if (sglq_entry->sli4_xritag == xri) {
+			list_del(&sglq_entry->list);
+			spin_unlock_irqrestore(
+					&phba->sli4_hba.abts_sgl_list_lock,
+					 iflag);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+
+			list_add_tail(&sglq_entry->list,
+				&phba->sli4_hba.lpfc_sgl_list);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e764ce0bf70..35c41ae75be 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -29,10 +29,12 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_scsi.h"
 #include "lpfc.h"
 #include "lpfc_logmsg.h"
@@ -273,6 +275,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
 	    !(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
 	    (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))
 		lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
+
+	lpfc_unregister_unused_fcf(phba);
 }
 
 /**
@@ -295,10 +299,11 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
 
 	ret = kzalloc(sizeof(struct lpfc_fast_path_event),
 			GFP_ATOMIC);
-	if (ret)
+	if (ret) {
 		atomic_inc(&phba->fast_event_count);
-	INIT_LIST_HEAD(&ret->work_evt.evt_listp);
-	ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+		INIT_LIST_HEAD(&ret->work_evt.evt_listp);
+		ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+	}
 	return ret;
 }
 
@@ -491,6 +496,10 @@ lpfc_work_done(struct lpfc_hba *phba)
 	phba->work_ha = 0;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* First, try to post the next mailbox command to SLI4 device */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+		lpfc_sli4_post_async_mbox(phba);
+
 	if (ha_copy & HA_ERATT)
 		/* Handle the error attention event */
 		lpfc_handle_eratt(phba);
@@ -501,9 +510,27 @@ lpfc_work_done(struct lpfc_hba *phba)
 	if (ha_copy & HA_LATT)
 		lpfc_handle_latt(phba);
 
+	/* Process SLI4 events */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+		if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+			lpfc_sli4_fcp_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+			lpfc_sli4_els_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ASYNC_EVENT)
+			lpfc_sli4_async_event_proc(phba);
+		if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+		}
+		if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+			lpfc_sli4_handle_received_buffer(phba);
+	}
+
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi; i++) {
+		for (i = 0; i <= phba->max_vports; i++) {
 			/*
 			 * We could have no vports in array if unloading, so if
 			 * this happens then just use the pport
@@ -555,23 +582,24 @@ lpfc_work_done(struct lpfc_hba *phba)
 		/*
 		 * Turn on Ring interrupts
 		 */
-		spin_lock_irq(&phba->hbalock);
-		control = readl(phba->HCregaddr);
-		if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
-			lpfc_debugfs_slow_ring_trc(phba,
-				"WRK Enable ring: cntl:x%x hacopy:x%x",
-				control, ha_copy, 0);
-
-			control |= (HC_R0INT_ENA << LPFC_ELS_RING);
-			writel(control, phba->HCregaddr);
-			readl(phba->HCregaddr); /* flush */
-		}
-		else {
-			lpfc_debugfs_slow_ring_trc(phba,
-				"WRK Ring ok:     cntl:x%x hacopy:x%x",
-				control, ha_copy, 0);
+		if (phba->sli_rev <= LPFC_SLI_REV3) {
+			spin_lock_irq(&phba->hbalock);
+			control = readl(phba->HCregaddr);
+			if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
+				lpfc_debugfs_slow_ring_trc(phba,
+					"WRK Enable ring: cntl:x%x hacopy:x%x",
+					control, ha_copy, 0);
+
+				control |= (HC_R0INT_ENA << LPFC_ELS_RING);
+				writel(control, phba->HCregaddr);
+				readl(phba->HCregaddr); /* flush */
+			} else {
+				lpfc_debugfs_slow_ring_trc(phba,
+					"WRK Ring ok:     cntl:x%x hacopy:x%x",
+					control, ha_copy, 0);
+			}
+			spin_unlock_irq(&phba->hbalock);
 		}
-		spin_unlock_irq(&phba->hbalock);
 	}
 	lpfc_work_list_done(phba);
 }
@@ -689,7 +717,7 @@ lpfc_port_link_failure(struct lpfc_vport *vport)
 	lpfc_can_disctmo(vport);
 }
 
-static void
+void
 lpfc_linkdown_port(struct lpfc_vport *vport)
 {
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
@@ -716,6 +744,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
 	if (phba->link_state == LPFC_LINK_DOWN)
 		return 0;
 	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
 	if (phba->link_state > LPFC_LINK_DOWN) {
 		phba->link_state = LPFC_LINK_DOWN;
 		phba->pport->fc_flag &= ~FC_LBIT;
@@ -723,7 +752,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			/* Issue a LINK DOWN event to all nodes */
 			lpfc_linkdown_port(vports[i]);
 		}
@@ -833,10 +862,11 @@ lpfc_linkup(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_linkup_port(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+	    (phba->sli_rev < LPFC_SLI_REV4))
 		lpfc_issue_clear_la(phba, phba->pport);
 
 	return 0;
@@ -854,7 +884,7 @@ lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_sli   *psli = &phba->sli;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t control;
 
 	/* Since we don't do discovery right now, turn these off here */
@@ -917,7 +947,7 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
 
-	if (pmb->mb.mbxStatus)
+	if (pmb->u.mb.mbxStatus)
 		goto out;
 
 	mempool_free(pmb, phba->mbox_mem_pool);
@@ -945,7 +975,7 @@ out:
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
 			 "0306 CONFIG_LINK mbxStatus error x%x "
 			 "HBA state x%x\n",
-			 pmb->mb.mbxStatus, vport->port_state);
+			 pmb->u.mb.mbxStatus, vport->port_state);
 	mempool_free(pmb, phba->mbox_mem_pool);
 
 	lpfc_linkdown(phba);
@@ -959,9 +989,592 @@ out:
 }
 
 static void
+lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+	unsigned long flags;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+			 "2017 REG_FCFI mbxStatus error x%x "
+			 "HBA state x%x\n",
+			 mboxq->u.mb.mbxStatus, vport->port_state);
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* Start FCoE discovery by sending a FLOGI. */
+	phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
+	/* Set the FCFI registered flag */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	phba->fcf.fcf_flag |= FCF_REGISTERED;
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	if (vport->port_state != LPFC_FLOGI) {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		lpfc_initial_flogi(vport);
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_fab_name_match - Check if the fcf fabric name match.
+ * @fab_name: pointer to fabric name.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's fabric name with provided
+ * fabric name. If the fabric name are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
+{
+	if ((fab_name[0] ==
+		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) &&
+	    (fab_name[1] ==
+		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) &&
+	    (fab_name[2] ==
+		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) &&
+	    (fab_name[3] ==
+		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) &&
+	    (fab_name[4] ==
+		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) &&
+	    (fab_name[5] ==
+		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) &&
+	    (fab_name[6] ==
+		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) &&
+	    (fab_name[7] ==
+		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_mac_addr_match - Check if the fcf mac address match.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's mac address with HBA's
+ * FCF mac address. If the mac addresses are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_mac_addr_match(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+	if ((phba->fcf.mac_addr[0] ==
+		bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[1] ==
+		bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[2] ==
+		bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[3] ==
+		bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[4] ==
+		bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[5] ==
+		bf_get(lpfc_fcf_record_mac_5, new_fcf_record)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine copies the FCF information from the FCF
+ * record to lpfc_hba data structure.
+ **/
+static void
+lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+	phba->fcf.fabric_name[0] =
+		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
+	phba->fcf.fabric_name[1] =
+		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
+	phba->fcf.fabric_name[2] =
+		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
+	phba->fcf.fabric_name[3] =
+		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
+	phba->fcf.fabric_name[4] =
+		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
+	phba->fcf.fabric_name[5] =
+		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
+	phba->fcf.fabric_name[6] =
+		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
+	phba->fcf.fabric_name[7] =
+		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
+	phba->fcf.mac_addr[0] =
+		bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
+	phba->fcf.mac_addr[1] =
+		bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
+	phba->fcf.mac_addr[2] =
+		bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
+	phba->fcf.mac_addr[3] =
+		bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
+	phba->fcf.mac_addr[4] =
+		bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
+	phba->fcf.mac_addr[5] =
+		bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
+	phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+	phba->fcf.priority = new_fcf_record->fip_priority;
+}
+
+/**
+ * lpfc_register_fcf - Register the FCF with hba.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issues a register fcfi mailbox command to register
+ * the fcf with HBA.
+ **/
+static void
+lpfc_register_fcf(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *fcf_mbxq;
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+
+	/* If the FCF is not availabe do nothing. */
+	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		return;
+	}
+
+	/* The FCF is already registered, start discovery */
+	if (phba->fcf.fcf_flag & FCF_REGISTERED) {
+		phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		if (phba->pport->port_state != LPFC_FLOGI)
+			lpfc_initial_flogi(phba->pport);
+		return;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	fcf_mbxq = mempool_alloc(phba->mbox_mem_pool,
+		GFP_KERNEL);
+	if (!fcf_mbxq)
+		return;
+
+	lpfc_reg_fcfi(phba, fcf_mbxq);
+	fcf_mbxq->vport = phba->pport;
+	fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
+	rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		mempool_free(fcf_mbxq, phba->mbox_mem_pool);
+
+	return;
+}
+
+/**
+ * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ * @boot_flag: Indicates if this record used by boot bios.
+ * @addr_mode: The address mode to be used by this FCF
+ *
+ * This routine compare the fcf record with connect list obtained from the
+ * config region to decide if this FCF can be used for SAN discovery. It returns
+ * 1 if this record can be used for SAN discovery else return zero. If this FCF
+ * record can be used for SAN discovery, the boot_flag will indicate if this FCF
+ * is used by boot bios and addr_mode will indicate the addressing mode to be
+ * used for this FCF when the function returns.
+ * If the FCF record need to be used with a particular vlan id, the vlan is
+ * set in the vlan_id on return of the function. If not VLAN tagging need to
+ * be used with the FCF vlan_id will be set to 0xFFFF;
+ **/
+static int
+lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
+			struct fcf_record *new_fcf_record,
+			uint32_t *boot_flag, uint32_t *addr_mode,
+			uint16_t *vlan_id)
+{
+	struct lpfc_fcf_conn_entry *conn_entry;
+
+	if (!phba->cfg_enable_fip) {
+		*boot_flag = 0;
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record);
+		if (phba->valid_vlan)
+			*vlan_id = phba->vlan_id;
+		else
+			*vlan_id = 0xFFFF;
+		return 1;
+	}
+
+	/*
+	 * If there are no FCF connection table entry, driver connect to all
+	 * FCFs.
+	 */
+	if (list_empty(&phba->fcf_conn_rec_list)) {
+		*boot_flag = 0;
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+			new_fcf_record);
+		*vlan_id = 0xFFFF;
+		return 1;
+	}
+
+	list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, list) {
+		if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
+			continue;
+
+		if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
+			!lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
+				new_fcf_record))
+			continue;
+
+		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
+			/*
+			 * If the vlan bit map does not have the bit set for the
+			 * vlan id to be used, then it is not a match.
+			 */
+			if (!(new_fcf_record->vlan_bitmap
+				[conn_entry->conn_rec.vlan_tag / 8] &
+				(1 << (conn_entry->conn_rec.vlan_tag % 8))))
+				continue;
+		}
+
+		/*
+		 * Check if the connection record specifies a required
+		 * addressing mode.
+		 */
+		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
+
+			/*
+			 * If SPMA required but FCF not support this continue.
+			 */
+			if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+				!(bf_get(lpfc_fcf_record_mac_addr_prov,
+					new_fcf_record) & LPFC_FCF_SPMA))
+				continue;
+
+			/*
+			 * If FPMA required but FCF not support this continue.
+			 */
+			if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+				!(bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record) & LPFC_FCF_FPMA))
+				continue;
+		}
+
+		/*
+		 * This fcf record matches filtering criteria.
+		 */
+		if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
+			*boot_flag = 1;
+		else
+			*boot_flag = 0;
+
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record);
+		/*
+		 * If the user specified a required address mode, assign that
+		 * address mode
+		 */
+		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
+			*addr_mode = (conn_entry->conn_rec.flags &
+				FCFCNCT_AM_SPMA) ?
+				LPFC_FCF_SPMA : LPFC_FCF_FPMA;
+		/*
+		 * If the user specified a prefered address mode, use the
+		 * addr mode only if FCF support the addr_mode.
+		 */
+		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+			(*addr_mode & LPFC_FCF_SPMA))
+				*addr_mode = LPFC_FCF_SPMA;
+		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+			!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+			(*addr_mode & LPFC_FCF_FPMA))
+				*addr_mode = LPFC_FCF_FPMA;
+		/*
+		 * If user did not specify any addressing mode, use FPMA if
+		 * possible else use SPMA.
+		 */
+		else if (*addr_mode & LPFC_FCF_FPMA)
+			*addr_mode = LPFC_FCF_FPMA;
+
+		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
+			*vlan_id = conn_entry->conn_rec.vlan_tag;
+		else
+			*vlan_id = 0xFFFF;
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This function iterate through all the fcf records available in
+ * HBA and choose the optimal FCF record for discovery. After finding
+ * the FCF for discovery it register the FCF record and kick start
+ * discovery.
+ * If FCF_IN_USE flag is set in currently used FCF, the routine try to
+ * use a FCF record which match fabric name and mac address of the
+ * currently used FCF record.
+ * If the driver support only one FCF, it will try to use the FCF record
+ * used by BOOT_BIOS.
+ */
+void
+lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	struct fcf_record *new_fcf_record;
+	int rc;
+	uint32_t boot_flag, addr_mode;
+	uint32_t next_fcf_index;
+	unsigned long flags;
+	uint16_t vlan_id;
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2524 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		goto out;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+
+	shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &shdr->response);
+	/*
+	 * The FCF Record was read and there is no reason for the driver
+	 * to maintain the FCF record data or memory. Instead, just need
+	 * to book keeping the FCFIs can be used.
+	 */
+	if (shdr_status || shdr_add_status) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2521 READ_FCF_RECORD mailbox failed "
+				"with status x%x add_status x%x, mbx\n",
+				shdr_status, shdr_add_status);
+		goto out;
+	}
+	/* Interpreting the returned information of FCF records */
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+	lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
+			      sizeof(struct lpfc_mbx_read_fcf_tbl));
+	next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
+
+	new_fcf_record = (struct fcf_record *)(virt_addr +
+			  sizeof(struct lpfc_mbx_read_fcf_tbl));
+	lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
+			      sizeof(struct fcf_record));
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+
+	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record,
+				      &boot_flag, &addr_mode,
+					&vlan_id);
+	/*
+	 * If the fcf record does not match with connect list entries
+	 * read the next entry.
+	 */
+	if (!rc)
+		goto read_next_fcf;
+	/*
+	 * If this is not the first FCF discovery of the HBA, use last
+	 * FCF record for the discovery.
+	 */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	if (phba->fcf.fcf_flag & FCF_IN_USE) {
+		if (lpfc_fab_name_match(phba->fcf.fabric_name,
+			new_fcf_record) &&
+		    lpfc_mac_addr_match(phba, new_fcf_record)) {
+			phba->fcf.fcf_flag |= FCF_AVAILABLE;
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto out;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto read_next_fcf;
+	}
+	if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
+		/*
+		 * If the current FCF record does not have boot flag
+		 * set and new fcf record has boot flag set, use the
+		 * new fcf record.
+		 */
+		if (boot_flag && !(phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+			/* Use this FCF record */
+			lpfc_copy_fcf_record(phba, new_fcf_record);
+			phba->fcf.addr_mode = addr_mode;
+			phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+			if (vlan_id != 0xFFFF) {
+				phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+				phba->fcf.vlan_id = vlan_id;
+			}
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		/*
+		 * If the current FCF record has boot flag set and the
+		 * new FCF record does not have boot flag, read the next
+		 * FCF record.
+		 */
+		if (!boot_flag && (phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		/*
+		 * If there is a record with lower priority value for
+		 * the current FCF, use that record.
+		 */
+		if (lpfc_fab_name_match(phba->fcf.fabric_name, new_fcf_record)
+			&& (new_fcf_record->fip_priority <
+				phba->fcf.priority)) {
+			/* Use this FCF record */
+			lpfc_copy_fcf_record(phba, new_fcf_record);
+			phba->fcf.addr_mode = addr_mode;
+			if (vlan_id != 0xFFFF) {
+				phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+				phba->fcf.vlan_id = vlan_id;
+			}
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto read_next_fcf;
+	}
+	/*
+	 * This is the first available FCF record, use this
+	 * record.
+	 */
+	lpfc_copy_fcf_record(phba, new_fcf_record);
+	phba->fcf.addr_mode = addr_mode;
+	if (boot_flag)
+		phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+	phba->fcf.fcf_flag |= FCF_AVAILABLE;
+	if (vlan_id != 0xFFFF) {
+		phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+		phba->fcf.vlan_id = vlan_id;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	goto read_next_fcf;
+
+read_next_fcf:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0)
+		lpfc_register_fcf(phba);
+	else
+		lpfc_sli4_read_fcf_record(phba, next_fcf_index);
+	return;
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	lpfc_register_fcf(phba);
+
+	return;
+}
+
+/**
+ * lpfc_start_fdiscs - send fdiscs for each vports on this port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function loops through the list of vports on the @phba and issues an
+ * FDISC if possible.
+ */
+void
+lpfc_start_fdiscs(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
+				continue;
+			/* There are no vpi for this vport */
+			if (vports[i]->vpi > phba->max_vpi) {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_FAILED);
+				continue;
+			}
+			if (phba->fc_topology == TOPOLOGY_LOOP) {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_LINKDOWN);
+				continue;
+			}
+			if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
+				lpfc_initial_fdisc(vports[i]);
+			else {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_NO_FABRIC_SUPP);
+				lpfc_printf_vlog(vports[i], KERN_ERR,
+						 LOG_ELS,
+						 "0259 No NPIV "
+						 "Fabric support\n");
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+}
+
+void
+lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *dmabuf = mboxq->context1;
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+			 "2018 REG_VFI mbxStatus error x%x "
+			 "HBA state x%x\n",
+			 mboxq->u.mb.mbxStatus, vport->port_state);
+		if (phba->fc_topology == TOPOLOGY_LOOP) {
+			/* FLOGI failed, use loop map to make discovery list */
+			lpfc_disc_list_loopmap(vport);
+			/* Start discovery */
+			lpfc_disc_start(vport);
+			goto fail_free_mem;
+		}
+		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+		goto fail_free_mem;
+	}
+	/* Mark the vport has registered with its VFI */
+	vport->vfi_state |= LPFC_VFI_REGISTERED;
+
+	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
+		lpfc_start_fdiscs(phba);
+		lpfc_do_scr_ns_plogi(phba, vport);
+	}
+
+fail_free_mem:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return;
+}
+
+static void
 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
 	struct lpfc_vport  *vport = pmb->vport;
 
@@ -1012,13 +1625,13 @@ static void
 lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 {
 	struct lpfc_vport *vport = phba->pport;
-	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox;
+	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
 	int i;
 	struct lpfc_dmabuf *mp;
 	int rc;
+	struct fcf_record *fcf_record;
 
 	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-	cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 
 	spin_lock_irq(&phba->hbalock);
 	switch (la->UlnkSpeed) {
@@ -1034,6 +1647,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 	case LA_8GHZ_LINK:
 		phba->fc_linkspeed = LA_8GHZ_LINK;
 		break;
+	case LA_10GHZ_LINK:
+		phba->fc_linkspeed = LA_10GHZ_LINK;
+		break;
 	default:
 		phba->fc_linkspeed = LA_UNKNW_LINK;
 		break;
@@ -1115,22 +1731,66 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
 			kfree(mp);
 			mempool_free(sparam_mbox, phba->mbox_mem_pool);
-			if (cfglink_mbox)
-				mempool_free(cfglink_mbox, phba->mbox_mem_pool);
 			goto out;
 		}
 	}
 
-	if (cfglink_mbox) {
+	if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+		if (!cfglink_mbox)
+			goto out;
 		vport->port_state = LPFC_LOCAL_CFG_LINK;
 		lpfc_config_link(phba, cfglink_mbox);
 		cfglink_mbox->vport = vport;
 		cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
 		rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
-		if (rc != MBX_NOT_FINISHED)
-			return;
-		mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+		if (rc == MBX_NOT_FINISHED) {
+			mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+			goto out;
+		}
+	} else {
+		/*
+		 * Add the driver's default FCF record at FCF index 0 now. This
+		 * is phase 1 implementation that support FCF index 0 and driver
+		 * defaults.
+		 */
+		if (phba->cfg_enable_fip == 0) {
+			fcf_record = kzalloc(sizeof(struct fcf_record),
+					GFP_KERNEL);
+			if (unlikely(!fcf_record)) {
+				lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_SLI,
+					"2554 Could not allocate memmory for "
+					"fcf record\n");
+				rc = -ENODEV;
+				goto out;
+			}
+
+			lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
+						LPFC_FCOE_FCF_DEF_INDEX);
+			rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
+			if (unlikely(rc)) {
+				lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_SLI,
+					"2013 Could not manually add FCF "
+					"record 0, status %d\n", rc);
+				rc = -ENODEV;
+				kfree(fcf_record);
+				goto out;
+			}
+			kfree(fcf_record);
+		}
+		/*
+		 * The driver is expected to do FIP/FCF. Call the port
+		 * and get the FCF Table.
+		 */
+		rc = lpfc_sli4_read_fcf_record(phba,
+					LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			goto out;
 	}
+
+	return;
 out:
 	lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
@@ -1147,10 +1807,12 @@ lpfc_enable_la(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag |= LPFC_PROCESS_LA;
-	control = readl(phba->HCregaddr);
-	control |= HC_LAINT_ENA;
-	writel(control, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		control = readl(phba->HCregaddr);
+		control |= HC_LAINT_ENA;
+		writel(control, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -1159,6 +1821,7 @@ lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
 {
 	lpfc_linkdown(phba);
 	lpfc_enable_la(phba);
+	lpfc_unregister_unused_fcf(phba);
 	/* turn on Link Attention interrupts - no CLEAR_LA needed */
 }
 
@@ -1175,7 +1838,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	READ_LA_VAR *la;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 
 	/* Unblock ELS traffic */
@@ -1190,7 +1853,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		goto lpfc_mbx_cmpl_read_la_free_mbuf;
 	}
 
-	la = (READ_LA_VAR *) & pmb->mb.un.varReadLA;
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
 
 	memcpy(&phba->alpa_map[0], mp->virt, 128);
 
@@ -1328,7 +1991,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 static void
 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
@@ -1381,7 +2044,7 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	switch (mb->mbxStatus) {
 	case 0x0011:
@@ -1416,6 +2079,128 @@ out:
 	return;
 }
 
+/**
+ * lpfc_create_static_vport - Read HBA config region to create static vports.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issue a DUMP mailbox command for config region 22 to get
+ * the list of static vports to be created. The function create vports
+ * based on the information returned from the HBA.
+ **/
+void
+lpfc_create_static_vport(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb = NULL;
+	MAILBOX_t *mb;
+	struct static_vport_info *vport_info;
+	int rc, i;
+	struct fc_vport_identifiers vport_id;
+	struct fc_vport *new_fc_vport;
+	struct Scsi_Host *shost;
+	struct lpfc_vport *vport;
+	uint16_t offset = 0;
+	uint8_t *vport_buff;
+
+	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0542 lpfc_create_static_vport failed to"
+				" allocate mailbox memory\n");
+		return;
+	}
+
+	mb = &pmb->u.mb;
+
+	vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
+	if (!vport_info) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0543 lpfc_create_static_vport failed to"
+				" allocate vport_info\n");
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return;
+	}
+
+	vport_buff = (uint8_t *) vport_info;
+	do {
+		lpfc_dump_static_vport(phba, pmb, offset);
+		pmb->vport = phba->pport;
+		rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO);
+
+		if ((rc != MBX_SUCCESS) || mb->mbxStatus) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0544 lpfc_create_static_vport failed to"
+				" issue dump mailbox command ret 0x%x "
+				"status 0x%x\n",
+				rc, mb->mbxStatus);
+			goto out;
+		}
+
+		if (mb->un.varDmp.word_cnt >
+			sizeof(struct static_vport_info) - offset)
+			mb->un.varDmp.word_cnt =
+			sizeof(struct static_vport_info) - offset;
+
+		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+			vport_buff + offset,
+			mb->un.varDmp.word_cnt);
+		offset += mb->un.varDmp.word_cnt;
+
+	} while (mb->un.varDmp.word_cnt &&
+		offset < sizeof(struct static_vport_info));
+
+
+	if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
+		((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
+			!= VPORT_INFO_REV)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0545 lpfc_create_static_vport bad"
+			" information header 0x%x 0x%x\n",
+			le32_to_cpu(vport_info->signature),
+			le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
+
+		goto out;
+	}
+
+	shost = lpfc_shost_from_vport(phba->pport);
+
+	for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
+		memset(&vport_id, 0, sizeof(vport_id));
+		vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
+		vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
+		if (!vport_id.port_name || !vport_id.node_name)
+			continue;
+
+		vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
+		vport_id.vport_type = FC_PORTTYPE_NPIV;
+		vport_id.disable = false;
+		new_fc_vport = fc_vport_create(shost, 0, &vport_id);
+
+		if (!new_fc_vport) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0546 lpfc_create_static_vport failed to"
+				" create vport \n");
+			continue;
+		}
+
+		vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
+		vport->vport_flag |= STATIC_VPORT;
+	}
+
+out:
+	/*
+	 * If this is timed out command, setting NULL to context2 tell SLI
+	 * layer not to use this buffer.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	pmb->context2 = NULL;
+	spin_unlock_irq(&phba->hbalock);
+	kfree(vport_info);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(pmb, phba->mbox_mem_pool);
+
+	return;
+}
+
 /*
  * This routine handles processing a Fabric REG_LOGIN mailbox
  * command upon completion. It is setup in the LPFC_MBOXQ
@@ -1426,16 +2211,17 @@ void
 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp;
-	struct lpfc_vport **vports;
-	int i;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	pmb->context1 = NULL;
 	pmb->context2 = NULL;
 	if (mb->mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+				 "0258 Register Fabric login error: 0x%x\n",
+				 mb->mbxStatus);
 		lpfc_mbuf_free(phba, mp->virt, mp->phys);
 		kfree(mp);
 		mempool_free(pmb, phba->mbox_mem_pool);
@@ -1454,9 +2240,6 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		}
 
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
-				 "0258 Register Fabric login error: 0x%x\n",
-				 mb->mbxStatus);
 		/* Decrement the reference count to ndlp after the reference
 		 * to the ndlp are done.
 		 */
@@ -1465,34 +2248,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
-		vports = lpfc_create_vport_work_array(phba);
-		if (vports != NULL)
-			for(i = 0;
-			    i <= phba->max_vpi && vports[i] != NULL;
-			    i++) {
-				if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
-					continue;
-				if (phba->fc_topology == TOPOLOGY_LOOP) {
-					lpfc_vport_set_state(vports[i],
-							FC_VPORT_LINKDOWN);
-					continue;
-				}
-				if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
-					lpfc_initial_fdisc(vports[i]);
-				else {
-					lpfc_vport_set_state(vports[i],
-						FC_VPORT_NO_FABRIC_SUPP);
-					lpfc_printf_vlog(vport, KERN_ERR,
-							 LOG_ELS,
-							"0259 No NPIV "
-							"Fabric support\n");
-				}
-			}
-		lpfc_destroy_vport_work_array(phba, vports);
+		lpfc_start_fdiscs(phba);
 		lpfc_do_scr_ns_plogi(phba, vport);
 	}
 
@@ -1516,13 +2277,16 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 void
 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 	struct lpfc_vport *vport = pmb->vport;
 
 	if (mb->mbxStatus) {
 out:
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "0260 Register NameServer error: 0x%x\n",
+				 mb->mbxStatus);
 		/* decrement the node reference count held for this
 		 * callback function.
 		 */
@@ -1546,15 +2310,13 @@ out:
 			return;
 		}
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				 "0260 Register NameServer error: 0x%x\n",
-				 mb->mbxStatus);
 		return;
 	}
 
 	pmb->context1 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -2055,7 +2817,7 @@ lpfc_check_sli_ndlp(struct lpfc_hba *phba,
 	if (pring->ringno == LPFC_ELS_RING) {
 		switch (icmd->ulpCommand) {
 		case CMD_GEN_REQUEST64_CR:
-			if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
+			if (iocb->context_un.ndlp == ndlp)
 				return 1;
 		case CMD_ELS_REQUEST64_CR:
 			if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
@@ -2102,7 +2864,7 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	 */
 	psli = &phba->sli;
 	rpi = ndlp->nlp_rpi;
-	if (rpi) {
+	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		/* Now process each ring */
 		for (i = 0; i < psli->num_rings; i++) {
 			pring = &psli->ring[i];
@@ -2150,7 +2912,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	LPFC_MBOXQ_t    *mbox;
 	int rc;
 
-	if (ndlp->nlp_rpi) {
+	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (mbox) {
 			lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
@@ -2162,6 +2924,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		}
 		lpfc_no_rpi(phba, ndlp);
 		ndlp->nlp_rpi = 0;
+		ndlp->nlp_flag &= ~NLP_RPI_VALID;
 		return 1;
 	}
 	return 0;
@@ -2252,7 +3015,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
 	if ((mb = phba->sli.mbox_active)) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mb->context2 = NULL;
 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -2261,7 +3024,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		    (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
@@ -2309,13 +3072,14 @@ lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	int rc;
 
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
-	if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) {
+	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
+	    !(ndlp->nlp_flag & NLP_RPI_VALID)) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */
 		if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
 			!= NULL) {
-			rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID,
+			rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
 			    (uint8_t *) &vport->fc_sparam, mbox, 0);
 			if (rc) {
 				mempool_free(mbox, phba->mbox_mem_pool);
@@ -2553,7 +3317,8 @@ lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	 * clear_la then don't send it.
 	 */
 	if ((phba->link_state >= LPFC_CLEAR_LA) ||
-	    (vport->port_type != LPFC_PHYSICAL_PORT))
+	    (vport->port_type != LPFC_PHYSICAL_PORT) ||
+		(phba->sli_rev == LPFC_SLI_REV4))
 		return;
 
 			/* Link up discovery */
@@ -2582,7 +3347,7 @@ lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 
 	regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (regvpimbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+		lpfc_reg_vpi(vport, regvpimbox);
 		regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
 		regvpimbox->vport = vport;
 		if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2642,7 +3407,8 @@ lpfc_disc_start(struct lpfc_vport *vport)
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
 	    !(vport->fc_flag & FC_PT2PT) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
@@ -2919,11 +3685,13 @@ restart_disc:
 		 * set port_state to PORT_READY if SLI2.
 		 * cmpl_reg_vpi will set port_state to READY for SLI3.
 		 */
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
-			lpfc_issue_reg_vpi(phba, vport);
-		else  {	/* NPIV Not enabled */
-			lpfc_issue_clear_la(phba, vport);
-			vport->port_state = LPFC_VPORT_READY;
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+				lpfc_issue_reg_vpi(phba, vport);
+			else  {	/* NPIV Not enabled */
+				lpfc_issue_clear_la(phba, vport);
+				vport->port_state = LPFC_VPORT_READY;
+			}
 		}
 
 		/* Setup and issue mailbox INITIALIZE LINK command */
@@ -2939,7 +3707,7 @@ restart_disc:
 		lpfc_linkdown(phba);
 		lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
 			       phba->cfg_link_speed);
-		initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+		initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
 		initlinkmbox->vport = vport;
 		initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
@@ -2959,11 +3727,13 @@ restart_disc:
 		 * set port_state to PORT_READY if SLI2.
 		 * cmpl_reg_vpi will set port_state to READY for SLI3.
 		 */
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
-			lpfc_issue_reg_vpi(phba, vport);
-		else {	/* NPIV Not enabled */
-			lpfc_issue_clear_la(phba, vport);
-			vport->port_state = LPFC_VPORT_READY;
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+				lpfc_issue_reg_vpi(phba, vport);
+			else  {	/* NPIV Not enabled */
+				lpfc_issue_clear_la(phba, vport);
+				vport->port_state = LPFC_VPORT_READY;
+			}
 		}
 		break;
 
@@ -3036,7 +3806,7 @@ restart_disc:
 void
 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf   *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 	struct lpfc_vport    *vport = pmb->vport;
@@ -3044,6 +3814,7 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	pmb->context1 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -3297,3 +4068,395 @@ lpfc_nlp_not_used(struct lpfc_nodelist *ndlp)
 			return 1;
 	return 0;
 }
+
+/**
+ * lpfc_fcf_inuse - Check if FCF can be unregistered.
+ * @phba: Pointer to hba context object.
+ *
+ * This function iterate through all FC nodes associated
+ * will all vports to check if there is any node with
+ * fc_rports associated with it. If there is an fc_rport
+ * associated with the node, then the node is either in
+ * discovered state or its devloss_timer is pending.
+ */
+static int
+lpfc_fcf_inuse(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i, ret = 0;
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host  *shost;
+
+	vports = lpfc_create_vport_work_array(phba);
+
+	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+		shost = lpfc_shost_from_vport(vports[i]);
+		spin_lock_irq(shost->host_lock);
+		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
+			if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
+			  (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
+				ret = 1;
+				spin_unlock_irq(shost->host_lock);
+				goto out;
+			}
+		}
+		spin_unlock_irq(shost->host_lock);
+	}
+out:
+	lpfc_destroy_vport_work_array(phba, vports);
+	return ret;
+}
+
+/**
+ * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2555 UNREG_VFI mbxStatus error x%x "
+			"HBA state x%x\n",
+			mboxq->u.mb.mbxStatus, vport->port_state);
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2550 UNREG_FCFI mbxStatus error x%x "
+			"HBA state x%x\n",
+			mboxq->u.mb.mbxStatus, vport->port_state);
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
+ * @phba: Pointer to hba context object.
+ *
+ * This function check if there are any connected remote port for the FCF and
+ * if all the devices are disconnected, this function unregister FCFI.
+ * This function also tries to use another FCF for discovery.
+ */
+void
+lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	struct lpfc_vport **vports;
+	int i;
+
+	spin_lock_irq(&phba->hbalock);
+	/*
+	 * If HBA is not running in FIP mode or
+	 * If HBA does not support FCoE or
+	 * If FCF is not registered.
+	 * do nothing.
+	 */
+	if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+		!(phba->fcf.fcf_flag & FCF_REGISTERED) ||
+		(phba->cfg_enable_fip == 0)) {
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	if (lpfc_fcf_inuse(phba))
+		return;
+
+
+	/* Unregister VPIs */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports &&
+		(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			lpfc_mbx_unreg_vpi(vports[i]);
+			vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+		}
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Unregister VFI */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2556 UNREG_VFI mbox allocation failed"
+			"HBA state x%x\n",
+			phba->pport->port_state);
+		return;
+	}
+
+	lpfc_unreg_vfi(mbox, phba->pport->vfi);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2557 UNREG_VFI issue mbox failed rc x%x "
+			"HBA state x%x\n",
+			rc, phba->pport->port_state);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* Unregister FCF */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2551 UNREG_FCFI mbox allocation failed"
+			"HBA state x%x\n",
+			phba->pport->port_state);
+		return;
+	}
+
+	lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2552 UNREG_FCFI issue mbox failed rc x%x "
+			"HBA state x%x\n",
+			rc, phba->pport->port_state);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_REGISTERED |
+		FCF_DISCOVERED | FCF_BOOT_ENABLE | FCF_IN_USE |
+		FCF_VALID_VLAN);
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * If driver is not unloading, check if there is any other
+	 * FCF record that can be used for discovery.
+	 */
+	if ((phba->pport->load_flag & FC_UNLOADING) ||
+		(phba->link_state < LPFC_LINK_UP))
+		return;
+
+	rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+
+	if (rc)
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2553 lpfc_unregister_unused_fcf failed to read FCF"
+			" record HBA state x%x\n",
+			phba->pport->port_state);
+}
+
+/**
+ * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCF connection table as in the config
+ *         region.
+ * This function create driver data structure for the FCF connection
+ * record table read from config region 23.
+ */
+static void
+lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
+	uint8_t *buff)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+	struct lpfc_fcf_conn_hdr *conn_hdr;
+	struct lpfc_fcf_conn_rec *conn_rec;
+	uint32_t record_count;
+	int i;
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
+	record_count = conn_hdr->length * sizeof(uint32_t)/
+		sizeof(struct lpfc_fcf_conn_rec);
+
+	conn_rec = (struct lpfc_fcf_conn_rec *)
+		(buff + sizeof(struct lpfc_fcf_conn_hdr));
+
+	for (i = 0; i < record_count; i++) {
+		if (!(conn_rec[i].flags & FCFCNCT_VALID))
+			continue;
+		conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
+			GFP_KERNEL);
+		if (!conn_entry) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2566 Failed to allocate connection"
+				" table entry\n");
+			return;
+		}
+
+		memcpy(&conn_entry->conn_rec, &conn_rec[i],
+			sizeof(struct lpfc_fcf_conn_rec));
+		conn_entry->conn_rec.vlan_tag =
+			le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF;
+		conn_entry->conn_rec.flags =
+			le16_to_cpu(conn_entry->conn_rec.flags);
+		list_add_tail(&conn_entry->list,
+			&phba->fcf_conn_rec_list);
+	}
+}
+
+/**
+ * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCoE parameter data structure.
+ *
+ *  This function update driver data structure with config
+ *  parameters read from config region 23.
+ */
+static void
+lpfc_read_fcoe_param(struct lpfc_hba *phba,
+			uint8_t *buff)
+{
+	struct lpfc_fip_param_hdr *fcoe_param_hdr;
+	struct lpfc_fcoe_params *fcoe_param;
+
+	fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
+		buff;
+	fcoe_param = (struct lpfc_fcoe_params *)
+		buff + sizeof(struct lpfc_fip_param_hdr);
+
+	if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
+		(fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
+		return;
+
+	if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+			FIPP_MODE_ON)
+		phba->cfg_enable_fip = 1;
+
+	if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+		FIPP_MODE_OFF)
+		phba->cfg_enable_fip = 0;
+
+	if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
+		phba->valid_vlan = 1;
+		phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
+			0xFFF;
+	}
+
+	phba->fc_map[0] = fcoe_param->fc_map[0];
+	phba->fc_map[1] = fcoe_param->fc_map[1];
+	phba->fc_map[2] = fcoe_param->fc_map[2];
+	return;
+}
+
+/**
+ * lpfc_get_rec_conf23 - Get a record type in config region data.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ * @rec_type: Record type to be searched.
+ *
+ * This function searches config region data to find the begining
+ * of the record specified by record_type. If record found, this
+ * function return pointer to the record else return NULL.
+ */
+static uint8_t *
+lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
+{
+	uint32_t offset = 0, rec_length;
+
+	if ((buff[0] == LPFC_REGION23_LAST_REC) ||
+		(size < sizeof(uint32_t)))
+		return NULL;
+
+	rec_length = buff[offset + 1];
+
+	/*
+	 * One TLV record has one word header and number of data words
+	 * specified in the rec_length field of the record header.
+	 */
+	while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
+		<= size) {
+		if (buff[offset] == rec_type)
+			return &buff[offset];
+
+		if (buff[offset] == LPFC_REGION23_LAST_REC)
+			return NULL;
+
+		offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
+		rec_length = buff[offset + 1];
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
+ * @phba: Pointer to lpfc_hba data structure.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ *
+ * This fuction parse the FCoE config parameters in config region 23 and
+ * populate driver data structure with the parameters.
+ */
+void
+lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
+		uint8_t *buff,
+		uint32_t size)
+{
+	uint32_t offset = 0, rec_length;
+	uint8_t *rec_ptr;
+
+	/*
+	 * If data size is less than 2 words signature and version cannot be
+	 * verified.
+	 */
+	if (size < 2*sizeof(uint32_t))
+		return;
+
+	/* Check the region signature first */
+	if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2567 Config region 23 has bad signature\n");
+		return;
+	}
+
+	offset += 4;
+
+	/* Check the data structure version */
+	if (buff[offset] != LPFC_REGION23_VERSION) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2568 Config region 23 has bad version\n");
+		return;
+	}
+	offset += 4;
+
+	rec_length = buff[offset + 1];
+
+	/* Read FCoE param record */
+	rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+			size - offset, FCOE_PARAM_TYPE);
+	if (rec_ptr)
+		lpfc_read_fcoe_param(phba, rec_ptr);
+
+	/* Read FCF connection table */
+	rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+		size - offset, FCOE_CONN_TBL_TYPE);
+	if (rec_ptr)
+		lpfc_read_fcf_conn_tbl(phba, rec_ptr);
+
+}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b498b..02aa016b93e 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -471,6 +471,35 @@ struct serv_parm {	/* Structure is in Big Endian format */
 };
 
 /*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+	 uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT		24
+#define fc_vft_hdr_r_ctl_MASK		0xFF
+#define fc_vft_hdr_r_ctl_WORD		word0
+#define fc_vft_hdr_ver_SHIFT		22
+#define fc_vft_hdr_ver_MASK		0x3
+#define fc_vft_hdr_ver_WORD		word0
+#define fc_vft_hdr_type_SHIFT		18
+#define fc_vft_hdr_type_MASK		0xF
+#define fc_vft_hdr_type_WORD		word0
+#define fc_vft_hdr_e_SHIFT		16
+#define fc_vft_hdr_e_MASK		0x1
+#define fc_vft_hdr_e_WORD		word0
+#define fc_vft_hdr_priority_SHIFT	13
+#define fc_vft_hdr_priority_MASK	0x7
+#define fc_vft_hdr_priority_WORD	word0
+#define fc_vft_hdr_vf_id_SHIFT		1
+#define fc_vft_hdr_vf_id_MASK		0xFFF
+#define fc_vft_hdr_vf_id_WORD		word0
+	uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT		24
+#define fc_vft_hdr_hopct_MASK		0xFF
+#define fc_vft_hdr_hopct_WORD		word1
+};
+
+/*
  *  Extended Link Service LS_COMMAND codes (Payload Word 0)
  */
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@ typedef struct {
 #define PCI_DEVICE_ID_HORNET        0xfe05
 #define PCI_DEVICE_ID_ZEPHYR_SCSP   0xfe11
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE  0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK    0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
@@ -1342,15 +1374,21 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_READ_LA64       0x95
 #define MBX_REG_VPI	    0x96
 #define MBX_UNREG_VPI	    0x97
-#define MBX_REG_VNPID	    0x96
-#define MBX_UNREG_VNPID	    0x97
 
 #define MBX_WRITE_WWN       0x98
 #define MBX_SET_DEBUG       0x99
 #define MBX_LOAD_EXP_ROM    0x9C
-
-#define MBX_MAX_CMDS        0x9D
+#define MBX_SLI4_CONFIG	    0x9B
+#define MBX_SLI4_REQ_FTRS   0x9D
+#define MBX_MAX_CMDS        0x9E
+#define MBX_RESUME_RPI      0x9E
 #define MBX_SLI2_CMD_MASK   0x80
+#define MBX_REG_VFI         0x9F
+#define MBX_REG_FCFI        0xA0
+#define MBX_UNREG_VFI       0xA1
+#define MBX_UNREG_FCFI	    0xA2
+#define MBX_INIT_VFI        0xA3
+#define MBX_INIT_VPI        0xA4
 
 /* IOCB Commands */
 
@@ -1440,6 +1478,16 @@ typedef struct {		/* FireFly BIU registers */
 #define CMD_IOCB_LOGENTRY_CN		0x94
 #define CMD_IOCB_LOGENTRY_ASYNC_CN	0x96
 
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 		0xD8
+#define DSSCMD_IWRITE64_CX		0xD9
+#define DSSCMD_IREAD64_CR		0xDA
+#define DSSCMD_IREAD64_CX		0xDB
+#define DSSCMD_INVALIDATE_DEK		0xDC
+#define DSSCMD_SET_KEK			0xDD
+#define DSSCMD_GET_KEK_ID		0xDE
+#define DSSCMD_GEN_XFER			0xDF
+
 #define CMD_MAX_IOCB_CMD        0xE6
 #define CMD_IOCB_MASK           0xff
 
@@ -1466,6 +1514,7 @@ typedef struct {		/* FireFly BIU registers */
 #define MBXERR_BAD_RCV_LENGTH       14
 #define MBXERR_DMA_ERROR            15
 #define MBXERR_ERROR                16
+#define MBXERR_LINK_DOWN            0x33
 #define MBX_NOT_FINISHED           255
 
 #define MBX_BUSY                   0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@ struct ulp_bde {
 #endif
 };
 
-struct ulp_bde64 {	/* SLI-2 */
-	union ULP_BDE_TUS {
-		uint32_t w;
-		struct {
-#ifdef __BIG_ENDIAN_BITFIELD
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
-		} f;
-	} tus;
-	uint32_t addrLow;
-	uint32_t addrHigh;
-};
-
 typedef struct ULP_BDL {	/* SLI-2 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t bdeFlags:8;	/* BDL Flags */
@@ -2287,7 +2310,7 @@ typedef struct {
 	uint32_t rsvd3;
 	uint32_t rsvd4;
 	uint32_t rsvd5;
-	uint16_t rsvd6;
+	uint16_t vfi;
 	uint16_t vpi;
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t rsvd1;
@@ -2297,7 +2320,7 @@ typedef struct {
 	uint32_t rsvd4;
 	uint32_t rsvd5;
 	uint16_t vpi;
-	uint16_t rsvd6;
+	uint16_t vfi;
 #endif
 } REG_VPI_VAR;
 
@@ -2457,7 +2480,7 @@ typedef struct {
 	uint32_t entry_index:16;
 #endif
 
-	uint32_t rsvd1;
+	uint32_t sli4_length;
 	uint32_t word_cnt;
 	uint32_t resp_offset;
 } DUMP_VAR;
@@ -2470,9 +2493,32 @@ typedef struct {
 #define  DMP_RSP_OFFSET          0x14   /* word 5 contains first word of rsp */
 #define  DMP_RSP_SIZE            0x6C   /* maximum of 27 words of rsp data */
 
+#define  DMP_REGION_VPORT	 0x16   /* VPort info region */
+#define  DMP_VPORT_REGION_SIZE	 0x200
+#define  DMP_MBOX_OFFSET_WORD	 0x5
+
+#define  DMP_REGION_FCOEPARAM	 0x17   /* fcoe param region */
+#define  DMP_FCOEPARAM_RGN_SIZE	 0x400
+
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
 
+struct vport_rec {
+	uint8_t wwpn[8];
+	uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+	uint32_t 		signature;
+	uint32_t		rev;
+	struct vport_rec 	vport_list[MAX_STATIC_VPORT_COUNT];
+	uint32_t		resvd[66];
+};
+
 /* Option rom version structure */
 struct prog_id {
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@ typedef struct {
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t cmv       :  1;  /* Configure Max VPIs                   */
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
@@ -2717,10 +2765,14 @@ typedef struct {
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
 	uint32_t cmv	   :  1;  /* Configure Max VPIs                   */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
@@ -2740,7 +2792,9 @@ typedef struct {
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@ typedef struct {
 
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 #else	/*  __LITTLE_ENDIAN */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
 #endif
 
-	uint32_t rsvd4;           /* Reserved                             */
+	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 #endif
 
 } CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@ lpfc_error_lost_link(IOCB_t *iocbp)
 #define MENLO_TIMEOUT 30
 #define SETVAR_MLOMNT 0x103107
 #define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 00000000000..39c34b3ad29
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ *	struct temp {
+ *		uint32_t	field1;
+ *		uint32_t	field2;
+ *		uint32_t	field3;
+ *		uint32_t	field4;
+ *	#define example_bit_field_SHIFT		7
+ *	#define example_bit_field_MASK		0x03
+ *	#define example_bit_field_WORD		field4
+ *		uint32_t	field5;
+ *	};
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ *	struct temp t1;
+ *	value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ *	bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ *	bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+	(((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+	((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+		 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+	uint32_t addr_lo;
+	uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0		1
+#define LPFC_SLI4_BAR1		2
+#define LPFC_SLI4_BAR2		4
+
+#define LPFC_SLI4_MBX_EMBED	true
+#define LPFC_SLI4_MBX_NEMBED	false
+
+#define LPFC_SLI4_MB_WORD_COUNT		64
+#define LPFC_MAX_MQ_PAGE		8
+#define LPFC_MAX_WQ_PAGE		8
+#define LPFC_MAX_CQ_PAGE		4
+#define LPFC_MAX_EQ_PAGE		8
+
+#define LPFC_VIR_FUNC_MAX       32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX        5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE	0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE	16
+#define LPFC_ALIGN_64_BYTE	64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET	256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE	0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI	0x2
+#define LPFC_BMBX_BIT1_ADDR_LO	0
+#define LPFC_RPI_HDR_COUNT	64
+#define LPFC_HDR_TEMPLATE_SIZE	4096
+#define LPFC_RPI_ALLOC_ERROR 	0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT	132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX	 0
+
+/* Virtual function numbers */
+#define LPFC_VF0		0
+#define LPFC_VF1		1
+#define LPFC_VF2		2
+#define LPFC_VF3		3
+#define LPFC_VF4		4
+#define LPFC_VF5		5
+#define LPFC_VF6		6
+#define LPFC_VF7		7
+#define LPFC_VF8		8
+#define LPFC_VF9		9
+#define LPFC_VF10		10
+#define LPFC_VF11		11
+#define LPFC_VF12		12
+#define LPFC_VF13		13
+#define LPFC_VF14		14
+#define LPFC_VF15		15
+#define LPFC_VF16		16
+#define LPFC_VF17		17
+#define LPFC_VF18		18
+#define LPFC_VF19		19
+#define LPFC_VF20		20
+#define LPFC_VF21		21
+#define LPFC_VF22		22
+#define LPFC_VF23		23
+#define LPFC_VF24		24
+#define LPFC_VF25		25
+#define LPFC_VF26		26
+#define LPFC_VF27		27
+#define LPFC_VF28		28
+#define LPFC_VF29		29
+#define LPFC_VF30		30
+#define LPFC_VF31		31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0		0
+#define LPFC_PCI_FUNC1		1
+#define LPFC_PCI_FUNC2		2
+#define LPFC_PCI_FUNC3		3
+#define LPFC_PCI_FUNC4		4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT	4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST       651042
+#define LPFC_MIM_IMAX          636
+#define LPFC_FP_DEF_IMAX       10000
+#define LPFC_SP_DEF_IMAX       10000
+
+struct ulp_bde64 {
+	union ULP_BDE_TUS {
+		uint32_t w;
+		struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+#else	/*  __LITTLE_ENDIAN_BITFIELD */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
+		} f;
+	} tus;
+	uint32_t addrLow;
+	uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+	uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+	uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT	16
+#define lpfc_eqe_resource_id_MASK	0x000000FF
+#define lpfc_eqe_resource_id_WORD	word0
+#define lpfc_eqe_minor_code_SHIFT	4
+#define lpfc_eqe_minor_code_MASK	0x00000FFF
+#define lpfc_eqe_minor_code_WORD	word0
+#define lpfc_eqe_major_code_SHIFT	1
+#define lpfc_eqe_major_code_MASK	0x00000007
+#define lpfc_eqe_major_code_WORD	word0
+#define lpfc_eqe_valid_SHIFT		0
+#define lpfc_eqe_valid_MASK		0x00000001
+#define lpfc_eqe_valid_WORD		word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t word3;
+#define lpfc_cqe_valid_SHIFT		31
+#define lpfc_cqe_valid_MASK		0x00000001
+#define lpfc_cqe_valid_WORD		word3
+#define lpfc_cqe_code_SHIFT		16
+#define lpfc_cqe_code_MASK		0x000000FF
+#define lpfc_cqe_code_WORD		word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS		0x0
+#define CQE_STATUS_FCP_RSP_FAILURE	0x1
+#define CQE_STATUS_REMOTE_STOP		0x2
+#define CQE_STATUS_LOCAL_REJECT		0x3
+#define CQE_STATUS_NPORT_RJT		0x4
+#define CQE_STATUS_FABRIC_RJT		0x5
+#define CQE_STATUS_NPORT_BSY		0x6
+#define CQE_STATUS_FABRIC_BSY		0x7
+#define CQE_STATUS_INTERMED_RSP		0x8
+#define CQE_STATUS_LS_RJT		0x9
+#define CQE_STATUS_CMD_REJECT		0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK	0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY	0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR		0x0
+#define CQE_HW_STATUS_UNDERRUN		0x1
+#define CQE_HW_STATUS_OVERRUN		0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE		0x1
+#define CQE_CODE_RELEASE_WQE		0x2
+#define CQE_CODE_RECEIVE		0x4
+#define CQE_CODE_XRI_ABORTED		0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+	uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT	16
+#define lpfc_wcqe_c_request_tag_MASK	0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD	word0
+#define lpfc_wcqe_c_status_SHIFT	8
+#define lpfc_wcqe_c_status_MASK		0x000000FF
+#define lpfc_wcqe_c_status_WORD		word0
+#define lpfc_wcqe_c_hw_status_SHIFT	0
+#define lpfc_wcqe_c_hw_status_MASK	0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD	word0
+	uint32_t total_data_placed;
+	uint32_t parameter;
+	uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT		28
+#define lpfc_wcqe_c_xb_MASK		0x00000001
+#define lpfc_wcqe_c_xb_WORD		word3
+#define lpfc_wcqe_c_pv_SHIFT		27
+#define lpfc_wcqe_c_pv_MASK		0x00000001
+#define lpfc_wcqe_c_pv_WORD		word3
+#define lpfc_wcqe_c_priority_SHIFT	24
+#define lpfc_wcqe_c_priority_MASK		0x00000007
+#define lpfc_wcqe_c_priority_WORD		word3
+#define lpfc_wcqe_c_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT		16
+#define lpfc_wcqe_r_wq_id_MASK		0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD		word2
+#define lpfc_wcqe_r_wqe_index_SHIFT	0
+#define lpfc_wcqe_r_wqe_index_MASK	0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD	word2
+	uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD		lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+	uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT		8
+#define lpfc_wcqe_xa_status_MASK		0x000000FF
+#define lpfc_wcqe_xa_status_WORD		word0
+	uint32_t parameter;
+	uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT	16
+#define lpfc_wcqe_xa_remote_xid_MASK	0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD	word2
+#define lpfc_wcqe_xa_xri_SHIFT		0
+#define lpfc_wcqe_xa_xri_MASK		0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD		word2
+	uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT	lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT		30
+#define lpfc_wcqe_xa_ia_MASK		0x00000001
+#define lpfc_wcqe_xa_ia_WORD		word3
+#define CQE_XRI_ABORTED_IA_REMOTE	0
+#define CQE_XRI_ABORTED_IA_LOCAL	1
+#define lpfc_wcqe_xa_br_SHIFT		29
+#define lpfc_wcqe_xa_br_MASK		0x00000001
+#define lpfc_wcqe_xa_br_WORD		word3
+#define CQE_XRI_ABORTED_BR_BA_ACC	0
+#define CQE_XRI_ABORTED_BR_BA_RJT	1
+#define lpfc_wcqe_xa_eo_SHIFT		28
+#define lpfc_wcqe_xa_eo_MASK		0x00000001
+#define lpfc_wcqe_xa_eo_WORD		word3
+#define CQE_XRI_ABORTED_EO_REMOTE	0
+#define CQE_XRI_ABORTED_EO_LOCAL	1
+#define lpfc_wcqe_xa_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+	uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT		16
+#define lpfc_rcqe_bindex_MASK		0x0000FFF
+#define lpfc_rcqe_bindex_WORD		word0
+#define lpfc_rcqe_status_SHIFT		8
+#define lpfc_rcqe_status_MASK		0x000000FF
+#define lpfc_rcqe_status_WORD		word0
+#define FC_STATUS_RQ_SUCCESS		0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 	0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 	0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 	0x13 /* Frame Discard */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rcqe_length_SHIFT		16
+#define lpfc_rcqe_length_MASK		0x0000FFFF
+#define lpfc_rcqe_length_WORD		word2
+#define lpfc_rcqe_rq_id_SHIFT		6
+#define lpfc_rcqe_rq_id_MASK		0x000003FF
+#define lpfc_rcqe_rq_id_WORD		word2
+#define lpfc_rcqe_fcf_id_SHIFT		0
+#define lpfc_rcqe_fcf_id_MASK		0x0000003F
+#define lpfc_rcqe_fcf_id_WORD		word2
+	uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT		30
+#define lpfc_rcqe_port_MASK		0x00000001
+#define lpfc_rcqe_port_WORD		word3
+#define lpfc_rcqe_hdr_length_SHIFT	24
+#define lpfc_rcqe_hdr_length_MASK	0x0000001F
+#define lpfc_rcqe_hdr_length_WORD	word3
+#define lpfc_rcqe_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD		lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT		8
+#define lpfc_rcqe_eof_MASK		0x000000FF
+#define lpfc_rcqe_eof_WORD		word3
+#define FCOE_EOFn	0x41
+#define FCOE_EOFt	0x42
+#define FCOE_EOFni	0x49
+#define FCOE_EOFa	0x50
+#define lpfc_rcqe_sof_SHIFT		0
+#define lpfc_rcqe_sof_MASK		0x000000FF
+#define lpfc_rcqe_sof_WORD		word3
+#define FCOE_SOFi2	0x2d
+#define FCOE_SOFi3	0x2e
+#define FCOE_SOFn2	0x35
+#define FCOE_SOFn3	0x36
+};
+
+struct lpfc_wqe_generic{
+	struct ulp_bde64 bde;
+	uint32_t word3;
+	uint32_t word4;
+	uint32_t word5;
+	uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT	16
+#define lpfc_wqe_gen_context_MASK	0x0000FFFF
+#define lpfc_wqe_gen_context_WORD	word6
+#define lpfc_wqe_gen_xri_SHIFT		0
+#define lpfc_wqe_gen_xri_MASK		0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD		word6
+	uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT		23
+#define lpfc_wqe_gen_lnk_MASK		0x00000001
+#define lpfc_wqe_gen_lnk_WORD		word7
+#define lpfc_wqe_gen_erp_SHIFT		22
+#define lpfc_wqe_gen_erp_MASK		0x00000001
+#define lpfc_wqe_gen_erp_WORD		word7
+#define lpfc_wqe_gen_pu_SHIFT		20
+#define lpfc_wqe_gen_pu_MASK		0x00000003
+#define lpfc_wqe_gen_pu_WORD		word7
+#define lpfc_wqe_gen_class_SHIFT	16
+#define lpfc_wqe_gen_class_MASK		0x00000007
+#define lpfc_wqe_gen_class_WORD		word7
+#define lpfc_wqe_gen_command_SHIFT	8
+#define lpfc_wqe_gen_command_MASK	0x000000FF
+#define lpfc_wqe_gen_command_WORD	word7
+#define lpfc_wqe_gen_status_SHIFT	4
+#define lpfc_wqe_gen_status_MASK	0x0000000F
+#define lpfc_wqe_gen_status_WORD	word7
+#define lpfc_wqe_gen_ct_SHIFT		2
+#define lpfc_wqe_gen_ct_MASK		0x00000007
+#define lpfc_wqe_gen_ct_WORD		word7
+	uint32_t abort_tag;
+	uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT	0
+#define lpfc_wqe_gen_request_tag_MASK	0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD	word9
+	uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT		24
+#define lpfc_wqe_gen_ccp_MASK		0x000000FF
+#define lpfc_wqe_gen_ccp_WORD		word10
+#define lpfc_wqe_gen_ccpe_SHIFT		23
+#define lpfc_wqe_gen_ccpe_MASK		0x00000001
+#define lpfc_wqe_gen_ccpe_WORD		word10
+#define lpfc_wqe_gen_pv_SHIFT		19
+#define lpfc_wqe_gen_pv_MASK		0x00000001
+#define lpfc_wqe_gen_pv_WORD		word10
+#define lpfc_wqe_gen_pri_SHIFT		16
+#define lpfc_wqe_gen_pri_MASK		0x00000007
+#define lpfc_wqe_gen_pri_WORD		word10
+	uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT	16
+#define lpfc_wqe_gen_cq_id_MASK		0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD		word11
+#define LPFC_WQE_CQ_ID_DEFAULT	0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT		7
+#define lpfc_wqe_gen_wqec_MASK		0x00000001
+#define lpfc_wqe_gen_wqec_WORD		word11
+#define lpfc_wqe_gen_cmd_type_SHIFT	0
+#define lpfc_wqe_gen_cmd_type_MASK	0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD	word11
+	uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+	uint32_t address_hi;
+	uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+	uint32_t word2;
+#define lpfc_bde4_last_SHIFT		31
+#define lpfc_bde4_last_MASK		0x00000001
+#define lpfc_bde4_last_WORD		word2
+#define lpfc_bde4_sge_offset_SHIFT	0
+#define lpfc_bde4_sge_offset_MASK	0x000003FF
+#define lpfc_bde4_sge_offset_WORD	word2
+	uint32_t word3;
+#define lpfc_bde4_length_SHIFT		0
+#define lpfc_bde4_length_MASK		0x000000FF
+#define lpfc_bde4_length_WORD		word3
+};
+
+struct lpfc_register {
+	uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI		0x00A4
+#define LPFC_UERR_STATUS_LO		0x00A0
+#define LPFC_ONLINE0			0x00B0
+#define LPFC_ONLINE1			0x00B4
+#define LPFC_SCRATCHPAD			0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE			0x00AC
+#define lpfc_hst_state_perr_SHIFT	31
+#define lpfc_hst_state_perr_MASK	0x1
+#define lpfc_hst_state_perr_WORD	word0
+#define lpfc_hst_state_sfi_SHIFT	30
+#define lpfc_hst_state_sfi_MASK		0x1
+#define lpfc_hst_state_sfi_WORD		word0
+#define lpfc_hst_state_nip_SHIFT	29
+#define lpfc_hst_state_nip_MASK		0x1
+#define lpfc_hst_state_nip_WORD		word0
+#define lpfc_hst_state_ipc_SHIFT	28
+#define lpfc_hst_state_ipc_MASK		0x1
+#define lpfc_hst_state_ipc_WORD		word0
+#define lpfc_hst_state_xrom_SHIFT	27
+#define lpfc_hst_state_xrom_MASK	0x1
+#define lpfc_hst_state_xrom_WORD	word0
+#define lpfc_hst_state_dl_SHIFT		26
+#define lpfc_hst_state_dl_MASK		0x1
+#define lpfc_hst_state_dl_WORD		word0
+#define lpfc_hst_state_port_status_SHIFT	0
+#define lpfc_hst_state_port_status_MASK		0xFFFF
+#define lpfc_hst_state_port_status_WORD		word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET			0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY		0x0001
+#define LPFC_POST_STAGE_HOST_RDY			0x0002
+#define LPFC_POST_STAGE_BE_RESET			0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START		0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE			0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START		0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE			0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START		0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE		0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START			0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE			0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START		0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE		0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START		0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE		0x0701
+#define LPFC_POST_STAGE_ARMFW_START			0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START		0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE			0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START	0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE	0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET			0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK			0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE		0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP			0x0B03
+#define LPFC_POST_STAGE_PARSE_XML			0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE			0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE			0x0B06
+#define LPFC_POST_STAGE_RC_DONE				0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM			0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS			0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY			0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 			0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT			4
+#define lpfc_scratchpad_slirev_MASK			0xF
+#define lpfc_scratchpad_slirev_WORD			word0
+#define lpfc_scratchpad_chiptype_SHIFT			8
+#define lpfc_scratchpad_chiptype_MASK			0xFF
+#define lpfc_scratchpad_chiptype_WORD			word0
+#define lpfc_scratchpad_featurelevel1_SHIFT		16
+#define lpfc_scratchpad_featurelevel1_MASK		0xFF
+#define lpfc_scratchpad_featurelevel1_WORD		word0
+#define lpfc_scratchpad_featurelevel2_SHIFT		24
+#define lpfc_scratchpad_featurelevel2_MASK		0xFF
+#define lpfc_scratchpad_featurelevel2_WORD		word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL	0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL	0xFFFFFFFF
+
+#define LPFC_HST_ISR0		0x0C18
+#define LPFC_HST_ISR1		0x0C1C
+#define LPFC_HST_ISR2		0x0C20
+#define LPFC_HST_ISR3		0x0C24
+#define LPFC_HST_ISR4		0x0C28
+
+#define LPFC_HST_IMR0		0x0C48
+#define LPFC_HST_IMR1		0x0C4C
+#define LPFC_HST_IMR2		0x0C50
+#define LPFC_HST_IMR3		0x0C54
+#define LPFC_HST_IMR4		0x0C58
+
+#define LPFC_HST_ISCR0		0x0C78
+#define LPFC_HST_ISCR1		0x0C7C
+#define LPFC_HST_ISCR2		0x0C80
+#define LPFC_HST_ISCR3		0x0C84
+#define LPFC_HST_ISCR4		0x0C88
+
+#define LPFC_SLI4_INTR0			BIT0
+#define LPFC_SLI4_INTR1			BIT1
+#define LPFC_SLI4_INTR2			BIT2
+#define LPFC_SLI4_INTR3			BIT3
+#define LPFC_SLI4_INTR4			BIT4
+#define LPFC_SLI4_INTR5			BIT5
+#define LPFC_SLI4_INTR6			BIT6
+#define LPFC_SLI4_INTR7			BIT7
+#define LPFC_SLI4_INTR8			BIT8
+#define LPFC_SLI4_INTR9			BIT9
+#define LPFC_SLI4_INTR10		BIT10
+#define LPFC_SLI4_INTR11		BIT11
+#define LPFC_SLI4_INTR12		BIT12
+#define LPFC_SLI4_INTR13		BIT13
+#define LPFC_SLI4_INTR14		BIT14
+#define LPFC_SLI4_INTR15		BIT15
+#define LPFC_SLI4_INTR16		BIT16
+#define LPFC_SLI4_INTR17		BIT17
+#define LPFC_SLI4_INTR18		BIT18
+#define LPFC_SLI4_INTR19		BIT19
+#define LPFC_SLI4_INTR20		BIT20
+#define LPFC_SLI4_INTR21		BIT21
+#define LPFC_SLI4_INTR22		BIT22
+#define LPFC_SLI4_INTR23		BIT23
+#define LPFC_SLI4_INTR24		BIT24
+#define LPFC_SLI4_INTR25		BIT25
+#define LPFC_SLI4_INTR26		BIT26
+#define LPFC_SLI4_INTR27		BIT27
+#define LPFC_SLI4_INTR28		BIT28
+#define LPFC_SLI4_INTR29		BIT29
+#define LPFC_SLI4_INTR30		BIT30
+#define LPFC_SLI4_INTR31		BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL		0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT	16
+#define lpfc_rq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD	word0
+#define LPFC_RQ_POST_BATCH		8	/* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT		0
+#define lpfc_rq_doorbell_id_MASK		0x03FF
+#define lpfc_rq_doorbell_id_WORD		word0
+
+#define LPFC_WQ_DOORBELL		0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT	24
+#define lpfc_wq_doorbell_num_posted_MASK	0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD	word0
+#define lpfc_wq_doorbell_index_SHIFT		16
+#define lpfc_wq_doorbell_index_MASK		0x00FF
+#define lpfc_wq_doorbell_index_WORD		word0
+#define lpfc_wq_doorbell_id_SHIFT		0
+#define lpfc_wq_doorbell_id_MASK		0xFFFF
+#define lpfc_wq_doorbell_id_WORD		word0
+
+#define LPFC_EQCQ_DOORBELL		0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT		29
+#define lpfc_eqcq_doorbell_arm_MASK		0x0001
+#define lpfc_eqcq_doorbell_arm_WORD		word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT	16
+#define lpfc_eqcq_doorbell_num_released_MASK	0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD	word0
+#define lpfc_eqcq_doorbell_qt_SHIFT		10
+#define lpfc_eqcq_doorbell_qt_MASK		0x0001
+#define lpfc_eqcq_doorbell_qt_WORD		word0
+#define LPFC_QUEUE_TYPE_COMPLETION	0
+#define LPFC_QUEUE_TYPE_EVENT		1
+#define lpfc_eqcq_doorbell_eqci_SHIFT		9
+#define lpfc_eqcq_doorbell_eqci_MASK		0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT		0
+#define lpfc_eqcq_doorbell_cqid_MASK		0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT		0
+#define lpfc_eqcq_doorbell_eqid_MASK		0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD		word0
+
+#define LPFC_BMBX			0x0160
+#define lpfc_bmbx_addr_SHIFT		2
+#define lpfc_bmbx_addr_MASK		0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD		word0
+#define lpfc_bmbx_hi_SHIFT		1
+#define lpfc_bmbx_hi_MASK		0x0001
+#define lpfc_bmbx_hi_WORD		word0
+#define lpfc_bmbx_rdy_SHIFT		0
+#define lpfc_bmbx_rdy_MASK		0x0001
+#define lpfc_bmbx_rdy_WORD		word0
+
+#define LPFC_MQ_DOORBELL			0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT	16
+#define lpfc_mq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD	word0
+#define lpfc_mq_doorbell_id_SHIFT		0
+#define lpfc_mq_doorbell_id_MASK		0x03FF
+#define lpfc_mq_doorbell_id_WORD		word0
+
+struct lpfc_sli4_cfg_mhdr {
+	uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT		0
+#define lpfc_mbox_hdr_emb_MASK		0x00000001
+#define lpfc_mbox_hdr_emb_WORD		word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT	3
+#define lpfc_mbox_hdr_sge_cnt_MASK	0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD	word1
+	uint32_t payload_length;
+	uint32_t tag_lo;
+	uint32_t tag_hi;
+	uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_port_number_SHIFT		16
+#define lpfc_mbox_hdr_port_number_MASK		0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t timeout;
+		uint32_t request_length;
+		uint32_t reserved9;
+	} request;
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT		0
+#define lpfc_mbox_hdr_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_status_WORD		word7
+#define lpfc_mbox_hdr_add_status_SHIFT		8
+#define lpfc_mbox_hdr_add_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD		word7
+		uint32_t response_length;
+		uint32_t actual_response_length;
+	} response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON	0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE	0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0   0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1	0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE		0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE		0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE		0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES	0x20
+#define LPFC_MBOX_OPCODE_NOP			0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY		0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY		0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY		0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET		0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE			0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY		0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES		0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES		0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE			0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY		0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE		0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF			0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF		0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE		0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+	uint32_t word0;
+#define lpfc_eq_context_size_SHIFT	31
+#define lpfc_eq_context_size_MASK	0x00000001
+#define lpfc_eq_context_size_WORD	word0
+#define LPFC_EQE_SIZE_4			0x0
+#define LPFC_EQE_SIZE_16		0x1
+#define lpfc_eq_context_valid_SHIFT	29
+#define lpfc_eq_context_valid_MASK	0x00000001
+#define lpfc_eq_context_valid_WORD	word0
+	uint32_t word1;
+#define lpfc_eq_context_count_SHIFT	26
+#define lpfc_eq_context_count_MASK	0x00000003
+#define lpfc_eq_context_count_WORD	word1
+#define LPFC_EQ_CNT_256		0x0
+#define LPFC_EQ_CNT_512		0x1
+#define LPFC_EQ_CNT_1024	0x2
+#define LPFC_EQ_CNT_2048	0x3
+#define LPFC_EQ_CNT_4096	0x4
+	uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT	13
+#define lpfc_eq_context_delay_multi_MASK	0x000003FF
+#define lpfc_eq_context_delay_multi_WORD	word2
+	uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+	uint32_t sgl_pg0_addr_lo;
+	uint32_t sgl_pg0_addr_hi;
+	uint32_t sgl_pg1_addr_lo;
+	uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+	struct mbox_header header;
+	uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT	0
+#define lpfc_post_sgl_pages_xri_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD	word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT	16
+#define lpfc_post_sgl_pages_xricnt_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD	word0
+	struct sgl_page_pairs  sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word0;
+	struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+	uint32_t pa_lo;
+	uint32_t pa_hi;
+	uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES	19
+	struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+	void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT	0
+#define lpfc_mbx_eq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD	word0
+			struct eq_context context;
+			struct dma_address page[LPFC_MAX_EQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT	0
+#define lpfc_mbx_eq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_eq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_eq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_nop {
+	struct mbox_header header;
+	uint32_t context[2];
+};
+
+struct cq_context {
+	uint32_t word0;
+#define lpfc_cq_context_event_SHIFT	31
+#define lpfc_cq_context_event_MASK	0x00000001
+#define lpfc_cq_context_event_WORD	word0
+#define lpfc_cq_context_valid_SHIFT	29
+#define lpfc_cq_context_valid_MASK	0x00000001
+#define lpfc_cq_context_valid_WORD	word0
+#define lpfc_cq_context_count_SHIFT	27
+#define lpfc_cq_context_count_MASK	0x00000003
+#define lpfc_cq_context_count_WORD	word0
+#define LPFC_CQ_CNT_256		0x0
+#define LPFC_CQ_CNT_512		0x1
+#define LPFC_CQ_CNT_1024	0x2
+	uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT		22
+#define lpfc_cq_eq_id_MASK		0x000000FF
+#define lpfc_cq_eq_id_WORD		word1
+	uint32_t reserved0;
+	uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT	0
+#define lpfc_mbx_cq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD	word0
+			struct cq_context context;
+			struct dma_address page[LPFC_MAX_CQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT	0
+#define lpfc_mbx_cq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_cq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_cq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct wq_context {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT	0
+#define lpfc_mbx_wq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD	word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT		16
+#define lpfc_mbx_wq_create_cq_id_MASK		0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD		word0
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT	0
+#define lpfc_mbx_wq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_wq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_wq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+	uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT	16
+#define lpfc_rq_context_rq_size_MASK	0x0000000F
+#define lpfc_rq_context_rq_size_WORD	word0
+#define LPFC_RQ_RING_SIZE_512		9	/* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024		10	/* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048		11	/* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096		12	/* 4096 entries */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT	16
+#define lpfc_rq_context_cq_id_MASK	0x000003FF
+#define lpfc_rq_context_cq_id_WORD	word2
+#define lpfc_rq_context_buf_size_SHIFT	0
+#define lpfc_rq_context_buf_size_MASK	0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD	word2
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT	0
+#define lpfc_mbx_rq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD	word0
+			struct rq_context context;
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT	0
+#define lpfc_mbx_rq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_rq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_rq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct mq_context {
+	uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT	22
+#define lpfc_mq_context_cq_id_MASK	0x000003FF
+#define lpfc_mq_context_cq_id_WORD	word0
+#define lpfc_mq_context_count_SHIFT	16
+#define lpfc_mq_context_count_MASK	0x0000000F
+#define lpfc_mq_context_count_WORD	word0
+#define LPFC_MQ_CNT_16		0x5
+#define LPFC_MQ_CNT_32		0x6
+#define LPFC_MQ_CNT_64		0x7
+#define LPFC_MQ_CNT_128		0x8
+	uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT	31
+#define lpfc_mq_context_valid_MASK	0x00000001
+#define lpfc_mq_context_valid_WORD	word1
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT	0
+#define lpfc_mbx_mq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD	word0
+			struct mq_context context;
+			struct dma_address page[LPFC_MAX_MQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT	0
+#define lpfc_mbx_mq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_mq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_mq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT  0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK   0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD   word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT   16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK    0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD    word10
+	uint32_t rpi_paddr_lo;
+	uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge {	/* SLI-4 */
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+
+	uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT	0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK	0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD	word2
+#define lpfc_sli4_sge_last_SHIFT	31 /* Last SEG in the SGL sets
+						this  flag !! */
+#define lpfc_sli4_sge_last_MASK		0x00000001
+#define lpfc_sli4_sge_last_WORD		word2
+	uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT		0
+#define lpfc_sli4_sge_len_MASK		0x0001FFFF
+#define lpfc_sli4_sge_len_WORD		word3
+};
+
+struct fcf_record {
+	uint32_t max_rcv_size;
+	uint32_t fka_adv_period;
+	uint32_t fip_priority;
+	uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT		0
+#define lpfc_fcf_record_mac_0_MASK		0x000000FF
+#define lpfc_fcf_record_mac_0_WORD		word3
+#define lpfc_fcf_record_mac_1_SHIFT		8
+#define lpfc_fcf_record_mac_1_MASK		0x000000FF
+#define lpfc_fcf_record_mac_1_WORD		word3
+#define lpfc_fcf_record_mac_2_SHIFT		16
+#define lpfc_fcf_record_mac_2_MASK		0x000000FF
+#define lpfc_fcf_record_mac_2_WORD		word3
+#define lpfc_fcf_record_mac_3_SHIFT		24
+#define lpfc_fcf_record_mac_3_MASK		0x000000FF
+#define lpfc_fcf_record_mac_3_WORD		word3
+	uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT		0
+#define lpfc_fcf_record_mac_4_MASK		0x000000FF
+#define lpfc_fcf_record_mac_4_WORD		word4
+#define lpfc_fcf_record_mac_5_SHIFT		8
+#define lpfc_fcf_record_mac_5_MASK		0x000000FF
+#define lpfc_fcf_record_mac_5_WORD		word4
+#define lpfc_fcf_record_fcf_avail_SHIFT		16
+#define lpfc_fcf_record_fcf_avail_MASK		0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD		word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT	24
+#define lpfc_fcf_record_mac_addr_prov_MASK	0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD	word4
+#define LPFC_FCF_FPMA           1 	/* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA           2       /* Server Provided MAC Address */
+	uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT	0
+#define lpfc_fcf_record_fab_name_0_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD		word5
+#define lpfc_fcf_record_fab_name_1_SHIFT	8
+#define lpfc_fcf_record_fab_name_1_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD		word5
+#define lpfc_fcf_record_fab_name_2_SHIFT	16
+#define lpfc_fcf_record_fab_name_2_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD		word5
+#define lpfc_fcf_record_fab_name_3_SHIFT	24
+#define lpfc_fcf_record_fab_name_3_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD		word5
+	uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT	0
+#define lpfc_fcf_record_fab_name_4_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD		word6
+#define lpfc_fcf_record_fab_name_5_SHIFT	8
+#define lpfc_fcf_record_fab_name_5_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD		word6
+#define lpfc_fcf_record_fab_name_6_SHIFT	16
+#define lpfc_fcf_record_fab_name_6_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD		word6
+#define lpfc_fcf_record_fab_name_7_SHIFT	24
+#define lpfc_fcf_record_fab_name_7_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD		word6
+	uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT		0
+#define lpfc_fcf_record_fc_map_0_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD		word7
+#define lpfc_fcf_record_fc_map_1_SHIFT		8
+#define lpfc_fcf_record_fc_map_1_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD		word7
+#define lpfc_fcf_record_fc_map_2_SHIFT		16
+#define lpfc_fcf_record_fc_map_2_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD		word7
+#define lpfc_fcf_record_fcf_valid_SHIFT		24
+#define lpfc_fcf_record_fcf_valid_MASK		0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD		word7
+	uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT		0
+#define lpfc_fcf_record_fcf_index_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD		word8
+#define lpfc_fcf_record_fcf_state_SHIFT		16
+#define lpfc_fcf_record_fcf_state_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD		word8
+	uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	union {
+		struct {
+			uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK		0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD		word10
+		} request;
+		struct {
+			uint32_t eventag;
+		} response;
+	} u;
+	uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK	0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD	word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT        0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK         0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD         word10
+	struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT	0
+#define lpfc_mbx_del_fcf_tbl_count_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD		word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT	16
+#define lpfc_mbx_del_fcf_tbl_index_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD		word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS					0x0
+#define STATUS_FAILED 					0x1
+#define STATUS_ILLEGAL_REQUEST				0x2
+#define STATUS_ILLEGAL_FIELD				0x3
+#define STATUS_INSUFFICIENT_BUFFER 			0x4
+#define STATUS_UNAUTHORIZED_REQUEST			0x5
+#define STATUS_FLASHROM_SAVE_FAILED			0x17
+#define STATUS_FLASHROM_RESTORE_FAILED			0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED			0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 		0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM		0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM		0x1d
+#define STATUS_ASSERT_FAILED				0x1e
+#define STATUS_INVALID_SESSION				0x1f
+#define STATUS_INVALID_CONNECTION			0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT		0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH			0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID			0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND			0x26
+#define STATUS_FLASHROM_READ_FAILED			0x27
+#define STATUS_POLL_IOCTL_TIMEOUT			0x28
+#define STATUS_ERROR_ACITMAIN				0x2a
+#define STATUS_REBOOT_REQUIRED				0x2c
+#define STATUS_FCF_IN_USE				0x3a
+
+struct lpfc_mbx_sli4_config {
+	struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+	uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT		31
+#define lpfc_init_vfi_vr_MASK		0x00000001
+#define lpfc_init_vfi_vr_WORD		word1
+#define lpfc_init_vfi_vt_SHIFT		30
+#define lpfc_init_vfi_vt_MASK		0x00000001
+#define lpfc_init_vfi_vt_WORD		word1
+#define lpfc_init_vfi_vf_SHIFT		29
+#define lpfc_init_vfi_vf_MASK		0x00000001
+#define lpfc_init_vfi_vf_WORD		word1
+#define lpfc_init_vfi_vfi_SHIFT		0
+#define lpfc_init_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT	0
+#define lpfc_init_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD		word2
+	uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT		13
+#define lpfc_init_vfi_pri_MASK		0x00000007
+#define lpfc_init_vfi_pri_WORD		word3
+#define lpfc_init_vfi_vf_id_SHIFT	1
+#define lpfc_init_vfi_vf_id_MASK	0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD	word3
+	uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT	24
+#define lpfc_init_vfi_hop_count_MASK	0x000000FF
+#define lpfc_init_vfi_hop_count_WORD	word4
+};
+
+struct lpfc_mbx_reg_vfi {
+	uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT		28
+#define lpfc_reg_vfi_vp_MASK		0x00000001
+#define lpfc_reg_vfi_vp_WORD		word1
+#define lpfc_reg_vfi_vfi_SHIFT		0
+#define lpfc_reg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT		16
+#define lpfc_reg_vfi_vpi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD		word2
+#define lpfc_reg_vfi_fcfi_SHIFT		0
+#define lpfc_reg_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	struct ulp_bde64 bde;
+	uint32_t word8_rsvd;
+	uint32_t word9_rsvd;
+	uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT		0
+#define lpfc_reg_vfi_nport_id_MASK		0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD		word10
+};
+
+struct lpfc_mbx_init_vpi {
+	uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT		16
+#define lpfc_init_vpi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD		word1
+#define lpfc_init_vpi_vpi_SHIFT		0
+#define lpfc_init_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD		word1
+};
+
+struct lpfc_mbx_read_vpi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT	0
+#define lpfc_mbx_read_vpi_vnportid_MASK		0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT	0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD		word4
+#define lpfc_mbx_read_vpi_pb_SHIFT		15
+#define lpfc_mbx_read_vpi_pb_MASK		0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD		word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT	16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK	0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD	word4
+#define lpfc_mbx_read_vpi_ns_SHIFT		30
+#define lpfc_mbx_read_vpi_ns_MASK		0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD		word4
+#define lpfc_mbx_read_vpi_hl_SHIFT		31
+#define lpfc_mbx_read_vpi_hl_MASK		0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD		word4
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT		0
+#define lpfc_mbx_read_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_0_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD		word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_1_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD		word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT		16
+#define lpfc_mbx_read_vpi_mac_2_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD		word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT		24
+#define lpfc_mbx_read_vpi_mac_3_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_4_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD		word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_5_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD		word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT	16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK		0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD		word8
+#define lpfc_mbx_read_vpi_vv_SHIFT		28
+#define lpfc_mbx_read_vpi_vv_MASK		0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD		word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT	0
+#define lpfc_unreg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD		word2
+};
+
+struct lpfc_mbx_resume_rpi {
+	uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT	0
+#define lpfc_resume_rpi_rpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD	word1
+	uint32_t event_tag;
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT	0
+#define lpfc_resume_rpi_vpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD	word6
+#define lpfc_resume_rpi_vfi_SHIFT	16
+#define lpfc_resume_rpi_vfi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD	word6
+};
+
+#define REG_FCF_INVALID_QID	0xFFFF
+struct lpfc_mbx_reg_fcfi {
+	uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT	0
+#define lpfc_reg_fcfi_info_index_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD	word1
+#define lpfc_reg_fcfi_fcfi_SHIFT	16
+#define lpfc_reg_fcfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT	0
+#define lpfc_reg_fcfi_rq_id1_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD	word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT	16
+#define lpfc_reg_fcfi_rq_id0_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD	word2
+	uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT	0
+#define lpfc_reg_fcfi_rq_id3_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD	word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT	16
+#define lpfc_reg_fcfi_rq_id2_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD	word3
+	uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT	24
+#define lpfc_reg_fcfi_type_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD	word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT	16
+#define lpfc_reg_fcfi_type_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD	word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD	word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD	word4
+	uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT	24
+#define lpfc_reg_fcfi_type_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD	word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT	16
+#define lpfc_reg_fcfi_type_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD	word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD	word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD	word5
+	uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT	24
+#define lpfc_reg_fcfi_type_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD	word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT	16
+#define lpfc_reg_fcfi_type_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD	word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD	word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD	word6
+	uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT	24
+#define lpfc_reg_fcfi_type_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD	word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT	16
+#define lpfc_reg_fcfi_type_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD	word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD	word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD	word7
+	uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT		13
+#define lpfc_reg_fcfi_mam_MASK		0x00000003
+#define lpfc_reg_fcfi_mam_WORD		word8
+#define LPFC_MAM_BOTH		0	/* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA		1	/* Server Provided MAC Address */
+#define LPFC_MAM_FPMA		2	/* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT		12
+#define lpfc_reg_fcfi_vv_MASK		0x00000001
+#define lpfc_reg_fcfi_vv_WORD		word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT	0
+#define lpfc_reg_fcfi_vlan_tag_MASK	0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD	word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+	uint32_t word1_rsv;
+	uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT		0
+#define lpfc_unreg_fcfi_MASK		0x0000FFFF
+#define lpfc_unreg_fcfi_WORD		word2
+};
+
+struct lpfc_mbx_read_rev {
+	uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT  		16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK   		0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD   		word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT		20
+#define lpfc_mbx_rd_rev_fcoe_MASK		0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD		word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT		29
+#define lpfc_mbx_rd_rev_vpd_MASK		0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD		word1
+	uint32_t first_hw_rev;
+	uint32_t second_hw_rev;
+	uint32_t word4_rsvd;
+	uint32_t third_hw_rev;
+	uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT		0
+#define lpfc_mbx_rd_rev_fcph_low_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD		word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT		8
+#define lpfc_mbx_rd_rev_fcph_high_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD		word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT	16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD	word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT	24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD	word6
+	uint32_t word7_rsvd;
+	uint32_t fw_id_rev;
+	uint8_t  fw_name[16];
+	uint32_t ulp_fw_id_rev;
+	uint8_t  ulp_fw_name[16];
+	uint32_t word18_47_rsvd[30];
+	uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT		0
+#define lpfc_mbx_rd_rev_avail_len_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD		word48
+	uint32_t vpd_paddr_low;
+	uint32_t vpd_paddr_high;
+	uint32_t avail_vpd_len;
+	uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+	uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT		0
+#define lpfc_mbx_rd_conf_max_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD		word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT		8
+#define lpfc_mbx_rd_conf_init_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT	0
+#define lpfc_mbx_rd_conf_nport_did_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD		word2
+#define lpfc_mbx_rd_conf_topology_SHIFT		24
+#define lpfc_mbx_rd_conf_topology_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT		0
+#define lpfc_mbx_rd_conf_ao_MASK		0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD		word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT		8
+#define lpfc_mbx_rd_conf_bb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT		12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_mc_SHIFT		29
+#define lpfc_mbx_rd_conf_mc_MASK		0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD		word3
+	uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD		word4
+	uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_lp_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD		word5
+	uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_al_tov_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD		word8
+	uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT		0
+#define lpfc_mbx_rd_conf_lmt_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD		word9
+	uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT		0
+#define lpfc_mbx_rd_conf_max_alpa_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD		word10
+	uint32_t word11_rsvd;
+	uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT		0
+#define lpfc_mbx_rd_conf_xri_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD		word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT	16
+#define lpfc_mbx_rd_conf_xri_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD		word12
+	uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_rpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD		word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_rpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD		word13
+	uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_vpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD		word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_vpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD		word14
+	uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT         0
+#define lpfc_mbx_rd_conf_vfi_base_MASK          0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD          word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT        16
+#define lpfc_mbx_rd_conf_vfi_count_MASK         0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD         word15
+	uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT	0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD		word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK	0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD	word16
+	uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_rq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD		word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_eq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD		word17
+	uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_wq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD		word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_cq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD		word18
+};
+
+struct lpfc_mbx_request_features {
+	uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT		0
+#define lpfc_mbx_rq_ftr_qry_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD		word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 			0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES	0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER		0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES	0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
+#define MB_CQE_STATUS_DMA_FAILED		0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+	uint32_t word0;
+#define lpfc_mqe_status_SHIFT		16
+#define lpfc_mqe_status_MASK		0x0000FFFF
+#define lpfc_mqe_status_WORD		word0
+#define lpfc_mqe_command_SHIFT		8
+#define lpfc_mqe_command_MASK		0x000000FF
+#define lpfc_mqe_command_WORD		word0
+	union {
+		uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+		/* sli4 mailbox commands */
+		struct lpfc_mbx_sli4_config sli4_config;
+		struct lpfc_mbx_init_vfi init_vfi;
+		struct lpfc_mbx_reg_vfi reg_vfi;
+		struct lpfc_mbx_reg_vfi unreg_vfi;
+		struct lpfc_mbx_init_vpi init_vpi;
+		struct lpfc_mbx_resume_rpi resume_rpi;
+		struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+		struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+		struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+		struct lpfc_mbx_reg_fcfi reg_fcfi;
+		struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+		struct lpfc_mbx_mq_create mq_create;
+		struct lpfc_mbx_eq_create eq_create;
+		struct lpfc_mbx_cq_create cq_create;
+		struct lpfc_mbx_wq_create wq_create;
+		struct lpfc_mbx_rq_create rq_create;
+		struct lpfc_mbx_mq_destroy mq_destroy;
+		struct lpfc_mbx_eq_destroy eq_destroy;
+		struct lpfc_mbx_cq_destroy cq_destroy;
+		struct lpfc_mbx_wq_destroy wq_destroy;
+		struct lpfc_mbx_rq_destroy rq_destroy;
+		struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+		struct lpfc_mbx_nembed_cmd nembed_cmd;
+		struct lpfc_mbx_read_rev read_rev;
+		struct lpfc_mbx_read_vpi read_vpi;
+		struct lpfc_mbx_read_config rd_config;
+		struct lpfc_mbx_request_features req_ftrs;
+		struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+		struct lpfc_mbx_nop nop;
+	} un;
+};
+
+struct lpfc_mcqe {
+	uint32_t word0;
+#define lpfc_mcqe_status_SHIFT		0
+#define lpfc_mcqe_status_MASK		0x0000FFFF
+#define lpfc_mcqe_status_WORD		word0
+#define lpfc_mcqe_ext_status_SHIFT	16
+#define lpfc_mcqe_ext_status_MASK  	0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD 	word0
+	uint32_t mcqe_tag0;
+	uint32_t mcqe_tag1;
+	uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT	31
+#define lpfc_trailer_valid_MASK		0x00000001
+#define lpfc_trailer_valid_WORD		trailer
+#define lpfc_trailer_async_SHIFT	30
+#define lpfc_trailer_async_MASK		0x00000001
+#define lpfc_trailer_async_WORD		trailer
+#define lpfc_trailer_hpi_SHIFT		29
+#define lpfc_trailer_hpi_MASK		0x00000001
+#define lpfc_trailer_hpi_WORD		trailer
+#define lpfc_trailer_completed_SHIFT	28
+#define lpfc_trailer_completed_MASK	0x00000001
+#define lpfc_trailer_completed_WORD	trailer
+#define lpfc_trailer_consumed_SHIFT	27
+#define lpfc_trailer_consumed_MASK	0x00000001
+#define lpfc_trailer_consumed_WORD	trailer
+#define lpfc_trailer_type_SHIFT		16
+#define lpfc_trailer_type_MASK		0x000000FF
+#define lpfc_trailer_type_WORD		trailer
+#define lpfc_trailer_code_SHIFT		8
+#define lpfc_trailer_code_MASK		0x000000FF
+#define lpfc_trailer_code_WORD		trailer
+#define LPFC_TRAILER_CODE_LINK	0x1
+#define LPFC_TRAILER_CODE_FCOE	0x2
+#define LPFC_TRAILER_CODE_DCBX	0x3
+};
+
+struct lpfc_acqe_link {
+	uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT		24
+#define lpfc_acqe_link_speed_MASK		0x000000FF
+#define lpfc_acqe_link_speed_WORD		word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO		0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS		0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS		0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS		0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS		0x4
+#define lpfc_acqe_link_duplex_SHIFT		16
+#define lpfc_acqe_link_duplex_MASK		0x000000FF
+#define lpfc_acqe_link_duplex_WORD		word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE		0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF		0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL		0x2
+#define lpfc_acqe_link_status_SHIFT		8
+#define lpfc_acqe_link_status_MASK		0x000000FF
+#define lpfc_acqe_link_status_WORD		word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN		0x0
+#define LPFC_ASYNC_LINK_STATUS_UP		0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN	0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP	0x3
+#define lpfc_acqe_link_physical_SHIFT		0
+#define lpfc_acqe_link_physical_MASK		0x000000FF
+#define lpfc_acqe_link_physical_WORD		word0
+#define LPFC_ASYNC_LINK_PORT_A			0x0
+#define LPFC_ASYNC_LINK_PORT_B			0x1
+	uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT	0
+#define lpfc_acqe_link_fault_MASK	0x000000FF
+#define lpfc_acqe_link_fault_WORD	word1
+#define LPFC_ASYNC_LINK_FAULT_NONE	0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL	0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE	0x2
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+	uint32_t fcf_index;
+	uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT		0
+#define lpfc_acqe_fcoe_fcf_count_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD		word1
+#define lpfc_acqe_fcoe_event_type_SHIFT		16
+#define lpfc_acqe_fcoe_event_type_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD		word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF		0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL	0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD		0x3
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+	uint32_t tlv_ttl;
+	uint32_t reserved;
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+	struct lpfc_mqe mqe;
+	struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+	uint32_t word6;
+#define wqe_xri_SHIFT         0
+#define wqe_xri_MASK          0x0000FFFF
+#define wqe_xri_WORD          word6
+#define wqe_ctxt_tag_SHIFT    16
+#define wqe_ctxt_tag_MASK     0x0000FFFF
+#define wqe_ctxt_tag_WORD     word6
+	uint32_t word7;
+#define wqe_ct_SHIFT          2
+#define wqe_ct_MASK           0x00000003
+#define wqe_ct_WORD           word7
+#define wqe_status_SHIFT      4
+#define wqe_status_MASK       0x0000000f
+#define wqe_status_WORD       word7
+#define wqe_cmnd_SHIFT        8
+#define wqe_cmnd_MASK         0x000000ff
+#define wqe_cmnd_WORD         word7
+#define wqe_class_SHIFT       16
+#define wqe_class_MASK        0x00000007
+#define wqe_class_WORD        word7
+#define wqe_pu_SHIFT          20
+#define wqe_pu_MASK           0x00000003
+#define wqe_pu_WORD           word7
+#define wqe_erp_SHIFT         22
+#define wqe_erp_MASK          0x00000001
+#define wqe_erp_WORD          word7
+#define wqe_lnk_SHIFT         23
+#define wqe_lnk_MASK          0x00000001
+#define wqe_lnk_WORD          word7
+#define wqe_tmo_SHIFT         24
+#define wqe_tmo_MASK          0x000000ff
+#define wqe_tmo_WORD          word7
+	uint32_t abort_tag; /* word 8 in WQE */
+	uint32_t word9;
+#define wqe_reqtag_SHIFT      0
+#define wqe_reqtag_MASK       0x0000FFFF
+#define wqe_reqtag_WORD       word9
+#define wqe_rcvoxid_SHIFT     16
+#define wqe_rcvoxid_MASK       0x0000FFFF
+#define wqe_rcvoxid_WORD       word9
+	uint32_t word10;
+#define wqe_pri_SHIFT         16
+#define wqe_pri_MASK          0x00000007
+#define wqe_pri_WORD          word10
+#define wqe_pv_SHIFT          19
+#define wqe_pv_MASK           0x00000001
+#define wqe_pv_WORD           word10
+#define wqe_xc_SHIFT          21
+#define wqe_xc_MASK           0x00000001
+#define wqe_xc_WORD           word10
+#define wqe_ccpe_SHIFT        23
+#define wqe_ccpe_MASK         0x00000001
+#define wqe_ccpe_WORD         word10
+#define wqe_ccp_SHIFT         24
+#define wqe_ccp_MASK         0x000000ff
+#define wqe_ccp_WORD         word10
+	uint32_t word11;
+#define wqe_cmd_type_SHIFT  0
+#define wqe_cmd_type_MASK   0x0000000f
+#define wqe_cmd_type_WORD   word11
+#define wqe_wqec_SHIFT      7
+#define wqe_wqec_MASK       0x00000001
+#define wqe_wqec_WORD       word11
+#define wqe_cqid_SHIFT      16
+#define wqe_cqid_MASK       0x000003ff
+#define wqe_cqid_WORD       word11
+};
+
+struct wqe_did {
+	uint32_t word5;
+#define wqe_els_did_SHIFT         0
+#define wqe_els_did_MASK          0x00FFFFFF
+#define wqe_els_did_WORD          word5
+#define wqe_xmit_bls_ar_SHIFT         30
+#define wqe_xmit_bls_ar_MASK          0x00000001
+#define wqe_xmit_bls_ar_WORD          word5
+#define wqe_xmit_bls_xo_SHIFT         31
+#define wqe_xmit_bls_xo_MASK          0x00000001
+#define wqe_xmit_bls_xo_WORD          word5
+};
+
+struct els_request64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t word4;
+#define els_req64_sid_SHIFT         0
+#define els_req64_sid_MASK          0x00FFFFFF
+#define els_req64_sid_WORD          word4
+#define els_req64_sp_SHIFT          24
+#define els_req64_sp_MASK           0x00000001
+#define els_req64_sp_WORD           word4
+#define els_req64_vf_SHIFT          25
+#define els_req64_vf_MASK           0x00000001
+#define els_req64_vf_WORD           word4
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t word12;
+#define els_req64_vfid_SHIFT        1
+#define els_req64_vfid_MASK         0x00000FFF
+#define els_req64_vfid_WORD         word12
+#define els_req64_pri_SHIFT         13
+#define els_req64_pri_MASK          0x00000007
+#define els_req64_pri_WORD          word12
+	uint32_t word13;
+#define els_req64_hopcnt_SHIFT      24
+#define els_req64_hopcnt_MASK       0x000000ff
+#define els_req64_hopcnt_WORD       word13
+	uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t rsvd3;
+	uint32_t rsvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+	uint32_t payload0;
+	uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT  0
+#define xmit_bls_rsp64_rxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD   word1
+#define xmit_bls_rsp64_oxid_SHIFT  16
+#define xmit_bls_rsp64_oxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD   word1
+	uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT  0
+#define xmit_bls_rsp64_seqcntlo_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD   word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT  16
+#define xmit_bls_rsp64_seqcnthi_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD   word2
+	uint32_t rsrvd3;
+	uint32_t rsrvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+	uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK  0x000000001
+#define wqe_si_WORD  word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK  0x000000001
+#define wqe_la_WORD  word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK  0x000000001
+#define wqe_ls_WORD  word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK  0x0000000ff
+#define wqe_dfctl_WORD  word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK  0x0000000ff
+#define wqe_type_WORD  word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK  0x0000000ff
+#define wqe_rctl_WORD  word5
+};
+
+struct xmit_seq64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_offset;
+	uint32_t relative_offset;
+	struct wqe_rctl_dfctl wge_ctl;
+	struct wqe_common wqe_com; /* words 6-11 */
+	/* Note: word10 different REVISIT */
+	uint32_t xmit_len;
+	uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_len;
+	uint32_t rsvd4;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t command_len;
+	uint32_t payload_len;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+	uint32_t rsrvd[5];           /* words 0-4 */
+	struct wqe_did	wqe_dest;  /* word 5 */
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+	uint32_t rsrvd[3];
+	uint32_t word3;
+#define	abort_cmd_ia_SHIFT  0
+#define	abort_cmd_ia_MASK  0x000000001
+#define	abort_cmd_ia_WORD  word3
+#define	abort_cmd_criteria_SHIFT  8
+#define	abort_cmd_criteria_MASK  0x0000000ff
+#define	abort_cmd_criteria_WORD  word3
+	uint32_t rsrvd4;
+	uint32_t rsrvd5;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t total_xfer_len;
+	uint32_t initial_xfer_len;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;          /* word 3 */
+	uint32_t total_xfer_len;       /* word 4 */
+	uint32_t rsrvd5;               /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+	struct ulp_bde64 bde;	 /* words 0-2 */
+	uint32_t rsrvd[3];             /* words 3-5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+	uint32_t words[16];
+	struct lpfc_wqe_generic generic;
+	struct fcp_icmnd64_wqe fcp_icmd;
+	struct fcp_iread64_wqe fcp_iread;
+	struct fcp_iwrite64_wqe fcp_iwrite;
+	struct abort_cmd_wqe abort_cmd;
+	struct create_xri_wqe create_xri;
+	struct xmit_bcast64_wqe xmit_bcast64;
+	struct xmit_seq64_wqe xmit_sequence;
+	struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+	struct xmit_els_rsp64_wqe xmit_els_rsp;
+	struct els_request64_wqe els_req;
+	struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 86d1bdcbf2d..2f5907f92ee 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -34,8 +34,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -51,9 +53,23 @@ char *_dump_buf_dif;
 unsigned long _dump_buf_dif_order;
 spinlock_t _dump_buf_lock;
 
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
 static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
 
 static struct scsi_transport_template *lpfc_transport_template = NULL;
 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -92,7 +108,7 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
 		return -ENOMEM;
 	}
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	phba->link_state = LPFC_INIT_MBX_CMDS;
 
 	if (lpfc_is_LC_HBA(phba->pcidev->device)) {
@@ -205,6 +221,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
 					mb->mbxCommand, mb->mbxStatus);
 			mb->un.varDmp.word_cnt = 0;
 		}
+		/* dump mem may return a zero when finished or we got a
+		 * mailbox error, either way we are done.
+		 */
+		if (mb->un.varDmp.word_cnt == 0)
+			break;
 		if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
 			mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
 		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
@@ -233,7 +254,7 @@ out_free_mbox:
 static void
 lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 {
-	if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
+	if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
 		phba->temp_sensor_support = 1;
 	else
 		phba->temp_sensor_support = 0;
@@ -260,7 +281,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 	/* character array used for decoding dist type. */
 	char dist_char[] = "nabx";
 
-	if (pmboxq->mb.mbxStatus != MBX_SUCCESS) {
+	if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
 		mempool_free(pmboxq, phba->mbox_mem_pool);
 		return;
 	}
@@ -268,7 +289,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 	prg = (struct prog_id *) &prog_id_word;
 
 	/* word 7 contain option rom version */
-	prog_id_word = pmboxq->mb.un.varWords[7];
+	prog_id_word = pmboxq->u.mb.un.varWords[7];
 
 	/* Decode the Option rom version word to a readable string */
 	if (prg->dist < 4)
@@ -325,7 +346,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 		phba->link_state = LPFC_HBA_ERROR;
 		return -ENOMEM;
 	}
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	/* Get login parameters for NID.  */
 	lpfc_read_sparam(phba, pmb, 0);
@@ -364,6 +385,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	/* Update the fc_host data structures with new wwn. */
 	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
 	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+	fc_host_max_npiv_vports(shost) = phba->max_vpi;
 
 	/* If no serial number in VPD data, use low 6 bytes of WWNN */
 	/* This should be consolidated into parse_vpd ? - mr */
@@ -460,17 +482,18 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
 					"0352 Config MSI mailbox command "
 					"failed, mbxCmd x%x, mbxStatus x%x\n",
-					pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+					pmb->u.mb.mbxCommand,
+					pmb->u.mb.mbxStatus);
 			mempool_free(pmb, phba->mbox_mem_pool);
 			return -EIO;
 		}
 	}
 
+	spin_lock_irq(&phba->hbalock);
 	/* Initialize ERATT handling flag */
 	phba->hba_flag &= ~HBA_ERATT_HANDLED;
 
 	/* Enable appropriate host interrupts */
-	spin_lock_irq(&phba->hbalock);
 	status = readl(phba->HCregaddr);
 	status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
 	if (psli->num_rings > 0)
@@ -571,16 +594,20 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
 {
 	struct lpfc_vport **vports;
 	int i;
-	/* Disable interrupts */
-	writel(0, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
+
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		/* Disable interrupts */
+		writel(0, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
 
 	if (phba->pport->load_flag & FC_UNLOADING)
 		lpfc_cleanup_discovery_resources(phba->pport);
 	else {
 		vports = lpfc_create_vport_work_array(phba);
 		if (vports != NULL)
-			for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+			for (i = 0; i <= phba->max_vports &&
+				vports[i] != NULL; i++)
 				lpfc_cleanup_discovery_resources(vports[i]);
 		lpfc_destroy_vport_work_array(phba, vports);
 	}
@@ -588,7 +615,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
  * @phba: pointer to lpfc HBA data structure.
  *
  * This routine will do uninitialization after the HBA is reset when bring
@@ -598,8 +625,8 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
  *   0 - sucess.
  *   Any other value - error.
  **/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
@@ -642,6 +669,77 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
 
 	return 0;
 }
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb, *psb_next;
+	LIST_HEAD(aborts);
+	int ret;
+	unsigned long iflag = 0;
+	ret = lpfc_hba_down_post_s3(phba);
+	if (ret)
+		return ret;
+	/* At this point in time the HBA is either reset or DOA. Either
+	 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+	 * on the lpfc_sgl_list so that it can either be freed if the
+	 * driver is unloading or reposted if the driver is restarting
+	 * the port.
+	 */
+	spin_lock_irq(&phba->hbalock);  /* required for lpfc_sgl_list and */
+					/* scsl_buf_list */
+	/* abts_sgl_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+			&phba->sli4_hba.lpfc_sgl_list);
+	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+	/* abts_scsi_buf_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+			&aborts);
+	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+		psb->pCmd = NULL;
+		psb->status = IOSTAT_SUCCESS;
+	}
+	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+	list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+	return (*phba->lpfc_hba_down_post)(phba);
+}
 
 /**
  * lpfc_hb_timeout - The HBA-timer timeout handler
@@ -809,7 +907,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 					"taking this port offline.\n");
 
 			spin_lock_irq(&phba->hbalock);
-			psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+			psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 			spin_unlock_irq(&phba->hbalock);
 
 			lpfc_offline_prep(phba);
@@ -834,13 +932,15 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 	struct lpfc_sli   *psli = &phba->sli;
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 	lpfc_offline_prep(phba);
 
 	lpfc_offline(phba);
 	lpfc_reset_barrier(phba);
+	spin_lock_irq(&phba->hbalock);
 	lpfc_sli_brdreset(phba);
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_hba_down_post(phba);
 	lpfc_sli_brdready(phba, HS_MBRDY);
 	lpfc_unblock_mgmt_io(phba);
@@ -849,6 +949,25 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli4_brdreset(phba);
+	lpfc_hba_down_post(phba);
+	lpfc_sli4_post_status_check(phba);
+	lpfc_unblock_mgmt_io(phba);
+	phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
  * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -864,6 +983,16 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	struct lpfc_sli_ring  *pring;
 	struct lpfc_sli *psli = &phba->sli;
 
+	/* If the pci channel is offline, ignore possible errors,
+	 * since we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev)) {
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~DEFER_ERATT;
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 		"0479 Deferred Adapter Hardware Error "
 		"Data: x%x x%x x%x\n",
@@ -871,7 +1000,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 		phba->work_status[0], phba->work_status[1]);
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 
@@ -909,13 +1038,30 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
 		phba->work_hs = old_host_status & ~HS_FFER1;
 
+	spin_lock_irq(&phba->hbalock);
 	phba->hba_flag &= ~DEFER_ERATT;
+	spin_unlock_irq(&phba->hbalock);
 	phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
 	phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
 }
 
+static void
+lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
+{
+	struct lpfc_board_event_header board_event;
+	struct Scsi_Host *shost;
+
+	board_event.event_type = FC_REG_BOARD_EVENT;
+	board_event.subcategory = LPFC_EVENT_PORTINTERR;
+	shost = lpfc_shost_from_vport(phba->pport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(board_event),
+				  (char *) &board_event,
+				  LPFC_NL_VENDOR_ID);
+}
+
 /**
- * lpfc_handle_eratt - The HBA hardware error handler
+ * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to handle the following HBA hardware error
@@ -924,8 +1070,8 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
  * 2 - DMA ring index out of range
  * 3 - Mailbox command came back as unknown
  **/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
+static void
+lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_sli   *psli = &phba->sli;
@@ -934,24 +1080,23 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 	unsigned long temperature;
 	struct temp_event temp_event_data;
 	struct Scsi_Host  *shost;
-	struct lpfc_board_event_header board_event;
 
 	/* If the pci channel is offline, ignore possible errors,
-	 * since we cannot communicate with the pci card anyway. */
-	if (pci_channel_offline(phba->pcidev))
+	 * since we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev)) {
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~DEFER_ERATT;
+		spin_unlock_irq(&phba->hbalock);
 		return;
+	}
+
 	/* If resets are disabled then leave the HBA alone and return */
 	if (!phba->cfg_enable_hba_reset)
 		return;
 
 	/* Send an internal error event to mgmt application */
-	board_event.event_type = FC_REG_BOARD_EVENT;
-	board_event.subcategory = LPFC_EVENT_PORTINTERR;
-	shost = lpfc_shost_from_vport(phba->pport);
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-				  sizeof(board_event),
-				  (char *) &board_event,
-				  LPFC_NL_VENDOR_ID);
+	lpfc_board_errevt_to_mgmt(phba);
 
 	if (phba->hba_flag & DEFER_ERATT)
 		lpfc_handle_deferred_eratt(phba);
@@ -965,7 +1110,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 				phba->work_status[0], phba->work_status[1]);
 
 		spin_lock_irq(&phba->hbalock);
-		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+		psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 		spin_unlock_irq(&phba->hbalock);
 
 		/*
@@ -1037,6 +1182,65 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	uint32_t event_data;
+	struct Scsi_Host *shost;
+
+	/* If the pci channel is offline, ignore possible errors, since
+	 * we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev))
+		return;
+	/* If resets are disabled then leave the HBA alone and return */
+	if (!phba->cfg_enable_hba_reset)
+		return;
+
+	/* Send an internal error event to mgmt application */
+	lpfc_board_errevt_to_mgmt(phba);
+
+	/* For now, the actual action for SLI4 device handling is not
+	 * specified yet, just treated it as adaptor hardware failure
+	 */
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+			phba->work_status[0], phba->work_status[1]);
+
+	event_data = FC_REG_DUMP_EVENT;
+	shost = lpfc_shost_from_vport(vport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(event_data), (char *) &event_data,
+				  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+	lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+	(*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
  * lpfc_handle_latt - The HBA link event handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -1137,7 +1341,7 @@ lpfc_handle_latt_err_exit:
  *   0 - pointer to the VPD passed in is NULL
  *   1 - success
  **/
-static int
+int
 lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
 {
 	uint8_t lenlo, lenhi;
@@ -1292,6 +1496,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 	uint16_t dev_id = phba->pcidev->device;
 	int max_speed;
 	int GE = 0;
+	int oneConnect = 0; /* default is not a oneConnect */
 	struct {
 		char * name;
 		int    max_speed;
@@ -1437,6 +1642,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 	case PCI_DEVICE_ID_PROTEUS_S:
 		m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
 		break;
+	case PCI_DEVICE_ID_TIGERSHARK:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+		break;
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+		break;
 	default:
 		m = (typeof(m)){ NULL };
 		break;
@@ -1444,13 +1657,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 
 	if (mdp && mdp[0] == '\0')
 		snprintf(mdp, 79,"%s", m.name);
-	if (descp && descp[0] == '\0')
-		snprintf(descp, 255,
-			"Emulex %s %d%s %s %s",
-			m.name, m.max_speed,
-			(GE) ? "GE" : "Gb",
-			m.bus,
-			(GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+	/* oneConnect hba requires special processing, they are all initiators
+	 * and we put the port number on the end
+	 */
+	if (descp && descp[0] == '\0') {
+		if (oneConnect)
+			snprintf(descp, 255,
+				"Emulex OneConnect %s, FCoE Initiator, Port %s",
+				m.name,
+				phba->Port);
+		else
+			snprintf(descp, 255,
+				"Emulex %s %d%s %s %s",
+				m.name, m.max_speed,
+				(GE) ? "GE" : "Gb",
+				m.bus,
+				(GE) ? "FCoE Adapter" :
+					"Fibre Channel Adapter");
+	}
 }
 
 /**
@@ -1533,7 +1757,8 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
 		icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
 		icmd->ulpLe = 1;
 
-		if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
+		if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
+		    IOCB_ERROR) {
 			lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
 			kfree(mp1);
 			cnt++;
@@ -1761,7 +1986,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
 	 * Lets wait for this to happen, if needed.
 	 */
 	while (!list_empty(&vport->fc_nodes)) {
-
 		if (i++ > 3000) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
 				"0233 Nodelist not empty\n");
@@ -1782,7 +2006,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
 		/* Wait for any activity on ndlps to settle */
 		msleep(10);
 	}
-	return;
 }
 
 /**
@@ -1803,22 +2026,36 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
+ * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine stops all the timers associated with a HBA. This function is
  * invoked before either putting a HBA offline or unloading the driver.
  **/
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
+void
+lpfc_stop_hba_timers(struct lpfc_hba *phba)
 {
-	del_timer_sync(&phba->fcp_poll_timer);
 	lpfc_stop_vport_timers(phba->pport);
 	del_timer_sync(&phba->sli.mbox_tmo);
 	del_timer_sync(&phba->fabric_block_timer);
-	phba->hb_outstanding = 0;
-	del_timer_sync(&phba->hb_tmofunc);
 	del_timer_sync(&phba->eratt_poll);
+	del_timer_sync(&phba->hb_tmofunc);
+	phba->hb_outstanding = 0;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		/* Stop any LightPulse device specific driver timers */
+		del_timer_sync(&phba->fcp_poll_timer);
+		break;
+	case LPFC_PCI_DEV_OC:
+		/* Stop any OneConnect device sepcific driver timers */
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0297 Invalid device group (x%x)\n",
+				phba->pci_dev_grp);
+		break;
+	}
 	return;
 }
 
@@ -1878,14 +2115,21 @@ lpfc_online(struct lpfc_hba *phba)
 		return 1;
 	}
 
-	if (lpfc_sli_hba_setup(phba)) {	/* Initialize the HBA */
-		lpfc_unblock_mgmt_io(phba);
-		return 1;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
+	} else {
+		if (lpfc_sli_hba_setup(phba)) {	/* Initialize SLI2/SLI3 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
 	}
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
@@ -1947,11 +2191,12 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 	/* Issue an unreg_login to all nodes on all vports */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL) {
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 
 			if (vports[i]->load_flag & FC_UNLOADING)
 				continue;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
 			shost =	lpfc_shost_from_vport(vports[i]);
 			list_for_each_entry_safe(ndlp, next_ndlp,
 						 &vports[i]->fc_nodes,
@@ -1975,7 +2220,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 	}
 	lpfc_destroy_vport_work_array(phba, vports);
 
-	lpfc_sli_flush_mbox_queue(phba);
+	lpfc_sli_mbox_sys_shutdown(phba);
 }
 
 /**
@@ -1996,11 +2241,11 @@ lpfc_offline(struct lpfc_hba *phba)
 	if (phba->pport->fc_flag & FC_OFFLINE_MODE)
 		return;
 
-	/* stop all timers associated with this hba */
-	lpfc_stop_phba_timers(phba);
+	/* stop port and all timers associated with this hba */
+	lpfc_stop_port(phba);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_stop_vport_timers(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
 	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2013,7 +2258,7 @@ lpfc_offline(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->work_port_events = 0;
@@ -2106,6 +2351,10 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	shost->max_lun = vport->cfg_max_luns;
 	shost->this_id = -1;
 	shost->max_cmd_len = 16;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+		shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+	}
 
 	/*
 	 * Set initial can_queue value since 0 is no longer supported and
@@ -2123,6 +2372,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 
 	/* Initialize all internally managed lists. */
 	INIT_LIST_HEAD(&vport->fc_nodes);
+	INIT_LIST_HEAD(&vport->rcv_buffer_list);
 	spin_lock_init(&vport->work_port_lock);
 
 	init_timer(&vport->fc_disctmo);
@@ -2314,15 +2564,3461 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s3(struct lpfc_hba *phba)
+{
+	/* Clear all interrupt enable conditions */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	/* Clear all pending interrupts */
+	writel(0xffffffff, phba->HAregaddr);
+	readl(phba->HAregaddr); /* flush */
+
+	/* Reset some HBA SLI setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_stop_port_s4 - Stop SLI4 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
+{
+	/* Reset some HBA SLI4 setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+	phba->sli4_hba.intr_enable = 0;
+	/* Hard clear it for now, shall have more graceful way to wait later */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
+
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+	phba->lpfc_stop_port(phba);
+}
+
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port.  This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+	uint32_t mbox_tmo, req_len;
+	uint32_t shdr_status, shdr_add_status;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2020 Failed to allocate mbox for ADD_FCF cmd\n");
+		return;
+	}
+
+	req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr);
+	rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			      LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+			      req_len, LPFC_SLI4_MBX_EMBED);
+	/*
+	 * In phase 1, there is a single FCF index, 0.  In phase2, the driver
+	 * supports multiple FCF indices.
+	 */
+	del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+	bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+	bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+	       phba->fcf.fcf_indx);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	}
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &del_fcf_record->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &del_fcf_record->header.cfg_shdr.response);
+	if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2516 DEL FCF of default FCF Index failed "
+				"mbx status x%x, status x%x add_status x%x\n",
+				rc, shdr_status, shdr_add_status);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+			   struct lpfc_acqe_link *acqe_link)
+{
+	uint16_t latt_fault;
+
+	switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+	case LPFC_ASYNC_LINK_FAULT_NONE:
+	case LPFC_ASYNC_LINK_FAULT_LOCAL:
+	case LPFC_ASYNC_LINK_FAULT_REMOTE:
+		latt_fault = 0;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0398 Invalid link fault code: x%x\n",
+				bf_get(lpfc_acqe_link_fault, acqe_link));
+		latt_fault = MBXERR_ERROR;
+		break;
+	}
+	return latt_fault;
+}
+
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+			  struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t att_type;
+
+	switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+	case LPFC_ASYNC_LINK_STATUS_DOWN:
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+		att_type = AT_LINK_DOWN;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_UP:
+		/* Ignore physical link up events - wait for logical link up */
+		att_type = AT_RESERVED;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+		att_type = AT_LINK_UP;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0399 Invalid link attention type: x%x\n",
+				bf_get(lpfc_acqe_link_status, acqe_link));
+		att_type = AT_RESERVED;
+		break;
+	}
+	return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+				struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t link_speed;
+
+	switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+	case LPFC_ASYNC_LINK_SPEED_ZERO:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_100MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_1GBPS:
+		link_speed = LA_1GHZ_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10GBPS:
+		link_speed = LA_10GHZ_LINK;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0483 Invalid link-attention link speed: x%x\n",
+				bf_get(lpfc_acqe_link_speed, acqe_link));
+		link_speed = LA_UNKNW_LINK;
+		break;
+	}
+	return link_speed;
+}
+
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_link *acqe_link)
+{
+	struct lpfc_dmabuf *mp;
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *mb;
+	READ_LA_VAR *la;
+	uint8_t att_type;
+
+	att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+	if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+		return;
+	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0395 The mboxq allocation failed\n");
+		return;
+	}
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!mp) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0396 The lpfc_dmabuf allocation failed\n");
+		goto out_free_pmb;
+	}
+	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+	if (!mp->virt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0397 The mbuf allocation failed\n");
+		goto out_free_dmabuf;
+	}
+
+	/* Cleanup any outstanding ELS commands */
+	lpfc_els_flush_all_cmd(phba);
+
+	/* Block ELS IOCBs until we have done process link event */
+	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+	/* Update link event statistics */
+	phba->sli.slistat.link_event++;
+
+	/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+	lpfc_read_la(phba, pmb, mp);
+	pmb->vport = phba->pport;
+
+	/* Parse and translate status field */
+	mb = &pmb->u.mb;
+	mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+	/* Parse and translate link attention fields */
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+	la->eventTag = acqe_link->event_tag;
+	la->attType = att_type;
+	la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+	/* Fake the the following irrelvant fields */
+	la->topology = TOPOLOGY_PT_PT;
+	la->granted_AL_PA = 0;
+	la->il = 0;
+	la->pb = 0;
+	la->fa = 0;
+	la->mm = 0;
+
+	/* Keep the link status for extra SLI4 state machine reference */
+	phba->sli4_hba.link_state.speed =
+				bf_get(lpfc_acqe_link_speed, acqe_link);
+	phba->sli4_hba.link_state.duplex =
+				bf_get(lpfc_acqe_link_duplex, acqe_link);
+	phba->sli4_hba.link_state.status =
+				bf_get(lpfc_acqe_link_status, acqe_link);
+	phba->sli4_hba.link_state.physical =
+				bf_get(lpfc_acqe_link_physical, acqe_link);
+	phba->sli4_hba.link_state.fault =
+				bf_get(lpfc_acqe_link_fault, acqe_link);
+
+	/* Invoke the lpfc_handle_latt mailbox command callback function */
+	lpfc_mbx_cmpl_read_la(phba, pmb);
+
+	return;
+
+out_free_dmabuf:
+	kfree(mp);
+out_free_pmb:
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous fcoe event.
+ **/
+static void
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_fcoe *acqe_fcoe)
+{
+	uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+	int rc;
+
+	switch (event_type) {
+	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2546 New FCF found index 0x%x tag 0x%x \n",
+			acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/*
+		 * If the current FCF is in discovered state,
+		 * do nothing.
+		 */
+		spin_lock_irq(&phba->hbalock);
+		if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+			spin_unlock_irq(&phba->hbalock);
+			break;
+		}
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Read the FCF table and re-discover SAN. */
+		rc = lpfc_sli4_read_fcf_record(phba,
+			LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+				"2547 Read FCF record failed 0x%x\n",
+				rc);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2548 FCF Table full count 0x%x tag 0x%x \n",
+			bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+			acqe_fcoe->event_tag);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2549 FCF disconnected fron network index 0x%x"
+			" tag 0x%x \n", acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/* If the event is not for currently used fcf do nothing */
+		if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+			break;
+		/*
+		 * Currently, driver support only one FCF - so treat this as
+		 * a link down.
+		 */
+		lpfc_linkdown(phba);
+		/* Unregister FCF if no devices connected to it */
+		lpfc_unregister_unused_fcf(phba);
+		break;
+
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0288 Unknown FCoE event type 0x%x event tag "
+			"0x%x\n", event_type, acqe_fcoe->event_tag);
+		break;
+	}
+}
+
+/**
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_dcbx *acqe_dcbx)
+{
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0290 The SLI4 DCBX asynchronous event is not "
+			"handled yet\n");
+}
+
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the async event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ASYNC_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the async events */
+	while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Process the asynchronous event */
+		switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+		case LPFC_TRAILER_CODE_LINK:
+			lpfc_sli4_async_link_evt(phba,
+						 &cq_event->cqe.acqe_link);
+			break;
+		case LPFC_TRAILER_CODE_FCOE:
+			lpfc_sli4_async_fcoe_evt(phba,
+						 &cq_event->cqe.acqe_fcoe);
+			break;
+		case LPFC_TRAILER_CODE_DCBX:
+			lpfc_sli4_async_dcbx_evt(phba,
+						 &cq_event->cqe.acqe_dcbx);
+			break;
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"1804 Invalid asynchrous event code: "
+					"x%x\n", bf_get(lpfc_trailer_code,
+					&cq_event->cqe.mcqe_cmpl));
+			break;
+		}
+		/* Free the completion event processed to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
+ * @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+	int rc;
+
+	/* Set up lpfc PCI-device group */
+	phba->pci_dev_grp = dev_grp;
+
+	/* The LPFC_PCI_DEV_OC uses SLI4 */
+	if (dev_grp == LPFC_PCI_DEV_OC)
+		phba->sli_rev = LPFC_SLI_REV4;
+
+	/* Set up device INIT API function jump table */
+	rc = lpfc_init_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SCSI API function jump table */
+	rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SLI API function jump table */
+	rc = lpfc_sli_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up MBOX API function jump table */
+	rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
+ * lpfc_log_intr_mode - Log the active interrupt mode
+ * @phba: pointer to lpfc hba data structure.
+ * @intr_mode: active interrupt mode adopted.
+ *
+ * This routine it invoked to log the currently used active interrupt mode
+ * to the device.
+ **/
+static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+{
+	switch (intr_mode) {
+	case 0:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0470 Enable INTx interrupt mode.\n");
+		break;
+	case 1:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0481 Enabled MSI interrupt mode.\n");
+		break;
+	case 2:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0480 Enabled MSI-X interrupt mode.\n");
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0482 Illegal interrupt mode.\n");
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_enable_pci_dev - Enable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the PCI device that is common to all
+ * PCI devices.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_enable_pci_dev(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	int bars;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		goto out_error;
+	else
+		pdev = phba->pcidev;
+	/* Select PCI BARs */
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	/* Enable PCI device */
+	if (pci_enable_device_mem(pdev))
+		goto out_error;
+	/* Request PCI resource for the device */
+	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+		goto out_disable_device;
+	/* Set up device as PCI master and save state for EEH */
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+	pci_save_state(pdev);
+
+	return 0;
+
+out_disable_device:
+	pci_disable_device(pdev);
+out_error:
+	return -ENODEV;
+}
+
+/**
+ * lpfc_disable_pci_dev - Disable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the PCI device that is common to all
+ * PCI devices.
+ **/
+static void
+lpfc_disable_pci_dev(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	int bars;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+	/* Select PCI BARs */
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	/* Release PCI resource and disable PCI device */
+	pci_release_selected_regions(pdev, bars);
+	pci_disable_device(pdev);
+	/* Null out PCI private reference to driver */
+	pci_set_drvdata(pdev, NULL);
+
+	return;
+}
+
+/**
+ * lpfc_reset_hba - Reset a hba
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to reset a hba device. It brings the HBA
+ * offline, performs a board restart, and then brings the board back
+ * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
+ * on outstanding mailbox commands.
+ **/
+void
+lpfc_reset_hba(struct lpfc_hba *phba)
+{
+	/* If resets are disabled then set error state and return. */
+	if (!phba->cfg_enable_hba_reset) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return;
+	}
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli_brdrestart(phba);
+	lpfc_online(phba);
+	lpfc_unblock_mgmt_io(phba);
+}
+
+/**
+ * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-3 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* FCP polling mode timer */
+	init_timer(&phba->fcp_poll_timer);
+	phba->fcp_poll_timer.function = lpfc_poll_timeout;
+	phba->fcp_poll_timer.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+
+	/* Host attention work mask setup */
+	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
+	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 */
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+		sizeof(struct fcp_rsp) +
+			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+	if (phba->cfg_enable_bg) {
+		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+		phba->cfg_sg_dma_buf_size +=
+			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+	}
+
+	/* Also reinitialize the host templates with new values. */
+	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after config_port mbox */
+	phba->max_vports = 0;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc HBAs.
+	 */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-3 HBA device it attached to.
+ **/
+static void
+lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
+{
+	/* Free device driver memory allocated */
+	lpfc_mem_free_all(phba);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	int rc;
+	int i, hbq_count;
+
+	/* Before proceed, wait for POST done and device ready */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (rc)
+		return -ENODEV;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+	/*
+	 * We need to do a READ_CONFIG mailbox command here before
+	 * calling lpfc_get_cfgparam. For VFs this will report the
+	 * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+	 * All of the resources allocated
+	 * for this Port are tied to these values.
+	 */
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after the read_config mbox */
+	phba->max_vports = 0;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 * To insure that the scsi sgl does not cross a 4k page boundary only
+	 * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+	 * Table of sgl sizes and seg_cnt:
+	 * sgl size, 	sg_seg_cnt	total seg
+	 * 1k		50		52
+	 * 2k		114		116
+	 * 4k		242		244
+	 * 8k		498		500
+	 * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+	 * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+	 * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+	 * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+	 */
+	if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+		phba->cfg_sg_seg_cnt = 50;
+	else if (phba->cfg_sg_seg_cnt <= 114)
+		phba->cfg_sg_seg_cnt = 114;
+	else if (phba->cfg_sg_seg_cnt <= 242)
+		phba->cfg_sg_seg_cnt = 242;
+	else
+		phba->cfg_sg_seg_cnt = 498;
+
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+					+ sizeof(struct fcp_rsp);
+	phba->cfg_sg_dma_buf_size +=
+		((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+	/* Initialize buffer queue management fields */
+	hbq_count = lpfc_sli_hbq_count();
+	for (i = 0; i < hbq_count; ++i)
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+	 */
+	/* Initialize the Abort scsi buffer list used by driver */
+	spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+	/* This abort list used by worker thread */
+	spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+	/*
+	 * Initialize dirver internal slow-path work queues
+	 */
+
+	/* Driver internel slow-path CQ Event pool */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+	/* Response IOCB work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Asynchronous event CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+	/* Fast-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+	/* Slow-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+	/* Receive queue CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+	/* Initialize the driver internal SLI layer lists. */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+	if (rc)
+		return -ENOMEM;
+
+	/* Create the bootstrap mailbox command */
+	rc = lpfc_create_bootstrap_mbox(phba);
+	if (unlikely(rc))
+		goto out_free_mem;
+
+	/* Set up the host's endian order with the device. */
+	rc = lpfc_setup_endian_order(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Set up the hba's configuration parameters. */
+	rc = lpfc_sli4_read_config(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Perform a function reset */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Create all the SLI4 queues */
+	rc = lpfc_sli4_queue_create(phba);
+	if (rc)
+		goto out_free_bsmbx;
+
+	/* Create driver internal CQE event pool */
+	rc = lpfc_sli4_cq_event_pool_create(phba);
+	if (rc)
+		goto out_destroy_queue;
+
+	/* Initialize and populate the iocb list per host */
+	rc = lpfc_init_sgl_list(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1400 Failed to initialize sgl list.\n");
+		goto out_destroy_cq_event_pool;
+	}
+	rc = lpfc_init_active_sgl_array(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1430 Failed to initialize sgl list.\n");
+		goto out_free_sgl_list;
+	}
+
+	rc = lpfc_sli4_init_rpi_hdrs(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1432 Failed to initialize rpi headers.\n");
+		goto out_free_active_sgl;
+	}
+
+	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+				    phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_eq_hdl) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2572 Failed allocate memory for fast-path "
+				"per-EQ handle array\n");
+		goto out_remove_rpi_hdrs;
+	}
+
+	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+				      phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+	if (!phba->sli4_hba.msix_entries) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2573 Failed allocate memory for msi-x "
+				"interrupt vector entries\n");
+		goto out_free_fcp_eq_hdl;
+	}
+
+	return rc;
+
+out_free_fcp_eq_hdl:
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+	lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+	lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+	lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+	lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+	lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+	lpfc_mem_free(phba);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+	/* Free the default FCR table */
+	lpfc_sli_remove_dflt_fcf(phba);
+
+	/* Free memory allocated for msi-x interrupt vector entries */
+	kfree(phba->sli4_hba.msix_entries);
+
+	/* Free memory allocated for fast-path work queue handles */
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+
+	/* Free the allocated rpi headers. */
+	lpfc_sli4_remove_rpi_hdrs(phba);
+
+	/* Free the ELS sgl list */
+	lpfc_free_active_sgl(phba);
+	lpfc_free_sgl_list(phba);
+
+	/* Free the SCSI sgl management array */
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+	/* Free the SLI4 queues */
+	lpfc_sli4_queue_destroy(phba);
+
+	/* Free the completion queue EQ event pool */
+	lpfc_sli4_cq_event_release_all(phba);
+	lpfc_sli4_cq_event_pool_destroy(phba);
+
+	/* Reset SLI4 HBA FCoE function */
+	lpfc_pci_function_reset(phba);
+
+	/* Free the bsmbx region. */
+	lpfc_destroy_bootstrap_mbox(phba);
+
+	/* Free the SLI Layer memory with SLI4 HBAs */
+	lpfc_mem_free_all(phba);
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	return;
+}
+
+/**
+ * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the device INIT interface API function jump table
+ * in @phba struct.
+ *
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
+		phba->lpfc_stop_port = lpfc_stop_port_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+		phba->lpfc_stop_port = lpfc_stop_port_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1431 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources before the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
+{
+	/*
+	 * Driver resources common to all SLI revisions
+	 */
+	atomic_set(&phba->fast_event_count, 0);
+	spin_lock_init(&phba->hbalock);
+
+	/* Initialize ndlp management spinlock */
+	spin_lock_init(&phba->ndlp_lock);
+
+	INIT_LIST_HEAD(&phba->port_list);
+	INIT_LIST_HEAD(&phba->work_list);
+	init_waitqueue_head(&phba->wait_4_mlo_m_q);
+
+	/* Initialize the wait queue head for the kernel thread */
+	init_waitqueue_head(&phba->work_waitq);
+
+	/* Initialize the scsi buffer list used by driver for scsi IO */
+	spin_lock_init(&phba->scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+
+	/* Initialize the fabric iocb list */
+	INIT_LIST_HEAD(&phba->fabric_iocb_list);
+
+	/* Initialize list to save ELS buffers */
+	INIT_LIST_HEAD(&phba->elsbuf);
+
+	/* Initialize FCF connection rec list */
+	INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
+
+	return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources after the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
+{
+	int error;
+
+	/* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					  "lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		return error;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up after
+ * the device specific resource setup for supporting the HBA device it
+ * attached to.
+ **/
+static void
+lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
+{
+	/* Stop kernel worker thread */
+	kthread_stop(phba->worker_thread);
+}
+
+/**
+ * lpfc_free_iocb_list - Free iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's IOCB list and memory.
+ **/
+static void
+lpfc_free_iocb_list(struct lpfc_hba *phba)
+{
+	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
+
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(iocbq_entry, iocbq_next,
+				 &phba->lpfc_iocb_list, list) {
+		list_del(&iocbq_entry->list);
+		kfree(iocbq_entry);
+		phba->total_iocbq_bufs--;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	return;
+}
+
+/**
+ * lpfc_init_iocb_list - Allocate and initialize iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's IOCB
+ * list and set up the IOCB tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
+{
+	struct lpfc_iocbq *iocbq_entry = NULL;
+	uint16_t iotag;
+	int i;
+
+	/* Initialize and populate the iocb list per host.  */
+	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
+	for (i = 0; i < iocb_count; i++) {
+		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
+		if (iocbq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d iocbs of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, LPFC_IOCB_LIST_CNT);
+			goto out_free_iocbq;
+		}
+
+		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
+		if (iotag == 0) {
+			kfree(iocbq_entry);
+			printk(KERN_ERR "%s: failed to allocate IOTAG. "
+				"Unloading driver.\n", __func__);
+			goto out_free_iocbq;
+		}
+		iocbq_entry->sli4_xritag = NO_XRI;
+
+		spin_lock_irq(&phba->hbalock);
+		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
+		phba->total_iocbq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	return 0;
+
+out_free_iocbq:
+	lpfc_free_iocb_list(phba);
+
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	LIST_HEAD(sglq_list);
+	int rc = 0;
+
+	spin_lock_irq(&phba->hbalock);
+	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+				 &sglq_list, list) {
+		list_del(&sglq_entry->list);
+		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+		kfree(sglq_entry);
+		phba->sli4_hba.total_sglq_bufs--;
+	}
+	rc = lpfc_sli4_remove_all_sgl_pages(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2005 Unable to deregister pages from HBA: %x", rc);
+	}
+	kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+	int size;
+	size = sizeof(struct lpfc_sglq *);
+	size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+	phba->sli4_hba.lpfc_sglq_active_list =
+		kzalloc(size, GFP_KERNEL);
+	if (!phba->sli4_hba.lpfc_sglq_active_list)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL;
+	int i;
+	int els_xri_cnt;
+
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2400 lpfc_init_sgl_list els %d.\n",
+				els_xri_cnt);
+	/* Initialize and populate the sglq list per host/VF. */
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+	/* Sanity check on XRI management */
+	if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2562 No room left for SCSI XRI allocation: "
+				"max_xri=%d, els_xri=%d\n",
+				phba->sli4_hba.max_cfg_param.max_xri,
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for the ELS XRI management array */
+	phba->sli4_hba.lpfc_els_sgl_array =
+			kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+			GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_els_sgl_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2401 Failed to allocate memory for ELS "
+				"XRI management array of size %d.\n",
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Keep the SCSI XRI into the XRI management array */
+	phba->sli4_hba.scsi_xri_max =
+			phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+	phba->sli4_hba.scsi_xri_cnt = 0;
+
+	phba->sli4_hba.lpfc_scsi_psb_array =
+			kzalloc((sizeof(struct lpfc_scsi_buf *) *
+			phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2563 Failed to allocate memory for SCSI "
+				"XRI management array of size %d.\n",
+				phba->sli4_hba.scsi_xri_max);
+		kfree(phba->sli4_hba.lpfc_els_sgl_array);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < els_xri_cnt; i++) {
+		sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+		if (sglq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d sgls of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, els_xri_cnt);
+			goto out_free_mem;
+		}
+
+		sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (sglq_entry->sli4_xritag == NO_XRI) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate XRI.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->buff_type = GEN_BUFF_TYPE;
+		sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+		if (sglq_entry->virt == NULL) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->sgl = sglq_entry->virt;
+		memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+		/* The list order is used by later block SGL registraton */
+		spin_lock_irq(&phba->hbalock);
+		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+		phba->sli4_hba.total_sglq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return 0;
+
+out_free_mem:
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+	lpfc_free_sgl_list(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	int longs;
+	uint16_t rpi_count;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * Provision an rpi bitmask range for discovery. The total count
+	 * is the difference between max and base + 1.
+	 */
+	rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+					   GFP_KERNEL);
+	if (!phba->sli4_hba.rpi_bmask)
+		return -ENOMEM;
+
+	rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+	if (!rpi_hdr) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0391 Error during rpi post operation\n");
+		lpfc_sli4_remove_rpis(phba);
+		rc = -ENODEV;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba.  This single region
+ * provides support for up to 64 rpis.  The region is used globally
+ * by the device.
+ *
+ * Returns:
+ *   A valid rpi hdr on success.
+ *   A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+	uint16_t rpi_limit, curr_rpi_range;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	spin_lock_irq(&phba->hbalock);
+	curr_rpi_range = phba->sli4_hba.next_rpi;
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * The port has a limited number of rpis. The increment here
+	 * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+	 * and to allow the full max_rpi range per port.
+	 */
+	if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+		return NULL;
+
+	/*
+	 * First allocate the protocol header region for the port.  The
+	 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+	 */
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return NULL;
+
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  LPFC_HDR_TEMPLATE_SIZE,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		rpi_hdr = NULL;
+		goto err_free_dmabuf;
+	}
+
+	memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+	if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+		rpi_hdr = NULL;
+		goto err_free_coherent;
+	}
+
+	/* Save the rpi header data for cleanup later. */
+	rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+	if (!rpi_hdr)
+		goto err_free_coherent;
+
+	rpi_hdr->dmabuf = dmabuf;
+	rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+	rpi_hdr->page_count = 1;
+	spin_lock_irq(&phba->hbalock);
+	rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+	list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * The next_rpi stores the next module-64 rpi value to post
+	 * in any subsequent rpi memory region postings.
+	 */
+	phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+	spin_unlock_irq(&phba->hbalock);
+	return rpi_hdr;
+
+ err_free_coherent:
+	dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+			  dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+	kfree(dmabuf);
+	return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+	list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+				 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		list_del(&rpi_hdr->list);
+		dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+				  rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+		kfree(rpi_hdr->dmabuf);
+		kfree(rpi_hdr);
+	}
+
+	phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+	memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
+ * lpfc_hba_alloc - Allocate driver hba data structure for a device.
+ * @pdev: pointer to pci device data structure.
+ *
+ * This routine is invoked to allocate the driver hba data structure for an
+ * HBA device. If the allocation is successful, the phba reference to the
+ * PCI device data structure is set.
+ *
+ * Return codes
+ *      pointer to @phba - sucessful
+ *      NULL - error
+ **/
+static struct lpfc_hba *
+lpfc_hba_alloc(struct pci_dev *pdev)
+{
+	struct lpfc_hba *phba;
+
+	/* Allocate memory for HBA structure */
+	phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
+	if (!phba) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1417 Failed to allocate hba struct.\n");
+		return NULL;
+	}
+
+	/* Set reference to PCI device in HBA structure */
+	phba->pcidev = pdev;
+
+	/* Assign an unused board number */
+	phba->brd_no = lpfc_get_instance();
+	if (phba->brd_no < 0) {
+		kfree(phba);
+		return NULL;
+	}
+
+	return phba;
+}
+
+/**
+ * lpfc_hba_free - Free driver hba data structure with a device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver hba data structure with an
+ * HBA device.
+ **/
+static void
+lpfc_hba_free(struct lpfc_hba *phba)
+{
+	/* Release the driver assigned board number */
+	idr_remove(&lpfc_hba_index, phba->brd_no);
+
+	kfree(phba);
+	return;
+}
+
+/**
+ * lpfc_create_shost - Create hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create HBA physical port and associate a SCSI
+ * host with it.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      other values - error
+ **/
+static int
+lpfc_create_shost(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport;
+	struct Scsi_Host  *shost;
+
+	/* Initialize HBA FC structure */
+	phba->fc_edtov = FF_DEF_EDTOV;
+	phba->fc_ratov = FF_DEF_RATOV;
+	phba->fc_altov = FF_DEF_ALTOV;
+	phba->fc_arbtov = FF_DEF_ARBTOV;
+
+	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
+	if (!vport)
+		return -ENODEV;
+
+	shost = lpfc_shost_from_vport(vport);
+	phba->pport = vport;
+	lpfc_debugfs_initialize(vport);
+	/* Put reference to SCSI host to driver's device private data */
+	pci_set_drvdata(phba->pcidev, shost);
+
+	return 0;
+}
+
+/**
+ * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to destroy HBA physical port and the associated
+ * SCSI host.
+ **/
+static void
+lpfc_destroy_shost(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+
+	/* Destroy physical port that associated with the SCSI host */
+	destroy_port(vport);
+
+	return;
+}
+
+/**
+ * lpfc_setup_bg - Setup Block guard structures and debug areas.
+ * @phba: pointer to lpfc hba data structure.
+ * @shost: the shost to be used to detect Block guard settings.
+ *
+ * This routine sets up the local Block guard protocol settings for @shost.
+ * This routine also allocates memory for debugging bg buffers.
+ **/
+static void
+lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
+{
+	int pagecnt = 10;
+	if (lpfc_prot_mask && lpfc_prot_guard) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"1478 Registering BlockGuard with the "
+				"SCSI layer\n");
+		scsi_host_set_prot(shost, lpfc_prot_mask);
+		scsi_host_set_guard(shost, lpfc_prot_guard);
+	}
+	if (!_dump_buf_data) {
+		while (pagecnt) {
+			spin_lock_init(&_dump_buf_lock);
+			_dump_buf_data =
+				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
+			if (_dump_buf_data) {
+				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				       "_dump_buf_data at 0x%p\n",
+				       (1 << pagecnt), _dump_buf_data);
+				_dump_buf_data_order = pagecnt;
+				memset(_dump_buf_data, 0,
+				       ((1 << PAGE_SHIFT) << pagecnt));
+				break;
+			} else
+				--pagecnt;
+		}
+		if (!_dump_buf_data_order)
+			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			       "memory for hexdump\n");
+	} else
+		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+		       "\n", _dump_buf_data);
+	if (!_dump_buf_dif) {
+		while (pagecnt) {
+			_dump_buf_dif =
+				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
+			if (_dump_buf_dif) {
+				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				       "_dump_buf_dif at 0x%p\n",
+				       (1 << pagecnt), _dump_buf_dif);
+				_dump_buf_dif_order = pagecnt;
+				memset(_dump_buf_dif, 0,
+				       ((1 << PAGE_SHIFT) << pagecnt));
+				break;
+			} else
+				--pagecnt;
+		}
+		if (!_dump_buf_dif_order)
+			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			       "memory for hexdump\n");
+	} else
+		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+		       _dump_buf_dif);
+}
+
+/**
+ * lpfc_post_init_setup - Perform necessary device post initialization setup.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to perform all the necessary post initialization
+ * setup for the device.
+ **/
+static void
+lpfc_post_init_setup(struct lpfc_hba *phba)
+{
+	struct Scsi_Host  *shost;
+	struct lpfc_adapter_event_header adapter_event;
+
+	/* Get the default values for Model Name and Description */
+	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
+	/*
+	 * hba setup may have changed the hba_queue_depth so we need to
+	 * adjust the value of can_queue.
+	 */
+	shost = pci_get_drvdata(phba->pcidev);
+	shost->can_queue = phba->cfg_hba_queue_depth - 10;
+	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+		lpfc_setup_bg(phba, shost);
+
+	lpfc_host_attrib_init(shost);
+
+	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+		spin_lock_irq(shost->host_lock);
+		lpfc_poll_start_timer(phba);
+		spin_unlock_irq(shost->host_lock);
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0428 Perform SCSI scan\n");
+	/* Send board arrival event to upper layer */
+	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
+	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(adapter_event),
+				  (char *) &adapter_event,
+				  LPFC_NL_VENDOR_ID);
+	return;
+}
+
+/**
+ * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-3 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar2map_len;
+	int i, hbq_count;
+	void *ptr;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of Bar0 and Bar2 and the number of bytes
+	 * required by each mapping.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, 0);
+	bar0map_len = pci_resource_len(pdev, 0);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, 2);
+	bar2map_len = pci_resource_len(pdev, 2);
+
+	/* Map HBA SLIM to a kernel virtual address. */
+	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->slim_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLIM memory.\n");
+		goto out;
+	}
+
+	/* Map HBA Control Registers to a kernel virtual address. */
+	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for HBA control registers.\n");
+		goto out_iounmap_slim;
+	}
+
+	/* Allocate memory for SLI-2 structures */
+	phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
+					       SLI2_SLIM_SIZE,
+					       &phba->slim2p.phys,
+					       GFP_KERNEL);
+	if (!phba->slim2p.virt)
+		goto out_iounmap;
+
+	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
+	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
+	phba->IOCBs = (phba->slim2p.virt +
+		       offsetof(struct lpfc_sli2_slim, IOCBs));
+
+	phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
+						 lpfc_sli_hbq_size(),
+						 &phba->hbqslimp.phys,
+						 GFP_KERNEL);
+	if (!phba->hbqslimp.virt)
+		goto out_free_slim;
+
+	hbq_count = lpfc_sli_hbq_count();
+	ptr = phba->hbqslimp.virt;
+	for (i = 0; i < hbq_count; ++i) {
+		phba->hbqs[i].hbq_virt = ptr;
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+		ptr += (lpfc_hbq_defs[i]->entry_count *
+			sizeof(struct lpfc_hbq_entry));
+	}
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
+
+	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
+
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+
+	phba->MBslimaddr = phba->slim_memmap_p;
+	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+	return 0;
+
+out_free_slim:
+	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+			  phba->slim2p.virt, phba->slim2p.phys);
+out_iounmap:
+	iounmap(phba->ctrl_regs_memmap_p);
+out_iounmap_slim:
+	iounmap(phba->slim_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+			  phba->hbqslimp.virt, phba->hbqslimp.phys);
+	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+			  phba->slim2p.virt, phba->slim2p.phys);
+
+	/* I/O memory unmap */
+	iounmap(phba->ctrl_regs_memmap_p);
+	iounmap(phba->slim_memmap_p);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+	struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+	uint32_t onlnreg0, onlnreg1;
+	int i, port_error = -ENODEV;
+
+	if (!phba->sli4_hba.STAregaddr)
+		return -ENODEV;
+
+	/* With uncoverable error, log the error message and return error */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+		uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1422 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerrlo_reg.word0, uerrhi_reg.word0,
+					onlnreg0, onlnreg1);
+		}
+		return -ENODEV;
+	}
+
+	/* Wait up to 30 seconds for the SLI Port POST done and ready */
+	for (i = 0; i < 3000; i++) {
+		sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+		/* Encounter fatal POST error, break out */
+		if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+			port_error = -ENODEV;
+			break;
+		}
+		if (LPFC_POST_STAGE_ARMFW_READY ==
+		    bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+			port_error = 0;
+			break;
+		}
+		msleep(10);
+	}
+
+	if (port_error)
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"1408 Failure HBA POST Status: sta_reg=0x%x, "
+			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+			"dl=x%x, pstatus=x%x\n", sta_reg.word0,
+			bf_get(lpfc_hst_state_perr, &sta_reg),
+			bf_get(lpfc_hst_state_sfi, &sta_reg),
+			bf_get(lpfc_hst_state_nip, &sta_reg),
+			bf_get(lpfc_hst_state_ipc, &sta_reg),
+			bf_get(lpfc_hst_state_xrom, &sta_reg),
+			bf_get(lpfc_hst_state_dl, &sta_reg),
+			bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+	/* Log device information */
+	scratchpad.word0 =  readl(phba->sli4_hba.SCRATCHPADregaddr);
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+			"FeatureL1=0x%x, FeatureL2=0x%x\n",
+			bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+			bf_get(lpfc_scratchpad_slirev, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+	return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+	phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_LO;
+	phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_HI;
+	phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE0;
+	phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE1;
+	phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+	phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_STATE;
+	phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_ISR0;
+	phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_IMR0;
+	phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				     LPFC_HST_ISCR0;
+	return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+	if (vf > LPFC_VIR_FUNC_MAX)
+		return -ENODEV;
+
+	phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+	phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+	phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+	phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+	phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+	return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec.  This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs.  No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	uint32_t bmbx_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address *dma_address;
+	uint32_t pa_addr;
+	uint64_t phys_addr;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * The bootstrap mailbox region is comprised of 2 parts
+	 * plus an alignment restriction of 16 bytes.
+	 */
+	bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  bmbx_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, bmbx_size);
+
+	/*
+	 * Initialize the bootstrap mailbox pointers now so that the register
+	 * operations are simple later.  The mailbox dma address is required
+	 * to be 16-byte aligned.  Also align the virtual memory as each
+	 * maibox is copied into the bmbx mailbox region before issuing the
+	 * command to the port.
+	 */
+	phba->sli4_hba.bmbx.dmabuf = dmabuf;
+	phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+	phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+					      LPFC_ALIGN_16_BYTE);
+	phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+					      LPFC_ALIGN_16_BYTE);
+
+	/*
+	 * Set the high and low physical addresses now.  The SLI4 alignment
+	 * requirement is 16 bytes and the mailbox is posted to the port
+	 * as two 30-bit addresses.  The other data is a bit marking whether
+	 * the 30-bit address is the high or low address.
+	 * Upcast bmbx aphys to 64bits so shift instruction compiles
+	 * clean on 32 bit machines.
+	 */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+	pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+	dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_HI);
+
+	pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+	dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_LO);
+	return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	dma_free_coherent(&phba->pcidev->dev,
+			  phba->sli4_hba.bmbx.bmbx_size,
+			  phba->sli4_hba.bmbx.dmabuf->virt,
+			  phba->sli4_hba.bmbx.dmabuf->phys);
+
+	kfree(phba->sli4_hba.bmbx.dmabuf);
+	memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb;
+	struct lpfc_mbx_read_config *rd_config;
+	uint32_t rc = 0;
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2011 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	lpfc_read_config(phba, pmb);
+
+	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2012 Mailbox failed , mbxCmd x%x "
+			"READ_CONFIG, mbxStatus x%x\n",
+			bf_get(lpfc_mqe_command, &pmb->u.mqe),
+			bf_get(lpfc_mqe_status, &pmb->u.mqe));
+		rc = -EIO;
+	} else {
+		rd_config = &pmb->u.mqe.un.rd_config;
+		phba->sli4_hba.max_cfg_param.max_xri =
+			bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		phba->sli4_hba.max_cfg_param.xri_base =
+			bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vpi =
+			bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vpi_base =
+			bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rpi =
+			bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.rpi_base =
+			bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vfi =
+			bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vfi_base =
+			bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_fcfi =
+			bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.fcfi_base =
+			bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_eq =
+			bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rq =
+			bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_wq =
+			bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_cq =
+			bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+		phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+		phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+		phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+		phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+		phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+		phba->max_vports = phba->max_vpi;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2003 cfg params XRI(B:%d M:%d), "
+				"VPI(B:%d M:%d) "
+				"VFI(B:%d M:%d) "
+				"RPI(B:%d M:%d) "
+				"FCFI(B:%d M:%d)\n",
+				phba->sli4_hba.max_cfg_param.xri_base,
+				phba->sli4_hba.max_cfg_param.max_xri,
+				phba->sli4_hba.max_cfg_param.vpi_base,
+				phba->sli4_hba.max_cfg_param.max_vpi,
+				phba->sli4_hba.max_cfg_param.vfi_base,
+				phba->sli4_hba.max_cfg_param.max_vfi,
+				phba->sli4_hba.max_cfg_param.rpi_base,
+				phba->sli4_hba.max_cfg_param.max_rpi,
+				phba->sli4_hba.max_cfg_param.fcfi_base,
+				phba->sli4_hba.max_cfg_param.max_fcfi);
+	}
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
+	if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+		phba->cfg_hba_queue_depth =
+				phba->sli4_hba.max_cfg_param.max_xri;
+	return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+				      HOST_ENDIAN_HIGH_WORD1};
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0492 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+	 * words to contain special data values and no other data.
+	 */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0493 SLI_CONFIG_SPECIAL mailbox failed with "
+				"status x%x\n",
+				rc);
+		rc = -EIO;
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+	struct lpfc_queue *qdesc;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int cfg_fcp_wq_count;
+	int cfg_fcp_eq_count;
+
+	/*
+	 * Sanity check for confiugred queue parameters against the run-time
+	 * device parameters
+	 */
+
+	/* Sanity check on FCP fast-path WQ parameters */
+	cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+	if (cfg_fcp_wq_count >
+	    (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+		cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+				   LPFC_SP_WQN_DEF;
+		if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2581 Not enough WQs (%d) from "
+					"the pci function for supporting "
+					"FCP WQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_wq,
+					phba->cfg_fcp_wq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2582 Not enough WQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP WQs (%d), the actual FCP WQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_wq,
+				phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+	}
+	/* The actual number of FCP work queues adopted */
+	phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+	/* Sanity check on FCP fast-path EQ parameters */
+	cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+	if (cfg_fcp_eq_count >
+	    (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+		cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+				   LPFC_SP_EQN_DEF;
+		if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2574 Not enough EQs (%d) from the "
+					"pci function for supporting FCP "
+					"EQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_eq,
+					phba->cfg_fcp_eq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2575 Not enough EQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP EQs (%d), the actual FCP EQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_eq,
+				phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+	}
+	/* It does not make sense to have more EQs than WQs */
+	if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2593 The number of FCP EQs (%d) is more "
+				"than the number of FCP WQs (%d), take "
+				"the number of FCP EQs same as than of "
+				"WQs (%d)\n", cfg_fcp_eq_count,
+				phba->cfg_fcp_wq_count,
+				phba->cfg_fcp_wq_count);
+		cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+	}
+	/* The actual number of FCP event queues adopted */
+	phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+	/* The overall number of event queues used */
+	phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+	/*
+	 * Create Event Queues (EQs)
+	 */
+
+	/* Get EQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+	phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+	/* Create slow path event queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+				      phba->sli4_hba.eq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0496 Failed allocate slow-path EQ\n");
+		goto out_error;
+	}
+	phba->sli4_hba.sp_eq = qdesc;
+
+	/* Create fast-path FCP Event Queue(s) */
+	phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+			       phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2576 Failed allocate memory for fast-path "
+				"EQ record array\n");
+		goto out_free_sp_eq;
+	}
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+					      phba->sli4_hba.eq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0497 Failed allocate fast-path EQ\n");
+			goto out_free_fp_eq;
+		}
+		phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+	}
+
+	/*
+	 * Create Complete Queues (CQs)
+	 */
+
+	/* Get CQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+	/* Create slow-path Mailbox Command Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0500 Failed allocate slow-path mailbox CQ\n");
+		goto out_free_fp_eq;
+	}
+	phba->sli4_hba.mbx_cq = qdesc;
+
+	/* Create slow-path ELS Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0501 Failed allocate slow-path ELS CQ\n");
+		goto out_free_mbx_cq;
+	}
+	phba->sli4_hba.els_cq = qdesc;
+
+	/* Create slow-path Unsolicited Receive Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0502 Failed allocate slow-path USOL RX CQ\n");
+		goto out_free_els_cq;
+	}
+	phba->sli4_hba.rxq_cq = qdesc;
+
+	/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+	phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2577 Failed allocate memory for fast-path "
+				"CQ record array\n");
+		goto out_free_rxq_cq;
+	}
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+					      phba->sli4_hba.cq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0499 Failed allocate fast-path FCP "
+					"CQ (%d)\n", fcp_cqidx);
+			goto out_free_fcp_cq;
+		}
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+	}
+
+	/* Create Mailbox Command Queue */
+	phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+	phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+				      phba->sli4_hba.mq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0505 Failed allocate slow-path MQ\n");
+		goto out_free_fcp_cq;
+	}
+	phba->sli4_hba.mbx_wq = qdesc;
+
+	/*
+	 * Create all the Work Queues (WQs)
+	 */
+	phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+	phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+	/* Create slow-path ELS Work Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+				      phba->sli4_hba.wq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0504 Failed allocate slow-path ELS WQ\n");
+		goto out_free_mbx_wq;
+	}
+	phba->sli4_hba.els_wq = qdesc;
+
+	/* Create fast-path FCP Work Queue(s) */
+	phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_wq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2578 Failed allocate memory for fast-path "
+				"WQ record array\n");
+		goto out_free_els_wq;
+	}
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+					      phba->sli4_hba.wq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0503 Failed allocate fast-path FCP "
+					"WQ (%d)\n", fcp_wqidx);
+			goto out_free_fcp_wq;
+		}
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+	phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+	/* Create Receive Queue for header */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0506 Failed allocate receive HRQ\n");
+		goto out_free_fcp_wq;
+	}
+	phba->sli4_hba.hdr_rq = qdesc;
+
+	/* Create Receive Queue for data */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0507 Failed allocate receive DRQ\n");
+		goto out_free_hdr_rq;
+	}
+	phba->sli4_hba.dat_rq = qdesc;
+
+	return 0;
+
+out_free_hdr_rq:
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+		phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+out_error:
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Release mailbox command work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+
+	/* Release ELS work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+
+	/* Release FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_wq);
+	phba->sli4_hba.fcp_wq = NULL;
+
+	/* Release unsolicited receive queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+	lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+	phba->sli4_hba.dat_rq = NULL;
+
+	/* Release unsolicited receive complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+
+	/* Release ELS complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+
+	/* Release mailbox command complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+
+	/* Release FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_cq);
+	phba->sli4_hba.fcp_cq = NULL;
+
+	/* Release fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+	kfree(phba->sli4_hba.fp_eq);
+	phba->sli4_hba.fp_eq = NULL;
+
+	/* Release slow-path event queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+	int rc = -ENOMEM;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int fcp_cq_index = 0;
+
+	/*
+	 * Set up Event Queues (EQs)
+	 */
+
+	/* Set up slow-path event queue */
+	if (!phba->sli4_hba.sp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0520 Slow-path EQ not allocated\n");
+		goto out_error;
+	}
+	rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+			    LPFC_SP_DEF_IMAX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0521 Failed setup of slow-path EQ: "
+				"rc = 0x%x\n", rc);
+		goto out_error;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2583 Slow-path EQ setup: queue-id=%d\n",
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path event queue */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0522 Fast-path EQ (%d) not "
+					"allocated\n", fcp_eqidx);
+			goto out_destroy_fp_eq;
+		}
+		rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+				    phba->cfg_fcp_imax);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0523 Failed setup of fast-path EQ "
+					"(%d), rc = 0x%x\n", fcp_eqidx, rc);
+			goto out_destroy_fp_eq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2584 Fast-path EQ setup: "
+				"queue[%d]-id=%d\n", fcp_eqidx,
+				phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+	}
+
+	/*
+	 * Set up Complete Queues (CQs)
+	 */
+
+	/* Set up slow-path MBOX Complete Queue as the first CQ */
+	if (!phba->sli4_hba.mbx_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0528 Mailbox CQ not allocated\n");
+		goto out_destroy_fp_eq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+			    LPFC_MCQ, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0529 Failed setup of slow-path mailbox CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fp_eq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.mbx_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path ELS Complete Queue */
+	if (!phba->sli4_hba.els_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0530 ELS CQ not allocated\n");
+		goto out_destroy_mbx_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+			    LPFC_WCQ, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0531 Failed setup of slow-path ELS CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.els_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path Unsolicited Receive Complete Queue */
+	if (!phba->sli4_hba.rxq_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0532 USOL RX CQ not allocated\n");
+		goto out_destroy_els_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+			    LPFC_RCQ, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0533 Failed setup of slow-path USOL RX CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_els_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.rxq_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path FCP Response Complete Queue */
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0526 Fast-path FCP CQ (%d) not "
+					"allocated\n", fcp_cqidx);
+			goto out_destroy_fcp_cq;
+		}
+		rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+				    phba->sli4_hba.fp_eq[fcp_cqidx],
+				    LPFC_WCQ, LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0527 Failed setup of fast-path FCP "
+					"CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+			goto out_destroy_fcp_cq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2588 FCP CQ setup: cq[%d]-id=%d, "
+				"parent eq[%d]-id=%d\n",
+				fcp_cqidx,
+				phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+				fcp_cqidx,
+				phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+	}
+
+	/*
+	 * Set up all the Work Queues (WQs)
+	 */
+
+	/* Set up Mailbox Command Queue */
+	if (!phba->sli4_hba.mbx_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0538 Slow-path MQ not allocated\n");
+		goto out_destroy_fcp_cq;
+	}
+	rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+			    phba->sli4_hba.mbx_cq, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0539 Failed setup of slow-path MQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.mbx_wq->queue_id,
+			phba->sli4_hba.mbx_cq->queue_id);
+
+	/* Set up slow-path ELS Work Queue */
+	if (!phba->sli4_hba.els_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0536 Slow-path ELS WQ not allocated\n");
+		goto out_destroy_mbx_wq;
+	}
+	rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+			    phba->sli4_hba.els_cq, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0537 Failed setup of slow-path ELS WQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.els_wq->queue_id,
+			phba->sli4_hba.els_cq->queue_id);
+
+	/* Set up fast-path FCP Work Queue */
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0534 Fast-path FCP WQ (%d) not "
+					"allocated\n", fcp_wqidx);
+			goto out_destroy_fcp_wq;
+		}
+		rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+				    phba->sli4_hba.fcp_cq[fcp_cq_index],
+				    LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0535 Failed setup of fast-path FCP "
+					"WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+			goto out_destroy_fcp_wq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2591 FCP WQ setup: wq[%d]-id=%d, "
+				"parent cq[%d]-id=%d\n",
+				fcp_wqidx,
+				phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+				fcp_cq_index,
+				phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+		/* Round robin FCP Work Queue's Completion Queue assignment */
+		fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0540 Receive Queue not allocated\n");
+		goto out_destroy_fcp_wq;
+	}
+	rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			    phba->sli4_hba.rxq_cq, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0541 Failed setup of Receive Queue: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+			"parent cq-id=%d\n",
+			phba->sli4_hba.hdr_rq->queue_id,
+			phba->sli4_hba.dat_rq->queue_id,
+			phba->sli4_hba.rxq_cq->queue_id);
+	return 0;
+
+out_destroy_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Unset mailbox command work queue */
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+	/* Unset ELS work queue */
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+	/* Unset unsolicited receive queue */
+	lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+	/* Unset FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+	/* Unset mailbox command complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+	/* Unset ELS complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+	/* Unset unsolicited receive complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+	/* Unset FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+	/* Unset fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+	/* Unset slow-path event queue */
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ *   - Mailbox asynchronous events
+ *   - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	int i;
+
+	for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+		cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+		if (!cq_event)
+			goto out_pool_create_fail;
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_cqe_event_pool);
+	}
+	return 0;
+
+out_pool_create_fail:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event, *next_cq_event;
+
+	list_for_each_entry_safe(cq_event, next_cq_event,
+				 &phba->sli4_hba.sp_cqe_event_pool, list) {
+		list_del(&cq_event->list);
+		kfree(cq_event);
+	}
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event = NULL;
+
+	list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+			 struct lpfc_cq_event, list);
+	return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cq_event = __lpfc_sli4_cq_event_alloc(phba);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			     struct lpfc_cq_event *cq_event)
+{
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			   struct lpfc_cq_event *cq_event)
+{
+	unsigned long iflags;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_sli4_cq_event_release(phba, cq_event);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cqelist);
+	struct lpfc_cq_event *cqe;
+	unsigned long iflags;
+
+	/* Retrieve all the pending WCQEs from pending WCQE lists */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Pending FCP XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending ELS XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending asynnc events */
+	list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+			 &cqelist);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	while (!list_empty(&cqelist)) {
+		list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+		lpfc_sli4_cq_event_release(phba, cqe);
+	}
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0494 Unable to allocate memory for issuing "
+				"SLI_FUNCTION_RESET mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+			 LPFC_SLI4_MBX_EMBED);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0495 SLI_FUNCTION_RESET mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int length, cmdsent;
+	uint32_t mbox_tmo;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (cnt == 0) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2518 Requested to send 0 NOP mailbox cmd\n");
+		return cnt;
+	}
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2519 Unable to allocate memory for issuing "
+				"NOP mailbox command\n");
+		return 0;
+	}
+
+	/* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+	length = (sizeof(struct lpfc_mbx_nop) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+		if (!phba->sli4_hba.intr_enable)
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		else
+			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+		if (rc == MBX_TIMEOUT)
+			break;
+		/* Check return status */
+		shdr = (union lpfc_sli4_cfg_shdr *)
+			&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+					 &shdr->response);
+		if (shdr_status || shdr_add_status || rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"2520 NOP mailbox command failed "
+					"status x%x add_status x%x mbx "
+					"status x%x\n", shdr_status,
+					shdr_add_status, rc);
+			break;
+		}
+	}
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+
+	return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+	LPFC_MBOXQ_t *mbox;
+	uint32_t mbox_tmo;
+	int rc;
+	unsigned long flags;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+	if (!mbox)
+		return;
+
+	lpfc_unreg_fcfi(mbox, fcfi);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2517 Unregister FCFI command failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mbox->u.mqe));
+	else {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		/* Mark the FCFI is no longer registered */
+		phba->fcf.fcf_flag &=
+			~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+	}
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar1map_len, bar2map_len;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+	 * number of bytes required by each mapping. They are actually
+	 * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+	bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+	phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+	bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+	bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+	/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+	phba->sli4_hba.conf_regs_memmap_p =
+				ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->sli4_hba.conf_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 PCI config registers.\n");
+		goto out;
+	}
+
+	/* Map SLI4 HBA Control Register base to a kernel virtual address. */
+	phba->sli4_hba.ctrl_regs_memmap_p =
+				ioremap(phba->pci_bar1_map, bar1map_len);
+	if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA control registers.\n");
+		goto out_iounmap_conf;
+	}
+
+	/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+	phba->sli4_hba.drbl_regs_memmap_p =
+				ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->sli4_hba.drbl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA doorbell registers.\n");
+		goto out_iounmap_ctrl;
+	}
+
+	/* Set up BAR0 PCI config space register memory map */
+	lpfc_sli4_bar0_register_memmap(phba);
+
+	/* Set up BAR1 register memory map */
+	lpfc_sli4_bar1_register_memmap(phba);
+
+	/* Set up BAR2 register memory map */
+	error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+	if (error)
+		goto out_iounmap_all;
+
+	return 0;
+
+out_iounmap_all:
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+
+	/* Unmap I/O memory space */
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+	return;
+}
+
+/**
+ * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-3 interface specs. The kernel function pci_enable_msix() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * invoked, enables either all or nothing, depending on the current
+ * availability of PCI vector resources. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
  * later when device is unloading, the driver should always call free_irq()
  * on all MSI-X vectors it has done request_irq() on before calling
  * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
@@ -2333,7 +6029,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
  *   other values - error
  **/
 static int
-lpfc_enable_msix(struct lpfc_hba *phba)
+lpfc_sli_enable_msix(struct lpfc_hba *phba)
 {
 	int rc, i;
 	LPFC_MBOXQ_t *pmb;
@@ -2349,20 +6045,21 @@ lpfc_enable_msix(struct lpfc_hba *phba)
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"0420 PCI enable MSI-X failed (%d)\n", rc);
 		goto msi_fail_out;
-	} else
-		for (i = 0; i < LPFC_MSIX_VECTORS; i++)
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0477 MSI-X entry[%d]: vector=x%x "
-					"message=%d\n", i,
-					phba->msix_entries[i].vector,
-					phba->msix_entries[i].entry);
+	}
+	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0477 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", i,
+				phba->msix_entries[i].vector,
+				phba->msix_entries[i].entry);
 	/*
 	 * Assign MSI-X vectors to interrupt handlers
 	 */
 
 	/* vector-0 is associated to slow-path handler */
-	rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
-			 IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	rc = request_irq(phba->msix_entries[0].vector,
+			 &lpfc_sli_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
 	if (rc) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"0421 MSI-X slow-path request_irq failed "
@@ -2371,8 +6068,9 @@ lpfc_enable_msix(struct lpfc_hba *phba)
 	}
 
 	/* vector-1 is associated to fast-path handler */
-	rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
-			 IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+	rc = request_irq(phba->msix_entries[1].vector,
+			 &lpfc_sli_fp_intr_handler, IRQF_SHARED,
+			 LPFC_FP_DRIVER_HANDLER_NAME, phba);
 
 	if (rc) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2401,7 +6099,7 @@ lpfc_enable_msix(struct lpfc_hba *phba)
 		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 				"0351 Config MSI mailbox command failed, "
 				"mbxCmd x%x, mbxStatus x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
 		goto mbx_fail_out;
 	}
 
@@ -2428,14 +6126,14 @@ msi_fail_out:
 }
 
 /**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
+ * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * MSI-X interrupt mode to device with SLI-3 interface spec.
  **/
 static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_sli_disable_msix(struct lpfc_hba *phba)
 {
 	int i;
 
@@ -2444,23 +6142,26 @@ lpfc_disable_msix(struct lpfc_hba *phba)
 		free_irq(phba->msix_entries[i].vector, phba);
 	/* Disable MSI-X */
 	pci_disable_msix(phba->pcidev);
+
+	return;
 }
 
 /**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
+ * enable the MSI vector. The device driver is responsible for calling the
+ * request_irq() to register MSI vector with a interrupt the handler, which
+ * is done in this function.
  *
  * Return codes
  * 	0 - sucessful
  * 	other values - error
  */
 static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+lpfc_sli_enable_msi(struct lpfc_hba *phba)
 {
 	int rc;
 
@@ -2474,7 +6175,7 @@ lpfc_enable_msi(struct lpfc_hba *phba)
 		return rc;
 	}
 
-	rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+	rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
 			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
 	if (rc) {
 		pci_disable_msi(phba->pcidev);
@@ -2485,17 +6186,17 @@ lpfc_enable_msi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_disable_msi - Disable MSI interrupt mode
+ * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
  */
-
 static void
-lpfc_disable_msi(struct lpfc_hba *phba)
+lpfc_sli_disable_msi(struct lpfc_hba *phba)
 {
 	free_irq(phba->pcidev->irq, phba);
 	pci_disable_msi(phba->pcidev);
@@ -2503,80 +6204,298 @@ lpfc_disable_msi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_log_intr_mode - Log the active interrupt mode
+ * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
- * @intr_mode: active interrupt mode adopted.
  *
- * This routine it invoked to log the currently used active interrupt mode
- * to the device.
- */
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
+ * spec. Depends on the interrupt mode configured to the driver, the driver
+ * will try to fallback from the configured interrupt mode to an interrupt
+ * mode which is supported by the platform, kernel, and device in the order
+ * of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ *   0 - sucessful
+ *   other values - error
+ **/
+static uint32_t
+lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+	uint32_t intr_mode = LPFC_INTR_ERROR;
+	int retval;
+
+	if (cfg_mode == 2) {
+		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+		retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
+		if (!retval) {
+			/* Now, try to enable MSI-X interrupt mode */
+			retval = lpfc_sli_enable_msix(phba);
+			if (!retval) {
+				/* Indicate initialization to MSI-X mode */
+				phba->intr_type = MSIX;
+				intr_mode = 2;
+			}
+		}
+	}
+
+	/* Fallback to MSI if MSI-X initialization failed */
+	if (cfg_mode >= 1 && phba->intr_type == NONE) {
+		retval = lpfc_sli_enable_msi(phba);
+		if (!retval) {
+			/* Indicate initialization to MSI mode */
+			phba->intr_type = MSI;
+			intr_mode = 1;
+		}
+	}
+
+	/* Fallback to INTx if both MSI-X/MSI initalization failed */
+	if (phba->intr_type == NONE) {
+		retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
+				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+		if (!retval) {
+			/* Indicate initialization to INTx mode */
+			phba->intr_type = INTx;
+			intr_mode = 0;
+		}
+	}
+	return intr_mode;
+}
+
+/**
+ * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate the
+ * driver's interrupt handler(s) from interrupt vector(s) to device with
+ * SLI-3 interface spec. Depending on the interrupt mode, the driver will
+ * release the interrupt vector(s) for the message signaled interrupt.
+ **/
 static void
-lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+lpfc_sli_disable_intr(struct lpfc_hba *phba)
 {
-	switch (intr_mode) {
-	case 0:
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0470 Enable INTx interrupt mode.\n");
-		break;
-	case 1:
+	/* Disable the currently initialized interrupt mode */
+	if (phba->intr_type == MSIX)
+		lpfc_sli_disable_msix(phba);
+	else if (phba->intr_type == MSI)
+		lpfc_sli_disable_msi(phba);
+	else if (phba->intr_type == INTx)
+		free_irq(phba->pcidev->irq, phba);
+
+	/* Reset interrupt management states */
+	phba->intr_type = NONE;
+	phba->sli.slistat.sli_intr = 0;
+
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	/* Set up MSI-X multi-message vectors */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+		phba->sli4_hba.msix_entries[index].entry = index;
+
+	/* Configure MSI-X capability structure */
+	rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+			     phba->sli4_hba.cfg_eqn);
+	if (rc) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0481 Enabled MSI interrupt mode.\n");
-		break;
-	case 2:
+				"0484 PCI enable MSI-X failed (%d)\n", rc);
+		goto msi_fail_out;
+	}
+	/* Log MSI-X vector assignment */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0480 Enabled MSI-X interrupt mode.\n");
-		break;
-	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0482 Illegal interrupt mode.\n");
-		break;
+				"0489 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", index,
+				phba->sli4_hba.msix_entries[index].vector,
+				phba->sli4_hba.msix_entries[index].entry);
+	/*
+	 * Assign MSI-X vectors to interrupt handlers
+	 */
+
+	/* The first vector must associated to slow-path handler for MQ */
+	rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+			 &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0485 MSI-X slow-path request_irq failed "
+				"(%d)\n", rc);
+		goto msi_fail_out;
 	}
-	return;
+
+	/* The rest of the vector(s) are associated to fast-path handler(s) */
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+		phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+		rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+				 &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+				 LPFC_FP_DRIVER_HANDLER_NAME,
+				 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"0486 MSI-X fast-path (%d) "
+					"request_irq failed (%d)\n", index, rc);
+			goto cfg_fail_out;
+		}
+	}
+
+	return rc;
+
+cfg_fail_out:
+	/* free the irq already requested */
+	for (--index; index >= 1; index--)
+		free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+	/* free the irq already requested */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+	/* Unconfigure MSI-X capability structure */
+	pci_disable_msix(phba->pcidev);
+	return rc;
 }
 
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
 static void
-lpfc_stop_port(struct lpfc_hba *phba)
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
 {
-	/* Clear all interrupt enable conditions */
-	writel(0, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
-	/* Clear all pending interrupts */
-	writel(0xffffffff, phba->HAregaddr);
-	readl(phba->HAregaddr); /* flush */
+	int index;
 
-	/* Reset some HBA SLI setup states */
-	lpfc_stop_phba_timers(phba);
-	phba->pport->work_port_events = 0;
+	/* Free up MSI-X multi-message vectors */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+		free_irq(phba->sli4_hba.msix_entries[index].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+	/* Disable MSI-X */
+	pci_disable_msix(phba->pcidev);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	rc = pci_enable_msi(phba->pcidev);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0487 PCI enable MSI mode success.\n");
+	else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0488 PCI enable MSI mode failed (%d)\n", rc);
+		return rc;
+	}
+
+	rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+	if (rc) {
+		pci_disable_msi(phba->pcidev);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0490 MSI request_irq failed (%d)\n", rc);
+	}
+
+	for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+		phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+	}
+
+	return rc;
+}
 
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+	free_irq(phba->pcidev->irq, phba);
+	pci_disable_msi(phba->pcidev);
 	return;
 }
 
 /**
- * lpfc_enable_intr - Enable device interrupt
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to enable device interrupt and associate driver's
- * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
- * mode configured to the driver, the driver will try to fallback from the
- * configured interrupt mode to an interrupt mode which is supported by the
- * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
  *
  * Return codes
- *   0 - sucessful
- *   other values - error
+ * 	0 - sucessful
+ * 	other values - error
  **/
 static uint32_t
-lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 {
 	uint32_t intr_mode = LPFC_INTR_ERROR;
-	int retval;
+	int retval, index;
 
 	if (cfg_mode == 2) {
-		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
-		retval = lpfc_sli_config_port(phba, 3);
+		/* Preparation before conf_msi mbox cmd */
+		retval = 0;
 		if (!retval) {
 			/* Now, try to enable MSI-X interrupt mode */
-			retval = lpfc_enable_msix(phba);
+			retval = lpfc_sli4_enable_msix(phba);
 			if (!retval) {
 				/* Indicate initialization to MSI-X mode */
 				phba->intr_type = MSIX;
@@ -2587,7 +6506,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 
 	/* Fallback to MSI if MSI-X initialization failed */
 	if (cfg_mode >= 1 && phba->intr_type == NONE) {
-		retval = lpfc_enable_msi(phba);
+		retval = lpfc_sli4_enable_msi(phba);
 		if (!retval) {
 			/* Indicate initialization to MSI mode */
 			phba->intr_type = MSI;
@@ -2597,34 +6516,39 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 
 	/* Fallback to INTx if both MSI-X/MSI initalization failed */
 	if (phba->intr_type == NONE) {
-		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
 				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
 		if (!retval) {
 			/* Indicate initialization to INTx mode */
 			phba->intr_type = INTx;
 			intr_mode = 0;
+			for (index = 0; index < phba->cfg_fcp_eq_count;
+			     index++) {
+				phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+				phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+			}
 		}
 	}
 	return intr_mode;
 }
 
 /**
- * lpfc_disable_intr - Disable device interrupt
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to disable device interrupt and disassociate the
- * driver's interrupt handler(s) from interrupt vector(s). Depending on the
- * interrupt mode, the driver will release the interrupt vector(s) for the
- * message signaled interrupt.
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
  **/
 static void
-lpfc_disable_intr(struct lpfc_hba *phba)
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
 {
 	/* Disable the currently initialized interrupt mode */
 	if (phba->intr_type == MSIX)
-		lpfc_disable_msix(phba);
+		lpfc_sli4_disable_msix(phba);
 	else if (phba->intr_type == MSI)
-		lpfc_disable_msi(phba);
+		lpfc_sli4_disable_msi(phba);
 	else if (phba->intr_type == INTx)
 		free_irq(phba->pcidev->irq, phba);
 
@@ -2636,263 +6560,233 @@ lpfc_disable_intr(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
- * @pdev: pointer to PCI device
- * @pid: pointer to PCI device identifier
- *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
- * PCI device-specific information of the device and driver to see if the
- * driver state that it can support this kind of device. If the match is
- * successful, the driver core invokes this routine. If this routine
- * determines it can claim the HBA, it does all the initialization that it
- * needs to do to handle the HBA properly.
+ * lpfc_unset_hba - Unset SLI3 hba device initialization
+ * @phba: pointer to lpfc hba data structure.
  *
- * Return code
- *   0 - driver can claim the device
- *   negative value - driver can not claim the device
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-3 interface spec.
  **/
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+static void
+lpfc_unset_hba(struct lpfc_hba *phba)
 {
-	struct lpfc_vport *vport = NULL;
-	struct lpfc_hba   *phba;
-	struct lpfc_sli   *psli;
-	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
-	struct Scsi_Host  *shost = NULL;
-	void *ptr;
-	unsigned long bar0map_len, bar2map_len;
-	int error = -ENODEV, retval;
-	int  i, hbq_count;
-	uint16_t iotag;
-	uint32_t cfg_mode, intr_mode;
-	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	struct lpfc_adapter_event_header adapter_event;
-
-	if (pci_enable_device_mem(pdev))
-		goto out;
-	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
-		goto out_disable_device;
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
-	phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
-	if (!phba)
-		goto out_release_regions;
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
 
-	atomic_set(&phba->fast_event_count, 0);
-	spin_lock_init(&phba->hbalock);
+	lpfc_stop_hba_timers(phba);
 
-	/* Initialize ndlp management spinlock */
-	spin_lock_init(&phba->ndlp_lock);
+	phba->pport->work_port_events = 0;
 
-	phba->pcidev = pdev;
+	lpfc_sli_hba_down(phba);
 
-	/* Assign an unused board number */
-	if ((phba->brd_no = lpfc_get_instance()) < 0)
-		goto out_free_phba;
+	lpfc_sli_brdrestart(phba);
 
-	INIT_LIST_HEAD(&phba->port_list);
-	init_waitqueue_head(&phba->wait_4_mlo_m_q);
-	/*
-	 * Get all the module params for configuring this host and then
-	 * establish the host.
-	 */
-	lpfc_get_cfgparam(phba);
-	phba->max_vpi = LPFC_MAX_VPI;
+	lpfc_sli_disable_intr(phba);
 
-	/* Initialize timers used by driver */
-	init_timer(&phba->hb_tmofunc);
-	phba->hb_tmofunc.function = lpfc_hb_timeout;
-	phba->hb_tmofunc.data = (unsigned long)phba;
+	return;
+}
 
-	psli = &phba->sli;
-	init_timer(&psli->mbox_tmo);
-	psli->mbox_tmo.function = lpfc_mbox_timeout;
-	psli->mbox_tmo.data = (unsigned long) phba;
-	init_timer(&phba->fcp_poll_timer);
-	phba->fcp_poll_timer.function = lpfc_poll_timeout;
-	phba->fcp_poll_timer.data = (unsigned long) phba;
-	init_timer(&phba->fabric_block_timer);
-	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
-	phba->fabric_block_timer.data = (unsigned long) phba;
-	init_timer(&phba->eratt_poll);
-	phba->eratt_poll.function = lpfc_poll_eratt;
-	phba->eratt_poll.data = (unsigned long) phba;
+/**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
-	pci_set_master(pdev);
-	pci_save_state(pdev);
-	pci_try_set_mwi(pdev);
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
 
-	if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(64)) != 0)
-		if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(32)) != 0)
-			goto out_idr_remove;
+	phba->pport->work_port_events = 0;
 
-	/*
-	 * Get the bus address of Bar0 and Bar2 and the number of bytes
-	 * required by each mapping.
-	 */
-	phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
-	bar0map_len        = pci_resource_len(phba->pcidev, 0);
+	lpfc_sli4_hba_down(phba);
 
-	phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
-	bar2map_len        = pci_resource_len(phba->pcidev, 2);
+	lpfc_sli4_disable_intr(phba);
 
-	/* Map HBA SLIM to a kernel virtual address. */
-	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
-	if (!phba->slim_memmap_p) {
-		error = -ENODEV;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for SLIM memory.\n");
-		goto out_idr_remove;
-	}
-
-	/* Map HBA Control Registers to a kernel virtual address. */
-	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
-	if (!phba->ctrl_regs_memmap_p) {
-		error = -ENODEV;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for HBA control registers.\n");
-		goto out_iounmap_slim;
-	}
+	return;
+}
 
-	/* Allocate memory for SLI-2 structures */
-	phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
-					       SLI2_SLIM_SIZE,
-					       &phba->slim2p.phys,
-					       GFP_KERNEL);
-	if (!phba->slim2p.virt)
-		goto out_iounmap;
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+	int wait_cnt = 0;
+	LPFC_MBOXQ_t *mboxq;
 
-	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
-	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
-	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
-	phba->IOCBs = (phba->slim2p.virt +
-		       offsetof(struct lpfc_sli2_slim, IOCBs));
+	lpfc_stop_hba_timers(phba);
+	phba->sli4_hba.intr_enable = 0;
 
-	phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
-						 lpfc_sli_hbq_size(),
-						 &phba->hbqslimp.phys,
-						 GFP_KERNEL);
-	if (!phba->hbqslimp.virt)
-		goto out_free_slim;
+	/*
+	 * Gracefully wait out the potential current outstanding asynchronous
+	 * mailbox command.
+	 */
 
-	hbq_count = lpfc_sli_hbq_count();
-	ptr = phba->hbqslimp.virt;
-	for (i = 0; i < hbq_count; ++i) {
-		phba->hbqs[i].hbq_virt = ptr;
-		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
-		ptr += (lpfc_hbq_defs[i]->entry_count *
-			sizeof(struct lpfc_hbq_entry));
+	/* First, block any pending async mailbox command from posted */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, trying to wait it out if we can */
+	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		msleep(10);
+		if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+			break;
 	}
-	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
-	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer  = lpfc_els_hbq_free;
-
-	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
-
-	INIT_LIST_HEAD(&phba->hbqbuf_in_list);
-
-	/* Initialize the SLI Layer to run with lpfc HBAs. */
-	lpfc_sli_setup(phba);
-	lpfc_sli_queue_setup(phba);
-
-	retval = lpfc_mem_alloc(phba);
-	if (retval) {
-		error = retval;
-		goto out_free_hbqslimp;
+	/* Forcefully release the outstanding mailbox command if timed out */
+	if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_lock_irq(&phba->hbalock);
+		mboxq = phba->sli.mbox_active;
+		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		__lpfc_mbox_cmpl_put(phba, mboxq);
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
+		spin_unlock_irq(&phba->hbalock);
 	}
 
-	/* Initialize and populate the iocb list per host.  */
-	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
-	for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
-		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
-		if (iocbq_entry == NULL) {
-			printk(KERN_ERR "%s: only allocated %d iocbs of "
-				"expected %d count. Unloading driver.\n",
-				__func__, i, LPFC_IOCB_LIST_CNT);
-			error = -ENOMEM;
-			goto out_free_iocbq;
-		}
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
 
-		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
-		if (iotag == 0) {
-			kfree (iocbq_entry);
-			printk(KERN_ERR "%s: failed to allocate IOTAG. "
-			       "Unloading driver.\n",
-				__func__);
-			error = -ENOMEM;
-			goto out_free_iocbq;
-		}
+	/* Disable PCI subsystem interrupt */
+	lpfc_sli4_disable_intr(phba);
 
-		spin_lock_irq(&phba->hbalock);
-		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
-		phba->total_iocbq_bufs++;
-		spin_unlock_irq(&phba->hbalock);
-	}
+	/* Stop kthread signal shall trigger work_done one more time */
+	kthread_stop(phba->worker_thread);
 
-	/* Initialize HBA structure */
-	phba->fc_edtov = FF_DEF_EDTOV;
-	phba->fc_ratov = FF_DEF_RATOV;
-	phba->fc_altov = FF_DEF_ALTOV;
-	phba->fc_arbtov = FF_DEF_ARBTOV;
+	/* Stop the SLI4 device port */
+	phba->pport->work_port_events = 0;
+}
 
-	INIT_LIST_HEAD(&phba->work_list);
-	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
-	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+/**
+ * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be called to attach a device with SLI-3 interface spec
+ * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it can
+ * support this kind of device. If the match is successful, the driver core
+ * invokes this routine. If this routine determines it can claim the HBA, it
+ * does all the initialization that it needs to do to handle the HBA properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
 
-	/* Initialize the wait queue head for the kernel thread */
-	init_waitqueue_head(&phba->work_waitq);
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
 
-	/* Startup the kernel thread for this host adapter. */
-	phba->worker_thread = kthread_run(lpfc_do_work, phba,
-				       "lpfc_worker_%d", phba->brd_no);
-	if (IS_ERR(phba->worker_thread)) {
-		error = PTR_ERR(phba->worker_thread);
-		goto out_free_iocbq;
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1401 Failed to enable pci device.\n");
+		goto out_free_phba;
 	}
 
-	/* Initialize the list of scsi buffers used by driver for scsi IO. */
-	spin_lock_init(&phba->scsi_buf_list_lock);
-	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+	/* Set up SLI API function jump table for PCI-device group-0 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
+	if (error)
+		goto out_disable_pci_dev;
 
-	/* Initialize list of fabric iocbs */
-	INIT_LIST_HEAD(&phba->fabric_iocb_list);
+	/* Set up SLI-3 specific device PCI memory space */
+	error = lpfc_sli_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1402 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
 
-	/* Initialize list to save ELS buffers */
-	INIT_LIST_HEAD(&phba->elsbuf);
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1403 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s3;
+	}
 
-	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
-	if (!vport)
-		goto out_kthread_stop;
+	/* Set up SLI-3 specific device driver resources */
+	error = lpfc_sli_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1404 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s3;
+	}
 
-	shost = lpfc_shost_from_vport(vport);
-	phba->pport = vport;
-	lpfc_debugfs_initialize(vport);
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1405 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s3;
+	}
 
-	pci_set_drvdata(pdev, shost);
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1406 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
 
-	phba->MBslimaddr = phba->slim_memmap_p;
-	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
-	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
-	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
-	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1407 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
 
 	/* Configure sysfs attributes */
-	if (lpfc_alloc_sysfs_attr(vport)) {
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1476 Failed to allocate sysfs attr\n");
-		error = -ENOMEM;
-		goto out_destroy_port;
+		goto out_destroy_shost;
 	}
 
+	/* Now, trying to enable interrupt and bring up the device */
 	cfg_mode = phba->cfg_use_msi;
 	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
 		/* Configure and enable interrupt */
-		intr_mode = lpfc_enable_intr(phba, cfg_mode);
+		intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
 		if (intr_mode == LPFC_INTR_ERROR) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"0426 Failed to enable interrupt.\n");
+					"0431 Failed to enable interrupt.\n");
+			error = -ENODEV;
 			goto out_free_sysfs_attr;
 		}
-		/* HBA SLI setup */
+		/* SLI-3 HBA setup */
 		if (lpfc_sli_hba_setup(phba)) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"1477 Failed to set up hba\n");
@@ -2902,185 +6796,65 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 		/* Wait 50ms for the interrupts of previous mailbox commands */
 		msleep(50);
-		/* Check active interrupts received */
-		if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+		/* Check active interrupts on message signaled interrupts */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
 			/* Log the current active interrupt mode */
 			phba->intr_mode = intr_mode;
 			lpfc_log_intr_mode(phba, intr_mode);
 			break;
 		} else {
 			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0451 Configure interrupt mode (%d) "
+					"0447 Configure interrupt mode (%d) "
 					"failed active interrupt test.\n",
 					intr_mode);
-			if (intr_mode == 0) {
-				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-						"0479 Failed to enable "
-						"interrupt.\n");
-				error = -ENODEV;
-				goto out_remove_device;
-			}
-			/* Stop HBA SLI setups */
-			lpfc_stop_port(phba);
 			/* Disable the current interrupt mode */
-			lpfc_disable_intr(phba);
+			lpfc_sli_disable_intr(phba);
 			/* Try next level of interrupt mode */
 			cfg_mode = --intr_mode;
 		}
 	}
 
-	/*
-	 * hba setup may have changed the hba_queue_depth so we need to adjust
-	 * the value of can_queue.
-	 */
-	shost->can_queue = phba->cfg_hba_queue_depth - 10;
-	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
-
-		if (lpfc_prot_mask && lpfc_prot_guard) {
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"1478 Registering BlockGuard with the "
-					"SCSI layer\n");
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
 
-			scsi_host_set_prot(shost, lpfc_prot_mask);
-			scsi_host_set_guard(shost, lpfc_prot_guard);
-		}
-	}
-
-	if (!_dump_buf_data) {
-		int pagecnt = 10;
-		while (pagecnt) {
-			spin_lock_init(&_dump_buf_lock);
-			_dump_buf_data =
-				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
-			if (_dump_buf_data) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
-						"_dump_buf_data at 0x%p\n",
-						(1 << pagecnt), _dump_buf_data);
-				_dump_buf_data_order = pagecnt;
-				memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT)
-							   << pagecnt));
-				break;
-			} else {
-				--pagecnt;
-			}
-
-		}
-
-		if (!_dump_buf_data_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
-					"memory for hexdump\n");
-
-	} else {
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
-		       "\n", _dump_buf_data);
-	}
-
-
-	if (!_dump_buf_dif) {
-		int pagecnt = 10;
-		while (pagecnt) {
-			_dump_buf_dif =
-				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
-			if (_dump_buf_dif) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
-						"_dump_buf_dif at 0x%p\n",
-						(1 << pagecnt), _dump_buf_dif);
-				_dump_buf_dif_order = pagecnt;
-				memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT)
-							  << pagecnt));
-				break;
-			} else {
-				--pagecnt;
-			}
-
-		}
-
-		if (!_dump_buf_dif_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
-					"memory for hexdump\n");
-
-	} else {
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
-				_dump_buf_dif);
-	}
-
-	lpfc_host_attrib_init(shost);
-
-	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		spin_lock_irq(shost->host_lock);
-		lpfc_poll_start_timer(phba);
-		spin_unlock_irq(shost->host_lock);
-	}
-
-	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-			"0428 Perform SCSI scan\n");
-	/* Send board arrival event to upper layer */
-	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
-	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-		sizeof(adapter_event),
-		(char *) &adapter_event,
-		LPFC_NL_VENDOR_ID);
+	/* Check if there are static vports to be created. */
+	lpfc_create_static_vport(phba);
 
 	return 0;
 
 out_remove_device:
-	spin_lock_irq(shost->host_lock);
-	vport->load_flag |= FC_UNLOADING;
-	spin_unlock_irq(shost->host_lock);
-	lpfc_stop_phba_timers(phba);
-	phba->pport->work_port_events = 0;
-	lpfc_disable_intr(phba);
-	lpfc_sli_hba_down(phba);
-	lpfc_sli_brdrestart(phba);
+	lpfc_unset_hba(phba);
 out_free_sysfs_attr:
 	lpfc_free_sysfs_attr(vport);
-out_destroy_port:
-	destroy_port(vport);
-out_kthread_stop:
-	kthread_stop(phba->worker_thread);
-out_free_iocbq:
-	list_for_each_entry_safe(iocbq_entry, iocbq_next,
-						&phba->lpfc_iocb_list, list) {
-		kfree(iocbq_entry);
-		phba->total_iocbq_bufs--;
-	}
-	lpfc_mem_free(phba);
-out_free_hbqslimp:
-	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
-			  phba->hbqslimp.virt, phba->hbqslimp.phys);
-out_free_slim:
-	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
-			  phba->slim2p.virt, phba->slim2p.phys);
-out_iounmap:
-	iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
-	iounmap(phba->slim_memmap_p);
-out_idr_remove:
-	idr_remove(&lpfc_hba_index, phba->brd_no);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s3:
+	lpfc_sli_driver_resource_unset(phba);
+out_unset_pci_mem_s3:
+	lpfc_sli_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
 out_free_phba:
-	kfree(phba);
-out_release_regions:
-	pci_release_selected_regions(pdev, bars);
-out_disable_device:
-	pci_disable_device(pdev);
-out:
-	pci_set_drvdata(pdev, NULL);
-	if (shost)
-		scsi_host_put(shost);
+	lpfc_hba_free(phba);
 	return error;
 }
 
 /**
- * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
+ * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
  * @pdev: pointer to PCI device
  *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
- * for the HBA device to be removed from the PCI subsystem properly.
+ * This routine is to be called to disattach a device with SLI-3 interface
+ * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
  **/
 static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
+lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host  *shost = pci_get_drvdata(pdev);
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3098,7 +6872,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	/* Release all the vports against this physical port */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
 			fc_vport_terminate(vports[i]->fc_vport);
 	lpfc_destroy_vport_work_array(phba, vports);
 
@@ -3120,7 +6894,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	/* Final cleanup of txcmplq and reset the HBA */
 	lpfc_sli_brdrestart(phba);
 
-	lpfc_stop_phba_timers(phba);
+	lpfc_stop_hba_timers(phba);
 	spin_lock_irq(&phba->hbalock);
 	list_del_init(&vport->listentry);
 	spin_unlock_irq(&phba->hbalock);
@@ -3128,7 +6902,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	lpfc_debugfs_terminate(vport);
 
 	/* Disable interrupt */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	pci_set_drvdata(pdev, NULL);
 	scsi_host_put(shost);
@@ -3138,7 +6912,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	 * corresponding pools here.
 	 */
 	lpfc_scsi_free(phba);
-	lpfc_mem_free(phba);
+	lpfc_mem_free_all(phba);
 
 	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
 			  phba->hbqslimp.virt, phba->hbqslimp.phys);
@@ -3151,36 +6925,35 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	iounmap(phba->ctrl_regs_memmap_p);
 	iounmap(phba->slim_memmap_p);
 
-	idr_remove(&lpfc_hba_index, phba->brd_no);
-
-	kfree(phba);
+	lpfc_hba_free(phba);
 
 	pci_release_selected_regions(pdev, bars);
 	pci_disable_device(pdev);
 }
 
 /**
- * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
+ * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
  * @pdev: pointer to PCI device
  * @msg: power management message
  *
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it quiesces the
- * device by stopping the driver's worker thread for the device, turning off
- * device's interrupt and DMA, and bring the device offline. Note that as the
- * driver implements the minimum PM requirements to a power-aware driver's PM
- * support for suspend/resume -- all the possible PM messages (SUSPEND,
- * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
- * and the driver will fully reinitialize its device during resume() method
- * call, the driver will set device to PCI_D3hot state in PCI config space
- * instead of setting it according to the @msg provided by the PM.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When
+ * PM invokes this method, it quiesces the device by stopping the driver's
+ * worker thread for the device, turning off device's interrupt and DMA,
+ * and bring the device offline. Note that as the driver implements the
+ * minimum PM requirements to a power-aware driver's PM support for the
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver will
+ * fully reinitialize its device during resume() method call, the driver will
+ * set device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
  *
  * Return code
- *   0 - driver suspended the device
- *   Error otherwise
+ * 	0 - driver suspended the device
+ * 	Error otherwise
  **/
 static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3194,7 +6967,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
 	kthread_stop(phba->worker_thread);
 
 	/* Disable interrupt from device */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	/* Save device state to PCI config space */
 	pci_save_state(pdev);
@@ -3204,25 +6977,26 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
 }
 
 /**
- * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
+ * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
  * @pdev: pointer to PCI device
  *
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it restores
- * the device's PCI config space state and fully reinitializes the device
- * and brings it online. Note that as the driver implements the minimum PM
- * requirements to a power-aware driver's PM for suspend/resume -- all
- * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
- * method call will be treated as SUSPEND and the driver will fully
- * reinitialize its device during resume() method call, the device will be
- * set to PCI_D0 directly in PCI config space before restoring the state.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When PM
+ * invokes this method, it restores the device's PCI config space state and
+ * fully reinitializes the device and brings it online. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's
+ * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
+ * FREEZE) to the suspend() method call will be treated as SUSPEND and the
+ * driver will fully reinitialize its device during resume() method call,
+ * the device will be set to PCI_D0 directly in PCI config space before
+ * restoring the state.
  *
  * Return code
- *   0 - driver suspended the device
- *   Error otherwise
+ * 	0 - driver suspended the device
+ * 	Error otherwise
  **/
 static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+lpfc_pci_resume_one_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3250,7 +7024,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
 	}
 
 	/* Configure and enable interrupt */
-	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0430 PM resume Failed to enable interrupt\n");
@@ -3269,23 +7043,24 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
+ * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
  * @pdev: pointer to PCI device.
  * @state: the current PCI connection state.
  *
- * This routine is registered to the PCI subsystem for error handling. This
- * function is called by the PCI subsystem after a PCI bus error affecting
- * this device has been detected. When this function is invoked, it will
- * need to stop all the I/Os and interrupt(s) to the device. Once that is
- * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
- * perform proper recovery as desired.
+ * This routine is called from the PCI subsystem for I/O error handling to
+ * device with SLI-3 interface spec. This function is called by the PCI
+ * subsystem after a PCI bus error affecting this device has been detected.
+ * When this function is invoked, it will need to stop all the I/Os and
+ * interrupt(s) to the device. Once that is done, it will return
+ * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
+ * as desired.
  *
  * Return codes
- *   PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
- *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
  **/
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
-				pci_channel_state_t state)
+static pci_ers_result_t
+lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3312,30 +7087,32 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
 	lpfc_sli_abort_iocb_ring(phba, pring);
 
 	/* Disable interrupt */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
 }
 
 /**
- * lpfc_io_slot_reset - Restart a PCI device from scratch
+ * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
  * @pdev: pointer to PCI device.
  *
- * This routine is registered to the PCI subsystem for error handling. This is
- * called after PCI bus has been reset to restart the PCI card from scratch,
- * as if from a cold-boot. During the PCI subsystem error recovery, after the
- * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
- * proper error recovery and then call this routine before calling the .resume
- * method to recover the device. This function will initialize the HBA device,
- * enable the interrupt, but it will just put the HBA to offline state without
- * passing any I/O traffic.
+ * This routine is called from the PCI subsystem for error handling to
+ * device with SLI-3 interface spec. This is called after PCI bus has been
+ * reset to restart the PCI card from scratch, as if from a cold-boot.
+ * During the PCI subsystem error recovery, after driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method
+ * to recover the device. This function will initialize the HBA device,
+ * enable the interrupt, but it will just put the HBA to offline state
+ * without passing any I/O traffic.
  *
  * Return codes
- *   PCI_ERS_RESULT_RECOVERED - the device has been recovered
- *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
  */
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+static pci_ers_result_t
+lpfc_io_slot_reset_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3354,11 +7131,11 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
 		pci_set_master(pdev);
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Configure and enable interrupt */
-	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0427 Cannot re-enable interrupt after "
@@ -3378,20 +7155,713 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_io_resume - Resume PCI I/O operation
+ * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
  * @pdev: pointer to PCI device
  *
- * This routine is registered to the PCI subsystem for error handling. It is
- * called when kernel error recovery tells the lpfc driver that it is ok to
- * resume normal PCI operation after PCI bus error recovery. After this call,
- * traffic can start to flow from this device again.
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-3 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
  */
-static void lpfc_io_resume(struct pci_dev *pdev)
+static void
+lpfc_io_resume_s3(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	lpfc_online(phba);
+}
+
+/**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+	int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+	if (max_xri <= 100)
+		return 4;
+	else if (max_xri <= 256)
+		return 8;
+	else if (max_xri <= 512)
+		return 16;
+	else if (max_xri <= 1024)
+		return 32;
+	else
+		return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
+	int mcnt;
+
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
+
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1409 Failed to enable pci device.\n");
+		goto out_free_phba;
+	}
+
+	/* Set up SLI API function jump table for PCI-device group-1 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+	if (error)
+		goto out_disable_pci_dev;
+
+	/* Set up SLI-4 specific device PCI memory space */
+	error = lpfc_sli4_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1410 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
+
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1411 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Set up SLI-4 Specific device driver resources */
+	error = lpfc_sli4_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1412 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba,
+			phba->sli4_hba.max_cfg_param.max_xri);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1413 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s4;
+	}
+
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1414 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
+
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1415 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
+
+	/* Configure sysfs attributes */
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1416 Failed to allocate sysfs attr\n");
+		goto out_destroy_shost;
+	}
+
+	/* Now, trying to enable interrupt and bring up the device */
+	cfg_mode = phba->cfg_use_msi;
+	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
+		/* Configure and enable interrupt */
+		intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+		if (intr_mode == LPFC_INTR_ERROR) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0426 Failed to enable interrupt.\n");
+			error = -ENODEV;
+			goto out_free_sysfs_attr;
+		}
+		/* Set up SLI-4 HBA */
+		if (lpfc_sli4_hba_setup(phba)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1421 Failed to set up hba\n");
+			error = -ENODEV;
+			goto out_disable_intr;
+		}
+
+		/* Send NOP mbx cmds for non-INTx mode active interrupt test */
+		if (intr_mode != 0)
+			mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+							    LPFC_ACT_INTR_CNT);
+
+		/* Check active interrupts received only for MSI/MSI-X */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+			/* Log the current active interrupt mode */
+			phba->intr_mode = intr_mode;
+			lpfc_log_intr_mode(phba, intr_mode);
+			break;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0451 Configure interrupt mode (%d) "
+				"failed active interrupt test.\n",
+				intr_mode);
+		/* Unset the preivous SLI-4 HBA setup */
+		lpfc_sli4_unset_hba(phba);
+		/* Try next level of interrupt mode */
+		cfg_mode = --intr_mode;
+	}
+
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
+
+	return 0;
+
+out_disable_intr:
+	lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+	lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+	lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+	lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
+out_free_phba:
+	lpfc_hba_free(phba);
+	return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_vport **vports;
+	struct lpfc_hba *phba = vport->phba;
+	int i;
+
+	/* Mark the device unloading flag */
+	spin_lock_irq(&phba->hbalock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Free the HBA sysfs attributes */
+	lpfc_free_sysfs_attr(vport);
+
+	/* Release all the vports against this physical port */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+			fc_vport_terminate(vports[i]->fc_vport);
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Remove FC host and then SCSI host with the physical port */
+	fc_remove_host(shost);
+	scsi_remove_host(shost);
+
+	/* Perform cleanup on the physical port */
+	lpfc_cleanup(vport);
+
+	/*
+	 * Bring down the SLI Layer. This step disables all interrupts,
+	 * clears the rings, discards all mailbox commands, and resets
+	 * the HBA FCoE function.
+	 */
+	lpfc_debugfs_terminate(vport);
+	lpfc_sli4_hba_unset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	list_del_init(&vport->listentry);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+	 * buffers are released to their corresponding pools here.
+	 */
+	lpfc_scsi_free(phba);
+	lpfc_sli4_driver_resource_unset(phba);
+
+	/* Unmap adapter Control and Doorbell registers */
+	lpfc_sli4_pci_mem_unset(phba);
+
+	/* Release PCI resources and disable device's PCI function */
+	scsi_host_put(shost);
+	lpfc_disable_pci_dev(phba);
+
+	/* Finally, free the driver's device data structure */
+	lpfc_hba_free(phba);
+
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0298 PCI device Power Management suspend.\n");
+
+	/* Bring down the device */
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	kthread_stop(phba->worker_thread);
+
+	/* Disable interrupt from device */
+	lpfc_sli4_disable_intr(phba);
+
+	/* Save device state to PCI config space */
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	uint32_t intr_mode;
+	int error;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0292 PCI device Power Management resume.\n");
+
+	/* Restore device state from PCI config space */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	if (pdev->is_busmaster)
+		pci_set_master(pdev);
+
+	 /* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					"lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0293 PM resume failed to start worker "
+				"thread: error=x%x.\n", error);
+		return error;
+	}
+
+	/* Configure and enable interrupt */
+	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+	if (intr_mode == LPFC_INTR_ERROR) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0294 PM resume Failed to enable interrupt\n");
+		return -EIO;
+	} else
+		phba->intr_mode = intr_mode;
+
+	/* Restart HBA and bring it online */
+	lpfc_sli_brdrestart(phba);
 	lpfc_online(phba);
+
+	/* Log the current active interrupt mode */
+	lpfc_log_intr_mode(phba, phba->intr_mode);
+
+	return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+	return;
+}
+
+/**
+ * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
+ * at PCI device-specific information of the device and driver to see if the
+ * driver state that it can support this kind of device. If the match is
+ * successful, the driver core invokes this routine. This routine dispatches
+ * the action to the proper SLI-3 or SLI-4 device probing routine, which will
+ * do all the initialization that it needs to do to handle the HBA device
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	int rc;
+	uint16_t dev_id;
+
+	if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+		return -ENODEV;
+
+	switch (dev_id) {
+	case PCI_DEVICE_ID_TIGERSHARK:
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		rc = lpfc_pci_probe_one_s4(pdev, pid);
+		break;
+	default:
+		rc = lpfc_pci_probe_one_s3(pdev, pid);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
+ * This routine dispatches the action to the proper SLI-3 or SLI-4 device
+ * remove routine, which will perform all the necessary cleanup for the
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		lpfc_pci_remove_one_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_pci_remove_one_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1424 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
+ * suspend the device.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	int rc = -ENODEV;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_pci_suspend_one_s3(pdev, msg);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_suspend_one_s4(pdev, msg);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1425 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device resume routine, which will
+ * resume the device.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	int rc = -ENODEV;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_pci_resume_one_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_resume_one_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1426 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_error_detected - lpfc method for handling PCI I/O error
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called by the PCI subsystem after a PCI bus error affecting
+ * this device has been detected. When this routine is invoked, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device error detected handling
+ * routine, which will perform the proper error detected operation.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_io_error_detected_s3(pdev, state);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_error_detected_s4(pdev, state);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1427 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called after PCI bus has been reset to restart the PCI card
+ * from scratch, as if from a cold-boot. When this routine is invoked, it
+ * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
+ * routine, which will perform the proper device reset.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_io_slot_reset_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_slot_reset_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1428 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_resume - lpfc method for resuming PCI I/O operation
+ * @pdev: pointer to PCI device
+ *
+ * This routine is registered to the PCI subsystem for error handling. It
+ * is called when kernel error recovery tells the lpfc driver that it is
+ * OK to resume normal PCI operation after PCI bus error recovery. When
+ * this routine is invoked, it dispatches the action to the proper SLI-3
+ * or SLI-4 device io_resume routine, which will resume the device operation.
+ **/
+static void
+lpfc_io_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		lpfc_io_resume_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_io_resume_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1429 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return;
 }
 
 static struct pci_device_id lpfc_id_table[] = {
@@ -3469,6 +7939,10 @@ static struct pci_device_id lpfc_id_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
 		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
+		PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0 }
 };
 
@@ -3486,7 +7960,7 @@ static struct pci_driver lpfc_driver = {
 	.probe		= lpfc_pci_probe_one,
 	.remove		= __devexit_p(lpfc_pci_remove_one),
 	.suspend        = lpfc_pci_suspend_one,
-	.resume         = lpfc_pci_resume_one,
+	.resume		= lpfc_pci_resume_one,
 	.err_handler    = &lpfc_err_handler,
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 1aa85709b01..954ba57970a 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,33 +18,39 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LOG_ELS                       0x1	/* ELS events */
-#define LOG_DISCOVERY                 0x2	/* Link discovery events */
-#define LOG_MBOX                      0x4	/* Mailbox events */
-#define LOG_INIT                      0x8	/* Initialization events */
-#define LOG_LINK_EVENT                0x10	/* Link events */
-#define LOG_IP                        0x20	/* IP traffic history */
-#define LOG_FCP                       0x40	/* FCP traffic history */
-#define LOG_NODE                      0x80	/* Node table events */
-#define LOG_TEMP                      0x100	/* Temperature sensor events */
-#define LOG_BG			      0x200	/* BlockGuard events */
-#define LOG_MISC                      0x400	/* Miscellaneous events */
-#define LOG_SLI                       0x800	/* SLI events */
-#define LOG_FCP_ERROR                 0x1000	/* log errors, not underruns */
-#define LOG_LIBDFC                    0x2000	/* Libdfc events */
-#define LOG_VPORT                     0x4000	/* NPIV events */
-#define LOG_ALL_MSG                   0xffff	/* LOG all messages */
+#define LOG_ELS		0x00000001	/* ELS events */
+#define LOG_DISCOVERY	0x00000002	/* Link discovery events */
+#define LOG_MBOX	0x00000004	/* Mailbox events */
+#define LOG_INIT	0x00000008	/* Initialization events */
+#define LOG_LINK_EVENT	0x00000010	/* Link events */
+#define LOG_IP		0x00000020	/* IP traffic history */
+#define LOG_FCP		0x00000040	/* FCP traffic history */
+#define LOG_NODE	0x00000080	/* Node table events */
+#define LOG_TEMP	0x00000100	/* Temperature sensor events */
+#define LOG_BG		0x00000200	/* BlockGuard events */
+#define LOG_MISC	0x00000400	/* Miscellaneous events */
+#define LOG_SLI		0x00000800	/* SLI events */
+#define LOG_FCP_ERROR	0x00001000	/* log errors, not underruns */
+#define LOG_LIBDFC	0x00002000	/* Libdfc events */
+#define LOG_VPORT	0x00004000	/* NPIV events */
+#define LOF_SECURITY	0x00008000	/* Security events */
+#define LOG_EVENT	0x00010000	/* CT,TEMP,DUMP, logging */
+#define LOG_ALL_MSG	0xffffffff	/* LOG all messages */
 
 #define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
-	do { \
-	{ if (((mask) &(vport)->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+	{ if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '3')) \
 		dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
 			   fmt, (vport)->phba->brd_no, vport->vpi, ##arg); } \
-	} while (0)
+} while (0)
 
 #define lpfc_printf_log(phba, level, mask, fmt, arg...) \
-	do { \
-	{ if (((mask) &(phba)->pport->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+	{ uint32_t log_verbose = (phba)->pport ? \
+				 (phba)->pport->cfg_log_verbose : \
+				 (phba)->cfg_log_verbose; \
+	  if (((mask) & log_verbose) || (level[1] <= '3')) \
 		dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
-			   fmt, phba->brd_no, ##arg); } \
-	} while (0)
+			   fmt, phba->brd_no, ##arg); \
+	} \
+} while (0)
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7fc212..b9b451c0901 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -39,6 +41,44 @@
 #include "lpfc_compat.h"
 
 /**
+ * lpfc_dump_static_vport - Dump HBA's static vport information.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset for dumping vport info.
+ *
+ * The dump mailbox command provides a method for the device driver to obtain
+ * various types of information from the HBA device.
+ *
+ * This routine prepares the mailbox command for dumping list of static
+ * vports to be created.
+ **/
+void
+lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+		uint16_t offset)
+{
+	MAILBOX_t *mb;
+	void *ctx;
+
+	mb = &pmb->u.mb;
+	ctx = pmb->context2;
+
+	/* Setup to dump vport info region */
+	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+	mb->mbxCommand = MBX_DUMP_MEMORY;
+	mb->un.varDmp.cv = 1;
+	mb->un.varDmp.type = DMP_NV_PARAMS;
+	mb->un.varDmp.entry_index = offset;
+	mb->un.varDmp.region_id = DMP_REGION_VPORT;
+	mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t);
+	mb->un.varDmp.co = 0;
+	mb->un.varDmp.resp_offset = 0;
+	pmb->context2 = ctx;
+	mb->mbxOwner = OWN_HOST;
+
+	return;
+}
+
+/**
  * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -58,7 +98,7 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
 	MAILBOX_t *mb;
 	void *ctx;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	ctx = pmb->context2;
 
 	/* Setup to dump VPD region */
@@ -90,7 +130,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	MAILBOX_t *mb;
 	void *ctx;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	/* Save context so that we can restore after memset */
 	ctx = pmb->context2;
 
@@ -125,7 +165,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_READ_NV;
 	mb->mbxOwner = OWN_HOST;
@@ -151,7 +191,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_ASYNCEVT_ENABLE;
 	mb->un.varCfgAsyncEvent.ring = ring;
@@ -177,7 +217,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_HEARTBEAT;
 	mb->mbxOwner = OWN_HOST;
@@ -211,7 +251,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
 	struct lpfc_sli *psli;
 
 	psli = &phba->sli;
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	INIT_LIST_HEAD(&mp->list);
@@ -248,7 +288,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varClearLA.eventTag = phba->fc_eventTag;
@@ -275,7 +315,7 @@ void
 lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	struct lpfc_vport  *vport = phba->pport;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	/* NEW_FEATURE
@@ -321,7 +361,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 int
 lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t attentionConditions[2];
 
 	/* Sanity check */
@@ -405,7 +445,7 @@ lpfc_init_link(struct lpfc_hba * phba,
 	struct lpfc_sli *psli;
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	psli = &phba->sli;
@@ -492,7 +532,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 	struct lpfc_sli *psli;
 
 	psli = &phba->sli;
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxOwner = OWN_HOST;
@@ -515,7 +555,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 	mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
 	mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
 	mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
-	mb->un.varRdSparm.vpi = vpi;
+	mb->un.varRdSparm.vpi = vpi + phba->vpi_base;
 
 	/* save address for completion */
 	pmb->context1 = mp;
@@ -544,10 +584,12 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varUnregDID.did = did;
+	if (vpi != 0xffff)
+		vpi += phba->vpi_base;
 	mb->un.varUnregDID.vpi = vpi;
 
 	mb->mbxCommand = MBX_UNREG_D_ID;
@@ -573,7 +615,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxCommand = MBX_READ_CONFIG;
@@ -598,7 +640,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxCommand = MBX_READ_LNK_STAT;
@@ -607,7 +649,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_reg_login - Prepare a mailbox command for registering remote login
+ * lpfc_reg_rpi - Prepare a mailbox command for registering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -631,17 +673,23 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
  *    1 - DMA memory allocation failed
  **/
 int
-lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
+lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 	       uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint8_t *sparam;
 	struct lpfc_dmabuf *mp;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varRegLogin.rpi = 0;
-	mb->un.varRegLogin.vpi = vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba);
+		if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
+			return 1;
+	}
+
+	mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
 	mb->un.varRegLogin.did = did;
 	mb->un.varWords[30] = flag;	/* Set flag to issue action on cmpl */
 
@@ -697,15 +745,16 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varUnregLogin.rpi = (uint16_t) rpi;
 	mb->un.varUnregLogin.rsvd1 = 0;
-	mb->un.varUnregLogin.vpi = vpi;
+	mb->un.varUnregLogin.vpi = vpi + phba->vpi_base;
 
 	mb->mbxCommand = MBX_UNREG_LOGIN;
 	mb->mbxOwner = OWN_HOST;
+
 	return;
 }
 
@@ -725,15 +774,15 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
  * This routine prepares the mailbox command for registering a virtual N_Port.
  **/
 void
-lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
-	     LPFC_MBOXQ_t *pmb)
+lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	mb->un.varRegVpi.vpi = vpi;
-	mb->un.varRegVpi.sid = sid;
+	mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
+	mb->un.varRegVpi.sid = vport->fc_myDID;
+	mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
 
 	mb->mbxCommand = MBX_REG_VPI;
 	mb->mbxOwner = OWN_HOST;
@@ -760,10 +809,10 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
 void
 lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	mb->un.varUnregVpi.vpi = vpi;
+	mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
 
 	mb->mbxCommand = MBX_UNREG_VPI;
 	mb->mbxOwner = OWN_HOST;
@@ -852,7 +901,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
 void
 lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->un.varRdRev.cv = 1;
 	mb->un.varRdRev.v3req = 1; /* Request SLI3 info */
@@ -945,7 +994,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
 		uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb)
 {
 	int i;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct config_hbq_var *hbqmb = &mb->un.varCfgHbq;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
@@ -1020,7 +1069,7 @@ void
 lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
 {
 	int i;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_sli *psli;
 	struct lpfc_sli_ring *pring;
 
@@ -1075,7 +1124,7 @@ void
 lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	dma_addr_t pdma_addr;
 	uint32_t bar_low, bar_high;
 	size_t offset;
@@ -1099,21 +1148,22 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	/* If HBA supports SLI=3 ask for it */
 
-	if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
+	if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
 		if (phba->cfg_enable_bg)
 			mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
+		mb->un.varCfgPort.cdss = 1; /* Configure Security */
 		mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
 		mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
 		mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
 		mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
 		if (phba->max_vpi && phba->cfg_enable_npiv &&
 		    phba->vpd.sli3Feat.cmv) {
-			mb->un.varCfgPort.max_vpi = phba->max_vpi;
+			mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI;
 			mb->un.varCfgPort.cmv = 1;
 		} else
 			mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
 	} else
-		phba->sli_rev = 2;
+		phba->sli_rev = LPFC_SLI_REV2;
 	mb->un.varCfgPort.sli_mode = phba->sli_rev;
 
 	/* Now setup pcb */
@@ -1245,7 +1295,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 void
 lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_KILL_BOARD;
@@ -1305,29 +1355,98 @@ lpfc_mbox_get(struct lpfc_hba * phba)
 }
 
 /**
+ * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list
+ * @phba: pointer to lpfc hba data structure.
+ * @mbq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine put the completed mailbox command into the mailbox command
+ * complete list. This is the unlocked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
+ **/
+void
+__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
+{
+	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+}
+
+/**
  * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
  * This routine put the completed mailbox command into the mailbox command
- * complete list. This routine is called from driver interrupt handler
- * context.The mailbox complete list is used by the driver worker thread
- * to process mailbox complete callback functions outside the driver interrupt
- * handler.
+ * complete list. This is the locked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
  **/
 void
-lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
+lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
 {
 	unsigned long iflag;
 
 	/* This function expects to be called from interrupt context */
 	spin_lock_irqsave(&phba->hbalock, iflag);
-	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+	__lpfc_mbox_cmpl_put(phba, mbq);
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 	return;
 }
 
 /**
+ * lpfc_mbox_cmd_check - Check the validality of a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is to check whether a mailbox command is valid to be issued.
+ * This check will be performed by both the mailbox issue API when a client
+ * is to issue a mailbox command to the mailbox transport.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	/* Mailbox command that have a completion handler must also have a
+	 * vport specified.
+	 */
+	if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
+	    mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
+		if (!mboxq->vport) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT,
+					"1814 Mbox x%x failed, no vport\n",
+					mboxq->u.mb.mbxCommand);
+			dump_stack();
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+/**
+ * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to check whether the HBA device is ready for posting a
+ * mailbox command. It is used by the mailbox transport API at the time the
+ * to post a mailbox command to the device.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_dev_check(struct lpfc_hba *phba)
+{
+	/* If the PCI channel is in offline state, do not issue mbox */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -ENODEV;
+
+	/* If the HBA is in error state, do not issue mbox */
+	if (phba->link_state == LPFC_HBA_ERROR)
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
  * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
  * @phba: pointer to lpfc hba data structure.
  * @cmd: mailbox command code.
@@ -1350,6 +1469,475 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
 	case MBX_WRITE_WWN:     /* 0x98 */
 	case MBX_LOAD_EXP_ROM:	/* 0x9C */
 		return LPFC_MBOX_TMO_FLASH_CMD;
+	case MBX_SLI4_CONFIG:	/* 0x9b */
+		return LPFC_MBOX_SLI4_CONFIG_TMO;
 	}
 	return LPFC_MBOX_TMO;
 }
+
+/**
+ * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ * @phyaddr: physical address for the sge
+ * @length: Length of the sge.
+ *
+ * This routine sets up an entry in the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry,
+		      dma_addr_t phyaddr, uint32_t length)
+{
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+	nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+				&mbox->u.mqe.un.nembed_cmd;
+	nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr);
+	nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr);
+	nembed_sge->sge[sgentry].length = length;
+}
+
+/**
+ * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ *
+ * This routine gets an entry from the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry,
+		      struct lpfc_mbx_sge *sge)
+{
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+	nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+				&mbox->u.mqe.un.nembed_cmd;
+	sge->pa_lo = nembed_sge->sge[sgentry].pa_lo;
+	sge->pa_hi = nembed_sge->sge[sgentry].pa_hi;
+	sge->length = nembed_sge->sge[sgentry].length;
+}
+
+/**
+ * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine frees SLI4 specific mailbox command for sending IOCTL command.
+ **/
+void
+lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_config *sli4_cfg;
+	struct lpfc_mbx_sge sge;
+	dma_addr_t phyaddr;
+	uint32_t sgecount, sgentry;
+
+	sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+	/* For embedded mbox command, just free the mbox command */
+	if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* For non-embedded mbox command, we need to free the pages first */
+	sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr);
+	/* There is nothing we can do if there is no sge address array */
+	if (unlikely(!mbox->sge_array)) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+	/* Each non-embedded DMA memory was allocated in the length of a page */
+	for (sgentry = 0; sgentry < sgecount; sgentry++) {
+		lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge);
+		phyaddr = getPaddr(sge.pa_hi, sge.pa_lo);
+		dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE,
+				  mbox->sge_array->addr[sgentry], phyaddr);
+	}
+	/* Free the sge address array memory */
+	kfree(mbox->sge_array);
+	/* Finally, free the mailbox command itself */
+	mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_config - Initialize the  SLI4 Config Mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ * @subsystem: The sli4 config sub mailbox subsystem.
+ * @opcode: The sli4 config sub mailbox command opcode.
+ * @length: Length of the sli4 config mailbox command.
+ *
+ * This routine sets up the header fields of SLI4 specific mailbox command
+ * for sending IOCTL command.
+ *
+ * Return: the actual length of the mbox command allocated (mostly useful
+ *         for none embedded mailbox command).
+ **/
+int
+lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
+		 uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb)
+{
+	struct lpfc_mbx_sli4_config *sli4_config;
+	union lpfc_sli4_cfg_shdr *cfg_shdr = NULL;
+	uint32_t alloc_len;
+	uint32_t resid_len;
+	uint32_t pagen, pcount;
+	void *viraddr;
+	dma_addr_t phyaddr;
+
+	/* Set up SLI4 mailbox command header fields */
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG);
+
+	/* Set up SLI4 ioctl command header fields */
+	sli4_config = &mbox->u.mqe.un.sli4_config;
+
+	/* Setup for the embedded mbox command */
+	if (emb) {
+		/* Set up main header fields */
+		bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
+		sli4_config->header.cfg_mhdr.payload_length =
+					LPFC_MBX_CMD_HDR_LENGTH + length;
+		/* Set up sub-header fields following main header */
+		bf_set(lpfc_mbox_hdr_opcode,
+			&sli4_config->header.cfg_shdr.request, opcode);
+		bf_set(lpfc_mbox_hdr_subsystem,
+			&sli4_config->header.cfg_shdr.request, subsystem);
+		sli4_config->header.cfg_shdr.request.request_length = length;
+		return length;
+	}
+
+	/* Setup for the none-embedded mbox command */
+	pcount = (PAGE_ALIGN(length))/PAGE_SIZE;
+	pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
+				LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
+	/* Allocate record for keeping SGE virtual addresses */
+	mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
+				  GFP_KERNEL);
+	if (!mbox->sge_array)
+		return 0;
+
+	for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
+		/* The DMA memory is always allocated in the length of a
+		 * page even though the last SGE might not fill up to a
+		 * page, this is used as a priori size of PAGE_SIZE for
+		 * the later DMA memory free.
+		 */
+		viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE,
+					     &phyaddr, GFP_KERNEL);
+		/* In case of malloc fails, proceed with whatever we have */
+		if (!viraddr)
+			break;
+		mbox->sge_array->addr[pagen] = viraddr;
+		/* Keep the first page for later sub-header construction */
+		if (pagen == 0)
+			cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr;
+		resid_len = length - alloc_len;
+		if (resid_len > PAGE_SIZE) {
+			lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+					      PAGE_SIZE);
+			alloc_len += PAGE_SIZE;
+		} else {
+			lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+					      resid_len);
+			alloc_len = length;
+		}
+	}
+
+	/* Set up main header fields in mailbox command */
+	sli4_config->header.cfg_mhdr.payload_length = alloc_len;
+	bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen);
+
+	/* Set up sub-header fields into the first page */
+	if (pagen > 0) {
+		bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode);
+		bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem);
+		cfg_shdr->request.request_length =
+				alloc_len - sizeof(union  lpfc_sli4_cfg_shdr);
+	}
+	/* The sub-header is in DMA memory, which needs endian converstion */
+	lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+			      sizeof(union  lpfc_sli4_cfg_shdr));
+
+	return alloc_len;
+}
+
+/**
+ * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine gets the opcode from a SLI4 specific mailbox command for
+ * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
+ * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * returned.
+ **/
+uint8_t
+lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_config *sli4_cfg;
+	union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+	if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+		return 0;
+	sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+	/* For embedded mbox command, get opcode from embedded sub-header*/
+	if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+		cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+		return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+	}
+
+	/* For non-embedded mbox command, get opcode from first dma page */
+	if (unlikely(!mbox->sge_array))
+		return 0;
+	cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+	return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
+ * @mboxq: pointer to lpfc mbox command.
+ *
+ * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES
+ * mailbox command.
+ **/
+void
+lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
+{
+	/* Set up SLI4 mailbox command header fields */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS);
+
+	/* Set up host requested features. */
+	bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	/* Virtual fabrics and FIPs are not supported yet. */
+	bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+
+	/* Enable DIF (block guard) only if configured to do so. */
+	if (phba->cfg_enable_bg)
+		bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	/* Enable NPIV only if configured to do so. */
+	if (phba->max_vpi && phba->cfg_enable_npiv)
+		bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	return;
+}
+
+/**
+ * lpfc_init_vfi - Initialize the INIT_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: Vport associated with the VF.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI
+ * in the context of an FCF. The driver issues this command to setup a VFI
+ * before issuing a FLOGI to login to the VSAN. The driver should also issue a
+ * REG_VFI after a successful VSAN login.
+ **/
+void
+lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
+{
+	struct lpfc_mbx_init_vfi *init_vfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	init_vfi = &mbox->u.mqe.un.init_vfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
+	bf_set(lpfc_init_vfi_vr, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
+}
+
+/**
+ * lpfc_reg_vfi - Initialize the REG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: vport associated with the VF.
+ * @phys: BDE DMA bus address used to send the service parameters to the HBA.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport, and uses @buf as a DMAable buffer to send the vport's
+ * fc service parameters to the HBA for this VFI. REG_VFI configures virtual
+ * fabrics identified by VFI in the context of an FCF.
+ **/
+void
+lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
+{
+	struct lpfc_mbx_reg_vfi *reg_vfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	reg_vfi = &mbox->u.mqe.un.reg_vfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI);
+	bf_set(lpfc_reg_vfi_vp, reg_vfi, 1);
+	bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
+	bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+	reg_vfi->bde.addrHigh = putPaddrHigh(phys);
+	reg_vfi->bde.addrLow = putPaddrLow(phys);
+	reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
+	reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+	bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID);
+}
+
+/**
+ * lpfc_init_vpi - Initialize the INIT_VPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vpi: VPI to be initialized.
+ *
+ * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the
+ * command to activate a virtual N_Port. The HBA assigns a MAC address to use
+ * with the virtual N Port.  The SLI Host issues this command before issuing a
+ * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a
+ * successful virtual NPort login.
+ **/
+void
+lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI);
+	bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi);
+}
+
+/**
+ * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vfi: VFI to be unregistered.
+ *
+ * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
+ * (logical NPort) into the inactive state. The SLI Host must have logged out
+ * and unregistered all remote N_Ports to abort any activity on the virtual
+ * fabric. The SLI Port posts the mailbox response after marking the virtual
+ * fabric inactive.
+ **/
+void
+lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
+	bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
+}
+
+/**
+ * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters.
+ * @phba: pointer to the hba structure containing.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * This function create a SLI4 dump mailbox command to dump FCoE
+ * parameters stored in region 23.
+ **/
+int
+lpfc_dump_fcoe_param(struct lpfc_hba *phba,
+		struct lpfcMboxq *mbox)
+{
+	struct lpfc_dmabuf *mp = NULL;
+	MAILBOX_t *mb;
+
+	memset(mbox, 0, sizeof(*mbox));
+	mb = &mbox->u.mb;
+
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (mp)
+		mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+
+	if (!mp || !mp->virt) {
+		kfree(mp);
+		/* dump_fcoe_param failed to allocate memory */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+			"2569 lpfc_dump_fcoe_param: memory"
+			" allocation failed \n");
+		return 1;
+	}
+
+	memset(mp->virt, 0, LPFC_BPL_SIZE);
+	INIT_LIST_HEAD(&mp->list);
+
+	/* save address for completion */
+	mbox->context1 = (uint8_t *) mp;
+
+	mb->mbxCommand = MBX_DUMP_MEMORY;
+	mb->un.varDmp.type = DMP_NV_PARAMS;
+	mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
+	mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+	mb->un.varWords[3] = putPaddrLow(mp->phys);
+	mb->un.varWords[4] = putPaddrHigh(mp->phys);
+	return 0;
+}
+
+/**
+ * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
+ * @phba: pointer to the hba structure containing the FCF index and RQ ID.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The
+ * SLI Host uses the command to activate an FCF after it has acquired FCF
+ * information via a READ_FCF mailbox command. This mailbox command also is used
+ * to indicate where received unsolicited frames from this FCF will be sent. By
+ * default this routine will set up the FCF to forward all unsolicited frames
+ * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * more complicated setups.
+ **/
+void
+lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_reg_fcfi *reg_fcfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	reg_fcfi = &mbox->u.mqe.un.reg_fcfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI);
+	bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id);
+	bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+	/* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
+	bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
+		(~phba->fcf.addr_mode) & 0x3);
+	if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+		bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
+		bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+	}
+}
+
+/**
+ * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @fcfi: FCFI to be unregistered.
+ *
+ * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs).
+ * The SLI Host uses the command to inactivate an FCFI.
+ **/
+void
+lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI);
+	bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi);
+}
+
+/**
+ * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @ndlp: The nodelist structure that describes the RPI to resume.
+ *
+ * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a
+ * link event.
+ **/
+void
+lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
+{
+	struct lpfc_mbx_resume_rpi *resume_rpi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	resume_rpi = &mbox->u.mqe.un.resume_rpi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
+	bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi);
+	bf_set(lpfc_resume_rpi_vpi, resume_rpi,
+	       ndlp->vport->vpi + ndlp->vport->phba->vpi_base);
+	bf_set(lpfc_resume_rpi_vfi, resume_rpi,
+	       ndlp->vport->vfi + ndlp->vport->phba->vfi_base);
+}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a97673339..e198c917c13 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
  * @phba: HBA to allocate pools for
  *
  * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool.  Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool.  Creates and allocates kmalloc-backed mempools
  * for LPFC_MBOXQ_t and lpfc_nodelist.  Also allocates the VPI bitmask.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.  If any
@@ -56,19 +58,30 @@
  *   -ENOMEM on failure (if any memory allocations fail)
  **/
 int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
 {
 	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 	int longs;
 	int i;
 
-	phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
-				phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev,
+				phba->cfg_sg_dma_buf_size,
+				phba->cfg_sg_dma_buf_size,
+				0);
+	else
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev, phba->cfg_sg_dma_buf_size,
+				align, 0);
 	if (!phba->lpfc_scsi_dma_buf_pool)
 		goto fail;
 
 	phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
-							LPFC_BPL_SIZE, 8,0);
+							LPFC_BPL_SIZE,
+							align, 0);
 	if (!phba->lpfc_mbuf_pool)
 		goto fail_free_dma_buf_pool;
 
@@ -97,23 +110,31 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 						sizeof(struct lpfc_nodelist));
 	if (!phba->nlp_mem_pool)
 		goto fail_free_mbox_pool;
-
-	phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
-					      LPFC_BPL_SIZE, 8, 0);
-	if (!phba->lpfc_hbq_pool)
+	phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+					      phba->pcidev,
+					      LPFC_HDR_BUF_SIZE, align, 0);
+	if (!phba->lpfc_hrb_pool)
 		goto fail_free_nlp_mem_pool;
+	phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+					      phba->pcidev,
+					      LPFC_DATA_BUF_SIZE, align, 0);
+	if (!phba->lpfc_drb_pool)
+		goto fail_free_hbq_pool;
 
 	/* vpi zero is reserved for the physical port so add 1 to max */
 	longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
 	phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
 	if (!phba->vpi_bmask)
-		goto fail_free_hbq_pool;
+		goto fail_free_dbq_pool;
 
 	return 0;
 
+ fail_free_dbq_pool:
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
  fail_free_hbq_pool:
-	lpfc_sli_hbqbuf_free_all(phba);
-	pci_pool_destroy(phba->lpfc_hbq_pool);
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
  fail_free_nlp_mem_pool:
 	mempool_destroy(phba->nlp_mem_pool);
 	phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
  * @phba: HBA to free memory for
  *
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool.  Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist.  Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
  *
  * Returns: None
  **/
 void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
-	LPFC_MBOXQ_t *mbox, *next_mbox;
-	struct lpfc_dmabuf   *mp;
 	int i;
+	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 
+	/* Free VPI bitmask memory */
 	kfree(phba->vpi_bmask);
+
+	/* Free HBQ pools */
 	lpfc_sli_hbqbuf_free_all(phba);
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
+
+	/* Free NLP memory pool */
+	mempool_destroy(phba->nlp_mem_pool);
+	phba->nlp_mem_pool = NULL;
+
+	/* Free mbox memory pool */
+	mempool_destroy(phba->mbox_mem_pool);
+	phba->mbox_mem_pool = NULL;
+
+	/* Free MBUF memory pool */
+	for (i = 0; i < pool->current_count; i++)
+		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+			      pool->elements[i].phys);
+	kfree(pool->elements);
+
+	pci_pool_destroy(phba->lpfc_mbuf_pool);
+	phba->lpfc_mbuf_pool = NULL;
 
+	/* Free DMA buffer memory pool */
+	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+	phba->lpfc_scsi_dma_buf_pool = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mbox, *next_mbox;
+	struct lpfc_dmabuf   *mp;
+
+	/* Free memory used in mailbox queue back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -166,6 +233,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
+	/* Free memory used in mailbox cmpl list back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -175,8 +243,10 @@ lpfc_mem_free(struct lpfc_hba * phba)
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
-
+	/* Free the active mailbox command back to the mailbox memory pool */
+	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 	if (psli->mbox_active) {
 		mbox = psli->mbox_active;
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@ lpfc_mem_free(struct lpfc_hba * phba)
 		psli->mbox_active = NULL;
 	}
 
-	for (i = 0; i < pool->current_count; i++)
-		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
-						 pool->elements[i].phys);
-	kfree(pool->elements);
-
-	pci_pool_destroy(phba->lpfc_hbq_pool);
-	mempool_destroy(phba->nlp_mem_pool);
-	mempool_destroy(phba->mbox_mem_pool);
-
-	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
-	pci_pool_destroy(phba->lpfc_mbuf_pool);
-
-	phba->lpfc_hbq_pool = NULL;
-	phba->nlp_mem_pool = NULL;
-	phba->mbox_mem_pool = NULL;
-	phba->lpfc_scsi_dma_buf_pool = NULL;
-	phba->lpfc_mbuf_pool = NULL;
+	/* Free and destroy all the allocated memory pools */
+	lpfc_mem_free(phba);
 
 	/* Free the iocb lookup array */
 	kfree(psli->iocbq_lookup);
 	psli->iocbq_lookup = NULL;
+
+	return;
 }
 
 /**
@@ -305,7 +362,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
  * lpfc_els_hbq_alloc - Allocate an HBQ buffer
  * @phba: HBA to allocate HBQ buffer for
  *
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
  * pool along a non-DMA-mapped container for it.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.
@@ -323,7 +380,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 	if (!hbqbp)
 		return NULL;
 
-	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
 					  &hbqbp->dbuf.phys);
 	if (!hbqbp->dbuf.virt) {
 		kfree(hbqbp);
@@ -334,7 +391,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
  * @phba: HBA buffer was allocated for
  * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
  *
@@ -348,12 +405,73 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 void
 lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
 {
-	pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+	pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
 	kfree(hbqbp);
 	return;
 }
 
 /**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe.  Must be called with no locks held.
+ *
+ * Returns:
+ *   pointer to HBQ on success
+ *   NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+	struct hbq_dmabuf *dma_buf;
+
+	dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+	if (!dma_buf)
+		return NULL;
+
+	dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+					    &dma_buf->hbuf.phys);
+	if (!dma_buf->hbuf.virt) {
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+					    &dma_buf->dbuf.phys);
+	if (!dma_buf->dbuf.virt) {
+		pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+			      dma_buf->hbuf.phys);
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->size = LPFC_BPL_SIZE;
+	return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+	pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+	pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+	kfree(dmab);
+	return;
+}
+
+/**
  * lpfc_in_buf_free - Free a DMA buffer
  * @phba: HBA buffer is associated with
  * @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77af41..09f659f77bb 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
  /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -361,7 +363,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!mbox)
 		goto out;
 
-	rc = lpfc_reg_login(phba, vport->vpi, icmd->un.rcvels.remoteID,
+	rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
 			    (uint8_t *) sp, mbox, 0);
 	if (rc) {
 		mempool_free(mbox, phba->mbox_mem_pool);
@@ -495,11 +497,19 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
 	else
 		lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+	if ((ndlp->nlp_type & NLP_FABRIC) &&
+		vport->port_type == LPFC_NPIV_PORT) {
+		lpfc_linkdown_port(vport);
+		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
+		spin_lock_irq(shost->host_lock);
+		ndlp->nlp_flag |= NLP_DELAY_TMO;
+		spin_unlock_irq(shost->host_lock);
 
-	if ((!(ndlp->nlp_type & NLP_FABRIC) &&
-	     ((ndlp->nlp_type & NLP_FCP_TARGET) ||
-	      !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
-	    (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
+		ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
+	} else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
+		((ndlp->nlp_type & NLP_FCP_TARGET) ||
+		!(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
+		(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
 		/* Only try to re-login if this is NOT a Fabric Node */
 		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
 		spin_lock_irq(shost->host_lock);
@@ -567,7 +577,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
-	if (!ndlp->nlp_rpi) {
+	if (!(ndlp->nlp_flag & NLP_RPI_VALID)) {
 		ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 		return 0;
 	}
@@ -857,7 +867,7 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport,
 
 	lpfc_unreg_rpi(vport, ndlp);
 
-	if (lpfc_reg_login(phba, vport->vpi, irsp->un.elsreq64.remoteID,
+	if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
 			   (uint8_t *) sp, mbox, 0) == 0) {
 		switch (ndlp->nlp_DID) {
 		case NameServer_DID:
@@ -1068,6 +1078,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
 	IOCB_t *irsp;
 	ADISC *ap;
+	int rc;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
@@ -1093,6 +1104,15 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 		return ndlp->nlp_state;
 	}
 
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_resume_rpi(ndlp);
+		if (rc) {
+			/* Stay in state and retry. */
+			ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
+			return ndlp->nlp_state;
+		}
+	}
+
 	if (ndlp->nlp_type & NLP_FCP_TARGET) {
 		ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
@@ -1100,6 +1120,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 		ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 	}
+
 	return ndlp->nlp_state;
 }
 
@@ -1190,7 +1211,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 
 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
 	if ((mb = phba->sli.mbox_active)) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			lpfc_nlp_put(ndlp);
 			mb->context2 = NULL;
@@ -1200,7 +1221,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
@@ -1251,7 +1272,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t did  = mb->un.varWords[1];
 
 	if (mb->mbxStatus) {
@@ -1283,6 +1304,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 
 	/* Only if we are not a fabric nport do we issue PRLI */
 	if (!(ndlp->nlp_type & NLP_FABRIC)) {
@@ -1878,11 +1900,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport,
 			    void *arg, uint32_t evt)
 {
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t    *mb = &pmb->mb;
+	MAILBOX_t    *mb = &pmb->u.mb;
 
-	if (!mb->mbxStatus)
+	if (!mb->mbxStatus) {
 		ndlp->nlp_rpi = mb->un.varWords[0];
-	else {
+		ndlp->nlp_flag |= NLP_RPI_VALID;
+	} else {
 		if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
 			lpfc_drop_node(vport, ndlp);
 			return NLP_STE_FREED_NODE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 8032c5adb6a..7991ba1980a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -31,8 +31,10 @@
 #include <scsi/scsi_transport_fc.h>
 
 #include "lpfc_version.h"
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -57,6 +59,8 @@ static char *dif_op_str[] = {
 	"SCSI_PROT_READ_CONVERT",
 	"SCSI_PROT_WRITE_CONVERT"
 };
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
 
 static void
 lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -325,7 +329,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				new_queue_depth =
@@ -379,7 +383,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				if (vports[i]->cfg_lun_queue_depth <=
@@ -427,7 +431,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				rport = starget_to_rport(scsi_target(sdev));
@@ -438,22 +442,23 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
  * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
  *
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O.  The non-DMAable buffer region
- * contains information to build the IOCB.  The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL.  In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
  *
  * Return codes:
- *   NULL - Error
- *   Pointer to lpfc_scsi_buf data structure - Success
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
  **/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 {
 	struct lpfc_hba *phba = vport->phba;
 	struct lpfc_scsi_buf *psb;
@@ -463,107 +468,401 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
 	dma_addr_t pdma_phys_fcp_rsp;
 	dma_addr_t pdma_phys_bpl;
 	uint16_t iotag;
+	int bcnt;
 
-	psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
-	if (!psb)
-		return NULL;
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
+
+		/*
+		 * Get memory from the pci pool to map the virt space to pci
+		 * bus space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+					GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
+
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+					psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+		psb->fcp_cmnd = psb->data;
+		psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+		psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
+			sizeof(struct fcp_rsp);
+
+		/* Initialize local short-hand pointers. */
+		bpl = psb->fcp_bpl;
+		pdma_phys_fcp_cmd = psb->dma_handle;
+		pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+		pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+			sizeof(struct fcp_rsp);
+
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+		bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+		bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+		bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+
+		/* Setup the physical region for the FCP RSP */
+		bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+		bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+		bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+		bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		if ((phba->sli_rev == 3) &&
+				!(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+			/* fill in immediate fcp command BDE */
+			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+			iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+			iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+					unsli3.fcp_ext.icd);
+			iocb->un.fcpi64.bdl.addrHigh = 0;
+			iocb->ulpBdeCount = 0;
+			iocb->ulpLe = 0;
+			/* fill in responce BDE */
+			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+							BUFF_TYPE_BDE_64;
+			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+				sizeof(struct fcp_rsp);
+			iocb->unsli3.fcp_ext.rbde.addrLow =
+				putPaddrLow(pdma_phys_fcp_rsp);
+			iocb->unsli3.fcp_ext.rbde.addrHigh =
+				putPaddrHigh(pdma_phys_fcp_rsp);
+		} else {
+			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+			iocb->un.fcpi64.bdl.bdeSize =
+					(2 * sizeof(struct ulp_bde64));
+			iocb->un.fcpi64.bdl.addrLow =
+					putPaddrLow(pdma_phys_bpl);
+			iocb->un.fcpi64.bdl.addrHigh =
+					putPaddrHigh(pdma_phys_bpl);
+			iocb->ulpBdeCount = 1;
+			iocb->ulpLe = 1;
+		}
+		iocb->ulpClass = CLASS3;
+		psb->status = IOSTAT_SUCCESS;
+		/* Put it back into the SCSI buffer list */
+		lpfc_release_scsi_buf_s4(phba, psb);
 
-	/*
-	 * Get memory from the pci pool to map the virt space to pci bus space
-	 * for an I/O.  The DMA buffer includes space for the struct fcp_cmnd,
-	 * struct fcp_rsp and the number of bde's necessary to support the
-	 * sg_tablesize.
-	 */
-	psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
-							&psb->dma_handle);
-	if (!psb->data) {
-		kfree(psb);
-		return NULL;
 	}
 
-	/* Initialize virtual ptrs to dma_buf region. */
-	memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+	return bcnt;
+}
 
-	/* Allocate iotag for psb->cur_iocbq. */
-	iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
-	if (iotag == 0) {
-		pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
-			      psb->data, psb->dma_handle);
-		kfree (psb);
-		return NULL;
+/**
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_scsi_buf *psb, *next_psb;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+	list_for_each_entry_safe(psb, next_psb,
+		&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+		if (psb->cur_iocbq.sli4_xritag == xri) {
+			list_del(&psb->list);
+			psb->status = IOSTAT_SUCCESS;
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+			lpfc_release_scsi_buf_s4(phba, psb);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb;
+	int index, status, bcnt = 0, rcnt = 0, rc = 0;
+	LIST_HEAD(sblist);
+
+	for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+		psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+		if (psb) {
+			/* Remove from SCSI buffer list */
+			list_del(&psb->list);
+			/* Add it to a local SCSI buffer list */
+			list_add_tail(&psb->list, &sblist);
+			if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				bcnt = rcnt;
+				rcnt = 0;
+			}
+		} else
+			/* A hole present in the XRI array, need to skip */
+			bcnt = rcnt;
+
+		if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+			/* End of XRI array for SCSI buffer, complete */
+			bcnt = rcnt;
+
+		/* Continue until collect up to a nembed page worth of sgls */
+		if (bcnt == 0)
+			continue;
+		/* Now, post the SCSI buffer list sgls as a block */
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		bcnt = 0;
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+					 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
 	}
-	psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+	return rc;
+}
 
-	psb->fcp_cmnd = psb->data;
-	psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
-	psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
-							sizeof(struct fcp_rsp);
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_scsi_buf *psb;
+	struct sli4_sge *sgl;
+	IOCB_t *iocb;
+	dma_addr_t pdma_phys_fcp_cmd;
+	dma_addr_t pdma_phys_fcp_rsp;
+	dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+	uint16_t iotag, last_xritag = NO_XRI;
+	int status = 0, index;
+	int bcnt;
+	int non_sequential_xri = 0;
+	int rc = 0;
+	LIST_HEAD(sblist);
+
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
 
-	/* Initialize local short-hand pointers. */
-	bpl = psb->fcp_bpl;
-	pdma_phys_fcp_cmd = psb->dma_handle;
-	pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
-	pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
-			sizeof(struct fcp_rsp);
+		/*
+		 * Get memory from the pci pool to map the virt space to pci bus
+		 * space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+						GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
 
-	/*
-	 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance are sg
-	 * list bdes.  Initialize the first two and leave the rest for
-	 * queuecommand.
-	 */
-	bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
-	bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
-	bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
-	bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-	bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
-
-	/* Setup the physical region for the FCP RSP */
-	bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
-	bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
-	bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
-	bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-	bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
 
-	/*
-	 * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
-	 * initialize it with all known data now.
-	 */
-	iocb = &psb->cur_iocbq.iocb;
-	iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
-	if ((phba->sli_rev == 3) &&
-	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
-		/* fill in immediate fcp command BDE */
-		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			kfree(psb);
+			break;
+		}
+
+		psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+			      psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		if (last_xritag != NO_XRI
+			&& psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+			non_sequential_xri = 1;
+		} else
+			list_add_tail(&psb->list, &sblist);
+		last_xritag = psb->cur_iocbq.sli4_xritag;
+
+		index = phba->sli4_hba.scsi_xri_cnt++;
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+		psb->fcp_bpl = psb->data;
+		psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+			- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+					sizeof(struct fcp_cmnd));
+
+		/* Initialize local short-hand pointers. */
+		sgl = (struct sli4_sge *)psb->fcp_bpl;
+		pdma_phys_bpl = psb->dma_handle;
+		pdma_phys_fcp_cmd =
+			(psb->dma_handle + phba->cfg_sg_dma_buf_size)
+			 - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+		sgl++;
+
+		/* Setup the physical region for the FCP RSP */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+		/* setting the BLP size to 2 * sizeof BDE may not be correct.
+		 * We are setting the bpl to point to out sgl. An sgl's
+		 * entries are 16 bytes, a bpl entries are 12 bytes.
+		 */
 		iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
-		iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
-						       unsli3.fcp_ext.icd);
-		iocb->un.fcpi64.bdl.addrHigh = 0;
-		iocb->ulpBdeCount = 0;
-		iocb->ulpLe = 0;
-		/* fill in responce BDE */
-		iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-		iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
-						sizeof(struct fcp_rsp);
-		iocb->unsli3.fcp_ext.rbde.addrLow =
-						putPaddrLow(pdma_phys_fcp_rsp);
-		iocb->unsli3.fcp_ext.rbde.addrHigh =
-						putPaddrHigh(pdma_phys_fcp_rsp);
-	} else {
-		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
-		iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
-		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
-		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
+		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
 		iocb->ulpBdeCount = 1;
 		iocb->ulpLe = 1;
+		iocb->ulpClass = CLASS3;
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		psb->dma_phys_bpl = pdma_phys_bpl;
+		phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+		if (non_sequential_xri) {
+			status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+						pdma_phys_bpl1,
+						psb->cur_iocbq.sli4_xritag);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+			break;
+		}
+	}
+	if (bcnt) {
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+				 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
 	}
-	iocb->ulpClass = CLASS3;
 
-	return psb;
+	return bcnt + non_sequential_xri - rc;
 }
 
 /**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+	return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -591,7 +890,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is being released.
  *
@@ -599,7 +898,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
  * lpfc_scsi_buf_list list.
  **/
 static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	unsigned long iflag = 0;
 
@@ -610,21 +909,69 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 }
 
 /**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	unsigned long iflag = 0;
+
+	if (psb->status == IOSTAT_LOCAL_REJECT
+		&& psb->result == IOERR_ABORT_REQUESTED) {
+		spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list,
+			&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+	} else {
+
+		spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	}
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+	phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
  *
  * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
  *
  * Return codes:
  *   1 - Error
  *   0 - Success
  **/
 static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 {
 	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
 	struct scatterlist *sgel = NULL;
@@ -827,8 +1174,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
  * @reftag:         out: ref tag (reference tag)
  *
  * Description:
- *   Extract DIF paramters from the command if possible.  Otherwise,
- *   use default paratmers.
+ *   Extract DIF parameters from the command if possible.  Otherwise,
+ *   use default parameters.
  *
  **/
 static inline void
@@ -1412,6 +1759,133 @@ out:
 }
 
 /**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+	struct scatterlist *sgel = NULL;
+	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+	dma_addr_t physaddr;
+	uint32_t num_bde = 0;
+	uint32_t dma_len;
+	uint32_t dma_offset = 0;
+	int nseg;
+
+	/*
+	 * There are three possibilities here - use scatter-gather segment, use
+	 * the single mapping, or neither.  Start the lpfc command prep by
+	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+	 * data bde entry.
+	 */
+	if (scsi_sg_count(scsi_cmnd)) {
+		/*
+		 * The driver stores the segment count returned from pci_map_sg
+		 * because this a count of dma-mappings used to map the use_sg
+		 * pages.  They are not guaranteed to be the same for those
+		 * architectures that implement an IOMMU.
+		 */
+
+		nseg = scsi_dma_map(scsi_cmnd);
+		if (unlikely(!nseg))
+			return 1;
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl += 1;
+
+		lpfc_cmd->seg_cnt = nseg;
+		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+			printk(KERN_ERR "%s: Too many sg segments from "
+			       "dma_map_sg.  Config %d, seg_cnt %d\n",
+			       __func__, phba->cfg_sg_seg_cnt,
+			       lpfc_cmd->seg_cnt);
+			scsi_dma_unmap(scsi_cmnd);
+			return 1;
+		}
+
+		/*
+		 * The driver established a maximum scatter-gather segment count
+		 * during probe that limits the number of sg elements in any
+		 * single scsi command.  Just run through the seg_cnt and format
+		 * the sge's.
+		 * When using SLI-3 the driver will try to fit all the BDEs into
+		 * the IOCB. If it can't then the BDEs get added to a BPL as it
+		 * does for SLI-2 mode.
+		 */
+		scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+			physaddr = sg_dma_address(sgel);
+			dma_len = sg_dma_len(sgel);
+			bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+			if ((num_bde + 1) == nseg)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			dma_offset += dma_len;
+			sgl++;
+		}
+	} else {
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+	}
+
+	/*
+	 * Finish initializing those IOCB fields that are dependent on the
+	 * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
+	 * explicitly reinitialized.
+	 * all iocb memory resources are reused.
+	 */
+	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+	/*
+	 * Due to difference in data length between DIF/non-DIF paths,
+	 * we need to set word 4 of IOCB here
+	 */
+	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+	return 0;
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
  * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
  * @phba: Pointer to hba context object.
  * @vport: Pointer to vport object.
@@ -1504,15 +1978,15 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
  *
  * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
  **/
 static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	/*
 	 * There are only two special cases to consider.  (1) the scsi command
@@ -1529,6 +2003,36 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
 }
 
 /**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
+/**
  * lpfc_handler_fcp_err - FCP response handler
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +2180,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
  * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
  * @phba: The Hba for which this call is being executed.
  * @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
  *
  * This routine assigns scsi command result by looking into response IOCB
  * status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2461,16 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
 }
 
 /**
- * lpfc_scsi_prep_cmnd -  Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
  * @pnode: Pointer to lpfc_nodelist.
  *
  * This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
  **/
 static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		    struct lpfc_nodelist *pnode)
 {
 	struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2517,11 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 	if (scsi_sg_count(scsi_cmnd)) {
 		if (datadir == DMA_TO_DEVICE) {
 			iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
-			iocb_cmd->un.fcpi.fcpi_parm = 0;
-			iocb_cmd->ulpPU = 0;
+			if (phba->sli_rev < LPFC_SLI_REV4) {
+				iocb_cmd->un.fcpi.fcpi_parm = 0;
+				iocb_cmd->ulpPU = 0;
+			} else
+				iocb_cmd->ulpPU = PARM_READ_CHECK;
 			fcp_cmnd->fcpCntl3 = WRITE_DATA;
 			phba->fc4OutputRequests++;
 		} else {
@@ -2051,20 +2558,60 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 }
 
 /**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		       struct lpfc_nodelist *pnode)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		    struct lpfc_nodelist *pnode)
+{
+	vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @lun: Logical unit number.
  * @task_mgmt_cmd: SCSI task management command.
  *
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
  *
  * Return codes:
  *   0 - Error
  *   1 - Success
  **/
 static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
 			     struct lpfc_scsi_buf *lpfc_cmd,
 			     unsigned int lun,
 			     uint8_t task_mgmt_cmd)
@@ -2114,6 +2661,107 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 }
 
 /**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+				struct lpfc_scsi_buf *lpfc_cmd,
+				unsigned int lun,
+				uint8_t task_mgmt_cmd)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+						task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+			     struct lpfc_scsi_buf *lpfc_cmd,
+			     unsigned int lun,
+			     uint8_t task_mgmt_cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+
+	return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+						  task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s3;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s4;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1418 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+	phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+	return 0;
+}
+
+/**
  * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
  * @phba: The Hba for which this call is being executed.
  * @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2178,9 +2826,8 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 			 "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
 			 tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba,
-				       &phba->sli.ring[phba->sli.fcp_ring],
-				       iocbq, iocbqrsp, lpfc_cmd->timeout);
+	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if (status != IOCB_SUCCESS) {
 		if (status == IOCB_TIMEDOUT) {
 			iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2305,7 +2952,6 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli   *psli = &phba->sli;
 	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
 	struct lpfc_nodelist *ndlp = rdata->pnode;
 	struct lpfc_scsi_buf *lpfc_cmd;
@@ -2427,7 +3073,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
 
 	atomic_inc(&ndlp->cmd_pending);
-	err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+	err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
 				  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
 	if (err) {
 		atomic_dec(&ndlp->cmd_pending);
@@ -2490,7 +3136,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
 	struct lpfc_iocbq *iocb;
 	struct lpfc_iocbq *abtsiocb;
 	struct lpfc_scsi_buf *lpfc_cmd;
@@ -2531,7 +3176,10 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	icmd = &abtsiocb->iocb;
 	icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
 	icmd->un.acxri.abortContextTag = cmd->ulpContext;
-	icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+	else
+		icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
 
 	icmd->ulpLe = 1;
 	icmd->ulpClass = cmd->ulpClass;
@@ -2542,7 +3190,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 
 	abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
 	abtsiocb->vport = vport;
-	if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+	    IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, abtsiocb);
 		ret = FAILED;
 		goto out;
@@ -2668,8 +3317,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 			 "0703 Issue target reset to TGT %d LUN %d "
 			 "rpi x%x nlp_flag x%x\n", cmnd->device->id,
 			 cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba,
-					  &phba->sli.ring[phba->sli.fcp_ring],
+	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
 					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if (status == IOCB_TIMEDOUT) {
 		iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2825,11 +3473,10 @@ lpfc_slave_alloc(struct scsi_device *sdev)
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_scsi_buf *scsi_buf = NULL;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
-	uint32_t total = 0, i;
+	uint32_t total = 0;
 	uint32_t num_to_alloc = 0;
-	unsigned long flags;
+	int num_allocated = 0;
 
 	if (!rport || fc_remote_port_chkready(rport))
 		return -ENXIO;
@@ -2863,20 +3510,13 @@ lpfc_slave_alloc(struct scsi_device *sdev)
 				 (phba->cfg_hba_queue_depth - total));
 		num_to_alloc = phba->cfg_hba_queue_depth - total;
 	}
-
-	for (i = 0; i < num_to_alloc; i++) {
-		scsi_buf = lpfc_new_scsi_buf(vport);
-		if (!scsi_buf) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-					 "0706 Failed to allocate "
-					 "command buffer\n");
-			break;
-		}
-
-		spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
-		phba->total_scsi_bufs++;
-		list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
-		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+	num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+	if (num_to_alloc != num_allocated) {
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+				 "0708 Allocation request of %d "
+				 "command buffers did not succeed.  "
+				 "Allocated %d buffers.\n",
+				 num_to_alloc, num_allocated);
 	}
 	return 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d5fa2..65dfc8bd5b4 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@ struct lpfc_scsi_buf {
 	struct fcp_rsp *fcp_rsp;
 	struct ulp_bde64 *fcp_bpl;
 
+	dma_addr_t dma_phys_bpl;
+
 	/* cur_iocbq has phys of the dma-able buffer.
 	 * Iotag is in here
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index eb5c75c45ba..ff04daf18f4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -29,9 +29,12 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -40,24 +43,7 @@
 #include "lpfc_logmsg.h"
 #include "lpfc_compat.h"
 #include "lpfc_debugfs.h"
-
-/*
- * Define macro to log: Mailbox command x%x cannot issue Data
- * This allows multiple uses of lpfc_msgBlk0311
- * w/o perturbing log msg utility.
- */
-#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
-			lpfc_printf_log(phba, \
-				KERN_INFO, \
-				LOG_MBOX | LOG_SLI, \
-				"(%d):0311 Mailbox command x%x cannot " \
-				"issue Data: x%x x%x x%x\n", \
-				pmbox->vport ? pmbox->vport->vpi : 0, \
-				pmbox->mb.mbxCommand,		\
-				phba->pport->port_state,	\
-				psli->sli_flag,	\
-				flag)
-
+#include "lpfc_vport.h"
 
 /* There are only four IOCB completion types. */
 typedef enum _lpfc_iocb_type {
@@ -67,6 +53,350 @@ typedef enum _lpfc_iocb_type {
 	LPFC_ABORT_IOCB
 } lpfc_iocb_type;
 
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+				  uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+			    uint8_t *, uint32_t *);
+
+static IOCB_t *
+lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
+{
+	return &iocbq->iocb;
+}
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+{
+	union lpfc_wqe *temp_wqe = q->qe[q->host_index].wqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	/* set consumption flag every once in a while */
+	if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
+		bf_set(lpfc_wqe_gen_wqec, &wqe->generic, 1);
+
+	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_wq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_wq_doorbell_index, &doorbell, host_index);
+	bf_set(lpfc_wq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.WQDBregaddr);
+	readl(q->phba->sli4_hba.WQDBregaddr); /* Flush */
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+	uint32_t released = 0;
+
+	if (q->hba_index == index)
+		return 0;
+	do {
+		q->hba_index = ((q->hba_index + 1) % q->entry_count);
+		released++;
+	} while (q->hba_index != index);
+	return released;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @wqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+	struct lpfc_mqe *temp_mqe = q->qe[q->host_index].mqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	lpfc_sli_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+	/* Save off the mailbox pointer for completion */
+	q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+	readl(q->phba->sli4_hba.MQDBregaddr); /* Flush */
+	return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+	/* Clear the mailbox pointer for completion */
+	q->phba->mbox = NULL;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+	struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe;
+
+	/* If the next EQE is not valid then we are done */
+	if (!bf_get(lpfc_eqe_valid, eqe))
+		return NULL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+		return NULL;
+
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
+{
+	uint32_t released = 0;
+	struct lpfc_eqe *temp_eqe;
+	struct lpfc_register doorbell;
+
+	/* while there are valid entries */
+	while (q->hba_index != q->host_index) {
+		temp_eqe = q->qe[q->host_index].eqe;
+		bf_set(lpfc_eqe_valid, temp_eqe, 0);
+		released++;
+		q->host_index = ((q->host_index + 1) % q->entry_count);
+	}
+	if (unlikely(released == 0 && !arm))
+		return 0;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm) {
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+		bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+	}
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+	bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+	return released;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+	struct lpfc_cqe *cqe;
+
+	/* If the next CQE is not valid then we are done */
+	if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+		return NULL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+		return NULL;
+
+	cqe = q->qe[q->hba_index].cqe;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return cqe;
+}
+
+/**
+ * lpfc_sli4_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
+{
+	uint32_t released = 0;
+	struct lpfc_cqe *temp_qe;
+	struct lpfc_register doorbell;
+
+	/* while there are valid entries */
+	while (q->hba_index != q->host_index) {
+		temp_qe = q->qe[q->host_index].cqe;
+		bf_set(lpfc_cqe_valid, temp_qe, 0);
+		released++;
+		q->host_index = ((q->host_index + 1) % q->entry_count);
+	}
+	if (unlikely(released == 0 && !arm))
+		return 0;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm)
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+	bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+	return released;
+}
+
+/**
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ * @q: The Header Receive Queue to operate on.
+ * @wqe: The Receive Queue Entry to put on the Receive queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+		 struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+	struct lpfc_rqe *temp_hrqe = hq->qe[hq->host_index].rqe;
+	struct lpfc_rqe *temp_drqe = dq->qe[dq->host_index].rqe;
+	struct lpfc_register doorbell;
+	int put_index = hq->host_index;
+
+	if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+		return -EINVAL;
+	if (hq->host_index != dq->host_index)
+		return -EINVAL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+		return -EBUSY;
+	lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+	lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+	/* Update the host index to point to the next slot */
+	hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+	dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+
+	/* Ring The Header Receive Queue Doorbell */
+	if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+		doorbell.word0 = 0;
+		bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
+		       LPFC_RQ_POST_BATCH);
+		bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
+		writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
+	}
+	return put_index;
+}
+
+/**
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ * @q: The Header Receive Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+	if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+		return 0;
+	hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+	dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+	return 1;
+}
+
 /**
  * lpfc_cmd_iocb - Get next command iocb entry in the ring
  * @phba: Pointer to HBA context object.
@@ -121,6 +451,76 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
 }
 
 /**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+	return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq =  phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+	struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+	struct lpfc_sglq *sglq = NULL;
+	uint16_t adj_xri;
+	list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+	return sglq;
+}
+
+/**
  * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
  * @phba: Pointer to HBA context object.
  *
@@ -142,7 +542,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
 }
 
 /**
- * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
  *
@@ -150,9 +550,62 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
  * iocb object to the iocb pool. The iotag in the iocb object
  * does not change for each use of the iocb object. This function
  * clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_sgl_list).
  **/
 static void
-__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	struct lpfc_sglq *sglq;
+	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+	unsigned long iflag;
+
+	if (iocbq->sli4_xritag == NO_XRI)
+		sglq = NULL;
+	else
+		sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+	if (sglq)  {
+		if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
+			|| ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+			&& (iocbq->iocb.un.ulpWord[4]
+				== IOERR_SLI_ABORTED))) {
+			spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
+					iflag);
+			list_add(&sglq->list,
+				&phba->sli4_hba.lpfc_abts_els_sgl_list);
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_sgl_list_lock, iflag);
+		} else
+			list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+	}
+
+
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
+	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 {
 	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
 
@@ -160,10 +613,27 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 	 * Clean all volatile data fields, preserve iotag and node struct.
 	 */
 	memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
 	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
 }
 
 /**
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	phba->__lpfc_sli_release_iocbq(phba, iocbq);
+}
+
+/**
  * lpfc_sli_release_iocbq - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
@@ -281,6 +751,14 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
 	case CMD_GEN_REQUEST64_CR:
 	case CMD_GEN_REQUEST64_CX:
 	case CMD_XMIT_ELS_RSP64_CX:
+	case DSSCMD_IWRITE64_CR:
+	case DSSCMD_IWRITE64_CX:
+	case DSSCMD_IREAD64_CR:
+	case DSSCMD_IREAD64_CX:
+	case DSSCMD_INVALIDATE_DEK:
+	case DSSCMD_SET_KEK:
+	case DSSCMD_GET_KEK_ID:
+	case DSSCMD_GEN_XFER:
 		type = LPFC_SOL_IOCB;
 		break;
 	case CMD_ABORT_XRI_CN:
@@ -348,7 +826,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba)
 	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb)
 		return -ENOMEM;
-	pmbox = &pmb->mb;
+	pmbox = &pmb->u.mb;
 	phba->link_state = LPFC_INIT_MBX_CMDS;
 	for (i = 0; i < psli->num_rings; i++) {
 		lpfc_config_ring(phba, i, pmb);
@@ -779,8 +1257,8 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
 		phba->hbqs[i].buffer_count = 0;
 	}
 	/* Return all HBQ buffer that are in-fly */
-	list_for_each_entry_safe(dmabuf, next_dmabuf,
-			&phba->hbqbuf_in_list, list) {
+	list_for_each_entry_safe(dmabuf, next_dmabuf, &phba->rb_pend_list,
+				 list) {
 		hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
 		list_del(&hbq_buf->dbuf.list);
 		if (hbq_buf->tag == -1) {
@@ -814,10 +1292,28 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
  * pointer to the hbq entry if it successfully post the buffer
  * else it will return NULL.
  **/
-static struct lpfc_hbq_entry *
+static int
 lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
 			 struct hbq_dmabuf *hbq_buf)
 {
+	return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
 	struct lpfc_hbq_entry *hbqe;
 	dma_addr_t physaddr = hbq_buf->dbuf.phys;
 
@@ -838,8 +1334,40 @@ lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
 				/* flush */
 		readl(phba->hbq_put + hbqno);
 		list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
-	}
-	return hbqe;
+		return 0;
+	} else
+		return -ENOMEM;
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
+	int rc;
+	struct lpfc_rqe hrqe;
+	struct lpfc_rqe drqe;
+
+	hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+	hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+	drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+	drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+	rc = lpfc_sli4_rq_put(phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			      &hrqe, &drqe);
+	if (rc < 0)
+		return rc;
+	hbq_buf->tag = rc;
+	list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+	return 0;
 }
 
 /* HBQ for ELS and CT traffic. */
@@ -914,7 +1442,7 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count)
 				 dbuf.list);
 		hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
 				      (hbqno << 16));
-		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
 			phba->hbqs[hbqno].buffer_count++;
 			posted++;
 		} else
@@ -965,6 +1493,25 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
 }
 
 /**
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+	struct lpfc_dmabuf *d_buf;
+
+	list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+	if (!d_buf)
+		return NULL;
+	return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
  * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
  * @phba: Pointer to HBA context object.
  * @tag: Tag of the hbq buffer.
@@ -985,12 +1532,15 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
 	if (hbqno >= LPFC_MAX_HBQS)
 		return NULL;
 
+	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
 		hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
 		if (hbq_buf->tag == tag) {
+			spin_unlock_irq(&phba->hbalock);
 			return hbq_buf;
 		}
 	}
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
 			"1803 Bad hbq tag. Data: x%x x%x\n",
 			tag, phba->hbqs[tag >> 16].buffer_count);
@@ -1013,9 +1563,8 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
 
 	if (hbq_buffer) {
 		hbqno = hbq_buffer->tag >> 16;
-		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
 			(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
-		}
 	}
 }
 
@@ -1086,6 +1635,15 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 	case MBX_HEARTBEAT:
 	case MBX_PORT_CAPABILITIES:
 	case MBX_PORT_IOV_CONTROL:
+	case MBX_SLI4_CONFIG:
+	case MBX_SLI4_REQ_FTRS:
+	case MBX_REG_FCFI:
+	case MBX_UNREG_FCFI:
+	case MBX_REG_VFI:
+	case MBX_UNREG_VFI:
+	case MBX_INIT_VPI:
+	case MBX_INIT_VFI:
+	case MBX_RESUME_RPI:
 		ret = mbxCommand;
 		break;
 	default:
@@ -1106,7 +1664,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
  * will wake up thread waiting on the wait queue pointed by context1
  * of the mailbox.
  **/
-static void
+void
 lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 {
 	wait_queue_head_t *pdone_q;
@@ -1140,7 +1698,7 @@ void
 lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_dmabuf *mp;
-	uint16_t rpi;
+	uint16_t rpi, vpi;
 	int rc;
 
 	mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1150,24 +1708,30 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		kfree(mp);
 	}
 
+	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+	    (phba->sli_rev == LPFC_SLI_REV4))
+		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
 	/*
 	 * If a REG_LOGIN succeeded  after node is destroyed or node
 	 * is in re-discovery driver need to cleanup the RPI.
 	 */
 	if (!(phba->pport->load_flag & FC_UNLOADING) &&
-	    pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
-	    !pmb->mb.mbxStatus) {
-
-		rpi = pmb->mb.un.varWords[0];
-		lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
+	    pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+	    !pmb->u.mb.mbxStatus) {
+		rpi = pmb->u.mb.un.varWords[0];
+		vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+		lpfc_unreg_login(phba, vpi, rpi, pmb);
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 		if (rc != MBX_NOT_FINISHED)
 			return;
 	}
 
-	mempool_free(pmb, phba->mbox_mem_pool);
-	return;
+	if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, pmb);
+	else
+		mempool_free(pmb, phba->mbox_mem_pool);
 }
 
 /**
@@ -1204,7 +1768,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 		if (pmb == NULL)
 			break;
 
-		pmbox = &pmb->mb;
+		pmbox = &pmb->u.mb;
 
 		if (pmbox->mbxCommand != MBX_HEARTBEAT) {
 			if (pmb->vport) {
@@ -1233,9 +1797,10 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 			/* Unknow mailbox command compl */
 			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 					"(%d):0323 Unknown Mailbox command "
-					"%x Cmpl\n",
+					"x%x (x%x) Cmpl\n",
 					pmb->vport ? pmb->vport->vpi : 0,
-					pmbox->mbxCommand);
+					pmbox->mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, pmb));
 			phba->link_state = LPFC_HBA_ERROR;
 			phba->work_hs = HS_FFER3;
 			lpfc_handle_eratt(phba);
@@ -1250,29 +1815,29 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 						LOG_MBOX | LOG_SLI,
 						"(%d):0305 Mbox cmd cmpl "
 						"error - RETRYing Data: x%x "
-						"x%x x%x x%x\n",
+						"(x%x) x%x x%x x%x\n",
 						pmb->vport ? pmb->vport->vpi :0,
 						pmbox->mbxCommand,
+						lpfc_sli4_mbox_opcode_get(phba,
+									  pmb),
 						pmbox->mbxStatus,
 						pmbox->un.varWords[0],
 						pmb->vport->port_state);
 				pmbox->mbxStatus = 0;
 				pmbox->mbxOwner = OWN_HOST;
-				spin_lock_irq(&phba->hbalock);
-				phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-				spin_unlock_irq(&phba->hbalock);
 				rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
-				if (rc == MBX_SUCCESS)
+				if (rc != MBX_NOT_FINISHED)
 					continue;
 			}
 		}
 
 		/* Mailbox cmd <cmd> Cmpl <cmpl> */
 		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-				"(%d):0307 Mailbox cmd x%x Cmpl x%p "
+				"(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
 				"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
 				pmb->vport ? pmb->vport->vpi : 0,
 				pmbox->mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, pmb),
 				pmb->mbox_cmpl,
 				*((uint32_t *) pmbox),
 				pmbox->un.varWords[0],
@@ -1317,6 +1882,45 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
 	return &hbq_entry->dbuf;
 }
 
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			 struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+			 uint32_t fch_type)
+{
+	int i;
+
+	/* unSolicited Responses */
+	if (pring->prt[0].profile) {
+		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+									saveq);
+		return 1;
+	}
+	/* We must search, based on rctl / type
+	   for the right routine */
+	for (i = 0; i < pring->num_mask; i++) {
+		if ((pring->prt[i].rctl == fch_r_ctl) &&
+		    (pring->prt[i].type == fch_type)) {
+			if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+				(pring->prt[i].lpfc_sli_rcv_unsol_event)
+						(phba, pring, saveq);
+			return 1;
+		}
+	}
+	return 0;
+}
 
 /**
  * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
@@ -1339,7 +1943,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	IOCB_t           * irsp;
 	WORD5            * w5p;
 	uint32_t           Rctl, Type;
-	uint32_t           match, i;
+	uint32_t           match;
 	struct lpfc_iocbq *iocbq;
 	struct lpfc_dmabuf *dmzbuf;
 
@@ -1482,35 +2086,12 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		}
 	}
 
-	/* unSolicited Responses */
-	if (pring->prt[0].profile) {
-		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
-			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
-									saveq);
-		match = 1;
-	} else {
-		/* We must search, based on rctl / type
-		   for the right routine */
-		for (i = 0; i < pring->num_mask; i++) {
-			if ((pring->prt[i].rctl == Rctl)
-			    && (pring->prt[i].type == Type)) {
-				if (pring->prt[i].lpfc_sli_rcv_unsol_event)
-					(pring->prt[i].lpfc_sli_rcv_unsol_event)
-							(phba, pring, saveq);
-				match = 1;
-				break;
-			}
-		}
-	}
-	if (match == 0) {
-		/* Unexpected Rctl / Type received */
-		/* Ring <ringno> handler: unexpected
-		   Rctl <Rctl> Type <Type> received */
+	if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0313 Ring %d handler: unexpected Rctl x%x "
 				"Type x%x received\n",
 				pring->ringno, Rctl, Type);
-	}
+
 	return 1;
 }
 
@@ -1552,6 +2133,37 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
 }
 
 /**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. This function is called with the
+ * hbalock held.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+			     struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+	struct lpfc_iocbq *cmd_iocb;
+
+	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+		cmd_iocb = phba->sli.iocbq_lookup[iotag];
+		list_del_init(&cmd_iocb->list);
+		pring->txcmplq_cnt--;
+		return cmd_iocb;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0372 iotag x%x is out off range: max iotag (x%x)\n",
+			iotag, phba->sli.last_iotag);
+	return NULL;
+}
+
+/**
  * lpfc_sli_process_sol_iocb - process solicited iocb completion
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -1954,7 +2566,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
 			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
 				(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				lpfc_rampdown_queue_depth(phba);
+				phba->lpfc_rampdown_queue_depth(phba);
 				spin_lock_irqsave(&phba->hbalock, iflag);
 			}
 
@@ -2068,39 +2680,215 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			struct lpfc_iocbq *rspiocbp)
+{
+	struct lpfc_iocbq *saveq;
+	struct lpfc_iocbq *cmdiocbp;
+	struct lpfc_iocbq *next_iocb;
+	IOCB_t *irsp = NULL;
+	uint32_t free_saveq;
+	uint8_t iocb_cmd_type;
+	lpfc_iocb_type type;
+	unsigned long iflag;
+	int rc;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* First add the response iocb to the countinueq list */
+	list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
+	pring->iocb_continueq_cnt++;
+
+	/* Now, determine whetehr the list is completed for processing */
+	irsp = &rspiocbp->iocb;
+	if (irsp->ulpLe) {
+		/*
+		 * By default, the driver expects to free all resources
+		 * associated with this iocb completion.
+		 */
+		free_saveq = 1;
+		saveq = list_get_first(&pring->iocb_continueq,
+				       struct lpfc_iocbq, list);
+		irsp = &(saveq->iocb);
+		list_del_init(&pring->iocb_continueq);
+		pring->iocb_continueq_cnt = 0;
+
+		pring->stats.iocb_rsp++;
+
+		/*
+		 * If resource errors reported from HBA, reduce
+		 * queuedepths of the SCSI device.
+		 */
+		if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+		    (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			phba->lpfc_rampdown_queue_depth(phba);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+		}
+
+		if (irsp->ulpStatus) {
+			/* Rsp ring <ringno> error: IOCB */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0328 Rsp Ring %d error: "
+					"IOCB Data: "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x\n",
+					pring->ringno,
+					irsp->un.ulpWord[0],
+					irsp->un.ulpWord[1],
+					irsp->un.ulpWord[2],
+					irsp->un.ulpWord[3],
+					irsp->un.ulpWord[4],
+					irsp->un.ulpWord[5],
+					*(((uint32_t *) irsp) + 6),
+					*(((uint32_t *) irsp) + 7),
+					*(((uint32_t *) irsp) + 8),
+					*(((uint32_t *) irsp) + 9),
+					*(((uint32_t *) irsp) + 10),
+					*(((uint32_t *) irsp) + 11),
+					*(((uint32_t *) irsp) + 12),
+					*(((uint32_t *) irsp) + 13),
+					*(((uint32_t *) irsp) + 14),
+					*(((uint32_t *) irsp) + 15));
+		}
+
+		/*
+		 * Fetch the IOCB command type and call the correct completion
+		 * routine. Solicited and Unsolicited IOCBs on the ELS ring
+		 * get freed back to the lpfc_iocb_list by the discovery
+		 * kernel thread.
+		 */
+		iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+		type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+		switch (type) {
+		case LPFC_SOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			break;
+
+		case LPFC_UNSOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			if (!rc)
+				free_saveq = 0;
+			break;
+
+		case LPFC_ABORT_IOCB:
+			cmdiocbp = NULL;
+			if (irsp->ulpCommand != CMD_XRI_ABORTED_CX)
+				cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+								 saveq);
+			if (cmdiocbp) {
+				/* Call the specified completion routine */
+				if (cmdiocbp->iocb_cmpl) {
+					spin_unlock_irqrestore(&phba->hbalock,
+							       iflag);
+					(cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
+							      saveq);
+					spin_lock_irqsave(&phba->hbalock,
+							  iflag);
+				} else
+					__lpfc_sli_release_iocbq(phba,
+								 cmdiocbp);
+			}
+			break;
+
+		case LPFC_UNKNOWN_IOCB:
+			if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+				char adaptermsg[LPFC_MAX_ADPTMSG];
+				memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+				memcpy(&adaptermsg[0], (uint8_t *)irsp,
+				       MAX_MSG_DATA);
+				dev_warn(&((phba->pcidev)->dev),
+					 "lpfc%d: %s\n",
+					 phba->brd_no, adaptermsg);
+			} else {
+				/* Unknown IOCB command */
+				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+						"0335 Unknown IOCB "
+						"command Data: x%x "
+						"x%x x%x x%x\n",
+						irsp->ulpCommand,
+						irsp->ulpStatus,
+						irsp->ulpIoTag,
+						irsp->ulpContext);
+			}
+			break;
+		}
+
+		if (free_saveq) {
+			list_for_each_entry_safe(rspiocbp, next_iocb,
+						 &saveq->list, list) {
+				list_del(&rspiocbp->list);
+				__lpfc_sli_release_iocbq(phba, rspiocbp);
+			}
+			__lpfc_sli_release_iocbq(phba, saveq);
+		}
+		rspiocbp = NULL;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @mask: Host attention register mask for this ring.
  *
- * This function is called from the worker thread when there is a ring
- * event for non-fcp rings. The caller does not hold any lock .
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the
- * response iocb indicates a completion of a command iocb. The function
- * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited
- * iocb. The function frees the resources or calls the completion handler if
- * this iocb is an abort completion. The function returns 0 when the allocated
- * iocbs are not freed, otherwise returns 1.
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
  **/
-int
+void
 lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 				struct lpfc_sli_ring *pring, uint32_t mask)
 {
+	phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
 	struct lpfc_pgp *pgp;
 	IOCB_t *entry;
 	IOCB_t *irsp = NULL;
 	struct lpfc_iocbq *rspiocbp = NULL;
-	struct lpfc_iocbq *next_iocb;
-	struct lpfc_iocbq *cmdiocbp;
-	struct lpfc_iocbq *saveq;
-	uint8_t iocb_cmd_type;
-	lpfc_iocb_type type;
-	uint32_t status, free_saveq;
 	uint32_t portRspPut, portRspMax;
-	int rc = 1;
 	unsigned long iflag;
+	uint32_t status;
 
 	pgp = &phba->port_gp[pring->ringno];
 	spin_lock_irqsave(&phba->hbalock, iflag);
@@ -2128,7 +2916,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 		phba->work_hs = HS_FFER3;
 		lpfc_handle_eratt(phba);
 
-		return 1;
+		return;
 	}
 
 	rmb();
@@ -2173,138 +2961,10 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 
 		writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
 
-		list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
-
-		pring->iocb_continueq_cnt++;
-		if (irsp->ulpLe) {
-			/*
-			 * By default, the driver expects to free all resources
-			 * associated with this iocb completion.
-			 */
-			free_saveq = 1;
-			saveq = list_get_first(&pring->iocb_continueq,
-					       struct lpfc_iocbq, list);
-			irsp = &(saveq->iocb);
-			list_del_init(&pring->iocb_continueq);
-			pring->iocb_continueq_cnt = 0;
-
-			pring->stats.iocb_rsp++;
-
-			/*
-			 * If resource errors reported from HBA, reduce
-			 * queuedepths of the SCSI device.
-			 */
-			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
-			     (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				lpfc_rampdown_queue_depth(phba);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-			}
-
-			if (irsp->ulpStatus) {
-				/* Rsp ring <ringno> error: IOCB */
-				lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
-						"0328 Rsp Ring %d error: "
-						"IOCB Data: "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x\n",
-						pring->ringno,
-						irsp->un.ulpWord[0],
-						irsp->un.ulpWord[1],
-						irsp->un.ulpWord[2],
-						irsp->un.ulpWord[3],
-						irsp->un.ulpWord[4],
-						irsp->un.ulpWord[5],
-						*(((uint32_t *) irsp) + 6),
-						*(((uint32_t *) irsp) + 7),
-						*(((uint32_t *) irsp) + 8),
-						*(((uint32_t *) irsp) + 9),
-						*(((uint32_t *) irsp) + 10),
-						*(((uint32_t *) irsp) + 11),
-						*(((uint32_t *) irsp) + 12),
-						*(((uint32_t *) irsp) + 13),
-						*(((uint32_t *) irsp) + 14),
-						*(((uint32_t *) irsp) + 15));
-			}
-
-			/*
-			 * Fetch the IOCB command type and call the correct
-			 * completion routine.  Solicited and Unsolicited
-			 * IOCBs on the ELS ring get freed back to the
-			 * lpfc_iocb_list by the discovery kernel thread.
-			 */
-			iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
-			type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
-			if (type == LPFC_SOL_IOCB) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				rc = lpfc_sli_process_sol_iocb(phba, pring,
-							       saveq);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-			} else if (type == LPFC_UNSOL_IOCB) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				rc = lpfc_sli_process_unsol_iocb(phba, pring,
-								 saveq);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-				if (!rc)
-					free_saveq = 0;
-			} else if (type == LPFC_ABORT_IOCB) {
-				if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
-				    ((cmdiocbp =
-				      lpfc_sli_iocbq_lookup(phba, pring,
-							    saveq)))) {
-					/* Call the specified completion
-					   routine */
-					if (cmdiocbp->iocb_cmpl) {
-						spin_unlock_irqrestore(
-						       &phba->hbalock,
-						       iflag);
-						(cmdiocbp->iocb_cmpl) (phba,
-							     cmdiocbp, saveq);
-						spin_lock_irqsave(
-							  &phba->hbalock,
-							  iflag);
-					} else
-						__lpfc_sli_release_iocbq(phba,
-								      cmdiocbp);
-				}
-			} else if (type == LPFC_UNKNOWN_IOCB) {
-				if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
-
-					char adaptermsg[LPFC_MAX_ADPTMSG];
-
-					memset(adaptermsg, 0,
-					       LPFC_MAX_ADPTMSG);
-					memcpy(&adaptermsg[0], (uint8_t *) irsp,
-					       MAX_MSG_DATA);
-					dev_warn(&((phba->pcidev)->dev),
-						 "lpfc%d: %s\n",
-						 phba->brd_no, adaptermsg);
-				} else {
-					/* Unknown IOCB command */
-					lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-							"0335 Unknown IOCB "
-							"command Data: x%x "
-							"x%x x%x x%x\n",
-							irsp->ulpCommand,
-							irsp->ulpStatus,
-							irsp->ulpIoTag,
-							irsp->ulpContext);
-				}
-			}
-
-			if (free_saveq) {
-				list_for_each_entry_safe(rspiocbp, next_iocb,
-							 &saveq->list, list) {
-					list_del(&rspiocbp->list);
-					__lpfc_sli_release_iocbq(phba,
-								 rspiocbp);
-				}
-				__lpfc_sli_release_iocbq(phba, saveq);
-			}
-			rspiocbp = NULL;
-		}
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Handle the response IOCB */
+		rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+		spin_lock_irqsave(&phba->hbalock, iflag);
 
 		/*
 		 * If the port response put pointer has not been updated, sync
@@ -2338,7 +2998,37 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 	}
 
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
-	return rc;
+	return;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflag;
+
+	while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+		/* Get the response iocb from the head of work queue */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
+				 irspiocbq, struct lpfc_iocbq, list);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Process the response iocb */
+		lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+	}
 }
 
 /**
@@ -2420,7 +3110,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdready - Check for host status bits
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
  * @phba: Pointer to HBA context object.
  * @mask: Bit mask to be checked.
  *
@@ -2432,8 +3122,8 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
  * function returns 1 when HBA fail to restart otherwise returns
  * zero.
  **/
-int
-lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
 {
 	uint32_t status;
 	int i = 0;
@@ -2477,6 +3167,56 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
 	return retval;
 }
 
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+	uint32_t status;
+	int retval = 0;
+
+	/* Read the HBA Host Status Register */
+	status = lpfc_sli4_post_status_check(phba);
+
+	if (status) {
+		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+		lpfc_sli_brdrestart(phba);
+		status = lpfc_sli4_post_status_check(phba);
+	}
+
+	/* Check to see if any errors occurred during init */
+	if (status) {
+		phba->link_state = LPFC_HBA_ERROR;
+		retval = 1;
+	} else
+		phba->sli4_hba.intr_enable = 0;
+
+	return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+	return phba->lpfc_sli_brdready(phba, mask);
+}
+
 #define BARRIER_TEST_PATTERN (0xdeadbeef)
 
 /**
@@ -2532,7 +3272,7 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
 		mdelay(1);
 
 	if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
-		if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
+		if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
 		    phba->pport->stopped)
 			goto restore_hc;
 		else
@@ -2613,7 +3353,9 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 		return 1;
 	}
 
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 
 	mempool_free(pmb, phba->mbox_mem_pool);
 
@@ -2636,10 +3378,10 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 	}
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	psli->mbox_active = NULL;
 	phba->link_flag &= ~LS_IGNORE_ERATT;
 	spin_unlock_irq(&phba->hbalock);
 
-	psli->mbox_active = NULL;
 	lpfc_hba_down_post(phba);
 	phba->link_state = LPFC_HBA_ERROR;
 
@@ -2647,7 +3389,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdreset - Reset the HBA
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
  * @phba: Pointer to HBA context object.
  *
  * This function resets the HBA by writing HC_INITFF to the control
@@ -2683,7 +3425,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
 			      (cfg_value &
 			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
-	psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
+	psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
 	/* Now toggle INITFF bit in the Host Control Register */
 	writel(HC_INITFF, phba->HCregaddr);
 	mdelay(1);
@@ -2710,7 +3453,66 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint16_t cfg_value;
+	uint8_t qindx;
+
+	/* Reset HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0295 Reset HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	/* perform board reset */
+	phba->fc_eventTag = 0;
+	phba->pport->fc_myDID = 0;
+	phba->pport->fc_prevDID = 0;
+
+	/* Turn off parity checking and serr during the physical reset */
+	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	pci_write_config_word(phba->pcidev, PCI_COMMAND,
+			      (cfg_value &
+			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~(LPFC_PROCESS_LA);
+	phba->fcf.fcf_flag = 0;
+	/* Clean up the child queue list for the CQs */
+	list_del_init(&phba->sli4_hba.mbx_wq->list);
+	list_del_init(&phba->sli4_hba.els_wq->list);
+	list_del_init(&phba->sli4_hba.hdr_rq->list);
+	list_del_init(&phba->sli4_hba.dat_rq->list);
+	list_del_init(&phba->sli4_hba.mbx_cq->list);
+	list_del_init(&phba->sli4_hba.els_cq->list);
+	list_del_init(&phba->sli4_hba.rxq_cq->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Now physically reset the device */
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0389 Performing PCI function reset!\n");
+	/* Perform FCoE PCI function reset */
+	lpfc_pci_function_reset(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
  * @phba: Pointer to HBA context object.
  *
  * This function is called in the SLI initialization code path to
@@ -2722,8 +3524,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
  * The function does not guarantee completion of MBX_RESTART mailbox
  * command before the return of this function.
  **/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli;
@@ -2762,7 +3564,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
 	lpfc_sli_brdreset(phba);
 	phba->pport->stopped = 0;
 	phba->link_state = LPFC_INIT_START;
-
+	phba->hba_flag = 0;
 	spin_unlock_irq(&phba->hbalock);
 
 	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2777,6 +3579,55 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+
+
+	/* Restart HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0296 Restart HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	lpfc_sli4_brdreset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	phba->pport->stopped = 0;
+	phba->link_state = LPFC_INIT_START;
+	phba->hba_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
+
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = get_seconds();
+
+	lpfc_hba_down_post(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+	return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
  * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
  * @phba: Pointer to HBA context object.
  *
@@ -2940,7 +3791,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
 	if (!pmb)
 		return -ENOMEM;
 
-	pmbox = &pmb->mb;
+	pmbox = &pmb->u.mb;
 
 	/* Initialize the struct lpfc_sli_hbq structure for each hbq */
 	phba->link_state = LPFC_INIT_MBX_CMDS;
@@ -2984,6 +3835,26 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+	phba->hbq_in_use = 1;
+	phba->hbqs[0].entry_count = lpfc_hbq_defs[0]->entry_count;
+	phba->hbq_count = 1;
+	/* Initially populate or replenish the HBQs */
+	lpfc_sli_hbqbuf_init_hbqs(phba, 0);
+	return 0;
+}
+
+/**
  * lpfc_sli_config_port - Issue config port mailbox command
  * @phba: Pointer to HBA context object.
  * @sli_mode: sli mode - 2/3
@@ -3047,33 +3918,43 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0442 Adapter failed to init, mbxCmd x%x "
 				"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
 			spin_lock_irq(&phba->hbalock);
-			phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
+			phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
 			spin_unlock_irq(&phba->hbalock);
 			rc = -ENXIO;
-		} else
+		} else {
+			/* Allow asynchronous mailbox command to go through */
+			spin_lock_irq(&phba->hbalock);
+			phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+			spin_unlock_irq(&phba->hbalock);
 			done = 1;
+		}
 	}
 	if (!done) {
 		rc = -EINVAL;
 		goto do_prep_failed;
 	}
-	if (pmb->mb.un.varCfgPort.sli_mode == 3) {
-		if (!pmb->mb.un.varCfgPort.cMA) {
+	if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+		if (!pmb->u.mb.un.varCfgPort.cMA) {
 			rc = -ENXIO;
 			goto do_prep_failed;
 		}
-		if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+		if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
 			phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
-			phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+			phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+			phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+				phba->max_vpi : phba->max_vports;
+
 		} else
 			phba->max_vpi = 0;
-		if (pmb->mb.un.varCfgPort.gerbm)
+		if (pmb->u.mb.un.varCfgPort.gdss)
+			phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+		if (pmb->u.mb.un.varCfgPort.gerbm)
 			phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
-		if (pmb->mb.un.varCfgPort.gcrp)
+		if (pmb->u.mb.un.varCfgPort.gcrp)
 			phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
-		if (pmb->mb.un.varCfgPort.ginb) {
+		if (pmb->u.mb.un.varCfgPort.ginb) {
 			phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
 			phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
 			phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
@@ -3089,7 +3970,7 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 		}
 
 		if (phba->cfg_enable_bg) {
-			if (pmb->mb.un.varCfgPort.gbg)
+			if (pmb->u.mb.un.varCfgPort.gbg)
 				phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
 			else
 				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -3184,8 +4065,9 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
 		if (rc)
 			goto lpfc_sli_hba_setup_error;
 	}
-
+	spin_lock_irq(&phba->hbalock);
 	phba->sli.sli_flag |= LPFC_PROCESS_LA;
+	spin_unlock_irq(&phba->hbalock);
 
 	rc = lpfc_config_port_post(phba);
 	if (rc)
@@ -3200,6 +4082,488 @@ lpfc_sli_hba_setup_error:
 	return rc;
 }
 
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+		LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *mp;
+	struct lpfc_mqe *mqe;
+	uint32_t data_length;
+	int rc;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	mqe = &mboxq->u.mqe;
+	if (lpfc_dump_fcoe_param(phba, mboxq))
+		return -ENOMEM;
+
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):2571 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	if (rc) {
+		lpfc_mbuf_free(phba, mp->virt, mp->phys);
+		kfree(mp);
+		return -EIO;
+	}
+	data_length = mqe->un.mb_words[5];
+	if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+		return -EIO;
+
+	lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ *	      On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command.  In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		    uint8_t *vpd, uint32_t *vpd_size)
+{
+	int rc = 0;
+	uint32_t dma_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_mqe *mqe;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * Get a DMA buffer for the vpd data resulting from the READ_REV
+	 * mailbox command.
+	 */
+	dma_size = *vpd_size;
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  dma_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, dma_size);
+
+	/*
+	 * The SLI4 implementation of READ_REV conflicts at word1,
+	 * bits 31:16 and SLI4 adds vpd functionality not present
+	 * in SLI3.  This code corrects the conflicts.
+	 */
+	lpfc_read_rev(phba, mboxq);
+	mqe = &mboxq->u.mqe;
+	mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+	mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+	mqe->un.read_rev.word1 &= 0x0000FFFF;
+	bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+	bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc) {
+		dma_free_coherent(&phba->pcidev->dev, dma_size,
+				  dmabuf->virt, dmabuf->phys);
+		return -EIO;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0380 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	/*
+	 * The available vpd length cannot be bigger than the
+	 * DMA buffer passed to the port.  Catch the less than
+	 * case and update the caller's size.
+	 */
+	if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+		*vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+	lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+	dma_free_coherent(&phba->pcidev->dev, dma_size,
+			  dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+	uint8_t fcp_eqidx;
+
+	lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+	lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+	int rc;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mqe *mqe;
+	uint8_t *vpd;
+	uint32_t vpd_size;
+	uint32_t ftr_rsp = 0;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+	struct lpfc_vport *vport = phba->pport;
+	struct lpfc_dmabuf *mp;
+
+	/* Perform a PCI function reset to start from clean */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+
+	/* Check the HBA Host Status Register for readyness */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+	else {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	/*
+	 * Allocate a single mailbox container for initializing the
+	 * port.
+	 */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/*
+	 * Continue initialization with default values even if driver failed
+	 * to read FCoE param config regions
+	 */
+	if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+			"2570 Failed to read FCoE parameters \n");
+
+	/* Issue READ_REV to collect vpd and FW information. */
+	vpd_size = PAGE_SIZE;
+	vpd = kzalloc(vpd_size, GFP_KERNEL);
+	if (!vpd) {
+		rc = -ENOMEM;
+		goto out_free_mbox;
+	}
+
+	rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+	if (unlikely(rc))
+		goto out_free_vpd;
+
+	mqe = &mboxq->u.mqe;
+	if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+		    &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+	    (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+			"0376 READ_REV Error. SLI Level %d "
+			"FCoE enabled %d\n",
+			bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+			bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+	/* Single threaded at this point, no need for lock */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag |= HBA_FCOE_SUPPORT;
+	spin_unlock_irq(&phba->hbalock);
+	/*
+	 * Evaluate the read rev and vpd data. Populate the driver
+	 * state with the results. If this routine fails, the failure
+	 * is not fatal as the driver will use generic values.
+	 */
+	rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+	if (unlikely(!rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0377 Error %d parsing vpd. "
+				"Using defaults.\n", rc);
+		rc = 0;
+	}
+
+	/* By now, we should determine the SLI revision, hard code for now */
+	phba->sli_rev = LPFC_SLI_REV4;
+
+	/*
+	 * Discover the port's supported feature set and match it against the
+	 * hosts requests.
+	 */
+	lpfc_request_features(phba, mboxq);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	/*
+	 * The port must support FCP initiator mode as this is the
+	 * only mode running in the host.
+	 */
+	if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0378 No support for fcpi mode.\n");
+		ftr_rsp++;
+	}
+
+	/*
+	 * If the port cannot support the host's requested features
+	 * then turn off the global config parameters to disable the
+	 * feature in the driver.  This is not a fatal error.
+	 */
+	if ((phba->cfg_enable_bg) &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (phba->max_vpi && phba->cfg_enable_npiv &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (ftr_rsp) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0379 Feature Mismatch Data: x%08x %08x "
+				"x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+				mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+				phba->cfg_enable_npiv, phba->max_vpi);
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+			phba->cfg_enable_bg = 0;
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+			phba->cfg_enable_npiv = 0;
+	}
+
+	/* These SLI3 features are assumed in SLI4 */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Read the port's service parameters. */
+	lpfc_read_sparam(phba, mboxq, vport->vpi);
+	mboxq->vport = vport;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	if (rc == MBX_SUCCESS) {
+		memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+		rc = 0;
+	}
+
+	/*
+	 * This memory was allocated by the lpfc_read_sparam routine. Release
+	 * it to the mbuf pool.
+	 */
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	mboxq->context1 = NULL;
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0382 READ_SPARAM command failed "
+				"status %d, mbxStatus x%x\n",
+				rc, bf_get(lpfc_mqe_status, mqe));
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	if (phba->cfg_soft_wwnn)
+		u64_to_wwn(phba->cfg_soft_wwnn,
+			   vport->fc_sparam.nodeName.u.wwn);
+	if (phba->cfg_soft_wwpn)
+		u64_to_wwn(phba->cfg_soft_wwpn,
+			   vport->fc_sparam.portName.u.wwn);
+	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+	       sizeof(struct lpfc_name));
+	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+	       sizeof(struct lpfc_name));
+
+	/* Update the fc_host data structures with new wwn. */
+	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+	/* Register SGL pool to the device using non-embedded mailbox command */
+	rc = lpfc_sli4_post_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0582 Error %d during sgl post operation", rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Register SCSI SGL pool to the device */
+	rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0383 Error %d during scsi sgl post opeation",
+				rc);
+		/* Some Scsi buffers were moved to the abort scsi list */
+		/* A pci function reset will repost them */
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Post the rpi header region to the device. */
+	rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0393 Error %d during rpi post operation\n",
+				rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+	/* Temporary initialization of lpfc_fip_flag to non-fip */
+	bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+	/* Set up all the queues to the device */
+	rc = lpfc_sli4_queue_setup(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0381 Error %d during queue setup.\n ", rc);
+		goto out_stop_timers;
+	}
+
+	/* Arm the CQs and then EQs on device */
+	lpfc_sli4_arm_cqeq_intr(phba);
+
+	/* Indicate device interrupt mode */
+	phba->sli4_hba.intr_enable = 1;
+
+	/* Allow asynchronous mailbox command to go through */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Post receive buffers to the device */
+	lpfc_sli4_rb_setup(phba);
+
+	/* Start the ELS watchdog timer */
+	/*
+	 * The driver for SLI4 is not yet ready to process timeouts
+	 * or interrupts.  Once it is, the comment bars can be removed.
+	 */
+	/* mod_timer(&vport->els_tmofunc,
+	 *           jiffies + HZ * (phba->fc_ratov*2)); */
+
+	/* Start heart beat timer */
+	mod_timer(&phba->hb_tmofunc,
+		  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+	phba->hb_outstanding = 0;
+	phba->last_completion_time = jiffies;
+
+	/* Start error attention (ERATT) polling timer */
+	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+	/*
+	 * The port is ready, set the host's link state to LINK_DOWN
+	 * in preparation for link interrupts.
+	 */
+	lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+	mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	lpfc_set_loopback_flag(phba);
+	/* Change driver state to LPFC_LINK_DOWN right before init link */
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_LINK_DOWN;
+	spin_unlock_irq(&phba->hbalock);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (unlikely(rc != MBX_NOT_FINISHED)) {
+		kfree(vpd);
+		return 0;
+	} else
+		rc = -EIO;
+
+	/* Unset all the queues set up in this routine when error out */
+	if (rc)
+		lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+	if (rc)
+		lpfc_stop_hba_timers(phba);
+out_free_vpd:
+	kfree(vpd);
+out_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
 
 /**
  * lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3244,7 +4608,7 @@ void
 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 {
 	LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
-	MAILBOX_t *mb = &pmbox->mb;
+	MAILBOX_t *mb = &pmbox->u.mb;
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 
@@ -3281,7 +4645,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->pport->work_port_lock);
 	spin_lock_irq(&phba->hbalock);
 	phba->link_state = LPFC_LINK_UNKNOWN;
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 	pring = &psli->ring[psli->fcp_ring];
@@ -3289,32 +4653,20 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0345 Resetting board due to mailbox timeout\n");
-	/*
-	 * lpfc_offline calls lpfc_sli_hba_down which will clean up
-	 * on oustanding mailbox commands.
-	 */
-	/* If resets are disabled then set error state and return. */
-	if (!phba->cfg_enable_hba_reset) {
-		phba->link_state = LPFC_HBA_ERROR;
-		return;
-	}
-	lpfc_offline_prep(phba);
-	lpfc_offline(phba);
-	lpfc_sli_brdrestart(phba);
-	lpfc_online(phba);
-	lpfc_unblock_mgmt_io(phba);
-	return;
+
+	/* Reset the HBA device */
+	lpfc_reset_hba(phba);
 }
 
 /**
- * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
  * @phba: Pointer to HBA context object.
  * @pmbox: Pointer to mailbox object.
  * @flag: Flag indicating how the mailbox need to be processed.
  *
  * This function is called by discovery code and HBA management code
- * to submit a mailbox command to firmware. This function gets the
- * hbalock to protect the data structures.
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
  * The mailbox command can be submitted in polling mode, in which case
  * this function will wait in a polling loop for the completion of the
  * mailbox.
@@ -3332,8 +4684,9 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
  * return codes the caller owns the mailbox command after the return of
  * the function.
  **/
-int
-lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+		       uint32_t flag)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli = &phba->sli;
@@ -3349,6 +4702,10 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 	spin_lock_irqsave(&phba->hbalock, drvr_flag);
 	if (!pmbox) {
 		/* processing mbox queue from intr_handler */
+		if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			return MBX_SUCCESS;
+		}
 		processing_queue = 1;
 		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 		pmbox = lpfc_mbox_get(phba);
@@ -3365,7 +4722,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 			lpfc_printf_log(phba, KERN_ERR,
 					LOG_MBOX | LOG_VPORT,
 					"1806 Mbox x%x failed. No vport\n",
-					pmbox->mb.mbxCommand);
+					pmbox->u.mb.mbxCommand);
 			dump_stack();
 			goto out_not_finished;
 		}
@@ -3385,21 +4742,29 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 	psli = &phba->sli;
 
-	mb = &pmbox->mb;
+	mb = &pmbox->u.mb;
 	status = MBX_SUCCESS;
 
 	if (phba->link_state == LPFC_HBA_ERROR) {
 		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 
 		/* Mbox command <mbxCommand> cannot issue */
-		LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):0311 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
 		goto out_not_finished;
 	}
 
 	if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
 	    !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
 		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
-		LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2528 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
 		goto out_not_finished;
 	}
 
@@ -3413,14 +4778,24 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2529 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 
-		if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2530 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 
@@ -3462,12 +4837,17 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 	/* If we are not polling, we MUST be in SLI2 mode */
 	if (flag != MBX_POLL) {
-		if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
 		    (mb->mbxCommand != MBX_KILL_BOARD)) {
 			psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2531 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 		/* timeout active mbox command */
@@ -3506,7 +4886,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 	/* next set own bit for the adapter and copy over command word */
 	mb->mbxOwner = OWN_CHIP;
 
-	if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 		/* First copy command data to host SLIM area */
 		lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
 	} else {
@@ -3529,7 +4909,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 		if (mb->mbxCommand == MBX_CONFIG_PORT) {
 			/* switch over to host mailbox */
-			psli->sli_flag |= LPFC_SLI2_ACTIVE;
+			psli->sli_flag |= LPFC_SLI_ACTIVE;
 		}
 	}
 
@@ -3552,7 +4932,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 		writel(CA_MBATT, phba->CAregaddr);
 		readl(phba->CAregaddr); /* flush */
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* First read mbox status word */
 			word0 = *((uint32_t *)phba->mbox);
 			word0 = le32_to_cpu(word0);
@@ -3591,7 +4971,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 				spin_lock_irqsave(&phba->hbalock, drvr_flag);
 			}
 
-			if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+			if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 				/* First copy command data */
 				word0 = *((uint32_t *)phba->mbox);
 				word0 = le32_to_cpu(word0);
@@ -3604,7 +4984,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 					if (((slimword0 & OWN_CHIP) != OWN_CHIP)
 					    && slimmb->mbxStatus) {
 						psli->sli_flag &=
-						    ~LPFC_SLI2_ACTIVE;
+						    ~LPFC_SLI_ACTIVE;
 						word0 = slimword0;
 					}
 				}
@@ -3616,7 +4996,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 			ha_copy = readl(phba->HAregaddr);
 		}
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* copy results back to user */
 			lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
 		} else {
@@ -3643,13 +5023,420 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 out_not_finished:
 	if (processing_queue) {
-		pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+		pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
 		lpfc_mbox_cmpl_put(phba, pmbox);
 	}
 	return MBX_NOT_FINISHED;
 }
 
 /**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port.  The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ *	MBX_SUCCESS - mailbox posted successfully
+ *	Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	int rc = MBX_SUCCESS;
+	unsigned long iflag;
+	uint32_t db_ready;
+	uint32_t mcqe_status;
+	uint32_t mbx_cmnd;
+	unsigned long timeout;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mqe *mb = &mboxq->u.mqe;
+	struct lpfc_bmbx_create *mbox_rgn;
+	struct dma_address *dma_address;
+	struct lpfc_register bmbx_reg;
+
+	/*
+	 * Only one mailbox can be active to the bootstrap mailbox region
+	 * at a time and there is no queueing provided.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2532 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_POLL);
+		return MBXERR_ERROR;
+	}
+	/* The server grabs the token and owns it until release */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/*
+	 * Initialize the bootstrap memory region to avoid stale data areas
+	 * in the mailbox post.  Then copy the caller's mailbox contents to
+	 * the bmbx mailbox region.
+	 */
+	mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+	memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+	lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+			      sizeof(struct lpfc_mqe));
+
+	/* Post the high mailbox dma address to the port and wait for ready. */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/* Post the low mailbox dma address to the port. */
+	writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/*
+	 * Read the CQ to ensure the mailbox has completed.
+	 * If so, update the mailbox status so that the upper layers
+	 * can complete the request normally.
+	 */
+	lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+			      sizeof(struct lpfc_mqe));
+	mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+	lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+			      sizeof(struct lpfc_mcqe));
+	mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+	/* Prefix the mailbox status with range x4000 to note SLI4 status. */
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+		bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+		rc = MBXERR_ERROR;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+			" x%x x%x CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			bf_get(lpfc_mqe_status, mb),
+			mb->un.mb_words[0], mb->un.mb_words[1],
+			mb->un.mb_words[2], mb->un.mb_words[3],
+			mb->un.mb_words[4], mb->un.mb_words[5],
+			mb->un.mb_words[6], mb->un.mb_words[7],
+			mb->un.mb_words[8], mb->un.mb_words[9],
+			mb->un.mb_words[10], mb->un.mb_words[11],
+			mb->un.mb_words[12], mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+exit:
+	/* We are holding the token, no needed for lock when release */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		       uint32_t flag)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	unsigned long iflags;
+	int rc;
+
+	/* Detect polling mode and jump to a handler */
+	if (!phba->sli4_hba.intr_enable) {
+		if (flag == MBX_POLL)
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+		else
+			rc = -EIO;
+		if (rc != MBX_SUCCESS)
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2541 Mailbox command x%x "
+					"(x%x) cannot issue Data: x%x x%x\n",
+					mboxq->vport ? mboxq->vport->vpi : 0,
+					mboxq->u.mb.mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, mboxq),
+					psli->sli_flag, flag);
+		return rc;
+	} else if (flag == MBX_POLL) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2542 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		return -EIO;
+	}
+
+	/* Now, interrupt mode asynchrous mailbox command */
+	rc = lpfc_mbox_cmd_check(phba, mboxq);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2543 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2544 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	/* Put the mailbox command to the driver internal FIFO */
+	psli->slistat.mbox_busy++;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	lpfc_mbox_put(phba, mboxq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0354 Mbox cmd issue - Enqueue Data: "
+			"x%x (x%x) x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+			bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state,
+			psli->sli_flag, MBX_NOWAIT);
+	/* Wake up worker thread to transport mailbox command from head */
+	lpfc_worker_wake_up(phba);
+
+	return MBX_BUSY;
+
+out_not_finished:
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mboxq;
+	int rc = MBX_SUCCESS;
+	unsigned long iflags;
+	struct lpfc_mqe *mqe;
+	uint32_t mbx_cmnd;
+
+	/* Check interrupt mode before post async mailbox command */
+	if (unlikely(!phba->sli4_hba.intr_enable))
+		return MBX_NOT_FINISHED;
+
+	/* Check for mailbox command service token */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (unlikely(phba->sli.mbox_active)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0384 There is pending active mailbox cmd\n");
+		return MBX_NOT_FINISHED;
+	}
+	/* Take the mailbox command service token */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+	/* Get the next mailbox command from head of queue */
+	mboxq = lpfc_mbox_get(phba);
+
+	/* If no more mailbox command waiting for post, we're done */
+	if (!mboxq) {
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_SUCCESS;
+	}
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check device readiness for posting mailbox command */
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc))
+		/* Driver clean routine will clean up pending mailbox */
+		goto out_not_finished;
+
+	/* Prepare the mbox command to be posted */
+	mqe = &mboxq->u.mqe;
+	mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+	/* Start timer for the mbox_tmo and log some mailbox post messages */
+	mod_timer(&psli->mbox_tmo, (jiffies +
+		  (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+			"x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state, psli->sli_flag);
+
+	if (mbx_cmnd != MBX_HEARTBEAT) {
+		if (mboxq->vport) {
+			lpfc_debugfs_disc_trc(mboxq->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Send vport: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		} else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Send: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		}
+	}
+	psli->slistat.mbox_cmd++;
+
+	/* Post the mailbox command to the port */
+	rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2533 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_NOWAIT);
+		goto out_not_finished;
+	}
+
+	return rc;
+
+out_not_finished:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+	__lpfc_mbox_cmpl_put(phba, mboxq);
+	/* Release the token */
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+	return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s3;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s4;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1420 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
  * __lpfc_sli_ringtx_put - Add an iocb to the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -3701,35 +5488,34 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
+ * @ring_number: SLI ring number to issue iocb on.
  * @piocb: Pointer to command iocb.
  * @flag: Flag indicating if this command can be put into txq.
  *
- * __lpfc_sli_issue_iocb is used by other functions in the driver
- * to issue an iocb command to the HBA. If the PCI slot is recovering
- * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT
- * flag is turned on, the function returns IOCB_ERROR.
- * When the link is down, this function allows only iocbs for
- * posting buffers.
- * This function finds next available slot in the command ring and
- * posts the command to the available slot and writes the port
- * attention register to request HBA start processing new iocb.
- * If there is no slot available in the ring and
- * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the
- * txq, otherwise the function returns IOCB_BUSY.
- *
- * This function is called with hbalock held.
- * The function will return success after it successfully submit the
- * iocb to firmware or after adding to the txq.
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
  **/
 static int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
 		    struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	struct lpfc_iocbq *nextiocb;
 	IOCB_t *iocb;
+	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
 
 	if (piocb->iocb_cmpl && (!piocb->vport) &&
 	   (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
@@ -3833,6 +5619,498 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	return IOCB_BUSY;
 }
 
+/**
+ * lpfc_sli4_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @sglq: Pointer to the scatter gather queue object.
+ *
+ * This routine converts the bpl or bde that is in the IOCB
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the IOCB contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the IOCB contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The IOCB is still in cpu endianess so the contents of
+ * the bpl can be used without byte swapping.
+ *
+ * Returns valid XRI = Success, NO_XRI = Failure.
+**/
+static uint16_t
+lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
+		struct lpfc_sglq *sglq)
+{
+	uint16_t xritag = NO_XRI;
+	struct ulp_bde64 *bpl = NULL;
+	struct ulp_bde64 bde;
+	struct sli4_sge *sgl  = NULL;
+	IOCB_t *icmd;
+	int numBdes = 0;
+	int i = 0;
+
+	if (!piocbq || !sglq)
+		return xritag;
+
+	sgl  = (struct sli4_sge *)sglq->sgl;
+	icmd = &piocbq->iocb;
+	if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+		numBdes = icmd->un.genreq64.bdl.bdeSize /
+				sizeof(struct ulp_bde64);
+		/* The addrHigh and addrLow fields within the IOCB
+		 * have not been byteswapped yet so there is no
+		 * need to swap them back.
+		 */
+		bpl  = (struct ulp_bde64 *)
+			((struct lpfc_dmabuf *)piocbq->context3)->virt;
+
+		if (!bpl)
+			return xritag;
+
+		for (i = 0; i < numBdes; i++) {
+			/* Should already be byte swapped. */
+			sgl->addr_hi =  bpl->addrHigh;
+			sgl->addr_lo =  bpl->addrLow;
+			/* swap the size field back to the cpu so we
+			 * can assign it to the sgl.
+			 */
+			bde.tus.w  = le32_to_cpu(bpl->tus.w);
+			bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+			if ((i+1) == numBdes)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			bpl++;
+			sgl++;
+		}
+	} else if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BDE_64) {
+			/* The addrHigh and addrLow fields of the BDE have not
+			 * been byteswapped yet so they need to be swapped
+			 * before putting them in the sgl.
+			 */
+			sgl->addr_hi =
+				cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
+			sgl->addr_lo =
+				cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
+			bf_set(lpfc_sli4_sge_len, sgl,
+				icmd->un.genreq64.bdl.bdeSize);
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+	}
+	return sglq->sli4_xritag;
+}
+
+/**
+ * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ *
+ * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * distribution.
+ *
+ * Return: index into SLI4 fast-path FCP queue index.
+ **/
+static uint32_t
+lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+	static uint32_t fcp_qidx;
+
+	return fcp_qidx++ % phba->cfg_fcp_wq_count;
+}
+
+/**
+ * lpfc_sli_iocb2wqe - Convert the IOCB to a work queue entry.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @wqe: Pointer to the work queue entry.
+ *
+ * This routine converts the iocb command to its Work Queue Entry
+ * equivalent. The wqe pointer should not have any fields set when
+ * this routine is called because it will memcpy over them.
+ * This routine does not set the CQ_ID or the WQEC bits in the
+ * wqe.
+ *
+ * Returns: 0 = Success, IOCB_ERROR = Failure.
+ **/
+static int
+lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
+		union lpfc_wqe *wqe)
+{
+	uint32_t payload_len = 0;
+	uint8_t ct = 0;
+	uint32_t fip;
+	uint32_t abort_tag;
+	uint8_t command_type = ELS_COMMAND_NON_FIP;
+	uint8_t cmnd;
+	uint16_t xritag;
+	struct ulp_bde64 *bpl = NULL;
+
+	fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+	/* The fcp commands will set command type */
+	if ((!(iocbq->iocb_flag &  LPFC_IO_FCP)) && (!fip))
+		command_type = ELS_COMMAND_NON_FIP;
+	else if (!(iocbq->iocb_flag &  LPFC_IO_FCP))
+		command_type = ELS_COMMAND_FIP;
+	else if (iocbq->iocb_flag &  LPFC_IO_FCP)
+		command_type = FCP_COMMAND;
+	else {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2019 Invalid cmd 0x%x\n",
+			iocbq->iocb.ulpCommand);
+		return IOCB_ERROR;
+	}
+	/* Some of the fields are in the right position already */
+	memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
+	abort_tag = (uint32_t) iocbq->iotag;
+	xritag = iocbq->sli4_xritag;
+	wqe->words[7] = 0; /* The ct field has moved so reset */
+	/* words0-2 bpl convert bde */
+	if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+		bpl  = (struct ulp_bde64 *)
+			((struct lpfc_dmabuf *)iocbq->context3)->virt;
+		if (!bpl)
+			return IOCB_ERROR;
+
+		/* Should already be byte swapped. */
+		wqe->generic.bde.addrHigh =  le32_to_cpu(bpl->addrHigh);
+		wqe->generic.bde.addrLow =  le32_to_cpu(bpl->addrLow);
+		/* swap the size field back to the cpu so we
+		 * can assign it to the sgl.
+		 */
+		wqe->generic.bde.tus.w  = le32_to_cpu(bpl->tus.w);
+		payload_len = wqe->generic.bde.tus.f.bdeSize;
+	} else
+		payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
+
+	iocbq->iocb.ulpIoTag = iocbq->iotag;
+	cmnd = iocbq->iocb.ulpCommand;
+
+	switch (iocbq->iocb.ulpCommand) {
+	case CMD_ELS_REQUEST64_CR:
+		if (!iocbq->iocb.ulpLe) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2007 Only Limited Edition cmd Format"
+				" supported 0x%x\n",
+				iocbq->iocb.ulpCommand);
+			return IOCB_ERROR;
+		}
+		wqe->els_req.payload_len = payload_len;
+		/* Els_reguest64 has a TMO */
+		bf_set(wqe_tmo, &wqe->els_req.wqe_com,
+			iocbq->iocb.ulpTimeout);
+		/* Need a VF for word 4 set the vf bit*/
+		bf_set(els_req64_vf, &wqe->els_req, 0);
+		/* And a VFID for word 12 */
+		bf_set(els_req64_vfid, &wqe->els_req, 0);
+		/*
+		 * Set ct field to 3, indicates that the context_tag field
+		 * contains the FCFI and remote N_Port_ID is
+		 * in word 5.
+		 */
+
+		ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+		bf_set(lpfc_wqe_gen_context, &wqe->generic,
+				iocbq->iocb.ulpContext);
+
+		if (iocbq->vport->fc_myDID != 0) {
+			bf_set(els_req64_sid, &wqe->els_req,
+				 iocbq->vport->fc_myDID);
+			bf_set(els_req64_sp, &wqe->els_req, 1);
+		}
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+		/* CCP CCPE PV PRI in word10 were set in the memcpy */
+	break;
+	case CMD_XMIT_SEQUENCE64_CR:
+		/* word3 iocb=io_tag32 wqe=payload_offset */
+		/* payload offset used for multilpe outstanding
+		 * sequences on the same exchange
+		 */
+		wqe->words[3] = 0;
+		/* word4 relative_offset memcpy */
+		/* word5 r_ctl/df_ctl memcpy */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+		wqe->xmit_sequence.xmit_len = payload_len;
+	break;
+	case CMD_XMIT_BCAST64_CN:
+		/* word3 iocb=iotag32 wqe=payload_len */
+		wqe->words[3] = 0; /* no definition for this in wqe */
+		/* word4 iocb=rsvd wqe=rsvd */
+		/* word5 iocb=rctl/type/df_ctl wqe=rctl/type/df_ctl memcpy */
+		/* word6 iocb=ctxt_tag/io_tag wqe=ctxt_tag/xri */
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+	break;
+	case CMD_FCP_IWRITE64_CR:
+		command_type = FCP_COMMAND_DATA_OUT;
+		/* The struct for wqe fcp_iwrite has 3 fields that are somewhat
+		 * confusing.
+		 * word3 is payload_len: byte offset to the sgl entry for the
+		 * fcp_command.
+		 * word4 is total xfer len, same as the IOCB->ulpParameter.
+		 * word5 is initial xfer len 0 = wait for xfer-ready
+		 */
+
+		/* Always wait for xfer-ready before sending data */
+		wqe->fcp_iwrite.initial_xfer_len = 0;
+		/* word 4 (xfer length) should have been set on the memcpy */
+
+	/* allow write to fall through to read */
+	case CMD_FCP_IREAD64_CR:
+		/* FCP_CMD is always the 1st sgl entry */
+		wqe->fcp_iread.payload_len =
+			payload_len + sizeof(struct fcp_rsp);
+
+		/* word 4 (xfer length) should have been set on the memcpy */
+
+		bf_set(lpfc_wqe_gen_erp, &wqe->generic,
+			iocbq->iocb.ulpFCP2Rcvy);
+		bf_set(lpfc_wqe_gen_lnk, &wqe->generic, iocbq->iocb.ulpXS);
+		/* The XC bit and the XS bit are similar. The driver never
+		 * tracked whether or not the exchange was previouslly open.
+		 * XC = Exchange create, 0 is create. 1 is already open.
+		 * XS = link cmd: 1 do not close the exchange after command.
+		 * XS = 0 close exchange when command completes.
+		 * The only time we would not set the XC bit is when the XS bit
+		 * is set and we are sending our 2nd or greater command on
+		 * this exchange.
+		 */
+
+	/* ALLOW read & write to fall through to ICMD64 */
+	case CMD_FCP_ICMND64_CR:
+		/* Always open the exchange */
+		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
+
+		wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+	break;
+	case CMD_GEN_REQUEST64_CR:
+		/* word3 command length is described as byte offset to the
+		 * rsp_data. Would always be 16, sizeof(struct sli4_sge)
+		 * sgl[0] = cmnd
+		 * sgl[1] = rsp.
+		 *
+		 */
+		wqe->gen_req.command_len = payload_len;
+		/* Word4 parameter  copied in the memcpy */
+		/* Word5 [rctl, type, df_ctl, la] copied in memcpy */
+		/* word6 context tag copied in memcpy */
+		if (iocbq->iocb.ulpCt_h  || iocbq->iocb.ulpCt_l) {
+			ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2015 Invalid CT %x command 0x%x\n",
+				ct, iocbq->iocb.ulpCommand);
+			return IOCB_ERROR;
+		}
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic, 0);
+		bf_set(wqe_tmo, &wqe->gen_req.wqe_com,
+			iocbq->iocb.ulpTimeout);
+
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		command_type = OTHER_COMMAND;
+	break;
+	case CMD_XMIT_ELS_RSP64_CX:
+		/* words0-2 BDE memcpy */
+		/* word3 iocb=iotag32 wqe=rsvd */
+		wqe->words[3] = 0;
+		/* word4 iocb=did wge=rsvd. */
+		wqe->words[4] = 0;
+		/* word5 iocb=rsvd wge=did */
+		bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+			 iocbq->iocb.un.elsreq64.remoteID);
+
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+		if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
+			bf_set(lpfc_wqe_gen_context, &wqe->generic,
+			       iocbq->vport->vpi + phba->vpi_base);
+		command_type = OTHER_COMMAND;
+	break;
+	case CMD_CLOSE_XRI_CN:
+	case CMD_ABORT_XRI_CN:
+	case CMD_ABORT_XRI_CX:
+		/* words 0-2 memcpy should be 0 rserved */
+		/* port will send abts */
+		if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+			/*
+			 * The link is down so the fw does not need to send abts
+			 * on the wire.
+			 */
+			bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+		else
+			bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+		bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+		abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+		wqe->words[5] = 0;
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+		abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+		wqe->generic.abort_tag = abort_tag;
+		/*
+		 * The abort handler will send us CMD_ABORT_XRI_CN or
+		 * CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
+		 */
+		bf_set(lpfc_wqe_gen_command, &wqe->generic, CMD_ABORT_XRI_CX);
+		cmnd = CMD_ABORT_XRI_CX;
+		command_type = OTHER_COMMAND;
+		xritag = 0;
+	break;
+	case CMD_XRI_ABORTED_CX:
+	case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
+		/* words0-2 are all 0's no bde */
+		/* word3 and word4 are rsvrd */
+		wqe->words[3] = 0;
+		wqe->words[4] = 0;
+		/* word5 iocb=rsvd wge=did */
+		/* There is no remote port id in the IOCB? */
+		/* Let this fall through and fail */
+	case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
+	case CMD_FCP_TSEND64_CX: /* Target mode send xfer-ready */
+	case CMD_FCP_TRSP64_CX: /* Target mode rcv */
+	case CMD_FCP_AUTO_TRSP_CX: /* Auto target rsp */
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2014 Invalid command 0x%x\n",
+				iocbq->iocb.ulpCommand);
+		return IOCB_ERROR;
+	break;
+
+	}
+	bf_set(lpfc_wqe_gen_xri, &wqe->generic, xritag);
+	bf_set(lpfc_wqe_gen_request_tag, &wqe->generic, iocbq->iotag);
+	wqe->generic.abort_tag = abort_tag;
+	bf_set(lpfc_wqe_gen_cmd_type, &wqe->generic, command_type);
+	bf_set(lpfc_wqe_gen_command, &wqe->generic, cmnd);
+	bf_set(lpfc_wqe_gen_class, &wqe->generic, iocbq->iocb.ulpClass);
+	bf_set(lpfc_wqe_gen_cq_id, &wqe->generic, LPFC_WQE_CQ_ID_DEFAULT);
+
+	return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+			 struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_sglq *sglq;
+	uint16_t xritag;
+	union lpfc_wqe wqe;
+	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
+	uint32_t fcp_wqidx;
+
+	if (piocb->sli4_xritag == NO_XRI) {
+		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+			piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+			sglq = NULL;
+		else {
+			sglq = __lpfc_sli_get_sglq(phba);
+			if (!sglq)
+				return IOCB_ERROR;
+			piocb->sli4_xritag = sglq->sli4_xritag;
+		}
+	} else if (piocb->iocb_flag &  LPFC_IO_FCP) {
+		sglq = NULL; /* These IO's already have an XRI and
+			      * a mapped sgl.
+			      */
+	} else {
+		/* This is a continuation of a commandi,(CX) so this
+		 * sglq is on the active list
+		 */
+		sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
+		if (!sglq)
+			return IOCB_ERROR;
+	}
+
+	if (sglq) {
+		xritag = lpfc_sli4_bpl2sgl(phba, piocb, sglq);
+		if (xritag != sglq->sli4_xritag)
+			return IOCB_ERROR;
+	}
+
+	if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+		return IOCB_ERROR;
+
+	if (piocb->iocb_flag &  LPFC_IO_FCP) {
+		fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
+		if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+			return IOCB_ERROR;
+	} else {
+		if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+			return IOCB_ERROR;
+	}
+	lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+	return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 	IOCB_ERROR - Error
+ * 	IOCB_SUCCESS - Success
+ * 	IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+		struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1419 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+	return 0;
+}
 
 /**
  * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
@@ -3848,14 +6126,14 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
  * functions which do not hold hbalock.
  **/
 int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 		    struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	unsigned long iflags;
 	int rc;
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
+	rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 
 	return rc;
@@ -4148,6 +6426,52 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+	LIST_HEAD(completions);
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *pmb;
+	unsigned long iflag;
+
+	/* Flush all the mailbox commands in the mbox system */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* The pending mailbox command queue */
+	list_splice_init(&phba->sli.mboxq, &completions);
+	/* The outstanding active mailbox command */
+	if (psli->mbox_active) {
+		list_add_tail(&psli->mbox_active->list, &completions);
+		psli->mbox_active = NULL;
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	}
+	/* The completed mailbox command queue */
+	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+	while (!list_empty(&completions)) {
+		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+		pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		if (pmb->mbox_cmpl)
+			pmb->mbox_cmpl(phba, pmb);
+	}
+}
+
+/**
  * lpfc_sli_host_down - Vport cleanup function
  * @vport: Pointer to virtual port object.
  *
@@ -4240,9 +6564,11 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_dmabuf *buf_ptr;
-	LPFC_MBOXQ_t *pmb;
-	int i;
 	unsigned long flags = 0;
+	int i;
+
+	/* Shutdown the mailbox command sub-system */
+	lpfc_sli_mbox_sys_shutdown(phba);
 
 	lpfc_hba_down_prep(phba);
 
@@ -4287,28 +6613,42 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 
 	/* Return any active mbox cmds */
 	del_timer_sync(&psli->mbox_tmo);
-	spin_lock_irqsave(&phba->hbalock, flags);
 
-	spin_lock(&phba->pport->work_port_lock);
+	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
-	spin_unlock(&phba->pport->work_port_lock);
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
 
-	/* Return any pending or completed mbox cmds */
-	list_splice_init(&phba->sli.mboxq, &completions);
-	if (psli->mbox_active) {
-		list_add_tail(&psli->mbox_active->list, &completions);
-		psli->mbox_active = NULL;
-		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-	}
-	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
-	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return 1;
+}
+
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+	/* Stop the SLI4 device port */
+	lpfc_stop_port(phba);
+
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
 
-	while (!list_empty(&completions)) {
-		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
-		pmb->mb.mbxStatus = MBX_NOT_FINISHED;
-		if (pmb->mbox_cmpl)
-			pmb->mbox_cmpl(phba,pmb);
-	}
 	return 1;
 }
 
@@ -4639,7 +6979,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	iabt = &abtsiocbp->iocb;
 	iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
 	iabt->un.acxri.abortContextTag = icmd->ulpContext;
-	iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+	else
+		iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
 	iabt->ulpLe = 1;
 	iabt->ulpClass = icmd->ulpClass;
 
@@ -4655,7 +6998,7 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			 "abort cmd iotag x%x\n",
 			 iabt->un.acxri.abortContextTag,
 			 iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
-	retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+	retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
 
 	if (retval)
 		__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -4838,7 +7181,10 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
 		cmd = &iocbq->iocb;
 		abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
 		abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
-		abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+		else
+			abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
 		abtsiocb->iocb.ulpLe = 1;
 		abtsiocb->iocb.ulpClass = cmd->ulpClass;
 		abtsiocb->vport = phba->pport;
@@ -4850,7 +7196,8 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
 
 		/* Setup callback routine and issue the command. */
 		abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
-		ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+		ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+					      abtsiocb, 0);
 		if (ret_val == IOCB_ERROR) {
 			lpfc_sli_release_iocbq(phba, abtsiocb);
 			errcnt++;
@@ -4931,7 +7278,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
  **/
 int
 lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
-			 struct lpfc_sli_ring *pring,
+			 uint32_t ring_number,
 			 struct lpfc_iocbq *piocb,
 			 struct lpfc_iocbq *prspiocbq,
 			 uint32_t timeout)
@@ -4962,7 +7309,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 		readl(phba->HCregaddr); /* flush */
 	}
 
-	retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+	retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
 	if (retval == IOCB_SUCCESS) {
 		timeout_req = timeout * HZ;
 		timeleft = wait_event_timeout(done_q,
@@ -5077,53 +7424,156 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
 }
 
 /**
- * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
  * @phba: Pointer to HBA context.
  *
- * This function is called to cleanup any pending mailbox
- * objects in the driver queue before bringing the HBA offline.
- * This function is called while resetting the HBA.
- * The function is called without any lock held. The function
- * takes hbalock to update SLI data structure.
- * This function returns 1 when there is an active mailbox
- * command pending else returns 0.
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
  **/
-int
-lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
 {
-	struct lpfc_vport *vport = phba->pport;
-	int i = 0;
-	uint32_t ha_copy;
+	struct lpfc_sli *psli = &phba->sli;
+	uint8_t actcmd = MBX_HEARTBEAT;
+	unsigned long timeout;
 
-	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
-		if (i++ > LPFC_MBOX_TMO * 1000)
-			return 1;
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
 
-		/*
-		 * Call lpfc_sli_handle_mb_event only if a mailbox cmd
-		 * did finish. This way we won't get the misleading
-		 * "Stray Mailbox Interrupt" message.
-		 */
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 		spin_lock_irq(&phba->hbalock);
-		ha_copy = phba->work_ha;
-		phba->work_ha &= ~HA_MBATT;
+		if (phba->sli.mbox_active)
+			actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
 		spin_unlock_irq(&phba->hbalock);
+		/* Determine how long we might wait for the active mailbox
+		 * command to be gracefully completed by firmware.
+		 */
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
+					   1000) + jiffies;
+		while (phba->sli.mbox_active) {
+			/* Check active mailbox complete status every 2ms */
+			msleep(2);
+			if (time_after(jiffies, timeout))
+				/* Timeout, let the mailbox flush routine to
+				 * forcefully release active mailbox command
+				 */
+				break;
+		}
+	}
+	lpfc_sli_mbox_sys_flush(phba);
+}
+
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t ha_copy;
 
-		if (ha_copy & HA_MBATT)
-			if (lpfc_sli_handle_mb_event(phba) == 0)
-				i = 0;
+	/* Read chip Host Attention (HA) register */
+	ha_copy = readl(phba->HAregaddr);
+	if (ha_copy & HA_ERATT) {
+		/* Read host status register to retrieve error event */
+		lpfc_sli_read_hs(phba);
+
+		/* Check if there is a deferred error condition is active */
+		if ((HS_FFER1 & phba->work_hs) &&
+		    ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+		     HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag |= DEFER_ERATT;
+			spin_unlock_irq(&phba->hbalock);
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr);
+		}
 
-		msleep(1);
+		/* Set the driver HA work bitmap */
+		spin_lock_irq(&phba->hbalock);
+		phba->work_ha |= HA_ERATT;
+		/* Indicate polling handles this ERATT */
+		phba->hba_flag |= HBA_ERATT_HANDLED;
+		spin_unlock_irq(&phba->hbalock);
+		return 1;
 	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t uerr_sta_hi, uerr_sta_lo;
+	uint32_t onlnreg0, onlnreg1;
 
-	return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+	/* For now, use the SLI4 device internal unrecoverable error
+	 * registers for error attention. This can be changed later.
+	 */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+		uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerr_sta_lo || uerr_sta_hi) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1423 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerr_sta_lo, uerr_sta_hi,
+					onlnreg0, onlnreg1);
+			/* TEMP: as the driver error recover logic is not
+			 * fully developed, we just log the error message
+			 * and the device error attention action is now
+			 * temporarily disabled.
+			 */
+			return 0;
+			phba->work_status[0] = uerr_sta_lo;
+			phba->work_status[1] = uerr_sta_hi;
+			spin_lock_irq(&phba->hbalock);
+			/* Set the driver HA work bitmap */
+			phba->work_ha |= HA_ERATT;
+			/* Indicate polling handles this ERATT */
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			spin_unlock_irq(&phba->hbalock);
+			return 1;
+		}
+	}
+	return 0;
 }
 
 /**
  * lpfc_sli_check_eratt - check error attention events
  * @phba: Pointer to HBA context.
  *
- * This function is called form timer soft interrupt context to check HBA's
+ * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
  * This fucntion returns 1 when there is Error Attention in the Host Attention
@@ -5134,10 +7584,6 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 {
 	uint32_t ha_copy;
 
-	/* If PCI channel is offline, don't process it */
-	if (unlikely(pci_channel_offline(phba->pcidev)))
-		return 0;
-
 	/* If somebody is waiting to handle an eratt, don't process it
 	 * here. The brdkill function will do this.
 	 */
@@ -5161,56 +7607,84 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 		return 0;
 	}
 
-	/* Read chip Host Attention (HA) register */
-	ha_copy = readl(phba->HAregaddr);
-	if (ha_copy & HA_ERATT) {
-		/* Read host status register to retrieve error event */
-		lpfc_sli_read_hs(phba);
-
-		/* Check if there is a deferred error condition is active */
-		if ((HS_FFER1 & phba->work_hs) &&
-			((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
-			HS_FFER6 | HS_FFER7) & phba->work_hs)) {
-			phba->hba_flag |= DEFER_ERATT;
-			/* Clear all interrupt enable conditions */
-			writel(0, phba->HCregaddr);
-			readl(phba->HCregaddr);
-		}
-
-		/* Set the driver HA work bitmap */
-		phba->work_ha |= HA_ERATT;
-		/* Indicate polling handles this ERATT */
-		phba->hba_flag |= HBA_ERATT_HANDLED;
+	/* If PCI channel is offline, don't process it */
+	if (unlikely(pci_channel_offline(phba->pcidev))) {
 		spin_unlock_irq(&phba->hbalock);
-		return 1;
+		return 0;
+	}
+
+	switch (phba->sli_rev) {
+	case LPFC_SLI_REV2:
+	case LPFC_SLI_REV3:
+		/* Read chip Host Attention (HA) register */
+		ha_copy = lpfc_sli_eratt_read(phba);
+		break;
+	case LPFC_SLI_REV4:
+		/* Read devcie Uncoverable Error (UERR) registers */
+		ha_copy = lpfc_sli4_eratt_read(phba);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0299 Invalid SLI revision (%d)\n",
+				phba->sli_rev);
+		ha_copy = 0;
+		break;
 	}
 	spin_unlock_irq(&phba->hbalock);
+
+	return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+	/* If the pci channel is offline, ignore all the interrupts */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -EIO;
+
+	/* Update device level interrupt statistics */
+	phba->sli.slistat.sli_intr++;
+
+	/* Ignore all interrupts during initialization. */
+	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		return -EIO;
+
 	return 0;
 }
 
 /**
- * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
  * This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there are slow-path events in the HBA. However,
- * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
- * this function is called as part of the device-level interrupt handler.
- * When the PCI slot is in error recovery or the HBA is undergoing
- * initialization, the interrupt handler will not process the interrupt.
- * The link attention and ELS ring attention events are handled by the
- * worker thread. The interrupt handler signals the worker thread and
- * and returns for these events. This function is called without any
- * lock held. It gets the hbalock to access and update SLI data
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
  * structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_sp_intr_handler(int irq, void *dev_id)
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	uint32_t ha_copy;
@@ -5240,13 +7714,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 	 * individual interrupt handler in MSI-X multi-message interrupt mode
 	 */
 	if (phba->intr_type == MSIX) {
-		/* If the pci channel is offline, ignore all the interrupts */
-		if (unlikely(pci_channel_offline(phba->pcidev)))
-			return IRQ_NONE;
-		/* Update device-level interrupt statistics */
-		phba->sli.slistat.sli_intr++;
-		/* Ignore all interrupts during initialization. */
-		if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for slow-path events */
 		spin_lock_irqsave(&phba->hbalock, iflag);
@@ -5271,7 +7740,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 		 * interrupt.
 		 */
 		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
-			spin_unlock_irq(&phba->hbalock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return IRQ_NONE;
 		}
 
@@ -5364,7 +7833,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 
 		if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
 			pmb = phba->sli.mbox_active;
-			pmbox = &pmb->mb;
+			pmbox = &pmb->u.mb;
 			mbox = phba->mbox;
 			vport = pmb->vport;
 
@@ -5434,7 +7903,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 							LOG_MBOX | LOG_SLI,
 							"0350 rc should have"
 							"been MBX_BUSY");
-						goto send_current_mbox;
+						if (rc != MBX_NOT_FINISHED)
+							goto send_current_mbox;
 					}
 				}
 				spin_lock_irqsave(
@@ -5471,29 +7941,29 @@ send_current_mbox:
 	}
 	return IRQ_HANDLED;
 
-} /* lpfc_sp_intr_handler */
+} /* lpfc_sli_sp_intr_handler */
 
 /**
- * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
  * This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there is a fast-path FCP IOCB ring event in the
- * HBA. However, when the device is enabled with either MSI or Pin-IRQ
- * interrupt mode, this function is called as part of the device-level
- * interrupt handler. When the PCI slot is in error recovery or the HBA
- * is undergoing initialization, the interrupt handler will not process
- * the interrupt. The SCSI FCP fast-path ring event are handled in the
- * intrrupt context. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_fp_intr_handler(int irq, void *dev_id)
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	uint32_t ha_copy;
@@ -5513,13 +7983,8 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 	 * individual interrupt handler in MSI-X multi-message interrupt mode
 	 */
 	if (phba->intr_type == MSIX) {
-		/* If pci channel is offline, ignore all the interrupts */
-		if (unlikely(pci_channel_offline(phba->pcidev)))
-			return IRQ_NONE;
-		/* Update device-level interrupt statistics */
-		phba->sli.slistat.sli_intr++;
-		/* Ignore all interrupts during initialization. */
-		if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for FCP ring and other ring events */
 		ha_copy = readl(phba->HAregaddr);
@@ -5530,7 +7995,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 		 * any interrupt.
 		 */
 		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
-			spin_unlock_irq(&phba->hbalock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return IRQ_NONE;
 		}
 		writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
@@ -5566,26 +8031,27 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 		}
 	}
 	return IRQ_HANDLED;
-}  /* lpfc_fp_intr_handler */
+}  /* lpfc_sli_fp_intr_handler */
 
 /**
- * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
- * This function is the device-level interrupt handler called from the PCI
- * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
- * an event in the HBA which requires driver attention. This function
- * invokes the slow-path interrupt attention handling function and fast-path
- * interrupt attention handling function in turn to process the relevant
- * HBA attention events. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled, else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sli_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	irqreturn_t sp_irq_rc, fp_irq_rc;
@@ -5600,15 +8066,8 @@ lpfc_intr_handler(int irq, void *dev_id)
 	if (unlikely(!phba))
 		return IRQ_NONE;
 
-	/* If the pci channel is offline, ignore all the interrupts. */
-	if (unlikely(pci_channel_offline(phba->pcidev)))
-		return IRQ_NONE;
-
-	/* Update device level interrupt statistics */
-	phba->sli.slistat.sli_intr++;
-
-	/* Ignore all interrupts during initialization. */
-	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+	/* Check device state for handling interrupt */
+	if (lpfc_intr_state_check(phba))
 		return IRQ_NONE;
 
 	spin_lock(&phba->hbalock);
@@ -5650,7 +8109,7 @@ lpfc_intr_handler(int irq, void *dev_id)
 	status2 >>= (4*LPFC_ELS_RING);
 
 	if (status1 || (status2 & HA_RXMASK))
-		sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+		sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
 	else
 		sp_irq_rc = IRQ_NONE;
 
@@ -5670,10 +8129,3322 @@ lpfc_intr_handler(int irq, void *dev_id)
 		status2 = 0;
 
 	if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
-		fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+		fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
 	else
 		fp_irq_rc = IRQ_NONE;
 
 	/* Return device-level interrupt handling status */
 	return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
-}  /* lpfc_intr_handler */
+}  /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_fcp_xri_abort_event_proc - Process fcp xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 FCP abort XRI events.
+ **/
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the fcp xri abort event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~FCP_XRI_ABORT_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the fcp xri abort events */
+	while (!list_empty(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Notify aborted XRI for FCP work queue */
+		lpfc_sli4_fcp_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the els xri abort event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the els xri abort events */
+	while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Notify aborted XRI for ELS work queue */
+		lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+			      struct lpfc_iocbq *pIocbOut,
+			      struct lpfc_wcqe_complete *wcqe)
+{
+	size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+	memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+	       sizeof(struct lpfc_iocbq) - offset);
+	memset(&pIocbIn->sli4_info, 0,
+	       sizeof(struct lpfc_sli4_rspiocb_info));
+	/* Map WCQE parameters into irspiocb parameters */
+	pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+	if (pIocbOut->iocb_flag & LPFC_IO_FCP)
+		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+			pIocbIn->iocb.un.fcpi.fcpi_parm =
+					pIocbOut->iocb.un.fcpi.fcpi_parm -
+					wcqe->total_data_placed;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	else
+		pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	/* Load in additional WCQE parameters */
+	pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
+	pIocbIn->sli4_info.bfield = 0;
+	if (bf_get(lpfc_wcqe_c_xb, wcqe))
+		pIocbIn->sli4_info.bfield |= LPFC_XB;
+	if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
+		pIocbIn->sli4_info.bfield |= LPFC_PV;
+		pIocbIn->sli4_info.priority =
+					bf_get(lpfc_wcqe_c_priority, wcqe);
+	}
+}
+
+/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchrous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0392 Async Event: word0:x%x, word1:x%x, "
+			"word2:x%x, word3:x%x\n", mcqe->word0,
+			mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0394 Failed to allocate CQ_EVENT entry\n");
+		return false;
+	}
+
+	/* Move the CQE into an asynchronous event entry */
+	memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe));
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+	/* Set the async event flag */
+	phba->hba_flag |= ASYNC_EVENT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	uint32_t mcqe_status;
+	MAILBOX_t *mbox, *pmbox;
+	struct lpfc_mqe *mqe;
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *mp;
+	unsigned long iflags;
+	LPFC_MBOXQ_t *pmb;
+	bool workposted = false;
+	int rc;
+
+	/* If not a mailbox complete MCQE, out by checking mailbox consume */
+	if (!bf_get(lpfc_trailer_completed, mcqe))
+		goto out_no_mqe_complete;
+
+	/* Get the reference to the active mbox command */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pmb = phba->sli.mbox_active;
+	if (unlikely(!pmb)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"1832 No pending MBOX command to handle\n");
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		goto out_no_mqe_complete;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	mqe = &pmb->u.mqe;
+	pmbox = (MAILBOX_t *)&pmb->u.mqe;
+	mbox = phba->mbox;
+	vport = pmb->vport;
+
+	/* Reset heartbeat timer */
+	phba->last_completion_time = jiffies;
+	del_timer(&phba->sli.mbox_tmo);
+
+	/* Move mbox data to caller's mailbox region, do endian swapping */
+	if (pmb->mbox_cmpl && mbox)
+		lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+	/* Set the mailbox status with SLI4 range 0x4000 */
+	mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS)
+		bf_set(lpfc_mqe_status, mqe,
+		       (LPFC_MBX_ERROR_RANGE | mcqe_status));
+
+	if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+		pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+				      "MBOX dflt rpi: status:x%x rpi:x%x",
+				      mcqe_status,
+				      pmbox->un.varWords[0], 0);
+		if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+			mp = (struct lpfc_dmabuf *)(pmb->context1);
+			ndlp = (struct lpfc_nodelist *)pmb->context2;
+			/* Reg_LOGIN of dflt RPI was successful. Now lets get
+			 * RID of the PPI using the same mbox buffer.
+			 */
+			lpfc_unreg_login(phba, vport->vpi,
+					 pmbox->un.varWords[0], pmb);
+			pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+			pmb->context1 = mp;
+			pmb->context2 = ndlp;
+			pmb->vport = vport;
+			rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+			if (rc != MBX_BUSY)
+				lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
+						LOG_SLI, "0385 rc should "
+						"have been MBX_BUSY\n");
+			if (rc != MBX_NOT_FINISHED)
+				goto send_current_mbox;
+		}
+	}
+	spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+	/* There is mailbox completion work to do */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_mbox_cmpl_put(phba, pmb);
+	phba->work_ha |= HA_MBATT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+send_current_mbox:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Release the mailbox command posting token */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	/* Setting active mailbox pointer need to be in sync to flag clear */
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	/* Wake up worker thread to post the next pending mailbox command */
+	lpfc_worker_wake_up(phba);
+out_no_mqe_complete:
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchrous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+	struct lpfc_mcqe mcqe;
+	bool workposted;
+
+	/* Copy the mailbox MCQE and convert endian order as needed */
+	lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+	/* Invoke the proper event handling routine */
+	if (!bf_get(lpfc_trailer_async, &mcqe))
+		workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+	else
+		workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflags;
+	bool workposted = false;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pring->stats.iocb_event++;
+	/* Look up the ELS command IOCB and create pseudo response IOCB */
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0386 ELS complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return workposted;
+	}
+
+	/* Fake the irspiocbq and copy necessary response information */
+	irspiocbq = lpfc_sli_get_iocbq(phba);
+	if (!irspiocbq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0387 Failed to allocate an iocbq\n");
+		return workposted;
+	}
+	lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+	/* Add the irspiocb to the response IOCB work list */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Indicate ELS ring attention */
+	phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	/* Check for the slow-path ELS work queue */
+	if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+		lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+				     bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+	else
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2579 Slow-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+				bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+				phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+				   struct lpfc_queue *cq,
+				   struct sli4_wcqe_xri_aborted *wcqe)
+{
+	bool workposted = false;
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0602 Failed to allocate CQ_EVENT entry\n");
+		return false;
+	}
+
+	/* Move the CQE into the proper xri abort event list */
+	memcpy(&cq_event->cqe, wcqe, sizeof(struct sli4_wcqe_xri_aborted));
+	switch (cq->subtype) {
+	case LPFC_FCP:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+		/* Set the fcp xri abort event flag */
+		phba->hba_flag |= FCP_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case LPFC_ELS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+		/* Set the els xri abort event flag */
+		phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0603 Invalid work queue CQE subtype (x%x)\n",
+				cq->subtype);
+		workposted = false;
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_complete wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ complete event */
+		workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+					(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_sp_handle_rel_wcqe(phba,
+					(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+					(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0388 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+	struct lpfc_rcqe rcqe;
+	bool workposted = false;
+	struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+	struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+	struct hbq_dmabuf *dma_buf;
+	uint32_t status;
+	unsigned long iflags;
+
+	/* Copy the receive queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
+	lpfc_sli4_rq_release(hrq, drq);
+	if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
+		goto out;
+	if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+		goto out;
+
+	status = bf_get(lpfc_rcqe_status, &rcqe);
+	switch (status) {
+	case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2537 Receive Frame Truncated!!\n");
+	case FC_STATUS_RQ_SUCCESS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+		if (!dma_buf) {
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			goto out;
+		}
+		memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+		/* save off the frame for the word thread to process */
+		list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+		/* Frame received */
+		phba->hba_flag |= HBA_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case FC_STATUS_INSUFF_BUF_NEED_BUF:
+	case FC_STATUS_INSUFF_BUF_FRM_DISC:
+		/* Post more buffers if possible */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	}
+out:
+	return workposted;
+
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
+{
+	struct lpfc_queue *cq = NULL, *childq, *speq;
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	int ecount = 0;
+	uint16_t cqid;
+
+	if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
+	    bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0359 Not a valid slow-path completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get(lpfc_eqe_major_code, eqe),
+				bf_get(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get(lpfc_eqe_resource_id, eqe);
+
+	/* Search for completion queue pointer matching this cqid */
+	speq = phba->sli4_hba.sp_eq;
+	list_for_each_entry(childq, &speq->child_list, list) {
+		if (childq->queue_id == cqid) {
+			cq = childq;
+			break;
+		}
+	}
+	if (unlikely(!cq)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0365 Slow-path CQ identifier (%d) does "
+				"not exist\n", cqid);
+		return;
+	}
+
+	/* Process all the entries to the CQ */
+	switch (cq->type) {
+	case LPFC_MCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	case LPFC_WCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	case LPFC_RCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0370 Invalid completion queue type (%d)\n",
+				cq->type);
+		return;
+	}
+
+	/* Catch the no cq entry condition, log an error */
+	if (unlikely(ecount == 0))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0371 No entry from the CQ: identifier "
+				"(x%x), type (%d)\n", cq->queue_id, cq->type);
+
+	/* In any case, flash and re-arm the RCQ */
+	lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_FCP_RING];
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq irspiocbq;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pring->stats.iocb_event++;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check for response status */
+	if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+		/* If resource errors reported from HBA, reduce queue
+		 * depth of the SCSI device.
+		 */
+		if ((bf_get(lpfc_wcqe_c_status, wcqe) ==
+		     IOSTAT_LOCAL_REJECT) &&
+		    (wcqe->parameter == IOERR_NO_RESOURCES)) {
+			phba->lpfc_rampdown_queue_depth(phba);
+		}
+		/* Log the error status */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0373 FCP complete error: status=x%x, "
+				"hw_status=x%x, total_data_specified=%d, "
+				"parameter=x%x, word3=x%x\n",
+				bf_get(lpfc_wcqe_c_status, wcqe),
+				bf_get(lpfc_wcqe_c_hw_status, wcqe),
+				wcqe->total_data_placed, wcqe->parameter,
+				wcqe->word3);
+	}
+
+	/* Look up the FCP command IOCB and create pseudo response IOCB */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0374 FCP complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+	if (unlikely(!cmdiocbq->iocb_cmpl)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0375 FCP cmdiocb not callback function "
+				"iotag: (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+
+	/* Fake the irspiocb and copy necessary response information */
+	lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+
+	/* Pass the cmd_iocb and the rsp state to the upper layer */
+	(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	struct lpfc_queue *childwq;
+	bool wqid_matched = false;
+	uint16_t fcp_wqid;
+
+	/* Check for fast-path FCP work queue release */
+	fcp_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+	list_for_each_entry(childwq, &cq->child_list, list) {
+		if (childwq->queue_id == fcp_wqid) {
+			lpfc_sli4_wq_release(childwq,
+					bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+			wqid_matched = true;
+			break;
+		}
+	}
+	/* Report warning log message if no match found */
+	if (wqid_matched != true)
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2580 Fast-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x\n", fcp_wqid);
+}
+
+/**
+ * lpfc_sli4_fp_handle_wcqe - Process fast-path work queue completion entry
+ * @cq: Pointer to the completion queue.
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static int
+lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_release wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ complete event */
+		lpfc_sli4_fp_handle_fcp_wcqe(phba,
+				(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+				(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+				(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0144 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+			uint32_t fcp_cqidx)
+{
+	struct lpfc_queue *cq;
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	uint16_t cqid;
+	int ecount = 0;
+
+	if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
+	    unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0366 Not a valid fast-path completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get(lpfc_eqe_major_code, eqe),
+				bf_get(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
+	if (unlikely(!cq)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0367 Fast-path completion queue does not "
+				"exist\n");
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get(lpfc_eqe_resource_id, eqe);
+	if (unlikely(cqid != cq->queue_id)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0368 Miss-matched fast-path completion "
+				"queue identifier: eqcqid=%d, fcpcqid=%d\n",
+				cqid, cq->queue_id);
+		return;
+	}
+
+	/* Process all the entries to the CQ */
+	while ((cqe = lpfc_sli4_cq_get(cq))) {
+		workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Catch the no cq entry condition */
+	if (unlikely(ecount == 0))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0369 No entry from fast-path completion "
+				"queue fcpcqid=%d\n", cq->queue_id);
+
+	/* In any case, flash and re-arm the CQ */
+	lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+static void
+lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	struct lpfc_eqe *eqe;
+
+	/* walk all the EQ entries and drop on the floor */
+	while ((eqe = lpfc_sli4_eq_get(eq)))
+		;
+
+	/* Clear and re-arm the EQ */
+	lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_sp_intr_handler - Slow-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA is
+ * undergoing initialization, the interrupt handler will not process the
+ * interrupt. The link attention and ELS ring attention events are handled
+ * by the worker thread. The interrupt handler signals the worker thread
+ * and returns for these events. This function is called without any lock
+ * held. It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_sp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_queue *speq;
+	struct lpfc_eqe *eqe;
+	unsigned long iflag;
+	int ecount = 0;
+
+	/*
+	 * Get the driver's phba structure from the dev_id
+	 */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	speq = phba->sli4_hba.sp_eq;
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eq_flush(phba, speq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Process all the event on FCP slow-path EQ
+	 */
+	while ((eqe = lpfc_sli4_eq_get(speq))) {
+		lpfc_sli4_sp_handle_eqe(phba, eqe);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_eq_release(speq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Always clear and re-arm the slow-path EQ */
+	lpfc_sli4_eq_release(speq, LPFC_QUEUE_REARM);
+
+	/* Catch the no cq entry condition */
+	if (unlikely(ecount == 0)) {
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0357 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_sp_intr_handler */
+
+/**
+ * lpfc_sli4_fp_intr_handler - Fast-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures. Note that,
+ * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is
+ * equal to that of FCP CQ index.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_fp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl;
+	struct lpfc_queue *fpeq;
+	struct lpfc_eqe *eqe;
+	unsigned long iflag;
+	int ecount = 0;
+	uint32_t fcp_eqidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	fcp_eq_hdl = (struct lpfc_fcp_eq_hdl *)dev_id;
+	phba = fcp_eq_hdl->phba;
+	fcp_eqidx = fcp_eq_hdl->idx;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	fpeq = phba->sli4_hba.fp_eq[fcp_eqidx];
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eq_flush(phba, fpeq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Process all the event on FCP fast-path EQ
+	 */
+	while ((eqe = lpfc_sli4_eq_get(fpeq))) {
+		lpfc_sli4_fp_handle_eqe(phba, eqe, fcp_eqidx);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Always clear and re-arm the fast-path EQ */
+	lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+
+	if (unlikely(ecount == 0)) {
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0358 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_fp_intr_handler */
+
+/**
+ * lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler to device with SLI-4
+ * interface spec, called from the PCI layer when either MSI or Pin-IRQ
+ * interrupt mode is enabled and there is an event in the HBA which requires
+ * driver attention. This function invokes the slow-path interrupt attention
+ * handling function and fast-path interrupt attention handling function in
+ * turn to process the relevant HBA attention events. This function is called
+ * without any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	irqreturn_t sp_irq_rc, fp_irq_rc;
+	bool fp_handled = false;
+	uint32_t fcp_eqidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/*
+	 * Invokes slow-path host attention interrupt handling as appropriate.
+	 */
+	sp_irq_rc = lpfc_sli4_sp_intr_handler(irq, dev_id);
+
+	/*
+	 * Invoke fast-path host attention interrupt handling as appropriate.
+	 */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		fp_irq_rc = lpfc_sli4_fp_intr_handler(irq,
+					&phba->sli4_hba.fcp_eq_hdl[fcp_eqidx]);
+		if (fp_irq_rc == IRQ_HANDLED)
+			fp_handled |= true;
+	}
+
+	return (fp_handled == true) ? IRQ_HANDLED : sp_irq_rc;
+} /* lpfc_sli4_intr_handler */
+
+/**
+ * lpfc_sli4_queue_free - free a queue structure and associated memory
+ * @queue: The queue structure to free.
+ *
+ * This function frees a queue structure and the DMAable memeory used for
+ * the host resident queue. This function must be called after destroying the
+ * queue on the HBA.
+ **/
+void
+lpfc_sli4_queue_free(struct lpfc_queue *queue)
+{
+	struct lpfc_dmabuf *dmabuf;
+
+	if (!queue)
+		return;
+
+	while (!list_empty(&queue->page_list)) {
+		list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
+				 list);
+		dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE,
+				  dmabuf->virt, dmabuf->phys);
+		kfree(dmabuf);
+	}
+	kfree(queue);
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_alloc - Allocate and initialize a queue structure
+ * @phba: The HBA that this queue is being created on.
+ * @entry_size: The size of each queue entry for this queue.
+ * @entry count: The number of entries that this queue will handle.
+ *
+ * This function allocates a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called before creating the
+ * queue on the HBA.
+ **/
+struct lpfc_queue *
+lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
+		      uint32_t entry_count)
+{
+	struct lpfc_queue *queue;
+	struct lpfc_dmabuf *dmabuf;
+	int x, total_qe_count;
+	void *dma_pointer;
+
+
+	queue = kzalloc(sizeof(struct lpfc_queue) +
+			(sizeof(union sli4_qe) * entry_count), GFP_KERNEL);
+	if (!queue)
+		return NULL;
+	queue->page_count = (PAGE_ALIGN(entry_size * entry_count))/PAGE_SIZE;
+	INIT_LIST_HEAD(&queue->list);
+	INIT_LIST_HEAD(&queue->page_list);
+	INIT_LIST_HEAD(&queue->child_list);
+	for (x = 0, total_qe_count = 0; x < queue->page_count; x++) {
+		dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+		if (!dmabuf)
+			goto out_fail;
+		dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+						  PAGE_SIZE, &dmabuf->phys,
+						  GFP_KERNEL);
+		if (!dmabuf->virt) {
+			kfree(dmabuf);
+			goto out_fail;
+		}
+		dmabuf->buffer_tag = x;
+		list_add_tail(&dmabuf->list, &queue->page_list);
+		/* initialize queue's entry array */
+		dma_pointer = dmabuf->virt;
+		for (; total_qe_count < entry_count &&
+		     dma_pointer < (PAGE_SIZE + dmabuf->virt);
+		     total_qe_count++, dma_pointer += entry_size) {
+			queue->qe[total_qe_count].address = dma_pointer;
+		}
+	}
+	queue->entry_size = entry_size;
+	queue->entry_count = entry_count;
+	queue->phba = phba;
+
+	return queue;
+out_fail:
+	lpfc_sli4_queue_free(queue);
+	return NULL;
+}
+
+/**
+ * lpfc_eq_create - Create an Event Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @eq: The queue structure to use to create the event queue.
+ * @imax: The maximum interrupt per second limit.
+ *
+ * This function creates an event queue, as detailed in @eq, on a port,
+ * described by @phba by sending an EQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @eq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the EQ_CREATE mailbox command to the HBA to setup the
+ * event queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
+{
+	struct lpfc_mbx_eq_create *eq_create;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint16_t dmult;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	eq_create = &mbox->u.mqe.un.eq_create;
+	bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
+	       eq->page_count);
+	bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
+	       LPFC_EQE_SIZE);
+	bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+	/* Calculate delay multiper from maximum interrupt per second */
+	dmult = LPFC_DMULT_CONST/imax - 1;
+	bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
+	       dmult);
+	switch (eq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0360 Unsupported EQ count. (%d)\n",
+				eq->entry_count);
+		if (eq->entry_count < 256)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 256:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_4096);
+		break;
+	}
+	list_for_each_entry(dmabuf, &eq->page_list, list) {
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->context1 = NULL;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2500 EQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	eq->type = LPFC_EQ;
+	eq->subtype = LPFC_NONE;
+	eq->queue_id = bf_get(lpfc_mbx_eq_create_q_id, &eq_create->u.response);
+	if (eq->queue_id == 0xFFFF)
+		status = -ENXIO;
+	eq->host_index = 0;
+	eq->hba_index = 0;
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_create - Create a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cq: The queue structure to use to create the completion queue.
+ * @eq: The event queue to bind this completion queue to.
+ *
+ * This function creates a completion queue, as detailed in @wq, on a port,
+ * described by @phba by sending a CQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CQ_CREATE mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
+	       struct lpfc_queue *eq, uint32_t type, uint32_t subtype)
+{
+	struct lpfc_mbx_cq_create *cq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	cq_create = &mbox->u.mqe.un.cq_create;
+	bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
+		    cq->page_count);
+	bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_eq_id, &cq_create->u.request.context, eq->queue_id);
+	switch (cq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0361 Unsupported CQ count. (%d)\n",
+				cq->entry_count);
+		if (cq->entry_count < 256)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 256:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_1024);
+		break;
+	}
+	list_for_each_entry(dmabuf, &cq->page_list, list) {
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2501 CQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	if (cq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	/* link the cq onto the parent eq child list */
+	list_add_tail(&cq->list, &eq->child_list);
+	/* Set up completion queue's type and subtype */
+	cq->type = type;
+	cq->subtype = subtype;
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	cq->host_index = 0;
+	cq->hba_index = 0;
+out:
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_mq_create *mq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	mq_create = &mbox->u.mqe.un.mq_create;
+	bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+		    mq->page_count);
+	bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+		    cq->queue_id);
+	bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+	switch (mq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0362 Unsupported MQ count. (%d)\n",
+				mq->entry_count);
+		if (mq->entry_count < 16)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 16:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_16);
+		break;
+	case 32:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_32);
+		break;
+	case 64:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_64);
+		break;
+	case 128:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_128);
+		break;
+	}
+	list_for_each_entry(dmabuf, &mq->page_list, list) {
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2502 MQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response);
+	if (mq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	mq->type = LPFC_MQ;
+	mq->subtype = subtype;
+	mq->host_index = 0;
+	mq->hba_index = 0;
+
+	/* link the mq onto the parent cq child list */
+	list_add_tail(&mq->list, &cq->child_list);
+out:
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_create - Create a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @wq: The queue structure to use to create the work queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a work queue, as detailed in @wq, on a port, described
+ * by @phba by sending a WQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @wq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @cq
+ * is used to indicate which completion queue to bind this work queue to. This
+ * function will send the WQ_CREATE mailbox command to the HBA to setup the
+ * work queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_wq_create *wq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	wq_create = &mbox->u.mqe.un.wq_create;
+	bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
+		    wq->page_count);
+	bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
+		    cq->queue_id);
+	list_for_each_entry(dmabuf, &wq->page_list, list) {
+		wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2503 WQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+	if (wq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	wq->type = LPFC_WQ;
+	wq->subtype = subtype;
+	wq->host_index = 0;
+	wq->hba_index = 0;
+
+	/* link the wq onto the parent cq child list */
+	list_add_tail(&wq->list, &cq->child_list);
+out:
+	if (rc == MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_create - Create a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrq: The queue structure to use to create the header receive queue.
+ * @drq: The queue structure to use to create the data receive queue.
+ * @cq: The completion queue to bind this work queue to.
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+	       struct lpfc_queue *drq, struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_rq_create *rq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (hrq->entry_count != drq->entry_count)
+		return -EINVAL;
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	rq_create = &mbox->u.mqe.un.rq_create;
+	switch (hrq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2535 Unsupported RQ count. (%d)\n",
+				hrq->entry_count);
+		if (hrq->entry_count < 512)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 512:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_512);
+		break;
+	case 1024:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_4096);
+		break;
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       hrq->page_count);
+	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+	       LPFC_HDR_BUF_SIZE);
+	list_for_each_entry(dmabuf, &hrq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2504 RQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (hrq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->type = LPFC_HRQ;
+	hrq->subtype = subtype;
+	hrq->host_index = 0;
+	hrq->hba_index = 0;
+
+	/* now create the data queue */
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	switch (drq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2536 Unsupported RQ count. (%d)\n",
+				drq->entry_count);
+		if (drq->entry_count < 512)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 512:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_512);
+		break;
+	case 1024:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_4096);
+		break;
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       drq->page_count);
+	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+	       LPFC_DATA_BUF_SIZE);
+	list_for_each_entry(dmabuf, &drq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (drq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->type = LPFC_DRQ;
+	drq->subtype = subtype;
+	drq->host_index = 0;
+	drq->hba_index = 0;
+
+	/* link the header and data RQs onto the parent cq child list */
+	list_add_tail(&hrq->list, &cq->child_list);
+	list_add_tail(&drq->list, &cq->child_list);
+
+out:
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_eq_destroy - Destroy an event Queue on the HBA
+ * @eq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @eq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @eq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!eq)
+		return -ENODEV;
+	mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_eq_destroy_q_id, &mbox->u.mqe.un.eq_destroy.u.request,
+	       eq->queue_id);
+	mbox->vport = eq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+
+	rc = lpfc_sli_issue_mbox(eq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.eq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2505 EQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+
+	/* Remove eq from any list */
+	list_del_init(&eq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, eq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_destroy - Destroy a Completion Queue on the HBA
+ * @cq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @cq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @cq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!cq)
+		return -ENODEV;
+	mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_cq_destroy_q_id, &mbox->u.mqe.un.cq_destroy.u.request,
+	       cq->queue_id);
+	mbox->vport = cq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(cq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_create.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2506 CQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove cq from any list */
+	list_del_init(&cq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, cq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @qm: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!mq)
+		return -ENODEV;
+	mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+	       mq->queue_id);
+	mbox->vport = mq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2507 MQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove mq from any list */
+	list_del_init(&mq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, mq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_destroy - Destroy a Work Queue on the HBA
+ * @wq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @wq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @wq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!wq)
+		return -ENODEV;
+	mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_wq_destroy_q_id, &mbox->u.mqe.un.wq_destroy.u.request,
+	       wq->queue_id);
+	mbox->vport = wq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(wq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2508 WQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove wq from any list */
+	list_del_init(&wq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, wq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_destroy - Destroy a Receive Queue on the HBA
+ * @rq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @rq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @rq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+		struct lpfc_queue *drq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!hrq || !drq)
+		return -ENODEV;
+	mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_destroy) -
+		  sizeof(struct mbox_header));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       hrq->queue_id);
+	mbox->vport = hrq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(hrq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2509 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		if (rc != MBX_TIMEOUT)
+			mempool_free(mbox, hrq->phba->mbox_mem_pool);
+		return -ENXIO;
+	}
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       drq->queue_id);
+	rc = lpfc_sli_issue_mbox(drq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2510 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	list_del_init(&hrq->list);
+	list_del_init(&drq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, hrq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_sli4_post_sgl - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ * @pdma_phys_addr0: Physical address of the 1st SGL page.
+ * @pdma_phys_addr1: Physical address of the 2nd SGL page.
+ * @xritag: the xritag that ties this io to the SGL pages.
+ *
+ * This routine will post the sgl pages for the IO that has the xritag
+ * that is in the iocbq structure. The xritag is assigned during iocbq
+ * creation and persists for as long as the driver is loaded.
+ * if the caller has fewer than 256 scatter gather segments to map then
+ * pdma_phys_addr1 should be 0.
+ * If the caller needs to map more than 256 scatter gather segment then
+ * pdma_phys_addr1 should be a valid physical address.
+ * physical address for SGLs must be 64 byte aligned.
+ * If you are going to map 2 SGL's then the first one must have 256 entries
+ * the second sgl can have between 1 and 256 entries.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_post_sgl(struct lpfc_hba *phba,
+		dma_addr_t pdma_phys_addr0,
+		dma_addr_t pdma_phys_addr1,
+		uint16_t xritag)
+{
+	struct lpfc_mbx_post_sgl_pages *post_sgl_pages;
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (xritag == NO_XRI) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0364 Invalid param:\n");
+		return -EINVAL;
+	}
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+			sizeof(struct lpfc_mbx_post_sgl_pages) -
+			sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+
+	post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
+				&mbox->u.mqe.un.post_sgl_pages;
+	bf_set(lpfc_post_sgl_pages_xri, post_sgl_pages, xritag);
+	bf_set(lpfc_post_sgl_pages_xricnt, post_sgl_pages, 1);
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr0));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr0));
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr1));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2511 POST_SGL mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return 0;
+}
+/**
+ * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ *
+ * This routine will remove all of the sgl pages registered with the hba.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
+			LPFC_SLI4_MBX_EMBED);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_next_xritag - Get an xritag for the io
+ * @phba: Pointer to HBA context object.
+ *
+ * This function gets an xritag for the iocb. If there is no unused xritag
+ * it will return 0xffff.
+ * The function returns the allocated xritag if successful, else returns zero.
+ * Zero is not a valid xritag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli4_next_xritag(struct lpfc_hba *phba)
+{
+	uint16_t xritag;
+
+	spin_lock_irq(&phba->hbalock);
+	xritag = phba->sli4_hba.next_xri;
+	if ((xritag != (uint16_t) -1) && xritag <
+		(phba->sli4_hba.max_cfg_param.max_xri
+			+ phba->sli4_hba.max_cfg_param.xri_base)) {
+		phba->sli4_hba.next_xri++;
+		phba->sli4_hba.max_cfg_param.xri_used++;
+		spin_unlock_irq(&phba->hbalock);
+		return xritag;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2004 Failed to allocate XRI.last XRITAG is %d"
+			" Max XRI is %d, Used XRI is %d\n",
+			phba->sli4_hba.next_xri,
+			phba->sli4_hba.max_cfg_param.max_xri,
+			phba->sli4_hba.max_cfg_param.xri_used);
+	return -1;
+}
+
+/**
+ * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+int
+lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int els_xri_cnt, rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* The number of sgls to be posted */
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+
+	reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2559 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2560 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0285 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	if (unlikely(!mbox->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2525 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
+		sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+				cpu_to_le32(putPaddrLow(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+				cpu_to_le32(putPaddrLow(0));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(0));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = sglq_entry->sli4_xritag;
+		sgl_pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2513 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @sblist: pointer to scsi buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+int
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
+			      int cnt)
+{
+	struct lpfc_scsi_buf *psb;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	dma_addr_t pdma_phys_bpl1;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* Calculate the requested length of the dma memory */
+	reqlen = cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0217 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0283 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+				LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+				LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2561 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	if (unlikely(!mbox->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2565 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	pg_pairs = 0;
+	list_for_each_entry(psb, sblist, list) {
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+			cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+			cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+			cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+			cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = psb->cur_iocbq.sli4_xritag;
+		sgl_pg_pairs++;
+		pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2564 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
+ * @phba: pointer to lpfc_hba struct that the frame was received on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function checks the fields in the @fc_hdr to see if the FC frame is a
+ * valid type of frame that the LPFC driver will handle. This function will
+ * return a zero if the frame is a valid frame or a non zero value when the
+ * frame does not pass the check.
+ **/
+static int
+lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
+{
+	char *rctl_names[] = FC_RCTL_NAMES_INIT;
+	char *type_names[] = FC_TYPE_NAMES_INIT;
+	struct fc_vft_header *fc_vft_hdr;
+
+	switch (fc_hdr->fh_r_ctl) {
+	case FC_RCTL_DD_UNCAT:		/* uncategorized information */
+	case FC_RCTL_DD_SOL_DATA:	/* solicited data */
+	case FC_RCTL_DD_UNSOL_CTL:	/* unsolicited control */
+	case FC_RCTL_DD_SOL_CTL:	/* solicited control or reply */
+	case FC_RCTL_DD_UNSOL_DATA:	/* unsolicited data */
+	case FC_RCTL_DD_DATA_DESC:	/* data descriptor */
+	case FC_RCTL_DD_UNSOL_CMD:	/* unsolicited command */
+	case FC_RCTL_DD_CMD_STATUS:	/* command status */
+	case FC_RCTL_ELS_REQ:	/* extended link services request */
+	case FC_RCTL_ELS_REP:	/* extended link services reply */
+	case FC_RCTL_ELS4_REQ:	/* FC-4 ELS request */
+	case FC_RCTL_ELS4_REP:	/* FC-4 ELS reply */
+	case FC_RCTL_BA_NOP:  	/* basic link service NOP */
+	case FC_RCTL_BA_ABTS: 	/* basic link service abort */
+	case FC_RCTL_BA_RMC: 	/* remove connection */
+	case FC_RCTL_BA_ACC:	/* basic accept */
+	case FC_RCTL_BA_RJT:	/* basic reject */
+	case FC_RCTL_BA_PRMT:
+	case FC_RCTL_ACK_1:	/* acknowledge_1 */
+	case FC_RCTL_ACK_0:	/* acknowledge_0 */
+	case FC_RCTL_P_RJT:	/* port reject */
+	case FC_RCTL_F_RJT:	/* fabric reject */
+	case FC_RCTL_P_BSY:	/* port busy */
+	case FC_RCTL_F_BSY:	/* fabric busy to data frame */
+	case FC_RCTL_F_BSYL:	/* fabric busy to link control frame */
+	case FC_RCTL_LCR:	/* link credit reset */
+	case FC_RCTL_END:	/* end */
+		break;
+	case FC_RCTL_VFTH:	/* Virtual Fabric tagging Header */
+		fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+		fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
+		return lpfc_fc_frame_check(phba, fc_hdr);
+	default:
+		goto drop;
+	}
+	switch (fc_hdr->fh_type) {
+	case FC_TYPE_BLS:
+	case FC_TYPE_ELS:
+	case FC_TYPE_FCP:
+	case FC_TYPE_CT:
+		break;
+	case FC_TYPE_IP:
+	case FC_TYPE_ILS:
+	default:
+		goto drop;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+			"2538 Received frame rctl:%s type:%s\n",
+			rctl_names[fc_hdr->fh_r_ctl],
+			type_names[fc_hdr->fh_type]);
+	return 0;
+drop:
+	lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+			"2539 Dropped frame rctl:%s type:%s\n",
+			rctl_names[fc_hdr->fh_r_ctl],
+			type_names[fc_hdr->fh_type]);
+	return 1;
+}
+
+/**
+ * lpfc_fc_hdr_get_vfi - Get the VFI from an FC frame
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function processes the FC header to retrieve the VFI from the VF
+ * header, if one exists. This function will return the VFI if one exists
+ * or 0 if no VSAN Header exists.
+ **/
+static uint32_t
+lpfc_fc_hdr_get_vfi(struct fc_frame_header *fc_hdr)
+{
+	struct fc_vft_header *fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+
+	if (fc_hdr->fh_r_ctl != FC_RCTL_VFTH)
+		return 0;
+	return bf_get(fc_vft_hdr_vf_id, fc_vft_hdr);
+}
+
+/**
+ * lpfc_fc_frame_to_vport - Finds the vport that a frame is destined to
+ * @phba: Pointer to the HBA structure to search for the vport on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ * @fcfi: The FC Fabric ID that the frame came from
+ *
+ * This function searches the @phba for a vport that matches the content of the
+ * @fc_hdr passed in and the @fcfi. This function uses the @fc_hdr to fetch the
+ * VFI, if the Virtual Fabric Tagging Header exists, and the DID. This function
+ * returns the matching vport pointer or NULL if unable to match frame to a
+ * vport.
+ **/
+static struct lpfc_vport *
+lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
+		       uint16_t fcfi)
+{
+	struct lpfc_vport **vports;
+	struct lpfc_vport *vport = NULL;
+	int i;
+	uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
+			fc_hdr->fh_d_id[1] << 8 |
+			fc_hdr->fh_d_id[2]);
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+			if (phba->fcf.fcfi == fcfi &&
+			    vports[i]->vfi == lpfc_fc_hdr_get_vfi(fc_hdr) &&
+			    vports[i]->fc_myDID == did) {
+				vport = vports[i];
+				break;
+			}
+		}
+	lpfc_destroy_vport_work_array(phba, vports);
+	return vport;
+}
+
+/**
+ * lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
+ * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
+ *
+ * This function searches through the existing incomplete sequences that have
+ * been sent to this @vport. If the frame matches one of the incomplete
+ * sequences then the dbuf in the @dmabuf is added to the list of frames that
+ * make up that sequence. If no sequence is found that matches this frame then
+ * the function will add the hbuf in the @dmabuf to the @vport's rcv_buffer_list
+ * This function returns a pointer to the first dmabuf in the sequence list that
+ * the frame was linked to.
+ **/
+static struct hbq_dmabuf *
+lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *new_hdr;
+	struct fc_frame_header *temp_hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct lpfc_dmabuf *h_buf;
+	struct hbq_dmabuf *seq_dmabuf = NULL;
+	struct hbq_dmabuf *temp_dmabuf = NULL;
+
+	new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* Use the hdr_buf to find the sequence that this frame belongs to */
+	list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+		temp_hdr = (struct fc_frame_header *)h_buf->virt;
+		if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+		    (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+		    (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+			continue;
+		/* found a pending sequence that matches this frame */
+		seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		break;
+	}
+	if (!seq_dmabuf) {
+		/*
+		 * This indicates first frame received for this sequence.
+		 * Queue the buffer on the vport's rcv_buffer_list.
+		 */
+		list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+		return dmabuf;
+	}
+	temp_hdr = seq_dmabuf->hbuf.virt;
+	if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+		list_add(&seq_dmabuf->dbuf.list, &dmabuf->dbuf.list);
+		return dmabuf;
+	}
+	/* find the correct place in the sequence to insert this frame */
+	list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
+		temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
+		/*
+		 * If the frame's sequence count is greater than the frame on
+		 * the list then insert the frame right after this frame
+		 */
+		if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+			list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
+			return seq_dmabuf;
+		}
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_seq_complete - Indicates if a sequence is complete
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function checks the sequence, starting with the frame described by
+ * @dmabuf, to see if all the frames associated with this sequence are present.
+ * the frames associated with this sequence are linked to the @dmabuf using the
+ * dbuf list. This function looks for two major things. 1) That the first frame
+ * has a sequence count of zero. 2) There is a frame with last frame of sequence
+ * set. 3) That there are no holes in the sequence count. The function will
+ * return 1 when the sequence is complete, otherwise it will return 0.
+ **/
+static int
+lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct hbq_dmabuf *seq_dmabuf;
+	uint32_t fctl;
+	int seq_count = 0;
+
+	hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* make sure first fame of sequence has a sequence count of zero */
+	if (hdr->fh_seq_cnt != seq_count)
+		return 0;
+	fctl = (hdr->fh_f_ctl[0] << 16 |
+		hdr->fh_f_ctl[1] << 8 |
+		hdr->fh_f_ctl[2]);
+	/* If last frame of sequence we can return success. */
+	if (fctl & FC_FC_END_SEQ)
+		return 1;
+	list_for_each_entry(d_buf, &dmabuf->dbuf.list, list) {
+		seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		/* If there is a hole in the sequence count then fail. */
+		if (++seq_count != hdr->fh_seq_cnt)
+			return 0;
+		fctl = (hdr->fh_f_ctl[0] << 16 |
+			hdr->fh_f_ctl[1] << 8 |
+			hdr->fh_f_ctl[2]);
+		/* If last frame of sequence we can return success. */
+		if (fctl & FC_FC_END_SEQ)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_prep_seq - Prep sequence for ULP processing
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function takes a sequence, described by a list of frames, and creates
+ * a list of iocbq structures to describe the sequence. This iocbq list will be
+ * used to issue to the generic unsolicited sequence handler. This routine
+ * returns a pointer to the first iocbq in the list. If the function is unable
+ * to allocate an iocbq then it throw out the received frames that were not
+ * able to be described and return a pointer to the first iocbq. If unable to
+ * allocate any iocbqs (including the first) this function will return NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
+{
+	struct lpfc_dmabuf *d_buf, *n_buf;
+	struct lpfc_iocbq *first_iocbq, *iocbq;
+	struct fc_frame_header *fc_hdr;
+	uint32_t sid;
+
+	fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+	/* remove from receive buffer list */
+	list_del_init(&seq_dmabuf->hbuf.list);
+	/* get the Remote Port's SID */
+	sid = (fc_hdr->fh_s_id[0] << 16 |
+	       fc_hdr->fh_s_id[1] << 8 |
+	       fc_hdr->fh_s_id[2]);
+	/* Get an iocbq struct to fill in. */
+	first_iocbq = lpfc_sli_get_iocbq(vport->phba);
+	if (first_iocbq) {
+		/* Initialize the first IOCB. */
+		first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
+		first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+		first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
+		first_iocbq->iocb.unsli3.rcvsli3.vpi =
+					vport->vpi + vport->phba->vpi_base;
+		/* put the first buffer into the first IOCBq */
+		first_iocbq->context2 = &seq_dmabuf->dbuf;
+		first_iocbq->context3 = NULL;
+		first_iocbq->iocb.ulpBdeCount = 1;
+		first_iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+		first_iocbq->iocb.un.rcvels.remoteID = sid;
+	}
+	iocbq = first_iocbq;
+	/*
+	 * Each IOCBq can have two Buffers assigned, so go through the list
+	 * of buffers for this sequence and save two buffers in each IOCBq
+	 */
+	list_for_each_entry_safe(d_buf, n_buf, &seq_dmabuf->dbuf.list, list) {
+		if (!iocbq) {
+			lpfc_in_buf_free(vport->phba, d_buf);
+			continue;
+		}
+		if (!iocbq->context3) {
+			iocbq->context3 = d_buf;
+			iocbq->iocb.ulpBdeCount++;
+			iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+		} else {
+			iocbq = lpfc_sli_get_iocbq(vport->phba);
+			if (!iocbq) {
+				if (first_iocbq) {
+					first_iocbq->iocb.ulpStatus =
+							IOSTAT_FCP_RSP_ERROR;
+					first_iocbq->iocb.un.ulpWord[4] =
+							IOERR_NO_RESOURCES;
+				}
+				lpfc_in_buf_free(vport->phba, d_buf);
+				continue;
+			}
+			iocbq->context2 = d_buf;
+			iocbq->context3 = NULL;
+			iocbq->iocb.ulpBdeCount = 1;
+			iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+			iocbq->iocb.un.rcvels.remoteID = sid;
+			list_add_tail(&iocbq->list, &first_iocbq->list);
+		}
+	}
+	return first_iocbq;
+}
+
+/**
+ * lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function processes all
+ * the received buffers and gives it to upper layers when a received buffer
+ * indicates that it is the final frame in the sequence. The interrupt
+ * service routine processes received buffers at interrupt contexts and adds
+ * received dma buffers to the rb_pend_list queue and signals the worker thread.
+ * Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
+ * appropriate receive function when the final frame in a sequence is received.
+ **/
+int
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cmplq);
+	struct hbq_dmabuf *dmabuf, *seq_dmabuf;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_vport *vport;
+	uint32_t fcfi;
+	struct lpfc_iocbq *iocbq;
+
+	/* Clear hba flag and get all received buffers into the cmplq */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~HBA_RECEIVE_BUFFER;
+	list_splice_init(&phba->rb_pend_list, &cmplq);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Process each received buffer */
+	while ((dmabuf = lpfc_sli_hbqbuf_get(&cmplq)) != NULL) {
+		fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+		/* check to see if this a valid type of frame */
+		if (lpfc_fc_frame_check(phba, fc_hdr)) {
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->rcqe);
+		vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
+		if (!vport) {
+			/* throw out the frame */
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		/* Link this frame */
+		seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+		if (!seq_dmabuf) {
+			/* unable to add frame to vport - throw it out */
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		/* If not last frame in sequence continue processing frames. */
+		if (!lpfc_seq_complete(seq_dmabuf)) {
+			/*
+			 * When saving off frames post a new one and mark this
+			 * frame to be freed when it is finished.
+			 **/
+			lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
+			dmabuf->tag = -1;
+			continue;
+		}
+		fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+		if (!lpfc_complete_unsol_iocb(phba,
+					      &phba->sli.ring[LPFC_ELS_RING],
+					      iocbq, fc_hdr->fh_r_ctl,
+					      fc_hdr->fh_type))
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"2540 Ring %d handler: unexpected Rctl "
+					"x%x Type x%x received\n",
+					LPFC_ELS_RING,
+					fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+	};
+	return 0;
+}
+
+/**
+ * lpfc_sli4_post_all_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * This routine does not require any locks.  It's usage is expected
+ * to be driver load or reset recovery when the driver is
+ * sequential.
+ *
+ * Return codes
+ * 	0 - sucessful
+ *      EIO - The mailbox failed to complete successfully.
+ * 	When this error occurs, the driver is not guaranteed
+ *	to have any rpi regions posted to the device and
+ *	must either attempt to repost the regions or take a
+ *	fatal error.
+ **/
+int
+lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_page;
+	uint32_t rc = 0;
+
+	/* Post all rpi memory regions to the port. */
+	list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2008 Error %d posting all rpi "
+					"headers\n", rc);
+			rc = -EIO;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_rpi_hdr - Post an rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi_page:  pointer to the rpi memory region.
+ *
+ * This routine is invoked to post a single rpi header to the
+ * HBA consistent with the SLI-4 interface spec.  This memory region
+ * maps up to 64 rpi context regions.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No available memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
+	uint32_t rc = 0;
+	uint32_t mbox_tmo;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2001 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Post all rpi memory regions to the port. */
+	hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
+			 sizeof(struct lpfc_mbx_post_hdr_tmpl) -
+			 sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+	       hdr_tmpl, rpi_page->page_count);
+	bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
+	       rpi_page->start_rpi);
+	hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
+	hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2514 POST_RPI_HDR mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_rpi - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ * 	A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * 	LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+int
+lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
+{
+	int rpi;
+	uint16_t max_rpi, rpi_base, rpi_limit;
+	uint16_t rpi_remaining;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+	rpi_base = phba->sli4_hba.max_cfg_param.rpi_base;
+	rpi_limit = phba->sli4_hba.next_rpi;
+
+	/*
+	 * The valid rpi range is not guaranteed to be zero-based.  Start
+	 * the search at the rpi_base as reported by the port.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base);
+	if (rpi >= rpi_limit || rpi < rpi_base)
+		rpi = LPFC_RPI_ALLOC_ERROR;
+	else {
+		set_bit(rpi, phba->sli4_hba.rpi_bmask);
+		phba->sli4_hba.max_cfg_param.rpi_used++;
+		phba->sli4_hba.rpi_count++;
+	}
+
+	/*
+	 * Don't try to allocate more rpi header regions if the device limit
+	 * on available rpis max has been exhausted.
+	 */
+	if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
+	    (phba->sli4_hba.rpi_count >= max_rpi)) {
+		spin_unlock_irq(&phba->hbalock);
+		return rpi;
+	}
+
+	/*
+	 * If the driver is running low on rpi resources, allocate another
+	 * page now.  Note that the next_rpi value is used because
+	 * it represents how many are actually in use whereas max_rpi notes
+	 * how many are supported max by the device.
+	 */
+	rpi_remaining = phba->sli4_hba.next_rpi - rpi_base -
+		phba->sli4_hba.rpi_count;
+	spin_unlock_irq(&phba->hbalock);
+	if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
+		rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+		if (!rpi_hdr) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2002 Error Could not grow rpi "
+					"count\n");
+		} else {
+			lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
+		}
+	}
+
+	return rpi;
+}
+
+/**
+ * lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+	spin_lock_irq(&phba->hbalock);
+	clear_bit(rpi, phba->sli4_hba.rpi_bmask);
+	phba->sli4_hba.rpi_count--;
+	phba->sli4_hba.max_cfg_param.rpi_used--;
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_remove_rpis - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+void
+lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.rpi_bmask);
+}
+
+/**
+ * lpfc_sli4_resume_rpi - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+int
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_hba *phba = ndlp->phba;
+	int rc;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/* Post all rpi memory regions to the port. */
+	lpfc_resume_rpi(mboxq, ndlp);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2010 Resume RPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_init_vpi - Initialize a vpi with the port
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: vpi value to activate with the port.
+ *
+ * This routine is invoked to activate a vpi with the
+ * port when the host intends to use vports with a
+ * nonzero vpi.
+ *
+ * Returns:
+ *    0 success
+ *    -Evalue otherwise
+ **/
+int
+lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int rc = 0;
+	uint32_t mbox_tmo;
+
+	if (vpi == 0)
+		return -EINVAL;
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+	lpfc_init_vpi(mboxq, vpi);
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+	rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2022 INIT VPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		rc = -EIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_mbx_cmpl_add_fcf_record - add fcf mbox completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+static void
+lpfc_mbx_cmpl_add_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t shdr_status, shdr_add_status;
+
+	virt_addr = mboxq->sge_array->addr[0];
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+	if ((shdr_status || shdr_add_status) &&
+		(shdr_status != STATUS_FCF_IN_USE))
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2558 ADD_FCF_RECORD mailbox failed with "
+			"status x%x add_status x%x\n",
+			shdr_status, shdr_add_status);
+
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
+ * lpfc_sli4_add_fcf_record - Manually add an FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the initialized fcf record to add.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+int
+lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	uint8_t *bytep;
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	uint32_t fcfindex;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2009 Failed to allocate mbox for ADD_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) + sizeof(union lpfc_sli4_cfg_shdr) +
+		  sizeof(uint32_t);
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+				     LPFC_MBOX_OPCODE_FCOE_ADD_FCF,
+				     req_len, LPFC_SLI4_MBX_NEMBED);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2523 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Get the first SGE entry from the non-embedded DMA memory.  This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2526 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+	/*
+	 * Configure the FCF record for FCFI 0.  This is the driver's
+	 * hardcoded default and gets used in nonFIP mode.
+	 */
+	fcfindex = bf_get(lpfc_fcf_record_fcf_index, fcf_record);
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(&fcfindex, bytep, sizeof(uint32_t));
+
+	/*
+	 * Copy the fcf_index and the FCF Record Data. The data starts after
+	 * the FCoE header plus word10. The data copy needs to be endian
+	 * correct.
+	 */
+	bytep += sizeof(uint32_t);
+	lpfc_sli_pcimem_bcopy(fcf_record, bytep, sizeof(struct fcf_record));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_add_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2515 ADD_FCF_RECORD mailbox failed with "
+			"status 0x%x\n", rc);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		rc = -EIO;
+	} else
+		rc = 0;
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_build_dflt_fcf_record - Build the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the fcf record to write the default data.
+ * @fcf_index: FCF table entry index.
+ *
+ * This routine is invoked to build the driver's default FCF record.  The
+ * values used are hardcoded.  This routine handles memory initialization.
+ *
+ **/
+void
+lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
+				struct fcf_record *fcf_record,
+				uint16_t fcf_index)
+{
+	memset(fcf_record, 0, sizeof(struct fcf_record));
+	fcf_record->max_rcv_size = LPFC_FCOE_MAX_RCV_SIZE;
+	fcf_record->fka_adv_period = LPFC_FCOE_FKA_ADV_PER;
+	fcf_record->fip_priority = LPFC_FCOE_FIP_PRIORITY;
+	bf_set(lpfc_fcf_record_mac_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_mac_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_mac_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_mac_3, fcf_record, LPFC_FCOE_FCF_MAC3);
+	bf_set(lpfc_fcf_record_mac_4, fcf_record, LPFC_FCOE_FCF_MAC4);
+	bf_set(lpfc_fcf_record_mac_5, fcf_record, LPFC_FCOE_FCF_MAC5);
+	bf_set(lpfc_fcf_record_fc_map_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+	bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
+	bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
+		LPFC_FCF_FPMA | LPFC_FCF_SPMA);
+	/* Set the VLAN bit map */
+	if (phba->valid_vlan) {
+		fcf_record->vlan_bitmap[phba->vlan_id / 8]
+			= 1 << (phba->vlan_id % 8);
+	}
+}
+
+/**
+ * lpfc_sli4_read_fcf_record - Read the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read up to @fcf_num of FCF record from the
+ * device starting with the given @fcf_index.
+ **/
+int
+lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2000 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) +
+		  sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+	/* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0291 Allocated DMA memory size (x%x) is "
+				"less than the requested DMA memory "
+				"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2527 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+	/* Set up command fields */
+	bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+	/* Perform necessary endian conversion */
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		error = -EIO;
+	} else
+		error = 0;
+	return error;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 883938652a6..7d37eb7459b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@ typedef enum _lpfc_ctx_cmd {
 	LPFC_CTX_HOST
 } lpfc_ctx_cmd;
 
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+	uint8_t hw_status;
+	uint8_t bfield;
+#define LPFC_XB	0x1
+#define LPFC_PV	0x2
+	uint8_t priority;
+	uint8_t reserved;
+};
+
 /* This structure is used to handle IOCB requests / responses */
 struct lpfc_iocbq {
 	/* lpfc_iocbqs are used in double linked lists */
 	struct list_head list;
 	struct list_head clist;
 	uint16_t iotag;         /* pre-assigned IO tag */
-	uint16_t rsvd1;
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 
 	IOCB_t iocb;		/* IOCB cmd */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@ struct lpfc_iocbq {
 			   struct lpfc_iocbq *);
 	void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
 			   struct lpfc_iocbq *);
-
+	struct lpfc_sli4_rspiocb_info sli4_info;
 };
 
 #define SLI_IOCB_RET_IOCB      1	/* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@ struct lpfc_iocbq {
 typedef struct lpfcMboxq {
 	/* MBOXQs are used in single linked lists */
 	struct list_head list;	/* ptr to next mailbox command */
-	MAILBOX_t mb;		/* Mailbox cmd */
-	struct lpfc_vport *vport;/* virutal port pointer */
+	union {
+		MAILBOX_t mb;		/* Mailbox cmd */
+		struct lpfc_mqe mqe;
+	} u;
+	struct lpfc_vport *vport;/* virtual port pointer */
 	void *context1;		/* caller context information */
 	void *context2;		/* caller context information */
 
 	void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
 	uint8_t mbox_flag;
-
+	struct lpfc_mcqe mcqe;
+	struct lpfc_mbx_nembed_sge_virt *sge_array;
 } LPFC_MBOXQ_t;
 
 #define MBX_POLL        1	/* poll mailbox till command done, then
@@ -230,10 +244,11 @@ struct lpfc_sli {
 
 	/* Additional sli_flags */
 #define LPFC_SLI_MBOX_ACTIVE      0x100	/* HBA mailbox is currently active */
-#define LPFC_SLI2_ACTIVE          0x200	/* SLI2 overlay in firmware is active */
+#define LPFC_SLI_ACTIVE           0x200	/* SLI in firmware is active */
 #define LPFC_PROCESS_LA           0x400	/* Able to process link attention */
 #define LPFC_BLOCK_MGMT_IO        0x800	/* Don't allow mgmt mbx or iocb cmds */
 #define LPFC_MENLO_MAINT          0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK    0x2000 /* Async mailbox is blocked */
 
 	struct lpfc_sli_ring ring[LPFC_MAX_RING];
 	int fcp_ring;		/* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@ struct lpfc_sli {
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60	/* Sec tmo for outstanding mbox
+					   command */
 #define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
 					 * or erase cmds. This is especially
 					 * long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 00000000000..5196b46608d
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT               100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL	32
+#define LPFC_GET_QE_REL_INT			32
+#define LPFC_RPI_LOW_WATER_MARK			10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT		254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX       8
+#define LPFC_SP_EQN_DEF       1
+#define LPFC_FP_EQN_DEF       1
+#define LPFC_FP_EQN_MIN       1
+#define LPFC_FP_EQN_MAX       (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX       32
+#define LPFC_SP_WQN_DEF       1
+#define LPFC_FP_WQN_DEF       4
+#define LPFC_FP_WQN_MIN       1
+#define LPFC_FP_WQN_MAX       (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX	0
+#define LPFC_FCOE_FCF_GET_FIRST	0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE	0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3	0xFF
+#define LPFC_FCOE_FCF_MAC4	0xFF
+#define LPFC_FCOE_FCF_MAC5	0xFE
+#define LPFC_FCOE_FCF_MAP0	0x0E
+#define LPFC_FCOE_FCF_MAP1	0xFC
+#define LPFC_FCOE_FCF_MAP2	0x00
+#define LPFC_FCOE_MAX_RCV_SIZE	0x5AC
+#define LPFC_FCOE_FKA_ADV_PER	0
+#define LPFC_FCOE_FIP_PRIORITY	0x80
+
+enum lpfc_sli4_queue_type {
+	LPFC_EQ,
+	LPFC_GCQ,
+	LPFC_MCQ,
+	LPFC_WCQ,
+	LPFC_RCQ,
+	LPFC_MQ,
+	LPFC_WQ,
+	LPFC_HRQ,
+	LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+	LPFC_NONE,
+	LPFC_MBOX,
+	LPFC_FCP,
+	LPFC_ELS,
+	LPFC_USOL
+};
+
+union sli4_qe {
+	void *address;
+	struct lpfc_eqe *eqe;
+	struct lpfc_cqe *cqe;
+	struct lpfc_mcqe *mcqe;
+	struct lpfc_wcqe_complete *wcqe_complete;
+	struct lpfc_wcqe_release *wcqe_release;
+	struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+	struct lpfc_rcqe_complete *rcqe_complete;
+	struct lpfc_mqe *mqe;
+	union  lpfc_wqe *wqe;
+	struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+	struct list_head list;
+	enum lpfc_sli4_queue_type type;
+	enum lpfc_sli4_queue_subtype subtype;
+	struct lpfc_hba *phba;
+	struct list_head child_list;
+	uint32_t entry_count;	/* Number of entries to support on the queue */
+	uint32_t entry_size;	/* Size of each queue entry. */
+	uint32_t queue_id;	/* Queue ID assigned by the hardware */
+	struct list_head page_list;
+	uint32_t page_count;	/* Number of pages allocated for this queue */
+
+	uint32_t host_index;	/* The host's index for putting or getting */
+	uint32_t hba_index;	/* The last known hba index for get or put */
+	union sli4_qe qe[1];	/* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+	struct list_head list;
+	union {
+		struct lpfc_mcqe		mcqe_cmpl;
+		struct lpfc_acqe_link		acqe_link;
+		struct lpfc_acqe_fcoe		acqe_fcoe;
+		struct lpfc_acqe_dcbx		acqe_dcbx;
+		struct lpfc_rcqe		rcqe_cmpl;
+		struct sli4_wcqe_xri_aborted	wcqe_axri;
+	} cqe;
+};
+
+struct lpfc_sli4_link {
+	uint8_t speed;
+	uint8_t duplex;
+	uint8_t status;
+	uint8_t physical;
+	uint8_t fault;
+};
+
+struct lpfc_fcf {
+	uint8_t	 fabric_name[8];
+	uint8_t  mac_addr[6];
+	uint16_t fcf_indx;
+	uint16_t fcfi;
+	uint32_t fcf_flag;
+#define FCF_AVAILABLE	0x01 /* FCF available for discovery */
+#define FCF_REGISTERED	0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED	0x04 /* FCF discovery started  */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE	0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN	0x20 /* Use the vlan id specified */
+	uint32_t priority;
+	uint32_t addr_mode;
+	uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION	1
+#define LPFC_REGION23_LAST_REC  0xff
+struct lpfc_fip_param_hdr {
+	uint8_t type;
+#define FCOE_PARAM_TYPE		0xA0
+	uint8_t length;
+#define FCOE_PARAM_LENGTH	2
+	uint8_t parm_version;
+#define FIPP_VERSION		0x01
+	uint8_t parm_flags;
+#define	lpfc_fip_param_hdr_fipp_mode_SHIFT	6
+#define	lpfc_fip_param_hdr_fipp_mode_MASK	0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD	parm_flags
+#define	FIPP_MODE_ON				0x2
+#define	FIPP_MODE_OFF				0x0
+#define FIPP_VLAN_VALID				0x1
+};
+
+struct lpfc_fcoe_params {
+	uint8_t fc_map[3];
+	uint8_t reserved1;
+	uint16_t vlan_tag;
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+	uint8_t type;
+#define FCOE_CONN_TBL_TYPE		0xA1
+	uint8_t length;   /* words */
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+	uint16_t flags;
+#define	FCFCNCT_VALID		0x0001
+#define	FCFCNCT_BOOT		0x0002
+#define	FCFCNCT_PRIMARY		0x0004   /* if not set, Secondary */
+#define	FCFCNCT_FBNM_VALID	0x0008
+#define	FCFCNCT_SWNM_VALID	0x0010
+#define	FCFCNCT_VLAN_VALID	0x0020
+#define	FCFCNCT_AM_VALID	0x0040
+#define	FCFCNCT_AM_PREFERRED	0x0080   /* if not set, AM Required */
+#define	FCFCNCT_AM_SPMA		0x0100	 /* if not set, FPMA */
+
+	uint16_t vlan_tag;
+	uint8_t fabric_name[8];
+	uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+	struct list_head list;
+	struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox.  This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address dma_address;
+	void *avirt;
+	dma_addr_t aphys;
+	uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 	4
+#define LPFC_EQE_SIZE_16B	16
+#define LPFC_CQE_SIZE		16
+#define LPFC_WQE_SIZE		64
+#define LPFC_MQE_SIZE		256
+#define LPFC_RQE_SIZE		8
+
+#define LPFC_EQE_DEF_COUNT	1024
+#define LPFC_CQE_DEF_COUNT      256
+#define LPFC_WQE_DEF_COUNT      64
+#define LPFC_MQE_DEF_COUNT      16
+#define LPFC_RQE_DEF_COUNT	512
+
+#define LPFC_QUEUE_NOARM	false
+#define LPFC_QUEUE_REARM	true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+	uint16_t max_xri;
+	uint16_t xri_base;
+	uint16_t xri_used;
+	uint16_t max_rpi;
+	uint16_t rpi_base;
+	uint16_t rpi_used;
+	uint16_t max_vpi;
+	uint16_t vpi_base;
+	uint16_t vpi_used;
+	uint16_t max_vfi;
+	uint16_t vfi_base;
+	uint16_t vfi_used;
+	uint16_t max_fcfi;
+	uint16_t fcfi_base;
+	uint16_t fcfi_used;
+	uint16_t max_eq;
+	uint16_t max_rq;
+	uint16_t max_cq;
+	uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+	uint32_t idx;
+	struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+	void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR0, config space registers */
+	void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR1, control registers */
+	void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR2, doorbell registers */
+	/* BAR0 PCI config space register memory map */
+	void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+	void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+	void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+	void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR	0xFFFFFFFF
+	void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+	/* BAR1 FCoE function CSR register memory map */
+	void __iomem *STAregaddr;    /* Address to HST_STATE register */
+	void __iomem *ISRregaddr;    /* Address to HST_ISR register */
+	void __iomem *IMRregaddr;    /* Address to HST_IMR register */
+	void __iomem *ISCRregaddr;   /* Address to HST_ISCR register */
+	/* BAR2 VF-0 doorbell register memory map */
+	void __iomem *RQDBregaddr;   /* Address to RQ_DOORBELL register */
+	void __iomem *WQDBregaddr;   /* Address to WQ_DOORBELL register */
+	void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+	void __iomem *MQDBregaddr;   /* Address to MQ_DOORBELL register */
+	void __iomem *BMBXregaddr;   /* Address to BootStrap MBX register */
+
+	struct msix_entry *msix_entries;
+	uint32_t cfg_eqn;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+	/* Pointers to the constructed SLI4 queues */
+	struct lpfc_queue **fp_eq; /* Fast-path event queue */
+	struct lpfc_queue *sp_eq;  /* Slow-path event queue */
+	struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+	struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+	struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+	struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+	struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+	struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+	struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+	struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+	struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+	/* Setup information for various queue parameters */
+	int eq_esize;
+	int eq_ecount;
+	int cq_esize;
+	int cq_ecount;
+	int wq_esize;
+	int wq_ecount;
+	int mq_esize;
+	int mq_ecount;
+	int rq_esize;
+	int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC         10000
+#define LPFC_FP_EQ_MAX_INTR_SEC         10000
+
+	uint32_t intr_enable;
+	struct lpfc_bmbx bmbx;
+	struct lpfc_max_cfg_param max_cfg_param;
+	uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+	uint16_t next_rpi;
+	uint16_t scsi_xri_max;
+	uint16_t scsi_xri_cnt;
+	struct list_head lpfc_free_sgl_list;
+	struct list_head lpfc_sgl_list;
+	struct lpfc_sglq **lpfc_els_sgl_array;
+	struct list_head lpfc_abts_els_sgl_list;
+	struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+	struct list_head lpfc_abts_scsi_buf_list;
+	uint32_t total_sglq_bufs;
+	struct lpfc_sglq **lpfc_sglq_active_list;
+	struct list_head lpfc_rpi_hdr_list;
+	unsigned long *rpi_bmask;
+	uint16_t rpi_count;
+	struct lpfc_sli4_flags sli4_flags;
+	struct list_head sp_rspiocb_work_queue;
+	struct list_head sp_cqe_event_pool;
+	struct list_head sp_asynce_work_queue;
+	struct list_head sp_fcp_xri_aborted_work_queue;
+	struct list_head sp_els_xri_aborted_work_queue;
+	struct list_head sp_unsol_work_queue;
+	struct lpfc_sli4_link link_state;
+	spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+	spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+	GEN_BUFF_TYPE,
+	SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+	/* lpfc_sglqs are used in double linked lists */
+	struct list_head list;
+	struct list_head clist;
+	enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+	uint16_t iotag;         /* pre-assigned IO tag */
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
+	struct sli4_sge *sgl;	/* pre-assigned SGL */
+	void *virt;		/* virtual address. */
+	dma_addr_t phys;	/* physical address */
+};
+
+struct lpfc_rpi_hdr {
+	struct list_head list;
+	uint32_t len;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t page_count;
+	uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+		     uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+			   struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+			uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+			 struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index e599519e307..6b8a148f0a5 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.1"
+#define LPFC_DRIVER_VERSION "8.3.2"
 
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56b0af..a6313ee84ac 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -89,6 +91,8 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
 		vpi = 0;
 	else
 		set_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used++;
 	spin_unlock_irq(&phba->hbalock);
 	return vpi;
 }
@@ -96,8 +100,12 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
 static void
 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
 {
+	if (vpi == 0)
+		return;
 	spin_lock_irq(&phba->hbalock);
 	clear_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used--;
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -113,7 +121,7 @@ lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	if (!pmb) {
 		return -ENOMEM;
 	}
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	lpfc_read_sparam(phba, pmb, vport->vpi);
 	/*
@@ -243,23 +251,22 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
 		    (vport->fc_flag & wait_flags)  ||
 		    ((vport->port_state > LPFC_VPORT_FAILED) &&
 		     (vport->port_state < LPFC_VPORT_READY))) {
-			lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 					"1833 Vport discovery quiesce Wait:"
-					" vpi x%x state x%x fc_flags x%x"
+					" state x%x fc_flags x%x"
 					" num_nodes x%x, waiting 1000 msecs"
 					" total wait msecs x%x\n",
-					vport->vpi, vport->port_state,
-					vport->fc_flag, vport->num_disc_nodes,
+					vport->port_state, vport->fc_flag,
+					vport->num_disc_nodes,
 					jiffies_to_msecs(jiffies - start_time));
 			msleep(1000);
 		} else {
 			/* Base case.  Wait variants satisfied.  Break out */
-			lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 					 "1834 Vport discovery quiesced:"
-					 " vpi x%x state x%x fc_flags x%x"
+					 " state x%x fc_flags x%x"
 					 " wait msecs x%x\n",
-					 vport->vpi, vport->port_state,
-					 vport->fc_flag,
+					 vport->port_state, vport->fc_flag,
 					 jiffies_to_msecs(jiffies
 						- start_time));
 			break;
@@ -267,12 +274,10 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
 	}
 
 	if (time_after(jiffies, wait_time_max))
-		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 				"1835 Vport discovery quiesce failed:"
-				" vpi x%x state x%x fc_flags x%x"
-				" wait msecs x%x\n",
-				vport->vpi, vport->port_state,
-				vport->fc_flag,
+				" state x%x fc_flags x%x wait msecs x%x\n",
+				vport->port_state, vport->fc_flag,
 				jiffies_to_msecs(jiffies - start_time));
 }
 
@@ -308,6 +313,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 		goto error_out;
 	}
 
+	/*
+	 * In SLI4, the vpi must be activated before it can be used
+	 * by the port.
+	 */
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_init_vpi(phba, vpi);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+					"1838 Failed to INIT_VPI on vpi %d "
+					"status %d\n", vpi, rc);
+			rc = VPORT_NORESOURCES;
+			lpfc_free_vpi(phba, vpi);
+			goto error_out;
+		}
+	}
 
 	/* Assign an unused board number */
 	if ((instance = lpfc_get_instance()) < 0) {
@@ -535,6 +555,16 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 				 "physical host\n");
 		return VPORT_ERROR;
 	}
+
+	/* If the vport is a static vport fail the deletion. */
+	if ((vport->vport_flag & STATIC_VPORT) &&
+		!(phba->pport->load_flag & FC_UNLOADING)) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1837 vport_delete failed: Cannot delete "
+				 "static vport.\n");
+		return VPORT_ERROR;
+	}
+
 	/*
 	 * If we are not unloading the driver then prevent the vport_delete
 	 * from happening until after this vport's discovery is finished.
@@ -710,7 +740,7 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba)
 	struct lpfc_vport *port_iterator;
 	struct lpfc_vport **vports;
 	int index = 0;
-	vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
+	vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
 			 GFP_KERNEL);
 	if (vports == NULL)
 		return NULL;
@@ -734,7 +764,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
 	int i;
 	if (vports == NULL)
 		return;
-	for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
+	for (i = 0; vports[i] != NULL && i <= phba->max_vports; i++)
 		scsi_host_put(lpfc_shost_from_vport(vports[i]));
 	kfree(vports);
 }
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 795201fa0b4..512c2cc1a33 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -469,7 +469,7 @@ typedef struct {
 	u8	type;		/* Type of the device */
 	u8	cur_status;	/* current status of the device */
 	u8	tag_depth;	/* Level of tagging */
-	u8	sync_neg;	/* sync negotiation - ENABLE or DISBALE */
+	u8	sync_neg;	/* sync negotiation - ENABLE or DISABLE */
 	u32	size;		/* configurable size in terms of 512 byte
 				   blocks */
 }__attribute__ ((packed)) phys_drv;
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index 170399ef06f..b25b74764ec 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -686,7 +686,7 @@ typedef struct {
  * @type	: Type of the device
  * @cur_status	: current status of the device
  * @tag_depth	: Level of tagging
- * @sync_neg	: sync negotiation - ENABLE or DISBALE
+ * @sync_neg	: sync negotiation - ENABLE or DISABLE
  * @size	: configurable size in terms of 512 byte
  */
 typedef struct {
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 36b1d1052ba..286c185fa9e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -61,6 +61,7 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_sas.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
 
 #include "mpt2sas_debug.h"
 
@@ -68,10 +69,10 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"01.100.02.00"
+#define MPT2SAS_DRIVER_VERSION		"01.100.03.00"
 #define MPT2SAS_MAJOR_VERSION		01
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		02
+#define MPT2SAS_BUILD_VERSION		03
 #define MPT2SAS_RELEASE_VERSION		00
 
 /*
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index ba6ab170bdf..14e473d1fa7 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -473,7 +473,7 @@ _ctl_poll(struct file *filep, poll_table *wait)
 }
 
 /**
- * _ctl_do_task_abort - assign an active smid to the abort_task
+ * _ctl_set_task_mid - assign an active smid to tm request
  * @ioc: per adapter object
  * @karg - (struct mpt2_ioctl_command)
  * @tm_request - pointer to mf from user space
@@ -482,7 +482,7 @@ _ctl_poll(struct file *filep, poll_table *wait)
  * during failure, the reply frame is filled.
  */
 static int
-_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
+_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
     Mpi2SCSITaskManagementRequest_t *tm_request)
 {
 	u8 found = 0;
@@ -494,6 +494,14 @@ _ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 	Mpi2SCSITaskManagementReply_t *tm_reply;
 	u32 sz;
 	u32 lun;
+	char *desc = NULL;
+
+	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+		desc = "abort_task";
+	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+		desc = "query_task";
+	else
+		return 0;
 
 	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
 
@@ -517,13 +525,13 @@ _ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
 	if (!found) {
-		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
-		    "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
-		    tm_request->DevHandle, lun));
+		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
+		    desc, tm_request->DevHandle, lun));
 		tm_reply = ioc->ctl_cmds.reply;
 		tm_reply->DevHandle = tm_request->DevHandle;
 		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-		tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
+		tm_reply->TaskType = tm_request->TaskType;
 		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
 		tm_reply->VP_ID = tm_request->VP_ID;
 		tm_reply->VF_ID = tm_request->VF_ID;
@@ -535,9 +543,9 @@ _ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 		return 1;
 	}
 
-	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
-	    "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name,
-	    tm_request->DevHandle, lun, tm_request->TaskMID));
+	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+	    "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
+	    desc, tm_request->DevHandle, lun, tm_request->TaskMID));
 	return 0;
 }
 
@@ -739,8 +747,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
 
 		if (tm_request->TaskType ==
-		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+		    tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
+			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
 				mpt2sas_base_free_smid(ioc, smid);
 				goto out;
 			}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index e3a7967259e..2a01a5f2a84 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -197,12 +197,12 @@ static struct pci_device_id scsih_pci_table[] = {
 MODULE_DEVICE_TABLE(pci, scsih_pci_table);
 
 /**
- * scsih_set_debug_level - global setting of ioc->logging_level.
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
  *
  * Note: The logging levels are defined in mpt2sas_debug.h.
  */
 static int
-scsih_set_debug_level(const char *val, struct kernel_param *kp)
+_scsih_set_debug_level(const char *val, struct kernel_param *kp)
 {
 	int ret = param_set_int(val, kp);
 	struct MPT2SAS_ADAPTER *ioc;
@@ -215,7 +215,7 @@ scsih_set_debug_level(const char *val, struct kernel_param *kp)
 		ioc->logging_level = logging_level;
 	return 0;
 }
-module_param_call(logging_level, scsih_set_debug_level, param_get_int,
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
     &logging_level, 0644);
 
 /**
@@ -884,6 +884,41 @@ _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
 }
 
 /**
+ * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
+ * @ioc: per adapter object
+ * @id: target id
+ * @lun: lun number
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id:lun in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
+    unsigned int lun, int channel)
+{
+	u8 found;
+	unsigned long	flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	found = 0;
+	for (i = 0 ; i < ioc->request_depth; i++) {
+		if (ioc->scsi_lookup[i].scmd &&
+		    (ioc->scsi_lookup[i].scmd->device->id == id &&
+		    ioc->scsi_lookup[i].scmd->device->channel == channel &&
+		    ioc->scsi_lookup[i].scmd->device->lun == lun)) {
+			found = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return found;
+}
+
+/**
  * _scsih_get_chain_buffer_dma - obtain block of chains (dma address)
  * @ioc: per adapter object
  * @smid: system request message index
@@ -1047,14 +1082,14 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * scsih_change_queue_depth - setting device queue depth
+ * _scsih_change_queue_depth - setting device queue depth
  * @sdev: scsi device struct
  * @qdepth: requested queue depth
  *
  * Returns queue depth.
  */
 static int
-scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
 	struct Scsi_Host *shost = sdev->host;
 	int max_depth;
@@ -1079,14 +1114,14 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 }
 
 /**
- * scsih_change_queue_depth - changing device queue tag type
+ * _scsih_change_queue_depth - changing device queue tag type
  * @sdev: scsi device struct
  * @tag_type: requested tag type
  *
  * Returns queue tag type.
  */
 static int
-scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
+_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
 {
 	if (sdev->tagged_supported) {
 		scsi_set_tag_type(sdev, tag_type);
@@ -1101,14 +1136,14 @@ scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
 }
 
 /**
- * scsih_target_alloc - target add routine
+ * _scsih_target_alloc - target add routine
  * @starget: scsi target struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_target_alloc(struct scsi_target *starget)
+_scsih_target_alloc(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1163,13 +1198,13 @@ scsih_target_alloc(struct scsi_target *starget)
 }
 
 /**
- * scsih_target_destroy - target destroy routine
+ * _scsih_target_destroy - target destroy routine
  * @starget: scsi target struct
  *
  * Returns nothing.
  */
 static void
-scsih_target_destroy(struct scsi_target *starget)
+_scsih_target_destroy(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1212,14 +1247,14 @@ scsih_target_destroy(struct scsi_target *starget)
 }
 
 /**
- * scsih_slave_alloc - device add routine
+ * _scsih_slave_alloc - device add routine
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_alloc(struct scsi_device *sdev)
+_scsih_slave_alloc(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost;
 	struct MPT2SAS_ADAPTER *ioc;
@@ -1273,13 +1308,13 @@ scsih_slave_alloc(struct scsi_device *sdev)
 }
 
 /**
- * scsih_slave_destroy - device destroy routine
+ * _scsih_slave_destroy - device destroy routine
  * @sdev: scsi device struct
  *
  * Returns nothing.
  */
 static void
-scsih_slave_destroy(struct scsi_device *sdev)
+_scsih_slave_destroy(struct scsi_device *sdev)
 {
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct scsi_target *starget;
@@ -1295,13 +1330,13 @@ scsih_slave_destroy(struct scsi_device *sdev)
 }
 
 /**
- * scsih_display_sata_capabilities - sata capabilities
+ * _scsih_display_sata_capabilities - sata capabilities
  * @ioc: per adapter object
  * @sas_device: the sas_device object
  * @sdev: scsi device struct
  */
 static void
-scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
+_scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
     struct _sas_device *sas_device, struct scsi_device *sdev)
 {
 	Mpi2ConfigReply_t mpi_reply;
@@ -1401,14 +1436,14 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * scsih_slave_configure - device configure routine.
+ * _scsih_slave_configure - device configure routine.
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_configure(struct scsi_device *sdev)
+_scsih_slave_configure(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost = sdev->host;
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1489,7 +1524,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 		    r_level, raid_device->handle,
 		    (unsigned long long)raid_device->wwid,
 		    raid_device->num_pds, ds);
-		scsih_change_queue_depth(sdev, qdepth);
+		_scsih_change_queue_depth(sdev, qdepth);
 		return 0;
 	}
 
@@ -1532,10 +1567,10 @@ scsih_slave_configure(struct scsi_device *sdev)
 		    sas_device->slot);
 
 		if (!ssp_target)
-			scsih_display_sata_capabilities(ioc, sas_device, sdev);
+			_scsih_display_sata_capabilities(ioc, sas_device, sdev);
 	}
 
-	scsih_change_queue_depth(sdev, qdepth);
+	_scsih_change_queue_depth(sdev, qdepth);
 
 	if (ssp_target)
 		sas_read_port_mode_page(sdev);
@@ -1543,7 +1578,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 }
 
 /**
- * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * _scsih_bios_param - fetch head, sector, cylinder info for a disk
  * @sdev: scsi device struct
  * @bdev: pointer to block device context
  * @capacity: device size (in 512 byte sectors)
@@ -1555,7 +1590,7 @@ scsih_slave_configure(struct scsi_device *sdev)
  * Return nothing.
  */
 static int
-scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
     sector_t capacity, int params[])
 {
 	int		heads;
@@ -1636,7 +1671,7 @@ _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
 }
 
 /**
- * scsih_tm_done - tm completion routine
+ * _scsih_tm_done - tm completion routine
  * @ioc: per adapter object
  * @smid: system request message index
  * @VF_ID: virtual function id
@@ -1648,7 +1683,7 @@ _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
  * Return nothing.
  */
 static void
-scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
@@ -1823,13 +1858,13 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 }
 
 /**
- * scsih_abort - eh threads main abort routine
+ * _scsih_abort - eh threads main abort routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_abort(struct scsi_cmnd *scmd)
+_scsih_abort(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1889,15 +1924,86 @@ scsih_abort(struct scsi_cmnd *scmd)
 	return r;
 }
 
+/**
+ * _scsih_dev_reset - eh threads main device reset routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT2SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u16	handle;
+	int r;
+
+	printk(MPT2SAS_INFO_FMT "attempting device reset! scmd(%p)\n",
+	    ioc->name, scmd);
+	scsi_print_command(scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+		    ioc->name, scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc,
+		   sas_device_priv_data->sas_target->handle);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	mpt2sas_scsih_issue_tm(ioc, handle, 0,
+	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, scmd->device->lun,
+	    30);
+
+	/*
+	 *  sanity check see whether all commands to this device been
+	 *  completed
+	 */
+	if (_scsih_scsi_lookup_find_by_lun(ioc, scmd->device->id,
+	    scmd->device->lun, scmd->device->channel))
+		r = FAILED;
+	else
+		r = SUCCESS;
+	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+	mutex_unlock(&ioc->tm_cmds.mutex);
+
+ out:
+	printk(MPT2SAS_INFO_FMT "device reset: %s scmd(%p)\n",
+	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	return r;
+}
 
 /**
- * scsih_dev_reset - eh threads main device reset routine
+ * _scsih_target_reset - eh threads main target reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_dev_reset(struct scsi_cmnd *scmd)
+_scsih_target_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1912,7 +2018,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 
 	sas_device_priv_data = scmd->device->hostdata;
 	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+		printk(MPT2SAS_INFO_FMT "target been deleted! scmd(%p)\n",
 		    ioc->name, scmd);
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
@@ -1962,13 +2068,13 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 }
 
 /**
- * scsih_abort - eh threads main host reset routine
+ * _scsih_abort - eh threads main host reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_host_reset(struct scsi_cmnd *scmd)
+_scsih_host_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	int r, retval;
@@ -2390,7 +2496,107 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 }
 
 /**
- * scsih_qcmd - main scsi request entry point
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ *
+ * Supporting protection 1 and 3.
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
+{
+	u16 eedp_flags;
+	unsigned char prot_op = scsi_get_prot_op(scmd);
+	unsigned char prot_type = scsi_get_prot_type(scmd);
+
+	if (prot_type == SCSI_PROT_DIF_TYPE0 ||
+	   prot_type == SCSI_PROT_DIF_TYPE2 ||
+	   prot_op == SCSI_PROT_NORMAL)
+		return;
+
+	if (prot_op ==  SCSI_PROT_READ_STRIP)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+	else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+	else
+		return;
+
+	mpi_request->EEDPBlockSize = scmd->device->sector_size;
+
+	switch (prot_type) {
+	case SCSI_PROT_DIF_TYPE1:
+
+		/*
+		* enable ref/guard checking
+		* auto increment ref tag
+		*/
+		mpi_request->EEDPFlags = eedp_flags |
+		    MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+		    cpu_to_be32(scsi_get_lba(scmd));
+
+		break;
+
+	case SCSI_PROT_DIF_TYPE3:
+
+		/*
+		* enable guard checking
+		*/
+		mpi_request->EEDPFlags = eedp_flags |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+		break;
+	}
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ *
+ * Returns nothing
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+	u8 ascq;
+	u8 sk;
+	u8 host_byte;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		ascq = 0x01;
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		ascq = 0x02;
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		ascq = 0x03;
+		break;
+	default:
+		ascq = 0x00;
+		break;
+	}
+
+	if (scmd->sc_data_direction == DMA_TO_DEVICE) {
+		sk = ILLEGAL_REQUEST;
+		host_byte = DID_ABORT;
+	} else {
+		sk = ABORTED_COMMAND;
+		host_byte = DID_OK;
+	}
+
+	scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq);
+	scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) |
+	    SAM_STAT_CHECK_CONDITION;
+}
+
+/**
+ * _scsih_qcmd - main scsi request entry point
  * @scmd: pointer to scsi command object
  * @done: function pointer to be invoked on completion
  *
@@ -2401,7 +2607,7 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
 static int
-scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -2470,6 +2676,7 @@ scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	}
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 	memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+	_scsih_setup_eedp(scmd, mpi_request);
 	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
 	if (sas_device_priv_data->sas_target->flags &
 	    MPT_TARGET_FLAGS_RAID_COMPONENT)
@@ -2604,6 +2811,15 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
 		desc_ioc_state = "scsi ext terminated";
 		break;
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc_ioc_state = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc_ioc_state = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc_ioc_state = "eedp app tag error";
+		break;
 	default:
 		desc_ioc_state = "unknown";
 		break;
@@ -2783,7 +2999,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 }
 
 /**
- * scsih_io_done - scsi request callback
+ * _scsih_io_done - scsi request callback
  * @ioc: per adapter object
  * @smid: system request message index
  * @VF_ID: virtual function id
@@ -2794,7 +3010,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * Return nothing.
  */
 static void
-scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 {
 	Mpi2SCSIIORequest_t *mpi_request;
 	Mpi2SCSIIOReply_t *mpi_reply;
@@ -2939,6 +3155,11 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 			scmd->result = DID_RESET << 16;
 		break;
 
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		_scsih_eedp_error_handling(scmd, ioc_status);
+		break;
 	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
 	case MPI2_IOCSTATUS_INVALID_FUNCTION:
 	case MPI2_IOCSTATUS_INVALID_SGL:
@@ -5130,18 +5351,19 @@ static struct scsi_host_template scsih_driver_template = {
 	.module				= THIS_MODULE,
 	.name				= "Fusion MPT SAS Host",
 	.proc_name			= MPT2SAS_DRIVER_NAME,
-	.queuecommand			= scsih_qcmd,
-	.target_alloc			= scsih_target_alloc,
-	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
-	.target_destroy			= scsih_target_destroy,
-	.slave_destroy			= scsih_slave_destroy,
-	.change_queue_depth 		= scsih_change_queue_depth,
-	.change_queue_type		= scsih_change_queue_type,
-	.eh_abort_handler		= scsih_abort,
-	.eh_device_reset_handler	= scsih_dev_reset,
-	.eh_host_reset_handler		= scsih_host_reset,
-	.bios_param			= scsih_bios_param,
+	.queuecommand			= _scsih_qcmd,
+	.target_alloc			= _scsih_target_alloc,
+	.slave_alloc			= _scsih_slave_alloc,
+	.slave_configure		= _scsih_slave_configure,
+	.target_destroy			= _scsih_target_destroy,
+	.slave_destroy			= _scsih_slave_destroy,
+	.change_queue_depth 		= _scsih_change_queue_depth,
+	.change_queue_type		= _scsih_change_queue_type,
+	.eh_abort_handler		= _scsih_abort,
+	.eh_device_reset_handler	= _scsih_dev_reset,
+	.eh_target_reset_handler	= _scsih_target_reset,
+	.eh_host_reset_handler		= _scsih_host_reset,
+	.bios_param			= _scsih_bios_param,
 	.can_queue			= 1,
 	.this_id			= -1,
 	.sg_tablesize			= MPT2SAS_SG_DEPTH,
@@ -5228,13 +5450,13 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * scsih_remove - detach and remove add host
+ * _scsih_remove - detach and remove add host
  * @pdev: PCI device struct
  *
  * Return nothing.
  */
 static void __devexit
-scsih_remove(struct pci_dev *pdev)
+_scsih_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5442,14 +5664,14 @@ _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
- * scsih_probe - attach and add scsi host
+ * _scsih_probe - attach and add scsi host
  * @pdev: PCI device struct
  * @id: pci device id
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct MPT2SAS_ADAPTER *ioc;
 	struct Scsi_Host *shost;
@@ -5503,6 +5725,9 @@ scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_add_shost_fail;
 	}
 
+	scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+	    | SHOST_DIF_TYPE3_PROTECTION);
+
 	/* event thread */
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
 	    "fw_event%d", ioc->id);
@@ -5536,14 +5761,14 @@ scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 #ifdef CONFIG_PM
 /**
- * scsih_suspend - power management suspend main entry point
+ * _scsih_suspend - power management suspend main entry point
  * @pdev: PCI device struct
  * @state: PM state change to (usually PCI_D3)
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5564,13 +5789,13 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 }
 
 /**
- * scsih_resume - power management resume main entry point
+ * _scsih_resume - power management resume main entry point
  * @pdev: PCI device struct
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_resume(struct pci_dev *pdev)
+_scsih_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5599,22 +5824,22 @@ scsih_resume(struct pci_dev *pdev)
 static struct pci_driver scsih_driver = {
 	.name		= MPT2SAS_DRIVER_NAME,
 	.id_table	= scsih_pci_table,
-	.probe		= scsih_probe,
-	.remove		= __devexit_p(scsih_remove),
+	.probe		= _scsih_probe,
+	.remove		= __devexit_p(_scsih_remove),
 #ifdef CONFIG_PM
-	.suspend	= scsih_suspend,
-	.resume		= scsih_resume,
+	.suspend	= _scsih_suspend,
+	.resume		= _scsih_resume,
 #endif
 };
 
 
 /**
- * scsih_init - main entry point for this driver.
+ * _scsih_init - main entry point for this driver.
  *
  * Returns 0 success, anything else error.
  */
 static int __init
-scsih_init(void)
+_scsih_init(void)
 {
 	int error;
 
@@ -5630,10 +5855,10 @@ scsih_init(void)
 	mpt2sas_base_initialize_callback_handler();
 
 	 /* queuecommand callback hander */
-	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done);
+	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
 
 	/* task managment callback handler */
-	tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done);
+	tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
 
 	/* base internal commands callback handler */
 	base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
@@ -5659,12 +5884,12 @@ scsih_init(void)
 }
 
 /**
- * scsih_exit - exit point for this driver (when it is a module).
+ * _scsih_exit - exit point for this driver (when it is a module).
  *
  * Returns 0 success, anything else error.
  */
 static void __exit
-scsih_exit(void)
+_scsih_exit(void)
 {
 	printk(KERN_INFO "mpt2sas version %s unloading\n",
 	    MPT2SAS_DRIVER_VERSION);
@@ -5682,5 +5907,5 @@ scsih_exit(void)
 	mpt2sas_ctl_exit();
 }
 
-module_init(scsih_init);
-module_exit(scsih_exit);
+module_init(_scsih_init);
+module_exit(_scsih_exit);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 5c65da519e3..686695b155c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -264,7 +264,7 @@ struct rep_manu_reply{
 };
 
 /**
- * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
  * @ioc: per adapter object
  * @sas_address: expander sas address
  * @edev: the sas_expander_device object
@@ -274,7 +274,7 @@ struct rep_manu_reply{
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
+_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
     u64 sas_address, struct sas_expander_device *edev)
 {
 	Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -578,7 +578,7 @@ mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
 	    mpt2sas_port->remote_identify.device_type ==
 	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
-		transport_expander_report_manufacture(ioc,
+		_transport_expander_report_manufacture(ioc,
 		    mpt2sas_port->remote_identify.sas_address,
 		    rphy_to_expander_device(rphy));
 
@@ -852,7 +852,7 @@ rphy_to_ioc(struct sas_rphy *rphy)
 }
 
 /**
- * transport_get_linkerrors -
+ * _transport_get_linkerrors -
  * @phy: The sas phy object
  *
  * Only support sas_host direct attached phys.
@@ -860,7 +860,7 @@ rphy_to_ioc(struct sas_rphy *rphy)
  *
  */
 static int
-transport_get_linkerrors(struct sas_phy *phy)
+_transport_get_linkerrors(struct sas_phy *phy)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -903,14 +903,14 @@ transport_get_linkerrors(struct sas_phy *phy)
 }
 
 /**
- * transport_get_enclosure_identifier -
+ * _transport_get_enclosure_identifier -
  * @phy: The sas phy object
  *
  * Obtain the enclosure logical id for an expander.
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_node *sas_expander;
@@ -929,13 +929,13 @@ transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 }
 
 /**
- * transport_get_bay_identifier -
+ * _transport_get_bay_identifier -
  * @phy: The sas phy object
  *
  * Returns the slot id for a device that resides inside an enclosure.
  */
 static int
-transport_get_bay_identifier(struct sas_rphy *rphy)
+_transport_get_bay_identifier(struct sas_rphy *rphy)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_device *sas_device;
@@ -953,7 +953,7 @@ transport_get_bay_identifier(struct sas_rphy *rphy)
 }
 
 /**
- * transport_phy_reset -
+ * _transport_phy_reset -
  * @phy: The sas phy object
  * @hard_reset:
  *
@@ -961,7 +961,7 @@ transport_get_bay_identifier(struct sas_rphy *rphy)
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_phy_reset(struct sas_phy *phy, int hard_reset)
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -1002,7 +1002,7 @@ transport_phy_reset(struct sas_phy *phy, int hard_reset)
 }
 
 /**
- * transport_smp_handler - transport portal for smp passthru
+ * _transport_smp_handler - transport portal for smp passthru
  * @shost: shost object
  * @rphy: sas transport rphy object
  * @req:
@@ -1012,7 +1012,7 @@ transport_phy_reset(struct sas_phy *phy, int hard_reset)
  *           smp_rep_general /sys/class/bsg/expander-5:0
  */
 static int
-transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
     struct request *req)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1200,11 +1200,11 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 }
 
 struct sas_function_template mpt2sas_transport_functions = {
-	.get_linkerrors		= transport_get_linkerrors,
-	.get_enclosure_identifier = transport_get_enclosure_identifier,
-	.get_bay_identifier	= transport_get_bay_identifier,
-	.phy_reset		= transport_phy_reset,
-	.smp_handler		= transport_smp_handler,
+	.get_linkerrors		= _transport_get_linkerrors,
+	.get_enclosure_identifier = _transport_get_enclosure_identifier,
+	.get_bay_identifier	= _transport_get_bay_identifier,
+	.phy_reset		= _transport_phy_reset,
+	.smp_handler		= _transport_smp_handler,
 };
 
 struct scsi_transport_template *mpt2sas_transport_template;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
deleted file mode 100644
index e4acebd10d1..00000000000
--- a/drivers/scsi/mvsas.c
+++ /dev/null
@@ -1,3222 +0,0 @@
-/*
-	mvsas.c - Marvell 88SE6440 SAS/SATA support
-
-	Copyright 2007 Red Hat, Inc.
-	Copyright 2008 Marvell. <kewei@marvell.com>
-
-	This program is free software; you can redistribute it and/or
-	modify it under the terms of the GNU General Public License as
-	published by the Free Software Foundation; either version 2,
-	or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty
-	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-	See the GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public
-	License along with this program; see the file COPYING.	If not,
-	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
-	MA 02139, USA.
-
-	---------------------------------------------------------------
-
-	Random notes:
-	* hardware supports controlling the endian-ness of data
-	  structures.  this permits elimination of all the le32_to_cpu()
-	  and cpu_to_le32() conversions.
-
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <scsi/libsas.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/sas_ata.h>
-#include <asm/io.h>
-
-#define DRV_NAME	"mvsas"
-#define DRV_VERSION	"0.5.2"
-#define _MV_DUMP	0
-#define MVS_DISABLE_NVRAM
-#define MVS_DISABLE_MSI
-
-#define mr32(reg)	readl(regs + MVS_##reg)
-#define mw32(reg,val)	writel((val), regs + MVS_##reg)
-#define mw32_f(reg,val)	do {			\
-	writel((val), regs + MVS_##reg);	\
-	readl(regs + MVS_##reg);		\
-	} while (0)
-
-#define MVS_ID_NOT_MAPPED	0x7f
-#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
-
-/* offset for D2H FIS in the Received FIS List Structure */
-#define SATA_RECEIVED_D2H_FIS(reg_set)	\
-	((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x40)
-#define SATA_RECEIVED_PIO_FIS(reg_set)	\
-	((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x20)
-#define UNASSOC_D2H_FIS(id)		\
-	((void *) mvi->rx_fis + 0x100 * id)
-
-#define for_each_phy(__lseq_mask, __mc, __lseq, __rest)			\
-	for ((__mc) = (__lseq_mask), (__lseq) = 0;			\
-					(__mc) != 0 && __rest;		\
-					(++__lseq), (__mc) >>= 1)
-
-/* driver compile-time configuration */
-enum driver_configuration {
-	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
-	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
-					/* software requires power-of-2
-					   ring size */
-
-	MVS_SLOTS		= 512,	/* command slots */
-	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
-	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
-	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
-	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
-
-	MVS_RX_FIS_COUNT	= 17,	/* Optional rx'd FISs (max 17) */
-
-	MVS_QUEUE_SIZE		= 30,	/* Support Queue depth */
-	MVS_CAN_QUEUE		= MVS_SLOTS - 1,	/* SCSI Queue depth */
-};
-
-/* unchangeable hardware details */
-enum hardware_details {
-	MVS_MAX_PHYS		= 8,	/* max. possible phys */
-	MVS_MAX_PORTS		= 8,	/* max. possible ports */
-	MVS_RX_FISL_SZ		= 0x400 + (MVS_RX_FIS_COUNT * 0x100),
-};
-
-/* peripheral registers (BAR2) */
-enum peripheral_registers {
-	SPI_CTL			= 0x10,	/* EEPROM control */
-	SPI_CMD			= 0x14,	/* EEPROM command */
-	SPI_DATA		= 0x18, /* EEPROM data */
-};
-
-enum peripheral_register_bits {
-	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
-	TWSI_RD			= (1U << 4),	/* EEPROM read access */
-
-	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
-};
-
-/* enhanced mode registers (BAR4) */
-enum hw_registers {
-	MVS_GBL_CTL		= 0x04,  /* global control */
-	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
-	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
-	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
-
-	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
-	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
-	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
-	MVS_CMD_LIST_HI		= 0x10C,
-	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
-	MVS_RX_FIS_HI		= 0x114,
-
-	MVS_TX_CFG		= 0x120, /* TX configuration */
-	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
-	MVS_TX_HI		= 0x128,
-
-	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
-	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
-	MVS_RX_CFG		= 0x134, /* RX configuration */
-	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
-	MVS_RX_HI		= 0x13C,
-	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
-
-	MVS_INT_COAL		= 0x148, /* Int coalescing config */
-	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
-	MVS_INT_STAT		= 0x150, /* Central int status */
-	MVS_INT_MASK		= 0x154, /* Central int enable */
-	MVS_INT_STAT_SRS	= 0x158, /* SATA register set status */
-	MVS_INT_MASK_SRS	= 0x15C,
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
-	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
-	MVS_P4_INT_STAT		= 0x200, /* Port 4 interrupt status */
-	MVS_P4_INT_MASK		= 0x204, /* Port 4 interrupt enable mask */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
-	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
-
-	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
-	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
-	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
-	MVS_P4_CFG_ADDR		= 0x230, /* Port 4 config address */
-	MVS_P4_CFG_DATA		= 0x234, /* Port 4 config data */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
-	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
-	MVS_P4_VSR_ADDR		= 0x250, /* port 4 VSR addr */
-	MVS_P4_VSR_DATA		= 0x254, /* port 4 VSR data */
-};
-
-enum hw_register_bits {
-	/* MVS_GBL_CTL */
-	INT_EN			= (1U << 1),	/* Global int enable */
-	HBA_RST			= (1U << 0),	/* HBA reset */
-
-	/* MVS_GBL_INT_STAT */
-	INT_XOR			= (1U << 4),	/* XOR engine event */
-	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
-
-	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
-	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
-	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
-	MODE_AUTO_DET_PORT6 = (1U << 14),
-	MODE_AUTO_DET_PORT5 = (1U << 13),
-	MODE_AUTO_DET_PORT4 = (1U << 12),
-	MODE_AUTO_DET_PORT3 = (1U << 11),
-	MODE_AUTO_DET_PORT2 = (1U << 10),
-	MODE_AUTO_DET_PORT1 = (1U << 9),
-	MODE_AUTO_DET_PORT0 = (1U << 8),
-	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
-				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
-				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
-				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
-	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
-	MODE_SAS_PORT6_MASK = (1U << 6),
-	MODE_SAS_PORT5_MASK = (1U << 5),
-	MODE_SAS_PORT4_MASK = (1U << 4),
-	MODE_SAS_PORT3_MASK = (1U << 3),
-	MODE_SAS_PORT2_MASK = (1U << 2),
-	MODE_SAS_PORT1_MASK = (1U << 1),
-	MODE_SAS_PORT0_MASK = (1U << 0),
-	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
-				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
-				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
-				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
-
-				/* SAS_MODE value may be
-				 * dictated (in hw) by values
-				 * of SATA_TARGET & AUTO_DET
-				 */
-
-	/* MVS_TX_CFG */
-	TX_EN			= (1U << 16),	/* Enable TX */
-	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
-
-	/* MVS_RX_CFG */
-	RX_EN			= (1U << 16),	/* Enable RX */
-	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
-
-	/* MVS_INT_COAL */
-	COAL_EN			= (1U << 16),	/* Enable int coalescing */
-
-	/* MVS_INT_STAT, MVS_INT_MASK */
-	CINT_I2C		= (1U << 31),	/* I2C event */
-	CINT_SW0		= (1U << 30),	/* software event 0 */
-	CINT_SW1		= (1U << 29),	/* software event 1 */
-	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
-	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
-	CINT_MEM		= (1U << 26),	/* int mem parity err */
-	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
-	CINT_SRS		= (1U << 3),	/* SRS event */
-	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
-	CINT_DONE		= (1U << 0),	/* cmd completion */
-
-						/* shl for ports 1-3 */
-	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
-	CINT_PORT		= (1U << 8),	/* port0 event */
-	CINT_PORT_MASK_OFFSET	= 8,
-	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
-
-	/* TX (delivery) ring bits */
-	TXQ_CMD_SHIFT		= 29,
-	TXQ_CMD_SSP		= 1,		/* SSP protocol */
-	TXQ_CMD_SMP		= 2,		/* SMP protocol */
-	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
-	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
-	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
-	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
-	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
-	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
-	TXQ_SRS_MASK		= 0x7f,
-	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
-	TXQ_PHY_MASK		= 0xff,
-	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
-
-	/* RX (completion) ring bits */
-	RXQ_GOOD		= (1U << 23),	/* Response good */
-	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
-	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
-	RXQ_ATTN		= (1U << 19),	/* attention */
-	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
-	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
-	RXQ_DONE		= (1U << 16),	/* cmd complete */
-	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
-
-	/* mvs_cmd_hdr bits */
-	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
-	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
-
-						/* SSP initiator only */
-	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
-
-						/* SSP initiator or target */
-	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
-
-						/* SSP target only */
-	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
-	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
-	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
-	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
-
-	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
-	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
-	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
-	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
-	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
-	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
-	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
-	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
-	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
-	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
-
-	CCTL_RST		= (1U << 5),	/* port logic reset */
-
-						/* 0(LSB first), 1(MSB first) */
-	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
-	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
-	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
-	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
-
-	/* MVS_Px_SER_CTLSTAT (per-phy control) */
-	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
-	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
-	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
-	PHY_RST			= (1U << 0),	/* phy reset */
-	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
-	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
-	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
-	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
-			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
-	PHY_READY_MASK		= (1U << 20),
-
-	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
-	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
-	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
-	PHYEV_AN		= (1U << 18),	/* SATA async notification */
-	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
-	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
-	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
-	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
-	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
-	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
-	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
-	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
-	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
-	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
-	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
-	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
-	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
-	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
-	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
-
-	/* MVS_PCS */
-	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
-	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
-	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6480 */
-	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
-	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
-	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
-	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
-	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
-	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
-	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
-
-	/* Port n Attached Device Info */
-	PORT_DEV_SSP_TRGT	= (1U << 19),
-	PORT_DEV_SMP_TRGT	= (1U << 18),
-	PORT_DEV_STP_TRGT	= (1U << 17),
-	PORT_DEV_SSP_INIT	= (1U << 11),
-	PORT_DEV_SMP_INIT	= (1U << 10),
-	PORT_DEV_STP_INIT	= (1U << 9),
-	PORT_PHY_ID_MASK	= (0xFFU << 24),
-	PORT_DEV_TRGT_MASK	= (0x7U << 17),
-	PORT_DEV_INIT_MASK	= (0x7U << 9),
-	PORT_DEV_TYPE_MASK	= (0x7U << 0),
-
-	/* Port n PHY Status */
-	PHY_RDY			= (1U << 2),
-	PHY_DW_SYNC		= (1U << 1),
-	PHY_OOB_DTCTD		= (1U << 0),
-
-	/* VSR */
-	/* PHYMODE 6 (CDB) */
-	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
-	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
-	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
-	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
-	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
-	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
-	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
-	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
-	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
-	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
-	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
-	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
-	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
-	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
-};
-
-enum mvs_info_flags {
-	MVF_MSI			= (1U << 0),	/* MSI is enabled */
-	MVF_PHY_PWR_FIX		= (1U << 1),	/* bug workaround */
-};
-
-enum sas_cmd_port_registers {
-	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
-	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
-	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
-	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
-	CMD_OOB_SPACE		= 0x110, /* OOB space control register */
-	CMD_OOB_BURST		= 0x114, /* OOB burst control register */
-	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
-	CMD_PHY_CONFIG0		= 0x11c, /* PHY config register 0 */
-	CMD_PHY_CONFIG1		= 0x120, /* PHY config register 1 */
-	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
-	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
-	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
-	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
-	CMD_ID_TEST		= 0x134, /* ID test register */
-	CMD_PL_TIMER		= 0x138, /* PL timer register */
-	CMD_WD_TIMER		= 0x13c, /* WD timer register */
-	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
-	CMD_APP_MEM_CTL		= 0x144, /* Application Memory Control */
-	CMD_XOR_MEM_CTL		= 0x148, /* XOR Block Memory Control */
-	CMD_DMA_MEM_CTL		= 0x14c, /* DMA Block Memory Control */
-	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
-	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
-	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
-	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
-	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
-	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
-	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
-	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
-	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
-	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
-	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
-	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
-	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
-	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
-	CMD_RESET_COUNT		= 0x188, /* Reset Count */
-	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
-	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
-	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
-	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
-	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
-	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
-	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
-	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
-	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
-	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
-	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
-	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
-	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
-	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
-	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
-};
-
-/* SAS/SATA configuration port registers, aka phy registers */
-enum sas_sata_config_port_regs {
-	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
-	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
-	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
-	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
-	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
-	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
-	PHYR_SATA_CTL		= 0x18,	/* SATA control */
-	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
-	PHYR_SATA_SIG0		= 0x20,	/*port SATA signature FIS(Byte 0-3) */
-	PHYR_SATA_SIG1		= 0x24,	/*port SATA signature FIS(Byte 4-7) */
-	PHYR_SATA_SIG2		= 0x28,	/*port SATA signature FIS(Byte 8-11) */
-	PHYR_SATA_SIG3		= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
-	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
-	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
-	PHYR_WIDE_PORT		= 0x38,	/* wide port participating */
-	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
-	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
-	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
-};
-
-/*  SAS/SATA Vendor Specific Port Registers */
-enum sas_sata_vsp_regs {
-	VSR_PHY_STAT		= 0x00, /* Phy Status */
-	VSR_PHY_MODE1		= 0x01, /* phy tx */
-	VSR_PHY_MODE2		= 0x02, /* tx scc */
-	VSR_PHY_MODE3		= 0x03, /* pll */
-	VSR_PHY_MODE4		= 0x04, /* VCO */
-	VSR_PHY_MODE5		= 0x05, /* Rx */
-	VSR_PHY_MODE6		= 0x06, /* CDR */
-	VSR_PHY_MODE7		= 0x07, /* Impedance */
-	VSR_PHY_MODE8		= 0x08, /* Voltage */
-	VSR_PHY_MODE9		= 0x09, /* Test */
-	VSR_PHY_MODE10		= 0x0A, /* Power */
-	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
-	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
-	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
-};
-
-enum pci_cfg_registers {
-	PCR_PHY_CTL	= 0x40,
-	PCR_PHY_CTL2	= 0x90,
-	PCR_DEV_CTRL	= 0xE8,
-};
-
-enum pci_cfg_register_bits {
-	PCTL_PWR_ON	= (0xFU << 24),
-	PCTL_OFF	= (0xFU << 12),
-	PRD_REQ_SIZE	= (0x4000),
-	PRD_REQ_MASK	= (0x00007000),
-};
-
-enum nvram_layout_offsets {
-	NVR_SIG		= 0x00,		/* 0xAA, 0x55 */
-	NVR_SAS_ADDR	= 0x02,		/* 8-byte SAS address */
-};
-
-enum chip_flavors {
-	chip_6320,
-	chip_6440,
-	chip_6480,
-};
-
-enum port_type {
-	PORT_TYPE_SAS	=  (1L << 1),
-	PORT_TYPE_SATA	=  (1L << 0),
-};
-
-/* Command Table Format */
-enum ct_format {
-	/* SSP */
-	SSP_F_H		=  0x00,
-	SSP_F_IU	=  0x18,
-	SSP_F_MAX	=  0x4D,
-	/* STP */
-	STP_CMD_FIS	=  0x00,
-	STP_ATAPI_CMD	=  0x40,
-	STP_F_MAX	=  0x10,
-	/* SMP */
-	SMP_F_T		=  0x00,
-	SMP_F_DEP	=  0x01,
-	SMP_F_MAX	=  0x101,
-};
-
-enum status_buffer {
-	SB_EIR_OFF	=  0x00,	/* Error Information Record */
-	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
-	SB_RFB_MAX	=  0x400,	/* RFB size*/
-};
-
-enum error_info_rec {
-	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
-	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
-	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
-	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
-	UNK_FIS 	= (1U << 27),	/* unknown FIS */
-	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
-	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
-	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
-	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
-	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
-	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
-	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
-	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
-	INTERLOCK	= (1U << 15),	/* interlock error */
-	NAK		= (1U << 14),	/* NAK rx'd */
-	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
-	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
-	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
-	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
-	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
-	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
-	BREAK		= (1U << 7),	/* break received */
-	BAD_DEST	= (1U << 6),	/* bad destination */
-	BAD_PROTO	= (1U << 5),	/* protocol not supported */
-	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
-	WRONG_DEST	= (1U << 3),	/* wrong destination error */
-	CREDIT_TO	= (1U << 2),	/* credit timeout */
-	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
-	BUF_PAR 	= (1U << 0),	/* buffer parity error */
-};
-
-enum error_info_rec_2 {
-	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
-	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
-	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
-	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
-	USR_BLK_NM	= (1U << 0),	/* User Block Number */
-};
-
-struct mvs_chip_info {
-	u32		n_phy;
-	u32		srs_sz;
-	u32		slot_width;
-};
-
-struct mvs_err_info {
-	__le32			flags;
-	__le32			flags2;
-};
-
-struct mvs_prd {
-	__le64			addr;		/* 64-bit buffer address */
-	__le32			reserved;
-	__le32			len;		/* 16-bit length */
-};
-
-struct mvs_cmd_hdr {
-	__le32			flags;		/* PRD tbl len; SAS, SATA ctl */
-	__le32			lens;		/* cmd, max resp frame len */
-	__le32			tags;		/* targ port xfer tag; tag */
-	__le32			data_len;	/* data xfer len */
-	__le64			cmd_tbl;	/* command table address */
-	__le64			open_frame;	/* open addr frame address */
-	__le64			status_buf;	/* status buffer address */
-	__le64			prd_tbl;	/* PRD tbl address */
-	__le32			reserved[4];
-};
-
-struct mvs_port {
-	struct asd_sas_port	sas_port;
-	u8			port_attached;
-	u8			taskfileset;
-	u8			wide_port_phymap;
-	struct list_head	list;
-};
-
-struct mvs_phy {
-	struct mvs_port		*port;
-	struct asd_sas_phy	sas_phy;
-	struct sas_identify	identify;
-	struct scsi_device	*sdev;
-	u64		dev_sas_addr;
-	u64		att_dev_sas_addr;
-	u32		att_dev_info;
-	u32		dev_info;
-	u32		phy_type;
-	u32		phy_status;
-	u32		irq_status;
-	u32		frame_rcvd_size;
-	u8		frame_rcvd[32];
-	u8		phy_attached;
-	enum sas_linkrate	minimum_linkrate;
-	enum sas_linkrate	maximum_linkrate;
-};
-
-struct mvs_slot_info {
-	struct list_head	list;
-	struct sas_task		*task;
-	u32			n_elem;
-	u32			tx;
-
-	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
-	 * and PRD table
-	 */
-	void			*buf;
-	dma_addr_t		buf_dma;
-#if _MV_DUMP
-	u32			cmd_size;
-#endif
-
-	void			*response;
-	struct mvs_port		*port;
-};
-
-struct mvs_info {
-	unsigned long		flags;
-
-	spinlock_t		lock;		/* host-wide lock */
-	struct pci_dev		*pdev;		/* our device */
-	void __iomem		*regs;		/* enhanced mode registers */
-	void __iomem		*peri_regs;	/* peripheral registers */
-
-	u8			sas_addr[SAS_ADDR_SIZE];
-	struct sas_ha_struct	sas;		/* SCSI/SAS glue */
-	struct Scsi_Host	*shost;
-
-	__le32			*tx;		/* TX (delivery) DMA ring */
-	dma_addr_t		tx_dma;
-	u32			tx_prod;	/* cached next-producer idx */
-
-	__le32			*rx;		/* RX (completion) DMA ring */
-	dma_addr_t		rx_dma;
-	u32			rx_cons;	/* RX consumer idx */
-
-	__le32			*rx_fis;	/* RX'd FIS area */
-	dma_addr_t		rx_fis_dma;
-
-	struct mvs_cmd_hdr	*slot;	/* DMA command header slots */
-	dma_addr_t		slot_dma;
-
-	const struct mvs_chip_info *chip;
-
-	u8			tags[MVS_SLOTS];
-	struct mvs_slot_info	slot_info[MVS_SLOTS];
-				/* further per-slot information */
-	struct mvs_phy		phy[MVS_MAX_PHYS];
-	struct mvs_port		port[MVS_MAX_PHYS];
-#ifdef MVS_USE_TASKLET
-	struct tasklet_struct	tasklet;
-#endif
-};
-
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
-			   void *funcdata);
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port);
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port);
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val);
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port);
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
-static void mvs_detect_porttype(struct mvs_info *mvi, int i);
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
-static void mvs_release_task(struct mvs_info *mvi, int phy_no);
-
-static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
-static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_slave_configure(struct scsi_device *sdev);
-
-static struct scsi_transport_template *mvs_stt;
-
-static const struct mvs_chip_info mvs_chips[] = {
-	[chip_6320] =		{ 2, 16, 9  },
-	[chip_6440] =		{ 4, 16, 9  },
-	[chip_6480] =		{ 8, 32, 10 },
-};
-
-static struct scsi_host_template mvs_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.queuecommand		= sas_queuecommand,
-	.target_alloc		= sas_target_alloc,
-	.slave_configure	= mvs_slave_configure,
-	.slave_destroy		= sas_slave_destroy,
-	.scan_finished		= mvs_scan_finished,
-	.scan_start		= mvs_scan_start,
-	.change_queue_depth	= sas_change_queue_depth,
-	.change_queue_type	= sas_change_queue_type,
-	.bios_param		= sas_bios_param,
-	.can_queue		= 1,
-	.cmd_per_lun		= 1,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.eh_device_reset_handler	= sas_eh_device_reset_handler,
-	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
-	.slave_alloc		= sas_slave_alloc,
-	.target_destroy		= sas_target_destroy,
-	.ioctl			= sas_ioctl,
-};
-
-static void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
-{
-	u32 i;
-	u32 run;
-	u32 offset;
-
-	offset = 0;
-	while (size) {
-		printk("%08X : ", baseaddr + offset);
-		if (size >= 16)
-			run = 16;
-		else
-			run = size;
-		size -= run;
-		for (i = 0; i < 16; i++) {
-			if (i < run)
-				printk("%02X ", (u32)data[i]);
-			else
-				printk("   ");
-		}
-		printk(": ");
-		for (i = 0; i < run; i++)
-			printk("%c", isalnum(data[i]) ? data[i] : '.');
-		printk("\n");
-		data = &data[16];
-		offset += run;
-	}
-	printk("\n");
-}
-
-#if _MV_DUMP
-static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
-				   enum sas_protocol proto)
-{
-	u32 offset;
-	struct pci_dev *pdev = mvi->pdev;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
-	offset = slot->cmd_size + MVS_OAF_SZ +
-	    sizeof(struct mvs_prd) * slot->n_elem;
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Status buffer[%d] :\n",
-			tag);
-	mvs_hexdump(32, (u8 *) slot->response,
-		    (u32) slot->buf_dma + offset);
-}
-#endif
-
-static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
-				enum sas_protocol proto)
-{
-#if _MV_DUMP
-	u32 sz, w_ptr;
-	u64 addr;
-	void __iomem *regs = mvi->regs;
-	struct pci_dev *pdev = mvi->pdev;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
-	/*Delivery Queue */
-	sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
-	w_ptr = slot->tx;
-	addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Base Address=0x%llX (PA)"
-		"(tx_dma=0x%llX), Entry=%04d\n",
-		addr, mvi->tx_dma, w_ptr);
-	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
-			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
-	/*Command List */
-	addr = mvi->slot_dma;
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Command List Base Address=0x%llX (PA)"
-		"(slot_dma=0x%llX), Header=%03d\n",
-		addr, slot->buf_dma, tag);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
-	/*mvs_cmd_hdr */
-	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
-		(u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
-	/*1.command table area */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Command Table :\n");
-	mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
-	/*2.open address frame area */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Open Address Frame :\n");
-	mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
-				(u32) slot->buf_dma + slot->cmd_size);
-	/*3.status buffer */
-	mvs_hba_sb_dump(mvi, tag, proto);
-	/*4.PRD table */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->PRD table :\n");
-	mvs_hexdump(sizeof(struct mvs_prd) * slot->n_elem,
-		(u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
-		(u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
-#endif
-}
-
-static void mvs_hba_cq_dump(struct mvs_info *mvi)
-{
-#if (_MV_DUMP > 2)
-	u64 addr;
-	void __iomem *regs = mvi->regs;
-	struct pci_dev *pdev = mvi->pdev;
-	u32 entry = mvi->rx_cons + 1;
-	u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
-
-	/*Completion Queue */
-	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
-		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Completion List Base Address=0x%llX (PA), "
-		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
-		addr, entry - 1, mvi->rx[0]);
-	mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
-		    mvi->rx_dma + sizeof(u32) * entry);
-#endif
-}
-
-static void mvs_hba_interrupt_enable(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(GBL_CTL);
-
-	mw32(GBL_CTL, tmp | INT_EN);
-}
-
-static void mvs_hba_interrupt_disable(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(GBL_CTL);
-
-	mw32(GBL_CTL, tmp & ~INT_EN);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
-	int rc;
-
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_printk(KERN_ERR, &pdev->dev,
-					   "64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
-
-	return rc;
-}
-
-static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
-{
-	if (task->lldd_task) {
-		struct mvs_slot_info *slot;
-		slot = (struct mvs_slot_info *) task->lldd_task;
-		*tag = slot - mvi->slot_info;
-		return 1;
-	}
-	return 0;
-}
-
-static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
-{
-	void *bitmap = (void *) &mvi->tags;
-	clear_bit(tag, bitmap);
-}
-
-static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
-{
-	mvs_tag_clear(mvi, tag);
-}
-
-static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
-{
-	void *bitmap = (void *) &mvi->tags;
-	set_bit(tag, bitmap);
-}
-
-static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
-{
-	unsigned int index, tag;
-	void *bitmap = (void *) &mvi->tags;
-
-	index = find_first_zero_bit(bitmap, MVS_SLOTS);
-	tag = index;
-	if (tag >= MVS_SLOTS)
-		return -SAS_QUEUE_FULL;
-	mvs_tag_set(mvi, tag);
-	*tag_out = tag;
-	return 0;
-}
-
-static void mvs_tag_init(struct mvs_info *mvi)
-{
-	int i;
-	for (i = 0; i < MVS_SLOTS; ++i)
-		mvs_tag_clear(mvi, i);
-}
-
-#ifndef MVS_DISABLE_NVRAM
-static int mvs_eep_read(void __iomem *regs, u32 addr, u32 *data)
-{
-	int timeout = 1000;
-
-	if (addr & ~SPI_ADDR_MASK)
-		return -EINVAL;
-
-	writel(addr, regs + SPI_CMD);
-	writel(TWSI_RD, regs + SPI_CTL);
-
-	while (timeout-- > 0) {
-		if (readl(regs + SPI_CTL) & TWSI_RDY) {
-			*data = readl(regs + SPI_DATA);
-			return 0;
-		}
-
-		udelay(10);
-	}
-
-	return -EBUSY;
-}
-
-static int mvs_eep_read_buf(void __iomem *regs, u32 addr,
-			    void *buf, u32 buflen)
-{
-	u32 addr_end, tmp_addr, i, j;
-	u32 tmp = 0;
-	int rc;
-	u8 *tmp8, *buf8 = buf;
-
-	addr_end = addr + buflen;
-	tmp_addr = ALIGN(addr, 4);
-	if (addr > 0xff)
-		return -EINVAL;
-
-	j = addr & 0x3;
-	if (j) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		tmp8 = (u8 *)&tmp;
-		for (i = j; i < 4; i++)
-			*buf8++ = tmp8[i];
-
-		tmp_addr += 4;
-	}
-
-	for (j = ALIGN(addr_end, 4); tmp_addr < j; tmp_addr += 4) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		memcpy(buf8, &tmp, 4);
-		buf8 += 4;
-	}
-
-	if (tmp_addr < addr_end) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		tmp8 = (u8 *)&tmp;
-		j = addr_end - tmp_addr;
-		for (i = 0; i < j; i++)
-			*buf8++ = tmp8[i];
-
-		tmp_addr += 4;
-	}
-
-	return 0;
-}
-#endif
-
-static int mvs_nvram_read(struct mvs_info *mvi, u32 addr,
-			  void *buf, u32 buflen)
-{
-#ifndef MVS_DISABLE_NVRAM
-	void __iomem *regs = mvi->regs;
-	int rc, i;
-	u32 sum;
-	u8 hdr[2], *tmp;
-	const char *msg;
-
-	rc = mvs_eep_read_buf(regs, addr, &hdr, 2);
-	if (rc) {
-		msg = "nvram hdr read failed";
-		goto err_out;
-	}
-	rc = mvs_eep_read_buf(regs, addr + 2, buf, buflen);
-	if (rc) {
-		msg = "nvram read failed";
-		goto err_out;
-	}
-
-	if (hdr[0] != 0x5A) {
-		/* entry id */
-		msg = "invalid nvram entry id";
-		rc = -ENOENT;
-		goto err_out;
-	}
-
-	tmp = buf;
-	sum = ((u32)hdr[0]) + ((u32)hdr[1]);
-	for (i = 0; i < buflen; i++)
-		sum += ((u32)tmp[i]);
-
-	if (sum) {
-		msg = "nvram checksum failure";
-		rc = -EILSEQ;
-		goto err_out;
-	}
-
-	return 0;
-
-err_out:
-	dev_printk(KERN_ERR, &mvi->pdev->dev, "%s", msg);
-	return rc;
-#else
-	/* FIXME , For SAS target mode */
-	memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
-	return 0;
-#endif
-}
-
-static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
-	if (!phy->phy_attached)
-		return;
-
-	if (sas_phy->phy) {
-		struct sas_phy *sphy = sas_phy->phy;
-
-		sphy->negotiated_linkrate = sas_phy->linkrate;
-		sphy->minimum_linkrate = phy->minimum_linkrate;
-		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-		sphy->maximum_linkrate = phy->maximum_linkrate;
-		sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
-	}
-
-	if (phy->phy_type & PORT_TYPE_SAS) {
-		struct sas_identify_frame *id;
-
-		id = (struct sas_identify_frame *)phy->frame_rcvd;
-		id->dev_type = phy->identify.device_type;
-		id->initiator_bits = SAS_PROTOCOL_ALL;
-		id->target_bits = phy->identify.target_port_protocols;
-	} else if (phy->phy_type & PORT_TYPE_SATA) {
-		/* TODO */
-	}
-	mvi->sas.sas_phy[i]->frame_rcvd_size = phy->frame_rcvd_size;
-	mvi->sas.notify_port_event(mvi->sas.sas_phy[i],
-				   PORTE_BYTES_DMAED);
-}
-
-static int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
-	/* give the phy enabling interrupt event time to come in (1s
-	 * is empirically about all it takes) */
-	if (time < HZ)
-		return 0;
-	/* Wait for discovery to finish */
-	scsi_flush_work(shost);
-	return 1;
-}
-
-static void mvs_scan_start(struct Scsi_Host *shost)
-{
-	int i;
-	struct mvs_info *mvi = SHOST_TO_SAS_HA(shost)->lldd_ha;
-
-	for (i = 0; i < mvi->chip->n_phy; ++i) {
-		mvs_bytes_dmaed(mvi, i);
-	}
-}
-
-static int mvs_slave_configure(struct scsi_device *sdev)
-{
-	struct domain_device *dev = sdev_to_domain_dev(sdev);
-	int ret = sas_slave_configure(sdev);
-
-	if (ret)
-		return ret;
-
-	if (dev_is_sata(dev)) {
-		/* struct ata_port *ap = dev->sata_dev.ap; */
-		/* struct ata_device *adev = ap->link.device; */
-
-		/* clamp at no NCQ for the time being */
-		/* adev->flags |= ATA_DFLAG_NCQ_OFF; */
-		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
-	}
-	return 0;
-}
-
-static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
-{
-	struct pci_dev *pdev = mvi->pdev;
-	struct sas_ha_struct *sas_ha = &mvi->sas;
-	struct mvs_phy *phy = &mvi->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
-	phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
-	/*
-	* events is port event now ,
-	* we need check the interrupt status which belongs to per port.
-	*/
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Port %d Event = %X\n",
-		phy_no, phy->irq_status);
-
-	if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
-		mvs_release_task(mvi, phy_no);
-		if (!mvs_is_phy_ready(mvi, phy_no)) {
-			sas_phy_disconnected(sas_phy);
-			sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
-			dev_printk(KERN_INFO, &pdev->dev,
-				"Port %d Unplug Notice\n", phy_no);
-
-		} else
-			mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
-	}
-	if (!(phy->irq_status & PHYEV_DEC_ERR)) {
-		if (phy->irq_status & PHYEV_COMWAKE) {
-			u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
-			mvs_write_port_irq_mask(mvi, phy_no,
-						tmp | PHYEV_SIG_FIS);
-		}
-		if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
-			phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
-			if (phy->phy_status) {
-				mvs_detect_porttype(mvi, phy_no);
-
-				if (phy->phy_type & PORT_TYPE_SATA) {
-					u32 tmp = mvs_read_port_irq_mask(mvi,
-								phy_no);
-					tmp &= ~PHYEV_SIG_FIS;
-					mvs_write_port_irq_mask(mvi,
-								phy_no, tmp);
-				}
-
-				mvs_update_phyinfo(mvi, phy_no, 0);
-				sas_ha->notify_phy_event(sas_phy,
-							PHYE_OOB_DONE);
-				mvs_bytes_dmaed(mvi, phy_no);
-			} else {
-				dev_printk(KERN_DEBUG, &pdev->dev,
-					"plugin interrupt but phy is gone\n");
-				mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
-							NULL);
-			}
-		} else if (phy->irq_status & PHYEV_BROAD_CH) {
-			mvs_release_task(mvi, phy_no);
-			sas_ha->notify_port_event(sas_phy,
-						PORTE_BROADCAST_RCVD);
-		}
-	}
-	mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
-}
-
-static void mvs_int_sata(struct mvs_info *mvi)
-{
-	u32 tmp;
-	void __iomem *regs = mvi->regs;
-	tmp = mr32(INT_STAT_SRS);
-	mw32(INT_STAT_SRS, tmp & 0xFFFF);
-}
-
-static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
-				u32 slot_idx)
-{
-	void __iomem *regs = mvi->regs;
-	struct domain_device *dev = task->dev;
-	struct asd_sas_port *sas_port = dev->port;
-	struct mvs_port *port = mvi->slot_info[slot_idx].port;
-	u32 reg_set, phy_mask;
-
-	if (!sas_protocol_ata(task->task_proto)) {
-		reg_set = 0;
-		phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
-				sas_port->phy_mask;
-	} else {
-		reg_set = port->taskfileset;
-		phy_mask = sas_port->phy_mask;
-	}
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
-					(TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
-					(phy_mask << TXQ_PHY_SHIFT) |
-					(reg_set << TXQ_SRS_SHIFT));
-
-	mw32(TX_PROD_IDX, mvi->tx_prod);
-	mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-}
-
-static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
-			u32 slot_idx, int err)
-{
-	struct mvs_port *port = mvi->slot_info[slot_idx].port;
-	struct task_status_struct *tstat = &task->task_status;
-	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
-	int stat = SAM_GOOD;
-
-	resp->frame_len = sizeof(struct dev_to_host_fis);
-	memcpy(&resp->ending_fis[0],
-	       SATA_RECEIVED_D2H_FIS(port->taskfileset),
-	       sizeof(struct dev_to_host_fis));
-	tstat->buf_valid_size = sizeof(*resp);
-	if (unlikely(err))
-		stat = SAS_PROTO_RESPONSE;
-	return stat;
-}
-
-static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
-{
-	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
-	mvs_tag_clear(mvi, slot_idx);
-}
-
-static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
-			  struct mvs_slot_info *slot, u32 slot_idx)
-{
-	if (!sas_protocol_ata(task->task_proto))
-		if (slot->n_elem)
-			pci_unmap_sg(mvi->pdev, task->scatter,
-				     slot->n_elem, task->data_dir);
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SMP:
-		pci_unmap_sg(mvi->pdev, &task->smp_task.smp_resp, 1,
-			     PCI_DMA_FROMDEVICE);
-		pci_unmap_sg(mvi->pdev, &task->smp_task.smp_req, 1,
-			     PCI_DMA_TODEVICE);
-		break;
-
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SSP:
-	default:
-		/* do nothing */
-		break;
-	}
-	list_del(&slot->list);
-	task->lldd_task = NULL;
-	slot->task = NULL;
-	slot->port = NULL;
-}
-
-static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
-			 u32 slot_idx)
-{
-	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
-	u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
-	int stat = SAM_CHECK_COND;
-
-	if (err_dw1 & SLOT_BSY_ERR) {
-		stat = SAS_QUEUE_FULL;
-		mvs_slot_reset(mvi, task, slot_idx);
-	}
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SSP:
-		break;
-	case SAS_PROTOCOL_SMP:
-		break;
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-		if (err_dw0 & TFILE_ERR)
-			stat = mvs_sata_done(mvi, task, slot_idx, 1);
-		break;
-	default:
-		break;
-	}
-
-	mvs_hexdump(16, (u8 *) slot->response, 0);
-	return stat;
-}
-
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
-{
-	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
-	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	struct sas_task *task = slot->task;
-	struct task_status_struct *tstat;
-	struct mvs_port *port;
-	bool aborted;
-	void *to;
-
-	if (unlikely(!task || !task->lldd_task))
-		return -1;
-
-	mvs_hba_cq_dump(mvi);
-
-	spin_lock(&task->task_state_lock);
-	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
-	if (!aborted) {
-		task->task_state_flags &=
-		    ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
-		task->task_state_flags |= SAS_TASK_STATE_DONE;
-	}
-	spin_unlock(&task->task_state_lock);
-
-	if (aborted) {
-		mvs_slot_task_free(mvi, task, slot, slot_idx);
-		mvs_slot_free(mvi, rx_desc);
-		return -1;
-	}
-
-	port = slot->port;
-	tstat = &task->task_status;
-	memset(tstat, 0, sizeof(*tstat));
-	tstat->resp = SAS_TASK_COMPLETE;
-
-	if (unlikely(!port->port_attached || flags)) {
-		mvs_slot_err(mvi, task, slot_idx);
-		if (!sas_protocol_ata(task->task_proto))
-			tstat->stat = SAS_PHY_DOWN;
-		goto out;
-	}
-
-	/* error info record present */
-	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
-		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
-		goto out;
-	}
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SSP:
-		/* hw says status == 0, datapres == 0 */
-		if (rx_desc & RXQ_GOOD) {
-			tstat->stat = SAM_GOOD;
-			tstat->resp = SAS_TASK_COMPLETE;
-		}
-		/* response frame present */
-		else if (rx_desc & RXQ_RSP) {
-			struct ssp_response_iu *iu =
-			    slot->response + sizeof(struct mvs_err_info);
-			sas_ssp_task_response(&mvi->pdev->dev, task, iu);
-		}
-
-		/* should never happen? */
-		else
-			tstat->stat = SAM_CHECK_COND;
-		break;
-
-	case SAS_PROTOCOL_SMP: {
-			struct scatterlist *sg_resp = &task->smp_task.smp_resp;
-			tstat->stat = SAM_GOOD;
-			to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
-			memcpy(to + sg_resp->offset,
-				slot->response + sizeof(struct mvs_err_info),
-				sg_dma_len(sg_resp));
-			kunmap_atomic(to, KM_IRQ0);
-			break;
-		}
-
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
-			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
-			break;
-		}
-
-	default:
-		tstat->stat = SAM_CHECK_COND;
-		break;
-	}
-
-out:
-	mvs_slot_task_free(mvi, task, slot, slot_idx);
-	if (unlikely(tstat->stat != SAS_QUEUE_FULL))
-		mvs_slot_free(mvi, rx_desc);
-
-	spin_unlock(&mvi->lock);
-	task->task_done(task);
-	spin_lock(&mvi->lock);
-	return tstat->stat;
-}
-
-static void mvs_release_task(struct mvs_info *mvi, int phy_no)
-{
-	struct list_head *pos, *n;
-	struct mvs_slot_info *slot;
-	struct mvs_phy *phy = &mvi->phy[phy_no];
-	struct mvs_port *port = phy->port;
-	u32 rx_desc;
-
-	if (!port)
-		return;
-
-	list_for_each_safe(pos, n, &port->list) {
-		slot = container_of(pos, struct mvs_slot_info, list);
-		rx_desc = (u32) (slot - mvi->slot_info);
-		mvs_slot_complete(mvi, rx_desc, 1);
-	}
-}
-
-static void mvs_int_full(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp, stat;
-	int i;
-
-	stat = mr32(INT_STAT);
-
-	mvs_int_rx(mvi, false);
-
-	for (i = 0; i < MVS_MAX_PORTS; i++) {
-		tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
-		if (tmp)
-			mvs_int_port(mvi, i, tmp);
-	}
-
-	if (stat & CINT_SRS)
-		mvs_int_sata(mvi);
-
-	mw32(INT_STAT, stat);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
-{
-	void __iomem *regs = mvi->regs;
-	u32 rx_prod_idx, rx_desc;
-	bool attn = false;
-	struct pci_dev *pdev = mvi->pdev;
-
-	/* the first dword in the RX ring is special: it contains
-	 * a mirror of the hardware's RX producer index, so that
-	 * we don't have to stall the CPU reading that register.
-	 * The actual RX ring is offset by one dword, due to this.
-	 */
-	rx_prod_idx = mvi->rx_cons;
-	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
-	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
-		return 0;
-
-	/* The CMPL_Q may come late, read from register and try again
-	* note: if coalescing is enabled,
-	* it will need to read from register every time for sure
-	*/
-	if (mvi->rx_cons == rx_prod_idx)
-		mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
-
-	if (mvi->rx_cons == rx_prod_idx)
-		return 0;
-
-	while (mvi->rx_cons != rx_prod_idx) {
-
-		/* increment our internal RX consumer pointer */
-		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
-
-		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
-
-		if (likely(rx_desc & RXQ_DONE))
-			mvs_slot_complete(mvi, rx_desc, 0);
-		if (rx_desc & RXQ_ATTN) {
-			attn = true;
-			dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
-				rx_desc);
-		} else if (rx_desc & RXQ_ERR) {
-			if (!(rx_desc & RXQ_DONE))
-				mvs_slot_complete(mvi, rx_desc, 0);
-			dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
-				rx_desc);
-		} else if (rx_desc & RXQ_SLOT_RESET) {
-			dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
-				rx_desc);
-			mvs_slot_free(mvi, rx_desc);
-		}
-	}
-
-	if (attn && self_clear)
-		mvs_int_full(mvi);
-
-	return 0;
-}
-
-#ifdef MVS_USE_TASKLET
-static void mvs_tasklet(unsigned long data)
-{
-	struct mvs_info *mvi = (struct mvs_info *) data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-
-#ifdef MVS_DISABLE_MSI
-	mvs_int_full(mvi);
-#else
-	mvs_int_rx(mvi, true);
-#endif
-	spin_unlock_irqrestore(&mvi->lock, flags);
-}
-#endif
-
-static irqreturn_t mvs_interrupt(int irq, void *opaque)
-{
-	struct mvs_info *mvi = opaque;
-	void __iomem *regs = mvi->regs;
-	u32 stat;
-
-	stat = mr32(GBL_INT_STAT);
-
-	if (stat == 0 || stat == 0xffffffff)
-		return IRQ_NONE;
-
-	/* clear CMD_CMPLT ASAP */
-	mw32_f(INT_STAT, CINT_DONE);
-
-#ifndef MVS_USE_TASKLET
-	spin_lock(&mvi->lock);
-
-	mvs_int_full(mvi);
-
-	spin_unlock(&mvi->lock);
-#else
-	tasklet_schedule(&mvi->tasklet);
-#endif
-	return IRQ_HANDLED;
-}
-
-#ifndef MVS_DISABLE_MSI
-static irqreturn_t mvs_msi_interrupt(int irq, void *opaque)
-{
-	struct mvs_info *mvi = opaque;
-
-#ifndef MVS_USE_TASKLET
-	spin_lock(&mvi->lock);
-
-	mvs_int_rx(mvi, true);
-
-	spin_unlock(&mvi->lock);
-#else
-	tasklet_schedule(&mvi->tasklet);
-#endif
-	return IRQ_HANDLED;
-}
-#endif
-
-struct mvs_task_exec_info {
-	struct sas_task *task;
-	struct mvs_cmd_hdr *hdr;
-	struct mvs_port *port;
-	u32 tag;
-	int n_elem;
-};
-
-static int mvs_task_prep_smp(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	int elem, rc, i;
-	struct sas_task *task = tei->task;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct scatterlist *sg_req, *sg_resp;
-	u32 req_len, resp_len, tag = tei->tag;
-	void *buf_tmp;
-	u8 *buf_oaf;
-	dma_addr_t buf_tmp_dma;
-	struct mvs_prd *buf_prd;
-	struct scatterlist *sg;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-	struct asd_sas_port *sas_port = task->dev->port;
-	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-#if _MV_DUMP
-	u8 *buf_cmd;
-	void *from;
-#endif
-	/*
-	 * DMA-map SMP request, response buffers
-	 */
-	sg_req = &task->smp_task.smp_req;
-	elem = pci_map_sg(mvi->pdev, sg_req, 1, PCI_DMA_TODEVICE);
-	if (!elem)
-		return -ENOMEM;
-	req_len = sg_dma_len(sg_req);
-
-	sg_resp = &task->smp_task.smp_resp;
-	elem = pci_map_sg(mvi->pdev, sg_resp, 1, PCI_DMA_FROMDEVICE);
-	if (!elem) {
-		rc = -ENOMEM;
-		goto err_out;
-	}
-	resp_len = sg_dma_len(sg_resp);
-
-	/* must be in dwords */
-	if ((req_len & 0x3) || (resp_len & 0x3)) {
-		rc = -EINVAL;
-		goto err_out_2;
-	}
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
-	buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-#if _MV_DUMP
-	buf_cmd = buf_tmp;
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-	buf_tmp += req_len;
-	buf_tmp_dma += req_len;
-	slot->cmd_size = req_len;
-#else
-	hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	/*
-	 * Fill in TX ring and command slot header
-	 */
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
-					TXQ_MODE_I | tag |
-					(sas_port->phy_mask << TXQ_PHY_SHIFT));
-
-	hdr->flags |= flags;
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
-	hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = 0;
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (0 << 4) | 0x01; /* initiator, SMP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = 0xFFFF;		/* SAS SPEC */
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-#if _MV_DUMP
-	/* copy cmd table */
-	from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
-	memcpy(buf_cmd, from + sg_req->offset, req_len);
-	kunmap_atomic(from, KM_IRQ0);
-#endif
-	return 0;
-
-err_out_2:
-	pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_resp, 1,
-		     PCI_DMA_FROMDEVICE);
-err_out:
-	pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_req, 1,
-		     PCI_DMA_TODEVICE);
-	return rc;
-}
-
-static void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp, offs;
-	u8 *tfs = &port->taskfileset;
-
-	if (*tfs == MVS_ID_NOT_MAPPED)
-		return;
-
-	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
-	if (*tfs < 16) {
-		tmp = mr32(PCS);
-		mw32(PCS, tmp & ~offs);
-	} else {
-		tmp = mr32(CTL);
-		mw32(CTL, tmp & ~offs);
-	}
-
-	tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
-	if (tmp)
-		mw32(INT_STAT_SRS, tmp);
-
-	*tfs = MVS_ID_NOT_MAPPED;
-}
-
-static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
-	int i;
-	u32 tmp, offs;
-	void __iomem *regs = mvi->regs;
-
-	if (port->taskfileset != MVS_ID_NOT_MAPPED)
-		return 0;
-
-	tmp = mr32(PCS);
-
-	for (i = 0; i < mvi->chip->srs_sz; i++) {
-		if (i == 16)
-			tmp = mr32(CTL);
-		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
-		if (!(tmp & offs)) {
-			port->taskfileset = i;
-
-			if (i < 16)
-				mw32(PCS, tmp | offs);
-			else
-				mw32(CTL, tmp | offs);
-			tmp = mr32(INT_STAT_SRS) & (1U << i);
-			if (tmp)
-				mw32(INT_STAT_SRS, tmp);
-			return 0;
-		}
-	}
-	return MVS_ID_NOT_MAPPED;
-}
-
-static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
-{
-	struct ata_queued_cmd *qc = task->uldd_task;
-
-	if (qc) {
-		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
-			qc->tf.command == ATA_CMD_FPDMA_READ) {
-			*tag = qc->tag;
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static int mvs_task_prep_ata(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	struct sas_task *task = tei->task;
-	struct domain_device *dev = task->dev;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct asd_sas_port *sas_port = dev->port;
-	struct mvs_slot_info *slot;
-	struct scatterlist *sg;
-	struct mvs_prd *buf_prd;
-	struct mvs_port *port = tei->port;
-	u32 tag = tei->tag;
-	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-	void *buf_tmp;
-	u8 *buf_cmd, *buf_oaf;
-	dma_addr_t buf_tmp_dma;
-	u32 i, req_len, resp_len;
-	const u32 max_resp_len = SB_RFB_MAX;
-
-	if (mvs_assign_reg_set(mvi, port) == MVS_ID_NOT_MAPPED)
-		return -EBUSY;
-
-	slot = &mvi->slot_info[tag];
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
-					(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
-					(sas_port->phy_mask << TXQ_PHY_SHIFT) |
-					(port->taskfileset << TXQ_SRS_SHIFT));
-
-	if (task->ata_task.use_ncq)
-		flags |= MCH_FPDMA;
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
-		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
-			flags |= MCH_ATAPI;
-	}
-
-	/* FIXME: fill in port multiplier number */
-
-	hdr->flags = cpu_to_le32(flags);
-
-	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
-	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
-		task->ata_task.fis.sector_count |= hdr->tags << 3;
-	else
-		hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
-	buf_cmd = buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_ATA_CMD_SZ;
-	buf_tmp_dma += MVS_ATA_CMD_SZ;
-#if _MV_DUMP
-	slot->cmd_size = MVS_ATA_CMD_SZ;
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	/* used for STP.  unused for SATA? */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	/* FIXME: probably unused, for SATA.  kept here just in case
-	 * we get a STP/SATA error information record
-	 */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	req_len = sizeof(struct host_to_dev_fis);
-	resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
-	    sizeof(struct mvs_err_info) - i;
-
-	/* request, response lengths */
-	resp_len = min(resp_len, max_resp_len);
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
-	task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
-	/* fill in command FIS and ATAPI CDB */
-	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
-		memcpy(buf_cmd + STP_ATAPI_CMD,
-			task->ata_task.atapi_packet, 16);
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (2 << 4) | 0x1;	/* initiator, STP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-	return 0;
-}
-
-static int mvs_task_prep_ssp(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	struct sas_task *task = tei->task;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct mvs_port *port = tei->port;
-	struct mvs_slot_info *slot;
-	struct scatterlist *sg;
-	struct mvs_prd *buf_prd;
-	struct ssp_frame_hdr *ssp_hdr;
-	void *buf_tmp;
-	u8 *buf_cmd, *buf_oaf, fburst = 0;
-	dma_addr_t buf_tmp_dma;
-	u32 flags;
-	u32 resp_len, req_len, i, tag = tei->tag;
-	const u32 max_resp_len = SB_RFB_MAX;
-	u8 phy_mask;
-
-	slot = &mvi->slot_info[tag];
-
-	phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
-		task->dev->port->phy_mask;
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
-				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
-				(phy_mask << TXQ_PHY_SHIFT));
-
-	flags = MCH_RETRY;
-	if (task->ssp_task.enable_first_burst) {
-		flags |= MCH_FBURST;
-		fburst = (1 << 7);
-	}
-	hdr->flags = cpu_to_le32(flags |
-				 (tei->n_elem << MCH_PRD_LEN_SHIFT) |
-				 (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT));
-
-	hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
-	buf_cmd = buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_SSP_CMD_SZ;
-	buf_tmp_dma += MVS_SSP_CMD_SZ;
-#if _MV_DUMP
-	slot->cmd_size = MVS_SSP_CMD_SZ;
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
-	    sizeof(struct mvs_err_info) - i;
-	resp_len = min(resp_len, max_resp_len);
-
-	req_len = sizeof(struct ssp_frame_hdr) + 28;
-
-	/* request, response lengths */
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (1 << 4) | 0x1;	/* initiator, SSP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in SSP frame header (Command Table.SSP frame header) */
-	ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
-	ssp_hdr->frame_type = SSP_COMMAND;
-	memcpy(ssp_hdr->hashed_dest_addr, task->dev->hashed_sas_addr,
-	       HASHED_SAS_ADDR_SIZE);
-	memcpy(ssp_hdr->hashed_src_addr,
-	       task->dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
-	ssp_hdr->tag = cpu_to_be16(tag);
-
-	/* fill in command frame IU */
-	buf_cmd += sizeof(*ssp_hdr);
-	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	buf_cmd[9] = fburst | task->ssp_task.task_attr |
-			(task->ssp_task.task_prio << 3);
-	memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-	return 0;
-}
-
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
-{
-	struct domain_device *dev = task->dev;
-	struct mvs_info *mvi = dev->port->ha->lldd_ha;
-	struct pci_dev *pdev = mvi->pdev;
-	void __iomem *regs = mvi->regs;
-	struct mvs_task_exec_info tei;
-	struct sas_task *t = task;
-	struct mvs_slot_info *slot;
-	u32 tag = 0xdeadbeef, rc, n_elem = 0;
-	unsigned long flags;
-	u32 n = num, pass = 0;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-	do {
-		dev = t->dev;
-		tei.port = &mvi->port[dev->port->id];
-
-		if (!tei.port->port_attached) {
-			if (sas_protocol_ata(t->task_proto)) {
-				rc = SAS_PHY_DOWN;
-				goto out_done;
-			} else {
-				struct task_status_struct *ts = &t->task_status;
-				ts->resp = SAS_TASK_UNDELIVERED;
-				ts->stat = SAS_PHY_DOWN;
-				t->task_done(t);
-				if (n > 1)
-					t = list_entry(t->list.next,
-							struct sas_task, list);
-				continue;
-			}
-		}
-
-		if (!sas_protocol_ata(t->task_proto)) {
-			if (t->num_scatter) {
-				n_elem = pci_map_sg(mvi->pdev, t->scatter,
-						    t->num_scatter,
-						    t->data_dir);
-				if (!n_elem) {
-					rc = -ENOMEM;
-					goto err_out;
-				}
-			}
-		} else {
-			n_elem = t->num_scatter;
-		}
-
-		rc = mvs_tag_alloc(mvi, &tag);
-		if (rc)
-			goto err_out;
-
-		slot = &mvi->slot_info[tag];
-		t->lldd_task = NULL;
-		slot->n_elem = n_elem;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-		tei.task = t;
-		tei.hdr = &mvi->slot[tag];
-		tei.tag = tag;
-		tei.n_elem = n_elem;
-
-		switch (t->task_proto) {
-		case SAS_PROTOCOL_SMP:
-			rc = mvs_task_prep_smp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SSP:
-			rc = mvs_task_prep_ssp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SATA:
-		case SAS_PROTOCOL_STP:
-		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-			rc = mvs_task_prep_ata(mvi, &tei);
-			break;
-		default:
-			dev_printk(KERN_ERR, &pdev->dev,
-				"unknown sas_task proto: 0x%x\n",
-				t->task_proto);
-			rc = -EINVAL;
-			break;
-		}
-
-		if (rc)
-			goto err_out_tag;
-
-		slot->task = t;
-		slot->port = tei.port;
-		t->lldd_task = (void *) slot;
-		list_add_tail(&slot->list, &slot->port->list);
-		/* TODO: select normal or high priority */
-
-		spin_lock(&t->task_state_lock);
-		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
-		spin_unlock(&t->task_state_lock);
-
-		mvs_hba_memory_dump(mvi, tag, t->task_proto);
-
-		++pass;
-		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-		if (n > 1)
-			t = list_entry(t->list.next, struct sas_task, list);
-	} while (--n);
-
-	rc = 0;
-	goto out_done;
-
-err_out_tag:
-	mvs_tag_free(mvi, tag);
-err_out:
-	dev_printk(KERN_ERR, &pdev->dev, "mvsas exec failed[%d]!\n", rc);
-	if (!sas_protocol_ata(t->task_proto))
-		if (n_elem)
-			pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
-				     t->data_dir);
-out_done:
-	if (pass)
-		mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-	spin_unlock_irqrestore(&mvi->lock, flags);
-	return rc;
-}
-
-static int mvs_task_abort(struct sas_task *task)
-{
-	int rc;
-	unsigned long flags;
-	struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
-	struct pci_dev *pdev = mvi->pdev;
-	int tag;
-
-	spin_lock_irqsave(&task->task_state_lock, flags);
-	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
-		rc = TMF_RESP_FUNC_COMPLETE;
-		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		goto out_done;
-	}
-	spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SMP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
-		break;
-	case SAS_PROTOCOL_SSP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
-		break;
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
-		dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
-#if _MV_DUMP
-		dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
-		mvs_hexdump(sizeof(struct host_to_dev_fis),
-				(void *)&task->ata_task.fis, 0);
-		dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
-		mvs_hexdump(16, task->ata_task.atapi_packet, 0);
-#endif
-		spin_lock_irqsave(&task->task_state_lock, flags);
-		if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
-			/* TODO */
-			;
-		}
-		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		break;
-	}
-	default:
-		break;
-	}
-
-	if (mvs_find_tag(mvi, task, &tag)) {
-		spin_lock_irqsave(&mvi->lock, flags);
-		mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
-		spin_unlock_irqrestore(&mvi->lock, flags);
-	}
-	if (!mvs_task_exec(task, 1, GFP_ATOMIC))
-		rc = TMF_RESP_FUNC_COMPLETE;
-	else
-		rc = TMF_RESP_FUNC_FAILED;
-out_done:
-	return rc;
-}
-
-static void mvs_free(struct mvs_info *mvi)
-{
-	int i;
-
-	if (!mvi)
-		return;
-
-	for (i = 0; i < MVS_SLOTS; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		if (slot->buf)
-			dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
-					  slot->buf, slot->buf_dma);
-	}
-
-	if (mvi->tx)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
-				  mvi->tx, mvi->tx_dma);
-	if (mvi->rx_fis)
-		dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
-				  mvi->rx_fis, mvi->rx_fis_dma);
-	if (mvi->rx)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
-				  mvi->rx, mvi->rx_dma);
-	if (mvi->slot)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->slot) * MVS_SLOTS,
-				  mvi->slot, mvi->slot_dma);
-#ifdef MVS_ENABLE_PERI
-	if (mvi->peri_regs)
-		iounmap(mvi->peri_regs);
-#endif
-	if (mvi->regs)
-		iounmap(mvi->regs);
-	if (mvi->shost)
-		scsi_host_put(mvi->shost);
-	kfree(mvi->sas.sas_port);
-	kfree(mvi->sas.sas_phy);
-	kfree(mvi);
-}
-
-/* FIXME: locking? */
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
-			   void *funcdata)
-{
-	struct mvs_info *mvi = sas_phy->ha->lldd_ha;
-	int rc = 0, phy_id = sas_phy->id;
-	u32 tmp;
-
-	tmp = mvs_read_phy_ctl(mvi, phy_id);
-
-	switch (func) {
-	case PHY_FUNC_SET_LINK_RATE:{
-			struct sas_phy_linkrates *rates = funcdata;
-			u32 lrmin = 0, lrmax = 0;
-
-			lrmin = (rates->minimum_linkrate << 8);
-			lrmax = (rates->maximum_linkrate << 12);
-
-			if (lrmin) {
-				tmp &= ~(0xf << 8);
-				tmp |= lrmin;
-			}
-			if (lrmax) {
-				tmp &= ~(0xf << 12);
-				tmp |= lrmax;
-			}
-			mvs_write_phy_ctl(mvi, phy_id, tmp);
-			break;
-		}
-
-	case PHY_FUNC_HARD_RESET:
-		if (tmp & PHY_RST_HARD)
-			break;
-		mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST_HARD);
-		break;
-
-	case PHY_FUNC_LINK_RESET:
-		mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST);
-		break;
-
-	case PHY_FUNC_DISABLE:
-	case PHY_FUNC_RELEASE_SPINUP_HOLD:
-	default:
-		rc = -EOPNOTSUPP;
-	}
-
-	return rc;
-}
-
-static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
-{
-	struct mvs_phy *phy = &mvi->phy[phy_id];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
-	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
-	sas_phy->class = SAS;
-	sas_phy->iproto = SAS_PROTOCOL_ALL;
-	sas_phy->tproto = 0;
-	sas_phy->type = PHY_TYPE_PHYSICAL;
-	sas_phy->role = PHY_ROLE_INITIATOR;
-	sas_phy->oob_mode = OOB_NOT_CONNECTED;
-	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
-
-	sas_phy->id = phy_id;
-	sas_phy->sas_addr = &mvi->sas_addr[0];
-	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
-	sas_phy->ha = &mvi->sas;
-	sas_phy->lldd_phy = phy;
-}
-
-static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
-					    const struct pci_device_id *ent)
-{
-	struct mvs_info *mvi;
-	unsigned long res_start, res_len, res_flag;
-	struct asd_sas_phy **arr_phy;
-	struct asd_sas_port **arr_port;
-	const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
-	int i;
-
-	/*
-	 * alloc and init our per-HBA mvs_info struct
-	 */
-
-	mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
-	if (!mvi)
-		return NULL;
-
-	spin_lock_init(&mvi->lock);
-#ifdef MVS_USE_TASKLET
-	tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
-#endif
-	mvi->pdev = pdev;
-	mvi->chip = chip;
-
-	if (pdev->device == 0x6440 && pdev->revision == 0)
-		mvi->flags |= MVF_PHY_PWR_FIX;
-
-	/*
-	 * alloc and init SCSI, SAS glue
-	 */
-
-	mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
-	if (!mvi->shost)
-		goto err_out;
-
-	arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
-	arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
-	if (!arr_phy || !arr_port)
-		goto err_out;
-
-	for (i = 0; i < MVS_MAX_PHYS; i++) {
-		mvs_phy_init(mvi, i);
-		arr_phy[i] = &mvi->phy[i].sas_phy;
-		arr_port[i] = &mvi->port[i].sas_port;
-		mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
-		mvi->port[i].wide_port_phymap = 0;
-		mvi->port[i].port_attached = 0;
-		INIT_LIST_HEAD(&mvi->port[i].list);
-	}
-
-	SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
-	mvi->shost->transportt = mvs_stt;
-	mvi->shost->max_id = 21;
-	mvi->shost->max_lun = ~0;
-	mvi->shost->max_channel = 0;
-	mvi->shost->max_cmd_len = 16;
-
-	mvi->sas.sas_ha_name = DRV_NAME;
-	mvi->sas.dev = &pdev->dev;
-	mvi->sas.lldd_module = THIS_MODULE;
-	mvi->sas.sas_addr = &mvi->sas_addr[0];
-	mvi->sas.sas_phy = arr_phy;
-	mvi->sas.sas_port = arr_port;
-	mvi->sas.num_phys = chip->n_phy;
-	mvi->sas.lldd_max_execute_num = 1;
-	mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
-	mvi->shost->can_queue = MVS_CAN_QUEUE;
-	mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
-	mvi->sas.lldd_ha = mvi;
-	mvi->sas.core.shost = mvi->shost;
-
-	mvs_tag_init(mvi);
-
-	/*
-	 * ioremap main and peripheral registers
-	 */
-
-#ifdef MVS_ENABLE_PERI
-	res_start = pci_resource_start(pdev, 2);
-	res_len = pci_resource_len(pdev, 2);
-	if (!res_start || !res_len)
-		goto err_out;
-
-	mvi->peri_regs = ioremap_nocache(res_start, res_len);
-	if (!mvi->peri_regs)
-		goto err_out;
-#endif
-
-	res_start = pci_resource_start(pdev, 4);
-	res_len = pci_resource_len(pdev, 4);
-	if (!res_start || !res_len)
-		goto err_out;
-
-	res_flag = pci_resource_flags(pdev, 4);
-	if (res_flag & IORESOURCE_CACHEABLE)
-		mvi->regs = ioremap(res_start, res_len);
-	else
-		mvi->regs = ioremap_nocache(res_start, res_len);
-
-	if (!mvi->regs)
-		goto err_out;
-
-	/*
-	 * alloc and init our DMA areas
-	 */
-
-	mvi->tx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
-				     &mvi->tx_dma, GFP_KERNEL);
-	if (!mvi->tx)
-		goto err_out;
-	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
-
-	mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
-					 &mvi->rx_fis_dma, GFP_KERNEL);
-	if (!mvi->rx_fis)
-		goto err_out;
-	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
-
-	mvi->rx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
-				     &mvi->rx_dma, GFP_KERNEL);
-	if (!mvi->rx)
-		goto err_out;
-	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
-
-	mvi->rx[0] = cpu_to_le32(0xfff);
-	mvi->rx_cons = 0xfff;
-
-	mvi->slot = dma_alloc_coherent(&pdev->dev,
-				       sizeof(*mvi->slot) * MVS_SLOTS,
-				       &mvi->slot_dma, GFP_KERNEL);
-	if (!mvi->slot)
-		goto err_out;
-	memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
-
-	for (i = 0; i < MVS_SLOTS; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
-					       &slot->buf_dma, GFP_KERNEL);
-		if (!slot->buf)
-			goto err_out;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-	}
-
-	/* finally, read NVRAM to get our SAS address */
-	if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
-		goto err_out;
-	return mvi;
-
-err_out:
-	mvs_free(mvi);
-	return NULL;
-}
-
-static u32 mvs_cr32(void __iomem *regs, u32 addr)
-{
-	mw32(CMD_ADDR, addr);
-	return mr32(CMD_DATA);
-}
-
-static void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
-{
-	mw32(CMD_ADDR, addr);
-	mw32(CMD_DATA, val);
-}
-
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
-{
-	void __iomem *regs = mvi->regs;
-	return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
-		mr32(P4_SER_CTLSTAT + (port - 4) * 4);
-}
-
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
-{
-	void __iomem *regs = mvi->regs;
-	if (port < 4)
-		mw32(P0_SER_CTLSTAT + port * 4, val);
-	else
-		mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
-}
-
-static u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
-{
-	void __iomem *regs = mvi->regs + off;
-	void __iomem *regs2 = mvi->regs + off2;
-	return (port < 4)?readl(regs + port * 8):
-		readl(regs2 + (port - 4) * 8);
-}
-
-static void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
-				u32 port, u32 val)
-{
-	void __iomem *regs = mvi->regs + off;
-	void __iomem *regs2 = mvi->regs + off2;
-	if (port < 4)
-		writel(val, regs + port * 8);
-	else
-		writel(val, regs2 + (port - 4) * 8);
-}
-
-static u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port);
-}
-
-static void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port, val);
-}
-
-static void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
-	mvs_write_port(mvi, MVS_P0_CFG_ADDR, MVS_P4_CFG_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port);
-}
-
-static void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port, val);
-}
-
-static void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
-	mvs_write_port(mvi, MVS_P0_VSR_ADDR, MVS_P4_VSR_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port);
-}
-
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port, val);
-}
-
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port);
-}
-
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port, val);
-}
-
-static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	/* workaround for SATA R-ERR, to ignore phy glitch */
-	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
-	tmp &= ~(1 << 9);
-	tmp |= (1 << 10);
-	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
-	/* enable retry 127 times */
-	mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
-
-	/* extend open frame timeout to max */
-	tmp = mvs_cr32(regs, CMD_SAS_CTL0);
-	tmp &= ~0xffff;
-	tmp |= 0x3fff;
-	mvs_cw32(regs, CMD_SAS_CTL0, tmp);
-
-	/* workaround for WDTIMEOUT , set to 550 ms */
-	mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
-
-	/* not to halt for different port op during wideport link change */
-	mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
-
-	/* workaround for Seagate disk not-found OOB sequence, recv
-	 * COMINIT before sending out COMWAKE */
-	tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
-	tmp &= 0x0000ffff;
-	tmp |= 0x00fa0000;
-	mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
-
-	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
-	tmp &= 0x1fffffff;
-	tmp |= (2U << 29);	/* 8 ms retry */
-	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
-	/* TEST - for phy decoding error, adjust voltage levels */
-	mw32(P0_VSR_ADDR + 0, 0x8);
-	mw32(P0_VSR_DATA + 0, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 8, 0x8);
-	mw32(P0_VSR_DATA + 8, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 16, 0x8);
-	mw32(P0_VSR_DATA + 16, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 24, 0x8);
-	mw32(P0_VSR_DATA + 24, 0x2F0);
-
-}
-
-static void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(PCS);
-	if (mvi->chip->n_phy <= 4)
-		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
-	else
-		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
-	mw32(PCS, tmp);
-}
-
-static void mvs_detect_porttype(struct mvs_info *mvi, int i)
-{
-	void __iomem *regs = mvi->regs;
-	u32 reg;
-	struct mvs_phy *phy = &mvi->phy[i];
-
-	/* TODO check & save device type */
-	reg = mr32(GBL_PORT_TYPE);
-
-	if (reg & MODE_SAS_SATA & (1 << i))
-		phy->phy_type |= PORT_TYPE_SAS;
-	else
-		phy->phy_type |= PORT_TYPE_SATA;
-}
-
-static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
-{
-	u32 *s = (u32 *) buf;
-
-	if (!s)
-		return NULL;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
-	s[3] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
-	s[2] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
-	s[1] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
-	s[0] = mvs_read_port_cfg_data(mvi, i);
-
-	return (void *)s;
-}
-
-static u32 mvs_is_sig_fis_received(u32 irq_status)
-{
-	return irq_status & PHYEV_SIG_FIS;
-}
-
-static void mvs_update_wideport(struct mvs_info *mvi, int i)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port = phy->port;
-	int j, no;
-
-	for_each_phy(port->wide_port_phymap, no, j, mvi->chip->n_phy)
-		if (no & 1) {
-			mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
-			mvs_write_port_cfg_data(mvi, no,
-						port->wide_port_phymap);
-		} else {
-			mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
-			mvs_write_port_cfg_data(mvi, no, 0);
-		}
-}
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
-{
-	u32 tmp;
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port = phy->port;;
-
-	tmp = mvs_read_phy_ctl(mvi, i);
-
-	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
-		if (!port)
-			phy->phy_attached = 1;
-		return tmp;
-	}
-
-	if (port) {
-		if (phy->phy_type & PORT_TYPE_SAS) {
-			port->wide_port_phymap &= ~(1U << i);
-			if (!port->wide_port_phymap)
-				port->port_attached = 0;
-			mvs_update_wideport(mvi, i);
-		} else if (phy->phy_type & PORT_TYPE_SATA)
-			port->port_attached = 0;
-		mvs_free_reg_set(mvi, phy->port);
-		phy->port = NULL;
-		phy->phy_attached = 0;
-		phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
-	}
-	return 0;
-}
-
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
-					int get_st)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct pci_dev *pdev = mvi->pdev;
-	u32 tmp;
-	u64 tmp64;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
-	phy->dev_info = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
-	phy->dev_sas_addr = (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
-	phy->dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
-	if (get_st) {
-		phy->irq_status = mvs_read_port_irq_stat(mvi, i);
-		phy->phy_status = mvs_is_phy_ready(mvi, i);
-	}
-
-	if (phy->phy_status) {
-		u32 phy_st;
-		struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
-		mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
-		phy_st = mvs_read_port_cfg_data(mvi, i);
-
-		sas_phy->linkrate =
-			(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
-				PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-		phy->minimum_linkrate =
-			(phy->phy_status &
-				PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
-		phy->maximum_linkrate =
-			(phy->phy_status &
-				PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
-
-		if (phy->phy_type & PORT_TYPE_SAS) {
-			/* Updated attached_sas_addr */
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
-			phy->att_dev_sas_addr =
-				(u64) mvs_read_port_cfg_data(mvi, i) << 32;
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
-			phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
-			phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
-			phy->identify.device_type =
-			    phy->att_dev_info & PORT_DEV_TYPE_MASK;
-
-			if (phy->identify.device_type == SAS_END_DEV)
-				phy->identify.target_port_protocols =
-							SAS_PROTOCOL_SSP;
-			else if (phy->identify.device_type != NO_DEVICE)
-				phy->identify.target_port_protocols =
-							SAS_PROTOCOL_SMP;
-			if (phy_st & PHY_OOB_DTCTD)
-				sas_phy->oob_mode = SAS_OOB_MODE;
-			phy->frame_rcvd_size =
-			    sizeof(struct sas_identify_frame);
-		} else if (phy->phy_type & PORT_TYPE_SATA) {
-			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
-			if (mvs_is_sig_fis_received(phy->irq_status)) {
-				phy->att_dev_sas_addr = i;	/* temp */
-				if (phy_st & PHY_OOB_DTCTD)
-					sas_phy->oob_mode = SATA_OOB_MODE;
-				phy->frame_rcvd_size =
-				    sizeof(struct dev_to_host_fis);
-				mvs_get_d2h_reg(mvi, i,
-						(void *)sas_phy->frame_rcvd);
-			} else {
-				dev_printk(KERN_DEBUG, &pdev->dev,
-					"No sig fis\n");
-				phy->phy_type &= ~(PORT_TYPE_SATA);
-				goto out_done;
-			}
-		}
-		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
-		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
-
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"phy[%d] Get Attached Address 0x%llX ,"
-			" SAS Address 0x%llX\n",
-			i,
-			(unsigned long long)phy->att_dev_sas_addr,
-			(unsigned long long)phy->dev_sas_addr);
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"Rate = %x , type = %d\n",
-			sas_phy->linkrate, phy->phy_type);
-
-		/* workaround for HW phy decoding error on 1.5g disk drive */
-		mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
-		tmp = mvs_read_port_vsr_data(mvi, i);
-		if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
-		     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
-			SAS_LINK_RATE_1_5_GBPS)
-			tmp &= ~PHY_MODE6_LATECLK;
-		else
-			tmp |= PHY_MODE6_LATECLK;
-		mvs_write_port_vsr_data(mvi, i, tmp);
-
-	}
-out_done:
-	if (get_st)
-		mvs_write_port_irq_stat(mvi, i, phy->irq_status);
-}
-
-static void mvs_port_formed(struct asd_sas_phy *sas_phy)
-{
-	struct sas_ha_struct *sas_ha = sas_phy->ha;
-	struct mvs_info *mvi = sas_ha->lldd_ha;
-	struct asd_sas_port *sas_port = sas_phy->port;
-	struct mvs_phy *phy = sas_phy->lldd_phy;
-	struct mvs_port *port = &mvi->port[sas_port->id];
-	unsigned long flags;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-	port->port_attached = 1;
-	phy->port = port;
-	port->taskfileset = MVS_ID_NOT_MAPPED;
-	if (phy->phy_type & PORT_TYPE_SAS) {
-		port->wide_port_phymap = sas_port->phy_mask;
-		mvs_update_wideport(mvi, sas_phy->id);
-	}
-	spin_unlock_irqrestore(&mvi->lock, flags);
-}
-
-static int mvs_I_T_nexus_reset(struct domain_device *dev)
-{
-	return TMF_RESP_FUNC_FAILED;
-}
-
-static int __devinit mvs_hw_init(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	int i;
-	u32 tmp, cctl;
-
-	/* make sure interrupts are masked immediately (paranoia) */
-	mw32(GBL_CTL, 0);
-	tmp = mr32(GBL_CTL);
-
-	/* Reset Controller */
-	if (!(tmp & HBA_RST)) {
-		if (mvi->flags & MVF_PHY_PWR_FIX) {
-			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
-			tmp &= ~PCTL_PWR_ON;
-			tmp |= PCTL_OFF;
-			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
-			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
-			tmp &= ~PCTL_PWR_ON;
-			tmp |= PCTL_OFF;
-			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-		}
-
-		/* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
-		mw32_f(GBL_CTL, HBA_RST);
-	}
-
-	/* wait for reset to finish; timeout is just a guess */
-	i = 1000;
-	while (i-- > 0) {
-		msleep(10);
-
-		if (!(mr32(GBL_CTL) & HBA_RST))
-			break;
-	}
-	if (mr32(GBL_CTL) & HBA_RST) {
-		dev_printk(KERN_ERR, &mvi->pdev->dev, "HBA reset failed\n");
-		return -EBUSY;
-	}
-
-	/* Init Chip */
-	/* make sure RST is set; HBA_RST /should/ have done that for us */
-	cctl = mr32(CTL);
-	if (cctl & CCTL_RST)
-		cctl &= ~CCTL_RST;
-	else
-		mw32_f(CTL, cctl | CCTL_RST);
-
-	/* write to device control _AND_ device status register? - A.C. */
-	pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
-	tmp &= ~PRD_REQ_MASK;
-	tmp |= PRD_REQ_SIZE;
-	pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
-
-	pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
-	tmp |= PCTL_PWR_ON;
-	tmp &= ~PCTL_OFF;
-	pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
-	pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
-	tmp |= PCTL_PWR_ON;
-	tmp &= ~PCTL_OFF;
-	pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-
-	mw32_f(CTL, cctl);
-
-	/* reset control */
-	mw32(PCS, 0);		/*MVS_PCS */
-
-	mvs_phy_hacks(mvi);
-
-	mw32(CMD_LIST_LO, mvi->slot_dma);
-	mw32(CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
-
-	mw32(RX_FIS_LO, mvi->rx_fis_dma);
-	mw32(RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
-
-	mw32(TX_CFG, MVS_CHIP_SLOT_SZ);
-	mw32(TX_LO, mvi->tx_dma);
-	mw32(TX_HI, (mvi->tx_dma >> 16) >> 16);
-
-	mw32(RX_CFG, MVS_RX_RING_SZ);
-	mw32(RX_LO, mvi->rx_dma);
-	mw32(RX_HI, (mvi->rx_dma >> 16) >> 16);
-
-	/* enable auto port detection */
-	mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
-	msleep(1100);
-	/* init and reset phys */
-	for (i = 0; i < mvi->chip->n_phy; i++) {
-		u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
-		u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
-
-		mvs_detect_porttype(mvi, i);
-
-		/* set phy local SAS address */
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
-		mvs_write_port_cfg_data(mvi, i, lo);
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
-		mvs_write_port_cfg_data(mvi, i, hi);
-
-		/* reset phy */
-		tmp = mvs_read_phy_ctl(mvi, i);
-		tmp |= PHY_RST;
-		mvs_write_phy_ctl(mvi, i, tmp);
-	}
-
-	msleep(100);
-
-	for (i = 0; i < mvi->chip->n_phy; i++) {
-		/* clear phy int status */
-		tmp = mvs_read_port_irq_stat(mvi, i);
-		tmp &= ~PHYEV_SIG_FIS;
-		mvs_write_port_irq_stat(mvi, i, tmp);
-
-		/* set phy int mask */
-		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
-			PHYEV_ID_DONE | PHYEV_DEC_ERR;
-		mvs_write_port_irq_mask(mvi, i, tmp);
-
-		msleep(100);
-		mvs_update_phyinfo(mvi, i, 1);
-		mvs_enable_xmt(mvi, i);
-	}
-
-	/* FIXME: update wide port bitmaps */
-
-	/* little endian for open address and command table, etc. */
-	/* A.C.
-	 * it seems that ( from the spec ) turning on big-endian won't
-	 * do us any good on big-endian machines, need further confirmation
-	 */
-	cctl = mr32(CTL);
-	cctl |= CCTL_ENDIAN_CMD;
-	cctl |= CCTL_ENDIAN_DATA;
-	cctl &= ~CCTL_ENDIAN_OPEN;
-	cctl |= CCTL_ENDIAN_RSP;
-	mw32_f(CTL, cctl);
-
-	/* reset CMD queue */
-	tmp = mr32(PCS);
-	tmp |= PCS_CMD_RST;
-	mw32(PCS, tmp);
-	/* interrupt coalescing may cause missing HW interrput in some case,
-	 * and the max count is 0x1ff, while our max slot is 0x200,
-	 * it will make count 0.
-	 */
-	tmp = 0;
-	mw32(INT_COAL, tmp);
-
-	tmp = 0x100;
-	mw32(INT_COAL_TMOUT, tmp);
-
-	/* ladies and gentlemen, start your engines */
-	mw32(TX_CFG, 0);
-	mw32(TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
-	mw32(RX_CFG, MVS_RX_RING_SZ | RX_EN);
-	/* enable CMD/CMPL_Q/RESP mode */
-	mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
-
-	/* enable completion queue interrupt */
-	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
-	mw32(INT_MASK, tmp);
-
-	/* Enable SRS interrupt */
-	mw32(INT_MASK_SRS, 0xFF);
-	return 0;
-}
-
-static void __devinit mvs_print_info(struct mvs_info *mvi)
-{
-	struct pci_dev *pdev = mvi->pdev;
-	static int printed_version;
-
-	if (!printed_version++)
-		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
-
-	dev_printk(KERN_INFO, &pdev->dev, "%u phys, addr %llx\n",
-		   mvi->chip->n_phy, SAS_ADDR(mvi->sas_addr));
-}
-
-static int __devinit mvs_pci_init(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
-{
-	int rc;
-	struct mvs_info *mvi;
-	irq_handler_t irq_handler = mvs_interrupt;
-
-	rc = pci_enable_device(pdev);
-	if (rc)
-		return rc;
-
-	pci_set_master(pdev);
-
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc)
-		goto err_out_disable;
-
-	rc = pci_go_64(pdev);
-	if (rc)
-		goto err_out_regions;
-
-	mvi = mvs_alloc(pdev, ent);
-	if (!mvi) {
-		rc = -ENOMEM;
-		goto err_out_regions;
-	}
-
-	rc = mvs_hw_init(mvi);
-	if (rc)
-		goto err_out_mvi;
-
-#ifndef MVS_DISABLE_MSI
-	if (!pci_enable_msi(pdev)) {
-		u32 tmp;
-		void __iomem *regs = mvi->regs;
-		mvi->flags |= MVF_MSI;
-		irq_handler = mvs_msi_interrupt;
-		tmp = mr32(PCS);
-		mw32(PCS, tmp | PCS_SELF_CLEAR);
-	}
-#endif
-
-	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
-	if (rc)
-		goto err_out_msi;
-
-	rc = scsi_add_host(mvi->shost, &pdev->dev);
-	if (rc)
-		goto err_out_irq;
-
-	rc = sas_register_ha(&mvi->sas);
-	if (rc)
-		goto err_out_shost;
-
-	pci_set_drvdata(pdev, mvi);
-
-	mvs_print_info(mvi);
-
-	mvs_hba_interrupt_enable(mvi);
-
-	scsi_scan_host(mvi->shost);
-
-	return 0;
-
-err_out_shost:
-	scsi_remove_host(mvi->shost);
-err_out_irq:
-	free_irq(pdev->irq, mvi);
-err_out_msi:
-	if (mvi->flags |= MVF_MSI)
-		pci_disable_msi(pdev);
-err_out_mvi:
-	mvs_free(mvi);
-err_out_regions:
-	pci_release_regions(pdev);
-err_out_disable:
-	pci_disable_device(pdev);
-	return rc;
-}
-
-static void __devexit mvs_pci_remove(struct pci_dev *pdev)
-{
-	struct mvs_info *mvi = pci_get_drvdata(pdev);
-
-	pci_set_drvdata(pdev, NULL);
-
-	if (mvi) {
-		sas_unregister_ha(&mvi->sas);
-		mvs_hba_interrupt_disable(mvi);
-		sas_remove_host(mvi->shost);
-		scsi_remove_host(mvi->shost);
-
-		free_irq(pdev->irq, mvi);
-		if (mvi->flags & MVF_MSI)
-			pci_disable_msi(pdev);
-		mvs_free(mvi);
-		pci_release_regions(pdev);
-	}
-	pci_disable_device(pdev);
-}
-
-static struct sas_domain_function_template mvs_transport_ops = {
-	.lldd_execute_task	= mvs_task_exec,
-	.lldd_control_phy	= mvs_phy_control,
-	.lldd_abort_task	= mvs_task_abort,
-	.lldd_port_formed	= mvs_port_formed,
-	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
-};
-
-static struct pci_device_id __devinitdata mvs_pci_table[] = {
-	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
-	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
-	{
-		.vendor 	= PCI_VENDOR_ID_MARVELL,
-		.device 	= 0x6440,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x6480,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_6480,
-	},
-	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
-	{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
-
-	{ }	/* terminate list */
-};
-
-static struct pci_driver mvs_pci_driver = {
-	.name		= DRV_NAME,
-	.id_table	= mvs_pci_table,
-	.probe		= mvs_pci_init,
-	.remove		= __devexit_p(mvs_pci_remove),
-};
-
-static int __init mvs_init(void)
-{
-	int rc;
-
-	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
-	if (!mvs_stt)
-		return -ENOMEM;
-
-	rc = pci_register_driver(&mvs_pci_driver);
-	if (rc)
-		goto err_out;
-
-	return 0;
-
-err_out:
-	sas_release_transport(mvs_stt);
-	return rc;
-}
-
-static void __exit mvs_exit(void)
-{
-	pci_unregister_driver(&mvs_pci_driver);
-	sas_release_transport(mvs_stt);
-}
-
-module_init(mvs_init);
-module_exit(mvs_exit);
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, mvs_pci_table);
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
new file mode 100644
index 00000000000..6de7af27e50
--- /dev/null
+++ b/drivers/scsi/mvsas/Kconfig
@@ -0,0 +1,42 @@
+#
+# Kernel configuration file for 88SE64XX/88SE94XX SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the 88SE64XX/88SE94XX driver.
+#
+# The 88SE64XX/88SE94XX driver is free software; you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The 88SE64XX/88SE94XX driver is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with 88SE64XX/88SE94XX Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+
+config SCSI_MVSAS
+	tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
+	depends on PCI
+	select SCSI_SAS_LIBSAS
+	select FW_LOADER
+	help
+		This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s
+		PCI-E 88SE94XX chip based host adapters.
+
+config SCSI_MVSAS_DEBUG
+	bool "Compile in debug mode"
+	default y
+	depends on SCSI_MVSAS
+	help
+		Compiles the 88SE64XX/88SE94XX driver in debug mode.  In debug mode,
+		the driver prints some messages to the console.
diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile
new file mode 100644
index 00000000000..52ac4264677
--- /dev/null
+++ b/drivers/scsi/mvsas/Makefile
@@ -0,0 +1,32 @@
+#
+# Makefile for Marvell 88SE64xx/88SE84xx SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y)
+	EXTRA_CFLAGS += -DMV_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
+mvsas-y +=  mv_init.o  \
+           mv_sas.o   \
+           mv_64xx.o  \
+           mv_94xx.o
diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c
new file mode 100644
index 00000000000..10a5077b6ae
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.c
@@ -0,0 +1,793 @@
+/*
+ * Marvell 88SE64xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+static void mvs_64xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+
+	/* TODO check & save device type */
+	reg = mr32(MVS_GBL_PORT_TYPE);
+	phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	if (reg & MODE_SAS_SATA & (1 << i))
+		phy->phy_type |= PORT_TYPE_SAS;
+	else
+		phy->phy_type |= PORT_TYPE_SATA;
+}
+
+static void __devinit mvs_64xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_PCS);
+	if (mvi->chip->n_phy <= 4)
+		tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT);
+	else
+		tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(MVS_PCS, tmp);
+}
+
+static void __devinit mvs_64xx_phy_hacks(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+
+	mvs_phy_hacks(mvi);
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		/* TEST - for phy decoding error, adjust voltage levels */
+		mw32(MVS_P0_VSR_ADDR + 0, 0x8);
+		mw32(MVS_P0_VSR_DATA + 0, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 8, 0x8);
+		mw32(MVS_P0_VSR_DATA + 8, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 16, 0x8);
+		mw32(MVS_P0_VSR_DATA + 16, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 24, 0x8);
+		mw32(MVS_P0_VSR_DATA + 24, 0x2F0);
+	} else {
+		int i;
+		/* disable auto port detection */
+		mw32(MVS_GBL_PORT_TYPE, 0);
+		for (i = 0; i < mvi->chip->n_phy; i++) {
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE7);
+			mvs_write_port_vsr_data(mvi, i, 0x90000000);
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE9);
+			mvs_write_port_vsr_data(mvi, i, 0x50f2);
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE11);
+			mvs_write_port_vsr_data(mvi, i, 0x0e);
+		}
+	}
+}
+
+static void mvs_64xx_stp_reset(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg, tmp;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		if (phy_id < 4)
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &reg);
+		else
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &reg);
+
+	} else
+		reg = mr32(MVS_PHY_CTL);
+
+	tmp = reg;
+	if (phy_id < 4)
+		tmp |= (1U << phy_id) << PCTL_LINK_OFFS;
+	else
+		tmp |= (1U << (phy_id - 4)) << PCTL_LINK_OFFS;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		if (phy_id < 4) {
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+			mdelay(10);
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, reg);
+		} else {
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+			mdelay(10);
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, reg);
+		}
+	} else {
+		mw32(MVS_PHY_CTL, tmp);
+		mdelay(10);
+		mw32(MVS_PHY_CTL, reg);
+	}
+}
+
+static void mvs_64xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+	u32 tmp;
+	tmp = mvs_read_port_irq_stat(mvi, phy_id);
+	tmp &= ~PHYEV_RDY_CH;
+	mvs_write_port_irq_stat(mvi, phy_id, tmp);
+	tmp = mvs_read_phy_ctl(mvi, phy_id);
+	if (hard)
+		tmp |= PHY_RST_HARD;
+	else
+		tmp |= PHY_RST;
+	mvs_write_phy_ctl(mvi, phy_id, tmp);
+	if (hard) {
+		do {
+			tmp = mvs_read_phy_ctl(mvi, phy_id);
+		} while (tmp & PHY_RST_HARD);
+	}
+}
+
+static int __devinit mvs_64xx_chip_reset(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	int i;
+
+	/* make sure interrupts are masked immediately (paranoia) */
+	mw32(MVS_GBL_CTL, 0);
+	tmp = mr32(MVS_GBL_CTL);
+
+	/* Reset Controller */
+	if (!(tmp & HBA_RST)) {
+		if (mvi->flags & MVF_PHY_PWR_FIX) {
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+			tmp &= ~PCTL_PWR_OFF;
+			tmp |= PCTL_PHY_DSBL;
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+			tmp &= ~PCTL_PWR_OFF;
+			tmp |= PCTL_PHY_DSBL;
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+		}
+	}
+
+	/* make sure interrupts are masked immediately (paranoia) */
+	mw32(MVS_GBL_CTL, 0);
+	tmp = mr32(MVS_GBL_CTL);
+
+	/* Reset Controller */
+	if (!(tmp & HBA_RST)) {
+		/* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
+		mw32_f(MVS_GBL_CTL, HBA_RST);
+	}
+
+	/* wait for reset to finish; timeout is just a guess */
+	i = 1000;
+	while (i-- > 0) {
+		msleep(10);
+
+		if (!(mr32(MVS_GBL_CTL) & HBA_RST))
+			break;
+	}
+	if (mr32(MVS_GBL_CTL) & HBA_RST) {
+		dev_printk(KERN_ERR, mvi->dev, "HBA reset failed\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static void mvs_64xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		u32 offs;
+		if (phy_id < 4)
+			offs = PCR_PHY_CTL;
+		else {
+			offs = PCR_PHY_CTL2;
+			phy_id -= 4;
+		}
+		pci_read_config_dword(mvi->pdev, offs, &tmp);
+		tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+		pci_write_config_dword(mvi->pdev, offs, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+		mw32(MVS_PHY_CTL, tmp);
+	}
+}
+
+static void mvs_64xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		u32 offs;
+		if (phy_id < 4)
+			offs = PCR_PHY_CTL;
+		else {
+			offs = PCR_PHY_CTL2;
+			phy_id -= 4;
+		}
+		pci_read_config_dword(mvi->pdev, offs, &tmp);
+		tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+		pci_write_config_dword(mvi->pdev, offs, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+		mw32(MVS_PHY_CTL, tmp);
+	}
+}
+
+static int __devinit mvs_64xx_init(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	int i;
+	u32 tmp, cctl;
+
+	if (mvi->pdev && mvi->pdev->revision == 0)
+		mvi->flags |= MVF_PHY_PWR_FIX;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		mvs_show_pcie_usage(mvi);
+		tmp = mvs_64xx_chip_reset(mvi);
+		if (tmp)
+			return tmp;
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_PHY_DSBL;
+		mw32(MVS_PHY_CTL, tmp);
+	}
+
+	/* Init Chip */
+	/* make sure RST is set; HBA_RST /should/ have done that for us */
+	cctl = mr32(MVS_CTL) & 0xFFFF;
+	if (cctl & CCTL_RST)
+		cctl &= ~CCTL_RST;
+	else
+		mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		/* write to device control _AND_ device status register */
+		pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
+		tmp &= ~PRD_REQ_MASK;
+		tmp |= PRD_REQ_SIZE;
+		pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
+
+		pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp &= ~PCTL_PHY_DSBL;
+		pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+		pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+		tmp &= PCTL_PWR_OFF;
+		tmp &= ~PCTL_PHY_DSBL;
+		pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_COM_ON;
+		tmp &= ~PCTL_PHY_DSBL;
+		tmp |= PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+		tmp &= ~PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+	}
+
+	/* reset control */
+	mw32(MVS_PCS, 0);		/* MVS_PCS */
+	/* init phys */
+	mvs_64xx_phy_hacks(mvi);
+
+	/* enable auto port detection */
+	mw32(MVS_GBL_PORT_TYPE, MODE_AUTO_DET_EN);
+
+	mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+	mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+	mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+	mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+	mw32(MVS_TX_LO, mvi->tx_dma);
+	mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+	mw32(MVS_RX_LO, mvi->rx_dma);
+	mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* set phy local SAS address */
+		/* should set little endian SAS address to 64xx chip */
+		mvs_set_sas_addr(mvi, i, PHYR_ADDR_LO, PHYR_ADDR_HI,
+				cpu_to_be64(mvi->phy[i].dev_sas_addr));
+
+		mvs_64xx_enable_xmt(mvi, i);
+
+		mvs_64xx_phy_reset(mvi, i, 1);
+		msleep(500);
+		mvs_64xx_detect_porttype(mvi, i);
+	}
+	if (mvi->flags & MVF_FLAG_SOC) {
+		/* set select registers */
+		writel(0x0E008000, regs + 0x000);
+		writel(0x59000008, regs + 0x004);
+		writel(0x20, regs + 0x008);
+		writel(0x20, regs + 0x00c);
+		writel(0x20, regs + 0x010);
+		writel(0x20, regs + 0x014);
+		writel(0x20, regs + 0x018);
+		writel(0x20, regs + 0x01c);
+	}
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* clear phy int status */
+		tmp = mvs_read_port_irq_stat(mvi, i);
+		tmp &= ~PHYEV_SIG_FIS;
+		mvs_write_port_irq_stat(mvi, i, tmp);
+
+		/* set phy int mask */
+		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
+			PHYEV_ID_DONE | PHYEV_DCDR_ERR | PHYEV_CRC_ERR |
+			PHYEV_DEC_ERR;
+		mvs_write_port_irq_mask(mvi, i, tmp);
+
+		msleep(100);
+		mvs_update_phyinfo(mvi, i, 1);
+	}
+
+	/* FIXME: update wide port bitmaps */
+
+	/* little endian for open address and command table, etc. */
+	/*
+	 * it seems that ( from the spec ) turning on big-endian won't
+	 * do us any good on big-endian machines, need further confirmation
+	 */
+	cctl = mr32(MVS_CTL);
+	cctl |= CCTL_ENDIAN_CMD;
+	cctl |= CCTL_ENDIAN_DATA;
+	cctl &= ~CCTL_ENDIAN_OPEN;
+	cctl |= CCTL_ENDIAN_RSP;
+	mw32_f(MVS_CTL, cctl);
+
+	/* reset CMD queue */
+	tmp = mr32(MVS_PCS);
+	tmp |= PCS_CMD_RST;
+	mw32(MVS_PCS, tmp);
+	/* interrupt coalescing may cause missing HW interrput in some case,
+	 * and the max count is 0x1ff, while our max slot is 0x200,
+	 * it will make count 0.
+	 */
+	tmp = 0;
+	mw32(MVS_INT_COAL, tmp);
+
+	tmp = 0x100;
+	mw32(MVS_INT_COAL_TMOUT, tmp);
+
+	/* ladies and gentlemen, start your engines */
+	mw32(MVS_TX_CFG, 0);
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+	/* enable CMD/CMPL_Q/RESP mode */
+	mw32(MVS_PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN |
+		PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+	/* enable completion queue interrupt */
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+		CINT_DMA_PCIE);
+
+	mw32(MVS_INT_MASK, tmp);
+
+	/* Enable SRS interrupt */
+	mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+	return 0;
+}
+
+static int mvs_64xx_ioremap(struct mvs_info *mvi)
+{
+	if (!mvs_ioremap(mvi, 4, 2))
+		return 0;
+	return -1;
+}
+
+static void mvs_64xx_iounmap(struct mvs_info *mvi)
+{
+	mvs_iounmap(mvi->regs);
+	mvs_iounmap(mvi->regs_ex);
+}
+
+static void mvs_64xx_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	mw32(MVS_GBL_CTL, tmp | INT_EN);
+}
+
+static void mvs_64xx_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	mw32(MVS_GBL_CTL, tmp & ~INT_EN);
+}
+
+static u32 mvs_64xx_isr_status(struct mvs_info *mvi, int irq)
+{
+	void __iomem *regs = mvi->regs;
+	u32 stat;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		stat = mr32(MVS_GBL_INT_STAT);
+
+		if (stat == 0 || stat == 0xffffffff)
+			return 0;
+	} else
+		stat = 1;
+	return stat;
+}
+
+static irqreturn_t mvs_64xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+	void __iomem *regs = mvi->regs;
+
+	/* clear CMD_CMPLT ASAP */
+	mw32_f(MVS_INT_STAT, CINT_DONE);
+#ifndef MVS_USE_TASKLET
+	spin_lock(&mvi->lock);
+#endif
+	mvs_int_full(mvi);
+#ifndef MVS_USE_TASKLET
+	spin_unlock(&mvi->lock);
+#endif
+	return IRQ_HANDLED;
+}
+
+static void mvs_64xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+	u32 tmp;
+	mvs_cw32(mvi, 0x40 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	mvs_cw32(mvi, 0x00 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x00 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x40 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_64xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	if (type == PORT_TYPE_SATA) {
+		tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	}
+	mw32(MVS_INT_STAT, CINT_CI_STOP);
+	tmp = mr32(MVS_PCS) | 0xFF00;
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_64xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, offs;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+	if (*tfs < 16) {
+		tmp = mr32(MVS_PCS);
+		mw32(MVS_PCS, tmp & ~offs);
+	} else {
+		tmp = mr32(MVS_CTL);
+		mw32(MVS_CTL, tmp & ~offs);
+	}
+
+	tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << *tfs);
+	if (tmp)
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+
+	*tfs = MVS_ID_NOT_MAPPED;
+	return;
+}
+
+static u8 mvs_64xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	int i;
+	u32 tmp, offs;
+	void __iomem *regs = mvi->regs;
+
+	if (*tfs != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	tmp = mr32(MVS_PCS);
+
+	for (i = 0; i < mvi->chip->srs_sz; i++) {
+		if (i == 16)
+			tmp = mr32(MVS_CTL);
+		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+		if (!(tmp & offs)) {
+			*tfs = i;
+
+			if (i < 16)
+				mw32(MVS_PCS, tmp | offs);
+			else
+				mw32(MVS_CTL, tmp | offs);
+			tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << i);
+			if (tmp)
+				mw32(MVS_INT_STAT_SRS_0, tmp);
+			return 0;
+		}
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+
+void mvs_64xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct mvs_prd *buf_prd = prd;
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd++;
+	}
+}
+
+static int mvs_64xx_oob_done(struct mvs_info *mvi, int i)
+{
+	u32 phy_st;
+	mvs_write_port_cfg_addr(mvi, i,
+			PHYR_PHY_STAT);
+	phy_st = mvs_read_port_cfg_data(mvi, i);
+	if (phy_st & PHY_OOB_DTCTD)
+		return 1;
+	return 0;
+}
+
+static void mvs_64xx_fix_phy_info(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id)
+
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	sas_phy->linkrate =
+		(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+			PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+
+	phy->minimum_linkrate =
+		(phy->phy_status &
+			PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+	phy->maximum_linkrate =
+		(phy->phy_status &
+			PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
+	phy->dev_info = mvs_read_port_cfg_data(mvi, i);
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
+	phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+	phy->att_dev_sas_addr =
+	     (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+	phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
+	phy->att_dev_sas_addr = SAS_ADDR(&phy->att_dev_sas_addr);
+}
+
+static void mvs_64xx_phy_work_around(struct mvs_info *mvi, int i)
+{
+	u32 tmp;
+	struct mvs_phy *phy = &mvi->phy[i];
+	/* workaround for HW phy decoding error on 1.5g disk drive */
+	mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
+	tmp = mvs_read_port_vsr_data(mvi, i);
+	if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+	     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
+		SAS_LINK_RATE_1_5_GBPS)
+		tmp &= ~PHY_MODE6_LATECLK;
+	else
+		tmp |= PHY_MODE6_LATECLK;
+	mvs_write_port_vsr_data(mvi, i, tmp);
+}
+
+void mvs_64xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+			struct sas_phy_linkrates *rates)
+{
+	u32 lrmin = 0, lrmax = 0;
+	u32 tmp;
+
+	tmp = mvs_read_phy_ctl(mvi, phy_id);
+	lrmin = (rates->minimum_linkrate << 8);
+	lrmax = (rates->maximum_linkrate << 12);
+
+	if (lrmin) {
+		tmp &= ~(0xf << 8);
+		tmp |= lrmin;
+	}
+	if (lrmax) {
+		tmp &= ~(0xf << 12);
+		tmp |= lrmax;
+	}
+	mvs_write_phy_ctl(mvi, phy_id, tmp);
+	mvs_64xx_phy_reset(mvi, phy_id, 1);
+}
+
+static void mvs_64xx_clear_active_cmds(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_PCS);
+	mw32(MVS_PCS, tmp & 0xFFFF);
+	mw32(MVS_PCS, tmp);
+	tmp = mr32(MVS_CTL);
+	mw32(MVS_CTL, tmp & 0xFFFF);
+	mw32(MVS_CTL, tmp);
+}
+
+
+u32 mvs_64xx_spi_read_data(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	return ior32(SPI_DATA_REG_64XX);
+}
+
+void mvs_64xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+	void __iomem *regs = mvi->regs_ex;
+	 iow32(SPI_DATA_REG_64XX, data);
+}
+
+
+int mvs_64xx_spi_buildcmd(struct mvs_info *mvi,
+			u32      *dwCmd,
+			u8       cmd,
+			u8       read,
+			u8       length,
+			u32      addr
+			)
+{
+	u32  dwTmp;
+
+	dwTmp = ((u32)cmd << 24) | ((u32)length << 19);
+	if (read)
+		dwTmp |= 1U<<23;
+
+	if (addr != MV_MAX_U32) {
+		dwTmp |= 1U<<22;
+		dwTmp |= (addr & 0x0003FFFF);
+	}
+
+	*dwCmd = dwTmp;
+	return 0;
+}
+
+
+int mvs_64xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+	void __iomem *regs = mvi->regs_ex;
+	int     retry;
+
+	for (retry = 0; retry < 1; retry++) {
+		iow32(SPI_CTRL_REG_64XX, SPI_CTRL_VENDOR_ENABLE);
+		iow32(SPI_CMD_REG_64XX, cmd);
+		iow32(SPI_CTRL_REG_64XX,
+			SPI_CTRL_VENDOR_ENABLE | SPI_CTRL_SPISTART);
+	}
+
+	return 0;
+}
+
+int mvs_64xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 i, dwTmp;
+
+	for (i = 0; i < timeout; i++) {
+		dwTmp = ior32(SPI_CTRL_REG_64XX);
+		if (!(dwTmp & SPI_CTRL_SPISTART))
+			return 0;
+		msleep(10);
+	}
+
+	return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_64xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+	int i;
+	struct mvs_prd *buf_prd = prd;
+	buf_prd	+= from;
+	for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+		buf_prd->addr = cpu_to_le64(buf_dma);
+		buf_prd->len = cpu_to_le32(buf_len);
+		++buf_prd;
+	}
+}
+#endif
+
+const struct mvs_dispatch mvs_64xx_dispatch = {
+	"mv64xx",
+	mvs_64xx_init,
+	NULL,
+	mvs_64xx_ioremap,
+	mvs_64xx_iounmap,
+	mvs_64xx_isr,
+	mvs_64xx_isr_status,
+	mvs_64xx_interrupt_enable,
+	mvs_64xx_interrupt_disable,
+	mvs_read_phy_ctl,
+	mvs_write_phy_ctl,
+	mvs_read_port_cfg_data,
+	mvs_write_port_cfg_data,
+	mvs_write_port_cfg_addr,
+	mvs_read_port_vsr_data,
+	mvs_write_port_vsr_data,
+	mvs_write_port_vsr_addr,
+	mvs_read_port_irq_stat,
+	mvs_write_port_irq_stat,
+	mvs_read_port_irq_mask,
+	mvs_write_port_irq_mask,
+	mvs_get_sas_addr,
+	mvs_64xx_command_active,
+	mvs_64xx_issue_stop,
+	mvs_start_delivery,
+	mvs_rx_update,
+	mvs_int_full,
+	mvs_64xx_assign_reg_set,
+	mvs_64xx_free_reg_set,
+	mvs_get_prd_size,
+	mvs_get_prd_count,
+	mvs_64xx_make_prd,
+	mvs_64xx_detect_porttype,
+	mvs_64xx_oob_done,
+	mvs_64xx_fix_phy_info,
+	mvs_64xx_phy_work_around,
+	mvs_64xx_phy_set_link_rate,
+	mvs_hw_max_link_rate,
+	mvs_64xx_phy_disable,
+	mvs_64xx_phy_enable,
+	mvs_64xx_phy_reset,
+	mvs_64xx_stp_reset,
+	mvs_64xx_clear_active_cmds,
+	mvs_64xx_spi_read_data,
+	mvs_64xx_spi_write_data,
+	mvs_64xx_spi_buildcmd,
+	mvs_64xx_spi_issuecmd,
+	mvs_64xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvs_64xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
new file mode 100644
index 00000000000..42e947d9795
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -0,0 +1,151 @@
+/*
+ * Marvell 88SE64xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_3_0_GBPS
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x200, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x204, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
+
+	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x230, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x234, /* Port4 config data */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
+	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_VSR_ADDR		= 0x250, /* port4 VSR addr */
+	MVS_P4_VSR_DATA		= 0x254, /* port4 VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0xE8,
+	PCR_LINK_STAT		= 0xF2,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01, /* phy tx */
+	VSR_PHY_MODE2		= 0x02, /* tx scc */
+	VSR_PHY_MODE3		= 0x03, /* pll */
+	VSR_PHY_MODE4		= 0x04, /* VCO */
+	VSR_PHY_MODE5		= 0x05, /* Rx */
+	VSR_PHY_MODE6		= 0x06, /* CDR */
+	VSR_PHY_MODE7		= 0x07, /* Impedance */
+	VSR_PHY_MODE8		= 0x08, /* Voltage */
+	VSR_PHY_MODE9		= 0x09, /* Test */
+	VSR_PHY_MODE10		= 0x0A, /* Power */
+	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+#define MAX_SG_ENTRY		64
+
+struct mvs_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	__le32			reserved;
+	__le32			len;		/* 16-bit length */
+};
+
+#define SPI_CTRL_REG				0xc0
+#define SPI_CTRL_VENDOR_ENABLE		(1U<<29)
+#define SPI_CTRL_SPIRDY         		(1U<<22)
+#define SPI_CTRL_SPISTART			(1U<<20)
+
+#define SPI_CMD_REG		0xc4
+#define SPI_DATA_REG		0xc8
+
+#define SPI_CTRL_REG_64XX		0x10
+#define SPI_CMD_REG_64XX		0x14
+#define SPI_DATA_REG_64XX		0x18
+
+#endif
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
new file mode 100644
index 00000000000..0940fae19d2
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -0,0 +1,672 @@
+/*
+ * Marvell 88SE94xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_94xx.h"
+#include "mv_chips.h"
+
+static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+	u32 phy_status;
+
+	mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE3);
+	reg = mvs_read_port_vsr_data(mvi, i);
+	phy_status = ((reg & 0x3f0000) >> 16) & 0xff;
+	phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	switch (phy_status) {
+	case 0x10:
+		phy->phy_type |= PORT_TYPE_SAS;
+		break;
+	case 0x1d:
+	default:
+		phy->phy_type |= PORT_TYPE_SATA;
+		break;
+	}
+}
+
+static void __devinit mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_PCS);
+	tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+	u32 tmp;
+
+	tmp = mvs_read_port_irq_stat(mvi, phy_id);
+	tmp &= ~PHYEV_RDY_CH;
+	mvs_write_port_irq_stat(mvi, phy_id, tmp);
+	if (hard) {
+		tmp = mvs_read_phy_ctl(mvi, phy_id);
+		tmp |= PHY_RST_HARD;
+		mvs_write_phy_ctl(mvi, phy_id, tmp);
+		do {
+			tmp = mvs_read_phy_ctl(mvi, phy_id);
+		} while (tmp & PHY_RST_HARD);
+	} else {
+		mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_STAT);
+		tmp = mvs_read_port_vsr_data(mvi, phy_id);
+		tmp |= PHY_RST;
+		mvs_write_port_vsr_data(mvi, phy_id, tmp);
+	}
+}
+
+static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+	u32 tmp;
+	mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+	tmp = mvs_read_port_vsr_data(mvi, phy_id);
+	mvs_write_port_vsr_data(mvi, phy_id, tmp | 0x00800000);
+}
+
+static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+	mvs_write_port_vsr_addr(mvi, phy_id, 0x1B4);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
+	mvs_write_port_vsr_addr(mvi, phy_id, 0x104);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x00018080);
+	mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x00207fff);
+}
+
+static int __devinit mvs_94xx_init(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	int i;
+	u32 tmp, cctl;
+
+	mvs_show_pcie_usage(mvi);
+	if (mvi->flags & MVF_FLAG_SOC) {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_PHY_DSBL;
+		mw32(MVS_PHY_CTL, tmp);
+	}
+
+	/* Init Chip */
+	/* make sure RST is set; HBA_RST /should/ have done that for us */
+	cctl = mr32(MVS_CTL) & 0xFFFF;
+	if (cctl & CCTL_RST)
+		cctl &= ~CCTL_RST;
+	else
+		mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+	if (mvi->flags & MVF_FLAG_SOC) {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_COM_ON;
+		tmp &= ~PCTL_PHY_DSBL;
+		tmp |= PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+		tmp &= ~PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+	}
+
+	/* reset control */
+	mw32(MVS_PCS, 0);		/* MVS_PCS */
+	mw32(MVS_STP_REG_SET_0, 0);
+	mw32(MVS_STP_REG_SET_1, 0);
+
+	/* init phys */
+	mvs_phy_hacks(mvi);
+
+	/* disable Multiplexing, enable phy implemented */
+	mw32(MVS_PORTS_IMP, 0xFF);
+
+
+	mw32(MVS_PA_VSR_ADDR, 0x00000104);
+	mw32(MVS_PA_VSR_PORT, 0x00018080);
+	mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE8);
+	mw32(MVS_PA_VSR_PORT, 0x0084ffff);
+
+	/* set LED blink when IO*/
+	mw32(MVS_PA_VSR_ADDR, 0x00000030);
+	tmp = mr32(MVS_PA_VSR_PORT);
+	tmp &= 0xFFFF00FF;
+	tmp |= 0x00003300;
+	mw32(MVS_PA_VSR_PORT, tmp);
+
+	mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+	mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+	mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+	mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+	mw32(MVS_TX_LO, mvi->tx_dma);
+	mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+	mw32(MVS_RX_LO, mvi->rx_dma);
+	mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvs_94xx_phy_disable(mvi, i);
+		/* set phy local SAS address */
+		mvs_set_sas_addr(mvi, i, CONFIG_ID_FRAME3, CONFIG_ID_FRAME4,
+						(mvi->phy[i].dev_sas_addr));
+
+		mvs_94xx_enable_xmt(mvi, i);
+		mvs_94xx_phy_enable(mvi, i);
+
+		mvs_94xx_phy_reset(mvi, i, 1);
+		msleep(500);
+		mvs_94xx_detect_porttype(mvi, i);
+	}
+
+	if (mvi->flags & MVF_FLAG_SOC) {
+		/* set select registers */
+		writel(0x0E008000, regs + 0x000);
+		writel(0x59000008, regs + 0x004);
+		writel(0x20, regs + 0x008);
+		writel(0x20, regs + 0x00c);
+		writel(0x20, regs + 0x010);
+		writel(0x20, regs + 0x014);
+		writel(0x20, regs + 0x018);
+		writel(0x20, regs + 0x01c);
+	}
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* clear phy int status */
+		tmp = mvs_read_port_irq_stat(mvi, i);
+		tmp &= ~PHYEV_SIG_FIS;
+		mvs_write_port_irq_stat(mvi, i, tmp);
+
+		/* set phy int mask */
+		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH |
+			PHYEV_ID_DONE  | PHYEV_DCDR_ERR | PHYEV_CRC_ERR ;
+		mvs_write_port_irq_mask(mvi, i, tmp);
+
+		msleep(100);
+		mvs_update_phyinfo(mvi, i, 1);
+	}
+
+	/* FIXME: update wide port bitmaps */
+
+	/* little endian for open address and command table, etc. */
+	/*
+	 * it seems that ( from the spec ) turning on big-endian won't
+	 * do us any good on big-endian machines, need further confirmation
+	 */
+	cctl = mr32(MVS_CTL);
+	cctl |= CCTL_ENDIAN_CMD;
+	cctl |= CCTL_ENDIAN_DATA;
+	cctl &= ~CCTL_ENDIAN_OPEN;
+	cctl |= CCTL_ENDIAN_RSP;
+	mw32_f(MVS_CTL, cctl);
+
+	/* reset CMD queue */
+	tmp = mr32(MVS_PCS);
+	tmp |= PCS_CMD_RST;
+	mw32(MVS_PCS, tmp);
+	/* interrupt coalescing may cause missing HW interrput in some case,
+	 * and the max count is 0x1ff, while our max slot is 0x200,
+	 * it will make count 0.
+	 */
+	tmp = 0;
+	mw32(MVS_INT_COAL, tmp);
+
+	tmp = 0x100;
+	mw32(MVS_INT_COAL_TMOUT, tmp);
+
+	/* ladies and gentlemen, start your engines */
+	mw32(MVS_TX_CFG, 0);
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+	/* enable CMD/CMPL_Q/RESP mode */
+	mw32(MVS_PCS, PCS_SATA_RETRY_2 | PCS_FIS_RX_EN |
+		PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+	/* enable completion queue interrupt */
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+		CINT_DMA_PCIE);
+	tmp |= CINT_PHY_MASK;
+	mw32(MVS_INT_MASK, tmp);
+
+	/* Enable SRS interrupt */
+	mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+	return 0;
+}
+
+static int mvs_94xx_ioremap(struct mvs_info *mvi)
+{
+	if (!mvs_ioremap(mvi, 2, -1)) {
+		mvi->regs_ex = mvi->regs + 0x10200;
+		mvi->regs += 0x20000;
+		if (mvi->id == 1)
+			mvi->regs += 0x4000;
+		return 0;
+	}
+	return -1;
+}
+
+static void mvs_94xx_iounmap(struct mvs_info *mvi)
+{
+	if (mvi->regs) {
+		mvi->regs -= 0x20000;
+		if (mvi->id == 1)
+			mvi->regs -= 0x4000;
+		mvs_iounmap(mvi->regs);
+	}
+}
+
+static void mvs_94xx_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	tmp |= (IRQ_SAS_A | IRQ_SAS_B);
+	mw32(MVS_GBL_INT_STAT, tmp);
+	writel(tmp, regs + 0x0C);
+	writel(tmp, regs + 0x10);
+	writel(tmp, regs + 0x14);
+	writel(tmp, regs + 0x18);
+	mw32(MVS_GBL_CTL, tmp);
+}
+
+static void mvs_94xx_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+
+	tmp &= ~(IRQ_SAS_A | IRQ_SAS_B);
+	mw32(MVS_GBL_INT_STAT, tmp);
+	writel(tmp, regs + 0x0C);
+	writel(tmp, regs + 0x10);
+	writel(tmp, regs + 0x14);
+	writel(tmp, regs + 0x18);
+	mw32(MVS_GBL_CTL, tmp);
+}
+
+static u32 mvs_94xx_isr_status(struct mvs_info *mvi, int irq)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 stat = 0;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		stat = mr32(MVS_GBL_INT_STAT);
+
+		if (!(stat & (IRQ_SAS_A | IRQ_SAS_B)))
+			return 0;
+	}
+	return stat;
+}
+
+static irqreturn_t mvs_94xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+	void __iomem *regs = mvi->regs;
+
+	if (((stat & IRQ_SAS_A) && mvi->id == 0) ||
+			((stat & IRQ_SAS_B) && mvi->id == 1)) {
+		mw32_f(MVS_INT_STAT, CINT_DONE);
+	#ifndef MVS_USE_TASKLET
+		spin_lock(&mvi->lock);
+	#endif
+		mvs_int_full(mvi);
+	#ifndef MVS_USE_TASKLET
+		spin_unlock(&mvi->lock);
+	#endif
+	}
+	return IRQ_HANDLED;
+}
+
+static void mvs_94xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+	u32 tmp;
+	mvs_cw32(mvi, 0x300 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x300 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_94xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	if (type == PORT_TYPE_SATA) {
+		tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	}
+	mw32(MVS_INT_STAT, CINT_CI_STOP);
+	tmp = mr32(MVS_PCS) | 0xFF00;
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	u8 reg_set = *tfs;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	mvi->sata_reg_set &= ~bit(reg_set);
+	if (reg_set < 32) {
+		w_reg_set_enable(reg_set, (u32)mvi->sata_reg_set);
+		tmp = mr32(MVS_INT_STAT_SRS_0) & (u32)mvi->sata_reg_set;
+		if (tmp)
+			mw32(MVS_INT_STAT_SRS_0, tmp);
+	} else {
+		w_reg_set_enable(reg_set, mvi->sata_reg_set);
+		tmp = mr32(MVS_INT_STAT_SRS_1) & mvi->sata_reg_set;
+		if (tmp)
+			mw32(MVS_INT_STAT_SRS_1, tmp);
+	}
+
+	*tfs = MVS_ID_NOT_MAPPED;
+
+	return;
+}
+
+static u8 mvs_94xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	int i;
+	void __iomem *regs = mvi->regs;
+
+	if (*tfs != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	i = mv_ffc64(mvi->sata_reg_set);
+	if (i > 32) {
+		mvi->sata_reg_set |= bit(i);
+		w_reg_set_enable(i, (u32)(mvi->sata_reg_set >> 32));
+		*tfs = i;
+		return 0;
+	} else if (i >= 0) {
+		mvi->sata_reg_set |= bit(i);
+		w_reg_set_enable(i, (u32)mvi->sata_reg_set);
+		*tfs = i;
+		return 0;
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+
+static void mvs_94xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct mvs_prd *buf_prd = prd;
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd++;
+	}
+}
+
+static int mvs_94xx_oob_done(struct mvs_info *mvi, int i)
+{
+	u32 phy_st;
+	phy_st = mvs_read_phy_ctl(mvi, i);
+	if (phy_st & PHY_READY_MASK)	/* phy ready */
+		return 1;
+	return 0;
+}
+
+static void mvs_94xx_get_dev_identify_frame(struct mvs_info *mvi, int port_id,
+					struct sas_identify_frame *id)
+{
+	int i;
+	u32 id_frame[7];
+
+	for (i = 0; i < 7; i++) {
+		mvs_write_port_cfg_addr(mvi, port_id,
+					CONFIG_ID_FRAME0 + i * 4);
+		id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+	}
+	memcpy(id, id_frame, 28);
+}
+
+static void mvs_94xx_get_att_identify_frame(struct mvs_info *mvi, int port_id,
+					struct sas_identify_frame *id)
+{
+	int i;
+	u32 id_frame[7];
+
+	/* mvs_hexdump(28, (u8 *)id_frame, 0); */
+	for (i = 0; i < 7; i++) {
+		mvs_write_port_cfg_addr(mvi, port_id,
+					CONFIG_ATT_ID_FRAME0 + i * 4);
+		id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+		mv_dprintk("94xx phy %d atta frame %d %x.\n",
+			port_id + mvi->id * mvi->chip->n_phy, i, id_frame[i]);
+	}
+	/* mvs_hexdump(28, (u8 *)id_frame, 0); */
+	memcpy(id, id_frame, 28);
+}
+
+static u32 mvs_94xx_make_dev_info(struct sas_identify_frame *id)
+{
+	u32 att_dev_info = 0;
+
+	att_dev_info |= id->dev_type;
+	if (id->stp_iport)
+		att_dev_info |= PORT_DEV_STP_INIT;
+	if (id->smp_iport)
+		att_dev_info |= PORT_DEV_SMP_INIT;
+	if (id->ssp_iport)
+		att_dev_info |= PORT_DEV_SSP_INIT;
+	if (id->stp_tport)
+		att_dev_info |= PORT_DEV_STP_TRGT;
+	if (id->smp_tport)
+		att_dev_info |= PORT_DEV_SMP_TRGT;
+	if (id->ssp_tport)
+		att_dev_info |= PORT_DEV_SSP_TRGT;
+
+	att_dev_info |= (u32)id->phy_id<<24;
+	return att_dev_info;
+}
+
+static u32 mvs_94xx_make_att_info(struct sas_identify_frame *id)
+{
+	return mvs_94xx_make_dev_info(id);
+}
+
+static void mvs_94xx_fix_phy_info(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	mv_dprintk("get all reg link rate is 0x%x\n", phy->phy_status);
+	sas_phy->linkrate =
+		(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+			PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+	sas_phy->linkrate += 0x8;
+	mv_dprintk("get link rate is %d\n", sas_phy->linkrate);
+	phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+	mvs_94xx_get_dev_identify_frame(mvi, i, id);
+	phy->dev_info = mvs_94xx_make_dev_info(id);
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		mvs_94xx_get_att_identify_frame(mvi, i, id);
+		phy->att_dev_info = mvs_94xx_make_att_info(id);
+		phy->att_dev_sas_addr = *(u64 *)id->sas_addr;
+	} else {
+		phy->att_dev_info = PORT_DEV_STP_TRGT | 1;
+	}
+
+}
+
+void mvs_94xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+			struct sas_phy_linkrates *rates)
+{
+	/* TODO */
+}
+
+static void mvs_94xx_clear_active_cmds(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_STP_REG_SET_0);
+	mw32(MVS_STP_REG_SET_0, 0);
+	mw32(MVS_STP_REG_SET_0, tmp);
+	tmp = mr32(MVS_STP_REG_SET_1);
+	mw32(MVS_STP_REG_SET_1, 0);
+	mw32(MVS_STP_REG_SET_1, tmp);
+}
+
+
+u32 mvs_94xx_spi_read_data(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	return mr32(SPI_RD_DATA_REG_94XX);
+}
+
+void mvs_94xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	 mw32(SPI_RD_DATA_REG_94XX, data);
+}
+
+
+int mvs_94xx_spi_buildcmd(struct mvs_info *mvi,
+				u32      *dwCmd,
+				u8       cmd,
+				u8       read,
+				u8       length,
+				u32      addr
+				)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	u32  dwTmp;
+
+	dwTmp = ((u32)cmd << 8) | ((u32)length << 4);
+	if (read)
+		dwTmp |= SPI_CTRL_READ_94XX;
+
+	if (addr != MV_MAX_U32) {
+		mw32(SPI_ADDR_REG_94XX, (addr & 0x0003FFFFL));
+		dwTmp |= SPI_ADDR_VLD_94XX;
+	}
+
+	*dwCmd = dwTmp;
+	return 0;
+}
+
+
+int mvs_94xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	mw32(SPI_CTRL_REG_94XX, cmd | SPI_CTRL_SpiStart_94XX);
+
+	return 0;
+}
+
+int mvs_94xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	u32   i, dwTmp;
+
+	for (i = 0; i < timeout; i++) {
+		dwTmp = mr32(SPI_CTRL_REG_94XX);
+		if (!(dwTmp & SPI_CTRL_SpiStart_94XX))
+			return 0;
+		msleep(10);
+	}
+
+	return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_94xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+	int i;
+	struct mvs_prd *buf_prd = prd;
+	buf_prd += from;
+	for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+		buf_prd->addr = cpu_to_le64(buf_dma);
+		buf_prd->im_len.len = cpu_to_le32(buf_len);
+		++buf_prd;
+	}
+}
+#endif
+
+const struct mvs_dispatch mvs_94xx_dispatch = {
+	"mv94xx",
+	mvs_94xx_init,
+	NULL,
+	mvs_94xx_ioremap,
+	mvs_94xx_iounmap,
+	mvs_94xx_isr,
+	mvs_94xx_isr_status,
+	mvs_94xx_interrupt_enable,
+	mvs_94xx_interrupt_disable,
+	mvs_read_phy_ctl,
+	mvs_write_phy_ctl,
+	mvs_read_port_cfg_data,
+	mvs_write_port_cfg_data,
+	mvs_write_port_cfg_addr,
+	mvs_read_port_vsr_data,
+	mvs_write_port_vsr_data,
+	mvs_write_port_vsr_addr,
+	mvs_read_port_irq_stat,
+	mvs_write_port_irq_stat,
+	mvs_read_port_irq_mask,
+	mvs_write_port_irq_mask,
+	mvs_get_sas_addr,
+	mvs_94xx_command_active,
+	mvs_94xx_issue_stop,
+	mvs_start_delivery,
+	mvs_rx_update,
+	mvs_int_full,
+	mvs_94xx_assign_reg_set,
+	mvs_94xx_free_reg_set,
+	mvs_get_prd_size,
+	mvs_get_prd_count,
+	mvs_94xx_make_prd,
+	mvs_94xx_detect_porttype,
+	mvs_94xx_oob_done,
+	mvs_94xx_fix_phy_info,
+	NULL,
+	mvs_94xx_phy_set_link_rate,
+	mvs_hw_max_link_rate,
+	mvs_94xx_phy_disable,
+	mvs_94xx_phy_enable,
+	mvs_94xx_phy_reset,
+	NULL,
+	mvs_94xx_clear_active_cmds,
+	mvs_94xx_spi_read_data,
+	mvs_94xx_spi_write_data,
+	mvs_94xx_spi_buildcmd,
+	mvs_94xx_spi_issuecmd,
+	mvs_94xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvs_94xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
new file mode 100644
index 00000000000..23ed9b16466
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -0,0 +1,222 @@
+/*
+ * Marvell 88SE94xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS94XX_REG_H_
+#define _MVS94XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_6_0_GBPS
+
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x00,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+	MVS_STP_REG_SET_0	= 0x118, /* STP/SATA Register Set Enable */
+	MVS_STP_REG_SET_1	= 0x11C,
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+	MVS_INT_STAT_SRS_1	= 0x160,
+	MVS_INT_MASK_SRS_1	= 0x164,
+	MVS_NON_NCQ_ERR_0	= 0x168, /* SRS Non-specific NCQ Error */
+	MVS_NON_NCQ_ERR_1	= 0x16C,
+	MVS_CMD_ADDR		= 0x170, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x174, /* Command register port (data) */
+	MVS_MEM_PARITY_ERR	= 0x178, /* Memory parity error */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x180, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x184, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x1A0, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x1A4, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x1D0, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x1E0, /* port4 serial control/status */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x200, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x204, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x220, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x224, /* Port4 config data */
+
+					 /* phys 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x250, /* phy0 VSR address */
+	MVS_P0_VSR_DATA		= 0x254, /* phy0 VSR data */
+					 /* phys 1-3 follow after this */
+					 /* multiplexing */
+	MVS_P4_VSR_ADDR 	= 0x250, /* phy4 VSR address */
+	MVS_P4_VSR_DATA 	= 0x254, /* phy4 VSR data */
+	MVS_PA_VSR_ADDR		= 0x290, /* All port VSR addr */
+	MVS_PA_VSR_PORT		= 0x294, /* All port VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0x78,
+	PCR_LINK_STAT		= 0x82,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00 * 4, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01 * 4, /* phy tx */
+	VSR_PHY_MODE2		= 0x02 * 4, /* tx scc */
+	VSR_PHY_MODE3		= 0x03 * 4, /* pll */
+	VSR_PHY_MODE4		= 0x04 * 4, /* VCO */
+	VSR_PHY_MODE5		= 0x05 * 4, /* Rx */
+	VSR_PHY_MODE6		= 0x06 * 4, /* CDR */
+	VSR_PHY_MODE7		= 0x07 * 4, /* Impedance */
+	VSR_PHY_MODE8		= 0x08 * 4, /* Voltage */
+	VSR_PHY_MODE9		= 0x09 * 4, /* Test */
+	VSR_PHY_MODE10		= 0x0A * 4, /* Power */
+	VSR_PHY_MODE11		= 0x0B * 4, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C * 4, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D * 4, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+enum pci_interrupt_cause {
+	/*  MAIN_IRQ_CAUSE (R10200) Bits*/
+	IRQ_COM_IN_I2O_IOP0            = (1 << 0),
+	IRQ_COM_IN_I2O_IOP1            = (1 << 1),
+	IRQ_COM_IN_I2O_IOP2            = (1 << 2),
+	IRQ_COM_IN_I2O_IOP3            = (1 << 3),
+	IRQ_COM_OUT_I2O_HOS0           = (1 << 4),
+	IRQ_COM_OUT_I2O_HOS1           = (1 << 5),
+	IRQ_COM_OUT_I2O_HOS2           = (1 << 6),
+	IRQ_COM_OUT_I2O_HOS3           = (1 << 7),
+	IRQ_PCIF_TO_CPU_DRBL0          = (1 << 8),
+	IRQ_PCIF_TO_CPU_DRBL1          = (1 << 9),
+	IRQ_PCIF_TO_CPU_DRBL2          = (1 << 10),
+	IRQ_PCIF_TO_CPU_DRBL3          = (1 << 11),
+	IRQ_PCIF_DRBL0                 = (1 << 12),
+	IRQ_PCIF_DRBL1                 = (1 << 13),
+	IRQ_PCIF_DRBL2                 = (1 << 14),
+	IRQ_PCIF_DRBL3                 = (1 << 15),
+	IRQ_XOR_A                      = (1 << 16),
+	IRQ_XOR_B                      = (1 << 17),
+	IRQ_SAS_A                      = (1 << 18),
+	IRQ_SAS_B                      = (1 << 19),
+	IRQ_CPU_CNTRL                  = (1 << 20),
+	IRQ_GPIO                       = (1 << 21),
+	IRQ_UART                       = (1 << 22),
+	IRQ_SPI                        = (1 << 23),
+	IRQ_I2C                        = (1 << 24),
+	IRQ_SGPIO                      = (1 << 25),
+	IRQ_COM_ERR                    = (1 << 29),
+	IRQ_I2O_ERR                    = (1 << 30),
+	IRQ_PCIE_ERR                   = (1 << 31),
+};
+
+#define MAX_SG_ENTRY		255
+
+struct mvs_prd_imt {
+	__le32			len:22;
+	u8			_r_a:2;
+	u8			misc_ctl:4;
+	u8			inter_sel:4;
+};
+
+struct mvs_prd {
+	/* 64-bit buffer address */
+	__le64			addr;
+	/* 22-bit length */
+	struct mvs_prd_imt	im_len;
+} __attribute__ ((packed));
+
+#define SPI_CTRL_REG_94XX           	0xc800
+#define SPI_ADDR_REG_94XX            	0xc804
+#define SPI_WR_DATA_REG_94XX         0xc808
+#define SPI_RD_DATA_REG_94XX         	0xc80c
+#define SPI_CTRL_READ_94XX         	(1U << 2)
+#define SPI_ADDR_VLD_94XX         	(1U << 1)
+#define SPI_CTRL_SpiStart_94XX     	(1U << 0)
+
+#define mv_ffc(x)   ffz(x)
+
+static inline int
+mv_ffc64(u64 v)
+{
+	int i;
+	i = mv_ffc((u32)v);
+	if (i >= 0)
+		return i;
+	i = mv_ffc((u32)(v>>32));
+
+	if (i != 0)
+		return 32 + i;
+
+	return -1;
+}
+
+#define r_reg_set_enable(i) \
+	(((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \
+	mr32(MVS_STP_REG_SET_0))
+
+#define w_reg_set_enable(i, tmp) \
+	(((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \
+	mw32(MVS_STP_REG_SET_0, tmp))
+
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+#endif
+
diff --git a/drivers/scsi/mvsas/mv_chips.h b/drivers/scsi/mvsas/mv_chips.h
new file mode 100644
index 00000000000..a67e1c4172f
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_chips.h
@@ -0,0 +1,280 @@
+/*
+ * Marvell 88SE64xx/88SE94xx register IO interface
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#ifndef _MV_CHIPS_H_
+#define _MV_CHIPS_H_
+
+#define mr32(reg)	readl(regs + reg)
+#define mw32(reg, val)	writel((val), regs + reg)
+#define mw32_f(reg, val)	do {			\
+				mw32(reg, val);	\
+				mr32(reg);	\
+			} while (0)
+
+#define iow32(reg, val) 	outl(val, (unsigned long)(regs + reg))
+#define ior32(reg) 		inl((unsigned long)(regs + reg))
+#define iow16(reg, val) 	outw((unsigned long)(val, regs + reg))
+#define ior16(reg) 		inw((unsigned long)(regs + reg))
+#define iow8(reg, val) 		outb((unsigned long)(val, regs + reg))
+#define ior8(reg) 		inb((unsigned long)(regs + reg))
+
+static inline u32 mvs_cr32(struct mvs_info *mvi, u32 addr)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_CMD_ADDR, addr);
+	return mr32(MVS_CMD_DATA);
+}
+
+static inline void mvs_cw32(struct mvs_info *mvi, u32 addr, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_CMD_ADDR, addr);
+	mw32(MVS_CMD_DATA, val);
+}
+
+static inline u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
+{
+	void __iomem *regs = mvi->regs;
+	return (port < 4) ? mr32(MVS_P0_SER_CTLSTAT + port * 4) :
+		mr32(MVS_P4_SER_CTLSTAT + (port - 4) * 4);
+}
+
+static inline void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	if (port < 4)
+		mw32(MVS_P0_SER_CTLSTAT + port * 4, val);
+	else
+		mw32(MVS_P4_SER_CTLSTAT + (port - 4) * 4, val);
+}
+
+static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off,
+				u32 off2, u32 port)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	return (port < 4) ? readl(regs + port * 8) :
+		readl(regs2 + (port - 4) * 8);
+}
+
+static inline void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
+				u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	if (port < 4)
+		writel(val, regs + port * 8);
+	else
+		writel(val, regs2 + (port - 4) * 8);
+}
+
+static inline u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port);
+}
+
+static inline void mvs_write_port_cfg_data(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port, val);
+}
+
+static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi,
+						u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_ADDR,
+			MVS_P4_CFG_ADDR, port, addr);
+	mdelay(10);
+}
+
+static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port);
+}
+
+static inline void mvs_write_port_vsr_data(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port, val);
+}
+
+static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi,
+						u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_ADDR,
+			MVS_P4_VSR_ADDR, port, addr);
+	mdelay(10);
+}
+
+static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port);
+}
+
+static inline void mvs_write_port_irq_stat(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port, val);
+}
+
+static inline u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port);
+
+}
+
+static inline void mvs_write_port_irq_mask(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port, val);
+}
+
+static inline void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+	u32 tmp;
+
+	/* workaround for SATA R-ERR, to ignore phy glitch */
+	tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+	tmp &= ~(1 << 9);
+	tmp |= (1 << 10);
+	mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+
+	/* enable retry 127 times */
+	mvs_cw32(mvi, CMD_SAS_CTL1, 0x7f7f);
+
+	/* extend open frame timeout to max */
+	tmp = mvs_cr32(mvi, CMD_SAS_CTL0);
+	tmp &= ~0xffff;
+	tmp |= 0x3fff;
+	mvs_cw32(mvi, CMD_SAS_CTL0, tmp);
+
+	/* workaround for WDTIMEOUT , set to 550 ms */
+	mvs_cw32(mvi, CMD_WD_TIMER, 0x7a0000);
+
+	/* not to halt for different port op during wideport link change */
+	mvs_cw32(mvi, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+	/* workaround for Seagate disk not-found OOB sequence, recv
+	 * COMINIT before sending out COMWAKE */
+	tmp = mvs_cr32(mvi, CMD_PHY_MODE_21);
+	tmp &= 0x0000ffff;
+	tmp |= 0x00fa0000;
+	mvs_cw32(mvi, CMD_PHY_MODE_21, tmp);
+
+	tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+	tmp &= 0x1fffffff;
+	tmp |= (2U << 29);	/* 8 ms retry */
+	mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+}
+
+static inline void mvs_int_sata(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_INT_STAT_SRS_0);
+	if (tmp)
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	MVS_CHIP_DISP->clear_active_cmds(mvi);
+}
+
+static inline void mvs_int_full(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, stat;
+	int i;
+
+	stat = mr32(MVS_INT_STAT);
+	mvs_int_rx(mvi, false);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
+		if (tmp)
+			mvs_int_port(mvi, i, tmp);
+	}
+
+	if (stat & CINT_SRS)
+		mvs_int_sata(mvi);
+
+	mw32(MVS_INT_STAT, stat);
+}
+
+static inline void mvs_start_delivery(struct mvs_info *mvi, u32 tx)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_TX_PROD_IDX, tx);
+}
+
+static inline u32 mvs_rx_update(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	return mr32(MVS_RX_CONS_IDX);
+}
+
+static inline u32 mvs_get_prd_size(void)
+{
+	return sizeof(struct mvs_prd);
+}
+
+static inline u32 mvs_get_prd_count(void)
+{
+	return MAX_SG_ENTRY;
+}
+
+static inline void mvs_show_pcie_usage(struct mvs_info *mvi)
+{
+	u16 link_stat, link_spd;
+	const char *spd[] = {
+		"UnKnown",
+		"2.5",
+		"5.0",
+	};
+	if (mvi->flags & MVF_FLAG_SOC || mvi->id > 0)
+		return;
+
+	pci_read_config_word(mvi->pdev, PCR_LINK_STAT, &link_stat);
+	link_spd = (link_stat & PLS_LINK_SPD) >> PLS_LINK_SPD_OFFS;
+	if (link_spd >= 3)
+		link_spd = 0;
+	dev_printk(KERN_INFO, mvi->dev,
+		"mvsas: PCI-E x%u, Bandwidth Usage: %s Gbps\n",
+	       (link_stat & PLS_NEG_LINK_WD) >> PLS_NEG_LINK_WD_OFFS,
+	       spd[link_spd]);
+}
+
+static inline u32 mvs_hw_max_link_rate(void)
+{
+	return MAX_LINK_RATE;
+}
+
+#endif  /* _MV_CHIPS_H_ */
+
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
new file mode 100644
index 00000000000..f8cb9defb96
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -0,0 +1,502 @@
+/*
+ * Marvell 88SE64xx/88SE94xx const head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_DEFS_H_
+#define _MV_DEFS_H_
+
+
+enum chip_flavors {
+	chip_6320,
+	chip_6440,
+	chip_6485,
+	chip_9480,
+	chip_9180,
+};
+
+/* driver compile-time configuration */
+enum driver_configuration {
+	MVS_SLOTS		= 512,	/* command slots */
+	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
+	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
+					/* software requires power-of-2
+					   ring size */
+	MVS_SOC_SLOTS		= 64,
+	MVS_SOC_TX_RING_SZ	= MVS_SOC_SLOTS * 2,
+	MVS_SOC_RX_RING_SZ	= MVS_SOC_SLOTS * 2,
+
+	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
+	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
+	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
+	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
+	MVS_QUEUE_SIZE	= 32,	/* Support Queue depth */
+	MVS_CAN_QUEUE		= MVS_SLOTS - 2,	/* SCSI Queue depth */
+	MVS_SOC_CAN_QUEUE	= MVS_SOC_SLOTS - 2,
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+	MVS_MAX_PHYS		= 8,	/* max. possible phys */
+	MVS_MAX_PORTS		= 8,	/* max. possible ports */
+	MVS_SOC_PHYS		= 4,	/* soc phys */
+	MVS_SOC_PORTS		= 4,	/* soc phys */
+	MVS_MAX_DEVICES	= 1024,	/* max supported device */
+};
+
+/* peripheral registers (BAR2) */
+enum peripheral_registers {
+	SPI_CTL			= 0x10,	/* EEPROM control */
+	SPI_CMD			= 0x14,	/* EEPROM command */
+	SPI_DATA		= 0x18, /* EEPROM data */
+};
+
+enum peripheral_register_bits {
+	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
+	TWSI_RD			= (1U << 4),	/* EEPROM read access */
+
+	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
+};
+
+enum hw_register_bits {
+	/* MVS_GBL_CTL */
+	INT_EN			= (1U << 1),	/* Global int enable */
+	HBA_RST			= (1U << 0),	/* HBA reset */
+
+	/* MVS_GBL_INT_STAT */
+	INT_XOR			= (1U << 4),	/* XOR engine event */
+	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
+
+	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
+	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
+	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
+	MODE_AUTO_DET_PORT6 = (1U << 14),
+	MODE_AUTO_DET_PORT5 = (1U << 13),
+	MODE_AUTO_DET_PORT4 = (1U << 12),
+	MODE_AUTO_DET_PORT3 = (1U << 11),
+	MODE_AUTO_DET_PORT2 = (1U << 10),
+	MODE_AUTO_DET_PORT1 = (1U << 9),
+	MODE_AUTO_DET_PORT0 = (1U << 8),
+	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
+				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
+				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
+				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
+	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
+	MODE_SAS_PORT6_MASK = (1U << 6),
+	MODE_SAS_PORT5_MASK = (1U << 5),
+	MODE_SAS_PORT4_MASK = (1U << 4),
+	MODE_SAS_PORT3_MASK = (1U << 3),
+	MODE_SAS_PORT2_MASK = (1U << 2),
+	MODE_SAS_PORT1_MASK = (1U << 1),
+	MODE_SAS_PORT0_MASK = (1U << 0),
+	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
+				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
+				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
+				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
+
+				/* SAS_MODE value may be
+				 * dictated (in hw) by values
+				 * of SATA_TARGET & AUTO_DET
+				 */
+
+	/* MVS_TX_CFG */
+	TX_EN			= (1U << 16),	/* Enable TX */
+	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
+
+	/* MVS_RX_CFG */
+	RX_EN			= (1U << 16),	/* Enable RX */
+	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
+
+	/* MVS_INT_COAL */
+	COAL_EN			= (1U << 16),	/* Enable int coalescing */
+
+	/* MVS_INT_STAT, MVS_INT_MASK */
+	CINT_I2C		= (1U << 31),	/* I2C event */
+	CINT_SW0		= (1U << 30),	/* software event 0 */
+	CINT_SW1		= (1U << 29),	/* software event 1 */
+	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
+	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
+	CINT_MEM		= (1U << 26),	/* int mem parity err */
+	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
+	CINT_SRS		= (1U << 3),	/* SRS event */
+	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
+	CINT_DONE		= (1U << 0),	/* cmd completion */
+
+						/* shl for ports 1-3 */
+	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
+	CINT_PORT		= (1U << 8),	/* port0 event */
+	CINT_PORT_MASK_OFFSET	= 8,
+	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
+	CINT_PHY_MASK_OFFSET	= 4,
+	CINT_PHY_MASK		= (0x0F << CINT_PHY_MASK_OFFSET),
+
+	/* TX (delivery) ring bits */
+	TXQ_CMD_SHIFT		= 29,
+	TXQ_CMD_SSP		= 1,		/* SSP protocol */
+	TXQ_CMD_SMP		= 2,		/* SMP protocol */
+	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
+	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
+	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
+	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
+	TXQ_MODE_TARGET 	= 0,
+	TXQ_MODE_INITIATOR	= 1,
+	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
+	TXQ_PRI_NORMAL		= 0,
+	TXQ_PRI_HIGH		= 1,
+	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
+	TXQ_SRS_MASK		= 0x7f,
+	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
+	TXQ_PHY_MASK		= 0xff,
+	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* RX (completion) ring bits */
+	RXQ_GOOD		= (1U << 23),	/* Response good */
+	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
+	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
+	RXQ_ATTN		= (1U << 19),	/* attention */
+	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
+	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
+	RXQ_DONE		= (1U << 16),	/* cmd complete */
+	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* mvs_cmd_hdr bits */
+	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
+	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
+
+						/* SSP initiator only */
+	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
+
+						/* SSP initiator or target */
+	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
+
+						/* SSP target only */
+	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
+	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
+	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
+	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
+
+	MCH_SSP_MODE_PASSTHRU	= 1,
+	MCH_SSP_MODE_NORMAL	= 0,
+	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
+	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
+	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
+	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
+	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
+	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
+	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
+	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
+	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
+	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
+
+	CCTL_RST		= (1U << 5),	/* port logic reset */
+
+						/* 0(LSB first), 1(MSB first) */
+	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
+	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
+	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
+	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
+
+	/* MVS_Px_SER_CTLSTAT (per-phy control) */
+	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
+	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
+	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
+	PHY_RST			= (1U << 0),	/* phy reset */
+	PHY_READY_MASK		= (1U << 20),
+
+	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
+	PHYEV_DCDR_ERR		= (1U << 23),	/* STP Deocder Error */
+	PHYEV_CRC_ERR		= (1U << 22),	/* STP CRC Error */
+	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
+	PHYEV_AN		= (1U << 18),	/* SATA async notification */
+	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
+	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
+	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
+	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
+	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
+	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
+	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
+	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
+	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
+	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
+	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
+	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
+	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
+	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
+	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
+
+	/* MVS_PCS */
+	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
+	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
+	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6485 */
+	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
+	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
+	PCS_SATA_RETRY_2	= (1U << 6),	/* For 9180 */
+	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
+	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
+	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
+	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
+	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
+
+	/* Port n Attached Device Info */
+	PORT_DEV_SSP_TRGT	= (1U << 19),
+	PORT_DEV_SMP_TRGT	= (1U << 18),
+	PORT_DEV_STP_TRGT	= (1U << 17),
+	PORT_DEV_SSP_INIT	= (1U << 11),
+	PORT_DEV_SMP_INIT	= (1U << 10),
+	PORT_DEV_STP_INIT	= (1U << 9),
+	PORT_PHY_ID_MASK	= (0xFFU << 24),
+	PORT_SSP_TRGT_MASK	= (0x1U << 19),
+	PORT_SSP_INIT_MASK	= (0x1U << 11),
+	PORT_DEV_TRGT_MASK	= (0x7U << 17),
+	PORT_DEV_INIT_MASK	= (0x7U << 9),
+	PORT_DEV_TYPE_MASK	= (0x7U << 0),
+
+	/* Port n PHY Status */
+	PHY_RDY			= (1U << 2),
+	PHY_DW_SYNC		= (1U << 1),
+	PHY_OOB_DTCTD		= (1U << 0),
+
+	/* VSR */
+	/* PHYMODE 6 (CDB) */
+	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
+	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
+	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
+	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
+	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
+	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
+	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
+	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
+	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
+	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
+	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
+	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
+	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
+	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
+	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
+	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
+	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
+	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
+	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
+	PHYR_SATA_CTL		= 0x18,	/* SATA control */
+	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
+	PHYR_SATA_SIG0	= 0x20,	/*port SATA signature FIS(Byte 0-3) */
+	PHYR_SATA_SIG1	= 0x24,	/*port SATA signature FIS(Byte 4-7) */
+	PHYR_SATA_SIG2	= 0x28,	/*port SATA signature FIS(Byte 8-11) */
+	PHYR_SATA_SIG3	= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
+	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
+	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
+	PHYR_WIDE_PORT	= 0x38,	/* wide port participating */
+	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
+	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
+	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
+	CONFIG_ID_FRAME0       = 0x100, /* Port device ID frame register 0 */
+	CONFIG_ID_FRAME1       = 0x104, /* Port device ID frame register 1 */
+	CONFIG_ID_FRAME2       = 0x108, /* Port device ID frame register 2 */
+	CONFIG_ID_FRAME3       = 0x10c, /* Port device ID frame register 3 */
+	CONFIG_ID_FRAME4       = 0x110, /* Port device ID frame register 4 */
+	CONFIG_ID_FRAME5       = 0x114, /* Port device ID frame register 5 */
+	CONFIG_ID_FRAME6       = 0x118, /* Port device ID frame register 6 */
+	CONFIG_ATT_ID_FRAME0   = 0x11c, /* attached ID frame register 0 */
+	CONFIG_ATT_ID_FRAME1   = 0x120, /* attached ID frame register 1 */
+	CONFIG_ATT_ID_FRAME2   = 0x124, /* attached ID frame register 2 */
+	CONFIG_ATT_ID_FRAME3   = 0x128, /* attached ID frame register 3 */
+	CONFIG_ATT_ID_FRAME4   = 0x12c, /* attached ID frame register 4 */
+	CONFIG_ATT_ID_FRAME5   = 0x130, /* attached ID frame register 5 */
+	CONFIG_ATT_ID_FRAME6   = 0x134, /* attached ID frame register 6 */
+};
+
+enum sas_cmd_port_registers {
+	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
+	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
+	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
+	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
+	CMD_OOB_SPACE	= 0x110, /* OOB space control register */
+	CMD_OOB_BURST	= 0x114, /* OOB burst control register */
+	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
+	CMD_PHY_CONFIG0	= 0x11c, /* PHY config register 0 */
+	CMD_PHY_CONFIG1	= 0x120, /* PHY config register 1 */
+	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
+	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
+	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
+	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
+	CMD_ID_TEST		= 0x134, /* ID test register */
+	CMD_PL_TIMER		= 0x138, /* PL timer register */
+	CMD_WD_TIMER		= 0x13c, /* WD timer register */
+	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
+	CMD_APP_MEM_CTL	= 0x144, /* Application Memory Control */
+	CMD_XOR_MEM_CTL	= 0x148, /* XOR Block Memory Control */
+	CMD_DMA_MEM_CTL	= 0x14c, /* DMA Block Memory Control */
+	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
+	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
+	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
+	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
+	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
+	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
+	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
+	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
+	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
+	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
+	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
+	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
+	CMD_RESET_COUNT		= 0x188, /* Reset Count */
+	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
+	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
+	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
+	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
+	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
+	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
+	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
+	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
+	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
+	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
+	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
+	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
+	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
+	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
+	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
+};
+
+enum mvs_info_flags {
+	MVF_MSI		= (1U << 0),	/* MSI is enabled */
+	MVF_PHY_PWR_FIX	= (1U << 1),	/* bug workaround */
+	MVF_FLAG_SOC		= (1U << 2),	/* SoC integrated controllers */
+};
+
+enum mvs_event_flags {
+	PHY_PLUG_EVENT	= (3U),
+	PHY_PLUG_IN		= (1U << 0),	/* phy plug in */
+	PHY_PLUG_OUT		= (1U << 1),	/* phy plug out */
+};
+
+enum mvs_port_type {
+	PORT_TGT_MASK	=  (1U << 5),
+	PORT_INIT_PORT	=  (1U << 4),
+	PORT_TGT_PORT	=  (1U << 3),
+	PORT_INIT_TGT_PORT = (PORT_INIT_PORT | PORT_TGT_PORT),
+	PORT_TYPE_SAS	=  (1U << 1),
+	PORT_TYPE_SATA	=  (1U << 0),
+};
+
+/* Command Table Format */
+enum ct_format {
+	/* SSP */
+	SSP_F_H		=  0x00,
+	SSP_F_IU	=  0x18,
+	SSP_F_MAX	=  0x4D,
+	/* STP */
+	STP_CMD_FIS	=  0x00,
+	STP_ATAPI_CMD	=  0x40,
+	STP_F_MAX	=  0x10,
+	/* SMP */
+	SMP_F_T		=  0x00,
+	SMP_F_DEP	=  0x01,
+	SMP_F_MAX	=  0x101,
+};
+
+enum status_buffer {
+	SB_EIR_OFF	=  0x00,	/* Error Information Record */
+	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
+	SB_RFB_MAX	=  0x400,	/* RFB size*/
+};
+
+enum error_info_rec {
+	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
+	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
+	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
+	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
+	UNK_FIS 	= (1U << 27),	/* unknown FIS */
+	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
+	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
+	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
+	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
+	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
+	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
+	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
+	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
+	INTERLOCK	= (1U << 15),	/* interlock error */
+	NAK		= (1U << 14),	/* NAK rx'd */
+	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
+	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
+	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
+	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
+	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
+	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
+	BREAK		= (1U << 7),	/* break received */
+	BAD_DEST	= (1U << 6),	/* bad destination */
+	BAD_PROTO	= (1U << 5),	/* protocol not supported */
+	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
+	WRONG_DEST	= (1U << 3),	/* wrong destination error */
+	CREDIT_TO	= (1U << 2),	/* credit timeout */
+	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
+	BUF_PAR 	= (1U << 0),	/* buffer parity error */
+};
+
+enum error_info_rec_2 {
+	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
+	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
+	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
+	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
+	USR_BLK_NM	= (1U << 0),	/* User Block Number */
+};
+
+enum pci_cfg_register_bits {
+	PCTL_PWR_OFF	= (0xFU << 24),
+	PCTL_COM_ON	= (0xFU << 20),
+	PCTL_LINK_RST	= (0xFU << 16),
+	PCTL_LINK_OFFS	= (16),
+	PCTL_PHY_DSBL	= (0xFU << 12),
+	PCTL_PHY_DSBL_OFFS	= (12),
+	PRD_REQ_SIZE	= (0x4000),
+	PRD_REQ_MASK	= (0x00007000),
+	PLS_NEG_LINK_WD		= (0x3FU << 4),
+	PLS_NEG_LINK_WD_OFFS	= 4,
+	PLS_LINK_SPD		= (0x0FU << 0),
+	PLS_LINK_SPD_OFFS	= 0,
+};
+
+enum open_frame_protocol {
+	PROTOCOL_SMP	= 0x0,
+	PROTOCOL_SSP	= 0x1,
+	PROTOCOL_STP	= 0x2,
+};
+
+/* define for response frame datapres field */
+enum datapres_field {
+	NO_DATA		= 0,
+	RESPONSE_DATA	= 1,
+	SENSE_DATA	= 2,
+};
+
+/* define task management IU */
+struct mvs_tmf_task{
+	u8 tmf;
+	u16 tag_of_task_to_be_managed;
+};
+#endif
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
new file mode 100644
index 00000000000..8646a19f999
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -0,0 +1,703 @@
+/*
+ * Marvell 88SE64xx/88SE94xx pci init
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#include "mv_sas.h"
+
+static struct scsi_transport_template *mvs_stt;
+static const struct mvs_chip_info mvs_chips[] = {
+	[chip_6320] =	{ 1, 2, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_6440] =	{ 1, 4, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_6485] =	{ 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
+	[chip_9180] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+	[chip_9480] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+};
+
+#define SOC_SAS_NUM 2
+
+static struct scsi_host_template mvs_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= mvs_slave_configure,
+	.slave_destroy		= sas_slave_destroy,
+	.scan_finished		= mvs_scan_finished,
+	.scan_start		= mvs_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.change_queue_type	= sas_change_queue_type,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.cmd_per_lun		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler	= sas_eh_device_reset_handler,
+	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
+	.slave_alloc		= mvs_slave_alloc,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+};
+
+static struct sas_domain_function_template mvs_transport_ops = {
+	.lldd_dev_found 	= mvs_dev_found,
+	.lldd_dev_gone	= mvs_dev_gone,
+
+	.lldd_execute_task	= mvs_queue_command,
+	.lldd_control_phy	= mvs_phy_control,
+
+	.lldd_abort_task	= mvs_abort_task,
+	.lldd_abort_task_set    = mvs_abort_task_set,
+	.lldd_clear_aca         = mvs_clear_aca,
+       .lldd_clear_task_set    = mvs_clear_task_set,
+	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
+	.lldd_lu_reset 		= mvs_lu_reset,
+	.lldd_query_task	= mvs_query_task,
+
+	.lldd_port_formed	= mvs_port_formed,
+	.lldd_port_deformed     = mvs_port_deformed,
+
+};
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+	struct mvs_phy *phy = &mvi->phy[phy_id];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	phy->mvi = mvi;
+	init_timer(&phy->timer);
+	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+	sas_phy->class = SAS;
+	sas_phy->iproto = SAS_PROTOCOL_ALL;
+	sas_phy->tproto = 0;
+	sas_phy->type = PHY_TYPE_PHYSICAL;
+	sas_phy->role = PHY_ROLE_INITIATOR;
+	sas_phy->oob_mode = OOB_NOT_CONNECTED;
+	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+	sas_phy->id = phy_id;
+	sas_phy->sas_addr = &mvi->sas_addr[0];
+	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+	sas_phy->ha = (struct sas_ha_struct *)mvi->shost->hostdata;
+	sas_phy->lldd_phy = phy;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+	int i;
+	struct mvs_wq *mwq;
+	int slot_nr;
+
+	if (!mvi)
+		return;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		slot_nr = MVS_SOC_SLOTS;
+	else
+		slot_nr = MVS_SLOTS;
+
+	for (i = 0; i < mvi->tags_num; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+		if (slot->buf)
+			dma_free_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+					  slot->buf, slot->buf_dma);
+	}
+
+	if (mvi->tx)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				  mvi->tx, mvi->tx_dma);
+	if (mvi->rx_fis)
+		dma_free_coherent(mvi->dev, MVS_RX_FISL_SZ,
+				  mvi->rx_fis, mvi->rx_fis_dma);
+	if (mvi->rx)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				  mvi->rx, mvi->rx_dma);
+	if (mvi->slot)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->slot) * slot_nr,
+				  mvi->slot, mvi->slot_dma);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (mvi->bulk_buffer)
+		dma_free_coherent(mvi->dev, TRASH_BUCKET_SIZE,
+				  mvi->bulk_buffer, mvi->bulk_buffer_dma);
+#endif
+
+	MVS_CHIP_DISP->chip_iounmap(mvi);
+	if (mvi->shost)
+		scsi_host_put(mvi->shost);
+	list_for_each_entry(mwq, &mvi->wq_list, entry)
+		cancel_delayed_work(&mwq->work_q);
+	kfree(mvi);
+}
+
+#ifdef MVS_USE_TASKLET
+struct tasklet_struct	mv_tasklet;
+static void mvs_tasklet(unsigned long opaque)
+{
+	unsigned long flags;
+	u32 stat;
+	u16 core_nr, i = 0;
+
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = (struct sas_ha_struct *)opaque;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+	if (unlikely(!mvi))
+		BUG_ON(1);
+
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		stat = MVS_CHIP_DISP->isr_status(mvi, mvi->irq);
+		if (stat)
+			MVS_CHIP_DISP->isr(mvi, mvi->irq, stat);
+	}
+
+}
+#endif
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque)
+{
+	u32 core_nr, i = 0;
+	u32 stat;
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = opaque;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+	if (unlikely(!mvi))
+		return IRQ_NONE;
+
+	stat = MVS_CHIP_DISP->isr_status(mvi, irq);
+	if (!stat)
+		return IRQ_NONE;
+
+#ifdef MVS_USE_TASKLET
+	tasklet_schedule(&mv_tasklet);
+#else
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		MVS_CHIP_DISP->isr(mvi, irq, stat);
+	}
+#endif
+	return IRQ_HANDLED;
+}
+
+static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
+{
+	int i, slot_nr;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		slot_nr = MVS_SOC_SLOTS;
+	else
+		slot_nr = MVS_SLOTS;
+
+	spin_lock_init(&mvi->lock);
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvs_phy_init(mvi, i);
+		mvi->port[i].wide_port_phymap = 0;
+		mvi->port[i].port_attached = 0;
+		INIT_LIST_HEAD(&mvi->port[i].list);
+	}
+	for (i = 0; i < MVS_MAX_DEVICES; i++) {
+		mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED;
+		mvi->devices[i].dev_type = NO_DEVICE;
+		mvi->devices[i].device_id = i;
+		mvi->devices[i].dev_status = MVS_DEV_NORMAL;
+	}
+
+	/*
+	 * alloc and init our DMA areas
+	 */
+	mvi->tx = dma_alloc_coherent(mvi->dev,
+				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				     &mvi->tx_dma, GFP_KERNEL);
+	if (!mvi->tx)
+		goto err_out;
+	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
+	mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
+					 &mvi->rx_fis_dma, GFP_KERNEL);
+	if (!mvi->rx_fis)
+		goto err_out;
+	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+	mvi->rx = dma_alloc_coherent(mvi->dev,
+				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				     &mvi->rx_dma, GFP_KERNEL);
+	if (!mvi->rx)
+		goto err_out;
+	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
+	mvi->rx[0] = cpu_to_le32(0xfff);
+	mvi->rx_cons = 0xfff;
+
+	mvi->slot = dma_alloc_coherent(mvi->dev,
+				       sizeof(*mvi->slot) * slot_nr,
+				       &mvi->slot_dma, GFP_KERNEL);
+	if (!mvi->slot)
+		goto err_out;
+	memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvi->bulk_buffer = dma_alloc_coherent(mvi->dev,
+				       TRASH_BUCKET_SIZE,
+				       &mvi->bulk_buffer_dma, GFP_KERNEL);
+	if (!mvi->bulk_buffer)
+		goto err_out;
+#endif
+	for (i = 0; i < slot_nr; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+		slot->buf = dma_alloc_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+					       &slot->buf_dma, GFP_KERNEL);
+		if (!slot->buf) {
+			printk(KERN_DEBUG"failed to allocate slot->buf.\n");
+			goto err_out;
+		}
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+		++mvi->tags_num;
+	}
+	/* Initialize tags */
+	mvs_tag_init(mvi);
+	return 0;
+err_out:
+	return 1;
+}
+
+
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex)
+{
+	unsigned long res_start, res_len, res_flag, res_flag_ex = 0;
+	struct pci_dev *pdev = mvi->pdev;
+	if (bar_ex != -1) {
+		/*
+		 * ioremap main and peripheral registers
+		 */
+		res_start = pci_resource_start(pdev, bar_ex);
+		res_len = pci_resource_len(pdev, bar_ex);
+		if (!res_start || !res_len)
+			goto err_out;
+
+		res_flag_ex = pci_resource_flags(pdev, bar_ex);
+		if (res_flag_ex & IORESOURCE_MEM) {
+			if (res_flag_ex & IORESOURCE_CACHEABLE)
+				mvi->regs_ex = ioremap(res_start, res_len);
+			else
+				mvi->regs_ex = ioremap_nocache(res_start,
+						res_len);
+		} else
+			mvi->regs_ex = (void *)res_start;
+		if (!mvi->regs_ex)
+			goto err_out;
+	}
+
+	res_start = pci_resource_start(pdev, bar);
+	res_len = pci_resource_len(pdev, bar);
+	if (!res_start || !res_len)
+		goto err_out;
+
+	res_flag = pci_resource_flags(pdev, bar);
+	if (res_flag & IORESOURCE_CACHEABLE)
+		mvi->regs = ioremap(res_start, res_len);
+	else
+		mvi->regs = ioremap_nocache(res_start, res_len);
+
+	if (!mvi->regs) {
+		if (mvi->regs_ex && (res_flag_ex & IORESOURCE_MEM))
+			iounmap(mvi->regs_ex);
+		mvi->regs_ex = NULL;
+		goto err_out;
+	}
+
+	return 0;
+err_out:
+	return -1;
+}
+
+void mvs_iounmap(void __iomem *regs)
+{
+	iounmap(regs);
+}
+
+static struct mvs_info *__devinit mvs_pci_alloc(struct pci_dev *pdev,
+				const struct pci_device_id *ent,
+				struct Scsi_Host *shost, unsigned int id)
+{
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	mvi = kzalloc(sizeof(*mvi) + MVS_SLOTS * sizeof(struct mvs_slot_info),
+			GFP_KERNEL);
+	if (!mvi)
+		return NULL;
+
+	mvi->pdev = pdev;
+	mvi->dev = &pdev->dev;
+	mvi->chip_id = ent->driver_data;
+	mvi->chip = &mvs_chips[mvi->chip_id];
+	INIT_LIST_HEAD(&mvi->wq_list);
+	mvi->irq = pdev->irq;
+
+	((struct mvs_prv_info *)sha->lldd_ha)->mvi[id] = mvi;
+	((struct mvs_prv_info *)sha->lldd_ha)->n_phy = mvi->chip->n_phy;
+
+	mvi->id = id;
+	mvi->sas = sha;
+	mvi->shost = shost;
+#ifdef MVS_USE_TASKLET
+	tasklet_init(&mv_tasklet, mvs_tasklet, (unsigned long)sha);
+#endif
+
+	if (MVS_CHIP_DISP->chip_ioremap(mvi))
+		goto err_out;
+	if (!mvs_alloc(mvi, shost))
+		return mvi;
+err_out:
+	mvs_free(mvi);
+	return NULL;
+}
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
+static int __devinit mvs_prep_sas_ha_init(struct Scsi_Host *shost,
+				const struct mvs_chip_info *chip_info)
+{
+	int phy_nr, port_nr; unsigned short core_nr;
+	struct asd_sas_phy **arr_phy;
+	struct asd_sas_port **arr_port;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	core_nr = chip_info->n_host;
+	phy_nr  = core_nr * chip_info->n_phy;
+	port_nr = phy_nr;
+
+	memset(sha, 0x00, sizeof(struct sas_ha_struct));
+	arr_phy  = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+	arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+	if (!arr_phy || !arr_port)
+		goto exit_free;
+
+	sha->sas_phy = arr_phy;
+	sha->sas_port = arr_port;
+
+	sha->lldd_ha = kzalloc(sizeof(struct mvs_prv_info), GFP_KERNEL);
+	if (!sha->lldd_ha)
+		goto exit_free;
+
+	((struct mvs_prv_info *)sha->lldd_ha)->n_host = core_nr;
+
+	shost->transportt = mvs_stt;
+	shost->max_id = 128;
+	shost->max_lun = ~0;
+	shost->max_channel = 1;
+	shost->max_cmd_len = 16;
+
+	return 0;
+exit_free:
+	kfree(arr_phy);
+	kfree(arr_port);
+	return -1;
+
+}
+
+static void  __devinit mvs_post_sas_ha_init(struct Scsi_Host *shost,
+			const struct mvs_chip_info *chip_info)
+{
+	int can_queue, i = 0, j = 0;
+	struct mvs_info *mvi = NULL;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	unsigned short nr_core = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+	for (j = 0; j < nr_core; j++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+		for (i = 0; i < chip_info->n_phy; i++) {
+			sha->sas_phy[j * chip_info->n_phy  + i] =
+				&mvi->phy[i].sas_phy;
+			sha->sas_port[j * chip_info->n_phy + i] =
+				&mvi->port[i].sas_port;
+		}
+	}
+
+	sha->sas_ha_name = DRV_NAME;
+	sha->dev = mvi->dev;
+	sha->lldd_module = THIS_MODULE;
+	sha->sas_addr = &mvi->sas_addr[0];
+
+	sha->num_phys = nr_core * chip_info->n_phy;
+
+	sha->lldd_max_execute_num = 1;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		can_queue = MVS_SOC_CAN_QUEUE;
+	else
+		can_queue = MVS_CAN_QUEUE;
+
+	sha->lldd_queue_size = can_queue;
+	shost->can_queue = can_queue;
+	mvi->shost->cmd_per_lun = MVS_SLOTS/sha->num_phys;
+	sha->core.shost = mvi->shost;
+}
+
+static void mvs_init_sas_add(struct mvs_info *mvi)
+{
+	u8 i;
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvi->phy[i].dev_sas_addr = 0x5005043011ab0000ULL;
+		mvi->phy[i].dev_sas_addr =
+			cpu_to_be64((u64)(*(u64 *)&mvi->phy[i].dev_sas_addr));
+	}
+
+	memcpy(mvi->sas_addr, &mvi->phy[0].dev_sas_addr, SAS_ADDR_SIZE);
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	unsigned int rc, nhost = 0;
+	struct mvs_info *mvi;
+	irq_handler_t irq_handler = mvs_interrupt;
+	struct Scsi_Host *shost = NULL;
+	const struct mvs_chip_info *chip;
+
+	dev_printk(KERN_INFO, &pdev->dev,
+		"mvsas: driver version %s\n", DRV_VERSION);
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out_enable;
+
+	pci_set_master(pdev);
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_disable;
+
+	rc = pci_go_64(pdev);
+	if (rc)
+		goto err_out_regions;
+
+	shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+	if (!shost) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	chip = &mvs_chips[ent->driver_data];
+	SHOST_TO_SAS_HA(shost) =
+		kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+	if (!SHOST_TO_SAS_HA(shost)) {
+		kfree(shost);
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	rc = mvs_prep_sas_ha_init(shost, chip);
+	if (rc) {
+		kfree(shost);
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+
+	do {
+		mvi = mvs_pci_alloc(pdev, ent, shost, nhost);
+		if (!mvi) {
+			rc = -ENOMEM;
+			goto err_out_regions;
+		}
+
+		mvs_init_sas_add(mvi);
+
+		mvi->instance = nhost;
+		rc = MVS_CHIP_DISP->chip_init(mvi);
+		if (rc) {
+			mvs_free(mvi);
+			goto err_out_regions;
+		}
+		nhost++;
+	} while (nhost < chip->n_host);
+
+	mvs_post_sas_ha_init(shost, chip);
+
+	rc = scsi_add_host(shost, &pdev->dev);
+	if (rc)
+		goto err_out_shost;
+
+	rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_out_shost;
+	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED,
+		DRV_NAME, SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_not_sas;
+
+	MVS_CHIP_DISP->interrupt_enable(mvi);
+
+	scsi_scan_host(mvi->shost);
+
+	return 0;
+
+err_not_sas:
+	sas_unregister_ha(SHOST_TO_SAS_HA(shost));
+err_out_shost:
+	scsi_remove_host(mvi->shost);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_enable:
+	return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+	unsigned short core_nr, i = 0;
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct mvs_info *mvi = NULL;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+#ifdef MVS_USE_TASKLET
+	tasklet_kill(&mv_tasklet);
+#endif
+
+	pci_set_drvdata(pdev, NULL);
+	sas_unregister_ha(sha);
+	sas_remove_host(mvi->shost);
+	scsi_remove_host(mvi->shost);
+
+	MVS_CHIP_DISP->interrupt_disable(mvi);
+	free_irq(mvi->irq, sha);
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		mvs_free(mvi);
+	}
+	kfree(sha->sas_phy);
+	kfree(sha->sas_port);
+	kfree(sha);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	return;
+}
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+	{
+		.vendor 	= PCI_VENDOR_ID_MARVELL,
+		.device 	= 0x6440,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x6480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_6485,
+	},
+	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+	{ PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
+	{ PCI_VDEVICE(MARVELL, 0x9480), chip_9480 },
+	{ PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
+
+	{ }	/* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= mvs_pci_table,
+	.probe		= mvs_pci_init,
+	.remove		= __devexit_p(mvs_pci_remove),
+};
+
+/* task handler */
+struct task_struct *mvs_th;
+static int __init mvs_init(void)
+{
+	int rc;
+	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+	if (!mvs_stt)
+		return -ENOMEM;
+
+	rc = pci_register_driver(&mvs_pci_driver);
+
+	if (rc)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	sas_release_transport(mvs_stt);
+	return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+	pci_unregister_driver(&mvs_pci_driver);
+	sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+#ifdef CONFIG_PCI
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);
+#endif
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
new file mode 100644
index 00000000000..0d213864121
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -0,0 +1,2154 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+	if (task->lldd_task) {
+		struct mvs_slot_info *slot;
+		slot = task->lldd_task;
+		*tag = slot->slot_tag;
+		return 1;
+	}
+	return 0;
+}
+
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
+{
+	void *bitmap = &mvi->tags;
+	clear_bit(tag, bitmap);
+}
+
+void mvs_tag_free(struct mvs_info *mvi, u32 tag)
+{
+	mvs_tag_clear(mvi, tag);
+}
+
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+	void *bitmap = &mvi->tags;
+	set_bit(tag, bitmap);
+}
+
+inline int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
+{
+	unsigned int index, tag;
+	void *bitmap = &mvi->tags;
+
+	index = find_first_zero_bit(bitmap, mvi->tags_num);
+	tag = index;
+	if (tag >= mvi->tags_num)
+		return -SAS_QUEUE_FULL;
+	mvs_tag_set(mvi, tag);
+	*tag_out = tag;
+	return 0;
+}
+
+void mvs_tag_init(struct mvs_info *mvi)
+{
+	int i;
+	for (i = 0; i < mvi->tags_num; ++i)
+		mvs_tag_clear(mvi, i);
+}
+
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
+{
+	u32 i;
+	u32 run;
+	u32 offset;
+
+	offset = 0;
+	while (size) {
+		printk(KERN_DEBUG"%08X : ", baseaddr + offset);
+		if (size >= 16)
+			run = 16;
+		else
+			run = size;
+		size -= run;
+		for (i = 0; i < 16; i++) {
+			if (i < run)
+				printk(KERN_DEBUG"%02X ", (u32)data[i]);
+			else
+				printk(KERN_DEBUG"   ");
+		}
+		printk(KERN_DEBUG": ");
+		for (i = 0; i < run; i++)
+			printk(KERN_DEBUG"%c",
+				isalnum(data[i]) ? data[i] : '.');
+		printk(KERN_DEBUG"\n");
+		data = &data[16];
+		offset += run;
+	}
+	printk(KERN_DEBUG"\n");
+}
+
+#if (_MV_DUMP > 1)
+static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
+				   enum sas_protocol proto)
+{
+	u32 offset;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+	offset = slot->cmd_size + MVS_OAF_SZ +
+	    MVS_CHIP_DISP->prd_size() * slot->n_elem;
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Status buffer[%d] :\n",
+			tag);
+	mvs_hexdump(32, (u8 *) slot->response,
+		    (u32) slot->buf_dma + offset);
+}
+#endif
+
+static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
+				enum sas_protocol proto)
+{
+#if (_MV_DUMP > 1)
+	u32 sz, w_ptr;
+	u64 addr;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+	/*Delivery Queue */
+	sz = MVS_CHIP_SLOT_SZ;
+	w_ptr = slot->tx;
+	addr = mvi->tx_dma;
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Delivery Queue Base Address=0x%llX (PA)"
+		"(tx_dma=0x%llX), Entry=%04d\n",
+		addr, (unsigned long long)mvi->tx_dma, w_ptr);
+	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
+			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
+	/*Command List */
+	addr = mvi->slot_dma;
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Command List Base Address=0x%llX (PA)"
+		"(slot_dma=0x%llX), Header=%03d\n",
+		addr, (unsigned long long)slot->buf_dma, tag);
+	dev_printk(KERN_DEBUG, mvi->dev, "Command Header[%03d]:\n", tag);
+	/*mvs_cmd_hdr */
+	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
+		(u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
+	/*1.command table area */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Command Table :\n");
+	mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
+	/*2.open address frame area */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Open Address Frame :\n");
+	mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
+				(u32) slot->buf_dma + slot->cmd_size);
+	/*3.status buffer */
+	mvs_hba_sb_dump(mvi, tag, proto);
+	/*4.PRD table */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->PRD table :\n");
+	mvs_hexdump(MVS_CHIP_DISP->prd_size() * slot->n_elem,
+		(u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
+		(u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
+#endif
+}
+
+static void mvs_hba_cq_dump(struct mvs_info *mvi)
+{
+#if (_MV_DUMP > 2)
+	u64 addr;
+	void __iomem *regs = mvi->regs;
+	u32 entry = mvi->rx_cons + 1;
+	u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
+
+	/*Completion Queue */
+	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
+	dev_printk(KERN_DEBUG, mvi->dev, "Completion Task = 0x%p\n",
+		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Completion List Base Address=0x%llX (PA), "
+		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
+		addr, entry - 1, mvi->rx[0]);
+	mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
+		    mvi->rx_dma + sizeof(u32) * entry);
+#endif
+}
+
+void mvs_get_sas_addr(void *buf, u32 buflen)
+{
+	/*memcpy(buf, "\x50\x05\x04\x30\x11\xab\x64\x40", 8);*/
+}
+
+struct mvs_info *mvs_find_dev_mvi(struct domain_device *dev)
+{
+	unsigned long i = 0, j = 0, hi = 0;
+	struct sas_ha_struct *sha = dev->port->ha;
+	struct mvs_info *mvi = NULL;
+	struct asd_sas_phy *phy;
+
+	while (sha->sas_port[i]) {
+		if (sha->sas_port[i] == dev->port) {
+			phy =  container_of(sha->sas_port[i]->phy_list.next,
+				struct asd_sas_phy, port_phy_el);
+			j = 0;
+			while (sha->sas_phy[j]) {
+				if (sha->sas_phy[j] == phy)
+					break;
+				j++;
+			}
+			break;
+		}
+		i++;
+	}
+	hi = j/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+	return mvi;
+
+}
+
+/* FIXME */
+int mvs_find_dev_phyno(struct domain_device *dev, int *phyno)
+{
+	unsigned long i = 0, j = 0, n = 0, num = 0;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct sas_ha_struct *sha = dev->port->ha;
+
+	while (sha->sas_port[i]) {
+		if (sha->sas_port[i] == dev->port) {
+			struct asd_sas_phy *phy;
+			list_for_each_entry(phy,
+				&sha->sas_port[i]->phy_list, port_phy_el) {
+				j = 0;
+				while (sha->sas_phy[j]) {
+					if (sha->sas_phy[j] == phy)
+						break;
+					j++;
+				}
+				phyno[n] = (j >= mvi->chip->n_phy) ?
+					(j - mvi->chip->n_phy) : j;
+				num++;
+				n++;
+			}
+			break;
+		}
+		i++;
+	}
+	return num;
+}
+
+static inline void mvs_free_reg_set(struct mvs_info *mvi,
+				struct mvs_device *dev)
+{
+	if (!dev) {
+		mv_printk("device has been free.\n");
+		return;
+	}
+	if (dev->runing_req != 0)
+		return;
+	if (dev->taskfileset == MVS_ID_NOT_MAPPED)
+		return;
+	MVS_CHIP_DISP->free_reg_set(mvi, &dev->taskfileset);
+}
+
+static inline u8 mvs_assign_reg_set(struct mvs_info *mvi,
+				struct mvs_device *dev)
+{
+	if (dev->taskfileset != MVS_ID_NOT_MAPPED)
+		return 0;
+	return MVS_CHIP_DISP->assign_reg_set(mvi, &dev->taskfileset);
+}
+
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard)
+{
+	u32 no;
+	for_each_phy(phy_mask, phy_mask, no) {
+		if (!(phy_mask & 1))
+			continue;
+		MVS_CHIP_DISP->phy_reset(mvi, no, hard);
+	}
+}
+
+/* FIXME: locking? */
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata)
+{
+	int rc = 0, phy_id = sas_phy->id;
+	u32 tmp, i = 0, hi;
+	struct sas_ha_struct *sha = sas_phy->ha;
+	struct mvs_info *mvi = NULL;
+
+	while (sha->sas_phy[i]) {
+		if (sha->sas_phy[i] == sas_phy)
+			break;
+		i++;
+	}
+	hi = i/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+	switch (func) {
+	case PHY_FUNC_SET_LINK_RATE:
+		MVS_CHIP_DISP->phy_set_link_rate(mvi, phy_id, funcdata);
+		break;
+
+	case PHY_FUNC_HARD_RESET:
+		tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_id);
+		if (tmp & PHY_RST_HARD)
+			break;
+		MVS_CHIP_DISP->phy_reset(mvi, phy_id, 1);
+		break;
+
+	case PHY_FUNC_LINK_RESET:
+		MVS_CHIP_DISP->phy_enable(mvi, phy_id);
+		MVS_CHIP_DISP->phy_reset(mvi, phy_id, 0);
+		break;
+
+	case PHY_FUNC_DISABLE:
+		MVS_CHIP_DISP->phy_disable(mvi, phy_id);
+		break;
+	case PHY_FUNC_RELEASE_SPINUP_HOLD:
+	default:
+		rc = -EOPNOTSUPP;
+	}
+	msleep(200);
+	return rc;
+}
+
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+				u32 off_lo, u32 off_hi, u64 sas_addr)
+{
+	u32 lo = (u32)sas_addr;
+	u32 hi = (u32)(sas_addr>>32);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_lo);
+	MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, lo);
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_hi);
+	MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, hi);
+}
+
+static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	struct sas_ha_struct *sas_ha;
+	if (!phy->phy_attached)
+		return;
+
+	if (!(phy->att_dev_info & PORT_DEV_TRGT_MASK)
+		&& phy->phy_type & PORT_TYPE_SAS) {
+		return;
+	}
+
+	sas_ha = mvi->sas;
+	sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+	if (sas_phy->phy) {
+		struct sas_phy *sphy = sas_phy->phy;
+
+		sphy->negotiated_linkrate = sas_phy->linkrate;
+		sphy->minimum_linkrate = phy->minimum_linkrate;
+		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		sphy->maximum_linkrate = phy->maximum_linkrate;
+		sphy->maximum_linkrate_hw = MVS_CHIP_DISP->phy_max_link_rate();
+	}
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		struct sas_identify_frame *id;
+
+		id = (struct sas_identify_frame *)phy->frame_rcvd;
+		id->dev_type = phy->identify.device_type;
+		id->initiator_bits = SAS_PROTOCOL_ALL;
+		id->target_bits = phy->identify.target_port_protocols;
+	} else if (phy->phy_type & PORT_TYPE_SATA) {
+		/*Nothing*/
+	}
+	mv_dprintk("phy %d byte dmaded.\n", i + mvi->id * mvi->chip->n_phy);
+
+	sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+
+	mvi->sas->notify_port_event(sas_phy,
+				   PORTE_BYTES_DMAED);
+}
+
+int mvs_slave_alloc(struct scsi_device *scsi_dev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+	if (dev_is_sata(dev)) {
+		/* We don't need to rescan targets
+		 * if REPORT_LUNS request is failed
+		 */
+		if (scsi_dev->lun > 0)
+			return -ENXIO;
+		scsi_dev->tagged_supported = 1;
+	}
+
+	return sas_slave_alloc(scsi_dev);
+}
+
+int mvs_slave_configure(struct scsi_device *sdev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(sdev);
+	int ret = sas_slave_configure(sdev);
+
+	if (ret)
+		return ret;
+	if (dev_is_sata(dev)) {
+		/* may set PIO mode */
+	#if MV_DISABLE_NCQ
+		struct ata_port *ap = dev->sata_dev.ap;
+		struct ata_device *adev = ap->link.device;
+		adev->flags |= ATA_DFLAG_NCQ_OFF;
+		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+	#endif
+	}
+	return 0;
+}
+
+void mvs_scan_start(struct Scsi_Host *shost)
+{
+	int i, j;
+	unsigned short core_nr;
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+	for (j = 0; j < core_nr; j++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+		for (i = 0; i < mvi->chip->n_phy; ++i)
+			mvs_bytes_dmaed(mvi, i);
+	}
+}
+
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	/* give the phy enabling interrupt event time to come in (1s
+	 * is empirically about all it takes) */
+	if (time < HZ)
+		return 0;
+	/* Wait for discovery to finish */
+	scsi_flush_work(shost);
+	return 1;
+}
+
+static int mvs_task_prep_smp(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei)
+{
+	int elem, rc, i;
+	struct sas_task *task = tei->task;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct domain_device *dev = task->dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct scatterlist *sg_req, *sg_resp;
+	u32 req_len, resp_len, tag = tei->tag;
+	void *buf_tmp;
+	u8 *buf_oaf;
+	dma_addr_t buf_tmp_dma;
+	void *buf_prd;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#if _MV_DUMP
+	u8 *buf_cmd;
+	void *from;
+#endif
+	/*
+	 * DMA-map SMP request, response buffers
+	 */
+	sg_req = &task->smp_task.smp_req;
+	elem = dma_map_sg(mvi->dev, sg_req, 1, PCI_DMA_TODEVICE);
+	if (!elem)
+		return -ENOMEM;
+	req_len = sg_dma_len(sg_req);
+
+	sg_resp = &task->smp_task.smp_resp;
+	elem = dma_map_sg(mvi->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+	if (!elem) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	resp_len = SB_RFB_MAX;
+
+	/* must be in dwords */
+	if ((req_len & 0x3) || (resp_len & 0x3)) {
+		rc = -EINVAL;
+		goto err_out_2;
+	}
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ***** */
+	buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+#if _MV_DUMP
+	buf_cmd = buf_tmp;
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+	buf_tmp += req_len;
+	buf_tmp_dma += req_len;
+	slot->cmd_size = req_len;
+#else
+	hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table *********************************** */
+	buf_prd = buf_tmp;
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+
+	i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	/*
+	 * Fill in TX ring and command slot header
+	 */
+	slot->tx = mvi->tx_prod;
+	mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
+					TXQ_MODE_I | tag |
+					(sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+	hdr->flags |= flags;
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
+	hdr->tags = cpu_to_le32(tag);
+	hdr->data_len = 0;
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, SMP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_SMP << 4) | 0x01;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = 0xFFFF;		/* SAS SPEC */
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+
+#if _MV_DUMP
+	/* copy cmd table */
+	from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
+	memcpy(buf_cmd, from + sg_req->offset, req_len);
+	kunmap_atomic(from, KM_IRQ0);
+#endif
+	return 0;
+
+err_out_2:
+	dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_resp, 1,
+		     PCI_DMA_FROMDEVICE);
+err_out:
+	dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_req, 1,
+		     PCI_DMA_TODEVICE);
+	return rc;
+}
+
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int mvs_task_prep_ata(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei)
+{
+	struct sas_task *task = tei->task;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_slot_info *slot;
+	void *buf_prd;
+	u32 tag = tei->tag, hdr_tag;
+	u32 flags, del_q;
+	void *buf_tmp;
+	u8 *buf_cmd, *buf_oaf;
+	dma_addr_t buf_tmp_dma;
+	u32 i, req_len, resp_len;
+	const u32 max_resp_len = SB_RFB_MAX;
+
+	if (mvs_assign_reg_set(mvi, mvi_dev) == MVS_ID_NOT_MAPPED) {
+		mv_dprintk("Have not enough regiset for dev %d.\n",
+			mvi_dev->device_id);
+		return -EBUSY;
+	}
+	slot = &mvi->slot_info[tag];
+	slot->tx = mvi->tx_prod;
+	del_q = TXQ_MODE_I | tag |
+		(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
+		(sas_port->phy_mask << TXQ_PHY_SHIFT) |
+		(mvi_dev->taskfileset << TXQ_SRS_SHIFT);
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (task->data_dir == DMA_FROM_DEVICE)
+		flags = (MVS_CHIP_DISP->prd_count() << MCH_PRD_LEN_SHIFT);
+	else
+		flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#else
+	flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#endif
+	if (task->ata_task.use_ncq)
+		flags |= MCH_FPDMA;
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
+		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
+			flags |= MCH_ATAPI;
+	}
+
+	/* FIXME: fill in port multiplier number */
+
+	hdr->flags = cpu_to_le32(flags);
+
+	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
+	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr_tag))
+		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+	else
+		hdr_tag = tag;
+
+	hdr->tags = cpu_to_le32(hdr_tag);
+
+	hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
+	buf_cmd = buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_ATA_CMD_SZ;
+	buf_tmp_dma += MVS_ATA_CMD_SZ;
+#if _MV_DUMP
+	slot->cmd_size = MVS_ATA_CMD_SZ;
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	/* used for STP.  unused for SATA? */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table ********************************************* */
+	buf_prd = buf_tmp;
+
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+	i = MVS_CHIP_DISP->prd_size() * MVS_CHIP_DISP->prd_count();
+
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	/* FIXME: probably unused, for SATA.  kept here just in case
+	 * we get a STP/SATA error information record
+	 */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	req_len = sizeof(struct host_to_dev_fis);
+	resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
+	    sizeof(struct mvs_err_info) - i;
+
+	/* request, response lengths */
+	resp_len = min(resp_len, max_resp_len);
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+	if (likely(!task->ata_task.device_control_reg_update))
+		task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+	/* fill in command FIS and ATAPI CDB */
+	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+		memcpy(buf_cmd + STP_ATAPI_CMD,
+			task->ata_task.atapi_packet, 16);
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, STP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_STP << 4) | 0x1;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (task->data_dir == DMA_FROM_DEVICE)
+		MVS_CHIP_DISP->dma_fix(mvi->bulk_buffer_dma,
+				TRASH_BUCKET_SIZE, tei->n_elem, buf_prd);
+#endif
+	return 0;
+}
+
+static int mvs_task_prep_ssp(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei, int is_tmf,
+			     struct mvs_tmf_task *tmf)
+{
+	struct sas_task *task = tei->task;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct mvs_port *port = tei->port;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_slot_info *slot;
+	void *buf_prd;
+	struct ssp_frame_hdr *ssp_hdr;
+	void *buf_tmp;
+	u8 *buf_cmd, *buf_oaf, fburst = 0;
+	dma_addr_t buf_tmp_dma;
+	u32 flags;
+	u32 resp_len, req_len, i, tag = tei->tag;
+	const u32 max_resp_len = SB_RFB_MAX;
+	u32 phy_mask;
+
+	slot = &mvi->slot_info[tag];
+
+	phy_mask = ((port->wide_port_phymap) ? port->wide_port_phymap :
+		sas_port->phy_mask) & TXQ_PHY_MASK;
+
+	slot->tx = mvi->tx_prod;
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
+				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
+				(phy_mask << TXQ_PHY_SHIFT));
+
+	flags = MCH_RETRY;
+	if (task->ssp_task.enable_first_burst) {
+		flags |= MCH_FBURST;
+		fburst = (1 << 7);
+	}
+	if (is_tmf)
+		flags |= (MCH_SSP_FR_TASK << MCH_SSP_FR_TYPE_SHIFT);
+	else
+		flags |= (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT);
+	hdr->flags = cpu_to_le32(flags | (tei->n_elem << MCH_PRD_LEN_SHIFT));
+	hdr->tags = cpu_to_le32(tag);
+	hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
+	buf_cmd = buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_SSP_CMD_SZ;
+	buf_tmp_dma += MVS_SSP_CMD_SZ;
+#if _MV_DUMP
+	slot->cmd_size = MVS_SSP_CMD_SZ;
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table ********************************************* */
+	buf_prd = buf_tmp;
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+
+	i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
+	    sizeof(struct mvs_err_info) - i;
+	resp_len = min(resp_len, max_resp_len);
+
+	req_len = sizeof(struct ssp_frame_hdr) + 28;
+
+	/* request, response lengths */
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, SSP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_SSP << 4) | 0x1;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in SSP frame header (Command Table.SSP frame header) */
+	ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
+
+	if (is_tmf)
+		ssp_hdr->frame_type = SSP_TASK;
+	else
+		ssp_hdr->frame_type = SSP_COMMAND;
+
+	memcpy(ssp_hdr->hashed_dest_addr, dev->hashed_sas_addr,
+	       HASHED_SAS_ADDR_SIZE);
+	memcpy(ssp_hdr->hashed_src_addr,
+	       dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+	ssp_hdr->tag = cpu_to_be16(tag);
+
+	/* fill in IU for TASK and Command Frame */
+	buf_cmd += sizeof(*ssp_hdr);
+	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+
+	if (ssp_hdr->frame_type != SSP_TASK) {
+		buf_cmd[9] = fburst | task->ssp_task.task_attr |
+				(task->ssp_task.task_prio << 3);
+		memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
+	} else{
+		buf_cmd[10] = tmf->tmf;
+		switch (tmf->tmf) {
+		case TMF_ABORT_TASK:
+		case TMF_QUERY_TASK:
+			buf_cmd[12] =
+				(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+			buf_cmd[13] =
+				tmf->tag_of_task_to_be_managed & 0xff;
+			break;
+		default:
+			break;
+		}
+	}
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+	return 0;
+}
+
+#define	DEV_IS_GONE(mvi_dev)	((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+				struct completion *completion,int is_tmf,
+				struct mvs_tmf_task *tmf)
+{
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct mvs_task_exec_info tei;
+	struct sas_task *t = task;
+	struct mvs_slot_info *slot;
+	u32 tag = 0xdeadbeef, rc, n_elem = 0;
+	u32 n = num, pass = 0;
+	unsigned long flags = 0;
+
+	if (!dev->port) {
+		struct task_status_struct *tsm = &t->task_status;
+
+		tsm->resp = SAS_TASK_UNDELIVERED;
+		tsm->stat = SAS_PHY_DOWN;
+		t->task_done(t);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	do {
+		dev = t->dev;
+		mvi_dev = dev->lldd_dev;
+		if (DEV_IS_GONE(mvi_dev)) {
+			if (mvi_dev)
+				mv_dprintk("device %d not ready.\n",
+					mvi_dev->device_id);
+			else
+				mv_dprintk("device %016llx not ready.\n",
+					SAS_ADDR(dev->sas_addr));
+
+			rc = SAS_PHY_DOWN;
+			goto out_done;
+		}
+
+		if (dev->port->id >= mvi->chip->n_phy)
+			tei.port = &mvi->port[dev->port->id - mvi->chip->n_phy];
+		else
+			tei.port = &mvi->port[dev->port->id];
+
+		if (!tei.port->port_attached) {
+			if (sas_protocol_ata(t->task_proto)) {
+				mv_dprintk("port %d does not"
+					"attached device.\n", dev->port->id);
+				rc = SAS_PHY_DOWN;
+				goto out_done;
+			} else {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+				t->task_done(t);
+				if (n > 1)
+					t = list_entry(t->list.next,
+							struct sas_task, list);
+				continue;
+			}
+		}
+
+		if (!sas_protocol_ata(t->task_proto)) {
+			if (t->num_scatter) {
+				n_elem = dma_map_sg(mvi->dev,
+						    t->scatter,
+						    t->num_scatter,
+						    t->data_dir);
+				if (!n_elem) {
+					rc = -ENOMEM;
+					goto err_out;
+				}
+			}
+		} else {
+			n_elem = t->num_scatter;
+		}
+
+		rc = mvs_tag_alloc(mvi, &tag);
+		if (rc)
+			goto err_out;
+
+		slot = &mvi->slot_info[tag];
+
+
+		t->lldd_task = NULL;
+		slot->n_elem = n_elem;
+		slot->slot_tag = tag;
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+		tei.task = t;
+		tei.hdr = &mvi->slot[tag];
+		tei.tag = tag;
+		tei.n_elem = n_elem;
+		switch (t->task_proto) {
+		case SAS_PROTOCOL_SMP:
+			rc = mvs_task_prep_smp(mvi, &tei);
+			break;
+		case SAS_PROTOCOL_SSP:
+			rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
+			break;
+		case SAS_PROTOCOL_SATA:
+		case SAS_PROTOCOL_STP:
+		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+			rc = mvs_task_prep_ata(mvi, &tei);
+			break;
+		default:
+			dev_printk(KERN_ERR, mvi->dev,
+				"unknown sas_task proto: 0x%x\n",
+				t->task_proto);
+			rc = -EINVAL;
+			break;
+		}
+
+		if (rc) {
+			mv_dprintk("rc is %x\n", rc);
+			goto err_out_tag;
+		}
+		slot->task = t;
+		slot->port = tei.port;
+		t->lldd_task = slot;
+		list_add_tail(&slot->entry, &tei.port->list);
+		/* TODO: select normal or high priority */
+		spin_lock(&t->task_state_lock);
+		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+		spin_unlock(&t->task_state_lock);
+
+		mvs_hba_memory_dump(mvi, tag, t->task_proto);
+		mvi_dev->runing_req++;
+		++pass;
+		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+		if (n > 1)
+			t = list_entry(t->list.next, struct sas_task, list);
+	} while (--n);
+	rc = 0;
+	goto out_done;
+
+err_out_tag:
+	mvs_tag_free(mvi, tag);
+err_out:
+
+	dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+	if (!sas_protocol_ata(t->task_proto))
+		if (n_elem)
+			dma_unmap_sg(mvi->dev, t->scatter, n_elem,
+				     t->data_dir);
+out_done:
+	if (likely(pass)) {
+		MVS_CHIP_DISP->start_delivery(mvi,
+			(mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+	}
+	spin_unlock_irqrestore(&mvi->lock, flags);
+	return rc;
+}
+
+int mvs_queue_command(struct sas_task *task, const int num,
+			gfp_t gfp_flags)
+{
+	return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
+			  struct mvs_slot_info *slot, u32 slot_idx)
+{
+	if (!slot->task)
+		return;
+	if (!sas_protocol_ata(task->task_proto))
+		if (slot->n_elem)
+			dma_unmap_sg(mvi->dev, task->scatter,
+				     slot->n_elem, task->data_dir);
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SMP:
+		dma_unmap_sg(mvi->dev, &task->smp_task.smp_resp, 1,
+			     PCI_DMA_FROMDEVICE);
+		dma_unmap_sg(mvi->dev, &task->smp_task.smp_req, 1,
+			     PCI_DMA_TODEVICE);
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SSP:
+	default:
+		/* do nothing */
+		break;
+	}
+	list_del_init(&slot->entry);
+	task->lldd_task = NULL;
+	slot->task = NULL;
+	slot->port = NULL;
+	slot->slot_tag = 0xFFFFFFFF;
+	mvs_slot_free(mvi, slot_idx);
+}
+
+static void mvs_update_wideport(struct mvs_info *mvi, int i)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct mvs_port *port = phy->port;
+	int j, no;
+
+	for_each_phy(port->wide_port_phymap, j, no) {
+		if (j & 1) {
+			MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+						PHYR_WIDE_PORT);
+			MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+						port->wide_port_phymap);
+		} else {
+			MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+						PHYR_WIDE_PORT);
+			MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+						0);
+		}
+	}
+}
+
+static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
+{
+	u32 tmp;
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct mvs_port *port = phy->port;
+
+	tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, i);
+	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
+		if (!port)
+			phy->phy_attached = 1;
+		return tmp;
+	}
+
+	if (port) {
+		if (phy->phy_type & PORT_TYPE_SAS) {
+			port->wide_port_phymap &= ~(1U << i);
+			if (!port->wide_port_phymap)
+				port->port_attached = 0;
+			mvs_update_wideport(mvi, i);
+		} else if (phy->phy_type & PORT_TYPE_SATA)
+			port->port_attached = 0;
+		phy->port = NULL;
+		phy->phy_attached = 0;
+		phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	}
+	return 0;
+}
+
+static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
+{
+	u32 *s = (u32 *) buf;
+
+	if (!s)
+		return NULL;
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
+	s[3] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
+	s[2] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
+	s[1] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
+	s[0] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	/* Workaround: take some ATAPI devices for ATA */
+	if (((s[1] & 0x00FFFFFF) == 0x00EB1401) && (*(u8 *)&s[3] == 0x01))
+		s[1] = 0x00EB1401 | (*((u8 *)&s[1] + 3) & 0x10);
+
+	return s;
+}
+
+static u32 mvs_is_sig_fis_received(u32 irq_status)
+{
+	return irq_status & PHYEV_SIG_FIS;
+}
+
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct sas_identify_frame *id;
+
+	id = (struct sas_identify_frame *)phy->frame_rcvd;
+
+	if (get_st) {
+		phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, i);
+		phy->phy_status = mvs_is_phy_ready(mvi, i);
+	}
+
+	if (phy->phy_status) {
+		int oob_done = 0;
+		struct asd_sas_phy *sas_phy = &mvi->phy[i].sas_phy;
+
+		oob_done = MVS_CHIP_DISP->oob_done(mvi, i);
+
+		MVS_CHIP_DISP->fix_phy_info(mvi, i, id);
+		if (phy->phy_type & PORT_TYPE_SATA) {
+			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
+			if (mvs_is_sig_fis_received(phy->irq_status)) {
+				phy->phy_attached = 1;
+				phy->att_dev_sas_addr =
+					i + mvi->id * mvi->chip->n_phy;
+				if (oob_done)
+					sas_phy->oob_mode = SATA_OOB_MODE;
+				phy->frame_rcvd_size =
+				    sizeof(struct dev_to_host_fis);
+				mvs_get_d2h_reg(mvi, i, id);
+			} else {
+				u32 tmp;
+				dev_printk(KERN_DEBUG, mvi->dev,
+					"Phy%d : No sig fis\n", i);
+				tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, i);
+				MVS_CHIP_DISP->write_port_irq_mask(mvi, i,
+						tmp | PHYEV_SIG_FIS);
+				phy->phy_attached = 0;
+				phy->phy_type &= ~PORT_TYPE_SATA;
+				MVS_CHIP_DISP->phy_reset(mvi, i, 0);
+				goto out_done;
+			}
+		}		else if (phy->phy_type & PORT_TYPE_SAS
+			|| phy->att_dev_info & PORT_SSP_INIT_MASK) {
+			phy->phy_attached = 1;
+			phy->identify.device_type =
+				phy->att_dev_info & PORT_DEV_TYPE_MASK;
+
+			if (phy->identify.device_type == SAS_END_DEV)
+				phy->identify.target_port_protocols =
+							SAS_PROTOCOL_SSP;
+			else if (phy->identify.device_type != NO_DEVICE)
+				phy->identify.target_port_protocols =
+							SAS_PROTOCOL_SMP;
+			if (oob_done)
+				sas_phy->oob_mode = SAS_OOB_MODE;
+			phy->frame_rcvd_size =
+			    sizeof(struct sas_identify_frame);
+		}
+		memcpy(sas_phy->attached_sas_addr,
+			&phy->att_dev_sas_addr, SAS_ADDR_SIZE);
+
+		if (MVS_CHIP_DISP->phy_work_around)
+			MVS_CHIP_DISP->phy_work_around(mvi, i);
+	}
+	mv_dprintk("port %d attach dev info is %x\n",
+		i + mvi->id * mvi->chip->n_phy, phy->att_dev_info);
+	mv_dprintk("port %d attach sas addr is %llx\n",
+		i + mvi->id * mvi->chip->n_phy, phy->att_dev_sas_addr);
+out_done:
+	if (get_st)
+		MVS_CHIP_DISP->write_port_irq_stat(mvi, i, phy->irq_status);
+}
+
+static void mvs_port_notify_formed(struct asd_sas_phy *sas_phy, int lock)
+{
+	struct sas_ha_struct *sas_ha = sas_phy->ha;
+	struct mvs_info *mvi = NULL; int i = 0, hi;
+	struct mvs_phy *phy = sas_phy->lldd_phy;
+	struct asd_sas_port *sas_port = sas_phy->port;
+	struct mvs_port *port;
+	unsigned long flags = 0;
+	if (!sas_port)
+		return;
+
+	while (sas_ha->sas_phy[i]) {
+		if (sas_ha->sas_phy[i] == sas_phy)
+			break;
+		i++;
+	}
+	hi = i/((struct mvs_prv_info *)sas_ha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sas_ha->lldd_ha)->mvi[hi];
+	if (sas_port->id >= mvi->chip->n_phy)
+		port = &mvi->port[sas_port->id - mvi->chip->n_phy];
+	else
+		port = &mvi->port[sas_port->id];
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+	port->port_attached = 1;
+	phy->port = port;
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		port->wide_port_phymap = sas_port->phy_mask;
+		mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
+		mvs_update_wideport(mvi, sas_phy->id);
+	}
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+static void mvs_port_notify_deformed(struct asd_sas_phy *sas_phy, int lock)
+{
+	/*Nothing*/
+}
+
+
+void mvs_port_formed(struct asd_sas_phy *sas_phy)
+{
+	mvs_port_notify_formed(sas_phy, 1);
+}
+
+void mvs_port_deformed(struct asd_sas_phy *sas_phy)
+{
+	mvs_port_notify_deformed(sas_phy, 1);
+}
+
+struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi)
+{
+	u32 dev;
+	for (dev = 0; dev < MVS_MAX_DEVICES; dev++) {
+		if (mvi->devices[dev].dev_type == NO_DEVICE) {
+			mvi->devices[dev].device_id = dev;
+			return &mvi->devices[dev];
+		}
+	}
+
+	if (dev == MVS_MAX_DEVICES)
+		mv_printk("max support %d devices, ignore ..\n",
+			MVS_MAX_DEVICES);
+
+	return NULL;
+}
+
+void mvs_free_dev(struct mvs_device *mvi_dev)
+{
+	u32 id = mvi_dev->device_id;
+	memset(mvi_dev, 0, sizeof(*mvi_dev));
+	mvi_dev->device_id = id;
+	mvi_dev->dev_type = NO_DEVICE;
+	mvi_dev->dev_status = MVS_DEV_NORMAL;
+	mvi_dev->taskfileset = MVS_ID_NOT_MAPPED;
+}
+
+int mvs_dev_found_notify(struct domain_device *dev, int lock)
+{
+	unsigned long flags = 0;
+	int res = 0;
+	struct mvs_info *mvi = NULL;
+	struct domain_device *parent_dev = dev->parent;
+	struct mvs_device *mvi_device;
+
+	mvi = mvs_find_dev_mvi(dev);
+
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+
+	mvi_device = mvs_alloc_dev(mvi);
+	if (!mvi_device) {
+		res = -1;
+		goto found_out;
+	}
+	dev->lldd_dev = mvi_device;
+	mvi_device->dev_type = dev->dev_type;
+	mvi_device->mvi_info = mvi;
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+		int phy_id;
+		u8 phy_num = parent_dev->ex_dev.num_phys;
+		struct ex_phy *phy;
+		for (phy_id = 0; phy_id < phy_num; phy_id++) {
+			phy = &parent_dev->ex_dev.ex_phy[phy_id];
+			if (SAS_ADDR(phy->attached_sas_addr) ==
+				SAS_ADDR(dev->sas_addr)) {
+				mvi_device->attached_phy = phy_id;
+				break;
+			}
+		}
+
+		if (phy_id == phy_num) {
+			mv_printk("Error: no attached dev:%016llx"
+				"at ex:%016llx.\n",
+				SAS_ADDR(dev->sas_addr),
+				SAS_ADDR(parent_dev->sas_addr));
+			res = -1;
+		}
+	}
+
+found_out:
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	return res;
+}
+
+int mvs_dev_found(struct domain_device *dev)
+{
+	return mvs_dev_found_notify(dev, 1);
+}
+
+void mvs_dev_gone_notify(struct domain_device *dev, int lock)
+{
+	unsigned long flags = 0;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+
+	if (mvi_dev) {
+		mv_dprintk("found dev[%d:%x] is gone.\n",
+			mvi_dev->device_id, mvi_dev->dev_type);
+		mvs_free_reg_set(mvi, mvi_dev);
+		mvs_free_dev(mvi_dev);
+	} else {
+		mv_dprintk("found dev has gone.\n");
+	}
+	dev->lldd_dev = NULL;
+
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+
+void mvs_dev_gone(struct domain_device *dev)
+{
+	mvs_dev_gone_notify(dev, 1);
+}
+
+static  struct sas_task *mvs_alloc_task(void)
+{
+	struct sas_task *task = kzalloc(sizeof(struct sas_task), GFP_KERNEL);
+
+	if (task) {
+		INIT_LIST_HEAD(&task->list);
+		spin_lock_init(&task->task_state_lock);
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_timer(&task->timer);
+		init_completion(&task->completion);
+	}
+	return task;
+}
+
+static  void mvs_free_task(struct sas_task *task)
+{
+	if (task) {
+		BUG_ON(!list_empty(&task->list));
+		kfree(task);
+	}
+}
+
+static void mvs_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+static void mvs_tmf_timedout(unsigned long data)
+{
+	struct sas_task *task = (struct sas_task *)data;
+
+	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	complete(&task->completion);
+}
+
+/* XXX */
+#define MVS_TASK_TIMEOUT 20
+static int mvs_exec_internal_tmf_task(struct domain_device *dev,
+			void *parameter, u32 para_len, struct mvs_tmf_task *tmf)
+{
+	int res, retry;
+	struct sas_task *task = NULL;
+
+	for (retry = 0; retry < 3; retry++) {
+		task = mvs_alloc_task();
+		if (!task)
+			return -ENOMEM;
+
+		task->dev = dev;
+		task->task_proto = dev->tproto;
+
+		memcpy(&task->ssp_task, parameter, para_len);
+		task->task_done = mvs_task_done;
+
+		task->timer.data = (unsigned long) task;
+		task->timer.function = mvs_tmf_timedout;
+		task->timer.expires = jiffies + MVS_TASK_TIMEOUT*HZ;
+		add_timer(&task->timer);
+
+		res = mvs_task_exec(task, 1, GFP_KERNEL, NULL, 1, tmf);
+
+		if (res) {
+			del_timer(&task->timer);
+			mv_printk("executing internel task failed:%d\n", res);
+			goto ex_err;
+		}
+
+		wait_for_completion(&task->completion);
+		res = -TMF_RESP_FUNC_FAILED;
+		/* Even TMF timed out, return direct. */
+		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				mv_printk("TMF task[%x] timeout.\n", tmf->tmf);
+				goto ex_err;
+			}
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		    task->task_status.stat == SAM_GOOD) {
+			res = TMF_RESP_FUNC_COMPLETE;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		      task->task_status.stat == SAS_DATA_UNDERRUN) {
+			/* no error, but return the number of bytes of
+			 * underrun */
+			res = task->task_status.residual;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		      task->task_status.stat == SAS_DATA_OVERRUN) {
+			mv_dprintk("blocked task error.\n");
+			res = -EMSGSIZE;
+			break;
+		} else {
+			mv_dprintk(" task to dev %016llx response: 0x%x "
+				    "status 0x%x\n",
+				    SAS_ADDR(dev->sas_addr),
+				    task->task_status.resp,
+				    task->task_status.stat);
+			mvs_free_task(task);
+			task = NULL;
+
+		}
+	}
+ex_err:
+	BUG_ON(retry == 3 && task != NULL);
+	if (task != NULL)
+		mvs_free_task(task);
+	return res;
+}
+
+static int mvs_debug_issue_ssp_tmf(struct domain_device *dev,
+				u8 *lun, struct mvs_tmf_task *tmf)
+{
+	struct sas_ssp_task ssp_task;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	if (!(dev->tproto & SAS_PROTOCOL_SSP))
+		return TMF_RESP_FUNC_ESUPP;
+
+	strncpy((u8 *)&ssp_task.LUN, lun, 8);
+
+	return mvs_exec_internal_tmf_task(dev, &ssp_task,
+				sizeof(ssp_task), tmf);
+}
+
+
+/*  Standard mandates link reset for ATA  (type 0)
+    and hard reset for SSP (type 1) , only for RECOVERY */
+static int mvs_debug_I_T_nexus_reset(struct domain_device *dev)
+{
+	int rc;
+	struct sas_phy *phy = sas_find_local_phy(dev);
+	int reset_type = (dev->dev_type == SATA_DEV ||
+			(dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+	rc = sas_phy_reset(phy, reset_type);
+	msleep(2000);
+	return rc;
+}
+
+/* mandatory SAM-3 */
+int mvs_lu_reset(struct domain_device *dev, u8 *lun)
+{
+	unsigned long flags;
+	int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+	struct mvs_device * mvi_dev = dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	tmf_task.tmf = TMF_LU_RESET;
+	mvi_dev->dev_status = MVS_DEV_EH;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+	if (rc == TMF_RESP_FUNC_COMPLETE) {
+		num = mvs_find_dev_phyno(dev, phyno);
+		spin_lock_irqsave(&mvi->lock, flags);
+		for (i = 0; i < num; i++)
+			mvs_release_task(mvi, phyno[i], dev);
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	}
+	/* If failed, fall-through I_T_Nexus reset */
+	mv_printk("%s for device[%x]:rc= %d\n", __func__,
+			mvi_dev->device_id, rc);
+	return rc;
+}
+
+int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+	unsigned long flags;
+	int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_device * mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	if (mvi_dev->dev_status != MVS_DEV_EH)
+		return TMF_RESP_FUNC_COMPLETE;
+	rc = mvs_debug_I_T_nexus_reset(dev);
+	mv_printk("%s for device[%x]:rc= %d\n",
+		__func__, mvi_dev->device_id, rc);
+
+	/* housekeeper */
+	num = mvs_find_dev_phyno(dev, phyno);
+	spin_lock_irqsave(&mvi->lock, flags);
+	for (i = 0; i < num; i++)
+		mvs_release_task(mvi, phyno[i], dev);
+	spin_unlock_irqrestore(&mvi->lock, flags);
+
+	return rc;
+}
+/* optional SAM-3 */
+int mvs_query_task(struct sas_task *task)
+{
+	u32 tag;
+	struct scsi_lun lun;
+	struct mvs_tmf_task tmf_task;
+	int rc = TMF_RESP_FUNC_FAILED;
+
+	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+		struct domain_device *dev = task->dev;
+		struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+		struct mvs_info *mvi = mvi_dev->mvi_info;
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = mvs_find_tag(mvi, task, &tag);
+		if (rc == 0) {
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+
+		tmf_task.tmf = TMF_QUERY_TASK;
+		tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+		rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+		switch (rc) {
+		/* The task is still in Lun, release it then */
+		case TMF_RESP_FUNC_SUCC:
+		/* The task is not in Lun or failed, reset the phy */
+		case TMF_RESP_FUNC_FAILED:
+		case TMF_RESP_FUNC_COMPLETE:
+			break;
+		}
+	}
+	mv_printk("%s:rc= %d\n", __func__, rc);
+	return rc;
+}
+
+/*  mandatory SAM-3, still need free task/slot info */
+int mvs_abort_task(struct sas_task *task)
+{
+	struct scsi_lun lun;
+	struct mvs_tmf_task tmf_task;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	int rc = TMF_RESP_FUNC_FAILED;
+	unsigned long flags;
+	u32 tag;
+
+	if (mvi->exp_req)
+		mvi->exp_req--;
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		rc = TMF_RESP_FUNC_COMPLETE;
+		goto out;
+	}
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = mvs_find_tag(mvi, task, &tag);
+		if (rc == 0) {
+			mv_printk("No such tag in %s\n", __func__);
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+
+		tmf_task.tmf = TMF_ABORT_TASK;
+		tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+		rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+
+		/* if successful, clear the task and callback forwards.*/
+		if (rc == TMF_RESP_FUNC_COMPLETE) {
+			u32 slot_no;
+			struct mvs_slot_info *slot;
+
+			if (task->lldd_task) {
+				slot = task->lldd_task;
+				slot_no = (u32) (slot - mvi->slot_info);
+				mvs_slot_complete(mvi, slot_no, 1);
+			}
+		}
+	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
+		task->task_proto & SAS_PROTOCOL_STP) {
+		/* to do free register_set */
+	} else {
+		/* SMP */
+
+	}
+out:
+	if (rc != TMF_RESP_FUNC_COMPLETE)
+		mv_printk("%s:rc= %d\n", __func__, rc);
+	return rc;
+}
+
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_ABORT_TASK_SET;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int mvs_clear_aca(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_ACA;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int mvs_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_TASK_SET;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+			u32 slot_idx, int err)
+{
+	struct mvs_device *mvi_dev = task->dev->lldd_dev;
+	struct task_status_struct *tstat = &task->task_status;
+	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+	int stat = SAM_GOOD;
+
+
+	resp->frame_len = sizeof(struct dev_to_host_fis);
+	memcpy(&resp->ending_fis[0],
+	       SATA_RECEIVED_D2H_FIS(mvi_dev->taskfileset),
+	       sizeof(struct dev_to_host_fis));
+	tstat->buf_valid_size = sizeof(*resp);
+	if (unlikely(err))
+		stat = SAS_PROTO_RESPONSE;
+	return stat;
+}
+
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+			 u32 slot_idx)
+{
+	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+	int stat;
+	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+	u32 tfs = 0;
+	enum mvs_port_type type = PORT_TYPE_SAS;
+
+	if (err_dw0 & CMD_ISS_STPD)
+		MVS_CHIP_DISP->issue_stop(mvi, type, tfs);
+
+	MVS_CHIP_DISP->command_active(mvi, slot_idx);
+
+	stat = SAM_CHECK_COND;
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		stat = SAS_ABORTED_TASK;
+		break;
+	case SAS_PROTOCOL_SMP:
+		stat = SAM_CHECK_COND;
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+	{
+		if (err_dw0 == 0x80400002)
+			mv_printk("find reserved error, why?\n");
+
+		task->ata_task.use_ncq = 0;
+		stat = SAS_PROTO_RESPONSE;
+		mvs_sata_done(mvi, task, slot_idx, 1);
+
+	}
+		break;
+	default:
+		break;
+	}
+
+	return stat;
+}
+
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+	struct sas_task *task = slot->task;
+	struct mvs_device *mvi_dev = NULL;
+	struct task_status_struct *tstat;
+
+	bool aborted;
+	void *to;
+	enum exec_status sts;
+
+	if (mvi->exp_req)
+		mvi->exp_req--;
+	if (unlikely(!task || !task->lldd_task))
+		return -1;
+
+	tstat = &task->task_status;
+	mvi_dev = task->dev->lldd_dev;
+
+	mvs_hba_cq_dump(mvi);
+
+	spin_lock(&task->task_state_lock);
+	task->task_state_flags &=
+		~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+	task->task_state_flags |= SAS_TASK_STATE_DONE;
+	/* race condition*/
+	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
+	spin_unlock(&task->task_state_lock);
+
+	memset(tstat, 0, sizeof(*tstat));
+	tstat->resp = SAS_TASK_COMPLETE;
+
+	if (unlikely(aborted)) {
+		tstat->stat = SAS_ABORTED_TASK;
+		if (mvi_dev)
+			mvi_dev->runing_req--;
+		if (sas_protocol_ata(task->task_proto))
+			mvs_free_reg_set(mvi, mvi_dev);
+
+		mvs_slot_task_free(mvi, task, slot, slot_idx);
+		return -1;
+	}
+
+	if (unlikely(!mvi_dev || !slot->port->port_attached || flags)) {
+		mv_dprintk("port has not device.\n");
+		tstat->stat = SAS_PHY_DOWN;
+		goto out;
+	}
+
+	/*
+	if (unlikely((rx_desc & RXQ_ERR) || (*(u64 *) slot->response))) {
+		 mv_dprintk("Find device[%016llx] RXQ_ERR %X,
+		 err info:%016llx\n",
+		 SAS_ADDR(task->dev->sas_addr),
+		 rx_desc, (u64)(*(u64 *) slot->response));
+	}
+	*/
+
+	/* error info record present */
+	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
+		goto out;
+	}
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		/* hw says status == 0, datapres == 0 */
+		if (rx_desc & RXQ_GOOD) {
+			tstat->stat = SAM_GOOD;
+			tstat->resp = SAS_TASK_COMPLETE;
+		}
+		/* response frame present */
+		else if (rx_desc & RXQ_RSP) {
+			struct ssp_response_iu *iu = slot->response +
+						sizeof(struct mvs_err_info);
+			sas_ssp_task_response(mvi->dev, task, iu);
+		} else
+			tstat->stat = SAM_CHECK_COND;
+		break;
+
+	case SAS_PROTOCOL_SMP: {
+			struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+			tstat->stat = SAM_GOOD;
+			to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
+			memcpy(to + sg_resp->offset,
+				slot->response + sizeof(struct mvs_err_info),
+				sg_dma_len(sg_resp));
+			kunmap_atomic(to, KM_IRQ0);
+			break;
+		}
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
+			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
+			break;
+		}
+
+	default:
+		tstat->stat = SAM_CHECK_COND;
+		break;
+	}
+
+out:
+	if (mvi_dev) {
+		mvi_dev->runing_req--;
+		if (sas_protocol_ata(task->task_proto))
+			mvs_free_reg_set(mvi, mvi_dev);
+	}
+	mvs_slot_task_free(mvi, task, slot, slot_idx);
+	sts = tstat->stat;
+
+	spin_unlock(&mvi->lock);
+	if (task->task_done)
+		task->task_done(task);
+	else
+		mv_dprintk("why has not task_done.\n");
+	spin_lock(&mvi->lock);
+
+	return sts;
+}
+
+void mvs_release_task(struct mvs_info *mvi,
+		int phy_no, struct domain_device *dev)
+{
+	int i = 0; u32 slot_idx;
+	struct mvs_phy *phy;
+	struct mvs_port *port;
+	struct mvs_slot_info *slot, *slot2;
+
+	phy = &mvi->phy[phy_no];
+	port = phy->port;
+	if (!port)
+		return;
+
+	list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+		struct sas_task *task;
+		slot_idx = (u32) (slot - mvi->slot_info);
+		task = slot->task;
+
+		if (dev && task->dev != dev)
+			continue;
+
+		mv_printk("Release slot [%x] tag[%x], task [%p]:\n",
+			slot_idx, slot->slot_tag, task);
+
+		if (task->task_proto & SAS_PROTOCOL_SSP) {
+			mv_printk("attached with SSP task CDB[");
+			for (i = 0; i < 16; i++)
+				mv_printk(" %02x", task->ssp_task.cdb[i]);
+			mv_printk(" ]\n");
+		}
+
+		mvs_slot_complete(mvi, slot_idx, 1);
+	}
+}
+
+static void mvs_phy_disconnected(struct mvs_phy *phy)
+{
+	phy->phy_attached = 0;
+	phy->att_dev_info = 0;
+	phy->att_dev_sas_addr = 0;
+}
+
+static void mvs_work_queue(struct work_struct *work)
+{
+	struct delayed_work *dw = container_of(work, struct delayed_work, work);
+	struct mvs_wq *mwq = container_of(dw, struct mvs_wq, work_q);
+	struct mvs_info *mvi = mwq->mvi;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	if (mwq->handler & PHY_PLUG_EVENT) {
+		u32 phy_no = (unsigned long) mwq->data;
+		struct sas_ha_struct *sas_ha = mvi->sas;
+		struct mvs_phy *phy = &mvi->phy[phy_no];
+		struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+		if (phy->phy_event & PHY_PLUG_OUT) {
+			u32 tmp;
+			struct sas_identify_frame *id;
+			id = (struct sas_identify_frame *)phy->frame_rcvd;
+			tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no);
+			phy->phy_event &= ~PHY_PLUG_OUT;
+			if (!(tmp & PHY_READY_MASK)) {
+				sas_phy_disconnected(sas_phy);
+				mvs_phy_disconnected(phy);
+				sas_ha->notify_phy_event(sas_phy,
+					PHYE_LOSS_OF_SIGNAL);
+				mv_dprintk("phy%d Removed Device\n", phy_no);
+			} else {
+				MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+				mvs_update_phyinfo(mvi, phy_no, 1);
+				mvs_bytes_dmaed(mvi, phy_no);
+				mvs_port_notify_formed(sas_phy, 0);
+				mv_dprintk("phy%d Attached Device\n", phy_no);
+			}
+		}
+	}
+	list_del(&mwq->entry);
+	spin_unlock_irqrestore(&mvi->lock, flags);
+	kfree(mwq);
+}
+
+static int mvs_handle_event(struct mvs_info *mvi, void *data, int handler)
+{
+	struct mvs_wq *mwq;
+	int ret = 0;
+
+	mwq = kmalloc(sizeof(struct mvs_wq), GFP_ATOMIC);
+	if (mwq) {
+		mwq->mvi = mvi;
+		mwq->data = data;
+		mwq->handler = handler;
+		MV_INIT_DELAYED_WORK(&mwq->work_q, mvs_work_queue, mwq);
+		list_add_tail(&mwq->entry, &mvi->wq_list);
+		schedule_delayed_work(&mwq->work_q, HZ * 2);
+	} else
+		ret = -ENOMEM;
+
+	return ret;
+}
+
+static void mvs_sig_time_out(unsigned long tphy)
+{
+	struct mvs_phy *phy = (struct mvs_phy *)tphy;
+	struct mvs_info *mvi = phy->mvi;
+	u8 phy_no;
+
+	for (phy_no = 0; phy_no < mvi->chip->n_phy; phy_no++) {
+		if (&mvi->phy[phy_no] == phy) {
+			mv_dprintk("Get signature time out, reset phy %d\n",
+				phy_no+mvi->id*mvi->chip->n_phy);
+			MVS_CHIP_DISP->phy_reset(mvi, phy_no, 1);
+		}
+	}
+}
+
+static void mvs_sig_remove_timer(struct mvs_phy *phy)
+{
+	if (phy->timer.function)
+		del_timer(&phy->timer);
+	phy->timer.function = NULL;
+}
+
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
+{
+	u32 tmp;
+	struct sas_ha_struct *sas_ha = mvi->sas;
+	struct mvs_phy *phy = &mvi->phy[phy_no];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, phy_no);
+	mv_dprintk("port %d ctrl sts=0x%X.\n", phy_no+mvi->id*mvi->chip->n_phy,
+		MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no));
+	mv_dprintk("Port %d irq sts = 0x%X\n", phy_no+mvi->id*mvi->chip->n_phy,
+		phy->irq_status);
+
+	/*
+	* events is port event now ,
+	* we need check the interrupt status which belongs to per port.
+	*/
+
+	if (phy->irq_status & PHYEV_DCDR_ERR)
+		mv_dprintk("port %d STP decoding error.\n",
+		phy_no+mvi->id*mvi->chip->n_phy);
+
+	if (phy->irq_status & PHYEV_POOF) {
+		if (!(phy->phy_event & PHY_PLUG_OUT)) {
+			int dev_sata = phy->phy_type & PORT_TYPE_SATA;
+			int ready;
+			mvs_release_task(mvi, phy_no, NULL);
+			phy->phy_event |= PHY_PLUG_OUT;
+			mvs_handle_event(mvi,
+				(void *)(unsigned long)phy_no,
+				PHY_PLUG_EVENT);
+			ready = mvs_is_phy_ready(mvi, phy_no);
+			if (!ready)
+				mv_dprintk("phy%d Unplug Notice\n",
+					phy_no +
+					mvi->id * mvi->chip->n_phy);
+			if (ready || dev_sata) {
+				if (MVS_CHIP_DISP->stp_reset)
+					MVS_CHIP_DISP->stp_reset(mvi,
+							phy_no);
+				else
+					MVS_CHIP_DISP->phy_reset(mvi,
+							phy_no, 0);
+				return;
+			}
+		}
+	}
+
+	if (phy->irq_status & PHYEV_COMWAKE) {
+		tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, phy_no);
+		MVS_CHIP_DISP->write_port_irq_mask(mvi, phy_no,
+					tmp | PHYEV_SIG_FIS);
+		if (phy->timer.function == NULL) {
+			phy->timer.data = (unsigned long)phy;
+			phy->timer.function = mvs_sig_time_out;
+			phy->timer.expires = jiffies + 10*HZ;
+			add_timer(&phy->timer);
+		}
+	}
+	if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
+		phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
+		mvs_sig_remove_timer(phy);
+		mv_dprintk("notify plug in on phy[%d]\n", phy_no);
+		if (phy->phy_status) {
+			mdelay(10);
+			MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+			if (phy->phy_type & PORT_TYPE_SATA) {
+				tmp = MVS_CHIP_DISP->read_port_irq_mask(
+						mvi, phy_no);
+				tmp &= ~PHYEV_SIG_FIS;
+				MVS_CHIP_DISP->write_port_irq_mask(mvi,
+							phy_no, tmp);
+			}
+			mvs_update_phyinfo(mvi, phy_no, 0);
+			mvs_bytes_dmaed(mvi, phy_no);
+			/* whether driver is going to handle hot plug */
+			if (phy->phy_event & PHY_PLUG_OUT) {
+				mvs_port_notify_formed(sas_phy, 0);
+				phy->phy_event &= ~PHY_PLUG_OUT;
+			}
+		} else {
+			mv_dprintk("plugin interrupt but phy%d is gone\n",
+				phy_no + mvi->id*mvi->chip->n_phy);
+		}
+	} else if (phy->irq_status & PHYEV_BROAD_CH) {
+		mv_dprintk("port %d broadcast change.\n",
+			phy_no + mvi->id*mvi->chip->n_phy);
+		/* exception for Samsung disk drive*/
+		mdelay(1000);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+	}
+	MVS_CHIP_DISP->write_port_irq_stat(mvi, phy_no, phy->irq_status);
+}
+
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
+{
+	u32 rx_prod_idx, rx_desc;
+	bool attn = false;
+
+	/* the first dword in the RX ring is special: it contains
+	 * a mirror of the hardware's RX producer index, so that
+	 * we don't have to stall the CPU reading that register.
+	 * The actual RX ring is offset by one dword, due to this.
+	 */
+	rx_prod_idx = mvi->rx_cons;
+	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
+		return 0;
+
+	/* The CMPL_Q may come late, read from register and try again
+	* note: if coalescing is enabled,
+	* it will need to read from register every time for sure
+	*/
+	if (unlikely(mvi->rx_cons == rx_prod_idx))
+		mvi->rx_cons = MVS_CHIP_DISP->rx_update(mvi) & RX_RING_SZ_MASK;
+
+	if (mvi->rx_cons == rx_prod_idx)
+		return 0;
+
+	while (mvi->rx_cons != rx_prod_idx) {
+		/* increment our internal RX consumer pointer */
+		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
+		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
+
+		if (likely(rx_desc & RXQ_DONE))
+			mvs_slot_complete(mvi, rx_desc, 0);
+		if (rx_desc & RXQ_ATTN) {
+			attn = true;
+		} else if (rx_desc & RXQ_ERR) {
+			if (!(rx_desc & RXQ_DONE))
+				mvs_slot_complete(mvi, rx_desc, 0);
+		} else if (rx_desc & RXQ_SLOT_RESET) {
+			mvs_slot_free(mvi, rx_desc);
+		}
+	}
+
+	if (attn && self_clear)
+		MVS_CHIP_DISP->int_full(mvi);
+	return 0;
+}
+
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
new file mode 100644
index 00000000000..aa2270af1ba
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -0,0 +1,406 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/version.h>
+#include "mv_defs.h"
+
+#define DRV_NAME		"mvsas"
+#define DRV_VERSION		"0.8.2"
+#define _MV_DUMP		0
+#define MVS_ID_NOT_MAPPED	0x7f
+/* #define DISABLE_HOTPLUG_DMA_FIX */
+#define MAX_EXP_RUNNING_REQ	2
+#define WIDE_PORT_MAX_PHY		4
+#define	MV_DISABLE_NCQ	0
+#define mv_printk(fmt, arg ...)	\
+	printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg)
+#ifdef MV_DEBUG
+#define mv_dprintk(format, arg...)	\
+	printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg)
+#else
+#define mv_dprintk(format, arg...)
+#endif
+#define MV_MAX_U32			0xffffffff
+
+extern struct mvs_tgt_initiator mvs_tgt;
+extern struct mvs_info *tgt_mvi;
+extern const struct mvs_dispatch mvs_64xx_dispatch;
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+
+#define DEV_IS_EXPANDER(type)	\
+	((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define bit(n) ((u32)1 << n)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq)			\
+	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\
+					(__mc) != 0 ;		\
+					(++__lseq), (__mc) >>= 1)
+
+#define MV_INIT_DELAYED_WORK(w, f, d)	INIT_DELAYED_WORK(w, f)
+#define UNASSOC_D2H_FIS(id)		\
+	((void *) mvi->rx_fis + 0x100 * id)
+#define SATA_RECEIVED_FIS_LIST(reg_set)	\
+	((void *) mvi->rx_fis + mvi->chip->fis_offs + 0x100 * reg_set)
+#define SATA_RECEIVED_SDB_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x58)
+#define SATA_RECEIVED_D2H_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x40)
+#define SATA_RECEIVED_PIO_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x20)
+#define SATA_RECEIVED_DMA_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x00)
+
+enum dev_status {
+	MVS_DEV_NORMAL = 0x0,
+	MVS_DEV_EH	= 0x1,
+};
+
+
+struct mvs_info;
+
+struct mvs_dispatch {
+	char *name;
+	int (*chip_init)(struct mvs_info *mvi);
+	int (*spi_init)(struct mvs_info *mvi);
+	int (*chip_ioremap)(struct mvs_info *mvi);
+	void (*chip_iounmap)(struct mvs_info *mvi);
+	irqreturn_t (*isr)(struct mvs_info *mvi, int irq, u32 stat);
+	u32 (*isr_status)(struct mvs_info *mvi, int irq);
+	void (*interrupt_enable)(struct mvs_info *mvi);
+	void (*interrupt_disable)(struct mvs_info *mvi);
+
+	u32 (*read_phy_ctl)(struct mvs_info *mvi, u32 port);
+	void (*write_phy_ctl)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_cfg_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_cfg_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_cfg_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_vsr_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_vsr_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_vsr_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_irq_stat)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_stat)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_irq_mask)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_mask)(struct mvs_info *mvi, u32 port, u32 val);
+
+	void (*get_sas_addr)(void *buf, u32 buflen);
+	void (*command_active)(struct mvs_info *mvi, u32 slot_idx);
+	void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs);
+	void (*start_delivery)(struct mvs_info *mvi, u32 tx);
+	u32 (*rx_update)(struct mvs_info *mvi);
+	void (*int_full)(struct mvs_info *mvi);
+	u8 (*assign_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	void (*free_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	u32 (*prd_size)(void);
+	u32 (*prd_count)(void);
+	void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+	void (*detect_porttype)(struct mvs_info *mvi, int i);
+	int (*oob_done)(struct mvs_info *mvi, int i);
+	void (*fix_phy_info)(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id);
+	void (*phy_work_around)(struct mvs_info *mvi, int i);
+	void (*phy_set_link_rate)(struct mvs_info *mvi, u32 phy_id,
+				struct sas_phy_linkrates *rates);
+	u32 (*phy_max_link_rate)(void);
+	void (*phy_disable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_enable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_reset)(struct mvs_info *mvi, u32 phy_id, int hard);
+	void (*stp_reset)(struct mvs_info *mvi, u32 phy_id);
+	void (*clear_active_cmds)(struct mvs_info *mvi);
+	u32 (*spi_read_data)(struct mvs_info *mvi);
+	void (*spi_write_data)(struct mvs_info *mvi, u32 data);
+	int (*spi_buildcmd)(struct mvs_info *mvi,
+						u32      *dwCmd,
+						u8       cmd,
+						u8       read,
+						u8       length,
+						u32      addr
+						);
+	int (*spi_issuecmd)(struct mvs_info *mvi, u32 cmd);
+	int (*spi_waitdataready)(struct mvs_info *mvi, u32 timeout);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	void (*dma_fix)(dma_addr_t buf_dma, int buf_len, int from, void *prd);
+#endif
+
+};
+
+struct mvs_chip_info {
+	u32 		n_host;
+	u32 		n_phy;
+	u32 		fis_offs;
+	u32 		fis_count;
+	u32 		srs_sz;
+	u32 		slot_width;
+	const struct mvs_dispatch *dispatch;
+};
+#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
+#define MVS_RX_FISL_SZ		\
+	(mvi->chip->fis_offs + (mvi->chip->fis_count * 0x100))
+#define MVS_CHIP_DISP		(mvi->chip->dispatch)
+
+struct mvs_err_info {
+	__le32			flags;
+	__le32			flags2;
+};
+
+struct mvs_cmd_hdr {
+	__le32			flags;	/* PRD tbl len; SAS, SATA ctl */
+	__le32			lens;	/* cmd, max resp frame len */
+	__le32			tags;	/* targ port xfer tag; tag */
+	__le32			data_len;	/* data xfer len */
+	__le64			cmd_tbl;  	/* command table address */
+	__le64			open_frame;	/* open addr frame address */
+	__le64			status_buf;	/* status buffer address */
+	__le64			prd_tbl;		/* PRD tbl address */
+	__le32			reserved[4];
+};
+
+struct mvs_port {
+	struct asd_sas_port	sas_port;
+	u8			port_attached;
+	u8			wide_port_phymap;
+	struct list_head	list;
+};
+
+struct mvs_phy {
+	struct mvs_info 		*mvi;
+	struct mvs_port		*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	struct timer_list timer;
+	u64		dev_sas_addr;
+	u64		att_dev_sas_addr;
+	u32		att_dev_info;
+	u32		dev_info;
+	u32		phy_type;
+	u32		phy_status;
+	u32		irq_status;
+	u32		frame_rcvd_size;
+	u8		frame_rcvd[32];
+	u8		phy_attached;
+	u8		phy_mode;
+	u8		reserved[2];
+	u32		phy_event;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct mvs_device {
+	struct list_head		dev_entry;
+	enum sas_dev_type dev_type;
+	struct mvs_info *mvi_info;
+	struct domain_device *sas_device;
+	u32 attached_phy;
+	u32 device_id;
+	u32 runing_req;
+	u8 taskfileset;
+	u8 dev_status;
+	u16 reserved;
+};
+
+struct mvs_slot_info {
+	struct list_head entry;
+	union {
+		struct sas_task *task;
+		void *tdata;
+	};
+	u32 n_elem;
+	u32 tx;
+	u32 slot_tag;
+
+	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+	 * and PRD table
+	 */
+	void *buf;
+	dma_addr_t buf_dma;
+#if _MV_DUMP
+	u32 cmd_size;
+#endif
+	void *response;
+	struct mvs_port *port;
+	struct mvs_device	*device;
+	void *open_frame;
+};
+
+struct mvs_info {
+	unsigned long flags;
+
+	/* host-wide lock */
+	spinlock_t lock;
+
+	/* our device */
+	struct pci_dev *pdev;
+	struct device *dev;
+
+	/* enhanced mode registers */
+	void __iomem *regs;
+
+	/* peripheral or soc registers */
+	void __iomem *regs_ex;
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* SCSI/SAS glue */
+	struct sas_ha_struct *sas;
+	struct Scsi_Host *shost;
+
+	/* TX (delivery) DMA ring */
+	__le32 *tx;
+	dma_addr_t tx_dma;
+
+	/* cached next-producer idx */
+	u32 tx_prod;
+
+	/* RX (completion) DMA ring */
+	__le32	*rx;
+	dma_addr_t rx_dma;
+
+	/* RX consumer idx */
+	u32 rx_cons;
+
+	/* RX'd FIS area */
+	__le32 *rx_fis;
+	dma_addr_t rx_fis_dma;
+
+	/* DMA command header slots */
+	struct mvs_cmd_hdr *slot;
+	dma_addr_t slot_dma;
+
+	u32 chip_id;
+	const struct mvs_chip_info *chip;
+
+	int tags_num;
+	DECLARE_BITMAP(tags, MVS_SLOTS);
+	/* further per-slot information */
+	struct mvs_phy phy[MVS_MAX_PHYS];
+	struct mvs_port port[MVS_MAX_PHYS];
+	u32 irq;
+	u32 exp_req;
+	u32 id;
+	u64 sata_reg_set;
+	struct list_head *hba_list;
+	struct list_head soc_entry;
+	struct list_head wq_list;
+	unsigned long instance;
+	u16 flashid;
+	u32 flashsize;
+	u32 flashsectSize;
+
+	void *addon;
+	struct mvs_device	devices[MVS_MAX_DEVICES];
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	void *bulk_buffer;
+	dma_addr_t bulk_buffer_dma;
+#define TRASH_BUCKET_SIZE    	0x20000
+#endif
+	struct mvs_slot_info slot_info[0];
+};
+
+struct mvs_prv_info{
+	u8 n_host;
+	u8 n_phy;
+	u16 reserve;
+	struct mvs_info *mvi[2];
+};
+
+struct mvs_wq {
+	struct delayed_work work_q;
+	struct mvs_info *mvi;
+	void *data;
+	int handler;
+	struct list_head entry;
+};
+
+struct mvs_task_exec_info {
+	struct sas_task *task;
+	struct mvs_cmd_hdr *hdr;
+	struct mvs_port *port;
+	u32 tag;
+	int n_elem;
+};
+
+
+/******************** function prototype *********************/
+void mvs_get_sas_addr(void *buf, u32 buflen);
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
+void mvs_tag_free(struct mvs_info *mvi, u32 tag);
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag);
+int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out);
+void mvs_tag_init(struct mvs_info *mvi);
+void mvs_iounmap(void __iomem *regs);
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex);
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard);
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata);
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+				u32 off_lo, u32 off_hi, u64 sas_addr);
+int mvs_slave_alloc(struct scsi_device *scsi_dev);
+int mvs_slave_configure(struct scsi_device *sdev);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_queue_command(struct sas_task *task, const int num,
+			gfp_t gfp_flags);
+int mvs_abort_task(struct sas_task *task);
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
+int mvs_clear_aca(struct domain_device *dev, u8 *lun);
+int mvs_clear_task_set(struct domain_device *dev, u8 * lun);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+void mvs_port_deformed(struct asd_sas_phy *sas_phy);
+int mvs_dev_found(struct domain_device *dev);
+void mvs_dev_gone(struct domain_device *dev);
+int mvs_lu_reset(struct domain_device *dev, u8 *lun);
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+int mvs_query_task(struct sas_task *task);
+void mvs_release_task(struct mvs_info *mvi, int phy_no,
+			struct domain_device *dev);
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr);
+#endif
+
diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild
index 0e207aa67d1..5fd73d77c3a 100644
--- a/drivers/scsi/osd/Kbuild
+++ b/drivers/scsi/osd/Kbuild
@@ -11,31 +11,6 @@
 # it under the terms of the GNU General Public License version 2
 #
 
-ifneq ($(OSD_INC),)
-# we are built out-of-tree Kconfigure everything as on
-
-CONFIG_SCSI_OSD_INITIATOR=m
-ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE
-
-CONFIG_SCSI_OSD_ULD=m
-ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE
-
-# CONFIG_SCSI_OSD_DPRINT_SENSE =
-#	0 - no print of errors
-#	1 - print errors
-#	2 - errors + warrnings
-ccflags-y += -DCONFIG_SCSI_OSD_DPRINT_SENSE=1
-
-# Uncomment to turn debug on
-# ccflags-y += -DCONFIG_SCSI_OSD_DEBUG
-
-# if we are built out-of-tree and the hosting kernel has OSD headers
-# then "ccflags-y +=" will not pick the out-off-tree headers. Only by doing
-# this it will work. This might break in future kernels
-LINUXINCLUDE := -I$(OSD_INC) $(LINUXINCLUDE)
-
-endif
-
 # libosd.ko - osd-initiator library
 libosd-y := osd_initiator.o
 obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o
diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile
deleted file mode 100755
index d905344f83b..00000000000
--- a/drivers/scsi/osd/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Makefile for the OSD modules (out of tree)
-#
-# Copyright (C) 2008 Panasas Inc.  All rights reserved.
-#
-# Authors:
-#   Boaz Harrosh <bharrosh@panasas.com>
-#   Benny Halevy <bhalevy@panasas.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2
-#
-# This Makefile is used to call the kernel Makefile in case of an out-of-tree
-# build.
-# $KSRC should point to a Kernel source tree otherwise host's default is
-# used. (eg. /lib/modules/`uname -r`/build)
-
-# include path for out-of-tree Headers
-OSD_INC ?= `pwd`/../../../include
-
-# allow users to override these
-# e.g. to compile for a kernel that you aren't currently running
-KSRC ?= /lib/modules/$(shell uname -r)/build
-KBUILD_OUTPUT ?=
-ARCH ?=
-V ?= 0
-
-# this is the basic Kbuild out-of-tree invocation, with the M= option
-KBUILD_BASE = +$(MAKE) -C $(KSRC) M=`pwd` KBUILD_OUTPUT=$(KBUILD_OUTPUT) ARCH=$(ARCH) V=$(V)
-
-all: libosd
-
-libosd: ;
-	$(KBUILD_BASE) OSD_INC=$(OSD_INC) modules
-
-clean:
-	$(KBUILD_BASE) clean
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 5776b2ab6b1..7a117c18114 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -118,39 +118,39 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps)
 		_osd_ver_desc(or));
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_VENDOR_IDENTIFICATION [%s]\n",
+	OSD_INFO("VENDOR_IDENTIFICATION  [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_IDENTIFICATION [%s]\n",
+	OSD_INFO("PRODUCT_IDENTIFICATION [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_MODEL [%s]\n",
+	OSD_INFO("PRODUCT_MODEL          [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n",
+	OSD_INFO("PRODUCT_REVISION_LEVEL [%u]\n",
 		pFirst ? get_unaligned_be32(pFirst) : ~0U);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n",
+	OSD_INFO("PRODUCT_SERIAL_NUMBER  [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_OSD_NAME [%s]\n", (char *)pFirst);
+	OSD_INFO("OSD_NAME               [%s]\n", (char *)pFirst);
 	a++;
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n",
+	OSD_INFO("TOTAL_CAPACITY         [0x%llx]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n",
+	OSD_INFO("USED_CAPACITY          [0x%llx]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n",
+	OSD_INFO("NUMBER_OF_PARTITIONS   [%llu]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	if (a >= nelem)
@@ -158,7 +158,7 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps)
 
 	/* FIXME: Where are the time utilities */
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_CLOCK [0x%02x%02x%02x%02x%02x%02x]\n",
+	OSD_INFO("CLOCK                  [0x%02x%02x%02x%02x%02x%02x]\n",
 		((char *)pFirst)[0], ((char *)pFirst)[1],
 		((char *)pFirst)[2], ((char *)pFirst)[3],
 		((char *)pFirst)[4], ((char *)pFirst)[5]);
@@ -169,7 +169,8 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps)
 
 		hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1,
 				   sid_dump, sizeof(sid_dump), true);
-		OSD_INFO("OSD_ATTR_RI_OSD_SYSTEM_ID(%d) [%s]\n", len, sid_dump);
+		OSD_INFO("OSD_SYSTEM_ID(%d)\n"
+			 "        [%s]\n", len, sid_dump);
 		a++;
 	}
 out:
@@ -669,7 +670,7 @@ static int _osd_req_list_objects(struct osd_request *or,
 	__be16 action, const struct osd_obj_id *obj, osd_id initial_id,
 	struct osd_obj_id_list *list, unsigned nelem)
 {
-	struct request_queue *q = or->osd_dev->scsi_device->request_queue;
+	struct request_queue *q = osd_request_queue(or->osd_dev);
 	u64 len = nelem * sizeof(osd_id) + sizeof(*list);
 	struct bio *bio;
 
@@ -778,16 +779,32 @@ EXPORT_SYMBOL(osd_req_remove_object);
 */
 
 void osd_req_write(struct osd_request *or,
-	const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+	const struct osd_obj_id *obj, u64 offset,
+	struct bio *bio, u64 len)
 {
-	_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, bio->bi_size);
+	_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len);
 	WARN_ON(or->out.bio || or->out.total_bytes);
-	bio->bi_rw |= (1 << BIO_RW);
+	WARN_ON(0 ==  bio_rw_flagged(bio, BIO_RW));
 	or->out.bio = bio;
-	or->out.total_bytes = bio->bi_size;
+	or->out.total_bytes = len;
 }
 EXPORT_SYMBOL(osd_req_write);
 
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+	struct request_queue *req_q = osd_request_queue(or->osd_dev);
+	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
+
+	bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+	osd_req_write(or, obj, offset, bio, len);
+	return 0;
+}
+EXPORT_SYMBOL(osd_req_write_kern);
+
 /*TODO: void osd_req_append(struct osd_request *,
 	const struct osd_obj_id *, struct bio *data_out); */
 /*TODO: void osd_req_create_write(struct osd_request *,
@@ -813,16 +830,31 @@ void osd_req_flush_object(struct osd_request *or,
 EXPORT_SYMBOL(osd_req_flush_object);
 
 void osd_req_read(struct osd_request *or,
-	const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+	const struct osd_obj_id *obj, u64 offset,
+	struct bio *bio, u64 len)
 {
-	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, bio->bi_size);
+	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
 	WARN_ON(or->in.bio || or->in.total_bytes);
-	bio->bi_rw &= ~(1 << BIO_RW);
+	WARN_ON(1 == bio_rw_flagged(bio, BIO_RW));
 	or->in.bio = bio;
-	or->in.total_bytes = bio->bi_size;
+	or->in.total_bytes = len;
 }
 EXPORT_SYMBOL(osd_req_read);
 
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+	struct request_queue *req_q = osd_request_queue(or->osd_dev);
+	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
+
+	osd_req_read(or, obj, offset, bio, len);
+	return 0;
+}
+EXPORT_SYMBOL(osd_req_read_kern);
+
 void osd_req_get_attributes(struct osd_request *or,
 	const struct osd_obj_id *obj)
 {
@@ -1213,7 +1245,7 @@ static inline void osd_sec_parms_set_in_offset(bool is_v1,
 }
 
 static int _osd_req_finalize_data_integrity(struct osd_request *or,
-	bool has_in, bool has_out, const u8 *cap_key)
+	bool has_in, bool has_out, u64 out_data_bytes, const u8 *cap_key)
 {
 	struct osd_security_parameters *sec_parms = _osd_req_sec_params(or);
 	int ret;
@@ -1228,8 +1260,7 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
 		};
 		unsigned pad;
 
-		or->out_data_integ.data_bytes = cpu_to_be64(
-			or->out.bio ? or->out.bio->bi_size : 0);
+		or->out_data_integ.data_bytes = cpu_to_be64(out_data_bytes);
 		or->out_data_integ.set_attributes_bytes = cpu_to_be64(
 			or->set_attr.total_bytes);
 		or->out_data_integ.get_attributes_bytes = cpu_to_be64(
@@ -1306,6 +1337,8 @@ static int _init_blk_request(struct osd_request *or,
 
 	or->request = req;
 	req->cmd_type = REQ_TYPE_BLOCK_PC;
+	req->cmd_flags |= REQ_QUIET;
+
 	req->timeout = or->timeout;
 	req->retries = or->retries;
 	req->sense = or->sense;
@@ -1339,6 +1372,7 @@ int osd_finalize_request(struct osd_request *or,
 {
 	struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb);
 	bool has_in, has_out;
+	u64 out_data_bytes = or->out.total_bytes;
 	int ret;
 
 	if (options & OSD_REQ_FUA)
@@ -1388,7 +1422,8 @@ int osd_finalize_request(struct osd_request *or,
 		}
 	}
 
-	ret = _osd_req_finalize_data_integrity(or, has_in, has_out, cap_key);
+	ret = _osd_req_finalize_data_integrity(or, has_in, has_out,
+					       out_data_bytes, cap_key);
 	if (ret)
 		return ret;
 
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index 22b59e13ba8..0bdef339090 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -49,6 +49,7 @@
 #include <linux/device.h>
 #include <linux/idr.h>
 #include <linux/major.h>
+#include <linux/file.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_driver.h>
@@ -175,10 +176,9 @@ static const struct file_operations osd_fops = {
 
 struct osd_dev *osduld_path_lookup(const char *name)
 {
-	struct path path;
-	struct inode *inode;
-	struct cdev *cdev;
-	struct osd_uld_device *uninitialized_var(oud);
+	struct osd_uld_device *oud;
+	struct osd_dev *od;
+	struct file *file;
 	int error;
 
 	if (!name || !*name) {
@@ -186,52 +186,46 @@ struct osd_dev *osduld_path_lookup(const char *name)
 		return ERR_PTR(-EINVAL);
 	}
 
-	error = kern_path(name, LOOKUP_FOLLOW, &path);
-	if (error) {
-		OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
-		return ERR_PTR(error);
-	}
+	od = kzalloc(sizeof(*od), GFP_KERNEL);
+	if (!od)
+		return ERR_PTR(-ENOMEM);
 
-	inode = path.dentry->d_inode;
-	error = -EINVAL; /* Not the right device e.g osd_uld_device */
-	if (!S_ISCHR(inode->i_mode)) {
-		OSD_DEBUG("!S_ISCHR()\n");
-		goto out;
+	file = filp_open(name, O_RDWR, 0);
+	if (IS_ERR(file)) {
+		error = PTR_ERR(file);
+		goto free_od;
 	}
 
-	cdev = inode->i_cdev;
-	if (!cdev) {
-		OSD_ERR("Before mounting an OSD Based filesystem\n");
-		OSD_ERR("  user-mode must open+close the %s device\n", name);
-		OSD_ERR("  Example: bash: echo < %s\n", name);
-		goto out;
+	if (file->f_op != &osd_fops){
+		error = -EINVAL;
+		goto close_file;
 	}
 
-	/* The Magic wand. Is it our char-dev */
-	/* TODO: Support sg devices */
-	if (cdev->owner != THIS_MODULE) {
-		OSD_ERR("Error mounting %s - is not an OSD device\n", name);
-		goto out;
-	}
+	oud = file->private_data;
 
-	oud = container_of(cdev, struct osd_uld_device, cdev);
+	*od = oud->od;
+	od->file = file;
 
-	__uld_get(oud);
-	error = 0;
+	return od;
 
-out:
-	path_put(&path);
-	return error ? ERR_PTR(error) : &oud->od;
+close_file:
+	fput(file);
+free_od:
+	kfree(od);
+	return ERR_PTR(error);
 }
 EXPORT_SYMBOL(osduld_path_lookup);
 
 void osduld_put_device(struct osd_dev *od)
 {
-	if (od) {
-		struct osd_uld_device *oud = container_of(od,
-						struct osd_uld_device, od);
 
-		__uld_put(oud);
+	if (od && !IS_ERR(od)) {
+		struct osd_uld_device *oud = od->file->private_data;
+
+		BUG_ON(od->scsi_device != oud->od.scsi_device);
+
+		fput(od->file);
+		kfree(od);
 	}
 }
 EXPORT_SYMBOL(osduld_put_device);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5defe5ea5ed..8371d917a9a 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,12 @@
 * General Public License for more details.
 *
 ******************************************************************************/
-#define QLA1280_VERSION      "3.26"
+#define QLA1280_VERSION      "3.27"
 /*****************************************************************************
     Revision History:
+    Rev  3.27, February 10, 2009, Michael Reed
+	- General code cleanup.
+	- Improve error recovery.
     Rev  3.26, January 16, 2006 Jes Sorensen
 	- Ditch all < 2.6 support
     Rev  3.25.1, February 10, 2005 Christoph Hellwig
@@ -435,7 +438,6 @@ static int qla1280_mailbox_command(struct scsi_qla_host *,
 				   uint8_t, uint16_t *);
 static int qla1280_bus_reset(struct scsi_qla_host *, int);
 static int qla1280_device_reset(struct scsi_qla_host *, int, int);
-static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
 static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
 static int qla1280_abort_isp(struct scsi_qla_host *);
 #ifdef QLA_64BIT_PTR
@@ -698,7 +700,7 @@ qla1280_info(struct Scsi_Host *host)
 }
 
 /**************************************************************************
- *   qla1200_queuecommand
+ *   qla1280_queuecommand
  *     Queue a command to the controller.
  *
  * Note:
@@ -713,12 +715,14 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-	struct srb *sp = (struct srb *)&cmd->SCp;
+	struct srb *sp = (struct srb *)CMD_SP(cmd);
 	int status;
 
 	cmd->scsi_done = fn;
 	sp->cmd = cmd;
 	sp->flags = 0;
+	sp->wait = NULL;
+	CMD_HANDLE(cmd) = (unsigned char *)NULL;
 
 	qla1280_print_scsi_cmd(5, cmd);
 
@@ -738,21 +742,11 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 
 enum action {
 	ABORT_COMMAND,
-	ABORT_DEVICE,
 	DEVICE_RESET,
 	BUS_RESET,
 	ADAPTER_RESET,
-	FAIL
 };
 
-/* timer action for error action processor */
-static void qla1280_error_wait_timeout(unsigned long __data)
-{
-	struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
-	struct srb *sp = (struct srb *)CMD_SP(cmd);
-
-	complete(sp->wait);
-}
 
 static void qla1280_mailbox_timeout(unsigned long __data)
 {
@@ -767,8 +761,67 @@ static void qla1280_mailbox_timeout(unsigned long __data)
 	complete(ha->mailbox_wait);
 }
 
+static int
+_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
+				 struct completion *wait)
+{
+	int	status = FAILED;
+	struct scsi_cmnd *cmd = sp->cmd;
+
+	spin_unlock_irq(ha->host->host_lock);
+	wait_for_completion_timeout(wait, 4*HZ);
+	spin_lock_irq(ha->host->host_lock);
+	sp->wait = NULL;
+	if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
+		status = SUCCESS;
+		(*cmd->scsi_done)(cmd);
+	}
+	return status;
+}
+
+static int
+qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
+{
+	DECLARE_COMPLETION_ONSTACK(wait);
+
+	sp->wait = &wait;
+	return _qla1280_wait_for_single_command(ha, sp, &wait);
+}
+
+static int
+qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
+{
+	int		cnt;
+	int		status;
+	struct srb	*sp;
+	struct scsi_cmnd *cmd;
+
+	status = SUCCESS;
+
+	/*
+	 * Wait for all commands with the designated bus/target
+	 * to be completed by the firmware
+	 */
+	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = ha->outstanding_cmds[cnt];
+		if (sp) {
+			cmd = sp->cmd;
+
+			if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
+				continue;
+			if (target >= 0 && SCSI_TCN_32(cmd) != target)
+				continue;
+
+			status = qla1280_wait_for_single_command(ha, sp);
+			if (status == FAILED)
+				break;
+		}
+	}
+	return status;
+}
+
 /**************************************************************************
- * qla1200_error_action
+ * qla1280_error_action
  *    The function will attempt to perform a specified error action and
  *    wait for the results (or time out).
  *
@@ -780,11 +833,6 @@ static void qla1280_mailbox_timeout(unsigned long __data)
  * Returns:
  *      SUCCESS or FAILED
  *
- * Note:
- *      Resetting the bus always succeeds - is has to, otherwise the
- *      kernel will panic! Try a surgical technique - sending a BUS
- *      DEVICE RESET message - on the offending target before pulling
- *      the SCSI bus reset line.
  **************************************************************************/
 static int
 qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
@@ -792,13 +840,19 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 	struct scsi_qla_host *ha;
 	int bus, target, lun;
 	struct srb *sp;
-	uint16_t data;
-	unsigned char *handle;
-	int result, i;
+	int i, found;
+	int result=FAILED;
+	int wait_for_bus=-1;
+	int wait_for_target = -1;
 	DECLARE_COMPLETION_ONSTACK(wait);
-	struct timer_list timer;
+
+	ENTER("qla1280_error_action");
 
 	ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
+	sp = (struct srb *)CMD_SP(cmd);
+	bus = SCSI_BUS_32(cmd);
+	target = SCSI_TCN_32(cmd);
+	lun = SCSI_LUN_32(cmd);
 
 	dprintk(4, "error_action %i, istatus 0x%04x\n", action,
 		RD_REG_WORD(&ha->iobase->istatus));
@@ -807,99 +861,47 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 		RD_REG_WORD(&ha->iobase->host_cmd),
 		RD_REG_WORD(&ha->iobase->ictrl), jiffies);
 
-	ENTER("qla1280_error_action");
 	if (qla1280_verbose)
 		printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
 		       "Handle=0x%p, action=0x%x\n",
 		       ha->host_no, cmd, CMD_HANDLE(cmd), action);
 
-	if (cmd == NULL) {
-		printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
-		       "si_Cmnd pointer, failing.\n");
-		LEAVE("qla1280_error_action");
-		return FAILED;
-	}
-
-	ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
-	sp = (struct srb *)CMD_SP(cmd);
-	handle = CMD_HANDLE(cmd);
-
-	/* Check for pending interrupts. */
-	data = qla1280_debounce_register(&ha->iobase->istatus);
-	/*
-	 * The io_request_lock is held when the reset handler is called, hence
-	 * the interrupt handler cannot be running in parallel as it also
-	 * grabs the lock. /Jes
-	 */
-	if (data & RISC_INT)
-		qla1280_isr(ha, &ha->done_q);
-
 	/*
-	 * Determine the suggested action that the mid-level driver wants
-	 * us to perform.
+	 * Check to see if we have the command in the outstanding_cmds[]
+	 * array.  If not then it must have completed before this error
+	 * action was initiated.  If the error_action isn't ABORT_COMMAND
+	 * then the driver must proceed with the requested action.
 	 */
-	if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
-		if(action == ABORT_COMMAND) {
-			/* we never got this command */
-			printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
-			return SUCCESS;	/* no action - we don't have command */
+	found = -1;
+	for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
+		if (sp == ha->outstanding_cmds[i]) {
+			found = i;
+			sp->wait = &wait; /* we'll wait for it to complete */
+			break;
 		}
-	} else {
-		sp->wait = &wait;
 	}
 
-	bus = SCSI_BUS_32(cmd);
-	target = SCSI_TCN_32(cmd);
-	lun = SCSI_LUN_32(cmd);
+	if (found < 0) {	/* driver doesn't have command */
+		result = SUCCESS;
+		if (qla1280_verbose) {
+			printk(KERN_INFO
+			       "scsi(%ld:%d:%d:%d): specified command has "
+			       "already completed.\n", ha->host_no, bus,
+				target, lun);
+		}
+	}
 
-	/* Overloading result.  Here it means the success or fail of the
-	 * *issue* of the action.  When we return from the routine, it must
-	 * mean the actual success or fail of the action */
-	result = FAILED;
 	switch (action) {
-	case FAIL:
-		break;
 
 	case ABORT_COMMAND:
-		if ((sp->flags & SRB_ABORT_PENDING)) {
-			printk(KERN_WARNING
-			       "scsi(): Command has a pending abort "
-			       "message - ABORT_PENDING.\n");
-			/* This should technically be impossible since we
-			 * now wait for abort completion */
-			break;
-		}
-
-		for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
-			if (sp == ha->outstanding_cmds[i]) {
-				dprintk(1, "qla1280: RISC aborting command\n");
-				if (qla1280_abort_command(ha, sp, i) == 0)
-					result = SUCCESS;
-				else {
-					/*
-					 * Since we don't know what might
-					 * have happend to the command, it
-					 * is unsafe to remove it from the
-					 * device's queue at this point.
-					 * Wait and let the escalation
-					 * process take care of it.
-					 */
-					printk(KERN_WARNING
-					       "scsi(%li:%i:%i:%i): Unable"
-					       " to abort command!\n",
-					       ha->host_no, bus, target, lun);
-				}
-			}
-		}
-		break;
-
-	case ABORT_DEVICE:
-		if (qla1280_verbose)
-			printk(KERN_INFO
-			       "scsi(%ld:%d:%d:%d): Queueing abort device "
-			       "command.\n", ha->host_no, bus, target, lun);
-		if (qla1280_abort_device(ha, bus, target, lun) == 0)
-			result = SUCCESS;
+		dprintk(1, "qla1280: RISC aborting command\n");
+		/*
+		 * The abort might fail due to race when the host_lock
+		 * is released to issue the abort.  As such, we
+		 * don't bother to check the return status.
+		 */
+		if (found >= 0)
+			qla1280_abort_command(ha, sp, found);
 		break;
 
 	case DEVICE_RESET:
@@ -907,16 +909,21 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 			printk(KERN_INFO
 			       "scsi(%ld:%d:%d:%d): Queueing device reset "
 			       "command.\n", ha->host_no, bus, target, lun);
-		if (qla1280_device_reset(ha, bus, target) == 0)
-			result = SUCCESS;
+		if (qla1280_device_reset(ha, bus, target) == 0) {
+			/* issued device reset, set wait conditions */
+			wait_for_bus = bus;
+			wait_for_target = target;
+		}
 		break;
 
 	case BUS_RESET:
 		if (qla1280_verbose)
 			printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
 			       "reset.\n", ha->host_no, bus);
-		if (qla1280_bus_reset(ha, bus) == 0)
-			result = SUCCESS;
+		if (qla1280_bus_reset(ha, bus) == 0) {
+			/* issued bus reset, set wait conditions */
+			wait_for_bus = bus;
+		}
 		break;
 
 	case ADAPTER_RESET:
@@ -929,55 +936,48 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 			       "continue automatically\n", ha->host_no);
 		}
 		ha->flags.reset_active = 1;
-		/*
-		 * We restarted all of the commands automatically, so the
-		 * mid-level code can expect completions momentitarily.
-		 */
-		if (qla1280_abort_isp(ha) == 0)
-			result = SUCCESS;
+
+		if (qla1280_abort_isp(ha) != 0) {	/* it's dead */
+			result = FAILED;
+		}
 
 		ha->flags.reset_active = 0;
 	}
 
-	if (!list_empty(&ha->done_q))
-		qla1280_done(ha);
-
-	/* If we didn't manage to issue the action, or we have no
-	 * command to wait for, exit here */
-	if (result == FAILED || handle == NULL ||
-	    handle == (unsigned char *)INVALID_HANDLE) {
-		/*
-		 * Clear completion queue to avoid qla1280_done() trying
-		 * to complete the command at a later stage after we
-		 * have exited the current context
-		 */
-		sp->wait = NULL;
-		goto leave;
-	}
+	/*
+	 * At this point, the host_lock has been released and retaken
+	 * by the issuance of the mailbox command.
+	 * Wait for the command passed in by the mid-layer if it
+	 * was found by the driver.  It might have been returned
+	 * between eh recovery steps, hence the check of the "found"
+	 * variable.
+	 */
 
-	/* set up a timer just in case we're really jammed */
-	init_timer(&timer);
-	timer.expires = jiffies + 4*HZ;
-	timer.data = (unsigned long)cmd;
-	timer.function = qla1280_error_wait_timeout;
-	add_timer(&timer);
+	if (found >= 0)
+		result = _qla1280_wait_for_single_command(ha, sp, &wait);
 
-	/* wait for the action to complete (or the timer to expire) */
-	spin_unlock_irq(ha->host->host_lock);
-	wait_for_completion(&wait);
-	del_timer_sync(&timer);
-	spin_lock_irq(ha->host->host_lock);
-	sp->wait = NULL;
+	if (action == ABORT_COMMAND && result != SUCCESS) {
+		printk(KERN_WARNING
+		       "scsi(%li:%i:%i:%i): "
+		       "Unable to abort command!\n",
+		       ha->host_no, bus, target, lun);
+	}
 
-	/* the only action we might get a fail for is abort */
-	if (action == ABORT_COMMAND) {
-		if(sp->flags & SRB_ABORTED)
-			result = SUCCESS;
-		else
-			result = FAILED;
+	/*
+	 * If the command passed in by the mid-layer has been
+	 * returned by the board, then wait for any additional
+	 * commands which are supposed to complete based upon
+	 * the error action.
+	 *
+	 * All commands are unconditionally returned during a
+	 * call to qla1280_abort_isp(), ADAPTER_RESET.  No need
+	 * to wait for them.
+	 */
+	if (result == SUCCESS && wait_for_bus >= 0) {
+		result = qla1280_wait_for_pending_commands(ha,
+					wait_for_bus, wait_for_target);
 	}
 
- leave:
 	dprintk(1, "RESET returning %d\n", result);
 
 	LEAVE("qla1280_error_action");
@@ -1280,13 +1280,12 @@ qla1280_done(struct scsi_qla_host *ha)
 		switch ((CMD_RESULT(cmd) >> 16)) {
 		case DID_RESET:
 			/* Issue marker command. */
-			qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
+			if (!ha->flags.abort_isp_active)
+				qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
 			break;
 		case DID_ABORT:
 			sp->flags &= ~SRB_ABORT_PENDING;
 			sp->flags |= SRB_ABORTED;
-			if (sp->flags & SRB_TIMEOUT)
-				CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
 			break;
 		default:
 			break;
@@ -1296,12 +1295,11 @@ qla1280_done(struct scsi_qla_host *ha)
 		scsi_dma_unmap(cmd);
 
 		/* Call the mid-level driver interrupt handler */
-		CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
 		ha->actthreads--;
 
-		(*(cmd)->scsi_done)(cmd);
-
-		if(sp->wait != NULL)
+		if (sp->wait == NULL)
+			(*(cmd)->scsi_done)(cmd);
+		else
 			complete(sp->wait);
 	}
 	LEAVE("qla1280_done");
@@ -2417,9 +2415,6 @@ static int
 qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
 {
 	struct device_reg __iomem *reg = ha->iobase;
-#if 0
-	LIST_HEAD(done_q);
-#endif
 	int status = 0;
 	int cnt;
 	uint16_t *optr, *iptr;
@@ -2493,19 +2488,9 @@ qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
 	mr = MAILBOX_REGISTER_COUNT;
 	memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
 
-#if 0
-	/* Go check for any response interrupts pending. */
-	qla1280_isr(ha, &done_q);
-#endif
-
 	if (ha->flags.reset_marker)
 		qla1280_rst_aen(ha);
 
-#if 0
-	if (!list_empty(&done_q))
-		qla1280_done(ha, &done_q);
-#endif
-
 	if (status)
 		dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
 			"0x%x ****\n", mb[0]);
@@ -2641,41 +2626,6 @@ qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
 }
 
 /*
- * qla1280_abort_device
- *      Issue an abort message to the device
- *
- * Input:
- *      ha     = adapter block pointer.
- *      bus    = SCSI BUS.
- *      target = SCSI ID.
- *      lun    = SCSI LUN.
- *
- * Returns:
- *      0 = success
- */
-static int
-qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
-{
-	uint16_t mb[MAILBOX_REGISTER_COUNT];
-	int status;
-
-	ENTER("qla1280_abort_device");
-
-	mb[0] = MBC_ABORT_DEVICE;
-	mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
-	status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
-
-	/* Issue marker command. */
-	qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
-
-	if (status)
-		dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
-
-	LEAVE("qla1280_abort_device");
-	return status;
-}
-
-/*
  * qla1280_abort_command
  *      Abort command aborts a specified IOCB.
  *
@@ -2833,7 +2783,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	/* If room for request in request ring. */
 	if ((req_cnt + 2) >= ha->req_q_cnt) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_start_scsi: in-ptr=0x%x  req_q_cnt="
 			"0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
 			req_cnt);
@@ -2845,7 +2795,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 		     ha->outstanding_cmds[cnt] != NULL; cnt++);
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_start_scsi: NO ROOM IN "
 			"OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
 		goto out;
@@ -3108,7 +3058,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 		ha->req_q_cnt, seg_cnt);
 	/* If room for request in request ring. */
 	if ((req_cnt + 2) >= ha->req_q_cnt) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
 			"req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
 			ha->req_q_cnt, req_cnt);
@@ -3120,7 +3070,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 		     (ha->outstanding_cmds[cnt] != 0); cnt++) ;
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
 			"ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
 		goto out;
@@ -3487,6 +3437,7 @@ qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
 
 					/* Save ISP completion status */
 					CMD_RESULT(sp->cmd) = 0;
+					CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
 
 					/* Place block on done queue */
 					list_add_tail(&sp->list, done_q);
@@ -3495,7 +3446,7 @@ qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
 					 * If we get here we have a real problem!
 					 */
 					printk(KERN_WARNING
-					       "qla1280: ISP invalid handle");
+					       "qla1280: ISP invalid handle\n");
 				}
 			}
 			break;
@@ -3753,6 +3704,8 @@ qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
 		}
 	}
 
+	CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
 	/* Place command on done queue. */
 	list_add_tail(&sp->list, done_q);
  out:
@@ -3808,6 +3761,8 @@ qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
 			CMD_RESULT(sp->cmd) = DID_ERROR << 16;
 		}
 
+		CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
 		/* Place command on done queue. */
 		list_add_tail(&sp->list, done_q);
 	}
@@ -3858,19 +3813,16 @@ qla1280_abort_isp(struct scsi_qla_host *ha)
 		struct scsi_cmnd *cmd;
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
-
 			cmd = sp->cmd;
 			CMD_RESULT(cmd) = DID_RESET << 16;
-
-			sp->cmd = NULL;
+			CMD_HANDLE(cmd) = COMPLETED_HANDLE;
 			ha->outstanding_cmds[cnt] = NULL;
-
-			(*cmd->scsi_done)(cmd);
-
-			sp->flags = 0;
+			list_add_tail(&sp->list, &ha->done_q);
 		}
 	}
 
+	qla1280_done(ha);
+
 	status = qla1280_load_firmware(ha);
 	if (status)
 		goto out;
@@ -3955,13 +3907,6 @@ qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
 
 		if (scsi_control == SCSI_PHASE_INVALID) {
 			ha->bus_settings[bus].scsi_bus_dead = 1;
-#if 0
-			CMD_RESULT(cp) = DID_NO_CONNECT << 16;
-			CMD_HANDLE(cp) = INVALID_HANDLE;
-			/* ha->actthreads--; */
-
-			(*(cp)->scsi_done)(cp);
-#endif
 			return 1;	/* bus is dead */
 		} else {
 			ha->bus_settings[bus].scsi_bus_dead = 0;
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index d7c44b8d2b4..834884b9eed 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -88,7 +88,8 @@
 
 /* Maximum outstanding commands in ISP queues */
 #define MAX_OUTSTANDING_COMMANDS	512
-#define INVALID_HANDLE			(MAX_OUTSTANDING_COMMANDS + 2)
+#define COMPLETED_HANDLE		((unsigned char *) \
+					(MAX_OUTSTANDING_COMMANDS + 2))
 
 /* ISP request and response entry counts (37-65535) */
 #define REQUEST_ENTRY_CNT		255 /* Number of request entries. */
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index b09993a0657..0f879620150 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -97,7 +97,7 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj,
 		return 0;
 
 	if (IS_NOCACHE_VPD_TYPE(ha))
-		ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_nvram << 2,
+		ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2,
 		    ha->nvram_size);
 	return memory_read_from_buffer(buf, count, &off, ha->nvram,
 					ha->nvram_size);
@@ -692,6 +692,109 @@ static struct bin_attribute sysfs_edc_status_attr = {
 	.read = qla2x00_sysfs_read_edc_status,
 };
 
+static ssize_t
+qla2x00_sysfs_read_xgmac_stats(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	struct qla_hw_data *ha = vha->hw;
+	int rval;
+	uint16_t actual_size;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count > XGMAC_DATA_SIZE)
+		return 0;
+
+	if (ha->xgmac_data)
+		goto do_read;
+
+	ha->xgmac_data = dma_alloc_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+	    &ha->xgmac_data_dma, GFP_KERNEL);
+	if (!ha->xgmac_data) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to allocate memory for XGMAC read-data.\n");
+		return 0;
+	}
+
+do_read:
+	actual_size = 0;
+	memset(ha->xgmac_data, 0, XGMAC_DATA_SIZE);
+
+	rval = qla2x00_get_xgmac_stats(vha, ha->xgmac_data_dma,
+	    XGMAC_DATA_SIZE, &actual_size);
+	if (rval != QLA_SUCCESS) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to read XGMAC data (%x).\n", rval);
+		count = 0;
+	}
+
+	count = actual_size > count ? count: actual_size;
+	memcpy(buf, ha->xgmac_data, count);
+
+	return count;
+}
+
+static struct bin_attribute sysfs_xgmac_stats_attr = {
+	.attr = {
+		.name = "xgmac_stats",
+		.mode = S_IRUSR,
+	},
+	.size = 0,
+	.read = qla2x00_sysfs_read_xgmac_stats,
+};
+
+static ssize_t
+qla2x00_sysfs_read_dcbx_tlv(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	struct qla_hw_data *ha = vha->hw;
+	int rval;
+	uint16_t actual_size;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count > DCBX_TLV_DATA_SIZE)
+		return 0;
+
+	if (ha->dcbx_tlv)
+		goto do_read;
+
+	ha->dcbx_tlv = dma_alloc_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+	    &ha->dcbx_tlv_dma, GFP_KERNEL);
+	if (!ha->dcbx_tlv) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to allocate memory for DCBX TLV read-data.\n");
+		return 0;
+	}
+
+do_read:
+	actual_size = 0;
+	memset(ha->dcbx_tlv, 0, DCBX_TLV_DATA_SIZE);
+
+	rval = qla2x00_get_dcbx_params(vha, ha->dcbx_tlv_dma,
+	    DCBX_TLV_DATA_SIZE);
+	if (rval != QLA_SUCCESS) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to read DCBX TLV data (%x).\n", rval);
+		count = 0;
+	}
+
+	memcpy(buf, ha->dcbx_tlv, count);
+
+	return count;
+}
+
+static struct bin_attribute sysfs_dcbx_tlv_attr = {
+	.attr = {
+		.name = "dcbx_tlv",
+		.mode = S_IRUSR,
+	},
+	.size = 0,
+	.read = qla2x00_sysfs_read_dcbx_tlv,
+};
+
 static struct sysfs_entry {
 	char *name;
 	struct bin_attribute *attr;
@@ -706,6 +809,8 @@ static struct sysfs_entry {
 	{ "reset", &sysfs_reset_attr, },
 	{ "edc", &sysfs_edc_attr, 2 },
 	{ "edc_status", &sysfs_edc_status_attr, 2 },
+	{ "xgmac_stats", &sysfs_xgmac_stats_attr, 3 },
+	{ "dcbx_tlv", &sysfs_dcbx_tlv_attr, 3 },
 	{ NULL },
 };
 
@@ -721,6 +826,8 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *vha)
 			continue;
 		if (iter->is4GBp_only == 2 && !IS_QLA25XX(vha->hw))
 			continue;
+		if (iter->is4GBp_only == 3 && !IS_QLA81XX(vha->hw))
+			continue;
 
 		ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
@@ -743,6 +850,8 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *vha)
 			continue;
 		if (iter->is4GBp_only == 2 && !IS_QLA25XX(ha))
 			continue;
+		if (iter->is4GBp_only == 3 && !IS_QLA81XX(ha))
+			continue;
 
 		sysfs_remove_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
@@ -1088,6 +1197,58 @@ qla2x00_flash_block_size_show(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "0x%x\n", ha->fdt_block_size);
 }
 
+static ssize_t
+qla2x00_vlan_id_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA81XX(vha->hw))
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", vha->fcoe_vlan_id);
+}
+
+static ssize_t
+qla2x00_vn_port_mac_address_show(struct device *dev,
+    struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA81XX(vha->hw))
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+	    vha->fcoe_vn_port_mac[5], vha->fcoe_vn_port_mac[4],
+	    vha->fcoe_vn_port_mac[3], vha->fcoe_vn_port_mac[2],
+	    vha->fcoe_vn_port_mac[1], vha->fcoe_vn_port_mac[0]);
+}
+
+static ssize_t
+qla2x00_fabric_param_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", vha->hw->switch_cap);
+}
+
+static ssize_t
+qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+	int rval;
+	uint16_t state[5];
+
+	rval = qla2x00_get_firmware_state(vha, state);
+	if (rval != QLA_SUCCESS)
+		memset(state, -1, sizeof(state));
+
+	return snprintf(buf, PAGE_SIZE, "0x%x 0x%x 0x%x 0x%x 0x%x\n", state[0],
+	    state[1], state[2], state[3], state[4]);
+}
+
 static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
 static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
 static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -1116,6 +1277,11 @@ static DEVICE_ATTR(mpi_version, S_IRUGO, qla2x00_mpi_version_show, NULL);
 static DEVICE_ATTR(phy_version, S_IRUGO, qla2x00_phy_version_show, NULL);
 static DEVICE_ATTR(flash_block_size, S_IRUGO, qla2x00_flash_block_size_show,
 		   NULL);
+static DEVICE_ATTR(vlan_id, S_IRUGO, qla2x00_vlan_id_show, NULL);
+static DEVICE_ATTR(vn_port_mac_address, S_IRUGO,
+		   qla2x00_vn_port_mac_address_show, NULL);
+static DEVICE_ATTR(fabric_param, S_IRUGO, qla2x00_fabric_param_show, NULL);
+static DEVICE_ATTR(fw_state, S_IRUGO, qla2x00_fw_state_show, NULL);
 
 struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_driver_version,
@@ -1138,6 +1304,10 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_mpi_version,
 	&dev_attr_phy_version,
 	&dev_attr_flash_block_size,
+	&dev_attr_vlan_id,
+	&dev_attr_vn_port_mac_address,
+	&dev_attr_fabric_param,
+	&dev_attr_fw_state,
 	NULL,
 };
 
@@ -1313,7 +1483,8 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
 	 */
-	if (fcport->loop_id != FC_NO_LOOP_ID)
+	if (fcport->loop_id != FC_NO_LOOP_ID &&
+	    !test_bit(UNLOADING, &fcport->vha->dpc_flags))
 		fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
 			fcport->loop_id, fcport->d_id.b.domain,
 			fcport->d_id.b.area, fcport->d_id.b.al_pa);
@@ -1437,11 +1608,13 @@ static int
 qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 {
 	int	ret = 0;
-	int	cnt = 0;
-	uint8_t	qos = QLA_DEFAULT_QUE_QOS;
+	uint8_t	qos = 0;
 	scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
 	scsi_qla_host_t *vha = NULL;
 	struct qla_hw_data *ha = base_vha->hw;
+	uint16_t options = 0;
+	int	cnt;
+	struct req_que *req = ha->req_q_map[0];
 
 	ret = qla24xx_vport_create_req_sanity_check(fc_vport);
 	if (ret) {
@@ -1497,23 +1670,39 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	qla24xx_vport_disable(fc_vport, disable);
 
-	/* Create a queue pair for the vport */
-	if (ha->mqenable) {
-		if (ha->npiv_info) {
-			for (; cnt < ha->nvram_npiv_size; cnt++) {
-				if (ha->npiv_info[cnt].port_name ==
-					vha->port_name &&
-					ha->npiv_info[cnt].node_name ==
-					vha->node_name) {
-					qos = ha->npiv_info[cnt].q_qos;
-					break;
-				}
-			}
+	if (ql2xmultique_tag) {
+		req = ha->req_q_map[1];
+		goto vport_queue;
+	} else if (ql2xmaxqueues == 1 || !ha->npiv_info)
+		goto vport_queue;
+	/* Create a request queue in QoS mode for the vport */
+	for (cnt = 0; cnt < ha->nvram_npiv_size; cnt++) {
+		if (memcmp(ha->npiv_info[cnt].port_name, vha->port_name, 8) == 0
+			&& memcmp(ha->npiv_info[cnt].node_name, vha->node_name,
+					8) == 0) {
+			qos = ha->npiv_info[cnt].q_qos;
+			break;
+		}
+	}
+	if (qos) {
+		ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, 0,
+			qos);
+		if (!ret)
+			qla_printk(KERN_WARNING, ha,
+			"Can't create request queue for vp_idx:%d\n",
+			vha->vp_idx);
+		else {
+			DEBUG2(qla_printk(KERN_INFO, ha,
+			"Request Que:%d (QoS: %d) created for vp_idx:%d\n",
+			ret, qos, vha->vp_idx));
+			req = ha->req_q_map[ret];
 		}
-		qla25xx_create_queues(vha, qos);
 	}
 
+vport_queue:
+	vha->req = req;
 	return 0;
+
 vport_create_failed_2:
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
@@ -1554,8 +1743,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 		    vha->host_no, vha->vp_idx, vha));
         }
 
-	if (ha->mqenable) {
-		if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+	if (vha->req->id && !ql2xmultique_tag) {
+		if (qla25xx_delete_req_que(vha, vha->req) != QLA_SUCCESS)
 			qla_printk(KERN_WARNING, ha,
 				"Queue delete failed.\n");
 	}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 34760f8d4f1..4a990f4da4e 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -149,11 +149,9 @@ qla24xx_pause_risc(struct device_reg_24xx __iomem *reg)
 	int rval = QLA_SUCCESS;
 	uint32_t cnt;
 
-	if (RD_REG_DWORD(&reg->hccr) & HCCRX_RISC_PAUSE)
-		return rval;
-
 	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
-	for (cnt = 30000; (RD_REG_DWORD(&reg->hccr) & HCCRX_RISC_PAUSE) == 0 &&
+	for (cnt = 30000;
+	    ((RD_REG_DWORD(&reg->host_status) & HSRX_RISC_PAUSED) == 0) &&
 	    rval == QLA_SUCCESS; cnt--) {
 		if (cnt)
 			udelay(100);
@@ -351,7 +349,7 @@ static inline void *
 qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 {
 	uint32_t cnt, que_idx;
-	uint8_t req_cnt, rsp_cnt, que_cnt;
+	uint8_t que_cnt;
 	struct qla2xxx_mq_chain *mq = ptr;
 	struct device_reg_25xxmq __iomem *reg;
 
@@ -363,9 +361,8 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 	mq->type = __constant_htonl(DUMP_CHAIN_MQ);
 	mq->chain_size = __constant_htonl(sizeof(struct qla2xxx_mq_chain));
 
-	req_cnt = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
-	rsp_cnt = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
-	que_cnt = req_cnt > rsp_cnt ? req_cnt : rsp_cnt;
+	que_cnt = ha->max_req_queues > ha->max_rsp_queues ?
+		ha->max_req_queues : ha->max_rsp_queues;
 	mq->count = htonl(que_cnt);
 	for (cnt = 0; cnt < que_cnt; cnt++) {
 		reg = (struct device_reg_25xxmq *) ((void *)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 714ee67567e..00aa48d975a 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -93,6 +93,7 @@
 #define LSD(x)	((uint32_t)((uint64_t)(x)))
 #define MSD(x)	((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
 
+#define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
 
 /*
  * I/O register
@@ -179,6 +180,7 @@
 #define REQUEST_ENTRY_CNT_24XX		2048	/* Number of request entries. */
 #define RESPONSE_ENTRY_CNT_2100		64	/* Number of response entries.*/
 #define RESPONSE_ENTRY_CNT_2300		512	/* Number of response entries.*/
+#define RESPONSE_ENTRY_CNT_MQ		128	/* Number of response entries.*/
 
 struct req_que;
 
@@ -186,7 +188,6 @@ struct req_que;
  * SCSI Request Block
  */
 typedef struct srb {
-	struct req_que *que;
 	struct fc_port *fcport;
 
 	struct scsi_cmnd *cmd;		/* Linux SCSI command pkt */
@@ -2008,7 +2009,7 @@ typedef struct vport_params {
 #define VP_RET_CODE_NOT_FOUND		6
 
 struct qla_hw_data;
-
+struct rsp_que;
 /*
  * ISP operations
  */
@@ -2030,10 +2031,9 @@ struct isp_operations {
 	void (*enable_intrs) (struct qla_hw_data *);
 	void (*disable_intrs) (struct qla_hw_data *);
 
-	int (*abort_command) (struct scsi_qla_host *, srb_t *,
-		struct req_que *);
-	int (*target_reset) (struct fc_port *, unsigned int);
-	int (*lun_reset) (struct fc_port *, unsigned int);
+	int (*abort_command) (srb_t *);
+	int (*target_reset) (struct fc_port *, unsigned int, int);
+	int (*lun_reset) (struct fc_port *, unsigned int, int);
 	int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
 		uint8_t, uint8_t, uint16_t *, uint8_t);
 	int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
@@ -2079,7 +2079,6 @@ struct isp_operations {
 #define QLA_PCI_MSIX_CONTROL	0xa2
 
 struct scsi_qla_host;
-struct rsp_que;
 
 struct qla_msix_entry {
 	int have_irq;
@@ -2140,7 +2139,6 @@ struct qla_statistics {
 #define MBC_INITIALIZE_MULTIQ 0x1f
 #define QLA_QUE_PAGE 0X1000
 #define QLA_MQ_SIZE 32
-#define QLA_MAX_HOST_QUES 16
 #define QLA_MAX_QUEUES 256
 #define ISP_QUE_REG(ha, id) \
 	((ha->mqenable) ? \
@@ -2170,6 +2168,8 @@ struct rsp_que {
 	struct qla_hw_data *hw;
 	struct qla_msix_entry *msix;
 	struct req_que *req;
+	srb_t *status_srb; /* status continuation entry */
+	struct work_struct q_work;
 };
 
 /* Request queue data structure */
@@ -2222,6 +2222,8 @@ struct qla_hw_data {
 		uint32_t	fce_enabled		:1;
 		uint32_t	fac_supported		:1;
 		uint32_t	chip_reset_done		:1;
+		uint32_t	port0			:1;
+		uint32_t	running_gold_fw		:1;
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -2246,7 +2248,8 @@ struct qla_hw_data {
 	struct rsp_que **rsp_q_map;
 	unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
 	unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
-	uint16_t 	max_queues;
+	uint8_t 	max_req_queues;
+	uint8_t 	max_rsp_queues;
 	struct qla_npiv_entry *npiv_info;
 	uint16_t	nvram_npiv_size;
 
@@ -2255,6 +2258,9 @@ struct qla_hw_data {
 #define FLOGI_MID_SUPPORT       BIT_10
 #define FLOGI_VSAN_SUPPORT      BIT_12
 #define FLOGI_SP_SUPPORT        BIT_13
+
+	uint8_t		port_no;		/* Physical port of adapter */
+
 	/* Timeout timers. */
 	uint8_t 	loop_down_abort_time;    /* port down timer */
 	atomic_t	loop_down_timer;         /* loop down timer */
@@ -2392,6 +2398,14 @@ struct qla_hw_data {
 	dma_addr_t	edc_data_dma;
 	uint16_t	edc_data_len;
 
+#define XGMAC_DATA_SIZE	PAGE_SIZE
+	void		*xgmac_data;
+	dma_addr_t	xgmac_data_dma;
+
+#define DCBX_TLV_DATA_SIZE PAGE_SIZE
+	void		*dcbx_tlv;
+	dma_addr_t	dcbx_tlv_dma;
+
 	struct task_struct	*dpc_thread;
 	uint8_t dpc_active;                  /* DPC routine is active */
 
@@ -2510,6 +2524,7 @@ struct qla_hw_data {
 	uint32_t        flt_region_vpd;
 	uint32_t        flt_region_nvram;
 	uint32_t        flt_region_npiv_conf;
+	uint32_t	flt_region_gold_fw;
 
 	/* Needed for BEACON */
 	uint16_t        beacon_blink_led;
@@ -2536,6 +2551,7 @@ struct qla_hw_data {
 	struct qla_chip_state_84xx *cs84xx;
 	struct qla_statistics qla_stats;
 	struct isp_operations *isp_ops;
+	struct workqueue_struct *wq;
 };
 
 /*
@@ -2545,6 +2561,8 @@ typedef struct scsi_qla_host {
 	struct list_head list;
 	struct list_head vp_fcports;	/* list of fcports */
 	struct list_head work_list;
+	spinlock_t work_lock;
+
 	/* Commonly used flags and state information. */
 	struct Scsi_Host *host;
 	unsigned long	host_no;
@@ -2591,8 +2609,6 @@ typedef struct scsi_qla_host {
 #define SWITCH_FOUND		BIT_0
 #define DFLG_NO_CABLE		BIT_1
 
-	srb_t		*status_srb;	/* Status continuation entry. */
-
 	/* ISP configuration data. */
 	uint16_t	loop_id;		/* Host adapter loop id */
 
@@ -2618,6 +2634,11 @@ typedef struct scsi_qla_host {
 	uint8_t		node_name[WWN_SIZE];
 	uint8_t		port_name[WWN_SIZE];
 	uint8_t		fabric_node_name[WWN_SIZE];
+
+	uint16_t	fcoe_vlan_id;
+	uint16_t	fcoe_fcf_idx;
+	uint8_t		fcoe_vn_port_mac[6];
+
 	uint32_t   	vp_abort_cnt;
 
 	struct fc_vport	*fc_vport;	/* holds fc_vport * for each vport */
@@ -2643,7 +2664,7 @@ typedef struct scsi_qla_host {
 #define VP_ERR_FAB_LOGOUT	4
 #define VP_ERR_ADAP_NORESOURCES	5
 	struct qla_hw_data *hw;
-	int	req_ques[QLA_MAX_HOST_QUES];
+	struct req_que *req;
 } scsi_qla_host_t;
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 96ccb9642ba..dfde2dd865c 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -878,7 +878,6 @@ struct device_reg_24xx {
 					/* HCCR statuses. */
 #define HCCRX_HOST_INT		BIT_6	/* Host to RISC interrupt bit. */
 #define HCCRX_RISC_RESET	BIT_5	/* RISC Reset mode bit. */
-#define HCCRX_RISC_PAUSE	BIT_4	/* RISC Pause mode bit. */
 					/* HCCR commands. */
 					/* NOOP. */
 #define HCCRX_NOOP		0x00000000
@@ -1241,6 +1240,7 @@ struct qla_flt_header {
 #define FLT_REG_HW_EVENT_1	0x1f
 #define FLT_REG_NPIV_CONF_0	0x29
 #define FLT_REG_NPIV_CONF_1	0x2a
+#define FLT_REG_GOLD_FW		0x2f
 
 struct qla_flt_region {
 	uint32_t code;
@@ -1405,6 +1405,8 @@ struct access_chip_rsp_84xx {
 #define MBC_IDC_ACK		0x101
 #define MBC_RESTART_MPI_FW	0x3d
 #define MBC_FLASH_ACCESS_CTRL	0x3e	/* Control flash access. */
+#define MBC_GET_XGMAC_STATS	0x7a
+#define MBC_GET_DCBX_PARAMS	0x51
 
 /* Flash access control option field bit definitions */
 #define FAC_OPT_FORCE_SEMAPHORE		BIT_15
@@ -1711,7 +1713,7 @@ struct ex_init_cb_81xx {
 #define FA_VPD0_ADDR_81		0xD0000
 #define FA_VPD1_ADDR_81		0xD0400
 #define FA_NVRAM0_ADDR_81	0xD0080
-#define FA_NVRAM1_ADDR_81	0xD0480
+#define FA_NVRAM1_ADDR_81	0xD0180
 #define FA_FEATURE_ADDR_81	0xD4000
 #define FA_FLASH_DESCR_ADDR_81	0xD8000
 #define FA_FLASH_LAYOUT_ADDR_81	0xD8400
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 528913f6bed..65b12d82867 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -65,8 +65,11 @@ extern int ql2xfdmienable;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xqfullrampup;
+extern int ql2xqfulltracking;
 extern int ql2xiidmaenable;
 extern int ql2xmaxqueues;
+extern int ql2xmultique_tag;
+extern int ql2xfwloadbin;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -145,7 +148,7 @@ qla2x00_dump_ram(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
 extern int
 qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
 
-extern void
+extern int
 qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *,
     uint16_t *, uint32_t *, uint8_t *, uint32_t *, uint8_t *);
 
@@ -165,13 +168,13 @@ extern int
 qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
 
 extern int
-qla2x00_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
+qla2x00_abort_command(srb_t *);
 
 extern int
-qla2x00_abort_target(struct fc_port *, unsigned int);
+qla2x00_abort_target(struct fc_port *, unsigned int, int);
 
 extern int
-qla2x00_lun_reset(struct fc_port *, unsigned int);
+qla2x00_lun_reset(struct fc_port *, unsigned int, int);
 
 extern int
 qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
@@ -236,9 +239,11 @@ extern int
 qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *,
     dma_addr_t);
 
-extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
-extern int qla24xx_abort_target(struct fc_port *, unsigned int);
-extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
+extern int qla24xx_abort_command(srb_t *);
+extern int
+qla24xx_abort_target(struct fc_port *, unsigned int, int);
+extern int
+qla24xx_lun_reset(struct fc_port *, unsigned int, int);
 
 extern int
 qla2x00_system_error(scsi_qla_host_t *);
@@ -288,6 +293,18 @@ qla81xx_fac_do_write_enable(scsi_qla_host_t *, int);
 extern int
 qla81xx_fac_erase_sector(scsi_qla_host_t *, uint32_t, uint32_t);
 
+extern int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t *);
+
+extern int
+qla2x00_get_dcbx_params(scsi_qla_host_t *, dma_addr_t, uint16_t);
+
+extern int
+qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *);
+
+extern int
+qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
@@ -295,8 +312,8 @@ extern irqreturn_t qla2100_intr_handler(int, void *);
 extern irqreturn_t qla2300_intr_handler(int, void *);
 extern irqreturn_t qla24xx_intr_handler(int, void *);
 extern void qla2x00_process_response_queue(struct rsp_que *);
-extern void qla24xx_process_response_queue(struct rsp_que *);
-
+extern void
+qla24xx_process_response_queue(struct scsi_qla_host *, struct rsp_que *);
 extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *);
 extern void qla2x00_free_irqs(scsi_qla_host_t *);
 
@@ -401,19 +418,21 @@ extern int qla25xx_request_irq(struct rsp_que *);
 extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
 extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
-	uint16_t, uint8_t, uint8_t);
+	uint16_t, int, uint8_t);
 extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
-	uint16_t);
+	uint16_t, int);
 extern int qla25xx_update_req_que(struct scsi_qla_host *, uint8_t, uint8_t);
 extern void qla2x00_init_response_q_entries(struct rsp_que *);
 extern int qla25xx_delete_req_que(struct scsi_qla_host *, struct req_que *);
 extern int qla25xx_delete_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_queues(struct scsi_qla_host *, uint8_t);
-extern int qla25xx_delete_queues(struct scsi_qla_host *, uint8_t);
+extern int qla25xx_delete_queues(struct scsi_qla_host *);
 extern uint16_t qla24xx_rd_req_reg(struct qla_hw_data *, uint16_t);
 extern uint16_t qla25xx_rd_req_reg(struct qla_hw_data *, uint16_t);
 extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
+extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
+
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 557f58d5bf8..917534b9f22 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1107,7 +1107,7 @@ qla2x00_mgmt_svr_login(scsi_qla_host_t *vha)
 		return ret;
 
 	ha->isp_ops->fabric_login(vha, vha->mgmt_svr_loop_id, 0xff, 0xff, 0xfa,
-	    mb, BIT_1);
+	    mb, BIT_1|BIT_0);
 	if (mb[0] != MBS_COMMAND_COMPLETE) {
 		DEBUG2_13(printk("%s(%ld): Failed MANAGEMENT_SERVER login: "
 		    "loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x\n",
@@ -1879,6 +1879,9 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list)
 			case BIT_13:
 				list[i].fp_speed = PORT_SPEED_4GB;
 				break;
+			case BIT_12:
+				list[i].fp_speed = PORT_SPEED_10GB;
+				break;
 			case BIT_11:
 				list[i].fp_speed = PORT_SPEED_8GB;
 				break;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bd7dd84c064..26202612932 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -634,7 +634,7 @@ qla2x00_chip_diag(scsi_qla_host_t *vha)
 		goto chip_diag_failed;
 
 	DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
-	    ha->host_no));
+	    vha->host_no));
 
 	/* Reset RISC processor. */
 	WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
@@ -655,7 +655,7 @@ qla2x00_chip_diag(scsi_qla_host_t *vha)
 		goto chip_diag_failed;
 
 	/* Check product ID of chip */
-	DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", ha->host_no));
+	DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", vha->host_no));
 
 	mb[1] = RD_MAILBOX_REG(ha, reg, 1);
 	mb[2] = RD_MAILBOX_REG(ha, reg, 2);
@@ -730,9 +730,6 @@ qla24xx_chip_diag(scsi_qla_host_t *vha)
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
 
-	/* Perform RISC reset. */
-	qla24xx_reset_risc(vha);
-
 	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;
 
 	rval = qla2x00_mbx_reg_test(vha);
@@ -786,7 +783,6 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 		    sizeof(uint32_t);
 		if (ha->mqenable)
 			mq_size = sizeof(struct qla2xxx_mq_chain);
-
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
 			goto try_eft;
@@ -850,8 +846,7 @@ cont_alloc:
 	rsp_q_size = rsp->length * sizeof(response_t);
 
 	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
-	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
-	    eft_size;
+	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size;
 	ha->chain_offset = dump_size;
 	dump_size += mq_size + fce_size;
 
@@ -891,6 +886,56 @@ cont_alloc:
 	    htonl(offsetof(struct qla2xxx_fw_dump, isp));
 }
 
+static int
+qla81xx_mpi_sync(scsi_qla_host_t *vha)
+{
+#define MPS_MASK	0xe0
+	int rval;
+	uint16_t dc;
+	uint32_t dw;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_SUCCESS;
+
+	rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to acquire semaphore.\n"));
+		goto done;
+	}
+
+	pci_read_config_word(vha->hw->pdev, 0x54, &dc);
+	rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to read sync.\n"));
+		goto done_release;
+	}
+
+	dc &= MPS_MASK;
+	if (dc == (dw & MPS_MASK))
+		goto done_release;
+
+	dw &= ~MPS_MASK;
+	dw |= dc;
+	rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to gain sync.\n"));
+	}
+
+done_release:
+	rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to release semaphore.\n"));
+	}
+
+done:
+	return rval;
+}
+
 /**
  * qla2x00_setup_chip() - Load and start RISC firmware.
  * @ha: HA context
@@ -915,6 +960,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	}
 
+	qla81xx_mpi_sync(vha);
+
 	/* Load firmware sequences */
 	rval = ha->isp_ops->load_risc(vha, &srisc_address);
 	if (rval == QLA_SUCCESS) {
@@ -931,13 +978,16 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			/* Retrieve firmware information. */
 			if (rval == QLA_SUCCESS) {
 				fw_major_version = ha->fw_major_version;
-				qla2x00_get_fw_version(vha,
+				rval = qla2x00_get_fw_version(vha,
 				    &ha->fw_major_version,
 				    &ha->fw_minor_version,
 				    &ha->fw_subminor_version,
 				    &ha->fw_attributes, &ha->fw_memory_size,
 				    ha->mpi_version, &ha->mpi_capabilities,
 				    ha->phy_version);
+				if (rval != QLA_SUCCESS)
+					goto failed;
+
 				ha->flags.npiv_supported = 0;
 				if (IS_QLA2XXX_MIDTYPE(ha) &&
 					 (ha->fw_attributes & BIT_2)) {
@@ -989,7 +1039,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			    ha->fw_subminor_version);
 		}
 	}
-
+failed:
 	if (rval) {
 		DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
 		    vha->host_no));
@@ -1013,12 +1063,14 @@ qla2x00_init_response_q_entries(struct rsp_que *rsp)
 	uint16_t cnt;
 	response_t *pkt;
 
+	rsp->ring_ptr = rsp->ring;
+	rsp->ring_index    = 0;
+	rsp->status_srb = NULL;
 	pkt = rsp->ring_ptr;
 	for (cnt = 0; cnt < rsp->length; cnt++) {
 		pkt->signature = RESPONSE_PROCESSED;
 		pkt++;
 	}
-
 }
 
 /**
@@ -1176,7 +1228,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
 		if (ha->flags.msix_enabled) {
 			msix = &ha->msix_entries[1];
 			DEBUG2_17(printk(KERN_INFO
-			"Reistering vector 0x%x for base que\n", msix->entry));
+			"Registering vector 0x%x for base que\n", msix->entry));
 			icb->msix = cpu_to_le16(msix->entry);
 		}
 		/* Use alternate PCI bus number */
@@ -1230,14 +1282,14 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
 	/* Clear outstanding commands array. */
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
-		for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
 			req->outstanding_cmds[cnt] = NULL;
 
-		req->current_outstanding_cmd = 0;
+		req->current_outstanding_cmd = 1;
 
 		/* Initialize firmware. */
 		req->ring_ptr  = req->ring;
@@ -1245,13 +1297,10 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 		req->cnt      = req->length;
 	}
 
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_rsp_queues; que++) {
 		rsp = ha->rsp_q_map[que];
 		if (!rsp)
 			continue;
-		rsp->ring_ptr = rsp->ring;
-		rsp->ring_index    = 0;
-
 		/* Initialize response queue entries */
 		qla2x00_init_response_q_entries(rsp);
 	}
@@ -1307,7 +1356,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 	unsigned long	wtime, mtime, cs84xx_time;
 	uint16_t	min_wait;	/* Minimum wait time if loop is down */
 	uint16_t	wait_time;	/* Wait time if loop is coming ready */
-	uint16_t	state[3];
+	uint16_t	state[5];
 	struct qla_hw_data *ha = vha->hw;
 
 	rval = QLA_SUCCESS;
@@ -1406,8 +1455,9 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 		    vha->host_no, state[0], jiffies));
 	} while (1);
 
-	DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
-	    vha->host_no, state[0], jiffies));
+	DEBUG(printk("scsi(%ld): fw_state=%x (%x, %x, %x, %x) curr time=%lx.\n",
+	    vha->host_no, state[0], state[1], state[2], state[3], state[4],
+	    jiffies));
 
 	if (rval) {
 		DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
@@ -1541,6 +1591,7 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
 	char *st, *en;
 	uint16_t index;
 	struct qla_hw_data *ha = vha->hw;
+	int use_tbl = !IS_QLA25XX(ha) && !IS_QLA81XX(ha);
 
 	if (memcmp(model, BINZERO, len) != 0) {
 		strncpy(ha->model_number, model, len);
@@ -1553,14 +1604,16 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
 		}
 
 		index = (ha->pdev->subsystem_device & 0xff);
-		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+		if (use_tbl &&
+		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES)
 			strncpy(ha->model_desc,
 			    qla2x00_model_name[index * 2 + 1],
 			    sizeof(ha->model_desc) - 1);
 	} else {
 		index = (ha->pdev->subsystem_device & 0xff);
-		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+		if (use_tbl &&
+		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES) {
 			strcpy(ha->model_number,
 			    qla2x00_model_name[index * 2]);
@@ -2061,8 +2114,10 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 	if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
 		if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
 			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
-		if (test_bit(RSCN_UPDATE, &save_flags))
+		if (test_bit(RSCN_UPDATE, &save_flags)) {
 			set_bit(RSCN_UPDATE, &vha->dpc_flags);
+			vha->flags.rscn_queue_overflow = 1;
+		}
 	}
 
 	return (rval);
@@ -2110,7 +2165,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 		goto cleanup_allocation;
 
 	DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
-	    ha->host_no, entries));
+	    vha->host_no, entries));
 	DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
 	    entries * sizeof(struct gid_list_info)));
 
@@ -2243,7 +2298,8 @@ static void
 qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 #define LS_UNKNOWN      2
-	static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
+	static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
+	char *link_speed;
 	int rval;
 	uint16_t mb[6];
 	struct qla_hw_data *ha = vha->hw;
@@ -2266,10 +2322,15 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		    fcport->port_name[6], fcport->port_name[7], rval,
 		    fcport->fp_speed, mb[0], mb[1]));
 	} else {
+		link_speed = link_speeds[LS_UNKNOWN];
+		if (fcport->fp_speed < 5)
+			link_speed = link_speeds[fcport->fp_speed];
+		else if (fcport->fp_speed == 0x13)
+			link_speed = link_speeds[5];
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "iIDMA adjusted to %s GB/s on "
 		    "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
-		    link_speeds[fcport->fp_speed], fcport->port_name[0],
+		    link_speed, fcport->port_name[0],
 		    fcport->port_name[1], fcport->port_name[2],
 		    fcport->port_name[3], fcport->port_name[4],
 		    fcport->port_name[5], fcport->port_name[6],
@@ -3180,9 +3241,14 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
 {
 	int rval = QLA_SUCCESS;
 	uint32_t wait_time;
-	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
-	struct rsp_que *rsp = req->rsp;
+	struct req_que *req;
+	struct rsp_que *rsp;
+
+	if (ql2xmultique_tag)
+		req = vha->hw->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
 
 	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
@@ -3448,7 +3514,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 	int ret = -1;
 	int i;
 
-	for (i = 1; i < ha->max_queues; i++) {
+	for (i = 1; i < ha->max_rsp_queues; i++) {
 		rsp = ha->rsp_q_map[i];
 		if (rsp) {
 			rsp->options &= ~BIT_0;
@@ -3462,6 +3528,8 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 					"%s Rsp que:%d inited\n", __func__,
 						rsp->id));
 		}
+	}
+	for (i = 1; i < ha->max_req_queues; i++) {
 		req = ha->req_q_map[i];
 		if (req) {
 		/* Clear outstanding commands array. */
@@ -3566,14 +3634,15 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	nv = ha->nvram;
 
 	/* Determine NVRAM starting address. */
-	ha->nvram_size = sizeof(struct nvram_24xx);
-	ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
-	ha->vpd_size = FA_NVRAM_VPD_SIZE;
-	ha->vpd_base = FA_NVRAM_VPD0_ADDR;
-	if (PCI_FUNC(ha->pdev->devfn)) {
+	if (ha->flags.port0) {
+		ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+		ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+	} else {
 		ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
 		ha->vpd_base = FA_NVRAM_VPD1_ADDR;
 	}
+	ha->nvram_size = sizeof(struct nvram_24xx);
+	ha->vpd_size = FA_NVRAM_VPD_SIZE;
 
 	/* Get VPD data into cache */
 	ha->vpd = ha->nvram + VPD_OFFSET;
@@ -3587,7 +3656,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
 		chksum += le32_to_cpu(*dptr++);
 
-	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
 	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
 
 	/* Bad NVRAM data, set defaults parameters. */
@@ -3612,7 +3681,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->hard_address = __constant_cpu_to_le16(124);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -3798,11 +3867,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 }
 
 static int
-qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
+    uint32_t faddr)
 {
 	int	rval = QLA_SUCCESS;
 	int	segments, fragment;
-	uint32_t faddr;
 	uint32_t *dcode, dlen;
 	uint32_t risc_addr;
 	uint32_t risc_size;
@@ -3811,12 +3880,11 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	struct req_que *req = ha->req_q_map[0];
 
 	qla_printk(KERN_INFO, ha,
-	    "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+	    "FW: Loading from flash (%x)...\n", faddr);
 
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
-	faddr = ha->flt_region_fw;
 	dcode = (uint32_t *)req->ring;
 	*srisc_addr = 0;
 
@@ -4104,6 +4172,9 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int rval;
 
+	if (ql2xfwloadbin == 1)
+		return qla81xx_load_risc(vha, srisc_addr);
+
 	/*
 	 * FW Load priority:
 	 * 1) Firmware via request-firmware interface (.bin file).
@@ -4113,24 +4184,45 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	if (rval == QLA_SUCCESS)
 		return rval;
 
-	return qla24xx_load_risc_flash(vha, srisc_addr);
+	return qla24xx_load_risc_flash(vha, srisc_addr,
+	    vha->hw->flt_region_fw);
 }
 
 int
 qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int rval;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ql2xfwloadbin == 2)
+		goto try_blob_fw;
 
 	/*
 	 * FW Load priority:
 	 * 1) Firmware residing in flash.
 	 * 2) Firmware via request-firmware interface (.bin file).
+	 * 3) Golden-Firmware residing in flash -- limited operation.
 	 */
-	rval = qla24xx_load_risc_flash(vha, srisc_addr);
+	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
 	if (rval == QLA_SUCCESS)
 		return rval;
 
-	return qla24xx_load_risc_blob(vha, srisc_addr);
+try_blob_fw:
+	rval = qla24xx_load_risc_blob(vha, srisc_addr);
+	if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
+		return rval;
+
+	qla_printk(KERN_ERR, ha,
+	    "FW: Attempting to fallback to golden firmware...\n");
+	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
+	if (rval != QLA_SUCCESS)
+		return rval;
+
+	qla_printk(KERN_ERR, ha,
+	    "FW: Please update operational firmware...\n");
+	ha->flags.running_gold_fw = 1;
+
+	return rval;
 }
 
 void
@@ -4146,7 +4238,7 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 
 	ret = qla2x00_stop_firmware(vha);
 	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
-	    retries ; retries--) {
+	    ret != QLA_INVALID_COMMAND && retries ; retries--) {
 		ha->isp_ops->reset_chip(vha);
 		if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
 			continue;
@@ -4165,13 +4257,19 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha)
 	uint16_t mb[MAILBOX_REGISTER_COUNT];
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
-	struct rsp_que *rsp = req->rsp;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	if (!vha->vp_idx)
 		return -EINVAL;
 
 	rval = qla2x00_fw_ready(base_vha);
+	if (ql2xmultique_tag)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
+
 	if (rval == QLA_SUCCESS) {
 		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
 		qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
@@ -4305,7 +4403,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
 		chksum += le32_to_cpu(*dptr++);
 
-	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
 	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
 
 	/* Bad NVRAM data, set defaults parameters. */
@@ -4329,7 +4427,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -4358,12 +4456,12 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		nv->max_luns_per_target = __constant_cpu_to_le16(128);
 		nv->port_down_retry_count = __constant_cpu_to_le16(30);
 		nv->link_down_timeout = __constant_cpu_to_le16(30);
-		nv->enode_mac[0] = 0x01;
+		nv->enode_mac[0] = 0x00;
 		nv->enode_mac[1] = 0x02;
 		nv->enode_mac[2] = 0x03;
 		nv->enode_mac[3] = 0x04;
 		nv->enode_mac[4] = 0x05;
-		nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		nv->enode_mac[5] = 0x06 + ha->port_no;
 
 		rval = 1;
 	}
@@ -4396,7 +4494,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		icb->enode_mac[2] = 0x03;
 		icb->enode_mac[3] = 0x04;
 		icb->enode_mac[4] = 0x05;
-		icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		icb->enode_mac[5] = 0x06 + ha->port_no;
 	}
 
 	/* Use extended-initialization control block. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index a8abbb95730..13396beae2c 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -15,6 +15,7 @@ static request_t *qla2x00_req_pkt(struct scsi_qla_host *, struct req_que *,
 							struct rsp_que *rsp);
 static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
 
+static void qla25xx_set_que(srb_t *, struct rsp_que **);
 /**
  * qla2x00_get_cmd_direction() - Determine control_flag data direction.
  * @cmd: SCSI command
@@ -92,9 +93,10 @@ qla2x00_calc_iocbs_64(uint16_t dsds)
  * Returns a pointer to the Continuation Type 0 IOCB packet.
  */
 static inline cont_entry_t *
-qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
+qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
 {
 	cont_entry_t *cont_pkt;
+	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -120,10 +122,11 @@ qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
  * Returns a pointer to the continuation type 1 IOCB packet.
  */
 static inline cont_a64_entry_t *
-qla2x00_prep_cont_type1_iocb(struct req_que *req, scsi_qla_host_t *vha)
+qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
 {
 	cont_a64_entry_t *cont_pkt;
 
+	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -159,7 +162,6 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 	struct scsi_cmnd *cmd;
 	struct scatterlist *sg;
 	int i;
-	struct req_que *req;
 
 	cmd = sp->cmd;
 
@@ -174,8 +176,6 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
-
 	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Three DSDs are available in the Command Type 2 IOCB */
@@ -192,7 +192,7 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 			 * Seven DSDs are available in the Continuation
 			 * Type 0 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type0_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type0_iocb(vha);
 			cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
 			avail_dsds = 7;
 		}
@@ -220,7 +220,6 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 	struct scsi_cmnd *cmd;
 	struct scatterlist *sg;
 	int i;
-	struct req_que *req;
 
 	cmd = sp->cmd;
 
@@ -235,8 +234,6 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
-
 	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Two DSDs are available in the Command Type 3 IOCB */
@@ -254,7 +251,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -353,7 +350,6 @@ qla2x00_start_scsi(srb_t *sp)
 	/* Build command packet */
 	req->current_outstanding_cmd = handle;
 	req->outstanding_cmds[handle] = sp;
-	sp->que = req;
 	sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
 	req->cnt -= req_cnt;
 
@@ -453,6 +449,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
 			mrk24->lun[2] = MSB(lun);
 			host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
 			mrk24->vp_index = vha->vp_idx;
+			mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle);
 		} else {
 			SET_TARGET_ID(ha, mrk->target, loop_id);
 			mrk->lun = cpu_to_le16(lun);
@@ -531,9 +528,6 @@ qla2x00_req_pkt(struct scsi_qla_host *vha, struct req_que *req,
 			for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
 				*dword_ptr++ = 0;
 
-			/* Set system defined field. */
-			pkt->sys_define = (uint8_t)req->ring_index;
-
 			/* Set entry count. */
 			pkt->entry_count = 1;
 
@@ -656,7 +650,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
+	req = vha->req;
 
 	/* Set transfer direction */
 	if (cmd->sc_data_direction == DMA_TO_DEVICE) {
@@ -687,7 +681,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -724,19 +718,13 @@ qla24xx_start_scsi(srb_t *sp)
 	struct scsi_cmnd *cmd = sp->cmd;
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
-	uint16_t que_id;
 
 	/* Setup device pointers. */
 	ret = 0;
-	que_id = vha->req_ques[0];
 
-	req = ha->req_q_map[que_id];
-	sp->que = req;
+	qla25xx_set_que(sp, &rsp);
+	req = vha->req;
 
-	if (req->rsp)
-		rsp = req->rsp;
-	else
-		rsp = ha->rsp_q_map[que_id];
 	/* So we know we haven't pci_map'ed anything yet */
 	tot_dsds = 0;
 
@@ -794,7 +782,7 @@ qla24xx_start_scsi(srb_t *sp)
 	req->cnt -= req_cnt;
 
 	cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
-	cmd_pkt->handle = handle;
+	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	/*    tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -823,6 +811,8 @@ qla24xx_start_scsi(srb_t *sp)
 
 	/* Set total data segment count. */
 	cmd_pkt->entry_count = (uint8_t)req_cnt;
+	/* Specify response queue number where completion should happen */
+	cmd_pkt->entry_status = (uint8_t) rsp->id;
 	wmb();
 
 	/* Adjust ring index. */
@@ -842,7 +832,7 @@ qla24xx_start_scsi(srb_t *sp)
 	/* Manage unprocessed RIO/ZIO commands in response queue. */
 	if (vha->flags.process_response_queue &&
 		rsp->ring_ptr->signature != RESPONSE_PROCESSED)
-		qla24xx_process_response_queue(rsp);
+		qla24xx_process_response_queue(vha, rsp);
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return QLA_SUCCESS;
@@ -855,3 +845,16 @@ queuing_error:
 
 	return QLA_FUNCTION_FAILED;
 }
+
+static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp)
+{
+	struct scsi_cmnd *cmd = sp->cmd;
+	struct qla_hw_data *ha = sp->fcport->vha->hw;
+	int affinity = cmd->request->cpu;
+
+	if (ql2xmultique_tag && affinity >= 0 &&
+		affinity < ha->max_rsp_queues - 1)
+		*rsp = ha->rsp_q_map[affinity + 1];
+	 else
+		*rsp = ha->rsp_q_map[0];
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d04981848e5..c8d0a176fea 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -13,10 +13,9 @@ static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
 static void qla2x00_process_completed_request(struct scsi_qla_host *,
 	struct req_que *, uint32_t);
 static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
-static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
+static void qla2x00_status_cont_entry(struct rsp_que *, sts_cont_entry_t *);
 static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 	sts_entry_t *);
-static struct scsi_qla_host *qla2x00_get_rsp_host(struct rsp_que *);
 
 /**
  * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
@@ -51,7 +50,7 @@ qla2100_intr_handler(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		hccr = RD_REG_WORD(&reg->hccr);
 		if (hccr & HCCR_RISC_PAUSE) {
@@ -147,7 +146,7 @@ qla2300_intr_handler(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
 		if (stat & HSR_RISC_PAUSED) {
@@ -685,7 +684,7 @@ skip_rio:
 		    vha->host_no));
 
 		if (IS_FWI2_CAPABLE(ha))
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 		else
 			qla2x00_process_response_queue(rsp);
 		break;
@@ -766,7 +765,10 @@ qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data)
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = NULL;
 
-	req = ha->req_q_map[vha->req_ques[0]];
+	if (!ql2xqfulltracking)
+		return;
+
+	req = vha->req;
 	if (!req)
 		return;
 	if (req->max_q_depth <= sdev->queue_depth)
@@ -808,6 +810,9 @@ qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req,
 	fc_port_t *fcport;
 	struct scsi_device *sdev;
 
+	if (!ql2xqfulltracking)
+		return;
+
 	sdev = sp->cmd->device;
 	if (sdev->queue_depth >= req->max_q_depth)
 		return;
@@ -858,8 +863,8 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 		qla2x00_ramp_up_queue_depth(vha, req, sp);
 		qla2x00_sp_compl(ha, sp);
 	} else {
-		DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
-		    vha->host_no));
+		DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion"
+			" handle(%d)\n", vha->host_no, req->id, index));
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid ISP SCSI completion handle\n");
 
@@ -881,7 +886,7 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 	uint16_t        handle_cnt;
 	uint16_t        cnt;
 
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 
 	if (!vha->flags.online)
 		return;
@@ -926,7 +931,7 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 			}
 			break;
 		case STATUS_CONT_TYPE:
-			qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
 			break;
 		default:
 			/* Type Not Supported. */
@@ -945,7 +950,8 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 }
 
 static inline void
-qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
+qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len,
+	struct rsp_que *rsp)
 {
 	struct scsi_cmnd *cp = sp->cmd;
 
@@ -962,7 +968,7 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
 	sp->request_sense_ptr += sense_len;
 	sp->request_sense_length -= sense_len;
 	if (sp->request_sense_length != 0)
-		sp->fcport->vha->status_srb = sp;
+		rsp->status_srb = sp;
 
 	DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
 	    "cmd=%p pid=%ld\n", __func__, sp->fcport->vha->host_no,
@@ -992,7 +998,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	uint32_t	sense_len, rsp_info_len, resid_len, fw_resid_len;
 	uint8_t		*rsp_info, *sense_data;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = rsp->req;
+	uint32_t handle;
+	uint16_t que;
+	struct req_que *req;
 
 	sts = (sts_entry_t *) pkt;
 	sts24 = (struct sts_entry_24xx *) pkt;
@@ -1003,18 +1011,20 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		comp_status = le16_to_cpu(sts->comp_status);
 		scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
 	}
-
+	handle = (uint32_t) LSW(sts->handle);
+	que = MSW(sts->handle);
+	req = ha->req_q_map[que];
 	/* Fast path completion. */
 	if (comp_status == CS_COMPLETE && scsi_status == 0) {
-		qla2x00_process_completed_request(vha, req, sts->handle);
+		qla2x00_process_completed_request(vha, req, handle);
 
 		return;
 	}
 
 	/* Validate handle. */
-	if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
-		sp = req->outstanding_cmds[sts->handle];
-		req->outstanding_cmds[sts->handle] = NULL;
+	if (handle < MAX_OUTSTANDING_COMMANDS) {
+		sp = req->outstanding_cmds[handle];
+		req->outstanding_cmds[handle] = NULL;
 	} else
 		sp = NULL;
 
@@ -1030,7 +1040,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	cp = sp->cmd;
 	if (cp == NULL) {
 		DEBUG2(printk("scsi(%ld): Command already returned back to OS "
-		    "pkt->handle=%d sp=%p.\n", vha->host_no, sts->handle, sp));
+		    "pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp));
 		qla_printk(KERN_WARNING, ha,
 		    "Command is NULL: already returned to OS (sp=%p)\n", sp);
 
@@ -1121,6 +1131,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 			    scsi_status));
 
 			/* Adjust queue depth for all luns on the port. */
+			if (!ql2xqfulltracking)
+				break;
 			fcport->last_queue_full = jiffies;
 			starget_for_each_device(cp->device->sdev_target,
 			    fcport, qla2x00_adjust_sdev_qdepth_down);
@@ -1133,7 +1145,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		if (!(scsi_status & SS_SENSE_LEN_VALID))
 			break;
 
-		qla2x00_handle_sense(sp, sense_data, sense_len);
+		qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
 		break;
 
 	case CS_DATA_UNDERRUN:
@@ -1179,6 +1191,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 				 * Adjust queue depth for all luns on the
 				 * port.
 				 */
+				if (!ql2xqfulltracking)
+					break;
 				fcport->last_queue_full = jiffies;
 				starget_for_each_device(
 				    cp->device->sdev_target, fcport,
@@ -1192,12 +1206,12 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 			if (!(scsi_status & SS_SENSE_LEN_VALID))
 				break;
 
-			qla2x00_handle_sense(sp, sense_data, sense_len);
+			qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
 		} else {
 			/*
 			 * If RISC reports underrun and target does not report
 			 * it then we must have a lost frame, so tell upper
-			 * layer to retry it by reporting a bus busy.
+			 * layer to retry it by reporting an error.
 			 */
 			if (!(scsi_status & SS_RESIDUAL_UNDER)) {
 				DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
@@ -1207,7 +1221,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 					cp->device->id, cp->device->lun, resid,
 					scsi_bufflen(cp)));
 
-				cp->result = DID_BUS_BUSY << 16;
+				cp->result = DID_ERROR << 16;
 				break;
 			}
 
@@ -1334,7 +1348,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	}
 
 	/* Place command on done queue. */
-	if (vha->status_srb == NULL)
+	if (rsp->status_srb == NULL)
 		qla2x00_sp_compl(ha, sp);
 }
 
@@ -1346,11 +1360,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
  * Extended sense data.
  */
 static void
-qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
+qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
 {
 	uint8_t		sense_sz = 0;
-	struct qla_hw_data *ha = vha->hw;
-	srb_t		*sp = vha->status_srb;
+	struct qla_hw_data *ha = rsp->hw;
+	srb_t		*sp = rsp->status_srb;
 	struct scsi_cmnd *cp;
 
 	if (sp != NULL && sp->request_sense_length != 0) {
@@ -1362,7 +1376,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
 			    "cmd is NULL: already returned to OS (sp=%p)\n",
 			    sp);
 
-			vha->status_srb = NULL;
+			rsp->status_srb = NULL;
 			return;
 		}
 
@@ -1383,7 +1397,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
 
 		/* Place command on done queue. */
 		if (sp->request_sense_length == 0) {
-			vha->status_srb = NULL;
+			rsp->status_srb = NULL;
 			qla2x00_sp_compl(ha, sp);
 		}
 	}
@@ -1399,7 +1413,9 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 {
 	srb_t *sp;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = rsp->req;
+	uint32_t handle = LSW(pkt->handle);
+	uint16_t que = MSW(pkt->handle);
+	struct req_que *req = ha->req_q_map[que];
 #if defined(QL_DEBUG_LEVEL_2)
 	if (pkt->entry_status & RF_INV_E_ORDER)
 		qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
@@ -1417,14 +1433,14 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 #endif
 
 	/* Validate handle. */
-	if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
-		sp = req->outstanding_cmds[pkt->handle];
+	if (handle < MAX_OUTSTANDING_COMMANDS)
+		sp = req->outstanding_cmds[handle];
 	else
 		sp = NULL;
 
 	if (sp) {
 		/* Free outstanding command slot. */
-		req->outstanding_cmds[pkt->handle] = NULL;
+		req->outstanding_cmds[handle] = NULL;
 
 		/* Bad payload or header */
 		if (pkt->entry_status &
@@ -1486,13 +1502,10 @@ qla24xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
  * qla24xx_process_response_queue() - Process response queue entries.
  * @ha: SCSI driver HA context
  */
-void
-qla24xx_process_response_queue(struct rsp_que *rsp)
+void qla24xx_process_response_queue(struct scsi_qla_host *vha,
+	struct rsp_que *rsp)
 {
 	struct sts_entry_24xx *pkt;
-	struct scsi_qla_host *vha;
-
-	vha = qla2x00_get_rsp_host(rsp);
 
 	if (!vha->flags.online)
 		return;
@@ -1523,7 +1536,7 @@ qla24xx_process_response_queue(struct rsp_que *rsp)
 			qla2x00_status_entry(vha, rsp, pkt);
 			break;
 		case STATUS_CONT_TYPE:
-			qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
 			break;
 		case VP_RPT_ID_IOCB_TYPE:
 			qla24xx_report_id_acquisition(vha,
@@ -1626,7 +1639,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1664,7 +1677,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 			break;
 		case 0x13:
 		case 0x14:
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 			break;
 		default:
 			DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1692,6 +1705,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_24xx __iomem *reg;
+	struct scsi_qla_host *vha;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1704,7 +1718,8 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
 
 	spin_lock_irq(&ha->hardware_lock);
 
-	qla24xx_process_response_queue(rsp);
+	vha = qla25xx_get_host(rsp);
+	qla24xx_process_response_queue(vha, rsp);
 	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 
 	spin_unlock_irq(&ha->hardware_lock);
@@ -1717,7 +1732,6 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
 {
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
-	struct device_reg_24xx __iomem *reg;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1726,13 +1740,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
 		return IRQ_NONE;
 	}
 	ha = rsp->hw;
-	reg = &ha->iobase->isp24;
 
-	spin_lock_irq(&ha->hardware_lock);
-
-	qla24xx_process_response_queue(rsp);
-
-	spin_unlock_irq(&ha->hardware_lock);
+	queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
 
 	return IRQ_HANDLED;
 }
@@ -1760,7 +1769,7 @@ qla24xx_msix_default(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock_irq(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1798,7 +1807,7 @@ qla24xx_msix_default(int irq, void *dev_id)
 			break;
 		case 0x13:
 		case 0x14:
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 			break;
 		default:
 			DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1822,31 +1831,14 @@ qla24xx_msix_default(int irq, void *dev_id)
 /* Interrupt handling helpers. */
 
 struct qla_init_msix_entry {
-	uint16_t entry;
-	uint16_t index;
 	const char *name;
 	irq_handler_t handler;
 };
 
-static struct qla_init_msix_entry base_queue = {
-	.entry = 0,
-	.index = 0,
-	.name = "qla2xxx (default)",
-	.handler = qla24xx_msix_default,
-};
-
-static struct qla_init_msix_entry base_rsp_queue = {
-	.entry = 1,
-	.index = 1,
-	.name = "qla2xxx (rsp_q)",
-	.handler = qla24xx_msix_rsp_q,
-};
-
-static struct qla_init_msix_entry multi_rsp_queue = {
-	.entry = 1,
-	.index = 1,
-	.name = "qla2xxx (multi_q)",
-	.handler = qla25xx_msix_rsp_q,
+static struct qla_init_msix_entry msix_entries[3] = {
+	{ "qla2xxx (default)", qla24xx_msix_default },
+	{ "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
+	{ "qla2xxx (multiq)", qla25xx_msix_rsp_q },
 };
 
 static void
@@ -1873,7 +1865,6 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 	int i, ret;
 	struct msix_entry *entries;
 	struct qla_msix_entry *qentry;
-	struct qla_init_msix_entry *msix_queue;
 
 	entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count,
 					GFP_KERNEL);
@@ -1900,7 +1891,7 @@ msix_failed:
 				ha->msix_count, ret);
 			goto msix_out;
 		}
-		ha->max_queues = ha->msix_count - 1;
+		ha->max_rsp_queues = ha->msix_count - 1;
 	}
 	ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
 				ha->msix_count, GFP_KERNEL);
@@ -1918,45 +1909,27 @@ msix_failed:
 		qentry->rsp = NULL;
 	}
 
-	/* Enable MSI-X for AENs for queue 0 */
-	qentry = &ha->msix_entries[0];
-	ret = request_irq(qentry->vector, base_queue.handler, 0,
-					base_queue.name, rsp);
-	if (ret) {
-		qla_printk(KERN_WARNING, ha,
+	/* Enable MSI-X vectors for the base queue */
+	for (i = 0; i < 2; i++) {
+		qentry = &ha->msix_entries[i];
+		ret = request_irq(qentry->vector, msix_entries[i].handler,
+					0, msix_entries[i].name, rsp);
+		if (ret) {
+			qla_printk(KERN_WARNING, ha,
 			"MSI-X: Unable to register handler -- %x/%d.\n",
 			qentry->vector, ret);
-		qla24xx_disable_msix(ha);
-		goto msix_out;
+			qla24xx_disable_msix(ha);
+			ha->mqenable = 0;
+			goto msix_out;
+		}
+		qentry->have_irq = 1;
+		qentry->rsp = rsp;
+		rsp->msix = qentry;
 	}
-	qentry->have_irq = 1;
-	qentry->rsp = rsp;
 
 	/* Enable MSI-X vector for response queue update for queue 0 */
-	if (ha->max_queues > 1 && ha->mqiobase) {
+	if (ha->mqiobase &&  (ha->max_rsp_queues > 1 || ha->max_req_queues > 1))
 		ha->mqenable = 1;
-		msix_queue = &multi_rsp_queue;
-		qla_printk(KERN_INFO, ha,
-				"MQ enabled, Number of Queue Resources: %d \n",
-				ha->max_queues);
-	} else {
-		ha->mqenable = 0;
-		msix_queue = &base_rsp_queue;
-	}
-
-	qentry = &ha->msix_entries[1];
-	ret = request_irq(qentry->vector, msix_queue->handler, 0,
-						msix_queue->name, rsp);
-	if (ret) {
-		qla_printk(KERN_WARNING, ha,
-			"MSI-X: Unable to register handler -- %x/%d.\n",
-			qentry->vector, ret);
-		qla24xx_disable_msix(ha);
-		ha->mqenable = 0;
-		goto msix_out;
-	}
-	qentry->have_irq = 1;
-	qentry->rsp = rsp;
 
 msix_out:
 	kfree(entries);
@@ -2063,35 +2036,11 @@ qla2x00_free_irqs(scsi_qla_host_t *vha)
 	}
 }
 
-static struct scsi_qla_host *
-qla2x00_get_rsp_host(struct rsp_que *rsp)
-{
-	srb_t *sp;
-	struct qla_hw_data *ha = rsp->hw;
-	struct scsi_qla_host *vha = NULL;
-	struct sts_entry_24xx *pkt;
-	struct req_que *req;
-
-	if (rsp->id) {
-		pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
-		req = rsp->req;
-		if (pkt && pkt->handle < MAX_OUTSTANDING_COMMANDS) {
-			sp = req->outstanding_cmds[pkt->handle];
-			if (sp)
-				vha = sp->fcport->vha;
-		}
-	}
-	if (!vha)
-	/* handle it in base queue */
-		vha = pci_get_drvdata(ha->pdev);
-
-	return vha;
-}
 
 int qla25xx_request_irq(struct rsp_que *rsp)
 {
 	struct qla_hw_data *ha = rsp->hw;
-	struct qla_init_msix_entry *intr = &multi_rsp_queue;
+	struct qla_init_msix_entry *intr = &msix_entries[2];
 	struct qla_msix_entry *msix = rsp->msix;
 	int ret;
 
@@ -2106,3 +2055,30 @@ int qla25xx_request_irq(struct rsp_que *rsp)
 	msix->rsp = rsp;
 	return ret;
 }
+
+struct scsi_qla_host *
+qla25xx_get_host(struct rsp_que *rsp)
+{
+	srb_t *sp;
+	struct qla_hw_data *ha = rsp->hw;
+	struct scsi_qla_host *vha = NULL;
+	struct sts_entry_24xx *pkt;
+	struct req_que *req;
+	uint16_t que;
+	uint32_t handle;
+
+	pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
+	que = MSW(pkt->handle);
+	handle = (uint32_t) LSW(pkt->handle);
+	req = ha->req_q_map[que];
+	if (handle < MAX_OUTSTANDING_COMMANDS) {
+		sp = req->outstanding_cmds[handle];
+		if (sp)
+			return  sp->fcport->vha;
+		else
+			goto base_que;
+	}
+base_que:
+	vha = pci_get_drvdata(ha->pdev);
+	return vha;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e67c1660bf4..451ece0760b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -408,7 +408,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
  * Context:
  *	Kernel context.
  */
-void
+int
 qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
     uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi,
     uint32_t *mpi_caps, uint8_t *phy)
@@ -427,6 +427,8 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
 	mcp->flags = 0;
 	mcp->tov = MBX_TOV_SECONDS;
 	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS)
+		goto failed;
 
 	/* Return mailbox data. */
 	*major = mcp->mb[1];
@@ -446,7 +448,7 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
 		phy[1] = mcp->mb[9] >> 8;
 		phy[2] = mcp->mb[9] & 0xff;
 	}
-
+failed:
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
@@ -455,6 +457,7 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
 		/*EMPTY*/
 		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
+	return rval;
 }
 
 /*
@@ -748,20 +751,20 @@ qla2x00_issue_iocb(scsi_qla_host_t *vha, void *buffer, dma_addr_t phys_addr,
  *	Kernel context.
  */
 int
-qla2x00_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla2x00_abort_command(srb_t *sp)
 {
 	unsigned long   flags = 0;
-	fc_port_t	*fcport;
 	int		rval;
 	uint32_t	handle = 0;
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
+	fc_port_t	*fcport = sp->fcport;
+	scsi_qla_host_t *vha = fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = vha->req;
 
 	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha->host_no));
 
-	fcport = sp->fcport;
-
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
@@ -800,7 +803,7 @@ qla2x00_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
 }
 
 int
-qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
+qla2x00_abort_target(struct fc_port *fcport, unsigned int l, int tag)
 {
 	int rval, rval2;
 	mbx_cmd_t  mc;
@@ -813,8 +816,8 @@ qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
 
 	l = l;
 	vha = fcport->vha;
-	req = vha->hw->req_q_map[0];
-	rsp = vha->hw->rsp_q_map[0];
+	req = vha->hw->req_q_map[tag];
+	rsp = vha->hw->rsp_q_map[tag];
 	mcp->mb[0] = MBC_ABORT_TARGET;
 	mcp->out_mb = MBX_9|MBX_2|MBX_1|MBX_0;
 	if (HAS_EXTENDED_IDS(vha->hw)) {
@@ -850,7 +853,7 @@ qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
 }
 
 int
-qla2x00_lun_reset(struct fc_port *fcport, unsigned int l)
+qla2x00_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
 {
 	int rval, rval2;
 	mbx_cmd_t  mc;
@@ -862,8 +865,8 @@ qla2x00_lun_reset(struct fc_port *fcport, unsigned int l)
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no));
 
 	vha = fcport->vha;
-	req = vha->hw->req_q_map[0];
-	rsp = vha->hw->rsp_q_map[0];
+	req = vha->hw->req_q_map[tag];
+	rsp = vha->hw->rsp_q_map[tag];
 	mcp->mb[0] = MBC_LUN_RESET;
 	mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
 	if (HAS_EXTENDED_IDS(vha->hw))
@@ -931,6 +934,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa,
 	mcp->mb[9] = vha->vp_idx;
 	mcp->out_mb = MBX_9|MBX_0;
 	mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	if (IS_QLA81XX(vha->hw))
+		mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -952,9 +957,19 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa,
 		DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
 		    vha->host_no, rval));
 	} else {
-		/*EMPTY*/
 		DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
 		    vha->host_no));
+
+		if (IS_QLA81XX(vha->hw)) {
+			vha->fcoe_vlan_id = mcp->mb[9] & 0xfff;
+			vha->fcoe_fcf_idx = mcp->mb[10];
+			vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8;
+			vha->fcoe_vn_port_mac[4] = mcp->mb[11] & 0xff;
+			vha->fcoe_vn_port_mac[3] = mcp->mb[12] >> 8;
+			vha->fcoe_vn_port_mac[2] = mcp->mb[12] & 0xff;
+			vha->fcoe_vn_port_mac[1] = mcp->mb[13] >> 8;
+			vha->fcoe_vn_port_mac[0] = mcp->mb[13] & 0xff;
+		}
 	}
 
 	return rval;
@@ -1252,7 +1267,7 @@ qla2x00_get_firmware_state(scsi_qla_host_t *vha, uint16_t *states)
 
 	mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
 	mcp->out_mb = MBX_0;
-	mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -1261,6 +1276,8 @@ qla2x00_get_firmware_state(scsi_qla_host_t *vha, uint16_t *states)
 	states[0] = mcp->mb[1];
 	states[1] = mcp->mb[2];
 	states[2] = mcp->mb[3];
+	states[3] = mcp->mb[4];
+	states[4] = mcp->mb[5];
 
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
@@ -1480,9 +1497,17 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	dma_addr_t	lg_dma;
 	uint32_t	iop[2];
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (ql2xmultique_tag)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
+
 	lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
 	if (lg == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
@@ -1493,6 +1518,7 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
+	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI);
 	if (opt & BIT_0)
@@ -1741,6 +1767,8 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	struct logio_entry_24xx *lg;
 	dma_addr_t	lg_dma;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
@@ -1752,8 +1780,14 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	}
 	memset(lg, 0, sizeof(struct logio_entry_24xx));
 
+	if (ql2xmaxqueues > 1)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
+	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags =
 	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
@@ -1864,9 +1898,6 @@ qla2x00_full_login_lip(scsi_qla_host_t *vha)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (IS_QLA81XX(vha->hw))
-	    return QLA_SUCCESS;
-
 	DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
 	    vha->host_no));
 
@@ -2195,21 +2226,21 @@ qla24xx_get_isp_stats(scsi_qla_host_t *vha, struct link_statistics *stats,
 }
 
 int
-qla24xx_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla24xx_abort_command(srb_t *sp)
 {
 	int		rval;
-	fc_port_t	*fcport;
 	unsigned long   flags = 0;
 
 	struct abort_entry_24xx *abt;
 	dma_addr_t	abt_dma;
 	uint32_t	handle;
+	fc_port_t	*fcport = sp->fcport;
+	struct scsi_qla_host *vha = fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = vha->req;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
-	fcport = sp->fcport;
-
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
@@ -2231,6 +2262,7 @@ qla24xx_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
 
 	abt->entry_type = ABORT_IOCB_TYPE;
 	abt->entry_count = 1;
+	abt->handle = MAKE_HANDLE(req->id, abt->handle);
 	abt->nport_handle = cpu_to_le16(fcport->loop_id);
 	abt->handle_to_abort = handle;
 	abt->port_id[0] = fcport->d_id.b.al_pa;
@@ -2272,7 +2304,7 @@ struct tsk_mgmt_cmd {
 
 static int
 __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
-    unsigned int l)
+    unsigned int l, int tag)
 {
 	int		rval, rval2;
 	struct tsk_mgmt_cmd *tsk;
@@ -2286,8 +2318,11 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	vha = fcport->vha;
 	ha = vha->hw;
-	req = ha->req_q_map[0];
-	rsp = ha->rsp_q_map[0];
+	req = vha->req;
+	if (ql2xmultique_tag)
+		rsp = ha->rsp_q_map[tag + 1];
+	else
+		rsp = req->rsp;
 	tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
 	if (tsk == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
@@ -2298,6 +2333,7 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
 	tsk->p.tsk.entry_count = 1;
+	tsk->p.tsk.handle = MAKE_HANDLE(req->id, tsk->p.tsk.handle);
 	tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
 	tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
 	tsk->p.tsk.control_flags = cpu_to_le32(type);
@@ -2344,15 +2380,15 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 }
 
 int
-qla24xx_abort_target(struct fc_port *fcport, unsigned int l)
+qla24xx_abort_target(struct fc_port *fcport, unsigned int l, int tag)
 {
-	return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l);
+	return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l, tag);
 }
 
 int
-qla24xx_lun_reset(struct fc_port *fcport, unsigned int l)
+qla24xx_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
 {
-	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
+	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l, tag);
 }
 
 int
@@ -2446,6 +2482,8 @@ qla2x00_stop_firmware(scsi_qla_host_t *vha)
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
 		    vha->host_no, rval));
+		if (mcp->mb[0] == MBS_INVALID_COMMAND)
+			rval = QLA_INVALID_COMMAND;
 	} else {
 		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
@@ -2717,8 +2755,11 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 		if (vp_idx == 0)
 			return;
 
-		if (MSB(stat) == 1)
+		if (MSB(stat) == 1) {
+			DEBUG2(printk("scsi(%ld): Could not acquire ID for "
+			    "VP[%d].\n", vha->host_no, vp_idx));
 			return;
+		}
 
 		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
 			if (vp_idx == vp->vp_idx)
@@ -3141,6 +3182,8 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
 		WRT_REG_DWORD(&reg->req_q_in, 0);
 		WRT_REG_DWORD(&reg->req_q_out, 0);
 	}
+	req->req_q_in = &reg->req_q_in;
+	req->req_q_out = &reg->req_q_out;
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -3167,7 +3210,6 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 	mcp->mb[6] = MSW(MSD(rsp->dma));
 	mcp->mb[7] = LSW(MSD(rsp->dma));
 	mcp->mb[5] = rsp->length;
-	mcp->mb[11] = rsp->vp_idx;
 	mcp->mb[14] = rsp->msix->entry;
 	mcp->mb[13] = rsp->rid;
 
@@ -3179,7 +3221,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 	mcp->mb[8] = 0;
 	/* que out ptr index */
 	mcp->mb[9] = 0;
-	mcp->out_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|MBX_7
+	mcp->out_mb = MBX_14|MBX_13|MBX_9|MBX_8|MBX_7
 			|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
 	mcp->flags = MBX_DMA_OUT;
@@ -3384,7 +3426,7 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
 		    vha->host_no, rval, mcp->mb[0]));
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
 
 	return rval;
@@ -3428,3 +3470,141 @@ qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 
 	return rval;
 }
+
+int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma,
+    uint16_t size_in_bytes, uint16_t *actual_size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_GET_XGMAC_STATS;
+	mcp->mb[2] = MSW(stats_dma);
+	mcp->mb[3] = LSW(stats_dma);
+	mcp->mb[6] = MSW(MSD(stats_dma));
+	mcp->mb[7] = LSW(MSD(stats_dma));
+	mcp->mb[8] = size_in_bytes >> 2;
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+		    "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+
+		*actual_size = mcp->mb[2] << 2;
+	}
+
+	return rval;
+}
+
+int
+qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma,
+    uint16_t size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_GET_DCBX_PARAMS;
+	mcp->mb[1] = 0;
+	mcp->mb[2] = MSW(tlv_dma);
+	mcp->mb[3] = LSW(tlv_dma);
+	mcp->mb[6] = MSW(MSD(tlv_dma));
+	mcp->mb[7] = LSW(MSD(tlv_dma));
+	mcp->mb[8] = size;
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+		    "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
+
+int
+qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_READ_RAM_EXTENDED;
+	mcp->mb[1] = LSW(risc_addr);
+	mcp->mb[8] = MSW(risc_addr);
+	mcp->out_mb = MBX_8|MBX_1|MBX_0;
+	mcp->in_mb = MBX_3|MBX_2|MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+		*data = mcp->mb[3] << 16 | mcp->mb[2];
+	}
+
+	return rval;
+}
+
+int
+qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+                return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_WRITE_RAM_WORD_EXTENDED;
+	mcp->mb[1] = LSW(risc_addr);
+	mcp->mb[2] = LSW(data);
+	mcp->mb[3] = MSW(data);
+	mcp->mb[8] = MSW(risc_addr);
+	mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 51716c7e300..650bcef08f2 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -398,9 +398,8 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 
 	qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
 
-	memset(vha->req_ques, 0, sizeof(vha->req_ques));
-	vha->req_ques[0] = ha->req_q_map[0]->id;
-	host->can_queue = ha->req_q_map[0]->length + 128;
+	vha->req = base_vha->req;
+	host->can_queue = base_vha->req->length + 128;
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
 	host->max_cmd_len = MAX_CMDSZ;
@@ -515,76 +514,53 @@ int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos)
 
 /* Delete all queues for a given vhost */
 int
-qla25xx_delete_queues(struct scsi_qla_host *vha, uint8_t que_no)
+qla25xx_delete_queues(struct scsi_qla_host *vha)
 {
 	int cnt, ret = 0;
 	struct req_que *req = NULL;
 	struct rsp_que *rsp = NULL;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (que_no) {
-	/* Delete request queue */
-		req = ha->req_q_map[que_no];
+	/* Delete request queues */
+	for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
+		req = ha->req_q_map[cnt];
 		if (req) {
-			rsp = req->rsp;
 			ret = qla25xx_delete_req_que(vha, req);
 			if (ret != QLA_SUCCESS) {
 				qla_printk(KERN_WARNING, ha,
-				"Couldn't delete req que %d\n", req->id);
+				"Couldn't delete req que %d\n",
+				req->id);
 				return ret;
 			}
-			/* Delete associated response queue */
-			if (rsp) {
-				ret = qla25xx_delete_rsp_que(vha, rsp);
-				if (ret != QLA_SUCCESS) {
-					qla_printk(KERN_WARNING, ha,
-						"Couldn't delete rsp que %d\n",
-						rsp->id);
-					return ret;
-				}
-			}
 		}
-	} else {  /* delete all queues of this host */
-		for (cnt = 0; cnt < QLA_MAX_HOST_QUES; cnt++) {
-			/* Delete request queues */
-			req = ha->req_q_map[vha->req_ques[cnt]];
-			if (req && req->id) {
-				rsp = req->rsp;
-				ret = qla25xx_delete_req_que(vha, req);
-				if (ret != QLA_SUCCESS) {
-					qla_printk(KERN_WARNING, ha,
-						"Couldn't delete req que %d\n",
-						vha->req_ques[cnt]);
-					return ret;
-				}
-				vha->req_ques[cnt] = ha->req_q_map[0]->id;
-			/* Delete associated response queue */
-				if (rsp && rsp->id) {
-					ret = qla25xx_delete_rsp_que(vha, rsp);
-					if (ret != QLA_SUCCESS) {
-						qla_printk(KERN_WARNING, ha,
-						"Couldn't delete rsp que %d\n",
-						rsp->id);
-						return ret;
-					}
-				}
+	}
+
+	/* Delete response queues */
+	for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
+		rsp = ha->rsp_q_map[cnt];
+		if (rsp) {
+			ret = qla25xx_delete_rsp_que(vha, rsp);
+			if (ret != QLA_SUCCESS) {
+				qla_printk(KERN_WARNING, ha,
+				"Couldn't delete rsp que %d\n",
+				rsp->id);
+				return ret;
 			}
 		}
 	}
-	qla_printk(KERN_INFO, ha, "Queues deleted for vport:%d\n",
-		vha->vp_idx);
 	return ret;
 }
 
 int
 qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
-	uint8_t vp_idx, uint16_t rid, uint8_t rsp_que, uint8_t qos)
+	uint8_t vp_idx, uint16_t rid, int rsp_que, uint8_t qos)
 {
 	int ret = 0;
 	struct req_que *req = NULL;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 	uint16_t que_id = 0;
 	device_reg_t __iomem *reg;
+	uint32_t cnt;
 
 	req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
 	if (req == NULL) {
@@ -604,8 +580,8 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	}
 
 	mutex_lock(&ha->vport_lock);
-	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
-	if (que_id >= ha->max_queues) {
+	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues);
+	if (que_id >= ha->max_req_queues) {
 		mutex_unlock(&ha->vport_lock);
 		qla_printk(KERN_INFO, ha, "No resources to create "
 			 "additional request queue\n");
@@ -617,10 +593,10 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	req->vp_idx = vp_idx;
 	req->qos = qos;
 
-	if (ha->rsp_q_map[rsp_que]) {
+	if (rsp_que < 0)
+		req->rsp = NULL;
+	else
 		req->rsp = ha->rsp_q_map[rsp_que];
-		req->rsp->req = req;
-	}
 	/* Use alternate PCI bus number */
 	if (MSB(req->rid))
 		options |= BIT_4;
@@ -628,13 +604,16 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	if (LSB(req->rid))
 		options |= BIT_5;
 	req->options = options;
+
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		req->outstanding_cmds[cnt] = NULL;
+	req->current_outstanding_cmd = 1;
+
 	req->ring_ptr = req->ring;
 	req->ring_index = 0;
 	req->cnt = req->length;
 	req->id = que_id;
 	reg = ISP_QUE_REG(ha, que_id);
-	req->req_q_in = &reg->isp25mq.req_q_in;
-	req->req_q_out = &reg->isp25mq.req_q_out;
 	req->max_q_depth = ha->req_q_map[0]->max_q_depth;
 	mutex_unlock(&ha->vport_lock);
 
@@ -654,10 +633,19 @@ que_failed:
 	return 0;
 }
 
+static void qla_do_work(struct work_struct *work)
+{
+	struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
+	struct scsi_qla_host *vha;
+
+	vha = qla25xx_get_host(rsp);
+	qla24xx_process_response_queue(vha, rsp);
+}
+
 /* create response queue */
 int
 qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
-	uint8_t vp_idx, uint16_t rid)
+	uint8_t vp_idx, uint16_t rid, int req)
 {
 	int ret = 0;
 	struct rsp_que *rsp = NULL;
@@ -672,7 +660,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 		goto que_failed;
 	}
 
-	rsp->length = RESPONSE_ENTRY_CNT_2300;
+	rsp->length = RESPONSE_ENTRY_CNT_MQ;
 	rsp->ring = dma_alloc_coherent(&ha->pdev->dev,
 			(rsp->length + 1) * sizeof(response_t),
 			&rsp->dma, GFP_KERNEL);
@@ -683,8 +671,8 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	}
 
 	mutex_lock(&ha->vport_lock);
-	que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
-	if (que_id >= ha->max_queues) {
+	que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_rsp_queues);
+	if (que_id >= ha->max_rsp_queues) {
 		mutex_unlock(&ha->vport_lock);
 		qla_printk(KERN_INFO, ha, "No resources to create "
 			 "additional response queue\n");
@@ -708,8 +696,6 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	if (LSB(rsp->rid))
 		options |= BIT_5;
 	rsp->options = options;
-	rsp->ring_ptr = rsp->ring;
-	rsp->ring_index = 0;
 	rsp->id = que_id;
 	reg = ISP_QUE_REG(ha, que_id);
 	rsp->rsp_q_in = &reg->isp25mq.rsp_q_in;
@@ -728,9 +714,14 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 		mutex_unlock(&ha->vport_lock);
 		goto que_failed;
 	}
+	if (req >= 0)
+		rsp->req = ha->req_q_map[req];
+	else
+		rsp->req = NULL;
 
 	qla2x00_init_response_q_entries(rsp);
-
+	if (rsp->hw->wq)
+		INIT_WORK(&rsp->q_work, qla_do_work);
 	return rsp->id;
 
 que_failed:
@@ -744,14 +735,16 @@ qla25xx_create_queues(struct scsi_qla_host *vha, uint8_t qos)
 	uint16_t options = 0;
 	uint8_t ret = 0;
 	struct qla_hw_data *ha = vha->hw;
+	struct rsp_que *rsp;
 
 	options |= BIT_1;
-	ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0);
+	ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0, -1);
 	if (!ret) {
 		qla_printk(KERN_WARNING, ha, "Response Que create failed\n");
 		return ret;
 	} else
 		qla_printk(KERN_INFO, ha, "Response Que:%d created.\n", ret);
+	rsp = ha->rsp_q_map[ret];
 
 	options = 0;
 	if (qos & BIT_7)
@@ -759,10 +752,11 @@ qla25xx_create_queues(struct scsi_qla_host *vha, uint8_t qos)
 	ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, ret,
 					qos & ~BIT_7);
 	if (ret) {
-		vha->req_ques[0] = ret;
+		vha->req = ha->req_q_map[ret];
 		qla_printk(KERN_INFO, ha, "Request Que:%d created.\n", ret);
 	} else
 		qla_printk(KERN_WARNING, ha, "Request Que create failed\n");
+	rsp->req = ha->req_q_map[ret];
 
 	return ret;
 }
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e4fdcdad80d..dcf011679c8 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -77,6 +77,14 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to report for target devices.");
 
+int ql2xqfulltracking = 1;
+module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xqfulltracking,
+		"Controls whether the driver tracks queue full status "
+		"returns and dynamically adjusts a scsi device's queue "
+		"depth.  Default is 1, perform tracking.  Set to 0 to "
+		"disable dynamic tracking and adjustment of queue depth.");
+
 int ql2xqfullrampup = 120;
 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xqfullrampup,
@@ -96,6 +104,23 @@ MODULE_PARM_DESC(ql2xmaxqueues,
 		"Enables MQ settings "
 		"Default is 1 for single queue. Set it to number \
 			of queues in MQ mode.");
+
+int ql2xmultique_tag;
+module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xmultique_tag,
+		"Enables CPU affinity settings for the driver "
+		"Default is 0 for no affinity of request and response IO. "
+		"Set it to 1 to turn on the cpu affinity.");
+
+int ql2xfwloadbin;
+module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfwloadbin,
+		"Option to specify location from which to load ISP firmware:\n"
+		" 2 -- load firmware via the request_firmware() (hotplug)\n"
+		"      interface.\n"
+		" 1 -- load firmware from flash.\n"
+		" 0 -- use default semantics.\n");
+
 /*
  * SCSI host template entry points
  */
@@ -187,7 +212,7 @@ static void qla2x00_sp_free_dma(srb_t *);
 /* -------------------------------------------------------------------------- */
 static int qla2x00_alloc_queues(struct qla_hw_data *ha)
 {
-	ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_queues,
+	ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
 				GFP_KERNEL);
 	if (!ha->req_q_map) {
 		qla_printk(KERN_WARNING, ha,
@@ -195,7 +220,7 @@ static int qla2x00_alloc_queues(struct qla_hw_data *ha)
 		goto fail_req_map;
 	}
 
-	ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_queues,
+	ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
 				GFP_KERNEL);
 	if (!ha->rsp_q_map) {
 		qla_printk(KERN_WARNING, ha,
@@ -213,16 +238,8 @@ fail_req_map:
 	return -ENOMEM;
 }
 
-static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
-	struct rsp_que *rsp)
+static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
 {
-	if (rsp && rsp->ring)
-		dma_free_coherent(&ha->pdev->dev,
-		(rsp->length + 1) * sizeof(response_t),
-		rsp->ring, rsp->dma);
-
-	kfree(rsp);
-	rsp = NULL;
 	if (req && req->ring)
 		dma_free_coherent(&ha->pdev->dev,
 		(req->length + 1) * sizeof(request_t),
@@ -232,22 +249,77 @@ static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
 	req = NULL;
 }
 
+static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
+{
+	if (rsp && rsp->ring)
+		dma_free_coherent(&ha->pdev->dev,
+		(rsp->length + 1) * sizeof(response_t),
+		rsp->ring, rsp->dma);
+
+	kfree(rsp);
+	rsp = NULL;
+}
+
 static void qla2x00_free_queues(struct qla_hw_data *ha)
 {
 	struct req_que *req;
 	struct rsp_que *rsp;
 	int cnt;
 
-	for (cnt = 0; cnt < ha->max_queues; cnt++) {
-		rsp = ha->rsp_q_map[cnt];
+	for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
 		req = ha->req_q_map[cnt];
-		qla2x00_free_que(ha, req, rsp);
+		qla2x00_free_req_que(ha, req);
+	}
+	kfree(ha->req_q_map);
+	ha->req_q_map = NULL;
+
+	for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+		rsp = ha->rsp_q_map[cnt];
+		qla2x00_free_rsp_que(ha, rsp);
 	}
 	kfree(ha->rsp_q_map);
 	ha->rsp_q_map = NULL;
+}
 
-	kfree(ha->req_q_map);
-	ha->req_q_map = NULL;
+static int qla25xx_setup_mode(struct scsi_qla_host *vha)
+{
+	uint16_t options = 0;
+	int ques, req, ret;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ql2xmultique_tag) {
+		/* CPU affinity mode */
+		ha->wq = create_workqueue("qla2xxx_wq");
+		/* create a request queue for IO */
+		options |= BIT_7;
+		req = qla25xx_create_req_que(ha, options, 0, 0, -1,
+			QLA_DEFAULT_QUE_QOS);
+		if (!req) {
+			qla_printk(KERN_WARNING, ha,
+				"Can't create request queue\n");
+			goto fail;
+		}
+		vha->req = ha->req_q_map[req];
+		options |= BIT_1;
+		for (ques = 1; ques < ha->max_rsp_queues; ques++) {
+			ret = qla25xx_create_rsp_que(ha, options, 0, 0, req);
+			if (!ret) {
+				qla_printk(KERN_WARNING, ha,
+					"Response Queue create failed\n");
+				goto fail2;
+			}
+		}
+		DEBUG2(qla_printk(KERN_INFO, ha,
+			"CPU affinity mode enabled, no. of response"
+			" queues:%d, no. of request queues:%d\n",
+			ha->max_rsp_queues, ha->max_req_queues));
+	}
+	return 0;
+fail2:
+	qla25xx_delete_queues(vha);
+fail:
+	ha->mqenable = 0;
+	return 1;
 }
 
 static char *
@@ -387,7 +459,6 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 
 	sp->fcport = fcport;
 	sp->cmd = cmd;
-	sp->que = ha->req_q_map[0];
 	sp->flags = 0;
 	CMD_SP(cmd) = (void *)sp;
 	cmd->scsi_done = done;
@@ -612,7 +683,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
 void
 qla2x00_abort_fcport_cmds(fc_port_t *fcport)
 {
-	int cnt, que, id;
+	int cnt;
 	unsigned long flags;
 	srb_t *sp;
 	scsi_qla_host_t *vha = fcport->vha;
@@ -620,32 +691,27 @@ qla2x00_abort_fcport_cmds(fc_port_t *fcport)
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
-		id = vha->req_ques[que];
-		req = ha->req_q_map[id];
-		if (!req)
+	req = vha->req;
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = req->outstanding_cmds[cnt];
+		if (!sp)
+			continue;
+		if (sp->fcport != fcport)
 			continue;
-		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-			sp = req->outstanding_cmds[cnt];
-			if (!sp)
-				continue;
-			if (sp->fcport != fcport)
-				continue;
 
-			spin_unlock_irqrestore(&ha->hardware_lock, flags);
-			if (ha->isp_ops->abort_command(vha, sp, req)) {
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		if (ha->isp_ops->abort_command(sp)) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			"Abort failed --  %lx\n",
+			sp->cmd->serial_number));
+		} else {
+			if (qla2x00_eh_wait_on_command(sp->cmd) !=
+				QLA_SUCCESS)
 				DEBUG2(qla_printk(KERN_WARNING, ha,
-				"Abort failed --  %lx\n",
+				"Abort failed while waiting --  %lx\n",
 				sp->cmd->serial_number));
-			} else {
-				if (qla2x00_eh_wait_on_command(sp->cmd) !=
-					QLA_SUCCESS)
-					DEBUG2(qla_printk(KERN_WARNING, ha,
-					"Abort failed while waiting --  %lx\n",
-					sp->cmd->serial_number));
-			}
-			spin_lock_irqsave(&ha->hardware_lock, flags);
 		}
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
@@ -693,7 +759,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	unsigned long flags;
 	int wait = 0;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req;
+	struct req_que *req = vha->req;
 	srb_t *spt;
 
 	qla2x00_block_error_handler(cmd);
@@ -709,7 +775,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	spt = (srb_t *) CMD_SP(cmd);
 	if (!spt)
 		return SUCCESS;
-	req = spt->que;
 
 	/* Check active list for command command. */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -726,7 +791,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		" pid=%ld.\n", __func__, vha->host_no, sp, serial));
 
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
-		if (ha->isp_ops->abort_command(vha, sp, req)) {
+		if (ha->isp_ops->abort_command(sp)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			"mbx failed.\n", __func__, vha->host_no));
 			ret = FAILED;
@@ -777,7 +842,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
 		return status;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	req = sp->que;
+	req = vha->req;
 	for (cnt = 1; status == QLA_SUCCESS &&
 		cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 		sp = req->outstanding_cmds[cnt];
@@ -820,7 +885,7 @@ static char *reset_errors[] = {
 
 static int
 __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
-    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
+    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int, int))
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -841,7 +906,8 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 	if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
 		goto eh_reset_failed;
 	err = 2;
-	if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
+	if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
+		!= QLA_SUCCESS)
 		goto eh_reset_failed;
 	err = 3;
 	if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
@@ -996,6 +1062,9 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 		if (qla2x00_vp_abort_isp(vha))
 			goto eh_host_reset_lock;
 	} else {
+		if (ha->wq)
+			flush_workqueue(ha->wq);
+
 		set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 		if (qla2x00_abort_isp(base_vha)) {
 			clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
@@ -1037,7 +1106,8 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
 	struct fc_port *fcport;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (ha->flags.enable_lip_full_login && !vha->vp_idx) {
+	if (ha->flags.enable_lip_full_login && !vha->vp_idx &&
+	    !IS_QLA81XX(ha)) {
 		ret = qla2x00_full_login_lip(vha);
 		if (ret != QLA_SUCCESS) {
 			DEBUG2_3(printk("%s(%ld): failed: "
@@ -1064,7 +1134,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
 			if (fcport->port_type != FCT_TARGET)
 				continue;
 
-			ret = ha->isp_ops->target_reset(fcport, 0);
+			ret = ha->isp_ops->target_reset(fcport, 0, 0);
 			if (ret != QLA_SUCCESS) {
 				DEBUG2_3(printk("%s(%ld): bus_reset failed: "
 				    "target_reset=%d d_id=%x.\n", __func__,
@@ -1088,7 +1158,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
@@ -1123,7 +1193,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+	struct req_que *req = vha->req;
 
 	if (sdev->tagged_supported)
 		scsi_activate_tcq(sdev, req->max_q_depth);
@@ -1511,6 +1581,13 @@ qla2x00_set_isp_flags(struct qla_hw_data *ha)
 		ha->fw_srisc_address = RISC_START_ADDRESS_2400;
 		break;
 	}
+
+	/* Get adapter physical port no from interrupt pin register. */
+	pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
+	if (ha->port_no & 1)
+		ha->flags.port0 = 1;
+	else
+		ha->flags.port0 = 0;
 }
 
 static int
@@ -1518,6 +1595,7 @@ qla2x00_iospace_config(struct qla_hw_data *ha)
 {
 	resource_size_t pio;
 	uint16_t msix;
+	int cpus;
 
 	if (pci_request_selected_regions(ha->pdev, ha->bars,
 	    QLA2XXX_DRIVER_NAME)) {
@@ -1571,8 +1649,9 @@ skip_pio:
 	}
 
 	/* Determine queue resources */
-	ha->max_queues = 1;
-	if (ql2xmaxqueues <= 1 || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
+	ha->max_req_queues = ha->max_rsp_queues = 1;
+	if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+		(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
 	ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
 			pci_resource_len(ha->pdev, 3));
@@ -1582,18 +1661,24 @@ skip_pio:
 		ha->msix_count = msix;
 		/* Max queues are bounded by available msix vectors */
 		/* queue 0 uses two msix vectors */
-		if (ha->msix_count - 1 < ql2xmaxqueues)
-			ha->max_queues = ha->msix_count - 1;
-		else if (ql2xmaxqueues > QLA_MQ_SIZE)
-			ha->max_queues = QLA_MQ_SIZE;
-		else
-			ha->max_queues = ql2xmaxqueues;
+		if (ql2xmultique_tag) {
+			cpus = num_online_cpus();
+			ha->max_rsp_queues = (ha->msix_count - 1 - cpus) ?
+				(cpus + 1) : (ha->msix_count - 1);
+			ha->max_req_queues = 2;
+		} else if (ql2xmaxqueues > 1) {
+			ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ?
+						QLA_MQ_SIZE : ql2xmaxqueues;
+			DEBUG2(qla_printk(KERN_INFO, ha, "QoS mode set, max no"
+			" of request queues:%d\n", ha->max_req_queues));
+		}
 		qla_printk(KERN_INFO, ha,
 			"MSI-X vector count: %d\n", msix);
-	}
+	} else
+		qla_printk(KERN_INFO, ha, "BAR 3 not enabled\n");
 
 mqiobase_exit:
-	ha->msix_count = ha->max_queues + 1;
+	ha->msix_count = ha->max_rsp_queues + 1;
 	return (0);
 
 iospace_error_exit:
@@ -1605,6 +1690,9 @@ qla2xxx_scan_start(struct Scsi_Host *shost)
 {
 	scsi_qla_host_t *vha = shost_priv(shost);
 
+	if (vha->hw->flags.running_gold_fw)
+		return;
+
 	set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
 	set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
 	set_bit(RSCN_UPDATE, &vha->dpc_flags);
@@ -1768,6 +1856,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
 		ha->gid_list_info_size = 8;
 		ha->optrom_size = OPTROM_SIZE_81XX;
+		ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
 		ha->isp_ops = &qla81xx_isp_ops;
 		ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
 		ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
@@ -1803,14 +1892,15 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 		ret = -ENOMEM;
 		qla2x00_mem_free(ha);
-		qla2x00_free_que(ha, req, rsp);
+		qla2x00_free_req_que(ha, req);
+		qla2x00_free_rsp_que(ha, rsp);
 		goto probe_hw_failed;
 	}
 
 	pci_set_drvdata(pdev, base_vha);
 
 	host = base_vha->host;
-	base_vha->req_ques[0] = req->id;
+	base_vha->req = req;
 	host->can_queue = req->length + 128;
 	if (IS_QLA2XXX_MIDTYPE(ha))
 		base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
@@ -1841,7 +1931,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	ha->rsp_q_map[0] = rsp;
 	ha->req_q_map[0] = req;
-
+	rsp->req = req;
+	req->rsp = rsp;
+	set_bit(0, ha->req_qid_map);
+	set_bit(0, ha->rsp_qid_map);
 	/* FWI2-capable only. */
 	req->req_q_in = &ha->iobase->isp24.req_q_in;
 	req->req_q_out = &ha->iobase->isp24.req_q_out;
@@ -1866,6 +1959,15 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto probe_failed;
 	}
 
+	if (ha->mqenable)
+		if (qla25xx_setup_mode(base_vha))
+			qla_printk(KERN_WARNING, ha,
+				"Can't create queues, falling back to single"
+				" queue mode\n");
+
+	if (ha->flags.running_gold_fw)
+		goto skip_dpc;
+
 	/*
 	 * Startup the kernel thread for this host adapter
 	 */
@@ -1878,6 +1980,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto probe_failed;
 	}
 
+skip_dpc:
 	list_add_tail(&base_vha->list, &ha->vp_list);
 	base_vha->host->irq = ha->pdev->irq;
 
@@ -1917,8 +2020,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 probe_init_failed:
-	qla2x00_free_que(ha, req, rsp);
-	ha->max_queues = 0;
+	qla2x00_free_req_que(ha, req);
+	qla2x00_free_rsp_que(ha, rsp);
+	ha->max_req_queues = ha->max_rsp_queues = 0;
 
 probe_failed:
 	if (base_vha->timer_active)
@@ -1976,6 +2080,13 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	base_vha->flags.online = 0;
 
+	/* Flush the work queue and remove it */
+	if (ha->wq) {
+		flush_workqueue(ha->wq);
+		destroy_workqueue(ha->wq);
+		ha->wq = NULL;
+	}
+
 	/* Kill the kernel thread for this host */
 	if (ha->dpc_thread) {
 		struct task_struct *t = ha->dpc_thread;
@@ -2017,6 +2128,8 @@ qla2x00_free_device(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
 
+	qla25xx_delete_queues(vha);
+
 	if (ha->flags.fce_enabled)
 		qla2x00_disable_fce_trace(vha, NULL, NULL);
 
@@ -2329,6 +2442,14 @@ qla2x00_mem_free(struct qla_hw_data *ha)
 		vfree(ha->fw_dump);
 	}
 
+	if (ha->dcbx_tlv)
+		dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+		    ha->dcbx_tlv, ha->dcbx_tlv_dma);
+
+	if (ha->xgmac_data)
+		dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+		    ha->xgmac_data, ha->xgmac_data_dma);
+
 	if (ha->sns_cmd)
 		dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
 		ha->sns_cmd, ha->sns_cmd_dma);
@@ -2412,6 +2533,8 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
 	INIT_LIST_HEAD(&vha->work_list);
 	INIT_LIST_HEAD(&vha->list);
 
+	spin_lock_init(&vha->work_lock);
+
 	sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
 	return vha;
 
@@ -2420,13 +2543,11 @@ fail:
 }
 
 static struct qla_work_evt *
-qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
-    int locked)
+qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
 {
 	struct qla_work_evt *e;
 
-	e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
-	    GFP_KERNEL);
+	e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
 	if (!e)
 		return NULL;
 
@@ -2437,17 +2558,15 @@ qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
 }
 
 static int
-qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e, int locked)
+qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
 {
-	unsigned long uninitialized_var(flags);
-	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags;
 
-	if (!locked)
-		spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&vha->work_lock, flags);
 	list_add_tail(&e->list, &vha->work_list);
+	spin_unlock_irqrestore(&vha->work_lock, flags);
 	qla2xxx_wake_dpc(vha);
-	if (!locked)
-		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
 	return QLA_SUCCESS;
 }
 
@@ -2457,13 +2576,13 @@ qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code,
 {
 	struct qla_work_evt *e;
 
-	e = qla2x00_alloc_work(vha, QLA_EVT_AEN, 1);
+	e = qla2x00_alloc_work(vha, QLA_EVT_AEN);
 	if (!e)
 		return QLA_FUNCTION_FAILED;
 
 	e->u.aen.code = code;
 	e->u.aen.data = data;
-	return qla2x00_post_work(vha, e, 1);
+	return qla2x00_post_work(vha, e);
 }
 
 int
@@ -2471,25 +2590,27 @@ qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
 {
 	struct qla_work_evt *e;
 
-	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK);
 	if (!e)
 		return QLA_FUNCTION_FAILED;
 
 	memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
-	return qla2x00_post_work(vha, e, 1);
+	return qla2x00_post_work(vha, e);
 }
 
 static void
 qla2x00_do_work(struct scsi_qla_host *vha)
 {
-	struct qla_work_evt *e;
-	struct qla_hw_data *ha = vha->hw;
+	struct qla_work_evt *e, *tmp;
+	unsigned long flags;
+	LIST_HEAD(work);
 
-	spin_lock_irq(&ha->hardware_lock);
-	while (!list_empty(&vha->work_list)) {
-		e = list_entry(vha->work_list.next, struct qla_work_evt, list);
+	spin_lock_irqsave(&vha->work_lock, flags);
+	list_splice_init(&vha->work_list, &work);
+	spin_unlock_irqrestore(&vha->work_lock, flags);
+
+	list_for_each_entry_safe(e, tmp, &work, list) {
 		list_del_init(&e->list);
-		spin_unlock_irq(&ha->hardware_lock);
 
 		switch (e->type) {
 		case QLA_EVT_AEN:
@@ -2502,10 +2623,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
-		spin_lock_irq(&ha->hardware_lock);
 	}
-	spin_unlock_irq(&ha->hardware_lock);
 }
+
 /* Relogins all the fcports of a vport
  * Context: dpc thread
  */
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 152ecfc26cd..6260505dceb 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -219,8 +219,8 @@ qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, uint16_t data)
 	wait_cnt = NVR_WAIT_CNT;
 	do {
 		if (!--wait_cnt) {
-			DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
-			    __func__, vha->host_no));
+			DEBUG9_10(qla_printk(KERN_WARNING, ha,
+			    "NVRAM didn't go ready...\n"));
 			break;
 		}
 		NVRAM_DELAY();
@@ -349,7 +349,7 @@ qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
 		wait_cnt = NVR_WAIT_CNT;
 		do {
 			if (!--wait_cnt) {
-				DEBUG9_10(qla_printk(
+				DEBUG9_10(qla_printk(KERN_WARNING, ha,
 				    "NVRAM didn't go ready...\n"));
 				break;
 			}
@@ -408,7 +408,8 @@ qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
 	wait_cnt = NVR_WAIT_CNT;
 	do {
 		if (!--wait_cnt) {
-			DEBUG9_10(qla_printk("NVRAM didn't go ready...\n"));
+			DEBUG9_10(qla_printk(KERN_WARNING, ha,
+			    "NVRAM didn't go ready...\n"));
 			break;
 		}
 		NVRAM_DELAY();
@@ -701,32 +702,35 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 			break;
 		case FLT_REG_VPD_0:
 			ha->flt_region_vpd_nvram = start;
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_VPD_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_NVRAM_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_NVRAM_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_FDT:
 			ha->flt_region_fdt = start;
 			break;
 		case FLT_REG_NPIV_CONF_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
 		case FLT_REG_NPIV_CONF_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
+		case FLT_REG_GOLD_FW:
+			ha->flt_region_gold_fw = start;
+			break;
 		}
 	}
 	goto done;
@@ -744,12 +748,12 @@ no_flash_data:
 	ha->flt_region_fw = def_fw[def];
 	ha->flt_region_boot = def_boot[def];
 	ha->flt_region_vpd_nvram = def_vpd_nvram[def];
-	ha->flt_region_vpd = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_vpd = ha->flags.port0 ?
 	    def_vpd0[def]: def_vpd1[def];
-	ha->flt_region_nvram = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_nvram = ha->flags.port0 ?
 	    def_nvram0[def]: def_nvram1[def];
 	ha->flt_region_fdt = def_fdt[def];
-	ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_npiv_conf = ha->flags.port0 ?
 	    def_npiv_conf0[def]: def_npiv_conf1[def];
 done:
 	DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
@@ -924,6 +928,8 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 		struct fc_vport_identifiers vid;
 		struct fc_vport *vport;
 
+		memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
+
 		flags = le16_to_cpu(entry->flags);
 		if (flags == 0xffff)
 			continue;
@@ -937,9 +943,7 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 		vid.port_name = wwn_to_u64(entry->port_name);
 		vid.node_name = wwn_to_u64(entry->node_name);
 
-		memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
-
-		DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx "
+		DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
 			"wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
 			vid.port_name, vid.node_name, le16_to_cpu(entry->vf_id),
 			entry->q_qos, entry->f_qos));
@@ -955,7 +959,6 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 	}
 done:
 	kfree(data);
-	ha->npiv_info = NULL;
 }
 
 static int
@@ -1079,8 +1082,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 				    0xff0000) | ((fdata >> 16) & 0xff));
 			ret = qla24xx_erase_sector(vha, fdata);
 			if (ret != QLA_SUCCESS) {
-				DEBUG9(qla_printk("Unable to erase sector: "
-				    "address=%x.\n", faddr));
+				DEBUG9(qla_printk(KERN_WARNING, ha,
+				    "Unable to erase sector: address=%x.\n",
+				    faddr));
 				break;
 			}
 		}
@@ -1240,8 +1244,9 @@ qla24xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
 		ret = qla24xx_write_flash_dword(ha,
 		    nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
 		if (ret != QLA_SUCCESS) {
-			DEBUG9(qla_printk("Unable to program nvram address=%x "
-			    "data=%x.\n", naddr, *dwptr));
+			DEBUG9(qla_printk(KERN_WARNING, ha,
+			    "Unable to program nvram address=%x data=%x.\n",
+			    naddr, *dwptr));
 			break;
 		}
 	}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 19d1afc3a34..b63feaf4312 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.01-k1"
+#define QLA2XXX_VERSION      "8.03.01-k3"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 166417a6afb..2de5f3ad640 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1225,8 +1225,8 @@ EXPORT_SYMBOL(__scsi_device_lookup_by_target);
  * @starget:	SCSI target pointer
  * @lun:	SCSI Logical Unit Number
  *
- * Description: Looks up the scsi_device with the specified @channel, @id, @lun
- * for a given host.  The returned scsi_device has an additional reference that
+ * Description: Looks up the scsi_device with the specified @lun for a given
+ * @starget.  The returned scsi_device has an additional reference that
  * needs to be released with scsi_device_put once you're done with it.
  **/
 struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 213123b0486..41a21772df1 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -887,7 +887,7 @@ static int resp_start_stop(struct scsi_cmnd * scp,
 static sector_t get_sdebug_capacity(void)
 {
 	if (scsi_debug_virtual_gb > 0)
-		return 2048 * 1024 * scsi_debug_virtual_gb;
+		return 2048 * 1024 * (sector_t)scsi_debug_virtual_gb;
 	else
 		return sdebug_store_sectors;
 }
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 0c2c73be197..a1689353d7f 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -641,9 +641,9 @@ EXPORT_SYMBOL(scsi_eh_prep_cmnd);
 /**
  * scsi_eh_restore_cmnd  - Restore a scsi command info as part of error recory
  * @scmd:       SCSI command structure to restore
- * @ses:        saved information from a coresponding call to scsi_prep_eh_cmnd
+ * @ses:        saved information from a coresponding call to scsi_eh_prep_cmnd
  *
- * Undo any damage done by above scsi_prep_eh_cmnd().
+ * Undo any damage done by above scsi_eh_prep_cmnd().
  */
 void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 {
@@ -1451,28 +1451,21 @@ static void eh_lock_door_done(struct request *req, int uptodate)
  * @sdev:	SCSI device to prevent medium removal
  *
  * Locking:
- * 	We must be called from process context; scsi_allocate_request()
- * 	may sleep.
+ * 	We must be called from process context.
  *
  * Notes:
  * 	We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
  * 	head of the devices request queue, and continue.
- *
- * Bugs:
- * 	scsi_allocate_request() may sleep waiting for existing requests to
- * 	be processed.  However, since we haven't kicked off any request
- * 	processing for this host, this may deadlock.
- *
- *	If scsi_allocate_request() fails for what ever reason, we
- *	completely forget to lock the door.
  */
 static void scsi_eh_lock_door(struct scsi_device *sdev)
 {
 	struct request *req;
 
+	/*
+	 * blk_get_request with GFP_KERNEL (__GFP_WAIT) sleeps until a
+	 * request becomes available
+	 */
 	req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL);
-	if (!req)
-		return;
 
 	req->cmd[0] = ALLOW_MEDIUM_REMOVAL;
 	req->cmd[1] = 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index dd3f9d2b99f..30f3275e119 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2412,20 +2412,18 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev)
 {
 	struct request_queue *q = sdev->request_queue; 
-	int err;
 	unsigned long flags;
 	
 	/* 
 	 * Try to transition the scsi device to SDEV_RUNNING
 	 * and goose the device queue if successful.  
 	 */
-	err = scsi_device_set_state(sdev, SDEV_RUNNING);
-	if (err) {
-		err = scsi_device_set_state(sdev, SDEV_CREATED);
-
-		if (err)
-			return err;
-	}
+	if (sdev->sdev_state == SDEV_BLOCK)
+		sdev->sdev_state = SDEV_RUNNING;
+	else if (sdev->sdev_state == SDEV_CREATED_BLOCK)
+		sdev->sdev_state = SDEV_CREATED;
+	else
+		return -EINVAL;
 
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_start_queue(q);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index e2b50d8f57a..c4478380140 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -115,12 +115,12 @@ MODULE_PARM_DESC(max_report_luns,
 		 "REPORT LUNS maximum number of LUNS received (should be"
 		 " between 1 and 16384)");
 
-static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
 
 module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(inq_timeout, 
 		 "Timeout (in seconds) waiting for devices to answer INQUIRY."
-		 " Default is 5. Some non-compliant devices need more.");
+		 " Default is 20. Some devices may need more; most need less.");
 
 /* This lock protects only this list */
 static DEFINE_SPINLOCK(async_scan_lock);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 0a2ce7b6325..f3e664628d7 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -37,7 +37,6 @@
 #define ISCSI_TRANSPORT_VERSION "2.0-870"
 
 struct iscsi_internal {
-	int daemon_pid;
 	struct scsi_transport_template t;
 	struct iscsi_transport *iscsi_transport;
 	struct list_head list;
@@ -938,23 +937,9 @@ iscsi_if_transport_lookup(struct iscsi_transport *tt)
 }
 
 static int
-iscsi_broadcast_skb(struct sk_buff *skb, gfp_t gfp)
+iscsi_multicast_skb(struct sk_buff *skb, uint32_t group, gfp_t gfp)
 {
-	return netlink_broadcast(nls, skb, 0, 1, gfp);
-}
-
-static int
-iscsi_unicast_skb(struct sk_buff *skb, int pid)
-{
-	int rc;
-
-	rc = netlink_unicast(nls, skb, pid, MSG_DONTWAIT);
-	if (rc < 0) {
-		printk(KERN_ERR "iscsi: can not unicast skb (%d)\n", rc);
-		return rc;
-	}
-
-	return 0;
+	return nlmsg_multicast(nls, skb, 0, group, gfp);
 }
 
 int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
@@ -980,7 +965,7 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	memset(ev, 0, sizeof(*ev));
 	ev->transport_handle = iscsi_handle(conn->transport);
@@ -991,10 +976,45 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 	memcpy(pdu, hdr, sizeof(struct iscsi_hdr));
 	memcpy(pdu + sizeof(struct iscsi_hdr), data, data_size);
 
-	return iscsi_unicast_skb(skb, priv->daemon_pid);
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(iscsi_recv_pdu);
 
+int iscsi_offload_mesg(struct Scsi_Host *shost,
+		       struct iscsi_transport *transport, uint32_t type,
+		       char *data, uint16_t data_size)
+{
+	struct nlmsghdr	*nlh;
+	struct sk_buff *skb;
+	struct iscsi_uevent *ev;
+	int len = NLMSG_SPACE(sizeof(*ev) + data_size);
+
+	skb = alloc_skb(len, GFP_NOIO);
+	if (!skb) {
+		printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
+		return -ENOMEM;
+	}
+
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
+	ev = NLMSG_DATA(nlh);
+	memset(ev, 0, sizeof(*ev));
+	ev->type = type;
+	ev->transport_handle = iscsi_handle(transport);
+	switch (type) {
+	case ISCSI_KEVENT_PATH_REQ:
+		ev->r.req_path.host_no = shost->host_no;
+		break;
+	case ISCSI_KEVENT_IF_DOWN:
+		ev->r.notify_if_down.host_no = shost->host_no;
+		break;
+	}
+
+	memcpy((char *)ev + sizeof(*ev), data, data_size);
+
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+}
+EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
+
 void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 {
 	struct nlmsghdr	*nlh;
@@ -1014,7 +1034,7 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 		return;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	ev->transport_handle = iscsi_handle(conn->transport);
 	ev->type = ISCSI_KEVENT_CONN_ERROR;
@@ -1022,7 +1042,7 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 	ev->r.connerror.cid = conn->cid;
 	ev->r.connerror.sid = iscsi_conn_get_sid(conn);
 
-	iscsi_broadcast_skb(skb, GFP_ATOMIC);
+	iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
 
 	iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n",
 			      error);
@@ -1030,8 +1050,8 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 EXPORT_SYMBOL_GPL(iscsi_conn_error_event);
 
 static int
-iscsi_if_send_reply(int pid, int seq, int type, int done, int multi,
-		      void *payload, int size)
+iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi,
+		    void *payload, int size)
 {
 	struct sk_buff	*skb;
 	struct nlmsghdr	*nlh;
@@ -1045,10 +1065,10 @@ iscsi_if_send_reply(int pid, int seq, int type, int done, int multi,
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, pid, seq, t, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, t, (len - sizeof(*nlh)), 0);
 	nlh->nlmsg_flags = flags;
 	memcpy(NLMSG_DATA(nlh), payload, size);
-	return iscsi_unicast_skb(skb, pid);
+	return iscsi_multicast_skb(skb, group, GFP_ATOMIC);
 }
 
 static int
@@ -1085,7 +1105,7 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh)
 			return -ENOMEM;
 		}
 
-		nlhstat = __nlmsg_put(skbstat, priv->daemon_pid, 0, 0,
+		nlhstat = __nlmsg_put(skbstat, 0, 0, 0,
 				      (len - sizeof(*nlhstat)), 0);
 		evstat = NLMSG_DATA(nlhstat);
 		memset(evstat, 0, sizeof(*evstat));
@@ -1109,7 +1129,8 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh)
 		skb_trim(skbstat, NLMSG_ALIGN(actual_size));
 		nlhstat->nlmsg_len = actual_size;
 
-		err = iscsi_unicast_skb(skbstat, priv->daemon_pid);
+		err = iscsi_multicast_skb(skbstat, ISCSI_NL_GRP_ISCSID,
+					  GFP_ATOMIC);
 	} while (err < 0 && err != -ECONNREFUSED);
 
 	return err;
@@ -1143,7 +1164,7 @@ int iscsi_session_event(struct iscsi_cls_session *session,
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	ev->transport_handle = iscsi_handle(session->transport);
 
@@ -1172,7 +1193,7 @@ int iscsi_session_event(struct iscsi_cls_session *session,
 	 * this will occur if the daemon is not up, so we just warn
 	 * the user and when the daemon is restarted it will handle it
 	 */
-	rc = iscsi_broadcast_skb(skb, GFP_KERNEL);
+	rc = iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL);
 	if (rc == -ESRCH)
 		iscsi_cls_session_printk(KERN_ERR, session,
 					 "Cannot notify userspace of session "
@@ -1268,26 +1289,54 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 	return err;
 }
 
+static int iscsi_if_ep_connect(struct iscsi_transport *transport,
+			       struct iscsi_uevent *ev, int msg_type)
+{
+	struct iscsi_endpoint *ep;
+	struct sockaddr *dst_addr;
+	struct Scsi_Host *shost = NULL;
+	int non_blocking, err = 0;
+
+	if (!transport->ep_connect)
+		return -EINVAL;
+
+	if (msg_type == ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST) {
+		shost = scsi_host_lookup(ev->u.ep_connect_through_host.host_no);
+		if (!shost) {
+			printk(KERN_ERR "ep connect failed. Could not find "
+			       "host no %u\n",
+			       ev->u.ep_connect_through_host.host_no);
+			return -ENODEV;
+		}
+		non_blocking = ev->u.ep_connect_through_host.non_blocking;
+	} else
+		non_blocking = ev->u.ep_connect.non_blocking;
+
+	dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
+	ep = transport->ep_connect(shost, dst_addr, non_blocking);
+	if (IS_ERR(ep)) {
+		err = PTR_ERR(ep);
+		goto release_host;
+	}
+
+	ev->r.ep_connect_ret.handle = ep->id;
+release_host:
+	if (shost)
+		scsi_host_put(shost);
+	return err;
+}
+
 static int
 iscsi_if_transport_ep(struct iscsi_transport *transport,
 		      struct iscsi_uevent *ev, int msg_type)
 {
 	struct iscsi_endpoint *ep;
-	struct sockaddr *dst_addr;
 	int rc = 0;
 
 	switch (msg_type) {
+	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
 	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
-		if (!transport->ep_connect)
-			return -EINVAL;
-
-		dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
-		ep = transport->ep_connect(dst_addr,
-					   ev->u.ep_connect.non_blocking);
-		if (IS_ERR(ep))
-			return PTR_ERR(ep);
-
-		ev->r.ep_connect_ret.handle = ep->id;
+		rc = iscsi_if_ep_connect(transport, ev, msg_type);
 		break;
 	case ISCSI_UEVENT_TRANSPORT_EP_POLL:
 		if (!transport->ep_poll)
@@ -1365,7 +1414,31 @@ iscsi_set_host_param(struct iscsi_transport *transport,
 }
 
 static int
-iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
+iscsi_set_path(struct iscsi_transport *transport, struct iscsi_uevent *ev)
+{
+	struct Scsi_Host *shost;
+	struct iscsi_path *params;
+	int err;
+
+	if (!transport->set_path)
+		return -ENOSYS;
+
+	shost = scsi_host_lookup(ev->u.set_path.host_no);
+	if (!shost) {
+		printk(KERN_ERR "set path could not find host no %u\n",
+		       ev->u.set_path.host_no);
+		return -ENODEV;
+	}
+
+	params = (struct iscsi_path *)((char *)ev + sizeof(*ev));
+	err = transport->set_path(shost, params);
+
+	scsi_host_put(shost);
+	return err;
+}
+
+static int
+iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
 {
 	int err = 0;
 	struct iscsi_uevent *ev = NLMSG_DATA(nlh);
@@ -1375,6 +1448,11 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	struct iscsi_cls_conn *conn;
 	struct iscsi_endpoint *ep = NULL;
 
+	if (nlh->nlmsg_type == ISCSI_UEVENT_PATH_UPDATE)
+		*group = ISCSI_NL_GRP_UIP;
+	else
+		*group = ISCSI_NL_GRP_ISCSID;
+
 	priv = iscsi_if_transport_lookup(iscsi_ptr(ev->transport_handle));
 	if (!priv)
 		return -EINVAL;
@@ -1383,8 +1461,6 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	if (!try_module_get(transport->owner))
 		return -EINVAL;
 
-	priv->daemon_pid = NETLINK_CREDS(skb)->pid;
-
 	switch (nlh->nlmsg_type) {
 	case ISCSI_UEVENT_CREATE_SESSION:
 		err = iscsi_if_create_session(priv, ep, ev,
@@ -1469,6 +1545,7 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
 	case ISCSI_UEVENT_TRANSPORT_EP_POLL:
 	case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT:
+	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
 		err = iscsi_if_transport_ep(transport, ev, nlh->nlmsg_type);
 		break;
 	case ISCSI_UEVENT_TGT_DSCVR:
@@ -1477,6 +1554,9 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case ISCSI_UEVENT_SET_HOST_PARAM:
 		err = iscsi_set_host_param(transport, ev);
 		break;
+	case ISCSI_UEVENT_PATH_UPDATE:
+		err = iscsi_set_path(transport, ev);
+		break;
 	default:
 		err = -ENOSYS;
 		break;
@@ -1499,6 +1579,7 @@ iscsi_if_rx(struct sk_buff *skb)
 		uint32_t rlen;
 		struct nlmsghdr	*nlh;
 		struct iscsi_uevent *ev;
+		uint32_t group;
 
 		nlh = nlmsg_hdr(skb);
 		if (nlh->nlmsg_len < sizeof(*nlh) ||
@@ -1511,7 +1592,7 @@ iscsi_if_rx(struct sk_buff *skb)
 		if (rlen > skb->len)
 			rlen = skb->len;
 
-		err = iscsi_if_recv_msg(skb, nlh);
+		err = iscsi_if_recv_msg(skb, nlh, &group);
 		if (err) {
 			ev->type = ISCSI_KEVENT_IF_ERROR;
 			ev->iferror = err;
@@ -1525,8 +1606,7 @@ iscsi_if_rx(struct sk_buff *skb)
 			 */
 			if (ev->type == ISCSI_UEVENT_GET_STATS && !err)
 				break;
-			err = iscsi_if_send_reply(
-				NETLINK_CREDS(skb)->pid, nlh->nlmsg_seq,
+			err = iscsi_if_send_reply(group, nlh->nlmsg_seq,
 				nlh->nlmsg_type, 0, 0, ev, sizeof(*ev));
 		} while (err < 0 && err != -ECONNREFUSED);
 		skb_pull(skb, rlen);
@@ -1774,7 +1854,6 @@ iscsi_register_transport(struct iscsi_transport *tt)
 	if (!priv)
 		return NULL;
 	INIT_LIST_HEAD(&priv->list);
-	priv->daemon_pid = -1;
 	priv->iscsi_transport = tt;
 	priv->t.user_scan = iscsi_user_scan;
 	priv->t.create_work_queue = 1;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index bcf3bd40bbd..878b17a9af3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1902,24 +1902,6 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 	index = sdkp->index;
 	dev = &sdp->sdev_gendev;
 
-	if (!sdp->request_queue->rq_timeout) {
-		if (sdp->type != TYPE_MOD)
-			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
-		else
-			blk_queue_rq_timeout(sdp->request_queue,
-					     SD_MOD_TIMEOUT);
-	}
-
-	device_initialize(&sdkp->dev);
-	sdkp->dev.parent = &sdp->sdev_gendev;
-	sdkp->dev.class = &sd_disk_class;
-	dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
-
-	if (device_add(&sdkp->dev))
-		goto out_free_index;
-
-	get_device(&sdp->sdev_gendev);
-
 	if (index < SD_MAX_DISKS) {
 		gd->major = sd_major((index & 0xf0) >> 4);
 		gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
@@ -1954,11 +1936,6 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
-
-	return;
-
- out_free_index:
-	ida_remove(&sd_index_ida, index);
 }
 
 /**
@@ -2026,6 +2003,24 @@ static int sd_probe(struct device *dev)
 	sdkp->openers = 0;
 	sdkp->previous_state = 1;
 
+	if (!sdp->request_queue->rq_timeout) {
+		if (sdp->type != TYPE_MOD)
+			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
+		else
+			blk_queue_rq_timeout(sdp->request_queue,
+					     SD_MOD_TIMEOUT);
+	}
+
+	device_initialize(&sdkp->dev);
+	sdkp->dev.parent = &sdp->sdev_gendev;
+	sdkp->dev.class = &sd_disk_class;
+	dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
+
+	if (device_add(&sdkp->dev))
+		goto out_free_index;
+
+	get_device(&sdp->sdev_gendev);
+
 	async_schedule(sd_probe_async, sdkp);
 
 	return 0;
@@ -2055,8 +2050,10 @@ static int sd_probe(struct device *dev)
  **/
 static int sd_remove(struct device *dev)
 {
-	struct scsi_disk *sdkp = dev_get_drvdata(dev);
+	struct scsi_disk *sdkp;
 
+	async_synchronize_full();
+	sdkp = dev_get_drvdata(dev);
 	device_del(&sdkp->dev);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 89bd438e1fe..b33d04250bb 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2964,7 +2964,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 			    !(STp->use_pf & PF_TESTED)) {
 				/* Try the other possible state of Page Format if not
 				   already tried */
-				STp->use_pf = !STp->use_pf | PF_TESTED;
+				STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
 				st_release_request(SRpnt);
 				SRpnt = NULL;
 				return st_int_ioctl(STp, cmd_in, arg);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 583966ec826..45374d66d26 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -737,11 +737,14 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 	struct sym_hcb *np = sym_get_hcb(sdev->host);
 	struct sym_tcb *tp = &np->target[sdev->id];
 	struct sym_lcb *lp;
+	unsigned long flags;
+	int error;
 
 	if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
 		return -ENXIO;
 
-	tp->starget = sdev->sdev_target;
+	spin_lock_irqsave(np->s.host->host_lock, flags);
+
 	/*
 	 * Fail the device init if the device is flagged NOSCAN at BOOT in
 	 * the NVRAM.  This may speed up boot and maintain coherency with
@@ -753,26 +756,37 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 
 	if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) {
 		tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
-		starget_printk(KERN_INFO, tp->starget,
+		starget_printk(KERN_INFO, sdev->sdev_target,
 				"Scan at boot disabled in NVRAM\n");
-		return -ENXIO;
+		error = -ENXIO;
+		goto out;
 	}
 
 	if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) {
-		if (sdev->lun != 0)
-			return -ENXIO;
-		starget_printk(KERN_INFO, tp->starget,
+		if (sdev->lun != 0) {
+			error = -ENXIO;
+			goto out;
+		}
+		starget_printk(KERN_INFO, sdev->sdev_target,
 				"Multiple LUNs disabled in NVRAM\n");
 	}
 
 	lp = sym_alloc_lcb(np, sdev->id, sdev->lun);
-	if (!lp)
-		return -ENOMEM;
+	if (!lp) {
+		error = -ENOMEM;
+		goto out;
+	}
+	if (tp->nlcb == 1)
+		tp->starget = sdev->sdev_target;
 
 	spi_min_period(tp->starget) = tp->usr_period;
 	spi_max_width(tp->starget) = tp->usr_width;
 
-	return 0;
+	error = 0;
+out:
+	spin_unlock_irqrestore(np->s.host->host_lock, flags);
+
+	return error;
 }
 
 /*
@@ -819,12 +833,34 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev)
 static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
 {
 	struct sym_hcb *np = sym_get_hcb(sdev->host);
-	struct sym_lcb *lp = sym_lp(&np->target[sdev->id], sdev->lun);
+	struct sym_tcb *tp = &np->target[sdev->id];
+	struct sym_lcb *lp = sym_lp(tp, sdev->lun);
+	unsigned long flags;
+
+	spin_lock_irqsave(np->s.host->host_lock, flags);
+
+	if (lp->busy_itlq || lp->busy_itl) {
+		/*
+		 * This really shouldn't happen, but we can't return an error
+		 * so let's try to stop all on-going I/O.
+		 */
+		starget_printk(KERN_WARNING, tp->starget,
+			       "Removing busy LCB (%d)\n", sdev->lun);
+		sym_reset_scsi_bus(np, 1);
+	}
 
-	if (lp->itlq_tbl)
-		sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK * 4, "ITLQ_TBL");
-	kfree(lp->cb_tags);
-	sym_mfree_dma(lp, sizeof(*lp), "LCB");
+	if (sym_free_lcb(np, sdev->id, sdev->lun) == 0) {
+		/*
+		 * It was the last unit for this target.
+		 */
+		tp->head.sval        = 0;
+		tp->head.wval        = np->rv_scntl3;
+		tp->head.uval        = 0;
+		tp->tgoal.check_nego = 1;
+		tp->starget	     = NULL;
+	}
+
+	spin_unlock_irqrestore(np->s.host->host_lock, flags);
 }
 
 /*
@@ -890,6 +926,8 @@ static void sym_exec_user_command (struct sym_hcb *np, struct sym_usrcmd *uc)
 			if (!((uc->target >> t) & 1))
 				continue;
 			tp = &np->target[t];
+			if (!tp->nlcb)
+				continue;
 
 			switch (uc->cmd) {
 
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index ffa70d1ed18..69ad4945c93 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -1896,6 +1896,15 @@ void sym_start_up(struct Scsi_Host *shost, int reason)
 		tp->head.sval = 0;
 		tp->head.wval = np->rv_scntl3;
 		tp->head.uval = 0;
+		if (tp->lun0p)
+			tp->lun0p->to_clear = 0;
+		if (tp->lunmp) {
+			int ln;
+
+			for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
+				if (tp->lunmp[ln])
+					tp->lunmp[ln]->to_clear = 0;
+		}
 	}
 
 	/*
@@ -4988,7 +4997,7 @@ struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
 	 */
 	if (ln && !tp->lunmp) {
 		tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
-				GFP_KERNEL);
+				GFP_ATOMIC);
 		if (!tp->lunmp)
 			goto fail;
 	}
@@ -5008,6 +5017,7 @@ struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
 		tp->lun0p = lp;
 		tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
 	}
+	tp->nlcb++;
 
 	/*
 	 *  Let the itl task point to error handling.
@@ -5085,6 +5095,43 @@ fail:
 }
 
 /*
+ *  Lun control block deallocation. Returns the number of valid remaing LCBs
+ *  for the target.
+ */
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
+{
+	struct sym_tcb *tp = &np->target[tn];
+	struct sym_lcb *lp = sym_lp(tp, ln);
+
+	tp->nlcb--;
+
+	if (ln) {
+		if (!tp->nlcb) {
+			kfree(tp->lunmp);
+			sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
+			tp->lunmp = NULL;
+			tp->luntbl = NULL;
+			tp->head.luntbl_sa = cpu_to_scr(vtobus(np->badluntbl));
+		} else {
+			tp->luntbl[ln] = cpu_to_scr(vtobus(&np->badlun_sa));
+			tp->lunmp[ln] = NULL;
+		}
+	} else {
+		tp->lun0p = NULL;
+		tp->head.lun0_sa = cpu_to_scr(vtobus(&np->badlun_sa));
+	}
+
+	if (lp->itlq_tbl) {
+		sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
+		kfree(lp->cb_tags);
+	}
+
+	sym_mfree_dma(lp, sizeof(*lp), "LCB");
+
+	return tp->nlcb;
+}
+
+/*
  *  Queue a SCSI IO to the controller.
  */
 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 9ebc8706b6b..053e63c8682 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -401,6 +401,7 @@ struct sym_tcb {
 	 *  An array of bus addresses is used on reselection.
 	 */
 	u32	*luntbl;	/* LCBs bus address table	*/
+	int	nlcb;		/* Number of valid LCBs (including LUN #0) */
 
 	/*
 	 *  LUN table used by the C code.
@@ -1065,6 +1066,7 @@ int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int
 struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order);
 void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp);
 struct sym_lcb *sym_alloc_lcb(struct sym_hcb *np, u_char tn, u_char ln);
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln);
 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
 int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *ccb, int timed_out);
 int sym_reset_scsi_target(struct sym_hcb *np, int target);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 641e800ed69..1132c5cae7a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -861,7 +861,7 @@ config SERIAL_UARTLITE
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called uartlite.ko.
+	  module will be called uartlite.
 
 config SERIAL_UARTLITE_CONSOLE
 	bool "Support for console on Xilinx uartlite serial port"
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index cdc049d4350..58a4879c7e4 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 88fdac51b6c..bf82e28770a 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
 	struct clk		*clk;
 	unsigned int		im;	/* interrupt mask */
 	unsigned int		old_status;
+	unsigned int		ifls;	/* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+	unsigned int		ifls;
+	unsigned int		fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.fifosize		= 16,
+};
+
+static struct vendor_data vendor_st = {
+	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+	.fifosize		= 64,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-	       uap->port.membase + UART011_IFLS);
+	writew(uap->ifls, uap->port.membase + UART011_IFLS);
 
 	/*
 	 * Provoke TX FIFO interrupt into asserting.
@@ -732,6 +748,7 @@ static struct uart_driver amba_reg = {
 static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
+	struct vendor_data *vendor = id->data;
 	void __iomem *base;
 	int i, ret;
 
@@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto unmap;
 	}
 
+	uap->ifls = vendor->ifls;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
 	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = dev->irq[0];
-	uap->port.fifosize = 16;
+	uap->port.fifosize = vendor->fifosize;
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
 	{
 		.id	= 0x00041011,
 		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		.id	= 0x00380802,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_st,
 	},
 	{ 0, 0 },
 };
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
 	uart_unregister_driver(&amba_reg);
 }
 
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
 module_exit(pl011_exit);
 
 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index b3497d7e535..338b15c0a54 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1104,11 +1104,13 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	/* update the per-port timeout */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	/* save/disable interrupts and drain transmitter */
+	/*
+	 * save/disable interrupts. The tty layer will ensure that the
+	 * transmitter is empty if requested by the caller, so there's
+	 * no need to wait for it here.
+	 */
 	imr = UART_GET_IMR(port);
 	UART_PUT_IDR(port, -1);
-	while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
-		cpu_relax();
 
 	/* disable receiver and transmitter */
 	UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7b5d1de9cfe..5d7b58f1fe4 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -71,7 +71,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -101,7 +101,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -132,7 +132,7 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -186,13 +186,6 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR	204
-#define MINOR_START		41
-#define DEV_NAME		"ttySMX"
-#define MAX_INTERNAL_IRQ	IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
@@ -931,11 +924,13 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	tdiv64 = sport->port.uartclk;
-	tdiv64 *= num;
-	do_div(tdiv64, denom * 16 * div);
-	tty_encode_baud_rate(sport->port.info->port.tty,
-		(speed_t)tdiv64, (speed_t)tdiv64);
+	if (port->info && port->info->port.tty) {
+		tdiv64 = sport->port.uartclk;
+		tdiv64 *= num;
+		do_div(tdiv64, denom * 16 * div);
+		tty_encode_baud_rate(sport->port.info->port.tty,
+				(speed_t)tdiv64, (speed_t)tdiv64);
+	}
 
 	num -= 1;
 	denom -= 1;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7546aa887fa..79c9c5f5cdb 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -681,7 +681,7 @@ static int serial_config(struct pcmcia_device * link)
 	u_char *buf;
 	cisparse_t *parse;
 	cistpl_cftable_entry_t *cf;
-	int i;
+	int i, last_ret, last_fn;
 
 	DEBUG(0, "serial_config(0x%p)\n", link);
 
@@ -699,6 +699,16 @@ static int serial_config(struct pcmcia_device * link)
 	tuple->TupleDataMax = 255;
 	tuple->Attributes = 0;
 
+	/* Get configuration register information */
+	tuple->DesiredTuple = CISTPL_CONFIG;
+	last_ret = first_tuple(link, tuple, parse);
+	if (last_ret != 0) {
+		last_fn = ParseTuple;
+		goto cs_failed;
+	}
+	link->conf.ConfigBase = parse->config.base;
+	link->conf.Present = parse->config.rmask[0];
+
 	/* Is this a compliant multifunction card? */
 	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
 	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
@@ -761,7 +771,9 @@ static int serial_config(struct pcmcia_device * link)
 	kfree(cfg_mem);
 	return 0;
 
- failed:
+cs_failed:
+	cs_error(link, last_fn, last_ret);
+failed:
 	serial_remove(link);
 	kfree(cfg_mem);
 	return -ENODEV;
@@ -863,10 +875,10 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"),  /* Sierra Wireless AC850 3G Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"),	/* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d5296..e8aae227b5e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
 
 config SPI_IMX
 	tristate "Freescale iMX SPI controller"
-	depends on ARCH_IMX && EXPERIMENTAL
+	depends on ARCH_MX1 && EXPERIMENTAL
 	help
 	  This enables using the Freescale iMX SPI controller in master
 	  mode.
@@ -171,6 +171,15 @@ config SPI_ORION
 	help
 	  This enables using the SPI master controller on the Orion chips.
 
+config SPI_PL022
+	tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
+	depends on ARM_AMBA && EXPERIMENTAL
+	default y if MACH_U300
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+	  controller. If you have an embedded system with an AMBA(R)
+	  bus and a PL022 controller, say Y or M here.
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on ARCH_PXA && EXPERIMENTAL
@@ -212,7 +221,7 @@ config SPI_TXX9
 
 config SPI_XILINX
 	tristate "Xilinx SPI controller"
-	depends on XILINX_VIRTEX && EXPERIMENTAL
+	depends on (XILINX_VIRTEX || MICROBLAZE) && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  This exposes the SPI controller IP from the Xilinx EDK.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d0451936d8..ecfadb18048 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
+obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
new file mode 100644
index 00000000000..da76797ce8b
--- /dev/null
+++ b/drivers/spi/amba-pl022.c
@@ -0,0 +1,1866 @@
+/*
+ * drivers/spi/amba-pl022.c
+ *
+ * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * TODO:
+ * - add timeout on polled transfers
+ * - add generic DMA framework support
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+/*
+ * This macro is used to define some register default values.
+ * reg is masked with mask, the OR:ed with an (again masked)
+ * val shifted sb steps to the left.
+ */
+#define SSP_WRITE_BITS(reg, val, mask, sb) \
+ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
+
+/*
+ * This macro is also used to define some default values.
+ * It will just shift val by sb steps to the left and mask
+ * the result with mask.
+ */
+#define GEN_MASK_BITS(val, mask, sb) \
+ (((val)<<(sb)) & (mask))
+
+#define DRIVE_TX		0
+#define DO_NOT_DRIVE_TX		1
+
+#define DO_NOT_QUEUE_DMA	0
+#define QUEUE_DMA		1
+
+#define RX_TRANSFER		1
+#define TX_TRANSFER		2
+
+/*
+ * Macros to access SSP Registers with their offsets
+ */
+#define SSP_CR0(r)	(r + 0x000)
+#define SSP_CR1(r)	(r + 0x004)
+#define SSP_DR(r)	(r + 0x008)
+#define SSP_SR(r)	(r + 0x00C)
+#define SSP_CPSR(r)	(r + 0x010)
+#define SSP_IMSC(r)	(r + 0x014)
+#define SSP_RIS(r)	(r + 0x018)
+#define SSP_MIS(r)	(r + 0x01C)
+#define SSP_ICR(r)	(r + 0x020)
+#define SSP_DMACR(r)	(r + 0x024)
+#define SSP_ITCR(r)	(r + 0x080)
+#define SSP_ITIP(r)	(r + 0x084)
+#define SSP_ITOP(r)	(r + 0x088)
+#define SSP_TDR(r)	(r + 0x08C)
+
+#define SSP_PID0(r)	(r + 0xFE0)
+#define SSP_PID1(r)	(r + 0xFE4)
+#define SSP_PID2(r)	(r + 0xFE8)
+#define SSP_PID3(r)	(r + 0xFEC)
+
+#define SSP_CID0(r)	(r + 0xFF0)
+#define SSP_CID1(r)	(r + 0xFF4)
+#define SSP_CID2(r)	(r + 0xFF8)
+#define SSP_CID3(r)	(r + 0xFFC)
+
+/*
+ * SSP Control Register 0  - SSP_CR0
+ */
+#define SSP_CR0_MASK_DSS	(0x1FUL << 0)
+#define SSP_CR0_MASK_HALFDUP	(0x1UL << 5)
+#define SSP_CR0_MASK_SPO	(0x1UL << 6)
+#define SSP_CR0_MASK_SPH	(0x1UL << 7)
+#define SSP_CR0_MASK_SCR	(0xFFUL << 8)
+#define SSP_CR0_MASK_CSS	(0x1FUL << 16)
+#define SSP_CR0_MASK_FRF	(0x3UL << 21)
+
+/*
+ * SSP Control Register 0  - SSP_CR1
+ */
+#define SSP_CR1_MASK_LBM	(0x1UL << 0)
+#define SSP_CR1_MASK_SSE	(0x1UL << 1)
+#define SSP_CR1_MASK_MS		(0x1UL << 2)
+#define SSP_CR1_MASK_SOD	(0x1UL << 3)
+#define SSP_CR1_MASK_RENDN	(0x1UL << 4)
+#define SSP_CR1_MASK_TENDN	(0x1UL << 5)
+#define SSP_CR1_MASK_MWAIT	(0x1UL << 6)
+#define SSP_CR1_MASK_RXIFLSEL	(0x7UL << 7)
+#define SSP_CR1_MASK_TXIFLSEL	(0x7UL << 10)
+
+/*
+ * SSP Data Register - SSP_DR
+ */
+#define SSP_DR_MASK_DATA	0xFFFFFFFF
+
+/*
+ * SSP Status Register - SSP_SR
+ */
+#define SSP_SR_MASK_TFE		(0x1UL << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF		(0x1UL << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE		(0x1UL << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF 	(0x1UL << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY		(0x1UL << 4) /* Busy Flag */
+
+/*
+ * SSP Clock Prescale Register  - SSP_CPSR
+ */
+#define SSP_CPSR_MASK_CPSDVSR	(0xFFUL << 0)
+
+/*
+ * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
+ */
+#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
+#define SSP_IMSC_MASK_RTIM  (0x1UL << 1) /* Receive timeout Interrupt mask */
+#define SSP_IMSC_MASK_RXIM  (0x1UL << 2) /* Receive FIFO Interrupt mask */
+#define SSP_IMSC_MASK_TXIM  (0x1UL << 3) /* Transmit FIFO Interrupt mask */
+
+/*
+ * SSP Raw Interrupt Status Register - SSP_RIS
+ */
+/* Receive Overrun Raw Interrupt status */
+#define SSP_RIS_MASK_RORRIS		(0x1UL << 0)
+/* Receive Timeout Raw Interrupt status */
+#define SSP_RIS_MASK_RTRIS		(0x1UL << 1)
+/* Receive FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_RXRIS		(0x1UL << 2)
+/* Transmit FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_TXRIS		(0x1UL << 3)
+
+/*
+ * SSP Masked Interrupt Status Register - SSP_MIS
+ */
+/* Receive Overrun Masked Interrupt status */
+#define SSP_MIS_MASK_RORMIS		(0x1UL << 0)
+/* Receive Timeout Masked Interrupt status */
+#define SSP_MIS_MASK_RTMIS		(0x1UL << 1)
+/* Receive FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_RXMIS		(0x1UL << 2)
+/* Transmit FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_TXMIS		(0x1UL << 3)
+
+/*
+ * SSP Interrupt Clear Register - SSP_ICR
+ */
+/* Receive Overrun Raw Clear Interrupt bit */
+#define SSP_ICR_MASK_RORIC		(0x1UL << 0)
+/* Receive Timeout Clear Interrupt bit */
+#define SSP_ICR_MASK_RTIC		(0x1UL << 1)
+
+/*
+ * SSP DMA Control Register - SSP_DMACR
+ */
+/* Receive DMA Enable bit */
+#define SSP_DMACR_MASK_RXDMAE		(0x1UL << 0)
+/* Transmit DMA Enable bit */
+#define SSP_DMACR_MASK_TXDMAE		(0x1UL << 1)
+
+/*
+ * SSP Integration Test control Register - SSP_ITCR
+ */
+#define SSP_ITCR_MASK_ITEN		(0x1UL << 0)
+#define SSP_ITCR_MASK_TESTFIFO		(0x1UL << 1)
+
+/*
+ * SSP Integration Test Input Register - SSP_ITIP
+ */
+#define ITIP_MASK_SSPRXD		 (0x1UL << 0)
+#define ITIP_MASK_SSPFSSIN		 (0x1UL << 1)
+#define ITIP_MASK_SSPCLKIN		 (0x1UL << 2)
+#define ITIP_MASK_RXDMAC		 (0x1UL << 3)
+#define ITIP_MASK_TXDMAC		 (0x1UL << 4)
+#define ITIP_MASK_SSPTXDIN		 (0x1UL << 5)
+
+/*
+ * SSP Integration Test output Register - SSP_ITOP
+ */
+#define ITOP_MASK_SSPTXD		 (0x1UL << 0)
+#define ITOP_MASK_SSPFSSOUT		 (0x1UL << 1)
+#define ITOP_MASK_SSPCLKOUT		 (0x1UL << 2)
+#define ITOP_MASK_SSPOEn		 (0x1UL << 3)
+#define ITOP_MASK_SSPCTLOEn		 (0x1UL << 4)
+#define ITOP_MASK_RORINTR		 (0x1UL << 5)
+#define ITOP_MASK_RTINTR		 (0x1UL << 6)
+#define ITOP_MASK_RXINTR		 (0x1UL << 7)
+#define ITOP_MASK_TXINTR		 (0x1UL << 8)
+#define ITOP_MASK_INTR			 (0x1UL << 9)
+#define ITOP_MASK_RXDMABREQ		 (0x1UL << 10)
+#define ITOP_MASK_RXDMASREQ		 (0x1UL << 11)
+#define ITOP_MASK_TXDMABREQ		 (0x1UL << 12)
+#define ITOP_MASK_TXDMASREQ		 (0x1UL << 13)
+
+/*
+ * SSP Test Data Register - SSP_TDR
+ */
+#define TDR_MASK_TESTDATA 		(0xFFFFFFFF)
+
+/*
+ * Message State
+ * we use the spi_message.state (void *) pointer to
+ * hold a single state value, that's why all this
+ * (void *) casting is done here.
+ */
+#define STATE_START                     ((void *) 0)
+#define STATE_RUNNING                   ((void *) 1)
+#define STATE_DONE                      ((void *) 2)
+#define STATE_ERROR                     ((void *) -1)
+
+/*
+ * Queue State
+ */
+#define QUEUE_RUNNING                   (0)
+#define QUEUE_STOPPED                   (1)
+/*
+ * SSP State - Whether Enabled or Disabled
+ */
+#define SSP_DISABLED 			(0)
+#define SSP_ENABLED 			(1)
+
+/*
+ * SSP DMA State - Whether DMA Enabled or Disabled
+ */
+#define SSP_DMA_DISABLED 		(0)
+#define SSP_DMA_ENABLED 		(1)
+
+/*
+ * SSP Clock Defaults
+ */
+#define NMDK_SSP_DEFAULT_CLKRATE 0x2
+#define NMDK_SSP_DEFAULT_PRESCALE 0x40
+
+/*
+ * SSP Clock Parameter ranges
+ */
+#define CPSDVR_MIN 0x02
+#define CPSDVR_MAX 0xFE
+#define SCR_MIN 0x00
+#define SCR_MAX 0xFF
+
+/*
+ * SSP Interrupt related Macros
+ */
+#define DEFAULT_SSP_REG_IMSC  0x0UL
+#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
+#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+
+#define CLEAR_ALL_INTERRUPTS  0x3
+
+
+/*
+ * The type of reading going on on this chip
+ */
+enum ssp_reading {
+	READING_NULL,
+	READING_U8,
+	READING_U16,
+	READING_U32
+};
+
+/**
+ * The type of writing going on on this chip
+ */
+enum ssp_writing {
+	WRITING_NULL,
+	WRITING_U8,
+	WRITING_U16,
+	WRITING_U32
+};
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL022 derivates
+ * @fifodepth: depth of FIFOs (both)
+ * @max_bpw: maximum number of bits per word
+ * @unidir: supports unidirection transfers
+ */
+struct vendor_data {
+	int fifodepth;
+	int max_bpw;
+	bool unidir;
+};
+
+/**
+ * struct pl022 - This is the private SSP driver data structure
+ * @adev: AMBA device model hookup
+ * @phybase: The physical memory where the SSP device resides
+ * @virtbase: The virtual memory where the SSP is mapped
+ * @master: SPI framework hookup
+ * @master_info: controller-specific data from machine setup
+ * @regs: SSP controller register's virtual address
+ * @pump_messages: Work struct for scheduling work to the workqueue
+ * @lock: spinlock to syncronise access to driver data
+ * @workqueue: a workqueue on which any spi_message request is queued
+ * @busy: workqueue is busy
+ * @run: workqueue is running
+ * @pump_transfers: Tasklet used in Interrupt Transfer mode
+ * @cur_msg: Pointer to current spi_message being processed
+ * @cur_transfer: Pointer to current spi_transfer
+ * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @tx: current position in TX buffer to be read
+ * @tx_end: end position in TX buffer to be read
+ * @rx: current position in RX buffer to be written
+ * @rx_end: end position in RX buffer to be written
+ * @readingtype: the type of read currently going on
+ * @writingtype: the type or write currently going on
+ */
+struct pl022 {
+	struct amba_device		*adev;
+	struct vendor_data		*vendor;
+	resource_size_t			phybase;
+	void __iomem			*virtbase;
+	struct clk			*clk;
+	struct spi_master		*master;
+	struct pl022_ssp_controller	*master_info;
+	/* Driver message queue */
+	struct workqueue_struct		*workqueue;
+	struct work_struct		pump_messages;
+	spinlock_t			queue_lock;
+	struct list_head		queue;
+	int				busy;
+	int				run;
+	/* Message transfer pump */
+	struct tasklet_struct		pump_transfers;
+	struct spi_message		*cur_msg;
+	struct spi_transfer		*cur_transfer;
+	struct chip_data		*cur_chip;
+	void				*tx;
+	void				*tx_end;
+	void				*rx;
+	void				*rx_end;
+	enum ssp_reading		read;
+	enum ssp_writing		write;
+};
+
+/**
+ * struct chip_data - To maintain runtime state of SSP for each client chip
+ * @cr0: Value of control register CR0 of SSP
+ * @cr1: Value of control register CR1 of SSP
+ * @dmacr: Value of DMA control Register of SSP
+ * @cpsr: Value of Clock prescale register
+ * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
+ * @enable_dma: Whether to enable DMA or not
+ * @write: function ptr to be used to write when doing xfer for this chip
+ * @read: function ptr to be used to read when doing xfer for this chip
+ * @cs_control: chip select callback provided by chip
+ * @xfer_type: polling/interrupt/DMA
+ *
+ * Runtime state of the SSP controller, maintained per chip,
+ * This would be set according to the current message that would be served
+ */
+struct chip_data {
+	u16 cr0;
+	u16 cr1;
+	u16 dmacr;
+	u16 cpsr;
+	u8 n_bytes;
+	u8 enable_dma:1;
+	enum ssp_reading read;
+	enum ssp_writing write;
+	void (*cs_control) (u32 command);
+	int xfer_type;
+};
+
+/**
+ * null_cs_control - Dummy chip select function
+ * @command: select/delect the chip
+ *
+ * If no chip select function is provided by client this is used as dummy
+ * chip select
+ */
+static void null_cs_control(u32 command)
+{
+	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
+}
+
+/**
+ * giveback - current spi_message is over, schedule next message and call
+ * callback of this message. Assumes that caller already
+ * set message->status; dma and pio irqs are blocked
+ * @pl022: SSP driver private data structure
+ */
+static void giveback(struct pl022 *pl022)
+{
+	struct spi_transfer *last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+	void (*curr_cs_control) (u32 command);
+
+	/*
+	 * This local reference to the chip select function
+	 * is needed because we set curr_chip to NULL
+	 * as a step toward termininating the message.
+	 */
+	curr_cs_control = pl022->cur_chip->cs_control;
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	msg = pl022->cur_msg;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		/*
+		 * FIXME: This runs in interrupt context.
+		 * Is this really smart?
+		 */
+		udelay(last_transfer->delay_usecs);
+
+	/*
+	 * Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
+	if (!last_transfer->cs_change)
+		curr_cs_control(SSP_CHIP_DESELECT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+		if (list_empty(&pl022->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(pl022->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == STATE_ERROR)
+			curr_cs_control(SSP_CHIP_DESELECT);
+	}
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+	/* This message is completed, so let's turn off the clock! */
+	clk_disable(pl022->clk);
+}
+
+/**
+ * flush - flush the FIFO to reach a clean state
+ * @pl022: SSP driver private data structure
+ */
+static int flush(struct pl022 *pl022)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	dev_dbg(&pl022->adev->dev, "flush\n");
+	do {
+		while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+			readw(SSP_DR(pl022->virtbase));
+	} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+	return limit;
+}
+
+/**
+ * restore_state - Load configuration of current chip
+ * @pl022: SSP driver private data structure
+ */
+static void restore_state(struct pl022 *pl022)
+{
+	struct chip_data *chip = pl022->cur_chip;
+
+	writew(chip->cr0, SSP_CR0(pl022->virtbase));
+	writew(chip->cr1, SSP_CR1(pl022->virtbase));
+	writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
+	writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * load_ssp_default_config - Load default configuration for SSP
+ * @pl022: SSP driver private data structure
+ */
+
+/*
+ * Default SSP Register Values
+ */
+#define DEFAULT_SSP_REG_CR0 ( \
+	GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0)	| \
+	GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
+	GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
+	GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
+	GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16)	| \
+	GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
+)
+
+#define DEFAULT_SSP_REG_CR1 ( \
+	GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
+	GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
+	GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
+	GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
+	GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
+	GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
+	GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
+	GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
+	GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
+)
+
+#define DEFAULT_SSP_REG_CPSR ( \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
+)
+
+#define DEFAULT_SSP_REG_DMACR (\
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
+)
+
+
+static void load_ssp_default_config(struct pl022 *pl022)
+{
+	writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * This will write to TX and read from RX according to the parameters
+ * set in pl022.
+ */
+static void readwriter(struct pl022 *pl022)
+{
+
+	/*
+	 * The FIFO depth is different inbetween primecell variants.
+	 * I believe filling in too much in the FIFO might cause
+	 * errons in 8bit wide transfers on ARM variants (just 8 words
+	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
+	 *
+	 * FIXME: currently we have no logic to account for this.
+	 * perhaps there is even something broken in HW regarding
+	 * 8bit transfers (it doesn't fail on 16bit) so this needs
+	 * more investigation...
+	 */
+	dev_dbg(&pl022->adev->dev,
+		"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
+		__func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
+
+	/* Read as much as you can */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+	       && (pl022->rx < pl022->rx_end)) {
+		switch (pl022->read) {
+		case READING_NULL:
+			readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U8:
+			*(u8 *) (pl022->rx) =
+				readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+			break;
+		case READING_U16:
+			*(u16 *) (pl022->rx) =
+				(u16) readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U32:
+			*(u32 *) (pl022->rx) =
+				readl(SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->rx += (pl022->cur_chip->n_bytes);
+	}
+	/*
+	 * Write as much as you can, while keeping an eye on the RX FIFO!
+	 */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+	       && (pl022->tx < pl022->tx_end)) {
+		switch (pl022->write) {
+		case WRITING_NULL:
+			writew(0x0, SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U8:
+			writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U16:
+			writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U32:
+			writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->tx += (pl022->cur_chip->n_bytes);
+		/*
+		 * This inner reader takes care of things appearing in the RX
+		 * FIFO as we're transmitting. This will happen a lot since the
+		 * clock starts running when you put things into the TX FIFO,
+		 * and then things are continously clocked into the RX FIFO.
+		 */
+		while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+		       && (pl022->rx < pl022->rx_end)) {
+			switch (pl022->read) {
+			case READING_NULL:
+				readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U8:
+				*(u8 *) (pl022->rx) =
+					readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+				break;
+			case READING_U16:
+				*(u16 *) (pl022->rx) =
+					(u16) readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U32:
+				*(u32 *) (pl022->rx) =
+					readl(SSP_DR(pl022->virtbase));
+				break;
+			}
+			pl022->rx += (pl022->cur_chip->n_bytes);
+		}
+	}
+	/*
+	 * When we exit here the TX FIFO should be full and the RX FIFO
+	 * should be empty
+	 */
+}
+
+
+/**
+ * next_transfer - Move to the Next transfer in the current spi message
+ * @pl022: SSP driver private data structure
+ *
+ * This function moves though the linked list of spi transfers in the
+ * current spi message and returns with the state of current spi
+ * message i.e whether its last transfer is done(STATE_DONE) or
+ * Next transfer is ready(STATE_RUNNING)
+ */
+static void *next_transfer(struct pl022 *pl022)
+{
+	struct spi_message *msg = pl022->cur_msg;
+	struct spi_transfer *trans = pl022->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		pl022->cur_transfer =
+		    list_entry(trans->transfer_list.next,
+			       struct spi_transfer, transfer_list);
+		return STATE_RUNNING;
+	}
+	return STATE_DONE;
+}
+/**
+ * pl022_interrupt_handler - Interrupt handler for SSP controller
+ *
+ * This function handles interrupts generated for an interrupt based transfer.
+ * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
+ * current message's state as STATE_ERROR and schedule the tasklet
+ * pump_transfers which will do the postprocessing of the current message by
+ * calling giveback(). Otherwise it reads data from RX FIFO till there is no
+ * more data, and writes data in TX FIFO till it is not full. If we complete
+ * the transfer we move to the next transfer and schedule the tasklet.
+ */
+static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
+{
+	struct pl022 *pl022 = dev_id;
+	struct spi_message *msg = pl022->cur_msg;
+	u16 irq_status = 0;
+	u16 flag = 0;
+
+	if (unlikely(!msg)) {
+		dev_err(&pl022->adev->dev,
+			"bad message state in interrupt handler");
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	/* Read the Interrupt Status Register */
+	irq_status = readw(SSP_MIS(pl022->virtbase));
+
+	if (unlikely(!irq_status))
+		return IRQ_NONE;
+
+	/* This handles the error code interrupts */
+	if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
+		/*
+		 * Overrun interrupt - bail out since our Data has been
+		 * corrupted
+		 */
+		dev_err(&pl022->adev->dev,
+			"FIFO overrun\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
+			dev_err(&pl022->adev->dev,
+				"RXFIFO is full\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+			dev_err(&pl022->adev->dev,
+				"TXFIFO is full\n");
+
+		/*
+		 * Disable and clear interrupts, disable SSP,
+		 * mark message with bad status so it can be
+		 * retried.
+		 */
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		writew((readw(SSP_CR1(pl022->virtbase)) &
+			(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+		msg->state = STATE_ERROR;
+
+		/* Schedule message queue handler */
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	readwriter(pl022);
+
+	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
+		flag = 1;
+		/* Disable Transmit interrupt */
+		writew(readw(SSP_IMSC(pl022->virtbase)) &
+		       (~SSP_IMSC_MASK_TXIM),
+		       SSP_IMSC(pl022->virtbase));
+	}
+
+	/*
+	 * Since all transactions must write as much as shall be read,
+	 * we can conclude the entire transaction once RX is complete.
+	 * At this point, all TX will always be finished.
+	 */
+	if (pl022->rx >= pl022->rx_end) {
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		if (unlikely(pl022->rx > pl022->rx_end)) {
+			dev_warn(&pl022->adev->dev, "read %u surplus "
+				 "bytes (did you request an odd "
+				 "number of bytes on a 16bit bus?)\n",
+				 (u32) (pl022->rx - pl022->rx_end));
+		}
+		/* Update total bytes transfered */
+		msg->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->
+				cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		msg->state = next_transfer(pl022);
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * This sets up the pointers to memory for the next message to
+ * send out on the SPI bus.
+ */
+static int set_up_next_transfer(struct pl022 *pl022,
+				struct spi_transfer *transfer)
+{
+	int residue;
+
+	/* Sanity check the message for this bus width */
+	residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
+	if (unlikely(residue != 0)) {
+		dev_err(&pl022->adev->dev,
+			"message of %u bytes to transmit but the current "
+			"chip bus has a data width of %u bytes!\n",
+			pl022->cur_transfer->len,
+			pl022->cur_chip->n_bytes);
+		dev_err(&pl022->adev->dev, "skipping this message\n");
+		return -EIO;
+	}
+	pl022->tx = (void *)transfer->tx_buf;
+	pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
+	pl022->rx = (void *)transfer->rx_buf;
+	pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
+	pl022->write =
+	    pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
+	pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
+	return 0;
+}
+
+/**
+ * pump_transfers - Tasklet function which schedules next interrupt transfer
+ * when running in interrupt transfer mode.
+ * @data: SSP driver private data structure
+ *
+ */
+static void pump_transfers(unsigned long data)
+{
+	struct pl022 *pl022 = (struct pl022 *) data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+
+	/* Get current state information */
+	message = pl022->cur_msg;
+	transfer = pl022->cur_transfer;
+
+	/* Handle for abort */
+	if (message->state == STATE_ERROR) {
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE) {
+		message->status = 0;
+		giveback(pl022);
+		return;
+	}
+
+	/* Delay if requested at end of transfer before CS change */
+	if (message->state == STATE_RUNNING) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			/*
+			 * FIXME: This runs in interrupt context.
+			 * Is this really smart?
+			 */
+			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	} else {
+		/* STATE_START */
+		message->state = STATE_RUNNING;
+	}
+
+	if (set_up_next_transfer(pl022, transfer)) {
+		message->state = STATE_ERROR;
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Flush the FIFOs and let's go! */
+	flush(pl022);
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+/**
+ * NOT IMPLEMENTED
+ * configure_dma - It configures the DMA pipes for DMA transfers
+ * @data: SSP driver's private data structure
+ *
+ */
+static int configure_dma(void *data)
+{
+	struct pl022 *pl022 = data;
+	dev_dbg(&pl022->adev->dev, "configure DMA\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * do_dma_transfer - It handles transfers of the current message
+ * if it is DMA xfer.
+ * NOT FULLY IMPLEMENTED
+ * @data: SSP driver's private data structure
+ */
+static void do_dma_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	if (configure_dma(data)) {
+		dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
+		goto err_config_dma;
+	}
+
+	/* TODO: Implememt DMA setup of pipes here */
+
+	/* Enable target chip, set up transfer */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+
+	/* TODO: Enable the DMA transfer here */
+	return;
+
+ err_config_dma:
+	pl022->cur_msg->state = STATE_ERROR;
+	pl022->cur_msg->status = -EIO;
+	giveback(pl022);
+	return;
+}
+
+static void do_interrupt_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	/* Enable target chip */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP, turn on interrupts */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+static void do_polling_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip;
+
+	chip = pl022->cur_chip;
+	message = pl022->cur_msg;
+
+	while (message->state != STATE_DONE) {
+		/* Handle for abort */
+		if (message->state == STATE_ERROR)
+			break;
+		transfer = pl022->cur_transfer;
+
+		/* Delay if requested at end of transfer */
+		if (message->state == STATE_RUNNING) {
+			previous =
+			    list_entry(transfer->transfer_list.prev,
+				       struct spi_transfer, transfer_list);
+			if (previous->delay_usecs)
+				udelay(previous->delay_usecs);
+			if (previous->cs_change)
+				pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		} else {
+			/* STATE_START */
+			message->state = STATE_RUNNING;
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		}
+
+		/* Configuration Changing Per Transfer */
+		if (set_up_next_transfer(pl022, transfer)) {
+			/* Error path */
+			message->state = STATE_ERROR;
+			break;
+		}
+		/* Flush FIFOs and enable SSP */
+		flush(pl022);
+		writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+		       SSP_CR1(pl022->virtbase));
+
+		dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
+		/* FIXME: insert a timeout so we don't hang here indefinately */
+		while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
+			readwriter(pl022);
+
+		/* Update total byte transfered */
+		message->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		message->state = next_transfer(pl022);
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE)
+		message->status = 0;
+	else
+		message->status = -EIO;
+
+	giveback(pl022);
+	return;
+}
+
+/**
+ * pump_messages - Workqueue function which processes spi message queue
+ * @data: pointer to private data of SSP driver
+ *
+ * This function checks if there is any spi message in the queue that
+ * needs processing and delegate control to appropriate function
+ * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
+ * based on the kind of the transfer
+ *
+ */
+static void pump_messages(struct work_struct *work)
+{
+	struct pl022 *pl022 =
+		container_of(work, struct pl022, pump_messages);
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
+		pl022->busy = 0;
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Make sure we are not already running a message */
+	if (pl022->cur_msg) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Extract head of queue */
+	pl022->cur_msg =
+	    list_entry(pl022->queue.next, struct spi_message, queue);
+
+	list_del_init(&pl022->cur_msg->queue);
+	pl022->busy = 1;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	/* Initial message state */
+	pl022->cur_msg->state = STATE_START;
+	pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
+					    struct spi_transfer,
+					    transfer_list);
+
+	/* Setup the SPI using the per chip configuration */
+	pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
+	/*
+	 * We enable the clock here, then the clock will be disabled when
+	 * giveback() is called in each method (poll/interrupt/DMA)
+	 */
+	clk_enable(pl022->clk);
+	restore_state(pl022);
+	flush(pl022);
+
+	if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
+		do_polling_transfer(pl022);
+	else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
+		do_interrupt_transfer(pl022);
+	else
+		do_dma_transfer(pl022);
+}
+
+
+static int __init init_queue(struct pl022 *pl022)
+{
+	INIT_LIST_HEAD(&pl022->queue);
+	spin_lock_init(&pl022->queue_lock);
+
+	pl022->run = QUEUE_STOPPED;
+	pl022->busy = 0;
+
+	tasklet_init(&pl022->pump_transfers,
+			pump_transfers,	(unsigned long)pl022);
+
+	INIT_WORK(&pl022->pump_messages, pump_messages);
+	pl022->workqueue = create_singlethread_workqueue(
+					dev_name(pl022->master->dev.parent));
+	if (pl022->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+
+static int start_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -EBUSY;
+	}
+
+	pl022->run = QUEUE_RUNNING;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	return 0;
+}
+
+
+static int stop_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the pl022->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	pl022->run = QUEUE_STOPPED;
+	while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+	}
+
+	if (!list_empty(&pl022->queue) || pl022->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct pl022 *pl022)
+{
+	int status;
+
+	status = stop_queue(pl022);
+	/* we are unloading the module or failing to load (only two calls
+	 * to this routine), and neither call can handle a return value.
+	 * However, destroy_workqueue calls flush_workqueue, and that will
+	 * block until all work is done.  If the reason that stop_queue
+	 * timed out is that the work will never finish, then it does no
+	 * good to call destroy_workqueue, so return anyway. */
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(pl022->workqueue);
+
+	return 0;
+}
+
+static int verify_controller_parameters(struct pl022 *pl022,
+					struct pl022_config_chip *chip_info)
+{
+	if ((chip_info->lbm != LOOPBACK_ENABLED)
+	    && (chip_info->lbm != LOOPBACK_DISABLED)) {
+		dev_err(chip_info->dev,
+			"loopback Mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
+	    || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
+		dev_err(chip_info->dev,
+			"interface is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
+	    (!pl022->vendor->unidir)) {
+		dev_err(chip_info->dev,
+			"unidirectional mode not supported in this "
+			"hardware version\n");
+		return -EINVAL;
+	}
+	if ((chip_info->hierarchy != SSP_MASTER)
+	    && (chip_info->hierarchy != SSP_SLAVE)) {
+		dev_err(chip_info->dev,
+			"hierarchy is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
+	    || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
+		dev_err(chip_info->dev,
+			"cpsdvsr is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_rx != SSP_RX_MSB)
+	    && (chip_info->endian_rx != SSP_RX_LSB)) {
+		dev_err(chip_info->dev,
+			"RX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_tx != SSP_TX_MSB)
+	    && (chip_info->endian_tx != SSP_TX_LSB)) {
+		dev_err(chip_info->dev,
+			"TX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->data_size < SSP_DATA_BITS_4)
+	    || (chip_info->data_size > SSP_DATA_BITS_32)) {
+		dev_err(chip_info->dev,
+			"DATA Size is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->com_mode != INTERRUPT_TRANSFER)
+	    && (chip_info->com_mode != DMA_TRANSFER)
+	    && (chip_info->com_mode != POLLING_TRANSFER)) {
+		dev_err(chip_info->dev,
+			"Communication mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
+	    || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
+		dev_err(chip_info->dev,
+			"RX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
+	    || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
+		dev_err(chip_info->dev,
+			"TX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
+		if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
+		    && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+			dev_err(chip_info->dev,
+				"Clock Phase is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
+		    && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
+			dev_err(chip_info->dev,
+				"Clock Polarity is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
+		if ((chip_info->ctrl_len < SSP_BITS_4)
+		    || (chip_info->ctrl_len > SSP_BITS_32)) {
+			dev_err(chip_info->dev,
+				"CTRL LEN is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
+		    && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
+			dev_err(chip_info->dev,
+				"Wait State is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+		    && (chip_info->duplex !=
+			SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
+			dev_err(chip_info->dev,
+				"DUPLEX is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->cs_control == NULL) {
+		dev_warn(chip_info->dev,
+			"Chip Select Function is NULL for this chip\n");
+		chip_info->cs_control = null_cs_control;
+	}
+	return 0;
+}
+
+/**
+ * pl022_transfer - transfer function registered to SPI master framework
+ * @spi: spi device which is requesting transfer
+ * @msg: spi message which is to handled is queued to driver queue
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will queue the spi_message in the queue of driver if
+ * the queue is not stopped and return.
+ */
+static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -ESHUTDOWN;
+	}
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = STATE_START;
+
+	list_add_tail(&msg->queue, &pl022->queue);
+	if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+		queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+	return 0;
+}
+
+static int calculate_effective_freq(struct pl022 *pl022,
+				    int freq,
+				    struct ssp_clock_params *clk_freq)
+{
+	/* Lets calculate the frequency parameters */
+	u16 cpsdvsr = 2;
+	u16 scr = 0;
+	bool freq_found = false;
+	u32 rate;
+	u32 max_tclk;
+	u32 min_tclk;
+
+	rate = clk_get_rate(pl022->clk);
+	/* cpsdvscr = 2 & scr 0 */
+	max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+	/* cpsdvsr = 254 & scr = 255 */
+	min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+
+	if ((freq <= max_tclk) && (freq >= min_tclk)) {
+		while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
+			while (scr <= SCR_MAX && !freq_found) {
+				if ((rate /
+				     (cpsdvsr * (1 + scr))) > freq)
+					scr += 1;
+				else {
+					/*
+					 * This bool is made true when
+					 * effective frequency >=
+					 * target frequency is found
+					 */
+					freq_found = true;
+					if ((rate /
+					     (cpsdvsr * (1 + scr))) != freq) {
+						if (scr == SCR_MIN) {
+							cpsdvsr -= 2;
+							scr = SCR_MAX;
+						} else
+							scr -= 1;
+					}
+				}
+			}
+			if (!freq_found) {
+				cpsdvsr += 2;
+				scr = SCR_MIN;
+			}
+		}
+		if (cpsdvsr != 0) {
+			dev_dbg(&pl022->adev->dev,
+				"SSP Effective Frequency is %u\n",
+				(rate / (cpsdvsr * (1 + scr))));
+			clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
+			clk_freq->scr = (u8) (scr & 0xFF);
+			dev_dbg(&pl022->adev->dev,
+				"SSP cpsdvsr = %d, scr = %d\n",
+				clk_freq->cpsdvsr, clk_freq->scr);
+		}
+	} else {
+		dev_err(&pl022->adev->dev,
+			"controller data is incorrect: out of range frequency");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * NOT IMPLEMENTED
+ * process_dma_info - Processes the DMA info provided by client drivers
+ * @chip_info: chip info provided by client device
+ * @chip: Runtime state maintained by the SSP controller for each spi device
+ *
+ * This function processes and stores DMA config provided by client driver
+ * into the runtime state maintained by the SSP controller driver
+ */
+static int process_dma_info(struct pl022_config_chip *chip_info,
+			    struct chip_data *chip)
+{
+	dev_err(chip_info->dev,
+		"cannot process DMA info, DMA not implemented!\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * pl022_setup - setup function registered to SPI master framework
+ * @spi: spi device which is requesting setup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. If it is the first time when setup is called by this device,
+ * this function will initialize the runtime state for this chip and save
+ * the same in the device structure. Else it will update the runtime info
+ * with the updated chip info. Nothing is really being written to the
+ * controller hardware here, that is not done until the actual transfer
+ * commence.
+ */
+
+/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
+#define MODEBITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+			| SPI_LSB_FIRST | SPI_LOOP)
+
+static int pl022_setup(struct spi_device *spi)
+{
+	struct pl022_config_chip *chip_info;
+	struct chip_data *chip;
+	int status = 0;
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+
+	if (spi->mode & ~MODEBITS) {
+		dev_dbg(&spi->dev, "unsupported mode bits %x\n",
+			spi->mode & ~MODEBITS);
+		return -EINVAL;
+	}
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	/* Get controller_state if one is supplied */
+	chip = spi_get_ctldata(spi);
+
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip) {
+			dev_err(&spi->dev,
+				"cannot allocate controller state\n");
+			return -ENOMEM;
+		}
+		dev_dbg(&spi->dev,
+			"allocated memory for controller's runtime state\n");
+	}
+
+	/* Get controller data if one is supplied */
+	chip_info = spi->controller_data;
+
+	if (chip_info == NULL) {
+		/* spi_board_info.controller_data not is supplied */
+		dev_dbg(&spi->dev,
+			"using default controller_data settings\n");
+
+		chip_info =
+			kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
+
+		if (!chip_info) {
+			dev_err(&spi->dev,
+				"cannot allocate controller data\n");
+			status = -ENOMEM;
+			goto err_first_setup;
+		}
+
+		dev_dbg(&spi->dev, "allocated memory for controller data\n");
+
+		/* Pointer back to the SPI device */
+		chip_info->dev = &spi->dev;
+		/*
+		 * Set controller data default values:
+		 * Polling is supported by default
+		 */
+		chip_info->lbm = LOOPBACK_DISABLED;
+		chip_info->com_mode = POLLING_TRANSFER;
+		chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
+		chip_info->hierarchy = SSP_SLAVE;
+		chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
+		chip_info->endian_tx = SSP_TX_LSB;
+		chip_info->endian_rx = SSP_RX_LSB;
+		chip_info->data_size = SSP_DATA_BITS_12;
+		chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
+		chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
+		chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+		chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
+		chip_info->ctrl_len = SSP_BITS_8;
+		chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
+		chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
+		chip_info->cs_control = null_cs_control;
+	} else {
+		dev_dbg(&spi->dev,
+			"using user supplied controller_data settings\n");
+	}
+
+	/*
+	 * We can override with custom divisors, else we use the board
+	 * frequency setting
+	 */
+	if ((0 == chip_info->clk_freq.cpsdvsr)
+	    && (0 == chip_info->clk_freq.scr)) {
+		status = calculate_effective_freq(pl022,
+						  spi->max_speed_hz,
+						  &chip_info->clk_freq);
+		if (status < 0)
+			goto err_config_params;
+	} else {
+		if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
+			chip_info->clk_freq.cpsdvsr =
+				chip_info->clk_freq.cpsdvsr - 1;
+	}
+	status = verify_controller_parameters(pl022, chip_info);
+	if (status) {
+		dev_err(&spi->dev, "controller data is incorrect");
+		goto err_config_params;
+	}
+	/* Now set controller state based on controller data */
+	chip->xfer_type = chip_info->com_mode;
+	chip->cs_control = chip_info->cs_control;
+
+	if (chip_info->data_size <= 8) {
+		dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
+		chip->n_bytes = 1;
+		chip->read = READING_U8;
+		chip->write = WRITING_U8;
+	} else if (chip_info->data_size <= 16) {
+		dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
+		chip->n_bytes = 2;
+		chip->read = READING_U16;
+		chip->write = WRITING_U16;
+	} else {
+		if (pl022->vendor->max_bpw >= 32) {
+			dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+			chip->n_bytes = 4;
+			chip->read = READING_U32;
+			chip->write = WRITING_U32;
+		} else {
+			dev_err(&spi->dev,
+				"illegal data size for this controller!\n");
+			dev_err(&spi->dev,
+				"a standard pl022 can only handle "
+				"1 <= n <= 16 bit words\n");
+			goto err_config_params;
+		}
+	}
+
+	/* Now Initialize all register settings required for this chip */
+	chip->cr0 = 0;
+	chip->cr1 = 0;
+	chip->dmacr = 0;
+	chip->cpsr = 0;
+	if ((chip_info->com_mode == DMA_TRANSFER)
+	    && ((pl022->master_info)->enable_dma)) {
+		chip->enable_dma = 1;
+		dev_dbg(&spi->dev, "DMA mode set in controller state\n");
+		status = process_dma_info(chip_info, chip);
+		if (status < 0)
+			goto err_config_params;
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	} else {
+		chip->enable_dma = 0;
+		dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	}
+
+	chip->cpsr = chip_info->clk_freq.cpsdvsr;
+
+	SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
+	SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
+	SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
+	SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
+	SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
+	SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
+	SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
+	SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
+	SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
+	SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
+	SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
+
+	/* Save controller_state */
+	spi_set_ctldata(spi, chip);
+	return status;
+ err_config_params:
+ err_first_setup:
+	kfree(chip);
+	return status;
+}
+
+/**
+ * pl022_cleanup - cleanup function registered to SPI master framework
+ * @spi: spi device which is requesting cleanup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will free the runtime state of chip.
+ */
+static void pl022_cleanup(struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata(spi);
+
+	spi_set_ctldata(spi, NULL);
+	kfree(chip);
+}
+
+
+static int __init
+pl022_probe(struct amba_device *adev, struct amba_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
+	struct spi_master *master;
+	struct pl022 *pl022 = NULL;	/*Data for this driver */
+	int status = 0;
+
+	dev_info(&adev->dev,
+		 "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
+	if (platform_info == NULL) {
+		dev_err(&adev->dev, "probe - no platform data supplied\n");
+		status = -ENODEV;
+		goto err_no_pdata;
+	}
+
+	/* Allocate master with space for data */
+	master = spi_alloc_master(dev, sizeof(struct pl022));
+	if (master == NULL) {
+		dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
+		status = -ENOMEM;
+		goto err_no_master;
+	}
+
+	pl022 = spi_master_get_devdata(master);
+	pl022->master = master;
+	pl022->master_info = platform_info;
+	pl022->adev = adev;
+	pl022->vendor = id->data;
+
+	/*
+	 * Bus Number Which has been Assigned to this SSP controller
+	 * on this board
+	 */
+	master->bus_num = platform_info->bus_id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = pl022_cleanup;
+	master->setup = pl022_setup;
+	master->transfer = pl022_transfer;
+
+	dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
+
+	status = amba_request_regions(adev, NULL);
+	if (status)
+		goto err_no_ioregion;
+
+	pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+	if (pl022->virtbase == NULL) {
+		status = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
+	       adev->res.start, pl022->virtbase);
+
+	pl022->clk = clk_get(&adev->dev, NULL);
+	if (IS_ERR(pl022->clk)) {
+		status = PTR_ERR(pl022->clk);
+		dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
+		goto err_no_clk;
+	}
+
+	/* Disable SSP */
+	clk_enable(pl022->clk);
+	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
+	       SSP_CR1(pl022->virtbase));
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+
+	status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
+			     pl022);
+	if (status < 0) {
+		dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
+		goto err_no_irq;
+	}
+	/* Initialize and start queue */
+	status = init_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem initializing queue\n");
+		goto err_init_queue;
+	}
+	status = start_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem starting queue\n");
+		goto err_start_queue;
+	}
+	/* Register with the SPI framework */
+	amba_set_drvdata(adev, pl022);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"probe - problem registering spi master\n");
+		goto err_spi_register;
+	}
+	dev_dbg(dev, "probe succeded\n");
+	return 0;
+
+ err_spi_register:
+ err_start_queue:
+ err_init_queue:
+	destroy_queue(pl022);
+	free_irq(adev->irq[0], pl022);
+ err_no_irq:
+	clk_put(pl022->clk);
+ err_no_clk:
+	iounmap(pl022->virtbase);
+ err_no_ioremap:
+	amba_release_regions(adev);
+ err_no_ioregion:
+	spi_master_put(master);
+ err_no_master:
+ err_no_pdata:
+	return status;
+}
+
+static int __exit
+pl022_remove(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+	if (!pl022)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"queue remove failed (%d)\n", status);
+		return status;
+	}
+	load_ssp_default_config(pl022);
+	free_irq(adev->irq[0], pl022);
+	clk_disable(pl022->clk);
+	clk_put(pl022->clk);
+	iounmap(pl022->virtbase);
+	amba_release_regions(adev);
+	tasklet_disable(&pl022->pump_transfers);
+	spi_unregister_master(pl022->master);
+	spi_master_put(pl022->master);
+	amba_set_drvdata(adev, NULL);
+	dev_dbg(&adev->dev, "remove succeded\n");
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	status = stop_queue(pl022);
+	if (status) {
+		dev_warn(&adev->dev, "suspend cannot stop queue\n");
+		return status;
+	}
+
+	clk_enable(pl022->clk);
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+	dev_dbg(&adev->dev, "suspended\n");
+	return 0;
+}
+
+static int pl022_resume(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	/* Start the queue running */
+	status = start_queue(pl022);
+	if (status)
+		dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+	else
+		dev_dbg(&adev->dev, "resumed\n");
+
+	return status;
+}
+#else
+#define pl022_suspend NULL
+#define pl022_resume NULL
+#endif	/* CONFIG_PM */
+
+static struct vendor_data vendor_arm = {
+	.fifodepth = 8,
+	.max_bpw = 16,
+	.unidir = false,
+};
+
+
+static struct vendor_data vendor_st = {
+	.fifodepth = 32,
+	.max_bpw = 32,
+	.unidir = false,
+};
+
+static struct amba_id pl022_ids[] = {
+	{
+		/*
+		 * ARM PL022 variant, this has a 16bit wide
+		 * and 8 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00041022,
+		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		/*
+		 * ST Micro derivative, this has 32bit wide
+		 * and 32 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00108022,
+		.mask	= 0xffffffff,
+		.data	= &vendor_st,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl022_driver = {
+	.drv = {
+		.name	= "ssp-pl022",
+	},
+	.id_table	= pl022_ids,
+	.probe		= pl022_probe,
+	.remove		= __exit_p(pl022_remove),
+	.suspend        = pl022_suspend,
+	.resume         = pl022_resume,
+};
+
+
+static int __init pl022_init(void)
+{
+	return amba_driver_register(&pl022_driver);
+}
+
+module_init(pl022_init);
+
+static void __exit pl022_exit(void)
+{
+	amba_driver_unregister(&pl022_driver);
+}
+
+module_exit(pl022_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index f014cc21e81..011c5bddba6 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -803,7 +803,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 				drv_data->rx, drv_data->len_in_bytes);
 
 			/* invalidate caches, if needed */
-			if (bfin_addr_dcachable((unsigned long) drv_data->rx))
+			if (bfin_addr_dcacheable((unsigned long) drv_data->rx))
 				invalidate_dcache_range((unsigned long) drv_data->rx,
 							(unsigned long) (drv_data->rx +
 							drv_data->len_in_bytes));
@@ -816,7 +816,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 			dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
 
 			/* flush caches, if needed */
-			if (bfin_addr_dcachable((unsigned long) drv_data->tx))
+			if (bfin_addr_dcacheable((unsigned long) drv_data->tx))
 				flush_dcache_range((unsigned long) drv_data->tx,
 						(unsigned long) (drv_data->tx +
 						drv_data->len_in_bytes));
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5476b..bbf9371cd28 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/drivers/staging/agnx/pci.c b/drivers/staging/agnx/pci.c
index 25c0ffd2faa..43b3fe35261 100644
--- a/drivers/staging/agnx/pci.c
+++ b/drivers/staging/agnx/pci.c
@@ -303,14 +303,18 @@ static int agnx_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int agnx_config_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_vif *vif,
-				 struct ieee80211_if_conf *conf)
+static void agnx_bss_info_changed(struct ieee80211_hw *dev,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_bss_conf *conf,
+				  u32 changed)
 {
 	struct agnx_priv *priv = dev->priv;
 	void __iomem *ctl = priv->ctl;
 	AGNX_TRACE;
 
+	if (!(changed & BSS_CHANGED_BSSID))
+		return;
+
 	spin_lock(&priv->lock);
 
 	if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
@@ -323,8 +327,7 @@ static int agnx_config_interface(struct ieee80211_hw *dev,
 		agnx_write32(ctl, AGNX_BM_MTSM, 0xff & ~0x1);
 	}
 	spin_unlock(&priv->lock);
-	return 0;
-} /* agnx_config_interface */
+} /* agnx_bss_info_changed */
 
 
 static void agnx_configure_filter(struct ieee80211_hw *dev,
@@ -422,7 +425,7 @@ static struct ieee80211_ops agnx_ops = {
 	.add_interface		= agnx_add_interface,
 	.remove_interface	= agnx_remove_interface,
 	.config			= agnx_config,
-	.config_interface	= agnx_config_interface,
+	.bss_info_changed	= agnx_bss_info_changed,
 	.configure_filter	= agnx_configure_filter,
 	.get_stats		= agnx_get_stats,
 	.get_tx_stats		= agnx_get_tx_stats,
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index c8af9a868d6..3f303ae97b4 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -3242,12 +3242,11 @@ static int at76_tx(struct sk_buff *skb, struct net_device *netdev)
 			       "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
 			       priv->netdev->name, priv->tx_urb,
 			       priv->tx_urb->hcpriv, priv->tx_urb->complete);
-	} else {
+	} else
 		stats->tx_bytes += skb->len;
-		dev_kfree_skb(skb);
-	}
 
-	return ret;
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 static void at76_tx_timeout(struct net_device *netdev)
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 951c73d5db2..59e99cc7786 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -585,11 +585,11 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
 			 * available
 			 */
 			netif_stop_queue(netdev);
-			status = 1;
+			status = NETDEV_TX_BUSY;
 		} else {
 			DBG_WARNING(et131x_dbginfo,
 				    "Misc error; drop packet\n");
-			status = 0;
+			status = NETDEV_TX_OK;
 		}
 	}
 
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt
index 9f6772bc68c..1c2907c1dc8 100644
--- a/drivers/staging/go7007/go7007.txt
+++ b/drivers/staging/go7007/go7007.txt
@@ -2,7 +2,7 @@ This is a driver for the WIS GO7007SB multi-format video encoder.
 
 Pete Eberlein <pete@sensoray.com>
 
-The driver was orignally released under the GPL and is currently hosted at:
+The driver was originally released under the GPL and is currently hosted at:
 http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
 The go7007 firmware can be acquired from the package on the site above.
 
@@ -24,7 +24,7 @@ These should be used instead of the non-standard GO7007 ioctls described
 below.
 
 
-The README files from the orignal package appear below:
+The README files from the original package appears below:
 
 ---------------------------------------------------------------------------
                      WIS GO7007SB Public Linux Driver
diff --git a/drivers/staging/panel/lcd-panel-cgram.txt b/drivers/staging/panel/lcd-panel-cgram.txt
index f9ceef4322a..7f82c905763 100644
--- a/drivers/staging/panel/lcd-panel-cgram.txt
+++ b/drivers/staging/panel/lcd-panel-cgram.txt
@@ -3,7 +3,7 @@ characters 0 to 7. The escape code to define a new character is
 '\e[LG' followed by one digit from 0 to 7, representing the character
 number, and up to 8 couples of hex digits terminated by a semi-colon
 (';'). Each couple of digits represents a line, with 1-bits for each
-illuminated pixel with LSB on the right. Lines are numberred from the
+illuminated pixel with LSB on the right. Lines are numbered from the
 top of the character to the bottom. On a 5x7 matrix, only the 5 lower
 bits of the 7 first bytes are used for each character. If the string
 is incomplete, only complete lines will be redefined. Here are some
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index c00f9ab9c46..2edf2999f5c 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -5664,7 +5664,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index 8a82cee8bf2..a26bc033337 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -5561,7 +5561,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 0ffbfa36699..0189bab013c 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -5575,7 +5575,7 @@ VOID 	AsicUpdateProtect(
 	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
 	MacReg &= 0xFF0000FF;
 
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
     if ((
 #ifdef DOT11_N_SUPPORT
 		(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
index 33a0687252a..1294e05fcf1 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -814,7 +814,7 @@ int ieee80211_xmit(struct sk_buff *skb,
 	spin_unlock_irqrestore(&ieee->lock, flags);
 	netif_stop_queue(dev);
 	stats->tx_errors++;
-	return 1;
+	return NETDEV_TX_BUSY;
 
 }
 
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 888198c9a10..824e65bdc43 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -2424,7 +2424,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 *	0		success
 *	>0		f/w reported error - f/w status code
 *	<0		driver reported error
-*	-ETIMEOUT	timout waiting for the cmd regs to become
+*	-ETIMEDOUT	timout waiting for the cmd regs to become
 *			available, or waiting for the control reg
 *			to indicate the Aux port is enabled.
 *	-ENODATA	the buffer does NOT contain a valid PDA.
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index 393e4df70df..bc0d764d851 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -432,21 +432,21 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
 		/* success and more buf */
 		/* avail, re: hw_txdata */
 		netif_wake_queue(wlandev->netdev);
-		result = 0;
+		result = NETDEV_TX_OK;
 	} else if (txresult == 1) {
 		/* success, no more avail */
 		pr_debug("txframe success, no more bufs\n");
 		/* netdev->tbusy = 1;  don't set here, irqhdlr */
 		/*   may have already cleared it */
-		result = 0;
+		result = NETDEV_TX_OK;
 	} else if (txresult == 2) {
 		/* alloc failure, drop frame */
 		pr_debug("txframe returned alloc_fail\n");
-		result = 1;
+		result = NETDEV_TX_BUSY;
 	} else {
 		/* buffer full or queue busy, drop frame. */
 		pr_debug("txframe returned full or busy\n");
-		result = 1;
+		result = NETDEV_TX_BUSY;
 	}
 
 failed:
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index c6c816b7ecb..5eee3f82be5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
 	default y if SUPERH				# r8a66597-hcd
+	default y if MICROBLAZE
 	default PCI
 
 # many non-PCI SOC chips embed OHCI
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index dff5760a37f..ffe75e83787 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,6 +39,7 @@
 #include <linux/parser.h>
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <asm/byteorder.h>
 #include "usb.h"
 #include "hcd.h"
@@ -265,9 +266,13 @@ static int remount(struct super_block *sb, int *flags, char *data)
 		return -EINVAL;
 	}
 
+	lock_kernel();
+
 	if (usbfs_mount && usbfs_mount->mnt_sb)
 		update_sb(usbfs_mount->mnt_sb);
 
+	unlock_kernel();
+
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index c1abeb89b41..96fb118355b 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -188,8 +188,7 @@ static struct usb_descriptor_header *hs_pn_function[] = {
 
 static int pn_net_open(struct net_device *dev)
 {
-	if (netif_carrier_ok(dev))
-		netif_wake_queue(dev);
+	netif_wake_queue(dev);
 	return 0;
 }
 
@@ -219,8 +218,7 @@ static void pn_tx_complete(struct usb_ep *ep, struct usb_request *req)
 	}
 
 	dev_kfree_skb_any(skb);
-	if (netif_carrier_ok(dev))
-		netif_wake_queue(dev);
+	netif_wake_queue(dev);
 }
 
 static int pn_net_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -255,7 +253,7 @@ out_unlock:
 	spin_unlock_irqrestore(&port->lock, flags);
 out:
 	if (unlikely(skb)) {
-		dev_kfree_skb_any(skb);
+		dev_kfree_skb(skb);
 		dev->stats.tx_dropped++;
 	}
 	return 0;
@@ -383,7 +381,6 @@ static void __pn_reset(struct usb_function *f)
 	struct phonet_port *port = netdev_priv(dev);
 
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 	port->usb = NULL;
 
 	usb_ep_disable(fp->out_ep);
@@ -427,8 +424,6 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			fp->in_ep->driver_data = fp;
 
 			netif_carrier_on(dev);
-			if (netif_running(dev))
-				netif_wake_queue(dev);
 			for (i = 0; i < phonet_rxq_size; i++)
 				pn_rx_submit(fp, fp->out_reqv[i], GFP_ATOMIC);
 		}
@@ -574,9 +569,10 @@ static struct net_device *dev;
 int __init phonet_bind_config(struct usb_configuration *c)
 {
 	struct f_phonet *fp;
-	int err;
+	int err, size;
 
-	fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+	size = sizeof(*fp) + (phonet_rxq_size * sizeof(struct usb_request *));
+	fp = kzalloc(size, GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
 
@@ -601,16 +597,13 @@ int __init gphonet_setup(struct usb_gadget *gadget)
 
 	/* Create net device */
 	BUG_ON(dev);
-	dev = alloc_netdev(sizeof(*port)
-		+ (phonet_rxq_size * sizeof(struct usb_request *)),
-				"upnlink%d", pn_net_setup);
+	dev = alloc_netdev(sizeof(*port), "upnlink%d", pn_net_setup);
 	if (!dev)
 		return -ENOMEM;
 
 	port = netdev_priv(dev);
 	spin_lock_init(&port->lock);
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 	SET_NETDEV_DEV(dev, &gadget->dev);
 
 	err = register_netdev(dev);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 4007770f7ed..016f63b3902 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -520,7 +520,7 @@ static int eth_start_xmit(struct sk_buff *skb, struct net_device *net)
 	 */
 	if (list_empty(&dev->tx_reqs)) {
 		spin_unlock_irqrestore(&dev->req_lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	req = container_of(dev->tx_reqs.next, struct usb_request, list);
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 1ba9f9a8c30..bb870b8f81b 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -162,7 +162,7 @@ static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
 	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
 		(unsigned long)virq);
 
-	ps3_system_bus_set_driver_data(dev, hcd);
+	ps3_system_bus_set_drvdata(dev, hcd);
 
 	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
 
@@ -195,8 +195,7 @@ fail_start:
 static int ps3_ehci_remove(struct ps3_system_bus_device *dev)
 {
 	unsigned int tmp;
-	struct usb_hcd *hcd =
-		(struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+	struct usb_hcd *hcd = ps3_system_bus_get_drvdata(dev);
 
 	BUG_ON(!hcd);
 
@@ -208,7 +207,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev)
 	ehci_shutdown(hcd);
 	usb_remove_hcd(hcd);
 
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 
 	BUG_ON(!hcd->regs);
 	iounmap(hcd->regs);
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 7cf74f8c2db..b0dbf4157d2 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 	struct usb_hcd *hcd;
 
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		dbg("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
 	}
 
@@ -65,12 +65,18 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (hcd->regs == NULL) {
-		pr_debug("ioremap failed");
+		dbg("ioremap failed");
 		retval = -ENOMEM;
 		goto err2;
 	}
 
-	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	usb_host_clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb_host_clock)) {
+		dbg("clk_get failed");
+		retval = PTR_ERR(usb_host_clock);
+		goto err3;
+	}
+
 	ep93xx_start_hc(&pdev->dev);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -80,6 +86,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 		return retval;
 
 	ep93xx_stop_hc(&pdev->dev);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 3d191031732..1d56259c5db 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -162,7 +162,7 @@ static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
 	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
 		(unsigned long)virq);
 
-	ps3_system_bus_set_driver_data(dev, hcd);
+	ps3_system_bus_set_drvdata(dev, hcd);
 
 	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
 
@@ -195,8 +195,7 @@ fail_start:
 static int ps3_ohci_remove(struct ps3_system_bus_device *dev)
 {
 	unsigned int tmp;
-	struct usb_hcd *hcd =
-		(struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+	struct usb_hcd *hcd = ps3_system_bus_get_drvdata(dev);
 
 	BUG_ON(!hcd);
 
@@ -208,7 +207,7 @@ static int ps3_ohci_remove(struct ps3_system_bus_device *dev)
 	ohci_shutdown(hcd);
 	usb_remove_hcd(hcd);
 
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 
 	BUG_ON(!hcd->regs);
 	iounmap(hcd->regs);
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index eabf20eeb37..db964db42d3 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -102,7 +102,7 @@ struct edgeport_port {
 	__u8 shadow_mcr;
 	__u8 shadow_lsr;
 	__u8 lsr_mask;
-	__u32 ump_read_timeout;		/* Number of miliseconds the UMP will
+	__u32 ump_read_timeout;		/* Number of milliseconds the UMP will
 					   wait without data before completing
 					   a read short */
 	int baud_rate;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0048f1185a6..2b5a691064b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_IMX || ARCH_MX2)
+	depends on FB && (ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1759,6 +1759,16 @@ config FB_68328
 	  Say Y here if you want to support the built-in frame buffer of
 	  the Motorola 68328 CPU family.
 
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
 config FB_PXA
 	tristate "PXA LCD framebuffer support"
 	depends on FB && ARCH_PXA
@@ -1996,7 +2006,7 @@ config FB_PS3_DEFAULT_SIZE_M
 
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
-	depends on FB && XILINX_VIRTEX
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index d8d0be5151e..01a819f4737 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE)              += gbefb.o
 obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
 obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
 obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
 obj-$(CONFIG_FB_W100)		  += w100fb.o
 obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
 obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index d1f80bac54f..fb8163d181a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -351,7 +351,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	}
 
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
-	fb->fb.fix.mmio_len	= 4096;
+	fb->fb.fix.mmio_len	= resource_size(&fb->dev->res);
 
 	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
 	if (!fb->regs) {
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 35e8eb02b9e..e4e4d433b00 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -354,7 +354,7 @@ static int default_crt_on __devinitdata = 0;
 static int default_lcd_on __devinitdata = 1;
 
 #ifdef CONFIG_MTRR
-static int mtrr = 1;
+static bool mtrr = true;
 #endif
 
 #ifdef CONFIG_PMAC_BACKLIGHT
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 1e35ba6f18e..b0b147cb4cb 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -111,9 +111,7 @@ struct bw2_par {
 	u32			flags;
 #define BW2_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 /**
@@ -167,17 +165,15 @@ static int bw2_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct bw2_par *par = (struct bw2_par *)info->par;
 
 	return sbusfb_mmap_helper(bw2_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io,
 				  vma);
 }
 
 static int bw2_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct bw2_par *par = (struct bw2_par *) info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUN2BW, 1, par->fbsize);
+				   FBTYPE_SUN2BW, 1, info->fix.smem_len);
 }
 
 /*
@@ -294,7 +290,7 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 1);
@@ -317,13 +313,13 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
 			goto out_unmap_regs;
 	}
 
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &bw2_ops;
 
 	info->screen_base = of_ioremap(&op->resource[0], 0,
-				       par->fbsize, "bw2 ram");
+				       info->fix.smem_len, "bw2 ram");
 	if (!info->screen_base)
 		goto out_unmap_regs;
 
@@ -338,12 +334,12 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
 	dev_set_drvdata(&op->dev, info);
 
 	printk(KERN_INFO "%s: bwtwo at %lx:%lx\n",
-	       dp->full_name, par->which_io, par->physbase);
+	       dp->full_name, par->which_io, info->fix.smem_start);
 
 	return 0;
 
 out_unmap_screen:
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 out_unmap_regs:
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
@@ -363,7 +359,7 @@ static int __devexit bw2_remove(struct of_device *op)
 	unregister_framebuffer(info);
 
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 	framebuffer_release(info);
 
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index a2d1882791a..fe45a3b8d0e 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -196,9 +196,7 @@ struct cg14_par {
 	u32			flags;
 #define CG14_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		iospace;
-	unsigned long		fbsize;
 
 	struct sbus_mmap_map	mmap_map[CG14_MMAP_ENTRIES];
 
@@ -271,7 +269,7 @@ static int cg14_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct cg14_par *par = (struct cg14_par *) info->par;
 
 	return sbusfb_mmap_helper(par->mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->iospace, vma);
 }
 
@@ -343,7 +341,8 @@ static int cg14_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 
 	default:
 		ret = sbusfb_ioctl_helper(cmd, arg, info,
-					  FBTYPE_MDICOLOR, 8, par->fbsize);
+					  FBTYPE_MDICOLOR, 8,
+					  info->fix.smem_len);
 		break;
 	};
 
@@ -462,7 +461,7 @@ static void cg14_unmap_regs(struct of_device *op, struct fb_info *info,
 			   par->cursor, sizeof(struct cg14_cursor));
 	if (info->screen_base)
 		of_iounmap(&op->resource[1],
-			   info->screen_base, par->fbsize);
+			   info->screen_base, info->fix.smem_len);
 }
 
 static int __devinit cg14_probe(struct of_device *op, const struct of_device_id *match)
@@ -488,14 +487,14 @@ static int __devinit cg14_probe(struct of_device *op, const struct of_device_id
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	if (!strcmp(dp->parent->name, "sbus") ||
 	    !strcmp(dp->parent->name, "sbi")) {
-		par->physbase = op->resource[0].start;
+		info->fix.smem_start = op->resource[0].start;
 		par->iospace = op->resource[0].flags & IORESOURCE_BITS;
 	} else {
-		par->physbase = op->resource[1].start;
+		info->fix.smem_start = op->resource[1].start;
 		par->iospace = op->resource[0].flags & IORESOURCE_BITS;
 	}
 
@@ -507,7 +506,7 @@ static int __devinit cg14_probe(struct of_device *op, const struct of_device_id
 				 sizeof(struct cg14_cursor), "cg14 cursor");
 
 	info->screen_base = of_ioremap(&op->resource[1], 0,
-				       par->fbsize, "cg14 ram");
+				       info->fix.smem_len, "cg14 ram");
 
 	if (!par->regs || !par->clut || !par->cursor || !info->screen_base)
 		goto out_unmap_regs;
@@ -557,7 +556,7 @@ static int __devinit cg14_probe(struct of_device *op, const struct of_device_id
 
 	printk(KERN_INFO "%s: cgfourteen at %lx:%lx, %dMB\n",
 	       dp->full_name,
-	       par->iospace, par->physbase,
+	       par->iospace, info->fix.smem_start,
 	       par->ramsize >> 20);
 
 	return 0;
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index 99f87fb61d0..b2319fa7286 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -118,9 +118,7 @@ struct cg3_par {
 #define CG3_FLAG_BLANKED	0x00000001
 #define CG3_FLAG_RDI		0x00000002
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 /**
@@ -231,17 +229,15 @@ static int cg3_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct cg3_par *par = (struct cg3_par *)info->par;
 
 	return sbusfb_mmap_helper(cg3_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io,
 				  vma);
 }
 
 static int cg3_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct cg3_par *par = (struct cg3_par *) info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUN3COLOR, 8, par->fbsize);
+				   FBTYPE_SUN3COLOR, 8, info->fix.smem_len);
 }
 
 /*
@@ -368,7 +364,7 @@ static int __devinit cg3_probe(struct of_device *op,
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 8);
@@ -382,7 +378,7 @@ static int __devinit cg3_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->regs = of_ioremap(&op->resource[0], CG3_REGS_OFFSET,
 			       sizeof(struct cg3_regs), "cg3 regs");
@@ -392,7 +388,7 @@ static int __devinit cg3_probe(struct of_device *op,
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &cg3_ops;
 	info->screen_base = of_ioremap(&op->resource[0], CG3_RAM_OFFSET,
-				       par->fbsize, "cg3 ram");
+				       info->fix.smem_len, "cg3 ram");
 	if (!info->screen_base)
 		goto out_unmap_regs;
 
@@ -418,7 +414,7 @@ static int __devinit cg3_probe(struct of_device *op,
 	dev_set_drvdata(&op->dev, info);
 
 	printk(KERN_INFO "%s: cg3 at %lx:%lx\n",
-	       dp->full_name, par->which_io, par->physbase);
+	       dp->full_name, par->which_io, info->fix.smem_start);
 
 	return 0;
 
@@ -426,7 +422,7 @@ out_dealloc_cmap:
 	fb_dealloc_cmap(&info->cmap);
 
 out_unmap_screen:
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 out_unmap_regs:
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct cg3_regs));
@@ -447,7 +443,7 @@ static int __devexit cg3_remove(struct of_device *op)
 	fb_dealloc_cmap(&info->cmap);
 
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct cg3_regs));
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 	framebuffer_release(info);
 
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 940ec04f0f1..0d47c6030e3 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -263,9 +263,7 @@ struct cg6_par {
 	u32			flags;
 #define CG6_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 static int cg6_sync(struct fb_info *info)
@@ -596,16 +594,14 @@ static int cg6_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct cg6_par *par = (struct cg6_par *)info->par;
 
 	return sbusfb_mmap_helper(cg6_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
 static int cg6_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct cg6_par *par = (struct cg6_par *)info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUNFAST_COLOR, 8, par->fbsize);
+				   FBTYPE_SUNFAST_COLOR, 8, info->fix.smem_len);
 }
 
 /*
@@ -631,12 +627,12 @@ static void __devinit cg6_init_fix(struct fb_info *info, int linebytes)
 		break;
 	};
 	if (((conf >> CG6_FHC_REV_SHIFT) & CG6_FHC_REV_MASK) >= 11) {
-		if (par->fbsize <= 0x100000)
+		if (info->fix.smem_len <= 0x100000)
 			cg6_card_name = "TGX";
 		else
 			cg6_card_name = "TGX+";
 	} else {
-		if (par->fbsize <= 0x100000)
+		if (info->fix.smem_len <= 0x100000)
 			cg6_card_name = "GX";
 		else
 			cg6_card_name = "GX+";
@@ -738,7 +734,8 @@ static void cg6_unmap_regs(struct of_device *op, struct fb_info *info,
 		of_iounmap(&op->resource[0], par->fhc, sizeof(u32));
 
 	if (info->screen_base)
-		of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+		of_iounmap(&op->resource[0], info->screen_base,
+			   info->fix.smem_len);
 }
 
 static int __devinit cg6_probe(struct of_device *op,
@@ -759,7 +756,7 @@ static int __devinit cg6_probe(struct of_device *op,
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 8);
@@ -769,11 +766,11 @@ static int __devinit cg6_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	dblbuf = of_getintprop_default(dp, "dblbuf", 0);
 	if (dblbuf)
-		par->fbsize *= 4;
+		info->fix.smem_len *= 4;
 
 	par->fbc = of_ioremap(&op->resource[0], CG6_FBC_OFFSET,
 				4096, "cgsix fbc");
@@ -792,7 +789,7 @@ static int __devinit cg6_probe(struct of_device *op,
 	info->fbops = &cg6_ops;
 
 	info->screen_base = of_ioremap(&op->resource[0], CG6_RAM_OFFSET,
-					par->fbsize, "cgsix ram");
+					info->fix.smem_len, "cgsix ram");
 	if (!par->fbc || !par->tec || !par->thc ||
 	    !par->bt || !par->fhc || !info->screen_base)
 		goto out_unmap_regs;
@@ -817,7 +814,7 @@ static int __devinit cg6_probe(struct of_device *op,
 
 	printk(KERN_INFO "%s: CGsix [%s] at %lx:%lx\n",
 	       dp->full_name, info->fix.id,
-	       par->which_io, par->physbase);
+	       par->which_io, info->fix.smem_start);
 
 	return 0;
 
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 83c5cefc266..da7c01b39be 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1736,10 +1736,8 @@ static int __init cyber2000fb_init(void)
 
 #ifdef CONFIG_ARCH_SHARK
 	err = cyberpro_vl_probe();
-	if (!err) {
+	if (!err)
 		ret = 0;
-		__module_get(THIS_MODULE);
-	}
 #endif
 #ifdef CONFIG_PCI
 	err = pci_register_driver(&cyberpro_driver);
@@ -1749,14 +1747,15 @@ static int __init cyber2000fb_init(void)
 
 	return ret ? err : 0;
 }
+module_init(cyber2000fb_init);
 
+#ifndef CONFIG_ARCH_SHARK
 static void __exit cyberpro_exit(void)
 {
 	pci_unregister_driver(&cyberpro_driver);
 }
-
-module_init(cyber2000fb_init);
 module_exit(cyberpro_exit);
+#endif
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 7c7e8c2da9d..e145e2d16fe 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -191,9 +191,7 @@ struct leo_par {
 	u32			flags;
 #define LEO_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 static void leo_wait(struct leo_lx_krn __iomem *lx_krn)
@@ -420,16 +418,14 @@ static int leo_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct leo_par *par = (struct leo_par *)info->par;
 
 	return sbusfb_mmap_helper(leo_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
 static int leo_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct leo_par *par = (struct leo_par *) info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUNLEO, 32, par->fbsize);
+				   FBTYPE_SUNLEO, 32, info->fix.smem_len);
 }
 
 /*
@@ -569,7 +565,7 @@ static int __devinit leo_probe(struct of_device *op,
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 32);
@@ -577,7 +573,7 @@ static int __devinit leo_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->lc_ss0_usr =
 		of_ioremap(&op->resource[0], LEO_OFF_LC_SS0_USR,
@@ -627,7 +623,7 @@ static int __devinit leo_probe(struct of_device *op,
 
 	printk(KERN_INFO "%s: leo at %lx:%lx\n",
 	       dp->full_name,
-	       par->which_io, par->physbase);
+	       par->which_io, info->fix.smem_start);
 
 	return 0;
 
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1c9b9..b7af5256e88 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg)
 	dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
 
 	/* We only need one interrupt, it will be re-enabled as needed */
-	disable_irq(ichannel->eof_irq);
+	disable_irq_nosync(ichannel->eof_irq);
 
 	complete(&mx3_fbi->flip_cmpl);
 }
@@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
 	mx3fb_blank(FB_BLANK_UNBLANK, fbi);
 
-	dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+	dev_info(dev, "registered, using mode %s\n", fb_mode);
 
 	ret = register_framebuffer(fbi);
 	if (ret < 0)
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47202b..5d4f34887a2 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@ struct {
 	struct lcd_ctrl_extif	*extif;
 	struct lcd_ctrl		*int_ctrl;
 
-	void			(*power_up)(struct device *dev);
-	void			(*power_down)(struct device *dev);
+	struct clk		*sys_ck;
 } hwa742;
 
 struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@ static void hwa742_suspend(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	/* Enable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 static void hwa742_resume(void)
 {
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(hwa742.fbdev->dev);
+	clk_enable(hwa742.sys_ck);
+
 	/* Disable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 0);
 	while (1) {
@@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	omapfb_conf = fbdev->dev->platform_data;
 	ctrl_conf = omapfb_conf->ctrl_platform_data;
 
-	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+	if (ctrl_conf == NULL) {
 		dev_err(fbdev->dev, "HWA742: missing platform data\n");
 		r = -ENOENT;
 		goto err1;
 	}
 
-	hwa742.power_down = ctrl_conf->power_down;
-	hwa742.power_up = ctrl_conf->power_up;
+	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
 
 	spin_lock_init(&hwa742.req_lock);
 
@@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	if ((r = hwa742.extif->init(fbdev)) < 0)
 		goto err2;
 
-	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+	ext_clk = clk_get_rate(hwa742.sys_ck);
 	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
 		goto err3;
 	hwa742.extif->set_timings(&hwa742.reg_timings);
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(fbdev->dev);
+	clk_enable(hwa742.sys_ck);
 
 	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
 	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 
 	return 0;
 err4:
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 err3:
 	hwa742.extif->cleanup();
 err2:
@@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	hwa742.extif->cleanup();
 	hwa742.int_ctrl->cleanup();
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 struct lcd_ctrl hwa742_ctrl = {
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index 7000f2cd585..7fa4ab01b0d 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -134,9 +134,7 @@ struct p9100_par {
 	u32			flags;
 #define P9100_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 /**
@@ -224,18 +222,16 @@ static int p9100_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct p9100_par *par = (struct p9100_par *)info->par;
 
 	return sbusfb_mmap_helper(p9100_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
 static int p9100_ioctl(struct fb_info *info, unsigned int cmd,
 		       unsigned long arg)
 {
-	struct p9100_par *par = (struct p9100_par *) info->par;
-
 	/* Make it look like a cg3. */
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUN3COLOR, 8, par->fbsize);
+				   FBTYPE_SUN3COLOR, 8, info->fix.smem_len);
 }
 
 /*
@@ -271,7 +267,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 	spin_lock_init(&par->lock);
 
 	/* This is the framebuffer and the only resource apps can mmap.  */
-	par->physbase = op->resource[2].start;
+	info->fix.smem_start = op->resource[2].start;
 	par->which_io = op->resource[2].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 8);
@@ -280,7 +276,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 	info->var.blue.length = 8;
 
 	linebytes = of_getintprop_default(dp, "linebytes", info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->regs = of_ioremap(&op->resource[0], 0,
 			       sizeof(struct p9100_regs), "p9100 regs");
@@ -290,7 +286,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &p9100_ops;
 	info->screen_base = of_ioremap(&op->resource[2], 0,
-				       par->fbsize, "p9100 ram");
+				       info->fix.smem_len, "p9100 ram");
 	if (!info->screen_base)
 		goto out_unmap_regs;
 
@@ -311,7 +307,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 
 	printk(KERN_INFO "%s: p9100 at %lx:%lx\n",
 	       dp->full_name,
-	       par->which_io, par->physbase);
+	       par->which_io, info->fix.smem_start);
 
 	return 0;
 
@@ -319,7 +315,7 @@ out_dealloc_cmap:
 	fb_dealloc_cmap(&info->cmap);
 
 out_unmap_screen:
-	of_iounmap(&op->resource[2], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[2], info->screen_base, info->fix.smem_len);
 
 out_unmap_regs:
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct p9100_regs));
@@ -340,7 +336,7 @@ static int __devexit p9100_remove(struct of_device *op)
 	fb_dealloc_cmap(&info->cmap);
 
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct p9100_regs));
-	of_iounmap(&op->resource[2], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[2], info->screen_base, info->fix.smem_len);
 
 	framebuffer_release(info);
 
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index e00c1dff55d..c0af638fe70 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -32,25 +32,16 @@
 #include <linux/init.h>
 
 #include <asm/abs_addr.h>
+#include <asm/iommu.h>
 #include <asm/lv1call.h>
 #include <asm/ps3av.h>
 #include <asm/ps3fb.h>
 #include <asm/ps3.h>
+#include <asm/ps3gpu.h>
 
 
 #define DEVICE_NAME		"ps3fb"
 
-#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC	0x101
-#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP	0x102
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP	0x600
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT		0x601
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC	0x602
-
-#define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION	(1ULL << 32)
-
-#define L1GPU_DISPLAY_SYNC_HSYNC		1
-#define L1GPU_DISPLAY_SYNC_VSYNC		2
-
 #define GPU_CMD_BUF_SIZE			(2 * 1024 * 1024)
 #define GPU_FB_START				(64 * 1024)
 #define GPU_IOIF				(0x0d000000UL)
@@ -462,33 +453,27 @@ static void ps3fb_sync_image(struct device *dev, u64 frame_offset,
 	src_offset += GPU_FB_START;
 
 	mutex_lock(&ps3_gpu_mutex);
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
-					   dst_offset, GPU_IOIF + src_offset,
-					   L1GPU_FB_BLIT_WAIT_FOR_COMPLETION |
-					   (width << 16) | height,
-					   line_length);
+	status = lv1_gpu_fb_blit(ps3fb.context_handle, dst_offset,
+				 GPU_IOIF + src_offset,
+				 L1GPU_FB_BLIT_WAIT_FOR_COMPLETION |
+				 (width << 16) | height,
+				 line_length);
 	mutex_unlock(&ps3_gpu_mutex);
 
 	if (status)
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute FB_BLIT failed: %d\n",
-			__func__, status);
+		dev_err(dev, "%s: lv1_gpu_fb_blit failed: %d\n", __func__,
+			status);
 #ifdef HEAD_A
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP,
-					   0, frame_offset, 0, 0);
+	status = lv1_gpu_display_flip(ps3fb.context_handle, 0, frame_offset);
 	if (status)
-		dev_err(dev, "%s: lv1_gpu_context_attribute FLIP failed: %d\n",
-			__func__, status);
+		dev_err(dev, "%s: lv1_gpu_display_flip failed: %d\n", __func__,
+			status);
 #endif
 #ifdef HEAD_B
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP,
-					   1, frame_offset, 0, 0);
+	status = lv1_gpu_display_flip(ps3fb.context_handle, 1, frame_offset);
 	if (status)
-		dev_err(dev, "%s: lv1_gpu_context_attribute FLIP failed: %d\n",
-			__func__, status);
+		dev_err(dev, "%s: lv1_gpu_display_flip failed: %d\n", __func__,
+			status);
 #endif
 }
 
@@ -956,73 +941,6 @@ static irqreturn_t ps3fb_vsync_interrupt(int irq, void *ptr)
 }
 
 
-static int ps3fb_vsync_settings(struct gpu_driver_info *dinfo,
-				struct device *dev)
-{
-	int error;
-
-	dev_dbg(dev, "version_driver:%x\n", dinfo->version_driver);
-	dev_dbg(dev, "irq outlet:%x\n", dinfo->irq.irq_outlet);
-	dev_dbg(dev,
-		"version_gpu: %x memory_size: %x ch: %x core_freq: %d "
-		"mem_freq:%d\n",
-		dinfo->version_gpu, dinfo->memory_size, dinfo->hardware_channel,
-		dinfo->nvcore_frequency/1000000, dinfo->memory_frequency/1000000);
-
-	if (dinfo->version_driver != GPU_DRIVER_INFO_VERSION) {
-		dev_err(dev, "%s: version_driver err:%x\n", __func__,
-			dinfo->version_driver);
-		return -EINVAL;
-	}
-
-	error = ps3_irq_plug_setup(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet,
-				   &ps3fb.irq_no);
-	if (error) {
-		dev_err(dev, "%s: ps3_alloc_irq failed %d\n", __func__, error);
-		return error;
-	}
-
-	error = request_irq(ps3fb.irq_no, ps3fb_vsync_interrupt, IRQF_DISABLED,
-			    DEVICE_NAME, dev);
-	if (error) {
-		dev_err(dev, "%s: request_irq failed %d\n", __func__, error);
-		ps3_irq_plug_destroy(ps3fb.irq_no);
-		return error;
-	}
-
-	dinfo->irq.mask = (1 << GPU_INTR_STATUS_VSYNC_1) |
-			  (1 << GPU_INTR_STATUS_FLIP_1);
-	return 0;
-}
-
-static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev)
-{
-	int status;
-
-	status = lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF,
-				       xdr_lpar, ps3fb_videomemory.size, 0);
-	if (status) {
-		dev_err(dev, "%s: lv1_gpu_context_iomap failed: %d\n",
-			__func__, status);
-		return -ENXIO;
-	}
-	dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n",
-		ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
-		ps3fb_videomemory.size);
-
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP,
-					   xdr_lpar, GPU_CMD_BUF_SIZE,
-					   GPU_IOIF, 0);
-	if (status) {
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute FB_SETUP failed: %d\n",
-			__func__, status);
-		return -ENXIO;
-	}
-	return 0;
-}
-
 static struct fb_ops ps3fb_ops = {
 	.fb_open	= ps3fb_open,
 	.fb_release	= ps3fb_release,
@@ -1048,49 +966,18 @@ static struct fb_fix_screeninfo ps3fb_fix __initdata = {
 	.accel =	FB_ACCEL_NONE,
 };
 
-static int ps3fb_set_sync(struct device *dev)
-{
-	int status;
-
-#ifdef HEAD_A
-	status = lv1_gpu_context_attribute(0x0,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC,
-					   0, L1GPU_DISPLAY_SYNC_VSYNC, 0, 0);
-	if (status) {
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute DISPLAY_SYNC failed: "
-			"%d\n",
-			__func__, status);
-		return -1;
-	}
-#endif
-#ifdef HEAD_B
-	status = lv1_gpu_context_attribute(0x0,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC,
-					   1, L1GPU_DISPLAY_SYNC_VSYNC, 0, 0);
-
-	if (status) {
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute DISPLAY_SYNC failed: "
-			"%d\n",
-			__func__, status);
-		return -1;
-	}
-#endif
-	return 0;
-}
-
 static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 {
 	struct fb_info *info;
 	struct ps3fb_par *par;
-	int retval = -ENOMEM;
+	int retval;
 	u64 ddr_lpar = 0;
 	u64 lpar_dma_control = 0;
 	u64 lpar_driver_info = 0;
 	u64 lpar_reports = 0;
 	u64 lpar_reports_size = 0;
 	u64 xdr_lpar;
+	struct gpu_driver_info *dinfo;
 	void *fb_start;
 	int status;
 	struct task_struct *task;
@@ -1101,8 +988,8 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 		return -ENOMEM;
 	}
 
-	status = ps3_open_hv_device(dev);
-	if (status) {
+	retval = ps3_open_hv_device(dev);
+	if (retval) {
 		dev_err(&dev->core, "%s: ps3_open_hv_device failed\n",
 			__func__);
 		goto err;
@@ -1116,7 +1003,24 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 	atomic_set(&ps3fb.ext_flip, 0);	/* for flip with vsync */
 	init_waitqueue_head(&ps3fb.wait_vsync);
 
-	ps3fb_set_sync(&dev->core);
+#ifdef HEAD_A
+	status = lv1_gpu_display_sync(0x0, 0, L1GPU_DISPLAY_SYNC_VSYNC);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_display_sync failed: %d\n",
+			__func__, status);
+		retval = -ENODEV;
+		goto err_close_device;
+	}
+#endif
+#ifdef HEAD_B
+	status = lv1_gpu_display_sync(0x0, 1, L1GPU_DISPLAY_SYNC_VSYNC);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_display_sync failed: %d\n",
+			__func__, status);
+		retval = -ENODEV;
+		goto err_close_device;
+	}
+#endif
 
 	max_ps3fb_size = _ALIGN_UP(GPU_IOIF, 256*1024*1024) - GPU_IOIF;
 	if (ps3fb_videomemory.size > max_ps3fb_size) {
@@ -1131,7 +1035,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 	if (status) {
 		dev_err(&dev->core, "%s: lv1_gpu_memory_allocate failed: %d\n",
 			__func__, status);
-		goto err;
+		goto err_close_device;
 	}
 	dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar);
 
@@ -1141,33 +1045,85 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 					  &lpar_reports, &lpar_reports_size);
 	if (status) {
 		dev_err(&dev->core,
-			"%s: lv1_gpu_context_attribute failed: %d\n", __func__,
+			"%s: lv1_gpu_context_allocate failed: %d\n", __func__,
 			status);
 		goto err_gpu_memory_free;
 	}
 
 	/* vsync interrupt */
-	ps3fb.dinfo = (void __force *)ioremap(lpar_driver_info, 128 * 1024);
-	if (!ps3fb.dinfo) {
+	dinfo = (void __force *)ioremap(lpar_driver_info, 128 * 1024);
+	if (!dinfo) {
 		dev_err(&dev->core, "%s: ioremap failed\n", __func__);
 		goto err_gpu_context_free;
 	}
 
-	retval = ps3fb_vsync_settings(ps3fb.dinfo, &dev->core);
-	if (retval)
+	ps3fb.dinfo = dinfo;
+	dev_dbg(&dev->core, "version_driver:%x\n", dinfo->version_driver);
+	dev_dbg(&dev->core, "irq outlet:%x\n", dinfo->irq.irq_outlet);
+	dev_dbg(&dev->core, "version_gpu: %x memory_size: %x ch: %x "
+		"core_freq: %d mem_freq:%d\n", dinfo->version_gpu,
+		dinfo->memory_size, dinfo->hardware_channel,
+		dinfo->nvcore_frequency/1000000,
+		dinfo->memory_frequency/1000000);
+
+	if (dinfo->version_driver != GPU_DRIVER_INFO_VERSION) {
+		dev_err(&dev->core, "%s: version_driver err:%x\n", __func__,
+			dinfo->version_driver);
+		retval = -EINVAL;
+		goto err_iounmap_dinfo;
+	}
+
+	retval = ps3_irq_plug_setup(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet,
+				    &ps3fb.irq_no);
+	if (retval) {
+		dev_err(&dev->core, "%s: ps3_alloc_irq failed %d\n", __func__,
+			retval);
 		goto err_iounmap_dinfo;
+	}
+
+	retval = request_irq(ps3fb.irq_no, ps3fb_vsync_interrupt,
+			     IRQF_DISABLED, DEVICE_NAME, &dev->core);
+	if (retval) {
+		dev_err(&dev->core, "%s: request_irq failed %d\n", __func__,
+			retval);
+		goto err_destroy_plug;
+	}
+
+	dinfo->irq.mask = (1 << GPU_INTR_STATUS_VSYNC_1) |
+			  (1 << GPU_INTR_STATUS_FLIP_1);
 
 	/* Clear memory to prevent kernel info leakage into userspace */
 	memset(ps3fb_videomemory.address, 0, ps3fb_videomemory.size);
 
 	xdr_lpar = ps3_mm_phys_to_lpar(__pa(ps3fb_videomemory.address));
-	retval = ps3fb_xdr_settings(xdr_lpar, &dev->core);
-	if (retval)
+
+	status = lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF,
+				       xdr_lpar, ps3fb_videomemory.size,
+				       CBE_IOPTE_PP_W | CBE_IOPTE_PP_R |
+				       CBE_IOPTE_M);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_context_iomap failed: %d\n",
+			__func__, status);
+		retval =  -ENXIO;
 		goto err_free_irq;
+	}
+
+	dev_dbg(&dev->core, "video:%p ioif:%lx lpar:%llx size:%lx\n",
+		ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
+		ps3fb_videomemory.size);
+
+	status = lv1_gpu_fb_setup(ps3fb.context_handle, xdr_lpar,
+				  GPU_CMD_BUF_SIZE, GPU_IOIF);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_fb_setup failed: %d\n",
+			__func__, status);
+		retval = -ENXIO;
+		goto err_context_unmap;
+	}
 
 	info = framebuffer_alloc(sizeof(struct ps3fb_par), &dev->core);
 	if (!info)
-		goto err_free_irq;
+		goto err_context_fb_close;
 
 	par = info->par;
 	par->mode_id = ~ps3fb_mode;	/* != ps3fb_mode, to trigger change */
@@ -1210,7 +1166,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 	if (retval < 0)
 		goto err_fb_dealloc;
 
-	dev->core.driver_data = info;
+	ps3_system_bus_set_drvdata(dev, info);
 
 	dev_info(info->device, "%s %s, using %u KiB of video memory\n",
 		 dev_driver_string(info->dev), dev_name(info->dev),
@@ -1232,8 +1188,14 @@ err_fb_dealloc:
 	fb_dealloc_cmap(&info->cmap);
 err_framebuffer_release:
 	framebuffer_release(info);
+err_context_fb_close:
+	lv1_gpu_fb_close(ps3fb.context_handle);
+err_context_unmap:
+	lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF, xdr_lpar,
+			      ps3fb_videomemory.size, CBE_IOPTE_M);
 err_free_irq:
 	free_irq(ps3fb.irq_no, &dev->core);
+err_destroy_plug:
 	ps3_irq_plug_destroy(ps3fb.irq_no);
 err_iounmap_dinfo:
 	iounmap((u8 __force __iomem *)ps3fb.dinfo);
@@ -1241,14 +1203,16 @@ err_gpu_context_free:
 	lv1_gpu_context_free(ps3fb.context_handle);
 err_gpu_memory_free:
 	lv1_gpu_memory_free(ps3fb.memory_handle);
+err_close_device:
+	ps3_close_hv_device(dev);
 err:
 	return retval;
 }
 
 static int ps3fb_shutdown(struct ps3_system_bus_device *dev)
 {
-	int status;
-	struct fb_info *info = dev->core.driver_data;
+	struct fb_info *info = ps3_system_bus_get_drvdata(dev);
+	u64 xdr_lpar = ps3_mm_phys_to_lpar(__pa(ps3fb_videomemory.address));
 
 	dev_dbg(&dev->core, " -> %s:%d\n", __func__, __LINE__);
 
@@ -1268,20 +1232,14 @@ static int ps3fb_shutdown(struct ps3_system_bus_device *dev)
 		unregister_framebuffer(info);
 		fb_dealloc_cmap(&info->cmap);
 		framebuffer_release(info);
-		info = dev->core.driver_data = NULL;
+		ps3_system_bus_set_drvdata(dev, NULL);
 	}
 	iounmap((u8 __force __iomem *)ps3fb.dinfo);
-
-	status = lv1_gpu_context_free(ps3fb.context_handle);
-	if (status)
-		dev_dbg(&dev->core, "lv1_gpu_context_free failed: %d\n",
-			status);
-
-	status = lv1_gpu_memory_free(ps3fb.memory_handle);
-	if (status)
-		dev_dbg(&dev->core, "lv1_gpu_memory_free failed: %d\n",
-			status);
-
+	lv1_gpu_fb_close(ps3fb.context_handle);
+	lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF, xdr_lpar,
+			      ps3fb_videomemory.size, CBE_IOPTE_M);
+	lv1_gpu_context_free(ps3fb.context_handle);
+	lv1_gpu_memory_free(ps3fb.memory_handle);
 	ps3_close_hv_device(dev);
 	dev_dbg(&dev->core, " <- %s:%d\n", __func__, __LINE__);
 
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
new file mode 100644
index 00000000000..84d8327e47d
--- /dev/null
+++ b/drivers/video/pxa168fb.c
@@ -0,0 +1,803 @@
+/*
+ * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
+ *
+ *  Copyright (C) 2008 Marvell International Ltd.
+ *  All rights reserved.
+ *
+ *  2009-02-16  adapted from original version for PXA168/910
+ *              Jun Nie <njun@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <video/pxa168fb.h>
+
+#include "pxa168fb.h"
+
+#define DEFAULT_REFRESH		60	/* Hz */
+
+static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
+{
+	/*
+	 * Pseudocolor mode?
+	 */
+	if (var->bits_per_pixel == 8)
+		return PIX_FMT_PSEUDOCOLOR;
+
+	/*
+	 * Check for 565/1555.
+	 */
+	if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
+	    var->green.length <= 6 && var->blue.length <= 5) {
+		if (var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB565;
+			else
+				return PIX_FMT_BGR565;
+		}
+
+		if (var->transp.length == 1 && var->green.length <= 5) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB1555;
+			else
+				return PIX_FMT_BGR1555;
+		}
+
+		/* fall through */
+	}
+
+	/*
+	 * Check for 888/A888.
+	 */
+	if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
+	    var->green.length <= 8 && var->blue.length <= 8) {
+		if (var->bits_per_pixel == 24 && var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888PACK;
+			else
+				return PIX_FMT_BGR888PACK;
+		}
+
+		if (var->bits_per_pixel == 32 && var->transp.length == 8) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGBA888;
+			else
+				return PIX_FMT_BGRA888;
+		} else {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888UNPACK;
+			else
+				return PIX_FMT_BGR888UNPACK;
+		}
+
+		/* fall through */
+	}
+
+	return -EINVAL;
+}
+
+static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
+{
+	switch (pix_fmt) {
+	case PIX_FMT_RGB565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 11;   var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGB1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_BGR1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 10;   var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_RGB888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGBA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_BGRA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_PSEUDOCOLOR:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 0;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	}
+}
+
+static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
+		     struct fb_videomode *mode, int pix_fmt, int ystretch)
+{
+	struct fb_info *info = fbi->info;
+
+	set_pix_fmt(var, pix_fmt);
+
+	var->xres = mode->xres;
+	var->yres = mode->yres;
+	var->xres_virtual = max(var->xres, var->xres_virtual);
+	if (ystretch)
+		var->yres_virtual = info->fix.smem_len /
+			(var->xres_virtual * (var->bits_per_pixel >> 3));
+	else
+		var->yres_virtual = max(var->yres, var->yres_virtual);
+	var->grayscale = 0;
+	var->accel_flags = FB_ACCEL_NONE;
+	var->pixclock = mode->pixclock;
+	var->left_margin = mode->left_margin;
+	var->right_margin = mode->right_margin;
+	var->upper_margin = mode->upper_margin;
+	var->lower_margin = mode->lower_margin;
+	var->hsync_len = mode->hsync_len;
+	var->vsync_len = mode->vsync_len;
+	var->sync = mode->sync;
+	var->vmode = FB_VMODE_NONINTERLACED;
+	var->rotate = FB_ROTATE_UR;
+}
+
+static int pxa168fb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	int pix_fmt;
+
+	/*
+	 * Determine which pixel format we're going to use.
+	 */
+	pix_fmt = determine_best_pix_fmt(var);
+	if (pix_fmt < 0)
+		return pix_fmt;
+	set_pix_fmt(var, pix_fmt);
+	fbi->pix_fmt = pix_fmt;
+
+	/*
+	 * Basic geometry sanity checks.
+	 */
+	if (var->xoffset + var->xres > var->xres_virtual)
+		return -EINVAL;
+	if (var->yoffset + var->yres > var->yres_virtual)
+		return -EINVAL;
+	if (var->xres + var->right_margin +
+	    var->hsync_len + var->left_margin > 2048)
+		return -EINVAL;
+	if (var->yres + var->lower_margin +
+	    var->vsync_len + var->upper_margin > 2048)
+		return -EINVAL;
+
+	/*
+	 * Check size of framebuffer.
+	 */
+	if (var->xres_virtual * var->yres_virtual *
+	    (var->bits_per_pixel >> 3) > info->fix.smem_len)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * The hardware clock divider has an integer and a fractional
+ * stage:
+ *
+ *	clk2 = clk_in / integer_divider
+ *	clk_out = clk2 * (1 - (fractional_divider >> 12))
+ *
+ * Calculate integer and fractional divider for given clk_in
+ * and clk_out.
+ */
+static void set_clock_divider(struct pxa168fb_info *fbi,
+			      const struct fb_videomode *m)
+{
+	int divider_int;
+	int needed_pixclk;
+	u64 div_result;
+	u32 x = 0;
+
+	/*
+	 * Notice: The field pixclock is used by linux fb
+	 * is in pixel second. E.g. struct fb_videomode &
+	 * struct fb_var_screeninfo
+	 */
+
+	/*
+	 * Check input values.
+	 */
+	if (!m || !m->pixclock || !m->refresh) {
+		dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
+		return;
+	}
+
+	/*
+	 * Using PLL/AXI clock.
+	 */
+	x = 0x80000000;
+
+	/*
+	 * Calc divider according to refresh rate.
+	 */
+	div_result = 1000000000000ll;
+	do_div(div_result, m->pixclock);
+	needed_pixclk = (u32)div_result;
+
+	divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
+
+	/* check whether divisor is too small. */
+	if (divider_int < 2) {
+		dev_warn(fbi->dev, "Warning: clock source is too slow."
+				"Try smaller resolution\n");
+		divider_int = 2;
+	}
+
+	/*
+	 * Set setting to reg.
+	 */
+	x |= divider_int;
+	writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
+}
+
+static void set_dma_control0(struct pxa168fb_info *fbi)
+{
+	u32 x;
+
+	/*
+	 * Set bit to enable graphics DMA.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+	x |= fbi->active ? 0x00000100 : 0;
+	fbi->active = 0;
+
+	/*
+	 * If we are in a pseudo-color mode, we need to enable
+	 * palette lookup.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		x |= 0x10000000;
+
+	/*
+	 * Configure hardware pixel format.
+	 */
+	x &= ~(0xF << 16);
+	x |= (fbi->pix_fmt >> 1) << 16;
+
+	/*
+	 * Check red and blue pixel swap.
+	 * 1. source data swap
+	 * 2. panel output data swap
+	 */
+	x &= ~(1 << 12);
+	x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+}
+
+static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
+{
+	u32 x;
+
+	/*
+	 * Configure default bits: vsync triggers DMA, gated clock
+	 * enable, power save enable, configure alpha registers to
+	 * display 100% graphics, and set pixel command.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
+	x |= 0x2032ff81;
+
+	/*
+	 * We trigger DMA on the falling edge of vsync if vsync is
+	 * active low, or on the rising edge if vsync is active high.
+	 */
+	if (!(sync & FB_SYNC_VERT_HIGH_ACT))
+		x |= 0x08000000;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
+}
+
+static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int pixel_offset;
+	unsigned long addr;
+
+	pixel_offset = (yoffset * var->xres_virtual) + xoffset;
+
+	addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
+	writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
+}
+
+static void set_dumb_panel_control(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
+	u32 x;
+
+	/*
+	 * Preserve enable flag.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
+
+	x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
+	x |= mi->gpio_output_data << 20;
+	x |= mi->gpio_output_mask << 12;
+	x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
+	x |= mi->invert_composite_blank ? 0x00000040 : 0;
+	x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
+	x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
+	x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
+	x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
+	x |= mi->invert_pixclock ? 0x00000002 : 0;
+
+	writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+}
+
+static void set_dumb_screen_dimensions(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *v = &info->var;
+	int x;
+	int y;
+
+	x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
+	y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
+
+	writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
+}
+
+static int pxa168fb_set_par(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	struct fb_videomode mode;
+	u32 x;
+	struct pxa168fb_mach_info *mi;
+
+	mi = fbi->dev->platform_data;
+
+	/*
+	 * Set additional mode info.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+	info->fix.ypanstep = var->yres;
+
+	/*
+	 * Disable panel output while we setup the display.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	/*
+	 * Configure global panel parameters.
+	 */
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_V_H_ACTIVE);
+
+	/*
+	 * convet var to video mode
+	 */
+	fb_var_to_videomode(&mode, &info->var);
+
+	/* Calculate clock divisor. */
+	set_clock_divider(fbi, &mode);
+
+	/* Configure dma ctrl regs. */
+	set_dma_control0(fbi);
+	set_dma_control1(fbi, info->var.sync);
+
+	/*
+	 * Configure graphics DMA parameters.
+	 */
+	x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
+	x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
+	writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
+
+	/*
+	 * Configure dumb panel ctrl regs & timings.
+	 */
+	set_dumb_panel_control(info);
+	set_dumb_screen_dimensions(info);
+
+	writel((var->left_margin << 16) | var->right_margin,
+			fbi->reg_base + LCD_SPU_H_PORCH);
+	writel((var->upper_margin << 16) | var->lower_margin,
+			fbi->reg_base + LCD_SPU_V_PORCH);
+
+	/*
+	 * Re-enable panel output.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	return 0;
+}
+
+static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+	return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
+}
+
+static u32 to_rgb(u16 red, u16 green, u16 blue)
+{
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	return (red << 16) | (green << 8) | blue;
+}
+
+static int
+pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+		 unsigned int blue, unsigned int trans, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	u32 val;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+					7471 * blue) >> 16;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
+		val =  chan_to_field(red,   &info->var.red);
+		val |= chan_to_field(green, &info->var.green);
+		val |= chan_to_field(blue , &info->var.blue);
+		fbi->pseudo_palette[regno] = val;
+	}
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+		val = to_rgb(red, green, blue);
+		writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
+		writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
+	}
+
+	return 0;
+}
+
+static int pxa168fb_blank(int blank, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+
+	fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
+	set_dumb_panel_control(info);
+
+	return 0;
+}
+
+static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	set_graphics_start(info, var->xoffset, var->yoffset);
+
+	return 0;
+}
+
+static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
+{
+	struct pxa168fb_info *fbi = dev_id;
+	u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
+
+	if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
+
+		writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
+			fbi->reg_base + SPU_IRQ_ISR);
+
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static struct fb_ops pxa168fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= pxa168fb_check_var,
+	.fb_set_par	= pxa168fb_set_par,
+	.fb_setcolreg	= pxa168fb_setcolreg,
+	.fb_blank	= pxa168fb_blank,
+	.fb_pan_display	= pxa168fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int __init pxa168fb_init_mode(struct fb_info *info,
+			      struct pxa168fb_mach_info *mi)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int ret = 0;
+	u32 total_w, total_h, refresh;
+	u64 div_result;
+	const struct fb_videomode *m;
+
+	/*
+	 * Set default value
+	 */
+	refresh = DEFAULT_REFRESH;
+
+	/* try to find best video mode. */
+	m = fb_find_best_mode(&info->var, &info->modelist);
+	if (m)
+		fb_videomode_to_var(&info->var, m);
+
+	/* Init settings. */
+	var->xres_virtual = var->xres;
+	var->yres_virtual = info->fix.smem_len /
+		(var->xres_virtual * (var->bits_per_pixel >> 3));
+	dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
+				var->xres, var->yres);
+
+	/* correct pixclock. */
+	total_w = var->xres + var->left_margin + var->right_margin +
+		  var->hsync_len;
+	total_h = var->yres + var->upper_margin + var->lower_margin +
+		  var->vsync_len;
+
+	div_result = 1000000000000ll;
+	do_div(div_result, total_w * total_h * refresh);
+	var->pixclock = (u32)div_result;
+
+	return ret;
+}
+
+static int __init pxa168fb_probe(struct platform_device *pdev)
+{
+	struct pxa168fb_mach_info *mi;
+	struct fb_info *info = 0;
+	struct pxa168fb_info *fbi = 0;
+	struct resource *res;
+	struct clk *clk;
+	int irq, ret;
+
+	mi = pdev->dev.platform_data;
+	if (mi == NULL) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	clk = clk_get(&pdev->dev, "LCDCLK");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get LCDCLK");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no IO memory defined\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ defined\n");
+		return -ENOENT;
+	}
+
+	info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
+	if (info == NULL) {
+		clk_put(clk);
+		return -ENOMEM;
+	}
+
+	/* Initialize private data */
+	fbi = info->par;
+	fbi->info = info;
+	fbi->clk = clk;
+	fbi->dev = info->dev = &pdev->dev;
+	fbi->panel_rbswap = mi->panel_rbswap;
+	fbi->is_blanked = 0;
+	fbi->active = mi->active;
+
+	/*
+	 * Initialise static fb parameters.
+	 */
+	info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
+		      FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+	info->node = -1;
+	strlcpy(info->fix.id, mi->id, 16);
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux = 0;
+	info->fix.xpanstep = 0;
+	info->fix.ypanstep = 0;
+	info->fix.ywrapstep = 0;
+	info->fix.mmio_start = res->start;
+	info->fix.mmio_len = res->end - res->start + 1;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->fbops = &pxa168fb_ops;
+	info->pseudo_palette = fbi->pseudo_palette;
+
+	/*
+	 * Map LCD controller registers.
+	 */
+	fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+	if (fbi->reg_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	/*
+	 * Allocate framebuffer memory.
+	 */
+	info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
+						&fbi->fb_start_dma, GFP_KERNEL);
+	if (info->screen_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+
+	/*
+	 * Set video mode according to platform data.
+	 */
+	set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
+
+	fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
+
+	/*
+	 * init video mode data.
+	 */
+	pxa168fb_init_mode(info, mi);
+
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed_free_fbmem;
+
+	/*
+	 * Fill in sane defaults.
+	 */
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed;
+
+	/*
+	 * enable controller clock
+	 */
+	clk_enable(fbi->clk);
+
+	pxa168fb_set_par(info);
+
+	/*
+	 * Configure default register values.
+	 */
+	writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
+	writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
+	writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
+	writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
+	writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
+	writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
+		fbi->reg_base + LCD_SPU_SRAM_PARA1);
+
+	/*
+	 * Allocate color map.
+	 */
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		ret = -ENOMEM;
+		goto failed_free_clk;
+	}
+
+	/*
+	 * Register irq handler.
+	 */
+	ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
+					info->fix.id, fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to request IRQ\n");
+		ret = -ENXIO;
+		goto failed_free_cmap;
+	}
+
+	/*
+	 * Enable GFX interrupt
+	 */
+	writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
+
+	/*
+	 * Register framebuffer.
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
+		ret = -ENXIO;
+		goto failed_free_irq;
+	}
+
+	platform_set_drvdata(pdev, fbi);
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, fbi);
+failed_free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+failed_free_clk:
+	clk_disable(fbi->clk);
+failed_free_fbmem:
+	dma_free_coherent(fbi->dev, info->fix.smem_len,
+			info->screen_base, fbi->fb_start_dma);
+failed:
+	kfree(info);
+	clk_put(clk);
+
+	dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
+	return ret;
+}
+
+static struct platform_driver pxa168fb_driver = {
+	.driver		= {
+		.name	= "pxa168-fb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pxa168fb_probe,
+};
+
+static int __devinit pxa168fb_init(void)
+{
+	return platform_driver_register(&pxa168fb_driver);
+}
+module_init(pxa168fb_init);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
+	      "Green Wan <gwan@marvell.com>");
+MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h
new file mode 100644
index 00000000000..eee09279c52
--- /dev/null
+++ b/drivers/video/pxa168fb.h
@@ -0,0 +1,558 @@
+#ifndef __PXA168FB_H__
+#define __PXA168FB_H__
+
+/* ------------< LCD register >------------ */
+/* Video Frame 0&1 start address registers */
+#define	LCD_SPU_DMA_START_ADDR_Y0		0x00C0
+#define	LCD_SPU_DMA_START_ADDR_U0		0x00C4
+#define	LCD_SPU_DMA_START_ADDR_V0		0x00C8
+#define LCD_CFG_DMA_START_ADDR_0		0x00CC /* Cmd address */
+#define	LCD_SPU_DMA_START_ADDR_Y1		0x00D0
+#define	LCD_SPU_DMA_START_ADDR_U1		0x00D4
+#define	LCD_SPU_DMA_START_ADDR_V1		0x00D8
+#define LCD_CFG_DMA_START_ADDR_1		0x00DC /* Cmd address */
+
+/* YC & UV Pitch */
+#define LCD_SPU_DMA_PITCH_YC			0x00E0
+#define     SPU_DMA_PITCH_C(c)			((c) << 16)
+#define     SPU_DMA_PITCH_Y(y)			(y)
+#define LCD_SPU_DMA_PITCH_UV			0x00E4
+#define     SPU_DMA_PITCH_V(v)			((v) << 16)
+#define     SPU_DMA_PITCH_U(u)			(u)
+
+/* Video Starting Point on Screen Register */
+#define LCD_SPUT_DMA_OVSA_HPXL_VLN		0x00E8
+#define     CFG_DMA_OVSA_VLN(y)			((y) << 16) /* 0~0xfff */
+#define     CFG_DMA_OVSA_HPXL(x)		(x)     /* 0~0xfff */
+
+/* Video Size Register */
+#define LCD_SPU_DMA_HPXL_VLN			0x00EC
+#define     CFG_DMA_VLN(y)			((y) << 16)
+#define     CFG_DMA_HPXL(x)			(x)
+
+/* Video Size After zooming Register */
+#define LCD_SPU_DZM_HPXL_VLN			0x00F0
+#define     CFG_DZM_VLN(y)			((y) << 16)
+#define     CFG_DZM_HPXL(x)			(x)
+
+/* Graphic Frame 0&1 Starting Address Register */
+#define LCD_CFG_GRA_START_ADDR0			0x00F4
+#define LCD_CFG_GRA_START_ADDR1			0x00F8
+
+/* Graphic Frame Pitch */
+#define LCD_CFG_GRA_PITCH			0x00FC
+
+/* Graphic Starting Point on Screen Register */
+#define LCD_SPU_GRA_OVSA_HPXL_VLN		0x0100
+#define     CFG_GRA_OVSA_VLN(y)			((y) << 16)
+#define     CFG_GRA_OVSA_HPXL(x)		(x)
+
+/* Graphic Size Register */
+#define LCD_SPU_GRA_HPXL_VLN			0x0104
+#define     CFG_GRA_VLN(y)			((y) << 16)
+#define     CFG_GRA_HPXL(x)			(x)
+
+/* Graphic Size after Zooming Register */
+#define LCD_SPU_GZM_HPXL_VLN			0x0108
+#define     CFG_GZM_VLN(y)			((y) << 16)
+#define     CFG_GZM_HPXL(x)			(x)
+
+/* HW Cursor Starting Point on Screen Register */
+#define LCD_SPU_HWC_OVSA_HPXL_VLN		0x010C
+#define     CFG_HWC_OVSA_VLN(y)			((y) << 16)
+#define     CFG_HWC_OVSA_HPXL(x)		(x)
+
+/* HW Cursor Size */
+#define LCD_SPU_HWC_HPXL_VLN			0x0110
+#define     CFG_HWC_VLN(y)			((y) << 16)
+#define     CFG_HWC_HPXL(x)			(x)
+
+/* Total Screen Size Register */
+#define LCD_SPUT_V_H_TOTAL			0x0114
+#define     CFG_V_TOTAL(y)			((y) << 16)
+#define     CFG_H_TOTAL(x)			(x)
+
+/* Total Screen Active Size Register */
+#define LCD_SPU_V_H_ACTIVE			0x0118
+#define     CFG_V_ACTIVE(y)			((y) << 16)
+#define     CFG_H_ACTIVE(x)			(x)
+
+/* Screen H&V Porch Register */
+#define LCD_SPU_H_PORCH				0x011C
+#define     CFG_H_BACK_PORCH(b)			((b) << 16)
+#define     CFG_H_FRONT_PORCH(f)		(f)
+#define LCD_SPU_V_PORCH				0x0120
+#define     CFG_V_BACK_PORCH(b)			((b) << 16)
+#define     CFG_V_FRONT_PORCH(f)		(f)
+
+/* Screen Blank Color Register */
+#define LCD_SPU_BLANKCOLOR			0x0124
+#define     CFG_BLANKCOLOR_MASK			0x00FFFFFF
+#define     CFG_BLANKCOLOR_R_MASK		0x000000FF
+#define     CFG_BLANKCOLOR_G_MASK		0x0000FF00
+#define     CFG_BLANKCOLOR_B_MASK		0x00FF0000
+
+/* HW Cursor Color 1&2 Register */
+#define LCD_SPU_ALPHA_COLOR1			0x0128
+#define     CFG_HWC_COLOR1			0x00FFFFFF
+#define     CFG_HWC_COLOR1_R(red)		((red) << 16)
+#define     CFG_HWC_COLOR1_G(green)		((green) << 8)
+#define     CFG_HWC_COLOR1_B(blue)		(blue)
+#define     CFG_HWC_COLOR1_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR1_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR1_B_MASK		0x00FF0000
+#define LCD_SPU_ALPHA_COLOR2			0x012C
+#define     CFG_HWC_COLOR2			0x00FFFFFF
+#define     CFG_HWC_COLOR2_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR2_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR2_B_MASK		0x00FF0000
+
+/* Video YUV Color Key Control */
+#define LCD_SPU_COLORKEY_Y			0x0130
+#define     CFG_CKEY_Y2(y2)			((y2) << 24)
+#define     CFG_CKEY_Y2_MASK			0xFF000000
+#define     CFG_CKEY_Y1(y1)			((y1) << 16)
+#define     CFG_CKEY_Y1_MASK			0x00FF0000
+#define     CFG_CKEY_Y(y)			((y) << 8)
+#define     CFG_CKEY_Y_MASK			0x0000FF00
+#define     CFG_ALPHA_Y(y)			(y)
+#define     CFG_ALPHA_Y_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_U			0x0134
+#define     CFG_CKEY_U2(u2)			((u2) << 24)
+#define     CFG_CKEY_U2_MASK			0xFF000000
+#define     CFG_CKEY_U1(u1)			((u1) << 16)
+#define     CFG_CKEY_U1_MASK			0x00FF0000
+#define     CFG_CKEY_U(u)			((u) << 8)
+#define     CFG_CKEY_U_MASK			0x0000FF00
+#define     CFG_ALPHA_U(u)			(u)
+#define     CFG_ALPHA_U_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_V			0x0138
+#define     CFG_CKEY_V2(v2)			((v2) << 24)
+#define     CFG_CKEY_V2_MASK			0xFF000000
+#define     CFG_CKEY_V1(v1)			((v1) << 16)
+#define     CFG_CKEY_V1_MASK			0x00FF0000
+#define     CFG_CKEY_V(v)			((v) << 8)
+#define     CFG_CKEY_V_MASK			0x0000FF00
+#define     CFG_ALPHA_V(v)			(v)
+#define     CFG_ALPHA_V_MASK			0x000000FF
+
+/* SPI Read Data Register */
+#define LCD_SPU_SPI_RXDATA			0x0140
+
+/* Smart Panel Read Data Register */
+#define LCD_SPU_ISA_RSDATA			0x0144
+#define     ISA_RXDATA_16BIT_1_DATA_MASK	0x000000FF
+#define     ISA_RXDATA_16BIT_2_DATA_MASK	0x0000FF00
+#define     ISA_RXDATA_16BIT_3_DATA_MASK	0x00FF0000
+#define     ISA_RXDATA_16BIT_4_DATA_MASK	0xFF000000
+#define     ISA_RXDATA_32BIT_1_DATA_MASK	0x00FFFFFF
+
+/* HWC SRAM Read Data Register */
+#define LCD_SPU_HWC_RDDAT			0x0158
+
+/* Gamma Table SRAM Read Data Register */
+#define LCD_SPU_GAMMA_RDDAT			0x015c
+#define     CFG_GAMMA_RDDAT_MASK		0x000000FF
+
+/* Palette Table SRAM Read Data Register */
+#define LCD_SPU_PALETTE_RDDAT			0x0160
+#define     CFG_PALETTE_RDDAT_MASK		0x00FFFFFF
+
+/* I/O Pads Input Read Only Register */
+#define LCD_SPU_IOPAD_IN			0x0178
+#define     CFG_IOPAD_IN_MASK			0x0FFFFFFF
+
+/* Reserved Read Only Registers */
+#define LCD_CFG_RDREG5F				0x017C
+#define     IRE_FRAME_CNT_MASK			0x000000C0
+#define     IPE_FRAME_CNT_MASK			0x00000030
+#define     GRA_FRAME_CNT_MASK			0x0000000C  /* Graphic */
+#define     DMA_FRAME_CNT_MASK			0x00000003  /* Video */
+
+/* SPI Control Register. */
+#define LCD_SPU_SPI_CTRL			0x0180
+#define     CFG_SCLKCNT(div)			((div) << 24)  /* 0xFF~0x2 */
+#define     CFG_SCLKCNT_MASK			0xFF000000
+#define     CFG_RXBITS(rx)			((rx) << 16)   /* 0x1F~0x1 */
+#define     CFG_RXBITS_MASK			0x00FF0000
+#define     CFG_TXBITS(tx)			((tx) << 8)    /* 0x1F~0x1 */
+#define     CFG_TXBITS_MASK			0x0000FF00
+#define     CFG_CLKINV(clk)			((clk) << 7)
+#define     CFG_CLKINV_MASK			0x00000080
+#define     CFG_KEEPXFER(transfer)		((transfer) << 6)
+#define     CFG_KEEPXFER_MASK			0x00000040
+#define     CFG_RXBITSTO0(rx)			((rx) << 5)
+#define     CFG_RXBITSTO0_MASK			0x00000020
+#define     CFG_TXBITSTO0(tx)			((tx) << 4)
+#define     CFG_TXBITSTO0_MASK			0x00000010
+#define     CFG_SPI_ENA(spi)			((spi) << 3)
+#define     CFG_SPI_ENA_MASK			0x00000008
+#define     CFG_SPI_SEL(spi)			((spi) << 2)
+#define     CFG_SPI_SEL_MASK			0x00000004
+#define     CFG_SPI_3W4WB(wire)			((wire) << 1)
+#define     CFG_SPI_3W4WB_MASK			0x00000002
+#define     CFG_SPI_START(start)		(start)
+#define     CFG_SPI_START_MASK			0x00000001
+
+/* SPI Tx Data Register */
+#define LCD_SPU_SPI_TXDATA			0x0184
+
+/*
+   1. Smart Pannel 8-bit Bus Control Register.
+   2. AHB Slave Path Data Port Register
+*/
+#define LCD_SPU_SMPN_CTRL			0x0188
+
+/* DMA Control 0 Register */
+#define LCD_SPU_DMA_CTRL0			0x0190
+#define     CFG_NOBLENDING(nb)			((nb) << 31)
+#define     CFG_NOBLENDING_MASK			0x80000000
+#define     CFG_GAMMA_ENA(gn)			((gn) << 30)
+#define     CFG_GAMMA_ENA_MASK			0x40000000
+#define     CFG_CBSH_ENA(cn)			((cn) << 29)
+#define     CFG_CBSH_ENA_MASK			0x20000000
+#define     CFG_PALETTE_ENA(pn)			((pn) << 28)
+#define     CFG_PALETTE_ENA_MASK		0x10000000
+#define     CFG_ARBFAST_ENA(an)			((an) << 27)
+#define     CFG_ARBFAST_ENA_MASK		0x08000000
+#define     CFG_HWC_1BITMOD(mode)		((mode) << 26)
+#define     CFG_HWC_1BITMOD_MASK		0x04000000
+#define     CFG_HWC_1BITENA(mn)			((mn) << 25)
+#define     CFG_HWC_1BITENA_MASK		0x02000000
+#define     CFG_HWC_ENA(cn)		        ((cn) << 24)
+#define     CFG_HWC_ENA_MASK			0x01000000
+#define     CFG_DMAFORMAT(dmaformat)		((dmaformat) << 20)
+#define     CFG_DMAFORMAT_MASK			0x00F00000
+#define     CFG_GRAFORMAT(graformat)		((graformat) << 16)
+#define     CFG_GRAFORMAT_MASK			0x000F0000
+/* for graphic part */
+#define     CFG_GRA_FTOGGLE(toggle)		((toggle) << 15)
+#define     CFG_GRA_FTOGGLE_MASK		0x00008000
+#define     CFG_GRA_HSMOOTH(smooth)		((smooth) << 14)
+#define     CFG_GRA_HSMOOTH_MASK		0x00004000
+#define     CFG_GRA_TSTMODE(test)		((test) << 13)
+#define     CFG_GRA_TSTMODE_MASK		0x00002000
+#define     CFG_GRA_SWAPRB(swap)		((swap) << 12)
+#define     CFG_GRA_SWAPRB_MASK			0x00001000
+#define     CFG_GRA_SWAPUV(swap)		((swap) << 11)
+#define     CFG_GRA_SWAPUV_MASK			0x00000800
+#define     CFG_GRA_SWAPYU(swap)		((swap) << 10)
+#define     CFG_GRA_SWAPYU_MASK			0x00000400
+#define     CFG_YUV2RGB_GRA(cvrt)		((cvrt) << 9)
+#define     CFG_YUV2RGB_GRA_MASK		0x00000200
+#define     CFG_GRA_ENA(gra)			((gra) << 8)
+#define     CFG_GRA_ENA_MASK			0x00000100
+/* for video part */
+#define     CFG_DMA_FTOGGLE(toggle)		((toggle) << 7)
+#define     CFG_DMA_FTOGGLE_MASK		0x00000080
+#define     CFG_DMA_HSMOOTH(smooth)		((smooth) << 6)
+#define     CFG_DMA_HSMOOTH_MASK		0x00000040
+#define     CFG_DMA_TSTMODE(test)		((test) << 5)
+#define     CFG_DMA_TSTMODE_MASK		0x00000020
+#define     CFG_DMA_SWAPRB(swap)		((swap) << 4)
+#define     CFG_DMA_SWAPRB_MASK			0x00000010
+#define     CFG_DMA_SWAPUV(swap)		((swap) << 3)
+#define     CFG_DMA_SWAPUV_MASK			0x00000008
+#define     CFG_DMA_SWAPYU(swap)		((swap) << 2)
+#define     CFG_DMA_SWAPYU_MASK			0x00000004
+#define     CFG_DMA_SWAP_MASK			0x0000001C
+#define     CFG_YUV2RGB_DMA(cvrt)		((cvrt) << 1)
+#define     CFG_YUV2RGB_DMA_MASK		0x00000002
+#define     CFG_DMA_ENA(video)			(video)
+#define     CFG_DMA_ENA_MASK			0x00000001
+
+/* DMA Control 1 Register */
+#define LCD_SPU_DMA_CTRL1			0x0194
+#define     CFG_FRAME_TRIG(trig)		((trig) << 31)
+#define     CFG_FRAME_TRIG_MASK			0x80000000
+#define     CFG_VSYNC_TRIG(trig)		((trig) << 28)
+#define     CFG_VSYNC_TRIG_MASK			0x70000000
+#define     CFG_VSYNC_INV(inv)			((inv) << 27)
+#define     CFG_VSYNC_INV_MASK			0x08000000
+#define     CFG_COLOR_KEY_MODE(cmode)		((cmode) << 24)
+#define     CFG_COLOR_KEY_MASK			0x07000000
+#define     CFG_CARRY(carry)			((carry) << 23)
+#define     CFG_CARRY_MASK			0x00800000
+#define     CFG_LNBUF_ENA(lnbuf)		((lnbuf) << 22)
+#define     CFG_LNBUF_ENA_MASK			0x00400000
+#define     CFG_GATED_ENA(gated)		((gated) << 21)
+#define     CFG_GATED_ENA_MASK			0x00200000
+#define     CFG_PWRDN_ENA(power)		((power) << 20)
+#define     CFG_PWRDN_ENA_MASK			0x00100000
+#define     CFG_DSCALE(dscale)			((dscale) << 18)
+#define     CFG_DSCALE_MASK			0x000C0000
+#define     CFG_ALPHA_MODE(amode)		((amode) << 16)
+#define     CFG_ALPHA_MODE_MASK			0x00030000
+#define     CFG_ALPHA(alpha)			((alpha) << 8)
+#define     CFG_ALPHA_MASK			0x0000FF00
+#define     CFG_PXLCMD(pxlcmd)			(pxlcmd)
+#define     CFG_PXLCMD_MASK			0x000000FF
+
+/* SRAM Control Register */
+#define LCD_SPU_SRAM_CTRL			0x0198
+#define     CFG_SRAM_INIT_WR_RD(mode)		((mode) << 14)
+#define     CFG_SRAM_INIT_WR_RD_MASK		0x0000C000
+#define     CFG_SRAM_ADDR_LCDID(id)		((id) << 8)
+#define     CFG_SRAM_ADDR_LCDID_MASK		0x00000F00
+#define     CFG_SRAM_ADDR(addr)			(addr)
+#define     CFG_SRAM_ADDR_MASK			0x000000FF
+
+/* SRAM Write Data Register */
+#define LCD_SPU_SRAM_WRDAT			0x019C
+
+/* SRAM RTC/WTC Control Register */
+#define LCD_SPU_SRAM_PARA0			0x01A0
+
+/* SRAM Power Down Control Register */
+#define LCD_SPU_SRAM_PARA1			0x01A4
+#define     CFG_CSB_256x32(hwc)			((hwc) << 15)	/* HWC */
+#define     CFG_CSB_256x32_MASK			0x00008000
+#define     CFG_CSB_256x24(palette)		((palette) << 14)	/* Palette */
+#define     CFG_CSB_256x24_MASK			0x00004000
+#define     CFG_CSB_256x8(gamma)		((gamma) << 13)	/* Gamma */
+#define     CFG_CSB_256x8_MASK			0x00002000
+#define     CFG_PDWN256x32(pdwn)		((pdwn) << 7)	/* HWC */
+#define     CFG_PDWN256x32_MASK			0x00000080
+#define     CFG_PDWN256x24(pdwn)		((pdwn) << 6)	/* Palette */
+#define     CFG_PDWN256x24_MASK			0x00000040
+#define     CFG_PDWN256x8(pdwn)			((pdwn) << 5)	/* Gamma */
+#define     CFG_PDWN256x8_MASK			0x00000020
+#define     CFG_PDWN32x32(pdwn)			((pdwn) << 3)
+#define     CFG_PDWN32x32_MASK			0x00000008
+#define     CFG_PDWN16x66(pdwn)			((pdwn) << 2)
+#define     CFG_PDWN16x66_MASK			0x00000004
+#define     CFG_PDWN32x66(pdwn)			((pdwn) << 1)
+#define     CFG_PDWN32x66_MASK			0x00000002
+#define     CFG_PDWN64x66(pdwn)			(pdwn)
+#define     CFG_PDWN64x66_MASK			0x00000001
+
+/* Smart or Dumb Panel Clock Divider */
+#define LCD_CFG_SCLK_DIV			0x01A8
+#define     SCLK_SOURCE_SELECT(src)		((src) << 31)
+#define     SCLK_SOURCE_SELECT_MASK		0x80000000
+#define     CLK_FRACDIV(frac)			((frac) << 16)
+#define     CLK_FRACDIV_MASK			0x0FFF0000
+#define     CLK_INT_DIV(div)			(div)
+#define     CLK_INT_DIV_MASK			0x0000FFFF
+
+/* Video Contrast Register */
+#define LCD_SPU_CONTRAST			0x01AC
+#define     CFG_BRIGHTNESS(bright)		((bright) << 16)
+#define     CFG_BRIGHTNESS_MASK			0xFFFF0000
+#define     CFG_CONTRAST(contrast)		(contrast)
+#define     CFG_CONTRAST_MASK			0x0000FFFF
+
+/* Video Saturation Register */
+#define LCD_SPU_SATURATION			0x01B0
+#define     CFG_C_MULTS(mult)			((mult) << 16)
+#define     CFG_C_MULTS_MASK			0xFFFF0000
+#define     CFG_SATURATION(sat)			(sat)
+#define     CFG_SATURATION_MASK			0x0000FFFF
+
+/* Video Hue Adjust Register */
+#define LCD_SPU_CBSH_HUE			0x01B4
+#define     CFG_SIN0(sin0)			((sin0) << 16)
+#define     CFG_SIN0_MASK			0xFFFF0000
+#define     CFG_COS0(con0)			(con0)
+#define     CFG_COS0_MASK			0x0000FFFF
+
+/* Dump LCD Panel Control Register */
+#define LCD_SPU_DUMB_CTRL			0x01B8
+#define     CFG_DUMBMODE(mode)			((mode) << 28)
+#define     CFG_DUMBMODE_MASK			0xF0000000
+#define     CFG_LCDGPIO_O(data)			((data) << 20)
+#define     CFG_LCDGPIO_O_MASK			0x0FF00000
+#define     CFG_LCDGPIO_ENA(gpio)		((gpio) << 12)
+#define     CFG_LCDGPIO_ENA_MASK		0x000FF000
+#define     CFG_BIAS_OUT(bias)			((bias) << 8)
+#define     CFG_BIAS_OUT_MASK			0x00000100
+#define     CFG_REVERSE_RGB(rRGB)		((rRGB) << 7)
+#define     CFG_REVERSE_RGB_MASK		0x00000080
+#define     CFG_INV_COMPBLANK(blank)		((blank) << 6)
+#define     CFG_INV_COMPBLANK_MASK		0x00000040
+#define     CFG_INV_COMPSYNC(sync)		((sync) << 5)
+#define     CFG_INV_COMPSYNC_MASK		0x00000020
+#define     CFG_INV_HENA(hena)			((hena) << 4)
+#define     CFG_INV_HENA_MASK			0x00000010
+#define     CFG_INV_VSYNC(vsync)		((vsync) << 3)
+#define     CFG_INV_VSYNC_MASK			0x00000008
+#define     CFG_INV_HSYNC(hsync)		((hsync) << 2)
+#define     CFG_INV_HSYNC_MASK			0x00000004
+#define     CFG_INV_PCLK(pclk)			((pclk) << 1)
+#define     CFG_INV_PCLK_MASK			0x00000002
+#define     CFG_DUMB_ENA(dumb)			(dumb)
+#define     CFG_DUMB_ENA_MASK			0x00000001
+
+/* LCD I/O Pads Control Register */
+#define SPU_IOPAD_CONTROL			0x01BC
+#define     CFG_GRA_VM_ENA(vm)			((vm) << 15)        /* gfx */
+#define     CFG_GRA_VM_ENA_MASK			0x00008000
+#define     CFG_DMA_VM_ENA(vm)			((vm) << 13)	/* video */
+#define     CFG_DMA_VM_ENA_MASK			0x00002000
+#define     CFG_CMD_VM_ENA(vm)			((vm) << 13)
+#define     CFG_CMD_VM_ENA_MASK			0x00000800
+#define     CFG_CSC(csc)			((csc) << 8)	/* csc */
+#define     CFG_CSC_MASK			0x00000300
+#define     CFG_AXICTRL(axi)			((axi) << 4)
+#define     CFG_AXICTRL_MASK			0x000000F0
+#define     CFG_IOPADMODE(iopad)		(iopad)
+#define     CFG_IOPADMODE_MASK			0x0000000F
+
+/* LCD Interrupt Control Register */
+#define SPU_IRQ_ENA				0x01C0
+#define     DMA_FRAME_IRQ0_ENA(irq)		((irq) << 31)
+#define     DMA_FRAME_IRQ0_ENA_MASK		0x80000000
+#define     DMA_FRAME_IRQ1_ENA(irq)		((irq) << 30)
+#define     DMA_FRAME_IRQ1_ENA_MASK		0x40000000
+#define     DMA_FF_UNDERFLOW_ENA(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_ENA_MASK		0x20000000
+#define     GRA_FRAME_IRQ0_ENA(irq)		((irq) << 27)
+#define     GRA_FRAME_IRQ0_ENA_MASK		0x08000000
+#define     GRA_FRAME_IRQ1_ENA(irq)		((irq) << 26)
+#define     GRA_FRAME_IRQ1_ENA_MASK		0x04000000
+#define     GRA_FF_UNDERFLOW_ENA(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_ENA_MASK		0x02000000
+#define     VSYNC_IRQ_ENA(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_ENA_MASK			0x00800000
+#define     DUMB_FRAMEDONE_ENA(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_ENA_MASK		0x00400000
+#define     TWC_FRAMEDONE_ENA(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_ENA_MASK		0x00200000
+#define     HWC_FRAMEDONE_ENA(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_ENA_MASK		0x00100000
+#define     SLV_IRQ_ENA(irq)			((irq) << 19)
+#define     SLV_IRQ_ENA_MASK			0x00080000
+#define     SPI_IRQ_ENA(irq)			((irq) << 18)
+#define     SPI_IRQ_ENA_MASK			0x00040000
+#define     PWRDN_IRQ_ENA(irq)			((irq) << 17)
+#define     PWRDN_IRQ_ENA_MASK			0x00020000
+#define     ERR_IRQ_ENA(irq)			((irq) << 16)
+#define     ERR_IRQ_ENA_MASK			0x00010000
+#define     CLEAN_SPU_IRQ_ISR(irq)		(irq)
+#define     CLEAN_SPU_IRQ_ISR_MASK		0x0000FFFF
+
+/* LCD Interrupt Status Register */
+#define SPU_IRQ_ISR				0x01C4
+#define     DMA_FRAME_IRQ0(irq)			((irq) << 31)
+#define     DMA_FRAME_IRQ0_MASK			0x80000000
+#define     DMA_FRAME_IRQ1(irq)			((irq) << 30)
+#define     DMA_FRAME_IRQ1_MASK			0x40000000
+#define     DMA_FF_UNDERFLOW(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_MASK		0x20000000
+#define     GRA_FRAME_IRQ0(irq)			((irq) << 27)
+#define     GRA_FRAME_IRQ0_MASK			0x08000000
+#define     GRA_FRAME_IRQ1(irq)			((irq) << 26)
+#define     GRA_FRAME_IRQ1_MASK			0x04000000
+#define     GRA_FF_UNDERFLOW(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_MASK		0x02000000
+#define     VSYNC_IRQ(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_MASK			0x00800000
+#define     DUMB_FRAMEDONE(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_MASK			0x00400000
+#define     TWC_FRAMEDONE(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_MASK			0x00200000
+#define     HWC_FRAMEDONE(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_MASK			0x00100000
+#define     SLV_IRQ(irq)			((irq) << 19)
+#define     SLV_IRQ_MASK			0x00080000
+#define     SPI_IRQ(irq)			((irq) << 18)
+#define     SPI_IRQ_MASK			0x00040000
+#define     PWRDN_IRQ(irq)			((irq) << 17)
+#define     PWRDN_IRQ_MASK			0x00020000
+#define     ERR_IRQ(irq)			((irq) << 16)
+#define     ERR_IRQ_MASK			0x00010000
+/* read-only */
+#define     DMA_FRAME_IRQ0_LEVEL_MASK		0x00008000
+#define     DMA_FRAME_IRQ1_LEVEL_MASK		0x00004000
+#define     DMA_FRAME_CNT_ISR_MASK		0x00003000
+#define     GRA_FRAME_IRQ0_LEVEL_MASK		0x00000800
+#define     GRA_FRAME_IRQ1_LEVEL_MASK		0x00000400
+#define     GRA_FRAME_CNT_ISR_MASK		0x00000300
+#define     VSYNC_IRQ_LEVEL_MASK		0x00000080
+#define     DUMB_FRAMEDONE_LEVEL_MASK		0x00000040
+#define     TWC_FRAMEDONE_LEVEL_MASK		0x00000020
+#define     HWC_FRAMEDONE_LEVEL_MASK		0x00000010
+#define     SLV_FF_EMPTY_MASK			0x00000008
+#define     DMA_FF_ALLEMPTY_MASK		0x00000004
+#define     GRA_FF_ALLEMPTY_MASK		0x00000002
+#define     PWRDN_IRQ_LEVEL_MASK		0x00000001
+
+
+/*
+ * defined Video Memory Color format for DMA control 0 register
+ * DMA0 bit[23:20]
+ */
+#define VMODE_RGB565		0x0
+#define VMODE_RGB1555		0x1
+#define VMODE_RGB888PACKED	0x2
+#define VMODE_RGB888UNPACKED	0x3
+#define VMODE_RGBA888		0x4
+#define VMODE_YUV422PACKED	0x5
+#define VMODE_YUV422PLANAR	0x6
+#define VMODE_YUV420PLANAR	0x7
+#define VMODE_SMPNCMD		0x8
+#define VMODE_PALETTE4BIT	0x9
+#define VMODE_PALETTE8BIT	0xa
+#define VMODE_RESERVED		0xb
+
+/*
+ * defined Graphic Memory Color format for DMA control 0 register
+ * DMA0 bit[19:16]
+ */
+#define GMODE_RGB565		0x0
+#define GMODE_RGB1555		0x1
+#define GMODE_RGB888PACKED	0x2
+#define GMODE_RGB888UNPACKED	0x3
+#define GMODE_RGBA888		0x4
+#define GMODE_YUV422PACKED	0x5
+#define GMODE_YUV422PLANAR	0x6
+#define GMODE_YUV420PLANAR	0x7
+#define GMODE_SMPNCMD		0x8
+#define GMODE_PALETTE4BIT	0x9
+#define GMODE_PALETTE8BIT	0xa
+#define GMODE_RESERVED		0xb
+
+/*
+ * define for DMA control 1 register
+ */
+#define DMA1_FRAME_TRIG		31 /* bit location */
+#define DMA1_VSYNC_MODE		28
+#define DMA1_VSYNC_INV		27
+#define DMA1_CKEY		24
+#define DMA1_CARRY		23
+#define DMA1_LNBUF_ENA		22
+#define DMA1_GATED_ENA		21
+#define DMA1_PWRDN_ENA		20
+#define DMA1_DSCALE		18
+#define DMA1_ALPHA_MODE		16
+#define DMA1_ALPHA		08
+#define DMA1_PXLCMD		00
+
+/*
+ * defined for Configure Dumb Mode
+ * DUMB LCD Panel bit[31:28]
+ */
+#define DUMB16_RGB565_0		0x0
+#define DUMB16_RGB565_1		0x1
+#define DUMB18_RGB666_0		0x2
+#define DUMB18_RGB666_1		0x3
+#define DUMB12_RGB444_0		0x4
+#define DUMB12_RGB444_1		0x5
+#define DUMB24_RGB888_0		0x6
+#define DUMB_BLANK		0x7
+
+/*
+ * defined for Configure I/O Pin Allocation Mode
+ * LCD LCD I/O Pads control register bit[3:0]
+ */
+#define IOPAD_DUMB24		0x0
+#define IOPAD_DUMB18SPI		0x1
+#define IOPAD_DUMB18GPIO	0x2
+#define IOPAD_DUMB16SPI		0x3
+#define IOPAD_DUMB16GPIO	0x4
+#define IOPAD_DUMB12		0x5
+#define IOPAD_SMART18SPI	0x6
+#define IOPAD_SMART16SPI	0x7
+#define IOPAD_SMART8BOTH	0x8
+
+#endif /* __PXA168FB_H__ */
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 89f231dc443..ff43c888502 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -1315,7 +1315,6 @@ static int __devinit tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan,
 
 	strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.class		= I2C_CLASS_TV_ANALOG;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= dev;
 	chan->algo.setsda		= tdfxfb_i2c_setsda;
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 421770b5e6a..ca5b4643a40 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -45,7 +45,7 @@ static struct fb_fix_screeninfo uvesafb_fix __devinitdata = {
 static int mtrr		__devinitdata = 3; /* enable mtrr by default */
 static int blank	= 1;		   /* enable blanking by default */
 static int ypan		= 1; 		 /* 0: scroll, 1: ypan, 2: ywrap */
-static int pmi_setpal	__devinitdata = 1; /* use PMI for palette changes */
+static bool pmi_setpal	__devinitdata = true; /* use PMI for palette changes */
 static int nocrtc	__devinitdata; /* ignore CRTC settings */
 static int noedid	__devinitdata; /* don't try DDC transfers */
 static int vram_remap	__devinitdata; /* set amt. of memory to be used */
@@ -2002,11 +2002,7 @@ static void __devexit uvesafb_exit(void)
 
 module_exit(uvesafb_exit);
 
-static int param_get_scroll(char *buffer, struct kernel_param *kp)
-{
-	return 0;
-}
-
+#define param_get_scroll NULL
 static int param_set_scroll(const char *val, struct kernel_param *kp)
 {
 	ypan = 0;
@@ -2017,6 +2013,8 @@ static int param_set_scroll(const char *val, struct kernel_param *kp)
 		ypan = 1;
 	else if (!strcmp(val, "ywrap"))
 		ypan = 2;
+	else
+		return -EINVAL;
 
 	return 0;
 }
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 40a3a2afbfe..7a868bd16e0 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -1,13 +1,12 @@
 /*
- * xilinxfb.c
- *
- * Xilinx TFT LCD frame buffer driver
+ * Xilinx TFT frame buffer driver
  *
  * Author: MontaVista Software, Inc.
  *         source@mvista.com
  *
  * 2002-2007 (c) MontaVista Software, Inc.
  * 2007 (c) Secret Lab Technologies, Ltd.
+ * 2009 (c) Xilinx Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -24,33 +23,38 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#if defined(CONFIG_OF)
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#endif
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/xilinxfb.h>
+#include <asm/dcr.h>
 
 #define DRIVER_NAME		"xilinxfb"
-#define DRIVER_DESCRIPTION	"Xilinx TFT LCD frame buffer driver"
+
 
 /*
  * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
- * the VGA port on the Xilinx ML40x board. This is a hardware display controller
- * for a 640x480 resolution TFT or VGA screen.
+ * the VGA port on the Xilinx ML40x board. This is a hardware display
+ * controller for a 640x480 resolution TFT or VGA screen.
  *
  * The interface to the framebuffer is nice and simple.  There are two
  * control registers.  The first tells the LCD interface where in memory
  * the frame buffer is (only the 11 most significant bits are used, so
  * don't start thinking about scrolling).  The second allows the LCD to
  * be turned on or off as well as rotated 180 degrees.
+ *
+ * In case of direct PLB access the second control register will be at
+ * an offset of 4 as compared to the DCR access where the offset is 1
+ * i.e. REG_CTRL. So this is taken care in the function
+ * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * direct PLB access.
  */
 #define NUM_REGS	2
 #define REG_FB_ADDR	0
@@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
 	.activate =	FB_ACTIVATE_NOW
 };
 
+
+#define PLB_ACCESS_FLAG	0x1		/* 1 = PLB, 0 = DCR */
+
 struct xilinxfb_drvdata {
 
 	struct fb_info	info;		/* FB driver info record */
 
-	u32		regs_phys;	/* phys. address of the control registers */
-	u32 __iomem	*regs;		/* virt. address of the control registers */
+	phys_addr_t	regs_phys;	/* phys. address of the control
+						registers */
+	void __iomem	*regs;		/* virt. address of the control
+						registers */
+
+	dcr_host_t      dcr_host;
+	unsigned int    dcr_start;
+	unsigned int    dcr_len;
 
 	void		*fb_virt;	/* virt. address of the frame buffer */
 	dma_addr_t	fb_phys;	/* phys. address of the frame buffer */
 	int		fb_alloced;	/* Flag, was the fb memory alloced? */
 
+	u8 		flags;		/* features of the driver */
+
 	u32		reg_ctrl_default;
 
 	u32		pseudo_palette[PALETTE_ENTRIES_NO];
@@ -128,14 +143,19 @@ struct xilinxfb_drvdata {
 	container_of(_info, struct xilinxfb_drvdata, info)
 
 /*
- * The LCD controller has DCR interface to its registers, but all
- * the boards and configurations the driver has been tested with
- * use opb2dcr bridge. So the registers are seen as memory mapped.
- * This macro is to make it simple to add the direct DCR access
- * when it's needed.
+ * The XPS TFT Controller can be accessed through PLB or DCR interface.
+ * To perform the read/write on the registers we need to check on
+ * which bus its connected and call the appropriate write API.
  */
-#define xilinx_fb_out_be32(driverdata, offset, val) \
-	out_be32(driverdata->regs + offset, val)
+static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+				u32 val)
+{
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		out_be32(drvdata->regs + (offset << 2), val);
+	else
+		dcr_write(drvdata->dcr_host, offset, val);
+
+}
 
 static int
 xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
@@ -203,35 +223,34 @@ static struct fb_ops xilinxfb_ops =
  * Bus independent setup/teardown
  */
 
-static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
+static int xilinxfb_assign(struct device *dev,
+			   struct xilinxfb_drvdata *drvdata,
+			   unsigned long physaddr,
 			   struct xilinxfb_platform_data *pdata)
 {
-	struct xilinxfb_drvdata *drvdata;
 	int rc;
 	int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
 
-	/* Allocate the driver data region */
-	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
-	if (!drvdata) {
-		dev_err(dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
-	}
-	dev_set_drvdata(dev, drvdata);
-
-	/* Map the control registers in */
-	if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-			physaddr);
-		rc = -ENODEV;
-		goto err_region;
-	}
-	drvdata->regs_phys = physaddr;
-	drvdata->regs = ioremap(physaddr, 8);
-	if (!drvdata->regs) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-			physaddr);
-		rc = -ENODEV;
-		goto err_map;
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		/*
+		 * Map the control registers in if the controller
+		 * is on direct PLB interface.
+		 */
+		if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
+			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+				physaddr);
+			rc = -ENODEV;
+			goto err_region;
+		}
+
+		drvdata->regs_phys = physaddr;
+		drvdata->regs = ioremap(physaddr, 8);
+		if (!drvdata->regs) {
+			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+				physaddr);
+			rc = -ENODEV;
+			goto err_map;
+		}
 	}
 
 	/* Allocate the framebuffer memory */
@@ -247,7 +266,10 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 	if (!drvdata->fb_virt) {
 		dev_err(dev, "Could not allocate frame buffer memory\n");
 		rc = -ENOMEM;
-		goto err_fbmem;
+		if (drvdata->flags & PLB_ACCESS_FLAG)
+			goto err_fbmem;
+		else
+			goto err_region;
 	}
 
 	/* Clear (turn to black) the framebuffer */
@@ -260,7 +282,8 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 	drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 	if (pdata->rotate_screen)
 		drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
-	xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+	xilinx_fb_out_be32(drvdata, REG_CTRL,
+					drvdata->reg_ctrl_default);
 
 	/* Fill struct fb_info */
 	drvdata->info.device = dev;
@@ -296,11 +319,14 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 		goto err_regfb;
 	}
 
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		/* Put a banner in the log (for DEBUG) */
+		dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
+					drvdata->regs);
+	}
 	/* Put a banner in the log (for DEBUG) */
-	dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
-	dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
-		(unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
-		fbsize);
+	dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
+		(void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
 
 	return 0;	/* success */
 
@@ -311,14 +337,19 @@ err_cmap:
 	if (drvdata->fb_alloced)
 		dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
 			drvdata->fb_phys);
+	else
+		iounmap(drvdata->fb_virt);
+
 	/* Turn off the display */
 	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
 
 err_fbmem:
-	iounmap(drvdata->regs);
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		iounmap(drvdata->regs);
 
 err_map:
-	release_mem_region(physaddr, 8);
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		release_mem_region(physaddr, 8);
 
 err_region:
 	kfree(drvdata);
@@ -342,12 +373,18 @@ static int xilinxfb_release(struct device *dev)
 	if (drvdata->fb_alloced)
 		dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
 				  drvdata->fb_virt, drvdata->fb_phys);
+	else
+		iounmap(drvdata->fb_virt);
 
 	/* Turn off the display */
 	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
-	iounmap(drvdata->regs);
 
-	release_mem_region(drvdata->regs_phys, 8);
+	/* Release the resources, as allocated based on interface */
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		iounmap(drvdata->regs);
+		release_mem_region(drvdata->regs_phys, 8);
+	} else
+		dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
 
 	kfree(drvdata);
 	dev_set_drvdata(dev, NULL);
@@ -356,77 +393,57 @@ static int xilinxfb_release(struct device *dev)
 }
 
 /* ---------------------------------------------------------------------
- * Platform bus binding
- */
-
-static int
-xilinxfb_platform_probe(struct platform_device *pdev)
-{
-	struct xilinxfb_platform_data *pdata;
-	struct resource *res;
-
-	/* Find the registers address */
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Couldn't get registers resource\n");
-		return -ENODEV;
-	}
-
-	/* If a pdata structure is provided, then extract the parameters */
-	pdata = &xilinx_fb_default_pdata;
-	if (pdev->dev.platform_data) {
-		pdata = pdev->dev.platform_data;
-		if (!pdata->xres)
-			pdata->xres = xilinx_fb_default_pdata.xres;
-		if (!pdata->yres)
-			pdata->yres = xilinx_fb_default_pdata.yres;
-		if (!pdata->xvirt)
-			pdata->xvirt = xilinx_fb_default_pdata.xvirt;
-		if (!pdata->yvirt)
-			pdata->yvirt = xilinx_fb_default_pdata.yvirt;
-	}
-
-	return xilinxfb_assign(&pdev->dev, res->start, pdata);
-}
-
-static int
-xilinxfb_platform_remove(struct platform_device *pdev)
-{
-	return xilinxfb_release(&pdev->dev);
-}
-
-
-static struct platform_driver xilinxfb_platform_driver = {
-	.probe		= xilinxfb_platform_probe,
-	.remove		= xilinxfb_platform_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = DRIVER_NAME,
-	},
-};
-
-/* ---------------------------------------------------------------------
  * OF bus binding
  */
 
-#if defined(CONFIG_OF)
 static int __devinit
 xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct resource res;
 	const u32 *prop;
+	u32 *p;
+	u32 tft_access;
 	struct xilinxfb_platform_data pdata;
+	struct resource res;
 	int size, rc;
+	int start = 0, len = 0;
+	dcr_host_t dcr_host;
+	struct xilinxfb_drvdata *drvdata;
 
 	/* Copy with the default pdata (not a ptr reference!) */
 	pdata = xilinx_fb_default_pdata;
 
 	dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
 
-	rc = of_address_to_resource(op->node, 0, &res);
-	if (rc) {
-		dev_err(&op->dev, "invalid address\n");
-		return rc;
+	/*
+	 * To check whether the core is connected directly to DCR or PLB
+	 * interface and initialize the tft_access accordingly.
+	 */
+	p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
+
+	if (p)
+		tft_access = *p;
+	else
+		tft_access = 0;		/* For backward compatibility */
+
+	/*
+	 * Fill the resource structure if its direct PLB interface
+	 * otherwise fill the dcr_host structure.
+	 */
+	if (tft_access) {
+		rc = of_address_to_resource(op->node, 0, &res);
+		if (rc) {
+			dev_err(&op->dev, "invalid address\n");
+			return -ENODEV;
+		}
+
+	} else {
+		start = dcr_resource_start(op->node, 0);
+		len = dcr_resource_len(op->node, 0);
+		dcr_host = dcr_map(op->node, start, len);
+		if (!DCR_MAP_OK(dcr_host)) {
+			dev_err(&op->dev, "invalid address\n");
+			return -ENODEV;
+		}
 	}
 
 	prop = of_get_property(op->node, "phys-size", &size);
@@ -450,7 +467,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 	if (of_find_property(op->node, "rotate-display", NULL))
 		pdata.rotate_screen = 1;
 
-	return xilinxfb_assign(&op->dev, res.start, &pdata);
+	/* Allocate the driver data region */
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata) {
+		dev_err(&op->dev, "Couldn't allocate device private record\n");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(&op->dev, drvdata);
+
+	if (tft_access)
+		drvdata->flags |= PLB_ACCESS_FLAG;
+
+	/* Arguments are passed based on the interface */
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
+	} else {
+		drvdata->dcr_start = start;
+		drvdata->dcr_len = len;
+		drvdata->dcr_host = dcr_host;
+		return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
+	}
 }
 
 static int __devexit xilinxfb_of_remove(struct of_device *op)
@@ -460,7 +496,9 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
 
 /* Match table for of_platform binding */
 static struct of_device_id xilinxfb_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-tft-1.00.a", },
 	{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
+	{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
@@ -476,22 +514,6 @@ static struct of_platform_driver xilinxfb_of_driver = {
 	},
 };
 
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init xilinxfb_of_register(void)
-{
-	pr_debug("xilinxfb: calling of_register_platform_driver()\n");
-	return of_register_platform_driver(&xilinxfb_of_driver);
-}
-
-static inline void __exit xilinxfb_of_unregister(void)
-{
-	of_unregister_platform_driver(&xilinxfb_of_driver);
-}
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __init xilinxfb_of_register(void) { return 0; }
-static inline void __exit xilinxfb_of_unregister(void) { }
-#endif /* CONFIG_OF */
 
 /* ---------------------------------------------------------------------
  * Module setup and teardown
@@ -500,28 +522,18 @@ static inline void __exit xilinxfb_of_unregister(void) { }
 static int __init
 xilinxfb_init(void)
 {
-	int rc;
-	rc = xilinxfb_of_register();
-	if (rc)
-		return rc;
-
-	rc = platform_driver_register(&xilinxfb_platform_driver);
-	if (rc)
-		xilinxfb_of_unregister();
-
-	return rc;
+	return of_register_platform_driver(&xilinxfb_of_driver);
 }
 
 static void __exit
 xilinxfb_cleanup(void)
 {
-	platform_driver_unregister(&xilinxfb_platform_driver);
-	xilinxfb_of_unregister();
+	of_unregister_platform_driver(&xilinxfb_of_driver);
 }
 
 module_init(xilinxfb_init);
 module_exit(xilinxfb_cleanup);
 
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 018c070a357..3a43ebf83a4 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -31,21 +31,37 @@ static ssize_t modalias_show(struct device *_d,
 	return sprintf(buf, "virtio:d%08Xv%08X\n",
 		       dev->id.device, dev->id.vendor);
 }
+static ssize_t features_show(struct device *_d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct virtio_device *dev = container_of(_d, struct virtio_device, dev);
+	unsigned int i;
+	ssize_t len = 0;
+
+	/* We actually represent this as a bitstring, as it could be
+	 * arbitrary length in future. */
+	for (i = 0; i < ARRAY_SIZE(dev->features)*BITS_PER_LONG; i++)
+		len += sprintf(buf+len, "%c",
+			       test_bit(i, dev->features) ? '1' : '0');
+	len += sprintf(buf+len, "\n");
+	return len;
+}
 static struct device_attribute virtio_dev_attrs[] = {
 	__ATTR_RO(device),
 	__ATTR_RO(vendor),
 	__ATTR_RO(status),
 	__ATTR_RO(modalias),
+	__ATTR_RO(features),
 	__ATTR_NULL
 };
 
 static inline int virtio_id_match(const struct virtio_device *dev,
 				  const struct virtio_device_id *id)
 {
-	if (id->device != dev->id.device)
+	if (id->device != dev->id.device && id->device != VIRTIO_DEV_ANY_ID)
 		return 0;
 
-	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor != dev->id.vendor;
+	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor == dev->id.vendor;
 }
 
 /* This looks through all the IDs a driver claims to support.  If any of them
@@ -118,13 +134,14 @@ static int virtio_dev_probe(struct device *_d)
 		if (device_features & (1 << i))
 			set_bit(i, dev->features);
 
+	dev->config->finalize_features(dev);
+
 	err = drv->probe(dev);
 	if (err)
 		add_status(dev, VIRTIO_CONFIG_S_FAILED);
-	else {
-		dev->config->finalize_features(dev);
+	else
 		add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
-	}
+
 	return err;
 }
 
@@ -185,6 +202,8 @@ int register_virtio_device(struct virtio_device *dev)
 	/* Acknowledge that we've seen the device. */
 	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 
+	INIT_LIST_HEAD(&dev->vqs);
+
 	/* device_register() causes the bus infrastructure to look for a
 	 * matching driver. */
 	err = device_register(&dev->dev);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 9c76a061a04..26b27826479 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -204,6 +204,9 @@ static int balloon(void *_vballoon)
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
+	struct virtqueue *vqs[2];
+	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack };
+	const char *names[] = { "inflate", "deflate" };
 	int err;
 
 	vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
@@ -218,22 +221,17 @@ static int virtballoon_probe(struct virtio_device *vdev)
 	vb->vdev = vdev;
 
 	/* We expect two virtqueues. */
-	vb->inflate_vq = vdev->config->find_vq(vdev, 0, balloon_ack);
-	if (IS_ERR(vb->inflate_vq)) {
-		err = PTR_ERR(vb->inflate_vq);
+	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	if (err)
 		goto out_free_vb;
-	}
 
-	vb->deflate_vq = vdev->config->find_vq(vdev, 1, balloon_ack);
-	if (IS_ERR(vb->deflate_vq)) {
-		err = PTR_ERR(vb->deflate_vq);
-		goto out_del_inflate_vq;
-	}
+	vb->inflate_vq = vqs[0];
+	vb->deflate_vq = vqs[1];
 
 	vb->thread = kthread_run(balloon, vb, "vballoon");
 	if (IS_ERR(vb->thread)) {
 		err = PTR_ERR(vb->thread);
-		goto out_del_deflate_vq;
+		goto out_del_vqs;
 	}
 
 	vb->tell_host_first
@@ -241,10 +239,8 @@ static int virtballoon_probe(struct virtio_device *vdev)
 
 	return 0;
 
-out_del_deflate_vq:
-	vdev->config->del_vq(vb->deflate_vq);
-out_del_inflate_vq:
-	vdev->config->del_vq(vb->inflate_vq);
+out_del_vqs:
+	vdev->config->del_vqs(vdev);
 out_free_vb:
 	kfree(vb);
 out:
@@ -264,8 +260,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
 	/* Now we reset the device so we can clean up the queues. */
 	vdev->config->reset(vdev);
 
-	vdev->config->del_vq(vb->deflate_vq);
-	vdev->config->del_vq(vb->inflate_vq);
+	vdev->config->del_vqs(vdev);
 	kfree(vb);
 }
 
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 330aacbdec1..193c8f0e5cc 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -42,6 +42,26 @@ struct virtio_pci_device
 	/* a list of queues so we can dispatch IRQs */
 	spinlock_t lock;
 	struct list_head virtqueues;
+
+	/* MSI-X support */
+	int msix_enabled;
+	int intx_enabled;
+	struct msix_entry *msix_entries;
+	/* Name strings for interrupts. This size should be enough,
+	 * and I'm too lazy to allocate each name separately. */
+	char (*msix_names)[256];
+	/* Number of available vectors */
+	unsigned msix_vectors;
+	/* Vectors allocated */
+	unsigned msix_used_vectors;
+};
+
+/* Constants for MSI-X */
+/* Use first vector for configuration changes, second and the rest for
+ * virtqueues Thus, we need at least 2 vectors for MSI. */
+enum {
+	VP_MSIX_CONFIG_VECTOR = 0,
+	VP_MSIX_VQ_VECTOR = 1,
 };
 
 struct virtio_pci_vq_info
@@ -60,6 +80,9 @@ struct virtio_pci_vq_info
 
 	/* the list node for the virtqueues list */
 	struct list_head node;
+
+	/* MSI-X vector (or none) */
+	unsigned vector;
 };
 
 /* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
@@ -109,7 +132,8 @@ static void vp_get(struct virtio_device *vdev, unsigned offset,
 		   void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
 	u8 *ptr = buf;
 	int i;
 
@@ -123,7 +147,8 @@ static void vp_set(struct virtio_device *vdev, unsigned offset,
 		   const void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
 	const u8 *ptr = buf;
 	int i;
 
@@ -164,6 +189,37 @@ static void vp_notify(struct virtqueue *vq)
 	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
 }
 
+/* Handle a configuration change: Tell driver if it wants to know. */
+static irqreturn_t vp_config_changed(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	struct virtio_driver *drv;
+	drv = container_of(vp_dev->vdev.dev.driver,
+			   struct virtio_driver, driver);
+
+	if (drv && drv->config_changed)
+		drv->config_changed(&vp_dev->vdev);
+	return IRQ_HANDLED;
+}
+
+/* Notify all virtqueues on an interrupt. */
+static irqreturn_t vp_vring_interrupt(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	struct virtio_pci_vq_info *info;
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vp_dev->lock, flags);
+	list_for_each_entry(info, &vp_dev->virtqueues, node) {
+		if (vring_interrupt(irq, info->vq) == IRQ_HANDLED)
+			ret = IRQ_HANDLED;
+	}
+	spin_unlock_irqrestore(&vp_dev->lock, flags);
+
+	return ret;
+}
+
 /* A small wrapper to also acknowledge the interrupt when it's handled.
  * I really need an EIO hook for the vring so I can ack the interrupt once we
  * know that we'll be handling the IRQ but before we invoke the callback since
@@ -173,9 +229,6 @@ static void vp_notify(struct virtqueue *vq)
 static irqreturn_t vp_interrupt(int irq, void *opaque)
 {
 	struct virtio_pci_device *vp_dev = opaque;
-	struct virtio_pci_vq_info *info;
-	irqreturn_t ret = IRQ_NONE;
-	unsigned long flags;
 	u8 isr;
 
 	/* reading the ISR has the effect of also clearing it so it's very
@@ -187,34 +240,137 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 		return IRQ_NONE;
 
 	/* Configuration change?  Tell driver if it wants to know. */
-	if (isr & VIRTIO_PCI_ISR_CONFIG) {
-		struct virtio_driver *drv;
-		drv = container_of(vp_dev->vdev.dev.driver,
-				   struct virtio_driver, driver);
+	if (isr & VIRTIO_PCI_ISR_CONFIG)
+		vp_config_changed(irq, opaque);
 
-		if (drv && drv->config_changed)
-			drv->config_changed(&vp_dev->vdev);
+	return vp_vring_interrupt(irq, opaque);
+}
+
+static void vp_free_vectors(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	int i;
+
+	if (vp_dev->intx_enabled) {
+		free_irq(vp_dev->pci_dev->irq, vp_dev);
+		vp_dev->intx_enabled = 0;
 	}
 
-	spin_lock_irqsave(&vp_dev->lock, flags);
-	list_for_each_entry(info, &vp_dev->virtqueues, node) {
-		if (vring_interrupt(irq, info->vq) == IRQ_HANDLED)
-			ret = IRQ_HANDLED;
+	for (i = 0; i < vp_dev->msix_used_vectors; ++i)
+		free_irq(vp_dev->msix_entries[i].vector, vp_dev);
+	vp_dev->msix_used_vectors = 0;
+
+	if (vp_dev->msix_enabled) {
+		/* Disable the vector used for configuration */
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		/* Flush the write out to device */
+		ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+
+		vp_dev->msix_enabled = 0;
+		pci_disable_msix(vp_dev->pci_dev);
 	}
-	spin_unlock_irqrestore(&vp_dev->lock, flags);
+}
 
-	return ret;
+static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
+			  int *options, int noptions)
+{
+	int i;
+	for (i = 0; i < noptions; ++i)
+		if (!pci_enable_msix(dev, entries, options[i]))
+			return options[i];
+	return -EBUSY;
+}
+
+static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	const char *name = dev_name(&vp_dev->vdev.dev);
+	unsigned i, v;
+	int err = -ENOMEM;
+	/* We want at most one vector per queue and one for config changes.
+	 * Fallback to separate vectors for config and a shared for queues.
+	 * Finally fall back to regular interrupts. */
+	int options[] = { max_vqs + 1, 2 };
+	int nvectors = max(options[0], options[1]);
+
+	vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
+				       GFP_KERNEL);
+	if (!vp_dev->msix_entries)
+		goto error_entries;
+	vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
+				     GFP_KERNEL);
+	if (!vp_dev->msix_names)
+		goto error_names;
+
+	for (i = 0; i < nvectors; ++i)
+		vp_dev->msix_entries[i].entry = i;
+
+	err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
+			     options, ARRAY_SIZE(options));
+	if (err < 0) {
+		/* Can't allocate enough MSI-X vectors, use regular interrupt */
+		vp_dev->msix_vectors = 0;
+		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+				  IRQF_SHARED, name, vp_dev);
+		if (err)
+			goto error_irq;
+		vp_dev->intx_enabled = 1;
+	} else {
+		vp_dev->msix_vectors = err;
+		vp_dev->msix_enabled = 1;
+
+		/* Set the vector used for configuration */
+		v = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+			 "%s-config", name);
+		err = request_irq(vp_dev->msix_entries[v].vector,
+				  vp_config_changed, 0, vp_dev->msix_names[v],
+				  vp_dev);
+		if (err)
+			goto error_irq;
+		++vp_dev->msix_used_vectors;
+
+		iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		/* Verify we had enough resources to assign the vector */
+		v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		if (v == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto error_irq;
+		}
+	}
+
+	if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+		/* Shared vector for all VQs */
+		v = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+			 "%s-virtqueues", name);
+		err = request_irq(vp_dev->msix_entries[v].vector,
+				  vp_vring_interrupt, 0, vp_dev->msix_names[v],
+				  vp_dev);
+		if (err)
+			goto error_irq;
+		++vp_dev->msix_used_vectors;
+	}
+	return 0;
+error_irq:
+	vp_free_vectors(vdev);
+	kfree(vp_dev->msix_names);
+error_names:
+	kfree(vp_dev->msix_entries);
+error_entries:
+	return err;
 }
 
-/* the config->find_vq() implementation */
 static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				    void (*callback)(struct virtqueue *vq),
+				    const char *name)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtio_pci_vq_info *info;
 	struct virtqueue *vq;
 	unsigned long flags, size;
-	u16 num;
+	u16 num, vector;
 	int err;
 
 	/* Select the queue we're interested in */
@@ -233,6 +389,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
 	info->queue_index = index;
 	info->num = num;
+	info->vector = VIRTIO_MSI_NO_VECTOR;
 
 	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
 	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -247,7 +404,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
 	/* create the vring */
 	vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN,
-				 vdev, info->queue, vp_notify, callback);
+				 vdev, info->queue, vp_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto out_activate_queue;
@@ -256,12 +413,43 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 	vq->priv = info;
 	info->vq = vq;
 
+	/* allocate per-vq vector if available and necessary */
+	if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
+		vector = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+			 "%s-%s", dev_name(&vp_dev->vdev.dev), name);
+		err = request_irq(vp_dev->msix_entries[vector].vector,
+				  vring_interrupt, 0,
+				  vp_dev->msix_names[vector], vq);
+		if (err)
+			goto out_request_irq;
+		info->vector = vector;
+		++vp_dev->msix_used_vectors;
+	} else
+		vector = VP_MSIX_VQ_VECTOR;
+
+	 if (callback && vp_dev->msix_enabled) {
+		iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		if (vector == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto out_assign;
+		}
+	}
+
 	spin_lock_irqsave(&vp_dev->lock, flags);
 	list_add(&info->node, &vp_dev->virtqueues);
 	spin_unlock_irqrestore(&vp_dev->lock, flags);
 
 	return vq;
 
+out_assign:
+	if (info->vector != VIRTIO_MSI_NO_VECTOR) {
+		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+		--vp_dev->msix_used_vectors;
+	}
+out_request_irq:
+	vring_del_virtqueue(vq);
 out_activate_queue:
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 	free_pages_exact(info->queue, size);
@@ -270,21 +458,27 @@ out_info:
 	return ERR_PTR(err);
 }
 
-/* the config->del_vq() implementation */
 static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
 	struct virtio_pci_vq_info *info = vq->priv;
-	unsigned long flags, size;
+	unsigned long size;
 
-	spin_lock_irqsave(&vp_dev->lock, flags);
-	list_del(&info->node);
-	spin_unlock_irqrestore(&vp_dev->lock, flags);
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+
+	if (info->vector != VIRTIO_MSI_NO_VECTOR)
+		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+
+	if (vp_dev->msix_enabled) {
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		/* Flush the write out to device */
+		ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+	}
 
 	vring_del_virtqueue(vq);
 
 	/* Select and deactivate the queue */
-	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 
 	size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
@@ -292,14 +486,57 @@ static void vp_del_vq(struct virtqueue *vq)
 	kfree(info);
 }
 
+/* the config->del_vqs() implementation */
+static void vp_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		vp_del_vq(vq);
+
+	vp_free_vectors(vdev);
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	int vectors = 0;
+	int i, err;
+
+	/* How many vectors would we like? */
+	for (i = 0; i < nvqs; ++i)
+		if (callbacks[i])
+			++vectors;
+
+	err = vp_request_vectors(vdev, vectors);
+	if (err)
+		goto error_request;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error_find;
+	}
+	return 0;
+
+error_find:
+	vp_del_vqs(vdev);
+
+error_request:
+	return PTR_ERR(vqs[i]);
+}
+
 static struct virtio_config_ops virtio_pci_config_ops = {
 	.get		= vp_get,
 	.set		= vp_set,
 	.get_status	= vp_get_status,
 	.set_status	= vp_set_status,
 	.reset		= vp_reset,
-	.find_vq	= vp_find_vq,
-	.del_vq		= vp_del_vq,
+	.find_vqs	= vp_find_vqs,
+	.del_vqs	= vp_del_vqs,
 	.get_features	= vp_get_features,
 	.finalize_features = vp_finalize_features,
 };
@@ -310,7 +547,7 @@ static void virtio_pci_release_dev(struct device *_d)
 	struct virtio_pci_device *vp_dev = to_vp_device(dev);
 	struct pci_dev *pci_dev = vp_dev->pci_dev;
 
-	free_irq(pci_dev->irq, vp_dev);
+	vp_del_vqs(dev);
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
 	pci_release_regions(pci_dev);
@@ -369,21 +606,13 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
 	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
 	vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
-	/* register a handler for the queue with the PCI device's interrupt */
-	err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, IRQF_SHARED,
-			  dev_name(&vp_dev->vdev.dev), vp_dev);
-	if (err)
-		goto out_set_drvdata;
-
 	/* finally register the virtio device */
 	err = register_virtio_device(&vp_dev->vdev);
 	if (err)
-		goto out_req_irq;
+		goto out_set_drvdata;
 
 	return 0;
 
-out_req_irq:
-	free_irq(pci_dev->irq, vp_dev);
 out_set_drvdata:
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5c52369ab9b..a882f260651 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -23,21 +23,30 @@
 
 #ifdef DEBUG
 /* For development, we want to crash whenever the ring is screwed. */
-#define BAD_RING(_vq, fmt...)			\
-	do { dev_err(&(_vq)->vq.vdev->dev, fmt); BUG(); } while(0)
+#define BAD_RING(_vq, fmt, args...)				\
+	do {							\
+		dev_err(&(_vq)->vq.vdev->dev,			\
+			"%s:"fmt, (_vq)->vq.name, ##args);	\
+		BUG();						\
+	} while (0)
 /* Caller is supposed to guarantee no reentry. */
 #define START_USE(_vq)						\
 	do {							\
 		if ((_vq)->in_use)				\
-			panic("in_use = %i\n", (_vq)->in_use);	\
+			panic("%s:in_use = %i\n",		\
+			      (_vq)->vq.name, (_vq)->in_use);	\
 		(_vq)->in_use = __LINE__;			\
 		mb();						\
-	} while(0)
+	} while (0)
 #define END_USE(_vq) \
 	do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0)
 #else
-#define BAD_RING(_vq, fmt...)			\
-	do { dev_err(&_vq->vq.vdev->dev, fmt); (_vq)->broken = true; } while(0)
+#define BAD_RING(_vq, fmt, args...)				\
+	do {							\
+		dev_err(&_vq->vq.vdev->dev,			\
+			"%s:"fmt, (_vq)->vq.name, ##args);	\
+		(_vq)->broken = true;				\
+	} while (0)
 #define START_USE(vq)
 #define END_USE(vq)
 #endif
@@ -52,6 +61,9 @@ struct vring_virtqueue
 	/* Other side has made a mess, don't try any more. */
 	bool broken;
 
+	/* Host supports indirect buffers */
+	bool indirect;
+
 	/* Number of free buffers */
 	unsigned int num_free;
 	/* Head of free buffer list. */
@@ -76,6 +88,55 @@ struct vring_virtqueue
 
 #define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
 
+/* Set up an indirect table of descriptors and add it to the queue. */
+static int vring_add_indirect(struct vring_virtqueue *vq,
+			      struct scatterlist sg[],
+			      unsigned int out,
+			      unsigned int in)
+{
+	struct vring_desc *desc;
+	unsigned head;
+	int i;
+
+	desc = kmalloc((out + in) * sizeof(struct vring_desc), GFP_ATOMIC);
+	if (!desc)
+		return vq->vring.num;
+
+	/* Transfer entries from the sg list into the indirect page */
+	for (i = 0; i < out; i++) {
+		desc[i].flags = VRING_DESC_F_NEXT;
+		desc[i].addr = sg_phys(sg);
+		desc[i].len = sg->length;
+		desc[i].next = i+1;
+		sg++;
+	}
+	for (; i < (out + in); i++) {
+		desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
+		desc[i].addr = sg_phys(sg);
+		desc[i].len = sg->length;
+		desc[i].next = i+1;
+		sg++;
+	}
+
+	/* Last one doesn't continue. */
+	desc[i-1].flags &= ~VRING_DESC_F_NEXT;
+	desc[i-1].next = 0;
+
+	/* We're about to use a buffer */
+	vq->num_free--;
+
+	/* Use a single buffer which doesn't continue */
+	head = vq->free_head;
+	vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT;
+	vq->vring.desc[head].addr = virt_to_phys(desc);
+	vq->vring.desc[head].len = i * sizeof(struct vring_desc);
+
+	/* Update free pointer */
+	vq->free_head = vq->vring.desc[head].next;
+
+	return head;
+}
+
 static int vring_add_buf(struct virtqueue *_vq,
 			 struct scatterlist sg[],
 			 unsigned int out,
@@ -85,12 +146,21 @@ static int vring_add_buf(struct virtqueue *_vq,
 	struct vring_virtqueue *vq = to_vvq(_vq);
 	unsigned int i, avail, head, uninitialized_var(prev);
 
+	START_USE(vq);
+
 	BUG_ON(data == NULL);
+
+	/* If the host supports indirect descriptor tables, and we have multiple
+	 * buffers, then go indirect. FIXME: tune this threshold */
+	if (vq->indirect && (out + in) > 1 && vq->num_free) {
+		head = vring_add_indirect(vq, sg, out, in);
+		if (head != vq->vring.num)
+			goto add_head;
+	}
+
 	BUG_ON(out + in > vq->vring.num);
 	BUG_ON(out + in == 0);
 
-	START_USE(vq);
-
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
@@ -127,6 +197,7 @@ static int vring_add_buf(struct virtqueue *_vq,
 	/* Update free pointer */
 	vq->free_head = i;
 
+add_head:
 	/* Set token. */
 	vq->data[head] = data;
 
@@ -170,6 +241,11 @@ static void detach_buf(struct vring_virtqueue *vq, unsigned int head)
 
 	/* Put back on free list: find end */
 	i = head;
+
+	/* Free the indirect table */
+	if (vq->vring.desc[i].flags & VRING_DESC_F_INDIRECT)
+		kfree(phys_to_virt(vq->vring.desc[i].addr));
+
 	while (vq->vring.desc[i].flags & VRING_DESC_F_NEXT) {
 		i = vq->vring.desc[i].next;
 		vq->num_free++;
@@ -284,7 +360,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *),
-				      void (*callback)(struct virtqueue *))
+				      void (*callback)(struct virtqueue *),
+				      const char *name)
 {
 	struct vring_virtqueue *vq;
 	unsigned int i;
@@ -303,14 +380,18 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 	vq->vq.callback = callback;
 	vq->vq.vdev = vdev;
 	vq->vq.vq_ops = &vring_vq_ops;
+	vq->vq.name = name;
 	vq->notify = notify;
 	vq->broken = false;
 	vq->last_used_idx = 0;
 	vq->num_added = 0;
+	list_add_tail(&vq->vq.list, &vdev->vqs);
 #ifdef DEBUG
 	vq->in_use = false;
 #endif
 
+	vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC);
+
 	/* No callback?  Tell other side not to bother us. */
 	if (!callback)
 		vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
@@ -327,6 +408,7 @@ EXPORT_SYMBOL_GPL(vring_new_virtqueue);
 
 void vring_del_virtqueue(struct virtqueue *vq)
 {
+	list_del(&vq->list);
 	kfree(to_vvq(vq));
 }
 EXPORT_SYMBOL_GPL(vring_del_virtqueue);
@@ -338,6 +420,8 @@ void vring_transport_features(struct virtio_device *vdev)
 
 	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) {
 		switch (i) {
+		case VIRTIO_RING_F_INDIRECT_DESC:
+			break;
 		default:
 			/* We don't understand this bit. */
 			clear_bit(i, vdev->features);
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9adbb4f9047..fd2c7bd9dfb 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -8,7 +8,7 @@ menuconfig W1
 	  If you want W1 support, you should say Y here.
 
 	  This W1 support can also be built as a module.  If so, the module
-	  will be called wire.ko.
+	  will be called wire.
 
 if W1
 
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 96d2f8e4c27..3195fb8b7d9 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
 	  using Matrox's G400 GPIO pins.
 
 	  This support is also available as a module.  If so, the module
-	  will be called matrox_w1.ko.
+	  will be called matrox_w1.
 
 config W1_MASTER_DS2490
 	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
 	  for example DS9490*.
 
   	  This support is also available as a module.  If so, the module
-	  will be called ds2490.ko.
+	  will be called ds2490.
 
 config W1_MASTER_DS2482
 	tristate "Maxim DS2482 I2C to 1-Wire bridge"
@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
 	  GPIO pins. This driver uses the GPIO API to control the wire.
 
 	  This support is also available as a module.  If so, the module
-	  will be called w1-gpio.ko.
+	  will be called w1-gpio.
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21da82..b166f2852a6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -231,14 +231,14 @@ config DAVINCI_WATCHDOG
 	  NOTE: once enabled, this timer cannot be disabled.
 	  Say N if you are unsure.
 
-config ORION5X_WATCHDOG
-	tristate "Orion5x watchdog"
-	depends on ARCH_ORION5X
+config ORION_WATCHDOG
+	tristate "Orion watchdog"
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD
 	help
 	  Say Y here if to include support for the watchdog timer
-	  in the Orion5x ARM SoCs.
+	  in the Marvell Orion5x and Kirkwood ARM SoCs.
 	  To compile this driver as a module, choose M here: the
-	  module will be called orion5x_wdt.
+	  module will be called orion_wdt.
 
 # AVR32 Architecture
 
@@ -531,7 +531,7 @@ config SBC8360_WDT
 	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called sbc8360.ko.
+	  module will be called sbc8360.
 
 	  Most people will say N.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7f8c56b14f5..c3afa14d5be 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
 obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index 96eb2cbe587..0c905967669 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -192,7 +192,7 @@ static int iop_wdt_release(struct inode *inode, struct file *file)
 		if (test_bit(WDT_ENABLED, &wdt_status))
 			state = wdt_disable();
 
-	/* if the timer is not disbaled reload and notify that we are still
+	/* if the timer is not disabled reload and notify that we are still
 	 * going down
 	 */
 	if (state != 0) {
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion_wdt.c
index 2cde568e4fb..2d9fb96a9ee 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -1,7 +1,7 @@
 /*
- * drivers/watchdog/orion5x_wdt.c
+ * drivers/watchdog/orion_wdt.c
  *
- * Watchdog driver for Orion5x processors
+ * Watchdog driver for Orion/Kirkwood processors
  *
  * Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
  *
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <mach/bridge-regs.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 
 /*
  * Watchdog timer block registers.
@@ -43,7 +43,7 @@ static unsigned int wdt_tclk;
 static unsigned long wdt_status;
 static spinlock_t wdt_lock;
 
-static void orion5x_wdt_ping(void)
+static void orion_wdt_ping(void)
 {
 	spin_lock(&wdt_lock);
 
@@ -53,7 +53,7 @@ static void orion5x_wdt_ping(void)
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_enable(void)
+static void orion_wdt_enable(void)
 {
 	u32 reg;
 
@@ -73,23 +73,23 @@ static void orion5x_wdt_enable(void)
 	writel(reg, TIMER_CTRL);
 
 	/* Enable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg |= WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg |= WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_disable(void)
+static void orion_wdt_disable(void)
 {
 	u32 reg;
 
 	spin_lock(&wdt_lock);
 
 	/* Disable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg &= ~WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg &= ~WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	/* Disable watchdog timer */
 	reg = readl(TIMER_CTRL);
@@ -99,7 +99,7 @@ static void orion5x_wdt_disable(void)
 	spin_unlock(&wdt_lock);
 }
 
-static int orion5x_wdt_get_timeleft(int *time_left)
+static int orion_wdt_get_timeleft(int *time_left)
 {
 	spin_lock(&wdt_lock);
 	*time_left = readl(WDT_VAL) / wdt_tclk;
@@ -107,16 +107,16 @@ static int orion5x_wdt_get_timeleft(int *time_left)
 	return 0;
 }
 
-static int orion5x_wdt_open(struct inode *inode, struct file *file)
+static int orion_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-	orion5x_wdt_enable();
+	orion_wdt_enable();
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t orion5x_wdt_write(struct file *file, const char *data,
+static ssize_t orion_wdt_write(struct file *file, const char *data,
 					size_t len, loff_t *ppos)
 {
 	if (len) {
@@ -133,18 +133,18 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data,
 					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
 			}
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 	}
 	return len;
 }
 
-static int orion5x_wdt_settimeout(int new_time)
+static int orion_wdt_settimeout(int new_time)
 {
 	if ((new_time <= 0) || (new_time > wdt_max_duration))
 		return -EINVAL;
 
 	/* Set new watchdog time to be used when
-	 * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+	 * orion_wdt_enable() or orion_wdt_ping() is called. */
 	heartbeat = new_time;
 	return 0;
 }
@@ -152,10 +152,10 @@ static int orion5x_wdt_settimeout(int new_time)
 static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING,
-	.identity	= "Orion5x Watchdog",
+	.identity	= "Orion Watchdog",
 };
 
-static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long orion_wdt_ioctl(struct file *file, unsigned int cmd,
 				unsigned long arg)
 {
 	int ret = -ENOTTY;
@@ -173,7 +173,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_KEEPALIVE:
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		ret = 0;
 		break;
 
@@ -182,11 +182,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		if (ret)
 			break;
 
-		if (orion5x_wdt_settimeout(time)) {
+		if (orion_wdt_settimeout(time)) {
 			ret = -EINVAL;
 			break;
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		/* Fall through */
 
 	case WDIOC_GETTIMEOUT:
@@ -194,7 +194,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_GETTIMELEFT:
-		if (orion5x_wdt_get_timeleft(&time)) {
+		if (orion_wdt_get_timeleft(&time)) {
 			ret = -EINVAL;
 			break;
 		}
@@ -204,10 +204,10 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static int orion5x_wdt_release(struct inode *inode, struct file *file)
+static int orion_wdt_release(struct inode *inode, struct file *file)
 {
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
@@ -218,98 +218,98 @@ static int orion5x_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations orion5x_wdt_fops = {
+static const struct file_operations orion_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.write		= orion5x_wdt_write,
-	.unlocked_ioctl	= orion5x_wdt_ioctl,
-	.open		= orion5x_wdt_open,
-	.release	= orion5x_wdt_release,
+	.write		= orion_wdt_write,
+	.unlocked_ioctl	= orion_wdt_ioctl,
+	.open		= orion_wdt_open,
+	.release	= orion_wdt_release,
 };
 
-static struct miscdevice orion5x_wdt_miscdev = {
+static struct miscdevice orion_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
-	.fops		= &orion5x_wdt_fops,
+	.fops		= &orion_wdt_fops,
 };
 
-static int __devinit orion5x_wdt_probe(struct platform_device *pdev)
+static int __devinit orion_wdt_probe(struct platform_device *pdev)
 {
-	struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data;
+	struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 
 	if (pdata) {
 		wdt_tclk = pdata->tclk;
 	} else {
-		printk(KERN_ERR "Orion5x Watchdog misses platform data\n");
+		printk(KERN_ERR "Orion Watchdog misses platform data\n");
 		return -ENODEV;
 	}
 
-	if (orion5x_wdt_miscdev.parent)
+	if (orion_wdt_miscdev.parent)
 		return -EBUSY;
-	orion5x_wdt_miscdev.parent = &pdev->dev;
+	orion_wdt_miscdev.parent = &pdev->dev;
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
-	if (orion5x_wdt_settimeout(heartbeat))
+	if (orion_wdt_settimeout(heartbeat))
 		heartbeat = wdt_max_duration;
 
-	ret = misc_register(&orion5x_wdt_miscdev);
+	ret = misc_register(&orion_wdt_miscdev);
 	if (ret)
 		return ret;
 
-	printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n",
+	printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n",
 				heartbeat, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
-static int __devexit orion5x_wdt_remove(struct platform_device *pdev)
+static int __devexit orion_wdt_remove(struct platform_device *pdev)
 {
 	int ret;
 
 	if (test_bit(WDT_IN_USE, &wdt_status)) {
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 		clear_bit(WDT_IN_USE, &wdt_status);
 	}
 
-	ret = misc_deregister(&orion5x_wdt_miscdev);
+	ret = misc_deregister(&orion_wdt_miscdev);
 	if (!ret)
-		orion5x_wdt_miscdev.parent = NULL;
+		orion_wdt_miscdev.parent = NULL;
 
 	return ret;
 }
 
-static void orion5x_wdt_shutdown(struct platform_device *pdev)
+static void orion_wdt_shutdown(struct platform_device *pdev)
 {
 	if (test_bit(WDT_IN_USE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 }
 
-static struct platform_driver orion5x_wdt_driver = {
-	.probe		= orion5x_wdt_probe,
-	.remove		= __devexit_p(orion5x_wdt_remove),
-	.shutdown	= orion5x_wdt_shutdown,
+static struct platform_driver orion_wdt_driver = {
+	.probe		= orion_wdt_probe,
+	.remove		= __devexit_p(orion_wdt_remove),
+	.shutdown	= orion_wdt_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "orion5x_wdt",
+		.name	= "orion_wdt",
 	},
 };
 
-static int __init orion5x_wdt_init(void)
+static int __init orion_wdt_init(void)
 {
 	spin_lock_init(&wdt_lock);
-	return platform_driver_register(&orion5x_wdt_driver);
+	return platform_driver_register(&orion_wdt_driver);
 }
 
-static void __exit orion5x_wdt_exit(void)
+static void __exit orion_wdt_exit(void)
 {
-	platform_driver_unregister(&orion5x_wdt_driver);
+	platform_driver_unregister(&orion_wdt_driver);
 }
 
-module_init(orion5x_wdt_init);
-module_exit(orion5x_wdt_exit);
+module_init(orion_wdt_init);
+module_exit(orion_wdt_exit);
 
 MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
-MODULE_DESCRIPTION("Orion5x Processor Watchdog");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index fddc2025dec..10d03d7931c 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -43,7 +43,7 @@ static int xen_suspend(void *data)
 	if (err) {
 		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
 			err);
-		device_power_up(PMSG_RESUME);
+		dpm_resume_noirq(PMSG_RESUME);
 		return err;
 	}
 
@@ -69,7 +69,7 @@ static int xen_suspend(void *data)
 	}
 
 	sysdev_resume();
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 	return 0;
 }
@@ -92,18 +92,18 @@ static void do_suspend(void)
 	}
 #endif
 
-	err = device_suspend(PMSG_SUSPEND);
+	err = dpm_suspend_start(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
+		printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
 		goto out;
 	}
 
 	printk(KERN_DEBUG "suspending xenstore...\n");
 	xs_suspend();
 
-	err = device_power_down(PMSG_SUSPEND);
+	err = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "device_power_down failed: %d\n", err);
+		printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
 		goto resume_devices;
 	}
 
@@ -119,10 +119,10 @@ static void do_suspend(void)
 	} else
 		xs_suspend_cancel();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 resume_devices:
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 
 	/* Make sure timer events get retriggered on all CPUs */
 	clock_was_set();
diff --git a/firmware/Makefile b/firmware/Makefile
index 25200d106ee..621de8e952f 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
 			     bnx2/bnx2-rv2p-09-4.6.15.fw \
 			     bnx2/bnx2-mips-06-4.6.16.fw \
@@ -40,13 +41,15 @@ fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
 fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
 				   cxgb3/t3c_psram-1.1.0.bin \
-				   cxgb3/t3fw-7.1.0.bin
+				   cxgb3/t3fw-7.4.0.bin
 fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 			     e100/d102e_ucode.bin
 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
 fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
+fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
+fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 4c52984a831..0f5649a08c0 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -412,7 +412,7 @@ Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter
 
 File: cxgb3/t3b_psram-1.1.0.bin.ihex
 File: cxgb3/t3c_psram-1.1.0.bin.ihex
-file: cxgb3/t3fw-7.1.0.bin.ihex
+file: cxgb3/t3fw-7.4.0.bin.ihex
 
 License: GPLv2 or OpenIB.org BSD license, no source visible
 
@@ -586,6 +586,26 @@ Originally developed by the pcmcia-cs project
 
 --------------------------------------------------------------------------
 
+Driver: PCMCIA_3C589 - 3Com PCMCIA adapter
+
+File: cis/3CXEM556.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
+Driver: PCMCIA_3C574 - 3Com PCMCIA adapter
+
+File: cis/3CCFEM556.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
 Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
 
 File: ositech/Xilinx7OD.bin
@@ -618,6 +638,26 @@ Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
 
+Driver: bnx2x: Broadcom Everest
+
+File: bnx2x-e1-4.8.53.0.fw.ihex
+File: bnx2x-e1h-4.8.53.0.fw.ihex
+
+License:
+  Copyright (c) 2007-2009 Broadcom Corporation
+
+  This file contains firmware data derived from proprietary unpublished
+  source code, Copyright (c) 2007-2009 Broadcom Corporation.
+
+  Permission is hereby granted for the distribution of this firmware data
+  in hexadecimal or equivalent format, provided this copyright notice is
+  accompanying it.
+
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
 Driver: BNX2 - Broadcom NetXtremeII
 
 File: bnx2/bnx2-mips-06-4.6.16.fw
diff --git a/firmware/bnx2x-e1-4.8.53.0.fw.ihex b/firmware/bnx2x-e1-4.8.53.0.fw.ihex
new file mode 100644
index 00000000000..f1edb1e7ad1
--- /dev/null
+++ b/firmware/bnx2x-e1-4.8.53.0.fw.ihex
@@ -0,0 +1,10364 @@
+:10000000000028600000006000000630000028C8E2
+:100010000000160800002F000000009400004510AA
+:10002000000073C8000045A8000000C40000B978B3
+:100030000000A4680000BA400000007400015EB037
+:100040000000559000015F28000000B80001B4C016
+:100050000000D1F80001B580000000040002878094
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000060400CC0000000418
+:10010000020400DC00100000020400E012140000F1
+:10011000020400E422140000020400E8321400008B
+:10012000060400EC000000040104012400000000AB
+:1001300001040128000000000104012C000000005F
+:10014000010401300000000002040004000000FF70
+:1001500002040008000000FF0204000C000000FF81
+:1001600002040010000000FF02040014000000FF61
+:1001700002040018000000FF0204001C000000FF41
+:1001800002040020000000FF020400240000003EE2
+:1001900002040028000000000204002C0000003FC0
+:1001A000020400300000003F020400340000003F61
+:1001B00002040038000000000204003C0000003F80
+:1001C000020400400000003F020400440000003F21
+:1001D00002042008000004110204200C00000400A6
+:1001E000020420100000040402042014000004197A
+:1001F0000204201C0000FFFF020420200000FFFF7B
+:10020000020420240000FFFF020420280000FFFF5A
+:1002100006042038000000020204204000000034E0
+:100220000204204400000035060420480000007C41
+:100230000204223807FFFFFF0204223C0000003FB7
+:100240000204224007FFFFFF020422440000000FC7
+:1002500001042248000000000104224C00000000BC
+:10026000010422500000000001042254000000009C
+:1002700001042258000000000104225C000000007C
+:10028000010422600000000001042264000000005C
+:1002900001042268000000000104226C000000003C
+:1002A000010422700000000001042274000000001C
+:1002B00001042278000000000104227C00000000FC
+:1002C000020424BC000000010C042000000003E82C
+:1002D0000A042000000000010B0420000000000AB6
+:1002E0000205004400000020020500480000003222
+:1002F000020500900215002002050094021500205E
+:1003000002050098000000300205009C0810000063
+:10031000020500A000000033020500A40000003028
+:10032000020500A800000031020500AC0000000238
+:10033000020500B000000005020500B40000000640
+:10034000020500B800000002020500BC0000000227
+:10035000020500C000000000020500C40000000506
+:10036000020500C800000002020500CC00000002E7
+:10037000020500D000000002020500D400000001C8
+:1003800002050114000000010205011C000000012B
+:100390000205012000000002020502040000000125
+:1003A0000205020C0000004002050210000000409F
+:1003B0000205021C000000200205022000000013BC
+:1003C0000205022400000020060502400000000A89
+:1003D0000405028000200000020500500000000714
+:1003E0000205005400000007020500580000000844
+:1003F0000205005C00000008060500600000000423
+:10040000020500D800000006020500E00000000D13
+:10041000020500E40000002D020500E800000007CE
+:10042000020500EC00000027020500F000000007B4
+:10043000020500F400000027020500F80000000794
+:10044000020500FC00000027020500040000000176
+:1004500002050008000000010205000C0000000178
+:100460000205001000000001020500140000000158
+:1004700002050018000000010205001C0000000138
+:100480000205002000000001020500240000000118
+:1004900002050028000000010205002C00000001F8
+:1004A00002050030000000010205003400000001D8
+:1004B00002050038000000010205003C00000001B8
+:1004C00002050040000000010406100002000020A8
+:1004D000020600DC00000001010600D80000000058
+:1004E0000406020000030220020600DC00000000F7
+:1004F00002060068000000B802060078000001143F
+:10050000010600B800000000010600C8000000005D
+:100510000206006C000000B80206007C0000011416
+:10052000010600BC00000000010600CC0000000035
+:100530000718040000930000081807600014022345
+:10054000071C0000324F0000071C800033250C946C
+:10055000071D00000E4D195E081D1E005C4002259F
+:100560000118000000000000011800040000000055
+:1005700001180008000000000118000C0000000035
+:100580000118001000000000011800140000000015
+:1005900002180020000000010218002400000002E0
+:1005A00002180028000000030218002C00000000C0
+:1005B000021800300000000402180034000000019E
+:1005C00002180038000000000218003C0000000182
+:1005D000021800400000000402180044000000005F
+:1005E00002180048000000010218004C000000033F
+:1005F0000218005000000000021800540000000122
+:1006000002180058000000040218005C00000000FE
+:1006100002180060000000010218006400000003DE
+:1006200002180068000000000218006C00000001C1
+:10063000021800700000000402180074000000009E
+:1006400002180078000000040218007C000000037B
+:100650000618008000000002021800A400003FFFFE
+:10066000021800A8000003FF021802240000000086
+:1006700002180234000000000218024C00000000C2
+:10068000021802E4000000FF061810000000040039
+:10069000021B8BC000000001021B80000000003420
+:1006A000021B804000000018021B80800000000C2C
+:1006B000021B80C0000000200C1B83000007A1204B
+:1006C0000A1B8300000001380B1B83000000138805
+:1006D000021B83C0000001F4061A2000000000B2D3
+:1006E000061A23C8000000C1041A26CC0001022704
+:1006F000061A1020000000C8061A100000000002B0
+:10070000061A1C1800000004061A1C100000000243
+:10071000061A080000000002061A0808000000027D
+:10072000061A081000000004041A1FB00004022872
+:10073000041A4CB00008022C061A22C8000000203F
+:10074000061A40000000016C021A4B600000000015
+:10075000061A14000000000A061A145000000006D1
+:10076000061A150000000002041A150800050234DC
+:10077000061A151C00000007061A1570000000126A
+:10078000061A09C00000004C061A0800000000020A
+:10079000061A08200000000E041A1FB000020239D9
+:1007A000061A290800000002061A2348000000204B
+:1007B000061A45B00000016C021A4B6400000000EC
+:1007C000061A14280000000A061A14680000000621
+:1007D000061A153800000002041A15400005023BF5
+:1007E000061A155400000007061A15B8000000127A
+:1007F000061A0AF00000004C061A08080000000261
+:10080000061A08580000000E041A1FB80002024021
+:10081000061A2910000000020200A2800000000158
+:100820000200A294071D29110200A29800000000F6
+:100830000200A29C009C04240200A2A00000000070
+:100840000200A2A4000002090200A4FCFF000000B4
+:10085000020100B400000001020100B80000000124
+:10086000020100DC000000010201010000000001A3
+:1008700002010104000000010201007C00300000C0
+:1008800002010084000000280201008C000000002A
+:1008900002010130000000040201025C00000001BE
+:1008A000020103280000000002010554000000308E
+:1008B000020100C400000001020100CC00000001A0
+:1008C000020100F800000001020100F00000000138
+:1008D00002010080003000000201008800000028B2
+:1008E0000201009000000000020101340000000439
+:1008F000020102DC000000010201032C00000000E4
+:100900000201056400000030020100C8000000017F
+:10091000020100D000000001020100FC0000000103
+:10092000020100F400000001020C10000000002091
+:10093000020C200800000A11020C200C00000A0022
+:10094000020C201000000A04020C201C0000FFFF13
+:10095000020C20200000FFFF020C20240000FFFFFB
+:10096000020C20280000FFFF020C2038000000C607
+:10097000020C203C00000000020C2040000000346B
+:10098000020C204400000035060C20480000001C2A
+:10099000020C20B800000001060C20BC0000005F23
+:1009A000020C223807FFFFFF020C223C0000003F30
+:1009B000020C224007FFFFFF020C22440000000F40
+:1009C000010C224800000000010C224C0000000035
+:1009D000010C225000000000010C22540000000015
+:1009E000010C225800000000010C225C00000000F5
+:1009F000010C226000000000010C226400000000D5
+:100A0000010C226800000000010C226C00000000B4
+:100A1000010C227000000000010C22740000000094
+:100A2000010C227800000000010C227C0000000074
+:100A3000020C24BC000000010C0C2000000003E8A4
+:100A40000A0C2000000000010B0C20000000000A2E
+:100A5000020C400800000A11020C400C00000A00C1
+:100A6000020C401000000A04020C401400000A218D
+:100A7000020C401C0000FFFF020C40200000FFFFA2
+:100A8000020C40240000FFFF020C40280000FFFF82
+:100A9000020C403800000046020C403C00000005FB
+:100AA000020C404000000034020C404400000035BD
+:100AB000060C40480000005C020C41B80000000138
+:100AC000060C41BC0000001F020C423807FFFFFF6C
+:100AD000020C423C0000003F020C424007FFFFFFB7
+:100AE000020C42440000000F010C424800000000CC
+:100AF000010C424C00000000010C425000000000BC
+:100B0000010C425400000000010C4258000000009B
+:100B1000010C425C00000000010C4260000000007B
+:100B2000010C426400000000010C4268000000005B
+:100B3000010C426C00000000010C4270000000003B
+:100B4000010C427400000000010C4278000000001B
+:100B5000010C427C00000000010C428000000000FB
+:100B6000020C44C0000000010C0C4000000003E82F
+:100B70000A0C4000000000010B0C40000000000ABD
+:100B8000020D004400000032020D008C021500200E
+:100B9000020D009002150020020D009408100000C4
+:100BA000020D009800000033020D009C00000002BE
+:100BB000020D00A000000000020D00A400000005CE
+:100BC000020D00A800000005060D00AC00000002A8
+:100BD000020D00B400000002020D00B80000000386
+:100BE000020D00BC00000002020D00C00000000168
+:100BF000020D00C800000002020D00CC000000023F
+:100C0000020D010800000001020D015C000000015E
+:100C1000020D016400000001020D016800000002E5
+:100C2000020D020400000001020D020C0000002071
+:100C3000020D021000000040020D021400000040EE
+:100C4000020D022000000003020D02240000001823
+:100C5000060D028000000012040D03000024024271
+:100C6000020D004C00000001020D005000000002C7
+:100C7000020D005400000008020D0058000000089A
+:100C8000060D005C00000004020D00C4000000041A
+:100C9000020D011400000009020D011800000029D6
+:100CA000020D011C0000000A020D01200000002AB4
+:100CB000020D012400000007020D0128000000279A
+:100CC000020D012C00000007020D0130000000277A
+:100CD000020D01340000000C020D01380000002C50
+:100CE000020D013C0000000C020D01400000002C30
+:100CF000020D01440000000C020D01480000002C10
+:100D0000020D000400000001020D000800000001B7
+:100D1000020D000C00000001020D00100000000197
+:100D2000020D001400000001020D00180000000177
+:100D3000020D001C00000001020D00200000000157
+:100D4000020D002400000001020D00280000000137
+:100D5000020D002C00000001020D00300000000117
+:100D6000020D003400000001020D003800000001F7
+:100D7000020D003C00000001020E004C0000003299
+:100D8000020E009402150020020E009802150020A9
+:100D9000020E009C00000030020E00A008100000AF
+:100DA000020E00A400000033020E00A80000003074
+:100DB000020E00AC00000031020E00B00000000284
+:100DC000020E00B400000004020E00B80000000093
+:100DD000020E00BC00000002020E00C00000000273
+:100DE000020E00C400000000020E00C80000000255
+:100DF000020E00CC00000007020E00D0000000022E
+:100E0000020E00D400000002020E00D80000000113
+:100E1000020E00E400000001020E01440000000187
+:100E2000020E014C00000001020E01500000000201
+:100E3000020E020400000001020E020C000000403D
+:100E4000020E021000000040020E021C000000040E
+:100E5000020E022000000020020E02240000000EFC
+:100E6000020E02280000001B060E03000000001204
+:100E7000040E0280001B0266020E005400000010E7
+:100E8000020E005800000007020E005C0000000F78
+:100E9000020E006000000010060E00640000000456
+:100EA000020E00DC00000003020E01100000000F23
+:100EB000020E01140000002F020E01180000000EA7
+:100EC000020E011C0000002E020E000400000001B2
+:100ED000020E000800000001020E000C00000001DC
+:100EE000020E001000000001020E001400000001BC
+:100EF000020E001800000001020E001C000000019C
+:100F0000020E002000000001020E0024000000017B
+:100F1000020E002800000001020E002C000000015B
+:100F2000020E003000000001020E0034000000013B
+:100F3000020E003800000001020E003C000000011B
+:100F4000020E004000000001020E004400000001FB
+:100F50000730040000C30000083007680013028156
+:100F600007340000314C00000734800035EF0C548A
+:100F700007350000361319D00735800007112755B3
+:100F800008358EE04E24028301300000000000008E
+:100F900001300004000000000130000800000000E3
+:100FA0000130000C000000000130001000000000C3
+:100FB0000130001400000000023000200000000199
+:100FC000023000240000000202300028000000036C
+:100FD0000230002C0000000002300030000000044D
+:100FE0000230003400000001023000380000000030
+:100FF0000230003C0000000102300040000000040C
+:1010000002300044000000000230004800000001EF
+:101010000230004C000000030230005000000000CD
+:1010200002300054000000010230005800000004AB
+:101030000230005C0000000002300060000000018F
+:10104000023000640000000302300068000000006D
+:101050000230006C0000000102300070000000044B
+:10106000023000740000000002300078000000042C
+:101070000230007C00000003063000800000000207
+:10108000023000A400003FFF023000A8000003FF70
+:101090000230022400000000023002340000000090
+:1010A0000230024C00000000023002E40000FFFFAA
+:1010B000063020000000080002338BC00000000151
+:1010C000023380000000001A023380400000004E0E
+:1010D0000233808000000010023380C00000002036
+:1010E0000C3383000007A1200A338300000001387D
+:1010F0000B33830000001388023383C0000001F427
+:101100000C3383801DCD65000A3383800004C4B492
+:101110000B338380004C4B4006325000000000C26D
+:1011200006321020000000C8063210000000000245
+:101130000632464000000040063257F0000000042E
+:10114000063257D800000005043257EC0001028532
+:1011500006321C60000000200432283000020286A3
+:10116000023308000100000004330C000010028864
+:10117000023308000000000004330C400010029805
+:1011800006321400000000A0063219000000001012
+:10119000063219800000003006324740000000B4DB
+:1011A00002321D900000000006321B4000000004C7
+:1011B00006321B6000000020063253180000009821
+:1011C00006321680000000A0063219400000001010
+:1011D00006321A400000003006324A10000000B407
+:1011E00002321D940000000006321B500000000473
+:1011F00006321BE0000000200632557800000098FF
+:10120000072004000071000008200780001002A8D9
+:1012100007240000322900000724800023630C8B80
+:101220000824C930654002AA012000000000000027
+:101230000120000400000000012000080000000060
+:101240000120000C00000000012000100000000040
+:101250000120001400000000022000200000000116
+:1012600002200024000000020220002800000003E9
+:101270000220002C000000000220003000000004CA
+:1012800002200034000000010220003800000000AD
+:101290000220003C00000001022000400000000489
+:1012A000022000440000000002200048000000016D
+:1012B0000220004C0000000302200050000000004B
+:1012C0000220005400000001022000580000000429
+:1012D0000220005C0000000002200060000000010D
+:1012E00002200064000000030220006800000000EB
+:1012F0000220006C000000010220007000000004C9
+:1013000002200074000000000220007800000004A9
+:101310000220007C00000003062000800000000284
+:10132000022000A400003FFF022000A8000003FFED
+:10133000022002240000000002200234000000000D
+:101340000220024C00000000022002E40000FFFF27
+:10135000062020000000080002238BC000000001CE
+:1013600002238000000000100223804000000012D1
+:101370000223808000000030022380C00000000EA5
+:10138000022383C0000001F4062250000000004246
+:1013900006221020000000C80622100000000002F3
+:1013A00006222000000000C00622307000000080ED
+:1013B0000622428000000004062225C000000240F0
+:1013C00004222EC8000802AC02230800013FFFFFE0
+:1013D00004230C00001002B40223080000000000E7
+:1013E00004230C40001002C406221400000000A0D8
+:1013F00006221900000000100622198000000030AB
+:101400000222511800000000062223000000000EF6
+:1014100006223040000000060622241000000030A2
+:1014200006221680000000A00622194000000010CD
+:1014300006221A40000000300222511C0000000069
+:10144000062223380000000E062230580000000655
+:10145000062224D0000000300216100000000020F8
+:1014600002170008000000020217002C0000000311
+:101470000217003C000000040217004400000008AE
+:1014800002170048000000020217004C0000009004
+:1014900002170050000000900217005400800090D6
+:1014A0000217005808140000021700600000008AAC
+:1014B000021700640000008002170068000000901E
+:1014C0000217006C00000080021700700000000688
+:1014D00002170078000007D00217007C0000076C9C
+:1014E00002170038007C1004021700040000000FEF
+:1014F0000616402400000002021640700000001C86
+:10150000021642080000000102164210000000010D
+:1015100002164220000000010216422800000001CD
+:10152000021642300000000102164238000000019D
+:1015300002164260000000010C16401C0003D0900F
+:101540000A16401C0000009C0B16401C000009C439
+:101550000216403000000008021640340000000C63
+:10156000021640380000001002164044000000201F
+:101570000216400000000001021640D800000001E1
+:1015800002164008000000010216400C0000000195
+:101590000216401000000001021642400000000048
+:1015A00002164248000000000616427000000002C9
+:1015B00002164250000000000216425800000000CF
+:1015C00006164280000000020216600800000614A1
+:1015D0000216600C000006000216601000000604EF
+:1015E0000216601C0000FFFF021660200000FFFFD3
+:1015F000021660240000FFFF021660280000FFFFB3
+:1016000002166038000000200216603C0000002036
+:1016100002166040000000340216604400000035ED
+:1016200002166048000000230216604C00000024EF
+:1016300002166050000000250216605400000026CB
+:1016400002166058000000270216605C00000029A6
+:10165000021660600000002A021660640000002B81
+:10166000021660680000002C0216606C0000002D5D
+:101670000616607000000052021661B800000001FA
+:10168000061661BC0000001F0216623807FFFFFF4C
+:101690000216623C0000003F0216624007FFFFFF97
+:1016A000021662440000000F0116624800000000AC
+:1016B0000116624C0000000001166250000000009C
+:1016C000011662540000000001166258000000007C
+:1016D0000116625C0000000001166260000000005C
+:1016E000011662640000000001166268000000003C
+:1016F0000116626C0000000001166270000000001C
+:1017000001166274000000000116627800000000FB
+:101710000116627C00000000021664BC000000019B
+:101720000C166000000003E80A16600000000001CB
+:101730000B1660000000000A021680400000000640
+:101740000216804400000005021680480000000ACE
+:101750000216804C000000050216805400000002B2
+:10176000021680CC00000004021680D000000004A5
+:10177000021680D400000004021680D80000000485
+:10178000021680DC00000004021680E00000000465
+:10179000021680E400000004021680E80000000445
+:1017A0000216880400000004021680300000007C4D
+:1017B000021680340000003D021680380000003F11
+:1017C0000216803C0000009C021680F0000000071A
+:1017D000061680F4000000050216880C01010101C4
+:1017E00002168108000000000216810C00000004AF
+:1017F000021681100000000402168114000000028D
+:101800000216881008012004021681180000000545
+:101810000216811C00000005021681200000000550
+:1018200002168124000000050216882C20081001F1
+:1018300002168128000000080216812C0000000614
+:1018400002168130000000070216813400000000FB
+:1018500002168830010101200616813800000004BC
+:1018600002168834010101010616814800000004B7
+:101870000216883801010101061681580000000493
+:101880000216883C01010101061681680000000370
+:101890000216817400000001021688400101010156
+:1018A00002168178000000010216817C0000000110
+:1018B00002168180000000010216818400000001F0
+:1018C000021688440101010102168188000000010E
+:1018D0000216818C000000040216819000000004B2
+:1018E00002168194000000020216884808012004B4
+:1018F00002168198000000050216819C0000000578
+:10190000021681A000000005021681A40000000557
+:101910000216881420081001021681A80000000891
+:10192000021681AC00000006021681B0000000071C
+:10193000021681B40000000102168818010101207E
+:10194000021681B800000001021681BC00000001EF
+:10195000021681C000000001021681C400000001CF
+:101960000216881C01010101021681C80000000155
+:10197000021681CC00000001021681D00000000197
+:10198000021681D400000001021688200101010125
+:10199000021681D800000001021681DC000000015F
+:1019A000021681E000000001021681E4000000013F
+:1019B0000216882401010101021681E800000001DD
+:1019C000021681EC00000001021681F00000000107
+:1019D000021688280101010102168240FFFF003F24
+:1019E00006168244000000020216824CFFFF003FF0
+:1019F000021682500000010002168254000001000D
+:101A0000061682580000000202168260000000C024
+:101A100002168264000000C00216826800001E00E8
+:101A20000216826C00001E00021682700000400048
+:101A300002168274000040000216827800008000C6
+:101A40000216827C000080000216828000002000C6
+:101A5000021682840000200006168288000000071B
+:101A6000021682A400000001061682A80000000AE7
+:101A7000021681F400000C08021681F800000040F4
+:101A8000021681FC00000100021682000000002006
+:101A9000021682040000001702168208000000806F
+:101AA0000216820C000002000216821000000000E4
+:101AB00002168218FFFF01FF02168214FFFF01FFCA
+:101AC0000216823C00000013021680900000013FC5
+:101AD0000216806000000140021680640000014090
+:101AE000061680680000000202168070000000C028
+:101AF00006168074000000070216809C0000004853
+:101B0000021680A000000048061680A40000000213
+:101B1000021680AC00000048061680B000000007E6
+:101B2000021682380000800002168234000025E48C
+:101B30000216809400007FFF02168220000000073A
+:101B40000216821C00000007021682280000000016
+:101B500002168224FFFFFFFF021682300000000001
+:101B60000216822CFFFFFFFF021680EC000000FF30
+:101B700002140000000000010214000C000000012B
+:101B800002140040000000010214004400007FFF26
+:101B90000214000C0000000002140000000000000D
+:101BA0000214006C00000000021400040000000198
+:101BB00002140030000000010214000400000000C4
+:101BC0000214005C00000000021400080000000184
+:101BD000021400340000000102140008000000009C
+:101BE00002140060000000000202005800000032F1
+:101BF000020200A003150020020200A40315002029
+:101C0000020200A801000030020200AC081000002F
+:101C1000020200B000000033020200B400000030F5
+:101C2000020200B800000031020200BC0000000304
+:101C3000020200C000000006020200C4000000030F
+:101C4000020200C800000003020200CC00000002F3
+:101C5000020200D000000000020200D400000002D6
+:101C6000020200DC00000000020200E000000006AA
+:101C7000020200E400000004020200E8000000028A
+:101C8000020200EC00000002020200F0000000016D
+:101C9000020200FC00000006020201200000000019
+:101CA0000202013400000002020201B00000000143
+:101CB0000202020C000000010202021400000001F6
+:101CC00002020218000000020202040400000001E7
+:101CD0000202040C00000040020204100000004058
+:101CE0000202041C00000004020204200000002084
+:101CF0000202042400000002020204280000001F67
+:101D0000060205000000001204020480001F02D435
+:101D1000020200600000000F0202006400000007E1
+:101D2000020200680000000B0202006C0000000EBE
+:101D30000602007000000004020200F4000000042B
+:101D4000020200040000000102020008000000017D
+:101D50000202000C0000000102020010000000015D
+:101D6000020200140000000102020018000000013D
+:101D70000202001C0000000102020020000000011D
+:101D800002020024000000010202002800000001FD
+:101D90000202002C000000010202003000000001DD
+:101DA00002020034000000010202003800000001BD
+:101DB0000202003C0000000102020040000000019D
+:101DC000020200440000000102020048000000017D
+:101DD0000202004C0000000102020050000000015D
+:101DE00002020108000000C80202011800000002FF
+:101DF000020201C400000000020201CC0000000049
+:101E0000020201D400000002020201DC0000000214
+:101E1000020201E4000000FF020201EC000000FFEA
+:101E20000202010C000000C80202011C00000002B6
+:101E3000020201C800000000020201D00000000000
+:101E4000020201D800000002020201E000000002CC
+:101E5000020201E8000000FF020201F0000000FFA2
+:101E60000728040000B5000008280768001302F3E3
+:101E7000072C000033660000072C800038B30CDA12
+:101E8000072D00003BB11B07072D80002A2629F4EF
+:101E9000082DD6C0452802F50128000000000000EA
+:101EA00001280004000000000128000800000000D4
+:101EB0000128000C000000000128001000000000B4
+:101EC000012800140000000002280020000000018A
+:101ED000022800240000000202280028000000035D
+:101EE0000228002C0000000002280030000000043E
+:101EF0000228003400000001022800380000000021
+:101F00000228003C000000010228004000000004FC
+:101F100002280044000000000228004800000001E0
+:101F20000228004C000000030228005000000000BE
+:101F3000022800540000000102280058000000049C
+:101F40000228005C00000000022800600000000180
+:101F5000022800640000000302280068000000005E
+:101F60000228006C0000000102280070000000043C
+:101F7000022800740000000002280078000000041D
+:101F80000228007C000000030628008000000002F8
+:101F9000022800A400003FFF022800A8000003FF61
+:101FA0000228022400000000022802340000000081
+:101FB0000228024C00000000022802E40000FFFF9B
+:101FC0000628200000000800022B8BC00000000142
+:101FD000022B800000000000022B8040000000184F
+:101FE000022B80800000000C022B80C000000066E5
+:101FF0000C2B83000007A1200A2B8300000001386E
+:102000000B2B830000001388022B83C0000001F417
+:102010000C2B8340000001F40A2B834000000000D9
+:102020000B2B8340000000050A2B83800004C4B4FE
+:102030000C2B83801DCD65000B2B8380004C4B4007
+:10204000062A3D6000000004042A3D70000202F7E9
+:10205000062A300000000048062A1020000000C8B0
+:10206000062A100000000002062A31280000008E17
+:10207000022A336800000000042A3370000202F9CB
+:10208000042A3B90000402FB042A3E20000202FFC7
+:10209000022A151800000001022A18300000000072
+:1020A000022A183800000000042A18200002030148
+:1020B000062A4AC000000002062A4B000000000465
+:1020C000042A1F4800020303022B0800000000003E
+:1020D000042B0C0000100305022B08000100000077
+:1020E000042B0C4000080315022B0800020000001E
+:1020F000042B0C600008031D062A3BA000000014FE
+:10210000062A3C4000000024062A14000000000AB1
+:10211000062A145000000006062A3378000000FC4E
+:10212000022A3B5800000000042A3D7800020325E3
+:10213000042A3D8800100327022A15000000000031
+:10214000022A150800000001062A502000000002A3
+:10215000062A503000000002062A5000000000024B
+:10216000062A501000000002022A50400000000021
+:10217000062A50480000000E022A50B80000000154
+:10218000042A4AC800020337062A4B100000004206
+:10219000062A4D2000000004062A3BF0000000142F
+:1021A000062A3CD000000024062A14280000000A59
+:1021B000062A146800000006062A3768000000FCA2
+:1021C000022A3B5C00000000042A3D800002033923
+:1021D000042A3DC80010033B022A15040000000039
+:1021E000022A150C00000001062A502800000002F7
+:1021F000062A503800000002062A5008000000029B
+:10220000062A501800000002022A50440000000074
+:10221000062A50800000000E022A50BC0000000177
+:10222000042A4AD00002034B062A4C180000004240
+:10223000062A4D30000000040210100800000001C2
+:10224000021010000003D000021010040000003D36
+:10225000091018000200034D091011000020054D5F
+:102260000610118000000002091011880006056D9B
+:10227000061011A00000001806102400000000E065
+:102280000210201C000000000210202000000001AD
+:10229000021020C000000001021020040000000114
+:1022A000021020080000000109103C000005057321
+:1022B00009103C2000050578091038000005057D4F
+:1022C00002104028000000100210404400003FFFB0
+:1022D0000210405800280000021040840084924AF6
+:1022E0000210405800000000061080680000000442
+:1022F00002108000000010800610802800000002FC
+:102300000210803800000010021080400000FFFF23
+:10231000021080440000FFFF021080500000000007
+:102320000210810000000000061081200000000261
+:1023300002108008000002B50210801000000000AA
+:10234000061082000000004A021081080001FFFF11
+:1023500006108140000000020210800000001A8078
+:102360000610900000000024061091200000004A92
+:10237000061093700000004A061095C00000004A45
+:10238000021080040000108006108030000000025F
+:102390000210803C00000010021080480000FFFF87
+:1023A0000210804C0000FFFF02108054000000006B
+:1023B00002108104000000000610812800000002C5
+:1023C0000210800C000002B5021080140000000012
+:1023D000061084000000004A0210810C0001FFFF7B
+:1023E00006108148000000020210800400001A80DC
+:1023F0000610909000000024061092480000004A49
+:10240000061094980000004A061096E80000004A62
+:102410000212049000E383400212051400003C10F5
+:1024200002120494FFFFFFFF02120498FFFFFFFF58
+:102430000212049CFFFFFFFF021204A0FFFFFFFF38
+:10244000021204A4FFFFFFFF021204A8FFFFFFFF18
+:10245000021204ACFFFFFFFF021204B0FFFFFFFFF8
+:10246000021204B8FFFFFFFF021204BCFFFFFFFFD0
+:10247000021204C0FFFFFFFF021204C4FFFFFFFFB0
+:10248000021204C8FFFFFFFF021204CCFFFFFFFF90
+:10249000021204D0FFFFFFFF021204DCFFFFFFFF68
+:1024A000021204E0FFFFFFFF021204E4FFFFFFFF40
+:1024B000021204E8FFFFFFFF021204ECFFFFFFFF20
+:1024C000021204F0FFFFFFFF021204F4FFFFFFFF00
+:1024D000021204F8FFFFFFFF021204FCFFFFFFFFE0
+:1024E00002120500FFFFFFFF02120504FFFFFFFFBE
+:1024F00002120508FFFFFFFF0212050CFFFFFFFF9E
+:1025000002120510FFFFFFFF021204D4FFFF333059
+:10251000021204D8FFFF3340021204B4F00030006E
+:1025200002120390000000080212039C0000000841
+:10253000021203A000000008021203A4000000021F
+:10254000021203BC00000004021203C000000005D8
+:10255000021203C400000004021203D000000000B5
+:102560000212036C00000001021203680000003F29
+:10257000021201BC00000040021201C00000180855
+:10258000021201C400000803021201C8000008037F
+:10259000021201CC00000040021201D00000000332
+:1025A000021201D400000803021201D8000008033F
+:1025B000021201DC00000803021201E00001000326
+:1025C000021201E400000803021201E800000803FF
+:1025D000021201EC00000003021201F000000003EF
+:1025E000021201F400000003021201F800000003CF
+:1025F000021201FC000000030212020000000003AE
+:10260000021202040000000302120208000000038C
+:102610000212020C0000000302120210000000036C
+:10262000021202140000000302120218000000034C
+:102630000212021C0000000302120220000000032C
+:1026400002120224000000030212022800002403E8
+:102650000212022C0000002F0212023000000009BA
+:102660000212023400000019021202380000018434
+:102670000212023C00000183021202400000030625
+:102680000212024400000019021202480000000673
+:102690000212024C00000306021202500000030660
+:1026A00002120254000003060212025800000C86B7
+:1026B0000212025C00000306021202600000030620
+:1026C0000212026400000006021202680000000606
+:1026D0000212026C000000060212027000000006E6
+:1026E00002120274000000060212027800000006C6
+:1026F0000212027C000000060212028000000006A6
+:102700000212028400000006021202880000000685
+:102710000212028C00000006021202900000000665
+:102720000212029400000006021202980000000645
+:102730000212029C00000006021202A00000030622
+:10274000021202A400000013021202A800000006F8
+:10275000021202B000001004021202B400001004C1
+:102760000212032400106440021203280010644087
+:10277000021201B0000000010600A00000000016D7
+:102780000200A06CBF5C00000200A070FFF51FEF0C
+:102790000200A0740000FFFF0200A078500003E0D8
+:1027A0000200A07C000000000200A0800000A00049
+:1027B0000600A084000000050200A0980FE00000C1
+:1027C0000600A09C000000140200A0EC555400007C
+:1027D0000200A0F0555555550200A0F400005555D3
+:1027E0000200A0F8000000000200A0FC5554000008
+:1027F0000200A100555555550200A1040000555591
+:102800000200A108000000000200A22C000000004D
+:102810000600A230000000030200A06000000007D4
+:102820000200A10CBF5C00000200A110FFF51FEF29
+:102830000200A1140000FFFF0200A118500003E0F5
+:102840000200A11C000000000200A1200000A00066
+:102850000600A124000000050200A1380FE00000DE
+:102860000600A13C000000140200A18C5554000099
+:102870000200A190555555550200A19400005555F0
+:102880000200A198000000000200A19C5554000025
+:102890000200A1A0555555550200A1A400005555B0
+:1028A0000200A1A8000000000200A23C00000000FD
+:1028B0000600A240000000030200A0640000000720
+:1028C00000000000000000000000002E00000000DA
+:1028D00000000000000000000000000000000000F8
+:1028E00000000000000000000000000000000000E8
+:1028F00000000000000000000000000000000000D8
+:1029000000000000000000000000000000000000C7
+:1029100000000000000000000000000000000000B7
+:10292000002E005000000000000000000000000029
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000050008DAA
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:102970000000000000000000008D00920092009610
+:102980000096009A00000000000000000000000017
+:102990000000000000000000000000000000000037
+:1029A00000000000009A00DB00DB00E900E900F70E
+:1029B0000000000000000000000000000000000017
+:1029C0000000000000000000000000000000000007
+:1029D00000000000000000000000000000000000F7
+:1029E00000000000000000000000000000000000E7
+:1029F00000000000000000000000000000000000D7
+:102A000000000000000000000000000000000000C6
+:102A100000000000000000000000000000000000B6
+:102A200000000000000000000000000000000000A6
+:102A30000000000000000000000000000000000096
+:102A40000000000000000000000000000000000086
+:102A50000000000000000000000000000000000076
+:102A60000000000000000000000000000000000066
+:102A70000000000000000000000000000000000056
+:102A800000F700FE00000000000000000000000051
+:102A90000000000000000000000000000000000036
+:102AA0000000000000000000000000000000000026
+:102AB0000000000000000000000000000000000016
+:102AC0000000000000000000000000000000000006
+:102AD000000000000000000000FE01030103010EE1
+:102AE000010E0119000000000000000000000000BD
+:102AF00000000000000000000000000000000000D6
+:102B000000000000000000000000000000000000C5
+:102B100000000000000000000000000000000000B5
+:102B200000000000000000000000000000000000A5
+:102B30000119011A00000000000000000000000060
+:102B40000000000000000000000000000000000085
+:102B5000000000000000000000000000011A013E1B
+:102B60000000000000000000000000000000000065
+:102B70000000000000000000000000000000000055
+:102B80000000000000000000013E016400000000A1
+:102B90000000000000000000000000000000000035
+:102BA0000000000000000000000000000000000025
+:102BB00000000000016401A300000000000000000C
+:102BC0000000000000000000000000000000000005
+:102BD00000000000000000000000000000000000F5
+:102BE00001A301DE00000000000000000000000062
+:102BF00000000000000000000000000000000000D5
+:102C000000000000000000000000000001DE0224BF
+:102C10000224022C022C02340000000000000000FC
+:102C200000000000000000000000000000000000A4
+:102C300000000000000000000234027102710278FE
+:102C40000278027F00000000000000000000000089
+:102C50000000000000000000000000000000000074
+:102C600000000000027F0280000000000000000061
+:102C70000000000000000000000000000000000054
+:102C80000000000000000000000000000000000044
+:102C9000028002920000000000000000000000001E
+:102CA0000000000000000000000000000000000024
+:102CB000000000000000000000000000029202A7D7
+:102CC00002A702AA02AA02AD000000000000000054
+:102CD00000000000000000000000000000000000F4
+:102CE000000000000000000002AD02DB0000000058
+:102CF00000000000000000000000000000000000D4
+:102D000000000000000000000000000000000000C3
+:102D10000000000002DB0362000000000000000071
+:102D200000000000000000000000000000000000A3
+:102D30000000000000000000000000000000000093
+:102D4000036203690369036D036D037100000000F2
+:102D50000000000000000000000000000000000073
+:102D6000000000000000000000000000037103B03C
+:102D700003B003B803B803C0000000000000000067
+:102D80000000000000000000000000000000000043
+:102D9000000000000000000003C004130413042717
+:102DA0000427043B000000000000000000000000B9
+:102DB0000000000000000000000000000000000013
+:102DC00000000000043B044300000000000000007D
+:102DD00000000000000000000000000000000000F3
+:102DE00000000000000000000000000000000000E3
+:102DF000044304490000000000000000000000003F
+:102E000000000000000000000000000000000000C2
+:102E10000000000000000000000000000449044C15
+:102E200000000000000000000000000000000000A2
+:102E30000000000000000000000000000000000092
+:102E40000000000000000000044C045100000000DD
+:102E50000000000000000000000000000000000072
+:102E60000000000000000000000000000000000062
+:102E70000000000004510452045204640464047607
+:102E80000000000000000000000000000000000042
+:102E90000000000000000000000000000000000032
+:102EA000047604E3000000000000000000000000C1
+:102EB0000000000000000000000000000000000012
+:102EC00000000000000000000000000004E304E433
+:102ED00004E404F804F8050C000000000000000001
+:102EE00000000000000000000000000000000000E2
+:102EF00000000000000000000000000000000000D2
+:102F000000010000000204C00003098000040E401C
+:102F100000051300000617C000071C8000082140B0
+:102F200000092600000A2AC0000B2F80000C344044
+:102F3000000D3900000E3DC0000F428000104740D8
+:102F400000114C00001250C00013558000145A406C
+:102F500000155F00001663C00017688000186D4000
+:102F600000197200001A76C0001B7B80001C804094
+:102F7000001D8500001E89C0001F8E800020934028
+:102F80000000200000004000000060000000800001
+:102F90000000A0000000C0000000E00000010000F0
+:102FA00000012000000140000001600000018000DD
+:102FB0000001A0000001C0000001E00000020000CC
+:102FC00000022000000240000002600000028000B9
+:102FD0000002A0000002C0000002E00000030000A8
+:102FE0000003200000034000000360000003800095
+:102FF0000003A0000003C0000003E0000004000084
+:103000000004200000044000000460000004800070
+:103010000004A0000004C0000004E000000500005F
+:10302000000520000005400000056000000580004C
+:103030000005A0000005C0000005E000000600003B
+:103040000006200000064000000660000006800028
+:103050000006A0000006C0000006E0000007000017
+:103060000007200000074000000760000007800004
+:103070000007A0000007C0000007E00000080000F3
+:1030800000082000000840000008600000088000E0
+:103090000008A0000008C0000008E00000090000CF
+:1030A00000092000000940000009600000098000BC
+:1030B0000009A0000009C0000009E000000A0000AB
+:1030C000000A2000000A4000000A6000000A800098
+:1030D000000AA000000AC000000AE000000B000087
+:1030E000000B2000000B4000000B6000000B800074
+:1030F000000BA000000BC000000BE000000C000063
+:10310000000C2000000C4000000C6000000C80004F
+:10311000000CA000000CC000000CE000000D00003E
+:10312000000D2000000D4000000D6000000D80002B
+:10313000000DA000000DC000000DE000000E00001A
+:10314000000E2000000E4000000E6000000E800007
+:10315000000EA000000EC000000EE000000F0000F6
+:10316000000F2000000F4000000F6000000F8000E3
+:10317000000FA000000FC000000FE00000100000D2
+:1031800000102000001040000010600000108000BF
+:103190000010A0000010C0000010E00000110000AE
+:1031A000001120000011400000116000001180009B
+:1031B0000011A0000011C0000011E000001200008A
+:1031C0000012200000124000001260000012800077
+:1031D0000012A0000012C0000012E0000013000066
+:1031E0000013200000134000001360000013800053
+:1031F0000013A0000013C0000013E0000014000042
+:10320000001420000014400000146000001480002E
+:103210000014A0000014C0000014E000001500001D
+:10322000001520000015400000156000001580000A
+:103230000015A0000015C0000015E00000160000F9
+:1032400000162000001640000016600000168000E6
+:103250000016A0000016C0000016E00000170000D5
+:1032600000172000001740000017600000178000C2
+:103270000017A0000017C0000017E00000180000B1
+:10328000001820000018400000186000001880009E
+:103290000018A0000018C0000018E000001900008D
+:1032A000001920000019400000196000001980007A
+:1032B0000019A0000019C0000019E000001A000069
+:1032C000001A2000001A4000001A6000001A800056
+:1032D000001AA000001AC000001AE000001B000045
+:1032E000001B2000001B4000001B6000001B800032
+:1032F000001BA000001BC000001BE000001C000021
+:10330000001C2000001C4000001C6000001C80000D
+:10331000001CA000001CC000001CE000001D0000FC
+:10332000001D2000001D4000001D6000001D8000E9
+:10333000001DA000001DC000001DE000001E0000D8
+:10334000001E2000001E4000001E6000001E8000C5
+:10335000001EA000001EC000001EE000001F0000B4
+:10336000001F2000001F4000001F6000001F8000A1
+:10337000001FA000001FC000001FE0000020000090
+:10338000002020000020400000206000002080007D
+:103390000020A0000020C0000020E000002100006C
+:1033A0000021200000214000002160000021800059
+:1033B0000021A0000021C0000021E0000022000048
+:1033C0000022200000224000002260000022800035
+:1033D0000022A0000022C0000022E0000023000024
+:1033E0000023200000234000002360000023800011
+:1033F0000023A0000023C0000023E0000024000000
+:1034000000242000002440000024600000248000EC
+:103410000024A0000024C0000024E00000250000DB
+:1034200000252000002540000025600000258000C8
+:103430000025A0000025C0000025E00000260000B7
+:1034400000262000002640000026600000268000A4
+:103450000026A0000026C0000026E0000027000093
+:103460000027200000274000002760000027800080
+:103470000027A0000027C0000027E000002800006F
+:10348000002820000028400000286000002880005C
+:103490000028A0000028C0000028E000002900004B
+:1034A0000029200000294000002960000029800038
+:1034B0000029A0000029C0000029E000002A000027
+:1034C000002A2000002A4000002A6000002A800014
+:1034D000002AA000002AC000002AE000002B000003
+:1034E000002B2000002B4000002B6000002B8000F0
+:1034F000002BA000002BC000002BE000002C0000DF
+:10350000002C2000002C4000002C6000002C8000CB
+:10351000002CA000002CC000002CE000002D0000BA
+:10352000002D2000002D4000002D6000002D8000A7
+:10353000002DA000002DC000002DE000002E000096
+:10354000002E2000002E4000002E6000002E800083
+:10355000002EA000002EC000002EE000002F000072
+:10356000002F2000002F4000002F6000002F80005F
+:10357000002FA000002FC000002FE000003000004E
+:10358000003020000030400000306000003080003B
+:103590000030A0000030C0000030E000003100002A
+:1035A0000031200000314000003160000031800017
+:1035B0000031A0000031C0000031E0000032000006
+:1035C00000322000003240000032600000328000F3
+:1035D0000032A0000032C0000032E00000330000E2
+:1035E00000332000003340000033600000338000CF
+:1035F0000033A0000033C0000033E00000340000BE
+:1036000000342000003440000034600000348000AA
+:103610000034A0000034C0000034E0000035000099
+:103620000035200000354000003560000035800086
+:103630000035A0000035C0000035E0000036000075
+:103640000036200000364000003660000036800062
+:103650000036A0000036C0000036E0000037000051
+:10366000003720000037400000376000003780003E
+:103670000037A0000037C0000037E000003800002D
+:10368000003820000038400000386000003880001A
+:103690000038A0000038C0000038E0000039000009
+:1036A00000392000003940000039600000398000F6
+:1036B0000039A0000039C0000039E000003A0000E5
+:1036C000003A2000003A4000003A6000003A8000D2
+:1036D000003AA000003AC000003AE000003B0000C1
+:1036E000003B2000003B4000003B6000003B8000AE
+:1036F000003BA000003BC000003BE000003C00009D
+:10370000003C2000003C4000003C6000003C800089
+:10371000003CA000003CC000003CE000003D000078
+:10372000003D2000003D4000003D6000003D800065
+:10373000003DA000003DC000003DE000003E000054
+:10374000003E2000003E4000003E6000003E800041
+:10375000003EA000003EC000003EE000003F000030
+:10376000003F2000003F4000003F6000003F80001D
+:10377000003FA000003FC000003FE000003FE0012C
+:1037800000000000000001FF0000020000007FF8C0
+:1037900000007FF8000002920000350000000001E8
+:1037A0000000000300BEBC200000000300BEBC20DF
+:1037B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
+:1037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:1037D000FFFFFFFF00000000FFFFFFFF00000000F1
+:1037E000FFFFFFFF0000000300BEBC20FFFFFFFF44
+:1037F00000000000FFFFFFFF00000000FFFFFFFFD1
+:103800000000000300BEBC2000002000000040C0FB
+:1038100000006180000082400000A3000000C3C0DF
+:103820000000E4800001054000012600000146C0C0
+:1038300000016780000188400001A9000001C9C0A3
+:103840000001EA8000020B4000022C0000024CC084
+:1038500000026D8000028E400002AF000002CFC067
+:103860000002F0800003114000033200000352C048
+:1038700000037380000394400003B5000003D5C02B
+:103880000003F6800004174000043800000458C00C
+:103890000004798000049A40000080000001038049
+:1038A0000001870000020A8000028E0000031180E0
+:1038B000000395000004188000049C0000051F8090
+:1038C0000005A300000626800006AA0000072D8040
+:1038D0000007B100000834800008B80000093B80F0
+:1038E0000009BF00000A4280000AC600000B4980A0
+:1038F000000BCD00000C5080000CD400000D578050
+:10390000000DDB0000007FF800007FF8000003E5F9
+:10391000000015000000190000000000FFFFFFFF7D
+:103920004000000040000000400000004000000097
+:103930004000000040000000400000004000000087
+:103940004000000040000000400000004000000077
+:103950004000000040000000400000004000000067
+:103960004000000040000000400000004000000057
+:103970004000000040000000400000004000000047
+:103980004000000040000000400000004000000037
+:103990004000000040000000400000004000000027
+:1039A00000007FF800007FF8000003C80000150049
+:1039B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
+:1039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:1039D00040000000400000004000000040000000E7
+:1039E00040000000400000004000000040000000D7
+:1039F00040000000400000004000000040000000C7
+:103A000040000000400000004000000040000000B6
+:103A100040000000400000004000000040000000A6
+:103A20004000000040000000400000004000000096
+:103A30004000000040000000400000004000000086
+:103A40004000000040000000400000004000000076
+:103A500000001000000020800000310000004180C4
+:103A600000005200000062800000730000008380AC
+:103A7000000094000000A4800000B5000000C58094
+:103A80000000D6000000E6800000F700000107807B
+:103A90000001180000012880000139000001498060
+:103AA00000015A0000016A8000017B0000018B8048
+:103AB00000019C000001AC800001BD000001CD8030
+:103AC0000001DE000001EE800001FF0000007FF831
+:103AD00000007FF800000207000035001000000021
+:103AE000000028AD000000000001000100350804BE
+:103AF000CCCCCCC1FFFFFFFFFFFFFFFF7058103C95
+:103B000000000000CCCC0201CCCCCCCC00000000EA
+:103B1000FFFFFFFF400000004000000040000000E9
+:103B20004000000040000000400000004000000095
+:103B30004000000040000000400000004000000085
+:103B40004000000040000000400000004000000075
+:103B50004000000040000000400000004000000065
+:103B60004000000040000000400000004000000055
+:103B70004000000040000000400000004000000045
+:103B80004000000040000000400000004000000035
+:103B900040000000000E01B7011600D60000FFFF34
+:103BA000000000000000FFFF000000000000FFFF19
+:103BB000000000000000FFFF000000000000FFFF09
+:103BC000000000000000FFFF000000000000FFFFF9
+:103BD000000000000000FFFF0000000000100000D7
+:103BE00000000000007201BB012300F30000FFFF92
+:103BF000000000000000FFFF000000000000FFFFC9
+:103C0000000000000000FFFF000000000000FFFFB8
+:103C1000000000000000FFFF000000000000FFFFA8
+:103C2000000000000000FFFF000000000010000086
+:103C300000000000FFFFFFF3320FFFFF0C30C30C4A
+:103C4000C30C30C3CF3CF300F3CF3CF30000CF3CB8
+:103C5000CDCDCDCDFFFFFFF130EFFFFF0C30C30C1A
+:103C6000C30C30C3CF3CF300F3CF3CF30001CF3C97
+:103C7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C85
+:103C8000C30C30C3CF3CF300F3CF3CF30002CF3C76
+:103C9000CDCDCDCDFFFFF4061CBFFFFF0C30C3051B
+:103CA000C30C30C3CF300014F3CF3CF30004CF3C3F
+:103CB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C59
+:103CC000C30C30C3CF3CF300F3CF3CF30008CF3C30
+:103CD000CDCDCDCDFFFFFFFA302FFFFF0C30C30C51
+:103CE000C30C30C3CF3CF300F3CF3CF30010CF3C08
+:103CF000CDCDCDCDFFFFFFF731EFFFFF0C30C30C73
+:103D0000C30C30C3CF3CF300F3CF3CF30020CF3CD7
+:103D1000CDCDCDCDFFFFFFF5302FFFFF0C30C30C15
+:103D2000C30C30C3CF3CF300F3CF3CF30040CF3C97
+:103D3000CDCDCDCDFFFFFFF3310FFFFF0C30C30C16
+:103D4000C30C30C3CF3CF300F3CF3CF30000CF3CB7
+:103D5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF8
+:103D6000C30C30C3CF3CF300F3CF3CF30001CF3C96
+:103D7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C84
+:103D8000C30C30C3CF3CF300F3CF3CF30002CF3C75
+:103D9000CDCDCDCDFFFFF4061CBFFFFF0C30C3051A
+:103DA000C30C30C3CF300014F3CF3CF30004CF3C3E
+:103DB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C58
+:103DC000C30C30C3CF3CF300F3CF3CF30008CF3C2F
+:103DD000CDCDCDCDFFFFFFFA302FFFFF0C30C30C50
+:103DE000C30C30C3CF3CF300F3CF3CF30010CF3C07
+:103DF000CDCDCDCDFFFFFFF730EFFFFF0C30C30C73
+:103E0000C30C30C3CF3CF300F3CF3CF30020CF3CD6
+:103E1000CDCDCDCDFFFFFFF5304FFFFF0C30C30CF4
+:103E2000C30C30C3CF3CF300F3CF3CF30040CF3C96
+:103E3000CDCDCDCDFFFFFFF331EFFFFF0C30C30C35
+:103E4000C30C30C3CF3CF300F3CF3CF30000CF3CB6
+:103E5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF7
+:103E6000C30C30C3CF3CF300F3CF3CF30001CF3C95
+:103E7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C83
+:103E8000C30C30C3CF3CF300F3CF3CF30002CF3C74
+:103E9000CDCDCDCDFFFFF4061CBFFFFF0C30C30519
+:103EA000C30C30C3CF300014F3CF3CF30004CF3C3D
+:103EB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C57
+:103EC000C30C30C3CF3CF300F3CF3CF30008CF3C2E
+:103ED000CDCDCDCDFFFFFFFA302FFFFF0C30C30C4F
+:103EE000C30C30C3CF3CF300F3CF3CF30010CF3C06
+:103EF000CDCDCDCDFFFFFF97056FFFFF0C30C30C7D
+:103F0000C30C30C3CF3CC000F3CF3CF30020CF3C08
+:103F1000CDCDCDCDFFFFFFF5310FFFFF0C30C30C32
+:103F2000C30C30C3CF3CF300F3CF3CF30040CF3C95
+:103F3000CDCDCDCDFFFFFFF3320FFFFF0C30C30C13
+:103F4000C30C30C3CF3CF300F3CF3CF30000CF3CB5
+:103F5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF6
+:103F6000C30C30C3CF3CF300F3CF3CF30001CF3C94
+:103F7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C82
+:103F8000C30C30C3CF3CF300F3CF3CF30002CF3C73
+:103F9000CDCDCDCDFFFFF4061CBFFFFF0C30C30518
+:103FA000C30C30C3CF300014F3CF3CF30004CF3C3C
+:103FB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C56
+:103FC000C30C30C3CF3CF300F3CF3CF30008CF3C2D
+:103FD000CDCDCDCDFFFFFF8A042FFFFF0C30C30CEA
+:103FE000C30C30C3CF3CC000F3CF3CF30010CF3C38
+:103FF000CDCDCDCDFFFFFF9705CFFFFF0C30C30C1C
+:10400000C30C30C3CF3CC000F3CF3CF30020CF3C07
+:10401000CDCDCDCDFFFFFFF5310FFFFF0C30C30C31
+:10402000C30C30C3CF3CF300F3CF3CF30040CF3C94
+:10403000CDCDCDCDFFFFFFF3300FFFFF0C30C30C14
+:10404000C30C30C3CF3CF300F3CF3CF30000CF3CB4
+:10405000CDCDCDCDFFFFFFF1300FFFFF0C30C30CF6
+:10406000C30C30C3CF3CF300F3CF3CF30001CF3C93
+:10407000CDCDCDCDFFFFFFF6305FFFFF0C30C30C81
+:10408000C30C30C3CF3CF300F3CF3CF30002CF3C72
+:10409000CDCDCDCDFFFFF4061CBFFFFF0C30C30517
+:1040A000C30C30C3CF300014F3CF3CF30004CF3C3B
+:1040B000CDCDCDCDFFFFFFF2304FFFFF0C30C30C55
+:1040C000C30C30C3CF3CF300F3CF3CF30008CF3C2C
+:1040D000CDCDCDCDFFFFFFFA302FFFFF0C30C30C4D
+:1040E000C30C30C3CF3CF300F3CF3CF30010CF3C04
+:1040F000CDCDCDCDFFFFFF97040FFFFF0C30C30CDC
+:10410000C30C30C3CF3CC000F3CF3CF30020CF3C06
+:10411000CDCDCDCDFFFFFFF5300FFFFF0C30C30C31
+:10412000C30C30C3CF3CF300F3CF3CF30040CF3C93
+:10413000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C47
+:10414000C30C30C3CF3CF3CCF3CF3CF30000CF3CE7
+:10415000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C27
+:10416000C30C30C3CF3CF3CCF3CF3CF30001CF3CC6
+:10417000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C07
+:10418000C30C30C3CF3CF3CCF3CF3CF30002CF3CA5
+:10419000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE7
+:1041A000C30C30C3CF3CF3CCF3CF3CF30004CF3C83
+:1041B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC7
+:1041C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5F
+:1041D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA7
+:1041E000C30C30C3CF3CF3CCF3CF3CF30010CF3C37
+:1041F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C87
+:10420000C30C30C3CF3CF3CCF3CF3CF30020CF3C06
+:10421000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C66
+:10422000C30C30C3CF3CF3CCF3CF3CF30040CF3CC6
+:10423000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C46
+:10424000C30C30C3CF3CF3CCF3CF3CF30000CF3CE6
+:10425000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C26
+:10426000C30C30C3CF3CF3CCF3CF3CF30001CF3CC5
+:10427000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C06
+:10428000C30C30C3CF3CF3CCF3CF3CF30002CF3CA4
+:10429000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE6
+:1042A000C30C30C3CF3CF3CCF3CF3CF30004CF3C82
+:1042B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC6
+:1042C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5E
+:1042D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA6
+:1042E000C30C30C3CF3CF3CCF3CF3CF30010CF3C36
+:1042F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C86
+:10430000C30C30C3CF3CF3CCF3CF3CF30020CF3C05
+:10431000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C65
+:10432000C30C30C3CF3CF3CCF3CF3CF30040CF3CC5
+:10433000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C45
+:10434000C30C30C3CF3CF3CCF3CF3CF30000CF3CE5
+:10435000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C25
+:10436000C30C30C3CF3CF3CCF3CF3CF30001CF3CC4
+:10437000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C05
+:10438000C30C30C3CF3CF3CCF3CF3CF30002CF3CA3
+:10439000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE5
+:1043A000C30C30C3CF3CF3CCF3CF3CF30004CF3C81
+:1043B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC5
+:1043C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5D
+:1043D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA5
+:1043E000C30C30C3CF3CF3CCF3CF3CF30010CF3C35
+:1043F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C85
+:10440000C30C30C3CF3CF3CCF3CF3CF30020CF3C04
+:10441000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C64
+:10442000C30C30C3CF3CF3CCF3CF3CF30040CF3CC4
+:10443000CDCDCDCD0010000000070100000281703D
+:10444000000B81980002025000010270000F0280F0
+:1044500000010370000800000008008000028100D5
+:10446000000B8128000201E0000102000007021099
+:1044700000020280000F0000000800F000028170BE
+:10448000000B81980002025000010270000B828034
+:1044900000080338001000000008010000028180BD
+:1044A000000B81A80002026000018280000E829849
+:1044B0000008038000028000000B8028000200E05A
+:1044C000000101000000811000000118CCCCCCCC10
+:1044D000CCCCCCCCCCCCCCCCCCCCCCCC000020002C
+:1044E000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC0C
+:1044F00000002000CCCCCCCCCCCCCCCCCCCCCCCC0C
+:10450000CCCCCCCC0000200000000000000000005B
+:104510001F8B08000000000000FFFB51CFC0F0031C
+:104520008A45D91918FC3811FCA18059981918D856
+:10453000809803883D80B8819181A1919178FDDABE
+:10454000620876BF3003C36E20E611029A23821000
+:104550009F0254F306C85F0F15B312656038263A00
+:10456000F07EA706DE2A8D29364512C1DE86451E5D
+:10457000196F4793FF2289CADF4140FF40632965D5
+:1045800054BE9D22845EA604A1A5D1E4EDA1F2D77C
+:10459000A1FE9251C66EEE0DA83C00F85C49656024
+:1045A00003000000000000001F8B08000000000056
+:1045B00000FFED7D0B7854D5B5F03E73CE9C994944
+:1045C000CE4C4E4212F2224C1288A0210CAF808AAF
+:1045D0007F270122F539202858D40142087983D455
+:1045E0004BAFEDCD8424101135F447058B76885000
+:1045F000D1A20D34D260C10E20147B6D6FF0FAC0D1
+:10460000EAF50B4841312FB1207EC5CBBFD6DAE7A2
+:1046100064E64C2680D8DBAFFFFFFDB4B8D9E7ECE9
+:10462000B3F7DAEBB5D75A7BED3D92750293BFC76E
+:10463000D845FC03E54F4D8CB109C1F26766F680A1
+:104640002787B1C9BDFE3A473C63556D193BA29D12
+:104650008C25EC9921142850FED5232C5082DFBFE5
+:1046600065C397F0FFB619423E7C97D0E911E6C3C7
+:10467000FBE4D5026B873A939C310CEA8CB9194B59
+:10468000642C6B12A33F224B8D82FFE07325398F80
+:10469000B134FC2774754661AEC078C6321E535CD7
+:1046A000D4D0A93815783F847FC6D2BC25B731074E
+:1046B00063CF03BCC971F0BC5A3ADE61E5EF2EC28C
+:1046C000DFA1F33A6ACD58AE303E7732A789654113
+:1046D000BF3EE3F3AC46633D9BD9E34F46C33FEC9B
+:1046E000CC7E518C308F13B18C013CCB540E2F6398
+:1046F000BDB26754101F9B6A58A2322C580F2F85E9
+:1047000065873356035E97ED165C16F8FE396C2FFD
+:1047100031E6D7BE6BD6EA153E5962A3A10404B5B3
+:10472000E4F4EF6711CBBF11F1FE302BA0B24AEADF
+:10473000955580AFAA5A76FB95FEED673389E8540C
+:1047400029B9F65B61FCDE5AE66A86F19799D502D3
+:10475000AC2FFB91D3E5837A6663472183FAD03689
+:10476000818919C1EFAF009EDB917F001E2A2BA526
+:10477000DE420674ECDD2BB0E60C1C87F7BB6C77D1
+:1047800006F3650C0CE758662638E732413A89741F
+:10479000713007D2C1BC24F38942A8CE54DCF3B0F7
+:1047A0007F9FE29D87EDF4E7490BE638BD0057F2A5
+:1047B0005066A057B1B53A9D653256EA692944BEA4
+:1047C00038B5EC8D5558029E1324C0F77C8BA70892
+:1047D000FBA998579DCD80A7E659188D3FB42DFFB2
+:1047E0003309F80CBAF3C5C4213F31763C844FF04D
+:1047F000CFF1115A5D1C98DE972B8BB01F09F10584
+:104800007217011F3F42A026E0284D543A57FC2959
+:104810006BD8A0D0FA5B59C3C66900E511BC0C3F48
+:1048200061AC4308E54BBD1CBA3BFFB0943B303C48
+:10483000FFD3F30474127EAB00B7C81F1576D9BF3F
+:1048400012F861CAABE6C0F7803F2A360B7E0BD464
+:104850004DAFDBE87DF7265E0FD86537F24FD716F0
+:10486000A80BF0BDA5FDF11B91BF5E155933763B3A
+:1048700022CA84FAE5A4063B1B0F75C047B18D57C9
+:104880002B36EFBB1FBF2F69B3301BF457B17BF141
+:104890001D37427DF16133C326155B6BE514A82FEC
+:1048A000F10B2D58EF29E0F0F97689FEADD0BEC7A7
+:1048B000D19E381BE873BAC6CA9C326375F6F6C43B
+:1048C00059C067A5FE1D85F85DE976C185689FF230
+:1048D000EAD643C938AF17B97C976D8B664E1D7FFA
+:1048E000F0F764AB18F81EBC5F06F364D0EF62D635
+:1048F00054887AB062EB3AD9690FE2EB748D4AE3DF
+:10490000F4C9DF8B300E7C57F98AE0C229569A9899
+:1049100017E5B07BB76DCEF30ACEAF56CEB6E3BC8B
+:1049200056CBD86EB17FFE2E54CDA5FECD7221BCE4
+:104930002FDDB4592E0E91DBB26D838C706DC81AC9
+:10494000EC8D20D7417880D7B283F552D403A80FDD
+:1049500025BF3C2384CF2A8558E2CBB26D22731A3F
+:10496000F888D3DDF72EFC13F0E5DB6B27BCEA7487
+:10497000EBD3A71ADDCEA81A1DA5DEBC1911F8F8D5
+:1049800071A403C0D384788272AD069F6332CB9743
+:10499000A07F879BA902BB3C5F3699D97C0663F553
+:1049A000B007DDD2F55097D952E682F550FAB17BC7
+:1049B0002AD49304EF67389F7AC15BC2D7AB9624A1
+:1049C0000FE07995C0E6E0FC8F21D030AF55C9C02B
+:1049D0009F80F7A66979CF8B82067B3CD68B7FB10F
+:1049E0002683FA3943FD98A19FACCBF7A3164E322C
+:1049F000F4A31696E8FDFC8DFAB15D593F4D85375D
+:104A000018E1292CD5FB910468576FBFB279A937FB
+:104A10004F36C2737339F5133BD5C5BC0AAEE71ADE
+:104A20003FB076B708EF95EDB163D7B050BE2850D0
+:104A30000580DB0E5212CA173193A20C7C18EB8E44
+:104A400033D4A127F5E47541FD138895697C394578
+:104A500026BD909F62A5FA43290AE985876EF05E1C
+:104A600083EB208ECD92A12E7B47AB11F81AE01478
+:104A7000581296601724F57FBFDACCF150907A2156
+:104A8000FB187C5F65EACD8E85FA35A6FC6B116F4D
+:104A90002E81EBE528915563BB280B23FDB43A2307
+:104AA000EF795F089E1A8700FD8560BF8D666F12E3
+:104AB000F2D7F8DA677C12C0B76A08CC2705BA12B9
+:104AC0009E09F8603D5A3DA43809F1699141BE4301
+:104AD000C79761FC1C1AFF06C4A31BC74FE83FBE63
+:104AE000257392617C6B7A89617CAB0CE303BF4FC9
+:104AF000AD6DD6C607FCDDC0D834A199C6B7A49762
+:104B0000D0F8AB655662183FAA6FFC5B70FE9E81C1
+:104B1000E69F798371FEE9A5C6F9CB7CFEB36A5F97
+:104B2000D2C68FA2F9CF165EE2F34F2FE5F3B7F0AE
+:104B30007EFBC677F4E1FF5E9CBF7780F12D599331
+:104B40008DF31F5A6E9CBF858F5F54BB531B5FA1B3
+:104B5000F117093BF9FC8796D3F8B2C5EB423E92B8
+:104B600053A3AAFD684FA481400C261DE5A672043C
+:104B70001805A01F860A9904C743519CEFCE450132
+:104B8000BF29417DC7FC2051A0CF2A359E2FDB9E37
+:104B90002FA39EA5F7896837F13F456D22AD376C8D
+:104BA000BDC53F1CE0ED6E137D582F5A7F935FA467
+:104BB000F58EDBE560C605F0F95F9E1CD51C3AAFAB
+:104BC000F0725193F96487418E383CBE0236A21AC6
+:104BD000E06B47269810AC9F043D0AC62F3B0E7A27
+:104BE00014CB53666E8F9C003DCBE450B9A9E5F61B
+:104BF000888FBD9303F3BA5B83FFA4C4F17D72B9C0
+:104C0000E047FC9F5BB75446FDB4A8098CE91079D6
+:104C1000AFD2E8D4BBDBE26F16089F4EC4CF3D2471
+:104C20008A8CFD9766D72FDE30C8F0DD3CE66F48F2
+:104C300082F60BD7CE1FA2C2FC7F30C73216ED53CF
+:104C400090845413C9314B35816F31A7759D391547
+:104C50002AF7CC311BECFAB95E63FD0725C67AB79B
+:104C6000D96F36A1BDB144609BA1DFFBAA8DEFF5E2
+:104C7000713609719CAEDA7877277278EFC3722C9F
+:104C80003E5689AEF7ABFC5B1D9EAA87CD2C40EB50
+:104C9000654702433AFA12C85EF3AA7CDEE1F0DE11
+:104CA0006FB6BA3D00CFFD3F12099FE1F077BC1E01
+:104CB000ED36811DD7B1E14B33DAB7E1F30987FF58
+:104CC0008115E1F35165D4F7F37DE1CF399F84F38A
+:104CD00053555BFEA01321ED2A5ABE3FE844087FDE
+:104CE000956D9B61A82FF1CF35B45FBC61BEE1FD2E
+:104CF000A2A62586F70B1B971AEAF37D3F32B47FF5
+:104D00006045ADE1FD7DD58F18DEFFA0649DA13E1D
+:104D1000D7BBD1D0FE9E399B0DEF4DAF8FBC13E5B5
+:104D2000A8EE5D91E1BA715639F938DA836715C991
+:104D300085F4F8B42689E4E0748D93CAEEB6715612
+:104D40002FD783C50C4C9C5EE19CAF7132EA65465F
+:104D5000FAF3AFC2059F0FEA7F139C843F7183CCA7
+:104D600002C0C2028BEBE3E35E31E47DC765DE6F18
+:104D700000411FD7FFBDD811F97955F3FCA16A0492
+:104D8000FF2128B72C15D7B91E6D7D0F7F5F2E3000
+:104D90004FE873C656929CD769EB4CB9CCF541F9F4
+:104DA000CEE402F4BFCBE54076F5A5C66B01A4A224
+:104DB0009E44EB3C01F901A4C0C02F5906F9EEDC7A
+:104DC00027125C95A81340AFAE639EC126D43381F1
+:104DD00003E9778D4238DC49546F4BA075BDB3664B
+:104DE000FAA01312D2C743E5A73573A83C59E3A52F
+:104DF000F2444D0995C76BAAA9ECA85941E5C735FE
+:104E00003E2A3FAA69A4F2CF354D541EADD940E5E4
+:104E10007B357E2ABB6BDC54F6F92BBAFE8DD7ECC2
+:104E200055CDAF809587EA67B4B9D443DB769273EA
+:104E30005712CAF919E55C36DAE3678E8263993155
+:104E400030BEC2F96D603ABAC95E29F603FDC7F5F6
+:104E50007F6F8BE274B299D87470A6D923C37FE1B7
+:104E60005A9043750959061624D70C7B847E61ED50
+:104E7000437A5D8E4ECCDD9B3B13E871F299BFE522
+:104E800061BF75DAFA177540A47598059E7721BD44
+:104E900042F046EB5AEFAB9ABEBF0CFEBAFAF0D71F
+:104EA0009E8EFEFB4141A5FECFB45A988478DC1358
+:104EB000ED07E667670E3FEF40795C9664524F441A
+:104EC000C0835E56B464A84AE8FAD366AC9F691200
+:104ED000A6B7D07AEC8C99350AF94A554F0C43FAAB
+:104EE0002751A9F7B32C49564F80BC9EDE9615C3B7
+:104EF000D76F3F5F07B7C712BF825F48EDFFDEF095
+:104F00000CD48F0E0F63ADEC132BEA037897F5EDFD
+:104F1000FD7226FD95E2576C8FF91CDA0B16F87BB3
+:104F200091E20712D5F57EAB5A449F65343EDF6EA1
+:104F3000180FBE73EA3EF7C5CC4BF1ADC44E86C424
+:104F400011D669F1C6B26D36D5B8AEC41AEA556D40
+:104F5000C9AA619DC17F80FCB36A4142BE29D7B80E
+:104F6000A847521A0580AFDCE4A47EAB04DEAEC2D3
+:104F7000DA217BE151572BA7DB40F09DAE39EC9451
+:104F800040DE4BACE001027C252D23A7A29EEB6AFC
+:104F9000AD4B447BB04C3CF39027C2F73B4D028DA8
+:104FA000B7C46FEE35AEA31A7F30E8577F4E7E163A
+:104FB000534E86D43B4DDCCE0EEFF780D6EFE5F0B6
+:104FC00053B9FD48E18DCEFE78AA6CFB42F6921CE7
+:104FD000C1FFF28278D2F1576EF21C407D5ABAEDD1
+:104FE00018D9A39F9A7DD90F5F423FF59F9F9244A6
+:104FF00071527D5E3E3029619C055A7C17F8F79E00
+:105000000F613DFDECDFCD6C0DC0C72E402B786FDE
+:10501000D65F331333417DA1565BD05A4671DDCF45
+:105020004CDC8E2A621E07D18135E5A11DD9C54C05
+:10503000D3114F5DEC6DC7B8103A9C32C9A4671606
+:10504000361AED18B07F0DF5C51B8CF5623633119D
+:10505000F549F17A33F30B343FC3FBF74D2AE17F77
+:1050600031AB5E85EBAAA4F9230B5426A5027C156F
+:10507000BF79366F3EC65F4CDC0FD1E3234BE2387D
+:10508000FCA5F17ED90DEF3F691D77F78D48068BA2
+:105090007F15C689580C736D65FDF1FB6DE10F87B7
+:1050A000575FAFFBC5693438C46D82DB1F817F2F2A
+:1050B000687CA6EBEB5B44D5E017DC8DF510BF21D7
+:1050C00046D4E2B2221391EE5DAAD5678AA1F71405
+:1050D000B7F7EDB4B8EA80DE3F3779068913C84EDA
+:1050E000C86521ED7E6EF2D2F34EE1AD62B45B99FC
+:1050F00014C8453B14D618E25359E30731CA918BC3
+:10510000F1663B837514E86F41F8A09F55F692DB7A
+:10511000582EC6BB41DEA1BFC71C858705A8DB94FE
+:105120005686FD59928CF17C9BD358AFC27F201DCF
+:1051300046308A3F458F90C2F01860A80FED2EE3ED
+:10514000F351E88491DD1F203E76108B43695502B0
+:10515000228CCF26499D7DFE5626FA7B1C7E8A2F07
+:1051600040FBE52A6F5FA9C5CF977F503038EE121C
+:10517000FAA8EA3C68904121753DBE7F5E62FE71EF
+:10518000DF416F3A61550DD19B734DDE69480FD4F5
+:1051900093089F00E3780D76609A1A2AE70BC2F80D
+:1051A000E3AAE1886706FD5D6EF2DE2D26F487E353
+:1051B000AAFB4FEAD7FF8248F3BCEAFE87F5EBBFB4
+:1051C0003252FF15BF7979970FF8A9F4574F3A80FB
+:1051D00099D9675253A20BE85EBEB5C18172F9A995
+:1051E000E473205D3FF38BD323C9E71651974FB784
+:1051F00022E411FF101F9D7EE9D13BD0AE3AB7D516
+:10520000AC527C609B256001A6AC6C5DC2E5639BE3
+:10521000E518AFAFFE02F9B3AACDA82F4A5F7832E6
+:1052200011E3CD4049CD7F0E907F50B9E52F8568C1
+:105230007755B15ED27BE1DFE1F8E7E3C81E982F36
+:10524000C7F47FAFEFF3556978A96A7DF40B9184B9
+:10525000A583FCCDF0F6259ABDFFA4688FA738DFA3
+:10526000443611F94CC707F3737BBFEEC5A7738FA4
+:10527000013C9D5BFEDD21E484F227D77B675A1653
+:10528000FEFC35E7C0F2D40D7A31D4AED6D76767CD
+:105290009BE6A7ECE165B939E0403FB07CB3D9E5C6
+:1052A00043BABEFCFC2F9EC1B8CC0716D770E8BF2E
+:1052B000ECE583EFDD00F5B21DE6F8DBF8341421F0
+:1052C0003148972AF8BB626C900EA5BF3E283B4739
+:1052D000F1E73F8E0BD2A36CC73E998DEA8F8F29E1
+:1052E0002DFBE40E25025D5A8E15A23F51F7E257C1
+:1052F00032EAAFCF5E17D8E08C08F8DC7C90EC6225
+:10530000C413D151A3531FDDC2DA57015D50BFEA68
+:10531000740A7FFF2F9AFEC7FE9C39C4CFAFBC86AC
+:10532000FB287FB6B870FE25AF3CE8C0799C92AAF6
+:10533000395F3FDB90E886714BCCBE44954AFEBC9A
+:10534000E4B91F12BF2D3EF2C3448A7F3077B28981
+:105350006C055F32CE6FD1A6D934BF62E625BE2B75
+:105360007956F4E0FEE059894DDF11412E5224AE0A
+:105370008F4F355B704D65A770E1C07D85B745FFE8
+:10538000568AFF2DA5F8CA0FF5FD20B68CEA67AD49
+:105390009C4E5F88FABE1AAC3CA1FCBA65753BD244
+:1053A000E7F410F7608C1B5731C9A7E143B808FD3B
+:1053B0008A47A60DE6F4614E294FFB0EF4FD147CDE
+:1053C0008EEDDBCD6E5BAEE13B76312338FE726D48
+:1053D0007C803B0AEDD5538960FF45985FA1A4AF5F
+:1053E00037605785F057887C7379DFF208976F5DD7
+:1053F000DEFD33A6E3FBBFBEC3E507BF437B05E08D
+:105400000A0CA6F7FB6609A40F2C2C1049AEB7981E
+:1054100035B936BED7F904E09670DDEDE317EC3F01
+:105420008EF04F766CF17AF82E445F56E1788EFE5E
+:10543000FDE972BB5893FF04C928FF6C1397FB81E9
+:10544000FD091F8F4B98FDBF7806E515E413F7AFF4
+:10545000CB5F367B70DE9F6F3FF0DEBD20A79FB72E
+:10546000E8726AD49FE1725AB273028B24A79F63D9
+:105470001A42243985E711E554E9203EFE47E94FF9
+:105480001D7F3785E14FD78703E1315C1FFE5974DB
+:1054900046D487F0E71D96D79FFF74BED3F9ADF4CD
+:1054A000971543293EA6F3A5CE777D7CA9F35DBF72
+:1054B00078A3017FE1EF2D188301B83CBBCD1447E1
+:1054C00028DFC3F77FE1BB43A9E3094F6E5AC658F3
+:1054D000D3A1D4F8D0BA3FACDE12D6DE1D56F78485
+:1054E000B5F786D5AB0DEDCBDB0EC83CAF256068BC
+:1054F00027AE78867D322812BFFAB95FDAFA85ECDA
+:1055000043BE507AE97BF34AE6B3633C7CAF48F193
+:10551000911EC0F12A18A7677B861FF3241A6C3CE2
+:10552000EED4A3F63AD05E6C88E5F5DE047915EA90
+:105530003DFD79AF8DC7F57A3CBD8ED810FBEDD817
+:105540001E91F476879F4D8FE467C28A4272D4C160
+:10555000067ACFE3FDD344257D05C65F9A441786BE
+:10556000748A6AEF71609E41CF9EAC3BE7C0F34501
+:105570006F8AB48DD883767B0C92C72D2587F877F8
+:105580009F32DF5393317EBF87FB79456BC3EC11AC
+:10559000B696F8A958592EA33E05BFECB871FF8204
+:1055A000CB45A9D65FC926E37BFD7BDCC145FBBDAE
+:1055B000748BF1BD578B0734EB7232868DD1FC7141
+:1055C0001E8FD2F4F23431E7CE39408F9EC322C30E
+:1055D000FDFB337B44A2C799ED7CBF9EE2F6D72347
+:1055E0007FF7923ED4F1D489F2240FACAF3A5FFD3D
+:1055F000AFBC87916F767D98FB33283B777D90FD1C
+:105600005BACFFE6FDF40F59FFF6535EB7D13E49A0
+:10561000CFEB76E2F79EBD7F4C7F18EBBB2D149F3E
+:10562000EE79FDAB5CE49F9E959612D4773D438066
+:10563000FE681FECFD2AB783D6D77AA2DB1F259917
+:10564000DB477BFEF6B1108F25CC0AED86D7A34948
+:105650009EAA5EB3513CAD67EF5779A176FF779D67
+:105660004FA5B67FD963677376227CB17CDFA7EA4A
+:10567000B7D73F5F8BF917ADFBE485F07ECAEFBE6D
+:10568000C9453DDAB393DB43DDE68EE7707FEE6814
+:10569000FDDC9566C073370A550AAC9B0DCF14A08C
+:1056A000DCF4C7CB371427BC527CF4FC5F830FC1FA
+:1056B000CDF59DDD6F1570DE5F7FFC21EA85D72D6E
+:1056C000C497FA7C3F6FA9257BE572F37698799CA5
+:1056D000E4FF9D790B812B99F728F33F37BD7F2D90
+:1056E00039892EE172D09FCFF73E44F597ED2E8297
+:1056F000F70AF9FDF67FF2F97F6BBAEF04BA3B2E99
+:105700003FEFF27FF2790F4CF737EFD7E8AE627ECA
+:105710004BD5EFBE21F8BEAD9E5BFB4F2EEF03CD08
+:105720005FB7EBD7985C4D99189F43AF01D669C519
+:105730003EB311C3856B46CC54D1CE14C3F62BF5C2
+:1057400072AF99FB4D22EE5B629C6F088FF331CDF7
+:105750008FA22D3D185A528AC98E959455DCBE965B
+:105760005CED6EC0CB9A6B17B82877888D3DEAC583
+:105770007ADA6417C5AFC3FCC97A81B905B06FA5E1
+:105780006B6F398CFE8D79842960C9A5F21896ABB0
+:10579000B5B8A459950D7E8F9263ACDB9CC6BA4513
+:1057A000EBCFCA38FCD624E6C7F8B43872BF8A7982
+:1057B0006DE218890950B7B1261FFA179624E3F74E
+:1057C0001B31C01E12CFBD5A3CF6F6E1716CBB1BFB
+:1057D000F138D244716B4A2E25BCB8FC6B789E8D93
+:1057E000D588D755ED884F09FD5F6E7F91DFCC34AA
+:1057F0007F59D2BA904698DC36633BCD4FBE2C9D84
+:10580000385DD2CB353A2D33D045A74304FA18E89A
+:10581000A2E3F9DBD2279C2EE1F8DF6F7612FE07B8
+:10582000A2974E9734C5CD505ECD9ABF3015FD4935
+:10583000ACA77918ED336BFE8214EF663EA493EAB1
+:1058400062482FF4DB02E0B7FD7EFBF31427EA7A0F
+:10585000E9D81D084FD96F456605FC756FB7B300D1
+:105860007E2FF965F4434B5B458AFB3329907757CC
+:10587000C8BEAF6EF797FDCA4EF329DD69F1DF06AA
+:10588000DF97EEFA2497ECB095BDE4D7F85E1238B6
+:10589000DD7D1DB9B8AF5B2A71FF239C5F62659EF9
+:1058A00027D0B93B7A0EC66D846D3CDFB6B4E51ED9
+:1058B000B3C5907F66D6DB915EF0BD2850BE13C2A3
+:1058C000179AE7A9FB1D9D2F0A1CBE36B31FF3765E
+:1058D0004BB7EDE8C6F853E9518B0BC3D255DBBE8D
+:1058E000A0FD8D29BF7AD9D141FEB668883FF4F377
+:1058F000FBB789C41F95AD15E487409DF8A2B2257A
+:1059000072FCEB72FE69D9AFF6EEF2010ACB7EFDB6
+:105910008203E35BA7DBB73AC8FFDF76E9B85B3FFA
+:105920003FBFE5914BFAF9A7F11FE0BFDC2087C527
+:1059300049B60D227F04E0CB8B94EFADF35BD9CB5E
+:10594000679FC33874E7CECF9F4378CBFFFBCBE78D
+:10595000D09F60AFDBD4AD889797DEA5389EFEDD83
+:105960002C99C79DBB5F7C81E29FDD1F80DF017F9B
+:10597000BAF79E4A477FB27BC7D789182F59BE779F
+:10598000DA609CEFF257A70C6611F4885E22DFFA0A
+:10599000AF20FE1A4EAF03AD07C8EFE9027AA3DFCE
+:1059A000D917B769A9E07130A716AFD91E39CEDD76
+:1059B0002F3ED37AD79D378DC7D2EC72B22B88D3C6
+:1059C000BC03741C7D05F4DBFE88E67F46A65F17EA
+:1059D000FE03E8B42C8C7E675B17FDFC197CD73A7C
+:1059E00068C0384DE00AF0A6C7D1BF27BB7F22A30D
+:1059F0007CEDFC25C5C5906EB7C144BB5F3E9B8E58
+:105A0000FB0F9F9A7BEFE7E7322C2AC61B4AF7BEB3
+:105A10004FF2D3FDEA118A53332D9EDDCDFAFEF00D
+:105A2000F8A3965359B5C5CEE33B1AFE31FEE37495
+:105A3000D0732DCEC3F9588FFF0C14F7699579DE1A
+:105A4000881EDFAFD8F2A1164F09D24B9884743A62
+:105A500076C9FD081D0F2AE26162681C33727CADB5
+:105A60002FDEADD10BE987F1CBBE3825D4D3306E14
+:105A7000E517DE6711F441F7661EFFEC3647CEA34B
+:105A8000D2E39ABF0A9753FF95C5332F07FFB7C5D7
+:105A90008F5F7652BFE178EABC10598FBF2DF37546
+:105AA000FFAAF7C5CA0543BE41B9C97B04F9B1A233
+:105AB000F598CCCFA5F0F352FA7C3BB5BCD1CE978C
+:105AC000448A77AD6A39407A3C5C5FE8FBA6E1F036
+:105AD0009ED0E0AD6CE3EB44E74EBB5F817E3AF7CE
+:105AE000EF267EAEDC7E8CE26D87B6FD5AEE08595D
+:105AF00057719DF087C0DFF9CABE5C1EB7E579EC2F
+:105B0000E1E39CD1F461D59EC8E3546DFFC2304EF1
+:105B100099AF45E6EBFDA5C73B2DB9EFC1FE4EB7EA
+:105B20009B19E6799E6E11A7473A17F5AEB66EEA55
+:105B3000E77E70BDA47CFD23FC5CCCF8B7A3281FD6
+:105B40007EF991E91FC6C463098487FE5A6B399FA9
+:105B5000B6FEC49D8AF46E3D72AF88EBD42EC46F3E
+:105B6000889D9FF74EF5143BE885BC8F3CE3915D23
+:105B7000C3F5CDC4A32603FC30CE605C07EAA11FA9
+:105B80003CA782F96E088FE8289C8EF088AA49B558
+:105B900009FDE761563C745E40EFD7AC1ACF03B005
+:105BA0000BE39CD84FD24C1E474CBE8B973EFD3C1E
+:105BB0004E7194BF0EE659A078D32CF07D927D7D76
+:105BC000C64186E7BF2651DE7696C5786EAC4B554A
+:105BD0007C26D0DFCFE46C5937D949F907D7584232
+:105BE000F30F582017F9516FD7EF7D587E421A7E78
+:105BF00002FD881A7C595A7EC210D621A07DBDC9EB
+:105C0000CECF270E55E24DF8FDF39ABDA99F3FEC8C
+:105C1000775E31EC9CE2E5CE27C64FC95F3AD405EA
+:105C2000FCB47ACF14CC5F8FBF277F47AA8A791242
+:105C30007F9E82E757E25FC81F930CF513AB1F9C52
+:105C40004AF5FFC81F930EF56F1AFF8DD7CB04CA14
+:105C5000572D583D7A2AF2EB55CBF92CC08851CEFE
+:105C6000EF40BC75793EBA7B9113F31F7A658E5F66
+:105C7000E6C176432671BCA5291FED403C0D357564
+:105C8000D4227FFE7CEF57B1A8179C4C25FCA8AC12
+:105C90005E45FAC1A349172F9147179E4FA6EB9374
+:105CA000CD8AF70184E391F923E85CE0332533AD35
+:105CB0003C5FCF98C7C0D478A26791464F84D31A6F
+:105CC000928FBF58F4C9FC5C4C93A6AFA6AA389E2D
+:105CD000E02B172F5EF7EDE17A50E74BED5C69C8DA
+:105CE00079C687105E9FE27DC892D0FF3CE31D1607
+:105CF000CF0A7C9F5C7C3E1DF95B3F9F187ECE9156
+:105D000049BDA648F65FB376CE7120783D56EF2A9E
+:105D10001C37F377CE9D8741BE4617C92E4CCD1C4C
+:105D2000BD627C82C4CF15529E439546BF24139713
+:105D300043F610A37DD61E8BE046BFB9E74195F42C
+:105D4000775AD16DE457F54467B4603E50CFC3FC39
+:105D50005C29664CA31C0DD9131340BF0FE4E05C13
+:105D6000981C9C33AE73C6717B2E3ADB3AA83F5524
+:105D7000EB0F0CB0C4E0B9E01E91EBE59E1A27C111
+:105D80003184F9F6E1FA7EA5E36DB518CFFD02DEA8
+:105D90005F40BCE878FFE5C0F47B45A3DF2B91E8CA
+:105DA000177EFE74BEC5FB6B6C7FAAF8D02A7415F3
+:105DB000C3CF9D86D3B54A6ADA88AE78E29E2F6853
+:105DC0009DD1E9367A852B411A64A0E3EBD8EFE840
+:105DD0003D5F98105E9D7E4F0F90EFFD070B5FCFEC
+:105DE000C2C74B9CD391E28DB4FE60102E2158CFD8
+:105DF000B5E6D1F8834D3CDED3BFBD10713ED07FF8
+:105E0000E6A5F2307355DE2FE0FFFD50BEFF10F126
+:105E10003F2222FE3F46BC03FE3FC6F65780FF4F9F
+:105E20002E857FDDAE2FD3F44219EE2B01FFFCC58A
+:105E300039333113C62D1415E2FF255B456D1FD292
+:105E40007D5B7262508F2CB9BE7A9F19F870C9B30E
+:105E500002F16991765EFD73ED5C4B785E5FF11C3B
+:105E60001FE9C9CBE7F7F9490F956D333EBF10E441
+:105E7000DB74CAC7F5F1F393A22617E1F83FA368D4
+:105E8000FAA228D6D02E9C0E43AA4D863CF0E429D7
+:105E90007DFD909F976472BE4FF1B53F9819C6077C
+:105EA000DC52FCF800E263BC3015FBCDD7E456EFC2
+:105EB0006FE80AE33A9FE1339EFBCB6A349EFB1BFB
+:105EC000DE9462687FCD864CC3FB91FE6B0DEFAF15
+:105ED000DB36D6501FD57283A1FDE8B602437D4C58
+:105EE000E01643FB7187671AEA13DAEF35B49F783F
+:105EF0007481E1FDF51DA586F7377EBACC50BFA9A8
+:105F0000F75F0DED038BB85EDC5F939486E70A7450
+:105F1000BCEC5F2A9B547CBE34DBA4E6863E4F7407
+:105F20003B73B1CC73A37F3590BC4CB126A785AE33
+:105F3000CFF9CC6CD06B53ACC67A8155E39774E043
+:105F40001720FECD56A35CA556CF6B02B39BA52CA4
+:105F50001946F9D2205FB758B97EBBC57A65FAED0C
+:105F60004E6C7FAA3240E7ECC3E54B44F9CAA2D29B
+:105F700047FBA9CC45F9961B6D463E4D1A40AFCC68
+:105F8000B31ACFC38BEA619B649013FDF9F9A8D0D3
+:105F9000E7C2E2DB286F67A07EE5A405B76E017D4E
+:105FA00029277BA9D49FAF9A638A9897F790F53BEE
+:105FB000FA491BFAD94F0F217EBB92DE7E0AF3CC41
+:105FC0002AE7F592BF946C31E22558770DE67954B3
+:105FD0004E7E8E50E5FFDC54D3782BAEF7FA3C179B
+:105FE0007D303311F303D206F09F5ED5E6F15C4DB0
+:105FF000C9AD45C3B03FD5147ABF457AA0AA10FDFC
+:1060000098A15A1EF453A6C8F94A3FD5FA198C0A2A
+:1060100014ED035521FBA0ABF8238704F3F8779325
+:10602000F7A7C8170B46B7E7F173CB6ED74CB2ABE7
+:1060300054825FD743E98AE729D42BE94912736672
+:10604000F48767F03C6F6306BCAF8F33B914AAF7CF
+:106050000A389EE5C78C0D82F1EAFF5B24F8EAF767
+:106060005F4FF93C16A59AE2A7FA3C99B6DFAFC795
+:106070008BCF26CD8A413CD65FDB776E8761FDAC46
+:10608000E26DC77ECFAE37D3B8F50582E1BD3E6F76
+:1060900069C31D741E2B5DE1F32E867923DC9634D3
+:1060A0000E57FD73024B23B8FEF7D243E8BFEC8ACC
+:1060B0007661BC0DF0B189E8EDCE3867D2270FF3D9
+:1060C000AA18A434AF21FB25B21FFA9695AFDB4C7A
+:1060D0009D9588F654F23546B8C5F566F20717C5A2
+:1060E0002A94AFE0AF59A1D1D538EF554933EF9C91
+:1060F0000BF0D4BD23324CFD7176342D3D04DF15F9
+:10610000B746BBFCCEFE78EF72723801EEB7106E68
+:10611000714321CD9BDA21DC3F17D83319C877DED4
+:10612000E944FF1413C37D9770F8FFD3CAE3C4EFAB
+:1061300058559A879C547CEB9641581691DC1DB5B6
+:106140000EB8CE7F68E5EBFC87D608EBFCE5EEFDEC
+:10615000289FD37E084BD16DD2ECDAEAEC507B1944
+:10616000F4D649EC57AF8B313FCEC57E07B6CB3C5A
+:106170004DD91997B7CBD01E43FED3EDB1BF5A8D81
+:106180007664889EFD4AD3B35F5DA19EBD80ED4ECF
+:10619000DD1B8868C724C891F5DC381BC77F952AAA
+:1061A00033CAE31B209E9F6D8B6C1F0EB40E5DCE19
+:1061B000CFC88CD6F954D7EFDCDF60C532ED2F9C09
+:1061C000D9E07F241BF729E38751DEED40FDA4AE23
+:1061D000F8830DF1ABE36D88CD884FC0A3D3C6F92A
+:1061E000C4698B640F96031E4D063C0EC7F603D997
+:1061F0008357ADDF4B8CE76EBA357C839E9771BCBD
+:10620000AEBB3ECEC3B845E5EC73A4E7AF7A9C398C
+:10621000C67544F7BF611C01E7DF7DD77F6B71B79F
+:106220000E8A17D5BD7A4D0CC6A72A0AFAF48695B0
+:10623000DB8599A407BB7659DC0867571CCFE7ECD0
+:10624000DA35F110C6393EAF399C2985D82D5DAFBE
+:106250001CC933437F5D3B8FE4499420E7277ED1FF
+:10626000DF575CFCCF3C8F123C27D0C76F56BE0E69
+:10627000ADB7F1F8C9D398C7369AB1F7A363F9FA65
+:1062800091687A1C9F47BFE3F3A17E7F5470E5C7F6
+:10629000002B26DD554C66ABE58DA600968F0A6E69
+:1062A00011E355BE91FC3C4D52161B9101FD284750
+:1062B000DB03088EA3A3D78DDB29EAA7EA3E2C0BCC
+:1062C00014EF02C47B5CAF2B097DFC37878DB3A133
+:1062D0005F214DE17AB7777E941FEF294A34B98F59
+:1062E00080AA67670E2F8CC5F77F8BE6F2F258D233
+:1062F00089265C8E7039A038D49B665ADF960D7162
+:10630000272F82EF974D88E77EE905987DC839965B
+:10631000C7E367091407B9007881E714FA023EB5AC
+:106320004BCC173316F4B089B955F00BEC9342EE11
+:10633000D9C1FF6876FC604DFFF6384D3E33E0452D
+:106340007619DBD509EE0C5C4F7781FC0D03FAB4AE
+:10635000D558A97CAD464D1806F2B8A72689EAAFF4
+:10636000D738A90CD48CA0E7FB6B5C548F36B5A74B
+:10637000D37A2C55AF9B87FEF5FD120BBDB723BC1E
+:10638000C47B568E87C8F9972EE69300AE2F353D15
+:1063900052FBD638E2AFA7C600D431FDBFFFD98A81
+:1063A0003F644D053D98FAA3C35953418E9F12781F
+:1063B000FE021E188E742E552F9F32B7C4A2A9F06C
+:1063C0006B1BF34D4DC2BCC8DE3F158E61CCF6E8A9
+:1063D0009FA64E1D09F3C7FDFE14C6F6DADEABC755
+:1063E00073D8A9FB3FAB8B81F9C86DFC3E9F8982B6
+:1063F000A756407D339BF30B933CB598CFD97337A9
+:1064000073E2FEBE3ECE5E1BB71376DBB89D3951FC
+:10641000E0FCC1E6CA5A1E416F6EE8BA11DE3EEFDB
+:10642000C0D7748F0F8CB72FD5305E2FC51107FAE8
+:106430002E75FFD7B48E5CE9773D1F49FC7C84C480
+:10644000F32BBAE6266EA6FD78681FBA8FDA2347CB
+:10645000B6D7DED2D68106EDBEB79F65F07283A6B1
+:106460005724C6F5FF6BD105BF47B961DE38DA5F47
+:10647000AAD3E209933A7AE5F9767E2F5C3ED413EB
+:106480004E78043C0FD7A5D13355601ECCFF486031
+:1064900033840228DD36CFDBD84FD2C24DBE97D130
+:1064A0005ED86571A2D9A3E3ABEE03D98AFA216164
+:1064B000CF31DA8FAA133A64A4F7978F7C4D71CB52
+:1064C0003A737532D56D171BB0FEB4BD7A23D699D9
+:1064D000EFEBA96F003F0CD6CEE1E313D463BB9082
+:1064E000E829583B57EF067ED865E6F52F1F394B54
+:1064F000FCB1CB5C3D9F8DE1F57A98EFAE586FAA69
+:1065000009549052FB65FDE19BB0AEB7FF92DA777C
+:10651000DB546E3F2ADE0CA47F5F5D85BA3DA42E5E
+:10652000F13AB3F2529F5FC581AF297FB8720FE78E
+:1065300047C41BCE13EFCDC375E98C7AD451EBA4BD
+:10654000B87336D7D701039FE9E753B798BC2C2A15
+:1065500044CF5E085BFF42CED9B1A88490FEB43828
+:10656000763A03BB342B186FCD642E2A87310F95F2
+:10657000D9DB96EE47B42DBBAFD5897A2B3ED7FA3F
+:106580008097E868F41F9ED0F4E2FAE8FC1BA301B0
+:106590009EF582778D887AF165B34AE72F3A24B267
+:1065A000373BB5358CAD3053BD5C3BF76D5EE95D77
+:1065B0003312F5EE2293AB19D7B30C4FBE19BE2F91
+:1065C000DB9DE1AA65C1BCE7B2D896C4B14A30EF01
+:1065D00059AF3FAAF1D946B5C986F7D2E8FB439532
+:1065E0006DEBD2717FFBB37D1F903CBD1F95417C4D
+:1065F0005CD17A44F6DA69BF4CC6F3299FD9FAD642
+:106600003F5AF7BE6C19740BEAF52FEB4D74B8794D
+:10661000203DF406E83F3738C8876AAC54FEC25DB7
+:106620007D2D9ADE055129D36C60B4BF90E9569157
+:106630008FE6ADB9A6C10A7CF482AC8E443E9B17AE
+:10664000954B7C5B162B72BE64B907DD92B6CF0DFD
+:10665000F5D43565D3BE533CBEC8686F546D5288BF
+:106660000FC00EC8473EA8DC60F2E17EA2C9DA4E38
+:10667000E77DE74531CD8F369E4F5CAFE93BDF6C60
+:106680001EDFBDDC39C592F351741E51AFBF1FE54B
+:1066900024BE28917CB4FF5572DE41E718BFFB3859
+:1066A00056C379C8FEE32804873E4E79701CD25742
+:1066B000E51FEC273FF88D6B757BD64D71ACE53B44
+:1066C000B4FC059B7B30F6F3B4A62718FAB18077AB
+:1066D00029A3AFEE9340CF1CECD333F90D53D390E5
+:1066E000BEC1F76C92410FB925A0D3C128ADEEFB16
+:1066F0007EE4F65161ED33F5FACC86A993FBC3F342
+:10670000B42D58B7427BE91B4B5F1DE1A373F5A184
+:10671000FDC5E9E3DF4BFDE9FC971AB5F0A00FF8E2
+:10672000EF60AC271FF37C7A673327CAE166498D97
+:106730007285D021358AAF3725E7AF35E03F88F73E
+:106740005C03FD4FD5380DFB8A8B8B96D17998541D
+:106750009D5ECCC7CF776DCA32EC27FE7F38AE1670
+:106760000EF700704CFD07C331C2305E108E1C0363
+:106770007C570B87183B6B7A06DA6B8F98280F28AB
+:10678000D1E4B366A25DF66F268AA70C673C0F883A
+:1067900029E30DFBB4997B2CF331FE9E29B1C3D2C2
+:1067A000589427B7B316D7A99F48645FC173AB3914
+:1067B0000E876E72E3FD4F2095D45F66B9B7821FD6
+:1067C000F2E6FB82FA3ED37095E5E3BDA09BA3E71A
+:1067D000DF188DFB66731EAAC23C98E795F12F3532
+:1067E0003083BC921DD2202C253BE3ABA8871B70C5
+:1067F000BF767014B75B04F670C3E1E448EFB9BC30
+:106800009E5BF3F0348C1B34AF745E8BFE53B3CDC0
+:10681000DFB21FF3761E53E8DED6AC47FD8D9950EC
+:1068200017D79968BD1463FDDB9A71DFFDC96C173A
+:10683000DA11CD68BF60FB4714F26B56D538D3F040
+:106840007E923A6D1DD8B276B28A79C1F58A1487E4
+:10685000EBDD2A73F55C3C7731EED18D0DD6EB5133
+:106860008FB91A07A9BC9E948CEB9A33D33A467B16
+:106870000FC868AE75A6A8B1C1FAF06FC0FA203D86
+:10688000B3B1C19D86FD2E2BD5FA3B88718A17E2E4
+:1068900034BC68EF33FBF4D2C606CCCB126B83F565
+:1068A000A930DFADCF723D3518FA47FB0BE6E3C3E5
+:1068B0007B057B874B744ECA06633B607EB691991D
+:1068C000B4DFD70C7A11EF2BEE1DC9DFEBFB34F2EE
+:1068D0007013EDD3607B5C6F6CC9BCBD3C83DF572C
+:1068E00020DB158A37C07A3015F39E14A6FF71F3AA
+:1068F000B8A4B68F1185F70184F0A375ED323AF78D
+:10690000691D66DC9F97D38C75897916A0BF27AA6D
+:10691000C6E737466BF94183580ADA6DC34D3E131B
+:10692000B61BC9FC545EC702648F8D621D541F8D57
+:106930005E63161E5B72D241AB71CC2DF238AA4752
+:10694000443B3171AE1E47F24E41BE74476B7661D7
+:106950000AEF3F7EC62CCAF7F569EFCD33863D318D
+:106960000DE6B57EC6DDCE50FB4E5F2F75FBAD4804
+:1069700083F9CB6821A2BDA0DB7545365E4F98E553
+:106980007E7A14C611DBCD26BC9FAD588B63166F83
+:10699000C84F44BBAC68DF5CB287D74473BB6CD1D3
+:1069A000FA19B277149EF79A4F767FFEBA0931181A
+:1069B000A76FB0B962AE47FEFD23BFDFF54AEDB168
+:1069C000E6C46B0A501E9BC1AFC6FB8F0E9ADDCA90
+:1069D00018E48B75C3C8CE6C8EF2D6C742BFCDFF0C
+:1069E000EA74D541FD6736F7F823384E43147F8F9C
+:1069F000F726216FF6EDF73F2F5C8C1E78FCF0FD3B
+:106A0000FE83B191EFF1BD43C35FD0FEF090DDD9BD
+:106A100060F6C4DC87F0BDCBE779D6EA89512F1147
+:106A200067FBB486E70376D6B85840E6F7D162BD77
+:106A3000A4683FDDAF5CD22250DC7C096B223D3A7A
+:106A40004C89D5EEA731E6C59616BD4DED4B5B7969
+:106A5000FB32D642ED757AE1BDB501831D3ACEF029
+:106A6000FD1DD1DC6FDDAC781F43FBFF9119D9C44C
+:106A70004FC06711F32DE207D877B9319AAF1F37AE
+:106A800062DBC8F628F163B87DB85CE0E7B307C203
+:106A900053D57993613D0ADE9F21D37AD4ADF9496C
+:106AA00087937CEB6F84F97F9FF54A24A7DABD2397
+:106AB00075825F42F9FABE33ECDE1B2D0F68BAA671
+:106AC00025FE43CBEFF93E6B79C30DFDDCCE02F41E
+:106AD000DD61ED9E1214A4487919D0AF411FDC3A54
+:106AE000C258BFDD65ACDF3929F23D7D6B6BD4B494
+:106AF000D07BAAD60E708EF32D8D5E577FDF120BE2
+:106B0000CFEB7B0BE95E81F994B47FC1F3FA141BE0
+:106B1000F3A01ED9BFCF46FB21558ABC1943165599
+:106B2000E0EFE2BDF08A9D9F3740FF17E3058A99A9
+:106B3000B70FDE97C4F751123C495A3CC3953463F2
+:106B4000D4B7871BFD2ACA0B96D846DC770DE627FB
+:106B50001AEFEDE88AFE380FFD6398CF6C8C4FE892
+:106B6000715A7D3EFF287F2C5ABBCF399C6E6B3407
+:106B7000F9A80BA3733DD23907DF73B9F952BB876C
+:106B8000FF29C143796889261E17ACB3B98E529C80
+:106B900044F30FEAB4B806F37D5DEF56C2EC9510EE
+:106BA000FF227DEDD7F5F539E477F338882D6A15A6
+:106BB000AEC30D36BD6EA6FAD3E6A600F9FDAF5AF8
+:106BC0009C181F83EFDD1867F3CD1D417E5D5D06C8
+:106BD0004BC17B0EDEB0CBB4FED6BD6A69C6F5D81C
+:106BE0006DF376DB42F249BAECEFD1F9A608FDF974
+:106BF0000CFD0DF976FDC1F8AD8877FDFD1BF6A7FC
+:106C00000222FFCE49F91B69ED1F7BA19EB8CB4242
+:106C1000714FFDF70FCACFE7D1FD8C7A7F13144E69
+:106C200087CE1AD5908F5D8E7A3707E5A09DF467E1
+:106C300045CB2083DED4F569C5F91B68BF2C4857C6
+:106C40002D2E21B5935EAA38FFBF68BC3B909E34C1
+:106C50004E12E9F781C74935E8E3E038930C70F745
+:106C60001F6732C1A18FC3DAA20CE79FEBCC3CAE09
+:106C7000726698332636821ED14B7183C970FF60CD
+:106C80009DE4B262FF75CA4E35347F287C5F00EF09
+:106C9000C56421F0D5C17A86C1720BF3525E403DC6
+:106CA000F6132207A2D9A562BF62C2F8E9F92EC67F
+:106CB000FE45B9BD107D7233F22DD88B3F583B7E17
+:106CC000950FEC49C9EC6947BA4A769313F3686BA0
+:106CD0001513C545EB92AC64FFAD12CA559473BD54
+:106CE0005FA9432238F47D8F81E6299F77D03CC38A
+:106CF000EF3BFB9F1B4FA176FDEE573B30D7930F29
+:106D0000FD5B54930B455D4E53D82721F40FEF479D
+:106D1000DA2045EC27BC9D8EFF01E96CEE70203D2A
+:106D2000BAE3A58879101B95EF9807312F4C1F27E0
+:106D30001CCD0EE0F74287232383F4E54605F5A535
+:106D4000FDCC9FDC4ED2CBB4EFADAF7FE684A9562D
+:106D50009E4F6CBC576F20FED3F1627DF341C6F3AA
+:106D600053BD947F72393C4882CB43FB007629E2C5
+:106D7000BE36584286FC384931E64F35481EE2633C
+:106D8000F34DD556DA27495B69C57D92D592330616
+:106D9000FDD8DE37C1FE83F9353A79BE6A78FF6BDC
+:106DA000F01E66B4731553C4FB79A306B0AFBA34B2
+:106DB000FAACD97769FE01F5E1C175372A4E5271F7
+:106DC000DD359B39BC03AD4B7ABF03E1EBD17DFCD4
+:106DD000F71B2C39563FAEFFE1E3354A1E4F3EBC50
+:106DE0006F047870DFAC31CD4DF86D542515FDD5AD
+:106DF000E81151CC1AEA6F65CCA2F767E2E3F1CC57
+:106E0000226B8C8F9C97A3E369B7F21DED1D6F1861
+:106E10005F0E7F8FE2E8217CD9A94CE8CF97BB9128
+:106E2000171338FCA1F7A65A338645BC7FB21F7FE3
+:106E300086F14DDE6446E7F70643B919FA6ED5EEE2
+:106E400043AAC0B50BFCF4F27B14A6C2FAE677E4C1
+:106E50005F4039C96BDFCFCFD1B426F07B1EB5EFD1
+:106E6000C3C75D62E7FEC812BB4A65CC51F72FF17C
+:106E7000F7375ADBA39C785EB1352EB21F9363D7E8
+:106E8000F3689AB473081DB44FA1B7CF9BC7DCCD8C
+:106E90000AC53D1BADE07F25F4B5FFA9B63F0282D0
+:106EA0000BE3DCF9DBEB9AF9F9513E7F8CAB62FB2B
+:106EB000C4C48E5C41FC0E74DBC60CF7DB55583B3A
+:106EC000B251CEE79ABC997618A7EA684722D65BFA
+:106ED000DF3E9D4E7E6F1DB7377B774753DCA03F6B
+:106EE0007D6AF979F2F329CC37A83FDDCAA500AD58
+:106EF000ABE5E7D3996F1CCDDB678D0BBEBFD3C26B
+:106F0000D8A4B1C8001C4F889F48F430DB4D067AE6
+:106F1000803C5E67D7E88178EAA3B776EF4BA77627
+:106F2000BFE071CD5F612AF7D7F5FBA58E67F7E566
+:106F30005BD07D5BE536F713784F0B3B2252BEE604
+:106F4000C229FCFEC48516770CDA570BFF53146A6E
+:106F5000697F93F3FD220D7F9DCC45F70EF8D6DABD
+:106F6000F8BE4E987F96F154FEB83FC2F78BDA44D4
+:106F7000CA1B5F3045F161BF79ED05BFC4FDF9E281
+:106F8000C6683A77BEF07BAE9368D72D7CC2E6C464
+:106F9000DF7B59FE41667E32F4BBFCC90CD507DFAE
+:106FA00045AFF024595DA0271FDB53887E45833011
+:106FB0007FBE3006FCCAC70EACC2B898F4CD94CFE1
+:106FC0006D507FF4B1775661BCE9B718E7263BF600
+:106FD000DD42B4635F42D0F4FD3FC0C14B874D5AE0
+:106FE000FDC4AAA9A0F2AF4D6835292AFA65275633
+:106FF000E139D9C438F718138CF78EFDB342EC6F22
+:10700000C113A3CE6D80F7E7ED17C8BE003A69DF64
+:107010000B374F01BBBB78B25E972D588F8F6686BA
+:1070200038BE3933383EDAD9AD7A7C8B45DD8C7188
+:10703000F7E305D55324E83FC3A1AECE19C9D8C4A0
+:10704000F5F9AA1BC6CF76C4DD8CF198D6BE7D8338
+:10705000F8D5181F6B65DE0366787FD3E3436EB601
+:107060000262E30779C6A830FF41D629ABA7DFF457
+:107070001DE46344BFF3590DF60492934388D2F4A0
+:1070800015FCDEC23EF94EE37CDB571FD1C1CFC3F6
+:10709000E8F5245E6F5D19595FDC12C3F9BA352A31
+:1070A000F2FB664D3F00BE03147F6D8BF60FCF08D9
+:1070B000EA0F901FEB2492A7755C7F801CCDB493E0
+:1070C000DC46ECEFDBCA6BAB76AF79ABE48EC6F88F
+:1070D00082AEC7308286E3CCB53B0DFA39AF7D0175
+:1070E000E9D751312A87C7C9F19330C5A84798B568
+:1070F0003D3B74DFFE77DA3C33AED3E33F013974B6
+:10710000DF69F98EFC4B9E9F2DC7387F88BD1D9C83
+:10711000C7548A67F4EB17FA736AFDBB72AE045F5B
+:10712000EA65F0154FF8BADC3C83FD19E32FFDFB4F
+:1071300093B57DC126E33A224786F3A4CE27807F0C
+:107140005388FE2CD6F4A99E07D1BD6B24E54F06CB
+:10715000C7E5E73181BEBFC4DF5DF2813E453D96A4
+:1071600027B96FC5F679ED712ADAEFC06FF51ABF4E
+:1071700049C86F3A9D5BE3AAF369BEEB04B24BFAD0
+:10718000D941DA3A9AD724D0EF990D9EE715E787CF
+:10719000C0A7EB7BE8BF55EB7F3CE7E767FBF8F95F
+:1071A0003E941FCD9F67AE0EBA5F3D1CFE852873CF
+:1071B0000921EBD5AB368AEBEB78BB5AFED7ED85D0
+:1071C000F201D725077D37F868C0E184768B511E20
+:1071D000505FB57C42F764B6B6890C7FB200E78D8C
+:1071E0007A234FD793BE95870A24B25B827AD94916
+:1071F000F68BAE3703566BB0FDB9B52B0BEB51AF29
+:107200006AF7ECC78BA0C5C706E1487370BB7792DD
+:107210009745FCDDB81CBB5DD723348F8D2B0AE866
+:107220005E852A6D3D9DD4E1A3785334E27142100E
+:107230001FFA7A7DA7A5E315EDBC97811FF53AD813
+:107240002595A6AC60FFF87E6608DFE739381F8415
+:10725000D3E7BBEA27C0830FF1F0430DEF0950C716
+:107260007B2D9804EB17E6FDCC505C6B3242E05668
+:10727000B83E4E104D5C8F5D462EE20731EDF7585B
+:10728000EC24CF417C70BBE5018716E7D5EE293FA2
+:10729000680239A17D363ECFEE5DC9D4EF6CADDD1D
+:1072A000DF4B2F6FD6F296747BB1E2B5D4CD46F8A2
+:1072B000797FBB1C1C2F7947DD63D08E19EE515CA2
+:1072C000E81FE4B5CFDC8FF924D97BF00704827C7A
+:1072D0009EDDC2E514B84BC3CB9BDB43FBAD74D83A
+:1072E0007539FBBBCC23FB28E757A4CB7D21725A11
+:1072F000E35038BE607E16C4A764D4A37AF9F7833E
+:10730000C3B31FCF2595033E506DEB786B6D99BFCE
+:10731000D286727C94B9508EBB5BE69B46215D3170
+:1073200011CC19A21FD6F379E87628F0650BF2E5A7
+:107330003AC7101A6FF85177740EBC1F8E7613C6B9
+:107340007D5BEC7EF423FC0EEF2E07E27356EF1408
+:10735000DC4FAD8CAEAEB5853CEF6BDF06ED898FB3
+:10736000BD22EE1F953FC0F8BDF1DA7CA0A9CF0287
+:10737000E355C820A759540F20DE5A65DEBEF73EFC
+:10738000FAA5115629F27BF960FDBE95F8F36D530D
+:107390001CD217FD24B493CB454F1AEE7BB2C11615
+:1073A00017AE03E07710BF1FB431C906FDFF1E4AB8
+:1073B000D4D3D3C4A5748E6B5A9640FB44BA7F8F46
+:1073C0007A0BFDA43BBF174DFCC82E3C380CE3D311
+:1073D00009D19C4ED08F55EBC76A1D1B94BFFF4847
+:1073E0001F49FE8EBEBE1D1404EAE7E04DD735D717
+:1073F00085F841D81FEAFF83C28CB4A5C8FF9A1F45
+:1074000047F6617C70DD457B65AC21CEE6D3E0EBD1
+:1074100048473E0AB547D13EEDB3677DF357DF0CD1
+:107420007A76E2F496005E715FCB8A6EFE17E86FA3
+:107430001AD8B336C0C33E8D2F0E66F844DC4F3DDC
+:10744000385CA0FBDC0F457973AA95E038895A5C5B
+:107450002051CB334F8CE2E50F62B81EFC3C86AF67
+:10746000D737A8BC9EE8881C4798ADBDFFA989EB1B
+:10747000F735F991F3D14F68FAF5AAEDDE1C21FC3E
+:10748000BEEE138E09DA7DDD946FC7E3FD0B34FE8B
+:10749000063B87E814B4ABF87E9D6E879E6D9F4DCA
+:1074A000F51382F7BD7B042C3D4F909FF4AE48F15D
+:1074B000A1E2586F22E6A55544458ECB0CD2F0F4DC
+:1074C000590DA338EF29DCCFCBE6BFB785F5251BD7
+:1074D0009EA47B1D4A999FE2BD451B1A68BFAEC89A
+:1074E0002F30A780FE9987C781353A946E110D71B0
+:1074F000E7C552B51C9B13E45BFC1DAED0F7259B82
+:10750000C619EA576F971618F23B827AA790ECBF1C
+:10751000F07E753E0FB74F8FD7380DF1EE051B8605
+:1075200017F2CD78DE7E2173D17C17366619EF1104
+:107530006E4CB8B27B82C11EF545845326FDA83F30
+:107540003F0EF8F785C4F7177C3A8CE0F88BC37BC5
+:107550005D8C018E68E633C4CF26F3DF29B4F1F8E1
+:1075600023F08FEF5276407ECC77F507AE1DC01F1B
+:10757000C8FD87FA037993B9FE654D02E5E04C9C9E
+:107580006AB4CF66C7F0756E764CB4C13E2B9A676D
+:107590006C37576B37576B77B9384AA85D2664A1AB
+:1075A0003EE3FDE9BF1F9571FA6DCAFFDC10C3ED24
+:1075B000D79FAA6E6F0CF4BB563B77D06FDEDAEF25
+:1075C0004AAD35F7E585525EE0E66F1EACC3DF09D4
+:1075D000E9DD01F63FE8C1FC67DFA07BBAF4EF6E9E
+:1075E0005FD132B408F054A9C973B98BCFAFDC15A1
+:1075F0009087413F29E51CAEB4967D8214F25D5A16
+:10760000096FB722C66CF02F7FA2D5FF35C649653A
+:107610005A49401806ED52366D1124EC0F7F570B76
+:10762000E049A966FED0DF934A19CFED9ADBC76F18
+:107630001616E604F1D0689A91A3625C3531DA85BA
+:10764000EBCC47AAB70EF150FE5180CE494CFCA8B6
+:107650005D42BBBD5B75D7237FEB78708A6A0AAE4B
+:10766000A3D11F71389BFAFC62BEBE30F6A86647F4
+:1076700037EB76E961C6ED425AA712578E30FC3ED1
+:1076800061629CB64E2432EF4E85DA3732A227A3D0
+:10769000F924AECC6EE6762CA7F7B42CCF167C3E40
+:1076A0006DF0C8B178DF47D6DA8084BF3BFEDA26BA
+:1076B00053C4FB519A35FCC33C9EC5F9E9F3B89C11
+:1076C0005ED0DB9907884FE8F2103D3DB2DFC1D8AC
+:1076D000E3F43EFFD9F87BE9FECA7A997E4F4EC7A4
+:1076E0007FB7EA6941BCA6B46C160837DA787ADC51
+:1076F0000E9FA35C1E978DE73A0794FB153B8716F8
+:1077000085CA7DBD4CF4D91C96E7AFDBF77F88E1D5
+:10771000EBEA9058CF3EC44B65DB3A8AEF2CD9C2D6
+:107720007FF76740FC5C21FE8412EE0794CFE1FBFB
+:107730005EF9CF4A44FFB27AFEFBACE5DB77F0B8E6
+:10774000CE8F990BF54379CB0EA128077F0773875E
+:10775000B028049FA9E57ECA83BFC6AECB1FD75B06
+:10776000E1FC8E7162B4530ED9B87EE8CC577CB878
+:107770001FDC69F69663BBCEE46817E677E9F8FF8D
+:10778000FD8E9BE9DCB57DA7258065A3A939C98A53
+:10779000FB0ED7CA2EE4AB6ED57B12E91327795ABC
+:1077A000F1FBD878BBAB16BE755AD85855B9723CA8
+:1077B0004C0CE38F893FE67293A43AF4BC86B12463
+:1077C00037AA9DEB2D13D76787CC7C1E3B1987F713
+:1077D0000731EEB3248787E368DC94F2009D1FCA6B
+:1077E00038BDD370CE30C85FEEBF7D1B7EFF3F2C0F
+:1077F000A14B2800800000001F8B08000000000043
+:1078000000FFD57D7B7C54C5F5F8DCBDFB0AD90DA6
+:107810009BF73BDC100C28246C9E0401D924848740
+:10782000206E0228C86B7947926C02D2FED0FA6DA6
+:10783000168331E56B6BD41645A92E8896B65A830C
+:10784000A2060DB82822D64723A58A2DDAA5202224
+:1078500084641BFBC056CB6FCE9999ECDE9B0D0F59
+:107860006BFBF97CE18FC9DC799F73E69C33E79C65
+:10787000991D33B5CDA88C22A4A69A38BC342DFD11
+:10788000E90EE98485900BF06F2221836C3221F19F
+:1078900084A43CBD4D522C58BE7F5A1CD6272605C9
+:1078A000BE4BD8AE8696AFA0A95B22848C25E4A0FF
+:1078B0008178CC3184B4E82A47D968FD9684487B26
+:1078C000132D3B667345DB687F96639D07ACB4EA76
+:1078D00098633EA38BF64BDAE9C76442DE3012129E
+:1078E00041DB1D8C60EDD36D74902242261B89070D
+:1078F000BF1B3D2314DADFC1A183B0BF97B7EAA64F
+:107900007A697BC320B2D81932EF749B0EDBA56C69
+:10791000DD21E9E8F7B8485A1E323F51EF015B59C3
+:1079200026CC67CCD44E8443DD563DAEA7C2E81CBE
+:10793000B66654B0DE68E88FD67BEDE64F8C7EFAF3
+:10794000FDC72FBD6F2450BF5572B4C1FC5BDF373C
+:10795000CEC9A1A9E7E7324920643A61FF36BFF0FA
+:10796000BE51A1DFA7EFA670A2F5EA76EFD22FA352
+:107970006957A9C5238D2624F3CC6B8B4821FDDEE6
+:10798000662211746EDD3657918DCEFBCD5D530EA0
+:10799000495184589F33F92015F021C49FE1B40662
+:1079A000E725523A30CE2F722AFDB310B246EF557A
+:1079B00099F0DD955945EBB7C630F8CC1FCCE042C5
+:1079C0002CEC7B155F97800B1D7F0A8C5F91E5DCAB
+:1079D00001FD542446D89B32619EF9AF9929DCEB16
+:1079E000EC923D82568D2B67F00C9D57654EB87911
+:1079F0006DC0F1E263D9F844EFCF807109F1B2EFC5
+:107A0000326921F9C1F67338BEE9771FFB4E863A19
+:107A10007382F3D7E26F834DC2FA61E86C11ACA3B5
+:107A2000F698CFC7E8AC530F749679E630E243D0AE
+:107A3000CDCFB6EA3115FDD5D98CD85F9D4D8F706D
+:107A4000D90C781A4C53032C9AA61BCC5E0F85C711
+:107A50009BF3261F9272297E6E31FA207D43B7B4C4
+:107A600016CADF4861E3B7E8746B21DF729785348B
+:107A7000215E1D6E98CF6B3747217E6AE71ABD26BF
+:107A8000DACF8F9F9758DE63F112FA67AD6BF6720B
+:107A90006847E222EC4F02FE5C078C73ACFDE94ABA
+:107AA000796EBF51A1DFA7B7B1FD27F050DBC6E863
+:107AB0004BEC0701D7203CBDAAFD24F0317FB08DEF
+:107AC000D105A5178077CDCE08DB49331BEB02012A
+:107AD000FA8C56E5EBDB936D274704F335F007D0BE
+:107AE000C10E628179D6F279CED3B9EE83FD5567A6
+:107AF000F61F3450D4161F0DE07E1F887E6BD6FF14
+:107B00003AFB640121AB930E612AF6AD61A87A7F3E
+:107B10006FE5786F8294B67B82D34D4D611BEECBBF
+:107B20009A930DB89F2D53195FB31C238E503C13AD
+:107B3000F243BEDE7BB17D4564DB6499C2BDE27178
+:107B4000C9D644FACF4FA4AB24E26CA3FD7DB6F5B1
+:107B5000F5A82500DFAF2EC8A498AE3782AD7737E1
+:107B6000E73B5D3B29C091DE1B8C24CC7A2FB73FCD
+:107B7000E23B22013C6B38ECBB9E2E1FFB29A51774
+:107B8000CFCEC1F6ABE892CF3E3DEBF64FE9BCBBA2
+:107B9000764CB4CB40364D4EA49F407C847D3BA5B3
+:107BA0009F38994C9528DE37B4BD1E358EB6FBFC48
+:107BB00097A3F3816FBFCDF7FD99E7E5F50097BB7C
+:107BC0007EF6EC75505EE395624D30CECEC7FF95E4
+:107BD00042FBA9DE510F10264DBF7CD5E8A7F574F6
+:107BE000DE6DECFBCEC136A8F7F913F75F07F06E38
+:107BF0006A6BC2F2334F6CC3FC6B3F7B76DF3F682E
+:107C0000BD5A67941DEA9D797E3FE2A5D6A577C04F
+:107C10007A07A2EBCDBBF6337ED926E17E2373191A
+:107C20001F13742DE8F7F39F2D1E1B2A37C4F71678
+:107C300023973B83981C39CBF76F4D99A505D2B399
+:107C4000CF44CC85F5BA8DFEEC6898CF2846171F37
+:107C50007178D4B6AD31B82DD81EFBF980EE7B48D3
+:107C600073287D9EA2F44E6BEDB85000E3FD0AEB45
+:107C7000D37A251114BE372F382EC17C22473518F0
+:107C80006A709EBF64E574D5A1E5C5EB183D6AE94D
+:107C9000E00B9B05EB8B7D90B2BB324D413E60B259
+:107CA000333ECED69752ED6AB2D2EFD7AF73D965D5
+:107CB0008AC7974F1F9E9C4AF33F1B211520FE65E4
+:107CC00089C9398F05C7A95B5F464ED0F9EAA2D9A9
+:107CD0007E49B011FDB5C807B631BAD713BD05F25C
+:107CE000FA00F289BA162E0777B0791273206396DC
+:107CF00015DB59AE8D09CE83B6B358301FC8B829ED
+:107D000007E48E672ECA1DC588F33D23F801F1E410
+:107D10002ECC09EEB7041D7101FE138C34B5307EF4
+:107D20005349FB4F8F2E4D8A2E0AA6098358B91648
+:107D30004EB7F0F21F453B92A2015E3B6355F260E5
+:107D400020BEF2DACDDD4C6EBF721CE9D00D740896
+:107D5000E3BB4EAAE4F67264AE940EF71C473A5C9D
+:107D6000DECEF8ABBBBDD4B88CA69B253217E6EFB0
+:107D7000E6F4047464A7F99BA2A3717DEEEBFCD931
+:107D8000C0A7BA39DD75EF61F4F6864EE701F8BC9D
+:107D9000B17DE43690075AF928553B11DF6E8A6FA2
+:107DA00093047AD6BAC3A067D555133BEC57F76E48
+:107DB000BE1F1A08EE07777BE572E82F356E9A5DD5
+:107DC00096502F999C4AF3EE5A5204FB2D656BD9BD
+:107DD0001EA00BD22E91AB205FEDDC0DEDAF8FAB73
+:107DE000B3CB9920F7B6279969FDEB471463FBCD18
+:107DF000E94A29F4E7A920B627216F70A13CDB9C52
+:107E00003CD20EF2CEEDDA887A175106D9A19CB891
+:107E1000F46BA1BEDBB3806C92C2ECE33D9203CB6A
+:107E2000BD91DE08DA7E7A3BD37FDCED6C1F9F13B9
+:107E3000F011A9A173118CD7FD828978A4209DBD72
+:107E4000B9670A93B32F9A50CE9E6D749013543431
+:107E50008F8C5610AF028E35AD993AA05B42669971
+:107E6000601ECBF83C5A0D4C6E44733990752F9BB5
+:107E7000C772BE1F9647EB786AE4FBAF95C9059BB6
+:107E80002717E4E0393E1E924502977374E8BAE57D
+:107E90003EDC27B54FB3FEE24C8EBCDB42E855E832
+:107EA000475A7A6CE2E3A66C3D20013349D95AA5C2
+:107EB000DAE7D757135F3D5DE7F55B75BE89B9A873
+:107EC00037DD82FC7C83916C97FAF7774F34E35B64
+:107ED00015B1CE3C09E4D7CD16D43FFAF6E9208798
+:107EE0002E02F4B87CC9DE84AB7016EA68BDD309F3
+:107EF000563BE0ED471C8E5A7DABAFBD460F9CD183
+:107F0000EAC9254369E9864173019E545FB798A188
+:107F10009D8DB6A7F512B68F7B6213F2AB26ECF7F8
+:107F2000F6681BEB27D659D8002C2ECBB98EC92763
+:107F3000AB3DDC7AD2A3859EBD284F07F433DB82AC
+:107F4000FBE1C7AF484B19BD514128013DB2FD418E
+:107F5000E8FE7852417A443DCADDE0F486A747B690
+:107F60005FDC54AF023D9BD2E35AA6275B08DB4F90
+:107F70008C2E23A73279007C2B549F15FB54BBEF2A
+:107F800005FDF6EDFBCBDCEFDD06B61FBB291C8043
+:107F9000DEFBE8FC6546E79B36D0FD48CB37D1FDDC
+:107FA000D814C2FFB5E71F98279C0704BF3D66732E
+:107FB00076005F746F7FAB19C996F347F7CB3FC864
+:107FC000BE98DE6586CAB45F33DDAFA1F463A6E078
+:107FD000B6E663EA013911B95EAD4789F4836826D4
+:107FE000BFBEB1DE3842D2A3DEC3F155AB737D0014
+:107FF0007C1EF4464A1124633DD31B1340E600DE89
+:10800000B6477A413F4E4820AEE7C2CC673FDF67B4
+:10801000029FE2FC9010C5EAF7F27DFF29AFF74F0F
+:108020009E869C4B703F283AD771220F2C8F443B81
+:108030003A2F2C17F3E93BD798D97C13EECADEBE52
+:1080400029048FC17D75753EE037EB5E9F7EA925C3
+:10805000388E908B5ABA81F983FC81F5548E1AB808
+:108060005EEB7E7E3ED3D07104DF5F7BA8B882B426
+:10807000D5E0FB2BEEC7355602FA222507472C9D8B
+:1080800057FDBEE16C1F8D086443FBEA58D74D31A4
+:10809000B4DF3193F8FEA0DFABE09CA0271E530CA9
+:1080A000E0DDE0F587E0F9D318D67F8FD5EC91E9D4
+:1080B000FEB823D6150DED3D65C4EE03397307E513
+:1080C00027B06F89AF08F84D3DF147019CC7585D57
+:1080D000F13140BF726736C9A2FC57F2E7C2F763BD
+:1080E0001151B984F6F371FB6F9F7985B65AF8CABE
+:1080F000B985DF03FA7A312203E8E218D5973B51BC
+:10810000DF560683BEDD4B94C1B630FC57A40BCCC2
+:108110003AB3BE20983F66559F2F447A4D0CC36FEB
+:10812000FDF914E28985FE099EBF7B6214F65D1F8E
+:108130003082EA567F3E8378687F1FEB48755B98F4
+:108140007137C5307ADB4DC8D470E5F7F171760F21
+:1081500065FB30B04DF2027FAC5EBFE1CF32E50788
+:10816000D5EBAC3E4C6931E86FD5368F4F47F3C73E
+:108170000C8C1FD17FB3CDC541B947EBE9C7030EC6
+:108180003CF4204BF9E0522EB79635BCF925D813B4
+:10819000AAF5C43C9EF6B3DCEC3C984A8B3EB32C6B
+:1081A0008F02B6BFF23BB725805C4A5CD0CAEC3286
+:1081B00064920DF45EC93143BE1079313D4B8FFAA4
+:1081C00031E29FE2EB8B18E74CC0F782C104F580E7
+:1081D00005B7457A3D217CD0CCE1A1A59B4FB87E67
+:1081E000A5ED7F766C1981FE3AA29C73813E16DC68
+:1081F000764EC5CFBA25FF538F025DADB1DA9F64CD
+:10820000DD653843E8FE3B62BCF33AC4534F5E671A
+:10821000F6FA4CA0DF40C68760CFEA30D93C0A941A
+:108220001B11CFA2DD9F1A29E3CB0EE6979E1E36C7
+:1082300019E86B19B13703DE97B544124F083F03B5
+:108240000518E8C37D9E603F4B3BDE3C0AFCDCAD7D
+:10825000F7239D2C355B108FEEF37A9C0769317400
+:10826000F9457B8AFB23518EDB607D9E7BC6479F51
+:108270001A493F26D2EFB87ED7EDF0FDA1C828E21B
+:1082800000FA784BF60EA7F3EF352B836328BCEA90
+:108290008D940E4663374E7388FE43D2AC6AFC77EA
+:1082A000BCF525CC67B9D9650439BEC241CFA73228
+:1082B000E0C957641B158AEFF1F28591978FEF455E
+:1082C0007CBF7F6CA4F41F661FDDC7E1DF23EAA536
+:1082D000B07DF27106A97E0ED26B684ADB7D3C94BC
+:1082E000E7F3793E9BD74B60F91D7C9F7C9CCBEAE2
+:1082F00069C7F1C530FE363BD6B115E045DBF98CD8
+:108300004017FB22BCA8B716527E07FC6D6D3AEAF7
+:10831000AD94AFEDC07AD9C4178DF54C28574803FA
+:10832000E57BB0CF8B1484CFA6524A27B43CB0D79C
+:1083300064DBAE04F12AF0A9C5637B8CF4EFC9C3FA
+:1083400051923ED48E42E5617B0CB3A318617FD27B
+:108350009918999E360CF18574225F3EBE6E8C6032
+:1083600078A0FBF4B518D47B7D39A1FBE504C79751
+:10837000E0671F0F52E3B58AE3E16D5E6F518C8DAC
+:10838000C94F7B00F7DDC731AC7E5C169343420FCB
+:10839000FF0387CB4D9A54C8953153D5FAC54D1C70
+:1083A0009F37C54409BC7E08F315F288F2175F3485
+:1083B000DD0F0B5E35217F211B03D9B0FF68BD6344
+:1083C000586E0A2C8AA572E426AADF18F3B1DD22C2
+:1083D00068DFEF3C3F4AD08595809C3E25D65318F8
+:1083E000407E4FE51DAE6B29A17C43BA34FE37D0E9
+:1083F0003AC994D6870C56D8F94EA60302ED8F20C1
+:108400000AF447E1FEE750B86BC73BC6E9E09F318D
+:10841000921EF19647F2709FBDFF857521EDF29C8B
+:10842000CDECD151BEFFB8CE7501FAE9BAFD2DD41D
+:10843000CB8F197DD9AD9630E546DF630F49C1F288
+:10844000C53F973D46CA2F767776FDE466BAEEA51E
+:108450009DB21D865C7AE75FDF1D037A75A7C10EAA
+:10846000E7462ADFEFD5C3BC1B981E794CA7A6832D
+:10847000B3DF559F73D26219BEA8DE83FA9CE03B3E
+:10848000427EDF4A7C57815C5F461C4648FFB466EB
+:10849000D50C42E1B7C2B20EF9D1E76BA7A11EBC61
+:1084A0009278B07C598BE14FA1F26145AB3ABFEABB
+:1084B0006175FE56AF3ADF677F2E0F2FDFA7C732F9
+:1084C0003A3E4BD93EE03FB0C1E4053D485BAF9832
+:1084D000D7CBA43CB113F82495FB60475817E1486B
+:1084E00004BEBE6E6F69E2C5EC7CF5E7AF21DE101D
+:1084F0007D23A837E4126F6CFF7ECB63158423F4D1
+:10850000ABF071E0BC71B62CFC3A26C60A3D651092
+:10851000F627BE8B7E82E345E13CEACF9B07988F2E
+:1085200005DB9F5D197E9C1BFAC6B1A9E464B07D92
+:108530001C936BFC1C2DE8A3FE7C127E1779A1070F
+:1085400007DBA531FD8AA4D94E4506F994B0638BAB
+:10855000FD704222E664B43BDDCFCFEBF65CB05F4A
+:108560009F003D08F6E314659F9F4E71D9F7C666DC
+:10857000EB8706F78B761D94AECEF843F8EEB25833
+:108580006B1C8E6B27761857D0FBA2DB2B06BBE843
+:108590007CFF786779A26B54283FF530BF8951E89A
+:1085A0005F16959C251A39BCACFD2DD4BBA8BE9591
+:1085B0000D4CE7D3BDB723BDAF24CE04A0F39EBDC1
+:1085C000C3335CFF86FC15F399E559622098A79B9D
+:1085D00098EEBF2A3E9F591D4CEFD3991D061CC72C
+:1085E00041145B021EA5D97C29F3D4D3FC84BEF9C7
+:1085F00083918E90F17CFE12B4A7F09DC053B2D44B
+:108600009504F336C1B874BC08E24D82B469AC5D20
+:108610008174A2E4D4B379303C4F260D69505F6772
+:10862000F6CB6C9D740609D0BE0F5E98B7F2FCC6FF
+:10863000D9BD8B56C0778B15F98891CF63472CE550
+:108640008766E42F6658B7C9E2FB1CFD643CF594CD
+:1086500029B88F3D4309DA3B06913602E35A2CE7ED
+:108660003CB0581BB149908FB0F5FAE0FC70CE6673
+:10867000F1E846239FDC190B7C527A6725E085F2EE
+:108680006566FF19A85CEFC373B7E073317C7E4D5C
+:108690009CCF2513068758E2C0F11EB0AE9C414026
+:1086A0008459D649D07E4BD454F4EF2500E0697943
+:1086B000EC54BD8A6FC53BD5F9C4B9EA7CB24B9D79
+:1086C00037D3933FE88B92CF99742116CF5923C0AB
+:1086D000DE62E0FCA299CFEB08A4743DEF713EFD91
+:1086E0008DF513BBFABCEE8E3112B4E32598CDD0D4
+:1086F0003FD557DE8B65FACA271E289703C8CFF3EC
+:1087000026B6F9C0AED37C8364BF8B7E6FB62A1BBE
+:10871000F494543DD32466C7D1DB4AF5B47C5B8620
+:10872000CDBE89E6EBC17E1D0BF3B7D53C8DF64976
+:1087300013AB4702CDE08FDCB6C966837A71E58161
+:10874000C946D08B5710DB761286BEBFA2FB86CE01
+:10875000F709C853BC489C5E220F29F3710DBC7CFD
+:1087600007FC9DC5F2138BE15CCAFE6575E4753AA2
+:10877000C0EEE090512ED677E4BD6EA1E365CDCE7C
+:10878000433BBCB39CF97309DFF76334FB6A5C902D
+:10879000CEB13C8FE7877570BB6E9C89F96B6D74A9
+:1087A00088626636C0FA718CFEED44FC63FBF25AB7
+:1087B00012FC07FD9507FB473E3429581CDC677403
+:1087C000A87CB3BDA996D61BA3F7ED877D3C8EA7E9
+:1087D000793C7DA3F40694BF9D3A8B62D4B17D6D44
+:1087E000CE0213865306B814DB7ED004FD4C907C79
+:1087F00098664CBDBF09A65FC5ED47D14946EF0657
+:10880000BA8EA6128A67B477FCF920D8A5E5074985
+:1088100001E0E98841C839079ED3157A1CFB1A3A52
+:10882000986C40FDFC2F932AF03B01D58CCEBBD237
+:10883000C61621BE0F2C5F75283F6AE364E437B388
+:10884000A632BF6AFD5CB3579240CE10E677D2BB2A
+:10885000326F0AB197083FC4FB0632775798F3444A
+:108860006D1CD34FAB66303B6FFD46A3CA7F531DD3
+:10887000C7EC5E33E3268F8C4379C4FCA779715C27
+:108880006F1B4146009F0AE1234550AFABF4ED81D9
+:10889000F88CBA9CF399398E0203EAFD9CDF08BE7E
+:1088A000EE1CC4F6F33C42D281AE679306E4FF8728
+:1088B0004B6F457E7313F118006F1F95B17802312D
+:1088C000EF5953D57AD21CA73A7FF35CAD1EC5F0A1
+:1088D00021C69DE7529757093D78AA5A0F5EF0FFCF
+:1088E000BE8A46B99AF854DD8521E0E760F600C0FB
+:1088F0000BF373E8916EDC1B993FBCBE3DEF8D38E6
+:10890000D8677712BECF7649CBD1FFB24B5A1182CE
+:10891000FFD45AAF047264B855D87D98DEE4347938
+:10892000F783DFC359831291BCCEE3490E403C4923
+:108930007E90BEAD65561657411CB5309F345BA482
+:108940001DF4FE165D3EDA655BA2AC2A3BFAA60D6D
+:108950004A05D413F658C544F26D9C6EC29D77D774
+:10896000C531FEBA59627671CF3C339E2BE3B39C7E
+:108970002A3F41BC4C8E829D70649C22EAA3FD6319
+:10898000B3C1955C4053AF44971117D25E261BD1FB
+:10899000AEA8E14FF1B176B4EBC70FCE413BFD9CE1
+:1089A0008E3CB42F124B84FD2A29D8FF9CD9DBF4CE
+:1089B00010A753DFB14DBFDC12A4BB7BE2B85C8DC6
+:1089C000249140AF7D76BAE74C68A77B5CE7FC5FFB
+:1089D000A0CB5AA30FED7121F48ADF07928BAB383D
+:1089E000BD18CA9CF356D0F9F5BC6BB4C3F9191D78
+:1089F0006DB4FFE7F744A39D515F45503E6D2C6574
+:108A00007CA407EC5F741D9F4557E3F960A3D48AEB
+:108A1000F2A33B6632D2F16ACB013C07576FA574D3
+:108A200018229F56EF50E76B48279EDF6B9FEE475B
+:108A3000CFC817051F76EF56B723C3D47C378FCB2B
+:108A40008B7CA77D56054C7DAE3D8B9DC3E9418651
+:108A5000AEA3E81D23B7EF2EB09D8A0056FB947499
+:108A600031FDADC77A5A66FB9FC983223E8E566E92
+:108A70001571BDED3ACABFE0FC2AF4B022C2F2077C
+:108A8000741D72922E38DF42DE4EE87F424E087C23
+:108A90009596105242F743A7E04F43C950C037EDB7
+:108AA0001FF78904914331D8BF07CE7DE3F878944E
+:108AB0001E3C20B73D3AB317E8AB596A4039690606
+:108AC0003D9FA69B2417CA8397AA3D32C07B2C6981
+:108AD000983583D61B6FEE8C0438513A39124A3FD1
+:108AE0004DC497B14B52D111967745BF1D968E84D8
+:108AF0003CF37DC4F498E974C5D04F05387E687A9C
+:108B00004062E7C829961FEBA1FDDBBA69482753ED
+:108B100089570FF3ABB0A9F13F25499D9FA6F4A358
+:108B20000F8CC37070784E1FA12E77087E47D4FC3F
+:108B30002E937C857A18F9C1C1EF805D21723D19B1
+:108B400001FA0DD544711F6AE9E0EBB86FDD6FF2F1
+:108B5000755C18BF490FB7135F4BFC2B9F96FAD378
+:108B600059F71BEBE5A4107A14FBE265038B7F90A9
+:108B70005E65FEA9123319E503FA2A647645B13F12
+:108B8000AE05FA8C09D25D31FF9E11CFE96C081950
+:108B9000027436A13DC22753BCE4F1FEAE05BACB48
+:108BA0000FEA23E25CD154D28FBE32A52CD45F7081
+:108BB000DF097DA4406A6BD267021FB9A709E61BD3
+:108BC000424F43E38B802F517AC27DDA4FCEAACB3E
+:108BD00035F426F02EF4E552D28074365BA760EAB5
+:108BE000AB5C85F2B5DC325B0FEDDFAC62F43609CD
+:108BF000E8310BEAABE9A5DCACCE6BE9918EA80BB2
+:108C00001D574B9F03D1DB10A037215F632F4D6FA2
+:108C1000D3E3BF757A9B1E7F117AD3D299E05FBBF5
+:108C2000226CE5A03FD7574B280F0ADE1DD604F96A
+:108C3000E17599A84FEF8AB6A37E5DDFC0CA0B3BF2
+:108C40001D32C4BD64ADE3E599CE72C8D7AFA7E5C8
+:108C5000B4EBA2232C2E66D89DAC3CEFAE86D7ADEC
+:108C6000A0677858FB973F6F96A368B9B799B72F5D
+:108C70006D2D877C7D0B6BFF19F8A946437C9AB755
+:108C800009BE5F7D6FA69D1DAB99FE3E91AF7797A4
+:108C9000F4DCEBD8AE95B55B75D03C88E0F99FE984
+:108CA000E5D7F1754EDCCAD61977E2FAA90AA58B89
+:108CB00015010FEA6FA774B5C5C8DF06383F974A9C
+:108CC000AD69904EA1EC175287D9DE220F657ECC9C
+:108CD000ED74887BE299FD45F8FF20CEA032449FD9
+:108CE000B8279ED96345BD84188A01A08747ACA8E0
+:108CF0005F0BFFA4EF212281BC8735723D24ACBFFE
+:108D0000724A5603EA115386083FA55FBF948E9BB3
+:108D100077E18BC9E1EC433FE2E39EE671137D7A94
+:108D2000B237530774B10B88240580F4DEAF417F5E
+:108D3000DB057E4826A43CA404F0CAF25BE37FBDB9
+:108D4000A9653C85AFAE41EF01A1962161DCC9CC9C
+:108D50004EE21B1CD57FFE53F4C467C4382636FF91
+:108D6000954D541E23D1317E3687E38F8CBF0AE99F
+:108D70007736C7D3CF057F2A2005C09FE670BCDDBC
+:108D800064A67A34F2C35683866F3C130F726ACBA3
+:108D900080FABBBA5CC357AAF9B82BB9DE7E2B099F
+:108DA000A07E724AF2627A7A0BD3DB6B2C4750BFFB
+:108DB000E97984E9EDB5C48FFA8FD6BE59B3539DD6
+:108DC000AF6B53E7EBDBD5F99E1C0F8ED3B3A5AE8B
+:108DD00018EC8AD50FBF8B76EC6AC15FBC6AFE4285
+:108DE0001571C65F1EBA06ED51DF986F3C4D4F6F8F
+:108DF000C5AAB8D0DF029CFAEC352FB2F81437615F
+:108E000076821EEB88F9704E251A79A4E527799CA5
+:108E10009F08FB86E02F7984C9237A8E7DD7418213
+:108E20007C5CABD7F5C473BD979FD384FE9307FAE0
+:108E30000FD0D3350D48644139647FDB2487C89F48
+:108E4000798566C073BE99EE6780976CC971595475
+:108E5000F4F005CA9981CF7BEA720DBD88F3D62D57
+:108E60009C5E668127858EFF7BC981E7BAC3B732D6
+:108E70007A99635987F4FAD16A462FE2DC77E5E7FD
+:108E80003C87FC4DCE797D741241F55E9A1E4917E0
+:108E9000E77CE68FAF97181DD4557DF818E8CF8290
+:108EA0002F1C6E24F1FA103ED134CD64063B4A9358
+:108EB000819D83AAA67F5CBC3484CF38224A1313D9
+:108EC0004059EE8847FB6C5DA47A9C66A9F3BB7F92
+:108ED00080F3D24F23D14ED4FB304195A477EB7071
+:108EE0008CDB3E6B607E52319F550777EEF3C37E7D
+:108EF0005CFFEB083D959F3592F7C55A5AB6C4E41E
+:108F0000CA86716A743E23B36376A25F578C3BB006
+:108F10005DD683F2D5F81A93C3016910C6E1D2EF8A
+:108F2000D9A1FEB5D1898C4FDF11EB2A48880FCA31
+:108F30004B613FA45296A4C604FD26C1F8066637CD
+:108F4000F90B715C32BE6163887D9EB60F1B8F5634
+:108F500096C0F8F5F729CE61DE07A31DE5309FD353
+:108F6000DC8F7B9AFBFD4E47313FE0CCBEFA2C757F
+:108F7000F1F434F7139E8E51FB8744BDA509CC8EC6
+:108F800072B2D16CDEA807BF3A316F1C4649EC21A2
+:108F90005303C6932C6078EAD913BD6D5388FFA59F
+:108FA0002EA1F4FB309F7FD89C3743BABCF5B83173
+:108FB000D40EDF23B1F3770FA7979E08968A71EB43
+:108FC000122ABF0F78EC99E7473CF6E5C78ABC1335
+:108FD000FBEF99C0F86B5FFE3B2C4FB8DD43D8F533
+:108FE00007F2F769FD7B54D0B0734004B3CF6BFD3B
+:108FF000F30B053FE3FEF9059C1F2DEC607E8245D7
+:1090000066D29C4ACB177724B2736E94275BE59F98
+:10901000F7445E513C86A0CB9EF4CE3E7FF62321E2
+:10902000FEEC3AEECFAC13EBDBAD5EDF0309DFBA4B
+:109030003FFB818430FE6C6DDCC38BA0470C0BE2E0
+:1090400061AD8DC1AD42AE2D077B6FEF728271E8CD
+:109050006BDF5AD604F6E0B53F000B2AF231D4A7F5
+:10906000EB389C075A57BC534714959D7D105142CD
+:10907000E69FEC8A51E551430F89034DAD4E51B542
+:109080004F6F18AAAA3F64FD35AAF24C4FBE2A9F23
+:10909000D572ADAAFE55AD65AAFCF087AF57D5CF06
+:1090A000234307A3FDEC900CB62172B5B74A553E99
+:1090B00072E72DAAF69F9186CDE369BDDD42FE7968
+:1090C0001C9DA38A8371CE396D4B55ED9BA4B6626E
+:1090D0001FF0469FE49368BD151C5FCB3B99FF6270
+:1090E00074FB6A55FF67A3D83D18AD5F96762EA333
+:1090F0001ED62E9147A4FE7EDAEA8EFB9B21EEA8B7
+:10910000BFBF96F24DDA6E353DBF80FEA6D56F8E9D
+:1091100026703F5D0A496174ADA50B0BEA7FBD5B0C
+:1091200065B427E691EC87C623BC0CC4ABF4C75FDB
+:109130002F6176AEDEA7AD7688FF59F5D632A4470B
+:1091400053929A2E2214355D448E50D385D5AEA607
+:1091500083C1256A3AD0C23DDAA1A60BE2A7FF433C
+:10916000E02DE02AE01E3B554D375A78E79300DAB0
+:10917000D9DD5EC9EE2361FCE2EDDB705D97D21FA5
+:10918000F5896AF8161C703459106E2CBE4CE861D3
+:1091900026AEFF68FD1342AF894BE47A15EF47F81E
+:1091A000179A250FEA517DFEC2125F862F13F4A78E
+:1091B00006C2EC44CEA4C4F07646FC3E909D51C05D
+:1091C00075F620262F6B8803EDE12B880BF9DDC99E
+:1091D000CA5BD13EB4CAF263F4BB9EAD627A52352B
+:1091E000F1229FBFE2B802AA879210FBAB168E5203
+:1091F00087E4B302BFE1F22085740879E0C27813F6
+:109200004A86E662951F47ADE782DF30847F09BD5D
+:10921000578C27E029F89A18CF441AE424D8171A53
+:109220003E474668FD486A3B8DB0F3E06021FE2270
+:10923000AD5D26440F6E91E938F290CC2642F1578D
+:109240006073A0DDAF8874CE87EF25E6B626BDC279
+:10925000ED1357933EFBC480F2EA12FEE8591EC993
+:10926000FF68667F3FB4F06BD3E59FF8036D3C5E0B
+:109270005210EF552F0F8F077AEA6FA7B41F7D8525
+:10928000F623EB02B1A1F6C3BEFB06921FD7731300
+:1092900071DC4D42F41037699B3C3F13ECC4544ED3
+:1092A0004641CAEC58A45DAB07EBD18EACA32B01B1
+:1092B000BAAF21217EDACC6039E6E5FE7911377448
+:1092C000297DE242A28DC73FB07827C2F9A0385F5E
+:1092D0000E749E13711470CF16FC21224EA8399182
+:1092E0009F8373492EF44FF7DBA644B41FD0FD29AA
+:1092F00085EEC7BEB8222CEFB71F35EB177114B23D
+:10930000B510ED42CB42D77B19F0107ACB6FA83E57
+:1093100080F7341215A6D70D3AF681038A0B3B5518
+:10932000719EF5467A80017BC18B3C8EAF4DADAF0F
+:109330003F9BC8E393F839E752F01A181F3CEE4EF2
+:10934000E0E332F530117727E0F8427FB8EF51C102
+:10935000B5EFBCD807F73DE1E02EE072AEA8F329E7
+:10936000C0976C3D9200F0EE8872EE83FAE947FDFB
+:10937000A7245D705E157217C6CBF6B6CB783FCFCB
+:109380003D81C55BB9F7C8C81ABA3B4CE837AD6E2A
+:109390007F1DF5C2AE46CA68A91E76A6910EA9BF6A
+:1093A00088BD4003EF81CE47623D1F68D62FE2752E
+:1093B000E83A7F7F0938FC3E1C1C2AE45183E19E79
+:1093C000575F9C913E905115421FDA756CE6F4B0E0
+:1093D00056EF3C01FD1DEF4CDB0CFD55C81D07533E
+:1093E000003EEB24BC7F35D1C4EECB26F3FB7425C5
+:1093F000FE063BDC374E4AB3E0FDA9E1DF919DE07C
+:1094000017FE78DD6D31704F4CF43F5CD2E1FD4EBC
+:10941000429EFBE48E42F0572EB06FA2B98526160D
+:109420009791F9DD485F16E523AF1A8919F6A36114
+:109430006803DE6B0944CB68B78C93C924A03B3129
+:109440006F711F567C87FBFA70EF527C9FD81428EF
+:10945000584BD30E4E0F62DD13CB03050D9620FC47
+:10946000455CA6163E5B383CDCF1C666D017BBCD2A
+:10947000E2FCC95262D3239F596766FBE6D855E2E6
+:10948000FCEDB3C2B9D41DE1183C06F6DFFB32791E
+:1094900092267FB1390647E3FA15D4C7D7D958BB0E
+:1094A0006E1E07BFEEA3B244885F8E6F0A1F6FA6C1
+:1094B00024B1735C2DF7EF8BEFB57A1FC68DD542C3
+:1094C000BC7641F0FB95C66B8B78FC01E110AD27B3
+:1094D000FAD178EFDC79B17AAFFC4B0E7BBEBE3EA1
+:1094E0004927E20FD1EF4DCF5B61E30B4B93D8F9E6
+:1094F0002A1807E8C77BC37DF1857B4A13C945CE8F
+:10950000FBEEF30E55DC9F8837779F9F84717EFDBD
+:10951000FAA5FD2996605CE140F0DF92C8E6E58699
+:1095200078BF82D0EF0AFBDE374E1C8FDFF347C1D6
+:109530003EFD45BB8CF7EA7F714837757B9879D73C
+:109540002731B85D13AFC77D33D2471CDBC28C2FE8
+:10955000EA89FB35E29EAA767EBBCBFC8B60FE10CF
+:10956000471C6EBCA59C8EC4BC77C7307CB8F799ED
+:10957000F09E05ED17E3BD77C7F857E2BEB0A9F13D
+:109580007C3BB7D7ECBEDE9F81F7BCA6313BC34026
+:10959000F4E08D72FD04F5D89B69654A3FC5FA0673
+:1095A000C916B2FF2E450F41B8EB5478ED0F772363
+:1095B000E257F4FBF961BE4F89C302E7B7255CBEF1
+:1095C0002DD95183FAAF381F7DFEB08CF1179F1350
+:1095D000E627F9BC55C2F3CF521721EB291F5AF9E0
+:1095E00064413388B92549845C17C3BEDF09E94665
+:1095F000B59F7CF9BDFDEC872454AEAE200D2857F5
+:1096000056FE58DDAE9ADCFB67D09FB4FEFBE1DC72
+:109610002E27D6B139899E4740EF2926C5201FD66F
+:109620003EF985314A19781F9CA67C77981EF8AFC1
+:1096300019D3AE461BA6BF48723C9644F1B727C962
+:10964000B50DD29EF759FFBDB5BD4C7E6C8D43B9AB
+:10965000D564FD2EF2757908E3EBF7C03B09141EC3
+:109660002613D39712740D7214EA2D5EA487E3F1CA
+:109670006BAA6662DE9E04741FF7CB295331CEEFCE
+:1096800097910E80F7A652471ED8253655B27B9982
+:109690006613F3B37B7F31F63570830C6BBBBF0C65
+:1096A000CEC1B68EFD3EB0F7B4E8FE7C10E2575A4C
+:1096B000AE63F18B093AFFFED490F1E223BD49E09D
+:1096C000878F1F69C4388F38B934AF21245ECACD63
+:1096D00071D1DB9E8576C21E83B01BB645E0BDA866
+:1096E000DAA183818F5C43189E45DC1BCC2154DFBB
+:1096F000EDA27084A04B91BFA64DF219A2F0FD120D
+:10970000F4E3D4DEE54B980F72EAE77AF48389F943
+:10971000C5BD9A5C06FE2E219FE64B366647E3FAEE
+:10972000FC3C22FE317FD95C4E27F3B81E3F3F92AE
+:10973000C17B29B16740BB5BCC244A47B7D4FCF25C
+:10974000B6225C678D211AF405E1F71958CF086F2E
+:10975000FF723F6565F78DA54036747286C2E76279
+:10976000FB30C0F9B23B9BDDBB23C38803FC8CEE0E
+:109770007DC3B7817DC23488F9AF297F3297E4A3D6
+:109780005E6D8673D4ADAF44F0F8222FBF4FECC8A6
+:1097900083F89CFAAAB47C8C13391AC07737BA0DB7
+:1097A000FE0CDCC794EF4854360EDAF2FD197AB895
+:1097B000AF9942F5359A2FD9722FCB0FF5AFD4D18F
+:1097C000FC922D4FCDD0D3FDE1BEC67F0AF2355BB2
+:1097D00076B17CBE7FA54CF3CD5B5E65F5E160495B
+:1097E00009ECC12D07677868FF67A2B9BCB7FBF128
+:1097F0009EB5FBE5E1BA503B6B6332E35B67B89D16
+:10980000F84C26595C05F01E11BEFEB2641D0F5ABD
+:1098100069C554AC57B42749E1DB25F3716EE5F710
+:10982000A32746929608E6B7F344513C1CE8188EED
+:109830007EC7AF9362989E6EF3E3FB38A21F014F81
+:10984000D19F187735C867E0CB9A78ACEC64863F37
+:109850003ACE461C679883DD2BAE4ACB03FC51BC45
+:10986000E939DEF4ECFCBB8DCD8FF61B9D8B72A02D
+:1098700000ECF807BEA2F53383F3D6D24941329308
+:109880002FB736317F6B203A0BE96962247F67A5D9
+:1098900050BD8E660E87C6E4687E6F46C02B51C2EF
+:1098A000719A381CD3FC78CFF24AD75DF11F5A77F2
+:1098B00008BE1CF05ECA81F6ABB7B3F5C4F07BCD31
+:1098C000FE8C18D4F7EE57F5776683A67D09C1B8EC
+:1098D00036774C16B6BF278298F13BD9DED72E33A8
+:1098E00097E9ADA0CF8A772C88E73A12EA47EC7B5C
+:1098F000AFA28DC56706D739A390AFD3C6D769632A
+:10990000EBF4AAE8951C0964CCB6F6A7E33EF8F799
+:10991000F5372A9FF7A7DAE7E1FA837D3D105ED697
+:10992000733AF9D6F022E6A981671F9C35F313F04C
+:1099300084FD8DED46A9E952CCB326599C9335FBA5
+:109940003BF31B8E57CADAD5DDCEE2B989A2A6EB6E
+:10995000BADD993A882B10ED6AC127101FB4FF3D7C
+:109960009ACCED8969246D80F8C4C7938BC2DA0D57
+:10997000F1BBF69CD813CDE2D5B5F68A9E787B274D
+:10998000DCAFF49C63EF0A8CD3D86FC0CFF49C2576
+:10999000D82E285FD4F9739C3FF6B73F0532607E1E
+:1099A00085A6B2E7153BD547B61C437E5D38B8ECBB
+:1099B000B64C9A7F35F98FC8CF0B53CBBEC8A4FCE9
+:1099C0007C7FB29FE547967D3114F25BFCACFE4490
+:1099D000C7F3C0EF89C73F63527250AF782D59412A
+:1099E000B8C9E53A027464022586AEC7F4AA09E351
+:1099F000F6045C074A0B4DBA8670F76FDFEEA307DB
+:109A0000E65729813F15B0F3713B805FAFB203F495
+:109A100044B17BDF3D7BFF8EF75D3E487675021ECD
+:109A2000EA23BB1665D2FC5D919FA01F4F72D03D0B
+:109A300001F615C54616D0F94A5D9B9CA03F91D50D
+:109A400076B31EE1CAED5E748D1728FC5ED9F7F37C
+:109A5000EFA5B2619C308FB19C0FD4EFFBF26FE0A9
+:109A6000F7AD3F63B183F97A6CC796DB40FF1ADB31
+:109A7000F1F6974C0EB3FB3962DE63C1AE49BF9776
+:109A8000B49B70FE633BAE5E01F5C7FDB6230BE8E9
+:109A900064C2315F13B0859EBD2FA5AAEEE590CFBD
+:109AA0002E1AD739A0DF4DC0E353AA540D4678F4DF
+:109AB00032787C85F167DDF1879BFD68FC54DF7FA0
+:109AC000A2FA3AFA917BC9203BF833C47D7AADBD46
+:109AD000F468255D1FFD3E21406710A24F4F3C6F8B
+:109AE000A68C24982F25D1AA7CB9395955BFC29686
+:109AF000A92A9F9274B5AA7C9A92A7CA4F1F315681
+:109B000055FF067BA92A7F63C93455FD4A47A52A1C
+:109B10009FE76B53D52F38D4AE2E3F4264C043FE2F
+:109B200051FBEB90169D74A0D9B5F874C3EB908EE1
+:109B3000FD0B0387D65E7CEDF9B6D7E1BBB0176BA2
+:109B4000EF3309FBF1CDB2C56B0C6F274ED2670521
+:109B5000DF1F9075EC3ED318ABEBEA94A2E07DA634
+:109B600089602FA648A8587CEE47E3004F0B983D2C
+:109B7000ED282006E3BEAD68873C6A6878E60F2CC6
+:109B80000E201DF8DE84C05CD5BA279E77A9D65D6D
+:109B90004A6ED5E0698D2A5F61BB5D557F4AD2066A
+:109BA00055F934E5071A3CDDAFCADF60DFA2C1D347
+:109BB000360D9E7EAE2A17F4DDC1ED5AFBC01E4560
+:109BC000D3F1FECE72C0C375A703888F92CED67232
+:109BD000C0D3B547DB105F853E6739B0CBE2430D9C
+:109BE000AF43EAA3E73168F75A6312A6071A15B420
+:109BF0006B1D6C1C81E9A1463B7EFF756309A6EFD6
+:109C0000343A307DAF712AA69D8D4E4CDB1ADBB005
+:109C1000FE738DEDCC2E16DBF7DE453AD807BA750C
+:109C20007E377882173F927703F0CBEE41FE6EC805
+:109C3000DF45EC374CA2F925C044E8BEFC294F377C
+:109C4000A43A028057371CCA8A82F1186D3A471E1F
+:109C5000E8E177A44CF8A13E9D90BB3738936CD1D6
+:109C60002C6FA6794436C6B34DF8A18312D73320A2
+:109C70004AD0A933E106C8F744B07277CA841B40C2
+:109C80000FFFC6FE73473FFFF91D2961FCE7CF9C1C
+:109C900056AC60D739FCD5702BC0E330B76F39486C
+:109CA0009E61094D4BF5790690B34707B8B7F08030
+:109CB000AEB409E0D0A6B3CFC178EFEB0D04E8B79E
+:109CC0004A62E75F51CF95CAE441CF0D263C4F1D54
+:109CD000D13956605C9914780CE0BC3DA512E1DEE8
+:109CE000630D6400FCBC294E968F0F3C26D943F2CD
+:109CF00006069F07526EFCB6E1F35838F83C9162B5
+:109D000063FAB6CF910E7A80C81FA974D4C17E3E83
+:109D100052EAB80AEFCF384D6CFF3AADDEABD03E19
+:109D2000E4289A1362E719926A60F7D1E16222D8B7
+:109D30003B6F91719F6BE1392195E97B482770CE8C
+:109D40009C1789E782233AF69E81B6FE020ED7B3AE
+:109D500083C2DBE316A632BDA26C56DD332FD0FEE4
+:109D60007AD64560D73DCEE1A88FF53450E82A3445
+:109D70003DDD708E959BEC1C24E8BF9D0F7FD1F2DA
+:109D8000673A6EFBEBEF68FD4FD645DA5186D8AEE9
+:109D900041F8DDC22B2F8C35A3FEB4B02ABD0CE4F4
+:109DA000E27CEE075C64D527A03B501F6D8427172B
+:109DB000975BF29A2904C9CAB84A233C25559DB637
+:109DC000A619D2D5C3EE37C21329B5A37635831AA7
+:109DD0005B47B77011F23FFFBB8D745E8BD7CB0A28
+:109DE0003BCF89FBAE355714CF22E8F7088F3BA253
+:109DF00040C0F3EA220E6FD16E1187D78914AE3FAF
+:109E0000E6909C0B6A3FD66740EF5D0BDFCD1EC02E
+:109E1000CFA02EE7FAE3074636AEF6FD1231EEE2AA
+:109E20005476FE3A62A49409FAE42D4C0EE4CEFD79
+:109E3000E2AE22BAFEDC0E9B0EE31516D7BD00780B
+:109E4000E86DE778349076D84FB33C4B3EF91D224D
+:109E5000264E758FF752F2D2DE692B0F9597857ECD
+:109E60006779A8BC2C09B496835C14F251F84F7D35
+:109E70008DD59C2F37203F3DD0B81EF3071B3D9852
+:109E80001E6A6CE17CB915CBDF697C98F3652FE71E
+:109E9000CB3BF17B47E35C4CF735BA583ECA19958A
+:109EA0000AFBC4ECC2F8C437B69808F8E77A3B4C12
+:109EB000189F4177C4638FC641FC9109EF716AE333
+:109EC00090B47CBE8F1E76F77B372505C6E98B1FC5
+:109ED000027D71C8C0F474982856E04BF98FFEE4F7
+:109EE00006D0AF0F2B8A15F4E982D4CD2CEF50ACFD
+:109EF000069A2F7C94E75D8AD504AC22F521E45BB9
+:109F0000873D8A3582E68B1F7D88957B093AF3C7AA
+:109F10003DBAF5060FF059221D80FD516ECE9C44CE
+:109F2000C50595D7A507605F4C495A3209F6C5CEDD
+:109F30001405E9639AB2E100E4A78FD8A687ABFACB
+:109F40000E4BDE4668571657A9877693D2D66C8497
+:109F5000769387DDAF0F6D3775D4AE8D909F61DF3F
+:109F6000A607FD7427F0B1F8603F222FCA059F169F
+:109F70007172A33B9C280F72DB9D280F045CCA669C
+:109F800057DE0DF6CFFA76C926C13C664B7D410AF5
+:109F90001093E886F74929BFBE3EF597D60DB45D0C
+:109FA0003DE4AFC5FC0F377CBBFCFBA6D430FCFB0B
+:109FB00043BEDF41DE43DCFB8746F60ECC331C2E6E
+:109FC000F51D4BACF88E2A715941CF7A9ECBF39791
+:109FD00020A5E59FF1B48B7F7F40E770C138AB527D
+:109FE000B91FB23F7FA84965FB5F738F648072CE53
+:109FF0001FEA526DAAF73CEA08BBBF76A9383B6D51
+:10A000009CB836EE6435693BE8C8EC1F6F520BF71D
+:10A01000DCB2FAC77F8B786A6D1C78DFB96A10E30F
+:10A02000A77381D750BA6E491D904FDE7B0938DC8B
+:10A030001B0E0EFDD643589C7BBF38241EEFAE5D31
+:10A040001771C5B3778D79FCBB767D822EFAAFAFE1
+:10A0500095C15FCFE04FF5BBC7607E158BAD04ECBB
+:10A0600056A1FCE77717E13F5A7EF66DF1C99B17C1
+:10A07000D7E1BB6561F8D8F3E1F898B8CFAF4D856B
+:10A080009E0AF7F3201E12DE3982737E65A26B1FD3
+:10A09000F4D35316F89B0ECEA171ECDDF083D1AE54
+:10A0A000FDF05D32B2B80611977C5AE7F915E86DFC
+:10A0B000EF3DFA19F2B36E1016748FBC41F3A097FE
+:10A0C000FDC3E67C13E04746F88DA1EF8F0F147FA8
+:10A0D000FB1B2EFFFAA76CDF8938D49E6D5F66A04C
+:10A0E000FDEE12FB62207854C8E3FD703FA4B72454
+:10A0F00012E56797447CF0DE71576902EA2D5DE94D
+:10A10000463DA4DFF6B9B82B3D1BFBD79E8FBB9213
+:10A110004BCC6CDCC953217D2FF95421C8BDDFF035
+:10A12000F8CB76A3A7E03DB00F8F8D40FFFE8D9258
+:10A13000BF10E0A03D5777BDB5A04CC9ED7FBEA6CE
+:10A14000EB9B04EBAB3DAEBB1BBE5DE979BB76FD83
+:10A15000DF08C4B98F5BFF1581F7EFAEFCFCDD199A
+:10A1600093AB805EE16A021219D345F5099ABF5498
+:10A17000FCD639899ED33343CEE5256FB3382E9E66
+:10A180006ACFE7FDDE095CED51C70D96FA8A305EB5
+:10A1900045F647E1BD601D7B6F43C473BDC9CFF376
+:10A1A000F4BC3E240DED709D19AAF3FA1D1F2DFA83
+:10A1B0001EF281088CEF78A6FD443CCCF58F9DF112
+:10A1C0003F794509D277BDED6F24F49DC0DAF5BD26
+:10A1D000AA7CD786E0FB56701FABF65F32CA252AF1
+:10A1E000C75A104FE435E3DA10F94ADAFEDC07EF1C
+:10A1F000D194DF5502C050BE36CF74D07695FC3C6A
+:10A200004448E48D0EDAAE929F1F8967252B8FE7B5
+:10A21000F53D9FB07CBA28FFE34CAC7F95E86F1CFE
+:10A220002B4F1679DEDFD5229F782396678AF62595
+:10A230002C9F23C6AF64EDADACFEE4ADFF9C097A64
+:10A240008DE0F733D2B89CE0EF5251FEEF4C2BBAC1
+:10A2500068BC8EBA9CCB07F10E55C51DD322DF8595
+:10A260007DDC2661EC61ED9D06B4E79F8D69CB0D29
+:10A27000BD2F2FE27A9CE5568CF3AA7B71F8769974
+:10A28000C73B811EB39CFBE92B640BFA617AEF6537
+:10A290007C7E203D70E5FA9755F8EC57CEDFD3462B
+:10A2A00047251DEFDC0F13F17E0219D689F102EE6E
+:10A2B0003449C427E0BD6A11571797451C707E8E3C
+:10A2C0007B2982BDA77AB213F9EFCA97987DBB6E3E
+:10A2D000CBEB28EF96CA0ADA97BE1EEA5A07F0E9D6
+:10A2E000B6B2772F57AEDF87FBF431C5C6FD60816C
+:10A2F00051A1F0BCB33FFC3D69F11785BFBAFC3FEB
+:10A300000C7FAD5D5DDCD75F7D85F17FDD56E607B7
+:10A31000B6733CFD49A71473783D02F03AB7A233F7
+:10A320003B5A8620EE4E8C77AB90DF2982F3566F36
+:10A33000839500DEBBA5CEDC0FC3E05F7BAE389F0C
+:10A34000415471693BFBC3F7E94BD0F7D3FF4DFA9A
+:10A350004ED4FB8D76F01B1F65EFE51577FEC9180F
+:10A360001A1FF44E1A3B070F6E677E311117172C18
+:10A37000B7323C71FF535DD53BE3C1FF24F6C3C444
+:10A3800048D206FE044AD7764ED776A06B41BF412D
+:10A390003F146D1706BE41FA252C2E91C3E9B7FD77
+:10A3A000E1FAE125E0FAE17F13AEBBA93E8CFEDBCA
+:10A3B0001722D04EA385F33F385C05BC23D32F0E64
+:10A3C000E7C8F4FF0C9C23D315959D43C07B20F96F
+:10A3D000A4C58F9877987D5AF44DF6E923199C4FC0
+:10A3E000E9FD188FABC57B4C7A3FBC27A45F1CEFFF
+:10A3F000EAF2FF30DEB570D3A6B5DC9FABFD5E9808
+:10A400003E20BFFB56E0F87FCD4FB0B061BFAA7CC5
+:10A41000F1FAB754E54B3CEF5F965F41D8FBFF5B29
+:10A42000FE05E15798F9FC2A1DF81FB5F24137C423
+:10A43000F923A0C71B5FFE7AD48730F9EA6C8CB78A
+:10A44000BA8DAFE58BF17FFFE47B94BEBE6860F60A
+:10A45000D663FB3F372839FDE965E1791D7184D06A
+:10A46000D9C2F5EF1B40CF5A48D8FB54DAFA0FA6F1
+:10A47000337B30C64951BE30D74C0C71941FCC9DF4
+:10A48000CBEE4BCF0507630CA63E172D9FA9273EA9
+:10A49000788FBBD2A2F799D0EFA9BEFF6EE2EF751D
+:10A4A00093B858D53D78D921639CDF9C12E62FBD27
+:10A4B000C5D286F787E71DBAEBDCF7602F6FF4147F
+:10A4C000B1B87771FFF0F7BA2BF1833E087A2A9C76
+:10A4D000FB24EE5F5F6340FFBAB6DD2ABE9F66CA0B
+:10A4E000128BA3D9C3E233C5FEA4EB3B64CA67F762
+:10A4F00060E0F7482A1B0CBEE1B9A067EF473DBBFF
+:10A50000BE64432EE0AF7E9274DC941B3CEFD4AF6C
+:10A51000FF0BB6D7F2676D7AB9F6D54F1A0F21BD8A
+:10A520008873D1B1461FE6B5F6D60513FF17FD9324
+:10A5300063FFE26D8274DC578E0FC7D075FB1B3B47
+:10A54000FF2D7B82B02308BB82D64E21F88878BFCE
+:10A55000D2976EE3EFB296A2DF83E8592AF8EDC1F5
+:10A56000FEFCF9D7E917D727D5E5FF61FE7CB9F4E2
+:10A570005F9BC4E4AA96EE8F56FD0CEDCF82BEB56C
+:10A58000F4BF006252E8F80BEA25BC273E7755ABD2
+:10A59000619CF4CDE97DB5E56406839B462E5CB1F4
+:10A5A0003C50783C878CE70B93BCC60E760F8187B6
+:10A5B000AFD3D5EF0353BC48191797ABEAF2FFFAB4
+:10A5C00039E0E4A26F2617894A9F48CBE8B76EE5C9
+:10A5D00012EB56FE9BEB0EB9A7B448D605EFE3404D
+:10A5E000FC35C481F678D9FDD4EACC56FCDD0352A3
+:10A5F0001288027E77EB5E99FD9E8EDEA14F0E796A
+:10A600003FAD8BF83E007A5C359EBD3BA48D9B76BA
+:10A61000F378EAD596DD78BF51FB0E9A88CB76F3B6
+:10A62000FEB4EFA189F6E29D03ED7B685332781CFE
+:10A63000763EC967712917E7A3DD20CF43FC35DDDE
+:10A640005F35A25DE1C6C74AEEF3A405F13227A348
+:10A650001FDF99977171BEA32EFF2FD3AF6CDD81E1
+:10A66000F7D8AE947E47643ADC407F822FF7F19BA7
+:10A67000574CC86FC43BF33D6B9EC1F7877ABE242D
+:10A68000E897BDD43BE313BBD835C40927BD4D566D
+:10A690008AD771C73C68AF1B7BC485F776C7BCE31C
+:10A6A00080887F9277C029C3BC853E23F49B20FF1E
+:10A6B000E2F7D9789CD5E5F2B92BF537FEA7FC8CEB
+:10A6C000E25E5DB7C15704BFE7E0D91381BF03A1C4
+:10A6D0009DFF9319BA8BBE93DC11E57A12F0348B8F
+:10A6E000CB09F15E7285CCDE49EFED94D15EB8EE18
+:10A6F0007F7EFBAB47954BDB15EA6DBD61CF6522D5
+:10A70000ADD7B17B2DF9E50AC649C2790DEC87C2F8
+:10A710009EA8AD7F4A297B2903ED5BE3F13DDADE9C
+:10A7200087D97C06C257FDFA008E3F60391FBF7E75
+:10A730006F912DF49D95F3197DE743DB297310DFAD
+:10A74000974B17FFD7CE2D3365E291A87CCD91BCF6
+:10A750004CEF254CFF5D403A315D440298BA08BB8E
+:10A76000CFB094D8315D4E9C98AE555C5D191837CA
+:10A770001448C0F8D317FF390AE8E6DC75E35A211C
+:10A7800046F1DBF22369F5BE9E3C85BD97F4C23FDE
+:10A790007F07F4D9F33F86CBE21B47A21C6448181D
+:10A7A0003FD37BA532BBD754F25DDC17E2FD5D32AF
+:10A7B00089F9E1962766E2FE09F2CDC46D826F82C7
+:10A7C0003F39E7B88EC5C3DC2AE17BC6ED7E1D6E3E
+:10A7D000B19C15995EF8DDB9F6DDAC3CA72EDA2BFD
+:10A7E000D17CCED80856BE26DA0BF74F16123FEEB4
+:10A7F000CBC570FB4486FB4B8C2F8ADF0BA02782D6
+:10A80000A1126DBFA2C3CCEE5110FF30E0FFB970B2
+:10A810007E0A174F3384F1F1D14319BF1F5DA6B6ED
+:10A82000870CE5E5F72965DF0778B40C71640D81C5
+:10A83000FA319D9B1E2C043B908E809FE6B3B1B7EE
+:10A84000A35F53B47B51291B01F59F9558BCBF678B
+:10A850002FBF6F4C0209A1FEB1B54A792ED42B1A35
+:10A86000C2F8D3407085DF517486392F8AF8D1D170
+:10A87000706643BB3CC177D29E95587EF2E35B6F16
+:10A88000DC68415F8207F4E31715D744186FB49171
+:10A89000100BCCFFA7FC7E1B69C800BBE8AAC74C05
+:10A8A0003AD02F3EA2E218EEF7FC819EB721FD9828
+:10A8B0009E9B21FD233D37437A9C9E9B213D41CFAA
+:10A8C000CD90AE386F87C7CCC989218EB9D0BFF083
+:10A8D000F769E75B3984F1D7BEF1F71A71FCFB1415
+:10A8E00017C2B70FDF7B08FEDEEDB3D18194988BE2
+:10A8F000D05BCFDEBFA39F7420B808FFA3B67C0A4D
+:10A90000C76BEE6E3DCAFFDC767FD4CA907A2B8788
+:10A9100018B17DCE0B27A3A0FF6E5B1F7C1D125DBF
+:10A92000F24C1DCBAF7CFCB91B378E82F93BBE0FBE
+:10A930007441F7F96A4873DB7FFB00FC5E2AED1F68
+:10A94000E3247AA4C0663C2F68D6A1858358D7B388
+:10A95000D19D9BA0FDB32F0C859550BE43D8BE0161
+:10A960003A92C2AD7703AEE74653A010EE0BDD7806
+:10A97000410E1BA77D9F528A704E067A43FEDDCAA8
+:10A9800053465F026FDF747F6BFB23E2FD15E0A58A
+:10A990000AC8A5AFA2402FACE4F104EDBB87FD06C9
+:10A9A000D6E9392413F8BDDAD131EAFDB78BE34992
+:10A9B000A4397B8D4EC0D7B37B4F0D83F789297E99
+:10A9C00086C17BC5DB865C45427FEF3167EC978FA4
+:10A9D0003C1887F5F1F769E7916D15103733DFBC47
+:10A9E000FF0D58D242DBF10A889B599C241D8474C8
+:10A9F00089923919E265C47D8365234A0FC2969A0C
+:10AA000061AF447DAE14984C887C283747F247D814
+:10AA1000853C8A55E5A724A5AAEA4F53B254E5D34D
+:10AA2000478C54958B7167D80B54F546C70486C282
+:10AA3000798EAE83BD03FFA48CF186392F1CB97EBD
+:10AA400024CDCF7C6A0EBE43F92C2F9FF95CB91739
+:10AA5000F0D143E169A40AD5E9921F6C7E103AD384
+:10AA60009C176AF73E71D0A15CC679E112E7848138
+:10AA7000DE4F16EDB5E704CA371F00BE39FAC5D957
+:10AA800036F0DB3E3BF6CB148847FDCD10FEAE0C16
+:10AA90003F3F0C44377DFB435218DDBC259327C351
+:10AAA000D00D44F2323A64E9CCC3EC7EDE95F2B5C7
+:10AAB0004F81AFA1BDC043427F7F576BDF1B6DB499
+:10AAC000FFE636B047BD2BC30DA5BE7B932BE16FD0
+:10AAD0003948EF64F9B6BB93E3F0BB07F46137B7CD
+:10AAE000F70D52B83E55BBFFEEE4C2603959775CB2
+:10AAF000559FDC2935ABF21B33D5F97B4B9B43DBF0
+:10AB00000FA48FAD7C7889D19503F76EA5B0BF37C0
+:10AB10002CE6F3FF010980D5200080000000000032
+:10AB20001F8B08000000000000FFB5190B5454658E
+:10AB3000FABBF7CE0B1960782810427798440A8444
+:10AB4000895728B08DA01ED7DA1A4C8F545693E53A
+:10AB500003794DE0B6F4D8E318AD8FB6076D5B69A5
+:10AB60006B355696E7E439B144462536AE5B49EB82
+:10AB7000D654A266E499D8424C70267A6D9D5AF755
+:10AB8000FBFEFF5E672E605B9DD64EE79FEFFFFFEB
+:10AB9000FB7FEF279014CA70CE0008F6ACCC7099FA
+:10ABA0000106F7D61AE41880D3F4EFE2F0DAB8F928
+:10ABB0007A8303CF5700383ACCE3CF01D601140390
+:10ABC0005C29817BA2F3145960E760FF65F1BD2F1A
+:10ABD000010849009E178DDEED5684E35C06676E22
+:10ABE000F89E8DF04E0618D972FFEFBF2AC2F525E8
+:10ABF000B0E30E8CC4430DBD9BD7755C1471CD9F23
+:10AC000004D7D17779968098806B7055B407E200AD
+:10AC10009A6A633C623E9E67860E992E04C8F1A62E
+:10AC2000B59B52018E8A22C039440778A014EFE305
+:10AC30001B045F24A739EFA4DFB9C867CC2FC7E78F
+:10AC40004532B035BF3294E9C67BD77E87E71CBF5B
+:10AC500003A291CE3F804A8F034C5C2E04BBBD19EA
+:10AC6000FE3F233F4DBD1218909F61F01DBA5A6000
+:10AC7000D7CCA925002BE9A74CFB1D0690D86F194E
+:10AC8000707F95B2BFB27CE5A5108BF056FD4020D9
+:10AC90009BBD0FA7F1FFD57F6F3798F17CF553DA95
+:10ACA0007D420F53902FE5FB3AF0B377EB77E23D0F
+:10ACB00053F85E23DCFD9984EF367669BF5F24C7C5
+:10ACC000240DE6E08F0228382DB16D91DE6B36F150
+:10ACD000F7E64ADFBD7B09EAB1E925C96EC4ADD10B
+:10ACE000DDD3E200F98339A8E4D4F1F26BDA8C7A8F
+:10ACF0002A0CC3A7764BF3BD745F17CAA89E315EBA
+:10AD0000CE60C9E2F82C1C5F73C5D70B01F135F793
+:10AD1000E8D0D07E00CF4611E4083CCFED31AEF252
+:10AD20009AC3F4072D9CC7FC9E2F1366E7F2751D8E
+:10AD3000D101ED1C2F70BF9821803E09F141B56013
+:10AD4000DF8E4B5F4F7225C9BF4F009F5CC09E587E
+:10AD50006442FD5CC19FA37D3324E08F946C1DE1B0
+:10AD600059A8C8FD8AD27F7C23E0778B7B164F439E
+:10AD70000AE050D7B23ED40C6C906D0CDF12F0E8B4
+:10AD8000492F7DF1CEF416A4F3324960F6DF171F88
+:10AD90001A16107F5F45B4D026B0F7EFA4F755BE62
+:10ADA000FAF4CE7437E36B8E6510F526382E904E8C
+:10ADB000478F974758AE3A1854F52B7177217F9CEF
+:10ADC0002BDD3EFB12F4DBD1A5603122BD974B6831
+:10ADD0003808C3ABDC8FAB49D63351AE823F81E834
+:10ADE0006C96176E91F1BBE4D67B41971821371D05
+:10ADF000F733552FAA1CC7D3A1E22DF73B90BFD143
+:10AE00001D02B39F46BBCCECB3B1FCE4834B107F77
+:10AE1000A35FB20B48CFB2EEBD47487E1D6B3B40EF
+:10AE2000771E40E7DA6EB62E33997D521EE38BD93A
+:10AE3000AD8846417CAD5660C6A7357C1EE67B0CCE
+:10AE4000BC513F7C06CE043818EB7C9EF85BF3FBCC
+:10AE5000CFFB9610B51BCAE3991F90AD9D1BA63F73
+:10AE6000DF006046FA43DBA3BD4F303C68AF25618D
+:10AE70007B3DB127EB700B9E9F7853CFCC755FC5A0
+:10AE8000C3A76E4178CDF66826E71309E049A5F31C
+:10AE900027A67B3D7861A518EA6F21B977C6D8B798
+:10AEA000E3F9F147A73FBB13E1DA67A7D9894CF271
+:10AEB0001F19E57D3C1D01DA7F3E957D07291CEFBA
+:10AEC0000AC52FA56766DC574EE7CF24DA098FAA9B
+:10AED000BFA147A31C80F2FA127C791634BD93827D
+:10AEE0006750C487EBC49DC704B4CBDB0CAE83C4EE
+:10AEF000F7EA47FE7AA80CF9A97AE6370FCF44FAA9
+:10AF00006ADF9B0CF44E58AFE3E2406C2097FCDF05
+:10AF1000C6FD5F914FDD8E28CBC71171A6A1235EC0
+:10AF2000033775A75A3E8E883775C0650CF5828E3B
+:10AF3000F8A957FCAA5E741D25BA1A20C0E3228422
+:10AF40000C64570592E0A07810BAC7C8E43FD6CE8B
+:10AF5000466591D1512F828BE27941229852C86F78
+:10AF60005D5C7EC17BA63F7117CA66923541F5FBD9
+:10AF7000AC853322EDB3BFF115B2CFCD46669FC38A
+:10AF8000513C2F8DC5F31F399E7DBFC2F405F38759
+:10AF900033F9A4F5DF5A38171C14EF0ADAE4C29B20
+:10AFA000706D51F4722CC5295849EE1DF7EF3AC067
+:10AFB000E4B9F5E6A38477BF99E90F0E70B90705E8
+:10AFC0009E27D5F7569842A02B247AB7317AD5FD23
+:10AFD000C12D87F35CF8FEE00B397980F6BC4CF2AA
+:10AFE0000FFE05E5732AC67FEC365C3BF7BF3B8559
+:10AFF000F2E0587AEB5B47D97B2A3C2CF038544F6F
+:10B000007CE0FEF799CE64A213C3088B0F0377CDC3
+:10B0100060F29B2BE5C691FE8327B4F48DA5537D8A
+:10B020005FA54F7D5FBD37CD2A32398E18FC7994EC
+:10B03000F75FCC90357C8DC4FAF3E2CDB46FE17547
+:10B040004402C211F656433F51BF35268CDB485FA0
+:10B050004D8D606F03B6EFA1B889ABCF85E7F529B9
+:10B060002F2B7203A709ED78B162679094C8EC6E3C
+:10B070001170BB5EACC4EDABA0430FE82F47C475A5
+:10B08000BF35A0FD0D773CA07745C65DCF51F1746B
+:10B09000CE4F8FBB9E4AC8A6F83D6231B3BA669EBA
+:10B0A00055D0B17BE9904EF7F0DCEE433BF0741ADB
+:10B0B000ED6D48CFE3A2738115E5536FF0E5911F65
+:10B0C000A8DF3D2EBAD8FEB0706005E91B74BE3C07
+:10B0D00056EFC41B40C03A2338D9EE77505DF625B1
+:10B0E000B0B812D4434D27E22DAA12DD9DE6703C84
+:10B0F00054E367510EEEA35C2B685FF557B49BA237
+:10B100007CEDFD303F5AF8B895FB5D51A2E8EE9812
+:10B11000C05F6E57F4DC061D12F7679E47CB14B96B
+:10B1200063DD2245D62D8D4A9C0FC69A3C12F25300
+:10B13000B61BF5827099CEB797568C02D08AFA9DCD
+:10B14000053EFE5EB7369E530E59CAF2720ECBCB49
+:10B15000B31475AF17DC407A3551FEC2F52EC12FFE
+:10B16000D1FA2B08B1D501161DADA806B6CE012720
+:10B170005BE7819BADF3A19DAD0BA083AD97829F53
+:10B18000AD7081AF0D583EB8DD3288F9187EBD52E2
+:10B19000A4BC5CB464E27AFC71455E67970746F92B
+:10B1A000929F2F8F79E04A61749D4D2E53B399DDA4
+:10B1B000AB7231927DE27751E04DA1B50202EC9D78
+:10B1C0008BC990F19DD920EB08AE020783E7FE48BA
+:10B1D0007994065C3A57EE0472A99AD84E7628768E
+:10B1E000524C365D1CD6D787561E1754BD01D24926
+:10B1F000F960BC3E2183E82C8AAEFC5CC690F1DA93
+:10B20000B6F79D3A8CA34585952D36840F593FE5B9
+:10B210007059E5F399081FD976D2A99B49765E59F2
+:10B22000A8B76315BA6ED83907CF4D18FCA3504E96
+:10B23000924D82525C5D51B179807E6794ACEB7423
+:10B24000E857C6DB80C5195714809FD5B36865E4FD
+:10B250002735BC7E5D63E17ADB6B70BD4A7EDA60C8
+:10B26000F2C5CAC8D39A757393295F6E30F0F73F61
+:10B270009A2CE7BC827232223E5341984F3CF744ED
+:10B28000211C10E496566B18FF8FC0F7CF1FC277B2
+:10B290006B8AEB5D16CF4D5940FA4F53F2796767D1
+:10B2A000598A5D24FC16863F1093D5D28A470752EF
+:10B2B0009C1FD27BC1186E771F5AB95ECEB69A32E8
+:10B2C0001D1F5827D80FAEFB7A978FE2D02748086A
+:10B2D000BEF399D53540743489818C42D4D71DD1C1
+:10B2E000C70C6427AA1D0BA8BCA5C87F9B03BC067E
+:10B2F000E61FE59633F5982DEC07C1E5F81ECAA5C3
+:10B30000C8E9ACD2E371498D7B1FADA5AEF62A3CEE
+:10B31000213C41A2A7490AAD20BB3815FF9EE1138D
+:10B32000E6A753B93D2AF1AB674FEF6D691C744234
+:10B33000841F36EDF9E6AB0F50DF4DA3663B5D0F82
+:10B34000FBDF9616EA0BB01AD4C417D52F67751B0E
+:10B350007DD45F95ED3E7F39DDAB78AFDF4671FA86
+:10B36000E2FE401B95CBC19EC369DC2FD43AFE6B35
+:10B37000E1E7E493B9120575ACCB5E90BC46E4AB53
+:10B3800099EA0B05F6207CDC84761347F779BFA990
+:10B39000F6950DBDAF19A82FC1673CC46FAD42FF34
+:10B3A000AAAD375C4AF562AD57DB2FD6F57BD713D4
+:10B3B000DD753BB4FB6ABFD9A47C5F4FF59A8DEA7B
+:10B3C0003EEDBD26EA37F3A8FED3EE67662AFDA65A
+:10B3D00092FF40A933572A77883F33EBFF0C5E2357
+:10B3E000F2D6FC688BDD4270BAD9CEE26DFD0666FE
+:10B3F000C7EA7DD89AC86C44F5DBDA8DC0EA675598
+:10B400008EF94F1B1DA48FFCA793595D8CF53CABA7
+:10B4100047309EF0FE1E6522A0DD3D171FCA1411A5
+:10B42000CF733DD976AAB75F5EEB807F9D17A64F9D
+:10B43000ADF7E74A3BAB0CD447DD887D146E35F79A
+:10B440003ED96642B87913D00D242D3B8EEAA6E290
+:10B45000FD1278E91DF03E508E6B971A4F52B0BE28
+:10B460008F9047943C09E409FA79A3A2B7E8EC0469
+:10B47000CD798CFD1CCDF771A599DAEF3D0E7F6E6D
+:10B4800009C573FE7DBCE302CDFD36C16DF791CDDC
+:10B4900004F03FBC57AE88B1C2BF82CD1D12E71782
+:10B4A00068EE6F889DB79FECBBFC0BDD183B704BC3
+:10B4B000647765018047502FB386B5E7C507DB2168
+:10B4C00016F1471DD48D99577880EA16A3ACDD5F3D
+:10B4D000AEDAC55498AA99439C913BB7FBD1219110
+:10B4E000D945099CF7707911C9590F5E79BCDC46C2
+:10B4F00069A5FB6603F38B59BD2D768A47939D5A48
+:10B50000F927D768E59FEAD2CA3B6D9556DEE96E0A
+:10B51000ADBCCF6DD5CAD7EAD1CACFB67196E6FE1B
+:10B52000B4F64A0D3C7DF302CDFDF3BD0B3570CE74
+:10B530008EAB34F767742CD39CE777AFD69CAB7691
+:10B5400036D60E2EF4358FB13311C408FDAB7A56C2
+:10B55000EDA070FFAD1A3CFF6FFD6F1FA3FFA7C8E2
+:10B56000D731DEBD153B7437B9EB65D13CAE9D9943
+:10B570002794EB59BFF6B69C5815437795FCE654D3
+:10B58000F21B94FF91C3160EDBFDF67D14CF0A8EDD
+:10B5900038AB88AEA2807B1F85F392A1F6AA38BA99
+:10B5A000EF00D932858F9CE8FEE5A502E8347E8560
+:10B5B000F094B03CAFF0AC93E2F072D977DE36167F
+:10B5C0006EC9E94BC2F320A194E7856A4714E822CB
+:10B5D000E452A1EC0325E92961F9ABF323EC07C0A0
+:10B5E00040FD8068F2B65927AA77EC9B25568FB9A3
+:10B5F000587DF686E06273A545267F06C5F7DF25F0
+:10B60000BBDECEC4B8764AB4CBAC9E13026DC45434
+:10B610009018A3A4E5A9AF76501F87ED2CCD2BFF82
+:10B6200074476DB52797916F0994F0B699FEF56749
+:10B63000BA8E64A2FC0704CBFA42FCF6AD5927335C
+:10B64000287F1925944401CD4F1C47E9FCCCDC240C
+:10B6500019F9C3781B10650F89C273ABC0FA9093B8
+:10B66000F4D8CC08FFDDA867790B94BEEC1A455ED0
+:10B670006A5FB654C13F804FACC2787E4DF71B4C19
+:10B680002E7529C3CA1CCA6DB7E0FB374C3517505D
+:10B690005F0A8E423BEFE7D53E2D4DFA297955EDF5
+:10B6A0006BCF76BF2E6548D32FC3CEC409E7916315
+:10B6B000E75E61BEF9FB039BA2591E1AD894CEE641
+:10B6C0008BE1F74FB1F7AF71BFA3B193EB5ADFD75F
+:10B6D000D8DFF59E8F34E781A4903E0DF90FEC4A38
+:10B6E0009D7735CA6FE4056309F5ABA8B7385B7180
+:10B6F000F8FDC03DD3E710BEFFCDE7A74CBEFD6B04
+:10B70000FD6CEEA6F2796CED110607D606D83A96D6
+:10B710004FB5BF5557C3DF209BEAE59030C93ED1F6
+:10B72000BCE6311BEF83FA674FA9A47CDC9F6ED087
+:10B73000F1358BC3A9A5260ECF9B4F6B506FDE480A
+:10B74000FD6DBF000E01ED61A9E07CEC7AE4BB3A2F
+:10B75000D9956BA37A7275284F87FED0941FB8567F
+:10B76000407DBE1EEFCA27FE052C065313189D59B7
+:10B77000D4370C899E3C0163C14D4F765753FD3F32
+:10B7800034C9738A3276ADADAB9AFA832103F78F51
+:10B790005B9E7C84F9C3B716D74C7AE71341F2312C
+:10B7A0007B7E49F06E67F616302C8CF8BB823AAF80
+:10B7B000A17E9BFA9B60145F67DBF8DF5F2AC7AC52
+:10B7C0004B6D3CAEDD426B31E9E5EE2CFA7BCAE80D
+:10B7D0006623905F203E8748F87AF85C760AF2404C
+:10B7E000750D566FAC5F2878D5E8A3F8A1CE751615
+:10B7F000DBACECBD241B9FD724DD67F4B6B1FCEEB7
+:10B80000CFA8463ADBF558EF50DF7010D81C6D8496
+:10B81000E661117A596CE3FD17DC08C0CF93B7D10C
+:10B820007943EFC0318A27DF67BAAE24390C8872BA
+:10B8300009C59386D8BDACDE6BB6C9EC3BA497F1C5
+:10B840008F71E14ED2CF2F380F5C45FA6D300578FD
+:10B85000DDAACC03CF26B791E5FE8772D9FCCB9E3B
+:10B8600041F4A9F422FDCDB688B99D4A7FF89D1F09
+:10B87000F60B75AEA5C2835B3664919FA15EF8BCE2
+:10B880005112AE5B38C1F70F2AFA3E96E2F410FE71
+:10B89000D56E3EF70BDB4DFBCD4749CFBD66162776
+:10B8A000CFF6FD583E1BF6F43279209FD7127F1158
+:10B8B0007CDE1BC9E748CFE18772E59FCF5F309DF3
+:10B8C000FF1D29B8ED9B0C19BF6FD8FDC611B2BB87
+:10B8D00006751EDFA59D33182761FF9A30D11C1D08
+:10B8E000B34F445D6654BF9FAAD37E8F0539CDA95F
+:10B8F000BBC9DFA97E71F0BF8BA9F9B84BE96B8496
+:10B90000C0EB2C1F103EF287F58287E545758ED17E
+:10B910002660DE23DDBA5A589E90CE35DBC99EBB29
+:10B92000D006FDE4073A47349B5F8FE9A3BF35B8E3
+:10B930007691FCD6BC53994C7D76E79B0B947E8D1B
+:10B94000E7A962C52E8B093FD19F1BC7ECB548A163
+:10B95000AFC484F55026857C8FC4E715CAFC63D339
+:10B96000EB9A3EEFBF32596853001E000000000002
+:10B9700000000000000000001F8B08000000000015
+:10B9800000FFFB51CFC0F0038AC515191844D41924
+:10B99000184C341818566820C46989B5B829D39F43
+:10B9A000C9C2C0900DC4B9409C0FC47C4C0C0CFCA7
+:10B9B0004CC4EB171445B0F50419188480FC6F02D1
+:10B9C0000C0CD7851818BE8B30300803F92E40F1C7
+:10B9D0000420CE01626FA0580B905E04C4DD402CA1
+:10B9E000228ADF7C5102F26B8551F937D1F87B84D2
+:10B9F000F0EB5710C12FAF47401E1B16D1223F3E20
+:10BA00002229D03B10585F01955F26C7C0D0270F71
+:10BA10008C7FA8B80192FC4B20BB5C0EC2F69660EE
+:10BA2000602806F20D15B09BEB03942F01CA7D85AB
+:10BA3000CA0300CCCCBA8C680300000000000000F0
+:10BA40001F8B08000000000000FFE57D0B78144507
+:10BA5000B670F574F7CC2499994C12F2E03D490088
+:10BA600011030E2144C0709924C0A2460D021A147D
+:10BA7000750292849097887EECAEFE330189A0A86F
+:10BA8000F1B9AC17DD416137B2E8060C1835E0605A
+:10BA900000B32EBAC145C0E72680BC362443F0B9B6
+:10BAA000CB5E6F9D53D533DD9D09C4C7DE7FEFFFAD
+:10BAB0008F9F5FA5BAAAEB71DEE7D4E942328F27E8
+:10BAC000640A21DFC18F969F8B8490F850596F20B4
+:10BAD0002E924188D766F46D4CA6CF88237AE6680B
+:10BAE0005A981DD1375843EFE9CBD59EA434691835
+:10BAF000210F791C5812E223844EB55A2005F51601
+:10BB0000A83B93E07D3A3E21FDE8F80F46E2F8308D
+:10BB10002D99181A671031E07B53ADF989B01E4298
+:10BB20006A47E6C3FC163B21FD7B9F9F8E88EBA7EF
+:10BB3000EF0DC1F724FA9EB5EFEF2965570EFD13FF
+:10BB4000F6DF6DF66D1408F1EFFCC77158EF9986BA
+:10BB5000390E135D6F76B7D93F05EABE6C9F89B683
+:10BB6000E76EFBC026D1FEE5DB4409DA0D3B23F08E
+:10BB7000FDCE75820FEA95A6D647AEA4F5C03691E4
+:10BB80003C0FD3F82D069240C87133613F8715EB07
+:10BB90004511AC5ABE7ED76D305F49A38944D0F7BA
+:10BBA0008F37882EA82FD928F8089DAFFCB5078CB1
+:10BBB00003E878C53EA13EC241EB1B1F333AE83E85
+:10BBC00097EFFCD8D646E17CDA63260E23EEA3A4D9
+:10BBD0003E8D9052DF96E903E8FBA59B052780BECA
+:10BBE00074DDD94E585F69833C5CA4E32DAE8B2293
+:10BBF0008E916CEEEF08CCD77C14E7DB260F83F92F
+:10BC00004ACEDF650424E56E93912ECAE93A60DFDF
+:10BC1000CABCA73D6B713E059EE52FD2F968BF8A6D
+:10BC20009705276CB1C240DCB08ECED7220A5EB039
+:10BC3000C0FEAA8D23ACEA7D146E877D94FAD61BD4
+:10BC4000A75B607DEB8D4569A1F116D7FDA7767DD9
+:10BC50006B5313DD69BDE3F3B487827444A85E4A75
+:10BC6000880BE94FF219818E95E7E78518C4F7E252
+:10BC70003A9138CCA1F1153AF07EC0E9748795F17C
+:10BC800001C7DB123BE02C84B76E3BC7A314C8543A
+:10BC90008FAF948F003EE87A6A3D762C1FF72461BF
+:10BCA000F9A4C781707BDA3312CBB51E273E7FC65D
+:10BCB0003301CB751E1796CF796660E9F3E463BF55
+:10BCC000E73D05586EF0B8F1F96F3D2558D679AAD1
+:10BCD000F0F926CF322C377BBCF8FC65CF2A2CEB51
+:10BCE0003DB5586E057CD1B2C1E3C37EDB3D7558CE
+:10BCF000367AEAF1F9EB9E462CD77038DAB248B6BC
+:10BD000044E16073113B453B89CD7365CBB41E9B09
+:10BD1000CFEA09F3BCD9465A4F70D33A85CB80326B
+:10BD20007FB689D60754B1F621F7921C33AD0FF1D7
+:10BD3000B2F69435AE9C085A4FA965ED23D67973B7
+:10BD400022697D848FB58FDAECCF89A2F551F5ACED
+:10BD50007D4C13C9B5D0FA183FABA7EF73E55A690C
+:10BD60003DBD95D5333FF1E6DA683DB38DBD3FA9C2
+:10BD7000C3273A2C3DF1B055762C2014574DDEB92F
+:10BD80002E89CA9BAD46C75DC449C87BDEF92E89A2
+:10BD9000CA8706D985ED6DDEC5AC6E74617BB77759
+:10BDA00029F6DF2EBBB15DAABE0FDBB71BDDD89E27
+:10BDB000505D83ED8DB217DB47563F8AED8D462FE0
+:10BDC000B64FAA5E8BF5D7651FB6E755AFC7FEAF76
+:10BDD0001B7DD8FEF8FD9B5C5369FD05C1BD1DE4CC
+:10BDE000DE0AC15D4252819EEA9340EED570F9F9B8
+:10BDF0001C101D6DAFE96F443EDCFA6EE60BC0BF50
+:10BE0000F8EB07F5A2DF3E988CE3BC89E3C8741C0D
+:10BE1000F1E2E3A4BF3741334EFA7B25CA382D380F
+:10BE20004E44DFC6D9FADE24ED7ADE2B55C6D90F93
+:10BE3000FCB4C2DAB77DA5FF394BBB9E3F9729E31F
+:10BE40007C84EB89E9DB7A1A3ED0C2A7E183207CAF
+:10BE50008EE238F17D5B4FC6412D7C320E06E1D378
+:10BE600081E3F4EFDB380D07B5F069381884CF971C
+:10BE7000089FC17DDB57C6212D7C320E05E1F35FA3
+:10BE8000B89EE4BE8DB3FD532D7CB67F1A848F49D6
+:10BE900080F50CEFDBBE323FD3C227F3B3207CEC3E
+:10BEA00038CEA57D1B67FB675AF86CFF2C089FFEF8
+:10BEB00038CEE8BEED2BF3AF5AF864FE35089F1478
+:10BEC00001E033B66FEB69FC5C0B9FC6CF83F0B922
+:10BED0000CC719DFB7F54C38AE85CF84E341F86461
+:10BEE000E0BE26F66D9CC6E35AF8341E0FC26732D8
+:10BEF0008E33B96FFB9A70420B9F092782F0998E9F
+:10BF0000E364BBEB985146C7B1F63ECEEB67B4F0A5
+:10BF100079FD4C103ED7E338D3E838A9171F675294
+:10BF2000A7163E933A83F029C071AEEADB38AF77AB
+:10BF30006AE1F37A67103E8538CEB57DDBD7A42E53
+:10BF40002D7C267531F88C3B50956BA3ED54173A38
+:10BF500045FACA951D2E9740EBA29DD545BB93800F
+:10BF60005D222AF606697589F47DCBE698F4078987
+:10BF7000DAEEC8B913E8C74AAD31B5DD113D21523B
+:10BF800063E7C4B86235F5B8190334FDE3F35334FD
+:10BF9000ED8905A334EDFDDDE99AFAC092499AFED8
+:10BFA00083AB7234F5A1CBAED6F44FF6DEA0A9A7D1
+:10BFB000AEBA59D37F78ED7C4DFB256B4B35ED97B1
+:10BFC000FA9668EA97D5FD42D37F74FD724DFBE582
+:10BFD0008D0F6ADAC7FA1FD7D4C7B53CA3E93FBEB5
+:10BFE000F5794DFB15873769DA27B66DD5D4AF3CA7
+:10BFF000F9BACECEB3D88F5FC6EB22D03D61767F43
+:10C000007FE6F7F8AD46AC1B0758D08EDF652D7282
+:10C010001CA3F835BEB5C0D18FE217700A7E45F675
+:10C0200080924BDAE8F37B26B92FB1D3E7F718DD1E
+:10C0300097DBC3D8A7941E049204A5C300A5BEFD38
+:10C040000199D163CEC0F323DAE9FB9586C0881845
+:10C050005ACF12B31B817E770ACC2F8A144915F46C
+:10C060008B3411F40B1E48CE7CC1ABA2D75583296B
+:10C070001F0AA17157C9EE24B033DEAA6EF7821DE4
+:10C08000523398EE6B0021CD42BBDF4BFDB4070667
+:10C090001725B9E9782623B5D3D5F31BE9FC693810
+:10C0A0007F0BD0EB7B307F7CCFF94D291334F39B92
+:10C0B000879468E6371BE9FC7642DEAF3EC5E7A70A
+:10C0C000489844C85F845338BF694809CEFF8091BF
+:10C0D000FA2BEAF92383F31F86FD7FD6DBFE532676
+:10C0E00069F73FA454BB7F23DBFF91EAB37CFE4892
+:10C0F000DCFF51E12CDBFF9052B67F131B3738BFBA
+:10C100002D08FF93307F672FF39B52B3B4FB1F5A68
+:10C11000A6DDBF89CDDF5DFD2D9FDF82F39F13BEBE
+:10C1200065FB1F5A86F31B4D6E27D08F7160649597
+:10C130008FCE4F1D6107490472A1F340393216FDBD
+:10C14000E49784145CC73D918CDEBE8AA4F486F229
+:10C15000C6CBFC581F956C99D4EFE2B4BE7873B689
+:10C1600011E412B6537F65215FEA1D8D22D2377923
+:10C17000D2E41B4ED7DBD9287AA17EC793937D20CA
+:10C18000FF2A4DE4F67C784F227E78FEF953A39F78
+:10C1900057EF4B5F2EAC958FB7A9F82DE847E59088
+:10C1A00091551698D7AEA91FA17E10A1FEC527D420
+:10C1B000CF2094248FCA6CBECFA8BF04F536EA2FD7
+:10C1C000413B21D5B85FE2757D308CAE3F9F283F63
+:10C1D00017EEF32664293A9EC4F8F7C81AC107F887
+:10C1E000B87D5914057E683D85DE384D9DEE0FFB08
+:10C1F00007AE127CCF0B38861BE033938F4760BDB0
+:10C20000B45E6067EF1CA2E8EF4F51B060D5408A82
+:10C210008BD038B3884B4EA4EFCF595A2843E8A2AD
+:10C220005510062F01FA5920539711E0E78D276921
+:10C230009C38E87A6FB6B3F167BAE4636DAAF51477
+:10C24000C866573E5D4F41A188EB9F3543DBFED169
+:10C25000CE2897610C2D573D81F3CCC9D7B6DF545A
+:10C26000A0ADCF756BEB54EFC9A0F76E29D13FA7F6
+:10C2700060A1FB9C17842B5D285DE7AD1C0EB756B3
+:10C28000C95E0D5EC16D55DA21A0E026B82F7C5F36
+:10C29000ECD9FFF665DA7AA1575B5FB04A373EA763
+:10C2A0009BE31CFF47803E687902E883C2F318A72E
+:10C2B0008F905CD5D2C78DC16D30FA50F6715C623B
+:10C2C0002838BE8ED1C7C2DAA8F0F45018A4079758
+:10C2D0009ABE147AB88DD3C3A79C1E8AD76AE96A1E
+:10C2E0002EF1AD4CA2EFDFB26617E2E9A050C8E82C
+:10C2F000E1970A3DB469E8C1CDE9418FBFDB383D24
+:10C30000DCF673460F7A7CB6717A685B7B4E262921
+:10C310003DF14AF1A0A9533CE8F06E37023D507C54
+:10C3200084A587F9C17DD38DD3FA02DED6035F9C45
+:10C330001EB03D05C04E104EF87E6ACFFE544E68CA
+:10C34000EAC56BC3E3BFB2313BEE986A5DE5F557D2
+:10C35000C51D53F55B5C3753535FE49BABE95FBC92
+:10C36000B650D3BEB07691A67DC1AA3B35F542EF5B
+:10C37000CF35FD6F5F56AD69BFB56AB5A6FD969224
+:10C38000C734F5B9EE5F6BFADF54B05ED33E27FFDA
+:10C39000454DFBAC195B34F599AED734FD0D3B2F01
+:10C3A000BD1EE831EBA048C0FE38E67120DD1FF766
+:10C3B0008CC4F2A4C7897C71DA3301CB7D8DCD4F5B
+:10C3C0005C49BB7C192888264C7F16911842F62CB4
+:10C3D0007757AFCA027D4E50EFFE717951B5771095
+:10C3E00095530607C2396FAD91F8C711228052E20A
+:10C3F000F307C4507B561B6D8FEBBD3D6FAD14B67C
+:10C400003DAB4D0A3B6EE5E38543ED61E233217EB2
+:10C410002603C13EEAE2F6B9BEBD4C20F9EAE78444
+:10C420002C47FE8F3130FD5C666472A26C6BFF1C82
+:10C430006283BA7F44D585E6ABA7CC9508F491AA70
+:10C44000E1E3E2B59769E43C81E86D3CD0D938CDB1
+:10C45000F3C575576ADEEBD825E2BA2B4086507DCE
+:10C460003D8CE4070CA097FDCD43668D8675BACE52
+:10C470001A405E35C6A3FDD8E19911774C023CE61F
+:10C480006379D25380E5718F1BCB639E122C8F781A
+:10C49000AAB06CF32CC3F2338F17CB4F3CABB0FC7C
+:10C4A000C8538BE561CF5A2C0F7A7C581EF0D461AB
+:10C4B000F9BEA71ECB564F23969D1E17960ABF297D
+:10C4C000F0D0D3DD49AEA74F03FD5D80CEE2C407B7
+:10C4D000AA570D0AD159E28A87ABBD59A171F3D68B
+:10C4E0009A389D2468E86108F864E3815E4C9C5E9C
+:10C4F000C2B7E7AD952FD89ED526871DBFF2F97F2D
+:10C500000DBDCDF991F416A2A7813A7A4ABD183D26
+:10C510004D12C787E8698EC1CEF41FA7A787601F99
+:10C5200061FC8F6230EAC6ABEC3A57148B67F37349
+:10C53000076AD1B278369F7B051DAE15ED3FDF4807
+:10C54000C073F7C8BF8F80787DF761AA28937BDF1F
+:10C550009F9E5E7A87BB0BFDA0221F55A2E37AB691
+:10C56000474432B84618C80C924EC8EAE1BF75CEAF
+:10C570004FC3BA4462E17D9F736698F32802674F08
+:10C58000891787EB0AEB576360BCE3CFFC2313CA20
+:10C59000398614E6DF348B68DF13FF0B4E806F5053
+:10C5A0001F999C4910070F0C37DAD13EF059B4F0AF
+:10C5B000F3D27A66087EAB298C5A51DFD72621FC4C
+:10C5C000867D35A27F1FE07731397F3178CEF70D38
+:10C5D000F897C0F362F2F1627291B81C2F37D2FD66
+:10C5E00077ED1C9DFEA003E4E085E1AD9C5FE9D7FB
+:10C5F000F3BC287D2F3AEE4A50E8B87508A1F388BD
+:10C60000A21DC7EF6EB884C92FC5EEDB66F2F50533
+:10C61000AF6792B5E33DC5F94F19AFBBE5051BF810
+:10C620005B4B920CF66361F0A094E5F5C9768BDA6A
+:10C63000FE6CD4D6BB6B8519F568273AA2678F06C6
+:10C640003D61B71F1B06723B094B659C254946FBA4
+:10C65000312AF74ED7A546333FCFC7E4C1E6189439
+:10C6600017A73D66ECFF53AFA7B77194F510D24002
+:10C670008E9A411ED3B6D4DEFBF74ACFD217463C82
+:10C68000F76D92BF02FBD04CFFFF0EFC0D22615DE7
+:10C6900019B7B25EF49A2E87E79B35F3D1F71CCA1F
+:10C6A00019EB772917E21B891C57E896EA8B635C24
+:10C6B0009F2CAE8BB06BEDCF184DBDB2B1BF5D639B
+:10C6C0008FC21F54FE922A4102FA29E3E4D325596E
+:10C6D0005609747D6F429010E85660FDCACD6D46D4
+:10C6E000B703CE9519DE7A5B1FC5DF4C89927C8932
+:10C6F000B916CF614BEA2F9D0A7AE64CC38A0488AB
+:10C700001B2C16BBEFC90FF3BE2C3179BFC827070E
+:10C71000B4F63DA70F42C7559E635C94588EABEAB2
+:10C720001D06168FD18F9B00E3C65F1C3E159BF73D
+:10C730004F073B410FA78AC6B34637CA45FA5F6623
+:10C74000084E0AFCDE14F313243A7E695D3BC62DC5
+:10C750004ECADE11BFBC80BCECB93F4BD2F128D52C
+:10C76000BEBCA415E6993F814F441C377D4CE5F8CB
+:10C77000A93FC904E410394F7B65624886FB3B063C
+:10C7800062C80CF93BF31B16E701BC4F81BF47E5BC
+:10C79000E61D24DF867820B599E0DF9C218619000C
+:10C7A000A733E47DDB38151E7225238733958294E9
+:10C7B0001E4CC1F1DDFDC1EF3215D4B48A63E0B97E
+:10C7C000A4F83FC2771847720B98B750C09E7B8978
+:10C7D000B91AE897FA511A3F8DFA519A3AF5A334EB
+:10C7E000F522724302E425143D29139F8070D2B4D0
+:10C7F0008F92EC88C762525503F6D1AF79FC6DBEBB
+:10C800009D4803E93ECB5F7D36B390EEE76A89C56C
+:10C81000FD9473F545B10C0EA5253EA3CBD2737FD5
+:10C82000471BC6DD48253F8CC7CECF6F36621E053D
+:10C83000B44A99DCF449E97DFF890DA22BC206FDBB
+:10C84000E87365BDC9DF7FFFFAFD12F238EEA3B4CD
+:10C850006E2601FAEB9127C0F723D7092E5F187EC9
+:10C860002AE474AFE8A73B017EE343F1ACFB74F527
+:10C87000D51CBE4AFD295DFB0F962FFD8846BEBC28
+:10C8800029BAEF93C6337902F017A400F2D70F1E2E
+:10C890003FA9C7F8AB811F7FB2F10769F99E8EFFF0
+:10C8A000D44FBAFE613DD6BF3EDCFACB5F7D69BB9B
+:10C8B00097EA97D23F3C652394DF4E49B5094E8AEB
+:10C8C000F7B28D2B6D2E903B92D7067C71CA27CE86
+:10C8D00008470F87B87CA506884580782BFC49C798
+:10C8E0003FBDE9A1EBC09EF86AA36CC7386A9DC939
+:10C8F0006FA2F45CD1B0288F8CC17A3BAB3F70162D
+:10C90000E8BFB2513EA2A6D3D2DF3D95007935945F
+:10C9100052061A92A0F4A37F52B1E1F3E9606F547A
+:10C920009200F2ABFE3D98FF9B58D48785C6E89EE7
+:10C93000ED18984980F7D9AFB2E1A1B3A20DFE6A14
+:10C94000C33890BE7F09F7375A246B3F3C27B98222
+:10C950005C01F2548107F1317F63C58BBF1AD34E5E
+:10C96000D7D3B1E14F36410527C54FEAAE5FF09B03
+:10C97000D71DBDCBEF4ECA876ABB56D14F8E46EE50
+:10C980002735B1B24CF6DBAEA4F2A46CBDECF4D208
+:10C99000C7652FBDF0DB67207EFDA1C9399C8EBF26
+:10C9A000F8A53D0727D1FAE22D72BF3CB60D8B905A
+:10C9B00010C24B25FD7F597A080FA5AFEC313A46DE
+:10C9C000B3E7F7C686F0B178CB2E2319DD131EB975
+:10C9D000F5BB8C6D963078A96F9F0E76DF8A17BFF6
+:10C9E0003682BC3BB5532089C961E0B97E0FDA8538
+:10C9F0000027C423C753106FBAFE95142FA05F14ED
+:10CA00003CE9DB37717902E339D2909E5F7E9DCE9F
+:10CA10005FF291C909FB2F79F92E1BECE38454C511
+:10CA2000E8FAD9950920DF4A646F821D4BF6BCE411
+:10CA3000B9BB91DE8AF7DF9DC0E292AEFE06D495C7
+:10CA4000DEFEB0BF85EBE6E0FE8A881BE9AEE45966
+:10CA500031DF47CB2F2532634B18BEB8566672F2D2
+:10CA6000C4F35423D0FD9D50F4C0FB22D70377625A
+:10CA7000DCF36EBE176A3162FD4B33C3D330D9C0CD
+:10CA8000E52CD32B417ADDF000EA8BD3835D8970EE
+:10CA9000BE5619D20FA837C4FDD312197E989EC175
+:10CAA000F7A89EC985E7D0BF5576458CD1BC877A5B
+:10CAB00045997F299F9FAE3B12ECB51309E1FD8F8D
+:10CAC0009FCB0ADF53BB42455F2AFE66FCBE613541
+:10CAD000E36F85DF7D336740FB170718FFC07BA03E
+:10CAE00067E9BAFC89D8BE6BB680F2C044FCE1F8B5
+:10CAF0007A83CCF95ADBAED0095DB72444ABE805A4
+:10CB0000C68F45F8A35E2F7A92BEA7929795309F65
+:10CB1000ADE7780ADF1673FE9F216BF99FAC8BEFB0
+:10CB2000533E6599ECFBED33C0AF943FBD0EE0572B
+:10CB3000391FF6FDB7CDCD076FA67CFAB77A854FC2
+:10CB4000B5F253CFA7255BEF26409F7A3EFDDBA0D1
+:10CB50002A12964FE9F3B07C3AA8ED7F547E2AF072
+:10CB6000AB02F84585E0A7C8C3DEE0A8978756D991
+:10CB700011561ED2DF0192D993FE14BA53E8ADF4D8
+:10CB8000F7E54341EE04E952A1BB205D2A74A7DF1B
+:10CB9000AF167EFAF64932C175E5BF26A3FF5CD613
+:10CBA000C4F242E97B7B0766209C5CA8C648EDDEA8
+:10CBB00081FDD4759FAE5EAFEBEFD2D5F375FDDD91
+:10CBC000BA7A95A67F5963B39120FEFD9A7EE2B2B0
+:10CBD00067C8D1B870F4EA637E59C359A317E8C295
+:10CBE00012C0F7E5E5C40B7986811D22C605BA2877
+:10CBF0008C6B207EB139D9E7A5726365048B3F74D5
+:10CC0000D903B6585AAE8C61F540BCB106E49EF229
+:10CC10003C10C1E28A5DF9015B8CCA9F6A6F1251B8
+:10CC20006EB7F9C88C707E16D528C8476DA4B77644
+:10CC300076EE354DB40C590671A55AD10936F81D5A
+:10CC4000D537D9E0DCA9AB29F5FA02FA7CE11F451A
+:10CC50004C7BE98AB48D817511AF4BEAAFF26F4E10
+:10CC600012EFD359747F0B9A989F73C71A9D3D4258
+:10CC7000D6203D1559961A419E527FE288F6BC8611
+:10CC8000F145291FAF649DB65D799FD201FAF3A5E6
+:10CC90001BB4ED6EEE0F7FA0F0C9583296FBA32CAB
+:10CCA0000EC3E5F23431EDFA028A8FAE1691986820
+:10CCB000BDBB49447C746F167C104F23DE78E4B70B
+:10CCC0000A124079A8C0A903F8C9D8BBBCEAD8F6B3
+:10CCD00069E62F816EB67F3CE63F69D9B1FDC3118D
+:10CCE0006F40FDD543433E263DFBE7EE8CC073FF0E
+:10CCF000AE9D56A4F7AE1DEF0EF925D45F33396112
+:10CD00009D5D3BBF1E03F4D3B5DC5402F2AE6B3025
+:10CD10008BC7AED8F1F59836D4AFF733FD6164FE1A
+:10CD20006177D33F3E13FA4149770576C3CE28E4B5
+:10CD3000A7CAD72330DFBB6BC7D7996ECB4FB79F3E
+:10CD40000A9EE7D16525055B617D312C8FA1F28DAF
+:10CD5000892F54D3F9CB1B761917D0F6DC37FF395E
+:10CD600006E468D756660F75CA6DCF411E4394F12D
+:10CD7000DC7299E2AB13988A3ACDBF3366E402DFE6
+:10CD8000F484CB3F313ED65778A4FCAF8187E06274
+:10CD9000F2CEEA330BB0EF6F3FFB18E39A26A44BB9
+:10CDA00065BF7FABAF467BE562FBCEFE7F6EDF8269
+:10CDB000BF2FFB76FF9BEFFB38D7BB7A3EE849E7F6
+:10CDC0003BEEC1FA4B5627AEB78FF4EE85FDC7FF99
+:10CDD000FBEEFF7BE37D2BC5BBEDE2FBFECDFF5AF7
+:10CDE000BCFFF1368E773B7ED7F3E63F717DDF5790
+:10CDF000CEBDF96F8EF7DEF6AFD8F5AD862A7B068D
+:10CE00005D5F01A9B582613137BEDB92E1806CD7ED
+:10CE100073FD308F0ECE4BC3F84D0123F30B4D90B5
+:10CE200047077EFB1C41890BA21F751DB71FAE1B58
+:10CE3000548276C875AE8799DD2055B566D3FEADB0
+:10CE4000390B9C987349D20FBBA13E7B32AF6BFD6F
+:10CE5000C9F704E212A81D7F5DCE352D60D75EEFC5
+:10CE600012D1EEA525DABB1F0C99CE9E4FD0FA3D0C
+:10CE700073DDDAFA4D05DAFA1C3EDE8D84ADFFC6AD
+:10CE80007CC107715553F613F11067352D948990C5
+:10CE90000CF942552BC1BF9893AF7D7F1FF8C1E3BA
+:10CEA0007F3C1C534D0A1C97205C48B6E8DC48FACE
+:10CEB0000047BEEED6D9637D90CF4C242783E38D07
+:10CEC000E54E8C83737F5BE6EFCB9655ADC0CFB25A
+:10CED000CECF56FCE5DEE04DB8FF8DE3A484E02F15
+:10CEE000BB44F4BF659DFFADE0E5FBE243C1E38FCA
+:10CEF000C5CB973ABC0CB2B808F0ABCCFD85A916EF
+:10CF000027AB0FCA2778DEC8FD05A99F8B78D342CF
+:10CF100079DF8BCCE66C385F338F1430DE71FD1A0D
+:10CF200011F583394DC075E54F90318FF873437E0D
+:10CF300026E03B6FDC1515BF60CB70023C1771B863
+:10CF400017912AB45FC9F9EFBECBCA84730682F683
+:10CF5000EF221721D752BFAD284BF0475278154B1F
+:10CF6000C41B9D0E716F811CD1C4BDB575F8FD4702
+:10CF700042689C8BF5EF4DBEFCD4E55FA93C3B328B
+:10CF80008CFA411E9EBB4958DC56F1AF6F6F627040
+:10CF9000AC2C137C2948777E395F75EEF81CE7834B
+:10CFA000BFDE3B0EE564F6A3A3A3D1EF7739D06FC4
+:10CFB000A8E47E43B7D7110D71AEEEA6547E3E9B1A
+:10CFC0006B53CB55A5DCCFFDEEBF407E212DBBA61C
+:10CFD0000AB522F8712480F15CEFD408B2314CFE1E
+:10CFE000EBFF311938FD54611C007E6226E091FD93
+:10CFF0008AE9ABD1B12ABCADB9F69434A6271EE0BC
+:10D000007744750EF963E10B7E3EC0757F44DBF417
+:10D01000FC30FBAD35B13856DE5BDFE2779C373450
+:10D0200025CB00971BA68A9A73FB5526EE978D2376
+:10D03000E3605D796F5D659B087869119DF0DD6641
+:10D0400065D359A33BCC79B01E9E303EC4D58FCA60
+:10D05000CE2280E7D1872308F8D1EFF273C634F8E7
+:10D060006E220D433A2E882BFE9AC3B5D364C77245
+:10D07000565EB61C4FE74D6BB08F85A3D401BC7FC5
+:10D08000271821E3218987BDA7F41B50C6FAB51BD9
+:10D09000ED15E1F63F3C82EDBF9838EF9920FCFB9F
+:10D0A000E12DFB51AB3F07EC83A93CAED283AE0927
+:10D0B000F247F70CC107FA1BFC61ACE7B1EF84DF64
+:10D0C00055BEB3BE81E95985EEF570DECBE1ACCC3F
+:10D0D0007FDCC4E2AF7FE2FCA5C05981AF7EBD4AD0
+:10D0E0007F2AAFA6A8E351D7378E7D19EC9B8A26FD
+:10D0F000C16EA04355486D46E0C3CAC6C764386FC9
+:10D1000099EB60E312297F8C3A9FA0D3C4F23B9A3B
+:10D11000D3AFBC0DE8E4DC1A13E842E2BAE3AC0D8D
+:10D12000E4F0BB06E79FE17B6AEF7B22D9780179C7
+:10D13000F5B1A7CE3555528F9B8CEB9C55962D4360
+:10D14000F8EC96B25D72A28A9E3A4DB1D8AE3C1F01
+:10D1500050E64887E7743E5C87F7111381EF42D2AF
+:10D16000EA5BF1FBD45BAA62181D96D4EF32623DF4
+:10D1700019FB2BF329F3E8F969769E36EF78416EB7
+:10D18000DB20804B9EC9BFD419864E1F332BE78E00
+:10D19000DF534FB828DD8EF9FF484F2C55F4441B60
+:10D1A000E6B92BEFCF35333E57E989C4707A62492F
+:10D1B000B52311F0B064476A2230C9923F4E4B0844
+:10D1C000A7273EF0B073E343FCBBEEAED9544F5CEF
+:10D1D000AED213B323904EF4EFE59A95738D8BE89E
+:10D1E00009056FFFC3F2E603D01361F8FB46B3569F
+:10D1F0004FDCD854887AE2C6D9A2E6FBAA6BCD17D9
+:10D20000D313D90973B12E3BA3C2D0CF07DCBF39EA
+:10D21000C4F3FB611ED0176BCC76849B5E6FF42643
+:10D22000D7C7F655AEFF5F82B322D797CC61F743DD
+:10D23000F4A44382F4BC642E95EB02D02393EB4B11
+:10D240006EE5714E9D9CCD07399BA196B3ECFD0A0E
+:10D2500037D30B958DC9BF9A47DB6FAE959D66DAC4
+:10D26000FFE690DCCD54CBDD356609E1DC43EE967C
+:10D2700030B97BAE691CDA4FBDEDEF532E6FA93C80
+:10D280001BE60C431F05F3A234DFDF1D1DFB76DA1E
+:10D290002BC02FEF8A787EFB39B703F68D7D3B03D9
+:10D2A000ECE9537C3DDBB8FCEBF4F85C53A91CC8FB
+:10D2B000BD83D9D3E59B45845F4503E3FF8A619134
+:10D2C0003E07AD4F4FFF16CF6117EF60E7B0740711
+:10D2D00079D92AFC2F7EB7AD06CE0516AF17F01C04
+:10D2E00019BE5F0078167378163917E3394AF1DAF8
+:10D2F000F0E73FE5BCDFA2A6F5180F5FE4D3F62BFD
+:10D300001F76F529F047F24C0C0F79AF08BEF5C92E
+:10D3100090CFA0EBE75C8DE747E5F5DAE707F97E0C
+:10D32000178AFEB457E8FBE4CFCCBFD3C3FBA01EE3
+:10D330002E253F122EFB295C32FEF570E90D0ED42E
+:10D34000BEC7F3013D3C0E2B72259D64001F7E6E0F
+:10D3500070A15CF1BE43E142E7BBE3B1E19AFB405F
+:10D360008E73B8BC6B70D7F4877E1502F62B5EB750
+:10D37000654F02ADCFAB2763E178A178AD560F07BB
+:10D38000F57E8303F5FABCAA2D02E4C72EE4DFFB89
+:10D3900095F81EC37B546E5D46F53CEDBF20DDE481
+:10D3A0008673F0FD1101949B0ADDC64730FB258E84
+:10D3B000CBA1A3030253513F350A76E4477F04D340
+:10D3C00057144F70BF4BF3C4AFA773BCB0B8522310
+:10D3D000C36325C51BF0F3F4265EAF6376E02D4AE8
+:10D3E000BD5EF0390490ABBB64765F8C40E2048E86
+:10D3F00004957E84F3D5EC04159E77B433FADF28C8
+:10D4000038F1818FFEF743F0DC2BDD333BA6AFF420
+:10D41000AEC0293E428BE7FD11AD79E3FAC1F99B1D
+:10D42000E0C47B739A62F09CE8582DBBFF2595BF42
+:10D43000A7E70BF03BD4F7D1CC8485437EF38C086F
+:10D44000CC0FC57953985DA6964FFA7B80BE6FFED0
+:10D45000512569457B2C94C7E87EDE04E3CD10346A
+:10D46000F94E1009033AFF09C6BFD57C81F14992F4
+:10D470001DF396EFB22BCFEDECBB2C5E6F1E9C79AB
+:10D48000681E85EFB955A2135CA89B0C8E835920AA
+:10D490006F1E9409F0CBB97DB28BE98128D43B850E
+:10D4A000EF1EC5EFD90A590E1A29BC8FE997A37C44
+:10D4B0003D1F51BDED82580AA91F0FF7E0CC76EE53
+:10D4C0009AE680784BC6FE9570CE392BD77EF02039
+:10D4D000E07335BB07E9C8AA5CF4D3EEBA53407ECB
+:10D4E0003B4CF106EFCF999D7CF0209DF7D655F18E
+:10D4F000786E39CF157F239C63CEDB273A1DB4DFCE
+:10D5000082EBAD1638C7BC66A448DC2AF8DC4A5A60
+:10D5100031BE33AFEACE39B0EE12AA0FC56428F798
+:10D520004F4B84FA3A01DFAFF4BA8DF0BD66EBDA07
+:10D53000B3C60C3A7F11ED0760AF5CC7FA556E10A9
+:10D540009C90FA5DD4F418CACBA20D025E34D34A83
+:10D55000ED5F331BD767A6E3B6AEA3EFD37A31BC3A
+:10D560000FE36E88B911CE272BE93AF1FD09D57882
+:10D570002E5D44DFA3CDA475C39D38DEA275028164
+:10D58000EF034B26243F3201C6DB273BA1FDD0AE83
+:10D590005F1B61DDB7D1F9FAD3F117886DD3A03FD6
+:10D5A000F9A560C7FB87EA4660DCAD0B360C2F544B
+:10D5B0000DC73AE6133B100C923A1F654704FB4E29
+:10D5C000B86859750DECABCD1B9F6C40BA3A6B0433
+:10D5D0003D7E8CC2DB4D873C6A64792ECDDEA3C6CE
+:10D5E00036951CFD282215DFBFA3311BF3261692AA
+:10D5F0007CCC9B7057337BA47D65840FE26AEDB2CF
+:10D600007D083C6F5E69C2E79D2F31FDD339B80DAF
+:10D61000E3DB27D6C904BE5F5CB12EF569C0E389A0
+:10D62000CD32D29BF82CCB1B287E89C5C99AD7B1A5
+:10D63000714F2C35B27BB5A09DD68B5F54F20AB4E6
+:10D6400072ACC8518A724A2F97F4726BD193D54647
+:10D6500020D91EF26AE9749457A554EF00A1F59001
+:10D6600057836A306EAA975795C4A2C8A974885F79
+:10D6700016960FBE6D2DD0F1ADEC838156FF6B5F1A
+:10D680003E057AB7CC4AE04985647F5A6074418090
+:10D690005FE6356DF912F8A0645E04DEC7751CF014
+:10D6A000007CB3260ECFAF8B7C85086F252FB77813
+:10D6B000AD96CE95F8E35CB7485C6AFD5512455CC3
+:10D6C000AA7E87EEA3F44AE7B9BD51F081A83C7465
+:10D6D0005FFBDEBB33B06EC7752DE3F6C11A2BD2EC
+:10D6E000F3A19F9F5D09F47ADBBD02017B9D78DD8C
+:10D6F00035A00F2BD60A0E880F17DFCBDE2FA6EF33
+:10D70000C3BA0FFD9AD115A56F07D07FC5BAC7F66A
+:10D7100062FF0D8203C63FB4BE10ED8912AF48B060
+:10D720007D433BFA0F544F619E59B3574C00FAAFFB
+:10D73000B8DF64075349A123852EDBF97D08C4ECCB
+:10D740001C338BBEB70A1615DF931EC50221A84FE6
+:10D75000814E2ABD8CCEDA5F929D403617A74BF6DC
+:10D760001DFC09AE5FC567E74C87EF748AA97E048C
+:10D770003A6D5E976B043BE2844FC0FC8A9E74490D
+:10D780002C6A3B4AA1CB670526AF7BD0A38E0E7BCC
+:10D79000D01DA74B85FE2851A35F59B64F26F0FD3B
+:10D7A000BD9E1EDD72FD8D90FF51F832DD0F5D6F65
+:10D7B0006ECDCFD15E57E048EB09502F9258DE8FE7
+:10D7C000C20FE512CB0FFBDEEBD3CDBF2982E7877B
+:10D7D000013F882C7FC94FE77D7BF30B982F79663B
+:10D7E00053FB7568DFBC41E900E0BFD94AFCE87F24
+:10D7F000F8500E953688986F4D247FE62C95DFAE55
+:10D80000E4BF2CFE8315E15DBAD5E4CBA3EF976EA0
+:10D810003F3A06F311960730BFC7BB4960E71FDEEA
+:10D82000B631F0FD50A9C4F270F476C1F04816E7A5
+:10D83000EA782DAA00EC36A18EDDB3575A7F936C9F
+:10D8400052C5750745CA382FED87E7635E8A67B80A
+:10D850001F01D6A7BEDF4DC9BFE97891D15F69A38B
+:10D860008CF65C69DD964EC8C32C3D6C423FB7B266
+:10D87000EEAC11FCD8DC3FBC84F7F355368A9A3CF9
+:10D88000BC1EF96F75A2DF04F95B0DE5787E43EBF2
+:10D89000ED58AF0F9F077AB13CADC57FD8B1DD4BD6
+:10D8A00041B8F895DFD9F0BEBED68D36FCEEA9EEB4
+:10D8B000C2F9A73DF2DDEA575F30DFED34FC4109E4
+:10D8C000EBBA485DBE601D936B747D99F961E2C44B
+:10D8D000417BEBA52F9F837CEC8EAD7F7B0ED65BCF
+:10D8E000F65FE79E83BC1AB233C20EF648E5A60F78
+:10D8F000309F5579AF2492D97F9D2FFE0EF3803B48
+:10D900003F343961B4CE1D278680BDD1B9E5DB0433
+:10D91000C8EF5DBA631AC673966ECB4D2461E205FB
+:10D920004A0974EBEB431EB21E5FCD0DCD98FF7319
+:10D9300086E21BE443307FB1BE9CE5833A78DEE2A9
+:10D94000E6F0F9DE3DF2141B665D3F19E46203B3B5
+:10D950000B2E9AAF7880E2F1F23EE06FF36A2E4F21
+:10D96000C2E3EF0CFC41F15413A9CD57FCB261E1C5
+:10D970006F9E81B686B85EF315FD7D809B924F3E0B
+:10D980002BD2F55824F0CDD6DF637E28E02DCF01D1
+:10D99000F2F9CB2110173E290730FE10D861C2EFF3
+:10D9A0002C4B771C42FEE9DCB61FF3B509CFEBEE3A
+:10D9B00024C11FCBC3E5B19ECA0D5696E7C8E10F3F
+:10D9C00079900E1B3EE7F98E8C8E953CC8DEF21FD7
+:10D9D0005B2253F87D2A2C4FB37CC3C73CAF308405
+:10D9E0002F6102E0A9FD8279A50A1CEC00872BD4E7
+:10D9F000F9BCE1F34C8379DF1C5F803F90D3C17C9D
+:10DA00005D5A1F04F99B3EE11009230F3AD7B33C3E
+:10DA1000E04E39FCF7CC4A7E6FB39E4F7D7DCBEB59
+:10DA2000BDD8FABF2F7C1A221D38AE1E4E1DE7C38B
+:10DA3000CBF1E39CEF7FF0F7216582FEFB93CF8172
+:10DA40001ECB1BDA8D789F89E23FF1FD76F0785A84
+:10DA5000C72611F33E6BEA9B518EEBE545053F2748
+:10DA6000D1AFF71BBEDE8A46A6273AB65A7D163AD4
+:10DA70004EC75BAF213D576C6EC7BCD3BD75AF18A9
+:10DA8000DB54E7CBA0277CAAF577BCBC6B0CCA6D36
+:10DA90007EBF987E1E63149BA7B229FC3C959BCF4A
+:10DAA0006AE659ECAD37DA2D179FEFB4E4BA09C630
+:10DAB0003BDDCAECA5D3F5E20C5F98F94F71BD4987
+:10DAC000482D3B0FA5FA12EF59B3B27BD5445B2426
+:10DAD000DA5F4BAD130E47F783D288792F2BAA79E3
+:10DAE0009ECC7DCE24C0F70AEBD504D6BB12E0ABAA
+:10DAF000F2E365BB9B80DD2627E567A8CF5994F547
+:10DB00001BFB19884F85FFA5D61989E07F12C93BF9
+:10DB100008D6715DCAD712E8BF560F8BDF93F34763
+:10DB200087C1F356C9BE278E8EDB3A557042E8B5E1
+:10DB300027DDFB347186992EED7DB1F80D1CDD5F7C
+:10DB4000B7D380F6A0D5E0B7D32EC41AD19A840EED
+:10DB5000AC8338A404FC1402F3211EF49867C1FDC1
+:10DB6000C83642CD53E8E79434F79F444F9074F79A
+:10DB7000A19003C328BD5A38BD2A71392BFB9B8E57
+:10DB8000DB86F7ACC4A4916A20DF355637DA0D4F37
+:10DB9000F0FB69E86F24E441C49248A7FAFE263AF4
+:10DBA000AFE6FB383AAFA61EE3D2D6E36648C7C25B
+:10DBB000E99738BE8EE9A205E11033CDA0F86B7964
+:10DBC000C31342EB8E89274E3FB45F6BC1EF012830
+:10DBD0007B79D5FBB058B4EBA6EBD3C889E8B43653
+:10DBE000AF81AD53F3DC4E1C02EEDFA57D4ED7AB0B
+:10DBF000A917467179271109E49DC5DC4A38FCBB99
+:10DC000035F0BE5FDA373801F043B85FED2590CFCD
+:10DC100012CDF741E7D7F4B7437480CDAF1D870C21
+:10DC2000B2ABBF43BD9CEBBF5196FC2551949E32D5
+:10DC30008756616276561249C3EFA59BFAA17C4ACA
+:10DC40005996837927422DA3AB616B08F2CDB000C2
+:10DC5000CF9BBA3F12ED5193997823D2E17B36E204
+:10DC600095D361161FCF43702C37D0A1A45594D6FD
+:10DC7000E87B4D811CC3428A847A68A2E35746B987
+:10DC8000AAA3289FD6CC742719C6C2F6DE5EB93B7C
+:10DC90000BB9F65288081AAAF7EE69198C2204EF1C
+:10DCA000F120DEBD7B80C66B953A15ECF09D7F6D53
+:10DCB00064B0EE3253795F9BC2EA8F3EB47725DCC5
+:10DCC00037936ECF7F14F649CCF65178DEE58FD5C9
+:10DCD000DCF3DD9B7E51D63972833F17EE05BE3AE9
+:10DCE000C0EEF51D6E0D7E778F7A78A345A9FBD126
+:10DCF0008FC86FD88F72ADBC7E3FB61BA04ECBA134
+:10DD000071FEDC81749F2F471D9A9674291DAFA167
+:10DD100030093ED97F35EAD01EF8EE3004878F57A0
+:10DD2000EE1E148283B4FCC33D2D93D570F8700FA2
+:10DD3000D8217D85C3AB0F7D8870E8EBBE295D6C73
+:10DD400007BC5C936DC0FBD6AE386CC1F80AFD45CC
+:10DD5000A03EE2E3ACEFE5BB6CC51FA1E3EC54D3FE
+:10DD600097F29E4257BDD14D2AB18F62F76C6AE996
+:10DD7000A72BCAF536ACAB25CA758F351EF78FF7C2
+:10DD8000005CE3763BA78E0BD135B1B8C7C1FDEE81
+:10DD9000A32CF35BA354F2F29AEC25620AC4C98166
+:10DDA00017E243FB895FE68D1841F719EF3260DE19
+:10DDB000FC288BFB20CC632B08F82177EC0AE21EB1
+:10DDC000278821BE50E6ABD9C1FCF59A42836F3952
+:10DDD0003BEF1560BC107DB4E9E823C0E8A3B11D9A
+:10DDE000E9A3A2A99DD14763754E64063B37033F63
+:10DDF000BF9604C602DE3BA2BE9A2651FA1F1A1530
+:10DE0000A801BA91BDE7A6E55D8A703D1D163F7C6D
+:10DE10007DCABE7AC36F6D4BCA4369E04FEE33E0F3
+:10DE200079970237A55F8C85E5C5B658DD5F03FCA1
+:10DE30002A27B4ED85ED6F6D791FF3366CFB6ED834
+:10DE400005EFDB66530C3942F3D6EE5B8EF767D7EE
+:10DE500006D87DD8D124E005BDDE3B3C18FF04E1A7
+:10DE600001764F1AC0A31DF96513FF5E2CAB5170EC
+:10DE7000819E1F1AC5EE0D89B4B0F3EB211611D7A0
+:10DE800039C4C2CE59E2F7BD2582BF9575BF01FBEB
+:10DE9000C74399A6DEFFFDBCBFA489AF2BF854E8A9
+:10DEA000894AD228B87FE44C8C3BD1A2A19FD8A844
+:10DEB00014D578CA7B8F7888F30EAA47AFD83DFF78
+:10DEC0002ED0AB947EBE00FC04FB8D9623006E4AE0
+:10DED0007FA0CF70F8A1EF0D87F9601EB017B6ECE8
+:10DEE0005E22E23D1A7DC46B26DC1B49FB6746912E
+:10DEF000AAADF4FDCC685A423D8ED713797D202B14
+:10DF0000533F711A04FA7C3D8FBB4EB6F0FC31C909
+:10DF10003EEA86D15067765C565224EA05856FE169
+:10DF20000E0838B796F8F9754A20C5007853F858A6
+:10DF30000A18FC56AAB452248701F218DEF1D07DEB
+:10DF40004BBDCB9DAB2F65DF71EA9FCFE4EBF9C1F1
+:10DF5000F6F5173DBEEF9E09F02D37B73D7203ADC4
+:10DF6000575C7A0ECF079747555C79A17B2FF4EB6E
+:10DF70007FE7FCDB5140874DDF98C27E0F55C3E140
+:10DF8000D6E229C0F732F9BD2E2451C93356E5B186
+:10DF9000421BB7CB109529F81CEDACFF401108F8D7
+:10DFA000F44AB1F07E54329E1F4ED1E5ADFE879FFC
+:10DFB000C5F932C130002571C92836CF37CC4E3271
+:10DFC000D3FFE09C691A3F177B4772AFB0D2F1DEF6
+:10DFD00021EC7C3533AEAA19EAC4C4C6CF26DAFBDD
+:10DFE0000A32136BA7C6C2B8D1C918DFCA35EBDA3B
+:10DFF00053BD12C869929A8C7989D388CA3E637AD4
+:10E0000003EDEE08BA2E90E3D78C2C744EE5EDE7C5
+:10E01000E8FF434DE4F6992A7FE32AC75CE7548D75
+:10E02000FD528BF701FDE99FE2EDE1F22C3EE3FCAE
+:10E03000DFE2C977C2F9B31E9E390EE17EABA3279A
+:10E04000DCF570D4C35D81AB1E8ED99F38A7C68620
+:10E0500081931E2ED348ED48D0630ADCF57079C752
+:10E06000CCE8E29D3413DEABF88EC4E0F80E352325
+:10E07000A11EA49B6811EF01CE8CE2F53747B0BA20
+:10E0800082EFA864C4B71EAE7A3866C6F1F7E358CB
+:10E09000FFBD002F09E502E247A19BCCD4AADD31E8
+:10E0A0002A7A50ECEB691C2ED4BE46FB3937DE8A47
+:10E0B0007126B0AFA72584E0965BCED6953BDCF207
+:10E0C0003CF8A9F475BCBF720AE13FFF143C2FCAAB
+:10E0D000E45505CE53BED1DAC9D39AA69F8238C380
+:10E0E0005093FB7EA0CF801083E77514EE477470C9
+:10E0F000D7BE67D7D6F570F803FC31B127BC143A08
+:10E10000FBC0C2E34E03C820B097C7BC96110DF206
+:10E110009B34C5868D4B5C71383F380EA757A4637E
+:10E1200081B883CFEDA93F428EEDA35A5225C73661
+:10E130008BEED396F89E724CC1D3648E87C9C4BB54
+:10E140000BE24B9389F445D01F480EEDBF5BD9E736
+:10E15000403210F67983C5C1E43FDF6770DFD4BC7D
+:10E1600084F9B3F8FC59660B7E5F4302524710CE28
+:10E170002978DF91D7181B5A8792BF4F86541166B2
+:10E18000CFCDC37BAE295CC87751A17598AC828492
+:10E19000F7FDF0759CA9337B218FAD5B7447819DA2
+:10E1A000D721EC1B83FB93FC2340FFE9DBCF35EE4B
+:10E1B000AE8076DAAF08FBF1F52F1659FC21B0C31B
+:10E1C000E47B3EB9773B95B235EA09857EB3E0FB47
+:10E1D000D4CB81DEFD0361DD5340D5D172E759F622
+:10E1E0001D437663BA04F3ECE96679FF39C42581EF
+:10E1F0007DABA7DFEF4BA7A178456008F8298A5DC2
+:10E2000036D5EA1E69A5CF57F3EF669BCE8E18056B
+:10E2100078F9C1F474404B4F0A1D51BA1A0FF0EC53
+:10E22000CAF8FC6930C7DFCD3897007A51B1DF43B7
+:10E23000768A6B02ACA7373B7E89D53DC57A013B18
+:10E240005EB1672EE68790DDD441A674741BC7CB00
+:10E250003C73ABCCEECD0F60FEFDEA48E55E3B477C
+:10E2600024D891B7AD4ED95407E786D52CFE7E6BE6
+:10E2700095ACF183DD90DD86EFB3FB666F5FA66D35
+:10E28000FF4C60FE7EA157FB9C581234F7EDF69CC4
+:10E29000D7E035C0BCC323313F413FAF7E7FFA7921
+:10E2A000F5F3ADE67ED56A63ED48A7CA2E596065E1
+:10E2B000F650F7AAC7EBE0CABADEE0E7360F48939C
+:10E2C00054F7ABB5AD8E2C08776F8C329E02EF7988
+:10E2D000C4CFE20055F2DFC3DD839BE566F181DE4A
+:10E2E000E61D16988A76A0E149BF08F6FCB0004109
+:10E2F000FB3B2BE0322CD0F801CC4FEEE107C0BD48
+:10E3000026B45ED6B08BF901F5D5E84F94517F0263
+:10E31000F4CC7A389B1EC0179486FE41D0DF85FC72
+:10E32000A92CB8CF92FBC312A597D45AD67FA3F5D8
+:10E330005DE36A09FC5577924C2963E3C3EFD798F4
+:10E34000A95F55934C2208F5AB5E78F8FDE96BC0E8
+:10E350005F8E7509707F28ADD758FAF7DDBFDEF8FC
+:10E36000F0FE1AB86F94FA65EBAC2A7FB737FE78E7
+:10E37000048C910BF047BA3D7F23F0A112AF688A5D
+:10E38000E07C1F11A4BB6880974227572F9B8F7E8C
+:10E3900045C425E787409E5816C7FF162B8FC346F6
+:10E3A000B1F79F12DD5B90BFDF3A3F02E2CBEF8C0B
+:10E3B0003C8AFE5C9395C5E7F7794AD07E52F0B966
+:10E3C000CB2A703FC93F10F8EDDAF1CD71E09764C8
+:10E3D000C902DE43DA24FB9E4CCF007934DBBE82D7
+:10E3E0006E296BA211BF136B8AF00FBC5B65A7355A
+:10E3F000F1FB4C9BCEEE1DA8CE631E66CDDD6545C0
+:10E40000FAF38B307E56C6EEC3A0EF7BD32F21FDEF
+:10E41000E112407F90F3FB13F0FCA8618F0DE24204
+:10E420001DFC7E82330DCD09F36959BEE52F36F010
+:10E43000D7DEE7703823B5E23D4A65DB44BCFF8395
+:10E44000CE9B700BC4A71B1664B2EFF7D877678A10
+:10E45000FE4CFF67F3C07C1634C4EFC8147B72B265
+:10E46000D9EB83F535558B182F9EACBB376C0ABFA3
+:10E47000374C6F5F9EB42A71E904CC875A6A67F300
+:10E48000F4C64F59DFC4129F8ADFB224BF08EBCF16
+:10E49000FA2681C01597675A529EC8033F9EC8CE80
+:10E4A000E130AC4476A3FDCACF9FE86F37DC43BEB2
+:10E4B0009357DE6C3837EB4A2466FBFD970960778B
+:10E4C000B9FBB1E022D3078A7D37E51B6D7C556F20
+:10E4D000E7E6348DBD7F204178B37FA722C0EE559B
+:10E4E000EB61FF06A687B57B09790CE190BE2DF59F
+:10E4F0001AB84729FD8F063BCCDB027C110FF83C94
+:10E5000087F7FC5410FF8DD05ED120DAFDB07E92EB
+:10E510007119F09562372870693CDF6C1E43D79102
+:10E5200075D6605F4E877833F005FACFE3FEBC2FD7
+:10E530000EF4575340C27382ACB3BBA316A8E46079
+:10E54000D379033E7FF3FC5BDAE781D8CBE0BD2DC6
+:10E5500006E617EFDEFBF728904B6F9EEFC6F182C1
+:10E5600076434FBB18E1916B15837167B55D4CC461
+:10E57000AC0390B7352D9AAA31A177BB37FB137244
+:10E58000BF95F4B41F72C01E11C3D8111CCE743EC7
+:10E5900009F8486F575C6EE3F1E6C1241DEEA36CE9
+:10E5A0003C1FB718BF1F6E8AB22F477DCCECA5AEBB
+:10E5B000DDA71FBF069EEF13D9FD11E745E4A7B7FE
+:10E5C000762E1EDAA6E25B2A39114F5FF53FDBF9A2
+:10E5D00006EDFFD59E481647979C97A9BF7708F58B
+:10E5E000F77178F907B0F338EF00B8D7E907DB2FF8
+:10E5F0001D3DFCFA3C1BDAC381E9A01E46AC6B371B
+:10E6000002FE5BACF9D7D990DFEAA3002E5E92330D
+:10E61000904C80F37A92037415A82676F027B6B54D
+:10E62000180C80978C8DC998A7B3899F572EAAAFD5
+:10E630003526ABE862113FEF3A297B87C4AA9E1FBB
+:10E64000B031F972724FE96F304FE34313191EC6B0
+:10E65000DE6CB0317DFB8AD17BCD66E877C480DF8C
+:10E660000DEDDEFBFA5EB8CF78D161C75888FF3D6B
+:10E67000627360BFC67D9B6A20CFB7F113D052543E
+:10E68000AF6C28140D74DE378883C5EF0E18D01FC9
+:10E690000FC63D892B0EF6F9105FCF1B2D06CDF965
+:10E6A000D81BFCDEDD7B6D32B62FB18988C7AD2D5E
+:10E6B0003971A0375AACEEBB6DA02F8EB5D5C01204
+:10E6C00094789F62AF4D3CB0F59AD1F4CF891D0686
+:10E6D0003BA0DB71E07911F6EB3849488C407AD8E1
+:10E6E0006F743C8F7ABC373AD878741D6F01BF2A9B
+:10E6F000F0A79AFFA1345A7FA3558A85FC2E05FE08
+:10E70000CA3E94F91DF5C4B5DE82ACE4DA7A81B86C
+:10E71000B3925F3ACE4E947F2F01E9D268733D6A7F
+:10E7200063F60EDAD727F730BBE815AE474952E15A
+:10E7300050809F82A77A1B8B332AEBE96DFEDFDBCB
+:10E74000989E54CAEF4BD79B648717E9661BCB0F83
+:10E750007778FDE654C8236B4CC57FCF499567FB9E
+:10E760007BA4E793DA7B051BDB0C06F80EAC628713
+:10E770001083E66D1FEDEB209D49F5487F8D8709DD
+:10E78000F27169DD9D2CEE48E50DBF7F0DCFD18183
+:10E790007FF8797A7F8196139BD6AF1888F0F5DBE6
+:10E7A00080AF4270A27C036555AD11E875D1525619
+:10E7B00016F373E9456BDDC89F45EB587EE11E5BA0
+:10E7C00032AEE70CA75762881C00F9272E0E7F6532
+:10E7D000DD799C6E4F353CD10CF352FAFA13E0739D
+:10E7E00052E3634FC372157A3DB541C6714A22B5F3
+:10E7F000E7F6AD7CBC6D0718BD4FDC20E7C0FD5FC0
+:10E8000013BDC40E71EC37366C14417EBF01F49C0D
+:10E81000CCF81CF4EDC93D0F46FD02F45CBB814011
+:10E82000BCFC152329D9A2E28BDDEB5FD5F06F6923
+:10E830005DF53518976F8B1540CE2B7CABC0FD1561
+:10E84000A3F32AE4FFEB74FC3F95BD2F473BB0DFF9
+:10E85000139CFF9F9841F99F3E8AD91023C038AF7F
+:10E8600018C3DF07F7F50FA4BFA05C6DEB2157BFFE
+:10E870006672B5CD964AE7AFB8B61BE30CC1F57129
+:10E88000BA7962AA4237C902C0BF96627018C08BBB
+:10E89000C215E899DACDB7DF90865CD922E1390F4D
+:10E8A0003F47E2F91FCA77020ABF86E499C2B76EF2
+:10E8B0007334D8D553AB56805D1F97E745FA3C2596
+:10E8C000B887C6527D760AF8388C3C38C1E5C75700
+:10E8D000B2FB62F7EE0F007A2EA11E22EC87AC137A
+:10E8E000EC8017A5DDB18EDDC33A3C5AD09CBF2B1E
+:10E8F000F51F0CEF408FFB418747637C3A60843CF7
+:10E90000D5113EA6C7889083FC400C570F003E5B94
+:10E9100044F5D7CD2AFD754AAE453A55E0707934B5
+:10E92000935F5FC5B07DFF95D38515E285AA732FF0
+:10E93000EA904802E36751607C2EC2F8A7F64CBA11
+:10E940000AE9FDDAF0F46E07FF2A16FE3DA7F54846
+:10E950009F3133ECF81DCB1392332246631FF9B07D
+:10E96000DCBDF157E8D701FD02BFF746FF2540FFA8
+:10E97000240CDDFB28DDABF0A7D001A58B6BA255E5
+:10E98000F2414F17CA79A302975774E7954F47335F
+:10E9900079B080978E5EF26694FDFC603C9FEC81BE
+:10E9A000E7F90CCF21BE027C2BF2E16717E1AF3D06
+:10E9B000D1766CAFF97401E6A9D4F273AB7A3E9FBD
+:10E9C000B2EEA5D182E67C4B7FEE34CAE2BE2B5A72
+:10E9D000773EEA480BD1C7346ECF2ED968C273FF99
+:10E9E0002DD00278DBCDFEBD6CE53DBB440D4F0A5A
+:10E9F000EA15D14C8E2BF4E1586624C3A8FFF255DA
+:10EA000072E16EC8FFF959AB376F34DDC716A377D3
+:10EA1000F6B5E80738AF82F1AFCA33D8211F24C654
+:10EA2000651720DE81240A7CB88FCD332ED5791965
+:10EA3000FAC90EE73890070F737C29F855E0D09B90
+:10EA40009EEB0DAF7B387CE279BB5E8E1473FE9E2D
+:10EA5000C2FB5D5C8E7845E0271B712F1761FD5965
+:10EA60004CFE05E54816C173C9977572E4E59F5ED3
+:10EA70008EBCAC912313DAC2CA11FA0BCBFFF11B87
+:10EA800016A21D4B0E87B7637746333D1C0FFA93D2
+:10EA9000F68BF7B2F3DE8739DD528AC4BCC9DA0DD2
+:10EAA00026CC1357E4906D36C9817FAFD906FA168C
+:10EAB0007ACD761F9E0CE7C54946079C5F9F92035F
+:10EAC00088F753D401AF45FAC8C7FBC7C3C82302B0
+:10EAD000F112EF4783D0EF9C2636219F2C994650A8
+:10EAE0007FEEDE7805D255495E8A00745B5A1723A3
+:10EAF000407BEC54BB01E494B28F2B9619C8B071E3
+:10EB0000C80707D472E40A6F15FEBBCD43E3DC49A6
+:10EB1000720C21471F3DFB3375BCA88DD6D5F12261
+:10EB20005A7FE0FBC48B8E46071E8078D13F6CAEC7
+:10EB30007698779425FF28EAB7C42A91A8E4D6C529
+:10EB4000ECB71F4A2F953C2E455AA9344ED0C481AC
+:10EB50006FAB73601CF82B584FC580E34FC37078C0
+:10EB6000AF46587B9BADA31F970BE41382F8E89741
+:10EB70005F2542FC45913B067BACE22F0B9097A1B1
+:10EB8000F0DB7F031C7DB5D7008000000000000093
+:10EB90001F8B08000000000000FFCD7D097894D590
+:10EBA000D5F07DE79D2DCB2493C9427626ECBB039F
+:10EBB00009ABB14E086090040710448D380990B03D
+:10EBC000640391D2D6968120068A182BB554B10ED3
+:10EBD00014FA51451BB61ADBA013401A143456AD73
+:10EBE000D8AFA561911D8980FDD38AE53BE7DC7B29
+:10EBF00033F34E26026A9FE70F0FCFCD5DDE7BCF4A
+:10EC00003DFB3D77492D63793B22199B90B350ED35
+:10EC100006A9C9CC3C161B831F2F6343793E7A0893
+:10EC2000E659986B20636BF27579DE018C5DC79FA6
+:10EC30003BFD69A2153E8E676CFED630EB4933B5BD
+:10EC400067D7E17F795D8C265F599F643DD9C79F67
+:10EC50009F8FBF24C1FF334CCF12182B63E2A7E173
+:10EC6000CBDFFF7018B4C7DF55C6DE54DD89568090
+:10EC7000A7DCDC12D5DDCED833F9C713DC91D45232
+:10EC800087DF3D22C67871B9E3BDDE718C79DE5530
+:10EC9000D916C80F36193D4A34FCE264766B82E817
+:10ECA0000F7E9406C5671904F97F43552C6397FEC0
+:10ECB000ADA3F4C59FB8F232E0FB8A7A9D6339B404
+:10ECC000AB685018CB62CCD19579CD198CD58547DE
+:10ECD0000D62D05FCEBE48A701CA2F2966AF298337
+:10ECE000D100088741C23FA2357D1BD4573798D841
+:10ECF0006AC85ECA61AC19E1D53BA2D9003F7E0764
+:10ED00001D7EA60FCC00CA6B1D2E0B639BC278FF25
+:10ED10009BC2647B7B3483B4DB92D1EC04C0A7D765
+:10ED200033160DF481C48369F6926E03F499301F93
+:10ED30003DF318804ED9AD3E15F1D2ADD5AE6391FD
+:10ED4000FE71F4AD8CE6DB4D6FD73960FC3A81F78C
+:10ED50009D4D3B543DE073D898DA6A15D2D228F71E
+:10ED600058C4F3A8ECAA6A2C8FCDF7A86E689FA5AB
+:10ED700054EDB3005ED878E6D802E5CC07838F84E3
+:10ED8000FA16D61805D998232DCE28281F75C6D96E
+:10ED90003800E61DED620AF6C7D8321ABF5FA4CB71
+:10EDA00085FDB238A75200FD0CFB0723BCC87E7658
+:10EDB000368D56EC006F5CF318C51EC05F304DE217
+:10EDC000ABF5CCFE53ECD77348E740BADAEB987357
+:10EDD00023B4EFFA72BF312CCADFBED2AAD078B703
+:10EDE000BBDDB94646F379D80ADF8F9CEEDD6700BC
+:10EDF0007886CFF1EC33DA03E63397517F292D1E65
+:10EE00009A47D211770EA68B2D31D4CFA833BEC628
+:10EE100001D0AE4B15CC07CAD39A3F5410AF6955F9
+:10EE2000CD0AD27167D35E8237B5793F4F8111EA3F
+:10EE300020DD01725517308FC5161DCD63B145A178
+:10EE400074E5C599892EA87FC4EA5E6C19EA9FC74C
+:10EE5000CA1C776215F4BFBEA95BFB7C7B02BCB702
+:10EE6000C1678827D9DF72AB91FA69B2B87F84F3A2
+:10EE7000AB9CDE7200796F47D39FA3482E1AE288BD
+:10EE8000BE09878E133D129600CEA078FDA1850A9B
+:10EE900083AAF5854033A5239E27B8DD8E31998856
+:10EEA0006F809FF8C71A3109F8F2628CBB06C791D0
+:10EEB000ED2714D922505FB4E7C577CF2E658E5960
+:10EEC0003D00CFFB8B77B26E4877F712A47B7BBBFC
+:10EED000818F87213F318BB316FBBBA4B0E938CEBD
+:10EEE0004B9842F94B069E97F8FAAB95E3EB11EB82
+:10EEF000A4C596788E272BF0F14B61BC5DB01E7ACD
+:10EF0000D7CABFB30B7E61CD9C5F701EA8BF64BB28
+:10EF1000DDA2DFDB9DEE5C3DE793CD08E7C811DEA7
+:10EF20007DC8B7C3F33CFB90FFD398E0933CCE275A
+:10EF3000C1FCBECF6AA37E469D696588F72C85B962
+:10EF400002E92ED3D710AEA1C8DFA3897F401EB639
+:10EF5000E378C352AA54038012C7AC135877C6DEB5
+:10EF6000B6DAA95DE608E73EE437ABD345F27C208C
+:10EF7000C24AE52B33387FC0F77F40FC05CBD32E48
+:10EF800094A3017E398A437E8CECC88FBF13F0BCFA
+:10EF90002DE4A563FFEE3F61FF71CD3AA7029D0C02
+:10EFA0003F12E965D074F8A22A15E18F63C0FF0013
+:10EFB000A06D8E3507E52CA5CCA1205D9B225C873A
+:10EFC000ADD40F23BDB93247E7AD86EFE6463B89A6
+:10EFD0007EDFD83EEC676636CC6F1FC01EFC15E1A5
+:10EFE000037BB0B608F5F46FFF69443D6A97F2D72A
+:10EFF0003424A238803FAE48BDE0A7F771D20B4160
+:10F00000F40ED673C1F4F6EB05AD9E037C5DE0F41F
+:10F010007067229FC5352F52B97ED0EAB5CEE8D1B0
+:10F02000413F083A5C8A707E81F85C0C3288E37A52
+:10F0300046B33E58DE991D0E8B89A476FF453B1CD6
+:10F040001613DFD10EEBCCAD0715C04779836A5795
+:10F05000610AD58FD99C48FF17EB148709E5A441B5
+:10F06000257E78716538D94B09EF67BBA307B1DB03
+:10F070002015F2CFDCDDC98E56C688F1ED9087F100
+:10F080002F5979D6687527C504E893171BBE084326
+:10F090003CF74F64034EC6620BA7D60E830829F0D7
+:10F0A000BD097F5310AF836B5414AC69EE9D269558
+:10F0B000E8D61DFB1BCE5AFE9C0D70BDBC6DB4CEB8
+:10F0C0001DC837F55767EC05F82B23B85DBEB4F7BC
+:10F0D0005A2FE433597FF79262D27B3F072B1913E3
+:10F0E000A01FDFEE7382EB6156683DD51F87762A3D
+:10F0F000D723008551E63E7AF427D47087AAF527F6
+:10F100008839AA7B027E107F8DE184BFEA9E20773A
+:10F110001904E748EC7FBFC5C892A0FC0AC823B613
+:10F1200093707F03784707E2D10F6FAAF55484E00C
+:10F130000BD50F5F3B5D900ED0BF6AD1D33C2EB193
+:10F140007007D2B3CEE864487FCF51E11F08BA55AB
+:10F15000089EBBD430F4881BE6F7E29154077E7F0B
+:10F16000A9FE4A982E12FD46F7149C979AD61A8546
+:10F17000F6705FC395BE2D0348BF4DC5F22B874E79
+:10F18000D8DC03BED1FC6684A687767E95FAC89A41
+:10F1900040FF50617C7EC17CA43434FE4B1944F2A4
+:10F1A000C7501F7AD299B71AE6BD72A0E0A77B9923
+:10F1B0001DE53E98DE46ABAB2226406EFF15EDAA5C
+:10F1C00042B8709C942134CF85981F747866A6410C
+:10F1D00087F31BC3D06E4A7F0FFDEFB0217EFF4E39
+:10F1E000CEAF7DFE3DAF0D3AC468BE3FC67100F89C
+:10F1F000E53A80AF128CC1EA8CC079FB881EE562CB
+:10F200007EE5E6489F0AF361BB0C175AA41EE8D6B8
+:10F21000117EA04F0DC2E719ED38E246FAFE35D255
+:10F22000518DF8D1375BD15F85F9ACC67A36A2280B
+:10F2300011E7DF2FD2B905F5FC4BCB18F1F3A55739
+:10F240009877134C76FB7E1DF1CB46D68FF8BE9F88
+:10F25000EEF20C5724C9F33A843BABB956877AB720
+:10F26000A7D7AE437DDAB7B94EA7233E70FF2286FB
+:10F27000FCE49957F4005FFF6D55EA37E4076F68C7
+:10F280007EEF40AFCD81F49278CB167C908D7843A1
+:10F2900083D0AABFD062F6E30DE8C3526C1DFB63B6
+:10F2A000AC251DF1D4F8FAE95E2DD05FC51BA76728
+:10F2B000205E2AFE60222618F387BED1C8EF9FE5A4
+:10F2C00084F6672E2CAD72E8C19F7A25A61BD985DE
+:10F2D00032D66C443FA1BC6E81431FA0CFA5FF7600
+:10F2E000C8D09C8FFD1F1AAAB26580E72B8EE15D06
+:10F2F00058083BD1EE2FA1BF06B02F47D811CFAF92
+:10F30000674573FFD146F620B8FDA1A5731C637A4B
+:10F3100074DEDFA1C161D3BDF07D7E901F743486A1
+:10F32000DBB5B6186E8741213B11CE8BBFB7783D58
+:10F33000507471C847510CFDCC5D1F647A808F2ECC
+:10F34000B2E647FE8872763592D671F9833FCA5C81
+:10F3500066F1CBE51D23F8DCEF78ED70941DDAE75C
+:10F360006FDF17E709C0DF1D4C7FB59DAF33705CC1
+:10F3700046E3337D4B2FA407FBE3D9043BA4F9AF4D
+:10F38000BF15C7F9204187745E24F4DBEFB028C0B5
+:10F39000DFCE5F52417C24F3E56D66E68D0DC8EB50
+:10F3A0009B8DB8042E6F8B645E68B737C612477AA0
+:10F3B000269925A39EE9145F3789CFE07289CF4350
+:10F3C00083CFA6A35FF15927FE706F1B6FD7CEF7CF
+:10F3D0004BC14FD7FBF3EF7CA53EEC0AF15D848D6A
+:10F3E000D3E98A636417F4F7F28DBE1ED610EDE4FC
+:10F3F000FA32184F6F5F2B8DC07E7FDF66CA0B0518
+:10F4000097DEA6FB767ECA21802AC01FDCA6BA53EF
+:10F410006DC21F9C0CF98ABE57C6D1BA5AF28BD066
+:10F420007B77304F23CA6F307F487AF7B001DDFA1F
+:10F43000A372662948B78B3176CE37421EA47C046E
+:10F44000E331389D6064EE50EB80AF62245EC39878
+:10F4500007F4E1231B0D64DF0F5FFBF8DE4CE0F7E0
+:10F46000D31B0CD6E530E49C17F6A53E03F57306D6
+:10F470009BAC0AE44FDB7D3D50EE4B5F505DC80F07
+:10F48000A7373C923013D2F320BF650047E946030B
+:10F4900095CFD9F828959F15725DFA427C7FD49755
+:10F4A00087F7AF4E403ACEF9EA89694897ED466B47
+:10F4B000FFC190966D531C6302F03D6F739826BF99
+:10F4C0005DC7E6E03C245D99E26EAF47133FD5A6E9
+:10F4D000FB76711F9FD6DF04FF72AAA0E3C4293018
+:10F4E000EF8AA157C8AFDF77209CECC99B912AF91E
+:10F4F0008FBEC1FFEF9DDB209FFB95DE41BE9DA02F
+:10F50000F3584167B05CA4B74BCC3C9FFBBA9EFC60
+:10F51000CF5C8B4AF886F69163A1FE7BA2BD0FF407
+:10F520002CCA2153B3D78D847663A30D0CEDD0F78D
+:10F530007CF3F219D8C93BDBF4C75B02E6339AD5FA
+:10F54000F6417F38871982CA9D7A2CCF356BCBC79D
+:10F55000F6B8FB2CFA0F63ADDA72C9778FD8B4FA1C
+:10F5600062DF81733F9B00F32B39A492FF7C237DE4
+:10F57000FC2EC2AF473ABF5DB80DBE3B2CB072F84F
+:10F58000DAE91549C857231486F1ACD3D742CBE347
+:10F590001FA45E6640DF3E7EFA1638E6B6E751DC11
+:10F5A000EF19B1A03D8FF0DFBC1EFB7A3D759B8D3E
+:10F5B000C73382ED46B0DCFCB7EC46FEE0B7D23D87
+:10F5C000164A7F83E985ED5CEF06EB89603B21E11C
+:10F5D0000A86B7BC4DA7B10F5FA11E191A68278C08
+:10F5E0006427BEC3F570836D68C7F530F831842F8A
+:10F5F000CF303DADC3C1DF6AC4760322EDB139001F
+:10F60000D20A6BB708B27F16F77E5B401CAAFFB622
+:10F610005A1DEA8DF6F88C411BA791EBD577849D96
+:10F62000A813FA1CD6ABB4CEDF18EE4ED4E3B8C99B
+:10F6300046C7968C8EF8F948B4EFCCCF957EACBE19
+:10F6400086FBB18F585D9A3819EB93A889FBA25FAE
+:10F650008EF2EDD91B4EF3FC54710D4239D433E7D1
+:10F66000DF6D01F4A93670F883E1898FE576923178
+:10F6700017F907B27CF6E8D07A5C89D553FB9C6712
+:10F68000EF4F47FFEDD3C607D251BF7E1A14E7ED07
+:10F690004C1E9E16F2FAA4B02331222EF014CA1189
+:10F6A000E441DA9DDBE1FB554B5D24573F5D3A9D1C
+:10F6B000D267962EA1FA13B60C1ADF9AF367577722
+:10F6C000C0D3C9352AD989D94657AF18F8EEA459FD
+:10F6D00047F18513559179BB22B19CD17A72F6B36B
+:10F6E00013B67802E27E276C7AA24367F38C8FFD13
+:10F6F00066FABD9CB544A1BD6AE7D7231DECB52DC4
+:10F7000016E37FAC2501DB552ACDBDB6291DC7B751
+:10F7100032677C2CF29791F547B9A90BE7F628B828
+:10F720005D4A2CE7C3BFA11F0BFD7E8A762B849E0A
+:10F73000B10B3A2FB438EDB1A4EF22C95F27B881DD
+:10F740005FBE8C727647B8605DD613D3615D787CFE
+:10F750006EB1C52AF8C3A9F0758EAB5F6C88F85BF3
+:10F7600067F19E6038DE11780D8E03C954C681861C
+:10F77000C6F2F9BC6DB36AE24218FF0E15FFF979C3
+:10F780002CD7A31BC35B3C2ACAC3037C3DDE25DB0D
+:10F79000A3607C2B25BF3607E35F77C5F2B8A52DA4
+:10F7A000CF9D88EBF6E444A303E336372B8F03EABF
+:10F7B0009C7C5FC0AD2338D6377BC27A015C09CD13
+:10F7C000EE1C23A45371310DF8EDC2AA9621DDA0E1
+:10F7D0001D21236B7FB857918B6C689229F42840C8
+:10F7E0001A8672678C724F45BA0C9B55558D71FA0B
+:10F7F0009432BEFF70567177B5019F9C7D2B3CA45F
+:10F800003F5C22E8CF94D1C968FAB3361B08AEAC8E
+:10F81000CD3F9F817C9FB5F92EBD12A08796C71A58
+:10F8200068FE67DF9AD795E2169F9858CF107AEA5C
+:10F8300087825F1E1074D8690CCD7F8B45BB6FAC7F
+:10F84000CF5B405569F5F9E2D880385B45F965D260
+:10F85000E79363ED34CEF3FABA03C980CFE767319B
+:10F8600087078AE66DDD48F1D79DC6BAF1B8EFE4A7
+:10F87000A9D031A4FBFE037F38908C7EE42CFB6082
+:10F88000F423DABF3FF4D24A2C7F7E0E1B8CF84F54
+:10F89000F23EAD603CE69F61B584AF7F6E31B165ED
+:10F8A00018B77DBF6EFC0F21BFBE4CC750BF04CF41
+:10F8B0001B4632E81231F519742338FD510F4ABA4C
+:10F8C000030319911E926E88BFED90EEDFF21AC10C
+:10F8D0002FE19A2AE2DEF3B66E1F8F7C925C6653AC
+:10F8E000304E20E1BA913D7931F6DBD993EFD00E5D
+:10F8F000BF121B222E1DC20EEF880D618783ED2FD4
+:10F90000B3387763BB1BD9E1E182FF36C606ED7FD2
+:10F91000E07E5908BA0D8DED100FDF1F1B62FFE36B
+:10F9200046F1F0DEB172FF431B0F7FC9C8F56FAD22
+:10F930008D3D3C2984BC7413E3EBD6B51AD17EC649
+:10F94000352821F5D9628B51EE1F7E1C1BB05F124A
+:10F95000AC8F43E0F728B6EFBBCDB7175B0D89E955
+:10F960001181EE5BBFEBB0DE0D31CE29813FFB2272
+:10F9700046FBA6F62A46FA0AF25E1E14F42914374C
+:10F98000B0384F93DDBAC1BED59DD61CF283E43E9C
+:10F99000D554ABD64F8C8B93ED9C9F239C699DD8FF
+:10F9A000897F093CC1FCDB70DCB8454CB31F23F7F1
+:10F9B00061E2AA3C8A310BCD11A3F86AD758F7321D
+:10F9C00003B46B1DC91C9B201F5D68CD417D6A9BE4
+:10F9D000E368C4FD9A9517793C7EE502E65D4EFD2D
+:10F9E000F0F93277372FCA17D22D302E1011C7E118
+:10F9F0008888E3720676D21CC7E10A8F0BB0939217
+:10FA00001EBA753E95E8DA1ADA4E05D0D546DF778C
+:10FA100042D7EF502EED7137E71FF78CBB05BE19AB
+:10FA20001877737CF3144C4BECDF048F9789F30F3A
+:10FA30001E0FF82C2BEE26F8ECEA2DEE8F1E8850C8
+:10FA4000BE5DDCA5235E27C485D0776BF2757D484B
+:10FA50005FB3704728BB3A232EF2BF7D5E6486A059
+:10FA6000F72D9D1779F1272D46A4B3DCF790F0060A
+:10FA70009F1391E5150D4A26AE3F73F65DA375C041
+:10FA8000A5C67FD33AA0E3790F3EEE42E403806738
+:10FA9000AC3AA0CE07F277799B9156EA2AB3FF22BF
+:10FAA0001BE3F64D06E6B5537B33B6EFC778FB7E16
+:10FAB000DB563663DCAA1FD37BC47A54B9CEFDA8CB
+:10FAC0006894E37E4D2A5B8DF9ADBCBE8A9997613F
+:10FAD0005C3A7A848ED903F019E30C67F6007CC691
+:10FAE000E6D93479B94E9E2FC68D77256BBEEF329D
+:10FAF000BD9BA67D92BB9FA63E65CE104D3EAD6AD6
+:10FB000094A67D57B0CF81F90CCFDD9AF6DD6B2638
+:10FB10006BF23D6B1FD0B43FCDAA9ECDC6797A9CC7
+:10FB2000CD3D00CE5902CEDEEB8B35DFF5D7D50DBE
+:10FB3000F3A120F9141FEEFFCD166C324BC473FAFB
+:10FB40007AE769FA3DFF6A5E9302F89D5D6B3819AA
+:10FB5000189F217C007E4BEA15F61C8C5BBA5E5B1D
+:10FB60003FA7E1E9952990CEF56ACBE7E1BE9C82FB
+:10FB7000FCAD2DDFAD733D82EB9DED7122CE28E211
+:10FB80003DAC037F44D2B89737F07897EAE91DC4BB
+:10FB90001F5A3AB16FC92F76C12FA6442DBF84D901
+:10FBA000B5FC527A70E7301FEB88FF883E417CE459
+:10FBB000817F017897F895F8B738B47CF55DE19DC1
+:10FBC00031AF91DB0D6DF93FE2B4F1B57E91EEE31B
+:10FBD000A8B7AED42F5271BF8DE5F17DFB2BF55741
+:10FBE000071DB26BF6D73ADB4F3A1717185717FBBA
+:10FBF0004997703FF1367613FB89FBFE85F800D9F3
+:10FC0000771B801FD80887B97DFF30CCBF7F14AC2D
+:10FC100037650A76E3CB38B227FE7DD76AF87A5883
+:10FC2000F45F5C08AFDC8793E772E4F92116C9E75B
+:10FC300029FB013CA8F143F1FC9F2D02D7ADDBF776
+:10FC40002FA4F5963C3FC4C4B9BF107E3FE9EF3AFC
+:10FC5000FC3589FC81F0786ECF23316DF707C4F94C
+:10FC60002E69CF3BEB47EEB775962A7B55DA3F6C92
+:10FC700055C21D9B42D8935EF1DF72FD75A6431CF1
+:10FC8000BA577CE0FAEBD12B07D0AE00DEFB62B9AD
+:10FC9000C502F65AF1DBEB5F444411BFB61E54BDFA
+:10FCA000BDA1E0B2D91E6D033C368469ED884CAB32
+:10FCB000CCC903F4B158AF3DE727F71183DB676385
+:10FCC000FB80FD27F84EE38FAC1CC2FDB5EC786ECF
+:10FCD000DFBF88E4FEC11491AF0C5A1755D670BF30
+:10FCE0006C23F8E90D01FD4C89B750FBA511395380
+:10FCF000E2298EC0D7BB2B3314F227562A0AF921EA
+:10FD000067A24753FDB5B89CC9C43F629C29E8BBB4
+:10FD1000C1FFDA6E1C1EBB388F23FB37C7F3F6E634
+:10FD2000F8D1944E89B78AB8B3B51FF2476584936A
+:10FD3000FA35AAA1F7A5A6C7F379ADB530E9276AC8
+:10FD4000E2FEE384DEC438BF89FBA3F96313FC71D0
+:10FD50007EA6667F688C13F17D853E77A29EBA539E
+:10FD6000D0BDB378BFB38F753F6E27758CF7FB128C
+:10FD700043C6FB1DE328DE0F5FEA715EC1717FA4FD
+:10FD80004384CD2F3F8FC4B7DB8354D44FF54677E0
+:10FD900035AEBB5A7783FF0EC57DBC2DB41F30F046
+:10FDA000507707AEAF5666B0BD16E4B7658CA17F3D
+:10FDB0005FDFA25B1E06F56B3CCC8AF52337F0753E
+:10FDC0005BE97ABB03A7698075B065885F1FAC8B60
+:10FDD0008F21BCD7B74C6EC4FD8135F7321B9AA179
+:10FDE0005A569B1B85FED0061672DDF89490B30917
+:10FDF000397B55D417F1E8DF87A0D353824EA00F8B
+:10FE0000D6229D87B7BAAFF0FD38AE4F4825E2FA4B
+:10FE100074BFCE1B6A3D3F373A771DF2C1406FE891
+:10FE2000F5C35A0BE7B77511AEE7A8DD2E7EEEB528
+:10FE300054EADF593AA607BA4F11749DB2819FDF89
+:10FE400060D7AE5F57A59FC8A87F867AA5F45E8B62
+:10FE500017E343A50D191E82CBA5387AA2BE687898
+:10FE6000DF85F9D2AC2C2BC6239C7F65CAA93EE462
+:10FE70006232AEBFF4EC94D42764C7E368DF69B2A2
+:10FE8000E0B7B5163B3F470D288E00FC976E58B67D
+:10FE900017CFEF7CF46B46FB4B47D4D661D8D954CF
+:10FEA00040CE922198EA5921C52BF8FED5BDA21F5C
+:10FEB000CFBF615CB37FDCA90D07693E470CCC6303
+:10FEC000063EBAB4E73E3BFADB2BE3CD14C793FB07
+:10FED000B24755F7E36484F4AD1508DAFD0D115609
+:10FEE0008C7FFC43F05D46827B1FD2C7BD7C7C05C6
+:10FEF000DAC19665A674C4A37B79921A0770BAD743
+:10FF00002A34EFD1CB938C787E61E68AC1E3504FDF
+:10FF10000D61CE9518DF7928968594D3F3F17C9DF9
+:10FF2000585C6560C6689A8411E32F176B148ABF0A
+:10FF3000E0FE5B01D0678E985FF9AAF7A3883FECDB
+:10FF4000F06F181ECBE53F73AA4A491EC1CE6BE481
+:10FF5000A78CD51993A09F796B6039DB8DECFDF1EF
+:10FF60000EFE43C079EFF23A6D7D255BF3399D7F3C
+:10FF700061E0EF5BD02E68EB3F95F2E8600EA4AB3A
+:10FF80007BB1C58CE784460BBC14AD51ACA85F6651
+:10FF9000AE688CBF0FF2339B5407F2B4C40BEBE88E
+:10FFA000EFD3398FCB4D3D693D70D96EEF82EDDCDB
+:10FFB000515CFF2B7AF7702C7F28D63D1CD7F1AD12
+:10FFC0009F58189E9B39D606FE18C61ECD6C10C5CC
+:10FFD0001FAC6CD0A4003B5A64B02660BCDFC316D3
+:10FFE0002632BEB7650E9C77A5790DF98195E80795
+:10FFF000F2F9911FF8502C67D5D6D7153A9FC3EA6E
+:020000021000EC
+:100000000DE4079A851F78D65E9B00AE17733D6E90
+:1000100020392DDE16437E68F18A5C23F26FF1AE43
+:1000200018D243E0077ED863989F8EC756641E4857
+:10003000847E8BEB321CAA967E5AFFB8E698A45BAE
+:1000400047BF4F4BB793A1E806F4D294A72408FF0B
+:100050004ED08B3D164B7E47E182B77A9A019ECBFC
+:10006000556174EEA833FF83A5C6D1BE9E5C17E62A
+:1000700025B7AFDF68DFFCCA9AA144B7607AE5FD17
+:1000800067E670B427ECAF16867AECA1EEECE1C916
+:1000900050FEB0C2E5EBA1EAF17928A759095C6FDF
+:1000A000BEB714666864ECFDA566E6ECC5D8074BE0
+:1000B000AD94FF686922E53F5E6AA7F493A57D28A9
+:1000C0003D29E26852CE8001885F472570F91A9574
+:1000D00020E2DE6C5122AA8CBCFF7C305467C5A1A3
+:1000E000D2278C4D63EC1E272023C0DF997E6F043E
+:1000F00012B93DDF62B08E4B44FF719542FABED813
+:1001000075BBA63DF825463CFFCDFA64FACBE99CC9
+:1001100098DD3819F8F0FEFC584DFB6935299AFC3A
+:10012000E4043BCD7B525E774DF90385FD35F9A2A2
+:100130003640029E2F30DBF8FEAAD8B767CCC6D770
+:10014000EB56DEF66AD5F02EDF0778AF1E32507D13
+:10015000303D245D67ADD731378036733DCC0DFA25
+:100160003D593B93E4EAFC110BD9FD95DB32DF1DD1
+:1001700001F963DB0CB4BF7E6C45EC5ADC3F3EB644
+:100180002D3E8A41EA5EA9321FFAC17AAB9105E899
+:10019000B7DC15CBE8FC5691D7E440F92FDAEFF93C
+:1001A00095CCDBD11F4420513E3E54BD3E85E8E74F
+:1001B00024FCBE14E6DD02F933A0AFF1C8F8CC167A
+:1001C0000ED71985ADC0FCD9B0BFF5FA3EC071B1EC
+:1001D000A0B64487EB01F5503CE9CB1D2A43BE2D68
+:1001E0005C60A0FDBBB91FA91B31CF9421299CDE07
+:1001F0002A9D47642F99A87FD60A1C02ED16FDD6CA
+:10020000B489D6774CE4770FF4AE16FC897C74265B
+:10021000863963085885E03DF77EFC46ACF7E3D3AA
+:100220003B08E7FDA5DEB53201F8EB5C897710E904
+:10023000B5C7E249AE82F17ED2C8F59607E540F136
+:10024000EB4BBF9C2D273E9D69702438485F652588
+:10025000A1BE3AB9C640E79899DE193589D63F3B29
+:10026000888FE53827F5F67108DFC99A0C86FB966A
+:10027000C56B54F20790FF787B2FE7FFA755371B1C
+:100280000EFDD6286ED6A523DF3CB260389D639A5A
+:1002900021D641C17AE0339055772F7F7EDE1E7ED6
+:1002A000CE8665B5E8EF1D18388F157CBC44DEBFDF
+:1002B0003C0750D6ED4F47D1E5BEDCD43D1AEDF0FA
+:1002C000D90F55E2B3B3DD6A8725023D2FE8F60E5C
+:1002D000FB3EE4CF17784EE921FF54B87B6702AEAE
+:1002E00057746BD2956E783EF6C4DADBE1BB73AF20
+:1002F000181C24E64BE2497FCC7B696ED7C0F38E95
+:100300001DF5972F99EFBF389314C0E77C7BDD383C
+:10031000EB005C77BB841DE2F8B1E3E62AE0C5BAE6
+:100320004EC143C3ECC450CB6A3C773D13C4243068
+:100330004E7842EC8F1F107A45FA09115D787EA63F
+:100340008EF3377B5521BF0D7E34FABF529C4F94FC
+:100350007A5FEAEB32564BFBC14712F839C6B98ACD
+:1003600097DA55E0CE2EA8A8122B0F42976D35795B
+:10037000BD19D49735D00F48EE62E7FB43C6579EB0
+:1003800045B62D65CD7C7E41EDCE19BC25CD191D20
+:10039000ED4D8975E30A1BF56F7060FCA454C869C4
+:1003A00079ADE2F5F17990DD94F18AD9C26E06DB80
+:1003B000A70EF628C80ECD0EB2B3AC566B5701DEB1
+:1003C000481C47C21B0CA72BC24278980770A1BDDE
+:1003D0002D717B0F4C24B8150750B2033CA5CC35CA
+:1003E0002606E701F53E7B47F882E7D5015E31CF6F
+:1003F00060B84B1C9FFB70FF18CF8751BC29681E4B
+:10040000921EC1FE9AA44B8987E3B7A441217A7E4C
+:10041000DAEE07328A1B497E8105509DF67BD74470
+:10042000D467A5EB40FF66F8F947F2D33C56178531
+:10043000FC52C17C2B9350BE7C75D346A2DFBEE13B
+:100440007D23CA49A1CDD7531783285CFBD3BCB405
+:1004500080F544109E6F44D76F8A379C955EC6BD69
+:10046000004FB337ABCEB0419A76E21C9187E4607F
+:100470008EC763C4F8C61CB1EEBF119C957A7E6E20
+:10048000FC86F076E2277D5BB8F3BA68FD62BF9F19
+:10049000D5333A949E6AF7AF82ECFADF0C3C7E21AA
+:1004A000F5F155BD93E225502EFCAE2A2B8F9B070C
+:1004B000E9F1B42CD2E325C2AECB714EADDF49F1E8
+:1004C000B7D968F703CA3F5DB793E2FEC6576647E0
+:1004D000A1FF7D6AFDCCB578BEEBD4B69964E74B3D
+:1004E0009F9376DE6D0CF41F72D717BDF863E4DFBF
+:1004F000AD61149F2FD9EF16EB1ED0ABD0CEBE9EB0
+:10050000EB51B68EEBD552B48703C81EF6C6768B78
+:100510004BDCBD510E02CAC94E2E9EE9FEDD1EE81F
+:1005200077F1CB110E0FA1C2EAD391DF6EF5A13D99
+:100530002C5FF8F1513CE70EF6FFA31F48FB0FD9E3
+:100540008D7AF7922E286FC2EE97AB1BD3ADE827BA
+:10055000083BF15FC0BF3934FE8710FE8B11FF01ED
+:10056000FB20C76B389E6706E1FFC41A4E9795DBE8
+:10057000BA47E1FAF1784D77F2B38E6FEB49F89F05
+:10058000B51AF0CFE35F5A3FAB06F08FEB08C43FDC
+:10059000C05BBCDF2EF0EFE0F8AFE178676B783A34
+:1005A000AB039E3D748E61F1AF4D0EF41BCE84F90A
+:1005B000C89F3AB35D65D5017E98F483BE60B5BF30
+:1005C000427F4DE27F6EAFE641A87F0A9FFE531443
+:1005D000D261EE761EA4EF807FE6EC82FEB87FFC4F
+:1005E00076BFE9952EF1017ED34DD2A982B918D9F3
+:1005F000C5863F1DC17583E2844F6D788F46DCD779
+:10060000A8D7DED7C0331985368C2F38CC6684271F
+:1006100035F81E8A9B611CF99F3D3F9FB190E4BC59
+:100620005573BE6D22F319BAA0FF58A7D0FDC6F2CC
+:10063000453951390CE3D45504C7E92E8AE6FC78D4
+:10064000B9AA23FFB1CCC8FD48B93FF9AEF00FDE1F
+:10065000EDC2D725EF75B1D27797C218D9814B1665
+:10066000A317EF23C07A2A11C7F7EC3111DD8E22D0
+:100670004C807FD528E2366002914F1F649C4F1F4B
+:100680008C6CA23839AC545E40BBF8D0129383FC1A
+:10069000DAB8688AD73E20F4DD83912B5D681F1E8F
+:1006A0008A343A31857E3D7888CE301A8687F10DBE
+:1006B000C946BAAF53686E790597BE0F279E78D4A6
+:1006C0000CA0DE06EE37C655E0D75DD7633BD2C53A
+:1006D0004F1F6D9CA7323C74DCA355E04B713A2947
+:1006E0009E6382BEC3018E2B682FB1DC6EE5F19D47
+:1006F0000D40278B9FBEC1E5CCC3F703CAF05CE376
+:1007000028C6196404E15F932F33F2FAF0C4AF26D0
+:10071000ACCB66ECCFCC3E10E956863A04D7F74511
+:10072000D15E8C97DF83F1251BA67AE297C97AE622
+:10073000D1F1B42612CFCC8978D34481CFA92398A4
+:100740002F1AF0EE3BA88D77DDE7D3F97A037EEF21
+:10075000D1FB1A913F7566BBC10AE3B8F29421B888
+:100760002E295B7E73F0A6259AF3D7A5425EC7CFEC
+:1007700085B5FE80C7211E046145BCCDD0B3FDEA1E
+:1007800010CE0788974A9BDD43ED1628140F95710C
+:100790003649FFC1D07D201D1F14F0413F3551F86F
+:1007A000BD3134BDFA26CAF5731DADABE70BB99B5D
+:1007B0002FE56D9B56DEC627DAA9BD827E30E0EDBF
+:1007C0004191762617E344FFE312B95C64DDE278D9
+:1007D0002CB2359DCEB708792937F1FEE5F8F788B8
+:1007E000744CA28DFA95F000BF1EC77E74A00190D4
+:1007F0005F4FD656937F348705C4B533FCED245F35
+:1008000077CCB7EB11DD754C8DADB310F5CAF7C2DF
+:100810001CA8471F34D6F5AC8AECD84EEEDB14B2D8
+:100820006603233D29E261C2FE8C5523E97C40A189
+:10083000C2EF0F5ECAB17874D118A73110690B638B
+:10084000143A3FF137B17FF250F4E28928D785514D
+:10085000463DA633582BF5FB776BB7E8FB18DE3324
+:100860005631760E038FC877C2B8D5A877787E8DBB
+:10087000339BA24A227FC72127E0E1DE6B407FCA7B
+:100880007F2FDF09FD5F7A4BD4B33BE9FB4B8F0B26
+:100890003EF6E4F2FCCF657D1ECFAF92F5F93CFF4A
+:1008A000A4EC5FE49F0EAA5F1654FF4B9E5FBC3E14
+:1008B0003FDF837EEB68CED285A314D2537B84BE08
+:1008C000285CEE23FC16EAF6F27434F3E9B26EDC2F
+:1008D0006E53A26B0FDA1FD572D282F6F7D564275A
+:1008E000E59F4F702F4BC475D424C563447DFBA195
+:1008F00097ECC1C44ECE1FEDE9C2E3F89B92A0BFB6
+:10090000A17EFB05FDAC4E8CBFF57E1C491CAE8064
+:100910007E9EF926F0FCA7233C1BBE493FB392B54F
+:10092000FD487F484975BE86F36327E334E745E613
+:10093000FFC4118DF12786E74500F5F397D7A5672A
+:1009400042FFF35F7D3DBD04FD2561E72BDA74CCEA
+:1009500089F734DB18A5E71B3F31E27DB38A5D8D53
+:10096000C671D0AE12D2DC00B8CA049C60E7F49322
+:1009700003EC7383D01B8C3DCDF7375F3DAB477ADB
+:10098000CED7D59D7A0EEDF62825E43ECD66F1DD75
+:10099000D14ECE17EF157AE86A9AB311E7F96B8C4E
+:1009A00021403EB7BA93FB60491C5F85C2EECD1C67
+:1009B0006631DB01CF433FE4FB54251B3286603CAC
+:1009C000F8CD84D1EF247E6D3CB595C7531B783CA0
+:1009D000B5D0D6BC089437332695AD31DFC1D88465
+:1009E0005F48390391856FF34C325F9D3F269BC76B
+:1009F000BB307F76FD636B506E9AC2B91FFBD0F09F
+:100A000081E1A8175A3222745690E737E38B8C495C
+:100A100043B1FC8E71589E63B2F42A22FC32E28B01
+:100A200037E35DC7905FB03DC641DC465FFC7D307B
+:100A30000FF7DB2A9DA7750F8A7087DA77FA87C0D0
+:100A4000AB31C94A69139019FD1709871C1FFCF9BE
+:100A500045CDD0DFC9E5498357DB719F25C7903469
+:100A6000D43F7E4682FB72E0F82775AC172E296EC4
+:100A7000168E4B020E03EE5D03BE5DD92A7306ACE3
+:100A8000F3268F89D0E4EFCD8F65CEC038EDBD2938
+:100A90009AFCF4C2EE9AF60FCCEAAFA92F30356774
+:100AA0005505F8B19DFB491E82A7D26209477FEE2A
+:100AB000EF0D5FFCE541F4FF36AB0EF455E7EED9E0
+:100AC000F297DBA1D5653C4E45F1473BC5CBCEC97E
+:100AD000F3287AA73E705FE8226BA6F33E9DED03F4
+:100AE000C975EE7CEB7E3A77F65DEF03F54A12EBC3
+:100AF000DD216C08DAC3CB551F51BCAE2292CFEF7B
+:100B0000E2EBC78CB80F8AFB8AD781DFEFC20FD127
+:100B10003F6CF3503C3BB7FE18ED9B1D48E47ABA9E
+:100B20002275811EEF1D55428A76681CE8AB68E08D
+:100B300097E646367017EEBB6658B81FDE3699B199
+:100B400058E42B1EDF694A88A17BD7F36BF2A8BC5F
+:100B5000A22D9CFA7F4F6D1E47E7095F5368FFA1E6
+:100B600020E5A1E5787EB829DC33E01118B7E077FD
+:100B700077E521DE2A76F1F3B505EA9FB316405AF0
+:100B8000569B47DF17A8AC49017F61422EB7BF05CE
+:100B900068F321AF0EB3AC46BBAB1A7DBD9E473D9B
+:100BA00063B4909E896E7B80C6AF6C33D3F7F72415
+:100BB000717FD7D0C2E11ADBE6A272C90F5393BA94
+:100BC00069D60F86F8CD7A7C97C3D0C2A8FDDD6DBB
+:100BD000FD2895F37DBBCFAFE93EAE21FEEAB81408
+:100BE00098F7DB718A95DC90203D7CA56A78340B00
+:100BF000A1A7DAC769E3E7F44C6DFCDC5E618A7398
+:100C00007E12C031F1B1163DEE07B148B315F13592
+:100C100071C4607B49807CA97BEF37227D0CEBDEC1
+:100C200037A29D36419A1B505F2ECE3304EBE90567
+:100C300049524F2FA354DA1D767506F9A933AC82B9
+:100C40000185FCCC10FA547EDF4C6B1AA0E36E1EBB
+:100C5000C77F34C5BD02F545730E9BBE83F4667332
+:100C60003AEEC37C57F0039DCD0AF9892D741E75A9
+:100C7000E208BB0EE3FFAB045C528E6F348FC5A25B
+:100C8000FD7B2A5B82FDBE77E79DCD4EE8AFF14745
+:100C90009999680FE4B8CF25F17B29CCDA7A0DD782
+:100CA00083956F44D851DE0B703186FB9D7B4CB42D
+:100CB0004E8172DACFA87CC3B409EF895446C17A59
+:100CC00015C6CF7D33CC877CDCF866981EED46EFE9
+:100CD00074F77348CFDC377B8FC1F5A1B3C1A4672C
+:100CE000E4F7389F273DDB09BC37D25BC17C26E5A2
+:100CF000D35DC3E5A548F069B1903FB790A32B55EC
+:100D00005D480EAF3C0640E33EE963CAC05DE8279C
+:100D1000D82DF47E9394CB025C0F417941FF183AB1
+:100D2000FF2BFD8D60392C6BB352BFE56D7621EF43
+:100D300036CA4BB92B167263127EC62CC1E7BB5361
+:100D4000DCEF205E0AAA41EEA3681F3F0BE5C9CF86
+:100D500037462BF217F04D624980FC5437DECFD076
+:100D60003F31C5B9886F66411AE89FCC6EF74FAC2A
+:100D7000E31200FE892B327478DFA99D7FDBF9E650
+:100D8000E6F87F8F9097E2485F4FF4670D55610E4C
+:100D90003C877E398EEFF72C5CC5F1B8D0E0CA45B0
+:100DA000FF62E12F158A97A1DF817A69D8912A63C2
+:100DB000601CE5FEB641CC0E7898D2D683D23713AC
+:100DC000DC47110F456DD304BE067DA3FDC5A14EC2
+:100DD0001E4732784D8E8D19184772AB48E733693C
+:100DE000CCFA4CE07EDE7A1DC5C3E4BEA38C2B9901
+:100DF000F0BC7C801DFD425F9B4EEF3704C79972AB
+:100E0000B8DDBFB0D94076BFACF1CFC374507F2EF0
+:100E1000C3D905EDC9977A771BF2F5BCC9DE570D2A
+:100E2000909FFFE4CEA891763F3EEBF4BE9E6847CC
+:100E3000EB008F18EFAA5BA3E679B9BF13C1F7C91E
+:100E4000387F4B7E0EE6F3796DDD889FAE5499C8EE
+:100E50000E5D01BE65017648DA1DA9E7A5FD917C0E
+:100E60005DAEE7FAAB3C32DAEBC908B43B935C39D0
+:100E7000C8777DF8791ABFDDD9B47614CAC1A53810
+:100E80003AB728ED46B01CBCB6141CD35E1DED8EDF
+:100E9000D4EB52CF4BBB35FAE52F77FE15CD558AF3
+:100EA0007B4032E0EB6E3DB75F77EB2DC43F63E3F1
+:100EB00026E9916F6E5E8F1E137AF498468F5674F2
+:100EC00062070627DF9A1C7415EDF34CDC7F443D66
+:100ED0001FD8DFA329A3C7E03CC627733BFB5DC136
+:100EE000DD99FE1F9F7C6BFA7F58B288F7DD40FFCB
+:100EF000172673FD1FACEF9995BFA773694F5F2F3E
+:100F0000DA83A30CEC03DAC18608FB16610FC85E16
+:100F100084477BBFCE1E5C4D9B5988780A610F1EAB
+:100F20004AFE16F640F2A1941B2927522E82E5486C
+:100F3000CAC5849FC23A11E9F41EBF5750AEF76C80
+:100F4000A3FD467BC46094CF763F6E9742F2D6C134
+:100F50004E08F9F1CB8BD66E48B990F222E5A75C2A
+:100F6000C8C5EC20B9D8A7D63D330AF7CB92DD6BC4
+:100F700093E3FD7252B623D83E74CA57185964B32E
+:100F8000E3AA18F25539A4817C65EA441E9E49BE45
+:100F900035BF68D94DF2D36FFEFBFCF49B4EF8E9E8
+:100FA0007FBE0D3F75F4633FCEB2033C57B240DFC6
+:100FB00066F8F96DC23B8CFB0FDDF97A00D6970419
+:100FC0007793318DE23E13AEB32A8A2F0ABE947412
+:100FD00096FEC06C11773893E27A07E1C5F5C082BE
+:100FE0009BD37B4467535CB311D727B3210DF40324
+:100FF0003AF37F9B6F51EFBD7193743E96FC9DFB5E
+:101000008DC79243FB8DC7B1FC9BD2B5209789F861
+:10101000DE8F0B30DE38E1299167CB0A108FD34683
+:10102000C8FA9F3CE9EC81FA81C9B838C539DE536A
+:1010300045DEB3F4F018683FE119E68F9B43FDD815
+:10104000ECE8F6B888C2FCED95E71F3BBC86E8519A
+:10105000CBE5CCDDA2E7FB3F229F05794B407E44E8
+:10106000507E036F1FA56F6181E745909F94219C7F
+:10107000CEAE00FF0186DF7F05ED85556118D7A84C
+:101080008CDBF8D615D46BF50AED45B5E381D514A4
+:101090003853C5FBB9945F73D8093EC203BB78BE11
+:1010A0004F4AED931EBDE837E0DCBDA14E71D2B9C9
+:1010B00083118AB75B46477CF749D1DA27FCD16BAD
+:1010C000BF67781EEF56BE6FBFCFD68DBEF7996E45
+:1010D00061FCFBB2439F7FFE5E0AE7EF3159D121ED
+:1010E000EBC7A5A8BC1F1137A0F1A1684A5DE87B3A
+:1010F000B013C5B8CDB85F42F8DCF624E2B7D92802
+:10110000F1FDF293C8776319D3C4CF607CCADF9F27
+:10111000F272418D9E4FD71984AFAF9BEF8014A917
+:10112000BFFDF8F204D1CBF435F87684C0B75DFB8F
+:10113000BDEFEBE835ACC3F7826FE7483E766AF85F
+:101140003D5AEF22FE8C8E53ACE84757B8C2D6E02A
+:101150007AC12F9FBF27BE6C96FB031DE4EFB5023B
+:1011600094BF0A8947CFEB4FA2FCBA74EDEDB93CAE
+:10117000B6F33573F601BC52C80FBE7FE4F9FA2707
+:10118000312E097C41F594D707C01D2C8F7541F98C
+:10119000EC20F915F247FA03ED01E0A927EAB7B808
+:1011A00063467B009FFC4CD0E9A2B827DA3C9AFB4F
+:1011B00093CDDD78BA2385FB8FCF097C6E12ED9B32
+:1011C000C303F090AAE11F1FAE5B02E64D78BA3F61
+:1011D0004ECEFB93827CD063CD365EBF2DE5A32738
+:1011E0003DD9FE7C707FAFA67C528078F1F7FFF18D
+:1011F00061F423EE1778DB9172E4B02752D039C145
+:10120000FF4E21F007BD63518EFCA174E48F1F7661
+:10121000E44F4FD0F7F44E7767DF7B3A7EEF0CFA5E
+:101220009EE13DEA9BFF5ED02D3F88AE7941741D63
+:1012300013942F9479AF46FF4ABD5C5CFFF4E30939
+:101240007118DF54E838BF9F9F4F93BD996F95FC8D
+:101250007BE630F2AB9F9FCF129E27D709BA79CE9B
+:101260003D897A7812EAE151FEFC14D443943F5F41
+:1012700080FB617E7B7581EAEFAB91ED2F92FD7A69
+:101280006085ECEF33CA4B3A32CF25B277F70BBD0E
+:10129000C33CADA4F7E735F0EF3F7DFEF3C35F2B12
+:1012A0000FB54178D91094F704B55F7703FBB622E8
+:1012B000E8FBC782EAD704E5D707E56BB4DF17CDB3
+:1012C00052480E8B46F0FDC960B90CE68F2F52DAFA
+:1012D000E363EDF65C8924FF4E235713AA79FEFAE7
+:1012E000F3FF29A8890CC8A7B0891EB2EF305AC0F5
+:1012F000FD41D0B91E15F8C1D089DEBCD899DEEC0D
+:10130000136CEF79FD3FF0D724DA2FD2F825FB5488
+:101310006DBE51957047BDBB2832605F955926E27E
+:10132000BABAF3FD9B8889635203FC224FF84467E5
+:10133000C03C65FB715F5D5771BCF8D4F0899B714F
+:101340007F68B4D8D7B4F114ECA58AF6BA52C46F4A
+:10135000C6E1395D6C17EEEBB930D00F6275BD7028
+:101360009E8D3F52F9BB50D5401FC05311B3D37966
+:10137000D39978EABE3BD447472FF90D7CB7EF47A6
+:10138000EA12B4D34797C4D239A645A9DCEFDC17DB
+:10139000DD356136E41B231E267DDBF8C4584AF791
+:1013A000AACE95AD56E83A357962645FAC8F263C9B
+:1013B0003936C44F5C06FC9D996A2738DC366B428F
+:1013C0003DFADBAB0DB45F082D7E45FCF3A469301C
+:1013D000AEB78B96F5A7FDB0E29F4F1A87F7B08A9C
+:1013E0001F37D03E498BCE4A7122F7EAB1742E6A7C
+:1013F000D60A917AEEA2F4CDFFFCBA1AEF69B5BE17
+:10140000A0D0FB0E775CAD7B67109E9BACE94EF7DE
+:101410002EDE8075009EFB3EBEBEB717CF219F0813
+:10142000ABA273A4D09EEE8B955EB3BF3B310BDBBA
+:10143000ABD6E5D0FE1494A3FF7C6A95BA09EF41C0
+:10144000154559C2F1FCF6A9AF18C5754E3D6EA2FF
+:1014500077228E47BA67AC8FA3FBB8E8E9B3538A0B
+:101460003D4A013C4CDAD067626212969B047DFBD8
+:101470004415011E8A74EDFC43F6A42486E727A5D3
+:10148000F699B805E671EA97BDE97CD8C154E7E45E
+:1014900054C0D72FD29C5352E3115E6EB7DEFC0FBF
+:1014A000DF8FFCE385E204E4AF8752395FBFD1569A
+:1014B0009C10F8BE77C9453DF1C19B46FB227A27B7
+:1014C000303C4DC17536F0412CC6CD6789750BF0A7
+:1014D000F3929D21FCABE1A92AD1ABF1A7F1D94848
+:1014E0005F3F5F0F7F17F519AD37205FB121732D77
+:1014F000DAB993A625EC440FD67EFE91ED0B233C82
+:1015000019B68579C332307EEA1C87FCCD12EB7A9E
+:101510004DB604C8A168FF770F3FE7FB77688FEBF4
+:10152000BEBF7BFED712B89F21DB9746593CE85CD3
+:101530009CB658F4488FA3FAA5A7F03C5AC90B06ED
+:10154000B203252FC43FD68AFA07F806E36BC1F32E
+:10155000FA63AA81C7313A934BCF18AD5CB231130D
+:1015600071BE9DC965CD86DC899B233B97CB522BF1
+:10157000D74FE35EE0EF51960EB5E8717F73F40B41
+:101580006F6DA17B740BC286E0BD89D2174C44AF4E
+:10159000168BC563BD0DEF1358F431903E9BCAED19
+:1015A00069BD909F5C95E9CD4328A57B1272DFF061
+:1015B000EC92679EC5E397E79877DA70C0DF6527FE
+:1015C000E7D3CBBB548A3F06EF23961FDC69CC617F
+:1015D00037B18F7883FDC332D622DEDF0DFD7DF07B
+:1015E000FEE1ABA9C1FB8706BA4F5E2AF60F73373F
+:1015F000280477E9127ECF3F3796C78D4F2E05FA24
+:101600001B69DE1EEB103C0FCDED4E2953BC66F876
+:10161000F5AE0D0B288ED913F184716EF16EE2894F
+:1016200030473AAEF34B5E0823FC96FE6AEE5F7ECF
+:101630009985F7FA0AE202D7D5FB912F387E19DE99
+:101640001F94FD9C5EF6637AA731F745581FC37C53
+:101650004A63D8ABF76720BD92D2719F53B62B5D1A
+:10166000FEA35EBC1DACAF611D5DB44AE5EFC7ECE7
+:1016700036911D04594F6401F72C67AD38683472F8
+:101680003BC6128709FFDAEEBF9F761CEAF1EA6ECD
+:10169000A5B88726F127EF5115E9F8FB74853A853F
+:1016A000EE578126A37B499753B95F7B3A959F6795
+:1016B000284A77D0FD9CF2B526C7F20CDE4FFB7DA1
+:1016C0004F58DF95EB9A4B683FF3F7268AAB54AE41
+:1016D00008738645F1F3173B06D0F96ABD11F05146
+:1016E00066E7FAE2B2986FA57DD25D749F41CF8E16
+:1016F000E8A1BEDCC2F563790CE03D92338A6E1836
+:10170000BE67C7E8DC24F69B3428607C4594433FE1
+:10171000F6287FBF4D3A5683711B6CDF7710E2319C
+:1017200076DA7484EF1595E41990B47604FA7DAFF7
+:10173000A899B8DE2E5AB56F1CEADFF9DB07E38DF6
+:101740000956F4EA07643FE60BFAB7887367C59059
+:10175000C777B622D2B83CB9551E2F8A485334EF0A
+:1017600010C9FAF255061EBF073D8F8AA57CD9C75E
+:10177000D46FB9A53901F56FF96EC330D4D351696F
+:101780005C2E8B97A5651F01BE2A3644D3BB8365AB
+:101790009E0223E6CB6A15CAFBBF8B4F473E3DBF77
+:1017A000E2B528E49F1361BE9E68975A178439E812
+:1017B000DEA195C7EBCEAFE849F79566599B2DF8AA
+:1017C0009EC1AC45DD6DA8BF8F5A7D46AC3F5A9790
+:1017D000A1C3BCD36ACDC6BC537F1BE5CF8BF32D11
+:1017E000F4837CA5703A976DDB67C4BF4F3244CC5D
+:1017F000F7E22B1FF4C2F84F797A732FB42BC0078E
+:10180000BD5210CF2F2964972BB6F1F3EE920F2A19
+:10181000900F40EEE6093EA8D8F5DAF7511E2A905F
+:10182000FE433AF211F0F37E2ADFB1711CE3DFEFE1
+:10183000473E91760CF22B0C368CDFF17C661AA7B2
+:101840003F948FE1E59E01FC1C5DFB39048D1C7407
+:10185000465F571AB787C5CB4CA46F5D695C1E5AAB
+:1018600056ED8E42FA5D7C65DF01DC6729DF0156AB
+:10187000DA1E421E043E2A71FE51043FF9179538C4
+:10188000DF28FFFCDBF95EC86125E3F393F3ADD4F9
+:101890008BF9CB7AF1FD24C12F654CE06B576F2E8D
+:1018A0007742CE508EE9BD0E313FB74DFB0EE5F7C6
+:1018B000C5FCDC2265D6BA28C40FD217F50F3E103E
+:1018C0006994FA049A5CDCBE91CEF14B7A49F857E0
+:1018D000093840DF39636C7E3AB674F24E6495E0A5
+:1018E0009B638F7749AF07FC9DDF4ACF6C11BFEA3E
+:1018F00003C6937C23C7CB7D79D2DD386FE8DF87C1
+:10190000FDCB718F7A22F4D8CF51C6E543C22FE5C3
+:1019100032B7FAA1BB074761BB8B96EE0370DE9C22
+:101920008EABD2ACF4BD13FD05F8DE59AF50DCFA36
+:101930009858E71F7BFCB5A8E2017E7E7F427C279A
+:10194000F90C7F303E26E16DB2F1387030DC520F79
+:1019500049B8739FB8EF6E2C97F0E3BE51209F4AB1
+:101960003C4A7E95F7F582F996784EDA4FB573FECC
+:10197000AE4C3D46E7773A9407F727FCA213E25CAA
+:10198000796B3CE371FF1589FB35F78A188B0CB432
+:101990003FD28EC0CF1A7D80FD69BFA716E73C8B72
+:1019A00074BB90D68DFA3FC7EA8C39D06FD999E6CF
+:1019B00071F8CE9DF443EFB8EA53A3315EB58B9F27
+:1019C0007793FC5276613FC941B9B8FF54B4EA83BA
+:1019D00082E1C8EFBF35D0BE4ED1E3638DE8DFCFE3
+:1019E000DD327318A201EF41A05E3FBB796826BFCC
+:1019F00059604D9886F721363F33ED01289F55AF4A
+:101A0000D2BB0DD80FCA6FD1A399145F3D11D65226
+:101A1000300AFDF81FA856F4E36FDF32F4316C7F13
+:101A2000BBA56B0C3DB6B13996F24E7D34D907E9B2
+:101A3000F7CA7380D5E2DEC75F84DE3FDC9E2AE210
+:101A4000FC5F752FDC8F6FDD1846EFAC141AED7557
+:101A50003E1C6F4F175A67541AF1EA23DD5B25BF0E
+:101A60006C8E9199938650B93909CA0F1A9A1F45FD
+:101A70003B72F051CB607C3F92A9D78615737F9A59
+:101A8000EF3BC66ADF2D91707C24C60FEE4F7EDFE0
+:101A900084EB081BDD4FA4EFCFAEF8ED34B48367C1
+:101AA000B7F6B4E1BC4FEF09A3FB03A70DDA77CF7C
+:101AB0006EF5DE57F07D29796FF5749AD68F93FC19
+:101AC0007EC37B377FD39E83BCD1B9A50B4B19DD79
+:101AD000FB7E398DD1F76322BEDA89E7084B6A4D68
+:101AE00056BC077312F91EF7B376ABFCFEA599CB73
+:101AF000C1C9DD9974BFB7E46F3C5F52A778F13E6E
+:101B0000F2FEA79FA0F30AB3C1CFC4AB09EDFEF369
+:101B1000BAA7A7A1385C76B857E27DFECB5BF9F98E
+:101B20008A0EEF321CDC7920C9DEB9DFFC5DFBCB0D
+:101B3000320E119FAEBDCF2FF12CD74F6F023F8CCD
+:101B400018E2C7DB674BE790BF7C61A99BD24BCA09
+:101B5000B1B5B7231F5BA2E9BEC01FEB9F51F1BD1A
+:101B6000A8F25D83AFE13A78546434BD93F2D9D2E0
+:101B700025B48F7A616915A592DE320E77C7AE461D
+:101B8000FAEEB3FACC06BC9FFB4664B4B003B69041
+:101B900074EDECDEB19CD7B91F70FA4AB8CF6D9DD9
+:101BA0001985F36A7C3EB66124D23522DA8A7E5FDB
+:101BB000A93847726A3DF7ABCF98A37F930FF43DE6
+:101BC000B3614A02BE3737BBF1DE69585EB247B136
+:101BD000E27AC0B1675214AEDB3ED5B744E1FDA84E
+:101BE0004FD7CB7B555EFA3B54A3F2D8146C3FCA57
+:101BF000A767F60CBE758D7C32F2829EEEBF9E8783
+:101C0000728A935C0BA73809FCC4E2B991D9AFF38F
+:101C1000F84AFB3A57ACF36E17F37E34DD26F73102
+:101C2000A83C77042F3FBD61E744ECEFEC668315D9
+:101C3000E1FE6CB381FA9F07EB331DC07B662B5F1F
+:101C4000F7601ED7CB67B7F2F5CDBC3ABEBE295FB1
+:101C50006070F2FBA25A7ECC0D6847EFFB74F25E17
+:101C6000C83C279FDF3CB09738DF60BE8D6175743C
+:101C70008FEC9B9E170DE6DBF9925F857E68E7D7B8
+:101C8000CEF844E013E51DF955F2C3BCF57CDFDE68
+:101C900056373807F94EF247F03B59D546C6DF575D
+:101CA000D485D37BB89322ED06B40F53E25AC620F5
+:101CB0005A3E4EE77E809AAB73E2BD37566D0AF905
+:101CC000CECE8A74EE57457465C4EFDE742B3FCFD9
+:101CD00029EE7FC914269286767B5284ED0B3B3425
+:101CE000793AFDAE7BF4C0CF936EB73DDADDC1D853
+:101CF0002FD30BEED1C37C2665DA767783FCF3BF56
+:101D00009AC0F3B7D9861A20BF4C9978CF18C8D794
+:101D1000A73B9F4A0F18E7EC962E69383F28FF191A
+:101D200096D7C5BB7F8E69A5B80F7649691DB424C7
+:101D3000C3DFFEFD3D96A37FB4FBF32D0696EE18A0
+:101D40008079097FE8B425DDF9ABF4F88EE5C58C20
+:101D50003D4EE7F53CFC1E0EFCB8CC09784F8AF3EB
+:101D60005BB1BC975313742FC7C1EF9FC9FB52F2ED
+:101D70003E545FFF7DB20DB7729FEC9281FF1D2A2A
+:101D8000C5A9BD0FA634FC89DEF9A9F6B09630A22C
+:101D900083F69E4D39BE53771BDD0BA2FB874C6F3C
+:101DA000277D3357FA3B68AC87F9DF296089FCFC53
+:101DB000C1A3821F4F2F653D7A80E89F7FB739CA44
+:101DC0000E705C98E8EB85FA2032DCFD27C4D7E979
+:101DD0000DD5A90BE3F01EAAC9910FEDCF78F97DBF
+:101DE000CE32E1B7B2CDF1422FA8BE3BA15D534642
+:101DF000DF4D6887DE177C7521C397FE23D42B192E
+:101E00007C9D04EDE83C5DDEF2BBE2B1DD85ED4F8B
+:101E1000F4980D709B0006BCA7351EFA1C61A3F751
+:101E2000AA984AFBCF5EFE7E929E79A26CF8EED510
+:101E300033E9E23E11DD13947492F8EF4017181A5B
+:101E4000FD599D991910EEBE6C03FDFD2F491FF938
+:101E5000CEE2C2DD3CFE427724451EE348A7CDE238
+:101E6000EF9F75B08B6F91BF0A62E9D1E89F0D3388
+:101E700043DBC9111B8DD8F5776D2FFF9D2EFC928A
+:101E8000C16C70E03B92A5A2CD58B5D08EEF5B2D12
+:101E90008C37D37B250B5FE84EFCC196FC9005B6D2
+:101EA000631B62895F5666A884FFB9F58CDE1D2A24
+:101EB000A84FA6F394F9F5364AA3DA12A9FCEC6F01
+:101EC000DEC9E27A89D3A7E07FBA8CA6734BFFD331
+:101ED0009B52D6D97BA79166BACFBBF020B76B0BCC
+:101EE000A7CABFC7C2EFAFBB0438AEC81A8A0BB9C6
+:101EF0003ADC53E7EF57BAF0BE007EE734507D6717
+:101F0000EF574AFC9A04DD82DFB39C7A303391DECE
+:101F10007F14EF594E17ED9AC5BDB3CEDEB5BC4F59
+:101F2000B47B226A5C13F2DD746769C8772DF59E75
+:101F30003007FACF86D4487A47E13E37F8979AF5CA
+:101F40004C8B1EF1302D9BBF733975BAB6DE90FDF8
+:101F500039E97343768777920CA88F4D2E6DFBEC91
+:101F6000AEC20EF5657DBFF65DD15423D94F3DBE9F
+:101F70003B0BF969E25D51F40FD1FFBFECB410FFE8
+:101F80009BC43BB8CD2C2B11F5C2ADBE27FBFFDBAC
+:101F9000FBB1C1EFC406BF03DB7FEB424D7E60DDCA
+:101FA0000F35ED6FAB5FAEA91FEC5BADA9CF6CFA3F
+:101FB00099263FB4F9394DFBE1473669EA47B6BC8B
+:101FC000A4A9BFFDCC0E4DFE8ED63F68DADFD9B690
+:101FD0005793CF61EF68DAE79A3FD0E4C75AFF57CB
+:101FE000D3FEAEC4139AFAF1F6F39AFA097DAE68FD
+:101FF000F2058E2F35ED3F37BA577745BF22EA0CF1
+:10200000F1AD3A4361F844F9E5A62966D4076BBA05
+:102010000A7D24F86FB9B0D3AC07A37BAC63D56C51
+:102020001FF15F3DFFBBA0C1764F7FDEE5C4F81F07
+:102030007B8DDF6B8B067F521F307E8CD3CC02FFF3
+:10204000EE5D6C9E55938F77256ADA77996ED7D4BB
+:1020500027B9FB68EA53E63834F9B4AA119AF65D59
+:10206000973835F90C4F9EA67DF71A9726DFB37681
+:10207000BAA67DEFF56E4D7D5FEF1C4D7DFFAD5532
+:102080009AFCC0BA259AF6B7D57B34F5837D359A8C
+:10209000FACCA65A4D7E68F37A4DFBE147BC9AFA1A
+:1020A000912D5B35F5B79FA9D3E4EF68ADD7B4BFE9
+:1020B000B3CDA7C9E7B0839AF6B9E6F735F9B1D63B
+:1020C0004F34EDEF4A3CA6A91F6F3FABA9977ECED8
+:1020D000843E9F6BCB85DF53E0F897E6FBF6F76E07
+:1020E0007728741FEA5CD76EF27DC5963015FD2403
+:1020F00017C5996C781011F515DE27B7F1F33985FE
+:1021000014AF8A237F884C941DCF0B81DF1085ABE1
+:10211000B68C0CF4AB23FCFE5BEAF5CC9BF7DFDA64
+:1021200084FFDCD5EEBE88F231AF6EFB387A9F9823
+:102130007956221CF2FDBF7783DE6D95E978F3199D
+:10214000A60FF0170F86D5A60EF99A38C178F305B9
+:1021500086EFC1B6F72BE222F8C7BD1706F4BF160B
+:10216000D617F8F7236B979AE96FC7FF6CA995F21A
+:10217000EB962652FEFF003A29BF47008000000080
+:102180001F8B08000000000000FFED7D0B78544518
+:102190009670DDEEDB8F249DD07975779EDC3C490F
+:1021A00048089DF0D8003E3A216040C0E635044919
+:1021B000A4C1A84143BA81F84F7475BB311002B273
+:1021C000B391D11095C1860164199D092EA3D1093F
+:1021D0009AF09AE03A4C601CC5D91937A0A3E28E58
+:1021E000101EE3CFEE8FC37FCEA97B93BE9D0E382A
+:1021F000FE3AFFF73FFAFBB4385575AB4E559D7369
+:10220000EA3CAA2AAD5E898922636DDE1C4A9FF3EF
+:10221000DA9998C9D8366F31C1DBBD0E82FDDE7206
+:102220004A777A9D94BFCB5B41F01EAF8BD2BDDE67
+:102230001A4AF7793D54FE92B781E09F7A7D94B6B1
+:102240007B9B29FF156F0BC107BC6D04BFEAF553DB
+:10225000DAE1DD4BE91BDE762AEFF47610FCA6B757
+:102260008BE02E6F0FC187BCBD041FF19E26F8982E
+:10227000B78FD21EEF6794BEEDEDA7F277BC57097A
+:10228000BE8EBFDB19FC2ACD9FE431263097E67A5B
+:102290001EC2CCC92632F600FE4B82FFE24688CC35
+:1022A000C2D8FD8CFF3ED7B09A76139477FEF23FEA
+:1022B0008502C674A58C8D1F0F6962F6CEC634C622
+:1022C00026B075E64F7218D34057D76307FB094E07
+:1022D000191319D6C3DF752DFEDFC7583CFCBF9418
+:1022E000E5784C836953091442FBBE55827F771A07
+:1022F00055D7203EAB8D1CBF695A1395573E2CF81D
+:102300000D02635522F3E98B18FB7D5854011BC164
+:10231000D8258F2E47C47221DC0E8304F88F3A44EF
+:102320000E7E5D2C8EB1A59D861D9BD206F1AA84E2
+:10233000EF35F0FD2B561A0CAB643D3AC403F21D89
+:10234000DA18C69EB7B8A64B90FF608AC6A787F674
+:1023500099C99FED8C64EC2D8B6B06E65FF2DC7700
+:102360000C1B7FC06CCFC67E661BBAE21741FFFD17
+:10237000C7B5F69DD2F0F3E16E29676CDC0DCADFBC
+:102380003C97EC023CCAFFA275E1FC9FD04556F891
+:10239000F3012F49E0784A1A553ADBEA5A82F87C71
+:1023A00019E9B9470353F8E56DABF6AC812155AE99
+:1023B000CA1AE182EFEE822563198CCD65928E41B7
+:1023C000F97CE6389A064D2D642E8217311FA56FD1
+:1023D000C5BBAAB19DC5CC4FB06BB22135D4B88274
+:1023E000F172CB78B9657C94F471ABAB8EE3E520E8
+:1023F000BC4E4CBA231BC7A5E0F59655A27A73587C
+:10240000FF76C4EFCB83173F113286D2C7774017D0
+:1024100026681EEB313DAC73A38ED1F78D8F087EFD
+:10242000A46B852E2A9991B7FB18E40B817402F4F2
+:102430005184FCD29F3A3792E8E449091A7C7092A1
+:10244000D6A71F0BE3D4F8B3052DD1875E00FC1E81
+:102450008803FA481F9E0EEA9A210DE01FA0AF677D
+:10246000B0BDF3AFFF5D0ECE97FBCD4912CE57A3A3
+:1024700006D601E8D8F7B6D6BE5B92991460ED9403
+:10248000317EA46B26DAED73C7E07AB1A54EA8DFE2
+:10249000AD650DFBF387F6FB2AAE17B47FC2A62B02
+:1024A000F753BB9CCF95F29FE2FAC563CAEBAD5ED2
+:1024B000F569AD16F03F71E89C5E1A13621C0D6F52
+:1024C000E76606E0EFEE3833DD6142E4FAF2E74515
+:1024D0000EE69F94E944A11FAD3ED2B5C314881700
+:1024E000EF17E8F9E74437D140CF1944CF9FF8E020
+:1024F000D3390669C42248FB606ABA2075BD60D62C
+:1025000023DD2C67764AAB9993D20760F9917E9DC3
+:10251000BEA7F438EF0FB276CAAF2BBED782F47CD9
+:10252000BFC6958A702DEBA57C37EB2FB3C1FC2D70
+:102530006C5E7BD40658CF6F796A5A02CCEF3CFFB1
+:10254000B2A398CEDD257CE293883F7A10AF3EC1DE
+:10255000B33E11FABFFBA592F549903F47CBD78513
+:10256000FD2B5F17457E048F1BF8A1978FCB41E3AE
+:10257000D24695ABF8A1F209E610A09DFE8306FFB6
+:10258000CEB400FE287EE8DF93508E89FDF7E07A16
+:10259000BBDF34C4E07A3F08E21BC72938186B80E0
+:1025A000FE90D62A63882A88DE1F62E176ACF7B9EE
+:1025B0004CDF9FA730A2EFCF05E66040BF1774A69F
+:1025C0006601E55AAACB5604F8AC60BE2606E56E55
+:1025D000CD4B05384F2325D7A744D71FB53715A6B0
+:1025E000A1FCF7A70A28FFF719EC8D69AAFD845D05
+:1025F0008F4021E361389F3FC076C70EC54B283E10
+:10260000F69F421463063DF3198B88BFD944E4EB6F
+:10261000443DF157234E6D06F6E3943CA6A1ED9F91
+:1026200090F1EDF94A4B74EF83F1EC1642F5C3F7E4
+:102630002B43F8603F243F2C8CFAD1A7713E56FA09
+:1026400063A6BE6427D0756A844B978682C116C77D
+:10265000E58B99CB979EB44F33717DE64CDEA8C8CD
+:10266000656A8FDDC6E5D1099DE443F844499A1DAA
+:1026700024D7809CBDABF897A7118FBB8CA62E2DBD
+:10268000A4EC16DD9FFA947D307D70FFBD4BD97FA1
+:102690006FE1FBEF1C99B5EF12BBBAF17BC6EC3AC8
+:1026A000C42F97FD5E998F6DB8DF2AF271C87E0B3B
+:1026B00003EBC5F913252B8374B5C0C7BF3A25DCDE
+:1026C0008F7CC436E7D2F8F4B2FC0CFEDE5AC15857
+:1026D000A651C613FE4B70195966CE209C54635602
+:1026E000C1291E9BAAFEC80649559EE6CB51956797
+:1026F00034DB5570564BB1AAFEA836870ACEF59743
+:10270000ABEAE7ED75AAE031ED15AAFA633B5CAAE6
+:10271000F2C2AE1A55F9B81E8F0A9ED0DBA0AAFFEE
+:1027200077A77DAAF2497DCDAAF2299FB5A8E05BE3
+:10273000FBDB54F56FBFEA579597B07F56954F3541
+:10274000EE57C1D3CCAFABEABF80FB16F0CF1DB6BE
+:102750006E55FE0CE9B8EABB3B734EAAE017E47570
+:10276000F62D0E27BE682DE7FBD16CFB07AA765825
+:10277000E768BEFE613C6F7BCF1F0B514E6ED7F4F6
+:10278000A721DD4A5A7322F27166F1DC4340662CC0
+:10279000DBB1AA14C55B4EF95387301DEDDC5F8AAF
+:1027A0006C925F71F210A605AE8BA5D01CB3D74416
+:1027B0001FC6B4C85338D58AA834CC3D8CE944DF51
+:1027C000AAA928575F785C3F1AF9282A46A14F0723
+:1027D000D1677D8286F8B97EB1C98FF2C732C52430
+:1027E000329013961F5AD6B1024C8B9A316DF61A5D
+:1027F000995F0FFA809751BAC96B66FE6C2067AF7C
+:102800008DE0FA93F795A7433B23AB4433AA99E6AF
+:10281000518F2548D0BEF5E5969C5D76C6D6EDB0C5
+:10282000CFD7E542FF199EC53BA2014E638E05300E
+:102830007F1698233699B1253BDF76FAF287C29747
+:10284000339D4D2417C4F65CD4FF947637967E6E84
+:10285000D79821DFF74BE71198F7ADF1E1F41DC2EE
+:1028600025995FA75D470BB60BF99EF6107CFC4CD3
+:102870001ADF7F97A4737D0A8784EB66E5CBC6AC2D
+:10288000A0A78C80B9DC3AA9E10CEAF0A2D927A074
+:102890007C62D7E07B902B89582983E0DBC3014E13
+:1028A0004058626C7F96EBC7D8AFD5C5D8D900FA2F
+:1028B00049A851C35B619ECF660EE2A35BAAF18972
+:1028C0003006DD8F9D763BF4B3AD0AC60BF0563D66
+:1028D000D737947AA3348CF6F72FD3F87ECEAECDCB
+:1028E000B7A39EF4A53C9EE7BCFD8B3ECE447BEB9C
+:1028F0002AA589351EC105F2CD5AE9B4FBA09EAECA
+:1029000011E62384DEF28B3491BED71D7E4490A065
+:10291000DEA76912C189957E1A77520DB41B80BF5C
+:102920004DF40966C8B73DE613103F9BD96967F0BF
+:102930001D335A88FED7C83C616BF8CBA28F410F7C
+:10294000D3799D76ACA7BB13E8331F27D46366B851
+:102950004EC9E347B010EBA3A4863E0D73DC409F45
+:102960008F4A7DD443FBC5DD26290BE8FB85C5A630
+:102970008A1D21DAFB549E9F0D31EAFE2D5A3E1F1F
+:102980008ADCBE6CE6EBA8F0F19A68A692E36B5283
+:10299000C65B6F84AFB5CDC85C01F86E857ECCD0C8
+:1029A000BEE1AB55661C3FE8D04EEA4FE4F264C787
+:1029B0008F72C86E0A5EC721F408943FA208E9A38B
+:1029C000CFDF087C68A8D2DB516FB2FE4393807BD7
+:1029D00073226B1150BE5853CA7A44DCD74457AEA9
+:1029E00033843E7933BA54D64FD99F83D74B773D42
+:1029F000E3FD129CEF7FD531D4C7561F8F8F710531
+:102A0000D0534C3AA7CB62D6A245FE98CCDA29BD6A
+:102A100085F5527A1BEBA7D4C1CC22A6A5CC4E6972
+:102A20001973523A9D79282D672D94CE64ED94CE7A
+:102A300062BD94823D43A99399C9EE9A07FB37A6DC
+:102A40000B9893D2EF310FA599E99C7E2B580BC1BF
+:102A500077B3764A3B80EF243DFA018C9476829CD2
+:102A6000C3F44D9073987679252665A31F2087D2ED
+:102A7000235E3BA5C7BCC594F6781D54EF6D6F3936
+:102A8000A5EF789D949EF05650DAEB7551BD53DE5C
+:102A90001A4ADFF57A287DCFDB40E969AF8FD2DFB4
+:102AA000799B291DA5077EC6F9CDE92B447D3EF50E
+:102AB00023BD4302F9EC91E5D26187E699DCF1B8D8
+:102AC0006E1A66403A285B2320FD5973340E3FA4EA
+:102AD0009B72560BF742BAE104D7DF0CD648D20FEF
+:102AE000AD6DF58204ED76087DDA0858CBE9E9A9E9
+:102AF000738D209F4B3AD9BA083BC2194F1981EE0A
+:102B000076E83CFD3BA0BC64A734D7087BD6E4C87C
+:102B100053FFB18FC3543EE9086B34033C2B3DFB9C
+:102B2000A93881E381C2EF7B3B73E6AECD443C25FF
+:102B3000C2F3C534302C51BF7EC444FA7561DBD971
+:102B4000420DC0931A4C45681706D4EB42BA1FAE2B
+:102B50005E70B9F2DDB65596469C870D9F805A0E81
+:102B600059A9197D85ABF3D5ED6ABE5EFF4C7B8319
+:102B7000FE03EB0937686F7F96A3327DC2FF7E3A72
+:102B80000FA66FDDF58FF66BC80F648EC1FD74570D
+:102B9000349733FDA09FEE04BC77C5C8F0C64C1A2D
+:102BA00017CA435CB70D9BD2FD3E80778539571F0E
+:102BB000C7F27FD4D87742D1AE70D7A65C8233C932
+:102BC0003FB121C69313938FFA3CDF975A931F0DA1
+:102BD0009302F8BF399DCBAFADB75CE9DD81764498
+:102BE000B38665C1773B9B976FCC81767EBC19F429
+:102BF000078047DC5ABD310BCAD3376A266A65198C
+:102C00008778FC7873F59E4DA85F258F8EC98676F0
+:102C1000336479991ADB57B806E8BC55AFB6A79567
+:102C2000F49F647EA98666CE826C4D95EDF41D3AC4
+:102C30005611B8DFFD4CC6EF57593CD5DDCEFD57D8
+:102C40008691E1FE2760FC2523B9BFC3B2CE48FEC2
+:102C50000E4BF27F9DBC03CA2DDB347654E9446BE6
+:102C6000ED5A1DEAFB8B593BF2E30E817FEF4BE1FE
+:102C70007A21280AE97303ECF2ADDED38B3203FC30
+:102C800084B60A9F80F67BC9C85AA10FF79FE40754
+:102C900005B4FB2D152EC11589F68187CACF65B9FC
+:102CA0007E920EF8D92AE1FB40FD92B912705DA127
+:102CB000DF8A76D2F35851607FA7B3F83CAC073B6C
+:102CC00099F4D5757AC22B78BE4E65971EC0F695DD
+:102CD000750C2EFF7E06B7AB773D015D201F4CE2E1
+:102CE00076F389DD89A43FCE690D77A0FD74E2A952
+:102CF000D165046F99EC403DF2C4EEC9D3319DB368
+:102D00006526D53B21B01EB487E76CB95BC4FCD403
+:102D10000CC00BDB3BA3277A9CB3E541F9FB47CB07
+:102D2000B0BC58E3FB09DA91C58DFB22D04E9E1C46
+:102D3000F94A12A627347DF5DDD0FF5D66F62BDC5F
+:102D40009E9D1BE3FEB11CFE31F7A9741DEAD7BF9F
+:102D50004B4FA7F59CCF1CC4075083ECBA5BF6F62B
+:102D60001E064D8ADDD6DE3F15CC5CE6E8301FC17D
+:102D7000B4B4CB5E86D357D6E33C82E9F45E4F19F8
+:102D8000AA2FE5A75B8E60BA24D7F53B9C9F17FF5F
+:102D9000E17BAFBC08F0C8C7EBCDA807653ED137D3
+:102DA0006327F9EB740CF9216B92A7458B046C74C3
+:102DB000C6A07C78F6695183FBB921AD250C61C3AF
+:102DC0007DE91AB40B7745B7D4D0B8B3C219CEE3B6
+:102DD000DBB00F215D64453B63909F802F691D3EF2
+:102DE00093E9D310ED3147637E18CF1FA817CEE1CA
+:102DF000F303F55AC204EA274620FB13D406DCBFCE
+:102E00006DF2FEDDC63C09381FD648CF0EF4EB64E8
+:102E10009570FE67919C2EB07AD344FA849CCD962F
+:102E200016CF9DB80E5697E8EB0BA43BD80607F4D7
+:102E300091748219DAD75B050E839C21BCF0877EE2
+:102E40000C8BC9427A8D82BFB502DA0BD033701C6D
+:102E5000F34C83DF2974179BC1C73542A6BFAC650D
+:102E6000BC3D05DFB80C2E9F016F4983F868657C77
+:102E7000601C9A007C02EAD1F806F066761BD20547
+:102E8000487A81A74C1203C75FAD7184A15D647A53
+:102E9000F5FBE84F8942390278FE53F72423F269A3
+:102EA000F0387232D208DF46D087516F9FE9E2FCDA
+:102EB000DB58E911C83E4218C79F2C3AD01F68352D
+:102EC000AD167401E3B526F37D7A66A5A71BE5CAA6
+:102ED000CCE2083BD2F79DAC7D9D99F3F7914CC0B5
+:102EE0006F141BF899D8C441BDF0474FBF7B1297B0
+:102EF0003499B597E4E2FEF9F8FDB370FDB63E3AB9
+:102F0000B307F14FCC79AA3B061A745E94D77D19AA
+:102F1000F7EBA46C133F0E1C479207E040BF448DB3
+:102F2000BA1CE841052B7465131AA271BFD144E4A1
+:102F3000CF9C817A4A9486E43BC829614148FD339D
+:102F400088AEE4F957D6E7AE8C4C5A37AB89AF035D
+:102F5000EBB71B1746CA8355D609FA6D04361F0115
+:102F600074DF58A6F50B68D762FD28ACCFE29D91BF
+:102F700043D769874E9A3903E5F4C31AF36E367462
+:102F80005E81DC7E4B7AEDC371540EF9A291FC7D1B
+:102F900001F86A43C1EAF5B859FD6DAC6BEE8CB42B
+:102FA000A1F989C90B66E23E9B58CB68FD83CB47EC
+:102FB0003DA65E57B237C7A3FF88F9BBBEC17ACE24
+:102FC0004CDE5586FA7CF0BA2A74971A1B7A5F1089
+:102FD00033395FA646D84F95935E21929EE04C11FF
+:102FE000E303EDA20D197C1FBAFD3513ED43EC236D
+:102FF000A31FB75C7B57EF93B9B00EA5573468AEEB
+:10300000B0A3EF1CFAE14C48A7FDEADDD5FF0AF5B5
+:10301000A67D651A87F96FB0BE19E810F1F5809D9D
+:1030200001F0DA2FF6B4A0A3A4B192D971DF55FA5A
+:10303000D923F7F30B9DDF49F23557643B490E82E4
+:10304000651E402F0069897E78197356B690DD6839
+:10305000CDCC07598D6EBDF625B45FFE49CFD0EFBC
+:1030600038AF42D295C0F8E7554ABA65E8C7175954
+:1030700039EA11F32BEC943FBFD2CEF38D3C7F4164
+:103080008583F217543A78BE09F2613E1656F87BF2
+:10309000BDD0EE42538CA4413F78A593975F355045
+:1030A000F93B600F6402C98787F949DEB77CA6E166
+:1030B000F1124FB85F005C0D91453D12CEDF7D1AD5
+:1030C0007B162486149199017EB6C2E9D742F9F3A2
+:1030D000CC9F8013F946F56A6736E4BF912C9A714C
+:1030E0007C6F38C06EC6F9AB1569DEE907F01B3599
+:1030F000C914CFD821FBAD7D2B8CE467055D87FC1F
+:10310000AC6C45A2ACC7F0F26DCBCD7ED4C7400EFF
+:10311000D23AF6DF27921E00F2F0ED1CD48B5ECA85
+:10312000B4874948B76A7EB3542F2FA1F62A99195C
+:10313000EDF25995BCBDC697347E0DEA55A679339C
+:10314000910E1AF7323BDAAFCF569F2A8B45789B08
+:10315000DDCEE5875A2E34566F392EE1783C1A734E
+:1031600016D5E77EAD464FE92EAD30C8CFB4DED2DE
+:10317000A0FC182A6FEC3DD84E4255A97D13D4B35C
+:10318000C038D18FBD4DCFF37DF7881467B0548B15
+:103190005DE68241FE4E91A7D0827C1845F245C57E
+:1031A0005FA35F52C33F92F914F85DC471F97631A1
+:1031B0003BC9955DEA7A20273528AF52DAD4F96702
+:1031C000B204C52FA59A87E079B67AB8DC0B1EE762
+:1031D000E0B8BAC246D1B8347C5C28D7203FD77457
+:1031E00088F2732B45BB24A1BC6B3F85E31FF5928E
+:1031F000C8BA009E555D3413E969D6660DB94366B9
+:10320000B35E920B371BB7E2DF081E67F0F8366437
+:103210006869DF1CD007D71B491F6C7DC4A4C1B8E7
+:1032200022E85BE1E8573897551A9E09F33022539C
+:10323000D6D7AF6BB93C6934119DEAAC8FE504FA7F
+:103240001F84D1A523B0BEEE7AECBC728A1BE9685C
+:10325000DCC172AC58966393FA607C2AFF73389392
+:1032600002E6F7D6FE18157CFBD54455FD12102E4C
+:1032700081E5538D79AAF269E6712AF80EDB1455BF
+:10328000FD19D254157C67CE9DAAFAB3EDF355F023
+:103290005DC54B54F5E73AEE5595CF2F7F4855BEA7
+:1032A000D0B946052FAAF87B55FDC5AE4655F99213
+:1032B0009A2755E5C1F693929666723FCF569BE7E3
+:1032C000A483E48B4B70460EAD67A914FB03D73D76
+:1032D0002A82EB53C1F51AE5F57841E0FDB1FE48CD
+:1032E0000DF29DE27F63ED912AFF5CD7E4C9C63EF3
+:1032F00013FA72ECEF23DDB213DC1FC5FCFC3BC5F7
+:103300007FD5FD04D483F65647A65B71BF43BFABA0
+:103310004B0FFDF935E4BFB736D70BB40F6EAEE7F0
+:103320007E95AB7AE68A0DC08385F37EE5788E8242
+:1033300027734470FF6018CFDF26FB959E43BF5272
+:1033400036633FB0287E7817B59B50ACF7A17F4617
+:10335000A8F6087A945B2E66364828079753FF979D
+:103360002BEC2358887956D256AF8D39A07D5BBDA2
+:103370006FAD1EC656973969CBB3D0BCCDC3C81F3D
+:10338000F368E6942D6B81E7FF2153A2754910F98C
+:103390003C3F5FF7C6B93DD05F6B95A508E56A7005
+:1033A0007992BBF3E2B11B943FBFF2D50FEEBFD1D0
+:1033B000F7751D679A02CA87F58B56243247001DA0
+:1033C0004886D07EF91FC874E59EAC273FD6335A95
+:1033D000D793C8CF1726FFD7C4BDF0DD79E9CA3D22
+:1033E000A8A743FE0F301FEAD1BC9ECFBC44E729FB
+:1033F00052F340BF47FD3B2C34DD1E94DB17AD95E7
+:10340000FDE8075A1DA997D0CE4F327E467EEA0EC0
+:103410001DB7AB83EDF7E707ECED76B2BFF7CBED69
+:10342000EC9653AD997FCF8C3E265AE4F84088F94C
+:10343000D046B50928AF12ABC54F02F9A23B524F97
+:103440007E048B49F63B986A547E01C56FD01D7986
+:10345000BF80746FE95A417E7AF417607B07E57587
+:1034600009F6172419FFB4E8E3D81BB5CF06F223F9
+:103470008410FD04E1A1F82782FBF1A33E81FBCC7F
+:10348000CA70D22782C77D39B3E450663CF248FF48
+:10349000C93B507E9FD2D17E381CBD8449E1CC1FF0
+:1034A000D07E6F26B7EF23726254F991F644E60F8F
+:1034B000F45FB364F32711320C5BCC487DDFC65157
+:1034C000D8DFDBBCBF133ABB8DF441D8F6D0FE7B0E
+:1034D0004FE6E7EE5C4669AB6C97B7011F63FA9C59
+:1034E000D74CFAD936E03F84B77B254AFDDE1C4A2B
+:1034F000777AED54BECB5B4CF01EAF83E0BDDE723D
+:103500004AF7799D94FF92B782E09F7A5D94B67BEB
+:103510006B28FF15AF87E003DE06825F457D5044D0
+:103520003F7533A56F785BA8BCD3DB46F09B5E3F4D
+:10353000A55DDEBD947FC8DB4EF0116F07C1C7BC2F
+:103540005D04F7787B287DDBDB4BF9EF784F13DCEC
+:103550002B8F93B1E65E2FFA2B5CA284FADDB3AE1B
+:103560006A33EAD7B6651A338AF336976605FA39AD
+:10357000B655F2789F6D9586FC40A087FA519FB3AF
+:103580002D7BFAF8342A5F40E55BB149304AACAB99
+:10359000B8FECA56EAA99E150F02C177DB6A2BFD59
+:1035A0005A805BB2C3A9DCBA4A24BBED798D273AB5
+:1035B0009BEB5D24BFAD3AAE3F28741021FBE9229E
+:1035C000B2444A976573FCA33242EF2319594AFC6F
+:1035D000A4B907C767AB82F121BE55F5468C5F5A87
+:1035E000EF83F149A43FAE3A047824C378117FC039
+:1035F00087FCC26C19D797AD55EB08AFE465F3941F
+:10360000786734DAE96D9EFAB9846FA5487ECD36C5
+:10361000D7A1E8FB504ECAE77CACF1E14E7FFE50EB
+:103620007C3282F0DFC6B8DD900CFAD2FE10E300E7
+:103630008B47A9C7FD788F1943FAF126CB7A62B27E
+:10364000C0F98F3D2C12FF6D67A0F7C177CF817E47
+:10365000E7433950BA6F15FAAB1ECD724DCC023C20
+:103660007E248D3F24021C53CEDB4FAF17F7A01EE4
+:103670000DEB7DAE09F2373EB8D989B671EC6669BB
+:103680002DB25BDBB25713D0FF952CA8D74749CB9F
+:10369000653CB63B787BCFD58BE44FB6AE3A90769F
+:1036A00084F75B86FD268EFA7D18BA613216481AB9
+:1036B0001419C955E245EC2FECA1CDE5D85FFC66A5
+:1036C00087D25F21F6F775E769E4E365565708BCD2
+:1036D0008693273793238BB322E3488E24B1249417
+:1036E00023CFEBB8DCF29DE4FA241D869934B41F95
+:1036F000257EAEC4D383E3E835323D241942C76149
+:10370000570DE8FD3EAAB7DDB1C949E74B303E0B86
+:1037100045AB756C05AEF3EA9270F3DA10F4A0A431
+:103720005B508E01DFDF8B4623B5B3B99CB7A3E1B5
+:10373000EDDCCA56115C6232FB42C86B257D5A6EC5
+:10374000E7812C4EB7490FBEB4F118AEEFDB3A3A21
+:1037500013F49CC6BF11ED04DF092DC9D7446DFBDE
+:103760008E3D017835CBE3794EEFCFB523FF407B1B
+:10377000F92857915FF2C97FC16605CCBBF2DD5ACB
+:10378000D98FFDA36B1BA229BE5CB52E0CF5A33609
+:1037900066247AB0EA3CD18501F46045BA0C411F39
+:1037A000FBB2F44A3CD5543211E3327C5F9E8A72FC
+:1037B00009F03E581D45FBE1D465EFDE3916E05BAC
+:1037C000AE8876D4CB9EABE5E71327FD5143E726C1
+:1037D000DE7C9CDB7DB7FDB7B21EF47B27C8E9B366
+:1037E00068E7417A4B33B377C1BADC526D22FFCD23
+:1037F000AD57C5B381761AB9A4C7A37DC1FD3553B2
+:10380000FAA13C80FE267DA6AE0F33AA453D23A13A
+:103810004F9D6FAB3A70661AF4D356CB3F6EBBF632
+:10382000FE71847DF51AF29300F529F49340FE4D64
+:10383000D19780E716371A19C973EB32A319E541FE
+:10384000B7259CE45FDB6213E9A11B325787A19E79
+:103850006CA8AA8FC674A4DEB7037DA7DDBBFF7D6D
+:103860009E2D81E42D3F7F8184590CFAC0BD7AAE34
+:10387000E4F8FAB64CCB4479A9A1F2C3BBFF7D8B27
+:103880000F7D07AC85F090342C910F7E00BE9BE23B
+:10389000D402DF2F40674E44F874AEAB07E54342D5
+:1038A0009CAF1B8BB69ACE56D2F9E2CA38E2335D92
+:1038B000B587E931BFB2C818C8E70A9FFCB5FCFF5D
+:1038C000B41CE7BB991CB859BB37E3F79FA573BE7F
+:1038D00019CE9E360C234F15FB18CF9A638A6C4B7A
+:1038E000FBEA597D48FDEAF66CCE67C57A7E3E64F8
+:1038F0004EC5F4728AC3F8FA443CC79693CDF9A931
+:10390000CD124971E2B674D6857103DF720DF7F7F7
+:10391000C4F1FFDA2AD3C93FD42A78A27D19783EB0
+:10392000C29586EBD706731409FDB7A672B9CEFC13
+:103930001E33C6ABA19D9A40FCC1DEF3A9E9989164
+:103940003E4CFE0B2DF19EA40FF0B7A35F1CFD179C
+:10395000C1DFDDDAAF866FBFAA864B984E054F35C3
+:10396000AAE16966356CC9E67AFA1D3675FE0C491E
+:103970000D27A71C09D3F073EDA6017FB344F0BB5C
+:1039800099017EA00D9A7601E725A5AF96FCB2AD10
+:10399000A9DCDF935CAFF67324B296B53102F96D02
+:1039A00054F9B6FC5502FA736CD5EA7C9807158C6D
+:1039B000CB8AF4BF24D7959F8D71E9027EEE3A4BF6
+:1039C000EBE9CDC575688B233E4A93CF050DDD1F0E
+:1039D000B7D0B89576900F7C01E345FA0F842FE6B7
+:1039E000BA2667C7733EF005EE97F97D3AE403A562
+:1039F000BFE1F841E1C762396EA29CABB922B7A51D
+:103A00009CABA997CFC775049DC7B9925C46E78167
+:103A1000AEF4AE090FC577C867BE6CCE77986E94CA
+:103A2000CFD720DFF9F49CEF30DFF0D52A6728FDEF
+:103A3000F0BCBCAF3CB437CCFC71C0F856B647AB59
+:103A40006077478239F0BCD343F80F74BA37333A02
+:103A5000475A2B0FE78B33BFDBD308E95B5A970B31
+:103A6000D76765D6593D8F33F5EB51FE9E97F7DF4B
+:103A70000D82DD385AC094DBA58D66BB11FDBDCC2F
+:103A80009FA1F257287E87D52BD2AC3180FF8801C9
+:103A90003F82D34CE74DE333C98F1135D571372BB6
+:103AA000043CF7CC986F04A2DC854E5590C78F6517
+:103AB00097FDD0973C385E03FAAB02CE2319440F32
+:103AC00023B97335954901E7CA5B65FFC5001F9BA4
+:103AD0009697607F3FCC96783C8679D672FF9FDAC6
+:103AE0005F66B86A53B533D87EB2AADF56D92F7253
+:103AF000F3F6D5FE37C3D5F461DACF0E6ADF1CB218
+:103B0000FDC176D57EBCAF111F6F433E18CEFFB509
+:103B10005F96A71B6C9E5EF47FE918D89514070684
+:103B2000FA98886A23FF69C3F979535DB2DA0FA660
+:103B3000637E921FCF47D690FC48603E8ADF59983B
+:103B400087F2D7474DE7F1BB60B9711379C1988708
+:103B5000A1DE00FDA9F2573FC2F7D346C1EE423CB9
+:103B600083C7F3FF8ADDAB891CDF4BFA734AB86465
+:103B7000B881DEDBEA7525E3F71BC23D3518EBFEA5
+:103B80003CBB2E763DE83D1B30C6087C7635BB71CC
+:103B9000BECF84FB24A78FF5711AA227CBDD961D1B
+:103BA000DA007AB2E85D69A8F75A34F2392FFCA13D
+:103BB000BF6CBD65E7A610FD2BFA9B025B2B008F47
+:103BC00000BA6D95F5E681FE9624EED006B4633119
+:103BD000B80AA93FE55CA3D25FD337EB6FABECF734
+:103BE00052FAB3DEA31E9F55EFA1F159E5FD47E957
+:103BF0006F2B8E2F045FDDB43FD98E1EE86FA97A3C
+:103C00007C568387C667D572FFE1407F4DDFACBF2E
+:103C100036F91E934DE6D3E1CEFD370E9CAB761AF6
+:103C200051AEB429FE40797FBB14B4BFAD96F737CF
+:103C3000E5FB4B71E9E4DFBDD433DF186A5FC3FDF8
+:103C40008CC97A2493F54826EB9108CF997AA63E41
+:103C50001EE8B0F0C5B6F922ECE3731E3A333E1508
+:103C6000E0192FF6CF17615F9AF3E2990349F0C983
+:103C7000CB2FBECCCB7F78E64A32949B7CEFCD2F06
+:103C800003382A96EFC70ADE4ABFB78DE27AA3BB94
+:103C9000E173EEBF04F98AFB5663AA87A17FF14264
+:103CA000727FD432A8EF4EE9B72C0F312F4AEA6E5B
+:103CB000384F7E46147928FFE6E1BF40B4CF53EE7B
+:103CC0006794ABEF6744456D22FD2F8CF9CD28EF4B
+:103CD000228C0EBA4FF8D628BE1F2C64F60A6E3717
+:103CE0004859F2390DBACF31BF586ED77CCBCFB11E
+:103CF0007CA1C6B11EEDD9DF4EAA8A47F558391707
+:103D00009737787F72D7F51B9C1F0EBE3F39E7238C
+:103D100081EBC223B8BFA53B57E2F7B902FC86A8E6
+:103D2000F70E379FB5A3B87D3F389F0E3E9F310EEB
+:103D30003E9FE6FEA8B5B0FEEEE87ECB13C49F5DC5
+:103D400021E76BC8BC06CD5FFD28A6D8795AA4B779
+:103D50009BCDB732AFCAF9C14641CAA2FDEA4F793D
+:103D60002AFD8331BB142A8E83F419B8BFEA6D4E45
+:103D700086FE195D9C3D07CF9537FE451BF25CDE44
+:103D80006E793ED64685D3B9CEC6283DD9DBDD5106
+:103D90003319FA9745D3749A97B2A8723A6FA98DDE
+:103DA00065ED688F069F23D78EB89BCE0169AD68FD
+:103DB00041403A702ED961A4F889B9E886E7C8C5B0
+:103DC0009B9D238F99C9CF9147E9257459B445EA42
+:103DD000439E237F6C14DFF7BB713C71883F8C27B7
+:103DE0006D701CA299C7D1313F02F2F56617237F8F
+:103DF000BA3CDEC7E47550EA1BCC1E86F240ABB776
+:103E00004BA8A768C3F93E61B069584E08BFC8F710
+:103E100047E9E8FB4F72CD34AF1A23D7CBE7FC5A02
+:103E200008E94F7A7594E24F0A4D67C3D1C93C0D3A
+:103E30003F47A7F0E102939ECEF72D30D94AD10F2C
+:103E4000B20008EFB39880FAB72DE2F78145BB0DB9
+:103E5000E9E737536EFFF96F18BAF9B97C3E35437D
+:103E600047F7E34E09CC618F197A7ED5E98C9E869F
+:103E70006E9ABB669D5987ECF7E2F2EF15617B867F
+:103E8000E353751689EC9F7746A15CA84E5B1F0F24
+:103E9000F0A2CA421DDDDF94E344EE082EC79FD195
+:103EA000BA4E8EA278D1E751A54847627F2AE2A395
+:103EB000C48902EABD372A9EEACDE1D7C5A0DE1843
+:103EC00094D3677FEF62B41EB6507A12DA4F2C306B
+:103ED0006E23CB07B4A302F3D17E6201EB272C2F14
+:103EE000B6F68590174A9A60DB92520D7C9E90D070
+:103EF00042A992FFAC435BEE0FB1AE57E575FDC62C
+:103F0000764C1B603B71D08E01FBE52ACEDB17D5CA
+:103F1000A72CE36148756517C98EB1E9153E9388F2
+:103F2000BF06611EAF04FB4575DEB0D5EB4BA1FBB0
+:103F3000FEF2386D2BD646A31D03551C489FDBBCF3
+:103F40006D29659983E3C8CE91E9138DB689A817C9
+:103F5000F35F725CCB0CF497249B34743E012653C0
+:103F6000752F616E59F4B4383445DDCC6E92D02E85
+:103F7000EF253D3FE1BA96F820E1F0628671ABA4EF
+:103F8000B87601EF030DF423DF6FAE97E3B9575C0A
+:103F900065348E04EBC0FECEC80E8DF3CD4579742A
+:103FA000E5698E51C28FD5E5C971FCDCC2FDD5E152
+:103FB0007E09E83AA9B6574038010C38F4C5275CA9
+:103FC0006F4C6B4279F25A04F98BB56D99CC07F2BC
+:103FD00027557445E5E03CFBA5FFA6C990070BDF1C
+:103FE000AD7C209CF4B336A16506D925F769582825
+:103FF0003FCF981CEEC728C8E1FC9F606B4DA91EFF
+:1040000087E9D344375F97CF6790B31DF4D9119FE9
+:104010002DFA581CD47B9A75A1E9739BDCEFC07E06
+:1040200021CF5F187319917FB582933B39F7EEDB8F
+:10403000B7CF82CE1346E75536C97A8DD24E444E5D
+:104040003B1546D81D0CCF450A6607DF07CC3E9BC3
+:104050000FD6ABF92B6D487BEBC11C791F496BB2B6
+:1040600061FDB24CBB0DFD94C1F7551AD326DA7031
+:104070007D1A670CD0A931705FE84ECB7E1FCF53FD
+:10408000997A742CF01C5970AAC77321B1372897FC
+:10409000CF97371DE2E7429B4C45BD780EA1C9146E
+:1040A0005744C7FE4CFC9CA952DF643A46F2DE64DA
+:1040B000E7F15613EE0F02A2C7E7A13BED18CD833F
+:1040C000526F5A0E97AB267B17C3FB5BE1763FD549
+:1040D0000B139D3E0DE01F16C7E8FE4F9891F35558
+:1040E00004AC8F3180EF957E6FCBD1D1BC352517D5
+:1040F000F596107E22DE04674DB6221BEDDB38DF1D
+:10410000D06F63B442DF9CAF1F97E75B69A7513E56
+:10411000FF7A4F43CEFCB258F41339D7E460BBA604
+:10412000E546B483B491E36FD8DE8661DB6B5E282D
+:10413000B7F738F28536B2C88CEDE9505E84A0C37B
+:1041400067E476FE57E3ED30B374DF97605A309F33
+:104150002D94DEA3A4468CA38F1BFADD3796BFEB0C
+:10416000D47E2490BF7B71FC2B93CF1E2BA11CEE21
+:104170003FDA2EDB278A9D6191DBDE2EF07BE83E65
+:1041800021DC4EEF36C87687254C3D0F83F741F989
+:104190003A5CAEE0E7E62EC7318A6B04F3F3E577CD
+:1041A0003E8A0EB44F50EF736473BB0453B44B1C80
+:1041B000B29F0D61F41BA09DA2F0FD805FB742FA93
+:1041C000A75B003F03C86F0DB42B247B88BE0DC9CD
+:1041D0007D69C8E7A9F23B0543F6D75C2EA7854762
+:1041E0003F4B43FE2E8BEB4FC0EF82F9FC8547AE71
+:1041F00026E0785E983170CE86E243AB17A7F37B5A
+:10420000D9C7FF1CED0AD1FECDEE7F459DDDB486FA
+:10421000F4C0E55C0FFC5BDF07DBBE8CEB9D1D8211
+:10422000DAEFA4CDE57AE75FE47DCC7A55A4F72DEB
+:10423000CE65B92E201FB60AE6E5287F531FE1E7B9
+:10424000E6563F5EFFD90321F84118EDFA734E8020
+:104250003D5CDCAC273F5AA3297DC48DE21CC3AF73
+:10426000B387CB71797D4B1E35F2F3242EAE175BED
+:104270005CF7D33995E0F323C3D53B24CB3DA5BEF2
+:1042800001DB4779629A47FE804B6823A0BF4D96B9
+:104290007BC17876E264C8F36304B9127568451887
+:1042A000B6AB93EDB1ED8A3FA3A2C8E808F85EB7BC
+:1042B000B8C8581A402F8D8C9FDF0D6EFFCEDC01E1
+:1042C0007D5AA5AFE8709F45DF509CF8A7013943A0
+:1042D0008A65B8CA8E51FA0F3E3F16705E2C8CF379
+:1042E00029B7675AF1DC18E8B76B2B968FC4F96DC4
+:1042F000155D2F58611EFA3F30D039E70F65BEECCF
+:1043000093F972B8F5F3B143A08C31F6043B829770
+:10431000D6804EC68F40FE68CCD494FB438CB35CF1
+:104320001E6708FDFAD6DCAFA75F97E686D0AF51CF
+:104330007F7604C51F0261D49B1D21F4EB1382EC30
+:104340000F90CFED9CD0491D7D300F276E1D616F02
+:1043500094E89E91C35E04F6C38B6732516F9F232E
+:104360000CBCC723DB318C60B02316225E739967C7
+:10437000DF0302C5515AEE48A3EE045C8F9BADA744
+:1043800024FB1137C23A61DCA1F5DAB219A1E20CC3
+:10439000FF38402728BA02EF07C02A04C49586C414
+:1043A000CB82E263184E1938FFAB1D5AFFAE62751F
+:1043B000FC6AE335EEBF30AC60FE27043C1FAA2E3A
+:1043C0009F5FAE0B8ECFA9E25A0B9DBA607C7C88B2
+:1043D0006FB28C6FCAB607290E3E2D45E4FDAC6462
+:1043E00064CF07C7BD0C85BD0E2DEAC3158CF4F74D
+:1043F000603F369E1725FF5E0563CF0974DE5A7D48
+:10440000DFE4E959E7F8FB1C2DE5D88F2D53C350A5
+:104410003F0EBEAFA0C49BF0984CE07D69E5DD2265
+:10442000CB620DE1C77CB753B9E29787FAA6124B6E
+:10443000C0B9EE556CA03EDDA3F2851EF7D6D65965
+:1044400014EF4F1CEF29EC82A2243BA37948AA6603
+:104450006407C03CA8E2FA86945D34CE4B358CC527
+:10446000F238A0AA3C017670A44F18BF2ACE0FE301
+:1044700054C1C176E7CDEC4D434AE60DE5F9CDFCDC
+:104480008D06395EF8466E641CE93B63D818D47714
+:104490002C8B9FA6F5B804EB817E59348442C5036A
+:1044A0003743FB6807BA905FE2D1DFC454EFCA30EC
+:1044B0008748F7C984628EB310EBE4F1E17C46FCD7
+:1044C0006D0807950BF859986C70E0BC1B0C00C385
+:1044D00090053D332640BE56F637AF1598883033E9
+:1044E000DB8DDC4FA8BC6BE3A7776D86EB0774FF11
+:1044F000BE30ECCFC7BF53FA19F28EDB0DBE27FBDF
+:10450000CD1CFC7D19F91D95FE879BFFE1DE6DFB3F
+:10451000C3D4772770BF6732D16BE520BD12BC4C86
+:10452000A647FC1EE5C2BD4AB1AD770CDE373CFBA9
+:1045300070841DFDE003E3F0DDA9E5EFD1FD75ED2D
+:104540000DE0619348BE0F8C4B6EEFAF1D17FD025F
+:10455000E4DA06BC3484E74F2A199D27B0B84ACF65
+:1045600089740E00C6A0921301EF13407B1B0EF15D
+:1045700073AF5BF19D0B71B05FD42BD06EB0554221
+:104580007E083B4849AB19BF1FACE0D5A8073D1AD0
+:10459000E952C3F5E8D9A63E11CF35E9E2FA45E480
+:1045A0001FE7682EC707E8379ED1F90B6D927CCEC6
+:1045B00071A4C4DF4DCBE4FB9BD2CF84D11A59FE4A
+:1045C000F7D2FB47B3234ED54B76C6F2F6C52F4440
+:1045D000FFFCEC11A7EAD3002ED867E170D2A92B1B
+:1045E0006966C6ECFBAC0BD19F3F3BEFD495748062
+:1045F0008BF6D978F9144646CEF87D090BD19F3158
+:1046000061B459D5FE5B38D7F1DF3CD51A3421CFE0
+:1046100063DF365A394FC9E83EADB3F397A7312E61
+:10462000E954F647872E48DF81220BDE23937F7102
+:1046300051140F9D29D3D99DF8EE5214FA2DBB6861
+:104640007E470DFAE99FFE6BFCF482437997CACC52
+:104650002A81FF1B1B982B2C2380EE9943739D9F6F
+:1046600003A6B881828FD2FF10BC6069C59840BC98
+:10467000B6513B0A5E170A0DA48705C7872E08FDB1
+:10468000DBF19C54C4CFD62FC275BA10D99F2A0033
+:104690001C9EB79ED6ED427CFF76C11E00EBF83A19
+:1046A00056EF2BA275FCA3D6513D7A02BEDBC5DFC7
+:1046B0006F6896E3504FC6BB7C689F01DDD1B9326D
+:1046C0005F8A9EFC4865E30547A03FB06E34F7CB98
+:1046D0005C92D3698616CF49A04BF70181AD85FA6C
+:1046E000EE6B97F5A89FCCEE3CA3473DBAEEC01900
+:1046F0003DDE4BAD4318DAA9DBA67784D2FFFE324C
+:104700005AABF2972976D7D194ECF5E877ABAB1694
+:10471000E81EDEEAD7B91F6EF5321C256377DFB2DB
+:104720009FFCB855CEEEF5982E657D47F1DD88C526
+:104730002EADEADCC0929A08553CBECA13AB8297F4
+:10474000B6C0EAC03EBBB42149F51DC35DCF82EFC0
+:10475000280EFED0FEAF90D771B16D732FFABB1645
+:10476000BBD47ACCECCEB5620CE2ED11EC1ACEFEE5
+:10477000127EB7848F10D200BD0AE67D5A07D7A3F8
+:10478000EA2A8C649F54220CF35A59ABF5E39373D5
+:104790004753F454EEEE10A8DC2D97BB6B046E5714
+:1047A000CBF275A98CE3928327A7D175529FA337CB
+:1047B0003300DFA515E5E7881E657D43195785C4DD
+:1047C000F58D0D29EFE9B0DDA5DF17586C1A8D4B7B
+:1047D000A5472DA951C3551E5D909ED5A743F9BD90
+:1047E000B4419DFFF3D1F2BE9EC7F2909FDE182D1B
+:1047F000889F1807E13FA5BC7702EF815DD23A0F91
+:10480000227DD6EABB0A70DFBBA47511AC94437E4F
+:104810001DDFAFB8BEA201CEC3EF1B750E33DEA7FE
+:10482000F5AD14886E97B000BD276DB03EC1DAA11A
+:1048300070BF2277C39CF5E40F3D2898516F281371
+:104840001D22DE836F1CC68F7E51E68313AC2F1FA3
+:10485000F1CA46228575CA9E3F82F699ECB796F951
+:10486000308E943D4E20BFC49D80714311A622C955
+:104870009139B03784419AAD6DAF20F93E566FE65D
+:10488000EF62DA58A0BC70FC331370BE1075B20B27
+:10489000937BE8FDBD396D9B2FA25CCCCC70143DA1
+:1048A00005F83D19C6FB7FF275C1BF16DAA9CB3FEB
+:1048B00046F2D30AE481FDD6D96439DAA1F6CF5A9B
+:1048C00051AE21C1CCCAA77E1394F832D015EDC3E6
+:1048D0005DA5A49F58E57E9F2D94B8DDFCA07C2E9D
+:1048E0008DF9D6E2F9FABED18CF295F41BFBABCA76
+:1048F0000431285E50371AE679A5AD4F75DEE95BC5
+:104900006CBF01E92CB87D18BE2A5E394D7B2D8A1B
+:10491000EE771DCCB0DEE8FE94D6A83EB7A4338770
+:1049200007DDBB53CB9FD9F6A4A07B771941F7EEE7
+:10493000F282EEDDA9EFF92D744E09BA77A7BEE732
+:1049400067B0CD54D50F93E6A9E0889CBB55F523FD
+:10495000EDCBD5E7AE8EFFBC4248C777067D7D2EF6
+:10496000988766E08DE298C17D242F0A2A431A3E7B
+:104970002ECC846973A1A10BE9A43991DBE786E30E
+:104980000FDBBAA01DE388978CE86FFC89E02F4508
+:10499000FBC4289F5319FD1853ED33AF1570BE5259
+:1049A000D2DBF25CB3F3617DF2F74A49FC1DE0DE35
+:1049B000D1B83E467C6C03F9E6557EAF78AC6C47C7
+:1049C00028ED3C5F5832350FBECF7FCC3183E2EC0F
+:1049D0001DFC7EF04E3D8FA7F85EE5E75BF33BFAEA
+:1049E000348E00FE3E99C7F590679CA5141FA9EB75
+:1049F000845D16F9A9EDAC1EEF65D4757647E17EAE
+:104A000056E03CAB47BFC960BEBCCF89FDE168AF93
+:104A1000FFAC3D743C6D6D9E9EF8E3982CD7AB1EA9
+:104A2000D672BB913966E1B971455E57EDE7E3ABEC
+:104A30005AA8E7E760311A1D426E839C3EAB96C3CD
+:104A40000EF57E708B7F3DCA0E90DFAA7A4B174C15
+:104A500027BBB712E436F231C87375797213C917E0
+:104A600090E7AA7C77DE803CCFBF0EDF9D766A425E
+:104A70008EF3708148F378DA3595E6FF199847F49C
+:104A8000A73D3364DEF87CDE6CBE5EC6B50F58B75A
+:104A9000E07ABF2EE0EBF6F230F2FA7D795D770A2C
+:104AA000BD45284CDDCE70A2DB254663099E7B38D0
+:104AB00096F26513C6E1AA7E2ED03DFD7FEB3E6ED9
+:104AC00041FD5FBFFFA805FD61EEF6A316B04D598D
+:104AD000AD4E5A8B7A3CD0851DF59EBA8E2EC27F84
+:104AE00065FBB86ECC5FD921D0FB3DEE0317A7D391
+:104AF00038595F13C60B770E83D78FF2B8FEBE37D7
+:104B00004FE27E3017F489FBFD0183DF2F201D80EB
+:104B10005C42BC5E17F0E535B673A3B122941EF576
+:104B20006FF27C1FD9A867E8AFAF85EF711CC75241
+:104B30008EE98D4847FB05B2B5DDED27174660FBD2
+:104B4000F53A86FA8582DF1729BD1FE2F83FA8D61D
+:104B5000A1A78035566B69BE3FA8D7523BDAFB74DC
+:104B6000042F5EC1CF551CAEFEA82909DAFDA05660
+:104B7000A07B0C53EFFBF3318417AFE0FA5A303DC2
+:104B80002BF41A4C9FC1F43B844E6BBE199D1EC979
+:104B900093EFD5E4B102DCE761DDA759917E1EE118
+:104BA000F7E32BAE1DD6A17F33BDC96C7F02E03188
+:104BB0005AFF7A0BCA89C3BCBCB07687C0E58D7436
+:104BC00037F26152B39EA1BDFB7E1E974BEFE37A95
+:104BD000C5E3D0FA058CAF31B1371DE5529A1C4FB1
+:104BE0007A45C72AF6535C90CB9B31AFD954EF96E8
+:104BF00037E571BD43918340E6AEFDE4976D4FC448
+:104C00007B142FCBE74153E5F6B232FAA7CF85F4F8
+:104C1000AA4C2F67643C14F8B24CFF6CDBCF681FC2
+:104C20009F2DC759663674D179CC3C83EB5394875A
+:104C3000B352DFABC57DAE39FDED7C3A678D3725CC
+:104C400026E2FBC9FC7778D2A7DBD660DC2F379C45
+:104C5000D631ECE053741E382C6BBC35549C434960
+:104C6000DD57257A8FB0EE6A3AA50A3CF7D0397D38
+:104C70001FD90117A7139F5CB5A9DE2DFC54C67B75
+:104C80008CF23E5D27F7F3809C168B8B06EB29F3A5
+:104C9000809E651C6F58D62E5AAF35AB5821A9752A
+:104CA000EC29FECE66ED4901DFBD58A473E84C3017
+:104CB000DFEF8D60251F8BFC1D245736C64D8C748D
+:104CC0002FFB84D74C70AFD746F029AF44E9AD61D4
+:104CD000CE887C6867E1114F16CEDBE1945627DE63
+:104CE00057BCF08E4EA66B33BF2F2ED3DAE54E2D78
+:104CF00033629CEB00E8E3C220FEF75C4DA4FBDDD1
+:104D0000BFC3FEA09F950DBF217967AFB9381DEDD8
+:104D1000A2C2DA334D08BB1BFE3C1DF5890F61FFB3
+:104D200020BD1EF47B9B8072E424BDD35D79358663
+:104D3000DA7959D33F1DF9CBF7A640F76F3EECB8AF
+:104D4000A8B7F2FD89DC73782F1CFDF2B3F2A3B98A
+:104D50001CE92CD4D0FA3A24D53BEBDDA3FF2B0A77
+:104D6000D7C3D820FD7A0A7EDFA365C8BF9B4AFB64
+:104D7000A3CC21E4EF69F4DF65F371B0ECA1E51594
+:104D80007A5F169E93AC90E938B8BC3C7FC03FA1D7
+:104D900073CAEFEB0801FEA12AC6DF3F05BBA72BB4
+:104DA0001CF8B8AA732AF967AA3CC20DFD33C3D117
+:104DB000E1D74DEB18F7CF2830DA8D817E4DB41B4B
+:104DC00099AA7F1F7F072B25F386F774DC7D891452
+:104DD000CFAF6B6614EF5A797534A5E75FDF2021FA
+:104DE000FF18C3FB5BE97E6BB686EC8C953EB5FE87
+:104DF00033A580CB8529057CDE5CF9602FE5B00109
+:104E00007B09ECA27BF3B95D147588A9ECA5E07C65
+:104E1000B2978CF23D1D1013AE5742E07D474169B9
+:104E20000D7E97CA5A88CED93BFCFE72F038D7E483
+:104E3000733E55F87A31F235D26F07E7EBE076E74B
+:104E40001594AC413EDA384C7CAB5CE6FB956D8C3E
+:104E5000E6CBDD1643F3F4056B7396025D7E0178B5
+:104E6000E03DD20B4E6744347C7FC1E58CC0F33DFE
+:104E70008A1CA86B0BA7EF3666CE8BC573A3CD48F3
+:104E8000F7D0DEF98EA9469CE77BDA38FF29FD7D55
+:104E9000D8B53816F96982AE5F6F87F2E4CE335128
+:104EA000A8F74D787D7E2CF2E17078FEFD1819CFC1
+:104EB00086C4121E9787BD70A26C4F007EEE27BA83
+:104EC000E89DFA871A18D16FF7ABFF56877C7CBE36
+:104ED00033C28CFBE6170723E8BDCA0B6F1AE83D07
+:104EE0009A5AF97DD52F747D7348BF7C5D4BF722AC
+:104EF000DD6FFE472BF2A3FB55039D3B7CA873C3DC
+:104F000045DCF76A3B679CC377566B5FFADBF2C3FD
+:104F1000CA8654D28B14F83FBC4627BEF37B5EE4AE
+:104F200072E2A18E7F217DF7A16B970BF07CCA17EF
+:104F300007FFC744946BEEB72E4F4479E6FEC5E5F4
+:104F40008958EE7E2DC2134A5FB95EC0FD3ECA7E0F
+:104F500099F6AEA8F20FAD90E9236D5D0BBD073D4C
+:104F6000E1E4027BE0BB0F13B2344EAC3FE1B76526
+:104F7000B1F7057CB7AE57A438E3F8936511D501B6
+:104F800074794F814EF12F7E23BF0E93DFC719F046
+:104F9000E3F4F2777F36F68AFC7DA31A81EEA183D3
+:104FA000FE32E45E1AADFF8A587ADF8889CE3BC7AD
+:104FB0008C47388BDE05623EE3D1CC003D6971AF92
+:104FC000A6CB007454D169E822FDBE573C43B0AC77
+:104FD0003FDD73F1D3C83421847F26E7D43494E3D2
+:104FE000C17E1AF84522DE8ABE55E971A520FEC1B0
+:104FF000FE9BA51577907F28D87F93D62B6A668F66
+:10500000C7F7DFE93A2F8CF76923F28BA287E2FA20
+:105010001D08C1FF6BC67039A6F0D5BA5E1EFF5DD4
+:10502000D75B6ACC84B456E6AB03B09DFAA0FD759D
+:105030009DF377A31F61DDB545116360BED6BD3B0F
+:105040008F3D81FC6F2E3566E177D7EE302ECC1F79
+:10505000A497E0FEA68CE1F272404F1866DFCB9772
+:10506000F1FA5BED7F3963E4F36CFF87EF7F6087D4
+:105070008F1DC3EDF025DC4FC2EDF0E07D4391C7FD
+:105080004ABB2E799D87CA63FE7748C05E2679ECBD
+:105090001A2351BDE4CEB9B16447BFBB2056320DCF
+:1050A0006D3F43B46B62F287B6AFE8716E9FE3A8C1
+:1050B00011ED1C8796FB491708F4BE99A2F7B99D1C
+:1050C00002E9E3EE4A9D1FEB2978F52EE07ED585B7
+:1050D0000E9D3F4C18D40F15FD71A0DC2E50B9A2C7
+:1050E0004F2A7A63AF93FB71178CE7E5B786B91641
+:1050F000E17C7DD81546F91326F17CC69C479300C8
+:105100005EF43D8111FFCBFAA442A7C1FAE6A5CE19
+:105110008C1BBED7B34DA64F85CF5283F843D9BF62
+:105120009AF339DDD7E1FE1D8BFBF77FAAF4F2E09D
+:105130007661FF7E08F16F461D12BE1FFF5BD1191D
+:10514000CA3EFF4AD60BFE5E59BFDE232588AF72EA
+:105150004E76B87DB54ED66F862B6FCEFF7AFCBCEF
+:10516000471EDFDF8A9F778EF9BF439F1DD00BF567
+:10517000A1C7794741C94FC6C0BC866B3D749E73B9
+:10518000B8F7CD1E95F555B07355747C3445AF41D5
+:10519000BBC85DC3FD03CDD1D2AFC97E39AEA5F783
+:1051A000571E92EF733E78D54C692DEAC9902ED9DF
+:1051B0007B92DED95D52A3C6BF197DB7F8FDAA3434
+:1051C0008AEB57B132F22B5575469BF1BC7F737C4D
+:1051D000FB31E42BDF6EADB43BB0FEC6D1727D2354
+:1051E000F7B7D544D3DF8F61417A40952758DF5711
+:1051F000EB0553643FD170FAC12FBAC3B85CE9D153
+:10520000129FD739F9DF55D07772B9E06E0823BF06
+:1052100009DA6B88D7670D821FDF3D5F29D7FB4C0A
+:10522000EC25FF13C5D3A0CAB9CEA72C0EB2DFD48C
+:10523000F1A395BB7E4B7233388E1473408E0B0DE9
+:10524000C48D26D2799095604FE29FBC724BD25D9F
+:1052500038FF801FF393DC71A8FC30977A3E22FB65
+:1052600073C9EB3CFE33247ED43C93C78FF0DD95AD
+:10527000107EC8A5238F1DC5BFA374B3B8515DC7E9
+:1052800049BA473244FF08D23BAE8D51FB19478AD9
+:10529000DC8F3BB25330A37F6AA43C8F7FB7319C35
+:1052A000F4EAE97FA88E4579A0ACD3F9B97C5ECF4A
+:1052B0007F70A504BF9BF807D11C06E3FAC507F56C
+:1052C000BF49E2B06494F0BBFA08B463CEFF6175E5
+:1052D00004CEEB2F20C5BF2FF1DA6931A43FD22BCA
+:1052E000CB2DD80FA30BC8BF2CFBA545D80F230788
+:1052F000FD39C1DF6D97BF6B063385FC98AFF3F8BE
+:105300007E73826B26C1CFA633FE1EA683FCCEFF22
+:1053100002748DFEA23C182CC69F7F1ACED661BCAB
+:10532000A839DEF536F1D1B31A09F908BEA73893CA
+:105330006FBF44FB234E19C6730AF4FC5D46EA0CAA
+:10534000D66BB4BC8E0960C7623C09B05980F1E6E7
+:105350003C39AE5310CE446CFF499D6B13BE97F998
+:1053600064B7685F4B4C608FC577BF83E34B828324
+:10537000C7C5953893121F1F2ECE24603F059CEEA3
+:10538000F8B91587807173259EC4BEE7A4205763C2
+:10539000B187CEF73F53C848AE7F8B719E25F92168
+:1053A000E24835C86324CFD571C54D39AF109DFE95
+:1053B000B5F1C43D63D8B71CFFE2F3138CF7F8E8EE
+:1053C0004B16B2B7BEFAEF51B4CF765EA6FDF042EF
+:1053D000BF41BE8FD0C7FDEC9D3AF22F5C00BB2DC4
+:1053E0003E609F3D9ACFDB3DD43995E8FF406F5931
+:1053F00004D63F2FE76F7C77C1FCD94897BD22BD0B
+:10540000078BE7E3D00E3BD02B4E40BDE55B5C97AE
+:10541000EF8F09B12EC6F0D0EF4CE4CB7C945FC087
+:10542000E963EA07DCFE72D7F3388A59960BEE720D
+:105430003DC9C163291641F19F5B43C5595EEFA782
+:105440007DA36A8540F71CBE719CA5A35BDEB78275
+:10545000FCD3E5D3496E0EE7B70E889BABCAB715F0
+:105460000C9C8723FF75548199C61DE3292CC1B379
+:1054700087CAF8BFC575B8736C083AFB16DB5F695D
+:10548000FF6EDB9F92F7DDB6BFE63B6E7F6DDE778A
+:105490001BE7DEF11DE37FF53B6EFFCC773C3FAFB2
+:1054A000E5FFFF73000370709C3FF85C4070BCDF49
+:1054B00070FC3E1F966D1036F777416A8C7AB542C4
+:1054C00000512D46EFA27708664DE271B08D65461A
+:1054D000FF0E61F07C80325F4B0BB91D61CEBFE8DF
+:1054E0008B85794E75F496C5A29F6C127F87FD82DD
+:1054F000FCCE2A13CDF4CE18D44CC0FBF1CD61A163
+:10550000E3AA61727BC3ED23CF1796DC31369EFE92
+:105510006C43C8FB1D2FC8FE47730723BF2413A588
+:105520008479D4AF9480FAD088233C3FAA8B397613
+:10553000105E52DA3CB207A534C46F8B1CEF8D9914
+:10554000999D86FEE818D00B311EF814C605298EE9
+:1055500065A67A4A7F1F8CE5FD6DD13181EE5BE552
+:10556000F2F34CACF9A02A9EF78EAEEBE36502C5D0
+:10557000F39623FEBFD274E5EF4C938918E637FF0C
+:105580008099E28C2726BD487F775689EFAD31F3AD
+:105590002A87D16E063CD61C1C47F4BBE4D0A4F786
+:1055A000F1E93377A6680F754F51F1179C96FD1DF1
+:1055B0008ABF40896BFD5EF6937C88FE17BA1F2276
+:1055C00051EA1DABF9B6F727EFD810FCBF45E0FE56
+:1055D00021DFAFB87F689CDE9E11786E72B33CAF5E
+:1055E000CBBA78DC42F1F7EC93C733EE116D97013B
+:1055F000F6D2714D63F4B8CF8F6B4A09C7B4C0E1DE
+:10560000D7E07DF0C5D5FB35CAFA85A2A3D6B1B2E5
+:105610001FA3A79FE27AFF1214E7FF602C3FBF3061
+:10562000AF90E3F101D82408AFC9121B517D1C7162
+:105630008B591B2A9E54057631E2B9AC99E3ADCC67
+:105640007755973415FB3973B4BF09D3A29AB4A91F
+:10565000E46FAFBDD884FA9BFBDAE563B793BF4C28
+:105660002FA13D714F9FDAEFB60AA3A5F18427FD64
+:105670009D5ADF0C91ECE3713344A29F98AA30B29B
+:105680005F63744C6B42782ED78B8ACAE3A622CC18
+:105690001644933E58D42345DF973FE8078B995132
+:1056A0001F8FF374B3F8AAE24FBB35CCF11AAEE703
+:1056B0005F1B5F5DF9CEBB74AE541997322F4A9CC5
+:1056C00074B8F8AA72CEC15D7E45752EC32DF64F13
+:1056D00047FFE3B88367F4F2394B33FE1D6125FEC3
+:1056E0003AEEF58B147755E2AC6ECF45D2ABE13B89
+:1056F0003D7E3F0E963F2106DF17E2F1D757F19E20
+:10570000941EEFFF99E9BED41BF2FDC54E183FE68B
+:10571000BFE9CDA1B4CB6BA7F490B7985277E7451A
+:105720008AD77E38561DEF53E27997B4CE3363D5CE
+:10573000E723090E8EF769C3B9BFC6DDA3A3BF97E0
+:10574000E17EC748F2BBA47319DDEBFAF2A46B2427
+:10575000E25D87F1B600BA38EFB087E13B61E79DC3
+:10576000F6308CB38DEB3EA7C7F32F7562AF1EFDED
+:10577000618071121E4D741FB8C8CFF77696D0DFC6
+:10578000E3BA695CACE36F1317FB9FE541012100AD
+:10579000800000001F8B08000000000000FFB5170C
+:1057A0005D4C5367F47CB7B7E596DF0B2A3F227256
+:1057B000C16298A2DCC240A7311674AC135C8A4A5D
+:1057C0000201B5662E92092DD9CCC2CBD23A8901FD
+:1057D000DDC3B2B864F3A92683E8B687FA93AD6E49
+:1057E000550B0B84252EE2C39C71C9520D3333BA7D
+:1057F0008162DCD85CD839DFBDB5BDD8BD2CDAA458
+:10580000393D3FDF39DFF9FF0A003007DAE756B9E3
+:1058100006E74CF8A5CFC6FF0F3DA44F8CE3DDBDD6
+:105820004BEB2617C4F1BB3EC9356903F85D9CCE2E
+:10583000942B00F687CE5A1C041FCFAC7621FCEDCA
+:10584000C2DFB54A3A80F7D24C2D20EEFD66A6960F
+:10585000F8DEAFD27A02E94FDB7BD78E975E047019
+:1058600096416B10F9552EC17182E0B8C3FA4645D6
+:105870005C6EC02538E9FC80AD349BE8C75CA5D9D7
+:105880007B13F4F539456700E939AFDAAC89F409DF
+:10589000BB19A006E90C5CC124F66B5581DBDF7FE8
+:1058A000D22A4F4A7A1CF1DB1DCC36E0DE50813C17
+:1058B000591EC7F7D38F02FC6E6622D40274E9B971
+:1058C000B86472D7AAA8AF3B3F6A8152A24C5B5C16
+:1058D000AB305EDF4BFDAC1260F8FCBEE268051732
+:1058E000952017A04D3F37E0DC5B9CB110C07F3D99
+:1058F00005CA98461391DF4A3F148E2A22DA69A717
+:105900005F78E5B6FCF7274CAB11BACDFE68C2BD97
+:10591000DA9D82C39AC9ED2E6DCE207931CE2F212A
+:10592000A5D34BB7AD22CC5128E413F417C25A02C9
+:10593000D2A8AD366EEF06047EB0A17C9B5388A43E
+:10594000A09DD6704A04506F955304DF8B087BCD21
+:105950008112467CF126E72B6F3611BF4FAE2A0429
+:10596000F4E3E7CB16794109BFDF6434218EAAF353
+:10597000D3FE523CAF763195DC6AEF34F2F19341BD
+:105980007EEED6E3B23334FC7221F75F36019ECB54
+:105990001D03388E7677F618CFED6E75DE61743F95
+:1059A000F8A07F33CA814D900789DE6B94A33A3B00
+:1059B0008DF11F007026D64337D5410D41C6E1E772
+:1059C000E813D54515062A58113F37BF7E4674F9AE
+:1059D000F9FA62F00CF117517D560DD828BF4D022F
+:1059E0009401E1F5922D419F5F15B99E0F6501FC71
+:1059F00028D717DE3EC8307E7D8F5F915A506E4AA1
+:105A0000AE97CAD2E3B8F732D6531640F5F06C031E
+:105A1000C5FB589881154D79F3F1BE28577DB16EBD
+:105A20009CAD4EBCA7E6DF31CCF9443AD5819A0D46
+:105A30009A5F2061BCFC17586010ED55353D1C493C
+:105A4000A3F8B9B2D53285ECD80EA523EE6D126B52
+:105A500018E12E3C40F80E1690F0E7F62B9D5B0007
+:105A6000ED54B7D8AF52DC5B3ACCAA1588DEDA40E9
+:105A7000F46B5950372912FFC47BA9C42F67AA556C
+:105A800021BEB39EF88D5F4444AAE7AD14A56578A6
+:105A9000B7CB288D7DB3C1EA0E501F5537A311F443
+:105AA0006F47873540FEB5849BCD90CEEB41A0BEBD
+:105AB0007B5BCFEDB7458F32A3489F095767915F56
+:105AC0000BCCD316156135EA2EC84178E1BE05B07E
+:105AD0001FBCE2B44546B9733E4CAC05E04B9FC4D5
+:105AE00061C827836339C0D7BE7C0EC33E85D32FE0
+:105AF000FACA398CF8540E477C6B35A8CA3C9E957F
+:105B0000E1FB02DD27A75970259B6F7EBD3E62F940
+:105B1000AA0BEF29A67B3EBAEA2E9693C8C7205A55
+:105B20002C14D66AFDC930675EE7C306B2E381E88C
+:105B3000613AA760BE610D46218430EFBFEB6FAACA
+:105B4000529B6FD902B893F167F4FA048722D03CD4
+:105B50007A4BD2FA7F78C55F3C9E5248B9B21EF3A9
+:105B6000E61937410AD28FD46B737FBE9EEB184F74
+:105B7000C0B8DDC078129CCF6FB5F8CB281FAD74CC
+:105B80008F24E7A7F4FAC40A30BB32B49C32BC4F6E
+:105B9000476C0E6020B2308F1D211649C53EDF19BB
+:105BA000DE744724D8C3E096717E3CD77DD8E646A4
+:105BB000A589F3B6338D26F9135C4AD5E22C593406
+:105BC000D86FD5F65A935D8B730C6EB56B75719467
+:105BD0009A05EBFBE879163888FDE7A918BB4E73E8
+:105BE0002CCF01D08BC3C7939F1E31D13C0F99EFAF
+:105BF0003D99E3D81F798A0C1D3994370C26F6415C
+:105C0000817E0724C06D9463911C616E25CA2D1995
+:105C10009F257D9FD8156E2F77579001BA5004FEAF
+:105C200083345F462D50771AED779D637090FA3B71
+:105C3000E00205F7FDE8F11B874F21DD738EC9B443
+:105C40008EBA8357F99EEF162778FF78C2772DBC5E
+:105C50001E8337357A88390249F23A40FB1DED6ED2
+:105C6000467F686E741F300552D06EC339ADAFBD2C
+:105C70000E4B40417CACE81D91F09DE719E4D11C2E
+:105C8000532616A511FF80190225DCAFA6BA84FDA4
+:105C9000845F85FC8EEDCFD8FEF1C0F45821D56B22
+:105CA0002753230ADF3FB78CFB052F921BDF2FED15
+:105CB000A16133CD1BDC4306B9DD8E863B343F71D9
+:105CC000CF18E94B0EDFE7F98028AF53DC2F067EB3
+:105CD0008D3D63E16D2C095809157338CF3655CACF
+:105CE0003CDFAD6EC6DC181F497075919F7091C97D
+:105CF000346FE7C7ABD1AEF541A39F412FE677C81C
+:105D0000A2D5C7D03A16F0A37C23A294F7A18B7B2F
+:105D1000FC0CFD1CAA62AA40F120218CC7163D3E56
+:105D20002F801F6E4BFCA9706CAE1AE035AC612B56
+:105D3000D653A35E0F00016EA7F9E3D408BD238EEE
+:105D40009A83F92A7F97F8F97D6755E0FCD414E827
+:105D500049D6AF6BEC75B36A0DC93DF3F7D32E7B13
+:105D600092F7D347F876223B7BED4C24BF30BE2B15
+:105D7000A9BFEF155DCB1C41F481C9B58FCE755914
+:105D800022ABA9BE1F98DC1C8FF191EEA1FD828B86
+:105D9000EF16F591008CCF8723E567CC949776A218
+:105DA000C7EE5B1297E3B8E969FCA10ACFDAEFA16D
+:105DB000CA9AA7FD7E86FA17ABCF577F6EB2BC1D7D
+:105DC000A2F997A47E7ED2E71FC01299F7CB933831
+:105DD00083B68764E0753CAAEFF57EA6FC487BC8D5
+:105DE000FF9D190695F85CEDCFD0F47FA6EB8BC133
+:105DF000511DF69B35B9F9F627F439FC8BC9718A28
+:105E0000EEBDF2A4004A82DFAB82A9A024F85D199E
+:105E1000CA31E0F6C862837CF578A9815F33B1C2EC
+:105E2000C05F73BDCA80BF145D67905FFF6BBD012B
+:105E3000DF30BDC520BFF1CF6D063CD6BF7558B968
+:105E400089E73649AF1BE40A3B8D7E15F518FD2A1C
+:105E5000EE35FA15D35BE237FAB7ACDFE85F4EF602
+:105E6000835C85DEA1FFFC9149FB60203CC3F334D9
+:105E7000359D02133447C4A8B61FC266BE17A6F0EC
+:105E8000FFE2A2843C2CA7D73FDA19092FB3D2B97D
+:105E90000F9D362BBDDB2E510D603EFE05D7762EB5
+:105EA00017E00E00000000000000000000000000ED
+:105EB0001F8B08000000000000FFE3E36660F8515C
+:105EC0000FC1D3B81818367221F84301B7334368AD
+:105ED0003E16060601207EC7C8C0F09E91043338E6
+:105EE00010EC7E20BB0A88277150CF7D43112FE52F
+:105EF000A19F5D5FA0763D1518787F83B083100366
+:105F0000839B300383B40884BF5F0455DE5108C10E
+:105F10007E2E41995D9F81FA018DEBBB318003009C
+:105F200000000000000000001F8B080000000000BF
+:105F300000FFE57D0B7C54D5B5F73E731E33939976
+:105F40004C260F4242004F08202A842140088838FE
+:105F50000990068D9A080888CA000142483211A9A2
+:105F6000975E6D672214D16A1B2D6DA397DA0141EC
+:105F7000A3450D18E840031D4C41BC5A8D0A4A5BED
+:105F8000B541313C0A4978E8C5D65BEF5E6BEF332B
+:105F900099736642A2B6DFFDBEDF177FFE36FBECCB
+:105FA00073F65E7BADFF5A7BEDB51F2359C613D345
+:105FB00015847C057FD71372482484F4EB4E3B0B89
+:105FC000683A8E107F8E39B0552024B4EFEFED245F
+:105FD0008590B34DB355732621FBC79843D7D3F2B1
+:105FE000B381FC8099964FDD79C421D17CD54E5187
+:105FF0008272D33E2B7EDFB1510840DE6B6EFDF125
+:10600000B534DFB553249B69D5246437915442DA03
+:106010002D84FDA9F1985F6A65D9AA4DFBEF82F640
+:10602000CA836662A5DFB737896EC8AFDC2A040869
+:106030006DAF6AF783CA005ADFB280D06855697EB7
+:10604000EB638A1A4FC803FBFEEC68B31372DA677E
+:1060500021AA82FD286F1C494845607BE100FA7D3A
+:10606000C536C165A2F5576C3CD701F45534C9C398
+:10607000445ADF8A061B5147B0B6BF22D05ECB0719
+:10608000D8DE4E7928B457FEE53D0A11A19FB21B18
+:10609000BEABA27440BFB5764FFBEAB13D8D9F55B4
+:1060A000CFD1F6E87BD52F0A2EE862B58978808EAD
+:1060B0008EDDD6B94FDBA17FB5CAF0F8C87E2CDCE7
+:1060C00005FDA8086C520AED40DF2665E9C8EEFA26
+:1060D0005634FC879EBEFAACFE9E8872637ADA471D
+:1060E000593ABC3B5F4188BB91D64BA480523AAA37
+:1060F000FBF907422221E3A17E91A896EEFAA9E4DA
+:106100001107FE23F49F940FFEBDF181AD99DD725E
+:106110005BE9049975CBEDBC93CB51EACA8DAC5FBA
+:106120004B7F0CF2A0F4D4F99C983EEE4BC37483E1
+:106130004F45BEFDDC3702D37A9F0B9F3FE9CBC3AF
+:1061400074A3CF8DE953BE224C03BE127C6FB36F94
+:106150002EA65B7C1E7CFE8CAF1CD3065F0D3E7FA3
+:10616000DEB71AD36D3E3F3E7FD1B71ED3465F1DCB
+:10617000A63B405E346DF205F0BD5DBE064C83BEAD
+:10618000467CBEC717C4F411CE47C764922F513E58
+:1061900038DCC449C54E928ADDF932CD2795B07CF2
+:1061A000EA1DFE7C85E6533D344FF932A032946FF0
+:1061B000A6F90135AC7CF0FDA4C042F383FDAC7CB4
+:1061C000C823EE022BCD0FA963E5C337FA0BE268B3
+:1061D0007E7880955FBD2D5460A3F9AB1B5979760D
+:1061E00033996AA7F9EC10CBE7BCE19E1A4FF3395B
+:1061F000AD2C9FFB817FAA83E673DBD8F793CE0497
+:1062000044D51E2D871DB2BA9850596DF4CF704BEE
+:1062100013695E51EF212ECA1FFFAD6E299DF24317
+:10622000766379C83F1FCB9B143796BFE32FC3FC1F
+:106230002ED983E5C7FD552CAF78B0FC73FFBD9810
+:106240000FCA7E2CB7D4FA585EF163F980DAF5589C
+:10625000FF1E3980E5236B1FC3F23D4A00CB1F5F51
+:10626000FBA47B1ACDAF113C3F073CD2B49C640128
+:106270009E1AD34A289ED609642EE0F707003A8A70
+:10628000CB75E90AEAE18E3FE43E0DFA8B7F299057
+:106290005FFACCC399F8FDAFB01E99D623F65E4FD6
+:1062A000CE9B79BA7A72DE2CD7EA6980F7D658FB92
+:1062B00056CF8E3727E9E979B342AB673BD213DF7C
+:1062C000B77EE5BC35594FCF5B955A3D7B909EC458
+:1062D000BED1D37444CF9FA62361FEB4203DFDFA06
+:1062E00046CFB8F7F4FC19F75E983F6F603DE97D43
+:1062F000ABA7E93D3D7F9ADE0BF3E708F66B50DF75
+:10630000FA35EE7D3D7FC6BD1FE6CF47484F66DFBD
+:10631000EAD9F5A19E3FBB3E0CF3E704D633AC6F40
+:10632000FDCAFD48CF9FDC8FC2FCE9C27AAEEA5BB2
+:106330003DBB3ED2F367D74761FE7C81F58CEA5BBB
+:10634000BF72FFA2E74FEE5FC2FC310950CF98BE8B
+:10635000D113FC54CF9FE0A761FED8B09EF17DA37E
+:1063600027AF5DCF9FBCF6307F520490FBC4BED5F3
+:10637000136CD7F327D81EE6CF20ACE7BABEF52BB7
+:10638000EF849E3F7927C2FC198EFDCAA77A0FF4CD
+:10639000105A4F7CCFF5EC39ABE7CF9EB361FE8C42
+:1063A000C67AA6D37AB27AAF6752879E3F933AC233
+:1063B000FCC9C37A66F4AD9E3D1D7AFEECE908F394
+:1063C000271FF97353DFFA35A953CF9F499D8C3F9F
+:1063D000630FD74C75D0723A16BA44FAC9B567DC68
+:1063E0006E81E64527CB8B4E1701BF44D4FC0DD2FE
+:1063F000EA16E9F7F66D89390F9348BFA3A014FA9E
+:10640000154FBDB148BF23212F4EE7E724BA93743F
+:10641000F9E4A201BAF7FB950CD195F79F7BB5AED5
+:106420003CDD93A3CB67944FD2BD3FA8A64097BF56
+:1064300062F50DBAF733FDB7EAF259EB6FD7BD3FFE
+:10644000AC6E91AEFCCAFA0A5DF9558195BAFC357D
+:106450000DFFAE7B7F54E303BAF2D1C18775E563CC
+:10646000428FEBF2630F3DA97B7F7CEB665DF98485
+:10647000A3CFEBCA27B6EDD0E5AF3DB9C7E0E7D96A
+:106480009DEDD7F0BC08B827CCEF4F57D0DF0BC538
+:106490002B985706D8D18FDF1FBF543D4EE5ABBCBC
+:1064A000B2584DA1F20599123AAEE70F28BFB28D4E
+:1064B0003EBF7792E74A277D7EAFE219ED8CE19FE0
+:1064C000523C08240D52D504A9B1FC4199E1B120F8
+:1064D000E3CBE1C7E8F75E53D7F0449AEF2FE6D756
+:1064E000035E9E124C88D33891D4C07B716682F3D0
+:1064F000820733739FF647E075FD20AA874277BD78
+:10650000EB654F1AF8199B6BDFF6831FB26E10ED27
+:10651000D700429E16DE0EF987D2EF072D4DF3D03D
+:10652000FACC0AF5D323DB5768FB23B1FD0668FFDD
+:10653000C51EDA370FC9D3B56F195CAE6BDFA2D0B9
+:10654000F69DD41FA8FD236F9F0A6112212F0B7F98
+:10655000C4F6CD83CBB1FD07153A5F896C3F2EDCC5
+:106560007E10F4771FB43F3E46FF874CD2F77F7012
+:1065700085BEFF0AEBFF2BB5C778FB71D8FF16E18C
+:1065800018EBFFE00AD67F33AB37DCBE23CCFF43EA
+:10659000D0FF377BEA7FD6647DFFAFA8D4F7DFCC8E
+:1065A000DA7FA7F6146FDF8EEDBF2B9C62FDBFA2D2
+:1065B00012DB57CC1E17E047C988AB09D0F6C9409B
+:1065C0006A98FA035C683B908E48A2A026E4516169
+:1065D00008D2716F1CC3DBE771146F686FFCF89C05
+:1065E00004A865CBA5F32E8EF515DBF215B04B583C
+:1065F0004EE72B4B38A9654111F14D369803C3285E
+:10660000BD1D41D10FF9B20DD705C0FE79CD644152
+:10661000097C2791103CFFF467A33647F6CB982EF0
+:10662000A993DBDB22F42D3C8F2A20236A287DD31B
+:106630000104E3BBF31FD37910A1F38B0FE83C8374
+:1066400050487E22B3F63EA2F325C8B7D1F9129482
+:1066500013528BDFD1EA0EA751FA4B38FD1F4B4C7A
+:106660005F3FBE4308F8A97E7EFEBD31384F5DB066
+:10667000DA4699DE4DC7427FB22E4FFBE5073975EA
+:10668000ED3607360BC85F15F8558AAA49C8E2F5FA
+:106690001994D7DDEFBF4FC59E4E597F1B71CBFDBF
+:1066A000E9FB77AE12063969BBB3DDE61C364EB89E
+:1066B000334CA8D724C39447C8AD4D63645A03290B
+:1066C00075CB1FB745B43BB3489F9F5DA2CF77C83A
+:1066D0006ED944E9EA2815C8265AEF9CB9FA72AD7A
+:1066E0001DBB2989C999B75792CAE89B03690E3C1B
+:1066F00076A29CE73AD9B71A3DDEC5329DC2823CEC
+:10670000FDFD08C8D59F82EFDDEE64FD36D23B5714
+:10671000B6B84B683FE72E1403806F23FD7FDA671E
+:10672000739BB269BAFEA7323145F7C748FF3C8F69
+:10673000B13F8D328CC3F3CB8DCF196EDAB9FC3FEC
+:10674000067CD0F404E083D27F9CE3A3DBAE327CF2
+:1067500078CD9E9B010F5D4F8804E5CAF1721BC77F
+:10676000CB923A3D2E08F1C820C76573859C8723DC
+:10677000703087E36059BD1E377712BF9C1E432ED1
+:10678000F3366CFA619A1ADDBF0F396EE63FB21F1D
+:10679000F913DD4F26A7BBB89CEEACD197DFC6E559
+:1067A0007A2797EBDCFAC70E50F3416E570332E8B5
+:1067B000BBF73E4D9E6D3A797AB83C8D74DEC5E5E7
+:1067C00079D7F7983C8DF4B67179B6D55F90C990BA
+:1067D000687A8DF42D581DD51F05E4B9D01F5B9E36
+:1067E000DE607EF2F188E7558D33928F47E8D98AD3
+:1067F00086525D7E79609EEEFD65F50B75E54BEA90
+:1068000096EBCA17AFBF5B975FE8FF9EEEFD05AB47
+:106810006B75E577D63CA42B9F5FFE982E3FCFF398
+:1068200084EEFD397337E9CA67973CA72B9F59B4AB
+:106830005D972F75EFD6BD6FDA77D52D80CF378E68
+:106840008804FC89CF5C27302EF8994B76C13BC772
+:106850007D2AE2BADD3702D3933E17E2FEB42F0F52
+:10686000D38E608B1DC6093A2E2E2589D4CC9B6E03
+:10687000AE5D3F10C66982E3E916D3AC5AFF6442AD
+:106880007E6D5291DFC5F50A098D254480C186D3FE
+:10689000D1254694B7F5525E4F0D7F727479715BC6
+:1068A000ECE7DEC7175EE18C1177E9D65392017EE3
+:1068B0004F27F7BB8DE5950229897C4EC803A8D7E1
+:1068C000E7F8B85BA930FDAFDC915E401C900F0D7E
+:1068D000AFB95C7B8D14E4FD0127593A3D5E567FCC
+:1068E0008DCEBE1388CAF603BC8DD53D5FD170AD89
+:1068F000EEBB33FB45A4BB1A6CC54418164B5E3780
+:10690000811D0EB50C9E390AE874BF6182712AD8C8
+:106910000FFDC233BEA2E4E312C8AF04D393BEB9E5
+:1069200098B6FB3C981EF79563FAB1AF06D336DFF5
+:106930006A4C3FF2F931FDC0B71ED33FF9EA303D52
+:10694000EAABC7F43D5F00D3C3BE064CDFF135624E
+:10695000DAEA0B62DAE17363AAE95D6FB83BC9C793
+:10696000E1D380BF1838EB786055EDFAC9DD383BCC
+:106970006FBAAFD63FB09BCFC5F5668E87541D1E4C
+:10698000BE806033E2AC97F27A99E3B0A7EF6397E9
+:106990007B37FF6BF036DEC4FCCC6F8AB76E3C658C
+:1069A00018F094D51B9EFA89E3BBF134DEE4647ED3
+:1069B0000FC7D38FA01F31E61505E084F48BF0D705
+:1069C000DC3616A7E6EB09D45365716ADEF61AFACF
+:1069D0006E2BFA758111306E9C1FF1B7E110873F65
+:1069E0007FD44C277D3DF7CF88939EF9EEC6F9CD35
+:1069F000D2001DBCC646975BE3185FAD265244E843
+:106A0000B8F6D0B0675C8B46625E2249F07DC05517
+:106A10001A1FA35EEA2B037F7BE3EB9AF8CFB3A1A7
+:106A2000BEF627FF9E0BE97813F397E35A44F4DB95
+:106A300049E86917F0373C2E995D6910DFEE1AA618
+:106A400038D16F08D8F5FCF3D37C6E37FF1EA23C1B
+:106A50006AC571B72E0DF937F4F3E1E97DE05F6F98
+:106A6000F6BD377E2E0A0CF897F0B337FBD89B5D46
+:106A7000246EF5C520ED7FE7BE51390FAB60078767
+:106A8000B0795A0FFCD6D6A58CF47CFF6BE2B833F4
+:106A900055C371EB6042DBF988EBCBF9A62B1340B1
+:106AA0002EB41E9C1F74EDE47E7E2F723D9BA9AF19
+:106AB000CF6BAC2F4121C268DA6EBCA29004426A4F
+:106AC00044CFA322CE6F5C6D7E881BECB3B9D6A8F1
+:106AD000306F3CFD6648851AF5F185F3879E76C0D8
+:106AE0003C6C659AC9793C861CB5B4AA31D3698FD0
+:106AF0009CAF04F5F9F375425123CEE7D48459A332
+:106B0000609C713A8F0F05BB9F86A956CFCA34C5CA
+:106B1000799CDADDD30D59096CFE1760F6645B22AF
+:106B2000DA9BD33E0BBEFFCFA6A7A77A347A0869BB
+:106B3000229F58C09ED3B2AC9EDFEF511FA48B0A98
+:106B4000C43749B3FC39CC37ADF4FFAF8640BD1232
+:106B5000E6B57ABD8DA2DF3C1A9E6FD3B547BF5311
+:106B6000B5B557F8AE67BD9348BB867B2ABF57F9CA
+:106B7000FAF08A06AB53EFC726EAF2DE60BA53E7B3
+:106B8000D7C23FC071AF1124C05F25875FA7645F84
+:106B90000F78DA0CC14398BF08ECBD2A4B9BE25139
+:106BA000515D5A019F8BF234FCAB73FE4CEDD4A9BE
+:106BB000D765027A46BEA454E5F2A920E2CD444C42
+:106BC00034BF98BFBDA86945318C5BA74C6CFE50A3
+:106BD000464A1C303F2E2775B9104F3D4B4C45A0FF
+:106BE0009F67C93B8EB111FA784E54B0D2C5EBF510
+:106BF0007E3C9DDFEBF2CBEAF5F9A5E4D6545807CD
+:106C00005FBA41260101EC86BEFC98E8C47A9791F0
+:106C10009A75306EFF9CC7BB1639899441E9ABFA6F
+:106C2000CD2F7317523A2E896CFCD5D67197273128
+:106C3000FA2B660514377DFF93A6B1B7510B44BFFD
+:106C40000FAC83756D7F29716D25D1F2FBBAF41BF2
+:106C5000E9D5FC81A8F5644E474A83E00EC4B063D1
+:106C60008A24303DE3F6EE6AC9A98B83E4423E22D2
+:106C70000EF28DF194427478DA2C7A064BE3197E89
+:106C8000000F82D4A578BE4DFD6951F55F2DF5FB4F
+:106C900027D63F90D69FABAB3FF79F4AFFD028FA4D
+:106CA0000B62D55FF59B1776F9A93DA978E9670EC8
+:106CB00042C7C953525DAA8BCAB572EB0F1D6E9ABB
+:106CC0009E94FC0EC0EBA98058144BDEABC3F27649
+:106CD000DB0588BBC13F69FDA79FFF11C6233EDFCF
+:106CE0002A3B319ED6600E99A93E56372D2F26D9C4
+:106CF000983FC6F20F9E13211FD4E3AFE2D99FA5A0
+:106D0000C2FE0A8A141E5F0AA13F5BBDE5D3421C86
+:106D10009F4817EA91F13B68FF5212DABF854A4259
+:106D20007439A513E3045ECE176FD38FCE890EF8A6
+:106D3000571BCEDF8DEF9773FF74B9149FD26EA3EC
+:106D4000FF9E4026803DD4F84102CC3F5DF3DC2F0E
+:106D5000B28F517ACE6C79DD2144F049D3A3F38D03
+:106D60008B7FB547EDD9DE76503D8BF483B4F14A85
+:106D70000D72BFBA99A59572C8712DD5FBCA4DB2D7
+:106D8000CB4F1F57BEF0F4334F421CF38F66D73002
+:106D90005AFF8A170EBC3789E6576C97538A5937C2
+:106DA000EC426AB75CBCF4FFD539DD72A878F98093
+:106DB000A28E62CFEF4FEA96C78AEDFB15322A9A70
+:106DC0001F531BF72B6DF61872693C56087EC29A4A
+:106DD000E7FE4B81F8E2A97D02E99F19839F9B0E94
+:106DE000A01F007C4239723985E56678DF4BE502E9
+:106DF000F65A9393B1FC466E4FA03E7524E2F9C556
+:106E00003DB4FDF23F995DD0FFF217EF71403F4E68
+:106E100048350CD7BFFC612AD8AF72D99FEAC49419
+:106E20003D2F7FEABB88B7656F7F3715E349C49D67
+:106E30006EC2B1C79F0EFD5BB27136F66F29F120AD
+:106E4000EECA7F29960468FA99448AB6C7D08B0E99
+:106E5000AE17273653478CF6EF04CC1FC15EBF2315
+:106E6000E2BE2A42EE26A0FFDFE57DA11E02E63F3C
+:106E7000B330391D904C5CAFA8B71989D72D0FB628
+:106E8000827C4E0F72F78775162F91FC9C1FC2579C
+:106E9000B45EF1EDE9FD997C882AE5F2EFE8383F30
+:106EA000159EC3FBADB2DB9AADFB8E7C95D9DDFEA2
+:106EB0002ADE3EA53B0EC6E713A9B1FDD501B2A659
+:106EC000F7749C8EC057847E337DDFF210D36F4DF4
+:106ED000DF03A545507EF130D31FF80EC63F4A5759
+:106EE000A83F96EF9F25A03DA0F3E6587ABD45E662
+:106EF0007AAD2FD77042E996848408BC40FD49C81A
+:106F00007F5C5F59BA817E17612FBDD09E23BA3E48
+:106F10004D6F9771FD3F05FA7F4DB7FE938D4CEF96
+:106F20007BF69FFC2C6E23079E7912F495EAA75FEF
+:106F3000057D954BA0DF7FDDD6F2DEED544FFFDA05
+:106F4000A8E9A9DE7E1AF5B47CC778124B4FFF6A18
+:106F50007791987A4A9FC7D4537B1BE2F8FF94FD40
+:106F6000D4F89728EBF9A7D9C39EF868B4872F4ABD
+:106F70002AF2D3680FE9DF61921B8D3F0D771ADE8D
+:106F80002A7E5D7505D89D302E35DC8571A9E12EF0
+:106F90002A7EABE39FB1FCCF106BA274CDB7D44F68
+:106FA000817984A58BE0BC2B7F9688EBA6968B0419
+:106FB000F5BE80C8B86FF07D53CD78F043A7FCFDD7
+:106FC000B6B3F7527AE713BFCCD6E5EB64F4EBBF68
+:106FD000FCEAABC9B43FB773FECEA7ECBE89CA6367
+:106FE000AE2484E2289DF324E24F4882F8AC403E70
+:106FF0008EA0637EB93E0F7F5352BBEBE9EDFDAF30
+:107000003B0FF9A6E9DB3EB676F52EA443B179290C
+:10701000124FA52057CA3FEF38213004ED529B5440
+:107020001231AF7A9CDB9DB7A7CD1C0FFE4BFE9CA7
+:1070300051090CE783717EEBE5F6EBBC5F4D00BBBD
+:107040007EBE390BE7AFE70F2D8E8FB56FB285E3AC
+:10705000EC005F57E9B40B7522C57D27E942FFC5F7
+:107060006FB792AD31D6FDBE2F9BF8E483CB8DFE7A
+:1070700089546E73390EE7D14F137222E436EBA6B2
+:107080005392235A0EF0F771C43CEBDBF217700DEC
+:10709000FC6DB1B61596C488D7FD84F36FCA2B5F1B
+:1070A000E0FED569CDF912F0719A5DD4C5391ED4D0
+:1070B000F475241909744D7965F9A3E3298EBD8708
+:1070C0004417EC57F5369F533C31E6BB467E42FDF4
+:1070D000E0471E909DC8AF2372C912E0EB91D956CC
+:1070E00002EB96EF2AAEAA58744E37B378C83C52DA
+:1070F000F2D938E1FF3EFEE6CF890F15507E9CB7EE
+:10710000B3FDC0D1F8637A7FDE29046A05C0A1C847
+:10711000F2294200E26485C4F3E86401F5FDFA480F
+:10712000FB951F2C7D01F6D554370B4E132DAF96D2
+:10713000DA14C0B137B85D02FFFC4695B831DE20E5
+:10714000D58C9A1511D73A204BC8AF96BFDD7E2754
+:10715000F0F7C22C3301BADC23CF3960DCBFD03C5E
+:1071600016F5A0A77EFDC147A64C93A01E82F8305D
+:10717000E2A130C5A6CBCF9E4A06BAA8DCA698DB12
+:10718000EE71C590DF3285E1ACCFF6CDF2FF997D8F
+:107190009B4CED1BC3B51C69DF462B51F6AD7F2C14
+:1071A000FBB6B256ED0FB858B937AB3FC875E56BB3
+:1071B0004BFAC5B26FAFFAD8FCFD35BE0FBB7320DA
+:1071C000B56FA323ECDB406ADF62C46DD315CDFF3E
+:1071D000ECC5BE59FE77F4EF55B06F31FA3B52D192
+:1071E000DBB7A2E65AB46F450345DD7EA82C85CFF8
+:1071F000E77AB46F0B7F361BF3B2CB16033FC05751
+:10720000B06FAF713B07ED809D5BA438B1FDBEDA76
+:10721000B9D2BEDAB9FF253E6B766EE520769E23A5
+:107220001A87CCCEADCC64766EE55E66E7560E630B
+:1072300076CE68DF0AA2EC1BFBBE7A04FD1EE78B4C
+:1072400099BFB8839617CF955D16FA7EB1AA9D5F58
+:10725000A8191F69EF162912F239CADEB9CEE13931
+:1072600090DEECDD5B60EF86A21D1B0A7A64C4C76A
+:107270000D436DBAFD7247BE68FFF54BA02F7F101E
+:10728000719EFDBE89CD8BF67DD13E16F46E37A77B
+:10729000E75185C9B3C3E7477B3A7524D3F7AA43BF
+:1072A00071384E543709ACBFF70B0115C681BF5D6D
+:1072B000C2F9F29D7BD97C798E99F183FC9BC8CE73
+:1072C0005D50162C8CC0C3DC4B1518D79C2B110BB2
+:1072D000F8AF0B0EDD700AFCD60597D6A3BFBB0036
+:1072E0009EC3BE89ED6DEB3268BB772E1770DEA1B1
+:1072F000EDEF9817B6977A3F767E73EC7D1A533888
+:107300003D53EE1302B02FA7B77D102F72FD9B23C4
+:10731000B621BFC85B62CCF8A4F65E984F2EC69724
+:10732000AA55CC6F0EF389F24D15A2F944255DBC28
+:1073300030B59B2F77EEA4FD4DE9B9BF1ADFA2F758
+:10734000E1B8713EB380BFD7131F343E47F59FF3BA
+:107350009DFAA9B89FC7C88F46CDCE5C4346815ED3
+:10736000BE6FF23C3A1E70F49F942F94CEDBE60D74
+:10737000D39DE7D9C5F97293E7D8B45415F8486A94
+:107380000067B7976F3F904AFB778B3B330742E626
+:10739000B3FFA67820FED062ED423BA8E130CDCC11
+:1073A00070F8578EC323039CD370BC090A4ED4AF28
+:1073B00090C1CEF17D645ECA67D05F6F908F4F142D
+:1073C0009FA09F85DA780572A1FFBCA999C9C55B0A
+:1073D00023A05C6E265D0781EFD529822B44AB2A62
+:1073E0000C6EFF21ECB77AD54A9F839E970BAECDEA
+:1073F0008C1DF6F4D498389662E1183709468C9BB8
+:107400000BE0BD24D8B768C6F6EFFC1EB347463F75
+:10741000658AB9F508D033E5DF64B2091E06E87F56
+:10742000113830FA31517AF035F7FDA472FBFD2A9C
+:10743000C8C10EFCEE52C01FF286D8F8A3957B257A
+:10744000751AF24D9343908E2FE3981C60A9DFC804
+:10745000E75BB43CE01FDE6F1664F87E06954F32A2
+:107460002D9A6AFAE2A08677B31ACD2F8827A4470F
+:10747000D80DB06F91EB96D5C1B7914F37ACA2EE56
+:10748000991ACD274D3E60072FC7AF28FD09EE8F13
+:10749000B97FEA9BEA4F9A59AF3FFBAC5DAF8F864D
+:1074A00038DA5E01ED0A694ED4C50FF2CC6C5ED6B7
+:1074B00062F520CEBB5E935D9BD568FB7315970B81
+:1074C000CC5722CFEF4D850EC1BAB1D34A3ED1FA87
+:1074D0003D84E12C723C78D5EA41F9F554FF045E15
+:1074E0007F4FFE9896FF0EB407FB16557D7BC6F1C5
+:1074F000488B27F5D6AF6966663FBE69BFB476BED6
+:10750000EEBA8397B462FC4D5B7FD82C7A7E2EC393
+:10751000FCB848D0AD7350CA71FDF29F50FF58E5DA
+:1075200032F543FC2844F9FCEAB6A7315E7DF6F952
+:10753000633783FEACF8AD482C549F3AB6C5931020
+:10754000DB07A2809F50D124E27A169142B93323FF
+:10755000FC0C42D6307EBC148F76A7628739504C23
+:10756000BFAFD8F54936C4DD3A1E60F6CFFF3CC741
+:10757000A3BF2D1BD6FB2B24B68E6F94CFBD1C9FB3
+:107580006776DBE682FD161AD879D78AC639B23912
+:1075900022CE506596595C7BB70DF759FB9F13704F
+:1075A0009F32D01779CE52DBFF79E63966972B826E
+:1075B0007200CECD56346CEF803878C55133FAAFB7
+:1075C000DE86730AF8A7535F7A01FD236F50D4C596
+:1075D00041A3E28F0D62C80CF1B3A62AB403347F35
+:1075E0000CF38DB1E3F0BDC5C956BCB477979FB21B
+:1075F00070C5CBCF3AF0DC6CEB5607C6211B2E1FB3
+:10760000FF8F8A37363E74D978E3698E8F5F99F59C
+:10761000EB35A42119E39094BEDC9218718B30EE07
+:107620005FF8EC29580F3BB3E3AF4F01BD95FFB8AE
+:10763000F0D47DE08FEDB33A61BCF63E7F04D71302
+:10764000B4EF76733DEF78EE595C87E9F8A3D9057E
+:10765000B575EC3D3118D6233AB67F910A71DB55EA
+:107660007BA7E33C6DD5CEA9FD498C798096026E4F
+:10767000037D580732CAABA5A96530D07996CA1BDD
+:107680005CB670FCB8B18AC5E3551E37DE167BBD0B
+:107690002D2A4EDC34F396EB60FC6E925D2AE943B2
+:1076A000BCF83095E3E83EC86FDB439ABD8F29BF35
+:1076B000B3F00F2AA7F70DF2FBAC69C9AF9E84B2F5
+:1076C000A6E41EE3C5A13EF04D5BCFDB62767F6C86
+:1076D00006BDD9F16B8CCF83DCE85C8374BCF0D938
+:1076E0006088B39C94BBEEC2FD337BCDB82FAA62F9
+:1076F000EFFBA83F1D3BDFC6F532C2D7D53A48F8AD
+:107700008FAD83F0399C774B3C8B3373FE431C5A0F
+:1077100075E0731E6F6638D6E2D03DC59FD32D6CE1
+:107720003F91B6CE58B5E5CF0A31C4F5853C90D32C
+:10773000B1CBAE8B6A7C70021F2644AEA7C48EF319
+:1077400087D7DDB8BC407EE07F85D74B687E20C4FC
+:10775000CF03C2FB24863DE8D8C4D6613AE4D8FB07
+:107760000FB5F595148B414F037D5B57E98DFEAF47
+:10777000CB1F19269BE3A3F974E6CBD8767C824510
+:10778000F876FB612A85A8F57F0BACCF371D5360D7
+:10779000FEA18D635A7FCFF079F299E7453CEFB1B6
+:1077A000AEB105EDB8D15E5413161F34D23B83D36E
+:1077B0005B1D64E3C4991DF1013BADE7CC2BBB110C
+:1077C000CFD5DB8E297E5ADFC1869795B688FD52CC
+:1077D000304E0422E83FF3E2FE6CB67EC4E6E5C616
+:1077E00076E6F076BCCDB1DBF16E3BA76B6785BF6B
+:1077F0005161E7772EDFDE69C93D07EA3BDD2A13D9
+:10780000D8BF7FBA512C0AC4687F9245D6E2F24CA9
+:107810006FE87889E71DE3D9F946314941FF7A5588
+:107820007CDED18414481515E2146B6AD9FED2357A
+:10783000DF77A581BCD724DE86EB6D7506FE3A5353
+:107840009CF910BF704E2B19077035DA9B44B7496D
+:1078500047FFAAF8A2FE701E7F2DF7C788E4C2F387
+:1078600097A2A3B008FA233A4D4E6B8CF505D95E6A
+:10787000423C117C919DFAF392E4CBB12AD4A3ED62
+:10788000A3A9B4B41EC442A71BB70A4B79ECDDFC14
+:10789000594EEC77E7363E4F7013D599CAF683C13F
+:1078A000B8D1B923219B8CC60F899BE2D1C69F0B0F
+:1078B000DBF6EF077BB4D641DC8954CF285755312E
+:1078C0000BCE8D8EB1085980D3736FFE96D66B6D3B
+:1078D0001671FED069D7F685BA1341CF6CE411DC7E
+:1078E000FF0750FE2AB99B4EE3BE4002AFA476DFED
+:1078F0002B315DB4E3BCE7FC46160710C9D5BF9831
+:10790000CCE2702400F4F3F16405A7F33CA4F07E0C
+:107910009982E73A96BDF6726E88303944F22BB9F7
+:10792000487FBEB4DEEAC8867579E277B7C2399976
+:10793000325E5FBF12FDB953AA7E7ED0D3255C4F65
+:10794000FFBAB4F010D8BF32CF52B4EBFDE7EACFA4
+:10795000A51AF75921BDB02F8CEADD9342F4BEABD6
+:10796000F2E6C7D6C17C397AFF151901FBC92A484E
+:107970009C0BCEE7AC68D097EF03BB7915B093D8DA
+:107980002F17EFEB95BF6DC37F3179DC65F9EB0AFB
+:10799000C1FBDBE231AEB2ECB5C5689FCC697AFEC3
+:1079A0005A553D7F6D238C7CD4F339DEA5E79B3699
+:1079B000FFEC89CF0979FAF3BE463E4B84C71B0220
+:1079C0002C0E11B5BF2DB809E936F2D9C8D7760B00
+:1079D0005FF7E27CA57F25965466B281EE74298418
+:1079E0007A61D4A30C7B48807F0F4A09D4E257AE5A
+:1079F00078B4EF69BC3F4219FBCE067A2402BD2E53
+:107A0000D42338D10776DE463E70B65B41589F904E
+:107A1000AFAEE9599EF794FEFED822FAD546C0EFE4
+:107A200068D42B766E378904D664829EBA9C306EF9
+:107A300037FA2C6A9904F79F10B56C28DC7BE2C4F6
+:107A4000F4C77C1F4AE74882FB821B431753C13EA1
+:107A5000FD38A7EB66B07BDE25A404ECE0CD716CAD
+:107A60009EB298A77FB72ADCAE4E7BED7AF8BE595E
+:107A700056E15C7867F356CB30C80745BC7FC49BA2
+:107A8000587715B4DFD12C33BACA2C816110BFD816
+:107A90002B63BB1D6593F17C65D86F6B66FB403A29
+:107AA0009B3F712C8EB0E71DC19F5E05F1AC274C4A
+:107AB000B1F79F0CB79AF8FD35DF70FC6D8CDA7F5B
+:107AC00037DCCAF6C7FD7808ED4775E9793E0E3315
+:107AD0007DB896CBF9F74B6FC0FEEF6C1654184784
+:107AE0000AC53B6E1C45FB39F188C4E3302C2E39A6
+:107AF0008EBFBF9BB8D2801F13AF2302E8F3C43FF1
+:107B000012DCB735AE6629CEAB7EEBA038CF8675DA
+:107B1000528A5BB07367ECE8BF8F6F9574B84C9C6A
+:107B2000E6698179E684A304EDED84A3FAF23C12C0
+:107B300010B19D36FDF36B4FEAF305568E6F074982
+:107B4000057C6FF85244BA3ABB88EB015A6F67D98B
+:107B500000BCEFA6F3229CDAA5E9976251AC717ED6
+:107B600026E081F2EB0985E0F8F2C4523BC6EF5FF4
+:107B7000595A71058CEB9F7FCF7345AC73E011763A
+:107B80002981EDAF722750E229AED70A8CDF75E963
+:107B90002531F6EB6B38D670ADE1397D699C27D67F
+:107BA000BEC40FADCC0F29583A4250605EB64F208C
+:107BB000C0D78E073C973D37E3270F64003DDEE0DA
+:107BC00005F4B32DCD823B969FB1CAEA60F3BE07A0
+:107BD000FCB5B01FEF5EAA94601F7BAE7703CEABFF
+:107BE0006E87A02B7C67A95B88E7709758C866886A
+:107BF000674B75E9B7C603EEA7CE5847E97DB2C417
+:107C000084727E427621FDFE2A4230BEC0E3B50377
+:107C10006F269B22CF23FFC09AFFB095D6FBB0D52D
+:107C2000897249F6B804A0DFF5DFFFE500BDEEBCC0
+:107C30006446390EE0F31FEDBBAD9C4FA3E3DC6B54
+:107C400001FFA43C05F5C3E571A865C9702F01E5E6
+:107C50007B8C7554CD2F4DF250DB46E949B29BF039
+:107C60007E2EE276AB4E6DDF19E1EF45E8030909A0
+:107C700004F6A569F654681642F114FFE32CF610D9
+:107C8000CC3392CA69BF2909566261F5B54A67C209
+:107C9000E7AA719F3BC5652E1C6E22B8AF0D36D288
+:107CA00042FD9A9DD5ECF3DA4482F666ED635260AC
+:107CB0000DAD67A3D46685F849A65B2D80AD444918
+:107CC000928AE7BD0795337DB465FD3231ECAF5044
+:107CD000651FF30F7141ACF5BA8FC3FCF2BC00FC19
+:107CE000CA3ED4F50AB8352E2B6BCF75C082FE790B
+:107CF000D86E703FAC908FBB133F35B1FD02A1EB46
+:107D000071BF9DB68E66B41B540FDE1541AF3E9514
+:107D1000089ECF75D3FF72B52D7711F6838F93B977
+:107D2000C19A16F4DDC4912D80C76B5FC7BB38A222
+:107D3000ECC884373C6B80DE6F6A3F8C781813A2E6
+:107D4000FAC8E53352857B2A9CE13C94B75AF9FC8A
+:107D50008EDB9B94D271FDD1AFE53833F257D36BF4
+:107D6000A3BEE7AC76B598B1D60032C1D80E11BA31
+:107D7000E950B3C01EBD21827FDF994FF142E9BABD
+:107D800017F40EFCF38B8119809B0DCDDFB1827E41
+:107D90007CE3F1A3997E1DB1BFFA27A2A7C3CAF65F
+:107DA000873B800FD5FB2FF2F12384720ECB95EA2F
+:107DB00047643C44C3BD11E79A5EAC810B33B2F01B
+:107DC0007C1C01F98842230AD64C363A81AF9A7F4F
+:107DD000BD26ECCF26E2B99E554ED6DE1A59F3CB1E
+:107DE0005D16E8EFAAF882FE975B17F55EA2F3979F
+:107DF00088F3305EA90BE767DE4B0A09247F0B7E10
+:107E00000569EBB93A7EA5C4C5E05707E8D1F8FF8C
+:107E100027FB936DECCF836A777FAE259EDFB6514B
+:107E2000BB907B4F7D3AC305399C16890BBE5ED94A
+:107E3000937EE751FD06D72D4A9F0D7A3CB199EA12
+:107E4000B1295A8F5D7209DE5BE7DA6B437B67D439
+:107E5000EB8BBC5F5E1BE37B8DE8991107F37153DD
+:107E6000D760C05DB64A928B29B1D94191ADAFB60A
+:107E700026EBC691E8F1DD8F7652F32F35BFD2F8AD
+:107E80005ED8AFE4E38616CF148214FFB4DFF7C7E1
+:107E900079E6015FD738D9FC130E9A82BFFC03AB99
+:107EA000E70EA0CF46FB1007EB1A2342992C5E1277
+:107EB000D2E95B4FFA6533E84F6348C271CC4FC7D4
+:107EC000B16142CFF4F48B4B64F452AB027ECAC072
+:107ED0005CC21AAB26B8AF7B6036BB4766600EBB90
+:107EE000F7F1DFE3D87ACC7D716CDCD0D21F584B30
+:107EF000EE817EC912F19B73BE39DD402AC40FEFBB
+:107F00008F73DF0DFCB014B9B11F194EE21228DED9
+:107F100032A44601F6372455AA028B1B1236EE40D6
+:107F20004AEBCB2856F361DCCAA0B616E22019CD85
+:107F3000B1CFF56C8893BF5DBCAB29EA3CCA8638EB
+:107F4000E66F1F54687F938BD9799470DC86920F0B
+:107F5000FCED88BF0D3BDBF1195B0FF527323E1BB3
+:107F6000E75F2030E897C4F33F5488644DC2F9912D
+:107F7000DF04DF992C383FB2115723D8CF97E2584E
+:107F80005C759DE05A0FF99F485D16B86F47C3FFB7
+:107F90008F27DFEA92E82B8EEBCE67C39C95EAC36E
+:107FA000F320AF8EC9E787AFC51E740D6678738B5B
+:107FB000BAFDEF9ADC82B24E6E56888744DAEB78CF
+:107FC00005E7F71D429C0BE6431DCB0546A760E184
+:107FD000E703247D9C86DB436D1C78272E13E9B7CD
+:107FE00011FF18BC1FCCE2B2003D1AFDE173A4865C
+:107FF000739EC673A06959E1B84D3AEE932D51E0D6
+:108000008E2F72BED986FE97D7C1F4DF8887FE60B7
+:108010003C2E736E92F2AB15E4DB5FAE49047BDB62
+:10802000FFCEE30E90AF910F9D827FCC4158DFFAD7
+:10803000831C739F8896A6A50D28057F342D3D0DC2
+:1080400053ED79BD5D8A19073CCDF5EE1BE3B59E76
+:10805000580CF3C3D3D09FB39E77DE73A3BA776176
+:108060007CBC3E8EF1BB5ED1F8A826809E75E75D94
+:1080700009EC7E924476FF9093C97383CF522A49CC
+:1080800091EFB9D11FE947DC33E68111D82093ADD8
+:10809000886B16BFD1CE655043C7E497C8E8FAB9DC
+:1080A0006F4C29EC9F916DCC2E5DDC301DDB4B2598
+:1080B0000F588753BE2E2D31B920AE7376D19F1C39
+:1080C00070147C51466B2EE0FD88E8916DE331D44D
+:1080D0008DF3B76573954088422AA59E1A2426978A
+:1080E00019B8EEB8D01473FFB3DDC6E6DFCD714E1C
+:1080F0004CD3D20697968D8DCC0F44396978A47AEB
+:10810000985E36AEFB9C30C5470AB46FD4A74E9933
+:108110000461DD40B387299CFF9A3DD6F42105F424
+:108120000CD6014BA87DD4E43984BF9A8AF14AFC6D
+:10813000139A5FFD02E6038EEB0AD0DE51FD5F8FDE
+:10814000FA3282D96F2BD8D3883865E7DEF707C1BA
+:10815000FADF87DFBF100FEB407F91BAE2C17E9E4E
+:10816000BCFFDD783837F4E1FD2C5E7197611E3578
+:10817000C1C6ECFAA3B6926CE8D702DF7FE77A2299
+:10818000704956B3758DE501D1709E5C7F2F4F55B8
+:1081900063B2E19E1E3FD65BC5EFE732CAA192CB28
+:1081A00061F9B64D4A860AED7BDCB67E706E8FA013
+:1081B000BD3CD9148FF3118D9E45DBC6283077FA6C
+:1081C0004BB399AF7FB7CA6C5C7017C37A9687F3CD
+:1081D000CD48E7C17D36AC6FC9CFD8FE9485B4AD2C
+:1081E000D5D4BE7A9AD9790B633F967CA816F6A7A8
+:1081F000C25BF29080F36278FF7E3A4E79563F88F8
+:10820000EB5EC67E1AEFCD319E5FD5E653CBB8FC50
+:10821000CB8807F52FEA5C6B335B9F36C6FFCE1F1A
+:10822000CAB261FF6D3CFE914B26C079E81D87867E
+:10823000245CEE3EE533FC1E26B8571AD2933E82EC
+:1082400069B64D65F76434BF7D2FE0AA3AB81DEFDB
+:1082500019FBBAF6A6AAF99403F6306B7687FA9161
+:10826000AB013FA44CD0F997D59B2E286CBECBF820
+:1082700070077F7E07F4371BF659AB3F9A4CE57CBD
+:1082800047A57C31F21E32BF4D7FEEA6AFFDD5FA79
+:10829000A9F55B2BAFE2FBD18CDF69F8CFE6782C38
+:1082A000DB52BA6E0065D19ABD2706F3F368784EAB
+:1082B00047C397113FCB484961BA108193E647B154
+:1082C0005F9A3CCBEA16F2FEFBD3F8BA5E1AC48F73
+:1082D0007AC38D111F1D72DB60D067233E3A7AB8D6
+:1082E0005FE42736E62794A9EE4288675137769DEA
+:1082F00033C24F3929D51DBC0FF46C0BC379C4F8B8
+:10830000CB9CB9D7651CCF57C6ABFDE13E3D94DB96
+:1083100044D81760F6C37B5A3BED3EB76BA8047C8C
+:108320002FC2F4B4AFC435746877F9D2272E38C0A1
+:108330008FEE1C41308ED311AFA7F7773611E9F9D4
+:108340001D9743A5D4FA8F3F838DDAD28AFB1DDABD
+:10835000BFE471A02FCD45B1FAF927FE1DE1F786E4
+:10836000DDC5F54C9B972CE072BBAB99AD672FDA5E
+:10837000588AF230EED77A43701666D0AA3C8D63E5
+:108380001490BF513E4B5CDFC17D605172228FF073
+:108390007D011EDCA753562F62DCC328BF7CBB9334
+:1083A0009DA3576B701EB7428ABD0E79A5DDF4B54B
+:1083B000FA63ECC7C22601EDA491FE655B6AD70D96
+:1083C00020D07FD6BFE87E8406A25DE2FDD4FA55B8
+:1083D000465C78FF40D4FA50DBF524723FF5F2E6B4
+:1083E000C5B82FBF9AF69FB03812C68534FA357AD1
+:1083F0008DFD2814CFC81688E3AE165C609FA3EFEE
+:108400002773EBEE3F5CD8B07F20C8AF5D62FB66A0
+:10841000DBFD02CE0B3B3F206C7D60BD80EB693DF8
+:10842000CAAF99ED07EA598E350ADCE757B651888D
+:1084300029C765F5F9AEA111766A7960866BA88EB9
+:10844000DE46DC1FB2A2A154F77C809DC793B8FD25
+:10845000EE4DDF484D62CC3893A65F9ABE69FA971D
+:108460006F57D93C470A1CCCC804BBFE18CE4BA89A
+:108470005DBEDACED707E6D157AA9FB8A05B1F58DA
+:1084800092C7E4B3442CC6E73DD957CA079D7D1E69
+:1084900067D7EF7FF8B6FDD1FAA1E985D63FA35E95
+:1084A00018F9AFC5D58C7230F21FE882F9C11B7B79
+:1084B0006D810704D07746A77FAF15E9EC482B7094
+:1084C000C139C83FC00794CEEAF4DB315F239694EC
+:1084D000DA715EC7E74DE3FA163FC8E17ED64EABD0
+:1084E0007B2C3B4754920CB89852DB36D3E2A4F86D
+:1084F0007C647421DC2B3AE5B1B69910FA5EF2C8BF
+:108500009842B85F7ECAD6B6772D2EEAD7D58E2D83
+:1085100084FBE55780DD80F60796DB10573DE58943
+:10852000E7F27995BD3FCE5C329FDDCBCCCA2B29DB
+:108530008F2D743CAB3C3CFCF7A09F95ADC545101E
+:10854000B7A98488371DCFAADC8E902D9B8DE79329
+:10855000E87BDB6C9E5576F0EB2EADC5F1ADF2B04D
+:1085600084FA440EB1B8A844FB6AA5DFAD8DA37EA2
+:108570002FE5EFDA248B0BE6AFF4B91FE6B56B936A
+:10858000DCAA1AF15C931F7C0774AC35B175FBFD56
+:10859000AF0D4F68BBCC78BFDF4726C33CA4C5678F
+:1085A000C1D4589EAF38F17C44BE89C5358CE5BF37
+:1085B000D2EC2C51330017D5871416AFA67FE04FAD
+:1085C0005611A617D5849DEBAA3A4CF01C4BF5A189
+:1085D000423CC702FBFC3FD6E1F05F738EA51B5700
+:1085E0008C4F059230598AC0F534BB559717FB9BC9
+:1085F00046407F8818E78273186286A96607EDBF38
+:1086000078054D293F24A74B84FB5AEAA64E11E179
+:10861000BEA93532DF3F6262E7CCB5F69A387FB447
+:10862000F4B4BD6407C8FDEC5BADB936B67E81F32A
+:1086300061ADBF6B04371160DE7580E0F9809C147A
+:10864000D202FCB311771EE0ED3D7B12E7375B37BA
+:10865000A67F1990BACCA697558AF7571F5984FA66
+:10866000E04A30DD9349F36FD997B17C86E9422621
+:1086700085F0DBF67296BFC6746108CDBF6B5FCE26
+:10868000F2B0C04907B623F68A42FF486887E37D07
+:108690009BFB1AC0B76462F117E91505D753B47D87
+:1086A000216BE9440BF0F81ED84D88A7D416FCDAEC
+:1086B00006F1EA02B70AFB3D36F37B83BE69AAF1F5
+:1086C00055B49970FE0329F0FF43CE4F4D2EA4C937
+:1086D0007D0DEC8B258DEE6B601DEDB4DDD306F6C4
+:1086E00066EC1BAD53C07E37BDF3A75CBC9FFC0A94
+:1086F00056CFD837E89C90F6E7EC6F066D8A5C8F12
+:108700003E6DCFFF14BEA36240FF54509DE40EAAFD
+:10871000876BDC4455B260BEAC9F2F3611669FB6A6
+:10872000D94ACE825CC9C0108E5B45F6924EC86BAA
+:10873000F69CB426F5695F9B92BD5A847139292352
+:10874000787411D8FFDFB17B3D04B71BF773BE14FB
+:10875000BED78CED0FB1C1FE10D07F1749F3A7F241
+:10876000F8178B2F9394DC887930EF07FD7E1AEC95
+:10877000379F6063FB0768BF44B0AB63888AE958E2
+:1087800088676581283D98DF431A8FDE47EB7FDCE1
+:10879000CAE2499606A28B0F66C7B338CB4C078B4B
+:1087A0000FC6C98DB782FF10778E38C17FE8FCA550
+:1087B00022E1FE22C97923AE8F1D3411A0F7593969
+:1087C000E084F599AEAB247533E9AEAF93CB5BABE8
+:1087D000F77145BD0AE272731DCC3F7D369FE07E86
+:1087E000E8AE534A00D64D93322C3591F19F2BF9C8
+:1087F000770F390B32E321FEBC378E40FB13F6C5F1
+:1088000099400EBFDE9663053CBC043CA27C483216
+:108810003BEF86FA922E507A33F139DB272FA9638A
+:1088200012287F27DD6057E1BEA967AD8D37E07E56
+:10883000D0174C78BFEE4B8AAB14F22F9D579D603A
+:108840007F9FCD6C8CC3FEBC60C2FEBC14D775F597
+:108850004A4AF7C323587C4AB21109ECB2642A5041
+:10886000EFA6CF73E3D93C49B3D3CBE399FE3C2EBB
+:10887000103C0F2099F2517FB4FD3A9D5D04F7EB57
+:10888000F49BD52A028EE34AB5B851488478CFE4E8
+:1088900012827EDB64BB8CE772607F309C1B9BC2C4
+:1088A000EDEF940F2A713D814AE030DC7FD962E719
+:1088B000F768F175C5EB394EAE236D22F891D75D9F
+:1088C000222E88075D7F498AE9474EE7F53E23104F
+:1088D0002981BE977F51950077F944EFE74DAF2F7F
+:1088E0003C05E3E0548BE139F889488F1BCFF74F03
+:1088F000771AEE4F8EE7F3D6C16470E43E316D1DFA
+:1089000068BA38F209F4538B1417F065BBDDFD3EED
+:10891000AC7BFA5B6572B938E2333EB69F6FC4A593
+:10892000385CFFA1F8B4032EAEAEAFF35B69BFAF06
+:108930001ECAEA071C825DB9F29729C960E7CDF12A
+:10894000CCDE68A9863BC0973381E1CB39BA5B3F67
+:1089500057C567E27B9ABE01EEA09E3D72607EAC79
+:1089600075658AD75580D7ED7682F3B31FA55BE690
+:10897000829E69EDEC8967F837A6EB6A57EE87753A
+:108980001DFF676CBC9836E0921239DE7FE86438D0
+:10899000F3AA75336FA6FDF3DA655CBF49E5E78B93
+:1089A00022F1921E81170D771D7616EFD1F03375E7
+:1089B000F7BB223C9FFA1921CE4C129E8768F8998A
+:1089C000E267389C72888D13BDE1C7DDE59C06E641
+:1089D000310A3787186E0A283EF0F7B77AC08F1130
+:1089E000374FF58A9B2FF13CFCAABD532FBB6E1865
+:1089F000F4E9F77D1AD389B6D8FB828F727EEF56E1
+:108A0000EA6ECC067B7193899D7F9348C6AD14E7CF
+:108A1000BBE3B47BE56BB220BF5D62F6677BB31945
+:108A2000EDCF76BBC78371D7340B9ECB2692A70DB3
+:108A3000F6F5BB0658D4C8DFD1F82EC761A31C9A3F
+:108A40007802FCEFD798FCF36ECA811BEC487A19C8
+:108A500093C3B893CA2611E2428EFCFD80AF4FE06B
+:108A60004E2DC0C37105EF25AA3EAEA05DFCCDBE64
+:108A7000B70B21BEA9ED1F9EB0E7EDC28291F03E7B
+:108A8000C3D96BDCAE6A793C4A0176D2702FFDC443
+:108A9000F07926FDBDF225809FECEE72E37DEB734D
+:108AA000E084171D776E6D734D07B360BC6F7D4E0C
+:108AB000889D1F9B7DD43D1D4C65D47DEB1C0FB75D
+:108AC00091D65D7162F4FDDF747C3E160FF1FBD729
+:108AD000430AC4C11B959A6BD87CA2260BEC8FA6C7
+:108AE00077F847F9D6F8E108DD7DFFC3F8F8F38899
+:108AF0004B62F738B529B84EF82861DF35F271EBD3
+:108B00002BAEF739AB5E9C0FF6706CB91BD76D5767
+:108B100039457CFE1312B26481BC5C12AE7734CA54
+:108B2000EAD41342F77B442A1961A7E57BFAC58D85
+:108B300085F6EF70784C0EF02BA4AE43F0DD84493F
+:108B40003963C16EDBC7AC4D86714CA39BD255B463
+:108B5000D5DE4D87465727C7C91D8E8526C778F6AF
+:108B60001DD8A1E0B1760B7CAFE1A071EF3926FFF3
+:108B7000083C80FCBBF1202C80BCC6071B4FB5FC19
+:108B80003F1F0FA181209F1EF1007108C7B7C2438C
+:108B900016F055C303F5D7AE02FE68FE5AA3C2F61F
+:108BA0001D6A790D0745F67C7CCFA510DC3F44F6A5
+:108BB00059D9396D4F22AE57BCEC646D747ED83EE6
+:108BC00098BA9864B283F9EBDAEF898C0909E8570F
+:108BD0008EA106E10EF4E306A23D74717E9176410A
+:108BE000807B37716F7906F897A164D08B31E6E20C
+:108BF00010E07F876D4A06F88739B6C95980AF5DA6
+:108C00002356BD0E43D6AE01E52F6F51BBFD27CDD8
+:108C1000EEB5F06AB5F66F7430FB74BD9B9D0F0224
+:108C2000BB1D498766FF412C4087109A63FACA86AC
+:108C3000F6BAB90DEC39D041F9BA5F204DE01FE426
+:108C40009BDC2953C1CFEB179280CECEBD5F0C8643
+:108C5000386571F3AB4781DE626D3DD4A55F0F359A
+:108C6000FAD19ABFA3CD2B347F489BCF82DF04E596
+:108C7000D9FCB9D3CCD6AD26872C786EF9F1F3EABE
+:108C8000556EAEBF12ED4731EFC72DA415E9D2EEF8
+:108C90001DB999F3A3F8109D876643392137513EDA
+:108CA000DCC4EF1DB9C9A5BF57E196BCD8F78E68E3
+:108CB000F5F4F6BE717CB8D6B06EF46DD3433E7653
+:108CC000CFC87FFAD83C77D210D12FC1809A97CEE7
+:108CD000EE6970323E1C52628F57FBB9FE4E32B5C0
+:108CE00065C3B9E5FD7BFE8EE3E32B7BFEFE1EF83C
+:108CF00089134F4904F6B54E3A352E01D7E7F3D222
+:108D0000703D59ABD7FB69938DB0E7881FED77575E
+:108D10000E527ADC0AD067C1F4B7671EFF29D477F8
+:108D2000F1B84422CF4D142A9EA110C72DE4BFBF35
+:108D3000735060FE92567E90FFEEC5F31CB7B021D3
+:108D400042BB8FC41C21E79BF83D199A5C6F3A59CE
+:108D5000744ACA8E960FFCFD33E20B5A5CA199F35C
+:108D60008FB4FC11CFB77CA7E96E09FCF3EFA4899F
+:108D7000C41DD1EE0C95CEE023E21C2F3B0C7E4AA5
+:108D8000CB733FBD998E2BDE3744DC4AE86DDEFEA7
+:108D90007A36E45BC598F78F18F9FB9DE6BBF1FEC8
+:108DA0009121092AD2D35BFB93AEA638190D722705
+:108DB000CCCFCB65F77718E5FBCA9EFF486E1BD971
+:108DC00033BF7B92BF510EBF3D5380EB4EBDC9C335
+:108DD00088DB7DB49F7EDABF10EDA79FFA63AFF802
+:108DE0009C98FFBD2F0DF31A5EBD7B9F4E067F4EF4
+:108DF000C3E9F464869B89BB7F9A4CECDDF232F2C6
+:108E0000ED7307F36BE610D7EC9BE93F770AAE787A
+:108E1000B4177ED20AFBB34A388D730E17A2FF41F6
+:108E2000F87910E33836471C89E7DE7BFDDD9BA12E
+:108E3000F932985BE37805BFC702B8368E53456FA9
+:108E4000D449E0B2154AAB981DE37EBA469751CE9D
+:108E5000474809F6A3273A8D3830D2ABF9E7DAEF65
+:108E6000C0507E4C4FA2F5DDAAE663FFA2C661CEDC
+:108E7000979EC6DF9EFA959CC0E3DE1CFF174E4E00
+:108E80007B0BD8DB93BE19E5662CD7EC47213490D9
+:108E900083A91FFC912109A9A80F859714E2A6E3D5
+:108EA0000C19A83FFF4E8AAF40BCDDE364CF7AC205
+:108EB0005BF52513F12477E34E0E3E6603DCED9659
+:108EC000EA6C101FBDCE5EBA06546FDAA705B3F088
+:108ED0009E8736138190D9F4E6732D1047F01E2536
+:108EE000783EA0A079FF54C0E9EFA5569C47755E77
+:108EF00024E4B1083F33D8BCC6067E5830859D6F48
+:108F00003B984874FB90F72730BC068F9FBFD91D54
+:108F1000A3FC122F9F49DC29D9382EC763FCA3700C
+:108F2000BD09FB3F4D701D4801BF659E80F385CE96
+:108F3000BD130EA4507A3BEE4C443B333DF8E0DDCC
+:108F40004E2A88C6FF1E8BCFBB160A78CF40A1EAF7
+:108F5000C27C615926EEDF98F08FE499C5503E43FC
+:108F6000C6F9CD74B1528278D4D9342107E68B7B0F
+:108F700084B65AF81D5C7F296B8738FDC930FF7CA9
+:108F8000A738790CFE769CAAE587E1EF0312C33C73
+:108F90006DD5CE0BFBCDB47CD56C01F7EF4E77666B
+:108FA000107F047E0AD753798EA5B86CEE5F00B8A7
+:108FB0009E59A43F3738BBC4460291EB168213EF8B
+:108FC000213BC8F7697709FC5E7CAEE73770BCCF00
+:108FD000999BACFBAE94303FD3BB5364F771E4B3C1
+:108FE000DFA1D6F4EB46AE8737F0F9F13C4F868E21
+:108FF0008E6288D288403F5B47BEE5621B0ECFA5DC
+:10900000E20787E7D3F66E1C6198D78A956B111734
+:10901000696C1D6F36EC8213C16EEADFBB254F9F72
+:109020008FA1C797B5139A3D98BD57C475C3D9F999
+:1090300094CF0289F2D3BFAEBD9860721D8078D004
+:10904000AD97DC788F4E94BDF8A0E81BD98BDF502C
+:109050001DCCA37AFD64021F370791416037A68BB0
+:10906000DB7E0A38EAA4E3A639068EB471479BEF8B
+:1090700017523D06DC90336C9D65FAA534DCEFA4F5
+:10908000CDF7C37684FA25AE18FED26F12B274F70C
+:109090007A84ED4A845F22E77E7BBF643AF5479588
+:1090A0001CA06F20F18F457B8671C942D81805F14D
+:1090B000C1B47318E7F14A74FE8AE3F3D3882FB082
+:1090C0007F4252B77E18FD152DCE3CD6A9F9537AB2
+:1090D0009C84E38DB3D87DA51A4E0A819FA0FFB36F
+:1090E000448CEBF4861BADFDDEF012A2F6084C5664
+:1090F0008F78E1FAF775F1F2176D7C194A86F6055B
+:10910000271A3E34BC18C79BFF34C4837A1A6FBA3F
+:109110007A196F0E8C90D1AEF7E6D77CEAE4F3EAC9
+:109120000427A6375C351B7F97682CD811F037F9D8
+:10913000B8158E6BD5339C1C685B24C1FA9117EC73
+:109140004766B71CB478F0FF00C6C481D500800024
+:10915000000000001F8B08000000000000FFBD7C25
+:109160000B7C54D5B9EFB767EF7924334966924940
+:10917000323C841D082121090E21BC1137490811F8
+:10918000A20CA8888FD6011F6020094DADD5536F62
+:10919000332181526C3D58BDD67BF4F43758ED41F4
+:1091A0000D75080183277026A098F0D020F8C07AAA
+:1091B000DA6829451B92185A0F6ACFF57CDFB7F69B
+:1091C0004E662683A5F7DE73879F2ED65E6BAFF5BE
+:1091D000ADEFF95FDF5A9B4AC09F0A50B315209844
+:1091E0000650F9E1864A4806E83B20011403D4966C
+:1091F000C9411BFEB5B4FDB1C745DD0C5689DF5131
+:109200006126C0F5207E0B950EC5E60658E695BC96
+:10921000721680D62EDEBFE19225A862FD7AAFF9E4
+:10922000E31E9BE8FB35FF5F03C800B8517F7F1941
+:10923000FD0FFB2FD3A460185F5D363BBAFF8D97FF
+:10924000CA3F91A6022CD7629EC34F3E93A7F2223B
+:10925000CCBE24AC5744B78F7326B9CFD9F12FE3D6
+:1092600061FCD732C0C5F3656F51F7AFE977EDC840
+:10927000F2483D526601E8ACB77119DB5E6E017FC2
+:10928000C881254D50C4650052010A9DB8981958EF
+:10929000BF64010DF9086313E0F7B93A1D1386DFC7
+:1092A0003F88E30770DC308E1FC8013854EFE4FAC2
+:1092B0006BF51EAE5F93822FA4E37F87BFB0A8B883
+:1092C0009EC5EDDF51FC38DFE24B0A8F3B9BD69306
+:1092D0004F0B8371B49E3FF716FDE30D30DCBFB634
+:1092E000FD338BBFF0F2EBF95BF3E7A7A83C3FCD72
+:1092F000AB150CCFBB44011883EB5C9A1BCD5F63AD
+:109300009E58F9C6CA6FB9FE7EACFC56C4ACC79075
+:109310000FF4A2328D8AC3FF4B26D0A65F5E7E4338
+:10932000F2B1F8B3BD0523DB017EC9721A1E4F9757
+:1093300017742BBE42419719F5BA52B70BD4EF40C0
+:109340000ACAB9B213C28948D8F5E72B3E51A8F42E
+:109350004AF071943E037C6CC85B1E1E7FD125E4ED
+:109360006BDAF0BC8B146477113D1F0B8138EBA8CE
+:10937000A17114EA1F60396CD9615A15C2755C631A
+:10938000813B7D54268A32E094B87D93D3C4E3F6C2
+:10939000FFC56682AB015E3E985902489FD7EA3C02
+:1093A0000613014266E0F7BF4E52B9DFE6240824F7
+:1093B000E0FCA074DBC85E9412805CB43B65B4250D
+:1093C000D88843362B611FD961BF578106B4DB2F84
+:1093D0008DF70E056E0714C9E68F734C8D59F47E18
+:1093E000B87B1EF69B55A4A8DBB08BCBAA7E87DA90
+:1093F000FB0E589DF45EFFFEEF7798699CBF8017C7
+:109400002984D70E5881DAE73BCC41F21F8BE4E385
+:10941000B209EBFD030056EC3F7F55B814506ED7F0
+:109420004077A313CBB924C738F27B8DD69BCEFEF1
+:10943000C3310AE5B44097D302DD6F951E90D98FF2
+:109440009426C941C81AF653D7EA325A806C253A95
+:1094500016B4E17AB1FDDA4B4A5CBFB4481F77E13C
+:109460009F4121935C08D17ABBA84DF8A312D01478
+:10947000C0294B6D31EDE497909E45CEE8E773C966
+:1094800077A25EEF8EF14BF833D1BCF73BC5BC8BB6
+:10949000E4BF26F7E0FA5FB668EFCD437A074E9A4D
+:1094A000E1597C0EE7B13267245FDAD0AE83399799
+:1094B000B78BFD07133515E97999F4C741F5D19AB2
+:1094C0003AF5F2FDA7F60C94607778B97985021326
+:1094D000581D4F7B3286F93D82AF3AFF63F9D9229E
+:1094E00041931DF9BCB0DD5B46AE65041F3B918F17
+:1094F000F85EC980C6F35C291F0DFB78F95CA246B3
+:10950000FAFEF2B9D11ACDFF2AE96BFAB0FEEF3FAD
+:109510003B9848FE13F9A82AA817032E9BF759D6A3
+:109520005FA1F7A15139C16D586FD1F5FCE5C48138
+:10953000A3F9C4EFEB4DDE67691A65E3C41585E452
+:1095400037B7969CC577240DA407D17E24D509771B
+:10955000601940FB217D0BA402EB93194240F336C6
+:109560006AF034950BE6AB29C4EF411CB3DB41E351
+:10957000A929A4E7F0D78B337D8523F9DE528F0A22
+:1095800085F3B4D6DB34251B605FBD93EB6DF51E10
+:109590002E5FAD57B9DC742CF9C1208E53AB593412
+:1095A000256DF87D57AAB08F05E86788AE052005C0
+:1095B00003A8730B1ED6F55E91829B249213AE27EF
+:1095C000829F2897C19EDC08FE36294D9366B235EE
+:1095D000B0BC8BF24DFC3E06FFE0F35923FBA3DC4D
+:1095E000A3EAAA4B627EE6BAB42417963F74F852F7
+:1095F000A86C916E397C01B8EE12F55BE50B38FE74
+:10960000F4F0427810E3C374140CF1157FB713FD26
+:10961000333A2C40F2C180CA7659A4D3A37D2E4997
+:10962000E7703E329DAFC7E07BD6CA30E9D13EE855
+:109630004923BE17DB7C76B428A443C855936EF645
+:109640004838DE9C748B5726D226FAA66F44FE75E6
+:10965000A4E384D8BFA32363AC8AF6A6296FBC4FCA
+:1096600076ADD91C61812BCCBD3D11713C139E712F
+:1096700052BC229FF635F2BDF377C901F66B8873B1
+:10968000C88F759E4AF686719E6B2ED9BC56D27FC6
+:109690007A11EDF56062F254F2CFD05DC6EBB8D628
+:1096A00026D6916FF617BBD89F850F9FC0F7FE6D2A
+:1096B0001080FCE935DD1FCA80F4949AF2327B9069
+:1096C000CEC3D2E4142A9FFC5D720197A7927B89D6
+:1096D0003F074D7695E67DA75E2DCE467DD1DE72A5
+:1096E00098001DD682B71C0A9527EAA1381BF5E51C
+:1096F000AD7A1B9727EB9D5C9EAAF7707918DB4922
+:109700009F5EC776D2B737B09DEA5DD84EE5311C73
+:1097100097CAA2DB9378BC96DB922CB48E83C9D017
+:109720006CCC4FFA144E0CB78217E03F1EFB6AABAD
+:10973000ED2A8C97567FA1340DF9F4B3AF2A14ACFF
+:109740001F5B3CEEA1BF60BBF967A61FDB90DE9BF1
+:109750004E395A8F63DD9EAAFCD841FA792C119DAF
+:109760002399B5B94B433AA6936F1CCD6CD760369D
+:10977000D6D3F47AC07C5DD97C8095A53DF9E042D2
+:10978000257159AFB3217F57DAFDDFA3BA25B0ABFE
+:10979000A2EC2AAA6388247B97CC41B6F7B1927BCE
+:1097A00005C6BB950EFF7F12BF0D7BD1A43FA491D0
+:1097B0007F98A949E072B3BC8393A4E1E746BF95C3
+:1097C0008E45FF49FABADE25B37DCD982F6941C792
+:1097D00048FB35FACD38AB9691FC669E2F6FA2728E
+:1097E00059858BEBBE55B39AC8FECB1C977BBF94B3
+:1097F000DF7FD06566BD2D51B05F9C3868F49B8ECD
+:109800004A46B87BA02B31F82CE9F5697F6312D664
+:109810001779B28A64DD3703D75D3BB6517BE5EB40
+:10982000AD6C57DE242FE1F299A89069D8BED02103
+:1098300079C3642AF33F6A4AA376A7E425B62DD4F8
+:10984000A69D28A6F66CD9BB90EAA7D5320A51A7E7
+:109850009485F32E60BFC5B9295E1BBE772AFCD064
+:1098600045D2DF85B949DE04F2F34AF0E91AAA7B52
+:10987000ADDE0695D6F15869328DA34A5E13D65BEC
+:109880006E28FD1F4447892F052489DA5D0AE1D738
+:10989000277FF7C33227F66B192701D9CFA970DECE
+:1098A0009F88FE859D896A02F9698BB38CDE6BB156
+:1098B00048CE4D5CF79552FF408E597D1EC73D7EC8
+:1098C0009B9DE341E55B058C838EDF3686E342E5B5
+:1098D0005BF34BA83C6E1278BDF2ADCA0A6E3741FD
+:1098E000989C4AE5EDDFE2F7B697FEB0CC8DE31F1A
+:1098F0001BEF62DF82722A5622FC24F60789DEBF44
+:10990000BD9AFB7748990F9DC5FE170B528AAC385C
+:109910007FB93B21AA7FC55857547D49F6A86225D7
+:10992000C24F56166445D56F28968AB323FAFBE6D4
+:109930002744D55794B98AB323FADF54392AAABEEB
+:10994000F2A6ACA8FA42D31CE13FEA617E99B0F3DB
+:10995000F965D9208C89FCA953F47D03DBEF263B04
+:10996000EF12F8A9C885F809E552D655CC71B9D8D7
+:10997000AEFBAF00747B6692FF17BF2E1C8FDE8399
+:1099800020FE99497848FC1676231E207CA460DCD2
+:109990008EA0A7CC111DC72B40CD27FF5BD1B9846A
+:1099A000F154B96779199A31F231FABD0AF9618136
+:1099B0004362E82EEA32C7A5B7626CF4FB06AEAB91
+:1099C000D0E96B31F99B52098B05B46EC235C67A6A
+:1099D0000C3A2EB79E0AF98E3214FFDF5C572CFD2D
+:1099E000001B797F114BD7A04BC78188A71807763A
+:1099F000A6323EC49F3B1E3E30704F25FA3757A417
+:109A00007F7348EEE58597F76FC6B897C37BC6B8F6
+:109A1000C6FBD02CF3FCC6FB43CF5529FEF39DD8E3
+:109A20003F29CE73B714FFF973D1FD17286AA3033A
+:109A3000EDF82848DE00F1FBB8AA10242B3DAD3527
+:109A400051B9E843BF427874F1D9401395F37A8352
+:109A5000C7ADB8FEEB726595F20D061E8A5DD78C18
+:109A600054B14F3A7A49B5ABD8DE1250EDB4BF6865
+:109A70007958B5D33EAA45830ADA2F6A134D1B697C
+:109A8000BFA1E56389F59C54E1E7F352058E31CA25
+:109A900067657F5E2A96D5B69E47098BD47C316078
+:109AA00021307094705EC1489C7754093A68BEA317
+:109AB0000F071DBE083F7EA5386F14295B3AE9A742
+:109AC000A445FA91525B8216E93716395D51F5AF1C
+:109AD0009CAAD8C77B4645BD779D9A15D50FF16BDB
+:109AE0002EE1A0460BE42AE4474D895EC277B17CA3
+:109AF000FC177DFD5E8793E01398DDAAEC8F13972A
+:109B0000BCA5827FB1CF57A48A7DEA6F683D586EAD
+:109B10004F15F435C93E01E21037933EC4D6714F5C
+:109B2000BA8AC6C3913DA4775EBBE922426FF84E64
+:109B3000EAD5D729A8CFDEE9A6EF4EC4FA23A98B30
+:109B4000447D9E69CF04ACFF34B55CD4AF364D374D
+:109B50007B017E058BAF2BC37ABADBE74FC579FB60
+:109B6000CD8EAD12E219C52441917B78FFFB8805AB
+:109B7000E3290A16954C7321AD76ABD82FD724A0D4
+:109B8000FFA3FE259A4AFCAA4930E4DC9341711DEB
+:109B9000EECE3491BF30F66F760BBE87EFE7D8FC80
+:109BA000B5425FC2C92AFAA5FBF72FCA24BDD89EC9
+:109BB000EAE4F5E7EF99E7217F85747D97FAFD7F69
+:109BC000A46B533CBA9ACC629EDE96FC528ABBF9D7
+:109BD000E3511CD2B0BC70BBCFCF1342A82B8CCBAF
+:109BE000358F84F54697C54B387DFB907CAFAC6CC8
+:109BF000D4F313B25DE88D9C62DAB81BCB9FEBFA0D
+:109C0000F214CD3B83E61918B71CF5019C03E3560B
+:109C1000148A3AE9832C170D10DE1EF8569297F736
+:109C2000C763077EFB03ACBF7747BE9770F4078915
+:109C3000823FAB82131A7BB03ECD1ABC2A8C743E95
+:109C400094E67F96F4E0366B7012EB9B6363128DA3
+:109C50002F69C0FB10637F87FB38D5327124EE1F5C
+:109C6000392FD888CFB7CC117C36E6459EDA28EE5E
+:109C7000BC375B3C37E8C0F95B88FF063D4374C0E6
+:109C80005827C7031079A445B243E461FF60E2BCE2
+:109C9000492D191FD6F79C35F1BEAECFD85780E6B7
+:109CA000583D939B789E392736C94C6C00FFCCD425
+:109CB0005948AFB6ADE77DFA8CEEE87DFAAC4E7F41
+:109CC000A903DF9BF57EFC7CC83C7DDCD910942980
+:109CD0005ECFE989EE374FDFA7CF3B1FFDFCCD54A8
+:109CE0003DBE8D86D191798E3A7DFF33787C420AD4
+:109CF000E929F93A19F96E5165989D3AEC375AEB12
+:109D0000B15F0EF9471B9785A79D7711FD6DF5A8EB
+:109D1000D016F2931E2E0D7B2A3C0D77C2D4887983
+:109D200074BD37F838F8BEE0E3B49EDC9FCFC7BA05
+:109D3000B9D30C4175789D73753E0D82E0F3A0D3C5
+:109D4000C27C9ED9F5CBE9617C64F598408D585F63
+:109D5000829A086A843FB5E7A646D565433E3ACE67
+:109D600098AE8F9FE41D1D358E81370CF9BD9A5A30
+:109D7000DE493864BA631DE38E94D913A2C62D3E22
+:109D80001E2B27641CE17624F29F08D79F56A270F1
+:109D9000C62C77803800B33F546270C97699EC685E
+:109DA000EED9E8E7E6B4CBC8ED72FC84A93F9FEF9B
+:109DB000FEFBF9E9D2A2F9995611CDCF745F343F79
+:109DC000335745F36D943F9A2F63D64D896ABF6A26
+:109DD0006351547DFC8373A3FA6761008CAC4FDC44
+:109DE000BA24AAFFA4ED2BA2EA939FBA2DAA7F5E04
+:109DF000704D547BFECEAA2B927F61A82EAA1FB174
+:109E0000D7F40DF2BFBAED1FA2E6F9EF96FFA23428
+:109E10003D2FAFCB7F998E435C1AFAC7A2E138453C
+:109E2000E915F293AEF637BEA0FC4BA044E5BC5357
+:109E30006009781BB1ED09D927915F1B83AC36A16E
+:109E4000DF6832C13AF2F78F9A4C9C8734ECBC2A17
+:109E50004DE08BAA34E1F79F469BA6F866F0CFEC65
+:109E6000DE9E4478433699A09BE29AE265BF71C6B4
+:109E700001E16B713E7934705EAB3479F6B299A82A
+:109E800087F29B32EF1FE5D17E50717D8DC71F3F5A
+:109E900041F99F8B0E9B4AFA2AA7FA0314B7707DEB
+:109EA000A1E761245E79AF3E3C89F649467D95671E
+:109EB000E366EABFEA8E859368FF3AF4FC8E8E492A
+:109EC000651172885CDF8A38F8E87B69223F67C4D5
+:109ED00087DBAC6A630FCA6B9A2CFC3FC685EFA583
+:109EE000E1FA3F901E360B9C1530D3BA314E72DE2C
+:109EF000DF8580BA0ECB94E178A47E8D4AF5C184CB
+:109F000068DCF9261144FB085B2AC7FF5B0D7FBBA9
+:109F10002E8FF936E888EE3F78F744C1CF6F23D70C
+:109F200090DF672C621D06DDE7753FFCA9EE877B9D
+:109F3000C9FF46E49BD7ED783C89F0F5995C81A791
+:109F40008DE7CFE8727D264DE0E9F53B139C9179D2
+:109F5000C7EA902BAA5EDB36CA7936420FD71BEBD5
+:109F6000F04B0AAD63836E3FD59D3DC9B701E3F168
+:109F7000A7D370DC9A1D17BFBD8FDE370D648838FC
+:109F80001AE0F96E790F18D7DFF21544E1D297D2B3
+:109F9000447EE525A20BCB95583851DF56626C778D
+:109FA00051F9C6FC72B23B7C1E96B0BEAC13CC8499
+:109FB000D396FBB3CCC4F453E07D672F2E6D5F9A2C
+:109FC000CAF3DC043E33C5C577BF5D9D44FD86C63C
+:109FD00033C61943B959D42B57C09C41F99A6B2405
+:109FE000C60D389F8D9EFBEE18B399E2AF31DFBBF3
+:109FF000E0BFF00EEAC50AF0F2B8C6F800A9517E3B
+:10A00000F803CB901CED24BFBA2E5398F239756734
+:10A01000AC7CFED1DF30F0EB0790CEDF557DB15741
+:10A0200042BA7FBB7AE057FBF0F9AD4FA1DFC5B56F
+:10A0300066DBFD87D322CEC3CEDC7D91ED0CF1C86B
+:10A04000F34F92337AC9EA25FBF8A0EAA59C48BCF5
+:10A050007F226D6127BD07B3D3E29E47C4EE2BABD1
+:10A06000483FD96E55C699865EDEA7EB65DD0B933A
+:10A07000F9795DD2D07A44FD7999F3577507ACBC74
+:10A08000BF7F47D787AA17BF9819999F6B41BD54C7
+:10A0900073A8747249E79C2AF266CFF1C1A9D46F04
+:10A0A000A3ECEF213D3978E9E364AAEF79F34B5E45
+:10A0B0000FDC7465F4F723F322F95C9B34F02EF97E
+:10A0C00093EA7D5695F250A5FBF28EDD8EF59A4E01
+:10A0D000F43BB89E0BAE9E234FD37E6ABF04949789
+:10A0E000AA0927B073AF69958294C7AA6ADBBD65D8
+:10A0F0000CD6AB9A971793BAD6260B3F56D32205A8
+:10A10000693CF0A7317F8A74DB287D35EF1F0BB0E7
+:10A11000BDEFA818FF5C7D78EA59F44F7D2D9F9D17
+:10A12000233A36B459393F762E296C1983F35ED819
+:10A130002D8502EAB0DDF6B9C43E6A5DE8310BCD8B
+:10A14000BBEEB9E5D9040FFBF69DB4907F5CD7FA5E
+:10A1500058B9FEBC5884FB20DBC5FA9D1D9322F341
+:10A1600049F721FC83C8F881F40508F78290E309D8
+:10A170005D3EABDA273612BBD0AFED7D5A62BFE64B
+:10A180007493DF3BB8EBDFFF95E6DDFF2F9398FF7D
+:10A19000C557C67FF005184FD4E8F3C0F95316DA57
+:10A1A0001FD6B49ACFC53B17FABEDB77957BC6F0B6
+:10A1B000FE3616576FB18038B79900C1E7291E38AF
+:10A1C000062CAB919E1F5107A447710E58D660DD37
+:10A1D00046764671C2E308C6DB17D7B9159E0FF75E
+:10A1E000081BE39D57D6EAEDA56A8F85F270359E70
+:10A1F0005E0BE9754DF813715EDFF651B91667BF56
+:10A200005CED167ED3D003C3DEEBD2A7B05D98879A
+:10A21000E260C8C6765FB86680E253DD7ED40EDAAF
+:10A2200017B8FC034477606F824AEB2BDDF7C9CC8B
+:10A230009E8879FEA4DB8751AF79F9A3A966E2E78E
+:10A240009E8FA62A49C3CFFB321CEBE2E555AADD5F
+:10A25000224E6F4EF69D8FB683046F18E7AD69B737
+:10A26000F3F907DAC1968EE2483BB875DD0ED2F3FA
+:10A2700076D98B1601356DCBFD0DDC3FC94BE291D4
+:10A28000DB1606480F65A78FF513FE8AF3CDD4CFF2
+:10A290007D2652AEDB7F1BE991E2084F8ACC6BD45E
+:10A2A000987A7ED121915CB76B269AAF08D86FC996
+:10A2B0000E5F0FEF9F8A3354DAC71E9E510EC4A75C
+:10A2C0009F1E90385F6B4EF56FCD22F91E95B9BF7A
+:10A2D000E5F00B013A97EE9B06C5449FB1DE9F4E19
+:10A2E0000B838CE36C2E042F4DBB79FF2D1ED2DF28
+:10A2F0009FA61F617C61F78680FC4A23E206CAE7BD
+:10A30000D80B42611A2721D7572CE33C796E27F3EB
+:10A31000CB62F57B291F944D755C874DF1AD23FA17
+:10A320006CEE44B19F1E7B6579BA3EB27F85CE1B31
+:10A33000FD9C2FE9330B3DEDBB0A185FF31D9D39E2
+:10A34000D4A409BEC1762E6BDB3AA646C6DB44F028
+:10A35000DBE879DFFE5BBC44BF3951D7F78C44B6EC
+:10A360008BD8F9FF99F499E46E5AB3358BF84C7C8D
+:10A370005347F67B5AEF67F003147F2ED92B92AA2E
+:10A38000C5CB0F8D77973C4E72DD9CEACB7515F0EF
+:10A39000F1AC00C39EC4B87687FDFF5764FF1FE988
+:10A3A000FCDCA2F86DC4DF4D7ADD6CF1A94EB67FFE
+:10A3B0009F4AF30FAD6F74FCF5B5E9F6BA6582FFFD
+:10A3C0001BD7B74F5F9F3915F58DC64B06EE674E0D
+:10A3D0000E0648FF9A92A078133E3EEC2AF790DDD5
+:10A3E0006D39F4C538B2F7A624AF0728AF7560D62B
+:10A3F0002AB2FB2DA36F63FDFFF485BC2239629E58
+:10A40000136925ADE4BF7E69ACCBE2CFA575FC42F4
+:10A41000D723635DE96EDFABEE88BC118C755F916D
+:10A42000FE80BE9FF3EAF117F7739CFFEB87442F82
+:10A430009D27EED671B7023ED61B3B7855C6551AFE
+:10A440001CA37B1F8D1D26D846CBA6E454C4395DC2
+:10A45000B26C32367D9A0DB7E6746C4CED6FBAEB88
+:10A46000963421BDFB21200B7C169DAF004DD2A45C
+:10A47000C83CC56B55F1F314CFF81BC92EFF569E8F
+:10A48000624ED8B4DA92F2F7E72BCEBAA3F73D9F2B
+:10A49000BA55262A942BF431144E0C8ABC174CA7BB
+:10A4A0007D5333F112FF7B06D7CAF62DF5E5DA5C52
+:10A4B000684FEEFBB76D1D8B76972DD64FF546FA9C
+:10A4C0007BA7C03D43F98FD7A630EE463F27F3FE6A
+:10A4D000DFA9D31223B762C46BC0F78852A3F22757
+:10A4E000E1235F26937EED4A55DF22B90C74C97CC7
+:10A4F0004F2441E9B1B8E2D8D93EC203E8F78BD383
+:10A50000C53EC4D626CE176DAAC67E31C1E99C26AB
+:10A5100047D8C579B7C89F571FF9609C0531DC053E
+:10A52000D3F1E4021C7FC3DE96644AC3AD3FF3F669
+:10A530004CBA9253A2F81DE9B8FE4FA51D3936C298
+:10A54000A95B8353893FA1F08414F293850A049494
+:10A55000A238F1F1A922DE14D73CC587FF50D83EBE
+:10A560007D2DE1E5DAB0582FCD61C6A6BC36E07A84
+:10A570005F5B632A8D57FB6F074693BF7A295DE0C7
+:10A580009A172F4D11EF2BA050FFAC7497AEE741F7
+:10A5900013E50B5FD2F38C7D974CDCCF98BFB06D89
+:10A5A000A1EC443D28086F3FC479CD76AB4AF24D0B
+:10A5B000780E043FDA131877D61E5C0C14E7FA5DA8
+:10A5C000E095B07D57E2C06F491F060E58553A77A7
+:10A5D0004D706E87541C7F977E4F2B0F15B2C5317F
+:10A5E000FCDC982FA1FDE7941324BDE0F3DF0465A4
+:10A5F0003B5CE388E47712D35DA2EBD5AEC4B089AF
+:10A60000CE450626E15E87E91AA613785E83CE3C26
+:10A61000F6FBBB2C03E77EE066BA9CA4077920E832
+:10A6200084F6C92AF9D104A7C6EB4870AADE8034A3
+:10A6300092AEDAA908FCD06E1E25E73577D8AE6B4E
+:10A640001387EB36B4855D13403F8FFFD5363A8FC5
+:10A650001FAA9383993DFCFE2DE92F6C6B1ACBF951
+:10A66000BD808CA2B66399944AEB54797DE845B5D8
+:10A67000F422C107BAAF67B789F6A1FEA8E70EAA10
+:10A680003B443FAFD5695F92C5F64287D74378F028
+:10A690007E297CEE5AB4D7DEC77C2905B8AE5ED3DE
+:10A6A000A1079AB1DF9F568772E83EE97356FF1AF9
+:10A6B000D2CF573E5CF34821F9DB5D666F25F99DEB
+:10A6C0009EC0CF1887BF6856B745D81D8C1DC8E0FF
+:10A6D000FB8031F3D49ED9F433C2D7FDFB2595CE50
+:10A6E000BDFBCD03E388EE9AF63F5AE8BE64EDFE6B
+:10A6F0008F184F4B19FE1A9A6F765B03DF6B9B0323
+:10A70000DBF95E1BFA43BE9F18F2087F32783AE706
+:10A71000D98608393C912EEC0D06FCE3295EB5EB99
+:10A72000F67A90F6DD58EEEDB875228DBF57CF075B
+:10A7300018EF35C0A131C4F74DF01A97C6F3FEA04B
+:10A7400052417A96FFAEED4E2DA2FFA3E902BF3D26
+:10A750009A2E70667686BF89E85DDFF1B12599D6BD
+:10A760007936348EF6B921454D71C6F12343F61B77
+:10A77000634FB5CA8085FAD79E07F62B28EFA6143B
+:10A7800094DF4BEFB64D598DCFF7A24C5228AEE275
+:10A79000FE94E2EF5EB36F0CF56F78E7F3A9E4C7C0
+:10A7A0001E484FE7F57F7E60FD78E21BEA7F492275
+:10A7B000D9D96E60BF66D86901D929BE5F40FA5FFA
+:10A7C0004CF53CF6CBBB2CDD4BD82EF79A80EC1227
+:10A7D000F59FED01F5DF49F8AEC089F6C0EF4F6691
+:10A7E0003BDFD56DD21827A35F9FC4F5921BA9BE8E
+:10A7F000ABBBCCC9764EF7058AC85EC387789C1080
+:10A80000C024129D04BEA8FC883B99E936FCE5E70C
+:10A810006ED0E3869AE2C575D86539CA3E22E2A4B5
+:10A82000A81B71F4C933DB9E407B81EED428DC0F7A
+:10A83000EF0BBFFF5D3D56D5BD3E775933AEB3EE4E
+:10A8400084CCED07F57D5E58D793437A7E86E28609
+:10A850003A5DDCEFA5E733B04EF75D676A1B4B0945
+:10A8600063CDAED87E98CAB9BE502941C8F9ABBAFB
+:10A870000F9B8599E793FEB51EBA2E9FEECDF59FEF
+:10A88000B1420292D8FAE5C06F5FC4B53D7010F9CD
+:10A890001F274EE17258FF106F8D01CFC8F67EC999
+:10A8A000F023BD4B481FFB5AE5E13A1252838A4D13
+:10A8B000F577D23FDD16C0BA3F437B9F54E2C7997C
+:10A8C000FEF7493FFB4F7E994166B9F7B4D8C7B749
+:10A8D0005AB47CD29FD609B8B58DA3A7AFA58B3C3F
+:10A8E0004FB115E29E4B7EA5C7C19C003C22F1FEF4
+:10A8F0005C760651EE175A65CD82F8E73C0456CED9
+:10A90000237FA3E76FEF01FDA7E11F94CFBD7AF589
+:10A910001EC22B18B7EE7D62C4B9BF89F4696DBB46
+:10A9200004FF846B5FF74CFC7B09465EEBBEB61DF3
+:10A9300047C6A03CAB9E8BEEB761E89E7B88F7BD17
+:10A940001B9AA3EF1B7C95AEE396893091700BEABE
+:10A9500013FB07B3029D56D4DF5732FD9F105E7E76
+:10A96000C924F8847E95EDF213B71E674A843F1A16
+:10A97000B8007C8F286F67E830DDD799DB9CE5A5B0
+:10A9800039E62AA27D6E5B16C719508232DD3798F0
+:10A99000ADF9CB195F07B4D3742F649DEE27C1893D
+:10A9A0007F28BFA3AF6B9D8EE7EE0B46D33D07829A
+:10A9B0008D34CFDA9DE2FED1FA9DF1BF13A8D5C741
+:10A9C000D9F0D4C923940EAC0E45F7ABD5F953DBBF
+:10A9D00016FDBC057812189F117DCFFC4AEF43FC91
+:10A9E000C92CF0C5DBFA3846FBB519C27FD62079F1
+:10A9F00024DF0D4139487AB34E0A240B7C0B8ED5E7
+:10AA000048F75D86BEE8F765EFD6F97397AE2FBCC1
+:10AA10002E7CBFFA192948E78077FF249AFE7B42F3
+:10AA2000ABCB491F62F56A5DB399F16D156CB4103B
+:10AA3000BE8DD5ABAA217DD96EA13816AB4F357E20
+:10AA4000E932740B5CFE7F4BF77A7398F34CEBFFA3
+:10AA5000A7E4A53CD4BDADDFB1505E74A47D08F978
+:10AA600056197AA2AFEBEF5DCFED867CA7C01496A6
+:10AA70006F45DA15EE83A2F1F46ECB509E92F37C13
+:10AA8000839D13383F6EE851EC38E53A2E5FFC1495
+:10AA90007079A1ADD44EF8A2FFB8C92BA99C7F4C08
+:10AAA0002E443E4C3F2003E18DFEF6898F0790FE39
+:10AAB000A213C53752BE7CFA098C3FD8BEA7B3F8A3
+:10AAC00057E45F11E1A4917D2FECCA4EFBBD83C713
+:10AAD000E1F8DD7FBCE8F14AF2C3C7CB8A695C09C3
+:10AAE000DBE97E78911E871A8E17D97B22E2D1FD91
+:10AAF0001922DFBEC5F3FB47695FB078B7D94BF9C0
+:10AB00008EC566FFA604A4AFE805C9DB80B31DE9C6
+:10AB10003EF4248D8BF6A452BE66F1EEEF1DA2F634
+:10AB2000DA5D12D3DFDFBE287F17C5C7A0ECA5B85A
+:10AB3000D7DF7E57C1BD84730EDC537057C47C478A
+:10AB400052855F597C9599E371EF68FB2F2B29CFD4
+:10AB5000A9ED60FFD0FBEA1E0B7F57B04B020FAE92
+:10AB6000F388E7F0AF890FBDFB4E5A08E497B69E15
+:10AB7000B4F4C4F1CF467901B77161CEBF6EB7F0BE
+:10AB80003DCABD7FB0D07A6B9EFB88F369556D12CC
+:10AB9000FBA7AA67E4A04A799E03AF58483F6B9A87
+:10ABA00025C8CC8A6C37733BF951AAFFB159F865B7
+:10ABB00043EFD7E87A6EE8BD61076B74FF75D7D6AF
+:10ABC000683DBF17B42DA3F1FD7B9A57F33DA07BE1
+:10ABD000B6C7F75F861F5C4BFB528C2B6B9F8AEED0
+:10ABE00077DF907E07D8BFC7FAC95732F4F3D83C55
+:10ABF000C823FD1E0CAF19AFA03D7D7EB26A3CC4D8
+:10AC0000C93B1ED7F180118F07C3268E67B1FDFAAD
+:10AC1000DA2E5A288ED676FE99F16B79FB672C874F
+:10AC2000CAF60EBEAF7A3DF837101FAF6FB73B09BB
+:10AC30004757F608BB5FD26E0D06256A0F35917C2B
+:10AC4000FB0F8AEF3B02AF4A8CA340F77F6B757E08
+:10AC5000AED5F9B716F76763E8DE8ABEFFBE2F7779
+:10AC6000C711BAE251A33FDFD0753899F8B8048410
+:10AC70007F5A1212FEC99087115F46C6D1816F9329
+:10AC80003CD7B75BF9BEF852DD3F2D6D16DF93C59B
+:10AC9000FA8BFE517691FFDD2BE88D8DA735ADD176
+:10ACA000FDBB32D2D9DF0FEA78F813C3DFE8F2A890
+:10ACB0001C003BE5E797A8B237C86F752B347FE7D8
+:10ACC0005489CF633BD58929F1EE4B19E59B3ACEE8
+:10ACD00037EACB284F86FD43CEED8EC87DFC8D999B
+:10ACE00002AF54CD910324CF887DCFB2A2ACB8FB84
+:10ACF0001EC844BADF187BD74FA645EE7BB41D397A
+:10AD0000A4673FF23C5E49F78C6A9B857FE89B8D88
+:10AD1000E3A6108E07C6C5B5CDD620ED4F6A514FBC
+:10AD2000F87B30D20FB2BF766911E907EE1B1C9990
+:10AD300048CF723AAAC4F52F6FC3388EC32F2FFBAA
+:10AD40008CF5AA2B5BAC1BF996196F1F61EC1F6A7F
+:10AD50002E099C6A3CAF517A781F51D32EEE49B729
+:10AD60001EFA625C16D2DB7FE03FC6ADC67241A61A
+:10AD700088BFAD25A18FE9BECFE7BB6C71F1E8902C
+:10AD8000BF979AD80E6ACC3D198C57F6232E9C8516
+:10AD90007EF3ED4F79DFD17A28E14ECAC7F5ADF1E8
+:10ADA0008F777E839C1A6013E3DA4DD0C425E19E31
+:10ADB000481CB8D629EE0FDDABC749AA3F8C7A7D77
+:10ADC0002FF65D5014CFEE035BE64923EDDDF01B5B
+:10ADD000D5BABEAF2FD8B1858EE063F151B56E47BD
+:10ADE00088FC392EC6E2A21B33A3F5B4E1ED44C6BC
+:10ADF000B9FD5DB29372C4C8D75F8C26DC87F87E3C
+:10AE0000429C3CEBA7BA5EF6EAE7BE0DB365E69B53
+:10AE1000698E280D1C85FC637DE93FE908521CCB37
+:10AE20003FF8CA0492FFFA9DD1E745243F3FDFDF98
+:10AE30000AB2FCAA43763E4332DA5F3AF8CA14D229
+:10AE4000B386B7BFCC1172F922C7E2BE3C7D46295A
+:10AE50004962FF6B92C4FE77AFD2934CFBAEDAFD32
+:10AE6000B22FF2FEBC21E7BB75FD0145ECF3D765BF
+:10AE7000AA5C6F68177A613A204A9C7FA5C8F3984C
+:10AE800079FE11ED25A82FDF10B780E842D9D79AB7
+:10AE90000758EF6A4F9A989EDA938319D911EF05F4
+:10AEA00068DC4CF27B0D1B80FD881DC8BF2EA5EF12
+:10AEB0000FB1BEF4FD04C65947263C5229CEAD64FD
+:10AEC00020BFF5C0DB559323FDFF053DEE03F1C127
+:10AED0004328E70931BFCE874DB042CF13083DAEBE
+:10AEE000D2712CEEAF9AC88E63F757578A931B0E18
+:10AEF0005881F2C7B51F58F93ED0E707D6F2FE1DBC
+:10AF00002EF927939F01BFFF6A2A1F38B876323D7A
+:10AF1000FFFCE07D5773DE53DA1495AF08107D1EF9
+:10AF2000C2517F79F776C2975D0AE390A2AED3EF64
+:10AF3000D2F9EA9E56337F9B59BD77C6E38124C27E
+:10AF40004F454BE9BB9D3D9D0AEB1FE22A0347D9C4
+:10AF500019479D28661C85E3F8825C161FABA47117
+:10AF60004F9414533709DBC99F4D271CE518C6556C
+:10AF7000063DFF9C29F8D9DF91C0F9130926083D49
+:10AF800083EC28BA37B4BECE3864439B1CF5BD862B
+:10AF9000F1DEEE4C71AEB0D7D0B390A4B11EED1679
+:10AFA000E586B63D19B48EF5E610EB4943B359B4C6
+:10AFB000EF1225D0F9CD0CFED83840FC39468F5021
+:10AFC0002E4B2CC1B184DB770F9D07EAF73982E263
+:10AFD0005E5D63E744FE6E68B0738F3B5EFC394E86
+:10AFE000E73348DAD12CB1CF896DAFF3887CC6D175
+:10AFF00033C22F1E5DE89F1CCF3F06A044ECFB250B
+:10B000005D7EADE68A78E7861B3D22DFB4736CE097
+:10B0100028E971EFEE043E37EC7589FC6C694B97BB
+:10B0200042DF9FAC6F9566503C5A9FFB1E7F9F820C
+:10B03000F562F683E1FD7C6E5ADDBCBB5C8B43C7D9
+:10B04000B51E111F97E8DF018FD057BDFD1478D3CF
+:10B05000F57DDA23745E73AAD2EC14DF9989EF4A86
+:10B060006FD0FDF98DD79B19379D02D52CCE3FC4EB
+:10B0700039C532DD2FDFA0FBF911DF3B3F039BE930
+:10B080009C22F67B67C3AFDFAC8FBF02341E37F65E
+:10B09000BBF59B753C78B32FFAF9A54C1D07E6402C
+:10B0A0000EF9F310C617BE1F9197C0717A69E1A41B
+:10B0B000B83883BE0357F5EFC0A934E4DE90F71E1D
+:10B0C000C7BFA31D677ECDDF139C49800971CEC524
+:10B0D00086E39FE13F6E12F2D6CF2DAA9D824643B2
+:10B0E000EE17700716991F33E43E46E7FFFFF13D68
+:10B0F000A05C5022F325CFCAFE311E3A9FB0F53234
+:10B10000FEC615701CC4758DD3D735CE1A11DF2E2F
+:10B110008C5A1D577F87D7971A1071C4CD65479EEB
+:10B120009571627548E2EFFBAAC3625F5B5D26F62C
+:10B13000B539AD02A7AEBC490A6A12BBC3D3449F5E
+:10B14000A13FCB6C020F187A32C42F5D7FA89DF00F
+:10B15000C10D3A3E88D5A3C9D05D4EF9E65B34C92E
+:10B160004BF72A477C3FBF6ADAEBE4EE2FA73FA8F4
+:10B170006FFCEF22C4EAD1F73DFE120FE5D3BA0708
+:10B180005716E2B847F3FE388EF4A6E63276F32D72
+:10B190008F88133B1D81A37CDFA4453FEF6FC96BF4
+:10B1A000EB217E7402E3C75E57F7963A81ABF9BC98
+:10B1B000BF3A9CC0DF4356B7DBF9BBB0EAD686C4C2
+:10B1C00029E47FDB65AF1DEB95AD27CB889F95C547
+:10B1D000E23E4AAD5DDC8BB3B9FDB7107DD77B3B5A
+:10B1E000A2CFF92D3DBFA8FB063D8FF56B1B09A330
+:10B1F000A5FFF7F99B8D3A5FEABA2E664CC1A9FE0E
+:10B2000090E6AF267DEC7FFD450B1DD7D54E79A589
+:10B210009CAE886DF4A8DCEFFAE68E264AF31AF4A9
+:10B2200077643AF9F95173702CE3D2822BBB0FD3B8
+:10B23000B0FF8DA914A7FA3ABAA65A22F4BBB70EEA
+:10B24000FD731CF9358049B75B854B495AA1E3254D
+:10B2500061C7B5070E67503EA297ECB780CA7792D8
+:10B26000B3B1ACDE7D2A7912E196BDA21CC219ED04
+:10B2700032F703A527E7E6A448FA36337D17426282
+:10B280001C809E9C1B0B23DB1BFF5FDBFFD3A427D3
+:10B29000D5B69E28FB37F884BB7CFE3E3770D0CAFB
+:10B2A000F708E8BCC61521C757747F340B374B64C9
+:10B2B000A773E87C7A22413B05EEA0BA026125958E
+:10B2C000CE8BC3B2B87F3796FDF74C7DFE594AB896
+:10B2D00083EEE9CED1CF37E74237F75B00035C6AF4
+:10B2E000E0E4EF8B4BC0CBE56C5B7829C1F1825079
+:10B2F00088BF9F096728AE7336FD3BE638F21EE62D
+:10B300009B02E70C7EC8740E26EE1BC5AEA75BD76A
+:10B31000C7599AF03B041DE87EEE6C08F1B9FB3585
+:10B32000D0A39FBFC75FC73CDCF7D1B9DB35683B13
+:10B3300089CC8F20F79F4FEB91E3ADA767298B193D
+:10B34000CA9C449F14CE307D6DBFF275F4D36D4D11
+:10B35000CA57DF35D0F783E2E1734B6FFB1BEFD3A6
+:10B360007D6249D3F8BEB197BEC7A67D4E58E91D90
+:10B37000F2631300FEDDB3E637646FC6F71AE00729
+:10B38000BEE711FBBD062DF77CC6F03D35E3FEEDB3
+:10B39000CEE00A95EE6FAC72DBF8DFAD29B28D9B83
+:10B3A0004E79CA87D2FCBF21BDFA406A9EC4832869
+:10B3B000C1198C6375BDB283369BD62F69C6F7223F
+:10B3C000C0FA32F4EF0164007FB763B78AEF691EF9
+:10B3D000413DB4A5B2F6AB740F1A1E2E55092F6F5E
+:10B3E00071D9BCF45DAE95E8B50FD3DB6813F72FC8
+:10B3F0008CFB6BB17C6CB419794AAF8D7176CC77CC
+:10B400003E77DAFCFF9BE8BF3FA924937060FECB38
+:10B41000F33D7C3F29C15877898DEBC3F71A193763
+:10B4200036D17D6AA4AB311DF81EE2E1A49C14BAAA
+:10B430001FD5D825EE5337A607D87F9BFD12FBF307
+:10B44000C6CED24E8A07830E0BDFAB6E74F934AAD8
+:10B4500007D22144FE9FF83EDFE0BB6998EF21FD53
+:10B460005E5091EDD75751DE7F9A1B4AE9BD696165
+:10B470006D12F1C0F81E06E5E019954ECFA3EF7BE3
+:10B4800081E2E4FB17861C503158999DBA7C0DB9B6
+:10B49000388DEFF83525EA3B7E435E8F240AB99854
+:10B4A000E926CC447E57A57163E561F0FDBF008FAE
+:10B4B00040AEB13049000000000000000000000074
+:10B4C0001F8B08000000000000FF3B24C3C0F0A356
+:10B4D0001E81EF4A313030F1A28AD112EFE364606D
+:10B4E00010E062603005E2FB3C0C0C3380F44C2031
+:10B4F00016E566601003E21A20DE0DC47B80F819A1
+:10B5000050FC3910EF00E21B3C10FDBE4C0C0CFE51
+:10B51000401C08C4C140FC958181E11B03F1F67316
+:10B520000A33304C1547F02F03D99F24E9E7FFC1B8
+:10B5300086430CE96BDF71A07DF3AC107C46207B69
+:10B54000BE15AA9A0556F8CD588826BF088DBF1893
+:10B550008FFE720354FE5A4D34B3B581E90949CDCB
+:10B560003A4DFC6E41C7AA40FFA9013100ADF15F21
+:10B57000CA68030000000000000000000000000096
+:10B580001F8B08000000000000FFE57D097894D5BE
+:10B59000D5F07DE75D66269999BC816CAC4ED844A8
+:10B5A0000B7442421A10DB618B6811834B051798AC
+:10B5B00008644F2620F5C7DAEFCF40005151438B86
+:10B5C000355AB40304051B34D88041020EE0822DA5
+:10B5D000D5D86A5DDAD2A0C81A93801BFE5DFCCE76
+:10B5E00039F7BEC9FB4E2682B5FFFFF5FBFEF8F822
+:10B5F0005CEE7BF7B3DD73CE3DF78EE218C7948B1C
+:10B6000018FB12FFBEC798DDC6181BD79D32562304
+:10B61000D24A2DCFCD58D003FFCC62ACDCAD85979C
+:10B62000A7333665871AF95E12E43748613BE46D4B
+:10B630007B9D54DEBE9EE7236ECDCFA0FCA33AC80F
+:10B640004BD0DEDEF2C06550DEB943661BB1DB9144
+:10B65000713696C2D83107E37F5990CF66ACC0C926
+:10B66000B3E51BF6CDC5F6454D76E684FECA7715E3
+:10B67000CEBC0CF28507558655CA372FD3FA43BE88
+:10B68000382C3560BE63329F5F68A71CDE0CF53B2B
+:10B690003C2D2937B8183B55E5605E8DB16A774B74
+:10B6A000CAF5A3182B096FCFC57625F5920F973AE7
+:10B6B00065C7E697FBE1BAB64A3EBB97B1D22DF11A
+:10B6C000CC3B92CFE14BF8FF58A31CF91E942F8678
+:10B6D0007532E8B790D5E43219C75FAB79DDDDF09C
+:10B6E0003B55A5D33846BE7C2B8C03ED2A9E967C19
+:10B6F000B8C40A1B0B34C0F8EDBB9CB337B9707DDE
+:10B70000CBB4116E5CD7DD1AD62B0CE7EF747A71CF
+:10B710007E1BB45C282F59BF412B18D5DD5FE996FD
+:10B72000BED679D50E4D0D98CAA3D353558C794703
+:10B7300074E74B18F33740BF4C096BB346777FFF74
+:10B74000802532968CFDCBCCEBE8EE1F2049DF4301
+:10B750006FC13F015EA13D6E82AB81B7C53AFCDB94
+:10B76000DB8DB7B3BAC0A3D2996DEEDF481F403C62
+:10B77000C07C6A104E90AE11F3F34C649314E8DF72
+:10B78000E367BAC47A5F8F91D6A82C9FC1580B4249
+:10B79000A3FDCA78C86B6C11F331F69315D9FEA9D5
+:10B7A00090BF9F05E6E2BC57488122C413630D6930
+:10B7B00048BFAB24361BD7FF039C3494AFEA07F491
+:10B7C0000970AF9996BD4996C4DC93305FF0C4BD53
+:10B7D000E9D44F21F5A3423F43CFDF8F9E9B63E91E
+:10B7E00047CF2D32FAA9A47E9C17D64F4DEE04EB1D
+:10B7F0007C724B8C7EEEA47EDC17B62EFD8A89D639
+:10B80000F95C5146FD244EF5B100D4970D7A602DB8
+:10B810007E19CA5DF58963EF6566BA98BC12F9DFD7
+:10B820000D5C62A68B849C380B1D26FAFB58F2D067
+:10B83000937EEC5B220F834412351A5FEBAF915C71
+:10B8400098D4DF41F93BFABB482EDC312170B10EB0
+:10B85000F3C0B1593FC86B816FEB31E81AE629B1EB
+:10B86000344CBD364CA3CBEF56391C260FF8DB8881
+:10B8700023D03E68EB1C9108F9F5D2A45F205C361A
+:10B88000331BC1274E6695582FCECE483EDD9D9E78
+:10B89000BD296482D3EA41807FA9BBDFD56A200D30
+:10B8A000E96B2BBB2184F4B66A10ACA73F634F85CC
+:10B8B000AE8F8414683FA8200DE169D780BFCDE327
+:10B8C0006B30FE281AFF191C77078E3FAEE7F8F69B
+:10B8D000213996F11D838B2CE33B34181FE87D172B
+:10B8E000BB558C0FF09BC0D8F3A15B687CFBE022BA
+:10B8F0001AFF6E8D1559C68FEB1AFF051CF7A5DED2
+:10B90000D63F648275FD834BACEBD7F8FA5F650BCD
+:10B91000C5F871B4FE5F8716F0F50F2EE1EBB7F3B3
+:10B920007EBBC6F774C1FF751CF7ADDED63F74A2AF
+:10B9300075FD179559D76FE7E3BFCBCAC5F82E1A27
+:10B94000FFBD50195FFF456534BE660FF8908EB499
+:10B9500001719561189F0D0486482519E5A7746447
+:10B960001FC6A0FD3A3684E070471CA7BBCFE2801B
+:10B97000DE5CDDF28E8581A3409E55089A2FAD9F37
+:10B98000A4A19CA572907B0BC5541734C9B4DFB039
+:10B9900075F6F070986F7B931CC2FC827597876573
+:10B9A000DAEFD8BC3C6CA7B0087EFFF0A1D11BCD6C
+:10B9B000EB8A4E17D6A8C75A2D7CC4E7139ACC46FB
+:10B9C00056C2FCA621118CEBCE1F0339CA407EBEA5
+:10B9D0000F7214D3E32A8C07DF8F829C659A996FCC
+:10B9E00096F17D3CC4DE1C99827282FF1D5338BCE7
+:10B9F0008F2D91C208FFCFD62ED2503E2DAC890795
+:10BA0000A077CF2328F0D4B9CB1EDE28113CBD0887
+:10BA10009F1B891519FB33A0B51F80B6B0B6AFA523
+:10BA2000DD2D2CBC320DEACF5F933F4887F5DF3C1C
+:10BA3000DB3E56C6FD83F907D8888FD9005B0E63BD
+:10BA4000B31BD7AA032073E36CF5FD5653FB3901F2
+:10BA50006BFEE6226BBE5D0DAB36D4378A25B60190
+:10BA6000FABDB5D25A6E8C9328F5E17815E3FD2026
+:10BA700085CFF7564CC7E2679DF03A57E76D8DF9D1
+:10BA800004EF525984F6CBD66446F84FA67A019D4E
+:10BA9000AF3B7ABE7355873F0FE633F74E99E019F7
+:10BAA0003DFFD6BDF17EDB18486B3F569104A3D70E
+:10BAB000133DFF794BA3D7A3931E961F8AFECEE9B1
+:10BAC000249A9E824D93FA1E35D52B6FB8B2EF5152
+:10BAD000137D956E9965C91787E758EA17D6E65B17
+:10BAE000CA17D6145BCAE7AF5E64C9E787EEB4D461
+:10BAF0009FB77499A5FCD6CA7B2CE53717ADB5E482
+:10BB0000E7041EB1D4BF71F6064BB96DEF25D720FF
+:10BB10001F55BF2533DC373E751D7B00F5C14F5DDA
+:10BB20008A0FF171A22A8DF8E0549597D2F6A64CAF
+:10BB30004780CBC1025471162E6B08AD9E88729956
+:10BB400091FC2C5EB633141A08DAADE425F8C9B5B9
+:10BB50001A8B00094BAC4F171D77CAA6F2D6F39487
+:10BB6000D702A367F62C975B637F0F6ECCBF08E507
+:10BB70004E6FF200FE06E03ED721F6F7E8F232897A
+:10BB8000E599BF33B69CF8FC9C90B3651A9707659E
+:10BB9000CFF69BCC3C988F8CA8FCAAF11A00A82861
+:10BBA00027513B4F467A002EB0D0CB500B7FB7EDDC
+:10BBB00093695E152813C6A3C8C95B23A19C891C81
+:10BBC000187CDD689C87FF7E09F9AE2999F6F5B6E9
+:10BBD000AAE97D8F2A889F3C4A4F54CDA6F4585538
+:10BBE00080D2A3554594BE5F5549696BD5524A0F23
+:10BBF000578528FD53D56A4ADFABAAA1F49DAA5AFE
+:10BC00004AFF5015A6B4BDCA4FA9C10F5DF237490E
+:10BC1000E8ABC2AE809D87F267C55A5640DD16E29A
+:10BC2000735F1AF2F959D76723501F3FFB8E9DA10E
+:10BC3000BEDF1BBCA2E9AD773CFA495F290803FED1
+:10BC4000337B963BE3389E9C36369D813CBA67F841
+:10BC500013BEDB46515E4192810DC937CB1DA3DF78
+:10BC6000618CF0753E3C317FE7986B011FC71EFD6C
+:10BC70006B36F67B4EEC7F710764DA875964930F5D
+:10BC8000F165821BED6B9D3B84BC3F0FFC3EEA825D
+:10BC90005FCB6006E9044927FA3BDB68670AC2B15B
+:10BCA000393E0CC4CFCE1EDCE4417E5C9C66D38F53
+:10BCB000C68083919637A4EB2EF3FED364CD9FAD5F
+:10BCC00091A637903CF6265C3F1AE94AD78F0E437F
+:10BCD000FCA7516AF4B3384DD38F02BF9EDA3234D9
+:10BCE00081EFDF61BE0FD62712BD825D48F5FFD51B
+:10BCF000F3E9AD1F633E8C35B20F1C280FA06CE832
+:10BD0000F9ED9D1E78573ED1F2105FCDEA67A82F5E
+:10BD1000C4C1FF5F0EC17E15CA1BFD061BE490FD6A
+:10BD2000DBF8BDDE321EB4F31A3637B6EB9D6E1566
+:10BD300076CCA02B90571A1ACB64273A75EBBE929B
+:10BD400068C9079BFAE9967D06FF01FC0F82524104
+:10BD5000BA291354D4A1B8564B30BF23283F012F22
+:10BD60004189D72B77B46A012F91630BEA19B7E5A4
+:10BD70001874E7BDF18F20EF4FFE4665F762F9DFDB
+:10BD8000605650AE1AC520F76C909F2F72B735964B
+:10BD9000CE40B977D2C6F7F9052CCF83464F11AB09
+:10BDA000C9463DE723669B8EF4FF11FB9D27D364B4
+:10BDB0006FF86C1AAD73FE6AEB3E0BFA99255F586B
+:10BDC0006BCD17B06B5390DE0BD6A92C2C215F5A8C
+:10BDD000CBBD369DFA2D6495ABC8DE417B05C6BD53
+:10BDE0004D67CA00985FF9738F65E743FE3B36AE37
+:10BDF000A71BF67B711F3EFF92A4B0E687F20F1AD5
+:10BE0000337F7019C3F6E15528A7426EE6DBCC7A82
+:10BE1000E2EFEBCE3F7ABEC67ED2C38F20E6216F23
+:10BE200091FCE11876DA349B24F4AD10A537E0BA22
+:10BE30004D7A6BBE8083912F8FCADF1995FFA7E9DA
+:10BE40002D8959E8ED8814C8B72573FA427D41520F
+:10BE50003AB5C037E93FAD47FFE5FFD2FE0742FFE5
+:10BE6000D996FEEFFC97F63FACC7FC57C6EABFFC7D
+:10BE7000B96D3B43206F4A9E79C8C3601F3AA9D46D
+:10BE8000A4F800EF659B577A900E4E28210FD2F34D
+:10BE9000C9B03C3D163DEC467A203FA2DF25A15DAE
+:10BEA00085FF84FE4F3D75DF4CDC673EDBACEA640A
+:10BEB0002F6DB147ECC0AF158DC533D818CA1FE13F
+:10BEC000F9BBCFC8986FB2D267C9930FA5A0FF0D79
+:10BED0002845D81311D2972AEA3ECCC57D28C83A06
+:10BEE00089CFA2DBE1F8E7FA907CCCD7127A96C32F
+:10BEF0003C49CF0F0AB8041BEF3B23A3EF93B57265
+:10BF00003F6854FD22A1FFD4DBDC49C7C07462DF67
+:10BF100061DF417969C08385B9FE53BDF5E13147E1
+:10BF2000603E6D75BFF1482638197C76B661FE2FEC
+:10BF30009EF7F62E8FDB859DD7DD2E4CEDBC4D4256
+:10BF40006F6BE669991AF1A05E5CB641F585E07306
+:10BF5000D9B64D4F3C8A76EABB76DF70E8BF74DB1A
+:10BF60004B7F9800F9D2ED6AD20CBE0C9794D28D1B
+:10BF70009720FCBF746C371E4A7EF592E61DCDBF3C
+:10BF8000FFB84F373E4AB7EFD3D8E89EF098D2B00B
+:10BF90004F6B75C5C04BC3915CD4AFAAB77EAEA141
+:10BFA0003D7972AFC452D363C073C34BA427209CA6
+:10BFB000088F024F5D788BAA1F04BCA03C37F01499
+:10BFC0005DFE80903FD89F7714D1F3D3CFA35FF964
+:10BFD0003DBB0FD75FF4F4ED1E5CC771A592D3F59E
+:10BFE000632B53FC306E911A4AD129E5DF8B1EFF7B
+:10BFF00021D15BE11B3F4CE1F6A0BF9F8DF6A6501F
+:10C000003F5CDFC2F537D0FA0A5880E8AEE8313934
+:10C010002F0CE9A70A9BBE3D065F64C89C2F8E6F5C
+:10C0200004850BD6771CED12F4B3FE4E0E6F267FFF
+:10C03000C82286FCFF43C33FCE1653FE5307C79367
+:10C0400043B609BE026DCF4CAF7577B7207E4E0D5B
+:10C05000F2A7A21F2DC894908087F425F42BBF313E
+:10C060002D95E38779956CD10EF48029F81DEBB7F7
+:10C07000A87EE7184B3BF6657AF7F84BC4F830EF2B
+:10C0800038DCBF8FA7B0A28618EBBB5536F81EF67A
+:10C0900071137D99F89BF37BDD3D9CBF0D7E0FCF27
+:10C0A0009A8EE59FBCC9F907DBE1FE08F38AA4522A
+:10C0B000F9BEEB259207761689C5D775AAE06B6B9A
+:10C0C000B94127306F454A30D10BF6DF87E04FFE8C
+:10C0D000B38275D0CE242F83389EA7677F06DF16E4
+:10C0E0000AFE1F255BF99FADE77CDFBB7E15A27DB5
+:10C0F000AE4C0D3FF128F22BF067C88BFCAAE6E1AD
+:10C10000BA4FD71FF8C34DC0A7A71B0C3EB5CACF67
+:10C11000683E2D7A76B384F419CDA7A78B401B898E
+:10C12000C5A7F03D269F16B5FE3F959F06FCAE8F36
+:10C13000829F210F7B8363B43C3C63F3123CA3E5F5
+:10C1400021FCBDC9B27BD29F417706BD95FCB2FCF4
+:10C1500022F217187469D05D175D1A74D7C3FF6295
+:10C16000815F74F960A405A093BC5D2AD95565CDA3
+:10C17000FC3C0CDABD3C208BE0E4A76D8CD5BC3CCC
+:10C1800020C99C0F47E51BA2EAFBA3F27951F503F6
+:10C1900051F94A4BFDB2A6031A23FC472CF5EC4B90
+:10C1A0001F651FC4B0878CFD26D878460B215D0C17
+:10C1B000ECD450DEA9CB410545FFE01E99ECC50E3D
+:10C1C00080F12A18A7A33E3D1C02B9B1D2C9EDF0F7
+:10C1D0000EBDD3D307D295893CDF99ACAD42B96788
+:10C1E0007CEF74723F47475EA727D1E4A738D22C73
+:10C1F00093DC6E0DB3E9B1FC20B0A310DE5B596F88
+:10C20000E5DCFF394D760D5E8AF6688DEC431377D9
+:10C21000C1B21B3DE82AE9681E7ACD6CF8BEF05524
+:10C22000998E553AE23C63705E2CE457FA99EC899A
+:10C23000132CF4B389E8CF6CE676C5823551FA0841
+:10C240005B43F454E05AA2A13C053BE07DAB3F9731
+:10C25000F34589E8AF68BDB5DC688F275A68DF957C
+:10C26000D459CB03C23EDA65F04906CB2039838628
+:10C270000FDAE7422E4F93475D331BF0D1715066C2
+:10C28000789E79B659267C9CADE7E7972C944CFCB8
+:10C2900056C13A491E1A706A437ED27A97576D3B4F
+:10C2A000FE9C7D17D2CDCE3F8EF939A46D3BDF1DAC
+:10C2B000B11BF3CFBD3DF88FAC67FD297B9DE43703
+:10C2C000EED8EB267AEFD8F3DBC177617E979DFC41
+:10C2D000751D7B3F1F83F4D7B1DC5E84F2AE631023
+:10C2E000B787AAF77C3EA695F6D71584B7A3B2C642
+:10C2F000F5A3E6BF1E9692308555A1DEB0379EF8B5
+:10C3000029F8BC93FC0B1D7B3ECF0EB8FE75EBA944
+:10C3100010E7391D6E36FB599C5F22F78307778F34
+:10C32000DFB40CCFA31BF769F3A17CCA0B7F1F837B
+:10C3300072B4E359AE0FB5ABAD8FE3794587FCE13D
+:10C340003215E0DC8E4CD59FB1FB94119343A36270
+:10C35000C1E5EFE437B95078680AB74FFFFDE12136
+:10C36000F9B9BC73871D12AEFB8BC37F44B9B0D73C
+:10C370004E7469ACF774C332D257CEB7EEE1CA7FC0
+:10C38000173AB8D0754B910B59F7D47F737CFF5A8D
+:10C39000F6D2FCA2F9A0279DEFB983F2DBDC3E9A2E
+:10C3A000EF05D2FB82FF69787F16F0EE39FFBAAB5A
+:10C3B000FFCDD7DD3BDE5F9D2BF0AEE3797FF085CF
+:10C3C000BFD3FCBEAE9CDBF4DF94EE0DBDFE159B2F
+:10C3D000F7CD0CA83F9DD5B850B1B8B27CFFAB19D2
+:10C3E00050FACAC0038938DFC951E73746FAA6C2F6
+:10C3F000EDA6C9928DEC419628097B90DB51038410
+:10C40000FE30604901E9210306DECFF506C5BB0E0B
+:10C41000CF1F5F193CDF47B1146CEC3B01CCEB97AD
+:10C420008BBCD59EFCB9C4FC78343A60F0F70FA2FF
+:10C430005E3B70A04C7A2FA4A4EFBEE899CEBF97C4
+:10C440006916BBE74AAFD50ECA4DB2DA4B53457FEA
+:10C45000D3189FFF3497140E031C260FFA6912FAA3
+:10C4600047270F579904F95C165881F6C55497B5BC
+:10C47000BF063CC319F7CDE168570D380E599787B1
+:10C48000701C24939FF4BC70C47913DC32C2182F43
+:10C49000C3141F87639F721FF99D85BD4D474D9043
+:10C4A000575CAB5A909F15B497391CC8CE36ECE553
+:10C4B000DEE0CD84FDAD88210DF82B0365BFD3DA16
+:10C4C0001FD9DF065EBE2E3E0C3C7E53BCBC1B85D6
+:10C4D0009781AE450AF2EB74B417FA62FD0C9E1F09
+:10C4E0001852E8DC4DD80B57781729A4F70CCC501C
+:10C4F000105F858EA6ABF01CC4E193681E17B7D9F8
+:10C50000687F70644904F791B50AE5DFB0E9E3108C
+:10C51000DF332F7BEEF49D0CFDE67E8DC73DE5F10C
+:10C52000F38FBF7DF9E5448C1714782C84FFAF4658
+:10C530003FFF7A168903382D545828A10FFABD25DC
+:10C54000F6BEC5EF6DCDE3DF7753BAFB395FFDDE95
+:10C55000E4CABF3A7D0EE4D8FB00F35D980EA3E178
+:10C5600015B35DFD9D660EAFE021161EC2E32AE401
+:10C570003CD339E11D82FE9FFBD3B39968D74EEAC5
+:10C580001895C0E5EB30B21782C25E38CBBC093ECD
+:10C5900017CAD7A10974FE795076C78A2BDC2AEC1A
+:10C5A000ED5F627C09A41D75AC4646FB8D75921F3C
+:10C5B0003754E7609B63C4B7E4AB869F4AE00DFE47
+:10C5C000E46C3C8FE1E32F84A60966BCB5CD38A9A5
+:10C5D0008CE98907FC7BDF741EF54DE18BF63DC2CB
+:10C5E00077ABB335372F86FCB85DC06FE6FE2FC83A
+:10C5F000FF7969F3061BD2EFA57536CBF96AA92A34
+:10C60000ECB1B16C2CCE6BE67EA73B0BF17250F611
+:10C61000613C67B0F98C1688712E180D4FEC1FFD28
+:10C62000E95B559DF86BB7DA301FE1BAFB2307438E
+:10C630003B7A9756531A6B9E03EC7C9E0B59C3EDC5
+:10C6400063D2FFFDE03BA9C315998CF6671D137EED
+:10C650008F68FA6344C767B7B030EEAF68AFA25CCB
+:10C66000385BCF687F0790DC8F7637F0FBF7CC7EA6
+:10C670009C8B9BB6FF12F5828A6649C723860AA562
+:10C6800055433F6DB02951C67D38C36BC4BBEAA387
+:10C69000AF37F1C5565521F81E98B0FB661CF7E37D
+:10C6A000368DA19EE27FB1D383FBF8C7CD99C40735
+:10C6B000BDADEB5755ECAAA948372A9787D1F4307E
+:10C6C000AA3ECE92BF4C0EF447FE9A696F5DE28B94
+:10C6D00081BFEF6B923817BC40F916FEFF4CBEBD10
+:10C6E00069C8B7809C67E2A3BE5A0FF9961A4BBE81
+:10C6F0002D96BCA908F7C57B86A6225E17BFAA2681
+:10C70000C7926FDBAAF839E733224EB9A311E4DBF5
+:10C71000B74DF2AD11E45B8C7890BF5FA87C0BFF46
+:10C72000D7F0DF36946F31D6AB6B56F936A6F908E1
+:10C73000C9B7318D364B3CAF5D3B9F7C9392AF4781
+:10C74000FDF8A0EA8B8F413FDB843EFE8C884BC412
+:10C750007150CEE56A3A8D7FA172EEE20B9573FFC0
+:10C76000457036E4DCE21D8CE29C7BD22197738B12
+:10C7700077819C93901EB99C5BBC8771BF5C947C55
+:10C780001BD943BE31AA5F11E1ED834DE90FDF02F2
+:10C79000FD8DF5AB3E07D41FDB2DEFC699E55DAEF1
+:10C7A000A610DC7AC8BB831726EF76087907726C6F
+:10C7B00008CAD768FAF0355BE3C1778F3F5EFF2B7D
+:10C7C000E497DFCA74DEF8868D9F0FBD36FE7816BB
+:10C7D000D2D763623E8B84DC6BAF0A51FF535EE4B9
+:10C7E000EB2B77F138F18A46AE1F56D44B612FFC04
+:10C7F0003377C2171ACEBF788FC452213FCBCEEB0E
+:10C80000B3278DF3323623C3440F0B724AC9CFBF0F
+:10C8100040610EF4E397BA724FA2FE5B9AC3FDFE2D
+:10C82000A5E27BF1ABADABD0FF5DFC8844E7A5464C
+:10C830007CAB11E7DB236EA27919F977A3E32766B6
+:10C840008AB8A999BF94C21B62C47F946EB1E67F77
+:10C8500022F86F96DC4AF062AFCB31E3388C7A5D18
+:10C86000703A28E05427D37EDA0527809B37BD270E
+:10C870009C00D3333252BAE152FC5B586F56EFEB57
+:10C8800035E016BD6EC37F5D2AFAE90D0E069C7B6E
+:10C89000AC5FC01DEC029293D1F058A775F9B53387
+:10C8A000314E09E886E44CE8D70017182F6FD27094
+:10C8B000CB7D974705FD64D64C9A82E10CB330AE30
+:10C8C0001CCA0B6A17BDDC0FE031EE1DEF58DC4EC1
+:10C8D0002F9B600FE039EC566727C941830EDB358B
+:10C8E000AE071C14F0DDDDBF7232D9F94D928E7A9D
+:10C8F0004830E224B80601AE78FF28A870FC068113
+:10C900001E91FF0E3CF21987E31EC98BFE9D5C63EE
+:10C91000BF42BC40FDCC668E97605822BC64B14ECD
+:10C920003A7FA9A8957C11845FD306829F219FE15D
+:10C93000CF65C693897E9558F44B954CFB65A9A8A5
+:10C9400037D35EF307A4E7994FAA6C03811BFEFB64
+:10C950002A7A3E4F1C50349EDA04BCB6213C5D0856
+:10C96000B74EAE7745BEA0FB504679500959E03925
+:10C97000E5D1735F09AF7106BC908E51BE35E7CB30
+:10C98000982F689258DFF49EEBC5F35033BF17EF32
+:10C9900039C2FB7F4CF2B118EBBE60BAEE859E8BBC
+:10C9A000806EF1BCA437BA8E86533BD2F3B7BAE996
+:10C9B000F93567E7A14CA4E73D12F74334275ACE77
+:10C9C000353D761EF7B5D509740FEBEE7C55F56D48
+:10C9D000F4C690CB82EED17E30DF37BB041782F1F4
+:10C9E000A25B1C14EF47F318C2F553B37CDEE66478
+:10C9F000C9D767F5DEBFDB2EC58C2737F423233F6D
+:10CA00001AC7C3F8F926186F64F778D1FB83E12FB2
+:10CA100038DFBAFADBBFD9BA8C71BE6E3C5490B520
+:10CA2000105E8DB8A82352E0472AEA73D3254BFC49
+:10CA300015CC5CC8AD6FDC7FAA96DC7BFF2C4DA7C4
+:10CA4000FB74B7EBC6779DE8334F67E27C6FE2DBA0
+:10CA5000B8EF7FECE7E7985936F6D644DC3F26ABD3
+:10CA60000CE9EAE3432AF9A13F9ECAE36EAFF9ED70
+:10CA700001055D3ED7F0983876CD3889ECAC37B0FB
+:10CA8000EBF1A8873B987F04C12F13EFED65D4D558
+:10CA90004CF1025F8FDD12AEC6D437A533E935C441
+:10CAA000DB249921DE5AFC7DA7B8207FFB872C036D
+:10CAB0005DA0A01F50FBB1075932D69BE04F263333
+:10CAC000667CE3276F5E07F3187F48F679A1DEAC3A
+:10CAD000032E17037D7AE47A1B0B98E0358185AB32
+:10CAE000D1DF34FEA8FF3A9C7711E83B784FA4A829
+:10CAF0007943B507F3EB256A1F0C05723DB09E6DB7
+:10CB0000B56772BF857201EA6137C1F5BC5EB04E90
+:10CB1000F261887241F35A8A2F2AA893E842E1B65B
+:10CB2000B0C41CBCDFB003FADDB61EDA67E1FE0557
+:10CB3000EDB1DFBA336F5E877207E649EDEBF9B905
+:10CB40007C01B4F322BFD42DA2FE8AD74B0CEFB3E5
+:10CB500014D5F37DA9E890EAC3F2C67D8FD07E3B61
+:10CB600003C6EB978EFB50642ADD0BCA9474BA2F70
+:10CB7000191A4CF8EB601C7F6CFA20F20B52BCAB1C
+:10CB800097C0A098E363FE641F42F2B3C0B74CEBBA
+:10CB90000BFDBC96939C6E23BA3A43E7ED4701DE4A
+:10CBA0000180F71B225EE540CE075AAB695FFCC2ED
+:10CBB0003E949F9B344DA2388E852C8FE238668E32
+:10CBC000E7FAE6EB973BC3E8E77B5DED1C88DF0FF8
+:10CBD0005C6EA7EFEDDBB81C6E1FD44AFEF6E3EBEC
+:10CBE0005586F758AAD7CB242F8ED7AB743F567EE5
+:10CBF0008CC731146EE3FAC781F5BCDFE3A8B7E157
+:10CC0000B9079643BE70AB11E7C0E5B4617F16E883
+:10CC10003CFEC290BBE562DD3DF6A175CB3424D964
+:10CC200068795B2EE471098B90BD1C2D77CBF11CCC
+:10CC3000DD837C191D27E6EAB663900E225F105D46
+:10CC4000571C5219DA31D2076DB91497B647A2733F
+:10CC50008BF1CD921FE31A8ADEB18749FF0EE7CF31
+:10CC6000FB11EE2FEFDA19862C1F433C809CCAB1D2
+:10CC700077FEE9A7F0FDE41B0E8C0802BAC927B8BD
+:10CC80001B71BE599B793C4FD61BEB52F03E2F9B3C
+:10CC9000DA97E44061ADCC0226397152F25F771326
+:10CCA000DF1F74D4770C7C66693505B8BF7ECBC1B5
+:10CCB000F755EF66156364D8EF843D04F6811FF5E0
+:10CCC0009BE25D6B5334131D14EF599B22C3F75540
+:10CCD000221EA61AF7576857ACF1718AF74AFA066E
+:10CCE000D338463F46BFDA2EDE6EE81E9EF6D67F6C
+:10CCF00031CE8FD6F9A986F222BA9F1EE3F7D24F22
+:10CD0000CEEFCFAD93605E39AFCB14AC9EF3C18C48
+:10CD1000A1E6731D2335FCCAD96FDA98DF04BF9CE6
+:10CD20003FC531BF09DF8DE380EF017F5737496190
+:10CD3000A784F9235A7916E575E4F30AE17FAE98E2
+:10CD4000CACFEB1A33DE58817C3F234B227A60A195
+:10CD500080D63789F4352FFAFD0BB378FB42688F04
+:10CD6000FCD8F808E74F90135E942315EBD7E652F2
+:10CD7000FD3AC98BFD376EC8277DA4284766545EEF
+:10CD80007784F4A3A2A62349C8C7C0B7EB501FA855
+:10CD90009868D7518E1BFC68F0F7EBE23E2B73E8E6
+:10CDA000A3F17EC6FF46E68BC1D7F2212ED783F5CD
+:10CDB0009C1F83399C5F5FDFA6E20A2F84BF899F97
+:10CDC0008F6FE1FC2A3F76432EDE872FDCCCEFC34A
+:10CDD0001F583F45437DFA7858A2FDA6277F73BDB3
+:10CDE000359ABFAB25BEEF7D5DFDD2E06F838FE14D
+:10CDF000EF6A1CAF0CF814EF4F46F3F54CB5E10F9A
+:10CE0000B7C37CAF791AD603F39DF2DD3B3DAD2667
+:10CE10003909F914CC17283C9ECB902BE50A8FFBDF
+:10CE2000FBDAF38B1A3F6CB7FA477E674FE4F1EBFE
+:10CE3000752AD1FDF9F8B3079F5D207F5E285F9DBD
+:10CE40008F3F8DF1E53DD67E7E27E82DBABF7680F7
+:10CE50006B04E0FA4AFD268AF3FDE8A92333113F6B
+:10CE6000A5BB81CE91BEEADD2C82724E09D37E55E0
+:10CE7000D228D33D01A644B2AF739BF998C76D95F4
+:10CE80003EE3267A2A79D61E9E01ED4B767E3086C9
+:10CE9000E2689677525C5AE829A12F875AC7201F6B
+:10CEA00094283C7E2C5A2E041CDC0FD7B62B7E36E1
+:10CEB000AE4FDAC2DF8F2869B851B59BCE256E74AC
+:10CEC000A8463D3AD70D011DE3FD5D9C9FF9DD02AB
+:10CED000236EAC6D2B9713254D2AD981255BB6B7F0
+:10CEE00063FC70C93B76F27705B79CA1FB10539E9B
+:10CEF000D946FE9460936C397FEB11B7B9458ED853
+:10CF000031EEB0B19CCE1D217F84F20DB1E397CFFD
+:10CF1000175F58FACC9E9D210061E9AF9EF4A07C7A
+:10CF200039D5B2D98370877EBF326EBA479C66C34B
+:10CF30003D5F19A7790AFF018C738F43D835469C52
+:10CF4000EB96BEA447C2FCB2F3629C7374E9E5DBC6
+:10CF50003E7D1CEF11B43D7BFA719C6FD93F3E7E44
+:10CF60001CE3C1D85E27ED77C1A7DEA2386CA3DD34
+:10CF700026B1DFB56F7D92E2D7DBDFB5FBB0B7F648
+:10CF80003DC707633C60FBF62F52D06FB964CF34C6
+:10CF9000F2EB2ED9312595C5D82F8C14E9367C01BA
+:10CFA000F1F3D1F83AD07880E2D63E027CA3FCEBD4
+:10CFB0008ABB6D28E771CC5E116F5B1FFB9E428FB1
+:10CFC000F8DAC6EBAEB91CE57E23D71FCF1B67FB93
+:10CFD00026E0F1DB1780BF7AC32F101B7F1FE13FD4
+:10CFE000004FFBA2F0F769E3C25F3C8A658D7D7B51
+:10CFF0008DB38D5C00DC8C7B100F38FC871CC988DE
+:10D00000E75F525C33E26D8617F79F4F07E3FD91B0
+:10D01000136AE75CBA5FB8C7AE63BC68C99EB789DC
+:10D020007FDA77BC417E6826EE23B4B3AE3F1E3F65
+:10D030002E8975D6B9797CAE803FC6EF7A3DF45D16
+:10D04000C4E9723A36E2777B8BDB959D5CCF36EE96
+:10D050006794D7FD51C4C376E34BCA413C1DF9CA5E
+:10D060007868030EBA90C3DD71E8B1E3A3BBEE2B81
+:10D07000087C21FE701FEA8A3387FCC0B1E4377A4E
+:10D080009BC59007ED1B78FC7ABB1AFB5EB011972D
+:10D09000FE8F683E0D5F583CFAF9E6FF75E1D381DB
+:10D0A000CA4F724F38B5FD2DB61C4F774ADFEC9E44
+:10D0B0006199147D6FCAEB1C87713B4734B483BB05
+:10D0C000EC6CB1DE36E1576F7B4AA678E5550D076B
+:10D0D000488E47CB8B0A7C2F25C67C33C57C2B9A88
+:10D0E000F83ED1F6AC3BEC827EDAF6EF227AAEA8BF
+:10D0F0003F42F1D22F6FF995D66A8A8BC07D226CA0
+:10D100009A7FDBD3FBC690DC16EFB2448F33498C99
+:10D11000136C8E3D4EB0FE8C659CD25083A6BBCE68
+:10D120003FDE29C57F23F677AA85EB83A71AE4E9BA
+:10D13000E118E30F73AAD677A160BFA4F767DCFC00
+:10D14000BD19D91347FAE51277CE3B0949986A14FD
+:10D15000AF55BD4CC477FD872F0DF15DEDBE8AE163
+:10D160007C57227C4D7E1E550F30D44BD5B4BC2C41
+:10D17000F42B44CB1B2DC9C6C226FC2F714F4FF593
+:10D18000D279476420E2F370C67115FBFD4B949F82
+:10D19000EA2F0A5B950AF3FB4B48F22D837ED9DF19
+:10D1A0003E1894E7EED97F971EF163D9E257AAB0F3
+:10D1B000771E46BB84BDE0A4F80679AF93DEF9087C
+:10D1C0003EEEA4F51ED8F1F913A45FFFC2CEF8B964
+:10D1D0000F582F20AF0A75DEC7F11D9F3FFE57D4B1
+:10D1E0009FB1318C5FF838D447BBA13E9EEC9C8E3A
+:10D1F0006713C6A05FA4F085BB66A23C2B8CE7F446
+:10D2000058F84C6AB81AFA3B96CCF3C7B60DA27719
+:10D21000254A9F7553DCE8811DCF55E0BED4FE4CF6
+:10D220003CC37DA9FD05A1E7FF52BC5355AB7ACDA8
+:10D23000F1E3C54CF19AEFF39462DE12AFC4C82F4C
+:10D24000417C84FEAAA604BA0704FAAFA59F8FD436
+:10D25000CE3B7C44C7A1FEFCFE53A43FCA83E87AC0
+:10D2600046F9BDCE21E25E39B47375D70F6A9D05CC
+:10D270003C5FD39FCB9316AAFFB053F88F4579CF6D
+:10D280007E79FD8784FCEEEE87B7AF10EFD044D3F4
+:10D29000EF46D16FE996BF5F1CEB9D9518F3A7EFA2
+:10D2A0003F9458C8867ACA7627BD7F85EF28E07DEF
+:10D2B000859D1A3FD72AF344E89D9BDD421E97C502
+:10D2C00045E8DD9DFE621E581FF3CCD1FA34BD9FA8
+:10D2D000F69C93615C59F90B6E3FE2BB7CE7E7C7B4
+:10D2E0007E9E857189F114175FFEC2FF223A28B72E
+:10D2F00047E6223F746EB7B38DC8E7DB5F1D8CFC39
+:10D30000DAA64606F7F98AF3BAF206BBF5FEBF586D
+:10D31000C7A9AADACBF0BEBB71AFB6A41739F357D1
+:10D3200027D7A35F71FA5F7212BF5BDF733A55357F
+:10D330003B13DF5930EA973862CBC577515E7C13D7
+:10D3400039EEEA713FF55D9CCF47AC2505FD3E15F2
+:10D35000A077A33C2FD9923E10FD04FB9DC63B0451
+:10D36000DE04DC8FF6AB5EB2A73135EF3327AA7C43
+:10D3700099CA30F4DF8CCC54601D1D1BCE14F467A9
+:10D380001847EA9C1D4BEE9D76C6D33A4A1CF69888
+:10D39000F79DCF09BA7A0F8DFE643E1EF28731EEFB
+:10D3A0007E354C72F88E382FD52B01BB08BF976E97
+:10D3B000999369797F45A9A17AC0A704CF62B64E37
+:10D3C000CB32C96F63BCE2A559994A267E57FE4FFE
+:10D3D00017BDCADD7866A124D20B150163B6AE9FD6
+:10D3E000E57E88A2E639107E1ACBD3151949A586A9
+:10D3F000F83D8E3550EA02758BBF5356C9504E9E8C
+:10D4000010E7F6E8EFC2B41B5E7792DC0F0D626C9A
+:10D41000783ABE07E14DD04DF053F1101EE6635748
+:10D420002A1997173374B493A550807D09F4545D7D
+:10D43000353D13E911FEFC180749A607CCCFA3BF61
+:10D44000FC05EA4140A7FC3DBFEFB270358018C330
+:10D4500081C9AF3A99F177E856BFC3CCF6C6A5713A
+:10D460009278E7681FC93117EBFEEB843C8A55942C
+:10D47000B7D509FFC8C1734497CE22A817C6BB58B9
+:10D48000241E52D728E59499FF3D599037D1A93EE3
+:10D49000D15A1ECD1720D7A2C66D20F841BF9F4498
+:10D4A000F5FB4954BF9F7C55BF069C828E8D3E7C08
+:10D4B000A76265559E801B1FCF21E006F01989EFFA
+:10D4C000E8315B9C4F9C87135CE3C46CEC581FF005
+:10D4D0005A1E974E78B92F616F27C641B3A45A865A
+:10D4E00076EF0A89EFD3F097E732B563BA83F8F0A5
+:10D4F0001E314EB980F30AC33FD5A3BE93F4AF1ECD
+:10D50000F59DBDD58F8B5DDFDDDB7CE263CF27B181
+:10D5100097FE6BE263F6FF75E552C50B6FBF86E7BA
+:10D52000B65DF24907D05BF5CCF238D433138FFDEA
+:10D53000A395BE703DD331D08AEF38A46FA0B7B8A1
+:10D5400061D6EFD174D21B7DE58B7540DED50FE03F
+:10D550007093187F6A1D3FF7BE6509F7D38179E89C
+:10D56000C7FA378BFA37390AC9DF70C4C6DFBFBACA
+:10D57000A596EB91B7FC58A6F3E91EEF51E13F8069
+:10D58000DF6E5D2A8523E9B1DED76275783F6E9E36
+:10D59000183FFABDAA00F3E6AE9663BD57C5E9D2BF
+:10D5A000B85717FD4EC5029627DE21B37E3FEBD458
+:10D5B000BBE467CDA8EE7D2CB416E81EF54FA07B2A
+:10D5C0003C97C7EB621417E2D1785C48CB203A4F06
+:10D5D00033E4DFD991DE04DCAF997F30FFAEF3EFA7
+:10D5E0008BAFF4A69AEF1D2AE7E22CEFF554ABBE01
+:10D5F00034946FEA39D05FC154D6CE0D615E533991
+:10D60000E8ADC4FC18BE49722A4D09A35C54F43C31
+:10D6100056887AAF78EFC3A8AF255DD5A567BE0E53
+:10D62000FF6F8E4B26BE5CBCD64BF7B63F8BCFDB75
+:10D6300089F4247B727C01574F7A08EDE0EBAEC68B
+:10D6400075A7F75C4FB5E6F391BE7D158080FC6F42
+:10D650003E07CE4FB67BDFF6E2FC7EA332F4BBF48E
+:10D66000848FEF4418CACF8607507C889C306304AF
+:10D670008EBF46BC6FBABA6A24A52BAA984879BC5B
+:10D68000DC8A2AAF487344EA17E974AA776F551AFF
+:10D69000E55755F92835E0EBF0D5D0FB938E617C4A
+:10D6A0007C872EF0976413F00B90FEE548ABA473D3
+:10D6B00045A75E19C177DFD840D87770597A0DC178
+:10D6C00057D319F935A13EE5ED988754AD9D41F842
+:10D6D00052F44A5608E56FC5078E225C9DDE4B2D3D
+:10D6E000EF5ADAD3C646BD7F1A056F83DEB671B82E
+:10D6F000DF2F717A8B86FBFD6A8B17E322EEBFB2B8
+:10D70000EB5D29823B98431CEEBFE6E7B43DE1DECA
+:10D71000327BBE09EEEEECE904F7FB049CEF1670D9
+:10D72000AD1678A816F0AC46B8537EA4C8FB443AB0
+:10D730009DD27BC4FBB72B111F90CA087780877DD1
+:10D740005488C9301EBA79F1CFEE1274ABDBC81F12
+:10D750002ABBF2FC08777B1287BBC3057820BA0688
+:10D76000B87BB13C44F0545D1CCE509FE341E415BE
+:10D77000847B267EE7F800B8F78D1F87F27082055C
+:10D78000CE5AD2E40B83FB237C7F4B127C1E0DBF51
+:10D79000248DBFAF6BF0776FFA71B588B7AE16EF17
+:10D7A00027221C51AF7908E0C3340E4FFE7DA4C878
+:10D7B000FB284D16F67F35E001CB1F16FA10C21973
+:10D7C000D31FC573FB3CC956B94F4538F5E1EFF29D
+:10D7D000B0A4101B98CD78682FFEA5859817F3C6C6
+:10D7E000F9AFD74A3FB2AE44BD03E97D18E96DDD1C
+:10D7F000ABAA0DCF3FE4A55759EE67CBB3FD895EC9
+:10D80000827F4042BDE63EC1876B915E687EDC1E32
+:10D810005E29E8E06EF1FEEE3D827EEE17FCFCA094
+:10D8200041373E7E3F64CD741EC798946113EF204C
+:10D830004698394E30D1D7C0349817D9365E4AE968
+:10D840009D4BF68E9DF8367E14F3237D25BE7367BF
+:10D8500098BF439BD70FF5A144E3DDD989DEC439D6
+:10D8600074313DA288F720656E4FB6C47CDFB5DA0F
+:10D87000B7DF817E99DEE613EFF3A7AF84F1E26BA9
+:10D88000DD6447F50DE4CD590879572DD8550CCBFB
+:10D89000B97C70C1BC0B4DF411DF8B5F47755D59CE
+:10D8A00080F44AF638A43FA91DEA44F802ACBDE86A
+:10D8B000BF7A48CDEB87FBC14389B1FD70B3E2B9B4
+:10D8C000BFC49375A9C59FB04EF5533B7DA255DEED
+:10D8D000AC13FB439FA956FE30F683CB447F9FC514
+:10D8E000077E140F7496726E2AC9CFA46B63EF0F74
+:10D8F000D5AA16C2F739AA4773BE0EE56B5C6FEE68
+:10D900002177189D839C0D8CD888FE2F83BE96337B
+:10D910002EE7428CEB93C6BA7E86F43E02F7019D59
+:10D92000E81EF701CCCBC334A29B945B6CE47F5818
+:10D9300025F8EC5EC15F6B045F3D807C3502DF81C2
+:10D94000F651FA13C14FEB90FF20DD129FCEF57810
+:10D95000F1BE9761C72C778CA5F71CAB5D36DA0F4B
+:10D960009477ED6117DA05FBC6EBE8F791DD597A9C
+:10D97000C08DE5590E3FC0434ACCD2915E3E732F15
+:10D98000B8E8ABE25B01FDF4AEB0A2727FA49E9456
+:10D99000C7DE1F45A753F49E80AA5FCBD03FFD7022
+:10D9A00052A513E1FC703C8FD3AACDCF26B8033E1D
+:10D9B000B6C59BE2A552675FD5F51E1F76FF702F97
+:10D9C000EF12EC12F2820D0CB16126F9502BDE7BC6
+:10D9D00064DE101B699213CB87E732F4EBF5940FEA
+:10D9E000BDC8CBCD5C5EAE9062CB4B437F37E46568
+:10D9F000B45C31D295174DB7DCA7545D3E46F26654
+:10DA0000646CFFC1EFE3EDFC1D6AE6F3E5A7F72CBC
+:10DA10000778FDDE0C2FD4830C7FC5F762AC275A44
+:10DA20003E9EB8CAD85703F43ED002CDFBF0F8AF03
+:10DA3000DC57ADFB41E1B9D5A40F149CCBA1B4A830
+:10DA4000763AF111C3D318939D7C7CFD0F3D88DF9E
+:10DA5000E3B5E27C7CBD1AC6B8A47D1BEF7A600EEC
+:10DA6000C075C1E3329D8FE33D0DD914DFC2B2BC56
+:10DA7000A4A71BEF231E0FDFEE31C73114FCD4E93E
+:10DA800047FDBF377A2C581FDB7F538DFF44BB8384
+:10DA9000F946A25D01FA5D6704F5BF9F38E9DD181C
+:10DAA000231FDA18EF33C78F18E95BF1D3CE21DCDF
+:10DAB000DF8AF73317D29DAB0F9DD7F4CE177CDCEE
+:10DAC00063E833C773D247459C35C07D96C57FCA8E
+:10DAD000CF498F097F1873F4521E27CABDBD947BAE
+:10DAE000783C13D36397FFD37EA4513DECB421B8A7
+:10DAF000FEF2DAD3ABDEA52FD6F3806211C7BD608C
+:10DB0000637C78790CBE5920EE072F10E75D067D07
+:10DB1000157FDFD0B3395D46D3ADF4D42544A71FBC
+:10DB20001F54C95F5B01F4877A98F4D4787A8F69BF
+:10DB3000D913973D780BC0F993433295979D731095
+:10DB40005DB6FF878FE2FC3B7FABD2EF267C727025
+:10DB50001AC5EBB78BF79EBBF8CEC5EDDA1B5C5C44
+:10DB6000AE149CBB97E8BB8BAEC2F335E4DB82738B
+:10DB70000F905E5680EFBD4EC0758F78799222E887
+:10DB80007702B61F92BB1CEA15B6723E61134315AD
+:10DB9000E48FDE10EFBB37063FDFE0F25AE2450BC1
+:10DBA0005BD750FF0CF4C324535CC802F1FB07851C
+:10DBB00078B884E57A88A521DF08F9D64DFFD677B5
+:10DBC000B0DB9DD6751AE9C2AE754EB0D861DDEBFB
+:10DBD000FC2EE773A16F14B6E6F07975ADE7E7E3C5
+:10DBE00063ADA77B1D13A97D7B62ECF1EF17E31FEB
+:10DBF000AB2AC29B5BAC44BCB75B10BE5DC3F7D520
+:10DC00000AD627F6914CEB2AAC2DB5C42B15D4E6D9
+:10DC1000D3FB7A85EBF3B5DB4CFB53175E42FE97E3
+:10DC2000270DEBC6CBFD6B2E23BCA8AEBC3B917E73
+:10DC30008F3D557CC77B5EEC97E3E984161A534908
+:10DC4000F2EA764FACFB4DF747E3A956E009EC80CA
+:10DC50002C139E0CFC44B73FB6B9FC8EF7F01CE2C7
+:10DC600011FE9A50EFF22B0A7FE9B1E1F7A4A0D799
+:10DC700063A00F042E087EDFB2C4CBF50A3F816F8C
+:10DC8000033EC677D0E7C208B727913793B13F4E1E
+:10DC90000FE7835BF7F8821E26C55ECF6B5DEB59FD
+:10DCA000CA42A0C79CD4B83ED1FB7AEE6221C70518
+:10DCB000ACA78B4FF32D7CFADA9A5B389F0AFC9F56
+:10DCC000DC7F0FD1F5B170BC0FE3547A5BCF6B48AA
+:10DCD00007E362D0C1B0101B95FD7F8F0E4E68FE2A
+:10DCE000118FE03E02FB15EED3C54FDE3FC63CBFB1
+:10DCF000B7E227FD9EF6A59A0B3BA70E4DF61DF445
+:10DD0000D27E27FBAA6149435D813F63FB12CFA30B
+:10DD10009FA19F6E45E2CFC6C4D28B5756052EC732
+:10DD2000F38BEAAAA2CBD18FAA0A3D97A19E9BCEE4
+:10DD30007F1723D67B7DCCCDF1BBB2AA92CE3F9884
+:10DD400023C4F494EE7700D8894CF2472B2EAB7E97
+:10DD5000A6A9011DFDDF9A78A7405502ABD3B3D029
+:10DD60005F94941132C1EF1F2E7EEEB2266DBF8EEE
+:10DD7000E71A76E81FFD608E81CA598BFFEC456576
+:10DD8000415FC093F11C731C6BF04B12F913CF462B
+:10DD9000F913CF5AE69104F3FE0A3B5B7178E81C55
+:10DDA0005261C28F2CE0015F681FBB5BE7EB5C1E1A
+:10DDB000EF217D60D54536B2EBD609FFF4CFD02FE9
+:10DDC0004D7051E8BC01C3E0B0BE96C0D7E1C4734A
+:10DDD0000C19EDAD08E5DDF862974C4F1F4A984FDE
+:10DDE000645E09F37D596415DA0F1D935AEF203FE5
+:10DDF000A03390E606BC7ED6AFE5B084E712798109
+:10DE00008B11CEB57228C30BF57F21776660BDC13B
+:10DE100050F44E1F9E5E84F71202A6F3CE21B48EFC
+:10DE2000EEBCDC337FD15225EAFCEF6F179BCB5F52
+:10DE300071FA2FC679543BF9FB60491F4874BE57ED
+:10DE4000DD75EE9447FBF26437C723D105D2D54187
+:10DE5000AE379D55BC097DC89F3D32F345CB3C7C18
+:10DE600096BC22ECD13AA0533CA732E86398E2B7C3
+:10DE7000211D0DAF81EF663CC6D077FBB8E879F085
+:10DE800098FAB9313F1897E8553E97CBF7E3287ACF
+:10DE9000D82DF1F9878AEDDC6E642119F13AC7209B
+:10DEA0003C6505CF2732E38FECB5778D7327B682BB
+:10DEB000E7759E0BDEC6CFB9A3E733A7F9EE163C94
+:10DEC000EF99D3DC6F3E9E7BCE29BAF8434C77ABFB
+:10DED0009DFBE3515EFC50227DF6A6B75E54E32124
+:10DEE000DDF1E6467A9F60AE9BEFBF7359A78AF8D3
+:10DEF0000F305DE3E756615ADF6DCC27F20D2AFA49
+:10DF00001D6E89846FB81A72B7BE18BE1AD5BDB916
+:10DF1000073B5F42B4051AF45C3A1B32DA35F95E0E
+:10DF2000E679DEAE0B0E4EF1FB478A83D6D5BD6E89
+:10DF300007C1C15827D4247C74C149BCCF66C0A591
+:10DF40006BDDF1375F85FEF8DEE4DC1CC7E80F7996
+:10DF50009C3C9F57349C3EC12290930BDDFE1FB921
+:10DF6000A1FC7AB7FF2E4CCB1C9D839521C437555D
+:10DF700098AF900317A5001C3E1A14B83819E1D1C8
+:10DF8000D2F782F4FEC34E2E0F0EA71B7A6DAB1B89
+:10DF9000E99BBDC8F55AE3F73256ED387EFF8D0098
+:10DFA0009F8F5EE5EFCD95CBDE6BEE22FFB2CC62AC
+:10DFB000D921467A58F80D1E76DBC47BD17C9DF3BF
+:10DFC000140EEF798DF174CF6EDE52D9F2BEFDBC26
+:10DFD000A53C7E95292D63AEB7D8092B045DF7ECDF
+:10DFE00007FD1AD1FDCC5F3A99DE2DD9A9E993C876
+:10DFF000CFF138A7B3F953FD32C6FD4F582D911F0D
+:10E0000069FC516F532BE4E787137DC8AEF3EF5CD7
+:10E010009C89EF9754B4703F67AABC28E33F207DEA
+:10E02000683FDFEF31BF08E1E4F27B5DA6F39A368B
+:10E03000B53243477ABED5E54779907FBDFF5DC4D1
+:10E04000A7E1E730F6DDE7400FC038CEFC5BBC3916
+:10E05000481FF90D4E3FA50EA6C4815CCB5798030F
+:10E06000D3548D294E4CE39803D3ECE5427FAA9D0F
+:10E0700045FA8327274FC3F7C4F39B9FFC14DB1794
+:10E080002A917D92899EF29B5FFD82EEC3F9F3286F
+:10E090004EF75B5B348BDD39BAC19AFF7693359FBF
+:10E0A00011B1E6330F5AF303706D267D73FF1E1E08
+:10E0B0009F527A9ADFEF7D1E60A0223CB6D9493E7E
+:10E0C0004E296DCEC67887D34FBB6D58BEFBEFDCB3
+:10E0D000EEEEDCEAA47725F7BD17C7E292F01D6AE1
+:10E0E000E7462C3F1DD7908DFE45A84F714BB0BB26
+:10E0F0008E40BB71E7A506BD8629BE69E73FF8FDE6
+:10E1000094CEADF630C6519CDEF5E4D3489FA7B758
+:10E110000E207DEC792964C37E43F770FC4F88F3B1
+:10E1200058E454E916AB3D7E42E8011D27B579E875
+:10E1300017BAB8D6BAEE4BC2D67CA7A87F1B337DE0
+:10E140004FC7F810EFAA34DC6737C57EBFFD73C137
+:10E15000174F3DA519742B8BF71E9937A5FBBEE20F
+:10E16000EEEE73DB2503808E4A111643BABF974645
+:10E170008DDB850FD17F92382FEBFCAD4CF03955FC
+:10E18000556489EFE8D2FBAA7C69534DFB5141ED00
+:10E19000BE947CD257F7A5DC66DA67CAB61E48B9CA
+:10E1A00019FA6BDBA2D0EFEB95CD79E2810949F842
+:10E1B0005D6EC0F96239FAE7DA1A5EF2603DD08B23
+:10E1C000C79AE3BD0A6BC7A54D35F1E9D7A54B83C7
+:10E1D0009FCA740E9FE7725A72F11E46692DFF1D89
+:10E1E000BED2861BAEBB1AE1BE9EDF4FCF56589EF5
+:10E1F0000CFC53B6FD86EF8F86EFC1C7C6F9703EA3
+:10E20000D9F8242DDEBBAD3F43F776EEB571FF4460
+:10E21000345C467B387EEFFD81AB08E512F4F7A253
+:10E220006D2CB53F68037DE4C4E4D06B374395D3D0
+:10E23000ACE10F57535C96959E803E25D4B73A3794
+:10E240004BBE8DF47579F6B5A85AFB97513C3A94BC
+:10E25000C7B4378AC3D67EA2F17CA547327EF76861
+:10E26000A4995EA2EBF59D11A2DFB72A5B0A72CDDD
+:10E27000A4EF971DADA178D8E871C819688A3BC191
+:10E28000FDD14B7CEC147A02931CD9225E7C28CF02
+:10E29000D3BBA748974010A597B2A95E84EBB56C95
+:10E2A0003AA6CF4B91076499CB03F2336D8B277954
+:10E2B000D0A6B73EF173A4A3FAD1741ED65FDCEFEB
+:10E2C0006EF346E8BD58E37771DA749E2F69765293
+:10E2D0003CD5E98F349297CB308E13EB3FEDB4D918
+:10E2E000405F3BBDBDEF648C0B6E6BE0EF8A9F6AB5
+:10E2F000E83B59FB8AFD379AEF8D7DF108FE13DF6D
+:10E300004FF5F88B3DB8DFACE071D3A97D2B332AF4
+:10E3100063E0C96897A45566A0BDD279ABCBB7912D
+:10E32000EB53E90AF9DDD3C8AF922FFC49F7E9793D
+:10E330007778A0BE1BEAFAE1FF3E07E58DE877FC9F
+:10E3400040F6DDA10FED3E1F5F9015A0FBE3F40347
+:10E350003630FE7C854514A0B7F9B8AF8CA13CC916
+:10E36000CFF9EB258A235CB0C6BA1E7CE7DABC1F66
+:10E3700016E12F290EC5B8B0064A8BD65BCB8B7140
+:10E38000FFF050BC17C5CB94D459CB198B901FAD5F
+:10E39000ACFE4B7B2CB87DCA8CF5F96B3C16B9A34F
+:10E3A00092DCF950CEA3F595A23700D29BC4FE1C97
+:10E3B000BC33276D01A41D4B27A42DC8C47BEE7C64
+:10E3C0001F23D38EF898BF8F573A954506F1777182
+:10E3D00018EE8FA5CD526434E61D2CE419CBBFE3B3
+:10E3E000FB20B86EF33D3163DDB85EF377F626C7E8
+:10E3F000AB71CF10D76B2E2F137028ABB75BFC3AE5
+:10E4000013EAA590FBDB787FA995DA55347E69B7CE
+:10E41000F42BF65FD8B79913F035A168838C8B790C
+:10E42000A84B8E872F89750FE5B080DF433714F432
+:10E43000437E7D10F5CFFE02C039249F849F804526
+:10E440001C305E5C66579ECAB397F3FC3E4FE08A71
+:10E45000DA8160AFA9013A879A2FE7BD8CF71B4795
+:10E4600026065E42BCCCB7F9072BC4B7FE11E417F1
+:10E470005DCAE1F0F0D8CA4B2A63D9C502BF3F9309
+:10E480001AE85C3EB48BEFA3EEAC4ED5ECF7FE8BF6
+:10E49000904709FB5BE95E4FE70E89EE133F221DB3
+:10E4A000A1FBB68F5CE96568C7A7019E50EE3E22CE
+:10E4B000B115F85E5E56E3AC452F219EB3E27C7841
+:10E4C000DE5FDE38492E77D1FAB9BE155FB901CFCC
+:10E4D0008352E78D1C8B740EEB9E772D7CFFD0E36F
+:10E4E000A5F1FAB938DED39687D2178FC2F1F316A9
+:10E4F000BD847C383A8EEEA1A702ACDC7D285D8D10
+:10E500007A541ACBD887FA60DA0CEF58F4B93FE4A2
+:10E51000E1E324DBE479B350CF1BCBF37D7E2CF910
+:10E52000371211AEA57152ED6C3ACE17BFA35EE85B
+:10E53000403F82CB84EF299519387EEA509E2669A8
+:10E54000118A0F3C64E0BD99C7E92DD119C9E925AD
+:10E550005F4C4A453BEE501B18D420BF0E0D34ECE7
+:10E56000CC888BF4F06123797D61F72DC9E0F75FEA
+:10E5700092061BFA0FAFD7A1FA133251AEBEC1F506
+:10E58000F14F5C7EF2575FA6C58EBF4F48E0780A18
+:10E590009E8B636193FF3838FB33D21383E73C2CA7
+:10E5A0006CDA27F0BD4D731C7759D17EFA1D847249
+:10E5B000D642F701CA1BAC71E797C5C51ED7A0F3B9
+:10E5C000E0391B0BF525321E88F6D721A973D5C279
+:10E5D00024BA174BE73BC1731A0B99C60F9EEB6326
+:10E5E000CD77CD3385FAE9AEC7ACF59A3EA77A2C44
+:10E5F000A7D583E3B4EBADB48F04CF29D4CED86FC5
+:10E600003AC2B6900AFCDCEEE5E51DE23CCFA86F0D
+:10E61000F4D73E5B13F7DEF8BBE86D552078002E8B
+:10E620008F369F217F7459F33E828B410FDDF08935
+:10E630006721137C52AA5B2236E0ED690F6EB87B2E
+:10E6400014D890C9FB051F8736DDED9F08E5F8BBA0
+:10E650000F26BE8ECFEAE27312330FD9642E174213
+:10E6600075774F9D68CA8BFA5DED439BAF980A346E
+:10E6700095358AB7BFE6C1275E594E4E8B1A11DF1A
+:10E68000DF3938CF6DCA3BA2F22EC88F36E5F5A828
+:10E69000F2A4A8F2B4A8FC405EBFCD1D192CFB402B
+:10E6A000DE3FF8D415F8FB9E6DFD2273F1058F3522
+:10E6B000F2B62BF0F77CCBB3F8EFD356344B3EC910
+:10E6C000243F2BBACEF35BB5F9A3100E2D2FA31C5C
+:10E6D000286B9274D4EB5D0DDB2394C7765E53BB3D
+:10E6E000066E3F96351CA176BDF63FD2467C7CEF88
+:10E6F000C8F7A9DEF9CE9FD80CEBEF5BF5761E7557
+:10E70000440A2C4E48EE7E7FBD6DFBDBDDBF2F0A39
+:10E71000DFDBFBF90F901C8DBA071EC4F9B8BAF9FC
+:10E72000C480E3BD23CFD27BB47F1CDDFC16AA03DB
+:10E73000F14BCE2C53A0DD9FCB8F8F437D0BDFB4ED
+:10E74000C57DE36752F812DC8F1E65814B70DC5B80
+:10E75000CB87EFC39F4C38ACB63E86EF956F78F011
+:10E76000E52B1498DF6177EB20FC09B74D096FF0BA
+:10E770007C722B7F5145FF1DE1E7F0A0D64136C8E2
+:10E780003F99C0A6537E78EB63987F3DE104AF3F8D
+:10E79000BA7590ACA30972F28AA990DFACC7E6F70C
+:10E7A000DA04AE371BF39B36DCFF53840B2BE3FB01
+:10E7B0000D5E3376803C9D5B726ADB6680C7DC1F32
+:10E7C000C5939CDBDC76DD55790487501EC611A607
+:10E7D0000A78D37E48725D217DA21FEE817DBAF159
+:10E7E000E91EDCE2A5FDE2D2CAEDA837A4CE1D45A4
+:10E7F000FB45A1C72FE9C9DD69381952A82FE93AAD
+:10E8000097EBB28DE22352EF72931EF5A0F83D0311
+:10E81000E03BA20F97C0CB36B19E6D09DCBFF680FE
+:10E82000671AF5F39EE47FC42163CA424EF2A7C57E
+:10E8300091BE72F306902B20D7D78979AF5B7B0905
+:10E84000F9296E463FF128FCEEEFD76754B7FEBFBB
+:10E850002E03F2AE6EBB6EDD2C7F3FF3B9F6BA0D20
+:10E86000BCDC905BEBD2797B63BF4AADE6E3A43EB0
+:10E8700078C9465C47BCC2287E7BE1EC111B97D16E
+:10E88000FE7F2DAD9FF9FDFDD00E3F5A3CC4867A28
+:10E89000A9819FC2E1FE5712603D3789DFEF35F055
+:10E8A000648C4FB7E2517F90417F403B353140EB64
+:10E8B000077D620C0F6EE0FA04D21633C19729ADC2
+:10E8C000E3F0FBFF2038B5FD2BE0F44F9F7747C9FD
+:10E8D0002190370CFB2F5F7ADC72FFED3F01D123D3
+:10E8E0002A700080000000001F8B0800000000005C
+:10E8F00000FFC57D0B7854D5B5F03E73CEBC929920
+:10E9000064264C9249C8E38440081071124344F0D5
+:10E9100031848851693B50D4D87A71203C022699C1
+:10E92000A8D5624BFF0C12790918342250C181021C
+:10E93000C55BF506458C1A70448A7AAFF68EADB782
+:10E94000576C7FFF08888F4A32A2F5D297FDD75ABD
+:10E950007BEF64CE24A9B4B6BDF93EDCEEB3CFD9CB
+:10E960007BEDB5D76BAFB5F61EA6F54C0A5CC0D8EB
+:10E9700066256ACEAE642C7C48F1ED61F007CF6766
+:10E980003B19FBF7B4A0D595C9D89FF1EF0AC6E6AD
+:10E990007EBF29275806ED8D2318CB612CF5BBCF00
+:10E9A000D4DE00D5B94B3F7A7C0F7C3FF77BA98C36
+:10E9B000E903EF438F8CC1F7EFBC6D5BCF2E84D2A0
+:10E9C000D2193579A0BC86F956C07BEF98584327F9
+:10E9D000F4F70EBE7A096355DFBBE5353691B1DB3E
+:10E9E0005D2A6393185BABF873988A250BDBE0BB59
+:10E9F000F02C4B644F11637D1153D80CFD75B82377
+:10EA00005B17C1B81DD795F9C2D05F1F637E86EF33
+:10EA10002D4BA5F73ADC3D4CC3F64B741740C20EA4
+:10EA20007EA1FA19D4E3375A22BB14785ECEC2769F
+:10EA30006C5F323E1286FAF3300E7D7F634A640FBC
+:10EA4000B6CF828FA0DE71A3371286FEEC2C624710
+:10EA5000783A76FA73321C8CE5AAAC05E1EF28828D
+:10EA60003A94592BD9CD0107E2CF3F719673000F2D
+:10EA70005F7799683EA9953D4FFF37F4C7D6DB7D98
+:10EA800063A0B0E1AB586FCF2678993B5885F86604
+:10EA90001AFC03B8EA1FC889ACC3E7CC5785EBB1B1
+:10EAA000DAE99F47F0FF205547F81FB6B335B60A9D
+:10EAB0002815D666CB00FC0B7858FB43000C633757
+:10EAC000E3008097FFD770D6A9C3F32B5D0AAD078B
+:10EAD000FCF96D558CCD67BC7DFEF2D477958958D5
+:10EAE000AA516B1A3C5B73A5BFC746EFB13F8FE2DB
+:10EAF000A50DFA0B32F1B725EE44BA09E27769D8D1
+:10EB0000FFEF9DBA03EBF0FD445C76F8BE74E0FBCA
+:10EB10003A17A3F9CF5539FCAC355547FC4AFCC828
+:10EB2000B24EC2D7FE903F713C394E72BFF7BAFC6D
+:10EB30003722BE00EFD1740FE245A5754D86D7632D
+:10EB4000896FB043FBDC56D57D37E033B8CC49F351
+:10EB500095F0DE9C1DBF8C150FEEFF746A739586D1
+:10EB6000F35FC6E99D2DB702E212F16219A8035DB9
+:10EB70002C64F163266588E75AF445847F5147C2C7
+:10EB8000F7F4DF2FAC89EF497E61BA9204BFA02B66
+:10EB90005DD170DD820A5F378B253E375036186EA7
+:10EBA00089CFD582EE245D24E37B35E27BD2607C85
+:10EBB0007B2C3DF9D86F709995F094DC3F6311FA86
+:10EBC000EE213BF00FD0DD1645217ADD72576A64E5
+:10EBD00025F2A73DBE17F1193A7C15AD77EF9214D7
+:10EBE0009DC12BDB2C30419433879D9C8F4B7A4AFF
+:10EBF000909F7A61CE7E589FDED7D59D614502C138
+:10EC000058F3EBEA2EA4FFDE67AFE6FDAC48D5195A
+:10EC1000D4438861183714FE432B03BC9E34C52CA3
+:10EC2000345E17E057C209FF7AE15F43C580BCE854
+:10EC3000C3061CBF8BCB0798E1121AE7DB296C1DBA
+:10EC40008CDB6C52FC26686F5E3A3EB292C3614325
+:10EC50003E6A1420359B589B5231C0F7CDA6132530
+:10EC6000B795F1360DDEBB85F17581F78E2A005F11
+:10EC7000A36D7D4C45BA45FA87F6A5D85E3480FF72
+:10EC8000E6F5BFF913C2DF7CC048178D8F19E7B1D5
+:10EC900034919E8A06E824B592E389D5B0C81880DD
+:10ECA000D729EAA9B5B1888A785A56CD4E02E966C5
+:10ECB0001EE99981F4E3ACEC64F3A10C7DC0FC1176
+:10ECC000807B4AF7CE9746C2FBEEDA583E4E37B409
+:10ECD000ECB68B4E5D34B0BE12CE4BBA37A9CC41E8
+:10ECE000E3D177008A7FBF83DE1B37FB82C4F26EDD
+:10ECF000FA2ED3A412BDF6E023E41BCD9FA3C038A7
+:10ED00009B978C32E17AA6827C43B9BCB07DECAE95
+:10ED10001584677F09CAB707D380CE099FBE2A949E
+:10ED20002FA5EEEA5FBBA0BFA7DCD5FF8D258E1314
+:10ED300070E2F44790BE48A6E764BD23DFCB2E6E99
+:10ED4000296F710CFF1EF017E12DBE359DCB0F4DC5
+:10ED5000A1FAA2FF30EF5C47F0694437B76D2F226C
+:10ED600079DCC0DA89DE1A59C482F4BBC8C6C2692C
+:10ED700040178BE0B57428176FB1323D61FD9644A2
+:10ED80008CF546210F6E6131FAFE967D49ED352CEA
+:10ED9000EA84F6261B8BA662D9696C6F667141EF17
+:10EDA0007FB6263E671D7CBE378B7577D744D4204F
+:10EDB000CC7BAB1D745706BED04EEB3365F94E5A73
+:10EDC000CFF40A7FD13DA84F5E35FB7601DDBE272B
+:10EDD000D64BE2E75E57F5BB88F714D544F38FDFD7
+:10EDE0006325FC9C02BD8DEB7F9F9BDD3C1BCADE37
+:10EDF00056DD3B7A34A2C95530DB3918CFEB9EB3D0
+:10EE00003720DDB8DD26C2B77C7ECC65A67AD5DD9D
+:10EE100002FF2B5223BB8A08DD13919EAA46497D2F
+:10EE2000CA26CE82FABB6656D709F5E6EB1D41EC41
+:10EE3000AF07ED07A817B8B9DE28705B687EB22E61
+:10EE4000E72BE906C6A1FE522EE2A584638C5BC8BF
+:10EE500041B6897F27F4EFE625293B49FFF6D3AF7A
+:10EE60008911FD96052C88D7E7845C794ECA9536C2
+:10EE70002B972B9A6BEE32A83FF741996F1DE095C7
+:10EE80009582DE83EF1B3F4AD1919E5EF9E85FEFEA
+:10EE9000FD19B49FFDC0A25BA17D01D218ACDB734C
+:10EEA0000A9747607F30D48F8DC0F6386EE3C1B1CA
+:10EEB000647F1CB408FB46C8CFC6B4E0D685D04FEB
+:10EEC000E393993EA064F6BC39F2E85E6C3F64F7C8
+:10EED000ED817E1B53385E1B9F1B49DF3F610F4E48
+:10EEE00077C33C73AD919F3C8172E3052BD97B675F
+:10EEF000597411C27FB6D3AEE07B27705EE95042F1
+:10EF00009B82F3EA76923D047C9AB310BE3BB936FD
+:10EF10009BCF4BE0E9E48609C4179BCD7CBCF0B3E2
+:10EF20000ABD7FC21C989103F5134F97FB564053BF
+:10EF30005FC012B5003D87EEE3765EBD49DF8178A4
+:10EF4000628753095EB91EA18D8B67627B68E9F207
+:10EF5000AFA37C1C8ECF51DEB304B9D9CBE205C878
+:10EF60004FDB1A467546519F748FF3915A655E5870
+:10EF70007CA01B177FF79499E3357EC84CF47CBEC8
+:10EF8000FDE37CB52AAE7F709C10C86526F98FE43E
+:10EF900072425D1DAACEC8FE0C3D972DEC3A63FB74
+:10EFA000EBCEE01D6EA0BFE6FBFFE79D6584DF387A
+:10EFB000C945D69E497C79CAEC9F8B74EBAE895AC1
+:10EFC000E627E8F30D82AFEAADC2FE63514B221F84
+:10EFD000CAF6AA6A23DDCB72BDA07F678CCBF7C1CE
+:10EFE000ED26C11FDFB4A21E9BC2416685A8471C47
+:10EFF000D8BF4EFD4FF9206AA9877AE1F2A8659142
+:10F0000028914F00DF511BCCFBD45627E76F4003FC
+:10F01000F6B36832237DB94805FBB5029FEB5D3D31
+:10F02000B02EA79F7673FAFA236005F03D8F89F71B
+:10F03000AC60EF821C7BA64D89E27E60DE16EB2E73
+:10F040007B11F2B55F75E27A6E57488ECD6B9B5699
+:10F05000B215EA4B0F5C40EB9F3699D3E5D2889B03
+:10F06000F4E214211FEBAD110BD9DF3F5118F2016F
+:10F07000F44F7674237C945331180F28D70DF41075
+:10F0800049A8835D34A593CB5506F29C25D84B52F5
+:10F09000DEA31C6749F69F913EC2521F71B9C7F4A7
+:10F0A0006C947B522EDFEB0A74B949AE8DCEC6F557
+:10F0B00085F5E47273BF42786D622DA44FA41EE8FB
+:10F0C0001F57E891D36A98EB2BEB262A5F7717D16D
+:10F0D000784B5927E913A95786A383D7BF840E7E9F
+:10F0E000867400ED8D1FB0E865305EE372166D9A90
+:10F0F000C84BE744D28F5C4FDAB89EC432E53CF48B
+:10F1000065B27E4CD687C97A30DBC2F59D5C6769F3
+:10F11000CF644FE776C094E51195C1FC36A6F93F60
+:10F12000CE9C3460D784DEB2D9F40BB11E60A3E06C
+:10F13000BDC569D36ECA86F690C6FCC857A980972C
+:10F140009DF07CBBB07B6BB339DD7B2D9C7ECD5AB3
+:10F1500080953B705D62B4CF8D673217D2A3C4E750
+:10F1600076277C5781DF71FDD4FFBD8DB5A5247C4A
+:10F170005FFD9C9DE4EAE7CF3A2356B24782856E55
+:10F18000E82FEB5756B2537B9F73923EED15FAD0A2
+:10F1900083F628D1CB2AAE5F715D272135558F6468
+:10F1A00048FBCA352351044AFBACC9CDEDACC1F6CE
+:10F1B00090682F8A5DCFE9CA4AFBCCCFDD3D7762EC
+:10F1C0001DE061689FFF8F58E7D081E9E5DF87E7A1
+:10F1D000A180C3C7B11F2C477AB5AADFB9DE06F4F8
+:10F1E00035435D1EBF0BE6D194EF70A19EAB29FCA9
+:10F1F000F52F6F84FA8707CCCC8AEBBC677A1D1B8E
+:10F2000035BCFC5D12319FE849E0975BF619EB4D88
+:10F210009DC67AA8CB582FC8707A4E4F20D9E1FBF3
+:10F2200033D0B5D5DAF2C14E80D7FABC95F4D1A768
+:10F23000EE607106CA5B53FC18E2D95AF8F144F447
+:10F240006F84BA3F51B0B402EDC4CA38FE91AF3FEB
+:10F25000B7CF2B740D81B701FC319B89F00CD63AE6
+:10F260002F49CE85049F782CFE0F5F84F92F9A9D3D
+:10F27000E2BA9B9EF8674EAA427B926064A12D572A
+:10F280007F88FB2D786F09AEFFE959F01EC0D5B01D
+:10F2900085EBC346164B43BE6D06BBD3064B7C477E
+:10F2A000065F875BDAE25551F8DF8E8CDA7108A7CA
+:10F2B000F6272D80F4B11AFB4DB093AFCDE07AE084
+:10F2C000967D76D729031EDD867AA82BC7752A91ED
+:10F2D000FF84FC61798A96B81F7A57095E8BF86BB8
+:10F2E000B2F558A6C1F857FCE93392F78B97CDA732
+:10F2F0007DC4805D6D25F9B4F8AE203D7F692BDFBC
+:10F30000179EDE6AD711EFA7B7F3FDE3E23C47C4CF
+:10F3100006FF7B859BDBDB8BE13B45198CC764BC1F
+:10F32000BDFFF0555EA4A3F7191F2FDCC9ED8FF7C1
+:10F330005D80AF62FE0EF6F77E17D8EF0AE2F9AAFB
+:10F340000F512E2EDEAEFAD04E60879CE48F59BC52
+:10F35000FDCA710B1DD8DFA723A6A15F68C795E87A
+:10F3600089C2F70211EED7895D01CFB51D17931D34
+:10F370007774BB95C3E9B6EDC5795CF12795F84A7A
+:10F3800033B120DAC71D16FF38E467FDE13D337065
+:10F390005DDE9F956BA2F71F57980BF1E15E968596
+:10F3A000CF172B5A00F9B761CB929989F64E6A862E
+:10F3B0004AEB35AD7079568F83F8E97AD4A34DDBEB
+:10F3C000817F70FCD96FFFF2464F223FDD5EC54C56
+:10F3D00009F6CBC35F237AC2BF28E06BB1C0D75711
+:10F3E000E52B6BAAE48B961294A38BEF6E29710D1B
+:10F3F0006157F4F3C5C39C0FEFCB50B8FF202FC368
+:10F40000B0CF186E5FE62835915EB1F9987F0F9402
+:10F41000D9B02DC6FDF7810C8DDA0F64707B5FFBD0
+:10F42000DD6DFB5E87794DCD086ECF807A21F39735
+:10F43000E3BAEB71573598B18862B2BBD8C3566E48
+:10F44000C76ADC8EDE9CC9F6AE4BD88F77627F9997
+:10F450002417F6623FBDC7FF780CF1DA5CF0F14487
+:10F46000B40F42E73EB3A01FCDD1AD903C77F80278
+:10F470000CE925D43D8B2D281B90C3211FD713C920
+:10F48000F3FA5306DFEF843C71EAE7FD119C7F3B02
+:10F49000DC9C3EB72D4B213FE4364FC48E40FFB578
+:10F4A0007C2AEDA525C2EF67DBFD945F45FA8E2827
+:10F4B000AE3158D7397FF435CC8DA830CE87BB8B91
+:10F4C000C9DFD977609A4F8536C7EE1FAD198578A9
+:10F4D000EA32FBF07D87AF270DE7F7E1EE9369385D
+:10F4E000BF86DD2ACDBB21F249D6C2B201B9F033C5
+:10F4F00025F83ACA01E6521C38BE940F1FEEFE34BE
+:10F500006B8183FB0B487F560E8D97A7DCD37E8ED5
+:10F51000DF5F71395F978F1EB74650EE7D6407FD40
+:10F5200096206F3F72727D772A43EEEF3A0B50DFE1
+:10F53000F4D76F2A35A19CF88E8BCFDF63E92C407E
+:10F540007EFC8D62EC67E91A138B806C5FB206500B
+:10F5500003F2E8A3479F294079FFE19E670AE62767
+:10F56000C097FC9D2C7BE578C26F26FDA81E4B340E
+:10F570000FC79BEFB3727FE5307E54F93EDBC2FDCF
+:10F58000A17D3EAB8E7428BFEB6B48F1A37DDBC73A
+:10F590006C24FFE6770BBFACDF3FDA83FB18F97D05
+:10F5A00052FF151E4E4F4A9742FE83D4B238C9E32C
+:10F5B000BF59DE7B603D13E43DACF3BF215F34D91E
+:10F5C000E2C74632A20F0BE2CDD2ECD0503F65AD80
+:10F5D000E4F415BFC344FB2A4BAED781F2EC8A9208
+:10F5E00094361330A227256D22C601F2734BE9FD34
+:10F5F0007035A7FB7016237F5B0E6B51485EBBB85E
+:10F60000DF3E6F3273AD83EAAC11DC9EF132DF1660
+:10F61000B598D65D41FF90C487D40B483F281F3F63
+:10F62000526C443F4AB74276A76AEA9C8BFD0E476C
+:10F630004F1347C8FD3FA7A7FEFA3F899E268F18A4
+:10F640008E9E823AD193D736343D093FF179BFCFB0
+:10F65000C201DCBF660B7CDD27E44EFC0E9BF49BF5
+:10F660002B38DF99A2BF9936475445FDE1337F9C83
+:10F67000E8FF7D18EC5FDC27E5A0FD0EE5C895F3FB
+:10F68000745A3716EB417F41EAC536D28FF79A623A
+:10F690004568AF648F6FD98F74913DB7AC6225ED2B
+:10F6A000FFF2DCA80F50B7921F745975E0D488049C
+:10F6B0007BE110DFCF34DFE5A7E7D3BBB97D101ABC
+:10F6C0006D217B38D4A584719D9B039608DA416B2C
+:10F6D00015EE5F096FB0EB3CEEA3AFA0B8CF0F748F
+:10F6E0001E178A48FF6FCF8EEF23BD3538C8EF91C4
+:10F6F0001C3F3AF885CAC71FC368FC8E721EAFEA6A
+:10F70000B85AE7FE15B17E1DB3FC396EB407D618A2
+:10F71000F959C685FA9C8018186FFE7A3BAD43AE46
+:10F72000CAF1CCD26D5CFF0C960BE467CE9A2C1616
+:10F7300046C46FFAF91C2405D67345BB8C3739CB08
+:10F7400002456879BFBBE9B7AFA400BD66A19F8E33
+:10F750006FCAC268F7937F98D7C97DFCA00900C91A
+:10F76000C5D6FF5C577369425DBC3FF0FDDC6B6B37
+:10F77000F248EFF6B723D8A08F65DD6FD7311E357D
+:10F78000D0AE81BD6BEB52F8F761C7B5578E063C22
+:10F790002872FCFF5CEB477FA19D19C64B844F4B41
+:10F7A000EADF0CFD3B74F97EBCF64A78E1C10A59E8
+:10F7B000BF66AD1FE0BBCF6CEC8F502ABEC78A1C62
+:10F7C000EFD6AC6DEBD6E70DD8056027EC1A913972
+:10F7D000601FAC7E7B66FB853056AAEB530BEA5D5F
+:10F7E000A9E7431E85EC8F647E3D20E4C3DF2C57E0
+:10F7F000F54176F4811124577B66204BC2FE83E4E9
+:10F8000076687980A13D07F64817C2DB7BFCE3D31D
+:10F810002F427BEFECDF1F1BA9E37BB7CE45BB3745
+:10F82000744E23BA0DED53230AD0AD4DF00BE871A1
+:10F830008A0B487A5AEA1274EA0E338C73741C529B
+:10F84000268589BE5A0AAE83B5CCF7F85F4238E404
+:10F85000BE3279DEBF1EC1F70FA1D2EAAD25D8FFB7
+:10F860006E85A19DB0AEF444D602DA37BD9BB530AB
+:10F87000E1BB255D0F123E97EC330F89C75F8FE028
+:10F8800071DEE6679FF6A3DCF828A2904C68D022D0
+:10F890006BA740BDA1C1849620AB8CCCBB91E21C70
+:10F8A00075163606E67704ED268463DF37C353709A
+:10F8B000DEF04F8147DB028B489F6EABB339284E99
+:10F8C000543AFF56C2832BC58F7858575A9D83E30D
+:10F8D00034CF9AE1A2F808D871D8DE7CD7B7C82F08
+:10F8E00024E15AD765AE453BA70AECB9A700EEFC68
+:10F8F0008C6B6A7DC0C723D5FDE5B73B305E3EB457
+:10F900001CFF6E26A78B362510FE4625F94159A20D
+:10F910005FB3B08BDB8D9F8DB018E22B9F8DE0F62F
+:10F92000ECA5E1D874249FC35A4F2ADAD321E6FF0D
+:10F9300004F7CF2CE0D0F7D03A7179E469D5C93F0C
+:10F9400066F3F4DC7B21B65FAAD1FE85693D0FE04A
+:10F95000B8BD6B3DBE754CF001D6EF2AA37D4FBDFF
+:10F9600027A87832F9BC707D7B9FBDAA1CFD88D288
+:10F97000EE5AFBA89DF4E65AA77E7F2DCAD3DF6915
+:10F980003C1FC0168F4D877E96FE3E83C65D6B8FF3
+:10F99000ACC5F50FEF54A9BDD8117460BF4BBEB90B
+:10F9A0006522D22B73444A508F9A3DED0CE918B66C
+:10F9B0002BE42FB179020CE3C4D3C3F33405F5452E
+:10F9C000923D331DFD55B45FF190BFB65AF0C71894
+:10F9D000A082D3366285B63F8F18B06F5EF9E31C04
+:10F9E0000D1F4ABBC764E3FEF39ABA1486F62D5B7B
+:10F9F000153F66427FBD27C6D00E6EEA54689CA6AE
+:10FA0000D2272DB86FB9A593F37748EC33007F0563
+:10FA100068578CF1A40A7BA08DFB3958ECD848C4F8
+:10FA2000F3637C3D1983F712FCAB8CADE0F240F43C
+:10FA30006711718626E157024D48ED3E8FB45BEFAA
+:10FA400016FDB7F3528CBB5989F955C46BB962F0F6
+:10FA500087CBF22AF17DFA91F80CE4DF38D017FA5F
+:10FA600097B62AB36EFD29CC6FEBA4F13E34C1BC2E
+:10FA7000404E6A053E075204BC57767D3203E98644
+:10FA8000D532E2D7E6AE696A9383C76FD05EC84EBF
+:10FA90006DD989EDD93797927EC6F8C86C78FE3556
+:10FAA0000FE7B31C07F7D779EF0E1761BC33FD489A
+:10FAB000E0D69FE2F817A490BF351BD6C69941E562
+:10FAC0001AF46F7959F98BA87FBD33F50A8447C6BC
+:10FAD000F5302E38AB8CE438D5337C8A7F179437D9
+:10FAE00078DC340EECEF6A115E7C1E710CC419D107
+:10FAF0006F87E3621C0FCBDE9CA8467E7ED0E77B3F
+:10FB0000904EBBAC2EC4D7CCAE97DF427D3BD3C664
+:10FB10003A29EE9A64B7C4D3BE19443AED3B737ADE
+:10FB2000C73D08D775077D94CF92648F5C7139B754
+:10FB3000CB3FDA93AA233FEC12721BEC471E7F796E
+:10FB40009CEF2393EDC8EFF6AF2FB723FBEB7F7746
+:10FB50003B92C317DEC3F328A47C0F897D5F5FC38C
+:10FB6000D934D45F2B3DD2AE4DCAF7D82DF23DBA71
+:10FB700087CEF7D076F2F80F864149EEBA2D22AE45
+:10FB8000E5F7CE43FF87BB84E4C02B7B53C34837E4
+:10FB9000673BED6497696E4B14E16A7BDA1AC13CEE
+:10FBA000883645E0EB90885759441C2CA344478382
+:10FBB000E2A02540723FFCA499C7ABD2228FEE850C
+:10FBC0007AE3E11C11CF62D47FF8D954C277638AFB
+:10FBD0009E8EFD37FEFB088671AA3E180FD7F909E5
+:10FBE0007B70BB87E25ABC7FF68255E7F1B3688928
+:10FBF0001BF0B033C2EDBF93A5A6A805E6BD93895F
+:10FC00003C9FF532AEC5E7D9B761248FCBA03182D6
+:10FC1000FBB2B5DC5F542FE35587B91FAE5EC4A5B8
+:10FC20004ECE5EF408A658B4292DB5B84FFB7CDD46
+:10FC300034F29FDF79FF2C2AEBD718FDFD8BD03FE4
+:10FC40005F3C103F967EF7F9CC67E1F6F380FFD07A
+:10FC500004F68CBE46AB46FD59C45C77A33ED0C3C8
+:10FC6000B07A1743D906251AF10A6019DED3D67A7D
+:10FC70005270BD57B799486F85DB4C7E7C4FD2CB15
+:10FC8000AB1EAE67DFF570BD03A88EE038B26C33F3
+:10FC90008B7883E86F053345B13429BC5CEDD26ABB
+:10FCA00087D2DFB2BF36738B6D1ADACDF926F277C1
+:10FCB0007F6EF1D791BF38A384D6A9CDD9B2A696CD
+:10FCC000B7132F7D6E8F07A8FD328D1B964CCF404A
+:10FCD00079FA8287C71792F1B6B0DD584F8EC32CE0
+:10FCE0008918EBF52C3836A798C70D129FBF20F462
+:10FCF000C4E7EB8A04BE7D1694BB72FE2BF238DE9D
+:10FD00004CF9BC1C955F5D8774300AE3CA45587294
+:10FD1000BF2ACC84E01F75994721FA4882B7CDCD20
+:10FD2000E929BC96FB21FF5AF893E1FED09325F810
+:10FD3000D8EFC5B865BDCB4271E8F3F597A4641A56
+:10FD4000F7B7FDF5BFFFFE96EFE7D7AA22BFC6457E
+:10FD50007269BE8BCFE5A4E2DB1BC5E70EB01F7056
+:10FD60001E6BD50A9423D3BFE9A079341F063982CC
+:10FD700071ACE53D05A8D79BAB7B4A305E938C5FA9
+:10FD8000845693F20CDE9BEF81FD08DA0D6B8CF14B
+:10FD9000B8C1F1557F616626EE7B4EEE7F19F5D72F
+:10FDA0007E3BE92FF8BF17ADC8FFCF16915C8B38AB
+:10FDB0008363312E144A89EEF87111DA31DC8E6AD0
+:10FDC000EAB6EE443B717E5B427C0FFFB3DE18EF78
+:10FDD000636B32C8EFCE3A8CCF1B1E4EFA6E50FCCE
+:10FDE000AF9DD665B325380EF91DF410E51D9C595D
+:10FDF0006262B8BEF5AA6F112AA93376A37D7EC6CA
+:10FE0000C9D76B46A6D43F3EB2BFFAEB83D6D957CB
+:10FE100082EB5C6F62C1C47E9A709D617D1BC53AA6
+:10FE20009F79FAE2125CE78FF75F5C82EBBCD9DC6A
+:10FE3000EE47BE297507AF41FC9CBA3240F615E685
+:10FE4000EF201F9D2F3DDE94448F37FDE3E8B12E58
+:10FE5000311F32593F36F4E3CBA81F3D163D0FE565
+:10FE6000C17C9BF52FEA49FC1BD29F67B392FFE34D
+:10FE7000F01F3FDD48F918DD2AD927B2BFC35AB0B9
+:10FE800018EDA3C36F797D6165F8FED385FDE5B5F7
+:10FE9000B130FA59E4BE40DA97C9F278B998CF0385
+:10FEA00099FEDF8CF81BE23CD27FDC20DEB1453EC0
+:10FEB000E576EF6EC5C7FDC79DE44F6E3E34CF8536
+:10FEC000FEE20F22DC7FDCFC7439F98F97445E8AF6
+:10FED000623E19EB565CB81F59B2FBDD34CC03907F
+:10FEE000FB5ED8E7DE9F49F935C6FDEF07919369C0
+:10FEF00098370070BF8F70A77AE216A4FB66D8FF10
+:10FF000061DE60B3163F86FD367B18D905955DC668
+:10FF1000FDA08CEF6E0B5848EE6EEB562228AFB367
+:10FF20002CC1A23CD46B2CCF753A7580CF2299FEA0
+:10FF300017907E07E2EAFE5D5897FEA79EADE94462
+:10FF4000BF3D66E677A13CDBEA14F24C23F9F6DB11
+:10FF500087DD91750976C36F23DC4E5822F3C134D7
+:10FF600016D560BD16CDF11FC7F546791F4D92F726
+:10FF7000897519AFBF8545492F35B19EFEBCB0C408
+:10FF8000F792E3F9180737F4C35ACA75F493DDE41E
+:10FF9000F0519CABEBCF56637B98EF9B811F96553E
+:10FFA0000CD0AF5C0749BFCDC21F1D6A38B10AE94A
+:10FFB00037D4A5B8707FDDE8E3F4DB08FB2FCC9BDA
+:10FFC0004DE677D669CC131D8EFF7FDDCF779CFF82
+:10FFD0007F3DAC9CFAC7F85BDFEF973F9CEFE5FCF9
+:10FFE000A5FFBE7F9EDD0AE7CBA47925EF5B93FDDD
+:10FFF000EE72DF79BEF2F08B247C7CF10FC6C77005
+:020000022000DC
+:10000000F230256BE8FD42725CE3AF9687FFE0F8C3
+:10001000C623871E4A3381A8585214F672BBCE6F8E
+:100020008817CF501D7E1E3755793E4572DC5D9F87
+:1000300021E2EE9C9F5F7A5AA5F56A12F1E1A64390
+:100040004E1FBEDAE0584CF1D9E4F8E952B67F060B
+:100050002E51721CB511F9B8F8CBE3A91765393DDB
+:10006000249F745684790AC9795A2F393E1D114C40
+:1000700058EFEA32D8080C41D7362DCC32129E4FB9
+:10008000CBE2F6F44B229FC86BE1E705EE73A6FACC
+:10009000711FE335F17CA77C4F607AD62494EF0280
+:1000A0009FCFDEC04C809747CC9D244FC24D0E1F82
+:1000B000CA3FE9C791FDEF10718BF3A5F36F671984
+:1000C000E9BCBFFE4FE2FB8592BEFFDAB8DD16C089
+:1000D0008D811F18D1EF6B18672A1A4CB7C3F533FF
+:1000E0001CFD2ECB0ADC9E4578F14FA4FCE6F39470
+:1000F0002FA995F193E82F6207AC3AFA376DE2FC2D
+:100100000B5B9F23F6EBBEAA599497CDCF8FC87394
+:1001100036C3D98F1BFBF99FDB8FFDF5BF93FDC85D
+:10012000DC81769CE7A9697ECAFB5FED04F8715F0C
+:10013000F8A875C8F32CF2DCC597F95DF6F6C3CDC7
+:10014000E96AEFB070FF63E5E793FF34F9F9FB3438
+:10015000F4A30EDF4F58E47BC6FC229EC67625F83A
+:10016000B743319EAFF79280573E7F44E8C5F46CA9
+:10017000FF515CA78F8FDB6C2C1D4C9E4A2E179B6A
+:10018000030E8A2F3477F2BC97E6E58CE47733FAD6
+:100190004FCBD0AF388BA1BD373523F833FC7EF57C
+:1001A000DB8EB09A8E7EF7D90CEDBBDEE3BCFEA9E8
+:1001B0003BF8736C0F2DEFA17846C7EC8F28EFAAA0
+:1001C000EACF9FAEAAAD2478C98FE0B11ACFAD7C3B
+:1001D00091C5E30FB2FC43BF3CF1935FFFE3069E82
+:1001E0009F1DF2F85DE88F907EF1543D467EA6E6B5
+:1001F00003DC68AB52F97CD8F7F3889E9A0F4C2B3E
+:1002000047FF29EBB497A39D5BF52B07EDF73EBEA7
+:100210002B97F224EA3DC10F513E3A2B2357A35DA1
+:100220005A08E3A0BDFBF1FEABCB116E29FF36A34C
+:10023000FF1CC6DFEC34FAC7998DE7D92FDD9B4F41
+:10024000FBCB6247F053EC6FB39DC311DE23CEA30B
+:1002500008BF7932FF4BBECF564D344EF6B76D1402
+:100260002F977261B399056DC503F2E478962EF26B
+:100270004C445E63F72C9EA722EA0E8F31BFF381B8
+:10028000CC2B8F233CC7B3B4AF961FE618942F40F6
+:10029000FD627E18C505589CFC2DA9E7B81D3DCA16
+:1002A00065217A7202DF519C06E809EDF94BE3B152
+:1002B000E9789E6B7447F452C4F3E17326C2933617
+:1002C000EB358AD3A42B7CBCE2F53D6BC7A21FC6DD
+:1002D000F5E665B8A47ABBAB1A513A3523909F4D29
+:1002E000FB8C96521CAFFABFCC3C9FF2502AF917F8
+:1002F0003A0A1A299FB2F76DABE13C4E7219667744
+:1003000053FEE4A8AE5F50BCC0794019322F76721C
+:10031000B683F0D61C8ECDA01C9B4B3D2467B54305
+:10032000BFA238B5B6564309C4DACC7E139E430B40
+:10033000AF60E4EF1CD3E132E17A158AFC98BEC3CA
+:100340007F9818A4FD8A8C0F44787E93B96715EEC8
+:10035000C3B4153D9787713D0EB84DCD65D85FBCD0
+:1003600099FC2D875219D24F6157F1DD53A15EB828
+:10037000C645F1B0BEE76E2924FF2ACC73CC10F33A
+:100380002CCA36F3FE0FA59A509F699B980F47D54C
+:10039000DC59D504F78350877E468A3C55193F4582
+:1003A0003F14EAA9F4ECE0D7303FB6FF1CD2B214F8
+:1003B0007E0E49E3FE12E7B2B71FC7F33D3B2CFCAC
+:1003C0009CE791C3136693DF6FADA6E03A7CEEE63F
+:1003D000F99437669B0CE74206F07F84F256471D7E
+:1003E000FA05D76B3016F6AF9939BD686B3D3BD136
+:1003F000BFB8382D4879BA97B545558A9FB94E3D53
+:1004000050AB27EC73B6703DD3BC8FEFCB93F73571
+:100410005FA65F6ECB36DA2DFDF57F92DDF283FEAF
+:10042000F1FFC6FD0A33EEF392ED97E47DDD203B4C
+:100430003CA9BFE1EC18998F523D300EB7A79DD271
+:100440004E0A1BF275AA1DE27CA1CDD8FFE5235C04
+:10045000345F99BF93B5525F8179FAF11F30F2D7BB
+:10046000C93CA27035CFF7099B6C74EED0CBDA296A
+:100470007F68248B2A0AF9D37AE87C6D36E611C1AD
+:1004800077EBB24751BFDB996F8D4AF25257106E2E
+:100490003BE69F50BE6A64EB221CE73A078D63C7B8
+:1004A000FC938B3085C0BF15E5EBF4061E5FC805D5
+:1004B0007D8CF49B3B9AD3A1BD8EE7A1C83C1399D8
+:1004C0001722F1502DF09B3B765111CAC1B54AF06D
+:1004D0005171AE99CBFF0D4E715E19EC6BCFC079A7
+:1004E000E43EC6FB0F3798F8796437AF778CD1F9C3
+:1004F00079A02FF839BB8E729E7732283F2509AF3D
+:10050000323FE5C9B4E011E497E4F3CB924E12D642
+:100510008FCE476F3BC4EDFAEA060BCDA36FC9350A
+:10052000E497EC5B6262A8FFABBBAD9CEE92C6DBCE
+:1005300056676151EC578BD8517ECAF5FF32BB1616
+:10054000D6B514FDBE475A6B2F3A05383EDA1AA0CD
+:10055000B2CFAE74AA17D2F9D2B928A99ED8F2F9AF
+:10056000B55A0EE6DBC40B142099E7B77E3493EA44
+:1005700099F177B0FEEA16CFD73490C37D63E23BA2
+:100580001478FFFF797FC4DB911673197BF7A1877D
+:1005900066861D5F41DFFD9125E7719C41BDD3C497
+:1005A0007A56C5C85F24F45D2597875E8785EC255C
+:1005B000AFC83F6535221F15233B505F99534E71DD
+:1005C0007B07D30FC4B03D8F9FCF8276A2FF956388
+:1005D000B87FDA26E882E549BF544F18E5DBCA2226
+:1005E000377DDF2F8F0F5823DC3FC6C77FE3E90B32
+:1005F00028BE25F36A1973E5CFB980F26C0CF5FBC0
+:10060000ECE21CA6E6CAC773EC2BCDC2EE15F5369C
+:100610006730C58BF3443E047BEE8D2BBF5B867C3D
+:1006200074E6E0F747A35CBBCA02FB8221E4D8EE84
+:100630001C2EC7FACC8E350A7C57E30C8EF0C2FA1A
+:10064000BF953A77061E29A81B31CD82471758F867
+:100650005115F19A29E8C43D87C3E7AE0928987778
+:10066000BAD2CEC7CD0C6A7E3AF7109CA35C077055
+:10067000AF54B8BC868FD2C98E2AD5D3F11C61A3E2
+:1006800038D7AA0AB97149E72615EDF59FB7BE35E7
+:1006900055D306E0FB858887FFA2C8783EA2DCCB55
+:1006A000ED6259CE56F50B90FE56ADF0BC36F31206
+:1006B0007CCEE9F8CAB4659598A77D556A4B25FAB2
+:1006C00069073D4F87E76509752B7FAFD1162FC0AE
+:1006D00073E60BEDC149888FCFE7BD7B27CA873B07
+:1006E00073DF7807F324DE300B3991AF88F5EE988D
+:1006F0009E06EB79ACD82DF23C6C440FC7C6723F16
+:10070000647F1EDB3885F2FA66CEE1E749AF65B15A
+:10071000B61EF89E9C15D03E637211D9913345DE0A
+:10072000C58CB70269E8179871435C43393A9C5D00
+:100730007495D7ACF724F0C3D5BAB17E6DA9B1FEDC
+:10074000359FB1FE8DC97F1A9B587FD9EE9F8DF4DE
+:10075000F4BCC2F33EC3973017D1BD4709A3FD32A5
+:10076000E1995C710E97E727FEABD8773D3399513D
+:100770007BD63EDB2E3C3720FDD7AA689FE065B6CE
+:10078000C20C7EEF03EABBB822F21C3D14D3610712
+:100790006F75713F2EBC6B817E0ECED3893FAA460A
+:1007A000DA52904EB21C267639F252A58DEC9A237D
+:1007B00082EEE4B9EA2A8D0530CF02869C83E51BE0
+:1007C00066D78BE8A70E7FC818E7DB691AE55B8A56
+:1007D00031185B41F587045D1F91F2FF079A585766
+:1007E000E04018EFECFA5C1E872E65745EFE6C65C7
+:1007F00009D525DD4BFE01AE1E8DA14145F427E94B
+:10080000F9A74E0BD1837ABF49F8BB34130259EADA
+:10081000927080B8C9423DC9C8FE9571BA7C9B6C84
+:10082000D7FCF87E0E93757EDE2B4BD4A1296AAAE5
+:1008300040FDFCF2EF487F3B7C419C8725CD46E79D
+:100840009386E3A35D827F7625F1914BBB9AF8E80E
+:10085000A7CE923B08EE6B9C2ED4AFA53097BA0C76
+:100860002AFD232AF03BCE4F6A8A4F47BEF966ED38
+:10087000F1A95A829C86EF9BF8F7A9C6EFBDF07DDF
+:1008800046C2F769F07DD9E0EF773B6D51D344EC78
+:10089000A74AEF217D18A5C95E23E6AD66F1EFAE4C
+:1008A0001179B1A3D3E07DD45BA5C63C1336D967DB
+:1008B000A3FCE4A4BC92AB94E539C85757DB9ABAC1
+:1008C0007BA0BF97C53A5E650A7EE682E72FCF2DF3
+:1008D000398AFC576B8B6898D7772D8BAEC2C5EDE4
+:1008E0009B167CC45D4CF2E159E4936635383603BF
+:1008F000EA67CCEDA36F2D22FE79CE9B39185E49B5
+:1009000027125EA417A43F492FC970F7AFE7D73B62
+:1009100029116F3BD851584ABB8AB1169E77ADE773
+:100920000FCC0B886886AD6534DA352F2F0993DC40
+:10093000B8CAFD00E565BD9C1BFC4F946775177E2A
+:1009400052A0E1CBDE796371DF00F0C6FE37E1959E
+:10095000F6E3A0BCE30F2D86BCE3E1F84C8E1B420E
+:10096000BB50C5FCE49D94471C9AE3F0E1799110DB
+:10097000E6C15652FC8AECC2E7146E6F87159BB035
+:10098000E3CE373F99717BAFA9DFDE33E4D77794AD
+:1009900073B83B6ED5E5FD35DC5E9CC7B83D394B81
+:1009A000B42F7451BBCCC3EFD8C9FD861D4F8FD572
+:1009B000B15FB003C97E60E9C2CE2C32DE9B837F7B
+:1009C0004AD640DEF86633B75FB7997C5594E76244
+:1009D000E1F7E29C91FE8C317CFC64FF626E8E62DA
+:1009E000884FF7D7FF4EFEC55277303F07FA5B5866
+:1009F000E62F504C0817F733027D3E1C6398FED655
+:100A0000321AEDFEAB59CB9BA662A2CFE21CA4CF5B
+:100A100009409FC506FA1C9D93C9E524C225E9B388
+:100A20009F2E4B93F3CA8217603F1DEECE5F35A316
+:100A3000BDDC6DF5F1BC5A9E27982C0712E059A039
+:100A400071783CAA4AF04CC27193E1391F3E49A427
+:100A5000CF6CC6F961387EC9D658D85931C02F2F0E
+:100A6000DB8335087F3FDFACE2FBA34170AB0EA216
+:100A7000AFEB6FE47194502AD747184FC981F167E3
+:100A800089F1AF5FCBE9F0FA7FB110DD02F8518454
+:100A90007FB6689FD5DD447954B36BCC2712ED0047
+:100AA00019B7A913EFCDF1949B9105E6CC34C64B51
+:100AB000EA6EE2F19AEB588B19E1BD7E8EB19F3A56
+:100AC000B6FE13CC0BABBBC9F83C98D31F67198B90
+:100AD0007196A3C28FD007FC82FCF4D3CCC50FDF84
+:100AE0000AF43BF6876515E877BA326BC9EE4D50CC
+:100AF000FFF1B6F154FF69D6B7BFF306B6EF28A1F0
+:100B00007A0D26B9E13E08F911F54DD58DD714C1FE
+:100B1000B847EDA2DF5BF939026F4AB06316BCE754
+:100B20009D388AF2216B84BCE95BC8DBAFBDD0C9BC
+:100B3000535E6FD6C9DF5893C2EFF579ADFCBF2B7A
+:100B4000303FB76694A8573C3F1EEB47954FE81ED1
+:100B500080DE268786F86FCEE57EDA09A54A741C0A
+:100B6000E0A52643F4DFC4E735B3E2D15CE48F9A15
+:100B70006ADECF04DFB4B5C5F89EE92CD57B736D72
+:100B800069280F259FB5E770FD2CEDA980E0FB6774
+:100B9000FCEFB68D807E0336C587530C4C7E97DF05
+:100BA0005FE5E0E7CB02FE220DFDBCD3FD3C7FB349
+:100BB000DAB62207F7E75F0F5A2A715E2E5BF9510A
+:100BC000B46FD2274F9B44F9BE3666463D0774DFAB
+:100BD000417C78F1270569486C0E23DD4BBA9A25D4
+:100BE000E9BDC648D7C0AFDB7232BF5C5E1BE8DA36
+:100BF0003E40D7C3D9B900D78F09AEA946FDD53F2E
+:100C00004E125F268F3B9CBCC0BF44793A005F27E1
+:100C1000F15F1E66C515237FB64BFEEC42382CA64D
+:100C2000189DB329547CE3E960EA307686842F1F4F
+:100C30007DAE1583E1C23F4DDA7FFCCF83FBF23CF2
+:100C4000D10EDFF959C6005C30FE2B240F577178A6
+:100C5000B62B2D5CBE087B5CEEE79BE57CBB8CF382
+:100C6000AD4AE1E7DEBDE87721DF7BF9F87EB8CF5A
+:100C7000631DE47C42426FCFB1059C1698DB75EE94
+:100C80007AA29F1B58F869B48F963983FF17F174C5
+:100C9000C4143E84FB9C85CC4FF157A08F77721211
+:100CA000EC0D096F329E9A8791A7C9F349C6CFC050
+:100CB000BAC5C8BE93E7D8FAE77B9EF3947689C796
+:100CC00062F4776508FF5486F0472145A17E9EC9EE
+:100CD000527CB82F98EE53C8BE98C96C249767D63B
+:100CE000727D9EE1E0F687D4FBC3F1C7159733927E
+:100CF00057331B993837C7E7954C87D9ACE70E2C8B
+:100D000067DAF4AD0B90EFD14ED107E09FE9E07EBA
+:100D1000ECEC5C213F58CF24D4F3FDF5417ABE675B
+:100D200012CA9FE4FBC9669EE3FED28C738CCA99FB
+:100D3000BE7727A19ECFA8ED998472CCE9F27B7390
+:100D4000270DDC1F988CC7D1B92619873B2FFA4C89
+:100D5000E61F193F6B7306C7E238D2CF714689553B
+:100D6000E14B151E97E83F588474EC76154D43FF10
+:100D7000C51C1BE82318BACB15BC3017E9ED8F0052
+:100D80000F6E0EF155C0E37535C17B343E2CE1E1A9
+:100D90003681872B855E3DFBB04AF1891A7FE94396
+:100DA000184208BD626611E2573FE94579BFD8593C
+:100DB00030A0A2F8FE634EB23316BF5A4FF195B180
+:100DC0005B4C4C4FD093E32229867B3226ECCB3010
+:100DD000D42FE8CC35BC7F61D728437B7974BCA184
+:100DE000FDA2572A0CF549B12986F72F7EABDA50C0
+:100DF000BFA4E71AC3FB533F986DA883C6D070DE2B
+:100E00007B9F55D83698F765F16F19BEFFCDB6199F
+:100E1000AF60BCF3A4D8F7B2B03F560A785820E9C7
+:100E2000F6DC7C637F5125AA5421DFF3BF05EB7903
+:100E3000BEF634C05C62BF0BDB8DF6C4E22DC67A11
+:100E400043F7A655281B07E779B454E35539C97908
+:100E50001E35AE7926A4CF502ED817E31011EC62C0
+:100E6000CC331B8ECFBF6CFD4BD8E82F5B7FFEFED3
+:100E7000160BD9F58B5F7DAA2A0A8FAC5EE3FADBED
+:100E800075E3FAA7961AD7DFE933AE7FFA64E3FA7F
+:100E9000BBFDC6F51F516B5CFFCC8071FDB3EB8CC5
+:100EA000EB9F1334AEFFC806E3FAE7B718D7BB7061
+:100EB00099713D8BC24B0DEDC9EB2FE565F19ADBC6
+:100EC0008CEF017A4D097420E96841A081F277C660
+:100ED000B47FCF304E323DC0BED144F7BFC13E6E6D
+:100EE0009B72FEF401D28AFCBDC9F4F16FB9C2EE67
+:100EF000147401FAA813E50AD8174F61593756D868
+:100F0000FB81A1ED0B29BF12F579E2BE7838B93625
+:100F1000484F897DF2B07A0AF7C9F6817DF270F404
+:100F20007B1CB38FC88E5A4F7EA51B5D1C8E4FF164
+:100F3000D125E8CF7D82F4F271007032C07B1CE7CE
+:100F400003E31F4F9940FE8D6FB328D9EDFF82193F
+:100F50009630D8CD98A8ADE23D4F3A95F5426F2F27
+:100F600014FE8F85F6E05BB9DCEF519885E3E6C5AA
+:100F7000E8BC147B6DC479DD237102E30820784F4F
+:100F8000611C01CA5E3BA79BD352AEF899EE49C0E3
+:100F9000E7FCE94A29D9B56A0AE53DCDBF4121FD03
+:100FA00034FF7F781917FA2CB95CB94CE2B35DD8DD
+:100FB00003DC2E48C7C39A1477624107E1CDE7C22C
+:100FC0007586FEB81FFF47FC7CCDE30AD32667D0A9
+:100FD00031335A675C6F3C0FA5DA389C8F9B990DB3
+:100FE000F1398105C90EBC5703D1C6FB1BCFFB7B72
+:100FF0006314FAD354F5FF7CAD06E3CF382EFA9F85
+:101000001D3E86FE66D5EB63E8BF1AF4FCC014BA39
+:1010100024A3BFCEF87BF88778917EC23C412FBBDA
+:101020009D8CFBBD92FC86235590C098BF63E6E77C
+:10103000C3BDDA16BE9F3CE65B634D9837636637E7
+:101040009EE7FB327B08F36D4F27E4C7C3BA0C79E8
+:101050008FE9B43CAEEF57B6365C8671A25E1107DD
+:10106000BBA7357819AEB7AAF9282F0EEF5772270C
+:101070007C6FF1407B029F6A8E0643DDEC08105EB8
+:1010800056B5B610DD98C53D50ABF36E730513FC35
+:1010900012178E14F6862DCC5C594C98C6F0F7C109
+:1010A0007486F3555DDAE9C47DA8D50BFD25CA2BFE
+:1010B000AD9025FAADD7B4B610DCAB9460103BB35D
+:1010C0008E66513BE0DBAAE1595478BEF52A92675F
+:1010D00016E76D3EBCF76738FC59BDDAE78972C880
+:1010E0003FD22887EE6FB55D8EF85AD9BA8CC69379
+:1010F000786B6F755D8EF58DAD5ED1BE82DA4DB5C4
+:10110000BA82F4711A6821867116ADC789713DB033
+:101110003319C603CD5E5B0499C8EAE1F0B2A305BA
+:10112000441F735D1C06F48DE5037DBCB3CC4CFB02
+:10113000D3DBF31DF4FEEDAF8F79D10F7C60011E80
+:1011400051FF8AF9F48F23F06711728869C100F2A8
+:10115000952557237F74866B36ADE3DFDA9FC4BBDA
+:10116000C5CE281FD492EF20BBEB7CE10C8D14F789
+:101170005009BC27E30FF04472F47681A7DBEFE25D
+:101180007EBEDBEF6094C7CE96C15FD5005D8D1447
+:10119000F2259B05A86C6F05C15282EB6563410B7C
+:1011A000E875D6492FDBD1BF83ED7ECD8DA1EA4D09
+:1011B000359E59586E9C7CAA1DD9F1BE4B3F8B6160
+:1011C00089BE74C497AB8145F0CC1FC58E3D781D98
+:1011D00035AFA789F6B43A5E4F17EDE9015ECFF758
+:1011E0003FA9D4206049F1977C47C6D5A351BE2DB5
+:1011F00060FC7CB2B8E7603B13F2C29131AB06DB16
+:101200006F6274BE40B6FF50B4E7384EAC29463921
+:101210003CC7F8FD5681876CC789F6E9149F31B643
+:10122000CBF84AA6E3EC2BF47D99B1FD41F1BDD397
+:101230007136361DDB471BC7DF20DA531D3CEF0834
+:10124000C4213F472FDAEF15ED766CC7F14B8DEDDA
+:101250006BC5F82B9500AD433F9F89F8E48E569DF2
+:10126000EAC97CF6EAC80C7E8E59F0996B191BF21C
+:10127000DCFCAB2379BE4C9ADEE3F70F210F657BD4
+:10128000864BA3B8AFEAB5101D591D428E083EEC3F
+:1012900097234A8B8F1317F7977F193D03E17E8EB3
+:1012A000F2AC00FE909EF3BE6362C1047996DB98B7
+:1012B000C28209EF7B176418EA5937E51ADEF7CCCA
+:1012C00019656877548E37B4B3583EF1C76D82AE56
+:1012D00052CA2A0CEDF2BE02A6733E9276B579F49C
+:1012E00014C37B674BF574A4EDD357CBFBAB7C36B3
+:1012F000940BB7394765231FFEA475321ADF20EF20
+:101300006CA27489D24B47C956B6EAA25E4AF5C7A9
+:10131000DC3CAF7A65AB8FD78B189D6F5ED95A4B8B
+:10132000F5C7812FB1FCD7563F957BA00E160EFB5B
+:1013300011F4AF433F3BA17FAC3F02FD63B91DFAFF
+:10134000C7F287D03FB66F857EB1FE10C085E583BA
+:10135000D00F3E7F00FAC7FAA6D600D5EF6BADA33B
+:10136000FA86D62095F7B636D0F3B5AD2D545FDDAD
+:10137000BA8CCA7B5AC354AE6C5D43ED16A1371FBD
+:1013800013E71F1F9BC6CF7D27AF7F469EF2D5EE8A
+:10139000BBA804455E65C893C8C8C37D75A7312F37
+:1013A00010F14770D8391E93E1182BE018CF622B4B
+:1013B00052B9DCA038EB982EDFDDA9C0A7235BF87B
+:1013C000BA1775C5A93DA7818F3756CC9379C22C22
+:1013D000AF8A1FEFC5F77A9558752A8F37931F8309
+:1013E00079013F55E2DC339179C484706993417F80
+:1013F00027CCB31F5F6E0E27E26D28782BF2787C26
+:1014000043ADECE4F79BD4B64791CD52FC2D74BFAD
+:1014100089AD2E10D5A0F40482744FC2F8733360E6
+:10142000930572EDDCE54C8732AFD1B8FFCA5D5051
+:1014300061D8E7A8E73632FD22E8B7CCB84F4A19A1
+:101440007D9BE13B5BDEF70CED16CFDD86F6F9B751
+:1014500014ADF2223E47328A3B59D7AF603900D7EC
+:10146000C28E4D045750E0BD57D1F9FDEDFBC5EFDD
+:101470004408FBFFC72E812FDB7ADAD78E75F36A1B
+:10148000497AD884FAE7E3A7D2498EEE7DC444FEB8
+:10149000ED712C6242793301CC486CBF006F7256FB
+:1014A000E9CA1C15EBE54C57B17E118BD3BE08EC95
+:1014B000FF3AA417B0FF1FB143FD4C7EF0C73CBFFD
+:1014C0002B4A7ABA44AC6789DC076DD192FDC373AD
+:1014D000F3C85F633C07D626F6012BDC55D918EF1D
+:1014E000ED1D26FFCEE9FDD6D405B01ECE9C3A2ACE
+:1014F000E5F30DBA69C873D1CBBE2ABF6C013D625A
+:10150000E4976508FF99CA9F67A1BBAA79749CF804
+:10151000A6CD2CE5989E8E726CA0EE4B27BBA23B0D
+:1015200087F0A389F5D9DB1AA4FC00394FED77D3F6
+:101530005C980F5622F24FF7B5DE3AB526211F66AA
+:10154000B7A0DF5216AB453D5A5A66F245A827AF01
+:10155000C17F611FDDEEC773FA5A05F3A1181EC7DC
+:10156000DAE9BCBAF6854A7940DA914B980E76B042
+:10157000C31165E1B2817E99F0837C47C8F5CF5CE9
+:1015800035340FAD40DA473ED4DDEC33873F867407
+:10159000F7598799B3E509637BA983919E5B546AE8
+:1015A00089E80AA623B4D33D8BDA0E85E515211C04
+:1015B000D3BDF3508F1F4C25BA4DDD524557C37B29
+:1015C0004CC1F57900C7991EFDA0491A57F05ED3AA
+:1015D00004CB2EB41BC7225E709CD1A584C7856244
+:1015E000BEFB5A57109E9E15F368CBEFC73B87870B
+:1015F000F9FC78CFE9A20EE9BF31CE734365F53728
+:10160000F0DEC6953155D874467CAE33C726CE532E
+:1016100006E002389F453855849BFCBF7C7E4D8F89
+:1016200070BF19C8B15A8ABB4E32B1C4B8AB2CA333
+:1016300042FECDC87311BC4EEFDCA90B2E4AACDFC5
+:101640004474FDB8C2E71F766A3C2FCDEFD713FD77
+:10165000C4EBE47E599C7F4811F0F6DFE3369EE749
+:10166000613A586C0BE62D0DB71FFE252ECAA4C497
+:10167000FD30E81818579D64A33C9F75328F4B7F4F
+:1016800043C77C332CF1FC8A4DD0E96AA731AFE423
+:101690005C1EB777CE89F5E8B371BEC6B8647956DB
+:1016A000C2BD17DDF5E4FF9171CCBE6E9E0F2EFD1D
+:1016B0006B4B0409F41DE578E87B58A5F8E592EE3C
+:1016C0006BF97DA1871EA07B56A12F1DE9A15EBCF1
+:1016D0005FBFC6E8EF59B03BB02A451FEC575AC46C
+:1016E000C2E4D748F62725FB917E9B27F6693E5634
+:1016F0008E71CA93EB8B8FA5E07EA688D1B9DB9162
+:10170000EA93748F3158FBED784F292BE3F7F424DB
+:10171000AFFB250516C2F33EB9AE631CE467D837AC
+:1017200089F3FFBE17CF7E7D0CF4F396AE18CE8101
+:10173000BCA59B098FE381AEB1EC64AC76A8FBA09D
+:10174000B2F34D5FEDBCC0A5C6DFD768EAEA3996B3
+:10175000AA93BCCBCA0778FA8EFD3EAD8CF8274E13
+:10176000BF075157C4E141B8F1FCCB7ED3277313B7
+:10177000E9607CBEC6ED837CD35793BF3546B8CEB7
+:1017800094BD99750D876B1CC2D51B3D919568B7AB
+:1017900048B8F60F73BFFAA55F154F938DFA200175
+:1017A0004F53FF129EF65B86866796C0CF4F8EF230
+:1017B000FB4206B77F45FDD56184F7CC63B1EB51A1
+:1017C0003C02BCB3087FDE5359143315F8EBAC145C
+:1017D000F45929E48E8FCEA8B0D0DB17537E5EA7D4
+:1017E000C6DB43772E8AE07902DF8B0B0AD1DFE07C
+:1017F0003C6EA57B9E42497922B25C2FE6B13F57F1
+:1018000019120FABF3B9BC78F1B5F9D4DFBD6F593C
+:1018100019CA83ED22DFF55E57A70DEFEF9578C467
+:101820007A0594214B7C112ABA7B2B3FB3E98E2198
+:10183000C633F1F1EE4BE21B399E2C57E49772BB95
+:101840005439AAE23987FB2E7D93EED9BAAF5223E1
+:1018500099FB37E37F7D12FEA36F667D9DD3CB8A14
+:101860007CF4A32AEFA57D03EA2125FEB332C49FB1
+:101870002548F30FBD6D653B95C1786A14F42BE7DD
+:1018800027E72FE1765EB680CE99E07A20E0ABC5FF
+:10189000FB524FA40BBD87F3223D71A9C6CF894CE3
+:1018A000D2685DEF9B3C85CEF5EC17F914F14B2C1B
+:1018B00043FE2EC333026FF79EFB450CEFA90D7755
+:1018C0009BE95E05A6F578BF0974147A5DA37B9A3F
+:1018D000819E6AF1DEA8175F3B9B86FBE803F966F1
+:1018E00082FB403E97877DE7D45A3A6FF3DA672E42
+:1018F0003581FE9FCE57855D128BE1399A8D15FC9F
+:10190000DC8043D8018ED74E3520FC8EC9DFB32A48
+:10191000097A764FBE95BEDB688967F9300E744848
+:101920006551EEDFA1FBEFFACF0BBA381E9A2B8F71
+:10193000929DE0E8E6F7E23D9DAF135C08F7417841
+:101940009E32EE33573DB657C278A306BE77BAF83B
+:101950007AA64CE2F7D0DC77E9CF5D78EF5EBAC2C9
+:10196000E8FEE84B0ACC06395E5FC4D7A1B3321655
+:101970001B85FCE5D228AFB6337A9B0DED7AC917EB
+:10198000A347A9F4DD6A9197BE7A7229F199A4E37D
+:10199000B905C157916E36025F3C49764E2C309D99
+:1019A000F0E32AC7FCE3C795581DB73F2C2ED42F70
+:1019B000A5269381DF8A0B38DDC812EC52B277EE90
+:1019C00010B42CF57D5BC4C630BFFFB7E766A5A396
+:1019D0005DDA9627ED3CBF0DF1B55D09A417E1383E
+:1019E000FFA5D2BEEFC5D74E34E0B86D302FE4DB93
+:1019F0007B7EEA588FF6499BCB4F7C2AC7D7DC26E3
+:101A0000B11EBC9FFD16FF2BE86F8CBBF97D4447D0
+:101A1000A65C6343FA87F74CD8CF7BADF80B1AD896
+:101A20004F0DF90716BA66CFC0EF16B1E02AB46BB6
+:101A30001775A8867B17EE11F262E1B914164DD81E
+:101A40001F2C9CFC2D3A37B6F05C1A8B82BD758F2B
+:101A500038177D8F3857C40A383D3B44E915E5DF18
+:101A6000CCF7BE24BD95F9CBBDF339DFB302E8B79F
+:101A700049E9B114C1101BA7FC9ECEEBBCD7EA62AA
+:101A8000D192047807CD73048B268CD3FFDE391BEB
+:101A9000CD67607D39FD0ECCD7417878AFD54B78D6
+:101AA0001CBEFF91063C0EF43FCA80C7C1FD97D013
+:101AB000F8EFB5967E49FF1386E95F37C03FD0EF58
+:101AC000681AB7F7C8FC1FA702DF1D89DEBDEDF954
+:101AD0004AFC1D332BFD7E01EBEAACA673848F33E9
+:101AE0003A677AE7E1DFBD83F99A77EEB2F8708C56
+:101AF0003E737CAE6F083D339AB9C2789F972CC76E
+:101B00001714D37C929FDBB4880BF3326DA59A0B2C
+:101B10007F1FD1C66291BB71DF5269233927E3422F
+:101B2000B2DF3FE5A9F23C3BC907796FCB12919731
+:101B300057EC085E81EBBED4D4DEFC13F8F683D2FA
+:101B4000363A37CC989BF633326EA3E12FBF15A3FC
+:101B50005F30C0F0FCCD137A70067EF74310271873
+:101B6000C7512FD81DC4BCB50D62DFB8C11EF3FA32
+:101B700012E4E60D05DA57B317DA93E876D22FF7B9
+:101B80004639DDDE50807E2235F6C4FC22CCB7ED2E
+:101B900011F776E9168A77551EA3FBFEE6CB7DFF8B
+:101BA0009AE4BC8E7C37DAD132CE94867977686B32
+:101BB0006CE4F7BED5A7F27AFD7F8CA07310B0FF5E
+:101BC000492D43F9B25FE5FE2011DF3A2BE6D067DD
+:101BD000DB5840F9F7221FE46CF74B74AFE4D935BA
+:101BE0006368FDEB5FF83EDD0BB73F97EBB1BE439B
+:101BF0004ED263F5565F15DE5BB83F97DBAB9D5A5F
+:101C000034AD22C17E5D9D574DF2F9E335634C89B9
+:101C1000F18FEF0A79B051FA37B578159E67F9B8A8
+:101C200032FA33D2A307ECF43B51A683BFABA2FB3D
+:101C30002D375AE97701AA0F8EDB5C87FBC3348D01
+:101C4000F2914D07ED04CF9975FC7E2DFC16E55DF4
+:101C5000D3C191F4FB56F5A971CA276C4AF195607E
+:101C6000DCAFFEE054BAD7FFE486710528FF4E646E
+:101C7000EA0574AFF1063CF409F54363F9F3B517CF
+:101C8000D37955E7C6D4E0507E10A98F92EFEFDAF2
+:101C90009F5BDEDB85F81967F3A1FC7D4FF1F1B89E
+:101CA000EF2BF1D93AC515F9F9D27AD769FA7DBC8B
+:101CB000FA8E776F62F4DC43742BF773C9E3D50BAC
+:101CC0007DB5DF129F8BBF4B56BF52E05DFC4E626D
+:101CD000BDA99C7EAF4FE27D63D23DB74F08FD2486
+:101CE000CB93AF69745F20D81105E81F3A79D84AC1
+:101CF000747672E3043AAF2EC7AB079CB8802F4FBF
+:101D000064E813715D9F16F2AA7E25DFA7CAE7304B
+:101D10007E0C7FE7307E48A5BCAE3E573C0DE3927B
+:101D2000F23D59EF9F4FB74ABF97B53FF7455A6FFE
+:101D3000A02786F4647AC1497A3AF4827517AEE72F
+:101D4000C7952C8CFECFF05BFCF7C78E1CB292FDC2
+:101D5000DC779CEF6F07DD9FE68817E0FDA1A117F8
+:101D600046921CEBCB8FEFE0F6B69DDFABF846F06A
+:101D70006211FFCD11F711E6A09DF7F9217B14ED5B
+:101D80003C28299E1066BBBDF4FC702A43FF0F94CB
+:101D900014CF63CA012FFDEE0C6B17DFC7E8FB3BC6
+:101DA0000B8263512EDF590CFD3BF0FB53F4DEE751
+:101DB000A38217520C8AB15C315E2EF59B1F2CA4B6
+:101DC000E7CA675EFE7B2AEDA23D46ED216BF0621D
+:101DD0009AC7AF9C6CE710F3FCAAF7EE1D2D1841D3
+:101DE000EB28E1063C93DD988C97B30526F17B3B0D
+:101DF0001C1FC974D9BF9E5F021FFA5FE8BCF621A1
+:101E0000BE8EEBC659B81C593B81EC63D69662C8AE
+:101E10009F5B7188DFC3D0BBC149EBDC67F63F84B1
+:101E2000FA28FE8699F17BEDC022403FC5E4A1F976
+:101E3000E523914FBF642DCFB3FBE8D1F70BE63913
+:101E4000F05CF2FB8673C9D25F089DA4A13FC6E196
+:101E5000D3D3E697717B5D25F8F8EF7A6D34EBF418
+:101E6000BB6BE10DE3C81F71D2A21FA4DF875B77B4
+:101E70008109E94A2D17F277139F9FBC2F4BDE7B18
+:101E8000958C9F8AC262927F4D2C7833DEA17E8230
+:101E9000E959C26146F7FF917BDF8469889A9FE226
+:101EA000B6AC85F4C2E07BF62C5FF2BB6CFFBBF5F1
+:101EB0002A5C2BF4EF9587D350AF7EE0E2FB463AE5
+:101EC0007D8F7A5DE5F36CC30F30AF8305A6144EAA
+:101ED000A27692871F28BC5DCAB941F3477AC17EBA
+:101EE000F03DE8EB9A42EE7F63AE0C71C82B6CC1FB
+:101EF0003C4DA99F428A66C273F3A7DC7A1AD2E3EB
+:101F0000A9B5C5192B300FC6AD6725DAD5A1A38CAD
+:101F1000CE8BEB78DFF8C5F8FB32FE89E8F7DB9F64
+:101F200061F43B24C3F3E4B49EB989ED730AB99E0E
+:101F30009B5F28F699854CE45726E38DAFFB62B191
+:101F4000EE6A79F072DA8726BDB7784BBAA087A41B
+:101F5000E7EDCF7F97F2A01E36DE1349B15F18EF91
+:101F600083572C61E5422C5328AFBD611397730D45
+:101F7000AFCE2CB98BD7E95E85693BEFA1DFE35982
+:101F8000B0EBCA12C6E516AD83A4C70505FE12B4B0
+:101F9000E3E25B5517F245C31695E051CD3ED756A7
+:101FA000787E7A8B99ECBB0601CFE9BC601AAD9BB9
+:101FB000C6340BE0FDB4164C23FB75ABF8DDA1A4D1
+:101FC00079C07B6F6A1543E0C7C6D799F0533C04CC
+:101FD0001DBC61A2755A80BF0B8970EC54C8BF79D3
+:101FE0003A3F7833D64FC1FE1FCFE9AB9B96D07DE9
+:101FF00036C9F83E6D0B127D2E16F391F84C1E4734
+:10200000E2B30FF189F6D22B5348EF851E5491624B
+:10201000D98BDD9FD2BE7CDAA12BDF998ACF3781A5
+:10202000DDA2A39E1DF5B36FA39E5BA3528C7AFE27
+:10203000A1E22C96A4AF71FF39FFF53969A6043DE2
+:10204000A93EC8F1A43AE7A42DA4F7CF7E1DE9EB81
+:1020500084EECBAA4878EFF1C2FEB88361BDEA37BF
+:10206000FD210DC769586FA679C975E9C379A07CB0
+:102070006B4F8D20FDF7E5C5A95FB94EFDF48DEBE3
+:1020800020E909DEFBAF429718274CF2E85451B023
+:10209000CA37049D2C7A00C6C5FEB638E9FED2F3D5
+:1020A0001D57E2A37FBD055F531DD7714711F9D1BD
+:1020B0004D6F6874C8E044FB5505C8C7F5A02FD024
+:1020C0006F51AFC4DFA17B640F59E91EE6FA4DB72B
+:1020D000DC8CE3D51FB79AB0FDD4E1AB26125C4986
+:1020E000EB0A782A188ADEFB8AE205BE04FC813DF1
+:1020F00041FC2DE7930037C101FB29BA8FA8AF0837
+:10210000D633410EBC59C8ED2E78DF6521FAE6F7CB
+:1021100061F5CFD795345F57D27CDF6444DFCC17AD
+:10212000A4F92C78DB6AC2E70BEEBFB604F73DA733
+:10213000D64DA7799DCAF04F44FE3A5500FD0F21B8
+:102140002F17DC0FF32CFB0BF36CB7D37A0D3BCFBF
+:102150008CF80EF617E6F989A04339CFF7343D0D18
+:10216000F3F943CFAA0CFD2EA1FCC0C6A9BC4EBFFB
+:10217000131732737A086D4AA57CDFDE6EFEFB040E
+:10218000520EC078E7490F26A28753D5FAE6C9D088
+:10219000DFFF073F3717B700800000001F8B0800E4
+:1021A0000000000000FFCD7D0B7854D5B5FF3E73D5
+:1021B00066269364924C12088140983C09908449A9
+:1021C00002888A767804D1020D4F798993071042EC
+:1021D0005EA0B5696BCD4002A2450D352A5AD401E7
+:1021E00081A2A20D0A0A15BC032A6245C5578BB607
+:1021F000E526405179C6A05EAEB5D7FFFAAD7D4E5B
+:1022000072CE9054DBDEFB7DFF7C1FDF669FFD5AA4
+:102210007BEDB5D75EAFBDE7C23DAACBEF16E2E4DA
+:10222000DD056FFFBC17A5F7AA2E81FC58DFCD0294
+:10223000F98FC32CFE144A938BA670FE659B6BA589
+:1022400022C489A6BFFD41A1FC857D36B7A0F20B53
+:102250002945F7CE467E8FEA5A41ED2F0C689F251F
+:102260008673B9D844E5EA5D239A502E1E1EE6CA4D
+:10227000A0F2F20D61426409FEFB56687F23E93B40
+:10228000520BA56B556F7834A54D2FFD44C9A56F32
+:1022900056378F57F3AB24F7DD347EB95558EDF937
+:1022A000A8DC9E392D4788F37B6D1303D9323F2379
+:1022B00087CB3FB052798D5DF85AF87BAD7D6A0EC1
+:1022C0008FE2B6D2388BA90F914AE9FA18EF60EA8B
+:1022D0007F318D9342E37D8BBF1F5C0EDF0ECBE71A
+:1022E0000B8AA89F7B6D62F673D95DF5F434DB4DE4
+:1022F0001DF6466D7B573B558825C63CE1A122243F
+:10230000BF14794757BE32A4BC2AA47C47BFCFA7CD
+:1023100014392F1F7F03C61FD185C7120D8F3B2C89
+:10232000F41DEB728F12D844FF2DB1BAEDCB09FE2C
+:10233000E7C6889BD14FA95538AECD47BD0E9E5FED
+:1023400089553486E5E3BB87EBE9F3A6FE1AC3E2C1
+:10235000281FD1CEE353BD8976439EDA9BE09AAB2A
+:10236000C1A3A74BB785BB4EEAF3A07F552DB1A6FD
+:102370007CCDEEBEAE93067C2FC57FFAD2BF49342A
+:10238000FB91C08BFCABDADD7A3092E8A74DF1CD42
+:102390007553BF170E7E1D9DEDE6751F5944EB9BCF
+:1023A000AFA63E7F98E6DBBE47F56C42BF6FD8FD17
+:1023B0004A0CFDE79B8B0F6EA7EFD52FA789BBDDDE
+:1023C0005DF30FC5E385DD17A353E9FBF943F60879
+:1023D000318CE6B9377EAC9DE862475C7BB778AF5D
+:1023E000D5D65DEFEFBCB5357AAAA1DE79D11A3D1D
+:1023F000CD402F25BB2FD68B5CC69F5FCDEFC2EFA4
+:10240000897DBDC7AAF4BDF4F7FDC65A28BD5FC3D8
+:10241000DBBD36F7136B096EFF9E30CF1682FBFCD7
+:102420001BB32D687FFE8D722DBDCDCBE95F4F2490
+:1024300063FC688BA4777DBC356E0BF7536A697BB0
+:10244000EC1ADA8FA5BFEB93D290D2555E6AC9CF52
+:10245000C43A6FB7B52F00DCE715B14689EBEAE760
+:102460007EB79BDB9FDFF3C963E00F27EE1D904F24
+:10247000644DF941B93E2A3FFF5141A68BFA3D7F99
+:102480004F5F0FF8C2769BFB36A6B7BBA23CD8F7CE
+:102490007A7F18A716FDEFB962A40FE947125ECA4A
+:1024A000E7FAE4B87E25BFABDF688BFBBED1E0174F
+:1024B000BFB779B650B2FCEF697D62313FECE76E91
+:1024C000D6A1744D98709BF8C94A86BB4478EC221B
+:1024D0004D960B03BD958922FEBEB0C9FC7D11F15E
+:1024E000097C5FBCDEFCBD5C34AD6EA5F92D09989E
+:1024F000BF0BDA3FFE04EC6BFDAFC55E14057AFF3F
+:1025000036CC544FF835FE401F095F25B41FC1C7B4
+:102510009E5102819558DFBB549E67E8BCDE75A7CB
+:1025200070BB8722FF6741AB615D8F5B843591F0A3
+:102530007ADC2E1C89F9E8470885FAF5EF0B0B6C5D
+:10254000A126770FFE2AB9047CAF31C22208BE5BF8
+:102550005DE07C42ACD8F74932FA295D53E86D352D
+:10256000C077C1E67DE8E7D4BEFD5DE2D754EFF861
+:10257000D840D35882EBF8DDAAA7A11BB84EAFB163
+:10258000884001E1E32E2102F1947FF293E4625A44
+:1025900097CFB67C925C62A47F45CC36D2A39E12C4
+:1025A00024BC3EEF61EFD2FC8ED35C309FD07A5DCD
+:1025B000EB6B8657C767B82A6ABBA387CF40F7542F
+:1025C0009EF5775578B1EFF7D902A0CFC88D5F3C63
+:1025D000380FF4B9D7E64AA1B16BF6A95E95E62D9E
+:1025E000F6A8810C9C637B4F4457E09CD953E05282
+:1025F0000DF3AED9A316E17C39BFFB62426936F711
+:1026000033C5ED44FB073CA0DF9EE0F89B5BFDF784
+:10261000F89FD7CCFFCE657F907003F8C0C6539962
+:10262000E0EFC407FFE6A6799ECFFCC68EBC10ADD6
+:1026300023417F045FB49BE0BC10F82A5A105C8EE3
+:10264000BDAA37D0CD3A44A5D8194FFF327C130923
+:10265000BE842EF8089EA894115D7056BBDBED3841
+:10266000672F38A273C14F694293F212B4F3C90DB8
+:10267000FE5A3A49107F1DBF67E1CA70C80B4D8AE8
+:10268000278CBE97ED55F9DC2ADB1B19C016183FC5
+:10269000C8C9F9D247D54018E527A8A3FF309BEA5F
+:1026A0002FBE47F5D08E14FB37DEF6071BD6758399
+:1026B0004DA01C88035C4B34B896ECFDE1670A8D95
+:1026C000B378DF2D0730CEE207140F17A8F3EDE83B
+:1026D00077C9438A88574067B6E3463A5BD864CEE9
+:1026E0002F12AD0B5415FCC1FC9DF09E5C41FD9674
+:1026F000EF0E73DD8DF102A1E542BC4AF0D468FF14
+:10270000CFCA583BF700D5CFDA68673C9C0F17E279
+:1027100008F6ABB53541200DB626631DCFEFF96B3A
+:1027200032D6B1E677FF9529BA59BFCEFDB437AAA4
+:10273000D7A94821AE4E51C4B7A9A0FB8B538ABA82
+:10274000A96F1B20F7C5369BBF9F87CA0F6CFC8AF9
+:10275000F9C1853DBE81AE6EE8B76BBFFAC32D8966
+:102760004883E102E9F016D70DD827240F62BE3561
+:102770009B564FDB44F9F0976C38B9444D8693F77C
+:102780000BF6C74243BFFA3ED906BE807484E40FFD
+:10279000B601F21C3DAA9D7BDBF6774CC9E8069E8C
+:1027A000A36E1BD7B30D105CEF5977D15CD05B845F
+:1027B000C51F0DBE2DBC5E772FC2B3A2D157435D9E
+:1027C000AD82EF89A289D3FEA285D34785F0395126
+:1027D0005F785CC0B3100362813FDEF38CCFBECC68
+:1027E000377FACAD217835E8C41F2B025BE8FFEAE8
+:1027F0004687506320EDB546A35154CEB4FB065234
+:10280000B9ED03D5A240DE1DA0AFA7C785FDF7A592
+:1028100073468C71FDF61F2E9988FEAA76A9228C2C
+:10282000FA3BB7D326824ED4A7FD027C1CFEC29E83
+:1028300002BEB4571190976B288FEF35A3ADDE80A1
+:10284000012F77A4D8180FD52999F29CB67A0F4D8D
+:10285000A27ECFBB4AEC90EB6D87CB26E2BCB125C4
+:1028600096D801D7FEC3631D2958B7582BEF9BD5C7
+:102870007BF5718FB8D07F54EC070C6F63B645447D
+:1028800053BBC6A3610146A643F2A1300DAF8DC173
+:10289000F10E7737EBE317E393C4282ADFA94E0440
+:1028A0009CE75C252EACA32D96E8EE0A6A6FF34EEA
+:1028B000BC9AFA0D8B8D8B077C6B52D2783DBF8A08
+:1028C000AD6538BF22F1C2CFFBB7B608F9C6FE65C9
+:1028D0002AE3BEE921DECF350E397ED43E95CF51B5
+:1028E00071A543E3DBEFBB4A699C05C9BE47410FB5
+:1028F0009DFC6DC4AB02FC39CB6261F9ACF135E7EC
+:102900005AF021BDFC6C8AA4377D3D56F5B2BAC0A1
+:102910003F1ED5E87395ABC8916F98A7ADB745C377
+:1029200057910378DA612F3A84F3A59DBEE3DC3C2E
+:102930009038CD013D85EA59D0CFA97ADA3176F4C5
+:102940003BC301FC2EEA553201ED168BDAD5D86F68
+:102950008BD7AB2268E0AB8D3639EEA24B11221833
+:10296000DF35EE225A3F6E7F295A04E9DC6D0C9761
+:10297000F51AA3E4FE792345EE9F0FB5F9B469F982
+:102980007F99AF7BCC7CFD5CEC1FB69648FEFE4683
+:102990000AF55BA5B44E48A1F9AD4EECB003BFA754
+:1029A000EA5D22986980F7B279C68BA061DCCE7AA5
+:1029B000971C3C9FAEF57033FC5DF375321E4ED50F
+:1029C00027321E7BEE3FC984C7AEFE534D78BCBC98
+:1029D000FF4C1EFF547DD677F43FB487FEDD26F80A
+:1029E000BBFA4DE771C56EDF40F0973B5DC40F98B1
+:1029F0006E885F50B95DF13D7E35E4DB8FC204E443
+:102A0000BEAFC27D835C06FEF00DCE65D6E782497F
+:102A1000E0B77ED1CC69CDEE8B13D0DE4D7C01FBCF
+:102A2000492FAF11ED0C27F885E88335B4BAB97C8E
+:102A3000B76F10F4221D8E4E79E675A7DF42FB209A
+:102A40006CDFDFA3B18F2F58DBA778286DD9AB4699
+:102A50001AF7757CAAA4A7B103BEC86DA5EFD56807
+:102A6000477CEFB697970E027EAAC3DA7301F7810F
+:102A700097FF968B73E4AB7D4B07E2FB36AACFF250
+:102A800087BDBDDA63E82F5DB8FC96515DA933556B
+:102A9000EEFFD0EFDBF635F4031CDB89BD09920BAA
+:102AA000ABEB2A0A4EC6830D79EF07FF12C4B75865
+:102AB0001FDA3D5D1D03F9EE439279283F7C8F9428
+:102AC0001B860F10014B0AE4BE0F67834F548FB073
+:102AD000BBA00A47E41D61793B6284C3A550FDBFDA
+:102AE000F797E3DB212FA4A17D613CE8F9CA64F1EB
+:102AF000EFC96D1B42F64FF0BDEAED345E95DA3A50
+:102B0000659CC2FB283F157CFBAD2FDED6F4D704B5
+:102B1000ACCF019C6B04CFFB5A3F65A9BE2B50CFB5
+:102B2000E768BDE70AAA377356DF64E847C59A7EAF
+:102B300026261152AE647E94033BC8E5E7B6D483E3
+:102B40005E527C3EE0C1DFD7E1C1F935344938FA45
+:102B5000125E456220751A8D3B21D5A2DB0F14C091
+:102B60003D449BE333FD5A96C7F2391988031DFD96
+:102B7000B3E34E4BF54E06FC7AFD0F67CDCBF175F6
+:102B8000736EE8F2BCDDDEB20C70B65739597FFCCB
+:102B90000045D4EE89596141351A7A8A730DF4F9EA
+:102BA000A3910B0EF6267C8C8FF2CD43FFB36FBC46
+:102BB0007E35F2CA8178F772D07371EB48D6EFC2D6
+:102BC0007D37A3BCD2E11B9840533C37C037280661
+:102BD000877C51BC5C27519453D42DFC129E6245D6
+:102BE0008EDF18E52B473FC596238F5D816FD62377
+:102BF0006C6F108DBDB99F737651DE9DFCAFE3E124
+:102C000098368FFD3671ED259ADFFE75319E06826E
+:102C1000B7ECCE1B17D450BAD0529410544D70DF7D
+:102C2000964A5D57FA8B07F62579EE9C4D83BB4E8D
+:102C300083DBEACA34EEE750B81B7479E5170AEB78
+:102C400083FC47F917FDB181BB291F66B9F8C17430
+:102C50009C5B3916B6936C88A0BD457AE43B1A9C00
+:102C60008FD2BE73C4F1F735F89E1821DB273E687A
+:102C700009C07E5034760FAFD313D54E8F4A6315FB
+:102C80000BB71D7250A9F0B2FEFCD7317FDBD74ADB
+:102C9000F36A4EF5DD07BCDD1C6F49FE80E1F00DE7
+:102CA0009D0A796BB49CC73F9037791ED384CBC6FD
+:102CB0004299586B81FC31CD25A7B25091FB63BA84
+:102CC000F0DA30DE4CE1E37AEF9DB77BA14FBC0731
+:102CD0005D88E0BE51F8F9FB1C11E0749E0872FD9E
+:102CE0009B442BE7757C137DDCDC4BD2C7277D54DE
+:102CF000C6FF56C0FD6E64EE803A9AC7D48706655B
+:102D0000B07ED5DC9BF1F35D704FD5E886F6EF6FB2
+:102D1000B18ED8BF33A89F693784ECDFF1BDF5F5DC
+:102D2000CCF847FBE84847A7FEE4EC4B78B84E5B8D
+:102D3000D2EBBC4B597F12C2C5F2D18FB47D5BA8D8
+:102D40003A452F5A9F236ED297089689639625623B
+:102D5000BEAFAF106F15D03ABE3E46150D5CD3CB5B
+:102D6000EDA668FD4DE93FE133D85B0F8B60AFE125
+:102D7000D4AEF092EFD518827B8ABABD3196CA27BD
+:102D8000F627BDC6C0EFAEEFB5C30AFDEE8674F3FD
+:102D9000F749D966FD67B2685231FE94E1E67AFBE5
+:102DA0008127A2B3F753A5FE22868821DFF27A0B92
+:102DB0008B713E1D932EDA2F101C1169BE8FB12E20
+:102DC000CB27FF7501C61556399FEAB755B6EB1DDF
+:102DD00027798B28509CACA7932253CA25C87F4AD9
+:102DE000F203D2D3F56E4ECFD2798FF2F3F51ECE29
+:102DF00017A4159D40BF256B3EB7627DEE0C97F87A
+:102E00002E6F699A00B02A76B71C445A162C9A8005
+:102E10006376D1A1DA8348EFECD4DB6A59BED3E103
+:102E2000BE45A3D35BA2A6FD3087D6E1963DAA8717
+:102E3000F303A64D9FDC0B791BE77BA2A3AA4B44AF
+:102E400033245754ABDE2F0197776FDBC1789ADFBD
+:102E500027F5A318EECFEABD0CF799FA899C4E4AE4
+:102E60002BFA1BE8CC2B3E67796CF2F6366B12D549
+:102E70002FF42A5EECDB6BBD2210A0FDB7DE26CF5F
+:102E800081F5740E601F8FC999F6E8AD027CDA6790
+:102E90004BA37166DEB0A410E34C19556C45BD1B05
+:102EA000BF211920A58B4EBF8BEEF5F95769EB7644
+:102EB000EE6585F1D8B1332D0672C1F25D697D9062
+:102EC00012BFD4F5DD48E0ADE39285E1EC381AC1DC
+:102ED000FA86DE6EF9AE48E63BCB07D803C260B790
+:102EE0003C43EB2C0CF2E699677EE2369E2B67E2C0
+:102EF0005ABEFA18FCED2F92BF916473EA11F0BF2D
+:102F0000FEFD3CA093F39A9C4D7A4624CEBF6ACD39
+:102F1000AE08FE84FC990869CF1DF96CD258EC2FDD
+:102F20008C471C4EE8FC2BF3D987527FEEEE1A6FCC
+:102F30005BCBC28F1FA1FCB980C56FA3F3E99C686E
+:102F400039FF3BF0DFCD4EB6EBDDA9103C387FB743
+:102F5000F4E37C96628DA8C3F92B02BCBFB314B70F
+:102F6000B58EF855E5730FF703FDBD44381845E5F8
+:102F70002FAD8B647EF692CD73AC0EFD3D2AFBFB2C
+:102F8000CDBD3F3DBE1BE93D55F93FC5F2A4C5315E
+:102F9000FECB7EB56408DAD3F92EFA527F4FBFA874
+:102FA00004C3693FE734EF5FD997E01BB6A1CDD2E8
+:102FB0008FD2BCCD4A03D2A1036E3804BBF30D6996
+:102FC0006E6E5FB03D454DC236EC17F8F8077CEEEB
+:102FD0009BE581ECE6CFC7F6135D72C110A5E5F461
+:102FE0004682352CF968BE8FF1D7C4F3D9B577FA8C
+:102FF000FBF304E6411207E02EB67BF81C0AF83713
+:10300000623DCFF9B23CACD715F91F069D9DF32563
+:1030100078702EBD407AFC55A87FCCCAF37C71F342
+:10302000BBD1B0EBC4907E1C0E7F485EFB04D4AFD6
+:103030001AE0167E6A3FE0B1EB26023FD53B776D82
+:10304000E47E2A1D1EE8B9E5BB2E1E4C829C78BD8D
+:10305000F064800E77CAFC2FC77B3D2A4DB57CE318
+:1030600097327FA488F345A4755A51BF54CA470FBD
+:1030700069E79F68CD65FEC8A4EDEE5AAF5F523197
+:10308000CAD7A7F8FBC2AEAD9F9B74DE55A561AB56
+:10309000D865FB2363E725335EBEE77967D7CE2D7E
+:1030A000BDBF87ECC21F4EFDC06C033BFA06BB3CA4
+:1030B000A7B7107F01BDE8E7348DFB0BEC5F6AEF2B
+:1030C000053F4D52959C9D848FA487C258CEF8BE73
+:1030D000E3CF8E59CDE7B62E67D544483EC8670585
+:1030E000B55F18E5BB0BF35BA89DF3C2EACE861C67
+:1030F0003223CA7B37BE573ADA9331073A3FEF455E
+:10310000BE5A25B92BCD207739E3BED7F95917E53B
+:103110006DC67CBE6FFDB19104670C525DCF22ADD0
+:10312000A35B7E9CBABD05FCF88130C98FA30A98C9
+:103130001FE9F30BEDFF15DAF73EE233AFD179E289
+:1031400023DC8F738EB1F27ABE6AA93C48E770A186
+:103150001C01846C8D1DCE796F14E16FBC5315BEBC
+:103160006EF4453DA5F57A1EF899D02BD254AFB038
+:1031700057AC1DFBF7FBCE5BD5D6478DD0F9A9BB6D
+:10318000977076376F39CF5BC247F4015EC62ADF8E
+:103190006FBE0E5BD141ACC338671E9F8BE39C535F
+:1031A0008FF904C37F18DF43E7193A1FE1F87EF275
+:1031B000D28F15E1B760FF7D6E67FBDA5E5BEBD304
+:1031C000BF257CEE5D92ED819DE805F05EF0CF6855
+:1031D0003BCBB37BA3841F7C65EFD48400EC452FED
+:1031E000414F04DFE82D6479B8ACBF770E95537F6B
+:1031F000FDC2685FC05E342F42EB9F0646FB157D23
+:10320000B87D8352FB660EDAAF8864BE733420F952
+:1032100078736C709E4ADF9B3FCF14A8775404D616
+:10322000A4A2DEEDD25F43E54935D46FF3922112BB
+:10323000CEFF51F9DC68CEF3F68D73321F67FB4C7D
+:10324000F3546F5FF8AF7A69EBD5BC5196F7833DC5
+:1032500014E52994A7F4639BAC3F57ABF7914697CD
+:10326000B4CF990FF8A6445A41E7FDD24BC2D29988
+:103270002979FBC2EFF3485906DB28E7565C9FC269
+:10328000F4A3D9CB666B7C5BEF0F0D1C23212FCBF6
+:10329000BF390BB784839E679687B741EE3B5ABE12
+:1032A000320A7AFB4C9F1A0C835C39A3D0DB29AF1E
+:1032B000A5625CAF1CB74CD7FF82A5C0EBCBED0E6F
+:1032C0007137CBF7C102A33EA5AF6F55CB9878A35A
+:1032D000DE5C6127FE42F02CD1F66D9AD3D73B7DA0
+:1032E00004F4E9EBE38DFAF4A7650FE4F2FED2C62D
+:1032F0003B5BEF8D3F990EB96D22A7FA789D7A0F4F
+:10330000D64DE757A097DB25BD086BFB478B29DF20
+:10331000307B8807F6EA89D31C4C6F1D2DE12C1FEA
+:1033200037CC8EF0C26ED7B02B8CED06376BFB839B
+:10333000F428A61BFFBE28EEA7D22EF395CF65304A
+:10334000DDBC600F3CB915E52F87B37FB6325A8ECE
+:103350005BF9BB248D2EBD29AB7AB15F8EE9A53216
+:10336000C21DC3E5BF8F677A7A36DC57007C127DB9
+:10337000B25DBCD21ECC8C25FC1FD3E80F7A23FB98
+:10338000F56AA3986E8596F7FD3C9EF538927F7995
+:103390003CDF7D4339EFB37BFB2EC43E5A1EC9F0A0
+:1033A0001C73C9F26395B1BC0FE6DFB7F430FCC5FE
+:1033B000C78AECBC5F8EED5559DEFA739D1A849F67
+:1033C0005BA7CF9A25C7DF86F9A8BAE1A3E4DDD4CD
+:1033D000CFFC955593D06E7EC5ED5370DEF69AF610
+:1033E00029FB6943F7F3FC4AB37FD497EE9D8CF930
+:1033F000D56407761CA47E1E9C736A11D6D39FEEFB
+:103400009B86F53E6F6F7DE14F0477EB8A3FB25E9E
+:10341000747DB46F26BE5FD8F31BAE5FBDF2BF16DE
+:1034200041CEAFB64A7AD1CFE31A8D7E45866F1E64
+:10343000EA57AE7C9DF581C8EC23927FDEFEFDF855
+:10344000CEE9BD5B5E50A8DDD288BDD59CAA815C6B
+:103450009C6B679460B492067C4A3DEDAC2B188D52
+:1034600075F159A49CB8745B881F184B91A0D97F43
+:10347000A8DDD21619BF42F2821DF4195A7F297DA8
+:10348000E77ADFF37B856891DF6377DF7BB55CF7F5
+:10349000607038FCAE199BB0EEE776FD26D3E87776
+:1034A0000D4D2F8757CEFFACB65FCEEAFB65B6BD9C
+:1034B000D35E00B9EBFC337D4C7476FEC9C19C3FF2
+:1034C000ADB42B114A977F57785A46727C8DB765F9
+:1034D00024E4E707B5EF4BE35B4682AFE97C4E3867
+:1034E0005A7259FFCF6AC985BEABF34751D492C90E
+:1034F000DF032D9968FF8245DA53F88FE0A8783A08
+:1035000069E3DDD20FE1B70C477EE826E4F5711AD6
+:10351000C2251FE969BE8FA54B3BE6F939F69BBD75
+:10352000547FD07ABBA97C70C09CDF9A2EEDE70354
+:1035300043E26FFAA9EDFBC3708E3C21BAF5D73F89
+:10354000A38DF3D4539D713CAAA6CF0AB74E1F6E2C
+:1035500029DFDB80EF8F3AF17D6B12F1E5A59863EF
+:103560002ACF5F9E674F49FBCD0B79BE249C17E79E
+:10357000811782FF8558CA6743BE9278D5F33A3ED9
+:1035800043E7BFF2A34549B0DF7E94AEDBF93C7D53
+:1035900040973ADE1A6CA4EF64433F2E2F386985BA
+:1035A000DEEC492CB31AECDAEBF31CD8578B37E47A
+:1035B000398C74D6B0ADE010491CE2EC36AB072074
+:1035C000375803F7427E6FD8A6B6F805973BBC5430
+:1035D000FFACF3C0DBA8B768436C3EE46DBDFDE211
+:1035E000F52312CB0C700EDD665E879C16737ED8B9
+:1035F0006E73FE04CE80DEFF7CBBBCA0395F70C85A
+:103600009CFFE4835B67819CCB55FFBD2AF4893F17
+:103610004D3884F3F1D3175E8CC6FA2CFD4BD9419B
+:10362000E849A17122B46E0AF408FF5685E9E3B2B5
+:1036300078911EF8811E0F819D61A4930AE13F6875
+:103640004DB9BCFE19D132CB4B745559B7BCE064AF
+:103650004157BF57B6ACB343CE0B1DB7A7FD2F9C48
+:103660005E37EC6AC5A364D9557563C509F82DD6D4
+:10367000BE3B01F457FC4B85E58AE2E707BD0ABE75
+:10368000DFB663CE0D9CCE9AC8F8D0ED7D8BF72ABD
+:10369000C128CABB4649BA5DB85E617DBDA4D11CD4
+:1036A0004757B63624DEA6D95CBE78F7FEFF869F64
+:1036B000BEDCF118C7335C1E271878057A5BC5A7F6
+:1036C00082ED3D159BBF0D3397CB792DD4E7E1BF3C
+:1036D00096E3E1AE92553ACFB793C8D0F9F04B5785
+:1036E000516A06E1FDAAE68DAA949BBDC5EC9775CB
+:1036F000DA39CEB0CA21829104CFA128BBD745DFE9
+:103700002FAE8F6279615118C99FF99C8A708E43E0
+:10371000F4C4A0DDA977549683AAE2251EAA1E57F9
+:1037200002B0C556C1488AFC1332BF04DE2655D20A
+:103730008FD7003FD6CD98174D526FABB406F70325
+:103740002F9DE7C03673BD4A9AE7D138C859E6EFD6
+:10375000D5A29DEBD7ECFE36CCF8DD60DF657D525F
+:10376000D76B55C83304A77A4704CBB3C49823401A
+:1037700057AB14EFC30E15299DE3A0EF254E962FEE
+:10378000E66E94E747338C839083D70D66B967AEB6
+:10379000E2CD04BEC4BA70D6A7A9DC1FDE8BE564F7
+:1037A0009643484E6639AA7D8E9DE3129BF35A825A
+:1037B00090C79A1F48F1D00A327FE4F3E89E7096D2
+:1037C0007B9AA74AB9A7795D1F6EFF3140EB0B3991
+:1037D0005AE2B9F99E1C1EB79F2ADB893E520F2080
+:1037E000B93A137A02C1E541B92E4767C5FA4AB022
+:1037F000EEFAFC9B63DBA3E0C712E5F1DF4B6ED86A
+:10380000A29D87EDEBC203F0539C548A0E5A0CF62E
+:10381000A95B32E4F93172AC77AB568FFD1965962E
+:10382000A977FF80E0297BD0E26E48E95A07E1F5ED
+:103830006662FE27D785E783EE468E95F6A7637905
+:10384000929F470E171CBF73BBD6EFED1916539A04
+:103850001841F448FD9C2C94F6EDA8E1456C07A4B2
+:1038600035BAB9BB38903519F29C2AB317FDFE9AC8
+:103870006EE0E9A48BF152DE3DB94CD924E1F2723D
+:10388000BCDFC85F85B3FDF0A476DEE8EB4174349D
+:1038900082CF718D9FADD3E8665DCF7463A28BB983
+:1038A00090B7413773E4B9D84957DAFA12DDF07AA4
+:1038B000B7135D48BA11E26BB42F744B793B44DF08
+:1038C000EAD4B77BD0B7880E9EC8E86DA817420728
+:1038D000C21A18F18FFC2C25A362472AB40449565A
+:1038E000E147DC2CCE46C6D75DD6C04A82A7BF557D
+:1038F000AECB00ABA43B3A65FC11F95CDF8BF8D989
+:10390000E2FB170B2FD52F4E126CB74A27F926264C
+:103910008EDB09A47007AAB0E7508AF6C531B2FF62
+:1039200062A26FC4B3517F5E4B9CC6DC46C27F2A45
+:10393000587E40FBE87C6EEFB7C8F65E2BA503D33C
+:10394000E43E6A5F15C6F82BBE734026E864D25881
+:10395000339D24664A39414F1B33DDBADC90087E23
+:1039600050D23898CF9986F0A2AA5DD8A7CF487DCB
+:10397000A378F54D934700BE67E33DD8C2A7A7ECF7
+:1039800060FF4A49E39C1F7F083D655B387FDF98F5
+:10399000E97B0F783FADB817ECA20F25335FB12755
+:1039A000527B5FCBD473BFA3748A7FC7DB9023A6FF
+:1039B000CC50B9FE1421EDB9A2518E33D9FFB935DF
+:1039C00091FA9B3C5AE1F094B67057F232F855B434
+:1039D000F53DA6D17743B898FD9C13700DC84CCD2A
+:1039E000861F8224D46EE4E401995AFD31CA06C8C8
+:1039F0004303C7C9FDA7D7473FE8372D53EEB7CFDD
+:103A0000B47DA7E709AF5CBF6C4D585B5A34525B7D
+:103A10007010A5F3B2C69E039F99942A26AC07DEC8
+:103A20007FAA8A4D0C6F7B31F385A84C37F8828FC3
+:103A30001459A6FB6D8399EEDBC6B4B7DD49F9B620
+:103A40002D39D27EA7E9F30B5D82E582B63192EF84
+:103A5000B56F8964FE73CCD51A1527ED5DACDF9781
+:103A60006A24F1D7BA867BE1372E75DADB707E2CBB
+:103A70007C603AFBFB4B9B49BF475CFD5AB37E4FD2
+:103A80007A78586637FA7AA85E0E9A011D95AD5578
+:103A9000980E073678EC7D99CF292ECCAFCC194CF7
+:103AA00007FF2FF384735CF0657AFB3784F791B0DE
+:103AB0001F0B0EBA1A3AC8D70BE3163715B37E1A86
+:103AC00099ED63FE355025BC101DCFD4E86F12EC84
+:103AD000A0E04BD6D6BED897AF6568DFE35C994EC1
+:103AE000A6EB70BE6FD066736502BEB655E1169C3C
+:103AF000B793564AFAA67DE7C0BD80BBAC2202FC54
+:103B0000E0B8D67EFE0A6BD146CAF777086B541C24
+:103B1000E82B8FE93B90E5FB0CEBF7E92FC428C8B5
+:103B20000DA56BD749B834FA10D623E3E3699C4F4F
+:103B3000B7A4E4C3AEA0D353206B6C76E608035D54
+:103B4000CC50981E683E87609F9D9755928F72FA61
+:103B5000BE1FF432696C301D71D8856A25C7AB76FB
+:103B6000240A0FE2873A443BCB231D248F803FEA8F
+:103B70007C46E72744175E4742D77AEB7C656B3D6E
+:103B8000814678DE56EFE0F4A97A97B0124FD85EFE
+:103B90009FC8F967EBDD9CB6D467F1F7E7EA3D9C77
+:103BA000DF593F8AF32FD47B39BFBB7E22A7BFAB3F
+:103BB0002FE2EF841FE64B3ADFD1F9934E5F3A9F35
+:103BC0000AA5AB058466DC33A0F6CC0F753E887978
+:103BD00058F2BBF893BECEA94A913F11FC50B4CE27
+:103BE00001FF2854CF3EF322E1B9A3DCC9F1A11DA6
+:103BF00042F2C10EA783CF8D64BBD80DFB40C33208
+:103C00006FDB9D8673785EB922AC06BABDA9365CBF
+:103C1000580D747D735DAC293FBFEEFDD7FA50FFA0
+:103C20003F8BF12DC2FA1CBBE3D4A37FA4EF8FDF3F
+:103C3000713A03EB4E706C7908E3DE1EA1C1D12A04
+:103C4000E1BADDCEF2D2C008A94FE1CF6188732D71
+:103C50004E897DFB3704E7316D1D06DA5DB346C141
+:103C60002EB34A75ADA42A1F63BDE8FB9FB5F52AA4
+:103C7000A90B637C96346AFBD418FF4CF83CDE57E2
+:103C8000B05CA77885801FE9F82FEC419211C471D0
+:103C9000C51150681C8594ADF9B017AE79FD28E4C4
+:103CA00074A5EE10CBD53E8793E32884DF76D6D873
+:103CB0009F527790EB89D6FEA638C8C8E15E3BF8E4
+:103CC00005681BEB56927540609F8B2685EFF1943B
+:103CD00069DFCBD628A6F8E27B3355E68B8732AC7A
+:103CE0009C0ECA149A13A589CF299D5E897F703CCA
+:103CF0006359539E7D91812F9768DF4BB32CA67833
+:103D0000C74319322E6A109805A57767A5DA1732CE
+:103D1000DF7373DCBD5EBF242B7F75EA70F483E82C
+:103D2000A0AEF68F645AB9DDA10C9784C741E7595C
+:103D300014C7E9747B2EE872CCA7F8EF950C3FEB23
+:103D40005915CF3EFD2CFC7B157F0AE3F3A9629841
+:103D500066DFC80E8C9CCEF28FD7A98C84FC2DD741
+:103D60007FFCD37F89467C54CD4E6957A5B40D693D
+:103D7000F5EDE56C57ABF6D0FE88039F35FBCD5FC4
+:103D80007DF64FD1ADAC97F893B4F85B8EF7AADE11
+:103D90007982E3C0F4B8AFD07635CA37ACA7EA7100
+:103DA00001BA3FB6709F8DF74DCD1E85F5989A5D8F
+:103DB0001713C0E76AF6AD4AE82E2E27B45F3D5EC2
+:103DC00040B7BFD588B59FC37F4884C3F80FADFF08
+:103DD000766654AF53430562D5AE603B8855701C80
+:103DE000C7722D8EB32390C17EE19EE4ED9AF5C497
+:103DF000F049BFEDB0BA6310AF7C418889DDAD53A7
+:103E0000FC20797E9FA37D04BFF085ED2ACB91171E
+:103E1000B647F17EA8DE7EFF41C4DB556F56D88DD4
+:103E200057258E30DEAA77AAC261E00F35B00BC5E8
+:103E3000F70CE7D2A7A36A415F4B5A14EF16F8AD0F
+:103E40001DEE98DE0678DA35FA5A1AD63292D74540
+:103E500083FF14F89A41CE5CB2F77E8E13A47AE702
+:103E600059AEF96D24C7B3510F6F03CE331B0AD877
+:103E70004FBDA4654735CB05DB235D10694EDBCC18
+:103E8000F729BED1C6FB4693D3CEC04F82F6CFAA48
+:103E90002C0F034EECCBD35A3CABDECE3248B6B33C
+:103EA0006878FB0DF6E788AEFA4B5ADAA2D3A9FE82
+:103EB00027BBDFE7D43948EEE325CE23B938473FA7
+:103EC000D919C9F7ED3ED9F9EB092FD178E75AC6D0
+:103ED000F4520CFB6CE0201BD73FB741C601F32521
+:103EE00011D60F5A783E67B62729AC2703DF849F87
+:103EF000333B9F8FB6F03EF6FF7B71ABB3156BC8BB
+:103F00007D84EBB24780FE5BB5FB11ED9AFDE57F4A
+:103F1000A7FF6AED7B9B52A48D23EF3B083D0EC2A9
+:103F2000A5ED3BD5C9FB6E79949DEF2F2C18E6BE0D
+:103F3000711EF8E89B328E51F4773F04FD6FC13B50
+:103F4000F16C6F596E73F741FE8BC336F6132C2854
+:103F5000F01CF5A17E8C9DED4A22B17504ECAD6D8F
+:103F60002952BEA85C433B9350DC8FE8CD4FF8ACA0
+:103F70000C58848FF29307A5F2BA3E526EF1DAD94B
+:103F8000FF13E4FB92C7ECC28F7B2FFEE7A47E5D9C
+:103F9000992AFD0E8F607F515A1917CC8C87DD4E00
+:103FA000A39BCA69546EA09FCA4DC14CC84F67ED10
+:103FB000D21E8972E84D95F9B25E8346A7E807FDE7
+:103FC000B6A5B8CEB3BCBB2B4A40EFB0BC1825EDAC
+:103FD00021BF09DF146638AF6F1A24E9B841F3072F
+:103FE000FAB748F80017E4F825F6A64CC8B9FAB8AD
+:103FF0004BA29B78BCB3DA784B229AA4FF448BC7C0
+:10400000437D1EDF26D8BFD3FE6418CBCBA7FB1E93
+:104010007901E39F7E7230C711B4A50416EDE6F274
+:10402000708EE3AE782A2C08783F7B328AED589F59
+:10403000D9A41CF6595402CB6187A21E5C80FE3ABB
+:10404000368729E0A39F29C29E88F22DBD590EA86C
+:10405000A8AF633F4905B117C8AF944E84DCF7D9C8
+:1040600096C16C27FAEC0D952F29D0F735F8EE1391
+:104070004D0B7EC6F2BFF43F9E7EEA6F83BBF3AF6B
+:10408000546C36DBC3F4F5D7CBEF1824ED03770C73
+:10409000927AC9CA412EE97F8B6C793095E729F96C
+:1040A00003AD03EB7FB41F13606F3FD6B22741719E
+:1040B00002CFC1CC5F03EFDBA49E757ABB8DFD42BE
+:1040C000152F4679D9FE74E7157CEFB042957278CA
+:1040D0008545DEDBABD0EE99564467B27D8BF0CDE3
+:1040E0007A6DFB16551B478EFBD9D601D29F10D493
+:1040F000F22FE4F03DB84971E2E6692C5F6DC80526
+:104100005E2F6E8EE4F8791AC78BB8878A9FFD5CA4
+:10411000E2336611EB0774AE317FAED4F873D59DF0
+:1041200057C7E05E817847E5FB1217AD9E3EE0BFC2
+:10413000A1F87A4FE3634B5F7894F94125ED17C4FA
+:10414000592DD5FCCB4B9F52589E5CBAFAEA879802
+:10415000EFBE6D13B85F70B6E5FE68E37AECD5F894
+:1041600067577B0FD75F4AF565FB37A3199EAD36BE
+:104170000FE0095DC7EFDDFE29F55F6A5FD142F20E
+:1041800045EEE5F3BF288EDCF627F095EDE16C6790
+:10419000A3F5E77B46676C2D8B30FF33CF8433BFAD
+:1041A00039132BF7FD27749EFAED80E787F7B15D91
+:1041B000EDBDE902E7D0E280B95F1DAEFD1ADFAFC9
+:1041C0008AF7C4C04F5345EB81FE687D7EC4EDDFA6
+:1041D000B171FBD0F93C8E76230CFBF49948A69B79
+:1041E00033FDE4BA9C7976109F676DB192DE09DEEB
+:1041F00064E84B6762658A1B3EA0870A97A48733F1
+:10420000635AD81E7046D9C1699B4DB6ABA8D3FC82
+:10421000DA447F89A01FD026ECA98EB54720C7803D
+:10422000CF8FCCE73488FBCEA17673D029CEBFBE2A
+:1042300059F2DC8478053ECF7E1BF6E3B4F03D7383
+:104240009F264F566EBFDC4F8875AADCAEB03FEBA1
+:104250009276FE02EA5EBADD9FE872A95FF1226EF5
+:104260006B69E3B225A0FBA5B5EBE681EEF5792CF1
+:10427000D5EE5FB7292AC3D3164EFB27FBF2F174A4
+:10428000FCAA598A1E9F275CFAF9457B382CCB2D56
+:10429000E988B24DD45F65A3B296C749D1F55B39C1
+:1042A0003F1D4FB8CD02FB5E9B76DFB9A7F9EB70DF
+:1042B000F6044F5296E44F6D29F29E6FFB5BF2BEFF
+:1042C000F6C56F0A62E2FE813CC891FA7A7F047FEC
+:1042D000166810728FC6E796C2AE4E70666E30FBDF
+:1042E00073B2369BF343B69BF3D93BCDF9DCBDE605
+:1042F000BCE75573DE85717B77E109FA36E203A1ED
+:104300006F2385BEEDCE94FA36F2D0B79142DFC668
+:1043100077E8DBC843DF461EFA36F2D0B79142DFBA
+:10432000C6F7391A9E2A357B29D681E3D4F684EB69
+:10433000F100BC5F2ECC49603E2AAC521FBDB024B8
+:104340009BE5C74E3BD35407DB99F438A7B7A27C53
+:10435000E3B27AC37F7B6475DF146EC7F6E79ADF3A
+:1043600049FB73657EB813F68ED6559FAC86D8137D
+:1043700088F24D44FD0BB6F6ADC06F55DD2BEC6FEA
+:104380006F5DE17EE70772FDD8EEA2C72D15E3DC75
+:1043900003DF267D49C66F7B1C463B6AA85F48AC9D
+:1043A00035E4213F359BF3A17E20F035AF695F35C1
+:1043B000311D3C6E6BEF0BBE7FE24907DFF33AA184
+:1043C000D9EDC46C17CB63BA3CDF298FDDA36CC277
+:1043D000F9BD242B8EDB771CCA30DDD30B4D4B2F60
+:1043E000E5B3BCDA995FAB58304ED98C15FB59AFA9
+:1043F0004E8CE673E9160DB64190FF0D700F0E441A
+:1044000098E868E8B6B810BF653F53FD61BB5343F9
+:10441000FC96434CE5D3D71698EFB5175D6D2A1F70
+:1044200068EF8C877348FF96069F4BD6B9E8CCE7B8
+:10443000F986D64B563C7F84BF56BC25E5D3329ACD
+:1044400087B7407B9F231FFE39EF14E0AFBCC51632
+:104450008BF3BE543B87449DF95C2EB70ABF2BAE4D
+:104460008BEECA5DC21B4BEDBFB43625331DDD712B
+:10447000345925142D19722437087DE58D2746827D
+:10448000AEAAD48DC92E2ABF55096CC545ECD3718F
+:104490003B12AEA4F2FFB4F81EC9A2754AB605EFEE
+:1044A0009D0F3EBA234DE0BD91136B9F8FE6B83C44
+:1044B0008DFE926DAE08D0C1C62695F514D8CDD428
+:1044C000B82E3AD9D8141F01BDA67C8CE297727120
+:1044D000B449DF0BC547A19AFD8E9BE67BF1902A7C
+:1044E000EF406AF35CEE92F545BA6CAFDFB3D7E705
+:1044F0007B52D3472B36BE96790B7D3F3B787F2E80
+:10450000AE8457D6EFE6792FB56CDFDA97D27B1DF4
+:10451000BE5D98D7F2B7C6455F49E37CB95DC687F3
+:10452000FFB5F989C7FCC44FEF6C7AC20EFB418519
+:104530003560871E5CFEE4463BE218AEDBB691BFF9
+:104540002FDA56CCF600FDBEDAA77A7CB3868FF25E
+:10455000B1CA0617CDB3FF60C94FCA23641C4BA173
+:104560003AFA35DC13B8B84DC9C3BC6614EDB0E3F4
+:104570001EFF3B1ADF09DD371D87A717F686BDAB87
+:1045800045F120DFD33E9989CB72440FD32FB9393F
+:104590009D716908EBD51F0AD2BE708E6487E8D77B
+:1045A000875569CF433C12AD73B93DD86B3AE4856A
+:1045B00097E5FB0F55740E8DCA87DE2EC4559416F1
+:1045C0008D564D745E333ED2B40F660BC3BEA2FE51
+:1045D00066897EA6FC8C4969A6FA37CE181AE2676E
+:1045E000CEEF2A67FE7595E95D97AADBFD6E85E340
+:1045F0007BC69ABF537A3BD3D90DA6F655629AE98A
+:104600005D97259BDF653C1395D9A18F956BF7418D
+:1046100066FBDAB4EFADFC9D2662DAAF03D33C7FD4
+:1046200094E7A58DFD08BA1D7D36FE9FD6DD79196C
+:10463000D1198F89F85BD83B7C6679E408EBA942F5
+:10464000AE4395668FAACA92F6A82AFF113BE29B59
+:1046500009FFD62442497593C2F646AAEF488A93C9
+:10466000F9DBF17DA7F95E07FABB84F2436A31F604
+:1046700057687935CD1BE74235EC47B083E9FD6BD0
+:10468000FDEAF4197ACF3EB41FDF6037EFE78A6D99
+:104690003B0EF623BC4C2F8ACD437C4965CB545B43
+:1046A00071F6E574A6F3FD8BE516B67F751C7E8565
+:1046B000E9ACA3DCEA91F1DDFF181FD55E696F0D4F
+:1046C000A5BF45341FF89917ED543C0145D6035E4C
+:1046D000FA812E43F092D40DBE743C75E22DA47C79
+:1046E00031FE331CF1114A007CF232BCE878D4FA76
+:1046F0005FE4132C67123C018627A43F312A74FF24
+:10470000DDC2EF20746C50844BF96E3C4CBB24ED41
+:104710003603D3E4BCDB77291EC8EBB32E59F97BF3
+:1047200027BD14C938F51993CCFBB3937E8AE47E78
+:1047300099792981DBFD6FD3D177D18FEE9F098DD8
+:10474000FFD6EF5D2D1AACDD4B1A21467CFB4FC422
+:10475000AFEB72404FE749E779E3D2F0EF4CEDF66B
+:104760001C5E1E95CAF1DA3ECD8EA8F3639FD64E2D
+:104770001FB798CADD05A0EFFE09B017AF6E4C4B0E
+:1047800036BE17E35B65633B6FF28A784E8BC35D81
+:104790000938478A57C8774D8EDFD52701FE88E351
+:1047A000AB6CBD2651D7C77F3A3C59E4205FC8E9BE
+:1047B000897561B38D76783D6D1A2CED35FA397EA9
+:1047C000CE72387A36F6DFAA5DD108055ABAEAFD0C
+:1047D000912E3ACF57597C8F0F667FEF463ECF859B
+:1047E0006B632EEC70BA3C51B1AAB00FCEFDCAFF7C
+:1047F00079E5319CFBBE15B604C8A39F7DA00A8451
+:10480000CED079C672C4A7E192AE3FDD12C9F710CF
+:104810003F558417FEA625EAFE5C97E95CDD3B0B5D
+:10482000E3FFDE41E38EC0B881AD8918D7E3CFC482
+:10483000B8BE151931DDD957F4B466BD94F3B6EAA4
+:10484000F664CDEE0CF91E79C8F7706241BE471EC2
+:10485000F23D52C8F7F8BE4DF32F0C6C68CF837E43
+:10486000EA1F2BB26AF9BC7566417EBF4589F080AC
+:10487000FFDCA278FA70BCC166F9DEC4F29075D58F
+:10488000D36BDA490633D0ED0F2E3984316E6E8C3E
+:104890008835E5C739FA9AEA17BA524CE5D7250E9A
+:1048A00036955FEFCE33E57F9875A5A9FE64CF18E6
+:1048B00053FE47A3AE37D59FEA9D6ACA4F9F38C7BC
+:1048C000547F6651B1A9FCC6D94B4CE5737CCB4CE7
+:1048D000F979E53F35D5BFA97685A9DC2B5C569CD7
+:1048E000777BA17711DE5F86DE45E92D6F65388D18
+:1048F000EB3A7A9CA5DB77794E697250BFA1DE3620
+:10490000D025EED7800E0768F767BEC0B9D21B7EF0
+:10491000C9A022F5DE237D4137A1F542CB47471ED2
+:10492000B8E8A6352C7A2A7AA695F8C4E82B0E1496
+:10493000A4517EF5538533ADC45F465F7DE0F954E5
+:10494000CA373DB54A960F3B7011E5514FDF20F352
+:10495000D3058B1A8F0CF97A869FE631FA07A96B7B
+:104960003DD26ED26DBC69A73D88F080784DE001E4
+:104970006990E813E901A24FA4AF127D96A50B71CF
+:1049800090E813E921D23FF1FDF7A47F223D4CFAD4
+:1049900027D2B749FF447A84F44FA4EFD5CFE6F489
+:1049A000837A1FB7FB437D39A747EB6BF9FBC7F54C
+:1049B000759CFEB9DECFDF5D43743B4390ED31BAA9
+:1049C000FFAB1A7E47D8ED76DBCE1AFDC28A579E22
+:1049D000A7BABFB2A156B446629FB65A634F39BA5E
+:1049E000FC903DF35BAB386590BF5E0FF7260DE1A1
+:1049F000F1FBBB986F6BDF8F89E903F2699D0A5267
+:104A00007D29289F995FBA2A86F8C70FBEA9B5816C
+:104A10005E3EB4747F7FFB0B8D4EDA877833878CD4
+:104A2000E8F2BBEB7EEFCEF81A835F1EFE6C3D8E84
+:104A300047F7C7F39F213E47F793EBF141D76AEF62
+:104A400023E97E703DFE47EFB7F09260BE77CD1A46
+:104A50002BCB2D515611C4387A9CCF358E963CC441
+:104A60003B5C53E9E438B73EF41DEF23523D2FDEA3
+:104A700099DBFC25D5CFEDF2BBF7D1E641E53C8FC4
+:104A8000C24B3EB6D75EA3C51DA0BD4396F33B7592
+:104A9000881183FC4129DBE11E55A87D7E571C004F
+:104AA000EA47CAFA41F497FE158D17DDB58F06C4A3
+:104AB000B5E4216E6C40B593E3C6368C09F2BDB9FE
+:104AC000E9B1D7DED3AA224E38E6C7D8474FA7FAB6
+:104AD0006602CFEFEE730FF0507E5A5C5A6FA4530C
+:104AE00043DEB5EB667DE6625D757CE978D7D74B32
+:104AF000C7B7219E8AF1FC5DEB17BA6EA1EBA5AF9B
+:104B000053E1A52EFC037F97AF4FD7FAC13EFBFFC1
+:104B1000CBFA0CB7B6F07DCCB04A8707707DD77A58
+:104B2000DDDC2E26E03E78F125F741A44BD27C5FF8
+:104B3000807F968A31135CC0914BCD819D27B4DE76
+:104B4000F2EF59EFE1907A07E20AD67C9D7679BDC3
+:104B5000DD21F51A620BD67E2DED4C37E27C3DE46B
+:104B6000B6B11FEDCD703D1EC3EBCCA3751CA7F1F4
+:104B7000A343A296CF0F12D7FC58DFF1DA528FCBA6
+:104B80005ECC72EE78A7596E9CF04D5123C69DD035
+:104B90002B448ED6FCE13768FD5E279AB8DFD07BC8
+:104BA000F23768F269E83DF9E78668F2658A4801FC
+:104BB0009F1A2F3C122EEDBD83F12ED96F92462FF6
+:104BC000696E558C063D089F15CCF155BC77908BCE
+:104BD00071FD9CBF5E0438FDA108723F938991224C
+:104BE000FF23216CF29D03793FB35AF5FD27E42C96
+:104BF000FD5EE6C270DFABD877AF444E998FF728E1
+:104C0000C6158C4B47BB03E3DD2C9F1C70A4B1BCC5
+:104C1000847D658BEBDA7F6FD0F9926E95F7069104
+:104C2000E2DE603A6D96D7E9FC41FE86AC1502EDF6
+:104C300026B8CD71387AFB1FBAC60A6B41CFFCFD8E
+:104C400087B97BFAC3AEF366ECA0F1B083BF197BE2
+:104C5000C578CCF7CDD83E169986D939CD7931BDF6
+:104C60003B794EA7E7AEF126086B7CCF78D6F11AD8
+:104C70008A4F1DCFFF025E2F7487D72F060B29376F
+:104C8000474A3EA2E3B72AACF31E671F635C44A504
+:104C900043E2E933808C7BB87557F13C3EA917FDA0
+:104CA00081EF4575A3B83CD40E2536C7705E7FC72B
+:104CB000ECCC83EF4627127CD7397CEA50C2CBD9A3
+:104CC000FC60264930E2930D0D7CEFFADCB3AA07B5
+:104CD000F27FA5EA5EEB014F7953653FA0F8E695B8
+:104CE00064F809C5E6EEE3A32B1D12AFBAFEB3329A
+:104CF000AD88F7A7701524CAF7D5E43D725D1EE8AC
+:104D00001F26E38BF5FBCC3DC9072323241FEB1F94
+:104D100026F9AEBE9ED48EF349D4CF48E25349F76C
+:104D200045B03EB0DBE54D1A0A7FCA786192A7759F
+:104D3000BDBFA3977C3FF05A91F9D068CA8F3F64FA
+:104D400013012AEF182F4CF164856F94F2BB16FA09
+:104D5000FD98B044D2AF0CFC20DC1D617A6F343278
+:104D60002BCE948FF2F433D58F19956A2A8FF50ED6
+:104D70003195C74FCC37E57B175D65AADF67F658DD
+:104D800053BEAFEF0653FDA4F269A6BCCE9792E4E2
+:104D90002731A076AEA9FDC0BA1253FD147F85F964
+:104DA000FD54BFF74856029E77947F696B9687BC87
+:104DB000AF6A1196915DEF90FC3A5ADE0799E85C74
+:104DC000C4EF916434FDCC0C8FFA8D8A732629468A
+:104DD000E1F724AE739BF96061A2393FDE95F72AB3
+:104DE000966E9C2B34FE28A8809E926AADA6EFF3A7
+:104DF000866A7C3457E4B29EFE5DEBEF1B625AFF7D
+:104E0000507C5D4E0FCFE705DDD29E6F9C17ECF90D
+:104E100046BCC09E6FCCC39E6FAC0F7BBEB11CF670
+:104E20007C6379C121331D8C3862A6832B8E9AE96D
+:104E300040A7CFD0F5BAB2D54C1FC2A7F8947FB027
+:104E40005E577F6AA69FD0F521098BD76F825311D9
+:104E50008FA4FCFBEBB52E64BD3AD787F00DF9F6B5
+:104E6000DAE050BE275B78481578B7E4516D9ED7DD
+:104E70000DADE527C3B65B7DBFE67DAED155435F83
+:104E800049571D879E0F071F7D34A4FFD7FBF902EA
+:104E9000A83F3BFE62B21DF4D12EDF456B031FEE2F
+:104EA000DD15B7497ABABC77F23395E3188E599A73
+:104EB00014F0EB8218DF36F0CB9BB36B15F8671359
+:104EC00045D18E4588CBF98FB064E4170C94F77701
+:104ED00045762BDF7FD0F9E282241917D83254F3BC
+:104EE000F37A64DCCEF343A5DD24CAE3E238E3E2DF
+:104EF0006C79BF83D499E40539C0C7E1F041C0475C
+:104F0000B385DF696CB5B9396EC4FF862AE0F783D3
+:104F10001C0BF9728026DF357CE47000FE41EB85C6
+:104F2000E99C1D1C7098E25B876E7399F2392D899C
+:104F3000A6FAC376BB4DE579C12C5379C1218F29DF
+:104F40003FE2C82853FD2B8E7A4DF92B5B279AEA56
+:104F50005FFD6991299F24DA1F067E072A528F3E42
+:104F6000333455E2C92D387E6FC19DB1F2DEA7A65C
+:104F70005FEB72BA1EF7ECD3E83954DE1F68F771A5
+:104F80001C75435FE1E17B180E4D9F12663DC0A783
+:104F9000C52D77DEA3F09BE396F578E54E7D41D3F2
+:104FA0000F7439DD10AFEC35C62B2F08EBFE3DE05A
+:104FB000FFD2D63D14FE817639DF869FDAF9DE888E
+:104FC0000E57283C33B538DA2D8EEEEFF5D8B225E2
+:104FD0009D256514FD1DF4FE98CDD3CA6FDD5F36A7
+:104FE0009EA7D54FF4D5F00BBB67A5FBBBC75B30C5
+:104FF0004CCE67BEC572F3D46C8ECF32BD83DF3B1F
+:105000005BEAFD51B94AB7F35B1023E3A7448CDD9B
+:105010000DFAED793C89CF44BB68E4FB475A9CFF0D
+:105020004D6B5BEE194445F3ED4DDA7B60011BE8F7
+:1050300061D25892C3F284D8B66557B393E4A2C73D
+:10504000EAAC6C3FE9BFDD358B24B8CEFB1B0349CE
+:10505000EF017D40B681BEB42147E571AEC19E1B14
+:1050600081FDF64D679C3DFB0584D0CE0BA94F75A5
+:10507000436F4C87FA3CFEAFE3ED43F1A4EBAD4246
+:105080008B334CD7E0D2F1D76977D0F0A7DF7F70B0
+:105090002FB3156D72F23D8A8988DBD2D7AF2547D1
+:1050A000D265AD860FD4033FEAA95EA19A1D03FB2A
+:1050B000728770C7B8BAA1433DFDBFC28B8EFF9EF9
+:1050C000EE57F5C41F42F9C277DDB7EA894EFFD922
+:1050D0007B57063E21E368B47509A45BD83F7D6722
+:1050E00094793F6FCC96768D71DABEA2F3DD996725
+:1050F000E61702F6F18655AAC62FE4395E9C52C423
+:10510000EF118B3A17CB33E51A2FD6CFD7850FC8BF
+:10511000F7E0AEF516255C45F992669BD848A015D8
+:10512000FBBB8FF366BF931B71FE9E44C0CD263739
+:105130001AB7B44909EC4FB9FCBDECC54EF97E5C19
+:10514000E8BBD98B35FD172F2A60DF86FA65EECFD5
+:10515000D6CE6B8FF07C2BE167BDA50B7E8DDE027A
+:10516000F21D31E8C3AAB4F3709C968E3737FC2445
+:10517000F15D79C26F4416CEF3466BB771749DF83A
+:10518000D5FD2A9D7EC2C31CAF1F1A1770D6FF4AD9
+:1051900074777E1ADD7FD3D33EE8F4DF7C875FA887
+:1051A000C369891E053E04FFBFDBE857F9F3488257
+:1051B00090FD2731F08FB46AFD898DB9DDDD4FF4A4
+:1051C000ADD8C5F110AB2CBEFF405CF219EA1FEF61
+:1051D000B0DEE53C9080FBF89334BBD3E5F3D6E436
+:1051E000B0D1F27E40875FE5F5EE9828EF73131F8C
+:1051F00015D877BA1F7FAA08F642AAFB497C6B46EE
+:1052000031FE753F49717014C339B361B10D4F4818
+:10521000B63E7C7B6184BBCB7FD23A40C6E7F4E4E8
+:1052200047997EC9C3FDCDB87415F7732C3B45CAA9
+:105230006B8DF72C039D0DD9266C9867ABADFBDF0A
+:1052400019989223F7D152F8D27B1BE27E5628ACF4
+:10525000072C57841E07C47C5ECF5F6CD2F2853268
+:105260007FCB2A996FD5DEC5DAAAD93B304FA498F7
+:105270000FF4F0ED9A3D04F3408A79E03BF81AF21E
+:10528000E06BC883AF210FBE86147C0DDF4B445109
+:10529000729E2AFD3DE30DFB03FE9EF106B909FE59
+:1052A0001E631EFE1E637DF87B8CE5F0F718CBE1D4
+:1052B000EF31E6E1EF31D687BFC79887BFC7581FE8
+:1052C000FE1E631EFE1E637DF87B8CE5F0F718CB97
+:1052D000E1EF31E6E1EF31D687BFC7587E739D62BB
+:1052E000F207DDACBD3B50BA3E8EE9A339B52829A3
+:1052F00087D6F73F23FFE7C7B654ACF3DE25FC6E35
+:1053000060558447AE73D344B9EE1621D7B97D0EEC
+:10531000AFF3ED76992F94F1C2A1F403BFCAF874EC
+:10532000E957410ABF0A52F85590C2AF32DE2AFD52
+:105330002A48E157C177F85590C2AF82147E15A470
+:10534000F0AB20855F0529FC2A6807BF0A52F85593
+:10535000F01D7E15A4F0ABE0FB318203FE151D2E7F
+:10536000C8F9E9263D94E8D0A487BA4C79C8F9C6B3
+:10537000FA90F38DE590F38DE590F38D79C8F9C639
+:10538000FA90F38DF91BF188716F29EF1BDB41DE79
+:1053900037E6739AFCAFC1863579C3F95791B646A3
+:1053A000298F292E92EB729E9A05FF586BB8921C9A
+:1053B000EB213976C56F678DBF92F889166F972BF1
+:1053C000DA2D586FF67BD3BAF98282E38373FE3B02
+:1053D00091CB757F2BFFD1BAE7ED14AC376CCB9036
+:1053E00070E9ED3DC2A522D5EB77E5BBAF173ABE1C
+:1053F0005E8FF9A5010E5228F310079177BB331F7A
+:10540000F1ED5B2D8A8C0B5D29E37243E9AA49E338
+:105410004B5B2D3B0E4450BBF662C5837B07995610
+:1054200071C8960F3CD5E6439EA8CB89D5E2836B25
+:10543000AF423C900EB76E7F243EC1F7DD46B70BFE
+:105440007B198D73CD17C28EDF5B986497F204DAF7
+:1054500041DF1CEA57BC9B0CF4BD32479E7B3EFFEC
+:10546000B2ABCAE8FBD0EDB557E11EDDA408D9EE1A
+:10547000378F47331EA7342A9BF0FEC9E8EDC28B55
+:10548000FBB1BFD4E01EBADD652FE3715D7CFF4E3A
+:10549000EFB7784332DF172C16ADE313D927A1F00D
+:1054A000FBE63ADE687EAF627EC4E20FC18EFC2F5F
+:1054B000DFC32171F1FBDCC3B966786C21E2DBC488
+:1054C0005EF90EE4E4E1C5AB7A135CBE807C07F2C2
+:1054D0009A2F6A5FE3FC66F90E2493CF48868FCF3C
+:1054E000C3417E85DFFF98E2DF68E9E5C6BDE015D0
+:1054F000B604D4DF2E3C500B060979AF559F57B642
+:1055000038620957402FE2957803FD11E798017A38
+:10551000C9F3D8F87D90A956970DFC4697738A5D1C
+:1055200072EC4275740CDFF70B91132E36F6E6B869
+:105530008D7F3D8EA483EF932FDF15CE72858FF87C
+:1055400007F8E6B93C197759B9ECC39196D4AE384F
+:1055500092D32981AD78DFF374EA8EE8510ACB113A
+:1055600087C05FDB1A9FE77B82C5AB5EE3FB10174A
+:105570001B1F8896F7AAA47FA54CC39B6E6F5AA8E1
+:10558000AD4F99163F74BC5EBECF4BE730BFF7718D
+:10559000B1D1C67246A8BC2884EB0F88732B6FB4B8
+:1055A000F1DDD3C56B8B57278AEE7E77C52BE3CF12
+:1055B000B5719734DA384EA85C7B472BF477589650
+:1055C0006A72E8D26DE6EF277242E44FFDFD44AD0A
+:1055D0004EF15BAFCC6439A8D6C671EEF35748B92B
+:1055E00048EC1001DC6798BF629C05EF58CCDFE502
+:1055F000F528DDD0D13B9A7C34098312DEA75E8A80
+:1056000060BE32ED523FCECFBA94C8E98D97B2E476
+:1056100077AC1DD14B6BA1BC5FFFBE2617CD441CE0
+:105620006501E4B23E4CD71D44D7182257E35743D7
+:10563000BCCA2B30C34FB2F956214E73D246C1F7C4
+:105640009126437EA282D990A70AB02F520AF93E32
+:10565000C64485EFB74C1EBE4CDB07B42F04F311D4
+:105660007EF7C3377E6A00F137B37D3B2C58777DD8
+:105670003FF8FC6DFC0EE664BF62C77B813E4DCFF8
+:10568000D6E93D745F2C88D4EC634E69FFEAB48F91
+:1056900001587E9C27F246C4B32E802DB39FB6B02E
+:1056A00084AAA86C599E9C1B79632394AC7FD36E0B
+:1056B00032DF6291F79F48FEE3787571A4B00FE581
+:1056C0008BD72AF98897D7E1FA7AD8D849C37A775D
+:1056D000D14149E7FECCEE03BD60F95D1926FF4CD0
+:1056E000685A4AF8C63E5A10D3FA63FCD2D0845C9A
+:1056F000E11D9F8877C8F5F98A20E202E76AF9DBA5
+:105700009EBDF28F6B9C8C27CE8FCDED7723E23F31
+:10571000FE65FE385FB11A7F37AA4DF17973E53D1A
+:10572000C80958DFC8EC767EC76066A64B9E2F215D
+:105730007696DB72DDF25D84107B4B69B63C6F843C
+:10574000D59D3C8FFD3A6EB657EAF33E6E33DF339C
+:10575000D5D3EA5C6937F8BFBA27F1A045DEFB7FF5
+:10576000C412D8F122D16BA0B76F01E6FB08E2BDED
+:10577000197E1FCF4F7F47A3934F69EF65E8F474FD
+:10578000ACEE22DF972871DADDAA819ECAD6287C8A
+:105790001FB1A44EDE27F6AD51E4BDFC1EEC578FC1
+:1057A000CFF99ADF517AFC1711B250C3EF7CFB910D
+:1057B000D71C295DF8FD53DDAF6C927F0633106F67
+:1057C0003FB7369CDF41FE7A58D18F017F64B687A0
+:1057D000D76912F134D49F1AE3FB29BE97882307B7
+:1057E000616F5CF0F3B7F87DE19ABD29FCEE61F1E1
+:1057F000EEBCD57847E5EB61BE3B72897E8B9D2E72
+:105800003BE490EAC6583E9717F4D1EEA98B76F6A2
+:10581000E7E9EBF360AE94078A3C729C0B9A3E4535
+:1058200008B34D35D593E77FE83ED4EDA2A1F695B8
+:10583000D0F72ABECB9E027B89DD6057D5ED31B60D
+:10584000ACE373709ECFB777FFBB8DAFEB76474D60
+:105850009F5DD8A9CF664FE803B97F9DE2821DBD49
+:10586000CCE9BE11F1F565876C88F01493E2DCF2A7
+:10587000DD92BBE4BB2525B7E6313F9B8F35C9C719
+:10588000BD8751BC8FCB0294C6F7BCDFE7AD7B650B
+:10589000C01ED053D0CBF7E0CB5C5E7B9C412E2A60
+:1058A0006D524CEF18E8F91773A51D723EA919C087
+:1058B000DF4DB7A6D8F186D07C128F1037F8BA46E4
+:1058C000277A3BAAC771259352C541F9AE14C19DF1
+:1058D00022C733FE4E514993F93D06AACF72DDFE31
+:1058E000DC28EEAFD845F34E41EA6238090F8CA7A9
+:1058F000F67BA83F378FC3EB511A0CD86037988FCF
+:105900007816CACF75056C18A7A451BE8FE25B2B21
+:10591000C7F1AD89B5E7402EB0BAEC038CF260A3B5
+:105920007CCF78BEF6FB11042FCBCB658427DCF34C
+:10593000D2EF7D86E2AB5883BFAC29D62C5F36AD63
+:10594000B3617DE6F4F05EC3971A1D97348EE1FBD8
+:10595000F565562FDF97F069F8FEEBB2F0BBE12753
+:1059600099D3FC902D05798D2F7D093CF7069E82F9
+:1059700019FC3ED2B2708E679EE36AE2F976E2FBD2
+:1059800001C20FE4155711E39BE8C48F38C0B2661B
+:10599000F3FA76C11325DF656F2EE6FDB7C8EAB3CB
+:1059A000BB8C70ACDF9F81FB5B7368DFE3FD27E19D
+:1059B000F2F17DCC530FDCC8BFFB063881E7288F9E
+:1059C0007B02DE3B22BA61BAD6E9674181DCCFFABD
+:1059D0007851C3ACD20E3FECBBF6A9F720E4F30636
+:1059E0005A6FD8FF7BDAA7765C00A471ED65F2DD13
+:1059F000BAD07DABEF577D9FEAFB56DFCF8FD98AB8
+:105A000082894A17DFA1F3BDF6B96EF03449837776
+:105A1000AEB6AE84D75785C1AE376298DCDFF3539C
+:105A2000CDFB1FFDA1DF54BD7C6C3003F73DF5FAC3
+:105A3000FAB8F3E3643BEC03D05BEA304B67FDE577
+:105A40005CDF62E21FA59DFC63FBAA04F08F1D0AC8
+:105A5000FBE196DF23E5BEE5CFC87BE16796BFF8A3
+:105A6000F62CAA77FAC18D0B8CF72FCA82925F2C85
+:105A700024790BFC6391260F6CCCF4E50D33ECE735
+:105A8000B2FB9FC9C4FE98DB92770A6FA8D1BCF91C
+:105A9000BDA33F3FF3D28757B9BBCE5D7D1E256BBB
+:105AA000DEB5153B8D7893F47E7756079F5BA5385E
+:105AB000B7E853696331F36191487A8FD2B5EEA1AB
+:105AC000F450DCA8B09C575A3732A0FE2FF2EBD22C
+:105AD000B553F98D287DBDF4775FF47357877FA6A2
+:105AE000B64E73357A9E3D4CEEC3B9E529F645BCFA
+:105AF000FF53ECF8BDCD395AF99C32F3F7CEF5726D
+:105B000075F2FBD5D827B89F84F5EA586B93F6CB8E
+:105B1000ED97AD5732E4021D8EC59A9D72A1666F56
+:105B20005CA4C9CBB45E8B8DEBB5F871B95EA5CF23
+:105B3000BEF517BC5346F3D3DEA393EF0A94B4EC3F
+:105B4000E0759BB3669D2D85EAFD64588A29FEA801
+:105B5000B436CF053BFDDC351B6DE0073F1926F160
+:105B6000164AF7F3B5F8621DAF388F14833F47AF7D
+:105B70000F3EB883C6B9755978B4F177ED021A3D76
+:105B800097D6C6C661BCD2DAE27BA17FE9E740E8DE
+:105B9000FE3B112EF74509F587FD79628C87EF559D
+:105BA000CFD77E372FB4FE431ADDFDDA26DFBF4C98
+:105BB0008A6C7992E33B6A223CE013E9E9AD018CFF
+:105BC0000B7A06DC768B7C2F33BDB2F573C041A215
+:105BD0003CC7F520C57B5B10ED1328BFC922EF79C8
+:105BE000A5AA32DDA7E107A637948B5EADFC1E5F48
+:105BF000E7BB5121F46A179BD7E0DD1F7B2FC1EF74
+:105C0000A6E9F4A9F7A3D3A74EBF3DCD6FD7F79C64
+:105C1000DF8914CDCE92E54976D0B80BEE1BC4BF18
+:105C20006BF15DF3B46BEF3576CE374CFEDEC765B6
+:105C3000F34D97FA52CFF36D2E4CE866BEA1F3D424
+:105C4000F7891E43DFE94F6992FE94130A9D63D4DE
+:105C5000EEC4B2708EABD3E7A5DBF5BFEFBD878F87
+:105C600086C569F6AAD628C897F3B5DF51114199C0
+:105C7000C7F7A986EFFAF9AFBF5FA7F3E993B5DAE3
+:105C8000F9285AEFC17E1675697C0FF558D389281B
+:105C9000BC1373628C844F6F77AB4DDE73165176F5
+:105CA00037DECFBBE9D63CFEBD94858D7D589FBDC8
+:105CB000A92E8DF9C24D7E581745A71EB048E38323
+:105CC00091B716AFBE02F5D7A7F0EFC22D747A4E8A
+:105CD000ADE7F6433D9013239BA7DA53591E96FA7E
+:105CE00082EE17BB5511457C4F0D7C12FBCBB23FAA
+:105CF0001DE7CFE2F5523F9864116BE03F1DD8508D
+:105D000034A12FF8C4C38AFC3D9A0DE6F7BC860E79
+:105D10002AFA027C26F45DBC5B6D2D5EE8A782E466
+:105D20000ED8D1163A8B589EBF45E393C79ADBF83D
+:105D3000BD7E1DAF8FE0BF78A72AC47E146A271AE4
+:105D4000A8D907FF1FAF8F7B3D0080000000000037
+:105D50001F8B08000000000000FFB57C0B5C546541
+:105D6000DAF87BCE992BCCC080C84512878B84850E
+:105D700034C080D7DA518150BBA0BBB9BA218E653F
+:105D8000CA650650DB5D77D7FE8CA1A6667DFA4515
+:105D9000A665ED80976AC376483428A8C90B99593F
+:105DA0007F62376A2FB9635BE62D40BAFCEDBF6DA9
+:105DB0007DCFF3BCE7301751DBFDBE6FFCF97B797B
+:105DC000DFF35E9FFBF3BCCF3963348C751B186324
+:105DD0002A8B8E413968488964998C8D09695F6185
+:105DE0004C89C3F625DB45C64640FB7C93C8621947
+:105DF0002BD731FA7D8FBF1F31761F3C37C3F3425B
+:105E0000A934D607FDD737CCA072C9D6C26DAEF182
+:105E10008C250925B1936360C0E36AB6078A25CE55
+:105E20001977302BCCD3A48DD225C373B52B29C7BA
+:105E3000E09F6F49E343490CC69D69D4CF77437B0C
+:105E400081694E41148C5FBA332A5B32FBFB5D6F74
+:105E500011181BC958A573461C4B61CCF1DDE167D5
+:105E60004CA9B01F98D304F37FE50977BBA08BA39F
+:105E7000AE2D4982233CAAB3A758A07F95D8316F95
+:105E800012CC734E70EF4DA0FEE63853C0FAA1E578
+:105E9000E93AC6CCE98C39FFCF8734CFE7E2893BBA
+:105EA00016C07887737F04CE53F5F81FF201326C69
+:105EB0009D68CFB2E4E1BC8D7B4D121C747B6356B0
+:105EC000099CE3BEC7C746DA332F9FF7B668B6A86A
+:105ED00004DACBDB18C157695FE88ED420DCED5EB5
+:105EE000A6316169629A6828CF486C9507CADB526F
+:105EF000D8A2B9067FBB0DE100EB9E89DC9254026B
+:105F0000ED157B9F48324379D6C8EBA57B7F7A9C01
+:105F10004540FFDD5A0DE2D5AE621A0B8CBBD7258A
+:105F2000D8DC50B2F268C61210A36E7D9991B159B7
+:105F300096709AAF627B0E63B9FE7DC1736A3FAB08
+:105F400062C5B88F31F503D9CBA1FC8BCA7B1FE2A8
+:105F5000F32FB57A8B2B19F16226BCFC658B548428
+:105F6000EDAEFB053656C0FA7E631AAC5F16C96A01
+:105F7000717CA1F4579B04CF571C10B2B5307B78CD
+:105F800066B7E61E039116D159B589D3D98A7675BD
+:105F90005122E07F458B402D0E9557331CBE2A2F92
+:105FA0004D66E680FD56B6B668CCB08EA319CE0914
+:105FB000FD1D9E539AA5785EB685B17CC027FE89EB
+:105FC000F86B3EA5B937003FD5AD1C2ECE56DEBED0
+:105FD0003803903B99B66213D2A0DE2650BD3E6BCB
+:105FE000C2FC35AAC07AFEFC3569589A084E4C3579
+:105FF000905402F0DC94D1A341FC3BD7CAF3425D3C
+:106000001DB05E0D12E548DE9E6AC0F1661AAF3C17
+:1060100077B646D178AF336C03BB0936516D50610A
+:1060200059EF344460B9B356CC50597173611609B5
+:10603000E0DF111691C52261CAAA5E3D4012503BB5
+:10604000705884F6DC48FB83489F710CB802E83333
+:1060500091790506F4DFDFF9592ECE7FCB18DF17D3
+:106060000CB6AE5E337D7E01D0C3268B7C8E4C5F3A
+:106070002ED2F1C84340AFB0BFA7D56C833E07CF47
+:1060800057C2E6423BCCC208CFDF84B9F7C0DFAFCE
+:10609000316F22CECF74DE541CF79ACCA7255AC399
+:1060A0000601F6F59B14FB63B88F3B05F5F86C1100
+:1060B00071208DC57EFD6AFE9C6D79C2A603FC4FE2
+:1060C000E7E867A345E66240A29A51F106A463C1DE
+:1060D0006663AB60FD07330FDDCB802E1E1ED03113
+:1060E0002D9CAF5ECFCF3D7D20EC9400FD468F2AE6
+:1060F000165916F437AB5829F43F94297A55D89F8E
+:10610000E9DCD89FE90A6DBE0C599681FCD0887AEB
+:106110001BF5EF78F31B01CA44E9E2E1483857E286
+:106120002F054B3DF4291B3CFDF4FF85B2F452537F
+:10613000CBEFA1FC75A4BD19517772B0F8941D5036
+:10614000F6B0C9A3B364F2F902F7DFF1AB6F22A294
+:1061500045FFBEFA074EEF7BD98AA5CE22C0B8E92B
+:106160001D92579B75F97EFAE361E3A9D48FE1395B
+:10617000FB0DA25B10B0FFE10F717FD37506AF146A
+:1061800081E3D4177C3AFF38661E1D75FA4646280F
+:10619000F83E91B158DC3C8C1FB8687037C1B96FBC
+:1061A00091F94FA1AF1E8B48F8E991F1A4C091E994
+:1061B000B222917EEBD58A5EF085B34C3F7FD6E864
+:1061C00038FF0C5E126D38FF60B9D6CD608AC18E83
+:1061D00054D2275792A77F0079CA40D7BC976AFB51
+:1061E00033C20FF94A07FC78970C2FC03FC3F9253B
+:1061F00079FEBB64B8DD6510399C7E120227996E6A
+:1062000014BA50F62F98635869B41F9FECD7DD4736
+:106210002393098FE3FF83E3EF13C2DF3727D60110
+:106220001BB151FF984578FC5FC09F57B4FE0BF837
+:10623000EB0EC59F577F3DE2EF71D1D284FC800801
+:10624000C8A1D226C2F9580623FE2F93C22C9BE088
+:106250007C76E4FF9B88EF8F22DF2BFC3EA6D837AD
+:106260001EF5E449C69EC17DF9440FB5A766A71087
+:106270009F5FC7BA13B01DF09C3717F12ED876E890
+:10628000242C7DFB5E86F55D1506CB1E386FBF5B4B
+:1062900074A961FE8628F78EA5B06EC35D991617A6
+:1062A000B63396D58672A03CCC827ABE218ACB8545
+:1062B0008605E9A4870F7E2725ADC2732C08B33469
+:1062C00041FF866CDF2313A0DE30D66C7141D757B7
+:1062D0000596BE1DC7CFD1D13A0D7338DD363C329D
+:1062E000DA8D7A05F4CFF37AA83F591EC6F09C0DDB
+:1062F0008DB68468A0CB9722ECA3B361FFA3244E94
+:10630000D70DC9D00EE536A164C17D38DF78BE6FE8
+:10631000DF82B017F7C22CFA341059D07E7295B1D3
+:1063200009E5A5429777A5737937C6756A07C2C98B
+:10633000359D65D4C2FC7F93E94B81BB60636C558E
+:10634000B41FFE0A9DC5C8701756737A734D97E542
+:10635000623573D70B085FE60B07F8966941414237
+:106360006934D9ADB8EFFAE5801709F7CFE17F526C
+:1063700064E59E61F8E747282CF3884C04E48F32EB
+:10638000C6F9A30CE908E96F15D05100FD31DF759E
+:1063900051A7C3653A82F16B8D25D370BDCF853F80
+:1063A000E463E3897F4AF3875B67563697030BF410
+:1063B000F699D89FED8E14515FAE30F1F54E647FA3
+:1063C000361AF5C5C95FBD791D96C7234A6ECB86BF
+:1063D000FEDB167C5D84E2FC6F093E359EE36F0BAD
+:1063E000FEFF68B443CA56BF49F4FE43F759281963
+:1063F00032504EAF047DA615B0E474B0F23E467440
+:1064000090C86A896EE365FD050CA3473975F300F2
+:10641000D88ECABCF0FF4797746C89CE5F9FC6A226
+:1064200082EA33740941FD0B4DC941CF6F8D1F17AF
+:10643000F47CA6393BA83E3B635250FFDB2DD38250
+:10644000EA774E9C19D47F8E6D4E50DDC64C241FCA
+:106450003AEA8A733F01BBE1B5BA92DC4F5497E345
+:1064600063AAF6D07EB305E824DB3B5F3509EA91E9
+:10647000875626437D53CB115E4F3CF44532E06690
+:1064800073CBD1F92AD0DB536F3CF4450AD41F6D8E
+:10649000E9E2CFA7C062A340ACB6BC39DF05F89AE9
+:1064A0009B62DF8AF89A77A9F6288AF9F7D7CCBDDC
+:1064B0002F5942B930677406EC2737C5FE103EBF2E
+:1064C0002BF69E759100FB1F7D5BAB463CBF985D34
+:1064D000B215E9A1FF22A7F353889791FF7E099691
+:1064E00003D9618A9CBD923C54F8AD03F4C61215E1
+:1064F000C24947A5B7CE44E5A1BA782A8FD499D925
+:10650000128063575D0695C7EA2CD47EBC6E229537
+:1065100027EA6C54BE5B574C65775D09950AFFB25C
+:10652000BD960D6A2442972AEAB4CE4F8F57D263A4
+:106530002028D969059FD0F94DBDAD399BCE759DF9
+:1065400009E959693FDAF9815904FA9D6AD5113D83
+:106550004F35749B75565E47B9B8FB22F38A11BC60
+:106560009F2AB05F8C271BFD98A90E03F54B1B8457
+:106570007E59D8EFCD0494F7536B3516B4639E5013
+:1065800033971EF66F14DF90701DE320CA6CD80598
+:1065900018D53A905771A06BF139F4633A28770F08
+:1065A000F2F54647D72E47F934BACC60A9E7F29501
+:1065B000E44BE2086F02EE2F71A586DA8D628F1927
+:1065C000E5605F9D7716D269812CE70A345CEF3075
+:1065D00011E4BD807CFB6D5722DAF3EDDC9E2FD0F9
+:1065E00096EC44FAAE5671FE65317AF71E5C47D5DB
+:1065F0005DF12CF4EB894DB46C4268C51F64696091
+:10660000B717D61467A2DCED615B88AFC15EFD13DE
+:10661000D2DB8F3381DF459948609EF8E2F0A64DCA
+:1066200002DAADD7E7215DCED59A0F30E0075FF6ED
+:1066300000D1FBDC48731E7A0ABEECAF793DCE7CFC
+:106640004080E7263630BF00EA55CFE94D9F04F081
+:10665000A9D3131554AF694B307D12C0A755F80765
+:10666000FA47B7092A94BB0E792BA704FB05C4B7D8
+:10667000B3F8730DDFDF8006EDD88BD966A26FB05B
+:106680009749EF0FCC34BA9B60BF71236AB357A010
+:10669000FD9469CEC37E49EA8108F463FABF5515BB
+:1066A000BBC9EF1988F8C9783F7D3DD321517B28BC
+:1066B000DDB5E6707FAF26CDB019F1501DAFD351D7
+:1066C000D971B188919D56928676B94DC3FDCBD0D4
+:1066D000F17B73B81E495EAF21B940A208B66C0BBE
+:1066E000634ADDC52632D6F88BB021BF07C0C93456
+:1066F00063653FC8356247415A507F1BF61F7A8E4B
+:10670000F61CF38F4F7949BB63AD4A5E0FE96529EB
+:1067100073A33F182AC7AB72A365B9C0F1FC748C90
+:10672000BE11F19C26017DE750C94C50268633B23C
+:1067300037135FD7BB913E77EB39FDA789BCDC2DC2
+:10674000F2FE9A30E6427A57FC874DB9F629B979BC
+:10675000348F97E6915AB291AE139887D657EC24AE
+:10676000A51FD8437A1202AA8174C4D754491C16B3
+:106770009E2772A615E58C44FEB0B14F03E4775F07
+:1067800078C4AA40FC55E37843E0B8E9344E19EFE9
+:106790005C25B24F47905C243A72A689E42F564B91
+:1067A000EC8880FE16EBD6A09E53C6F5821CFC1426
+:1067B000F0F047908B587E08F210D7FF33C8432C77
+:1067C000FF0AF210DB4F823CC4D207F210DB3F0617
+:1067D0007988E5BCBB8D56E49F9AB669ECD3207EE0
+:1067E00050DB7D01F5DE69C3D39143A6A3DEE4E16E
+:1067F0009FAFCBE17E45EF2D1C9FFDA0BFD1FF00D9
+:10680000BA5C6B8ABEB21EEF37B2F91E80D3B67C7B
+:106810006E87F427F0FAD21C35D56D22DB8EE3B7F4
+:10682000E56BF8FA2962393EB745F3797BD345B277
+:106830009FA64E9EB624079EDB62A13DC75FEFBDBB
+:10684000813FB78DE2ED437A567E3E25D7A4F8EF1F
+:10685000E9DC2F65642701BDD3FC4AFFF726723EB1
+:106860000CEDEF4E138BDDC3C0E32D996F892FD054
+:106870009E463E480EE08B6A33F18542870AFD55FD
+:10688000E57238A769653A07DD42F0431D83723A25
+:106890004E4FF625C0C5C6E03CBB05995F42F901E5
+:1068A0004AD4070A3F287CA0D07B22F09910ED3F04
+:1068B000C7CD21F4AA948FCAE7E88E35FE9CF0DAA2
+:1068C000A136A1DF7733CC87E313C5C177EF46FE4E
+:1068D0008C359AD1F52C7CC8503B9C1CEBFAEFC24E
+:1068E00043910B5780C76570D0F0F25F8503C939BB
+:1068F00094E348BFC3C8ADFD39D1B25DCEE9F744DA
+:106900008E6D1FD251BFA057A1DFD0AF67C3DAD9B8
+:10691000DBF2397F287454053A10EB8978CED4CB5A
+:10692000E59E729EA1732E6324FFD2C2787B289EBF
+:10693000957305C8BFC33901F11FC6B87D711DD855
+:1069400017E84F4DC935D33EFA477E56B695F9CF75
+:106950007F470E6F7F4A94881E14FD32D42E488BD9
+:10696000E66406E91D66423FAF534BFCEE057FE649
+:106970002518873E219BE43FBF20E37170FE58112C
+:10698000EDBBBEAF0D2ED4637DA3064E0A30BE6FA5
+:106990003B18366497D86E1340EFDE073A06F5D4FD
+:1069A00005907B2C9DB173721CA1CF73F124FA73F7
+:1069B000353B24A603504A3BBE9A87F4B4B4536DCA
+:1069C000A2B8D0F6C78E213D9E6E15CC6897F4B55F
+:1069D000C2F1A1BFB3C1E8D643FF22A863FF650699
+:1069E0008DDBCCD7A3F883435EEF537D750AC68554
+:1069F00066EC5013DC973E2FB9D13E3BBC7DA50A17
+:106A0000EBA7DD028B837145D2EAAE04A8573E2D79
+:106A100058B430CE61283A8BF182CAE799C50BF39E
+:106A200057B618C9CF5DDAA0FED817605F94BBB720
+:106A30006AD0EE29DF19DC5EB93BB80EF822F9EF17
+:106A40006886F600F9FC6D8E3186ECCD712C1BED5D
+:106A50004DD6C0E3B98A7CBFDC6E757139BA82CB82
+:106A60006DC6BE8C457F5FEAFC2AE96303AFCF9118
+:106A7000EBA7A0FEF9571C2F0A5CAAE5B53F4F60B3
+:106A8000560F9CB7BA536F42FFBFBAFDEF1118B74C
+:106A9000AF09F3517C9FBD2299D0DEDBD826B91017
+:106AA000BECE0EFD2E11E0567DE03D8DD988705F83
+:106AB0004EF6CAADCCB51EE3DC5E5164DD4447DD65
+:106AC00014A766B681A5384F5FBBDE847640F52BF0
+:106AD0001F74DD8DF50302D3231E47FB884E96EE0F
+:106AE0004086A52DDD26E4FBE94442BC229E3D9173
+:106AF00084AF658877C433E01DF12C213E71BC5111
+:106B0000E3E6742251FDF4731CBF0ADE8BA4CD1A98
+:106B10006CAF6CE4789EB163CFB630A2033593E9D5
+:106B200080F07E7A27C7BBA6739D6614D26F630878
+:106B30001DB46B87E800F777191D84E0BF02F08D64
+:106B40007220940E42F1DF93C3E506D8DFA79F427F
+:106B5000FBDB087E01F3C7234656F51E8D81F5CA7F
+:106B6000A2CF3B9743FBD8F89758DA088A7F15E401
+:106B700062FC6BE63BEB105D3DB35EC8467AA957FD
+:106B8000FBF63C81718BA8708AE3F427CFD9F932E8
+:106B90009CBB20FA9BA416D87FCD6B5ABADE28C9BD
+:106BA0001587EC358C9729F174C033C5C99C1D5AE3
+:106BB0001E176B2DB405FA73FD09FC5C859A81B232
+:106BC000E5E817C07CB88E60E37E5E55078F172816
+:106BD0007E59951237680E8E1B08A677A85F452E42
+:106BE0008F5FA5C6DD6C463BBC7E01B387A55E4DBD
+:106BF0003FF078CCD3B2DF7445FBF10A7A42B11B87
+:106C0000992B386EA1C8A96513F91E8FFEE2B86AE8
+:106C100004C6FD760B848F8A0E904F70DE0AB7DAB9
+:106C20006D1602F849EEFF19D21BC0ED8CABF6A031
+:106C30002821DD1968BF0E993EAB918EE0BC95D638
+:106C40003722F09C0E59AE38DA8D147FAB645B8A24
+:106C500090EE2A613DEF30F454F95C0BF929D7A28C
+:106C600027C5CEAC6E0DEEB7317748CE8CFF1EE057
+:106C7000BB016439D77B2E99FE3223F1DE6F9099E8
+:106C800023919F87F49FC0ED3745FE5CBF1D583CA4
+:106C900060DE716E1D5305AC7FE373A6A0FA784FDA
+:106CA0007C50FF9BDACC41CFB3BD1941CF738F59D4
+:106CB00082EA79DD1383FA4FF8D016549FE42B0E45
+:106CC000EA3FE54C49507D3013CE7395FBC15BE341
+:106CD00085A0FE33CDFAA0F967674405D5070D32CC
+:106CE0007C64BB52B1775FCEE5F66E68A9C0F776DB
+:106CF0004BF03A8ABF7EE7C4E0F5E6D882D7FBA125
+:106D000078D90BFA54057EC273A05FB1FC1DF8134D
+:106D10002AF0139AC19FC0FA8BE04F60E9017F020D
+:106D2000DB5F027F02EBADE04F60FD20F83F586F64
+:106D3000AB2BA6F295BA126ABF16FCBAE4758FC9DE
+:106D4000EB1E97D7FD77E174429EEF5D79BE6E9C96
+:106D50002FCDFFDC593C56BC04FC3C2DFAACC68759
+:106D60007EC30A5F11C62D06DE9218C6A599DD7D89
+:106D7000AC2E06F5D9088A33B39281B731AE527D75
+:106D800020D5B4C98CFAEC0FEFE2F3BE56C98C7C67
+:106D900079A8EDEF1138CF854B61745F4A7A10EF17
+:106DA0001BBF6154DF04CF310E3AB3050408E93745
+:106DB0000FE9B70B694ADD4DF7BD25CD2D1AC45338
+:106DC00015F2293C7FCBA30E7EFE5C63D07313F6D5
+:106DD00087B24AE5A638C2B936653E2FF577A4F1E9
+:106DE0007BCF73CF1D5E3F05F56FCBE211787F5EE1
+:106DF000D5FC5EECBD57C1C7E7075FC8A4FBCA76E8
+:106E000098CFE09FCFD9AE96EB7CFF8EB496A26868
+:106E1000541CCD021B0BC505B685EE5FAADAF63809
+:106E2000506E5565DCAD66009F7E8F24C737F8BD78
+:106E300091C3C4B81DE7F92202EF575FF71CBDC329
+:106E400086F8ED381C81EBF6B74A41FED3682BB7C4
+:106E50008F475B3584BF0BAD8723F05E77A3E730A8
+:106E600087BBCA4BE73F24D7FBA12478B74974FE00
+:106E70008A4B62D03D768655A27966B68D35E2B9E9
+:106E80007A3C7CBD1CAB99B7A72D5E82FB3F1EBF31
+:106E9000204F227B100435CAF11B66EF413BA4CA88
+:106EA00023D986F3EF0AE479BBD49C4EDF4ADBDFBB
+:106EB00085F2F878F1886CD2118A9F69E5766F9136
+:106EC000C69E867AA4C76036229D3F589C6A44FCC1
+:106ED0001EC212DB8B7769EC06BCC7E6EBF598BAED
+:106EE0002390EE7A5A7325B47794F9F2E57587E822
+:106EF0007B086F2EC253B9BBD180F3F8F1C7DB73A7
+:106F0000AC26EA7FDCFDDE3CB4AB7A32C2C92EE9A6
+:106F1000D230F2A7AB9AB95DDCD391D818784F92F2
+:106F20006395FDF20C91F0DAD7A696FBDDBD8705DF
+:106F3000F553D3392FEC0EDE8FC97DEA51B4C71D4E
+:106F40004F4B0CF5A2435D1B8BE7FF6C67F0FECA4D
+:106F500065383BD4DED8D8007A75B40FF18D81E85E
+:106F6000BC5DE11333E153C1634F06B7E77AE2F941
+:106F7000BDA4A3650FD1F5E5F1A4EE64F41F127F63
+:106F8000A9A378E7B5FC67C56E08F0AF18FA8BEADD
+:106F9000E2D43C31C56F1FBC966BABB68E44BFAB21
+:106FA00084FCCA1E06F62CACE9447B3A92F21FB66A
+:106FB000E1BA83AD6ABABF76EADA667D0276D9A015
+:106FC000051805F63DB8532DDF7BD90C68D72E95F3
+:106FD000EDDACFCCF67C09F4AF738D48E7736486A5
+:106FE000911FD327CBBDCF5B92EF24BBE1986442C6
+:106FF0007F688687DBC18E666ED7567B92FF632AD9
+:10700000DAEDCD6ACCD4608A1DE294ED90D3B2DD86
+:107010007B7ACD8086FC9B4E813D968C792A5BBB2A
+:1070200012E1B9337316D9B34EA999EC8965DB83A4
+:10703000ED07B06F82EA55CF85DA17727CCB13DC8F
+:10704000AEF887DBAC4376C638F4670AA5A971C8E9
+:107050000F2FC87855FC9B95E32D94B7B351659ECF
+:10706000A5C421105E359DFB2B70DF6E479885FC13
+:107070008D55AF105CFBBFE47E4C7F3C2378F4332E
+:107080000EDFFE364EE7356AC18DF9483540B6341D
+:107090009F4E70AFC138B36B3082E41363C5C8171D
+:1070A0002B16707FD586315F286B157E08D1ABB764
+:1070B000A87C5254809C68B3A650BF020DB3A33E77
+:1070C0005B69B4907E1BA3E3767AE16A4F36D2C344
+:1070D00018F0C7B501F1F831860101FBED7E80C7DC
+:1070E000FF9578C21C95491D15A01F195B43FD959E
+:1070F000F941A2F0F1D79ADF04F31BFCF303BC23A0
+:1071000011DE5F582DA4B793E628F7FFB5C497CAE0
+:10711000792E00BD611C1863348837C7CE37C89FED
+:1071200073B2EEF538AE2882EFA308F783F5305E30
+:10713000FE5196E7B179BCBC4D2E15F9D590677B11
+:10714000DF0AF59579F63F5949AE99883E57CAB49A
+:1071500002F64C9C6F18F9BBE21D89F0FA05F003AA
+:10716000F2FBC25AC19C16642F713AAFE14DEC3C60
+:10717000F3F44E4538B86CDD1998D7C6387F2D5AD0
+:10718000A537A705DE0720BDA3FF5102FFF2D12FCF
+:10719000E3BF7253C56D9457B52AD68CF71735C81F
+:1071A0000F29D7A6FF50BA87DF4EA4B76AA6B5A0AD
+:1071B0007EA9690B7D6E51A13DFE4D085F24C97407
+:1071C000DA6817E87EBDF15B158FA3950A1437BB0B
+:1071D0000B1A914EE987FDCAA7B9717ECCB3A0FB0B
+:1071E000AE861839EF2B86EEE17E229FFF2E95F7B3
+:1071F0000DE4EFA36A4F32C6718E3AF93DD502E62F
+:10720000A17BDD52D64D656F78F5012F4DEE1A8DBD
+:107210007EF807762DC5911AD7361951CE66B1B5CD
+:1072200026BC1F033679EEFBDC2BDB1BA1F7689431
+:107230009F95E7C7F3CABC92F83CA0833380A3F8BC
+:107240009CCBC757BD7F2002E17EFEFEFDF37ECAC8
+:10725000D00F02B905F354D6B664D0BD8C8B7567D8
+:10726000E4FBF1ABE053C11FB49983F00A67B90E98
+:10727000E0339F0DE4636ED3B5F0A9C039493DF00A
+:10728000630425E8319243A17856E05ECD6AD53C8F
+:10729000FE56FBEE02E8FFB3B5A219EDCACBF07EB5
+:1072A0000DFC78F5FC91D728903F7B257C29785AF6
+:1072B000C8BC54FF308A8FFB70A144F1C3FF697CC6
+:1072C00035E4D94BF2AEC2B7A17C7A25BE5CB42AB4
+:1072D000847F43F874882F2DF02F007FF65511C45A
+:1072E0008F0A7E1D66F09351FF75182D6E76393E1C
+:1072F000D1DFC5FD54B60AEC49E187F0AB8FFCE362
+:10730000507C01ADD8501F54E705F3A982C72BC9A3
+:107310002D45EE7DC4BC474D02DD67703EFE85966F
+:10732000F2E994FB0CE5DEE2D13CAE6F42CB8FC0BC
+:107330006EC17BA24D193D23D1DEEBD528F3F07B46
+:10734000D78FD6748FC67CCD8FA6F1B257C3F34CBE
+:1073500094BA2D8CC7033F4AD0BA106E1F09E3A61A
+:10736000A31DF091F0CB3B783D4E63C6FA82B8E99D
+:1073700026A8F7AA95F8E183B2FC7653F9D18209E1
+:1073800005D44F6047101E668195D03A82105D0C7F
+:10739000FBF9E8E76373F05E4039FF03793C8EF454
+:1073A0001BF91C43F1F65F09146F5F04AAC384F74D
+:1073B00002D39F284E81F693BF4ECDA6FBCA15C1BE
+:1073C000EBA3FE4DA638E5569AE7964B03EAC5991E
+:1073D000FE7D0DE9CD828BBC7DC9D8A07C665BF4B7
+:1073E00038EE27BB5323518F297A6DF0D87E436046
+:1073F0001CF5AC1C771EAA8F7B2429502FBEB1F739
+:10740000E1749CA75CE3CAB218308FF9A924B41FB9
+:10741000CAF73E944E76EDDE8DE9E89F94373D9CA9
+:107420006EA37AB89DFC23153FF7F97D93766D0A1C
+:10743000B0A36F9DC0EDFB52DD1B8568DFCEBAF1B6
+:10744000F37518B71FFB6B81E2700B59F73AD4B78D
+:1074500065199CAF58838EE43FCC47F7A47BC6DD0B
+:10746000BE1BE5FEF18CBFAB97A0FECD53D17C6572
+:10747000CCBD390EE36F1B048ABFF9FB8FA67BD707
+:10748000C56B054D7C0CEA519E77FDC7BC2882E395
+:107490003D1BB2BBB0BD6C356F9FA575B7F6E03C28
+:1074A0004F6828CF0A14654A49C03DF61FF3F83DDE
+:1074B000DDA2CD72BEB1BCCED86DB18D81E7FCA38B
+:1074C0008C7F56FE01C9833B65BCDCB6FABD23F157
+:1074D000306FA4DAFE67942BEF3E7E3A0DE55941FA
+:1074E000F4D94CA4F3B11AFB931578EE262DC52BD5
+:1074F000AD5989521CF4CFB97FDA63582E5ABDF8C2
+:10750000C90A8CFB6ED7911FA6EC6F856016D15F00
+:107510003DDCF8D37B106E671EE779A42B1AAF8F82
+:10752000BB5AFEE2B3753C1FFCF93A1D952FD49966
+:1075300098198EB8AF2E9EEABFAF3353C9E673FADF
+:1075400052F2A6AE345FEEA530CA5BB66ED0511EC5
+:107550007DAED6F6551EC06BEC0DCEA68DF2B9C62B
+:10756000C2F86C57F20C848375E3F22E34614FE558
+:1075700071FFEAED9E0D496487AF3EF54C053CCFA7
+:10758000CC2FF90EC7EB765EA478C1E1F687CA105E
+:10759000DEE54D5A7E3EF9DC671E4F8F7B12E3BC61
+:1075A0006FA9C97FAFD979EA998D50DEBB79B92629
+:1075B00090DE7FE879BF95F7732DBEBA121CFE7579
+:1075C000BE7A3889F8A709F82AF3DFE7AB9AD56BBA
+:1075D000087E73F34BC6E6C3FECFA85D49C84F676C
+:1075E000C6DD4C74EEEA1408FE8A1C57C6A7E6F303
+:1075F000FBE82AD1B399EC48598E7F059E23C2F748
+:107600008DF6CFD2D18EFEAA6DC155CF7DB00E3D85
+:10761000228C9BE9A80C7D9EAFB1A7625E71BEC8AB
+:10762000EDE7D0E7B7E72B71781EB7C59F1090A79D
+:10763000E2848D4546A3FE13BC6120979D6DB79EE5
+:1076400055A1FF067EE1C7C17628FB3840AF5F69D0
+:10765000BFD72AAB711E955FEE4EF85064DE003D39
+:107660003EC917C6BC01EB0EF92BD0A6A1FB9E04A8
+:10767000920B8837CC87EA6B1FD784F5B31A8EC775
+:10768000BE83E097F1B80C93F2FDE73CDB7E3E0B46
+:10769000E56CE879AB5F394FF4E1687BE8A240E73D
+:1076A0009F79569575EDF3BFB1F77C16E2EFACDA32
+:1076B000978FFE579FC6978578A87E95CBF37F1549
+:1076C0000E4A7BC5060D8F130A26F2230BA50B1459
+:1076D00007E83BC6E300D5EDBB489E0E76F0784C3C
+:1076E0008DD85D1487F18BDA535D28CF06E3B95F3F
+:1076F00006F3DB28CF2155D683AA81A43920D71ED3
+:1077000019A207EE0F9E41FED5E03C1E07E561651C
+:107710008533B42BCE213F437BD9AAE4F548E767F4
+:10772000DC2373503EBE9DF58F6A8ADFBD1E6E92CC
+:10773000C88E9530C778084E43E7704B3CD18729F7
+:10774000767138B305F4ABD198EF24BFFA38BF9FF8
+:10775000ABB981F3137B85F39373ED1B9AF880F932
+:107760007E25F393624FCE7AFD1FC4970FE7DA9E12
+:1077700040BE0C475988F3C547521EB5F21E8772AA
+:107780001F69E890FDF862899ED7B4490CEFE5586F
+:10779000BC91F20A8AD916CAB79CC53C53795E8F50
+:1077A000EFD129F07CF6EB522EE6A1813D4DF7DBBF
+:1077B0004561F634CCD3EA150519AE1EEB9C007D6D
+:1077C000F67E3EF757A74A02E9B1818470B253664C
+:1077D000CE7796E27E957E5A91EB339887EC2CE635
+:1077E0001EC8C27B55E61DC8C2FB56A5DFBCD7C369
+:1077F0006B492F328F755EC03AA7F379BCF30BBC8F
+:107800001F07795223DFC3164ADF6E437F6B45277C
+:10781000BF7FEC15933FC03C3317C019F17A1EF0BF
+:107820006A43FD6367361BF2CFF8916EE49F9A7D41
+:1078300002C37CBDEA766D13C685AAD5BE58A4E7FF
+:107840008D6DEF6B909E6BF05E763C8E6772BCDC4C
+:107850004479BF3526C6EFF5DAAEFF00E376CE6396
+:107860005C8B3A55EF513C00E536AE57D5DA42FE17
+:10787000BF8379C9FF773407D3CD603C8FE787F2A8
+:10788000C9E97C73107FCCDCCEF9631EE6731B68FC
+:1078900038C55F67C6C7915DE21FC7F16093CEAF81
+:1078A000433BA63F45A07CFCFE30D75AB48F5CE931
+:1078B000DCAEE97FED052BBDF7A3735B7F8CF93C54
+:1078C000B2DD3B73C3569514B09F991D3CDED81FA3
+:1078D000C6CA0F12DEEDD7213E7CB92567F231BE54
+:1078E000A31978770AC683441E1F0D3D875D8E6BF2
+:1078F0001C67FCFD2865DFB31313B93C636EA2A3BC
+:107900002E39BF5BC9D751C6DF324150EED1B89F87
+:107910002458AEFA5E1ADED7609E2BDED760F93BA4
+:10792000391F16EF6BB0FEA29C0F8BF735D88EF780
+:1079300035586F95F361F1BE06EB785F83E52B72E6
+:107940003EEC71DC2AE5F16D7C0AE9A20B796D94BD
+:10795000BFDE1B1D521F15DCBF375A08AE8F12A8A1
+:10796000BF69C2C6A730FF7893922FC5CC46B4C377
+:107970002AC2F9FB1AA9067BEC04F4F38B77ED45D8
+:107980007F1EF89BDE9F2B885E504AEF97C46819D4
+:10799000CAA3DB27D8474F80F1C78ECD48DB4A7298
+:1079A000524FF7ECBD3FBB3192E27A6F494C8225D2
+:1079B000A765E4AEB5427D9A4120FA85F96E2A5159
+:1079C000FC4C986746C762AB8ACB0713DACB85922B
+:1079D0006309AEB322419F8B72F888D59E81FB511B
+:1079E000E05D346A591ADA455D6AF307189F75BD80
+:1079F000A366E85729713CA5DF93D669F9B8BF990A
+:107A000019A96B73707E60369477360D6BC6FDD9FD
+:107A1000C470A19EE4975985F2207F02A79BE96676
+:107A20006E1F7B35665534FAF561D362F05EB74B55
+:107A3000C6F33119CFC7653CE33D57818ADF7361D7
+:107A400089F75C5886E6A32DCF2FB14D20780F24FF
+:107A500005E6B3CD92DF97000AA1F7D49C721CF320
+:107A60004B59EE34E695DCCAC779689E2A398E7781
+:107A70005E1D7C6FA88CF38F6754CEBD89CB6B16CF
+:107A8000A9E179BFD73117E615CF7D3981E2507D65
+:107A90006ED1A506BCCF055E4779C65EE6FE2E8B8D
+:107AA000E77C33777F1CF5AB97E3A9CEE8EE747CD7
+:107AB000AFA34FE62FA57EF03B9E97E4CC81BA8121
+:107AC000DE23A1F339E776A74741BD4FD08B485F4E
+:107AD000CE26FEBC47E63F678A3C9F7C1EA6F32469
+:107AE000213EFA3B5F4EC2F7103719BC4BB9FCF789
+:107AF000A693DC66DE74CC6F3A2F784E62BEF1AD91
+:107B00006D29A5986F7F5EED7906EBB3DBD2785DCA
+:107B10006839690A7C3ED29384F9C8B7B6A59662E3
+:107B20003EF2F9912DCF445902EAEA974EE273CD25
+:107B30008369A5989F3C5BEB3E568774F37B4E5F51
+:107B4000FA7D074E237CAADAB9FD3E7DDF810B2F3B
+:107B5000A17E3E60A4BC8275139209DFF5EDCF6E65
+:107B6000467AEB6B51133F6C6A7EFF99DF503F2DD5
+:107B70008559666B3D560CC994B41DBA1BF7353B4D
+:107B8000DCF325D6174FBC89F6317B04E7EBA51350
+:107B9000734A914FFB0EECFB05EAB3D99160D8E232
+:107BA0007E5ED0137E2AF78F2BC0B8409FB1BB0CEE
+:107BB000E7AFFE9D96E71FEC8F9B8E7182FF9CC006
+:107BC000F3312A6ED89284FA567CE5F9BDBFC1F82C
+:107BD000E6EFF474DF5313CDEDBD4AA9317F39E1EF
+:107BE0006FD75ECC5BE97B5E4FF7AF151893B3E2BE
+:107BF0007BAC63293EFFEA3FFF5E8678289476EEF1
+:107C0000C5F62F77EB4584438FC6167933F2618F23
+:107C10009AFCCE0AB95ED13B82EF27DC5744F88B41
+:107C2000D99284FAB672C4AFEEC07DCF96B63C83CB
+:107C30007E0F7B564B770E679F07B8C1B8B37BD4D6
+:107C4000984903FB30AA905ECE0B5BCA9EC4F9F73D
+:107C5000F07EE7F55B089EAE3DD7335C0FFA31D47A
+:107C6000C7E785AD41ED67F73C9B857EE9B9DFCD80
+:107C700026FF54A173855F2A776B83F422498258CB
+:107C80008C5BCA3F938B1902E259E70EEEE87B92B8
+:107C9000F9C79F6B567B3500A30A2D5B8BF9CD0A84
+:107CA0003F5426DE5A8CE7AB141BD3D17EA9C8F50E
+:107CB00095215F9CD5335D3CF47B5BD65B95AD6BCA
+:107CC000E6A01D7CA5FDFC4596475FC97CF8559B49
+:107CD000DE1D78DF185AFEB58E994FA8FCF585B5E4
+:107CE0005AB2E595F9DED6781CE8AF554773F971BD
+:107CF00012FA37831CFB93ACEF16AD0AEEFFEE04CD
+:107D00009E4F59ADF1A5A3FE53E67F7B8289DB87A9
+:107D10002A5F3ACAABD071B32559DEBC2090BCA90A
+:107D20006C154ED1FB2408D2583F3C2B752E37E6FC
+:107D3000130D8787F87C190F12E6F170BEAA6CD676
+:107D4000DBF4304F55982F02ED2587D117817650FF
+:107D5000DF2B126B92D117A3CC9FE25F4F89535652
+:107D600078D436FD70EBC171D04F5E867F03285604
+:107D70004FE47C53DE164EEB31932F1FE9B67C6740
+:107D8000F0383CA729801FFBDA76C506FAEB0CF722
+:107D90004DF751A7886FFAFFF931BD075E29B2B5DB
+:107DA000784F794EE0EF83409DDE073927DF775625
+:107DB0007E6D0843FA39F79583F8B84FF0919C7BB4
+:107DC000B1CD4672AC4FED2339B76B6211AF47F9B5
+:107DD000CA506EBD38F1A7243FFA127C65F89ED2D6
+:107DE00066A58E2FCC811DD0D1B690E4C96C89E7F1
+:107DF00051B05D6A138F1371782F93E1C4D886DE7A
+:107E00003AF243D466B4973A272AF7421AFFF92583
+:107E10003F3FF531F3BE56E4CF7203C57DC0BE6A65
+:107E20007E09EDC005B1168CA787C24DB95F8C895C
+:107E3000FE6629E2E91DA37DECC43CBCCFF4919F12
+:107E400001D44EF67CF56B5AF237FBD5037B517E9D
+:107E5000B98DF67113019E0E4DF77A547117D4BE89
+:107E60002E34ED6721BD911CE1F4D697B98BBF0785
+:107E700022DF4F4E92F100FA8C35227D081CCF870D
+:107E8000DBF69F4079D3D79D4A723A949FCEB63D98
+:107E9000168172E343D0EFAE8078C0878B9FA57CBC
+:107EA00080F9980702E53D6B83CF37F8ED8FC92F36
+:107EB000649B03DA911E1B82EBA17041BAF406F1B8
+:107EC000818BF67D3FF21BC0A76A7A7735C261A825
+:107ED0003E17EA5240FD50483DA43F2BE1F6C3FD5A
+:107EE0001318CDEB18EDED253F7E1FCFEFAD07BD8D
+:107EF00046F503E1743F2DEE03BD15C3F516EA8B7D
+:107F0000AA886E8A5FF51DD0D2BDCA83ED9F25E198
+:107F1000F9811E294E53D5FE722CFAF7EB2698698B
+:107F20007ED08FB1941773A03D16FD11A5DD217A87
+:107F3000D2E5F70CB2507E28ED4EC99B4E79E54252
+:107F400077163E5F27CB1987087509EB8CCEE110B9
+:107F500038DFB37689E47C28DE56C9F40AF2218B37
+:107F6000F2395EE1F103451E54C872E510B667723E
+:107F7000FE3729F75278CF847C3F8C9CF85A8123B6
+:107F8000ABA5F8CEFD13CDBC2E8FA77979FC89E780
+:107F9000EDBD7A3E2B2513C79995F745FDF228D5FF
+:107FA0002F5F500EC4931C78501D0BE7AA7C46B07F
+:107FB000D4C3908AD23545D09D2D532D2FA2B81A07
+:107FC000E6E71A2EDF57281D454EE4F8AD14B91F19
+:107FD0005EB957A0FBA5736A7E6F07F286DE0F5865
+:107FE00056B0A608F9EFBE18A726D05FBED6FC4B48
+:107FF0001B82EBCB6AD714C50DC3E795ABB6768D64
+:108000006497CF57616F2C8A355FDEAEECFB9C5EC8
+:10801000D9E774F5C84078CC5F533412CA65BA7F8B
+:10802000171EFCDCE7DAB55ECA572D5D43F7C4B70F
+:108030005CAA0D8AB35E6BBE0AE6A67B902BED3F71
+:10804000B47408DE5E8C2B31E0AF3DC467C03701ED
+:10805000EBC5CBF43A149F285F3C06FD53665F3CAA
+:1080600026303E115AE29B3322E58AB8A8043E2C02
+:10807000B30C030FA5FFD1893CCE1A3F91D3F1A8D1
+:10808000D9553B5E6214D7E941F97BA5F74CFE2236
+:10809000EFEF07BF6732239CF7EBD49B30FED3DFB3
+:1080A000F90DC587FBD719E6F37B07034B80E75D26
+:1080B000F1E39B02E3C0AB26713B24DCCAED9D9A41
+:1080C0000CF5D5E34B99C6A1F812D91B99E174DFE1
+:1080D000D2D7F605E9B7FE8E3C13DE8BF475BB0DE7
+:1080E000C86F35FFFC7FB1A887FB3A3EA5BCB4BE84
+:1080F0006F3FA37CB58D72DEE0A13639DFABDB6C60
+:10810000C4F6FEE2BF1761BF4D72E98F2FF0F898F9
+:10811000522AF18300FFF93BD4537B4C1B1FC554FB
+:1081200099CAB02D24BFC07F8E46BDE18F2B98E346
+:10813000868BC304C615D2543CAE8025C615D2D258
+:10814000785C01EB1857C012E30AD88E7105AC6356
+:108150005C01EB1857C03AC615B0C4B802B67F2907
+:10816000BFE7D10F828BC73D0D24F757627E33C026
+:108170006F6527BFBF5AB947A27B617CCF03F5DF8C
+:1081800065793BAD72DE8E672BDD07D61C902C889F
+:10819000227C1FC4958EF93B0347311E54D32258CD
+:1081A000D698B17D3EED636347DE07A5D8BE476D27
+:1081B00011CD444F1C9F8D825B8F7CD5B187E257D8
+:1081C00005719D94EF5FD32C308CBBCED3723FD919
+:1081D00029416B0EDDAB921DEDD47693FF52F59CD9
+:1081E000600E7CEFBB66E2459213CA7DF552FE88B5
+:1081F000393D7AF392203D6BE37957F827ECC72994
+:10820000E777931D1260172DC57B6C6C97BEA5F7A1
+:108210004D9CE0E08E10AE9D7755D9D1B21EF3B5DE
+:108220007E68FE55E124F9DE3A9BBF4752FCF89286
+:108230007D0760BDC12D5AB2536E9F60BF6D521E47
+:10824000E619D828EE72B4534F7ED6275BAF0F8A5B
+:10825000BB144AD751DC63855A20FD7DC46A9F3B1D
+:1082600009E87246F1BD146F99116F243E56E8F08B
+:10827000496BC94F70DE15E3F977980AB5ECE7341E
+:108280009F9CCFA5E0A9B05E70E3F72C16330BBD21
+:108290003FB008C0877151E5FB1F8B18CFAF50E886
+:1082A0006AC55681E88ABEBC10F0BD8445F83D1011
+:1082B000D07FF76AB9FD9B28F27BF2C44D3C8FE278
+:1082C0003E66A7FC9165487D12E9D7D77CD06E0F3A
+:1082D000BF2E89DBF7E6389C7FF17135E50717C6BD
+:1082E000DD9E6E273D5F40F91382F76EE9FB1BAF01
+:1082F000263F83F3278EAAB9DC0178929FD585F4B7
+:108300004AF11E3B95C7EBCAA99C22BF1F16FA5E15
+:10831000437FE7CB2D38BEB0C66041F85FF13DC06A
+:10832000B0ABBFFFE694F3EB12C59E5C33C2E36BC8
+:108330008305E15118D749EF89A5CAF33F9C5BB289
+:1083400009F1698B602E5C1FEF69B6007C8BF040F1
+:1083500002C6D13D367CCF66A05330513EF56572E2
+:1083600074EB3ACC53A949134C18AF2D0ADB5218C1
+:108370000BF317A524D377766ADA781CB60F4A4E2A
+:108380000753DC92C0C7AA62317ECFF1E8CBB53F7C
+:108390003D29CFDF3E5BE6B3FE8E2F781EF1B5E3BD
+:1083A000B4BBE9FB1C4C4FEFAFD30FF635FBC6D186
+:1083B00014AF55E868B039AE09E9A845D613A5A5AC
+:1083C000EFA9D18E68CCB337231CCA965C5C174BDF
+:1083D000E71C3E4EA6E4DF87C6C902E5EDFF46DE98
+:1083E000FD89BA5A2ADFAD5B4565779D8B9E07E80C
+:1083F0008B2308BF1F106F7D7BD230F156A6334709
+:1084000092BE05BEE7F1ED90F82AF0BB18C0EF333D
+:108410003AA2EED980F64883C682F7CD98FFBCD247
+:1084200040F2E1FD49C3C65915F819282E3BC8F49E
+:10843000398887E919A92A119EFF6D921014E74423
+:10844000BEC17322DF60897CA352F9F9E6690DA3EE
+:10845000EF94A17DE022FB404FF85DBF06E40AD413
+:10846000EF65A620B9722144AE8023F3337A5FAC66
+:1084700043CB3609FEFCCFE9505CCA1946CE78B82A
+:108480009C191DE6799EBEB3501D46F9C5C0EF4448
+:10849000674737F2BCBD25AC84D61D46DED07B3E97
+:1084A000F78E1838F914F4BFF76103D939EB139636
+:1084B000E6FF77E4CD9F2771783C81DF73505DED57
+:1084C0007B0E9B05BC8F5DB1906523BE95EF39C4D3
+:1084D000C118F27BFFF5EF398C983C12BFE7E00A38
+:1084E000FA9E43DC15BEE7306AB27161E0F71C46C4
+:1084F0004D1EB130F87B0EC685F89DB2FFC1EF3935
+:10850000A44FCEBBFC7B0E374E36FFA0EF39803D2B
+:108510009B89E34FE4D8C66399289F3BF4FDE5E3CC
+:10852000F23D6497682FC5B228C2A5A276D16DC569
+:10853000F26DD1733FB6035F4C4478153D967D03D1
+:108540007E972551EBA1BCF227ADB64938FF6BB938
+:10855000B6C9F83C34DE5F2F9F0FF6730BF60BCDD8
+:108560001F53E8E2AEC95C0ECD93CBA9F5C3BFC7DC
+:108570003F6F32BF4FBED6BE61BF77E07ACAFED929
+:1085800096C556DC0FECF74EDC27ECB7044B66883B
+:108590000E7A0FF8727A75C9FB62742E908FB33F12
+:1085A000E1F62895E92A7714DA0DA31E7047E17EDB
+:1085B00047350EE8F17D90DFBA06F4683FFC76F5AA
+:1085C000801EDB7F6BE3F9DAA1F36F9FCCFD91F4A2
+:1085D000A903347E0CFCDD4DFEC14014DA6DE9E5E3
+:1085E0004734AE147A4F6DF62741769399F87B8C19
+:1085F000DC36E60191213D8CD9C1781E63410CE93E
+:10860000B94A1DEF5AF9C0FD22D2D13837EC3B8070
+:10861000FEAEDFAE1A0C7EAFD74BE3AAE425C05EF8
+:108620000B7AEE643CBF74942C8FD05EC4EFD939C2
+:10863000CB8FD077A6C08E0B998FBE7930944F59CF
+:10864000ADB3BFE63353BE6250BFA577FF663DFAB8
+:10865000B5E5A55B35E4172F69598FA5C3F19E26B3
+:108660008E917D19D41FECCBA0FA65FB0CD947F590
+:10867000FD17D7C70DB32ED0C156A413850E8EAAF1
+:108680003DE3D04F3DEA0CB3F0F71D3CF45D9A2674
+:10869000F9BDF45DFF39DDCAF365395DC0F81D3FF2
+:1086A0008C8EEAA9BFF21DAF6B958A1C1CFACE8D89
+:1086B00086B9285E39CB4872AE46F6FFAA9798C8AD
+:1086C0001E51F8BA5AE539B51EFBC51879FE9B8ACA
+:1086D000D1F7AB7AC45194CF4D3FACCF4AA5FBAC98
+:1086E000D87A8F17E71DB85DA0EFB9158473B95A12
+:1086F0002896389E85E74744FE5D81A7517E4898BD
+:1087000047C1BF37302597BF3F10CFF877DB98CAF6
+:108710001CF29D36391E7AEDEFB4F1EF92CDE7F7FA
+:10872000720D5125A5CBF1F9821BE8F9C1EF521F5B
+:10873000B1E2FE2A94EFB4717BBF614E063D7F55D6
+:1087400030AF413DE17A805DE93B6D7AE4FB80EF3B
+:10875000B3BD87F8BAD6F7D994EF0F1C5D70C32369
+:108760007B391CBD78EF5533CB18E4AFFF17313C94
+:108770009ED2C05600000000000000000000000073
+:088780000408350000000000B0
+:00000001FF
diff --git a/firmware/bnx2x-e1h-4.8.53.0.fw.ihex b/firmware/bnx2x-e1h-4.8.53.0.fw.ihex
new file mode 100644
index 00000000000..48d7612907e
--- /dev/null
+++ b/firmware/bnx2x-e1h-4.8.53.0.fw.ihex
@@ -0,0 +1,12028 @@
+:10000000000039D8000000600000063000003A40CF
+:100010000000191C000040780000009C0000599866
+:10002000000082E400005A38000000D40000DD2007
+:100030000000C7CC0000DDF8000000780001A5C872
+:10004000000056980001A648000000C00001FCE82E
+:100050000000F1D40001FDB0000000040002EF88B0
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:1001800002040014000000FF02040018000000FF39
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200204203C00000000DE
+:100240000204204000000034020420440000003575
+:10025000060420480000001C020420B80000000131
+:10026000060420BC0000005F0204223807FFFFFFE5
+:100270000204223C0000003F0204224007FFFFFF6F
+:10028000020422440000000F010422480000000084
+:100290000104224C00000000010422500000000074
+:1002A0000104225400000000010422580000000054
+:1002B0000104225C00000000010422600000000034
+:1002C0000104226400000000010422680000000014
+:1002D0000104226C000000000104227000000000F4
+:1002E00001042274000000000104227800000000D4
+:1002F0000104227C000000000C042000000003E840
+:100300000A042000000000010B0420000000000A85
+:1003100002050044000000200205004800000032F1
+:10032000020500900215002002050094021500202D
+:1003300002050098000000300205009C0810000033
+:10034000020500A000000033020500A400000030F8
+:10035000020500A800000031020500AC0000000208
+:10036000020500B000000005020500B40000000610
+:10037000020500B800000002020500BC00000002F7
+:10038000020500C000000000020500C400000005D6
+:10039000020500C800000002020500CC00000002B7
+:1003A000020500D000000002020500D40000000198
+:1003B00002050114000000010205011C00000001FB
+:1003C00002050120000000020205020400000001F5
+:1003D0000205020C0000004002050210000000406F
+:1003E0000205021C0000002002050220000000138C
+:1003F0000205022400000020060502400000000A59
+:1004000004050280002000000205005000000007E3
+:100410000205005400000007020500580000000813
+:100420000205005C000000080205006000000001F9
+:100430000605006400000003020500D80000000665
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C000020500E00000000D020500E80000000742
+:1004D000020500F000000007020500F80000000718
+:1004E000020500E40000002D020500EC00000027DA
+:1004F000020500F400000027020500FC00000027B0
+:10050000020500E00000001D020500E800000017E1
+:10051000020500F000000017020500F800000017B7
+:10052000020500E40000003D020500EC0000003779
+:10053000020500F400000037020500FC000000374F
+:10054000020500E00000004D020500E80000004741
+:10055000020500F000000047020500F80000004717
+:10056000020500E40000006D020500EC00000067D9
+:10057000020500F400000067020500FC00000067AF
+:10058000020500E00000005D020500E800000057E1
+:10059000020500F000000057020500F800000057B7
+:1005A000020500E40000007D020500EC0000007779
+:1005B000020500F400000077020500FC000000774F
+:1005C0000406100002000020020600DC000000010A
+:1005D000010600D80000000004060200000302200B
+:1005E000020600DC00000000010600B80000000068
+:1005F000010600C800000000010600BC0000000069
+:10060000010600CC0000000007180400009B000059
+:1006100008180798000D0223071C0000325E000036
+:10062000071C800035960C98071D00001AEA19FE79
+:10063000081D43D057860225011800000000000065
+:10064000011800040000000001180008000000006C
+:100650000118000C0000000001180010000000004C
+:100660000118001400000000021800200000000122
+:1006700002180024000000020218002800000003F5
+:100680000218002C000000000218003000000004D6
+:1006900002180034000000010218003800000000B9
+:1006A0000218003C00000001021800400000000495
+:1006B0000218004400000000021800480000000179
+:1006C0000218004C00000003021800500000000057
+:1006D0000218005400000001021800580000000435
+:1006E0000218005C00000000021800600000000119
+:1006F00002180064000000030218006800000000F7
+:100700000218006C000000010218007000000004D4
+:1007100002180074000000000218007800000004B5
+:100720000218007C00000003061800800000000290
+:10073000021800A400003FFF021800A8000003FFF9
+:100740000218022400000000021802340000000019
+:100750000218024C00000000021802E4000000FF32
+:100760000618100000000400021B8BC000000001EE
+:10077000021B800000000034021B804000000018B3
+:10078000021B80800000000C021B80C000000020C3
+:100790000C1B83000007A1200A1B83000000013806
+:1007A0000B1B830000001388021B83C0000001F4B0
+:1007B000021B1480000000010A1B148000000000CE
+:1007C000061A1000000002B3041A1ACC0001022716
+:1007D000061AA020000000C8061AA00000000002AF
+:1007E000021A1AD000000000061A1AD800000004ED
+:1007F000061A367800000006061A3670000000025D
+:10080000061A500000000002061A500800000004FA
+:10081000061A501800000004061A502800000004B0
+:10082000061A503800000004061A50480000000460
+:10083000061A505800000004061A50680000000410
+:10084000061A507800000002061A4000000000025C
+:10085000061A400800000002041A62C000200228A4
+:10086000061A20000000016C061AB00000000028E3
+:10087000061AB1400000000C061A32C00000001237
+:10088000061A335000000064061A810800000002B6
+:10089000061A25B00000016C061AB0A0000000285E
+:1008A000061AB1700000000C061A3308000000128E
+:1008B000061A34E000000064061A811000000002ED
+:1008C000021A2B6000000000061A3000000000022F
+:1008D000041A300800050248061A301C0000000700
+:1008E000061A31C000000008061A5000000000027D
+:1008F000061A508000000012061A40000000000294
+:10090000021A2B6400000000061A303800000002B2
+:10091000041A30400005024D061A3054000000074A
+:10092000061A31E000000008061A5010000000020C
+:10093000061A50C800000012061A40080000000203
+:10094000021A2B6800000000061A30700000000236
+:10095000041A307800050252061A308C0000000795
+:10096000061A320000000008061A5020000000029B
+:10097000061A511000000012041A4010000202571B
+:10098000021A2B6C00000000061A30A800000002BA
+:10099000041A30B000050259061A30C400000007DE
+:1009A000061A322000000008061A5030000000022B
+:1009B000061A515800000012041A40180002025E84
+:1009C000021A2B7000000000061A30E0000000023E
+:1009D000041A30E800050260061A30FC0000000727
+:1009E000061A324000000008061A504000000002BB
+:1009F000061A51A000000012041A402000020265ED
+:100A0000021A2B7400000000061A311800000002C0
+:100A1000041A312000050267061A3134000000076D
+:100A2000061A326000000008061A5050000000024A
+:100A3000061A51E800000012041A40280002026C55
+:100A4000021A2B7800000000061A31500000000244
+:100A5000041A31580005026E061A316C00000007B6
+:100A6000061A328000000008061A506000000002DA
+:100A7000061A523000000012041A403000020273BD
+:100A8000021A2B7C00000000061A318800000002C8
+:100A9000041A319000050275061A31A400000007FF
+:100AA000061A32A000000008061A5070000000026A
+:100AB000061A527800000012041A40380002027A26
+:100AC0000200A294071D29110200A2980000000054
+:100AD0000200A29C009C04240200A2A000000000CE
+:100AE0000200A2A4000002090200A270000000009F
+:100AF0000200A274000000000200A27000000000CA
+:100B00000200A274000000000200A27000000000B9
+:100B10000200A274000000000200A27000000000A9
+:100B20000200A27400000000020100B400000001F5
+:100B3000020100B800000001020100DC0000000119
+:100B40000201010000000001020101040000000197
+:100B50000201007C00300000020100840000002837
+:100B60000201008C000000000201013000000004BE
+:100B70000201025C000000010201032800000000E5
+:100B800002016080000000010201055400000030F5
+:100B9000020100C400000001020100CC00000001BD
+:100BA000020100F800000001020100F00000000155
+:100BB00002010080003000000201008800000028CF
+:100BC0000201009000000000020101340000000456
+:100BD000020102DC000000010201032C0000000001
+:100BE0000201608400000001020105640000003081
+:100BF000020100C800000001020100D00000000155
+:100C0000020100FC00000001020100F400000001EC
+:100C1000020C100000000020020C2008000002114D
+:100C2000020C200C00000200020C20100000020444
+:100C3000020C201C0000FFFF020C20200000FFFF20
+:100C4000020C20240000FFFF020C20280000FFFF00
+:100C5000020C2038000000C6020C203C00000000FE
+:100C6000020C204000000034020C2044000000353B
+:100C7000060C20480000001C020C20B800000001F7
+:100C8000060C20BC0000005F020C223807FFFFFFAB
+:100C9000020C223C0000003F020C224007FFFFFF35
+:100CA000020C22440000000F010C2248000000004A
+:100CB000010C224C00000000010C2250000000003A
+:100CC000010C225400000000010C2258000000001A
+:100CD000010C225C00000000010C226000000000FA
+:100CE000010C226400000000010C226800000000DA
+:100CF000010C226C00000000010C227000000000BA
+:100D0000010C227400000000010C22780000000099
+:100D1000010C227C000000000C0C2000000003E805
+:100D20000A0C2000000000010B0C20000000000A4B
+:100D3000020C400800000411020C400C00000400EA
+:100D4000020C401000000404020C401400000421B6
+:100D5000020C401C0000FFFF020C40200000FFFFBF
+:100D6000020C40240000FFFF020C40280000FFFF9F
+:100D7000020C403800000046020C403C0000000518
+:100D8000020C404000000034020C404400000035DA
+:100D9000020C404800000007060C404C0000005BBD
+:100DA000020C41B800000001060C41BC0000000329
+:100DB000020C41C800000001060C41CC0000001BE1
+:100DC000020C423807FFFFFF020C423C0000003FCC
+:100DD000020C424007FFFFFF020C42440000000FDC
+:100DE000010C424800000000010C424C00000000D1
+:100DF000010C425000000000010C425400000000B1
+:100E0000010C425800000000010C425C0000000090
+:100E1000010C426000000000010C42640000000070
+:100E2000010C426800000000010C426C0000000050
+:100E3000010C427000000000010C42740000000030
+:100E4000010C427800000000010C427C0000000010
+:100E5000010C4280000000000C0C4000000003E880
+:100E60000A0C4000000000010B0C40000000000ACA
+:100E7000020D004400000032020D008C021500201B
+:100E8000020D009002150020020D009408100000D1
+:100E9000020D009800000033020D009C00000002CB
+:100EA000020D00A000000000020D00A400000005DB
+:100EB000020D00A800000005060D00AC00000002B5
+:100EC000020D00B400000002020D00B80000000393
+:100ED000020D00BC00000002020D00C00000000175
+:100EE000020D00C800000002020D00CC000000024C
+:100EF000020D010800000001020D015C000000016C
+:100F0000020D016400000001020D016800000002F2
+:100F1000020D020400000001020D020C000000207E
+:100F2000020D021000000040020D021400000040FB
+:100F3000020D022000000003020D02240000001830
+:100F4000060D028000000012040D03000024027C44
+:100F5000020D004C00000001020D005000000002D4
+:100F6000020D005400000008020D005800000008A7
+:100F7000060D005C00000004020D00C40000000427
+:100F8000020D000400000001020D00080000000135
+:100F9000020D000C00000001020D00100000000115
+:100FA000020D001400000001020D001800000001F5
+:100FB000020D001C00000001020D002000000001D5
+:100FC000020D002400000001020D002800000001B5
+:100FD000020D002C00000001020D00300000000195
+:100FE000020D003400000001020D00380000000175
+:100FF000020D003C00000001020D01140000000978
+:10100000020D011C0000000A020D0124000000076F
+:10101000020D012C00000007020D01340000000C3D
+:10102000020D013C0000000B020D0144000000070E
+:10103000020D011800000029020D01200000002A05
+:10104000020D012800000027020D013000000027DA
+:10105000020D01380000002C020D01400000002BA1
+:10106000020D014800000027020D011400000019C4
+:10107000020D011C0000001A020D012400000017DF
+:10108000020D012C00000017020D01340000001CAD
+:10109000020D013C0000001B020D0144000000177E
+:1010A000020D011800000039020D01200000003A75
+:1010B000020D012800000037020D0130000000374A
+:1010C000020D01380000003C020D01400000003B11
+:1010D000020D014800000037020D01140000004914
+:1010E000020D011C0000004A020D0124000000470F
+:1010F000020D012C00000047020D01340000004CDD
+:10110000020D013C0000004B020D014400000047AD
+:10111000020D011800000069020D01200000006AA4
+:10112000020D012800000067020D01300000006779
+:10113000020D01380000006C020D01400000006B40
+:10114000020D014800000067020D01140000005963
+:10115000020D011C0000005A020D0124000000577E
+:10116000020D012C00000057020D01340000005C4C
+:10117000020D013C0000005B020D0144000000571D
+:10118000020D011800000079020D01200000007A14
+:10119000020D012800000077020D013000000077E9
+:1011A000020D01380000007C020D01400000007BB0
+:1011B000020D014800000077020E004C00000032D2
+:1011C000020E009402150020020E00980215002065
+:1011D000020E009C00000030020E00A0081000006B
+:1011E000020E00A400000033020E00A80000003030
+:1011F000020E00AC00000031020E00B00000000240
+:10120000020E00B400000004020E00B8000000004E
+:10121000020E00BC00000002020E00C0000000022E
+:10122000020E00C400000000020E00C80000000210
+:10123000020E00CC00000007020E00D000000002E9
+:10124000020E00D400000002020E00D800000001CF
+:10125000020E00E400000001020E01440000000143
+:10126000020E014C00000001020E015000000002BD
+:10127000020E020400000001020E020C00000040F9
+:10128000020E021000000040020E021C00000004CA
+:10129000020E022000000020020E02240000000EB8
+:1012A000020E02280000001B060E030000000012C0
+:1012B000040E0280001B02A0020E00540000001069
+:1012C000020E005800000007020E005C0000000F34
+:1012D000020E006000000010020E00640000000B0F
+:1012E000060E006800000003020E00DC0000000390
+:1012F000020E000400000001020E000800000001C0
+:10130000020E000C00000001020E0010000000019F
+:10131000020E001400000001020E0018000000017F
+:10132000020E001C00000001020E0020000000015F
+:10133000020E002400000001020E0028000000013F
+:10134000020E002C00000001020E0030000000011F
+:10135000020E003400000001020E003800000001FF
+:10136000020E003C00000001020E004000000001DF
+:10137000020E004400000001020E01100000000FE8
+:10138000020E01180000000E020E012000000000F5
+:10139000020E012800000000020E01140000002FC0
+:1013A000020E011C0000002E020E012400000000AD
+:1013B000020E012C00000000020E01100000001FB0
+:1013C000020E01180000001E020E012000000000A5
+:1013D000020E012800000000020E01140000003F70
+:1013E000020E011C0000003E020E0124000000005D
+:1013F000020E012C00000000020E01100000004F40
+:10140000020E01180000004E020E01200000000034
+:10141000020E012800000000020E01140000006FFF
+:10142000020E011C0000006E020E012400000000EC
+:10143000020E012C00000000020E01100000005FEF
+:10144000020E01180000005E020E012000000000E4
+:10145000020E012800000000020E01140000007FAF
+:10146000020E011C0000007E020E0124000000009C
+:10147000020E012C000000000730040000D2000022
+:10148000083007A8000B02BB0734000031B600008B
+:101490000734800036500C6E0735000037591A03A8
+:1014A00007358000286127DA0835FF40401802BD63
+:1014B00001300000000000000130000400000000C6
+:1014C00001300008000000000130000C00000000A6
+:1014D0000130001000000000013000140000000086
+:1014E0000230002000000001023000240000000251
+:1014F00002300028000000030230002C0000000031
+:10150000023000300000000402300034000000010E
+:1015100002300038000000000230003C00000001F2
+:1015200002300040000000040230004400000000CF
+:1015300002300048000000010230004C00000003AF
+:101540000230005000000000023000540000000192
+:1015500002300058000000040230005C000000006F
+:10156000023000600000000102300064000000034F
+:1015700002300068000000000230006C0000000132
+:10158000023000700000000402300074000000000F
+:1015900002300078000000040230007C00000003EC
+:1015A0000630008000000002023000A400003FFF6F
+:1015B000023000A8000003FF0230022400000000F7
+:1015C00002300234000000000230024C0000000033
+:1015D000023002E40000FFFF063020000000080097
+:1015E00002338BC000000001023380000000001AAB
+:1015F000023380400000004E023380800000001063
+:10160000023380C0000000200C3383000007A120BB
+:101610000A338300000001380B3383000000138875
+:10162000023383C0000001F40C3383801DCD6500BC
+:101630000A3383800004C4B40B338380004C4B40D6
+:101640000A331480000000000233148000000001FF
+:10165000063220000000010206328980000000C826
+:1016600006328960000000020632322800000004C1
+:10167000063232000000000904323224000102BFA9
+:1016800006323180000000200632500000000400C5
+:10169000063240000000000204324008000102C08F
+:1016A0000632400C0000000306326B6800000002A6
+:1016B00004326B70000202C106326B10000000029F
+:1016C000043274C0000202C30233080001000000AB
+:1016D00004330C00001002C50233080000000000B3
+:1016E00004330C40001002D506329000000000A028
+:1016F0000632950000000040063297000000003CD2
+:1017000006322450000000B406322AD00000000245
+:101710000632308000000020063280000000012CDC
+:101720000232323800000000063250000000002073
+:101730000632510000000020063252000000002056
+:101740000632530000000020063254000000002042
+:10175000063255000000002006325600000000202E
+:10176000063257000000002006325800000000201A
+:10177000063259000000002006325A000000002006
+:1017800006325B000000002006325C0000000020F2
+:1017900006325D000000002006325E0000000020DE
+:1017A00006325F000000002006326B780000005215
+:1017B00006326E080000000C06329280000000A085
+:1017C0000632960000000040063297F00000003C10
+:1017D00006322720000000B406322AD8000000029A
+:1017E0000632310000000020063284B00000012CD7
+:1017F0000232323C0000000006325080000000201F
+:101800000632518000000020063252800000002085
+:101810000632538000000020063254800000002071
+:10182000063255800000002006325680000000205D
+:101830000632578000000020063258800000002049
+:10184000063259800000002006325A800000002035
+:1018500006325B800000002006325C800000002021
+:1018600006325D800000002006325E80000000200D
+:1018700006325F800000002006326CC0000000527B
+:1018800006326E380000000C02322A3000000000E0
+:10189000063230000000000406324018000000024A
+:1018A00002322A340000000006323010000000042A
+:1018B000063240280000000202322A3800000000F0
+:1018C00006323020000000040632403800000002DA
+:1018D00002322A3C000000000632303000000004D2
+:1018E000063240480000000202322A400000000098
+:1018F000063230400000000406324058000000026A
+:1019000002322A4400000000063230500000000479
+:10191000063240680000000202322A48000000003F
+:1019200006323060000000040632407800000002F9
+:1019300002322A4C00000000063230700000000421
+:1019400006324088000000020720040000740000F6
+:1019500008200780001002E507240000322600005E
+:1019600007248000246E0C8A0824CBB064F002E7C0
+:101970000120000000000000012000040000000021
+:1019800001200008000000000120000C0000000001
+:1019900001200010000000000120001400000000E1
+:1019A00002200020000000010220002400000002AC
+:1019B00002200028000000030220002C000000008C
+:1019C000022000300000000402200034000000016A
+:1019D00002200038000000000220003C000000014E
+:1019E000022000400000000402200044000000002B
+:1019F00002200048000000010220004C000000030B
+:101A000002200050000000000220005400000001ED
+:101A100002200058000000040220005C00000000CA
+:101A200002200060000000010220006400000003AA
+:101A300002200068000000000220006C000000018D
+:101A4000022000700000000402200074000000006A
+:101A500002200078000000040220007C0000000347
+:101A60000620008000000002022000A400003FFFCA
+:101A7000022000A8000003FF022002240000000052
+:101A800002200234000000000220024C000000008E
+:101A9000022002E40000FFFF0620200000000800F2
+:101AA00002238BC000000001022380000000001010
+:101AB00002238040000000120223808000000030DA
+:101AC000022380C00000000E022383C0000001F446
+:101AD00002231480000000010A231480000000008B
+:101AE000062210000000004206227020000000C8FC
+:101AF0000622700000000002022211E8000000002F
+:101B000006223000000000C0062240700000008065
+:101B10000622528000000004062267000000010037
+:101B2000062290000000040004226B08002002E955
+:101B300002230800013FFFFF04230C0000100309EB
+:101B4000022308000000000004230C4000100319C9
+:101B500006228000000000A0062285000000004050
+:101B6000062287000000003C0622404000000006DC
+:101B700006228280000000A00622860000000040AD
+:101B8000062287F00000003C0622405800000006B4
+:101B9000022211480000000006223300000000026B
+:101BA00006226040000000300222114C00000000BC
+:101BB0000622330800000002062261000000003007
+:101BC0000222115000000000062233100000000223
+:101BD000062261C000000030022211540000000003
+:101BE0000622331800000002062262800000003046
+:101BF00002221158000000000622332000000002DB
+:101C000006226340000000300222115C0000000048
+:101C10000622332800000002062264000000003083
+:101C20000222116000000000062233300000000292
+:101C3000062264C00000003002221164000000008F
+:101C400006223338000000020622658000000030C2
+:101C50000216100000000020021700080000000219
+:101C60000217002C000000030217003C00000004D3
+:101C7000021700440000000802170048000000029C
+:101C80000217004C00000090021700500000009066
+:101C9000021700540080009002170058081400003A
+:101CA000021700600000008A021700640000008034
+:101CB00002170068000000900217006C000000800E
+:101CC000021700700000000602170078000007D01D
+:101CD0000217007C0000076C02170038007C10041B
+:101CE000021700040000000F061640240000000246
+:101CF000021640700000001C02164208000000019D
+:101D000002164210000000010216422000000001ED
+:101D100002164228000000010216423000000001B5
+:101D20000216423800000001021642600000000264
+:101D30000C16401C0003D0900A16401C0000009CAA
+:101D40000B16401C000009C40216403000000008B9
+:101D5000021640340000000C02164038000000104B
+:101D6000021640440000002002164000000000015E
+:101D7000021640D8000000010216400800000001D1
+:101D80000216400C00000001021640100000000185
+:101D90000216424000000000021642480000000007
+:101DA00006164270000000020216425000000000B9
+:101DB0000216425800000000061642800000000291
+:101DC00002166008000004240216600C00000410D3
+:101DD00002166010000004140216601C0000FFFFD1
+:101DE000021660200000FFFF021660240000FFFFC3
+:101DF000021660280000FFFF021660380000002075
+:101E00000216603C00000020021660400000003412
+:101E100002166044000000350216604800000023EE
+:101E20000216604C000000240216605000000025DD
+:101E300002166054000000260216605800000027B9
+:101E40000216605C00000029021660600000002A93
+:101E5000021660640000002B021660680000002C6F
+:101E60000216606C0000002D061660700000005223
+:101E7000021661B800000001061661BC0000001FD8
+:101E80000216623807FFFFFF0216623C0000003FA7
+:101E90000216624007FFFFFF021662440000000FB7
+:101EA00001166248000000000116624C00000000AC
+:101EB000011662500000000001166254000000008C
+:101EC00001166258000000000116625C000000006C
+:101ED000011662600000000001166264000000004C
+:101EE00001166268000000000116626C000000002C
+:101EF000011662700000000001166274000000000C
+:101F000001166278000000000116627C00000000EB
+:101F10000C166000000003E80A16600000000001D3
+:101F20000B1660000000000A021680400000000648
+:101F30000216804400000005021680480000000AD6
+:101F40000216804C000000050216805400000002BA
+:101F5000021680CC00000004021680D000000004AD
+:101F6000021680D400000004021680D8000000048D
+:101F7000021680DC00000004021680E0000000046D
+:101F8000021680E400000004021680E8000000044D
+:101F90000216880400000004021680300000007C55
+:101FA000021680340000003D021680380000003F19
+:101FB0000216803C0000009C021680F00000000722
+:101FC000061680F4000000050216880C01010101CC
+:101FD00002168108000000000216810C00000004B7
+:101FE0000216811000000004021681140000000295
+:101FF000021688100801200402168118000000054E
+:102000000216811C00000005021681200000000558
+:1020100002168124000000050216882C20081001F9
+:1020200002168128000000080216812C000000061C
+:102030000216813000000007021681340000000003
+:1020400002168830010101200616813800000004C4
+:1020500002168834010101010216814800000000C7
+:102060000216814C0000000402168150000000049A
+:10207000021681540000000202168838080120046C
+:1020800002168158000000050216815C0000000560
+:102090000216816000000005021681640000000540
+:1020A0000216883C20081001021681680000000812
+:1020B0000216816C00000006021681700000000705
+:1020C00002168174000000010216884001010120FF
+:1020D00002168178000000010216817C00000001D8
+:1020E00002168180000000010216818400000001B8
+:1020F00002168844010101010216818800000001D6
+:102100000216818C00000004021681900000000479
+:10211000021681940000000202168848080120047B
+:1021200002168198000000050216819C000000053F
+:10213000021681A000000005021681A4000000051F
+:102140000216881420081001021681A80000000859
+:10215000021681AC00000006021681B000000007E4
+:10216000021681B400000001021688180101012046
+:10217000021681B800000001021681BC00000001B7
+:10218000021681C000000001021681C40000000197
+:102190000216881C01010101021681C8000000011D
+:1021A000021681CC00000004021681D00000000459
+:1021B000021681D4000000020216882008012004C3
+:1021C000021681D800000005021681DC000000051F
+:1021D000021681E000000005021681E400000005FF
+:1021E0000216882420081001021681E80000000869
+:1021F000021681EC00000006021681F000000007C4
+:102200000216E40C000000000216882801010120DB
+:102210000616E410000000040216E00001010101AE
+:102220000216E420000000000216E424000000046E
+:102230000216E428000000040216E42C000000024C
+:102240000216E004080120040216E4300000000534
+:102250000216E434000000050216E4380000000510
+:102260000216E43C000000050216E00820081001F8
+:102270000216E440000000080216E44400000006D4
+:102280000216E448000000070216E44C00000000BB
+:102290000216E00C010101200616E45000000004C3
+:1022A0000216E010010101010216E46000000000C6
+:1022B0000216E464000000040216E4680000000452
+:1022C0000216E46C000000020216E014080120046B
+:1022D0000216E470000000050216E4740000000518
+:1022E0000216E478000000050216E47C00000005F8
+:1022F0000216E018200810010216E4800000000811
+:102300000216E484000000060216E48800000007BC
+:102310000216E48C000000010216E01C01010120FD
+:102320000216E490000000010216E494000000018F
+:102330000216E498000000010216E49C000000016F
+:102340000216E020010101010216E4A000000001D4
+:102350000216E4A4000000040216E4A80000000431
+:102360000216E4AC000000020216E024080120047A
+:102370000216E4B0000000050216E4B400000005F7
+:102380000216E4B8000000050216E4BC00000005D7
+:102390000216E028200810010216E4C00000000820
+:1023A0000216E4C4000000060216E4C8000000079C
+:1023B0000216E4CC000000010216E02C010101200D
+:1023C0000216E4D0000000010216E4D4000000016F
+:1023D0000216E4D8000000010216E4DC000000014F
+:1023E0000216E030010101010216E4E000000001E4
+:1023F0000216E4E4000000040216E4E80000000411
+:102400000216E4EC000000020216E0340801200489
+:102410000216E4F0000000050216E4F400000005D6
+:102420000216E4F8000000050216E4FC00000005B6
+:102430000216E038200810010216E500000000082E
+:102440000216E504000000060216E5080000000779
+:102450000216E03C0101012002168240003F003FCD
+:1024600002168244000000000216E524003F003FEF
+:102470000216E52800000000021682480000000055
+:102480000216824C003F003F0216E52C00000000BF
+:102490000216E530003F003F0216825001000100A5
+:1024A00002168254010001000216E5340100010009
+:1024B0000216E538010001000616825800000002ED
+:1024C0000216E53C000000000216E5400000000096
+:1024D0000216826000C000C00216826400C000C004
+:1024E0000216E54400C000C00216E54800C000C066
+:1024F000021682681E001E000216826C1E001E005C
+:102500000216E54C1E001E000216E5501E001E00BD
+:1025100002168270400040000216827440004000A3
+:102520000216E554400040000216E5584000400005
+:1025300002168278800080000216827C8000800073
+:102540000216E55C800080000216E56080008000D5
+:1025500002168280200020000216828420002000C3
+:102560000216E564200020000216E5682000200025
+:1025700006168288000000020216E56C00000000CA
+:102580000216E570000000000216829000000000B4
+:1025900002168294000000000216E574000000009C
+:1025A0000216E57800000000021682980000000084
+:1025B0000216829C000000000216E57C000000006C
+:1025C0000216E58000000000021682A00000000054
+:1025D000021682A400000001061682A80000000A6C
+:1025E000021681F400000C08021681F80000004079
+:1025F000021681FC0000010002168200000000208B
+:1026000002168204000000170216820800000080F3
+:102610000216820C00000200021682100000000068
+:102620000216821801FF01FF0216821401FF01FF4A
+:102630000216E51001FF01FF0216E50C01FF01FF84
+:102640000216823C00000013021680900000013F39
+:102650000216806000000140021680640000014004
+:10266000061680680000000202168070000000C09C
+:1026700006168074000000070216809C00000048C7
+:10268000021680A000000048061680A40000000288
+:10269000021680AC00000048061680B0000000075B
+:1026A000021682380000800002168234000025E401
+:1026B0000216809400007FFF0216822000070007A8
+:1026C0000216821C000700070216E5180007000723
+:1026D0000216E51400070007021682280000000019
+:1026E00002168224FFFFFFFF0216E5200000000013
+:1026F0000216E51CFFFFFFFF0216E6BC000000000B
+:102700000216E6C0000000020216E6C40000000146
+:102710000216E6C8000000030216E6CC0000000422
+:102720000216E6D0000000060216E6D400000005FE
+:102730000216E6D800000007021680EC000000FF39
+:1027400002140000000000010214000C000000014F
+:1027500002140040000000010214004400007FFF4A
+:102760000214000C00000000021400000000000031
+:102770000214006C000000000214000400000001BC
+:1027800002140030000000010214000400000000E8
+:102790000214005C000000000214000800000001A8
+:1027A00002140034000000010214000800000000C0
+:1027B0000214006000000000020200580000003215
+:1027C000020200A003150020020200A4031500204D
+:1027D000020200A801000030020200AC0810000054
+:1027E000020200B000000033020200B4000000301A
+:1027F000020200B800000031020200BC0000000329
+:10280000020200C000000006020200C40000000333
+:10281000020200C800000003020200CC0000000217
+:10282000020200D000000000020200D400000002FA
+:10283000020200DC00000000020200E000000006CE
+:10284000020200E400000004020200E800000002AE
+:10285000020200EC00000002020200F00000000191
+:10286000020200FC0000000602020120000000003D
+:102870000202013400000002020201B00000000167
+:102880000202020C0000000102020214000000011A
+:10289000020202180000000202020404000000010B
+:1028A0000202040C0000004002020410000000407C
+:1028B0000202041C000000040202042000000020A8
+:1028C000020204240000000202020428000000208A
+:1028D000060205000000001204020480001F032904
+:1028E000020200600000000F020200640000000706
+:1028F000020200680000000B0202006C0000000EE3
+:10290000020200700000000E0602007400000003C6
+:10291000020200F4000000040202000400000001B2
+:1029200002020008000000010202000C0000000189
+:102930000202001000000001020200140000000169
+:1029400002020018000000010202001C0000000149
+:102950000202002000000001020200240000000129
+:1029600002020028000000010202002C0000000109
+:1029700002020030000000010202003400000001E9
+:1029800002020038000000010202003C00000001C9
+:1029900002020040000000010202004400000001A9
+:1029A00002020048000000010202004C0000000189
+:1029B000020200500000000102020108000000C8ED
+:1029C0000202011800000002020201C4000000001F
+:1029D000020201CC00000000020201D4000000024B
+:1029E000020201DC00000002020201E4000000FF1C
+:1029F000020201EC000000FF0202010000000000E2
+:102A00000202010C000000C80202011C00000002CA
+:102A1000020201C800000000020201D00000000014
+:102A2000020201D800000002020201E000000002E0
+:102A3000020201E8000000FF020201F0000000FFB6
+:102A4000020201040000000002020108000000C8A8
+:102A50000202011800000002020201C4000000008E
+:102A6000020201CC00000000020201D400000002BA
+:102A7000020201DC00000002020201E4000000FF8B
+:102A8000020201EC000000FF020201000000000051
+:102A90000202010C000000C80202011C000000023A
+:102AA000020201C800000000020201D00000000084
+:102AB000020201D800000002020201E00000000250
+:102AC000020201E8000000FF020201F0000000FF26
+:102AD000020201040000000002020108000000C818
+:102AE0000202011800000002020201C400000000FE
+:102AF000020201CC00000000020201D4000000022A
+:102B0000020201DC00000002020201E4000000FFFA
+:102B1000020201EC000000FF0202010000000000C0
+:102B20000202010C000000C80202011C00000002A9
+:102B3000020201C800000000020201D000000000F3
+:102B4000020201D800000002020201E000000002BF
+:102B5000020201E8000000FF020201F0000000FF95
+:102B6000020201040000000002020108000000C887
+:102B70000202011800000002020201C4000000006D
+:102B8000020201CC00000000020201D40000000299
+:102B9000020201DC00000002020201E4000000FF6A
+:102BA000020201EC000000FF020201000000000030
+:102BB0000202010C000000C80202011C0000000219
+:102BC000020201C800000000020201D00000000063
+:102BD000020201D800000002020201E0000000022F
+:102BE000020201E8000000FF020201F0000000FF05
+:102BF00002020104000000000728040000BD0000DC
+:102C0000082807A8000B0348072C00003406000022
+:102C1000072C800037960D02072D00003BC31AE8F1
+:102C2000072D8000382629D9072E0000124537E3EA
+:102C3000082E22203BBC034A0128000000000000AF
+:102C40000128000400000000012800080000000026
+:102C50000128000C00000000012800100000000006
+:102C600001280014000000000228002000000001DC
+:102C700002280024000000020228002800000003AF
+:102C80000228002C00000000022800300000000490
+:102C90000228003400000001022800380000000073
+:102CA0000228003C0000000102280040000000044F
+:102CB0000228004400000000022800480000000133
+:102CC0000228004C00000003022800500000000011
+:102CD00002280054000000010228005800000004EF
+:102CE0000228005C000000000228006000000001D3
+:102CF00002280064000000030228006800000000B1
+:102D00000228006C0000000102280070000000048E
+:102D1000022800740000000002280078000000046F
+:102D20000228007C0000000306280080000000024A
+:102D3000022800A400003FFF022800A8000003FFB3
+:102D400002280224000000000228023400000000D3
+:102D50000228024C00000000022802E40000FFFFED
+:102D60000628200000000800022B8BC00000000194
+:102D7000022B800000000000022B804000000018A1
+:102D8000022B80800000000C022B80C00000006637
+:102D90000C2B83000007A1200A2B830000000138C0
+:102DA0000B2B830000001388022B83C0000001F46A
+:102DB0000C2B8340000001F40A2B8340000000002C
+:102DC0000B2B8340000000050A2B83800004C4B451
+:102DD0000C2B83801DCD65000A2B148000000000A1
+:102DE0000B2B8380004C4B40022B14800000000111
+:102DF000062A29C800000004042A29D80002034C2E
+:102E0000062A208000000048062A9020000000C802
+:102E1000062A900000000002062A21A80000008671
+:102E2000062A200000000020022A23C8000000001B
+:102E3000042A23D00002034E042A249800040350DD
+:102E4000022A2C2000000000022A2C1000000000A2
+:102E5000042A2C0800020354022A3010000000014A
+:102E6000062A404000000010042A400000100356CB
+:102E7000062A6AC000000002062A6B000000000457
+:102E8000042A840800020366022B080000000000E8
+:102E9000042B0C0000100368022B08000100000046
+:102EA000042B0C4000080378022B080002000000ED
+:102EB000042B0C6000080380062AC000000000FC00
+:102EC000062A24A800000014062A25480000002431
+:102ED000062A266800000024062A2788000000240D
+:102EE000062A28A800000024062AA00000000028C6
+:102EF000062AA1400000000C042A29E000020388F1
+:102F0000022A300000000001062A502000000002C2
+:102F1000062A503000000002062A5000000000027D
+:102F2000062A501000000002022A52080000000188
+:102F3000042A6AC80002038A062A6B1000000042B5
+:102F4000062A6D2000000004062AC3F0000000FCE1
+:102F5000062A24F800000014062A25D800000024C0
+:102F6000062A26F800000024062A2818000000245B
+:102F7000062A293800000024062AA0A00000002804
+:102F8000062AA1700000000C042A29E80002038C24
+:102F9000022A300400000001062A50280000000226
+:102FA000062A503800000002062A500800000002DD
+:102FB000062A501800000002022A520C00000001EC
+:102FC000042A6AD00002038E062A6C180000004210
+:102FD000062A6D3000000004022AC7E0000000004D
+:102FE000042A29F000100390062A50480000000E21
+:102FF000022AC7E400000000042A2A30001003A0BF
+:10300000062A50800000000E022AC7E800000000D7
+:10301000042A2A70001003B0062A50B80000000EDF
+:10302000022AC7EC00000000042A2AB0001003C0E6
+:10303000062A50F00000000E022AC7F0000000002F
+:10304000042A2AF0001003D0062A51280000000E9E
+:10305000022AC7F400000000042A2B30001003E00D
+:10306000062A51600000000E022AC7F80000000086
+:10307000042A2B70001003F0062A51980000000E5D
+:10308000022AC7FC00000000042A2BB00010040034
+:10309000062A51D00000000E0210100800000001A6
+:1030A0000210105000000001021010000003D000B8
+:1030B000021010040000003D091018000200041066
+:1030C0000910110000280610061011A000000018B9
+:1030D00006102400000000E00210201C0000000088
+:1030E0000210202000000001021020C00000000299
+:1030F000021020040000000102102008000000015E
+:1031000009103C0000050638091038000005063D8E
+:10311000091038200005064206104C00000001008E
+:1031200002104028000000100210404400003FFF41
+:103130000210405800280000021040840084924A87
+:1031400002104058000000000210800000001080B3
+:10315000021080AC00000000021080380000001057
+:103160000210810000000000061081200000000213
+:1031700002108008000002B502108010000000005C
+:10318000061082000000004A021081080001FFFFC3
+:1031900006108140000000020210800000001A802A
+:1031A0000610900000000024061091200000004A44
+:1031B000061093700000004A061095C00000004AF7
+:1031C0000210800400001080021080B00000000196
+:1031D0000210803C0000001002108104000000007A
+:1031E00006108128000000020210800C000002B5C9
+:1031F0000210801400000000061084000000004A45
+:103200000210810C0001FFFF06108148000000023F
+:103210000210800400001A80061090900000002424
+:10322000061092480000004A061094980000004AD8
+:10323000061096E80000004A02108000000010808E
+:10324000021080AC00000002021080380000001064
+:103250000210810000000000061081200000000222
+:1032600002108008000002B502108010000000006B
+:10327000061082000000004A021081080001FFFFD2
+:1032800006108140000000020210800000001A8039
+:103290000610900000000024061091200000004A53
+:1032A000061093700000004A061095C00000004A06
+:1032B0000210800400001080021080B000000003A3
+:1032C0000210803C00000010021081040000000089
+:1032D00006108128000000020210800C000002B5D8
+:1032E0000210801400000000061084000000004A54
+:1032F0000210810C0001FFFF06108148000000024F
+:103300000210800400001A80061090900000002433
+:10331000061092480000004A061094980000004AE7
+:10332000061096E80000004A02108000000010809D
+:10333000021080AC00000004021080380000001071
+:103340000210810000000000061081200000000231
+:1033500002108008000002B502108010000000007A
+:10336000061082000000004A021081080001FFFFE1
+:1033700006108140000000020210800000001A8048
+:103380000610900000000024061091200000004A62
+:10339000061093700000004A061095C00000004A15
+:1033A0000210800400001080021080B000000005B0
+:1033B0000210803C00000010021081040000000098
+:1033C00006108128000000020210800C000002B5E7
+:1033D0000210801400000000061084000000004A63
+:1033E0000210810C0001FFFF06108148000000025E
+:1033F0000210800400001A80061090900000002443
+:10340000061092480000004A061094980000004AF6
+:10341000061096E80000004A0210800000001080AC
+:10342000021080AC0000000602108038000000107E
+:103430000210810000000000061081200000000240
+:1034400002108008000002B5021080100000000089
+:10345000061082000000004A021081080001FFFFF0
+:1034600006108140000000020210800000001A8057
+:103470000610900000000024061091200000004A71
+:10348000061093700000004A061095C00000004A24
+:103490000210800400001080021080B000000007BD
+:1034A0000210803C000000100210810400000000A7
+:1034B00006108128000000020210800C000002B5F6
+:1034C0000210801400000000061084000000004A72
+:1034D0000210810C0001FFFF06108148000000026D
+:1034E0000210800400001A80061090900000002452
+:1034F000061092480000004A061094980000004A06
+:10350000061096E80000004A021205B00000000113
+:103510000212049000E383400212051400003C10E4
+:103520000212066C0000000102120670000000008A
+:1035300002120494FFFFFFFF02120498FFFFFFFF37
+:103540000212049CFFFFFFFF021204A0FFFFFFFF17
+:10355000021204A4FFFFFFFF021204A8FFFFFFFFF7
+:10356000021204ACFFFFFFFF021204B0FFFFFFFFD7
+:10357000021204BCFFFFFFFF021204C0FFFFFFFFA7
+:10358000021204C4FFFFFFFF021204C8FFFFFFFF87
+:10359000021204CCFFFFFFFF021204D0FFFFFFFF67
+:1035A000021204D8FFFFFFFF021204DCFFFFFFFF3F
+:1035B000021204E0FFFFFFFF021204E4FFFFFFFF1F
+:1035C000021204E8FFFFFFFF021204ECFFFFFFFFFF
+:1035D000021204F0FFFFFFFF021204F4FFFFFFFFDF
+:1035E000021204F8FFFFFFFF021204FCFFFFFFFFBF
+:1035F00002120500FFFFFFFF02120504FFFFFFFF9D
+:1036000002120508FFFFFFFF0212050CFFFFFFFF7C
+:1036100002120510FFFFFFFF021204D4FF802000FA
+:10362000021204B4F0005000021204B8F00080004E
+:1036300002120390000000080212039C0000000820
+:10364000021203A000000008021203A400000002FE
+:10365000021203BC00000004021203C000000005B7
+:10366000021203C400000004021203D00000000094
+:103670000212036C00000001021203680000003F08
+:10368000021201BC00000040021201C00000180834
+:10369000021201C400000803021201C8000008035E
+:1036A000021201CC00000040021201D00000000311
+:1036B000021201D400000803021201D8000008031E
+:1036C000021201DC00000803021201E00001000305
+:1036D000021201E400000803021201E800000803DE
+:1036E000021201EC00000003021201F000000003CE
+:1036F000021201F400000003021201F800000003AE
+:10370000021201FC0000000302120200000000038C
+:10371000021202040000000302120208000000036B
+:103720000212020C0000000302120210000000034B
+:10373000021202140000000302120218000000032B
+:103740000212021C0000000302120220000000030B
+:1037500002120224000000030212022800002403C7
+:103760000212022C0000002F021202300000000999
+:103770000212023400000019021202380000018413
+:103780000212023C00000183021202400000030604
+:103790000212024400000019021202480000000652
+:1037A0000212024C0000030602120250000003063F
+:1037B00002120254000003060212025800000C8696
+:1037C0000212025C000003060212026000000306FF
+:1037D00002120264000000060212026800000006E5
+:1037E0000212026C000000060212027000000006C5
+:1037F00002120274000000060212027800000006A5
+:103800000212027C00000006021202800000000684
+:103810000212028400000006021202880000000664
+:103820000212028C00000006021202900000000644
+:103830000212029400000006021202980000000624
+:103840000212029C00000006021202A00000030601
+:10385000021202A400000013021202A800000006D7
+:10386000021202B000001004021202B400001004A0
+:103870000212032400106440021203280010644066
+:10388000021205B400000001021201B000000001A4
+:103890000600A000000000160200A0EC5554000035
+:1038A0000200A0F0555555550200A0F400005555F2
+:1038B0000200A0F8F00000000200A0FC5554000037
+:1038C0000200A100555555550200A10400005555B0
+:1038D0000200A108F00000000200A18C5554000075
+:1038E0000200A190555555550200A1940000555570
+:1038F0000200A198F00000000200A19C000000005E
+:103900000200A1A0000100000200A1A400005014C8
+:103910000200A1A8000000000200A45C00000C004E
+:103920000200A61C000000030200A06CFF5C000067
+:103930000200A070FFF55FFF0200A0740000FFFF0F
+:103940000200A078F00003E00200A07C000000006C
+:103950000200A0800000A0000600A0840000000576
+:103960000200A0980FE000000600A09C00000007E5
+:103970000200A0B8000004000600A0BC0000000384
+:103980000200A0C8000010000600A0CC0000000348
+:103990000200A0D8000040000600A0DC00000003E8
+:1039A0000200A0E8000100000600A22C00000004B4
+:1039B0000200A10CFF5C00000200A110FFF55FFFF8
+:1039C0000200A1140000FFFF0200A118F00003E0B4
+:1039D0000200A11C000000000200A1200000A000C5
+:1039E0000600A124000000050200A1380FE000003D
+:1039F0000600A13C000000070200A15800000800DA
+:103A00000600A15C000000030200A1680000200085
+:103A10000600A16C000000030200A17800008000F5
+:103A20000600A17C000000030200A1880002000043
+:103A30000600A23C0000000400000000000000009E
+:103A40000000003100000000000000000000000045
+:103A50000000000000000000000000000000000066
+:103A600000000000000000000000000000310032F3
+:103A70000000000000000000000000000000000046
+:103A80000000000000000000000000000000000036
+:103A9000000000000000000000320056000000009E
+:103AA0000000000000000000000000000000000016
+:103AB0000000000000000000000000000000000006
+:103AC000000000000056008C000000000000000014
+:103AD000008C009000900094009400980098009C46
+:103AE000009C00A000A000A400A400A800A800ACB6
+:103AF00000AC00B100B100B300B300B5000000009D
+:103B000000000000000000000000000000000000B5
+:103B100000000000000000000000000000B50100EF
+:103B2000010001060106010C010C01140114011C25
+:103B3000011C01240124012C012C01340134013C1D
+:103B4000013C01440144014C000000000000000061
+:103B50000000000000000000000000000000000065
+:103B60000000000000000000000000000000000055
+:103B70000000000000000000000000000000000045
+:103B80000000000000000000000000000000000035
+:103B90000000000000000000000000000000000025
+:103BA0000000000000000000000000000000000015
+:103BB0000000000000000000000000000000000005
+:103BC00000000000000000000000000000000000F5
+:103BD00000000000000000000000000000000000E5
+:103BE00000000000000000000000000000000000D5
+:103BF0000000000000000000014C01510000000026
+:103C000000000000015101520152015301530154BF
+:103C100001540155015501560156015701570158EC
+:103C200001580159000000000000000000000000E1
+:103C30000000000000000000000000000000000084
+:103C40000000000000000000000000000000000074
+:103C50000159015E015E016A016A017600000000FF
+:103C60000000000000000000000000000000000054
+:103C70000000000000000000000000000000000044
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA0000000000000000000017601770000000025
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000000000000177019A0000000000000000D1
+:103CE00000000000000000000000000000000000D4
+:103CF00000000000000000000000000000000000C4
+:103D0000019A01C200000000000000000000000055
+:103D100000000000000000000000000000000000A3
+:103D200000000000000000000000000001C201F3DC
+:103D3000000000000000000001F301FA01FA020196
+:103D4000020102080208020F020F02160216021DEB
+:103D5000021D02240224022B022B02630000000039
+:103D600000000000026302670267026B026B026FD1
+:103D7000026F0273027302770277027B027B027F7B
+:103D8000027F0283028302D102D102EB02EB030520
+:103D9000030503080308030B030B030E030E0311B3
+:103DA00003110314031403170317031A031A031D43
+:103DB000031D035E035E0362036203660366036919
+:103DC0000369036C036C036F036F03720372037563
+:103DD000037503780378037B037B037E037E037FF5
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E00000000000000000000037F0391000000009C
+:103E100000000000000000000000000000000000A2
+:103E20000000000000000000000000000000000092
+:103E300000000000039103A603A603A903A903AC95
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E600003AC03D9000000000000000000000000C7
+:103E70000000000000000000000000000000000042
+:103E800000000000000000000000000003D904DC76
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB000000000000000000004DC04E304E304E769
+:103EC00004E704EB00000000000000000000000018
+:103ED00000000000000000000000000000000000E2
+:103EE0000000000004EB052B0000000000000000B3
+:103EF000052B05340534053D053D05460546054FB2
+:103F0000054F0558055805610561056A056A057381
+:103F1000057305CB05CB05DD05DD05EF05EF05F2E6
+:103F200005F205F505F505F805F805FB05FB05FEA9
+:103F300005FE060106010604060406070607060E2E
+:103F40000000000000000000000000000000000071
+:103F50000000000000000000000000000000000061
+:103F60000000000000000000060E06140000000023
+:103F70000000000000000000000000000000000041
+:103F80000000000000000000000000000000000031
+:103F900000000000061406170000000000000000EA
+:103FA0000000000000000000000000000000000011
+:103FB0000000000000000000000000000000000001
+:103FC0000617061D000000000000000000000000B1
+:103FD00000000000000000000000000000000000E1
+:103FE00000000000000000000000000000000000D1
+:103FF0000000000000000000061D062C062C063BF9
+:10400000063B064A064A06590659066806680677B8
+:1040100006770686068606950695070600000000C8
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:1040400000000000070607190719072A072A073B7F
+:104050000000000000000000000000000000000060
+:104060000000000000000000000000000000000050
+:10407000000000000000000000010000000204C079
+:104080000003098000040E4000051300000617C05D
+:1040900000071C800008214000092600000A2AC0F1
+:1040A000000B2F80000C3440000D3900000E3DC085
+:1040B000000F42800010474000114C00001250C019
+:1040C0000013558000145A4000155F00001663C0AD
+:1040D0000017688000186D4000197200001A76C041
+:1040E000001B7B80001C8040001D8500001E89C0D5
+:1040F000001F8E8000209340000020000000400040
+:1041000000006000000080000000A0000000C0006F
+:104110000000E0000001000000012000000140005C
+:1041200000016000000180000001A0000001C0004B
+:104130000001E00000020000000220000002400038
+:1041400000026000000280000002A0000002C00027
+:104150000002E00000030000000320000003400014
+:1041600000036000000380000003A0000003C00003
+:104170000003E000000400000004200000044000F0
+:1041800000046000000480000004A0000004C000DF
+:104190000004E000000500000005200000054000CC
+:1041A00000056000000580000005A0000005C000BB
+:1041B0000005E000000600000006200000064000A8
+:1041C00000066000000680000006A0000006C00097
+:1041D0000006E00000070000000720000007400084
+:1041E00000076000000780000007A0000007C00073
+:1041F0000007E00000080000000820000008400060
+:1042000000086000000880000008A0000008C0004E
+:104210000008E0000009000000092000000940003B
+:1042200000096000000980000009A0000009C0002A
+:104230000009E000000A0000000A2000000A400017
+:10424000000A6000000A8000000AA000000AC00006
+:10425000000AE000000B0000000B2000000B4000F3
+:10426000000B6000000B8000000BA000000BC000E2
+:10427000000BE000000C0000000C2000000C4000CF
+:10428000000C6000000C8000000CA000000CC000BE
+:10429000000CE000000D0000000D2000000D4000AB
+:1042A000000D6000000D8000000DA000000DC0009A
+:1042B000000DE000000E0000000E2000000E400087
+:1042C000000E6000000E8000000EA000000EC00076
+:1042D000000EE000000F0000000F2000000F400063
+:1042E000000F6000000F8000000FA000000FC00052
+:1042F000000FE0000010000000102000001040003F
+:1043000000106000001080000010A0000010C0002D
+:104310000010E0000011000000112000001140001A
+:1043200000116000001180000011A0000011C00009
+:104330000011E000001200000012200000124000F6
+:1043400000126000001280000012A0000012C000E5
+:104350000012E000001300000013200000134000D2
+:1043600000136000001380000013A0000013C000C1
+:104370000013E000001400000014200000144000AE
+:1043800000146000001480000014A0000014C0009D
+:104390000014E0000015000000152000001540008A
+:1043A00000156000001580000015A0000015C00079
+:1043B0000015E00000160000001620000016400066
+:1043C00000166000001680000016A0000016C00055
+:1043D0000016E00000170000001720000017400042
+:1043E00000176000001780000017A0000017C00031
+:1043F0000017E0000018000000182000001840001E
+:1044000000186000001880000018A0000018C0000C
+:104410000018E000001900000019200000194000F9
+:1044200000196000001980000019A0000019C000E8
+:104430000019E000001A0000001A2000001A4000D5
+:10444000001A6000001A8000001AA000001AC000C4
+:10445000001AE000001B0000001B2000001B4000B1
+:10446000001B6000001B8000001BA000001BC000A0
+:10447000001BE000001C0000001C2000001C40008D
+:10448000001C6000001C8000001CA000001CC0007C
+:10449000001CE000001D0000001D2000001D400069
+:1044A000001D6000001D8000001DA000001DC00058
+:1044B000001DE000001E0000001E2000001E400045
+:1044C000001E6000001E8000001EA000001EC00034
+:1044D000001EE000001F0000001F2000001F400021
+:1044E000001F6000001F8000001FA000001FC00010
+:1044F000001FE000002000000020200000204000FD
+:1045000000206000002080000020A0000020C000EB
+:104510000020E000002100000021200000214000D8
+:1045200000216000002180000021A0000021C000C7
+:104530000021E000002200000022200000224000B4
+:1045400000226000002280000022A0000022C000A3
+:104550000022E00000230000002320000023400090
+:1045600000236000002380000023A0000023C0007F
+:104570000023E0000024000000242000002440006C
+:1045800000246000002480000024A0000024C0005B
+:104590000024E00000250000002520000025400048
+:1045A00000256000002580000025A0000025C00037
+:1045B0000025E00000260000002620000026400024
+:1045C00000266000002680000026A0000026C00013
+:1045D0000026E00000270000002720000027400000
+:1045E00000276000002780000027A0000027C000EF
+:1045F0000027E000002800000028200000284000DC
+:1046000000286000002880000028A0000028C000CA
+:104610000028E000002900000029200000294000B7
+:1046200000296000002980000029A0000029C000A6
+:104630000029E000002A0000002A2000002A400093
+:10464000002A6000002A8000002AA000002AC00082
+:10465000002AE000002B0000002B2000002B40006F
+:10466000002B6000002B8000002BA000002BC0005E
+:10467000002BE000002C0000002C2000002C40004B
+:10468000002C6000002C8000002CA000002CC0003A
+:10469000002CE000002D0000002D2000002D400027
+:1046A000002D6000002D8000002DA000002DC00016
+:1046B000002DE000002E0000002E2000002E400003
+:1046C000002E6000002E8000002EA000002EC000F2
+:1046D000002EE000002F0000002F2000002F4000DF
+:1046E000002F6000002F8000002FA000002FC000CE
+:1046F000002FE000003000000030200000304000BB
+:1047000000306000003080000030A0000030C000A9
+:104710000030E00000310000003120000031400096
+:1047200000316000003180000031A0000031C00085
+:104730000031E00000320000003220000032400072
+:1047400000326000003280000032A0000032C00061
+:104750000032E0000033000000332000003340004E
+:1047600000336000003380000033A0000033C0003D
+:104770000033E0000034000000342000003440002A
+:1047800000346000003480000034A0000034C00019
+:104790000034E00000350000003520000035400006
+:1047A00000356000003580000035A0000035C000F5
+:1047B0000035E000003600000036200000364000E2
+:1047C00000366000003680000036A0000036C000D1
+:1047D0000036E000003700000037200000374000BE
+:1047E00000376000003780000037A0000037C000AD
+:1047F0000037E0000038000000382000003840009A
+:1048000000386000003880000038A0000038C00088
+:104810000038E00000390000003920000039400075
+:1048200000396000003980000039A0000039C00064
+:104830000039E000003A0000003A2000003A400051
+:10484000003A6000003A8000003AA000003AC00040
+:10485000003AE000003B0000003B2000003B40002D
+:10486000003B6000003B8000003BA000003BC0001C
+:10487000003BE000003C0000003C2000003C400009
+:10488000003C6000003C8000003CA000003CC000F8
+:10489000003CE000003D0000003D2000003D4000E5
+:1048A000003D6000003D8000003DA000003DC000D4
+:1048B000003DE000003E0000003E2000003E4000C1
+:1048C000003E6000003E8000003EA000003EC000B0
+:1048D000003EE000003F0000003F2000003F40009D
+:1048E000003F6000003F8000003FA000003FC0008C
+:1048F000003FE000003FE00100000000000001FF79
+:104900000000020000007FF800007FF800000704AC
+:104910000000350000000001FFFFFFFFFFFFFFFF69
+:10492000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:10493000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:10494000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:10495000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:10496000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:10497000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:10498000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:10499000FFFFFFFFFFFFFFFFFFFFFFFF0000000023
+:1049A000FFFFFFFF00000000FFFFFFFFFFFFFFFF13
+:1049B00000000000FFFFFFFF00000000FFFFFFFFFF
+:1049C000FFFFFFFF00000000FFFFFFFF00000000EF
+:1049D000FFFFFFFF0000000300BEBC20FFFFFFFF42
+:1049E00000000000FFFFFFFF00000000FFFFFFFFCF
+:1049F0000000000300BEBC20FFFFFFFF000000001E
+:104A0000FFFFFFFF00000000FFFFFFFF00000003AB
+:104A100000BEBC20FFFFFFFF00000000FFFFFFFF04
+:104A200000000000FFFFFFFF0000000300BEBC20ED
+:104A3000FFFFFFFF00000000FFFFFFFF000000007E
+:104A4000FFFFFFFF0000000300BEBC20FFFFFFFFD1
+:104A500000000000FFFFFFFF00000000FFFFFFFF5E
+:104A60000000000300BEBC2000002000000040C089
+:104A700000006180000082400000A3000000C3C06D
+:104A80000000E4800001054000012600000146C04E
+:104A900000016780000188400001A9000001C9C031
+:104AA0000001EA8000020B4000022C0000024CC012
+:104AB00000026D8000028E400002AF000002CFC0F5
+:104AC0000002F0800003114000033200000352C0D6
+:104AD00000037380000394400003B5000003D5C0B9
+:104AE0000003F6800004174000043800000458C09A
+:104AF0000004798000049A400000800000010380D7
+:104B00000001870000020A8000028E00000311806D
+:104B1000000395000004188000049C0000051F801D
+:104B20000005A300000626800006AA0000072D80CD
+:104B30000007B100000834800008B80000093B807D
+:104B40000009BF00000A4280000AC600000B49802D
+:104B5000000BCD00000C5080000CD400000D5780DD
+:104B6000000DDB0000007FF800007FF800000487E4
+:104B700000001500000019000000002800100000CF
+:104B80000000000000000000FFFFFFFF40000000E9
+:104B90004000000040000000400000004000000015
+:104BA0004000000040000000400000004000000005
+:104BB00040000000400000004000000040000000F5
+:104BC00040000000400000004000000040000000E5
+:104BD00040000000400000004000000040000000D5
+:104BE00040000000400000004000000040000000C5
+:104BF00040000000400000004000000040000000B5
+:104C000040000000400000004000000000007FF86D
+:104C100000007FF8000003E000001500FFFFFFFF29
+:104C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
+:104C3000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:104C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
+:104C5000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:104C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
+:104C7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:104C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
+:104C9000FFFFFFFFFFFFFFFFFFFFFFFF40000000E0
+:104CA0004000000040000000400000004000000004
+:104CB00040000000400000004000000040000000F4
+:104CC00040000000400000004000000040000000E4
+:104CD00040000000400000004000000040000000D4
+:104CE00040000000400000004000000040000000C4
+:104CF00040000000400000004000000040000000B4
+:104D000040000000400000004000000040000000A3
+:104D100040000000400000004000000000001000C3
+:104D2000000020800000310000004180000052009F
+:104D30000000628000007300000083800000940087
+:104D40000000A4800000B5000000C5800000D6006F
+:104D50000000E6800000F700000107800001180055
+:104D600000012880000139000001498000015A003B
+:104D700000016A8000017B0000018B8000019C0023
+:104D80000001AC800001BD000001CD800001DE000B
+:104D90000001EE800001FF0000007FF800007FF8B6
+:104DA0000000023E0000350010000000000028ADA9
+:104DB000000000000001000100350804CCCCCCC587
+:104DC000FFFFFFFFFFFFFFFF7058103C00000000D7
+:104DD000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3D
+:104DE000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2D
+:104DF000CCCC0201CCCCCCCCCCCC0201CCCCCCCC1D
+:104E0000CCCC0201CCCCCCCCCCCC0201CCCCCCCC0C
+:104E100000000000FFFFFFFF400000004000000016
+:104E20004000000040000000400000004000000082
+:104E30004000000040000000400000004000000072
+:104E40004000000040000000400000004000000062
+:104E50004000000040000000400000004000000052
+:104E60004000000040000000400000004000000042
+:104E70004000000040000000400000004000000032
+:104E80004000000040000000400000004000000022
+:104E90004000000040000000000E0232011600D663
+:104EA000001000000000000000720236012300F331
+:104EB00000100000000000000000FFFF00000000E4
+:104EC0000000FFFF000000000000FFFF00000000E6
+:104ED0000000FFFF000000000000FFFF00000000D6
+:104EE0000000FFFF000000000000FFFF00000000C6
+:104EF0000000FFFF000000000000FFFF00000000B6
+:104F00000000FFFF000000000000FFFF00000000A5
+:104F10000000FFFF000000000000FFFF0000000095
+:104F20000000FFFF000000000000FFFF0000000085
+:104F30000000FFFF000000000000FFFF0000000075
+:104F40000000FFFF000000000000FFFF0000000065
+:104F50000000FFFF000000000000FFFF0000000055
+:104F60000000FFFF000000000000FFFF0000000045
+:104F70000000FFFF000000000000FFFF0000000035
+:104F80000000FFFF000000000000FFFF0000000025
+:104F90000000FFFF000000000000FFFF0000000015
+:104FA0000000FFFF000000000000FFFF0000000005
+:104FB0000000FFFF000000000000FFFF00000000F5
+:104FC0000000FFFF000000000000FFFF00000000E5
+:104FD0000000FFFF000000000000FFFF00000000D5
+:104FE0000000FFFF000000000000FFFF00000000C5
+:104FF0000000FFFF000000000000FFFF00000000B5
+:105000000000FFFF000000000000FFFF00000000A4
+:105010000000FFFF000000000000FFFF0000000094
+:105020000000FFFF000000000000FFFF0000000084
+:105030000000FFFF000000000000FFFF0000000074
+:105040000000FFFF000000000000FFFF0000000064
+:105050000000FFFF000000000000FFFF0000000054
+:105060000000FFFF000000000000FFFF0000000044
+:105070000000FFFF000000000000FFFF0000000034
+:105080000000FFFF000000000000FFFF0000000024
+:105090000000FFFF000000000000FFFF0000000014
+:1050A0000000FFFF000000000000FFFF0000000004
+:1050B0000000FFFF00000000FFFFFFF3320FFFFFC3
+:1050C0000C30C30CC30C30C3CF3CF300F3CF3CF324
+:1050D0000000CF3CCDCDCDCDFFFFFFF130EFFFFF86
+:1050E0000C30C30CC30C30C3CF3CF300F3CF3CF304
+:1050F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFF0
+:105100000C30C30CC30C30C3CF3CF300F3CF3CF3E3
+:105110000002CF3CCDCDCDCDFFFFF4061CBFFFFF7D
+:105120000C30C305C30C30C3CF300014F3CF3CF3B5
+:105130000004CF3CCDCDCDCDFFFFFFF2304FFFFFC0
+:105140000C30C30CC30C30C3CF3CF300F3CF3CF3A3
+:105150000008CF3CCDCDCDCDFFFFFFFA302FFFFFB4
+:105160000C30C30CC30C30C3CF3CF300F3CF3CF383
+:105170000010CF3CCDCDCDCDFFFFFFF731EFFFFFCE
+:105180000C30C30CC30C30C3CF3CF300F3CF3CF363
+:105190000020CF3CCDCDCDCDFFFFFFF5302FFFFF61
+:1051A0000C30C30CC30C30C3CF3CF300F3CF3CF343
+:1051B0000040CF3CCDCDCDCDFFFFFFF3310FFFFF42
+:1051C0000C30C30CC30C30C3CF3CF300F3CF3CF323
+:1051D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF64
+:1051E0000C30C30CC30C30C3CF3CF300F3CF3CF303
+:1051F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEF
+:105200000C30C30CC30C30C3CF3CF300F3CF3CF3E2
+:105210000002CF3CCDCDCDCDFFFFF4061CBFFFFF7C
+:105220000C30C305C30C30C3CF300014F3CF3CF3B4
+:105230000004CF3CCDCDCDCDFFFFFFF2304FFFFFBF
+:105240000C30C30CC30C30C3CF3CF300F3CF3CF3A2
+:105250000008CF3CCDCDCDCDFFFFFFFA302FFFFFB3
+:105260000C30C30CC30C30C3CF3CF300F3CF3CF382
+:105270000010CF3CCDCDCDCDFFFFFFF730EFFFFFCE
+:105280000C30C30CC30C30C3CF3CF300F3CF3CF362
+:105290000020CF3CCDCDCDCDFFFFFFF5304FFFFF40
+:1052A0000C30C30CC30C30C3CF3CF300F3CF3CF342
+:1052B0000040CF3CCDCDCDCDFFFFFFF331EFFFFF61
+:1052C0000C30C30CC30C30C3CF3CF300F3CF3CF322
+:1052D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF63
+:1052E0000C30C30CC30C30C3CF3CF300F3CF3CF302
+:1052F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEE
+:105300000C30C30CC30C30C3CF3CF300F3CF3CF3E1
+:105310000002CF3CCDCDCDCDFFFFF4061CBFFFFF7B
+:105320000C30C305C30C30C3CF300014F3CF3CF3B3
+:105330000004CF3CCDCDCDCDFFFFFFF2304FFFFFBE
+:105340000C30C30CC30C30C3CF3CF300F3CF3CF3A1
+:105350000008CF3CCDCDCDCDFFFFFFFA302FFFFFB2
+:105360000C30C30CC30C30C3CF3CF300F3CF3CF381
+:105370000010CF3CCDCDCDCDFFFFFF97056FFFFFD8
+:105380000C30C30CC30C30C3CF3CC000F3CF3CF394
+:105390000020CF3CCDCDCDCDFFFFFFF5310FFFFF7E
+:1053A0000C30C30CC30C30C3CF3CF300F3CF3CF341
+:1053B0000040CF3CCDCDCDCDFFFFFFF3320FFFFF3F
+:1053C0000C30C30CC30C30C3CF3CF300F3CF3CF321
+:1053D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF62
+:1053E0000C30C30CC30C30C3CF3CF300F3CF3CF301
+:1053F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFED
+:105400000C30C30CC30C30C3CF3CF300F3CF3CF3E0
+:105410000002CF3CCDCDCDCDFFFFF4061CBFFFFF7A
+:105420000C30C305C30C30C3CF300014F3CF3CF3B2
+:105430000004CF3CCDCDCDCDFFFFFFF2304FFFFFBD
+:105440000C30C30CC30C30C3CF3CF300F3CF3CF3A0
+:105450000008CF3CCDCDCDCDFFFFFF8A042FFFFF4D
+:105460000C30C30CC30C30C3CF3CC000F3CF3CF3B3
+:105470000010CF3CCDCDCDCDFFFFFF9705CFFFFF77
+:105480000C30C30CC30C30C3CF3CC000F3CF3CF393
+:105490000020CF3CCDCDCDCDFFFFFFF5310FFFFF7D
+:1054A0000C30C30CC30C30C3CF3CF300F3CF3CF340
+:1054B0000040CF3CCDCDCDCDFFFFFFF3316FFFFFDF
+:1054C0000C30C30CC30C30C3CF3CF300F3CF3CF320
+:1054D0000000CF3CCDCDCDCDFFFFFFF1302FFFFF42
+:1054E0000C30C30CC30C30C3CF3CF300F3CF3CF300
+:1054F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEC
+:105500000C30C30CC30C30C3CF3CF300F3CF3CF3DF
+:105510000002CF3CCDCDCDCDFFFFFFF630BFFFFF6A
+:105520000C30C30CC30C30C3CF3CF314F3CF3CF3AB
+:105530000004CF3CCDCDCDCDFFFFFFF2304FFFFFBC
+:105540000C30C30CC30C30C3CF3CF300F3CF3CF39F
+:105550000008CF3CCDCDCDCDFFFFFFFA302FFFFFB0
+:105560000C30C30CC30C30C3CF3CF300F3CF3CF37F
+:105570000010CF3CCDCDCDCDFFFFFFF731CFFFFFEA
+:105580000C30C30CC30C30C3CF3CF300F3CF3CF35F
+:105590000020CF3CCDCDCDCDFFFFFFF0307FFFFF12
+:1055A0000C30C30CC30C30C3CF3CF300F3CF3CF33F
+:1055B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF73
+:1055C0000C30C30CC30C30C3CF3CF3CCF3CF3CF353
+:1055D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF93
+:1055E0000C30C30CC30C30C3CF3CF3CCF3CF3CF333
+:1055F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF72
+:105600000C30C30CC30C30C3CF3CF3CCF3CF3CF312
+:105610000002CF3CCDCDCDCDFFFFFFFF30CFFFFF50
+:105620000C30C30CC30C30C3CF3CF3CCF3CF3CF3F2
+:105630000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2E
+:105640000C30C30CC30C30C3CF3CF3CCF3CF3CF3D2
+:105650000008CF3CCDCDCDCDFFFFFFFF30CFFFFF0A
+:105660000C30C30CC30C30C3CF3CF3CCF3CF3CF3B2
+:105670000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
+:105680000C30C30CC30C30C3CF3CF3CCF3CF3CF392
+:105690000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB2
+:1056A0000C30C30CC30C30C3CF3CF3CCF3CF3CF372
+:1056B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF72
+:1056C0000C30C30CC30C30C3CF3CF3CCF3CF3CF352
+:1056D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF92
+:1056E0000C30C30CC30C30C3CF3CF3CCF3CF3CF332
+:1056F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF71
+:105700000C30C30CC30C30C3CF3CF3CCF3CF3CF311
+:105710000002CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
+:105720000C30C30CC30C30C3CF3CF3CCF3CF3CF3F1
+:105730000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2D
+:105740000C30C30CC30C30C3CF3CF3CCF3CF3CF3D1
+:105750000008CF3CCDCDCDCDFFFFFFFF30CFFFFF09
+:105760000C30C30CC30C30C3CF3CF3CCF3CF3CF3B1
+:105770000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE1
+:105780000C30C30CC30C30C3CF3CF3CCF3CF3CF391
+:105790000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB1
+:1057A0000C30C30CC30C30C3CF3CF3CCF3CF3CF371
+:1057B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF71
+:1057C0000C30C30CC30C30C3CF3CF3CCF3CF3CF351
+:1057D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF91
+:1057E0000C30C30CC30C30C3CF3CF3CCF3CF3CF331
+:1057F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF70
+:105800000C30C30CC30C30C3CF3CF3CCF3CF3CF310
+:105810000002CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
+:105820000C30C30CC30C30C3CF3CF3CCF3CF3CF3F0
+:105830000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2C
+:105840000C30C30CC30C30C3CF3CF3CCF3CF3CF3D0
+:105850000008CF3CCDCDCDCDFFFFFFFF30CFFFFF08
+:105860000C30C30CC30C30C3CF3CF3CCF3CF3CF3B0
+:105870000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
+:105880000C30C30CC30C30C3CF3CF3CCF3CF3CF390
+:105890000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB0
+:1058A0000C30C30CC30C30C3CF3CF3CCF3CF3CF370
+:1058B0000040CF3CCDCDCDCD001000000007010051
+:1058C00000028170000B81980002025000010270FA
+:1058D000000F028000010370000800000008008033
+:1058E00000028100000B8128000201E0000102009B
+:1058F0000007021000020280000F0000000800F004
+:1059000000028170000B81980002025000010270B9
+:10591000000B82800008033800100000000801001E
+:1059200000028180000B81A80002026000018280D9
+:10593000000E829800080380000B0000000100B0F8
+:10594000000280C0000580E8000201400001016003
+:10595000000E017000038250CCCCCCCCCCCCCCCC93
+:10596000CCCCCCCCCCCCCCCC00002000CCCCCCCC87
+:10597000CCCCCCCCCCCCCCCCCCCCCCCC0000200077
+:10598000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC57
+:1059900004002000000000001F8B08000000000031
+:1059A00000FFFB51CFC0F0038A277033309CE345E2
+:1059B000F0E981831829D35FC6CEC05001C4554099
+:1059C000BC0B883FB132307C66255EFF352904DB95
+:1059D000488281211E88D7883130A84922C41DA45D
+:1059E00019182603F9A150B147403A5F8A32770F60
+:1059F000169CA68029E62A8760A7639147C6196886
+:105A0000F24BE550F99904F40F34BEA28ECAFFA2FE
+:105A10000AA113A0E257D1E4BF42E53BA0FEBAA61B
+:105A20008EDDDC4E32FD5DC302A101FC99B04798CA
+:105A300003000000000000001F8B080000000000B1
+:105A400000FFED7D0B7854D5B5F03E731E3393798E
+:105A5000E424E43181104E1E2068080384888AB74C
+:105A6000271030F6D27678D5582D0EAF10F2866B0F
+:105A70002DBDB67F06084978A8C11F11ADD5E12913
+:105A8000F6821D3122B6880328D2ABBD37587C552B
+:105A9000EB1FD10B8A90442A6AEFB5E5EEB5F63ECE
+:105AA000C99C9309047BDBAFFFFFFD7C9FEEECC735
+:105AB000D97BEDF5DA6BADFD18C93181A40D23E476
+:105AC00022FCFB0621929D1032A1379DE32021D7B5
+:105AD000184292662FFDDD921442DCBAE2BF49A360
+:105AE000A9BBFEE41A9A5F5FECF0AFA44D5B1F4DBB
+:105AF000786A092DBFEFA12FC34FD07CFAEC79ADA6
+:105B0000C5B47ECE24C90F5D1D1AAB1002EDE7D8D7
+:105B1000C276015281E5979030A17F92AFE8F845B7
+:105B200084B8E89F2497FE37891CB2A5603EE4D173
+:105B3000A09E029946483631FE55607E36FC09F536
+:105B4000447767D0EF759E77E513EC7F8E5F0ADBB5
+:105B5000E94773F20372C84DD3C6086D49C71DFBF0
+:105B60005D3908F9C00C99E46387B6D8FE6FCA0F97
+:105B70004C7514D2FE670B08FFF9D94936DA82CC8E
+:105B8000A6EDE13B224E1F1ACC679FD9E8B8DFE0B3
+:105B9000DFDDDF40FFA7C05F4B09A1E5CB1C0C9EFA
+:105BA000E4D9D9C530CE8919D71643BF73A61332AD
+:105BB00088564D9D3DF69044F3EB1A89DF4EDBCDC0
+:105BC000290D1CCF81D9F8CBA79302E8978EEE6000
+:105BD0007D5FC4FFEB38EF643EDE3FCC1E2B10FA36
+:105BE00041F6978AA95D72A0F953D14B486A052DF9
+:105BF0001F1953EE9F769AD0F2E4E9E6F64013724D
+:105C00001D2125C49372EA1AFA7716C9BA2842AD43
+:105C10006A0B8CEEE50F6B4AFFFDF922D001FA12F8
+:105C2000FBD61F6A9CE9E9A0F85A377B9687D0F427
+:105C3000F5C02C0FE0EFF5D9B3108FD6F673666779
+:105C400027025EFB1BEFFE063AD008FA3DC7B3B54C
+:105C50007E9048EA23F4FB393AD1C331FDDF01934A
+:105C60004D256409301B4DB325D5A6D2FA6C8DE8BD
+:105C70009138E39502B1693B92499928E352F30FB9
+:105C800061BB3726D94AC371E67307EFC7551AB807
+:105C9000670EA56FD674127551BA1229AAC6E2759D
+:105CA0005D8A541A8E03C7DD1C5E42687BCFC0E15B
+:105CB0007165D802D09F32470CC4C2F50380674299
+:105CC0006F4AA24CEEE6F818FD72BFFB6C508F33A2
+:105CD0008FBB008E0990AAEC3B0E8F0C7C9301B217
+:105CE0009682FC43C26324E0FBCC1EB9240107E585
+:105CF0008FA1F01715AE2DA47BD41214B256EC4729
+:105D0000F4A42403BD5711DE0F29514F517E1542D3
+:105D1000AB848BD75C6A9E123965F035F0A93B19CC
+:105D2000C7BF1C5E48A018E55231D48878C007E38D
+:105D30002BF94DED02A5CBBAD1E57E946F8A219067
+:105D400033437EE1DF57F43B37FFCCBD9CD291CA91
+:105D5000916B39D38F8ADF2C67EB928EB50820C800
+:105D600064B9490F1012244077036FEBBEA278BCD0
+:105D700004BF5BFBDD6FC8E7603298C927933F051E
+:105D8000FA07BD79D37E07F0F53ADF5E07CC6B5D8D
+:105D9000FE5E827A8AD3C7E8D795AF5D52CED681B0
+:105DA0007C8D80EEC348A79EF2D1A7C6027E76A660
+:105DB0002AF78B747E3B9308EAD9756B48782BD011
+:105DC000B594E5B56F69E1B5748E3B9DBCBE98D6C0
+:105DD000D3BC06EDA9BEDB3A490B87687E6B8B8D81
+:105DE000B51FAB85459A1F319184148A4F6DC5C28A
+:105DF000954E5ABE75A3EA17B55EFD34A225672DF0
+:105E0000B4DFB2DEA60AF0BD8FAD233BF3493844C0
+:105E1000C7DFB139F99B23693E14B2F987D34FF23A
+:105E2000F8FA45D9A5442802B4313A9C21795CAEF0
+:105E30000402E5A9BC7CCB7EFFBF8EA4F03D365D9D
+:105E4000F2AFA0453BD6CF4CD0289E766881043F68
+:105E50004D7FF0C07CCCEFCC0C2600DD766E9C9F95
+:105E6000004CF1C0E6991B46417B61D2611DE96C93
+:105E7000D6FF471F283AEC00384B999E4F6A0D7E9B
+:105E800053A2F9BC4912B9894E21CFAD21DCDB1FE9
+:105E9000B211584FFBE86D8BBE4ED4CD7957EBB4A1
+:105EA0008F817F5D0F160920DA3B3586E7413792F7
+:105EB000F08AECBEE3EF5CC8EA13295D800E2EBFCA
+:105EC000625967965AF856477970713CB95A751CF1
+:105ED0008F487A8990D68B57FA9F4662F0E97AF01C
+:105EE0002881F5E98AE76381275DA07C0F83AB9C5D
+:105EF000EFB91E1CF7CA5763E3F1B121EF1EA07F73
+:105F000022C577612404EB507A61240AFCE2C95768
+:105F100034B00B9A0931C9C5A1D1FB7C1D203713C0
+:105F2000223E58AFD78D7E83C98F5681F830E66FF9
+:105F3000B4F7E4B79358FBC1A88772F8CE537869D9
+:105F400039BB87CB594F7F84AD4724731CC2754F33
+:105F5000E161755E1C7D4CC80A94CB9749E07A815B
+:105F6000A6DECDED51A7066CAEDF0079B7400291F9
+:105F700038DF4D13D87AD242745DA0E9A3442F16BE
+:105F8000709D4B66FAD7B22EF5D19FBC5D16E9160F
+:105F900040DF68D43E803487F831CD23014C4792EE
+:105FA000564CAF26114CF3493BA605A41B5343AFF7
+:105FB000F8892A427EC4C4FAC920E7A4DA638BE5D3
+:105FC000BBD06432B23ECE3C9A2D787390F8EBF899
+:105FD0001D025FE748A68AFC43F87AF16EB018E824
+:105FE000C55428FCBBDBCCEFE224BE0E38EA3D6989
+:105FF000805733DD8D5454CD7C5A6DF0A944241C58
+:10600000C7321FC463CCB8D6FE5673FBC6989F9C9C
+:10601000A2231F496E66CF5038F4BD71F0D1280815
+:106020007C9E41ABDC3AB229BF4B49B6C85A9A6B49
+:10603000744F76E8382F3F894767EB7CACF02ABE77
+:1060400081C1B3A9079E0ACB3AFA97C2F34FA6FEC5
+:10605000A44CB21DD60BA28670DE56BCF6F9DE4209
+:106060008FFEE4D29169D6574A8AD70287859F0668
+:10607000687F7CE34BEA7FE4C3FA1B21412AECA949
+:10608000F90101E67FAD401A13295EC868A2EDA0B0
+:1060900070CDF56ACC8E8B693719F491660BC97493
+:1060A000BECF92EE23D03EE427911DF4B367F36D8B
+:1060B000A55B697DAA9FB663FD05401EAE1D6D0BF5
+:1060C00040B9D19F4E9E32F547FD2E11F0E136E8E2
+:1060D00063F1C3E4B136B41F957CA26F89235FC717
+:1060E000B97C151D71EAB09EB8CA94B0331BFA8F03
+:1060F00014433EB59AF8615D9FD4CDE651C6E130B8
+:10610000E69DFA5940007E6AF7313BC05548D03FC2
+:106110005432DA74F01FDDB40EF5427E541753503A
+:106120003FA23FD81F9E3D5F3DED0BD07E7DD4B991
+:106130006A07BE92FCE9A09F578F56C860FABDF867
+:106140003B3BF6FFB9A762188999CF470DD1B10B38
+:10615000A9C170A6E118A6671BDA31ED6C780BD3E4
+:10616000FEE94A598EDACEEB7EE2D7C01E100F3F11
+:1061700047340FC01DD5755C171CA212B32E808248
+:1061800006FF6FD3D8BCF0DA6CC46B08E64DD56758
+:10619000787836E05B0A009E873822C2D27C867708
+:1061A000C03FD001CA8B8E3CB702F15C4DC6029E47
+:1061B00037C9A40CF43CE013D6897D82ED0E800330
+:1061C000F2F369FEFA8FFAC1FB5986F78C97299E84
+:1061D000004E494B64C6AD8EF2953B910B12D7270A
+:1061E000BD7A92F9D9BDF6BDF6EF00CF964689ACDF
+:1061F00085BCA6684A11B7F7414A8215D3C1DFDCD6
+:10620000563EFD28D80BB9E25787645A3EB45E3A31
+:10621000D911234F596574FDA476C2B0E5E6F2ECBE
+:1062200090394F07407F34B7C55C3EC4C6F5AE8792
+:1062300078401EADF35AB6E85771FDD3550D24EAE8
+:106240009663F202C3A79117BC133B42747ECB4600
+:10625000118C034CB7B1F5B315BEA37C712F4FD78A
+:106260005BFA315269A2DB46C6303D196F7DBADD5B
+:10627000563CCE46FB6BB04D1E67A372E4922204DF
+:10628000EC77975BD1E3F993D36D128E9F20B5EB3A
+:106290002285ABFB3AE2DF4AF1BE4CEE8E827C2CCB
+:1062A0002BD6FC215047FE30CA6312D56162F61529
+:1062B000C153027050784A6C384E04FBE9A6380787
+:1062C000FB7D99CCFA5D364A236837F603E75536ED
+:1062D00019E10CD80409FD344E97551539F74DA333
+:1062E000D94E559F05FD67260567C17846B96F7E73
+:1062F00029FA6319C3CCF42B77D467017F540622A3
+:10630000D3807F4E7B5F6C92E9BCB73610BF44F1FF
+:10631000FF9E2B701BF457737BFD08B07FDF065E7A
+:1063200098002A3B807AACA564A55FA2E572891427
+:1063300095293FCA130FBF2517401A2A86388B9319
+:10634000D4337D47F54B2235BD1C23F58F217EA22A
+:10635000803CD072556F25600F38A8DB703286EF15
+:10636000944C731E6CFAD87C7F7AE3722998E727E5
+:106370008703FE09DAE9DD49CC7F9226FA0B00DEBD
+:106380007BAFFFA606F0FCC46633F967567F4D5A13
+:10639000FE6F69791068E2FEB6B4FCD5B4BCF1803A
+:1063A00097569C9763CA32940B05F02432F907BFC5
+:1063B000BE671DE478F85BCFDB582F5737BC35F844
+:1063C000C3E120A71D833FA4C4592D0591FF423E80
+:1063D000F0B5281C92998F09784F1362526E1718E6
+:1063E000F69B9C5A887494DCD2A98E98F5DDC08FF8
+:1063F000B2FCDDC11F8E87F46D4CAD7855A4200131
+:106400003FD068D713B718E0FAEF34E2A979C41F78
+:10641000A53873A4B0786A7A5E280AF37252FD092F
+:10642000EBD33D235F6BC5F081C50F3B94AD203F9F
+:10643000B48CB6615CB36578E49002F90C6A40D123
+:106440007A67CA5D21886D4CCD637CE3F4B3F5D4E3
+:10645000353C8C7E98A1BFBD1C1F5EAD1CF5B3679B
+:10646000A2D9DE31D601272BA2F436DB51CE94A679
+:106470004FC582BE7E9A539B761AE569A4B93F2325
+:10648000DED16EE3F18B6BC9B5683759E212FDE1DD
+:10649000CD6BF87113D9BCDCD34918FCE6F48951F3
+:1064A000C49BD7CFF066D89B1E3EBF9B4A2304FCFB
+:1064B000BE9EF8F3CD0C6FEBAF8BA27FB77EEC29BD
+:1064C000B467BD851D263FCEF81ECAA1FEFCC4766A
+:1064D000A8A1F618CB1B71238AA7E91969BDEB6146
+:1064E0002BB7DBAD7453279262D0634747A7158360
+:1064F000DEBEB784C24EAB3C7A589762F0ADF27EF6
+:10650000D47C86DF7BCBD87C697BF4D3EF9D9893DA
+:1065100004E366F2F8B0117FEEF1CBEBCD784F28B3
+:10652000B4C4852D7EB7EA67F4524BCCE5AB395F36
+:106530002B22A7572A19CEE835303E4F32F8BC84BB
+:10654000F17932DF37482FD10E011D924A99FF4D64
+:106550002C7EF34D291D8C5E378FC8003FFCFEA9B1
+:10656000DD3E669730BA26717EBCEFC61102C87157
+:10657000728926407D723EC35332C513AC77C9A5DC
+:10658000CCEFF64ED4B05D5209A35B0B7C4CE15FBF
+:1065900003748A891F3B4B5B75A07F6BF14E1D74A2
+:1065A0005932C5E1200ACFD4520A1BD89DB45F806E
+:1065B000D75318C5B85A524970D8A5FC7A42A2825E
+:1065C000CD87F8106C684BE93C25587E6862B22094
+:1065D000D07EEFA77CC0F180713C178FA3DF5F787E
+:1065E00012F5DCFDF04D36C8A9F6EB1C9A27A5364E
+:1065F0003FF807F797E608F1E2E7C6BCFB83CB2A32
+:10660000C712F83531FC7295C8E3DE16FE5D4722ED
+:106610006A2EC857486FF7A5F5EA0F83FF7AE4653D
+:1066200012E3CBFEF489A187DD2418B265F7D51FEC
+:1066300092CEF8DE9E174079EB03EF24C6AF528A64
+:10664000B9FC3691DB7F865ED19207142727A10023
+:10665000AE7722D74F4FDA020BC554F0BBC3B84E0A
+:10666000B8C874AE37199FCA9CFFA6E633BDE24A8C
+:1066700089B076978DA73A90DFD634A8A81F5AC65E
+:10668000DED59E43F1B06678931FBE738C6B19B94B
+:106690008DF6DB3C7C79702B0CC0FD30D4BF22AC76
+:1066A000838C5F8D7D30030E9219D2619FCC097E61
+:1066B00011E06724DB5F902412B58FEB1DDF954757
+:1066C000E1CD6769289FC10DFEC9EBB6E02A9C6F3A
+:1066D0007E6B94A29BCE9BC9CB6A21425C22CCEB01
+:1066E000727C1EB231BE8E9FF6F75D02ECD3C4E120
+:1066F000DFDD22DBA7592D478850087E1BED89F28C
+:10670000C9EA6C6A97C781A391F36BD52E67F8C36A
+:10671000187EAB892499F275FB33C21FC6FA117734
+:106720000AB84F51CDD158433AB200CFEF291AF6EB
+:10673000576BEB48837C17E94E5B027810038F8B15
+:1067400074FD7752BEC4B8907B60EBD6E5F0A781AC
+:106750000CD18540CBE4A90F79988E17DC07E3694B
+:106760002A2BBFD271E3F0F50BB17C4DC457596AA7
+:10677000E56B7F14F9DA9D12C57AB79FF1B5C18F29
+:10678000899C1FAD7C688CBF9EC7AFD6723E5F33BD
+:10679000A1498570DFDA519B309EE62CDA5C017CE2
+:1067A000DE32AA250C7CDE64F035DF17A1FE2EDB7D
+:1067B0001FD35AA3B04E2672BE56D4EE06907BEB82
+:1067C0007C5D9338BC3405BE06B8395FBF07F893CB
+:1067D000FDDD08AEC1D76B07CCD7BA456F9BD3FEA2
+:1067E000FC27D9C2D71E89F1E767C0D7004F0AB38B
+:1067F00063DC3E96CA7EEADFC7E9E70689F9996B52
+:10680000B91CACE572B0B61F39F83F22F303FE9A0B
+:1068100072308BC98143A2E58993AE8C1F25B0D31A
+:10682000E3C87B9E24FCB5E1DE3443BC723CFE270A
+:1068300030CD84BEF434D2CF44E7C0E43B8FC9737B
+:106840007F72BE76687C38FE5364F4A7F82E9226D9
+:106850005C39BEFF5A7015727E36F04382C528B788
+:10686000317A663AC02BA9869E7904D3A979AD28DE
+:10687000A786BE81580AFA2B6A2BC63B9C99AD6845
+:106880009F39F398BE31FC24EB7C8DB87813D73355
+:1068900049792102EB9F3D85703FAA9EF95199CC21
+:1068A0001F30E2D586FDA8187ED4D0BB709FA77993
+:1068B000783DDA97CD37D63BE2EDC336FBEE77F085
+:1068C0004D5FD33EEB1A5A0EFDAEC9BB9FC4B3C396
+:1068D0008C7918FB464E3E6E731EB5A8605CDF32A5
+:1068E000FCDE6AC73467B2FE7ABEE77A57EED1BBE8
+:1068F0002C8F76546E8C9F6FE9C7E00385E843A325
+:10690000103718E41E09E74C9A84043FD8C74D920B
+:10691000209D72901E7BA95A891640FF2766BC9C59
+:1069200085F6B23DB806E4BCE9AB8003E2A9AB53FF
+:106930005EF3C6969F9DF1E6B7C16CA5DFD5E27EFA
+:106940008E8348B1FB6327DCDBD17E4BC837C7E9B8
+:106950009C14AE0902C413CCE50A8FBF2899E672D5
+:1069600099C75FA4144B39E70FB934BE5E7993EB36
+:1069700015DF02764EE7C41C16D73B712B4F6730EC
+:10698000FE3EC7DB75F334C2F5EE5F531F25E5F617
+:10699000C2EF9BE2C7F822996547BB3E2B859D2B32
+:1069A00020B1E726E05F6BA24462FCCCA18197FF97
+:1069B00008F1D4610BBECA063C6B15EA615846DB90
+:1069C000A56C9CC76342F72818CFE63A8BFBF5020B
+:1069D00045E3726A120BF4DBDB2185EFBDC0523A4E
+:1069E0008F7B0591BFECC03722D0298CA98B44B195
+:1069F000DE433A309F081BE6B9E08751BF4BC433F2
+:106A00004C611BC68D7ECCF643D688786E83A80376
+:106A1000B4BFC9ED2AF89742887EE71AF877BE40DE
+:106A20006B31C8C4E0B208C693ADED7C53D839A031
+:106A30003E7AFBAF4FDF375273818F542C37E81CFF
+:106A400014F54E6942DFF25F8981F312C6AB58DC60
+:106A5000CD5A5F2AE91740DEACE5C20B7F3A057ECE
+:106A6000F4AA6764F4A3A73C2347BF41F3355B0452
+:106A7000F4536D079DE80F773EC2F2518FA243FB9E
+:106A800073DB058C07D5D9DBEFBD01E28ACF880423
+:106A9000FD8D7019EE8B9DE27326FB59BE9C07801D
+:106AA0006AB61C9A0BDF57ECB713D877A8796EF14A
+:106AB000B76FA0F9C5C764F4516A76AC50607F65C2
+:106AC00049588840BE6B32C1F143FBC4F00EDABEB8
+:106AD000CBDB9E36C70DFB2B0EA25D45E1F6B4A7BE
+:106AE000CDA6F4A90C3F350DBEABDC2DF8C1FF9847
+:106AF000F2CC8EA319F4BB9A27043CA750B5CB4522
+:106B0000B418BA9C6A13A3DF80F8339D27F8C58BAD
+:106B100049EB34C07BCD8E0D8A1613B73CD330922F
+:106B200068F6DE7CCD13741CFA5DED93821FA658C7
+:106B30006B2341E08FCEE79C65DBDC30BF15CA08D4
+:106B40000FCCAB5981768BC3F3F6C17E7A65788B17
+:106B5000328DD6573EB245298FE1A7AA5DD7102DB9
+:106B6000863F4E6DCE4DBFD47A7B86AE5BB1F0547E
+:106B700012A6B788145666C4EC7B76C8499C3F457C
+:106B800053FF06DF875E2718C70A3DEF41BC1A7422
+:106B90005BA632BD60D0EDBCCAE9287517CD88B3BD
+:106BA000AF7A2FD0C10EF12A15D3FB1B7C986E6CE7
+:106BB000D0903E9B007F57E1BE06967B279162886E
+:106BC0008B7875A2C2529F3C5D2F96214E1260F9C0
+:106BD000B4DB83827689F91BE92639380F825CB7EA
+:106BE000C94F4C96E8BABE49092E257E3ABEB47705
+:106BF00072C97560A705E7C8A9B09F1DAC60F1E830
+:106C0000880FE4A289EFCB7C4B66F2D694A1607C1E
+:106C100064D3F78BB6A1ED41185E367DBF7C27ECBF
+:106C2000ABD17EE6CA54AE1A65DA4FEEE5FB499B5E
+:106C30003BD1D44FDADC0AA39FC5D88F7360FD6CBB
+:106C40009A7BBD199EB995463FF5D88F6760F34A88
+:106C5000BB6392199E3BAAB19FF4DBFD681F8806B7
+:106C6000FF9076DC1775EF4E1AB796C4F2D1E41F89
+:106C7000C3781E2A55B17C943831C1244F497AB269
+:106C8000293FA874B0A97D6A20C7549F5E76B58558
+:106C90002FDDA8BF314F818A26B138AB325841BDB4
+:106CA000533CD881F9BB06BB51EFDC757DF02AB0AF
+:106CB000F70056D0F37729C1316A1CBEA1F3120840
+:106CC000C6CF341BA47DEC32BEEF3979C85723DE22
+:106CD000A7DFD7D9BA4724D1FC434AF12330EFAD1F
+:106CE00032B3E38D3843829DA0FE6BCE2EDA168A36
+:106CF000C16BCB50CA2F426FBF2D72D007FCB87347
+:106D0000F56F574A14BEA6A10A1E6E7A5CFEEDE12D
+:106D100010B5999B8796FB00FF7685EA8FD8F11511
+:106D20003A7E3E8EBF1BC6DF2B333BD93ABE3D6752
+:106D3000A2697C475685697C8742C7A7F2B16FF587
+:106D40003B7C7C8ABFEB0979567E07C7B76755E065
+:106D5000F8CD0AA9308D9FD033FE01909FC3FDCDA1
+:106D60003FE77AF3FCB32ACDF357D8FC8FAEFE8011
+:106D70008F9F80F37F59FE80CD3FAB92CDDFCEFA5F
+:106D8000ED19DFDB83FF5761FEAFF537FFDC49E626
+:106D9000F90FAB36CFDFCEC67F63F5277C7C378E0D
+:106DA000FFA6FC099BFFB06A1C5FB107FDC047CA84
+:106DB00090847AF09FA961A461405DA3E3403A9278
+:106DC000C5A937C83908C75D098CEF3E4FA0FCE65E
+:106DD000EED5A7244C2590EACB5ACED355BB8B15C4
+:106DE000E62F84D05F58C4415DB85FC4F58C6CB4A5
+:106DF000878753783BF78B21C82FDC78239E5BACC9
+:106E0000B313DC77A75630FA1FFFF1C0E8ADB1F33A
+:106E1000B2A68B5A65CBFE1383C738EF5424ABA6BA
+:106E2000FC2988A7503D7C12FC1F9A9E96E978B4F5
+:106E3000FC43F083AE8A951B762E8C7677229FCE0C
+:106E4000EBBB1CFE5312C3F7A93B05DC47F87CC320
+:106E50005205F4D9A25697C96FA8E374EA7ECE8E84
+:106E6000FB8DC679BE5B501409F9FDC16F1D05BBD2
+:106E700071F1E641A6EF6E27E1D5701473C1FA797E
+:106E800043553AFFDBCAECE3448C6BEB43581C9C44
+:106E90000C81B84959DB067908CDDC52269BECF908
+:106EA0005B83E6FC6D15E67CA71C966D60CF2C110C
+:106EB000C816DAEFF7EB65CBB900368E5749E676A0
+:106EC000251BEFBB948619B4E8FB908E836215E90D
+:106ED0003A5765DF1AF0D4DD2D9328AEC71DA9B847
+:106EE0000F144A45BF2DA8B2795BE19D2B3BF400FE
+:106EF0008567EE8F44C4A715FE8E832EDD46EDF325
+:106F00008ECD7F90217E6C9D8F15FE3B965BE7A317
+:106F10002AB03ECC0B59CB199F58F9A96E7FF13698
+:106F2000B33D7BF3B658FBB56AD70C537E49F85690
+:106F300053FBC59BE799EA17B52E31D52F68596ADF
+:106F4000CACF0BFDC8D4FE8EE52B4CF5DFAF5F63D7
+:106F5000AABFAD6283297F6BF02153FB5BCAB69851
+:106F6000EA6D07477D07E468D5EB229EFDBDE03E54
+:106F7000752FD89B17DC12EE737E44ED159083338A
+:106F8000D45E81B473FF78F4A7A91E2C874DA2F9B3
+:106F9000CA98552D99A09709EACF7265C2AAD02444
+:106FA0008A17B0D7A97C889B15121D04CE4C720F8E
+:106FB0001F778B31F51D97A9DF4C057D7CDF7AB1FA
+:106FC000237E79DDD679C3D4387E6AAFDC9221B0D6
+:106FD000CE7559CE9F1869B5E53CA7B1BF7D81EB51
+:106FE000D96A85E983EABD1993617386FAE523E2DC
+:106FF0009D9BECF93E22B00D48B0FE53811F869850
+:10700000F66BAA76E59AE4FBEC2111E1AA059D4016
+:10701000F5EA1752608D0272163D92356B34C0A1AD
+:10702000AF5540EFEC4FC575FD6C43E936D8AF3F27
+:10703000D310C0F4A386324C4F350431FDB0A10209
+:10704000D3930DF59876342CC7F4BD8610A6EF3691
+:10705000B460FABB86564CDF6AD88CE91B0D614CD4
+:107060003B1B744C0D79E8D1BF016E0F1B1BD784FD
+:10707000DBC37C2E8DA93DE7C270FFF7BCFBF3118B
+:1070800060EF9F7FCB8EFB6CFDE1CBCA6FFDD351D0
+:10709000477BA53C3C089D636BBD3381D1C9692307
+:1070A000A5641CECFFECF4CFCFC7BCC42EF584FD67
+:1070B000333C71FA85785DFAE5E944F4EE829994FF
+:1070C0001EA71EFEAF22E8F702AC7F60071C1171FD
+:1070D0001D26D16D7EA0D795E24D78E1F759102F8E
+:1070E0003BD783BFF62C888B5DABA8D8FFF9363B26
+:1070F00081F8D2F9032EBCCF75FED8362FC8E33203
+:107100009F188E3D47614D6B22D961B7C9EF36E7B5
+:10711000CFB70AA5781E9A6889B347035FA961387B
+:107120000FD2D9E0C3D4E867994FC171CEECCA65DC
+:1071300071337E5E83EC4E427EA57E27B6FF9F862E
+:10714000A7BF7E0C780869231F38085E71BB98DBE7
+:107150007FFB7EF949FA4C81F82A39207F0EF682AE
+:107160009DFE77111C652261DEE8B72E2286EC6356
+:10717000A07CB7693CFA9D66F8F417732EC5B7E694
+:10718000FB34220468BF469CA40AFE80F330F5025B
+:10719000C6AB8C784997E46E11C6F4C64BEA78BC4E
+:1071A000B8C6D1A10469D1B9B6DC4BEE9F9E69384F
+:1071B000A6C239AF0A47AB02CE4F45645409E8B9BD
+:1071C000736DABD2C01EAC12CFDF152F7E9B6767ED
+:1071D00071BD2561B9DBBC8E72FE20B45FA39C1D1E
+:1071E00072749F8AC99FB5313BDBDAEF04FBC0F6AE
+:1071F0002D6A771F9F7683D6174FB5FB3F55303EDC
+:107200002E11535CC9C0DF7B4A60829DE2A972D710
+:10721000FB688F7E248746DC7D09FDD4777E6E9FD8
+:10722000E97C7288B4C338F327F2818876CB3B744B
+:107230003DFDF815999DDBE4E7807BF695F9BEFEF0
+:10724000029E9BDF5685E7843EDEF78F68FF2D2484
+:10725000012FD281B416811D798ED84A014FE7C81B
+:107260006BDEF13174B8953A4A40EF052D663B86E6
+:10727000DABFA6FCE2CDE67C39999906FAA47CA394
+:107280004CC202CECF547FB35DC57E1793FA265809
+:107290005725EE8FCC57893484EAD59A677F5634C8
+:1072A0008FC211B4333FC888BF2C49667660654AE7
+:1072B00058817DC20FDAC67FF70620833DDC04715A
+:1072C000289248FC3B485FFC5E29FC56788DF5BA55
+:1072D0004F1C88C321EE12E2EE03D6DA056ECF868C
+:1072E000303DC0E76DF805C72CF915767EDE5224D7
+:1072F00022D0FD9CEA08D912B1DE1F8578DC5EBB86
+:107300007F950671FCC06A7B6A6FDCDF6897640F4B
+:1073100062F959E1D5723CF720450BF0DE218FEF81
+:107320002B9C1FC4046F019C23F540DC1ECE753AD4
+:10733000BD5B21DFE4A9C0F31F7520EFB4BF7BBCA8
+:10734000D38E419CDA415AA33AE55FBBCFB21FA06E
+:1073500099F32E904BD0675080E7A209C6B95C2301
+:10736000CDED3C7E73FE312E8F7481433EEE39DFCE
+:10737000E67047E13C0999289DEDF1B772C0DF63E3
+:10738000F0C3FD56687FA7CADAD7F27DDD3BDF9EEA
+:107390009C9E7C097D54F7A540C231EB489DD4AD3D
+:1073A000001FD67D2961F9D7D69B1A5D5563F4E697
+:1073B0002B4AF059FB04A627013E818E13BBDF64E4
+:1073C000BD877002F861422F3F7C6D385288497F3B
+:1073D000BFA7048FC583E36BF7EFEBD3FF09E0BBD7
+:1073E000FFB1FEF3FAF4DF110FFE9A67F7EC0BD151
+:1073F000F5B5F2170F78E110D3C7526B1A9CEFACBA
+:10740000DEB1DA0B72F99114F2025D3F0E8B71EF6F
+:10741000E7A63B0CBED3DD708FB096F3DD999FAF2E
+:10742000FB36F82F9FEF90558C0FECB247ED942967
+:107430006BDB9630F9D8657F9FE59BF1BC53DD7E11
+:10744000B3BEA87CFC81340D0F5585B8FF1C45FFE9
+:10745000A076FB7F4C03BBAB8E74A3DEB37E07E349
+:107460007F998CF6C03C25B16FBD710EAB8EE3A544
+:10747000AE6D1DDE13AF6BBBF934139A0EF43BAD4A
+:10748000DF5570BBDFE1309FDF34F042C2CCEE5FEE
+:10749000F5C48305EF53B8CE6E7FC52BE4C7F22940
+:1074A000D37FE7230B1EFBA5D6BF5C7552FD186B7F
+:1074B0005F1BEBB4B69FFB2B07585A2D47BDE00F5F
+:1074C000566F91F1BC7BF59E6D3B1F86F8CCDB7649
+:1074D000FF70DA7FD59E97DEB89EE6AB9E9253A6EC
+:1074E000B369B8E19EA2419F3AFADFF271BDF4A8F8
+:1074F0007CFA25451BCDCA7F9CDC4B97AAA70E2999
+:1075000064745F7C4C891C52D87EB6853E91F7A787
+:10751000815FB1EA892F14D05F1F1F14487A761C4F
+:107520007C6E7909ED63C013D293D3AB877E96F658
+:1075300075942EA8172DF4B2B6FB98AF07D02FC4C0
+:10754000E3297F3FF94BD8B7F99DDD0F78A878F292
+:107550009FBC309FD3523DE3F39FAD4E83FB20157C
+:1075600072284DC59495573CFA03E4BFC5C77F9078
+:10757000C6CEC5EA19FC5C5706CC73D12373709E46
+:10758000E524887C58F13376CFFC82444A9F8A23D5
+:1075900027F739D83A767AAB1D37114FC34202FB31
+:1075A00018AF89E11D180F64E70D7F60EC3F91650E
+:1075B00098BFE060F45AE430EEF1D1A524967FB78D
+:1075C00037B7039DCE0CD5D3218E5C47A410C78757
+:1075D0007091F62B1E9F9ACECF1D685211FF8EEA36
+:1075E000FF29500EEDDB65DD5960FA8E5CCCEE1D97
+:1075F000FF4E3E3E853B01ECD7D369D41E8C33BF92
+:10760000030E639DA676560C9FC5C83B93FFED6B9A
+:1076100098BC1BF21F9E510AF59F9D607204DF818A
+:10762000FD42E18AA663FDA1D902EA073B89C69320
+:10763000F3ED32977373BD955F28FC12ACC73D7CA8
+:1076400003E324231DD0BE2DDF48BF8FD5AB30AE62
+:10765000B76FBF861C2FE6FA60AD451F90475207F3
+:10766000B47F5B2D87773E0CF24BE535A481FCCAD5
+:10767000F85EC127BB8FBCF13D2AB79F440CB935DA
+:10768000EB55ABDC56EC9D40E2C9ED276E3F892BF4
+:10769000B7B43CAEDCBA3B909FFFD67AD5C0E3D3FB
+:1076A000163C1A7AB23F7C5AF5E4B71D5A5C3D4944
+:1076B000FF9D20457DF9D1E04383FF2AFFA506CF3A
+:1076C0000BF5F0A9C1873D7C6AF0619F78A4098F12
+:1076D000D6FABBE16F3A85C07332C6CFAB0FB0FDAF
+:1076E00067FADDD12185882F1D9739D27A74484AEF
+:1076F0006C3E6CC9472CED754B3E60691FB4E4EBE2
+:107700004DEDABF71F51D8B99EA8A99DB8FCA7E4D1
+:107710008338F101631DAA6BFB5409017FB8BBF1EB
+:107720007B79250979205EFEBC88F1F22E8AE3265A
+:107730003A4ED7EE6C7C8F60B593C557BAD46E2F96
+:10774000D893AB9358BE3B5569023D6894773B593B
+:10775000DCAF2BD0ED4D8AB1EFDE3F20A21EEF084B
+:1077600093D2787E28DE40A1F8ED20FDD5B3FD80D0
+:107770002EB0D761BC84AC30F0E354D19DB51CE28F
+:1077800035AD22DE6B5BB8E2162F9C23E93A90FB05
+:107790009D325ABEE8D722DBA60CE952468C1FF870
+:1077A00011096D9A24C0FEF57AE49F0507985FB829
+:1077B000707D7C79A8E4DF95BBEF5440EF527FEEFB
+:1077C00064ECBE87D14FC52396F203FFC8E5A6152A
+:1077D000E31F95DBCDF5411E3F18ECE4E7BEC792F1
+:1077E000B1DC7FB7C5DE0F9E2AE67FA78CD2A7EB60
+:1077F0009848E03CC1F90322D2E7FC6E767E00E3B4
+:10780000FCD701BF772BB1E7A9CE827C5DD5BF1E27
+:107810003BFBCCEF8BEE063EDAF74EC14F697A7632
+:10782000DFDB237E05F967DFCC7A87F46D3FE5A0C7
+:1078300013F755BA0E7A90FFBB9EFF4DD6DD907FB1
+:10784000CE8EF1ECAE835F14003F75ADB457801E51
+:10785000ECE2E7EF563DFF454107AEBF8D48C7A9B3
+:107860004EE64F9F3FF05FEFC1FD81F307E8ACC0EC
+:10787000BE38E842F9AAFBA513E36F5DCF7F511430
+:10788000EB27FCA5F3A9E5FB9D5D1E52B617E04B67
+:1078900062FB4475BFBA6E1BBC2F51D3764859406A
+:1078A000EBA7BCF0A702D0AF5D7B99DDD429773C74
+:1078B0000AFB7981350F34CA945E9D20648369FF89
+:1078C0006BDE280139EA8B973F615C71A0F858FCA8
+:1078D0007F0D3E049DE93F4F184C852907FFF8DED8
+:1078E0003BA0270EDA912F8DF97E125981F6CCE557
+:1078F000E6DDF4FFDCBC85E840E6BD03E63DE1EFF4
+:1079000077DED7C0A1A1D4BE72D097CF9FBF0BF3B3
+:107910007B3C7E847780FCFED2DFF9FCAF98EE7B67
+:1079200029DDBD979FF7877FE7F3EE9FEEBF9ECBE4
+:10793000E9AEC27998BA17FE84F05DA99E9312FE53
+:10794000BEE5BDBFF91BF6FE5A9BBF35271BCF9383
+:107950003AC0B0707B66B6407871EDC8992AD89D60
+:10796000623FEFD54C48607E9528B0F721C850168D
+:107970000F24DCCF82630DF80E889BDD3B93DC4D3A
+:10798000687713C9DFAE53BCACBD7ABE1FCF1A9166
+:10799000716F05219F39C98FF16E8BBFD928105D9A
+:1079A000A0F6AE74F5378F81DF238FB445ED0598CF
+:1079B000BE0F69338F63CAAA62F287DCF9E6BC5353
+:1079C00033E7EDBC3F0761F03B7C240CF16C71D4D4
+:1079D0006115CED3896325024FA538496B08FC0E8B
+:1079E000BBCFFC7D5202E17EEF5F86C78A0416A7FB
+:1079F000128571ED3AE071940DE3DC78481BF1E2F9
+:107A0000C7F7BA08F7AF7BF1DAD40EF894C03F6637
+:107A1000F617FAD584FBD312EF421A69D39DE676A6
+:107A2000DC8FBE2C9D185DB2AA399D9699E862D074
+:107A3000210E7D4C7431F07CA5F4B1D2C58AFFEBE8
+:107A400013185FF7472F832E996E1DEFD7C9DC7F80
+:107A500028013F13F2990182FBABDC7F905274BC8A
+:107A6000A724AA7EBC97007E5C941AE02FEFDE86E6
+:107A7000F1A4733F7FFFDB004FD5AF44E2A0F8EBEA
+:107A8000DCED2151F85E0A2BE09F56B689B84F40D5
+:107A9000A468D1AC987D62C30FA8FA8507E753B9F3
+:107AA000D71E9E4EBFAFDCF74101DA612BBBD1CFB1
+:107AB00009FD5C60740F7514C03E70A5C4FC112BE9
+:107AC000BFAC4960F196B3CFB9CA20AE23EC62E7F0
+:107AD0007F2B23B7C8F698734DA10499C59B9E735D
+:107AE000A15E083D21E0F928802FF6DCA9E1879C02
+:107AF0007D4260F0ED97F19D98CA5D4F75427CAA7A
+:107B0000F22DBB1FCCF8BA5D9FE27EC8945FECF10A
+:107B100076A01F2E9AE2127DE201BB44E48FDAB612
+:107B20001AF443681EF9A236C2FDEF2BF457AB7E60
+:107B3000F1FC3EB87056F5F4E35E887F9D69DFE1A5
+:107B4000C5B8C0AE4BC7E7FAF8FF9135DCFFFFD6EA
+:107B500069764F3BBEFF7F06FEA076F1D30996FB08
+:107B6000ABBB06B1F71449B4E852EF7155EDB9F06B
+:107B700028C4AFCFEEFDE45180BBFACF7F7814FC70
+:107B80000A72D0A9C27D82BA9FBF8EF13EE3BBDFED
+:107B9000703DD0F9C4E3182FED7C9BFA1FF45FE72A
+:107BA000F3A7B3C0CFEC7CEA8F69104FB9F3F9A902
+:107BB000F86ECE9DCF4C492771F4899102FF86075C
+:107BC00010AFB5D2ED48DB11F47FCE51BA83FFD9A7
+:107BD00013D789D4B07899C6E339BBE3C7C7FBC4D0
+:107BE0006FDA667DE7C6424865BF460610C7394171
+:107BF000E939660074DCCDE375916F5D328E730EEA
+:107C0000FEA0F43A6BA1E385B6458F3D0C756D83FC
+:107C1000FA8DE34407803F23FEBE3F41FF2201E48B
+:107C200068EFBF60FC0CE8379D4EB873CF852CD849
+:107C3000BFF848EE9E8BEF853C6F57211E51F9FC33
+:107C40009B284F9DCF1CC7F836E171F04ED2F38FC1
+:107C5000C52BF999CCBAED1E16FFE17480F890E6B9
+:107C6000C5721E07627C6DC487FA8B0B8D71B17370
+:107C700027C6BE40CDF67778BCA5976EC244A0D784
+:107C8000FB97DCCF30F0A0021EAE8D8D7BC68FC37C
+:107C9000F5C43D2D74037A42BCB327AE49D8137B9B
+:107CA0007561E1CD7871F4CE2D2C5EDA29C73F8F56
+:107CB00065C441AF7659E29FE181C53F2F378F2BD5
+:107CC000C5D3609786FD5AF175F6ABF8FAFD5BAE49
+:107CD000819D5FE8777FADDA7C1FE63D2538DD05C5
+:107CE000FB6B6DEF2B04CFA774B3732B7CBE67F9CE
+:107CF000F9D3B33F17312ED6143982FADDAA3F8C5F
+:107D0000FD572BBC7770786BF7B3F5E3EC5E4FD87B
+:107D10004DFB397BF839E4EBDADDEF635CEEE8AE7E
+:107D2000A7958E98F516D68F70CC7CCE3E79A8801C
+:107D3000C579E3DF1BAB71317BB3EE40FC71EA76B2
+:107D40007F6A1AA72A1451981D70E9F1CE48FA2DBE
+:107D5000D0DF997619DF4D3A1311E3BE171C70C9B5
+:107D60007C1FA195C90F5D47F19EC071767FA7F07A
+:107D7000B5043C577FE7F1D277E0FDB73BA95883C4
+:107D8000DDDFB682F169DB4FF42140EFB6E3DF13AC
+:107D900061FDDA07F88DB1FF8B4ED44FF150FD50E5
+:107DA000F46EA010D8D5AA77AE7DCB66829F8E9355
+:107DB0000EEB4223ED07EE83C0B939BC57EE9D565A
+:107DC0000AF088AA4D750A7DE721BBF97D55DEAF23
+:107DD000AC9AEF2190AFC66BD08F6F268B4B66CCE1
+:107DE0003252169F0C19F787CA13C2ABE87C7FAFDB
+:107DF0000637BB285E7C9E8DD92F1178276AA20694
+:107E0000F6D3632E7EDEC14BBCECBC833B64A37A0D
+:107E1000FD61FFF60D93089E67D8067CD9739E819D
+:107E2000440B802F8D767DEA2DE71D32E1132A5A0F
+:107E300022873317EE2550FDB26A86772BE41FF1B7
+:107E4000B0F7CDB248F72138DFB08DDBA3D960158C
+:107E5000E7F67DE7ECEBBE6F9632A578E9303F851B
+:107E6000D3F55F53E15C7CCA2DC54F0D5169852D5B
+:107E7000631ADCA34979BC786C06CDCF5FFFF4347C
+:107E8000ACFFF7E2B15934FF937B0EB2FA2A01CF6F
+:107E9000C1BEB0AE761AF0EFD796FBD9143366B9EF
+:107EA0007F05F0772EF0EE77176970AEA25BE1EFF9
+:107EB0006504A0DDD0890C7F99EE779F027F6598DD
+:107EC000AD6305F0EB63CF7F9184F716F9FBA12A30
+:107ED0006954E1DC152D9A78F112E7F3FABCFBCC7A
+:107EE000F5CB8D49C177813F9AE78DBC6F1A1DEFA5
+:107EF000E18A710E760ED0F24EA39A82745DC8E9C3
+:107F00004AF83DCB457C3E8BC590C202DFAD5C7F1D
+:107F100019EF51578B57F41E3587ABDBD5EFFB6755
+:107F20007F00783393827F00FC59DF3F7BC515B813
+:107F300000F519E55FE27D5CE33D33EBBB6844EAA5
+:107F40008EFB3EFB56FE2E5A7FF0FE9B3B28BA6905
+:107F5000FF392F687B8F51391BB350F1C3D1CF311B
+:107F6000CB0BFDD220C226047610A71F3CCF88F78A
+:107F70001FEE22B85FDB651774F0AFBBFE49457D8D
+:107F80009EB9703AFA5F5DAEEC089C33EABA5BC307
+:107F90007D3D8A0101E469E881C428F887541E3ECA
+:107FA000B7C8C3E766FE378FDB7551DBDF81FDA9FC
+:107FB000BC3F6AA0C5DC8BED12999EEE6AD0108E94
+:107FC000A1247408D6FD818E97E3E6EB37A7CF4650
+:107FD0009B9EEB9E80F81FEE8EC1FF2877BF74CC6E
+:107FE00077333AE6BBE3D0D1FA6EDD7BAEE058687A
+:107FF00077BAFC28BE5F677DAFCE4ADF3AA9F5218C
+:10800000783B2BEDC0A7B8FE18F41BB37C2CD2290B
+:10801000869E93008E31073EB501BC061D1FECE71E
+:108020003C79A99BAD73D6F1D2CA3A0607E3B49F57
+:10803000E5D64CF70E0A1C457E89CA69BA8DC587FC
+:10804000FAB6EFB7FF9C4B9DF32C5059BF14FF734A
+:10805000004F06FE6F75F3FBEA7DF17F3BB4A3F89A
+:10806000BF1DE63F00FCCFBB14FE0DFBBF8AEB87B4
+:108070002AD89FA27CF41FDACCB41C3AEE34D18DFE
+:1080800072B06487C8F731D9FB5F863E59725DFDD7
+:1080900021B817B9E46702F2EB42FEFEE527FCFDCA
+:1080A0004BEBB9C1F2B210EACBCB9F1F0CA33EAA97
+:1080B000DA652EFF6777CFBB975978DE172435AD89
+:1080C000F7BD4E2BFECFBBB9DE58E8B4C57B2FD72A
+:1080D0004887D6DB4CE7CC33A6F4F483FEA0CFA6CA
+:1080E000BD89F1B87F9509C4137429A510DE192044
+:1080F000854209F45BCCE5D7E86FD872F3FA9F1D8F
+:1081000032DF43CC6D31DF431CDE6ABE8778D56633
+:10811000F33DC45161F33DC46B768D33E54747AE03
+:1081200037B51FB37FB2293F36FA4D53FBF1C7660F
+:108130009AF213DABF676A7FED5BF34DF5D775549A
+:108140009AEA6FF86899297F63F73F9BDA471731FE
+:10815000FD78B8617911DC5B30F07278A96253A1C7
+:108160007CE9089B5A105B9EA66B059016E9E07FA0
+:10817000F5272F531C3F2A8A5DA78B896CD26F533A
+:108180001CE67CD46DFE7D8F972C7235A47E52CB7D
+:10819000089A1DBC240FCF6353F93AC6F5DBB10131
+:1081A000EAB7DFA07CD5469B206F952FE3BD019AEF
+:1081B00086D88FADB0779F1F729AF9D4D78F5EF9AA
+:1081C0009DDB3807D4CAFA53CBC64B263931CA3F98
+:1081D0002A8C2D17164FC77340FDF5ABF8165CB30C
+:1081E0007D10BC3B3C0F53A3BCA9CC16F7DCDF676A
+:1081F000EEBFD07FDADCC78EFA0CF07CCEF7DA2641
+:1082000038BF567B7B37FA511976335E7AF3EC5DD3
+:1082100063039E471A483EACF7C6FDB64534E1EB12
+:1082200036CE77D1DB33D3E09C41663FFE55A18744
+:10823000E9EB471B42D72C04C21187E95E7956B49B
+:108240006E1AF839C3F879EB4DB6F8E7A0923C0CFA
+:108250002FE9A048C15E50DD682F9C2B7FD70B4FC4
+:10826000C7DC680F2679E838F3C7B417B1FBD4BA76
+:108270007FE6E85EB80D7D94E50E6C02FD92E59315
+:108280008896DD179EF4DB832DF08E7863B2CDEFF8
+:10829000C67CB700E3D97F4CC8203A5EE39F458493
+:1082A000AFF1F075783EC8EEAEC7B8AB314FC2CF74
+:1082B000091871E60BBED98980CFC6AB7BEE07E10A
+:1082C0007B9017DCC176E8F7C24619C76D9C2C98E5
+:1082D000EA8D794B9BBF8DF7BEB2DC6CDEE574DEB8
+:1082E00000B73D93C1D5F8A8403211AEFFBDF428C8
+:1082F000F835FB5CF8DE07C5C710C0C7393DFB7316
+:108300009B31793AAF9A41EEAD6BD19E89EFA74E82
+:1083100037E6A18F34D13BE32A33FCE24619FDC690
+:1083200045496E3CEF106E8872FA9AE7DFE49BF9DC
+:108330009D5B295CAB4E88F8DEB6D6D1BAF428FD39
+:10834000AEBCCDE50F6B7DF17F4E63F052F8A77B9D
+:1083500040DE364FC3F9E3796A80FF31813C9C0DE2
+:10836000FC172C453E186C23B06FD3C74EF0307904
+:108370009EED51D97B35BE722687BE85D76CA7FD91
+:108380009579FA5DF76FF3B075FF364F9C75FF7204
+:10839000EF075797B51F8554D445B43708A91F1167
+:1083A0006B47533D560EFD1B7931F1C705D06FFF6A
+:1083B000769ABF6544F6E5ED34B0CF800F0DFBEC47
+:1083C0004E8FD9AE8CD1BB3FF430BDFB43CFC0F450
+:1083D000EE8FA1FDE9EF45E3DA35A94A7CBDF7B49C
+:1083E00087DD1FAC531582E703FBD90FD8C9E5DA47
+:1083F0003AEFFED6A5CBF91F392E834FCDFAFEFCFE
+:10840000312D11F454CA0742DC77B7862CBF6D3C7E
+:10841000D06B9BAD7833CCF76716FE78684D9FF52F
+:108420002BCCF1188E8BC76A8A479B098F3B3C97F0
+:10843000B00FBFB6BEAF30DFF3E9E4F8A67ABF09EC
+:10844000C63B37EBBD22886BD4CEF91CF5FED71E98
+:10845000A7CCBCAE187E391D6705E0A173D69F7905
+:108460007CAE03E34AAB9EB92A11E25835930D7AEC
+:1084700044F07DAAF3F939489773FBEC3AC0792EA2
+:10848000999D133DB7EFDAA310F7F8A4E158722CC9
+:108490007DCF3D79BC48A6FD9DDB7BBC48C2037700
+:1084A00061D33BD435177F5B1470F7DE4BE8E137BF
+:1084B000075B8F363A597CE54138173786DABF6A51
+:1084C00012F2657A9AED5E28171DBF1DFC215C39FA
+:1084D0003FE62FA659B24AD03316C17ED33C37EEC1
+:1084E00067F972C9C86CFA9D12AD87E3CCC4F96A0A
+:1084F00098C0EF04B84E44F1F7023CEF7660F83EC6
+:10850000F143B2029EC2FFBD1A3C09784F3AAB0953
+:10851000891AC4778A6E1E4753690AD3BFDDB73AFA
+:10852000F0F78C8405AFAA53A8FEDA3C93FD8EDDEC
+:10853000F9630B92C01F695599DEF20DEBE163B44C
+:108540008B07E76B371723E6757C574055191D924B
+:10855000336C6B8A358CC7F9F398FE25521AFF3DB0
+:1085600029CAB71ECDA6431CD8F8CEC5BF2B52FCD6
+:10857000BFCE037846DBFCF04E8FFBAB6F38CA9260
+:1085800069FBCC28BE5F5E94C0E19DC3DE07EFFBB4
+:108590004EE345D37D18B5D4FC4EB727D0B414E2D2
+:1085A000FCD0EF6DC9F8CE8BB99EA2389196BB0B6B
+:1085B000CDE5AE0A9A8FE147EB77D6F6865F92AEAD
+:1085C0003238F63738100FBF6C50FD79948F0E3467
+:1085D000F8307FB041C334DA3012CB0F37F8312F87
+:1085E000DAF46C984FFAAF7F9014BBEEC2EF549D53
+:1085F0008CE1C37572E4ADF9808FDF8888AF15AF69
+:108600008E47FEDE349A8E3A86BD677332C6FEFE12
+:10861000E9F257D24A285F0DF9D1AFD34AC6C3EF6A
+:1086200096B0F31770413AF61EEE7A25A0F993E062
+:108630007734C6343B86C2FBA4C15BC9589423FD82
+:10864000C589F0BB0B7B336CB47E9A94D7ECF807EA
+:1086500080ABDE64E7AFE7E7331F9F6CD6AFE3BCC8
+:108660004CFF660AC5E3BC71F8097E5300FDAC39C6
+:10867000C6B907331E8954BFE1768AEBE6EFB3DF54
+:108680005F4854C7FBE1BDF7CD5EC3CEA9F7C5BEB9
+:10869000E7BE99FF0E44E2E1256817293EF63B103C
+:1086A000290A7B0F8904934DEFEDCDE5FDCC06063D
+:1086B0009AD0571FCFE6FD151D790EFB83DF9788F3
+:1086C000F5EF87F0DFC3D8CCF5D3743550EC4DED22
+:1086D0006D67D45BBFEB59776D21D10BF6430189F0
+:1086E00080BD04ED8A69BBD40F0302DCEF33CED723
+:1086F0003E0BF8CDEFFDDD937D02C3EB933C7D8A0D
+:10870000FF4E49D4139807E3FB163C12DA0376CAEE
+:108710003EBB06625274E48FF87E94F83BC501E7D5
+:10872000FC530FBCCFEEE5D93A1438BFB8D25B7C0E
+:1087300013C45145A53E03F3F74E6F81FC839EFAA7
+:1087400087D8A3DDC537011FA4F3F706080400018D
+:108750000E08AAE18F63FD43B34E65649FCCF22BF4
+:10876000BD37368732215F3F0FF808F28DB4BF7DE9
+:1087700049C121C0476EE186E6633742DE687F0368
+:10878000B6FF895765FE8F3B980DF64A4F5EA57977
+:108790004F4C5E6279E260A931BF9A237FC473D0E7
+:1087A000B507D83B5DA907660830CFD4FD3310FF6D
+:1087B000E7D5B7BC2B348C878F60EB048B971BF409
+:1087C00030EEE1A6D983F77963F8619DD76CC7C411
+:1087D000DC27BC0FF0DDD31F8FAFCB36F69E4AF7F8
+:1087E0008FD8EFC60D037B5484B8B986692EDCA3FD
+:1087F000A7FEC170125C3998D65FE3CD413A5EB5F1
+:108800003BFBCDA95A2F5FA7642977803E4EB5F870
+:1088100035D95C3F8F508B7F93482B370AC1B5F019
+:108820009E6C688FACE27D935D19284767B98E22F4
+:10883000F583315FCDEFBFCB2B836B47811E59C4CE
+:10884000F46E5576A058A6DF573D978DBF0B67F0A5
+:108850005D5552246D9CBBF75CB791377E47E42190
+:10886000B5D509EFF218FB5AB5FB3764C13EFDC719
+:1088700087DE463B71496236C259D3765C81DF6937
+:10888000A96DA37C47BFFBD8D963C7A35FF287C894
+:10889000A06F02BEFED068C3CBDDFDD9552F52FDBF
+:1088A000A6D385EA688303D39D7AFDD5E00A9CF0C0
+:1088B0002EB8C949F9E9F11C5D05FEEABCB71EF501
+:1088C000D8E38A3A0AF8AFD3FBC366E0E7AA24915B
+:1088D000F3EB0F5FD6F3F87E3DCDEFB9B7EDA6BF52
+:1088E00068DF60A1D9FEA97BC48DFC41ED92DF0257
+:1088F0001FD56EB68560FDB339DAF1BE7327E81B6C
+:10890000D45FE6FB991B05A60F4373581CFA72F758
+:10891000342BBE7491708CFDBD2491E9AB0A29847F
+:10892000FB76155F7AB1FE2F1FC769BA0FDA771C85
+:1089300037D61BE354F78E837C52FDF661F4CF5F8C
+:10894000BCDAB0AF75D4FF773EC5CF6138F574E8B7
+:10895000E741D9D027D4CFA47886E71E793E24F901
+:108960000879A947FFAC6D2EC904FAF6D613B37E79
+:10897000D2254AB79712783E747F73C9A438ED1395
+:108980002CED738CFC4FB17F2B3C0F3A7BF30EDA4E
+:108990005EFA93BD270FF06DB059FA4B36C6DF86ED
+:1089A000FD19FCB7C7BBFB6578EFE9A5A440F11042
+:1089B00066DF6820875B24157F87D1C0F31EBE3E2B
+:1089C000557C798D09FFBD782F30959F6ED04CFB7B
+:1089D000A18B172EC37B3F7BF83A564142EC3EDB1E
+:1089E00023B9A67DD0FF0FC7D785A3B81F384AFE8D
+:1089F000C6708C32E9815E38F24DE55F170E316941
+:108A0000766936EC53ADB1A19F90660B3972C06E9A
+:108A1000FB5FECF71A203407E799A8616CDA57CEB0
+:108A200039609F07C6798E448E49E3409E746D0578
+:108A3000AC533F91D0AFA1E50E3919866ED5E1FD5B
+:108A40002B2A95D85F4E75B08619F5E6776287AB0D
+:108A5000A458A2E5E3D579B8EEE594DD5507F6FD17
+:108A60003677E1CF571393BCA27DB25A588AF6C726
+:108A70009AC4179B61DF383D81D9330279B1F95827
+:108A800046BC7A26AF2DF7BD7813C431B6AED4AE4E
+:108A9000067F6EAB331C390CEBF93D6EFC3DAADC56
+:108AA00075E116F8BD0A71830DD74B3129BC6B2BCC
+:108AB0009C177860841FEC8BAD60D740FB356E5CF3
+:108AC000FF5B1A42682FAFE2EBC0F6F5935438E72C
+:108AD000DCE8969261BD6B91EB6F05B85EBAEF640E
+:108AE000B3E33AD063FE96413CEFCB80754DCB713A
+:108AF0008CE5F514195B576883C18534F2C3FF44D4
+:108B0000AD12D43327D10E6B742FAB043B8ED6BF7E
+:108B1000ECA0787A3C99E385D7E7F4E8A593CDA05B
+:108B200007C515BDF9123AEF1D3F637AEA09DA3F2E
+:108B3000BC2B45E713827718BB4749E8872524C13A
+:108B40006FC7D074740EFB9D5BAA17BDE8C7493888
+:108B50005F631F4919C57E0F1DDAC37A9390918315
+:108B6000FB98CA0CF65E83E271E3FD66E37756DD9F
+:108B7000C4F8A7B37829DF677159DE4370AE5F8907
+:108B80009BE94E783721864F15CB7B0B1209CC071A
+:108B90007B4B54CDE5BF49E4FB4A83D8EFAD0EB71C
+:108BA00085D02EA35284E935248AF6D968D281F97A
+:108BB00031E06DE6C2352C0D2F8E8D27BAC8E2BB91
+:108BC0000111ECC7B45B8D784CF0F544BADEBF966A
+:108BD000C8E336FC778C536614E27E7D6612AB5F89
+:108BE00015C8BB0FECBC8D33A6619CC6B0EF8CF5ED
+:108BF000D2B0DF16729857AB425C7BC1B0EB163A2D
+:108C0000593E75B6FEE068886BB6530B341BEE2FE9
+:108C1000B3F86AF9E6E234B0CB161EBA15EDE44CAF
+:108C200095D9658B36CE5082A3E1DEDA3CF4078A13
+:108C3000374C48847D84D54E7FE27585E867E2FB3A
+:108C4000B903B5C7B6A65D3519E471AB8D1290CAEC
+:108C5000FB4BB2EE1E0B7CB1210FEDCCAD09C1C6B2
+:108C600024DAEFD67FD6FCAB68FEA74EBDF0388C79
+:108C7000B33A81D5C3BB51C09B3DE712B6E1BBC936
+:108C8000FD8D6F3D97F052127B7FCAA8FF6F537E18
+:108C90007C7D0080000000001F8B080000000000A9
+:108CA00000FFBD7D0B7C94D595F8FD66BE796566A9
+:108CB00092C963F2220913C24B5E4E9E80224C126F
+:108CC000C243B44C102A20E8F03490A7485DDCBAC7
+:108CD000FF0C043050B60657112BEA8462C5AABBBC
+:108CE00041A31B35EA8080B8D66D44DAD216FD8FD9
+:108CF0004A1510488AB5D2FEDD65CF39F7DECC7C47
+:108D00009319F0B5FFB4FE3EEEF7DDE779DF73CEE1
+:108D1000BD73E912FC4D612C94A43056CAD8C151E0
+:108D20008CF58C618CA9DE2406CF4D066FD2E2341F
+:108D3000C6FA7EA367BBE1F517666F92C3C6D82556
+:108D4000D12EFA79AA99B1A089B1B3CD6E161CC102
+:108D5000D8996633956B961F98C6A09F9A0E85B9D1
+:108D6000F2195BC5DA36633FAF3B9269DC55013DD2
+:108D70000B8E64F47709FE5BBDFC28D55FDDC9EB83
+:108D8000D7B20EAABF92314F073C6BF75A59D01C8D
+:108D9000AE5FDF51AC691F4AD251BFD725FB063BFE
+:108DA0009C8CDD5B3DFCBE2A789F565D62F6E1FA45
+:108DB000588EE313ABA8AF87F73AE6EB88B1AE77EE
+:108DC000045CDE49828A4EACEDD0B132C6D63AE0C0
+:108DD0009F2EC61E50D87C6CB7F6F715192963C2B2
+:108DE000EDD62A9E0CC798F8706ABCA86781D48813
+:108DF000B2DA67C4F5355E34D2FBF30EB35F0763B6
+:108E00001EC9F43F702DAC7F26EB5319CC539F90B5
+:108E1000388E5DCD588B2571373E67BA0C7DA10821
+:108E200038303353717E33F82BF6EBC469479471B5
+:108E3000D83E40ED67D98EA90C4073C45E7303839E
+:108E4000F737B090CA0A06CE0FFAFD28B2DF5923D1
+:108E5000B5E51BDDDAF2EC09DA32637E82D74F9A90
+:108E60009BCA4E1AC2FDFE04A6D611032EB70258A5
+:108E7000B17EED5E4BE064041EEB3B9235E5C6AE81
+:108E8000ACC0C988716AF11F59F05F135F779D58B4
+:108E9000F70746DFAD0EC05B3D0B1971DD40C146E3
+:108EA000EF58C6AC16E6457C1DD86FF1B012E8CF7E
+:108EB000666EB7007C1BBBAB9525F0DE6A87EF3092
+:108EC0003F2796E16935F0FA8C05880EE08FDA3994
+:108ED000BD99ED5B15E413B7ABDAFECDE7DD00FF1E
+:108EE000DD93024F953DAC2446ACA30ED6911E5E99
+:108EF000C739EB0765882F58CF6FECA5481746A6F2
+:108F00002485D7F3ADE1B55C0BAFC65D36A237184B
+:108F1000E7BD4418A761A7CE6F84B2CEDC63447E60
+:108F2000B917E93C06DE721C4A4C3C6F433CC7E073
+:108F3000A7EDACFC3EE4C71CE41F18C7B6EE2765DE
+:108F4000278B818FAA3717FAA0BE4D05FE86715474
+:108F5000F8BFA908C8D93B6D5532D0E9293BE7C312
+:108F60000D892E7AEE50BC0AE2355DE7C947FAD585
+:108F700027B843CCC1F1A366421960CBAEC162F9F8
+:108F8000BD1EE8EF21981BCB168409F078C8C2CB30
+:108F90002F39CAEFDD08E36E4AE6E50D3FBDB9D5CE
+:108FA0003F09CA16599E43E5870C6D413DE0DDFF40
+:108FB00082C9F5443EB5F728585E3032F0044C4D76
+:108FC0003F8465235EA62642E720B7F42F9A769B5E
+:108FD000A05ED0EEFB2784A75CFF39FBF13C362670
+:108FE000667F7E4D7F79DFAC3F18BF537775F8FB06
+:108FF000D4C49D413D6FE7C2762CA7E7033FF49FA1
+:10900000FEA2896D85E22306769B17DAD55D2C6377
+:10901000C10839D423F079B6D941725BBEAF43F9A8
+:109020003D06F9A987E4707D47AA46FE4AB95C7FF0
+:10903000F15A4D7F398E7CC257BDDA43F2ADFEE264
+:1090400064FA1E12F2F46C7326E989F8E30CD2C8B4
+:10905000F5F0381359B0F872E34CA2EF721CE6CB6E
+:1090600022B9BD06E70C24A43782BC87712E0C758B
+:1090700025255F469FD976029145AC679B1A3463DC
+:10908000FFDBDC071CBE18FC20E544B8BD51DB1E2D
+:10909000F4231B81F4ED6348B7FFAC7ACC91FAD48A
+:1090A00066F038506FA8F68A232E37344D7E6486DA
+:1090B0000A286951393D7FD9B681E8D16E701F41C8
+:1090C000FCDAED3A971FBEAFB7E93C48272D0E7387
+:1090D00000F1BD51B9C1817243F66B07318FF3B80E
+:1090E000601B427A3DDE7AD58B89540F669219A9AE
+:1090F0001FFFF7C683C5170F1C8FBD31F1880BFA10
+:10910000574B746E0BE00B91FA71041D44F763DF4B
+:10911000A9C69C77743D09FFB8F836841211FEE7A2
+:109120006DBA198118F32E4D56BE9B9E5A1425DF39
+:10913000937F3B3C88ED95D00F0AF249FE9626A31B
+:10914000FC2DBC9058E922399FEEB573B185E3B68A
+:10915000D88E9A7DA48F98ED13D9BF3E3EFD49B8B5
+:1091600018DEAA64881F6004867AE34A70B02B4137
+:109170002FE29715AA0CE5D3403A6FA7F9F4D777F9
+:1091800043E711EB6F51DD0EA46BFD751E33CA99D9
+:10919000F58E39E6109437AAAED9F92087FADE02A7
+:1091A0007B12D6B729ADC81C8B8F5AC16EC4F92D5E
+:1091B0004DD669D6239F661DE7DFE8F75B92B99E1F
+:1091C00068DD3FB1C753129F7E40D279518F9BCB50
+:1091D00054C756589FDEC0E76B896307CA7EE3C158
+:1091E0006BCB7E0BC96975A83980F644F4789B5423
+:1091F000778F07BE6F82F9F8B19CC3C7DF54A23ADC
+:109200007643D71657023347D437384B08FE176CCE
+:10921000694C0FDF37213DC6989784D3BCE4EF68D3
+:109220003FF9A2E832F7B7C3D9100D5DB6C6A2CB9D
+:1092300079A8374BF9FC993972FE4393BE8E7C8C2A
+:10924000A69BB249CC837C9701CF76586FA7CA669C
+:10925000EC437D80B6D64498DFCD36E600993E39A2
+:10926000B57C6732ACB7ACE78091213F743A691D99
+:1092700075A27DF4B8A6148E3F538A839E49C73DDC
+:109280004F4F01F876F624B814F8D49902FA300654
+:109290007C8F08BC33D6C69F6A681CF28FAC5FB661
+:1092A000887976C3F350026B3583BDB24FC807C6C9
+:1092B000EEE74F151817C699FDCAE8DD642F8AF549
+:1092C0001F02B580F5D3D343E314FD77C0DB5E58AE
+:1092D0007D04DEEACD21C2DBDB46DF6B089FC6E3FF
+:1092E000A1742C771E3D9387F870B670FBB5EF25FF
+:1092F0006B00E96E207ED6D3FCEA2E0E62FEE28180
+:1093000078AB5383A45FEB2EE6D17758B7DF9C127E
+:10931000FE3E1B6C8609B02E66E67042F8C4C2475A
+:10932000BBE06B890F50EBA3ED021F08A78FC43E73
+:10933000A71FEF4EE36606783F6BE6EF996724DFE1
+:1093400087097DFE51425E00F7331F0D07CE467A36
+:10935000505DE9917AA7CEE2B96F3EAC9BBDAB6799
+:109360004FC06359A5AD15EDAB65264F12DA5DCB45
+:10937000DED32BEBF30984C4072B043CCF32F75D1B
+:10938000883FFF368BE309C29F76FF97BFA3BCF8E7
+:109390001D68BFA24BEF46937169A5CD8FFD96F571
+:1093A000543C6D87F72B5BAD2E06FD2E9BE2FE0431
+:1093B000EDBD65F7595C1BF271BF38A43C0BFA5D3B
+:1093C000FB60BE03E581759D37D3EC0693E07EEB31
+:1093D0004C2BE06D93B264895208AC7D7FCA1615A0
+:1093E000F0ACFE57E56716285F757FC116F3758CE4
+:1093F000BD82B21CED59FFD09968DFFE12A746F678
+:109400002EB76F7F794427CAC55BA6820A18E5ECA0
+:10941000D4D960CE2B538AB79861FCF4144FA10EB7
+:10942000C65B93326126F6B7F4BEB17FDD09DF7704
+:10943000A4CC9AA9E613DE447BEFCCCAA1D06E92ED
+:109440002CCFB354427F695616B6A72700BF0F0929
+:109450008F8FF67767BFFDBD60E6D41CC04B4553C8
+:10946000A50AFDBF9E72DB9631573136FE817287A9
+:1094700007C63F98B264A615F0DF6994F5976DF1C1
+:10948000C0589DCCF78601BEFFF1FEBA9966A89F31
+:1094900096EA2D74C0FA53CDF76F9991FB1DF865CC
+:1094A000A412BD4F2C487112DF1C4690E6ADEB3381
+:1094B00072FD2AF83D87D3717F792494ED11E54C34
+:1094C0005EEEDC105B7E9C4EE572B93321F6778F41
+:1094D000904B00EFA00EE9B3CB1A18961F9627C049
+:1094E0004FE609C45FDBB93C01BE9A63273E8ED9C3
+:1094F000DF37E55F803BF5D3A97AACE8BF90720D0A
+:109500006666C571BE4C7669E47559CF5292B7BF95
+:109510004A157CEBE2F071566AE50A33F70C47B85E
+:10952000C8768BC53AF3474BFF52D088FCB9D6E2D8
+:10953000C9C0F9ACDD579EC12E6387D75D2CD7F823
+:109540004BC2EB984AEF07F40BFDB944FFEE315FD5
+:10955000075EC95780571A7DBFD23AC3FD69FD3BEC
+:1095600003FBE37E9E017AC5187B9E1B53B85E41C8
+:10957000F8EB22E4DA4A215F416A913D7EFEC5ABF9
+:10958000766FCD8F1C7703F50FF87D7A0AEE2F41A9
+:10959000BEA21C2B533DB3B07E594F8A03ED79A078
+:1095A000B78D82DE54A43789E7CE94A6725AEF763F
+:1095B000C5B13B861DF81339AF36C583F649C622BF
+:1095C0009F7E49C4FCA4FC87FE3B45FF259C9E1F53
+:1095D000EDA7E7C5C83FC22FC4DC40DF6307CE5FFD
+:1095E000C136CE08FDF5822580F39170FBB6F42FCD
+:1095F000ED87BAB87A2A91DA651C0F26BAA09E21A7
+:10960000C5C5F9B9E3E3C46B515F75E999E2E2EBD3
+:1096100046B95126E5A4BFE748854A764C582EBB8B
+:10962000C89E917233683687EBDFBFBD67C646942C
+:10963000AB26BE2F4FD383142F0ACFE3E514AE2FF2
+:1096400027F89827961D7824D92EE508ADE3E17513
+:1096500095EC63589F5DE8D709213FF9B39E4C66AE
+:10966000C23EE1F090FA7BB629F4AFDC4FA6A547E5
+:1096700059063BA5415710EE1FBFCF89A0FB63825F
+:109680000EA2F1F35DE513C0C18F70484DE172C8C1
+:10969000096505ED0B15F417C0FF5CB5CDBD353F71
+:1096A00062DE362E8F9D7A1D976357E08BB454FE91
+:1096B000BDEF253BF173181EDC8EF92F01F7761DE7
+:1096C000ABC17DC1211DF009D2A28DAFF3FC8B5936
+:1096D000D4EFE7293AB9FEEF452EB71B613CCED750
+:1096E000643FD6BF3CA85D3B7FDEDFDC544E8F6518
+:1096F000C73D8568C70CF3DADCB85F28EB9973C007
+:1097000000E5E1DD8A036B4B3A1FDEC1F914A84B7B
+:10971000C0E5AD6722FBB5A5723AFABED631FC387A
+:10972000A757C4CBE2083ECD4DB57178C1FA4C08BD
+:109730004F552B47E5F3FB9B87F78001D65B07F07E
+:1097400040B12DE1D6D9B1648305F9F83873231FF0
+:109750009FEF58A21B8B78DDC9C8BEEB970F0FF0A7
+:1097600075487B14E8B203E9F2EAD45C1A6FD87149
+:109770008F750C7C1F867613FA953BEC01DC574CF9
+:109780004EF5CD4D4578CEEDAB64204A1AAC4DEB8D
+:109790002D11EFFBEB77417DA2639F7E2CCEF3363C
+:1097A000C6B6BAC2EB81A9FAD11F5A6F043E2DA0EA
+:1097B0007210E1D669E4F5FB16338ACF34E8FB8CEE
+:1097C000F81DF4F72CA2CFA3BA14C42FEE9BD06ED1
+:1097D000AED37B7314DCD76798DCA807601F42F414
+:1097E0007EC8C2540BF4FF263C514E57E9EFD88F88
+:1097F000F0AA2A50DC2D24AEDA85DC6041DC37CDBE
+:109800009E62257A645FDD39B41AF5BF95E309FAE3
+:10981000318B7ECCE6A230FFFD3AEF2ADAFF48FD1D
+:10982000764851A89F43D78DDEDD12B12FC2FE507E
+:10983000FE1F52AA73EE40FA17FB3AB20FD3C27A58
+:1098400017ED95225B24DEFD627EA13CA4A3487B3C
+:1098500014EDD37E7BD6DFB1653AC8D9F1333A82B5
+:109860003A0752D1F333FF01D65105F6AC05E0704B
+:109870005B2A973387F2FDFA449CDF30583FBC3AAD
+:109880009CE01BD3640B8F932EFC0FE946EE2F4810
+:109890004FE0CFBFA7723BE727695C1EFE218D9783
+:1098A000D31363FB2BBE10F55413971F5BCBB9FC8E
+:1098B0008FAEB741F4FBADEDDE318A667F0F76EFF8
+:1098C00086546EF71AB95F88C713960AFA063B8763
+:1098D000F014B6AB783C50DAA15FF4CCA3F272F38B
+:1098E0007BD9E8BFBFED9FE6DD87F4B6F2377AF2A9
+:1098F000579C14F18295C9BEF464DCBF27C4F6AB53
+:109900003C27D675BA99911FF8538C1B82EC3D8980
+:10991000714328AFDAF9E034E4BFD52C40FEE0E52E
+:109920003B37515C707940612E05F7695EEE271672
+:10993000F858BD47AFF14BDFAE361993C784E977CE
+:10994000459B366E58B3AB5853FEF6F669250B446B
+:10995000C8A1B0FC9946EFA3FB95F41E6DA77ED479
+:10996000ECD2F8C397EE1C46EB97F5973137AD77FD
+:10997000596B8166DEAC95F349BCF949BA45BBD455
+:109980001F739E46CDFB8F00FEFE08FFFFD25343A0
+:10999000691E2DA9BEFF40BA09CFC3CAFC1ABFDA9F
+:1099A00024C727B05666E17E49A023FFE5EC81502D
+:1099B0002AA7FF6F0FF7D171F605E3FEBFEE0BCAC2
+:1099C000267139CCDA14360C1EE3A76AEDB4BFA0B9
+:1099D000BE2BC5A795EB6B61472D5FA4AD7751D426
+:1099E000BB28EA5DC9BF12699F290528D7787F0D7A
+:1099F000828FF3CF1C35BAA0DEF8346EC716393D1E
+:109A00009750EF6CB3248E437FCA364B5E00F552FD
+:109A1000FFFABA381D6D33483F8A3B03E1D6FE5F3B
+:109A200077B6A888C77DB00F007958FEE841168A3E
+:109A3000905337AE533CCB01DE7621EFEADC7C7DE0
+:109A400075EEA07128F4935DC7E795D3B15F5123FC
+:109A5000DAE5D4087F5F9A41B3CFCCC1324E258D71
+:109A6000CBE39C9AA03214EA65EFDAA3A8D85F870B
+:109A7000427A33BB0900134157D925DCBEB9B1A4E2
+:109A80005D5936260C87565DF51807E0A735DDEAE7
+:109A9000467D738FD337240DE7792218C4EDFCF887
+:109AA000133D2ADAEF3F757A0AD29C6138B8F48EFA
+:109AB0006CD4A7D6137C9E6DFDFB63AE6728A24DC8
+:109AC000FEABDDDC9ED1B3238CDB87A4AFD2378C19
+:109AD00024BD27E7979E22F4453AF33D67A3FAADEC
+:109AE0008CF0C9683DE91B86EFE6F62CC7775581F7
+:109AF000770FBEAFCAB8AAA805DE176C0BAA4BA198
+:109B0000DDCBBB62FB83CB853E81754CC2F5C9754D
+:109B10005C492EC87A86387E0AC90FD619B1F71F5C
+:109B200030227D2F7F346D21CEB76EA39199943072
+:109B3000FC7FEAF4CEC6F96477B42B081BE9DF9307
+:109B4000E34AFF1D7E47FEFCC828F996D35F5CFE02
+:109B50005FA7F72C8F94671B8D8427693F87E7C722
+:109B6000EDFDD5695CCFBEEAF42EC1F934746D27E2
+:109B70007FCFAA3D1F1A63F9ABA3F9E24A70546A7A
+:109B8000F8BEA06EBE3980EB2F7F54253AA8DD6861
+:109B9000A43859DD33FBB89FE71EE6463951D7B1EB
+:109BA0004F590EE3D63EB34F591101D74175010508
+:109BB000E733C22EF990CBAF68BA473F32DA2D8730
+:109BC0002D5C4E9C2DB7F91580EB5983AF0EEB9DA4
+:109BD000CDB2BAFDF9613CBCB96FFA11CC37B03FD8
+:109BE000670AE2B355B73BD30CF55A4719DD485F16
+:109BF0003F75FA36235C52546F27B64F4EB3BBD72E
+:109C0000435B978915A1BCFBBA70181F4527E3EF8A
+:109C1000E1FCD3857288DB9145C83F8134BBB4A792
+:109C200048AE1D36F0753CC7F87CFF9EEA7990E897
+:109C3000F8480A8D9B5D1754D09F9D7FE639926B43
+:109C4000B2FF309D791E89E4DF2BCFB3C388F45671
+:109C50002BE450F9A37B948F23E6FD4B30F4916EF7
+:109C6000B29F01BAB4D1F7FD33D3A83E33B9F0BDEA
+:109C700042ED6AE1FB8A087923D71143EEECC3F584
+:109C8000D84EF41CE47227C8FD8D62BED1F87C1555
+:109C9000E51F7C9A06EA99DE1BFD23312E7A78486F
+:109CA00002F527E54034DFBE2AE81CE5A5CE46FED6
+:109CB0005AB22BE5FC64BD2267C5FE3482430FC156
+:109CC000A17E974AEBA9327A87DE11C10FBF16FD3C
+:109CD0001DB8F90323CAFD07FEFD5DA2C7FA36854C
+:109CE000E2F1ACED5DE33CD447FEA7F46867CEE259
+:109CF0002601DBF1C2BB84A7599D5C2ED777EE53BA
+:109D000097D9C2749A7FE6C0AD4867F51D2686FBD9
+:109D100022A0BFDF207CA2E954C247CADD78F8B494
+:109D2000CEE07294F98DE44785FD543EFA29A4DC17
+:109D3000FE7BAA4EF809F8FB0B69BC1CA61FDFA727
+:109D4000088FB0DCB5105FE49F293A60C67DB85B30
+:109D5000213F7F5A258767E4BCAAC7C6979BCE548C
+:109D6000A137D450DE1C7B58BEF7CB7FD1FE0B81D0
+:109D70006F781FE4EFD910D4F372FED1F8CB77726D
+:109D80007D1B83CEFE1BD711ADDFA43D20E9E6C9C4
+:109D90005DAA468FD89D46EACF0E1B739CC78E7274
+:109DA0001ECFD861E0FA6CC77A7300E5C99B0B78C7
+:109DB0005E997DA13188CF43BAA575F8FD50361F55
+:109DC000BF55A75B83E5D60D36D64278F5243A4BCE
+:109DD000917E1219978F5C1E3EF03C9767757E5BF3
+:109DE00080C13FEB7C739753DC39CDE2C6B833F3C7
+:109DF0001D34CEB30FA42BD773FB8D2E783FAB83CE
+:109E0000F39FC403C853A22FC90F12AE617872B872
+:109E10004B7E92F8F8BBF46703BD7CA7BCAA3DDA81
+:109E200078DCDB46DFD54EBECF3A6C70A19F86C78B
+:109E300017E2D16FEDBAB7B34F821DB53AF32D7A61
+:109E40004ABE85FDAC86BF2709BC1738B9BEAF74C2
+:109E500072BAA92DE920BEAC3DD944FC6C9BC1E58A
+:109E60009AED84561E33F6CF62BDDBA85D95B563CF
+:109E70001AE677543DAE3870BF1F4F6EDEAEF0FC71
+:109E8000B84F77BD9188F972EC2BB0F2319E62E148
+:109E9000EB9DEBE472E2EC5E0038D17B93F172F65D
+:109EA000FB95FA63C1630AC2B356C0FAEC3395134B
+:109EB000FF847EECBD49EE61B0E4CF9EB9E9EE3F90
+:109EC000C1BCCFEE99E246F7655A8B97E8A7CF69F8
+:109ED00071E37E03C4F70CF417AEEF7823F15A68F0
+:109EE00077FAE9AB8B506ED78A799E795EBF0EE127
+:109EF000B2E1C97F9B8CDF6B034AAA09C7D9FBF883
+:109F00007F6763BEEA9E46F217B53CFDBA11F317B0
+:109F1000748176FE7E6F9203EB9DFEF9F6C908EF21
+:109F2000968E16FA7EE6E7ED543EF0E4BFBDF67776
+:109F3000F4E37813DD58EFCCF3FB092F753E95F26F
+:109F4000DBE2D1F58E7DFBB9BC443D8F7C309FCBED
+:109F50003149D7927E4F3F79DBC448BD21DFB70A34
+:109F60007F4E6B02D7239F09FEADADE0F1CECF9EB1
+:109F7000B5CCA7FD8131341CF7C57563385DDC2D88
+:109F8000E051D77187A1C146EDA99FDF02DFE373DE
+:109F90002CD0E72723298564CF25CAD7F957AA0FE4
+:109FA000F526A0BFE7E6451F2A381FEB9826432D6C
+:109FB000CDF369FE1D561DF9BD6C6D6C3FFBBF38BE
+:109FC0006DC22EE07C90DD599DE3223960720F8BCB
+:109FD000B087B36B7C2D1827BE7EADCFAD073CBEDE
+:109FE0007CEAE8B441507E72A4524CF8D72B5CCF87
+:109FF000F96D344E3DFAC1818F760B3E497730F5CD
+:10A000001A9203DC1F50A532D5467EAA3E9213F564
+:10A01000AD420FEE117E6E735FDE4D766A67BB2632
+:10A02000621F06ED6C362AF7E5FD10F34A67F8E784
+:10A0300093DE711969BE67A43C607EF27B4A7E8B19
+:10A04000F61BA1BCC1FCD1579DE55D281FE5333D42
+:10A050008EBFE4EFE2FBB8744F17CA15B63755A3AD
+:10A060000FE2C99503379FE77AFB950F890E1B9086
+:10A070000E717CDF498DDE5E4EC215E8F0A50F89BA
+:10A080000E977771F9DAD0556EC4FDD40EE1D76919
+:10A0900010F4847484FBE8BF3A93699C86C9A1E1FB
+:10A0A00028A7CE0BBA3BFF12A7B7433A1DF9010E02
+:10A0B000ED1EDDDEA20CD48F4A8D97F0DD00F8E6B0
+:10A0C00076F3DAA36867D5D73037F26B43A7E0079A
+:10A0D000B07B11BE0D5DD5CBB1BF416933C9DF0D7A
+:10A0E00076C9B441506EA863A5C86FD9BB2A5E4239
+:10A0F000BA605D7C3F9E5D03F62CD24D5ABD5B9FDE
+:10A100008F7A8FDBBDD78F2CA3F63B725D14E7F2FD
+:10A1100057318AF3EF40FB19F55DD6686E3FFB3689
+:10A1200092DDC55C09E437653E750DD66FF02F6290
+:10A1300094D711CDC72F29B40F680858291F685626
+:10A1400017B77F1ABA381F9F93F0914F43CFADE4F2
+:10A150008F7FC1C4FC11FED0375F9ACEF5EC8B2601
+:10A16000D2B39F357BD8C7B0A0B785BC9770AC6D14
+:10A17000CBD721DD32769309E7B14CCCA3CDC0F526
+:10A1800046B2D00305DBF83CD474E1774CD789A7FD
+:10A19000519BE7E2F0937FE19C188FC8225DE8397C
+:10A1A00018BA7E7990F8A4EE19DE5F9AC9537867E1
+:10A1B00004BD4AFB289A1E0BC4B8D9BB0E2A284CF2
+:10A1C000B277CDD1F0F9F5352CD808EBBC7E972EBF
+:10A1D00038651CD94D0B499EAF37B258F92A23D2A6
+:10A1E000B9FD5695EA2D44BF76D5CD3677A43FB953
+:10A1F0002AC1A3B3A01D5724FDD8DE128C1B9D4A93
+:10A20000B7BB116FE3D25DD20ED3D85B03F7DFDCAF
+:10A210000EBCA1CD3F0EF71F81F509F329AE09DA77
+:10A220008DFCDC0E688FFBF7DDD7FE9CEFDF5BB8A3
+:10A23000FF020407C999546F09FA8F9D05DEB55CCA
+:10A240003FD9DDB1D6F3AA93AFE7C0CDB716E23E52
+:10A25000B161AE8DF8E1815794A59CDE4011E2BE5C
+:10A26000DAC7F983017F3CE1227A243BAAA1C91B0A
+:10A27000884D8F9C5F1AC0AE423B1BE8710DB793AF
+:10A280006D8CF313A74BB9BF47B91569CF4A3E8D03
+:10A29000E67B49BFFD7CFF35F9FDBC81F3E37980A6
+:10A2A00003D27B3F9DBFCCE97CEB7AE047F8BE153B
+:10A2B000F8B12542FE47EF7F709EB81F90F2F61E60
+:10A2C000A777513ACAA1DD6F6DC650AB948F0D2FA1
+:10A2D0006F197E39BBCB8C95A15F33F06B24FD6089
+:10A2E0008CD65E444F3FEA09EBBAD8FE8FBBD26DE5
+:10A2F000DFCD3F3F302FE5AEF4D2817929E9A87355
+:10A30000106FBBAD01B48FA51F297A3E4B049F4946
+:10A310007CCAFD03C621B0FEFD82EF37897A8F88A3
+:10A3200067C4BE84F8C1A5F37D4879F671F4916CD9
+:10A33000F77DF9B5E438522F46D38D8CA3E07AAA85
+:10A34000C7C4AFD7B65FECCFA2E8F829C15F0B80D6
+:10A350003770DE6D86E017C48F77D819E513F8994A
+:10A360002715E371AF8DE07C34B26F38B6B766FA6B
+:10A37000BE44BA927E5D7C8F71AA5A11BFACDD6B70
+:10A3800008449E7FB93783D138BD76B35F0FFC9107
+:10A390009BE9DB87EDFD15CC1D443DF38F168A2B21
+:10A3A00081815B8AF2A691851211CEEF25FB5E209A
+:10A3B000FAD5F70C47BFE33925340EDF9F10FEDADC
+:10A3C00013C25FFB7ED77BCFBE02AD17BF726EF1AB
+:10A3D0008F91CE5EB4E4217D9CB0F4E7BF25A1DD72
+:10A3E0007D81B9922E770E699159EF5523FC67272D
+:10A3F000ECB1FD7F6F0B3C378A782B5319EDC3B757
+:10A400006770F9193EBFC4E3ADEFEBB4FE37F91C3A
+:10A4100093C1E1DF19E71C506106DFD7740EE1FC40
+:10A42000D8D7AE50BCAF66DDFA3FEB412ED4ACB509
+:10A4300007E9099FD18EAB71F8833A289F3070B934
+:10A44000047F73CD6561FD07F5D449C8337E07C528
+:10A45000BF960AFDB5ACE9CDBFA15FA14665E6494F
+:10A460004518C7F21E1E049F3EB52D4F44F1BFF2A2
+:10A470004777A6A37ECA58D426F2C1A63AD0FE5585
+:10A480003C37E82F592F676FA96427131D00DE1E84
+:10A49000CCF0F6221F2F4AE27EC145775A03FE0810
+:10A4A00079B857F06134FD7C10E7BCCD97191501E0
+:10A4B000EC6F61AAF76FD4EF9DE73472EDBC12FA2E
+:10A4C000C523485F77D8DD4FF0EEF222F363D20563
+:10A4D000FC6B310E04A2B1B7B067F8BA7CA4E3BE3E
+:10A4E000BCDFA15FABDBE4F0BBF0BB91BECB76F190
+:10A4F000E241F1E3402E23D247C34585E86169F785
+:10A500009BC751AE37A821A293A5661BE1B1E1A27A
+:10A51000CAE9A9D5703624DB03EED7A47AD232601B
+:10A520009EFE7B2725533C09F889C3172A459CE3E7
+:10A53000F832C3372803E0F79035F136DC7F5D3021
+:10A54000BB92308FADD108F4703575E73547D843ED
+:10A550002CC7AEA583EEB7FE86F35A6EF61951AF3F
+:10A56000AFF034D179B14549C152C79848BC4FD2F8
+:10A570005F1AFDF5F17E49C897F78D3C6F64209D09
+:10A58000733C6CCF10F5B239BFBC9FC76A9EC3E75E
+:10A59000287842BBF787887291280F17F5D279790E
+:10A5A0009AE097F7C7F17AD1E32C15E37C99E1990A
+:10A5B0008C7082764123D2C76B163A67C44A40FE3C
+:10A5C000A1BC5B934B762CC8B96908771827984CC7
+:10A5D000F54CA4675813C841C0676FA98BE0B3B5A9
+:10A5E0001CE805E341AF9A281E24F12BF11A8DCF08
+:10A5F0008519CA77CB4F1F18BF5E98513A307ECD70
+:10A60000D850C217D14B8CF31FF1F0F56B3BC70349
+:10A61000F0EBF20CD283C1B1917CB349C051CAB501
+:10A62000F713B478FD3C9DE3A15ED4BB84761FDABA
+:10A63000D1EE3EE2BFF75378FDB402AE97A45DFEC3
+:10A640004F022E5FA66B9F52CF44FBD1BF14F2E2A4
+:10A65000CB74EE4707BCDE8DF395FA09E44C301954
+:10A66000F878D1EB2692336C631FE5D540BDFF83AC
+:10A67000F05A64EABB3515F4CA0FC1DE311651BB7E
+:10A680004B284706ECEFC748BAB033D4DBAD190E00
+:10A690006E1F94F4F1B8D748BEAEA50CE48772657E
+:10A6A000FC630C210BE4F06B22BF42C1BCAE146210
+:10A6B0006717F60770FF978CD230DCA3C73B21E801
+:10A6C000E0D10C4525BC15B242C4DBADEF7E6E5F18
+:10A6D0000C5D9E13E765934DBE76ECE7ECDD6F9164
+:10A6E0009D7EC2181CDE668BF1DD187CEC2125FCFA
+:10A6F000FDB6A7F47EE3D5987F7EF6C19B61DD4B66
+:10A700007BF46E1C72E93D5FBC331EEDEC1E03C58D
+:10A710006B40DF6F5371DE4DDCAE3CA1D3D2C1671D
+:10A720007769F73DAF0B7A90E772A5DC91FA7C155B
+:10A730007373799390B81BCB1FDD713B9DCB5DCEBE
+:10A74000BC873D00F7D36B66925D7C3BF3515ECFD7
+:10A75000B256ED39DB156DDAF2ED3B079CC32539B6
+:10A76000BC2A10FD5EF8A52B63EBFBF3822E3F3372
+:10A770008AF8FD7A53CCF8FDEF85FC09C7D9FBB404
+:10A78000F1FB572F1FBF6F8C8ADF87ED88E8F83DFC
+:10A79000EFF713616F60BF9171FCCF2A62AFE3A343
+:10A7A0000C69B75835F9199F0CB05B12E97BE3458A
+:10A7B0004B9CF9D8E8FD672B638FD3D73F8E365F6C
+:10A7C00020DC9EE709C8FDB5A493C68B59A4676534
+:10A7D00059DAC7E17639F43DFABCBAF46F4BBEF8EA
+:10A7E0005861E62CF2476D1776BC9BF2333F46BBAF
+:10A7F00008F972BAEBB5104C71D98F270E578784C0
+:10A80000F9267A1D405F674211F2D898694F23FDFF
+:10A81000EB666E3A9727E8FED6BBABE87CCFFFBD70
+:10A82000A73223326E2AF7530D46698FD934FA9630
+:10A8300045E9E3655D6F911D06F6D770143E7F7A9A
+:10A84000F56ED2C32B99371DE9BDF7D511746EE5AE
+:10A85000DBEA61399F9BFC4B0C3CBF358DEC8739A3
+:10A86000623E3775733B5067F618681C0F7339D218
+:10A87000698BCDE70B425485F275FDF347E71D6305
+:10A8800093C4FC156C0FF0BD4E3CD9525F26CEDB55
+:10A8900084E3EA310D269089CF96896E173EA7286A
+:10A8A0005E95CF83E3791A6BCAC1FA3A7348CFD762
+:10A8B000093348C7F6FDF0A2B25D9437CEBD70EB08
+:10A8C0000A7C6FB3933C318A794CCF04B988FC6D14
+:10A8D00066665CB7C9163C4DF133F1F457B8888F02
+:10A8E000FD4318F9411258079D3FB5D9CEF971B112
+:10A8F0000EE650B06C715C08E27EE29CC3E6C7F3E2
+:10A90000C4202F6765A23F5FF9D54AC40BC867EE24
+:10A91000178AF75D0DF2F31142DEA588F9B50879C3
+:10A9200097C5DC8AB8C780E4DDFDF69537E07E2662
+:10A930008D79F7A3BC7B387106C5FD32988FE693FD
+:10A940003A43D5C82DA7575BCE98AF46CB3B05E71A
+:10A9500097E5D3BE37B3139497A404BD9997526972
+:10A960001F3612FD310621378E59783EC26631CF2F
+:10A970003B3353886E8E59785EC2B7B65BDCDA7DA6
+:10A980007D430A3FBF7F3EDD6CC6F1C08EB913E147
+:10A990000776CC077E16CEDF2C9CD24179029B6FC6
+:10A9A00054DC1BE0FD66BB6BBD0AA4EB9FA9707F66
+:10A9B0008FEA28C77C9CF63C871BF3441B45BEF7F7
+:10A9C000668BA3F619F2639A783DD6B719E396ED34
+:10A9D0005B1D0EAC9756D937CD88FBAA15CCB19B21
+:10A9E000C5A0F7AF808F60BE3FC732E04911F46366
+:10A9F0003DE2BA85D620BEEFC17F17F0F29432DC7B
+:10AA0000BFF2BF82EE423A77C93C7AD2978DDD859C
+:10AA10006FD860BC82B985E4AFF756F2B82F1372D5
+:10AA200060BC1C57F0D9B561BAA7EF85A23CB45BF6
+:10AA3000F87FD34C3CAEEB8021CAC49143AC9FC697
+:10AA4000F9C1CDE41FE7D36B58F80FFBAB0CF74F00
+:10AA500072696AF87398EF60A822B3BBA50EEA8DFD
+:10AA60005783FB91AFAF15CF42F13C547E23E9E50C
+:10AA70001E9DCD65D4713E3717A0ABC3AB47B894CC
+:10AA800039B6B4603FD729417AE6CDD8DE82D39F6C
+:10AA900023FC4CC999C6009E376B99007826BFC825
+:10AAA0009F0FA3FF5AFF2FAC18F174CC20F59E27FF
+:10AAB00089E7FFB9683DD50E3E5997CE337B2EC24C
+:10AAC000F9283FCFC6D0748BF8FE97A9554997D780
+:10AAD000BB3C0F30254BCFE5E30C1E876D9C6FA66A
+:10AAE000BCE546710F03537DF93F8CF0AFC8B8C584
+:10AAF000BB06367F5F8CFD464A16B707E6DCC0FD15
+:10AB0000C28D221F477E4FCCE27EB2BF644E7B37A0
+:10AB100093EC3D1E6FFD9D945F23D948945F11F225
+:10AB2000E58F245FCADF8E277FB4DF85FC99E72994
+:10AB300036D0BE40C82129EFBD22EF6801F31810BE
+:10AB40004F3DE21E95A3E5AB480EDDCC7CF4FEF74D
+:10AB5000153CFF0008D380FDDD34436B3FCDF36A25
+:10AB6000CB37CF8FB6AF383EE4B80B7CDAEF73A4A7
+:10AB70009D3C436B272FFA87AF9249CF67FCA2FE1B
+:10AB8000D2E0703E5163543E5183C8276AEC2A3CA0
+:10AB90009416914FD4D8CDF3891ABAAE944FC4ED20
+:10ABA00029AF29B01FE324DE5AD294EC0D917F72B5
+:10ABB00010F34F8AC2746EAFB0F33C0CE6A1BCA296
+:10ABC0001C8795CE5DB4EA8AC88FDB9A68D7F8DD1A
+:10ABD000B7AE7755613DE9BF95F9434837B1F6C344
+:10ABE000D9597C5FB343E17E74FF0233ED3B9D0591
+:10ABF0005E4D5CC1A967C7D1AFF86EA64BD6273FA3
+:10AC0000C90E832FAB189E0185D17989FEF67AB6DD
+:10AC100091FC905172CA99EAA6388033692CF9F5F3
+:10AC2000E77517923F92D92CEE614AB8FF7973DB32
+:10AC300055CCEB69EC6E5797DBC27437364BEC435F
+:10AC4000ACCC8AF4DAEFD77BCE447EBD6493B730C8
+:10AC50000BDAD71983E4BF8BA0577A1F4F5FDE2E24
+:10AC6000E8C550E15DB002E6D7FB8ED18DFB6B0AE3
+:10AC7000CC41FFCFBF944C7E49750E233DB5B19CAE
+:10AC8000CB935EF493C13A3E4DE6F7FA6CAC66A402
+:10AC90005FCFA74C233A5EC502873DE847DB0574CA
+:10ACA0001879CFD21E6DB98E7590FEA97B66003DD6
+:10ACB000937C94F2B89EB9F4068C1B746ADBB3A142
+:10ACC0005A395C28F447F1BCA92D98FF50ACE3F247
+:10ACD000912D770F9A43FBF5458E4F2C28727FA15B
+:10ACE0005CCEAEEBB59FD273FEE77AA154F41FADF4
+:10ACF000BF4A853D3719E417EE6FA57D06F5A97C9F
+:10AD000050D7ADCFD485E75922DA49BB50EA0B8939
+:10AD1000AFF2098CE179B5BBB2847C1AC28620BE41
+:10AD2000A17FE21305375829D4BF1FF785D78AF1D1
+:10AD3000801EFCA8BFFD3A7300E96BB3D244FAD27F
+:10AD40008CF63F3CB72A3ED20BFF5EE3D7237D4C07
+:10AD5000644D37DD00F526997BAC28B7804EFE3177
+:10AD6000927E5A58306F9FA2A123FA7E36F9ED9851
+:10AD70007424F55AF0F7DC9E99C5BC74CF93E70FA5
+:10AD8000DCEE3AA8F07D26D89F07D1EE7A5B3793A8
+:10AD9000E864262C03EB5539B4F89F9EA92D47DFB4
+:10ADA0000FC5D05A284374487806549C4FF4BD51BF
+:10ADB0001E29F79856EEE5B3AF78DEF896C33F420A
+:10ADC000FF83751D1B89F60E58AAC48FD1F4B027D6
+:10ADD000EB7B8FB7ECC98A116FE9157EE56B58687C
+:10ADE000E533CA407A3B7F689D3E33822E257FBC87
+:10ADF0006CE07913CAEB3CAE35C1CCC604112E25EC
+:10AE0000DCFF28F9E31AA4D39430FD9589F787A4D1
+:10AE10007C19CC0623BD5DD76509EA013F85A2BF39
+:10AE20006B90FE8AC2F689DC77B44C184067F998BB
+:10AE3000170EF64C01D295B44F8A958E163CE7FD5D
+:10AE4000FC4BF7B6E07C23E8EA2D84C35905E88A79
+:10AE5000FC6A03F4ADF67B14DD49FC4B7BBA9C35F0
+:10AE6000D17E676E02D7B3C1EADB49CF82B824BA7C
+:10AE70007B730EA7BB2AE621BA2B675A7AA9346BDB
+:10AE8000CBD1740923EAB474E723BA8BA6D77874BC
+:10AE90003718E94EEADBD42BD3DDE74877DFC58FDF
+:10AEA0003990EE3ECF72C6A7BB687A93F26C9FC50D
+:10AEB00051897675638D42FAA1F89DA12D581E51D6
+:10AEC0009F4F76F6BE6437D9DD8D4DFC7B498F47A9
+:10AED0008F7933056BC5F77C6F25961BD7C177E853
+:10AEE000BAF418CFAB197A0FFF5EB8A1E90DBCBF59
+:10AEF000A0D1CFDBBF7C7A339D870A6C16EDCBDB0C
+:10AF00002AB1DCD8CADB7F8A71AEAB31BF2DD082CB
+:10AF1000EFAFDA96EFE6DB6F6ED74F11EBDDA73CB4
+:10AF2000F706B56BE3ED6E3F6C4E60E427E0F6FA92
+:10AF300064B1CE29BBF83AD33EBE7E860BE86345AA
+:10AF40009F9FECB94F74756524EFE2ECB3CB95B6D7
+:10AF50001C7C4E4739A647BCBB5BF543781C743755
+:10AF60000C717536F7D3C8F821E6295447D817571E
+:10AF700067733B44D64B4F61747E8DFDCC4EFE72A1
+:10AF800019DF0C3EC414D407B8466197C48C774EC1
+:10AF90002F6822BB62FA6019E70CA94B61DCC24B37
+:10AFA0009F4F8BE5472ACBE6F6F329917721DFD730
+:10AFB00004F2754817FB9048E8FCF09077D09EDBD0
+:10AFC00097CC34E7DCF6E5F3F2D4ECBC7F6ECD0130
+:10AFD000F8EA9A54BCF78BE52994B7F2831E164C15
+:10AFE0004A1C38FFE92A0B1A290F8ACF7F658B513B
+:10AFF000DC57C2E5DA3C813F366918D1EF5C81A7A6
+:10B00000EA6CA1178B5931CAA979026F3F343719FD
+:10B01000B8BE6E3344C98F79D9283F1E8E6BCF6B73
+:10B02000BF47C9971A31EE4A61C7AF627DE43FFD61
+:10B0300044D8F1A71EE676FC6AD641FED3DE9F71A6
+:10B040003BBE1E9687F412ED07ADDDAB2DD77768BA
+:10B05000CB0DA0DEB1FFC6AE28B93386FBA57B1FA2
+:10B06000AE2F433F64CDCE77C8FF5D23E54C402B28
+:10B0700067C040E772E6A151E4BFFAD6F2E319D8FF
+:10B08000D59569F24BEFC97646F8775EE4792E0DD7
+:10B090008CFB117AED236FC17D2C8BD24FD172A521
+:10B0A00050C815E9FF90F25BCA9B42C6F514EC77D5
+:10B0B000DFF1609B283BEFE16CA1AFC4FE4DFA4D80
+:10B0C000A47D5488F611D2D7A82622BAB07E72BFCA
+:10B0D0006DD247E8A5052566C47B9119F81BE1A64A
+:10B0E000B78DF5D934F4F168F6E5F783DAEF51F46A
+:10B0F00023F7630B05FDDC84911818FF0F721FB84E
+:10B100008AD3CF5CE63D84F4F3FBD59C7EE4BEF0AD
+:10B110009BEF033DFAC87DA0DC4F7EDDFD603FDD87
+:10B1200058C03E86E7B15CE917E0F1FD4685D3459E
+:10B13000FD9CDF3D56C5C2F2E2683373AB8670B941
+:10B1400065A6C98C7E971603DF2FCD99F57ED9D2DF
+:10B1500008F913B4971F40B8B16E27F977EBADDA51
+:10B1600071362B3D77FD11F7558F5AC9AF74E10841
+:10B170002393E5C2AE11940FFE9981C75BE57C6E07
+:10B180003FBCF7B510D45BB9EE9662CC2FA8550240
+:10B190002FD6C1B70FACBE7791BF6B7541712F67CA
+:10B1A0000FC527E4B8F1FDBA7E92C7C6035C3FF72E
+:10B1B000290994DF0BEF8747C6E9FE3888CBEFDC1F
+:10B1C0004CDF07B81EA9475BFAF327F813B4301B0E
+:10B1D0009412CEA708E74D707FCB5F98E78A79136A
+:10B1E0001B23E204D03E66BEDB7921CF47617201AA
+:10B1F000CC6765BAA717D77F4AC4854F8938E2A9BB
+:10B20000441E57FC7B7F7DFEB40DE27AE894883BB8
+:10B210009E4AD1C69B64BD44F13CD96CF66E346045
+:10B22000BC9E793782FE703D646AA27C95451C5FA6
+:10B23000BD2F256BEE11C81A543E6A10B4FB99D38A
+:10B24000AB1F04E32C6FD39E83EA15F7DBF60ABA33
+:10B25000E9B5F0A71C376B50F5286CD7BB80DFB37E
+:10B26000DA5F9E28CB5EEABFF7BA10C9A3FEF28F61
+:10B2700042E29C3AF793C8F840BCF86174BC30FADB
+:10B280009C6974BC7FB1E43711EF5F24E4D4E26EB3
+:10B290001E6FB8D5CC360F82EFB7756750FCB82655
+:10B2A000D13F5C13EFF75BBF519E87A4CFDEDC9EDE
+:10B2B000FEF8F8CF22E2E3F5223E5A2FD7D7A95D58
+:10B2C000DF6401CFEF313E3E799073607C3C3A9F62
+:10B2D000E245B4330C613CAC7170B855E9EB2AD14E
+:10B2E0004F7C6139A33CF7356F2D6B413FF29A2DAE
+:10B2F000E296556177D70B38C75B97D3AB632E8D3A
+:10B30000BF3E81B922D693E54BD194C9928FC83301
+:10B310001D5493AD699FDB3444537FF0BA519AEFCB
+:10B32000F9FE224DB9A0F51A4DFD616D159AF2880E
+:10B330009DD76BEA17B22149E46F3BA2475F12BB6E
+:10B340002A3047F37DF4DE859AF69FB2A61D93A0BE
+:10B350005EA7457B2F33F37B7AC69485F3A9C77626
+:10B360002CD5F4C3824A50290BDF33F699B8A7795C
+:10B37000790F8F875CDDB55A334EADBE8EF0181D48
+:10B38000EF2D627DE4376E0828EE201B18FF5DD597
+:10B39000D54EEDAE64F7C878C8C64122DE97CDB26F
+:10B3A000395D47D3858DECC30BBBF4E47F2C64C3BC
+:10B3B0001F9A44F032B0806B20FE2E30EE17BBF0A7
+:10B3C0008CDD8D7945B7BFB58CE663CAD4D205DE76
+:10B3D0001F18B95EEB482D5DD8DD5A3A489AA0A5F2
+:10B3E000836878277BB474C142F0BFCBC03B7586BD
+:10B3F000966EFEB7E0DC81F0B586E15B7CD0D3626F
+:10B4000023B8F1BC35699F99843D141DD790764EC1
+:10B410007090B0BB453F322EB159F1935DD51F7787
+:10B420009C10CC0BE6A33DD5C4B85FC97B10E56F7B
+:10B430000CBF24BD8FE79794709D9BC0F5672DF3DB
+:10B4400092FC3E66E1FEA493D5ABC89FB4923591C1
+:10B45000DDFDD99CE9C2EFE8A77A57CA5318909F3F
+:10B4600000F6298BF0D7AE068B1AEF1F8A86A7D27B
+:10B47000AD04ED786E98754B7DE0A3FC150FDEED05
+:10B48000A989FF68ED5FE65122E597B487E5781258
+:10B490009E52AEC9714CAC499F897C1125E7D8C832
+:10B4A000E8F893D69F23FD41328E23E34CD1FE9BD7
+:10B4B00008BBB8558F71D2C1F92D78CEB7D8E1212C
+:10B4C0003F6129EBB905DF4F3077B4A82EE1BFB853
+:10B4D0008AF5FB2FE2EAAB2BC4B56FF22BA147F242
+:10B4E00007C6B3657C1C96FFF11FA1F124C5958B9F
+:10B4F000F398F3F20827D2D340BFA6FBF82BD08FE6
+:10B500005ED7978AF5AA30313D22DEFDA612A2F55C
+:10B51000FC907936459EDB6F601DD36E217F32E84B
+:10B5200049BC27A793FBBB5857B43DAC92BF590702
+:10B530002B41BAAF651171DEFCF0772AEB079665F7
+:10B540001ED295EC89A7F18272CAA3E0F9534CC8C8
+:10B5500041B9FF8CB7CF93F918F27E4F9977549485
+:10B5600023F8751C1B87FD03BF95E594A27F01F8A6
+:10B570005389E4C7FE3C25FA3E801FA3D62FF33142
+:10B58000F4F612F21B2D8B5CEFD78087B45B7E9CA8
+:10B59000C3E8E9C871D1B33EE1C46F3DF8B9A4472F
+:10B5A000933FDA68840D0DFA135E1479811D5ABB3E
+:10B5B000FD961C9D801BDFF75C095EF1F121F2F81E
+:10B5C000043EBEAE1D26F3F8241C970C84FB0A0D26
+:10B5D0005CFBF78FFD705F110BEE122EE74A7B7E4E
+:10B5E00081F8D2DB8FA523BC17A67A5763FDDCE375
+:10B5F000A14F145D785E55FAB394877BA14B4FE75A
+:10B60000FF1AAEE372B0E1253D8986F3DD268AB3E9
+:10B61000D674BD4176E1D96610B406FCBD0C187233
+:10B62000D865FC0851F08EB74F92EBD99023F6E520
+:10B6300062FD32EF07D6B93927665E473F1CB4DF9B
+:10B64000051CAAF46392F01C597FBE92DA97177911
+:10B650005F5FF43A2A7278FEDB29B3F73EECEFC362
+:10B660009E9C1DD85F95BEFB7036C267AD42E7BB9E
+:10B67000A698F879DC2C715E6F42A8C98DE79933E2
+:10B6800073F87D66237EA4F7621CF9FDB577A6E00A
+:10B690003934D9FF084547E747197BEE837F2CC132
+:10B6A000F8E62237DE6FBFD824EE2FBACB1A2C0073
+:10B6B00039F2BA91DF476518D244E766FA92F5E4A9
+:10B6C000D74CD3B3A9487772DEF2BCAD7C8FF701BB
+:10B6D000605EB17C3FA5A5AF780DFA7B043DC875CF
+:10B6E0004FA9EC2B6EB285E12FF33CA3E15325F873
+:10B6F00043EE431BF05E5BD0BFE7CDBC1C7DAF6D5E
+:10B70000FFFE7458FF3D36F6C8B87E83C593341EDD
+:10B71000F951DC6BFB17872789DF77A4BDA7F6BC3F
+:10B72000C8B797BF5312EFDE9BFFCC51BE977B8209
+:10B73000E2E585CBBCFF7870694856997A359D73F0
+:10B74000F75EAEDE2BFFAD8FB9DFBE28BEF7DFD3CD
+:10B75000F96AECBCC55EB1CE707E6188CE29F7E790
+:10B760002DBE547ED97B471AF03ED20838C8BCF6AD
+:10B7700006BC8FB43846BFD09FCB76E57B87AAC482
+:10B78000BC1A308F3035F23DA7B7F03869222F3020
+:10B7900094887CFBCB2E3D9DE3FFE511DD8CDD31F4
+:10B7A000E69D9BCBE132CAA9121F8D0EF2FBB5E3D9
+:10B7B000D593E779E4B9D8E8F97556846EC5F9638D
+:10B7C0009E72ACF11CB97C3F2BE7DD99C2F1D1F040
+:10B7D0009A89DF9BAAF27CF2CE94D04AE2138716B4
+:10B7E000CFC3041E3BAF0FE5D1B9B299DCEF108F88
+:10B7F0001E26A7FACA51BEC87BEECAD426C511C1FF
+:10B800008F57A28730DCF51ABC0E84BB91BECB7E6D
+:10B810004F1F157CCB3C36DCCF2D11FA6EC99E5ADA
+:10B82000B287E57EE9F44E3DE56F9C663CAE72BAA8
+:10B830004DA1FDD0521F63EB402EAD7CA27833AA00
+:10B84000AE2599B09614FE1E7F1F66E9C6A8F8BA09
+:10B85000D85F49BD2AC75FBE4D6B17D7B06D7F4615
+:10B86000FBE9F4512E3F56B026D23F2B1FD0F6579E
+:10B87000B367D6A738CFE8BC8011C28F372D57ECFD
+:10B8800057CA5819EA8F354F7C6EC49F6089C71715
+:10B89000F8FB4F4387F1DF7DC227FE8E083E6FC95C
+:10B8A000F5FC2017FD3EEFF2F9AECEF5CDC9457F90
+:10B8B000C9BB7C7E17EA2E703DB32B8DF45B8BFDEC
+:10B8C0002E92FFFAC15CFEDF8BF735009C4C26718F
+:10B8D0006FBAAE499F48F64D80E8EC43E71D737E92
+:10B8E00040657726F243DAD3D36760BFCEA7AD1E9B
+:10B8F0005CDFD6724F21FA2FB656F3F3A166138F91
+:10B90000DF077E39F100865386766CAF40179DA322
+:10B910007B7F10FD42ADBA3F1FC6BC98D6C93C5FC5
+:10B92000325D17DA3F28623CA7359089F17DE768E0
+:10B930007E6F4E9ABEBC90CB7F6E2736085C5CE86B
+:10B940002A207F62AF41FA173B2C742EAB8EFF2E5C
+:10B95000C628C6F12FF3EA700E9176F1D966A6F9E2
+:10B960009D86511D4AD09048F7A8503CA86E4330A0
+:10B97000FD16D4674FA9144F93F34B7B3DAB02E305
+:10B9800066528FDDA238B8BF4DD8FD0B98FCE3712D
+:10B99000B7F9829E16087BFF162B87F752E6CEC3B7
+:10B9A000760BCD2C5107AC764B654729ADB3D690BD
+:10B9B0008C76858C1FC5B74762FBC91A7E61E7E7A5
+:10B9C0009E95BEE1D8C919F4415D863FDB853C698F
+:10B9D00018CECFFFB1A1CC83F1CA86D746D0EF30C5
+:10B9E0009912783C1CE49619EF113A84FA1ED6BDE0
+:10B9F000EA158BC85B0A8873CDFCDED8C639394599
+:10BA0000741EF1781FDDFF71DE10CA23FE067984F3
+:10BA100037A6BE92FBBB1FE0BDEB0DD960D741F945
+:10BA200074EE9F7879486825DE1B9992778997474D
+:10BA3000853EC1724E5EC26C2A178556EAA13C3E15
+:10BA40002F939771030A0436356FF06C3FDA2DC9D6
+:10BA5000C22E7087E8BC77C3CB237491FE58771E43
+:10BA6000976767843FF94C3EBB6D0EC27B64ECFA6E
+:10BA70006979D2DE6EA3F5C9F5CAF62C3376BBFF21
+:10BA800010727E9538A73DC5CA5A2D3CFEE74F047B
+:10BA90003C1CEC1E41F1CB7FCD4DE1FD3B42744F90
+:10BAA0008FEC27FA771CE4B8AB15FE7B59E7A3F2BD
+:10BAB000BC7E97CBE52B8CB391C619EAE1E79BE7F7
+:10BAC000E41422FE006FAAC09BCAF7C9ED7C7ED0A9
+:10BAD0002FFEFE13E88762F4FB1FFC0AEAE787E704
+:10BAE0001D4D2727C538AB5A78DCB62FB980E869D9
+:10BAF0008A55DCF752A25DC7F83C6E9FBAF392C537
+:10BB0000791D09AF0C85C6691170CC090D9F33F6FC
+:10BB10009BAFFBAFFF4BEB8EC09707EF6D39D8C5DE
+:10BB2000EF371E9FC7F185F49C4276E0764D7F6724
+:10BB3000D647B59FC0285FAE21A580DADF2BEE6F18
+:10BB400095F7D961BBFC71DCBE45BB57DEA7C1FCD4
+:10BB50009359641CB2FFDE8C0E71BF70FF3A6F28E0
+:10BB600011EB7488753A22EF33ECE7CF637D79737C
+:10BB7000ED03E9B81FFEFDFD8D2912FD69F83C5665
+:10BB80007FC8D7F1F072551E9727DF1B5EE43CA3F8
+:10BB9000E0D90FE7A8F94978227F53BB315ABA940C
+:10BBA000F3CC11F43980BFF3BFE578E27ED9FABB5C
+:10BBB00079BE387369E9BABE335F87F909B2DD0728
+:10BBC00078C0A034EC27BC214FEC2773584E9CBCA6
+:10BBD000476F9E33A67F91DE47EF277B93E5EFD932
+:10BBE00069FD1ABD4EFE7B39FE73FC7E836BA3FCA0
+:10BBF0003C188F7ACE166E17D62FDAF263027E03C8
+:10BC0000FD547D7938BF1253C5F3F83B5BABF34A63
+:10BC100067AB6077942455DC990FE5A6C7C693FC03
+:10BC20002E1954F1793EC8F3358F4DE0DF47577C2C
+:10BC30003E04CB791379798AE77994F760B4CC9E86
+:10BC40009A15B62BEECC73D1B8FA4A1DDD6B67425C
+:10BC50002306D6637ADD44F98012AEF19E25265D77
+:10BC600053ACF3BFF7F4D3038FBF4CC07FBAD01FE0
+:10BC700028FC052155E32FE84DE4E7CF7B5FFD92DB
+:10BC8000CED7DC9BE75B9F07ED1BAD676FCD87F2DF
+:10BC900006EB0714EF533C6087A01FC6E5608B607E
+:10BCA000BECAD9AD5EB49FD86AB75925B80AFF1885
+:10BCB000DEA907F07BE5B5A77E3C880FE3C5794C8C
+:10BCC0001472A0F1B5BFFD15E3C48D676C6E341B13
+:10BCD00027763F7C27DA5F13BBDFFE1BD7C3FC3C14
+:10BCE000909CF744F47FC2FB095D269AFFC4EEAB3B
+:10BCF0005660FD6BDFEB2E403AB9EE44B005C5420D
+:10BD0000EFABFF3E48730E887D7AD97CD1B8F1390C
+:10BD1000098F3F01A093081E3FE7F0F88AF2D9CEC1
+:10BD20003B8F6E0E9193547BDE0AEC788A3B5F600A
+:10BD3000096E8C7BC873FDD17ED5E3D5B03E787F8C
+:10BD40005D1FCC20C29E9E72D10C82245C2E67C9DE
+:10BD50009A72A5394B53BFCA91AFF93E3DF32ACD34
+:10BD6000F799AE424D79D6C8899AFA37BACB35E5FC
+:10BD7000D913666AEA577BAA35E5C26087A67EF1C9
+:10BD8000912EEDF7634C8F78283AEE7E039FA5271E
+:10BD90003DE49E2D3BD5F4063E27FE858323DAAF96
+:10BDA0007CCDC58E37F0BDF42B479F9F927EE69BDE
+:10BDB000F5B68031B63F39532D08DF83A0D7F1F3B4
+:10BDC00053EF25FBFE807893E7A7A6A05F1990505C
+:10BDD00075DBB99FE2EF325C58C4FD6EC711319438
+:10BDE0004F6E277FE57143D3B37FE47903B928F71A
+:10BDF000AEEB9BAF59F7948B3ECDBACBD9AA283C7A
+:10BE0000DDA1295739EED6D49F9EB95EF37DA66B8E
+:10BE10004B149EB66BCA37BA1F8EC2537B149E9EBC
+:10BE2000D27C97F4DD2DFC5FAFA1DF0A9E93423DEB
+:10BE3000958887C9A7FA081F137ADA2A114FD71CE9
+:10BE4000EF207C9504BD95282ECB8E34BD81CF206C
+:10BE5000ECCBB0DD81E64C7A1E6C7691FFEB70F393
+:10BE6000487A1E6976D3FBFF689E40CF5F357BE83A
+:10BE7000F99FCD33E8D9D3ECA567477307D57FAEDB
+:10BE8000B98BFBCF52FBEFDDC845BFC1795DA8017F
+:10BE900023C68EC15B499E9E4F089DC7F2067FEB6D
+:10BEA000ECA92034F0671D902F7F209E452E4FFB7C
+:10BEB00060780E1ECCF8FD19227FA343E729443B8E
+:10BEC0007CF4E30FDEA7E632B669BD37137F3A187C
+:10BED000CB662813B2E9F7901EBCCF93C3D8B3A8A2
+:10BEE0004AE8BEF7076763B957FC9EE7E0C71F241F
+:10BEF0003BFC5BC7D93D03E2ECA307C788B33F7B9C
+:10BF0000CA65477FCFD1AF46D8111E4785DFCBC367
+:10BF10000A0DF83B1CE56AA101F5ECF138E7215464
+:10BF20005379C9E0525CB77B1EE5915F6FA0DFE1FA
+:10BF30009BA3F0FDAFAC97ECE2FAA0F74613EDA798
+:10BF40008EE93C2B903F7A95BEC710CE373DFE144C
+:10BF5000E9A95E7B5F1EC2AFFAF1BDBCECEC7B4C85
+:10BF60007147940D1C3E958F3F39DB6FFB5EE133CB
+:10BF70001BD7110D9FB9831D7C5F11F4E4A21D2016
+:10BF8000CBC7AA3DF514572CF70CC3751CF59A388E
+:10BF9000FF7AED8161E437F294CE8BF0FFF40C363A
+:10BFA000D0FAE7A2DE443FE8427D20D6EF159E1F7F
+:10BFB000CCED3DA213DC672EB0D2BEE0988EDFA39D
+:10BFC000105DDFEEE2FBA3CFE2DC879C28BE57DCEE
+:10BFD00054FFEC0BD05FEF5A0B75DDEB1D41F658AB
+:10BFE0006F13401768BAF754D339FEDDE41620A169
+:10BFF00038EF2DF82FF8FE6CF79D5FFC06EA7FB056
+:10C00000D6EA261DE21845F05B282A2F4E3593FD0F
+:10C01000B4784E6E05EAC55B44BCF056BB9A4E61DF
+:10C020004335D9E8807E96DB0A370304D9CAB46A5F
+:10C0300023FE64534DCE1D9BF1B97AE87623F25866
+:10C04000DD987D9BD18CAD07162E25F9177AA7199F
+:10C05000E675DB3ABD8BEFE7E4F9DADA6F94F722A5
+:10C06000E9F798C84F0220D07E35C9A568F649493E
+:10C07000824E1F182CE23163D9D84BDA78D74EE4C0
+:10C08000A3B38BDF191E271EA1FD2EECC7DF8A7B11
+:10C090009EA3EF4F91E33A5C7CFF75CC089489F640
+:10C0A000E442AE07C6CDFF7C4329AC7F5CB7434773
+:10C0B000790DB7D5BF8078B8D025F068605DC84FDE
+:10C0C00037F9977CF01B424C9AE6DCF095F4A5BB5F
+:10C0D000C75119A92F4B42DECA487D39A1AFAD1215
+:10C0E000F5A2D48FC1E61A218F9B488E1E6C5E4745
+:10C0F000E5C3CD7E7A1E696E15F2B88DBEFFAA79B2
+:10C10000A790C701218FF7D2FBEEE6F9F47CADD9F9
+:10C1100047CF85A9BED7116E328E3BD7ECA3BCDCCE
+:10C12000430F9B18C6F12E749B288F0338E2B1474A
+:10C13000D2304FC944E744A3F395A2E57C3F3D7458
+:10C140000EB8B7E56DE4F7FE3C23B41707C7A7A701
+:10C15000A3CC6547B9F4F1E0F324878EBA5C76B4DA
+:10C16000A74F3E2ECA1E97DD00E53F0DEE25FD715F
+:10C17000D4E7B29BA0FCC9E3BDFCBBDF65B740F9C7
+:10C18000D3C17DFC7B8051D0FFECE02F488E9533EE
+:10C19000E520F247A5397F2AA80BD0D7E507912FD4
+:10C1A000A6672E998A7CB160B08BE872A66BFD41C0
+:10C1B0002CCF1AD9AEE215151E5BE1466C5791568D
+:10C1C000AD62BBA939776CC476D3866E5723DBCDBD
+:10C1D00018B36F23966F70B7AB689F2E4039561A0D
+:10C1E000EE4796E57729A7653EDDD5DD5ED207E30C
+:10C1F000BABCA40F245C2AE6566F42FF676397E23D
+:10C20000C0DFA5A998ABF4273360EE6203DE930A82
+:10C21000F2FAFF3DAE77AC87753662F91A2AB7ADF0
+:10C22000FF06FAED7F00F6E231E800800000000032
+:10C230001F8B08000000000000FFD53C097854E582
+:10C24000B5E7CE9D2D64924C360842E2649924965F
+:10C250002C43B6261064480CEE3001F944651910E1
+:10C26000C2164804EB17AB7E191A17E0698D6BD123
+:10C27000AA6FC4B5AFB6E461D458091DAA52D287DB
+:10C280003A5510B47974A488F0999011DC78D2C72B
+:10C290003BE7FCF766E6CE248014FDBE078693FFDD
+:10C2A000FEFBD9CFF9FF5F008053F8B3027F603403
+:10C2B000FE38253D8C046804F167BFD16DB295034B
+:10C2C000AC34078CA0A32F41A3AB1060AF0E9676C1
+:10C2D0001400A424C3FC7A0B968DB0740B96E75D12
+:10C2E0006803480568DABA206E8185DABBE36660C8
+:10C2F000FB4517E2AF38CE52056E54E0930AD49B4B
+:10C300009C89344F9A4DD21FCAC76F8550784A0610
+:10C31000E8B79A3DBA048044937BAC0DC7ED9BFB14
+:10C320004E835887AF88D6316CBD1EEBE300326C6C
+:10C33000561E1FCA8219545E09ED46C846B8F5CF8D
+:10C34000FBA422DA97C52723844E435F205FECF9D4
+:10C350005416FE63063D54E07AE9036E6999D7707E
+:10C36000206056EAF1673974EC706622DE5ED47E96
+:10C370006F04BF18BF43FB7D15E28DBE377569BFE3
+:10C3800003545B0F8D433002CBB8DFD912FE5E85BC
+:10C39000FF0D8F874967C0C3A4A1F010B51FF01A25
+:10C3A000418EDED70ACB6EA673E4BEC09DCAFCD117
+:10C3B000088121F7A7F245F4FEDA05FEF502FF2514
+:10C3C00036E7745A5FDDFC389053008E6D35794D39
+:10C3D00099DCFFA93D2944179375832D9A3E5B5B39
+:10C3E0006783DE00B0ADD5CDD0D7BA14F476803FE8
+:10C3F000B53673F9ADD6162EEF68F530DCD9BA8EA6
+:10C40000E15F5ADBB97E57EB462EBFDBEA65E86F8A
+:10C410007D91BF5F3B7F6586DB124DFFD5C9CE4561
+:10C42000C48F9E7BAA13993EB8F753C8AB9E1AC817
+:10C430006FB644C30183659D94C0658F11F7E1D940
+:10C4400016E36DC37DFD738CBB89C619A8097EAD4B
+:10C45000437C434A80F1D030D2BD9ABE4B461C3A51
+:10C460008966F5E412FE0EEB3CBF0764D9569BD3F8
+:10C47000A5473E381A8F551700DC82650FCEF3783A
+:10C48000AAAB85FA417EC048E39CA23F93717C0928
+:10C490006677F03A10A21C0EC408E8B1492C8FD17F
+:10C4A00050C8DD40BA9FF960E0E91319B68233CB7A
+:10C4B000C570F8A893AB039E32A46765ACC384D55E
+:10C4C0007D12F8A412845346D6008ED3976ED413EF
+:10C4D0009C14445650C7C39FC9DF226386F1CB1416
+:10C4E00048D4946BCDA335EDEBAC999AFABEF45CCD
+:10C4F0001EFFD2B48B34EDFA46579AC5BC532F2396
+:10C50000D865746F5C80740956991C9BB0FEBD9809
+:10C51000F822280698161BBF89E07B31195E6A371E
+:10C52000EDC0C914C07D4E937D238B105597DBC69B
+:10C530006BC7ED995363C37657E65769D721C12579
+:10C54000B4DFAB1D5334DFA7575EAEE9EF32FB9388
+:10C5500008ADF5CE7ACDF7C696AF419F0C30B1E568
+:10C5600024E84B01C6FB3A34E394EEECD2B41FBF8F
+:10C570001B6412EB927D8E3709961F74CAC42A156C
+:10C58000879BDF2458F5A53F83F6014EB059519F94
+:10C590004B8ADC8347023D962729E5CAA0B72D8147
+:10C5A000E87012F2F548BF8930C2216363A9F2BF77
+:10C5B0004E101F4C5220003207F6AB164B80793AD2
+:10C5C0008BD798456A05E51BF5C106C991A6473882
+:10C5D000470E5450F928048A08CA3A979EF86B2AE5
+:10C5E000348FA5B209DC69043F4874BF4F7CDC2F4F
+:10C5F00005DAC4E282C9C4CF753FFF68DE6DAC17AF
+:10C60000621C265CDFEFBAFE914A6BFDBB3FF591E1
+:10C61000376C217E6FB27ECD7852CB8D2DC7197FBE
+:10C620006AB96F2DCC77E192DB0D689F1036FEAFB3
+:10C63000CC760AEDDA3AA25323FCC9B8BA20D41E4C
+:10C640003ABE18C47731EABF7A5AD304C2D7DF5D45
+:10C650004E6C576F1072089E45F54E1CA73E46293A
+:10C66000834FD4A72AEDA1B29ECBE96A7D95686F6E
+:10C6700057C77B58B41FAD9695F12E52CBCDA29CD7
+:10C68000A9CEF7A02817AAE5FF7071394EB43F6113
+:10C690009B55EF2908E9FF53AADD180FE3C96EA0E7
+:10C6A0003D9033C91E48BB1A981FA2ED85B65EB1F6
+:10C6B00017F37F237B8CC5448FCB63DF21B9EE90CA
+:10C6C00080E4BAF17683D38BF37F9ED451B4C61243
+:10C6D000C2DFE7B7087CBB6AE39C32B65FF96ADE6B
+:10C6E00026E223396EF7C885F8DD3A56C77AA74E99
+:10C6F000B63881E87BAFD0FB6AFF48D8D0F2868697
+:10C700009E51F5B2C4F3C16CFCC1F9FAEF1BF5F40C
+:10C7100006C2598E3F9770939929F4DC48D4AD95A1
+:10C72000F8F336EA5933D23D251B9C3A6C9FF21A36
+:10C73000EA67A2F141BFD0C7AFC5F824149C958F1A
+:10C74000BDC9F66FA18C528EF87B2DCF9D97897C49
+:10C750007A34CE9F4B7CDBD0B28DD7758DDDCAE3AA
+:10C76000833558108ECFE2CC28FC979E01FFA53F61
+:10C7700026FE718203A4CF752874B4BEE596B778FF
+:10C78000BFCB95EFAC5F3243EDB82C47978FC639DE
+:10C7900032081F0E854E0774B60A055F5713BEFA9E
+:10C7A00017FB7313B1ECF0F947BAD93EEC2A97881E
+:10C7B000EECD7140743F2AF98BF60E41FF8ED60EF6
+:10C7C000B6CB5B5ABB18BE8473D0BA557CDD108DD6
+:10C7D000DFF967C0EFFC1F13BFA3F401A303FBAD98
+:10C7E000DA073C4E85FF8011C2F44C2BF125E2277D
+:10C7F000A14BE2FA3AB92021A0A98F13FE528E7301
+:10C800003CF1E9CA19BBAA37482179981C0B1D31A4
+:10C8100049CCD70E85AF1DC4D72AFF223F96EA1117
+:10C82000CF6F9DC47E43E037C4BFC0F3A878BA3B46
+:10C830001AAF1B888EA7C1ABB6FE07C66B27FAC717
+:10C84000A43782AFC478376546E3F9770A5E557C32
+:10C850006F53E47F383C6F233CA79E7F3C6FCBB483
+:10C86000F1B891F81ECE3E45D2475DF710725A7E60
+:10C870002E723A2DDBAAF8DFE8771646D3FD6DA2BB
+:10C88000BB5943F79E33C853CF8F294F91788B8480
+:10C890008D12B83A2CD1DF3FCB1C56DF9D173C4E92
+:10C8A0000ACED6F86793BF756BFCB329186169FD92
+:10C8B000D89B34E53AEBAD9AF697A6ADD5D45F6E2A
+:10C8C0005BAFA9BF32FF014DF96AC763117EE6D3A2
+:10C8D0009AFA7AE76F34F5739BB76BEAE7B7F468B7
+:10C8E000EA1778FEAA29AB78DCDA0A1C2F6D6B35C3
+:10C8F0002BF1D3650CAB03FE5A12838B0F07D9DFE4
+:10C90000ACF4B7D7B24BB2AF83FDD1329FAB96C276
+:10C91000AA8A9DCD6F12F4B55A95782D8DE15BAD45
+:10C9200036D6EF3B5AF319EE6C7528F15A25C35DE4
+:10C93000AD4E254E73318CB40BAF66BBA764213D61
+:10C94000A6BDBC4407B880E97FF867C15E5ABC77D2
+:10C95000BC8EE2DC35CA5E8E577FB3FF36E4AFE3B0
+:10C96000CD2607957BB71F31D80AA3F965EEB732FC
+:10C9700038C3F86C6ECB5F0DE467CD450FBA630822
+:10C98000399D9AA5637E20F703502FCC368321056D
+:10C99000F5C1ECD992A30DF8BB079218FADC583F09
+:10C9A0004D0F3E1396EB2D7A9F299E97E632A33FBB
+:10C9B0003D4B2C134C7AF0503DA424739C7E0D7D8E
+:10C9C000B4A13C3865B818BFCF223F1CFB5D6FE9AE
+:10C9D0003090DDBD6EE72FFA6FC37AB8D353CEF136
+:10C9E0003D5C6225FD2D793ED69D1A37BCBC2035B5
+:10C9F000E150185F4F25194EA5F8D1E17752DC7A46
+:10CA000093C1F19C2DBADF05CA7EA7C912FB6FC185
+:10CA1000D74DDE4D52483E717F3B4DB8CF26E201E7
+:10CA2000DA67B3C19757447EF676F6B39B2AD716DA
+:10CA3000119D9A2E913E311585E29DA6962FD98F94
+:10CA40008FD4CF91F04CF190C36F65FEDBDFBA93CA
+:10CA5000F9458D8B7A5B7D5C2E0BB86AC3E3A339F5
+:10CA600093FF4DA6B8A7EA4B11FF4C3CE9DCFB5302
+:10CA7000DC77A0D5FF2FE517D4BC829A6788CC5B02
+:10CA8000A87A64DEAD75096EDCEF9A2C5106F3943A
+:10CA900074A6A35E4055DFDE9A156597EFC83ABDD0
+:10CAA0007ED6D6FFC0FAF96CF9BF314DD8D548BE55
+:10CAB000DF37E30503AD53E5EF48FE9F437D70FE8E
+:10CAC000394D92D7837A7AF69276C344E9DCF97DC0
+:10CAD000B9E5A0888B23EDC2F7B60736A69B5C2B81
+:10CAE000737C61926F72501E44A5434734DD3ACF88
+:10CAF00040B7CE1F936ED176F1E0BC73B38BA0F13B
+:10CB0000CFDFCB8AF2273EC83ABD1FA9ADFF81F720
+:10CB10006D1D6B63B87244EF3C5927EA457C620196
+:10CB20001DF2EF8057E6B87469667B3CC533501937
+:10CB30008C277DB7AC5B06F20F41EFD48F46FE5CCD
+:10CB4000A2F0671FF83E247E5C05F77E4109982518
+:10CB5000D54BAE223DB7F40943084FFCAF93F32702
+:10CB6000AB947ECB2D9D46DAEFF267B5EDD4711A0A
+:10CB70005F8AC81F575FFA19B0DDF073DE6F55A7E3
+:10CB8000B6DF77597129876259164B08EF67D2A72C
+:10CB900047C9AE1BC2CA275B39BF203FF3E0039EE3
+:10CBA000B121FAC46447F1715CF6E9F9585BFF23DF
+:10CBB000F3B11CF7AC91E8F97DF978BFDD9945EB4D
+:10CBC00056F5F3A0DE79C3C47A67A0DC26F2A43759
+:10CBD000FDAE2D9EF8E40438881D162AF9D2856A28
+:10CBE000BE749D365F3AB9CFC779B94907BD6D713B
+:10CBF00048F789BD1ECEDB55ED76B759B0FCD35D45
+:10CC00004E99FCA3F16FB9645AB7EADFA8FE4E480B
+:10CC10008FE5B0BEE3BC6BF6D9EB3BD52EAAF63060
+:10CC2000D20E5606DB6BC9FE4DF8B6E34D82E72BFC
+:10CC3000AF1E69F7DE8B137AE2A8C157BE97FC8C52
+:10CC4000D7631CCF41F4FAAFCB167EC64CCF02039C
+:10CC5000CB1F091FCADB0C456EAE4F765F974DF5B3
+:10CC60008ABDD0999D06B2A37572DF23D7125FF9F2
+:10CC700065CE1BDE7CC707BFFFB5EDCCF98526EB83
+:10CC800071F63F868B339A74E0A6F8A2A4D6564A72
+:10CC90007E0CC56D944754F38A91ED9FB0D7ACC814
+:10CCA000E63C57B5DF49EBD928D6331CBD9A5ABEAE
+:10CCB000D0E431879BBFA9BBDCBA304C3E5ECA16BC
+:10CCC000F12ED2DB7AC81CA2F7D9F2C5FFB7F865FE
+:10CCD0009A0C1E09ED6CA1E415FE2F083F780EF8A2
+:10CCE00019CE8320433758F97C6A2138182E021751
+:10CCF000C37CBBDB4B7C3360088E24BEEA7FF5BB74
+:10CD000002E29BFE8B27B657C1F93B5F8AF4FF0610
+:10CD1000C6DB78FE8157BEDB43FC397087E1ACF49B
+:10CD2000C6EA646727F151E479CBBB53643ED7016F
+:10CD3000FD7A968B7AABE80397A4721BEBD84CE68E
+:10CD40008B90DE1CF5B4AA371760BFC24F74ACD706
+:10CD50006099E4B563D3AE808E45AC7071A657A6DA
+:10CD600072A7A82F5C99E895B05C581523EA6F4A22
+:10CD7000F44226C5430196CBF900AC0F1780D08B47
+:10CD8000378293F78991419684FD176F3597703EEE
+:10CD9000160239A4FF8B288E1A224EB7E608792F87
+:10CDA000CE12FABEB8469B17F9305BC91BDB6B4A43
+:10CDB000721056E738F7121D8B93FC1B1E2AA37CBA
+:10CDC000900E36A17C7D56752B9F77AAFD1AED3506
+:10CDD000BD84BFCD1270BCE2E936799F13E78C2386
+:10CDE000C3CFCDF2EDB507A8DD115A7BF9F078C5B8
+:10CDF0007E1CF747CB9587D7574CB11BE7FBF14318
+:10CE000025CFCBE5FF79E6EBFA3B0BF84CC1437E2F
+:10CE100072A3DD7D9CD76F04B0D0FA9F14711440CB
+:10CE20007306E547973C65D2919FF1119A63C80359
+:10CE3000F81BC6DD04FF1BE367827FC7F899E02774
+:10CE4000183F13FC07C6CF04177F3B1E8322808D3B
+:10CE5000394E4B4E79E81C3072BD861C81CFC1F92A
+:10CE6000BB8D3C7F9DDDCDF81DA4F7EBE0A573994C
+:10CE7000CD89C10B924EC36F03DDDFF0F9E9707805
+:10CE800051CF2523EBBF53E85AD4A967FB5FD415D4
+:10CE9000886F086B77418E91EB0B5F39184FE31F5A
+:10CEA000B50EE2D729E196A7E944F982672D330848
+:10CEB000BF75766709ED1BE53C83F651D4F5C18358
+:10CEC00013CB787CAB64A375041FE5B821621F9176
+:10CED0007850F7B539D1BF81FA6F7E258B76827A8B
+:10CEE0000784DC101F4943ED772DF3CF7453B0CC8A
+:10CEF0008AEB9D7E4A6E1E0AFF75F6298CE77754F1
+:10CF00007E53CFC715FE52E976AEF21D391E906BE7
+:10CF1000847EE76AD2A536B24B27E3C92FAC57EE21
+:10CF2000197475E6BC47FBF4EC94C16E633ED6C839
+:10CF3000DF62855F5458D86D7411BD36771FCA59AA
+:10CF40006461FAE42CC6F6B372EC9ABC6761D589C9
+:10CF5000C71F4AE1F6569AEA3A78BACE8AE3DF600A
+:10CF6000DEFE366D69AEF593BA442CCF4F93761042
+:10CF70005C60CB9C9A64A3E57A79FD37E64FD94192
+:10CF8000227595A39EFDB929A464C2EC43AD3996E0
+:10CF90000E1F07CB75D6644DF9D2B4319AF697DBE4
+:10CFA000B235F557E68FD3D4ABF35EE528D5B42B75
+:10CFB0004E0A66515C87FB60B980E764AF5DA27D75
+:10CFC000EFBE621C96A73D3FCB416ECA66A57EDAD6
+:10CFD000965A2FD16300F1694487EA70E5FA471F3A
+:10CFE000A2C122E286C6EE6776386DE710370C13D1
+:10CFF0002FAC00718E3F5CDC10192FA0FE7C90F4EA
+:10D0000067F1ABD758DB70DCCD55272EB0E13EEF92
+:10D01000CCC13882EC8D12470CC73F837222D904F1
+:10D02000FFF4C8F0DC10FC03F00B851F059CF63EF6
+:10D03000FA3305DF5FBF7D4AFA8DF3071EC5EF5750
+:10D040006044BEAFD8E8786F0DE5A7DE9181CEF9D8
+:10D05000E124AE03EB1BE87739C4F7B0E8E9BB463F
+:10D06000A7F0770FB9A6AB94FCDF1F7314BFAA71AA
+:10D07000FB5DA3CB42F570F3279AF670BB74B7A69D
+:10D080007C67A6B67CEF94BBC3FB0FE797356C5C5F
+:10D090006074A39C363C2C39BD43E88BC1F5A428B1
+:10D0A000FAA17B09EBDB43DB97196D71D1ED57E1F9
+:10D0B0007894B76C18C6DEAA7AEA3A199A87AA7FDA
+:10D0C000479DCF717EE7FB08714FF6CDF39AB0C351
+:10D0D0001F25B88DE17CB22F479C7BF43FF6C01D25
+:10D0E0005FD379EEEB22BEEA4F14F6A3A8F3339D8B
+:10D0F0000E61F108C15F45D6808EECD2C0D2580FC8
+:10D10000A09C352D8BF3E88AC98F087E681E4F5E80
+:10D11000C72D0F9A91CE1FEB741ABB3C40C11696D7
+:10D12000FB9EFDD98C3BE9F702712FE97CEDB32F13
+:10D1300007847DAD117A631EF19F62B7005556D307
+:10D140005D3068C748CF105EA89C6BBFF5FD87C9EE
+:10D15000CFEF117A83F20A37B05FE0B468F30D1DA8
+:10D160002CE7F8BB2DFC3ED759EB8FB7DA8D96F341
+:10D17000A84746D8B5798721F4C5FB57223D9B5E69
+:10D1800097F95ED0B1ADF60408D31F91786CDA2818
+:10D19000B39CABE5A35BE5CBBC6C0F8319F585D1E4
+:10D1A000F806A783E57FB555CCB77AD23733C84E9A
+:10D1B000AFEED68B4B2FC3CDB34E065BD83C9BB79F
+:10D1C0009996925D53D73F6055F449F75749530AF2
+:10D1D000045C3B847D45BFC090427E41BDC4F1EC00
+:10D1E0009EEE513584A73D12F86C253CC435665C33
+:10D1F000DF4C311C7DB7505E14D2F2F99EA51AD7D0
+:10D20000AAF1ECACEE5976F2633FEC5CB807290763
+:10D2100093ECD9CC4FD78287FDEE3D89AE74CA938B
+:10D220004C53EE3FEC490CF691BFBD6752AC44F74E
+:10D230001970FC3B697C755F7B0CAEF466DE9792DF
+:10D240002F75FE443E157BF671A2AA67EBE4DBA7BF
+:10D250005C49E7F773C04AF1EC7459F8D5F04721FF
+:10D26000CFAA5E6D92FC496CAAED33A6DB114FA3E9
+:10D270005A7EA9E47DDB35F700CFD6AF1E8CA35FC5
+:10D2800094987F563944BCB1AAFAF347AEC5F95712
+:10D2900061BC4FFEDDC2AEEDFB087F91F1FD607C0D
+:10D2A000F52FE67BA3E333D732DADFCD771CDF73CC
+:10D2B0002D44C769837181EA5F3E17CBE7D6A85832
+:10D2C000857C28FC7A645BEEDE35587FE42F0666A9
+:10D2D000D73727FDEAE8AD58BEF9B958C6F391240F
+:10D2E000F0901D39B229CFEBC1064B74C15EB26F0D
+:10D2F000B0258ECF693E7B32EFB72F517EF2B776E5
+:10D30000F643487E6CE8C27C46F78FE8FBCBA3B9B6
+:10D310001FB8C5BC0D8A5CCA2F14DE5F4DF52F24E3
+:10D32000737E42A5DFE127639C14AC7D05BE222BF2
+:10D33000B2DEE792E710DD5B5CA17B69BF847CF91C
+:10D34000D508F706DAF7F2C7FFF3C389B89FDA17F3
+:10D35000AEFE5515AE6FD907A940E384E83AB4DFB5
+:10D36000706C6BB6907F053F2B5E8CF11E0CD32743
+:10D370002B3B1235E5A6AED1DE83617A68F09E7252
+:10D38000A3C4E7048D8A5CED37BADBED94D7A5FB27
+:10D39000A94C3F711FB584CEAB08FFF79918FF91D8
+:10D3A0007CF6A25D396756F33CC9604E23B9750B14
+:10D3B000FC0DDC97B789E2319F3D49F13B82B933DF
+:10D3C0000AC3F9B377D51B9CE731897B8F31439F23
+:10D3D000EB77DA13B97D83F94B4D9E6955CB094D37
+:10D3E000FE675501B01F50D2662BBD89CE8714BA97
+:10D3F000DC9FEE7A8DF1DEF1C0ABBB189F4FDCF203
+:10D4000031CDBBD3C2F4835D4A3C16116F3598BF52
+:10D4100050E4EF698D7F7EE8B1BD4594FF38F4CAD2
+:10D42000B822CAD32E94FD877E9DC9F79CF6DF866D
+:10D4300070CBCEF7392F1EB9DEA87B0C92D0438D6E
+:10D44000B48F64BAFFE37AC7CE722EF4C3810D8520
+:10D450008C3F351F3D7064E878505DA73ABEBA3EF8
+:10D46000757CB5DDDFEC225FD06FF41791FD5F4175
+:10D47000E73061FBEA8FF717255AE8BB55F81349E7
+:10D48000580EE3B77FF5BC2AF27C6AF05C56C947B8
+:10D49000EDD3ADFD9911F9AFAFE321833B5CEF7E96
+:10D4A000CF732A75BDEAFDDA7EAB85FD9B937625A9
+:10D4B0001F9F0EE9D40EEB1D3EF2BFB7981CE4C7C8
+:10D4C000279A5C908BF86934FAF8FE9ADA2FD1E447
+:10D4D000E6EF9179F9814423D0BDE58154E5FCF76D
+:10D4E0002B60BD4271E8169CB7AC56D7BCC512D2B2
+:10D4F00087AAFE2C1B87DF0BE81EA93EE42720DF4E
+:10D5000094156BDB87F6A32DFF7BAEA06359B26E3B
+:10D51000C838B92457C8651B74C8429E851D9DA88C
+:10D52000E01D0DBF1CEED7AC52F4FC40BCD9430744
+:10D53000BB13B78A7BAB13F5BEED04510B404B1206
+:10D540005D99F489F1BAB4FA9C6CC81CB6CBE3D8E7
+:10D550002E4F50C87DB7D4CCF75B43F75CFD32C18A
+:10D560008B21C8D009563D412403C34BC0C5702A46
+:10D570003433BC0CDA195E011D0CAF023F43F8894D
+:10D58000AF0DD81EDC6E65FFE9F2253AB2CB65D748
+:10D590000EED97CF52F0353C3E50CB579C3B3EA60C
+:10D5A0002AF77287C5CBD87CE67B152F26E24FEC95
+:10D5B0001703DE34829320C0E34C2646CEA678DDE6
+:10D5C000C6F77E6BC1C9E5BAB3C44765C0AD77176E
+:10D5D0000C8197DAA1F9649EC22703B9C0F851E91A
+:10D5E000F548AE8DCB2ADD30504C237B104D4FC813
+:10D5F000A07596C5D61CA7A722B73F5F36538F7A72
+:10D60000B4ACB4660DA9905FE64E15E589352FD30D
+:10D61000517DFBF3978A72714DA9C1815EE8DACB27
+:10D62000665E82FAD9ADDC2737A311A07B6372B6A0
+:10D630003817762BF7CA4D72E65ABA2F66BA0D58CC
+:10D64000DFB86300FCECD722B791BCB8451C7BB3B4
+:10D6500055D0AF3AD67D4B2ED933B32FDE8674B872
+:10D66000796DDD28B29BF718C5F89FA4DAC6BD8195
+:10D67000F83299C4BD5675BF58EF89C17240B2AD3A
+:10D6800069C90CAD4B5DC759CC7BD7E9E6CD4F7767
+:10D690006F203D023607C7156314FBBE65CBC4344B
+:10D6A000F430701D565E47202E774D0B56DD91EEFF
+:10D6B0007A84C61B88137CF808D1297578E8CB7565
+:10D6C0003E943BC4F781B5DFBCEA23BDF4292E04A8
+:10D6D000C7F94DAEFB715A47932E90518AF4FB4522
+:10D6E0002C7A000521BE96909873100F6D4EF01A9B
+:10D6F000595E947736CAF9992A17038B713CC44F47
+:10D7000099CB558BEE2254CC6E7E9360A5BBBD1693
+:10D710006B689E17683D4D72B081F8E468E207C6F9
+:10D720004F596EC70AFE54F459F7B69EDBC688A25D
+:10D730000BC2E4B269DB89AFFF86746F3A66715041
+:10D74000F3903C3EB6469CE75A34FA4695D3095DC1
+:10D75000263E389CB8F5A2C5D46ED207BDD9A4B771
+:10D7600027F706DAC87D1EE8DE3B46C889EAD77F80
+:10D77000239D8B7DF9CC8CFC914010F9235E9C831A
+:10D7800073FCF48A38075FADE43DA9ECE17D8B784A
+:10D79000548D3B57F6BC2DDE8579F06F05BD2B12FD
+:10D7A0007F963E71E355C46F91EF8BD478B449698D
+:10D7B000B7A2D77B37ED27F2BD5113C5A345C3BF31
+:10D7C000376A7AA296E3D1C8F746BDB94AFE4AB194
+:10D7D0008FA0F8A14B9436B43F0BC78746AF09F72B
+:10D7E000B6FAC9350E2B95D32D0ED6C7573D0EE18F
+:10D7F000EDE18964E619559E97AD93D8BF56F15A6D
+:10D80000FCBCC949EB287E7E14FBCDE8EF8B7BE99D
+:10D810004A3E91DE12D07B83CD89C12CBA67BAB95A
+:10D820003BDF41FEF81F5A9DF00F43687D6A3C5074
+:10D8300027BF544BEF878E2DC2380B3FADEE79A634
+:10D84000CD8CE5D5EBE95510A584F313C8AF2ADFDD
+:10D85000298397C601EF43D5083B153937A5E9C0A1
+:10D8600016868F18DB08B00D910F3029F48BCD4F41
+:10D87000D2D4C7392ED0F44FA8CCD2D4B7C588F7AC
+:10D8800032E071FA0B2A42EF48129D3FD1F4830037
+:10D89000FEAD08BD17B9277EEA4E7E4FE26FE03C31
+:10D8A00045F265259AF62679AB4CFC5DFDA55E43F5
+:10D8B000CF9F52A61BF156B91BFD1C9C67429FB619
+:10D8C0003E26E001EA17B35BAFC94B986CDAF285EC
+:10D8D000794A9E622C8CD5E42906F12EF8FED86197
+:10D8E0001DF34505E4FCAABA8CF06C00AF2D1A6F4D
+:10D8F000C740F85DC7C65A1CF4966A42CFCB32C9FE
+:10D9000041AA4B8BFF51B3B5F81FEDD6E27BCC5249
+:10D910002DBED39BB5F8BEB0458BD74C8F166FD9B3
+:10D92000EB2668DADBDB6B34E5BC8D5768DA5FE445
+:10D930009DA1298F7BF17A4DFBC28E859AFAE2AECA
+:10D94000E59A7A95CF86E383F1BED511FCA603DD77
+:10D9500069F8A074E7CF35F3FD50F49F9FA7E80561
+:10D9600085FED72B76E5DDF8C3F792B84E8B157A96
+:10D970007030DF506DE078EE3D5B726D1CE905C5DF
+:10D98000DEB9147B07394F89B255941D7E71BFA251
+:10D99000649FAB36DE46F72CC4FD8A8AC3EDB50919
+:10D9A000D43EE21DD6F44A4973DE1DF92E6BA667FC
+:10D9B000AD9C20D1BD44713F31F21E84FA3EABDEF6
+:10D9C00019A339271FEEBD969A5FC278018C142FD8
+:10D9D000E8CCFC3E31DA1F726C94D95F73B3FFF66A
+:10D9E00067C9CD79A76BCCFE0CE2EFECB1EEF5790F
+:10D9F00088B7A33A878DFD3DE5FDD6006D8CDF2FFE
+:10DA0000F5CCA43CE90086BB94D7D4DFB36326BD34
+:10DA10005BC4E55B031522ACA63F8FE6B91FA4717A
+:10DA20000E48D6BB4BB1EFBB133ECF207B66A27333
+:10DA3000FE123EFF7E382FFCFC7B14EE0FF56D408E
+:10DA400067F3F079EECF258E533EA7C1AAC2E477E3
+:10DA50009D41794F2AE2B6B90ABED4B86D8E32FF25
+:10DA6000011C6229EAF3B95D7F66BCAC48EB53E266
+:10DA7000BD668715C7BF71ACA584EF7B394B1D22EE
+:10DA8000DE57E3B831F2F7B1B367BA87B522ED8854
+:10DA9000269E86979287CC5746E6C542FB16E31F23
+:10DAA000581FCB76E8C0FA74CE3F86C63FCAF985C8
+:10DAB000B9CDDAFBDDF35B3ED2F0DF02CF279AFA75
+:10DAC000404AD03006F71F7875F4D41B107FFDAFA5
+:10DAD000982A289E45BAF5E49587C60FDC97778982
+:10DAE000F01BCEB4CFCF791DBDCAFD5A759FFB5B2D
+:10DAF000F77139D01A88B8EFE4D1C4BF2A34FE09CF
+:10DB0000F2C98F0E4A231C43E57366E78B38A95789
+:10DB10007977DAABBC3BED55DE89F62AEF427B958F
+:10DB200077A1EABBDD5E099C74BF648EE47A6A81EA
+:10DB3000C4EF760FD13E9B96078BE85D635371600F
+:10DB40009E24F3BBDD23F47D8877BB459295F46971
+:10DB5000EA35F46EF7F008CF51B2D8D9F989D75029
+:10DB6000BC70D828E4A3F4C56F66D27BBDC753DD73
+:10DB7000C789BF3F95641FF3F3EB129F2B8333607C
+:10DB80009C7116EF7ABFCB13E73427F3C4B9890A27
+:10DB900047E60BBD564AB09CE8726F2EBFBBDA68F1
+:10DBA000E27757389F5317761F22F27D5CC91F4DCD
+:10DBB0003ED21F6ADE27215F9C37D3BB395A67CA22
+:10DBC000FD26F16E2EE0CFA07776740FCA45F2BD28
+:10DBD0001B9CE21D5EDEA6F0F73009F9CA3DBD458B
+:10DBE000A079A7B7B2E7C07ED227AFE5B993F353C8
+:10DBF00043EFC756C66F677FAF20DFC6F3E27A797F
+:10DC0000FFA817EE24FA9CC77C61567E79F4FFD7F3
+:10DC10006038BCF52FF63F5A90197AF716F6DEAD4C
+:10DC2000203F2CAFA7AE3F34CEE9E542CD7BA9E53E
+:10DC3000438FDD934B72867411F948599A3F63887C
+:10DC4000FED3F305FDEF4F774DA0F997378BBC60FE
+:10DC5000886FDA6FF998E8DC6319F23EBFDA3F7239
+:10DC60009F2BB7F5303E709FF3687F61FBBC8CF053
+:10DC7000A5EEB3BF7BEFA305B673DFDFF77D776E4D
+:10DC80001A81716DD2507976B43E617E9949ED3F2B
+:10DC900056AFED8F0E39E5B1BB48DED16FE954E2E6
+:10DCA0001EB2CBC417AA5DEE54E22029B083ED0268
+:10DCB000CD4B7271B7E461FBA8E63BDA24B47F94E4
+:10DCC0005770AF617B215F6871105F7722EFF94970
+:10DCD0001EF4CE58CE7347C4D73F8B75DF4478BC53
+:10DCE000F9AF35A328FEDEF2972B94384ED8AB72ED
+:10DCF000853FCB697EDA474102F36D99B2BE0A7364
+:10DD000033FBC955E091455E43C993ACDFC1F1DFF8
+:10DD1000FF011A14AFAAD043000000000000000069
+:10DD20001F8B08000000000000FFFB51CFC0F00374
+:10DD30008A739418187A351818366B32306868313F
+:10DD400030883120E46885AF7153A69F9B9581810F
+:10DD50001788F981581088D73331306C60225EFF04
+:10DD6000115104FB9E2003C351207F1990EE1466CD
+:10DD7000605805641F03E22F40BE801003830C101F
+:10DD8000FF1561603005D2C1406C03C4C745F19BEB
+:10DD90007F82807CBC082ABF1B8D9F278C5FFF255C
+:10DDA00011FCF20F08C863C33216E4C74722057A94
+:10DDB00007023729A2F28FCA33303C546060D05139
+:10DDC00082F09B91E4ED8062C7E421EC2992C0B817
+:10DDD00007CAB5286237772A50FE0450CE4B8934E3
+:10DDE000F7DCD341E5AF3484D000BC3E14E4A80393
+:10DDF00000000000000000001F8B08000000000071
+:10DE000000FFE57D0B7C54C5B9F89C3DE7EC6E92B4
+:10DE1000DDCD262121BCC22601440DB8400CA04115
+:10DE2000370F5294A8E1A1A2226C782421EF22F6A8
+:10DE3000621FBFDDF088C4521B1FC5D48B7651B062
+:10DE4000D18B3640D058175C9E458B6DE845A0D5E8
+:10DE50007A13405E06B240A5B645FDCFF7CD9CDDF6
+:10DE6000734E36266AEFFFF6FEFFDB9F1DE6CCCC35
+:10DE70003733DF7CF3BDE69B8964BE91D88713F20C
+:10DE800025FC6E25E451891092184E9B3C93C69F49
+:10DE90009409B1ED7E24EA3B99840C9E6B7046D1C7
+:10DEA000A25F08644E4B0621C9658D7546FA3D791F
+:10DEB000917DBCE808C319987CE4BABD09840C7252
+:10DEC000D3F66682BF2FE97F3FB737C69174C87912
+:10DED00085A231E1FA4A9ABC48FA7B87AABE9B1414
+:10DEE00075A6DD48FBFB51FD20B785901FC3784622
+:10DEF00042A9CB40B2E8B8785D6F2EFD3F3A0EAF35
+:10DF0000CDE85B2910221A1CB1442424262348A002
+:10DF10009DBE9F673CEDD74908A736AAC84AE74986
+:10DF2000C8B49608F57289807888CD76257BE97823
+:10DF3000577D2EE2BC570D22A49DD62792D34E6862
+:10DF40003A95C461BDC72D2306427ED5AE3F120768
+:10DF5000851B9B19245E15DC060F210E13C5AFC768
+:10DF60008CE92A8F9DA7C9C4710D21AB3D0E4C577A
+:10DF7000794663FAD8D027DB7306D0F90C32D8E99A
+:10DF800048488363A6DD91118627C72D30E73809FD
+:10DF9000C92629AEC4545A2FD140C84D84DC42F35F
+:10DFA0007523081949EC8450FC3D93BC2CCA9D0193
+:10DFB0007907E6450371C37C6332032E91E22DC6D7
+:10DFC00069CF951CE1EFF81B80DF5F782C15D6C177
+:10DFD0007D1BCCEF19E2ECF0029EDD46E7265A7F6E
+:10DFE000A5EC4C5E4AE18A46DA2E83ADBB94101E46
+:10DFF000DF4CC01FED8FCCC9D5ACD730184722B449
+:10E0000073DC05EB6471B2755A097415611DE6F293
+:10E0100075586577D919FD384924FA11ED5AFAB1C6
+:10E020006468E98F7EB19FBA9EE769BF4D42ED3BC0
+:10E0300053E93CBD4B0CCE4DF4DB60A15100F80A16
+:10E04000BC25C480FD2AF9416552A063B41A9E170D
+:10E05000CBE9F7F60E73CFEF2D06E252E872532AA2
+:10E060007C77C4CEA0E3266647EC4C6BCFF187E902
+:10E0700024D925C940EF0E4C1B0447AC00E37C4774
+:10E08000249B049C7F72A4F6FFD3ED08F1E17A375C
+:10E09000F07554DA513C203D791F8B463C88503452
+:10E0A000390CE7171CCF17AD454F434A48E3685872
+:10E0B0005F9A5F87F463A6792BE69BB0DC1ECA3FAC
+:10E0C0008BE5C9AC3E5D5EBA18BDE3555917DA6EF3
+:10E0D00003C29142705E44389650BF9B303F2094FB
+:10E0E000FF25D61FCAEAF7B71F25EDCE0D9EC2F950
+:10E0F000BF2E3B009FC2DBD6C0AD942E0E6E107CAF
+:10E10000269A0FEC8C41FE757EFD0C9F89E267D745
+:10E1100038930BEA9FDF9883F9BCEDEFDB245A5E5E
+:10E12000B55D94206FD879D6D641F15B636A7FFCE8
+:10E1300066FA3DB85D242F6077D3719F9DE2B448A5
+:10E140003E63F9922896ADDAB06B1EC02D6B339109
+:10E15000280AA7EACDD23B6FA6F9D20332812A550D
+:10E160009BEA8C83697E894F6881FC8A9D1F603F92
+:10E17000DDB9A40CF6F739E05B942F75DBDA93EE8A
+:10E18000A6DFCB7D5B0AA07EF966C1094B5CBE7E33
+:10E19000D78700BFBC551E2152F815CD31C4A1DA76
+:10E1A0002F79DB17DF09E3AD7A472694ED91B2AB07
+:10E1B0000F199118A44623E0B56AD31346E09BE7F4
+:10E1C0003C07B01F059F552FD37E68BBEAD70427B5
+:10E1D0004CADDAC0F8CD8537A3E6BC688179D51996
+:10E1E0004741FB371F3542BD525FF1EB510E18DF3F
+:10E1F0000663018C73FD0663898A6F5634FF5633BC
+:10E20000AE534DE903DD19BDAFE739CEB7957C3983
+:10E21000154048DF92CF3843C5879E33C421FD5750
+:10E22000348BC411811F78DFE7FB608795F103BE53
+:10E230005E4BEDC01AC2EB75C9CED74F0A66CD88CA
+:10E24000C0E71EE7F2A391CB8F27417ED0F4692E61
+:10E250003FD671F9D1E471E2F7673D93305DEF711C
+:10E2600061FABC671AA63E4F11D67BC13307D38D26
+:10E270001E377E7FC9538669B3A716BFBFE2598E8A
+:10E28000E9668F17BFBFE65983698BA711D3AD9E8F
+:10E29000264C5B3D3EACF7BAA719D3364F0B7EFF39
+:10E2A000B5A70D53BF2780E94E585F9A063CED98FD
+:10E2B000EEF61CC374AFA703DBEDF79CC1742DC74A
+:10E2C000BB2D9BE448146F36174139185FE8CA919B
+:10E2D000693EBE88E593E67A738C349FE4A6798A1A
+:10E2E000C7C195811C13CD0FAE65E5293F24B966E2
+:10E2F0009A4FF1B2F2B4B5AEDC289A4F6B64E5A345
+:10E30000D67B73A3697E948F955FB739901B43F3D7
+:10E31000D7B5B0F2B17E9267A1F9B101961F7FD057
+:10E320009567A5F9F1ED2C9FF5A137CF46F3591D5F
+:10E33000ACFD4D5D81BC589ABF29C8CA6FB94AF27D
+:10E34000ED03402E0B98CFB5E4E4C7D17CAE9DE53C
+:10E350000B86164B8E08F4B753EE5808227C86B015
+:10E36000D125517EB3D3D8F110157D64A1F0AA4B0D
+:10E37000A2FC3320934550FEB0F03A96078C641906
+:10E38000943F2ABC8DE5BB650796FF5C38C0F2461A
+:10E390000796FF877008F37B651796EF10FEC4F2AF
+:10E3A000461796FF5E3881F9FDB21BCB3B852E9652
+:10E3B00037BAB1FC49E953573EED2FDFE09E2EDC22
+:10E3C0000872DB5D8672596A49067E59CFF9FF04EF
+:10E3D00040062DAF1F644439B8F3F3AC174581D321
+:10E3E000F600C897BC04FA0585335B48047D82C2F9
+:10E3F00011FB8673CB179334706EF9A24C81F32016
+:10E40000C289EA1F9C9D5FDCA41DCF17E50A9C1200
+:10E410009C97B57FF3BAE5CB6CED78BEAC54E0D4F5
+:10E42000209CB8FE8D27204FD4C009C8A50A9CE5C2
+:10E430000827B17FE37119276BE0B88C4B1438754E
+:10E44000086750FFE0048C376BC763AC50E03C8634
+:10E45000781ED6BF79B94C53B4E3315529709EC2AA
+:10E46000F1A4F60FCE6EAB163FBBAD21FCAC473826
+:10E4700023FB37AF5C9B163FB9B6107E36219C6BF1
+:10E48000FB0767B74D8B9FDDB6107E5E43FC8CE9C2
+:10E49000DFBC7263B5F8C98D0DE1E70D1CCFB8FE86
+:10E4A0008D676FA2163F7B1343F809209C1BFB3737
+:10E4B0009EFC242D7EF29342F87907E14CEE1F9CDE
+:10E4C000BD495AFCEC4D0AE1E70F08674AFFE695A3
+:10E4D0003F508B9FFC8121FC7C807072DCCD4CA96D
+:10E4E000A470ACBDC3D93F4C8B9FFDC342F83989A2
+:10E4F00070A65238E97DC32948D1E2A72025849F20
+:10E50000F308E7B6FEC1D99FA2C5CFFE94107EAE38
+:10E51000209C3BFA37AF82E15AFC140C67F8B955DE
+:10E520001A877286CA4E27D8E7DF199AE31232C1DA
+:10E530004E6279D1EE24A0F7888A3E43DA5D22AD9F
+:10E540006FD91C37FE31A2D66B728D064ACF56AA00
+:10E55000E5A9F59AD849D11A3D2ACE15AFC9274C5D
+:10E560001BACA99F5894A6291F38E73A4DF920F70C
+:10E57000784D7E48D94D9AFAC36A7335F9E1CB6F6D
+:10E58000D7D44FF5CED4E4D3D7DCAFA93FB2718155
+:10E59000A6FC9AA6724DF9B5BEA59AFCF5CDDFD7BB
+:10E5A000D41FD3B242537E43DB639AF27181273585
+:10E5B000F909079ED5D4BFB1FD054DF9C463AF6815
+:10E5C000CA27776CD5E46F3EF36B4DFD29C1DD9A08
+:10E5D000FCAD9FBDABA99F43FE53AB6F9B3FD0D417
+:10E5E0009F6A3FA129FF4EF2273A3D556B1FAFCCE2
+:10E5F00021CCAF3288D9AF01AB11F3C6C11666A7E3
+:10E60000584B1C2729FD18772F740CA0F4033403F2
+:10E610007651CEE0B26B3AE8F7EFDDE4BEC64EBF0E
+:10E620007FCFE8BEC11E41BFA1F4269064481D06FD
+:10E6300048F5E58FCA8CDE73875C1DD549DBD7189A
+:10E6400082A3E268FE2331E73EA0C7F90603EE830A
+:10E650006891D442BD681341BBE9D1D4AC17BDAABF
+:10E66000FDB06618D5338430DC35B23B19F528C3CC
+:10E67000F83AD09BEA87D1790D2664D18A71BBBC68
+:10E680002368FB6125C9E08F3019993F24D4BF91DD
+:10E69000F69F81FD2F81FE6B7AE9DF943649D3BF67
+:10E6A00039A54CD3BFD948FBB713F290E126DEBFA2
+:10E6B00019FD36CB564CC6FE4D2965D8FFA3466AD8
+:10E6C00077A9FB8F0EF5FF8881F6EB3130BBB9C718
+:10E6D000FCD36ED2CE3FA55C3B7F239BFF4A432EEB
+:10E6E000EF3F1AE7BF6A450E9B7F4A399BBF89C13E
+:10E6F0000DF56F0BE1BF01FAFF692FFD9BD2B3B59A
+:10E70000F31F5EA99DBF89F5FF94E176DEBF05FB8F
+:10E710007F7AC56D6CFEC32BB17FA3C9ED04FA31BE
+:10E720000E89AEF5D1FEC9506A250D0472A1FD40D7
+:10E730003A3A1EFD08771AD2701CDF8B66F47625F4
+:10E740009AD21BF2332FB3C37D947352BBAA9AD3D0
+:10E750007AC5E61C23F03D2C4F2264311FEAA23615
+:10E7600011E99B3C6DF28DA4E3BDD0267A21BFE870
+:10E77000E9293EE0AF352632BF08DA492400DF3F01
+:10E78000FED99817D4F3D2A78B1BE55391FC45DE35
+:10E790005C32BA968EEF0210812A7F9CDA71601883
+:10E7A0007F48ED1E42ED9F1332EBEF236AEF41BE2F
+:10E7B00083DA7B6838933AE657F3BADE1F41C75FC6
+:10E7C00044949F0BE7792F6E290A4F62FBF7F85AA2
+:10E7D000C107EB317F790C457E783CC5DE044DBE28
+:10E7E000C6C4EA076F137C2F0808C30DF899C1E16E
+:10E7F00011182FCDCFB1B3364777DEB15FB0D17DE1
+:10E80000B466085D8B309C59C4250FA4EDEF5E56AD
+:10E810002C836BA75D1086819FB066A14C02683780
+:10E820007B134906270E3ADEFBED0CFE0C977C525B
+:10E83000ED479B239B5D45743C738A451CFFAC6987
+:10E84000DAF23FED8C7119C6D274CD53D8CFDD45C5
+:10E85000DAF27BE768F3F7B9B5792A576590AB0F21
+:10E8600094E9BF53B42481DF31F41B00E37C90E3CF
+:10E87000E1C15AD9AB59576A761B95727084B809B1
+:10E88000CE0BDB8B3DEBCF5FAECD177BB5F9856B48
+:10E8900074F039DD9CE2EB7F1CE883A6A7813E285B
+:10E8A0003E4F72FA08F3552D7DDC139A06A30F65CF
+:10E8B0001EA724B604A7D633FA58DC1813991E8A6B
+:10E8C00043F4E052D397420FF3383DFC99D34369A8
+:10E8D0009396AEEE23BED5C9B4FD036B77E13A1D26
+:10E8E000118A193DFC40A1870E0D3DB8393DE8D78E
+:10E8F0006F1EA787798F307AD0AF6707A7878EA65C
+:10E90000CB3249EBB9AE741D3479BA0EBA75B7A3E0
+:10E910001F8AAE47447A58109A379D38CD2FE46548
+:10E920003DD68BD30396A701DA09E209DBA7F7AC42
+:10E930004FF984265FDA1479FD6BDA36AC3DA9FA1B
+:10E940005ED5F2F25AB57FBBA2798B26BFC4F7A67B
+:10E95000A67E69D32E4D7E71E33B9AFA0BD71CD26B
+:10E96000E48BBD7FD4D49FBFBC5353FE60ED594DA3
+:10E97000F903651735F9FBDC7FD3D4BF778EF0132D
+:10E9800075FEEEA2A89FA8EBCF9A16A7C9CF700D6F
+:10E99000D2D437ECBCF62EA0C783EF8B04F48F4F94
+:10E9A0009DA7D1FFF9A95376429D931E07EE83538D
+:10E9B0009ED1989EF138719F9CF34CC2F442DB1EAD
+:10E9C0000BC8152A474BE0C8A674E596BA35D9207E
+:10E9D000D709CADF8A956FD4798712B21494638AF3
+:10E9E000EFC22623094C204400E1C4C7151455E5A5
+:10E9F0001D7D9437514191D0B3BCB023F2F79A27D3
+:10EA00008B87DB239C7F84F73519027A52772FE7B7
+:10EA100024950229527F276405F281AD5C4FA93409
+:10EA2000327E51B975502EB1413E30AAF6ABFA6B29
+:10EA3000A19B6C20D049BA663F97365DAFE1F704E1
+:10EA4000BCCF89406F1334DF2B9A6FD6B4EBDA2535
+:10EA5000E2B8AB819750B9FD2A297A52043E15D805
+:10EA600093326B0C8CD3F514E6DB12518FECF2343D
+:10EA7000AF85F3C7739E164CCF78DA303DE509AC0D
+:10EA80008573C0939E03981EF7B463DAE13986E973
+:10EA9000479E0E4C3FF49CC1F44F9E20A6C73C9F5E
+:10EAA000617AC4437E02700E7BCC98FEC163C7B40A
+:10EAB000DD938CE9058F0FFB51F65D5F747786CB94
+:10EAC000ED73407F11E86CBB78AC6ECDD0309DBD4E
+:10EAD000B9F223A43305CF854D264E0F491A7A0883
+:10EAE00080ED7723D04B1FE54D32A7C3DEDA472EEA
+:10EAF000AF79E1BF87DEAE7C4B7A0BD3D3101D3DDF
+:10EB0000A5F7454F1FAAE9E98AC1CEE420A7A71FB0
+:10EB1000F3736B7DBF51123BA70CE977AEDB0C8022
+:10EB2000AAA5FCDC84906998BFC4FB5E49C1B5A36B
+:10EB30001EE81B0D72EBD2E8BF8F8273874BC7E8CC
+:10EB4000E2A7F63E3F3D9DF48E7717DA43253EBAA5
+:10EB5000E80911C61BCDF01A6520D3C878421A46C1
+:10EB6000BEE45C90817989C4437B9F734684F33A09
+:10EB700042756BC06F5F785D69BD3216E09D7AF6B5
+:10EB80001F59905EE1FA75F41E11F57C1278D109D7
+:10EB9000F80DC925933319FCF3C191463BEA09648A
+:10EBA000BA167FDEDB35F86B4855CECF1B93117F4D
+:10EBB00023AE8C1AD40FFCF5C5DFFBC2E70298F731
+:10EBC0007F033EFBE28F7DF145E272BCD646E7DF74
+:10EBD000BD73CCF8C71CC007BF1ADFCA799C7E3C46
+:10EBE000F992F4B5E8B83B49A1E3F614885BD82460
+:10EBF000DA11FEA5D66B62615D4270FA584FE1ED05
+:10EC00003FA780BD7F3E550B2F4B07EFD281176D7D
+:10EC100060772D4D5ED87032C23A2869554B5D83BE
+:10EC200045AD87B669F3971A85692D382E47ECEC08
+:10EC30003120276A1B18DF5E8EA90267697209F608
+:10EC400073AE393D96D97B3EC60F36C721BF38E734
+:10EC500029C3FAFFECF1F40647190F21ADE484193A
+:10EC6000F8312D4BEFBD7EAFF42CFDC588E7DD7E7E
+:10EC7000F90AE88966FADF9760771009F30ADC9AE7
+:10EC800016D16BBA01BE6FD6F447DB399433E22F4D
+:10EC9000D3BE6ADF48E49442B7545ED483BD80E7B4
+:10ECA0009B4B1AD47A5955CB7735F99AB6471AD473
+:10ECB0007A5C05FC83F25F522B484037959C8CBAF6
+:10ECC00025CB1A818EAF18824F808F08AC5E95B924
+:10ECD000C3E8A69FCEB7B275EB6D7CE73CE65488DF
+:10ECE0003B283337E2397259CBB5F92067CEB7AE3E
+:10ECF0004C02F95B215EFA5E5184F6BF94042E5FEC
+:10ED0000E4A056CFE7F441285CD5BCE9CF12C21786
+:10ED1000CD7719985F460FB78DCB91BEF053BDF9F3
+:10ED200050C1CD8E9E78AA6EBB6874235FA4FFCBC2
+:10ED30000AE349C15FB154D426D171973777A2FF56
+:10ED4000E28CEC1DF583AFE0973DE767493E15A3E4
+:10ED50009A9797B4433F0B26F18E88E3DE0F281F66
+:10ED60003FFB5B99001F225769AD2C74CD70BBC768
+:10ED7000400C5961BB67416B4521E0FBECEBD3D103
+:10ED8000EE5B448A6CB80EA4310BEC9CF3C480712A
+:10ED900055E7C91F6C1354EBF0B164E478A65C30FE
+:10EDA00089BB3410BE7B10D85FA639F5EDE258F868
+:10EDB0002E297690F025CA15B780F11773D8772FD2
+:10EDC00031D701FD527B4A63AF517B4A93A7F6943A
+:10EDD000265F426626413C45C9D332F10988274D5A
+:10EDE000F941C98EE32B25B5F5A01FFD9CFBE1166B
+:10EDF000D8893484CA87AA379ECB2AA6F3E9929889
+:10EE0000FF4B890F584265C5205A5E5EE633BA2C27
+:10EE10003DE777A275C23D94F3033C160770BFD15E
+:10EE2000C7E26B8843CAE2AA4F5AEFF31FD82ABA47
+:10EE3000A26C508F7E57C69BFAF5E7AF9F2F214FEC
+:10EE4000E23CCA9B67601C568F78073E1FB9597019
+:10EE5000F922EC27511634F12E0932C39FE2D71A5A
+:10EE6000AECB5F0F7995DF6BA2AEFC1BF39701442D
+:10EE7000C35F8A25F7703991F113C0BF2005717FF8
+:10EE80007D63F8C93DE05F2FDFF84F843F54BBEF4F
+:10EE900029FC89FFD4F18FE831FEBC48F0ABDE7865
+:10EEA000F57588772CFFD5CF6C84EEB7B35263929B
+:10EEB00093AE7BE5A6D53617F01DC96B837D71D661
+:10EEC000274E8B440FDF9779DC1F715904F0BBC2CA
+:10EED0003F29FC73AFFCF84EB0A3AE6C92EDE84F47
+:10EEE0006D36054C949EAB5B971492B198EF64F924
+:10EEF000472F02FDD7B4C9C7D5745AFECB9F254111
+:10EF00007C10A5942186644803689F546FFCB80068
+:10EF1000F48D1A12C4FDAA6F07FD7F168FF2B0D8C8
+:10EF200018DBB31C1D3449D09EFD6A5A7F7C51B456
+:10EF3000417ADB69E06FD4B244BF90BE5D19B73B44
+:10EF40002A64EB00E4AB13C944E0AB0A5E888FD9B6
+:10EF50001D2B5F7E666C271D57D7C6DFDA0415BEF2
+:10EF6000147BE952CBC25FFCDAD13B1FBF40F7A351
+:10EF70005ABF55E494A38DDB4B7E9656CA011BC441
+:10EF800073556E909D5EFAB9F2D5175F7A16FCD96B
+:10EF90007F34394752F815AFEE3B7213CD576C9161
+:10EFA0000714B2695884A4F0FAD4D0FF968F0FAF3B
+:10EFB00047F9B67D46C718F6FD87F1E175A9D8B2C5
+:10EFC000CB48C6F4C4475ECB2E638725C2FAB4741F
+:10EFD0001680FEB7F2E5BF1A81EF9DDD299081A969
+:10EFE00011F0B9611FEA8780275C4FBE5EA1F5D39F
+:10EFF000D5AFA1EB027246BF5EFA7A859CBF005C7A
+:10F0000088B3A1F4FDDAAF210EEE4F2627E0A1EC84
+:10F01000B5876C309FD3522DA3F3E7562701BF2B42
+:10F0200093BD49764CD9F7B2E71F46FA2B3DF470F1
+:10F0300012F357BA061950767A07C13C17AFBF1BB7
+:10F04000E75942DC488765CF89453E9A7E2A916917
+:10F050005B22EC934B7C9F9C7E812E2E9DE7694525
+:10F060002EFC41E472E1BBE80F7D98CF856A909851
+:10F07000FFD4CCD6EB806CD0C8D110FD6E7C14E5EB
+:10F08000C7B961AE8170EE561396172847C4435333
+:10F0900007B275627207DB51B99307DFA17EBBEC43
+:10F0A0008A1AAB69877246E97F19EF9F8E3B1AF483
+:10F0B000B7D34991ED91E146850F503D434567AA8D
+:10F0C000FDCEF6FFC606B6DF95FDEF9B310DCAFFFC
+:10F0D0007298ED23680772978E2B3010CB77CD1680
+:10F0E000903F984820D23EDF28F37DAE2DD7D30B3A
+:10F0F0001DBF24C4AAE806FA89C77540795FF234B7
+:10F100006DAFE2A335D0AFAD275C651F97727E70FF
+:10F110001EF8C1F5617E40D627F62B5EB452F6BDCF
+:10F12000F42CEC5FBA5FBD0ED8BF7211CCFF93CD4B
+:10F130007B8EDC4FF7ED272DCABED5F255FDBE2DD7
+:10F14000DBFA30C69FEBF7ED27436B49C47D4BBF1D
+:10F1500047DCB7433BFE47F8AA82C724A396AF2AF1
+:10F160007CB2377CEAF9E416D98178D5F349FA3BC9
+:10F170004CB27AD2A342870AFD95FF47D570E0478B
+:10F18000213A55E83044A70A1DEAE7ADC5A3BEFC05
+:10F1900023F02D527A297A53C6F3954A3F8B03A662
+:10F1A000EDF60FC9447CB950CC91C6FD4306A8F3D7
+:10F1B0003E5DBE4557DFA5CB17E9EABB75F95A4D51
+:10F1C000FDCAB63D46827410D0D41397FF3B393147
+:10F1D0002112DDFA98BFA1F5A211EE39D45882D8D8
+:10F1E0005E5E41BC101F19DC21E2B95137C5713D8B
+:10F1F000F83736A7FABC948FAC8E627E856E7BD0D2
+:10F20000164FD3D5712C1F4C34D6031F54BE07A301
+:10F2100098DFB1BB28688B53D95B9D7E11F9788745
+:10F220002FF2BD0D2A6970DD3B7AB9D7A19C8F758D
+:10F2300047DBC6627FD1293EA0C7A9A2256539F860
+:10F24000A11A4527E8EC8BEAEEB5C17955B73FFD29
+:10F25000AE39F4FBE27744168EE37549835476D0D9
+:10F2600019E25D972D405CF05AA49F857E66172DAC
+:10F270005A1B793F94F37625966546E0BBD40E3948
+:10F28000AE3EEF51E094ADD77DF74FE7FBA611ED11
+:10F29000FFF28DDA7237B79F7F64E4FC671C19C7F1
+:10F2A000ED57E6BFE17C7BAA9871D71CBA3EDD071B
+:10F2B0004462A2F94B7E11D7E7D266C107FE37E25E
+:10F2C0004DC4FD574D8246F57D882ED85FD7F4CECC
+:10F2D000C7BAB6FF39EB074047AF7F30F6DF69DAD0
+:10F2E000F5FA1F47BD05F9378EA67C407AD6CFDBED
+:10F2F0001985F102DD3BAD48FFDD3BDE4BF901E452
+:10F30000DF3439619CDD3BFF3A16E8A97B85A90C07
+:10F31000F860F730E6BF5DB9E3AF633B50FEAEC2C5
+:10F32000756C361A999FC9FF8F8FE0DEC2253F9D0D
+:10F3300015E8173CAEBEE6D7513E82F0FF9AA5BE57
+:10F340000FF46DE753CDE343BAAD64CE56185F1C9E
+:10F350008B7FA8796BF28B75B4FFAAD65DC685B496
+:10F360003CEFEDCFC7621CFD56A6375D903B9E87F4
+:10F37000F8876DC6EFAC94299E2FC026A346F65D94
+:10F38000A63579B08F7AE2E573F4A7F5171FEF1A67
+:10F39000997DFDAF8F0FC1C5F89FD5671660DE7FE1
+:10F3A000FBE803F4839A902E95F97ED25287FA4CAB
+:10F3B0005FF33EFBBF860EFA3B6F21D09F799B4DDA
+:10F3C000FFDAEBFDB8D181EBA2DF073DE97CC7F79F
+:10F3D00030FFAAD589E3ED27BD8F36FD3FB6EE5B42
+:10F3E000E9BADBFA9EF777FEC5E7DDFBBABF338FDC
+:10F3F000AFBB1DCE536BDEFE1CC7F775F95CE9FF92
+:10F4000052BA57F4FD7643AD3D938E6F0E69B482C8
+:10F4100062715FE2254BA603A2702F0FC0F83B3844
+:10F420005F8D6057359998BFCD241858BCDADD82BE
+:10F43000E247443BEB4EAE5FDC39B40CF5903B5DEC
+:10F440003F417D8248B5ED39B47E7BEE4227C66AE6
+:10F4500092F1C7DC909F3D85E7B5F6E6EF04E21236
+:10F46000A87E7F67EEF403A0E7DEE512510FA62920
+:10F47000EABFEFA714B0EF93B4F6D07D6E6DFEDE59
+:10F4800039DAFCDD1CDE3D848DFF9E22C1077E58EB
+:10F4900053CE5389E097352D9689900A7146B5ABC6
+:10F4A000C1EEB8BB48DB7E1928672A7FE337C5E386
+:10F4B0006F43785C8A78213922DE03ED138F7CDC80
+:10F4C000EDB3C7F920CE9A484E86C77BAA9CE83791
+:10F4D000E7F6B8CCDBCB9635EDB09F659D1DAED879
+:10F4E000D3BDE19B70FB1CE1A485F12FBB44B4CFDD
+:10F4F000659D7DAEACCBD75D0F651DBFEDBA3C07FA
+:10F50000EB7263785D865A5C04F6ABCCED877C8B3E
+:10F5100093E587161176AEE8C3FAD20017F1668438
+:10F52000E3D197988B2BE09CCC3C5A407FC85D6B15
+:10F5300045940FE60C01C7553449C6F8E38F0D45D5
+:10F5400059B0DE851326567F9F0DC309F85CC2F1C2
+:10F550005E426A517F2557BFFC323B0BCE2508EA3D
+:10F56000BF4B5C84DC41EDB8926C21100DF16A1246
+:10F57000F1C68E073FB9408E6BFCE4DA3CFC6E4965
+:10F580000AC3E9AB7E6FFCE59F9DFE17E567C729BF
+:10F590009174423A12BB97D476F77C3FC3634DA572
+:10F5A000E04B43BA0BC8EAFBD30566B60FFEEB8708
+:10F5B00013904FE6FC744C2CF30764E27DC41A6E82
+:10F5C000375CF23A62C10F76C99FCECF73F36C6A93
+:10F5D000BEAAA487B81DFE9F109748D3EE7CA15108
+:10F5E000043B8B04D1FFEBCD8FC27BC5FA76A3CC55
+:10F5F00006BEAF6BD12F003F11EEAFF27994D2A6C9
+:10F60000B1F1AA755B7BC759696CCF7580DF71D585
+:10F61000F9DDB7C52FD8FD80D743511D054511E64B
+:10F620003B89E3AF70F7DFF0FEEA4C7FAA0C7899D4
+:10F63000992F6ACEF99D66EECF984026C0B80A771A
+:10F64000DF669B0CEB724074C27DD51AFF45A33B6D
+:10F65000C2F9B11E9F001FFCF027646709E0F3C4E4
+:10F660004FA208D8D5EFF173C90CB8CF9181AE1E67
+:10F6700017F81D73CCCC4FB8CE6CC77456618E9CF6
+:10F6800048FBCD68B58F8350B5C1BCFE3AB303CB00
+:10F6900087F0764ABDC195AC5EA7D15E1D69FEBFFD
+:10F6A0008B12F87999F37B93847FBD75CBF9A935DB
+:10F6B000900BFA41BEE267D1D335C1FD71699AE082
+:10F6C00003F90DF630E60B05D41FDE53EEAFCF6421
+:10F6D0007256A17B3D9EABCDDAF7021EE7787F889C
+:10F6E000D387826705BFFAF12AF529BFBA55ED9F86
+:10F6F000BAAB6DDC6BA0DF54FB05BB8182AA963AE6
+:10F700008CB00F6BDA9E90E17CE63E07834BA4A29F
+:10F71000B1EAF8837566160FB267FCCDF3804E2E02
+:10F72000AF35812C24AE45176DC087DF33387F0F8E
+:10F73000716CDEDF8964D357F0AB0F3CF6F27C5975
+:10F740000D3715E733AB32470677DA0395BBE48113
+:10F750002A7A5A678EC772E5FBE04A07BE0F42FB62
+:10F76000C371781F3711B84F92D1D28EF76C1FA892
+:10F770008D637458D6B2CB88F954CD7B224A3FFAB8
+:10F78000FD34BB501BAFBC30AF6328E0A5D014588C
+:10F79000E68C40A793A39473CAAF29275C946EC7E5
+:10F7A000FE7F2427962972A203E3E395F602DFE7A2
+:10F7B0002A393130929C585AE71808EBB07447FA4E
+:10F7C00040D8244BDF999A14494EBCEF61E7CC47EF
+:10F7D000F97DF6EED9544EDCA09213B3A3904EF40B
+:10F7E000ED3E51F6495F724259B7FFCBFCE67D9082
+:10F7F0001311F6F7173A39718FBF18E5C43DB345B9
+:10F80000CDBDAC4FFB94133949F7615E76C644A079
+:10F810009FF7B97D7394DF0B807E405E6446D911FB
+:10F820006F7AB9D11B5FFF537FF9FAFF109E15BEA7
+:10F83000BE94DA3FA6D4487448909E97DE47F9BA42
+:10F8400000F4C8F8FAD207B99F53C7678B80CF6618
+:10F85000AAF92C6B5FED6672A1A62DF599B9B4FCDF
+:10F86000FE46D909A2F2FE30DFCD52F3DDCCA85E10
+:10F87000F86E19E3BB97FD13507FEA6D7E7FE6FCBF
+:10F8800096F2B311CE08F431676E8CE6DEDE897134
+:10F89000BFC9D806FBE53D11CF793FE67AC0C171FB
+:10F8A000BFC9047DFA493E9E797C3D2F7848793E58
+:10F8B000C55FDE22A64F576D16117FD5AD6CFF5781
+:10F8C000370B3E07CD178CFF1B9ED756EC60E7B574
+:10F8D00074068539AAF5AF78AFA31ECE092A36087B
+:10F8E00078DE0CF71E009FA51C9F25CE0A3C5729E9
+:10F8F0006DD2FAC11BA26D2F901B101EFAC3AB78FC
+:10F90000FD425310CF1D0A7F293837209FD4B6AB54
+:10F910001A71FB59B04F2A9A75DF9D0D78AE0437E6
+:10F92000D441AFAD6AD1967BF8BC178B818C6D1436
+:10F930003EF93DB3F3F478F7E8F153F62DF173880F
+:10F94000E227F39F879F25FE5D785EF075F1A2C7E1
+:10F95000475D143F1F184F32613F7E6C70217FF16D
+:10F96000BE2BE2BB4E8B9E18A9790FE5A71C2FEF8B
+:10F9700019DCF583A05EB580F54AD76FD99744F3BB
+:10F98000735BC8383866286DD2CAE390FC6F75A0E7
+:10F990007C9F5BBB4580B8DAC5FCBE6099EF097CF3
+:10F9A0003FE6C1E554DED3FA0BC79BDC705E7E28D0
+:10F9B0002A88FC53A1DF9D40BF946FFAF9384E0CA2
+:10F9C0000EE6A39C6A13ECB82F03514C6ED17582DE
+:10F9D000776DF64CFE6B015F17E65F6A63EB584389
+:10F9E000D70DF675819FE75B983EF880FF223BE7D5
+:10F9F000F4EF92D9FB380249407EE744FB5C918FDB
+:10FA000070EE9A93A45ADF1D9D8CFE37094EFCE0E0
+:10FA1000A3FFFB36EBDBCBBA2AFA4C7FD757C1D317
+:10FA20004EDD3A1F8A6A2F9C80E7728213DF0BF249
+:10FA3000C7E179D1C946F6FECD41AE1FE9F705D839
+:10FA40001FEAF77866C0C0212E7A5A14C69562BFA5
+:10FA5000694C3F53F329FD3B485F376EA986B4A339
+:10FA60005E168E7F74DF6E06B93F4DD0C449D11942
+:10FA7000E1BEFF27C097A3BE023E4936A37C79C8EA
+:10FA8000CEBEEE196624F01EDAE53532D2D1BD06BF
+:10FA9000C7916CE02F8FC904F6C7E583371E9D3BE5
+:10FAA00000CA45A48FE2F72654836BA598C5AA9196
+:10FAB000E247985C3AC1FBFF1395D7AE6B7897A0ED
+:10FAC000077BE27C70BF74B673D75407F85B320FC4
+:10FAD000AD8673CF5979F62347601D1BD8BB4FC73E
+:10FAE000D7E4A19DF6D07705DC67C7E87A019CBB17
+:10FAF00067A71E3942C7F7E09A443CB79CEB4ABC63
+:10FB000007CE31E71E149D0E5A6FE15D560B9C7FA8
+:10FB10004E1F2D12B70A2F0F9276F4EFCCADFDEEEB
+:10FB2000DDB04FCAA83C84F79CCAFC87A60E84FCB3
+:10FB30007A01DBD778DD46B8E7D9DE74D19849FB86
+:10FB40002FA1F500DD35EB59BD9A8D02BE1758E2A5
+:10FB50007F02F964C946011FC469A7FAAF99C1F5CC
+:10FB60008129D1BE9EB6A7F952680F7037C6DD0352
+:10FB7000E79335749CD87E521D9E5397D076B498E7
+:10FB8000B46FFC2EC25BB25E2070AFB06C52EAE381
+:10FB90009300DE41D909E54777FDDC08E39E47FB8A
+:10FBA0001B44E12F143BA6427DF203C18EEF2E15BC
+:10FBB0005E8BFBBA9BEF3B621FCDE21404A2DCEF2D
+:10FBC00093D4F12A25D169B89F4A96D7D5C3BC3AB8
+:10FBD000BC89A906A4A78B4690E32729BEDD547FE4
+:10FBE0003D616471307BBC278C1D2AFEB9323A1D01
+:10FBF000DB2F6ACB413EB39814613C85BB8EE92371
+:10FC00009DABA37CE057EB94ED29F07DCF6A137E8A
+:10FC1000BFF02A933B178675A07FFBF47A99C0BD8D
+:10FC2000C795EBD3D7C13A9EDE2C3BE1DC407C8EFE
+:10FC3000C51194BECAFC647BD633B8A79B197FCB91
+:10FC40007BEEEE02E0DBA5944F99707E5A3E56E2C1
+:10FC500028473EF55C14E34B7A7EA5E753658D1B80
+:10FC600022CBA1650591E5D0D07AEE378D2C9F6B24
+:10FC70008885E9BBE3C978F06316570D9BD704F478
+:10FC8000FC20BB70D01E78F3D39F81DCADB4E23B87
+:10FC900065D5927D9DC0E88300FF9FEBDFF229ECE4
+:10FCA00087B2B951F80ED929580FD8476B13F01CF9
+:10FCB000BBC4578C7857E2794B9BB4F4AEF821EF74
+:10FCC000738BC4A5965F6531C4A5AA77F447946E7B
+:10FCD000693FF3DB041FB0CAA33FEADCFF7026E6EE
+:10FCE000ED38AEE55C3F586B45BA3EFAC8C5D54025
+:10FCF000B7F37E2810D0DB89D75D0FF2B0BA497018
+:10FD0000809FB8F487AC7D296D0FE33EFA73465FA0
+:10FD100094CE1DB00FAAD73FB11FEB6F141C00FF8C
+:10FD2000E88662D427CABC22C1F28D9D684750790B
+:10FD300085F1687BBC6212EC83EA55263BB86215FC
+:10FD40007A52E8B393BFA740CCCEB1B3683B67B457
+:10FD500003F9B29E2EC53942489E02FDD47819BDE2
+:10FD600075BE2A3B618BF44D9FEC1EBD427F22D0B5
+:10FD70005F6698FEF6ACCF33023D9EF60918679198
+:10FD800007F40BF4F9B2E29F2116B51ED5177DEAF0
+:10FD9000E9B007FDC1CB58E961FA54E8514F87C774
+:10FDA00025720F8CFBA1D551388FBCFA37EF59CE95
+:10FDB000F6199ECFE5D53F9204FBBA446271400A22
+:10FDC0005EAB241637D6635C4FD71907F5677CBA4C
+:10FDD00071CC8A0EC9EDF120B7A93E4A02B49FDF6B
+:10FDE0006C7E11E32BCFBFD27927EA376F513A00EF
+:10FDF000FC6FB69200DA213EE447E5AD22C66913F6
+:10FE00002990354B65BF2B713115BFB222BECBB7E0
+:10FE10009A7C85B47DF9EB27C6625CC20AA67F7B1B
+:10FE20005F11D83988B7632CDC3B2A97587C8E5EEB
+:10FE30002FF85D34B3C3BBDE8C99037A9BD0CCDE44
+:10FE4000172C6FB95736A9FCBBFBA265A51E9E9364
+:10FE500079E93AC3FB0A303EF5FB764A5C4ED7CBD4
+:10FE60008CFECADB64D4E7CA9BB75C8078CDF263B2
+:10FE700026B4776B9A2F1AC19ECDFBD5ABEC1DC46F
+:10FE8000365113A7D7233EAE590C9820AEABB50A16
+:10FE9000CF7168BE13F32D3C1EED6BC66F55FC6A27
+:10FEA000C7EB5E8AC28A6DBFB4E17B85ED9B6C783F
+:10FEB0005FAAF9ABE3557BC4C3B534F078B83B4EC9
+:10FEC00013E48F91E3E1CEC13F28217D16AD8D87EC
+:10FED00023CD8CBFD17166457A0F35A477BDFAE981
+:10FEE000F310CFDDB5F593E761DC955F5C7E1EE234
+:10FEF0006CA88268073DA5E695F731FE5569171F86
+:10FF0000C3EDA0977F89F1C317FE687202B40B3B63
+:10FF10004EA780FE7161CBDF92202E78D98EA9E8A2
+:10FF2000DF59B63D0FDFBDEDCD9E05FAF5F5237E19
+:10FF300059BF6E7B5AF7603CD079BAEEC027427148
+:10FF40008E2D552C7ED4C1E31B37478E17EF11CF72
+:10FF5000D83AEBAE29C01F5B999ED0675CE361BACB
+:10FF60009E37F4631D37F3F8D5963BBE32AEF13CB5
+:10FF7000FC83AED7B8186D7CE8A7AD8B7FF12C94CD
+:10FF8000B526F41AD718E807FE9478F4CFA35DD904
+:10FF90003189B0DEFF81F1A4B07E850EE0D79FA647
+:10FFA00080BFF88C1C44BF44708709EF6B96EF3814
+:10FFB0008AFBE9C2F64318EF4D785CF80512FAB1F6
+:10FFC000F85DEE03AAD96865F1907C1D205ED261D0
+:10FFD000C3EF3C2E92D1B5122FD95B9CE4B298347A
+:10FFE000FE3E0B8BE7ACDAF8018F3F0CAF9B30097C
+:10FFF000D6ABF32BE350153CD8010F13D571C0914C
+:020000021000EC
+:10000000E3524371C0BA7583F5043E1E8AF3A5F925
+:10001000A110EFE9138E468A2BBFB081C50F5F9008
+:1000200023DF8F56E2826B6274FBD6D7BF78E0BEC7
+:10003000E6F175F1343FC6A1A11B055F5D5723F3BF
+:10004000F72763846F64B785EE9B540AFAFB2C4F45
+:10005000C4C07D99D64E23BE93A2D8557CBE5DDC2C
+:10006000DFD6F58A8871A2F52D7B90BFEBF9473575
+:100070003F47D18F77231F6F751B931F5D5BAD3E8D
+:100080000B85D3B5FB4DA4EBEACD9D18A7BABF797C
+:100090009BB14375FE0CF2C3A71A7FD76BBBC62278
+:1000A0003FE7EFA2E9FBD9CAF9638D3F723F359B69
+:1000B0002F6AFAA9F0B618ED96BEFB3B27B9EE05FC
+:1000C00078E7DA991E75AE459CE68BD0FFCF626467
+:1000D0006E5737323F3895A3F83E9C95BD0727DA17
+:1000E000A2512F5B669D740CDE215D6635625CCC8F
+:1000F000CA3A1E47F3236732ACF74AEBED04C6BB9E
+:100100001AF0ABB2EF65BB9B803E27271765AACFDD
+:100110006194F11B0718884FBD8FADD306827D4ACD
+:1001200024EF5018C79D697F95402EB67B987F9F1E
+:100130005C3D3102BEB74BF67D09146E7BBEE00418
+:10014000D76C4FBA67F0437E0697F61D5DBC5347E8
+:10015000E777C969403DD16A08D86915628D6A4F51
+:100160004603D7411C52125EA5C07889C73CE611F0
+:10017000703FD446A8DA0AF59C92E65D95D849927C
+:10018000EE9D15727804A5570BA757C55F6765FFED
+:10019000A6703BF0FD96B80C5207E4BBD6EA467D4C
+:1001A000E2299B0BEF3FD2DF6888938827D14EF579
+:1001B000BB50B45FCD7D3BDAAF261FE7D2E613A676
+:1001C000492723C99B043E8E02D18278889B6AE02E
+:1001D000FAB2AB70645278DC7189C41980F23B2C9E
+:1001E000788F806E2FAF7A1E168B76DC747C1A3E69
+:1001F000119BD1E135B0716ABEDB8903DF47A7E30C
+:100200003DAE1BAF266FB5707E271109F89DC5DC8A
+:100210004E38FE2F69F0BD4A2A8A4F224C64C238FC
+:10022000E93021DE2596CF83F6AFA96F07EF01EB0A
+:100230005F0B870CB5ABEFB5DEC0E5E0114B518A23
+:1002400085EE93ACE1B518B89D9D2CB84E4EA065D7
+:10025000FE01C89FD296E7615C8AD0C8E86AC45A9A
+:1002600082FB664490C755AD8A463DD56426DEA81C
+:10027000F1703F8E78E5F1D08B8F9F3F395618286B
+:1002800028690DA535DACE1FCC352CA68BD00245BA
+:1002900014FE108B6B0CF45F3FC39D6C1807D31BCF
+:1002A00056BF7728EEDA6BC16368A81BBAFFC0148B
+:1002B0006421F82E08F10EDD0F72B851C953C60E35
+:1002C000EF06344687F22E33E5F78D692C7FF3DA9B
+:1002D000A1F5F07E4DA7BDE8660B8CC76CBF0ECFB5
+:1002E000C302F19AF7D57B932FCA38476F0CE4C14C
+:1002F000FBC7B707D9FBC523ADA17BFC288F3759B6
+:10030000947C00ED8BA2D643C8D7AA5A0E61B901DE
+:10031000F2341D9E10C81B42E779BF654C41F2B50F
+:10032000145E6B71323CC1B1D03266BFA4C1C3B898
+:10033000FABDD9613C482B6ED0E1E186AF85878557
+:100340006B6FA887F755FA3B6F4A170B005FD373A3
+:100350000CF88EDBC46316F4BFD05F14CA230E679B
+:10036000432FF7BC153B85C22957D397D24EA1AB7B
+:10037000DEE8269DD8AF63EF836AE9E7DF2DAE871D
+:1003800000DE328B2BDD9688F3C77705A6BB8B8BFF
+:10039000F213C2744D2CEE09F0AEFE11CB821F5A3F
+:1003A00054FEDAE9394BC5343ADE1F0123B8313C3B
+:1003B0009FC4E5DEA851749E892E03C6D51FB1B82F
+:1003C00057403BDB9C600062CB2612F704410CF7E0
+:1003D000A3EC8FFA1DCC8EAF2F36F856B0F360FC2D
+:1003E000BB1D61FAE8D0D14790D1475B27D247B512
+:1003F000BF93D1475B5D6E343F57033BBA9104C74F
+:10040000C1BA37590A0BA461946E6282F54037B2C3
+:10041000F7B682C228C4EB3A185F8FF5E1E352E6E3
+:10042000D5DBFA361E48FB7106D899070D781EA653
+:10043000E04DA9B7C3C2E246FFCDE67E11FAA99905
+:10044000D4B11F966FEB813F605C87EDE0CC5DD04F
+:10045000DE369BAE9023DC6FE3C115F84E78237F28
+:10046000D73B9604BD20D77BC707DB3F217C80DECE
+:100470009301F8E8C4FDF20ABF6796DD26B840CEC6
+:100480000F8F61EF90BC6E6176F5BB1691A74CAFF4
+:10049000493CB85B04FB2B7B9501EB27429AA19E5C
+:1004A000FF2A5E5FD2F8DD957555E88972D218781B
+:1004B000CFE4F978F71E2DFDC4C7A4A9E029ED1EED
+:1004C000F790A245945026EE5DF010C8554A3F3E85
+:1004D0004DBB317214E02D443F943E23AD0F6D7738
+:1004E00088AD6B7C0CE80B5BF62E15F15D8E7EAE55
+:1004F0006B16BC4749EB67C590DAADB47D562C4D01
+:10050000219FC0F303797E084BD33F741A04FA7D10
+:1005100003F7CB9EE5782592FDBA996320CFF4B816
+:10052000ECE418940BCABE856754E05C5BE2E7DB41
+:1005300069C13403AC9BB28FA5A02160A5422B4DAD
+:10054000721820CEE15D8FBB08CE0B7BE33BB75F1B
+:10055000CBEE81EABF7FCEC7F38DF5EBBFF4B82FAA
+:10056000FE39E0B7CADCF1F84C9AAFBEF632FA6950
+:1005700057C454DFFC55EF68E8C7FFEED5DFC40071
+:100580001DFA3F3345BC3F35CECAE8F180670EB651
+:10059000CBE2EF0492814A1CB22ACE15CAB85E861D
+:1005A0004B9986DF51CFBA055920ACA7578A87F6F9
+:1005B00031A978AE78AB2EAE55392FBB25C0FC8063
+:1005C00059B1BE42ECEFFA74F6F7493E63FA9299DC
+:1005D000FE0FCEA1A6F27333D731FB5E1087590907
+:1005E0008DF9083F3615FD5A3944FBFE41D640AF20
+:1005F0006480F2F454849767D695A713F45B916BEB
+:10060000AEC3F94D252AFD0CE546A313F8F1F4D14C
+:1006100094FEF9F7CBF4BFE126327F86CACEB8CD7F
+:10062000715F51BE466F69C477857EFBB9383F5212
+:10063000FCC563213C1715413C801E8FB90E6195A6
+:10064000D5D113DF7AFCE9F1ADE0518FB79C0F9D56
+:10065000F9F18E9EF8D1E3237C7EE95B0BEB3075DC
+:10066000B488F24BC17B4FFCB0F5FAEDB5B49E00F7
+:10067000F442F10DF84C1730BE272B86D34F6C3A5D
+:10068000E2370B14C001480F98D7E3558FC7AC046D
+:10069000DE3E81D5DF0FF81A89FC00ED2165DDB261
+:1006A000D26BF7C641DEC4E84CD1ABA772BC50BDDB
+:1006B0001AF5E6BC442BFA9B40AF9E9A14C65B5ECB
+:1006C000151B57DE48CB0B609FFE0AFCD1B1080614
+:1006D000DFC5BC95F05FE0563C5FCAE25905DFB765
+:1006E0007EA6D593A7FA0BCE82FE3DDCE45E6505BF
+:1006F0007F8C1087E77914FFC775F8D7B6B36BF313
+:100700007A7CFC0AFE31B927DE147AABB372FD7C29
+:1007100030190AFAF2D8373363817F137F7C44BFE4
+:10072000C4C4634521389C6E919E05E20E7DB7A737
+:100730007F0B3E76904A49151FBB5372AFB3DED88C
+:10074000938F29EB3585AFC714E2DD057EA62944DA
+:10075000FA4BC81E480DCFFF792BF7B30D2143602C
+:100760009E5F581C8CFFF37986E64DD54BE83F9B86
+:10077000F79F6DB6E0FD1B1294BA42784EC3F79313
+:10078000BCC6F8F0386465BD536A09D3E7E6E2FBFE
+:10079000D9142FE4CB98F038B6590509DF0FE2E3FE
+:1007A00038DF6CF6429CDBD392FB0D2BF83D848343
+:1007B00063717E526014C83F7DF9E5B6BDD5504ED9
+:1007C000EB95603D3EFE0A91F91F823B4CBE1752ED
+:1007D0007BD753E9F64639A1D07136DC7BBD01E801
+:1007E0003E28C2B8FDFC5C65E74576CFC145ECAB61
+:1007F000AEA7F0F65D62F702F228DB817A7AFAEDB5
+:100800008B4EF349701EB4D3D3AB22CF1BF8FD5BE4
+:10081000453FBB6875BF0FEBDEC0EFE3FA2F8EBA22
+:100820000ED6E71BD3D5612D5D29F444E9EB38F4EE
+:10083000D39DF9F13A50CBDFCBBC9C04F251D1E30C
+:10084000C3FA8AEB63A8D79B3E3FDCE6EEB27E8517
+:100850003EAFE8357DD92364AF4446D371CEE3EB98
+:1008600033D7DC2EB38BC6418CD36F8856DECB7367
+:1008700044833E39AF21ED95663857AC637EF90766
+:100880006B658D3DEC86DBBED89EBD673B7FB9B600
+:10089000FC238AEF41F1F8CEADD68E86FD91147E11
+:1008A000CFB767BF062FC8C97923A3317E4EDFAF0C
+:1008B0007E7EFA7EF5FD3570FBAAC1D838DAA9D262
+:1008C0004FEC3616477D69CD93CDF0145E6FF8730B
+:1008D0009B87B8D47F6FAEA3217A4EA4F7681478B3
+:1008E0000ABEE7C2CB98E00FA895FF1EE99DDD6C1C
+:1008F00037F313F4D6EF88603EEA8386A70322E835
+:10090000F5238204F5F0ECA0CBB050630F307BB937
+:10091000873D00EFA4D07C65EB2E660FB4D4A15DBB
+:100920005149ED0A903B1BE01D90C17C401968279E
+:1009300084EC5E88AFCA867732B95D0C4FA7A537C5
+:10094000B2FA331F4F37358C00BBD59D0C2F93CE99
+:10095000B45DFBA899DA57F5A9248A50FBAAC8769A
+:10096000ED77D64EA2DC3BDE25C0BBA434FFA865E4
+:1009700072FFEDEC99B6D18F82BF81DA67B7D95497
+:10098000766F6FFBE3669B03F1D9DBFEE8B417CD0E
+:1009900004388ADF82F221E407FE28BEFFA342F476
+:1009A000170B7853E8E5F6E50BD1CE88BAE66A0A6C
+:1009B000C49365733A70DBB85F3686C1A9896170EC
+:1009C000264A6E37F4D3BDFBEA28F03BBF3BFA045E
+:1009D000DA797E2BF3DB1FF49415A9E3DB6B6D0250
+:1009E000A797C010D87F77DCB82701EC956C59C069
+:1009F000F74EFDB2EFE9F199C09F66DB57D2296649
+:100A00004F36E2FD327F5460C8C32A3DCECFDF4D62
+:100A1000F55FDC3F441DFFDC6ECDABB531F822C085
+:100A2000CFCEDC7B0CF480DEE44E58AEB804902BC5
+:100A3000E4EAA1243C5F6ADD67039F68177FE7E073
+:100A40007CEB9EA40534ADDAF29F36B0E3EA383E83
+:100A5000CE4BEDF85E53E57611DF13A1FD263D0088
+:100A60007EEBD68559ECDE1FBBAFA6C8D5F19FEF54
+:100A70001952C49C8978FF4CD137A798BD3E189F66
+:100A8000BF8EFD1DCC29BAF7C96EE5EF93E9F5CF0E
+:100A9000676CB2E22FC3F8A96576D64F6FFB2BFBCC
+:100AA000B304E253EDBF6C2920C2F8B33F4BC2EF51
+:100AB000E70FA43D5508F63D919D2301AC44F6A2F5
+:100AC0007ECBCFA7E86F2FBC7BBE9367DE6EBD3CAD
+:100AD000EB66246E2AD704D0C7DC0398D391C907EC
+:100AE00045FFBBF533ADDF55AF072B7232D73F6EF5
+:100AF000D510027877CCC2FB1307248CF7D2EBC950
+:100B0000538305BDE8C34F207D6D6D4D8F017BFE86
+:100B1000DF609F00DDB65EC6F783AA49E01E78C796
+:100B2000A9BA55B40760FC24F37AD8678A3EA1E0DD
+:100B3000A5EDEA1EF358DA7FF645837D0505F176CB
+:100B4000F02F68574FF8FDC1049067FEA084E707B7
+:100B5000D917F7C62C54F145FF55037E7FFBEA6E8B
+:100B6000EDF760FCF5D06E8B81D9CB7BF7FF3D06AE
+:100B7000F8D4DB572F21BC903ED1536F46FD3BCFBD
+:100B80002A86FCD16ABD9988D98721DE6B6A2C152B
+:100B90006B42EFFA70CE87649595F4D42B42782798
+:100BA0002E09F0D0431F56F0ACD3333EB2713D77DF
+:100BB00018190FEF5EB65D4DA8C07BC7FE18FB0A83
+:100BC00094CF4C8FEADE7BEEC9E9F0FDA0C8DE9D34
+:100BD000B82AE27EDABDB36278876ADF524E8AEBCA
+:100BE0007665D0C50B6FD1FA57F64533FFBAE4BC32
+:100BF0005E7D4F225CDFC7F11518CCCEE9BC83E1E6
+:100C0000BDA86FACCF74F5B0F7FF61433D39580014
+:100C1000E262D4FA4E23ACFFBFD98A3E67FCA52519
+:100C200006F88B97E40E21B4DFB268920B7415AC12
+:100C30002376B033B61F3018605D3237A5625CCFC3
+:100C40002BFC1C73494BA3315545174BF839D81968
+:100C5000D99B12AFFABE3296F19733FBCA7F8171EE
+:100C60001D7F34919111F4D085B14CFE6E337AA77B
+:100C70006F867AC70D78DF68EFFE5FEF877793970F
+:100C80001C738C03BFE09458B60FDA0EBE520F717E
+:100C9000C16D1F82D4A2726663B168A0FDBE451CFF
+:100CA000CCAF7798FDBDD6903F94B812609E37C503
+:100CB00032BEFDD60183E6DCEC2DFEBEEFF5B18C35
+:100CC0000FA5C632BFDAD603B9090B70FFB947C406
+:100CD000821FF064473D6C45C50FA8E86F930F6F06
+:100CE0009D3E86FE737297C10ECBED38FC8208F3F1
+:100CF000759C21244E203DF4390A6FAC1ADE5B5DF1
+:100D00000C1E1DC76ED8AF0AFEA904FE7106CDBF2A
+:100D1000D52EC5433C98827F651E4AFF8E16E2DAC7
+:100D200060C1ADE4DAFA15FE68E5EF314CB013E5C9
+:100D3000EF33205D6EB7B96E89C5726F0AE4CFECF0
+:100D4000637AD2362E4F4972F170C09FB24EF3795A
+:100D5000AA8CA7B7FEEFE7E354D2AF4BD7AFC80ECC
+:100D60002FD2CD76164FEEF006CCE91077D6968EC0
+:100D70007F9F4A15977B3F8EFF8CF6FDC2B60E8390
+:100D800001EE8F55EF10E250DDEDA7BE1DA233A995
+:100D900005E9AFED18C17D5CDEFC5DE68FA4729FB6
+:100DA000BFEB86E7EBB07FF839FB2081A693FD1BF4
+:100DB000560E41FC066CB0AFC278A2FB06D2DA46F2
+:100DC00023D0EB92652C2DE5E7D54B9ADCB83F4B51
+:100DD000D6B378C465B1A94C3E737A2586E8C1F8CC
+:100DE000DEBA4D7B8FF01F5C7E9E6D7D6A0FF44BEB
+:100DF000E9EBFB808F9BDA9E5807C355E8F5EC467C
+:100E000019E194456BCFF33DB1CCCFB8FD30A3F7DA
+:100E1000C91BE55C784F6CB297D8C1BFFDD6C64DF3
+:100E200022F0EFB7809E53D93E07797B66DF6331AE
+:100E3000DF07F9D66920E047DF6624655B54FB6273
+:100E4000EF863734FBB7BCB96E3AFAEB3BE205E00C
+:100E5000F3CABE55F0BECDE8BC0DF7FF9DBAFD9FAD
+:100E6000CFDAB7C2BAD07A4FF1FDFFD434BAFFE976
+:100E7000A7B88D7102C0D9668CFCCEDC4BDF90FE2A
+:100E8000427CB5A3075F7D2996F91F6CE9B4FFEAA0
+:100E90003B2EA1FF21343E4E374FE52B74932A00A1
+:100EA000FE1BE90A8E007C51BC023D533D7AFECC0C
+:100EB0000CDC9507243CFFE1E74B3C2E0477946A59
+:100EC000BF86F999B26FDD6FC038B2F26B57829E60
+:100ED0009F50E845FA3C2BB887C753797616F671D0
+:100EE000047EB08EE3E38AECEEEB7DFFC140CF657C
+:100EF000D46284F990F5821DD6452977AC67EFBDA1
+:100F00001EE6F094EF87BF2DBE833DDE213DCCF081
+:100F10001D34425CEB281F936344C8C5FD400CB7E9
+:100F20000F867DB684CAAFFB55F2EBACDC8874AAA1
+:100F3000E0E123CEB7AEC4B1793FCEC7E9071F5D6C
+:100F4000A20AFF8224096C3F8B02DBE722C03FBB71
+:100F5000EFA6DB90DEEF884CEF76B0B7E2E1EF472B
+:100F60006D40FA8C9B66C77B2F4F49CEA8388D7E8B
+:100F7000E4C374EFA667D0CE03FA85FDDE1BFD97B0
+:100F800001FD930874EFA374AF5A3F850E285DFCF2
+:100F90001DF0A57CD7D385720EA9E0659BEE1C736E
+:100FA000AA9DE1E9FF00528D6EB5008000000000AF
+:100FB0001F8B08000000000000FFBD7D097C54D598
+:100FC000D5F87DF366C93233994C76B230490CA01E
+:100FD0002C0E4980B0D84E08204A88C352D7A0931F
+:100FE00000094B36109556948120068B18152DB6A6
+:100FF000208385EF431B6D10A858832610112D62A6
+:10100000DCB17FA54190454122A81FED87F53BE764
+:10101000DC7B33336F26026AFFE1C7EFE6DE77DF62
+:101020005DCE7ECF39F7C56ED3313684310763AEDE
+:10103000E6018C7D8F3FBFF4978C2DA1E77337CFEE
+:101040005E712482D1CFF7F0BFBA795E50BD76C70A
+:10105000AF571CE9E7AFCFC55F52E0FF71A66789C4
+:101060008C55F147AC4CEF89B525C0FB119DD66C72
+:1010700098B466E2196384039F781983F66F631C42
+:10108000543EAA6FDED32B1FCA31CCE985A6399B0B
+:1010900033158F99B105361BAD67F927D393DDB0B2
+:1010A000DE46C6C6E3BA9BC57C72DDD93685C699D5
+:1010B000E029738F898367664F9E7BA0FFF90766DF
+:1010C0004F966D88BF3EA170BEEA18404B8CC47E1F
+:1010D0006355980CE69FBFC9E4336532B6059FC4DB
+:1010E000C32ADBA37C9B32FDEFD9F4CCA5B73396A2
+:1010F0006BCBA475C1EA5AB1EE58686497C1BCDFE6
+:101100006696B59BE1D1D51DDEE281B08F2D46EF0D
+:10111000D489993898F31A1CFF9A629DED01586A98
+:10112000ACCBA63807D092695EB68FCF9397EDEC23
+:10113000CFB2A1EE70E6B92D8C8D12F862AD30C938
+:10114000703F1C42F1C6E1D9135E17207C86501710
+:101150007A7EE2D5A81B7D66FFF34401BF2F63783A
+:10116000F9ADC1D3DB660E1D27603E554966CCCA7A
+:101170003C4B555CFF2866DBE4F03F778C622E1C0D
+:101180007F9A1857B6CBFA8FA6AFAE10FA9A867828
+:10119000AD8EE822BAEA53D06974C0BC4C19DD8B1D
+:1011A000C1FA98EEDA5EAC80BAEA71BD0048552902
+:1011B000E0EBC7F6848D33D7239ED90113CBC90C3E
+:1011C000DD67B5CDC0E1B6D130FA66E897E065B825
+:1011D00003C08B83E38535DE8AF86BDC686288D7D1
+:1011E0006F6339DCAC53D96803F4B7427F24F7C688
+:1011F000A99E035741BD31D9E850609E13862EC287
+:10120000FB89ABA08DE8C3AD20BE4FBC3AE29ADFAC
+:1012100040BB77A28EE5C08B5B8DB005A4C3BFA792
+:10122000F9362948A72DC427F3C7B2C12678DEBEF8
+:101230006918D1D5ACE22C05E976CEE658059FDBDE
+:10124000C7D8742AF3EF63D84295E813F8A0DE16E6
+:10125000808F61DE3A15E1D53BCE936C8865EC1149
+:10126000DB35E323D281CE3259241BCCD843505FE7
+:1012700009706BB4BB14164BF506730AF121632396
+:1012800008AEAD0CF0D418D55D774560FF2C5E7FBD
+:10129000A4F1EA868634C69E897135229E3E30BB13
+:1012A0001FC1F98726D5A944E782AE7F80CE7E1282
+:1012B000BDD42E2C6287F3E0F70E660EA41B904778
+:1012C000B76E06F895E83D9B705D35BD8E3E8EC3CA
+:1012D000D5B67C65F484A17BB98E782117D8C78CEC
+:1012E000F011EFAE53CBCD7EB9B3C566174CED52BE
+:1012F000265BFCFC8672EB7933973B59509A229817
+:10130000D762C77E3EA223ACC7E4FAE5D1CA62DD4C
+:10131000785F183E7E0D89EB6794CFACE57FFFF2D6
+:101320009BA1D01F7F57899F5EE3FCC4E5F5A3C551
+:101330009F26223C9093F0BDDBC51CEB973ADFEA79
+:101340008B74B95F659BA03ED864F42A31B86DE612
+:10135000B0258AF1900D5B9456CB20A8FF4B612EEF
+:10136000C0C3E97FA954AEBFD73D3E13DEAFD9A1BC
+:10137000732E857E352D0AF183B337F345001D3773
+:101380004759073118AF70B7D96580F6D34A04C9F9
+:10139000659C00D76190EB2FE8CA6882E7F52DC005
+:1013A0007F503D5D08A8C6F5EA9D316C801FBE8365
+:1013B000DE7CB41FEC00DA1B9DC8674F45F2F19F3D
+:1013C0008ACCF081108352BEE788014A6159826E4F
+:1013D000F47AC662004F5078B11CB530DBA5073CEB
+:1013E0002B7AE63500BE4675B5AA089FAC2E878ECF
+:1013F00099FDF3E9BB18ED3B4BEFD03903F4D5D69B
+:10140000BDCFAB7A80EBD0318DF52A9489319E6FB8
+:1014100010DE2346D5D5637B5CB157F540FF7CA534
+:101420006EB705E9EC1AE644B92AF924AE93B5C1C2
+:101430007259EC814E9715DA471C77B50D80FDC7C0
+:10144000B89982E349FD0D7CC662910EE35DCA4402
+:101450001867E83F18C1478EB375EF6805F93EBEBF
+:10146000638CE218104AE76B98E3B738AE779FCEEB
+:1014700089F8753433D70694137FBA620CC24BF6E1
+:10148000EF1DCBF5CA488FA7084415EE2706E71DC8
+:101490007EA36FB701D6336C9677B7D111B09FD9C1
+:1014A0008CC64BEDF4D23E520E780AB1CCB6C6D201
+:1014B00038238EB7B60D807E4975B01F684FEF7820
+:1014C0004F41B8A6D7752888CFAD7B77D17AD33A6C
+:1014D000DA7929F8EB79611774DB03561DED23DB0C
+:1014E000CAF5CDF2535C6F66C77AB2AD09FE7D2CAA
+:1014F0002FF424D7C1F86BF66675EF17E5EE952843
+:10150000E403E4526EAC91C6B9CBEAE98FFBABBD04
+:10151000B1730FD2E0F37BDFB1127FB4C4137E133B
+:10152000F77D4AF8485C48BA98ADD9375F4179B140
+:10153000A61470A684C259CA8D35B87EA21F5BF46A
+:1015400024A0CF27ED9E82D8407BA5CC1E9D1520E0
+:1015500097E47B8F2F66EE19B09061EDE55B59162D
+:10156000C9F77EB101F27DC2C0FB22919E9A2C2E5A
+:1015700017B69F56D88D38CF335842FB33065E9747
+:10158000F07A40E0333B7652B6750887930DE8F861
+:101590009948DE4F2B8FEE8DD509BB83D30BEBE043
+:1015A000F482FB08B4BF66C6723C8C74798AF49CE2
+:1015B0004EA6E2FE8617F87623DD0E1BEFDD8DF4D6
+:1015C0009FCE049D8CE774A2A5F7DB63B97C1D71E7
+:1015D000BC8B21DCF315E60E67EF54C672BB29BE47
+:1015E0006334D10FF04319CE3734B54E35A0DC66E5
+:1015F000B609A87F7E13EBA07E7905AEDD486F3675
+:10160000979BF879BED9C6E92693D307BC3F271C20
+:101610003F6D433E1AE0E7A378A44773283DDE26DA
+:10162000E0F41B01DFD0F13D77E1F8F11D3A9702BC
+:10163000830C3B60F631E83A6C01E849E45306F468
+:101640000F0BB4CFB215229FA5563915C4EB02B3C8
+:10165000FB1EDCD772948DF948CF3A5F3DBC976C86
+:101660007311FE7EB49E6867116C68909DF5402CE6
+:10167000B7E35795A1BC7EFA5B23CA5387E4BFBD8D
+:10168000B9D1E501F4F1C7507C3F120EDF5A39A7FA
+:10169000C5B75F2E04CB3980D75A8E0F6EE7C77758
+:1016A0002C50B97C08966B3DE123443E083CFCC1BC
+:1016B000ECDA84EBCCC64540E91DCDFA617B4FFAEC
+:1016C000F8C558F34FB3672FAC8F5F8C4D08D5C763
+:1016D000BA88AED7158047758BEA50610BF58BEC55
+:1016E0002EC4FFFA66C58976E1EE1695E861FDF233
+:1016F00028D29B72BD5F6E8F19C4AE8452F03F6BCF
+:101700008F257D5A1B2BE65F06BFC0FCA76DBCBAB8
+:10171000DDE6793D500EAD6FF92612E1DC3F5971DF
+:101720001D41BB4AAB8F81851478DF84BF2908D760
+:10173000C10D2A32D6F59EAD2695F0F62E8E378C49
+:1017400075BE330AD6F5A7A6D1BA407BEBEC8EAFB7
+:101750006FDD05EBAF8DE6FAB9369AEBE7D3BBCE7A
+:10176000F7417ABB76E174927BC3F49E8F03E5DC8C
+:101770001BFD0E7339CC4A6D47FBE3D42EE5FB68A5
+:1017800000A135A29F1EED0A35CAA906DB15441C2F
+:10179000F539001F845F5B14C1AF3E07F82E93D666
+:1017A0007902D7D96E31B214683F0BFC88FDE4BAD8
+:1017B0007FC47ACF845F6F9AED68B4A00BD5BFBEAB
+:1017C0006EBC201E607CD5A2A77D9C66514EC4676E
+:1017D000B3D1C510FFDE83C23E1078AB113477BAA7
+:1017E00065C8010FEC6FFD813427BE7F7AC7D948E9
+:1017F0009D19ED478F6A877DA9E95D56D487BB5B4C
+:10180000CE5EDE3980E49BC10EEB3BBBEFB0DD3337
+:10181000E047EDCF6ABF88FDD5EACD0D817622AADB
+:101820005952941A3A525ADAFEA90C22FE63280F32
+:10183000BD19CC570FFB5E3E50D0D354E640BED707
+:10184000E27BBBCD9D610FE0DBCD36B703D785F3DF
+:10185000A4E6D23EB3B03EE8CDE979061DEE6F0CAA
+:1018600043BD29ED3DB94FB4C72373FDFB93F65E2D
+:10187000F7FE73CE0FDAC768DF83EC740E742CC5E5
+:10188000735A2D2885073203F7DF4A78A916FBAC77
+:101890008E30B7AAB02FB6CD70B253CA83ACD07D0C
+:1018A000009E86F37D380F7810CF7F373BEB114ECB
+:1018B000FA0E1BDAAFB0AF91B80F5650968C70F895
+:1018C000C0EC9A8CF2FE99258CE8FAF4B3CCF714AC
+:1018D0006C7A4BBB8EE86603BB82E8FF0ADD995B3E
+:1018E000DD66E2EBB1F87E7E47A30EE56F8ECFA1F9
+:1018F00043B97A7947B34E47F4E0192FE074560F95
+:10190000EBEBDF54A7FE48BA98149E2E42F0F6ABDC
+:1019100040BC49B88D12F4300AE18632B94B7FB22F
+:1019200033C20F37C00B4BB5878EC7586706C2A9A5
+:10193000EDC5637D3A61BC9A978FDD8A70A9F9ABDA
+:10194000898861CC5F2F8F41BAFFB230BC5D737262
+:10195000719D5B0FC478AB3D8BE47B15EB30A2BD72
+:101960000072DDAD0F90EBD28EDB67E828C6F1F791
+:101970000D51D91280F359E7B02416465FC8723F63
+:10198000DA6D39007FF455E1F9E4C5FC186E47DAE9
+:1019900083FC5AB2DCB778967B8CA1E7F1F60D8E0A
+:1019A000247F4EB1C61E7AC8CEED8DA7ED5CCF81E7
+:1019B0006076E13A4FFDC5E2F342D3A9DCF7AD0C06
+:1019C000E0746ADBBB795EA0A353ACE3F69790DFCB
+:1019D000BE36D3B9AE78F0FB794B2C7EFEBC8AFBC9
+:1019E00052D8552FBC697540FFE22DBBE3BD01F015
+:1019F000BB8AE9BFEEA6EB4C9C97EF8FE93BFB203F
+:101A00003ED84B27121D5016BFF86A3CA703383743
+:101A10000D45FF14E78F3F635380DD5DBCB0C63DCD
+:101A2000262FC01F732E92F902EBFA0E231E89ABEC
+:101A3000CF99A9FD76BB259EE44D2FD60BE54D8FA2
+:101A4000F0BA48786ADB253CF70D3E9181F6C597E0
+:101A50003DD8C507ECC17EAF37167BDC6372FCF561
+:101A6000BF7DA7DEE60EF35E8B18FFAC737812DA4B
+:101A70007DC5C6D6CBC2F9E1E439530BA737CE57A3
+:101A800046E3B87F39671A1F6E5DDBEDBA9FE63F0C
+:101A9000D807AB0AB00B4BF49E37EDDC5FB06A326F
+:101AA000D46B2E3F3B8ECED9925E84DCBB8A79DB31
+:101AB000907FB5F421F1FDBEC45B2A4B45BC3D6966
+:101AC0007770BA11FC20F9430B476D39C1C83CE16E
+:101AD000CE03CF75C3359279411EDEBEC1407AFE7A
+:101AE000CDF31F4ECD037A3FB6D6605B0A53CE5A74
+:101AF000B73BED51F4A70D36D914A81F73B45E8619
+:101B00007C5FB94E75233D1C5B7B7BE27428BF0074
+:101B1000FEAD8275546E3050FBAC0D7750FB09C1A1
+:101B2000D795EB12FAA3BC7CB3FD8144C4E3ACEFC0
+:101B3000EEBF1EF1B2C568EB3F18CAAA26C53D2606
+:101B400000DE73364606D5B7E8D82CDC87C42B53A5
+:101B50003CDDCF1DB01E63DC4FC4636B881FD518FE
+:101B6000C7EDCC9229B0EF9A2167C9BEDFBD278AA5
+:101B7000F4C92B6695ECC8D6C1FFF3B72BA15EF470
+:101B80009DDE49369EC0F358816786CE40A08F8A7D
+:101B9000085E2F7A514F766891452578B7825C1D93
+:101BA000434ADE651E0BFD7E21DF5347AD1E0EFD51
+:101BB000C6C61818EAA15FB4CE2966A0277F794E61
+:101BC000FF6967C07E4633971EEDE24266086A5F92
+:101BD00011657D0AED5A184C8FFAB02822F8F9D811
+:101BE000CBAE3D81F6C4585B70BBA4BF9C38A0BF90
+:101BF000FE7EB9B17BCFE78F4C807D56EC53C99EFA
+:101C0000BE905CDE8FFBCA417CBF51DA04EFBD2978
+:101C1000A0F3E6F963CB5290BE0A14867EAE63E76A
+:101C2000C3F3E55C419F8C019EFBF9F13CD139BBCC
+:101C3000BB8E6C7F5DC1BCEE3AAEFFE2E5D90FCB47
+:101C4000AB4E3BF76F68F587967FFE53FAA378F0AB
+:101C5000AB195E0B95FF85E5C92D5CFE6AE58556DF
+:101C60005FC87569D75B7D4E0DD213CF0979E2D776
+:101C700017467AFE339E8F6BE286849E8FC19E212B
+:101C8000787987EAE95C0E76D7EDD86F80D911575D
+:101C9000084B5A66CB8A46B9D664F1DC1917E0972F
+:101CA000EADFD4A843F9D1EDAF3104FB6DE4F9F5D7
+:101CB0009E38BEFFF2385E87F32B9DFB3744799246
+:101CC000F5386F2FA333307E25CBFB85FC9076AFA4
+:101CD000B477A59D2BED597D03B767B363DD417ED6
+:101CE00033D6AF5F903F18ED74E473EFAE28DAE7B8
+:101CF000678A7B10F26915733D1417A007EB0D7C02
+:101D0000FDDAF5BC1627EC13E6263B41B6CF1C1DC9
+:101D10005E9E6F8DD353FFC2C76FCA403BEEB3B612
+:101D20009B3350CE7EA6F1FFF6C40F0F0B7E7D5085
+:101D3000E89358E1277808F908EAC0EDAE2DF0FEE7
+:101D40008AC56EE2ABDF2EBE91CA47172FA4E78F7C
+:101D5000C565D2FCB6C277DCD900A7232B55D217B4
+:101D6000338DEE3EB1F0DE91081DF91B0ED799C7F9
+:101D70006F33633BA3F3E5CCC7276CF206F8011F72
+:101D8000C37D0CE9799FAF09BC5E2A9D56B34E2BEB
+:101D9000EAAD6E7A3D10A2B7DB112FA7596722F684
+:101DA000AB553AFA3429A1F33FC85CAF61BF662353
+:101DB000EB8F7CD31CC5F592B6DF9B027FABD09E28
+:101DC00085F233D45F61E4CC3B825E7B5B5DEFC424
+:101DD00091BC3393DD4EEB56294EF43ECE07E7B46B
+:101DE0000FF139C689D05F976DB575C755F879C7BA
+:101DF000FD715C187F5C4FFE1FED3AEE89E770D5F0
+:101E0000FA856429FD42C7C47E16C5D982FC44E820
+:101E10000F0FE70FBA3ADE48FBDB10D5E9C5B8A8CB
+:101E2000F7667E3E4F1AE555D0DF955ADC5888FE9E
+:101E3000B07FC6713FA67DBC2719CFF1BD928D4EF4
+:101E4000F4E35C2C3F0E6876F138814747EB58D3BA
+:101E5000E18DEC03EB4AECF0141AA134C426D2F85D
+:101E600049AC6E09E20DFA1130F2DBA37C8A3C74B6
+:101E700043973C214761A591C877DBAD1E533CBC1D
+:101E80003774465D3DFAED53AB783CE284E2E96D90
+:101E9000CF0E8D1BCB32395EF0AF88BBE66F34D0EE
+:101EA000BAF2373E46F1D1FC8D57EB950039941FBD
+:101EB0006FA0FE275E9DD39BFC181F858FBF0E88E9
+:101EC000E7F462461FE1108A8786A5BF7EF13F31A5
+:101ED000AEDC09F650B03CEF173F24206FA1FA0C9E
+:101EE000C9737D3CD7237FC07C0558D31F66C87C4F
+:101EF000850DE48FDD6A6CBE06E351DE1A1D43BC1E
+:101F0000B7EFF92BC56B67CD7050BCB6FBFD7DCF2D
+:101F10002CC7F63FCC628311FE29BE8715F4CF7C17
+:101F20001BC9E3C9DF6E32B125B0A5D96F37533C69
+:101F3000784D958EA17CD1EE1B6632E8785CDBA0F3
+:101F40002BE0F8473928F10E0464447C48BC21FC9E
+:101F5000B698316EFC02AD5FAECB807EF004DCC77C
+:101F6000966B904E7A55D915F417C8755D489F4CFD
+:101F70008AFF69FAE467D4C3B7C55F9C1E9E81746B
+:101F8000AED5C35AFDDB64715562BF0BE9E1134264
+:101F9000FE4D89D7C443307E16066FC7841C0CF0F3
+:101FA0008FDF19FF23FCE31FA11C09E31F7FC6C8B5
+:101FB000E56FA39DDD36290CBFBC27E6D7ADEE3219
+:101FC000A2FE8C6F51C2CAB36CAB51C61357E0FA74
+:101FD00064FC442B8FC3C0B711FB5FDED4BA0B7B0C
+:101FE000E5C65E168DE6DB15DFC3B937CC3C6B0466
+:101FF0009F3B16308AA33AEA18C92BA8FBB893B0C6
+:1020000095F223001F4FE0B8178A639DB615921D05
+:1020100024E35686D8E0F3F89E78D9CFF547C46F0D
+:102020007A0F7AE24F625DB0FF67B05FFC02161470
+:102030009F917199F83AAF62CC4775C4C8DFDA3B1B
+:10204000CEB304F33FBA8633E753508F29B515A2B8
+:102050003CB5CF72B661FC66F929EE9F5F3E8FF901
+:10206000962A0179059E2CCA0342BC05FA07760A16
+:10207000F9B653AC1BF4E45FE3F9BA5AE203F4A4F3
+:10208000C4876E75AB4A78ED0AAFA702F0DAFE435B
+:1020900078FD19F9F29D8BE4CB0F2F856EFE7191BF
+:1020A00074F34B8C6F0C093BDF678857ED7C4067FE
+:1020B0004783F8BE073ADB7889F1D2F9E69FA8A7F3
+:1020C00042E1FA5D7C42285C5716EBFA91BC6651FE
+:1020D000CE707AD59660FE4FE791D812865C7A1E54
+:1020E000C9FA7B3B8D8867190791EBD5E68FC8F657
+:1020F0009A16250FCF9F85BBCFD339E074DBBFE89D
+:102100001C109A07C2E79D0FE48DFC39561DD0DCE8
+:102110000AFC77A6C948277595397E370AFDF77BF3
+:102120000DCCE7A0FE11D8FF0AC6FB5FD1B4BC03FB
+:10213000FD575730BD579C4795EFB91D15837C7CE3
+:10214000C55E95F2BFD866FEBC8E452C41FF744C2F
+:10215000818E3902E019EB8A628E0078C68DB7074E
+:10216000D5E53979AE9837C1DD2BE8FDA41BB382E4
+:10217000FAA778AE087A9E3A2B37A89E5E3722A837
+:102180007FEF85A383EA99DE6B83FA67374C0EAA4B
+:10219000E734DE1CD4FF18AB7B7C14ECB33FFA5B56
+:1021A000003FCCEBEAB80CD63B43ACB7EF9AF2A0B9
+:1021B000F781FD5A311E385390C917CF8DDFAB0020
+:1021C0001C6708FFCEE5BE3941E3CF55AB887E677B
+:1021D000361A8E04FA69F4AC6B4F2AC0B9C6A73818
+:1021E0005BA15EB926F8F9EC1D1BE8BDD9BEE0F68F
+:1021F000B99B83EB83DE9CD29FE701B929BF72466E
+:1022000042B0DF8785D08999E4F499B5DCFFA57ADF
+:10221000FB6AE824185FEC27D28D43D08D293998CA
+:102220006E221DC17453F9FAD6A108072DFCA3FB39
+:1022300069E8C90BFF7E00FE1667307D69E14EFB41
+:10224000837556EC50D8EF9550B8CF6A7978792AD3
+:102250000B853B633E23D71FC1ED8F68E0FD81D91D
+:10226000F318CA89B33B16A8188763E3793CFFECDF
+:102270008EAF07ED7384892FE584C497D62504F8C3
+:102280007F647CE934C619AF64171167DCFD4F84A5
+:1022900007C8008F01F3110B9C11DD71C5487F3C0D
+:1022A000492B3F6509FAE3B904D22BFE786C3DBC9B
+:1022B0003D34E60337AE53C6E564BE8ECC2B0A939D
+:1022C0009FFC978404CC0FB447E3F9754BFB7C3A31
+:1022D00077C9BC2226F202C3D8FFA44F9AF1D714C3
+:1022E000B20B762670BDFE0A8ED76D1788BC2FA95B
+:1022F000D77B1A47C6DF7A2A955D2AC513BB942877
+:10230000E75361F4CA47093F51BF85E68F7F14A8A0
+:10231000476AEE38BB07F50BC0FD636CB758406FDA
+:102320002B7EBDFDBB682BD16BD7EBAAAF2F349CA6
+:102330008970C4D8018E2D22DFAF45E4FBC9F5D6E4
+:1023400045A4BAF479D81E9CFF27E38ADAFD8DC232
+:10235000FE71FE3ABC1764972CCFE576DB690187E6
+:102360000D166E271813B99D50AB391FD53670FB6B
+:102370000CA4D7AC9680718C8916EADFDF5C684CC0
+:10238000C47184DF6579A64276C57245217BE47706
+:10239000B6D1F4FCCF09858644E8FF6F31AF1160F8
+:1023A000886563165F8F439317FE92E8FF52C268F9
+:1023B0002A8D8936E17FB65D81F4916A7619A95D2F
+:1023C0000D1FA78A4EE4FB1A29F264B47180714292
+:1023D0006EA2DFDFC4EDD2E2B18941FEFEF78CF1DF
+:1023E000C2DFAFD0EB2E9453BF1478EFC9FFEFEAF2
+:1023F000676B47F1ADF5FFAF8CE4FE7F191F08F165
+:10240000FF3BC785F5FF231EA2ED7EFEE993D82D85
+:102410009FD2503EED307AEAF1FCD5B51DEC7868DC
+:10242000EEE7EBA4B8C0C07DD94E3C672DCF64BBAE
+:102430002C486F4B18433B7F47A76E69243C5FE9EC
+:1024400065367C3E7C2D3FBF55AE7138719B520E78
+:102450005C9DC8FD8706381F5B72F1BDC96D1827EA
+:10246000583995D9510D35B2C6222BDA456B59D85A
+:10247000F3E368414F130A7751FE764217CFB70F47
+:10248000EDA793767E21E2735897E72C8FCF717971
+:10249000422211CFA9ED3A5FB8737DB2ADE86AA4CC
+:1024A000AF81BEF0E78891C24FE632BB27E2F80366
+:1024B000B7F17CD84A297F67E8981EF03E45E07561
+:1024C000CA5A9ED7C1CE7FFFBD2AED4546E333945D
+:1024D0002B95532D3EF41355B6647A695D6EC599FC
+:1024E00083F2A2E56D37D62BF3F36DE89770FD9D6F
+:1024F0002947FB91A9C9B8FCD2B3A3529E901E8F65
+:10250000A738D464416F23F1B09C40727E6534C01B
+:10251000BB72ED925D98D7F3FE1F19C59B0EA85DA7
+:102520004371B05F017016E662A967A5E4B748A6DB
+:1025300071A68A71BCFF827923FCF3FEAAE575DAE5
+:10254000CF0103F346001D9DDE798303EDEEE5091F
+:1025500011E4CF9371DA83AAE73E5242FAAE1A5CD5
+:10256000DA4D2DD136F4839CDEF9613AC64D3EB981
+:10257000E7AC05EDD87FE8BB2C982F7C7CD1BB164F
+:1025800017C0F193452AE59DDD2AF48684FB7D89F9
+:102590001CEE1F27BA1721DC6F5BFCDDD0C03C2A84
+:1025A000B63081E879B64FA5905CB79CDD1C8D16DE
+:1025B0004A77BDBA392EA82EF540B589D5853BBFDF
+:1025C000BC24E86976D30663AA03E7F7AC42FA387D
+:1025D000AEE774747C9BC5E7CDF4AFA7BC69B011BE
+:1025E000ED837FB498582BEA337D8781E749BB8A16
+:1025F00015A00B8FC0BF769D7B5E8EA6F1663EC692
+:10260000E54719CCB510E0EB69994D7241BB8F9944
+:102610009F38C625015C67AE5018FAE3B0FF22C0B0
+:102620009F67E1FD5FA1FDA5DD679937580E48F969
+:102630005529F03CBD21F87965CB6F699C19CC43D5
+:1026400079206027699E5F730CF50AD84741ED67D2
+:10265000F6669B518F6F4914F1EDA16CD8F7F0FE2F
+:10266000AE88EC184F187E92E5C9C53622D6CF1732
+:102670004750797C31A3725122A7E3AA96B7EF4461
+:102680007BA966C716238E73C9F1819613D69B99D1
+:102690005FEF96E83DAF211ED92C25284E50B3E1BF
+:1026A000AC91EC32019F52D15E8AF0003CDCC21C3E
+:1026B000ABF13C505A65F0C7E9E0FF5B72BFC36005
+:1026C000BF80DAD1913917B55FB94FB96FF9BC5AEC
+:1026D000057A0CF3BEE48345421FCDD83869792FC3
+:1026E0000051FDCE63199DFCBC49F67891C06B5139
+:1026F000C4FD648F1785D8E3EC3DDCB7A4C74AE678
+:10270000243DA2A53B4907CC6CA0F72384BDDE4D38
+:102710006F2D0F125C243DCC5C5D68E4E69BC7C85E
+:10272000ED4A6FB2F0D726A3BF16E830C83E06BA0E
+:102730000BAA6BEDF12F0D9D19281FB476B8CCE7CD
+:10274000D4C2E76022CF5F9AE1708DB30DC0738071
+:102750007B39F985F146CA10E4DBC63D7723DF6E8D
+:10276000E47CF30F410FB3923C1149F0DCB3F49ACF
+:102770001AC47FE7125306F2B367698A1A0FFD3D48
+:10278000AB1492C3A397A61811CED3970D1E877CC6
+:102790009DCB5C34FEB43816D66E189CC4E54779E0
+:1027A0009D811963082946F40B9F6A50C82F8C9AA3
+:1027B0006422E06B96C057F58AB7ADA4AF1CF06FEA
+:1027C000285E1FE03FB3EA2A091F70EE08CBC7520C
+:1027D000AF54B166630A8C3B67651BD1319C47825D
+:1027E000FAD7B29584AFEA664D7BDDD5843FD8B980
+:1027F00011CF89B53B829FF74F127682933991BEF4
+:102800003D775A2230AF71B4804FD94AC586726B7A
+:10281000FAB2B6841BA03E7DAFEA84ED74C387850F
+:10282000FA23281FEDCCDE1CF2579C713892B09F22
+:10283000C7CAED5245EF1986EDD3E23CC3D0CFD8DD
+:10284000F59185617EDFA1732A73E411950FA2FCD7
+:102850002A1B1B3429C0BE2F33D812311EE965F361
+:1028600093C53DB88840F8D446AC247EA8457E8800
+:10287000F0F3C3348C7BA1DDF3A24279846C473042
+:10288000BD9F703426C29190B9EF33909C2E6F8A11
+:10289000A5F371F9B22223EAD5F26DB1641FC1F933
+:1028A000F4BDCB86FAF1796859DE9E6418B7BC395D
+:1028B000D3A906E331F4DC19B0CE390D8724FE8E9E
+:1028C000F480BF23E1F007780B6A2F4F127249E0C2
+:1028D0008D2D8A23BD5A3AEFD59C0858D799BA480E
+:1028E000CA93ECE97CC4668CA0FC03E9BF1ADFAB99
+:1028F000DBCF44793E67570E21FC69F136FEDFD30A
+:1029000087A1BDCBFE6E6168674DCB66B74D86F67D
+:10291000DB14CE6FD3EAAF198F76C4DD495C9EBD60
+:102920000572D0D597B1B7410EBA400EBE0BF21169
+:10293000EBEF2F4EA6FA878B1D547EB4B81F954738
+:1029400084BF5FF21D1002D1ED92242E179724C987
+:10295000F8FA82643469C6FFFBDD213A1BDE676C3E
+:102960009B30369DB1EB5CC1FAF7C6A9C1FAB5D36D
+:10297000601B978CE7DB150AD9A3E5EE9141FDE1D9
+:10298000DC64C47B2BAC5F9EBF9DF486C33819E822
+:10299000F1A6E2B8A0FED737A406D59F4872D0FAB8
+:1029A000268DCF0E6ABFB9B47F50BDEC9C9131A487
+:1029B000774701F1CF0291670407778E171BEFFB72
+:1029C00075DDB0A4BB60BD5FEF33D0732D3E245ED8
+:1029D00067AC519907C69BBE06E41F2CF148E3740F
+:1029E000E2AF2F0E58E85CB2BC296F7F01D40F35DF
+:1029F00019280FE8D0B2B85568AF1D6A4AB032281E
+:102A00003DCB5561D7D88C2C40DE152D5B42F9A605
+:102A1000653E9393EC9776EF93B2EEC0F32A2E12B5
+:102A2000F9E43DD5D7AA10FE5C04DF6722E95EE138
+:102A300071B027F12AE1F44EBEAEE30A5B86F513CE
+:102A4000911FF7B90BD6716A6263850EFD15EABE58
+:102A500004929FCFAB0CE9B6749E81F20C66BFAFB7
+:102A60006EC03A53725339BE55CAA366CF98687C7C
+:102A7000D6051402FD163C6D7AEA01AEFF787DFBA7
+:102A800040DF03823E918E8EC732572C2D56A1F522
+:102A90007EFE76C2067CEE87A76F10EE7BBDC1FD81
+:102AA0006612E0EFF30ADF20926F8B1288AFB470EA
+:102AB0003F62E4F2CB8B7CA0F8E5A69FCF96927E96
+:102AC000986E70263A496EE5A7A0DC3AB2D24076FD
+:102AD00030D3BBAC93488F3E4F742CE739A2778C30
+:102AE000C3F51D69C864985F51BE52A5F30AD21F91
+:102AF000EFEFE3E7D487550FD824CCDBA07858520A
+:102B000028DDDC3E6F18E55D6AED6D597E09BCEA93
+:102B100009B04BE6ECE479812CBF533F7560E03E91
+:102B200096F1F93C0541F94A5559AF1D34EBC82ED1
+:102B30008CC173C289F754A2B313598D4393019F7B
+:102B40002775BB86DE05F52F267A8FEAA13E22DAAD
+:102B5000F32F84EB5CDDCA0C250BF3FA0FAF1A09D7
+:102B6000EF7DFEACC1496C2EECFC39CFCCEEFD43C1
+:102B7000F615D81BBDB8DDE14AC1FBCF731DCD1AD8
+:102B80007B80C3C78149200017DB6A056D377678E3
+:102B900088E5013C574FD7314FE079E0B0C8E3B149
+:102BA00024F373A8B41BA6247339335DC7E99BBD16
+:102BB000AC707A03FB2A500F48B93D17F3AA55BFF2
+:102BC0001E9072BB8A3552FE8A2399DB2FB3151FE4
+:102BD000D9DD35988902FD2B6C3C6856B5D9E4F3F4
+:102BE00065D298B640FB607A329727738CCF3E8EC1
+:102BF000E45BC93AF83E35FD3E37F82A3A3243F5F0
+:102C00004F856DC3323B8D6F70A29FB752F06B75CD
+:102C1000A3E26B253B85EB51E9579D29F4A8563F6C
+:102C200085E8258D3E9AA9D1BBAC3158CFC27AE94F
+:102C3000DEB25CAF769DEE680BC1610EAC0BF56F3A
+:102C400085C7B7A784D6AD3801A321EBA964EE31BF
+:102C5000B1B80F78DEEA085D9F765F21EB15FBD4F3
+:102C6000AEBBC2F9552BE6BB543529042FED3E24EB
+:102C70003EB4769CC44B8597C3B7A245217C7ED6D3
+:102C80006D1F32F26F4BBA61CDF02FE07D4947B036
+:102C9000AF12946F95AB411E6786D2D31CD66C459C
+:102CA000BAA961ADCB5390DF5A9BAF1F8E7E86B51C
+:102CB0006FD3F9A9D4DE9AA38B05507A73578EBFD0
+:102CC000CA4FE7178A27FC5CF0C3DDE9A59F1EE029
+:102CD0003573A3EA8A1C14D44FE43F7A098EB3BC3F
+:102CE0005E23FA6367093FE585D659ABE7F75F2EA8
+:102CF000B85E01CF9F7BDD0F27F76477853F17769E
+:102D0000DB5B1A3DFFB181FB5BA57CFE5AEF22FF26
+:102D10002EB40B3BACCEC6E37D1AB99E9E4F72BD5E
+:102D200042E87939CFD1355B295E3013ED8080F6EA
+:102D3000CF566FA578A5F1D99956B4CB8FAE99BE71
+:102D40000AF3528F364D27BD5FF97BA9F73DC64088
+:102D50007BA2684DD9FA7B908E3747525CB1A2DDD9
+:102D600023CE452067A19F630D97AB6C3597B39534
+:102D7000A81F07907EEC8BFDEEACF0F4457E086852
+:102D800027BD79E774CF9F77C2B877FE29DAE925A6
+:102D900050D85A7564CFDB5A513F56CFFFF020DE32
+:102DA000D3017BE0FD5F4B7B00AA45064F5B32EA17
+:102DB00021610754AB1B326C683708BDF11F807F5F
+:102DC0004478F8E712FCCB11FE01F1DB4F1B389C75
+:102DD000A76BE07F7825C7CBF2A66C2B9E2F3F6DAB
+:102DE000C826BBEBD3A61C82FF8C0700FEDC5F1F4E
+:102DF0006C773500FCF17C81F087F596B73B04FCDD
+:102E00009D1CFE0D1CEE6C252F6784C0D94BF95715
+:102E100077FED1E4443BE278642BD957C7B7A8AC1E
+:102E20003EC02E9376D137ACF149B4DF24FC67F76E
+:102E3000E91884F2A7F4E1D7AC8887D95B785031E0
+:102E400004FECC9544F1C7EEF9BBEDA86F115FDD30
+:102E500076D445E2A986B919E9C796D70EE039427A
+:102E60007171BF458DBC6FB623F8BE19E69295DA35
+:102E7000D1C5E28C88C0F5A469EFD37918C6BDBE70
+:102E8000CDF9EAD6F9C4E75D4179B925ACD580FE24
+:102E900036D6ACD03DEDEA0585D6428671B53A5AB4
+:102EA00087334509CACBAE5675644F5619457C44E5
+:102EB000E45524897E4929DC2F909C62A3F2742476
+:102EC000237D70DA62F4E17D2A385F25E3FCDE9D24
+:102ED00026C2DB415C13C05F350A3F33A842A4B76A
+:102EE0005B18A7D35BCC7B29AE07279775A81FA7D4
+:102EF0002D3439C9CE8D8FA1F8D2CD42DEDD625E90
+:102F0000EE463D31CD6C746109E37A31F9D7301A60
+:102F1000A687F90DBD8C74EFB034A2F3593C12DFD3
+:102F2000967CF88E0858EA95608EA31F187EDDF611
+:102F30007D5C285EFCF809F64BD74685F78B0C17AD
+:102F400070505C2EF23F9B60EC2858C7A814076FA6
+:102F500077D8B83F7A2DE0C9E2C7AFB69D7979FC42
+:102F6000B20AF3B1F9F758BC241F545D50BDCAC86A
+:102F70009F4F796243F1EA34C6DE618E8188B72AB9
+:102F8000942178EE2F8BF1617CEF3AF487DBB1D49A
+:102F900013BD4CD633AF8E970D663B0EC7FDE325B0
+:102FA000029EBF2A60AD3100F7D6D783FDF337B458
+:102FB000EA5AFB027CAFD3B7B6217DEA221C061B7E
+:102FC000CCE31EAFE4E239A56AE9C5ADB7E289A654
+:102FD000E2D5A3A0AEE3F9AC5DBFE6FE895B805904
+:102FE000116EB7EA59BB9ACBE900E1526B7778A929
+:102FF000DF3C85E237322E20F13F18860FC4E32DE7
+:10300000627D304E8315DF3786C7D77C812FCC8C0D
+:1030100046B8CF157C3757F25B5330BF3D827804FA
+:103020003E55D02E06B8DD22CA9EF8E2A1146E47A6
+:103030003F94C2CFEFF75CE27CCCDC95417979829A
+:103040005FAA4D7C7C39FF75A27C30C54EE3CBF581
+:1030500000BD7E8AE3E8400220BD1E69AC27FB6804
+:10306000160B88C365FAFB49BA0EAD77CB11DDF7B5
+:10307000581ABB6620E8955F443A518EDE626CCEEA
+:10308000A93387F69371E652D661A0EF03493F99C1
+:10309000D03F635533E535952AFC1EF4E9428B5742
+:1030A0000776E2C722BE7B06EC469CA73456A1FCFD
+:1030B000AF69317796205F975A8D7A2C3F16F1DFF2
+:1030C0005B59178DFF892D2BE60686DF4D5031E6C3
+:1030D000070BF8A4D805FBAD47F9C3EB2B5D69E4FA
+:1030E0008D12F54FF7615C66EA79A003AA1F2E7670
+:1030F000C1BCA75F15CFD991627C7EFA3E41CFDE7D
+:10310000E334DEE9C7E4F353FCF90AF9FC2B5E7FF4
+:10311000508E2FEA0F6B9E2FD13C7F82D75B9FF89A
+:10312000AAD88BF6EB684EDAA523149257462137BE
+:103130004A97B6129C4B75BB78399AB5EAF22FDCE8
+:10314000EF648ADB989280F7CE8F58500FFF33D50B
+:10315000654C817E9F2679FE86E59C498AD78872D8
+:10316000F73D1FE985921EF2278D42AE9FEAE5A644
+:10317000F7A51E8371DEC3F12F759CBB43C7F9E42D
+:10318000C78C734D6AC838477FCCBEFE9CCAE12409
+:10319000C791765171BA4BE985FC3A666490BF706D
+:1031A000EEBDCE18F44B31CC7703D0CF5DDA9C91D5
+:1031B00007E3CF7DEEC58C0AB49B84BEAF39A7323E
+:1031C00017C8A3DA730A955FB47D64C47BB335DB9B
+:1031D000DA8CE3A05F2D944501EBAA12EB047DA7E6
+:1031E0009F1CA0A78DBD74426E3CCCF3329E3BA1C8
+:1031F000477CCED5351FFD3DEAEF114AD8F8F2974E
+:10320000627F077BB81F61EEC5E551616F5734EEF1
+:10321000F314063960FCA2FAF0F902BF12EB28158C
+:10322000FA6FFA504B8403E03CE43D1E5FAF589BBD
+:10323000998BFE6263F2E804825B8F7ED62EEE6786
+:103240006DE17ED6527BC702FC4E99BB57EC83F8EA
+:10325000DDB209BF937C062C0BEF8E37C97ABF898C
+:103260006346713F18D6F37E9FF920F2CDDE286EBB
+:10327000CF4E1B36300AE5436766B4CE06FCAC4F32
+:103280002A73F74AC0F6ABC6617BA1C9D2A78CE00E
+:10329000CB882EF449EEFEB84EEC8FFE118FB1357F
+:1032A000E106D887E70D95EE037806457BC2C5CBCE
+:1032B0002FEFC5E5B9BB978DE0B15707EBCCF5AF64
+:1032C00043CE0F76FD820E18EFC8D294C10F38306E
+:1032D0001E53785DAF04FFFCB3923CA302E73FA20C
+:1032E000637DF06871B1EB182EF0711DC2064AF7CC
+:1032F00028A0B780F3DEE431D141F5A9C571CC1522
+:10330000E8BF9D9A1A54BFB1343BA8FFCD33FA07EA
+:103310003D9F68EAC8AF0BB0677BB697BC049F5A65
+:103320008B250AEDBA4F5ABEF9E016B40337AA4E00
+:10333000B45967EFDCF4C148E87506F01B477E49D5
+:1033400007F9D13E9779747A973E307E748A75502A
+:10335000BEA23CD75E6CDC68AEAD9DF2097FAE7854
+:10336000D1BC5EE2FC9BCB72513F9EA97B9FFC7956
+:103370003566BECF532F1EE2DF2D44BD02747F356C
+:10338000BE88F6E23910FCC0FF453B0E519CCD864D
+:10339000C14DB4F7D3E6E9F1FE642D94A85FC68170
+:1033A000DC8A01BAE9686303B761DE48A685DBE51C
+:1033B000E7A690BF7C6F14F7FBEC4D8CA5EF48CCD3
+:1033C0006DB886DA6BCE45D3F86FA91DE3282FFAC6
+:1033D0000585E2131353A72DC5FDEC8DF20EB81D24
+:1033E000E69DF8E7ABC723DC6AB6F17B0213D5771D
+:1033F000F2E74159D5780DBD3F51657B15B01F628D
+:10340000CEDD42E34E441B00EAEA50CB03A89755B9
+:10341000636B9F3FA0BC315A48DED49E8BA4F72635
+:103420001471FDFD7B214F0C9D7C5D63CF4DA2E7A8
+:10343000922E7CBDB282F2F70D091BF5F8BD214337
+:10344000A742FDAF3DD79F4AB9DF37FAFD91BE2FA6
+:103450006048F87A1CE68DBE11AFD8C82CD1C8E3FD
+:10346000B375C362581879D53DCF399E6F6C3AC792
+:10347000F38FFF3BCDF517E4C392459D7A8C17314E
+:1034800073840DE1555230D85111C067EAAE9B8C60
+:10349000881FC3EAB78DA8AF4D5016053CAF16F98B
+:1034A000585A79DD22E483FC8E9BD43F2C7906D1D7
+:1034B000E7AD3641A0828F9E167C2CDFEFA0330E45
+:1034C000E0713BF7F3B7A679DE4239D151C86E7C83
+:1034D0009EE4674706C6697EAEF5039E2314B21BC1
+:1034E0003B29AFBEA4C0A1C3F8C07BDD7A87F3F34C
+:1034F00085F6D126F6FD96CA16E2B86FFDF2971D45
+:103500002E18AFEDEEBC3CD40B72DECF7AF17B0B04
+:10351000CCD6751ECF87B52F473B90EF27E2E10C45
+:10352000E3A23B4D746E81768A77D4BE6C7A0AEF43
+:10353000BBD55AE1FC0AF317BD12D98A74DCF64AEE
+:10354000A41EF5C71DBD3D9F217C8A5EE93B06CFC9
+:103550008BAE16939E91FDE33A4AF2B687F55E482C
+:103560007E69E94CF2A7A781F34B99A0D372C17F82
+:103570001EC14767EB92880FCF2E8245633C759141
+:1035800032701BDA0B0E0B7D974EF2E5443C1F4167
+:10359000FBC4FEB1748FA1EA5C6C101F569FCB1464
+:1035A000FC1D47ED92DFCA059F98847D3143D0B55D
+:1035B000B45B243FB2744F622AEC63623DF0BD9568
+:1035C000E2FEF9C84F7EBA31DA90BE806E922B02CD
+:1035D000F8A7BEED2686768A29DE4D743303CA40ED
+:1035E0003B6566B79D621B9708EB2F5996A9C37B75
+:1035F0009BF2796AEAA5D17F44AAC82730B7E6A032
+:103600005D6BA88B74E27D9A33F13C1E347F058795
+:10361000E37C83BB08ED8CF94F28E43F43FB03E5D3
+:10362000D2D00375C640BFCA4DE706513C7DCAB92A
+:10363000CBA834267B2E4738949DBB5EE06BD08FA1
+:103640008A3F0E7171BF92C167726EC844BF9247C4
+:10365000453C1F4F67B64703E37D6B54F28FC9B8F3
+:10366000A4F43399F0DE4F803EFD46DF9841DFA39E
+:10367000D1FA9D0AB9FE3FB9D140FABFAAED9DA18A
+:103680003A78FE79A62B09F5C97A83A708F733673C
+:10369000B2EF3903D4E73EB8D53ADCE18767B3BE71
+:1036A0003507F56933C011FD5FCD2BD5F13E6EF7BF
+:1036B00044F3381AA76F49CF5A3A9F732E9BE07391
+:1036C000B6CE447AE82CD02D0BD04352EF48392F98
+:1036D000F58FA4EB6A3D975FD5E618CA23F3EB9DFF
+:1036E00049EE42A4BB7E3C1FD0AF779E5A3502F90B
+:1036F000E0743CE55D4BBD21F9E085C5C9944724E4
+:10370000F592E40329CFA57C97742FF5D6E83FFD09
+:10371000EFD6BFC3AF93D23C77A5027D5DABE7FA8E
+:10372000EB5ABD85E8676CFC243DD2CDC5CBD143B7
+:10373000428E1E0A92A3353DE88145A9527E5E1C49
+:103740001FCC117C33DEC4ED4894F381E3B5A68D24
+:103750007E08F7B13A95EBD99F6BDD3DC9FFD5A93E
+:103760009726FF97A45E9CFCFFEF54FE9D0AADBC1C
+:10377000C70F71A3BC3FBDF3721FEA83830CF40330
+:10378000EAC19668C726A10F485F44C5F87E481F66
+:1037900014F69EFEDFA9E1F5C1666CFFB1FA40D2D6
+:1037A00097E41BC927922FB47C24F962C26FE1BC55
+:1037B00088787A8BDF8FAAD67B9B280EE9881E8CAF
+:1037C000FCD96DC76D5388DF42F484E01F3FBF040E
+:1037D000EB0DC91F925F24FF540BFE9829F843F2AA
+:1037E000C56EB5F9D111980A90E6F908E588E49319
+:1037F000AAE7B5FAA147BA424F239B195FC790AE1B
+:10380000AAA10CA42B530FFC70F012F5C2BE8BA41E
+:10381000A7AFFEF3F4F4550FF474E6A7D053A81D38
+:10382000FB61BE03D673361FE46DA69FDE26FC8DBA
+:1038300071FB219B9F07F646F17DEE35A693FF674E
+:10384000C2F73CCF57DA033385BF41D2691ED80196
+:103850006943FCF8C7F3C0BC8B937B8467537C87B8
+:1038600011CF2733A10CB4037AB27F53D32E4DEE80
+:10387000458AFE17C2F380B49FDD6E1C90161EAF02
+:1038800003D37E025E2762A22AF92BB24B5CA3000F
+:103890003F0F89BAB74F09C2F1FA02F9FCB2552EAF
+:1038A0003DCA07D6FDDD75F477BCA5CA7ACEFE31D8
+:1038B000B09E098F32BF1F1D9E8F1D15D3ED1F5166
+:1038C00098BF7F715AD6FE95A4E71B45DE4AA79E96
+:1038D000C783443D1FEA96807A81A6BE96F7B7EA71
+:1038E0003B59603E09D28D92CBF1EC0EB01F60FACD
+:1038F000F6B3A82F6C0A43FF466DFC8657CFA25C37
+:10390000DBA1506CAA1B0EDE810407FA3E38D507F6
+:10391000EF775DC6D8CDDB78FDF6B54356792F132A
+:10392000E306DC1B32342B2ECA4728507C5999A160
+:10393000F0BE3D4DCA13B91E46F71402DE6798AFBC
+:103940007729EF77E74D67D1FBADA64B98FF8651FE
+:10395000E1EF6FAC10FDC6E4C7847DFE709ACAE14A
+:103960002FFC06343F344D690E7F9FFF09C12F1D88
+:10397000183F21784E5A85FEED0EA384B77B15C201
+:103980007B2C63417E34989FEA1BD7BA4B1AF47C98
+:10399000BB2E0DBC7E68BF77A505DB03F49B065FDD
+:1039A000A61F80F7DD61DE7704BFDFFA43F85A1205
+:1039B000F2BEA0DB59928E5D41F41EA377137DC643
+:1039C000C42B36B4A36BDC912BF1BCE0E7CFD21251
+:1039D000829B8C1384F0DFB4923103C84E12CF6FF8
+:1039E0005B85FCEBD675F7E7FC28E91AAF36015C7E
+:1039F000C9F507EFBF9C76EB2AF44F025DD073AA9E
+:103A0000EB03D6ADE5C7664D7D94867F05FF91FC3F
+:103A1000407D0070CA41F9167FC8E808A0934F04A2
+:103A20009C4E897CF28ED1DC9EECC8E2E577693C45
+:103A30002EF599A0CB53929EA202E09016443FF43B
+:103A4000F72102F64D70BA295EF2F3BD25C5C0BF5D
+:103A50001D76FEFC7FD6FE669537CD5FD78EF7CFFD
+:103A6000B5F796205CBAC7F72EDA8F76C44D026E92
+:103A7000DFADBD67BF7780C073A2FFBBAB401FF453
+:103A80003D9E6AA40F25943E5E0DA52FAFE67DFAFC
+:103A90003B043DBDFFB75079E0D2BCCFF07B10179F
+:103AA000FFBEC05BB106AFE335781DA3A997CABAC4
+:103AB0002F48FE4AB95CBEE3E1FB12E3D1AFA9D0C7
+:103AC00075243F3D3F48F43CD726E97715C1D54FD3
+:103AD000CF0FED47FA9DDC2CE9B591F4CF2494C3C8
+:103AE00023FCF5292887A8FE7009C6C5FCFAEA91CF
+:103AF0005528B76F6890FD1FA5FE372F93E3ADA63D
+:103B0000E7128F8C3D46FAEEA67CA9AF1E27B93F7F
+:103B1000A785BFEF4CFFDDFE1FE487460D5CD66A2C
+:103B2000EA5E4DFFD517D06FCB34EF2FD23C5FA9A3
+:103B3000A9AFD1D41B82DF2F9BA1101F9615F0389F
+:103B4000A5962FB5F4E14AEFB673BAF5B96226FB34
+:103B50002E88AF26D4F3FAB5E91B4B1ACC01F575C4
+:103B60009B4A385FC06C01F79F41E67A55A0074336
+:103B70000F72B320BD07B9D94FABEFF9F37FE0AFB8
+:103B80002914370AB24B76ABC1F53655ACDBBB75A1
+:103B9000FF820181F1D5E74BF05CDD631CC7DB5C84
+:103BA0003226D02E62CD25AE807DCAFEE3BEFB5EFE
+:103BB000C5F93CEBFE5CB2D18C714F11DFB4F3124E
+:103BC000F4A58AFABA56F86FC6611E2FC693A25A98
+:103BD00073E60F08D8276BEE83FB6CBB5BE5DFB7A2
+:103BE000AB07FC009CCA9883F250A73317E5A5B633
+:103BF000C5C42CFC2F786FF7DDEA42D4D30717C673
+:103C0000515ED32BE9FC7CB13BA677E24CA8B745CB
+:103C1000DF46F2B6EDFEB154EE525DCBBB6C8C2D9F
+:103C20005EF74A89F9727C1E4370BA3BFDA5922566
+:103C300040EFF7A63BE87D8FDD96B803EDED070C6E
+:103C40001437040E7892E8E741D3603C6F972DE972
+:103C50004F71B1F2C7268DC37BA4E5F719285ED258
+:103C6000A9B3919FC8F3C058CA939AB14C94DEABE4
+:103C7000A97CE5DF7FACC77BA65DEB14FA4ECD5582
+:103C80005F37FF6D10D42B1BB2E97EC6CBE774946F
+:103C900017FEE99ABE3ECC533E1C5947F9A5D09F6A
+:103CA000EEBB569E77EC2FC9C7FEAA0D53388E4245
+:103CB0003BDACF4757A84FE13DCE32AB250AF3BBE5
+:103CC0008F7EC7C8AF73F43E137DEFE653B3E7D6DC
+:103CD00035F1748F092D7D765471581580C3DAF44F
+:103CE000FD25C929D86E12F8DC6F2D033E2FD37540
+:103CF000D30FE9938A585E5FBBEECD924DB08FA390
+:103D00004FF4A57CB1840CD7BA7480D7E10CD7935B
+:103D1000548AFBD9AFFC9BC7255F3A599E88F4B5FE
+:103D200059D0F5CBE7CA1303FF6E41C5293DD1C178
+:103D30002B46C702FAEE6954BA82E76CA08338F4C6
+:103D40009BCF10E716A0E7855BC3D8574BD3B93D8F
+:103D5000D6F6DB84518E20BAFE98E4299D37A0FE6A
+:103D600062FA47A4E78E9816622E75773E24DB1D13
+:103D70004970323445FA2233D17FEA1AE7A2F34F71
+:103D8000739FC996003E14FD3FF1F2FCDF4FA03F48
+:103D90009EFB3EF1FE3F4B603C43F6AFB45ABC681D
+:103DA0005C1CB358F4888F83FAC547313FAD629DE0
+:103DB00081F440C5BA84455D287F806ED0BFA6DD02
+:103DC0009729C3C0FD183DC6573F2F199316785E3B
+:103DD0003941F2BB27BE7C37FD44C9C6013DF365BE
+:103DE000A58DCBA771EBF8F7752B8758F474BF7BC3
+:103DF000DDAB9BE81EF0BCC85CBC5751B9CE44F8A3
+:103E0000EAB458BCB62BF1BE81451F0BE5A174AED8
+:103E10004FF5190EC24791CAF411B954D23D0A198F
+:103E20003F3CB1F0D1C7311DF373E6BB7E18C0EF44
+:103E30008C8BD3E9996D2AF91FB5F1C4EAD7B71A6B
+:103E40000BD98F8827F61047AC629DE2BBE2E1E315
+:103E500089DA38E2BFD2C5BDB3EE38A281BE875140
+:103E600029E288456B155A7FE542FEBD92A238EEE5
+:103E70003F3EB218E8A02FEDDF6BCBC53C69AE7FAB
+:103E80002A99E28B805FAF5E3B8FFC9975E91C5EDF
+:103E900065E23BB087239D1978DEAF58174970AEB5
+:103EA0007C72F6074FE4E37DC089F181E76B9BA04C
+:103EB0000F189FE13D6839CEB125F7D077678BD6D3
+:103EC000C33919F3B463D973376522DE523230DE59
+:103ED00029FB552EBDBB0FEF07E76CD877D90A95A4
+:103EE0007F0F6BBB89F421F07C320BB82F3E63D976
+:103EF000EB4623D7672C79A8B0B31DFEFB6C9FC29D
+:103F000073FC0441ADB8B726E127EF5B95E9F8F7FC
+:103F1000364B750ADDC3028946F7977E91C1FDA332
+:103F20007919DCCE2DCB70D23D9EEA5526E7D24CD6
+:103F30003E4EF7BD7538E755EB3A2A28AEF9171310
+:103F4000F9576A9745BA22AD3C1FE3F9019477AD62
+:103F500037023CAA1C5C6EFC42D063AD63D2D594A0
+:103F60009FAE6707F0EF07565BB89CAC8E05B89B19
+:103F70003901E986E2F73919E553E2B8298302E607
+:103F800057443B8CE3B0FAC7DDAB630DE8A7C1FE35
+:103F9000970F4238C65D7F23AEEF5995F81A80B46B
+:103FA000AA00EDBF67D53C3C7797ADD83D0EE5F054
+:103FB000DC2D83F146052B7BEE5DD2237305FE3BA2
+:103FC000453E5A39D4F1BB81376470B9E951B9DF44
+:103FD000E806012F4907F279F50A03F7E383BC47A6
+:103FE0000153BDE4431AB7DAD2918872B87ABB8123
+:103FF000EE87DF8CEB0638972F491F7500E8AADCA7
+:104000001043DF51ADF24E3462BDAA51A1BAFFBDDB
+:10401000840CA4D32F96BD6045FA391CD99A83FA33
+:10402000A96B5EA493EE29DAB8DFEE8B653974AF25
+:104030006986ADC382DF6599B120DB8E72FCA0ADCD
+:10404000D588CF0F3667EAB0EEB2D94661DDA5BF9D
+:1040500092EA5F887C17FA41BA52389EAB9A761B77
+:10406000F1EF2FDD2BE8E2D4B3EFF6413F50754678
+:10407000471FD42F40077D5211CECF28A49F6B9AA3
+:10408000781EBCA4831AA403E0BB39820E6AB6BDB5
+:104090007017F2430DE23F37948E809EDBA9FDF945
+:1040A0000DE3187FBF1DE944EA33A82F33A03FCEAC
+:1040B000C8EB8B05FEA17D0C6FF70EE0F975DDF9FD
+:1040C00008417CD0137ED766E8043E4C2477D78A1B
+:1040D000FD76AED86E45FC9D7A76F71E8CB7543FC0
+:1040E0000FDADA11861F043C6A71FF565A3FD9195C
+:1040F000B5B85FAB7FFFDD742FF8B096F1FDC9FD59
+:10410000D6EAC5FEE573F1FE3AB1CF2A26E0B5AD99
+:104110002FE73BC167C8C7F4DD21B13F8F3DF8BB36
+:10412000BABBC5FE9A44C96CCD56840FE217E50FA1
+:10413000D08FCB28E5097439B56503E5F74B7CC909
+:10414000F5BFEFD72B2EFC9354128F9D3D7CF7B615
+:1041500045F0C9A1FB92327600FCBED84C9F0D24DD
+:104160007AD507CC27E946CE57F4A749D7E2BE61F6
+:10417000FC561C5FCE7BD01BADC7710E32CE1F72BA
+:10418000FD922F8BEAA75D3BD88AFD4E59B2D15ED6
+:1041900011787C3FC346EFBBD06E80F75D3B14F2D5
+:1041A0005F1F12E7FD43F7BD602D1FE0A7F777C53E
+:1041B000BA259DE10FFAC9E47AF7DAB93F58BB6E28
+:1041C0002987E4BA8BEEBFE15A6C97EBC7F8512010
+:1041D0009D4A384A7A95F7FAB4744B3427F5AADA2F
+:1041E000337DD7A61DA2FC9D9076ED78C23E3A2C79
+:1041F000F2CDBB9E56F97DE765C9ED41F78E1833C8
+:1042000007EA9F25F3AEB615623CB749A17B1E5263
+:10421000AFC0CF4A7D803E92F6C1F0DE3C7FA5362E
+:10422000DE7502F15975BC631C7E9244DAA5577D98
+:10423000DDAAC6A0FF6A1BCF8393745375B29DF8A5
+:10424000A15ADC932A5BF1EEC46148F74F1B28CEDC
+:104250005376DF5823DAFBB3374D1F8AE0C07B1259
+:1042600028DF4F6C1C9247E061B6C4EBF1BEC4C6B8
+:1042700047AFC7BF5F3A63874ADFA1C171908FCB59
+:10428000EEC8237FEBE1C8CE8923D0AEFFB56A43E9
+:10429000BB7EE4A6218BB0FF484BEF58FA78D0C61E
+:1042A00038AABBF431A427A41D2CF303EBC5BD90A1
+:1042B000ECDE9CAF7A75978AC80BACEF83F1F9AE50
+:1042C0000D91F4DDA852A3A3B915E7DB9944E78E5D
+:1042D0005A382625DBE99E2BD969B38C2C222597E9
+:1042E000DA233045F97543C71DA84F5EBFC33218A6
+:1042F000BF8BCBD4F343CBB97DCDE39071C1DF61EC
+:1043000092EBC8EACDE9573B9E7C7F2F9E2BEC7445
+:104310009F91DE3FB1ECE9EB511F9ED89C63C77DB6
+:104320001FDB1949F70B8E1982BFE778A9F7C2B4D2
+:10433000F7A9E43DD7FCDEC1F69CA4FB0BDECBB9AC
+:10434000ECD2F2984E2E66744FFC5C06E3FEE4E875
+:10435000EFB6627E6145A3C986F7648E20FD637C5B
+:104360006BBB4ADF01A2BBDF80AF23DBF3E83E700B
+:10437000C5C7BC5ED1ACF8F0FE72FBC3F753FEC2FA
+:104380004CB037F16A79B73DBDFAE1EB910DCE380B
+:104390003DCBF13B006736F37C8B90EF3ABCBE75AA
+:1043A0004F8AE3FFBFFD2CFD13D37B07DF4793F05C
+:1043B00096E7AA57802E0A72FDF0FB72F12CB29F8D
+:1043C0004F2EF650795A39B46A24D2B32586EE15A9
+:1043D000BCB4E35115BF7353BD6DF0793C1F8F30F2
+:1043E000C7D0F79FBE5CBC90829A2717D7893F8AB7
+:1043F000B654F8157C545EB5AD8DDEFB72475E0B8E
+:10440000DEEB7DD91CC3C59AAB20E83B9912BF3DBA
+:10441000DD5796FBFAFCD71CCF72DD9F6F9E6EC5F1
+:104420007DB5FD21AE6538E2373AC6867660A5C80F
+:104430002F39BA86DBD9C72362FEAB18F07C7CED3E
+:104440009444FC0ED1CCB6A9D7637BC54EC586E794
+:1044500003E7CE49563CCF7DA6EFB4E23DAACFD6C6
+:10446000C8FB573EFABB7B23C6B329D87F44AB9E1B
+:10447000393229844CF432FCA49EEECB7E01EDE46B
+:104480003F391F45FE13F889C37C92992F72BF4BA9
+:10449000F7F9579CFF468A7DB7F7B6CBF806B517F4
+:1044A00015F0F6636BB796D0DF4FDE68B0E1BABFA8
+:1044B000DC68A0F1E7C0B94D07EB3DBE999F83B022
+:1044C0008EE7E8139BF979674E333FEF54CF33B84B
+:1044D000F8FDD260BA2C0AE847DF2DEBE1BB23736D
+:1044E0005C7C7F73407FE27E2F44BFB1AC99EE9F2E
+:1044F0005D6A3EA9967EFFAA9117DD74DB13BD08A5
+:10450000B822FF23DD4ABA98B386C7F5EDCD830BF9
+:1045100091FE249D68BF03586F64FC3BB2BA28FA31
+:10452000EEF724B3C380FA624A7CE718044F5F07B2
+:1045300097AF6A91CE85F7E458BD29EC77C4DE15B4
+:10454000F2781ABC4BF7BB7ADBF8F7CFC47D315950
+:1045500082BE4A477D3E29DAFE8D03BA74AEFFF271
+:104560003A3DD0F5A491F63BB29D80D7F55FF37A42
+:104570009E7D7B16D43FEF7DF63A3DEC6FD295F6EB
+:104580002106A82F59F2CD7563E0B9C9E13AD83BAD
+:10459000609E139B92D2717FD07E08DBA7277A8E14
+:1045A00060592BEE8F9D56BA062DCCF4F77F7BA772
+:1045B000E5E04B0E7FBDD3C0E8BB3BA77BCBF587C7
+:1045C0002F9D0ED7A9DE09A1EDE58CDD47F97C5EB4
+:1045D0007E6F077EDC118978AF8AD35DB9BCC7D303
+:1045E000A0B9C7E3E4F7D5E4FD2A797FEA72FFFDBD
+:1045F000B3B59772FFECFF0069F3B24F0080000083
+:10460000000000001F8B08000000000000FFE57D97
+:104610000B74545596E8B955B73E492A4925845438
+:1046200025A984AA7C2B90C0257C0C3148E5030485
+:104630008858286AD4A005A2808214011D74F455FC
+:1046400061307C9AE98E9F1722462D10957178DD96
+:10465000D1B16D868F532032FC9A0EB463EB8CD3AC
+:104660001DD0D168631B3138F40C366FEF7DCE4D11
+:10467000EA562A80BEE77B6FAD975EF6619F73EEC8
+:10468000F9ECB3FF67DF5B5F192CEBA564C6240F61
+:1046900063AB53A1745A596319947BFFE9CFD26875
+:1046A000C69A83AC3B2E8FC15FA3F5D35150CF7C0C
+:1046B000BA4B502E4B481ACDC660991362D06F99F1
+:1046C00089B1AE12E8263B6DCCC2D81209FE9D011D
+:1046D000FFF9CA194B676C9515FEED44B84287F097
+:1046E0008366467F9F05983FDFC0D81F4F742539EA
+:1046F000F58C9D9D1D2E0CBB18FB65BCCFE69C0068
+:10470000ED1DCD8EA634C6BE7CC3A4D443FF9ED07F
+:10471000DF27F960FCA57AE6EF84926D1FCED824DE
+:10472000282FEAC353A0DF6157F1B68DF0BCCBA9A7
+:10473000630C9E3FEB0AE7FCF578C6822E93F232BB
+:10474000A37E773280EB1E9F3E1CFB9D7D7D5DFE30
+:104750003DB06E93CC5812EC7B068C590E7830002D
+:10476000AC2FC30742340EB40793A0BEC5F5740E38
+:10477000237C302F9BC8D80D8CEFEB0639BC1FF182
+:10478000C5946419F7379B6F0FDB83328CA33333E7
+:1047900003AEBB9875583F4D0098B18E4BC3607FF8
+:1047A00066C063329680C724C6A6EAA113ACAFE9FF
+:1047B00097FA9009D6D784781470D085237A2CD7AD
+:1047C000C3F88BC5BCCB8EBC6BC4C15810FE07EBC5
+:1047D0005922E65DDC71773D9ECB9290E14CB7C0EB
+:1047E000F525FA7F0F9DC772D1EFFEF2AD469CE230
+:1047F000FE1DDA7ECBD9A6AFF5F0FC52D66DC4FD16
+:104800002EEB8C6AEFA8F90CD7BB7C97B6BEDE996D
+:10481000988674C2C6B2B197F4544DE7BD48F49976
+:10482000AA6F74CAB89FE166C50413373D9F47F469
+:10483000C2DE0CB0C87EAC6318D14F8B4B4FE7B1D2
+:104840006497C49CE318BB7E5716734253FDAE6158
+:1048500054265DC8A0FACF5F3936DE5732705ED776
+:10486000BF6AABC6F55DFF6A1195EA3A9A041D4E20
+:10487000D5977486611DE72CB00E809B8EC0628137
+:104880007E9A6ED68718E19999B1BF572CC76B599C
+:10489000DFA54F42580E8AFD4A97243A84643C1F94
+:1048A000EF613D437A621E03B53B9979CDA55CA0CB
+:1048B0001BBB8E3963E0DF24CE2FCE19CF9CEE8157
+:1048C000763958FCB34A588761AE4109417B735C25
+:1048D000D236E43316F474E5C3730DE2B9AE384E44
+:1048E0003709EE54CDF32A1DDC2AFAAD4B9A76181F
+:1048F000E9B2C1B388E82151C9D4ACC7A45F6A400A
+:10490000FAB9D567F8A43B621CA25F58C70D5E29AF
+:1049100084FC787383B6DD50F975AD4425D4478E99
+:10492000E7D5F6FB29D203D03B107E71243D0C9CC9
+:1049300083C5A3C373F02412BDCBCCB9B912E05B1D
+:104940000E1B18EEDF14CFF7790E319786FD800F1E
+:1049500060E2758817A84F2ED7E237C5A3C5E7B028
+:104960003A2D7E867BB5FBB735E46ADA337C233596
+:10497000ED598BCB3470B6BF42D37FC4EA6A0DECDD
+:104980000ACED4F4CF5B7FA3062E68BD5DD3BFA84B
+:104990007D81A6BD38749FA67DD48E260D5CDAF984
+:1049A00088A6FF985D8F6BDAC786376ADAC71D7EE7
+:1049B0004A034FE8DAA2E97FCD07DB34ED93BA5F13
+:1049C000D3B45FDBF386069EDCBB5BD37FCA850373
+:1049D0001AB88A1DD3F4AF31FF56034FB5FEABA60C
+:1049E000FF74FBC79AF619CE3F6ADA67B9BFD1D216
+:1049F0006B3C9793D72BFFA579EE5993EFDF505F70
+:104A0000344B95DD4186F4EB243EBA354DA7840145
+:104A1000FE832A97041D9E1C612539C1F2598EB769
+:104A200014E9B0328C7C7C6E9744F2E0AB28BD2850
+:104A3000FFD1EB91A09DFD4A525E7622DD415DC41F
+:104A4000FC291E339323D639ACCEAA81877BED9AFD
+:104A5000FEB606A7A63DC3E7D6B4672D563470B69A
+:104A6000BF5CD37FC46A8F067605EB34FDF3D67B3B
+:104A70003570416B83A67F51BB4FD35E1C5AAC6926
+:104A80001FB5C3AF814B3B576BFA8FD915D4B48F89
+:104A90000DAFD7B48F3BDCAA812774B56BFA5FF3F7
+:104AA0004148D33EA97B87A6FDDA9E4E0D3CB977DF
+:104AB00097A6FF940B610D5CC58E68FAD7984F6A74
+:104AC000E0A9D60F35FDA7DB4F6BDA67383FD7B4C7
+:104AD000AB76D02CF7D7DA7A61175DAFFC59F37C4F
+:104AE000B0DAC3903E826F484AB313D6EB02E13F7F
+:104AF0009CE47C779C1EED282F18148C0129AD4175
+:104B0000FD920C420CE90A488C35A6E22840AC2004
+:104B1000B74955C1F3C9684F0090AA73B9FCA01FEB
+:104B200013D85AEBA766B21B1C9740DF5DC2BF29A2
+:104B3000834B94A09FAAEB85F966A14E023A6F724F
+:104B4000F93C2E58CF7D9DAF4FCB626827045B7038
+:104B50001DA00793BB416F9E886377794B068F3703
+:104B6000C30C788998EF485CABA3CC32F4FC33CC0F
+:104B700067A97FFFB8063EAE04FB6B8A18FFA7A0AB
+:104B8000EE65B0FB5A03C037058C3D15B012FC4CE6
+:104B9000C04E705BC049657BC04DE5968042ED1DFF
+:104BA0008172825F0878080E05EAA8DC16F052FDD3
+:104BB000F64003C1AF047C54EE082CA6F2B5809FEA
+:104BC000DA77065613FCF34090CACEC07AAA7F2348
+:104BD000D04AF09B817682DF0A84A8DC15D841E5B3
+:104BE000EE4027B5EF0DEC22F8ED4098E070E03094
+:104BF000C107025D041F0C7C40F0A140379587037C
+:104C00003D541E0DF452FBF1C0058207CE4B6B578D
+:104C10003361572E1274C0D2B83D792F3F52F685BA
+:104C20008E2D46BB7791A04343359887407786CC3D
+:104C3000C26DCD2E3C6AA01337D1C971B42FAF9687
+:104C40004ED070407A0D563337D29B5AB654E9C9CC
+:104C5000FE0CAE90422F73BB88EB6F3353F537B524
+:104C6000373E2885D09E9B0776B211F8E623619FD8
+:104C70007C14C7E5F539BFC18D765FA314AFC0665C
+:104C800001FE77B23BE02F8CA47FD75ED356B49F52
+:104C9000D4F535C2383A18E7BFEC2E5A57233B6C8F
+:104CA000C0F540BD470FFC72C6E6DBE202BABE2F7C
+:104CB0005B17342213594285DE44C68C76DFF348F5
+:104CC000E7E7FCF71CC2C1175995429CE77A537875
+:104CD000F8AD307FEF11BDB2CD39345E96B7CE005E
+:104CE000E17D99F6B73F77A01D5FF717BD0FCFE1C4
+:104CF0008421B1210474DDE99288CF3A5D3A4DD91F
+:104D000066F7FD02D7F96DA2FF4E1DA0F2DBEB5650
+:104D1000BCB212B6D4B8A22019ED55F00F0C685FE2
+:104D2000CF614E03CA879B98E75D1CEA66E623F8CD
+:104D30005616A452B6F976E1BE6E6321827D15A6A1
+:104D40009C58FB8A5ED73B38D8702C759AF290DD60
+:104D50007700C7FB36D143EB3A31697A21EE4B5DE0
+:104D60009739C349FD66B3DE17707DDFEEFBFA535A
+:104D7000296F309DFC88F4618169B03F33C2793777
+:104D800003EFE038CD0F4B21A473953E1AC14CA719
+:104D9000F11F857A29925E804ED07F4BEBCD99939F
+:104DA00048F4D24DF26F923E68047BFA842E542868
+:104DB000E9894E8C12AC73511AD049EED0F4F0C090
+:104DC0007A2823E420D0D91738DE9FFEE11A37E293
+:104DD0006DF9DB939C88B7661D9C07D073F0A89E85
+:104DE000EC042644BBFEDAD210F907B2A2CC29C5E6
+:104DF00073E37271BF9EAD7E3D86DC4DC8E5F474F1
+:104E0000C26EA80BD1B89CEFD5767D2E3F477D2E84
+:104E10003FDFA6159F2DD5C3FA4F1CF8DCE82C8D7B
+:104E2000B18FD53F79283F82AE97EF3A3DCD837E53
+:104E300017EB2EB93171A0BE50CCABD291DE98E801
+:104E4000DB6A895C573F5DC7E7225DA7005DE7111C
+:104E50005D7F8A76F96C9333F95628BB013561285A
+:104E60007D2F5AC97F5CC0142A17322F958B800C76
+:104E7000908EBDC1278D88F7FB5827D53F507E7790
+:104E80003AD2F5BD3A1FF9D94B5917D52F67BDB5A1
+:104E900078B437AF5FF3AE1D567D53EB9353914417
+:104EA0006F0CCD7F17CB39DBA54F834EE293EC5CC3
+:104EB000C047B7E47F2213E6BF7D67D51359503F43
+:104EC0005BCFCF851DE3E7A2CA91E87D035F14E0C5
+:104ED000F3DFA678685FFAA43A0D5F343ECE3C1249
+:104EE0008CD3BBCF14DAE68AE093F2FBFF9085F215
+:104EF0004CEEBD13CF7BF9DBA6543CEFFB18D7FB80
+:104F000092478DAFA8FA9E11BDDFCFE215ECF78571
+:104F1000A0EF2FB219D1F71712388A65037628CB84
+:104F2000F1D9CBF206F4F672DDCED18827D0EB951D
+:104F3000780EF77DDCD932D685FA2094837688E125
+:104F40003593D2ECD2E817762901858D9F213E7FDB
+:104F50008AE38E19BC2EA9FCD09FD1EE301959D00E
+:104F60005C467CCE26227F671A89BF9A11B57938B4
+:104F70008FD7E9B70C1EFF8458EFE1EFB83F1D84CF
+:104F8000FDBC2CC59A87EB2F53FCC03C2447D2199B
+:104F9000CD73472EE763753E66E976A09D7E34C1EA
+:104FA000773B9E8F1A4752FDC8C3AECFF2F17C66A5
+:104FB000576C50E5338DC7AEE372E984C11944F8EC
+:104FC00044954B0109D62F6F6F28FFA70F701D372F
+:104FD000982D618C77B04AC3D97EFF3577401FDFAB
+:104FE000A0EAE3CAA8F88E1AF7618A01D757CC3E27
+:104FF00052F141F11D554E0ED2BFB0B12EC49F8863
+:1050000097F5C779FEB93FCEA3C3798D428E32E6BC
+:10501000777B23F8D4D600AE8BC67F30B37C8DFF70
+:1050200060D5C0D97EBBA6FF88D54E4DBB2BE8D638
+:10503000B4E7AD573470416BB9A67F51BB47031736
+:1050400087EA34FD47EDF06AE0D2CE064DFF31BB72
+:105050007C9AF6B1E1C59AF67187FD1A7842D76A53
+:105060004DFF6B3E086ADA2775AFD7B45FDBD3AA72
+:105070008127F7B66BFA4FB910D2B457B1BFD5B488
+:10508000D7985FD7C02FC6F178E754EB3F689E9B57
+:105090006EDFAF815F88E7F19A19CE23DAE7C5F9B1
+:1050A000066F8B277E98E53EA969DFFFC8C8CD8DC6
+:1050B000C02FA14774E47FB6D5713DC51AAA391D2A
+:1050C000C4F1BED72B1F6AE6CBD1F7BA908E9D7A7A
+:1050D0006B26F2757EF99C034076ACD0B3A21AC55C
+:1050E0009DBBEEC903588EF4BE5E8D6C53D270F238
+:1050F0000096A37D5F570319336571CA3B5896F933
+:10510000C7D6D87089ABE7BC83E5C4E08A1A94B3EC
+:1051100060267EB108D67D3E38926D84752565AADD
+:10512000715E0FD1EDAA0C1DF1F9AADB2C14374BDF
+:10513000BFD622A33EDF1CE81A7910ECDCF4A7D31B
+:10514000D762DC693DD8F9A122B017C0EEC7F25989
+:10515000B0EB43E01C6D04BB1FCB4D60F763FD73E8
+:1051600060F7239CFE74D97A7C6ED5C97BEA7261A4
+:10517000FC110FCA563453D739752B0EC07AEC0F79
+:105180001AAD284B8CAE67E29CB08EEC65B08E0AEF
+:10519000428B0751FDEC52301C32391C07FDEC2BC1
+:1051A000741AB81DFF45B02E588BCF973EE9DEAE7E
+:1051B00030F6F9B6B337198A619F795DB76D4D0145
+:1051C000389779E602BED3F12C60FC93798FCD0934
+:1051D000960C8697147AFF487249EE2C463EB51617
+:1051E0007D9481EBDA50FD85A2B3E23C8FCC390887
+:1051F000EB7E7E78BC58E72373AAF2AF665CCF796A
+:1052000094EF50EFEF8C2147FE53E8FF93795C2F2A
+:10521000C39F15E5938D9308B3819D940CF276F3AB
+:10522000A4D5A7D1A790AD4109E523BB08CF4F1462
+:1052300028C823784AFC441EB247795354E433E724
+:10524000C178361FD84E91F1B1C55A78339CE71911
+:10525000C3C07A0C77E98232ECC1F0925751609E5C
+:105260008E79B05F80371BB5FE65918E917D719F01
+:10527000BAEE8B372968A7DD97C7F5F09680BBECAF
+:105280001303FA7F4AD9274047998BFD920FE4AB6D
+:10529000ADD1AB04A19FE1D2DFEF372261DFC53A88
+:1052A000519F63FD9A08BB27478C6BB8A427BC1994
+:1052B0009ABD4A6AC4FC06BDE4EF8C617795E6C9E5
+:1052C000FCB96646ED86771E969C305F666348BAE9
+:1052D00087C6F14B0AD4DBC2BC3EABB1535A08F0CF
+:1052E0001D794E3A07759CACC5B0FE083CD9E5A0C7
+:1052F0006485E7ED8F0625C483DDEA555822E2DA9E
+:105300004BFCBD52F0B47DF5C4B24F86E1BABD8A04
+:1053100017E79BA5F29BDFCA703D1F2BBFA942BDBB
+:10532000F61B3DC3FB8C6F9C4A725A8C7DA8A5A9C5
+:105330005BCF3C97F16792721EF1939EBCDDE22C2D
+:1053400000FE7DF1364BC3D6187476471EA7B375A1
+:1053500099AADEE2EB49D7733CA9FAEA1B2BA71FF7
+:10536000556EAD4CE1B03ACECAECF12437865A8F77
+:10537000AD3D8EF922D6BB19E6B1E2FDCC772BAC60
+:105380008837F021BC349FCCE5E9D6E7DDE4374629
+:10539000D3CF203E00D19B5C8674D91D6A06BA31FA
+:1053A000CD332A682FDAFE5B8B84722493B54A28AA
+:1053B000476DD9B58765D4E7B2AFD81BC38EBE128F
+:1053C0003FA8E7A9DA2583CFCFF9BB2AB2430D0C5A
+:1053D000E9B6C9E5B4E1F9A974DA746478AA2FE2F0
+:1053E0003CD70B3A2E67AD7AE4D30AD6496525EB54
+:1053F000A2F23AD64BA58759652CAB9942652DF39D
+:1054000052398DF9A9AC63AD54CE649D54D6B32EF8
+:105410002AC1BFA3D2CBACE487DE08760C96739981
+:1054200097CA5B989FCA2D48DF13F0FEA195E0DB79
+:10543000592795BB80FF9D45181F3153B917E43993
+:10544000966F833CC7320CF2DC69C2F8889BCA8332
+:105450000185CA4381722A0F073CD4EF68A08ECA27
+:10546000E3012F9527020D5476057CD4EF5460316B
+:1054700095EF05FC54BE1F584DE507812095FF129E
+:10548000584F659111E40AE2DBDD3D16FD9A9C8FD1
+:105490008D1E27E8A34FF384FFEBD1FDF7E2F178EF
+:1054A0008E3ABA83B1D5AE94901E6D6E9D2704E5F9
+:1054B000467793743794EB4E703BD6644B243BD9BC
+:1054C000D6BE4A72C2B8BBA46E7D029CEDDEBC0F94
+:1054D000E798414F54ED656B1314847FFFA419E8DE
+:1054E00070ABC1DFBB15DA7FF5D2BFCE3183CEAE54
+:1054F000483CF5C7D7384CED930EB2662BC007F287
+:105500004E3F9926F175A0103EFED2C773D6E4E354
+:105510003AB91C79D5058E36FA190F5BC8CF18DB5E
+:105520007E66AC0EE049AB2D65E81F47F4A3B8F5E5
+:1055300050FDA2DBD5E73A56A437231ED67D0AEEEE
+:105540008913E565F7588CCF458EABBBBAF999FE48
+:1055500032F347F6932E335E5191E754DEFF037426
+:105560001E4DDF864B1FBFAEA3F8983515F5FAF632
+:10557000142E777AB3E343DB60DDDB5305BC219F58
+:10558000F6B50E61D8D7BA8DB964C76F8FF3361DE3
+:10559000C1F6BFD129DBA0697BBC6F6331C1F914AF
+:1055A000AF5997EA77A35ECA49E0FAB1CDF1489CBA
+:1055B0003382FFFF22E4EEE6CABEAEADE84FADD7C0
+:1055C000B102786EDBFA051BDC30CE4B9BC02E029D
+:1055D0003879F2C20D05D09EBB4137512F641EAE03
+:1055E000E3A54D0B5FD928E1B823530B61DC3C21C7
+:1055F0003F7386758F5D0974DE66D4C615FAF56350
+:105600003EE7978530CC19D0BF39225EB1D5C01A9C
+:1056100022F566413E97B73545BC344CE1F13CD3A9
+:1056200088F8D0E3B0FFAA113CFE93BED64CF19FA0
+:1056300074C77F9E9C0EEDE91D3A054D5AD9B6748C
+:105640008D01FD9EDB5827F2E356893F1FCCE6769D
+:1056500032182CB97322FC1EB037CAF223E2A7F627
+:1056600086A084718CAA114B258C37A73BEE933012
+:10567000FE91DEE0937C89E827F9A9FDAE229F2BFD
+:105680001FD6676F84E735F7B1BE0C3C5798B781DA
+:10569000F20964561639DFEC228E872764203DB468
+:1056A000DFD71A695DD1F89AE5AE1E993F7CE01C00
+:1056B000A3DBBFCCE7E7B8FD719802F960128F1F3A
+:1056C0009C783993ECE5D96DF11EF4234F3C39B247
+:1056D00096E0A72A3C68FF9E78B9621A96B39F9A13
+:1056E00049FD4E48EC30C605663F75BB8CF53979EF
+:1056F000B02E1CEFB491E871F653F789E71FA9C5E6
+:10570000F6725DF0EFD09F2E6F7E2D01E3051589B7
+:105710006F64617942D7BD6A3FCC7F8395FD1AD50E
+:10572000B57743DADFD4C13FE63C996BC0788C375C
+:105730003F97CEF326E631F07C072FF9B7953BBAB9
+:10574000DE018B8E5DD7D95B83D7BA9E5DD6835839
+:1057500056871534A359ED61EF412CA775F96BD12C
+:10576000BCA9FBA0F52096DD237D5EC4FFABFFED59
+:1057700096375E0578C463ABAC6887E63FDE3D6371
+:105780001BC52F0D0CF9A16092BF558F046CF6A6B6
+:10579000A27C78F6195987FADDE46A8D43D8744FF4
+:1057A000AE0EE34CDB535A17D3BE0BE219E2F128DD
+:1057B000E821A48B82146F2AF213F0259DC39D82E9
+:1057C0003E4D297E6B0AD68B7B8EFE7EF11C5ED809
+:1057D000DFAF354EA27952A5A0C4CD08B423EC4268
+:1057E0009FB7337F06E2C396E8DF8AF1AD822ACE07
+:1057F000FF2C91D305766F99488F50103EBDD53F51
+:105800000BCFC1E6EBCF1BE074076AB0DF3EC925C2
+:1058100098EE7F364B1C063943EBC23F8CE7A45B06
+:10582000D2C9CE51D76F6B80F122EC0EDCC78D96BA
+:1058300081E754BADB20F6F584280BE6F3F1D4F5C2
+:105840006ECCE77A1DD6EDD4E17AF4623DB00F5DFF
+:10585000C47A22FAD1FEFAD7CD143BD205637E89F1
+:1058600097CC2947EE7FA1CE13371AD7FFD65F61B9
+:105870005C2909E508ACF367FB2799914FA3F7F181
+:1058800042BE88FB80BD8CFEC34C1FE7DFE646BFEF
+:1058900084FE940D61DCBF43F6605CD46669920CB3
+:1058A00011FBB539B89E9ED9E8DF8F7265667982A3
+:1058B00082F43D8B75AEB572FE3E980FEB2B62FD08
+:1058C0007F163671C04E7CFE99F74EE2913A5867CA
+:1058D0005531EACFC7EEA5BC89CD8FCC3C8CEBCF40
+:1058E000743FB93F1506F47E2DCE7D3E8F6F6577F0
+:1058F000C89ABC872CBFACC98BC858AC6D077AD08E
+:10590000C02A5DD9A5D529A86F7409253367A09D44
+:1059100092A423F90E724A9A1BD31E8DA22B817F6B
+:10592000F57CDECDCFA773B359F839B05EC57C7373
+:10593000A2D8AC7A4E306F33B07932D07D73AD3EA1
+:1059400024A11F8FFDF132B2970DF7260E3EA7ADB1
+:1059500006E7CC1928A71FD45929AF2A0AAFA06798
+:10596000FE99FC9407D3A81DEA6533C53D23D6AB49
+:105970008F056BCFE34AFD3B5878CE0CD7E0FA4C4D
+:10598000C7DC99A8673397323AFFE8F6A247B5E734
+:105990004A7EEF788CA3B150F8079CE74CC7F65AC3
+:1059A000B4EFA3CF55A5BB9C61B1F5C223055C2F15
+:1059B000E42428A7EAC8AE90C94EF066CBC323FD05
+:1059C000A4EFF2B91F30E55716D243EC6373081FFA
+:1059D00055C25D3F298673A8EED3A1FBC2DE3D7E92
+:1059E000E0E999504EFDF57B4DC7A0DFD4EF2CE3E5
+:1059F000B07E37EB9E8181A0E06103F98D6BBE7CA8
+:105A0000A5150344CD8D4C41BDABCEE328E0FA6E25
+:105A10008F21E425F95A2CB36D2407D9C54B11F415
+:105A200002909EE887B7316F632BF991B6FC12861E
+:105A3000793CCDACF30ED297678D0CE3AF37363897
+:105A40000D55B0FF1B1B9D86F9789F21B33AB423F7
+:105A50006E6A50A8FEA64685D79B79FDDC060FD559
+:105A6000CF6DF4F07A0BD45B300F29D41580716FB1
+:105A7000B6A43A75781FD0E8E5ED174CD47E1CFC2F
+:105A800001CC278C8F0B91BC6FEDD1F17B237F7CF8
+:105A90004882B59A12CB0E3B117FF7E8145017CC11
+:105AA000942D332BC0CF3678437A687F8E853210A1
+:105AB00091BB1736790BA17EB743B6E2FE76837BA6
+:105AC0008BF947C1A532E19DFE00DEBDD841F73A12
+:105AD0005B45FC3EB8C44CF166B07528DECC9664DC
+:105AE0000A3B86B7772CB086D01E033948E7D87BAF
+:105AF0008F4C7600C8C3A36EB48B76E62B189FCA72
+:105B00005CAAE5B7F4850BAA68BC4666453FBDBEF6
+:105B1000918FD7BC5317D2A15D65B97126D241F3DD
+:105B20000EA6A03FFBECC253B5C310EE50142E3F9F
+:105B3000B472A179E153479CB81FBFCE5A40FD799A
+:105B40001CAFD95FBD5D2F0DF0339DB773407E0C48
+:105B50009637CA611C27635EB582F1C174D827C627
+:105B6000F33B8CBC3E78A74CF72DE90BE5B075F400
+:105B7000007F670B14A6231F26917CD1F0D7C89D08
+:105B80005AF879C1A7C0EF32EE2BB89D513E67D1CC
+:105B9000766D3F90933A9457D9EDDAFA5B8BFAE33E
+:105BA000021A3C44E3D9E6E7722F7A9F03FB0AC747
+:105BB00015D1BE747C5F28D7A0BED87280EA8B1B3B
+:105BC00065C5E94479D7790AF75FB453666180EB1C
+:105BD0001796CD447AAADFA4A3F0C8F5AC8BE4C233
+:105BE00095F6ADC63BA2F719BDBFEFF2F55C8EA8E6
+:105BF000F6E01366B207DB1EB6E8F09E15ECAD7852
+:105C00008C2BDC55541D2C407B40C81DC3253D9773
+:105C100027CD16A25383ED517764FCA16554F5138B
+:105C200005D46FD88D753C6E41FB8E96633F17E3AC
+:105C30004DEAD6E6E35DDB131F953FA6CDC79B7209
+:105C400021332A7F2C2F2A7F6C94A67DAA755C5461
+:105C5000FED8B551F963351A78967B96A6FFF5CA3A
+:105C60004D1AF886F23B34FDE778EED6B4DF547770
+:105C7000BFA6FD66EF4A0D7C6BC35F6BFADFE66B78
+:105C8000D6B4DFB1F8279AF668FF492D771570F979
+:105C9000BED9EE3F49016CD0F791F73D6A99DE28F5
+:105CA000F7469E7B5202B7A7A2FBFDB980D3FB8BC0
+:105CB000129F8F05ED9A781CF3D835F1BA7045859F
+:105CC000B91BC6711A95DF21DD62E20EBFBFB66B4C
+:105CD000EED9F63F0EFD60BCA6C45C1BEA3B8CFF10
+:105CE000FA40B9378774745F615BBF4A223DB86977
+:105CF000158FAB5C30523CAF7F1DAC8EC6FB46DCD3
+:105D00006BA9EBEC1071A42D18474285E49941FD75
+:105D100056C6F17E3F4D57E38E3E1A37A3DC18A4DA
+:105D2000FCBC857E09E3C0CD3E66C57B9374CB0287
+:105D30009AFF9B0625995D262EDA16B0330FCC67A5
+:105D40005F155C6384BD7D52D0F7D4B3F0BCDDCF6A
+:105D5000281ED35BF0ED53188FE943E108749D21B1
+:105D6000733C3FF7C0EECF5F81F9DAE6A597A15CFF
+:105D70008D6ECF5ABEF7EB4397697F6ED95B1FDEFE
+:105D80007BB9E71FD875BA25A27DC838694326F3C9
+:105D900044D001E02CE6FD805CC8F5F9F20A23C589
+:105DA000B1AE01FC1502BEBFAAF8CF893BE0B93FF6
+:105DB00039FBEE443B1DEA65AC877E84D73FE59F07
+:105DC000A3FC929C5160DFA3FD1D179B6EC715724B
+:105DD000BA956D8DBD18076A4A343AD1CFCF32BB20
+:105DE000CA3E1907746DE07E75B4FFFE5CBFBFDD6F
+:105DF00049FE779118274B947A2B7F9E99834C4EBE
+:105E000017F71431F0A14F6A97505E652E943F8DBD
+:105E1000E48BFD89468A23A45B44DCC1B258131786
+:105E200050E306FB13EF9590EED3C34B289E8FF102
+:105E3000021C6F5CA193D6111D2FC832E7D3BA861E
+:105E40001E9FF5D7274831E6895A871A9F889E27D3
+:105E500084F604EA9965F1644F44EF7B4961557912
+:105E6000E170E4D7DE93D3517E9F32903E1C8A5E70
+:105E700030CF3C1431FEB442EEDF63FE78643DE681
+:105E8000878722E3D9CC41EF2B100C2A6684B17BA3
+:105E90004311CE7794CF77C2A0D8C91E04B587FE30
+:105EA0005F7D21D703D330976D38F219F7CBDB81B3
+:105EB000AFB1DC12B0927DD601FC87F00B012795C3
+:105EC000A1809BCA6D0185DAB707CA097E25E0214A
+:105ED0007847A08ECAD7025EAADF196820F8E701CA
+:105EE0001F959D81C554FF46C04FF09B81D504BFCF
+:105EF00085F66001C6A9D753B93BD04AED7B03EDC7
+:105F000004BF1D0851190EECA0FA03814E820F0642
+:105F100076117C281026F870E0309547035D547F99
+:105F20003CF001C137E33EC9AE58DF15C078854F5C
+:105F300076A27DF7AC6FA115ED6BFB7C9D15C57945
+:105F4000BB4FB704E31C1D8DFC1E13EF23310E0461
+:105F5000766808ED39FBFC678E4CA5F6B9D4BE19FE
+:105F60008704A7C4B682DBAF6C9991FAD930210AB5
+:105F70009EEB58DA18D203DC5A184FEDB61532F9F9
+:105F80006DCFE9FC2985DCEE22F96D3370FB41A56C
+:105F90008335855CDEAE29E4F75C1F16F1734ACACF
+:105FA0008BAD479E2D54EDA6F587717FF679B03FF6
+:105FB0005CEFBC5566BC97B5DDA3B3727B93DFCBBA
+:105FC0003A60BFB87E580FC585D97C6E2FDBE6AD31
+:105FD000A57539E6DF48EDD6A24753D04F6FF7AF2E
+:105FE0009A43EB6D9429AED9EE3B9082F76CCF8942
+:105FF0007C27DBF0786FA864F07A9E8D5A7F07E3E8
+:106000007E8303ECA5D763EC03D36E49CF3011C771
+:106010007BD41C338ED729E8D72171FE630FCAC405
+:106020007F2F30B0FBE0B92D60DF05510E54BFB6B5
+:1060300002E355BD85BE9D28379F778E3F20039C88
+:106040005AC7C7CF5D25BF8276349CF7E72D50BF76
+:10605000E1BE4D5E5CEAB04DCE35C86EEDF3DFCAF1
+:10606000C0F89743D29E8F5ABE2DF6F982878FB71C
+:1060700065954CF164DB8A375D07F9BCBB91FF3352
+:106080008B3E8AC3304CDE5CA70E4586639EFC3592
+:10609000CE1777FFA63A42CD268F3ADF589CEF6A9B
+:1060A000F134E2B15A9B2FC6BA869227579223BF8A
+:1060B0002914EF8164B12C9423CF19B8DC0A9EE433
+:1060C000F62425054D1A3C8F9A2FA0E60F44E70BC6
+:1060D000FC5EE029CBC462DEE77ED64FBF413AD7F3
+:1060E000173C1BBD9467E3923149873519D8127A62
+:1060F000EFA72ADEBA26063DA8E55328C700C11F30
+:106100001632712E9BEAF8383A3ECE64B682E02A07
+:106110008B3518435EABE533629C7F2BE4749B7533
+:10612000DFCE0D87F07C8F1A28376A8B2EB401FDE5
+:1061300084E0093DC9D74C7DE7D65722D6F51741F3
+:106140009F5B8CA162BC876E87F14A50AE22BF94E0
+:1061500050FC82D547E05D7DEE3F841DF0FCC575A7
+:106160002974FF3C6F6D1CDA47EDCC4CF46033F8BA
+:1061700053C646D0830DE932067D388B8C340EFC35
+:1061800059AA26E2BD0CD7CB35289760DDFB162631
+:10619000913EAC99FFDEAC310057F6C994CFB265A1
+:1061A00029CFD39CF4EF3ACA1379FB31EEF75DF7B0
+:1061B000502DBD9F9421CA67D1CF83B2723D53C287
+:1061C000702E950B2D14BF997C413E13E9A75148C1
+:1061D0007A3CFA173C5E736DAFAC790F6D528FB697
+:1061E0003F60548F764646B7B6DE3EEFCDD353615F
+:1061F0009EF6A5FCE1F68BBF3B827070958EE22483
+:10620000EAFB64509341F14D399881F99B1BCC8C8A
+:10621000E4B96DBED98AF2607F7A3CC9BFF6DB2C47
+:106220006487AECB6F8A433BD9346F550A96238C73
+:10623000C1AD183BBDE6D52D37D92791BC55F355D7
+:1062400082AC1CEC81BB8DDCC8093EF7F45419E527
+:1062500025CF6799F4EA96A783F9D8AD95D6E1D40E
+:10626000B14CBEF97EF876BAB796B8BE701AA11DC9
+:10627000E079A37CD715417B465A703F366DB69CBA
+:1062800069A47C6B4C3282F90D0BFDCC88F58D65D1
+:10629000E6483E57F9E4FBF27F3CC687875F590E1C
+:1062A0005C69DC2BF17B413EE79BA1FC69D310F2DA
+:1062B00054F58F1F29E0FC8B6C4B7AF58C31A67D51
+:1062C000F5AB22CE67E5469EA732BB615A1DDDC302
+:1062D00004BB65CCE77B51DC0BB5A727D23D717BB6
+:1062E0002E0BE3BD4170818EC77BD2F87FED8DB957
+:1062F000141F6A93FC29C13CCC97F0B9F0FCDA0179
+:106300004789307F5B0E97EB2CE4B7E27D358CB389
+:106310003872FDE0EF05B574CCC81EA6F8859E78EE
+:10632000CF698C88B7635C1CE317D1CF4DEED5C223
+:10633000532E68E12A66D0C035662D3CD5AA853734
+:1063400015713B7DBA5D5B3FC3A9851DD907E37419
+:106350003CCFDFC222E249F0F75E7E441C68DD6874
+:10636000FE3E5F76F7528ACBB6E5F0788F639536BE
+:10637000CE91C54212E22F7369543CD6BD663F866A
+:1063800097ED0BA3E341FC5E02F0A1A947318A7CA3
+:10639000F0EA689E87DE3DD2B7BD08CEB3600C5FE1
+:1063A000C7AB1D4D743FC5DAD388AF5C225F69B0BF
+:1063B000BE7C8AE8401D0FF92218B17FE48748F8B7
+:1063C000A151BE37701EE48B60A4FE2CE936D0FBD1
+:1063D000AB62BEA1F843E5CF72718FA2E6DDF4890E
+:1063E000B1D4BC9B55225F705754BE4E9FA3361943
+:1063F000FDE7BEAE95F1B1F810F92E68E27C88E5B4
+:1064000006917F837C182CE27C88F5A6EF56786392
+:10641000D98B0B055DDCBF63C9864F22F6B7AC7321
+:1064200085065EBEEBE10D91F951F7E33F3008BF01
+:106430009E517EED52B19D2F4FFFCB2BCD0CCD4801
+:10644000DF0728CF96159C31F27BA75E239EEB4297
+:1064500061FF99CCB3F2D12FDB11E2F26C9D88374A
+:10646000345B1533C681993B5513C750E3114D4B2F
+:106470005CB654D847727F7CC16BA57CDCE1F91413
+:10648000DF48AAF1DCCEC632D653649C6B0662DDCF
+:106490008EC156C0E9F957D93341C7C0BE4D17F870
+:1064A0007BC9FDB0EC67248F2EE468EADB449CA333
+:1064B0009FBF2D0BAA703E8BDB49FBB031FF1A1E2C
+:1064C00017D4C6D14CE23DE7C1E33B34F56D227EE3
+:1064D00072E5F1B57139D385BC21C62F8C1ADF1A4C
+:1064E00073FC8171B5F1BDABB8374F714F183A2EBF
+:1064F00036D2CDE9699DDDDF85713183E07F6606A7
+:106500003A9988F280FFE9E3797EAEC1A18D8F19B7
+:1065100030AF0BFA3F97B898E48AFA3EB5FD99057B
+:1065200012CACB27F0FDE8A4C1F2245A8ED844DE6B
+:106530007CB41C81F93470D3C35CCF364B8A0FE531
+:1065400073F47EFE7FF1877589E3BBC8AECE8E778C
+:106550009A2E630FB7058263F1B975F1FEC578070E
+:106560007EF78E91694F94E37BEB8CF86CC58E2996
+:1065700073310FB64DF0EB13693AA2A7F4DBD3B732
+:10658000EA23E829DDE873A13D9CAE13F95FF887A3
+:1065900071B427D2B76D8C31BF6AD7A9B0AD01D61F
+:1065A00011718E6DC29EEE9FEF8ECCADFA8871D2C6
+:1065B0004DBEB1345F7FFEA398AFE587CDB759C418
+:1065C000C3D4F96C776AF76733FA697F36A187D449
+:1065D000F936E3FE62F0D515E713FE75FF7C7769A7
+:1065E000F76733F9697F36F53B1BEA7C2D3F6C3E3C
+:1065F000BBE0CF76F1DE973D9E7F3764A8F7239A04
+:10660000FBF3CCBD66942FED6ABC50E8BB7351FA26
+:10661000AE49E83BF5F97369B914FF3D77F8267385
+:106620002C3D87FA8D093B93093B93093B13E1D934
+:1066300035A7570D077AFCBB1D37CF9541AFCFBEAD
+:10664000FFF4F81C80DFD9F18BB932E8A9D9AF9EED
+:106650007E330B1E29FEDBFB38FCF4E93E07B45BFE
+:1066600082CFCCAD05386918D7CFEABAD57977B9DA
+:10667000B95DB97C751E8F6F829C453DD69CE367E2
+:10668000187FFCCAD19B341FFA2FCFEE4D5F100349
+:106690002F6AB97C75217F1EADC08998CFC648AFDF
+:1066A000DDA8BEC752A77D8F25296923D987712C04
+:1066B0006445399660F6D0FB97D71673BD70335397
+:1066C0001AB85FE12C10791CF4DECB4DE5625C6BEF
+:1066D000E52FB1FD669DE709F477FF79D2BCE1684B
+:1066E0003EAB7973A306DE3BDDFE7DDE4F9EFDB142
+:1066F000C46DE5641E8F9936CAC9DF7B8B882BA2D7
+:106700005D3C143E3F7573FF7E009F1E8ECF540F7D
+:10671000C7A7B537690D9CFFF294DEF4C7894FC354
+:1067200031F13508AF51F8FB939BA97EA01EED888F
+:106730002BE15BC5AB9A5FD82C390BC85E67199A01
+:10674000FC60C61467AC7B1EA4CF483D6BB47B19BC
+:10675000DAA38634C58DF9EFCD7FD1C7CCDB7315B5
+:106760008BF85E523CE57D362719C91FDF9F3493B5
+:1067700061FC59B64C23BCD426D5513EA67E18EBFD
+:10678000447F353A0F5D9F7C3BE509E96DE8614048
+:10679000D99FC7EC31235FE93F56925D4800579976
+:1067A000872E5F290F3D7526CF434F323A315ED891
+:1067B0009E688C9987FEAD9BFB5DFB717F69B81F5E
+:1067C00023FF6E88D8976CE5F7EE589F00F546AB2F
+:1067D0008F51FC5DECFF5B6107A9FD4D563F43F90E
+:1067E000A0372A4EB45FF4A95C7FE0775BDC31E22E
+:1067F000285FBB0DF4FCFDA3AC5CCF99B9DD3EFB7B
+:1068000037B1DF27282B9644BC2436DD0D453737BA
+:10681000EA78DE9DCA97732D46CA079C6BB1D3F701
+:106820006CE60221F6A446F4BFEE56FE3EB5ACD8A7
+:10683000919E7E7BED945FFE96E1B50097DBA766A7
+:1068400018E8BDC25312F328A983F35DBDDE94A9F5
+:10685000B8CC1BEA4FAF45762C18C3C84E7A75C129
+:1068600043AD954EF28FEA8A919E7D73A6A20F7773
+:1068700063C3D877B1FFF2042ECFD5FBA5E509FCA1
+:106880007DDE6B64DF6CECFF55C51749D5485F7240
+:106890006F0EAE2BA23FDD3345F49F5B3C81FACFF8
+:1068A000E6AFDDF5D27739CEA59DF9C8C7E87CEC17
+:1068B000B1EC29F4B758E4BD86901FE87745D6A31C
+:1068C000BFC522CE535A506EEB8E214FD432C33EF9
+:1068D0006EE442A0D78C8CB154AAF5CF7AF475A19E
+:1068E00018E7FC9038E71FECF7B4C36A270EF83DB1
+:1068F000E0EF3C84F8F872E1A9F4F1B0A5076ABFB3
+:1069000026BFC76EECFFCE16F97103B0F6BEB32DED
+:10691000D05B8CDF196088878911F98B62BFF625FF
+:106920006B52D0EF81B3F420DD7604BC236B0D03F2
+:10693000CFBF2CE4080B16D2F306B12E475AEB0C4E
+:106940008CBB382C3ACA7360CCAA9167736A53A681
+:10695000A6A10BBB9C291627FAF75DE41764E0FBA0
+:106960000D189F7CE73686F75F59699D12DA75FD31
+:10697000F388F7C657897BE13E5F2DED27C3D6EF3D
+:106980009731F25FD38273506EF53DC35794F19205
+:10699000B6DD91C6F31FEE5D181F7202BD672DEDC7
+:1069A000C24F4FB00C70F830A69F71A9D9D5827232
+:1069B000E657091477D6B7E7B320C8FBB0ECFB1B4A
+:1069C000C277C8F9902E4F6C169E5BB6289EECB924
+:1069D00076A97506F931F7E858AC78D1CE62EEA702
+:1069E000FC8F622BBFCFB54FE4F4631F3F72E1B859
+:1069F000ABE7FF77849EF949B293DE7F52EDA34D5A
+:106A000043F8478E913A215F845E11F833339F1922
+:106A1000F9452F7979B074C76BAFBD96CEE8535B5B
+:106A200048471B84FDA38E139F1FA2C678C543F25F
+:106A300052B27AB8BEB0FAED4138AF75DFE963CE35
+:106A4000FF85A0FB35D90FD9B17FADD3E7C632FAA8
+:106A50003D98969C7BDD783E2D33FBE995ECBA960C
+:106A600033CEDF613E56F028CF37D89F5D68C3EF45
+:106A700041590E1B64D365E2F146D027CECBD8191D
+:106A80004691AFDE7280E799B658CABA30AFA1C559
+:106A90009256466AD8C2F356D5FE16CB21D20716B7
+:106AA00085DFDF5A507F48B84CC04709AEEB10E194
+:106AB00043ED7750C85D8B1266F85E5A9CD24AFD52
+:106AC000CCB2D78379CAE63446F744662BF017E296
+:106AD000355FC7CC31F4C9BE62AE4F5A4ACABAAAB2
+:106AE000697D327EB98EB5D8CBECA4E711EFF07C8E
+:106AF000738696CFBF137857C76916F9B477AE4E31
+:106B000009D68EC33893F71BA4E716CB027310F592
+:106B10005AE2F8CB8E671A39D478FBD78AF1BE4394
+:106B200079AE4F2CB3E27806C6F7158DF7E1629C7B
+:106B3000FFD5FB7BC02CBD474D301D58D81EEB7DCB
+:106B4000ACFEF313F7F2D1CFFD6079BC561B870280
+:106B500079EC1E09FB5A5672E65035D5F0F8D30B86
+:106B6000C29F51FD927431F60B127FBF3F28C52B97
+:106B7000F45D0CE1A7A4C769F130F03E2D3F876FAB
+:106B80001A781EDE37694C7C874ECBD7DF1CFF3866
+:106B900045939F057CEC31713FC623DEA7F588380D
+:106BA0001DC2186FA0179D04FFF7C7891B9C3FC328
+:106BB000EFAC99408EEB605CC9E127FA3639BA5DDB
+:106BC000C8EF39E2FB0FD178FEC9482EAFA5477A4E
+:106BD0005C78AF519BD69B118BDF5F7CF84206EE51
+:106BE000E7C519FD793B74DFF4E269E7E602C4CB3F
+:106BF00011EDFB6FEAF84D47CEA7F822FDA5C0E5E1
+:106C0000DF2F4B3AB37125D98D0BB8DDF87FFA7DB4
+:106C1000B317E6733B7597A495CF4F08B91C14FCC6
+:106C200060BB20D3F743EE2AF2AD403A6A93AC0B37
+:106C3000502EE73CCCF3F29A1E5BD5B328067FB406
+:106C40008CF2FDD5C808BFBA7CBD91E45EB3253790
+:106C5000F972F728439FBB9FE4947ADE558F9879A9
+:106C6000BE8A8FDBD1E9BE7B290F263A3F65A87E1D
+:106C7000D5239D440F6A7F138E8FF2C57223C515ED
+:106C8000CEA18F81713B2BB733A2D75989C898C049
+:106C9000F163067D997460491C8E6B10FEDC0B6AF3
+:106CA0005CA4A1CCEC8978DE705B99B93A824E9AEB
+:106CB00019CF0F8E1EFF372355FB22ACB1630CA8F2
+:106CC0007F31C694269FED973B6478F2FCB4950320
+:106CD0007CCCE30E43E7A3C571BE2D237BAC0DF343
+:106CE000D2C00E5ED3B06004E2B74DF6BD68033C7F
+:106CF000F47E68A23CEADF0B3EED167C3AD4F9053F
+:106D0000D90130D2187B9C1DC497E2804EC6272340
+:106D10005F34E7EBEA4231F6795CECF332F67878EF
+:106D2000E4F7B3C70F89FE1A7B1CED6D4FD4FD4607
+:106D3000248C76B627863D7E4212F105912774C2D7
+:106D4000E0DCD50D7839313999BE975690C0EF5DAA
+:106D50004EA07F52067EC8ABA7F3D17E992DF57F5A
+:106D60001749F8438C60F047FE05F9620EF3BFB691
+:106D700048223EE2F735781B9F7EE573DE3692D1DE
+:106D8000BA36C0F9E1FD46DBC5F93362DD67A48E92
+:106D900052FD37506511EF13333C9D88FBAC41F732
+:106DA0007451F772786DD39F77AC1FDCFF8672ED5C
+:106DB000BDD9868B3C2E625AC2428F4B9897AA6DE2
+:106DC000BFA9CE107D2FA8B94FBBD96B885E0F7DB0
+:106DD00017D421D69BDD711FDDBF4FCDE6F944A648
+:106DE000658CE204D1F76DA6B15D1E3DDACF0D8C46
+:106DF000ECFDE83839E6A952FCB081B12D12E579F5
+:106E00006BDF7379A6FE73FE7D94D63A9CC70E762F
+:106E100010DAD3D1EF49A8F75AEAF751553CABDF66
+:106E20008F4ABF4D47EB63C129D4AEC6FDF17BB895
+:106E300055E911F9E42B587F7F7A7F2B187BDF9B74
+:106E4000DBEA29CF2073BC7F6C189AB2144678C84D
+:106E50005AC8C86F003C68F2094CD9DB699FE71635
+:106E600033364C223C68DA3340D3D3FDC0426D7ECA
+:106E700001EC530347FBAB57F2534DD9F99795F308
+:106E8000578A639AC4BDE49451E2FB97A5AC14ED14
+:106E9000A2F4DB9EA1F33807E781715F749C62DD89
+:106EA0003B6E82F1D18FFC77C12FCDE26E5BFDAEE0
+:106EB0000FF3C8F41E9B54CED72C0DF3F27BE912CE
+:106EC000467C6E8A6766CC8F972A4C1EC4BBC90469
+:106ED000306C5932327306D4EB453C7B8DC46484EC
+:106EE000995531F3F8A3FA5DA1107D5768A879D4BC
+:106EF000EF2BB2207F4E9D67D077F52EF33CF97BC8
+:106F0000D6E8E76B299EA9CE3F14FE87FA8EDEBF36
+:106F1000D5BC3781C7531D44AF8D03F44AF07C4183
+:106F20008FF83CCA85BBD5667B5729FA0F671E4C84
+:106F300050364A11FB08CED2F3EF037EBFF1FAD7E9
+:106F4000617792BCEFDF9718EFFBEE8BFE22E4DA5D
+:106F50003A7C5909F35E1A19E531A4FBAA3F972937
+:106F6000FF00F6A0911311DF4980F1D63DCEEF1F4F
+:106F700036E3773EF0FEE7C040FEED13166CF7D126
+:106F80007736D4BC5CCCA35D5B32F03E72F47D837B
+:106F9000BD11C689986FB2990513409FA4F43105BD
+:106FA000BFF3ECB96854A6037E6C7DA05001BF937B
+:106FB0009989EEA52AAD7E33FF0EE10A166967EFC7
+:106FC000976EA5EFBD86BF6494BF143ECF88EEC315
+:106FD0009FC3C4702EFFF8DDFB7AE4CBA97D5D7AF8
+:106FE000D4F393FBFCA47FF6D94F3DEDE2E7629921
+:106FF00011911F751D5B54CFE98A9F972CEA275F7B
+:10700000306AF8FDDA5EA3461EC8175BBE46FD6512
+:10701000EA89AA67D33FE3E3F928DE2DDBB5ED5318
+:10702000443ED0DB2ADF5FC3AEA173BC981633CFDA
+:107030006EE0DCD5736EE27174C6C7796E94F79F0B
+:10704000464D40FFC04771E864C42FD8172995DD2D
+:10705000CC8E7958E54C998E72BDB2F31DA487E4AD
+:10706000B33C0F3C7AFCFD5FBE95857EC39EC99DF7
+:1070700059682FEDF9F2153D8E57D5D3CBB03E1997
+:107080004A1EA4584C78AA10B43350CFE34491F56B
+:10709000B49E4AE765E5E4CF504E1A876EDF33D9D8
+:1070A000C2C2E4877526A03DC77C7CFE64B3CA5784
+:1070B000EC2F97705E84819FF654EA526A619F7B41
+:1070C0009E91156CDCD3F34602CEBFE7EC39CD7A46
+:1070D00098FE22F345ACFB5A71EE532B7BC9FE7E22
+:1070E0004AAC2BF96C2FC5A15395DE30EADBD4C333
+:1070F0007AFAFE37B3F0BCC8614CA1389ABA5EFC8C
+:107100006E2A3ED78272DE88FBB3325628EC7E2888
+:10711000332A8355988F9ACC764A486B532B7D41FE
+:10712000A4E7E4A59C9E93ADFEC318BF4F5EAFA33A
+:107130003845F259DF06F4CB92CB6505C9E44AF82D
+:10714000EC10F3B78AF9D4F9D5F58CA8F44BE87EA6
+:1071500024B3E362FEAE2A138EBF5ACCEF14EB5970
+:10716000C5E83B2CC967AD55E82F27839D41DF3328
+:10717000B8E2799A35F345B7274FD99945E7E0B199
+:107180001ED90AE3A5645B365441B9CEA123FF3270
+:10719000A987513C3DA9279DE47D524FA128278A0C
+:1071A000FA69420F703993D4F3502DAF6FA1D2A476
+:1071B000CA17873F8CFB98DACBB87C717849BE98A8
+:1071C000D2B87C51E9B856952BCC5A321FEAF70F4A
+:1071D000FFACB5069E7BF773FEFEE5BBD95CBEBC7B
+:1071E000FB25F7FB4D69BFD3A35CAA42C305FA4D4B
+:1071F000BBC0ED33951FABBA25361148639A83E7C0
+:10720000871FBAC89F3B84D9D500AF6312C929959F
+:107210006E6B05DDAEB3EA8349D8FE8189DE773433
+:1072200039CEE598C11EFE83AEF7417CEFF8F73307
+:107230007AEF5D41F5827E434B492E9A846C39E4A6
+:107240005860413E847948AE1E7218E9BC0E083A77
+:107250003E67AFE908C33F5BCCDFFC693ED4FFC1AA
+:107260009EEB40934C3D971E412F5F88F33B2BE8EC
+:10727000A629DD7B53C904FCFE621ECD7BCEFE0D2C
+:10728000BD7FB2DCF61F9FC6FA2EA73A8EFA7C4F5E
+:1072900068A519CFF5D09B1F9F40B4ABE35F237B5C
+:1072A000EFE4E37E339AF8D0123BCF7890FCF3AD55
+:1072B00088967F8B4A860FC8BF7A6691791E12E73F
+:1072C000EB59421E4D55B8DD5E6FE5E7555FB25F85
+:1072D000A6FE8A8BF655AFD28DF2E45AE47F9BF27C
+:1072E00024D14B7D3EA797BD829E0F0A7CCEEC63D6
+:1072F0009DE897ED2F986E190BF83EE2D213FF1C14
+:1073000019BBC65206CF1D2995F04B026C7AC9D61F
+:10731000B5A900CF5224A2A7FA92AD1D4DD07F96F9
+:107320003541A903F8E8F9B31634AF0E05BC8497CC
+:10733000E972F8E354179E1BC7D3CCCAB08CFE4F3A
+:10734000BD63BF8CFAF66DC4AB11E32E1EC1677529
+:10735000041F576A2CB88F23A526212F3DE3515EC9
+:10736000CECA37D58FA1757C7D6C4C1ABE776F5015
+:10737000F8953CA7FFC9827EEACC276B53A0DFCCEF
+:10738000926619D77BD42C91FC3CDAD744F993C789
+:107390003B39ACD22D3D077479BC6F5B7312B66F6D
+:1073A00097483ED52B2F1DE2EA8FD3A73A7E0F0BCD
+:1073B000B6E17730CF29AFB7603EF5B1BE05CFCC8F
+:1073C000013C1C7F533FC4B84D1FADC071DF4C243E
+:1073D0003A9E6D3569F4B18C4E69845EAD1E6FD3F3
+:1073E000C0F54A0DC5D3CF2992E50678DEF35DAD31
+:1073F0007B3991D152DA77BDE87B4CE17C79CCA125
+:1074000023BE3CD6F7B89C8AF05946FB919976DEAC
+:10741000FA921AB2AFCE295BF54467820FD5F154C8
+:107420003A3E8A4F231EED9CFF8FF66DB320BD1DA3
+:1074300075BF23E3395D67891A57D0A1AADFF05DD4
+:1074400071A49FDA51FBF37E86EB5138FE6B94D723
+:107450008F237DD53B64A2A7A3CAFE9A1486BF27BB
+:1074600062D2ECFFFE1DC99AF19775DA3470B45DF3
+:10747000B5CFFDDBA7CBC40E66A447D847F9C23E03
+:10748000D21F77E0FAAE681729EBE8F74906D9452D
+:10749000F9DC2E8AB68754BE6ED689B8AC8EC76525
+:1074A000A3F9DF58FAC3EEF1D82A498EBCBF5BC6F8
+:1074B000BA7390BEE6A31286F11ED075A723FC1501
+:1074C000EB6D8B07397CADCC7669BFBFCABF373F48
+:1074D000BED4771EE59574364CDF6165AB18E507C1
+:1074E000E86B789E115E66AD88D48B25FDF12D8DFD
+:1074F0005DA44BD89B8578AC386BE4F18F9EE8385F
+:1075000097EA1F8525F22BAE522EEA93F9B87BE657
+:10751000F078677F79338F931509FCE5941A695DDC
+:107520008A80F7DC16FB9EB5A454FA41F9A2DF0766
+:10753000DF2980EFAF90E6619E3D55B1D79152CAE9
+:10754000E3B5779778F24AA12C2AF11596225E3D91
+:10755000605FD377C53D649FA9E3BC33CAE316FDE2
+:107560004661C9BCDC0E8FEE07ED63689C86D8E3EC
+:1075700040FB387A7E6EECF643B839FC7D23FB3055
+:10758000D243060C64A6F2522AE3E516FAAE468808
+:10759000FBE70D1ED2F34691AF88371091FCC7F47C
+:1075A000F534BE1C9E41F7582DD82583FBF9917602
+:1075B00094AC846A22E3AD6AB9A894DF73CE28152F
+:1075C000EFF34C6013C8AFA8BCFC3CEAF343CDC357
+:1075D000EC6557C87B5EF363D349FAC3E4275FA524
+:1075E0007D600E4A91DF391F6ABF894A941C8AC2A6
+:1075F000D350F35CED79DC22E8F66AD75D657ACC8E
+:107600004EF9D12ECE076B057DF5DBD53F1E3FBE73
+:107610003F1F86FECAD9FBFE93F87E4A4268A53713
+:10762000C67E5E14FBF931E5C1D370CE1B8CA1FB85
+:10763000D1DE9907A76302D27BC7F2F1F005B09EB5
+:1076400037C5FC2D9695EB6F85475B1CBA98F91EE4
+:107650006FFE787AA20D3FD9FF95E3DCFB6D20A782
+:107660005B1E7DD0ACB08175306BD915CEF947E388
+:1076700013755D6D5B305E624DBDAAF7145A5CAF49
+:1076800024E07D69EDE74D76FC0E46B43DA0C6438F
+:1076900054BDA5C64D54BBA4C2C1E31F33EDFC7B52
+:1076A0003D15F669A4DF0FB2AE1AF2AF303B6D2282
+:1076B000B10AFD19DD5AFBE43ABF57463B2ADA9E70
+:1076C000A84D3345D907BD7A94DF1517B5FD54FE93
+:1076D000F8AC54C45154791765479ACF9F4940BBC1
+:1076E000EBED0B67282E148D9FEB2E5CDE9FBDAE5D
+:1076F0005D4FF783D171ADB72FE4D2FDA011AF1B61
+:10770000C1D4CACC3FC48C80974C7B6B9511EC18CC
+:10771000A38329F8DD36FC5833C60D8D17789C7C81
+:10772000849DFBD7898BC12F85513395A07DC1786E
+:107730007CCE48EFD3995DEF91BDBD09EA86219ECD
+:10774000C79E19A68B110753CF638AC0EF6EE6B7A9
+:10775000E3EF814DB18BF7F72E46DB59FC3C2DA2B0
+:107760007FE2622D3E2DE23C27835B43DF79ECD341
+:107770003E6F11E76B591AFB1CECA3639F43A27A7F
+:107780000E13B6C5E1396C59BC4D8A750E998B2F15
+:107790007F0E5B845FA9D2EFB4AC04B2AFF7A6E86A
+:1077A000E8FB417B13C359CB31FEFDB299DECFAC70
+:1077B000107136B4A4109F6BB797BF8471DB71A3AF
+:1077C000F5748E7B25D1FFBC8EFFFE60CF78EA1F5B
+:1077D00027B383F8BB8007FBAAE9BB1BD1FCBBD353
+:1077E0007A00DD33B6CEB93D6B019C8325FB8099D1
+:1077F000FB9B83CF07EF3F4A05BE4B7BF8B954A6EE
+:107800009DD4A3BD5EF266ECF351E38F7BA49D3A59
+:10781000202B36AAAF8BFC98913BA3ECE9B32D64E7
+:10782000675BC647D5F7C039D1BD8E9FEC16D9A18D
+:107830003DAFEB8738A74A1187307F7D8AE265FB31
+:10784000FA4E717EE9D1C62527F75DFE9C5E13E7EF
+:10785000B453C4A17E2EE2009DC27F7E23E0A4F239
+:10786000CD809BEADF0A2804EF0A940B61C1CF7731
+:10787000563ECB4717AFAA84FBED47CF73BF7D7F42
+:1078800062A883BEEF74DE42DF17A4BD4D14BFDBD8
+:10789000077C722CCE49BF1F7834DB4CF1B3A3A513
+:1078A000BFFB7B8ABB7C6BD1F1B80BC7B37A4EEBC5
+:1078B000704E186F5D858BEEA536E04714A1FFEE84
+:1078C0003289BEFF341B0E04EF45543A37F569F197
+:1078D000590FFF6595F1DF1DC8427F618C8BE8A4CD
+:1078E00042EF73223E37BA4F915F1E57D8EE1B8787
+:1078F0007180F17A26BEFB143445AC3B0E6F42E03A
+:1079000079538944DF731A0ABFD1E58654AE2FA399
+:10791000EBFF7534D7831BDDDBE83C773BBAB25015
+:10792000AFEF13F910B3642948BF5F2877DDB11CAE
+:10793000F65B91651FBB11C02DA35368FDFB4A4F39
+:10794000531CF8D88557C621FD1DB3765A30CE7921
+:10795000CCC9DF53871395F97BB79DF22D31F2A483
+:10796000D5F258E922FAFD957FFC7CEFDAD17CDF75
+:107970004C52F50A8C5B81FB4D42F9DEB202F9C331
+:1079800098B983FCCCE873AA705FB388DEF364FC1B
+:107990007B4FBFB6862C783F1CED67027D6C42FFA3
+:1079A00078F7043D7DAFAD5EE6E782E788E7A41F88
+:1079B000A3137E99767C66653E63FAC079601DDE0E
+:1079C000D7D03AF13EAAEFADBF9262F8B583D6C9DF
+:1079D000FC9E58F9B0D1CFCD76B2209A86B3151659
+:1079E00076A19F70309FC6996DE5E3CC12717C9BA8
+:1079F000A0FF59177594DF81F4D680CF95CC2779F5
+:107A000072CCF550571DACB71ECEC641FE469356FC
+:107A10000E09395B5F5245F7BDC7DC07C6A3BEBF81
+:107A2000BE74E5E13227C29FD45441B729A52FD5B2
+:107A3000205D5A942E8A2F4C76CB745D787DB936B2
+:107A40004ED1AF17A3F44BB4BEA88F923B11F7549D
+:107A50004E43C4F9CF729F4B88A483ABC7CB1C2F76
+:107A60007EAF7BD6051EA71D8C97F7E973A503781B
+:107A7000893EEFD878893EA7013CADEAAACB1D8CA0
+:107A80005F156FBF2E79C91A99E71B8DB71F8AAF93
+:107A9000E6D15641AF5C9E5708BE7D3B3B4471B773
+:107AA000B74BF9EF4B1D73FF96E2BFB358A8630DB8
+:107AB000CA45E0CB3942F9E823E44C341E06F8F419
+:107AC0003F282EBFFBF3B7282EAACA2113F225EABE
+:107AD00013C11FEAB999901F916F2FF0EF875E2DA8
+:107AE0007FA87C45EB213F38A48FCC1FFCDFC55F0E
+:107AF0007B71CD18177616523CB8CAD1A5C77BAC9E
+:107B0000C950D23D92887FD23A9C91F53C6E1C5967
+:107B10004F712FA1F7D4B8A6DABE3EBB2B41185542
+:107B2000A4474DC2DE51FDC47D8E53647FAAFA5432
+:107B300016F7FE57AB4FF7087D3A54FBDE73BB795F
+:107B4000DCE7CB433D0F801C9F9C6FA4EFB84C0E2D
+:107B50003FCCDFA3708449FE6F7437911F0CFB6923
+:107B600046A304E67544E6F3A9E5BEF36D0AD6EF35
+:107B700095BBF40AF507FF16E0038656FA9D860DBD
+:107B80008F737D1357F451D6E5DE83BAB34F99E670
+:107B90004AC2EF616F5F83DF010B2A8CBEEB98B5A1
+:107BA000B48B45EEF7A531DCAF9D9CFFD61D076871
+:107BB000DD1FEA69DD6857039D4F969D0E05E7CFEF
+:107BC000F6DB23FDEC7DD9F7DA9D00B77C696C0804
+:107BD000D17AC3A37E01F3EC33578D074B8DED7340
+:107BE0001F18F50BC0C74673D504CCA3ACB6DFDBBA
+:107BF0003E1FE5DAD95B2660FC1BECBC56D4B7838C
+:107C0000F6DFB7CD8CBF3B5DED789FD631A2AFAB31
+:107C100006BFBF5AEDE0F748BED1BE87C64C407BD9
+:107C200039ECC1734F349F0C22DD4C16EB65172FD6
+:107C300051FC41BD97D9739ED347FFF8400FB88FD1
+:107C40006BBF5C45F722B97DBAF926A0D5757D3C9E
+:107C50007F0CDBF17BE058BF28861D00F35CE74B0F
+:107C6000C6F3EBCABA3786DECDEDFB36E083E7F626
+:107C70006470BC44B76F1EC3ED82B8AFDECF7292A2
+:107C80003DC0F57FB0C012F33B55B7A9FAD21A3BFD
+:107C90000F452D5579A5DA23805FB32102BF9BC61E
+:107CA00070FFFD7CA9A703F1F77DE77F0A710BE563
+:107CB000F152CFF631C391AE045FAD9763C601EECA
+:107CC0001CF3A3C52B6E4113EFABBE73E96FE986BE
+:107CD000A6DB41746550E9F821A2E3FF8BF47BE257
+:107CE000FBD0EF207974FE14DDC347D3B14ABF0344
+:107CF00074C8E69B9206E87928BAC17E8B9206E8A2
+:107D00007AA87EFBCEBF1F93DE07C6E9BD2CDDAB94
+:107D1000F4B759D0917A0F5429CE79FDD78CECFE67
+:107D2000A33D46F577C6357E11E83FCAA3AEB072D3
+:107D3000B97FB43797FB193D66BA9F9AE95E29BEB1
+:107D4000BB0D5D23C6AD11F27EA6DB755939AFEAD6
+:107D50000B55DFFD4F7C774398008000000000004A
+:107D60001F8B08000000000000FFED7D0B7454C75E
+:107D70009560BDEED73FA9919E3E881692A085C022
+:107D8000164640EBFF053D7D10321FA7C1180B9032
+:107D90004C8BE0041B49DD60E2903D9EA131321224
+:107DA0009FCD621FCC7866BD390D038C9DB177C025
+:107DB000561C610BDCE237384BECC671189C4C3C0E
+:107DC000C243086C6CD318C743B24ABCF7DE7A0FC3
+:107DD000F56B750BDB43EBCC6457E740A95EBDAA9E
+:107DE000BA75EBFE6FD5D37A3363CCCED817F85380
+:107DF0003DBCAC081A19CB65F4F305FCDBE2F2EBF1
+:107E0000252B63DFB9EECBB443F9932CDF0A671E51
+:107E100063AF5F35CAAC88B1AEA9E3F6EAB387FABF
+:107E20008F75088C15437B12748676EF54C17700EA
+:107E30001E31D1272E9D1E7DDE9F4CFDAECD958738
+:107E4000B3FA329D63687AAF3E8DB159F89B0ECA82
+:107E500020932D33A0CCED5AC712A0CC2CF9369626
+:107E60004C622EB1843193F29EE9CA6BDF15F03972
+:107E7000931983FEEB95F556307F5D0DC031CFCC65
+:107E8000BCF189387AD3C9C9D05ECD970AE369D7E6
+:107E90001DDE9FFEA529F3E430362E57A0F5CDFB5D
+:107EA0008CF94CF06B756EEB023603E78771CCD121
+:107EB000C7A9601E99E9011DE55EDB2AE83F6BAAB0
+:107EC000C9E1E5AF4BF8DE6CC6DF1B3ECE7AC64A91
+:107ED00086C6D9E209C8FA54C68E494CE92F5B6FB1
+:107EE000C167E7F8C37A85B23E536ECD55C4CBEB7C
+:107EF00092C7E10778670F868D6F1DCB583A63559F
+:107F00009F699F8B0E6D7D385C30FB58FAE54F5FA3
+:107F1000C07C4633C78F395D47F8795D32FA903EB1
+:107F20002AAED4EE6293184B96EC87FCF0DC2A99CB
+:107F30001D3E053633F6537EAFB8020404ED9FC2F2
+:107F4000BF1480739B6EEF5A27D0DD166C4C1FA2B6
+:107F500097250B4C1A38962E49D4D49B9AC769EAB8
+:107F6000CB574FD4EC6F73DBDD9AFA431B666AEA9A
+:107F7000AE274A35F5559DD59AF156EF9CAB69FF72
+:107F8000D6EE6F68EA6B9E7F50537F74FFCA11E98B
+:107F9000221A5F88B691E98979053BD2BF884D3AAC
+:107FA000FCCFC59CD3A3F7F7217FC27EBD6EAFB7D0
+:107FB000AD82FED5573F8DE7FDB4F4C5BC7200F924
+:107FC000A356D91798C72B407B8D52AD95BE45F46B
+:107FD0005E633645E41B95EEB60A5611C7AF66DA06
+:107FE000FDAAB06DBDAE477E2E1AD0EB61BE5937EB
+:107FF000B5FC572135FC06C767CCAFC7F584CBA5C8
+:10800000FFEE18937A399E60B57F01FCC4ACC98C31
+:108010009547C7A34AA7B75D37635F6FDDCAFCEA20
+:108020007A2B58A00EE93EDABA673BFC7A926B5184
+:10803000D61DBE5E15FEEF6F865F81EF5FFF23F3F7
+:10804000ED1310DBB288FCE6DF5DEBCFB52B400211
+:10805000BC27157AA8918227128B900E980365830E
+:108060007190F9510ED433C16F8452961C04AF380D
+:1080700068EF34302AEB717E711086A6D245EB355D
+:108080000ECA8D286F452CA9EE9CC7EB8E065E8725
+:10809000F7A82ED5F2BAE73E5E8792EA5E27AF4395
+:1080A0003FAAEF5A8CF5CEB8C0894401EBBE2558E3
+:1080B000370E1E5ACA4BFF05814A99E49638E85D8F
+:1080C000A7A77EEC22AF073771FAD0F283315EF6B4
+:1080D000F9B3195F3D3C3F81BF4DC2FD5CD76F00D6
+:1080E0003CD48A82C30EEFD50C32873F15F7D5E416
+:1080F00090D997E033A033316D88CF8C2C98B14A5A
+:10810000203E790FF1ADCAEDE1E368E9AB1EF55A07
+:1081100001EC3BFCBE3119E530A7A7FAB2E0122C06
+:10812000F1F913D03E7B32FC4B1E4E1F2A5CA2326B
+:108130005FA5B55F8FAAB6321826B75917D15985F2
+:10814000799D2CD987CB6D7150E52F2E2FC2E1562A
+:10815000E5AD391FF86C1AFB3A7C96B90A6AB3AEE2
+:10816000BEABF0D9BA303E93ADF79684F019103219
+:10817000D3F0D9B7899E6E275F4E09837526184FB5
+:10818000F60CE823CA9954C04342243E9BFB1BB221
+:108190001FA2C89737F01758676E7E989C51F45C01
+:1081A000B5AAE7FEA8B3A2DDE2677A11CB707CC85E
+:1081B0002C3B31D273B53CBE0906BA6BA80EF890C1
+:1081C0000F81BE631F15DC06CF9BC9CE62B85A80F3
+:1081D000C7AAE2318C6EAD712F9D90ECBC05F5EC19
+:1081E00018856E4E66A711DFC376BDC742E49DB504
+:1081F000E8CBF101CD3709C7736622BFD540DBC696
+:1082000082E1FD33B10FF09935C87C3E78CFEA08A2
+:108210000858AF46FD9E8DF4CFEA51FE575F09E83E
+:1082200025EAA5E5975B7400BF3F01A4578B7C51FD
+:10823000309C2E64E6D3E37E7CD5FDAFB61F349030
+:10824000BC0EDBFF9A41B0CF004E39D5E420FA1ABC
+:108250006464CFC84EC1C748BEAC21BCA8F6E3AD2C
+:10826000F6266817E8912E627BB340F6D0A76CB370
+:1082700081F305F3FA557A86E7CBAF303911ED3447
+:10828000CBF3D47E6C1323FAA8B6973C556747B856
+:108290000676CC44B824BD0A973F15C7BD60E2708E
+:1082A000F9DA087FD50AFEE4411D3343BBBF4F69AD
+:1082B0000FA35FFF20B7D3FC4FC42B70DDC8F04382
+:1082C000BF07D04E069368E5DD03FF4384F7DC6902
+:1082D000773FDF015DAE28F0FC6F856E3FDA2451F9
+:1082E000B93ECDF5FD7CA0C77F916E7CE266C80FDC
+:1082F0003944F7D5F6CF27901E52F1D93786F410BE
+:10830000C24DF8E8B34483DBAA107538BC0ABFE558
+:108310008CC8572A9C2A7C577C7AAB0BC67BB3E768
+:108320005F131CF621F84B45E77E84FBCDC14F67F8
+:10833000B888EF9235766634F96652FC88A44C967C
+:108340002BA6A23E8873CC85758CCB74D1BA4C36E3
+:10835000A31DFD024B2793F360487382CF8CF0F787
+:10836000A737ECD243FBD6A92233C1FB5BB3BC36A3
+:108370005AA7FE0986EB9993E96103D6E8F377657E
+:108380003E29119C835047BFC7C6F1A29F68F4F8ED
+:10839000E0B95FC7D61C0AC1CBC102EE8F9DCDE705
+:1083A000E5DA171ED97629843FDA0FADD3D4DDBDC7
+:1083B000DFDB762954DE6E1044DC9736858EDBD900
+:1083C000C004F45F5A453BE1A143379086F56B2C1E
+:1083D000787E0AAE0FE78F00FF3FE75B623DFFD27A
+:1083E000A950F68FE1FE69FF241FF90DEAFC1F2B4F
+:1083F000EBFF385F177338A6011EBAB3BFC5709F75
+:108400006A6C7C3F4D50727AE67243F577869E73B4
+:108410007951A53E0F3ADE73121DE91CA8764C99DE
+:10842000F611E97D27D2BB71A8BEB548D7E88BF01D
+:10843000FE730522C17BC016B93D5BA1979D135CFD
+:10844000DDD9E8DF3FAB736C8625CECBDC3A1EE589
+:10845000FD56DB7AA253E6E2EB58C038BFCECBF430
+:108460007819E8D179FEB782422AD68DCCC286F837
+:1084700057F50BE7893ED101FDBBF2D79971DD5D60
+:10848000B6F5661CCF84D6826E383CEABA0FECE6AD
+:10849000F3CECBF489E0E9B2B9B97BC501A83FA31B
+:1084A000AC7B5EEE3A6AAF6AF49F14097FE06743E3
+:1084B000DDE868F5E23C2687BD46C23A736CC6B279
+:1084C0004F7889EC1355BF0DE94FAD9D72FABA9103
+:1084D000E463D7159DCF44F2535E3007DE9FAFBCF7
+:1084E0006D0D727BBE6BBFA35FC4F71C02F9E3F393
+:1084F00073BF4D769D35772EB7E7B3567991549873
+:108500004FF0A13F314FC55B9E565F191D17B7A0B5
+:10851000FA30DED4EAD1592CC090BE2AC2FCF370E6
+:108520007D3BBB40B1D7725931DA2B2D26DF63C8B2
+:108530000F960D423AC2A1E27545818EE820867CF5
+:10854000B06726945DD965B4AFFACCD31704985FB1
+:1085500017DF6643BED0DB8C7EC41BB38A1F0DA819
+:10856000F34DC2FF3325B2B7B08E842F7D3979FC2D
+:108570006E96C786EBEC32B0A648F2A7B680F3FD44
+:1085800007597E920FD1DA8D1B04D27BAA7C376605
+:1085900032D937C278DB8C5CCE805FD22B40BF3EB5
+:1085A000A417A0FF175AB3F7E905A27B19E5F1ADAF
+:1085B00052B1EF120BB91FFE668189CA93CA7E546D
+:1085C0007F7136C33582FCAFAAF23084DF94CAC70C
+:1085D0003365F2F14C222F7395713F2EE27CDC5C07
+:1085E000147BB95F9A337AFB1C4B7A8D87522890A3
+:1085F000E879DD9887492EC5126F39A38837A35DC6
+:10860000A13F07A713B5FD7345DEFFAA20E674B2AC
+:10861000B47214E5412CE9A4E2CF83DECF97FF7951
+:10862000EC47DA68AEE3A399F2D442E093BF9C2E04
+:10863000DF83E596D723DBBBF3632F77D31E8072EE
+:10864000F104DF3723E9B37985B197FB4BD1BE48FD
+:10865000E1F645F8FCCB153D144B79D20465B31116
+:10866000D61F01FF8F8EC2FCCB7350EF727B81E56A
+:108670009EB9A40FB1DFE167B22EC43E067B141C85
+:1086800041B443053992DDED8DFD7E2D7D483F647B
+:10869000AFCC615C1FA8F32F2CE1F87A7A14E0B01C
+:1086A00000DEEA256EAF9BC2E050CBBF2D8CBD7DB6
+:1086B0002AE943E04805BB1FCB0542447BAFA7D066
+:1086C00018737E1A0B78D9E2608D91E4C9C9D8EF8E
+:1086D0004B9A0DCAAAE9CED328D7964B87E7605CA0
+:1086E000F9FBF81FE61BD279BE61A5C1E545FFAED7
+:1086F0004BB23BBC768C47ACA2FACA7CBB43AF52B0
+:108700003EB6DF947CDB056CD7517DE5EF241FDAA4
+:10871000C3DF17D69DC9C6F136EB1DFB18C69D9564
+:108720007C838DE71BAC369E9F106D3CEF60B529B6
+:1087300079071BCF3B586D4ADEC1C6F30E569B929C
+:1087400077B0F1BC83D5A6E41D6C3CEF60B5297908
+:10875000071BCF3B586D6ADEC1D33815E391369EB7
+:1087600077B0DA78DEC16AE379079897E71D6C3C49
+:10877000EF0070F1BC832D72DEC13A947720FFF1D7
+:108780001896A467B85F7F54A9CF067BDD34637861
+:108790005EB56AE7FE2D1817AB0972FC5539785E95
+:1087A000D914B4770A307E4566B0DF04FE65451102
+:1087B000C3F0D5B0F9C3F313DDD9E7BD02FAA3B016
+:1087C0009729BC03E529EA187F3F7CFE6171573B7E
+:1087D0008FE7D6657E8BF03BBB2C4878C3E71887C4
+:1087E000AD53F213B556ADFF2A7FE6B2F9715F992A
+:1087F000D49908F890456DBB88F92F8CBB5EF1D7F2
+:1088000061DCB76A501B7715331BD4B83CCF4B845F
+:10881000C139DFE11C5F046B6A017F2A01E6CFC129
+:10882000A415AE53127C5EA4B7DD1B88BEBC3B45CD
+:10883000C71468AA0464609EA512206A86D254C632
+:10884000ACD24CF29B389DFED7D4BDF1D9280F0392
+:108850007A46046C233CA8F9850458BF3483FC2B6A
+:10886000F2EF2A33FDBF473A50EB82CCF338825DFA
+:1088700062CD802FF96E265C3693ABCE906FEB45C0
+:10888000E635C37341E9379B05294E2D3389F276CE
+:10889000B5CC4165D174576911F0A3CEEC75E17A7E
+:1088A000AAEC6609F9853DEE3CDB48F1E47AE93251
+:1088B000E04900F6F862DA48768AC82EABF81C4523
+:1088C000BB481F2F7822C9AD8AD8EB61B2832A0A30
+:1088D00019C9C72D2CB2FC7CAC84CBCF374B5DDFE4
+:1088E000443CD7FB16D58F872E8FBED04A799B6D1F
+:1088F00061F1C25BFD8A626F4724E7903DB901E9EF
+:108900007AF1048F0DE18816C7782AF6F0EC491B3E
+:10891000C1AE7B7614EC5AD443B7EC2AFB9993FA98
+:10892000503BCAB10E4FBAD0EFBA929038AADDC30D
+:108930003C14678D1CAF796914E22099A8BF13FE1F
+:108940000B9D63EA3A02FB87E5FBBC54E1F88E42DB
+:1089500087E34B63CF17D3A0D4273E610B8D1B77E2
+:1089600059040E9741D0C0F5B962FFFDA024F678F6
+:108970002A81727DA9FC2EF261D574F96758AA7C10
+:108980003BDFE1BA40FC292DAA4F02F9BC667F7695
+:1089900001EA8906DB5EE32A80F7D552F9FD223A27
+:1089A0006FF41F5B1E6EB11E8F47BCF7B922CBA3BD
+:1089B000BB1109C5E44FDE28E2FEE467848728FE88
+:1089C000E4AF8B63BE2F7BEA7386FCC970FE1F5B2E
+:1089D000CCE39D6347018E06285746F1EBA68CC277
+:1089E000FC8D5ABF6EBF3E44CE104185E6696CDCFB
+:1089F000AF6311FC3D9735BABF377B14D6B110F386
+:108A000071B591F5DA7DC531F7AF967E03CA0733AC
+:108A10005BFDA9D0C4BC306FDA50BEB2C9D5AF0F70
+:108A20008D733F38E1E037E508707EB338E672F2C7
+:108A30007C9C1EF975BD19E1E96A067E8DB05F2543
+:108A400025DCFF9B3BE111968876633A43F711E4FE
+:108A500009CF3736297E6383A27F762A72D4532CBE
+:108A600052E92CE5F5B951E8FAD7CAFB8D4A9CB614
+:108A70005162F22B91F47FECE9E6FC3828E7C671ED
+:108A800038EF0DF3CFDF53F4C49ED8D3CF9E0CA0A4
+:108A900093B9B591F17530F674B17402CCBFD4F6C8
+:108AA000F41C90F8B02F9B0D945F9C2EBF580CEFD8
+:108AB0006D8BC2579F2B7869863E3AB0FB5BA03422
+:108AC00042F91090815440FAED55EC6F018E30144C
+:108AD0002004DEF1E8E7F43AE41E7CCE5C6DE47F2E
+:108AE00084C81BCA9F569939DF74A783FF88FE0E7E
+:108AF00033D33993AE20CF9F7665F2FC68383C6A59
+:108B0000FEF46F458F19CF71776516C485F2DDEBE2
+:108B10009B98266FDC7585E785C14F8AD3FA49C9D2
+:108B2000E427858F9F90B9745EA87F24C8DC1F025C
+:108B30007F26505C3CE417A9FECF987CF95CF17F5E
+:108B400002FD1DCD9F1147490F8B30073EFFDD749D
+:108B5000F9DF108F23D0D31FA3D0D39FB0DF7F3492
+:108B60007A62CC11B768CCF071BBB21EB7B58E700B
+:108B70003F2021D31991CE54FA027A9B503276E8E5
+:108B80007D21F3B44A6F134B8ABF3EBD5DC0BEF07A
+:108B9000EFACE1AFECD649D1FB9DB57ACC280FFA0A
+:108BA00032D79BF19EC4D4992E07CE6B11996C00DD
+:108BB00038BB5C3E339E7B003B2FBF6484BCC1CD81
+:108BC000222E3F7EADECFFDC099CFF2A960BBE7D7A
+:108BD000C07F4D6C9701F74D7DFF5849ECFD887BB8
+:108BE0007248EE35968C20F75E56F8E273055F2BDF
+:108BF000DAD629E7995844FB6755ECFD8C342B9461
+:108C00007352D745A4E35B7487E78522AC6714E20F
+:108C1000E0E7C7E4E03C4CCD2B6D40FC3E56C4F190
+:108C200017CDFE7D6A14FCB38900D74AF69901FD81
+:108C30006959FFC7AC48E7118E15D9399C069003D6
+:108C400080DF9559BAB731FCD995A4B587D4F767B9
+:108C50002BFEAE6714E467520ECEC3F11A7E0E4CA3
+:108C60002DCFC53E1EB0B488FBB9FF80FC0EFC734F
+:108C7000A8A458E3E7FEA864643FF7B57F8FDC1A29
+:108C800050E8A8CB11D99E7D21F6FB40E7E060DDDE
+:108C9000EF7C15B9116E6FAAE59ED8DB7B69597A16
+:108CA0009C87C3D1C8B4E7246EF1DF28E02D5D8F27
+:108CB000F368E97725E3FA5F85C3581AF3738CE705
+:108CC00067E831FFC3F9797DA92BBE94EC368F1983
+:108CD000F537D80714675FB939251FCD2AD8676BD8
+:108CE000A996BE934A47A6EFE4D23B40DFAA9CFC7C
+:108CF00017614C53A8BC99A8C89B69A5B1DFAF29DF
+:108D000018AF488E2CAF2B631FE7DB73774E747957
+:108D1000AC9E37FB47411B4F6EBD258F634E4769A5
+:108D2000A9FA2179ACEA87703C8D865E480CD10B9C
+:108D30000D51E4CC68C03136041FB59D02E5AF98F3
+:108D40008DF9A6C0AF9DD839E4DEC7965188134F80
+:108D50000F8D7FC860AF47A0E3DDA5B1CF7FA3BC77
+:108D6000E9377CDB36D2F947A3D5C5283F6273319A
+:108D70003BEC9FB1B395F2F6C605AD9487669D02B4
+:108D8000E5FD98F42EF979AB6CDEA7307D365C9E5C
+:108D90006C8D395E8B72D897F637C5287ECDEBF88F
+:108DA0004A3AF937AFA33C1524EE47B30DCC4EF742
+:108DB000A4AF7CB9FB582F2012302F9AC4E83E761E
+:108DC000A7E1C77ACC471B053EFE5CE6E7F94F9763
+:108DD00077FCA3F09EE5A0317F3B547F519A4DFB79
+:108DE000DE69E5CFBBF69BF39F84A59EB6159EC1B9
+:108DF000F3E153A727531CECC5038F6BECEC5ABC73
+:108E0000C7807EDF0B1E867EA229D33571243B9C52
+:108E1000317F92AE8C509AA8947A5EFA059D6DF8D7
+:108E2000FB3BF7F748E867BD78C04C727FEA819E4C
+:108E3000F85521E32796713EB6063DFE1900AF3581
+:108E4000D3733209EF1D2BF9739179CED4C22B6302
+:108E5000A4009D0FDF91576B0EA5BB2EA9D64C79B0
+:108E6000E45C9D638A1DEBFC1C43FCF4DAFD82404C
+:108E70007EDD2E1150EF9AE1BA867AEC0D89EBC3B4
+:108E8000A9536B49AB752AE71E76E42D3980EFC7ED
+:108E90004FAFA7F13B59647BCC58C6E5F08B0699E0
+:108EA000E67DF18048E7C855BCDE697CD6CB300F43
+:108EB000E0A3DEA6A77BD8A78D4E11E5D0E93481CB
+:108EC000ED822DDFE97885EE99EC8802EF2F4AB923
+:108ED0009FCA6CA9447FA7F7772E8F747E5FA5BFCA
+:108EE000C93364A90CEDC0499E2694FFCCB6E43684
+:108EF0007CF124DFBF4387E6CF03FCCF7DC17F2217
+:108F00000EF7216BCF785CF707A5766ABF450F1F78
+:108F1000BD42F4B0C5C8EFE37875718E03B08E859D
+:108F2000D60111CF4F18528394E76D2AE3F2748B68
+:108F3000CA0F63811FE03D7D06BF07C526DAA9CEB3
+:108F400026072784DEA39E55A6AC970532F1F9C209
+:108F5000F87737D81D8C15F6A6378BB0FE8589EFCC
+:108F60006EC8867A49EF785ECF78F7B36C89B1B274
+:108F7000DE0C5E9FF6EE6793A05ED19BC9EB953049
+:108F8000D478B09B7AB39ABD7938BEA419BF150FB7
+:108F900072147FFD526FD2458C5F3528EB871F031B
+:108FA000CEE3ECFB473AEFE2345BFD782E83C986D3
+:108FB000B0F8193485DC7760A90924FFD4FB0BF3E2
+:108FC000457F3FF6D799FD84DFBB5927D97380AD24
+:108FD000DD5F147E797B2E5CEE6DD9C85C784E8C9B
+:108FE000B16609EF33084CD67DC1E3784E9C5F85AE
+:108FF000479D7F185CB0B5C89F43703D4FE3A87094
+:109000005DCB377951DE7A6B59AE27044FD784E0B8
+:109010000F186C45DAAC1D0FE13E5D1B139C204020
+:109020003DB97C1BEDDBB5B1C11F088E90BA81EF55
+:10903000635B6F09ED639728B7219D9B8CD66E21EA
+:1090400091B1EEB884190CE6D931D6E5C57B6E40F6
+:109050007774EFD89B65741C0038EB8BB4F9A1C70B
+:10906000153AFB83220FE6987679CE015DBA7B0430
+:1090700086F770DC83378CA8FF16F65D3462BEA4D9
+:10908000A3E7A211E9BE03EB304EC7F3C688F96F20
+:1090900063B95EBD2F4AE791D64B1C4FA7B2EE7A5B
+:1090A0002A15E0E9582DD0BDBCF54792E6607D7DDC
+:1090B0002BAE92B1E55587E720B9B438FB9FC27259
+:1090C000251B38950A24B4CCA567F6103DB9624D2E
+:1090D0003CB387E8C9164F8AA6BE7217ECCE0C289F
+:1090E000376668FA31E5FEEA3236F483E7989A94F7
+:1090F0007D5C66DB19C0B8EE3297C13B1032DEC230
+:10910000BECD6232C2ED111C748DD2CBCF3FADE02B
+:109110002B84521C7A1FCFF7F40AC4EF1D6D7ABA64
+:10912000C7D3DCCBEDAEE63582CF2E201EF8BD0DC9
+:1091300077AF40EDEEDEA7EB9311EF1B000F00477A
+:10914000DAF8847D2C114793E9DCD54A055677DFA0
+:1091500039038EB3E23B02DD6755BF9BA0C2BFB2AD
+:10916000A991CE91017C5EA44F759D4DF647E95CB7
+:10917000D5CA89970DA887617D970634F8D4D65B48
+:109180003CDAFACA8DDAFAD132E59EF234360DF9BC
+:10919000E9789920E23924B5FE51D6F9B7F15EE7B6
+:1091A0006ED1790AE9B3CDE89F81FA7EB7E8A2BA19
+:1091B000DA0ECF3B18F19DF8E100F1B140FCB9C5E2
+:1091C000204B35F83D977681E87605B6ABF3670F0F
+:1091D000BD4F75FDF0FA4D55EE5A9C1BE8BB30476C
+:1091E0000509ED907A511693F3882F229E77F9BDE9
+:1091F000C2076FA3F603B8EE4222857DBAEBFE44A8
+:109200009F17E6BDEBCD563AE7765721D0811DF981
+:109210005E47E7D6E6E3792F28EF03796881F22EDF
+:10922000FDA12692EF338D12C977E59C972A2FE492
+:1092300017B5E7B6E6679E213BEBBEE776D279B578
+:10924000C93972C1D3A80F2D7CFE1D4704DF6618F3
+:10925000A723EF34C9CF71323F2FD76153E4682F72
+:10926000C85175FDB0BFE350AE612269411ECD9B70
+:109270006E56A95D263928F86B75E8FF8E53E6DD3A
+:109280005F6DA775A73D7A48C0756731EF6601E647
+:10929000BB823A7CEC50F955EDD7B5F80BE85D563A
+:1092A000AFB5635B45D7E365305FBB6DC0C8CF2DFD
+:1092B000068DA81FEEE0F8DE48E3C3F27574EE50A9
+:1092C000E2FB30473F988076CEFAA339E3D808F620
+:1092D0008DDEACD3C8118314A79137F373B5F26751
+:1092E000A1432B77BE5196A3695F244FD3B4DFDF30
+:1092F00058A8A93FE0ACD4BCFF60539DA66EB2CD88
+:10930000D3BC6FB12FD6D4E373976BDE1FE358A5A0
+:109310006937BDF5A32601ED71B377C00578E8067E
+:10932000DE284B1ED223D312E06528E30A2D562CEB
+:10933000BBF34D744EB67B3CE89744ECFF1D3A7787
+:10934000694E7CC95C03E5DF0BBE5AFC7E0EA0C9EA
+:1093500085F6DB3D4F68E3F0C7AB385FA96543B9DD
+:10936000EBC10A28F35EB067F07BE9817B707FCCAC
+:10937000718CDB45AF99C92E9A89765388BF71B03D
+:10938000BA667E39F67B42BE17F982F532690ABCAD
+:10939000B7CF083B8B7AEE3523F5CBEB1DD085E6B6
+:1093A000F77F59CEE5C1B3CEDA7B71FC8E3ED0B2E9
+:1093B000C84FCF7D6844BFAEA3AF3F01F5D90CE7DE
+:1093C0008746B4CF879E2B7A4E0CC6619CE31F0E56
+:1093D000E923DE63DD5E6EA4F14F2B72BDE53B7ABF
+:1093E0003A4F8BF7376B4A86E473CBE1A01FEF63EC
+:1093F000B7B4F37B9B788E36929C06F9FC61A8BCCF
+:109400007D361DF4C14C1A4FA30F9697F9E9DE3E45
+:10941000C86FCDFB2B97345CC57C25C871EDF34C30
+:109420007E1E96B10103FA7320D735ED1BCB95FB59
+:109430009CD358DE1720072E3823DFDB7DBB8A9FA5
+:1094400033B8E0AAA37D7816F089E7479F1D863FD1
+:109450008ED7DBE1ED65A48190FD1B66FF5771FFA0
+:10946000EAE52872FBA2B2BFFB8440010A55B7337C
+:109470008EE87785B975EDA542DC97CFB7A2BFDE40
+:10948000F22381EEC1FFB2FFAD343BACDF78F8547C
+:109490001ADE97761F3A9586F789DB0CF6CD68CFF2
+:1094A000037DD03DE48E5E3FC1DF7EA8B01F9FB735
+:1094B000F70A0E14C9EE9EEB0DB44E36B015FDA39F
+:1094C0007D51E03A58CEEDABC3E5762ADD2E9813F8
+:1094D000F57E8FC9E713901E403E215C47C00F8286
+:1094E000FABE6DE6A648F6D46505DF27B71919DE82
+:1094F000FB6D83FEB88ED359A78DF8BD8596C3B09A
+:109500002E01D771EE81781C7F8381A19DA1C2F7C6
+:109510007156E0035CFFFBAB0D0CCF2D6F59AD27EF
+:109520007CBFBF81DB27FA877FBD3503EACB802E66
+:10953000F13B0F2756DF389D01E3BEBF86DB69751F
+:109540000F1B882F97AD136EDD4B0EA56B956EFF2D
+:1095500046A1D370FA0DA7DB61F4BAE6EBD1EBDBE1
+:10956000E5B7EC9019A8F761FFE78C433AFA1E7350
+:109570001C407E1A3C611807704FDA2A39C0C36359
+:10958000D3F5BEA7D2506E9CE0EDF96D7B052E7F22
+:10959000ECCB717D19DD4686F7082E2AFB7651D972
+:1095A000373B0B0AF1C8CF626012CAA96C25CEF90D
+:1095B0008A81351D46FF52E4F267FA8F6D7BB787CB
+:1095C000D0EF7F2BE774ABCAC56946E63A6CC5F7A6
+:1095D0000F8D5F04E3BC6CE0E7352728E34DC90934
+:1095E000362C825257C1E5E46F1538D4FA9F143EE9
+:1095F00060277F43F85C68E6F89FB7D1DF8CEBF813
+:1096000099C975BD1CDE5F30E17C1BEABDEE493FA8
+:10961000C9E3DFB973901DEE56F07FA2FC37CF632C
+:10962000EECF32358EF6D772F46909E9D932A568E2
+:10963000DC48F130F7CD6CE64A01BABA9943A55A35
+:109640005F74FCAA7180FC82EB0DC42F37D3E9B99B
+:10965000DAEF5305EEE9468E07D6974A7A1BE4B651
+:109660005816926750F1A0FAE39629FB69BF1E5B7A
+:10967000C728EECFD8D3848F156DE7845618E741FD
+:10968000836CB002BECF2736ADBD3485B19F6C620E
+:10969000CC050B3ABBC9CC5C77037D6C92A81ED875
+:1096A00064A3FABB9BEC545EB638C7A2FE79E0A473
+:1096B000670AE2ED44D61E672DCC73EDAC81F04114
+:1096C0003B06F4FD98426B37FAF4CC0CED377A94F4
+:1096D000EFAD28F03F743383B940BEFC02E7838EC0
+:1096E000ED1B7F4672CFB1E67A03FA49F96D17B7E1
+:1096F00062DDBDF1770D685F7C00FA04E90CEC7E59
+:109700006613509E9C33DA810E9A6FA6D0382FEBE9
+:10971000820DC877DE630243FAFCA0F7BA711CD74A
+:1097200057742DE1F94D74E69F2DAD4822FCB8FB2E
+:10973000F2757C7F8B74A1F729FAEFF94302EE876B
+:1097400079A3FD9D4AEC7F46CF90AFB7D70613A40F
+:109750000872F8028C8B97A3701D5886B73719BD15
+:1097600053F03C419342C7E1ED8B15FA044C1B9436
+:10977000EF2932218D9F23C19F1658526232F94141
+:10978000FE38E0E796BEBAAB22961E817DA8F5CFE3
+:10979000D88721767C343AFCB2257E43E6C3294340
+:1097A00075F42343EF7FA01F19E9FB82A6ACC9E340
+:1097B000468A77B907C0BE83FDEA00C3C99E82F41A
+:1097C0003E8DCA4F8E74D9917FCC71C13DA82FD8E0
+:1097D0005D3AF23BDABD5A7BA841E18706C51E7AA5
+:1097E000B442EB3F819FD45EC1FDA484E34CE33FD0
+:1097F000853F27FFC98C7C05F34E83FD7925D2FE7A
+:1098000054D5AEC77E13D82EA27306748EF415BE3F
+:10981000CEBFA8E07A54E5EB65C8D748BFBD9CAF82
+:10982000C3C76DA9AAF90B1C775B947B10F757F19E
+:10983000F1DA9F13085FEEE752084F1FB3E79CB5BC
+:1098400040971F031CFB802EAF399DF149D0FF9A32
+:10985000CB199F6C1D92031DCFC553BF6D9317A7E6
+:10986000B442FD19A47B18EF93DE3A8A6F3EF41CD4
+:10987000E73F75BE0FFCCB52909F8A0D41A303DAE0
+:1098800033FB2E26A01D587CE4FE14E4C368706EE2
+:10989000AD54E0DCF8D8DA4B299C1EF01CEE5A459A
+:1098A000BFB99FF41B11FF6B3732A2DFFED77ED901
+:1098B000817CFC495FBC84FAF0E3A3F15E94FFD79E
+:1098C0008E997C3A81FC106F22C8B58F0D03F791F9
+:1098D000BD79442FA1FFE83EF6DB3DC88FEED74CA3
+:1098E00068F9B1B57D5DD751EFB5F5DD7B55C4F2B3
+:1098F000A5D1E587F68D8FD37AD5FA6F3799ED2804
+:10990000473F11B99C58DBFB2AD9BF6B076FCCC00E
+:1099100038EAC747FF4F09CA35F79B374A509EB907
+:10992000DFB85182EDEE1FC77B22D92D71B3F484CD
+:1099300057555F66BF276AE2451B14FAC8EEDCD5AF
+:109940003809F0577C6E8903F3B66A7BF1149D13D6
+:10995000DF2FFE797DCAC321FD3A0322E58D8ACE31
+:10996000D5C7AF0EA1CB47AA0C9AEF947DD5380F7F
+:10997000B6E2F72D6FC575023AFA0EECB680C8BF95
+:109980002FBB46F0A1BF01F64B783FB2A7AE3D9288
+:1099900042F71099E89C3FBD08EB531CDBED2856BD
+:1099A000CCA72687D84BCB023ABF09E8A8A9CFE4B9
+:1099B000277B3F205EA4BA62473D74FD3763B285C2
+:1099C00008719ADC77E7A01C0F8FD7C0CF18845B93
+:1099D000B5AFCEA7F3F851A647D22D04B89A3B995C
+:1099E00084781D16D7699A4BF1A2F0F88E3DB0DB52
+:1099F0008CFDEC937512C2ABDAA5B88F3D11E4C0B3
+:109A00005F567279A6F2576780E7F53A03B5E6C963
+:109A1000507E5769EF9174CC0B78E9ECBBFF00C620
+:109A2000173A071F8C9F0EF374BEB798619EE79A92
+:109A3000546B9E82FD06E79A1FC81BA29BF0F91A81
+:109A40002AB95D34642F44D67FA50A5F8F961E2CF9
+:109A5000ACFCF3D083E09F575472FF7C058F9F705E
+:109A6000FF3C5C7FA872591D77AD82EFE172F92A45
+:109A7000D939E047935C5E5B69A7F732FB16A59086
+:109A80007FFDDE9214BB75F8F839A243979C377CB2
+:109A90007CD59E737BE55366F47B643DF1A77B899F
+:109AA000E0C3FC976AFFB99D02D9E5EE66830FDF3C
+:109AB00053E10A2CE1F1D8076483CF220CD989AA9B
+:109AC0001D79ABDD2150BB6A57AAF663C0C9E3BB61
+:109AD0004B8A78FB658B6B55E5585CA7859E17977D
+:109AE000F3E78C394FA15FF5E05281911C50EC4AAD
+:109AF000954EC3EDCE4FFB7212478A433DAFD0A7C0
+:109B0000CA6713C2F843D563CF54707EEB403D5E05
+:109B1000887AFCF71AFB3C7C5CD0E38F57523F46B7
+:109B2000FD8B7E2E3A23F9EB6665FCADEAFE054E11
+:109B3000D620BC592CB019FDCC68FAF57B8A9D1350
+:109B4000ADFD19C57EBC1D3F1F56E4C868F1F3CBBF
+:109B500095B7F270FFA9F9F9967D688C62BF57D569
+:109B6000BC86FB1FA7F7046A90FFFE9781E2EEE137
+:109B7000EF3DA5FA9F22D3ECCFA92CA30EFD23F72E
+:109B80001A1E3FE84EB2BF437ECC5B7A86E3AC053B
+:109B90007F10EDB8476F2651D986F632942B5E3888
+:109BA00047F988156BB4F077634C17FBAFCBA6F37E
+:109BB000032DAC9EE24C2D7D49D216500ADD630F79
+:109BC0009D46BEF21ED0DB0F84BEFF88FABE99C749
+:109BD000E136A6FB28F71A660FB478C2ED7EAD7D9C
+:109BE00050A9C48DA2D9096FF45BB85C39A3273E94
+:109BF000EFC078D34CC68C7D5C2EB837F23849471D
+:109C0000DFE604FC086ABBD27E450C501C8AF26B6E
+:109C1000F0EAD5BEA7D3E83E97ACCD27B5EFFF3924
+:109C2000C9CBF0BC52720F974BEE36BD92472AA1BA
+:109C3000EF97B7833F390EED4BBBFD1B8877808BC9
+:109C4000F948DEC89AB8CB3E25AFF4E9997F253FA5
+:109C500074C5912879A4EE793C8FA47C2777781E6F
+:109C6000E9F4A90CFBEDF3481DBDE7E81ECBEDF2CE
+:109C700049A6AA5B711C8A3B4E14797C77629F20AF
+:109C800061BC6A621F5F77E9B638B2AF1B7EB53A36
+:109C900005E581BA4F9F2CE2F8FDE4FDCF6AB05F85
+:109CA000C9AF44C902EB7AE3FD0D3FCBE075BBD9E8
+:109CB0008EFD36C4A33FF3C9AFD6C7237EDF801223
+:109CC000F7E7C717C4C8F1C9A178756615C59D9592
+:109CD00078B508FA70CC505C27BCDF8B555C6E748D
+:109CE00083BB4271CD233CEFDF9DEE9A47F5BF9ECB
+:109CF000C4F8DF2990291EFD2AD035C68DA6C16281
+:109D0000312FFD3FE35827E691BAC7BA7E427CF473
+:109D1000D73A3BF211F4A7FC93F7B09DF423866A7F
+:109D200031CF33033F5B40F7315229DF738FB28F5E
+:109D3000E9E0CFA25F09D02CC13CF43425DF332306
+:109D40008E8938FE0E836BFB54CC2FF58B8ECDC4E1
+:109D5000048E143C6F199E7712649E2F57F34F6A3E
+:109D6000DE3C5AFE49C07994EF56F0F396B280F982
+:109D70007435CFC4963A29F9B5A5CC43F7427C8017
+:109D8000B3AF73DE6B84FCCFC31511F23FEB2B989E
+:109D9000629F69F38DDB735F213AFDAA79C6C378B0
+:109DA000AEE28EE6C5ECDC0F0D83BB28E9D334F2BE
+:109DB000BBFEF86F09A467FB6E903EBC1634B10081
+:109DC000C51F0778DCBDCF4071866BE0BF8D0DD11C
+:109DD000B3EF54F0718FF7D511FDF704EAE3F1FD0D
+:109DE000DF2BCFB7BDB7E47EB4F7BD01FE1D0BC6B8
+:109DF000B83FD613108BD16EB983FBF2646584F53E
+:109E000099E3B87E0AE7A35285FF4AAB389EEBDEA2
+:109E1000E77E987B03CFAF488A5C707B785EFD74E9
+:109E2000569AA0C6D3C745CABF1C0992DE687944BA
+:109E3000A0EFC97CD9FCCB33E991F3F12B7A2F4603
+:109E4000CEBF343690FC8C16CF0E8F63FF9D2AFF59
+:109E5000A6F338767A9544EB4EF6E4D78C6343EB61
+:109E6000BF83FBB07456847DB883E36F9C1DDBF128
+:109E7000EBCA633BFE13311E7F7B8CC7FF61796C9D
+:109E8000F3EBBA8AD8C2FFDB18C3DF1F09FEFF5706
+:109E9000CF0784E7FFC3CF0B849F0330BDF5B01716
+:109EA000DBBA849D413FC3EF8DBFD624801C149341
+:109EB000F6D37DCE05E53C1FB6ADDEECDB2B0C9D6D
+:109EC0001B50F1F56835F723A5BCEB5EFC5ED404AE
+:109ED00039509F82F1B272FE7743AE59785E8C8919
+:109EE000523AE6C9E0CDF4C56097745B22E7595356
+:109EF00095F1A2E99183D5358B6715E31F3D8A7CE7
+:109F00000EFF874A1C52EAE5F7E999684F5F4CF368
+:109F1000DAD3D11E4A3CC99F27F899BC97E0B267B3
+:109F20002FE67FDC201BE17B46C9FF26CFBB2B1B26
+:109F3000E3D2C96017625EF069CC0F923F2BD17BF0
+:109F4000EA7C9766713FEA190313309FEB9DCACFF5
+:109F500039B19EDF91FDA6E6F5CE1AFC975A05CAE7
+:109F6000EBB523FC3FD5F9F3F6652B440CF8CDEBAC
+:109F70009128DFF876F9DFE5BA681E9EE77B4CE2B0
+:109F8000AF9C40BF19E078EC6821D1EF8AE3E5FF90
+:109F9000D48CFEC76491F03CCCAF54E205179478A2
+:109FA000871A2F50F35BFFACC4493EC0F80B9403F3
+:109FB000180F8172FB2CDD9DD64FDB6745E0FF67F4
+:109FC000041E1FF2FE94C7870A8D8E9CD0F3947FE7
+:109FD000358BEF63AB9FE72FD478CF0F95F5147EC9
+:109FE0004FEFC7EFA1156E9D6E443D5FB8352B0E48
+:109FF000CB19B24F9706F85EB6FAB04EDDBF487483
+:10A00000B45759E7B63341CAEFBD1A96F7BF348B40
+:10A010009F6768A9E6FB7B09FFA018D41F9B226EEF
+:10A0200041F331B14AD247CA2BB5805F8C70B67606
+:10A0300073B8557CB7F8ED7538CFC553C1AD581618
+:10A04000ACC9AEA3B87BDBF5AD68BFB9076F9CAEFA
+:10A05000A67899D18EFEC44303DAB8DB13D53CFE53
+:10A06000FE2A1AE088B77B45F28F0BEF15897E92A6
+:10A070005B2CE4BF261B98DE8AF545DC2E2A684C53
+:10A08000ADC33A5B9244F660C1197BD2C379437188
+:10A09000B0E47B378C453CDD2ECFAAC6D32E5BE4E3
+:10A0A000E3B89F5F35CFDA7EF63D3A6FAAAE4BC577
+:10A0B0008B9A2F8D966755CF3DB81B3FD39CD3709D
+:10A0C0008BC1068C3F161EBD6854CE5F4AB6ECA10C
+:10A0D0003C6CE191EB947F55F3AD6ECF75B2ABA1C3
+:10A0E0009F11FBF76CE2F9D7D7000E2C7B61DDB234
+:10A0F00009EFA1DBA8EC8375E3F3639B72A9F46F0E
+:10A100007250797C531995F899C9F464CCDB5EA739
+:10A11000BCEDD559C3CE4D525E6FB7E8FC08F115C2
+:10A1200092F7A37A78DE4F1FC7E335EE3306FABE07
+:10A13000A1FBAC99E4774D5FEB44F40F3E3FE79A07
+:10A1400088707760DE2D842E3E911D9624F4839DC9
+:10A150000E0BE6DB0AFBAF1AF13C4C871830623C71
+:10A160000C20CFC0238BEE9EEBFCDC6F5F8D05F1E6
+:10A170007BDBFC58EFFFCF8F7D95FC5877353F2771
+:10A18000ADCA9102A74EDE8BE519D9F270889CD832
+:10A19000E6E4F9946D9327111FEE764E4A5A1D326C
+:10A1A0005E67238F5F24DF3BD912FAFC97D53C1FF3
+:10A1B000962C306724795633FBEBDDC71B416ED7F5
+:10A1C00044B2FB3FF929D0E54CA08B23DF9E3890A9
+:10A1D000C7193F341EB7AD71F5C431289F2E98D8EA
+:10A1E000141EAFD3C4E358585E2E5A5C6E45A34E7E
+:10A1F000B6D079A1E004D4DBE1F13326062770BDA7
+:10A200002E67E0BD1498318395B161F9B95F30DFF5
+:10A21000CF27C3FBCB1A75A42FD43C5D41A3C8360E
+:10A22000017D166C34F8283FD7285EA476C56FEC04
+:10A23000940A3290CE3F386B9430AE161E1F7334A2
+:10A24000EEEF9E04FD1D6D02DD0BBA5D1E4F3D0756
+:10A25000DED2DB3F07E36DF96C57773DF4CF9FAC5F
+:10A2600093F0FCF4F07C1E3FFF5DA0D839E171361D
+:10A27000A433B44BC2E3F01B153AD8389BEBADD7EF
+:10A28000147F531D47ED174E3F3F9DCDF56DB4B87C
+:10A29000FE5165BCCEC6826D93717F17E818EA93B4
+:10A2A000CEC65AF3E490F176CCE6E7DB9EC1FC60C3
+:10A2B0006A687E90E701C3F382AA9C2BECFF7D03C2
+:10A2C000E27B37C86BD4636E1BCF1F141EAB398380
+:10A2D0007263084EAEB777C39E07C8BE732431BE03
+:10A2E0002EFA7B45DEA302C5E70A167C763C1EEA01
+:10A2F000CC9944F7B0DC67276FB1A23C5A2016E333
+:10A30000BD1EB753B89567C27CD2FDEFACA1EFBCC0
+:10A31000163E907F0EF7E58166039D0F54F5DEFD36
+:10A32000EF3435F0F6BD4FC6617BAEE0B0D8F179C1
+:10A33000237D3F76FE4B7EFABB580B113A90E781A6
+:10A34000B39744E49BCB16D7DF231F152E52F24C54
+:10A35000CD5C4F3FD0B7C8C0C8CED3EACD13599F0C
+:10A36000533CE8465F21E58F52F0FC43DE90BE2966
+:10A370003C0A7A6CCC9DD3633F9D2D113E67821EB3
+:10A3800043789217F13C7DF8FEEF50F63F9A5E8AD3
+:10A39000268751FFF0FB63DE0CC1365C8FDB31EEAC
+:10A3A000538AF63A94E3A2D3DF1F6671BA4E8A62EB
+:10A3B000CFFD49A1DFA8E7A77A4727CFF487D97F48
+:10A3C0001E7963D5FF52F34DAABFF6A0620FAB65AD
+:10A3D0009352FEBBEF37A0728D78BF2139F2FD8614
+:10A3E000870E0968A7A8F71B4E1959CDE1543C4FB9
+:10A3F000ABDC77F22D223BE9D4DFFC62EB8BA97852
+:10A40000DF4990501DB51F3A477ABE1DEC23B2A715
+:10A41000FA7ECBE3AD87F8F9F0F6DEC8DFDDDBAD21
+:10A42000D8DFF53223B9D1AE9CB76DE851F244B70D
+:10A43000E2968F8BA1714BB73D30563DC7EB237F22
+:10A440004F1BC78C16B7EC60413AB7DBB14670A022
+:10A450007EB8DD39DC5DCA79DDA8714C79E473B969
+:10A46000E1714CB95A9BC7B96F96C4F7DB250868F0
+:10A47000EF9A75CE363AB77F4C90229DF35E5ACD57
+:10A48000E5F47C250F72D0C8E9E3608540F76FF0F2
+:10A490001E1EEEFBC163FC1ECEC1027E0F47CD7BAC
+:10A4A000A8F76BA60EE53DE8FE9D7A2F47BD67C372
+:10A4B000988FE05AF45C1C7DC76B87E1908DDBBD03
+:10A4C0005E7E3F1A6510E6434DCC13895F6BAB6B24
+:10A4D000C46A7AEF8EDB4F8F5447F07B7D8A1FE989
+:10A4E000AE8EEA2FACAFD6FA0B540FF717EE54DE50
+:10A4F000E38BD9EC4EFBFB87631C8F9E323BB6F19E
+:10A50000C4EC48FBB6C5A2FD1EAF5A5E56E4DFB0F0
+:10A51000EFC50DBB2FC9F57AB760FFA74ACAA71BC5
+:10A52000289FAECAD5EE317CFC1F29E3A9654029DE
+:10A53000BBA37CD7F9974ABCAC4B947B10EE692F38
+:10A5400068E397D30F69E397337B9335F57CFF7806
+:10A55000CDFB85672669DA8B03F768DA4B2F146821
+:10A56000EAE503159AF72BAFD46AEAB382DAF86505
+:10A57000F5CDC561F7387DB4BE1AA0DCD07E75E696
+:10A580006F6ADECB58A35D579647BBAE891BB5EB10
+:10A5900052C7CDF66AD797D3AD5D5F32E6E3F2BE20
+:10A5A0007E3E2E7FB65DC9C7E558B0DF338D932D53
+:10A5B00068B7A9F7A9D5F7FE2F376658DF407F00A7
+:10A5C00000000000000000001F8B080000000000D9
+:10A5D00000FFB3E46660F8510FC17BB918186E72C2
+:10A5E00021F84301CF6786D06A2C0C0C1A40CCC6E8
+:10A5F000C4C0C0CE44BC7E714E047B1D0703C34C57
+:10A6000020DEC831F0FE1A487C9D877E76A9F34291
+:10A610006859C181F73708570A3130B40A3330C45A
+:10A620008840F80CA2A8F2554208B6A924657639EC
+:10A6300002F5030024CC7134800300000000000008
+:10A6400000000000000000001F8B08000000000058
+:10A6500000FFE57D0B7854D5B5F03E731E3393793A
+:10A6600064F2200F02F18400A242180284870827B6
+:10A6700021C4A8018380BC54263C43483211A8BFA2
+:10A680006DBD77260411ADB551691BBCE81D1014D2
+:10A690001575A0D1061CE84014B1DADBA8F8A8D5DE
+:10A6A0007650444048C2CB8B2DD57FAFB5CF49E61D
+:10A6B0009C4C48D4F6BFFFFFFDF1F3DBECB3CFD9E0
+:10A6C0007BEDF5DA6BADBDF61EC1329A244E22E465
+:10A6D0005BF8A365842784F4E92CDB0ADA8F9164A4
+:10A6E00042FC2F8BF2368E10EE778EF0A45184BC94
+:10A6F000B5990B98693DBCCF4608AD9FDE343D60EF
+:10A70000CE2264FF08B302EF9FDE9A8FF5C92FBDFA
+:10A71000E714687BD54BBC0075D3BE13CE889D1063
+:10A72000AFB9E5A16BE9F3F69778B2850E45FC93D6
+:10A730004D2485906316C2FE2EB2FA522BAB566D95
+:10A74000DE7F07F45BDE642656DA4FD5EE65D3AEC6
+:10A75000A5F565874402AF546DAB95FAD2FAF200C5
+:10A760001784FA9A7D7FC671DA0A48797028212702
+:10A770007D16225F49EBCE969459F47945606711B6
+:10A78000BC5FB183739BE8FB159BF67F0CFD5734D0
+:10A790008A0379DAFF8AED36220F61637F4B601EF0
+:10A7A0004BA601BC556F88C44CEBE5975649047025
+:10A7B00024D44BA50E18FF614976C03887701C0D54
+:10A7C0009F55CFD071E877D52F706E985AB589789C
+:10A7D000009ED6DDD6394FDA615EB5D260F87EF7DD
+:10A7E0007D12BCB72C50F6B25506F8364B4500E743
+:10A7F000A6CDD2D2A19DFDADD8FEA60EAE630DD9D9
+:10A80000A99EA8766379D247886CEEAC5710A20453
+:10A81000ED0077409A3EACF3F9792E8190D1D03F8C
+:10A820004F644B67FF9430C807FEF7E83F810FF68F
+:10A830003A02DBB23AE9B5D245FF2D77D2EBAC4B09
+:10A84000A59FD09E17DDBF563E0474A0F0D4FB5CDC
+:10A85000583EE24BC372834F46BCFDCA3704CB0659
+:10A860009F1B9F3FE61B8BE5269F82E513BE622C54
+:10A8700003BE527C6F8B6F0E965B7D1E7CFE94AF89
+:10A880001CCBEDBE1A7CFEACEF6E2C77F8FCF8FC0E
+:10A8900005DF7A2C83BE7A2C77F91AB06CF405F0B8
+:10A8A000BD977DDBB16CF205F1F91E5F1396215F58
+:10A8B00018CB7D405F5A867D2D581EF07D88E5AB14
+:10A8C000BE087E77D0771CCB0755BC3B27907C8198
+:10A8D000E2CDA9101715179258A2E48BB49E58CA5E
+:10A8E000EA29B7F9F3255A4FF1D03AC563DFCA70A8
+:10A8F000BE99D6FBD6B0F6CC7B488185D633FDAC6D
+:10A900007DC0834A8195D607D4B3F6C19BFC0571FF
+:10A91000B43E38C0DAAFDE112EB0D1FAD541D69EA2
+:10A92000132293EDB49E1366F5DCB794C90E5ACF8B
+:10A930006D61F5BC8FFD939DB49E1761DF8F3F1550
+:10A940009E1C4FEBE3DB59FBC44BA4D045EB130932
+:10A9500087F5027B7E6102AD17B858BDA85F9920CC
+:10A96000C7E0BF7D626411A1BCB0DD7FB322A4D378
+:10A97000BA145945DC149FFE39580F8B6431B4BFAB
+:10A98000E52F538471B42E91D5D0FE177F05B61FE5
+:10A9900010656C6FF7AFC2F603928CEDA6DA7BB050
+:10A9A000FEAAA8607B72EDBDF8FEAB9282ED836BD0
+:10A9B0001FC2FA41D183ED636B7F8DEF1F943CD8AA
+:10A9C000FEC8DA805248EBFFC179B6005FD7719EAE
+:10A9D00072920DFC1A4C2BA5FCBA8E2373403E1EBE
+:10A9E00000A6A6F2B02E5D5240BFEDFB47DE933CC1
+:10A9F000A7F27632D4973EF54016F6F31CF623D232
+:10AA00007EF89EFB99F8CD585D3F13BF29D7FA69B0
+:10AA100084F7EAACBDEB67DF37E3F5F07C53A1F5D3
+:10AA2000B317FB71F46E5E13BF9DA087E7DB4AADE1
+:10AA30009F83D84F42EFE0098B6374FD84C5655A4C
+:10AA40003F7FC47EFAF40E1E451AA7EB4791966B22
+:10AA5000FD7C88FDA4F7AE9FB074AD1E1E6985D63F
+:10AA6000CF11ECA77FEFE6A598AFD3C363AED2FAC0
+:10AA7000398974CFEA5D3F071C7AFC1C7074E0E7EB
+:10AA80001CC233A877F32A70EAF153E0ECC0CF255B
+:10AA9000ECE7AADEF573C0A9C7CF0167077E440EB5
+:10AAA000E635AC77F32A88D7E3A720BE033F4E0EE6
+:10AAB000E019D13B785EEDA3C7CFAB7D3AF0938A26
+:10AAC000F08CEE1D3C85297AFC14A674E04746788C
+:10AAD000C6F5AE9F5753F4F87935A5033F57613F4C
+:10AAE000D7F56E5E85A97AFC14A676E02717FBC918
+:10AAF000F76C477808EDC7D17D3F07FBEBF173B0EA
+:10AB00007F077EAEC57EA6D07EB27BEEA728538F90
+:10AB10009FA2CC0EFC14229E6FE85D3F0733F5F830
+:10AB20003998D9819FA9D8CFD4DECDABE80A3D7E34
+:10AB30008AAE60F899248CC07586AE9D6E9E7E723A
+:10AB40007DBF7C85A3EFF32E56E75D6E02760FAFD7
+:10AB5000D933A445E1E9FBF61D09B90F9068BBA6FE
+:10AB6000E076C08F835A79D1764DFCD8389D1D95FB
+:10AB7000A024EAEA49C57D75EFF7291DA06B4F9D1A
+:10AB800073B5AE3DDD93ABAB67948FD7BDDFBFA68A
+:10AB90004057BFE2EE1B75EF67F96FD1D5B3D7CF42
+:10ABA000D3BD3FA87EA1AEFDCA860A5DFB55819547
+:10ABB000BAFA35DB7FA27B7F58708DAE7D78D303E8
+:10ABC000BAF611E14774F591871ED3BD3FBA658B84
+:10ABD000AE7DCC87CFEADAC74576E9EAD71EDFA398
+:10ABE0007BFFBAF603BAFAA48BBFD7BD9F4FDED561
+:10ABF000DBDB963FEBDE9FE2FA4CD77E7DDA9706F1
+:10AC00003BD5EE3A768D5AE741AE08FA25FE740937
+:10AC1000EDD5B043C2BAD4D7CEFC14C752F928E55B
+:10AC20001FE9C0223919F992FE51BB21BF6FF99576
+:10AC300011FAFCAEF19E2B5DF4F95D9267B82B869C
+:10AC40007D43F98D236950CA26288DEDF7898CDF65
+:10AC50000B322E0D3E42BFF79ADA0727D0FA703E2C
+:10AC60003F08F2F1326742BB3A8E2735F05E9C997D
+:10AC7000A0DF745F56DE93FE287958DF9FDA195CF7
+:10AC800067BFEB454F1ADA51B59FF8C1CE59D79F30
+:10AC9000CEAB2F21AF709F84FD03E9F7FD97A67916
+:10ACA000687F6689FA19D1E34B74FCA1387E18E4F9
+:10ACB000E1208C3FBAEBF8E6016375E35B32CB75BC
+:10ACC000E35B243ABE8B90DFD77EAE8E4F89309EF9
+:10ACD0009037B9CF717C7366398E7F9F44FDAEE8A3
+:10ACE000F1E33AC66F81F9BFDFDDFC078CD7CF3FB8
+:10ACF000B3423F7F89CDFFA3DAD3EAF87138FF3F33
+:10AD000073A7D9FC332BD8FCCDACDF8EF19D1DF899
+:10AD10008FC0F8C7BA19DF9C3D413FFF2B2AF5F3DE
+:10AD200037B3F14FD65E50C7B7E3F85F7217D8FC60
+:10AD3000AFA8C4F125B3C70DFC2365C4D504E8F85A
+:10AD4000A41F557CA9C02E741C28872452A12164FD
+:10AD50001B3700E1B82B8EF1DB577194DF509FF960
+:10AD6000F1390950CD9947FD4695D757ECC8974022
+:10AD7000EF613BF5B796A8A02E6EE291BFC90673AE
+:10AD8000601085B7B589F7437DF186EB02A05FBD02
+:10AD900066B2A014BE1348189E7FFECB615BA2E78B
+:10ADA000652C97D48BC72251F2D6E1071690213536
+:10ADB00014BE29C004A33BEB9F523F0E1CE38FA996
+:10ADC000DF43A8FFF399C8C6FB0BF5F7A01EA1FE51
+:10ADD0001E3ACEA416BFA3DD1D4EA3F097AAF07FA6
+:10ADE0002A3079FDF4362EE0A7F2F9D58F47A07FFF
+:10ADF000BDE06E1B457A271C65FE245D9DCECB0F02
+:10AE0000746ADF6D0E6CE110BF32E06B3A8A262166
+:10AE10008BD667505C77BEFFC1BEA907392721B723
+:10AE200012454CA5EFDFBE9AEBEFA2E3CE52CCB9B0
+:10AE30006C1D52324C28D724C33496905B1A478835
+:10AE4000B407325D113F8D448D3BA3585F9F55AAD7
+:10AE5000AFB78A8A68A270B54EE7C866DAEFEC39F8
+:10AE6000FA766D9C81A644466775BC528A9374FA43
+:10AE7000683694B9F0D885749EE362DF6AF078177B
+:10AE800089248C7EBCBF0F01BAFA93F1BD792E36AE
+:10AE90006F23BC73448B524AE739A78C0F007F1B8A
+:10AEA000E1FF689F4D31E5D072FDA32231759D8F82
+:10AEB00011FEB91EE37C8222ACF3F3CB8DCF19DFF8
+:10AEC0001C53E9FF29F0072DBF00FEA0F01F55F924
+:10AED000A353AF32FEF09A3DD3801FDA37F204E974
+:10AEE000AAF2CBAD2ABF2CA9D7F305211E11E8B8D1
+:10AEF0006C0E97FB40141FCC56F96059839E6F6E01
+:10AF0000277E313D065DE66ED87C6F9ADC757E9FAC
+:10AF1000A87C33FFC1FD889FAEF36474BA43A5D308
+:10AF2000ED35FAF65B55BADEAED2754EC3C3AF51FE
+:10AF3000F541E6C90111E4DDFB538D9E111D3D3D38
+:10AF40002A3D8D70DEA1D2F38E1F337A1AE18DA8CF
+:10AF5000F48C349C13C980AEF01AE15B707797F9DA
+:10AF6000605CABCC1F9B9EDEA6FC5547A39E57059D
+:10AF70006F5875344ACE566C9FAEAB2F0FCCD5BDF3
+:10AF8000BFACA14CD7BEA47EB9AE7DD1FA3B75F55E
+:10AF900032FF8F75EF2FB8BB56D77E7BCDFDBAF64B
+:10AFA000F9E50FEBEA733D1B75EFCF9EB359D73E22
+:10AFB000ABF4195DFB8CE29DBAFA7465B7EE7DD3F4
+:10AFC000BEAB6E06FE7CEB3D9E803D71C1FD05C6AD
+:10AFD000332FB84537BC73D427235F1FF30DC1F25D
+:10AFE000B8CF8D7C7FD23716CBD6A6663BAC137418
+:10AFF0005D5C4A12086932CDAB5DDF0FD66982EB2A
+:10B0000069C8E4A9F5D37AB34946792869904878A4
+:10B0100024211C2C362A1CED7C547BA487F606AA1E
+:10B02000F893BAB69744623FF73E527605F06577DB
+:10B03000EB03FDCB00BBA74DB5EB8DED951C298D2A
+:10B040007E4EC81A84C36A627647A5C4E4BF7257AD
+:10B050007A0171423D3CB8E672E3052993A7029F4D
+:10B0600064EBE47859C3353AFD4E209ADC07F86D5D
+:10B07000A4EEF98AEDD7EABE3BB59F47B8AB41577E
+:10B080008C8365B1F43313E8E17073E68C6100A73B
+:10B090007214EB4D7DD02E3CE52B5E757410D0AF55
+:10B0A00014CBE3BE39581EF379B03CEA2BC7F253F8
+:10B0B0005F0D9611DFDD58FEC5E7C7F263DF7A2C1E
+:10B0C0003FF2D563F9A1AF01CBF77D012C0FFBB6A1
+:10B0D00063F98E2F88658BAF09CB569F82A52677A3
+:10B0E0003DF1DD71751D3E09FC1783CFA43A7FED5C
+:10B0F000FA099D7C16C7DF877CA6E1B9A4C1ACF232
+:10B10000438A8E1F12C097433EEBA1BD4154F9B054
+:10B11000BBEF63B77BB7FC6BF86DEA0FE4B74E7E0D
+:10B12000CA30F053764FFC348C8FE2A7A92617B3B0
+:10B130007B547EFA19CC23865F310F8C903E51F6FA
+:10B140009A926F82756CA5BA0F421F60FDAC3A7679
+:10B150001D7DB705EDBAC0105837CE0EF9DB60D8AB
+:10B160004738FB21257E56F7F333F249F77857D05D
+:10B17000BF591AA0444FEADA6E8D6378B59A483108
+:10B18000A1EBDAFD839E722F1C8A758124C2F70120
+:10B19000F774478C7EA9AD0CF8ED09AF758EAF72D0
+:10B1A000A0BF638FFD3D0FCAA926662FC735F36880
+:10B1B000B793F0936EC06FC7BA6476A741BCBD7DEC
+:10B1C00090E442BB814CD6E3CF5FA0C3DFFD1447C0
+:10B1D0002DB8EED6A721FE067E3538BD17F8EB490F
+:10B1E000BFF784CF8530EF7F013E7BD28F3DE945AD
+:10B1F000A2C82F34D1F9B7ED1B96FB800CE35E1E7D
+:10B20000DFDAFE9A119E5F7E473E6E4BD1F8B8257D
+:10B2100093801FA4CACBD9C62BE3812E1DFDF44019
+:10B220004FEE779F6482FF7E3A4BDFDF7DC6FEE202
+:10B2300025C20DA7E33A2489C453BF92F76CE3D12A
+:10B240009F7147FC1037D86773D7C9E0379EFCAFB2
+:10B25000B00C3DEBE30B670F3DE9043F6C651A5FF3
+:10B260007334061DB5B22A9855638FF6579AF4F5D4
+:10B27000B3F55C7110E725C7CF1C06EB8CABE6A8D5
+:10B28000087A3F0D4BAD9F9569128E73727B763CA9
+:10B29000F3FF024C9FEC48407D73D267C1F7FFD9A2
+:10B2A000F074D78F060F218DE4330BE873DA96DD47
+:10B2B000FDFBDDCA83705E82F82909895F81BF6961
+:10B2C000A5FF7F3B00FA15B0AEF5EB0DF27EF370F3
+:10B2D00078BE43371EFD4ED6F68CE1BBEEE54E2020
+:10B2E000C734BEA7F4FBABBABFBD62BBB5466FC7E0
+:10B2F00026E8EADEA6F41A9D5D0BFF00C3BD8613A7
+:10B300006009AB54D9B04DB0AF077EDA03C149F044
+:10B310005F38F65E9525227964149716E0D385632D
+:10B3200035FE9767FF99EAA9136F8A04E48C5CA243
+:10B3300050E5A9AE20F29B8998687D91FAF6C2C6C5
+:10B340001525B06E9D78F926F44316935227F8C759
+:10B35000E5A43E0FE2B5A789A918E4F33479C7390B
+:10B36000324A1EAD82849D2E5AAFB7E3A97FAFABA0
+:10B370002F6BD0D797925B5260DF7EE9069104383D
+:10B38000D01BFAF6AF7917F6BB8CD4AC8375FB579C
+:10B390006ABC6BA18B0819546F55FDF6F1BC320ADB
+:10B3A000874B6071166D1F7A7922F37F2A66062417
+:10B3B00085BEFF59E3C85BA906A2DF07D6C17EBCE4
+:10B3C0007F3A716F235DE9F75DE137C2ABD9035D69
+:10B3D000F6C3553892B7734A20861ECB14382667B9
+:10B3E000AABE2B105CBAB8C73443FD7BF35332D1ED
+:10B3F000F1D31EDE93278C66FC03FCC009ED92E7B7
+:10B4000087F49FD6A5FF827F6AFFFD68FF79BAFEA9
+:10B41000A7FD53FB1FD805FE79B1FAAFFAEDF32F64
+:10B42000FBA93EA978F1974E42D7C913427D8A9B6A
+:10B43000D2B572DBBD4E8596C705BF13F8F54480C3
+:10B440002F8E45EF87054E1542C5CE41DC0DFE49D6
+:10B45000FB3FF9ECCF301EF1D536D185F1B4EDE6E6
+:10B46000B099CA6175E3F2129283F523AC7EDF19BD
+:10B470001EEA4D7AFEAB78FA9729901F4239458D26
+:10B480002F85D19EADDEFA7911AC4F5ED28E7264FB
+:10B49000FC0EC6BF9888FAAF4C8AEFDA4EE1C4388A
+:10B4A0008157C58BB7F16767782794377C01FA829B
+:10B4B0007A22E8C71BBF2B57EDD4358223F9988D2C
+:10B4C000FE7B0C19037A51C30B09303BB5EE995F33
+:10B4D000E71CA1709DDAFAA6938BC297264F67836B
+:10B4E0008BFE738FDCBDDE6DA5F2166D0F69EB96DA
+:10B4F000DCA4DAD72156568A6127E4F3546E16DDB0
+:10B500007EFAB8F2F9279F7A0CE2997F32BB07D115
+:10B51000FE573CFFDAFBE3697DC54E31B9844DC36C
+:10B52000CEA574D2C74BFFBF3BB7931E15BF794D55
+:10B530009287B1E7F72476D265C5CEFD1219D615EC
+:10B540001F9383FBA5883D067D82478AC05EA87B4A
+:10B55000E6BF2588339ED8C791D4AC18F8DCFC1A16
+:10B56000DA038027A4A74AAF0EFA19DEF752BA8091
+:10B57000DE36D2CBF8DE2255BF40BF906741F9FBE3
+:10B58000853D9007F591D90D78287F619513E6F3F5
+:10B590008550C3F8FCF17B53409F958BFE141796A2
+:10B5A000EC79F9133F42FE5BF6F68F5230BE4494BD
+:10B5B0007413AE45FE7498E7924DB3709E4B8907A5
+:10B5C000F9B0FC71BE3440CB0B0229DE19434EACFE
+:10B5D0002293932FB650E2D2797E01FE24E8EF77D2
+:10B5E000F8C036B4BBEF24A00F7EA4CE855A0C5809
+:10B5F000BF6061F4FAABBA2E10B03EA3F977EB7DD1
+:10B600002D40A793FD9554D877F112C1AFE283FB8B
+:10B6100096F6CBBF3D2595D189C8429EFA1D5DF7B0
+:10B6200027C37378BF4554AC39BAEFC8B7599DE307
+:10B63000AF56C7A770C7C17AFD454A6CFB354FD4DA
+:10B64000F4005DB7A3F82C4ADE99FC6FBD9FC9BB1F
+:10B6500026FF81E9C5D07EFE309323F80ED6430A3B
+:10B66000573815DBF7CFE4503F503F3A969C6F15A3
+:10B670005539D7B71BF985C22F70F1517C03E324EC
+:10B68000221D70DF65E906FA7D941EF5C2B8CEAEC4
+:10B69000FD6A72BC4CF35B45BD3E209B981EE8DE04
+:10B6A000AEF2239E2AC5C0538F81FC5279F5CB2080
+:10B6B000BF6229CCFFCB1DCDEFCFA372FB655093AA
+:10B6C0005BBD5E35CA6DF9AED12496DC7E69779399
+:10B6D00098724B9FC7945B7B04F9F9FFB45ED5F079
+:10B6E000380CF0784D271E353DD91D3E8D7AF290ED
+:10B6F00020235E8D7A92FE1D26795DF951E3438DFC
+:10B70000FF2A9EABBA02F451079F6A7CD8C1A71AE0
+:10B710001F7689EFEAF0686CBF00FB3414AEF9962F
+:10B720008DD38E5257D2D24E70DF267F268FFBAA42
+:10B7300096F384E5811011F3433F30D58C063B75B9
+:10B74000E2DF6F3D7D1785773EF18B2C2FA05E44A5
+:10B75000BBFFD2B7DF4EA0F399A7E2793E45FB5479
+:10B760004A973902178EA370CE15883F3E11E2B773
+:10B770001CF9340A8EF9E5FA3AFC4D4CE9ECA7A71E
+:10B78000F7BFAB9FF27DCBB7295D3F1D44C8BB50CF
+:10B790008A38BC10CD57D381AE147FDE515C600077
+:10B7A000EAA988501AE577BD2032FBF3EDC219A350
+:10B7B000C1BEC99F3D2C9EF1FB60F47BBDAA3E3B00
+:10B7C000EB97E341CF9F0D65A37F7BF6D02247AC7B
+:10B7D000BCD06695CF5E53F75DDAEC5C3D4FF9BFA8
+:10B7E0008DB4A37DE3B75BC9B618FB821B454D5FE3
+:10B7F000AB74A37F3C1D7F8ECA8773E9A7F1B95153
+:10B80000749B39F584E0EC4A07F8FB34CA0FFBA1BE
+:10B81000F805BE06FC365B2345A531E279CFA9F8D1
+:10B820009B78E06BCCCF2D0CE50B80C7423BAF8BF8
+:10B83000833CA9C9EB503214E09A7860F9CF4753A2
+:10B840003EF61EE2DD908FEB0D9D913C31FC6123B5
+:10B850003EA17FB0338F882EC4D77B62E912C0EB44
+:10B860007BB3AC04F635DF95DC55B1E02C33B3F592
+:10B87000662E29BD308AFBBF0FBFF9B31DE1028AD6
+:10B880008FB37696F7DD95FF98DC9F7571815A0E20
+:10B89000F89067F5642E0071B422E2F9F9040EE520
+:10B8A0007D52B4FECA6F9AFE3CE4F55487389789FE
+:10B8B000B6570B1109F8D8DBB45300FBFD269928C5
+:10B8C000188F106A86CD8C8A7B1D1105C457F3DF53
+:10B8D000E6DD0EF83D37D34C002E65E81927D80178
+:10B8E000E74223510EBA9BD71F7C645AA108FD1072
+:10B8F000E40F233F1425DB74F55993493F37A5DB4B
+:10B90000447364953B06FDEA24C667BDD66F96FF77
+:10B91000CFF4DB04AADF185F8BD1FAED2689F17D25
+:10B92000947E4B8DA5DF56D6CAA9C0172BF766A704
+:10B93000025D57BEB1A44F2CFDF6BA8FF9F76FA880
+:10B9400079E66DFDA87E1B1EA5DFFA51FD1623AE1C
+:10B950003B5AEAA57EB3FCCFC8DFEBA0DF62CCB7D1
+:10B9600058C59FA6DF8A43B5A8DF8AFBF1BA7CA938
+:10B9700049524FFAADEC97B3B02EBA6D31F807F0DB
+:10B980000AFAED0D55CFC138A0E7FE5D727D273D67
+:10B9900057D55B3DF73F84674DCFADECCFA13DD38D
+:10B9A000950F999E5B99C5F4DCCABD4CCFAD1CC404
+:10B9B000F49C51BF1574D16FECFBEA21F47BF423A6
+:10B9C000B37E7D1B6D2F9923BA2DF4FD12593B9F39
+:10B9D00051333A5ADFFDBBD48DBE739FC1732E3DE8
+:10B9E000E9BB3F82BE1B847A6C20C891913F6E1CDC
+:10B9F00068D3E5D3BDF7F5B1E75E0479F9038FFEAF
+:10BA0000F70726E627EDFBFAD84890BBF7001EAAF9
+:10BA1000EF9E51F9AFD5E7477D3A792893F7AA7B96
+:10BA200018FEAA1B3936DFD57C408675E06F17D12A
+:10BA30008FBE7D2FF3A3679B5BFAD8C0CFFF5F2239
+:10BA4000CA25FD2B298BE28739172B30EEB92BCE77
+:10BA5000B905FCCC3902B1801DBBE0D08D27C07E7A
+:10BA60005D70713DDABD0BE07922E9C8FB98DBA17E
+:10BA700027F5F6EBBCA69DAF6590AEF91013CD8C03
+:10BA80002E13577181CD595DF323A85D86F92DC61C
+:10BA90003C89DFABF39FCD47105FE48F7CCCF8E5AA
+:10BAA000EF8D787233BC54ADE6F578AAE162E28995
+:10BAB00052BAA42CA5132FB7BF14599701EDCB3957
+:10BAC000F4B78CF3D6F0669CBF8647CDBF59A0BEB5
+:10BAD0003F3F7424669E8886E72EF9221ADE0DF811
+:10BAE000784BD333D7906120971F983C3F1F0D7C34
+:10BAF000F47B8A170AE7AD7307E9CE2BBDA3E26595
+:10BB0000AAE748618A0C782435C067F3CA77BE96E5
+:10BB100042E777B392950B21F5597F933C108F68DC
+:10BB2000B6B6A31ED4F8709499C98559D52BEFF5F4
+:10BB30007515E27AD3C4B950BEC2063DA7E699791D
+:10BB4000EF61F2D7CCFDF7BA8C518867582E489137
+:10BB5000B65E015DE83FA786185DBC4017FACF6965
+:10BB6000A4FD20E0BD3A997387E1FDA69DF7023F51
+:10BB7000BD6EA5CF41CECB39F716860E7B7ACA654E
+:10BB8000F95888C5C718CCC8EB5C3F17C07B895DE6
+:10BB9000ED9389E696F7008E89546E36C3C300FD97
+:10BBA0002F8AFE46FBC5C8073DE50375C7EFB92AD6
+:10BBB0009E5F073AD801DFED12D843DE305B7FB4D9
+:10BBC00076AF201722DE343A34D1F56514A38329E9
+:10BBD000069E6FD6EA2A9EBD214E84EF6FA0FE6FAF
+:10BBE0001207BB7E5F1FD4F8DD2C77C513C415D2B6
+:10BBF000A3F406E8B7E87DCDEAA6B7115F37AEA695
+:10BC0000E699DC155F1A7D400F5E0E6FDDCA4FD3DB
+:10BC100091987961DF557E4699F5F2B3CFDAFEE669
+:10BC20007088ABEDE550AF9050822E7E30D3CCECD7
+:10BC30009666AB07F9BCFD0DD1BD45EEAA7FA6A85F
+:10BC400074017F25FA7CE2649808E84D97957CA6FC
+:10BC5000CD7B00E3B7E8F5E075AB07E9D75DFF33CF
+:10BC6000CCCCFEEDCE1ED3EAD7C37890D728EBC755
+:10BC700033AE475A5CA9A77979D471BFEFBCB471D0
+:10BC8000BEEBBE8497B4603C4EDB9FD8C37B768905
+:10BC9000603F1673BA7D100A39EE6FFE13FABF5972
+:10BCA0001ADD7DFF103F0A533CBFBEE3498C639F02
+:10BCB0007EF6C834909F15AFF0C442E5AF75878318
+:10BCC00084599E8804764245238FFB5D4408E7CD66
+:10BCD00088B233A827C3F0F1A203F55EC52E73A086
+:10BCE000847E5FF1F26739107F6B5DC3F49FFF596B
+:10BCF000951FFD911CC807A810D8FEBC913E8FA8C7
+:10BD0000FC796AB76D0EE86F6E3B3BC75B119C2DEB
+:10BD10009AA3E20CF79B4516E7DE6DC33C6CFF333C
+:10BD20001CE631037CD1E748B5FCD053CF30BD5C75
+:10BD3000D12406E03C70C5F69DAD1017AFF8D08C4D
+:10BD4000F6AB77FB1909ECD3C92F3ECFCE1B37F1E9
+:10BD5000BA78689738E4763E6C86F8596315EA013C
+:10BD60005A3F82F5A01AF7FB8E71B2152FEE7DD9DE
+:10BD70004F51B8E2374F3BF15C70CB3627C623B743
+:10BD80005F7E5FA04BDC3178BF1A779CFA05C1F566
+:10BD90002176DCF1A4CA2721B33EEE48B627613CE8
+:10BDA00092C299571A237ED1C1FFCF5F7802F6CD98
+:10BDB0004EEDFAF20980BBF29B734FFC94E2932A9A
+:10BDC0002017ACDBDE67DFC37D06EDBBF7557DD208
+:10BDD000FACCD3B84FD3FA27B31B7A6BDDFB4526D9
+:10BDE000EC53B4EEFC3A05E2B8ABF74E417F6DF58B
+:10BDF0004B9353490C7F402B817F03BDD82732D210
+:10BE0000ADB9B13913E03C4DE90EEB77473C3958F9
+:10BE1000C5E2F4B21A47DE117B5FAE4BDCB871C6E7
+:10BE2000CDD7C13ADE28BA65D28BF8F1614ACFE1AD
+:10BE3000BDA0E30E759F2038F5B2F1E3D3F00F4AB1
+:10BE4000AF0B667D1CFE42E392FF7C0CDA1A93BABC
+:10BE50008D1F877B813F6DDF6FBF59211690A35DDA
+:10BE6000CF61DC1EE8477D0FD2FAFC854C88BB1CF5
+:10BE700017DBEFC0FCEBBD66CCA3AAD8FB01CA530D
+:10BE8000EB4B6FE3BE1A51F7DF5A49C71FDB27514F
+:10BE90007D3AEF56078B3BAB7480B8B4ECC4E76ACD
+:10BEA000FC99F1B51697EE2E1E3DD63280EDBFAB54
+:10BEB000FB91555BFF2C1143BC9F1B0BF43A72D9CD
+:10BEC0007D540D0F2EC0C398E8FD96D8F1FF8EFD6E
+:10BED0001603DD809E608F75ECA7D07A3F88AB0794
+:10BEE000B80F62EDDFB56E66FB34AD62ECBC456D3C
+:10BEF000FF65A4C5B0EF12E8DDBE4B4FF3F8AE7896
+:10BF0000CA0627B44F577C9DBA145BBFDF6AE1D4E1
+:10BF10007B03BEE7BE7E2567CC1B98057C59D57890
+:10BF200044027B4A5BDFB4F99E52FDE753CFF278BF
+:10BF30004E645DB019F5BB517F5413163734C25BA4
+:10BF40006E617AABBA89AD1FA776390276DACFA9CE
+:10BF500003BB91AFAB771C91FCB4BF83DB7F234560
+:10BF6000A2F2AC60FD0844C17FEA85FD396C7F898F
+:10BF7000F9EBC671EE52C7F186628FE3DD71463789
+:10BF8000CE0A7F5062E77E2E3FDE4941990DFD9D2E
+:10BF90006C1109E4FD9F0CF2C58118E3CFB5885AF6
+:10BFA0003C8BC90F5D47F11CA6839DBBE41325B4F0
+:10BFB000BB573BC67E08E7FD573B2419E21775B512
+:10BFC0002C2FB5EEDFDC6940EFBA845B713FAEDE4B
+:10BFD000805F57B22B1FE21AAEC2D251C0AE46BD2F
+:10BFE00093A09874F0AF7614A7CA14CEB5AA9D4654
+:10BFF00004379E0BE59D45C5301FDE65725963EC25
+:10C000003B88F652E289C28BE8D29FE3249746CA66
+:10C01000D08F967F53696939888D2E05538C85B1F1
+:10C02000ECDDFC992E9C77DB0ED57F5088EC4A61C5
+:10C030007964B08EB4ED8ACF21C3F143A2507EB4AF
+:10C04000A9CFB91DFBF7835E5AEB244A0295338AC8
+:10C050005599CF86F3AC232C5C36F0E999FF7A85AD
+:10C06000F66B0DF1E857B4D9B57C522501E4CC4606
+:10C070001EC4BC4160E56F933AE134E613127825A3
+:10C08000EA3E8D29BC1DFDA1B39B587C802757FF3C
+:10C090007A028BCF9100C0AFAE2F2B5438CF12E273
+:10C0A0000EC3FB3B1C180F58F6C622941FA0433446
+:10C0B000BE928AF5E75E1BACCE1CF067365A55BFC0
+:10C0C000C6AFB4C0399BC56ABF7D4AF5E762A918FF
+:10C0D000FA415E97A8F2FAE5D2A243988FE6598A10
+:10C0E0007A3E758EFEDCAC314F4B20AA9F1C60FE61
+:10C0F0007397BCADA6CD08B7317F6BC5767D5DC3A8
+:10C10000E327A037AF027412FBE5E2803DE237324D
+:10C11000F8D713467D77FC9AD3F4F8B5CA7AFCDADF
+:10C120008618F1A7C7AFC3ADC797E6977687DFF844
+:10C13000B1FA73C8FF2AFC8A56D58E54F14AFF4AD9
+:10C140002D294C6503DCE94218E5C2284719F63071
+:10C1500007FFEE9F1CA8C5AFDC0ED4EF69EA7CB8E0
+:10C16000C5EC3B1BC8110FF0BA518EE02420E879D2
+:10C170001BF9D875CC0AC4FA8C7C7B4DF7F45C357E
+:10C18000FDD5230BE9579B807F87233FB0F3BE8902
+:10C190002450970572EA76C1FA1DF459DC8B45B834
+:10C1A000F785B8170F82FB5E5C583EA4E6ABB40D72
+:10C1B00025786E30183E9F02FAE9A1DCF669A0F7F7
+:10C1C000BC4B4829E8C11FC5B1F3030FA865BF38B0
+:10C1D00049D5AB856F4C82EF43A20CE7D5DB42DB40
+:10C1E0002C83A0DEC4E33D2ADE84FAAB60FCD6904B
+:10C1F000C8E05A6C090C8238C85E11C76D5D3C01FD
+:10C20000CF6576D86F21962FD216FACCB9284A9FDF
+:10C21000B7363D7A15C4B9369A62E7A94CB19A7E11
+:10C22000D8FA1BEC92B737C5CAF2EA1E1A40E7519A
+:10C230003DFDACBA0E3379B856A5F3AB4B6FC4F9DC
+:10C24000BF14E26458478AF8DB6E1A46E739EE3DC0
+:10C25000418DCFB078E528F5FD3AD02FA85FEBDF10
+:10C26000E5E9C3DD470502E7F446D52C457FEB152C
+:10C2700027E573CA17794A7024F06D612801EFCD64
+:10C28000F17E4CD0AE1FDD22E8F8334F5D57F3222C
+:10C29000545EC044F950DF3E2E2218ECA0000FFC83
+:10C2A00075ED71FDF38556D5EE729214E0F30D979E
+:10C2B000780EF25EDBDA897B0D85BB6D715F84A33E
+:10C2C000ED3C9CFAA5E525BE38D67ABFCACAF8620D
+:10C2D000A344709DD9B8D48EF1C5034B2BAE80F525
+:10C2E000FDAB1F7BAE88758E3C4A3FC5B37C2C25C9
+:10C2F0009E8C05FE5ECB31BCD7A797C6C8F7D7F892
+:10C3000059E36F8DAFD397C67962E5357E63657665
+:10C310005AC1D2219C04FEDA3E0E8FE3B6AEF15C28
+:10C32000F6DC8D9FACC90078BC4DE7D0EEB6843802
+:10C330002596BDB1C1EAC4FE5BD7F86B218FEF2E05
+:10C340002A9CA027BBEF7703FA5B3F81A02C7C6778
+:10C35000A92FC373BC4B2C640BC4BB85FAF45B1CC4
+:10C36000C0FF936F5847E17DACD484EBEB46D18D91
+:10C37000F0FBAB08C1F8831ACFED378D6C8E3ECF42
+:10C38000FC8435FF592BA5C7B35617D225C9E3E660
+:10C39000007EF73FFEDB09F2DD76D18C74ECABFA60
+:10C3A00043DA77AF5999DD36334ED90ADF93F26419
+:10C3B0009413B7C7E95E3C12EE4DA0788F92A34E5E
+:10C3C000FAF9F1BB440FD571149E44BB09F99228C8
+:10C3D0008AECD2C529FD28479A5C903047208F4DC2
+:10C3E000D3AB5C880B3BA81C8CB2D8C3E0772496F7
+:10C3F000D3795310ACC4C2FA6B114E759CCBC63CBA
+:10C4000079CA977970388A6048141271A17F4DDF1C
+:10C410006A7A7A6D02417959FBB010A8A3FD6C12BB
+:10C42000225688AF64297201A41A250A329E17EF9A
+:10C430005F4E30FFD296FD784287DD42857EC4375D
+:10C44000FC8258FB797C9C862FCF1F406FE41C6ACE
+:10C450003F00E68DDBCAC673BF66413BBD437FA884
+:10C46000F65891BAFE8EFBDCC4F209C29348F43E42
+:10C470009B517F68F6C9B8EB226B60BF68DC9F18E0
+:10C480009CB45B05BE1BADCEB7439FA8EBE69810EE
+:10C49000D527F4FBDCD0C866B8072BF76326C75D49
+:10C4A000F4C9213F0FF8FBBE7AC4C81723C2542E2B
+:10C4B000D5F6A132DCA7E1EAA843FB1983DE499E49
+:10C4C0003E2A15ED5C95DF8C78D6E4DB28F7B9774A
+:10C4D000BB9BCD0C2EE6471AC6215C271C7236E8A2
+:10C4E000A5B778B0F7DBF2291E285CBF02F9A3F4E8
+:10C4F0004B381FB801E6BF2174BD15E4E47BAF27BC
+:10C5000021FA75549EF6D3BC273EAE0FAE274EC01F
+:10C5100043F5FEF3EA7A12467A77C8019593E878F4
+:10C5200089C6FF467ED7E4A30E2EDEC8C673760406
+:10C53000D6599E0BE2653066B2C90578D5ECED3A66
+:10C54000D5BE25FE74B4FF56BB88BA1E6506804F63
+:10C55000EA44CD5E775BA2E353AB1D05A997DB4FA1
+:10C56000F55EA4FE59D4391BAFD08EFE9BF7A28492
+:10C57000CFBF37FE9A2814793AFC8D891BDD157FD1
+:10C58000F17184B0FBC2FE9F9FDF0C237FDC277715
+:10C59000CEEF5AE2792542F547DEAAF57536193F06
+:10C5A000399C96D7552F68FB9FDDE901A3BC8FA965
+:10C5B000AC6FC6704B0FF2EEB5A9F8256406E8B370
+:10C5C000F1616AB7647595FFF3EAFCBC3686F7B68D
+:10C5D0005BDB07833CADE73D3571682F464C26B0E9
+:10C5E0002B7613B47BDCFB8F3A51DE5B9274EB4FFE
+:10C5F00057BBC08FF2A9D9A79A5D6A7CAFC32E55ED
+:10C60000D71B2D3ECA355179A1F03C19E7F1031C27
+:10C61000752EE6BFC20157D0634F583D75C05F36D7
+:10C620003A9738D82F1912CE62F196B04E3EBB938E
+:10C63000479B41DE82143FB0FEF9E9FA3788EB1ED2
+:10C640009EB171090C5EAA85C0BEE99747D860D536
+:10C6500004F3C7FBE5B0FB6BFAE5B2FB3237C73139
+:10C66000FB658BA17CC25AFA18CC4B1488DF9CFB6B
+:10C67000FDE10650210EF9649CD200F8B0142B386D
+:10C680008F0C17717394DE19429083BC89C44A9948
+:10C6900063F147D2B9FF48FBCB2891F3813F3206C3
+:10C6A000123C379A118A7D9EE89538F187D9EB8D37
+:10C6B0005DCEC1BCA2CACF4189CE37A9849D83E992
+:10C6C00088FB50F001BFAD8E5B71B2AD17D83EABA9
+:10C6D0003F81E1D9E8BF01C1605E825ABF57228223
+:10C6E0003511FD2B3FF0AFDF6441FFCA46DC41D07E
+:10C6F000B71FC4B1F8EC3ACEBD1EEABF10DA2D70F8
+:10C70000CF8F26379A3C3C34E116B7405F755E7791
+:10C7100036077C5F2A17EF009E5B279C1DBC1667BF
+:10C72000D29EC9F84EE175F9F61AFD9A441DFDAC8A
+:10C73000105789D6F30E6908D8EDAD5C9C1BFCAA96
+:10C74000D6E51C8397B3A8E71104DD3CD36CCC1F5E
+:10C750006953F5E7DFE3B2901FB5F584CE6F3DC6B0
+:10C760007F0DF3E838876A38776A3C979A96DD112F
+:10C77000074AC77CDC5209EE3223674336B4E3BC78
+:10C78000CEF64C12E3BC646AC41AF35CB05652BCD9
+:10C790007D0D784B156B12401FA7DECEF488111F5C
+:10C7A0006D9C7FC441D847FB8318331F452BD3D2E0
+:10C7B0006E4A584CDF4F4BBF014BED79835D8819B2
+:10C7C000574CB2713FECDC6403B118FCCD241BED77
+:10C7D000EFB4E79DF71514FF768CBB37C431BC3737
+:10C7E000C431BC37481A3EE57890BFCEBA5B97F7A4
+:10C7F000B4C1674910200FD19F8EF2B9C4C5E8DDDE
+:10C80000F9BE82F64D1FA2DC301794C406916C432A
+:10C81000BE67F121ED7CC8AF7CCF2440BE94DB968F
+:10C82000A5FAFB1646DF0406F7F90D5370DC14B2C7
+:10C83000C63A98E27969A9C90D71A3D30B3F72C2B8
+:10C8400091E985192D79200FA7798F1BE6974A98D2
+:10C850005FB86C8E1408D32E931BA8C26274BA0101
+:10C86000F73BCB4C31F3AEC7D8D8FEE9D138179699
+:10C870006969D3904E9DF59204F04B8C7C4AE53566
+:10C880007DF1A8CE73CC946F145B0C796B134913B4
+:10C8900087EB5B18F195ACB1B3AAB7357949063986
+:10C8A000847DAB52AA47353A0F505F4DC1B828FE80
+:10C8B00071A1D7BF067FC3795D01EA454D8EC810CF
+:10C8C000A6E7ADA077A3E2A16D7B3FE80FFB8E9FAB
+:10C8D000FCDB3907EC3BFD556877809E3D7ECFBB86
+:10C8E0000E38C7F4C93D2C2E7287C14F5B6463FAC2
+:10C8F0007F8FAD741EE07781EF1F799E287E2577AC
+:10C90000B3FD93E501DE70DE5D7F6F505530C97079
+:10C910008F901FF15AA5DE1F66A4C7461B8BB72C4C
+:10C92000DFB159CA90617C4F258C7F5CF5438F370E
+:10C930003AD0DFD1E059B8638404BED95F4366754D
+:10C94000FFBD4564EB875202FB671E156F46380F2B
+:10C95000AAF76A2FF925CB8F29A363DD4DF5B02700
+:10C96000C4CE7B18E7B1E413B92895126FC9FD1C3A
+:10C97000FADDF0FE3D743DF3DC7D1FEEB319E7D91F
+:10C98000F55E1F05FDB3652ABD8DE76D9785D83E21
+:10C99000F862E241F9EC72FE36C4CEC518E38D6749
+:10C9A0000F65DB000FBFB0A9F1C43C3206CE6DEFBE
+:10C9B0003A3420FE72F7569F52EF8B827BBBA13C2C
+:10C9C000EE2358CE032390E2BF32F4F65DC05FD56C
+:10C9D0004D3BF13EB4EFAA8FAA42279C904BADE9A4
+:10C9E000256A876E03F9208B399D7D5ABDF99CC459
+:10C9F000FC6A869FDBD4E7B7013E7220DF5BFED97D
+:10CA0000044AEFDB2AC5F3D1F7A53D6FD3EFC3F797
+:10CA100076BEDA3CB5796BED556A5E9CF13B4D0E06
+:10CA2000E6A97CB978EBF4757D298AEAF67E91A9AE
+:10CA30009E93C3F3421A9F2D23A545E931F849A3DC
+:10CA40006F07DF847E8EF3D3E8BAB8BE4CC5833F50
+:10CA50004DDD4F4C837895918F7A3AA7DD2A463287
+:10CA600041BE8D7CD2DACD7D28211BB32F16CB4A57
+:10CA700011C4CFA8F9BBCE1565DF1C17EA0FFE1451
+:10CA8000E46E2BE3FB0E3D084E31E8F737455CFFC3
+:10CA9000573AE454B8FF0FE9370EF213CC7E784FC3
+:10CAA0001BE7984F51068A80FF622C4FFA4A958106
+:10CAB000833ADB976E3CE704FBBB6D08C1B851AB12
+:10CAC000430FEF691B8F7AE3B44A8F4AA1E59B3F7E
+:10CAD00083CEDADA827917C72EA971A74BE6E2581E
+:10CAE000F3B4D839DDBD7877A872A8F9350B54FABC
+:10CAF000DD1162FBE90B374D477A74C9BF54FDA1C4
+:10CB0000B2460EF58E913E4BDCD7633EDAA2403E34
+:10CB10007EDF855EE441A4BB916E77DA5DEC1E3763
+:10CB2000A146827BED8E6DE270FF7185107BFF73F5
+:10CB3000B6DDF49DE6639C4777F02FDB5ABBAE2F42
+:10CB400081F98F9080CF8DF06BF35F4214A6A7D44C
+:10CB5000F976372F1299C4F234D4757F399C5B81F2
+:10CB6000FD93077996CFADC6A134F835788DF328BB
+:10CB7000E22BF17C415B038F79D977F8D97D067779
+:10CB8000ACE570FDED8E4E9A5ED1F67BAA9BCA3065
+:10CB90006FCB43FB013BB6ED63C2F629D67378CF6A
+:10CBA0005BB7F40CB17CA5EEE84908A3DB624A3719
+:10CBB000F03FBBDE9F90AF0C8CDE270ADCA00C8C14
+:10CBC000DEB72241CC5759B17DBAEEF98D76358E5C
+:10CBD000A5EAF59EE48FD424C48C6F69F2A6C99FA0
+:10CBE000268F77DA65666F0A81831959809F87D10E
+:10CBF000BFA1FA7A9E9DF93D0FCDA5AF546F3CA71A
+:10CC0000DBA7583296D16B095F82CFBBD3BB140F21
+:10CC10003ABDBDD8AECFC3F8A1F3D1E6A1C98936DC
+:10CC20003FA39C18BF37D2438BEF19E962A407C01A
+:10CC3000097EC65B7B6D813514CEB73806B77FAFF2
+:10CC400015E16E4D9BACC0B9CDEAF4F958FE013E3A
+:10CC50004C07FBB0B4CE8E76AEEA878DEA5D5C22DF
+:10CC600057B5CB5EB22A23D9B9A7D224E09389B5B0
+:10CC700091191617218F3E585C04F7A44E7C383268
+:10CC80000342F1BF7EF04656DF1679D7E286FBFC01
+:10CC90004B8A0A69FD71D02FA02FFA95DBE0FB6E5D
+:10CCA000EBC473F9BACCDE1F652E9DCFEEB166EDF5
+:10CCB00095D43EB3D0F5AEF2F0E057417E2B5B4AFF
+:10CCC0008A212E54091178BADE5529CEB02D87ADB0
+:10CCD000FBE3E97B1FD93C4FD921EE76712DAE8B5A
+:10CCE000958705942F7288C567053A572BFD6E6DA1
+:10CCF0001CB593297ED7265ADCE017D3E77EF09740
+:10CD0000D7262AB21CF55CA31F7C0770AC35B17C1A
+:10CD100082FD6F0C8E8F5CC62ED8EF2325E0CF34BA
+:10CD2000FB2C581ADBF325179EE7C837B17889B179
+:10CD3000FD6DBB76AE49CE00BEA83E24A1FCC31F4C
+:10CD4000D89F5584C9493561E7D0AA0E133C775363
+:10CD50007DA808CFDDC0B9844F757AE05F73EEA679
+:10CD600093AF189E0A04AE44881AB7D06ED5D5F991
+:10CD700054D310980FE1E3DC706E84CF30D5ECA271
+:10CD8000F3E7AFA025C587E072F370FF4CFDE4899F
+:10CD90003CDC9F5527AA792D26763EBE63DD57E5FC
+:10CDA0004F2BFB394A8F02DD4FFFB125CFC6F6531B
+:10CDB000D0AFD6E65BC72984037FED3582E71972D1
+:10CDC000934933E0CF4694B1C06F1647A2CA976C1F
+:10CDD0003F9BFE6540E9369B7E23537EFFFAC19F51
+:10CDE00022FFBBE34DABB2689D73F8593DC3742E6F
+:10CDF0008BB230EFA865F56B4CE706D0BAE858C3A4
+:10CE0000EAB0F14A173EB3A3AEC83F14C67131BAB7
+:10CE1000EE50AE01FE164C2CAE231C90707F47CB1B
+:10CE200057594B7906F8D1E2607A745D6DC173365B
+:10CE3000889B172832E44FEC51EF41FABEA5865784
+:10CE4000DE66427F094AC07FBC83E153A30B69546D
+:10CE5000AE813C5E1254AE817DBD7E0E4FA2837EBC
+:10CE60003FF2AD9689A0CF1BDFF9280FEF73BF8289
+:10CE7000F533F22DEA43D2F99CFE6DFFCDD1FBE4F0
+:10CE8000FD1CF9A9F01D2503DAAF9CEC22B751393E
+:10CE9000AC53882C65839FADF72F1B09D34F1FD947
+:10CEA0004AAF70A03E09E33AF613BB6700D48D7E0B
+:10CEB000336949EC55DE9D947337EE172566347D52
+:10CEC000B810D685DFB17B4A3845C1FCD3173BEE9D
+:10CED0006B231897B2913837C48D899BA4F953D42A
+:10CEE000F89A89F155725E94FFACCE877E5F08791F
+:10CEF000F2636C2CBF81CE8F07FD3A82C8588E84B6
+:10CF0000385936A0D883F53D24F8E14F69FF8F5892
+:10CF1000597CCAB29DE8E28F650E16B779C0C9E2A6
+:10CF20008F7162F016B02BE2CE1017D8156D8F4BB3
+:10CF300002EECF0BAE9B70DFEEA009E3DC4F8B015E
+:10CF400017EC17B55F25C85B48677F6D2ADDB57E96
+:10CF50001F91E4AB20EEF70B27AB3F9D4F308FBB0B
+:10CF6000FD841480FDDCC40C4B4D743C699E83D958
+:10CF7000BBBF7315CC043A04F7C611187FCCBE387A
+:10CF800013D0E3B91DB956E08B170147140F89661A
+:10CF9000D79DD05FE2390A6F163E67F9FD823C22C9
+:10CFA0009EE277FC8D7619EED17ADA1ABC11F3562F
+:10CFB0009F37E1BDC12F4AEEE9507FF1ACEC023D55
+:10CFC000FC7456300EE7F3BC09E7F3625CFBD52B2B
+:10CFD00029DC0F0C61F12EC14604D0CF82A940BEDE
+:10CFE000933E5FAEF2B1A6AF37811CD1FA231CC1CC
+:10CFF000730C82291FE548CB276A6B27984FD467AB
+:10D00000660B0FFC1C375D8B3B857988174D2825F7
+:10D0100068CF4DB08B78CE05F299E1BCDB44550F5B
+:10D020004FFCB8B284E507BB0FC3BD9ECD76F57E3D
+:10D0300030759F7392CA27D791086FA1EDD75D24F1
+:10D040006E88274DBAA8DF8F78CA605F4E51FB57B4
+:10D05000DA5D85F0389FE8EDBF290D4527603D2C4E
+:10D06000208A00FC34D96268073BD209F7F0EB9FB5
+:10D070003FE050FDDC4C92199DC7A6ED434DE18782
+:10D080006E44FBB55872035E76DA950F203FC0DF21
+:10D090002292CBC5259FF2B17CC321176D04AE2C23
+:10D0A000A4FC6987F95CDD50EFB7D2795F3D90F55C
+:10D0B0000F7C08FAE5CAC7939340DF8F57E9A5951F
+:10D0C0001ADF017FB9E2197FB98677CAE7D38E2CC0
+:10D0D0007C4F9337E03BE8678F18981F6BBF9BF23C
+:10D0E000EBD3C0AF3BED04FDB89FA55BE6809C6928
+:10D0F000E3B4AA7C6D2CD7D5AEDC0FBFFBE4BFC078
+:10D10000D68DC2BE17A5E875BF4F0283D72BD7CFE8
+:10D11000980679687611F3CC52D47351D1FC921EE3
+:10D12000C52F1ADFB5DA599C48E39FC9BBDFE5E19B
+:10D13000F9E40B84B8B24887BFA2F1CF447F18F757
+:10D14000812712E69F18F9675737FC937F5E1640D8
+:10D150006F75E19F438C7FBAE31BDA0FDE6B61E4EE
+:10D160009F771CAABDDD2DFF5CC2F3FCABF74EBE62
+:10D17000EC7E65934F9F9F6A2CC7D962E72FBB5403
+:10D18000BCEF96EA6FCA01BD31D5C4CEEF0924E3E6
+:10D19000160AEFEE38EDDEFC9A6CA8EF14981EDA52
+:10D1A0001932A31EDA69F778307E9B6661E757056E
+:10D1B0004F04CE23B8FB5AE4E8DF21D9EE6076585D
+:10D1C000500C8FFB02ECF137181F8C9D9ACB432A31
+:10D1D0005AFA62A617461D9736C3EFCF3DEACCBF79
+:10D1E000007C9606B8A3DF798F4A78CF52F55109B3
+:10D1F000F5E36FF7BD5D04F1512DCF79CC9EB78B70
+:10D200000A86C2FB8CDFFEA1EA65AD8E4740405F17
+:10D210001AEEDD1FD7711E4B7F6F7E29F0514E67CE
+:10D22000BBF13EF9601CDB3F994D6411869871B4E7
+:10D23000F45EB8DECC78AFFCEC303BFF36F3B027C1
+:10D24000F6BDF22A7F18EF37A7F6778A13ECEFE7DF
+:10D250005AF6416884C86CDD0E4A35D7303FA326A4
+:10D260001BF8499343FCA3F80B7E3244F7BB06B787
+:10D27000A9F37FD02DB0FBA92212EE4BFE9CB0EF9C
+:10D2800082EA3A36CAC9F440EEEA17E6039C23CB99
+:10D290009566A0CBB32E16D7F905095BB2816E6EE9
+:10D2A00001F75382A23CF90BAEF33D22940EB1D3A9
+:10D2B000F63D7DE246C2F88F3A3D639C609F09EDE2
+:10D2C00087E0BB31E37347821EB78F589B04EB9A0C
+:10D2D000063785AB789BBD130E0DAE814EC6978F7A
+:10D2E0003ACBC6001EE03BD04B4D478E59E07B8DBC
+:10D2F0001F827BCF303E88E20BE0834EBEE01640BB
+:10D300005DC383A2AECFB7FD8BF8428B6BF4C81719
+:10D3100010B7707E2FBE980B7835F205B5E73CCE7E
+:10D3200018F65C50627993C6E73FB1E7E3FB6E897C
+:10D3300060DE13D96765BF6BE849C07D90DFB8D860
+:10D34000986D9F1CCBA4A62859E56476BDF63B2AB0
+:10D3500023C21CDA9F23A8A2B80DEDBC7EA827DD4E
+:10D360002AFEC8318E83FB4631373E03ECD0701263
+:10D37000D86B23CC256190875DB68919603FE6DACA
+:10D380002664C3FC5F1EB2FA4D58D25EEE5BFE9B74
+:10D39000AD72A77DA5E9C366B55B6DFC352A7F4CF0
+:10D3A00052D87927D0EBD17068EB039009E0E0C246
+:10D3B000B34DDFDA508F8722146F93000E8A87FDFA
+:10D3C0001C6904FB21DFA4244F063BB04F580038F2
+:10D3D000DBF67E9D09F1CE92D0EB1F02BC25DA3E32
+:10D3E000AC5BBF0F6BB4B7357B48F33F347B49F37D
+:10D3F0007BC1AE82F632D51F7199D9BED884B005F3
+:10D40000EF5378E4AC7C95A2CAB340E751A2CEE3D7
+:10D4100066D2827069F7A94C53F1517288FAAB3920
+:10D42000D04EC8548A87A9EA7D2A53DDFAFB226EC2
+:10D430001E1BFB3E15AD9F9EDE37AE1BD71AF6A313
+:10D440007E6879C8C7EE4FF9BD8FF9C3E307F07E58
+:10D4500001D6DFB159ECFE0917C3C32129F63A768C
+:10D460005195EBF1A6480E9CC7DEBFE7EFB86E1EE4
+:10D47000D8F3F7F7C18E1C77422090973BFEC4A8E3
+:10D4800078CC0F182B235F69FD7A3F6FB411F69C9F
+:10D4900044FFDECC410A8F7225C067C1F295538FDD
+:10D4A0003C0AFD9D3F2A90E8731F45926720C4E522
+:10D4B0008BD4DF1D3AC8317B4A6B3FA8FEDEC71113
+:10D4C000956F212143BB67C51C45E7A9EAFD1F1ADB
+:10D4D0005DA71E2F3E21E474A50FFCFD33E2105A18
+:10D4E000FCE19CAA0F49F39FF07CCEF58D770A6092
+:10D4F000BF5F9FC613256ADC1B64EAE947C5214E5E
+:10D500003A0DF66FF3338F4E83BCE5B7784C81F458
+:10D510008676BE9903F5163EE6BD2A46FC5E1FBA26
+:10D5200013EF55991BCFE4A3A7F1C75F4DF96438FA
+:10D53000D09D303B308FDD4B62A4EF813DFF9114D5
+:10D5400019DA3DBEBBA3BF910EAF9C2AC07DAC9E35
+:10D55000E861E4DB7D749EFE2BE177532DC48FBF21
+:10D560009BEAC2FAABBE34AC6BFCEADDFB6412D8BA
+:10D57000791A9F4E49627C336EF7A349C4DE492F66
+:10D5800023DE86C533FE7FC9AAD925EE59D3E8A389
+:10D5900077E93A848CEA272D903756AAC23AFB7075
+:10D5A00011DA25443DCF625CDF66F3B74D0175DAD1
+:10D5B000D3EFFECC94CB7AF57B39C56FD50BB00E8B
+:10D5C0001609AB991E53ED780D1E239DDF23A50888
+:10D5D0007F77F019F9C008E74B1DF9F60AAE07DAB4
+:10D5E000EFE0CC18982526C69887868F9984AEC719
+:10D5F000D9BD5F8F6F8CD7DBEFE78E17FE11D0DAC6
+:10D600009DBC19E9666CD7F447110C908BA51FECF3
+:10D6100093B9F12948DFA28B1251E83A43FAE9CFD6
+:10D62000F593922B91DF56B9D8B3EEF8ADFA224FAD
+:10D630003C233BF94E6C7AD8067CB75BA8B7411CFB
+:10D64000F53AFBF43A10BDC2CF0B66E2FD1511139B
+:10D6500081D0DA94D099668833783F2478BEA120AF
+:10D66000B47F32F0E9AB420BFA596DE7097938CA59
+:10D67000EE6C0AD5D9C02E6B4A66E7F30E26105D14
+:10D68000FEF4C578A66F9A8E9E9DA6C4681FEE62B2
+:10D69000FC3C8328C939F49F45EB297F801FDCC7F8
+:10D6A00081719242CEFD5A32D82D7339F423DAF6C5
+:10D6B0008E792D99C2DB7A7B02EA99294DF7DDE953
+:10D6C000A28408FE63243E6F2FE3F0FE8422D98DEE
+:10D6D000F5A2C559E8F78DF926694609B4DF20A2FD
+:10D6E000DF3385AF14205E753A8DC3AB3CF6709185
+:10D6F0005AF83D62FF74360E71F993C03F7DA7243E
+:10D700006904FE669EACD507E1EF2E1283FFB6FAE0
+:10D71000A573FBCDB47DF52C0EF38DA7B832883FF1
+:10D720008A7F8AD64B38AF5B42A905C0D7338AF5CA
+:10D73000E71EC3AA3D39ABD44602D1FBF99C0BE5E9
+:10D74000FAA0B5FD56FC1DF1BD2281F969727EA3D8
+:10D75000CAEFB3E724E9BE9B4E98DDA9C9D54DAA0F
+:10D76000FCDDA8FACD733D19BAF14B09B387FE4031
+:10D77000DA0B8164F7B8D87EF4B4F696C3F3E125EA
+:10D78000BEDF68D087370D31F8BD7CE55AE48B34B5
+:10D79000CE8DF7C8B8F5ED378FD5D78DF26BD40F96
+:10D7A000B3208B8FEFAA27347D306B2F2F423C683C
+:10D7B000563EC533DAC57ABBBD277D3126AE1B7D0B
+:10D7C0007149BE17CC902EFAE2E3E2EFA52F7E4B13
+:10D7D000DD96B154AEDF8E57D7CDFEA43FE88D293C
+:10D7E000FC8E47818FDAE8BA698EC147DABAA3C5E1
+:10D7F000018AA81CA31E38C5F663A65C4C27FE91BF
+:10D800009D71800E3D42ED12770C7BA9353E1BE5E4
+:10D81000AB43EF687A25CA2E11F37EB85D3285DA04
+:10D82000A3522EC0D70FE12B52EF252982842B88DB
+:10D830001FA69DC1389057A0FE2CAECF4F227F81EE
+:10D84000FEE3123BE5C368AF6871E80A97664FE9EB
+:10D85000F9A5231E3993DDC3AAF14911E013E47F32
+:10D86000268FFB04FF1BD47F03B300800000000061
+:10D870001F8B08000000000000FFC57C097854558C
+:10D8800096F079F55E2D495592AA6C148BF012B67C
+:10D890008424588480EC165958A314A080CB688146
+:10D8A0000B6B129A719CEE69FFA642024343B78349
+:10D8B000D2DACEE8F457D83A831AB40801039DD0DF
+:10D8C00015504C5834082EF8D91A6D1AD10E4984C7
+:10D8D000D646BBBFCFFF9C73EF4BAA2A854DFFFFF7
+:10D8E0003FDF9FB47DB9EFDE77EFB9673FE79E97E3
+:10D8F000DB9B55B3AD08E0F6998A071400D0F177A9
+:10D9000022C042E07FC3ACAD16F08EC7BED7FC6923
+:10D91000870DF8E73BFC2F9C90FC2CA450CF0B907C
+:10D9200009B054CE5FFC577D333D5E3C277AFE52F2
+:10D9300098FDB9920C701BF8CD301CF7F3C58EFF23
+:10D94000EC4B15C7972E8B7E9EE94C4ABF9087FF04
+:10D95000180123BE5301CAD4BA9DB722BCDD275596
+:10D960008F554C33D1FE0F39C5FE0F35970C807C97
+:10D9700080DF7416A7F8B13DB611211C0DD0BAD1C5
+:10D98000C6ED71EC07F1C5EFE8E7663C9F05FC21A9
+:10D9900007B6B45221B701480518EDC4452760FF0A
+:10D9A0002A9E3F0DC78624C0EF73245CD900AFE7E1
+:10D9B00098E704F1BDC3B85E00D70DE3FA015CF748
+:10D9C000C84627F75FDBE8E6FE0D2E446A06C0FA7C
+:10D9D0001427AF372FF776871FDF5BE3CCE6E750DE
+:10D9E0003EDA44F836E02F7B6A080410DFAF77ACEC
+:10D9F000D09474802AB7E2B166F5D1014FE3588E16
+:10DA0000F3CB25BE2BB72A10C4E7E51FAE2B07C406
+:10DA10005F5733EE87F8A92A558336FC6749D363ED
+:10DA20003B45DF0CD608FADE228E0233B516CD86D2
+:10DA3000FB2CF0281E15F7F13689F76FF52A411DEA
+:10DA4000FF798B279A1E8763E8BE58AEB380FE0F1E
+:10DA5000DF5B30470986719D0593A2DF5B7C75D63D
+:10DA6000E7CAD8FE7CB498E83EB63FBFDC4E74B738
+:10DA7000E33F86C130A2FB958BA56F8D853EBAC56D
+:10DA8000B6B1748E1DBF169DEF273A675C9BCEC65C
+:10DA9000FB7F8BCE0F114E90BE70F41B8B9E04301B
+:10DAA000BBE9071AD179F6558DD7AD32CE3314863E
+:10DAB000D279FED459F86FB742DFFCAAA62F2DFE0B
+:10DAC000826B9FE76FEDBF2245E7FD695F6F7EDFE9
+:10DAD000BEF33480C178CEF939D1F88DA56B2CBD59
+:10DAE00016CAF762E9B535E61C065DA013996860B1
+:10DAF0001CBC5F55198E6BD1AD972E16FF084F7E5B
+:10DB0000FF71805FF3B9FAD693748276CD5720E027
+:10DB10003247C803F2752005E95BDE0AE14404ECF4
+:10DB2000968B733ED7A8F528F069C439E8E753838C
+:10DB3000CE6ADFFA655707B2FC19FB966910B0147C
+:10DB4000D2732197B1F055D23A23697E80F968CB20
+:10DB50002ED3B2109E63BA05EEF5519B28DA034E20
+:10DB6000A1071A9D265EB7FB2B9B096E0478E5F092
+:10DB7000806240F83C56E709D28B2133F0FB45C95F
+:10DB80003ACFDF9C048104DC1FB4769B0FF9442B51
+:10DB900006C84139D306598235B8649D16F691DC22
+:10DBA000757B34A846B9BBD178EF48E02E40926C23
+:10DBB000FE7494A9268BDE0FB74FC57937156AFA24
+:10DBC000369CE2B2EA3FA0F1AE66AB93DEEB3EF8E4
+:10DBD000CF2D665AE72BF02084F05A3332158E4F42
+:10DBE000739883A437CAD493AA09FBDD3D00A48FA0
+:10DBF000A62D0B9700D26D3AB4D738B19D42748CE4
+:10DC000043BFBFD0793384DE1A88749A21E9344344
+:10DC1000EAAB926695F54649921A84AC3EFD74B320
+:10DC2000A4D18C407B490AEE3B43533C35D8BFF925
+:10DC3000AA16C58F2F933EBAB14F1F95C9F5BD3DAA
+:10DC4000BA869601664234FF96350A3D54628B7956
+:10DC50002EED0FBEC97C55E68C1E9F42BA13F9FB10
+:10DC6000628C5E8218FB53A6FE35B903F1F08AC5BB
+:10DC7000FBDE5484BBE7B4199EC5E770113B93FBF0
+:10DC8000E3A731C61EC5B6070F277A7584EB15E2E8
+:10DC90002307F50779F5B1D79E3FB6A3A7988EF174
+:10DCA0004ADD220DB2992DCFBA33FBF0DE0FBF92C1
+:10DCB0000EB178AD977ADEDBE87C8D8EDB0F8FAD11
+:10DCC000B3D89E97FC49D748F5FDBDF834E4E595F7
+:10DCD0000B895EE2FF572E0CF2B2FD4AD2593E0C80
+:10DCE000793878FE7222E951C4A7AE219FF4B86C4E
+:10DCF0009E67999F851C84068E0A6EC3FE8524C18B
+:10DD0000F7AF24F61CCF23BCDF62F23C4BDB68EBA1
+:10DD1000872F2A20FDB975D1793380E205E5872860
+:10DD20004F8AEE84BBB10DA03C11FF055221487211
+:10DD3000628610D0BE355E789ADA19D3F414C2FB2D
+:10DD4000655CB3DD41EBE929C4F7F0D72B137D0502
+:10DD5000FDF15FBF117C1AEED3B0D1E6D3502F1C7A
+:10DD6000D8E8E47EE34637B78736EADC6E3A91FCC2
+:10DD700043F21FAABC169F16A157E6A50AFD300361
+:10DD8000F50EC13503946000796FC623C0F2887226
+:10DD900010DCA410BDF03C397DF844FA5CEE88E854
+:10DDA00043AD563B2193A582E95E9867E2F7D1091E
+:10DDB000083E9FD57F3ED23FAABF8CFC1684C3EF9E
+:10DDC000F296B9B00D397CB35D88DF7A65E9D14B45
+:10DDD000C0FDB9F4BC5EB943BD84EB8F0FCF841F87
+:10DDE000A2BD188F8421BCE2CF5D04FF84160B1006
+:10DDF0007DD0B0B27C161AF2F9B5A25CC0FD4884A1
+:10DE0000BE1B8CEF59CBC3C44F07A0238DF05E64BB
+:10DE1000F3D9497E97B9043F7895DBDD0AAE3739EF
+:10DE2000C3E25109B4E1BEF1EB117F2D19B821CE47
+:10DE30006F69C91CA2E713B7BDF13EC9B7D7E608A1
+:10DE4000AB6C98CC9D1D11F67C003CE3247F927452
+:10DE5000DC7768475A3F4E0EB09EBB6A09925E6BF4
+:10DE60003D93EC09E33ED3AFDAD8BFACA717516EB0
+:10DE70000F27268F653D13420D43F26313E7986D1C
+:10DE8000F6AF233CA0653E7A0ADFFBED6500D2AF1A
+:10DE9000D3DB3F54C90F2D31E50EE840388F2AA35C
+:10DEA00053A87DF2E3E47C6ECF2477127E0E9BECC8
+:10DEB0003AEDFBCE46BD7404F2CBA98D503A02F97F
+:10DEC000E3AD8D366E4F6F74727B66A39BDBA33818
+:10DED0004EFCF33A8E137FBD81E3D46FC3716A4F5A
+:10DEE000E03AD47ADF7298487E67BCE5D0A82DBCB2
+:10DEF0002B89DBFA3B932C748EC3C95067EC4FFC23
+:10DF0000144E0C378007E52ED5FD53DB0D683FAD71
+:10DF1000FE02651CC0D454F75C6D3AAE3B7BE88FC3
+:10DF2000BEC2F119A9C37E6A43786F3BE3683889A2
+:10DF3000FDD2C7F59F3A883F4F24A292243C64B794
+:10DF4000795136C793D218C468F7C224ECA719FDDB
+:10DF5000ECB9A5C80A4B4A3AF2C005B0F3B1E17377
+:10DF60006D88DF2576FF3F51DF12689B533A9DFA9B
+:10DF7000107092BC2BE620CBFB10257D11DABFADD3
+:10DF80000EFFC4D4087FC0ABFC218DF4C344AF02A4
+:10DF9000AE74A67770A4D2F7DC98B7D55136311598
+:10DFA000F9F7D72E95F969C234C51B74F4975F63EE
+:10DFB000DE84F37A29D16FE2C559B5D42E98E3E215
+:10DFC000BE6FD94DB524FFA58E6BBD5FC2EF875CD8
+:10DFD00066D647C51ACE8B63178D79E391C9C8FF02
+:10DFE000EE694B0C3E4B7C7DD65F9384FD327756B9
+:10DFF000A12A753470DFB56B1B8D97BFDEC072E54B
+:10E0000049F2E859C48AEDA569383ED3A178C22403
+:10E010002AD33EA94DA371A7E221B4CDF48E3B557E
+:10E0200044E32354CF4CEA9FD54B9DD89ED1664EF6
+:10E03000BD84F366E7A4786CF8DE99F08FAE10FF2C
+:10E04000CECC49F224E81417049FAEA4BEC7EAA9B7
+:10E05000D6E91C8F9524D33ABAE23161BFFED6923D
+:10E06000FF457014FB52405168DCA5911FFBE4C7CB
+:10E070003F2975E2BCFAA10A90FC9C09E7FE91E0F9
+:10E080009FD99AA8272040F5166729BD576F519C44
+:10E090009BB8EF2BA1F9815166FD795CF7E49D7681
+:10E0A000B607E56FE5B35F74F2CEC16C17CADF9AAD
+:10E0B000564CED4993F0DBCBDF2A9FC3E326089350
+:10E0C0005229BFEB1FF8BD1D253F294DC7F54F0C49
+:10E0D00073B16E413A956A117A0DE78342EFDF55CD
+:10E0E000C1F35B94013F3A8FF3AFE4A7145A71FF79
+:10E0F00059E90951F3E70C7145F5E78D1858AA4520
+:10E10000D8B1F2FCACA8FEAD454AE98888F9BE69F1
+:10E110000951FD45A5AED21111F36F2B1F18D55F24
+:10E12000725B56547FA669B2D01F1BA1BC54C87D38
+:10E130007929FB9BD9AC870A9D62EE1B387E3F8E06
+:10E1400017B6097FAAD085FE14D2A5B4AD88FD808C
+:10E15000367C8FC68BEC528F05A0DD3D91EC80FCA8
+:10E1600009E22FF68B6577663BFA056389AE68B7DF
+:10E1700023E02F7544DBF1FA44E127CC017FAD0B9E
+:10E18000E939A7751EFB5765E9D54561207C46BF77
+:10E190001F0B372AD19D77131FB66AAC37E70C895E
+:10E1A000D9AFADD4C17E8CF4EFE6C8B78C7D21E049
+:10E1B0006D27FFC63887B1FFB5CE33479DC67EE1D8
+:10E1C000DF3AD7AC9C85A5A971E15FCFFE4C2C9CB2
+:10E1D00079A9324F81FE15FB85ADA9EC2FE24F7A6C
+:10E1E0003C3FC1F07FCA51CFB922F59C43495F58EB
+:10E1F000706D3D67AC7B2DFFCF58D7781FEA54DE9A
+:10E20000DF78BFF7B9AEC47FBE1BE727C5799EAEE6
+:10E21000C47FFE5CF4FC199A5EE340793E0E8A27C7
+:10E2200040783FA96BE49A959CF5D6525BF6A15FC6
+:10E2300023B770F6F9402DB5533B8327AD78FEB96F
+:10E2400039AA4EF907C32FEA1767A50A7FE4F855E4
+:10E25000DDAEE3787D40B753DC51FF886EA7F8AAA6
+:10E26000DE0B73288EF40E37ADA738C49B872DF6CE
+:10E27000EF4D15FA7E857CDF680FA9FE15047F85BA
+:10E28000ADE351F2492ABFE9B1105F1C277F2FBFD0
+:10E29000BFBF775C0B3A68BFE38F041DBE087D7E6D
+:10E2A000BDFEDE2262A60CE253C517A94F4A6C09D7
+:10E2B000BE48FD51E67445F5C793FF83EFCD760F59
+:10E2C0008C7A6FAE9E15350FFDD81CF2876A2C90A4
+:10E2D000A3913E35257AC8CF8BC5E3EFE5F93D0E16
+:10E2E00027B951604ED7557F1CFBE42911F88B7D6F
+:10E2F000BE3D55C47383C89EE33A2752756E6B5575
+:10E300009F70E6D07F267E88ED63ACBA8CD6C3952D
+:10E31000DDC4771EBBE90ABAE0F0D2E3F3E76A682E
+:10E32000FF3DE34DFF381CFBC71E5F21FA534DFB39
+:10E33000B2B1DFFAF87DA27FA369BCD983EC19B82A
+:10E340007F6E29F90BE9BE7F27FA759B1D5B15D4FB
+:10E35000039509A8D7B0D54C0A14A6F7C5C7DB2D7D
+:10E36000685F91C0C86C5E17D2C06E15F17465C24B
+:10E37000D020D913ADD8AB13DE2A130C7A77649270
+:10E380009D87DA0951719DDD82EFE1FB6536FF0B58
+:10E39000826FC2C93AEAA5870E960D20FE3891EA2F
+:10E3A000643CE4ED9BEA267D85F0ED21FBFEFF0158
+:10E3B000BEE678F0D59AC53E9DF57925648FF38643
+:10E3C0002179943EFA156A3A3F4F0821EFB0BFEE2B
+:10E3D0007553FEB1C665F190FF7E42F2EFF5B6359A
+:10E3E000328FA1DA051FA929A6F57BB17D5BF2CF9B
+:10E3F00019B92F6ABEA10B913FC0D933745181E87E
+:10E40000137FA86A610FF9E13DFF90E4A1F8F98359
+:10E4100044813F18D2F3D18FF1F97B77E779B6F1D8
+:10E420007381A765C1EC9A0EEC8FB3066FA0FCE375
+:10E43000A134FF4784873BADC191CC878EF549B4A9
+:10E440008FE2058E538CF80FE33CDD32BC7F5C70AD
+:10E45000EDFDC1467665E9648177637FC4B18DE8DF
+:10E46000F1DE24F1DC8007E1E8263E30E0EA8507B2
+:10E470008638398F0022FFD425E38B2E5A8FECA7E4
+:10E48000EA1079DC3F9838FF5245C28AFD7DE74D9E
+:10E490001C0F1A79E02210FB4D3EB54965E003F8E8
+:10E4A0003B51A2965E695CCBF1FD84762D26FEF68B
+:10E4B000B23D9D2ADFBFA9D55FE2A0F6FDE8795302
+:10E4C000651C3F09822AC559933B62C61BE77F46FC
+:10E4D000EB4FBD18FD3C294DDAC3413028324FB215
+:10E4E00041C64D974F66A7101F6B182BA8480F8B7E
+:10E4F000AEC2A4D43E3DD3B011E759499FDAB82D3E
+:10E5000038EBBC8FF669DC880C3F9AF4AA9B5B431E
+:10E51000EE0ACEC2BD3036621F2917061E2FBF2F4E
+:10E52000F038AE23E797D3B06F6E354350EFC3C3D7
+:10E5300014892F0CDF38FEBB7CD1C1F66B62DB6225
+:10E5400095E4D9EA36811E71BE043D11F4087D6C54
+:10E55000CF498DEAAB929EB509D17ECA78B94F9268
+:10E560006750D47A86BF62D0F350EAAC56F263C6E5
+:10E570003B56B1DF9232293B6AFDA293D1F82E04BB
+:10E580009F97E263CF87C071C0C4B35A947F32298A
+:10E59000BC83F963D287D1CFA79C8FEE97A6C9FC25
+:10E5A000562CDDAE854F18FBCB69E97F3F3E5DDE23
+:10E5B000687CA6CD89C667862F1A9F039645E36BB4
+:10E5C000A03F1A1F83578D891ABF617D61547FD880
+:10E5D0000FA744CDCF428319D91FBE755ED4FC91DD
+:10E5E0003B1645F5473F7567D4FCDCE08AA8F1BCD3
+:10E5F000DD6BFE2EFA17843644CD27349BBE87FE92
+:10E600003736FE4BD47EFF53F4AF8DA1FF56D2E7D1
+:10E6100013885EA8370BFBEC19B925A43F5D4D6F3D
+:10E620007C43799B40B1CEF9AAC03CF0D4E0D82F0E
+:10E63000549F427A6E30A2DA847AA3D604ABC81E05
+:10E640003C6A32711ED390F317D3843FF2629AC8AA
+:10E650007B19787B1AED22D94155EA4373FA8E244F
+:10E66000F253549309DAC9FE691ED61FE71C10BE87
+:10E6700019F7550701E7C54A92272D9888FCA8BECF
+:10E68000A972FCA90EF2838EF6A4E6E4CE53849F11
+:10E690002B0E9B4E7CABA6FA0364DFF09CA1E7A196
+:10E6A000BF9FF3DE465849F196D15FE65EBF99E61B
+:10E6B0002FBB7BE6488A7F7B9FDFADAC2C8DA043D0
+:10E6C000E43917C5F1AB0EA409FB67D813C37EDC90
+:10E6D00069D56B3AD03E8C53857D40BB71200DF1DE
+:10E6E000F181F28859F86901339D1FED2ADF27B8BF
+:10E6F000D021DF806D4A9FDDD2BF43E6FA203BDAAE
+:10E700006F7D9300A33844F7F03DE31D86FE5D95D1
+:10E71000CBF8BBEC889E7FF9FEE102AFF720F690C4
+:10E720000EE72CE23C06FC17A55EFE42EAE54ED25F
+:10E73000C711F9EB55BB7626917F7E2E47F8E3C6CD
+:10E74000F3DF493AFF2E4DE5F3AFDD9DB0FE7C04CB
+:10E75000DE2A42AEA87E55E3C0F591F9CDB5C639A3
+:10E76000FC8A46E75827E5A8A2B523F94E607FFE4C
+:10E77000C3345CB772D7957B0ED0FBA69E4C616705
+:10E7800003BCDFD2F780E382A57F8128BFB633CDFB
+:10E79000CC7075A689386109364EE4BB25E803B80C
+:10E7A000A87D63DA2CE23F7C1E56B0BFA015CCA436
+:10E7B000BF16FAB3CC84F433E079673F1EEDCF691E
+:10E7C0003AEF731BF8F87EFBDD7B2A92D80F34D624
+:10E7D00033D64181203FEF3D57C09C49799FE90ADC
+:10E7E000FB17B89F8D9EFBEE1EBC99ECB0B1DFBB52
+:10E7F000E0BFF40EF2C522F0F0BAC6FA40D73411E9
+:10E800007AF9034B2F1DED44BF0D6DA630E585361B
+:10E810009CB3F2BD4A7775CFCB0F239C1FAFF9662F
+:10E82000BF82707FB4BCE7BF0EE0F33B9E5241470E
+:10E83000BEF1D9FD5A7A44BC79EEFE2B2C6FE8AFBD
+:10E840003CFF2429A597AC1E92930FD6BC342A32E4
+:10E850005E484E9F99904EF73B93D2E2DE6FC4C65E
+:10E86000A56B883F597E75F64B0DBE5C2DF972C3C2
+:10E870000BA3F9F986A4DEF388FEF32AE7C1363448
+:10E880005B39AFF18EE487352F7E333132CF578F2E
+:10E890007CA95BA975724BF7A63AFA09FB4E5E1E7E
+:10E8A000CB71ABEACFA2731EBEFA6932F5F7BDF9A0
+:10E8B0002D9F076EBB3EF8BB11799178AE4AEA797D
+:10E8C00097F44AC501AB4EF9AC9203B927EEC27E6C
+:10E8D000652BEA1F3CCF2557C7B1A7291E3BA800CF
+:10E8E000E5B72AC309ACE42B1B9420E5C3D634EE6C
+:10E8F000DD3218FB6BEA161611BB56250B7D5659F7
+:10E90000AF0437B11F3E87E95C2865A3E450EEBF32
+:10E91000E5E378D771B1FE858DB0F63CC69D5DF517
+:10E920005F5E2038D6355A39CF7621296C198CFB99
+:10E930005EDAAB84027A9FDC76B9441CB62AF4987E
+:10E9400085F65DF5DCC211E436761D386D213DB9E2
+:10E95000AAE1B159F2799130FF41968BB5BB9595FB
+:10E960009179ACD5E80E42A4FD42F80213FBEA40CF
+:10E970004E49FA2C6B1A5E43E842BDB6FF6985F535
+:10E98000DA42E2970F0EEFF9DD6F68DF83FF3D9209
+:10E99000F15F747DF8075F80FD8B4AB90F5C3C63C3
+:10E9A000A1F8B2B2C17C21DEFD5263BAEF1EDACF0C
+:10E9B000888F63FDEE2D1610F73FD9107C9EEC82F8
+:10E9C000A3C7B21CE1F9579A80F068CE1ECB0AECBF
+:10E9D000DB48CEC85EB81DC17871F5BE748DF18478
+:10E9E000B1C4FA78F7A021395EA27758289F57E979
+:10E9F000EEB4105F57863F17F7FF8D9FCCF2C689A4
+:10EA0000B75F4E57A4333F274ADE37648C61B93075
+:10EA1000F7DAC3908DE5BE60450FD9A90D07913B8C
+:10EA200014A2B7BF87E00EEC4FD0E97C25073E9FCC
+:10EA3000D811B1CF1FA57CF4E6595EF964AC99F00A
+:10EA4000B9EF93B15A52DFF3AE4CC7AA78799997D0
+:10EA5000D385DDDE9CECBB182D07099E30EE5BD91B
+:10EA600064E77B1494832D2D45917270C7AA5DC411
+:10EA7000E74DAA0725022A1B17FAAB797E9287C8B1
+:10EA8000A336CE0C101FAA4E1FF327FC15F79B28A8
+:10EA9000EF8F50FFCD4DF73F4D72AC396065641E6E
+:10EAA000A4D2D4F1AB1685E8BAC36BA2FD0A81F5F6
+:10EAB00096EAF075703C5594A953DC7B74C22C2007
+:10EAC0003CFDBC59E1BCAF39D5BF358BE87B5CE57B
+:10EAD000F996A32F04E8BEBB6B1C14117CC6797F8A
+:10EAE0003E2E0C2AAEB3B9003CB4EDE6834BDDC438
+:10EAF000BF3FCF38C67E86DD1302D22B35E83F50AC
+:10EB0000DEC79E1F0AD33A0939BE2215F75993EE84
+:10EB100064BEB458FD1ECA273D20FB36CDB78AE03F
+:10EB2000B3A5278AF87BC8F5E5F9BA48FECD746F1E
+:10EB3000E9E77C4B9759F069D70DC07122D7FC4C9F
+:10EB4000A6212FE3CD063BB8AD6A54D646DAD744AA
+:10EB5000F0DBE879D7C1A51E82DF9C2DF93D33910A
+:10EB6000E52276FF8F889FA9CEC0B4626B16E1992B
+:10EB7000F0A6F79FF7A1E47B031FA0F973485E118D
+:10EB8000546FBCFC923FBDF82CD17573AA2FC7956A
+:10EB9000CFD7BCC2297627C6953B9CFF01C9B731A8
+:10EBA000BF95F089EF6FD1FC36C2EF51895FB3C5D5
+:10EBB000A73B59FE7D3AEDDF7BBE41F1CFF78D3C9F
+:10EBC000DF966CFFF79EEFCFF27CE654E4375A2FC6
+:10EBD00019789E39391820FEAB4D82A24DF8F8A85D
+:10EBE0006B969BE46ECB916F8692BCD72679DC4006
+:10EBF00079B1E69B9691DC6F197427F3FF172FE428
+:10EC000016AA11FB24A7177F45E73B2FCFB1C5E21A
+:10EC1000CFA1737C2CCF699C6B49BAEF2FE911F916
+:10EC20002618927E5DFCB3D7B8D794719E47DA61FF
+:10EC30008CF3388FD80D895C7FB657FAE11AF898B3
+:10EC40007FECE0D1D9BFF2C209AA2BA96931C13644
+:10EC50003A3E25B522EEFD925593110C7A6D18B20D
+:10EC6000D335348D3B9FD839AF16E13E080155F8B6
+:10EC700069D1F90CF02A5E25328FF1DA9AEBCB6379
+:10EC80003CE3AF21798DCD634C0E9B965B52AE2356
+:10EC90009FF1DABCB8F98CD119D171514186CEC03F
+:10ECA0008572047F86C28941913783F194BFEA2639
+:10ECB0005B85E39FE39959DE95AE1C9B0BEDE0135A
+:10ECC0004F6CDB3A0DE57084C003F56B88C9F5F134
+:10ECD000EC07F5E6475E1BC37E38EA3D95F3024E2E
+:10ECE000094B0C1D8BD07F1341A5272ABF123EF67E
+:10ECF0006D32F1DB9E54FD2DA24F4F9BCA75280942
+:10ED00005A87C51547EE0E907F8076E09F33843E8C
+:10ED1000B7358A7B4B9BEE653D99E0748E5323E4B7
+:10ED2000242F43D8A58A631F0CB5A02C5D329D4CBF
+:10ED3000CEC7F5D7EDAF4FA634DEDA736F4FA4D24E
+:10ED40009F3B35FF820C3CFF17CAAE5136F25BB7D2
+:10ED500006C7127E42E16CAECF2CD020A015F687FC
+:10ED6000A7EA293C14BA04954FA5715BD0347E25DF
+:10ED7000F15F55589C97F630A38ACC6D54B8DFD517
+:10ED800058934AEB55FDB67910E9AF9732849FF35B
+:10ED9000E2D53CF1BE061ACDBF3FC325992A68A231
+:10EDA0007CE34B324FD97555E579C6FE058D335559
+:10EDB00027F2417E78C711CE8B365975A26FC27388
+:10EDC00020F0D194C07E68D5E1D94076AFDB051E36
+:10EDD00005C7F724F67C44FCD0D36CD5E93E37C197
+:10EDE000B9035271FD3DB21E2C1719B6DED1F7DC06
+:10EDF000D82FA1E997944324BEE07BE5046D074C2E
+:10EE00007744E23B49D859C9577B12C326BA67E910
+:10EE100041DFEF5986AB0F4EE07D0D3873D90EEC14
+:10EE2000B1F45CF8713AC3E5243EC8050127348D7E
+:10EE3000D649AF2638BD7C8E04A7EE0928FDE1AA8D
+:10EE40001A8B8E20CACFA3A4CCA6F4C97755625FD3
+:10EE5000DF86B2B0271BA4FCB76E2B9D16D9478561
+:10EE600033A9EFFDFF78E2F8B6DA219CFF0BA84842
+:10EE70007F3BB649A9744E21572812DE8C42810788
+:10EE8000AA0BB4DBC478EF7CE473472ADB7F9EE7F0
+:10EE9000B13AEDF3B2585EF87ED1F00F1F52C217AF
+:10EEA0006E46D2763EE64BC9C773759A8E3C5C8738
+:10EEB000F3FEB83C342A8CFD16ABFF79E2CF573F06
+:10EEC0005CB1BD80F4EF1EB3A79CF44F47E071F630
+:10EED000CB5F34EBDB22E40E86F46472DD61CC3E62
+:10EEE00055E7363D4EFE76F74145A7FBF46E73CFEE
+:10EEF0005082BBB2E9330BD563561DFC84FDEBB2E7
+:10EF00004CFF5EDA6F526335D7CF4D861D5C3F876D
+:10EF10007A91EB20436EA14F2E9F1DF56C75041D59
+:10EF2000DE93F2063DFE6164BF9AA4BC1EA6381CA7
+:10EF3000DBFD2D770CA7F5F7CBFC80F15E351C19B6
+:10EF40004C78DF04AF716B3CEF0E6A5CBF9CF7AE90
+:10EF5000ED5E6FC4FCD352FE4FCBFD5667FADF2047
+:10EF600078D7B67C6AA1D2C2AAF3A1A114F78634DD
+:10EF70003DC519478FF4CA6F8C3C55693D169A5FA1
+:10EF8000751158AF20BD6B53907E2FBDDB386639AD
+:10EF90003EDF8F3449213B8BF12AD9E3FD66DF60E8
+:10EFA0009A5FFDCED763498F1D2420F07F5F37AF76
+:10EFB0001D467843FE2F4E2439DB0BACD70C39CDE0
+:10EFC0002739C5F7F389FF8BA89FCB7A798FA57D69
+:10EFD0001ECBE57E13905C22FFB33C20FF3BC9DFD4
+:10EFE000CB77A23CF0FBA359CEF7B49BBCEC37A384
+:10EFF0005E1FC9FDE2C5D4DFD35EEA6439A73A8457
+:10F000004292D7F0115E270440D7F2450AF822FD5C
+:10F01000FFBC8C64712F24F1393943D883508E9E04
+:10F02000E2C173D855354A3E22ECA5E84B7B5A9A8B
+:10F03000F9976DBF98465226ED8453DA49FF78D68A
+:10F04000FBFF286DD586D7A72CA8C3736E38A5F211
+:10F05000F86119F785259F1C91F91AB21B7A9AA8B5
+:10F060001FA6E713B04FF5E513BDEB4BC81C4D9A37
+:10F07000B3E328B5537CA11272DBA62D6B3F6A1651
+:10F08000629E47FCD770646E1ED5E3759FB3420243
+:10F0900082D8F06DCF472F221E1E3E8CF88F63A7BB
+:10F0A000F038CC7FE87F0D0677FFF16E45EA91409E
+:10F0B000D27CE2C7AE06B5AF8F8054226353DFFD2A
+:10F0C000A47D7B006DE77F677A0767223ECF0CF057
+:10F0D00073DB7DFADB4C12CBFD67455CDF60F1E64C
+:10F0E00011FF346463A81B874FAD9922EF536485E9
+:10F0F000B8F79C37670A39181580ED0AC7EBAA33B1
+:10F100008874BFD4A07A2DE82F5D84C092A9A46F23
+:10F11000645EF701903F5EFC45FA3C28BB0F90DF30
+:10F120008276EBC15FC4D61178D96F31F25800EB0B
+:10F130004DC45F2B9B14F80FC4C5AA67A2E7AF9319
+:10F1400075F2AB1B771D1B8C745DF35CCC38F92D0D
+:10F150007CFF11E278785D5D743DC3CD99D27F1953
+:10F160000EC3C97F41BE623D61D6A0D58A7CAC602A
+:10F17000144322F69249E00BF52BCB67BE616F8AF0
+:10F18000855EEAB9045CA794BB3B7494EA81A6D47B
+:10F190006579688F299A189FD29825EEA7B4A04A5E
+:10F1A000750C93BCFE59EC7707BC67A9DE6495D457
+:10F1B00097E0C45FCAFBC8D3AF92FEDDEA606C9DE6
+:10F1C000A8C053959C37198235B4EFCADDA2DE6919
+:10F1D000EDEEE8F955124FEB9E3A7D8CD28515A1E4
+:10F1E000987189A7AAC6983A16B138DC9F29EFAD65
+:10F1F000647DFBF5D65BFCD12CFC8DB7E53AC6F8F7
+:10F20000E64C91EFADC463107DD705D520F1D12A2E
+:10F2100025902CFC5E702CC7F3DD67B081ACCFBDB0
+:10F220005FE2E93EC93F7C7E7CBFE219F17DC5FD0E
+:10F230003F8B867F0DF82C83F1F9830D3FB050DEB4
+:10F240003196DF56D599D9FF5D23F113CB5F6B7AE9
+:10F25000F9678785EC5B2C7F55FA956BC02FFCF620
+:10F26000FF5BF80D3AAF91CBAC3587393FB5F60966
+:10F27000C543F9AB6B9DABF73CF27C7FEFB99E3594
+:10F28000E83D06C630BDE7A45D17BD63FDEDBD9644
+:10F29000DEBC26E7052FB766733EDDE0ABD87566AA
+:10F2A00049BF7DF653C27FBDD4586227FFA3FBA49C
+:10F2B000C9A3E89CAF4C2EC0F38F6F5681FC91EE32
+:10F2C000A6E13B03087FE1A9A2C5945F1F7F0AED79
+:10F2D00013DD07B716FD5702DF077BD248EE67B68E
+:10F2E0008D48FBBD83D761FBDE7DB2706739E9E9EC
+:10F2F00093A545B4AE82E3549F5E28ED54F5C94210
+:10F300007B4784BDFA4DA6C8CF6F71FFFE518A1BA3
+:10F3100066EF357B283F32DBECDF9480F015BEA032
+:10F3200078AA71B763ED479EA47551BE28CD8AF3C4
+:10F33000FEE9088D57ED5118FEEEA6B2BC3D643FC4
+:10F3400083AA87EC6277D37DF90F921FD4FC40FE2D
+:10F350007D11FB1D4B15FA66F60D66B6D79D83EC45
+:10F36000BF2EA7BCA87717EB8DCE43FB2CFC7DC32B
+:10F370001E05DC78CE63EEA32F131E3A0F9CB65009
+:10F380001050D270DAD211477F1BED250CF3C29CCE
+:10F39000AFDD61E1FACDFD7FB0D0792B9FFB84F327
+:10F3A0006F6B287E203FEF1995BF773ADAFCAA856C
+:10F3B000F8B4B24E81015991E3661E27FD4AFDCF94
+:10F3C000EA849E36F87F85E47783FF0D795821F52E
+:10F3D000DA7D5BE3F3BBA1FF1E04EF9641B8DE03C9
+:10F3E00075CBB90EE9811DD1F35752FC7A23CD17A5
+:10F3F000FCBEF2A9E8F1D5BD7C1E60FD1FAB47BF86
+:10F4000033F47F2EE4129F5F0EAF18A6A13C7D7DE2
+:10F410007ACD308893AF3C29FD06C36E5F0E9BD832
+:10F42000EEC5CEEB6ABC62217B5BD5FA27F673672B
+:10F43000357DC9F4286F6AE17AD95BC0BF8EF07957
+:10F440004B93DD49FE767987D003F39AACC1A04295
+:10F45000E3A15AA273F761F1BD49E090C2FE1648DC
+:10F46000BDB852E275A5C4E34A8CE306537D8C8C8B
+:10F47000E32B65BCBE3A67D7312A29A994E3EBDABE
+:10F480008E26131EE781D05BF342426F19F431ECF4
+:10F4900050ACBE400B770FD1776D9395EBD6E74B11
+:10F4A000BD35BF0EF596D25F7F740FB48BFCF17E35
+:10F4B0000177ACDDAD6C889EEF1A20FCD8CBD27FF3
+:10F4C0002E1C104D97F21EB0537E7F9EAE7A82FCAA
+:10F4D00056BB46FBB78E457EC3F55BF5E129F1EAE5
+:10F4E000B58CF64D191718FD059467C3F921E70E81
+:10F4F0004764DCFF9F03847FB366B21A20BA46C418
+:10F50000490B0AB3E2C6497309F43786DCF7B371D5
+:10F5100091719277D728E2B77F75EF2CA7BAA6AA88
+:10F520003AA12FBA26E1BA29E4F703FBD15575D6E3
+:10F5300020C53355C82FFC7D1AF109C96393524683
+:10F540007C8271C6EDB4FE42BAEAC4F32F6C44FB70
+:10F550008ECB2F2CFD92F9AB6D843837E26D40BC19
+:10F56000B8C388372AAF0ABFD6785EA97570DC5158
+:10F57000D924EAB51B8E7C33340BE1ED6EFEF3D05B
+:10F58000E5544F3E40D8E786E2D0A75457F4F51E25
+:10F590005B5CFFB557FF2BB52C0F95E68E4CF66BD9
+:10F5A0000EA21F7913EAD1B7BFE038A5E148C2BD6A
+:10F5B00094CFEB5AE11FE6FC1E3A55C326F683377B
+:10F5C000412DB7E41F45FA8D2B9DA24EE941693FBD
+:10F5D000A9FF08F2F583387746617FF937F449854A
+:10F5E000E4EBD510D83255E9AF072AA4DCACCDDF67
+:10F5F000B585AEF663FDA70A294F1831B0BD8CF56D
+:10F600009FFE33865FABDF4E64FFB8BB4D7552AED5
+:10F6100019F1FBAB41E427625C901D275FFB85E499
+:10F62000CF4E797F5C3D4965FC99268BD6F0B710AB
+:10F630008FCC37DDA71D41B26F79875FCD263E584D
+:10F64000BB3BFADE89E8E8E7BAB1A0C84785EC7CA5
+:10F6500017658CBF74F8D531C46FD56F7F3B4AD026
+:10F66000E79B5196F46BC367B48A22E2669322E269
+:10F67000E6FD5A4732C56B5507555F643DBF41EF04
+:10F6800097A53C8126F203F50374E6ABEA26C11F79
+:10F69000A666D1E2FE4B447EC8CCFBF71B2F46BECC
+:10F6A000F91E7B060417F24095B987F9AFEAB489D1
+:10F6B000E1A93A7D397344C47B015A7700E9BFEA76
+:10F6C00075C0FAC40EA46FE7D3F791D89FFF7E02EE
+:10F6D000FB61C7B2B7978BFB2F15487F3DFCF69AAD
+:10F6E000D191F660E200712F0E840737793FBF1089
+:10F6F000FB4B3C6C824532BF20F879AF8C9B302E9F
+:10F700007B73409CB8EC7AFDE9EA662B50FEB9EABF
+:10F71000032BD7197DDDBC92E37EB8EA1F4DFA06B4
+:10F72000FCFE1BA97DF8F0CAD1F4FCEBC3AB6FE47F
+:10F730007CA9B2292ACF1120F8DCE45F7DF5EE5DCB
+:10F74000E47FB669EC9F14B69D7D97EE69F7359816
+:10F75000F9DBD18AFD13760692C8AF2A9C4FDF11E0
+:10F76000ED6BD598FFD0DF32FC2B3BFB57A78AD837
+:10F77000BFC2757C416E8B4E94D3BAA78A8B689AB0
+:10F7800082E3A4D7C6937FE5E8F3B70C783E93F8FD
+:10F79000EC6E49E0BC8B02D982CF604414DCEB1ADA
+:10F7A0005E67FF645DA31AF5FD88F1DE5F06887B66
+:10F7B00087EF0C3E0B295EE6A3BDA25DD7B82F9361
+:10F7C000CEB1D61C623EA9AE338BF13DA205BA077D
+:10F7D0009AC01F4107083F27E811D2659E2538844B
+:10F7E000FCFABDBDF78AB22E2428EAF56A5A87F3DF
+:10F7F000774C975BF7A5C7B34327E99E071DBEE388
+:10F8000059221E8A1DFFAD5BE4418E9F13FAF1F869
+:10F810004CFFE8787A3200C5225FA048FA3588EFBD
+:10F82000ED63E735D37A78FEDD4302C7898F3BF776
+:10F8300026F0FD63A74BE4754BEADB34FA1E666DD8
+:10F84000833281ECD2DA9CF7F87B19EC17919E5C3D
+:10F850001B3EC8F7AF15757B6779E3C0B1DD2DECB2
+:10F86000C33CF99D72ECF87C397E063C19329EDB74
+:10F870004EF73E67CACD4EF1DD9BF8EEF556A9D79F
+:10F8800017DF62663FEA0CE866717F22EE391648A0
+:10F89000BD7DABD4F7B1DF631BFAFD76B9CEC2678D
+:10F8A0006033DD73C47E9F7DBBF40F178197D7EF64
+:10F8B000F75DBDF41363FFFE42895BEAF551308AC0
+:10F8C000F47A08ED0DD75BE426B0DD9E5F3032AEF2
+:10F8D000DF41DFA9EBF23B756A0DFA57E7BEC7F6C9
+:10F8E000F078CBB997F9FB867309901DE79EADCFF1
+:10F8F0001E1A7AE436417779EF51E114301AF4BFD9
+:10F9000084115A647ECDA0FF83920EFFC7754539DE
+:10F91000A045E6630EA9FE07DD195447DDC9FE3890
+:10F920009E80ED219E6BA83CD7506B849DBB3470AC
+:10F93000795C3EEE3B5F6A40D893746E5B72ADECCF
+:10F9400037568414FEEEB0220CA27F9BC2F9CA5136
+:10F950000D2D5CBFB1A454F178855A3C4BF0197C55
+:10F96000B4C026FC03835F7AF125F988C6C95FB865
+:10F9700055FA0BB1FC341ADA67D1FA4BBD8A87EA23
+:10F9800036AFC947CBC6BD4EE1EEB5F808F9D24C4B
+:10F990007A31969F5E73FB1F25FC75B75F5E5280C0
+:10F9A000EB1FCFFD6C28F14FE535E4E84549BFDD9D
+:10F9B0008EC071AE63A9977504F5B98D1D849756F5
+:10F9C00060BFB2D3D5BE6583F0B7B98EA0229CC00C
+:10F9D000F5A5154D76FE6EADA2A13A710CE9E326B0
+:10F9E000D563C77E79C3E952CA239417893A972A07
+:10F9F000BBA8BBABB28BBABBB9E9FEE7DC13F8EF2F
+:10FA00000344D711583A7EB5E17BF83E56DF359373
+:10FA10000F37E17F4E0F354BFC6C68BB923986C4C3
+:10FA200034DD7F88E0EE7EFD450B7D8A5135E6D5DD
+:10FA3000595482D6ECD679DE2D752DB5945636E024
+:10FA4000B7BB9D42EF9A8343D86FCDBFBE7A9BEA86
+:10FA5000836F8C25FBD5D5D236D612C1EF9D1B50B6
+:10FA60006FC7A1633598A41C6BDC2ACA22E9470939
+:10FA7000B9AE6A3E9A49F98B4E92E77C6ADF491E1D
+:10FA8000816DC5DE33C923C99FD92F5A63BD4B4D44
+:10FA90002ACF03AD63D4ED4991F06D66F82E85C48D
+:10FAA0003A001DA31617448ED7FCBFD60717853E14
+:10FAB000E888D207069E4216E0EF880387AD5CA770
+:10FAC00040F73FAE083A6A0305FD6EC2608AE476ED
+:10FAD00032DD7B0F27974F83BBA9AF41584BA5FB66
+:10FAE000E9B02AEAFB86B0BE9F28F7BF490BB750A2
+:10FAF0003DF064795F3A05DA79DE0CE8E1D60B4E29
+:10FB0000FE0EBA183CDC4EB285E7535A2B3F14E286
+:10FB1000EF7BC2999AEB824D7E6F1D87DE7D78D395
+:10FB2000E082810F95EED5443D53EC796E1828FCA8
+:10FB3000BC9BBC420F914B41F5C09320C4F7F9D355
+:10FB4000A143DEEBC73FC7548C0BE91E6F3ABA31B5
+:10FB5000898C8F20CF9F46E751E39DA7633E931981
+:10FB60004A9D049F12CE347D67BFFE7374533528BF
+:10FB7000E5BDEFEBE9FA7151DF3DA8A7E98DF7A9E3
+:10FB80007E59F17AB9BED943DF8D53FC13D63A7B47
+:10FB9000F55936C098812B72064EE8FB6E04FCC006
+:10FBA0007524B1DF8D447C27021723FE2E9251E786
+:10FBB000BB3BB848A73A9165E936FE7B3B85B6A1C9
+:10FBC000E329AF7928CD9F333083EA7DEB46F2629B
+:10FBD0005A7002FBB992BFECE09D447850BCC6F766
+:10FBE0002BC07CD3FBF70B3281BF27B25BC5773EBE
+:10FBF000DB911F6DA92C053AD55FC323253AF9D3B4
+:10FC00005B5C360F7D476C25B8ED7D70D7D8441D01
+:10FC1000488D4DD47918F572B178ADB119794E8F00
+:10FC20008DFDF198EF907E62F3DF42787A28A998F3
+:10FC3000FF0E53DE2BD3DC5C0F25BF7FAA4930F0CB
+:10FC4000506CE3E77DF594EC67D6523D37C259938B
+:10FC5000015CFF783469540AD565D5B4897AEE9A87
+:10FC60008C00EB77B35F617D5FD35AD24AF6E2B284
+:10FC7000C3C275DD352E51071FC880D0F37A343DDD
+:10FC8000A619F4A0FB4B598F64D0655C3A94D07BE5
+:10FC9000E3C2DE91849342DBCB37D0FDC2B87074EF
+:10FCA0007D19D26935D1A9F73B1ECDC9F51E067D58
+:10FCB000907198D99D92EE06BD9CC6DF23F06A51E3
+:10FCC0007F8FC0A0E3F644412F3355E00CE77775F2
+:10FCD0005A37964EFF1BE114C1BAB04B000000002A
+:10FCE00000000000000000001F8B08000000000062
+:10FCF00000FFCB936560F8518FC0F9D20C0CDEBCCD
+:10FD0000A862B4C40C5C0C0C41405C0EC41A407B6D
+:10FD10006F01E9DB401CCECDC01001C4FB81F81F90
+:10FD200010FF07620D20D604E25F407945A81B5BF7
+:10FD3000981818DA80B80388BB805887918141975A
+:10FD40009178FB93841918DE8923F87A120C0CCD74
+:10FD500052F4F3FF60C33156F4B5EF29D03E4E178D
+:10FD6000043FC71998245C50D570BBE03783074D1A
+:10FD70009E178DCF87477F9E212ABF5C0B953F4DF5
+:10FD80008781E123929A0A2DFC6E41C78A460C0CAA
+:10FD90004A46C4ABDF608CCA0F3081D000F9ADB1E8
+:10FDA00009A803000000000000000000000000009F
+:10FDB0001F8B08000000000000FFE57D097C54D582
+:10FDC000F5F07DF3969949662693900D0871028AA5
+:10FDD000A88013086940B4C322A2228E5BC50D26F9
+:10FDE00002D93710FDF0AFFD3210362DD6D0824645
+:10FDF0008B74C0A0C182040D1824E0002EF82FD50A
+:10FE0000D8BF7B5B0C4AC31692801B7EB5E57FCEC4
+:10FE1000B9F725EF4D26806DBF5FFBFDBF69F1E6A9
+:10FE2000BC7BDF5DCE76CF3DF7DCFB14DB2896F89C
+:10FE300063C6CEE00FD2AB2C8CB151DDE96CDBA0F8
+:10FE4000A187FA74E7FF5965D3EA87421EABD06EEB
+:10FE50001ED6FD9CB185547E408C6B38BB1CD3F400
+:10FE6000101B0E8F6DC91696CCD87D6E46BF01094A
+:10FE7000BE742991B1CE1556F7BA0C78AE7A5C08EB
+:10FE8000DFF7C8207750C2F73CC95216E43FA2BA48
+:10FE9000D701CCBE3F23B36CC666DAE06F0FFCC35C
+:10FEA0007AA0BE7CAC6C1063EA699905A07FEA7702
+:10FEB00012A5033436C3EF0078F92D6CDCD0EEFECA
+:10FEC000B913FDEC7380B7E8F9897E5BC0907F09B8
+:10FED00093A8FFECFB4AAA5F6F6FF1F25B6C3E07E1
+:10FEE0003616948DCF3B967FE9C2E78B9B6EA17A45
+:10FEF00018532CD8CF72B7C84FFC5C6396EEFABB90
+:10FF0000F114A27674D8D304EDFE8831E9B5BFB6FA
+:10FF100032C043D556D56305BC4CD8AA867F0C7039
+:10FF2000E95A2984B065979D31C04BFB6A0E879DC5
+:10FF30009A0FCB9FA80518AA28B736FFFC0AC4DB86
+:10FF40005699ADA366FC84F7561BC73B6BE4709EC5
+:10FF50009D83A56B774FC7F70B1AADCC0EF5956E49
+:10FF6000CF9F7A05C0F9FB5486454AD72FD0FA01B6
+:10FF70005C1892EA11EE18CFA8FDE03639B41ECA1B
+:10FF800077B89A936F83F11FABB431CFC5D06F6749
+:10FF900073F2AD8087A2D09649F85ED146C98B2C0A
+:10FFA0003461EBFA37FBC27BA51B24AF15F0525C22
+:10FFB00017CB3C43781FCEC0BFD60639FC63C89F21
+:10FFC0000BE3641948D7EA494CC6F657681E6737F1
+:10FFD0009E8E550E611E6B375CBA01DA81F7CA5EE0
+:10FFE00094BC38C4320B0B205FB66FB74F7BD68101
+:10FFF000E35BA00D76E2B8966A582E3F94BBCDEE37
+:020000022000DC
+:10000000C1FEADD526417ED1EAB55A9E81FEC575A9
+:1000100097318FCDD0AF9A412946FE884C8F019BF6
+:1000200018FB53C498AF1EF94409693719E4A29F1D
+:10003000144FF42EAE934DF50326194B82FF7E002C
+:100040007F02BE823B9D84579D6E73051FE9743B02
+:1000500025E487299DD9C6FAF5F4E74807E84F75E6
+:10006000A59BD25F54A652BAB2D243F47902F107EB
+:10007000E972D16FD758364E81765D3EE646314BF8
+:1000800098E21BA7029CE0E770F2DD01C97396F1CC
+:10009000EBE9136A20176572159BE453FA02AC056D
+:1000A000E6302FB4AFDCE89B389AB1D759E0711C29
+:1000B000FF222950807465AC3ED50F745922811EF1
+:1000C000017C2DC541021E96F4057E063A3D714F16
+:1000D000F6B3B224C69A8870DE738F66503D3554ED
+:1000E0008F0AF50C3A773DC9D3734CF5244F2FD0C6
+:1000F000EB594BF5D8CFAF9E27A68F31F7677A9192
+:100100005ECF0B586E91F3FCC6953C63ACB93F33A0
+:100110004AA89E94BBBD2C00E5659D7F58B34F86D1
+:100120007CC7C6F8118F32231F8DDF86F53941AAAF
+:100130008C7C1497136392A7785F8209EE33B99F82
+:10014000A97C927FA0293F65DAA5117CE970B75E92
+:100150002660E854385EA3FE6AFD34D23BE3FAD948
+:10016000087EA09F83F4CE03630217BBA1DFD8579C
+:1001700006F47F400B5CEE8EC237302E89A562EA12
+:10018000B1601A99BF54E5781BDFFFFBC107E1FDA1
+:10019000724BE7E07880FF4B1AF7218EFB8FA84C5B
+:1001A000816E3132ABC072315646FA6F6946F6B392
+:1001B00041035E970D007E91BAEB5DA60652911F3A
+:1001C0005B821541E4CF253041B07E8C1D6415E182
+:1001D000E085F0FE80BC54C4BF5503FD616C5F83B5
+:1001E000F68752FBADD87E5B2FED5B07E698DAB75A
+:1001F000A51798DAB769D03EC8476770BE681FF088
+:100200003786B1936C3EB56F4D2FA0F6976AACC0A0
+:10021000D47E4C57FBDF60BBDF63FB4951C63F70A8
+:100220008C79FCE945E6F16B7CFC6C4150B41F43D2
+:10023000E397A4201F7F7A111FBF95D7DBD5BEABF4
+:100240000BFF9A04ED3AA45EC63F68AC79FC1794A4
+:1002500098C76FE5EDBB172C13ED3BA8FD78691926
+:100260001FFF0525D4BE660D78918FB4FE31152190
+:100270009C4FD34080524807FA281D92C018E8933B
+:10028000DFB2818487076238DF7D1303FCE6E8D69E
+:10029000A72C041208F37099E0E9E28DE3343E3FA5
+:1002A00007695E9F2DBA3AAB51A6F98CADB4862E84
+:1002B00082FEB637CA418467ADBC3224D37C0A764D
+:1002C00002BEA7B0303EFFF3AA61EB8CE38A4C6715
+:1002D00057ABAD2D06B9EAD2EFE3D9900AE85F0536
+:1002E00032C1A86EB815F434033DFC39E8634C0FF5
+:1002F000ABDC2E39047A9C5D6C949B05DC2E09B234
+:10030000F78740FF7F22FADFAA707CB7CE9342883E
+:10031000FF6F56CCD1509FCDAE8E05A477F7A35C6E
+:10032000D0A973BB3544F6144C07889FDB491419D8
+:10033000FBD3AE1BDE945C303FD6F431BD77370B78
+:100340002D4E85F23397E70E70C3F8EF9A661D21A4
+:10035000E3FCC47CFD2D24C7ACBF2587B1690D2B00
+:10036000D4FE00DC3E4DFDBCC5F0FE1D01337C57C4
+:1003700081196E5743AA05ED994289AD857AEFA997
+:1003800030E7EBED4C9612385D457B3F011CF48560
+:1003900047F7603A021FBB89AED3DDFC5DBD3FE588
+:1003A0000FA92C4CF3714B1223FA2751B9809B8F64
+:1003B0003BB2BFD3559BCF0FFD99FEA04CF88CEC00
+:1003C0007FCBAE589F05ECD9969A2F5564C1C8F1E2
+:1003D00044F67FC6FCC8F1B8359C1F728391CF39B3
+:1003E0009F44F25379E3B85F1E32F05369FDB5BF05
+:1003F0003C6478AFB8EE26135C18BAC3543EBF26EF
+:10040000D7943FBBBAD0943F73D91C139C1B7CD0AC
+:10041000547EC6FC05A6FC7B2A1E31E5DF55B0C222
+:1004200004DF1178CA54FEF6696B4DF9965D97DCCE
+:10043000887254F581CC70DEF8DAD1FA73B437BF24
+:1004400076285EA4C711B057500E8E81BD82697B9D
+:10045000E348B2AB410FE63130A1564BFB83CBC62C
+:10046000A25E66A43F43D2EF83C134C69E973C840C
+:100470003FB94663616061892574F171A76CC86FEB
+:1004800039477E0D08FAC89EF9724BF4E7E5EB7226
+:100490002F40BDD39B3E805F7F9CE73A843D1099FF
+:1004A0005F2231BFF1B9BE7EBA5CE27ABE44AC5382
+:1004B0004A5EEA3B9EB9100E0FAE385B7BF5805466
+:1004C000D49368FD27213F801418E8515C37C82475
+:1004D000DF6DBB65EA5719EA04D0AB99CCBF574230
+:1004E0003D13DE9B7ECB30EC87EF75D4FBAC3189BE
+:1004F000E6F5B6CAC9BF3CA4227DFC941EA99C4661
+:10050000696B6580D2439505947E5E5941694BE5E0
+:100510007C4A0F540629FD63E5324A3FADACA6F490
+:10052000E3CA1A4A3FAC0C51DA5EE9A35497872E0E
+:10053000FDEB17F6B058B7C0036E0F8BB12C82B22B
+:10054000CD24E7DE5494F3538E6F06A3BD7FEA6398
+:1005500060A28CDEF115C96FBDD3D147F64A5E08A3
+:1005600098A74FCF7C7B0CA793DDC22633D0478F53
+:100570005CF49CF7DEA1042BC832C0A9DE9B9C5121
+:10058000EA85B90FE9752E3A315FE7705C67B73ECF
+:10059000FD976CACF77269209F87F7CA340FB3F0F0
+:1005A000B35EA4D70FC59BF4DA9FD25BA0DC892E83
+:1005B000FC35A73348E7486EAAFF5483952988C7BE
+:1005C000A6D8102E8D4FED7BD685F2383755AE3E2E
+:1005D00034B2777C95D667543B0CE3296F34C3A7BC
+:1005E000AAA5C9DC7FE089BB7518F295BBFAD04596
+:1005F00048FF544AF57AE6A66AD4CEB1BA41717C76
+:10060000FE0EF17970633CF12BAC3BA9FC3FBB3F84
+:10061000BDD5A3F787B106F6850DF501E40D3AF7D0
+:10062000FAA807DD95AF343FD2AB49FD06ED85183A
+:10063000F8776620D6AB10ACD75B5E2F07AD97E39B
+:10064000F38DA6F6E03D8FBEA6C7F77AE75B85B5CA
+:10065000EAE3047D75A5F0E714D7D9ABCDF34ABC26
+:10066000092E6FEC5B6D9A67F00F907F562129C8B9
+:100670003F25829B3A14C73209FA976AF150BDE5CB
+:10068000122F576A6BD1021E62C766B433EECDD10A
+:10069000F9CF73FB1F40DF1FFDADCA1EC57CE1D73C
+:1006A00051F56CB06F2DE8E711D0BD0DC55350EF7B
+:1006B0001DDD763DD927B398DF858BA402569D8D2D
+:1006C00076CE0966998CFC7F82FDDE35D2B0DEC81D
+:1006D000B768D49F99CBCCF32CD8672638BFC60C0B
+:1006E000E7B19B9391DFF356AA30B7A05C9AF36F02
+:1006F000B7B849BEF259C5125AEF083FD8BD6EA629
+:10070000F407B92F7DE599ECDCA1E887E0FA5BF707
+:100710000F1426703BA52831A4F920FF8B86913F4A
+:10072000B982E1FBA125A8A7824EE65DCF7AD2EF80
+:1007300087F63FB2BFFA7CD2C34F21FA21D749BE18
+:10074000509475DAC31649D85B414A978B71EB76A2
+:100750006B4D045C1B01D747C07F37BF253213BFE9
+:10076000A55A02359624CE5F682F484AA716F84747
+:10077000EA4FED517FED3FB5FE34A83FDB547FFDDE
+:100780003FB5FE0B7BF4BF295AFDA5AF6CDA16040A
+:100790007D53B479958BC13C7454A94EF602DD4B60
+:1007A000D62F76211F1C51822EE4E7A321797234C3
+:1007B0007EF8D222FCA2CCE790705D857F42FDC717
+:1007C0005EF8D954B4E7BE59AFBA69BD54670D5B42
+:1007D000414ECB1A0AA7A0DF17E0831C5E7A52466F
+:1007E000B8D1CC9F45CFAF4A46FF1E708A584F8480
+:1007F000C95E2AABFDF3249C87CA5927C959E47BFB
+:10080000D8FEE904D28FB95A5CCF7CE827D9F9E544
+:10081000022FE50D3F3B29BB30BDF630EA13B04C4B
+:10082000C80E8F7CAF40D841872CCEC4565842B1F9
+:100830001FB11FA1DED4F1C242DC0EAADAF0E4F04F
+:1008400083D0AFB6DADFBA2403BE74793B553FF3E9
+:10085000D7AF7A7AD7CBED62BDD7FD5E88DEF334B1
+:100860000AFBAD89A7256AD885F671C95AD51B84BC
+:10087000C7259B9E7DEE695CAF7E62F55E04F51731
+:100880006F7AE3C33100176F5113A7F06138A4E406
+:100890006EFA94C3BFF923BAE951F4F21B9A6718B0
+:1008A0007FFE7042375D8AB7ECD6D8B09EF898507C
+:1008B000BF5B6B7144A14FFDC1496867556DF85628
+:1008C000C375E5D15D124BC98882CFB56F90BD80ED
+:1008D00078227A0A7A75D12FA27C39D005F57A244C
+:1008E000BD22CBBD81FA6514AF17FD93C0DF2FBECB
+:1008F0008A7EEC4FAD5EC443C18BF7B9703C8795DF
+:100900000ACEE7CF2C4E463F7D811A4C7653CA9FC4
+:1009100017ACB99FF82FFFBDFB93F9FAD0D7D74298
+:100920007355B02F8E73F6EADB689C792C407C58A7
+:10093000F08CEC0F41FAB5C2266F892227C5329799
+:1009400093C3EB80B830CEC3B84E41BFEEEFE5D0D5
+:100950007AF28FCC61A80FEED7FDF16C2EC15F8BC0
+:10096000FD8471B2455FE7DA4CFC5BBBB419E974F6
+:100970006C802F05FD6AE54C090A7C4867A05EF98A
+:10098000BDAB53389D9847C916EF815D30019F6319
+:10099000F966D5671F6E7A8F9DC9E86E7F9E681FC6
+:1009A000FA1D83F3F9E16456501F657C35B2AE073A
+:1009B000605E37F09941DEB9FCD73EC2E55D97FF36
+:1009C000D04D9331FFABF7B91CE17B385F42BFC21A
+:1009D0002994BFFB5689F4839585A3C979AD2AE490
+:1009E000DC9C1FC92FD07F458A33F00DB69340742D
+:1009F00020BF5ADE4A78DFA857B15D57CF7A7539E4
+:100A0000CE17FA204F067D7059B73E60ABB91EE88D
+:100A1000DDEE0AF2F59B1A7AEE69945F90D7A00793
+:100A2000E557F5E3F88F6FDCFBE19D20B7C7EB7569
+:100A3000B935EBD548B92D7869BD847C1A29B7C77B
+:100A40000BC04A8926B7F03CAADC16B4FC4BF4AACA
+:100A50008EC7C765B35ED5F5646FF88CD49397CA1B
+:100A60009EA87A127EEFB3EC9EFCA8F3A1CE7F4540
+:100A7000BF29BD80FC093A9FEA7CD8C5A73A1FF67A
+:100A8000F0CF98F018997F3BF2040CC1BF5D257F31
+:100A9000624913DF8F83F7DEEC9F45F8F2D134C74C
+:100AA000AADFEC9F68844311707D44795F04EC8F6A
+:100AB000281F88802B4CE54B1AF76A8CF8206C2A8B
+:100AC000679DFF2BF6459475AC3E0F95379CD482FD
+:100AD000C81F699D1AEA3F752198A8E83FDC299351
+:100AE000FFB00370BC04DAE9D898110A821E596C71
+:100AF000E7EBCD0E77A72B01D2C5F11CEE4CD296B9
+:100B0000A01ED49F77DAB91FA4C3DFE98A37F83172
+:100B10000E36C9A4C75B426C72343F09CC3484DF03
+:100B200016D65B3EF78F76E0BE33B687FBCE40CF5E
+:100B3000AB6547FA7C5CBF56CB5E6023366BC1ED7C
+:100B40002E74A177340DBA711A3C9FFDB6CCB76DE7
+:100B5000823EA5AF61DD7184059F182BE17EDE72B8
+:100B6000E29F994D7C1D326B7974792812EFE5393B
+:100B7000E669A87761FDF0B9D10FACD753B03AE27E
+:100B800079D3F5426EAA693D58546BCE0F88F5D4DF
+:100B900037BAFEC96499A47F70A184EB7AA1B7AF7C
+:100BA0009687DE380DE8D3B14F66B8BF7AAA4926DA
+:100BB000FA9CDAC8F753593089E4AF8C7592BED4E9
+:100BC000F1D686F27571EF7AAC6DEB9FB21F423EA3
+:100BD000DAF687E1BF82B46DDB27837720FCCA4752
+:100BE000E97F603DCB4FD865273F73C72E27F17F44
+:100BF000C7CEDFA53F84F0762BF9F73A767D3B1C14
+:100C0000F9B163A1B500F560C700BE7EAADAF9EDBF
+:100C1000F0169A7F17111D33148DE87DAAE92F076E
+:100C2000302EE054138C0AED8B5DB1245FE5AFDA12
+:100C3000C91FD1B1F3DBEC80E39F379E32B1FFD304
+:100C4000E164D35EC2FEC573BF79F98ED1CF2EC0E9
+:100C5000FDF186DDDA4CC89FF0DA5F87A37EED7880
+:100C600089DB4DED6ACB1ADCDF18BA485EA802BDFD
+:100C7000DA51C8FA31B66FD1C4F128473DF1F257C5
+:100C8000F2B39C2F3E26287C3DFBEF8F0FC9C7F5A2
+:100C90009F33649370DCDF1DF803EA895D56E24BF5
+:100CA0007DBCC7EB17903D73AE71DFFB3F6EDC522E
+:100CB000F87CC6BDE0DF9CFFAD8A87FA1729073DA7
+:100CC000F97CE703046F727AA9BFE7C9EF6BFFA74E
+:100CD000D1FD25A0BBEBDCE30EFF3F4BF7B7A70B25
+:100CE000BABB313EA0FCB5BF52FF7EA89E6BF93760
+:100CF000A77B6FE3D7EDFDB72C9EF733A1FC6456BD
+:100D0000ED40C3E2DAD23D6F6742EE5B697BE3B14F
+:100D1000BFE323F67BF4345EE5FEB6F1B8EF03EDF6
+:100D2000B27849AC17F93AABBFB02FFACFCB233B1F
+:100D3000A47FDA63644F30C5B312F72BDF4A9FE913
+:100D4000A5D80B36E2E300C2EE2B056C5E6FFE4ABF
+:100D5000623EDC4AED9F7EFD3EB473D3D264B28323
+:100D60002125FBF775D764FEBC4433AD87AEF598FB
+:100D7000D7479312CDEBA889A2BEAB19EFFFD50ED2
+:100D80002914023C8C1FF0CB44F4A78EBF48651297
+:100D9000C093586011AE3B263ACCF59DC07D6C8364
+:100DA000BFF1EFC5E3C42E3C0E5CE9473C0E90C991
+:100DB000AF7A4E3C62BF096F99218CC7618A97E375
+:100DC00031A1D44B7E6AB11EC76EA21DA3389634E2
+:100DD000A33C2BB89EE678A075B8BE9EEE0DDF4C06
+:100DE000ACCF15D1A48E7F254DF6D9CDF5D1FA5CC7
+:100DF000A7CB0FA5874EC77F942EC9AA992E698EBF
+:100E0000390ACAEB645C3F8CC4F2991C4E0B2AB4BD
+:100E1000DF24D60FD778E628418027A4652A48AF7B
+:100E20007CDBF6228C1FB57925EAC7C56D169A1FA3
+:100E30006C5912E17D488D42F07B16F728A4F7D457
+:100E40002B5E39FE20433FBB4FE306BA9FEF977CF2
+:100E50007FE6CCD86CF4C7F01FC67FDE00EBB75935
+:100E6000AB593806F0345B61C1B804F4934BEC73B2
+:100E7000939FDC0CE3EFAAE4EE7ACE55BE37BDF2C9
+:100E8000CF4E5F013DF6F9458C6DC7946F8A28C639
+:100E9000F5F68F9A38BECAF7B3D0401E8721FB0DF6
+:100EA000FB8A2FABDC3FF3CA1F5F1A89EBDC711D95
+:100EB00043E3B87ECDE271A962BD708A79E2BC0ECF
+:100EC000D4AF83E268BF749FEC8C16E7B841ACBF27
+:100ED0007F83F1289076D4B26A19D757AC93FCBEC1
+:100EE000C15A1B5B1F251E668D6A117E224137F891
+:100EF000C9D9B87FC3DB9F0DAFC619E9D636E5A8BF
+:100F000032BC271DF0F7B961FFEA1FC52FAEF711FC
+:100F1000BF1BEC2D93FC51F447BDC0DFD43DDF91E6
+:100F20009FF4D2A6B516E4DF4B6B2DA6FDD83A553B
+:100F3000F83146B011D8AFA97BECCE2CA4CB3ED96A
+:100F40008BF1A5E54D27B540947DC4487C62FDE852
+:100F50007F6F55DDD4EE0EB57E26E275C7091BC343
+:100F600075F576ADBA385A3FEFB4F27ECE66F5F736
+:100F70000DCFF8F7C3EFB80E47783CAE3F6B99F052
+:100F80008344F21F233E3E55C74238BFE27A15F52F
+:100F9000C2A98D8CE67740C963B8FE0679FFB1D14E
+:100FA000AF7371E396DFA05D50D624B9714BA24CAC
+:100FB00069D1D08F5BDE182FE33C9CE9D1E36FDD74
+:100FC000C36E35C845ABAA10BEF68ED97117B6FBF5
+:100FD000659BC6D04EF1BDDEE9C279FCCBA691245B
+:100FE00007BD8DEBE54A563411E31C843E8CE48743
+:100FF000A11B634CF01572A01FCAD7546BCB3C6F7A
+:1010000014FA2DD324B18F789EFA2DF4FF997E7BAC
+:101010005FD76F01D96F9023BFC09B41BFA544D359
+:101020006F73254F0AE27DEECE412948D7B96FABE9
+:1010300049D1F4DBA64ABE2FBA59C44D7734807E1D
+:10104000BBDCA0DF1A40BF45891F19A3E97EFA73F4
+:10105000E8B7D0BF46FE36A17E8B32DE1B04FE749D
+:10106000FD36BCE920E9B7E10D16533CF0444DF8DC
+:101070009B7AD56F52D2AD681FEF53BDB151F8675F
+:1010800093B0C7378B38466C07F55C95F6C3F45CB4
+:10109000DEF9EAB97F119E753D37772BA3B8E89E3C
+:1010A0007CC8F5DCDCEDA0E724E447AEE7E6EE64BF
+:1010B000DC2F17A1DF86F4D06F8CCA9785F9FBE58A
+:1010C0008D194FDE0DF58DF0A95E1B941FD1ADEF8C
+:1010D0004619F55D95D68BBEDB777EFA6EABD07781
+:1010E000A0C706A27E8DE40F6F9339DE7CC7E8C3EC
+:1010F0001B5F4679F99D4CFB92EF59F8FED13BA35B
+:101100000F67217F7D2AFAF3A2C6E9D95E19A4FAF6
+:1011100027BCCEC757BA91FBCBCB1AB87D58562BFC
+:10112000873CF0E7A431DF69D8FFC29D124B01F87C
+:10113000266BF5130EB4EB9F5799581F4DC934F029
+:10114000C3AC9C62F2FB57D95DEBF0FCD12C85D986
+:10115000D0BF5FEC987414EDE0E21CBE1F502C9ED3
+:10116000EB71B0B3BBF464443C48E39C37FBB39EE3
+:10117000711653AD9CAE539F954218B7DA33EE22E9
+:10118000447AA1B8CEFCFC5D217F37C92D842FF6AF
+:10119000AE1C35EE432FD785A77D024F8017139ED7
+:1011A0004252543C01A5A7642677E3A5F0772D4B66
+:1011B000705FA0F02989F69123C7ADE32D72FC3A48
+:1011C0001E753F77B1A82FBF692D9D6B8AC48B8E8A
+:1011D000E7487C74E13D021FEF695D7EED9118D711
+:1011E000047C437A26F89F801768C73FEE22D3F924
+:1011F0009B8F045E46568F9B80E10F37611C3AE45B
+:10120000E7D5CC79B32FE063D4C79E11389D5E310A
+:10121000C61AC07DDA0DF64ED2833A1F0EB3723E67
+:10122000D4845ED9D1AF623CADF31B2537DA21E51A
+:10123000613BE1B51CF8D10E45F63EF5CD24815752
+:10124000379DAF6A14F313D0C182EB267DBE0AF13D
+:10125000F358239B385DCAEB385DB25827EDC7942D
+:10126000D548DE308CA7AC710EC5A1EBFA197E0E05
+:10127000239DA2F0AF128D7F193A9BB3BBE7CD62DD
+:10128000516EAAB5FA43DCE7990AF2B196D810FE7E
+:101290007716FE3E57FC5024BD2E1378DB847875FC
+:1012A00020FE3AB9FD15FE8ECE69E9F9E54AD084F3
+:1012B000D7094F9FE6FCB753F2A05FAC0B6FC8CFC6
+:1012C000903F4AC71BF233D2A1295746380FF0DDB1
+:1012D00027A3E77871BFD428F7853B0FF2FA9F91D7
+:1012E000BC2CCAB87F307FFF40BEEE4DDE8759C5AB
+:1012F0003A41F0F73BF6CEFD2391BF774ADC2FD180
+:10130000146FDAF7BCC1CAD74D1BEC2007B8DFF663
+:10131000B6EA5DE7E9A91FAEB27239C0F584C7E04D
+:10132000F7BA040782F1A675368A17A47E0CE4F694
+:10133000AA515F6FB2B3A45BB37AAF7F8AA8BF37FD
+:101340007B498787617BA8471BA1BD21DDED45CE89
+:1013500017BAFFE05CE3BA43F0CFDF3B2EBD9D1F21
+:101360001A4F55CE9A695F4C8FAB4AB5045E51D186
+:10137000BE9B2C99E2B7A0E782CEFF70FDB76AA3AF
+:101380007AAF9FA5DAC88ED0CFCB5E2D3B5810F038
+:10139000F6A54F2579012BE383B1387F8C8779102F
+:1013A000922FF78FFAE86ECA97699FEDC6DFF5298D
+:1013B000C57DC81B790C1DBB315322FBE13DAC6CD4
+:1013C00034DAE136E6B38A26213FE747F1213CD7FC
+:1013D00092595B3DC103723DA22E5485A9774267A5
+:1013E000E23B48AF7132437A35FBFA4CC0F9F7BEA5
+:1013F0003FB34CDC8A073B81EA19B18F2561B931D3
+:10140000BE245ACE8C6EF8EAFD5BA07FA3F7CB5EBC
+:101410000F94BB69AFC381723664B585050C78192A
+:10142000C34255E8771A7DC8770BEA8302B07BF098
+:101430007C4941D3DA2A17C2AB257ABF3C1898E41D
+:1014400082FE6DAA3939E932D40B500EAB295FCD3B
+:10145000CB95D74A5E0C71CE6B5A41F14879B512E3
+:101460001D60DC1492988DD71BB241BD9B56C3FB07
+:1014700059387FC1FB586FEDC9F76F41BD03FDA41B
+:10148000F737F2FDFA3C78CF8372523B87EA2B5C48
+:101490002D313C0753B091CF4F05FB552FE637EC6C
+:1014A0007E8AE6DD29D05EDF0C9C8FC213E93CD139
+:1014B00048C94DE7381FBE80F456070E185FF0A5E7
+:1014C000F3F80949C062FDA3DB7FFD6DFC5C539E10
+:1014D0007781D607EA79272729C342FC7492F6E17F
+:1014E0000F01BE03569C37793CCBDE9C2FB416C34C
+:1014F000FC98631B44EFCF6A1C47711EB3999FE2AF
+:101500003CA68EE676E7BB57DA43E8EF7B57ED4C17
+:10151000C3E77BAFB4D2F3F64D5C0FB70F6821BFC2
+:10152000FBE1D52AC3F32F55AB65D2138737AA74D5
+:101530006E577E86C737E46FE276C8DED5BCDEC361
+:1015400075DC7E9BF0CC6D93701ECE5FCFCFF9EA39
+:101550007A5A5F87E6B90B4DF35BA49ED5F570A967
+:10156000C04741F55ADA4F8FD4BBA5FA7C18A16F5A
+:101570004B719F9DF6D3C32447A5F591F1658E6EFF
+:10158000BF0DF243F83BE2EFB2FD2AC3758DF4457F
+:10159000DB248A67C3F91EF24737493E8C7B28F863
+:1015A000D81A227B3C943BE33F709EF9C4CAF0C832
+:1015B000482BD203F4548EB5F38FBF84E747DFB3D3
+:1015C00061E410F04F2EE15F8F13CE5ACFE37EB26D
+:1015D000DE5B998CE78DD9C43EA407F26B641630AC
+:1015E000E88DA392EF963BF9FCE046FB47A76B968C
+:1015F000569D87F36C918DEB47CF7A95CE8BC70BB9
+:1016000018D60B3EB4770AB7AF48D60CFC50B87367
+:101610004532A80EB644C4CB548973E6851A6FA729
+:101620007097E45E6B6847AF47AF57DBCEDF1BB404
+:1016300093A7BDD55F88FDA3717EADA1DE88ACA761
+:1016400047FBBDD493F35FA757E2B9FF9C77650AC8
+:1016500076CFF962CA20E33E8F9EEA7EE6ECF72D54
+:10166000CC67C05FCE1F6398CF40EF865120FF400C
+:10167000BF1B1AB93DD730EAA0569A45B01BE5BD4D
+:101680004CF8A3CB26F2FDBB86CCF716A1FC4FC9C4
+:1016900092881F5830A0F54924FBCD83FB00F959EF
+:1016A000FCFD7C781FE5B2E1292EA7A02F3CA84FB6
+:1016B000CA56AF9844E56B250FD6DFB03697EC924B
+:1016C000821C99517EED41B2930A1A0F26A23C83E7
+:1016D000FCAE447BA06CACD58DEA58974B5DCEDF59
+:1016E00015E76199CD3D0CCF77E0765834F996F740
+:1016F0003361B772B92CCFE172FBEE261547783E05
+:10170000724E72ADCBB18C729CD52DC77B574FD02A
+:1017100050AE0F87248AA399807A00E57C831EE768
+:10172000C4EDD8F395F373D999A520BF385FEA7259
+:10173000AECB75A43C372B2DB7623FEEBBD24EE348
+:101740009870D5F60FEFE3FA8AF65F275CF5603202
+:10175000EAC73C85C779E9782D55785C608F7EAD06
+:101760005CA0F53D9FFE45F4E333ABD95F126F8B70
+:10177000E7F1EFB52AF1FDB9E4B3879C9DA77C9E04
+:10178000AF5C9D4B3EF5F6E59DE67AE2916947F543
+:10179000ACAF1DF018063CBEB5F1598A0F3EF1C240
+:1017A000C1A94887E21DC0E7C85F1B9D2C8C7A4EFB
+:1017B00009D1BC55D420D33903A684B36F711AE57F
+:1017C00098C775156F76123F15BD640D4D81F78B67
+:1017D000B67D319CE26A167652DC5AF005612F071D
+:1017E0005B86A31C14293CBE2C522FFCDAC6EDE705
+:1017F000B6EDB1D3707C521DBFDFA2A8FE76D56ACC
+:10180000D8A778C2A652BB508EF67983C0C778FE9F
+:1018100017FB67BC57418F2B6BDBC0F54451A31AF4
+:10182000C27B328AEAB6B463BC71D1C756F27F95E7
+:10183000D79DA4F31413366F22FF4A79A36CDA8F75
+:10184000EB11DF592787AD1897D8504AFB90001F3E
+:1018500024B85EC453FEC0F8C3E2CD3BB705018592
+:10186000C52F3FEF42FD72AC79BD0BF10EF59E35F1
+:10187000DEBA473C67FD23229EF386C3746F4B2F6D
+:10188000F19CC7F00F1094B76DE6784E56D787ECF1
+:101890004BE867B63FCAFE47977DBEE9EB35781E39
+:1018A000A1EDA5E36BB0DF257FFB720DC689B15DAD
+:1018B000769AF7CA5FF880E2B7F5F7BEB0097FC83D
+:1018C00086E729FEBDFD13AB176B6BDF79381DE38F
+:1018D00006DBB77C978CFECC793BAF267FEFBCADA7
+:1018E0001352589479434F917F43E7117F1F49B7B3
+:1018F000BD0D7B299EED04D01DF560579C6E7D29A2
+:101900008F7FF688F8DC8DD1CF3BF488C76DB8E5C2
+:10191000C62B51FF37707BF29C71B9EF033D2F3F0F
+:101920000F3A6E14F1D7F5379C352EF704FE01F40B
+:10193000B2D8CD74FCBA61F6AF9FC6BC863EBDC6B8
+:10194000E586CF037FFA798A776C3EA71DE5E8A587
+:10195000DF503C34D26F8A07E7A3AFD3F13CCA1102
+:10196000B5733ACE3F9D3BAD74DF4FD1CE8F489ECD
+:10197000DAB7BE477E6A26CE35B4B3AE1F8F3F9727
+:10198000C4786B9D3C9E57D001E37D3D2E7A2EE2BC
+:101990007A395FEBF1BEBDC5F95E6D1F28EE0FE031
+:1019A000F1C8A5B57F10F1B3DD749372905E07CFD7
+:1019B0001A47ADE3C12DF472771C7BF4B8EAAE3858
+:1019C000F608BA213D719EEA8A5307386D04F94939
+:1019D0003E8A762EA27D2D8F7F6F57A39F37D6E349
+:1019E000DA7D11F4D6C7DB9BBCE8727BAE71FC508C
+:1019F0003CD16642524F7CB57D1F5DBFCFB44B7F5B
+:101A0000D7FABEEBBC548914791EEB5EE4CBD286C8
+:101A100083E4CFEC5A7F8BF1B609FF7BDB0B32C539
+:101A2000392FA9DF4BFA3D527F94E1BD2D51FA7B4E
+:101A3000BF5DD8E78D7CFE687BC91972403D6D7B28
+:101A4000B6135F976D3C4871D66FD6BDACB518E242
+:101A50002770FE0819C6D3F6E2EEE1A4CFC5FD302B
+:101A600091ED548976CA9BA2B753BEF1A4A99DE219
+:101A700060BDE6769CBBBD638AEF76ACEF5833B7AA
+:101A8000138FD5CB9343D1F669ECAAD8EFAFE629F3
+:101A9000CCA3740F8E93DF7B23BB62C8EE9CE7CC94
+:101AA000F9382E11538DE2BAAA168838B09F7A53AE
+:101AB00091DE55CEEB18F67731E2D7E0FF51DD012C
+:101AC00086F6AA9AEACF42BF43A4DED1122D2C6437
+:101AD000A0F73CE7E4140FED8B84D3909E07320F00
+:101AE000AB58EF6711FEABCF14B62405FAF7595087
+:101AF000F22E807AD9F75F0CF03B7BD6AFC381879B
+:101B00006593BFA9CCDA7900D72BEC353BED47C8FC
+:101B1000BBEC747F48F91A3B8D77EFD66F9F23BBE0
+:101B2000FBD756C6F787605583F796B9791D87B7F7
+:101B30007EBBE62F6857E3CBD07EFE1A288FEB8959
+:101B40008DB1B4FEE978298EEE51CB7FEDA1A9A825
+:101B5000D7F263393FE66F4E0955417DAD491C6EA2
+:101B6000DD3480EEAB287EC949F1A57BB7BE528635
+:101B7000F354FBE6580C3360EDAF09FBFF37E27E10
+:101B8000AD1AD5638C332F648AC7782EA818615399
+:101B90005C13233F06C911FAB11AE3E83C11D8C51A
+:101BA000A67A4EA89D0F78898F83FDF839AA703FD9
+:101BB000D40791E5F4FCFD767E8EBDDC0AEF39BAE0
+:101BC000CB976B9D791CAEEEC7F5493395FF44E783
+:101BD0007391DFB35E5EFE23BDDEAE7AF8FB65E295
+:101BE0007E9B48FE3DD4A557FE7A71B4FB5BA2F400
+:101BF0009F9EDF2FB1A005ED962D76BAB70BEF674C
+:101C0000C0730EDB34BEFF55E20AD3FD393B843E80
+:101C10002E8909D37D3EFD443FB03CC2CCD6F22292
+:101C2000D2BDF4153BC3F8B3D2D79C3EA477E9B636
+:101C30006F5B7F9585F18BB1E4D72B7DED7F111F15
+:101C4000945AC3D3E9FEBC2D5686F7E7B56D793BB0
+:101C50001DE5B54D0DA7279C655FAFB4DE6ABE5785
+:101C6000408CE35865E842BC77413FAF5BD48B9E24
+:101C7000B93286DBD7F6189F3586E4DD7C4FD4B1C8
+:101C8000CAC641C6F3FB459EE87AB17F8CFA8F9DA8
+:101C90004377F438F7DA3F2609ED99E66474409605
+:101CA000813D8EFABCA8EEE430F41F7C16A3DF6FF2
+:101CB000E089C3F9E833AD7318EABFCFD23B871987
+:101CC000E7992395368FA2925F87D28EB527F3FAD4
+:101CD000318C37B54F8BA6F786C5C412FE8A1E8E8F
+:101CE0008D7A8E7A4C0CE7AB34681F536C17E54342
+:101CF0006FF7332D447AB831C6C3EB490B69F8BC92
+:101D0000B86EFB20231E0A956A2A07724AF82C64D3
+:101D10002BB52C83FED6DB2B9CEFF028743F81F291
+:101D20007FBAF855EEA6333991318E51E014665CD6
+:101D3000F233EBE74814D56F43FC69CCEF5664648B
+:101D4000956A92F718564FA903CC2E7E5F5A054329
+:101D50003D7944ECEFA31F0CD36E7C3D487A3F38AD
+:101D600080B18B32F0BE094F9CDB80BF6B70B33EFD
+:101D700009E3692B18D71753DC688F48C1003B0370
+:101D8000FC5455593788DF03C27C182F49262CF4A0
+:101D9000CFE57EF33BB483804FF93D8457B15015B6
+:101DA000A018C386C9EF3A9EF1FBF3967DCC8CEB6D
+:101DB0008F12410716DC4D7ACCC1BA7F9D00A35A21
+:101DC000457D5B15F7B71CDC9F73B85918EDC358F8
+:101DD000070BC742EA18AA1C33CABF2B0B60035F6C
+:101DE000BAC79AF323E502F45A44BBF5843FA8F737
+:101DF000AB887ABF8AA8F7ABB3D5ABE3A9DC3628AA
+:101E000003EFA5585C592FF0C6DBB309BC017E86F1
+:101E1000E03D7FCC12E315FBE684D718D11B2B964F
+:101E200007BA6E8EC9207EFA59DCAE4E8C97668951
+:101E3000350CD7C38B24FDBE4FE67718DE636E1BCF
+:101E4000C9E123A29DCD02CF8B74BF558FF276B22C
+:101E5000BF7A94B7F7563E267A79676FFD898DDE93
+:101E60009FF85EEAAF8E8D5AFF0FD54B65AF7DF4BC
+:101E70000EEEEF76E92737A0DE6C676E46FD541A4A
+:101E8000DFFAB7167AC2ED4C5B9A99DE31C8DFC033
+:101E90006F31179A9F47F24914FE72F48571DF295A
+:101EA000DABBF3617E5E4DE7835C31BE89B57C9F12
+:101EB000FCEE79DC8F07CB461FE6DF25F2EFAEE1C3
+:101EC000F6E3DD0FCBB40F1B79BFD5C1FFCDEFE13A
+:101ED000B8071F80BCDD335F0A8533A2DDDBC5DEBA
+:101EE0008F877A6788FE44DE8315609E49CBE4685D
+:101EF000F76071BED4CFE145DE7F318BF9C5FD6659
+:101F0000E6E759316EE2DB2225A4550FED9EC7822C
+:101F10002B80EFD1FE04BEC7FD2F599CC7662E8DC6
+:101F2000C7D7DF9A60D27FA78678E270BE66AF8B94
+:101F3000E76EFE7CEEB59E14E37945E574ACE91ED0
+:101F4000A02AD59B8AFA4D3D7D3DF3801C6AA707E8
+:101F5000318F211FEC56127E0CF3243D95AA84503C
+:101F60002F2A6E3FCB47BB379EF3B35E5E4BBCAEB2
+:101F7000CBCE7C17FE1D46E681FFCF5DE1A1F3DFEE
+:101F80005739FCA771FE955D39DE80A3273F04B762
+:101F9000F27157E1B8337A8EA74AF37AC9DEBE0EE2
+:101FA000E645F2CB796DD83FD9EAF9C883FDFBADA0
+:101FB000CAD00FD3133FDE2321C83F15EA4F712447
+:101FC00072DC94C1D8FE72BC6F14F4FF3271BFE8AA
+:101FD000A24A26521E57B708EF1FA53447A43E91C8
+:101FE0004EA6728F8A7B4A97547A29D5F16BF356A5
+:101FF000D33D98B60B79FB36B7A05FA245E02F40E2
+:10200000F6972DB582F61DEDEE8A30DE27C7D26039
+:10201000DEC161B9AB09BF9A9B91BF13CA136C456E
+:102020001852B5660AD1497157B07CC84F7504067D
+:10203000C7A27DE331DF87694D1D71D6FB31BBF847
+:102040006D13C7FB6312E7B748BC3FA6367B306E03
+:10205000E2B16BBBEEAB22BCC37288E3FD3FF97EFD
+:102060006E4FBC374F9B69C0BB337B32E1FD6702CB
+:10207000CF4B055EAB041DAA043EABC4BDAF55E219
+:10208000DEDC2A81DF2AC43BA48F887B7B17233DBB
+:10209000209511EFC0BFD6A14126437B7C0F0F5284
+:1020A00087E05BB785FCA4B2C3EF43BC5B1339DEAA
+:1020B0006D0EA003F135E0DD83F941C2A7EAE078B7
+:1020C00086F29C0E025610EF23F139A707E0FDB609
+:1020D000D824D487634C78D612C79F1FDE9FE2F3C3
+:1020E0005BA290F348FC256AFC5E605DBE7BB38F0B
+:1020F000AB445C7695B89711F18876CD2AC00FBBBA
+:1021000098E3933F1F22602FA54962FD5F0574C0CD
+:10211000FC27853D8478C674672C5FB7245A2A76DD
+:10212000AB88A7047EDF0F4B0CB2B46CC64380F1C2
+:10213000971A641E84F5FDE15A33FFC86E25E27ECE
+:1021400049CF93C86F2BDF562DB87F2FCFBFDE74DA
+:10215000AE5B9EE68BF710FE0312DA353F1372B8C2
+:1021600002F985FAC7D7C38B051F2C15F7063F2246
+:10217000F8E73121CF8FEB7CE3E5E748964FE6F1B6
+:102180008E89991671BF629819E309E3BDF54C83F6
+:102190007ED1DAC64329DD9FC93EB692DCC60E6504
+:1021A0003EE4AFF88F1F0CF1FB70FD7DD11E8AD786
+:1021B000EFBF1DEB89BF830EB4871571CFA4CCD7B9
+:1021C00093CD51EF8DADF2EEB1A15FA6B7FEECBE9F
+:1021D000691BF173DEE5441ED627E0BF6336C08E6F
+:1021E0001A5857C12FD61BC85E8C7AA5C649FCEB7E
+:1021F00080FEE71BF824B617FFCE54C7B51B505F0F
+:10220000BC80062430C12F6A06D911CF80730FFA23
+:10221000B156A9FEBE382FAC8A8FEE8FFB652CDF3E
+:102220008770655D6AF22BAC547DF49E7BAC59EFF0
+:10223000AC14F344C244B39CE8F3C24F457D573914
+:10224000023BB15FC9A727923C27DE1C7D9EA852A6
+:10225000B520DEF751358CCB773057E3F6730FFDA1
+:10226000C3689FE45460F03AF483E97CB690717DD2
+:102270001764DCAED4C7F504F2BD15E70337F13FB0
+:10228000CE0708CB176AFCDEE3BB2DE4875822E4B7
+:10229000ED512167CB857CFD1CE5CB8AF7587B2966
+:1022A000FD8590AB952887901E8FCDE0F6BCB83F9A
+:1022B0004C5FCF2CB48DA0FB22AB1C169A17944F09
+:1022C000AC2107AE0F768F76A3FF477666B9034E33
+:1022D000CCCFA2FBDCA5F82C37F2CD37CE59179C1A
+:1022E0002D1E16C84FF7162B2AF74BEAF7C8578949
+:1022F000FB0854F7CD0CFDD54F2656D829DE359670
+:10230000C787D7E46613DE811E9DB186755ACAB4AD
+:10231000EBBAEEFBC3EA9FECE55E83EF85DE606916
+:102320004176A1414FD488FB249927C88618F4C56B
+:10233000C28B2631F4EFF5D413BDE8CDF55C6F2EDA
+:1023400092A2EB4DDD8ED7F566A47ED1D3C5174C96
+:10235000369DBF541D5E467A6748743F42B2C3CA79
+:10236000F72F99D79B9BD1331FF095EC30E00BED05
+:1023700021DD6FF1E328E389D49347AED3E7D7009B
+:10238000DD3B344BF33C39FAACF3AB795EC83FFD2F
+:1023900008CD4F79A747535A50732DD9230C77692D
+:1023A0000CF72E1C5E7DBF0BE97BB846EC9FAF5649
+:1023B0004318BF74B8667119C1D5760FD266DC2F89
+:1023C0001E74E13D4DB3D6C8B49F7E2426984EF1CD
+:1023D0009FDF9F39231BE26316AC5D9A8EFC386B3E
+:1023E000DD523A377B24C137D86F80599687EC7914
+:1023F000FDFEC6BC67AD3EB4C77BE3DBBCD5D1FDFB
+:102400003D55F827AE53987708AE4376BBC6748621
+:10241000810F8EFCC24EEB822A2DD88E70D5BA5811
+:102420007C83552544BF0F28D571B50FE994EAF098
+:102430005D8B297324D07E4FEF72C4DB6F455F3B09
+:10244000EEBB3E2DEE45023ADD64F2BBF27DD7567F
+:10245000E14763B65EF26344BEA7977C178F936231
+:10246000EEE8F97FB7FF69688FF55D318EBFB4E69E
+:10247000F8924FE889791FA150C48BCF5A171B5A85
+:102480001845CE6689F3C7B3C47E99CE8F85D7EB46
+:10249000F639E7E3483E975EB884F8FACB7D2ACD5B
+:1024A0006B65C0AFA8EFA51746D37D500B9EBBE26E
+:1024B000718C0BFC6ABF4CF925A7EDC4C7ED3FF545
+:1024C000D23982CEDFA9F49D88AFF65D4DE701DAFF
+:1024D000C5FDD33A9ED29C7C3DBCC6C1F550DEE919
+:1024E0009F913C74F15768A686729E77FAE75C5E0E
+:1024F000F0FED93138ECEBDE1C77A1E06B80D72CF5
+:102500009F346921D49BDFC2E58A8D0D96911F7B94
+:102510006DACF7D128F2BFC6E131F9B5F25B96F3A5
+:10252000F7C0AE4C34C499CC12DF7BC83FCDEF6509
+:1025300065EE204B457912FAB05B0ECCF772B7DB33
+:10254000CDE3D4D317BBC6798569FDD63DCEABE8C4
+:10255000799EB053F25B4613DC3D9E5F8D8E369EB6
+:10256000EE718CA5F2EDF1D1DBFF50B4DF5A59C00A
+:102570007CA04F8BC4FDBF79A1FB34D41F79ABE3A2
+:102580001324C3B8F26B8A4DF14F7935B974DF5F0C
+:10259000FEEA5CED5E83BC76D185CD36D1E543475E
+:1025A00080E832D5E1DFE340B97CA1F0814F3D58AE
+:1025B0002FA7D3112D38BC82F4DB7DAE68E7A73E90
+:1025C0008CA4538DA013AC1FB20C74D2E913F97E06
+:1025D000EBFAD2073EC5FD8BA7F8ED45BDEBB10880
+:1025E000FA6544C75FA783F36B2BD80F81F3C2DF73
+:1025F00065A6F8BB5EF127E8ADE3477F0EF6DF5135
+:1026000094FB4E94CD51581FE78773E1ADBB7DC15C
+:102610000FE3A28F27C5A9F3C37C1604013EAA715C
+:10262000FBA3F7F13CC482B6F3184F979C2E36F10A
+:10263000438A7301975341FFA37B1E21BE6E0DC5D4
+:102640007AED19BD8F27C5D90B1F5C186443B3FF02
+:10265000EFF1C111CD37F8299C4760DEC279BDF09A
+:10266000F9C7861BFB97EA1897E6C479A9FAFCF626
+:10267000B783E3BDFB701D1E5C277BAB6048258ED6
+:10268000C0607CBFC8F5F437E8DF5B14FFC4F068B6
+:1026900076F4E2CA7D97A0DFB5AAB2995255D8C5A3
+:1026A0000CEDE20CFE5D8F68F7055E2BF4EBE2CAE1
+:1026B00066EEB7B50599DB70CF003B3292FCD88A45
+:1026C000C36CCF696AC08D7E734DDC83A02A81659F
+:1026D0001959E8674ACC0C1AF0778D93EFD72C4F35
+:1026E000DDE3C6FD102BD48FFE335B9A72CAE4770C
+:1026F0007B5D99E5043AE9D744C7B07A9F24911FDE
+:10270000F254841FF294A91F89CDA67D8A48BC2863
+:1027100036FE1D288509FFB3C087FE9DA4A56E3E29
+:10272000CE95C28FFD04FAAF2F023B36D645F6C1D7
+:10273000920B2C7C7D6853E8BE2B6B3C2FAFC5F110
+:1027400071D871FF43C6F559986027DE1026D3D59E
+:102750008B12C2F1CC2321DC878597E07AA3635CDE
+:10276000CB03F8FC797B20D70978FFA66FF301092A
+:10277000F733FC818B11CF357230D303E57F2D7792
+:102780006662B974C8FA3881A717E0398780619FFB
+:1027900094DFD7DC0DCB3DE10BE62B11FB86DF5F31
+:1027A0006CCCB7C7F82AB01F91DFCB4AFC42A2FD20
+:1027B00041FC4C079FFFFD343F2F77F27505F10771
+:1027C000F2D73E6E3F9D523C71B8EF87D879DDB4A9
+:1027D000EF63F3BC6E684F11EBD85AE057C5B04FAA
+:1027E00077A1E2B3203F5D540DCF8DFD8D62272789
+:1027F00038E8DAF2A876BDDE3F3CAF83F8944F4F5D
+:10280000227B24922F7674ED27F0EF69DDA1339EB1
+:10281000B288C3F14CFFD1FAEE93AEFDAA451C7607
+:1028200073A8FC5EBE3FFE696E1CC599EAFDB8A3A5
+:10283000696933DAC57734F59D89F8BCA3E0E23FD6
+:1028400063BA43EDDC138BFAE27E89CE97DDF9C1E2
+:10285000EB6A2CA45BDF5F47F71F3C2FE4713AEB78
+:102860005491FE01E6D6F87E5788DF47C5BC02AE1C
+:1028700057D15F71773874DB0D00DDF37AE80634E9
+:10288000F7A6EFEB7C03D543A0DE3D89F694F4F781
+:102890001ABD6F7298BFD7357EC546E3E91EAF8D6E
+:1028A000C6AF8F0F7A4AF8EFC28FB8F74DC7C7F897
+:1028B000997CDC77C4DE751D3BCB3AE00EDBB03F84
+:1028C000F3783EDE9F48FC7C8559A01F5F74FAF6C2
+:1028D000203F3EE3F4ED45BD5762EB4C570692BCFA
+:1028E000BC85CFCBE4C005C930FE130302172721F6
+:1028F0001E9AFB9C97BD7FC0CEF9FB809DF3F781AC
+:102900000C9DAF5B9CC8D7EC74228D53FF7EC792A1
+:10291000AD871FBB1DF8FBC4DBFC3EBB52D973E384
+:1029200043E4979699312E3E323D20FC0C2D5D7C80
+:10293000C8C73B43E1F232A32196CEC1CC982F9B6E
+:10294000EEDB9F319FC7C332A579F8ADA675C222D1
+:1029500011D7D2B31EF48344D63373FE04BA17657D
+:102960009BE61E477E91359CCF664EF4C9788E60FB
+:10297000CC3289F6F1471FF234B6003C3314EF45F0
+:10298000319DF9E07F0DC2FB51CA9AB97F34459E53
+:1029900093F9534857EDE1F33DC273104F0E9FC7B3
+:1029A00061D8CF69532B32DDC8CFF7387CA80772C6
+:1029B0006FF57D8274D5FD22FABCFB0AD801181789
+:1029C0009A7BB72707F924B7DEEEA3D4C69418D0B4
+:1029D0006BB90AB3619AA231C58E690CB3619ABD15
+:1029E00050D84F353791FDE0CAF16B78BF796ED37F
+:1029F000F35FE3FBF94A78B764E0ABDCA6B7BFA3AB
+:102A000073763E3FC5FD5E56A799D69FC3EACDF0CB
+:102A1000E58D6638336C8647EE33C36538366867B4
+:102A20008CF81EE19E9D5686DF2B2BDE6CA538F4BC
+:102A30005771AEA0785E3BE9C509C54DD91827711D
+:102A4000FC45A705FD953BFEFA32C559746E8A65B3
+:102A50001867B8FBD318168371BC9BEDEB30BF1819
+:102A60006887FED9E2CDF6B5184FB3ED529D4F43BE
+:102A7000140FB5ED6FFCBC4BE7066B08E32E8E6FB1
+:102A80007FFE45E4CBE31BFA931DF6AA14B4607DE8
+:102A9000C14738DDC708BD3E46E8F5E23AF37AFCA7
+:102AA0000A976EAFBA87E2FC372681E3BBB5B22F37
+:102AB00087C5772574FB6D8CB067DD40CFCF8776F7
+:102AC000D37988D0CF79A17B351FD16B410CEAB384
+:102AD0008EA3DA0CF44B5D5C63C6A3CEDF9784CC87
+:102AE000CF27BA24A1E70CCF33305EC5B32415E756
+:102AF000EF67A3DF537FBD8BDB192FBCA0E9F2206A
+:102B00008B7B2A99C770AEB25BEFB379FD319E081B
+:102B1000E935B0FB797144BB7AFDB12E2ECF5FDA77
+:102B2000F879824481876395FBC86EE8B2232B7DD8
+:102B3000BE890638AF6677722EE16F77F2BD86F9EF
+:102B4000AA64C3DEE4BB304EAE4E418F362BB9E3F0
+:102B5000B99F8F49C4E7723DF613F3118F6DF56F7E
+:102B6000B8B01CD8D9238C7167F93557FB261AE405
+:102B7000FE87F2B94EB71237C7CB2B39CD93F09CF5
+:102B800048710DFF8E6171FD6DB7DC80F85ECDCFB1
+:102B9000D3672BCC2F833C966CB9EDFA61F0BCFC6B
+:102BA00099515EEC0F54712B3E2FDE7892CE153D7D
+:102BB0006AE1FE8E48FA04059F3DFA134701EA399F
+:102BC000A8EF75CB087A7F9F05EC9B23E383EFDCAE
+:102BD00005458EB3FA0F6FA0F830339F02DF4B68C4
+:102BE000BF75AE97BCEBE8E9C2EC9BD154F72DA0C2
+:102BF0007879C88FBA7E290C99EB89A4EF6AC16FE6
+:102C0000F01B62E493C8727DA604E9DC74C97CD031
+:102C10009306FF43C9A16A8ACF8D6C07235898C1D8
+:102C20000EDA81E17528979B789C16FC245BB688A8
+:102C3000631FC461BAC715F91118A2F85236D183BF
+:102C400078BD994DC654D7376D39F5C3B1FCAB5239
+:102C5000CB73BFA2FA9C24E76DEE30DD6FDB4F9C97
+:102C6000476FF37058FFEE8F9E5FD464A7B8AEE352
+:102C70002734D2BF0B309E14CBBF68B758C0683D15
+:102C8000BEA5CF788C536EABE7F7A51FABEF335ED5
+:102C90003BCBBC1EA94FF4F9F620FE391AFD7ABED3
+:102CA0002617CE838B781C774A9F8ACC8A2874D2C9
+:102CB000DF4BD42A3271FDD3798FC3BB8EF014CC95
+:102CC00050C8EF9F4A7E9A5CE19F3AE8F6BFED025A
+:102CD000BA39A1AC0FFE25EC93D7A1DFF30BD9FBDA
+:102CE000807B50F73EFDACAC009DDFA30FF440FBB2
+:102CF0003315165680DF66E23C359C609A4F67AE0E
+:102D000096289E71D672F378F0BE6EE3FC5AC0AA84
+:102D1000A9DE22564F69C16A737E21CE472E3C2719
+:102D2000C7E3768A6ACDF9FAB9C0928D67ACD1F063
+:102D3000F635D3C7E7FB02C727DD6CA3FEDDB72A54
+:102D40008EEF7769CC87F36DE72A27E9FF6216A03B
+:102D50007EDC29E6FDF207737DB320ED983FD33783
+:102D6000AB0F9ECBE7F3232D19499EF9BD7EC5130A
+:102D7000597800BFCF87E1BC5BDC248587216C03D9
+:102D8000511DC19FE3BD26387EE379367DFC386E48
+:102D9000E373F63EA76F119E9B92F9B88DF9250259
+:102DA0001F251BAD267FD1988D52D079399EAF6AF1
+:102DB000A1F7CA1ACE584DF58A791DEC016607BAFB
+:102DC0008D29582BE3605675E9F1D025D1CECB1C67
+:102DD00010785C755B5E5F94DBC7D1BEED27109DFC
+:102DE000437A4AF8A358D806EDC58CEC82293F7B7C
+:102DF000218793E21EBDA6268DBE2F4AFB61336557
+:102E0000FF9B780EB3323ED0370EDA9969F1A52BCD
+:102E100024BFBEC1E46F9DCFF1F0E4888A4B2AA2A3
+:102E2000ACB7753A3F21D5539C40703B9FA79D5945
+:102E30009D6AC0201723E3B8BE8CDBD342E78F3AEC
+:102E4000B74A74FEF929E9209D0F7EEA5A0F43FF25
+:102E5000402AD009F5EF53125B84F7FC6535DC346A
+:102E6000E70DA473568C17E30F4A1BC6C9A50E1AAB
+:102E70003FB7E3622BD6E2BE54CA8C212390DF61B8
+:102E8000DC336E86E7A3E33CD45E5F07A77BEAC230
+:102E900060C6DCA1D8BE7FCE1B288FC362E8BC7C95
+:102EA0000AE0CA9940E932B4CF5259E66EB43353BE
+:102EB000A77846A04F7F958BB793649167DC84F623
+:102EC000E3080E273C2CF9D61113AEA07652ACFCC9
+:102ED000937AF81CED4D1BFA271C067A4FA8C8C43C
+:102EE000F65306F134510BA7613DFBBBE81EA075FC
+:102EF000C83C37237D3DEFBB7129B82EDCDF060BC4
+:102F000075D063FBD3F4FD97B083ECFB0B87F0F235
+:102F1000C24E9997C9CFE724A6EBF6152FD7A1FA91
+:102F2000E246A25E7D8FDBF95F397CE407BF42EBAE
+:102F3000E53C80A053F9E9581632CC0BE5D3BE210D
+:102F4000FBB3FCB4CBF41CEF0935C6959714ECA188
+:102F5000EF3B94B2663A9F505A6F8E83BF22267A17
+:102F6000BB3A9F979F9659306ABB9AF9F9E93E2C74
+:102F7000D8275AB964F3F3D392196EFC569453E8E8
+:102F800039CB6971E1FA710ACE47A8674296A07AF7
+:102F900079375DDADD2DA679A8DDC3E10EB1BFA8D2
+:102FA000E7EBF5B74FD3C4393D7ECF7B5B252820B7
+:102FB000C0CFD34D27C9DF5DD2B49BF0A3F3453713
+:102FC0009E6259D080A7E4AAE6B00564FCE9B8FD8A
+:102FD0004B875E0224D9A3CBF33B4B7D63211FBFFC
+:102FE0006B6190EFD8AC2E792775B3CA220BFDF038
+:102FF000EED289638D302FDFFD7EF3351381B7B2BA
+:1030000086F2F76BE3DE7B6B21C606759D3BE84CD1
+:10301000F73B0DB02D0276003CCC00BB23F213230E
+:10302000F25323E0345EBECD194E97BD8C6D8EFBFE
+:10303000E01A05F45C5BDFF074BC796479D547D79E
+:10304000E0F78E4BB3F8F77BCB9A24AF64D0A3653F
+:103050005E1E87E4F0B6683387221E9ADF447D50F7
+:10306000D228B971FDE0A8DF122618DFF318DEAB15
+:10307000E7EBD392FA83F45EAFF50FB1903C3F3AA1
+:10308000E4732A77AEFD2D36C5FC3DAFDEF6BB52AC
+:103090002D81B750DFEAF7C7B76DF9A8FB7BAA20EF
+:1030A0007FED7D7D7B499F469C5B2FC7FE38BAE54F
+:1030B00045C7E3A3434ED17DBA7F18D6F4019A07E2
+:1030C000B1F34E2EC0AB75FF547A7814DA5F7827CF
+:1030D0002FCE1F4F48A14B705E7A9A052EC176EF16
+:1030E00029BD68377E6AEC80DAF20C5E09F34DDCAC
+:1030F00049C2FF0167CB00FC64DDE9C7FFC2E1A460
+:1031000016BA09E6B6EAEFAFC1EFCD1E18D032C04D
+:1031100002F0F78F5F3A99E08B5A9E41F8C2EA04B9
+:103120000E0F6B1920C3FB03837D2623FDD6BBA3A3
+:10313000CBFD09A16FF4FEC50EF61D8943FBAA84E1
+:10314000CF3B782CDA067A757AD1B14DEB011FD3DB
+:10315000FF2396F4DDFAB65BAEF3131E827E8C6F0E
+:103160004C11F8A67991F4BB42F6445F9C0B13BA5C
+:10317000E9E94C6FF6D0BC7169C516B41F52A60FB1
+:10318000A579E35597EF27EE51DDE9E9249EFEC4CA
+:10319000EDE6FA5BB650BC46CA434EB2AB1E17DF33
+:1031A0006700B923FE7008BA58DC7C3CFF0D197328
+:1031B000D11B0080000000001F8B080000000000F1
+:1031C00000FFDD7D0D7894C5B5F0BCBBEFFEEF26AA
+:1031D000BB9B4DB209F979F343081071139318A9F9
+:1031E000D64D881831B50B22626B7149F84930C948
+:1031F00046AD162DBD5948548208D146040AB8E19F
+:1032000002622BFD82458C1AE88288F62BBDDF72A4
+:10321000EBAD3FBDD71B7E8A884256B45CEA6DEBAE
+:103220009D736626D977935CA87A7B9FE78B8FBEC8
+:10323000CE3BF3CE9C3973FEE69C33B31ABB86902B
+:1032400064428E25DC30C74E9FDF31E6159D4C224F
+:10325000A4BB33F49C494BC87B1221C44548F009F8
+:1032600053687B0E21DFEDD1047589B4DEE14D7327
+:1032700016D1B2447CBD45C3E5BD7FD5DEE5B3D2F2
+:1032800072312DD3E7AB12998BF533BD690E5AFE1F
+:1032900002FEAEA7E51E569FAE25AD589FC3BE7F6A
+:1032A000AA84DCE5A3CFD4763A6E297DAE9DB8B56D
+:1032B0009D8E6B918917CA0BE7166C5D4E616A7320
+:1032C000CC427889D79B2651F84E36E66A56D1769D
+:1032D000BFA7AFC835845C51E0CDB097D1F940FFAE
+:1032E000741CD2442795363CFE1C9837ADAFD77A74
+:1032F000B3643ACFDB1DFE39D0BE5EE39D42B4D04D
+:1033000089B7C07705B423889F39763BB627F2404A
+:1033100019BCFFFF084F95B8EE5F114F77EF34757A
+:103320009D2C24F8F705FDB7B9D7A12A07FAD2BA20
+:103330004E1A87CB77C3FFD07148AD2493143A2C33
+:10334000AB226E8DFF36E8BF79E9077AA28137514B
+:103350003DF42FF0BE4E0AEB52E9FC82FB24CF76FF
+:10336000C2DECFB2119295E8BF13E621E09EF7C30B
+:10337000E6347FD1F07C2C3F78A9E6765A9CB7E4FE
+:10338000CCAEEDF4FB790F59085186DBD31E719D4D
+:10339000DF7FCFB89A5C499FFADEB086E2EBFD1979
+:1033A000C4B39CB67B5F431A00FFEF73BC953F74B8
+:1033B000F7113285905FD9B5F89D49D083E4DBBD24
+:1033C00088E2B753224123D0C34C3DD2C36088D298
+:1033D000C395B0FE747DE8FBEE07278782747D06F7
+:1033E000C90091613E15C4BE5D89A9BFA300EB2948
+:1033F0009D044DB43EDA680E6D95805E28A0A55000
+:103400003F09EB5F95D8FA07EF30E238DD33191D3D
+:1034100076373A43C11C00B68B00DEC6A2A3947671
+:1034200082744864EF9499B6617C6CE372C1523A3D
+:10343000F0E2DBB43FB2DAE4194F1FB0843294BB40
+:1034400052713C4A0FAB91BE640647FD8FD342AB2D
+:10345000705C4F39ACCBA336EF7C781FFD914501F2
+:10346000F83799C84A63097D4AA4C3E8A4EBC0E1D0
+:10347000215D4F13A083BB60008A877F6F386F5335
+:10348000E8FB9FD825840308CD584E481D61F5758B
+:10349000CB2CC7A429F0D4860D09F4DDCA1BBC03CC
+:1034A00082BE72D9D348FBF373BA22EBA336C08332
+:1034B0001FBE4B80FE3FB7295628D3EFA7C0F2D3DB
+:1034C000EF0B87BFFF39F07D19C0C7E0276D166588
+:1034D000BB348C1FF1FCB980AFEB696FEC78629C58
+:1034E000F87E8FD9BDFF07F045F11E4E74015EB422
+:1034F000B8AEF1F0BAF4D1C74DB47E5E9BD6B182BE
+:10350000E2D3BFD486F315F0DE951ABD8EE48DECC0
+:10351000FF94A5A55C86F92F65744F961928E26281
+:10352000F1A21F2E53D25D48A28735D228EFE5F0D5
+:1035300001807F5177CCF7F8DFBF1A62DB09BE212B
+:103540008A14073FA72B459261DDFC125B37BD3E15
+:103550003A0FE4563CDC029FFFC6E58DA08B787CD9
+:10356000FF1BE0BB6C24BE5DFA814CE8D7BFD48062
+:10357000788AEF9F90107EF7B489044D94EED64B75
+:1035800012D2EBFA072D21909B83A6E80EC067604C
+:10359000FF8DB8DEE71ACD0AA14D36EA19BF05F74F
+:1035A000DB181F170C1480DC3B47E7ECA5EB73EE30
+:1035B00037DA9EA0248020A4E537DAAD40FFE75E2D
+:1035C000BE89F5B3DCA2105A0E0086E9B881E07F0F
+:1035D000B6118A57699611C73FB1570A19A0BE8F15
+:1035E000E239465E9EA3FF36940CCB8D41A800388D
+:1035F000FA2C08079D69238EF75D335945C76FD1B3
+:10360000485E0DAD6F593229D4CEE031C6CAD51609
+:103610000DE9904A86F9BF4573BCE0DE225627A724
+:103620007079AC60BB431285B3C9B83AA205FA05FC
+:103630003EA0F54BA03E67781D5A567FF417984779
+:10364000CB1E357D343DAF9EC79258BACA19A61716
+:103650004B29C317A926A1F1145E1B2F5B6A2221F7
+:103660002DE063E93472E22ADAF4E0C074A0235B4F
+:10367000692FA9A3CFC069E20D51B8A7F6F7BC36F0
+:103680008EB677D4443261BA81A5BFCD3B79D5F0EF
+:103690003A0B38AFE97F424BAC381E7E4741F1EE22
+:1036A000B662BB89B3AE887DAEC0EF92354C2F0FAA
+:1036B000C02BE01F99E9CD755C6F52FD8AF27A61EB
+:1036C000D704D4AFA0FF40CE3D95C0F431C83D90A3
+:1036D000336D8EAAAB1C749E6667D51447191BC741
+:1036E0006783E927A1FE88A7EB783D24DAA5E6B534
+:1036F00016B75AC76E47F90CF116DD90C8E4882C4E
+:103700006179D1AF753DAB103E19E9E6DECD3928C0
+:10371000971B48971EE8BC8984F440C78B8C24987B
+:1037200040E962116D96489F8BD71B8812B37E8D3E
+:103730002175B989CB85BB4904BFBF7B675C7D35EB
+:1037400009DB687DB391842DF0EC55D7B7507D8EA1
+:103750007CD6F78521F63DE966F3BD8BAFBBA33A76
+:10376000A4F5D3796F3051DDEA84065DB83E5397F6
+:10377000F5E07A269678731E06BDF22B9D672BA581
+:10378000DB3FF0F512F83966AFAA00BC9BB51A9C76
+:103790007FF46103E2E724D5E3B0FE6B1DE4AE598C
+:1037A000F479AE8D78F37580267BD62CDB483CAF60
+:1037B0007AC5D40074D3E0D0A8E82AD3A1C372F9A3
+:1037C0000A8EFFE596D0D61C44F714A0A7F25CA1A0
+:1037D00057C99499B47C4C47ED3B5A6E9963F543B5
+:1037E0007F03604FD0F2FD0E26CFEE77E8713D45A6
+:1037F00059CC57D00D1D07FB335FC59E028E654324
+:10380000ED9F6074C3F5F0BA46730FEAE121FAD573
+:1038100010A4DF229F1EF0FA0A972BF3C16EA1F8C5
+:103820007E851214C88F602FB35F293EE62DA5E573
+:10383000574E1779562940674CDEBCF21D3359416B
+:10384000877CF3CC4F1FFB275A7FFEB45E31D0FA42
+:1038500005406B74FD5E918817C60BBE680881BE7B
+:103860006CD2337BB469FF15CC9ED1FB372C8471AD
+:103870005ED079C0DE694A083DB703EBD33C94A221
+:10388000C9AB3A86CFE0CB16F6BD39F4B39FBBA0E7
+:103890003ED513A4EDA326FF4658D7748392887AA9
+:1038A000F9D75AC2C6091738285E8F8798DD7D9CE4
+:1038B0005649304EBF0DFBA17C9AB690F673A233E9
+:1038C00015E743E52FDA5927D618B682FC5D373461
+:1038D000AE84ED8FEB7CD3D368F9F88BC59EE5B44D
+:1038E0006AD0A70FEB293D07D632BBAF5EA36C01B0
+:1038F000FC90FD169C87588FC09AC5B5501F58B2D2
+:10390000EC16908F63F139C87B122337CF9168167C
+:10391000F0D3C686DCDE30E895FE891E54AFC44D78
+:10392000179FD28D9DB53DA963F88DEED3213D5FE4
+:103930006EFF40177239D343304E80CA6522F80FAC
+:10394000E5724C593B5A99AD63E095546EDFA9EB93
+:103950005312FC47605D5A9EFC8FF7972A305E1425
+:10396000E522E94A46BE3CA9F3CE03BA755487F571
+:1039700075317AFDA483D999F5066E0792B03E960B
+:103980000F457D79959AEEC5F304A77F5B84C9F74F
+:1039900091F51ACE1FB71A408F4D6520936CD02336
+:1039A00056E85FC1FEA79E0EEBEB69397B5958BF05
+:1039B000883F814F28BEC3463AEF931B6C8CBF29CA
+:1039C0001AA09F451504F5E5222DB5634BE0BDD245
+:1039D0003740D7E5D48B0EA42FF2678A158AEFF90A
+:1039E00084B73350BB97CAB1973AA430EC0BE6AF1B
+:1039F000376C35E5005F7BB53658CFCD12CAB1F9CB
+:103A00001D95051B6879C99E2B70FD132A185D2E24
+:103A10000939502F4EE5F2B1DE10D2A31DFE3389D5
+:103A2000C03E88F68FF67413FD28AD64241E40AEA8
+:103A3000ABE8211453A6F6D1D45E26570995E724A6
+:103A4000C66E12F21EE43889B303D5F41114FA8855
+:103A5000C93DA2A482DC1372F998DD97E8443B3E8D
+:103A60003F15D697AE27939BBB25C46B3369457D25
+:103A700022F4C0D0B85C8F9CD20699BE323C81CF74
+:103A80007C670EAEEB12D28BFA44E895B1E820DFEA
+:103A9000A9E1FB88D1E960BC53C1FE9A4E93F07551
+:103AA00074BCA66524DC3C853D6D53503F323D69B6
+:103AB000647A129EE6CBD097F1FA315E1FC6EBC155
+:103AC000543DD377629D853D933A8DD901539785B7
+:103AD000B4A408FC35DEEA94E461BB26F08ED1A8DC
+:103AE0005C09651FC905F99E50F9622AAD0FC8C46B
+:103AF0000B7C65A178E9A1EF3773FBB72795CDD78C
+:103B0000AD67F4AB937DA4D80AEB12C17D6F3499F5
+:103B1000D8811E053E37DBE87725F01DE3B7A1EF1E
+:103B20008DA4C31CF37DD52B26D43F175EB6850C20
+:103B3000688FF8B31DB4BF94DF1BD04E3DF78A0DDC
+:103B4000F5E939AE0F5DC2EF401E617E16BEAE4193
+:103B500052358E00ED4B33C6810814F659B383D924
+:103B60005923ED215E9F1399C3E8CA80FBCD0B8ECC
+:103B70008107A04CE121A07F6E71327E0FEC995637
+:103B8000FC43FA3EE0B37A18F6FDC540AF06EDF708
+:103B9000E718297D4DD72E8B3E48E7D19C69B58328
+:103BA0007EABCEFED7DFDD41CB1FEED11103ACF3F0
+:103BB000F6697349EED8F2B731A43B3E10C32F77B4
+:103BC000EF54979B7BD5E5409FBA7CBFD3E63A651F
+:103BD00041D9E1F982D2B5C1D07ABA87C26B78D522
+:103BE00080FA6886D3FF9013E4AD267A18F06CC88B
+:103BF000FE780AF83B02FD9F48F03450368A1431B3
+:103C0000FC035F5F30CDCFB68F82B761FC11A30696
+:103C1000F14CAD75F6443917E07CE2D27B3F3C4075
+:103C2000E7BF6896D9BE02DF786BCBCAC19E441845
+:103C30004960FD4D1FC2BE8BB66B84F53F3593B610
+:103C4000A37035AC67FAB0894412806F5BA8DD6958
+:103C5000A44BFC1BCE6F777744CBC3F47FBB9D3561
+:103C600013014EF92FB20FE8E351E837C64EDEEAF2
+:103C70006472FC4BFB993246F899B602FE9A8D03AA
+:103C8000FA4A3AFEF57FF90CE5FDE2A5AFE13E8286
+:103C9000CE633EB3AB4D0AC8A7C50F1EC0F762DFA7
+:103CA000762AD38AFBB6D7361858D9A1C7F2A9CD40
+:103CB0006C5FB9B8570AC13CA55917932A412F6CBC
+:103CC000D6D90D64245EE3F1F8C1A6B713C0EFF5B1
+:103CD00001221DF67B12B3C7ECAD09B87F505A1311
+:103CE000C0BE0CACBFF143908F8B376B3D602F9003
+:103CF0007D36F4CF2CDE7CC3C48556E8E7D3A44AD6
+:103D0000F0136DB9013C54D0CE17627E9EC8F5F415
+:103D1000BDBCE56A05F8F1D06606FF62877107D081
+:103D2000D1F57FD1227FC91AE2073BB95BEF9D082D
+:103D30007CAD6CDA3E1DD6E78399E91A6CBF4B2245
+:103D400076C08B63690ABC5F2CC93EE0E386F58DC3
+:103D5000B5B1764F9D93F9C72AB397A50C5891AF8B
+:103D6000E6803E6DDE4CF908C69FF5DEEFEE700D85
+:103D7000F395346BFD2D53A1FF67751EE0BB217BCE
+:103D800066D3B790BEE02F4CF1B598E3EBABF29958
+:103D9000C122F8A4B500E4EAE215AD05F651EC8CB9
+:103DA000213ED944F9723221A79D12F902FC9319E0
+:103DB0004ED5BE63AC7D9AB550837AC6E821DEED60
+:103DC000F4994AB7C9B01FB725C9586F4BD2237DA4
+:103DD000CB7FBA77E76FE8BC9E74FA2F80BECC2603
+:103DE000DE62D06B4AD45E45CD5A4035DA61641349
+:103DF000B3AF89CCFC85EB92C98E5531FB7353125E
+:103E0000DB4F5039F105F473EEDD3F1F06FCB6645D
+:103E10007D3C05EC85C0C5CFF4E05FB3F64B28DFF1
+:103E2000AD1E1F01BA09F4CF240B8A86E572C0C308
+:103E3000F446FCBCE624E9981C7545B19F4A97827C
+:103E4000E56E07417ADAB8D48CF6FE4657C80440CE
+:103E5000FFAD7C2BECA746EE0F346EFB85570B7441
+:103E60001E92ECE3A1AC30FE186C9817D2D2713ED2
+:103E7000DC9617C4F29E4A8F96D659B7FDE3CA5C0A
+:103E8000C0539FCE03EDAD9E810498DF87DB4E24A7
+:103E9000C0FC1AB66971DE0DA14F5216160DCB0982
+:103EA0009DC65F900476825DB2C2F8425E7CB8ED3A
+:103EB000D3940556E63F407D5A3A3A5ECCCECAC905
+:103EC000F0FDF5DF64EB726697210472F08C89F9DE
+:103ED000F745BB3336A6FFAE4B12FECDDE2CD03FEE
+:103EE000436579A206E4C4F7ED6CFE2E7D6F16F0F3
+:103EF000E54792BA9F252BB52444E552E34A8984CD
+:103F0000A8CC3FF3DC4B5920FF3FDCFE52565D0C42
+:103F10007CF1DF89E78D496A7F9AF0AFBAF4E10C52
+:103F200018AFCE63607ECC31FCABA23D59CFFCA470
+:103F300083946B810EC577830D662FD8BB83C4181D
+:103F400002975B5D3FF7D77ABDF92ED8D788EFE3AC
+:103F5000FA5F0DF444E192FA24F427588AA2289FCC
+:103F6000BFB4FC77D1F58C91FF749D8DB04ECDC65A
+:103F7000E8E17104E9430F78D3B75865D05729EDCC
+:103F80008CBEA2F76B709FE532274C81B8803EDD76
+:103F90006D05F9767D81B9439308EFB342D03E3386
+:103FA000BD10BF0B5631FA0FA610F4C3A5915609E8
+:103FB000FDB476E6E7CFA820F655B4F8B32466E75B
+:103FC000B88967BD360FD75FC23807C78BD00F409F
+:103FD00047202FCF4846A423A95F427B54ABE99DDD
+:103FE00007FD8E45572BC5BA72BA1A2AFF9DE8EA1B
+:103FF0004941C723E8CAAF205DB98DA3D315F72384
+:104000005F767B12F4C1BE3695E36B2D973FD1FBF3
+:104010008DC2AF2EC17C6B797FB5466B580B7AC4CD
+:10402000A3FB38D63FBC89DAC5B07F4A03BB9E3EAE
+:10403000C7B5CF5770DD486400FC0896AB8DA82F3C
+:104040001FD34472C08E499DD4BA1BE823755E51BC
+:10405000493BEE0B331CA01740D7A27F74E9341FF5
+:10406000B323581C283A538FFB9C96072B7DCC8E8C
+:10407000A8417E09AC3629A007A7F5E72C07FA0866
+:104080002C231E03D271CF8645E0CF9D6DF580AC09
+:1040900013F125B252CD779D128B53056F22180F65
+:1040A0001B8E330D6CF921E8FFC622F49B0CF98FAF
+:1040B000F309EA8DCB8D43D6AD3621DE45FC68D0C1
+:1040C00046117425FA91B13F9268647A68A47C40E5
+:1040D000FF734A05117FEBA19C2ECA3CDE23F85FDB
+:1040E000C4A36C45BE1CB0C82B9C39BF32439C0492
+:1040F000FC776CB31684FD00FA8D5919DDCA4F693F
+:104100002820E950FB9FABAA3362CABCFDD0F7C19F
+:104110005537575F8BFA77A81EC0A67A5994BD26EB
+:1041200005E255C3F532B5838D7D12FFBEE2E61B75
+:10413000A8AA1E94C4F87FEEF4821FD14454E3C5AC
+:10414000C227C7F5AFA3FD5B15DE3E38EE26E8EFCC
+:10415000A912517EA0D34BE15BAB53F78728E5DF73
+:1041600043418CF77F530EAF5A9D316C1F507BE15A
+:10417000CF4965C376C2A3EFD5765D49C7B2D83FB4
+:10418000D583FE15FA3EE092D00E89E7D70497F466
+:10419000D5EC6B65847D9DE062F6F5746049BA2FBD
+:1041A00041F91D58E62360DF52BBC4E942BBE4E39A
+:1041B000530768FDB9599F1F1EA740BB7BE6C1BED0
+:1041C0002A705146F91BD8A90D49946F8CFDCCAECD
+:1041D000A6FA1CE305827E96D839FD388204FC9746
+:1041E000DDFBA432A077425AB36EA36BF903973775
+:1041F00013C7E1FBCDF87997BB985F205058B5A164
+:1042000000FADF2611B01756151E4F5980FBA9631F
+:10421000290B63BE6BEC7B0AF1D9B853372A1ECB4E
+:10422000A9E104786C79F9452FC88D3321096542DD
+:10423000831CEA04BBB6A141031621290DCDBF039F
+:10424000E31F73F5643C9D5F06D777819DB706A792
+:10425000C2BCE9BF127DB5D1B708E5C4C6B9462BCB
+:10426000C6910AEBEE413CD8CD5EC0C3AAC2AA34C7
+:1042700018A765E6743BC64DA83D07F52D0F7E07D0
+:10428000FD4502AE557DBA1AB077CAA95DF70B0A93
+:1042900077A673468D87F2F538EDEEE2FBAC10574A
+:1042A0001F5D8EFFBF6446171D922FF8ED52F48FED
+:1042B00092587F67761FB31F6F71E955FEF15B5C03
+:1042C000CCAEBD36189906E4B25F1EB0805D1D20ED
+:1042D000DE4F605F4D7C56653BAE13935FAE360597
+:1042E000FD6646D7C0635742FDB532EE67883CF0A5
+:1042F0006318F75CA7CBB38A703E80F283452190A8
+:10430000C7FB5CFEEFC2FA96737BF5DCCB371683F6
+:104310007F51D85F9DCF99506F76DA94276B404ECE
+:10432000FE49667903C668641AED67C9E74E1CB793
+:10433000D314EA84F50FF668B1BEC9EA5F04F4DB72
+:1043400078EBFA299887600D15801ED5B9BA08D088
+:1043500031DDBEA01FC5E8F21188234F0BCE972593
+:10436000D0177176CD34F063E1BEC5857EDC2ACEF0
+:104370001FE329159C32222B747C91346CE7BCF925
+:10438000E7D932BC14F68FC6C8FCEED573CD04EC69
+:104390005CF248F4B006FCF8AE08017BB8B957C22D
+:1043A000719A0B5FD0C3FEE5EE5EC6DF01BEDFA0F3
+:1043B000F8CBC27894CBC2ED810E46672472781C8C
+:1043C000E0F979B69E84D076317E5742963379C033
+:1043D000FBD3F3F84333F737514D88F5AB5CC2CECE
+:1043E00058A18E5BF071D74911AF16F05A2CA9FC79
+:1043F000E4E2D9C3BF4F3C189D0EFC1BA5F4057E1B
+:10440000A70DD2CC7B5EA7F3DB5036C903A6989BE1
+:104410009293B604DE5352A4782FEDFB643AD00D8C
+:10442000A921C8AF2D7D95DA662B8BEB605E8CA53C
+:10443000B507EA53EF2A44FD0C719359F4FDB31C00
+:10444000AF6956E6C773AF08E6401C34F1A0EF9E93
+:10445000D761FC2BCCE8874DA56B6373E27325F81D
+:10446000BDDCA4F800E86777AD5202F088781FC47D
+:104470000B67160DE7E3383D92772B7DEE76399882
+:10448000DFCE406A005E781FB20EC71FC19F07E3F0
+:10449000427C0F9EE7D2C232FAFFC9C096EDB8EF58
+:1044A00037603E486DDF1BEF80FEAD35925E8CC7F6
+:1044B000C6D92DD589B7BE02F43F78F6D4968701C8
+:1044C000AEDBF67A30EF25CE1EB9FE9BCC3E3FB375
+:1044D000DDA2003F6CE5729BDA8FC827C15D6C3F9F
+:1044E000196F471E75A9F72743E5AFDD8E64F00508
+:1044F000B7B33C0B21DF037CFF37D8703E01F4D704
+:10450000BF0DC113970FB28DE783F48F9E0FF2E6B4
+:104510000E4B10E8E17CAF09FD92328F7B9DB545D3
+:104520001F002475380ECF01791B5872E6E71ACAAE
+:104530007F720F8B23C9128F33FD4A4B585CCC6BB3
+:1045400007FF8B805B764C777B8B403EB27937716F
+:10455000BF5193B34061F12E9637D494102E007B57
+:10456000EA55AE879ACC2C5E35E8D087615DA326EC
+:10457000FF1F5D18D762DF935F1A94D8B8564F8833
+:10458000D975270A35613D9D670FD807B06EAB59C5
+:104590007C6B289F60BFA1C7C0E290581EECCC4145
+:1045A00039592FE256FB993FAE9EC7A74ECC5AF41D
+:1045B0000CA45C7448AD35B03FBBB0AA12FDE80F47
+:1045C0003C39139FF52BD57EFF45E0A7CF1B8E23EB
+:1045D0000BFF7B1DF1E899BD3CEC47D450FB4559DE
+:1045E000295781BECC21F61520FF95205DADABE9A2
+:1045F000B3833EC168973412D83972A7CB0CEBFB5A
+:10460000688706F554B043E3857602CF39C9CC8F6D
+:10461000744D32F36BD0A50AC138E2D9A1E371071A
+:10462000DEDF72A209C35323B1E7A376B966347DF6
+:104630002DFAEBD0B51AC14F17CDD4A0DFFB82DE27
+:104640003B17FDC6CE020279541DB6D69535AC1E79
+:1046500079E78229EAC3FAEB64664812C509F233A6
+:104660003599E7CBC5E16D6197BA1C1F8F690CA91D
+:10467000CBF5C43F212D8FC50F62DFA72633F97517
+:1046800061550EC7B707F3E3C4FC976730BC6932C6
+:10469000D93337B36A2ED0412EC49773E0C9FCAB2F
+:1046A0007426087FEE752E09E9230EDE0E30DA80BF
+:1046B000BE3A593CF46F853F1EEECAE414AE1FBCEF
+:1046C0006E885FD6DBF5188FBE5C3F495DB25A0E2F
+:1046D0000D95BFFEFD2CDB27756A799E8D1DE5507B
+:1046E0009D9DCDE584E4D91186F7566A2FC03C3AEA
+:1046F000B525603F4CBBD58AF368D96F423F70F354
+:10470000B2812CD0E32D55030510B789C72F402B5C
+:104710000BF945DBD5B9E8FE03EC84D8763C5F4B5A
+:104720001D67F5FE20B90CF6392776BF01FA6AB786
+:1047300009F515FDBF0306F0B3BC9C83F6CC8736A4
+:104740007F1BB40B98C35B9ECD01BB85D94DCDFDBE
+:10475000861EB00BEB3A62E27CF09FD5EAB81F5997
+:10476000E944FF3BE956BF6FD814F7DD883860177E
+:10477000AEF33ABD7F22F03BD53B987F70B65183B4
+:104780007903F55ACF2290B7674D6A7BFCAC8DADAB
+:10479000D796A175F6A0BDB565CC75F614C03AD70D
+:1047A0006B883FB69F665867BABE4D7C9DCFBE787A
+:1047B0007501ACF3C7BBAF2E80755EA7EBF202DFCD
+:1047C000B439FC5B9369BF276FF0A13D25F2582FE8
+:1047D000971EF724ABFD2B43E5FF21FFCA58FA30A3
+:1047E0003C04875A1FBAF44A06C8833AA3E1BFD5EE
+:1047F0008BF037AA1FCF68407FC7FE3F7FBA66079E
+:10480000C8817E2DDA23A2BFFDB23F0FECA1FDEFE0
+:10481000B83D4169ECFE1BB95FD86D2441F0AB880F
+:104820007D80B027E3E5F15B7C3E1F257B6F00BBFD
+:10483000E6CBFA8D1BF83B63E85366E76E933CCCFE
+:104840006FDC8B7EE4967DF3EDE0273E1D627EE318
+:1048500096178BD16FDC187A2D0C7965A45FB2C3E3
+:10486000FEA371DBB104C80710FB5CBAAF3D938CAB
+:10487000F4A8DEEF9E0E9D4880FC010A7725E871C2
+:104880008B2BAA07BA6FA1FB3DC8236C91A387A10C
+:10489000DF1617C13C97D23EF5FE4FC47937FAF4C4
+:1048A000287737F64B2190D7297A7F4E06E8359244
+:1048B00061C77820E7B38BC9DED494B2D8F8BAF7D1
+:1048C000F3E4E4E17CB0810D8948BF033AE2B583AB
+:1048D0003CDB60E3F24C46F9F6C74D8E10CB0F631C
+:1048E000EDFF18627642A3C80B934958A6EBB56852
+:1048F000B6F75D586F90F7E138791F5B1671FBBB17
+:104900004918F552331918CA0F8B6D171FD78778BE
+:10491000B8AA1FD25AAC801FEC4EAB07E081F8B8A2
+:10492000BA3EC8F6EB941F96960CD3AF580741BF1A
+:104930002DDC0F1D6838FE08D06FA04FB2837DD7E5
+:10494000E461F4DB44F75B90471BCFEFA4579D373E
+:104950003A16FF97A6A8F5D150F9EFE45FBD3E45A2
+:10496000CDF762FEC26F3F34CF7E89F165DCBCE2D9
+:10497000F7A9F1FE76B1CFBC5C793827452D0F87BA
+:10498000CA7F67795837B42EF1F2501DCFF89BE5F6
+:10499000E1FF705CE3997D4F27C0BE03EC78D8A798
+:1049A000ACDCAE63F91314FDB1F1E2E95AAB97C583
+:1049B0004FB5A25E1D8757A6F3383CE3EBD75ED414
+:1049C000E2BA35F33871F33E9B079A365817639C69
+:1049D000363E7EBA84EC9E0E4B151F476D027ECE8E
+:1049E000BB743C75750A8B8F525872206F213E6FD5
+:1049F000EB35EBA749FE9875AF2AA21B8251E8DB85
+:104A000028078933E6FDC6146657BFC6F38BDC7AE8
+:104A1000768E60ADCDE285FD8C5BC3F29F7EE0F2C9
+:104A20006D82BC18A3C2F1FAF2ED4443F1F28CAEF0
+:104A300017E54AB0D9EA013928FC37A2FF8B3C5E62
+:104A400071D9FA3F8EDEF7FC0FD37B3C7EF68BF1FB
+:104A5000FED6B8DD7A8A1B155F10A4E323105FCA67
+:104A60001949BF63F533161D1F4DF11D496176FECF
+:104A700014CC57B84C3963298D9E003F11D963502F
+:104A8000C0AF097E12D48FABD3783EAAA77C26E6AE
+:104A900069B37325E21CCE5876E40743EBC3ECC838
+:104AA0000FC65C9F2F6747DEEEF07D087476B2D2AA
+:104AB0008BE7011EB551F8617FF89C61D4732EE23B
+:104AC0003CC6A5FC2D5FC4D1D517FF4B72D4923ADA
+:104AD000965DF975CBD1CF13C07F3A763F419EFFEB
+:104AE0001941BC45F749646B8C5F3B1061F97B1938
+:104AF0001C5EF1FE3FF8BEA121D59B994ADF7FFCE9
+:104B0000AED14812A99E2E6572B1C567C5B8424B99
+:104B10002FCB7F695946508EB780DFB408FC8933AC
+:104B200009D87D4F3AFD13208FEED1F7AC416D22AD
+:104B3000F8DB6711B0F3CEBDCBCA339CFEC99867D2
+:104B4000B76C00E318DDB3CE601E56F9179F3E52D6
+:104B5000538AF0A23FC165509F67B93D95C933F1B3
+:104B60009C3D846F2FFAF33F6E60F9DA0197D70E00
+:104B70007E09E10FB728118C2BB4EC61C65BB996A6
+:104B8000CD87FC3003E9A9654F6531F84D49AFA9E0
+:104B900018ECDDF2DF5B71DFF7F183E99827B1CF25
+:104BA000E5AF027CD84A4337817D9A4DC701BBF7F8
+:104BB000E3DD371503DC42FEAD03BF391D7F9D4D9C
+:104BC000ED1727469677BF644726EE339BACFE5A17
+:104BD00098FF3A138323B89D9F4FE1FEF278FE17AA
+:104BE0007C9FAAD5E038A9DF35629C5CC885753A00
+:104BF000E237E60DCB93129E671870F13CC7FE9921
+:104C00002C4F8597AD2E75BEE747C93794003C25DC
+:104C1000A9F2578B675947E40B94A4B27896EA5CE3
+:104C2000A2E522B3A773ED7AA427DB4AC2E254942B
+:104C30009EC0AEBF361A9906E7BCF2BBC3D7029E30
+:104C4000F75FD4209EE49947303E9328B1F1F256A5
+:104C50000F744E007F8CFDADEB6049952E7B15A047
+:104C6000F449A7EF8154E4FFD64218AFEA5F742CF1
+:104C7000BF729F05FD0CDD594D985F79EE3D83EACB
+:104C80007C4EFC334856603E656EDF6F314E60DB14
+:104C9000238D9A27FB44AA15F9A62518998E393633
+:104CA000D7BA50CECAFB7E1F04BB43EE944102919B
+:104CB0000E9D5703E7D382CB09FAF5C777DB35B0F2
+:104CC0005ED93C3F6670FF7F4EF1E3BE45C40542AE
+:104CD0002CBF4937F008ECC7E4E503DF0CC27AECDF
+:104CE00071685AC07FAA8BB6A0DF659F05FDACD95D
+:104CF0007D792BBE41CBD92BED18071B7CE5EE6CE3
+:104D0000CCE7A7F31C3FCA3C1F4A65F948F23E8B2B
+:104D100006F499FC04F1C0A8B223A50AE17E8A96A4
+:104D2000693FDF077A4A1E8E9B823F0AF45443AAEA
+:104D30007F07D0CDD0B9A4A566762E899FA7B52DC3
+:104D40007D6F179CF7D9C2FDB907F74F9E85FEBF4F
+:104D50004E598275B8E060F9952FA4B278E248FC0C
+:104D60001FC43CD6DC7DBF657A8DE202FA97758C54
+:104D70005EE44E570FF8195F49F063DEEE751D6172
+:104D80002DC6CDEC277F5CA3C4EC77D6333DD3B2E0
+:104D900093EDCFE3F73797D22FBF1E92334CBF0C62
+:104DA00095FF4E76CBEFE2F4CADFBC6F21EAFD5EE1
+:104DB000BCFD12BFBF1B618FC7F537961D23F25094
+:104DC000AA86C761F6B44DD84941559E4E95959F28
+:104DD0003B34AAFB5F9F64477A10793B29EDCA7286
+:104DE000C8DB8FFE88A0DF4EE415893CA26015CB9E
+:104DF000F7096A8C782ED14DBA307F681C094B12A6
+:104E0000FAD706F0FC6D2AE411D1EF4FA4E662FF59
+:104E10009B8967A516E5A62201FC26C83F4902B872
+:104E2000431B16C178B759713C13E49F24E13E033C
+:104E3000F939DDC7F256A735B0B8433AD5CF504E51
+:104E4000CF6774699AABC73C56915722F24F045E04
+:104E5000AA38BED3272CCA01B928F254D6993DE509
+:104E60006017C1396838BF1C6C34F3BC13D66F7738
+:104E7000632E9E4FFEB27929F17816F929FA447F04
+:104E8000A6BB6CE43967413731EB89706DDCC7EC48
+:104E9000FCAA063DCE63B07106FA2B071B3504EC65
+:104EA00081AA7E03A3C3B8F136CED59330F42B8705
+:104EB0004C204F053D5CCACEA5EB5B08FEE0836D40
+:104EC0003BF34E52DE3FD4D68BCF4193D4ABBD12D1
+:104ED000CFA1CE03C9F58DB4FC5AF91AC8B78966BB
+:104EE0004994846AD3AFFA964CF5C46072F47D2875
+:104EF000DFBEE17BAC3C3EBA45A2ED9BD33E62ED0A
+:104F00008136D3A9D85EFFEFB541EB57D07F7F261E
+:104F1000F1F91C35EE64F4EB3C12413F12D77FA54A
+:104F20004C3EBAAD7AB49FDC3C1F9554F3FC5488D8
+:104F3000F8D0727B5A31C6EFAD44D91381FA0C0315
+:104F4000B32708E387F6F1CC6F6DE4F4403284BFF9
+:104F50006A2008F2AE3DC781DF0FC9E73D8610F336
+:104F60009BB1F18FBE78059E4B1279B684D833671A
+:104F70005F81F936AAF25A133FA729DB33E1BC7BE4
+:104F8000BB8EDBC1BC7CC4E65F88F304BEA4F6DD47
+:104F9000D11B7E5004FC7476EF0FF341CEDDA8A741
+:104FA000FB8451E45A593A936B833AEB4A897EB7B2
+:104FB000C6E66F013A7CC7326F3A1C319A9B54A9FE
+:104FC0007700BCC1E7B480D7644E278ED90C3E472A
+:104FD000B54F823CD476131B37D92F7BF15C847F8D
+:104FE000B6741B85BB5D62F29B7E94887655A19258
+:104FF0000871C8267EEE55CBE58896CB917F6E1B57
+:10500000C897A9C1784DEF135AB0E77FCBE3E2BF51
+:10501000CD519F9FE87133B8C5739656B902E8CF5A
+:10502000A5AB3A524BE940ABF78470FD326D1837AF
+:105030003E602B770FD0EFA5EC1F95423E777BE6C5
+:105040008F4A21BEA7757ADCBE98728F9BD17F35BF
+:10505000B403BC595A4BC1EFFBB5F59748FB2BFA8B
+:10506000F2FD0DF56360703519A359706EFE59930A
+:105070007F3BACFF85F9C7302EFC40FAD1F721AF5A
+:10508000E3A88ED15D3093E7E393EE690994EE0EC9
+:10509000E739785E0A8BBF1E9EC0FCA8547EB1FC27
+:1050A000D18912E621D6CE66E7626F26918E01FA8B
+:1050B0003D3A5968FDF48A1CB47F6B799EC8F47739
+:1050C0007C09B07ED36F8FCA20F7C7B2E76E74EB4E
+:1050D0009481183EBE4951976F2E5497BFE5519762
+:1050E000BF5DF19709B16593D97B10E8F55589DF6C
+:1050F00047710DB1237FBAA420D85D935F4AE7E7DB
+:1051000089593EE54FF97EF1A50A82F5293B8D5B71
+:105110008D50CFFDEF5A5E3FD94D8CD94EC407EA72
+:10512000E9A8C4F3325D1893227BEFB1333F346DAD
+:10513000ABA7FDEC9DAF201FA75835E49BC0EBA5A6
+:1051400046B4C3045FB49B287D533C968F339A8149
+:10515000DEDB759EF5D097D66C50402F572618B1E0
+:105160006FED3FC8A8D7969B0CC44ECB071F376383
+:10517000B95C263EC823A120CE86E7519D27D40ADC
+:10518000F3A5ED60BEED0E1657D796EB51CFD37E4B
+:10519000715D0F3EA109119C7FA58CF9A61C66C10B
+:1051A0007774247CFF34E76BAD8684518EA5B37B86
+:1051B000390ED1FEA1DF83BFD2F6A0DFAE50B91306
+:1051C000EACF1B27E0B9A8C0D0792F5903C015DA60
+:1051D000B97CE867E7F2043F0BF942A55EBE2B8578
+:1051E000309014F80F053B05EC0482FB0011B7CC9E
+:1051F000348A7AD90BFDA60DB567E7E05278995647
+:1052000085352560A7BCF127A0C3B1E445611A9399
+:1052100013E229E4C516C3C3476AAF196D3D0AEF0F
+:10522000C7F20C9B9DADC7840CE04BAD794206E8FC
+:10523000CD768747F1C5940BE9766AAE13F045DB6E
+:10524000D1F2AD35C7F2E518FD5498C6E4006DE71C
+:105250004DA2F01E342919C0BFA38CDBCCC6B57C8F
+:10526000BDE3BAE9B8B4DD411B1D97B6DB663284F5
+:105270003509A38D5FA1C078971A97A21D913F832E
+:10528000AF03A59320F8C10EDA3448AF3378BEF2ED
+:10529000C164361E2954E7FFE49BE9F8985FA6CE67
+:1052A000F7B951DAD4017AFA6953C256A0CF373828
+:1052B000DD1CB6FC433ED8696FCC2B388472267156
+:1052C000790710D10CD28BF246C8C10B69C7CAA1AD
+:1052D0004CE5E18D6974DE0FE41E9D079D1F723C55
+:1052E0009D8FF6A5D95B935636127E419F026EA024
+:1052F00053E08B213A8D835FD01BB9A51713253757
+:10530000533B179EC2EE25A495E5C52B99C3F3A385
+:10531000443EDDD8CAE6D11844B86F74FC18F3E6F1
+:10532000EE18E7FF1EC035F7CA4FF0BE22E29E3FDF
+:1053300001F67714DE7969C9FF7BF0C6DBF997CAFD
+:105340000F1F8BCFC5F8D2AC9D981F1E986DC57CE2
+:10535000F1693C3F36D0A0C1B800DD0FE23EA28526
+:1053600018432097A772BB5C9C5B784562FED6E031
+:105370008B06457D3F517CDEB88279E9C1652CBF43
+:105380007CC87E6F56D07E1FD273FC9C44773193CD
+:10539000EDDDF728EAFB89E613F5FD440BED2171FD
+:1053A0006F8A94329CBFDFDD4390FEBB6DB9589F7E
+:1053B000AE65FA887C83E9A3EE1CA2BA1F699D3909
+:1053C0003411F394785EC146C83FF86FF20B7E9AB1
+:1053D00026A9FCC243E5AFC92FDCE6F0EF023A5B39
+:1053E00058E4CD92283DD6EB997F98D2EBA6088160
+:1053F00074C5D67CD8A7DD445ADFD2E421BDFE02B5
+:10540000E97532A5D73C15BDEE61FC1544212DE8A8
+:1054100075884E0BE3F300FDFB60DC6E47EFEF5B3E
+:10542000605FD36FF0B03C6896D7192F1F62E059C8
+:105430002033785C5A2DC2F33AF4130FCFE5F04DC8
+:105440002C9DA612C61F63F14FAA4C82B69261FE34
+:105450003199FD6FC1B8437CF408DBCF8E805B6B64
+:10546000457A9A73078B7F052CCC2E8038581A1DED
+:105470007F261F7F4EA7AFDA01ED664A0C0F61FA57
+:105480000F857F16AF9FD9DF8C7970B3AA75C7637C
+:10549000ED20212F45DC6D2E6F7FAB7DA60EF2D265
+:1054A00067D7AAE35D73EF64F1B639B3D5FDCC25B8
+:1054B000AB3FC17C4DD2AA03FCCDBD535DFF49DAA1
+:1054C000509C6C02C4C90E713FD020E513E0A3D7F5
+:1054D00093176FBA87D2F9849F149580DFF0869472
+:1054E000C66D4FD0F2B31B2761F9F594EF7EFF280C
+:1054F000D46F29C072355CE204FB56E043CA67856D
+:10550000E577CCC849007DC2FBBD87E07BB7D9DF1A
+:105510003D93B6734FC9C53CD66AEED7185CC8EA4E
+:105520006FBED2C65295EF52D05F5C6D66F7351DE7
+:10553000297EBB04F2AAAB7379B9E4D549503E2465
+:105540007D82F73A9C6BB6CAB00E2DE9CCCF3EB93E
+:10555000500A4FA478A976F2FE9BD9BC6A4B9E4BA9
+:10556000073EA9AE62FD4CF65476E6413BCD792C60
+:105570009F4B372600FE05BFE5F07D95B02B7D5C87
+:105580004EBCE43DD69144FBF519250F4CD1577123
+:105590008CDD4B6665E7037DDE1C19FCF4D3BC2C67
+:1055A000EFB6CAB83C0DE4E12D7E7D29CCCB6E2C44
+:1055B0003E0479118915956598A76D24B8BE94FEAF
+:1055C000C7A7033F5EFD495602109D554DFF82BEA1
+:1055D000660ABAAF56D337E5DBC9E9659796DF2A85
+:1055E000FA360DD3F758F63E85AB02E1FA865AAF8C
+:1055F0000D8D13C79FF1E38E2537E02F56FE0EC3A6
+:10560000D78B7C9801D98D79C0A75D824F6F023806
+:10561000F49A089E8FCA963C93F0807185C7887A69
+:105620002F8E5F057C99E0332F190917FCC9C26ED4
+:10563000657F2EF0A364F07AFA9D973887E1A2E3A4
+:10564000DF910E7AFC1106CF66A995C919BE2F11FC
+:10565000FE971631DF3EF57CCBCDEC1E0337F8CB41
+:105660003076523C6908EECB5807319F00D7E7B33C
+:105670008D3E9B9ECEED36473DD2CFED54A33A28CA
+:105680005EC274FF0F701ED404F7C17E6F21F162F9
+:10569000FC9CD247203DC66E12F0C6E3A9650CB94A
+:1056A0001A3F9F78FC0CAF5B240D9EE2FCE1D07C9E
+:1056B0002F739EF1F68A4BAFF65B3AB97FD139EC86
+:1056C0004F2C84FA5A62F6A03FD123E17EAF96DADE
+:1056D0001F20A76B6B08FA719C560DFA13851D32BB
+:1056E000169F5CFF4D26B76A9B083FF7C8E6174F29
+:1056F0008FA964E07E78D61A950D0B80FF1BACAAAB
+:105700007306B556168F784EC8113250067A7FA8A8
+:105710003C42EF0F94811C8ABF7FAEF622F37B3BA5
+:105720002F4AF8ACF51C2B03BDEFAC1928037956B2
+:1057300067F7FE14D655DC13198FCFBDE91A919780
+:105740007259741ACF47220E7AC4E67F393DC63F9C
+:1057500075568AA09F75B5CBCEE7E7CF017A76D88C
+:10576000732AC1EF34DBD8AA03BB38D1E13F90CE16
+:10577000E4E8175FC0E6179A523CDE56ED7F5866A4
+:10578000C3221EEEE578B881EBD9F39BB4B80FA91C
+:10579000F6163E0DA1A0C09B3A1242BEF5A27E14A1
+:1057A000F7C69DA7065518DA3F6F437DBBF857F53E
+:1057B00018279BB05E4394187D39316456DD7F32E3
+:1057C00079A75355BEA2375DD5FECABE5C557D7123
+:1057D0007892AAFEAA374B54E5B2C85455FBABDF0A
+:1057E000A95295AF1998A16ABF03F43DC5E3374E9E
+:1057F000CF52BDFF68E3F437213E7D5DF43BAAEF55
+:105800004F703F04097A238574FE0B04BD5EAC53D0
+:105810007D4FCD9AB0540E7CCFFE16AC6679F795CD
+:105820001463B1FD2DEC52DB13379028E62BB684C0
+:10583000244F9840DE9DBABEB1AF07F17AA97B0F25
+:1058400026B8E66BC05497C6513B632220825C0D9C
+:10585000798363F1FBA5D6BF80E47FA9F537B8D57E
+:10586000EB6F52D4EB6F2954AFBFCDA35EFFC40AD8
+:10587000F5FA3BBCEAF54FAA51AF7FB24FBDFEA986
+:1058800073D5EB9FE657AFFFB806F5BA67B6AAD750
+:105890003B7BA97A5D73824B54F5F17420E849C8CB
+:1058A000CFBC95F7AADB53A46862E842D0D9025F67
+:1058B00003E6638DEF7A48355E3C7D4C203C8FF4E7
+:1058C0002BD247E5386E7F72BAA07AA96A5C32DAC9
+:1058D0001937C073EE046EFFFB46B73384FC8AD5DC
+:1058E000EBB1FBE6B1E4DA087DC5F7D163EA2BD86A
+:1058F000479B86F7D163D1EFBB84EA591C7C35FA0C
+:10590000CFEEB033380E9A993DFF29545D43DBD179
+:10591000361514DE77613E74FC77CD93D10FF21DFE
+:10592000D2AB8371EF24117CCE23517CFA895D7553
+:10593000BE6501F1E9B95F6409E0A9C938500E7A82
+:10594000FFC2FCA3EF637CEE48D265DD07721CE268
+:105950003FE30939C5E5C9498803D1F23913F7276F
+:105960007A89E28AC1E729EEF7AC9B26A19E255AE7
+:1059700033E6B1D5DD2EA19EAAFB0FF66C1FC7F44E
+:10598000DA88E75281D72E6E1F303BA10F0EDD6201
+:10599000FC90F8AD688F7AECB0DEB43F1687F9471B
+:1059A000767FB1DBC8E0DC2511B9C289C70671DD9D
+:1059B00061FDE17C9BDBC8E0DBA52346C0EF64E230
+:1059C00047FBF031998A3CD6EF24D6EFD15CF01733
+:1059D0009ACD6F7EAB1AF2A9E5E072F4DF7F8FA853
+:1059E000FDF777B64AE8BFFF1E859B3EDD768F1B2D
+:1059F000F4B228EF02B8211E00EDE8FB5477AB04A7
+:105A0000FEB1AFADBF3D0FB1765FB2BFA17E0883DF
+:105A10000BFE603D857F3683D2B781D2CBB6EF11C6
+:105A2000F41FC6FB6BC769A90681FC311DBB97C07B
+:105A30002DAF67FBE2C31EBBCACF44740E38477A52
+:105A4000297B0EF2BE4FC59CD3A07434EAFDBA1F69
+:105A500065B07CA4F6B6C844884B9EE371D787DB5B
+:105A6000DEC4B256F6605E26DCF7E588F95EEFA28A
+:105A7000F531724EB6D2EF63E48DCEEAC3CB6B1E26
+:105A8000698B60BC53C7EF257B34E35EBB3FC6BF69
+:105A9000F2CE386E271983C49E42B8694FFF4E4F2D
+:105AA00023403F5ABB7C2A761F6D70D3FE62F5EE11
+:105AB000C564121B7F58D9F60EC2FD88E4F7436710
+:105AC000867C1236517C1B6438034DDF6FB811E5BC
+:105AD000AFDE76AF07EEA11A0B7F06B77C21567EAC
+:105AE0007E388EDFCFC5E5E7936DD1C9304E7BDBC5
+:105AF000800A6F5D6D17F1FD9A3652C4EA3FC47A91
+:105B00004D8D82F4738AD24204E27AF2800DFCC198
+:105B1000D43E26107FD6B98D186F30B818BCE4A2D9
+:105B20000BE9639E9DC1003EBF4C4A1FEF2FD5E19C
+:105B3000FEFABE4C2BB6BFEF37E30F7829DFEA2918
+:105B40001AB47FC37C86C761F8D373F94964BF0F69
+:105B5000E4803E5DC63885D33E0BD7F1CBF627F007
+:105B6000AE3711CC47D6675AD15EB85C38DD196ABA
+:105B7000BCC7E38FE209E5FF7D1C4FF73DC8FC93EE
+:105B8000F7DD4FF03C05594AFFCA87E96A1C978741
+:105B9000A9C487CFAE362A080DB05E46E29F40ED1D
+:105BA00011D28B8D4DE0A7827AAFEC80D48827AAE2
+:105BB0005D33E1B9A6E26417B0E3DA6B3F8BC01343
+:105BC0006211802F7B0309C155BC98AB40C777F8A1
+:105BD000593981D727CC65E5445E9FE863E54CEFF2
+:105BE0000B523500161747CBB43A6FCA0779BC8001
+:105BF000B073F1FC7E8DCD84CB0BAB736635D4DFF7
+:105C000049F09C8BA8FF09AF4FB31E5F99077A63D9
+:105C1000B6FAFB0D1C0FA9D6E35DD330DEA6AE1796
+:105C2000F1AC64EBF937F1FB2275FD53FC7B9BF57E
+:105C30007C641AD4E7ABC77F9CD75BAC2CEF8DCAD2
+:105C40007E767F03AF7F8CD79BA01EC62F64F55A4C
+:105C500071DF096FD7C9E118E2331E430C2633BF49
+:105C6000F2963623F2573CBFDD07F773950DF39B91
+:105C70007D2919F5DE86FB3298DC495006BCDE51E1
+:105C8000E4A2A877DA65CC37D0BAF5484F062B974F
+:105C9000279C1F87E489D4EA6144C6E4F4A5E89A06
+:105CA00012F005906B59F40FE83AE3FB1AE28F917A
+:105CB00073E94D66E28FE583054E5539E5CE74559F
+:105CC0007BD7EC5C55BDB57492AA9ECC76229FDC46
+:105CD000CBE9CB5C54A2AA17F765906DBC9D9DB52E
+:105CE000D3E54F55B53B5FA824028D9FBA49DCA38D
+:105CF000E631827CB8D7969B0AFCF8B3B60A444ECC
+:105D00003BE527F6B4F3A71B8C59FA5478B910CBAE
+:105D1000CF3B587E7F7B9B879573089EAF6F6FABA1
+:105D2000C1F22ECA9FF0FC699B179FDB6959A1CF76
+:105D30007FA4FD2BB49F1EDA3F949FA1FDC3733354
+:105D4000ED1F9E3FA1FD43FD06DA2F949FA670C173
+:105D5000F329DA0FBCFF31ED1FCA4FB4F9B0BCB65E
+:105D60006D2E961F6FF3E3F3B1B6067CDFD9D68AAA
+:105D7000E547DB96E2F3E1B6203EDBDB56627D2FA2
+:105D8000A793E7F979DCE72BD9BD03F1EBDF9F217E
+:105D900061BB2F9D9F534A157AB92A3FA73F03FC49
+:105DA00002BDEAFC54C01FC26162788C87E36806BA
+:105DB000B30F2791C8720B931F18071FDFE75961B4
+:105DC000A1FC35AE95AD7B4E5F14EBD31AD8784766
+:105DD000B99D405C419251CE8E9B43BB7352A4CA85
+:105DE000C2F207D00F43DC143FE5EC5A7246E621BD
+:105DF0000DC02557503D1E33AF217C39189C80B70C
+:105E0000D1E0FD578E376D692FBB5FA7A62B0C6CB9
+:105E100066F6B6E2FD3AC6B9BEB04C9F2E9F1FEFA4
+:105E2000E99874713ADD2452F976F19B44A1CF8C44
+:105E300026F5FE317D41896A7FA6BDB8862857D1F7
+:105E40007E8BD4FB3C73FEBDAAEF8C190FA9EAF53B
+:105E5000AE15AAFABABB731E71033EC7B1B89961F9
+:105E6000F5720221E485DD4F205CE64C368F73929B
+:105E7000C27E5F6037FF3D13BE7F79D6CEF1655C91
+:105E80008DFBF2090E562C480C6A400F7DFC8B44AA
+:105E9000947F3B9ED1A09F7E22096940DE4CA6E6FE
+:105EA00024D45F01378C6BF1AA262D948B89A285AF
+:105EB000F255248AFB3ABA7FD164D2F56BD1FA9FAE
+:105EC00031D1F2D94CFFB32CBF308CFABA80AF6716
+:105ED00081D8C7AD97E3FDDCC64CF437A9CF257652
+:105EE000F0FD4B8789F90D973BCA53C10E3E3746EB
+:105EF0003EA8CD7DE28D0514DFB6B463F814EF1F24
+:105F00005734A39ED7CFCB94BE5A5EF77AAA4FD40C
+:105F10007C9307F3385BFACF29E0766BC98F22FFB9
+:105F200074E8843C5312419E0D973D8924661E3BC4
+:105F3000DADEC9935121FA116F325F37315FF94FC1
+:105F40009576C84B2CE079D13BDBD2F2ABC70F7F03
+:105F5000EFE37450482235A05F0B8B349E1074E041
+:105F6000B5ABFC31A6FC2E2F9C0B934B8807C4F2DB
+:105F700044D285F729C87FD5623E9A7CF01AA25098
+:105F8000FBD86A0D9360D170BF84FB75BECFE5FC72
+:105F900067F66A9C8F9C25EC260FE874F299D51B56
+:105FA000013AFCAC5BC7D8F4B8BABED04A50EF2D6A
+:105FB0002AD4871409EECBEBC27B40E52D12C9C869
+:105FC0000138A6B9E7837EDF6B413AB6AC2FC79F95
+:105FD00030B859E3AF40FC0E287B35C2E8A2ED9AF9
+:105FE00027EBB7823D3901F06205BCDC915F0D43C0
+:105FF000E717221E17F2792FE4F3E8C81CC23F838B
+:106000008778BC701FEFA26EE18F52CFF3F1D2AA56
+:106010006FC3BDA2ED112DFF9922353E57E92253E2
+:10602000E64BC37051381766825C01B8AF820FD857
+:10603000FC9A9F91C8C61C946B35686F9469303F79
+:106040003D9E2E9B3299DC8F66D8D97DE4EE534875
+:10605000CFC3E5936F2C48C2FD33B35B6C32CB8F5B
+:10606000F47A9558BFF72AE15FE4E772CC1CDEA111
+:106070007B0527B1BC602B89AC87BCB4B1F6F52B8E
+:10608000327370DCE17D3DB55D203FA5CC88795C45
+:10609000AB443EA172549969634F385765E474FA72
+:1060A000A84D9DF7B39DCF6F3B5F8F41A3C87BF297
+:1060B000D616C79CF3A9EBAF473F9688D30E72FF65
+:1060C000E1A0591D576DE4A43078A8ABCA0CF1C10A
+:1060D0002E16A76DECBF99DD6BBBEFC7782F30EDA7
+:1060E00053017AA8E7EDEB57AAFD580B77FA915FB9
+:1060F000E3FD64F17E318A393DEC1FE3FD625B33E1
+:10610000F97EC2438A210E7B6275DE6133EC7772C1
+:10611000089E0F1FA77D01EFDDA6BB812EB84F970C
+:1061200014B1FBA3E2D7FF54961EF1B253ACEF7843
+:106130002BDAA53BCB981CD879E0FC2DE3693F2BEB
+:106140007324D5F98095393A5CA7B7297DC3B397F5
+:10615000909AD1EE293B94A9F96A72EF5AF5EFC1F2
+:1061600034F70D1CB62828FF5E03BA1F3CFC7942A9
+:1061700011F251147FBFC408C23099C10DE7B37644
+:106180006B3E99174B0F6F67CA58FF36A78B2F0DC1
+:1061900057B51AAEB3456FA5CC6070FD0EE4C6B915
+:1061A000F0F194587B46C0B57B8CDF03F8F0ABE28E
+:1061B000A942AD1F62F074FABFC3D36EFDE8F0FCD4
+:1061C00095C3F3B343EC5E9B91F55F519F75ABE1D3
+:1061D0003DFB7C640E88490AEF5F117FEE9329181E
+:1061E00013E6F8EB2DE5F459CAE58F07CF5091C0BF
+:1061F0007B57631E66AF4C926AA15CBE007FF72C92
+:1062000093EFC3021A3F9EBF21EF1946957FD764D3
+:1062100031BADE9D2E8D8A87D22C36CF0347EAB263
+:10622000C1BFF1D83B0602726133CFBF7ECCDE6BBB
+:10623000847BA6051EA15C429F017D741128BCC70A
+:106240004A3F332AD651C6D3B0F1D6C6F18D184F86
+:106250003CA76415327B553AA48573386BAF7D0B30
+:10626000EF7F5B5B2AA3ECFDD2F85F1D87FFF05B3D
+:1062700029B7307A999245E16B91FE90F06D5A0EF4
+:1062800048D17F2A827C15BD1FE71FA078EC91467C
+:10629000E2292D8BD18B989F98BF80DB76DD025C45
+:1062A00007DBBB06541AA5BCBDD017895CFFC1BC77
+:1062B000505F5C2BB3734C6532AEFBDA8AA978EE83
+:1062C0006C37CF17895EA31FF577441670BC3D76F7
+:1062D000F1B711B84739D8AFC3FB3F883CE0BE15D2
+:1062E000EE1FFF8D8CF789537AAA81FBCC0E1C39E7
+:1062F0009F00FBEBF9593A847B3E97878317B535AE
+:10630000781EECC867766D0CFDD76569B97D12897A
+:10631000C039AF3525EC3C8B95DB03D623271B001A
+:106320007E6BC543062986DE66651910AE35FA68B0
+:106330008A87F617D8A72561E6FFC17B1987CEB3F8
+:10634000DA191E5A4A0FA1BD60ED67F735D66529E7
+:106350004CCE52B8F7D2F7E6899FD9EBA1BE948E06
+:10636000973BFCBDCDCED6D35CC6EE4B5A7BED3F02
+:10637000DBE13EC844F81D47D8EFF2790AB89272C3
+:1063800035BCDF482417F8CB2E63BE5A6FF85E2366
+:10639000D8FB822FDECAD562BB47F93989472B0A61
+:1063A0004370AE4CD0B135DBFF4016CC8FF2C50B3D
+:1063B00068EF447CD3103FF662C833DF2545E632F0
+:1063C0003B446F073E2CD46854FC16E1EB269E54E8
+:1063D000FDA3DD733FA75DA1F73B424602E74DFEFB
+:1063E00078716622D8A71D19C2DEF31A015F9B25BA
+:1063F0005F620E8CF32F5ADC0F1E3872BC01C6EDA3
+:10640000A0F302BE7DF875EB6AB0533AEC5EE4533C
+:1064100031BEECD0F0F560FDECD67BDF047F64D4B8
+:10642000C1EECD3A38758611E89FB6D3403F7FA0C4
+:10643000FBF7F004E8A71AFD060BEDB3A6C3778BB4
+:1064400088FF11B06F17756B55F7833CCCE5C5C25B
+:106450008B16128ED92F2CACF80E9E6B5C78310106
+:10646000DF3FCCCFED3FCCCFBDEDE2F878993F5F79
+:10647000CFFA8AFB6F4F9CDE4AFEDD8E3AC6F7BB31
+:1064800060FD9AA5013DA8FA35533FC7F3647F68C4
+:10649000B393B02106DE11F34C22E1987187DA5DE7
+:1064A00034917052ECFA32FA1D9EAF15EBFFD0E634
+:1064B000463C8EDDFF38151E87FBCF53E17164FF2C
+:1064C0000558FF87B6C24BF43F798CFE7354F00F2A
+:1064D000F79B8FEFCF1DAC7BD642F9EE6078C5C637
+:1064E000574BE1F7F70CF87B1BA4AFB70ACFB9EE17
+:1064F00022780EFA81FD7F7A1FF2521FD8AAF7C0C8
+:106500001883BAE83CCF287A269FD88370EF9C780E
+:10651000BE9D9587EB1CFFDE2887EC90676A2C9464
+:10652000EDA0E78C24125A01FB975223CA3911DFE0
+:1065300012FDFE3453AB92B3E27EA1469E7FD86833
+:1065400061F1AF26ABFF2CACFF124D57CBCF681FCC
+:10655000A70B3BF07C3B210EDCD788F88E0CFBC5EB
+:106560003C707DF9089C0B9B97E3FF0CBEFB091563
+:106570002B10EFD15EB1CD0FF9798FF37DE4E3A657
+:1065800088DB13233F75D9F257B31BBAE2E8B7ECA7
+:10659000773BC28C7E75D940BFDAC8CFEB72E07C06
+:1065A000E300BF674E41FBB9AEF430DE475927FC2C
+:1065B000022BE3F356321D604F8B785402E41782AE
+:1065C000DDB086DD53586F61E5FA5F27E1B917BA90
+:1065D0001FB214819CD9AD65FE221E073BCF611E00
+:1065E00034AEC902FC0EF27C97F3FDAFE1BDA7E724
+:1065F000578E473AA8FFE50FF11EC3DDE94C9F0D0A
+:10660000EEB3A13EAB3778CAE15ECDDDE9CC6EEDED
+:1066100095C309253176ECA3195528A73F5E395E4D
+:10662000131B27199FCDE4C21AE1FF94A3E570CE96
+:10663000EAE3D2F03FA13EDD63C2DF1BD3ECFD53A2
+:1066400039DEBFBAC680BF6351B577E2BAB9B05F71
+:106650004C90311F5BB3D784F09C5DC5EE83836F94
+:1066600041EE35EF1D87BFCB566F8962DE64B3D92B
+:106670005300F1C1FABDDFC0DF9F38F1F8C42C90A0
+:1066800083C793952CBC6FFB718A743AEFE3FB26AA
+:10669000B0F79D57E3B96ADB1A8B7F34FF88D04B84
+:1066A000F1F7CDED4E2F3ED707F89968F4801C5EC8
+:1066B00038E45F67F707D6BF199DA524A0FF06F34E
+:1066C00017EAEDA7F0F71DEBBB8FDD49303EE9423D
+:1066D000FA15FBBCF871EBB9FEDAAD8FCE83DFD5CE
+:1066E000AB6FE7F8E7BFF759AF29C6DF9B14F85F38
+:1066F00013771FF3F738DEC5F3C41119EFB9A47689
+:106700004516F88F4EEC3720BD9D583319EF5710C2
+:10671000E3D55358ED944F8F3B9529B0BE0BB2157E
+:1067200036FF76B67F15EFE9F811F8BDCEE83E2DBD
+:10673000E6AF0DDAA30910C714ED4479683EFD5A9F
+:10674000FCBDB7DDE90770DD295D11A02BCD2F6DF4
+:10675000A8B703BF64BF1BF7712909829F34F88E65
+:1067600001F77B07F719D09E1E7C979DCF1F71EF15
+:106770009F359A05F7DC067E390EE5DA6066740B04
+:10678000B3BF4D78CFE4E051FFD53C5E9CC6EFD15E
+:106790004C03BBEFC23E5318EC3EFAC4B843906CB6
+:1067A00073E3FBFD16BC2F883ED9F924698F1B7F4C
+:1067B000378974F1EF23F8FD0359FE0920A71FC89C
+:1067C000A3FD5BE1FB93D8EE42AEFF4A8C591192D8
+:1067D000CEC74BC77E33FDD9F85EFACCCD7E0FA86D
+:1067E0008BD747B03E60F05F8DF3F8BD8DF48C32EF
+:1067F000CFAF7A5FE47DD949B88E026E8A67B42341
+:10680000E3F1D293CDF69F021FF17439B49E9780C5
+:106810000FFC3278BFC03EB68EAB26EA993CE99CAD
+:106820008CF632DE30149327B87CDF074897833A22
+:10683000EFD3A097A2477584DDC3482D03F05754CA
+:10684000B076F516E6F710709CE1E7071A3B591E83
+:10685000E199E73EC89A6F85F3F31FA8CECF0BFFEF
+:1068600021ED2401FC33568F925057C4EC762DC293
+:10687000C57E8F6E8D4EC1DF0B0C3E3E11FD122783
+:10688000F4CA5EBC0776D5151AA0276D3197BF4FA5
+:10689000B07989FBDDC43D6DF17819C866FAB2990B
+:1068A000F8EF823BFE8F132585074BF1BE4A74FF3C
+:1068B0006B20CD52F69A587E3BEA8591F742EA2F3B
+:1068C000F17B82FFBBE553B05665809F6002E8D53F
+:1068D000D376B67FC45B2240BF6BD93C3BE003B8A4
+:1068E000FF82F84E835EC45B25281E4E4BAC3E9E55
+:1068F000CE84BC1B810FA01BE817BEA37D7F9E9D8D
+:10690000C3F63F76273F9417D4435EAAD057014978
+:10691000D6C07D0F271D4A02D0E5C9CE3CE772C81C
+:10692000F7712829B1F676E010C17B0E1438FF7399
+:1069300035FC2E92770AF805773BD5FE8878785E8D
+:10694000A81C40FDF35F98C6C553008000000000FE
+:106950001F8B08000000000000FFB57D0B7854D5A8
+:10696000B5FF3E73662633794E1E8484409824E436
+:10697000018430090F4141074810156878092885BE
+:10698000930710421E88B6175BDB0C24205AB441D3
+:1069900051D18B76404154B4414141037700A55811
+:1069A0005163D5566DCB0D88BC1F31A897FFADAD97
+:1069B000FFF55BFB9C64CE90A8B5B7F93ED8D967CC
+:1069C000BFD75A7BEDF5DA3BDF7C433FD7096175D2
+:1069D0002B42F41022CE6D11629810A3DC82F34298
+:1069E000D885C811FCF38DCA89DB3A5C8885F88D9F
+:1069F000AAAAF9DAB59EC82BEB2D5C1FE375467782
+:106A0000F1BDF1B5FF50F228B3214C0887FE3D5D82
+:106A1000880F311E8D7BEA90DDA70C461A2EAC093B
+:106A20004254AC75FA451AA56F4ECCBA53E685426E
+:106A300075C76C5C99D84AE3966F2ACA1291B21F47
+:106A400041F3AAD0E7559EEACD52870AD1F6A8EACB
+:106A5000DA84F6EB559E8F6AF3B81EA5EF27D6DBD6
+:106A60005CCBA99F0A7D3E277A6BD1C5B994B70A42
+:106A7000ABBD80F2562DDA45FD2E78542DF677B158
+:106A80003EAAF781B5A00BF8604D893A7C32A81E6A
+:106A9000D66994E3BFF7687257D1FCC2E977CC633B
+:106AA000A3E2F7D1FC4EF4D1E6217FFC9330B18212
+:106AB000F2EADA45D1EEDC2BE17DC2A1457B720121
+:106AC0005FB91E039EA1E318F0BC0878C620BDBACA
+:106AD000C54BF0AB7D48F5A0CEBEE64BD180DF982C
+:106AE0003D4547AEC1F7B561228CDAEC3B9CFECE4A
+:106AF000AD348F8BAB55413D8AD23D198982C6DBBF
+:106B00006EF97C2EE073BF4DCC7A91D2D2B7A747F5
+:106B10005B28FD46A71FF5210927356A7AF47CAE6C
+:106B2000DF3EB998F2C7DC9EC482A07A3FD6E92C3A
+:106B3000145F656BFF168D712AD6D8785D065E2EC0
+:106B4000621D34BF8B8D11FEE504978BBDDBB85FF2
+:106B5000034F46BF15C083414F546FA5DBA58FE39C
+:106B6000B31747115CD3B4E19E2EE864C183342E81
+:106B7000FA5B1FE575E67DFF710D7874E09B962545
+:106B80000CFC038F4FA46DBC97BE59DEB30AD193A2
+:106B9000E0D0787DAA42DFCBF6840985FA2B53DA60
+:106BA0008E28099C77FB14AC7FF13C8C57F67198CA
+:106BB00005E5C7F75E9FC7F30AC12BC129B52B7A3C
+:106BC000BF98D696EA0982DFC53E6D7379BE067D11
+:106BD00074CE9BE751BB374C605F5C4C237C4676A0
+:106BE000C2B101F819C6F55D76A66F6F1EE0D7B188
+:106BF0005E57C87A5D21EBFD40307D0B8FC6EB29D7
+:106C0000FF24CC82EFE50FDC94E5A6718EDF3B8E8E
+:106C1000D7753CCE9B87FD753C95FACFBD729DE53F
+:106C20000FD03A73BF659D8D4EC657B7EB8C6B7B0B
+:106C3000427CCB3A37EA7468ACF333AB3BDA8AFA7E
+:106C4000BB55B19C8A6AFB14DF7F8DCCBB56D0D07C
+:106C5000B536490FB56B23FCC0D78566DB047F6E64
+:106C6000271FA0F1BE273D58981E8E8F753F3C020E
+:106C7000F4759FEAF2B9019721EFFC9CF2C7EF5738
+:106C80005D02F9B1127EC40F2CE00FC7538B27733E
+:106C90007EAFCDB582FAF9B4F16F7F04FD5CDC63A1
+:106CA000730B5E5FF1FDB390A7F982AF115C6EC606
+:106CB000B854CEEB57EF19D68872F1E86057A6BBEF
+:106CC0000BBE1402E78A35AA691FD201C1E3D53E83
+:106CD00090E2C63A0C381387CD9A3AA8131EC84FD3
+:106CE0001FD409975ABBD09AF8FB12FB944141FC80
+:106CF0000CF04997E744FF3CC9C7D2A283F673C89A
+:106D0000FC42F98F51CF48FFD2C157CCFC7851706B
+:106D10009EE05019925F1CC237AA42CAAB43CAB761
+:106D2000F7FA9CF940E8F813D3E4BE31E058AAC35F
+:106D300071BB45917CE43EC5BF897E2DB5BAED4B54
+:106D400069FE2F8E11F3D04F995538AEE57DD9CE1F
+:106D5000EB2BB58A86B0027CF7703D63DDD45F43D0
+:106D6000581CE5C3251FA27A13EC417983DF1AF37F
+:106D7000094F93F030D2C55B9D8DC783E059DD1478
+:106D80006BCAD7EE4A6E3CEEE8CC2FC62FC9F46F23
+:106D900022AD7E38E0227FAA77B51E8C20FA49B258
+:106DA00068E169D4EFC583FF1B9DEB66BC0F2F26FE
+:106DB000FC16A8E92F1DA6F5B6ED563D9BD0EF9B1E
+:106DC000F2FC115F5F7A781B7DAFD99B21EE75775E
+:106DD000AE3F148E17775D8A4EA7EF170ED9C30505
+:106DE000C901A5CDF163EDD1BCBFBA84BB5B87BB44
+:106DF000D1DF056B6BF494A07A17446BF4D4207A3E
+:106E000029DD75A94EE431FC7C6A101FFF744F8F99
+:106E1000B12A7D2FFB7DAFB1164AC7E9FDDE6F7346
+:106E20003FB986E6EDDB1DE6D94CF3BEF0E62C0B50
+:106E3000DA5F78B3424F7FEAE5F4B34F53317EB463
+:106E400045D2BB31DE8834294F95598E3E311AFC2C
+:106E5000FFD59E69F5699DE56596822CE0799BAD2D
+:106E60006D2EE67D4111AB95B8CE7EC6A5B9B9FDB4
+:106E700085DD279F007FF8F4FE3E05602B177667BF
+:106E8000E769547EE1E321592EEAF7C27DC91EF07D
+:106E9000856D36F74F99DEEE89F260DF1BFD619C50
+:106EA00025E87FF755C335A41FCBF9523E4F93E336
+:106EB000FA9482CE7EA32DEE5F8F02BFF8BDCDB3D4
+:106EC0009992A57FCFE8198BF5613F778187B2D57D
+:106ED00061C26DE2272B78DEA5C263871C84721124
+:106EE000445FE5A298BFCF6F347F5F407C02DF171D
+:106EF000AE377FAF108DAB5A697D8BFCE6EF82F623
+:106F00008F2F11FBDAF869E2F37EF1D66FC24CF5F0
+:106F1000844FE70F0EE6C7A5B41FC1C79E57FCFEFE
+:106F200015C0EF3D2AAF33745DCBD3D2781D8F44AB
+:106F3000FC636E6B105E8F59843589E07ACC2E1C11
+:106F40004905E847089CABBE3D61FECDD4E4DEFEBA
+:106F50005FA59632DF4BB2E03CB8C305CE47FDEDEE
+:106F600039998A7ECA5617795B83E677D1E67DE444
+:106F7000E79057DF237E4DF58E8DF5378EA5791D71
+:106F8000BB57F5D47731AF33249FF9E3091EF728B7
+:106F9000C23F84F2CF9C4C2D21BC9CDE7C32B534A8
+:106FA00098FE15312B981E8D9466C2EB82AC89F445
+:106FB00018AD05EB09ADD7895FF37C0D783A55B173
+:106FC000A42B7A7814744FE5397F5705E4CE9A3DA7
+:106FD000363FE83362E3170FDF0AFA6CB6B940DADE
+:106FE000B57B542FE474B15BF567E21C6BFE34BAD9
+:106FF00012E7CCEE212E3568DD740E17E37CB9B0B4
+:10700000EB5262592EF73319F244ED9E873CA0DF14
+:10701000EEE6F15C9AFAAFF13FAF99FF9DCFFD200C
+:10702000F146F0818D27B2C0DF890F3E9786FD992A
+:10703000F5B51D79215A8783FE687E2CBF5FF47FEA
+:10704000C5F2A5A359F5FABBC0C39E343BC3FF07E5
+:10705000CF6F02CD2FB1737E349F3DE0CBC63C6B2A
+:10706000DC6D769CB3171DD179E0A7B4A089F989AE
+:10707000FAF9E4067F2D9B2888BF16EE9EBFC20951
+:1070800079A151F1400F286F56F9DC2ADFA0FADD13
+:107090008497C2ECBBF63B219F3E44E5D474BC3AD6
+:1070A000EA8FB3A8FEC2FB54CEEFDBF8D33FDA8001
+:1070B000D70D3611063C86476FD2C7637968913E7B
+:1070C000BF45CD379D56A0B7EC513D01B4DF1CE55F
+:1070D000C1F7B2D5B663C1F4351FBF507FF3D72BCC
+:1070E000FE401AF884B9FCC2309FCE2742BE6F5CC6
+:1070F00035757F02522BEB898BFCE672FCBC4EF39C
+:10710000A9D57FDF9AB9A617F073C129440BF6AB56
+:10711000B595F51D11684D051E2FECFE2C1578ACAC
+:107120007DF57FB24417F8EBD84FCD510927228463
+:10713000384BE7C63716D0FDA5C9C55DD47FB18FE2
+:10714000DC175B6DBE5E9063F76FFC8AF9C1C5DD2D
+:107150005A5F5717F4DBB95F7D4E4B12D280532034
+:107160001DDAE4BA11FB84E4C17B411F9B564DDD5F
+:107170004479E76B364842A2363392F70BF6C7FCE8
+:10718000A07E8D7DB2157C01E930C91F5EEC23E540
+:1071900084D5BABCB0755FFBE4CC2EE6B33ACD26FD
+:1071A000CFDB3E926FCC4D2B0E4F879C61F1450398
+:1071B0001FC2EB7527107C159DBEEA972D51F03D3F
+:1071C000493472DA5B3471FAB8105A24EA0B8F0B27
+:1071D0007016A24F2CE0C77B9ED7AB31DFFC898EA7
+:1071E0003BF06AD0832F56F837D3EFEA46875063D7
+:1071F00020EDB546A351D4A0A9BFEE4BE5B60F5480
+:10720000D69FD43E063E3D2EE0F7CBC8E931C1F80B
+:10721000DB77B87402FAABDE497A2EF5777E874DBC
+:1072200004A0575969BF503DDBE12FEC69E04BCD1D
+:107230008A80BC5C4B797CAF1D65F5FA83E0929740
+:107240002EE1919A9EC570BB60F51E9A08FA73955F
+:10725000DA21D7DB0E974FC079634B2AB5635EFB0B
+:107260000E8F75A4016FB156DE37AB9A8D715B5CE2
+:10727000E83F2AF6039E6F43AE454453BB868FC258
+:10728000FC0C4C87E443613A5C1B02850E7717F8CF
+:10729000F189C2143182CA77A81330CFF3AE5217E6
+:1072A000F0688B957687309B7702F49AB0D8B878DF
+:1072B000CC6F447A06CFFFABD8253CCFAF48BC801B
+:1072C000BE41F27A31F20DBDCB55867DE323BC8FF2
+:1072D0006B1D72FCA83D2A9FA362A443E7DBEFBBB2
+:1072E000CA689CC8BEDA24D083319FA861AF0BF076
+:1072F000E71C8B85E5B3863722D7802F18E51BD294
+:1073000025BD19F858996075817F3CAED3E74A577F
+:10731000B1A320689DB61E161D5EC50EC069BBBD1B
+:10732000F810CE9736FA8E73737FD25407F414AAEE
+:1073300067413F27EA68C764A3DFE90EC07741428F
+:10734000E978B45B2896ACC27E5BB85E1581203EBE
+:10735000DB6093E32EB81C2102433AC75D40F8E39B
+:10736000F697A3F97B8353D66B8892FBE7CE7429FB
+:107370002FAED4D3B57AFA83F9BAC7CCD7CFC7FE2C
+:10738000714BA9E4EF77A653BFD54AEB788826ABBB
+:1073900092DAED80EF893A97088405CDF78A75C6B1
+:1073A0008B40D0381DF52E3B45203E181F6EC6473A
+:1073B000E77A23B9FC445D12C3B1FBFE534C70EC79
+:1073C000EC3FC304C72BFBCFE2F2137539DFD1FFCB
+:1073D000C06EFA4F33CDBFB3DF7EFC5DECD2FA82D4
+:1073E000BFDCED227EC074D3CA7626BBA2FD067632
+:1073F0002FF1719880DCF79553CB7605F1876DE915
+:10740000765D9F0BA480DFFAC43A4E6B775D1A8FCE
+:10741000F66EE20B6CE7D0CB6B451BCF13FC02FA88
+:10742000BD48B6BAB97C97960DBDC89847873CF35E
+:10743000BB489F85F641D89EBF47631F5FB4B64DDA
+:10744000867DAAA9598D08DED707F4FD31B6CF177E
+:1074500079B0D7D5A01DF1BD9FEE5D9C0DF8D48409
+:10746000B5E561DEFBF7FE2D0FE7C8577B16F7C5C4
+:10747000F7AD549FE50F7B5B8D27A8BF7EC2E5B3B8
+:107480008CE84C9BF5FD1FFA7DEB9EFA5E98C736A3
+:10749000D83D482EAC59F656C6F178B021EF83E0BE
+:1074A0005F82F816EB43BBA6A96320DF7D48320F4D
+:1074B000E587EE9672C3D03EC26F4983DCF7E12CBC
+:1074C000F0899A61761754E1F0FC1696B7C38739B4
+:1074D0005C389F9FED93C1EBB3434EC840FBA2784D
+:1074E000A6E754F1AFC96D1B42F64FE00F35DB68DC
+:1074F000BC6AB575F23885F7D131F0A99AB7BF7873
+:1075000047D75F13819F5A8C4BF0785FEF27214359
+:107510003B897A9AA3F5BEABA8DE8C9B9353A11F3F
+:1075200095E8FA9998484019C9FC6810EC20579ED4
+:10753000DB520F7A4DD134C0C197ECF0E0FC1A98C1
+:10754000221CC971D8D0FEF4A934EE57E916C32E17
+:10755000AA60DE03F4353DDFAB69692C9F93FE38EA
+:10756000D0D13F3BAE25C3FB77F00BA3FE8737DFBF
+:107570003A48EBE2DC30E479BBBDE936CCB3AD3A56
+:1075800092F54798F3D0EEC99BC3022AEC8AB6C89D
+:10759000D5D0E73F8A987BB007C1E3FE282D228330
+:1075A000DACD9A79C32AE495FDF1EEA5A0E792D64B
+:1075B000E1C0E7D34E2D2683C6AF72687D1369897B
+:1075C000E7FB68D93138E48BE3259E44F1A0E22E35
+:1075D000E72FE753A2C8F10F476949E8A7C4D2F2E1
+:1075E000C455F8666D617B8368E8C1FD9CB78B8AE2
+:1075F000AEE47F030E47F475ECB3896B2FD3FAF634
+:10760000AD8DF1D4D37CCBEF9E39B796D2F996E20B
+:10761000C4806A9A7716D655E52BE99B4CF2F3792C
+:107620009B3EEF65FABCADAEACE0FD1C3AEF7A4391
+:107630005EF985C2FA20FF50FE155FACFF5ECA8777
+:10764000592E7D300DE7D6200BDB493684D3DE2260
+:107650003DF25D7D9E8FD3BE73C4F1F7D5F89E14C5
+:107660002EDB273D6CF1C37E503C7637E3E9C99AA7
+:10767000488F4A639508B71D725099F0B25CFCD9E7
+:1076800098BFED69A575156668D7016EF3E22DA95F
+:107690001FF03CB48153206F8D92EBF8167993D78D
+:1076A0003155B86C2C94893516C81F535D7229F377
+:1076B00015B93FA609AF0DE3CD101AD7FBC305BB23
+:1076C00017FAC41FA00BD1BC670A1F7F9F2DFC9C1B
+:1076D000DE2A025CFFC7A295F306BC893EE6254878
+:1076E000FA38D95365F8DF8C79BF1791D76719AD90
+:1076F00063CA23D999AC5FADEBC1F0F9AE794FD134
+:10770000E986F6EF3CF483FD3B9DFA997A63C8FE67
+:107710002DEC61E033F3DBF6514B7B87FE14994C83
+:1077200070B85E47E9F5DEC5AC3F15A991C247F8D0
+:107730006919A5FA21771CF22E4F48A075DCFDB916
+:10774000D4837EB75CBC3D84CA7F374615F5DCD256
+:10775000CBF2D464BD9FC9BDC79F869DF5B00824F8
+:107760000CA5B9175DD65E8FA1F94E56B735C45238
+:10777000F984DEA4C704F1BD1B12B65BA1D7DDD826
+:10778000CFFC7D62AE59DF99241A55C079F250734F
+:10779000BD7D800FD1D78A0CA9B788016280EEDF4A
+:1077A00063B9FB477A1FED132FD9E10B793543BB42
+:1077B00007705C3AE9B3B9185758E57A6ADE51D9CF
+:1077C0009E778CE42C2F9DDFC7EBE8840893F208AA
+:1077D000F2A7486E407AA6CECDE9393AE7517EA1AC
+:1077E000CE23EB67143F807D56BAFA732BF072B745
+:1077F00053C2F96E67AA1F76B58AA6C6F1985EE5F0
+:10780000AEA68348CB03C5E371CC2E38B4E420D2B6
+:10781000BB3BF4B6250EDD5FC0F3BF5DA7D3DBA392
+:10782000A6DE3488F6C9EDBBA5DFEBF63E53A74DC7
+:107830004A40DEC6F9EEE8A8FAB22234DA22CFA82E
+:10784000DECD58B7B7F9E8C1785AE7C9BA113CFF9D
+:10785000D3755E9EFFD9BA099CFE3DA3F839AE27C9
+:107860003E67796CD2B6A3D614AA5FE455BCD8B7EC
+:10787000D77A85DF4F74B1DE26CF81F5740E601F95
+:107880008F1934F5F13B30E90C6D27DACFB871511F
+:1078900011C6993CA2C48A7A33BF16223EAD934EDC
+:1078A000BF8BEE8DF557EBF83BBF5761789EDF1B22
+:1078B000CBF06CDF911103F960E9CE8C9E48896FA3
+:1078C0001A7A6F04E0D77ED9C2F36DFF289CF58E3B
+:1078D000D0F64B770EEC897A6709DF2248DE3CFB55
+:1078E000FC7FB883CF95B3714D5F7D02FEF657C91B
+:1078F000DF48B239F118F85FEF5E1ED0CB055DCEE0
+:10790000263D2302E75F8D6E57047F42FE6CB8B4BC
+:10791000E70E7F21652CF617C673139CC31C19B99B
+:10792000C787707F477E46FDBDFC589207FAEFB9C6
+:10793000ED8FA463FCAD4DF33F798CFA3FEFB7F8C0
+:107940006C744E9D174D175E051F7E2A92ED7B7756
+:107950002B342F9CC39B7B713E47B1862FC3392CA0
+:10796000FCBCCF7314B77519F1ADAA171FED057ADA
+:107970007C8D603082CA5F5B1BC17CED359BE7C8A4
+:1079800032F4F7B8ECEFE9FBEF3CB60BE97DD50537
+:107990007752FA65461CE3A1FC814503D09ECE795F
+:1079A000914CFD3DF78A1280BF6AD0BA7D2B926957
+:1079B0007E83371CB5F4A234FF29A51EE9C03E37EB
+:1079C0001E82FDF96F196E6E3F645B9A9A826DD9C3
+:1079D000CBFFC9757CFE9BE582DC759F8FED253A58
+:1079E000E583014AD3998D34D7B0D48F0A348663A6
+:1079F00023AF6767F3B4F76F155807491E98778967
+:107A0000DDC3E791DFB711783EAFE57858BF2BF6BD
+:107A10003D0A7A3BAF257A703EBD4CFAFCD5A87F73
+:107A2000C4CAEB7CE5A9F7A261DF89213DD909BF72
+:107A3000487EDB78D4AFEEE316F087F579E2FA09F9
+:107A4000804FCD8E9D1BB99F2A8707FA6EC5CE4BFE
+:107A50000753202FDE203C99A0C71D32FFAB42AF59
+:107A600047A5A5566CFC52E65B8A395F4CDA27FCC9
+:107A7000FEA24CCA498FE8E7A068CD637EC924EE18
+:107A8000EEC4D7AFA818E5EBD37CC9B06F1BE727CE
+:107A90009D7BA9FDB065ECB27DCBD85B53192EDF81
+:107AA000F3DCB3EBE797D1DF2376E173523F30DFAE
+:107AB000C09EBEC12ECFEBCDC467402FC6794DE32B
+:107AC000E6F593EDBDE0AF29AA326807C123E59141
+:107AD000309637BEEFF8B36256F1F96DC85BB5E189
+:107AE000922FF2D941ED5F88D2AEEE370C76327923
+:107AF000DE0BAB3B17F2C8E351DE6BFAB1BCD59697
+:107B00008A35D0397A1DE653A392FC9511247F451E
+:107B1000C67DAF733410E52D42FBEF5B7F6C04CD67
+:107B2000330629F1EF68A486DE455A4897FC397D73
+:107B30005B13F8F34361923F470D61BE64AC33744D
+:107B40009C03C40734E23B6FD039A3113F181739A7
+:107B5000C6CA787DDD527590CEE522390208DA1A60
+:107B60003B94F3DE28826361A42AB42EF4472325D4
+:107B7000BCCDC73AC7274498EA1525C4DAB18FBFF0
+:107B8000EFFA551D4F6AB83CBFD47083BFBA137467
+:107B9000BF7DC8FAE57A6F770E63BE3A56F97EEB81
+:107BA0002EB215DF093C8F8BCCE773735CE4942312
+:107BB0009AE075D4E17BE87A43D7251CDF4F8EFA33
+:107BC00089227C16ECC7CFED6C776BB6B53EF75BC0
+:107BD000826BF3A25C0FEC472FD3BE70809F4EB533
+:107BE000B39CDB0CD992EA37F770715CCB6BBADFD0
+:107BF000DC375B6FEF147CBE34CFEEC57EF45E6184
+:107C00003410EC48F5D26FD26C5BF216CEEBE6E5A1
+:107C1000291E9A8150C1EF69CB7CE497FCBC5E09B8
+:107C2000DC0A7F81EF73BB40FD75B1FED5E9945F3F
+:107C3000F78B0C9ECF47A48FD762BC8A70E65BEBB4
+:107C400062BDC971049F97FFA1F279B22E9FF29194
+:107C5000CCD7D96EB36E8A37197EAD041D6FEB3663
+:107C6000CAF25EB093A23C4DB6FFC426EBDFA2D7AA
+:107C70004BD0F1FBB14EA7B4FF993F689323ACA062
+:107C8000FF77FB95BEC6FB467893E1177AAC3C9331
+:107C90006D98B754DE90C6F4A4DBD366E9FCDCE84B
+:107CA000170D1CC3214FCB9FD9F3373B41DF332A3C
+:107CB0009C47211F7E54B1220A7AFD0C4D0D842170
+:107CC000BE6A7A91B743AE4BC7B85E396EB9A11F91
+:107CD00006CA00DFBD6D0E712FCBFF8121C1FA9660
+:107CE00081E745FABEAD6E1AF360B07E5D6927FE8E
+:107CF0003318E5723F57456ABF077DD5EEBAE1C13B
+:107D000060BDFB54F94379BCEFF471CFD5791F3CCA
+:107D10009E09396F02A7C6B81DFA11F049FDF6D5C4
+:107D2000CF73DAEF3E0BF0DAE494FA92B5EDE38527
+:107D300094AF9F3580CFF709531D5ED8F5DA77846D
+:107D4000F961AFAD9F15EEC5BAEAF744F9615798EE
+:107D5000A7EF1BD2BBF8BB6FBB8DE9ADCAEE7F6648
+:107D60000BB5ABDADB9FE989E895ED96BE57236446
+:107D700079B4376DE55094F764FA79CDE68EE1F287
+:107D80003755C1E5E181AC5882779B533B8575132C
+:107D9000BDB2FDBCCA2EBF1FD1E912FA25FBFF966A
+:107DA0004471BF42CF6B3F8F677D4F58BDC9F39180
+:107DB000BF7D20AF47B3CB7D216AA47E78C425E781
+:107DC00075A4399EF785418F478AB7DC939580EF7C
+:107DD00024AFD2FCFEB24C0DC01F6ED09F32F5F224
+:107DE000DB5751BB4F5F55D96F33E7D78B0FE3FBA1
+:107DF0009C15D51339ADBC6B329FCBF51FA7EEA2F6
+:107E0000F284A9A7D8BF6BE07F4E95D99F9A98E9D5
+:107E1000553381DF5CFFF68354FFE1D9271600AFAD
+:107E2000C333354726ECDBF6D697FF4CF36D5DFE8A
+:107E300027D6A336446B11F87E71F7D35CBF66C5B5
+:107E4000FF2C807E50639574639CDBB53A3DBF91F7
+:107E5000A9C5A2FFAA15BF633D2222B745F2D7BB31
+:107E6000BE1F3F3AD3BCF96585DA2D0E6FAEE154E3
+:107E7000F5E7E1FC3BAB04A2950C862BEB75E75CC8
+:107E80008168E047B348B972F1D610BF315092A86B
+:107E9000DB8BA8DDE226558F57F4DB41A7A1F51750
+:107EA000D377AEF73DBF578A26F93D76D7FDD73059
+:107EB000FE4500FEAE33CF646E023D9CDFF9745682
+:107EC000B09F3634BD72BE72FDE7F47D738EBED8AE
+:107ED000406FDBC24CF6850BCF24EBF426E9E9C2F8
+:107EE00033D9ECE74ED4F7D905C5670947BB5F081E
+:107EF0008E67109EA6E11C97E36D1A0EB9FB619D7B
+:107F00002F2E8E6F1A0EBE67F041E168CA63BB4127
+:107F10004E531EF464837F8AE2A62CFEEE6FCA42A3
+:107F2000FB972DD20E63CCA7F2B9148E7BA2B5F0CD
+:107F3000FEAE7C6EE026E48D71EA9D92EFD43B2587
+:107F40007F095DB79629EDE8A44FE61EA7B3A43ECE
+:107F500096F4825CE49365DE29F30B3794D8E16FE5
+:107F6000AFB7C9BC6B7D89FD18E6F73569B5C44F5D
+:107F70007374BFC5027FA9DD0BFBFEFAE5E11C3F70
+:107F800031DB3ECF4B69F67ABB695C030FFDFDE642
+:107F9000EF8BF4F9F40D890BEAA5B6ED0BC339F6B6
+:107FA000A4E8328E6049A6B4E33EFB6C477C91AAFC
+:107FB000EBDBC26DD0A15BEA1B8CD78FED065EEFC9
+:107FC00048A1F92FD6E3A55EB648B8FA9E957CE3A2
+:107FD000E57C2D05E7D505C01DE75C2CE57321EF99
+:107FE00049BC1979035FA1F05DF1F18214D8959F26
+:107FF000C894F6C7507C2C8F1ADE13E5065CCFD4EC
+:108000001DCA00DC8D759DA8F37AE968EBB4BFAF9B
+:10801000CF77688C8F7C47307DD76F1D7288242086
+:10802000716EABD58325D45BFDF743BFA8DFAA36BD
+:10803000F904973B80977391FBDF41BD051B620BF1
+:10804000A00F18ED17AE2FF29607CD7BE056335EEA
+:10805000063599F3837799F35B71060DFBE7DBE552
+:1080600007CCF92187CCF9931FDC7133B64F85EA31
+:10807000BB5F85BEF3E7F187704E9F7AF99568E0A4
+:108080006BF15FCB0F428F0B8D67213C2AD0737C45
+:108090005B14A6972BE25ABAE14346DC06766230BF
+:1080A000DD540ADF416BDA95F5CF8AA69BBD4467A4
+:1080B00055CBDECF907AB3EC7764D35A3BE4CED085
+:1080C00071BBE33B22D2EBC63E2A1921CBAE5E3612
+:1080D0004E7C8AFED6BC371EF458F22B85E59B9267
+:1080E00097B25F07DD1CDD3EFB464E6F9EC0F03051
+:1080F000EC920B9B954014E55D2344877F1FF18B29
+:10810000A50D21F19F6B42E282D699CB17EEDAF7EB
+:10811000FF104750E17882E32EAE8C67F41F805E3B
+:1081200059794AB07DAAF2A96FC2CCE5725DF3F528
+:108130007518E7ADF05DCBF17B57CBAAE238FEA313
+:1081400073E9A84B3B8573CB3877AF5EB75195F297
+:10815000BCB784FDC891768E8BAC76884004CDEB9D
+:108160005094DDEBA2EF97D647B1BCB280E45CE857
+:108170008B940A27C74D7A62D0EEC4BB2ACB65D553
+:10818000F1121ED5BF51FCB01D57C3A88BFC933212
+:10819000BF4804D8BE0B3AF206AD03F80BCE8B46AF
+:1081A000A95F565903FB009F8E7368ABB95E15AD8E
+:1081B000F3A338C87BE6EF35A28DEBD7EEFA262C79
+:1081C000F87B903D9AF55E43FF5675F94AFD653898
+:1081D000CB4F74208483BE6CBADCBEEE1E92236843
+:1081E0007D2B0D7BF85A29DFDDB2519E63249F67FA
+:1081F000014EEBD6927C86EFA46F20CE442C0AF77A
+:108200004BF95EEA0BEB6667B15CF4F23F5E0A4045
+:108210001F697B4861BBD2BA7CD9EFBAFBFA7339CC
+:10822000F8A7C2E384B11CB66E8A51DE87F5914F80
+:1082300030C564C8F9FAF71E6EFEDE4BF566C13E26
+:10824000221E74B27DC490FB0DB9BE2E56CBC91A46
+:10825000D6B9FE75B16D51F0BB898AF8EF25B76CC0
+:10826000D6CFE3365A3FFC2AC795E283F08F19F543
+:108270004666C97365F858EF16BD1EFB5FCA2D53DD
+:10828000EEBD8EE655FEB0C50D7BA18107E1F5661A
+:10829000010EC7D73A0B4077C3C74A7BD9917CC937
+:1082A000E723860A8E371AABF73B36CB624A93C276
+:1082B000891EA99FE345D21E1F35B498ED9624135D
+:1082C000CCEB2A6E65B2DE4FB9BDF8F7A3BB984F71
+:1082D000075D144AF9FBF86DCA26392F2FC7270E00
+:1082E0007FC0C9F6CEE3FA3964E081E86818CB0FA5
+:1082F0003A5F8B0DA19BB5A0079C87A00725986EC0
+:10830000CC74718B22E12BEE93F2F7BA589937E8CF
+:1083100082F43FF1BFA09B22C1F0EF4E0F34D6DBB9
+:108320009D1E4874B00874D0512F840E84D53FEC44
+:10833000DBFC42A52362872B848214ABF021CE178D
+:108340006724C3EB1EAB1FB178BDAD122F7DAC927D
+:10835000EEE8B4F18517707D2FE27D4B1E5C28BCE2
+:1083600054BF2445B07DAD1FC9553171DC4E204549
+:10837000588E0ABB13A5685F1223FB2FE92938FE2C
+:108380008EFAF35AE274E6361CFE5EC17205DA47D5
+:1083900017707B9F45B6F75A29ED9B21F598B69546
+:1083A000611CBF5C72779F2CD0C9C4B1663A39A2F8
+:1083B000D39591DE94EDD68D759E24F083D286FE02
+:1083C0007CDED43B8BAB77029FCF47B0FC59B2EA3F
+:1083D000C79386617E2FC47B80C23393B7B33FA817
+:1083E000B461F64F3E84BEB4D5C9DF2BB2B5F559A2
+:1083F00090FF15F7DC9DF4A174C6017B12B5D79AE6
+:10840000A69C7F95D2C9BEEDEF409E983C5DE5FAF3
+:108410009385B43F8B0639CE24DFE7D624EA6FD2AA
+:108420002885C3698E3A5DA9B7C10FA4E3F7A92CCB
+:1084300045977FE43D8192557DB2D273E13F21C9DA
+:10844000B80B39FD53A3FE186503E4A5BEE3E4FEB3
+:1084500033EAA31FF47B3A4BCA55BFD5E162E40966
+:10846000AE5CBF7C75D8D18C68A4B64036A5E9FD5A
+:10847000C7BE84754E4C17E3D703EE77AA6213CFBD
+:10848000B7AD84F94254961BF4AB9142CDFAE3D6D2
+:10849000FECC278F8E693B7A37E58F6E1E24ED8CDC
+:1084A000BA7D61BE4BB07C70748CE4776D9B239871
+:1084B000FE8FB85AA3E2A43D8EED0D653A497CB615
+:1084C000ACFE7EF8B9CB22ED47717ECC7F681AC72F
+:1084D0002794AD530361B807B0C66C6FA88AD4DE89
+:1084E000C67E08B51B84DA074033A0A3F2350AD351
+:1084F00061DF7A8F3D99F99CE2C2FACA2303FD70CD
+:108500000E947B9C1CC77C85FDE06B82FB70D8B908
+:10851000050789B5676B9F004E258D25ACEF46E4B6
+:108520006ACCBFFAAA0417EC179DFE26C25E0BBEEA
+:10853000646D4DC6BEFC55969BF13031CE9515C984
+:1085400074EDE4FB11476DAE2CCCEFE84AA705E7CC
+:10855000EDC41592BE69DF39708FE11EAB08073F8D
+:10856000D89A25FB9DB3DC5ABC91F2BD1DC21A15E9
+:1085700007FACA67FA5ED85FFB2DE675EA17620450
+:10858000E489B2356BE5BC74FA10D696C2781AE766
+:10859000D4E6B402D8013AE4DBFE63DB01C70EBACD
+:1085A00098AE303DD07A0EC18E9CDEBFF432CAE95F
+:1085B000FB3ED0CBC4B1817E881B2F52AB38BEB6F8
+:1085C0003D4978E0776C176D2C8FB4933C02BE6701
+:1085D000F019839F105D781D899DF8DE5247532264
+:1085E0001EBEB5CEC1E9B3752E6125786FAB4BE2E7
+:1085F000FC0B756E4E9BEA72F8FB8B751ECEEFA8D6
+:108600001BC1F997EBBC9CDF553781D357EB8AF937
+:10861000BBC1AF083ECC970CBE63F02783BE0C3EB7
+:10862000154A577309CCB81741ED991F1A7C10EB06
+:10863000B01474F22703CFE94AB12F09FC50B4CE2D
+:1086400006FF2852CF3DFF0AC1B9BD2292ED22EDAF
+:1086500042F2C1F648079F07A976B10BF689FADB0B
+:10866000BC47EF0E3A876FAD508435888E7FBCC40F
+:1086700029AC41743C6F59AC293F67D9FB6FF4A416
+:10868000FEDF8DD172B3691E477E79E2F13FD1F7EB
+:10869000DFFCF24C26F04EF3D8FC08C6BD2B5C9FE5
+:1086A00047AB9CD75D769697FA864B7DAB6FB8D477
+:1086B000B7F0E3088ACF3DA2E3A3242DF69DA7B12E
+:1086C0006FECAE9B47C04EB452DE4BFA04F8A3F2F7
+:1086D000BFE8F82B5D16C6702D6DD0F76B70DC36D9
+:1086E000C1F558B260F94EF10A01BFD7B15FD803A6
+:1086F000242B88638AC3AF407622E56B0EEC98ABDF
+:108700007FF711E47665D92196B3354724C77F08F2
+:108710009FED5C707FCAB2835C4FB4F636C56F467E
+:108720000CF5DAC13740E3C05F69CE7E81FD2E1AB9
+:1087300015BE7F54AE7F2F5FAD98E2A26764ABF2A7
+:10874000DE459695D3F359423F471AF9BC32E89675
+:10875000F808C7619637E6DB1704F1E752FD7B594D
+:108760008EC514A7797F969DFB398FCD49FDDE9B81
+:10877000936E9FCFFCCFCDF7058CFAA53905AB6082
+:108780004F2E5D83A8A6CEF625D9567D5E2EA97FF5
+:1087900039E85C8BE2F8A22ECF07439E39855F470C
+:1087A000F2FC59EFAA7CE1B917E08FACFC73189F7B
+:1087B00053958375FB4AAE7FF8349683BC91CA709B
+:1087C000C8E112FF85CFFD351A715DB53BA4BD9799
+:1087D000D2A3486BEEAA60FB5E8D87F6491CF8AD0C
+:1087E000D9EFFFFA0B7FE6FB9D84B0143D6E98E352
+:1087F000D46A767CCAF16BB0C7F986727F1C5F1DA4
+:10880000DABE56F99AF557422CC3A768CF97893C30
+:108810008F9D9712C1E76AF7AC4CEC2A8E28B41FE3
+:1088200023CEC1B0FFD58A359FC3CF597BD7849360
+:1088300092DE65FFA1ED1ECA8E4A38315020C6EE89
+:108840002AB6935805C79F2CD5ED38EDFE4CF6633C
+:10885000772777D7AEA7462492B55BDD3188B3BEC4
+:1088600028C484AEF0F449B6946BCFD33E823FFB6C
+:10887000E23695E5CA8BDBA2783FD46C7BF020E230
+:10888000046B9E52D8ED582D5A38CEAF66872A1CFD
+:10889000C1E71DEC47F1DDCF73F173514B405F8BA6
+:1088A0009A14EF669A4FBBC31DD323683EAF80BEB8
+:1088B00088341787350D47FFC6FC9F077F0B92371B
+:1088C00017353FC8F18D54EF02CB37BF8DE0383CF0
+:1088D0003AC9DEC13CCF6E18C2FEF5454DDB6B5880
+:1088E0003ED816E182E9E98CCD7C0FE4803EDE8142
+:1088F0006C298F9CD5EDD1675F50591FC23CB12FB9
+:10890000CFE871B846BB37F5766F664BF9A7265BA3
+:10891000EE4FA3FEA2A6A3D1FDA8FEC95DEF73FA98
+:10892000BEBE6F1645B6F03DCF933B22F89EE0C920
+:108930001DFF39FE351AEF7CD3980425689F9DC82A
+:10894000B6C97DBA41C62FF32517D6139A783D676D
+:10895000B7A528AC2F03DEA4B79FDDF112DF4336A5
+:10896000E4EB1F1C2F384BB186DCA3183D08728D39
+:10897000A355BFD7D1A6DB63FE6FFAAFD1BF27598E
+:108980008AF571E43D0D61C46FB864BD2235B72727
+:10899000F6DDDCC1EE99B8972DDE927197A2B7FB98
+:1089A00011E87F73DF8D67BBCB529BBB27F25F1C47
+:1089B000268595E0337788CE57925A87C1BE7B349F
+:1089C0004DCA15863FAD6AB522BC04BF5E44673E02
+:1089D000E4FDAAD06007C949677C3D5661F1DA71B0
+:1089E0003E46D9992EEAB73B37C1BE75C42E7CEC02
+:1089F0007F7BD129FD27E9D20FF218F617A5557113
+:108A000081AC78D8F174BAA99A4AE541F453B529F2
+:108A1000900539EA9C5DDA2B510EFDA9AA40D6AB30
+:108A2000D7E914FDA0DFA369AE0B2CF7EE8C12D0B2
+:108A30003F2CAF4449BBC8D3CE4D6141E776BF1C44
+:108A40008B1177C7FE4ADF66393FCC0BF2FC227BE5
+:108A50006316E45D63DC45D18D3CDE397DBC45E1C8
+:108A60008DD29FA3C711A23E8F6F13EC776A7B262E
+:108A70008CE5E633C92D2F63FC33CFF4E7B887A329
+:108A800069FE05BBB8DCC9F1E795CF860530DFD3B9
+:108A9000CF44B15DEBB44DCA63A7A312591E3B147A
+:108AA000F5F05CF6633D15A6C02E745A11F62494B9
+:108AB0006FEEC1F24065DD32F6D754127B811C4B5C
+:108AC000E904C87FA737F7677BD1E93755BE5C411A
+:108AD000DF57E3BB261AE7FE8CF58008B6239E79A4
+:108AE000F66FFD83FD3B465AF994D93E66D083511B
+:108AF0005E9423F960518ED4536EC871715A1DD1A2
+:108B0000F4703AAF53F207C203EB81B41F1361EF65
+:108B10003FD2B43B5189049C0359FF09B86F95FAC1
+:108B2000D6996D36F65355BE12E5653BD4DD57F147
+:108B30007DC94A55CAE3951679DF50F9E556B6FF67
+:108B4000D43FE32C003C08DEACDFB66D56F571E493
+:108B5000B8A7B7F4917E8D809E7F7910FB3526C62D
+:108B600089795359CEDA9007B85E7A2A82E3FE6992
+:108B70001C2FE2342A7FF67309CF9805AC27D0C1A9
+:108B8000CDFCB94AE7CFD5775F1383FB10E25D9543
+:108B9000EF795CB27A7A82FF86C2EBD11C9D3FBF2F
+:108BA000FC38F3832ADA37880F5BACFB13173FAB33
+:108BB000B05CB978D5358F30DF7DC726702FE25C89
+:108BC000D383D1C1F8A8CF91FCB0B3BD87EB2FA65A
+:108BD000FAB2FD5BD13C9F2D360FE6138AC7EFDD5D
+:108BE000FE59F507B5AF6C22F922EFCAF55F122DD9
+:108BF0003FFD33F8CB3627FB5109FF7C3FEAACAD94
+:108C00006901D67FF67927F39DB3B172DF9FA4F394
+:108C1000D4978DF9DCF46BB6CBFC619AC039B4D033
+:108C20006FEED798D7EA1C9BA4B7784F0CFC44D5BD
+:108C3000840FF447F8F911B77FD7C6ED43D7B34097
+:108C40006FD7B14F9F8F60BA39DB4BE2E5EC0BD9A0
+:108C50007C9E1D8D95F44EF34D85DE743656A6B878
+:108C600099047AA874497A383BA689ED026795ED94
+:108C70009C1EB5C97695CB747F3BD15F12E807B4D3
+:108C800009BBAA634D0BE419F0F9E1059C06704F8E
+:108C90003BD48E0E3AC5F9D7AAEF33E31D05F6EBA8
+:108CA000B09FA789EFC76BBA3C59B5ED4A7F25F055
+:108CB00054B54D617FDA7F19FDD0AC130C3F00D164
+:108CC000E5629FC2EF222C6EB86D11FBD396ACBD4E
+:108CD00015746FAC63B17E6FFCA8A2F27C8E3A690A
+:108CE000FFE45E399E01DFDFE7281DEF75B88CF3E6
+:108CF0008BF6F03B396E4947946DA4FEAA1A943561
+:108D00003C4E9AA1E7CAF5197022B0D861E73BAA98
+:108D1000DFD3EE6EFDC63CBB9BCF319DCF1F4D9385
+:108D2000F793DBDE96F7CC2F7D3D2426EE5BE44106
+:108D3000BE6160F487B863D020F5F322F81CF635E5
+:108D4000ECEB34CFAC0D66FF4ECE53E6FC806DE607
+:108D50007CEE0E733EAFD99CF7BC6ECEFF09E30EDE
+:108D6000EB8413F46FC43542FF460AFDDB1D26F584
+:108D70006FE4A17F2385FE8DEFD0BF9187FE8D3CF0
+:108D8000F46FE4A17F2385FE8DEFEEFE124E55BAFF
+:108D9000BD1478E0B8BADD4E233E81F7CBC5D98942
+:108DA000CC478555EAA51717E5B2FCD8616F9AE262
+:108DB000607B93118F9518AD85F7471C80D2B22A3E
+:108DC000398DDBB11DBAF6556987AE2A7046C2EE01
+:108DD000D1BAF2E42A883DA7A3B418D4BF686BDBEC
+:108DE00002F8562F3BC07EFFD6E5EE77AF93F863CF
+:108DF000FB8B115F5582730F7C9BF4251977EE7105
+:108E000004DB5343FD44624D501EF2D33A733ED40B
+:108E10002F04BEE635EDAB46C6C76F6C6DC9E0FBEF
+:108E20009F3EE3E0FB699FEAF63B31CBC1F298211C
+:108E3000CF23CE1B70597A9FB209E795A77F1CC339
+:108E4000B9FD50A6E97E61685A767908CBF31DF921
+:108E5000358A05E3944F5FBE8FF56ACDCBE7D2ED3F
+:108E6000FADCB2D75B4CF3EEEF0F37D1D1C0AD7166
+:108E7000217ECC5EA6FA8377A587F8310798CAA72A
+:108E8000AD1962BE8F5F7C8DA9BCAFBD236ECFA133
+:108E9000FBB9E4FC5CB2CEA5C8025E6F68BD54C5E8
+:108EA000F327F86FC5DB524E2DA773C61BAFBF2B40
+:108EB00052007F9D7732E057D1648B859DAD4C3F4A
+:108EC00087C432F3B95C61153E575C27DD55B88421
+:108ED0003796DA7F696D4C653AFAE547A92A8168C9
+:108EE000D180963CE8AF8BDE7C7238E8AA5ADD98D8
+:108EF000EAA2F23B14FF165C203F13B73D712495A4
+:108F000027A95A497FC273AA2D70FF1CF0D1ED1911
+:108F100002EFA47CBAE6A5688E1FD4E92FD5E60A35
+:108F2000071D6C6C54594F81FD4C8DEBA4938D8DB6
+:108F3000F1E1D06B2AC6283EC8C7065C0CFA08854A
+:108F400007C9EFEFBA69BD970EC9F7948C752E75F6
+:108F5000C9FAA241B637DE0730D67B5CD7472B373C
+:108F6000BE91753B7D3FD77F5F9E1B7EDCBA5DBCAB
+:108F7000EEC5966D5B92297DC7A1DD85752D7D7B44
+:108F80005CF4481AE7CB6D32AEFDB3754F3EE1237A
+:108F90007E7A77E39376E80F9556BF9DDFCD7966AD
+:108FA000A31DF10ED76FDDC8DF176C2D617B8071BB
+:108FB000CFEE941197ADC3A362ACB2C145EB3CDEDA
+:108FC0005FCA8515E1329EA6481DF54602D6B55505
+:108FD000C9C7BAA6176FB7E3FD8187F57AA1FBA6CB
+:108FE000FDF0B4A21EB07B35291CC7D4DD3E99111B
+:108FF000E8CFFB64DAE5344EA75F1EC87ADE8782CD
+:10900000B42F9C23B921FAF56155DAF59A55F94E3A
+:10901000983D90300DF2C25EF96E45359D43230AAE
+:10902000A0B70B7135A5C5A354139DD7164698F666
+:10903000C12C11B4AFA8BF9B452F537EFAC40C536B
+:10904000FD99D30786F89D0B3ACB997F5D6D7A8F9A
+:10905000A6FA2E9F5B61BBC758F3774AEF623ABB13
+:10906000D1D4BE5A4C35BD47B3E8A9F718CE4465F4
+:1090700076C4E154E8F758666947F5EFADFC9D16F4
+:1090800062DAAF7D333C7F92E7A58DFD09863D7D99
+:10909000167ECFE8EABC0CEF881745BC30EC1D9A71
+:1090A000591E69613D55483C54EBF6A8EA1C698F8E
+:1090B000AAF6B5D8118F4DF0B7A610486A1A15B6A2
+:1090C00037527D474A9CCCDF85EF3BCCF752D0DF4F
+:1090D00065941F524BB0BF42CB6B68DD38176A6096
+:1090E00047623BD884936C0733C6D1FB37E834F42E
+:1090F0007D80D0FE060C7033FFAEDCBAFD602F829F
+:10910000CFB4E2D87CC49D54354DB195E45E496F2F
+:1091100006FFBF546161BF7EFBE1034C6FED155646
+:109120008F8C4BFF76B8D478A5DD35940E17D0BA66
+:10913000E07F5EB043F1F815590FF0E905FA0C81B4
+:109140004F4A177033E0D501BF90727E3F6E28E220
+:1091500026E47B0A57C025149EFA380B34C17227C7
+:10916000CDCBCFF30AE9578C08DD8FB7DBD9FFB041
+:1091700041112EE5BBE131F5B2B4E3F4CD90EB6FD4
+:10918000DBA97820BFDF7CD9CADF3BE8A758C6D966
+:109190004F9F68DEAF1DF4542CF7CF8CCB89DCEEEB
+:1091A000DF4557DF454F86FF26347EDDB847E61999
+:1091B000A0DFB71A26867DF34FC4E11BF24177E7A3
+:1091C0004CC739E4D2F11099DEE5F9BC342A9DE3AD
+:1091D000CC35DDBE68F0694D6F678C5B42E5EE789B
+:1091E000D07B6F7E67715543466AF0FB37DA4A1BC6
+:1091F000DB815397C7735AE27425E27C29592EDF2D
+:109200006939764FCF44F8298EADB4254CA4AE8F82
+:10921000DD3934550C42BE88D34FD786CD0AB6CF40
+:109220001BE92D03E4F9619CEFE72D87A367613FFC
+:10923000AEDC198D90A1C52BDF1FEEA273BED9A2A3
+:109240002D1AC0FEE08D7CCE0BD7C63CD8E70C397A
+:10925000A37265514FC80355FF38F004E4016DB99E
+:109260002D1172EAE90F5481D01A3AE758BE38E559
+:1092700094F47D6A7304DFAB3CA5082FFC518BD4BA
+:109280007D792ED379DB7C33C68F70D2B8C330AEF4
+:109290007F4B12C6F5F8B230AEB63C33A62BBB8B73
+:1092A00091D6AE97F2DF16C3CEACDBA321F7230F26
+:1092B000B95F644BB91F79C8FD4821F7E37B0DFC0A
+:1092C0000EF01BD7B7E5436FF58D15394BF81C8EA3
+:1092D000CC815C7FBB12EE013FBA5DF1F4E478848F
+:1092E0000F62E5F91B8257231DDD46B25910DD5E82
+:1092F00077D92182E3EBC68858537E9C23D954BF8B
+:10930000C895662ABF3EA9BFA9FC0677BE297F5330
+:10931000CE4853FD499E31A6FC8F46DC60AA3FC56E
+:109320003BC5949F3661B6A9FE8CE21253F9CC5925
+:109330008B4CE5B3B5DB4CF95B2BEE34D5FFF192EA
+:10934000E5A672AF7059710E36431F23B8EF853E04
+:1093500046E9ED6F674606E375D4384B97EF0C3559
+:109360000D90FA5674AEF739D025EE09810EFBE860
+:10937000F780F6E29C1906BF654091FA704B32E81F
+:1093800026B45E68F9A888FD97F09465FFE76E9FA4
+:1093900061253E31EAAAFD4332287FFBC0E619561B
+:1093A000E22FA3AED9FF523AE57FF1DC37B27CF071
+:1093B000FE4B285772F7CBFC34C122C8AF06CE9BB8
+:1093C000E1A3758CBA2E7D8D47DA53BA8C53355292
+:1093D000C001719D8003D200D127D2FD449F485F18
+:1093E00027FA2CB7097190E813E921D24BF1FDF768
+:1093F000A497223D4C7A29D277482F45DA427A2920
+:10940000D23FD4CDE2F4833A8DDBFDB1AE82D38F6F
+:10941000EA96F0F74FEA9671FA973A1F7FFF648059
+:10942000617F08B09DC6F08BD5C01F097BDE2EDBA7
+:10943000B960BFB1E295E7ABE1C7AC5F225A23B098
+:109440004F5BADB1271C9DFEC9EEF9AD559C08924E
+:10945000CB9CE1DECF06F0F8BD5DCCB7F5EF47C49D
+:10946000B43E0584A74FD3B5B3E007330ACA56C646
+:1094700010FFB8EEEB2536D0CB8796AEEFA3EFD535
+:10948000F9DBA703BD6DE8F75AFD5DA66B1D32AE93
+:10949000F05A6B6B3DDBDBBF146EC403ED33ECEFB6
+:1094A000F758F95EB1F285E0FCE804C1F9FA2F5BE8
+:1094B000380EF15A972789CF1D3D6FC40575F8FD09
+:1094C000F11314EF63F8E18D789FC22F5AC7413E24
+:1094D000181D69778785C40DC0DFBE2FEA8FC6BC13
+:1094E000F87D27C3BFFFD4972280F7F20C3FFEB56B
+:1094F0008E9634D81546DFE1F004C73319FE7AE5BD
+:109500008B1615E78911AF648C63CC3BCA4AFD15F5
+:1095100074C6235DEB6ACA475C467D7524F7D79312
+:10952000BEE3DD49AAE755B95D533EECC7A3AB22C4
+:109530003D42E98C13E8A9AF9BEAF13A0BBFD03862
+:109540004E62B41E27817E1CB29CDF011C9D104818
+:10955000C6FB9FA397D83DB0833E8EB8B382CEB8EA
+:1095600005D48F08DAC79827FAEDF715CD17F2BCA6
+:10957000D7CBF09DE692F429DC7A5E3FAF85632C71
+:10958000DBBB543D5F1CE6FA6B04D1CFAD19DA901A
+:1095900081D4DF1F948CCC7CD617327A60DF4F09E0
+:1095A0007947B00BFA1931F0FF847EBC12EFBD058C
+:1095B000DBE142E9C8C08F414F06DEBBA32B830E1F
+:1095C00082E2D018EF1D71657A7FA1F4D61D9D1936
+:1095D000F475AD43D201F08CF82083AE942F9AF845
+:1095E0001EEBE82A079F7F065D85D2C5957425E9A5
+:1095F000B4FE270EEEEF4ABAEAA407C0E587D355BA
+:109600008B8AF3F89FA5A7796D623CEEFF975C7695
+:109610001F44DAAB9FB6177CA64C8C190F12132E81
+:109620007510EC62A1F532BAA9174A7FA1ED6EBCA4
+:10963000A25D466E70BB71FA5919DAAE12ED7A046A
+:10964000B71BC271116FE9F708DE721A712D9E996E
+:1096500090530EB96DF22D2FE18DCC27BA19A7F3D7
+:10966000F34362099FBF24EEFA404F853A698DCBE0
+:109670005DC8FA426164D7710537EAEDC77F5DDCEA
+:1096800080F98C4F30CBE337EAF2FCF5A291FB0F67
+:109690007D47E1C6DCEB59CE0F7D4761F3403DFECF
+:1096A000204DA481DF170A8F9C9FFE0E46A1BECFDE
+:1096B0005374BAC970AB62541CEE9B6A561C32AF2D
+:1096C000E31D8C3C8CEBE3FC0DC2CFE94D22C0FDC9
+:1096D0004CA20309F91F096193EF5FC8FBBA35AAD1
+:1096E000F6DF90578D7BBA4F3BB557B0CF0F444C48
+:1096F0009E83774AC60D19D70FEDF617BA59CEDB00
+:10970000EFC860B913FBD216D7C927DEA473BA5FBE
+:10971000A6BC378A14F746FBD179FA3B3AC791BF0A
+:109720003167B940BBF16E73BC93D1FE26D7386167
+:109730008DEFFE9CBC296F776FD8CDDE8ACD2E04CD
+:109740007EDF8ABDAA10EB7D2BB6A745A661764EBB
+:1097500007BDD2AF2BB9D8A0FBCEF1C6F378DDC1DF
+:10976000D9806B283C0D38FF00B81EEB0AAE7B0792
+:10977000089637AA23245FAD8E907CD580737558E8
+:10978000C77DDE9EC1F127550E09AFF9CBAE11564C
+:1097900012F5172C1BC9F99375C207B89FC69260C2
+:1097A000100FB1F709EB58CE1BEFDC9D7DF8BDE83B
+:1097B000249AE72A87F63F98DFB98240164984E267
+:1097C000E4867ABE8F7FFE05D5037DAA4A75AFF188
+:1097D000C0CEFA962AEF717D7D2015FE58F154D740
+:1097E000F1E8550E095F439F1CD2AF98F7ADB15F0A
+:1097F00085FEBE80215FF50E93F1DCC63DF7EEE4F9
+:10980000ADE1E192AFF50E93FCD8C0EB06BB7EEE66
+:10981000533FC3898FA6FC3A9CF5AB98586F4C2EEA
+:10982000EC8385C2A49F187695F604F97ECAB5220A
+:10983000EB9151942F3C64137E2A6F074340799239
+:10984000F4B3B61FBAA482EF174529FC3E86716FA8
+:10985000292CC922DC417CC2E90E37BD4B1B911378
+:1098600067CA47797A99EAC78C483795C77A0798C3
+:10987000CAE3271498F23D8AAF36D5EF396BAC298D
+:109880009FACDD68AA9F5231D59437F8588AFC24E2
+:10989000FA2CB9C5D4BEEFB25253FD345FA5A95C12
+:1098A000C53B9B3140ABB7252711CF81CA9F8CD5D3
+:1098B0004B43DEE3B508CBF0CE776BFE335ADECBFD
+:1098C0009910B980DFAFC96CFC99799EEA446B2C82
+:1098D000A5D7BBCD7CB128C99C1F17B94F81DF71BB
+:1098E0009CCBCC9F5396584DF91FE5EAFC344FE4CE
+:1098F000B1DDE3BBF0AF0D30E13F144E440FFC7E11
+:10990000683B9DEF3ECCEBCD327E0F077E93E0753A
+:10991000C06F120C07F84D82F3F09B04D787DF2449
+:10992000B81C7E93E0F22187CCF81FD662C6FF55A3
+:109930001F99F16FD06577781AD96AA60FA1299A75
+:10994000F22D78BAE694997E42F1731D895BB109D4
+:10995000C087E209B87F38BE5686E08BF0C3F73780
+:10996000DB7B47317E1ED7D7756D6020DF972E3A9F
+:10997000A40ABC6F63ACF371FDDC3F6DD51A73892B
+:10998000CFFCCE5D90043E769D907EDBF155164F68
+:1099900080BA7F20649CD929DA43A83F2BFE52AAC3
+:1099A0001D74D226DFCF7B0E7C79D895F1B23E12A2
+:1099B0004FF8BEF6CF54BE2775C4D2A8808FAF8EA5
+:1099C000D19E009F9997BB84D79B248AB72F405C78
+:1099D000D47F85A5223FB7AFBCC72D725BF9FE8946
+:1099E000C127E7A6C8B8A92DB9BA7FDD23E3A79E92
+:1099F000C995727794C7C571DE25B9F27E0DA98B22
+:109A0000A97307013E879DD980CF3A0BBFEBD98A56
+:109A10007BE4099DF7C8210F43FEECA3CB7FF51F24
+:109A20003B1C5847F67A613A7FFBFB1DA6F8E281A2
+:109A30005B5DA6FCA0A62453FDC1BBDCA6F2FC40E6
+:109A40008EA97CC8218F293FAC6584A9FE551F795A
+:109A50004DF991AD134CF5AF39556CCAA788B6478F
+:109A600001DFBE8AB4531CCD4D97FAB95B70DCE4BC
+:109A7000DCBB63E57D5FDD7E61C8FB46DCB9A6D358
+:109A800075A81ED1D72EE5E8FA6421F54687AE1FEA
+:109A90000AB33EA1E971E31DF7587CE6B871235E75
+:109AA000BC43EFD0F58A8E7B349DF1E2DEE078F1A5
+:109AB000B9615DBF1F7D5EC77BE8FCFBDAE57AEB31
+:109AC000EFB4F3BD1D635EA1F349C99674BBD9D150
+:109AD000F5BDAABFE54AFB466B66F125D0FD1336FE
+:109AE0004F2BFF6D842BC6F3B4225EB7FE1776CFE3
+:109AF0000AF7778F3777B05CCF1C8B65DE945C8E6E
+:109B00008B33FDDD84884192BEAD8375FB4AC878F6
+:109B1000736364DC9A88B1BB41BFDD8F27E1996430
+:109B2000170D7CFF4BBF67F1E3354DF7A1688EBD84
+:109B3000517F3FCE6F033D4C1C4BF2593EC9135B26
+:109B40007A3D144972CA13CBAC6C9F8A7BFE57379F
+:109B5000FBFA75DE9FE94BFA10E803B20EF4A80792
+:109B6000F25429B70C92EB2B52BFEEB8E7C07E1827
+:109B700021F4F34370BC4F17F4C67468ACE3DF758F
+:109B8000EFC1A0DB503819FAAFD0E33BFB19F3D299
+:109B9000E167EC07037EC6FD13F76DB6E24D917CDD
+:109BA0008F6502E2E50CFC6DC993F6C6053A3C50A0
+:109BB0000FFCA8BB7A456A6E0CECF7EDC21DE3EA18
+:109BC000820E3BEAFF9BE062C0BFBBFB6DDDF1870D
+:109BD00050BEF05DF7DDBAA3D37FF6DE5B109F9039
+:109BE000F14B3A5EFCFD2C1C17707794793F3F32A5
+:109BF00048F2899183F4FDE423FDD6CC2F04FC0FB9
+:109C0000F52B559D5FC8F3BC24AD98DFAFC6F98A2C
+:109C1000FB5BF3374AF94788E2C4AB87C28F6FE337
+:109C2000FBCBD77A05DB6D4A1B153FDEF92AF175B0
+:109C3000AD0FB39FCFCD7207BF3BC8264D6A5746C5
+:109C4000EDF6A55DF9CEFAC248F9EE60E8FBEA0B45
+:109C500075BD192F6A60DF86FABDEE19A4FBB13C11
+:109C6000C2C3F29C1ED750A1D7E9A037BF7C6F0EAC
+:109C70007A32F631A51C1F67C0CD0D3FD490CE3C83
+:109C8000C1373C07E77983B5CBF8C50EF81A7EAB30
+:109C90000EBFEC61BE27111A8F71CE7720BA2B3F11
+:109CA00098E11FEB6E1F74F8C7BEC3EFD61E69891B
+:109CB000C6DFF169DF26DF67E9F45BFD65B8CB221B
+:109CC000FD5331F03FB5EAFD898D795DDD0FD59605
+:109CD000EFE43894668BB67310ADEF2CF58F777B7D
+:109CE000EF89DC9F88771126EA76A92BD7ADCBCDFB
+:109CF000A314E98FF6A98CEFF609F25E3DF15181CC
+:109D00007D67C44F4C118104A4861F4A5B3D92E1DC
+:109D10006FF8A14A0223799E33EA17DAF0E468EB80
+:109D2000A3771585BB3BFD53AD7D645C54777EAA5C
+:109D30006997F3B9BFE997AFE17E3E189426E5B67F
+:109D400086FB6E039D0DD82A6C5867ABADEBBF4BFD
+:109D500051A8F3AB12E89A3D82E2AD962BBC2F9648
+:109D60002AC288BF623E6FE42F35EAF92299BF7D8F
+:109D7000A5CCB7EAEFA76DD1ED20582752AC077AF2
+:109D8000F936DD4E827520C53AF01D7C0D79F0352F
+:109D9000E4C1D790075F430ABE86EFA5A2381576C7
+:109DA0005BF8D30A83F607FC6985417213FC69C12D
+:109DB00079F8D382EBC39F165C0E7F5A7039FC6929
+:109DC000C179F8D382EBC39F169C873F2DB83EFC28
+:109DD00069C179F8D382EBC39F165C0E7F5A703944
+:109DE000FC69C179F8D382EBC39F165C3E6F996220
+:109DF000F2B7CDD3DF7F285B1FCFF45198511C9B66
+:109E000047F8FDEF887FFCC4960E3C372F02DD2E0D
+:109E1000AD0EF7483C374E9078B70889E7B6D98C35
+:109E2000E7BBEC325F24E3B443E9077EAB429BF42B
+:109E30005B2185DF0A29FC5648E1B72ACC947E2BAA
+:109E4000A4F05BE13BFC5648E1B7420ABF1552F86B
+:109E5000AD90C26F85147E2BB483DF0A29FC56F8BF
+:109E60000EBF1552F8ADF0FD08CD03FE2B635E90DA
+:109E7000F3FB99F452A243935EEA32E521E707D758
+:109E8000879C1F5C0E393FB81C727E701E727E70FC
+:109E90007DC8F9C1F94983DCBCBF20EF07B783BC9B
+:109EA0001F9C1FD4E87B03B6AB491B2EBC8EB43578
+:109EB0004A7942710931352F7326FC8BAD4E253519
+:109EC000D623846DF980998594D7F438C73CD16640
+:109ED00001BE39AE80F0A60504C7650FFA7FC95CE4
+:109EE0006EF8B3F987F09EBF43B0DE50A3DFAF3505
+:109EF000DA7B844B456AD4EFCC775D2F747CA31E4C
+:109F0000F3CBA0799062998F7893FCBB220B70AF52
+:109F1000608B4591F1B82B643C74285DADCA93E722
+:109F2000FB16CBF6FDE1885329513CB8EF9165153E
+:109F3000876C0580D392027EF72A2F565FD792ABAB
+:109F4000118765CCDBB04B129FE07B86A3DA84BD22
+:109F50009CC619FD85B0E3EF734CB44B7902EDA0BC
+:109F60006F0EF429DE4D41F4BD2C4F9E7B9AEFB667
+:109F7000ABCBE9FBC06D4BAEC6FDC589E1B2DDD30D
+:109F8000BF8966384E6E50F89ECEA86DC28BFBC955
+:109F9000CB757E3A709BCB5ECEE3BAF8DEA3D16F71
+:109FA000C98654BEA759225A0B710F450C55F83D6E
+:109FB0007C036EB4BED7B1BE2CDA2AB02FFFE0FB13
+:109FC0004F242E7E9FFB4FA387C61621AE5034CB65
+:109FD000F742270D2D59D983E6A5F9E57BA1A3BF4B
+:109FE00058F206E79F92EF8532F90CE7F9F179987C
+:109FF000ED53F8FD95C9BE8D960437EE652FB72554
+:10A00000A2FE36E1815805F508F78A8D75E58A16B6
+:10A010008B5301BD8803F141F4479C633AE825DF87
+:10A0200063E3F759A6585D36F01B43CE2971C9B1D9
+:10A030008BD451317CCF32444EB8D4D083E3627E8E
+:10A04000789C4E3BDFE75FBAD3C97285B65E61BECE
+:10A05000793E5FC6BB56DDF6E1704B7A679CCE99C0
+:10A0600034FF16BC037B267D7BF40885E588BD792B
+:10A0700004D7A30D2FF13DCD92956FF03D944B0D7C
+:10A080000F45CBFB6CD2FF52AEC3CDB03BCDD7F169
+:10A0900053AEC7691DAB93EF3AD339CCEFAE5C6AD0
+:10A0A000B0B19C112A2F1AF2A7F11E9110AE3FC237
+:10A0B000CE53D160E33BC00BD794AC4A1257CA9140
+:10A0C0008B75397351838DE3B22AF4F7D442FF6E56
+:10A0D000CF623D1E6BF156F3F74FF242E450E37D41
+:10A0E0004DBD4EC9DB0766B03CB4C4C6FECD39CB0E
+:10A0F000A57C24B60B3FEE93CC593ECE82F766E6A4
+:10A10000ECF47A942EE8E95D5D4E9AD8EA64F84F53
+:10A11000B91CC1FC65EAE514CEDF7C3999D3999767
+:10A1200065DC2AEE22816E5A8BE43B07EFEBF2D11D
+:10A130000CC4B1C6433EEBC9F4DD4EF48D21F2747C
+:10A14000BE35C0AB1C807838D1A6AD449CECC48D24
+:10A1500082EF834D821C45FDCF825C158FFD9156A9
+:10A16000C4F76126287CBF68D2D0DBF4FD40FB43F6
+:10A17000303FE1F757B4C2297EC439CDD2B65B80F7
+:10A180007F635F68BEA3FC5EEA249F62C73B929A2E
+:10A19000AE6F1B741FBA3FE646E876B2486907EB1C
+:10A1A000B09361B27824C9B76A26E4D3B9B06DF62A
+:10A1B000D20981601F952BCB7BFC76D5CC069241D2
+:10A1C000FF55FBC91C8B45DE3F233990EF0B88966A
+:10A1D000A29E942F59A314403F32E6F5B967EC389C
+:10A1E000CFB04E3A28EDD8A7F21EE5D27B324D7E95
+:10A1F0009BD0B48CE08DFD3437A6F5270A6168F456
+:10A2000060E12D1C81F7EB85F1285400F198B7E847
+:10A21000F9EAC13BFFB43A97E1C4F991BF7D68A662
+:10A220002FF25FE09373146BF0DF1B4BB268570D96
+:10A23000EEC1F750C703BF11B96DFC9E444AB64B3F
+:10A24000F2A9107B4BF56089C750BB4B59AE3C77E8
+:10A2500084D59D7A2BFB7BDC6CB734D67DCC66BE77
+:10A26000E76BA4F307EBE75EDDBFE79ECAC316F911
+:10A27000FEC26316FFF657885E2FF7D06660BD8F6B
+:10A2800021DE9EE7AFF1FA8CF74C3AF895FE6E8925
+:10A29000414F47965DE2FB2AA59176B71A444FE5F8
+:10A2A000AB15BE0F5ABA4CDEE7D6562BF25D846E64
+:10A2B000EC58BF99FDBFFC9ED56F7E112E0B75F833
+:10A2C000CEB1B7BCE148EB84EF9F973D60937C34FF
+:10A2D0009089FB0EB72C71F2BBD99F7B8AAB060F1E
+:10A2E000039E3C8CA771D8E5547F4B8CB604DF4BA2
+:10A2F00045CB41D81DE7FEFC6D7E8FBAB6398DDFA8
+:10A30000BF2CD995BF0AEFD97CEED17E82F5974458
+:10A31000BAEC90476A1A62F97C9EDB53BFCF2BDA06
+:10A32000D8CF67E0E7BEC1D28E777DBE1CE7A2AE74
+:10A330005711C06C534CF5BAB6631AF6D1503B4B6B
+:10A34000E8BB21DF655781DDC41E645F35EC32B6A2
+:10A350009C63B371AECFB177FDF73EF7EAF337F404
+:10A36000DAF91D7A6DEEF89E90FFD72A2ED8D3CB5E
+:10A3700023DD3371BFA1FC900D91B462629C5BBE82
+:10A380001F738F7C3FA6F48E7CE66773809302DC9C
+:10A390003B19C9FBB8DC4FE990EEF7FBAD6B0FF44E
+:10A3A000D90D7A0A78F91D827297D71E17241F9546
+:10A3B000352AA677248CFC0B8355C99748DD00FC11
+:10A3C0007E7C479A1D6F39CD213109F1997B412758
+:10A3D000C33ADB513D8E3F99982E0ECAF7BD14FE4D
+:10A3E000BBE4182FF8EF5B95369ADFC3A0FA2CDF99
+:10A3F000ED1A1CC5FD95B868DD69485D3C4F8203C8
+:10A40000C3A9ED3EEACFCDE3303ECA027E1BEC0786
+:10A410007310F742F95B5C7E1BC6296D90EFD46820
+:10A420006BE438DAEA58FB20C8075697BD4FB05C9A
+:10A43000D820DFBD9EA3FFDD119A2FCBCDE50427E9
+:10A44000DCB333EEDD86C2AB449F7F7963AC59CE7B
+:10A450006C5C6B037E6677F35EC639DD0E5DDA30C9
+:10A4600086DF3728B77AF9BE8AA6C3FBB3DB9CF731
+:10A47000C25F327BDD23B634CAFF65B0946BCFE98F
+:10A48000FB71627A2093DFA9BACDC9F1E3B35D8D88
+:10A49000BCDE0E783F44F081DCE22A6678139DF83A
+:10A4A000106F59BECE8CDFCEF944C977FCD795F03A
+:10A4B000FE5B60D5ECAEE079ACDF9789F8A1D9B44A
+:10A4C000EFF10E9770697C1FF6C44333F9EF056214
+:10A4D0009E1CCFE6718FC7BB5344374CD706FD187F
+:10A4E000F7F38DF1AC1EABB4C77BBE6B9F7A0F4206
+:10A4F0004EAF277CC30FD0DD3EB5E302268D6B2F18
+:10A5000097EF075EC1EFF4FDFAFF016A916CD3008B
+:10A51000800000001F8B08000000000000FFED7DA0
+:10A520007B5C5565BAF0BBD6DA57D8C0668BB051A4
+:10A53000C00D0262116D10101575A1805B736A6306
+:10A540003729C48DB7500191ACA89FF3B10D6FA905
+:10A5500095262A9675B6A68D957570B2461B9BD921
+:10A560006A9A5D0F3A8DD33953B6CD32BB09D234D6
+:10A570009F7DD399BEE779DEB560AF0DA475A6F9CE
+:10A58000CEEFFC3EFCE3F57DD77B7DEECFF35E7630
+:10A5900022634CB23136789883B1818C1918934577
+:10A5A000C83FA177FBED02639571ACBE2D13D22895
+:10A5B00056FF6B0B63DFE3DFF89E74A253642C8FAE
+:10A5C000B1DBA05D1B7CAF10D9ABCCD6F33DD3295A
+:10A5D000D0F78A1436D31DD41EFBC37EE3D5EF1308
+:10A5E000FC698B337BEAABE356D878BBA9D07E9A63
+:10A5F00005EB8BDDF51BA83ECFB3E92691C53236BE
+:10A60000DB04FF87A594487B56C4E632D6B057706A
+:10A610001AA1A8E14189B118489F8BF0B164C6BE68
+:10A6200068F8CD3BB740BDCF376FAF64437BE635AD
+:10A63000C73F8A39463036F75236730C606CDEA558
+:10A640003194560FF364380706D5DBF85CBA07C6B9
+:10A65000BFAD2DFBDC7F305AB79FE530F6FE73BFF0
+:10A66000FDE368E897319FDE7D4DCF3A66AD3EA1B0
+:10A67000AFB204C38DAF734D4657158379CEB6186C
+:10A680001C1214CD5E5EC5649827B333671AE413B9
+:10A6900075CC2B42BF6CFD16D904EBF330FE57B5D9
+:10A6A0005C90A95D63BE4F82F50C867AC61C5EDFA6
+:10A6B0000CF0F7580C678448A8E82D910319BCCD1D
+:10A6C000F7293DF81D0CA921A707EF890A1DCC5ECB
+:10A6D00057066D7BF0050333960FEB651CAEEAFC65
+:10A6E000A72AF3BF6DBD20FBA0DE0D4E07CF572775
+:10A6F0001BE6C17AE7AC4F36CC86B45CF95E3E47C8
+:10A700005BDE8D2FAB8AAFCC9576584F571BC75762
+:10A71000D73A3DE1AB6B4F2F7C2531A9671E7700FF
+:10A72000BED8008E2F3682E30B53C057A5332FA817
+:10A73000DEBF707CCD7EFEED0F5E76D0FAA8FFCE38
+:10A74000078DBE1DD0FFACB6BD84B7F2D51BF4C9D2
+:10A7500050AFCE994C7051DBCFAECFB63280E76DA3
+:10A76000ABB7EB1D16FCEEE893EE219559103F4177
+:10A770009E099067BA40BC3BA2A77E39A47B619C2E
+:10A78000258BCD91ECDA9E71B628F43CBB3EDA867F
+:10A79000E3CDAEAF7A886571FA7767F6E6BFB36648
+:10A7A000CE17B3A03FE4CFB345CE24E48B0A51D4F7
+:10A7B000F09B9A3E847883793D06E03523FEC3DB27
+:10A7C0009E46380C5E14E66C864FA9A9011F8E8B3D
+:10A7D000F48CF33688CC6B827AA935818B388F5410
+:10A7E000A0286C8769848D52160BF91D30ED024844
+:10A7F00053249EEE73F2F5C3773F7E6731813C5C54
+:10A80000BF4ACFA1F46A603B57A700FE0D31CCD9F7
+:10A81000ECE8A14FB51F953E55FAED6F7D7BAE700C
+:10A820007D6793393C598633C904E3563E3CCCB925
+:10A8300046B8FC3A0D61000F5BD07A81580B6C7DF5
+:10A84000AC3735905776CD0FADB7A524B68FF586CA
+:10A85000AE53E5933926CEC3C02751019877D7FA76
+:10A86000A1510CF12D302FCA9DB38BCD22CE5B5D53
+:10A87000D7534D5019E6B6BBC944E9334DC068C340
+:10A88000003E4D76CA3FDFE4A0B4AD2983CADB9D0C
+:10A89000369A3F6381886980A78A3085FFFD3C8FA7
+:10A8A000E56541E5536D9CEE4E5B0311B62039FD25
+:10A8B00071BD790D8B42FA0E3C88FCCC1A87B25DD3
+:10A8C00030D4E9F56723C44CA44F3E3FB5DD127D7B
+:10A8D00027C93F166170EC02969BB124FB7423E0FC
+:10A8E0006BEEF2382790129BD13894E4C20C6FB40F
+:10A8F0009300B07E0B4378CC53E460F892AA952382
+:10A90000B17E6BB2558071E65A9CE75AA9FDD5CE4F
+:10A91000FBF17B4B99212593AACA26906377287275
+:10A920006C89C0DCC88777A09C44FE120FA5A2FEEC
+:10A93000B9A355F01B29CF560B00D721CDEED27805
+:10A9400094135B05E70E6CBB0DE4A9A9479E760D39
+:10A95000737F817A817D07F407FD5F252002715D99
+:10A960006D721CCAF14D827517C379B90D089F0528
+:10A970000A9D9C6E3913E1C8EC81EBA3F85F10656A
+:10A98000CC238B286F1B143D86644079454E0E31D5
+:10A9900070F841CADA113F3AA709E9A0CB9212C573
+:10A9A000FA286F884889C3F239AD12C945959EAA25
+:10A9B000D535287C3317BEA3DE2B912A6291BE5673
+:10A9C000B64CA474CE8692CD5EA0E324C11D3B9A02
+:10A9D000D6A367B89E39B513AF47BC55EF30469B39
+:10A9E000006F497A6F524E103FCED9BE2A8941BBC3
+:10A9F000F3DBCDD351FE175BCB8AA3A1FDBC6DD198
+:10AA0000D952901E49CAE67A6441EDC43806F0ACCA
+:10AA1000F9FB9127ACA08FE7429F56E8FF9BB670E9
+:10AA20009F17AAD434ED4F9280E7DE3179E2B3A1CB
+:10AA3000FE42F1E02DA3501F08BEA7E2A9BE23CE1F
+:10AA4000DA873C50D373C00F0EA0F7DAFFF51EF57E
+:10AA5000F395F8D6F5E5D0BEA6F68548EC67E1A6F5
+:10AA60003FE45BA1FCA0E849C3FE3F17B63F654544
+:10AA7000026CDD9E857A7CEEA6B4284F1FF217F992
+:10AA800000F151BD5F20F8AAE5337C510684BBC7B5
+:10AA9000CF0C564CADCC80F47E5E628D680FA8F66C
+:10AAA0008C5A3E329BCBADF351EB93904EE63FB5C3
+:10AAB0002509F5CC67113C5FF1D4AD6FA0DCF2EC59
+:10AAC000341A10AF1E1D3338519F7941BF221D55D6
+:10AAD00003FFC693DD61AE047A2ACA0E27B8CE6F93
+:10AAE0001D41FA519D177CA7F2CF74CC85F318D283
+:10AAF000DC998D74FF679D7F2EE2F3CFF566A71773
+:10AB0000F199CDF5DB9FD74BA558EE0586417BE447
+:10AB1000CFEB5F8848B5F4D86F25D2FBB28476D6E8
+:10AB20008B4236EAEDF0CC76C32CB21B18D1599D7E
+:10AB300095D359C3017DE9E018B2C7A8A446E73709
+:10AB4000F485AF058ABDD59DDFB7D7807C52B3872A
+:10AB5000DB11356D67C88E50ED925A859F17EE391F
+:10AB6000437685DAAE6E1F874BED3E5E5E9501C87B
+:10AB70001DCDE5800042BA0AF105F9FBFEF5D7D3F9
+:10AB80009769F27B297FDFB5562E0F759D49A8B7CF
+:10AB9000D6649C3420FE6B972BFD425E1F34DEBCD6
+:10ABA000EC81042F2C1F6AC1F60E8DFD50BB2F9A2D
+:10ABB000DAFB6BC356A3BE97EB2C3A4C9B6B2DA4D0
+:10ABC000FFB7D58B19BA5C9C5C9813EDB983619182
+:10ABD000592847072E3C650648026A3B8F8850BEBD
+:10ABE0003ACA732FD2671C03AE90506FF805B45F5A
+:10ABF0003B5EF97404F63F6E48E06B0653D70BBF1B
+:10AC00009B5E0CF26419982D641F670646201D0F89
+:10AC10003CCCE5F4E37AB61AF51BD3B9D93428F75E
+:10AC2000A3DC423C7F1BE6DB05FFFF1DF30FC6FEE6
+:10AC300099C93F14DBBDA4D0A7DB68592DC0BCAEB9
+:10AC40001EEA59834BBE41D05F932D220EA434AC33
+:10AC5000D7A1E7DF557B758222A713C18E40BBC801
+:10AC600030C86E413A6E36F3F509B2CC1A611EF760
+:10AC7000671E9E8D7A7A6DA78919619D133AC3C8A4
+:10AC80007E4D1CE422BDD66C4E22BD2D3874AC0224
+:10AC9000EA1FCE14FD3AACCF4C3EACCF4C2176AE81
+:10ACA0006896B19D70F0B56F51BE0F962E1E8982C9
+:10ACB000F50DBE477036439DCAAE738FFF1BA415BA
+:10ACC0009776ECFD5748FF2DCAB313E17ABACB75DE
+:10ACD000C603A85B6B6D3339B9DE60C1EB3878EF22
+:10ACE000B79136B1677E1D9DE79EFB4D2EA62627A8
+:10ACF000EA9F090725D21FA1F3E9B0C3C487523DDB
+:10AD0000B23B3B2CA24F10B0FE91F7707E134C1655
+:10AD1000BF84F6BA49FF65B07E618EC4E87357936D
+:10AD20004A61DF8391108B93477D74D14276EB3873
+:10AD3000850F553A7B2B9BDB8F6F297255853373BB
+:10AD4000C82C58AFA8F06CD6ABFA2210CE327BF8E4
+:10AD5000769152AFEB9228931D5E6DF431E8B2EB21
+:10AD6000E050D233FDC9D93FA0DD01F6C4F254F959
+:10AD70005D842753F4EECD0AFC54FD2D29FDDFAC94
+:10AD8000C0F1668BC8E1765308DC147A0AA5971ED9
+:10AD90007A8841DBA31BCFECBEF6A351C984DF6BDD
+:10ADA0001EE678FD90F0FAED5B2B80CDD8A0BF4D6C
+:10ADB00021FCFE0C78F58BB93F02AFEDA178F59B35
+:10ADC00087215E37896467A01D8876A307E5C0B533
+:10ADD00094E7F66006233951298539D724E3778033
+:10ADE0004316C987A3281F54B930C415B806F5E91E
+:10ADF0006970E5717E01B18D97E7A4105D24B0F60E
+:10AE0000782C07BCE7A17D279986667E0C72B7E592
+:10AE100001DFDEDF403FCD826FEB3C988FF7668B22
+:10AE200013EDB70E9FE8D5C33C5AA259D67E18BF82
+:10AE300065FE554E2F9633456E4C37F8D07E83EF26
+:10AE4000498DF8BD9C7F7FE9EF671F44FBAC338DD4
+:10AE5000D1BA5AB2593ADA672D6519F4FDB7AADCAE
+:10AE6000793082B72FE3F4DD32DFE6433DF4E8A327
+:10AE7000BEE1A8275AB6CBF136480D519EF81C9872
+:10AE8000FF2089D37D4B329443BA597097CFC57E4A
+:10AE9000AEE1F30D94873DFF1474654E05D106E5D0
+:10AEA000A71B2376A05C55E974F0302EDF8778CF9E
+:10AEB0006C45387927B08C7AE8FF4385DE54F80B6F
+:10AEC000C0368D00F798103CA87417A3C05F58CA0D
+:10AED000E9CF3B41594F1DF3A1BF910053090738FA
+:10AEE000571AC1F0837496D5938DF36F5E0CF89169
+:10AEF000701D1C0FA74556DDD6075F15E628F10D1E
+:10AF00001802F9A69271BEA944BA427A6C04BA0A30
+:10AF1000A2471648883E17AED015CA8308F7B81C5A
+:10AF200058E757C21FF2B1F0ADFF94A6F735CEA493
+:10AF30001C2E2F1E337B4A7348EF4DD0D89D6F6572
+:10AF40007F9A88FAE5F4BDAF25609A14E59E8CEBF4
+:10AF5000D85CFED75214FF1FC607F4B88E0FCBFF84
+:10AF60004F22DA2D954B5F23FABFD2799699983705
+:10AF70001CE01E5D2C38FD00BF792D46E724F81635
+:10AF8000575C750CE159D66A74189156D8628D1CBD
+:10AF90003B2B8F40378A1DDA6A24BA39F74B89F484
+:10AFA000C1B9928BAF0E800FE756084EAC57D63220
+:10AFB0006C2590372B2916A85E9957A07A65A91C95
+:10AFC0005F271A05A23740AF253B28DE31A7F58E53
+:10AFD000A988DF13C55F0FA4F8C17A1847E5632E6F
+:10AFE000DE489E9529F5AB561B9147BBBF97B5AC84
+:10AFF000BA88FC3FD31B52DE3AE953ECB7AC515B45
+:10B00000EEC635821D77574E440CCA07E664CEEF74
+:10B010001148F240F20FFA93BB407144CF300FC297
+:10B02000C389BC617AA4EB990857A0DBE8A57CDD55
+:10B0300033A70ABE49B0CE9916CE671F9609BEFB4C
+:10B04000053EFF0940EF65501E0B745D16C3E438E2
+:10B0500048DD26E60FC7792E1DF609CADBD338D4A2
+:10B0600028AAEF8FB4A15CF7E81189B7322FA5E5C4
+:10B07000CC47E9EDCC4FF398C13A937490AF93FC71
+:10B080002B318EF32BB36703D2D75F8B4E9C16E028
+:10B09000FBDD3942DE2894438D0368DD975B1F702A
+:10B0A000A5807606AA41AC5F96E37E14FBB3CA4C3A
+:10B0B0008F71AB74958E5A993715D617BBDEE29B0C
+:10B0C00004EB8B6BF51CC2F5A64F373810EF8313DA
+:10B0D000F83A1374DC9F3F546E60A3810E363F181C
+:10B0E000E6433ADBBC3520DAA1FEE6038001CC97CB
+:10B0F000AF14BCF0DDEA614E8CD359751E11EDFE24
+:10B10000A2568F1808E2A7E1B241443991BED32379
+:10B11000A29EB45AD7533D355FACD44F3779065908
+:10B12000C94E9E4EF4335CA11FB59FD456835F0475
+:10B13000B817C94A7D99B757FB618A9E56DB6139BA
+:10B14000D2677AABA34F3F454D5B503F838FF808E2
+:10B15000C605D27BCA1F71FDDA84F01B78F3AB36CB
+:10B160004C370321F8711C9DC74CE379F83CD3158B
+:10B17000DA87BFBF7F8FE3631EF0BBB9F5FE22E421
+:10B18000A3CD001FC4F3E69DB3CCD4CFF4599A7974
+:10B1900031A986F22508074BEF753CA2CC2F3DD58F
+:10B1A000235A69BDCE4368E7A5CB8CE2016A3F769E
+:10B1B0001D7405F46A777A857ACCCB905A94B84797
+:10B1C0003A8EB34E40FF315DC157496BFD6133F696
+:10B1D000E366145F4CCF85FEA1FE268483A137FC75
+:10B1E00042E7995ECCE77342A9DF8EF194746CE775
+:10B1F00058114374C5E7D7D5EA14621C97B18FA0E4
+:10B20000FDC9907E9EC2B80CA4CF4E7E6D4A2EB46E
+:10B210007FFED19776B4D0520E3EB30FE556ABF514
+:10B22000E69B709C83229FFF4D72E25D98DF6D204C
+:10B230003D9ABE534EDB44799313FDEBAE56DF557A
+:10B240002F42BD2C18C664EB3D8F130A9CDA153AC9
+:10B25000383979CB205CEF5345772C5802ED875F66
+:10B26000F7388D3B7CCAFC9416C80F9BF8CBAB30EB
+:10B270007F5F8EC73C02E4FEB0D25FDEB60FE56AA8
+:10B28000E9FC1C8297C57645F2A939DAE3F502BFDD
+:10B290003747DC528EFCB8D26670482477EB19FA37
+:10B2A00059CD1177DBB1BFE5D1F9264C0DD6BF36AC
+:10B2B000A19C3C6EC931211E9A2D131896EBAC0A45
+:10B2C0009EBE1B4FFA40528872778473BA4C74E565
+:10B2D0006428270C0906ADBCD671792FD91D3EB460
+:10B2E0009FBAACF54881CC600954A07C935479692D
+:10B2F000717A713CC9E2B4A3BFB44291372C86AFD6
+:10B30000D36039F79F38AF5EFD632E96504B7F8632
+:10B31000B0CC2841F93FDA9BC6103E575383C5BBDA
+:10B3200018F544687F5D2070508EA34F4776337EBA
+:10B3300048EEDD5EB21B347AA45B5E7AA2F521F2A0
+:10B34000521E817AA2582079E961EB0CB8FE120CEA
+:10B35000B2005C3CDBB85E54F97B26CE05F0E549D3
+:10B3600065915C5EE9E473260EC6EFD1AE5C2A45BA
+:10B37000221E025EC9E0E9C39FF778937F501E9DAD
+:10B3800041FA87A90790FE21FD44E10F8F8A076FDC
+:10B39000D9F5A3505FCB12D90395CB8536B4CFE254
+:10B3A000BCD14769BEC5DC2E6897BFA6F51C2A89AB
+:10B3B0004B44797962D999C7EF41BDBE299CF4FF0E
+:10B3C000A4A56756603C6EA657701A21EF591A7DE6
+:10B3D000F77B986F343A5D903FABF081FB974591D6
+:10B3E000684F08B8CE8C9E75561632839BE239F1B1
+:10B3F0003396403B4FA3E0343B7AE0A1C77A52EF4B
+:10B40000F505BC3746FED0FA3FBCD7A8C859773EF1
+:10B41000CAD9A2C6E4870A705DEBF57C9E8DD1D7B0
+:10B4200053DE27393976B91C9EA9D83F9EA5B3575C
+:10B43000C6C3F7C06A41F9CEF156A9C8E540E38812
+:10B4400063183F0D2C17483E79BC52A21FDACD5C21
+:10B450009E4D78EF280A905DD8E53DB4925A2B7244
+:10B46000DEA37436178C58946FA7DFE3FE9F47FE68
+:10B470006325B69BD3A2B5832602FD0C40B8BC67FA
+:10B4800026FDE9F196D1BAEFF04569EA55AD8ED3C4
+:10B49000E43DAB8BAEC7B0E7AC7B27523CAF9239F3
+:10B4A0002291DE2A656E37C19F251BE633579D4FDB
+:10B4B00031B7C72A8BC17EA2EF5A7BB0C7FE893352
+:10B4C00020DFA87854F1133AEF5E7619E376D0AC1A
+:10B4D00075DA7ADD761030168ABACAE5DA76BF32C6
+:10B4E000BB9F45B9E8DE38E01BF2ABAE501E828050
+:10B4F000217F6E26E3711FA6E843D5CE2F597A51DE
+:10B500008F726866E3453DC273E6D21FE6A75F38D7
+:10B51000B5F3BEA1204ABB3E394E93BFD13544534B
+:10B52000FF66F730CDF75BA75FABF95EEE19A9C9EF
+:10B53000DF5E3D5E537F46FD24AD1C7A379AD6A36D
+:10B54000E2A7BF79BFA5E8A37742EC12359D3AE2A6
+:10B550003F1391BF3F2C67E4BF7C7833D3F8311D94
+:10B56000232482E7805C3DF931F7E5C8EF8F20BFE7
+:10B57000C94FF4A1C2F34373A1C928A27F62E47E3C
+:10B5800079A85F729039505ECED4B1FD42548FFFDE
+:10B59000670EF39CC7FEBAE30D4B0FF17843881F8B
+:10B5A00073A578FF7006CCBF0F79794D2EF7C316BF
+:10B5B000EE36AFFF38088EB56DD19AFCA2FDF1EBE7
+:10B5C0003F0ED63B4B041DAEB346E1935A16A07D09
+:10B5D00052BBE8A0FEEAC4402CE63B58676CB4F4CA
+:10B5E0008F838B0A0F808F253728DEA9FAC33F1976
+:10B5F0003E450A9ECBB4701A93CBE3905F8F10291F
+:10B60000DD9C23C7E7FE03F11CB49EF4DCBC7FDCA9
+:10B610007A2247C859089F9F1BAFDFE31E0F94177C
+:10B620008E900B7F26B84CFE47C2A547CF472FD838
+:10B630000DFAA3729D81FBFDDE335CBF3772FDFE08
+:10B640007CB48FF6879BF344E70E07ED97D23EE973
+:10B65000A17B8D611918DF59A1237D797A99908199
+:10B66000FEC226218CFC360FAB4816C8BEB978C87E
+:10B6700048FD31AA07EDFD3A90F351053E6B09E410
+:10B68000DFCCE571B1356E714A8A03F5F61FAC1E49
+:10B690008A8B7AE2111E9EFD30E16B69DF45EE2B4D
+:10B6A0007E12D06BE5D112858F5FCCD5D13A1F2E9B
+:10B6B00014B99D942ABA701F6315D8A968570696C5
+:10B6C000EB285F91C7E9596DF71F0A9DC794DD14F8
+:10B6D00086F388DA24BA7D7D8CFB512E8F0F3D795D
+:10B6E0005718EDB3012A7468EFDBBDD6692E58AF49
+:10B6F000BDD0968DB6DFDADC68EA6F4D469715CF80
+:10B70000A1FC8C7478CA8EFEA0C0FA8C33CD55E6AD
+:10B71000ABEE0F5894FE36E941BFA29D2298281E39
+:10B7200061F11AF9F91567B126DECA1C020B6EA782
+:10B73000D6F328F46AC7421BE197F6EFD578B15DDE
+:10B74000A117A41BC4BB4ACFA1FD8389EC8DCCE912
+:10B7500089F3D915528E1AE5D98D748FFDEA901FA1
+:10B76000BC5CFE076EBEC4E32CDED7DEC37988E185
+:10B770005F529C0CEC4ACE5F4B43E2BE3F914F02BE
+:10B78000660ECF4084561EDEABD0C9DA7F82DE481B
+:10B79000BA02BC3E9CCBE58FABC0FD36CA3BC7B2FC
+:10B7A000D430A2FB1F0B2796604538515EBA723821
+:10B7B00079F33D1F109E74CC6FB4717F0BF9E17269
+:10B7C0007CA4C23149649EBEF4F2883CE5FB1BCAEE
+:10B7D0007EAEB76AC80FD9612877C502C6D22CCC15
+:10B7E00061BCB6FF7A0E9C8F85E86A39D2E5AE96C9
+:10B7F0009430E4CF6465BCCA9BD2A70C77A05F20CD
+:10B8000018D00E04BFC3C0E33FDC4E57E57A4FB9F2
+:10B81000D67EC4724F668F1FA6DAF7EA773C97820E
+:10B82000E3AAF359A5D861FDCD7755124B72A2DC7E
+:10B830005A768F80F0DCB15AD4F87D715E612503B1
+:10B840003F3ECE7FAF13FD8E38B0AFCD28CF75F51C
+:10B850008233085E817B810A381387F82BE04FE240
+:10B860003ABD67895E42C757D7B1AB858F1BE75D8D
+:10B870002CC8909F54512FA0DFB756997F5C05A329
+:10B88000EF69993E01E3219E16568AE3555633032C
+:10B89000C6F52A33995386F2CAC64374DEEDB9025F
+:10B8A00039256F20C94F3A4FE32AF0A4E7011D4D17
+:10B8B0004D28437667B84B86F1897F161DA7B54C96
+:10B8C000F0A2EF59D4E23C84FE01D011C57D3C2D9D
+:10B8D000011A5FE7E571725D8BC1E98075488D657E
+:10B8E000B4FF21551B9C32D43BB629DF8FF1952D37
+:10B8F0008DDCDF0DF59374D6FAD7C3D15FAB109909
+:10B9000044010A792AFA5956852E5630773BEEF7CC
+:10B910003319FE41BB48A5DC5A3D6F2A6622E5D0AB
+:10B920007883DC139F409E6BDC40B2D394AA8D6772
+:10B93000482D2BC9AF33627DA8AC0F897748D5A5B8
+:10B94000141797ACDAF25BF32262088E593C1E9E04
+:10B9500073EF888DB7C27C727F79E31F303D8741DA
+:10B9600033805BFEB23B074C87FF16ACD87823A62A
+:10B970004FBCCEE89CC18FE057668CFAF1FCFAE828
+:10B9800095F2ABB2260FD0B9C2AF7DD2BF1A4F0924
+:10B99000E54F95FE43F94E4DD75E867FD7260512BB
+:10B9A000910F4FDF3B3203DB5736DE73C8C7885F2A
+:10B9B0000507D077A577711123BA605697D05B5EE3
+:10B9C00084370B49ECBF371F3F867C3BFEEFE71304
+:10B9D0007F08DF95098CCE6381FD49F69C9AAADF2A
+:10B9E00023F2B93EBD906724BC4E46C10AAC3B056C
+:10B9F000DAE0BEC778604E2BA47F2EF03C8BE34D7F
+:10BA0000813C9EEF7BFD406B0CAE374BC7F58EA79C
+:10BA1000DB8EE67648B7FFA8D80F59063605EDDC71
+:10BA2000C02611776E59E0C0E73BD6E2BE6BB9C9BC
+:10BA30009906EBCABADF48F484048AF6519668A7DF
+:10BA4000B8E5AEB68FCB699FB1D1C0D2286EE00EFB
+:10BA5000C3736400CFB0AA4CB257C3AC68AF7A8549
+:10BA6000A4AA881E7B08F5220AB42CEFAD53AC3093
+:10BA7000FEAE42B047337BEC1CD5FE599C9F4CEB8D
+:10BA800057ED2068C7B0DD8FE5A74A0B4B22BB19E5
+:10BA9000E683FBF7B64C2690ED1352FFF43223D920
+:10BAA000AF76AF7BCA70B45B97A7E6A0DD0AE39AD6
+:10BAB000246E7FFD3BCA67BB4EF95E28E6E0B949BC
+:10BAC000751F800574D1188753EDAAFEE7A563E7BB
+:10BAD00054B905957F9B2F9FC17EFF5972DD635539
+:10BAE000E84D4D63F879E0E90ABD8DCF37539A9E52
+:10BAF000FFB3DB73A7AE93FE79EBFE39D7E1FA9F74
+:10BB0000B18ED8FF21F8D83CF97FC63A6E99F24F32
+:10BB10005C87375F6EC8CF4379D646E788EC2E7EC8
+:10BB20002E1CE4DE3DBC9CCB398B930964C7FF74AB
+:10BB300079D784FD9D411F1CCFA17877083A1867FB
+:10BB400088A5A188ECCDA58CF681862CE5FB404329
+:10BB5000963A4D22DA03166E270E52ECCE414BB9BF
+:10BB6000DD19A79C2B888B117D32D43FF6CB5BCAA5
+:10BB7000E7C6E0BE9091ECD5E636DDF516D4535E0F
+:10BB800089CE8F86DA89D2D2954A9C5F6B9FAAF6BE
+:10BB9000681AE379FDB2B3B44FA7DAA34394F2B4C1
+:10BBA000A57C3F60488BD61E8DABD6DA8FFA82100B
+:10BBB0003B73A9BA7FD049EBD32DD7E9F1FC7FA81D
+:10BBC000DD897BB0A81407AB7A06B4FE4DD730F6FA
+:10BBD000747EF7F98C1CDC1F9AB95AD0E83955CF1E
+:10BBE0000224287EA4E2E343D473883FF734B55F90
+:10BBF000D26F3EAF48704C2E4FD79C5362EC7E1EE6
+:10BC00002F71733AFAF5EA116BD1AEDDB7EEC63794
+:10BC1000317D69FD9DE1E504AFF5546F7FCBC6EB47
+:10BC200030FF5076BB3D12E6F5D0A853EF09D0EFB8
+:10BC30006A3CE385EBB378298FB6149E8BD0B37A38
+:10BC4000DADFDBA40F4C9F0DE52B12451C91BE23C0
+:10BC50001D9832189D9F3059787EF5358CEEE33073
+:10BC6000E55C9F1A87093DD7B7CAC3C75905F0C419
+:10BC7000733596187E1FA939E1FEE908EF668781C2
+:10BC8000E139398B72EE4F62D5AE2AA877DC7EBFE0
+:10BC90007D16EE0B6718887EA498CE26C493D99E95
+:10BCA00063AFC27142E235CD29E9372059BCB5FBFB
+:10BCB000F09E67207D7BCFC92F319D2AB5EFC3F35E
+:10BCC000255246889FD26BBF9811DC9B87335F4A11
+:10BCD00032963B6E10914E75EB6F9A86FE54C150B2
+:10BCE000E71A584F5802F31B601E61BDF689797B35
+:10BCF000A9209CCED54896F5150DD8DFA808BA7FA7
+:10BD0000C0BE03AECBA7F34DF457F680A8473A0E5A
+:10BD100053F68FC3327BED1FD3FCC2304DE1593B4C
+:10BD2000E4C3157A5F637BCA87FB776B13526E108F
+:10BD30001D3DF5695F19D6BBF2BB1BAB685FFD26E5
+:10BD40009315CF9F8529FBCAA1E374A53A5B67438E
+:10BD50006AB418647316F1550F5F72E0D85383E626
+:10BD600001F5FA9CA73A6E731EC783DA9FD1C264AD
+:10BD7000B42343F7AD43FB817970BE56EAA9FD3188
+:10BD8000D646E70174888B517DB5ABA7B90DDFE9C5
+:10BD900024BB1FFF82E382CC1A43FC35AC55DBCEBB
+:10BDA0009CCACF0DA8F4182A2FA5D0FDF7D47A6F1E
+:10BDB00038E1819F2708AD1F0AD7D0F6F0B7335876
+:10BDC000DEDD60E1FB885DA99DB922AC7BA53D4726
+:10BDD000337F5ABFD0D37FEFFD3C6DBE4C36F6B9F2
+:10BDE0003E94077DCD77824EBB6F596CD1B62F8DB7
+:10BDF000D17E772568F39245E9DF916DA2F31A8E23
+:10BE00007C139EF753F9D818E2EFF78ADF2AFA2E4F
+:10BE100091C9741E7593DE790EE5C4E33340D201F7
+:10BE20007D3C2CF8CC582E55B45B510FC6ADD39346
+:10BE30009C7AFCAE5BCEE0BDA016A06B84E571F7EA
+:10BE4000479B6EC57CB148F10D9BFB7039D251CB3D
+:10BE5000775FBF371BCF9F3A0D74CE5B3DB7B1758F
+:10BE6000AC612B1E0B8ACB94CD69F0FDA12AE68430
+:10BE700099B02363632371FC2DD1A215F5DDF3D1B5
+:10BE8000F5FF8E7194E6198CF61942E15737D246C8
+:10BE900072366E75B680F75B1E1E9B5F8972310627
+:10BEA000FC6594AF90CA7DC517C715F0F8C0B6C53C
+:10BEB0002FC523BE37580FDB699E15A213A7D85292
+:10BEC000C1E57F8B85D13E7BF3A852371E4DEC72C6
+:10BED000C90E3C8BD8E2DE41F35E592D72D9AC9C81
+:10BEE000970158C851399CBE0C364AFD986E34B340
+:10BEF000F839289792C2E87C507FF681B484CB57FA
+:10BF00006C6FCCE9BFDE43118DF1C85CCB67E49F59
+:10BF10009F0BFD6D9DB199F2AA3C8D53E8BBBBDF31
+:10BF2000103DBA1BF04B72361AE42C9EC7638E8705
+:10BF300089B775F5C2B4203AD555807CCDE2E72E9D
+:10BF4000307EBBBEA834E387FC4C9D9BCBE51855E7
+:10BF50001EBBEB9761DC05DAFB515F633F78CE0FC8
+:10BF60005219D7B751A83F447EF30C8303EF39E849
+:10BF70002A400E437B5D82564F1C18C9F135FBC128
+:10BF8000BBCC9EA0384D8C721E66A3BEDE9C06EB19
+:10BF9000D93843746E07786CA96810FA8AC7C455FB
+:10BFA000707E990DF5D16FDE5291131BBC9E668C8D
+:10BFB00073C0D036D70F9FDBD385C8BF5D2379BC54
+:10BFC000BD67DD1CBE71403FA8879A4797AEE66A01
+:10BFD000DA41725567E56D6DAE7A3A07D955C1CF32
+:10BFE0005DAD13F87E82A4C4CB9B8BF249BFF44BAA
+:10BFF0002F152B499F84E2579D3FFDE507E91199D5
+:10C00000F1F119879BB4CE4CFAE107DA3B74F94A97
+:10C010007DD40B1E6D7FBA625136E3F8A85F10AF76
+:10C020003AE6C57B93A1FD952AFC163A1FC969E043
+:10C03000EDB19D8DF88BF4DB6901E0C8E982CEA1FA
+:10C04000B3F7383CB7243A7C6BF8012ED28774AE34
+:10C050002BA5F7788F098E65B8EFE87D5DA2F3E731
+:10C06000A17A4FCDAB7030B136E79C3EEC4D9C0FC2
+:10C07000EA3569A7D789FA01D0978AED362A4B09A4
+:10C08000BBB3D45CE0E8ADD7BA5C6DABAF82729362
+:10C090008399F6033C4C53997F30C079ED33CF1C24
+:10C0A000BF8AF53D0EAE03F899E0BCE6F94733E6EA
+:10C0B000407BF3EDAD26B4B943CFA1F56EEFA47686
+:10C0C000714BAB4CD319C5236554B986080BD9AF56
+:10C0D000CC7486E4B334C9C6EDA7103DB90EF85050
+:10C0E0008FF04A6404AFD03871E8F84905C9FCDE26
+:10C0F000E4E2521A774345A71EE3905DAE7AC54E3F
+:10C10000F2F4A9EF42FBB17B3AA723FF77151AC8D7
+:10C110001E7EF8C1499311CFDE6512C5D17AD17B5D
+:10C12000C8BA3D23F59CAE1C8BCD287FB7CCB9DBBC
+:10C13000ECE8C3FED852318BCE2F5A96703B63A5E4
+:10C14000BD81E488A542B9E7A2D8CB71AABF13A2EA
+:10C1500027B7543798F1DE9B7ADE9085D8DB97EDD0
+:10C16000BF1FBDBB61F98BF1A84FEE2A6988C77963
+:10C170006F89F04F7713DFD5939F02F2381EE5F1F8
+:10C18000A2910E922FDDF27FC6393B0E1E18695523
+:10C19000F88ADB435FE27F41BF668D92A714601C83
+:10C1A0002DB5448E7660BC74DFBBD300AE93BD7AF0
+:10C1B000F2638DFB81F4C12F322638495F9E1E68E1
+:10C1C000B0229DAC6AFC468FF76BCEE2E955E87F62
+:10C1D0005502B78756C51898DF42F3A1454F752E13
+:10C1E00066A8A7F509DC3701BFC58F79162310FDB6
+:10C1F0004C8EF1BAAD00872931BEBB30AD4AACD709
+:10C20000D9609C1247B480F09DA263C5061EAF9D05
+:10C2100085F35C11F311C55927A7C5D17D54A3C57A
+:10C22000ADC3FBC97A67D5F6B58CCE8B51BC15B0C2
+:10C230004AF7E18C18C7BDB6278EABEE13A9F1DC27
+:10C24000750529042F21C1FF2DE223CB1A10F11E01
+:10C250007E983E40F6F8AA4613F941CD093BDA91A3
+:10C260003D3223F83EA47A3E17E063B1027C560CBF
+:10C27000BC9BD6959414BB17E7A5FA91F120AF505B
+:10C28000DE6525CC9B8AEB4B7AC3ED4A867AC60CD9
+:10C290005D366016E0EAB9A278AC1EC6213C58D8DB
+:10C2A000384CFBABBF22D140F1D8D0F2270B785CE1
+:10C2B000320B0521AEEB5E13DDCF5D75E0BEF7AA54
+:10C2C000507E1E3039C967678114BCFFDE1D77665A
+:10C2D0007CFFDDAE9CBFB5DB0D743FA63BBECCF84A
+:10C2E000BEBC1AE7881AE5D98C78F231C721F4C7A9
+:10C2F000FEAB718F1B46CA4F607FAC6DC015C56326
+:10C30000C2C6EA689F2729857982F7055629EB5F1F
+:10C31000D50D877A3BEAF575289407F60F878D3798
+:10C32000E7BB2622DD46EC8847FDDA47BC431317FE
+:10C33000C17B2879B10462FA93AA799C2466EA3C0D
+:10C340008A774853F93ED90A1660FCDCA0C0847C89
+:10C35000BAEA4BFD0D7087E8D7CC7A929391AE90F4
+:10C36000B8482F7F45E6766588DCDBA2F0F9F1025C
+:10C3700025EE91CFF2BFE79325BB2852D9F7891854
+:10C38000954272E811570AD943C41C41F0BE9C9DE6
+:10C390007350B1877EA79C8FF72BE7830F2BE78322
+:10C3A0005FC5770BC0903F86EF16407ABCC949E560
+:10C3B0006F341528CA99E36F45EE9248B21F94F97D
+:10C3C000E994F9ADB04E7325037E566DD3D37958F9
+:10C3D00063C284E968CF32AFDC9E11DB73EF8775EF
+:10C3E000C2BFFC9E73A75D091E3A4F3AC7CAF73F0A
+:10C3F000557C2D54EAAF12B619905FC7766AE136C4
+:10C40000FE52A4C6AE2C62DAF397134D4334F54BBB
+:10C41000ACDAF39793ECD76ABE4F7668CF5F5E973E
+:10C42000313E641F564B570B13806E804EAA337DEE
+:10C4300034FF85D6528A7BCD0DB9C77447AB363FE2
+:10C44000DFA7CD2FDCADCDABE7C9C34629F43092D1
+:10C450008DFC31F14EE4F70C85EF0701BF6FB33A65
+:10C460009911DACF1678BFF81EC6001BED4BC976BE
+:10C470008C23ACE3F79FB05CC7CBBDC395F67ABE07
+:10C480006FC58EDBE8BE1D4BCCE1ED06F0EF7EFC08
+:10C490008EA4F1720EAF87FE12D61BA2F453C3E531
+:10C4A000939C45FE829BEC33236BB3626A01FEC210
+:10C4B000349A39E99E750CAB27BF7590727F325163
+:10C4C000E8A4BC43B086613E4570A6F0F8858FE4D1
+:10C4D000C35049FE752AF1895B7447F4E6970DB99C
+:10C4E000BA07F0AAF8860291E4E2235646EFF9D89B
+:10C4F0005CF713BF6EC316B06E336B8F49157AF8B5
+:10C50000E7EDBC61C45F135C0EDA2FB515240B7820
+:10C510002EA588859CCB364569E8A3C41A17425FCF
+:10C520004342E84B4B7F7F9DECD5453990CE42E8A6
+:10C53000F02FBEE5512C18AF4C8FFA058FD58976B8
+:10C540004A059ECA02964F75469B31EE678BD173A2
+:10C5500079A5D83FA54A9FABE459EBB2E1FB6B56F6
+:10C56000D149E6F6BA2D3DF12518DF9600F635EAF9
+:10C570006399915C7DB0D31F7635D47F04FCFF6551
+:10C580000CFD1BEB64BCEF65B5E4105F3F624979BD
+:10C5900000F35ED0E8587F4331F7AFE5E86C82EFF7
+:10C5A00051A1BE05EFA53DC2F24CA9C1F52DBCFEBF
+:10C5B0007A596451909F183182EABF9D6766F8CE20
+:10C5C0008177A0D98771EC63F2AC77DD41EB7F7B9B
+:10C5D00014D707AF191CF1A80F1E997C77A687D234
+:10C5E000748D5F684B10E4BECE17858F3672BD9296
+:10C5F0005BE2C7787C74C234579903FD1DB70BE921
+:10C6000042E712F1E85B37FD442B7EA8E406C10F38
+:10C610004B9B745D0E43FFE3110B77351E299ED5AE
+:10C620005286F90291EE03D95CE2EBD9B8AE027EF4
+:10C63000FEF04AE571A81E18329ADBBF9386443C8F
+:10C640003014FADF50245AB1FF0D7A2BDDE7F14E9A
+:10C6500066E45717BBEA97E0BC6D09110CCF6FDA9F
+:10C660000A1A78BED8C0CC004F936BBD17F1694A47
+:10C67000F58CC0F647077E7A1CED195B82483A704C
+:10C68000A2CBF9AE1BEB1728F19DE279EB703C9B36
+:10C6900045B49A590F1C54B9BE9EC9CBC9FFB20A02
+:10C6A000F4DECC0A6B430DCEE7918470B2F36DAE2D
+:10C6B000060BE279C3403DD14149227F576A55C2FA
+:10C6C000B40ACCFF62A09171BEF32F1F8AFE815382
+:10C6D000A075355B1A685EC72E8939C1EF96A8A987
+:10C6E000D9A185CFEF46F1F89009E3F1809FB7F526
+:10C6F000CC9C9A8BF4A3A778537F7C6B735DCE7E22
+:10C70000FB61FE2A94030B11BE8597C2984F40FA35
+:10C710003D2961FE777F015B80D6D960C1FE416E05
+:10C72000BBFAA2BF88D19C7E9B0B0E4BF84E82D7E2
+:10C7300021101F345B4E4E443E7828B58CE8E8A1AA
+:10C74000828F9A892F86F3FCDB79F7EE413C7A13CE
+:10C75000C3697FE7A1825931C1F4BE609448F432C5
+:10C76000EE6F614E3FE2639481F8FB9108C7568CEF
+:10C770004F79F3CC64BF4B8275D96C98E7C46228BB
+:10C7800087FEA25D623EF17E75058F0B2B307ED554
+:10C79000653B84F8904A66317EAE4939F71491EFD3
+:10C7A0005C4335B4FA6F952597DECFD892D07042AE
+:10C7B000D9B620BB6A9022570694884528DF0659CF
+:10C7C000B85D65EB940594BBA1FB47AABED729EDE4
+:10C7D0008C325BA6A3541B37D215707D1B6A7FE990
+:10C7E0002CDC5EC33FBC8FAECF353F89E738743158
+:10C7F000DA7A7F19A59C730AB1AF543ADF60E57A03
+:10C800006243AED18774BDA198DB592A1FABF247B2
+:10C8100085BF2A87D47B7EEF28F695514E5E3687FA
+:10C82000E4EA99E5786F07D49E7317C37B8956FABB
+:10C83000FEAE721FF194626FBDA7D85BFFA1D85BFB
+:10C84000EFA3BD05F986518308BF37142E76DD08A6
+:10C85000F31A902011DF143A4E4CC4EDAF71192732
+:10C860002C7DD96111D1A20EE3058F34F27B4936BC
+:10C8700097ED9815F159CF95F92C6B766934BBBCBF
+:10C880007CF2E37AD2D13EE4EB7B55B94F794C99F7
+:10C89000FF7165FE6F28F357ED8F4943BE32A1BC8F
+:10C8A000DF10AFEF477E29FC29A7D0B9A85079B592
+:10C8B00001C408E9EB2291FC9F2078E76AE4BD25DA
+:10C8C00020F7F54E59C9681EBFDB6076572C467CB1
+:10C8D0004E6614A79DE8AA27B96503B94572B3F857
+:10C8E0005CEB6CCA473883E59E518163B1CB5A8EAD
+:10C8F00072BE38464F1F5724A4D0BD5BD5FE0E1D17
+:10C90000F772F00C9567A682F55EE2F3FF47726C52
+:10C910002CE3E38EBD243AFD5CDE1C4F2679239187
+:10C920007C0AED5F95376F63CC6420BE4F64A1FB3A
+:10C9300000770A614E84E79D287C303F97D17DFFC8
+:10C94000C18A3D6757DED1014EA1B8CED84EB0F5B1
+:10C9500083F87AFC2553F71B6CDC8E8FD6E4279A7C
+:10C96000E235F54BACC99AEF93ECC335DF273BB208
+:10C9700035F9EB324669EAFFC259A4C9DF50305994
+:10C9800053BF4C2ED3E46566A577480E36ED1EFAEC
+:10C99000B11EFDA7B6A11FA7F5864FA1F1F00B0EA2
+:10C9A00060E1B5A38B67E80046855187EF4C86FCB4
+:10C9B000C6D19367E880EF0A071FFE3A195868D37B
+:10C9C000E8293C7FF5E1AF5320BF65F4753C3F8615
+:10C9D00091F0DC3A7AEA0C2FE0591CEA797434D0F1
+:10C9E000F12D97EA8FA23DF8C765D3E6264BF84EA6
+:10C9F00040596206CCE76C8AE761FC7E73ECAC15AB
+:10CA0000781176FC77F5748FED37A379BB8E8BFCAC
+:10CA10005D8D8E8BFC1D0DBBC8F1F65353F5BECB5F
+:10CA2000040E9A7EDF5F11647EAF05FDCD3969DCAF
+:10CA3000DFC414FD4D4CD1DFC414FDCD397AEE6F47
+:10CA4000628AFE2696A3BF89E95B4D32A5EF34B911
+:10CA5000286D6F7253DA7DBFE029E76A3D0A38EF2F
+:10CA60004F8B5B98C3E417114EA1E74A3AF49D4FF0
+:10CA7000D07ECA45E6C0FB1287224E3970BFAC3962
+:10CA8000CF44742E74B63B4CF0BD3097E79B2FB665
+:10CA90003B507E611EED9E8EE8B66C94BFCDB51600
+:10CAA00027EEBB355FF4C7239F14D61BE8DE4C711D
+:10CAB0006727C5E90A2DFCBD844311C78E28E39181
+:10CAC0005CDA7991F9457C27C7DCEEB02AE3603F58
+:10CAD000306E32EAB7C225302EF55BBF98FAA9B0A6
+:10CAE000748F2B848C6BFAE171270A41E3A67631AF
+:10CAF0007A1701C77568C6F54B743FFCA25FC27810
+:10CB00006147B4D38E714D355F8CDF21BF45CFDFD8
+:10CB10005F2C74F825D493B8BD89EF5BC681D833F8
+:10CB2000D3790D1FC965A84771B99D5D7C9D179A82
+:10CB3000FC0B909F8A957760C08CA57B9B4C0C73F7
+:10CB4000A2BE2891BE3B363817DF39E3EFA0151B94
+:10CB5000DDDB901FEB745CDEB01833DF57D0B5CF50
+:10CB6000FF15D43B193B98EC9504FB4B2C7504B492
+:10CB70005FE4CA44BBE3245B4F72687594E77F8F20
+:10CB8000067ABE31B35E50F427F5637785EFC0FDBA
+:10CB9000888E5786E5211F4D333A5E64C0BF7F1FE4
+:10CBA000DD44FC3C2DCA91872FACFD7DF40A9E8F9D
+:10CBB00073BC883783ADAC694671FC8F3F2F45F15C
+:10CBC0000D749AA70A3AB47FD4735376D1133606FC
+:10CBD000E054EBFACAC0E7D769C07870D41807C12F
+:10CBE0006FE06146E7983A2747F876E07EDF80FA03
+:10CBF0006C8C87B24C471ED64BD277D27DF28EEF2B
+:10CC0000F8FD27A819795350FCFE898392ABAFF841
+:10CC1000E3C931DC4E5D946A598778A8B39B4C9484
+:10CC20001EBC48E78299CE9D8AF16BD9D0F77BA9CB
+:10CC3000AF8EE1FA2179A54131024174C294E53009
+:10CC4000A6E6BD0CF4D0F6BBC3BADF8B037032434B
+:10CC50009AC8F3DE1D8F17EB34F565ACDFFD1DE3DD
+:10CC6000F4ACA7BDFCDBCD8F2F4F55C6437A99C7D7
+:10CC7000C87F0CD53B6B0B6DEA3B3F84E7C763CCA9
+:10CC8000DBE93D5249798714EA5A314E11CEE83D2D
+:10CC9000AEC1BF37FB9A819E769A393DA78A3CDDAB
+:10CCA00029F2FAEA3BA5EABB6BCF147A6E2BCCA330
+:10CCB0007EFCD48FB4371BDFCB88676D34BEFA6E31
+:10CCC000945A2F01F420092B5D673AE2AB5012FB16
+:10CCD00084E7E7638AE6201D5C68F2B24F82F4CDF8
+:10CCE00085F0C8C660FCD549DAF75A3F1F3381DAB0
+:10CCF000A9ED6B1B27B24F2878E9273AAA4D156991
+:10CD00001FBD4E62AFE23B9C20590DA897D576A778
+:10CD100040DEE278EF82FCC5F43D90BB9FE8D13E57
+:10CD20009D4EE9FB4D1E2A3FDD544D69A0A99ECAC8
+:10CD30003F6A6AA4F496DB2372917F16ED5FC63ECC
+:10CD400009A2F7DA36BD2710943F55D4371DAD51EF
+:10CD5000E8E85472DFDF9F1CC3EDBB53E3383E3B72
+:10CD6000C0DEC0F7DA802E975B6DFDDB1D1DCAFDAE
+:10CD7000AEA3E3F9FE65473CCF2F1FC3FD6E596498
+:10CD8000ADD8FEE87803EF3F45ACC6EFB28DF77B38
+:10CD90002A5DA477A47E35B1E8FE31583F16CA73E8
+:10CDA0007AF2A7AEE2DFE541BC5C9DAFFAFDB64288
+:10CDB000ABFAEE613A7FCF8FDFF7027AA7FED5FAA2
+:10CDC0006326703E0CADEF4BE5E7C943E1F1A9C224
+:10CDD000B7C4176867231F2407F1459D83F842A550
+:10CDE0004395FED6167238A71A153A0FE7E7EE07F5
+:10CDF000A32E847683E3CCB48F20E3BBCBB09E9D7F
+:10CE000082C22FA1FCA0BC63ACF283CA072ABD0F6B
+:10CE1000063EE3EF34F3758C95FA795F5859477BFA
+:10CE20006CC45D84D7837A2BEAADB1127F2F79B0C1
+:10CE3000D8F5CEEDC89FB1110E8C9196ACB2D4F757
+:10CE400025C73EFEAFC243950BFDC0A3171C0CCAFD
+:10CE5000BBC33F120E24E7508E23FDF621B74E8C44
+:10CE6000B1297617A7DFCFC7C86F221D7508661DC9
+:10CE7000DE7BE830F77D5FF0E878BE0E958ED61643
+:10CE8000324A07E33A87F6967BEA7ABAD7790723DC
+:10CE9000F9971AC6CB43F1ACAE2B48FE9DC179A9D8
+:10CEA000F0640CEC1FE827A1C642EFE8DD56E8E08D
+:10CEB000FC36F0D3CA0DAC67FD358A3E7B4C94F846
+:10CEC0007BC88A7EE92E17A49965991ABD4347CF7E
+:10CED0003A5FE1EF8AFB45568DEF72A36F1D1C1779
+:10CEE0001F52C8E543D7F43C11F7132FFCD542F786
+:10CEF0008B2F0CEA3C8DF6CE85563D53DE239B2AC4
+:10CF000080DE9D8B3E130CF9A5F29EF3E7E8F70E49
+:10CF1000837A6D174FA3BDB568ABC44C789E60EBA8
+:10CF200037B7203DCD7B454FE7999A5B371E477A4F
+:10CF30003CB74FC0E76FD9857D02C5316B5B227C62
+:10CF400066A85F0A79AC7FC76EC9C7E38B32C53963
+:10CF50006A94F13E31D7A5A05D3E71EB5D3A84FB4A
+:10CF6000BCED028B837E8FB4DE790CDF1D39B78D6B
+:10CF7000DF2F6B3647EEC0F9974AEB0C83A07CC1DC
+:10CF8000765E5E6329FD0CF743173CCD28FEB36047
+:10CF90006F04F98FF35AF41F0582EC8EEA6DDAFC08
+:10CFA0007CD666403A58B0535B5EB307F241F279E3
+:10CFB00050A1122F19CEB2295ED2C2E307AA7CEF8C
+:10CFC0006D5F7BB91C6D50DEFF667F89A5F70F5F33
+:10CFD000F926E9230BCF9729F93390FFEA1B8E1727
+:10CFE000152E75CAD85FC5B3DC365867DD2B662BA6
+:10CFF000FAED7507CE46E279B04561017A1799BD21
+:10D000002C59D1DE7B60BFE445F8D61E343F89FB46
+:10D0100098752F9E30603CA174DF62B2572631EFC5
+:10D020004AF49BFDA2C8DA898EDAE97D5F2677CEC5
+:10D03000C37E2E1C305BD10EA87BF94FC76EC7FC98
+:10D040008B02DDA7BC9018203A99B755A27B430C00
+:10D050002DB4FC1E3A9110AF88E7B6287A8FE50E02
+:10D06000C43BE219F0EE48463AE171D0794F4BF4F7
+:10D07000BDB9B5D980F5CFF9387E55BC974A4B0973
+:10D08000CF0B1EE7F89CB875D7E630A483A7F564EC
+:10D090008F1F817683783B0D1D185EE1FD5FD8C53B
+:10D0A000CF9177D3C10163371DE03C2F4707C0A75D
+:10D0B000A4F72F47079DE89792BFFFDDB9C7D00EB1
+:10D0C0008FE0E787D5771BD5771A072E3C7514DFDD
+:10D0D000E74AB3BF407677A5ED8BDAC58CDE099DB4
+:10D0E0005388E74B26BFBD02D17772CAB3D9142F3C
+:10D0F000D507766DC178437438C5C73A92CBB6E18F
+:10D10000FB98C5B66F93F6C23A16FDCE48E711EB11
+:10D11000157EC63F3C07A2BE4B0C78A7F319B50796
+:10D120008DFC5CC63EEDFBE11DF19CCE4B0C9D954C
+:10D130008BD14F80FE701C41E6FEE9C283FC1D4589
+:10D14000D59F5CA8BEA7B847FB6E83607D9BEA3D78
+:10D1500050984270181A37D68176797339F3840D56
+:10D16000FD217DC1DFA97C5CF18BFAB527FBD11BCA
+:10D17000AA1DC9BC21F7DA15B97547019FE3D1BBD8
+:10D18000DFD0E17B8C1D3BF9EF3BCC3F08F22A0658
+:10D19000F719F51AB953A7D4FF14E90FE076DE5B4F
+:10D1A000FF922805CB97F78BB19F9AA7793F7548D7
+:10D1B000571457F56F0E83FEBE6CD333E497054CBE
+:10D1C0009137FB23286ED44BBEECDCBE12CDF7505A
+:10D1D000BA5A0876262E2294BEEAF669EB3D5DA87F
+:10D1E000EC7B0E67D7E0F9FFAF31E090D7235FBA51
+:10D1F000DFE9678E28E4EF6E7D2868EFEF0F6B059F
+:10D20000960FEA77B8CFC463A44AFEEADD564DFE16
+:10D210009A36BBA6FEB5FB1D9AEFD9FE0CCDF711D1
+:10D22000C79D9A7C5E7B81A6FEC8F7644D7E54C084
+:10D23000A5A93FE6BC5B93EFCA84F5F461CFA8E9EA
+:10D2400024BBA0A93FD961D6F47F5D46B426DF6533
+:10D2500051E0A3D899AAFDFBA7426EFF86A62A7CBF
+:10D260007FE1D48EA3FAED371468C72B93B5E35D45
+:10D27000295EF01D419D9EFF7E02A6F8FB09BA348F
+:10D28000FEFB0998C7DF4FC0147F3F01CB7FDDE471
+:10D29000A4FCBEA602CABF047E09E6F7839F82E90A
+:10D2A000CBE09F60F9E5E0774C19F7B832EE1BCA86
+:10D2B000B83F154E6F29FDBDA3F487EF0DEAF43D8D
+:10D2C000DF6B5D79E225E0E322DB67745F596E086E
+:10D2D00094621CA3F37589E1F967E6F11D6F8A4139
+:10D2E000FD3680A19DC4DC9D6FE23E6EDD8B43ADBB
+:10D2F00078AEEF81FD7F7807BF5FD82751BCE6F09D
+:10D30000FEB391D8CF9797C2E9300AE945C8D77CD8
+:10D310002B507E0D7CC7736793F74ACABB676DA419
+:10D32000EFBE4C55F33EBA2FEDDEB3D780785AB836
+:10D330007B2F7D7F1DF85AF37DF776CD772BD6872F
+:10D3400074A1CE477185CFF7ABFDF9A97E4D2A7F39
+:10D350003FFEF3DD47568E417DBCB76A00C6B51768
+:10D36000EE39113BFB07F0F1D54BCF66A21EA83D6D
+:10D370002029E7D1787FB507F44A9ECFBF26756F85
+:10D38000299E37637B04BAB3F4255B4FE7C416EEDE
+:10D39000DF5583727661C6ED7A8A7FB5494ABC83D0
+:10D3A000BFD3506365DCAE6BFB3A12DFA9FF7DDBB8
+:10D3B000D1EBF11E74C7C123F45E4CC73E49E34F65
+:10D3C0008D1DCBF13B762CF7FFBEDC772412CF0905
+:10D3D0003ED07684C35DE7A7F51F56F21D9012BCC0
+:10D3E000F74BB4FEF99724CDEF01B8C071A1FBCD86
+:10D3F000FBD322705D27DBF878D3407D50796AD566
+:10D400001C9CFF1BF6F23CE57D32FADDA18EABAE33
+:10D41000DB857276619BD4E779F739D82FCCEF980A
+:10D420009ED3E9EBA92F1C1B04707FC335209B748E
+:10D430008452AF622CD79BA5064F2AEA91931647D8
+:10D4400004D2F9FDAEA11188DFC39862B9EB49BAE5
+:10D4500007BE601F1FEFA4B53D12E9EEE4BE1152F6
+:10D46000F0FECB2DCA7ABAE9BB1B6F5EC253B56F13
+:10D47000BB05FBE9C11F2F9F36D64AF5DFF09DB8EB
+:10D4800005EDAC9319FCDDC0630646FEF5C23DDC3C
+:10D490004E3E7970F0F6E0FB59D3147C7464F07D55
+:10D4A000F50BFBF54ABDDB77314D3D3DC7D74EED62
+:10D4B0007CACBE330FA17D5EF3B844671D6AF4F502
+:10D4C000B1B8FE4FB769E757ADC0B946EF8F8D0DC4
+:10D4D000A2D79A03DD7C63213A3FA0F28983F0A9A9
+:10D4E000E2F16486C4E765E7EFF8D5ECDD4574DD6D
+:10D4F0003BBEC4E3B783EF313929BE74197F5AB5F7
+:10D500001B82FC2DFABD23BD6B689E98D2631F9CC5
+:10D510002E941F1A9B877E989BFCCC930CEC5B1877
+:10D52000B316EDEB28FA1D89CD386ED73E3DBDFF11
+:10D530005F6B3AB000DF23EF7202A3C0BCBBB6E959
+:10D54000BBDF67463B779E62E77EEAF0E44BA07F55
+:10D550006B9789B4BE9A3D920FCF175C50E4DE57AB
+:10D560007B936F407AAD392E59D13F9AD896FC7093
+:10D57000612EE977B257EBDAB89D5CB75B20BB58F8
+:10D58000B5436A153BE49C62079F5BD6C9EDE35740
+:10D5900004B611EAAD0D037B04E65D9B3985ECDA38
+:10D5A0005A69DDCAC10E3C47A5B51BE61F3C44E7DE
+:10D5B000AEC0CED1942FDCADCDD7B669F3AABFF8FB
+:10D5C000D2D86E3B6338FA372552611CF2C39B0AEE
+:10D5D0005E557FE7CE6B9CF4FB270FE81C53D4B855
+:10D5E00004C26BD12B2FCCC779FB6AC29CE47F3479
+:10D5F000FE96E0DAF117EED774E0DE1BF233E3F0CB
+:10D60000EDD8CFE97C915EF0E1EFBA2C425D81FD6F
+:10D610009904DF328C3B7BBB22493E29E7081ACABA
+:10D62000B9FF2A630C18A6B27E2CF7E743F5EA3857
+:10D630005D408A0E921381B12954AFD8C0CF57DE16
+:10D6400019E124FD36C4C4EDF521266EAF0FD17566
+:10D650002EA3DF851824F07D8EAC9769FF606D9D49
+:10D6600085F617047B950EE1B17650950EE97D881D
+:10D67000B52D03FD3A355F8CDF337BEC83528B474E
+:10D6800087E3EC8C17947D04AE4FCB74567D749079
+:10D690007E656C99667EEA3DCC9F7D7E56989FA5FF
+:10D6A000677E80EF286CFF75AE93EC86A432F5F7A9
+:10D6B0001AEA492EA8F0FC12E8BD187045776C8173
+:10D6C0006E6AB61D22FFB296B5AFC476A5917C1DD9
+:10D6D000A506FEBE5169184F75E3B8FC2A51D2A5C4
+:10D6E000E3B4F6C39171B27E1CA43BC6B94DE3F21C
+:10D6F000683F9579617D0D6FF377D643E53E9413CE
+:10D700003D7D0D7C88F26F46BD604DD5D8699CBFCC
+:10D7100016F1A26E3E5AF8F693C427EA39CC6AC6CF
+:10D72000F97B66A3D99A1AC4178B90DFD0DE77C332
+:10D73000BF7C8C13F0BF6AEB7C3A97E9698CB5A289
+:10D740005FB748FA92F6257E2CDF2DDAAFCDFBCD00
+:10D750009CFEFD1102F94919E3BAE30DC48F490A91
+:10D760007F6CF708740E60FB773A1ECFAB10287EF3
+:10D7700077331436DA944962BDEA22BA4F7233E342
+:10D780004763594B8CF2BB3D31B46F7993B2EE9B3A
+:10D7900075FE4328578EEADB92319E74B4D6E4C4FA
+:10D7A000FECB591BBD6F5AC1DA293D155EF7A29F0A
+:10D7B0003AF72622DDFDC963A478D6F6E53B225070
+:10D7C000BE67B1E556DC4F0450ECC6B701FBB3733E
+:10D7D00042F71DD5FBC4602FC7217D02FE27211D06
+:10D7E0009C07DCD8737AB75FF8C71723117F5F2CCB
+:10D7F00079E1965B19FA5F9DE4472DA85F46F75DD6
+:10D80000819CDA33F27BF0AAE25DC55B375E1DF0E6
+:10D810002F18AFB0A6048493F46519C9A57F91E8C9
+:10D820009CD6E5F0AAC27DBC829F3B0E70F9158A9A
+:10D830006F150FB7E2BBF54349EF6E233C3123C9A7
+:10D84000CB507AB81CBE8030E93CD9C41823F9A16A
+:10D8500083452E4F07CF13285E793BF3BC1280F42B
+:10D8600096F0F7F5FCDE0AC75B8582B73F31DF2F04
+:10D870003292FF71783B32CEDD346E606FBE0DE5C3
+:10D88000D3FEF8B2C6E1FC37555FFA18F263083FE1
+:10D8900087F06B371E9DF02F088F9EC648E2CB6E37
+:10D8A0007C4B7BAE4C2FE27F308EB55FF0F993AFAF
+:10D8B000805F0546BFBFF8F838ADDE54F1A6C2A5BB
+:10D8C000BFB8E007CC7FD42AD0BE0AE7E3BB8D7493
+:10D8D000FF43DD5751F74F5E19C7F55C68FA01D871
+:10D8E0004BB85FB526E3E440B4334F19D47EF8FE5D
+:10D8F000EF07CBDA13F1F7B63E28E2E92903FFDDA3
+:10D900000F352F87F1B8E407F1462FC2E90361F81C
+:10D9100004D4331F08F75CCFF3710607E6CBE32688
+:10D92000E03D90537A358E79BF127FF0F179948F74
+:10D930002CA67A02FF5D4A07FEDE1DF62B0836177D
+:10D94000CCE783BBD2E87D9DEE7D8D71DC0E7F46FA
+:10D95000594777DCFF5E81E2FE335135E1FEC48436
+:10D960002D2E7C87F3F47D43B369DFB4413B3EEA5F
+:10D97000FD648A976EE0E7FE2E75EAAB82F45BB732
+:10D98000BE2DBEC8CBE7E4D1EF8CA8BF4727DB860E
+:10D9900073FFDCC77FDF50D5675DC75FB004C77317
+:10D9A0003F53E2DFDDF9E10F2605EBC3434FAD4DF9
+:10D9B000C77EAA0DDE2CA7057F87EEB124B45BAA33
+:10D9C0009F5A954EF6F4530FA4A35F54BD636DBAEE
+:10D9D0004CF9700FF9653ABEEE2F9E1B45E7F3D464
+:10D9E000FEF6CADCAFA8301D2A41BD3DE5EAAF56C0
+:10D9F000E0FE41DA7D02C5FF66B0F615A8672B335D
+:10DA0000385FB11613C97FE88FF66B770DFFC54EEF
+:10DA100094076F649CD5CF817A123E203510DFD5F4
+:10DA2000F2ADA3DF095CCD7F27B0A77E22EDFF56C4
+:10DA30002D17E89DAB19F5FC77F3A4F1D104C75974
+:10DA4000ABB38FD1FB574B79F914A36FDF49EC6768
+:10DA50008B81DF3F64EE94E0FB7092B25F38739D80
+:10DA6000F27B71CA38699B63B707AF5352F61D59F1
+:10DA7000EA7724DF6E50F03275E98957EDD0EF5424
+:10DA8000BDC73C1EBEBFB3E95CAA9F611CF4333A1C
+:10DA90005F9866F03C3A1FD7BDC34871D2DCACC179
+:10DAA000521CD4CF5952B411D3994BAB1E9D8F72D7
+:10DAB000B8D594CD8F35F2F935084E11E5F491EDD6
+:10DAC000B7CE42B89DDFC47FFFAB61FB30FADDC249
+:10DAD000FEE4DEAF9AF8EFF93DDD64A2F4D9262B1F
+:10DAE000C3A3EBCF35D929FFAF4D0E4AD9F43CCDB6
+:10DAF000EFD8F4D7DF884BE1F4BB73B9ABCDF43B7F
+:10DB0000880D4639753CC02BEDAADA1D0F28EBC2F3
+:10DB1000F7B8B2BDC913110EB90F2C3E86A6B37566
+:10DB20003CDF977DF3E4EA2414D6772C3DF3C47CE4
+:10DB3000F87EFB78F7350827D3B68B14A7387260C8
+:10DB40005525C2BB7A8791AF4F59F7F94DE9718FCF
+:10DB5000627CF9753DC50D166D3BF3C4030C7F87E0
+:10DB600077B12198DEAF74BD578FE77EE6E5F8AA5E
+:10DB70003F38FC78BE5A9B44FCB303F82AF3A7F362
+:10DB8000D5A2A5CB087ECBC6BB6F42B89DD77B93F1
+:10DB9000909FCE0F1F4B74EE7D4520F8AB72BCDB1F
+:10DBA000AF56E0BF506C5B5798DC23C7BF61B90428
+:10DBB000DF43073E4D47FBF99BFDE53FB8EE97601D
+:10DBC000DDFE6118AF33511AFA3DDFE019EA84F542
+:10DBD000E5F7F33EE8D2F16AFC9F9F53C03F213640
+:10DBE000F89D21E68D82F9D41C14FC6159A8CF263A
+:10DBF0007DA643BF11FCCF8F34E78C19FB28489FCB
+:10DC0000F737DFCBA575D84F5A8FDC1DF99EC8FCBE
+:10DC1000417A7B54208CF983C6EDF673A0CC40FB8F
+:10DC20004EF12417106F782EECC281E13B30FF9942
+:10DC300081E3F1C24B604FF1781093F27BD6F9D9B2
+:10DC4000812FB250CE86AEB7EEE52F883E6AF6AF92
+:10DC5000BA28D0FA277FA6CBBAFCFA0F3DF54516B5
+:10DC6000E2EF337D201FFDB60B864016E2A1EEB732
+:10DC70005C9EFF5838A8E5F3571BE8F73AEB04130E
+:10DC8000D14989F425C51F2E1CE7F187BA034F92AD
+:10DC90003CED3AC8E3408BC4F6D2388C9BD49F3914
+:10DCA00086F2ACCBCEFD31E89FDE712B1CAAE84199
+:10DCB0005D6712DEF73BD84D0FDC8F3C8FFC3B0CD1
+:10DCC000FB69A3F3BD2C2B9CA15DF139F2F3307CF1
+:10DCD000BF307925D2F979DFC01C948F6F66FDAD16
+:10DCE0008EE286BF0FA77BB2B56D92E69C79F73ABC
+:10DCF0007C123F70C454FB299CC9C1E7B90C8E1B30
+:10DD0000C86E7E83EF132EBA8AF3137B99F353ED1B
+:10DD1000F243067B507FBB157E52EDC829BFFF1B27
+:10DD2000F1E5B38532FD04D54FA5C7FF9FFEF74C43
+:10DD3000FF2F4133EC630080000000001F8B0800C0
+:10DD40000000000000FFA55A0D705455963EEFBD2F
+:10DD5000FE4927DD4913421208840642881A6203ED
+:10DD60008172D6C4E9FC6E2033BB016B2DC4088DD3
+:10DD700022249D7482E8EC6AB96E1A02AC6475368E
+:10DD80008C59471D479B9F8028EC769440C0A00D7E
+:10DD90000ACBA26B45AA263A555B54ABAC0EE0A663
+:10DDA00023823BD6E2B8E73BEFB5DD1DE24FEDA69F
+:10DDB0008ABA7DEECFB9E79E7BCE77CE3D8FB45247
+:10DDC00022CA226ACFCD082A0AFFA66EA245446D58
+:10DDD00029247FF641451FAFD364BC7D40A3C958B9
+:10DDE00093EB08CE9E415447DD269A45B4844265A4
+:10DDF000A471BF29F2CB5B79BCFE0D6D4117936115
+:10DE00001BAD6AB013D5A67A0B3614130DABCAAA94
+:10DE10008662CC0B952E9D4BF40DFE7E4A749B873B
+:10DE2000994F222AD3140FF61B9D9C16DCC95D8BDB
+:10DE300097FB1B494D98A7EAF3984F53087C82A3A0
+:10DE4000254B1DD868B46499233EEF8E37D2D60790
+:10DE5000314EA1D23B12F6F94B8F856821D117CBF9
+:10DE600017AA0F65F279AEDA037433518D76ED2976
+:10DE700085F7DD70CC4C5605FC67BCAFF239026704
+:10DE800034EA65FA52470A79ACCCCE4B1E0FCF1B51
+:10DE9000993B29D8C5E76F3FA09089E7B51DB1EE42
+:10DEA0004CE1796DE648B69BF7DD36F03B8B87DBBE
+:10DEB000F6FEF72CAEB958CF4736439E1415FA6DCF
+:10DEC00077F24F17917F60CEFB77313FFF694DF4BA
+:10DED000ED37BD6721D6D7059E8FFD5A0EF6D58248
+:10DEE0006EA5F05627DAFD3CAF48BF9B6FF8DFE523
+:10DEF0005C5786B3387EBEF8395DA2A718BDF869B5
+:10DF00003EF702D68B46EB437659EE21967B716E37
+:10DF1000CE8E2E25719DAE5F8F76694B0ECB159DF3
+:10DF2000A9B81566154D0D6C76421F858AB39717F3
+:10DF3000475F7FB9742DF49B122CBD9DCF17B59010
+:10DF4000DCC7E2C7B69BB40479160F6A1EDC433403
+:10DF5000959A0EC9BD7BA7E23EA8BC61A96712D6FF
+:10DF60008DBE7B2B6F195579BDFDFA7304CA757987
+:10DF7000CEB0A9C97D1B72D7E7E5ED80FED900C4FC
+:10DF80008E4EA9FAFE1E95C7E7C7D7BF689CA74665
+:10DF90002BCE89F0F806C59DE31C679F58BB87F51B
+:10DFA000BE86EFE945BE6FB42F753869CD6CA2FD12
+:10DFB0001DB942FF73874BDA504791F4BFD2E11687
+:10DFC000FA60C72D421FEAF0083DD05127EDD18EEF
+:10DFD00006E93F0351FF8C70A020ECE2147C6D4AEF
+:10DFE0009C1ECE1C434F499E3F9CA924D353149999
+:10DFF000FF70B83C1860FAA532A79C938DCAD1C0B7
+:10E00000FA684E4B2FA10CB4F9414A67BBB17B03B0
+:10E010001EB6FB3FD4EDDA4333C5CF4B30AF3AF3F6
+:10E02000CE46F8DBE52C2B69ACCFC31EEFDF63DEF9
+:10E03000E9D35505DBD13F68735BF9FE8757DC9464
+:10E0400001BD47FF4D238DB7AE285AB0B994E90AF8
+:10E05000BB2276CCFC6E6EC866BBC64FE65335B8A5
+:10E06000BAD4A4E38473B602FDB7AEC13E1B26DB6F
+:10E07000165879FC4AB9F757D827A6F7DA29EB0AD8
+:10E08000BCD08BD9F5BECAF302FF6EA65E9EF780A8
+:10E09000C39D64DF47CB2B82B09BC545B336CF070A
+:10E0A0007F76BAD9BC3FBBF57EC8E751D3944EC149
+:10E0B000319709B810C4FDF33E952E45EC306C71D4
+:10E0C0009932997F38B5222BC0EB4E19F77DDAB81B
+:10E0D000EF33C67DBFC3FDD5DCBECBFD6887B81F5F
+:10E0E000ED8A989E4DA385D05FF0A70D2F7944EF60
+:10E0F000A3F9A0A3665A0E3B5C023FD3F127BF8170
+:10E10000E578A25C97E36E037F866E6BE8D3D785D4
+:10E11000844F8B85BCB0FF4B589F609FB175F1F564
+:10E1200024EDB29B2990C2E7A0C3B620F4445389E2
+:10E13000805FCB0EE7082E6929B38ACF4F647A013E
+:10E14000099ED2AB567D5EAE6B21FC857524FB8C9F
+:10E1500004D58099EDC49F395498C9F28E187E1663
+:10E16000A30FFD4913FCF6CF679ADBD714FD7CFEA5
+:10E1700065438513B05EB1A9B033FF4E7DFCACE1C1
+:10E1800087FE99063FE33C9412CAC77D448F1DCE9B
+:10E19000BF87E92E7B78AD1E07C28582DF142E5C17
+:10E1A000069C5442E7C84DD477FC7DAFE927D047A1
+:10E1B000E879D0FDC77FAFD34ADF3967E2F8A450D2
+:10E1C000BEE204FD8141F73D3FC19D409B5F398721
+:10E1D00071CBA6DF7BAB27336E5883A73B6037FF3D
+:10E1E000A2DB97ED40FF27D05BCB112BC12E2B0F6D
+:10E1F000F47FF60A8FB7F43BDC80FBA86786E8BBA8
+:10E20000F3C8DEC7616F237D66F187AEFDBF7BFE7D
+:10E2100011996725985BBD35544ABCCFD1E37FE3A4
+:10E2200035619FB4D015D06F579C1739EA27EAFEA5
+:10E230003D54F1A93700BDF51FF86BC4B5FA0C0ABF
+:10E24000C06EE965BE4766E47BF5866A2AE171C760
+:10E25000D04AF06F7BC9EA869DFA5ECDA9841F5F24
+:10E26000F3CC14FB6BBEB13B1F71573DBA6FCF238C
+:10E2700059986723C8DB9EC976C47AF5693B16DDD9
+:10E280002FF7B76BCF6F20F73E1BED643ECDCC036D
+:10E29000FB35EF991D0CF0D15EFBFAE395B8871AB8
+:10E2A000EDB93DE8BFB2DBA6420F672D9E8C72F838
+:10E2B000E159B3BB17EB0CBA7978A22E4F5AA4568A
+:10E2C000EE2FAB3B1F71D737F1E1BF80DCF55AF77A
+:10E2D000F3CFE23C7BAD843871611FEB8DD75DE8F5
+:10E2E00035CFC72D8FEC7398602F9794EE95CF8222
+:10E2F0007FAF3EEF92AD5BF419E89D43D88FE711F5
+:10E30000E2F225657B52FF85DEBD255ED6DFC5972F
+:10E31000EA8BBD09F61BF317DF6E6B527C14246089
+:10E320005CF219BFC919203BC7DF6683BC78E89946
+:10E33000916729BEFEE27E73D8C23A6AB6D2E694ED
+:10E34000CCB83FF8F2FEBC0EE7F3A93B0A91C73404
+:10E350002F88AC845F5CB0514A2ECF7BDB885FBED8
+:10E36000831B972A25DF2D4F4D85EEC75773F53850
+:10E370007675C0160C28DF1D8FFEA3839CEFCC8E14
+:10E38000D377AF677E29717E6F5B42AD6EDEB72DAE
+:10E3900053C78F733C7F3FE35895B1CFAA8792E76D
+:10E3A000DF529129F6D3668914220EC6F82FAC8865
+:10E3B000E15AA4107835765D3DD213E0C8CB8AE0EF
+:10E3C00088EFA0F2A1966EA8343BAE4F5F4A20A81A
+:10E3D000958C7F0FB98B8C7B605EEF55E87EE5DB1B
+:10E3E0006FF3D8984F4B6A241D7953AB23928E7CE0
+:10E3F00068E4A8463B8DEBCB8AF19F19DFAF494615
+:10E40000B83F64F6D8C6DB8F8F433C6F1D7EB32ABE
+:10E410003EA9D0FDA669204DF623676411ECB6E94C
+:10E42000B9E47538A733C11F470676657B13E28FC1
+:10E43000CF903BAA7C287E13FDFAA37CD8814FA500
+:10E44000CD0AABF622AFB1650A4D293A1DB0B1E550
+:10E45000FBBEB4A7C27E2E5E6D153F1E5122827395
+:10E46000B927AE0A3E8C982382738ECAFF11FC181E
+:10E4700099105909DCCAADB4AF96F1C991952E1E19
+:10E48000FFB2C2A0A791E40385273257034FEAB534
+:10E49000D1B711376997D9093F89E97B9DA127A297
+:10E4A000C7863B78FC0F41B30BF1614EA562E40BCC
+:10E4B00096F8F9B5B83F8D90EBC041F86793DDDD74
+:10E4C0002BA3C1FDAF201FBC33DBDDE5BA5E6F328D
+:10E4D00087E5CACAFC6A2DEE293BDDFB8F15CCDF30
+:10E4E0005F1CC907CEB1B54B1C6A7BDDBA13FB4775
+:10E4F000CDA37B805F171CDE272B589FAD96A1AD67
+:10E50000A52CD267E6C829A4F84B606F8223BABD58
+:10E510008D14EFB2089F1E562AEB6797710F944B2C
+:10E52000B403F6A1E8F7FCE6C0ABEF006F468666E1
+:10E53000094E8FF5A70B034FA603373EE0F81E9850
+:10E5400013EFFF60F55E0BFA97BFB8C312E1F69EBA
+:10E55000CDC9E7BB7CEDF60CF80B3D9ED00F7BECF4
+:10E5600049A6C7EA0576194EF28380E8FD9CC729C3
+:10E57000F2B7540EB5410FDFD2CB98D612E8136331
+:10E58000E831F3A941CF1FCE7948F8B64E0B0F43BF
+:10E590006F2307CC047CEFE4B826747F5A10EF1A7F
+:10E5A000F500C7AD2C3D6E215EB4A40FADC4BD8C8B
+:10E5B000F45B9D98BFE9C8A7F9383FDB633ECEDB2B
+:10E5C00072E47036C1CE8DF704C7C76C8CB7F41FE8
+:10E5D000C9C6BB24D6DFAA860A211747B812E0476E
+:10E5E000ACDFAF850B217F8B325482F128E496F9A2
+:10E5F0004C6BA049CED1AAE87E4F4734C1F9B1F7A0
+:10E60000F651856EAF8C0F25C807371DBD5412B16A
+:10E61000C7F1A0D9C09513E82FD6FDDFB9C8C0094E
+:10E620005EDA0CBF1F0727BC31DCA3F516C87DAE30
+:10E6300042973BB65EF8CA3B2320E36DAF5D2A9953
+:10E64000598C75C63C4AC0A359717C010EE40A0E70
+:10E650006C3267F3B97CCF2BEE4E5ED2DCB8B1964C
+:10E66000A7D33AD3FDB5D06B1305E45D3756AEB1F1
+:10E6700076F470857EBF3E557F8FFBF628C14E969F
+:10E68000EB22637DEE7CC19B30F0675DF5C65AF8E6
+:10E69000DF7D597E4BE2BBF987F8AFED49A6D7ADD8
+:10E6A000DF589B338E9FFB1EDA7E6A125DCFAFD997
+:10E6B000BBA336DB757D7F4CEE8BB6989C95E64907
+:10E6C00089FA58BEB17612B7EB52FEAFFAD0CF7DC1
+:10E6D000F188358CB8CBFAB5E0FCB7FD71BD2509E2
+:10E6E000B77F805F33056B9D33BE5BFEB16DAB12B0
+:10E6F0001E56804FEC5FBDE267EC3709FB6DAA1830
+:10E7000053A7685A3D1D793779574F4FAC538C6DDD
+:10E710001928A7A8B788BD49CB7EB8D23D8E3E62E6
+:10E72000F36FAED4649F4D861D4FA96F79E6151E19
+:10E730007FB9CC5356C97E55AEA992BF8FDDA7A62F
+:10E7400052CF0F86B21DBF803D4507CD4EF849B967
+:10E75000A6EB334FBDFC2EFC312FDBE1EA647E35A6
+:10E760005569FABC633627EA40D1635FE57BE0FF79
+:10E770005BECCBA5CE62B2D3641E3F953B57F03D18
+:10E78000B6CFC7C63E69A57ABED35E64FEFE3A53D5
+:10E79000B1E3DB3A93E41BC569C1D91287BF90F896
+:10E7A000161D5CE8D45CC0F7A01DFED6FEF57F67A1
+:10E7B000230E8F0CFE67BA0BB875EDD374D8CFB6A5
+:10E7C000818FD3810F27066639D09E1D7239D01FE5
+:10E7D000ADFBB816F3BA8C365E67308B9CB136F65B
+:10E7E0007E8ED51312DED1CDD06BAF73DB2F4B6194
+:10E7F000EFA9DD8263FC8ECE44FC88D7195C39E337
+:10E80000D56512EB0C05B3F53A035AD4190ACC7A44
+:10E810009D0134EA0C685167403FEA0CA051670043
+:10E820008D3A0368D419D0A2CE80FE2BA86BB1BC60
+:10E83000514EDE50DFAAD1EC82FF0FF46A41E4F5BD
+:10E840000F1CD3747A8712C47D7FC6FB230E46AF9C
+:10E85000E875B028C75379E71F34CBFB201ADA5E7E
+:10E860003713F7D6AFB97155171137D914DBCDA3CC
+:10E8700027511F6AEF53DC1B5DE85F2E726C1B5C37
+:10E88000F87E23FA7BCD6ED585FBBA9A8DFA976F09
+:10E89000B057EA58D539C72C72CFFB15CAE1FDEF46
+:10E8A000B0EAEF64BFC6BD2CF7B045953CDA6F1DEA
+:10E8B00092F74BCB8B8A734D421EDA7ECBE78213E5
+:10E8C0009DB6F49D90D71FB239D724C5578FE47DEC
+:10E8D0007EFC74C18D3C43454CAFD5A790DF5E7B79
+:10E8E000013821F948427EB4D6D9FC33E467A45DEF
+:10E8F00033E1FC7E7EE84E64F9D63D6DFE2892B091
+:10E900007F733099F60DF66DCD23C899DC8F4A03DD
+:10E91000E2B23F94DC1FAA74647D92C63FE6D13C0C
+:10E92000E45B75FFB4E6403FEF77B9DB2AF9CA61D3
+:10E930008FF77025FBF149B347EA2F278FD9E4BD44
+:10E94000757EFB9CA4FA4B8D3655EA1F1BCC8AC4FE
+:10E95000F12BE5DE63B0CBAABA7BA5EE5295EB10A6
+:10E960007F8ED9E1D1F28637C077C35C97D4BF6A76
+:10E97000ACF40BE1C77E2FF73C68167FABE95482FD
+:10E980002AD3ABC96D817FAD62758A3D99ED8F2920
+:10E99000EC0FAB78AFC604BBDAB05D91BC420A1095
+:10E9A000ACE795863E570DFEEB570AFBCBBD563DB7
+:10E9B0000FCE5355E19FD7C5718BE7DF475E0BFC48
+:10E9C000661DC755B41C675F8F70BF376D6ABE9EEA
+:10E9D000E7BB72C07FF51933014F6A727E5EE8951E
+:10E9E000785FEDFC84EF5B09DFA57D73D3F7E1A8C9
+:10E9F000893E49C86B4F9A75FC617DCA7BEB14EC6C
+:10EA000055EA3E5E69CF743449BBA28CC4FF0B3417
+:10EA10003D6F2FE0BB72664ADDA20FEB6BDAED6E45
+:10EA2000E83F860BBB8DFCBE40E596E7ED4ED55B1F
+:10EA30000BD329DC3F8D5BCA147E61E77CD4715C0B
+:10EA4000C23F4F3DBBC0057D7C6977431F3539C749
+:10EA5000E6E1DD31CBE0FF7259C355DC97279D021B
+:10EA6000D89F8F43DDACDF5A1C48415D3DE4D15057
+:10EA7000273FA638F1AEBF1E4FB76F71C2CF0A1441
+:10EA800027EAB7B5A9DD35D9CCBF76E60C37F09CBF
+:10EA9000F155EA6123DCEA76706B5053F4B5A66C4D
+:10EAA000D4F30DFF29F7A6544D8AF7D71B7E141D0A
+:10EAB000FC221DF1F547D46D77837F806CEE5E8379
+:10EAC0003FECA0FEA66952BF8DD9D1E5FD393B616F
+:10EAD0004753ABF4758D8DEF99914F0CDDE6CDC1A9
+:10EAE000FE2BD77CBE255BCE397EBD8C713703B83B
+:10EAF0003BB65E16C3F13D46FD1D786B32EABA2681
+:10EB0000A3AE6B32EABA26A3AE6B32EABA26A3AE44
+:10EB10006B32EABA26A3AE6B32EABA26A913AE97D5
+:10EB2000F6DD8E87A41DEA08C87842BCB8B9EAC7EA
+:10EB3000D55D17558D5377A5145786C45DF67BBDFB
+:10EB4000DE3DA6CECAFEAE26F87BD5E0847B1E4312
+:10EB50005ED26371B338546BF1163C60177CF0548D
+:10EB60008D5B6F8DE9CF2EF5D9CB649B8F7BA82C65
+:10EB70009A655251C734EE2356EF84DFE09CF01BB8
+:10EB8000B4F01BD3ECB8DFFCD6C2AE5DAAE7090136
+:10EB9000C9136C72BF5B3732AE307D2F399370E58D
+:10EBA000B331B8C20F9A159063EDA095BA743F23A4
+:10EBB000F84F25377F9C3F0ECE84749C99961ADAC5
+:10EBC000877DA6B5A5BA9117B3BF8B9D9DDCA6889E
+:10EBD000BFAFA106D9771CBC49479E7CEFC4D17357
+:10EBE000BFE1F9F7FE835DF29DAD93D72EFAFFE00A
+:10EBF0004D4D95AE8F5F77847DE75996EA54B643C5
+:10EC00008E57D5162A92BAB89A2AFE50A33DAE580E
+:10EC100080A377D33CDC77B5B5E139C899C3FE2E24
+:10EC2000EFDF2CA3BE6B1A6ADECBF4D9EC3C37BE07
+:10EC3000AB4DCD3D44050B804775C5B0ABB3D4ADEE
+:10EC400060DD6319DEBF83BFDC5ECCA756E3FE96B2
+:10EC50005397B6B34BEE63CE42DCFB32ABAB1FF542
+:10EC6000862D6F9E907AC2B20CD742D41BB6BC7967
+:10EC70005AA7735CFD8A1BE5B213ABAB7F82F866C3
+:10EC8000EB3E9F1067FDA1094974FBC0E4EEF30958
+:10EC900071AE053FF89D4E3F534CB8AF5643945C60
+:10ECA000D5BB1DF2F9EBFE4B7FCFD3A8C4C9A7AAF1
+:10ECB000745C9C7482C2B0E7D1C50EF9FE973371C3
+:10ECC000FD3CD4DBA8D8B510F338AFFD35ECF8E245
+:10ECD000AD9EA7C127CF38770EF1793558C7900D73
+:10ECE000ED19E3BBE429D5DB88B6363D60927E356D
+:10ECF000588AF66D35F420FAD92F76814FED93F3CB
+:10ED00006E2C623ACF1A9AB7DE8E78E9D98DFE73EF
+:10ED1000659E5EEC37B6EEDF699C8FE5D98779C3D7
+:10ED200085AAE4F9C337EA6DCC2EC2553A0E1D37D9
+:10ED3000FCA8AC93E4FBE758FB395EA51A78F9FD13
+:10ED400072B3BC47204F4C7EEA5E5D0A7958DEA361
+:10ED500086BCAF619CEC99528FF96E7B0DC87EC763
+:10ED60000D3B657C6C39AFE3A3B485A6E004E40DEC
+:10ED7000531E0D4E80BC53768CDA5CDCBE1018B589
+:10ED8000217F78E16F476DE87FC14375E3E1BF56AE
+:10ED9000AD09DFC2B251593F9DF71A9277C2E8041C
+:10EDA000E46F854D6F59026CB7739EE67D93F2B7A1
+:10EDB000228963D30D5B9AFEA84AB087E9CF90E41D
+:10EDC000AB549D25E3BE14DDFF7D8F3EA8C28E6E41
+:10EDD00008B2DC09F637E769D3E54812DFB0AC6B5F
+:10EDE000317083F3B5A4713F3347BE3CC5C023E403
+:10EDF0008F8D8C37FEA6B7BE42BEC879DC187E8CDC
+:10EE00004D311C26C45DEFEB1117FC2079DEDABB17
+:10EE10001ED98AF76D53E3768BBC8FD7F46D45DB33
+:10EE2000DAFA9E258724BF4C9ACFF965127D9D9C06
+:10EE300063E4687BF0F3AD39E3ECCB76702DD10E53
+:10EE40004E9A4337E0BD7AD29FEA0E481C09DD0F87
+:10EE50007CD9D96A7723AEECFA55A5D8D7B7F5A9EE
+:10EE6000328FA9FA47D951A7CC0F545211FCE6872B
+:10EE7000DA11E0E1EC243C0C48DD72894370AEDD30
+:10EE80007807B6AD714A3E12F3EB3653E8C3AD983E
+:10EE900097E590EF110CB745A62C7C6F9AE2EE4AED
+:10EEA000C82BCE2E9915049DDD190A83EFE8CF15E6
+:10EEB00037EAC8D5693AAED6A80DAD7B79FC2D35B9
+:10EEC0002CB8F15BE007F36FB7AC977645D94CB13E
+:10EED000DB5C0A29FAFF67702DC47B3DF63DAD6708
+:10EEE0005BB0EF20DEFB4AF099B5A88FFE955DE49C
+:10EEF0008906D58099CFD3338104B77BEE2C94B8A3
+:10EF000013A586C6FB91FF2C4F953A6ACF04D71301
+:10EF1000F86EDAD37CA3E4F587FEA4C7FBD1A5295C
+:10EF20006EE4713DF35C1B71AE9E475D32FE9AA2AA
+:10EF3000F30B3CA1EBA767A97ECE9EE64C799FC55B
+:10EF4000EEA167876732BEBF5932BCE5D5A803186A
+:10EF5000DF1F7B66703FB74F290D77DE073E737565
+:10EF6000795794B9E4DE4EDE79E3137B747D86F144
+:10EF70001DAC7D8923E9FDFEBFFE80CBB3202200BE
+:10EF80000000000000000000040835000000000040
+:00000001FF
diff --git a/firmware/cis/3CCFEM556.cis.ihex b/firmware/cis/3CCFEM556.cis.ihex
new file mode 100644
index 00000000000..e4d92b173e1
--- /dev/null
+++ b/firmware/cis/3CCFEM556.cis.ihex
@@ -0,0 +1,13 @@
+:1000000001030000FF152D050033436F6D004D65A2
+:100010006761686572747A2033434346454D3535D0
+:1000200036004C414E202B2035366B204D6F6465D9
+:100030006D0000FF20040101560521020000060B9F
+:1000400002004D000000006B000000FF001303439E
+:100050004953210206001A060507001067021B0912
+:1000600087011901556430FFFFFF00130343495313
+:10007000210202001A060527001177021B09A701B9
+:090080001901552330FFFFFF00B8
+:00000001FF
+#
+# This card is MFC-compliant, but identifies itself as single function
+#
diff --git a/firmware/cis/3CXEM556.cis.ihex b/firmware/cis/3CXEM556.cis.ihex
new file mode 100644
index 00000000000..895010b230f
--- /dev/null
+++ b/firmware/cis/3CXEM556.cis.ihex
@@ -0,0 +1,13 @@
+:1000000001030000FF152C050033436F6D004D65A3
+:100010006761686572747A20334358454D353536CB
+:10002000004C414E202B2035366B204D6F64656DA2
+:100030000000FF20040101350021020000060B0230
+:10004000004C0000000069000000FF00130343495A
+:1000500053210206001A0501070008631B098701E6
+:100060001901556430FFFFFF001303434953210278
+:1000700002001A0501270009631B09A70119015590
+:060080002330FFFFFF002A
+:00000001FF
+#
+# This card is MFC-compliant, but identifies itself as single function
+#
diff --git a/firmware/cxgb3/t3fw-7.1.0.bin.ihex b/firmware/cxgb3/t3fw-7.1.0.bin.ihex
deleted file mode 100644
index 1042f755f68..00000000000
--- a/firmware/cxgb3/t3fw-7.1.0.bin.ihex
+++ /dev/null
@@ -1,1885 +0,0 @@
-:1000000060007400200380002003700000001000D6
-:1000100000002000E100028400070000E1000288E7
-:1000200000010000E0000000E00000A0010000006E
-:1000300044444440E3000183200200002001E0002A
-:100040002001FF101FFFD0001FFFC000E300043C91
-:1000500002000000200069881FFFC290200069D0C4
-:100060001FFFC29420006A101FFFC29820006A84FC
-:100070001FFFC29C200003C0C00000E43100EA3131
-:1000800000A13100A03103020002ED306E2A05000C
-:10009000ED3100020002160012FFDBC03014FFDA5F
-:1000A000D30FD30FD30F03431F244C107249F0D347
-:1000B0000FD30FD30F12FFD5230A00240A00D30F4A
-:1000C000D30FD30F03431F244C107249F0D30FD327
-:1000D0000FD30F14FFCE03421F14FFCB03421F1296
-:1000E000FFCCC0302D37302D37342D37382D373CED
-:1000F000233D017233ED00020012FFC4C0302F37E0
-:10010000002F37102F37202F3730233D017233ED6A
-:1001100000020012FFBEC0302737002737102737F4
-:1001200020273730233D017233ED03020012FFB95F
-:1001300013FFBA0C0200932012FFB913FFB90C028F
-:1001400000932012FFB8C0319320822012FFB71312
-:10015000FFB7932012FFB715FFB316FFB6C030D715
-:100160002005660160001B00000000000000000088
-:10017000043605000200D30FD30F05330C6E3B1479
-:100180000747140704437631E604360505330C6F40
-:100190003BED00020012FFA615FFA3230A00D720A3
-:1001A000070443043E0505330C0747146F3BF00377
-:1001B000020012FFA1C03014FFA1D30FD30FD30F41
-:1001C0009340B4447249F2D30FD30FD30F14FF9B63
-:1001D000834014FF9B834012FF9B230A0014FF9A65
-:1001E000D30FD30FD30F9340B4447249F2D30FD33C
-:1001F0000FD30F14FF95834012FF95C92F832084DE
-:10020000218522BC22743B0F8650B4559630B433FE
-:100210007433F463FFE60000653FE1655FDE12FFC3
-:100220007C230A0028374028374428374828374C91
-:10023000233D017233ED03020000020012FF7AC079
-:1002400032032E0503020012FF7813FF819320C0B2
-:1002500011014931004831010200C00014FF7E0441
-:10026000D23115FF7D945014FF7D04D33115FF7CEE
-:10027000945014FF7C04D43115FF7C24560014FFE5
-:100280007B04D53115FF7B24560010FF7A03000054
-:10029000000000000000000000000000000000005E
-:1002A000000000000000000000000000000000004E
-:1002B000000000000000000000000000000000003E
-:1002C000000000000000000000000000000000002E
-:1002D000000000000000000000000000000000001E
-:1002E000000000000000000000000000000000000E
-:1002F00000000000000000000000000000000000FE
-:1003000000000000000000000000000000000000ED
-:1003100000000000000000000000000000000000DD
-:1003200000000000000000000000000000000000CD
-:1003300000000000000000000000000000000000BD
-:1003400000000000000000000000000000000000AD
-:10035000000000000000000000000000000000009D
-:10036000000000000000000000000000000000008D
-:10037000000000000000000000000000000000007D
-:10038000000000000000000000000000000000006D
-:10039000000000000000000000000000000000005D
-:1003A000000000000000000000000000000000004D
-:1003B000000000000000000000000000000000003D
-:1003C000000000000000000000000000000000002D
-:1003D000000000000000000000000000000000001D
-:1003E000000000000000000000000000000000000D
-:1003F00000000000000000000000000000000000FD
-:1004000000000000000000000000000000000000EC
-:1004100000000000000000000000000000000000DC
-:1004200063FFFC000000000000000000000000006E
-:100430000000000000000000000000001FFC0000A1
-:100440001FFC0000E30005C81FFC00001FFC0000AB
-:10045000E30005C81FFC00001FFC0000E30005C806
-:100460001FFFC0001FFFC000E30005C81FFFC00042
-:100470001FFFC018E30005C81FFFC0181FFFC018EA
-:10048000E30005E01FFFC0181FFFC28CE30005E07A
-:100490001FFFC28C1FFFC28CE30008541FFFC290D5
-:1004A0001FFFC58CE3000854200000002000016AF3
-:1004B000E3000B502000018020000180E3000CBC11
-:1004C0002000020020000203E3000CBC2000021CFC
-:1004D00020000220E3000CC02000022020000226A1
-:1004E000E3000CC42000023C20000240E3000CCCDE
-:1004F0002000024020000249E3000CD02000024C02
-:1005000020000250E3000CDC2000025020000259C1
-:10051000E3000CE02000025C20000260E3000CEC31
-:100520002000026020000269E3000CF02000026C51
-:1005300020000270E3000CFC200002702000027911
-:10054000E3000D002000028C2000028CE3000D0C63
-:100550002000029020000293E3000D0C200002AC6A
-:10056000200002B0E3000D10200002D0200002F2B3
-:10057000E3000D14200003B0200003B0E3000D38A9
-:10058000200003B0200003B0E3000D38200003B0CA
-:10059000200003B0E3000D38200003B0200003B0BA
-:1005A000E3000D38200003B020006BA8E3000D38F5
-:1005B00020006BA820006BA8E3007530000000004D
-:1005C00000000000000000001FFC00001FFC0000F5
-:1005D0001FFFC5901FFFC67020006BA820006BA8EE
-:1005E000DEFFFE000000080CDEADBEEF1FFFC2A064
-:1005F0001FFCFE001FFFC0941FFFC5C0300000009D
-:10060000003FFFFF8040000010000000080FFFFFC8
-:100610001FFFC26D000FFFFF804FFFFF8000000033
-:1006200000000880B000000560500000600000007D
-:1006300040000011350000004100000010000001E2
-:1006400020000000000010007FFFFFFF40000000BE
-:1006500005000000800000190400000000000800F0
-:1006600010000005806000007000000020000009FC
-:10067000001FF8008000001EA0000000F80000002D
-:1006800007FFFFFF080000001800000001008001C4
-:10069000420000001FFFC21D1FFFC0DC00010080E0
-:1006A000604000001A0000000C0000000000300054
-:1006B000600008008000001C000100008000001A9B
-:1006C00080000018FC0000008000000100004000D5
-:1006D000030000008000040050000003FFFFBFFF84
-:1006E0001FFFC3D400000FFFFFFFF000000016D073
-:1006F0000000FFF7A50000001FFFC4B01FFFC4618A
-:100700000001000800000B20202FFF801FFFC455B0
-:1007100000002C00FFFEFFF800FFFFFF1FFFC57861
-:1007200000002000FFFFDFFF0000FFEF01001100CD
-:100730001FFFC3D21FFFC590FFFFEFFF0000FFFBAD
-:100740001FFFC6301FFFBEA0FFFFF7FF1FFFC064E3
-:100750000000FFFD1FFFC6200001FBD01FFFC5B03A
-:100760001FFFC6601FFFC591E0FFFE001FFFC5A071
-:10077000000080001FFFC53C1FFFC5B41FFFC068FD
-:100780001FFFC4D01FFCFFD800010081E10006005C
-:10079000000027101FFCFE301FFCFE70E10002006D
-:1007A0001FFFC5381FFFC5500003D0901FFFC56451
-:1007B0002B5063802B5079802B5090802B50A6803B
-:1007C0001FFFC4690100110F202FFE0020300080A0
-:1007D000202FFF000000FFFF0001FFF82B50B200A8
-:1007E0002B50B208000100102B50B1802B50B2806A
-:1007F0002B50BA00000100112B50BD282B50BC809B
-:100800002B50BDA020300000DFFFFE005000000292
-:1008100000C0000002000000FFFFF7F41FFFC06CE3
-:10082000000FF80004400000001000000C40000021
-:100830001C400000E00000A01FFFC5401FFD000895
-:100840001FFFC5541FFFC5681FFFC57CE100069050
-:10085000E10006EC000000000000000000000000C5
-:100860000000000001000000000000000000000087
-:100870000000000020100040201000402010004028
-:1008800020140080200C0000200C0000200C000030
-:1008900020100040201400802014008020140080CC
-:1008A000201800C0201C0100201C0100201C010099
-:1008B00020200140201800C0201800C0201800C0CF
-:1008C000201C0100201800C0201800C0201800C003
-:1008D000201C010020200140202001402020014058
-:1008E00020200940202009402020094020200940E4
-:1008F00020240980FFFFFFFFFFFFFFFFFFFFFFFF37
-:1009000000000000000000000000000000000000E7
-:1009100000000000200052FC200051CC200052FCBE
-:10092000200052FC200051082000510820005108EE
-:1009300020004F4820004F4820004F4020004EAC80
-:1009400020004D5420004B342000490800000000D6
-:1009500000000000200052CC200051982000523CA2
-:100960002000523C20004FF020004FF020004FF0BC
-:1009700020004FF020004FF020004F3820004FF0B3
-:1009800020004C7420004AE4200048B4000000001D
-:100990000000000020000BE0200038BC200004C054
-:1009A000200044A820000BD820003FB4200003F012
-:1009B000200044682000489020003CC420003BE018
-:1009C00020003838200036C42000343420002F9412
-:1009D00020003A3C20002BF4200028282000653419
-:1009E000200023B4200020942000204020001D2C53
-:1009F000200018402000157020000DEC20000C2471
-:100A00002000113420001320200041AC20003C784D
-:100A100020000BE8200004C00000000000000000DF
-:100A200000000000000000000000000000000000C6
-:100A300000000000000000000000000000000000B6
-:100A400000000000000000000000000000000000A6
-:100A50000000000000000000000000000000000096
-:100A60000000000000000000000000000000000086
-:100A70000000000000000000000000000000000076
-:100A80000000000000000000000000000000000066
-:100A900000000000000000003264000000000000C0
-:100AA0003264000064006400640064006400640058
-:100AB000640064000000000000000000000000006E
-:100AC0000000000000000000000000000000000026
-:100AD0000000000000000000000000000000000016
-:100AE0000000000000000000000000000000000006
-:100AF00000000000000000000000000000001000E6
-:100B000000000000000000000000000000000000E5
-:100B100000000000000010000000000000000000C5
-:100B200000000000000000000043238000000000DF
-:100B300000000000000000000000000000000000B5
-:100B400000000000000000000000000000000000A5
-:100B5000005C94015D94025E94035F940043000086
-:100B60000000000000000000000000000000000085
-:100B70000000000000000000000000000000000075
-:100B80000000000000000000000000000000000065
-:100B9000005C90015D90025E90035F900053000046
-:100BA0000000000000000000000000000000000045
-:100BB0000000000000000000000000000000000035
-:100BC0000000000000000000000000000000000025
-:100BD000009C94001D90019D94029E94039F940498
-:100BE0000894050994060A94070B9400430000003A
-:100BF00000000000000000000000000000000000F5
-:100C000000000000000000000000000000000000E4
-:100C1000009C90019D90029E90071D90039F900460
-:100C20007890057990067A90077B90005300000039
-:100C300000000000000000000000000000000000B4
-:100C400000000000000000000000000000000000A4
-:100C500000DC94001D9001DD9402DE9403DF940417
-:100C60000494050594060694070794080894090956
-:100C7000940A0A940B0B940043000000000000004B
-:100C80000000000000000000000000000000000064
-:100C900000DC9001DD9002DE900B1D9003DF9004DC
-:100CA000B49005B59006B69007B79008B89009B90A
-:100CB000900ABA900BBB90005300000063FFFC0049
-:100CC0002000696410FFFF0A00000000200069880E
-:100CD00000D23110FFFE0A0000000000200069D0A1
-:100CE00000D33110FFFE0A000000000020006A104F
-:100CF00000D43110FFFE0A000000000020006A84CA
-:100D000000D53110FFFE0A000000000063FFFC0068
-:100D1000E00000A012FFF78220028257C82163FF83
-:100D2000FC12FFF303E83004EE3005C0309320944A
-:100D300021952263FFFC00001FFFD000000400206B
-:100D40001FFFC5901FFFC670200A0011FFFB13FF95
-:100D5000FB03E63101020016FFFA17FFFAD30F7703
-:100D60006B069060B4667763F85415505419E60F1B
-:100D7000140063FFF90000006C1004C020D10F00C4
-:100D80006C1004C0C71AEF06D830BC2BD720857270
-:100D90000D4211837105450B957202330C237601C8
-:100DA0007B3B04233D089371A32D12EEFE19EEFE4A
-:100DB000A2767D632C2E0A00088202280A01038E87
-:100DC000380E0E42C8EE29A67E6D4A050020880026
-:100DD000308C8271D10FC0F0028F387FC0EA63FF80
-:100DE000E400C0F1C050037E0CA2EE0E3D1208825A
-:100DF0000203F538050542CB5729A67E2FDC100FDC
-:100E00004F366DFA0500208800308CBC75C0300864
-:100E1000E208280A01058338030342C93E29A67E59
-:100E20000D480CD30F6D8A0500208800B08C8271AC
-:100E3000D10FC05008F53875C0C163FFBBC0600258
-:100E4000863876C0DA63FFD46C101216EED8C1F87B
-:100E5000C1E72B221E2C221DC0D07BC12F292006CA
-:100E6000D7B0299CFACC57282070288CFF282470F2
-:100E700064915C2AB0000EA80C6481670FA90C6411
-:100E800092B3C1E97EA13969AC2F600036292006F2
-:100E9000D7D0299CFACC57282070288CFF282470A2
-:100EA0006491352AD0000EA80C6481640FA90C64EB
-:100EB000931BC1E97EA10968AC09C020D10F0000D5
-:100EC000002D25028A32C0900A6F5065F5AD2924A5
-:100ED000670908476585A92F200C18EEB50CFE118F
-:100EE000A8EE28E286B44978930260057A19EEB13B
-:100EF00009F90A2992A3689007882009880C65855A
-:100F00006627E28564756065558E7BC104D9B06043
-:100F10000001C0908B941CEEA80B88148CC40B0BA2
-:100F200047A8CC18EEA609BB1008CC029C7018EE9E
-:100F3000A41CEEA508A8010B88020C4C021BEEA114
-:100F40009C710B880298722C90232B902204C8105D
-:100F500006BB100C4C1208BB0228902107CC100CC9
-:100F600088100C88020B88021CEE998B330CBB0195
-:100F70008C340B880298739C999C748B958C399B4C
-:100F80007588968B38987688979C799B7898771C8B
-:100F9000EE9028E2850CFC082DC4CF08480B28E60B
-:100FA0008565550B2B221E2D221D7BD9022B0A0095
-:100FB00064BF062CB00728B000DA2006880A288211
-:100FC0004CC0D10B8000DBA065AFE763FEEB0000F7
-:100FD000292070659E9C6004E42A207065AEC36081
-:100FE00004DB00002EB0032C2067D4E065C1058A25
-:100FF000328C330AFF500C4554BC5564F4E619EEAC
-:1010000075882A09A90109880C64821BC0926000B6
-:10101000DD2ED0032A2067D4E065A0D88A328B3336
-:101020000AFC500B4554BC5564C4B919EE6A882AB1
-:1010300009A9017989D50BEA5064A4DD0CEE11C031
-:10104000F02F16132E16168AE78CE82A16128EE950
-:10105000DFC0AAEA7EAB01B1CF0BA85065834288FE
-:1010600037DBC0AE89991E789B022BCC012B161B57
-:1010700029120E2B0A0029161A7FC3077FC9027E88
-:10108000AB01C0B165B4988B352F0A002A0A007AEB
-:10109000C30564C3C72F0A0165F4842B12162B16EF
-:1010A00019005104C0C100CC1A2CCCFF2C16170C0F
-:1010B000FC132C16182B121A2A121BDC505818FA83
-:1010C000C0D0C0902E5CF42C12172812182F121BBF
-:1010D0002A121A08FF010CAA018834074C0AAB8BAC
-:1010E0002812192BC6162F86082A86092E74102955
-:1010F00024672E70038975B1EA2A7403B0990949EF
-:101100000C659DB52B20672D250265B3F42B221E9F
-:101110002C221D7BC901C0B064BD9E2CB00728B035
-:1011200000DA2006880A28824CC0D10B8000DBA0A0
-:1011300065AFE763FD8389BAB19965909788341CE0
-:10114000EE2698BA8F331EEE1F0F4F542FB42C8DFE
-:101150002A8A320EDD020CAC017DC9660A49516F44
-:1011600092608A3375A65B2CB0130AED510DCD0148
-:101170000D0D410C0C417DC9492EB012B0EE65E356
-:10118000C2C0D08E378CB88A368FB97CA3077AC993
-:10119000027EFB01C0D1CED988350AAD020E8E0881
-:1011A00078EB022DAC0189B7DAC0AF9B79BB01B1F6
-:1011B000CADCB0C0B07DA3077AD9027CEB01C0B114
-:1011C00064B15DC091292467C020D10F00008ADA84
-:1011D000B1AA64A0BC2E20672D250265E30B1FED8C
-:1011E000F98A3218EDFE0FAF0108FF0C65F2860A8E
-:1011F00048516F820260027DC090292467090A4726
-:1012000065A2F27BC901C0B064BCAE2CB00728B0A7
-:1012100000DA2006880A28824CC0D10B8000DBA0AF
-:1012200065AFE763FC9300000CE9506492EB0CEFB0
-:1012300011C080281611AFBF2F16198EF88BF7DA60
-:10124000E08FF92B1610ABFB7FBB01B1EA0CA85065
-:101250006580D68837DCE0AF89991C789B022CEC3E
-:10126000012C161B29120C2C0A0029161A7AE307E6
-:101270007AE9027FBB01C0C165C2A48B352C0A008C
-:101280002A0A007AE30564E1CA2C0A0164CE1160DF
-:10129000028D88341BEDD198DA8F331EEDCA0F4FC3
-:1012A000542FD42C8C2A8A320ECC020BAB010CBBEF
-:1012B0000C65BF0E0A49516E920263FF058A330A1C
-:1012C000AB5064BEFD2CD0130AEE510ECE010E0EB3
-:1012D000410C0C410ECC0C65CEE82FD012B0FF654E
-:1012E000F26EC0B08E378CD88A362FD2097CA30715
-:1012F0007AC9027EFB01C0B165BEC78835DBA0AEEE
-:101300008E78EB01B1AB89D7DAC0AF9D79DB01B143
-:10131000CAC0C07BA3077AB9027DEB01C0C165CE0C
-:10132000A1C090292467C020D10F88378C3698142B
-:101330000CE90C29161408F80C981D78FB072812E4
-:1013400014B088281614891D9F159B16C0F02B1207
-:101350001429161A2B161B8B147AE30B7AE90688CC
-:10136000158E1678EB01C0F165F1B929121A2F120A
-:10137000118A352E121B9A1AAFEE2F1210C0A0AF91
-:101380009F79FB01B1EE9F11881AC0F098107AE3A3
-:101390000A7EA9052A12017A8B01C0F164F08160EE
-:1013A000018289368B3799170BE80C981F09C90CF5
-:1013B00029161578EB07281215B088281615D9C0FC
-:1013C0009A199E188A1F2E12152A161A2E161BDA23
-:1013D000C0C0E08C177F930B7FA90688188F1978FF
-:1013E000FB01C0E165E13D29121A2F12138A352E47
-:1013F000121B9A1BAFEE2F1212C0A0AF9F79FB01F8
-:10140000B1EE9F13881BC0F098127AE30A7EA905FB
-:101410002A12037A8B01C0F165F1092E12162E16DD
-:10142000192A121B005104C0E100EE1AB0EE2E166C
-:10143000170EFF132F16180FCC01ACAA2F121A0E7D
-:10144000BC01ACFC7FCB01B1AA2A161B2C161A6377
-:10145000FC6200007FB30263FE3163FE2B7EB302A9
-:1014600063FC3463FC2E00006450C0DA20DBF058CB
-:1014700015DEC020D10FC09163FD7E00C09163FADC
-:101480004CDA20DB70C0D12E0A80C09A2924682C47
-:1014900070075814CED2A0D10F034C0B18ED51DBBE
-:1014A000C0A82878C3022BCDF8D9B063FA65000034
-:1014B0002A2C74DB40580E5063FAE80000002D25FA
-:1014C000027BC901C0B064B0172CB00728B000DAA5
-:1014D0002006880A28824CC0D10B8000DBA065AFB3
-:1014E000E7C020D10FC09163FC04022A02580250C9
-:1014F0000AA202060000022A0258024D0AA20206AF
-:101500000000DB70DA20C0D12E0A80C09E2924683A
-:101510002C70075814AEC020D10FC09463FBCF00CD
-:10152000C09663FBC9C09663FBC400002A2C74DB21
-:1015300030DC405BFE13DBA0C2A02AB4002F200CDD
-:1015400063FF27008D358CB77DCB0263FDD263FC32
-:10155000718F358ED77FEB0263FDC563FC6400009D
-:101560006C1004C020D10F006C1004C020D10F00FB
-:101570006C10042B221E28221DC0A0C09429240612
-:101580002A25027B8901DBA0C9B913ED08DA2028DE
-:10159000B0002CB00703880A28824CC0D10B800011
-:1015A000DBA065AFE7C020D10F0000006C1004295C
-:1015B00020062A2102689805289CF965811A0A0AE2
-:1015C0004C65A0F016ECFB2B629E1AECF86FB8028B
-:1015D0006000F12AA22668A0078B200ABB0C65B028
-:1015E000E32A629D64A0DD2B200C0CBC11A6CC2D3F
-:1015F000C2866FD9026000D71DECEF0DBD0A2DD257
-:10160000A368D0078E200DEE0C65E0C327C285C00D
-:10161000E06470BB1DECF468434D1CECF38A2B0CAA
-:10162000AA029A7089200899110D99029971882A45
-:1016300098748F329F75282104088811987718ECC8
-:10164000E40CBF11A6FF2DF285A8B82E84CF2DDCA7
-:10165000282DF685C85A2A2C74DB40580DE7D2A0F5
-:10166000D10FC020D10F00002C9CF964C08D2C201C
-:10167000668931B1CC0C0C472C24666FC669709E0C
-:101680006618ECDA89308F2B0989400B991009FF15
-:101690000208FF029F708C2008CC110DCC029C71B7
-:1016A0008A339A7389329972882A98748F349F7515
-:1016B00063FF820000CC57DA20DB30DC405814B8DE
-:1016C000C020D10F00DA20C0B658154763FFE500EF
-:1016D000DA2058154563FFDC00DA20DB30DC40DD22
-:1016E000505815C7D2A0D10F2B21045813DA1DEC86
-:1016F000BD2B200CC0E02E246663FF842F2123C065
-:10170000C87FC30263FF792C20662B2104B1CC0C67
-:101710000C472C24665813CF1DECB32B200CC0E0D3
-:101720002E246663FF5A00006C1004C0B7C0A116D7
-:10173000ECB015ECA2D720D840B822C04005350245
-:101740009671957002A438040442C94B1AEC95199D
-:10175000EC9629A67EC140D30F6D4A050080880013
-:10176000208C220A88A272D10FC05008A53875B00B
-:10177000E363FFD76C100893149412292006655276
-:1017800088C0716898052A9CF965A29816EC892989
-:1017900021028A1409094C6590C78AA00A6A512A55
-:1017A000ACFD65A0BCCC5FDB30DA208C1258147C19
-:1017B000C0519A14C7BF9BA98E142EE20968E0603D
-:1017C0002F629E1DEC7A6FF8026000812DD2266890
-:1017D000D0052F22007DF9752C629DC79064C06DE5
-:1017E0009C118A142B200C2AA0200CBD11A6DD0A06
-:1017F0004F14BFA809880129D286AF88288C09799F
-:101800008B551FEC6C0FBF0A2FF2A368F00528223E
-:10181000007F894329D285D49065907760003D0090
-:10182000002B200C1FEC640CBD11A6DD29D2860F05
-:10183000BF0A6E96102FF2A368F00488207F8905F6
-:1018400029D285659165DA205814E7600013DA2003
-:10185000C0B65814E5600009C09063FFB9DA20589B
-:1018600014E28914899109FE506551E48C128D149B
-:10187000DA20DBD08DD09E100D6D515813549A1480
-:1018800064A208C75F8FA195A9C0510F0F479F128F
-:1018900063FEFB00C091C0F12820062C2066288C36
-:1018A000F9A7CC0C0C472C24666FC6088D148DD17B
-:1018B00070DE01C090DD90648159C9D32A12012BDA
-:1018C00021045813648A14C0B02B24668EA92AA060
-:1018D000200E28141CEC438D1415EC37C1700A77C8
-:1018E0003685562DDC28AC2C9C13DED0A8557CD335
-:1018F000022EDDF8D3E0DA40055B02DC305BFF8AC4
-:10190000D4A028200CB455C0D02B0A882F0A800CF4
-:101910008C11A6CC29C285AF3FAB9929C6851CEC9A
-:101920002CDEF0AC882D84CF28120329120478F322
-:10193000022EFDF8289020D3E007880CC17008081B
-:1019400047289420087736657FAB891413EC2A89E1
-:1019500090C0F47797491BEC28C1CA28210485144C
-:10196000099E4006EE11875304881185520E8802A5
-:101970000C88029BA09FA18F2B9DA598A497A7954B
-:10198000A603FF029FA22C200C1EEC11AECE0CCCA5
-:101990001106CC082BC2852DE4CF2BBC202BC6858D
-:1019A0002A2C748B12580D14D2A0D10F28203DC0C0
-:1019B000E07C877F2E24670E0A4765A07B1AEC0F18
-:1019C00088201EEBFD8F148EE48FF40888110A889E
-:1019D000020F8F14AFEE1FEC0A98910FEE029E904B
-:1019E0001EEC09C0801AEBFA2CD285AABAB8CC2812
-:1019F000A4CF2CD6852C21022F20700ECC02B1FF53
-:101A00002F24702C2502C020D10F87148770070760
-:101A10004763FD6E282123C099798B0263FE9ADD0E
-:101A2000F063FE9500DA20DB308C12DD505814F4A0
-:101A3000D2A0D10FC0E163FF7A8B148C12DD50C0AD
-:101A4000AA2E0A802A2468DA20581360D2A0D10F67
-:101A5000007096552B629E6EB8531DEBD42DD22686
-:101A600068D0048E207DE9452A629DCBAF2B2104EE
-:101A70002C20665812F8C090292466821418EBE2D4
-:101A80008F2108FF019F21C020D10F008B10C9B802
-:101A90008CA00C6C51CCCC8E241FEBD08DE19E140D
-:101AA0000FDD029DE18810658FA9C020D10FDA20DB
-:101AB000C0B658144DC020D10F0000006C1006298C
-:101AC0002102C0D07597102A32047FA70A8B357F78
-:101AD000BF052D25020DD902090C4C65C18216EBFC
-:101AE000B41EEBB228629EC0FA78F3026001882926
-:101AF000E2266890078A2009AA0C65A17A2A629DCD
-:101B0000DFA064A1772B200C0CBC11A6CC29C286C7
-:101B1000C08C79830260015719EBA709B90A299291
-:101B2000A3689007882009880C65814327C2851C1B
-:101B3000EBA964713A8931098B140CBB016FB11D9B
-:101B40002C20669F10B1CC0C0C472C24666EC6026C
-:101B500060014009FF5065F13A8A102AAC188934B7
-:101B6000C0C47F973C18EBAA1BEBA98F359C719BD7
-:101B7000708B209D7408BB029B72C08298751BEB12
-:101B8000A50F08409B730F881198777FF70B2F21C3
-:101B900002284A0008FF022F2502C0B4600004009A
-:101BA0000000C0B07E97048F362F25227D970488D1
-:101BB000372825217C9736C0F1C0900AF9382F3C90
-:101BC0002009094264908619EB7618EB7728967EF7
-:101BD00000F08800A08C00F08800A08C00F0880045
-:101BE000A08C2A629D2DE4A22AAC182A669D893019
-:101BF0007797388F338A3218EB8007BE0B2C21047D
-:101C0000B4BB04CC1198E0C08498E1882B9DE59A80
-:101C1000E69FE71AEB78099F4006FF110FCC020AF6
-:101C2000880298E2C1FC0FCC022CE604C9B82C2033
-:101C30000C1EEB670CCA11AECC06AA0829A2852D92
-:101C4000C4CF09B90B29A685CF5CC020D10FC081B4
-:101C5000C0900F8938C08779880263FF7263FF667E
-:101C600000CC57DA20DB30DC4058134DC020D10FB8
-:101C7000DA205813DD63FFE8C0A063FE82DA20C0DB
-:101C8000B65813D963FFD900DB402A2C74580C5A7C
-:101C9000D2A0D10F8A102B210458126E1EEB44C023
-:101CA000D02D246663FEB1006C1006D62019EB3FE0
-:101CB0001EEB4128610217EB3E08084C65805F8AE5
-:101CC000300A6A5169A3572B729E6EB83F2A92263A
-:101CD00068A0048C607AC9342A729D2C4CFECAAB71
-:101CE0002B600CB64F0CBD11A7DD28D2860EBE0AA4
-:101CF00078FB269C112EE2A32C160068E0052F62CB
-:101D0000007EF91522D285CF2560000D00DA60C073
-:101D1000B65813B5C85A60010F00DA605813B2659F
-:101D20005106DC40DB308D30DA600D6D51581227E2
-:101D3000D3A064A0F384A1C05104044763FF6D00E5
-:101D4000C0B02C60668931B1CC0C0C472C64666F36
-:101D5000C60270960A2B610458123EC0B02B64660E
-:101D60006550B42A3C10C0E7DC20C0D1C0F002DFCF
-:101D7000380F0F4264F09019EB0A18EB0B28967E8F
-:101D80008D106DDA0500A08800C08CC0A089301DC0
-:101D9000EB1A77975388328C108F3302CE0BC02406
-:101DA00092E12261049DE00422118D6B9BE59FE787
-:101DB00098E61FEB100998400688110822020FDDF3
-:101DC00002C18D9DE208220292E4B4C22E600C1F73
-:101DD000EB000CE811A7882C8285AFEE0C220B2BB0
-:101DE000E4CF228685D2A0D10F28600CD2A08C111E
-:101DF00019EAF80C8D11A988A7DD2ED2852B84CF86
-:101E00000ECC0B2CD685D10FC0F00ADF387FE8024C
-:101E100063FF6C63FF6000002A6C74C0B2DC20DDDD
-:101E20004058121CC0B063FF63C020D10F000000F7
-:101E30006C10042C221D2A221EC049D320293006F2
-:101E4000243468C0407AC105DDA060000200C0D023
-:101E50006E9738C08F2E0A802B3014C09629340616
-:101E60000EBB022E31022B34147E8004243502DE98
-:101E7000407AC10EC8ABDBD0DA302C0A00580A76A3
-:101E80002E31020E0F4CC8FEC020D10F6895F828E5
-:101E9000310208084C658FEF1AEAC61CEAC42BA26F
-:101EA0009EC09A7B9B462BC22668B0048D307BD99E
-:101EB0003B29A29DC0E3CB9394901BEAD72D31041C
-:101EC0009B9608DD110EDD029D979D9112EAD4C00C
-:101ED000E524C4A22E34062F310228A29D02FF025F
-:101EE000288C3028A69D2F3502C020D10FDA30C0B3
-:101EF000B658133DC020D10F6C10062920066898F3
-:101F000005289CF965825D29210209094C6592101A
-:101F1000CD51DB30DA20044C025812A1C051D3A0BD
-:101F2000C7AF2A360AC0E019EAA31DEAA91FEAA230
-:101F30008A3A16EA9FB1AC64C13528629E6F880266
-:101F40006001F129DC332992266890078B2009BBB8
-:101F50000C65B1E027629DC08E6471D82B200C0CFB
-:101F6000BC11A6CC29C2867983026001D219EA91FC
-:101F700009B90A2992A397106890082822000988B5
-:101F80000C6581BB27C2856471B5292006299CF99F
-:101F90006491EC2C20668931B1CC0C0C472C246662
-:101FA0006EC6026001A109F85065819B883689F4EC
-:101FB000088C14AC991CEA810C99022C21049970AC
-:101FC00019EA980808479971892A0988100899021E
-:101FD00018EA95089902997228301329301204885A
-:101FE0001006991008990228302C9A740C88100851
-:101FF000C802098802987389379975883898768A53
-:1020000039C0819A771AEA888935987B9978098945
-:10201000140A9902997A8A30893277A73618EA76B3
-:102020008F33987CC084987D882B2E761129761268
-:102030002F761319EA700A9F4006FF1104CA11098E
-:1020400088020FAA02987EC1F90FAA022A7610C050
-:10205000AA600001C0A6ADBF0CBC11A6CC29C285E8
-:102060002EF4CF09A90B29C685655107C020D10FD1
-:102070002B200C0CBC1106CC0828C28609B90A6FAB
-:10208000890260012E2992A36890082A220009AAD9
-:102090000C65A11F2AC28564A11928203D0828408B
-:1020A00064808C843504841464408485F574537F83
-:1020B0008436048414644077745374293013C08CBC
-:1020C00079886CC0902924670908476580ED8820CD
-:1020D00089F484351FEA4B048414A4940F440294B9
-:1020E000A014EA4608881104880298A1843698A3AF
-:1020F000048414A4990F990299A219EA42ADB42854
-:10210000C2852E44CF288C1028C6852821022F2076
-:1021100070098802B2FF2F2470282502C020D10F39
-:1021200000CC57DA20DB30DC4058121DC020D10F24
-:10213000C09163FF8FDA20C0B65812AB63FFE10095
-:10214000DA205812A963FFD88A102B2104581141B4
-:102150001DEA201FEA192B200CC0E02E24668A3AC3
-:1021600063FE480000DA20DB30DC40DD50581324E9
-:10217000D2A0D10F2A2C74DB40580B1FD2A0D10F54
-:10218000292123C08879830263FE202A12002C2093
-:10219000662B21042CCC010C0C472C246658112DE5
-:1021A0001DEA0C1FEA052B200CC0E02E24668A3A9B
-:1021B00063FDF800DA2058128C63FF64DA205BFFBD
-:1021C0001CD2A0D10F0000006C10089515C061C191
-:1021D000B0D9402A203DC0400BAA010A64382A2009
-:1021E0000629160668A8052CACF965C33B1DE9F263
-:1021F0006440052F120564F29C2621021EE9EE06BA
-:10220000064C6562E315E9EA6440D98A3529300352
-:102210009A140A990C6490CC2C200C8B149C110CF1
-:10222000CC11A5CC9C122CC286B4BB7CB30260023C
-:10223000D38F110EFE0A2EE2A368E0098620D30F89
-:102240000E660C6562BE88122882856482B6891487
-:1022500064905EDA80D9308C201EE9E81FE9E91D20
-:10226000E9D68B148DD4D4B07FB718B88A293C1026
-:10227000853608C6110E66029681058514A5D50F10
-:10228000550295800418146D8927889608CB11088B
-:1022900088140EBB02A8D8299C200F88029BA19805
-:1022A000A088929BA3088814A8D80F880298A22A15
-:1022B000AC1019E9D4C0C08F141EE9C586128D1167
-:1022C000286285AEDD08FF0B2CD4CF2821022F66B3
-:1022D000858B352A2070098802ABAA2825022A247A
-:1022E00070C020D10F29529E18E9B16F9802600288
-:1022F0000828822668800829220008990C6591F92F
-:102300002A529DC1CA9A1364A1EF2B200C262006E5
-:102310000CB811A5882D82860EBE0A7DC30260020C
-:10232000022EE2A368E0082F22000EFF0C65F1F3F5
-:10233000288285DE806481FF9810266CF96461FF35
-:102340002C20668831B1CC0C0C472C24666EC6025A
-:102350006001BC08FD5065D1B617E9B419E9981AB7
-:10236000E99F2C21048B2D2830102F211D0C881063
-:102370000BFB090C88020A880209BB0264415289DE
-:1023800010C04D9B90979198928D35D9E064D06C98
-:10239000D730DBD0D8307FD713273C10BCE92632AA
-:1023A000168C3996E69CE78A37B4389AE80B1314F2
-:1023B0006430492A821686799A9696978C778A7D18
-:1023C0009C982B82172C7C209A9A2A9C189B998681
-:1023D0007BB03BB8896DB9218BC996A52692162A88
-:1023E000AC18B8999BA196A08BC786CD9BA22B92C7
-:1023F0001596A49BA386CB2CCC2026A605C0346BB7
-:10240000D4200D3B0C0DD8090E880A7FB705C0906B
-:102410009988BC88C0900B1A126DAA069988998B6E
-:10242000288C18C0D01BE9831CE98216E978B1FF1B
-:102430002A211C23E6130F0F4F26E6122F251D7F9E
-:10244000A906C0F0C08028251D05F6111AE9718F74
-:10245000202BE6152CE6162DE61726E6180AFA02BA
-:102460002AE614292006299CF96490FF29200C8D66
-:1024700015C0801AE9570C9C11AA99A5CCDA202B1B
-:10248000C2852894CF0B4B0B2BC685C0B08C165839
-:102490001114D2A0D10F8A356FA548D8308BD56DD5
-:1024A000A90C8A860A8A14CBA97AB337288C10C063
-:1024B00080282467080B4765B112DA20DB302C1224
-:1024C00006581137D3A0C0C1C0D02DA4039C1563FA
-:1024D000FD26863664610C8910C04D9B90979198BB
-:1024E0009263FEA4C08163FFC78A15CCA7DA20DB04
-:1024F000308C1658112BC020D10FDA20C0B65811DD
-:10250000BA63FFE400DA208B115811B763FFD900DA
-:102510009E178A132B210458104F8E17C0B02B24FE
-:102520006663FE34C08063FE09DA20DB308C16DD82
-:1025300050581233D2A0D10FDA205811AB63FFA844
-:102540002D2123C0C87DC30263FE0D8A132B2104F5
-:102550002C20669817B1CC0C0C472C246658103DE3
-:102560008E17C0D02D246663FDEE0000262123B017
-:102570006606064F262523656EF128206A7F8705AB
-:102580000829416490A5C0D01BE91C19E92B26201D
-:102590000723E61BB16609FA022BE61A28200A2D4A
-:1025A000E61D2AE61E09880228E61C88260606473C
-:1025B00028E6202B220826E53E2BE6212D24072C99
-:1025C00020062A206468C347B44463FE9EDB30DAE9
-:1025D000208D15C0CE2E0A802C24688C1658107BB6
-:1025E000D2A0D10F8E102A321616E8F30A2A1486CA
-:1025F000662BE61297E127E61328E614AA66096619
-:102600000296E02EEC4869ED50C14663FD7A000069
-:1026100064AFB419E8E928201689920A880C009161
-:102620000400881AA8B8982963FF9C002B21046E27
-:10263000B81E2C2066B8CC0C0C472C2466C9C09E52
-:10264000178A135810048E17C0348F20C0D02D2441
-:1026500066C06826240663FF2C008D35C08064D0D8
-:102660004AD9E0DC30DBE0DF301AE8F4B188B4FFAF
-:1026700017E8F486C9249DFF8DC82CCC102D463058
-:102680000767012D46320A66011DE8EE264631AD88
-:102690006D2D463326F21597B796B684C3BCBB940E
-:1026A000B58D35299C107D83C22F211DC14663FD48
-:1026B0004B0000006C1006292006289CF86582C398
-:1026C0002921022B200C09094C6590E116E8B90C70
-:1026D000BA11A6AA2DA2862C0A127DC3026002900E
-:1026E00019E8B509B90A2992A36890078C2009CC8A
-:1026F0000C65C27C29A2856492762D629E1AE8AB95
-:102700006FD8026002722AA22629160168A0082B3F
-:1027100022000ABB0C65B26029629DC18C6492588C
-:102720002A21200A806099102C203CC7EF000F3E20
-:10273000010B3EB1BD0FDB390BBB098F260DBD115F
-:102740002DDC1C0D0D410EDD038E27B1DD0D0D417D
-:102750000FEE0C0DBB0B2BBC1C0BB7027EC71C2C49
-:1027600021257BCB162D1AFC0CBA0C0DA16000099B
-:102770003E01073EB1780987390B770A77EB026093
-:10278000020A2C2123282121B1CC0C0C4F2C25230B
-:102790007C8B29B0CD2D2523C855DA20DB30580F8E
-:1027A000FA292102CC96C0E80E9E022E2502CC57B3
-:1027B000DA20DB30DC4058107AC020D10F2C2066A4
-:1027C0008931B1CC0C0C472C24666EC6026001D353
-:1027D00009FD5065D1CD2F0A012E30112922146434
-:1027E000E01128221B090C4400C10400FA1A0A88CF
-:1027F0000228261B2E3010C0A0C0B088301CE86E06
-:1028000094129513C04125203C2CC022088D1477CA
-:1028100087052F0A010CFA38C0F2C0840858010F4E
-:102820005F010F4B3805354007BB10C0F0084F382B
-:1028300008FF100FBB0228ECFEC0F0084F38842BB5
-:102840000BA8100AFF102A21200F88020B8802080B
-:10285000440218E87D8F110844022821250A2A1411
-:102860000828140488110A88022A210494F08B2075
-:1028700004E41008BB1104BB02C04A04BB029BF174
-:10288000842A08AB110BEB0294F40A54110B440296
-:102890000555100D1B4094F707BB100B550208554A
-:1028A00002C08195F68433C05094F3B1948B329575
-:1028B000F898F99BF2C080C1BC24261498FB9BF5C4
-:1028C00099FA853895FC843A94FD8B3B9BFE8839B8
-:1028D00098FF853525F6108436851324F6118B373D
-:1028E00084122BF612C0B064C08189307797468D70
-:1028F0003288332E30108F111CE840099940069918
-:10290000112CF614C0C42CF6158C2B2DF61A28F6B3
-:102910001B2BF61904A81109880208EE0219E835E4
-:10292000C18008EE0209C90229F6162EF618C09ECB
-:10293000600004000000C09A2F200C18E8250CFE4F
-:1029400011A8FFA6EE2DE2852BF4CF0D9D0B2DE6F1
-:1029500085C87F8A268929A7AA9A260A990C090977
-:102960004829252565504CC020D10F00C09A63FF2F
-:10297000C6DA2058109D63FE34DA20C0B658109A8B
-:1029800063FE2A00689738C020D10F0000DA20DBF0
-:1029900070581057C0B0C0C10ACA390ACB3865BDDB
-:1029A000E063FE098A102B2104580F2AC0B02B24A3
-:1029B0006663FE21DB402A2C7458090FD2A0D10F88
-:1029C000DA20580F2F63FCF76C1004C020D10F00E1
-:1029D0006C1004290A801EE81D1FE81D1CE7F50C79
-:1029E0002B11ACBB2C2CFC2DB2850FCC029ED19CA4
-:1029F000D0C051C07013E81914E81818E8162AB2AC
-:102A000085A82804240A234691A986B8AA2AB6854F
-:102A1000A98827849F25649FD10F00006C100AD6D7
-:102A200030283010292006288CF964829B68980B86
-:102A30002A9CF965A1B2022A02580F1189371BE7B7
-:102A4000DEC89164520E2A21020A0C4C65C2588DD0
-:102A50003019E7D774D7052E212365E29E2F929E69
-:102A60001AE7D36FF8026002532AA22668A0082C46
-:102A700022000ACC0C65C2442A929D64A23E9A159B
-:102A80001FE7CD8D67C1E664D00E2B620618E7CA3A
-:102A900064B0052880217B8B422B200C18E7C50CE5
-:102AA000BC11A8CC29C28679EB450FBE0A2EE2A341
-:102AB00068E0048F207EF9372CC2859C1864C233ED
-:102AC0002B212F87660B7B360B790C6F9D266ED2E0
-:102AD000462C203D7BC740CE5560001E2A200CC1ED
-:102AE000B28C205810759A1864A2458D6763FFCF89
-:102AF000C0C063FFC5D7B063FFD300C0E060000271
-:102B00002E60030EDB0C6EB20EDC700CEA11AA6AAA
-:102B10002AAC20580199D7A0DA20DB70C1C82D213A
-:102B20002058101B8C268B279A160CBB0C7AB334BA
-:102B30008F18896399F3886298F28E659EF82D60EC
-:102B4000108A189D1768D729C0D09DA92C22182B50
-:102B500022139CAB9BAA97A58E667E73026000979A
-:102B6000CF5860001FDA208B16580FE165A138633B
-:102B7000FFBDC081C0908F18C0A29AF999FB98FA46
-:102B800097F563FFD2DB30DA20DC40580F85C05167
-:102B9000D6A0C0C02BA0102CA4039B172C12080297
-:102BA0002A02066B02DF702D60038E179D149E10A3
-:102BB0000CDD11C0E0AD6D2DDC205801188C148B9C
-:102BC00016ACAC2C64038A268929ABAA0A990C9A04
-:102BD00026886609094829252507880C98662F222A
-:102BE00018A7FF2F261863FE96DA20DB30DC40DDC5
-:102BF00050581083D2A0D10FC0302C20668961B10B
-:102C0000CC0C0C472C24666EC6026000D2C0300982
-:102C1000FD5065D0CA8E6764E069647066DB608CC5
-:102C200018DF70DA202D60038E170CDD119E10ADB9
-:102C30006D2DDC201EE7845800F9232618DA208B3E
-:102C400016DC402F2213DD50B1FF2F2613580F241E
-:102C5000D2A0D10F0028203D084840658DE76F9530
-:102C60003EDA308DB56D990C8CA80C8C14CACF7CD3
-:102C7000D32D2AAC10C090292467090D4764DDC507
-:102C8000600092002C1208066B022D6C20077F0258
-:102C90008E17DA209E101EE76B58007D63FF9A00A6
-:102CA000C09163FFD1000000655081DA20DB60DC59
-:102CB00040580F3BC020C0F02FA403D10FDA20C032
-:102CC000B6580FC963FFE000006F950263FD6CDA30
-:102CD00020DB30DC40DD50C4E0580EBCD2A0D10F68
-:102CE0008A152B2104580E5B232466286010981740
-:102CF00063FF2100DA20580FBC63FFABC858DB30FC
-:102D0000DA20580EA12A210265AF9CC09409A902BD
-:102D100029250263FF91DB30DC40DD50C0A32E0A81
-:102D2000802A2468DA20580EA9D2A0D10FC020D161
-:102D30000FDA202B200C580FC563FF6B6C10042892
-:102D40002006C062288CF8658125C050C7DF2B2281
-:102D50001BC0E12A206B29212300A104B099292559
-:102D600023B1AA00EC1A0BC4010A0A442A246B04FA
-:102D7000E4390DCC030CBB012B261B6440692920D0
-:102D80000C1BE70B0C9A110BAA082FA2861BE70954
-:102D90006FF9026000B60B9B0A2BB2A368B0082C37
-:102DA00022000BCC0C65C0A42BA2851DE72D64B0BE
-:102DB0009B8C2B2421040DCC029CB08820C0C5081C
-:102DC00088110C880298B1882A08441198B48F346D
-:102DD00094B79FB5C0401EE6FE2DA2850E9E082525
-:102DE000E4CF2DDC282DA68529210209094C689401
-:102DF0001A689820C9402A210265A00B2A221E2B9E
-:102E0000221D7AB10265A079C020D10F2C21236543
-:102E1000CFDE6000082E21212D21237EDBD52B2241
-:102E20001E2F221D2525027BF901C0B064BFC413EB
-:102E3000E6DF2CB00728B000DA2003880A28824C8D
-:102E4000C0D10B8000DBA065AFE763FFA62A2C741E
-:102E5000C0B02C0A02580D951CE7039CA08B2008DB
-:102E6000BB1106BB029BA1893499A263FF790000C4
-:102E7000262468DA20DB30DC40DD50580FE1D2A098
-:102E8000D10FDA202B200C580F58C020D10F000092
-:102E90006C1006073D14C080DC30DB40DA20C047F0
-:102EA000C02123BC30032838080842774001B1DD37
-:102EB00064815A1EE6BB19E6BC29E67ED30F6DDAA3
-:102EC0000500508800308CC0E0C02025A03C14E6EE
-:102ED000BAB6D38FC0C0D00F87142440220F8940C8
-:102EE000941077F704C081048238C0F10B2810C019
-:102EF00044C02204540104FD3802520102FE380885
-:102F0000DD10821C07EE100E6E020EDD02242CFE78
-:102F1000C0E004FE380AEE100E88020D88028DAB68
-:102F20001EE6AA08D8020E880298B0C0E80428104D
-:102F30000E5E0184A025A125084411084402052540
-:102F400014045511043402C0810E8E3994B18FAA35
-:102F500084109FB475660C26A11FC0F2062614606B
-:102F60000009000026A120C0F20626140565020F04
-:102F7000770107873905E6100778100866020655BD
-:102F80000295B625A1040AE611085811082802087E
-:102F9000660296B7C060644056649053067E11C0C6
-:102FA000F489C288C30B340B96459847994618E6B6
-:102FB000919F410459110E99021FE68F020E470896
-:102FC000D80298420E99029F40C1E00E990299449E
-:102FD0002FA00CB4380CF91114E67E1EE675A4FF80
-:102FE000AE992E928526F4CF0E880B289685D10FA8
-:102FF0002BA00C1FE66F1CE6760CBE11ACBBAFEE2F
-:103000002DE28526B4CF0D3D0B2DE685D10FC08076
-:1030100005283878480263FEA263FE966C1006C04D
-:10302000C06570F18830C030088714778712C0B04F
-:10303000C0A619E661299022C030CC97C03160004B
-:1030400003C0B0C0A6C0E0C091C0D4C08225203C5F
-:103050000B3F109712831CC0700858010D5D0108CA
-:103060009738C0800B9838077710048810086802DA
-:10307000087702C0800D98382D3CFE0888100D9E00
-:10308000388D2B0AEE1008EE0207EE020CB8100F76
-:10309000DD02053B400EDD029D408920043D100805
-:1030A00099110D99022D210409A90208DD119941F8
-:1030B000872A05B9100D3D020ABB110DBB02087726
-:1030C0000297442821258712082814048811071E16
-:1030D0004007EE100E990275660926211F06261478
-:1030E000600006002621200626140868029B470976
-:1030F0008802984629200CD2C0C0800C9E111BE685
-:10310000341FE62BAB99AFEE2DE2852894CF0DADA1
-:103110000B2DE685D10FDD40C0A6C0B08E51CAE0B0
-:10312000B2AAB1BB2DDC108F500E783698100877FC
-:103130000C9FD898D989538F52991199DB9FDA7EC9
-:103140008309B1CC255C10C97763FFCF88108D113E
-:1031500008E70C9751AD8DD7F078DB01B1F79D539F
-:1031600097528830C030088714088840648ED5652F
-:10317000BEC963FEBC0000006C1004D720B03A88C2
-:1031800020C0308221CAA0742B1E2972046D080F42
-:10319000C980C9918575B133A2527A3B0B742B0853
-:1031A00063FFE900649FECD10FD240D10F00000013
-:1031B0006C1008D630C0709515DA408E3914E5FED3
-:1031C0009A1464E0026451FC2920062A9CF865A246
-:1031D0005F2A21020A0B4C65B21F2C320015E5F460
-:1031E00074C7052D212365D3242E529E1AE5F06F56
-:1031F000E80260021B2AA22668A0082B22000ABB54
-:103200000C65B20C2E529D1DE5EB64E2038B386415
-:10321000B22D9E16C8BC8D691EE5E864D0052EE06F
-:10322000217BEB492E200C18E5E20CEF11A8FF29B9
-:10323000F286C186798B4A17E5DF07E70A2772A372
-:10324000687004882077893925F2856452A2272185
-:103250002E07B73607B90C6F9D01D7B089696E92FA
-:103260004228203D7B873C8A15CDAF600018C1B253
-:103270008C202A200C580E90D5A064A2AC8B6863D9
-:10328000FFCBC05063FFC3C0E06000022E60030E9E
-:103290009B0C6EB20EDC700CEA11AA6A2AAC285B99
-:1032A000FFB6D7A0DA20DB70C1C42D211F580E381D
-:1032B0008C268B27D4A00CBB0C7AB3258A63C090D4
-:1032C0009A538862995898528F659F598E679E5B72
-:1032D0008D6697559D5A8B687B7B748B15CEB3603A
-:1032E000000DDA20DB40580E0265A10D63FFCC0013
-:1032F000DA20DB308C14580DAAD6A0C0C0C0D19DF6
-:10330000152CA403DA20DB60DF70DC50C0E0256000
-:10331000039E101EE5C10C5D11AD6D2DDC285BFF19
-:103320003F8E66A5A88F67286403AF7F77FB01B146
-:10333000EE9E669F678D268C29A4DD0DCC0C9D2604
-:103340008B680C0C482C252507BB0C9B6863FEC3BF
-:103350002C20668961B1CC0C0C472C24666EC60209
-:103360006000B809FD5065D0B2CBBF8E69CBEBDBF6
-:1033700060DC50DF70DA201EE5BC2D6003C0809851
-:10338000100CDD11AD6D2DDC285BFF248B15C942BF
-:103390008A2629220904AA082A26060A990C09095C
-:1033A0004829252565B13CC020D10F00DB602D6C7C
-:1033B00028DF70DA20C0C01EE5AC9C10DC505BFE3C
-:1033C000B463FFC7002D203D0D4D4065DDF96FE56D
-:1033D00022DA308F456DE90C8EAA0E8E14C9E37E79
-:1033E000F3112AAC10C090292467090F4764FDD758
-:1033F00060014100C09163FFED00881565814CDAE2
-:1034000020DB608C14580D66C020C09029A403D125
-:103410000FDA20C0B6580DF463FFDE008A162B21A8
-:1034200004580C8CC0A02A24668B6863FF3A000005
-:10343000002B9CF965B0C5DA20580C9163FD910012
-:103440002B200C0CBA11A5AA2FA286C1C27FC302E1
-:103450006000FC0DB90A2992A36890078C2009CC62
-:103460000C65C0EB26A2856460E52C20668931B12D
-:10347000CC0C0C472C24666FC60270960ADAE02B3F
-:103480002104580C74272466893077974B18E55926
-:103490001DE55A8A328B33C0F42C2104099E400664
-:1034A000EE1104CC110ECC029F61C1E00ECC029D46
-:1034B000608F2B9A669B679C64976508FF029F62EA
-:1034C0002F200C18E5430CFE11A5EE2DE285A8FF78
-:1034D00027F4CF2DDC202DE6858F1565F091C020D7
-:1034E000D10F00002A2C748B14580643D2A0D10FA0
-:1034F00000DA20DBE0580DBC63FEFE0000DA20DBC2
-:10350000308C148D15580E3ED2A0D10F00008815B6
-:10351000C888DA20DB30580C9C2A210265AEDAC05C
-:103520009409A90229250263FECFDA202B200C582A
-:103530000DC763FEC4272468DA20DB302C12042D6B
-:1035400012052E0A80580CA163FC7C00C020D10F0C
-:10355000DA20580DA58A15CDA1DA20033B022C12E2
-:1035600004580D0F27A403C020D10F00C020D10F95
-:103570002A2C748B14580620D2A0D10F6C100C2862
-:103580002102941008084C6583621FE50929F29E08
-:103590006F98026003661DE50529D2266890082A07
-:1035A000220009AA0C65A3542CF29D64C34E2B2063
-:1035B0000C0CB611AF66286286C1EC78E30260039A
-:1035C0004619E4FC09B90A2992A36890078A2009E0
-:1035D000AA0C65A33224628564432CC0E12A310918
-:1035E000C07027246689359A11992A8836991298CD
-:1035F0002B89379813992C883899140858149815E2
-:10360000982D89392A25042E251D29251C28302886
-:10361000C09228243C2A30290808479816098901B5
-:103620002A243D2A311599170A094109A90C299C18
-:10363000EC29251F7E87192D2A000DA06000083E69
-:10364000010A3EB1AD08DA390EAA110A990C2925F2
-:103650001F2A211F18E5060A8160C1D0941A951B04
-:1036600001083E00053EB184054839843C259CFC98
-:103670000D883629201408AA1C8D3D2726182E26D1
-:10368000132E26142E261527261B2E246B2724677F
-:1036900027246808581C0909432924142932112AAF
-:1036A000252E28252F27252427252527252C2725A6
-:1036B000232525202425212D2522841A2D211C8512
-:1036C0001B6FD202600209C0A099186D080AB1AA46
-:1036D00000A10400E91A7D9B0263FFEE8918C080F7
-:1036E000C0E1C070C0D29B1D951B961C9C1E16E4A9
-:1036F000D12C203D15E4E00C0B400DCC010BE7383C
-:103700001DE4C30A77100CE8380B8810C0C49C4134
-:103710000877029D40B0A80988118B209C499D48DC
-:10372000954B9643087702861418E4D115E4B9083E
-:10373000770205BB029B4A9B429746881287110875
-:10374000DA149A4E0D88100D77110877021AE4AC3E
-:1037500006D8140D6610087702974FC78F984D98BA
-:103760004C9845871598440715140D55110A5502B4
-:10377000954715E4C18A262D46102D46182D462062
-:103780002C46112C46192C46212B46122B461A2862
-:1037900046142846152B46228816254624254626FB
-:1037A0008B170A0C48090D4885130EDD1105CC1145
-:1037B0000839400BEB390299101EE4B00DCC020D14
-:1037C0005511082D400655022E461316E47B0FDDD9
-:1037D00011254616080840851B0188100DBB02867E
-:1037E000671DE4A70988020CBB0219E4771CE4A555
-:1037F0002B46172D461BA7661BE4A4C0702C461C45
-:103800000988028C1E28461E2B4623C0908B1D293A
-:10381000461D29461F18E49D29462728462529319B
-:10382000162E200629246A243117962D2425238656
-:103830001CCCE1272407C0D7090E4064E0829A29F6
-:1038400009284164809164409B2D2406C098094951
-:1038500036280AA024628501C404A844282104242F
-:1038600066850888118E3F8A3E2D32100EA41800FE
-:10387000C4040EAE1800EE110ACA530EDD02C0E3F6
-:103880000E880298C11EE48209084E9EC08E2094C4
-:10389000C398C59DC418E44E1DE47F05EE110EAA21
-:1038A000020DAA02A8B82784CF9AC21EE44024F2CF
-:1038B0009D27E4A2244C1824F69D655052C020D1C7
-:1038C0000F2D2406C0A0C09809493604A93863FF0B
-:1038D0007FC0A063FE070000654F6DC098C0A82A96
-:1038E000240663FF6B2D2406C09063FF63CC57DA78
-:1038F00020DB308C10580C2AC020D10F00DA20C0F9
-:10390000B6580CB963FFE500DA20580CB763FFDC4A
-:103910002A2C748B10580538D2A0D10F6C100628B1
-:1039200020068A336F8202600161C05013E42029AF
-:10393000210216E41F699204252502D9502C201576
-:103940009A2814E41D8F2627200B0AFE0C04770901
-:103950002B711C64E1398E428D436FBC0260016F94
-:1039600000E104B0C800881A08A80808D8029827FF
-:103970002B200668B32ECE972B221E2C221D011160
-:10398000027BC901C0B064B0172CB00728B000DAC0
-:103990002003880A28824CC0D10B8000DBA065AFD1
-:1039A000E7C020D10F2D206464DFCA8B29C0F10B42
-:1039B000AB0C66BFC02B200C0CBC11A6CC28C28659
-:1039C0002E0A0878EB611EE3FB0EBE0A2EE2A36806
-:1039D000E0052822007E894F29C2851EE4076490F5
-:1039E000461FE4159E90C084989128200A95930F55
-:1039F000880298928E200FEE029E942F2007882630
-:103A00002F950A98969A972E200625240768E34357
-:103A10002921022AC2851DE3EE2AAC20ADBD25D4A2
-:103A2000CF2AC68563FF4E002E2065CBEDC08228CD
-:103A30002465C9F605E4310002002A62821BE3F71F
-:103A40002941020BAA022A668209E4312921026374
-:103A5000FF23000064DFB88F422E201600F1040D12
-:103A6000EE0C00EE1AAEAE9E2963FFA38A202B3225
-:103A700021B1AA9AB0293221283223B499293621BA
-:103A80007989A92B32222B362163FFA0C020D10FC8
-:103A90009F27252415ACB828751C2B2006C0C12EE5
-:103AA000BCFE64E0AB68B7772DBCFD65DEC72D209A
-:103AB00064C0F064D0868E290EAE0C66E089C0F139
-:103AC00028205A288CFE08CF3865FEE863FF58008E
-:103AD00000E0049310C0810AF30C038339C78F08F8
-:103AE000D80308A80108F80C080819A83303C80C63
-:103AF000A8B828751C030B472B24158310CBB700DF
-:103B0000E104B0BC00CC1AACAC0CDC029C27659E76
-:103B10005EC0B20B990209094F29250263FE5000CD
-:103B20002D206A0D2D4165DF7EDA20C0B0580C755E
-:103B300064AF18C0F163FEEF9F2763FFD02E221FF2
-:103B400065EE3263FF79000028221F658E2763FF30
-:103B50006E252406252502C09063FE196C100665AB
-:103B600071332B4C18C0C7293C18C0A1C08009A8CC
-:103B7000380808426481101CE38A1AE38B2AC67E47
-:103B80002A5CFDD30F6DAA0500B08800908C894097
-:103B9000C0A00988471FE3B4080B47094C50090D22
-:103BA0005304DD10B4CC04CC100D5D029D310CBB70
-:103BB000029B3088438E2098350FEE029E328D2670
-:103BC000D850A6DD9D268E40C0900E5E5064E097D2
-:103BD0001CE39A1EE389038B0BC0F49FB19EB02DAA
-:103BE000200A99B30CDD029DB28F200CFF029FB416
-:103BF0008E262D20079EB68C282DB50A9CB7292429
-:103C0000072F20062B206469F339CBB61DE36B2305
-:103C100020168DD20B330C00D10400331AB48DA3BF
-:103C2000C3932922200C13E36A1FE3610C2E11AF0A
-:103C3000EEA3222924CF2FE285D2A00FDD0B2DE6A3
-:103C400085D10F002E200CB48C0CEB111FE3611DED
-:103C5000E358AFEEADBB22B28529E4CF02C20B22FE
-:103C6000B685D2A0D10F00002E200C1CE3511FE31B
-:103C7000580CEB11AFEEACBB22B28529E4CF028227
-:103C80000B22B685D2A0D10FC0D00BAD387DC802B3
-:103C900063FEEC63FEE08E40272C747BEE12DA703C
-:103CA000C0B32C3C18DD50580A7B8940C08063FEAD
-:103CB000E3DE60DA20DB30DC40DD505800059A108E
-:103CC000DB50077A0258044C881063FEF8000000AD
-:103CD0006C100692121EE3428C40AE2D0C8C472EC7
-:103CE0003C1804CA0BD9A07DA30229ADF875C30204
-:103CF000600084C0B0C023C0A09D106D0844B89F70
-:103D00000EB80A8D900EB70BB8770D6D36ADAA9D23
-:103D1000800D660CD8F000808800708C879068B1A8
-:103D200024B22277D3278891C0D0CB879890279C44
-:103D30001000708800F08C9D91CB6FC08108BB0390
-:103D400075CB3663FFB4B1222EEC1863FFD4859295
-:103D50000D770C86939790A6D67D6B01B1559693FF
-:103D60009592600016B3CC2D9C188810D9D078D3CA
-:103D7000C729DDF863FFC100C0238A421BE3470067
-:103D8000CD322D44029B3092318942854379A10581
-:103D90001EE3430E550187121BE334897095350BE2
-:103DA0009902993288420A880C98428676A6A6968D
-:103DB000768F44AFAF9F44D10F0000006C10089382
-:103DC00011D6308830C091086351080847059838EB
-:103DD0009812282102293CFD08084C6581656591EF
-:103DE000628A630A2B5065B18B0A6F142E0AFF7C1E
-:103DF000A60A2C205ACCC42D0A022D245A7FE00298
-:103E0000600215892888261FE32609880C65820F21
-:103E10002E200B0FEE0B2DE0FE2EE0FF08DD110E25
-:103E2000DD021EE320AEDD1EE3201CE3200EDD01DB
-:103E30000DCC37C180084837B88DB4889810896098
-:103E40001AE2DE7B96218B622AA0219C147BA317A9
-:103E50009D132A200C8B108C20580B978C148D13DB
-:103E6000DBA0CEAC6001C4002E200C1BE2D10CEA1A
-:103E7000110BAA082BA2861FE2CF7BDB3B0FEF0AB8
-:103E80002FF2A368F0052822007F892C2BA28564DD
-:103E9000B0AA87628826DE700C7936097A0C6FAD7D
-:103EA0001C8F279B1508FF0C77F3197E7B729D13DF
-:103EB0009C149B15CF56600025C0B063FFD0D790EF
-:103EC00063FFDD00009D139C14DA20DB70580B08A3
-:103ED0008B158C148D1365A06A8E6263FFCC00DA9B
-:103EE000208B11DC40580AAED6A08B15C051DE7075
-:103EF000DA20DC60DD405BFF768D138C14D9A02EB8
-:103F0000200C1BE2AB1FE2B20CEA11AFEFC0E0AB3A
-:103F1000AA2BA2852EF4CF0B990B29A68563FF1D32
-:103F200000DA20DC60DD40DE708912282007DF50D7
-:103F3000A9882824075BFF09D2A0D10F00DBE0DAB3
-:103F400020580B296550EF2A20140A3A4065A0EB4F
-:103F5000DB60DC40DD30022A0258099CD6A064A058
-:103F6000D584A183A0040447030547951203635138
-:103F7000C05163FE5C2C2006D30F28CCFD6480A5C5
-:103F800068C704C0932924062C2006C0B18D641F85
-:103F9000E28A9D279D289D298FF29D2600F104002D
-:103FA000BB1A00F004B0BE0EDD01C0F0ADBB8D65E4
-:103FB0002F24070D0E5E01EE11AEBB2E0AFEB0BB24
-:103FC0000B0B190EBB36C0E20B0B470EBB372B2475
-:103FD0001618E2820A09450D0B422B240B29240AEC
-:103FE000B4BE2E240C7D88572920162FCCFDB09D01
-:103FF0000A5C520DCC362C246465FDEC0C0C476435
-:10400000CDE618E26D8E2888820C9F0C008104009A
-:10401000FF1AAFEE9E2963FDCF1CE29C63FE1300E6
-:104020001CE29363FE0C8D6563FFA500DA202B2054
-:104030000C580B06645F0FC020D10F00C020D10FB9
-:10404000C093292416C09363FFA000006C1004C025
-:104050006017E2561DE259C3812931012A3008292F
-:10406000240A78A108C3B27BA172D260D10FC0C16B
-:104070006550512625022AD0202F200B290AFB2B20
-:1040800020142E201526241509BB010DFF0928F147
-:104090001C2B2414A8EE2EF51C64A0B52B221E2880
-:1040A000221D0111027B8901DB6064B0172CB0076F
-:1040B00028B000DA2007880A28824CC0D10B800083
-:1040C000DBA065AFE7DB30DC40DD50DA205800D8FC
-:1040D000292102090B4CCAB2D2A0D10F00CC5A2C14
-:1040E00030087BC1372ED02064E02D022A02033B2A
-:1040F00002DC40DD505800CED2A0D10F2B2014B0EE
-:10410000BB2B24140B0F4164F0827CB7CAC0C10CD6
-:104110009C022C2502D2A0D10FC020D10F2E200648
-:1041200069E2C12F21020F0F4C69F1B8262406263F
-:1041300025022B221E28221D2A200B2920150DAA1C
-:10414000092CA11C262415AC9929A51C7B814A6049
-:104150000049B0BB2B24140B0D41CBD67CB7022CED
-:1041600025022B221E2E221D7BE9022B0A0064B0A1
-:10417000172CB00728B000DA2007880A28824CC024
-:10418000D10B8000DBA065AFE7C020D10F2624064D
-:10419000D2A0D10F26240663FFC7DB601DE20764AF
-:1041A000BF422CB00728B000DA2007880A28824CCA
-:1041B000C0D10B8000DBA065AFE71DE1FF63FF24EA
-:1041C0006C1004282006C0646F8564CA5B29201423
-:1041D0007D9726DA20DB30DC40055D025800192986
-:1041E0002102090A4CC8A3C020D10F00C0B10B9B0B
-:1041F000022B2502C020D10F0000022A02033B023D
-:104200002C0A015800CAC9AADA20DB30DC40580960
-:10421000E429A011D3A07E97082C0AFD0C9C012C48
-:10422000A411C0512D201406DD022D241463FFA219
-:10423000DA20DB30DC40DD50C0E0580964D2A0D188
-:104240000F0000006C100616E1DA1CE1DA65513B44
-:10425000C0E117E1D62821028B2008084C65807B3D
-:104260002932000969516993722A629E6EA8482A10
-:10427000722668A0027AB93F2A629DB44FCBA72B61
-:10428000200C0CBD1106DD0828D28678FB150CBF6A
-:104290000A2FF2A368F00488207F89072DD285D3E6
-:1042A0000F65D0602A210419E202D30F7A9B1DDA30
-:1042B00020580864600024002C21041BE1FD7CBB15
-:1042C00013DA20C0B658085FC9536000EFDA2058EF
-:1042D0000A46600006DA20C0B6580A436550DDDCA5
-:1042E00040DB308D30DA200D6D515808B8D3A06412
-:1042F000A0CA1CE1B0C05184A18EA00404470E0ED8
-:104300004763FF50002B2104C08C8931C070DF70DF
-:1043100009F950098F386EB8172C2066AECC0C0CFA
-:10432000472C24667CFB099D105808CA8D10272451
-:104330006694D11EE1B6B8DC9ED0655056C0D7B8A1
-:104340003AC0B1C0F00CBF380F0F42CBF119E19465
-:1043500018E19628967EB04BD30F6DBA0500A08861
-:1043600000C08C2C200CC0201DE19A0CCF11A6FFA0
-:104370002EF285ADCC27C4CF0E4E0B2EF685D10F75
-:10438000C0800AB83878D0CD63FFC1008E300E0EE1
-:104390004763FEBD2A2C742B0A01044D025808BD48
-:1043A0002F200C12E18B0CF911A699A2FF27F4CF54
-:1043B000289285D2A008480B289685D10FC020D11D
-:1043C0000F0000006C1004C060CB55DB30DC4005F2
-:1043D0005D02022A025BFF9B29210209084CC88268
-:1043E000D2A0D10F2B2014B0BB2B24140B0C41CB2B
-:1043F000C57DB7EBC0C10C9C022C2502D2A0D10F09
-:104400000000022A02033B02066C02C0D0C7F72E4E
-:10441000201428310126250228240A0FEE012E241B
-:104420001458010D63FFA300262406D2A0D10F006B
-:104430006C1006282102D62008084C65809D2B2090
-:104440000C12E15B0CB811A2882A8286B5497A93D6
-:104450000260009719E15809B90A2992A3689008E7
-:104460002A620009AA0C65A0822882851CE1636487
-:1044700080799C80B887B14B9B819B10655074C03C
-:10448000A7D970280A01C0D0078D380D0D42CBDEA8
-:104490001FE1441EE1452EF67ED830D30F6D4A054C
-:1044A00000808800908C2E3008C0A000EE322E7460
-:1044B0000028600C19E1470C8D11A2DDA988C020ED
-:1044C0002CD2852284CFD2A00CBC0B2CD685D10F48
-:1044D000C0F0038F387FA0C063FFB400CC582A6CB3
-:1044E00074DB30DC405807F1C020D10FDA60580986
-:1044F000BE63FFE7DD402A6C74C0B0DC705808650D
-:104500002E30088B1000EE322E740028600C19E15A
-:10451000300C8D11A2DDA988C0202CD2852284CF39
-:10452000D2A00CBC0B2CD685D10F00006C10042936
-:104530002014282006B199292414688124C0AF2CA6
-:104540000A012B21022C24067BA004C0D02D2502B9
-:10455000022A02033B02044C02C0D05800BFD2A082
-:10456000D10FC020D10F00006C1004293101C2B45A
-:1045700029240A2A3011C28378A16C7BA169645076
-:10458000472C2006C0686FC562CA572D20147CD7FF
-:1045900022DA20DB30DC40DD505BFFA52921020957
-:1045A0000E4CC8E2C020D10FC0F10F9F022F250290
-:1045B000C020D10FDA20DB30C0C05BFFDC28201424
-:1045C00006880228241463FFC72920151BE0FB2A54
-:1045D000200BC0C09C240BAA092BA11C2C2415ABBA
-:1045E0009929A51C63FF9900C020D10FDA20DB3088
-:1045F000DC40DD50C0E0580875D2A0D10F000000AB
-:104600006C1004CB5513E0F625221F0D46110655FC
-:104610000CA32326221E25261F06440B24261E73C8
-:104620004B1DC852D240D10F280A80C04024261FFB
-:10463000A82828261E28261DD240D10FC020D10F21
-:10464000244DF824261E63FFD80000006C100428B7
-:104650002006D6206E85026000DE17E0D51DE0DC66
-:1046600019E0D5C0C1C0202A8CFC64A1322B6102A4
-:10467000B44E0B0B4C65B0A82B600C2A62000CB832
-:10468000110788082F828609B90A7FE30260009F1C
-:104690002992A368900509AA0C65A09328828564D5
-:1046A000808DB8891BE0DA94819B8065514DC0B73D
-:1046B000B838C0A1C0E009AE380E0E4264E0481A16
-:1046C000E0B81FE0B92FA67EB04A6DAA0500808829
-:1046D00000908CC0A02E600C0CE811A7882F82855A
-:1046E000ADEE0F4F0B2F86852B600622E4CF68B10D
-:1046F0002A296015C0B2C99AD2A02D61022B640686
-:104700000CDD022D6502D10FC0E008AE387EB0B7D7
-:1047100063FFAB00226406D2A0D10F00D2A0D10F5C
-:1047200000CC57DA60DB30DC4058089DC020D10F48
-:10473000DA6058092D63FFE80028221E29221D781F
-:104740009902280A00C176C1C1C1D21BE0A5C124CB
-:10475000AB6B6480437891402A80000CAF0C64F00E
-:10476000AE0DAE0C64E0A802AF0C64F0A207AE0C74
-:1047700064E09C2FACE864F0962EACE764E0902FE8
-:10478000ACE664F08A2A800708A80B088A027B83BB
-:10479000022A8DF8D8A065AFBBC0906000730000FE
-:1047A0002B600C0CB811A7882E82866EE87909BAA6
-:1047B0000A2AA2A368A0048E607AE96B2A82856423
-:1047C000A0651FE08DC0E32E64069EA19FA01FE0A0
-:1047D000B92E600A92A30FEE029EA28E600FEE0227
-:1047E0009EA42F60147AFF4722A417ADBE2F8285A6
-:1047F00022E4CF2FFC182F868563FE702A6C74C0CC
-:10480000B1DC90DD405807A31DE072C0C163FEC457
-:10481000D9A0DA60DB30DC40DD50C2F0C1E009FE37
-:10482000395807EAD2A0D10FDA605808EF63FEF0DA
-:104830002CA4170DBE0829828522E4CF299C1829B3
-:10484000868564500C2A6C74044B0258016BD2A00C
-:10485000D10FC020D10F00006C10062B221E282281
-:104860001D93107B8901C0B0C0C9C03BC1F20406D2
-:10487000401DE05BC0E2C0740747010E4E01AD2D44
-:104880009E11C0402E0A1464B06E6D084428221D8B
-:104890007B81652AB0007EA13B7FA1477B51207CB4
-:1048A000A14968A91768AA1473A111C09F79A10C26
-:1048B000C18B78A107C1AE290A1E29B4007CA12BA7
-:1048C0002AB0070BAB0BDAB07DB3022ABDF8DBA030
-:1048D000CAA563FFB428B01089116987BB649FB86B
-:1048E00063FFDC00647FB463FFD50000646FD0C059
-:1048F00041C1AE2AB40063FFC62B2102CEBE2A22DC
-:104900001D2B221E7AB12A8C107CB1217AB901C0EC
-:10491000B0C9B913E026DA2028B0002CB00703880C
-:104920000A28824CC0D10B8000DBA065AFE7D240E3
-:10493000D10F8910659FD463FFF300006C1008C08D
-:10494000D0C8598C302921020C0C4760000C8E30E5
-:104950000E1E5065E19E292102C0C116E015090B0B
-:104960004C65B0908A300A6E5168E3026000852F72
-:10497000629E1BE00E6EF8532BB22668B0052E2205
-:10498000007BE94727629DB748CB7F97102B200C0F
-:10499000B04E0CBF11A6FF29F2869E12798B4117EB
-:1049A000E00507B70A2772A368700488207789306A
-:1049B00029F285DF90D7906590652A210419E03CA3
-:1049C0007A9B22DA2058069F600029002C21041BC4
-:1049D000E0387CBB18DA20C0B658069AC958600186
-:1049E0004CC09063FFCCDA2058087F600006DA20C4
-:1049F000C0B658087D655135DC40DB308D30DA209B
-:104A00000D6D515806F2C0D0D3A064A12029210217
-:104A1000C05184A18CA00404470C0C4763FF3E00E6
-:104A2000C09C8831DBD008F850089B3828210498B6
-:104A3000116E8823282066AC8C0C0C472C24667CD5
-:104A4000BB159F139E148A108B115807028E148F6A
-:104A500013C0D02D24668A30C092C1C81BDFEC7F02
-:104A6000A6099BF099F12CF40827FC106550A4B816
-:104A70003ADF70C051C08007583808084264806728
-:104A800018DFC819DFC929867E6A420AD30F6DE98B
-:104A90000500A08800F08CC0A08930B4E37F962880
-:104AA000C0F207E90B2C94089B909F912F200C12C9
-:104AB000DFC80CF811A688298285A2FF2DF4CFD279
-:104AC000A009330B238685D10F22200C891218DF11
-:104AD000C00C2B11A6BBA8222D24CF2CB285D2A0AE
-:104AE0000C990B29B685D10FC087C0900A59387927
-:104AF000809663FF8ADB30DA20C0C1C0D05BFF56EE
-:104B0000292102C0D02A9CFE65AE4D2D2502C09001
-:104B100063FE45009E142A2C74C0B1DC70DD405841
-:104B200006DD8E14C0D01BDFB9C1C863FF6AC02088
-:104B3000D10F00006C100628210216DF9D08084CDA
-:104B400065821929629E6F980260022019DF9829F8
-:104B500092266890078A2009AA0C65A20F27629DF9
-:104B6000C0CC6472072B21048E31C0A0DDA00EFEE4
-:104B7000500ECD386EB8102C2066B1CC0C0C472CE2
-:104B800024667CDB026001EFC0C12930081BDF8A8C
-:104B900064909C2F0AFFC0D3B09E64E10268921318
-:104BA0006450882A2C74044B025800930AA202060F
-:104BB000000000002B200C2721040CBC11A6CC29DE
-:104BC000C286280A087983026001B919DF7A09B917
-:104BD0000A2992A36890082E220009EE0C65E1A430
-:104BE0002EC28564E19E26200713DF836E7B026060
-:104BF000019A17DF7A1FDF8319DFB0C0D228200A9D
-:104C000093E09DE1A9690F880298E22F90802A9491
-:104C100080B1FF07FF029FE32EC2851FDF6D0EDE0E
-:104C20000BAFBF2AF4CF2EC685655F76C020D10FAB
-:104C30002830102930112E301300993200ED3264E3
-:104C400080EE2A30141FDF9D00AA3278EF050F9EF8
-:104C5000092DE47F1EDF9B66A0050F98092A84803A
-:104C6000B4A718DF98C76F009104AE9EDDE000AFD7
-:104C70001A00C31A6EE1052DB2000DED0C1EDF9275
-:104C800008D81C063303AE882A848B2EB02E2784C6
-:104C90008C03EE010FEE022EB42E58018F63FEFF3F
-:104CA0002931082925042830142E3109B088648060
-:104CB000A32E240AC0812E30162CB4232E240BB42C
-:104CC000EF2F240C8C378B36292504DEB0DFC00C87
-:104CD0008F390B8E390FEE0264EEC4089F1101C4A8
-:104CE000048D380CB81800C4040CBE1800EE110E68
-:104CF000DD02C0E30EFF021EDF669F719E701EDFA5
-:104D0000658F2098739D7405FF110BCD53C180985A
-:104D1000750FDD020EDD029D721EDF242A24662F30
-:104D2000629D2AE4A22FFC182F669D63FE7100008D
-:104D3000002F30121BDF6600FA3278FF050B980B4C
-:104D40002A847F66D0050B9A0B2DA4802A3011008F
-:104D5000AA3263FF442F240A9E2B63FF56CC57DAF6
-:104D600020DB30DC4058070EC020D10F00DA20C015
-:104D7000B658079D63FFE500DA70580636C0A02AD2
-:104D8000246663FE02DA2058079863FFCFB16928D2
-:104D9000200A8620090947991129240798107F8144
-:104DA0002693E027E50A9AE388109DE119DF428DFA
-:104DB00011096F029FE42DE416098802C0D398E21E
-:104DC0002A240763FE5100001DDF0B0868118F11B4
-:104DD000892B93E008FF02C08F9FE50D990299E2AD
-:104DE000047F11C0D49DE108FF029FE463FFD0005F
-:104DF0006C1004C020D10F006C100485210D3811F7
-:104E000014DEE98622A42408660C962205330B934F
-:104E100021743B13C862D230D10FC030BC29992114
-:104E200099209322D230D10F233DF8932163FFE3E1
-:104E30006C100AD620941817DEDED930B8389819CD
-:104E40009914655252C0E1D2E02E61021DDEDB0EE4
-:104E50000E4C65E1628F308E190F6F512FFCFD658E
-:104E6000F1558EE129D0230E8F5077E66B8F181EF7
-:104E7000DF18B0FF0FF4110F1F146590CE18DF1567
-:104E80008C60A8CCC0B119DEC928600B09CC0B0D11
-:104E9000880929811C28811A2A0A0009880C08BA65
-:104EA000381BDF0B0CA90A2992947B9B0260008CB3
-:104EB0002B600C94160CBD11A7DD29D286B8487959
-:104EC00083026000D219DEBB09B80A2882A39817B2
-:104ED0006880026000A36000A51ADEFF84180AEE55
-:104EE00001CA981BDEB28C192BB0008CC06EB313B4
-:104EF0001DDEAF0C1C520DCC0B2DC295C0A17EDB6C
-:104F0000AE6000380C0C5360000900000018DEF1A0
-:104F10008C60A8CCC0B119DEA528600B09CC0B0DA4
-:104F2000880929811C28811A2A0A0009880C08BAD4
-:104F3000380CA90A2992947E930263FF72DA60C04A
-:104F4000BA58072964507360026600001ADE988C14
-:104F5000192AA0008CC06EA31A18DE940C1C5208EB
-:104F6000CC0B18DEDB2BC295C0A178B30263FF3FE8
-:104F700063FFC9000C0C5363FF09896078991829F5
-:104F8000D285C9922B729E1DDE896EB8232DD22642
-:104F9000991369D00B60000DDA6058071360001791
-:104FA0000088607D890A9A1A29729D9C129915CFF2
-:104FB00095DA60C0B658070C6551F58D148C18DB76
-:104FC000D08DD0066A020D6D51580580D3A09A1479
-:104FD00064A1DD82A085A1B8AF9F19050547020233
-:104FE000479518C05163FE602B6104C08C8931C0A5
-:104FF000A009F950098A386EB81F2C6066A2CC0C43
-:105000000C472C64667CAB119F119E1B8A155805BA
-:10501000918E1B8F11C0A02A64669F1164F0E12954
-:1050200012032812096DF9172F810300908DAEFE2F
-:105030000080889F9200908C008088B89900908CA6
-:1050400065514E8A10851A8B301FDE6B88122960DD
-:105050000708580A2C82942D61040ECC0C2C8694DF
-:105060006FDB3C1CDE95AC9C29C0800B5D50A29987
-:1050700009094729C48065D0DA2E600CC0D01FDE34
-:10508000540CE811AFEEA7882282852DE4CF0242AE
-:105090000B228685D2A0D10F8E300E0E4763FDA65F
-:1050A000A29C0C0C472C64077AB6CD8B602E600A4C
-:1050B000280AFF08E80C64810E18DE7E831682132E
-:1050C000B33902330B2C34162D350AC02392319F8D
-:1050D00030C020923308B20208E80292349832C0FD
-:1050E000802864072B600CD2A01CDE390CBE11A7EF
-:1050F000EE2DE285ACBB28B4CF0D9D0B2DE685D1FE
-:105100000F8B1888138D30B88C0D8F470D4950B414
-:10511000990499100D0D5F04DD1009FF029F800DA9
-:10512000BB029B8165508D851AB83AC0F1C0800CD6
-:10513000F83808084264806B1BDE1A19DE1B29B69A
-:105140007E8D18B0DD6DDA0500A08800C08CC0A08F
-:1051500063FEF30082138B161DDE2B28600AC0E06D
-:105160002EC4800D880202B20B99239F20C0D298D2
-:10517000229D2122600CB2BB0C2D11A7DD28D28507
-:1051800008BB0B18DE132BD685A8222E24CFD2A065
-:10519000D10F9E1B851A2A6C748B185BFF178E1B10
-:1051A00063FEA300C087C0900AF93879809263FF3C
-:1051B00086C020D10F9E1B2A6C74C0B18D18580573
-:1051C000358E1B851A63FE7E886B8213891608BE96
-:1051D000110ECE0202920B9E25B4991EDE069F2070
-:1051E0000E88029822C0EF04D8110E88029824C0BD
-:1051F000E49E21C080D2A02B600C2864071CDDF443
-:105200000CBE11A7EE2DE285ACBB28B4CF0D9D0BD3
-:105210002DE685D10F0000006C1004C020D10F00D6
-:105220006C10048633C071C030600001B1330031AE
-:105230000400741A0462017460F1D10F6C1004024E
-:105240002A02033B025BFFF61CDDDC1BDE24C79F4A
-:1052500088B009A903098A019AB079801EC0F00FAD
-:10526000E4311DDDD30002002BD2821EDE1D2AC1D7
-:10527000020EBB022BD6820AE431D10F28C102C133
-:105280009009880208084F28C50208E431D10F00B0
-:105290006C1004C0C00CE43112DDC81ADDC5000278
-:1052A0000029A28218DE111BDE0F2621020B9901B4
-:1052B00008660129A68226250206E43114DE0C15B3
-:1052C000DE07236A902326128550242611252613F3
-:1052D000222C40D10F0000006C1008D6102B0A645D
-:1052E000291AB41ADDB20D23111CDDB30F2511B834
-:1052F0001898130E551118DDFEAC55A838AA332C9A
-:1053000080FF2A80FEA933288D0129800108AA1177
-:105310002880000CAA0208881109880208AA1C2803
-:105320008C0828160458084C14DDA40AA70224414E
-:10533000162A30802B120407AA28580847B1338B4D
-:1053400013B4559A6004AC28B4662C56277B69E0E8
-:1053500016DDDB9412C050C0D017DD979D15D370B9
-:10536000D4102F60802E60829F169E178816728937
-:105370001A8D128C402A607F0DCC282B3A200CAA63
-:1053800028580835C0B10ABE372E35408F1772F93C
-:105390001A8D128C402A60810DCC282B3A200CAA41
-:1053A0002858082DC0B10ABE372E3542B233B44456
-:1053B000B1556952B6B466C0508F15B877D370B284
-:1053C000FF9F156EF899D10F6C1004C021D10F000A
-:1053D0006C1004270A001CDD761FDD871EDD8A1D88
-:1053E000DD731ADDB51BDDC3C02824B0006D2A753E
-:1053F000AA48288080C09164806100410415DD6E58
-:10540000C03125502E00361A0655010595390C5627
-:10541000110C66082962966E974D0D590A2992243F
-:1054200068900812DDA702420872993B2362951228
-:10543000DD6BCB349F300282020E4402C092993160
-:1054400094329233AD52246295C090244C1024665D
-:105450009524B0002924A0AA42292480B177B14420
-:1054600004044224B400D10FD10FD10F6C10041AE0
-:10547000DD4F2AA00058021C5BFFD5022A02033B25
-:10548000025BFFD11BDD4DC9A12CB102C0D40DCCF4
-:10549000020C0C4F2CB5020CE431D10FC0A00AE471
-:1054A0003118DD430002002F828219DD562EB10231
-:1054B00009FF022F86820EE431D10F006C1004C068
-:1054C0002002E43114DD3D16DD3A00020022628242
-:1054D000234102732F0603E431C020D10F19DD8769
-:1054E0001ADD862841020A2A010988012A668228D3
-:1054F000450208E43115DD7D12DD8225461DD10F00
-:105500006C1004292006289CF96480A02A9CFD6563
-:10551000A0968A288D262F0A087AD9042B221FC824
-:10552000BD2C206464C0812E22090EAE0C66E0788A
-:105530002B200C1EDD1F0CBC11AECC28C28619DD41
-:105540001D78F3026000AD09B90A2992A36890089A
-:105550002E220009EE0C65E09B29C2851FDD276421
-:1055600090929F90C0E41FDD349E9128200AC0E0F5
-:105570009E930F8802989288200F880298942F207B
-:10558000079A979D962F950A2E24072820062920F2
-:105590006468833328C28512DD0E288C20A2B22EC7
-:1055A00024CF28C685C020D10FC020D10F2A206A61
-:1055B0000111020A2A4165AF52DA20C0B05805D164
-:1055C00064AFE5C021D10F00649FC81FDCFB2D2014
-:1055D000168FF209DD0C00F10400DD1AADAD9D2936
-:1055E00012DCFC28C285A2B22E24CF288C2028C62B
-:1055F00085C020D10FC021D10F0000006C100426FF
-:105600000A001BDD4015DCEC28206517DCE9288C3E
-:10561000FE6480940C4D110DBD082CD2F52BD2F4F4
-:105620002ED2F77CB13DB4BB2BD6F47BE9052BD24F
-:10563000F62BD6F47CB92C2AD2F62AD6F52AD6F443
-:1056400006E4310002002872822AFAFF0041042990
-:105650000A012F510200991A0A9903098801287634
-:10566000820FE4312624652BD2F48E5A2CD2F5B069
-:10567000EE9E5A7BCB1629D2F62FD2F70CB80C0926
-:10568000FF0C08FF0C0F2F14C8F96000320BCA0C76
-:105690000A2A14CEA92B5102C0C20CBB020B0B4F1D
-:1056A0002B55020BE431D10F00DB30DA205BFF9485
-:1056B0001BDD1564AF5D0C4D11ADBD63FFA800008F
-:1056C00006E4310002002F728218DCD42E51020849
-:1056D000FF022F76820EE431D10F00006C1004C05F
-:1056E0003003E43116DCB315DCB40002002462821E
-:1056F00074472118DD05875A084801286682CD7352
-:1057000019DD030C2A11AA9922928329928472919D
-:10571000038220CC292B51020BE431C020D10F0091
-:105720001FDCFC2E51020FEE012E55020EE431B0AB
-:105730002DB17C9C5A12DCF708DD112D5619D10FC2
-:105740006C10061BDC9A1EDC9C22B0001ADCF36F86
-:1057500023721DDCDAC04818DCF21FDCF0DC10D547
-:10576000C083F000808600508A6D4A4F0F35110DBE
-:1057700034092440800B560A296294B1330E55092E
-:105780002251400F44110C440A874009A80C02889A
-:105790003622514107883608770CA89929669497D4
-:1057A00040296295874109A80C0288360788360887
-:1057B000770CA8992966959741030342B1380808E8
-:1057C0004298F0D10F1CDCD713DCD827B00023326D
-:1057D000B5647057C091C0D016DCD615DCD4C0407B
-:1057E0002AC00003884328C4006D793C004104B1FD
-:1057F0004400971A7780148E502FB2952DB695AF2E
-:10580000EE2EED2006EE369E5060001877A009833C
-:10581000509D5023B69560000223B295223D20068C
-:10582000223622B695B455B8BBD10F000388432861
-:10583000C400D10F6C1004C04004E43115DCBE007C
-:105840000200885013DCBDCB815BFFBD1CDCBC0CAF
-:105850002D11ADCC2BC2822AC28394507BAB142E67
-:10586000C28429C2850ABD0C0E990C0D990C092918
-:10587000146000050BA90C092914993015DC4F2A76
-:1058800051020AE4312A2CFC58004B2B32000AA2A8
-:10589000022BBCFF9B30CCB6C8A4D2A0D10F000015
-:1058A00004E4311EDC430002002DE2822FBAFF2CFB
-:1058B00051020FDD012DE6820CE431D10F00000012
-:1058C0006C1004D10F0000006C1004C020D10F0038
-:1058D0006C100413DC9BC0D103230923318DC0A0BD
-:1058E0006F340260008D19DC321BDC3317DC940C42
-:1058F0002811A8772672832572822CFAFF765147E9
-:1059000088502E7285255C0425768275E9052572FE
-:10591000842576827659292E72842E76822E76837D
-:105920000AE4310002002392820021042FB1020018
-:10593000D61A0C66030633012396820FE4312672D1
-:105940008325728260000200D8A07659220AE431D1
-:1059500000020023928200210400D21A2FB1020C0F
-:1059600022030232012296820FE431D280D10F004D
-:10597000D280D10FC020D10F6C1004DB30862015EF
-:10598000DC0B280A00282502DA2028B0002CB007FA
-:1059900005880A28824C2D0A010B8000DBA065AF28
-:1059A000E61ADC040A4A0A29A2A3C7BF769101D1EC
-:1059B0000F2BA6A3D10F00006C1004C0D1C7CF1BC2
-:1059C000DBFE19DBFB17DBF90C2811A87786758540
-:1059D00074C0A076516288508E77B455957475E97D
-:1059E00003857695747659278F769F759F740AE4A0
-:1059F00031000200239282B42E2FB10200E1040094
-:105A0000D61A0C66030633012396820FE43186759D
-:105A100083747639280AE4310002002E9282B4227F
-:105A200000210424B10200DF1A0CFF030FEE012E47
-:105A3000968204E431D280D10FD8A07651D6D2809C
-:105A4000D10F00006C1004290A801EDC001FDC004E
-:105A50001CDBD80C2B11ACBB2C2CFC2DB2850FCC35
-:105A6000029ED19CD0C051C07013DBFC14DBFB182C
-:105A7000DBF92AB285A82804240A234691A986B80E
-:105A8000AA2AB685A98827849F25649FD10F000084
-:105A90006C100419DC2C0C2A11A9A98990C48479F2
-:105AA0008B761BDC1AABAC2AC2832CC2847AC16809
-:105AB0008AA02BBC30D3A064A05E0B2B0A2CB2A30F
-:105AC00019DBE568C0071DDC20D30F7DC94AA92971
-:105AD000299D0129901F68913270A603D3A0CA9E08
-:105AE000689210C7AF2AB6A32A2CFC5BFFB3D23052
-:105AF000D10F000013DBC503A3018C311DDBB60CF5
-:105B00008C140DCC012CB6A363FFDC00C020D10F98
-:105B1000DA205BFFCCC020D10FC020D10F000000E5
-:105B20006C1004DB30C0D019DBA1DA202830002251
-:105B3000300708481209880A28824CDC200B8000B4
-:105B40001BDB9C0C4A11ABAA29A28409290B29A6AC
-:105B500084D10F006C1004C04118DB9517DB970C43
-:105B60002611A727277030A866256286007104A336
-:105B70005500441A75414822628415DBB802320B85
-:105B8000C922882117DB940884140744017549054C
-:105B9000C834C020D10FD10F0809471DDBEBC0B2BC
-:105BA0008E201FDB820E0E43AFEC2BC4A00FEE0A3B
-:105BB0002DE6242A6284C0200A990B296684D10F1D
-:105BC000C020D10F6C1004DB30C0D018DB78DA2095
-:105BD00025300022300708580A28824CDC200B8030
-:105BE000008931709E121BDB720C4A11ABAA29A2EC
-:105BF0008409290B29A684D10F09C95268532600AC
-:105C0000910418DB6DC0A12F811200AA1A0AFF02AD
-:105C10002F85121EDB670C4D11AEDD2CD2840C2CAF
-:105C20000B2CD684D10FC0811FDB64B89A0A0A47B7
-:105C30002EF11200A10400881A08EE022EF5121DA2
-:105C4000DB5C0C4C11ADCC2BC2840B2B0B2BC68414
-:105C5000D10F00006C1004DB30C0D019DB54DA2007
-:105C600028300022300709880A28824CDC200B806B
-:105C7000001CDB4F0C4B11ACBB2AB2840A2A0B2A46
-:105C8000B684D10F6C1004C04118DB4916DB4B0CF5
-:105C90002711A626266030A872252286006104A35B
-:105CA0005500441A75410822228402320BD10F009C
-:105CB000C020D10F6C100415DBA502491429561120
-:105CC0002452120208430F8811C073008104003669
-:105CD0001A008104C78F00771A087703074401066A
-:105CE0004402245612D10F006C10066E230260008D
-:105CF000AC6420A7C0A0851013DB7E16DB94C040E7
-:105D0000A6AA2BA2AE0B194164906668915D6892B9
-:105D10005268933C2AA2AA283C7F288C7F0A0A4D0D
-:105D20002980012880002AACF208881109880275B0
-:105D300089462B3D0129B0002BB0010899110B9920
-:105D4000027A9934B8332A2A00B1447249B160000A
-:105D50004A7FBF0715DB7F63FFB90000253AE86380
-:105D6000FFB10000253AE863FFA90000250A64633B
-:105D7000FFA1C05A63FF9C0000705F082534FF0537
-:105D80008C142C34FE70AF0B0A8D142E3D012AE4C6
-:105D9000012DE400DA405BFD5063FFA7D10FD10F66
-:105DA0006C10041ADB0519DB021CDB6A1BDB6BC001
-:105DB00080C07160000D00000022A430B1AA299CAF
-:105DC000107B915F26928679C2156E6262C0206D4B
-:105DD000080AB12200210400741A764BDB63FFEE3F
-:105DE0002292850D6311032514645FCFD650032DD5
-:105DF000436DD9039820B4220644146D492298209B
-:105E000098219822982398249825982698279828AE
-:105E10009829982A982B982C982D982E982F222CD8
-:105E20004063FF971EDAE327E68027E681D10F0063
-:105E3000C02063FF830000006C1004C062C04112E8
-:105E4000DADE1ADADA13DB452AA00023322D19DB59
-:105E50003F2BACFE2992AE6EA30260008E090E406D
-:105E60002D1AC2C2CD0EDC392C251664B0895BFF19
-:105E70009E15DB3B1ADAE52B3AE80A3A015805761B
-:105E80002B21160ABB28D3A02B560058058D8B500A
-:105E90000ABB082A0A0058058C15DB322D21022C7A
-:105EA0003AE80C3C2804DD022D25029C505805845C
-:105EB0008B50AABBC0A15805841CDB2B2D21020CE2
-:105EC0003C2806DD0213DB292D25029C3058057C79
-:105ED0008B30AABBC0A258057C2A2102C0B40BAAF1
-:105EE000020A0A4F2A2502580590D10F242423C301
-:105EF000CC2C251663FF760018DB211CDB1D19DB7B
-:105F00001E1BDB1C17DAF085202E0AFD1FDB1D2D62
-:105F1000202E24F47A24F47E24F4820EDD0124F46D
-:105F2000862E0AF707552806DD02C0750EDD01052D
-:105F30000506AB5BA959C0E8AC5C24C4AB0EDD021E
-:105F400027C4AC2E0ADFA85527B4EC0EDD0124B41B
-:105F5000EBC2E027942C0EDD0224942B2E0A800D38
-:105F60000D4627546C24546B0EDD022D242E63FE47
-:105F7000FC0000006C10042A0A302B0A035BFF4D62
-:105F800012DAF3C390292616C3A1C0B3C08A28260B
-:105F9000175BFF48C03CC3B12B26161ADA872AA02C
-:105FA0002023261764A079C3A2C0B15BFF42C3A21D
-:105FB000C0B15BFF40C3C22C2616C2AFC0B12326BE
-:105FC000175BFF3CC28F282616C0FE2F2617C2E2A1
-:105FD0002E26162A0AA1C0B1C0D82D26175BFF3580
-:105FE0002A0AA12A2616C3A6C0B3C1922926175B86
-:105FF000FF31C3C62C2616C1B32A0AA22B2617C00E
-:10600000B35BFF2C290AA2292616C185282617C2B0
-:10601000FB2F2616C0E72E26171DDADA2D2610D103
-:106020000FC3A2C0B35BFF2363FF82006C10041C8C
-:10603000DAA41BDA9118DAD417DAD516DAD515DA1C
-:10604000D5C0E0C0D414DAA01FDA5CC0288FF06D90
-:106050002A36DAC0D9C07C5B020FC90C1CDA9A0C54
-:106060009C28A8C3A6C22A36802A2584A4C2A7CC0D
-:106070002D248C2B248A2B24872E248BB1BB2E36E7
-:106080009F2C369E2C369DB1AC1CDA7B1BDAC3C02C
-:10609000286D2A33DAC0D9C07C5B020FC90C1CDA28
-:1060A000890C9C28A8C3A6C22A36802B2584A4C2AA
-:1060B000B1BBA7CC2D248C2E248B2A248A2E369F6C
-:1060C0002C369E2C369DB1ACC07919DA791BDAB525
-:1060D00013DAB31ADAB318DAB414DA7A16DAB404C3
-:1060E000F42812DAB304660C040506A252A858AAD2
-:1060F0005AA3539B3029A50027848AC091C0A52AA2
-:10610000848C29848B17DAAC18DAABA75726361D96
-:1061100026361E2E361F16DAA913DAA9A655043321
-:106120000C2826C82E75002D54AC2E54AB2E54AA24
-:106130002326E62326E52E26E7D10F006C10061352
-:10614000DA8717DA8224723D2232937F2F0B6D0893
-:10615000052832937F8F0263FFF3C0C4C0B01ADA00
-:1061600016C051D94004593929A4206E44020BB5F8
-:1061700002C3281EDA11DDB025E422052D392DE4F5
-:1061800021C0501EDA9019DA8018DA8016DA821DE2
-:10619000DA8E94102A724517DA4C6DA94BD450B39D
-:1061A000557A5B17DF50756B071FDA038FF00F5FAF
-:1061B0000C12DA4402F228AE2222D681D54013DA3C
-:1061C00041746B0715D9FD855005450C035328B163
-:1061D00045A73FA832A93322369D22369E24368019
-:1061E0002B369F2BF48B2CF48C14DA5C24424DC09C
-:1061F00030041414C84C6D0806B133041414C8429A
-:1062000063FFF20015D9EAC4400031041AD9EBC08B
-:10621000D193A200DD1AC138B0DD9DA318DA502B4E
-:10622000824D29824E29A51C2882537A871E2C5420
-:10623000008E106FE45D12D9E02F211D23211C2F49
-:10624000251B04330C23251C23251AD10FC06218EB
-:10625000DA3F88807E87D989102654006F94191BF5
-:10626000D9D62AB11C0A1A1404AA0C2AB51C2AB5BC
-:106270001D2AB51A2AB51BD10F1BD9CF2AB11C0A6A
-:106280001A1403AA0C2AB51C2AB51D2AB51A2AB558
-:106290001BD10F001CD9C92BC11D2DC11C2BC51B27
-:1062A00003DD0C2DC51C2DC51AD10F006C1006196D
-:1062B000D9C214DA2612DA2915DA44C73FC0E02E13
-:1062C00056A82E56A92E56AA2E56AB23262918D9E3
-:1062D000EADB101CDA3EC0D42A42452D16019C1080
-:1062E00000B0890A880C2896005BFF942B22E318E3
-:1062F000D9B20B5B149B842A22E48B84B1AA0A5A7C
-:10630000140BAA0C9A852922E509591499862F2283
-:10631000CD0F5F149F875BFF455BFF1623463BC194
-:10632000B01DD9A51CDA032AD1022C463A0BAA02C9
-:106330000A0A4F2AD50258047C5BFEBF5BFE98C058
-:1063400050C0B016D99B14D9A317DA12C0C0C73EEB
-:1063500093122C262DC0306000430000007F9F0F59
-:10636000B155091914659FF4C0500AA9027FA7EF1F
-:1063700018D98FDA5008580A28822C2B0A000B8073
-:1063800000005104D2A0C091C7AF00991A0A990326
-:106390009912CE33642067D3202B200795138C12DB
-:1063A0002A62827CA85F18D98108580A28822CDAD0
-:1063B000500B8000D2A0643FDA8A310A8A1404AA02
-:1063C00001C8298B210B8B1404BB017BA945DDA0DF
-:1063D0007A7B081DD9792DD2000DAD0CDB3019D98F
-:1063E000731AD9B82812030ADA28088C021DD9F5C5
-:1063F00009880A28823C0DAA080B8000652F97D3D4
-:1064000020C0B063FF97CB53B1550050040A09195F
-:1064100063FF4900DAB07B7B071AD9678AA00ABA02
-:106420000C1BD9A88C310BAB280C8A141CD9E6ACF8
-:10643000BB1CD9E504AA012BC68163FF907FA7C7C7
-:1064400063FF62006C100427221EC08008E4311B29
-:10645000D9580002002AB28219D958003104C0610B
-:1064600000661A2991020A6A022AB68209E43115E5
-:10647000D9B30C3811A8532832822432842A8CFCD8
-:106480007841102921022A368297A009690229251C
-:1064900002D10F002B21022C32850B6B022CCCFC7D
-:1064A0002C368297C02B2502D10F00006C1004C03F
-:1064B000E71DD93B1CD93D0D4911D7208B228A20DD
-:1064C0000B4B0BD2A007A80C9B72288CF4C8346F1E
-:1064D0008E026000A21FD933A298AF7B78B334C973
-:1064E0003DC081C0F0028F380F0F42C9FA2CD67E12
-:1064F000D5206D4A0500308800508C8870089808B7
-:1065000078B16CD2A09870D10FC0F0038F387FE0C3
-:10651000DE63FFD8027B0CAFBB0B990C643046D80E
-:1065200030C0F1C05002F5380505426450792CD6D0
-:106530007E0B36122F6C100F4F366DFA05008088D7
-:1065400000208C06440CC081250A0003B208237C7D
-:106550000C0385380505426450592CD67E6D4A05DA
-:1065600000208800308CD2A0A798BC889870D10FEA
-:10657000D2A0BC799970D10FD2302BAD08C0F1C038
-:10658000500BF538050542CB552CD67E083F14C17B
-:10659000600F660C064636D30F6D6A050020880032
-:1065A000B08C827063FF2D00C05003F53875E08019
-:1065B00063FF7A00C06002863876E0A063FF9A002D
-:1065C000C05003F53875E0C363FFBD006C1004D6FE
-:1065D0002068520F695324DA20DB30DC405800F089
-:1065E000D2A0D10FDA20DB30DC405800ED9A242411
-:1065F000240EC02122640FC020D10F00B83BB04C44
-:106600002A2C7489242D200E2E200FA4DDB1EE2E0D
-:10661000240FB0DD2D240E2890072D9003A488B000
-:1066200088B1DD2D94032894075BFFA069511DC03C
-:10663000E082242A600F18D9662A240329600E8F6D
-:106640002029240708FF029F209E64D10FC020D17B
-:106650000F0000006C1004942319D95EC0B3083AEF
-:10666000110BAA02992019D8D29A2116D8D0C0505D
-:1066700028929D2564A2288C1828969DD10F000091
-:106680006C1004282066C038232406B788282466A6
-:10669000D10F00006C1006035A0C0D36110D5C1161
-:1066A000D8208B2282210CBB0C06550F9B82023214
-:1066B0000B928113D8BCD920A38F6450531CD8B837
-:1066C000C0D71BD8B9A256C0E1290A0004E938098D
-:1066D000094276F34A044302C99E2BC67E6DAA0581
-:1066E00000208800308C8981A95909FA0C64A079AE
-:1066F00099818A82C8ADD290D10FC06002E6387607
-:10670000D0DA63FFD4C020BC89998199809282D16C
-:106710000F7F2304292DF8998165BFD963FFE50018
-:10672000028F0CA3FF0F3312931003AA0CD340CB9C
-:106730009E2BC67E86106D6A0500208800308CBCBA
-:1067400082290A0004F308240A010349380909428E
-:10675000CA982BC67E6DAA0500208800308C0F5980
-:106760000CA989BC99998163FF87BC89998163FFD2
-:1067700080C06002E63876D0BA63FFB4C0700247CA
-:106780003877D0D063FFCA006C100414D895C1527A
-:10679000A424CA3028221D73811B292102CD952AE9
-:1067A000300075A912DA20033B022C30072D0A02B3
-:1067B0005801C2653FDDD10F2B300703BB0BDAB0A8
-:1067C00074B3022ABDF8D3A063FFC6006C1004297D
-:1067D0002006C0706E9741292102C08F2A2014C064
-:1067E000B62B240606AA022A241479800227250241
-:1067F0002A221E2C221D7AC10EC8ABDA20DB302CD7
-:106800000A00033D025BF8146450752D21020D0D42
-:106810004CC9D3C020D10F00002E9CFB64E0822F16
-:1068200021020F0F4C65F0911AD8621CD86029A282
-:106830009EC08A798B5D2BC22668B0048D207BD9DF
-:106840005229A29DC0F364904A97901DD8732E21BF
-:10685000049D9608EE110FEE029E979E9118D86F38
-:10686000C0E527C4A22E24062BA29D2F21022BBCFB
-:106870003008FF022F25022BA69DC020D10F00005B
-:10688000002F300068F938DA20DB30DC4058004453
-:1068900063FF7700022A022B0A065800D3220A005F
-:1068A000D10F655010283000688924022A02033B6A
-:1068B00002DC4058003BC020D10FD270D10F000045
-:1068C0002A2C74033B02044C025BFEF863FF3B007E
-:1068D000DB30DC402A2C745BFEF5C020D10F0000B9
-:1068E0006C1004C83F89268829A399992609880C29
-:1068F000080848282525CC52C020D10FDB402A2C7F
-:10690000745BF93DD2A0D10F6C1004D820D730822F
-:10691000220D451105220C928264207407420B134C
-:10692000D821D420A383732302242DF885807451A9
-:106930004CBC82C0906D081600408800708C77397E
-:1069400003D720C0918680743901D420746102631A
-:10695000FFE2CA98C097C0411BD8A0C0A00B8B0C07
-:106960000B4A380A0A42C9AA1DD80E1CD80F2CD6C9
-:106970007EC140D30F6D4A0500208800308C97807F
-:10698000D270D10FBC8FC0E00F4E387E90E263FF13
-:10699000D6BC8292819280C0209282D10F000000EA
-:1069A0006C1006C0D71CD7FE1BD8000D4911D7208C
-:1069B0002E221F28221D0E4E0BD280078A0C2E7607
-:1069C0001F2AAC80C8346FAE026000CB2F0A801A39
-:1069D000D804A29EAA7A7EA33FC93FC0E1C050025C
-:1069E000E538050542CA552BC67EDB20D30F6D4A1C
-:1069F0000500308800B08C2E721DAE9E0EA50C6472
-:106A00005086D2802E761DC091298403D10FC050AC
-:106A100003E53875D0D363FFCD15D7F1027E0CA501
-:106A2000EE643051C0A1250A0002A538033A0205E0
-:106A300005426450922BC67E0E35129510255C10CF
-:106A4000054536D30F6D5A0500A08800208CC0A1E3
-:106A5000A3E2C05023FA8003730C03A538AF73057B
-:106A600005426450722BC67E851005450C6D5A0593
-:106A700000208800308CD280C0A10E9B0CAB7BAF75
-:106A8000BB2B761D2A8403D10FD280C0C1AF7D2DD0
-:106A9000761D2C8403D10F00D2302E8D08C0F1C09A
-:106AA000500EF538050542CB592BC67E0A3F14C15E
-:106AB000600F660C064636D30F6D6A05002088000D
-:106AC000E08C22721D63FF03C061C05003653875FE
-:106AD000D80263FF6263FF5CC05002A53875D0879F
-:106AE00063FF8100C06003F63876D0BF63FFB90052
-:106AF0006C10042A201529201614D7AF0A990CCB44
-:106B00009D2E200B04ED092BD11C8F2809BC36AC1F
-:106B1000AA0CBB0C2BD51C0A0A472A2415CAAF8B1A
-:106B2000438942B0A800910400881AA8FF0FBB0255
-:106B30009B278F260FB80C783B1AC020D10F00007E
-:106B4000292102C0A20A9902292502C021D10F00E1
-:106B50008B2763FFDC2BD11C0CAA0C0A0A472A24C2
-:106B600015ACBB2BD51CC9AE8B438C288F42B0AD66
-:106B700000F10400DD1AADCC0CBB029B27DA20B774
-:106B8000EB580019C021D10F9F2763FFEF000000D1
-:106B90006C100428203C64304705306000073E013B
-:106BA000053EB156076539054928C77FA933030655
-:106BB00041076603B166060641A6337E871E222181
-:106BC00025291AFC732B1502380C09816000063E3A
-:106BD00001023EB12406423903220AD10FD230D13C
-:106BE0000FC05163FFC000006C100427221EC0803C
-:106BF00008E4311DD76F0002002CD2821BD76F0032
-:106C00003104C06100661A2BB1020C6C022CD682D2
-:106C10000BE43119D7F20C3A11AA932832829780EB
-:106C2000253282243284B45525368275410A2921C1
-:106C300002096902292502D10F2A21022B32830A77
-:106C40006A022B36822A2502D10F00006C1004192B
-:106C5000D76327221EC08009770208E4311DD7546C
-:106C60000002002CD2821BD754003104C0610066A0
-:106C70001A2BB1020C6C022CD6820BE43119D7D737
-:106C80000C3A11AA932832829780253282243284CA
-:106C9000B45525368275410B2A21020A6A022A253B
-:106CA00002D10F002B21022C32830B6B022C368277
-:106CB0002B2502D10F0000006C10041BD73D0C2ABD
-:106CC00011ABAA29A286B438798B221BD73A19D7DF
-:106CD000610B2B0A2BB2A309290868B00274B90D05
-:106CE000299D0129901F6E920822A285D10FC020F4
-:106CF000D10FC892C020D10FDA205BEF35C020D170
-:106D00000F0000006C100414D72A28429E19D727C0
-:106D10006F88026000BA2992266890078A2009AA23
-:106D20000C65A0AC2A429DC0DC64A0A42B200C19E9
-:106D3000D7210CBC11A4CC2EC28609B90A7ED3027D
-:106D400060009A2992A36890078D2009DD0C65D018
-:106D50008C25C2856450862D2104C0306ED80D2C40
-:106D60002066B8CC0C0C472C246665C07B1CD79CD5
-:106D700018D7281AD71E19D72F1DD724C0E49E5123
-:106D80009D508F209357935599539A569A5408FFC4
-:106D9000021AD73A9F5288269F5A9E599D58935E51
-:106DA0009C5D935C9A5B080848058811985FC0D881
-:106DB0001FD7080CB911A499289285AFBF23F4CF2F
-:106DC000288C402896858E262D24069E29C020D109
-:106DD0000FCA33DA20C0B65BFF84C72FD10FC93A80
-:106DE000DA205BFF81C72FD10FDBD05BFE1A232493
-:106DF000662B200C63FF7500C72FD10FC72FD10F53
-:106E00006C1004C85B29200668941C689607C02093
-:106E1000D10FC020D10FDA20DB30DC40DD502E0A4C
-:106E2000005BFE6AD2A0D10F2E200C18D6E10CEF29
-:106E300011A8FF29F286C088798B751AD6DE0AEA76
-:106E40000A2AA2A368A0048B207AB96423F285647D
-:106E5000305E1CD6E82A0A802D2068292067282168
-:106E6000040B991104881109880208DD02C09428D6
-:106E70004A1008DD0218D6E0993198308B2B9A37EA
-:106E80009D340CBB029B32C0C09C359C362A2C74AE
-:106E9000DB40C0D318D6CF29F285A8EE299C202C40
-:106EA000E4CF29F6852D2406DD405BFDFAD2A0D182
-:106EB0000FDA20DBE05BFF4CC020D10F6C100AD64C
-:106EC000302A2006941128ACF86583872B2122C034
-:106ED000F22A21246550082AAC010A0A4F2A2524E7
-:106EE0007ABB0260037F2C21020C0C4C65C3192E67
-:106EF00022158D32C0910EDD0C65D39088381ED6D8
-:106F0000AC64836B8C37C0B8C0960CB9399914B493
-:106F10009A9A120D991199138F6718D6A7C9FB2851
-:106F200080217F83168B142C22002A200C5BFF62A9
-:106F3000D4A064A3A88F6760002800002B200C89D0
-:106F4000120CBA11AEAA2CA2861DD69A7C9B3E0DBD
-:106F5000BD0A2DD2A368D00488207D893024A28563
-:106F600064436427212E07F73607F90C6F9D01D77C
-:106F7000F0DA20DB70C1C42D211F5BFF0589268854
-:106F800027DDA009880C7A8B179A10600006C04094
-:106F900063FFCC0000DA208B105BFED58D1065A25C
-:106FA00067C0E09E488C649C498B658A669B4A9AC0
-:106FB0004B97458F677F7302600120CD529D10DA99
-:106FC00020DB302C12015BFE768D10C051D6A08FD5
-:106FD000A7C0C08A68974D9A4C8869896A984E996B
-:106FE0004F8E6A8A69AE7E77EB01B1AA9E6A9A6972
-:106FF0008B60C0A00B8E1477B701C0A1C091C08474
-:1070000093159D179516C0D025203CC03008580117
-:10701000089338C082083310085B010535400B9D8A
-:107020003807DD100BAB100E19402A211F079910ED
-:1070300003DD020DBB020553100933020A55112965
-:1070400021250A2A140929140499110A99020933DD
-:10705000028A2B2921040BAA021BD6E208991109E6
-:1070600055020855020BAA029A40892088140899F3
-:107070001109880219D6631DD6DC09880298418B54
-:107080002A9346954783150DBB0285168D179B44A1
-:107090008A658966AACAA97C77CB01B1AA07FB0CCD
-:1070A0009C669A6588268E29AD87972607EE0C0E7A
-:1070B0000E482E25259B672B200C87131ED63D0CD2
-:1070C000B911AE99289285A78828968517D641C010
-:1070D00090A7BB29B4CF871863FE3C008C60C0E04A
-:1070E000C091C0F0C034C0B82A210428203C08AAAE
-:1070F000110B8B01038301039F380B9B39C03208AE
-:10710000FF10038801089E380C881407EE100FEE5C
-:107110000203880108983905BF1029211F0ABB11F5
-:1071200007881008FF020BAA0218D6350929140394
-:10713000AA022B212583200B2B1404BB1108331129
-:107140000FBB020B99028B148F2A0B3302083302F8
-:107150008B2B6470868868974D984C8769886A93F2
-:10716000419946974E984FC07077C701C0719A47B2
-:1071700018D69E0B7C100CEC0208F802984418D626
-:107180009B0CBC0208CC029C402A200C295CFEC04F
-:10719000801FD6071CD60F0CAE112B2124ACAAAF32
-:1071A000EEB0BB8F132CE28528A4CFAFCC2CE685A4
-:1071B0002A22152B2524B1AA2A26156490DBC9D2D0
-:1071C0008F262E22090DFF082F26060FEE0C0E0E1D
-:1071D000482E25256550E4C020D10F00C070934192
-:1071E0009F4499469A4777C70A1CD5F32CC022C002
-:1071F000810C87381CD67F0B781008E80208B8028B
-:107200000C8802984063FF8000CC57DA20DB608C4A
-:10721000115BFDE3292102689806689403C020D120
-:107220000F2B221EC0A029221D2A25027B9901C0F6
-:10723000B064BFE813D5DE2CB00728B000DA200315
-:10724000880A28824CC0D10B8000DBA065AFE763C1
-:10725000FFCA000068A779DA20DB30DC40DD505B34
-:10726000FEE8D2A0D10FC16DC19D29252C6000047C
-:1072700029252CD6902624672F2468DA20DB308C31
-:1072800011DD502E0A805BFD51D2A0D10FC168C123
-:10729000A82A252C63FFDD000000C8DF8C268B297F
-:1072A000ADCC9C260CBB0C0B0B482B25252A2C7433
-:1072B000DB602C12015BFD94D2A0D10F2A2C748BC1
-:1072C000115BF6CDD2A0D10FDA205BFE4763FF3809
-:1072D00000DA20C0B15BFE8B65AF2D63FBEDDA20D9
-:1072E0002B200C5BFE5A63FF1F00000012D6428267
-:1072F00020028257C82163FFFC12D63E03E8300407
-:10730000EE3005B13093209421952263FFFC0000FC
-:1073100010D63A910092019302940311D611821073
-:1073200001EA30A21101F031C04004E4160002006D
-:1073300011D6338210234A00032202921011D5FD88
-:10734000C021921004E43184038302820181000091
-:10735000D23001230000000010D62A910092019340
-:1073600002940311D600821001EA30A21101F1311A
-:10737000C04004E41600020011D621821013D5A7E4
-:10738000032202921004E43184038302820181000B
-:1073900000D330013300000010D61B91008101653D
-:1073A000104981026510448103CF1F92019302941A
-:1073B0000311D5EE821001EA30A21101F231C04072
-:1073C00004E41600020011D60D821013D58E03229C
-:1073D00002921004E431840383028201C0109103FD
-:1073E00091029101810000D43001430012D5BDC04B
-:1073F0003028374028374428374828374C233D0168
-:107400007233ED03020063FFFC00000010D5FF9112
-:107410000092019302940311D5FD8210921011D5B0
-:10742000AF8310032202921011D5FA12D5C1921027
-:10743000C04004E41600020011D5F1821013D5A853
-:10744000032202921004E43184038302820181004A
-:1074500000D53001530000006C10026E322FD62090
-:10746000056F04043F04745B2A05440C00410400CA
-:10747000331A220A006D490D73630403660CB122AE
-:107480000F2211031314736302222C01D10FC83B86
-:10749000D10F000073630CC021D10F000000000069
-:1074A00044495630C020D10F6C10020040046B4C90
-:1074B00007032318020219D10F020319C020D10FAC
-:1074C0006C100202EA30D10F6C1002CC2503F031AF
-:1074D00060000F006F220503F1316000056F230586
-:1074E00003F231000200D10F6C1002CC2502F03003
-:1074F000D10F00006F220402F130D10F6F2304027C
-:10750000F230D10FC020D10F6C1002220A20230AC2
-:10751000006D280E28374028374428374828374C34
-:10752000233D01030200D10F6C100202E431D10FA0
-:107530000A0000004368656C73696F204657204459
-:10754000454255473D3020284275696C7420576587
-:1075500064204F63742020382031353A35303A3575
-:1075600030205044542032303038206F6E20636C0D
-:10757000656F70617472613A2F686F6D652F666513
-:107580006C69782F772F66775F372E30292C20563D
-:10759000657273696F6E2054337878203030372EDF
-:1075A00030312E3030202D203130303730313030F6
-:0875B000100701006F4EF8BB4B
-:00000001FF
diff --git a/firmware/cxgb3/t3fw-7.4.0.bin.ihex b/firmware/cxgb3/t3fw-7.4.0.bin.ihex
new file mode 100644
index 00000000000..38dda94bfa6
--- /dev/null
+++ b/firmware/cxgb3/t3fw-7.4.0.bin.ihex
@@ -0,0 +1,1917 @@
+:1000000060007400200380002003700000001000D6
+:1000100000002000E100028400070000E1000288E7
+:1000200000010000E0000000E00000A0010000006E
+:1000300044444440E3000183200200002001E0002A
+:100040002001FF101FFFD0001FFFC000E300043C91
+:100050000200000020006B741FFFC29020006BBCE8
+:100060001FFFC29420006BFC1FFFC29820006C7021
+:100070001FFFC29C200003C0C00000E43100EA3131
+:1000800000A13100A03103020002ED306E2A05000C
+:10009000ED3100020002160012FFDBC03014FFDA5F
+:1000A000D30FD30FD30F03431F244C107249F0D347
+:1000B0000FD30FD30F12FFD5230A00240A00D30F4A
+:1000C000D30FD30F03431F244C107249F0D30FD327
+:1000D0000FD30F14FFCE03421F14FFCB03421F1296
+:1000E000FFCCC0302D37302D37342D37382D373CED
+:1000F000233D017233ED00020012FFC4C0302F37E0
+:10010000002F37102F37202F3730233D017233ED6A
+:1001100000020012FFBEC0302737002737102737F4
+:1001200020273730233D017233ED03020012FFB95F
+:1001300013FFBA0C0200932012FFB913FFB90C028F
+:1001400000932012FFB8C0319320822012FFB71312
+:10015000FFB7932012FFB715FFB316FFB6C030D715
+:100160002005660160001B00000000000000000088
+:10017000043605000200D30FD30F05330C6E3B1479
+:100180000747140704437631E604360505330C6F40
+:100190003BED00020012FFA615FFA3230A00D720A3
+:1001A000070443043E0505330C0747146F3BF00377
+:1001B000020012FFA1C03014FFA1D30FD30FD30F41
+:1001C0009340B4447249F2D30FD30FD30F14FF9B63
+:1001D000834014FF9B834012FF9B230A0014FF9A65
+:1001E000D30FD30FD30F9340B4447249F2D30FD33C
+:1001F0000FD30F14FF95834012FF95C92F832084DE
+:10020000218522BC22743B0F8650B4559630B433FE
+:100210007433F463FFE60000653FE1655FDE12FFC3
+:100220007C230A0028374028374428374828374C91
+:10023000233D017233ED03020000020012FF7AC079
+:1002400032032E0503020012FF7813FF819320C0B2
+:1002500011014931004831010200C00014FF7E0441
+:10026000D23115FF7D945014FF7D04D33115FF7CEE
+:10027000945014FF7C04D43115FF7C24560014FFE5
+:100280007B04D53115FF7B24560010FF7A03000054
+:10029000000000000000000000000000000000005E
+:1002A000000000000000000000000000000000004E
+:1002B000000000000000000000000000000000003E
+:1002C000000000000000000000000000000000002E
+:1002D000000000000000000000000000000000001E
+:1002E000000000000000000000000000000000000E
+:1002F00000000000000000000000000000000000FE
+:1003000000000000000000000000000000000000ED
+:1003100000000000000000000000000000000000DD
+:1003200000000000000000000000000000000000CD
+:1003300000000000000000000000000000000000BD
+:1003400000000000000000000000000000000000AD
+:10035000000000000000000000000000000000009D
+:10036000000000000000000000000000000000008D
+:10037000000000000000000000000000000000007D
+:10038000000000000000000000000000000000006D
+:10039000000000000000000000000000000000005D
+:1003A000000000000000000000000000000000004D
+:1003B000000000000000000000000000000000003D
+:1003C000000000000000000000000000000000002D
+:1003D000000000000000000000000000000000001D
+:1003E000000000000000000000000000000000000D
+:1003F00000000000000000000000000000000000FD
+:1004000000000000000000000000000000000000EC
+:1004100000000000000000000000000000000000DC
+:1004200063FFFC000000000000000000000000006E
+:100430000000000000000000000000001FFC0000A1
+:100440001FFC0000E30005C81FFC00001FFC0000AB
+:10045000E30005C81FFC00001FFC0000E30005C806
+:100460001FFFC0001FFFC000E30005C81FFFC00042
+:100470001FFFC018E30005C81FFFC0181FFFC018EA
+:10048000E30005E01FFFC0181FFFC290E30005E076
+:100490001FFFC2901FFFC290E30008581FFFC290C9
+:1004A0001FFFC58CE3000858200000002000016AEF
+:1004B000E3000B542000018020000180E3000CC009
+:1004C0002000020020000203E3000CC02000021CF8
+:1004D00020000220E3000CC420000220200002269D
+:1004E000E3000CC82000023C20000240E3000CD0D6
+:1004F0002000024020000249E3000CD42000024CFE
+:1005000020000250E3000CE02000025020000259BD
+:10051000E3000CE42000025C20000260E3000CF029
+:100520002000026020000269E3000CF42000026C4D
+:1005300020000270E3000D0020000270200002790C
+:10054000E3000D042000028C2000028CE3000D105B
+:100550002000029020000293E3000D10200002AC66
+:10056000200002B0E3000D14200002D0200002F2AF
+:10057000E3000D18200003B0200003B0E3000D3CA1
+:10058000200003B0200003B0E3000D3C200003B0C6
+:10059000200003B0E3000D3C200003B0200003B0B6
+:1005A000E3000D3C200003B020006D94E3000D3CFF
+:1005B00020006D9420006D94E3007720000000007F
+:1005C00000000000000000001FFC00001FFC0000F5
+:1005D0001FFFC5901FFFC67020006D9820006D980A
+:1005E000DEFFFE000000080CDEADBEEF1FFFC2A064
+:1005F0001FFCFE001FFFC0941FFFC5C0300000009D
+:10060000003FFFFF8040000010000000080FFFFFC8
+:100610001FFFC26D000FFFFF804FFFFF8000000033
+:1006200000000880B000000560500000600000007D
+:1006300040000011350000004100000010000001E2
+:100640002000000000001000400000000500000035
+:1006500080000019040000000000080010000005E0
+:10066000806000007000000020000009001FF800FA
+:100670008000001EA0000000F800000007FFFFFF40
+:100680000800000018000000010080014200000086
+:100690001FFFC21D1FFFC0DC000100806040000082
+:1006A0001A0000000C0000001000000A00003000DA
+:1006B000600008008000001C000100008000001A9B
+:1006C00080000018FC0000008000000100004000D5
+:1006D000030000008000040050000003FFFFBFFF84
+:1006E0001FFFC3D400000FFFFFFFF000000016D073
+:1006F0000000FFF7A50000001FFFC4B01FFFC4618A
+:100700000001000800000B20202FFF801FFFC455B0
+:1007100000002C00FFFEFFF800FFFFFF1FFFC57861
+:1007200000002000FFFFDFFF0000FFEF01001100CD
+:100730001FFFC3D21FFFC590FFFFEFFF0000FFFBAD
+:100740001FFFC6301FFFBEA0FFFFF7FF1FFFC064E3
+:100750000000FFFD1FFFC6200001FBD01FFFC5B03A
+:100760001FFFC6601FFFC591E0FFFE001FFFC5A071
+:10077000000080001FFFC53C1FFFC5B41FFFC068FD
+:100780001FFFC4D01FFCFFD8000100817FFFFFFFC7
+:10079000E1000600000027101FFCFE301FFCFE7069
+:1007A000E10002001FFFC5381FFFC5500003D090B5
+:1007B0001FFFC5642B5063802B5079802B50908095
+:1007C0002B50A6801FFFC4690100110F202FFE00CF
+:1007D00020300080202FFF000000FFFF0001FFF805
+:1007E0002B50B2002B50B208000100102B50B180EA
+:1007F0002B50B2802B50BA00000100112B50BD28A5
+:100800002B50BC802B50BDA020300000DFFFFE002D
+:100810005000000200C0000002000000FFFFF7F4DB
+:100820001FFFC06C000FF800044000000010000023
+:100830000C4000001C400000E00000A01FFFC5406D
+:100840001FFD00081FFFC5541FFFC5681FFFC57CA3
+:10085000E1000690E10006EC00000000000000004E
+:100860000000000000000000010000000000000087
+:100870000000000000000000201000402010004098
+:100880002010004020140080200C0000200C0000EC
+:10089000200C000020100040201400802014008054
+:1008A00020140080201800C0201C0100201C010022
+:1008B000201C010020200140201800C0201800C08A
+:1008C000201800C0201C0100201800C0201800C003
+:1008D000201800C0201C01002020014020200140E1
+:1008E00020200140202009402020094020200940EC
+:1008F0002020094020240980FFFFFFFFFFFFFFFFAA
+:10090000FFFFFFFF000000000000000000000000EB
+:100910000000000000000000200054902000536000
+:1009200020005490200054902000529C2000529CA3
+:100930002000529C200050DC200050DC200050D4CD
+:100940002000504020004EE820004CC820004A9C67
+:100950000000000000000000200054602000532C24
+:10096000200053D0200053D0200051842000518417
+:10097000200051842000518420005184200050CC5C
+:100980002000518420004E0820004C7820004A4866
+:10099000000000000000000020000BE820003A30BA
+:1009A000200004C02000463C20000BE0200041480D
+:1009B000200003F0200045FC20004A2420003E5483
+:1009C00020003D70200039AC2000383C200035ACC0
+:1009D0002000310C20003BCC20002D6C2000280092
+:1009E000200067182000238C2000206C2000201895
+:1009F00020001D04200018182000154820000E2C8F
+:100A000020000C2C2000110C200012F82000434084
+:100A100020003E0820000BF0200004C00000000071
+:100A200000000000000000000000000000000000C6
+:100A300000000000000000000000000000000000B6
+:100A400000000000000000000000000000000000A6
+:100A50000000000000000000000000000000000096
+:100A60000000000000000000000000000000000086
+:100A70000000000000000000000000000000000076
+:100A80000000000000000000000000000000000066
+:100A900000000000000000000000000032640000C0
+:100AA0000000000032640000640064006400640020
+:100AB00064006400640064000000000000000000A6
+:100AC0000000000000000000000000000000000026
+:100AD0000000000000000000000000000000000016
+:100AE0000000000000000000000000000000000006
+:100AF00000000000000000000000000000000000F6
+:100B000000001000000000000000000000000000D5
+:100B100000000000000000000000100000000000C5
+:100B200000000000000000000000000000432380DF
+:100B300000000000000000000000000000000000B5
+:100B400000000000000000000000000000000000A5
+:100B500000000000005C94015D94025E94035F94C9
+:100B60000043000000000000000000000000000042
+:100B70000000000000000000000000000000000075
+:100B80000000000000000000000000000000000065
+:100B900000000000005C90015D90025E90035F9099
+:100BA00000530000000000000000000000000000F2
+:100BB0000000000000000000000000000000000035
+:100BC0000000000000000000000000000000000025
+:100BD00000000000009C94001D90019D94029E94D2
+:100BE000039F94040894050994060A94070B940043
+:100BF00043000000000000000000000000000000B2
+:100C000000000000000000000000000000000000E4
+:100C100000000000009C90019D90029E90071D9096
+:100C2000039F90047890057990067A90077B900056
+:100C30005300000000000000000000000000000061
+:100C400000000000000000000000000000000000A4
+:100C50000000000000DC94001D9001DD9402DE9491
+:100C600003DF94040494050594060694070794088A
+:100C700008940909940A0A940B0B9400430000009D
+:100C80000000000000000000000000000000000064
+:100C90000000000000DC9001DD9002DE900B1D9052
+:100CA00003DF9004B49005B59006B69007B790089E
+:100CB000B89009B9900ABA900BBB9000530000009D
+:100CC00063FFFC0020006B5010FFFF0A00000000D3
+:100CD00020006B7400D23110FFFE0A0000000000FB
+:100CE00020006BBC00D33110FFFE0A0000000000A2
+:100CF00020006BFC00D43110FFFE0A000000000051
+:100D000020006C7000D53110FFFE0A0000000000CA
+:100D100063FFFC00E00000A012FFF7822002825770
+:100D2000C82163FFFC12FFF303E83004EE3005C076
+:100D30003093209421952263FFFC00001FFFD00018
+:100D4000000400201FFFC5901FFFC670200A00117D
+:100D5000FFFB13FFFB03E63101020016FFFA17FF4A
+:100D6000FAD30F776B069060B4667763F85415B5C5
+:100D7000541A610F140063FFF90000006C1004C0E6
+:100D800020D10F006C1004C0C71AEF06D830BC2B5E
+:100D9000D72085720D4211837105450B9572023380
+:100DA0000C2376017B3B04233D089371A32D12EEA7
+:100DB000FE19EEFEA2767D632C2E0A000882022820
+:100DC0000A01038E380E0E42C8EE29A67E6D4A0532
+:100DD00000208800308C8271D10FC0F0028F387FE4
+:100DE000C0EA63FFE400C0F1C050037E0CA2EE0E27
+:100DF0003D1208820203F538050542CB5729A67E2D
+:100E00002FDC100F4F366DFA0500208800308CBCA7
+:100E100075C03008E208280A01058338030342C977
+:100E20003E29A67E0D480CD30F6D8A050020880050
+:100E3000B08C8271D10FC05008F53875C0C163FF06
+:100E4000BBC06002863876C0DA63FFD46C1012161D
+:100E5000EED8C1F9C1E8C1C72B221E28221DC0D07F
+:100E60007B81312920060BB702299CFA655008289E
+:100E70002072288CFF28247264915C2AB0000CA890
+:100E80000C6481670EA90C6492B37FA13769AC2F03
+:100E90006000340000282006D7D0288CFACC572ACE
+:100EA00020722AACFF2A24726481352AD0000CA952
+:100EB0000C6491640EAC0C64C31B7FA10768AC0783
+:100EC000C020D10F002D25028A32C0900A6E5065D5
+:100ED000E5B5292467090F4765F5B12C200C1FEEF5
+:100EE000B50CCE11AFEE29E286B4487983026005D5
+:100EF0008219EEB109C90A2992A36890078F2009C7
+:100F0000FF0C65F56E2FE28564F56865559628221D
+:100F10001D7B8105D9B060000200C0908B9417EE54
+:100F2000A70B881487740B0B47A87718EEA509BB8D
+:100F30001008770297F018EEA317EEA408A8010B8B
+:100F400088020747021BEEA097F10B880298F22750
+:100F500090232B902204781006BB1007471208BB81
+:100F6000022890210777100C88100788020B88024E
+:100F700017EE988B3307BB0187340B880298F397E1
+:100F80009997F48B9587399BF588968B3898F688D6
+:100F90009797F99BF898F717EE8F28E28507C7080F
+:100FA0002D74CF08480B28E68565550F2B221E2887
+:100FB000221D7B89022B0A0064BF042CB00728B0D5
+:100FC00000DA2006880A28824CC0D10B8000DBA002
+:100FD00065AFE763FEE90000292072659E9C60040E
+:100FE000E72A207265AEC36004DE00002EB0032C39
+:100FF0002067D4E065C1058A328C330AFF500C4566
+:1010000054BC5564F4EB19EE74882A09A9010988C7
+:101010000C64821FC0926000DD2ED0032A2067D4AA
+:10102000E065A0D88A328B330AFC500B4554BC557E
+:1010300064C4BE19EE69882A09A9017989D50BEA29
+:101040005064A4E30CEE11C0F02F16132E16168A6E
+:10105000E78CE82A16128EE9DFC0AAEA7EAB01B15E
+:10106000CF0BA8506583468837DBC0AE89991E78C0
+:101070009B022BCC012B161B29120E2B0A002916C2
+:101080001A7FC3077FC9027EAB01C0B165B49D8BD7
+:10109000352F0A002A0A007AC30564C3CB2F0A0140
+:1010A00065F4892B12162B1619005104C0C100CC0F
+:1010B0001A2CCCFF2C16170CFC132C16182B121AFA
+:1010C0002A121BDC50581974C0D0C0902E5CF42C2E
+:1010D00012172812182F121B2A121A08FF010CAA25
+:1010E000018834074C0AAB8B2812192BC6162F86A1
+:1010F000082A86092E74102924672E70038975B179
+:10110000EA2A7403B09909490C659DB32B20672D19
+:10111000250265B3FA2B221E2C221D7BC901C0B00B
+:1011200064BD9C2CB00728B000DA2006880A28820B
+:101130004CC0D10B8000DBA065AFE763FD8189BAAD
+:10114000B19965909788341CEE2598BA8F331EEEBE
+:101150001E0F4F542FB42C8D2A8A320EDD020CAC98
+:10116000017DC9660A49516F92608A3375A65B2C6E
+:10117000B0130AED510DCD010D0D410C0C417DC98F
+:10118000492EB012B0EE65E3C6C0D08E378CB88A57
+:10119000368FB97CA3077AC9027EFB01C0D1CED9B4
+:1011A00088350AAD020E8E0878EB022DAC0189B7A6
+:1011B000DAC0AF9B79BB01B1CADCB0C0B07DA30778
+:1011C0007AD9027CEB01C0B164B161C09129246776
+:1011D000C020D10F00008ADAB1AA64A0C02C206719
+:1011E0002D250265C3111DEDF88A321EEDFD0DADF2
+:1011F000010EDD0C65D28A0A4E516FE20260028157
+:10120000C090292467090F4765F2F828221D7B89C1
+:10121000022B0A0064BCA82CB00728B000DA200614
+:10122000880A28824CC0D10B8000DBA065AFE76341
+:10123000FC8D00000CE9506492ED0CEF11C0802889
+:101240001611AFBF2F16198EF88BF7DAE08FF92B36
+:101250001610ABFB7FBB01B1EA0CA8506580D688A5
+:1012600037DCE0AF89991C789B022CEC012C161B13
+:1012700029120C2C0A0029161A7AE3077AE9027F50
+:10128000BB01C0C165C2A58B352C0A002A0A007AB1
+:10129000E30564E1CA2C0A0164CE0D60028E883435
+:1012A0001BEDCF98DA8F331EEDC80F4F542FD42C7F
+:1012B0008C2A8A320ECC020BAB010CBB0C65BF0A28
+:1012C0000A49516E920263FF018A330AAB5064BE31
+:1012D000F92CD0130AEE510ECE010E0E410C0C412A
+:1012E0000ECC0C65CEE42FD012B0FF65F26EC0B00C
+:1012F0008E378CD88A362FD2097CA3077AC9027E12
+:10130000FB01C0B165BEC38835DBA0AE8E78EB01B2
+:10131000B1AB89D7DAC0AF9D79DB01B1CAC0C07B60
+:10132000A3077AB9027DEB01C0C165CE9DC09029AB
+:101330002467C020D10F88378C3698140CE90C290B
+:10134000161408F80C981D78FB07281214B088288A
+:101350001614891D9F159B16C0F02B121429161AFE
+:101360002B161B8B147AE30B7AE90688158E1678F8
+:10137000EB01C0F165F1BA29121A2F12118A352E2C
+:10138000121B9A1AAFEE2F1210C0A0AF9F79FB016B
+:10139000B1EE9F11881AC0F098107AE30A7EA90571
+:1013A0002A12017A8B01C0F164F0816001838936D1
+:1013B0008B3799170BE80C981F09C90C291615785B
+:1013C000EB07281215B088281615D9C09A199E184F
+:1013D0008A1F2E12152A161A2E161BDAC0C0E08C90
+:1013E000177F930B7FA90688188F1978FB01C0E13E
+:1013F00065E13E29121A2F12138A352E121B9A1BF1
+:10140000AFEE2F1212C0A0AF9F79FB01B1EE9F1378
+:10141000881BC0F098127AE30A7EA9052A12037A83
+:101420008B01C0F165F10A2E12162E16192A121B15
+:10143000005104C0E100EE1AB0EE2E16170EFF1395
+:101440002F16180FCC01ACAA2F121A0EBC01ACFC3F
+:101450007FCB01B1AA2A161B2C161A63FC5E000072
+:101460007FB30263FE3163FE2B7EB30263FC306305
+:10147000FC2A00006450C0DA20DBC0581648C020A7
+:10148000D10FC09163FD7A00C09163FA44DA20DB8A
+:1014900070C0D12E0A80C09A2924682C7007581574
+:1014A00038D2A0D10F03470B18ED4FDB70A8287876
+:1014B00073022B7DF8D9B063FA6100002A2C74DB2B
+:1014C00040580EB363FAE4000029221D2D25027B4B
+:1014D0009901C0B0C9B62CB00728B000DA20068840
+:1014E0000A28824CC0D10B8000DBA065AFE7C0208A
+:1014F000D10FC09163FBFF00022A025802440AA2E6
+:1015000002060000022A025802410AA20206000056
+:10151000DB70DA20C0D12E0A80C09E2924682C708E
+:1015200007581517C020D10FC09463FBC9C096633C
+:10153000FBC4C09663FBBF002A2C74DB30DC405B2D
+:10154000FE11DBA0C2A02AB4002C200C63FF2700F0
+:101550008D358CB77DCB0263FDD263FC6D8F358EEC
+:10156000D77FEB0263FDC563FC6000006C1004C014
+:1015700020D10F006C1004C020D10F006C10042B80
+:10158000221E28221DC0A0C0942924062A25027BE1
+:101590008901DBA0C9B913ED06DA2028B0002CB010
+:1015A0000703880A28824CC0D10B8000DBA065AFFE
+:1015B000E7C020D10F0000006C10042C20062A2167
+:1015C0000268C80528CCF965812E0A094C6591048A
+:1015D0008F30C1B80F8F147FB00528212365812774
+:1015E00016ECF529629E6F98026000F819ECF1295B
+:1015F00092266890078A2009AA0C65A0E72A629DB6
+:1016000064A0E12B200C0CB911A6992D92866FD9FC
+:10161000026000DB1DECE90DBD0A2DD2A368D007E6
+:101620008E200DEE0C65E0C7279285C0E06470BF88
+:101630001DECEE68434E1CECED8A2B0CAA029A704E
+:1016400089200899110D99029971882A98748F320E
+:101650009F75282104088811987718ECDE0CBF11BB
+:10166000A6FF2DF285A8B82E84CF2DDC282DF68577
+:10167000C85A2A2C74DB40580E46D2A0D10FC02085
+:10168000D10F00000029CCF96490B12C206689317B
+:10169000B1CC0C0C472C24666EC60260008509F89C
+:1016A0005065807F1CECD38A2B0F08400B881008F4
+:1016B000AA020CAA029A7089200899110D99029920
+:1016C00071883398738C329C728A2A9A74893499FF
+:1016D0007563FF7D00CC57DA20DB30DC4058151DE8
+:1016E000C020D10F00DA20C0B65815AC63FFE5006A
+:1016F000DA205815AA63FFDC00DA20DB30DC40DD9D
+:1017000050581638D2A0D10FC858DA20DB30581400
+:101710008A2A210265AFBDC09409A9022925026366
+:10172000FFB200002B21045814351DECAFC0E02E91
+:1017300024668F302B200C0F8F1463FF662921380D
+:10174000C08879830263FF5B2C20662B2104B1CC17
+:101750000C0C472C24665814291DECA3C0E02E2441
+:10176000668F302B200C0F8F1463FF376C1004C072
+:10177000B7C0A116ECA015EC92D720D840B822C073
+:10178000400535029671957002A438040442C94B95
+:101790001AEC8519EC8629A67EC140D30F6D4A0547
+:1017A00000808800208C220A88A272D10FC05008C5
+:1017B000A53875B0E363FFD76C1006931394112915
+:1017C0002006655288C0716898052A9CF965A29820
+:1017D00016EC792921028A1309094C6590CD8AA05B
+:1017E0000A6A512AACFD65A0C2CC5FDB30DA208CDE
+:1017F000115814D8C0519A13C7BF9BA98E132EE25B
+:101800000968E0602F629E1DEC6A6FF80260008438
+:101810002DD22668D0052F22007DF9782C629DC735
+:101820009064C0709C108A132B200C2AA0200CBD41
+:1018300011A6DD0A4F14BFA809880129D286AF88F6
+:10184000288C09798B591FEC5C0FBF0A2FF2A36813
+:10185000F0052822007F894729D285D490659075AC
+:1018600060004300002B200C1FEC540CBD11A6DDC2
+:1018700029D2860FBF0A6E96102FF2A368F0048853
+:10188000207F890529D285659165DA20581543C9DD
+:101890005C6001FF00DA20C0B658154060000C0003
+:1018A000C09063FFB50000DA2058153C6551E48D07
+:1018B000138C11DBD08DD0022A020D6D515813AD5F
+:1018C0009A1364A1CEC75F8FA195A9C0510F0F478E
+:1018D0009F1163FEFD00C091C0F12820062C2066F8
+:1018E000288CF9A7CC0C0C472C24666FC6098D13E5
+:1018F0008DD170DE02290A00099D02648159C9D385
+:101900008A102B21045813BD8A13C0B02B24662ED5
+:10191000A2092AA0200E28141CEC338D1315EC27E5
+:10192000C1700A773685562DDC28AC2C9C12DED08F
+:10193000A8557CD3022EDDF8D3E0DA40055B02DC4B
+:10194000305BFF8AD4A028200CB455C0D02B0A8865
+:101950002F0A800C8C11A6CC29C285AF3FAB9929E8
+:10196000C6851CEC1CDEF0AC882D84CF2812022921
+:10197000120378F3022EFDF8289020D3E007880C9C
+:10198000C170080847289420087736657FAB891313
+:1019900013EC1A8990C0F47797491BEC18C1CA2838
+:1019A00021048513099E4006EE1187530488118592
+:1019B000520E88020C88029BA09FA18F2B9DA59898
+:1019C000A497A795A603FF029FA22C200C1EEC0152
+:1019D000AECE0CCC1106CC082BC2852DE4CF2BBC8F
+:1019E000202BC6852A2C748B11580D69D2A0D10FDB
+:1019F00028203DC0E07C877F2E24670E0A4765A023
+:101A00007B1AEBFF88201EEBED8F138EE48FF4081A
+:101A100088110A88020F8F14AFEE1FEBFA98910F0E
+:101A2000EE029E901EEBF9C0801AEBEA2CD285AA3A
+:101A3000BAB8CC28A4CF2CD6852C21022F20720E28
+:101A4000CC02B1FF2F24722C2502C020D10F8713A6
+:101A5000877007074763FD6E282138C099798B028C
+:101A600063FE9ADDF063FE9500DA20DB308C11DD39
+:101A70005058155CD2A0D10FC0E163FF7A8B138C54
+:101A800011DD50C0AA2E0A802A2468DA205813BC1F
+:101A9000D2A0D10FC020D10F6C1006292102C0D0D6
+:101AA0007597102A32047FA70A8B357FBF052D2535
+:101AB000020DD902090C4C65C18216EBBE1EEBBCAF
+:101AC00028629EC0FA78F30260018829E2266890B5
+:101AD000078A2009AA0C65A17A2A629DDFA064A169
+:101AE000772B200C0CBC11A6CC29C286C08C798324
+:101AF0000260015719EBB109B90A2992A36890074E
+:101B0000882009880C65814327C2851CEBB364716A
+:101B10003A8931098B140CBB016FB11D2C20669FD3
+:101B200010B1CC0C0C472C24666EC6026001400933
+:101B3000FF5065F13A8A102AAC188934C0C47F97E7
+:101B40003C18EBB31BEBB28F359C719B708B209DC7
+:101B50007408BB029B72C08298751BEBAE0F0840E5
+:101B60009B730F881198777FF70B2F2102284A006B
+:101B700008FF022F2502C0B4600004000000C0B0BE
+:101B80007E97048F362F25227D97048837282521BC
+:101B90007C9736C0F1C0900AF9382F3C20090942E1
+:101BA00064908619EB8018EB8128967E00F08800FF
+:101BB000A08C00F08800A08C00F08800A08C2A6225
+:101BC0009D2DE4A22AAC182A669D89307797388F1C
+:101BD000338A3218EB8A07BE0B2C2104B4BB04CC29
+:101BE0001198E0C08498E1882B9DE59AE69FE71A5A
+:101BF000EB82099F4006FF110FCC020A880298E28F
+:101C0000C1FC0FCC022CE604C9B82C200C1EEB71D1
+:101C10000CCA11AECC06AA0829A2852DC4CF09B9D9
+:101C20000B29A685CF5CC020D10FC081C0900F8941
+:101C300038C08779880263FF7263FF6600CC57DA89
+:101C400020DB30DC405813C3C020D10FDA205814F9
+:101C50005363FFE8C0A063FE82DA20C0B658144F79
+:101C600063FFD900DB402A2C74580CC9D2A0D10FD5
+:101C70008A102B21045812E11EEB4EC0D02D246691
+:101C800063FEB1006C1006D62019EB491EEB4B2801
+:101C9000610217EB4808084C65805F8A300A6A5178
+:101CA00069A3572B729E6EB83F2A922668A0048CB7
+:101CB000607AC9342A729D2C4CFECAAB2B600CB6DC
+:101CC0004F0CBD11A7DD28D2860EBE0A78FB269CDC
+:101CD000112EE2A32C160068E0052F62007EF91594
+:101CE00022D285CF2560000D00DA60C0B658142BD3
+:101CF000C85A60010F00DA60581428655106DC40AC
+:101D0000DB308D30DA600D6D5158129AD3A064A08B
+:101D1000F384A1C05104044763FF6D00C0B02C6080
+:101D2000668931B1CC0C0C472C64666FC602709684
+:101D30000A2B61045812B1C0B02B64666550B42AF6
+:101D40003C10C0E7DC20C0D1C0F002DF380F0F42EA
+:101D500064F09019EB1418EB1528967E8D106DDA4F
+:101D60000500A08800C08CC0A089301DEB247797A7
+:101D70005388328C108F3302CE0BC02492E1226143
+:101D8000049DE00422118D6B9BE59FE798E61FEB15
+:101D90001A0998400688110822020FDD02C18D9DA4
+:101DA000E208220292E4B4C22E600C1FEB0A0CE897
+:101DB00011A7882C8285AFEE0C220B2BE4CF228654
+:101DC00085D2A0D10F28600CD2A08C1119EB020C87
+:101DD0008D11A988A7DD2ED2852B84CF0ECC0B2C9C
+:101DE000D685D10FC0F00ADF387FE80263FF6C634D
+:101DF000FF6000002A6C74C0B2DC20DD4058128FF6
+:101E0000C0B063FF63C020D10F0000006C10042C31
+:101E1000221D2A221EC049D320293006243468C03E
+:101E2000407AC105DDA060000200C0D06E9738C0C6
+:101E30008F2E0A802B3014C0962934060EBB022E3A
+:101E400031022B34147E8004243502DE407AC10E28
+:101E5000C8ABDBD0DA302C0A00580AE52E31020E6E
+:101E60000F4CC8FEC020D10F6895F8283102080831
+:101E70004C658FEF1AEAD01CEACE2BA29EC09A7B4B
+:101E80009B462BC22668B0048D307BD93B29A29D8E
+:101E9000C0E3CB9394901BEAE02D31049B9608DDC0
+:101EA000110EDD029D979D9112EADDC0E524C4A2CA
+:101EB0002E34062F310228A29D02FF02288C3028E2
+:101EC000A69D2F3502C020D10FDA30C0B65813B30B
+:101ED000C020D10F6C1006292006689805289CF9AF
+:101EE00065825D29210209094C659210CD51DB30D4
+:101EF000DA20044C02581317C051D3A0C7AF2A36BA
+:101F00000AC0E019EAAD1DEAB31FEAAC8A3A16EA44
+:101F1000A9B1AC64C13528629E6F88026001F129C5
+:101F2000DC332992266890078B2009BB0C65B1E051
+:101F300027629DC08E6471D82B200C0CBC11A6CCDE
+:101F400029C2867983026001D219EA9B09B90A295C
+:101F500092A3971068900828220009880C6581BB1D
+:101F600027C2856471B5292006299CF96491EC2C5F
+:101F700020668931B1CC0C0C472C24666EC60260F9
+:101F800001A109F85065819B883689F4088C14AC4E
+:101F9000991CEA8B0C99022C2104997019EAA1086A
+:101FA00008479971892A09881008990218EA9E0839
+:101FB000990299722830132930120488100699105A
+:101FC00008990228302C9A740C881008C8020988D5
+:101FD00002987389379975883898768A39C0819ABA
+:101FE000771AEA918935987B99780989140A9902B8
+:101FF000997A8A30893277A73618EA808F33987CAD
+:10200000C084987D882B2E76112976122F7613198D
+:10201000EA7A0A9F4006FF1104CA110988020FAA32
+:1020200002987EC1F90FAA022A7610C0AA600001A8
+:10203000C0A6ADBF0CBC11A6CC29C2852EF4CF0919
+:10204000A90B29C685655107C020D10F2B200C0C88
+:10205000BC1106CC0828C28609B90A6F8902600142
+:102060002E2992A36890082A220009AA0C65A11FB4
+:102070002AC28564A11928203D08284064808C84E8
+:102080003504841464408485F574537F8436048455
+:1020900014644077745374293013C08C79886CC0F1
+:1020A000902924670908476580ED882089F48435E4
+:1020B0001FEA55048414A4940F440294A014EA5017
+:1020C00008881104880298A1843698A3048414A473
+:1020D000990F990299A219EA4CADB428C2852E44F1
+:1020E000CF288C1028C6852821022F20720988024B
+:1020F000B2FF2F2472282502C020D10F00CC57DA5E
+:1021000020DB30DC40581293C020D10FC09163FF18
+:102110008FDA20C0B658132163FFE100DA2058138C
+:102120001F63FFD88A102B21045811B41DEA2A1FFF
+:10213000EA232B200CC0E02E24668A3A63FE480076
+:1021400000DA20DB30DC40DD505813A6D2A0D10FDE
+:102150002A2C74DB40580B8ED2A0D10F292138C015
+:102160008879830263FE202A12002C20662B21042A
+:102170002CCC010C0C472C24665811A01DEA161F0C
+:10218000EA0F2B200CC0E02E24668A3A63FDF8008B
+:10219000DA2058130263FF64DA205BFF1CD2A0D15F
+:1021A0000F0000006C10089515C061C1B0D9402A1D
+:1021B000203DC0400BAA010A64382A2006291606D1
+:1021C00068A8052CACF965C33B1DE9FC6440052FEC
+:1021D000120564F29C2621021EE9F806064C65628F
+:1021E000E315E9F46440D98A352930039A140A9931
+:1021F0000C6490CC2C200C8B149C110CCC11A5CC15
+:102200009C122CC286B4BB7CB3026002D38F110E29
+:10221000FE0A2EE2A368E0098620D30F0E660C6545
+:1022200062BE88122882856482B6891464905EDA60
+:1022300080D9308C201EE9F21FE9F31DE9E08B14F0
+:102240008DD4D4B07FB718B88A293C10853608C61B
+:10225000110E66029681058514A5D50F550295804D
+:102260000418146D8927889608CB110888140EBBB2
+:1022700002A8D8299C200F88029BA198A088929B35
+:10228000A3088814A8D80F880298A22AAC1019E9CC
+:10229000DEC0C08F141EE9CF86128D11286285AE74
+:1022A000DD08FF0B2CD4CF2821022F66858B352A21
+:1022B0002072098802ABAA2825022A2472C020D1E4
+:1022C0000F29529E18E9BB6F9802600208288226E7
+:1022D00068800829220008990C6591F92A529DC14D
+:1022E000CA9A1364A1EF2B200C2620060CB811A566
+:1022F000882D82860EBE0A7DC3026002022EE2A3F2
+:1023000068E0082F22000EFF0C65F1F3288285DEBD
+:10231000806481FF9810266CF96461FF2C20668828
+:1023200031B1CC0C0C472C24666EC6026001BC088F
+:10233000FD5065D1B617E9BD19E9A21AE9A92C210A
+:10234000048B2D2830102F211D0C88100BFB090C3D
+:1023500088020A880209BB026441528910C04D9B61
+:1023600090979198928D35D9E064D06CD730DBD0BE
+:10237000D8307FD713273C10BCE92632168C39960B
+:10238000E69CE78A37B4389AE80B13146430492A7C
+:10239000821686799A9696978C778A7D9C982B825E
+:1023A000172C7C209A9A2A9C189B99867BB03BB864
+:1023B000896DB9218BC996A52692162AAC18B899B1
+:1023C0009BA196A08BC786CD9BA22B921596A49B12
+:1023D000A386CB2CCC2026A605C0346BD4200D3B85
+:1023E0000C0DD8090E880A7FB705C0909988BC8863
+:1023F000C0900B1A126DAA069988998B288C18C068
+:10240000D01BE98C1CE98B16E981B1FF2A211C2322
+:10241000E6130F0F4F26E6122F251D7FA906C0F0E9
+:10242000C08028251D05F6111AE97A8F202BE615A4
+:102430002CE6162DE61726E6180AFA022AE61429D3
+:102440002006299CF96490FF29200C8D15C0801A64
+:10245000E9610C9C11AA99A5CCDA202BC28528949D
+:10246000CF0B4B0B2BC685C0B08C1658118AD2A04F
+:10247000D10F8A356FA548D8308BD56DA90C8A86C7
+:102480000A8A14CBA97AB337288C10C08028246715
+:10249000080B4765B112DA20DB302C12065811AD5B
+:1024A000D3A0C0C1C0D02DA4039C1563FD268636E1
+:1024B00064610C8910C04D9B909791989263FEA423
+:1024C000C08163FFC78A15CCA7DA20DB308C165891
+:1024D00011A1C020D10FDA20C0B658123063FFE43A
+:1024E00000DA208B1158122D63FFD9009E178A1332
+:1024F0002B21045810C28E17C0B02B246663FE3403
+:10250000C08063FE09DA20DB308C16DD505812B52E
+:10251000D2A0D10FDA2058122163FFA82D2138C094
+:10252000C87DC30263FE0D8A132B21042C206698FC
+:1025300017B1CC0C0C472C24665810B08E17C0D0A5
+:102540002D246663FDEE0000262138B06606064F96
+:10255000262538656EF128206A7F870508294164A1
+:1025600090A5C0D01BE92619E93426200723E61BD5
+:10257000B16609FA022BE61A28200A2DE61D2AE682
+:102580001E09880228E61C882606064728E6202B16
+:10259000220826E53E2BE6212D24072C20062A20A2
+:1025A0006468C347B44463FE9EDB30DA208D15C0F7
+:1025B000CE2E0A802C24688C165810F1D2A0D10F90
+:1025C0008E102A321616E8FD0A2A1486662BE612A9
+:1025D00097E127E61328E614AA6609660296E02E1C
+:1025E000EC4869ED50C14663FD7A000064AFB41950
+:1025F000E8F328201689920A880C00910400881AB2
+:10260000A8B8982963FF9C002B21046EB81E2C20CB
+:1026100066B8CC0C0C472C2466C9C09E178A135888
+:1026200010778E17C0348F20C0D02D2466C0682646
+:10263000240663FF2C008D35C08064D04AD9E0DCCD
+:1026400030DBE0DF301AE8FDB188B4FF17E8FD8623
+:10265000C9249DFF8DC82CCC102D46300767012D55
+:1026600046320A66011DE8F7264631AD6D2D463328
+:1026700026F21597B796B684C3BCBB94B58D3529A1
+:102680009C107D83C22F211DC14663FD4B000000BD
+:102690006C1006292006289CF86582BF2921022B90
+:1026A000200C09094C6590E116E8C30CBA11A6AAE2
+:1026B0002DA2862C0A127DC30260028C19E8BF0984
+:1026C000B90A2992A36890078C2009CC0C65C278BE
+:1026D00029A2856492722D629E1AE8B56FD80260B5
+:1026E000026E2AA22629160168A0082B22000ABB26
+:1026F0000C65B25C29629DC18C6492542A21200A27
+:10270000806099102C203CC7EF000F3E010B3EB1BA
+:10271000BD0FDB390BBB098F260DBD112DDC1C0D48
+:102720000D410EDD038E27B1DD0D0D410FEE0C0DB9
+:10273000BB0B2BBC1C0BB7027EC71C2C21257BCBF3
+:10274000162D1AFC0CBA0C0DA16000093E01073EC3
+:10275000B1780987390B770A77EB0260020A2C21DE
+:1027600023282121B1CC0C0C4F2C25237C8B29B0A4
+:10277000CD2D2523C855DA20DB3058106F292102D2
+:10278000CC96C0E80E9E022E2502CC57DA20DB3014
+:10279000DC405810F0C020D10F2C20668931B1CC1C
+:1027A0000C0C472C24666EC6026001D309FD5065EF
+:1027B000D1CD2F0A012E301129221464E0112822D4
+:1027C0001B090C4400C10400FA1A0A880228261BBF
+:1027D0002E3010C0A0C0B0941295131CE878883039
+:1027E0002CC022088D14778704C0F10CFA38C04140
+:1027F000C0F225203CC0840858010F5F010F4B3800
+:1028000005354007BB10C0F0084F3808FF100FBB5C
+:102810000228ECFEC0F0084F38842B0BA8100AFFEA
+:10282000102A21200F88020B880208440218E8862B
+:102830008F110844022821250A2A14082814048824
+:10284000110A88022A210494F08B2004E41008BBAA
+:102850001104BB02C04A04BB029BF1842A08AB11DD
+:102860000BEB0294F40A54110B44020555100D1B96
+:102870004094F707BB100B5502085502C08195F62E
+:102880008433C05094F3B1948B3295F898F99BF24D
+:10289000C080C1BC24261499FA9BF598FB85389515
+:1028A000FC843A94FD8B3B9BFE883998FF85352547
+:1028B000F6108436851324F6118B3784122BF6120A
+:1028C000C0B064C07E89307797438D3288332E3014
+:1028D000108F111CE84A0999400699112CF614C072
+:1028E000C42CF6158C2B2DF61A28F61B2BF6190482
+:1028F000A81109880208EE0219E840C18008EE021A
+:1029000009C90229F6162EF618C09E600001C09A69
+:102910002F200C18E8300CFE11A8FFA6EE2DE28542
+:102920002BF4CF0D9D0B2DE685C87F8A268929A71C
+:10293000AA9A260A990C090948292525655050C0EC
+:1029400020D10F00C09A63FFC6DA2058111463FE2D
+:1029500038DA20C0B658111163FE2E0068973C2B60
+:102960009CFD64BE24C020D10FDA20DB705810CD4E
+:10297000C0C0C0D10ADA390ADC3865CDE063FE098F
+:102980008A102B2104580F9DC0B02B246663FE21B2
+:10299000DB402A2C7458097ED2A0D10FDA20580FC0
+:1029A000A263FCF76C1004C020D10F006C10042946
+:1029B0000A801EE8261FE8261CE7FF0C2B11ACBB83
+:1029C0002C2CFC2DB2850FCC029ED19CD0C051C0C6
+:1029D0007013E82214E82118E81F2AB285A82804F9
+:1029E000240A234691A986B8AA2AB685A9882784ED
+:1029F0009F25649FD10F00006C100AD6302830103C
+:102A0000292006288CF964829B68980B2A9CF9651A
+:102A1000A1B2022A02580F8489371BE7E8C89164E3
+:102A2000520E2A21020A0C4C65C2588D3019E7E17A
+:102A300074D7052E212365E29E2F929E1AE7DD6F43
+:102A4000F8026002532AA22668A0082C22000ACCB1
+:102A50000C65C2442A929D64A23E9A151FE7D78D49
+:102A600067C1E6C8DD2B620618E7D564B00528808B
+:102A7000217B8B432B200C18E7CF0CBC11A8CC2951
+:102A8000C28679EB460FBE0A2EE2A368E0052F222C
+:102A9000007EF9372CC2859C1864C2332B212F8706
+:102AA000660B7B360B790C6F9D266ED2462C203D33
+:102AB0007BC740CE5560001E2A200CC1B28C205826
+:102AC00010F79A1864A2458D6763FFCFC0C063FFFB
+:102AD000C5D7B063FFD300C0E06000022E60030ED4
+:102AE000DB0C6EB20EDC700CEA11AA6A2AAC20581C
+:102AF0000199D7A0DA20DB70C1C82D212058109190
+:102B00008C268B279A160CBB0C7AB3348F188963EA
+:102B100099F3886298F28E659EF82D60108A189D50
+:102B20001768D729C0D09DA92C22182B22139CAB43
+:102B30009BAA97A58E667E7302600097CF586000AF
+:102B40001FDA208B1658105765A13863FFBDC0816E
+:102B5000C0908F18C0A29AF999FB98FA97F563FF75
+:102B6000D2DB30DA20DC40580FFBC051D6A0C0C009
+:102B70002BA0102CA4039B172C1208022A02066B10
+:102B800002DF702D60038E179D149E100CDD11C0A6
+:102B9000E0AD6D2DDC205801188C148B16ACAC2CDC
+:102BA00064038A268929ABAA0A990C9A26886609A1
+:102BB000094829252507880C98662F2218A7FF2F7A
+:102BC000261863FE96DA20DB30DC40DD5058110514
+:102BD000D2A0D10FC0302C20668961B1CC0C0C473B
+:102BE0002C24666EC6026000D2C03009FD5065D04C
+:102BF000CA8E6764E069647066DB608C18DF70DA27
+:102C0000202D60038E170CDD119E10AD6D2DDC2084
+:102C10001EE78D5800F9232618DA208B16DC402F8A
+:102C20002213DD50B1FF2F2613580F9AD2A0D10FD7
+:102C30000028203D084840658DE76F953EDA308DCD
+:102C4000B56D990C8CA80C8C14CACF7CD32D2AACF2
+:102C500010C090292467090D4764DDC5600092000B
+:102C60002C1208066B022D6C20077F028E17DA20CB
+:102C70009E101EE77458007D63FF9A00C09163FFA9
+:102C8000D1000000655081DA20DB60DC40580FB1D4
+:102C9000C020C0F02FA403D10FDA20C0B658103FD7
+:102CA00063FFE000006F950263FD6CDA20DB30DC2F
+:102CB00040DD50C4E0580F32D2A0D10F8A152B212D
+:102CC00004580ECE232466286010981763FF210055
+:102CD000DA2058103263FFABC858DB30DA20580FC7
+:102CE000162A210265AF9CC09409A9022925026316
+:102CF000FF91DB30DC40DD50C0A32E0A802A24681F
+:102D0000DA20580F1FD2A0D10FC020D10FDA202B0C
+:102D1000200C58104763FF6B6C1004282006C0621B
+:102D2000288CF8658125C050C7DF2B221BC0E12A03
+:102D3000206B29212300A104B099292523B1AA00E1
+:102D4000EC1A0BC4010A0A442A246B04E4390DCCA2
+:102D5000030CBB012B261B64406929200C1BE715C3
+:102D60000C9A110BAA082FA2861BE7136FF90260B9
+:102D700000B60B9B0A2BB2A368B0082C22000BCC28
+:102D80000C65C0A42BA2851DE73664B09B8C2B2458
+:102D900021040DCC029CB08820C0C50888110C8885
+:102DA0000298B1882A08441198B48F3494B79FB51B
+:102DB000C0401EE7082DA2850E9E0825E4CF2DDC1D
+:102DC000282DA68529210209094C68941A689820A3
+:102DD000C9402A210265A00B2A221E2B221D7AB18E
+:102DE0000265A079C020D10F2C212365CFDE6000C1
+:102DF000082E21212D21237EDBD52B221E2F221DE3
+:102E00002525027BF901C0B064BFC413E6E92CB0EC
+:102E10000728B000DA2003880A28824CC0D10B8032
+:102E200000DBA065AFE763FFA62A2C74C0B02C0AB4
+:102E300002580E081CE70C9CA08B2008BB1106BB97
+:102E4000029BA1893499A263FF790000262468DAE5
+:102E500020DB30DC40DD50581063D2A0D10FDA20E7
+:102E60002B200C580FCEC020D10F00006C1006078D
+:102E70003D14C080DC30DB40DA20C047C02123BCD9
+:102E800030032838080842774001B1DD64815A1EBA
+:102E9000E6C519E6C629E67ED30F6DDA050050882F
+:102EA00000308CC0E0C02025A03C14E6C4B6D38F0F
+:102EB000C0C0D00F87142440220F8940941077F7A8
+:102EC00004C081048238C0F10B2810C044C0220421
+:102ED000540104FD3802520102FE3808DD10821C44
+:102EE00007EE100E6E020EDD02242CFEC0E004FE82
+:102EF000380AEE100E88020D88028DAB1EE6B4086B
+:102F0000D8020E880298B0C0E80428100E5E018432
+:102F1000A025A125084411084402052514045511D3
+:102F2000043402C0810E8E3994B18FAA84109FB4EC
+:102F300075660C26A11FC0F2062614600009000069
+:102F400026A120C0F20626140565020F7701078727
+:102F50003905E61007781008660206550295B62571
+:102F6000A1040AE61108581108280208660296B75B
+:102F7000C060644056649053067E11C0F489C288D4
+:102F8000C30B340B96459847994618E69B9F41041E
+:102F900059110E99021FE699020E4708D80298426D
+:102FA0000E99029F40C1E00E990299442FA00CB4E3
+:102FB000380CF91114E6881EE67FA4FFAE992E9214
+:102FC0008526F4CF0E880B289685D10F2BA00C1FD9
+:102FD000E6791CE6800CBE11ACBBAFEE2DE2852677
+:102FE000B4CF0D3D0B2DE685D10FC0800528387874
+:102FF000480263FEA263FE966C1006C0C06570F1C5
+:103000008830C030088714778712C0B0C0A619E690
+:103010006B299022C030CC97C031600003C0B0C093
+:10302000A6C0E0C091C0D4C08225203C0B3F1097C1
+:1030300012831CC0700858010D5D01089738C080CC
+:103040000B9838077710048810086802087702C0C8
+:10305000800D98382D3CFE0888100D9E388D2B0A67
+:10306000EE1008EE0207EE020CB8100FDD02053B71
+:10307000400EDD029D408920043D100899110D99F4
+:10308000022D210409A90208DD119941872A05B9F9
+:10309000100D3D020ABB110DBB02087702974428B0
+:1030A00021258712082814048811071E4007EE10F6
+:1030B0000E990275660926211F0626146000060077
+:1030C0002621200626140868029B47098802984694
+:1030D00029200CD2C0C0800C9E111BE63E1FE63595
+:1030E000AB99AFEE2DE2852894CF0DAD0B2DE68583
+:1030F000D10FDD40C0A6C0B08E51CAE0B2AAB1BBAC
+:103100002DDC108F500E7836981008770C9FD898C9
+:10311000D989538F52991199DB9FDA7E8309B1CCFB
+:10312000255C10C97763FFCF88108D1108E70C97D5
+:1031300051AD8DD7F078DB01B1F79D5397528830B0
+:10314000C030088714088840648ED565BEC963FE08
+:10315000BC0000006C1004D720B03A8820C0308238
+:1031600021CAA0742B1E2972046D080FC980C99151
+:103170008575B133A2527A3B0B742B0863FFE900CB
+:10318000649FECD10FD240D10F0000006C100AD622
+:10319000302E3027D950DA4015E6092430269A150A
+:1031A00029160464E0026493732920062A9CF865BA
+:1031B000A3CE2A2102270A040A0B4C65B3978C3050
+:1031C00074C7052D212365D4A0C0A62B0A032C2289
+:1031D00000580F0B64A3B917E5F78E389A1664E30D
+:1031E000BA2F6027285021C9F37E8311C2B08C20EA
+:1031F0002A200C580F2AD7A0CDA16004A200C2B08B
+:103200008C202A200C580EFED7A064A4862F212ED5
+:103210008B680FBF360FB90C6F9D54296027D5B04E
+:103220006E920528203D7B8F4CDA20DB50C1C42DE7
+:10323000211F580EC48B269A189A1989272AAC3850
+:103240000B990C7A93538963C08099738F62987835
+:103250009F728E659E798D679D7B8C6695759C7A35
+:103260008E687E53026000B18B1465B050600038E8
+:10327000DBF063FFA5008A14C9A92E60030E9B0C26
+:103280006EB2A5DC500CEA11AA6A2AAC285BFFB129
+:10329000D5A063FF93C0E063FFE2DA208B18580EDD
+:1032A0008165A2B163FF9E0000DA20DB308C1558E7
+:1032B0000E29D6A0C0C0C0D12D16042CA403DC70EA
+:1032C000DA20DB60DF502D6003C0E09E109D171EEA
+:1032D000E5D20CDD110D6D082DDC285BFF478E66F5
+:1032E0008F678817AF5FA8A828640375FB01B1EE4C
+:1032F0008A189E669F6789268829AA9909880C9949
+:10330000268E6808084805EE0C28252515E5AC9E94
+:103310006865EECC63FEE6000000C9432F21232B35
+:1033200021212FFC010F0F4F2F25237FBB026003AC
+:10333000142C20668961B1CC0C0C472C24666EC617
+:103340000260022809FD5065D22264E1B62E602792
+:1033500064E1B0DC70DF50DA20DB601EE5C32D6075
+:1033600003C08098100CDD11AD6D2DDC285BFF22B1
+:10337000644181C0442B0A008C202A200C580EA0E6
+:103380000AA70265A00FC0B02C22002A200C580EFC
+:103390009CD7A064AFEFDA20C1BCC1C82D21208F1B
+:1033A000188E268929AFEE9E260E990C0909482908
+:1033B0002525580E64C090C050C0C288609A191E5E
+:1033C000E57FC0A12EE022088F14778704C0810E0C
+:1033D0008938C0800B93102D203C2921200CDC0162
+:1033E00004DB010929140BA8380CA5380D3D401C3D
+:1033F000E5968B2B088810075510085502053302F7
+:103400002821250F154003BB020CBB0207551005F0
+:10341000D3100828140ADD11048811098802053325
+:10342000022921040833029B70C0808A201BE58F8B
+:1034300008AA110BAA029A71C0A1852A93769574E5
+:1034400008931103DD020ADD029D778C63C1DC9CC9
+:10345000738B6298789A799B72232214C0C0B1351D
+:103460002526149C7B9D75937A2B621A9B7C2A627D
+:103470001C9A7D28621D987E25621B957F2362170A
+:103480002376102D62182D76112C62192C76126479
+:10349000E0B98E6077E73DC0FE13E5571DE558C1E2
+:1034A000818A628B630495110E9C4006CC110C55E9
+:1034B00002247615085502C0802D76148D2B2B76AC
+:1034C0001B2A761A28761925761803DD022D761622
+:1034D0006000030000C0FA2E200C19E53E18E53507
+:1034E000A9E90CEE11A8EEC0802DE2852894CF0D3D
+:1034F000FD0B2DE685DA208B198C158D14580D6582
+:10350000D2A0D10FDC70DF50DB602D6C28C0A01E74
+:10351000E5569A10DA205BFE5563FE53002B203DE2
+:103520000B4B4065BC826FE527DA308F556DE90C97
+:103530008EAA0E8E14C9E87EF3162AAC10C090290C
+:103540002467090F4764FC6060015F00C0FA63FFF5
+:1035500085C09163FFE88814658168DA20DB608CA0
+:1035600015580D7CC020C09029A403D10F8A162BBA
+:103570002104580CA2C0A02A24668E6863FDCA00EC
+:10358000002B9CF965B0FDDA20580CA763FC2200E3
+:1035900000DA20C0B6580E0163FFBA002B200C0CD5
+:1035A000BE11A7EE2DE286C1C27DC30260011819CB
+:1035B000E50209B90A2992A36890082A220009AAFB
+:1035C0000C65A10326E2856460FD2C20668931B17B
+:1035D000CC0C0C472C24666FC60270960C8A162BF6
+:1035E0002104580C86C0D02D24668E3077E74D1C00
+:1035F000E5021BE5028F328833C0A42D21040E9909
+:103600004006991104DD1109DD029A61C19009DDBE
+:10361000029B60C0908B2B9D649F66986799650C98
+:10362000BB029B6228200C1AE4EBAA8A0C8811A723
+:10363000882F828529A4CF2FFC202F86858A1465A8
+:10364000A0A6C020D10FB0FC8B142C2523C8B70234
+:103650002A02066B02580CB82A210265AEF7C0D8C0
+:103660000DAD022D250263FEEC008E14C8E8DA20B1
+:10367000DB30580CB12A210265AEDA07AF022F25E4
+:103680000263FED100DA20DB308C158D14580E5504
+:10369000D2A0D10FDA202B200C580DC063FEB6004B
+:1036A000DA202B200C580DE263FEAADA20DB308CE6
+:1036B000152D12042E0A80280A00282468580CB000
+:1036C00063FAE500C020D10FDA20580DB48914CD7B
+:1036D00092DA20DB308C15580D1FDBA0C020C0A073
+:1036E0002AB403D10FC020D10F2A2C748B15580691
+:1036F00028D2A0D10F0000006C100C2821029410D9
+:1037000008084C6583621FE4AB29F29E6F98026043
+:1037100003661DE4A729D2266890082A220009AA78
+:103720000C65A3542CF29D64C34E2B200C0CB611D7
+:10373000AF66286286C1EC78E30260034619E49E16
+:1037400009B90A2992A36890078A2009AA0C65A3DF
+:103750003224628564432CC0E12A3109C0702724D9
+:103760006689359A11992A88369912982B89379843
+:1037700013992C883899140858149815982D89395C
+:103780002A25042E251D29251C283028C0922824EE
+:103790003C2A302908084798160989012A243D2A1D
+:1037A000311599170A094109A90C299CEC29251FF3
+:1037B0007E87192D2A000DA06000083E010A3EB147
+:1037C000AD08DA390EAA110A990C29251F2A211FE2
+:1037D00018E4A80A8160C1D0941A951B01083E0024
+:1037E000053EB184054839843C259CFC0D8836296A
+:1037F000201408AA1C8D3D2726182E26132E2614C9
+:103800002E261527261B2E246B27246727246808BD
+:10381000581C0909432924142932112A252E282548
+:103820002F27252427252527252C27252325252037
+:103830002425212D2522841A2D211C851B6FD202BF
+:10384000600209C0A099186D080AB1AA00A104007D
+:10385000E91A7D9B0263FFEE8918C080C0E1C07049
+:10386000C0D29B1D951B961C9C1E16E4722C203DFD
+:1038700015E4820C0B400DCC010BE7381DE4640A03
+:1038800077100CE8380B8810C0C49C410877029D63
+:1038900040B0A80988118B209C499D48954B9643C0
+:1038A000087702861418E47315E45A08770205BBFA
+:1038B000029B4A9B4297468812871108DA149A4E57
+:1038C0000D88100D77110877021AE44E06D8140DF2
+:1038D0006610087702974FC78F984D984C98458788
+:1038E0001598440715140D55110A5502954715E40E
+:1038F000638A262D46102D46182D46202C46112C65
+:1039000046192C46212B46122B461A2846142846C7
+:10391000152B462288162546242546268B170A0C89
+:1039200048090D4885130EDD1105CC110839400BEF
+:10393000EB390299101EE4520DCC020D5511082DE1
+:10394000400655022E461316E41D0FDD11254616BE
+:10395000080840851B0188100DBB0286671DE449DD
+:103960000988020CBB0219E4191CE4472B46172DE9
+:10397000461BA7661BE446C0702C461C0988028CB7
+:103980001E28461E2B4623C0908B1D29461D294606
+:103990001F18E43F2946272846252931162E2006E0
+:1039A00029246A243117962D242538861CCCE1273A
+:1039B0002407C0D7090E4064E0829A29092841648F
+:1039C000809164409B2D2406C098094936280AA09E
+:1039D00024628501C404A84428210424668508883B
+:1039E000118E3F8A3E2D32100EA41800C4040EAE74
+:1039F0001800EE110ACA530EDD02C0E30E880298C9
+:103A0000C11EE42409084E9EC08E2094C398C59D13
+:103A1000C418E3F01DE42105EE110EAA020DAA025E
+:103A2000A8B82784CF9AC21EE3E224F29D27E4A21D
+:103A3000244C1824F69D655052C020D10F2D240629
+:103A4000C0A0C09809493604A93863FF7FC0A063AD
+:103A5000FE070000654F6DC098C0A82A240663FFCA
+:103A60006B2D2406C09063FF63CC57DA20DB308CCB
+:103A700010580C38C020D10F00DA20C0B6580CC73F
+:103A800063FFE500DA20580CC563FFDC2A2C748B39
+:103A90001058053FD2A0D10F6C10062820068A339B
+:103AA0006F8202600161C05013E3C229210216E354
+:103AB000C1699204252502D9502C20159A2814E3B7
+:103AC000BF8F2627200B0AFE0C0477092B711C647C
+:103AD000E1398E428D436FBC0260016F00E104B09A
+:103AE000C800881A08A80808D80298272B2006685A
+:103AF000B32ECE972B221E2C221D0111027BC90151
+:103B0000C0B064B0172CB00728B000DA2003880AD0
+:103B100028824CC0D10B8000DBA065AFE7C020D16C
+:103B20000F2D206464DFCA8B29C0F10BAB0C66BF7C
+:103B3000C02B200C0CBC11A6CC28C2862E0A0878FB
+:103B4000EB611EE39D0EBE0A2EE2A368E00528226B
+:103B5000007E894F29C2851EE3A96490461FE3B603
+:103B60009E90C084989128200A95930F880298927D
+:103B70008E200FEE029E942F200788262F950A98FC
+:103B8000969A972E200625240768E3432921022AC6
+:103B9000C2851DE3902AAC20ADBD25D4CF2AC685B1
+:103BA00063FF4E002E2065CBEDC082282465C9F648
+:103BB00005E4310002002A62821BE3982941020BCE
+:103BC000AA022A668209E43129210263FF23000048
+:103BD00064DFB88F422E201600F1040DEE0C00EECB
+:103BE0001AAEAE9E2963FFA38A202B3221B1AA9A76
+:103BF000B0293221283223B4992936217989A92B79
+:103C000032222B362163FFA0C020D10F9F2725240D
+:103C100015ACB828751C2B2006C0C12EBCFE64E074
+:103C2000AB68B7772DBCFD65DEC72D2064C0F0649E
+:103C3000D0868E290EAE0C66E089C0F128205A2865
+:103C40008CFE08CF3865FEE863FF580000E004935F
+:103C500010C0810AF30C038339C78F08D80308A862
+:103C60000108F80C080819A83303C80CA8B828756F
+:103C70001C030B472B24158310CBB700E104B0BC09
+:103C800000CC1AACAC0CDC029C27659E5EC0B20B6B
+:103C9000990209094F29250263FE50002D206A0D63
+:103CA0002D4165DF7EDA20C0B0580C8F64AF18C09C
+:103CB000F163FEEF9F2763FFD02E221F65EE326374
+:103CC000FF79000028221F658E2763FF6E252406DA
+:103CD00029210263FE1B00006C10066571332B4C1A
+:103CE00018C0C7293C18C0A1C08009A838080842DC
+:103CF0006481101CE32C1AE32D2AC67E2A5CFDD3B6
+:103D00000F6DAA0500B08800908C8940C0A009887A
+:103D1000471FE355080B47094C50090D5304DD10AC
+:103D2000B4CC04CC100D5D029D310CBB029B3088DD
+:103D3000438E2098350FEE029E328D26D850A6DD98
+:103D40009D268E40C0900E5E5064E0971CE33B1EA3
+:103D5000E32B038B0BC0F49FB19EB02D200A99B3C7
+:103D60000CDD029DB28F200CFF029FB48E262D2009
+:103D7000079EB68C282DB50A9CB72924072F20064C
+:103D80002B206469F339CBB61DE30D2320168DD2A9
+:103D90000B330C00D10400331AB48DA3C393292232
+:103DA000200C13E30C1FE3030C2E11AFEEA322290A
+:103DB00024CF2FE285D2A00FDD0B2DE685D10F0099
+:103DC0002E200CB48C0CEB111FE3031DE2FAAFEEB6
+:103DD000ADBB22B28529E4CF02C20B22B685D2A0A8
+:103DE000D10F00002E200C1CE2F31FE2FA0CEB11A5
+:103DF000AFEEACBB22B28529E4CF02820B22B6859E
+:103E0000D2A0D10FC0D00BAD387DC80263FEEC63E9
+:103E1000FEE08E40272C747BEE12DA70C0B32C3C8F
+:103E200018DD50580A868940C08063FEE3066E02A2
+:103E3000022A02DB30DC40DD505800049A10DB50CF
+:103E4000DA70580453881063FEF700006C10069275
+:103E5000121EE2E48C40AE2D0C8C472E3C1804CA96
+:103E60000BD9A07DA30229ADF875C302600084C000
+:103E7000B0C023C0A09D106D0844B89F0EB80A8D35
+:103E8000900EB70BB8770D6D36ADAA9D800D660C00
+:103E9000D8F000808800708C879068B124B22277B7
+:103EA000D3278891C0D0CB879890279C100070882A
+:103EB00000F08C9D91CB6FC08108BB0375CB36633E
+:103EC000FFB4B1222EEC1863FFD485920D770C86D7
+:103ED000939790A6D67D6B01B1559693959260000D
+:103EE00016B3CC2D9C188810D9D078D3C729DDF80B
+:103EF00063FFC100C0238A421BE2E900CD322D449A
+:103F0000029B3092318942854379A1051EE2E50E7C
+:103F1000550187121BE2D5897095350B99029932AC
+:103F200088420A880C98428676A6A696768F44AF79
+:103F3000AF9F44D10F0000006C10089311D6308859
+:103F400030C0910863510808470598389812282115
+:103F500002293CFD08084C6581656591628A630A07
+:103F60002B5065B18B0A6F142E0AFF7CA60A2C20F9
+:103F70005ACCC42D0A022D245A7FE0026002158912
+:103F80002888261FE2C809880C65820F2E200B0F97
+:103F9000EE0B2DE0FE2EE0FF08DD110EDD021EE22D
+:103FA000C2AEDD1EE2C21CE2C20EDD010DCC37C185
+:103FB00080084837B88DB488981089601AE2807BF1
+:103FC00096218B622AA0219C147BA3179D132A2083
+:103FD0000C8B108C20580BB18C148D13DBA0CEAC45
+:103FE0006001C4002E200C1BE2730CEA110BAA081E
+:103FF0002BA2861FE2717BDB3B0FEF0A2FF2A36837
+:10400000F0052822007F892C2BA28564B0AA876244
+:104010008826DE700C7936097A0C6FAD1C8F279BD1
+:104020001508FF0C77F3197E7B729D139C149B156A
+:10403000CF56600025C0B063FFD0D79063FFDD008E
+:10404000009D139C14DA20DB70580B168B158C1412
+:104050008D1365A06A8E6263FFCC00DA208B11DCC1
+:1040600040580ABCD6A08B15C051DE70DA20DC6047
+:10407000DD405BFF768D138C14D9A02E200C1BE243
+:104080004D1FE2540CEA11AFEFC0E0ABAA2BA285A2
+:104090002EF4CF0B990B29A68563FF1D00DA20DCD7
+:1040A00060DD40DE708912282007DF50A9882824AF
+:1040B000075BFF09D2A0D10F00DBE0DA20580B37F5
+:1040C0006550EF2A20140A3A4065A0EBDB60DC4023
+:1040D000DD30022A025809A7D6A064A0D584A183A6
+:1040E000A00404470305479512036351C05163FEC2
+:1040F0005C2C2006D30F28CCFD6480A568C704C0C3
+:10410000932924062C2006C0B18D641FE22C9D2724
+:104110009D289D298FF29D2600F10400BB1A00F016
+:1041200004B0BE0EDD01C0F0ADBB8D652F24070DC0
+:104130000E5E01EE11AEBB2E0AFEB0BB0B0B190ECC
+:10414000BB36C0E20B0B470EBB372B241618E224FC
+:104150000A09450D0B422B240B29240AB4BE2E2438
+:104160000C7D88572920162FCCFDB09D0A5C520D7E
+:10417000CC362C246465FDEC0C0C4764CDE618E2CB
+:104180000F8E2888820C9F0C00810400FF1AAFEE6E
+:104190009E2963FDCF1CE23E63FE13001CE23563E3
+:1041A000FE0C8D6563FFA500DA202B200C580B2038
+:1041B000645F0FC020D10F00C020D10FC09329240D
+:1041C00016C09363FFA000006C1004C06017E1F8F4
+:1041D0001DE1FBC3812931012A300829240A78A175
+:1041E00008C3B27BA172D260D10FC0C16550512605
+:1041F00025022AD0202F200B290AFB2B20142E2049
+:104200001526241509BB010DFF0928F11C2B2414C8
+:10421000A8EE2EF51C64A0A92B221E28221D011138
+:10422000027B8901DB6064B0172CB00728B000DA8C
+:104230002007880A28824CC0D10B8000DBA065AF24
+:10424000E7DB30DC40DD50DA205800DE29210209AE
+:104250000B4CCAB2D2A0D10F00CC5A2C30087BC173
+:10426000372ED02064E02D022A02033B02DC40DD21
+:10427000505800D4D2A0D10F2B2014B0BB2B241443
+:104280000B0F4164F0797CB7CAC0C10C9C022C258D
+:1042900002D2A0D10FC020D10F2E200669E2C12684
+:1042A00024062B221E2F221D29200B2820150D99B4
+:1042B000092A911C262415AA8828951C7BF149609F
+:1042C0000048B0BB2B24140B0A4164A0627CB702E7
+:1042D0002C25022B221E2C221DD30F7BC901C0B01E
+:1042E000C9B62CB00728B000DA2007880A28824C0B
+:1042F000C0D10B8000DBA065AFE7C020D10F00006C
+:10430000262406D2A0D10F0000DB601DE1AC64BF03
+:104310004F2CB00728B000DA2007880A28824CC04A
+:10432000D10B8000DBA065AFE71DE1A463FF310086
+:1043300026240663FF9C00006C1004282006260A31
+:10434000046F856364502A2920147D9724022A0271
+:10435000DB30DC40DD50580019292102090A4CC825
+:10436000A2C020D10FC0B10B9B022B2502C020D1CF
+:104370000F00022A02033B022C0A015800D1C9AAED
+:10438000DA20DB30DC405809F329A011D3A07E9756
+:10439000082C0AFD0C9C012CA411C0512D201406E0
+:1043A000DD022D241463FFA4DA20DB30DC40DD5075
+:1043B000C0E0580973D2A0D10F0000006C1006169F
+:1043C000E17D1CE17D655157C0E117E179282102AB
+:1043D0002D220008084C6580932B32000B6951296F
+:1043E0009CFD6590872A629E6EA84C2A722668A062
+:1043F000027AD9432A629DCBAD7CBE502B200C0C97
+:10440000BD11A6DD28D2862F4C0478FB160CBF0AFE
+:104410002FF2A368F0052822007F89072DD285D3CB
+:104420000F65D0742A210419E1A3D30F7A9B2EDAE9
+:104430002058086E600035002D21041BE19E7DBBD5
+:1044400024DA20C0B6580869CA546001030B2B5007
+:104450002B240BB4BB0B0B472B240C63FFA0DA20DF
+:10446000580A4E600006DA20C0B6580A4C6550E083
+:10447000DC40DB302D3200022A020D6D515808BDA0
+:104480001CE14ED3A064A0C8C05184A18EA0040436
+:10449000470E0E4763FF3500002B2104C08C893185
+:1044A000C070DF7009F950098F386EB8172C20667C
+:1044B000AECC0C0C472C24667CFB099D105808CF11
+:1044C0008D1027246694D11EE151B8DC9ED0655032
+:1044D00056C0D7B83AC0B1C0F00CBF380F0F42CBAE
+:1044E000F119E13018E13228967EB04BD30F6DBA46
+:1044F0000500A08800C08C2C200CC0201DE1360CCB
+:10450000CF11A6FF2EF285ADCC27C4CF0E4E0B2EB9
+:10451000F685D10FC0800AB83878D0CD63FFC100CE
+:104520008E300E0E4763FEA12A2C742B0A01044D17
+:10453000025808C22F200C12E1270CF911A699A2EB
+:10454000FF27F4CF289285D2A008480B289685D162
+:104550000FC020D10F0000006C1004C060CB55DBF1
+:1045600030DC40055D02022A025BFF94292102092A
+:10457000084CC882D2A0D10F2B2014B0BB2B24141E
+:104580000B0C41CBC57DB7EBC0C10C9C022C2502A6
+:10459000D2A0D10F0000022A02033B02066C02C027
+:1045A000D0C7F72E201428310126250228240A0F0F
+:1045B000EE012E241458010E63FFA300262406D218
+:1045C000A0D10F006C1006282102D62008084C65E7
+:1045D000809D2B200C12E0F70CB811A2882A82864D
+:1045E000B5497A930260009719E0F409B90A299253
+:1045F000A36890082A620009AA0C65A08228828517
+:104600001CE0FF6480799C80B887B14B9B819B1034
+:10461000655074C0A7D970280A01C0D0078D380D25
+:104620000D42CBDE1FE0E01EE0E12EF67ED830D357
+:104630000F6D4A0500808800908C2E3008C0A000C5
+:10464000EE322E740028600C19E0E30C8D11A2DD0F
+:10465000A988C0202CD2852284CFD2A00CBC0B2CE0
+:10466000D685D10FC0F0038F387FA0C063FFB400A0
+:10467000CC582A6C74DB30DC405807F6C020D10FD0
+:10468000DA605809C663FFE7DD402A6C74C0B0DC0D
+:104690007058086A2E30088B1000EE322E740028F5
+:1046A000600C19E0CC0C8D11A2DDA988C0202CD2A1
+:1046B000852284CFD2A00CBC0B2CD685D10F000054
+:1046C0006C1004292014282006B19929241468812B
+:1046D00024C0AF2C0A012B21022C24067BA004C08D
+:1046E000D02D2502022A02033B02044C02C0D058FE
+:1046F00000C0D2A0D10FC020D10F00006C1004293F
+:104700003101C2B429240A2A3011C28378A16C7BFA
+:10471000A1696450472C2006C0686FC562CA572D36
+:1047200020147CD722DA20DB30DC40DD505BFFA593
+:10473000292102090E4CC8E2C020D10FC0F10F9F01
+:10474000022F2502C020D10FDA20DB30C0C05BFF72
+:10475000DC28201406880228241463FFC7292015AA
+:104760001BE0972A200BC0C09C240BAA092BA11C7C
+:104770002C2415AB9929A51C63FF9900C020D10FEB
+:10478000DA20DB30DC40DD50C0E058087DD2A0D11B
+:104790000F0000006C1004CB5513E09225221F0D72
+:1047A000461106550CA32326221E25261F06440B60
+:1047B00024261E734B1DC852D240D10F280A80C038
+:1047C0004024261FA82828261E28261DD240D10FA7
+:1047D000C020D10F244DF824261E63FFD80000000E
+:1047E0006C1004D620282006C0706E85026000D4AC
+:1047F0001DE07919E07112E06F2A8CFC64A1302B66
+:104800006102B44C0B0B4C65B0A22B600C8A600C9F
+:10481000B8110288082E828609B90A7EC302600098
+:104820009A2992A368900509AA0C65A08E28828512
+:10483000648088B8891BE07594819B80655155C060
+:10484000B7B8382A0A01C0C009AC380C0C4264C0A1
+:10485000421FE0541EE0562EF67EB04AD30F6DAADA
+:104860000500808800908CC0A029600C0C9C11A2CF
+:10487000CC2BC285AD990B4B0B2BC6852860062728
+:1048800094CF6881222D6015D2A0C9D2C0E22E64D7
+:1048900006D10F00C0F008AF387FB0BD63FFB10094
+:1048A000276406D2A0D10F00D2A0D10F00CC57DAD6
+:1048B00060DB30DC405808A7C020D10FDA6058090F
+:1048C0003763FFE80028221E29221DD30F789901A3
+:1048D000C080C1D6C1C11BE043C122AB6B64804222
+:1048E00078913F2A80000CAE0C64E0BB02AF0C64F0
+:1048F000F0B52EACEC64E0AF0DAF0C64F0A92EACBB
+:10490000E864E0A32FACE764F09D2EACE664E0978A
+:104910002F800708F80BDA807B83022A8DF8D8A055
+:1049200065AFBC28612308D739D97060007B0000CF
+:104930002B600C0CB811A2882C82862A0A087CAB4A
+:104940007E09BA0A2AA2A368A0052C62007AC96F60
+:104950002A828564A0691FE029276504C0E3C0C4DA
+:104960002E64069CA11CE0549FA02E600A97A30C05
+:10497000EE029EA28F600CFF029FA42E60147AEFBD
+:104980004627A417ADBC2F828527C4CF2FFC202F2C
+:10499000868563FE692A6C74C0B1DC90DD405807DF
+:1049A000A71DE00C63FEC100D9A0DA60DB30C2D0E5
+:1049B000C1E0DC4009DE39DD505807F1D2A0D10F4B
+:1049C000DA605808F663FEE4290A0129A4170DBF2E
+:1049D000082E828527F4CF2EEC202E868564500B7E
+:1049E0002A6C74DB4058016AD2A0D10FC020D10FCD
+:1049F0006C10062B221E28221D93107B8901C0B04B
+:104A0000C0C9C03BC1F20406401DDFF6C0E2C0745D
+:104A10000747010E4E01AD2D9E11C0402E0A1464B1
+:104A2000B06E6D084428221D7B81652AB0007EA1EE
+:104A30003B7FA1477B51207CA14968A91768AA1434
+:104A400073A111C09F79A10CC18B78A107C1AE29B8
+:104A50000A1E29B4007CA12B2AB0070BAB0BDAB0DD
+:104A60007DB3022ABDF8DBA0CAA563FFB428B0104D
+:104A700089116987BB649FB863FFDC00647FB463FE
+:104A8000FFD50000646FD0C041C1AE2AB40063FFFF
+:104A9000C62B2102CEBE2A221D2B221E7AB12A8CC1
+:104AA000107CB1217AB901C0B0C9B913DFC1DA20D5
+:104AB00028B0002CB00703880A28824CC0D10B8094
+:104AC00000DBA065AFE7D240D10F8910659FD463AA
+:104AD000FFF300006C1008C0D0C8598C30292102A7
+:104AE0000C0C4760000C8E300E1E5065E19E292193
+:104AF00002C0C116DFB0090B4C65B0908A300A6E57
+:104B00005168E3026000852F629E1BDFA96EF85397
+:104B10002BB22668B0052E22007BE94727629DB79D
+:104B200048CB7F97102B200CB04E0CBF11A6FF294D
+:104B3000F2869E12798B4117DFA007B70A2772A36E
+:104B4000687004882077893029F285DF90D79065D6
+:104B500090652A210419DFD77A9B22DA205806A310
+:104B6000600029002C21041BDFD37CBB18DA20C095
+:104B7000B658069EC95860014CC09063FFCCDA203D
+:104B8000580886600006DA20C0B65808846551359A
+:104B9000DC40DB308D30DA200D6D515806F6C0D088
+:104BA000D3A064A120292102C05184A18CA00404B7
+:104BB000470C0C4763FF3E00C09C8831DBD008F8EF
+:104BC00050089B3828210498116E8823282066AC51
+:104BD0008C0C0C472C24667CBB159F139E148A10EA
+:104BE0008B115807068E148F13C0D02D24668A307F
+:104BF000C092C1C81BDF867FA6099BF099F12CF4F7
+:104C00000827FC106550A4B83ADF70C051C0800777
+:104C1000583808084264806718DF6319DF64298602
+:104C20007E6A420AD30F6DE90500A08800F08CC0AF
+:104C3000A08930B4E37F9628C0F207E90B2C9408D2
+:104C40009B909F912F200C12DF630CF811A68829EE
+:104C50008285A2FF2DF4CFD2A009330B238685D104
+:104C60000F22200C891218DF5B0C2B11A6BBA82287
+:104C70002D24CF2CB285D2A00C990B29B685D10F4B
+:104C8000C087C0900A593879809663FF8ADB30DA92
+:104C900020C0C1C0D05BFF56292102C0D02A9CFE93
+:104CA00065AE4D2D2502C09063FE45009E142A2C52
+:104CB00074C0B1DC70DD405806E18E14C0D01BDF3B
+:104CC00053C1C863FF6AC020D10F00006C100628D2
+:104CD000210216DF3808084C65821929629E6F98F8
+:104CE0000260022019DF332992266890078A200982
+:104CF000AA0C65A20F27629DC0CC6472072B210409
+:104D00008E31C0A0DDA00EFE500ECD386EB8102C36
+:104D10002066B1CC0C0C472C24667CDB026001EFD2
+:104D2000C0C12930081BDF2564909C2F0AFFC0D327
+:104D3000B09E64E1026892136450882A2C74044B7C
+:104D4000025800930AA20206000000002B200C2744
+:104D500021040CBC11A6CC29C286280A087983023A
+:104D60006001B919DF1509B90A2992A36890082EC4
+:104D7000220009EE0C65E1A42EC28564E19E262086
+:104D80000713DF1E6E7B0260019A17DF151FDF1EFF
+:104D900019DF4BC0D228200A93E09DE1A9690F8852
+:104DA0000298E22F90802A9480B1FF07FF029FE3D0
+:104DB0002EC2851FDF080EDE0BAFBF2AF4CF2EC632
+:104DC00085655F76C020D10F2830102930112E3034
+:104DD0001300993200ED326480EE2A30141FDF3860
+:104DE00000AA3278EF050F9E092DE47F1EDF36669C
+:104DF000A0050F98092A8480B4A718DF33C76F0075
+:104E00009104AE9EDDE000AF1A00C31A6EE1052DDD
+:104E1000B2000DED0C1EDF2D08D81C063303AE8842
+:104E20002A848B2EB02E27848C03EE010FEE022EE7
+:104E3000B42E58018F63FEFF29310829250428303C
+:104E4000142E3109B0886480A32E240AC0812E302C
+:104E5000162CB4232E240BB4EF2F240C8C378B3656
+:104E6000292504DEB0DFC00C8F390B8E390FEE021E
+:104E700064EEC4089F1101C4048D380CB81800C436
+:104E8000040CBE1800EE110EDD02C0E30EFF021E80
+:104E9000DF019F719E701EDF008F2098739D740547
+:104EA000FF110BCD53C18098750FDD020EDD029D01
+:104EB000721EDEBF2A24662F629D2AE4A22FFC18F0
+:104EC0002F669D63FE710000002F30121BDF010072
+:104ED000FA3278FF050B980B2A847F66D0050B9A6F
+:104EE0000B2DA4802A301100AA3263FF442F240A1C
+:104EF0009E2B63FF56CC57DA20DB30DC4058071579
+:104F0000C020D10F00DA20C0B65807A463FFE50027
+:104F1000DA7058063AC0A02A246663FE02DA2058E6
+:104F2000079F63FFCFB16928200A862009094799A6
+:104F30001129240798107F812693E027E50A9AE338
+:104F400088109DE119DEDD8D11096F029FE42DE4CB
+:104F500016098802C0D398E22A240763FE51000094
+:104F60001DDEA60868118F11892B93E008FF02C08F
+:104F70008F9FE50D990299E2047F11C0D49DE1084D
+:104F8000FF029FE463FFD0006C1004C020D10F002B
+:104F90006C100485210D381114DE848622A42408A7
+:104FA000660C962205330B9321743B13C862D230F2
+:104FB000D10FC030BC29992199209322D230D10F32
+:104FC000233DF8932163FFE36C100AD62094181751
+:104FD000DE79D930B83898199914655252C0E1D2A7
+:104FE000E02E61021DDE760E0E4C65E1628F308E82
+:104FF000190F6F512FFCFD65F1558EE129D0230E5D
+:105000008F5077E66B8F181EDEB3B0FF0FF4110FD1
+:105010001F146590CE18DEB08C60A8CCC0B119DE2C
+:105020006428600B09CC0B0D880929811C28811A82
+:105030002A0A0009880C08BA381BDEA60CA90A291E
+:1050400092947B9B0260008C2B600C94160CBD111B
+:10505000A7DD29D286B8487983026000D219DE56CE
+:1050600009B80A2882A398176880026000A360002C
+:10507000A51ADE9A84180AEE01CA981BDE4D8C1917
+:105080002BB0008CC06EB3131DDE4A0C1C520DCC2D
+:105090000B2DC295C0A17EDBAE6000380C0C5360B6
+:1050A000000900000018DE8C8C60A8CCC0B119DEAD
+:1050B0004028600B09CC0B0D880929811C28811A16
+:1050C0002A0A0009880C08BA380CA90A2992947E89
+:1050D000930263FF72DA60C0BA580730645073609D
+:1050E000026600001ADE338C192AA0008CC06EA361
+:1050F0001A18DE2F0C1C5208CC0B18DE762BC2952A
+:10510000C0A178B30263FF3F63FFC9000C0C536377
+:10511000FF09896078991829D285C9922B729E1D42
+:10512000DE246EB8232DD226991369D00B60000DB2
+:10513000DA6058071A6000170088607D890A9A1A99
+:1051400029729D9C129915CF95DA60C0B658071345
+:105150006551F58D148C18DBD08DD0066A020D6D6B
+:1051600051580584D3A09A1464A1DD82A085A1B80A
+:10517000AF9F190505470202479518C05163FE60AD
+:105180002B6104C08C8931C0A009F950098A386E9E
+:10519000B81F2C6066A2CC0C0C472C64667CAB114B
+:1051A0009F119E1B8A155805958E1B8F11C0A02A32
+:1051B00064669F1164F0E12912032812096DF91742
+:1051C0002F810300908DAEFE0080889F9200908C0E
+:1051D000008088B89900908C65514E8A10851A8B92
+:1051E000301FDE06881229600708580A2C82942D89
+:1051F00061040ECC0C2C86946FDB3C1CDE30AC9C26
+:1052000029C0800B5D50A29909094729C48065D047
+:10521000DA2E600CC0D01FDDEF0CE811AFEEA788CE
+:105220002282852DE4CF02420B228685D2A0D10FA7
+:105230008E300E0E4763FDA6A29C0C0C472C640713
+:105240007AB6CD8B602E600A280AFF08E80C6481CC
+:105250000E18DE1983168213B33902330B2C341661
+:105260002D350AC02392319F30C020923308B202FC
+:1052700008E80292349832C0802864072B600CD270
+:10528000A01CDDD40CBE11A7EE2DE285ACBB28B46A
+:10529000CF0D9D0B2DE685D10F8B1888138D30B85F
+:1052A0008C0D8F470D4950B4990499100D0D5F0472
+:1052B000DD1009FF029F800DBB029B8165508D852B
+:1052C0001AB83AC0F1C0800CF83808084264806B04
+:1052D0001BDDB519DDB629B67E8D18B0DD6DDA059A
+:1052E00000A08800C08CC0A063FEF30082138B1660
+:1052F0001DDDC628600AC0E02EC4800D880202B2FF
+:105300000B99239F20C0D298229D2122600CB2BB12
+:105310000C2D11A7DD28D28508BB0B18DDAE2BD6CE
+:1053200085A8222E24CFD2A0D10F9E1B851A2A6CCD
+:10533000748B185BFF178E1B63FEA300C087C090A1
+:105340000AF93879809263FF86C020D10F9E1B2A0C
+:105350006C74C0B18D185805398E1B851A63FE7E9A
+:10536000886B8213891608BE110ECE0202920B9E24
+:1053700025B4991EDDA19F200E88029822C0EF045B
+:10538000D8110E88029824C0E49E21C080D2A02BA0
+:10539000600C2864071CDD8F0CBE11A7EE2DE28582
+:1053A000ACBB28B4CF0D9D0B2DE685D10F000000BE
+:1053B0006C1004C020D10F006C10048633C071C083
+:1053C00030600001B13300310400741A04620174CA
+:1053D00060F1D10F6C1004022A02033B025BFFF65E
+:1053E0001CDD771BDDBFC79F88B009A903098A01AF
+:1053F0009AB079801EC0F00FE4311DDD6E0002000E
+:105400002BD2821EDDB82AC1020EBB022BD6820A25
+:10541000E431D10F28C102C19009880208084F2841
+:10542000C50208E431D10F006C1004C0C00CE43197
+:1054300012DD631ADD6000020029A28218DDAC1BB8
+:10544000DDAA2621020B990108660129A6822625DC
+:105450000206E43114DDA715DDA2236A902326128B
+:105460008550242611252613222C40D10F00000040
+:105470006C1008D6102B0A64291AB41ADD4D0D23BE
+:10548000111CDD4E0F2511B81898130E551118DD9B
+:1054900099AC55A838AA332C80FF2A80FEA933285E
+:1054A0008D0129800108AA112880000CAA02088811
+:1054B0001109880208AA1C288C08281604580862BA
+:1054C00014DD3F0AA7022441162A30802B1204075C
+:1054D000AA2858085DB1338B13B4559A6004AC28E0
+:1054E000B4662C56277B69E016DD769412C050C056
+:1054F000D017DD329D15D370D4102F60802E6082BE
+:105500009F169E17881672891A8D128C402A607F0A
+:105510000DCC282B3A200CAA2858084BC0B10ABE43
+:10552000372E35408F1772F91A8D128C402A608100
+:105530000DCC282B3A200CAA28580843C0B10ABE2B
+:10554000372E3542B233B444B1556952B6B466C051
+:10555000508F15B877D370B2FF9F156EF899D10FA1
+:105560006C1004C021D10F006C1004270A001CDD50
+:10557000111FDD221EDD251DDD0E1ADD501BDD5E37
+:10558000C02824B0006D2A75AA48288080C0916484
+:10559000806100410415DD09C03125502E00361A06
+:1055A0000655010595390C56110C66082962966E50
+:1055B000974D0D590A29922468900812DD42024243
+:1055C0000872993B23629512DD06CB349F3002822C
+:1055D000020E4402C092993194329233AD52246249
+:1055E00095C090244C1024669524B0002924A0AACC
+:1055F00042292480B177B14404044224B400D10F7D
+:10560000D10FD10F6C10041ADCEA2AA00058021C3A
+:105610005BFFD5022A02033B025BFFD11BDCE8C91A
+:10562000A12CB102C0D40DCC020C0C4F2CB5020C35
+:10563000E431D10FC0A00AE43118DCDE0002002FF3
+:10564000828219DCF12EB10209FF022F86820EE45C
+:1056500031D10F006C1004C02002E43114DCD816E4
+:10566000DCD5000200226282234102732F0603E48C
+:1056700031C020D10F19DD221ADD212841020A2A6A
+:10568000010988012A668228450208E43115DD18DF
+:1056900012DD1D25461DD10F6C1004292006289C03
+:1056A000F96480A02A9CFD65A0968A288D262F0A81
+:1056B000087AD9042B221FC8BD2C206464C0812E17
+:1056C00022090EAE0C66E0782B200C1EDCBA0CBC56
+:1056D00011AECC28C28619DCB878F3026000AD099F
+:1056E000B90A2992A36890082E220009EE0C65E001
+:1056F0009B29C2851FDCC26490929F90C0E41FDC8E
+:10570000CE9E9128200AC0E09E930F88029892882E
+:10571000200F880298942F20079A979D962F950A1C
+:105720002E240728200629206468833328C2851286
+:10573000DCA9288C20A2B22E24CF28C685C020D177
+:105740000FC020D10F2A206A0111020A2A4165AF39
+:1057500052DA20C0B05805E464AFE5C021D10F0093
+:10576000649FC81FDC962D20168FF209DD0C00F116
+:105770000400DD1AADAD9D2912DC9728C285A2B2C6
+:105780002E24CF288C2028C685C020D10FC021D13F
+:105790000F0000006C1004260A001BDCDB15DC8700
+:1057A00028206517DC84288CFE6480940C4D110D34
+:1057B000BD082CD2F52BD2F42ED2F77CB13DB4BB70
+:1057C0002BD6F47BE9052BD2F62BD6F47CB92C2A08
+:1057D000D2F62AD6F52AD6F406E431000200287261
+:1057E000822AFAFF004104290A012F510200991A66
+:1057F0000A99030988012876820FE4312624652B53
+:10580000D2F48E5A2CD2F5B0EE9E5A7BCB1629D20A
+:10581000F62FD2F70CB80C09FF0C08FF0C0F2F1451
+:10582000C8F96000320BCA0C0A2A14CEA92B510207
+:10583000C0C20CBB020B0B4F2B55020BE431D10F36
+:1058400000DB30DA205BFF941BDCB064AF5D0C4DF5
+:1058500011ADBD63FFA8000006E4310002002F7205
+:105860008218DC6E2E510208FF022F76820EE43180
+:10587000D10F00006C1004C03003E43116DC4E156B
+:10588000DC4F00020024628274472118DCA0875A92
+:10589000084801286682CD7319DC9E0C2A11AA994A
+:1058A0002292832992847291038220CC292B510267
+:1058B0000BE431C020D10F001FDC972E51020FEEF8
+:1058C000012E55020EE431B02DB17C9C5A12DC92AF
+:1058D00008DD112D5619D10F6C10061BDC351EDCAE
+:1058E0003722B0001ADC8E6F23721DDC75C0481899
+:1058F000DC8D1FDC8BDC10D5C083F000808600506F
+:105900008A6D4A4F0F35110D34092440800B560A19
+:10591000296294B1330E55092251400F44110C44B1
+:105920000A874009A80C02883622514107883608A8
+:10593000770CA8992966949740296295874109A810
+:105940000C02883607883608770CA899296695973F
+:1059500041030342B13808084298F0D10F1CDC72B1
+:1059600013DC7327B0002332B5647057C091C0D0E8
+:1059700016DC7115DC6FC0402AC00003884328C4C0
+:10598000006D793C004104B14400971A7780148E71
+:10599000502FB2952DB695AFEE2EED2006EE369E29
+:1059A0005060001877A00983509D5023B695600081
+:1059B0000223B295223D2006223622B695B455B870
+:1059C000BBD10F0003884328C400D10F6C1004C062
+:1059D0004004E43115DC59000200885013DC58CB38
+:1059E000815BFFBD1CDC570C2D11ADCC2BC2822A74
+:1059F000C28394507BAB142EC28429C2850ABD0C8D
+:105A00000E990C0D990C0929146000050BA90C09BD
+:105A10002914993015DBEA2A51020AE4312A2CFCB8
+:105A200058004B2B32000AA2022BBCFF9B30CCB695
+:105A3000C8A4D2A0D10F000004E4311EDBDE0002B6
+:105A4000002DE2822FBAFF2C51020FDD012DE682DC
+:105A50000CE431D10F0000006C1004D10F000000E5
+:105A60006C1004C020D10F006C100413DC36C0D1C0
+:105A700003230923318DC0A06F340260008D19DB30
+:105A8000CD1BDBCE17DC2F0C2811A87726728325BF
+:105A900072822CFAFF76514788502E7285255C045D
+:105AA00025768275E9052572842576827659292E18
+:105AB00072842E76822E76830AE4310002002392CD
+:105AC000820021042FB10200D61A0C6603063301AE
+:105AD0002396820FE43126728325728260000200D1
+:105AE000D8A07659220AE4310002002392820021D4
+:105AF0000400D21A2FB1020C220302320122968234
+:105B00000FE431D280D10F00D280D10FC020D10F4D
+:105B10006C1004DB30862015DBA6280A002825023D
+:105B2000DA2028B0002CB00705880A28824C2D0AFC
+:105B3000010B8000DBA065AFE61ADB9F0A4A0A2949
+:105B4000A2A3C7BF769101D10F2BA6A3D10F00004E
+:105B50006C1004C0D1C7CF1BDB9919DB9617DB94FF
+:105B60000C2811A87786758574C0A076516288507C
+:105B70008E77B455957475E90385769574765927B3
+:105B80008F769F759F740AE431000200239282B4DD
+:105B90002E2FB10200E10400D61A0C660306330171
+:105BA0002396820FE431867583747639280AE431AE
+:105BB0000002002E9282B42200210424B10200DFF0
+:105BC0001A0CFF030FEE012E968204E431D280D12D
+:105BD0000FD8A07651D6D280D10F00006C100429C6
+:105BE0000A801EDB9A1FDB9A1CDB730C2B11ACBBEB
+:105BF0002C2CFC2DB2850FCC029ED19CD0C051C064
+:105C00007013DB9614DB9518DB932AB285A8280461
+:105C1000240A234691A986B8AA2AB685A98827848A
+:105C20009F25649FD10F00006C100419DBC70C2A5C
+:105C300011A9A98990C484798B761BDBB5ABAC2AFA
+:105C4000C2832CC2847AC1688AA02BBC30D3A064E2
+:105C5000A05E0B2B0A2CB2A319DB7F68C0071DDBEB
+:105C6000BBD30F7DC94AA929299D0129901F68919D
+:105C70003270A603D3A0CA9E689210C7AF2AB6A3FB
+:105C80002A2CFC5BFFB3D230D10F000013DBB10331
+:105C9000A3018C311DDB510C8C140DCC012CB6A34F
+:105CA00063FFDC00C020D10FDA205BFFCCC020D125
+:105CB0000FC020D10F0000006C1004DB30C0D019E1
+:105CC000DB3CDA2028300022300708481209880A15
+:105CD00028824CDC200B80001BDB370C4A11ABAA5E
+:105CE00029A28409290B29A684D10F006C1004C0B5
+:105CF0004118DB3017DB320C2611A727277030A89C
+:105D000066256286007104A35500441A7541482235
+:105D1000628415DB5202320BC922882117DB2F085F
+:105D20008414074401754905C834C020D10FD10F30
+:105D30000809471DDB86C0B28E201FDB1D0E0E43F7
+:105D4000AFEC2BC4A00FEE0A2DE6242A6284C020FB
+:105D50000A990B296684D10FC020D10F6C1004DB87
+:105D600030C0D018DB13DA20253000223007085865
+:105D70000A28824CDC200B80008931709E121BDBCC
+:105D80000D0C4A11ABAA29A28409290B29A684D19A
+:105D90000F09C95268532600910418DB08C0A12FCF
+:105DA000811200AA1A0AFF022F85121EDB020C4D77
+:105DB00011AEDD2CD2840C2C0B2CD684D10FC081DB
+:105DC0001FDAFFB89A0A0A472EF11200A1040088D0
+:105DD0001A08EE022EF5121DDAF70C4C11ADCC2B81
+:105DE000C2840B2B0B2BC684D10F00006C1004DB7C
+:105DF00030C0D019DAEFDA202830002230070988C5
+:105E00000A28824CDC200B80001CDAEA0C4B11AC17
+:105E1000BB2AB2840A2A0B2AB684D10F6C1004C0A4
+:105E20004118DAE416DAE60C2711A626266030A817
+:105E300072252286006104A35500441A7541082288
+:105E4000228402320BD10F00C020D10F6C10041538
+:105E5000DB410249142956112452120208430F88CB
+:105E600011C07300810400361A008104C78F0077C7
+:105E70001A087703074401064402245612D10F0082
+:105E80006C10066E23026000AC6420A7C0A08510D1
+:105E900013DB1916DB30C040A6AA2BA2AE0B1941AA
+:105EA00064906668915D68925268933C2AA2AA2821
+:105EB0003C7F288C7F0A0A4D2980012880002AAC6B
+:105EC000F20888110988027589462B3D0129B00026
+:105ED0002BB0010899110B99027A9934B8332A2A08
+:105EE00000B1447249B160004A7FBF0715DB1B63F4
+:105EF000FFB90000253AE863FFB10000253AE863E6
+:105F0000FFA90000250A6463FFA1C05A63FF9C003B
+:105F100000705F082534FF058C142C34FE70AF0B25
+:105F20000A8D142E3D012AE4012DE400DA405BFDC8
+:105F30005063FFA7D10FD10F6C10041ADAA019DA41
+:105F40009D1CDB061BDB07C080C07160000D0000DC
+:105F50000022A430B1AA299C107B915F26928679F9
+:105F6000C2156E6262C0206D080AB12200210400D1
+:105F7000741A764BDB63FFEE2292850D63110325C5
+:105F800014645FCFD650032D436DD9039820B422FB
+:105F90000644146D49229820982198229823982429
+:105FA00098259826982798289829982A982B982CED
+:105FB000982D982E982F222C4063FF971EDA7E276B
+:105FC000E68027E681D10F00C02063FF8300000038
+:105FD0006C1004C062C04112DA791ADA7513DAE182
+:105FE0002AA00023322D19DADB2BACFE2992AE6EEB
+:105FF000A30260008E090E402D1AC2C2CD0EDC39FC
+:106000002C251664B0895BFF9E15DAD71ADAD12BDE
+:106010003AE80A3A0158058C2B21160ABB28D3A06E
+:106020009B505805A32B52000ABB082A0A005805AA
+:10603000A215DACE2D21022C3AE80C3C2804DD0210
+:106040002D25029C5058059A8B50AABBC0A158051B
+:106050009A1CDAC72D21020C3C2806DD0213DAC592
+:106060002D25029C305805928B30AABBC0A2580542
+:10607000922A2102C0B40BAA020A0A4F2A2502580A
+:1060800005A6D10F242423C3CC2C251663FF76004C
+:1060900018DABD1CDAB919DABA1BDAB817DA8B8547
+:1060A000202E0AFD1FDAB92D202E24F47A24F47E46
+:1060B00024F4820EDD0124F4862E0AF70755280603
+:1060C000DD02C0750EDD01050506AB5BA959C0E810
+:1060D000AC5C24C4AB0EDD0227C4AC2E0ADFA8558D
+:1060E00027B4EC0EDD0124B4EBC2E027942C0EDDC6
+:1060F0000224942B2E0A800D0D4627546C24546BD9
+:106100000EDD022D242E63FEFC0000006C10042A1C
+:106110000A302B0A035BFF4D12DA8FC39029261633
+:10612000C3A1C0B3C08A2826175BFF48C03CC3B1D7
+:106130002B26161ADA222AA02023261764A079C358
+:10614000A2C0B15BFF42C3A2C0B15BFF40C3C22C7F
+:106150002616C2AFC0B12326175BFF3CC28F28268C
+:1061600016C0FE2F2617C2E22E26162A0AA1C0B19B
+:10617000C0D82D26175BFF352A0AA12A2616C3A6EA
+:10618000C0B3C1922926175BFF31C3C62C2616C1A6
+:10619000B32A0AA22B2617C0B35BFF2C290AA22917
+:1061A0002616C185282617C2FB2F2616C0E72E26E5
+:1061B000171DDA762D2610D10FC3A2C0B35BFF23C3
+:1061C00063FF82006C10041CDA3F1BDA2C18DA70B3
+:1061D00017DA7116DA7115DA71C0E0C0D414DA3B3F
+:1061E0001FD9F7C0288FF06D2A36DAC0D9C07C5B82
+:1061F000020FC90C1CDA350C9C28A8C3A6C22A368B
+:10620000802A2584A4C2A7CC2D248C2B248A2B245D
+:10621000872E248BB1BB2E369F2C369E2C369DB1FB
+:10622000AC1CDA161BDA5FC0286D2A33DAC0D9C07D
+:106230007C5B020FC90C1CDA240C9C28A8C3A6C2E4
+:106240002A36802B2584A4C2B1BBA7CC2D248C2E4A
+:10625000248B2A248A2E369F2C369E2C369DB1AC58
+:10626000C07919DA141BDA5113DA4F1ADA4F18DA37
+:106270005014DA1516DA5004F42812DA4F04660CBA
+:10628000040506A252A858AA5AA3539B3029A50078
+:1062900027848AC091C0A52A848C29848B17DA4868
+:1062A00018DA47A75726361D26361E2E361F16DA51
+:1062B0004513DA45A65504330C2826C82E75002D43
+:1062C00054AC2E54AB2E54AA2326E62326E52E26C4
+:1062D000E7D10F006C100613DA2317DA1E24723D83
+:1062E0002232937F2F0B6D08052832937F8F026334
+:1062F000FFF3C0C4C0B01AD9B1C051D94004593954
+:1063000029A4206E44020BB502C3281ED9ACDDB00F
+:1063100025E422052D392DE421C0501EDA2C19DA8E
+:106320001C18DA1C16DA1E1DDA2A94102A72451778
+:10633000D9E76DA94BD450B3557A5B17DF50756B15
+:10634000071FD99E8FF00F5F0C12D9DF02F228AE23
+:106350002222D681D54013D9DC746B0715D99885D4
+:106360005005450C035328B145A73FA832A9332255
+:10637000369D22369E2436802B369F2BF48B2CF4B0
+:106380008C14D9F824424DC030041414C84C6D0844
+:1063900006B133041414C84263FFF20015D985C452
+:1063A000400031041AD986C0D193A200DD1AC13849
+:1063B000B0DD9DA318D9EC2B824D29824E29A51C56
+:1063C0002882537A871E2C54008E106FE45D12D9F8
+:1063D0007B2F211D23211C2F251B04330C23251C5F
+:1063E00023251AD10FC06218D9DB88807E87D9890E
+:1063F000102654006F94191BD9712AB11C0A1A1463
+:1064000004AA0C2AB51C2AB51D2AB51A2AB51BD117
+:106410000F1BD96A2AB11C0A1A1403AA0C2AB51C2C
+:106420002AB51D2AB51A2AB51BD10F001CD9642B19
+:10643000C11D2DC11C2BC51B03DD0C2DC51C2DC57D
+:106440001AD10F006C100619D95D14D9C212D9C522
+:1064500015D9E0C73FC0E02E56A82E56A92E56AA41
+:106460002E56AB23262918D985DB101CD9DAC0D4C7
+:106470002A42452D16019C1000B0890A880C2896E6
+:10648000005BFF942B22E318D94D0B5B149B842AED
+:1064900022E48B84B1AA0A5A140BAA0C9A852922E9
+:1064A000E509591499862F22CD0F5F149F875BFF52
+:1064B000455BFF1623463BC1B01DD9401CD99E2A1F
+:1064C000D1022C463A0BAA020A0A4F2AD5025804D6
+:1064D000925BFEBF5BFE98C050C0B016D93614D98F
+:1064E0003E17D9AEC0C0C73E93122C262DC03060D7
+:1064F00000440000007F9F0FB155091914659FF4F7
+:10650000C0500AA9027FA7EF18D92ADA5008580A02
+:1065100028822C2B0A000B8000005104D2A0C091CD
+:10652000C7AF00991A0A99039912CE3864206BD329
+:10653000202B20072516032C12022A62827CA863D6
+:1065400018D91C01110208580A28822CDA500B8035
+:1065500000D2A0643FD58A310A8A1404AA01C82A4D
+:106560002B22010B8B1404BB017BA945DDA07A7B98
+:10657000081DD9122DD2000DAD0CDB3019D90D1A22
+:10658000D95288130ADA28DC801DD99009880A2894
+:10659000823C0DAA080B8000652F93D320C0B06306
+:1065A000FF9400007FAF34B1550050040A0919630D
+:1065B000FF42DAB07B7B081AD9012AA2000ABA0C82
+:1065C0001BD9428C310BAB280C8A141CD980ACBB74
+:1065D0001CD98004AA012BC68163FF8F645F60C051
+:1065E00050C0B0C7CE9C1263FF5500006C1004274A
+:1065F000221EC08008E4311BD8EF0002002AB282BC
+:1066000019D8EF003104C06100661A2991020A6AA4
+:10661000022AB68209E43115D94A0C3811A8532848
+:1066200032822432842A8CFC7841102921022A36B5
+:106630008297A0096902292502D10F002B21022C83
+:1066400032850B6B022CCCFC2C368297C02B25029A
+:10665000D10F00006C1004C0E71DD8D21CD8D40D97
+:106660004911D7208B228A200B4B0BD2A007A80CF4
+:106670009B72288CF4C8346F8E026000A31FD8CAA6
+:10668000A298AF7B78B334C93DC081C0F0028F3887
+:106690000F0F42C9FA2CD67ED5206D4A05003088EE
+:1066A00000508C887008980878B16DD2A09870D18D
+:1066B0000FC0F0038F387FE0DE63FFD8027B0CAFA2
+:1066C000BB0B990C643047D830C0F1C05002F5388C
+:1066D0000505426450792CD67E0B36122F6C100FB4
+:1066E0004F366DFA0500808800208C06440CC0816E
+:1066F000C05003B208237C0C038538050542645062
+:106700005A2CD67ED30F6D4A0500208800308CD2DB
+:10671000A0A798BC889870D10FD2A0BC799970D1ED
+:106720000FD2302BAD08C0F1C0500BF53805054233
+:10673000CB542CD67E083F14260A100F660C064652
+:10674000366D6A0500208800B08C827063FF2D00D2
+:10675000C05003F53875E08063FF7A00C0600286A0
+:106760003876E09F63FF9900C05003F53875E0C4A8
+:1067700063FFBE006C1004D62068520F695324DA00
+:1067800020DB30DC405800F3D2A0D10FDA20DB3020
+:10679000DC405800F09A2424240EC02122640FC04B
+:1067A00020D10F00B83BB04C2A2C7489242D200E28
+:1067B0002E200FA4DDB1EE2E240FB0DD2D240E28E7
+:1067C00090072D9003A488B088B1DD2D9403289400
+:1067D000075BFFA069511DC0E082242A600F18D812
+:1067E000FE2A240329600E8F2029240708FF029F18
+:1067F000209E64D10FC020D10F0000006C100494C3
+:106800002319D8F6C0B3083A110BAA02992019D857
+:10681000699A2116D867C05028929D2564A2288CB9
+:106820001828969DD10F00006C1004282066C038EF
+:10683000232406B788282466D10F00006C100603B5
+:106840005A0C0D36110D5C11D8208B2282210CBB05
+:106850000C06550F9B8202320B928113D853D9201C
+:10686000A38F6450561CD84FC0D71BD850A256C017
+:10687000E1C09004E93809094276F34F044302CAA3
+:10688000912BC67ED30F6DAA0500208800308C891D
+:1068900081A95909FA0C64A07D99818A8264A00FAC
+:1068A000D290D10FC06002E63876D0D763FFD10016
+:1068B000C020BC89998199809282D10F7F230429BD
+:1068C0002DF8998165BFD863FFE50000028F0CA306
+:1068D000FF0F3312931003AA0CD3406490402BC6D1
+:1068E0007E8610D30F6D6A0500208800308CBC8234
+:1068F000C090A4F3C041034938090942CA9B2BC682
+:106900007E6DAA0500208800308C0F590CA989BC27
+:1069100099998163FF8400BC89998163FF7C00C0E1
+:106920006002E63876D0B963FFB300C07002473822
+:1069300077D0CD63FFC700006C100414D82AC15271
+:10694000A424CA3128221D73811C292102659016B6
+:106950002A300075A912022A02033B022C3007C01C
+:10696000D25801D0653FDCD10F2B300703BB0B0B96
+:10697000BA0274B3022ABDF8D3A063FFC4000000BA
+:106980006C1004292006C0706E9741292102C08F27
+:106990002A2014C0B62B240606AA022A24147980C1
+:1069A000022725022A221E2C221D7AC10EC8ABDA2C
+:1069B00020DB302C0A00033D025BF80D6450742D7F
+:1069C00021020D0D4CC9D3C020D10F00002E9CFB1D
+:1069D00064E0822F21020F0F4C65F0911AD7F61C4C
+:1069E000D7F429A29EC08A798B5D2BC22668B00499
+:1069F0008D207BD95229A29DC0F364904A97901DA7
+:106A0000D8062E21049D9608EE110FEE029E979E49
+:106A10009118D802C0E527C4A22E24062BA29D2FD0
+:106A200021022BBC3008FF022F25022BA69DC0207F
+:106A3000D10F00002F300068F939DA20DB30044C28
+:106A40000258004463FF7700022A022B0A0658000E
+:106A5000D3220A00D10F6550102830006889240223
+:106A60002A02033B02DC4058003BC020D10FD27009
+:106A7000D10F00002A2C74033B02044C025BFEF58C
+:106A800063FF3B00DB30DC402A2C745BFEF2C0204D
+:106A9000D10F00006C1004C83F89268829A399995A
+:106AA0002609880C080848282525CC52C020D10F7B
+:106AB000DB402A2C745BF936D2A0D10F6C1004D8BD
+:106AC00020D73082220D451105220C928264207459
+:106AD00007420B13D7B5D420A383732302242DF8C8
+:106AE000858074514CBC82C0906D081600408800AF
+:106AF000708C773903D720C0918680743901D420F7
+:106B000074610263FFE2CA98C097C0411BD835C0C8
+:106B1000A00B8B0C0B4A380A0A42C9AA1DD7A21C2B
+:106B2000D7A32CD67EC140D30F6D4A050020880024
+:106B3000308C9780D270D10FBC8FC0E00F4E387E62
+:106B400090E263FFD6BC8292819280C0209282D173
+:106B50000F0000006C1006C0D71CD7921BD7940DF5
+:106B60004911D7202E221F28221D0E4E0BD280073E
+:106B70008A0C2E761F2AAC80C8346FAE026000CB20
+:106B80002F0A801AD798A29EAA7A7EA33FC93FC037
+:106B9000E1C05002E538050542CA552BC67EDB2010
+:106BA000D30F6D4A0500308800B08C2E721DAE9E4A
+:106BB0000EA50C645086D2802E761DC091298403C8
+:106BC000D10FC05003E53875D0D363FFCD15D785FD
+:106BD000027E0CA5EE643051C0A1250A0002A53842
+:106BE000033A020505426450922BC67E0E3512957B
+:106BF00010255C10054536D30F6D5A0500A088009E
+:106C0000208CC0A1A3E2C05023FA8003730C03A51B
+:106C100038AF730505426450722BC67E851005455A
+:106C20000C6D5A0500208800308CD280C0A10E9BCC
+:106C30000CAB7BAFBB2B761D2A8403D10FD280C057
+:106C4000C1AF7D2D761D2C8403D10F00D2302E8D47
+:106C500008C0F1C0500EF538050542CB592BC67E51
+:106C60000A3F14C1600F660C064636D30F6D6A05E5
+:106C700000208800E08C22721D63FF03C061C050B9
+:106C800003653875D80263FF6263FF5CC05002A5DC
+:106C90003875D08763FF8100C06003F63876D0BFB7
+:106CA00063FFB9006C10042A201529201614D7435D
+:106CB0000A990CCB9D2E200B04ED092BD11C8F289B
+:106CC00009BC36ACAA0CBB0C2BD51C0A0A472A24DB
+:106CD00015CAAF8B438942B0A800910400881AA856
+:106CE000FF0FBB029B278F260FB80C783B1AC020E2
+:106CF000D10F0000292102C0A20A9902292502C051
+:106D000021D10F008B2763FFDC2BD11C0CAA0C0AAE
+:106D10000A472A2415ACBB2BD51CC9AE8B438C2843
+:106D20008F42B0AD00F10400DD1AADCC0CBB029B6C
+:106D300027DA20B7EB580019C021D10F9F2763FF36
+:106D4000EF0000006C100428203C643047053060E0
+:106D500000073E01053EB156076539054928C77F42
+:106D6000A933030641076603B166060641A6337ED2
+:106D7000871E222125291AFC732B1502380C098144
+:106D80006000063E01023EB12406423903220AD1C8
+:106D90000FD230D10FC05163FFC000006C10042728
+:106DA000221EC08008E4311DD7030002002CD282CD
+:106DB0001BD703003104C06100661A2BB1020C6CB2
+:106DC000022CD6820BE43119D7870C3A11AA9328EA
+:106DD00032829780253282243284B45525368275DA
+:106DE000410A292102096902292502D10F2A21021B
+:106DF0002B32830A6A022B36822A2502D10F000029
+:106E00006C100418D6EC0C2711087708267286251A
+:106E10003C04765B1315D6E805220A2222A36820DB
+:106E200002742904227285D10FC020D10F00000006
+:106E30006C100419D6EB27221EC08009770208E4E3
+:106E4000311DD6DC0002002CD2821BD6DC003104BE
+:106E5000C06100661A2BB1020C6C022CD6820BE4C6
+:106E60003119D7600C3A11AA9328328297802532C3
+:106E700082243284B45525368275410B2A21020AB8
+:106E80006A022A2502D10F002B21022C32830B6BC0
+:106E9000022C36822B2502D10F0000006C10041B3F
+:106EA000D6C50C2A11ABAA29A286B438798B221B2D
+:106EB000D6C219D6E80B2B0A2BB2A309290868B051
+:106EC0000274B90D299D0129901F6E920822A28596
+:106ED000D10FC020D10FC892C020D10FDA205BEEB5
+:106EE000B3C020D10F0000006C100414D6B22842A9
+:106EF0009E19D6AF6F88026000BA29922668900763
+:106F00008A2009AA0C65A0AC2A429DC0DC64A0A41A
+:106F10002B200C19D6A90CBC11A4CC2EC28609B901
+:106F20000A7ED30260009A2992A36890078D2009F7
+:106F3000DD0C65D08C25C2856450862D2104C030BF
+:106F40006ED80D2C2066B8CC0C0C472C246665C07E
+:106F50007B1CD72518D6AF1AD6A619D6B61DD6AB28
+:106F6000C0E49E519D508F209357935599539A5644
+:106F70009A5408FF021AD6C29F5288269F5A9E59D9
+:106F80009D58935E9C5D935C9A5B08084805881148
+:106F9000985FC0D81FD6900CB911A499289285AFDC
+:106FA000BF23F4CF288C402896858E262D24069E5C
+:106FB00029C020D10FCA33DA20C0B65BFF78C72FB3
+:106FC000D10FC93ADA205BFF75C72FD10FDBD05B39
+:106FD000FE0B2324662B200C63FF7500C72FD10FF7
+:106FE000C72FD10F6C1004C85B29200668941C6859
+:106FF0009607C020D10FC020D10FDA20DB30DC4053
+:10700000DD502E0A005BFE5ED2A0D10F2E200C18A0
+:10701000D6690CEF11A8FF29F286C088798B791AFE
+:10702000D6660AEA0A2AA2A368A0048B207AB96865
+:1070300023F2856430621BD670290A802C206828D0
+:1070400020672D21040B881104DD1108DD020DCC11
+:1070500002C0842D4A100DCC021DD66898319D3097
+:107060008A2B99379C340BAA02C0C09C359C369A57
+:10707000322A2C74DB4028F285C0D3288C2028F6D5
+:10708000852C25042D24061FD653DD40AFEE2CE4BD
+:10709000CF5BFDEAD2A0D10F00DA20DBE05BFF3F3F
+:1070A000C020D10F6C100AD6302A200624160128E1
+:1070B000ACF86583862B2122C0F22A2124CC572AE2
+:1070C000AC010A0A4F2A25247ABB0260037F2C21D7
+:1070D000020C0C4C65C3192E22158D32C0910EDDA9
+:1070E0000C65D39088381ED63364836B8C37C0B858
+:1070F000C0960CB9399914B49A9A120D9911991332
+:107100008F6718D62EC9FB2880217F83168B142CFD
+:1071100022002A200C5BFF61D4A064A3B38F6760B8
+:10712000002800002B200C89120CBA11AEAA2CA248
+:10713000861DD6217C9B3E0DBD0A2DD2A368D004AE
+:1071400088207D893024A28564436427212E07F797
+:107150003607F90C6F9D01D7F0DA20DB70C1C42D22
+:10716000211F5BFEF889268827DDA009880C7A8B11
+:10717000179A10600006C04063FFCC0000DA208B35
+:10718000105BFEC88D1065A267C0E09E488C649CB1
+:10719000498B658A669B4A9A4B97458F677F730236
+:1071A000600120CD529D10DA20DB302C12015BFEF5
+:1071B000698D10C051D6A08FA7C0C08A68974D9A1C
+:1071C0004C8869896A984E994F8E6A8A69AE7E7733
+:1071D000EB01B1AA9E6A9A698B60C0A00B8E1477EE
+:1071E000B701C0A1C091C08493159D179516C0D05A
+:1071F00025203CC030085801089338C0820833105D
+:10720000085B010535400B9D3807DD100BAB100EF8
+:1072100019402A211F07991003DD020DBB020553F7
+:10722000100933020A55112921250A2A14092914A3
+:107230000499110A99020933028A2B2921040BAA05
+:10724000021BD66A0899110955020855020BAA02B9
+:107250009A408920881408991109880219D5EA1DD5
+:10726000D66409880298418B2A9346954783150D69
+:10727000BB0285168D179B448A658966AACAA97CBC
+:1072800077CB01B1AA07FB0C9C669A6588268E29EC
+:10729000AD87972607EE0C0E0E482E25259B672BF3
+:1072A000200C87131ED5C40CB911AE99289285A75E
+:1072B0008828968517D5C8C090A7BB29B4CF871852
+:1072C00063FE3C008C60C0E0C091C0F0C034C0B828
+:1072D0002A210428203C08AA110B8B0103830103F7
+:1072E0009F380B9B39C03208FF10038801089E3875
+:1072F0000C881407EE100FEE020388010898390578
+:10730000BF1029211F0ABB1107881008FF020BAA12
+:107310000218D5BC09291403AA022B212583200BAE
+:107320002B1404BB110833110FBB020B99028B14F1
+:107330008F2A0B33020833028B2B64708688689780
+:107340004D984C8769886A93419946974E984FC0EB
+:107350007077C701C0719A4718D6260B7C100CECC9
+:107360000208F802984418D6230CBC0208CC029CF0
+:10737000402A200C295CFEC0801FD58E1CD5960C9F
+:10738000AE112B2124ACAAAFEEB0BB8F132CE2853B
+:1073900028A4CFAFCC2CE6852A22152B2524B1AA10
+:1073A0002A26156490DBC9D28F262E22090DFF08EC
+:1073B0002F26060FEE0C0E0E482E25256550E4C034
+:1073C00020D10F00C07093419F4499469A4777C7D8
+:1073D0000A1CD57A2CC022C0810C87381CD6070B1A
+:1073E000781008E80208B8020C8802984063FF8011
+:1073F00000CC57DA20DB608C115BFDD629210268B6
+:107400009806689403C020D10F2B221EC0A0292209
+:107410001D2A25027B9901C0B064BFE813D5652CF5
+:10742000B00728B000DA2003880A28824CC0D10BAC
+:107430008000DBA065AFE763FFCA000068A779DAC8
+:1074400020DB30DC40DD505BFEE7D2A0D10FC16D08
+:10745000C19D29252C60000429252CD6902624675F
+:107460002F2468DA20DB308C11DD502E0A805BFD82
+:1074700044D2A0D10FC168C1A82A252C63FFDD002A
+:107480000000C8DF8C268B29ADCC9C260CBB0C0BD6
+:107490000B482B25252A2C74DB602C12015BFD8701
+:1074A000D2A0D10F2A2C748B115BF6B9D2A0D10FC8
+:1074B000DA205BFE3A63FF3800DA20C0B15BFE8A57
+:1074C00064ABF1655F352D2124B1DD2D252463FFEB
+:1074D0001FDA202B200C5BFE5663FF1412D5C882E6
+:1074E00020028257C82163FFFC12D5C403E8300490
+:1074F000EE3005B13093209421952263FFFC00000B
+:1075000010D5C0910092019302940311D597821077
+:1075100001EA30A21101F031C04004E4160002007B
+:1075200011D5B98210234A00032202921011D5828C
+:10753000C021921004E4318403830282018100009F
+:10754000D23001230000000010D5B09100920193C9
+:1075500002940311D586821001EA30A21101F131A3
+:10756000C04004E41600020011D5A7821013D52BE9
+:10757000032202921004E431840383028201810019
+:1075800000D330013300000010D5A19100810165C6
+:10759000104981026510448103CF1F920193029428
+:1075A0000311D574821001EA30A21101F231C040FA
+:1075B00004E41600020011D593821013D5130322A0
+:1075C00002921004E431840383028201C01091030B
+:1075D00091029101810000D43001430012D542C0D4
+:1075E0003028374028374428374828374C233D0176
+:1075F0007233ED03020063FFFC00000010D585919B
+:107600000092019302940311D5838210921011D538
+:10761000348310032202921011D58012D5469210A5
+:10762000C04004E41600020011D577821013D52D56
+:10763000032202921004E431840383028201810058
+:1076400000D53001530000006C10026E322FD6209E
+:10765000056F04043F04745B2A05440C00410400D8
+:10766000331A220A006D490D73630403660CB122BC
+:107670000F2211031314736302222C01D10FC83B94
+:10768000D10F000073630CC021D10F000000000077
+:1076900044495630C020D10F6C10020040046B4C9E
+:1076A00007032318020219D10F020319C020D10FBA
+:1076B0006C100202EA30D10F6C1002CC2503F031BD
+:1076C00060000F006F220503F1316000056F230594
+:1076D00003F231000200D10F6C1002CC2502F03011
+:1076E000D10F00006F220402F130D10F6F2304028A
+:1076F000F230D10FC020D10F6C1002220A20230AD1
+:10770000006D280E28374028374428374828374C42
+:10771000233D01030200D10F6C100202E431D10FAE
+:107720000A004368656C73696F20465720444542E0
+:1077300055473D3020284275696C74204672692097
+:107740004D61792020382031363A30373A333620AF
+:107750005044542032303039206F6E20636C656F96
+:1077600070617472612E6173696364657369676EB9
+:107770006572732E636F6D3A2F686F6D652F666546
+:107780006C69782F772F66775F372E31292C20563A
+:10779000657273696F6E2054337878203030372EDD
+:1077A00030342E3030202D203130303730343030EE
+:0877B000100704000071489469
+:00000001FF
diff --git a/fs/Kconfig b/fs/Kconfig
index 9f7270f36b2..525da2e8f73 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -62,6 +62,16 @@ source "fs/autofs/Kconfig"
 source "fs/autofs4/Kconfig"
 source "fs/fuse/Kconfig"
 
+config CUSE
+	tristate "Character device in Userpace support"
+	depends on FUSE_FS
+	help
+	  This FUSE extension allows character devices to be
+	  implemented in userspace.
+
+	  If you want to develop or use userspace character device
+	  based on CUSE, answer Y or M.
+
 config GENERIC_ACL
 	bool
 	select FS_POSIX_ACL
diff --git a/fs/adfs/adfs.h b/fs/adfs/adfs.h
index e0a85dbeeb8..a6665f37f45 100644
--- a/fs/adfs/adfs.h
+++ b/fs/adfs/adfs.h
@@ -53,6 +53,7 @@ struct adfs_dir_ops {
 	int	(*update)(struct adfs_dir *dir, struct object_info *obj);
 	int	(*create)(struct adfs_dir *dir, struct object_info *obj);
 	int	(*remove)(struct adfs_dir *dir, struct object_info *obj);
+	int	(*sync)(struct adfs_dir *dir);
 	void	(*free)(struct adfs_dir *dir);
 };
 
@@ -90,7 +91,8 @@ extern const struct dentry_operations adfs_dentry_operations;
 extern struct adfs_dir_ops adfs_f_dir_ops;
 extern struct adfs_dir_ops adfs_fplus_dir_ops;
 
-extern int adfs_dir_update(struct super_block *sb, struct object_info *obj);
+extern int adfs_dir_update(struct super_block *sb, struct object_info *obj,
+			   int wait);
 
 /* file.c */
 extern const struct inode_operations adfs_file_inode_operations;
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index e867ccf3724..4d4073447d1 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -83,7 +83,7 @@ out:
 }
 
 int
-adfs_dir_update(struct super_block *sb, struct object_info *obj)
+adfs_dir_update(struct super_block *sb, struct object_info *obj, int wait)
 {
 	int ret = -EINVAL;
 #ifdef CONFIG_ADFS_FS_RW
@@ -106,6 +106,12 @@ adfs_dir_update(struct super_block *sb, struct object_info *obj)
 	ret = ops->update(&dir, obj);
 	write_unlock(&adfs_dir_lock);
 
+	if (wait) {
+		int err = ops->sync(&dir);
+		if (!ret)
+			ret = err;
+	}
+
 	ops->free(&dir);
 out:
 #endif
@@ -199,7 +205,7 @@ const struct file_operations adfs_dir_operations = {
 	.read		= generic_read_dir,
 	.llseek		= generic_file_llseek,
 	.readdir	= adfs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 };
 
 static int
diff --git a/fs/adfs/dir_f.c b/fs/adfs/dir_f.c
index ea7df214692..31df6adf0de 100644
--- a/fs/adfs/dir_f.c
+++ b/fs/adfs/dir_f.c
@@ -437,6 +437,22 @@ bad_dir:
 #endif
 }
 
+static int
+adfs_f_sync(struct adfs_dir *dir)
+{
+	int err = 0;
+	int i;
+
+	for (i = dir->nr_buffers - 1; i >= 0; i--) {
+		struct buffer_head *bh = dir->bh[i];
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			err = -EIO;
+	}
+
+	return err;
+}
+
 static void
 adfs_f_free(struct adfs_dir *dir)
 {
@@ -456,5 +472,6 @@ struct adfs_dir_ops adfs_f_dir_ops = {
 	.setpos		= adfs_f_setpos,
 	.getnext	= adfs_f_getnext,
 	.update		= adfs_f_update,
+	.sync		= adfs_f_sync,
 	.free		= adfs_f_free
 };
diff --git a/fs/adfs/dir_fplus.c b/fs/adfs/dir_fplus.c
index 1ec644e32df..139e0f345f1 100644
--- a/fs/adfs/dir_fplus.c
+++ b/fs/adfs/dir_fplus.c
@@ -161,6 +161,22 @@ out:
 	return ret;
 }
 
+static int
+adfs_fplus_sync(struct adfs_dir *dir)
+{
+	int err = 0;
+	int i;
+
+	for (i = dir->nr_buffers - 1; i >= 0; i--) {
+		struct buffer_head *bh = dir->bh[i];
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			err = -EIO;
+	}
+
+	return err;
+}
+
 static void
 adfs_fplus_free(struct adfs_dir *dir)
 {
@@ -175,5 +191,6 @@ struct adfs_dir_ops adfs_fplus_dir_ops = {
 	.read		= adfs_fplus_read,
 	.setpos		= adfs_fplus_setpos,
 	.getnext	= adfs_fplus_getnext,
+	.sync		= adfs_fplus_sync,
 	.free		= adfs_fplus_free
 };
diff --git a/fs/adfs/file.c b/fs/adfs/file.c
index 36e381c6a99..8224d54a2af 100644
--- a/fs/adfs/file.c
+++ b/fs/adfs/file.c
@@ -30,7 +30,7 @@ const struct file_operations adfs_file_operations = {
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
 	.mmap		= generic_file_mmap,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
 	.splice_read	= generic_file_splice_read,
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index e647200262a..05b3a677201 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -376,7 +376,7 @@ out:
  * The adfs-specific inode data has already been updated by
  * adfs_notify_change()
  */
-int adfs_write_inode(struct inode *inode, int unused)
+int adfs_write_inode(struct inode *inode, int wait)
 {
 	struct super_block *sb = inode->i_sb;
 	struct object_info obj;
@@ -391,7 +391,7 @@ int adfs_write_inode(struct inode *inode, int unused)
 	obj.attr	= ADFS_I(inode)->attr;
 	obj.size	= inode->i_size;
 
-	ret = adfs_dir_update(sb, &obj);
+	ret = adfs_dir_update(sb, &obj, wait);
 	unlock_kernel();
 	return ret;
 }
diff --git a/fs/adfs/map.c b/fs/adfs/map.c
index 92ab4fbc203..568081b93f7 100644
--- a/fs/adfs/map.c
+++ b/fs/adfs/map.c
@@ -62,7 +62,7 @@ static DEFINE_RWLOCK(adfs_map_lock);
 #define GET_FRAG_ID(_map,_start,_idmask)				\
 	({								\
 		unsigned char *_m = _map + (_start >> 3);		\
-		u32 _frag = get_unaligned((u32 *)_m);			\
+		u32 _frag = get_unaligned_le32(_m);			\
 		_frag >>= (_start & 7);					\
 		_frag & _idmask;					\
 	})
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index dd9becca424..0ec5aaf47aa 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -132,11 +132,15 @@ static void adfs_put_super(struct super_block *sb)
 	int i;
 	struct adfs_sb_info *asb = ADFS_SB(sb);
 
+	lock_kernel();
+
 	for (i = 0; i < asb->s_map_size; i++)
 		brelse(asb->s_map[i].dm_bh);
 	kfree(asb->s_map);
 	kfree(asb);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int adfs_show_options(struct seq_file *seq, struct vfsmount *mnt)
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 1a2d5e3c7f4..e511dc621a2 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -182,6 +182,7 @@ extern int			 affs_add_entry(struct inode *dir, struct inode *inode, struct dent
 
 void		affs_free_prealloc(struct inode *inode);
 extern void	affs_truncate(struct inode *);
+int		affs_file_fsync(struct file *, struct dentry *, int);
 
 /* dir.c */
 
diff --git a/fs/affs/dir.c b/fs/affs/dir.c
index 7b36904dbea..8ca8f3a5559 100644
--- a/fs/affs/dir.c
+++ b/fs/affs/dir.c
@@ -21,7 +21,7 @@ const struct file_operations affs_dir_operations = {
 	.read		= generic_read_dir,
 	.llseek		= generic_file_llseek,
 	.readdir	= affs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= affs_file_fsync,
 };
 
 /*
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 9246cb4aa01..184e55c1c9b 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -34,7 +34,7 @@ const struct file_operations affs_file_operations = {
 	.mmap		= generic_file_mmap,
 	.open		= affs_file_open,
 	.release	= affs_file_release,
-	.fsync		= file_fsync,
+	.fsync		= affs_file_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -915,3 +915,15 @@ affs_truncate(struct inode *inode)
 	}
 	affs_free_prealloc(inode);
 }
+
+int affs_file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+{
+	struct inode * inode = dentry->d_inode;
+	int ret, err;
+
+	ret = write_inode_now(inode, 0);
+	err = sync_blockdev(inode->i_sb->s_bdev);
+	if (!ret)
+		ret = err;
+	return ret;
+}
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 63f5183f263..104fdcb3a7f 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -16,6 +16,7 @@
 #include <linux/parser.h>
 #include <linux/magic.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include "affs.h"
 
 extern struct timezone sys_tz;
@@ -24,49 +25,67 @@ static int affs_statfs(struct dentry *dentry, struct kstatfs *buf);
 static int affs_remount (struct super_block *sb, int *flags, char *data);
 
 static void
+affs_commit_super(struct super_block *sb, int clean)
+{
+	struct affs_sb_info *sbi = AFFS_SB(sb);
+	struct buffer_head *bh = sbi->s_root_bh;
+	struct affs_root_tail *tail = AFFS_ROOT_TAIL(sb, bh);
+
+	tail->bm_flag = cpu_to_be32(clean);
+	secs_to_datestamp(get_seconds(), &tail->disk_change);
+	affs_fix_checksum(sb, bh);
+	mark_buffer_dirty(bh);
+}
+
+static void
 affs_put_super(struct super_block *sb)
 {
 	struct affs_sb_info *sbi = AFFS_SB(sb);
 	pr_debug("AFFS: put_super()\n");
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->bm_flag = cpu_to_be32(1);
-		secs_to_datestamp(get_seconds(),
-				  &AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->disk_change);
-		affs_fix_checksum(sb, sbi->s_root_bh);
-		mark_buffer_dirty(sbi->s_root_bh);
-	}
+	lock_kernel();
+
+	if (!(sb->s_flags & MS_RDONLY))
+		affs_commit_super(sb, 1);
 
 	kfree(sbi->s_prefix);
 	affs_free_bitmap(sb);
 	affs_brelse(sbi->s_root_bh);
 	kfree(sbi);
 	sb->s_fs_info = NULL;
-	return;
+
+	unlock_kernel();
 }
 
 static void
 affs_write_super(struct super_block *sb)
 {
 	int clean = 2;
-	struct affs_sb_info *sbi = AFFS_SB(sb);
 
+	lock_super(sb);
 	if (!(sb->s_flags & MS_RDONLY)) {
 		//	if (sbi->s_bitmap[i].bm_bh) {
 		//		if (buffer_dirty(sbi->s_bitmap[i].bm_bh)) {
 		//			clean = 0;
-		AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->bm_flag = cpu_to_be32(clean);
-		secs_to_datestamp(get_seconds(),
-				  &AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->disk_change);
-		affs_fix_checksum(sb, sbi->s_root_bh);
-		mark_buffer_dirty(sbi->s_root_bh);
+		affs_commit_super(sb, clean);
 		sb->s_dirt = !clean;	/* redo until bitmap synced */
 	} else
 		sb->s_dirt = 0;
+	unlock_super(sb);
 
 	pr_debug("AFFS: write_super() at %lu, clean=%d\n", get_seconds(), clean);
 }
 
+static int
+affs_sync_fs(struct super_block *sb, int wait)
+{
+	lock_super(sb);
+	affs_commit_super(sb, 2);
+	sb->s_dirt = 0;
+	unlock_super(sb);
+	return 0;
+}
+
 static struct kmem_cache * affs_inode_cachep;
 
 static struct inode *affs_alloc_inode(struct super_block *sb)
@@ -124,6 +143,7 @@ static const struct super_operations affs_sops = {
 	.clear_inode	= affs_clear_inode,
 	.put_super	= affs_put_super,
 	.write_super	= affs_write_super,
+	.sync_fs	= affs_sync_fs,
 	.statfs		= affs_statfs,
 	.remount_fs	= affs_remount,
 	.show_options	= generic_show_options,
@@ -507,6 +527,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 		kfree(new_opts);
 		return -EINVAL;
 	}
+	lock_kernel();
 	replace_mount_options(sb, new_opts);
 
 	sbi->s_flags = mount_flags;
@@ -514,8 +535,10 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 	sbi->s_uid   = uid;
 	sbi->s_gid   = gid;
 
-	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
+		unlock_kernel();
 		return 0;
+	}
 	if (*flags & MS_RDONLY) {
 		sb->s_dirt = 1;
 		while (sb->s_dirt)
@@ -524,6 +547,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 	} else
 		res = affs_init_bitmap(sb, flags);
 
+	unlock_kernel();
 	return res;
 }
 
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 2b9e2d03a39..c52be53f694 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -244,7 +244,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
 	case -EBUSY:
 		/* someone else made a mount here whilst we were busy */
 		while (d_mountpoint(nd->path.dentry) &&
-		       follow_down(&nd->path.mnt, &nd->path.dentry))
+		       follow_down(&nd->path))
 			;
 		err = 0;
 	default:
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 76828e5f8a3..ad0514d0115 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -440,8 +440,12 @@ static void afs_put_super(struct super_block *sb)
 
 	_enter("");
 
+	lock_kernel();
+
 	afs_put_volume(as->volume);
 
+	unlock_kernel();
+
 	_leave("");
 }
 
diff --git a/fs/autofs/dirhash.c b/fs/autofs/dirhash.c
index 4eb4d8dfb2f..2316e944a10 100644
--- a/fs/autofs/dirhash.c
+++ b/fs/autofs/dirhash.c
@@ -85,13 +85,12 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb,
 		}
 		path.mnt = mnt;
 		path_get(&path);
-		if (!follow_down(&path.mnt, &path.dentry)) {
+		if (!follow_down(&path)) {
 			path_put(&path);
 			DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
 			continue;
 		}
-		while (d_mountpoint(path.dentry) &&
-		       follow_down(&path.mnt, &path.dentry))
+		while (d_mountpoint(path.dentry) && follow_down(&path));
 			;
 		umount_ok = may_umount(path.mnt);
 		path_put(&path);
diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index b7ff33c6310..8f7cdde4173 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -223,12 +223,12 @@ int autofs4_wait(struct autofs_sb_info *,struct dentry *, enum autofs_notify);
 int autofs4_wait_release(struct autofs_sb_info *,autofs_wqt_t,int);
 void autofs4_catatonic_mode(struct autofs_sb_info *);
 
-static inline int autofs4_follow_mount(struct vfsmount **mnt, struct dentry **dentry)
+static inline int autofs4_follow_mount(struct path *path)
 {
 	int res = 0;
 
-	while (d_mountpoint(*dentry)) {
-		int followed = follow_down(mnt, dentry);
+	while (d_mountpoint(path->dentry)) {
+		int followed = follow_down(path);
 		if (!followed)
 			break;
 		res = 1;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 84168c0dcc2..f3da2eb51f5 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -192,77 +192,42 @@ static int autofs_dev_ioctl_protosubver(struct file *fp,
 	return 0;
 }
 
-/*
- * Walk down the mount stack looking for an autofs mount that
- * has the requested device number (aka. new_encode_dev(sb->s_dev).
- */
-static int autofs_dev_ioctl_find_super(struct nameidata *nd, dev_t devno)
+static int find_autofs_mount(const char *pathname,
+			     struct path *res,
+			     int test(struct path *path, void *data),
+			     void *data)
 {
-	struct dentry *dentry;
-	struct inode *inode;
-	struct super_block *sb;
-	dev_t s_dev;
-	unsigned int err;
-
+	struct path path;
+	int err = kern_path(pathname, 0, &path);
+	if (err)
+		return err;
 	err = -ENOENT;
-
-	/* Lookup the dentry name at the base of our mount point */
-	dentry = d_lookup(nd->path.dentry, &nd->last);
-	if (!dentry)
-		goto out;
-
-	dput(nd->path.dentry);
-	nd->path.dentry = dentry;
-
-	/* And follow the mount stack looking for our autofs mount */
-	while (follow_down(&nd->path.mnt, &nd->path.dentry)) {
-		inode = nd->path.dentry->d_inode;
-		if (!inode)
-			break;
-
-		sb = inode->i_sb;
-		s_dev = new_encode_dev(sb->s_dev);
-		if (devno == s_dev) {
-			if (sb->s_magic == AUTOFS_SUPER_MAGIC) {
+	while (path.dentry == path.mnt->mnt_root) {
+		if (path.mnt->mnt_sb->s_magic == AUTOFS_SUPER_MAGIC) {
+			if (test(&path, data)) {
+				path_get(&path);
+				if (!err) /* already found some */
+					path_put(res);
+				*res = path;
 				err = 0;
-				break;
 			}
 		}
+		if (!follow_up(&path))
+			break;
 	}
-out:
+	path_put(&path);
 	return err;
 }
 
-/*
- * Walk down the mount stack looking for an autofs mount that
- * has the requested mount type (ie. indirect, direct or offset).
- */
-static int autofs_dev_ioctl_find_sbi_type(struct nameidata *nd, unsigned int type)
+static int test_by_dev(struct path *path, void *p)
 {
-	struct dentry *dentry;
-	struct autofs_info *ino;
-	unsigned int err;
-
-	err = -ENOENT;
-
-	/* Lookup the dentry name at the base of our mount point */
-	dentry = d_lookup(nd->path.dentry, &nd->last);
-	if (!dentry)
-		goto out;
-
-	dput(nd->path.dentry);
-	nd->path.dentry = dentry;
+	return path->mnt->mnt_sb->s_dev == *(dev_t *)p;
+}
 
-	/* And follow the mount stack looking for our autofs mount */
-	while (follow_down(&nd->path.mnt, &nd->path.dentry)) {
-		ino = autofs4_dentry_ino(nd->path.dentry);
-		if (ino && ino->sbi->type & type) {
-			err = 0;
-			break;
-		}
-	}
-out:
-	return err;
+static int test_by_type(struct path *path, void *p)
+{
+	struct autofs_info *ino = autofs4_dentry_ino(path->dentry);
+	return ino && ino->sbi->type & *(unsigned *)p;
 }
 
 static void autofs_dev_ioctl_fd_install(unsigned int fd, struct file *file)
@@ -283,31 +248,25 @@ static void autofs_dev_ioctl_fd_install(unsigned int fd, struct file *file)
  * Open a file descriptor on the autofs mount point corresponding
  * to the given path and device number (aka. new_encode_dev(sb->s_dev)).
  */
-static int autofs_dev_ioctl_open_mountpoint(const char *path, dev_t devid)
+static int autofs_dev_ioctl_open_mountpoint(const char *name, dev_t devid)
 {
-	struct file *filp;
-	struct nameidata nd;
 	int err, fd;
 
 	fd = get_unused_fd();
 	if (likely(fd >= 0)) {
-		/* Get nameidata of the parent directory */
-		err = path_lookup(path, LOOKUP_PARENT, &nd);
+		struct file *filp;
+		struct path path;
+
+		err = find_autofs_mount(name, &path, test_by_dev, &devid);
 		if (err)
 			goto out;
 
 		/*
-		 * Search down, within the parent, looking for an
-		 * autofs super block that has the device number
+		 * Find autofs super block that has the device number
 		 * corresponding to the autofs fs we want to open.
 		 */
-		err = autofs_dev_ioctl_find_super(&nd, devid);
-		if (err) {
-			path_put(&nd.path);
-			goto out;
-		}
 
-		filp = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
+		filp = dentry_open(path.dentry, path.mnt, O_RDONLY,
 				   current_cred());
 		if (IS_ERR(filp)) {
 			err = PTR_ERR(filp);
@@ -340,7 +299,7 @@ static int autofs_dev_ioctl_openmount(struct file *fp,
 	param->ioctlfd = -1;
 
 	path = param->path;
-	devid = param->openmount.devid;
+	devid = new_decode_dev(param->openmount.devid);
 
 	err = 0;
 	fd = autofs_dev_ioctl_open_mountpoint(path, devid);
@@ -475,8 +434,7 @@ static int autofs_dev_ioctl_requester(struct file *fp,
 				      struct autofs_dev_ioctl *param)
 {
 	struct autofs_info *ino;
-	struct nameidata nd;
-	const char *path;
+	struct path path;
 	dev_t devid;
 	int err = -ENOENT;
 
@@ -485,32 +443,24 @@ static int autofs_dev_ioctl_requester(struct file *fp,
 		goto out;
 	}
 
-	path = param->path;
-	devid = new_encode_dev(sbi->sb->s_dev);
+	devid = sbi->sb->s_dev;
 
 	param->requester.uid = param->requester.gid = -1;
 
-	/* Get nameidata of the parent directory */
-	err = path_lookup(path, LOOKUP_PARENT, &nd);
+	err = find_autofs_mount(param->path, &path, test_by_dev, &devid);
 	if (err)
 		goto out;
 
-	err = autofs_dev_ioctl_find_super(&nd, devid);
-	if (err)
-		goto out_release;
-
-	ino = autofs4_dentry_ino(nd.path.dentry);
+	ino = autofs4_dentry_ino(path.dentry);
 	if (ino) {
 		err = 0;
-		autofs4_expire_wait(nd.path.dentry);
+		autofs4_expire_wait(path.dentry);
 		spin_lock(&sbi->fs_lock);
 		param->requester.uid = ino->uid;
 		param->requester.gid = ino->gid;
 		spin_unlock(&sbi->fs_lock);
 	}
-
-out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return err;
 }
@@ -569,8 +519,8 @@ static int autofs_dev_ioctl_ismountpoint(struct file *fp,
 					 struct autofs_sb_info *sbi,
 					 struct autofs_dev_ioctl *param)
 {
-	struct nameidata nd;
-	const char *path;
+	struct path path;
+	const char *name;
 	unsigned int type;
 	unsigned int devid, magic;
 	int err = -ENOENT;
@@ -580,71 +530,46 @@ static int autofs_dev_ioctl_ismountpoint(struct file *fp,
 		goto out;
 	}
 
-	path = param->path;
+	name = param->path;
 	type = param->ismountpoint.in.type;
 
 	param->ismountpoint.out.devid = devid = 0;
 	param->ismountpoint.out.magic = magic = 0;
 
 	if (!fp || param->ioctlfd == -1) {
-		if (autofs_type_any(type)) {
-			struct super_block *sb;
-
-			err = path_lookup(path, LOOKUP_FOLLOW, &nd);
-			if (err)
-				goto out;
-
-			sb = nd.path.dentry->d_sb;
-			devid = new_encode_dev(sb->s_dev);
-		} else {
-			struct autofs_info *ino;
-
-			err = path_lookup(path, LOOKUP_PARENT, &nd);
-			if (err)
-				goto out;
-
-			err = autofs_dev_ioctl_find_sbi_type(&nd, type);
-			if (err)
-				goto out_release;
-
-			ino = autofs4_dentry_ino(nd.path.dentry);
-			devid = autofs4_get_dev(ino->sbi);
-		}
-
+		if (autofs_type_any(type))
+			err = kern_path(name, LOOKUP_FOLLOW, &path);
+		else
+			err = find_autofs_mount(name, &path, test_by_type, &type);
+		if (err)
+			goto out;
+		devid = new_encode_dev(path.mnt->mnt_sb->s_dev);
 		err = 0;
-		if (nd.path.dentry->d_inode &&
-		    nd.path.mnt->mnt_root == nd.path.dentry) {
+		if (path.dentry->d_inode &&
+		    path.mnt->mnt_root == path.dentry) {
 			err = 1;
-			magic = nd.path.dentry->d_inode->i_sb->s_magic;
+			magic = path.dentry->d_inode->i_sb->s_magic;
 		}
 	} else {
-		dev_t dev = autofs4_get_dev(sbi);
+		dev_t dev = sbi->sb->s_dev;
 
-		err = path_lookup(path, LOOKUP_PARENT, &nd);
+		err = find_autofs_mount(name, &path, test_by_dev, &dev);
 		if (err)
 			goto out;
 
-		err = autofs_dev_ioctl_find_super(&nd, dev);
-		if (err)
-			goto out_release;
-
-		devid = dev;
+		devid = new_encode_dev(dev);
 
-		err = have_submounts(nd.path.dentry);
+		err = have_submounts(path.dentry);
 
-		if (nd.path.mnt->mnt_mountpoint != nd.path.mnt->mnt_root) {
-			if (follow_down(&nd.path.mnt, &nd.path.dentry)) {
-				struct inode *inode = nd.path.dentry->d_inode;
-				magic = inode->i_sb->s_magic;
-			}
+		if (path.mnt->mnt_mountpoint != path.mnt->mnt_root) {
+			if (follow_down(&path))
+				magic = path.mnt->mnt_sb->s_magic;
 		}
 	}
 
 	param->ismountpoint.out.devid = devid;
 	param->ismountpoint.out.magic = magic;
-
-out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return err;
 }
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 3077d8f1652..aa39ae83f01 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -48,19 +48,19 @@ static inline int autofs4_can_expire(struct dentry *dentry,
 static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 {
 	struct dentry *top = dentry;
+	struct path path = {.mnt = mnt, .dentry = dentry};
 	int status = 1;
 
 	DPRINTK("dentry %p %.*s",
 		dentry, (int)dentry->d_name.len, dentry->d_name.name);
 
-	mntget(mnt);
-	dget(dentry);
+	path_get(&path);
 
-	if (!follow_down(&mnt, &dentry))
+	if (!follow_down(&path))
 		goto done;
 
-	if (is_autofs4_dentry(dentry)) {
-		struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	if (is_autofs4_dentry(path.dentry)) {
+		struct autofs_sb_info *sbi = autofs4_sbi(path.dentry->d_sb);
 
 		/* This is an autofs submount, we can't expire it */
 		if (autofs_type_indirect(sbi->type))
@@ -70,7 +70,7 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 		 * Otherwise it's an offset mount and we need to check
 		 * if we can umount its mount, if there is one.
 		 */
-		if (!d_mountpoint(dentry)) {
+		if (!d_mountpoint(path.dentry)) {
 			status = 0;
 			goto done;
 		}
@@ -86,8 +86,7 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 	status = 0;
 done:
 	DPRINTK("returning = %d", status);
-	dput(dentry);
-	mntput(mnt);
+	path_put(&path);
 	return status;
 }
 
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index e383bf0334f..b96a3c57359 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -181,7 +181,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 		nd->flags);
 	/*
 	 * For an expire of a covered direct or offset mount we need
-	 * to beeak out of follow_down() at the autofs mount trigger
+	 * to break out of follow_down() at the autofs mount trigger
 	 * (d_mounted--), so we can see the expiring flag, and manage
 	 * the blocking and following here until the expire is completed.
 	 */
@@ -190,7 +190,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 		if (ino->flags & AUTOFS_INF_EXPIRING) {
 			spin_unlock(&sbi->fs_lock);
 			/* Follow down to our covering mount. */
-			if (!follow_down(&nd->path.mnt, &nd->path.dentry))
+			if (!follow_down(&nd->path))
 				goto done;
 			goto follow;
 		}
@@ -230,8 +230,7 @@ follow:
 	 * to follow it.
 	 */
 	if (d_mountpoint(dentry)) {
-		if (!autofs4_follow_mount(&nd->path.mnt,
-					  &nd->path.dentry)) {
+		if (!autofs4_follow_mount(&nd->path)) {
 			status = -ENOENT;
 			goto out_error;
 		}
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 76afd0d6b86..9367b6297d8 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -737,6 +737,8 @@ parse_options(char *options, befs_mount_options * opts)
 static void
 befs_put_super(struct super_block *sb)
 {
+	lock_kernel();
+
 	kfree(BEFS_SB(sb)->mount_opts.iocharset);
 	BEFS_SB(sb)->mount_opts.iocharset = NULL;
 
@@ -747,7 +749,8 @@ befs_put_super(struct super_block *sb)
 
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
-	return;
+
+	unlock_kernel();
 }
 
 /* Allocate private field of the superblock, fill it.
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 4dd1b623f93..54bd07d44e6 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -79,7 +79,7 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 const struct file_operations bfs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= bfs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 	.llseek		= generic_file_llseek,
 };
 
@@ -205,7 +205,7 @@ static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 		inode->i_nlink = 1;
 	}
 	de->ino = 0;
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
 	mark_inode_dirty(dir);
 	inode->i_ctime = dir->i_ctime;
@@ -267,7 +267,7 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		new_inode->i_ctime = CURRENT_TIME_SEC;
 		inode_dec_link_count(new_inode);
 	}
-	mark_buffer_dirty(old_bh);
+	mark_buffer_dirty_inode(old_bh, old_dir);
 	error = 0;
 
 end_rename:
@@ -320,7 +320,7 @@ static int bfs_add_entry(struct inode *dir, const unsigned char *name,
 				for (i = 0; i < BFS_NAMELEN; i++)
 					de->name[i] =
 						(i < namelen) ? name[i] : 0;
-				mark_buffer_dirty(bh);
+				mark_buffer_dirty_inode(bh, dir);
 				brelse(bh);
 				return 0;
 			}
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index cc4062d12ca..6f60336c662 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -30,6 +30,7 @@ MODULE_LICENSE("GPL");
 #define dprintf(x...)
 #endif
 
+static void bfs_write_super(struct super_block *s);
 void dump_imap(const char *prefix, struct super_block *s);
 
 struct inode *bfs_iget(struct super_block *sb, unsigned long ino)
@@ -97,14 +98,15 @@ error:
 	return ERR_PTR(-EIO);
 }
 
-static int bfs_write_inode(struct inode *inode, int unused)
+static int bfs_write_inode(struct inode *inode, int wait)
 {
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 	unsigned int ino = (u16)inode->i_ino;
         unsigned long i_sblock;
 	struct bfs_inode *di;
 	struct buffer_head *bh;
 	int block, off;
-	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
+	int err = 0;
 
         dprintf("ino=%08x\n", ino);
 
@@ -145,9 +147,14 @@ static int bfs_write_inode(struct inode *inode, int unused)
 	di->i_eoffset = cpu_to_le32(i_sblock * BFS_BSIZE + inode->i_size - 1);
 
 	mark_buffer_dirty(bh);
+	if (wait) {
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			err = -EIO;
+	}
 	brelse(bh);
 	mutex_unlock(&info->bfs_lock);
-	return 0;
+	return err;
 }
 
 static void bfs_delete_inode(struct inode *inode)
@@ -209,6 +216,26 @@ static void bfs_delete_inode(struct inode *inode)
 	clear_inode(inode);
 }
 
+static int bfs_sync_fs(struct super_block *sb, int wait)
+{
+	struct bfs_sb_info *info = BFS_SB(sb);
+
+	mutex_lock(&info->bfs_lock);
+	mark_buffer_dirty(info->si_sbh);
+	sb->s_dirt = 0;
+	mutex_unlock(&info->bfs_lock);
+
+	return 0;
+}
+
+static void bfs_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		bfs_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
+}
+
 static void bfs_put_super(struct super_block *s)
 {
 	struct bfs_sb_info *info = BFS_SB(s);
@@ -216,11 +243,18 @@ static void bfs_put_super(struct super_block *s)
 	if (!info)
 		return;
 
+	lock_kernel();
+
+	if (s->s_dirt)
+		bfs_write_super(s);
+
 	brelse(info->si_sbh);
 	mutex_destroy(&info->bfs_lock);
 	kfree(info->si_imap);
 	kfree(info);
 	s->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -240,17 +274,6 @@ static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	return 0;
 }
 
-static void bfs_write_super(struct super_block *s)
-{
-	struct bfs_sb_info *info = BFS_SB(s);
-
-	mutex_lock(&info->bfs_lock);
-	if (!(s->s_flags & MS_RDONLY))
-		mark_buffer_dirty(info->si_sbh);
-	s->s_dirt = 0;
-	mutex_unlock(&info->bfs_lock);
-}
-
 static struct kmem_cache *bfs_inode_cachep;
 
 static struct inode *bfs_alloc_inode(struct super_block *sb)
@@ -298,6 +321,7 @@ static const struct super_operations bfs_sops = {
 	.delete_inode	= bfs_delete_inode,
 	.put_super	= bfs_put_super,
 	.write_super	= bfs_write_super,
+	.sync_fs	= bfs_sync_fs,
 	.statfs		= bfs_statfs,
 };
 
diff --git a/fs/bio.c b/fs/bio.c
index 59000215e59..24c91404353 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/mempool.h>
 #include <linux/workqueue.h>
-#include <linux/blktrace_api.h>
 #include <scsi/sg.h>		/* for struct sg_iovec */
 
 #include <trace/events/block.h>
@@ -358,9 +357,9 @@ static void bio_kmalloc_destructor(struct bio *bio)
  *
  *   If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
  *   a bio. This is due to the mempool guarantees. To make this work, callers
- *   must never allocate more than 1 bio at the time from this pool. Callers
+ *   must never allocate more than 1 bio at a time from this pool. Callers
  *   that need to allocate more than 1 bio must always submit the previously
- *   allocate bio for IO before attempting to allocate a new one. Failure to
+ *   allocated bio for IO before attempting to allocate a new one. Failure to
  *   do so can cause livelocks under memory pressure.
  *
  **/
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 931f6b8c4b2..3a6d4fb2a32 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -176,17 +176,22 @@ blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
 				iov, offset, nr_segs, blkdev_get_blocks, NULL);
 }
 
+int __sync_blockdev(struct block_device *bdev, int wait)
+{
+	if (!bdev)
+		return 0;
+	if (!wait)
+		return filemap_flush(bdev->bd_inode->i_mapping);
+	return filemap_write_and_wait(bdev->bd_inode->i_mapping);
+}
+
 /*
  * Write out and wait upon all the dirty data associated with a block
  * device via its mapping.  Does not take the superblock lock.
  */
 int sync_blockdev(struct block_device *bdev)
 {
-	int ret = 0;
-
-	if (bdev)
-		ret = filemap_write_and_wait(bdev->bd_inode->i_mapping);
-	return ret;
+	return __sync_blockdev(bdev, 1);
 }
 EXPORT_SYMBOL(sync_blockdev);
 
@@ -199,7 +204,7 @@ int fsync_bdev(struct block_device *bdev)
 {
 	struct super_block *sb = get_super(bdev);
 	if (sb) {
-		int res = fsync_super(sb);
+		int res = sync_filesystem(sb);
 		drop_super(sb);
 		return res;
 	}
@@ -241,7 +246,7 @@ struct super_block *freeze_bdev(struct block_device *bdev)
 		sb->s_frozen = SB_FREEZE_WRITE;
 		smp_wmb();
 
-		__fsync_super(sb);
+		sync_filesystem(sb);
 
 		sb->s_frozen = SB_FREEZE_TRANS;
 		smp_wmb();
diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile
index 94212844a9b..a35eb36b32f 100644
--- a/fs/btrfs/Makefile
+++ b/fs/btrfs/Makefile
@@ -6,5 +6,5 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
 	   transaction.o inode.o file.o tree-defrag.o \
 	   extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
 	   extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
-	   ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \
-	   compression.o delayed-ref.o
+	   export.o tree-log.o acl.o free-space-cache.o zlib.o \
+	   compression.o delayed-ref.o relocation.o
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index cbba000dccb..603972576f0 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -351,9 +351,4 @@ int btrfs_init_acl(struct inode *inode, struct inode *dir)
 	return 0;
 }
 
-int btrfs_check_acl(struct inode *inode, int mask)
-{
-	return 0;
-}
-
 #endif /* CONFIG_FS_POSIX_ACL */
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 502c3d61de6..7f88628a1a7 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -294,10 +294,10 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
 		INIT_LIST_HEAD(&worker->worker_list);
 		spin_lock_init(&worker->lock);
 		atomic_set(&worker->num_pending, 0);
+		worker->workers = workers;
 		worker->task = kthread_run(worker_loop, worker,
 					   "btrfs-%s-%d", workers->name,
 					   workers->num_workers + i);
-		worker->workers = workers;
 		if (IS_ERR(worker->task)) {
 			kfree(worker);
 			ret = PTR_ERR(worker->task);
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index b30986f00b9..acb4f351758 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -72,6 +72,9 @@ struct btrfs_inode {
 	 */
 	struct list_head ordered_operations;
 
+	/* node for the red-black tree that links inodes in subvolume root */
+	struct rb_node rb_node;
+
 	/* the space_info for where this inode's data allocations are done */
 	struct btrfs_space_info *space_info;
 
@@ -154,5 +157,4 @@ static inline void btrfs_i_size_write(struct inode *inode, u64 size)
 	BTRFS_I(inode)->disk_i_size = size;
 }
 
-
 #endif
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index ab07627084f..de1e2fd3208 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -123,7 +123,7 @@ static int check_compressed_csum(struct inode *inode,
 	u32 csum;
 	u32 *cb_sum = &cb->sums;
 
-	if (btrfs_test_flag(inode, NODATASUM))
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
 		return 0;
 
 	for (i = 0; i < cb->nr_pages; i++) {
@@ -670,7 +670,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
 			 */
 			atomic_inc(&cb->pending_bios);
 
-			if (!btrfs_test_flag(inode, NODATASUM)) {
+			if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) {
 				btrfs_lookup_bio_sums(root, inode, comp_bio,
 						      sums);
 			}
@@ -697,7 +697,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
 	ret = btrfs_bio_wq_end_io(root->fs_info, comp_bio, 0);
 	BUG_ON(ret);
 
-	if (!btrfs_test_flag(inode, NODATASUM))
+	if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM))
 		btrfs_lookup_bio_sums(root, inode, comp_bio, sums);
 
 	ret = btrfs_map_bio(root, READ, comp_bio, mirror_num, 0);
diff --git a/fs/btrfs/crc32c.h b/fs/btrfs/crc32c.h
deleted file mode 100644
index 6e1b3de3670..00000000000
--- a/fs/btrfs/crc32c.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2008 Oracle.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License v2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- */
-
-#ifndef __BTRFS_CRC32C__
-#define __BTRFS_CRC32C__
-#include <linux/crc32c.h>
-
-/*
- * this file used to do more for selecting the HW version of crc32c,
- * perhaps it will one day again soon.
- */
-#define btrfs_crc32c(seed, data, length) crc32c(seed, data, length)
-#endif
-
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index fedf8b9f03a..60a45f3a4e9 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -197,14 +197,7 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 	u32 nritems;
 	int ret = 0;
 	int level;
-	struct btrfs_root *new_root;
-
-	new_root = kmalloc(sizeof(*new_root), GFP_NOFS);
-	if (!new_root)
-		return -ENOMEM;
-
-	memcpy(new_root, root, sizeof(*new_root));
-	new_root->root_key.objectid = new_root_objectid;
+	struct btrfs_disk_key disk_key;
 
 	WARN_ON(root->ref_cows && trans->transid !=
 		root->fs_info->running_transaction->transid);
@@ -212,28 +205,37 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 
 	level = btrfs_header_level(buf);
 	nritems = btrfs_header_nritems(buf);
+	if (level == 0)
+		btrfs_item_key(buf, &disk_key, 0);
+	else
+		btrfs_node_key(buf, &disk_key, 0);
 
-	cow = btrfs_alloc_free_block(trans, new_root, buf->len, 0,
-				     new_root_objectid, trans->transid,
-				     level, buf->start, 0);
-	if (IS_ERR(cow)) {
-		kfree(new_root);
+	cow = btrfs_alloc_free_block(trans, root, buf->len, 0,
+				     new_root_objectid, &disk_key, level,
+				     buf->start, 0);
+	if (IS_ERR(cow))
 		return PTR_ERR(cow);
-	}
 
 	copy_extent_buffer(cow, buf, 0, 0, cow->len);
 	btrfs_set_header_bytenr(cow, cow->start);
 	btrfs_set_header_generation(cow, trans->transid);
-	btrfs_set_header_owner(cow, new_root_objectid);
-	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN);
+	btrfs_set_header_backref_rev(cow, BTRFS_MIXED_BACKREF_REV);
+	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN |
+				     BTRFS_HEADER_FLAG_RELOC);
+	if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
+		btrfs_set_header_flag(cow, BTRFS_HEADER_FLAG_RELOC);
+	else
+		btrfs_set_header_owner(cow, new_root_objectid);
 
 	write_extent_buffer(cow, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(cow),
 			    BTRFS_FSID_SIZE);
 
 	WARN_ON(btrfs_header_generation(buf) > trans->transid);
-	ret = btrfs_inc_ref(trans, new_root, buf, cow, NULL);
-	kfree(new_root);
+	if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
+		ret = btrfs_inc_ref(trans, root, cow, 1);
+	else
+		ret = btrfs_inc_ref(trans, root, cow, 0);
 
 	if (ret)
 		return ret;
@@ -244,6 +246,125 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 }
 
 /*
+ * check if the tree block can be shared by multiple trees
+ */
+int btrfs_block_can_be_shared(struct btrfs_root *root,
+			      struct extent_buffer *buf)
+{
+	/*
+	 * Tree blocks not in refernece counted trees and tree roots
+	 * are never shared. If a block was allocated after the last
+	 * snapshot and the block was not allocated by tree relocation,
+	 * we know the block is not shared.
+	 */
+	if (root->ref_cows &&
+	    buf != root->node && buf != root->commit_root &&
+	    (btrfs_header_generation(buf) <=
+	     btrfs_root_last_snapshot(&root->root_item) ||
+	     btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
+		return 1;
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (root->ref_cows &&
+	    btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
+		return 1;
+#endif
+	return 0;
+}
+
+static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
+				       struct btrfs_root *root,
+				       struct extent_buffer *buf,
+				       struct extent_buffer *cow)
+{
+	u64 refs;
+	u64 owner;
+	u64 flags;
+	u64 new_flags = 0;
+	int ret;
+
+	/*
+	 * Backrefs update rules:
+	 *
+	 * Always use full backrefs for extent pointers in tree block
+	 * allocated by tree relocation.
+	 *
+	 * If a shared tree block is no longer referenced by its owner
+	 * tree (btrfs_header_owner(buf) == root->root_key.objectid),
+	 * use full backrefs for extent pointers in tree block.
+	 *
+	 * If a tree block is been relocating
+	 * (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID),
+	 * use full backrefs for extent pointers in tree block.
+	 * The reason for this is some operations (such as drop tree)
+	 * are only allowed for blocks use full backrefs.
+	 */
+
+	if (btrfs_block_can_be_shared(root, buf)) {
+		ret = btrfs_lookup_extent_info(trans, root, buf->start,
+					       buf->len, &refs, &flags);
+		BUG_ON(ret);
+		BUG_ON(refs == 0);
+	} else {
+		refs = 1;
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
+		    btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
+			flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+		else
+			flags = 0;
+	}
+
+	owner = btrfs_header_owner(buf);
+	BUG_ON(owner == BTRFS_TREE_RELOC_OBJECTID &&
+	       !(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+
+	if (refs > 1) {
+		if ((owner == root->root_key.objectid ||
+		     root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) &&
+		    !(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)) {
+			ret = btrfs_inc_ref(trans, root, buf, 1);
+			BUG_ON(ret);
+
+			if (root->root_key.objectid ==
+			    BTRFS_TREE_RELOC_OBJECTID) {
+				ret = btrfs_dec_ref(trans, root, buf, 0);
+				BUG_ON(ret);
+				ret = btrfs_inc_ref(trans, root, cow, 1);
+				BUG_ON(ret);
+			}
+			new_flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
+		} else {
+
+			if (root->root_key.objectid ==
+			    BTRFS_TREE_RELOC_OBJECTID)
+				ret = btrfs_inc_ref(trans, root, cow, 1);
+			else
+				ret = btrfs_inc_ref(trans, root, cow, 0);
+			BUG_ON(ret);
+		}
+		if (new_flags != 0) {
+			ret = btrfs_set_disk_extent_flags(trans, root,
+							  buf->start,
+							  buf->len,
+							  new_flags, 0);
+			BUG_ON(ret);
+		}
+	} else {
+		if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
+			if (root->root_key.objectid ==
+			    BTRFS_TREE_RELOC_OBJECTID)
+				ret = btrfs_inc_ref(trans, root, cow, 1);
+			else
+				ret = btrfs_inc_ref(trans, root, cow, 0);
+			BUG_ON(ret);
+			ret = btrfs_dec_ref(trans, root, buf, 1);
+			BUG_ON(ret);
+		}
+		clean_tree_block(trans, root, buf);
+	}
+	return 0;
+}
+
+/*
  * does the dirty work in cow of a single block.  The parent block (if
  * supplied) is updated to point to the new cow copy.  The new buffer is marked
  * dirty and returned locked.  If you modify the block it needs to be marked
@@ -262,34 +383,39 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 			     struct extent_buffer **cow_ret,
 			     u64 search_start, u64 empty_size)
 {
-	u64 parent_start;
+	struct btrfs_disk_key disk_key;
 	struct extent_buffer *cow;
-	u32 nritems;
-	int ret = 0;
 	int level;
 	int unlock_orig = 0;
+	u64 parent_start;
 
 	if (*cow_ret == buf)
 		unlock_orig = 1;
 
 	btrfs_assert_tree_locked(buf);
 
-	if (parent)
-		parent_start = parent->start;
-	else
-		parent_start = 0;
-
 	WARN_ON(root->ref_cows && trans->transid !=
 		root->fs_info->running_transaction->transid);
 	WARN_ON(root->ref_cows && trans->transid != root->last_trans);
 
 	level = btrfs_header_level(buf);
-	nritems = btrfs_header_nritems(buf);
 
-	cow = btrfs_alloc_free_block(trans, root, buf->len,
-				     parent_start, root->root_key.objectid,
-				     trans->transid, level,
-				     search_start, empty_size);
+	if (level == 0)
+		btrfs_item_key(buf, &disk_key, 0);
+	else
+		btrfs_node_key(buf, &disk_key, 0);
+
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
+		if (parent)
+			parent_start = parent->start;
+		else
+			parent_start = 0;
+	} else
+		parent_start = 0;
+
+	cow = btrfs_alloc_free_block(trans, root, buf->len, parent_start,
+				     root->root_key.objectid, &disk_key,
+				     level, search_start, empty_size);
 	if (IS_ERR(cow))
 		return PTR_ERR(cow);
 
@@ -298,83 +424,53 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 	copy_extent_buffer(cow, buf, 0, 0, cow->len);
 	btrfs_set_header_bytenr(cow, cow->start);
 	btrfs_set_header_generation(cow, trans->transid);
-	btrfs_set_header_owner(cow, root->root_key.objectid);
-	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN);
+	btrfs_set_header_backref_rev(cow, BTRFS_MIXED_BACKREF_REV);
+	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN |
+				     BTRFS_HEADER_FLAG_RELOC);
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		btrfs_set_header_flag(cow, BTRFS_HEADER_FLAG_RELOC);
+	else
+		btrfs_set_header_owner(cow, root->root_key.objectid);
 
 	write_extent_buffer(cow, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(cow),
 			    BTRFS_FSID_SIZE);
 
-	WARN_ON(btrfs_header_generation(buf) > trans->transid);
-	if (btrfs_header_generation(buf) != trans->transid) {
-		u32 nr_extents;
-		ret = btrfs_inc_ref(trans, root, buf, cow, &nr_extents);
-		if (ret)
-			return ret;
-
-		ret = btrfs_cache_ref(trans, root, buf, nr_extents);
-		WARN_ON(ret);
-	} else if (btrfs_header_owner(buf) == BTRFS_TREE_RELOC_OBJECTID) {
-		/*
-		 * There are only two places that can drop reference to
-		 * tree blocks owned by living reloc trees, one is here,
-		 * the other place is btrfs_drop_subtree. In both places,
-		 * we check reference count while tree block is locked.
-		 * Furthermore, if reference count is one, it won't get
-		 * increased by someone else.
-		 */
-		u32 refs;
-		ret = btrfs_lookup_extent_ref(trans, root, buf->start,
-					      buf->len, &refs);
-		BUG_ON(ret);
-		if (refs == 1) {
-			ret = btrfs_update_ref(trans, root, buf, cow,
-					       0, nritems);
-			clean_tree_block(trans, root, buf);
-		} else {
-			ret = btrfs_inc_ref(trans, root, buf, cow, NULL);
-		}
-		BUG_ON(ret);
-	} else {
-		ret = btrfs_update_ref(trans, root, buf, cow, 0, nritems);
-		if (ret)
-			return ret;
-		clean_tree_block(trans, root, buf);
-	}
-
-	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
-		ret = btrfs_reloc_tree_cache_ref(trans, root, cow, buf->start);
-		WARN_ON(ret);
-	}
+	update_ref_for_cow(trans, root, buf, cow);
 
 	if (buf == root->node) {
 		WARN_ON(parent && parent != buf);
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
+		    btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
+			parent_start = buf->start;
+		else
+			parent_start = 0;
 
 		spin_lock(&root->node_lock);
 		root->node = cow;
 		extent_buffer_get(cow);
 		spin_unlock(&root->node_lock);
 
-		if (buf != root->commit_root) {
-			btrfs_free_extent(trans, root, buf->start,
-					  buf->len, buf->start,
-					  root->root_key.objectid,
-					  btrfs_header_generation(buf),
-					  level, 1);
-		}
+		btrfs_free_extent(trans, root, buf->start, buf->len,
+				  parent_start, root->root_key.objectid,
+				  level, 0);
 		free_extent_buffer(buf);
 		add_root_to_dirty_list(root);
 	} else {
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+			parent_start = parent->start;
+		else
+			parent_start = 0;
+
+		WARN_ON(trans->transid != btrfs_header_generation(parent));
 		btrfs_set_node_blockptr(parent, parent_slot,
 					cow->start);
-		WARN_ON(trans->transid == 0);
 		btrfs_set_node_ptr_generation(parent, parent_slot,
 					      trans->transid);
 		btrfs_mark_buffer_dirty(parent);
-		WARN_ON(btrfs_header_generation(parent) != trans->transid);
 		btrfs_free_extent(trans, root, buf->start, buf->len,
-				  parent_start, btrfs_header_owner(parent),
-				  btrfs_header_generation(parent), level, 1);
+				  parent_start, root->root_key.objectid,
+				  level, 0);
 	}
 	if (unlock_orig)
 		btrfs_tree_unlock(buf);
@@ -384,6 +480,18 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
+static inline int should_cow_block(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct extent_buffer *buf)
+{
+	if (btrfs_header_generation(buf) == trans->transid &&
+	    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) &&
+	    !(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID &&
+	      btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
+		return 0;
+	return 1;
+}
+
 /*
  * cows a single block, see __btrfs_cow_block for the real work.
  * This version of it has extra checks so that a block isn't cow'd more than
@@ -411,9 +519,7 @@ noinline int btrfs_cow_block(struct btrfs_trans_handle *trans,
 		WARN_ON(1);
 	}
 
-	if (btrfs_header_generation(buf) == trans->transid &&
-	    btrfs_header_owner(buf) == root->root_key.objectid &&
-	    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
+	if (!should_cow_block(trans, root, buf)) {
 		*cow_ret = buf;
 		return 0;
 	}
@@ -469,7 +575,7 @@ static int comp_keys(struct btrfs_disk_key *disk, struct btrfs_key *k2)
 /*
  * same as comp_keys only with two btrfs_key's
  */
-static int comp_cpu_keys(struct btrfs_key *k1, struct btrfs_key *k2)
+int btrfs_comp_cpu_keys(struct btrfs_key *k1, struct btrfs_key *k2)
 {
 	if (k1->objectid > k2->objectid)
 		return 1;
@@ -845,6 +951,12 @@ static int bin_search(struct extent_buffer *eb, struct btrfs_key *key,
 	return -1;
 }
 
+int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
+		     int level, int *slot)
+{
+	return bin_search(eb, key, level, slot);
+}
+
 /* given a node and slot number, this reads the blocks it points to.  The
  * extent buffer is returned with a reference taken (but unlocked).
  * NULL is returned on error.
@@ -921,13 +1033,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 		root->node = child;
 		spin_unlock(&root->node_lock);
 
-		ret = btrfs_update_extent_ref(trans, root, child->start,
-					      child->len,
-					      mid->start, child->start,
-					      root->root_key.objectid,
-					      trans->transid, level - 1);
-		BUG_ON(ret);
-
 		add_root_to_dirty_list(root);
 		btrfs_tree_unlock(child);
 
@@ -938,9 +1043,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 		/* once for the path */
 		free_extent_buffer(mid);
 		ret = btrfs_free_extent(trans, root, mid->start, mid->len,
-					mid->start, root->root_key.objectid,
-					btrfs_header_generation(mid),
-					level, 1);
+					0, root->root_key.objectid, level, 1);
 		/* once for the root ptr */
 		free_extent_buffer(mid);
 		return ret;
@@ -949,8 +1052,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 	    BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
 		return 0;
 
-	if (trans->transaction->delayed_refs.flushing &&
-	    btrfs_header_nritems(mid) > 2)
+	if (btrfs_header_nritems(mid) > 2)
 		return 0;
 
 	if (btrfs_header_nritems(mid) < 2)
@@ -998,7 +1100,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 			ret = wret;
 		if (btrfs_header_nritems(right) == 0) {
 			u64 bytenr = right->start;
-			u64 generation = btrfs_header_generation(parent);
 			u32 blocksize = right->len;
 
 			clean_tree_block(trans, root, right);
@@ -1010,9 +1111,9 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 			if (wret)
 				ret = wret;
 			wret = btrfs_free_extent(trans, root, bytenr,
-						 blocksize, parent->start,
-						 btrfs_header_owner(parent),
-						 generation, level, 1);
+						 blocksize, 0,
+						 root->root_key.objectid,
+						 level, 0);
 			if (wret)
 				ret = wret;
 		} else {
@@ -1047,7 +1148,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 	}
 	if (btrfs_header_nritems(mid) == 0) {
 		/* we've managed to empty the middle node, drop it */
-		u64 root_gen = btrfs_header_generation(parent);
 		u64 bytenr = mid->start;
 		u32 blocksize = mid->len;
 
@@ -1059,9 +1159,8 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 		if (wret)
 			ret = wret;
 		wret = btrfs_free_extent(trans, root, bytenr, blocksize,
-					 parent->start,
-					 btrfs_header_owner(parent),
-					 root_gen, level, 1);
+					 0, root->root_key.objectid,
+					 level, 0);
 		if (wret)
 			ret = wret;
 	} else {
@@ -1437,7 +1536,7 @@ noinline void btrfs_unlock_up_safe(struct btrfs_path *path, int level)
 {
 	int i;
 
-	if (path->keep_locks || path->lowest_level)
+	if (path->keep_locks)
 		return;
 
 	for (i = level; i < BTRFS_MAX_LEVEL; i++) {
@@ -1552,7 +1651,7 @@ setup_nodes_for_search(struct btrfs_trans_handle *trans,
 		}
 		b = p->nodes[level];
 	} else if (ins_len < 0 && btrfs_header_nritems(b) <
-		   BTRFS_NODEPTRS_PER_BLOCK(root) / 4) {
+		   BTRFS_NODEPTRS_PER_BLOCK(root) / 2) {
 		int sret;
 
 		sret = reada_for_balance(root, p, level);
@@ -1614,10 +1713,17 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root
 		lowest_unlock = 2;
 
 again:
-	if (p->skip_locking)
-		b = btrfs_root_node(root);
-	else
-		b = btrfs_lock_root_node(root);
+	if (p->search_commit_root) {
+		b = root->commit_root;
+		extent_buffer_get(b);
+		if (!p->skip_locking)
+			btrfs_tree_lock(b);
+	} else {
+		if (p->skip_locking)
+			b = btrfs_root_node(root);
+		else
+			b = btrfs_lock_root_node(root);
+	}
 
 	while (b) {
 		level = btrfs_header_level(b);
@@ -1638,11 +1744,9 @@ again:
 			 * then we don't want to set the path blocking,
 			 * so we test it here
 			 */
-			if (btrfs_header_generation(b) == trans->transid &&
-			    btrfs_header_owner(b) == root->root_key.objectid &&
-			    !btrfs_header_flag(b, BTRFS_HEADER_FLAG_WRITTEN)) {
+			if (!should_cow_block(trans, root, b))
 				goto cow_done;
-			}
+
 			btrfs_set_path_blocking(p);
 
 			wret = btrfs_cow_block(trans, root, b,
@@ -1764,138 +1868,6 @@ done:
 	return ret;
 }
 
-int btrfs_merge_path(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root,
-		     struct btrfs_key *node_keys,
-		     u64 *nodes, int lowest_level)
-{
-	struct extent_buffer *eb;
-	struct extent_buffer *parent;
-	struct btrfs_key key;
-	u64 bytenr;
-	u64 generation;
-	u32 blocksize;
-	int level;
-	int slot;
-	int key_match;
-	int ret;
-
-	eb = btrfs_lock_root_node(root);
-	ret = btrfs_cow_block(trans, root, eb, NULL, 0, &eb);
-	BUG_ON(ret);
-
-	btrfs_set_lock_blocking(eb);
-
-	parent = eb;
-	while (1) {
-		level = btrfs_header_level(parent);
-		if (level == 0 || level <= lowest_level)
-			break;
-
-		ret = bin_search(parent, &node_keys[lowest_level], level,
-				 &slot);
-		if (ret && slot > 0)
-			slot--;
-
-		bytenr = btrfs_node_blockptr(parent, slot);
-		if (nodes[level - 1] == bytenr)
-			break;
-
-		blocksize = btrfs_level_size(root, level - 1);
-		generation = btrfs_node_ptr_generation(parent, slot);
-		btrfs_node_key_to_cpu(eb, &key, slot);
-		key_match = !memcmp(&key, &node_keys[level - 1], sizeof(key));
-
-		if (generation == trans->transid) {
-			eb = read_tree_block(root, bytenr, blocksize,
-					     generation);
-			btrfs_tree_lock(eb);
-			btrfs_set_lock_blocking(eb);
-		}
-
-		/*
-		 * if node keys match and node pointer hasn't been modified
-		 * in the running transaction, we can merge the path. for
-		 * blocks owened by reloc trees, the node pointer check is
-		 * skipped, this is because these blocks are fully controlled
-		 * by the space balance code, no one else can modify them.
-		 */
-		if (!nodes[level - 1] || !key_match ||
-		    (generation == trans->transid &&
-		     btrfs_header_owner(eb) != BTRFS_TREE_RELOC_OBJECTID)) {
-			if (level == 1 || level == lowest_level + 1) {
-				if (generation == trans->transid) {
-					btrfs_tree_unlock(eb);
-					free_extent_buffer(eb);
-				}
-				break;
-			}
-
-			if (generation != trans->transid) {
-				eb = read_tree_block(root, bytenr, blocksize,
-						generation);
-				btrfs_tree_lock(eb);
-				btrfs_set_lock_blocking(eb);
-			}
-
-			ret = btrfs_cow_block(trans, root, eb, parent, slot,
-					      &eb);
-			BUG_ON(ret);
-
-			if (root->root_key.objectid ==
-			    BTRFS_TREE_RELOC_OBJECTID) {
-				if (!nodes[level - 1]) {
-					nodes[level - 1] = eb->start;
-					memcpy(&node_keys[level - 1], &key,
-					       sizeof(node_keys[0]));
-				} else {
-					WARN_ON(1);
-				}
-			}
-
-			btrfs_tree_unlock(parent);
-			free_extent_buffer(parent);
-			parent = eb;
-			continue;
-		}
-
-		btrfs_set_node_blockptr(parent, slot, nodes[level - 1]);
-		btrfs_set_node_ptr_generation(parent, slot, trans->transid);
-		btrfs_mark_buffer_dirty(parent);
-
-		ret = btrfs_inc_extent_ref(trans, root,
-					nodes[level - 1],
-					blocksize, parent->start,
-					btrfs_header_owner(parent),
-					btrfs_header_generation(parent),
-					level - 1);
-		BUG_ON(ret);
-
-		/*
-		 * If the block was created in the running transaction,
-		 * it's possible this is the last reference to it, so we
-		 * should drop the subtree.
-		 */
-		if (generation == trans->transid) {
-			ret = btrfs_drop_subtree(trans, root, eb, parent);
-			BUG_ON(ret);
-			btrfs_tree_unlock(eb);
-			free_extent_buffer(eb);
-		} else {
-			ret = btrfs_free_extent(trans, root, bytenr,
-					blocksize, parent->start,
-					btrfs_header_owner(parent),
-					btrfs_header_generation(parent),
-					level - 1, 1);
-			BUG_ON(ret);
-		}
-		break;
-	}
-	btrfs_tree_unlock(parent);
-	free_extent_buffer(parent);
-	return 0;
-}
-
 /*
  * adjust the pointers going up the tree, starting at level
  * making sure the right key of each node is points to 'key'.
@@ -2021,9 +1993,6 @@ static int push_node_left(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(src);
 	btrfs_mark_buffer_dirty(dst);
 
-	ret = btrfs_update_ref(trans, root, src, dst, dst_nritems, push_items);
-	BUG_ON(ret);
-
 	return ret;
 }
 
@@ -2083,9 +2052,6 @@ static int balance_node_right(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(src);
 	btrfs_mark_buffer_dirty(dst);
 
-	ret = btrfs_update_ref(trans, root, src, dst, 0, push_items);
-	BUG_ON(ret);
-
 	return ret;
 }
 
@@ -2105,7 +2071,6 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
 	struct extent_buffer *c;
 	struct extent_buffer *old;
 	struct btrfs_disk_key lower_key;
-	int ret;
 
 	BUG_ON(path->nodes[level]);
 	BUG_ON(path->nodes[level-1] != root->node);
@@ -2117,16 +2082,17 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
 		btrfs_node_key(lower, &lower_key, 0);
 
 	c = btrfs_alloc_free_block(trans, root, root->nodesize, 0,
-				   root->root_key.objectid, trans->transid,
+				   root->root_key.objectid, &lower_key,
 				   level, root->node->start, 0);
 	if (IS_ERR(c))
 		return PTR_ERR(c);
 
-	memset_extent_buffer(c, 0, 0, root->nodesize);
+	memset_extent_buffer(c, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_nritems(c, 1);
 	btrfs_set_header_level(c, level);
 	btrfs_set_header_bytenr(c, c->start);
 	btrfs_set_header_generation(c, trans->transid);
+	btrfs_set_header_backref_rev(c, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(c, root->root_key.objectid);
 
 	write_extent_buffer(c, root->fs_info->fsid,
@@ -2151,12 +2117,6 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
 	root->node = c;
 	spin_unlock(&root->node_lock);
 
-	ret = btrfs_update_extent_ref(trans, root, lower->start,
-				      lower->len, lower->start, c->start,
-				      root->root_key.objectid,
-				      trans->transid, level - 1);
-	BUG_ON(ret);
-
 	/* the super has an extra ref to root->node */
 	free_extent_buffer(old);
 
@@ -2233,7 +2193,7 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 		ret = insert_new_root(trans, root, path, level + 1);
 		if (ret)
 			return ret;
-	} else if (!trans->transaction->delayed_refs.flushing) {
+	} else {
 		ret = push_nodes_for_insert(trans, root, path, level);
 		c = path->nodes[level];
 		if (!ret && btrfs_header_nritems(c) <
@@ -2244,20 +2204,21 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 	}
 
 	c_nritems = btrfs_header_nritems(c);
+	mid = (c_nritems + 1) / 2;
+	btrfs_node_key(c, &disk_key, mid);
 
-	split = btrfs_alloc_free_block(trans, root, root->nodesize,
-					path->nodes[level + 1]->start,
+	split = btrfs_alloc_free_block(trans, root, root->nodesize, 0,
 					root->root_key.objectid,
-					trans->transid, level, c->start, 0);
+					&disk_key, level, c->start, 0);
 	if (IS_ERR(split))
 		return PTR_ERR(split);
 
-	btrfs_set_header_flags(split, btrfs_header_flags(c));
+	memset_extent_buffer(split, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_level(split, btrfs_header_level(c));
 	btrfs_set_header_bytenr(split, split->start);
 	btrfs_set_header_generation(split, trans->transid);
+	btrfs_set_header_backref_rev(split, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(split, root->root_key.objectid);
-	btrfs_set_header_flags(split, 0);
 	write_extent_buffer(split, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(split),
 			    BTRFS_FSID_SIZE);
@@ -2265,7 +2226,6 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 			    (unsigned long)btrfs_header_chunk_tree_uuid(split),
 			    BTRFS_UUID_SIZE);
 
-	mid = (c_nritems + 1) / 2;
 
 	copy_extent_buffer(split, c,
 			   btrfs_node_key_ptr_offset(0),
@@ -2278,16 +2238,12 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(c);
 	btrfs_mark_buffer_dirty(split);
 
-	btrfs_node_key(split, &disk_key, 0);
 	wret = insert_ptr(trans, root, path, &disk_key, split->start,
 			  path->slots[level + 1] + 1,
 			  level + 1);
 	if (wret)
 		ret = wret;
 
-	ret = btrfs_update_ref(trans, root, c, split, 0, c_nritems - mid);
-	BUG_ON(ret);
-
 	if (path->slots[level] >= mid) {
 		path->slots[level] -= mid;
 		btrfs_tree_unlock(c);
@@ -2360,7 +2316,6 @@ static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 	u32 right_nritems;
 	u32 data_end;
 	u32 this_item_size;
-	int ret;
 
 	if (empty)
 		nr = 0;
@@ -2473,9 +2428,6 @@ static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 		btrfs_mark_buffer_dirty(left);
 	btrfs_mark_buffer_dirty(right);
 
-	ret = btrfs_update_ref(trans, root, left, right, 0, push_items);
-	BUG_ON(ret);
-
 	btrfs_item_key(right, &disk_key, 0);
 	btrfs_set_node_key(upper, &disk_key, slot + 1);
 	btrfs_mark_buffer_dirty(upper);
@@ -2720,10 +2672,6 @@ static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
 	if (right_nritems)
 		btrfs_mark_buffer_dirty(right);
 
-	ret = btrfs_update_ref(trans, root, right, left,
-			       old_left_nritems, push_items);
-	BUG_ON(ret);
-
 	btrfs_item_key(right, &disk_key, 0);
 	wret = fixup_low_keys(trans, root, path, &disk_key, 1);
 	if (wret)
@@ -2880,9 +2828,6 @@ static noinline int copy_for_split(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(l);
 	BUG_ON(path->slots[0] != slot);
 
-	ret = btrfs_update_ref(trans, root, l, right, 0, nritems);
-	BUG_ON(ret);
-
 	if (mid <= slot) {
 		btrfs_tree_unlock(path->nodes[0]);
 		free_extent_buffer(path->nodes[0]);
@@ -2911,6 +2856,7 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 			       struct btrfs_path *path, int data_size,
 			       int extend)
 {
+	struct btrfs_disk_key disk_key;
 	struct extent_buffer *l;
 	u32 nritems;
 	int mid;
@@ -2918,12 +2864,11 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 	struct extent_buffer *right;
 	int ret = 0;
 	int wret;
-	int double_split;
+	int split;
 	int num_doubles = 0;
 
 	/* first try to make some room by pushing left and right */
-	if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY &&
-	    !trans->transaction->delayed_refs.flushing) {
+	if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
 		wret = push_leaf_right(trans, root, path, data_size, 0);
 		if (wret < 0)
 			return wret;
@@ -2945,16 +2890,53 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 			return ret;
 	}
 again:
-	double_split = 0;
+	split = 1;
 	l = path->nodes[0];
 	slot = path->slots[0];
 	nritems = btrfs_header_nritems(l);
 	mid = (nritems + 1) / 2;
 
-	right = btrfs_alloc_free_block(trans, root, root->leafsize,
-					path->nodes[1]->start,
+	if (mid <= slot) {
+		if (nritems == 1 ||
+		    leaf_space_used(l, mid, nritems - mid) + data_size >
+			BTRFS_LEAF_DATA_SIZE(root)) {
+			if (slot >= nritems) {
+				split = 0;
+			} else {
+				mid = slot;
+				if (mid != nritems &&
+				    leaf_space_used(l, mid, nritems - mid) +
+				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					split = 2;
+				}
+			}
+		}
+	} else {
+		if (leaf_space_used(l, 0, mid) + data_size >
+			BTRFS_LEAF_DATA_SIZE(root)) {
+			if (!extend && data_size && slot == 0) {
+				split = 0;
+			} else if ((extend || !data_size) && slot == 0) {
+				mid = 1;
+			} else {
+				mid = slot;
+				if (mid != nritems &&
+				    leaf_space_used(l, mid, nritems - mid) +
+				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					split = 2 ;
+				}
+			}
+		}
+	}
+
+	if (split == 0)
+		btrfs_cpu_key_to_disk(&disk_key, ins_key);
+	else
+		btrfs_item_key(l, &disk_key, mid);
+
+	right = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
 					root->root_key.objectid,
-					trans->transid, 0, l->start, 0);
+					&disk_key, 0, l->start, 0);
 	if (IS_ERR(right)) {
 		BUG_ON(1);
 		return PTR_ERR(right);
@@ -2963,6 +2945,7 @@ again:
 	memset_extent_buffer(right, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_bytenr(right, right->start);
 	btrfs_set_header_generation(right, trans->transid);
+	btrfs_set_header_backref_rev(right, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(right, root->root_key.objectid);
 	btrfs_set_header_level(right, 0);
 	write_extent_buffer(right, root->fs_info->fsid,
@@ -2973,79 +2956,47 @@ again:
 			    (unsigned long)btrfs_header_chunk_tree_uuid(right),
 			    BTRFS_UUID_SIZE);
 
-	if (mid <= slot) {
-		if (nritems == 1 ||
-		    leaf_space_used(l, mid, nritems - mid) + data_size >
-			BTRFS_LEAF_DATA_SIZE(root)) {
-			if (slot >= nritems) {
-				struct btrfs_disk_key disk_key;
-
-				btrfs_cpu_key_to_disk(&disk_key, ins_key);
-				btrfs_set_header_nritems(right, 0);
-				wret = insert_ptr(trans, root, path,
-						  &disk_key, right->start,
-						  path->slots[1] + 1, 1);
-				if (wret)
-					ret = wret;
+	if (split == 0) {
+		if (mid <= slot) {
+			btrfs_set_header_nritems(right, 0);
+			wret = insert_ptr(trans, root, path,
+					  &disk_key, right->start,
+					  path->slots[1] + 1, 1);
+			if (wret)
+				ret = wret;
 
-				btrfs_tree_unlock(path->nodes[0]);
-				free_extent_buffer(path->nodes[0]);
-				path->nodes[0] = right;
-				path->slots[0] = 0;
-				path->slots[1] += 1;
-				btrfs_mark_buffer_dirty(right);
-				return ret;
-			}
-			mid = slot;
-			if (mid != nritems &&
-			    leaf_space_used(l, mid, nritems - mid) +
-			    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
-				double_split = 1;
-			}
-		}
-	} else {
-		if (leaf_space_used(l, 0, mid) + data_size >
-			BTRFS_LEAF_DATA_SIZE(root)) {
-			if (!extend && data_size && slot == 0) {
-				struct btrfs_disk_key disk_key;
-
-				btrfs_cpu_key_to_disk(&disk_key, ins_key);
-				btrfs_set_header_nritems(right, 0);
-				wret = insert_ptr(trans, root, path,
-						  &disk_key,
-						  right->start,
-						  path->slots[1], 1);
+			btrfs_tree_unlock(path->nodes[0]);
+			free_extent_buffer(path->nodes[0]);
+			path->nodes[0] = right;
+			path->slots[0] = 0;
+			path->slots[1] += 1;
+		} else {
+			btrfs_set_header_nritems(right, 0);
+			wret = insert_ptr(trans, root, path,
+					  &disk_key,
+					  right->start,
+					  path->slots[1], 1);
+			if (wret)
+				ret = wret;
+			btrfs_tree_unlock(path->nodes[0]);
+			free_extent_buffer(path->nodes[0]);
+			path->nodes[0] = right;
+			path->slots[0] = 0;
+			if (path->slots[1] == 0) {
+				wret = fixup_low_keys(trans, root,
+						path, &disk_key, 1);
 				if (wret)
 					ret = wret;
-				btrfs_tree_unlock(path->nodes[0]);
-				free_extent_buffer(path->nodes[0]);
-				path->nodes[0] = right;
-				path->slots[0] = 0;
-				if (path->slots[1] == 0) {
-					wret = fixup_low_keys(trans, root,
-						      path, &disk_key, 1);
-					if (wret)
-						ret = wret;
-				}
-				btrfs_mark_buffer_dirty(right);
-				return ret;
-			} else if ((extend || !data_size) && slot == 0) {
-				mid = 1;
-			} else {
-				mid = slot;
-				if (mid != nritems &&
-				    leaf_space_used(l, mid, nritems - mid) +
-				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
-					double_split = 1;
-				}
 			}
 		}
+		btrfs_mark_buffer_dirty(right);
+		return ret;
 	}
 
 	ret = copy_for_split(trans, root, path, l, right, slot, mid, nritems);
 	BUG_ON(ret);
 
-	if (double_split) {
+	if (split == 2) {
 		BUG_ON(num_doubles != 0);
 		num_doubles++;
 		goto again;
@@ -3447,7 +3398,7 @@ int btrfs_insert_some_items(struct btrfs_trans_handle *trans,
 		/* figure out how many keys we can insert in here */
 		total_data = data_size[0];
 		for (i = 1; i < nr; i++) {
-			if (comp_cpu_keys(&found_key, cpu_key + i) <= 0)
+			if (btrfs_comp_cpu_keys(&found_key, cpu_key + i) <= 0)
 				break;
 			total_data += data_size[i];
 		}
@@ -3745,9 +3696,7 @@ static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 
 /*
  * a helper function to delete the leaf pointed to by path->slots[1] and
- * path->nodes[1].  bytenr is the node block pointer, but since the callers
- * already know it, it is faster to have them pass it down than to
- * read it out of the node again.
+ * path->nodes[1].
  *
  * This deletes the pointer in path->nodes[1] and frees the leaf
  * block extent.  zero is returned if it all worked out, < 0 otherwise.
@@ -3755,15 +3704,14 @@ static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
  * The path must have already been setup for deleting the leaf, including
  * all the proper balancing.  path->nodes[1] must be locked.
  */
-noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root,
-			    struct btrfs_path *path, u64 bytenr)
+static noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct btrfs_path *path,
+				   struct extent_buffer *leaf)
 {
 	int ret;
-	u64 root_gen = btrfs_header_generation(path->nodes[1]);
-	u64 parent_start = path->nodes[1]->start;
-	u64 parent_owner = btrfs_header_owner(path->nodes[1]);
 
+	WARN_ON(btrfs_header_generation(leaf) != trans->transid);
 	ret = del_ptr(trans, root, path, 1, path->slots[1]);
 	if (ret)
 		return ret;
@@ -3774,10 +3722,8 @@ noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
 	 */
 	btrfs_unlock_up_safe(path, 0);
 
-	ret = btrfs_free_extent(trans, root, bytenr,
-				btrfs_level_size(root, 0),
-				parent_start, parent_owner,
-				root_gen, 0, 1);
+	ret = btrfs_free_extent(trans, root, leaf->start, leaf->len,
+				0, root->root_key.objectid, 0, 0);
 	return ret;
 }
 /*
@@ -3845,7 +3791,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		if (leaf == root->node) {
 			btrfs_set_header_level(leaf, 0);
 		} else {
-			ret = btrfs_del_leaf(trans, root, path, leaf->start);
+			ret = btrfs_del_leaf(trans, root, path, leaf);
 			BUG_ON(ret);
 		}
 	} else {
@@ -3861,8 +3807,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		}
 
 		/* delete the leaf if it is mostly empty */
-		if (used < BTRFS_LEAF_DATA_SIZE(root) / 4 &&
-		    !trans->transaction->delayed_refs.flushing) {
+		if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
 			/* push_leaf_left fixes the path.
 			 * make sure the path still points to our leaf
 			 * for possible call to del_ptr below
@@ -3884,8 +3829,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 
 			if (btrfs_header_nritems(leaf) == 0) {
 				path->slots[1] = slot;
-				ret = btrfs_del_leaf(trans, root, path,
-						     leaf->start);
+				ret = btrfs_del_leaf(trans, root, path, leaf);
 				BUG_ON(ret);
 				free_extent_buffer(leaf);
 			} else {
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 4414a5d9983..03441a99ea3 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -45,6 +45,8 @@ struct btrfs_ordered_sum;
 
 #define BTRFS_MAX_LEVEL 8
 
+#define BTRFS_COMPAT_EXTENT_TREE_V0
+
 /*
  * files bigger than this get some pre-flushing when they are added
  * to the ordered operations list.  That way we limit the total
@@ -267,7 +269,18 @@ static inline unsigned long btrfs_chunk_item_size(int num_stripes)
 }
 
 #define BTRFS_FSID_SIZE 16
-#define BTRFS_HEADER_FLAG_WRITTEN (1 << 0)
+#define BTRFS_HEADER_FLAG_WRITTEN	(1ULL << 0)
+#define BTRFS_HEADER_FLAG_RELOC		(1ULL << 1)
+#define BTRFS_SUPER_FLAG_SEEDING	(1ULL << 32)
+#define BTRFS_SUPER_FLAG_METADUMP	(1ULL << 33)
+
+#define BTRFS_BACKREF_REV_MAX		256
+#define BTRFS_BACKREF_REV_SHIFT		56
+#define BTRFS_BACKREF_REV_MASK		(((u64)BTRFS_BACKREF_REV_MAX - 1) << \
+					 BTRFS_BACKREF_REV_SHIFT)
+
+#define BTRFS_OLD_BACKREF_REV		0
+#define BTRFS_MIXED_BACKREF_REV		1
 
 /*
  * every tree block (leaf or node) starts with this header.
@@ -296,7 +309,6 @@ struct btrfs_header {
 					sizeof(struct btrfs_item) - \
 					sizeof(struct btrfs_file_extent_item))
 
-#define BTRFS_SUPER_FLAG_SEEDING (1ULL << 32)
 
 /*
  * this is a very generous portion of the super block, giving us
@@ -355,9 +367,12 @@ struct btrfs_super_block {
  * Compat flags that we support.  If any incompat flags are set other than the
  * ones specified below then we will fail to mount
  */
-#define BTRFS_FEATURE_COMPAT_SUPP	0x0
-#define BTRFS_FEATURE_COMPAT_RO_SUPP	0x0
-#define BTRFS_FEATURE_INCOMPAT_SUPP	0x0
+#define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF	(1ULL << 0)
+
+#define BTRFS_FEATURE_COMPAT_SUPP		0ULL
+#define BTRFS_FEATURE_COMPAT_RO_SUPP		0ULL
+#define BTRFS_FEATURE_INCOMPAT_SUPP		\
+	BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF
 
 /*
  * A leaf is full of items. offset and size tell us where to find
@@ -421,23 +436,65 @@ struct btrfs_path {
 	unsigned int keep_locks:1;
 	unsigned int skip_locking:1;
 	unsigned int leave_spinning:1;
+	unsigned int search_commit_root:1;
 };
 
 /*
  * items in the extent btree are used to record the objectid of the
  * owner of the block and the number of references
  */
+
 struct btrfs_extent_item {
+	__le64 refs;
+	__le64 generation;
+	__le64 flags;
+} __attribute__ ((__packed__));
+
+struct btrfs_extent_item_v0 {
 	__le32 refs;
 } __attribute__ ((__packed__));
 
-struct btrfs_extent_ref {
+#define BTRFS_MAX_EXTENT_ITEM_SIZE(r) ((BTRFS_LEAF_DATA_SIZE(r) >> 4) - \
+					sizeof(struct btrfs_item))
+
+#define BTRFS_EXTENT_FLAG_DATA		(1ULL << 0)
+#define BTRFS_EXTENT_FLAG_TREE_BLOCK	(1ULL << 1)
+
+/* following flags only apply to tree blocks */
+
+/* use full backrefs for extent pointers in the block */
+#define BTRFS_BLOCK_FLAG_FULL_BACKREF	(1ULL << 8)
+
+struct btrfs_tree_block_info {
+	struct btrfs_disk_key key;
+	u8 level;
+} __attribute__ ((__packed__));
+
+struct btrfs_extent_data_ref {
+	__le64 root;
+	__le64 objectid;
+	__le64 offset;
+	__le32 count;
+} __attribute__ ((__packed__));
+
+struct btrfs_shared_data_ref {
+	__le32 count;
+} __attribute__ ((__packed__));
+
+struct btrfs_extent_inline_ref {
+	u8 type;
+	u64 offset;
+} __attribute__ ((__packed__));
+
+/* old style backrefs item */
+struct btrfs_extent_ref_v0 {
 	__le64 root;
 	__le64 generation;
 	__le64 objectid;
-	__le32 num_refs;
+	__le32 count;
 } __attribute__ ((__packed__));
 
+
 /* dev extents record free space on individual devices.  The owner
  * field points back to the chunk allocation mapping tree that allocated
  * the extent.  The chunk tree uuid field is a way to double check the owner
@@ -695,12 +752,7 @@ struct btrfs_block_group_cache {
 	struct list_head cluster_list;
 };
 
-struct btrfs_leaf_ref_tree {
-	struct rb_root root;
-	struct list_head list;
-	spinlock_t lock;
-};
-
+struct reloc_control;
 struct btrfs_device;
 struct btrfs_fs_devices;
 struct btrfs_fs_info {
@@ -831,18 +883,11 @@ struct btrfs_fs_info {
 	struct task_struct *cleaner_kthread;
 	int thread_pool_size;
 
-	/* tree relocation relocated fields */
-	struct list_head dead_reloc_roots;
-	struct btrfs_leaf_ref_tree reloc_ref_tree;
-	struct btrfs_leaf_ref_tree shared_ref_tree;
-
 	struct kobject super_kobj;
 	struct completion kobj_unregister;
 	int do_barriers;
 	int closing;
 	int log_root_recovering;
-	atomic_t throttles;
-	atomic_t throttle_gen;
 
 	u64 total_pinned;
 
@@ -861,6 +906,8 @@ struct btrfs_fs_info {
 	 */
 	struct list_head space_info;
 
+	struct reloc_control *reloc_ctl;
+
 	spinlock_t delalloc_lock;
 	spinlock_t new_trans_lock;
 	u64 delalloc_bytes;
@@ -891,7 +938,6 @@ struct btrfs_fs_info {
  * in ram representation of the tree.  extent_root is used for all allocations
  * and for the extent tree extent_root root.
  */
-struct btrfs_dirty_root;
 struct btrfs_root {
 	struct extent_buffer *node;
 
@@ -899,9 +945,6 @@ struct btrfs_root {
 	spinlock_t node_lock;
 
 	struct extent_buffer *commit_root;
-	struct btrfs_leaf_ref_tree *ref_tree;
-	struct btrfs_leaf_ref_tree ref_tree_struct;
-	struct btrfs_dirty_root *dirty_root;
 	struct btrfs_root *log_root;
 	struct btrfs_root *reloc_root;
 
@@ -952,10 +995,15 @@ struct btrfs_root {
 	/* the dirty list is only used by non-reference counted roots */
 	struct list_head dirty_list;
 
+	struct list_head root_list;
+
 	spinlock_t list_lock;
-	struct list_head dead_list;
 	struct list_head orphan_list;
 
+	spinlock_t inode_lock;
+	/* red-black tree that keeps track of in-memory inodes */
+	struct rb_root inode_tree;
+
 	/*
 	 * right now this just gets used so that a root has its own devid
 	 * for stat.  It may be used for more later
@@ -1017,7 +1065,16 @@ struct btrfs_root {
  * are used, and how many references there are to each block
  */
 #define BTRFS_EXTENT_ITEM_KEY	168
-#define BTRFS_EXTENT_REF_KEY	180
+
+#define BTRFS_TREE_BLOCK_REF_KEY	176
+
+#define BTRFS_EXTENT_DATA_REF_KEY	178
+
+#define BTRFS_EXTENT_REF_V0_KEY		180
+
+#define BTRFS_SHARED_BLOCK_REF_KEY	182
+
+#define BTRFS_SHARED_DATA_REF_KEY	184
 
 /*
  * block groups give us hints into the extent allocation trees.  Which
@@ -1043,6 +1100,8 @@ struct btrfs_root {
 #define BTRFS_MOUNT_COMPRESS		(1 << 5)
 #define BTRFS_MOUNT_NOTREELOG           (1 << 6)
 #define BTRFS_MOUNT_FLUSHONCOMMIT       (1 << 7)
+#define BTRFS_MOUNT_SSD_SPREAD		(1 << 8)
+#define BTRFS_MOUNT_NOSSD		(1 << 9)
 
 #define btrfs_clear_opt(o, opt)		((o) &= ~BTRFS_MOUNT_##opt)
 #define btrfs_set_opt(o, opt)		((o) |= BTRFS_MOUNT_##opt)
@@ -1056,12 +1115,14 @@ struct btrfs_root {
 #define BTRFS_INODE_READONLY		(1 << 2)
 #define BTRFS_INODE_NOCOMPRESS		(1 << 3)
 #define BTRFS_INODE_PREALLOC		(1 << 4)
-#define btrfs_clear_flag(inode, flag)	(BTRFS_I(inode)->flags &= \
-					 ~BTRFS_INODE_##flag)
-#define btrfs_set_flag(inode, flag)	(BTRFS_I(inode)->flags |= \
-					 BTRFS_INODE_##flag)
-#define btrfs_test_flag(inode, flag)	(BTRFS_I(inode)->flags & \
-					 BTRFS_INODE_##flag)
+#define BTRFS_INODE_SYNC		(1 << 5)
+#define BTRFS_INODE_IMMUTABLE		(1 << 6)
+#define BTRFS_INODE_APPEND		(1 << 7)
+#define BTRFS_INODE_NODUMP		(1 << 8)
+#define BTRFS_INODE_NOATIME		(1 << 9)
+#define BTRFS_INODE_DIRSYNC		(1 << 10)
+
+
 /* some macros to generate set/get funcs for the struct fields.  This
  * assumes there is a lefoo_to_cpu for every type, so lets make a simple
  * one for u8:
@@ -1317,24 +1378,67 @@ static inline u8 *btrfs_dev_extent_chunk_tree_uuid(struct btrfs_dev_extent *dev)
 	return (u8 *)((unsigned long)dev + ptr);
 }
 
-/* struct btrfs_extent_ref */
-BTRFS_SETGET_FUNCS(ref_root, struct btrfs_extent_ref, root, 64);
-BTRFS_SETGET_FUNCS(ref_generation, struct btrfs_extent_ref, generation, 64);
-BTRFS_SETGET_FUNCS(ref_objectid, struct btrfs_extent_ref, objectid, 64);
-BTRFS_SETGET_FUNCS(ref_num_refs, struct btrfs_extent_ref, num_refs, 32);
+BTRFS_SETGET_FUNCS(extent_refs, struct btrfs_extent_item, refs, 64);
+BTRFS_SETGET_FUNCS(extent_generation, struct btrfs_extent_item,
+		   generation, 64);
+BTRFS_SETGET_FUNCS(extent_flags, struct btrfs_extent_item, flags, 64);
 
-BTRFS_SETGET_STACK_FUNCS(stack_ref_root, struct btrfs_extent_ref, root, 64);
-BTRFS_SETGET_STACK_FUNCS(stack_ref_generation, struct btrfs_extent_ref,
-			 generation, 64);
-BTRFS_SETGET_STACK_FUNCS(stack_ref_objectid, struct btrfs_extent_ref,
-			 objectid, 64);
-BTRFS_SETGET_STACK_FUNCS(stack_ref_num_refs, struct btrfs_extent_ref,
-			 num_refs, 32);
+BTRFS_SETGET_FUNCS(extent_refs_v0, struct btrfs_extent_item_v0, refs, 32);
+
+
+BTRFS_SETGET_FUNCS(tree_block_level, struct btrfs_tree_block_info, level, 8);
+
+static inline void btrfs_tree_block_key(struct extent_buffer *eb,
+					struct btrfs_tree_block_info *item,
+					struct btrfs_disk_key *key)
+{
+	read_eb_member(eb, item, struct btrfs_tree_block_info, key, key);
+}
+
+static inline void btrfs_set_tree_block_key(struct extent_buffer *eb,
+					    struct btrfs_tree_block_info *item,
+					    struct btrfs_disk_key *key)
+{
+	write_eb_member(eb, item, struct btrfs_tree_block_info, key, key);
+}
+
+BTRFS_SETGET_FUNCS(extent_data_ref_root, struct btrfs_extent_data_ref,
+		   root, 64);
+BTRFS_SETGET_FUNCS(extent_data_ref_objectid, struct btrfs_extent_data_ref,
+		   objectid, 64);
+BTRFS_SETGET_FUNCS(extent_data_ref_offset, struct btrfs_extent_data_ref,
+		   offset, 64);
+BTRFS_SETGET_FUNCS(extent_data_ref_count, struct btrfs_extent_data_ref,
+		   count, 32);
+
+BTRFS_SETGET_FUNCS(shared_data_ref_count, struct btrfs_shared_data_ref,
+		   count, 32);
 
-/* struct btrfs_extent_item */
-BTRFS_SETGET_FUNCS(extent_refs, struct btrfs_extent_item, refs, 32);
-BTRFS_SETGET_STACK_FUNCS(stack_extent_refs, struct btrfs_extent_item,
-			 refs, 32);
+BTRFS_SETGET_FUNCS(extent_inline_ref_type, struct btrfs_extent_inline_ref,
+		   type, 8);
+BTRFS_SETGET_FUNCS(extent_inline_ref_offset, struct btrfs_extent_inline_ref,
+		   offset, 64);
+
+static inline u32 btrfs_extent_inline_ref_size(int type)
+{
+	if (type == BTRFS_TREE_BLOCK_REF_KEY ||
+	    type == BTRFS_SHARED_BLOCK_REF_KEY)
+		return sizeof(struct btrfs_extent_inline_ref);
+	if (type == BTRFS_SHARED_DATA_REF_KEY)
+		return sizeof(struct btrfs_shared_data_ref) +
+		       sizeof(struct btrfs_extent_inline_ref);
+	if (type == BTRFS_EXTENT_DATA_REF_KEY)
+		return sizeof(struct btrfs_extent_data_ref) +
+		       offsetof(struct btrfs_extent_inline_ref, offset);
+	BUG();
+	return 0;
+}
+
+BTRFS_SETGET_FUNCS(ref_root_v0, struct btrfs_extent_ref_v0, root, 64);
+BTRFS_SETGET_FUNCS(ref_generation_v0, struct btrfs_extent_ref_v0,
+		   generation, 64);
+BTRFS_SETGET_FUNCS(ref_objectid_v0, struct btrfs_extent_ref_v0, objectid, 64);
+BTRFS_SETGET_FUNCS(ref_count_v0, struct btrfs_extent_ref_v0, count, 32);
 
 /* struct btrfs_node */
 BTRFS_SETGET_FUNCS(key_blockptr, struct btrfs_key_ptr, blockptr, 64);
@@ -1558,6 +1662,21 @@ static inline int btrfs_clear_header_flag(struct extent_buffer *eb, u64 flag)
 	return (flags & flag) == flag;
 }
 
+static inline int btrfs_header_backref_rev(struct extent_buffer *eb)
+{
+	u64 flags = btrfs_header_flags(eb);
+	return flags >> BTRFS_BACKREF_REV_SHIFT;
+}
+
+static inline void btrfs_set_header_backref_rev(struct extent_buffer *eb,
+						int rev)
+{
+	u64 flags = btrfs_header_flags(eb);
+	flags &= ~BTRFS_BACKREF_REV_MASK;
+	flags |= (u64)rev << BTRFS_BACKREF_REV_SHIFT;
+	btrfs_set_header_flags(eb, flags);
+}
+
 static inline u8 *btrfs_header_fsid(struct extent_buffer *eb)
 {
 	unsigned long ptr = offsetof(struct btrfs_header, fsid);
@@ -1790,39 +1909,32 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root, struct extent_buffer *leaf);
 int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root, u64 objectid, u64 bytenr);
+			  struct btrfs_root *root,
+			  u64 objectid, u64 offset, u64 bytenr);
 int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy);
 struct btrfs_block_group_cache *btrfs_lookup_block_group(
 						 struct btrfs_fs_info *info,
 						 u64 bytenr);
+void btrfs_put_block_group(struct btrfs_block_group_cache *cache);
 u64 btrfs_find_block_group(struct btrfs_root *root,
 			   u64 search_start, u64 search_hint, int owner);
 struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
-					     struct btrfs_root *root,
-					     u32 blocksize, u64 parent,
-					     u64 root_objectid,
-					     u64 ref_generation,
-					     int level,
-					     u64 hint,
-					     u64 empty_size);
+					struct btrfs_root *root, u32 blocksize,
+					u64 parent, u64 root_objectid,
+					struct btrfs_disk_key *key, int level,
+					u64 hint, u64 empty_size);
 struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
 					    struct btrfs_root *root,
 					    u64 bytenr, u32 blocksize,
 					    int level);
-int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
-		       struct btrfs_root *root,
-		       u64 num_bytes, u64 parent, u64 min_bytes,
-		       u64 root_objectid, u64 ref_generation,
-		       u64 owner, u64 empty_size, u64 hint_byte,
-		       u64 search_end, struct btrfs_key *ins, u64 data);
-int btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins);
-int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins);
+int btrfs_alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 root_objectid, u64 owner,
+				     u64 offset, struct btrfs_key *ins);
+int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   u64 root_objectid, u64 owner, u64 offset,
+				   struct btrfs_key *ins);
 int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 				  struct btrfs_root *root,
 				  u64 num_bytes, u64 min_alloc_size,
@@ -1830,18 +1942,18 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 				  u64 search_end, struct btrfs_key *ins,
 				  u64 data);
 int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
-		  struct extent_buffer *orig_buf, struct extent_buffer *buf,
-		  u32 *nr_extents);
-int btrfs_cache_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
-		    struct extent_buffer *buf, u32 nr_extents);
-int btrfs_update_ref(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root, struct extent_buffer *orig_buf,
-		     struct extent_buffer *buf, int start_slot, int nr);
+		  struct extent_buffer *buf, int full_backref);
+int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+		  struct extent_buffer *buf, int full_backref);
+int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 flags,
+				int is_data);
 int btrfs_free_extent(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      u64 bytenr, u64 num_bytes, u64 parent,
-		      u64 root_objectid, u64 ref_generation,
-		      u64 owner_objectid, int pin);
+		      u64 root_objectid, u64 owner, u64 offset);
+
 int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len);
 int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 			       struct btrfs_root *root,
@@ -1849,13 +1961,8 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
 			 struct btrfs_root *root,
 			 u64 bytenr, u64 num_bytes, u64 parent,
-			 u64 root_objectid, u64 ref_generation,
-			 u64 owner_objectid);
-int btrfs_update_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr, u64 num_bytes,
-			    u64 orig_parent, u64 parent,
-			    u64 root_objectid, u64 ref_generation,
-			    u64 owner_objectid);
+			 u64 root_objectid, u64 owner, u64 offset);
+
 int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
 				    struct btrfs_root *root);
 int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr);
@@ -1867,16 +1974,9 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
 			   u64 size);
 int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root, u64 group_start);
-int btrfs_relocate_block_group(struct btrfs_root *root, u64 group_start);
-int btrfs_free_reloc_root(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root);
-int btrfs_drop_dead_reloc_roots(struct btrfs_root *root);
-int btrfs_reloc_tree_cache_ref(struct btrfs_trans_handle *trans,
-			       struct btrfs_root *root,
-			       struct extent_buffer *buf, u64 orig_start);
-int btrfs_add_dead_reloc_root(struct btrfs_root *root);
-int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
-int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
+int btrfs_prepare_block_group_relocation(struct btrfs_root *root,
+				struct btrfs_block_group_cache *group);
+
 u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
 void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
 void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
@@ -1891,13 +1991,12 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
 void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
 			      u64 bytes);
 /* ctree.c */
+int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
+		     int level, int *slot);
+int btrfs_comp_cpu_keys(struct btrfs_key *k1, struct btrfs_key *k2);
 int btrfs_previous_item(struct btrfs_root *root,
 			struct btrfs_path *path, u64 min_objectid,
 			int type);
-int btrfs_merge_path(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root,
-		     struct btrfs_key *node_keys,
-		     u64 *nodes, int lowest_level);
 int btrfs_set_item_key_safe(struct btrfs_trans_handle *trans,
 			    struct btrfs_root *root, struct btrfs_path *path,
 			    struct btrfs_key *new_key);
@@ -1918,6 +2017,8 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      struct extent_buffer *buf,
 		      struct extent_buffer **cow_ret, u64 new_root_objectid);
+int btrfs_block_can_be_shared(struct btrfs_root *root,
+			      struct extent_buffer *buf);
 int btrfs_extend_item(struct btrfs_trans_handle *trans, struct btrfs_root
 		      *root, struct btrfs_path *path, u32 data_size);
 int btrfs_truncate_item(struct btrfs_trans_handle *trans,
@@ -1944,9 +2045,6 @@ void btrfs_unlock_up_safe(struct btrfs_path *p, int level);
 
 int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		   struct btrfs_path *path, int slot, int nr);
-int btrfs_del_leaf(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root,
-			    struct btrfs_path *path, u64 bytenr);
 static inline int btrfs_del_item(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct btrfs_path *path)
@@ -2005,8 +2103,9 @@ int btrfs_find_last_root(struct btrfs_root *root, u64 objectid, struct
 			 btrfs_root_item *item, struct btrfs_key *key);
 int btrfs_search_root(struct btrfs_root *root, u64 search_start,
 		      u64 *found_objectid);
-int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid,
-			  struct btrfs_root *latest_root);
+int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid);
+int btrfs_set_root_node(struct btrfs_root_item *item,
+			struct extent_buffer *node);
 /* dir-item.c */
 int btrfs_insert_dir_item(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root, const char *name,
@@ -2139,7 +2238,6 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
 int btrfs_readpage(struct file *file, struct page *page);
 void btrfs_delete_inode(struct inode *inode);
 void btrfs_put_inode(struct inode *inode);
-void btrfs_read_locked_inode(struct inode *inode);
 int btrfs_write_inode(struct inode *inode, int wait);
 void btrfs_dirty_inode(struct inode *inode);
 struct inode *btrfs_alloc_inode(struct super_block *sb);
@@ -2147,12 +2245,8 @@ void btrfs_destroy_inode(struct inode *inode);
 int btrfs_init_cachep(void);
 void btrfs_destroy_cachep(void);
 long btrfs_ioctl_trans_end(struct file *file);
-struct inode *btrfs_ilookup(struct super_block *s, u64 objectid,
-			    struct btrfs_root *root, int wait);
-struct inode *btrfs_iget_locked(struct super_block *s, u64 objectid,
-				struct btrfs_root *root);
 struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
-			 struct btrfs_root *root, int *is_new);
+			 struct btrfs_root *root);
 int btrfs_commit_write(struct file *file, struct page *page,
 		       unsigned from, unsigned to);
 struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page,
@@ -2168,6 +2262,8 @@ int btrfs_cont_expand(struct inode *inode, loff_t size);
 
 /* ioctl.c */
 long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+void btrfs_update_iflags(struct inode *inode);
+void btrfs_inherit_iflags(struct inode *inode, struct inode *dir);
 
 /* file.c */
 int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync);
@@ -2205,8 +2301,20 @@ int btrfs_parse_options(struct btrfs_root *root, char *options);
 int btrfs_sync_fs(struct super_block *sb, int wait);
 
 /* acl.c */
+#ifdef CONFIG_FS_POSIX_ACL
 int btrfs_check_acl(struct inode *inode, int mask);
+#else
+#define btrfs_check_acl NULL
+#endif
 int btrfs_init_acl(struct inode *inode, struct inode *dir);
 int btrfs_acl_chmod(struct inode *inode);
 
+/* relocation.c */
+int btrfs_relocate_block_group(struct btrfs_root *root, u64 group_start);
+int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root);
+int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
+			    struct btrfs_root *root);
+int btrfs_recover_relocation(struct btrfs_root *root);
+int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
 #endif
diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c
index d6c01c096a4..84e6781413b 100644
--- a/fs/btrfs/delayed-ref.c
+++ b/fs/btrfs/delayed-ref.c
@@ -29,27 +29,87 @@
  * add extents in the middle of btrfs_search_slot, and it allows
  * us to buffer up frequently modified backrefs in an rb tree instead
  * of hammering updates on the extent allocation tree.
- *
- * Right now this code is only used for reference counted trees, but
- * the long term goal is to get rid of the similar code for delayed
- * extent tree modifications.
  */
 
 /*
- * entries in the rb tree are ordered by the byte number of the extent
- * and by the byte number of the parent block.
+ * compare two delayed tree backrefs with same bytenr and type
+ */
+static int comp_tree_refs(struct btrfs_delayed_tree_ref *ref2,
+			  struct btrfs_delayed_tree_ref *ref1)
+{
+	if (ref1->node.type == BTRFS_TREE_BLOCK_REF_KEY) {
+		if (ref1->root < ref2->root)
+			return -1;
+		if (ref1->root > ref2->root)
+			return 1;
+	} else {
+		if (ref1->parent < ref2->parent)
+			return -1;
+		if (ref1->parent > ref2->parent)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * compare two delayed data backrefs with same bytenr and type
  */
-static int comp_entry(struct btrfs_delayed_ref_node *ref,
-		      u64 bytenr, u64 parent)
+static int comp_data_refs(struct btrfs_delayed_data_ref *ref2,
+			  struct btrfs_delayed_data_ref *ref1)
 {
-	if (bytenr < ref->bytenr)
+	if (ref1->node.type == BTRFS_EXTENT_DATA_REF_KEY) {
+		if (ref1->root < ref2->root)
+			return -1;
+		if (ref1->root > ref2->root)
+			return 1;
+		if (ref1->objectid < ref2->objectid)
+			return -1;
+		if (ref1->objectid > ref2->objectid)
+			return 1;
+		if (ref1->offset < ref2->offset)
+			return -1;
+		if (ref1->offset > ref2->offset)
+			return 1;
+	} else {
+		if (ref1->parent < ref2->parent)
+			return -1;
+		if (ref1->parent > ref2->parent)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * entries in the rb tree are ordered by the byte number of the extent,
+ * type of the delayed backrefs and content of delayed backrefs.
+ */
+static int comp_entry(struct btrfs_delayed_ref_node *ref2,
+		      struct btrfs_delayed_ref_node *ref1)
+{
+	if (ref1->bytenr < ref2->bytenr)
 		return -1;
-	if (bytenr > ref->bytenr)
+	if (ref1->bytenr > ref2->bytenr)
 		return 1;
-	if (parent < ref->parent)
+	if (ref1->is_head && ref2->is_head)
+		return 0;
+	if (ref2->is_head)
 		return -1;
-	if (parent > ref->parent)
+	if (ref1->is_head)
 		return 1;
+	if (ref1->type < ref2->type)
+		return -1;
+	if (ref1->type > ref2->type)
+		return 1;
+	if (ref1->type == BTRFS_TREE_BLOCK_REF_KEY ||
+	    ref1->type == BTRFS_SHARED_BLOCK_REF_KEY) {
+		return comp_tree_refs(btrfs_delayed_node_to_tree_ref(ref2),
+				      btrfs_delayed_node_to_tree_ref(ref1));
+	} else if (ref1->type == BTRFS_EXTENT_DATA_REF_KEY ||
+		   ref1->type == BTRFS_SHARED_DATA_REF_KEY) {
+		return comp_data_refs(btrfs_delayed_node_to_data_ref(ref2),
+				      btrfs_delayed_node_to_data_ref(ref1));
+	}
+	BUG();
 	return 0;
 }
 
@@ -59,20 +119,21 @@ static int comp_entry(struct btrfs_delayed_ref_node *ref,
  * inserted.
  */
 static struct btrfs_delayed_ref_node *tree_insert(struct rb_root *root,
-						  u64 bytenr, u64 parent,
 						  struct rb_node *node)
 {
 	struct rb_node **p = &root->rb_node;
 	struct rb_node *parent_node = NULL;
 	struct btrfs_delayed_ref_node *entry;
+	struct btrfs_delayed_ref_node *ins;
 	int cmp;
 
+	ins = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
 	while (*p) {
 		parent_node = *p;
 		entry = rb_entry(parent_node, struct btrfs_delayed_ref_node,
 				 rb_node);
 
-		cmp = comp_entry(entry, bytenr, parent);
+		cmp = comp_entry(entry, ins);
 		if (cmp < 0)
 			p = &(*p)->rb_left;
 		else if (cmp > 0)
@@ -81,18 +142,17 @@ static struct btrfs_delayed_ref_node *tree_insert(struct rb_root *root,
 			return entry;
 	}
 
-	entry = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
 	rb_link_node(node, parent_node, p);
 	rb_insert_color(node, root);
 	return NULL;
 }
 
 /*
- * find an entry based on (bytenr,parent).  This returns the delayed
- * ref if it was able to find one, or NULL if nothing was in that spot
+ * find an head entry based on bytenr. This returns the delayed ref
+ * head if it was able to find one, or NULL if nothing was in that spot
  */
-static struct btrfs_delayed_ref_node *tree_search(struct rb_root *root,
-				  u64 bytenr, u64 parent,
+static struct btrfs_delayed_ref_node *find_ref_head(struct rb_root *root,
+				  u64 bytenr,
 				  struct btrfs_delayed_ref_node **last)
 {
 	struct rb_node *n = root->rb_node;
@@ -105,7 +165,15 @@ static struct btrfs_delayed_ref_node *tree_search(struct rb_root *root,
 		if (last)
 			*last = entry;
 
-		cmp = comp_entry(entry, bytenr, parent);
+		if (bytenr < entry->bytenr)
+			cmp = -1;
+		else if (bytenr > entry->bytenr)
+			cmp = 1;
+		else if (!btrfs_delayed_ref_is_head(entry))
+			cmp = 1;
+		else
+			cmp = 0;
+
 		if (cmp < 0)
 			n = n->rb_left;
 		else if (cmp > 0)
@@ -154,7 +222,7 @@ int btrfs_find_ref_cluster(struct btrfs_trans_handle *trans,
 		node = rb_first(&delayed_refs->root);
 	} else {
 		ref = NULL;
-		tree_search(&delayed_refs->root, start, (u64)-1, &ref);
+		find_ref_head(&delayed_refs->root, start, &ref);
 		if (ref) {
 			struct btrfs_delayed_ref_node *tmp;
 
@@ -234,7 +302,7 @@ int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr)
 	delayed_refs = &trans->transaction->delayed_refs;
 	spin_lock(&delayed_refs->lock);
 
-	ref = tree_search(&delayed_refs->root, bytenr, (u64)-1, NULL);
+	ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
 	if (ref) {
 		prev_node = rb_prev(&ref->rb_node);
 		if (!prev_node)
@@ -250,25 +318,28 @@ out:
 }
 
 /*
- * helper function to lookup reference count
+ * helper function to lookup reference count and flags of extent.
  *
  * the head node for delayed ref is used to store the sum of all the
- * reference count modifications queued up in the rbtree.  This way you
- * can check to see what the reference count would be if all of the
- * delayed refs are processed.
+ * reference count modifications queued up in the rbtree. the head
+ * node may also store the extent flags to set. This way you can check
+ * to see what the reference count and extent flags would be if all of
+ * the delayed refs are not processed.
  */
-int btrfs_lookup_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr,
-			    u64 num_bytes, u32 *refs)
+int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root, u64 bytenr,
+			     u64 num_bytes, u64 *refs, u64 *flags)
 {
 	struct btrfs_delayed_ref_node *ref;
 	struct btrfs_delayed_ref_head *head;
 	struct btrfs_delayed_ref_root *delayed_refs;
 	struct btrfs_path *path;
-	struct extent_buffer *leaf;
 	struct btrfs_extent_item *ei;
+	struct extent_buffer *leaf;
 	struct btrfs_key key;
-	u32 num_refs;
+	u32 item_size;
+	u64 num_refs;
+	u64 extent_flags;
 	int ret;
 
 	path = btrfs_alloc_path();
@@ -287,37 +358,60 @@ again:
 
 	if (ret == 0) {
 		leaf = path->nodes[0];
-		ei = btrfs_item_ptr(leaf, path->slots[0],
-				    struct btrfs_extent_item);
-		num_refs = btrfs_extent_refs(leaf, ei);
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+		if (item_size >= sizeof(*ei)) {
+			ei = btrfs_item_ptr(leaf, path->slots[0],
+					    struct btrfs_extent_item);
+			num_refs = btrfs_extent_refs(leaf, ei);
+			extent_flags = btrfs_extent_flags(leaf, ei);
+		} else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+			struct btrfs_extent_item_v0 *ei0;
+			BUG_ON(item_size != sizeof(*ei0));
+			ei0 = btrfs_item_ptr(leaf, path->slots[0],
+					     struct btrfs_extent_item_v0);
+			num_refs = btrfs_extent_refs_v0(leaf, ei0);
+			/* FIXME: this isn't correct for data */
+			extent_flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+#else
+			BUG();
+#endif
+		}
+		BUG_ON(num_refs == 0);
 	} else {
 		num_refs = 0;
+		extent_flags = 0;
 		ret = 0;
 	}
 
 	spin_lock(&delayed_refs->lock);
-	ref = tree_search(&delayed_refs->root, bytenr, (u64)-1, NULL);
+	ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
 	if (ref) {
 		head = btrfs_delayed_node_to_head(ref);
-		if (mutex_trylock(&head->mutex)) {
-			num_refs += ref->ref_mod;
-			mutex_unlock(&head->mutex);
-			*refs = num_refs;
-			goto out;
-		}
+		if (!mutex_trylock(&head->mutex)) {
+			atomic_inc(&ref->refs);
+			spin_unlock(&delayed_refs->lock);
 
-		atomic_inc(&ref->refs);
-		spin_unlock(&delayed_refs->lock);
+			btrfs_release_path(root->fs_info->extent_root, path);
 
-		btrfs_release_path(root->fs_info->extent_root, path);
+			mutex_lock(&head->mutex);
+			mutex_unlock(&head->mutex);
+			btrfs_put_delayed_ref(ref);
+			goto again;
+		}
+		if (head->extent_op && head->extent_op->update_flags)
+			extent_flags |= head->extent_op->flags_to_set;
+		else
+			BUG_ON(num_refs == 0);
 
-		mutex_lock(&head->mutex);
+		num_refs += ref->ref_mod;
 		mutex_unlock(&head->mutex);
-		btrfs_put_delayed_ref(ref);
-		goto again;
-	} else {
-		*refs = num_refs;
 	}
+	WARN_ON(num_refs == 0);
+	if (refs)
+		*refs = num_refs;
+	if (flags)
+		*flags = extent_flags;
 out:
 	spin_unlock(&delayed_refs->lock);
 	btrfs_free_path(path);
@@ -338,16 +432,7 @@ update_existing_ref(struct btrfs_trans_handle *trans,
 		    struct btrfs_delayed_ref_node *existing,
 		    struct btrfs_delayed_ref_node *update)
 {
-	struct btrfs_delayed_ref *existing_ref;
-	struct btrfs_delayed_ref *ref;
-
-	existing_ref = btrfs_delayed_node_to_ref(existing);
-	ref = btrfs_delayed_node_to_ref(update);
-
-	if (ref->pin)
-		existing_ref->pin = 1;
-
-	if (ref->action != existing_ref->action) {
+	if (update->action != existing->action) {
 		/*
 		 * this is effectively undoing either an add or a
 		 * drop.  We decrement the ref_mod, and if it goes
@@ -363,20 +448,13 @@ update_existing_ref(struct btrfs_trans_handle *trans,
 			delayed_refs->num_entries--;
 			if (trans->delayed_ref_updates)
 				trans->delayed_ref_updates--;
+		} else {
+			WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY ||
+				existing->type == BTRFS_SHARED_BLOCK_REF_KEY);
 		}
 	} else {
-		if (existing_ref->action == BTRFS_ADD_DELAYED_REF) {
-			/* if we're adding refs, make sure all the
-			 * details match up.  The extent could
-			 * have been totally freed and reallocated
-			 * by a different owner before the delayed
-			 * ref entries were removed.
-			 */
-			existing_ref->owner_objectid = ref->owner_objectid;
-			existing_ref->generation = ref->generation;
-			existing_ref->root = ref->root;
-			existing->num_bytes = update->num_bytes;
-		}
+		WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY ||
+			existing->type == BTRFS_SHARED_BLOCK_REF_KEY);
 		/*
 		 * the action on the existing ref matches
 		 * the action on the ref we're trying to add.
@@ -401,6 +479,7 @@ update_existing_head_ref(struct btrfs_delayed_ref_node *existing,
 
 	existing_ref = btrfs_delayed_node_to_head(existing);
 	ref = btrfs_delayed_node_to_head(update);
+	BUG_ON(existing_ref->is_data != ref->is_data);
 
 	if (ref->must_insert_reserved) {
 		/* if the extent was freed and then
@@ -420,6 +499,24 @@ update_existing_head_ref(struct btrfs_delayed_ref_node *existing,
 
 	}
 
+	if (ref->extent_op) {
+		if (!existing_ref->extent_op) {
+			existing_ref->extent_op = ref->extent_op;
+		} else {
+			if (ref->extent_op->update_key) {
+				memcpy(&existing_ref->extent_op->key,
+				       &ref->extent_op->key,
+				       sizeof(ref->extent_op->key));
+				existing_ref->extent_op->update_key = 1;
+			}
+			if (ref->extent_op->update_flags) {
+				existing_ref->extent_op->flags_to_set |=
+					ref->extent_op->flags_to_set;
+				existing_ref->extent_op->update_flags = 1;
+			}
+			kfree(ref->extent_op);
+		}
+	}
 	/*
 	 * update the reference mod on the head to reflect this new operation
 	 */
@@ -427,19 +524,16 @@ update_existing_head_ref(struct btrfs_delayed_ref_node *existing,
 }
 
 /*
- * helper function to actually insert a delayed ref into the rbtree.
+ * helper function to actually insert a head node into the rbtree.
  * this does all the dirty work in terms of maintaining the correct
- * overall modification count in the head node and properly dealing
- * with updating existing nodes as new modifications are queued.
+ * overall modification count.
  */
-static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
-			  struct btrfs_delayed_ref_node *ref,
-			  u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid, int action,
-			  int pin)
+static noinline int add_delayed_ref_head(struct btrfs_trans_handle *trans,
+					struct btrfs_delayed_ref_node *ref,
+					u64 bytenr, u64 num_bytes,
+					int action, int is_data)
 {
 	struct btrfs_delayed_ref_node *existing;
-	struct btrfs_delayed_ref *full_ref;
 	struct btrfs_delayed_ref_head *head_ref = NULL;
 	struct btrfs_delayed_ref_root *delayed_refs;
 	int count_mod = 1;
@@ -449,12 +543,10 @@ static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 	 * the head node stores the sum of all the mods, so dropping a ref
 	 * should drop the sum in the head node by one.
 	 */
-	if (parent == (u64)-1) {
-		if (action == BTRFS_DROP_DELAYED_REF)
-			count_mod = -1;
-		else if (action == BTRFS_UPDATE_DELAYED_HEAD)
-			count_mod = 0;
-	}
+	if (action == BTRFS_UPDATE_DELAYED_HEAD)
+		count_mod = 0;
+	else if (action == BTRFS_DROP_DELAYED_REF)
+		count_mod = -1;
 
 	/*
 	 * BTRFS_ADD_DELAYED_EXTENT means that we need to update
@@ -467,57 +559,148 @@ static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 	 * Once we record must_insert_reserved, switch the action to
 	 * BTRFS_ADD_DELAYED_REF because other special casing is not required.
 	 */
-	if (action == BTRFS_ADD_DELAYED_EXTENT) {
+	if (action == BTRFS_ADD_DELAYED_EXTENT)
 		must_insert_reserved = 1;
-		action = BTRFS_ADD_DELAYED_REF;
-	} else {
+	else
 		must_insert_reserved = 0;
-	}
-
 
 	delayed_refs = &trans->transaction->delayed_refs;
 
 	/* first set the basic ref node struct up */
 	atomic_set(&ref->refs, 1);
 	ref->bytenr = bytenr;
-	ref->parent = parent;
+	ref->num_bytes = num_bytes;
 	ref->ref_mod = count_mod;
+	ref->type  = 0;
+	ref->action  = 0;
+	ref->is_head = 1;
 	ref->in_tree = 1;
+
+	head_ref = btrfs_delayed_node_to_head(ref);
+	head_ref->must_insert_reserved = must_insert_reserved;
+	head_ref->is_data = is_data;
+
+	INIT_LIST_HEAD(&head_ref->cluster);
+	mutex_init(&head_ref->mutex);
+
+	existing = tree_insert(&delayed_refs->root, &ref->rb_node);
+
+	if (existing) {
+		update_existing_head_ref(existing, ref);
+		/*
+		 * we've updated the existing ref, free the newly
+		 * allocated ref
+		 */
+		kfree(ref);
+	} else {
+		delayed_refs->num_heads++;
+		delayed_refs->num_heads_ready++;
+		delayed_refs->num_entries++;
+		trans->delayed_ref_updates++;
+	}
+	return 0;
+}
+
+/*
+ * helper to insert a delayed tree ref into the rbtree.
+ */
+static noinline int add_delayed_tree_ref(struct btrfs_trans_handle *trans,
+					 struct btrfs_delayed_ref_node *ref,
+					 u64 bytenr, u64 num_bytes, u64 parent,
+					 u64 ref_root, int level, int action)
+{
+	struct btrfs_delayed_ref_node *existing;
+	struct btrfs_delayed_tree_ref *full_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+
+	if (action == BTRFS_ADD_DELAYED_EXTENT)
+		action = BTRFS_ADD_DELAYED_REF;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+
+	/* first set the basic ref node struct up */
+	atomic_set(&ref->refs, 1);
+	ref->bytenr = bytenr;
 	ref->num_bytes = num_bytes;
+	ref->ref_mod = 1;
+	ref->action = action;
+	ref->is_head = 0;
+	ref->in_tree = 1;
 
-	if (btrfs_delayed_ref_is_head(ref)) {
-		head_ref = btrfs_delayed_node_to_head(ref);
-		head_ref->must_insert_reserved = must_insert_reserved;
-		INIT_LIST_HEAD(&head_ref->cluster);
-		mutex_init(&head_ref->mutex);
+	full_ref = btrfs_delayed_node_to_tree_ref(ref);
+	if (parent) {
+		full_ref->parent = parent;
+		ref->type = BTRFS_SHARED_BLOCK_REF_KEY;
 	} else {
-		full_ref = btrfs_delayed_node_to_ref(ref);
 		full_ref->root = ref_root;
-		full_ref->generation = ref_generation;
-		full_ref->owner_objectid = owner_objectid;
-		full_ref->pin = pin;
-		full_ref->action = action;
+		ref->type = BTRFS_TREE_BLOCK_REF_KEY;
 	}
+	full_ref->level = level;
 
-	existing = tree_insert(&delayed_refs->root, bytenr,
-			       parent, &ref->rb_node);
+	existing = tree_insert(&delayed_refs->root, &ref->rb_node);
 
 	if (existing) {
-		if (btrfs_delayed_ref_is_head(ref))
-			update_existing_head_ref(existing, ref);
-		else
-			update_existing_ref(trans, delayed_refs, existing, ref);
+		update_existing_ref(trans, delayed_refs, existing, ref);
+		/*
+		 * we've updated the existing ref, free the newly
+		 * allocated ref
+		 */
+		kfree(ref);
+	} else {
+		delayed_refs->num_entries++;
+		trans->delayed_ref_updates++;
+	}
+	return 0;
+}
+
+/*
+ * helper to insert a delayed data ref into the rbtree.
+ */
+static noinline int add_delayed_data_ref(struct btrfs_trans_handle *trans,
+					 struct btrfs_delayed_ref_node *ref,
+					 u64 bytenr, u64 num_bytes, u64 parent,
+					 u64 ref_root, u64 owner, u64 offset,
+					 int action)
+{
+	struct btrfs_delayed_ref_node *existing;
+	struct btrfs_delayed_data_ref *full_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+
+	if (action == BTRFS_ADD_DELAYED_EXTENT)
+		action = BTRFS_ADD_DELAYED_REF;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+
+	/* first set the basic ref node struct up */
+	atomic_set(&ref->refs, 1);
+	ref->bytenr = bytenr;
+	ref->num_bytes = num_bytes;
+	ref->ref_mod = 1;
+	ref->action = action;
+	ref->is_head = 0;
+	ref->in_tree = 1;
+
+	full_ref = btrfs_delayed_node_to_data_ref(ref);
+	if (parent) {
+		full_ref->parent = parent;
+		ref->type = BTRFS_SHARED_DATA_REF_KEY;
+	} else {
+		full_ref->root = ref_root;
+		ref->type = BTRFS_EXTENT_DATA_REF_KEY;
+	}
+	full_ref->objectid = owner;
+	full_ref->offset = offset;
 
+	existing = tree_insert(&delayed_refs->root, &ref->rb_node);
+
+	if (existing) {
+		update_existing_ref(trans, delayed_refs, existing, ref);
 		/*
 		 * we've updated the existing ref, free the newly
 		 * allocated ref
 		 */
 		kfree(ref);
 	} else {
-		if (btrfs_delayed_ref_is_head(ref)) {
-			delayed_refs->num_heads++;
-			delayed_refs->num_heads_ready++;
-		}
 		delayed_refs->num_entries++;
 		trans->delayed_ref_updates++;
 	}
@@ -525,37 +708,78 @@ static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 }
 
 /*
- * add a delayed ref to the tree.  This does all of the accounting required
+ * add a delayed tree ref.  This does all of the accounting required
  * to make sure the delayed ref is eventually processed before this
  * transaction commits.
  */
-int btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
-			  u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid, int action,
-			  int pin)
+int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes, u64 parent,
+			       u64 ref_root,  int level, int action,
+			       struct btrfs_delayed_extent_op *extent_op)
 {
-	struct btrfs_delayed_ref *ref;
+	struct btrfs_delayed_tree_ref *ref;
 	struct btrfs_delayed_ref_head *head_ref;
 	struct btrfs_delayed_ref_root *delayed_refs;
 	int ret;
 
+	BUG_ON(extent_op && extent_op->is_data);
 	ref = kmalloc(sizeof(*ref), GFP_NOFS);
 	if (!ref)
 		return -ENOMEM;
 
+	head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS);
+	if (!head_ref) {
+		kfree(ref);
+		return -ENOMEM;
+	}
+
+	head_ref->extent_op = extent_op;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+	spin_lock(&delayed_refs->lock);
+
 	/*
-	 * the parent = 0 case comes from cases where we don't actually
-	 * know the parent yet.  It will get updated later via a add/drop
-	 * pair.
+	 * insert both the head node and the new ref without dropping
+	 * the spin lock
 	 */
-	if (parent == 0)
-		parent = bytenr;
+	ret = add_delayed_ref_head(trans, &head_ref->node, bytenr, num_bytes,
+				   action, 0);
+	BUG_ON(ret);
+
+	ret = add_delayed_tree_ref(trans, &ref->node, bytenr, num_bytes,
+				   parent, ref_root, level, action);
+	BUG_ON(ret);
+	spin_unlock(&delayed_refs->lock);
+	return 0;
+}
+
+/*
+ * add a delayed data ref. it's similar to btrfs_add_delayed_tree_ref.
+ */
+int btrfs_add_delayed_data_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes,
+			       u64 parent, u64 ref_root,
+			       u64 owner, u64 offset, int action,
+			       struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_delayed_data_ref *ref;
+	struct btrfs_delayed_ref_head *head_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+	int ret;
+
+	BUG_ON(extent_op && !extent_op->is_data);
+	ref = kmalloc(sizeof(*ref), GFP_NOFS);
+	if (!ref)
+		return -ENOMEM;
 
 	head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS);
 	if (!head_ref) {
 		kfree(ref);
 		return -ENOMEM;
 	}
+
+	head_ref->extent_op = extent_op;
+
 	delayed_refs = &trans->transaction->delayed_refs;
 	spin_lock(&delayed_refs->lock);
 
@@ -563,14 +787,39 @@ int btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 	 * insert both the head node and the new ref without dropping
 	 * the spin lock
 	 */
-	ret = __btrfs_add_delayed_ref(trans, &head_ref->node, bytenr, num_bytes,
-				      (u64)-1, 0, 0, 0, action, pin);
+	ret = add_delayed_ref_head(trans, &head_ref->node, bytenr, num_bytes,
+				   action, 1);
 	BUG_ON(ret);
 
-	ret = __btrfs_add_delayed_ref(trans, &ref->node, bytenr, num_bytes,
-				      parent, ref_root, ref_generation,
-				      owner_objectid, action, pin);
+	ret = add_delayed_data_ref(trans, &ref->node, bytenr, num_bytes,
+				   parent, ref_root, owner, offset, action);
+	BUG_ON(ret);
+	spin_unlock(&delayed_refs->lock);
+	return 0;
+}
+
+int btrfs_add_delayed_extent_op(struct btrfs_trans_handle *trans,
+				u64 bytenr, u64 num_bytes,
+				struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_delayed_ref_head *head_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+	int ret;
+
+	head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS);
+	if (!head_ref)
+		return -ENOMEM;
+
+	head_ref->extent_op = extent_op;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+	spin_lock(&delayed_refs->lock);
+
+	ret = add_delayed_ref_head(trans, &head_ref->node, bytenr,
+				   num_bytes, BTRFS_UPDATE_DELAYED_HEAD,
+				   extent_op->is_data);
 	BUG_ON(ret);
+
 	spin_unlock(&delayed_refs->lock);
 	return 0;
 }
@@ -587,7 +836,7 @@ btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr)
 	struct btrfs_delayed_ref_root *delayed_refs;
 
 	delayed_refs = &trans->transaction->delayed_refs;
-	ref = tree_search(&delayed_refs->root, bytenr, (u64)-1, NULL);
+	ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
 	if (ref)
 		return btrfs_delayed_node_to_head(ref);
 	return NULL;
@@ -603,6 +852,7 @@ btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr)
  *
  * It is the same as doing a ref add and delete in two separate calls.
  */
+#if 0
 int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
 			  u64 bytenr, u64 num_bytes, u64 orig_parent,
 			  u64 parent, u64 orig_ref_root, u64 ref_root,
@@ -666,3 +916,4 @@ int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
 	spin_unlock(&delayed_refs->lock);
 	return 0;
 }
+#endif
diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h
index 3bec2ff0b15..f6fc67ddad3 100644
--- a/fs/btrfs/delayed-ref.h
+++ b/fs/btrfs/delayed-ref.h
@@ -30,9 +30,6 @@ struct btrfs_delayed_ref_node {
 	/* the starting bytenr of the extent */
 	u64 bytenr;
 
-	/* the parent our backref will point to */
-	u64 parent;
-
 	/* the size of the extent */
 	u64 num_bytes;
 
@@ -50,10 +47,21 @@ struct btrfs_delayed_ref_node {
 	 */
 	int ref_mod;
 
+	unsigned int action:8;
+	unsigned int type:8;
 	/* is this node still in the rbtree? */
+	unsigned int is_head:1;
 	unsigned int in_tree:1;
 };
 
+struct btrfs_delayed_extent_op {
+	struct btrfs_disk_key key;
+	u64 flags_to_set;
+	unsigned int update_key:1;
+	unsigned int update_flags:1;
+	unsigned int is_data:1;
+};
+
 /*
  * the head refs are used to hold a lock on a given extent, which allows us
  * to make sure that only one process is running the delayed refs
@@ -71,6 +79,7 @@ struct btrfs_delayed_ref_head {
 
 	struct list_head cluster;
 
+	struct btrfs_delayed_extent_op *extent_op;
 	/*
 	 * when a new extent is allocated, it is just reserved in memory
 	 * The actual extent isn't inserted into the extent allocation tree
@@ -84,27 +93,26 @@ struct btrfs_delayed_ref_head {
 	 * the free has happened.
 	 */
 	unsigned int must_insert_reserved:1;
+	unsigned int is_data:1;
 };
 
-struct btrfs_delayed_ref {
+struct btrfs_delayed_tree_ref {
 	struct btrfs_delayed_ref_node node;
+	union {
+		u64 root;
+		u64 parent;
+	};
+	int level;
+};
 
-	/* the root objectid our ref will point to */
-	u64 root;
-
-	/* the generation for the backref */
-	u64 generation;
-
-	/* owner_objectid of the backref  */
-	u64 owner_objectid;
-
-	/* operation done by this entry in the rbtree */
-	u8 action;
-
-	/* if pin == 1, when the extent is freed it will be pinned until
-	 * transaction commit
-	 */
-	unsigned int pin:1;
+struct btrfs_delayed_data_ref {
+	struct btrfs_delayed_ref_node node;
+	union {
+		u64 root;
+		u64 parent;
+	};
+	u64 objectid;
+	u64 offset;
 };
 
 struct btrfs_delayed_ref_root {
@@ -143,17 +151,25 @@ static inline void btrfs_put_delayed_ref(struct btrfs_delayed_ref_node *ref)
 	}
 }
 
-int btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
-			  u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid, int action,
-			  int pin);
+int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes, u64 parent,
+			       u64 ref_root, int level, int action,
+			       struct btrfs_delayed_extent_op *extent_op);
+int btrfs_add_delayed_data_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes,
+			       u64 parent, u64 ref_root,
+			       u64 owner, u64 offset, int action,
+			       struct btrfs_delayed_extent_op *extent_op);
+int btrfs_add_delayed_extent_op(struct btrfs_trans_handle *trans,
+				u64 bytenr, u64 num_bytes,
+				struct btrfs_delayed_extent_op *extent_op);
 
 struct btrfs_delayed_ref_head *
 btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr);
 int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr);
-int btrfs_lookup_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr,
-			    u64 num_bytes, u32 *refs);
+int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root, u64 bytenr,
+			     u64 num_bytes, u64 *refs, u64 *flags);
 int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
 			  u64 bytenr, u64 num_bytes, u64 orig_parent,
 			  u64 parent, u64 orig_ref_root, u64 ref_root,
@@ -169,18 +185,24 @@ int btrfs_find_ref_cluster(struct btrfs_trans_handle *trans,
  */
 static int btrfs_delayed_ref_is_head(struct btrfs_delayed_ref_node *node)
 {
-	return node->parent == (u64)-1;
+	return node->is_head;
 }
 
 /*
  * helper functions to cast a node into its container
  */
-static inline struct btrfs_delayed_ref *
-btrfs_delayed_node_to_ref(struct btrfs_delayed_ref_node *node)
+static inline struct btrfs_delayed_tree_ref *
+btrfs_delayed_node_to_tree_ref(struct btrfs_delayed_ref_node *node)
 {
 	WARN_ON(btrfs_delayed_ref_is_head(node));
-	return container_of(node, struct btrfs_delayed_ref, node);
+	return container_of(node, struct btrfs_delayed_tree_ref, node);
+}
 
+static inline struct btrfs_delayed_data_ref *
+btrfs_delayed_node_to_data_ref(struct btrfs_delayed_ref_node *node)
+{
+	WARN_ON(btrfs_delayed_ref_is_head(node));
+	return container_of(node, struct btrfs_delayed_data_ref, node);
 }
 
 static inline struct btrfs_delayed_ref_head *
@@ -188,6 +210,5 @@ btrfs_delayed_node_to_head(struct btrfs_delayed_ref_node *node)
 {
 	WARN_ON(!btrfs_delayed_ref_is_head(node));
 	return container_of(node, struct btrfs_delayed_ref_head, node);
-
 }
 #endif
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 4b0ea0b80c2..d28d29c95f7 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -26,8 +26,8 @@
 #include <linux/workqueue.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/crc32c.h>
 #include "compat.h"
-#include "crc32c.h"
 #include "ctree.h"
 #include "disk-io.h"
 #include "transaction.h"
@@ -36,13 +36,14 @@
 #include "print-tree.h"
 #include "async-thread.h"
 #include "locking.h"
-#include "ref-cache.h"
 #include "tree-log.h"
 #include "free-space-cache.h"
 
 static struct extent_io_ops btree_extent_io_ops;
 static void end_workqueue_fn(struct btrfs_work *work);
 
+static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
+
 /*
  * end_io_wq structs are used to do processing in task context when an IO is
  * complete.  This is used during reads to verify checksums, and it is used
@@ -172,7 +173,7 @@ out:
 
 u32 btrfs_csum_data(struct btrfs_root *root, char *data, u32 seed, size_t len)
 {
-	return btrfs_crc32c(seed, data, len);
+	return crc32c(seed, data, len);
 }
 
 void btrfs_csum_final(u32 crc, char *result)
@@ -884,7 +885,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 {
 	root->node = NULL;
 	root->commit_root = NULL;
-	root->ref_tree = NULL;
 	root->sectorsize = sectorsize;
 	root->nodesize = nodesize;
 	root->leafsize = leafsize;
@@ -899,12 +899,14 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 	root->last_inode_alloc = 0;
 	root->name = NULL;
 	root->in_sysfs = 0;
+	root->inode_tree.rb_node = NULL;
 
 	INIT_LIST_HEAD(&root->dirty_list);
 	INIT_LIST_HEAD(&root->orphan_list);
-	INIT_LIST_HEAD(&root->dead_list);
+	INIT_LIST_HEAD(&root->root_list);
 	spin_lock_init(&root->node_lock);
 	spin_lock_init(&root->list_lock);
+	spin_lock_init(&root->inode_lock);
 	mutex_init(&root->objectid_mutex);
 	mutex_init(&root->log_mutex);
 	init_waitqueue_head(&root->log_writer_wait);
@@ -918,9 +920,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 	extent_io_tree_init(&root->dirty_log_pages,
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
 
-	btrfs_leaf_ref_tree_init(&root->ref_tree_struct);
-	root->ref_tree = &root->ref_tree_struct;
-
 	memset(&root->root_key, 0, sizeof(root->root_key));
 	memset(&root->root_item, 0, sizeof(root->root_item));
 	memset(&root->defrag_progress, 0, sizeof(root->defrag_progress));
@@ -959,6 +958,7 @@ static int find_and_setup_root(struct btrfs_root *tree_root,
 	blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
 	root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
 				     blocksize, generation);
+	root->commit_root = btrfs_root_node(root);
 	BUG_ON(!root->node);
 	return 0;
 }
@@ -1025,20 +1025,19 @@ static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
 	 */
 	root->ref_cows = 0;
 
-	leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
-				      0, BTRFS_TREE_LOG_OBJECTID,
-				      trans->transid, 0, 0, 0);
+	leaf = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
+				      BTRFS_TREE_LOG_OBJECTID, NULL, 0, 0, 0);
 	if (IS_ERR(leaf)) {
 		kfree(root);
 		return ERR_CAST(leaf);
 	}
 
+	memset_extent_buffer(leaf, 0, 0, sizeof(struct btrfs_header));
+	btrfs_set_header_bytenr(leaf, leaf->start);
+	btrfs_set_header_generation(leaf, trans->transid);
+	btrfs_set_header_backref_rev(leaf, BTRFS_MIXED_BACKREF_REV);
+	btrfs_set_header_owner(leaf, BTRFS_TREE_LOG_OBJECTID);
 	root->node = leaf;
-	btrfs_set_header_nritems(root->node, 0);
-	btrfs_set_header_level(root->node, 0);
-	btrfs_set_header_bytenr(root->node, root->node->start);
-	btrfs_set_header_generation(root->node, trans->transid);
-	btrfs_set_header_owner(root->node, BTRFS_TREE_LOG_OBJECTID);
 
 	write_extent_buffer(root->node, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(root->node),
@@ -1081,8 +1080,7 @@ int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
 	inode_item->nbytes = cpu_to_le64(root->leafsize);
 	inode_item->mode = cpu_to_le32(S_IFDIR | 0755);
 
-	btrfs_set_root_bytenr(&log_root->root_item, log_root->node->start);
-	btrfs_set_root_generation(&log_root->root_item, trans->transid);
+	btrfs_set_root_node(&log_root->root_item, log_root->node);
 
 	WARN_ON(root->log_root);
 	root->log_root = log_root;
@@ -1144,6 +1142,7 @@ out:
 	blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
 	root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
 				     blocksize, generation);
+	root->commit_root = btrfs_root_node(root);
 	BUG_ON(!root->node);
 insert:
 	if (location->objectid != BTRFS_TREE_LOG_OBJECTID) {
@@ -1210,7 +1209,7 @@ struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info,
 	}
 	if (!(fs_info->sb->s_flags & MS_RDONLY)) {
 		ret = btrfs_find_dead_roots(fs_info->tree_root,
-					    root->root_key.objectid, root);
+					    root->root_key.objectid);
 		BUG_ON(ret);
 		btrfs_orphan_cleanup(root);
 	}
@@ -1345,12 +1344,25 @@ static void btrfs_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
 	free_extent_map(em);
 }
 
+/*
+ * If this fails, caller must call bdi_destroy() to get rid of the
+ * bdi again.
+ */
 static int setup_bdi(struct btrfs_fs_info *info, struct backing_dev_info *bdi)
 {
-	bdi_init(bdi);
+	int err;
+
+	bdi->capabilities = BDI_CAP_MAP_COPY;
+	err = bdi_init(bdi);
+	if (err)
+		return err;
+
+	err = bdi_register(bdi, NULL, "btrfs-%d",
+				atomic_inc_return(&btrfs_bdi_num));
+	if (err)
+		return err;
+
 	bdi->ra_pages	= default_backing_dev_info.ra_pages;
-	bdi->state		= 0;
-	bdi->capabilities	= default_backing_dev_info.capabilities;
 	bdi->unplug_io_fn	= btrfs_unplug_io_fn;
 	bdi->unplug_io_data	= info;
 	bdi->congested_fn	= btrfs_congested_fn;
@@ -1569,12 +1581,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	atomic_set(&fs_info->async_delalloc_pages, 0);
 	atomic_set(&fs_info->async_submit_draining, 0);
 	atomic_set(&fs_info->nr_async_bios, 0);
-	atomic_set(&fs_info->throttles, 0);
-	atomic_set(&fs_info->throttle_gen, 0);
 	fs_info->sb = sb;
 	fs_info->max_extent = (u64)-1;
 	fs_info->max_inline = 8192 * 1024;
-	setup_bdi(fs_info, &fs_info->bdi);
+	if (setup_bdi(fs_info, &fs_info->bdi))
+		goto fail_bdi;
 	fs_info->btree_inode = new_inode(sb);
 	fs_info->btree_inode->i_ino = 1;
 	fs_info->btree_inode->i_nlink = 1;
@@ -1598,6 +1609,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->btree_inode->i_mapping->a_ops = &btree_aops;
 	fs_info->btree_inode->i_mapping->backing_dev_info = &fs_info->bdi;
 
+	RB_CLEAR_NODE(&BTRFS_I(fs_info->btree_inode)->rb_node);
 	extent_io_tree_init(&BTRFS_I(fs_info->btree_inode)->io_tree,
 			     fs_info->btree_inode->i_mapping,
 			     GFP_NOFS);
@@ -1613,10 +1625,6 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
 	fs_info->do_barriers = 1;
 
-	INIT_LIST_HEAD(&fs_info->dead_reloc_roots);
-	btrfs_leaf_ref_tree_init(&fs_info->reloc_ref_tree);
-	btrfs_leaf_ref_tree_init(&fs_info->shared_ref_tree);
-
 	BTRFS_I(fs_info->btree_inode)->root = tree_root;
 	memset(&BTRFS_I(fs_info->btree_inode)->location, 0,
 	       sizeof(struct btrfs_key));
@@ -1674,6 +1682,12 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 		goto fail_iput;
 	}
 
+	features = btrfs_super_incompat_flags(disk_super);
+	if (!(features & BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF)) {
+		features |= BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF;
+		btrfs_set_super_incompat_flags(disk_super, features);
+	}
+
 	features = btrfs_super_compat_ro_flags(disk_super) &
 		~BTRFS_FEATURE_COMPAT_RO_SUPP;
 	if (!(sb->s_flags & MS_RDONLY) && features) {
@@ -1771,7 +1785,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	if (ret) {
 		printk(KERN_WARNING "btrfs: failed to read the system "
 		       "array on %s\n", sb->s_id);
-		goto fail_sys_array;
+		goto fail_sb_buffer;
 	}
 
 	blocksize = btrfs_level_size(tree_root,
@@ -1785,6 +1799,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					   btrfs_super_chunk_root(disk_super),
 					   blocksize, generation);
 	BUG_ON(!chunk_root->node);
+	btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
+	chunk_root->commit_root = btrfs_root_node(chunk_root);
 
 	read_extent_buffer(chunk_root->node, fs_info->chunk_tree_uuid,
 	   (unsigned long)btrfs_header_chunk_tree_uuid(chunk_root->node),
@@ -1810,7 +1826,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					  blocksize, generation);
 	if (!tree_root->node)
 		goto fail_chunk_root;
-
+	btrfs_set_root_node(&tree_root->root_item, tree_root->node);
+	tree_root->commit_root = btrfs_root_node(tree_root);
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_EXTENT_TREE_OBJECTID, extent_root);
@@ -1820,14 +1837,14 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_DEV_TREE_OBJECTID, dev_root);
-	dev_root->track_dirty = 1;
 	if (ret)
 		goto fail_extent_root;
+	dev_root->track_dirty = 1;
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_CSUM_TREE_OBJECTID, csum_root);
 	if (ret)
-		goto fail_extent_root;
+		goto fail_dev_root;
 
 	csum_root->track_dirty = 1;
 
@@ -1849,6 +1866,14 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	if (IS_ERR(fs_info->transaction_kthread))
 		goto fail_cleaner;
 
+	if (!btrfs_test_opt(tree_root, SSD) &&
+	    !btrfs_test_opt(tree_root, NOSSD) &&
+	    !fs_info->fs_devices->rotating) {
+		printk(KERN_INFO "Btrfs detected SSD devices, enabling SSD "
+		       "mode\n");
+		btrfs_set_opt(fs_info->mount_opt, SSD);
+	}
+
 	if (btrfs_super_log_root(disk_super) != 0) {
 		u64 bytenr = btrfs_super_log_root(disk_super);
 
@@ -1881,7 +1906,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	}
 
 	if (!(sb->s_flags & MS_RDONLY)) {
-		ret = btrfs_cleanup_reloc_trees(tree_root);
+		ret = btrfs_recover_relocation(tree_root);
 		BUG_ON(ret);
 	}
 
@@ -1892,6 +1917,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->fs_root = btrfs_read_fs_root_no_name(fs_info, &location);
 	if (!fs_info->fs_root)
 		goto fail_trans_kthread;
+
 	return tree_root;
 
 fail_trans_kthread:
@@ -1908,14 +1934,19 @@ fail_cleaner:
 
 fail_csum_root:
 	free_extent_buffer(csum_root->node);
+	free_extent_buffer(csum_root->commit_root);
+fail_dev_root:
+	free_extent_buffer(dev_root->node);
+	free_extent_buffer(dev_root->commit_root);
 fail_extent_root:
 	free_extent_buffer(extent_root->node);
+	free_extent_buffer(extent_root->commit_root);
 fail_tree_root:
 	free_extent_buffer(tree_root->node);
+	free_extent_buffer(tree_root->commit_root);
 fail_chunk_root:
 	free_extent_buffer(chunk_root->node);
-fail_sys_array:
-	free_extent_buffer(dev_root->node);
+	free_extent_buffer(chunk_root->commit_root);
 fail_sb_buffer:
 	btrfs_stop_workers(&fs_info->fixup_workers);
 	btrfs_stop_workers(&fs_info->delalloc_workers);
@@ -1931,8 +1962,8 @@ fail_iput:
 
 	btrfs_close_devices(fs_info->fs_devices);
 	btrfs_mapping_tree_free(&fs_info->mapping_tree);
+fail_bdi:
 	bdi_destroy(&fs_info->bdi);
-
 fail:
 	kfree(extent_root);
 	kfree(tree_root);
@@ -2005,6 +2036,17 @@ struct buffer_head *btrfs_read_dev_super(struct block_device *bdev)
 	return latest;
 }
 
+/*
+ * this should be called twice, once with wait == 0 and
+ * once with wait == 1.  When wait == 0 is done, all the buffer heads
+ * we write are pinned.
+ *
+ * They are released when wait == 1 is done.
+ * max_mirrors must be the same for both runs, and it indicates how
+ * many supers on this one device should be written.
+ *
+ * max_mirrors == 0 means to write them all.
+ */
 static int write_dev_supers(struct btrfs_device *device,
 			    struct btrfs_super_block *sb,
 			    int do_barriers, int wait, int max_mirrors)
@@ -2040,12 +2082,16 @@ static int write_dev_supers(struct btrfs_device *device,
 			bh = __find_get_block(device->bdev, bytenr / 4096,
 					      BTRFS_SUPER_INFO_SIZE);
 			BUG_ON(!bh);
-			brelse(bh);
 			wait_on_buffer(bh);
-			if (buffer_uptodate(bh)) {
-				brelse(bh);
-				continue;
-			}
+			if (!buffer_uptodate(bh))
+				errors++;
+
+			/* drop our reference */
+			brelse(bh);
+
+			/* drop the reference from the wait == 0 run */
+			brelse(bh);
+			continue;
 		} else {
 			btrfs_set_super_bytenr(sb, bytenr);
 
@@ -2056,12 +2102,18 @@ static int write_dev_supers(struct btrfs_device *device,
 					      BTRFS_CSUM_SIZE);
 			btrfs_csum_final(crc, sb->csum);
 
+			/*
+			 * one reference for us, and we leave it for the
+			 * caller
+			 */
 			bh = __getblk(device->bdev, bytenr / 4096,
 				      BTRFS_SUPER_INFO_SIZE);
 			memcpy(bh->b_data, sb, BTRFS_SUPER_INFO_SIZE);
 
-			set_buffer_uptodate(bh);
+			/* one reference for submit_bh */
 			get_bh(bh);
+
+			set_buffer_uptodate(bh);
 			lock_buffer(bh);
 			bh->b_end_io = btrfs_end_buffer_write_sync;
 		}
@@ -2073,6 +2125,7 @@ static int write_dev_supers(struct btrfs_device *device,
 				       device->name);
 				set_buffer_uptodate(bh);
 				device->barriers = 0;
+				/* one reference for submit_bh */
 				get_bh(bh);
 				lock_buffer(bh);
 				ret = submit_bh(WRITE_SYNC, bh);
@@ -2081,22 +2134,15 @@ static int write_dev_supers(struct btrfs_device *device,
 			ret = submit_bh(WRITE_SYNC, bh);
 		}
 
-		if (!ret && wait) {
-			wait_on_buffer(bh);
-			if (!buffer_uptodate(bh))
-				errors++;
-		} else if (ret) {
+		if (ret)
 			errors++;
-		}
-		if (wait)
-			brelse(bh);
 	}
 	return errors < i ? 0 : -1;
 }
 
 int write_all_supers(struct btrfs_root *root, int max_mirrors)
 {
-	struct list_head *head = &root->fs_info->fs_devices->devices;
+	struct list_head *head;
 	struct btrfs_device *dev;
 	struct btrfs_super_block *sb;
 	struct btrfs_dev_item *dev_item;
@@ -2111,6 +2157,9 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors)
 
 	sb = &root->fs_info->super_for_commit;
 	dev_item = &sb->dev_item;
+
+	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
+	head = &root->fs_info->fs_devices->devices;
 	list_for_each_entry(dev, head, dev_list) {
 		if (!dev->bdev) {
 			total_errors++;
@@ -2154,6 +2203,7 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors)
 		if (ret)
 			total_errors++;
 	}
+	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 	if (total_errors > max_errors) {
 		printk(KERN_ERR "btrfs: %d errors while writing supers\n",
 		       total_errors);
@@ -2173,6 +2223,7 @@ int write_ctree_super(struct btrfs_trans_handle *trans,
 
 int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root)
 {
+	WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
 	radix_tree_delete(&fs_info->fs_roots_radix,
 			  (unsigned long)root->root_key.objectid);
 	if (root->anon_super.s_dev) {
@@ -2219,10 +2270,12 @@ int btrfs_cleanup_fs_roots(struct btrfs_fs_info *fs_info)
 					     ARRAY_SIZE(gang));
 		if (!ret)
 			break;
+
+		root_objectid = gang[ret - 1]->root_key.objectid + 1;
 		for (i = 0; i < ret; i++) {
 			root_objectid = gang[i]->root_key.objectid;
 			ret = btrfs_find_dead_roots(fs_info->tree_root,
-						    root_objectid, gang[i]);
+						    root_objectid);
 			BUG_ON(ret);
 			btrfs_orphan_cleanup(gang[i]);
 		}
@@ -2278,20 +2331,16 @@ int close_ctree(struct btrfs_root *root)
 		       (unsigned long long)fs_info->total_ref_cache_size);
 	}
 
-	if (fs_info->extent_root->node)
-		free_extent_buffer(fs_info->extent_root->node);
-
-	if (fs_info->tree_root->node)
-		free_extent_buffer(fs_info->tree_root->node);
-
-	if (root->fs_info->chunk_root->node)
-		free_extent_buffer(root->fs_info->chunk_root->node);
-
-	if (root->fs_info->dev_root->node)
-		free_extent_buffer(root->fs_info->dev_root->node);
-
-	if (root->fs_info->csum_root->node)
-		free_extent_buffer(root->fs_info->csum_root->node);
+	free_extent_buffer(fs_info->extent_root->node);
+	free_extent_buffer(fs_info->extent_root->commit_root);
+	free_extent_buffer(fs_info->tree_root->node);
+	free_extent_buffer(fs_info->tree_root->commit_root);
+	free_extent_buffer(root->fs_info->chunk_root->node);
+	free_extent_buffer(root->fs_info->chunk_root->commit_root);
+	free_extent_buffer(root->fs_info->dev_root->node);
+	free_extent_buffer(root->fs_info->dev_root->commit_root);
+	free_extent_buffer(root->fs_info->csum_root->node);
+	free_extent_buffer(root->fs_info->csum_root->commit_root);
 
 	btrfs_free_block_groups(root->fs_info);
 
@@ -2373,17 +2422,14 @@ void btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr)
 	 * looks as though older kernels can get into trouble with
 	 * this code, they end up stuck in balance_dirty_pages forever
 	 */
-	struct extent_io_tree *tree;
 	u64 num_dirty;
-	u64 start = 0;
 	unsigned long thresh = 32 * 1024 * 1024;
-	tree = &BTRFS_I(root->fs_info->btree_inode)->io_tree;
 
 	if (current->flags & PF_MEMALLOC)
 		return;
 
-	num_dirty = count_range_bits(tree, &start, (u64)-1,
-				     thresh, EXTENT_DIRTY);
+	num_dirty = root->fs_info->dirty_metadata_bytes;
+
 	if (num_dirty > thresh) {
 		balance_dirty_pages_ratelimited_nr(
 				   root->fs_info->btree_inode->i_mapping, 1);
diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index 85315d2c90d..9596b40caa4 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -78,7 +78,7 @@ static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
 	btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
 	key.offset = 0;
 
-	inode = btrfs_iget(sb, &key, root, NULL);
+	inode = btrfs_iget(sb, &key, root);
 	if (IS_ERR(inode))
 		return (void *)inode;
 
@@ -192,7 +192,7 @@ static struct dentry *btrfs_get_parent(struct dentry *child)
 	btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
 	key.offset = 0;
 
-	return d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root, NULL));
+	return d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
 }
 
 const struct export_operations btrfs_export_ops = {
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 35af9335506..edc7d208c5c 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -23,50 +23,39 @@
 #include <linux/rcupdate.h>
 #include "compat.h"
 #include "hash.h"
-#include "crc32c.h"
 #include "ctree.h"
 #include "disk-io.h"
 #include "print-tree.h"
 #include "transaction.h"
 #include "volumes.h"
 #include "locking.h"
-#include "ref-cache.h"
 #include "free-space-cache.h"
 
-#define PENDING_EXTENT_INSERT 0
-#define PENDING_EXTENT_DELETE 1
-#define PENDING_BACKREF_UPDATE 2
-
-struct pending_extent_op {
-	int type;
-	u64 bytenr;
-	u64 num_bytes;
-	u64 parent;
-	u64 orig_parent;
-	u64 generation;
-	u64 orig_generation;
-	int level;
-	struct list_head list;
-	int del;
-};
-
-static int __btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-					 struct btrfs_root *root, u64 parent,
-					 u64 root_objectid, u64 ref_generation,
-					 u64 owner, struct btrfs_key *ins,
-					 int ref_mod);
 static int update_reserved_extents(struct btrfs_root *root,
 				   u64 bytenr, u64 num, int reserve);
 static int update_block_group(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *root,
 			      u64 bytenr, u64 num_bytes, int alloc,
 			      int mark_free);
-static noinline int __btrfs_free_extent(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					u64 bytenr, u64 num_bytes, u64 parent,
-					u64 root_objectid, u64 ref_generation,
-					u64 owner_objectid, int pin,
-					int ref_to_drop);
+static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 parent,
+				u64 root_objectid, u64 owner_objectid,
+				u64 owner_offset, int refs_to_drop,
+				struct btrfs_delayed_extent_op *extra_op);
+static void __run_delayed_extent_op(struct btrfs_delayed_extent_op *extent_op,
+				    struct extent_buffer *leaf,
+				    struct btrfs_extent_item *ei);
+static int alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *root,
+				      u64 parent, u64 root_objectid,
+				      u64 flags, u64 owner, u64 offset,
+				      struct btrfs_key *ins, int ref_mod);
+static int alloc_reserved_tree_block(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 parent, u64 root_objectid,
+				     u64 flags, struct btrfs_disk_key *key,
+				     int level, struct btrfs_key *ins);
 
 static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *extent_root, u64 alloc_bytes,
@@ -453,199 +442,969 @@ int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len)
  *    maintenance.  This is actually the same as #2, but with a slightly
  *    different use case.
  *
+ * There are two kinds of back refs. The implicit back refs is optimized
+ * for pointers in non-shared tree blocks. For a given pointer in a block,
+ * back refs of this kind provide information about the block's owner tree
+ * and the pointer's key. These information allow us to find the block by
+ * b-tree searching. The full back refs is for pointers in tree blocks not
+ * referenced by their owner trees. The location of tree block is recorded
+ * in the back refs. Actually the full back refs is generic, and can be
+ * used in all cases the implicit back refs is used. The major shortcoming
+ * of the full back refs is its overhead. Every time a tree block gets
+ * COWed, we have to update back refs entry for all pointers in it.
+ *
+ * For a newly allocated tree block, we use implicit back refs for
+ * pointers in it. This means most tree related operations only involve
+ * implicit back refs. For a tree block created in old transaction, the
+ * only way to drop a reference to it is COW it. So we can detect the
+ * event that tree block loses its owner tree's reference and do the
+ * back refs conversion.
+ *
+ * When a tree block is COW'd through a tree, there are four cases:
+ *
+ * The reference count of the block is one and the tree is the block's
+ * owner tree. Nothing to do in this case.
+ *
+ * The reference count of the block is one and the tree is not the
+ * block's owner tree. In this case, full back refs is used for pointers
+ * in the block. Remove these full back refs, add implicit back refs for
+ * every pointers in the new block.
+ *
+ * The reference count of the block is greater than one and the tree is
+ * the block's owner tree. In this case, implicit back refs is used for
+ * pointers in the block. Add full back refs for every pointers in the
+ * block, increase lower level extents' reference counts. The original
+ * implicit back refs are entailed to the new block.
+ *
+ * The reference count of the block is greater than one and the tree is
+ * not the block's owner tree. Add implicit back refs for every pointer in
+ * the new block, increase lower level extents' reference count.
+ *
+ * Back Reference Key composing:
+ *
+ * The key objectid corresponds to the first byte in the extent,
+ * The key type is used to differentiate between types of back refs.
+ * There are different meanings of the key offset for different types
+ * of back refs.
+ *
  * File extents can be referenced by:
  *
  * - multiple snapshots, subvolumes, or different generations in one subvol
  * - different files inside a single subvolume
  * - different offsets inside a file (bookend extents in file.c)
  *
- * The extent ref structure has fields for:
+ * The extent ref structure for the implicit back refs has fields for:
  *
  * - Objectid of the subvolume root
- * - Generation number of the tree holding the reference
  * - objectid of the file holding the reference
- * - number of references holding by parent node (alway 1 for tree blocks)
- *
- * Btree leaf may hold multiple references to a file extent. In most cases,
- * these references are from same file and the corresponding offsets inside
- * the file are close together.
- *
- * When a file extent is allocated the fields are filled in:
- *     (root_key.objectid, trans->transid, inode objectid, 1)
+ * - original offset in the file
+ * - how many bookend extents
  *
- * When a leaf is cow'd new references are added for every file extent found
- * in the leaf.  It looks similar to the create case, but trans->transid will
- * be different when the block is cow'd.
+ * The key offset for the implicit back refs is hash of the first
+ * three fields.
  *
- *     (root_key.objectid, trans->transid, inode objectid,
- *      number of references in the leaf)
+ * The extent ref structure for the full back refs has field for:
  *
- * When a file extent is removed either during snapshot deletion or
- * file truncation, we find the corresponding back reference and check
- * the following fields:
+ * - number of pointers in the tree leaf
  *
- *     (btrfs_header_owner(leaf), btrfs_header_generation(leaf),
- *      inode objectid)
+ * The key offset for the implicit back refs is the first byte of
+ * the tree leaf
  *
- * Btree extents can be referenced by:
- *
- * - Different subvolumes
- * - Different generations of the same subvolume
- *
- * When a tree block is created, back references are inserted:
+ * When a file extent is allocated, The implicit back refs is used.
+ * the fields are filled in:
  *
- * (root->root_key.objectid, trans->transid, level, 1)
+ *     (root_key.objectid, inode objectid, offset in file, 1)
  *
- * When a tree block is cow'd, new back references are added for all the
- * blocks it points to. If the tree block isn't in reference counted root,
- * the old back references are removed. These new back references are of
- * the form (trans->transid will have increased since creation):
+ * When a file extent is removed file truncation, we find the
+ * corresponding implicit back refs and check the following fields:
  *
- * (root->root_key.objectid, trans->transid, level, 1)
+ *     (btrfs_header_owner(leaf), inode objectid, offset in file)
  *
- * When a backref is in deleting, the following fields are checked:
+ * Btree extents can be referenced by:
  *
- * if backref was for a tree root:
- *     (btrfs_header_owner(itself), btrfs_header_generation(itself), level)
- * else
- *     (btrfs_header_owner(parent), btrfs_header_generation(parent), level)
+ * - Different subvolumes
  *
- * Back Reference Key composing:
+ * Both the implicit back refs and the full back refs for tree blocks
+ * only consist of key. The key offset for the implicit back refs is
+ * objectid of block's owner tree. The key offset for the full back refs
+ * is the first byte of parent block.
  *
- * The key objectid corresponds to the first byte in the extent, the key
- * type is set to BTRFS_EXTENT_REF_KEY, and the key offset is the first
- * byte of parent extent. If a extent is tree root, the key offset is set
- * to the key objectid.
+ * When implicit back refs is used, information about the lowest key and
+ * level of the tree block are required. These information are stored in
+ * tree block info structure.
  */
 
-static noinline int lookup_extent_backref(struct btrfs_trans_handle *trans,
-					  struct btrfs_root *root,
-					  struct btrfs_path *path,
-					  u64 bytenr, u64 parent,
-					  u64 ref_root, u64 ref_generation,
-					  u64 owner_objectid, int del)
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static int convert_extent_item_v0(struct btrfs_trans_handle *trans,
+				  struct btrfs_root *root,
+				  struct btrfs_path *path,
+				  u64 owner, u32 extra_size)
 {
+	struct btrfs_extent_item *item;
+	struct btrfs_extent_item_v0 *ei0;
+	struct btrfs_extent_ref_v0 *ref0;
+	struct btrfs_tree_block_info *bi;
+	struct extent_buffer *leaf;
 	struct btrfs_key key;
-	struct btrfs_extent_ref *ref;
+	struct btrfs_key found_key;
+	u32 new_size = sizeof(*item);
+	u64 refs;
+	int ret;
+
+	leaf = path->nodes[0];
+	BUG_ON(btrfs_item_size_nr(leaf, path->slots[0]) != sizeof(*ei0));
+
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+	ei0 = btrfs_item_ptr(leaf, path->slots[0],
+			     struct btrfs_extent_item_v0);
+	refs = btrfs_extent_refs_v0(leaf, ei0);
+
+	if (owner == (u64)-1) {
+		while (1) {
+			if (path->slots[0] >= btrfs_header_nritems(leaf)) {
+				ret = btrfs_next_leaf(root, path);
+				if (ret < 0)
+					return ret;
+				BUG_ON(ret > 0);
+				leaf = path->nodes[0];
+			}
+			btrfs_item_key_to_cpu(leaf, &found_key,
+					      path->slots[0]);
+			BUG_ON(key.objectid != found_key.objectid);
+			if (found_key.type != BTRFS_EXTENT_REF_V0_KEY) {
+				path->slots[0]++;
+				continue;
+			}
+			ref0 = btrfs_item_ptr(leaf, path->slots[0],
+					      struct btrfs_extent_ref_v0);
+			owner = btrfs_ref_objectid_v0(leaf, ref0);
+			break;
+		}
+	}
+	btrfs_release_path(root, path);
+
+	if (owner < BTRFS_FIRST_FREE_OBJECTID)
+		new_size += sizeof(*bi);
+
+	new_size -= sizeof(*ei0);
+	ret = btrfs_search_slot(trans, root, &key, path,
+				new_size + extra_size, 1);
+	if (ret < 0)
+		return ret;
+	BUG_ON(ret);
+
+	ret = btrfs_extend_item(trans, root, path, new_size);
+	BUG_ON(ret);
+
+	leaf = path->nodes[0];
+	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	btrfs_set_extent_refs(leaf, item, refs);
+	/* FIXME: get real generation */
+	btrfs_set_extent_generation(leaf, item, 0);
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		btrfs_set_extent_flags(leaf, item,
+				       BTRFS_EXTENT_FLAG_TREE_BLOCK |
+				       BTRFS_BLOCK_FLAG_FULL_BACKREF);
+		bi = (struct btrfs_tree_block_info *)(item + 1);
+		/* FIXME: get first key of the block */
+		memset_extent_buffer(leaf, 0, (unsigned long)bi, sizeof(*bi));
+		btrfs_set_tree_block_level(leaf, bi, (int)owner);
+	} else {
+		btrfs_set_extent_flags(leaf, item, BTRFS_EXTENT_FLAG_DATA);
+	}
+	btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+#endif
+
+static u64 hash_extent_data_ref(u64 root_objectid, u64 owner, u64 offset)
+{
+	u32 high_crc = ~(u32)0;
+	u32 low_crc = ~(u32)0;
+	__le64 lenum;
+
+	lenum = cpu_to_le64(root_objectid);
+	high_crc = crc32c(high_crc, &lenum, sizeof(lenum));
+	lenum = cpu_to_le64(owner);
+	low_crc = crc32c(low_crc, &lenum, sizeof(lenum));
+	lenum = cpu_to_le64(offset);
+	low_crc = crc32c(low_crc, &lenum, sizeof(lenum));
+
+	return ((u64)high_crc << 31) ^ (u64)low_crc;
+}
+
+static u64 hash_extent_data_ref_item(struct extent_buffer *leaf,
+				     struct btrfs_extent_data_ref *ref)
+{
+	return hash_extent_data_ref(btrfs_extent_data_ref_root(leaf, ref),
+				    btrfs_extent_data_ref_objectid(leaf, ref),
+				    btrfs_extent_data_ref_offset(leaf, ref));
+}
+
+static int match_extent_data_ref(struct extent_buffer *leaf,
+				 struct btrfs_extent_data_ref *ref,
+				 u64 root_objectid, u64 owner, u64 offset)
+{
+	if (btrfs_extent_data_ref_root(leaf, ref) != root_objectid ||
+	    btrfs_extent_data_ref_objectid(leaf, ref) != owner ||
+	    btrfs_extent_data_ref_offset(leaf, ref) != offset)
+		return 0;
+	return 1;
+}
+
+static noinline int lookup_extent_data_ref(struct btrfs_trans_handle *trans,
+					   struct btrfs_root *root,
+					   struct btrfs_path *path,
+					   u64 bytenr, u64 parent,
+					   u64 root_objectid,
+					   u64 owner, u64 offset)
+{
+	struct btrfs_key key;
+	struct btrfs_extent_data_ref *ref;
 	struct extent_buffer *leaf;
-	u64 ref_objectid;
+	u32 nritems;
 	int ret;
+	int recow;
+	int err = -ENOENT;
 
 	key.objectid = bytenr;
-	key.type = BTRFS_EXTENT_REF_KEY;
-	key.offset = parent;
+	if (parent) {
+		key.type = BTRFS_SHARED_DATA_REF_KEY;
+		key.offset = parent;
+	} else {
+		key.type = BTRFS_EXTENT_DATA_REF_KEY;
+		key.offset = hash_extent_data_ref(root_objectid,
+						  owner, offset);
+	}
+again:
+	recow = 0;
+	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+	if (ret < 0) {
+		err = ret;
+		goto fail;
+	}
 
-	ret = btrfs_search_slot(trans, root, &key, path, del ? -1 : 0, 1);
-	if (ret < 0)
-		goto out;
-	if (ret > 0) {
-		ret = -ENOENT;
-		goto out;
+	if (parent) {
+		if (!ret)
+			return 0;
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		key.type = BTRFS_EXTENT_REF_V0_KEY;
+		btrfs_release_path(root, path);
+		ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+		if (ret < 0) {
+			err = ret;
+			goto fail;
+		}
+		if (!ret)
+			return 0;
+#endif
+		goto fail;
 	}
 
 	leaf = path->nodes[0];
-	ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_ref);
-	ref_objectid = btrfs_ref_objectid(leaf, ref);
-	if (btrfs_ref_root(leaf, ref) != ref_root ||
-	    btrfs_ref_generation(leaf, ref) != ref_generation ||
-	    (ref_objectid != owner_objectid &&
-	     ref_objectid != BTRFS_MULTIPLE_OBJECTIDS)) {
-		ret = -EIO;
-		WARN_ON(1);
-		goto out;
+	nritems = btrfs_header_nritems(leaf);
+	while (1) {
+		if (path->slots[0] >= nritems) {
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0)
+				err = ret;
+			if (ret)
+				goto fail;
+
+			leaf = path->nodes[0];
+			nritems = btrfs_header_nritems(leaf);
+			recow = 1;
+		}
+
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		if (key.objectid != bytenr ||
+		    key.type != BTRFS_EXTENT_DATA_REF_KEY)
+			goto fail;
+
+		ref = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_extent_data_ref);
+
+		if (match_extent_data_ref(leaf, ref, root_objectid,
+					  owner, offset)) {
+			if (recow) {
+				btrfs_release_path(root, path);
+				goto again;
+			}
+			err = 0;
+			break;
+		}
+		path->slots[0]++;
 	}
-	ret = 0;
-out:
-	return ret;
+fail:
+	return err;
 }
 
-static noinline int insert_extent_backref(struct btrfs_trans_handle *trans,
-					  struct btrfs_root *root,
-					  struct btrfs_path *path,
-					  u64 bytenr, u64 parent,
-					  u64 ref_root, u64 ref_generation,
-					  u64 owner_objectid,
-					  int refs_to_add)
+static noinline int insert_extent_data_ref(struct btrfs_trans_handle *trans,
+					   struct btrfs_root *root,
+					   struct btrfs_path *path,
+					   u64 bytenr, u64 parent,
+					   u64 root_objectid, u64 owner,
+					   u64 offset, int refs_to_add)
 {
 	struct btrfs_key key;
 	struct extent_buffer *leaf;
-	struct btrfs_extent_ref *ref;
+	u32 size;
 	u32 num_refs;
 	int ret;
 
 	key.objectid = bytenr;
-	key.type = BTRFS_EXTENT_REF_KEY;
-	key.offset = parent;
+	if (parent) {
+		key.type = BTRFS_SHARED_DATA_REF_KEY;
+		key.offset = parent;
+		size = sizeof(struct btrfs_shared_data_ref);
+	} else {
+		key.type = BTRFS_EXTENT_DATA_REF_KEY;
+		key.offset = hash_extent_data_ref(root_objectid,
+						  owner, offset);
+		size = sizeof(struct btrfs_extent_data_ref);
+	}
 
-	ret = btrfs_insert_empty_item(trans, root, path, &key, sizeof(*ref));
-	if (ret == 0) {
-		leaf = path->nodes[0];
-		ref = btrfs_item_ptr(leaf, path->slots[0],
-				     struct btrfs_extent_ref);
-		btrfs_set_ref_root(leaf, ref, ref_root);
-		btrfs_set_ref_generation(leaf, ref, ref_generation);
-		btrfs_set_ref_objectid(leaf, ref, owner_objectid);
-		btrfs_set_ref_num_refs(leaf, ref, refs_to_add);
-	} else if (ret == -EEXIST) {
-		u64 existing_owner;
-
-		BUG_ON(owner_objectid < BTRFS_FIRST_FREE_OBJECTID);
-		leaf = path->nodes[0];
+	ret = btrfs_insert_empty_item(trans, root, path, &key, size);
+	if (ret && ret != -EEXIST)
+		goto fail;
+
+	leaf = path->nodes[0];
+	if (parent) {
+		struct btrfs_shared_data_ref *ref;
 		ref = btrfs_item_ptr(leaf, path->slots[0],
-				     struct btrfs_extent_ref);
-		if (btrfs_ref_root(leaf, ref) != ref_root ||
-		    btrfs_ref_generation(leaf, ref) != ref_generation) {
-			ret = -EIO;
-			WARN_ON(1);
-			goto out;
+				     struct btrfs_shared_data_ref);
+		if (ret == 0) {
+			btrfs_set_shared_data_ref_count(leaf, ref, refs_to_add);
+		} else {
+			num_refs = btrfs_shared_data_ref_count(leaf, ref);
+			num_refs += refs_to_add;
+			btrfs_set_shared_data_ref_count(leaf, ref, num_refs);
 		}
+	} else {
+		struct btrfs_extent_data_ref *ref;
+		while (ret == -EEXIST) {
+			ref = btrfs_item_ptr(leaf, path->slots[0],
+					     struct btrfs_extent_data_ref);
+			if (match_extent_data_ref(leaf, ref, root_objectid,
+						  owner, offset))
+				break;
+			btrfs_release_path(root, path);
+			key.offset++;
+			ret = btrfs_insert_empty_item(trans, root, path, &key,
+						      size);
+			if (ret && ret != -EEXIST)
+				goto fail;
 
-		num_refs = btrfs_ref_num_refs(leaf, ref);
-		BUG_ON(num_refs == 0);
-		btrfs_set_ref_num_refs(leaf, ref, num_refs + refs_to_add);
-
-		existing_owner = btrfs_ref_objectid(leaf, ref);
-		if (existing_owner != owner_objectid &&
-		    existing_owner != BTRFS_MULTIPLE_OBJECTIDS) {
-			btrfs_set_ref_objectid(leaf, ref,
-					BTRFS_MULTIPLE_OBJECTIDS);
+			leaf = path->nodes[0];
+		}
+		ref = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_extent_data_ref);
+		if (ret == 0) {
+			btrfs_set_extent_data_ref_root(leaf, ref,
+						       root_objectid);
+			btrfs_set_extent_data_ref_objectid(leaf, ref, owner);
+			btrfs_set_extent_data_ref_offset(leaf, ref, offset);
+			btrfs_set_extent_data_ref_count(leaf, ref, refs_to_add);
+		} else {
+			num_refs = btrfs_extent_data_ref_count(leaf, ref);
+			num_refs += refs_to_add;
+			btrfs_set_extent_data_ref_count(leaf, ref, num_refs);
 		}
-		ret = 0;
-	} else {
-		goto out;
 	}
-	btrfs_unlock_up_safe(path, 1);
-	btrfs_mark_buffer_dirty(path->nodes[0]);
-out:
+	btrfs_mark_buffer_dirty(leaf);
+	ret = 0;
+fail:
 	btrfs_release_path(root, path);
 	return ret;
 }
 
-static noinline int remove_extent_backref(struct btrfs_trans_handle *trans,
-					  struct btrfs_root *root,
-					  struct btrfs_path *path,
-					  int refs_to_drop)
+static noinline int remove_extent_data_ref(struct btrfs_trans_handle *trans,
+					   struct btrfs_root *root,
+					   struct btrfs_path *path,
+					   int refs_to_drop)
 {
+	struct btrfs_key key;
+	struct btrfs_extent_data_ref *ref1 = NULL;
+	struct btrfs_shared_data_ref *ref2 = NULL;
 	struct extent_buffer *leaf;
-	struct btrfs_extent_ref *ref;
-	u32 num_refs;
+	u32 num_refs = 0;
 	int ret = 0;
 
 	leaf = path->nodes[0];
-	ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_ref);
-	num_refs = btrfs_ref_num_refs(leaf, ref);
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+
+	if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+		ref1 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_data_ref);
+		num_refs = btrfs_extent_data_ref_count(leaf, ref1);
+	} else if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+		ref2 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_shared_data_ref);
+		num_refs = btrfs_shared_data_ref_count(leaf, ref2);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	} else if (key.type == BTRFS_EXTENT_REF_V0_KEY) {
+		struct btrfs_extent_ref_v0 *ref0;
+		ref0 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_ref_v0);
+		num_refs = btrfs_ref_count_v0(leaf, ref0);
+#endif
+	} else {
+		BUG();
+	}
+
 	BUG_ON(num_refs < refs_to_drop);
 	num_refs -= refs_to_drop;
+
 	if (num_refs == 0) {
 		ret = btrfs_del_item(trans, root, path);
 	} else {
-		btrfs_set_ref_num_refs(leaf, ref, num_refs);
+		if (key.type == BTRFS_EXTENT_DATA_REF_KEY)
+			btrfs_set_extent_data_ref_count(leaf, ref1, num_refs);
+		else if (key.type == BTRFS_SHARED_DATA_REF_KEY)
+			btrfs_set_shared_data_ref_count(leaf, ref2, num_refs);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		else {
+			struct btrfs_extent_ref_v0 *ref0;
+			ref0 = btrfs_item_ptr(leaf, path->slots[0],
+					struct btrfs_extent_ref_v0);
+			btrfs_set_ref_count_v0(leaf, ref0, num_refs);
+		}
+#endif
 		btrfs_mark_buffer_dirty(leaf);
 	}
+	return ret;
+}
+
+static noinline u32 extent_data_ref_count(struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  struct btrfs_extent_inline_ref *iref)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	struct btrfs_extent_data_ref *ref1;
+	struct btrfs_shared_data_ref *ref2;
+	u32 num_refs = 0;
+
+	leaf = path->nodes[0];
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+	if (iref) {
+		if (btrfs_extent_inline_ref_type(leaf, iref) ==
+		    BTRFS_EXTENT_DATA_REF_KEY) {
+			ref1 = (struct btrfs_extent_data_ref *)(&iref->offset);
+			num_refs = btrfs_extent_data_ref_count(leaf, ref1);
+		} else {
+			ref2 = (struct btrfs_shared_data_ref *)(iref + 1);
+			num_refs = btrfs_shared_data_ref_count(leaf, ref2);
+		}
+	} else if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+		ref1 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_data_ref);
+		num_refs = btrfs_extent_data_ref_count(leaf, ref1);
+	} else if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+		ref2 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_shared_data_ref);
+		num_refs = btrfs_shared_data_ref_count(leaf, ref2);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	} else if (key.type == BTRFS_EXTENT_REF_V0_KEY) {
+		struct btrfs_extent_ref_v0 *ref0;
+		ref0 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_ref_v0);
+		num_refs = btrfs_ref_count_v0(leaf, ref0);
+#endif
+	} else {
+		WARN_ON(1);
+	}
+	return num_refs;
+}
+
+static noinline int lookup_tree_block_ref(struct btrfs_trans_handle *trans,
+					  struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  u64 bytenr, u64 parent,
+					  u64 root_objectid)
+{
+	struct btrfs_key key;
+	int ret;
+
+	key.objectid = bytenr;
+	if (parent) {
+		key.type = BTRFS_SHARED_BLOCK_REF_KEY;
+		key.offset = parent;
+	} else {
+		key.type = BTRFS_TREE_BLOCK_REF_KEY;
+		key.offset = root_objectid;
+	}
+
+	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+	if (ret > 0)
+		ret = -ENOENT;
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (ret == -ENOENT && parent) {
+		btrfs_release_path(root, path);
+		key.type = BTRFS_EXTENT_REF_V0_KEY;
+		ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+		if (ret > 0)
+			ret = -ENOENT;
+	}
+#endif
+	return ret;
+}
+
+static noinline int insert_tree_block_ref(struct btrfs_trans_handle *trans,
+					  struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  u64 bytenr, u64 parent,
+					  u64 root_objectid)
+{
+	struct btrfs_key key;
+	int ret;
+
+	key.objectid = bytenr;
+	if (parent) {
+		key.type = BTRFS_SHARED_BLOCK_REF_KEY;
+		key.offset = parent;
+	} else {
+		key.type = BTRFS_TREE_BLOCK_REF_KEY;
+		key.offset = root_objectid;
+	}
+
+	ret = btrfs_insert_empty_item(trans, root, path, &key, 0);
 	btrfs_release_path(root, path);
 	return ret;
 }
 
+static inline int extent_ref_type(u64 parent, u64 owner)
+{
+	int type;
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		if (parent > 0)
+			type = BTRFS_SHARED_BLOCK_REF_KEY;
+		else
+			type = BTRFS_TREE_BLOCK_REF_KEY;
+	} else {
+		if (parent > 0)
+			type = BTRFS_SHARED_DATA_REF_KEY;
+		else
+			type = BTRFS_EXTENT_DATA_REF_KEY;
+	}
+	return type;
+}
+
+static int find_next_key(struct btrfs_path *path, struct btrfs_key *key)
+
+{
+	int level;
+	BUG_ON(!path->keep_locks);
+	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+		if (!path->nodes[level])
+			break;
+		btrfs_assert_tree_locked(path->nodes[level]);
+		if (path->slots[level] + 1 >=
+		    btrfs_header_nritems(path->nodes[level]))
+			continue;
+		if (level == 0)
+			btrfs_item_key_to_cpu(path->nodes[level], key,
+					      path->slots[level] + 1);
+		else
+			btrfs_node_key_to_cpu(path->nodes[level], key,
+					      path->slots[level] + 1);
+		return 0;
+	}
+	return 1;
+}
+
+/*
+ * look for inline back ref. if back ref is found, *ref_ret is set
+ * to the address of inline back ref, and 0 is returned.
+ *
+ * if back ref isn't found, *ref_ret is set to the address where it
+ * should be inserted, and -ENOENT is returned.
+ *
+ * if insert is true and there are too many inline back refs, the path
+ * points to the extent item, and -EAGAIN is returned.
+ *
+ * NOTE: inline back refs are ordered in the same way that back ref
+ *	 items in the tree are ordered.
+ */
+static noinline_for_stack
+int lookup_inline_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref **ref_ret,
+				 u64 bytenr, u64 num_bytes,
+				 u64 parent, u64 root_objectid,
+				 u64 owner, u64 offset, int insert)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *iref;
+	u64 flags;
+	u64 item_size;
+	unsigned long ptr;
+	unsigned long end;
+	int extra_size;
+	int type;
+	int want;
+	int ret;
+	int err = 0;
+
+	key.objectid = bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = num_bytes;
+
+	want = extent_ref_type(parent, owner);
+	if (insert) {
+		extra_size = btrfs_extent_inline_ref_size(want);
+		path->keep_locks = 1;
+	} else
+		extra_size = -1;
+	ret = btrfs_search_slot(trans, root, &key, path, extra_size, 1);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+	BUG_ON(ret);
+
+	leaf = path->nodes[0];
+	item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		if (!insert) {
+			err = -ENOENT;
+			goto out;
+		}
+		ret = convert_extent_item_v0(trans, root, path, owner,
+					     extra_size);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		leaf = path->nodes[0];
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+	}
+#endif
+	BUG_ON(item_size < sizeof(*ei));
+
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	flags = btrfs_extent_flags(leaf, ei);
+
+	ptr = (unsigned long)(ei + 1);
+	end = (unsigned long)ei + item_size;
+
+	if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+		ptr += sizeof(struct btrfs_tree_block_info);
+		BUG_ON(ptr > end);
+	} else {
+		BUG_ON(!(flags & BTRFS_EXTENT_FLAG_DATA));
+	}
+
+	err = -ENOENT;
+	while (1) {
+		if (ptr >= end) {
+			WARN_ON(ptr > end);
+			break;
+		}
+		iref = (struct btrfs_extent_inline_ref *)ptr;
+		type = btrfs_extent_inline_ref_type(leaf, iref);
+		if (want < type)
+			break;
+		if (want > type) {
+			ptr += btrfs_extent_inline_ref_size(type);
+			continue;
+		}
+
+		if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+			struct btrfs_extent_data_ref *dref;
+			dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+			if (match_extent_data_ref(leaf, dref, root_objectid,
+						  owner, offset)) {
+				err = 0;
+				break;
+			}
+			if (hash_extent_data_ref_item(leaf, dref) <
+			    hash_extent_data_ref(root_objectid, owner, offset))
+				break;
+		} else {
+			u64 ref_offset;
+			ref_offset = btrfs_extent_inline_ref_offset(leaf, iref);
+			if (parent > 0) {
+				if (parent == ref_offset) {
+					err = 0;
+					break;
+				}
+				if (ref_offset < parent)
+					break;
+			} else {
+				if (root_objectid == ref_offset) {
+					err = 0;
+					break;
+				}
+				if (ref_offset < root_objectid)
+					break;
+			}
+		}
+		ptr += btrfs_extent_inline_ref_size(type);
+	}
+	if (err == -ENOENT && insert) {
+		if (item_size + extra_size >=
+		    BTRFS_MAX_EXTENT_ITEM_SIZE(root)) {
+			err = -EAGAIN;
+			goto out;
+		}
+		/*
+		 * To add new inline back ref, we have to make sure
+		 * there is no corresponding back ref item.
+		 * For simplicity, we just do not add new inline back
+		 * ref if there is any kind of item for this block
+		 */
+		if (find_next_key(path, &key) == 0 && key.objectid == bytenr &&
+		    key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) {
+			err = -EAGAIN;
+			goto out;
+		}
+	}
+	*ref_ret = (struct btrfs_extent_inline_ref *)ptr;
+out:
+	if (insert) {
+		path->keep_locks = 0;
+		btrfs_unlock_up_safe(path, 1);
+	}
+	return err;
+}
+
+/*
+ * helper to add new inline back ref
+ */
+static noinline_for_stack
+int setup_inline_extent_backref(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				struct btrfs_path *path,
+				struct btrfs_extent_inline_ref *iref,
+				u64 parent, u64 root_objectid,
+				u64 owner, u64 offset, int refs_to_add,
+				struct btrfs_delayed_extent_op *extent_op)
+{
+	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	unsigned long ptr;
+	unsigned long end;
+	unsigned long item_offset;
+	u64 refs;
+	int size;
+	int type;
+	int ret;
+
+	leaf = path->nodes[0];
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	item_offset = (unsigned long)iref - (unsigned long)ei;
+
+	type = extent_ref_type(parent, owner);
+	size = btrfs_extent_inline_ref_size(type);
+
+	ret = btrfs_extend_item(trans, root, path, size);
+	BUG_ON(ret);
+
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	refs = btrfs_extent_refs(leaf, ei);
+	refs += refs_to_add;
+	btrfs_set_extent_refs(leaf, ei, refs);
+	if (extent_op)
+		__run_delayed_extent_op(extent_op, leaf, ei);
+
+	ptr = (unsigned long)ei + item_offset;
+	end = (unsigned long)ei + btrfs_item_size_nr(leaf, path->slots[0]);
+	if (ptr < end - size)
+		memmove_extent_buffer(leaf, ptr + size, ptr,
+				      end - size - ptr);
+
+	iref = (struct btrfs_extent_inline_ref *)ptr;
+	btrfs_set_extent_inline_ref_type(leaf, iref, type);
+	if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+		struct btrfs_extent_data_ref *dref;
+		dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+		btrfs_set_extent_data_ref_root(leaf, dref, root_objectid);
+		btrfs_set_extent_data_ref_objectid(leaf, dref, owner);
+		btrfs_set_extent_data_ref_offset(leaf, dref, offset);
+		btrfs_set_extent_data_ref_count(leaf, dref, refs_to_add);
+	} else if (type == BTRFS_SHARED_DATA_REF_KEY) {
+		struct btrfs_shared_data_ref *sref;
+		sref = (struct btrfs_shared_data_ref *)(iref + 1);
+		btrfs_set_shared_data_ref_count(leaf, sref, refs_to_add);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+	} else if (type == BTRFS_SHARED_BLOCK_REF_KEY) {
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+	} else {
+		btrfs_set_extent_inline_ref_offset(leaf, iref, root_objectid);
+	}
+	btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+
+static int lookup_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref **ref_ret,
+				 u64 bytenr, u64 num_bytes, u64 parent,
+				 u64 root_objectid, u64 owner, u64 offset)
+{
+	int ret;
+
+	ret = lookup_inline_extent_backref(trans, root, path, ref_ret,
+					   bytenr, num_bytes, parent,
+					   root_objectid, owner, offset, 0);
+	if (ret != -ENOENT)
+		return ret;
+
+	btrfs_release_path(root, path);
+	*ref_ret = NULL;
+
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		ret = lookup_tree_block_ref(trans, root, path, bytenr, parent,
+					    root_objectid);
+	} else {
+		ret = lookup_extent_data_ref(trans, root, path, bytenr, parent,
+					     root_objectid, owner, offset);
+	}
+	return ret;
+}
+
+/*
+ * helper to update/remove inline back ref
+ */
+static noinline_for_stack
+int update_inline_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref *iref,
+				 int refs_to_mod,
+				 struct btrfs_delayed_extent_op *extent_op)
+{
+	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_data_ref *dref = NULL;
+	struct btrfs_shared_data_ref *sref = NULL;
+	unsigned long ptr;
+	unsigned long end;
+	u32 item_size;
+	int size;
+	int type;
+	int ret;
+	u64 refs;
+
+	leaf = path->nodes[0];
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	refs = btrfs_extent_refs(leaf, ei);
+	WARN_ON(refs_to_mod < 0 && refs + refs_to_mod <= 0);
+	refs += refs_to_mod;
+	btrfs_set_extent_refs(leaf, ei, refs);
+	if (extent_op)
+		__run_delayed_extent_op(extent_op, leaf, ei);
+
+	type = btrfs_extent_inline_ref_type(leaf, iref);
+
+	if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+		dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+		refs = btrfs_extent_data_ref_count(leaf, dref);
+	} else if (type == BTRFS_SHARED_DATA_REF_KEY) {
+		sref = (struct btrfs_shared_data_ref *)(iref + 1);
+		refs = btrfs_shared_data_ref_count(leaf, sref);
+	} else {
+		refs = 1;
+		BUG_ON(refs_to_mod != -1);
+	}
+
+	BUG_ON(refs_to_mod < 0 && refs < -refs_to_mod);
+	refs += refs_to_mod;
+
+	if (refs > 0) {
+		if (type == BTRFS_EXTENT_DATA_REF_KEY)
+			btrfs_set_extent_data_ref_count(leaf, dref, refs);
+		else
+			btrfs_set_shared_data_ref_count(leaf, sref, refs);
+	} else {
+		size =  btrfs_extent_inline_ref_size(type);
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+		ptr = (unsigned long)iref;
+		end = (unsigned long)ei + item_size;
+		if (ptr + size < end)
+			memmove_extent_buffer(leaf, ptr, ptr + size,
+					      end - ptr - size);
+		item_size -= size;
+		ret = btrfs_truncate_item(trans, root, path, item_size, 1);
+		BUG_ON(ret);
+	}
+	btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+
+static noinline_for_stack
+int insert_inline_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 u64 bytenr, u64 num_bytes, u64 parent,
+				 u64 root_objectid, u64 owner,
+				 u64 offset, int refs_to_add,
+				 struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_extent_inline_ref *iref;
+	int ret;
+
+	ret = lookup_inline_extent_backref(trans, root, path, &iref,
+					   bytenr, num_bytes, parent,
+					   root_objectid, owner, offset, 1);
+	if (ret == 0) {
+		BUG_ON(owner < BTRFS_FIRST_FREE_OBJECTID);
+		ret = update_inline_extent_backref(trans, root, path, iref,
+						   refs_to_add, extent_op);
+	} else if (ret == -ENOENT) {
+		ret = setup_inline_extent_backref(trans, root, path, iref,
+						  parent, root_objectid,
+						  owner, offset, refs_to_add,
+						  extent_op);
+	}
+	return ret;
+}
+
+static int insert_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 u64 bytenr, u64 parent, u64 root_objectid,
+				 u64 owner, u64 offset, int refs_to_add)
+{
+	int ret;
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		BUG_ON(refs_to_add != 1);
+		ret = insert_tree_block_ref(trans, root, path, bytenr,
+					    parent, root_objectid);
+	} else {
+		ret = insert_extent_data_ref(trans, root, path, bytenr,
+					     parent, root_objectid,
+					     owner, offset, refs_to_add);
+	}
+	return ret;
+}
+
+static int remove_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref *iref,
+				 int refs_to_drop, int is_data)
+{
+	int ret;
+
+	BUG_ON(!is_data && refs_to_drop != 1);
+	if (iref) {
+		ret = update_inline_extent_backref(trans, root, path, iref,
+						   -refs_to_drop, NULL);
+	} else if (is_data) {
+		ret = remove_extent_data_ref(trans, root, path, refs_to_drop);
+	} else {
+		ret = btrfs_del_item(trans, root, path);
+	}
+	return ret;
+}
+
 #ifdef BIO_RW_DISCARD
 static void btrfs_issue_discard(struct block_device *bdev,
 				u64 start, u64 len)
@@ -686,71 +1445,40 @@ static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr,
 #endif
 }
 
-static int __btrfs_update_extent_ref(struct btrfs_trans_handle *trans,
-				     struct btrfs_root *root, u64 bytenr,
-				     u64 num_bytes,
-				     u64 orig_parent, u64 parent,
-				     u64 orig_root, u64 ref_root,
-				     u64 orig_generation, u64 ref_generation,
-				     u64 owner_objectid)
+int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
+			 struct btrfs_root *root,
+			 u64 bytenr, u64 num_bytes, u64 parent,
+			 u64 root_objectid, u64 owner, u64 offset)
 {
 	int ret;
-	int pin = owner_objectid < BTRFS_FIRST_FREE_OBJECTID;
+	BUG_ON(owner < BTRFS_FIRST_FREE_OBJECTID &&
+	       root_objectid == BTRFS_TREE_LOG_OBJECTID);
 
-	ret = btrfs_update_delayed_ref(trans, bytenr, num_bytes,
-				       orig_parent, parent, orig_root,
-				       ref_root, orig_generation,
-				       ref_generation, owner_objectid, pin);
-	BUG_ON(ret);
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		ret = btrfs_add_delayed_tree_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, (int)owner,
+					BTRFS_ADD_DELAYED_REF, NULL);
+	} else {
+		ret = btrfs_add_delayed_data_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, owner, offset,
+					BTRFS_ADD_DELAYED_REF, NULL);
+	}
 	return ret;
 }
 
-int btrfs_update_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr,
-			    u64 num_bytes, u64 orig_parent, u64 parent,
-			    u64 ref_root, u64 ref_generation,
-			    u64 owner_objectid)
-{
-	int ret;
-	if (ref_root == BTRFS_TREE_LOG_OBJECTID &&
-	    owner_objectid < BTRFS_FIRST_FREE_OBJECTID)
-		return 0;
-
-	ret = __btrfs_update_extent_ref(trans, root, bytenr, num_bytes,
-					orig_parent, parent, ref_root,
-					ref_root, ref_generation,
-					ref_generation, owner_objectid);
-	return ret;
-}
 static int __btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
-				  struct btrfs_root *root, u64 bytenr,
-				  u64 num_bytes,
-				  u64 orig_parent, u64 parent,
-				  u64 orig_root, u64 ref_root,
-				  u64 orig_generation, u64 ref_generation,
-				  u64 owner_objectid)
-{
-	int ret;
-
-	ret = btrfs_add_delayed_ref(trans, bytenr, num_bytes, parent, ref_root,
-				    ref_generation, owner_objectid,
-				    BTRFS_ADD_DELAYED_REF, 0);
-	BUG_ON(ret);
-	return ret;
-}
-
-static noinline_for_stack int add_extent_ref(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root, u64 bytenr,
-			  u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid,
-			  int refs_to_add)
+				  struct btrfs_root *root,
+				  u64 bytenr, u64 num_bytes,
+				  u64 parent, u64 root_objectid,
+				  u64 owner, u64 offset, int refs_to_add,
+				  struct btrfs_delayed_extent_op *extent_op)
 {
 	struct btrfs_path *path;
-	int ret;
-	struct btrfs_key key;
-	struct extent_buffer *l;
+	struct extent_buffer *leaf;
 	struct btrfs_extent_item *item;
-	u32 refs;
+	u64 refs;
+	int ret;
+	int err = 0;
 
 	path = btrfs_alloc_path();
 	if (!path)
@@ -758,43 +1486,27 @@ static noinline_for_stack int add_extent_ref(struct btrfs_trans_handle *trans,
 
 	path->reada = 1;
 	path->leave_spinning = 1;
-	key.objectid = bytenr;
-	key.type = BTRFS_EXTENT_ITEM_KEY;
-	key.offset = num_bytes;
-
-	/* first find the extent item and update its reference count */
-	ret = btrfs_search_slot(trans, root->fs_info->extent_root, &key,
-				path, 0, 1);
-	if (ret < 0) {
-		btrfs_set_path_blocking(path);
-		return ret;
-	}
-
-	if (ret > 0) {
-		WARN_ON(1);
-		btrfs_free_path(path);
-		return -EIO;
-	}
-	l = path->nodes[0];
+	/* this will setup the path even if it fails to insert the back ref */
+	ret = insert_inline_extent_backref(trans, root->fs_info->extent_root,
+					   path, bytenr, num_bytes, parent,
+					   root_objectid, owner, offset,
+					   refs_to_add, extent_op);
+	if (ret == 0)
+		goto out;
 
-	btrfs_item_key_to_cpu(l, &key, path->slots[0]);
-	if (key.objectid != bytenr) {
-		btrfs_print_leaf(root->fs_info->extent_root, path->nodes[0]);
-		printk(KERN_ERR "btrfs wanted %llu found %llu\n",
-		       (unsigned long long)bytenr,
-		       (unsigned long long)key.objectid);
-		BUG();
+	if (ret != -EAGAIN) {
+		err = ret;
+		goto out;
 	}
-	BUG_ON(key.type != BTRFS_EXTENT_ITEM_KEY);
-
-	item = btrfs_item_ptr(l, path->slots[0], struct btrfs_extent_item);
-
-	refs = btrfs_extent_refs(l, item);
-	btrfs_set_extent_refs(l, item, refs + refs_to_add);
-	btrfs_unlock_up_safe(path, 1);
 
-	btrfs_mark_buffer_dirty(path->nodes[0]);
+	leaf = path->nodes[0];
+	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	refs = btrfs_extent_refs(leaf, item);
+	btrfs_set_extent_refs(leaf, item, refs + refs_to_add);
+	if (extent_op)
+		__run_delayed_extent_op(extent_op, leaf, item);
 
+	btrfs_mark_buffer_dirty(leaf);
 	btrfs_release_path(root->fs_info->extent_root, path);
 
 	path->reada = 1;
@@ -802,56 +1514,197 @@ static noinline_for_stack int add_extent_ref(struct btrfs_trans_handle *trans,
 
 	/* now insert the actual backref */
 	ret = insert_extent_backref(trans, root->fs_info->extent_root,
-				    path, bytenr, parent,
-				    ref_root, ref_generation,
-				    owner_objectid, refs_to_add);
+				    path, bytenr, parent, root_objectid,
+				    owner, offset, refs_to_add);
 	BUG_ON(ret);
+out:
 	btrfs_free_path(path);
-	return 0;
+	return err;
 }
 
-int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
-			 struct btrfs_root *root,
-			 u64 bytenr, u64 num_bytes, u64 parent,
-			 u64 ref_root, u64 ref_generation,
-			 u64 owner_objectid)
+static int run_delayed_data_ref(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				struct btrfs_delayed_ref_node *node,
+				struct btrfs_delayed_extent_op *extent_op,
+				int insert_reserved)
 {
-	int ret;
-	if (ref_root == BTRFS_TREE_LOG_OBJECTID &&
-	    owner_objectid < BTRFS_FIRST_FREE_OBJECTID)
-		return 0;
+	int ret = 0;
+	struct btrfs_delayed_data_ref *ref;
+	struct btrfs_key ins;
+	u64 parent = 0;
+	u64 ref_root = 0;
+	u64 flags = 0;
 
-	ret = __btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0, parent,
-				     0, ref_root, 0, ref_generation,
-				     owner_objectid);
+	ins.objectid = node->bytenr;
+	ins.offset = node->num_bytes;
+	ins.type = BTRFS_EXTENT_ITEM_KEY;
+
+	ref = btrfs_delayed_node_to_data_ref(node);
+	if (node->type == BTRFS_SHARED_DATA_REF_KEY)
+		parent = ref->parent;
+	else
+		ref_root = ref->root;
+
+	if (node->action == BTRFS_ADD_DELAYED_REF && insert_reserved) {
+		if (extent_op) {
+			BUG_ON(extent_op->update_key);
+			flags |= extent_op->flags_to_set;
+		}
+		ret = alloc_reserved_file_extent(trans, root,
+						 parent, ref_root, flags,
+						 ref->objectid, ref->offset,
+						 &ins, node->ref_mod);
+		update_reserved_extents(root, ins.objectid, ins.offset, 0);
+	} else if (node->action == BTRFS_ADD_DELAYED_REF) {
+		ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
+					     node->num_bytes, parent,
+					     ref_root, ref->objectid,
+					     ref->offset, node->ref_mod,
+					     extent_op);
+	} else if (node->action == BTRFS_DROP_DELAYED_REF) {
+		ret = __btrfs_free_extent(trans, root, node->bytenr,
+					  node->num_bytes, parent,
+					  ref_root, ref->objectid,
+					  ref->offset, node->ref_mod,
+					  extent_op);
+	} else {
+		BUG();
+	}
 	return ret;
 }
 
-static int drop_delayed_ref(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					struct btrfs_delayed_ref_node *node)
+static void __run_delayed_extent_op(struct btrfs_delayed_extent_op *extent_op,
+				    struct extent_buffer *leaf,
+				    struct btrfs_extent_item *ei)
+{
+	u64 flags = btrfs_extent_flags(leaf, ei);
+	if (extent_op->update_flags) {
+		flags |= extent_op->flags_to_set;
+		btrfs_set_extent_flags(leaf, ei, flags);
+	}
+
+	if (extent_op->update_key) {
+		struct btrfs_tree_block_info *bi;
+		BUG_ON(!(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK));
+		bi = (struct btrfs_tree_block_info *)(ei + 1);
+		btrfs_set_tree_block_key(leaf, bi, &extent_op->key);
+	}
+}
+
+static int run_delayed_extent_op(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_delayed_ref_node *node,
+				 struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_key key;
+	struct btrfs_path *path;
+	struct btrfs_extent_item *ei;
+	struct extent_buffer *leaf;
+	u32 item_size;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	key.objectid = node->bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = node->num_bytes;
+
+	path->reada = 1;
+	path->leave_spinning = 1;
+	ret = btrfs_search_slot(trans, root->fs_info->extent_root, &key,
+				path, 0, 1);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+	if (ret > 0) {
+		err = -EIO;
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		ret = convert_extent_item_v0(trans, root->fs_info->extent_root,
+					     path, (u64)-1, 0);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		leaf = path->nodes[0];
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+	}
+#endif
+	BUG_ON(item_size < sizeof(*ei));
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	__run_delayed_extent_op(extent_op, leaf, ei);
+
+	btrfs_mark_buffer_dirty(leaf);
+out:
+	btrfs_free_path(path);
+	return err;
+}
+
+static int run_delayed_tree_ref(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				struct btrfs_delayed_ref_node *node,
+				struct btrfs_delayed_extent_op *extent_op,
+				int insert_reserved)
 {
 	int ret = 0;
-	struct btrfs_delayed_ref *ref = btrfs_delayed_node_to_ref(node);
+	struct btrfs_delayed_tree_ref *ref;
+	struct btrfs_key ins;
+	u64 parent = 0;
+	u64 ref_root = 0;
 
-	BUG_ON(node->ref_mod == 0);
-	ret = __btrfs_free_extent(trans, root, node->bytenr, node->num_bytes,
-				  node->parent, ref->root, ref->generation,
-				  ref->owner_objectid, ref->pin, node->ref_mod);
+	ins.objectid = node->bytenr;
+	ins.offset = node->num_bytes;
+	ins.type = BTRFS_EXTENT_ITEM_KEY;
 
+	ref = btrfs_delayed_node_to_tree_ref(node);
+	if (node->type == BTRFS_SHARED_BLOCK_REF_KEY)
+		parent = ref->parent;
+	else
+		ref_root = ref->root;
+
+	BUG_ON(node->ref_mod != 1);
+	if (node->action == BTRFS_ADD_DELAYED_REF && insert_reserved) {
+		BUG_ON(!extent_op || !extent_op->update_flags ||
+		       !extent_op->update_key);
+		ret = alloc_reserved_tree_block(trans, root,
+						parent, ref_root,
+						extent_op->flags_to_set,
+						&extent_op->key,
+						ref->level, &ins);
+		update_reserved_extents(root, ins.objectid, ins.offset, 0);
+	} else if (node->action == BTRFS_ADD_DELAYED_REF) {
+		ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
+					     node->num_bytes, parent, ref_root,
+					     ref->level, 0, 1, extent_op);
+	} else if (node->action == BTRFS_DROP_DELAYED_REF) {
+		ret = __btrfs_free_extent(trans, root, node->bytenr,
+					  node->num_bytes, parent, ref_root,
+					  ref->level, 0, 1, extent_op);
+	} else {
+		BUG();
+	}
 	return ret;
 }
 
+
 /* helper function to actually process a single delayed ref entry */
-static noinline int run_one_delayed_ref(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					struct btrfs_delayed_ref_node *node,
-					int insert_reserved)
+static int run_one_delayed_ref(struct btrfs_trans_handle *trans,
+			       struct btrfs_root *root,
+			       struct btrfs_delayed_ref_node *node,
+			       struct btrfs_delayed_extent_op *extent_op,
+			       int insert_reserved)
 {
 	int ret;
-	struct btrfs_delayed_ref *ref;
-
-	if (node->parent == (u64)-1) {
+	if (btrfs_delayed_ref_is_head(node)) {
 		struct btrfs_delayed_ref_head *head;
 		/*
 		 * we've hit the end of the chain and we were supposed
@@ -859,44 +1712,35 @@ static noinline int run_one_delayed_ref(struct btrfs_trans_handle *trans,
 		 * deleted before we ever needed to insert it, so all
 		 * we have to do is clean up the accounting
 		 */
+		BUG_ON(extent_op);
+		head = btrfs_delayed_node_to_head(node);
 		if (insert_reserved) {
+			if (head->is_data) {
+				ret = btrfs_del_csums(trans, root,
+						      node->bytenr,
+						      node->num_bytes);
+				BUG_ON(ret);
+			}
+			btrfs_update_pinned_extents(root, node->bytenr,
+						    node->num_bytes, 1);
 			update_reserved_extents(root, node->bytenr,
 						node->num_bytes, 0);
 		}
-		head = btrfs_delayed_node_to_head(node);
 		mutex_unlock(&head->mutex);
 		return 0;
 	}
 
-	ref = btrfs_delayed_node_to_ref(node);
-	if (ref->action == BTRFS_ADD_DELAYED_REF) {
-		if (insert_reserved) {
-			struct btrfs_key ins;
-
-			ins.objectid = node->bytenr;
-			ins.offset = node->num_bytes;
-			ins.type = BTRFS_EXTENT_ITEM_KEY;
-
-			/* record the full extent allocation */
-			ret = __btrfs_alloc_reserved_extent(trans, root,
-					node->parent, ref->root,
-					ref->generation, ref->owner_objectid,
-					&ins, node->ref_mod);
-			update_reserved_extents(root, node->bytenr,
-						node->num_bytes, 0);
-		} else {
-			/* just add one backref */
-			ret = add_extent_ref(trans, root, node->bytenr,
-				     node->num_bytes,
-				     node->parent, ref->root, ref->generation,
-				     ref->owner_objectid, node->ref_mod);
-		}
-		BUG_ON(ret);
-	} else if (ref->action == BTRFS_DROP_DELAYED_REF) {
-		WARN_ON(insert_reserved);
-		ret = drop_delayed_ref(trans, root, node);
-	}
-	return 0;
+	if (node->type == BTRFS_TREE_BLOCK_REF_KEY ||
+	    node->type == BTRFS_SHARED_BLOCK_REF_KEY)
+		ret = run_delayed_tree_ref(trans, root, node, extent_op,
+					   insert_reserved);
+	else if (node->type == BTRFS_EXTENT_DATA_REF_KEY ||
+		 node->type == BTRFS_SHARED_DATA_REF_KEY)
+		ret = run_delayed_data_ref(trans, root, node, extent_op,
+					   insert_reserved);
+	else
+		BUG();
+	return ret;
 }
 
 static noinline struct btrfs_delayed_ref_node *
@@ -919,7 +1763,7 @@ again:
 				rb_node);
 		if (ref->bytenr != head->node.bytenr)
 			break;
-		if (btrfs_delayed_node_to_ref(ref)->action == action)
+		if (ref->action == action)
 			return ref;
 		node = rb_prev(node);
 	}
@@ -937,6 +1781,7 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 	struct btrfs_delayed_ref_root *delayed_refs;
 	struct btrfs_delayed_ref_node *ref;
 	struct btrfs_delayed_ref_head *locked_ref = NULL;
+	struct btrfs_delayed_extent_op *extent_op;
 	int ret;
 	int count = 0;
 	int must_insert_reserved = 0;
@@ -975,6 +1820,9 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 		must_insert_reserved = locked_ref->must_insert_reserved;
 		locked_ref->must_insert_reserved = 0;
 
+		extent_op = locked_ref->extent_op;
+		locked_ref->extent_op = NULL;
+
 		/*
 		 * locked_ref is the head node, so we have to go one
 		 * node back for any delayed ref updates
@@ -986,6 +1834,25 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 			 * so that any accounting fixes can happen
 			 */
 			ref = &locked_ref->node;
+
+			if (extent_op && must_insert_reserved) {
+				kfree(extent_op);
+				extent_op = NULL;
+			}
+
+			if (extent_op) {
+				spin_unlock(&delayed_refs->lock);
+
+				ret = run_delayed_extent_op(trans, root,
+							    ref, extent_op);
+				BUG_ON(ret);
+				kfree(extent_op);
+
+				cond_resched();
+				spin_lock(&delayed_refs->lock);
+				continue;
+			}
+
 			list_del_init(&locked_ref->cluster);
 			locked_ref = NULL;
 		}
@@ -993,14 +1860,17 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 		ref->in_tree = 0;
 		rb_erase(&ref->rb_node, &delayed_refs->root);
 		delayed_refs->num_entries--;
+
 		spin_unlock(&delayed_refs->lock);
 
-		ret = run_one_delayed_ref(trans, root, ref,
+		ret = run_one_delayed_ref(trans, root, ref, extent_op,
 					  must_insert_reserved);
 		BUG_ON(ret);
-		btrfs_put_delayed_ref(ref);
 
+		btrfs_put_delayed_ref(ref);
+		kfree(extent_op);
 		count++;
+
 		cond_resched();
 		spin_lock(&delayed_refs->lock);
 	}
@@ -1095,25 +1965,112 @@ out:
 	return 0;
 }
 
-int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root, u64 objectid, u64 bytenr)
+int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 flags,
+				int is_data)
+{
+	struct btrfs_delayed_extent_op *extent_op;
+	int ret;
+
+	extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
+	if (!extent_op)
+		return -ENOMEM;
+
+	extent_op->flags_to_set = flags;
+	extent_op->update_flags = 1;
+	extent_op->update_key = 0;
+	extent_op->is_data = is_data ? 1 : 0;
+
+	ret = btrfs_add_delayed_extent_op(trans, bytenr, num_bytes, extent_op);
+	if (ret)
+		kfree(extent_op);
+	return ret;
+}
+
+static noinline int check_delayed_ref(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *root,
+				      struct btrfs_path *path,
+				      u64 objectid, u64 offset, u64 bytenr)
+{
+	struct btrfs_delayed_ref_head *head;
+	struct btrfs_delayed_ref_node *ref;
+	struct btrfs_delayed_data_ref *data_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+	struct rb_node *node;
+	int ret = 0;
+
+	ret = -ENOENT;
+	delayed_refs = &trans->transaction->delayed_refs;
+	spin_lock(&delayed_refs->lock);
+	head = btrfs_find_delayed_ref_head(trans, bytenr);
+	if (!head)
+		goto out;
+
+	if (!mutex_trylock(&head->mutex)) {
+		atomic_inc(&head->node.refs);
+		spin_unlock(&delayed_refs->lock);
+
+		btrfs_release_path(root->fs_info->extent_root, path);
+
+		mutex_lock(&head->mutex);
+		mutex_unlock(&head->mutex);
+		btrfs_put_delayed_ref(&head->node);
+		return -EAGAIN;
+	}
+
+	node = rb_prev(&head->node.rb_node);
+	if (!node)
+		goto out_unlock;
+
+	ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
+
+	if (ref->bytenr != bytenr)
+		goto out_unlock;
+
+	ret = 1;
+	if (ref->type != BTRFS_EXTENT_DATA_REF_KEY)
+		goto out_unlock;
+
+	data_ref = btrfs_delayed_node_to_data_ref(ref);
+
+	node = rb_prev(node);
+	if (node) {
+		ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
+		if (ref->bytenr == bytenr)
+			goto out_unlock;
+	}
+
+	if (data_ref->root != root->root_key.objectid ||
+	    data_ref->objectid != objectid || data_ref->offset != offset)
+		goto out_unlock;
+
+	ret = 0;
+out_unlock:
+	mutex_unlock(&head->mutex);
+out:
+	spin_unlock(&delayed_refs->lock);
+	return ret;
+}
+
+static noinline int check_committed_ref(struct btrfs_trans_handle *trans,
+					struct btrfs_root *root,
+					struct btrfs_path *path,
+					u64 objectid, u64 offset, u64 bytenr)
 {
 	struct btrfs_root *extent_root = root->fs_info->extent_root;
-	struct btrfs_path *path;
 	struct extent_buffer *leaf;
-	struct btrfs_extent_ref *ref_item;
+	struct btrfs_extent_data_ref *ref;
+	struct btrfs_extent_inline_ref *iref;
+	struct btrfs_extent_item *ei;
 	struct btrfs_key key;
-	struct btrfs_key found_key;
-	u64 ref_root;
-	u64 last_snapshot;
-	u32 nritems;
+	u32 item_size;
 	int ret;
 
 	key.objectid = bytenr;
 	key.offset = (u64)-1;
 	key.type = BTRFS_EXTENT_ITEM_KEY;
 
-	path = btrfs_alloc_path();
 	ret = btrfs_search_slot(NULL, extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto out;
@@ -1125,55 +2082,83 @@ int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
 
 	path->slots[0]--;
 	leaf = path->nodes[0];
-	btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
 
-	if (found_key.objectid != bytenr ||
-	    found_key.type != BTRFS_EXTENT_ITEM_KEY)
+	if (key.objectid != bytenr || key.type != BTRFS_EXTENT_ITEM_KEY)
 		goto out;
 
-	last_snapshot = btrfs_root_last_snapshot(&root->root_item);
-	while (1) {
-		leaf = path->nodes[0];
-		nritems = btrfs_header_nritems(leaf);
-		if (path->slots[0] >= nritems) {
-			ret = btrfs_next_leaf(extent_root, path);
-			if (ret < 0)
-				goto out;
-			if (ret == 0)
-				continue;
-			break;
-		}
-		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
-		if (found_key.objectid != bytenr)
-			break;
+	ret = 1;
+	item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		WARN_ON(item_size != sizeof(struct btrfs_extent_item_v0));
+		goto out;
+	}
+#endif
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
 
-		if (found_key.type != BTRFS_EXTENT_REF_KEY) {
-			path->slots[0]++;
-			continue;
-		}
+	if (item_size != sizeof(*ei) +
+	    btrfs_extent_inline_ref_size(BTRFS_EXTENT_DATA_REF_KEY))
+		goto out;
 
-		ref_item = btrfs_item_ptr(leaf, path->slots[0],
-					  struct btrfs_extent_ref);
-		ref_root = btrfs_ref_root(leaf, ref_item);
-		if ((ref_root != root->root_key.objectid &&
-		     ref_root != BTRFS_TREE_LOG_OBJECTID) ||
-		     objectid != btrfs_ref_objectid(leaf, ref_item)) {
-			ret = 1;
-			goto out;
-		}
-		if (btrfs_ref_generation(leaf, ref_item) <= last_snapshot) {
-			ret = 1;
+	if (btrfs_extent_generation(leaf, ei) <=
+	    btrfs_root_last_snapshot(&root->root_item))
+		goto out;
+
+	iref = (struct btrfs_extent_inline_ref *)(ei + 1);
+	if (btrfs_extent_inline_ref_type(leaf, iref) !=
+	    BTRFS_EXTENT_DATA_REF_KEY)
+		goto out;
+
+	ref = (struct btrfs_extent_data_ref *)(&iref->offset);
+	if (btrfs_extent_refs(leaf, ei) !=
+	    btrfs_extent_data_ref_count(leaf, ref) ||
+	    btrfs_extent_data_ref_root(leaf, ref) !=
+	    root->root_key.objectid ||
+	    btrfs_extent_data_ref_objectid(leaf, ref) != objectid ||
+	    btrfs_extent_data_ref_offset(leaf, ref) != offset)
+		goto out;
+
+	ret = 0;
+out:
+	return ret;
+}
+
+int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root,
+			  u64 objectid, u64 offset, u64 bytenr)
+{
+	struct btrfs_path *path;
+	int ret;
+	int ret2;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOENT;
+
+	do {
+		ret = check_committed_ref(trans, root, path, objectid,
+					  offset, bytenr);
+		if (ret && ret != -ENOENT)
 			goto out;
-		}
 
-		path->slots[0]++;
+		ret2 = check_delayed_ref(trans, root, path, objectid,
+					 offset, bytenr);
+	} while (ret2 == -EAGAIN);
+
+	if (ret2 && ret2 != -ENOENT) {
+		ret = ret2;
+		goto out;
 	}
-	ret = 0;
+
+	if (ret != -ENOENT || ret2 != -ENOENT)
+		ret = 0;
 out:
 	btrfs_free_path(path);
 	return ret;
 }
 
+#if 0
 int btrfs_cache_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		    struct extent_buffer *buf, u32 nr_extents)
 {
@@ -1291,62 +2276,44 @@ static int refsort_cmp(const void *a_void, const void *b_void)
 		return 1;
 	return 0;
 }
+#endif
 
-
-noinline int btrfs_inc_ref(struct btrfs_trans_handle *trans,
+static int __btrfs_mod_ref(struct btrfs_trans_handle *trans,
 			   struct btrfs_root *root,
-			   struct extent_buffer *orig_buf,
-			   struct extent_buffer *buf, u32 *nr_extents)
+			   struct extent_buffer *buf,
+			   int full_backref, int inc)
 {
 	u64 bytenr;
+	u64 num_bytes;
+	u64 parent;
 	u64 ref_root;
-	u64 orig_root;
-	u64 ref_generation;
-	u64 orig_generation;
-	struct refsort *sorted;
 	u32 nritems;
-	u32 nr_file_extents = 0;
 	struct btrfs_key key;
 	struct btrfs_file_extent_item *fi;
 	int i;
 	int level;
 	int ret = 0;
-	int faili = 0;
-	int refi = 0;
-	int slot;
 	int (*process_func)(struct btrfs_trans_handle *, struct btrfs_root *,
-			    u64, u64, u64, u64, u64, u64, u64, u64, u64);
+			    u64, u64, u64, u64, u64, u64);
 
 	ref_root = btrfs_header_owner(buf);
-	ref_generation = btrfs_header_generation(buf);
-	orig_root = btrfs_header_owner(orig_buf);
-	orig_generation = btrfs_header_generation(orig_buf);
-
 	nritems = btrfs_header_nritems(buf);
 	level = btrfs_header_level(buf);
 
-	sorted = kmalloc(sizeof(struct refsort) * nritems, GFP_NOFS);
-	BUG_ON(!sorted);
+	if (!root->ref_cows && level == 0)
+		return 0;
 
-	if (root->ref_cows) {
-		process_func = __btrfs_inc_extent_ref;
-	} else {
-		if (level == 0 &&
-		    root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID)
-			goto out;
-		if (level != 0 &&
-		    root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID)
-			goto out;
-		process_func = __btrfs_update_extent_ref;
-	}
+	if (inc)
+		process_func = btrfs_inc_extent_ref;
+	else
+		process_func = btrfs_free_extent;
+
+	if (full_backref)
+		parent = buf->start;
+	else
+		parent = 0;
 
-	/*
-	 * we make two passes through the items.  In the first pass we
-	 * only record the byte number and slot.  Then we sort based on
-	 * byte number and do the actual work based on the sorted results
-	 */
 	for (i = 0; i < nritems; i++) {
-		cond_resched();
 		if (level == 0) {
 			btrfs_item_key_to_cpu(buf, &key, i);
 			if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
@@ -1360,151 +2327,38 @@ noinline int btrfs_inc_ref(struct btrfs_trans_handle *trans,
 			if (bytenr == 0)
 				continue;
 
-			nr_file_extents++;
-			sorted[refi].bytenr = bytenr;
-			sorted[refi].slot = i;
-			refi++;
-		} else {
-			bytenr = btrfs_node_blockptr(buf, i);
-			sorted[refi].bytenr = bytenr;
-			sorted[refi].slot = i;
-			refi++;
-		}
-	}
-	/*
-	 * if refi == 0, we didn't actually put anything into the sorted
-	 * array and we're done
-	 */
-	if (refi == 0)
-		goto out;
-
-	sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
-
-	for (i = 0; i < refi; i++) {
-		cond_resched();
-		slot = sorted[i].slot;
-		bytenr = sorted[i].bytenr;
-
-		if (level == 0) {
-			btrfs_item_key_to_cpu(buf, &key, slot);
-			fi = btrfs_item_ptr(buf, slot,
-					    struct btrfs_file_extent_item);
-
-			bytenr = btrfs_file_extent_disk_bytenr(buf, fi);
-			if (bytenr == 0)
-				continue;
-
-			ret = process_func(trans, root, bytenr,
-				   btrfs_file_extent_disk_num_bytes(buf, fi),
-				   orig_buf->start, buf->start,
-				   orig_root, ref_root,
-				   orig_generation, ref_generation,
-				   key.objectid);
-
-			if (ret) {
-				faili = slot;
-				WARN_ON(1);
+			num_bytes = btrfs_file_extent_disk_num_bytes(buf, fi);
+			key.offset -= btrfs_file_extent_offset(buf, fi);
+			ret = process_func(trans, root, bytenr, num_bytes,
+					   parent, ref_root, key.objectid,
+					   key.offset);
+			if (ret)
 				goto fail;
-			}
 		} else {
-			ret = process_func(trans, root, bytenr, buf->len,
-					   orig_buf->start, buf->start,
-					   orig_root, ref_root,
-					   orig_generation, ref_generation,
-					   level - 1);
-			if (ret) {
-				faili = slot;
-				WARN_ON(1);
+			bytenr = btrfs_node_blockptr(buf, i);
+			num_bytes = btrfs_level_size(root, level - 1);
+			ret = process_func(trans, root, bytenr, num_bytes,
+					   parent, ref_root, level - 1, 0);
+			if (ret)
 				goto fail;
-			}
 		}
 	}
-out:
-	kfree(sorted);
-	if (nr_extents) {
-		if (level == 0)
-			*nr_extents = nr_file_extents;
-		else
-			*nr_extents = nritems;
-	}
 	return 0;
 fail:
-	kfree(sorted);
-	WARN_ON(1);
+	BUG();
 	return ret;
 }
 
-int btrfs_update_ref(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root, struct extent_buffer *orig_buf,
-		     struct extent_buffer *buf, int start_slot, int nr)
-
+int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+		  struct extent_buffer *buf, int full_backref)
 {
-	u64 bytenr;
-	u64 ref_root;
-	u64 orig_root;
-	u64 ref_generation;
-	u64 orig_generation;
-	struct btrfs_key key;
-	struct btrfs_file_extent_item *fi;
-	int i;
-	int ret;
-	int slot;
-	int level;
-
-	BUG_ON(start_slot < 0);
-	BUG_ON(start_slot + nr > btrfs_header_nritems(buf));
-
-	ref_root = btrfs_header_owner(buf);
-	ref_generation = btrfs_header_generation(buf);
-	orig_root = btrfs_header_owner(orig_buf);
-	orig_generation = btrfs_header_generation(orig_buf);
-	level = btrfs_header_level(buf);
-
-	if (!root->ref_cows) {
-		if (level == 0 &&
-		    root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID)
-			return 0;
-		if (level != 0 &&
-		    root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID)
-			return 0;
-	}
+	return __btrfs_mod_ref(trans, root, buf, full_backref, 1);
+}
 
-	for (i = 0, slot = start_slot; i < nr; i++, slot++) {
-		cond_resched();
-		if (level == 0) {
-			btrfs_item_key_to_cpu(buf, &key, slot);
-			if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
-				continue;
-			fi = btrfs_item_ptr(buf, slot,
-					    struct btrfs_file_extent_item);
-			if (btrfs_file_extent_type(buf, fi) ==
-			    BTRFS_FILE_EXTENT_INLINE)
-				continue;
-			bytenr = btrfs_file_extent_disk_bytenr(buf, fi);
-			if (bytenr == 0)
-				continue;
-			ret = __btrfs_update_extent_ref(trans, root, bytenr,
-				    btrfs_file_extent_disk_num_bytes(buf, fi),
-				    orig_buf->start, buf->start,
-				    orig_root, ref_root, orig_generation,
-				    ref_generation, key.objectid);
-			if (ret)
-				goto fail;
-		} else {
-			bytenr = btrfs_node_blockptr(buf, slot);
-			ret = __btrfs_update_extent_ref(trans, root, bytenr,
-					    buf->len, orig_buf->start,
-					    buf->start, orig_root, ref_root,
-					    orig_generation, ref_generation,
-					    level - 1);
-			if (ret)
-				goto fail;
-		}
-	}
-	return 0;
-fail:
-	WARN_ON(1);
-	return -1;
+int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+		  struct extent_buffer *buf, int full_backref)
+{
+	return __btrfs_mod_ref(trans, root, buf, full_backref, 0);
 }
 
 static int write_one_cache_group(struct btrfs_trans_handle *trans,
@@ -2007,6 +2861,24 @@ static int update_block_group(struct btrfs_trans_handle *trans,
 	u64 old_val;
 	u64 byte_in_group;
 
+	/* block accounting for super block */
+	spin_lock(&info->delalloc_lock);
+	old_val = btrfs_super_bytes_used(&info->super_copy);
+	if (alloc)
+		old_val += num_bytes;
+	else
+		old_val -= num_bytes;
+	btrfs_set_super_bytes_used(&info->super_copy, old_val);
+
+	/* block accounting for root item */
+	old_val = btrfs_root_used(&root->root_item);
+	if (alloc)
+		old_val += num_bytes;
+	else
+		old_val -= num_bytes;
+	btrfs_set_root_used(&root->root_item, old_val);
+	spin_unlock(&info->delalloc_lock);
+
 	while (total) {
 		cache = btrfs_lookup_block_group(info, bytenr);
 		if (!cache)
@@ -2216,8 +3088,6 @@ static int pin_down_bytes(struct btrfs_trans_handle *trans,
 		u64 header_owner = btrfs_header_owner(buf);
 		u64 header_transid = btrfs_header_generation(buf);
 		if (header_owner != BTRFS_TREE_LOG_OBJECTID &&
-		    header_owner != BTRFS_TREE_RELOC_OBJECTID &&
-		    header_owner != BTRFS_DATA_RELOC_TREE_OBJECTID &&
 		    header_transid == trans->transid &&
 		    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
 			*must_clean = buf;
@@ -2235,63 +3105,77 @@ pinit:
 	return 0;
 }
 
-/*
- * remove an extent from the root, returns 0 on success
- */
-static int __free_extent(struct btrfs_trans_handle *trans,
-			 struct btrfs_root *root,
-			 u64 bytenr, u64 num_bytes, u64 parent,
-			 u64 root_objectid, u64 ref_generation,
-			 u64 owner_objectid, int pin, int mark_free,
-			 int refs_to_drop)
+
+static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 parent,
+				u64 root_objectid, u64 owner_objectid,
+				u64 owner_offset, int refs_to_drop,
+				struct btrfs_delayed_extent_op *extent_op)
 {
-	struct btrfs_path *path;
 	struct btrfs_key key;
+	struct btrfs_path *path;
 	struct btrfs_fs_info *info = root->fs_info;
 	struct btrfs_root *extent_root = info->extent_root;
 	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *iref;
 	int ret;
+	int is_data;
 	int extent_slot = 0;
 	int found_extent = 0;
 	int num_to_del = 1;
-	struct btrfs_extent_item *ei;
-	u32 refs;
+	u32 item_size;
+	u64 refs;
 
-	key.objectid = bytenr;
-	btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
-	key.offset = num_bytes;
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
 
 	path->reada = 1;
 	path->leave_spinning = 1;
-	ret = lookup_extent_backref(trans, extent_root, path,
-				    bytenr, parent, root_objectid,
-				    ref_generation, owner_objectid, 1);
+
+	is_data = owner_objectid >= BTRFS_FIRST_FREE_OBJECTID;
+	BUG_ON(!is_data && refs_to_drop != 1);
+
+	ret = lookup_extent_backref(trans, extent_root, path, &iref,
+				    bytenr, num_bytes, parent,
+				    root_objectid, owner_objectid,
+				    owner_offset);
 	if (ret == 0) {
-		struct btrfs_key found_key;
 		extent_slot = path->slots[0];
-		while (extent_slot > 0) {
-			extent_slot--;
-			btrfs_item_key_to_cpu(path->nodes[0], &found_key,
+		while (extent_slot >= 0) {
+			btrfs_item_key_to_cpu(path->nodes[0], &key,
 					      extent_slot);
-			if (found_key.objectid != bytenr)
+			if (key.objectid != bytenr)
 				break;
-			if (found_key.type == BTRFS_EXTENT_ITEM_KEY &&
-			    found_key.offset == num_bytes) {
+			if (key.type == BTRFS_EXTENT_ITEM_KEY &&
+			    key.offset == num_bytes) {
 				found_extent = 1;
 				break;
 			}
 			if (path->slots[0] - extent_slot > 5)
 				break;
+			extent_slot--;
 		}
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		item_size = btrfs_item_size_nr(path->nodes[0], extent_slot);
+		if (found_extent && item_size < sizeof(*ei))
+			found_extent = 0;
+#endif
 		if (!found_extent) {
+			BUG_ON(iref);
 			ret = remove_extent_backref(trans, extent_root, path,
-						    refs_to_drop);
+						    NULL, refs_to_drop,
+						    is_data);
 			BUG_ON(ret);
 			btrfs_release_path(extent_root, path);
 			path->leave_spinning = 1;
+
+			key.objectid = bytenr;
+			key.type = BTRFS_EXTENT_ITEM_KEY;
+			key.offset = num_bytes;
+
 			ret = btrfs_search_slot(trans, extent_root,
 						&key, path, -1, 1);
 			if (ret) {
@@ -2307,82 +3191,98 @@ static int __free_extent(struct btrfs_trans_handle *trans,
 		btrfs_print_leaf(extent_root, path->nodes[0]);
 		WARN_ON(1);
 		printk(KERN_ERR "btrfs unable to find ref byte nr %llu "
-		       "parent %llu root %llu gen %llu owner %llu\n",
+		       "parent %llu root %llu  owner %llu offset %llu\n",
 		       (unsigned long long)bytenr,
 		       (unsigned long long)parent,
 		       (unsigned long long)root_objectid,
-		       (unsigned long long)ref_generation,
-		       (unsigned long long)owner_objectid);
+		       (unsigned long long)owner_objectid,
+		       (unsigned long long)owner_offset);
 	}
 
 	leaf = path->nodes[0];
+	item_size = btrfs_item_size_nr(leaf, extent_slot);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		BUG_ON(found_extent || extent_slot != path->slots[0]);
+		ret = convert_extent_item_v0(trans, extent_root, path,
+					     owner_objectid, 0);
+		BUG_ON(ret < 0);
+
+		btrfs_release_path(extent_root, path);
+		path->leave_spinning = 1;
+
+		key.objectid = bytenr;
+		key.type = BTRFS_EXTENT_ITEM_KEY;
+		key.offset = num_bytes;
+
+		ret = btrfs_search_slot(trans, extent_root, &key, path,
+					-1, 1);
+		if (ret) {
+			printk(KERN_ERR "umm, got %d back from search"
+			       ", was looking for %llu\n", ret,
+			       (unsigned long long)bytenr);
+			btrfs_print_leaf(extent_root, path->nodes[0]);
+		}
+		BUG_ON(ret);
+		extent_slot = path->slots[0];
+		leaf = path->nodes[0];
+		item_size = btrfs_item_size_nr(leaf, extent_slot);
+	}
+#endif
+	BUG_ON(item_size < sizeof(*ei));
 	ei = btrfs_item_ptr(leaf, extent_slot,
 			    struct btrfs_extent_item);
-	refs = btrfs_extent_refs(leaf, ei);
-
-	/*
-	 * we're not allowed to delete the extent item if there
-	 * are other delayed ref updates pending
-	 */
+	if (owner_objectid < BTRFS_FIRST_FREE_OBJECTID) {
+		struct btrfs_tree_block_info *bi;
+		BUG_ON(item_size < sizeof(*ei) + sizeof(*bi));
+		bi = (struct btrfs_tree_block_info *)(ei + 1);
+		WARN_ON(owner_objectid != btrfs_tree_block_level(leaf, bi));
+	}
 
+	refs = btrfs_extent_refs(leaf, ei);
 	BUG_ON(refs < refs_to_drop);
 	refs -= refs_to_drop;
-	btrfs_set_extent_refs(leaf, ei, refs);
-	btrfs_mark_buffer_dirty(leaf);
 
-	if (refs == 0 && found_extent &&
-	    path->slots[0] == extent_slot + 1) {
-		struct btrfs_extent_ref *ref;
-		ref = btrfs_item_ptr(leaf, path->slots[0],
-				     struct btrfs_extent_ref);
-		BUG_ON(btrfs_ref_num_refs(leaf, ref) != refs_to_drop);
-		/* if the back ref and the extent are next to each other
-		 * they get deleted below in one shot
+	if (refs > 0) {
+		if (extent_op)
+			__run_delayed_extent_op(extent_op, leaf, ei);
+		/*
+		 * In the case of inline back ref, reference count will
+		 * be updated by remove_extent_backref
 		 */
-		path->slots[0] = extent_slot;
-		num_to_del = 2;
-	} else if (found_extent) {
-		/* otherwise delete the extent back ref */
-		ret = remove_extent_backref(trans, extent_root, path,
-					    refs_to_drop);
-		BUG_ON(ret);
-		/* if refs are 0, we need to setup the path for deletion */
-		if (refs == 0) {
-			btrfs_release_path(extent_root, path);
-			path->leave_spinning = 1;
-			ret = btrfs_search_slot(trans, extent_root, &key, path,
-						-1, 1);
+		if (iref) {
+			BUG_ON(!found_extent);
+		} else {
+			btrfs_set_extent_refs(leaf, ei, refs);
+			btrfs_mark_buffer_dirty(leaf);
+		}
+		if (found_extent) {
+			ret = remove_extent_backref(trans, extent_root, path,
+						    iref, refs_to_drop,
+						    is_data);
 			BUG_ON(ret);
 		}
-	}
-
-	if (refs == 0) {
-		u64 super_used;
-		u64 root_used;
+	} else {
+		int mark_free = 0;
 		struct extent_buffer *must_clean = NULL;
 
-		if (pin) {
-			ret = pin_down_bytes(trans, root, path,
-				bytenr, num_bytes,
-				owner_objectid >= BTRFS_FIRST_FREE_OBJECTID,
-				&must_clean);
-			if (ret > 0)
-				mark_free = 1;
-			BUG_ON(ret < 0);
+		if (found_extent) {
+			BUG_ON(is_data && refs_to_drop !=
+			       extent_data_ref_count(root, path, iref));
+			if (iref) {
+				BUG_ON(path->slots[0] != extent_slot);
+			} else {
+				BUG_ON(path->slots[0] != extent_slot + 1);
+				path->slots[0] = extent_slot;
+				num_to_del = 2;
+			}
 		}
 
-		/* block accounting for super block */
-		spin_lock(&info->delalloc_lock);
-		super_used = btrfs_super_bytes_used(&info->super_copy);
-		btrfs_set_super_bytes_used(&info->super_copy,
-					   super_used - num_bytes);
-
-		/* block accounting for root item */
-		root_used = btrfs_root_used(&root->root_item);
-		btrfs_set_root_used(&root->root_item,
-					   root_used - num_bytes);
-		spin_unlock(&info->delalloc_lock);
-
+		ret = pin_down_bytes(trans, root, path, bytenr,
+				     num_bytes, is_data, &must_clean);
+		if (ret > 0)
+			mark_free = 1;
+		BUG_ON(ret < 0);
 		/*
 		 * it is going to be very rare for someone to be waiting
 		 * on the block we're freeing.  del_items might need to
@@ -2403,7 +3303,7 @@ static int __free_extent(struct btrfs_trans_handle *trans,
 			free_extent_buffer(must_clean);
 		}
 
-		if (owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) {
+		if (is_data) {
 			ret = btrfs_del_csums(trans, root, bytenr, num_bytes);
 			BUG_ON(ret);
 		} else {
@@ -2421,34 +3321,6 @@ static int __free_extent(struct btrfs_trans_handle *trans,
 }
 
 /*
- * remove an extent from the root, returns 0 on success
- */
-static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					u64 bytenr, u64 num_bytes, u64 parent,
-					u64 root_objectid, u64 ref_generation,
-					u64 owner_objectid, int pin,
-					int refs_to_drop)
-{
-	WARN_ON(num_bytes < root->sectorsize);
-
-	/*
-	 * if metadata always pin
-	 * if data pin when any transaction has committed this
-	 */
-	if (owner_objectid < BTRFS_FIRST_FREE_OBJECTID ||
-	    ref_generation != trans->transid)
-		pin = 1;
-
-	if (ref_generation != trans->transid)
-		pin = 1;
-
-	return __free_extent(trans, root, bytenr, num_bytes, parent,
-			    root_objectid, ref_generation,
-			    owner_objectid, pin, pin == 0, refs_to_drop);
-}
-
-/*
  * when we free an extent, it is possible (and likely) that we free the last
  * delayed ref for that extent as well.  This searches the delayed ref tree for
  * a given extent, and if there are no other delayed refs to be processed, it
@@ -2479,6 +3351,13 @@ static noinline int check_ref_cleanup(struct btrfs_trans_handle *trans,
 	if (ref->bytenr == bytenr)
 		goto out;
 
+	if (head->extent_op) {
+		if (!head->must_insert_reserved)
+			goto out;
+		kfree(head->extent_op);
+		head->extent_op = NULL;
+	}
+
 	/*
 	 * waiting for the lock here would deadlock.  If someone else has it
 	 * locked they are already in the process of dropping it anyway
@@ -2507,7 +3386,8 @@ static noinline int check_ref_cleanup(struct btrfs_trans_handle *trans,
 	spin_unlock(&delayed_refs->lock);
 
 	ret = run_one_delayed_ref(trans, root->fs_info->tree_root,
-				  &head->node, head->must_insert_reserved);
+				  &head->node, head->extent_op,
+				  head->must_insert_reserved);
 	BUG_ON(ret);
 	btrfs_put_delayed_ref(&head->node);
 	return 0;
@@ -2519,32 +3399,32 @@ out:
 int btrfs_free_extent(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      u64 bytenr, u64 num_bytes, u64 parent,
-		      u64 root_objectid, u64 ref_generation,
-		      u64 owner_objectid, int pin)
+		      u64 root_objectid, u64 owner, u64 offset)
 {
 	int ret;
 
 	/*
 	 * tree log blocks never actually go into the extent allocation
 	 * tree, just update pinning info and exit early.
-	 *
-	 * data extents referenced by the tree log do need to have
-	 * their reference counts bumped.
 	 */
-	if (root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID &&
-	    owner_objectid < BTRFS_FIRST_FREE_OBJECTID) {
+	if (root_objectid == BTRFS_TREE_LOG_OBJECTID) {
+		WARN_ON(owner >= BTRFS_FIRST_FREE_OBJECTID);
 		/* unlocks the pinned mutex */
 		btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
 		update_reserved_extents(root, bytenr, num_bytes, 0);
 		ret = 0;
-	} else {
-		ret = btrfs_add_delayed_ref(trans, bytenr, num_bytes, parent,
-				       root_objectid, ref_generation,
-				       owner_objectid,
-				       BTRFS_DROP_DELAYED_REF, 1);
+	} else if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		ret = btrfs_add_delayed_tree_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, (int)owner,
+					BTRFS_DROP_DELAYED_REF, NULL);
 		BUG_ON(ret);
 		ret = check_ref_cleanup(trans, root, bytenr);
 		BUG_ON(ret);
+	} else {
+		ret = btrfs_add_delayed_data_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, owner,
+					offset, BTRFS_DROP_DELAYED_REF, NULL);
+		BUG_ON(ret);
 	}
 	return ret;
 }
@@ -2719,7 +3599,7 @@ refill_cluster:
 			last_ptr_loop = 0;
 
 			/* allocate a cluster in this block group */
-			ret = btrfs_find_space_cluster(trans,
+			ret = btrfs_find_space_cluster(trans, root,
 					       block_group, last_ptr,
 					       offset, num_bytes,
 					       empty_cluster + empty_size);
@@ -2969,99 +3849,147 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
-static int __btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-					 struct btrfs_root *root, u64 parent,
-					 u64 root_objectid, u64 ref_generation,
-					 u64 owner, struct btrfs_key *ins,
-					 int ref_mod)
+static int alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *root,
+				      u64 parent, u64 root_objectid,
+				      u64 flags, u64 owner, u64 offset,
+				      struct btrfs_key *ins, int ref_mod)
 {
 	int ret;
-	u64 super_used;
-	u64 root_used;
-	u64 num_bytes = ins->offset;
-	u32 sizes[2];
-	struct btrfs_fs_info *info = root->fs_info;
-	struct btrfs_root *extent_root = info->extent_root;
+	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct btrfs_extent_item *extent_item;
-	struct btrfs_extent_ref *ref;
+	struct btrfs_extent_inline_ref *iref;
 	struct btrfs_path *path;
-	struct btrfs_key keys[2];
-
-	if (parent == 0)
-		parent = ins->objectid;
-
-	/* block accounting for super block */
-	spin_lock(&info->delalloc_lock);
-	super_used = btrfs_super_bytes_used(&info->super_copy);
-	btrfs_set_super_bytes_used(&info->super_copy, super_used + num_bytes);
+	struct extent_buffer *leaf;
+	int type;
+	u32 size;
 
-	/* block accounting for root item */
-	root_used = btrfs_root_used(&root->root_item);
-	btrfs_set_root_used(&root->root_item, root_used + num_bytes);
-	spin_unlock(&info->delalloc_lock);
+	if (parent > 0)
+		type = BTRFS_SHARED_DATA_REF_KEY;
+	else
+		type = BTRFS_EXTENT_DATA_REF_KEY;
 
-	memcpy(&keys[0], ins, sizeof(*ins));
-	keys[1].objectid = ins->objectid;
-	keys[1].type = BTRFS_EXTENT_REF_KEY;
-	keys[1].offset = parent;
-	sizes[0] = sizeof(*extent_item);
-	sizes[1] = sizeof(*ref);
+	size = sizeof(*extent_item) + btrfs_extent_inline_ref_size(type);
 
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
 	path->leave_spinning = 1;
-	ret = btrfs_insert_empty_items(trans, extent_root, path, keys,
-				       sizes, 2);
+	ret = btrfs_insert_empty_item(trans, fs_info->extent_root, path,
+				      ins, size);
 	BUG_ON(ret);
 
-	extent_item = btrfs_item_ptr(path->nodes[0], path->slots[0],
+	leaf = path->nodes[0];
+	extent_item = btrfs_item_ptr(leaf, path->slots[0],
 				     struct btrfs_extent_item);
-	btrfs_set_extent_refs(path->nodes[0], extent_item, ref_mod);
-	ref = btrfs_item_ptr(path->nodes[0], path->slots[0] + 1,
-			     struct btrfs_extent_ref);
-
-	btrfs_set_ref_root(path->nodes[0], ref, root_objectid);
-	btrfs_set_ref_generation(path->nodes[0], ref, ref_generation);
-	btrfs_set_ref_objectid(path->nodes[0], ref, owner);
-	btrfs_set_ref_num_refs(path->nodes[0], ref, ref_mod);
+	btrfs_set_extent_refs(leaf, extent_item, ref_mod);
+	btrfs_set_extent_generation(leaf, extent_item, trans->transid);
+	btrfs_set_extent_flags(leaf, extent_item,
+			       flags | BTRFS_EXTENT_FLAG_DATA);
+
+	iref = (struct btrfs_extent_inline_ref *)(extent_item + 1);
+	btrfs_set_extent_inline_ref_type(leaf, iref, type);
+	if (parent > 0) {
+		struct btrfs_shared_data_ref *ref;
+		ref = (struct btrfs_shared_data_ref *)(iref + 1);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+		btrfs_set_shared_data_ref_count(leaf, ref, ref_mod);
+	} else {
+		struct btrfs_extent_data_ref *ref;
+		ref = (struct btrfs_extent_data_ref *)(&iref->offset);
+		btrfs_set_extent_data_ref_root(leaf, ref, root_objectid);
+		btrfs_set_extent_data_ref_objectid(leaf, ref, owner);
+		btrfs_set_extent_data_ref_offset(leaf, ref, offset);
+		btrfs_set_extent_data_ref_count(leaf, ref, ref_mod);
+	}
 
 	btrfs_mark_buffer_dirty(path->nodes[0]);
-
-	trans->alloc_exclude_start = 0;
-	trans->alloc_exclude_nr = 0;
 	btrfs_free_path(path);
 
-	if (ret)
-		goto out;
-
-	ret = update_block_group(trans, root, ins->objectid,
-				 ins->offset, 1, 0);
+	ret = update_block_group(trans, root, ins->objectid, ins->offset,
+				 1, 0);
 	if (ret) {
 		printk(KERN_ERR "btrfs update block group failed for %llu "
 		       "%llu\n", (unsigned long long)ins->objectid,
 		       (unsigned long long)ins->offset);
 		BUG();
 	}
-out:
 	return ret;
 }
 
-int btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins)
+static int alloc_reserved_tree_block(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 parent, u64 root_objectid,
+				     u64 flags, struct btrfs_disk_key *key,
+				     int level, struct btrfs_key *ins)
 {
 	int ret;
+	struct btrfs_fs_info *fs_info = root->fs_info;
+	struct btrfs_extent_item *extent_item;
+	struct btrfs_tree_block_info *block_info;
+	struct btrfs_extent_inline_ref *iref;
+	struct btrfs_path *path;
+	struct extent_buffer *leaf;
+	u32 size = sizeof(*extent_item) + sizeof(*block_info) + sizeof(*iref);
 
-	if (root_objectid == BTRFS_TREE_LOG_OBJECTID)
-		return 0;
+	path = btrfs_alloc_path();
+	BUG_ON(!path);
 
-	ret = btrfs_add_delayed_ref(trans, ins->objectid,
-				    ins->offset, parent, root_objectid,
-				    ref_generation, owner,
-				    BTRFS_ADD_DELAYED_EXTENT, 0);
+	path->leave_spinning = 1;
+	ret = btrfs_insert_empty_item(trans, fs_info->extent_root, path,
+				      ins, size);
 	BUG_ON(ret);
+
+	leaf = path->nodes[0];
+	extent_item = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_extent_item);
+	btrfs_set_extent_refs(leaf, extent_item, 1);
+	btrfs_set_extent_generation(leaf, extent_item, trans->transid);
+	btrfs_set_extent_flags(leaf, extent_item,
+			       flags | BTRFS_EXTENT_FLAG_TREE_BLOCK);
+	block_info = (struct btrfs_tree_block_info *)(extent_item + 1);
+
+	btrfs_set_tree_block_key(leaf, block_info, key);
+	btrfs_set_tree_block_level(leaf, block_info, level);
+
+	iref = (struct btrfs_extent_inline_ref *)(block_info + 1);
+	if (parent > 0) {
+		BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+		btrfs_set_extent_inline_ref_type(leaf, iref,
+						 BTRFS_SHARED_BLOCK_REF_KEY);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+	} else {
+		btrfs_set_extent_inline_ref_type(leaf, iref,
+						 BTRFS_TREE_BLOCK_REF_KEY);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, root_objectid);
+	}
+
+	btrfs_mark_buffer_dirty(leaf);
+	btrfs_free_path(path);
+
+	ret = update_block_group(trans, root, ins->objectid, ins->offset,
+				 1, 0);
+	if (ret) {
+		printk(KERN_ERR "btrfs update block group failed for %llu "
+		       "%llu\n", (unsigned long long)ins->objectid,
+		       (unsigned long long)ins->offset);
+		BUG();
+	}
+	return ret;
+}
+
+int btrfs_alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 root_objectid, u64 owner,
+				     u64 offset, struct btrfs_key *ins)
+{
+	int ret;
+
+	BUG_ON(root_objectid == BTRFS_TREE_LOG_OBJECTID);
+
+	ret = btrfs_add_delayed_data_ref(trans, ins->objectid, ins->offset,
+					 0, root_objectid, owner, offset,
+					 BTRFS_ADD_DELAYED_EXTENT, NULL);
 	return ret;
 }
 
@@ -3070,10 +3998,10 @@ int btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
  * an extent has been allocated and makes sure to clear the free
  * space cache bits as well
  */
-int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins)
+int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   u64 root_objectid, u64 owner, u64 offset,
+				   struct btrfs_key *ins)
 {
 	int ret;
 	struct btrfs_block_group_cache *block_group;
@@ -3087,8 +4015,8 @@ int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
 				      ins->offset);
 	BUG_ON(ret);
 	btrfs_put_block_group(block_group);
-	ret = __btrfs_alloc_reserved_extent(trans, root, parent, root_objectid,
-					    ref_generation, owner, ins, 1);
+	ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
+					 0, owner, offset, ins, 1);
 	return ret;
 }
 
@@ -3099,26 +4027,48 @@ int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
  *
  * returns 0 if everything worked, non-zero otherwise.
  */
-int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
-		       struct btrfs_root *root,
-		       u64 num_bytes, u64 parent, u64 min_alloc_size,
-		       u64 root_objectid, u64 ref_generation,
-		       u64 owner_objectid, u64 empty_size, u64 hint_byte,
-		       u64 search_end, struct btrfs_key *ins, u64 data)
+static int alloc_tree_block(struct btrfs_trans_handle *trans,
+			    struct btrfs_root *root,
+			    u64 num_bytes, u64 parent, u64 root_objectid,
+			    struct btrfs_disk_key *key, int level,
+			    u64 empty_size, u64 hint_byte, u64 search_end,
+			    struct btrfs_key *ins)
 {
 	int ret;
-	ret = __btrfs_reserve_extent(trans, root, num_bytes,
-				     min_alloc_size, empty_size, hint_byte,
-				     search_end, ins, data);
+	u64 flags = 0;
+
+	ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
+				     empty_size, hint_byte, search_end,
+				     ins, 0);
 	BUG_ON(ret);
+
+	if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
+		if (parent == 0)
+			parent = ins->objectid;
+		flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
+	} else
+		BUG_ON(parent > 0);
+
+	update_reserved_extents(root, ins->objectid, ins->offset, 1);
 	if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
-		ret = btrfs_add_delayed_ref(trans, ins->objectid,
-					    ins->offset, parent, root_objectid,
-					    ref_generation, owner_objectid,
-					    BTRFS_ADD_DELAYED_EXTENT, 0);
+		struct btrfs_delayed_extent_op *extent_op;
+		extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
+		BUG_ON(!extent_op);
+		if (key)
+			memcpy(&extent_op->key, key, sizeof(extent_op->key));
+		else
+			memset(&extent_op->key, 0, sizeof(extent_op->key));
+		extent_op->flags_to_set = flags;
+		extent_op->update_key = 1;
+		extent_op->update_flags = 1;
+		extent_op->is_data = 0;
+
+		ret = btrfs_add_delayed_tree_ref(trans, ins->objectid,
+					ins->offset, parent, root_objectid,
+					level, BTRFS_ADD_DELAYED_EXTENT,
+					extent_op);
 		BUG_ON(ret);
 	}
-	update_reserved_extents(root, ins->objectid, ins->offset, 1);
 	return ret;
 }
 
@@ -3157,21 +4107,17 @@ struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
  * returns the tree buffer or NULL.
  */
 struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
-					     struct btrfs_root *root,
-					     u32 blocksize, u64 parent,
-					     u64 root_objectid,
-					     u64 ref_generation,
-					     int level,
-					     u64 hint,
-					     u64 empty_size)
+					struct btrfs_root *root, u32 blocksize,
+					u64 parent, u64 root_objectid,
+					struct btrfs_disk_key *key, int level,
+					u64 hint, u64 empty_size)
 {
 	struct btrfs_key ins;
 	int ret;
 	struct extent_buffer *buf;
 
-	ret = btrfs_alloc_extent(trans, root, blocksize, parent, blocksize,
-				 root_objectid, ref_generation, level,
-				 empty_size, hint, (u64)-1, &ins, 0);
+	ret = alloc_tree_block(trans, root, blocksize, parent, root_objectid,
+			       key, level, empty_size, hint, (u64)-1, &ins);
 	if (ret) {
 		BUG_ON(ret > 0);
 		return ERR_PTR(ret);
@@ -3185,32 +4131,19 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root, struct extent_buffer *leaf)
 {
-	u64 leaf_owner;
-	u64 leaf_generation;
-	struct refsort *sorted;
+	u64 disk_bytenr;
+	u64 num_bytes;
 	struct btrfs_key key;
 	struct btrfs_file_extent_item *fi;
+	u32 nritems;
 	int i;
-	int nritems;
 	int ret;
-	int refi = 0;
-	int slot;
 
 	BUG_ON(!btrfs_is_leaf(leaf));
 	nritems = btrfs_header_nritems(leaf);
-	leaf_owner = btrfs_header_owner(leaf);
-	leaf_generation = btrfs_header_generation(leaf);
 
-	sorted = kmalloc(sizeof(*sorted) * nritems, GFP_NOFS);
-	/* we do this loop twice.  The first time we build a list
-	 * of the extents we have a reference on, then we sort the list
-	 * by bytenr.  The second time around we actually do the
-	 * extent freeing.
-	 */
 	for (i = 0; i < nritems; i++) {
-		u64 disk_bytenr;
 		cond_resched();
-
 		btrfs_item_key_to_cpu(leaf, &key, i);
 
 		/* only extents have references, skip everything else */
@@ -3230,45 +4163,16 @@ int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 		if (disk_bytenr == 0)
 			continue;
 
-		sorted[refi].bytenr = disk_bytenr;
-		sorted[refi].slot = i;
-		refi++;
-	}
-
-	if (refi == 0)
-		goto out;
-
-	sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
-
-	for (i = 0; i < refi; i++) {
-		u64 disk_bytenr;
-
-		disk_bytenr = sorted[i].bytenr;
-		slot = sorted[i].slot;
-
-		cond_resched();
-
-		btrfs_item_key_to_cpu(leaf, &key, slot);
-		if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
-			continue;
-
-		fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
-
-		ret = btrfs_free_extent(trans, root, disk_bytenr,
-				btrfs_file_extent_disk_num_bytes(leaf, fi),
-				leaf->start, leaf_owner, leaf_generation,
-				key.objectid, 0);
+		num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
+		ret = btrfs_free_extent(trans, root, disk_bytenr, num_bytes,
+					leaf->start, 0, key.objectid, 0);
 		BUG_ON(ret);
-
-		atomic_inc(&root->fs_info->throttle_gen);
-		wake_up(&root->fs_info->transaction_throttle);
-		cond_resched();
 	}
-out:
-	kfree(sorted);
 	return 0;
 }
 
+#if 0
+
 static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
 					struct btrfs_root *root,
 					struct btrfs_leaf_ref *ref)
@@ -3311,13 +4215,14 @@ static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
+
 static int drop_snap_lookup_refcount(struct btrfs_trans_handle *trans,
 				     struct btrfs_root *root, u64 start,
 				     u64 len, u32 *refs)
 {
 	int ret;
 
-	ret = btrfs_lookup_extent_ref(trans, root, start, len, refs);
+	ret = btrfs_lookup_extent_refs(trans, root, start, len, refs);
 	BUG_ON(ret);
 
 #if 0 /* some debugging code in case we see problems here */
@@ -3352,6 +4257,7 @@ static int drop_snap_lookup_refcount(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
+
 /*
  * this is used while deleting old snapshots, and it drops the refs
  * on a whole subtree starting from a level 1 node.
@@ -3645,32 +4551,36 @@ out:
 	cond_resched();
 	return 0;
 }
+#endif
 
 /*
  * helper function for drop_subtree, this function is similar to
  * walk_down_tree. The main difference is that it checks reference
  * counts while tree blocks are locked.
  */
-static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
-				      struct btrfs_root *root,
-				      struct btrfs_path *path, int *level)
+static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct btrfs_path *path, int *level)
 {
 	struct extent_buffer *next;
 	struct extent_buffer *cur;
 	struct extent_buffer *parent;
 	u64 bytenr;
 	u64 ptr_gen;
+	u64 refs;
+	u64 flags;
 	u32 blocksize;
-	u32 refs;
 	int ret;
 
 	cur = path->nodes[*level];
-	ret = btrfs_lookup_extent_ref(trans, root, cur->start, cur->len,
-				      &refs);
+	ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len,
+				       &refs, &flags);
 	BUG_ON(ret);
 	if (refs > 1)
 		goto out;
 
+	BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+
 	while (*level >= 0) {
 		cur = path->nodes[*level];
 		if (*level == 0) {
@@ -3692,16 +4602,15 @@ static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
 		btrfs_tree_lock(next);
 		btrfs_set_lock_blocking(next);
 
-		ret = btrfs_lookup_extent_ref(trans, root, bytenr, blocksize,
-					      &refs);
+		ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+					       &refs, &flags);
 		BUG_ON(ret);
 		if (refs > 1) {
 			parent = path->nodes[*level];
 			ret = btrfs_free_extent(trans, root, bytenr,
-					blocksize, parent->start,
-					btrfs_header_owner(parent),
-					btrfs_header_generation(parent),
-					*level - 1, 1);
+						blocksize, parent->start,
+						btrfs_header_owner(parent),
+						*level - 1, 0);
 			BUG_ON(ret);
 			path->slots[*level]++;
 			btrfs_tree_unlock(next);
@@ -3709,6 +4618,8 @@ static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
 			continue;
 		}
 
+		BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+
 		*level = btrfs_header_level(next);
 		path->nodes[*level] = next;
 		path->slots[*level] = 0;
@@ -3716,13 +4627,15 @@ static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
 		cond_resched();
 	}
 out:
-	parent = path->nodes[*level + 1];
+	if (path->nodes[*level] == root->node)
+		parent = path->nodes[*level];
+	else
+		parent = path->nodes[*level + 1];
 	bytenr = path->nodes[*level]->start;
 	blocksize = path->nodes[*level]->len;
 
-	ret = btrfs_free_extent(trans, root, bytenr, blocksize,
-			parent->start, btrfs_header_owner(parent),
-			btrfs_header_generation(parent), *level, 1);
+	ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start,
+				btrfs_header_owner(parent), *level, 0);
 	BUG_ON(ret);
 
 	if (path->locks[*level]) {
@@ -3746,8 +4659,6 @@ static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 				 struct btrfs_path *path,
 				 int *level, int max_level)
 {
-	u64 root_owner;
-	u64 root_gen;
 	struct btrfs_root_item *root_item = &root->root_item;
 	int i;
 	int slot;
@@ -3755,24 +4666,22 @@ static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 
 	for (i = *level; i < max_level && path->nodes[i]; i++) {
 		slot = path->slots[i];
-		if (slot < btrfs_header_nritems(path->nodes[i]) - 1) {
-			struct extent_buffer *node;
-			struct btrfs_disk_key disk_key;
-
+		if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
 			/*
 			 * there is more work to do in this level.
 			 * Update the drop_progress marker to reflect
 			 * the work we've done so far, and then bump
 			 * the slot number
 			 */
-			node = path->nodes[i];
 			path->slots[i]++;
-			*level = i;
 			WARN_ON(*level == 0);
-			btrfs_node_key(node, &disk_key, path->slots[i]);
-			memcpy(&root_item->drop_progress,
-			       &disk_key, sizeof(disk_key));
-			root_item->drop_level = i;
+			if (max_level == BTRFS_MAX_LEVEL) {
+				btrfs_node_key(path->nodes[i],
+					       &root_item->drop_progress,
+					       path->slots[i]);
+				root_item->drop_level = i;
+			}
+			*level = i;
 			return 0;
 		} else {
 			struct extent_buffer *parent;
@@ -3786,22 +4695,20 @@ static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 			else
 				parent = path->nodes[*level + 1];
 
-			root_owner = btrfs_header_owner(parent);
-			root_gen = btrfs_header_generation(parent);
-
-			clean_tree_block(trans, root, path->nodes[*level]);
+			clean_tree_block(trans, root, path->nodes[i]);
 			ret = btrfs_free_extent(trans, root,
-						path->nodes[*level]->start,
-						path->nodes[*level]->len,
-						parent->start, root_owner,
-						root_gen, *level, 1);
+						path->nodes[i]->start,
+						path->nodes[i]->len,
+						parent->start,
+						btrfs_header_owner(parent),
+						*level, 0);
 			BUG_ON(ret);
 			if (path->locks[*level]) {
-				btrfs_tree_unlock(path->nodes[*level]);
-				path->locks[*level] = 0;
+				btrfs_tree_unlock(path->nodes[i]);
+				path->locks[i] = 0;
 			}
-			free_extent_buffer(path->nodes[*level]);
-			path->nodes[*level] = NULL;
+			free_extent_buffer(path->nodes[i]);
+			path->nodes[i] = NULL;
 			*level = i + 1;
 		}
 	}
@@ -3820,21 +4727,18 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 	int wret;
 	int level;
 	struct btrfs_path *path;
-	int i;
-	int orig_level;
 	int update_count;
 	struct btrfs_root_item *root_item = &root->root_item;
 
-	WARN_ON(!mutex_is_locked(&root->fs_info->drop_mutex));
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
 	level = btrfs_header_level(root->node);
-	orig_level = level;
 	if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
-		path->nodes[level] = root->node;
-		extent_buffer_get(root->node);
+		path->nodes[level] = btrfs_lock_root_node(root);
+		btrfs_set_lock_blocking(path->nodes[level]);
 		path->slots[level] = 0;
+		path->locks[level] = 1;
 	} else {
 		struct btrfs_key key;
 		struct btrfs_disk_key found_key;
@@ -3856,12 +4760,7 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 		 * unlock our path, this is safe because only this
 		 * function is allowed to delete this snapshot
 		 */
-		for (i = 0; i < BTRFS_MAX_LEVEL; i++) {
-			if (path->nodes[i] && path->locks[i]) {
-				path->locks[i] = 0;
-				btrfs_tree_unlock(path->nodes[i]);
-			}
-		}
+		btrfs_unlock_up_safe(path, 0);
 	}
 	while (1) {
 		unsigned long update;
@@ -3882,8 +4781,6 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 			ret = -EAGAIN;
 			break;
 		}
-		atomic_inc(&root->fs_info->throttle_gen);
-		wake_up(&root->fs_info->transaction_throttle);
 		for (update_count = 0; update_count < 16; update_count++) {
 			update = trans->delayed_ref_updates;
 			trans->delayed_ref_updates = 0;
@@ -3893,12 +4790,6 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 				break;
 		}
 	}
-	for (i = 0; i <= orig_level; i++) {
-		if (path->nodes[i]) {
-			free_extent_buffer(path->nodes[i]);
-			path->nodes[i] = NULL;
-		}
-	}
 out:
 	btrfs_free_path(path);
 	return ret;
@@ -3931,7 +4822,7 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 	path->slots[level] = 0;
 
 	while (1) {
-		wret = walk_down_subtree(trans, root, path, &level);
+		wret = walk_down_tree(trans, root, path, &level);
 		if (wret < 0)
 			ret = wret;
 		if (wret != 0)
@@ -3948,6 +4839,7 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
+#if 0
 static unsigned long calc_ra(unsigned long start, unsigned long last,
 			     unsigned long nr)
 {
@@ -5429,6 +6321,7 @@ out:
 	kfree(ref_path);
 	return ret;
 }
+#endif
 
 static u64 update_block_group_flags(struct btrfs_root *root, u64 flags)
 {
@@ -5477,7 +6370,8 @@ static int __alloc_chunk_for_shrink(struct btrfs_root *root,
 	u64 calc;
 
 	spin_lock(&shrink_block_group->lock);
-	if (btrfs_block_group_used(&shrink_block_group->item) > 0) {
+	if (btrfs_block_group_used(&shrink_block_group->item) +
+	    shrink_block_group->reserved > 0) {
 		spin_unlock(&shrink_block_group->lock);
 
 		trans = btrfs_start_transaction(root, 1);
@@ -5502,6 +6396,17 @@ static int __alloc_chunk_for_shrink(struct btrfs_root *root,
 	return 0;
 }
 
+
+int btrfs_prepare_block_group_relocation(struct btrfs_root *root,
+					 struct btrfs_block_group_cache *group)
+
+{
+	__alloc_chunk_for_shrink(root, group, 1);
+	set_block_group_readonly(group);
+	return 0;
+}
+
+#if 0
 static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 u64 objectid, u64 size)
@@ -5781,6 +6686,7 @@ out:
 	btrfs_free_path(path);
 	return ret;
 }
+#endif
 
 static int find_first_block_group(struct btrfs_root *root,
 		struct btrfs_path *path, struct btrfs_key *key)
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index fe9eb990e44..68260180f58 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -476,6 +476,7 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
 	struct extent_state *state;
 	struct extent_state *prealloc = NULL;
 	struct rb_node *node;
+	u64 last_end;
 	int err;
 	int set = 0;
 
@@ -498,6 +499,7 @@ again:
 	if (state->start > end)
 		goto out;
 	WARN_ON(state->end < start);
+	last_end = state->end;
 
 	/*
 	 *     | ---- desired range ---- |
@@ -524,9 +526,11 @@ again:
 		if (err)
 			goto out;
 		if (state->end <= end) {
-			start = state->end + 1;
 			set |= clear_state_bit(tree, state, bits,
 					wake, delete);
+			if (last_end == (u64)-1)
+				goto out;
+			start = last_end + 1;
 		} else {
 			start = state->start;
 		}
@@ -552,8 +556,10 @@ again:
 		goto out;
 	}
 
-	start = state->end + 1;
 	set |= clear_state_bit(tree, state, bits, wake, delete);
+	if (last_end == (u64)-1)
+		goto out;
+	start = last_end + 1;
 	goto search_again;
 
 out:
@@ -707,8 +713,10 @@ again:
 			goto out;
 		}
 		set_state_bits(tree, state, bits);
-		start = state->end + 1;
 		merge_state(tree, state);
+		if (last_end == (u64)-1)
+			goto out;
+		start = last_end + 1;
 		goto search_again;
 	}
 
@@ -742,8 +750,10 @@ again:
 			goto out;
 		if (state->end <= end) {
 			set_state_bits(tree, state, bits);
-			start = state->end + 1;
 			merge_state(tree, state);
+			if (last_end == (u64)-1)
+				goto out;
+			start = last_end + 1;
 		} else {
 			start = state->start;
 		}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 1d51dc38bb4..126477eaecf 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -291,16 +291,12 @@ noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
 {
 	u64 extent_end = 0;
 	u64 search_start = start;
-	u64 leaf_start;
 	u64 ram_bytes = 0;
-	u64 orig_parent = 0;
 	u64 disk_bytenr = 0;
 	u64 orig_locked_end = locked_end;
 	u8 compression;
 	u8 encryption;
 	u16 other_encoding = 0;
-	u64 root_gen;
-	u64 root_owner;
 	struct extent_buffer *leaf;
 	struct btrfs_file_extent_item *extent;
 	struct btrfs_path *path;
@@ -340,9 +336,6 @@ next_slot:
 		bookend = 0;
 		found_extent = 0;
 		found_inline = 0;
-		leaf_start = 0;
-		root_gen = 0;
-		root_owner = 0;
 		compression = 0;
 		encryption = 0;
 		extent = NULL;
@@ -417,9 +410,6 @@ next_slot:
 		if (found_extent) {
 			read_extent_buffer(leaf, &old, (unsigned long)extent,
 					   sizeof(old));
-			root_gen = btrfs_header_generation(leaf);
-			root_owner = btrfs_header_owner(leaf);
-			leaf_start = leaf->start;
 		}
 
 		if (end < extent_end && end >= key.offset) {
@@ -443,14 +433,14 @@ next_slot:
 				}
 				locked_end = extent_end;
 			}
-			orig_parent = path->nodes[0]->start;
 			disk_bytenr = le64_to_cpu(old.disk_bytenr);
 			if (disk_bytenr != 0) {
 				ret = btrfs_inc_extent_ref(trans, root,
 					   disk_bytenr,
-					   le64_to_cpu(old.disk_num_bytes),
-					   orig_parent, root->root_key.objectid,
-					   trans->transid, inode->i_ino);
+					   le64_to_cpu(old.disk_num_bytes), 0,
+					   root->root_key.objectid,
+					   key.objectid, key.offset -
+					   le64_to_cpu(old.offset));
 				BUG_ON(ret);
 			}
 		}
@@ -568,17 +558,6 @@ next_slot:
 			btrfs_mark_buffer_dirty(path->nodes[0]);
 			btrfs_set_lock_blocking(path->nodes[0]);
 
-			if (disk_bytenr != 0) {
-				ret = btrfs_update_extent_ref(trans, root,
-						disk_bytenr,
-						le64_to_cpu(old.disk_num_bytes),
-						orig_parent,
-						leaf->start,
-						root->root_key.objectid,
-						trans->transid, ins.objectid);
-
-				BUG_ON(ret);
-			}
 			path->leave_spinning = 0;
 			btrfs_release_path(root, path);
 			if (disk_bytenr != 0)
@@ -594,8 +573,9 @@ next_slot:
 				ret = btrfs_free_extent(trans, root,
 						old_disk_bytenr,
 						le64_to_cpu(old.disk_num_bytes),
-						leaf_start, root_owner,
-						root_gen, key.objectid, 0);
+						0, root->root_key.objectid,
+						key.objectid, key.offset -
+						le64_to_cpu(old.offset));
 				BUG_ON(ret);
 				*hint_byte = old_disk_bytenr;
 			}
@@ -664,12 +644,11 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
 	u64 bytenr;
 	u64 num_bytes;
 	u64 extent_end;
-	u64 extent_offset;
+	u64 orig_offset;
 	u64 other_start;
 	u64 other_end;
 	u64 split = start;
 	u64 locked_end = end;
-	u64 orig_parent;
 	int extent_type;
 	int split_end = 1;
 	int ret;
@@ -703,7 +682,7 @@ again:
 
 	bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
 	num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
-	extent_offset = btrfs_file_extent_offset(leaf, fi);
+	orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi);
 
 	if (key.offset == start)
 		split = end;
@@ -711,8 +690,6 @@ again:
 	if (key.offset == start && extent_end == end) {
 		int del_nr = 0;
 		int del_slot = 0;
-		u64 leaf_owner = btrfs_header_owner(leaf);
-		u64 leaf_gen = btrfs_header_generation(leaf);
 		other_start = end;
 		other_end = 0;
 		if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino,
@@ -721,8 +698,8 @@ again:
 			del_slot = path->slots[0] + 1;
 			del_nr++;
 			ret = btrfs_free_extent(trans, root, bytenr, num_bytes,
-						leaf->start, leaf_owner,
-						leaf_gen, inode->i_ino, 0);
+						0, root->root_key.objectid,
+						inode->i_ino, orig_offset);
 			BUG_ON(ret);
 		}
 		other_start = 0;
@@ -733,8 +710,8 @@ again:
 			del_slot = path->slots[0];
 			del_nr++;
 			ret = btrfs_free_extent(trans, root, bytenr, num_bytes,
-						leaf->start, leaf_owner,
-						leaf_gen, inode->i_ino, 0);
+						0, root->root_key.objectid,
+						inode->i_ino, orig_offset);
 			BUG_ON(ret);
 		}
 		split_end = 0;
@@ -768,13 +745,12 @@ again:
 			locked_end = extent_end;
 		}
 		btrfs_set_file_extent_num_bytes(leaf, fi, split - key.offset);
-		extent_offset += split - key.offset;
 	} else  {
 		BUG_ON(key.offset != start);
-		btrfs_set_file_extent_offset(leaf, fi, extent_offset +
-					     split - key.offset);
-		btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - split);
 		key.offset = split;
+		btrfs_set_file_extent_offset(leaf, fi, key.offset -
+					     orig_offset);
+		btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - split);
 		btrfs_set_item_key_safe(trans, root, path, &key);
 		extent_end = split;
 	}
@@ -793,7 +769,8 @@ again:
 					    struct btrfs_file_extent_item);
 			key.offset = split;
 			btrfs_set_item_key_safe(trans, root, path, &key);
-			btrfs_set_file_extent_offset(leaf, fi, extent_offset);
+			btrfs_set_file_extent_offset(leaf, fi, key.offset -
+						     orig_offset);
 			btrfs_set_file_extent_num_bytes(leaf, fi,
 							other_end - split);
 			goto done;
@@ -815,10 +792,9 @@ again:
 
 	btrfs_mark_buffer_dirty(leaf);
 
-	orig_parent = leaf->start;
-	ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes,
-				   orig_parent, root->root_key.objectid,
-				   trans->transid, inode->i_ino);
+	ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0,
+				   root->root_key.objectid,
+				   inode->i_ino, orig_offset);
 	BUG_ON(ret);
 	btrfs_release_path(root, path);
 
@@ -833,20 +809,12 @@ again:
 	btrfs_set_file_extent_type(leaf, fi, extent_type);
 	btrfs_set_file_extent_disk_bytenr(leaf, fi, bytenr);
 	btrfs_set_file_extent_disk_num_bytes(leaf, fi, num_bytes);
-	btrfs_set_file_extent_offset(leaf, fi, extent_offset);
+	btrfs_set_file_extent_offset(leaf, fi, key.offset - orig_offset);
 	btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - key.offset);
 	btrfs_set_file_extent_ram_bytes(leaf, fi, num_bytes);
 	btrfs_set_file_extent_compression(leaf, fi, 0);
 	btrfs_set_file_extent_encryption(leaf, fi, 0);
 	btrfs_set_file_extent_other_encoding(leaf, fi, 0);
-
-	if (orig_parent != leaf->start) {
-		ret = btrfs_update_extent_ref(trans, root, bytenr, num_bytes,
-					      orig_parent, leaf->start,
-					      root->root_key.objectid,
-					      trans->transid, inode->i_ino);
-		BUG_ON(ret);
-	}
 done:
 	btrfs_mark_buffer_dirty(leaf);
 
@@ -1189,6 +1157,8 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 	btrfs_wait_ordered_range(inode, 0, (u64)-1);
 	root->log_batch++;
 
+	if (datasync && !(inode->i_state & I_DIRTY_PAGES))
+		goto out;
 	/*
 	 * ok we haven't committed the transaction yet, lets do a commit
 	 */
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 0bc93657b46..4538e48581a 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -579,6 +579,7 @@ out:
  * it returns -enospc
  */
 int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root,
 			     struct btrfs_block_group_cache *block_group,
 			     struct btrfs_free_cluster *cluster,
 			     u64 offset, u64 bytes, u64 empty_size)
@@ -595,7 +596,9 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
 	int ret;
 
 	/* for metadata, allow allocates with more holes */
-	if (block_group->flags & BTRFS_BLOCK_GROUP_METADATA) {
+	if (btrfs_test_opt(root, SSD_SPREAD)) {
+		min_bytes = bytes + empty_size;
+	} else if (block_group->flags & BTRFS_BLOCK_GROUP_METADATA) {
 		/*
 		 * we want to do larger allocations when we are
 		 * flushing out the delayed refs, it helps prevent
@@ -645,14 +648,15 @@ again:
 		 * we haven't filled the empty size and the window is
 		 * very large.  reset and try again
 		 */
-		if (next->offset - window_start > (bytes + empty_size) * 2) {
+		if (next->offset - (last->offset + last->bytes) > 128 * 1024 ||
+		    next->offset - window_start > (bytes + empty_size) * 2) {
 			entry = next;
 			window_start = entry->offset;
 			window_free = entry->bytes;
 			last = entry;
 			max_extent = 0;
 			total_retries++;
-			if (total_retries % 256 == 0) {
+			if (total_retries % 64 == 0) {
 				if (min_bytes >= (bytes + empty_size)) {
 					ret = -ENOSPC;
 					goto out;
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index ab0bdc0a63c..266fb876405 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -31,6 +31,7 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
 			   u64 bytes);
 u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group);
 int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root,
 			     struct btrfs_block_group_cache *block_group,
 			     struct btrfs_free_cluster *cluster,
 			     u64 offset, u64 bytes, u64 empty_size);
diff --git a/fs/btrfs/hash.h b/fs/btrfs/hash.h
index 2a020b27676..db2ff9773b9 100644
--- a/fs/btrfs/hash.h
+++ b/fs/btrfs/hash.h
@@ -19,9 +19,9 @@
 #ifndef __HASH__
 #define __HASH__
 
-#include "crc32c.h"
+#include <linux/crc32c.h>
 static inline u64 btrfs_name_hash(const char *name, int len)
 {
-	return btrfs_crc32c((u32)~1, name, len);
+	return crc32c((u32)~1, name, len);
 }
 #endif
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 1c8b0190d03..8612b3a0981 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -48,7 +48,6 @@
 #include "ordered-data.h"
 #include "xattr.h"
 #include "tree-log.h"
-#include "ref-cache.h"
 #include "compression.h"
 #include "locking.h"
 
@@ -369,7 +368,7 @@ again:
 	 * inode has not been flagged as nocompress.  This flag can
 	 * change at any time if we discover bad compression ratios.
 	 */
-	if (!btrfs_test_flag(inode, NOCOMPRESS) &&
+	if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NOCOMPRESS) &&
 	    btrfs_test_opt(root, COMPRESS)) {
 		WARN_ON(pages);
 		pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS);
@@ -470,7 +469,7 @@ again:
 		nr_pages_ret = 0;
 
 		/* flag the file so we don't compress in the future */
-		btrfs_set_flag(inode, NOCOMPRESS);
+		BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
 	}
 	if (will_compress) {
 		*num_added += 1;
@@ -863,7 +862,7 @@ static int cow_file_range_async(struct inode *inode, struct page *locked_page,
 		async_cow->locked_page = locked_page;
 		async_cow->start = start;
 
-		if (btrfs_test_flag(inode, NOCOMPRESS))
+		if (BTRFS_I(inode)->flags & BTRFS_INODE_NOCOMPRESS)
 			cur_end = end;
 		else
 			cur_end = min(end, start + 512 * 1024 - 1);
@@ -944,6 +943,7 @@ static noinline int run_delalloc_nocow(struct inode *inode,
 	u64 cow_start;
 	u64 cur_offset;
 	u64 extent_end;
+	u64 extent_offset;
 	u64 disk_bytenr;
 	u64 num_bytes;
 	int extent_type;
@@ -1005,6 +1005,7 @@ next_slot:
 		if (extent_type == BTRFS_FILE_EXTENT_REG ||
 		    extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
 			disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+			extent_offset = btrfs_file_extent_offset(leaf, fi);
 			extent_end = found_key.offset +
 				btrfs_file_extent_num_bytes(leaf, fi);
 			if (extent_end <= start) {
@@ -1022,9 +1023,10 @@ next_slot:
 			if (btrfs_extent_readonly(root, disk_bytenr))
 				goto out_check;
 			if (btrfs_cross_ref_exist(trans, root, inode->i_ino,
-						  disk_bytenr))
+						  found_key.offset -
+						  extent_offset, disk_bytenr))
 				goto out_check;
-			disk_bytenr += btrfs_file_extent_offset(leaf, fi);
+			disk_bytenr += extent_offset;
 			disk_bytenr += cur_offset - found_key.offset;
 			num_bytes = min(end + 1, extent_end) - cur_offset;
 			/*
@@ -1131,10 +1133,10 @@ static int run_delalloc_range(struct inode *inode, struct page *locked_page,
 	int ret;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 
-	if (btrfs_test_flag(inode, NODATACOW))
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 1, nr_written);
-	else if (btrfs_test_flag(inode, PREALLOC))
+	else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 0, nr_written);
 	else if (!btrfs_test_opt(root, COMPRESS))
@@ -1288,7 +1290,7 @@ static int btrfs_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
 	int ret = 0;
 	int skip_sum;
 
-	skip_sum = btrfs_test_flag(inode, NODATASUM);
+	skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
 
 	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
 	BUG_ON(ret);
@@ -1489,9 +1491,9 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
 	ins.objectid = disk_bytenr;
 	ins.offset = disk_num_bytes;
 	ins.type = BTRFS_EXTENT_ITEM_KEY;
-	ret = btrfs_alloc_reserved_extent(trans, root, leaf->start,
-					  root->root_key.objectid,
-					  trans->transid, inode->i_ino, &ins);
+	ret = btrfs_alloc_reserved_file_extent(trans, root,
+					root->root_key.objectid,
+					inode->i_ino, file_pos, &ins);
 	BUG_ON(ret);
 	btrfs_free_path(path);
 
@@ -1788,7 +1790,8 @@ static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end,
 		ClearPageChecked(page);
 		goto good;
 	}
-	if (btrfs_test_flag(inode, NODATASUM))
+
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
 		return 0;
 
 	if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
@@ -1956,23 +1959,13 @@ void btrfs_orphan_cleanup(struct btrfs_root *root)
 		 * crossing root thing.  we store the inode number in the
 		 * offset of the orphan item.
 		 */
-		inode = btrfs_iget_locked(root->fs_info->sb,
-					  found_key.offset, root);
-		if (!inode)
+		found_key.objectid = found_key.offset;
+		found_key.type = BTRFS_INODE_ITEM_KEY;
+		found_key.offset = 0;
+		inode = btrfs_iget(root->fs_info->sb, &found_key, root);
+		if (IS_ERR(inode))
 			break;
 
-		if (inode->i_state & I_NEW) {
-			BTRFS_I(inode)->root = root;
-
-			/* have to set the location manually */
-			BTRFS_I(inode)->location.objectid = inode->i_ino;
-			BTRFS_I(inode)->location.type = BTRFS_INODE_ITEM_KEY;
-			BTRFS_I(inode)->location.offset = 0;
-
-			btrfs_read_locked_inode(inode);
-			unlock_new_inode(inode);
-		}
-
 		/*
 		 * add this inode to the orphan list so btrfs_orphan_del does
 		 * the proper thing when we hit it
@@ -2069,7 +2062,7 @@ static noinline int acls_after_inode_item(struct extent_buffer *leaf,
 /*
  * read an inode from the btree into the in-memory inode
  */
-void btrfs_read_locked_inode(struct inode *inode)
+static void btrfs_read_locked_inode(struct inode *inode)
 {
 	struct btrfs_path *path;
 	struct extent_buffer *leaf;
@@ -2164,6 +2157,8 @@ void btrfs_read_locked_inode(struct inode *inode)
 		init_special_inode(inode, inode->i_mode, rdev);
 		break;
 	}
+
+	btrfs_update_iflags(inode);
 	return;
 
 make_bad:
@@ -2327,7 +2322,6 @@ err:
 	btrfs_update_inode(trans, root, dir);
 	btrfs_drop_nlink(inode);
 	ret = btrfs_update_inode(trans, root, inode);
-	dir->i_sb->s_dirt = 1;
 out:
 	return ret;
 }
@@ -2599,9 +2593,8 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 	struct btrfs_file_extent_item *fi;
 	u64 extent_start = 0;
 	u64 extent_num_bytes = 0;
+	u64 extent_offset = 0;
 	u64 item_end = 0;
-	u64 root_gen = 0;
-	u64 root_owner = 0;
 	int found_extent;
 	int del_item;
 	int pending_del_nr = 0;
@@ -2716,6 +2709,9 @@ search_again:
 				extent_num_bytes =
 					btrfs_file_extent_disk_num_bytes(leaf,
 									 fi);
+				extent_offset = found_key.offset -
+					btrfs_file_extent_offset(leaf, fi);
+
 				/* FIXME blocksize != 4096 */
 				num_dec = btrfs_file_extent_num_bytes(leaf, fi);
 				if (extent_start != 0) {
@@ -2723,8 +2719,6 @@ search_again:
 					if (root->ref_cows)
 						inode_sub_bytes(inode, num_dec);
 				}
-				root_gen = btrfs_header_generation(leaf);
-				root_owner = btrfs_header_owner(leaf);
 			}
 		} else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
 			/*
@@ -2768,12 +2762,12 @@ delete:
 		} else {
 			break;
 		}
-		if (found_extent) {
+		if (found_extent && root->ref_cows) {
 			btrfs_set_path_blocking(path);
 			ret = btrfs_free_extent(trans, root, extent_start,
-						extent_num_bytes,
-						leaf->start, root_owner,
-						root_gen, inode->i_ino, 0);
+						extent_num_bytes, 0,
+						btrfs_header_owner(leaf),
+						inode->i_ino, extent_offset);
 			BUG_ON(ret);
 		}
 next:
@@ -2811,7 +2805,6 @@ error:
 				      pending_del_nr);
 	}
 	btrfs_free_path(path);
-	inode->i_sb->s_dirt = 1;
 	return ret;
 }
 
@@ -3105,6 +3098,45 @@ static int fixup_tree_root_location(struct btrfs_root *root,
 	return 0;
 }
 
+static void inode_tree_add(struct inode *inode)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_inode *entry;
+	struct rb_node **p = &root->inode_tree.rb_node;
+	struct rb_node *parent = NULL;
+
+	spin_lock(&root->inode_lock);
+	while (*p) {
+		parent = *p;
+		entry = rb_entry(parent, struct btrfs_inode, rb_node);
+
+		if (inode->i_ino < entry->vfs_inode.i_ino)
+			p = &(*p)->rb_left;
+		else if (inode->i_ino > entry->vfs_inode.i_ino)
+			p = &(*p)->rb_right;
+		else {
+			WARN_ON(!(entry->vfs_inode.i_state &
+				  (I_WILL_FREE | I_FREEING | I_CLEAR)));
+			break;
+		}
+	}
+	rb_link_node(&BTRFS_I(inode)->rb_node, parent, p);
+	rb_insert_color(&BTRFS_I(inode)->rb_node, &root->inode_tree);
+	spin_unlock(&root->inode_lock);
+}
+
+static void inode_tree_del(struct inode *inode)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+
+	if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
+		spin_lock(&root->inode_lock);
+		rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
+		spin_unlock(&root->inode_lock);
+		RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
+	}
+}
+
 static noinline void init_btrfs_i(struct inode *inode)
 {
 	struct btrfs_inode *bi = BTRFS_I(inode);
@@ -3130,6 +3162,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 			     inode->i_mapping, GFP_NOFS);
 	INIT_LIST_HEAD(&BTRFS_I(inode)->delalloc_inodes);
 	INIT_LIST_HEAD(&BTRFS_I(inode)->ordered_operations);
+	RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
 	btrfs_ordered_inode_tree_init(&BTRFS_I(inode)->ordered_tree);
 	mutex_init(&BTRFS_I(inode)->extent_mutex);
 	mutex_init(&BTRFS_I(inode)->log_mutex);
@@ -3152,26 +3185,9 @@ static int btrfs_find_actor(struct inode *inode, void *opaque)
 		args->root == BTRFS_I(inode)->root;
 }
 
-struct inode *btrfs_ilookup(struct super_block *s, u64 objectid,
-			    struct btrfs_root *root, int wait)
-{
-	struct inode *inode;
-	struct btrfs_iget_args args;
-	args.ino = objectid;
-	args.root = root;
-
-	if (wait) {
-		inode = ilookup5(s, objectid, btrfs_find_actor,
-				 (void *)&args);
-	} else {
-		inode = ilookup5_nowait(s, objectid, btrfs_find_actor,
-					(void *)&args);
-	}
-	return inode;
-}
-
-struct inode *btrfs_iget_locked(struct super_block *s, u64 objectid,
-				struct btrfs_root *root)
+static struct inode *btrfs_iget_locked(struct super_block *s,
+				       u64 objectid,
+				       struct btrfs_root *root)
 {
 	struct inode *inode;
 	struct btrfs_iget_args args;
@@ -3188,24 +3204,21 @@ struct inode *btrfs_iget_locked(struct super_block *s, u64 objectid,
  * Returns in *is_new if the inode was read from disk
  */
 struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
-			 struct btrfs_root *root, int *is_new)
+			 struct btrfs_root *root)
 {
 	struct inode *inode;
 
 	inode = btrfs_iget_locked(s, location->objectid, root);
 	if (!inode)
-		return ERR_PTR(-EACCES);
+		return ERR_PTR(-ENOMEM);
 
 	if (inode->i_state & I_NEW) {
 		BTRFS_I(inode)->root = root;
 		memcpy(&BTRFS_I(inode)->location, location, sizeof(*location));
 		btrfs_read_locked_inode(inode);
+
+		inode_tree_add(inode);
 		unlock_new_inode(inode);
-		if (is_new)
-			*is_new = 1;
-	} else {
-		if (is_new)
-			*is_new = 0;
 	}
 
 	return inode;
@@ -3218,7 +3231,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 	struct btrfs_root *root = bi->root;
 	struct btrfs_root *sub_root = root;
 	struct btrfs_key location;
-	int ret, new;
+	int ret;
 
 	if (dentry->d_name.len > BTRFS_NAME_LEN)
 		return ERR_PTR(-ENAMETOOLONG);
@@ -3236,7 +3249,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 			return ERR_PTR(ret);
 		if (ret > 0)
 			return ERR_PTR(-ENOENT);
-		inode = btrfs_iget(dir->i_sb, &location, sub_root, &new);
+		inode = btrfs_iget(dir->i_sb, &location, sub_root);
 		if (IS_ERR(inode))
 			return ERR_CAST(inode);
 	}
@@ -3574,9 +3587,9 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 			btrfs_find_block_group(root, 0, alloc_hint, owner);
 	if ((mode & S_IFREG)) {
 		if (btrfs_test_opt(root, NODATASUM))
-			btrfs_set_flag(inode, NODATASUM);
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
 		if (btrfs_test_opt(root, NODATACOW))
-			btrfs_set_flag(inode, NODATACOW);
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
 	}
 
 	key[0].objectid = objectid;
@@ -3630,7 +3643,10 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 	location->offset = 0;
 	btrfs_set_key_type(location, BTRFS_INODE_ITEM_KEY);
 
+	btrfs_inherit_iflags(inode, dir);
+
 	insert_inode_hash(inode);
+	inode_tree_add(inode);
 	return inode;
 fail:
 	if (dir)
@@ -3750,7 +3766,6 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 		init_special_inode(inode, inode->i_mode, rdev);
 		btrfs_update_inode(trans, root, inode);
 	}
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 out_unlock:
@@ -3815,7 +3830,6 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 		inode->i_op = &btrfs_file_inode_operations;
 		BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
 	}
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 out_unlock:
@@ -3862,7 +3876,6 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	if (err)
 		drop_inode = 1;
 
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, dir);
 	err = btrfs_update_inode(trans, root, inode);
 
@@ -3944,7 +3957,6 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 
 	d_instantiate(dentry, inode);
 	drop_on_err = 0;
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 
@@ -4683,6 +4695,7 @@ void btrfs_destroy_inode(struct inode *inode)
 			btrfs_put_ordered_extent(ordered);
 		}
 	}
+	inode_tree_del(inode);
 	btrfs_drop_extent_cache(inode, 0, (u64)-1, 0);
 	kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
 }
@@ -4972,7 +4985,6 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 		inode->i_op = &btrfs_file_inode_operations;
 		BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
 	}
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 	if (drop_inode)
@@ -5061,7 +5073,7 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans,
 out:
 	if (cur_offset > start) {
 		inode->i_ctime = CURRENT_TIME;
-		btrfs_set_flag(inode, PREALLOC);
+		BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
 		if (!(mode & FALLOC_FL_KEEP_SIZE) &&
 		    cur_offset > i_size_read(inode))
 			btrfs_i_size_write(inode, cur_offset);
@@ -5182,7 +5194,7 @@ static int btrfs_set_page_dirty(struct page *page)
 
 static int btrfs_permission(struct inode *inode, int mask)
 {
-	if (btrfs_test_flag(inode, READONLY) && (mask & MAY_WRITE))
+	if ((BTRFS_I(inode)->flags & BTRFS_INODE_READONLY) && (mask & MAY_WRITE))
 		return -EACCES;
 	return generic_permission(inode, mask, btrfs_check_acl);
 }
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 2624b53ea78..eff18f5b536 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -50,7 +50,177 @@
 #include "volumes.h"
 #include "locking.h"
 
+/* Mask out flags that are inappropriate for the given type of inode. */
+static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
+{
+	if (S_ISDIR(mode))
+		return flags;
+	else if (S_ISREG(mode))
+		return flags & ~FS_DIRSYNC_FL;
+	else
+		return flags & (FS_NODUMP_FL | FS_NOATIME_FL);
+}
+
+/*
+ * Export inode flags to the format expected by the FS_IOC_GETFLAGS ioctl.
+ */
+static unsigned int btrfs_flags_to_ioctl(unsigned int flags)
+{
+	unsigned int iflags = 0;
+
+	if (flags & BTRFS_INODE_SYNC)
+		iflags |= FS_SYNC_FL;
+	if (flags & BTRFS_INODE_IMMUTABLE)
+		iflags |= FS_IMMUTABLE_FL;
+	if (flags & BTRFS_INODE_APPEND)
+		iflags |= FS_APPEND_FL;
+	if (flags & BTRFS_INODE_NODUMP)
+		iflags |= FS_NODUMP_FL;
+	if (flags & BTRFS_INODE_NOATIME)
+		iflags |= FS_NOATIME_FL;
+	if (flags & BTRFS_INODE_DIRSYNC)
+		iflags |= FS_DIRSYNC_FL;
+
+	return iflags;
+}
+
+/*
+ * Update inode->i_flags based on the btrfs internal flags.
+ */
+void btrfs_update_iflags(struct inode *inode)
+{
+	struct btrfs_inode *ip = BTRFS_I(inode);
+
+	inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC);
+
+	if (ip->flags & BTRFS_INODE_SYNC)
+		inode->i_flags |= S_SYNC;
+	if (ip->flags & BTRFS_INODE_IMMUTABLE)
+		inode->i_flags |= S_IMMUTABLE;
+	if (ip->flags & BTRFS_INODE_APPEND)
+		inode->i_flags |= S_APPEND;
+	if (ip->flags & BTRFS_INODE_NOATIME)
+		inode->i_flags |= S_NOATIME;
+	if (ip->flags & BTRFS_INODE_DIRSYNC)
+		inode->i_flags |= S_DIRSYNC;
+}
+
+/*
+ * Inherit flags from the parent inode.
+ *
+ * Unlike extN we don't have any flags we don't want to inherit currently.
+ */
+void btrfs_inherit_iflags(struct inode *inode, struct inode *dir)
+{
+	unsigned int flags;
+
+	if (!dir)
+		return;
+
+	flags = BTRFS_I(dir)->flags;
+
+	if (S_ISREG(inode->i_mode))
+		flags &= ~BTRFS_INODE_DIRSYNC;
+	else if (!S_ISDIR(inode->i_mode))
+		flags &= (BTRFS_INODE_NODUMP | BTRFS_INODE_NOATIME);
+
+	BTRFS_I(inode)->flags = flags;
+	btrfs_update_iflags(inode);
+}
+
+static int btrfs_ioctl_getflags(struct file *file, void __user *arg)
+{
+	struct btrfs_inode *ip = BTRFS_I(file->f_path.dentry->d_inode);
+	unsigned int flags = btrfs_flags_to_ioctl(ip->flags);
+
+	if (copy_to_user(arg, &flags, sizeof(flags)))
+		return -EFAULT;
+	return 0;
+}
+
+static int btrfs_ioctl_setflags(struct file *file, void __user *arg)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	struct btrfs_inode *ip = BTRFS_I(inode);
+	struct btrfs_root *root = ip->root;
+	struct btrfs_trans_handle *trans;
+	unsigned int flags, oldflags;
+	int ret;
+
+	if (copy_from_user(&flags, arg, sizeof(flags)))
+		return -EFAULT;
+
+	if (flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | \
+		      FS_NOATIME_FL | FS_NODUMP_FL | \
+		      FS_SYNC_FL | FS_DIRSYNC_FL))
+		return -EOPNOTSUPP;
 
+	if (!is_owner_or_cap(inode))
+		return -EACCES;
+
+	mutex_lock(&inode->i_mutex);
+
+	flags = btrfs_mask_flags(inode->i_mode, flags);
+	oldflags = btrfs_flags_to_ioctl(ip->flags);
+	if ((flags ^ oldflags) & (FS_APPEND_FL | FS_IMMUTABLE_FL)) {
+		if (!capable(CAP_LINUX_IMMUTABLE)) {
+			ret = -EPERM;
+			goto out_unlock;
+		}
+	}
+
+	ret = mnt_want_write(file->f_path.mnt);
+	if (ret)
+		goto out_unlock;
+
+	if (flags & FS_SYNC_FL)
+		ip->flags |= BTRFS_INODE_SYNC;
+	else
+		ip->flags &= ~BTRFS_INODE_SYNC;
+	if (flags & FS_IMMUTABLE_FL)
+		ip->flags |= BTRFS_INODE_IMMUTABLE;
+	else
+		ip->flags &= ~BTRFS_INODE_IMMUTABLE;
+	if (flags & FS_APPEND_FL)
+		ip->flags |= BTRFS_INODE_APPEND;
+	else
+		ip->flags &= ~BTRFS_INODE_APPEND;
+	if (flags & FS_NODUMP_FL)
+		ip->flags |= BTRFS_INODE_NODUMP;
+	else
+		ip->flags &= ~BTRFS_INODE_NODUMP;
+	if (flags & FS_NOATIME_FL)
+		ip->flags |= BTRFS_INODE_NOATIME;
+	else
+		ip->flags &= ~BTRFS_INODE_NOATIME;
+	if (flags & FS_DIRSYNC_FL)
+		ip->flags |= BTRFS_INODE_DIRSYNC;
+	else
+		ip->flags &= ~BTRFS_INODE_DIRSYNC;
+
+
+	trans = btrfs_join_transaction(root, 1);
+	BUG_ON(!trans);
+
+	ret = btrfs_update_inode(trans, root, inode);
+	BUG_ON(ret);
+
+	btrfs_update_iflags(inode);
+	inode->i_ctime = CURRENT_TIME;
+	btrfs_end_transaction(trans, root);
+
+	mnt_drop_write(file->f_path.mnt);
+ out_unlock:
+	mutex_unlock(&inode->i_mutex);
+	return 0;
+}
+
+static int btrfs_ioctl_getversion(struct file *file, int __user *arg)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+
+	return put_user(inode->i_generation, arg);
+}
 
 static noinline int create_subvol(struct btrfs_root *root,
 				  struct dentry *dentry,
@@ -82,22 +252,25 @@ static noinline int create_subvol(struct btrfs_root *root,
 	if (ret)
 		goto fail;
 
-	leaf = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
-				      objectid, trans->transid, 0, 0, 0);
+	leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
+				      0, objectid, NULL, 0, 0, 0);
 	if (IS_ERR(leaf)) {
 		ret = PTR_ERR(leaf);
 		goto fail;
 	}
 
-	btrfs_set_header_nritems(leaf, 0);
-	btrfs_set_header_level(leaf, 0);
+	memset_extent_buffer(leaf, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_bytenr(leaf, leaf->start);
 	btrfs_set_header_generation(leaf, trans->transid);
+	btrfs_set_header_backref_rev(leaf, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(leaf, objectid);
 
 	write_extent_buffer(leaf, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(leaf),
 			    BTRFS_FSID_SIZE);
+	write_extent_buffer(leaf, root->fs_info->chunk_tree_uuid,
+			    (unsigned long)btrfs_header_chunk_tree_uuid(leaf),
+			    BTRFS_UUID_SIZE);
 	btrfs_mark_buffer_dirty(leaf);
 
 	inode_item = &root_item.inode;
@@ -125,7 +298,7 @@ static noinline int create_subvol(struct btrfs_root *root,
 	btrfs_set_root_dirid(&root_item, new_dirid);
 
 	key.objectid = objectid;
-	key.offset = 1;
+	key.offset = 0;
 	btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
 	ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
 				&root_item);
@@ -911,10 +1084,10 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 				if (disko) {
 					inode_add_bytes(inode, datal);
 					ret = btrfs_inc_extent_ref(trans, root,
-						   disko, diskl, leaf->start,
-						   root->root_key.objectid,
-						   trans->transid,
-						   inode->i_ino);
+							disko, diskl, 0,
+							root->root_key.objectid,
+							inode->i_ino,
+							new_key.offset - datao);
 					BUG_ON(ret);
 				}
 			} else if (type == BTRFS_FILE_EXTENT_INLINE) {
@@ -1074,6 +1247,12 @@ long btrfs_ioctl(struct file *file, unsigned int
 	void __user *argp = (void __user *)arg;
 
 	switch (cmd) {
+	case FS_IOC_GETFLAGS:
+		return btrfs_ioctl_getflags(file, argp);
+	case FS_IOC_SETFLAGS:
+		return btrfs_ioctl_setflags(file, argp);
+	case FS_IOC_GETVERSION:
+		return btrfs_ioctl_getversion(file, argp);
 	case BTRFS_IOC_SNAP_CREATE:
 		return btrfs_ioctl_snap_create(file, argp, 0);
 	case BTRFS_IOC_SUBVOL_CREATE:
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index 5f8f218c100..6d6523da0a3 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -45,22 +45,132 @@ static void print_dev_item(struct extent_buffer *eb,
 	       (unsigned long long)btrfs_device_total_bytes(eb, dev_item),
 	       (unsigned long long)btrfs_device_bytes_used(eb, dev_item));
 }
+static void print_extent_data_ref(struct extent_buffer *eb,
+				  struct btrfs_extent_data_ref *ref)
+{
+	printk(KERN_INFO "\t\textent data backref root %llu "
+	       "objectid %llu offset %llu count %u\n",
+	       (unsigned long long)btrfs_extent_data_ref_root(eb, ref),
+	       (unsigned long long)btrfs_extent_data_ref_objectid(eb, ref),
+	       (unsigned long long)btrfs_extent_data_ref_offset(eb, ref),
+	       btrfs_extent_data_ref_count(eb, ref));
+}
+
+static void print_extent_item(struct extent_buffer *eb, int slot)
+{
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *iref;
+	struct btrfs_extent_data_ref *dref;
+	struct btrfs_shared_data_ref *sref;
+	struct btrfs_disk_key key;
+	unsigned long end;
+	unsigned long ptr;
+	int type;
+	u32 item_size = btrfs_item_size_nr(eb, slot);
+	u64 flags;
+	u64 offset;
+
+	if (item_size < sizeof(*ei)) {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		struct btrfs_extent_item_v0 *ei0;
+		BUG_ON(item_size != sizeof(*ei0));
+		ei0 = btrfs_item_ptr(eb, slot, struct btrfs_extent_item_v0);
+		printk(KERN_INFO "\t\textent refs %u\n",
+		       btrfs_extent_refs_v0(eb, ei0));
+		return;
+#else
+		BUG();
+#endif
+	}
+
+	ei = btrfs_item_ptr(eb, slot, struct btrfs_extent_item);
+	flags = btrfs_extent_flags(eb, ei);
+
+	printk(KERN_INFO "\t\textent refs %llu gen %llu flags %llu\n",
+	       (unsigned long long)btrfs_extent_refs(eb, ei),
+	       (unsigned long long)btrfs_extent_generation(eb, ei),
+	       (unsigned long long)flags);
+
+	if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+		struct btrfs_tree_block_info *info;
+		info = (struct btrfs_tree_block_info *)(ei + 1);
+		btrfs_tree_block_key(eb, info, &key);
+		printk(KERN_INFO "\t\ttree block key (%llu %x %llu) "
+		       "level %d\n",
+		       (unsigned long long)btrfs_disk_key_objectid(&key),
+		       key.type,
+		       (unsigned long long)btrfs_disk_key_offset(&key),
+		       btrfs_tree_block_level(eb, info));
+		iref = (struct btrfs_extent_inline_ref *)(info + 1);
+	} else {
+		iref = (struct btrfs_extent_inline_ref *)(ei + 1);
+	}
+
+	ptr = (unsigned long)iref;
+	end = (unsigned long)ei + item_size;
+	while (ptr < end) {
+		iref = (struct btrfs_extent_inline_ref *)ptr;
+		type = btrfs_extent_inline_ref_type(eb, iref);
+		offset = btrfs_extent_inline_ref_offset(eb, iref);
+		switch (type) {
+		case BTRFS_TREE_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\ttree block backref "
+				"root %llu\n", (unsigned long long)offset);
+			break;
+		case BTRFS_SHARED_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\tshared block backref "
+				"parent %llu\n", (unsigned long long)offset);
+			break;
+		case BTRFS_EXTENT_DATA_REF_KEY:
+			dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+			print_extent_data_ref(eb, dref);
+			break;
+		case BTRFS_SHARED_DATA_REF_KEY:
+			sref = (struct btrfs_shared_data_ref *)(iref + 1);
+			printk(KERN_INFO "\t\tshared data backref "
+			       "parent %llu count %u\n",
+			       (unsigned long long)offset,
+			       btrfs_shared_data_ref_count(eb, sref));
+			break;
+		default:
+			BUG();
+		}
+		ptr += btrfs_extent_inline_ref_size(type);
+	}
+	WARN_ON(ptr > end);
+}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static void print_extent_ref_v0(struct extent_buffer *eb, int slot)
+{
+	struct btrfs_extent_ref_v0 *ref0;
+
+	ref0 = btrfs_item_ptr(eb, slot, struct btrfs_extent_ref_v0);
+	printk("\t\textent back ref root %llu gen %llu "
+		"owner %llu num_refs %lu\n",
+		(unsigned long long)btrfs_ref_root_v0(eb, ref0),
+		(unsigned long long)btrfs_ref_generation_v0(eb, ref0),
+		(unsigned long long)btrfs_ref_objectid_v0(eb, ref0),
+		(unsigned long)btrfs_ref_count_v0(eb, ref0));
+}
+#endif
+
 void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 {
 	int i;
+	u32 type;
 	u32 nr = btrfs_header_nritems(l);
 	struct btrfs_item *item;
-	struct btrfs_extent_item *ei;
 	struct btrfs_root_item *ri;
 	struct btrfs_dir_item *di;
 	struct btrfs_inode_item *ii;
 	struct btrfs_block_group_item *bi;
 	struct btrfs_file_extent_item *fi;
+	struct btrfs_extent_data_ref *dref;
+	struct btrfs_shared_data_ref *sref;
+	struct btrfs_dev_extent *dev_extent;
 	struct btrfs_key key;
 	struct btrfs_key found_key;
-	struct btrfs_extent_ref *ref;
-	struct btrfs_dev_extent *dev_extent;
-	u32 type;
 
 	printk(KERN_INFO "leaf %llu total ptrs %d free space %d\n",
 		(unsigned long long)btrfs_header_bytenr(l), nr,
@@ -100,20 +210,25 @@ void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 				btrfs_disk_root_refs(l, ri));
 			break;
 		case BTRFS_EXTENT_ITEM_KEY:
-			ei = btrfs_item_ptr(l, i, struct btrfs_extent_item);
-			printk(KERN_INFO "\t\textent data refs %u\n",
-				btrfs_extent_refs(l, ei));
-			break;
-		case BTRFS_EXTENT_REF_KEY:
-			ref = btrfs_item_ptr(l, i, struct btrfs_extent_ref);
-			printk(KERN_INFO "\t\textent back ref root %llu "
-			       "gen %llu owner %llu num_refs %lu\n",
-			       (unsigned long long)btrfs_ref_root(l, ref),
-			       (unsigned long long)btrfs_ref_generation(l, ref),
-			       (unsigned long long)btrfs_ref_objectid(l, ref),
-			       (unsigned long)btrfs_ref_num_refs(l, ref));
+			print_extent_item(l, i);
+			break;
+		case BTRFS_TREE_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\ttree block backref\n");
+			break;
+		case BTRFS_SHARED_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\tshared block backref\n");
+			break;
+		case BTRFS_EXTENT_DATA_REF_KEY:
+			dref = btrfs_item_ptr(l, i,
+					      struct btrfs_extent_data_ref);
+			print_extent_data_ref(l, dref);
+			break;
+		case BTRFS_SHARED_DATA_REF_KEY:
+			sref = btrfs_item_ptr(l, i,
+					      struct btrfs_shared_data_ref);
+			printk(KERN_INFO "\t\tshared data backref count %u\n",
+			       btrfs_shared_data_ref_count(l, sref));
 			break;
-
 		case BTRFS_EXTENT_DATA_KEY:
 			fi = btrfs_item_ptr(l, i,
 					    struct btrfs_file_extent_item);
@@ -139,6 +254,12 @@ void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 			       (unsigned long long)
 			       btrfs_file_extent_ram_bytes(l, fi));
 			break;
+		case BTRFS_EXTENT_REF_V0_KEY:
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+			print_extent_ref_v0(l, i);
+#else
+			BUG();
+#endif
 		case BTRFS_BLOCK_GROUP_ITEM_KEY:
 			bi = btrfs_item_ptr(l, i,
 					    struct btrfs_block_group_item);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
new file mode 100644
index 00000000000..b23dc209ae1
--- /dev/null
+++ b/fs/btrfs/relocation.c
@@ -0,0 +1,3711 @@
+/*
+ * Copyright (C) 2009 Oracle.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/writeback.h>
+#include <linux/blkdev.h>
+#include <linux/rbtree.h>
+#include "ctree.h"
+#include "disk-io.h"
+#include "transaction.h"
+#include "volumes.h"
+#include "locking.h"
+#include "btrfs_inode.h"
+#include "async-thread.h"
+
+/*
+ * backref_node, mapping_node and tree_block start with this
+ */
+struct tree_entry {
+	struct rb_node rb_node;
+	u64 bytenr;
+};
+
+/*
+ * present a tree block in the backref cache
+ */
+struct backref_node {
+	struct rb_node rb_node;
+	u64 bytenr;
+	/* objectid tree block owner */
+	u64 owner;
+	/* list of upper level blocks reference this block */
+	struct list_head upper;
+	/* list of child blocks in the cache */
+	struct list_head lower;
+	/* NULL if this node is not tree root */
+	struct btrfs_root *root;
+	/* extent buffer got by COW the block */
+	struct extent_buffer *eb;
+	/* level of tree block */
+	unsigned int level:8;
+	/* 1 if the block is root of old snapshot */
+	unsigned int old_root:1;
+	/* 1 if no child blocks in the cache */
+	unsigned int lowest:1;
+	/* is the extent buffer locked */
+	unsigned int locked:1;
+	/* has the block been processed */
+	unsigned int processed:1;
+	/* have backrefs of this block been checked */
+	unsigned int checked:1;
+};
+
+/*
+ * present a block pointer in the backref cache
+ */
+struct backref_edge {
+	struct list_head list[2];
+	struct backref_node *node[2];
+	u64 blockptr;
+};
+
+#define LOWER	0
+#define UPPER	1
+
+struct backref_cache {
+	/* red black tree of all backref nodes in the cache */
+	struct rb_root rb_root;
+	/* list of backref nodes with no child block in the cache */
+	struct list_head pending[BTRFS_MAX_LEVEL];
+	spinlock_t lock;
+};
+
+/*
+ * map address of tree root to tree
+ */
+struct mapping_node {
+	struct rb_node rb_node;
+	u64 bytenr;
+	void *data;
+};
+
+struct mapping_tree {
+	struct rb_root rb_root;
+	spinlock_t lock;
+};
+
+/*
+ * present a tree block to process
+ */
+struct tree_block {
+	struct rb_node rb_node;
+	u64 bytenr;
+	struct btrfs_key key;
+	unsigned int level:8;
+	unsigned int key_ready:1;
+};
+
+/* inode vector */
+#define INODEVEC_SIZE 16
+
+struct inodevec {
+	struct list_head list;
+	struct inode *inode[INODEVEC_SIZE];
+	int nr;
+};
+
+struct reloc_control {
+	/* block group to relocate */
+	struct btrfs_block_group_cache *block_group;
+	/* extent tree */
+	struct btrfs_root *extent_root;
+	/* inode for moving data */
+	struct inode *data_inode;
+	struct btrfs_workers workers;
+	/* tree blocks have been processed */
+	struct extent_io_tree processed_blocks;
+	/* map start of tree root to corresponding reloc tree */
+	struct mapping_tree reloc_root_tree;
+	/* list of reloc trees */
+	struct list_head reloc_roots;
+	u64 search_start;
+	u64 extents_found;
+	u64 extents_skipped;
+	int stage;
+	int create_reloc_root;
+	unsigned int found_file_extent:1;
+	unsigned int found_old_snapshot:1;
+};
+
+/* stages of data relocation */
+#define MOVE_DATA_EXTENTS	0
+#define UPDATE_DATA_PTRS	1
+
+/*
+ * merge reloc tree to corresponding fs tree in worker threads
+ */
+struct async_merge {
+	struct btrfs_work work;
+	struct reloc_control *rc;
+	struct btrfs_root *root;
+	struct completion *done;
+	atomic_t *num_pending;
+};
+
+static void mapping_tree_init(struct mapping_tree *tree)
+{
+	tree->rb_root.rb_node = NULL;
+	spin_lock_init(&tree->lock);
+}
+
+static void backref_cache_init(struct backref_cache *cache)
+{
+	int i;
+	cache->rb_root.rb_node = NULL;
+	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
+		INIT_LIST_HEAD(&cache->pending[i]);
+	spin_lock_init(&cache->lock);
+}
+
+static void backref_node_init(struct backref_node *node)
+{
+	memset(node, 0, sizeof(*node));
+	INIT_LIST_HEAD(&node->upper);
+	INIT_LIST_HEAD(&node->lower);
+	RB_CLEAR_NODE(&node->rb_node);
+}
+
+static struct rb_node *tree_insert(struct rb_root *root, u64 bytenr,
+				   struct rb_node *node)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct tree_entry *entry;
+
+	while (*p) {
+		parent = *p;
+		entry = rb_entry(parent, struct tree_entry, rb_node);
+
+		if (bytenr < entry->bytenr)
+			p = &(*p)->rb_left;
+		else if (bytenr > entry->bytenr)
+			p = &(*p)->rb_right;
+		else
+			return parent;
+	}
+
+	rb_link_node(node, parent, p);
+	rb_insert_color(node, root);
+	return NULL;
+}
+
+static struct rb_node *tree_search(struct rb_root *root, u64 bytenr)
+{
+	struct rb_node *n = root->rb_node;
+	struct tree_entry *entry;
+
+	while (n) {
+		entry = rb_entry(n, struct tree_entry, rb_node);
+
+		if (bytenr < entry->bytenr)
+			n = n->rb_left;
+		else if (bytenr > entry->bytenr)
+			n = n->rb_right;
+		else
+			return n;
+	}
+	return NULL;
+}
+
+/*
+ * walk up backref nodes until reach node presents tree root
+ */
+static struct backref_node *walk_up_backref(struct backref_node *node,
+					    struct backref_edge *edges[],
+					    int *index)
+{
+	struct backref_edge *edge;
+	int idx = *index;
+
+	while (!list_empty(&node->upper)) {
+		edge = list_entry(node->upper.next,
+				  struct backref_edge, list[LOWER]);
+		edges[idx++] = edge;
+		node = edge->node[UPPER];
+	}
+	*index = idx;
+	return node;
+}
+
+/*
+ * walk down backref nodes to find start of next reference path
+ */
+static struct backref_node *walk_down_backref(struct backref_edge *edges[],
+					      int *index)
+{
+	struct backref_edge *edge;
+	struct backref_node *lower;
+	int idx = *index;
+
+	while (idx > 0) {
+		edge = edges[idx - 1];
+		lower = edge->node[LOWER];
+		if (list_is_last(&edge->list[LOWER], &lower->upper)) {
+			idx--;
+			continue;
+		}
+		edge = list_entry(edge->list[LOWER].next,
+				  struct backref_edge, list[LOWER]);
+		edges[idx - 1] = edge;
+		*index = idx;
+		return edge->node[UPPER];
+	}
+	*index = 0;
+	return NULL;
+}
+
+static void drop_node_buffer(struct backref_node *node)
+{
+	if (node->eb) {
+		if (node->locked) {
+			btrfs_tree_unlock(node->eb);
+			node->locked = 0;
+		}
+		free_extent_buffer(node->eb);
+		node->eb = NULL;
+	}
+}
+
+static void drop_backref_node(struct backref_cache *tree,
+			      struct backref_node *node)
+{
+	BUG_ON(!node->lowest);
+	BUG_ON(!list_empty(&node->upper));
+
+	drop_node_buffer(node);
+	list_del(&node->lower);
+
+	rb_erase(&node->rb_node, &tree->rb_root);
+	kfree(node);
+}
+
+/*
+ * remove a backref node from the backref cache
+ */
+static void remove_backref_node(struct backref_cache *cache,
+				struct backref_node *node)
+{
+	struct backref_node *upper;
+	struct backref_edge *edge;
+
+	if (!node)
+		return;
+
+	BUG_ON(!node->lowest);
+	while (!list_empty(&node->upper)) {
+		edge = list_entry(node->upper.next, struct backref_edge,
+				  list[LOWER]);
+		upper = edge->node[UPPER];
+		list_del(&edge->list[LOWER]);
+		list_del(&edge->list[UPPER]);
+		kfree(edge);
+		/*
+		 * add the node to pending list if no other
+		 * child block cached.
+		 */
+		if (list_empty(&upper->lower)) {
+			list_add_tail(&upper->lower,
+				      &cache->pending[upper->level]);
+			upper->lowest = 1;
+		}
+	}
+	drop_backref_node(cache, node);
+}
+
+/*
+ * find reloc tree by address of tree root
+ */
+static struct btrfs_root *find_reloc_root(struct reloc_control *rc,
+					  u64 bytenr)
+{
+	struct rb_node *rb_node;
+	struct mapping_node *node;
+	struct btrfs_root *root = NULL;
+
+	spin_lock(&rc->reloc_root_tree.lock);
+	rb_node = tree_search(&rc->reloc_root_tree.rb_root, bytenr);
+	if (rb_node) {
+		node = rb_entry(rb_node, struct mapping_node, rb_node);
+		root = (struct btrfs_root *)node->data;
+	}
+	spin_unlock(&rc->reloc_root_tree.lock);
+	return root;
+}
+
+static int is_cowonly_root(u64 root_objectid)
+{
+	if (root_objectid == BTRFS_ROOT_TREE_OBJECTID ||
+	    root_objectid == BTRFS_EXTENT_TREE_OBJECTID ||
+	    root_objectid == BTRFS_CHUNK_TREE_OBJECTID ||
+	    root_objectid == BTRFS_DEV_TREE_OBJECTID ||
+	    root_objectid == BTRFS_TREE_LOG_OBJECTID ||
+	    root_objectid == BTRFS_CSUM_TREE_OBJECTID)
+		return 1;
+	return 0;
+}
+
+static struct btrfs_root *read_fs_root(struct btrfs_fs_info *fs_info,
+					u64 root_objectid)
+{
+	struct btrfs_key key;
+
+	key.objectid = root_objectid;
+	key.type = BTRFS_ROOT_ITEM_KEY;
+	if (is_cowonly_root(root_objectid))
+		key.offset = 0;
+	else
+		key.offset = (u64)-1;
+
+	return btrfs_read_fs_root_no_name(fs_info, &key);
+}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static noinline_for_stack
+struct btrfs_root *find_tree_root(struct reloc_control *rc,
+				  struct extent_buffer *leaf,
+				  struct btrfs_extent_ref_v0 *ref0)
+{
+	struct btrfs_root *root;
+	u64 root_objectid = btrfs_ref_root_v0(leaf, ref0);
+	u64 generation = btrfs_ref_generation_v0(leaf, ref0);
+
+	BUG_ON(root_objectid == BTRFS_TREE_RELOC_OBJECTID);
+
+	root = read_fs_root(rc->extent_root->fs_info, root_objectid);
+	BUG_ON(IS_ERR(root));
+
+	if (root->ref_cows &&
+	    generation != btrfs_root_generation(&root->root_item))
+		return NULL;
+
+	return root;
+}
+#endif
+
+static noinline_for_stack
+int find_inline_backref(struct extent_buffer *leaf, int slot,
+			unsigned long *ptr, unsigned long *end)
+{
+	struct btrfs_extent_item *ei;
+	struct btrfs_tree_block_info *bi;
+	u32 item_size;
+
+	item_size = btrfs_item_size_nr(leaf, slot);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		WARN_ON(item_size != sizeof(struct btrfs_extent_item_v0));
+		return 1;
+	}
+#endif
+	ei = btrfs_item_ptr(leaf, slot, struct btrfs_extent_item);
+	WARN_ON(!(btrfs_extent_flags(leaf, ei) &
+		  BTRFS_EXTENT_FLAG_TREE_BLOCK));
+
+	if (item_size <= sizeof(*ei) + sizeof(*bi)) {
+		WARN_ON(item_size < sizeof(*ei) + sizeof(*bi));
+		return 1;
+	}
+
+	bi = (struct btrfs_tree_block_info *)(ei + 1);
+	*ptr = (unsigned long)(bi + 1);
+	*end = (unsigned long)ei + item_size;
+	return 0;
+}
+
+/*
+ * build backref tree for a given tree block. root of the backref tree
+ * corresponds the tree block, leaves of the backref tree correspond
+ * roots of b-trees that reference the tree block.
+ *
+ * the basic idea of this function is check backrefs of a given block
+ * to find upper level blocks that refernece the block, and then check
+ * bakcrefs of these upper level blocks recursively. the recursion stop
+ * when tree root is reached or backrefs for the block is cached.
+ *
+ * NOTE: if we find backrefs for a block are cached, we know backrefs
+ * for all upper level blocks that directly/indirectly reference the
+ * block are also cached.
+ */
+static struct backref_node *build_backref_tree(struct reloc_control *rc,
+					       struct backref_cache *cache,
+					       struct btrfs_key *node_key,
+					       int level, u64 bytenr)
+{
+	struct btrfs_path *path1;
+	struct btrfs_path *path2;
+	struct extent_buffer *eb;
+	struct btrfs_root *root;
+	struct backref_node *cur;
+	struct backref_node *upper;
+	struct backref_node *lower;
+	struct backref_node *node = NULL;
+	struct backref_node *exist = NULL;
+	struct backref_edge *edge;
+	struct rb_node *rb_node;
+	struct btrfs_key key;
+	unsigned long end;
+	unsigned long ptr;
+	LIST_HEAD(list);
+	int ret;
+	int err = 0;
+
+	path1 = btrfs_alloc_path();
+	path2 = btrfs_alloc_path();
+	if (!path1 || !path2) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	node = kmalloc(sizeof(*node), GFP_NOFS);
+	if (!node) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	backref_node_init(node);
+	node->bytenr = bytenr;
+	node->owner = 0;
+	node->level = level;
+	node->lowest = 1;
+	cur = node;
+again:
+	end = 0;
+	ptr = 0;
+	key.objectid = cur->bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = (u64)-1;
+
+	path1->search_commit_root = 1;
+	path1->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, rc->extent_root, &key, path1,
+				0, 0);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+	BUG_ON(!ret || !path1->slots[0]);
+
+	path1->slots[0]--;
+
+	WARN_ON(cur->checked);
+	if (!list_empty(&cur->upper)) {
+		/*
+		 * the backref was added previously when processsing
+		 * backref of type BTRFS_TREE_BLOCK_REF_KEY
+		 */
+		BUG_ON(!list_is_singular(&cur->upper));
+		edge = list_entry(cur->upper.next, struct backref_edge,
+				  list[LOWER]);
+		BUG_ON(!list_empty(&edge->list[UPPER]));
+		exist = edge->node[UPPER];
+		/*
+		 * add the upper level block to pending list if we need
+		 * check its backrefs
+		 */
+		if (!exist->checked)
+			list_add_tail(&edge->list[UPPER], &list);
+	} else {
+		exist = NULL;
+	}
+
+	while (1) {
+		cond_resched();
+		eb = path1->nodes[0];
+
+		if (ptr >= end) {
+			if (path1->slots[0] >= btrfs_header_nritems(eb)) {
+				ret = btrfs_next_leaf(rc->extent_root, path1);
+				if (ret < 0) {
+					err = ret;
+					goto out;
+				}
+				if (ret > 0)
+					break;
+				eb = path1->nodes[0];
+			}
+
+			btrfs_item_key_to_cpu(eb, &key, path1->slots[0]);
+			if (key.objectid != cur->bytenr) {
+				WARN_ON(exist);
+				break;
+			}
+
+			if (key.type == BTRFS_EXTENT_ITEM_KEY) {
+				ret = find_inline_backref(eb, path1->slots[0],
+							  &ptr, &end);
+				if (ret)
+					goto next;
+			}
+		}
+
+		if (ptr < end) {
+			/* update key for inline back ref */
+			struct btrfs_extent_inline_ref *iref;
+			iref = (struct btrfs_extent_inline_ref *)ptr;
+			key.type = btrfs_extent_inline_ref_type(eb, iref);
+			key.offset = btrfs_extent_inline_ref_offset(eb, iref);
+			WARN_ON(key.type != BTRFS_TREE_BLOCK_REF_KEY &&
+				key.type != BTRFS_SHARED_BLOCK_REF_KEY);
+		}
+
+		if (exist &&
+		    ((key.type == BTRFS_TREE_BLOCK_REF_KEY &&
+		      exist->owner == key.offset) ||
+		     (key.type == BTRFS_SHARED_BLOCK_REF_KEY &&
+		      exist->bytenr == key.offset))) {
+			exist = NULL;
+			goto next;
+		}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		if (key.type == BTRFS_SHARED_BLOCK_REF_KEY ||
+		    key.type == BTRFS_EXTENT_REF_V0_KEY) {
+			if (key.objectid == key.offset &&
+			    key.type == BTRFS_EXTENT_REF_V0_KEY) {
+				struct btrfs_extent_ref_v0 *ref0;
+				ref0 = btrfs_item_ptr(eb, path1->slots[0],
+						struct btrfs_extent_ref_v0);
+				root = find_tree_root(rc, eb, ref0);
+				if (root)
+					cur->root = root;
+				else
+					cur->old_root = 1;
+				break;
+			}
+#else
+		BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
+		if (key.type == BTRFS_SHARED_BLOCK_REF_KEY) {
+#endif
+			if (key.objectid == key.offset) {
+				/*
+				 * only root blocks of reloc trees use
+				 * backref of this type.
+				 */
+				root = find_reloc_root(rc, cur->bytenr);
+				BUG_ON(!root);
+				cur->root = root;
+				break;
+			}
+
+			edge = kzalloc(sizeof(*edge), GFP_NOFS);
+			if (!edge) {
+				err = -ENOMEM;
+				goto out;
+			}
+			rb_node = tree_search(&cache->rb_root, key.offset);
+			if (!rb_node) {
+				upper = kmalloc(sizeof(*upper), GFP_NOFS);
+				if (!upper) {
+					kfree(edge);
+					err = -ENOMEM;
+					goto out;
+				}
+				backref_node_init(upper);
+				upper->bytenr = key.offset;
+				upper->owner = 0;
+				upper->level = cur->level + 1;
+				/*
+				 *  backrefs for the upper level block isn't
+				 *  cached, add the block to pending list
+				 */
+				list_add_tail(&edge->list[UPPER], &list);
+			} else {
+				upper = rb_entry(rb_node, struct backref_node,
+						 rb_node);
+				INIT_LIST_HEAD(&edge->list[UPPER]);
+			}
+			list_add(&edge->list[LOWER], &cur->upper);
+			edge->node[UPPER] = upper;
+			edge->node[LOWER] = cur;
+
+			goto next;
+		} else if (key.type != BTRFS_TREE_BLOCK_REF_KEY) {
+			goto next;
+		}
+
+		/* key.type == BTRFS_TREE_BLOCK_REF_KEY */
+		root = read_fs_root(rc->extent_root->fs_info, key.offset);
+		if (IS_ERR(root)) {
+			err = PTR_ERR(root);
+			goto out;
+		}
+
+		if (btrfs_root_level(&root->root_item) == cur->level) {
+			/* tree root */
+			BUG_ON(btrfs_root_bytenr(&root->root_item) !=
+			       cur->bytenr);
+			cur->root = root;
+			break;
+		}
+
+		level = cur->level + 1;
+
+		/*
+		 * searching the tree to find upper level blocks
+		 * reference the block.
+		 */
+		path2->search_commit_root = 1;
+		path2->skip_locking = 1;
+		path2->lowest_level = level;
+		ret = btrfs_search_slot(NULL, root, node_key, path2, 0, 0);
+		path2->lowest_level = 0;
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+
+		eb = path2->nodes[level];
+		WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
+			cur->bytenr);
+
+		lower = cur;
+		for (; level < BTRFS_MAX_LEVEL; level++) {
+			if (!path2->nodes[level]) {
+				BUG_ON(btrfs_root_bytenr(&root->root_item) !=
+				       lower->bytenr);
+				lower->root = root;
+				break;
+			}
+
+			edge = kzalloc(sizeof(*edge), GFP_NOFS);
+			if (!edge) {
+				err = -ENOMEM;
+				goto out;
+			}
+
+			eb = path2->nodes[level];
+			rb_node = tree_search(&cache->rb_root, eb->start);
+			if (!rb_node) {
+				upper = kmalloc(sizeof(*upper), GFP_NOFS);
+				if (!upper) {
+					kfree(edge);
+					err = -ENOMEM;
+					goto out;
+				}
+				backref_node_init(upper);
+				upper->bytenr = eb->start;
+				upper->owner = btrfs_header_owner(eb);
+				upper->level = lower->level + 1;
+
+				/*
+				 * if we know the block isn't shared
+				 * we can void checking its backrefs.
+				 */
+				if (btrfs_block_can_be_shared(root, eb))
+					upper->checked = 0;
+				else
+					upper->checked = 1;
+
+				/*
+				 * add the block to pending list if we
+				 * need check its backrefs. only block
+				 * at 'cur->level + 1' is added to the
+				 * tail of pending list. this guarantees
+				 * we check backrefs from lower level
+				 * blocks to upper level blocks.
+				 */
+				if (!upper->checked &&
+				    level == cur->level + 1) {
+					list_add_tail(&edge->list[UPPER],
+						      &list);
+				} else
+					INIT_LIST_HEAD(&edge->list[UPPER]);
+			} else {
+				upper = rb_entry(rb_node, struct backref_node,
+						 rb_node);
+				BUG_ON(!upper->checked);
+				INIT_LIST_HEAD(&edge->list[UPPER]);
+			}
+			list_add_tail(&edge->list[LOWER], &lower->upper);
+			edge->node[UPPER] = upper;
+			edge->node[LOWER] = lower;
+
+			if (rb_node)
+				break;
+			lower = upper;
+			upper = NULL;
+		}
+		btrfs_release_path(root, path2);
+next:
+		if (ptr < end) {
+			ptr += btrfs_extent_inline_ref_size(key.type);
+			if (ptr >= end) {
+				WARN_ON(ptr > end);
+				ptr = 0;
+				end = 0;
+			}
+		}
+		if (ptr >= end)
+			path1->slots[0]++;
+	}
+	btrfs_release_path(rc->extent_root, path1);
+
+	cur->checked = 1;
+	WARN_ON(exist);
+
+	/* the pending list isn't empty, take the first block to process */
+	if (!list_empty(&list)) {
+		edge = list_entry(list.next, struct backref_edge, list[UPPER]);
+		list_del_init(&edge->list[UPPER]);
+		cur = edge->node[UPPER];
+		goto again;
+	}
+
+	/*
+	 * everything goes well, connect backref nodes and insert backref nodes
+	 * into the cache.
+	 */
+	BUG_ON(!node->checked);
+	rb_node = tree_insert(&cache->rb_root, node->bytenr, &node->rb_node);
+	BUG_ON(rb_node);
+
+	list_for_each_entry(edge, &node->upper, list[LOWER])
+		list_add_tail(&edge->list[UPPER], &list);
+
+	while (!list_empty(&list)) {
+		edge = list_entry(list.next, struct backref_edge, list[UPPER]);
+		list_del_init(&edge->list[UPPER]);
+		upper = edge->node[UPPER];
+
+		if (!RB_EMPTY_NODE(&upper->rb_node)) {
+			if (upper->lowest) {
+				list_del_init(&upper->lower);
+				upper->lowest = 0;
+			}
+
+			list_add_tail(&edge->list[UPPER], &upper->lower);
+			continue;
+		}
+
+		BUG_ON(!upper->checked);
+		rb_node = tree_insert(&cache->rb_root, upper->bytenr,
+				      &upper->rb_node);
+		BUG_ON(rb_node);
+
+		list_add_tail(&edge->list[UPPER], &upper->lower);
+
+		list_for_each_entry(edge, &upper->upper, list[LOWER])
+			list_add_tail(&edge->list[UPPER], &list);
+	}
+out:
+	btrfs_free_path(path1);
+	btrfs_free_path(path2);
+	if (err) {
+		INIT_LIST_HEAD(&list);
+		upper = node;
+		while (upper) {
+			if (RB_EMPTY_NODE(&upper->rb_node)) {
+				list_splice_tail(&upper->upper, &list);
+				kfree(upper);
+			}
+
+			if (list_empty(&list))
+				break;
+
+			edge = list_entry(list.next, struct backref_edge,
+					  list[LOWER]);
+			upper = edge->node[UPPER];
+			kfree(edge);
+		}
+		return ERR_PTR(err);
+	}
+	return node;
+}
+
+/*
+ * helper to add 'address of tree root -> reloc tree' mapping
+ */
+static int __add_reloc_root(struct btrfs_root *root)
+{
+	struct rb_node *rb_node;
+	struct mapping_node *node;
+	struct reloc_control *rc = root->fs_info->reloc_ctl;
+
+	node = kmalloc(sizeof(*node), GFP_NOFS);
+	BUG_ON(!node);
+
+	node->bytenr = root->node->start;
+	node->data = root;
+
+	spin_lock(&rc->reloc_root_tree.lock);
+	rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
+			      node->bytenr, &node->rb_node);
+	spin_unlock(&rc->reloc_root_tree.lock);
+	BUG_ON(rb_node);
+
+	list_add_tail(&root->root_list, &rc->reloc_roots);
+	return 0;
+}
+
+/*
+ * helper to update/delete the 'address of tree root -> reloc tree'
+ * mapping
+ */
+static int __update_reloc_root(struct btrfs_root *root, int del)
+{
+	struct rb_node *rb_node;
+	struct mapping_node *node = NULL;
+	struct reloc_control *rc = root->fs_info->reloc_ctl;
+
+	spin_lock(&rc->reloc_root_tree.lock);
+	rb_node = tree_search(&rc->reloc_root_tree.rb_root,
+			      root->commit_root->start);
+	if (rb_node) {
+		node = rb_entry(rb_node, struct mapping_node, rb_node);
+		rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
+	}
+	spin_unlock(&rc->reloc_root_tree.lock);
+
+	BUG_ON((struct btrfs_root *)node->data != root);
+
+	if (!del) {
+		spin_lock(&rc->reloc_root_tree.lock);
+		node->bytenr = root->node->start;
+		rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
+				      node->bytenr, &node->rb_node);
+		spin_unlock(&rc->reloc_root_tree.lock);
+		BUG_ON(rb_node);
+	} else {
+		list_del_init(&root->root_list);
+		kfree(node);
+	}
+	return 0;
+}
+
+/*
+ * create reloc tree for a given fs tree. reloc tree is just a
+ * snapshot of the fs tree with special root objectid.
+ */
+int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root)
+{
+	struct btrfs_root *reloc_root;
+	struct extent_buffer *eb;
+	struct btrfs_root_item *root_item;
+	struct btrfs_key root_key;
+	int ret;
+
+	if (root->reloc_root) {
+		reloc_root = root->reloc_root;
+		reloc_root->last_trans = trans->transid;
+		return 0;
+	}
+
+	if (!root->fs_info->reloc_ctl ||
+	    !root->fs_info->reloc_ctl->create_reloc_root ||
+	    root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		return 0;
+
+	root_item = kmalloc(sizeof(*root_item), GFP_NOFS);
+	BUG_ON(!root_item);
+
+	root_key.objectid = BTRFS_TREE_RELOC_OBJECTID;
+	root_key.type = BTRFS_ROOT_ITEM_KEY;
+	root_key.offset = root->root_key.objectid;
+
+	ret = btrfs_copy_root(trans, root, root->commit_root, &eb,
+			      BTRFS_TREE_RELOC_OBJECTID);
+	BUG_ON(ret);
+
+	btrfs_set_root_last_snapshot(&root->root_item, trans->transid - 1);
+	memcpy(root_item, &root->root_item, sizeof(*root_item));
+	btrfs_set_root_refs(root_item, 1);
+	btrfs_set_root_bytenr(root_item, eb->start);
+	btrfs_set_root_level(root_item, btrfs_header_level(eb));
+	btrfs_set_root_generation(root_item, trans->transid);
+	memset(&root_item->drop_progress, 0, sizeof(struct btrfs_disk_key));
+	root_item->drop_level = 0;
+
+	btrfs_tree_unlock(eb);
+	free_extent_buffer(eb);
+
+	ret = btrfs_insert_root(trans, root->fs_info->tree_root,
+				&root_key, root_item);
+	BUG_ON(ret);
+	kfree(root_item);
+
+	reloc_root = btrfs_read_fs_root_no_radix(root->fs_info->tree_root,
+						 &root_key);
+	BUG_ON(IS_ERR(reloc_root));
+	reloc_root->last_trans = trans->transid;
+
+	__add_reloc_root(reloc_root);
+	root->reloc_root = reloc_root;
+	return 0;
+}
+
+/*
+ * update root item of reloc tree
+ */
+int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
+			    struct btrfs_root *root)
+{
+	struct btrfs_root *reloc_root;
+	struct btrfs_root_item *root_item;
+	int del = 0;
+	int ret;
+
+	if (!root->reloc_root)
+		return 0;
+
+	reloc_root = root->reloc_root;
+	root_item = &reloc_root->root_item;
+
+	if (btrfs_root_refs(root_item) == 0) {
+		root->reloc_root = NULL;
+		del = 1;
+	}
+
+	__update_reloc_root(reloc_root, del);
+
+	if (reloc_root->commit_root != reloc_root->node) {
+		btrfs_set_root_node(root_item, reloc_root->node);
+		free_extent_buffer(reloc_root->commit_root);
+		reloc_root->commit_root = btrfs_root_node(reloc_root);
+	}
+
+	ret = btrfs_update_root(trans, root->fs_info->tree_root,
+				&reloc_root->root_key, root_item);
+	BUG_ON(ret);
+	return 0;
+}
+
+/*
+ * helper to find first cached inode with inode number >= objectid
+ * in a subvolume
+ */
+static struct inode *find_next_inode(struct btrfs_root *root, u64 objectid)
+{
+	struct rb_node *node;
+	struct rb_node *prev;
+	struct btrfs_inode *entry;
+	struct inode *inode;
+
+	spin_lock(&root->inode_lock);
+again:
+	node = root->inode_tree.rb_node;
+	prev = NULL;
+	while (node) {
+		prev = node;
+		entry = rb_entry(node, struct btrfs_inode, rb_node);
+
+		if (objectid < entry->vfs_inode.i_ino)
+			node = node->rb_left;
+		else if (objectid > entry->vfs_inode.i_ino)
+			node = node->rb_right;
+		else
+			break;
+	}
+	if (!node) {
+		while (prev) {
+			entry = rb_entry(prev, struct btrfs_inode, rb_node);
+			if (objectid <= entry->vfs_inode.i_ino) {
+				node = prev;
+				break;
+			}
+			prev = rb_next(prev);
+		}
+	}
+	while (node) {
+		entry = rb_entry(node, struct btrfs_inode, rb_node);
+		inode = igrab(&entry->vfs_inode);
+		if (inode) {
+			spin_unlock(&root->inode_lock);
+			return inode;
+		}
+
+		objectid = entry->vfs_inode.i_ino + 1;
+		if (cond_resched_lock(&root->inode_lock))
+			goto again;
+
+		node = rb_next(node);
+	}
+	spin_unlock(&root->inode_lock);
+	return NULL;
+}
+
+static int in_block_group(u64 bytenr,
+			  struct btrfs_block_group_cache *block_group)
+{
+	if (bytenr >= block_group->key.objectid &&
+	    bytenr < block_group->key.objectid + block_group->key.offset)
+		return 1;
+	return 0;
+}
+
+/*
+ * get new location of data
+ */
+static int get_new_location(struct inode *reloc_inode, u64 *new_bytenr,
+			    u64 bytenr, u64 num_bytes)
+{
+	struct btrfs_root *root = BTRFS_I(reloc_inode)->root;
+	struct btrfs_path *path;
+	struct btrfs_file_extent_item *fi;
+	struct extent_buffer *leaf;
+	int ret;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	bytenr -= BTRFS_I(reloc_inode)->index_cnt;
+	ret = btrfs_lookup_file_extent(NULL, root, path, reloc_inode->i_ino,
+				       bytenr, 0);
+	if (ret < 0)
+		goto out;
+	if (ret > 0) {
+		ret = -ENOENT;
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	fi = btrfs_item_ptr(leaf, path->slots[0],
+			    struct btrfs_file_extent_item);
+
+	BUG_ON(btrfs_file_extent_offset(leaf, fi) ||
+	       btrfs_file_extent_compression(leaf, fi) ||
+	       btrfs_file_extent_encryption(leaf, fi) ||
+	       btrfs_file_extent_other_encoding(leaf, fi));
+
+	if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
+		ret = 1;
+		goto out;
+	}
+
+	if (new_bytenr)
+		*new_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+	ret = 0;
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * update file extent items in the tree leaf to point to
+ * the new locations.
+ */
+static int replace_file_extents(struct btrfs_trans_handle *trans,
+				struct reloc_control *rc,
+				struct btrfs_root *root,
+				struct extent_buffer *leaf,
+				struct list_head *inode_list)
+{
+	struct btrfs_key key;
+	struct btrfs_file_extent_item *fi;
+	struct inode *inode = NULL;
+	struct inodevec *ivec = NULL;
+	u64 parent;
+	u64 bytenr;
+	u64 new_bytenr;
+	u64 num_bytes;
+	u64 end;
+	u32 nritems;
+	u32 i;
+	int ret;
+	int first = 1;
+	int dirty = 0;
+
+	if (rc->stage != UPDATE_DATA_PTRS)
+		return 0;
+
+	/* reloc trees always use full backref */
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		parent = leaf->start;
+	else
+		parent = 0;
+
+	nritems = btrfs_header_nritems(leaf);
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		btrfs_item_key_to_cpu(leaf, &key, i);
+		if (key.type != BTRFS_EXTENT_DATA_KEY)
+			continue;
+		fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
+		if (btrfs_file_extent_type(leaf, fi) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			continue;
+		bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+		num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
+		if (bytenr == 0)
+			continue;
+		if (!in_block_group(bytenr, rc->block_group))
+			continue;
+
+		/*
+		 * if we are modifying block in fs tree, wait for readpage
+		 * to complete and drop the extent cache
+		 */
+		if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID) {
+			if (!ivec || ivec->nr == INODEVEC_SIZE) {
+				ivec = kmalloc(sizeof(*ivec), GFP_NOFS);
+				BUG_ON(!ivec);
+				ivec->nr = 0;
+				list_add_tail(&ivec->list, inode_list);
+			}
+			if (first) {
+				inode = find_next_inode(root, key.objectid);
+				if (inode)
+					ivec->inode[ivec->nr++] = inode;
+				first = 0;
+			} else if (inode && inode->i_ino < key.objectid) {
+				inode = find_next_inode(root, key.objectid);
+				if (inode)
+					ivec->inode[ivec->nr++] = inode;
+			}
+			if (inode && inode->i_ino == key.objectid) {
+				end = key.offset +
+				      btrfs_file_extent_num_bytes(leaf, fi);
+				WARN_ON(!IS_ALIGNED(key.offset,
+						    root->sectorsize));
+				WARN_ON(!IS_ALIGNED(end, root->sectorsize));
+				end--;
+				ret = try_lock_extent(&BTRFS_I(inode)->io_tree,
+						      key.offset, end,
+						      GFP_NOFS);
+				if (!ret)
+					continue;
+
+				btrfs_drop_extent_cache(inode, key.offset, end,
+							1);
+				unlock_extent(&BTRFS_I(inode)->io_tree,
+					      key.offset, end, GFP_NOFS);
+			}
+		}
+
+		ret = get_new_location(rc->data_inode, &new_bytenr,
+				       bytenr, num_bytes);
+		if (ret > 0)
+			continue;
+		BUG_ON(ret < 0);
+
+		btrfs_set_file_extent_disk_bytenr(leaf, fi, new_bytenr);
+		dirty = 1;
+
+		key.offset -= btrfs_file_extent_offset(leaf, fi);
+		ret = btrfs_inc_extent_ref(trans, root, new_bytenr,
+					   num_bytes, parent,
+					   btrfs_header_owner(leaf),
+					   key.objectid, key.offset);
+		BUG_ON(ret);
+
+		ret = btrfs_free_extent(trans, root, bytenr, num_bytes,
+					parent, btrfs_header_owner(leaf),
+					key.objectid, key.offset);
+		BUG_ON(ret);
+	}
+	if (dirty)
+		btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+
+static noinline_for_stack
+int memcmp_node_keys(struct extent_buffer *eb, int slot,
+		     struct btrfs_path *path, int level)
+{
+	struct btrfs_disk_key key1;
+	struct btrfs_disk_key key2;
+	btrfs_node_key(eb, &key1, slot);
+	btrfs_node_key(path->nodes[level], &key2, path->slots[level]);
+	return memcmp(&key1, &key2, sizeof(key1));
+}
+
+/*
+ * try to replace tree blocks in fs tree with the new blocks
+ * in reloc tree. tree blocks haven't been modified since the
+ * reloc tree was create can be replaced.
+ *
+ * if a block was replaced, level of the block + 1 is returned.
+ * if no block got replaced, 0 is returned. if there are other
+ * errors, a negative error number is returned.
+ */
+static int replace_path(struct btrfs_trans_handle *trans,
+			struct btrfs_root *dest, struct btrfs_root *src,
+			struct btrfs_path *path, struct btrfs_key *next_key,
+			struct extent_buffer **leaf,
+			int lowest_level, int max_level)
+{
+	struct extent_buffer *eb;
+	struct extent_buffer *parent;
+	struct btrfs_key key;
+	u64 old_bytenr;
+	u64 new_bytenr;
+	u64 old_ptr_gen;
+	u64 new_ptr_gen;
+	u64 last_snapshot;
+	u32 blocksize;
+	int level;
+	int ret;
+	int slot;
+
+	BUG_ON(src->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
+	BUG_ON(dest->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
+	BUG_ON(lowest_level > 1 && leaf);
+
+	last_snapshot = btrfs_root_last_snapshot(&src->root_item);
+
+	slot = path->slots[lowest_level];
+	btrfs_node_key_to_cpu(path->nodes[lowest_level], &key, slot);
+
+	eb = btrfs_lock_root_node(dest);
+	btrfs_set_lock_blocking(eb);
+	level = btrfs_header_level(eb);
+
+	if (level < lowest_level) {
+		btrfs_tree_unlock(eb);
+		free_extent_buffer(eb);
+		return 0;
+	}
+
+	ret = btrfs_cow_block(trans, dest, eb, NULL, 0, &eb);
+	BUG_ON(ret);
+	btrfs_set_lock_blocking(eb);
+
+	if (next_key) {
+		next_key->objectid = (u64)-1;
+		next_key->type = (u8)-1;
+		next_key->offset = (u64)-1;
+	}
+
+	parent = eb;
+	while (1) {
+		level = btrfs_header_level(parent);
+		BUG_ON(level < lowest_level);
+
+		ret = btrfs_bin_search(parent, &key, level, &slot);
+		if (ret && slot > 0)
+			slot--;
+
+		if (next_key && slot + 1 < btrfs_header_nritems(parent))
+			btrfs_node_key_to_cpu(parent, next_key, slot + 1);
+
+		old_bytenr = btrfs_node_blockptr(parent, slot);
+		blocksize = btrfs_level_size(dest, level - 1);
+		old_ptr_gen = btrfs_node_ptr_generation(parent, slot);
+
+		if (level <= max_level) {
+			eb = path->nodes[level];
+			new_bytenr = btrfs_node_blockptr(eb,
+							path->slots[level]);
+			new_ptr_gen = btrfs_node_ptr_generation(eb,
+							path->slots[level]);
+		} else {
+			new_bytenr = 0;
+			new_ptr_gen = 0;
+		}
+
+		if (new_bytenr > 0 && new_bytenr == old_bytenr) {
+			WARN_ON(1);
+			ret = level;
+			break;
+		}
+
+		if (new_bytenr == 0 || old_ptr_gen > last_snapshot ||
+		    memcmp_node_keys(parent, slot, path, level)) {
+			if (level <= lowest_level && !leaf) {
+				ret = 0;
+				break;
+			}
+
+			eb = read_tree_block(dest, old_bytenr, blocksize,
+					     old_ptr_gen);
+			btrfs_tree_lock(eb);
+			ret = btrfs_cow_block(trans, dest, eb, parent,
+					      slot, &eb);
+			BUG_ON(ret);
+			btrfs_set_lock_blocking(eb);
+
+			if (level <= lowest_level) {
+				*leaf = eb;
+				ret = 0;
+				break;
+			}
+
+			btrfs_tree_unlock(parent);
+			free_extent_buffer(parent);
+
+			parent = eb;
+			continue;
+		}
+
+		btrfs_node_key_to_cpu(path->nodes[level], &key,
+				      path->slots[level]);
+		btrfs_release_path(src, path);
+
+		path->lowest_level = level;
+		ret = btrfs_search_slot(trans, src, &key, path, 0, 1);
+		path->lowest_level = 0;
+		BUG_ON(ret);
+
+		/*
+		 * swap blocks in fs tree and reloc tree.
+		 */
+		btrfs_set_node_blockptr(parent, slot, new_bytenr);
+		btrfs_set_node_ptr_generation(parent, slot, new_ptr_gen);
+		btrfs_mark_buffer_dirty(parent);
+
+		btrfs_set_node_blockptr(path->nodes[level],
+					path->slots[level], old_bytenr);
+		btrfs_set_node_ptr_generation(path->nodes[level],
+					      path->slots[level], old_ptr_gen);
+		btrfs_mark_buffer_dirty(path->nodes[level]);
+
+		ret = btrfs_inc_extent_ref(trans, src, old_bytenr, blocksize,
+					path->nodes[level]->start,
+					src->root_key.objectid, level - 1, 0);
+		BUG_ON(ret);
+		ret = btrfs_inc_extent_ref(trans, dest, new_bytenr, blocksize,
+					0, dest->root_key.objectid, level - 1,
+					0);
+		BUG_ON(ret);
+
+		ret = btrfs_free_extent(trans, src, new_bytenr, blocksize,
+					path->nodes[level]->start,
+					src->root_key.objectid, level - 1, 0);
+		BUG_ON(ret);
+
+		ret = btrfs_free_extent(trans, dest, old_bytenr, blocksize,
+					0, dest->root_key.objectid, level - 1,
+					0);
+		BUG_ON(ret);
+
+		btrfs_unlock_up_safe(path, 0);
+
+		ret = level;
+		break;
+	}
+	btrfs_tree_unlock(parent);
+	free_extent_buffer(parent);
+	return ret;
+}
+
+/*
+ * helper to find next relocated block in reloc tree
+ */
+static noinline_for_stack
+int walk_up_reloc_tree(struct btrfs_root *root, struct btrfs_path *path,
+		       int *level)
+{
+	struct extent_buffer *eb;
+	int i;
+	u64 last_snapshot;
+	u32 nritems;
+
+	last_snapshot = btrfs_root_last_snapshot(&root->root_item);
+
+	for (i = 0; i < *level; i++) {
+		free_extent_buffer(path->nodes[i]);
+		path->nodes[i] = NULL;
+	}
+
+	for (i = *level; i < BTRFS_MAX_LEVEL && path->nodes[i]; i++) {
+		eb = path->nodes[i];
+		nritems = btrfs_header_nritems(eb);
+		while (path->slots[i] + 1 < nritems) {
+			path->slots[i]++;
+			if (btrfs_node_ptr_generation(eb, path->slots[i]) <=
+			    last_snapshot)
+				continue;
+
+			*level = i;
+			return 0;
+		}
+		free_extent_buffer(path->nodes[i]);
+		path->nodes[i] = NULL;
+	}
+	return 1;
+}
+
+/*
+ * walk down reloc tree to find relocated block of lowest level
+ */
+static noinline_for_stack
+int walk_down_reloc_tree(struct btrfs_root *root, struct btrfs_path *path,
+			 int *level)
+{
+	struct extent_buffer *eb = NULL;
+	int i;
+	u64 bytenr;
+	u64 ptr_gen = 0;
+	u64 last_snapshot;
+	u32 blocksize;
+	u32 nritems;
+
+	last_snapshot = btrfs_root_last_snapshot(&root->root_item);
+
+	for (i = *level; i > 0; i--) {
+		eb = path->nodes[i];
+		nritems = btrfs_header_nritems(eb);
+		while (path->slots[i] < nritems) {
+			ptr_gen = btrfs_node_ptr_generation(eb, path->slots[i]);
+			if (ptr_gen > last_snapshot)
+				break;
+			path->slots[i]++;
+		}
+		if (path->slots[i] >= nritems) {
+			if (i == *level)
+				break;
+			*level = i + 1;
+			return 0;
+		}
+		if (i == 1) {
+			*level = i;
+			return 0;
+		}
+
+		bytenr = btrfs_node_blockptr(eb, path->slots[i]);
+		blocksize = btrfs_level_size(root, i - 1);
+		eb = read_tree_block(root, bytenr, blocksize, ptr_gen);
+		BUG_ON(btrfs_header_level(eb) != i - 1);
+		path->nodes[i - 1] = eb;
+		path->slots[i - 1] = 0;
+	}
+	return 1;
+}
+
+/*
+ * invalidate extent cache for file extents whose key in range of
+ * [min_key, max_key)
+ */
+static int invalidate_extent_cache(struct btrfs_root *root,
+				   struct btrfs_key *min_key,
+				   struct btrfs_key *max_key)
+{
+	struct inode *inode = NULL;
+	u64 objectid;
+	u64 start, end;
+
+	objectid = min_key->objectid;
+	while (1) {
+		cond_resched();
+		iput(inode);
+
+		if (objectid > max_key->objectid)
+			break;
+
+		inode = find_next_inode(root, objectid);
+		if (!inode)
+			break;
+
+		if (inode->i_ino > max_key->objectid) {
+			iput(inode);
+			break;
+		}
+
+		objectid = inode->i_ino + 1;
+		if (!S_ISREG(inode->i_mode))
+			continue;
+
+		if (unlikely(min_key->objectid == inode->i_ino)) {
+			if (min_key->type > BTRFS_EXTENT_DATA_KEY)
+				continue;
+			if (min_key->type < BTRFS_EXTENT_DATA_KEY)
+				start = 0;
+			else {
+				start = min_key->offset;
+				WARN_ON(!IS_ALIGNED(start, root->sectorsize));
+			}
+		} else {
+			start = 0;
+		}
+
+		if (unlikely(max_key->objectid == inode->i_ino)) {
+			if (max_key->type < BTRFS_EXTENT_DATA_KEY)
+				continue;
+			if (max_key->type > BTRFS_EXTENT_DATA_KEY) {
+				end = (u64)-1;
+			} else {
+				if (max_key->offset == 0)
+					continue;
+				end = max_key->offset;
+				WARN_ON(!IS_ALIGNED(end, root->sectorsize));
+				end--;
+			}
+		} else {
+			end = (u64)-1;
+		}
+
+		/* the lock_extent waits for readpage to complete */
+		lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+		btrfs_drop_extent_cache(inode, start, end, 1);
+		unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+	}
+	return 0;
+}
+
+static int find_next_key(struct btrfs_path *path, int level,
+			 struct btrfs_key *key)
+
+{
+	while (level < BTRFS_MAX_LEVEL) {
+		if (!path->nodes[level])
+			break;
+		if (path->slots[level] + 1 <
+		    btrfs_header_nritems(path->nodes[level])) {
+			btrfs_node_key_to_cpu(path->nodes[level], key,
+					      path->slots[level] + 1);
+			return 0;
+		}
+		level++;
+	}
+	return 1;
+}
+
+/*
+ * merge the relocated tree blocks in reloc tree with corresponding
+ * fs tree.
+ */
+static noinline_for_stack int merge_reloc_root(struct reloc_control *rc,
+					       struct btrfs_root *root)
+{
+	LIST_HEAD(inode_list);
+	struct btrfs_key key;
+	struct btrfs_key next_key;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *reloc_root;
+	struct btrfs_root_item *root_item;
+	struct btrfs_path *path;
+	struct extent_buffer *leaf = NULL;
+	unsigned long nr;
+	int level;
+	int max_level;
+	int replaced = 0;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	reloc_root = root->reloc_root;
+	root_item = &reloc_root->root_item;
+
+	if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
+		level = btrfs_root_level(root_item);
+		extent_buffer_get(reloc_root->node);
+		path->nodes[level] = reloc_root->node;
+		path->slots[level] = 0;
+	} else {
+		btrfs_disk_key_to_cpu(&key, &root_item->drop_progress);
+
+		level = root_item->drop_level;
+		BUG_ON(level == 0);
+		path->lowest_level = level;
+		ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+		if (ret < 0) {
+			btrfs_free_path(path);
+			return ret;
+		}
+
+		btrfs_node_key_to_cpu(path->nodes[level], &next_key,
+				      path->slots[level]);
+		WARN_ON(memcmp(&key, &next_key, sizeof(key)));
+
+		btrfs_unlock_up_safe(path, 0);
+	}
+
+	if (level == 0 && rc->stage == UPDATE_DATA_PTRS) {
+		trans = btrfs_start_transaction(root, 1);
+
+		leaf = path->nodes[0];
+		btrfs_item_key_to_cpu(leaf, &key, 0);
+		btrfs_release_path(reloc_root, path);
+
+		ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+
+		leaf = path->nodes[0];
+		btrfs_unlock_up_safe(path, 1);
+		ret = replace_file_extents(trans, rc, root, leaf,
+					   &inode_list);
+		if (ret < 0)
+			err = ret;
+		goto out;
+	}
+
+	memset(&next_key, 0, sizeof(next_key));
+
+	while (1) {
+		leaf = NULL;
+		replaced = 0;
+		trans = btrfs_start_transaction(root, 1);
+		max_level = level;
+
+		ret = walk_down_reloc_tree(reloc_root, path, &level);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		if (ret > 0)
+			break;
+
+		if (!find_next_key(path, level, &key) &&
+		    btrfs_comp_cpu_keys(&next_key, &key) >= 0) {
+			ret = 0;
+		} else if (level == 1 && rc->stage == UPDATE_DATA_PTRS) {
+			ret = replace_path(trans, root, reloc_root,
+					   path, &next_key, &leaf,
+					   level, max_level);
+		} else {
+			ret = replace_path(trans, root, reloc_root,
+					   path, &next_key, NULL,
+					   level, max_level);
+		}
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+
+		if (ret > 0) {
+			level = ret;
+			btrfs_node_key_to_cpu(path->nodes[level], &key,
+					      path->slots[level]);
+			replaced = 1;
+		} else if (leaf) {
+			/*
+			 * no block got replaced, try replacing file extents
+			 */
+			btrfs_item_key_to_cpu(leaf, &key, 0);
+			ret = replace_file_extents(trans, rc, root, leaf,
+						   &inode_list);
+			btrfs_tree_unlock(leaf);
+			free_extent_buffer(leaf);
+			BUG_ON(ret < 0);
+		}
+
+		ret = walk_up_reloc_tree(reloc_root, path, &level);
+		if (ret > 0)
+			break;
+
+		BUG_ON(level == 0);
+		/*
+		 * save the merging progress in the drop_progress.
+		 * this is OK since root refs == 1 in this case.
+		 */
+		btrfs_node_key(path->nodes[level], &root_item->drop_progress,
+			       path->slots[level]);
+		root_item->drop_level = level;
+
+		nr = trans->blocks_used;
+		btrfs_end_transaction(trans, root);
+
+		btrfs_btree_balance_dirty(root, nr);
+
+		if (replaced && rc->stage == UPDATE_DATA_PTRS)
+			invalidate_extent_cache(root, &key, &next_key);
+	}
+
+	/*
+	 * handle the case only one block in the fs tree need to be
+	 * relocated and the block is tree root.
+	 */
+	leaf = btrfs_lock_root_node(root);
+	ret = btrfs_cow_block(trans, root, leaf, NULL, 0, &leaf);
+	btrfs_tree_unlock(leaf);
+	free_extent_buffer(leaf);
+	if (ret < 0)
+		err = ret;
+out:
+	btrfs_free_path(path);
+
+	if (err == 0) {
+		memset(&root_item->drop_progress, 0,
+		       sizeof(root_item->drop_progress));
+		root_item->drop_level = 0;
+		btrfs_set_root_refs(root_item, 0);
+	}
+
+	nr = trans->blocks_used;
+	btrfs_end_transaction(trans, root);
+
+	btrfs_btree_balance_dirty(root, nr);
+
+	/*
+	 * put inodes while we aren't holding the tree locks
+	 */
+	while (!list_empty(&inode_list)) {
+		struct inodevec *ivec;
+		ivec = list_entry(inode_list.next, struct inodevec, list);
+		list_del(&ivec->list);
+		while (ivec->nr > 0) {
+			ivec->nr--;
+			iput(ivec->inode[ivec->nr]);
+		}
+		kfree(ivec);
+	}
+
+	if (replaced && rc->stage == UPDATE_DATA_PTRS)
+		invalidate_extent_cache(root, &key, &next_key);
+
+	return err;
+}
+
+/*
+ * callback for the work threads.
+ * this function merges reloc tree with corresponding fs tree,
+ * and then drops the reloc tree.
+ */
+static void merge_func(struct btrfs_work *work)
+{
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *root;
+	struct btrfs_root *reloc_root;
+	struct async_merge *async;
+
+	async = container_of(work, struct async_merge, work);
+	reloc_root = async->root;
+
+	if (btrfs_root_refs(&reloc_root->root_item) > 0) {
+		root = read_fs_root(reloc_root->fs_info,
+				    reloc_root->root_key.offset);
+		BUG_ON(IS_ERR(root));
+		BUG_ON(root->reloc_root != reloc_root);
+
+		merge_reloc_root(async->rc, root);
+
+		trans = btrfs_start_transaction(root, 1);
+		btrfs_update_reloc_root(trans, root);
+		btrfs_end_transaction(trans, root);
+	}
+
+	btrfs_drop_dead_root(reloc_root);
+
+	if (atomic_dec_and_test(async->num_pending))
+		complete(async->done);
+
+	kfree(async);
+}
+
+static int merge_reloc_roots(struct reloc_control *rc)
+{
+	struct async_merge *async;
+	struct btrfs_root *root;
+	struct completion done;
+	atomic_t num_pending;
+
+	init_completion(&done);
+	atomic_set(&num_pending, 1);
+
+	while (!list_empty(&rc->reloc_roots)) {
+		root = list_entry(rc->reloc_roots.next,
+				  struct btrfs_root, root_list);
+		list_del_init(&root->root_list);
+
+		async = kmalloc(sizeof(*async), GFP_NOFS);
+		BUG_ON(!async);
+		async->work.func = merge_func;
+		async->work.flags = 0;
+		async->rc = rc;
+		async->root = root;
+		async->done = &done;
+		async->num_pending = &num_pending;
+		atomic_inc(&num_pending);
+		btrfs_queue_worker(&rc->workers, &async->work);
+	}
+
+	if (!atomic_dec_and_test(&num_pending))
+		wait_for_completion(&done);
+
+	BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
+	return 0;
+}
+
+static void free_block_list(struct rb_root *blocks)
+{
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	while ((rb_node = rb_first(blocks))) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+		rb_erase(rb_node, blocks);
+		kfree(block);
+	}
+}
+
+static int record_reloc_root_in_trans(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *reloc_root)
+{
+	struct btrfs_root *root;
+
+	if (reloc_root->last_trans == trans->transid)
+		return 0;
+
+	root = read_fs_root(reloc_root->fs_info, reloc_root->root_key.offset);
+	BUG_ON(IS_ERR(root));
+	BUG_ON(root->reloc_root != reloc_root);
+
+	return btrfs_record_root_in_trans(trans, root);
+}
+
+/*
+ * select one tree from trees that references the block.
+ * for blocks in refernce counted trees, we preper reloc tree.
+ * if no reloc tree found and reloc_only is true, NULL is returned.
+ */
+static struct btrfs_root *__select_one_root(struct btrfs_trans_handle *trans,
+					    struct backref_node *node,
+					    struct backref_edge *edges[],
+					    int *nr, int reloc_only)
+{
+	struct backref_node *next;
+	struct btrfs_root *root;
+	int index;
+	int loop = 0;
+again:
+	index = 0;
+	next = node;
+	while (1) {
+		cond_resched();
+		next = walk_up_backref(next, edges, &index);
+		root = next->root;
+		if (!root) {
+			BUG_ON(!node->old_root);
+			goto skip;
+		}
+
+		/* no other choice for non-refernce counted tree */
+		if (!root->ref_cows) {
+			BUG_ON(reloc_only);
+			break;
+		}
+
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
+			record_reloc_root_in_trans(trans, root);
+			break;
+		}
+
+		if (loop) {
+			btrfs_record_root_in_trans(trans, root);
+			break;
+		}
+
+		if (reloc_only || next != node) {
+			if (!root->reloc_root)
+				btrfs_record_root_in_trans(trans, root);
+			root = root->reloc_root;
+			/*
+			 * if the reloc tree was created in current
+			 * transation, there is no node in backref tree
+			 * corresponds to the root of the reloc tree.
+			 */
+			if (btrfs_root_last_snapshot(&root->root_item) ==
+			    trans->transid - 1)
+				break;
+		}
+skip:
+		root = NULL;
+		next = walk_down_backref(edges, &index);
+		if (!next || next->level <= node->level)
+			break;
+	}
+
+	if (!root && !loop && !reloc_only) {
+		loop = 1;
+		goto again;
+	}
+
+	if (root)
+		*nr = index;
+	else
+		*nr = 0;
+
+	return root;
+}
+
+static noinline_for_stack
+struct btrfs_root *select_one_root(struct btrfs_trans_handle *trans,
+				   struct backref_node *node)
+{
+	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	int nr;
+	return __select_one_root(trans, node, edges, &nr, 0);
+}
+
+static noinline_for_stack
+struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
+				     struct backref_node *node,
+				     struct backref_edge *edges[], int *nr)
+{
+	return __select_one_root(trans, node, edges, nr, 1);
+}
+
+static void grab_path_buffers(struct btrfs_path *path,
+			      struct backref_node *node,
+			      struct backref_edge *edges[], int nr)
+{
+	int i = 0;
+	while (1) {
+		drop_node_buffer(node);
+		node->eb = path->nodes[node->level];
+		BUG_ON(!node->eb);
+		if (path->locks[node->level])
+			node->locked = 1;
+		path->nodes[node->level] = NULL;
+		path->locks[node->level] = 0;
+
+		if (i >= nr)
+			break;
+
+		edges[i]->blockptr = node->eb->start;
+		node = edges[i]->node[UPPER];
+		i++;
+	}
+}
+
+/*
+ * relocate a block tree, and then update pointers in upper level
+ * blocks that reference the block to point to the new location.
+ *
+ * if called by link_to_upper, the block has already been relocated.
+ * in that case this function just updates pointers.
+ */
+static int do_relocation(struct btrfs_trans_handle *trans,
+			 struct backref_node *node,
+			 struct btrfs_key *key,
+			 struct btrfs_path *path, int lowest)
+{
+	struct backref_node *upper;
+	struct backref_edge *edge;
+	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	struct btrfs_root *root;
+	struct extent_buffer *eb;
+	u32 blocksize;
+	u64 bytenr;
+	u64 generation;
+	int nr;
+	int slot;
+	int ret;
+	int err = 0;
+
+	BUG_ON(lowest && node->eb);
+
+	path->lowest_level = node->level + 1;
+	list_for_each_entry(edge, &node->upper, list[LOWER]) {
+		cond_resched();
+		if (node->eb && node->eb->start == edge->blockptr)
+			continue;
+
+		upper = edge->node[UPPER];
+		root = select_reloc_root(trans, upper, edges, &nr);
+		if (!root)
+			continue;
+
+		if (upper->eb && !upper->locked)
+			drop_node_buffer(upper);
+
+		if (!upper->eb) {
+			ret = btrfs_search_slot(trans, root, key, path, 0, 1);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			BUG_ON(ret > 0);
+
+			slot = path->slots[upper->level];
+
+			btrfs_unlock_up_safe(path, upper->level + 1);
+			grab_path_buffers(path, upper, edges, nr);
+
+			btrfs_release_path(NULL, path);
+		} else {
+			ret = btrfs_bin_search(upper->eb, key, upper->level,
+					       &slot);
+			BUG_ON(ret);
+		}
+
+		bytenr = btrfs_node_blockptr(upper->eb, slot);
+		if (!lowest) {
+			if (node->eb->start == bytenr) {
+				btrfs_tree_unlock(upper->eb);
+				upper->locked = 0;
+				continue;
+			}
+		} else {
+			BUG_ON(node->bytenr != bytenr);
+		}
+
+		blocksize = btrfs_level_size(root, node->level);
+		generation = btrfs_node_ptr_generation(upper->eb, slot);
+		eb = read_tree_block(root, bytenr, blocksize, generation);
+		btrfs_tree_lock(eb);
+		btrfs_set_lock_blocking(eb);
+
+		if (!node->eb) {
+			ret = btrfs_cow_block(trans, root, eb, upper->eb,
+					      slot, &eb);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			btrfs_set_lock_blocking(eb);
+			node->eb = eb;
+			node->locked = 1;
+		} else {
+			btrfs_set_node_blockptr(upper->eb, slot,
+						node->eb->start);
+			btrfs_set_node_ptr_generation(upper->eb, slot,
+						      trans->transid);
+			btrfs_mark_buffer_dirty(upper->eb);
+
+			ret = btrfs_inc_extent_ref(trans, root,
+						node->eb->start, blocksize,
+						upper->eb->start,
+						btrfs_header_owner(upper->eb),
+						node->level, 0);
+			BUG_ON(ret);
+
+			ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
+			BUG_ON(ret);
+
+			btrfs_tree_unlock(eb);
+			free_extent_buffer(eb);
+		}
+		if (!lowest) {
+			btrfs_tree_unlock(upper->eb);
+			upper->locked = 0;
+		}
+	}
+	path->lowest_level = 0;
+	return err;
+}
+
+static int link_to_upper(struct btrfs_trans_handle *trans,
+			 struct backref_node *node,
+			 struct btrfs_path *path)
+{
+	struct btrfs_key key;
+	if (!node->eb || list_empty(&node->upper))
+		return 0;
+
+	btrfs_node_key_to_cpu(node->eb, &key, 0);
+	return do_relocation(trans, node, &key, path, 0);
+}
+
+static int finish_pending_nodes(struct btrfs_trans_handle *trans,
+				struct backref_cache *cache,
+				struct btrfs_path *path)
+{
+	struct backref_node *node;
+	int level;
+	int ret;
+	int err = 0;
+
+	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+		while (!list_empty(&cache->pending[level])) {
+			node = list_entry(cache->pending[level].next,
+					  struct backref_node, lower);
+			BUG_ON(node->level != level);
+
+			ret = link_to_upper(trans, node, path);
+			if (ret < 0)
+				err = ret;
+			/*
+			 * this remove the node from the pending list and
+			 * may add some other nodes to the level + 1
+			 * pending list
+			 */
+			remove_backref_node(cache, node);
+		}
+	}
+	BUG_ON(!RB_EMPTY_ROOT(&cache->rb_root));
+	return err;
+}
+
+static void mark_block_processed(struct reloc_control *rc,
+				 struct backref_node *node)
+{
+	u32 blocksize;
+	if (node->level == 0 ||
+	    in_block_group(node->bytenr, rc->block_group)) {
+		blocksize = btrfs_level_size(rc->extent_root, node->level);
+		set_extent_bits(&rc->processed_blocks, node->bytenr,
+				node->bytenr + blocksize - 1, EXTENT_DIRTY,
+				GFP_NOFS);
+	}
+	node->processed = 1;
+}
+
+/*
+ * mark a block and all blocks directly/indirectly reference the block
+ * as processed.
+ */
+static void update_processed_blocks(struct reloc_control *rc,
+				    struct backref_node *node)
+{
+	struct backref_node *next = node;
+	struct backref_edge *edge;
+	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	int index = 0;
+
+	while (next) {
+		cond_resched();
+		while (1) {
+			if (next->processed)
+				break;
+
+			mark_block_processed(rc, next);
+
+			if (list_empty(&next->upper))
+				break;
+
+			edge = list_entry(next->upper.next,
+					  struct backref_edge, list[LOWER]);
+			edges[index++] = edge;
+			next = edge->node[UPPER];
+		}
+		next = walk_down_backref(edges, &index);
+	}
+}
+
+static int tree_block_processed(u64 bytenr, u32 blocksize,
+				struct reloc_control *rc)
+{
+	if (test_range_bit(&rc->processed_blocks, bytenr,
+			   bytenr + blocksize - 1, EXTENT_DIRTY, 1))
+		return 1;
+	return 0;
+}
+
+/*
+ * check if there are any file extent pointers in the leaf point to
+ * data require processing
+ */
+static int check_file_extents(struct reloc_control *rc,
+			      u64 bytenr, u32 blocksize, u64 ptr_gen)
+{
+	struct btrfs_key found_key;
+	struct btrfs_file_extent_item *fi;
+	struct extent_buffer *leaf;
+	u32 nritems;
+	int i;
+	int ret = 0;
+
+	leaf = read_tree_block(rc->extent_root, bytenr, blocksize, ptr_gen);
+
+	nritems = btrfs_header_nritems(leaf);
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		btrfs_item_key_to_cpu(leaf, &found_key, i);
+		if (found_key.type != BTRFS_EXTENT_DATA_KEY)
+			continue;
+		fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
+		if (btrfs_file_extent_type(leaf, fi) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			continue;
+		bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+		if (bytenr == 0)
+			continue;
+		if (in_block_group(bytenr, rc->block_group)) {
+			ret = 1;
+			break;
+		}
+	}
+	free_extent_buffer(leaf);
+	return ret;
+}
+
+/*
+ * scan child blocks of a given block to find blocks require processing
+ */
+static int add_child_blocks(struct btrfs_trans_handle *trans,
+			    struct reloc_control *rc,
+			    struct backref_node *node,
+			    struct rb_root *blocks)
+{
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	u64 bytenr;
+	u64 ptr_gen;
+	u32 blocksize;
+	u32 nritems;
+	int i;
+	int err = 0;
+
+	nritems = btrfs_header_nritems(node->eb);
+	blocksize = btrfs_level_size(rc->extent_root, node->level - 1);
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		bytenr = btrfs_node_blockptr(node->eb, i);
+		ptr_gen = btrfs_node_ptr_generation(node->eb, i);
+		if (ptr_gen == trans->transid)
+			continue;
+		if (!in_block_group(bytenr, rc->block_group) &&
+		    (node->level > 1 || rc->stage == MOVE_DATA_EXTENTS))
+			continue;
+		if (tree_block_processed(bytenr, blocksize, rc))
+			continue;
+
+		readahead_tree_block(rc->extent_root,
+				     bytenr, blocksize, ptr_gen);
+	}
+
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		bytenr = btrfs_node_blockptr(node->eb, i);
+		ptr_gen = btrfs_node_ptr_generation(node->eb, i);
+		if (ptr_gen == trans->transid)
+			continue;
+		if (!in_block_group(bytenr, rc->block_group) &&
+		    (node->level > 1 || rc->stage == MOVE_DATA_EXTENTS))
+			continue;
+		if (tree_block_processed(bytenr, blocksize, rc))
+			continue;
+		if (!in_block_group(bytenr, rc->block_group) &&
+		    !check_file_extents(rc, bytenr, blocksize, ptr_gen))
+			continue;
+
+		block = kmalloc(sizeof(*block), GFP_NOFS);
+		if (!block) {
+			err = -ENOMEM;
+			break;
+		}
+		block->bytenr = bytenr;
+		btrfs_node_key_to_cpu(node->eb, &block->key, i);
+		block->level = node->level - 1;
+		block->key_ready = 1;
+		rb_node = tree_insert(blocks, block->bytenr, &block->rb_node);
+		BUG_ON(rb_node);
+	}
+	if (err)
+		free_block_list(blocks);
+	return err;
+}
+
+/*
+ * find adjacent blocks require processing
+ */
+static noinline_for_stack
+int add_adjacent_blocks(struct btrfs_trans_handle *trans,
+			struct reloc_control *rc,
+			struct backref_cache *cache,
+			struct rb_root *blocks, int level,
+			struct backref_node **upper)
+{
+	struct backref_node *node;
+	int ret = 0;
+
+	WARN_ON(!list_empty(&cache->pending[level]));
+
+	if (list_empty(&cache->pending[level + 1]))
+		return 1;
+
+	node = list_entry(cache->pending[level + 1].next,
+			  struct backref_node, lower);
+	if (node->eb)
+		ret = add_child_blocks(trans, rc, node, blocks);
+
+	*upper = node;
+	return ret;
+}
+
+static int get_tree_block_key(struct reloc_control *rc,
+			      struct tree_block *block)
+{
+	struct extent_buffer *eb;
+
+	BUG_ON(block->key_ready);
+	eb = read_tree_block(rc->extent_root, block->bytenr,
+			     block->key.objectid, block->key.offset);
+	WARN_ON(btrfs_header_level(eb) != block->level);
+	if (block->level == 0)
+		btrfs_item_key_to_cpu(eb, &block->key, 0);
+	else
+		btrfs_node_key_to_cpu(eb, &block->key, 0);
+	free_extent_buffer(eb);
+	block->key_ready = 1;
+	return 0;
+}
+
+static int reada_tree_block(struct reloc_control *rc,
+			    struct tree_block *block)
+{
+	BUG_ON(block->key_ready);
+	readahead_tree_block(rc->extent_root, block->bytenr,
+			     block->key.objectid, block->key.offset);
+	return 0;
+}
+
+/*
+ * helper function to relocate a tree block
+ */
+static int relocate_tree_block(struct btrfs_trans_handle *trans,
+				struct reloc_control *rc,
+				struct backref_node *node,
+				struct btrfs_key *key,
+				struct btrfs_path *path)
+{
+	struct btrfs_root *root;
+	int ret;
+
+	root = select_one_root(trans, node);
+	if (unlikely(!root)) {
+		rc->found_old_snapshot = 1;
+		update_processed_blocks(rc, node);
+		return 0;
+	}
+
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
+		ret = do_relocation(trans, node, key, path, 1);
+		if (ret < 0)
+			goto out;
+		if (node->level == 0 && rc->stage == UPDATE_DATA_PTRS) {
+			ret = replace_file_extents(trans, rc, root,
+						   node->eb, NULL);
+			if (ret < 0)
+				goto out;
+		}
+		drop_node_buffer(node);
+	} else if (!root->ref_cows) {
+		path->lowest_level = node->level;
+		ret = btrfs_search_slot(trans, root, key, path, 0, 1);
+		btrfs_release_path(root, path);
+		if (ret < 0)
+			goto out;
+	} else if (root != node->root) {
+		WARN_ON(node->level > 0 || rc->stage != UPDATE_DATA_PTRS);
+	}
+
+	update_processed_blocks(rc, node);
+	ret = 0;
+out:
+	drop_node_buffer(node);
+	return ret;
+}
+
+/*
+ * relocate a list of blocks
+ */
+static noinline_for_stack
+int relocate_tree_blocks(struct btrfs_trans_handle *trans,
+			 struct reloc_control *rc, struct rb_root *blocks)
+{
+	struct backref_cache *cache;
+	struct backref_node *node;
+	struct btrfs_path *path;
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	int level = -1;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	cache = kmalloc(sizeof(*cache), GFP_NOFS);
+	if (!cache) {
+		btrfs_free_path(path);
+		return -ENOMEM;
+	}
+
+	backref_cache_init(cache);
+
+	rb_node = rb_first(blocks);
+	while (rb_node) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+		if (level == -1)
+			level = block->level;
+		else
+			BUG_ON(level != block->level);
+		if (!block->key_ready)
+			reada_tree_block(rc, block);
+		rb_node = rb_next(rb_node);
+	}
+
+	rb_node = rb_first(blocks);
+	while (rb_node) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+		if (!block->key_ready)
+			get_tree_block_key(rc, block);
+		rb_node = rb_next(rb_node);
+	}
+
+	rb_node = rb_first(blocks);
+	while (rb_node) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+
+		node = build_backref_tree(rc, cache, &block->key,
+					  block->level, block->bytenr);
+		if (IS_ERR(node)) {
+			err = PTR_ERR(node);
+			goto out;
+		}
+
+		ret = relocate_tree_block(trans, rc, node, &block->key,
+					  path);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		remove_backref_node(cache, node);
+		rb_node = rb_next(rb_node);
+	}
+
+	if (level > 0)
+		goto out;
+
+	free_block_list(blocks);
+
+	/*
+	 * now backrefs of some upper level tree blocks have been cached,
+	 * try relocating blocks referenced by these upper level blocks.
+	 */
+	while (1) {
+		struct backref_node *upper = NULL;
+		if (trans->transaction->in_commit ||
+		    trans->transaction->delayed_refs.flushing)
+			break;
+
+		ret = add_adjacent_blocks(trans, rc, cache, blocks, level,
+					  &upper);
+		if (ret < 0)
+			err = ret;
+		if (ret != 0)
+			break;
+
+		rb_node = rb_first(blocks);
+		while (rb_node) {
+			block = rb_entry(rb_node, struct tree_block, rb_node);
+			if (trans->transaction->in_commit ||
+			    trans->transaction->delayed_refs.flushing)
+				goto out;
+			BUG_ON(!block->key_ready);
+			node = build_backref_tree(rc, cache, &block->key,
+						  level, block->bytenr);
+			if (IS_ERR(node)) {
+				err = PTR_ERR(node);
+				goto out;
+			}
+
+			ret = relocate_tree_block(trans, rc, node,
+						  &block->key, path);
+			if (ret < 0) {
+				err = ret;
+				goto out;
+			}
+			remove_backref_node(cache, node);
+			rb_node = rb_next(rb_node);
+		}
+		free_block_list(blocks);
+
+		if (upper) {
+			ret = link_to_upper(trans, upper, path);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			remove_backref_node(cache, upper);
+		}
+	}
+out:
+	free_block_list(blocks);
+
+	ret = finish_pending_nodes(trans, cache, path);
+	if (ret < 0)
+		err = ret;
+
+	kfree(cache);
+	btrfs_free_path(path);
+	return err;
+}
+
+static noinline_for_stack
+int relocate_inode_pages(struct inode *inode, u64 start, u64 len)
+{
+	u64 page_start;
+	u64 page_end;
+	unsigned long i;
+	unsigned long first_index;
+	unsigned long last_index;
+	unsigned int total_read = 0;
+	unsigned int total_dirty = 0;
+	struct page *page;
+	struct file_ra_state *ra;
+	struct btrfs_ordered_extent *ordered;
+	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+	int ret = 0;
+
+	ra = kzalloc(sizeof(*ra), GFP_NOFS);
+	if (!ra)
+		return -ENOMEM;
+
+	mutex_lock(&inode->i_mutex);
+	first_index = start >> PAGE_CACHE_SHIFT;
+	last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
+
+	/* make sure the dirty trick played by the caller work */
+	ret = invalidate_inode_pages2_range(inode->i_mapping,
+					    first_index, last_index);
+	if (ret)
+		goto out_unlock;
+
+	file_ra_state_init(ra, inode->i_mapping);
+
+	for (i = first_index ; i <= last_index; i++) {
+		if (total_read % ra->ra_pages == 0) {
+			btrfs_force_ra(inode->i_mapping, ra, NULL, i,
+				min(last_index, ra->ra_pages + i - 1));
+		}
+		total_read++;
+again:
+		if (((u64)i << PAGE_CACHE_SHIFT) > i_size_read(inode))
+			BUG_ON(1);
+		page = grab_cache_page(inode->i_mapping, i);
+		if (!page) {
+			ret = -ENOMEM;
+			goto out_unlock;
+		}
+		if (!PageUptodate(page)) {
+			btrfs_readpage(NULL, page);
+			lock_page(page);
+			if (!PageUptodate(page)) {
+				unlock_page(page);
+				page_cache_release(page);
+				ret = -EIO;
+				goto out_unlock;
+			}
+		}
+		wait_on_page_writeback(page);
+
+		page_start = (u64)page->index << PAGE_CACHE_SHIFT;
+		page_end = page_start + PAGE_CACHE_SIZE - 1;
+		lock_extent(io_tree, page_start, page_end, GFP_NOFS);
+
+		ordered = btrfs_lookup_ordered_extent(inode, page_start);
+		if (ordered) {
+			unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+			unlock_page(page);
+			page_cache_release(page);
+			btrfs_start_ordered_extent(inode, ordered, 1);
+			btrfs_put_ordered_extent(ordered);
+			goto again;
+		}
+		set_page_extent_mapped(page);
+
+		if (i == first_index)
+			set_extent_bits(io_tree, page_start, page_end,
+					EXTENT_BOUNDARY, GFP_NOFS);
+		btrfs_set_extent_delalloc(inode, page_start, page_end);
+
+		set_page_dirty(page);
+		total_dirty++;
+
+		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		unlock_page(page);
+		page_cache_release(page);
+	}
+out_unlock:
+	mutex_unlock(&inode->i_mutex);
+	kfree(ra);
+	balance_dirty_pages_ratelimited_nr(inode->i_mapping, total_dirty);
+	return ret;
+}
+
+static noinline_for_stack
+int relocate_data_extent(struct inode *inode, struct btrfs_key *extent_key)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+	struct extent_map *em;
+	u64 start = extent_key->objectid - BTRFS_I(inode)->index_cnt;
+	u64 end = start + extent_key->offset - 1;
+
+	em = alloc_extent_map(GFP_NOFS);
+	em->start = start;
+	em->len = extent_key->offset;
+	em->block_len = extent_key->offset;
+	em->block_start = extent_key->objectid;
+	em->bdev = root->fs_info->fs_devices->latest_bdev;
+	set_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+	/* setup extent map to cheat btrfs_readpage */
+	lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+	while (1) {
+		int ret;
+		spin_lock(&em_tree->lock);
+		ret = add_extent_mapping(em_tree, em);
+		spin_unlock(&em_tree->lock);
+		if (ret != -EEXIST) {
+			free_extent_map(em);
+			break;
+		}
+		btrfs_drop_extent_cache(inode, start, end, 0);
+	}
+	unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+
+	return relocate_inode_pages(inode, start, extent_key->offset);
+}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static int get_ref_objectid_v0(struct reloc_control *rc,
+			       struct btrfs_path *path,
+			       struct btrfs_key *extent_key,
+			       u64 *ref_objectid, int *path_change)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	struct btrfs_extent_ref_v0 *ref0;
+	int ret;
+	int slot;
+
+	leaf = path->nodes[0];
+	slot = path->slots[0];
+	while (1) {
+		if (slot >= btrfs_header_nritems(leaf)) {
+			ret = btrfs_next_leaf(rc->extent_root, path);
+			if (ret < 0)
+				return ret;
+			BUG_ON(ret > 0);
+			leaf = path->nodes[0];
+			slot = path->slots[0];
+			if (path_change)
+				*path_change = 1;
+		}
+		btrfs_item_key_to_cpu(leaf, &key, slot);
+		if (key.objectid != extent_key->objectid)
+			return -ENOENT;
+
+		if (key.type != BTRFS_EXTENT_REF_V0_KEY) {
+			slot++;
+			continue;
+		}
+		ref0 = btrfs_item_ptr(leaf, slot,
+				struct btrfs_extent_ref_v0);
+		*ref_objectid = btrfs_ref_objectid_v0(leaf, ref0);
+		break;
+	}
+	return 0;
+}
+#endif
+
+/*
+ * helper to add a tree block to the list.
+ * the major work is getting the generation and level of the block
+ */
+static int add_tree_block(struct reloc_control *rc,
+			  struct btrfs_key *extent_key,
+			  struct btrfs_path *path,
+			  struct rb_root *blocks)
+{
+	struct extent_buffer *eb;
+	struct btrfs_extent_item *ei;
+	struct btrfs_tree_block_info *bi;
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	u32 item_size;
+	int level = -1;
+	int generation;
+
+	eb =  path->nodes[0];
+	item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+	if (item_size >= sizeof(*ei) + sizeof(*bi)) {
+		ei = btrfs_item_ptr(eb, path->slots[0],
+				struct btrfs_extent_item);
+		bi = (struct btrfs_tree_block_info *)(ei + 1);
+		generation = btrfs_extent_generation(eb, ei);
+		level = btrfs_tree_block_level(eb, bi);
+	} else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		u64 ref_owner;
+		int ret;
+
+		BUG_ON(item_size != sizeof(struct btrfs_extent_item_v0));
+		ret = get_ref_objectid_v0(rc, path, extent_key,
+					  &ref_owner, NULL);
+		BUG_ON(ref_owner >= BTRFS_MAX_LEVEL);
+		level = (int)ref_owner;
+		/* FIXME: get real generation */
+		generation = 0;
+#else
+		BUG();
+#endif
+	}
+
+	btrfs_release_path(rc->extent_root, path);
+
+	BUG_ON(level == -1);
+
+	block = kmalloc(sizeof(*block), GFP_NOFS);
+	if (!block)
+		return -ENOMEM;
+
+	block->bytenr = extent_key->objectid;
+	block->key.objectid = extent_key->offset;
+	block->key.offset = generation;
+	block->level = level;
+	block->key_ready = 0;
+
+	rb_node = tree_insert(blocks, block->bytenr, &block->rb_node);
+	BUG_ON(rb_node);
+
+	return 0;
+}
+
+/*
+ * helper to add tree blocks for backref of type BTRFS_SHARED_DATA_REF_KEY
+ */
+static int __add_tree_block(struct reloc_control *rc,
+			    u64 bytenr, u32 blocksize,
+			    struct rb_root *blocks)
+{
+	struct btrfs_path *path;
+	struct btrfs_key key;
+	int ret;
+
+	if (tree_block_processed(bytenr, blocksize, rc))
+		return 0;
+
+	if (tree_search(blocks, bytenr))
+		return 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	key.objectid = bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = blocksize;
+
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, rc->extent_root, &key, path, 0, 0);
+	if (ret < 0)
+		goto out;
+	BUG_ON(ret);
+
+	btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+	ret = add_tree_block(rc, &key, path, blocks);
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * helper to check if the block use full backrefs for pointers in it
+ */
+static int block_use_full_backref(struct reloc_control *rc,
+				  struct extent_buffer *eb)
+{
+	struct btrfs_path *path;
+	struct btrfs_extent_item *ei;
+	struct btrfs_key key;
+	u64 flags;
+	int ret;
+
+	if (btrfs_header_flag(eb, BTRFS_HEADER_FLAG_RELOC) ||
+	    btrfs_header_backref_rev(eb) < BTRFS_MIXED_BACKREF_REV)
+		return 1;
+
+	path = btrfs_alloc_path();
+	BUG_ON(!path);
+
+	key.objectid = eb->start;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = eb->len;
+
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, rc->extent_root,
+				&key, path, 0, 0);
+	BUG_ON(ret);
+
+	ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+			    struct btrfs_extent_item);
+	flags = btrfs_extent_flags(path->nodes[0], ei);
+	BUG_ON(!(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK));
+	if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+		ret = 1;
+	else
+		ret = 0;
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * helper to add tree blocks for backref of type BTRFS_EXTENT_DATA_REF_KEY
+ * this function scans fs tree to find blocks reference the data extent
+ */
+static int find_data_references(struct reloc_control *rc,
+				struct btrfs_key *extent_key,
+				struct extent_buffer *leaf,
+				struct btrfs_extent_data_ref *ref,
+				struct rb_root *blocks)
+{
+	struct btrfs_path *path;
+	struct tree_block *block;
+	struct btrfs_root *root;
+	struct btrfs_file_extent_item *fi;
+	struct rb_node *rb_node;
+	struct btrfs_key key;
+	u64 ref_root;
+	u64 ref_objectid;
+	u64 ref_offset;
+	u32 ref_count;
+	u32 nritems;
+	int err = 0;
+	int added = 0;
+	int counted;
+	int ret;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	ref_root = btrfs_extent_data_ref_root(leaf, ref);
+	ref_objectid = btrfs_extent_data_ref_objectid(leaf, ref);
+	ref_offset = btrfs_extent_data_ref_offset(leaf, ref);
+	ref_count = btrfs_extent_data_ref_count(leaf, ref);
+
+	root = read_fs_root(rc->extent_root->fs_info, ref_root);
+	if (IS_ERR(root)) {
+		err = PTR_ERR(root);
+		goto out;
+	}
+
+	key.objectid = ref_objectid;
+	key.offset = ref_offset;
+	key.type = BTRFS_EXTENT_DATA_KEY;
+
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	nritems = btrfs_header_nritems(leaf);
+	/*
+	 * the references in tree blocks that use full backrefs
+	 * are not counted in
+	 */
+	if (block_use_full_backref(rc, leaf))
+		counted = 0;
+	else
+		counted = 1;
+	rb_node = tree_search(blocks, leaf->start);
+	if (rb_node) {
+		if (counted)
+			added = 1;
+		else
+			path->slots[0] = nritems;
+	}
+
+	while (ref_count > 0) {
+		while (path->slots[0] >= nritems) {
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0) {
+				err = ret;
+				goto out;
+			}
+			if (ret > 0) {
+				WARN_ON(1);
+				goto out;
+			}
+
+			leaf = path->nodes[0];
+			nritems = btrfs_header_nritems(leaf);
+			added = 0;
+
+			if (block_use_full_backref(rc, leaf))
+				counted = 0;
+			else
+				counted = 1;
+			rb_node = tree_search(blocks, leaf->start);
+			if (rb_node) {
+				if (counted)
+					added = 1;
+				else
+					path->slots[0] = nritems;
+			}
+		}
+
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		if (key.objectid != ref_objectid ||
+		    key.type != BTRFS_EXTENT_DATA_KEY) {
+			WARN_ON(1);
+			break;
+		}
+
+		fi = btrfs_item_ptr(leaf, path->slots[0],
+				    struct btrfs_file_extent_item);
+
+		if (btrfs_file_extent_type(leaf, fi) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			goto next;
+
+		if (btrfs_file_extent_disk_bytenr(leaf, fi) !=
+		    extent_key->objectid)
+			goto next;
+
+		key.offset -= btrfs_file_extent_offset(leaf, fi);
+		if (key.offset != ref_offset)
+			goto next;
+
+		if (counted)
+			ref_count--;
+		if (added)
+			goto next;
+
+		if (!tree_block_processed(leaf->start, leaf->len, rc)) {
+			block = kmalloc(sizeof(*block), GFP_NOFS);
+			if (!block) {
+				err = -ENOMEM;
+				break;
+			}
+			block->bytenr = leaf->start;
+			btrfs_item_key_to_cpu(leaf, &block->key, 0);
+			block->level = 0;
+			block->key_ready = 1;
+			rb_node = tree_insert(blocks, block->bytenr,
+					      &block->rb_node);
+			BUG_ON(rb_node);
+		}
+		if (counted)
+			added = 1;
+		else
+			path->slots[0] = nritems;
+next:
+		path->slots[0]++;
+
+	}
+out:
+	btrfs_free_path(path);
+	return err;
+}
+
+/*
+ * hepler to find all tree blocks that reference a given data extent
+ */
+static noinline_for_stack
+int add_data_references(struct reloc_control *rc,
+			struct btrfs_key *extent_key,
+			struct btrfs_path *path,
+			struct rb_root *blocks)
+{
+	struct btrfs_key key;
+	struct extent_buffer *eb;
+	struct btrfs_extent_data_ref *dref;
+	struct btrfs_extent_inline_ref *iref;
+	unsigned long ptr;
+	unsigned long end;
+	u32 blocksize;
+	int ret;
+	int err = 0;
+
+	ret = get_new_location(rc->data_inode, NULL, extent_key->objectid,
+			       extent_key->offset);
+	BUG_ON(ret < 0);
+	if (ret > 0) {
+		/* the relocated data is fragmented */
+		rc->extents_skipped++;
+		btrfs_release_path(rc->extent_root, path);
+		return 0;
+	}
+
+	blocksize = btrfs_level_size(rc->extent_root, 0);
+
+	eb = path->nodes[0];
+	ptr = btrfs_item_ptr_offset(eb, path->slots[0]);
+	end = ptr + btrfs_item_size_nr(eb, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (ptr + sizeof(struct btrfs_extent_item_v0) == end)
+		ptr = end;
+	else
+#endif
+		ptr += sizeof(struct btrfs_extent_item);
+
+	while (ptr < end) {
+		iref = (struct btrfs_extent_inline_ref *)ptr;
+		key.type = btrfs_extent_inline_ref_type(eb, iref);
+		if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+			key.offset = btrfs_extent_inline_ref_offset(eb, iref);
+			ret = __add_tree_block(rc, key.offset, blocksize,
+					       blocks);
+		} else if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+			dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+			ret = find_data_references(rc, extent_key,
+						   eb, dref, blocks);
+		} else {
+			BUG();
+		}
+		ptr += btrfs_extent_inline_ref_size(key.type);
+	}
+	WARN_ON(ptr > end);
+
+	while (1) {
+		cond_resched();
+		eb = path->nodes[0];
+		if (path->slots[0] >= btrfs_header_nritems(eb)) {
+			ret = btrfs_next_leaf(rc->extent_root, path);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			if (ret > 0)
+				break;
+			eb = path->nodes[0];
+		}
+
+		btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+		if (key.objectid != extent_key->objectid)
+			break;
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		if (key.type == BTRFS_SHARED_DATA_REF_KEY ||
+		    key.type == BTRFS_EXTENT_REF_V0_KEY) {
+#else
+		BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
+		if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+#endif
+			ret = __add_tree_block(rc, key.offset, blocksize,
+					       blocks);
+		} else if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+			dref = btrfs_item_ptr(eb, path->slots[0],
+					      struct btrfs_extent_data_ref);
+			ret = find_data_references(rc, extent_key,
+						   eb, dref, blocks);
+		} else {
+			ret = 0;
+		}
+		if (ret) {
+			err = ret;
+			break;
+		}
+		path->slots[0]++;
+	}
+	btrfs_release_path(rc->extent_root, path);
+	if (err)
+		free_block_list(blocks);
+	return err;
+}
+
+/*
+ * hepler to find next unprocessed extent
+ */
+static noinline_for_stack
+int find_next_extent(struct btrfs_trans_handle *trans,
+		     struct reloc_control *rc, struct btrfs_path *path)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	u64 start, end, last;
+	int ret;
+
+	last = rc->block_group->key.objectid + rc->block_group->key.offset;
+	while (1) {
+		cond_resched();
+		if (rc->search_start >= last) {
+			ret = 1;
+			break;
+		}
+
+		key.objectid = rc->search_start;
+		key.type = BTRFS_EXTENT_ITEM_KEY;
+		key.offset = 0;
+
+		path->search_commit_root = 1;
+		path->skip_locking = 1;
+		ret = btrfs_search_slot(NULL, rc->extent_root, &key, path,
+					0, 0);
+		if (ret < 0)
+			break;
+next:
+		leaf = path->nodes[0];
+		if (path->slots[0] >= btrfs_header_nritems(leaf)) {
+			ret = btrfs_next_leaf(rc->extent_root, path);
+			if (ret != 0)
+				break;
+			leaf = path->nodes[0];
+		}
+
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		if (key.objectid >= last) {
+			ret = 1;
+			break;
+		}
+
+		if (key.type != BTRFS_EXTENT_ITEM_KEY ||
+		    key.objectid + key.offset <= rc->search_start) {
+			path->slots[0]++;
+			goto next;
+		}
+
+		ret = find_first_extent_bit(&rc->processed_blocks,
+					    key.objectid, &start, &end,
+					    EXTENT_DIRTY);
+
+		if (ret == 0 && start <= key.objectid) {
+			btrfs_release_path(rc->extent_root, path);
+			rc->search_start = end + 1;
+		} else {
+			rc->search_start = key.objectid + key.offset;
+			return 0;
+		}
+	}
+	btrfs_release_path(rc->extent_root, path);
+	return ret;
+}
+
+static void set_reloc_control(struct reloc_control *rc)
+{
+	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
+	mutex_lock(&fs_info->trans_mutex);
+	fs_info->reloc_ctl = rc;
+	mutex_unlock(&fs_info->trans_mutex);
+}
+
+static void unset_reloc_control(struct reloc_control *rc)
+{
+	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
+	mutex_lock(&fs_info->trans_mutex);
+	fs_info->reloc_ctl = NULL;
+	mutex_unlock(&fs_info->trans_mutex);
+}
+
+static int check_extent_flags(u64 flags)
+{
+	if ((flags & BTRFS_EXTENT_FLAG_DATA) &&
+	    (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK))
+		return 1;
+	if (!(flags & BTRFS_EXTENT_FLAG_DATA) &&
+	    !(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK))
+		return 1;
+	if ((flags & BTRFS_EXTENT_FLAG_DATA) &&
+	    (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+		return 1;
+	return 0;
+}
+
+static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
+{
+	struct rb_root blocks = RB_ROOT;
+	struct btrfs_key key;
+	struct btrfs_trans_handle *trans = NULL;
+	struct btrfs_path *path;
+	struct btrfs_extent_item *ei;
+	unsigned long nr;
+	u64 flags;
+	u32 item_size;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	rc->search_start = rc->block_group->key.objectid;
+	clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
+			  GFP_NOFS);
+
+	rc->create_reloc_root = 1;
+	set_reloc_control(rc);
+
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+
+	while (1) {
+		trans = btrfs_start_transaction(rc->extent_root, 1);
+
+		ret = find_next_extent(trans, rc, path);
+		if (ret < 0)
+			err = ret;
+		if (ret != 0)
+			break;
+
+		rc->extents_found++;
+
+		ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+				    struct btrfs_extent_item);
+		btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+		item_size = btrfs_item_size_nr(path->nodes[0],
+					       path->slots[0]);
+		if (item_size >= sizeof(*ei)) {
+			flags = btrfs_extent_flags(path->nodes[0], ei);
+			ret = check_extent_flags(flags);
+			BUG_ON(ret);
+
+		} else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+			u64 ref_owner;
+			int path_change = 0;
+
+			BUG_ON(item_size !=
+			       sizeof(struct btrfs_extent_item_v0));
+			ret = get_ref_objectid_v0(rc, path, &key, &ref_owner,
+						  &path_change);
+			if (ref_owner < BTRFS_FIRST_FREE_OBJECTID)
+				flags = BTRFS_EXTENT_FLAG_TREE_BLOCK;
+			else
+				flags = BTRFS_EXTENT_FLAG_DATA;
+
+			if (path_change) {
+				btrfs_release_path(rc->extent_root, path);
+
+				path->search_commit_root = 1;
+				path->skip_locking = 1;
+				ret = btrfs_search_slot(NULL, rc->extent_root,
+							&key, path, 0, 0);
+				if (ret < 0) {
+					err = ret;
+					break;
+				}
+				BUG_ON(ret > 0);
+			}
+#else
+			BUG();
+#endif
+		}
+
+		if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+			ret = add_tree_block(rc, &key, path, &blocks);
+		} else if (rc->stage == UPDATE_DATA_PTRS &&
+			 (flags & BTRFS_EXTENT_FLAG_DATA)) {
+			ret = add_data_references(rc, &key, path, &blocks);
+		} else {
+			btrfs_release_path(rc->extent_root, path);
+			ret = 0;
+		}
+		if (ret < 0) {
+			err = 0;
+			break;
+		}
+
+		if (!RB_EMPTY_ROOT(&blocks)) {
+			ret = relocate_tree_blocks(trans, rc, &blocks);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+		}
+
+		nr = trans->blocks_used;
+		btrfs_end_transaction_throttle(trans, rc->extent_root);
+		trans = NULL;
+		btrfs_btree_balance_dirty(rc->extent_root, nr);
+
+		if (rc->stage == MOVE_DATA_EXTENTS &&
+		    (flags & BTRFS_EXTENT_FLAG_DATA)) {
+			rc->found_file_extent = 1;
+			ret = relocate_data_extent(rc->data_inode, &key);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+		}
+	}
+	btrfs_free_path(path);
+
+	if (trans) {
+		nr = trans->blocks_used;
+		btrfs_end_transaction(trans, rc->extent_root);
+		btrfs_btree_balance_dirty(rc->extent_root, nr);
+	}
+
+	rc->create_reloc_root = 0;
+	smp_mb();
+
+	if (rc->extents_found > 0) {
+		trans = btrfs_start_transaction(rc->extent_root, 1);
+		btrfs_commit_transaction(trans, rc->extent_root);
+	}
+
+	merge_reloc_roots(rc);
+
+	unset_reloc_control(rc);
+
+	/* get rid of pinned extents */
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+
+	return err;
+}
+
+static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 u64 objectid, u64 size)
+{
+	struct btrfs_path *path;
+	struct btrfs_inode_item *item;
+	struct extent_buffer *leaf;
+	int ret;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	ret = btrfs_insert_empty_inode(trans, root, path, objectid);
+	if (ret)
+		goto out;
+
+	leaf = path->nodes[0];
+	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item);
+	memset_extent_buffer(leaf, 0, (unsigned long)item, sizeof(*item));
+	btrfs_set_inode_generation(leaf, item, 1);
+	btrfs_set_inode_size(leaf, item, size);
+	btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
+	btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
+	btrfs_mark_buffer_dirty(leaf);
+	btrfs_release_path(root, path);
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * helper to create inode for data relocation.
+ * the inode is in data relocation tree and its link count is 0
+ */
+static struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
+					struct btrfs_block_group_cache *group)
+{
+	struct inode *inode = NULL;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *root;
+	struct btrfs_key key;
+	unsigned long nr;
+	u64 objectid = BTRFS_FIRST_FREE_OBJECTID;
+	int err = 0;
+
+	root = read_fs_root(fs_info, BTRFS_DATA_RELOC_TREE_OBJECTID);
+	if (IS_ERR(root))
+		return ERR_CAST(root);
+
+	trans = btrfs_start_transaction(root, 1);
+	BUG_ON(!trans);
+
+	err = btrfs_find_free_objectid(trans, root, objectid, &objectid);
+	if (err)
+		goto out;
+
+	err = __insert_orphan_inode(trans, root, objectid, group->key.offset);
+	BUG_ON(err);
+
+	err = btrfs_insert_file_extent(trans, root, objectid, 0, 0, 0,
+				       group->key.offset, 0, group->key.offset,
+				       0, 0, 0);
+	BUG_ON(err);
+
+	key.objectid = objectid;
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.offset = 0;
+	inode = btrfs_iget(root->fs_info->sb, &key, root);
+	BUG_ON(IS_ERR(inode) || is_bad_inode(inode));
+	BTRFS_I(inode)->index_cnt = group->key.objectid;
+
+	err = btrfs_orphan_add(trans, inode);
+out:
+	nr = trans->blocks_used;
+	btrfs_end_transaction(trans, root);
+
+	btrfs_btree_balance_dirty(root, nr);
+	if (err) {
+		if (inode)
+			iput(inode);
+		inode = ERR_PTR(err);
+	}
+	return inode;
+}
+
+/*
+ * function to relocate all extents in a block group.
+ */
+int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start)
+{
+	struct btrfs_fs_info *fs_info = extent_root->fs_info;
+	struct reloc_control *rc;
+	int ret;
+	int err = 0;
+
+	rc = kzalloc(sizeof(*rc), GFP_NOFS);
+	if (!rc)
+		return -ENOMEM;
+
+	mapping_tree_init(&rc->reloc_root_tree);
+	extent_io_tree_init(&rc->processed_blocks, NULL, GFP_NOFS);
+	INIT_LIST_HEAD(&rc->reloc_roots);
+
+	rc->block_group = btrfs_lookup_block_group(fs_info, group_start);
+	BUG_ON(!rc->block_group);
+
+	btrfs_init_workers(&rc->workers, "relocate",
+			   fs_info->thread_pool_size);
+
+	rc->extent_root = extent_root;
+	btrfs_prepare_block_group_relocation(extent_root, rc->block_group);
+
+	rc->data_inode = create_reloc_inode(fs_info, rc->block_group);
+	if (IS_ERR(rc->data_inode)) {
+		err = PTR_ERR(rc->data_inode);
+		rc->data_inode = NULL;
+		goto out;
+	}
+
+	printk(KERN_INFO "btrfs: relocating block group %llu flags %llu\n",
+	       (unsigned long long)rc->block_group->key.objectid,
+	       (unsigned long long)rc->block_group->flags);
+
+	btrfs_start_delalloc_inodes(fs_info->tree_root);
+	btrfs_wait_ordered_extents(fs_info->tree_root, 0);
+
+	while (1) {
+		mutex_lock(&fs_info->cleaner_mutex);
+		btrfs_clean_old_snapshots(fs_info->tree_root);
+		mutex_unlock(&fs_info->cleaner_mutex);
+
+		rc->extents_found = 0;
+		rc->extents_skipped = 0;
+
+		ret = relocate_block_group(rc);
+		if (ret < 0) {
+			err = ret;
+			break;
+		}
+
+		if (rc->extents_found == 0)
+			break;
+
+		printk(KERN_INFO "btrfs: found %llu extents\n",
+			(unsigned long long)rc->extents_found);
+
+		if (rc->stage == MOVE_DATA_EXTENTS && rc->found_file_extent) {
+			btrfs_wait_ordered_range(rc->data_inode, 0, (u64)-1);
+			invalidate_mapping_pages(rc->data_inode->i_mapping,
+						 0, -1);
+			rc->stage = UPDATE_DATA_PTRS;
+		} else if (rc->stage == UPDATE_DATA_PTRS &&
+			   rc->extents_skipped >= rc->extents_found) {
+			iput(rc->data_inode);
+			rc->data_inode = create_reloc_inode(fs_info,
+							    rc->block_group);
+			if (IS_ERR(rc->data_inode)) {
+				err = PTR_ERR(rc->data_inode);
+				rc->data_inode = NULL;
+				break;
+			}
+			rc->stage = MOVE_DATA_EXTENTS;
+			rc->found_file_extent = 0;
+		}
+	}
+
+	filemap_fdatawrite_range(fs_info->btree_inode->i_mapping,
+				 rc->block_group->key.objectid,
+				 rc->block_group->key.objectid +
+				 rc->block_group->key.offset - 1);
+
+	WARN_ON(rc->block_group->pinned > 0);
+	WARN_ON(rc->block_group->reserved > 0);
+	WARN_ON(btrfs_block_group_used(&rc->block_group->item) > 0);
+out:
+	iput(rc->data_inode);
+	btrfs_stop_workers(&rc->workers);
+	btrfs_put_block_group(rc->block_group);
+	kfree(rc);
+	return err;
+}
+
+/*
+ * recover relocation interrupted by system crash.
+ *
+ * this function resumes merging reloc trees with corresponding fs trees.
+ * this is important for keeping the sharing of tree blocks
+ */
+int btrfs_recover_relocation(struct btrfs_root *root)
+{
+	LIST_HEAD(reloc_roots);
+	struct btrfs_key key;
+	struct btrfs_root *fs_root;
+	struct btrfs_root *reloc_root;
+	struct btrfs_path *path;
+	struct extent_buffer *leaf;
+	struct reloc_control *rc = NULL;
+	struct btrfs_trans_handle *trans;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	key.objectid = BTRFS_TREE_RELOC_OBJECTID;
+	key.type = BTRFS_ROOT_ITEM_KEY;
+	key.offset = (u64)-1;
+
+	while (1) {
+		ret = btrfs_search_slot(NULL, root->fs_info->tree_root, &key,
+					path, 0, 0);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		if (ret > 0) {
+			if (path->slots[0] == 0)
+				break;
+			path->slots[0]--;
+		}
+		leaf = path->nodes[0];
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		btrfs_release_path(root->fs_info->tree_root, path);
+
+		if (key.objectid != BTRFS_TREE_RELOC_OBJECTID ||
+		    key.type != BTRFS_ROOT_ITEM_KEY)
+			break;
+
+		reloc_root = btrfs_read_fs_root_no_radix(root, &key);
+		if (IS_ERR(reloc_root)) {
+			err = PTR_ERR(reloc_root);
+			goto out;
+		}
+
+		list_add(&reloc_root->root_list, &reloc_roots);
+
+		if (btrfs_root_refs(&reloc_root->root_item) > 0) {
+			fs_root = read_fs_root(root->fs_info,
+					       reloc_root->root_key.offset);
+			if (IS_ERR(fs_root)) {
+				err = PTR_ERR(fs_root);
+				goto out;
+			}
+		}
+
+		if (key.offset == 0)
+			break;
+
+		key.offset--;
+	}
+	btrfs_release_path(root->fs_info->tree_root, path);
+
+	if (list_empty(&reloc_roots))
+		goto out;
+
+	rc = kzalloc(sizeof(*rc), GFP_NOFS);
+	if (!rc) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	mapping_tree_init(&rc->reloc_root_tree);
+	INIT_LIST_HEAD(&rc->reloc_roots);
+	btrfs_init_workers(&rc->workers, "relocate",
+			   root->fs_info->thread_pool_size);
+	rc->extent_root = root->fs_info->extent_root;
+
+	set_reloc_control(rc);
+
+	while (!list_empty(&reloc_roots)) {
+		reloc_root = list_entry(reloc_roots.next,
+					struct btrfs_root, root_list);
+		list_del(&reloc_root->root_list);
+
+		if (btrfs_root_refs(&reloc_root->root_item) == 0) {
+			list_add_tail(&reloc_root->root_list,
+				      &rc->reloc_roots);
+			continue;
+		}
+
+		fs_root = read_fs_root(root->fs_info,
+				       reloc_root->root_key.offset);
+		BUG_ON(IS_ERR(fs_root));
+
+		__add_reloc_root(reloc_root);
+		fs_root->reloc_root = reloc_root;
+	}
+
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+
+	merge_reloc_roots(rc);
+
+	unset_reloc_control(rc);
+
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+out:
+	if (rc) {
+		btrfs_stop_workers(&rc->workers);
+		kfree(rc);
+	}
+	while (!list_empty(&reloc_roots)) {
+		reloc_root = list_entry(reloc_roots.next,
+					struct btrfs_root, root_list);
+		list_del(&reloc_root->root_list);
+		free_extent_buffer(reloc_root->node);
+		free_extent_buffer(reloc_root->commit_root);
+		kfree(reloc_root);
+	}
+	btrfs_free_path(path);
+
+	if (err == 0) {
+		/* cleanup orphan inode in data relocation tree */
+		fs_root = read_fs_root(root->fs_info,
+				       BTRFS_DATA_RELOC_TREE_OBJECTID);
+		if (IS_ERR(fs_root))
+			err = PTR_ERR(fs_root);
+	}
+	return err;
+}
+
+/*
+ * helper to add ordered checksum for data relocation.
+ *
+ * cloning checksum properly handles the nodatasum extents.
+ * it also saves CPU time to re-calculate the checksum.
+ */
+int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
+{
+	struct btrfs_ordered_sum *sums;
+	struct btrfs_sector_sum *sector_sum;
+	struct btrfs_ordered_extent *ordered;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	size_t offset;
+	int ret;
+	u64 disk_bytenr;
+	LIST_HEAD(list);
+
+	ordered = btrfs_lookup_ordered_extent(inode, file_pos);
+	BUG_ON(ordered->file_offset != file_pos || ordered->len != len);
+
+	disk_bytenr = file_pos + BTRFS_I(inode)->index_cnt;
+	ret = btrfs_lookup_csums_range(root->fs_info->csum_root, disk_bytenr,
+				       disk_bytenr + len - 1, &list);
+
+	while (!list_empty(&list)) {
+		sums = list_entry(list.next, struct btrfs_ordered_sum, list);
+		list_del_init(&sums->list);
+
+		sector_sum = sums->sums;
+		sums->bytenr = ordered->start;
+
+		offset = 0;
+		while (offset < sums->len) {
+			sector_sum->bytenr += ordered->start - disk_bytenr;
+			sector_sum++;
+			offset += root->sectorsize;
+		}
+
+		btrfs_add_ordered_sum(inode, ordered, sums);
+	}
+	btrfs_put_ordered_extent(ordered);
+	return 0;
+}
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index b48650de447..0ddc6d61c55 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -111,6 +111,15 @@ out:
 	return ret;
 }
 
+int btrfs_set_root_node(struct btrfs_root_item *item,
+			struct extent_buffer *node)
+{
+	btrfs_set_root_bytenr(item, node->start);
+	btrfs_set_root_level(item, btrfs_header_level(node));
+	btrfs_set_root_generation(item, btrfs_header_generation(node));
+	return 0;
+}
+
 /*
  * copy the data in 'item' into the btree
  */
@@ -164,8 +173,7 @@ int btrfs_insert_root(struct btrfs_trans_handle *trans, struct btrfs_root
  * offset lower than the latest root.  They need to be queued for deletion to
  * finish what was happening when we crashed.
  */
-int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid,
-			  struct btrfs_root *latest)
+int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid)
 {
 	struct btrfs_root *dead_root;
 	struct btrfs_item *item;
@@ -227,10 +235,7 @@ again:
 			goto err;
 		}
 
-		if (objectid == BTRFS_TREE_RELOC_OBJECTID)
-			ret = btrfs_add_dead_reloc_root(dead_root);
-		else
-			ret = btrfs_add_dead_root(dead_root, latest);
+		ret = btrfs_add_dead_root(dead_root);
 		if (ret)
 			goto err;
 		goto again;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 2ff7cd2db25..9f179d4832d 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -52,7 +52,6 @@
 #include "export.h"
 #include "compression.h"
 
-
 static struct super_operations btrfs_super_ops;
 
 static void btrfs_put_super(struct super_block *sb)
@@ -67,8 +66,8 @@ static void btrfs_put_super(struct super_block *sb)
 enum {
 	Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
 	Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
-	Opt_ssd, Opt_thread_pool, Opt_noacl,  Opt_compress, Opt_notreelog,
-	Opt_ratio, Opt_flushoncommit, Opt_err,
+	Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
+	Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_err,
 };
 
 static match_table_t tokens = {
@@ -84,6 +83,8 @@ static match_table_t tokens = {
 	{Opt_thread_pool, "thread_pool=%d"},
 	{Opt_compress, "compress"},
 	{Opt_ssd, "ssd"},
+	{Opt_ssd_spread, "ssd_spread"},
+	{Opt_nossd, "nossd"},
 	{Opt_noacl, "noacl"},
 	{Opt_notreelog, "notreelog"},
 	{Opt_flushoncommit, "flushoncommit"},
@@ -158,7 +159,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			 */
 			break;
 		case Opt_nodatasum:
-			printk(KERN_INFO "btrfs: setting nodatacsum\n");
+			printk(KERN_INFO "btrfs: setting nodatasum\n");
 			btrfs_set_opt(info->mount_opt, NODATASUM);
 			break;
 		case Opt_nodatacow:
@@ -174,6 +175,19 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			printk(KERN_INFO "btrfs: use ssd allocation scheme\n");
 			btrfs_set_opt(info->mount_opt, SSD);
 			break;
+		case Opt_ssd_spread:
+			printk(KERN_INFO "btrfs: use spread ssd "
+			       "allocation scheme\n");
+			btrfs_set_opt(info->mount_opt, SSD);
+			btrfs_set_opt(info->mount_opt, SSD_SPREAD);
+			break;
+		case Opt_nossd:
+			printk(KERN_INFO "btrfs: not using ssd allocation "
+			       "scheme\n");
+			btrfs_set_opt(info->mount_opt, NOSSD);
+			btrfs_clear_opt(info->mount_opt, SSD);
+			btrfs_clear_opt(info->mount_opt, SSD_SPREAD);
+			break;
 		case Opt_nobarrier:
 			printk(KERN_INFO "btrfs: turning off barriers\n");
 			btrfs_set_opt(info->mount_opt, NOBARRIER);
@@ -322,7 +336,7 @@ static int btrfs_fill_super(struct super_block *sb,
 	struct dentry *root_dentry;
 	struct btrfs_super_block *disk_super;
 	struct btrfs_root *tree_root;
-	struct btrfs_inode *bi;
+	struct btrfs_key key;
 	int err;
 
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
@@ -341,23 +355,15 @@ static int btrfs_fill_super(struct super_block *sb,
 	}
 	sb->s_fs_info = tree_root;
 	disk_super = &tree_root->fs_info->super_copy;
-	inode = btrfs_iget_locked(sb, BTRFS_FIRST_FREE_OBJECTID,
-				  tree_root->fs_info->fs_root);
-	bi = BTRFS_I(inode);
-	bi->location.objectid = inode->i_ino;
-	bi->location.offset = 0;
-	bi->root = tree_root->fs_info->fs_root;
-
-	btrfs_set_key_type(&bi->location, BTRFS_INODE_ITEM_KEY);
 
-	if (!inode) {
-		err = -ENOMEM;
+	key.objectid = BTRFS_FIRST_FREE_OBJECTID;
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.offset = 0;
+	inode = btrfs_iget(sb, &key, tree_root->fs_info->fs_root);
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
 		goto fail_close;
 	}
-	if (inode->i_state & I_NEW) {
-		btrfs_read_locked_inode(inode);
-		unlock_new_inode(inode);
-	}
 
 	root_dentry = d_alloc_root(inode);
 	if (!root_dentry) {
@@ -388,10 +394,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait)
 	struct btrfs_root *root = btrfs_sb(sb);
 	int ret;
 
-	if (sb->s_flags & MS_RDONLY)
-		return 0;
-
-	sb->s_dirt = 0;
 	if (!wait) {
 		filemap_flush(root->fs_info->btree_inode->i_mapping);
 		return 0;
@@ -402,7 +404,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait)
 
 	trans = btrfs_start_transaction(root, 1);
 	ret = btrfs_commit_transaction(trans, root);
-	sb->s_dirt = 0;
 	return ret;
 }
 
@@ -433,7 +434,11 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 		seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
 	if (btrfs_test_opt(root, COMPRESS))
 		seq_puts(seq, ",compress");
-	if (btrfs_test_opt(root, SSD))
+	if (btrfs_test_opt(root, NOSSD))
+		seq_puts(seq, ",nossd");
+	if (btrfs_test_opt(root, SSD_SPREAD))
+		seq_puts(seq, ",ssd_spread");
+	else if (btrfs_test_opt(root, SSD))
 		seq_puts(seq, ",ssd");
 	if (btrfs_test_opt(root, NOTREELOG))
 		seq_puts(seq, ",notreelog");
@@ -444,11 +449,6 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	return 0;
 }
 
-static void btrfs_write_super(struct super_block *sb)
-{
-	sb->s_dirt = 0;
-}
-
 static int btrfs_test_super(struct super_block *s, void *data)
 {
 	struct btrfs_fs_devices *test_fs_devices = data;
@@ -584,7 +584,8 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data)
 		if (btrfs_super_log_root(&root->fs_info->super_copy) != 0)
 			return -EINVAL;
 
-		ret = btrfs_cleanup_reloc_trees(root);
+		/* recover relocation */
+		ret = btrfs_recover_relocation(root);
 		WARN_ON(ret);
 
 		ret = btrfs_cleanup_fs_roots(root->fs_info);
@@ -678,7 +679,6 @@ static int btrfs_unfreeze(struct super_block *sb)
 static struct super_operations btrfs_super_ops = {
 	.delete_inode	= btrfs_delete_inode,
 	.put_super	= btrfs_put_super,
-	.write_super	= btrfs_write_super,
 	.sync_fs	= btrfs_sync_fs,
 	.show_options	= btrfs_show_options,
 	.write_inode	= btrfs_write_inode,
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 01b143605ec..4e83457ea25 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -25,7 +25,6 @@
 #include "disk-io.h"
 #include "transaction.h"
 #include "locking.h"
-#include "ref-cache.h"
 #include "tree-log.h"
 
 #define BTRFS_ROOT_TRANS_TAG 0
@@ -94,45 +93,37 @@ static noinline int join_transaction(struct btrfs_root *root)
  * to make sure the old root from before we joined the transaction is deleted
  * when the transaction commits
  */
-noinline int btrfs_record_root_in_trans(struct btrfs_root *root)
+static noinline int record_root_in_trans(struct btrfs_trans_handle *trans,
+					 struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
-	u64 running_trans_id = root->fs_info->running_transaction->transid;
-	if (root->ref_cows && root->last_trans < running_trans_id) {
+	if (root->ref_cows && root->last_trans < trans->transid) {
 		WARN_ON(root == root->fs_info->extent_root);
-		if (root->root_item.refs != 0) {
-			radix_tree_tag_set(&root->fs_info->fs_roots_radix,
-				   (unsigned long)root->root_key.objectid,
-				   BTRFS_ROOT_TRANS_TAG);
-
-			dirty = kmalloc(sizeof(*dirty), GFP_NOFS);
-			BUG_ON(!dirty);
-			dirty->root = kmalloc(sizeof(*dirty->root), GFP_NOFS);
-			BUG_ON(!dirty->root);
-			dirty->latest_root = root;
-			INIT_LIST_HEAD(&dirty->list);
-
-			root->commit_root = btrfs_root_node(root);
-
-			memcpy(dirty->root, root, sizeof(*root));
-			spin_lock_init(&dirty->root->node_lock);
-			spin_lock_init(&dirty->root->list_lock);
-			mutex_init(&dirty->root->objectid_mutex);
-			mutex_init(&dirty->root->log_mutex);
-			INIT_LIST_HEAD(&dirty->root->dead_list);
-			dirty->root->node = root->commit_root;
-			dirty->root->commit_root = NULL;
-
-			spin_lock(&root->list_lock);
-			list_add(&dirty->root->dead_list, &root->dead_list);
-			spin_unlock(&root->list_lock);
-
-			root->dirty_root = dirty;
-		} else {
-			WARN_ON(1);
-		}
-		root->last_trans = running_trans_id;
+		WARN_ON(root->root_item.refs == 0);
+		WARN_ON(root->commit_root != root->node);
+
+		radix_tree_tag_set(&root->fs_info->fs_roots_radix,
+			   (unsigned long)root->root_key.objectid,
+			   BTRFS_ROOT_TRANS_TAG);
+		root->last_trans = trans->transid;
+		btrfs_init_reloc_root(trans, root);
+	}
+	return 0;
+}
+
+int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+			       struct btrfs_root *root)
+{
+	if (!root->ref_cows)
+		return 0;
+
+	mutex_lock(&root->fs_info->trans_mutex);
+	if (root->last_trans == trans->transid) {
+		mutex_unlock(&root->fs_info->trans_mutex);
+		return 0;
 	}
+
+	record_root_in_trans(trans, root);
+	mutex_unlock(&root->fs_info->trans_mutex);
 	return 0;
 }
 
@@ -181,7 +172,6 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
 	ret = join_transaction(root);
 	BUG_ON(ret);
 
-	btrfs_record_root_in_trans(root);
 	h->transid = root->fs_info->running_transaction->transid;
 	h->transaction = root->fs_info->running_transaction;
 	h->blocks_reserved = num_blocks;
@@ -192,6 +182,7 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
 	h->delayed_ref_updates = 0;
 
 	root->fs_info->running_transaction->use_count++;
+	record_root_in_trans(h, root);
 	mutex_unlock(&root->fs_info->trans_mutex);
 	return h;
 }
@@ -233,6 +224,7 @@ static noinline int wait_for_commit(struct btrfs_root *root,
 	return 0;
 }
 
+#if 0
 /*
  * rate limit against the drop_snapshot code.  This helps to slow down new
  * operations if the drop_snapshot code isn't able to keep up.
@@ -273,6 +265,7 @@ harder:
 			goto harder;
 	}
 }
+#endif
 
 void btrfs_throttle(struct btrfs_root *root)
 {
@@ -280,7 +273,6 @@ void btrfs_throttle(struct btrfs_root *root)
 	if (!root->fs_info->open_ioctl_trans)
 		wait_current_trans(root);
 	mutex_unlock(&root->fs_info->trans_mutex);
-	throttle_on_drops(root);
 }
 
 static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
@@ -323,9 +315,6 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
 	memset(trans, 0, sizeof(*trans));
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
 
-	if (throttle)
-		throttle_on_drops(root);
-
 	return 0;
 }
 
@@ -462,12 +451,8 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 		old_root_bytenr = btrfs_root_bytenr(&root->root_item);
 		if (old_root_bytenr == root->node->start)
 			break;
-		btrfs_set_root_bytenr(&root->root_item,
-				       root->node->start);
-		btrfs_set_root_level(&root->root_item,
-				     btrfs_header_level(root->node));
-		btrfs_set_root_generation(&root->root_item, trans->transid);
 
+		btrfs_set_root_node(&root->root_item, root->node);
 		ret = btrfs_update_root(trans, tree_root,
 					&root->root_key,
 					&root->root_item);
@@ -477,14 +462,16 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 		ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
 		BUG_ON(ret);
 	}
+	free_extent_buffer(root->commit_root);
+	root->commit_root = btrfs_root_node(root);
 	return 0;
 }
 
 /*
  * update all the cowonly tree roots on disk
  */
-int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root)
+static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans,
+					 struct btrfs_root *root)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct list_head *next;
@@ -520,118 +507,54 @@ int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
  * a dirty root struct and adds it into the list of dead roots that need to
  * be deleted
  */
-int btrfs_add_dead_root(struct btrfs_root *root, struct btrfs_root *latest)
+int btrfs_add_dead_root(struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
-
-	dirty = kmalloc(sizeof(*dirty), GFP_NOFS);
-	if (!dirty)
-		return -ENOMEM;
-	dirty->root = root;
-	dirty->latest_root = latest;
-
 	mutex_lock(&root->fs_info->trans_mutex);
-	list_add(&dirty->list, &latest->fs_info->dead_roots);
+	list_add(&root->root_list, &root->fs_info->dead_roots);
 	mutex_unlock(&root->fs_info->trans_mutex);
 	return 0;
 }
 
 /*
- * at transaction commit time we need to schedule the old roots for
- * deletion via btrfs_drop_snapshot.  This runs through all the
- * reference counted roots that were modified in the current
- * transaction and puts them into the drop list
+ * update all the cowonly tree roots on disk
  */
-static noinline int add_dirty_roots(struct btrfs_trans_handle *trans,
-				    struct radix_tree_root *radix,
-				    struct list_head *list)
+static noinline int commit_fs_roots(struct btrfs_trans_handle *trans,
+				    struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
 	struct btrfs_root *gang[8];
-	struct btrfs_root *root;
+	struct btrfs_fs_info *fs_info = root->fs_info;
 	int i;
 	int ret;
 	int err = 0;
-	u32 refs;
 
 	while (1) {
-		ret = radix_tree_gang_lookup_tag(radix, (void **)gang, 0,
+		ret = radix_tree_gang_lookup_tag(&fs_info->fs_roots_radix,
+						 (void **)gang, 0,
 						 ARRAY_SIZE(gang),
 						 BTRFS_ROOT_TRANS_TAG);
 		if (ret == 0)
 			break;
 		for (i = 0; i < ret; i++) {
 			root = gang[i];
-			radix_tree_tag_clear(radix,
-				     (unsigned long)root->root_key.objectid,
-				     BTRFS_ROOT_TRANS_TAG);
-
-			BUG_ON(!root->ref_tree);
-			dirty = root->dirty_root;
+			radix_tree_tag_clear(&fs_info->fs_roots_radix,
+					(unsigned long)root->root_key.objectid,
+					BTRFS_ROOT_TRANS_TAG);
 
 			btrfs_free_log(trans, root);
-			btrfs_free_reloc_root(trans, root);
-
-			if (root->commit_root == root->node) {
-				WARN_ON(root->node->start !=
-					btrfs_root_bytenr(&root->root_item));
+			btrfs_update_reloc_root(trans, root);
 
+			if (root->commit_root != root->node) {
 				free_extent_buffer(root->commit_root);
-				root->commit_root = NULL;
-				root->dirty_root = NULL;
-
-				spin_lock(&root->list_lock);
-				list_del_init(&dirty->root->dead_list);
-				spin_unlock(&root->list_lock);
-
-				kfree(dirty->root);
-				kfree(dirty);
-
-				/* make sure to update the root on disk
-				 * so we get any updates to the block used
-				 * counts
-				 */
-				err = btrfs_update_root(trans,
-						root->fs_info->tree_root,
-						&root->root_key,
-						&root->root_item);
-				continue;
+				root->commit_root = btrfs_root_node(root);
+				btrfs_set_root_node(&root->root_item,
+						    root->node);
 			}
 
-			memset(&root->root_item.drop_progress, 0,
-			       sizeof(struct btrfs_disk_key));
-			root->root_item.drop_level = 0;
-			root->commit_root = NULL;
-			root->dirty_root = NULL;
-			root->root_key.offset = root->fs_info->generation;
-			btrfs_set_root_bytenr(&root->root_item,
-					      root->node->start);
-			btrfs_set_root_level(&root->root_item,
-					     btrfs_header_level(root->node));
-			btrfs_set_root_generation(&root->root_item,
-						  root->root_key.offset);
-
-			err = btrfs_insert_root(trans, root->fs_info->tree_root,
+			err = btrfs_update_root(trans, fs_info->tree_root,
 						&root->root_key,
 						&root->root_item);
 			if (err)
 				break;
-
-			refs = btrfs_root_refs(&dirty->root->root_item);
-			btrfs_set_root_refs(&dirty->root->root_item, refs - 1);
-			err = btrfs_update_root(trans, root->fs_info->tree_root,
-						&dirty->root->root_key,
-						&dirty->root->root_item);
-
-			BUG_ON(err);
-			if (refs == 1) {
-				list_add(&dirty->list, list);
-			} else {
-				WARN_ON(1);
-				free_extent_buffer(dirty->root->node);
-				kfree(dirty->root);
-				kfree(dirty);
-			}
 		}
 	}
 	return err;
@@ -688,12 +611,8 @@ static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info)
 				TASK_UNINTERRUPTIBLE);
 		mutex_unlock(&info->trans_mutex);
 
-		atomic_dec(&info->throttles);
-		wake_up(&info->transaction_throttle);
-
 		schedule();
 
-		atomic_inc(&info->throttles);
 		mutex_lock(&info->trans_mutex);
 		finish_wait(&info->transaction_wait, &wait);
 	}
@@ -705,111 +624,61 @@ static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info)
  * Given a list of roots that need to be deleted, call btrfs_drop_snapshot on
  * all of them
  */
-static noinline int drop_dirty_roots(struct btrfs_root *tree_root,
-				     struct list_head *list)
+int btrfs_drop_dead_root(struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
 	struct btrfs_trans_handle *trans;
+	struct btrfs_root *tree_root = root->fs_info->tree_root;
 	unsigned long nr;
-	u64 num_bytes;
-	u64 bytes_used;
-	u64 max_useless;
-	int ret = 0;
-	int err;
-
-	while (!list_empty(list)) {
-		struct btrfs_root *root;
-
-		dirty = list_entry(list->prev, struct btrfs_dirty_root, list);
-		list_del_init(&dirty->list);
-
-		num_bytes = btrfs_root_used(&dirty->root->root_item);
-		root = dirty->latest_root;
-		atomic_inc(&root->fs_info->throttles);
-
-		while (1) {
-			/*
-			 * we don't want to jump in and create a bunch of
-			 * delayed refs if the transaction is starting to close
-			 */
-			wait_transaction_pre_flush(tree_root->fs_info);
-			trans = btrfs_start_transaction(tree_root, 1);
-
-			/*
-			 * we've joined a transaction, make sure it isn't
-			 * closing right now
-			 */
-			if (trans->transaction->delayed_refs.flushing) {
-				btrfs_end_transaction(trans, tree_root);
-				continue;
-			}
-
-			mutex_lock(&root->fs_info->drop_mutex);
-			ret = btrfs_drop_snapshot(trans, dirty->root);
-			if (ret != -EAGAIN)
-				break;
-			mutex_unlock(&root->fs_info->drop_mutex);
+	int ret;
 
-			err = btrfs_update_root(trans,
-					tree_root,
-					&dirty->root->root_key,
-					&dirty->root->root_item);
-			if (err)
-				ret = err;
-			nr = trans->blocks_used;
-			ret = btrfs_end_transaction(trans, tree_root);
-			BUG_ON(ret);
+	while (1) {
+		/*
+		 * we don't want to jump in and create a bunch of
+		 * delayed refs if the transaction is starting to close
+		 */
+		wait_transaction_pre_flush(tree_root->fs_info);
+		trans = btrfs_start_transaction(tree_root, 1);
 
-			btrfs_btree_balance_dirty(tree_root, nr);
-			cond_resched();
+		/*
+		 * we've joined a transaction, make sure it isn't
+		 * closing right now
+		 */
+		if (trans->transaction->delayed_refs.flushing) {
+			btrfs_end_transaction(trans, tree_root);
+			continue;
 		}
-		BUG_ON(ret);
-		atomic_dec(&root->fs_info->throttles);
-		wake_up(&root->fs_info->transaction_throttle);
 
-		num_bytes -= btrfs_root_used(&dirty->root->root_item);
-		bytes_used = btrfs_root_used(&root->root_item);
-		if (num_bytes) {
-			mutex_lock(&root->fs_info->trans_mutex);
-			btrfs_record_root_in_trans(root);
-			mutex_unlock(&root->fs_info->trans_mutex);
-			btrfs_set_root_used(&root->root_item,
-					    bytes_used - num_bytes);
-		}
+		ret = btrfs_drop_snapshot(trans, root);
+		if (ret != -EAGAIN)
+			break;
 
-		ret = btrfs_del_root(trans, tree_root, &dirty->root->root_key);
-		if (ret) {
-			BUG();
+		ret = btrfs_update_root(trans, tree_root,
+					&root->root_key,
+					&root->root_item);
+		if (ret)
 			break;
-		}
-		mutex_unlock(&root->fs_info->drop_mutex);
-
-		spin_lock(&root->list_lock);
-		list_del_init(&dirty->root->dead_list);
-		if (!list_empty(&root->dead_list)) {
-			struct btrfs_root *oldest;
-			oldest = list_entry(root->dead_list.prev,
-					    struct btrfs_root, dead_list);
-			max_useless = oldest->root_key.offset - 1;
-		} else {
-			max_useless = root->root_key.offset - 1;
-		}
-		spin_unlock(&root->list_lock);
 
 		nr = trans->blocks_used;
 		ret = btrfs_end_transaction(trans, tree_root);
 		BUG_ON(ret);
 
-		ret = btrfs_remove_leaf_refs(root, max_useless, 0);
-		BUG_ON(ret);
-
-		free_extent_buffer(dirty->root->node);
-		kfree(dirty->root);
-		kfree(dirty);
-
 		btrfs_btree_balance_dirty(tree_root, nr);
 		cond_resched();
 	}
+	BUG_ON(ret);
+
+	ret = btrfs_del_root(trans, tree_root, &root->root_key);
+	BUG_ON(ret);
+
+	nr = trans->blocks_used;
+	ret = btrfs_end_transaction(trans, tree_root);
+	BUG_ON(ret);
+
+	free_extent_buffer(root->node);
+	free_extent_buffer(root->commit_root);
+	kfree(root);
+
+	btrfs_btree_balance_dirty(tree_root, nr);
 	return ret;
 }
 
@@ -839,24 +708,23 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	if (ret)
 		goto fail;
 
-	btrfs_record_root_in_trans(root);
+	record_root_in_trans(trans, root);
 	btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
 	memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
 
 	key.objectid = objectid;
-	key.offset = trans->transid;
+	key.offset = 0;
 	btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
 
 	old = btrfs_lock_root_node(root);
 	btrfs_cow_block(trans, root, old, NULL, 0, &old);
+	btrfs_set_lock_blocking(old);
 
 	btrfs_copy_root(trans, root, old, &tmp, objectid);
 	btrfs_tree_unlock(old);
 	free_extent_buffer(old);
 
-	btrfs_set_root_bytenr(new_root_item, tmp->start);
-	btrfs_set_root_level(new_root_item, btrfs_header_level(tmp));
-	btrfs_set_root_generation(new_root_item, trans->transid);
+	btrfs_set_root_node(new_root_item, tmp);
 	ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
 				new_root_item);
 	btrfs_tree_unlock(tmp);
@@ -964,6 +832,24 @@ static noinline int finish_pending_snapshots(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
+static void update_super_roots(struct btrfs_root *root)
+{
+	struct btrfs_root_item *root_item;
+	struct btrfs_super_block *super;
+
+	super = &root->fs_info->super_copy;
+
+	root_item = &root->fs_info->chunk_root->root_item;
+	super->chunk_root = root_item->bytenr;
+	super->chunk_root_generation = root_item->generation;
+	super->chunk_root_level = root_item->level;
+
+	root_item = &root->fs_info->tree_root->root_item;
+	super->root = root_item->bytenr;
+	super->generation = root_item->generation;
+	super->root_level = root_item->level;
+}
+
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root)
 {
@@ -971,8 +857,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	unsigned long timeout = 1;
 	struct btrfs_transaction *cur_trans;
 	struct btrfs_transaction *prev_trans = NULL;
-	struct btrfs_root *chunk_root = root->fs_info->chunk_root;
-	struct list_head dirty_fs_roots;
 	struct extent_io_tree *pinned_copy;
 	DEFINE_WAIT(wait);
 	int ret;
@@ -999,7 +883,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	BUG_ON(ret);
 
 	mutex_lock(&root->fs_info->trans_mutex);
-	INIT_LIST_HEAD(&dirty_fs_roots);
 	if (cur_trans->in_commit) {
 		cur_trans->use_count++;
 		mutex_unlock(&root->fs_info->trans_mutex);
@@ -1105,41 +988,36 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	 * with the tree-log code.
 	 */
 	mutex_lock(&root->fs_info->tree_log_mutex);
-	/*
-	 * keep tree reloc code from adding new reloc trees
-	 */
-	mutex_lock(&root->fs_info->tree_reloc_mutex);
-
 
-	ret = add_dirty_roots(trans, &root->fs_info->fs_roots_radix,
-			      &dirty_fs_roots);
+	ret = commit_fs_roots(trans, root);
 	BUG_ON(ret);
 
-	/* add_dirty_roots gets rid of all the tree log roots, it is now
+	/* commit_fs_roots gets rid of all the tree log roots, it is now
 	 * safe to free the root of tree log roots
 	 */
 	btrfs_free_log_root_tree(trans, root->fs_info);
 
-	ret = btrfs_commit_tree_roots(trans, root);
+	ret = commit_cowonly_roots(trans, root);
 	BUG_ON(ret);
 
 	cur_trans = root->fs_info->running_transaction;
 	spin_lock(&root->fs_info->new_trans_lock);
 	root->fs_info->running_transaction = NULL;
 	spin_unlock(&root->fs_info->new_trans_lock);
-	btrfs_set_super_generation(&root->fs_info->super_copy,
-				   cur_trans->transid);
-	btrfs_set_super_root(&root->fs_info->super_copy,
-			     root->fs_info->tree_root->node->start);
-	btrfs_set_super_root_level(&root->fs_info->super_copy,
-			   btrfs_header_level(root->fs_info->tree_root->node));
-
-	btrfs_set_super_chunk_root(&root->fs_info->super_copy,
-				   chunk_root->node->start);
-	btrfs_set_super_chunk_root_level(&root->fs_info->super_copy,
-					 btrfs_header_level(chunk_root->node));
-	btrfs_set_super_chunk_root_generation(&root->fs_info->super_copy,
-				btrfs_header_generation(chunk_root->node));
+
+	btrfs_set_root_node(&root->fs_info->tree_root->root_item,
+			    root->fs_info->tree_root->node);
+	free_extent_buffer(root->fs_info->tree_root->commit_root);
+	root->fs_info->tree_root->commit_root =
+				btrfs_root_node(root->fs_info->tree_root);
+
+	btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
+			    root->fs_info->chunk_root->node);
+	free_extent_buffer(root->fs_info->chunk_root->commit_root);
+	root->fs_info->chunk_root->commit_root =
+				btrfs_root_node(root->fs_info->chunk_root);
+
+	update_super_roots(root);
 
 	if (!root->fs_info->log_root_recovering) {
 		btrfs_set_super_log_root(&root->fs_info->super_copy, 0);
@@ -1153,7 +1031,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	trans->transaction->blocked = 0;
 
-	wake_up(&root->fs_info->transaction_throttle);
 	wake_up(&root->fs_info->transaction_wait);
 
 	mutex_unlock(&root->fs_info->trans_mutex);
@@ -1170,9 +1047,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	btrfs_finish_extent_commit(trans, root, pinned_copy);
 	kfree(pinned_copy);
 
-	btrfs_drop_dead_reloc_roots(root);
-	mutex_unlock(&root->fs_info->tree_reloc_mutex);
-
 	/* do the directory inserts of any pending snapshot creations */
 	finish_pending_snapshots(trans, root->fs_info);
 
@@ -1186,16 +1060,9 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	put_transaction(cur_trans);
 	put_transaction(cur_trans);
 
-	list_splice_init(&dirty_fs_roots, &root->fs_info->dead_roots);
-	if (root->fs_info->closing)
-		list_splice_init(&root->fs_info->dead_roots, &dirty_fs_roots);
-
 	mutex_unlock(&root->fs_info->trans_mutex);
 
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
-
-	if (root->fs_info->closing)
-		drop_dirty_roots(root->fs_info->tree_root, &dirty_fs_roots);
 	return ret;
 }
 
@@ -1204,16 +1071,17 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
  */
 int btrfs_clean_old_snapshots(struct btrfs_root *root)
 {
-	struct list_head dirty_roots;
-	INIT_LIST_HEAD(&dirty_roots);
-again:
-	mutex_lock(&root->fs_info->trans_mutex);
-	list_splice_init(&root->fs_info->dead_roots, &dirty_roots);
-	mutex_unlock(&root->fs_info->trans_mutex);
+	LIST_HEAD(list);
+	struct btrfs_fs_info *fs_info = root->fs_info;
+
+	mutex_lock(&fs_info->trans_mutex);
+	list_splice_init(&fs_info->dead_roots, &list);
+	mutex_unlock(&fs_info->trans_mutex);
 
-	if (!list_empty(&dirty_roots)) {
-		drop_dirty_roots(root, &dirty_roots);
-		goto again;
+	while (!list_empty(&list)) {
+		root = list_entry(list.next, struct btrfs_root, root_list);
+		list_del_init(&root->root_list);
+		btrfs_drop_dead_root(root);
 	}
 	return 0;
 }
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 94f5bde2b58..961c3ee5a2e 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -62,12 +62,6 @@ struct btrfs_pending_snapshot {
 	struct list_head list;
 };
 
-struct btrfs_dirty_root {
-	struct list_head list;
-	struct btrfs_root *root;
-	struct btrfs_root *latest_root;
-};
-
 static inline void btrfs_set_trans_block_group(struct btrfs_trans_handle *trans,
 					       struct inode *inode)
 {
@@ -100,7 +94,8 @@ int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
 int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
 			    struct btrfs_root *root);
 
-int btrfs_add_dead_root(struct btrfs_root *root, struct btrfs_root *latest);
+int btrfs_add_dead_root(struct btrfs_root *root);
+int btrfs_drop_dead_root(struct btrfs_root *root);
 int btrfs_defrag_root(struct btrfs_root *root, int cacheonly);
 int btrfs_clean_old_snapshots(struct btrfs_root *root);
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
@@ -108,7 +103,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root);
 void btrfs_throttle(struct btrfs_root *root);
-int btrfs_record_root_in_trans(struct btrfs_root *root);
+int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root);
 int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 					struct extent_io_tree *dirty_pages);
 #endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index db5e212e844..c13922206d1 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -430,18 +430,16 @@ no_copy:
 static noinline struct inode *read_one_inode(struct btrfs_root *root,
 					     u64 objectid)
 {
+	struct btrfs_key key;
 	struct inode *inode;
-	inode = btrfs_iget_locked(root->fs_info->sb, objectid, root);
-	if (inode->i_state & I_NEW) {
-		BTRFS_I(inode)->root = root;
-		BTRFS_I(inode)->location.objectid = objectid;
-		BTRFS_I(inode)->location.type = BTRFS_INODE_ITEM_KEY;
-		BTRFS_I(inode)->location.offset = 0;
-		btrfs_read_locked_inode(inode);
-		unlock_new_inode(inode);
 
-	}
-	if (is_bad_inode(inode)) {
+	key.objectid = objectid;
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.offset = 0;
+	inode = btrfs_iget(root->fs_info->sb, &key, root);
+	if (IS_ERR(inode)) {
+		inode = NULL;
+	} else if (is_bad_inode(inode)) {
 		iput(inode);
 		inode = NULL;
 	}
@@ -541,6 +539,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 
 	if (found_type == BTRFS_FILE_EXTENT_REG ||
 	    found_type == BTRFS_FILE_EXTENT_PREALLOC) {
+		u64 offset;
 		unsigned long dest_offset;
 		struct btrfs_key ins;
 
@@ -555,6 +554,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 		ins.objectid = btrfs_file_extent_disk_bytenr(eb, item);
 		ins.offset = btrfs_file_extent_disk_num_bytes(eb, item);
 		ins.type = BTRFS_EXTENT_ITEM_KEY;
+		offset = key->offset - btrfs_file_extent_offset(eb, item);
 
 		if (ins.objectid > 0) {
 			u64 csum_start;
@@ -569,19 +569,16 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 			if (ret == 0) {
 				ret = btrfs_inc_extent_ref(trans, root,
 						ins.objectid, ins.offset,
-						path->nodes[0]->start,
-						root->root_key.objectid,
-						trans->transid, key->objectid);
+						0, root->root_key.objectid,
+						key->objectid, offset);
 			} else {
 				/*
 				 * insert the extent pointer in the extent
 				 * allocation tree
 				 */
-				ret = btrfs_alloc_logged_extent(trans, root,
-						path->nodes[0]->start,
-						root->root_key.objectid,
-						trans->transid, key->objectid,
-						&ins);
+				ret = btrfs_alloc_logged_file_extent(trans,
+						root, root->root_key.objectid,
+						key->objectid, offset, &ins);
 				BUG_ON(ret);
 			}
 			btrfs_release_path(root, path);
@@ -1706,9 +1703,6 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans,
 				btrfs_wait_tree_block_writeback(next);
 				btrfs_tree_unlock(next);
 
-				ret = btrfs_drop_leaf_ref(trans, root, next);
-				BUG_ON(ret);
-
 				WARN_ON(root_owner !=
 					BTRFS_TREE_LOG_OBJECTID);
 				ret = btrfs_free_reserved_extent(root,
@@ -1753,10 +1747,6 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans,
 		btrfs_wait_tree_block_writeback(next);
 		btrfs_tree_unlock(next);
 
-		if (*level == 0) {
-			ret = btrfs_drop_leaf_ref(trans, root, next);
-			BUG_ON(ret);
-		}
 		WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
 		ret = btrfs_free_reserved_extent(root, bytenr, blocksize);
 		BUG_ON(ret);
@@ -1811,12 +1801,6 @@ static noinline int walk_up_log_tree(struct btrfs_trans_handle *trans,
 				btrfs_wait_tree_block_writeback(next);
 				btrfs_tree_unlock(next);
 
-				if (*level == 0) {
-					ret = btrfs_drop_leaf_ref(trans, root,
-								  next);
-					BUG_ON(ret);
-				}
-
 				WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
 				ret = btrfs_free_reserved_extent(root,
 						path->nodes[*level]->start,
@@ -1884,11 +1868,6 @@ static int walk_log_tree(struct btrfs_trans_handle *trans,
 			btrfs_wait_tree_block_writeback(next);
 			btrfs_tree_unlock(next);
 
-			if (orig_level == 0) {
-				ret = btrfs_drop_leaf_ref(trans, log,
-							  next);
-				BUG_ON(ret);
-			}
 			WARN_ON(log->root_key.objectid !=
 				BTRFS_TREE_LOG_OBJECTID);
 			ret = btrfs_free_reserved_extent(log, next->start,
@@ -2027,9 +2006,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 	ret = btrfs_write_and_wait_marked_extents(log, &log->dirty_log_pages);
 	BUG_ON(ret);
 
-	btrfs_set_root_bytenr(&log->root_item, log->node->start);
-	btrfs_set_root_generation(&log->root_item, trans->transid);
-	btrfs_set_root_level(&log->root_item, btrfs_header_level(log->node));
+	btrfs_set_root_node(&log->root_item, log->node);
 
 	root->log_batch = 0;
 	root->log_transid++;
@@ -2581,7 +2558,7 @@ static noinline int copy_items(struct btrfs_trans_handle *trans,
 				       ins_keys, ins_sizes, nr);
 	BUG_ON(ret);
 
-	for (i = 0; i < nr; i++) {
+	for (i = 0; i < nr; i++, dst_path->slots[0]++) {
 		dst_offset = btrfs_item_ptr_offset(dst_path->nodes[0],
 						   dst_path->slots[0]);
 
@@ -2617,36 +2594,31 @@ static noinline int copy_items(struct btrfs_trans_handle *trans,
 			found_type = btrfs_file_extent_type(src, extent);
 			if (found_type == BTRFS_FILE_EXTENT_REG ||
 			    found_type == BTRFS_FILE_EXTENT_PREALLOC) {
-				u64 ds = btrfs_file_extent_disk_bytenr(src,
-								   extent);
-				u64 dl = btrfs_file_extent_disk_num_bytes(src,
-								      extent);
-				u64 cs = btrfs_file_extent_offset(src, extent);
-				u64 cl = btrfs_file_extent_num_bytes(src,
-								     extent);;
+				u64 ds, dl, cs, cl;
+				ds = btrfs_file_extent_disk_bytenr(src,
+								extent);
+				/* ds == 0 is a hole */
+				if (ds == 0)
+					continue;
+
+				dl = btrfs_file_extent_disk_num_bytes(src,
+								extent);
+				cs = btrfs_file_extent_offset(src, extent);
+				cl = btrfs_file_extent_num_bytes(src,
+								extent);;
 				if (btrfs_file_extent_compression(src,
 								  extent)) {
 					cs = 0;
 					cl = dl;
 				}
-				/* ds == 0 is a hole */
-				if (ds != 0) {
-					ret = btrfs_inc_extent_ref(trans, log,
-						   ds, dl,
-						   dst_path->nodes[0]->start,
-						   BTRFS_TREE_LOG_OBJECTID,
-						   trans->transid,
-						   ins_keys[i].objectid);
-					BUG_ON(ret);
-					ret = btrfs_lookup_csums_range(
-						   log->fs_info->csum_root,
-						   ds + cs, ds + cs + cl - 1,
-						   &ordered_sums);
-					BUG_ON(ret);
-				}
+
+				ret = btrfs_lookup_csums_range(
+						log->fs_info->csum_root,
+						ds + cs, ds + cs + cl - 1,
+						&ordered_sums);
+				BUG_ON(ret);
 			}
 		}
-		dst_path->slots[0]++;
 	}
 
 	btrfs_mark_buffer_dirty(dst_path->nodes[0]);
@@ -3029,9 +3001,7 @@ again:
 		BUG_ON(!wc.replay_dest);
 
 		wc.replay_dest->log_root = log;
-		mutex_lock(&fs_info->trans_mutex);
-		btrfs_record_root_in_trans(wc.replay_dest);
-		mutex_unlock(&fs_info->trans_mutex);
+		btrfs_record_root_in_trans(trans, wc.replay_dest);
 		ret = walk_log_tree(trans, log, &wc);
 		BUG_ON(ret);
 
@@ -3049,6 +3019,7 @@ again:
 		key.offset = found_key.offset - 1;
 		wc.replay_dest->log_root = NULL;
 		free_extent_buffer(log->node);
+		free_extent_buffer(log->commit_root);
 		kfree(log);
 
 		if (found_key.offset == 0)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index a6d35b0054c..3ab80e9cd76 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -161,8 +161,10 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 	int again = 0;
 	unsigned long num_run;
 	unsigned long num_sync_run;
+	unsigned long batch_run = 0;
 	unsigned long limit;
 	unsigned long last_waited = 0;
+	int force_reg = 0;
 
 	bdi = blk_get_backing_dev_info(device->bdev);
 	fs_info = device->dev_root->fs_info;
@@ -176,19 +178,22 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 
 loop:
 	spin_lock(&device->io_lock);
-	num_run = 0;
 
 loop_lock:
+	num_run = 0;
 
 	/* take all the bios off the list at once and process them
 	 * later on (without the lock held).  But, remember the
 	 * tail and other pointers so the bios can be properly reinserted
 	 * into the list if we hit congestion
 	 */
-	if (device->pending_sync_bios.head)
+	if (!force_reg && device->pending_sync_bios.head) {
 		pending_bios = &device->pending_sync_bios;
-	else
+		force_reg = 1;
+	} else {
 		pending_bios = &device->pending_bios;
+		force_reg = 0;
+	}
 
 	pending = pending_bios->head;
 	tail = pending_bios->tail;
@@ -228,10 +233,14 @@ loop_lock:
 	while (pending) {
 
 		rmb();
-		if (pending_bios != &device->pending_sync_bios &&
-		    device->pending_sync_bios.head &&
-		    num_run > 16) {
-			cond_resched();
+		/* we want to work on both lists, but do more bios on the
+		 * sync list than the regular list
+		 */
+		if ((num_run > 32 &&
+		    pending_bios != &device->pending_sync_bios &&
+		    device->pending_sync_bios.head) ||
+		   (num_run > 64 && pending_bios == &device->pending_sync_bios &&
+		    device->pending_bios.head)) {
 			spin_lock(&device->io_lock);
 			requeue_list(pending_bios, pending, tail);
 			goto loop_lock;
@@ -249,6 +258,8 @@ loop_lock:
 		BUG_ON(atomic_read(&cur->bi_cnt) == 0);
 		submit_bio(cur->bi_rw, cur);
 		num_run++;
+		batch_run++;
+
 		if (bio_sync(cur))
 			num_sync_run++;
 
@@ -265,7 +276,7 @@ loop_lock:
 		 * is now congested.  Back off and let other work structs
 		 * run instead
 		 */
-		if (pending && bdi_write_congested(bdi) && num_run > 16 &&
+		if (pending && bdi_write_congested(bdi) && batch_run > 32 &&
 		    fs_info->fs_devices->open_devices > 1) {
 			struct io_context *ioc;
 
@@ -366,6 +377,7 @@ static noinline int device_list_add(const char *path,
 		memcpy(fs_devices->fsid, disk_super->fsid, BTRFS_FSID_SIZE);
 		fs_devices->latest_devid = devid;
 		fs_devices->latest_trans = found_transid;
+		mutex_init(&fs_devices->device_list_mutex);
 		device = NULL;
 	} else {
 		device = __find_device(&fs_devices->devices, devid,
@@ -392,7 +404,11 @@ static noinline int device_list_add(const char *path,
 			return -ENOMEM;
 		}
 		INIT_LIST_HEAD(&device->dev_alloc_list);
+
+		mutex_lock(&fs_devices->device_list_mutex);
 		list_add(&device->dev_list, &fs_devices->devices);
+		mutex_unlock(&fs_devices->device_list_mutex);
+
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
 	}
@@ -418,10 +434,12 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 	INIT_LIST_HEAD(&fs_devices->devices);
 	INIT_LIST_HEAD(&fs_devices->alloc_list);
 	INIT_LIST_HEAD(&fs_devices->list);
+	mutex_init(&fs_devices->device_list_mutex);
 	fs_devices->latest_devid = orig->latest_devid;
 	fs_devices->latest_trans = orig->latest_trans;
 	memcpy(fs_devices->fsid, orig->fsid, sizeof(fs_devices->fsid));
 
+	mutex_lock(&orig->device_list_mutex);
 	list_for_each_entry(orig_dev, &orig->devices, dev_list) {
 		device = kzalloc(sizeof(*device), GFP_NOFS);
 		if (!device)
@@ -443,8 +461,10 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
 	}
+	mutex_unlock(&orig->device_list_mutex);
 	return fs_devices;
 error:
+	mutex_unlock(&orig->device_list_mutex);
 	free_fs_devices(fs_devices);
 	return ERR_PTR(-ENOMEM);
 }
@@ -455,6 +475,7 @@ int btrfs_close_extra_devices(struct btrfs_fs_devices *fs_devices)
 
 	mutex_lock(&uuid_mutex);
 again:
+	mutex_lock(&fs_devices->device_list_mutex);
 	list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
 		if (device->in_fs_metadata)
 			continue;
@@ -474,6 +495,7 @@ again:
 		kfree(device->name);
 		kfree(device);
 	}
+	mutex_unlock(&fs_devices->device_list_mutex);
 
 	if (fs_devices->seed) {
 		fs_devices = fs_devices->seed;
@@ -594,6 +616,9 @@ static int __btrfs_open_devices(struct btrfs_fs_devices *fs_devices,
 		device->in_fs_metadata = 0;
 		device->mode = flags;
 
+		if (!blk_queue_nonrot(bdev_get_queue(bdev)))
+			fs_devices->rotating = 1;
+
 		fs_devices->open_devices++;
 		if (device->writeable) {
 			fs_devices->rw_devices++;
@@ -1121,12 +1146,14 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path)
 
 		device = NULL;
 		devices = &root->fs_info->fs_devices->devices;
+		mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 		list_for_each_entry(tmp, devices, dev_list) {
 			if (tmp->in_fs_metadata && !tmp->bdev) {
 				device = tmp;
 				break;
 			}
 		}
+		mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 		bdev = NULL;
 		bh = NULL;
 		disk_super = NULL;
@@ -1181,7 +1208,16 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path)
 		goto error_brelse;
 
 	device->in_fs_metadata = 0;
+
+	/*
+	 * the device list mutex makes sure that we don't change
+	 * the device list while someone else is writing out all
+	 * the device supers.
+	 */
+	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 	list_del_init(&device->dev_list);
+	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
+
 	device->fs_devices->num_devices--;
 
 	next_device = list_entry(root->fs_info->fs_devices->devices.next,
@@ -1275,6 +1311,7 @@ static int btrfs_prepare_sprout(struct btrfs_trans_handle *trans,
 	seed_devices->opened = 1;
 	INIT_LIST_HEAD(&seed_devices->devices);
 	INIT_LIST_HEAD(&seed_devices->alloc_list);
+	mutex_init(&seed_devices->device_list_mutex);
 	list_splice_init(&fs_devices->devices, &seed_devices->devices);
 	list_splice_init(&fs_devices->alloc_list, &seed_devices->alloc_list);
 	list_for_each_entry(device, &seed_devices->devices, dev_list) {
@@ -1400,6 +1437,10 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	mutex_lock(&root->fs_info->volume_mutex);
 
 	devices = &root->fs_info->fs_devices->devices;
+	/*
+	 * we have the volume lock, so we don't need the extra
+	 * device list mutex while reading the list here.
+	 */
 	list_for_each_entry(device, devices, dev_list) {
 		if (device->bdev == bdev) {
 			ret = -EEXIST;
@@ -1454,6 +1495,12 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	}
 
 	device->fs_devices = root->fs_info->fs_devices;
+
+	/*
+	 * we don't want write_supers to jump in here with our device
+	 * half setup
+	 */
+	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 	list_add(&device->dev_list, &root->fs_info->fs_devices->devices);
 	list_add(&device->dev_alloc_list,
 		 &root->fs_info->fs_devices->alloc_list);
@@ -1462,6 +1509,9 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	root->fs_info->fs_devices->rw_devices++;
 	root->fs_info->fs_devices->total_rw_bytes += device->total_bytes;
 
+	if (!blk_queue_nonrot(bdev_get_queue(bdev)))
+		root->fs_info->fs_devices->rotating = 1;
+
 	total_bytes = btrfs_super_total_bytes(&root->fs_info->super_copy);
 	btrfs_set_super_total_bytes(&root->fs_info->super_copy,
 				    total_bytes + device->total_bytes);
@@ -1469,6 +1519,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	total_bytes = btrfs_super_num_devices(&root->fs_info->super_copy);
 	btrfs_set_super_num_devices(&root->fs_info->super_copy,
 				    total_bytes + 1);
+	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 
 	if (seeding_dev) {
 		ret = init_first_rw_device(trans, root, device);
@@ -1671,8 +1722,6 @@ static int btrfs_relocate_chunk(struct btrfs_root *root,
 	int ret;
 	int i;
 
-	printk(KERN_INFO "btrfs relocating chunk %llu\n",
-	       (unsigned long long)chunk_offset);
 	root = root->fs_info->chunk_root;
 	extent_root = root->fs_info->extent_root;
 	em_tree = &root->fs_info->mapping_tree.map_tree;
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 5c3ff6d02fd..5139a833f72 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -96,7 +96,12 @@ struct btrfs_fs_devices {
 	u64 rw_devices;
 	u64 total_rw_bytes;
 	struct block_device *latest_bdev;
-	/* all of the devices in the FS */
+
+	/* all of the devices in the FS, protected by a mutex
+	 * so we can safely walk it to write out the supers without
+	 * worrying about add/remove by the multi-device code
+	 */
+	struct mutex device_list_mutex;
 	struct list_head devices;
 
 	/* devices not currently being allocated */
@@ -107,6 +112,11 @@ struct btrfs_fs_devices {
 	int seeding;
 
 	int opened;
+
+	/* set when we find or add a device that doesn't have the
+	 * nonrot flag set
+	 */
+	int rotating;
 };
 
 struct btrfs_bio_stripe {
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 1e962348d11..431accd475a 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -354,7 +354,9 @@ static void cachefiles_sync_cache(struct fscache_cache *_cache)
 	/* make sure all pages pinned by operations on behalf of the netfs are
 	 * written to disc */
 	cachefiles_begin_secure(cache, &saved_cred);
-	ret = fsync_super(cache->mnt->mnt_sb);
+	down_read(&cache->mnt->mnt_sb->s_umount);
+	ret = sync_filesystem(cache->mnt->mnt_sb);
+	up_read(&cache->mnt->mnt_sb->s_umount);
 	cachefiles_end_secure(cache, saved_cred);
 
 	if (ret == -EIO)
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 38f71222a55..b7c9d5187a7 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -375,7 +375,6 @@ static int chrdev_open(struct inode *inode, struct file *filp)
 		p = inode->i_cdev;
 		if (!p) {
 			inode->i_cdev = p = new;
-			inode->i_cindex = idx;
 			list_add(&inode->i_devices, &p->list);
 			new = NULL;
 		} else if (!cdev_get(p))
@@ -405,6 +404,18 @@ static int chrdev_open(struct inode *inode, struct file *filp)
 	return ret;
 }
 
+int cdev_index(struct inode *inode)
+{
+	int idx;
+	struct kobject *kobj;
+
+	kobj = kobj_lookup(cdev_map, inode->i_rdev, &idx);
+	if (!kobj)
+		return -1;
+	kobject_put(kobj);
+	return idx;
+}
+
 void cd_forget(struct inode *inode)
 {
 	spin_lock(&cdev_lock);
@@ -557,6 +568,7 @@ EXPORT_SYMBOL(cdev_init);
 EXPORT_SYMBOL(cdev_alloc);
 EXPORT_SYMBOL(cdev_del);
 EXPORT_SYMBOL(cdev_add);
+EXPORT_SYMBOL(cdev_index);
 EXPORT_SYMBOL(register_chrdev);
 EXPORT_SYMBOL(unregister_chrdev);
 EXPORT_SYMBOL(directly_mappable_cdev_bdi);
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 83d62759c7c..3bb11be8b6a 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -275,7 +275,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
 	case -EBUSY:
 		/* someone else made a mount here whilst we were busy */
 		while (d_mountpoint(nd->path.dentry) &&
-		       follow_down(&nd->path.mnt, &nd->path.dentry))
+		       follow_down(&nd->path))
 			;
 		err = 0;
 	default:
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0a10a59b639..0d92114195a 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -204,6 +204,9 @@ cifs_put_super(struct super_block *sb)
 		cFYI(1, ("Empty cifs superblock info passed to unmount"));
 		return;
 	}
+
+	lock_kernel();
+
 	rc = cifs_umount(sb, cifs_sb);
 	if (rc)
 		cERROR(1, ("cifs_umount failed with return code %d", rc));
@@ -216,7 +219,8 @@ cifs_put_super(struct super_block *sb)
 
 	unload_nls(cifs_sb->local_nls);
 	kfree(cifs_sb);
-	return;
+
+	unlock_kernel();
 }
 
 static int
diff --git a/fs/compat.c b/fs/compat.c
index bb2a9b2e817..cdd51a3a7c5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -471,7 +471,7 @@ asmlinkage long compat_sys_fcntl64(unsigned int fd, unsigned int cmd,
 		ret = sys_fcntl(fd, cmd, (unsigned long)&f);
 		set_fs(old_fs);
 		if (cmd == F_GETLK && ret == 0) {
-			/* GETLK was successfule and we need to return the data...
+			/* GETLK was successful and we need to return the data...
 			 * but it needs to fit in the compat structure.
 			 * l_start shouldn't be too big, unless the original
 			 * start + end is greater than COMPAT_OFF_T_MAX, in which
@@ -812,10 +812,8 @@ asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name,
 		}
 	}
 
-	lock_kernel();
 	retval = do_mount((char*)dev_page, dir_page, (char*)type_page,
 			flags, (void*)data_page);
-	unlock_kernel();
 
  out4:
 	free_page(data_page);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index b83f6bcfa51..0aac371bff0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1765,7 +1765,7 @@ static int do_i2c_smbus_ioctl(unsigned int fd, unsigned int cmd, unsigned long a
 
 /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
  * for some operations; this forces use of the newer bridge-utils that
- * use compatiable ioctls
+ * use compatible ioctls
  */
 static int old_bridge_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
 {
diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h
index 762d287123c..da6061a6df4 100644
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -39,6 +39,9 @@ struct configfs_dirent {
 	umode_t			s_mode;
 	struct dentry		* s_dentry;
 	struct iattr		* s_iattr;
+#ifdef CONFIG_LOCKDEP
+	int			s_depth;
+#endif
 };
 
 #define CONFIGFS_ROOT		0x0001
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 05373db21a4..8e48b52205a 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -78,11 +78,97 @@ static const struct dentry_operations configfs_dentry_ops = {
 	.d_delete	= configfs_d_delete,
 };
 
+#ifdef CONFIG_LOCKDEP
+
+/*
+ * Helpers to make lockdep happy with our recursive locking of default groups'
+ * inodes (see configfs_attach_group() and configfs_detach_group()).
+ * We put default groups i_mutexes in separate classes according to their depth
+ * from the youngest non-default group ancestor.
+ *
+ * For a non-default group A having default groups A/B, A/C, and A/C/D, default
+ * groups A/B and A/C will have their inode's mutex in class
+ * default_group_class[0], and default group A/C/D will be in
+ * default_group_class[1].
+ *
+ * The lock classes are declared and assigned in inode.c, according to the
+ * s_depth value.
+ * The s_depth value is initialized to -1, adjusted to >= 0 when attaching
+ * default groups, and reset to -1 when all default groups are attached. During
+ * attachment, if configfs_create() sees s_depth > 0, the lock class of the new
+ * inode's mutex is set to default_group_class[s_depth - 1].
+ */
+
+static void configfs_init_dirent_depth(struct configfs_dirent *sd)
+{
+	sd->s_depth = -1;
+}
+
+static void configfs_set_dir_dirent_depth(struct configfs_dirent *parent_sd,
+					  struct configfs_dirent *sd)
+{
+	int parent_depth = parent_sd->s_depth;
+
+	if (parent_depth >= 0)
+		sd->s_depth = parent_depth + 1;
+}
+
+static void
+configfs_adjust_dir_dirent_depth_before_populate(struct configfs_dirent *sd)
+{
+	/*
+	 * item's i_mutex class is already setup, so s_depth is now only
+	 * used to set new sub-directories s_depth, which is always done
+	 * with item's i_mutex locked.
+	 */
+	/*
+	 *  sd->s_depth == -1 iff we are a non default group.
+	 *  else (we are a default group) sd->s_depth > 0 (see
+	 *  create_dir()).
+	 */
+	if (sd->s_depth == -1)
+		/*
+		 * We are a non default group and we are going to create
+		 * default groups.
+		 */
+		sd->s_depth = 0;
+}
+
+static void
+configfs_adjust_dir_dirent_depth_after_populate(struct configfs_dirent *sd)
+{
+	/* We will not create default groups anymore. */
+	sd->s_depth = -1;
+}
+
+#else /* CONFIG_LOCKDEP */
+
+static void configfs_init_dirent_depth(struct configfs_dirent *sd)
+{
+}
+
+static void configfs_set_dir_dirent_depth(struct configfs_dirent *parent_sd,
+					  struct configfs_dirent *sd)
+{
+}
+
+static void
+configfs_adjust_dir_dirent_depth_before_populate(struct configfs_dirent *sd)
+{
+}
+
+static void
+configfs_adjust_dir_dirent_depth_after_populate(struct configfs_dirent *sd)
+{
+}
+
+#endif /* CONFIG_LOCKDEP */
+
 /*
  * Allocates a new configfs_dirent and links it to the parent configfs_dirent
  */
-static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * parent_sd,
-						void * element)
+static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent *parent_sd,
+						   void *element, int type)
 {
 	struct configfs_dirent * sd;
 
@@ -94,6 +180,8 @@ static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * pare
 	INIT_LIST_HEAD(&sd->s_links);
 	INIT_LIST_HEAD(&sd->s_children);
 	sd->s_element = element;
+	sd->s_type = type;
+	configfs_init_dirent_depth(sd);
 	spin_lock(&configfs_dirent_lock);
 	if (parent_sd->s_type & CONFIGFS_USET_DROPPING) {
 		spin_unlock(&configfs_dirent_lock);
@@ -138,12 +226,11 @@ int configfs_make_dirent(struct configfs_dirent * parent_sd,
 {
 	struct configfs_dirent * sd;
 
-	sd = configfs_new_dirent(parent_sd, element);
+	sd = configfs_new_dirent(parent_sd, element, type);
 	if (IS_ERR(sd))
 		return PTR_ERR(sd);
 
 	sd->s_mode = mode;
-	sd->s_type = type;
 	sd->s_dentry = dentry;
 	if (dentry) {
 		dentry->d_fsdata = configfs_get(sd);
@@ -187,6 +274,7 @@ static int create_dir(struct config_item * k, struct dentry * p,
 		error = configfs_make_dirent(p->d_fsdata, d, k, mode,
 					     CONFIGFS_DIR | CONFIGFS_USET_CREATING);
 	if (!error) {
+		configfs_set_dir_dirent_depth(p->d_fsdata, d->d_fsdata);
 		error = configfs_create(d, mode, init_dir);
 		if (!error) {
 			inc_nlink(p->d_inode);
@@ -789,11 +877,13 @@ static int configfs_attach_group(struct config_item *parent_item,
 		 * error, as rmdir() would.
 		 */
 		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+		configfs_adjust_dir_dirent_depth_before_populate(sd);
 		ret = populate_groups(to_config_group(item));
 		if (ret) {
 			configfs_detach_item(item);
 			dentry->d_inode->i_flags |= S_DEAD;
 		}
+		configfs_adjust_dir_dirent_depth_after_populate(sd);
 		mutex_unlock(&dentry->d_inode->i_mutex);
 		if (ret)
 			d_delete(dentry);
@@ -916,11 +1006,11 @@ static int configfs_dump(struct configfs_dirent *sd, int level)
  * Note, btw, that this can be called at *any* time, even when a configfs
  * subsystem isn't registered, or when configfs is loading or unloading.
  * Just like configfs_register_subsystem().  So we take the same
- * precautions.  We pin the filesystem.  We lock each i_mutex _in_order_
- * on our way down the tree.  If we can find the target item in the
+ * precautions.  We pin the filesystem.  We lock configfs_dirent_lock.
+ * If we can find the target item in the
  * configfs tree, it must be part of the subsystem tree as well, so we
- * do not need the subsystem semaphore.  Holding the i_mutex chain locks
- * out mkdir() and rmdir(), who might be racing us.
+ * do not need the subsystem semaphore.  Holding configfs_dirent_lock helps
+ * locking out mkdir() and rmdir(), who might be racing us.
  */
 
 /*
@@ -933,17 +1023,21 @@ static int configfs_dump(struct configfs_dirent *sd, int level)
  * do that so we can unlock it if we find nothing.
  *
  * Here we do a depth-first search of the dentry hierarchy looking for
- * our object.  We take i_mutex on each step of the way down.  IT IS
- * ESSENTIAL THAT i_mutex LOCKING IS ORDERED.  If we come back up a branch,
- * we'll drop the i_mutex.
+ * our object.
+ * We deliberately ignore items tagged as dropping since they are virtually
+ * dead, as well as items in the middle of attachment since they virtually
+ * do not exist yet. This completes the locking out of racing mkdir() and
+ * rmdir().
+ * Note: subdirectories in the middle of attachment start with s_type =
+ * CONFIGFS_DIR|CONFIGFS_USET_CREATING set by create_dir().  When
+ * CONFIGFS_USET_CREATING is set, we ignore the item.  The actual set of
+ * s_type is in configfs_new_dirent(), which has configfs_dirent_lock.
  *
- * If the target is not found, -ENOENT is bubbled up and we have released
- * all locks.  If the target was found, the locks will be cleared by
- * configfs_depend_rollback().
+ * If the target is not found, -ENOENT is bubbled up.
  *
  * This adds a requirement that all config_items be unique!
  *
- * This is recursive because the locking traversal is tricky.  There isn't
+ * This is recursive.  There isn't
  * much on the stack, though, so folks that need this function - be careful
  * about your stack!  Patches will be accepted to make it iterative.
  */
@@ -955,13 +1049,13 @@ static int configfs_depend_prep(struct dentry *origin,
 
 	BUG_ON(!origin || !sd);
 
-	/* Lock this guy on the way down */
-	mutex_lock(&sd->s_dentry->d_inode->i_mutex);
 	if (sd->s_element == target)  /* Boo-yah */
 		goto out;
 
 	list_for_each_entry(child_sd, &sd->s_children, s_sibling) {
-		if (child_sd->s_type & CONFIGFS_DIR) {
+		if ((child_sd->s_type & CONFIGFS_DIR) &&
+		    !(child_sd->s_type & CONFIGFS_USET_DROPPING) &&
+		    !(child_sd->s_type & CONFIGFS_USET_CREATING)) {
 			ret = configfs_depend_prep(child_sd->s_dentry,
 						   target);
 			if (!ret)
@@ -970,33 +1064,12 @@ static int configfs_depend_prep(struct dentry *origin,
 	}
 
 	/* We looped all our children and didn't find target */
-	mutex_unlock(&sd->s_dentry->d_inode->i_mutex);
 	ret = -ENOENT;
 
 out:
 	return ret;
 }
 
-/*
- * This is ONLY called if configfs_depend_prep() did its job.  So we can
- * trust the entire path from item back up to origin.
- *
- * We walk backwards from item, unlocking each i_mutex.  We finish by
- * unlocking origin.
- */
-static void configfs_depend_rollback(struct dentry *origin,
-				     struct config_item *item)
-{
-	struct dentry *dentry = item->ci_dentry;
-
-	while (dentry != origin) {
-		mutex_unlock(&dentry->d_inode->i_mutex);
-		dentry = dentry->d_parent;
-	}
-
-	mutex_unlock(&origin->d_inode->i_mutex);
-}
-
 int configfs_depend_item(struct configfs_subsystem *subsys,
 			 struct config_item *target)
 {
@@ -1037,17 +1110,21 @@ int configfs_depend_item(struct configfs_subsystem *subsys,
 
 	/* Ok, now we can trust subsys/s_item */
 
-	/* Scan the tree, locking i_mutex recursively, return 0 if found */
+	spin_lock(&configfs_dirent_lock);
+	/* Scan the tree, return 0 if found */
 	ret = configfs_depend_prep(subsys_sd->s_dentry, target);
 	if (ret)
-		goto out_unlock_fs;
+		goto out_unlock_dirent_lock;
 
-	/* We hold all i_mutexes from the subsystem down to the target */
+	/*
+	 * We are sure that the item is not about to be removed by rmdir(), and
+	 * not in the middle of attachment by mkdir().
+	 */
 	p = target->ci_dentry->d_fsdata;
 	p->s_dependent_count += 1;
 
-	configfs_depend_rollback(subsys_sd->s_dentry, target);
-
+out_unlock_dirent_lock:
+	spin_unlock(&configfs_dirent_lock);
 out_unlock_fs:
 	mutex_unlock(&configfs_sb->s_root->d_inode->i_mutex);
 
@@ -1072,10 +1149,10 @@ void configfs_undepend_item(struct configfs_subsystem *subsys,
 	struct configfs_dirent *sd;
 
 	/*
-	 * Since we can trust everything is pinned, we just need i_mutex
-	 * on the item.
+	 * Since we can trust everything is pinned, we just need
+	 * configfs_dirent_lock.
 	 */
-	mutex_lock(&target->ci_dentry->d_inode->i_mutex);
+	spin_lock(&configfs_dirent_lock);
 
 	sd = target->ci_dentry->d_fsdata;
 	BUG_ON(sd->s_dependent_count < 1);
@@ -1086,7 +1163,7 @@ void configfs_undepend_item(struct configfs_subsystem *subsys,
 	 * After this unlock, we cannot trust the item to stay alive!
 	 * DO NOT REFERENCE item after this unlock.
 	 */
-	mutex_unlock(&target->ci_dentry->d_inode->i_mutex);
+	spin_unlock(&configfs_dirent_lock);
 }
 EXPORT_SYMBOL(configfs_undepend_item);
 
@@ -1286,13 +1363,6 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	if (sd->s_type & CONFIGFS_USET_DEFAULT)
 		return -EPERM;
 
-	/*
-	 * Here's where we check for dependents.  We're protected by
-	 * i_mutex.
-	 */
-	if (sd->s_dependent_count)
-		return -EBUSY;
-
 	/* Get a working ref until we have the child */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	subsys = to_config_group(parent_item)->cg_subsys;
@@ -1316,9 +1386,17 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 
 		mutex_lock(&configfs_symlink_mutex);
 		spin_lock(&configfs_dirent_lock);
-		ret = configfs_detach_prep(dentry, &wait_mutex);
-		if (ret)
-			configfs_detach_rollback(dentry);
+		/*
+		 * Here's where we check for dependents.  We're protected by
+		 * configfs_dirent_lock.
+		 * If no dependent, atomically tag the item as dropping.
+		 */
+		ret = sd->s_dependent_count ? -EBUSY : 0;
+		if (!ret) {
+			ret = configfs_detach_prep(dentry, &wait_mutex);
+			if (ret)
+				configfs_detach_rollback(dentry);
+		}
 		spin_unlock(&configfs_dirent_lock);
 		mutex_unlock(&configfs_symlink_mutex);
 
@@ -1429,7 +1507,7 @@ static int configfs_dir_open(struct inode *inode, struct file *file)
 	 */
 	err = -ENOENT;
 	if (configfs_dirent_is_ready(parent_sd)) {
-		file->private_data = configfs_new_dirent(parent_sd, NULL);
+		file->private_data = configfs_new_dirent(parent_sd, NULL, 0);
 		if (IS_ERR(file->private_data))
 			err = PTR_ERR(file->private_data);
 		else
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 5d349d38e05..4921e7426d9 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -33,10 +33,15 @@
 #include <linux/backing-dev.h>
 #include <linux/capability.h>
 #include <linux/sched.h>
+#include <linux/lockdep.h>
 
 #include <linux/configfs.h>
 #include "configfs_internal.h"
 
+#ifdef CONFIG_LOCKDEP
+static struct lock_class_key default_group_class[MAX_LOCK_DEPTH];
+#endif
+
 extern struct super_block * configfs_sb;
 
 static const struct address_space_operations configfs_aops = {
@@ -150,6 +155,38 @@ struct inode * configfs_new_inode(mode_t mode, struct configfs_dirent * sd)
 	return inode;
 }
 
+#ifdef CONFIG_LOCKDEP
+
+static void configfs_set_inode_lock_class(struct configfs_dirent *sd,
+					  struct inode *inode)
+{
+	int depth = sd->s_depth;
+
+	if (depth > 0) {
+		if (depth <= ARRAY_SIZE(default_group_class)) {
+			lockdep_set_class(&inode->i_mutex,
+					  &default_group_class[depth - 1]);
+		} else {
+			/*
+			 * In practice the maximum level of locking depth is
+			 * already reached. Just inform about possible reasons.
+			 */
+			printk(KERN_INFO "configfs: Too many levels of inodes"
+			       " for the locking correctness validator.\n");
+			printk(KERN_INFO "Spurious warnings may appear.\n");
+		}
+	}
+}
+
+#else /* CONFIG_LOCKDEP */
+
+static void configfs_set_inode_lock_class(struct configfs_dirent *sd,
+					  struct inode *inode)
+{
+}
+
+#endif /* CONFIG_LOCKDEP */
+
 int configfs_create(struct dentry * dentry, int mode, int (*init)(struct inode *))
 {
 	int error = 0;
@@ -162,6 +199,7 @@ int configfs_create(struct dentry * dentry, int mode, int (*init)(struct inode *
 					struct inode *p_inode = dentry->d_parent->d_inode;
 					p_inode->i_mtime = p_inode->i_ctime = CURRENT_TIME;
 				}
+				configfs_set_inode_lock_class(sd, inode);
 				goto Proceed;
 			}
 			else
diff --git a/fs/dcache.c b/fs/dcache.c
index 75659a6fd1f..9e5cd3c3a6b 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1910,7 +1910,7 @@ char *__d_path(const struct path *path, struct path *root,
 
 	spin_lock(&vfsmount_lock);
 	prepend(&end, &buflen, "\0", 1);
-	if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
+	if (d_unlinked(dentry) &&
 		(prepend(&end, &buflen, " (deleted)", 10) != 0))
 			goto Elong;
 
@@ -2035,7 +2035,7 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen)
 
 	spin_lock(&dcache_lock);
 	prepend(&end, &buflen, "\0", 1);
-	if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
+	if (d_unlinked(dentry) &&
 		(prepend(&end, &buflen, "//deleted", 9) != 0))
 			goto Elong;
 	if (buflen < 1)
@@ -2097,9 +2097,8 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 	read_unlock(&current->fs->lock);
 
 	error = -ENOENT;
-	/* Has the current directory has been unlinked? */
 	spin_lock(&dcache_lock);
-	if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) {
+	if (!d_unlinked(pwd.dentry)) {
 		unsigned long len;
 		struct path tmp = root;
 		char * cwd;
diff --git a/fs/dlm/dir.c b/fs/dlm/dir.c
index 858fba14aaa..c4dfa1dcc86 100644
--- a/fs/dlm/dir.c
+++ b/fs/dlm/dir.c
@@ -49,7 +49,8 @@ static struct dlm_direntry *get_free_de(struct dlm_ls *ls, int len)
 	spin_unlock(&ls->ls_recover_list_lock);
 
 	if (!found)
-		de = kzalloc(sizeof(struct dlm_direntry) + len, GFP_KERNEL);
+		de = kzalloc(sizeof(struct dlm_direntry) + len,
+			     ls->ls_allocation);
 	return de;
 }
 
@@ -211,7 +212,7 @@ int dlm_recover_directory(struct dlm_ls *ls)
 
 	dlm_dir_clear(ls);
 
-	last_name = kmalloc(DLM_RESNAME_MAXLEN, GFP_KERNEL);
+	last_name = kmalloc(DLM_RESNAME_MAXLEN, ls->ls_allocation);
 	if (!last_name)
 		goto out;
 
@@ -322,7 +323,7 @@ static int get_entry(struct dlm_ls *ls, int nodeid, char *name,
 	if (namelen > DLM_RESNAME_MAXLEN)
 		return -EINVAL;
 
-	de = kzalloc(sizeof(struct dlm_direntry) + namelen, GFP_KERNEL);
+	de = kzalloc(sizeof(struct dlm_direntry) + namelen, ls->ls_allocation);
 	if (!de)
 		return -ENOMEM;
 
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index cd8e2df3c29..d489fcc8671 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -384,7 +384,7 @@ static void threads_stop(void)
 	dlm_astd_stop();
 }
 
-static int new_lockspace(char *name, int namelen, void **lockspace,
+static int new_lockspace(const char *name, int namelen, void **lockspace,
 			 uint32_t flags, int lvblen)
 {
 	struct dlm_ls *ls;
@@ -419,16 +419,14 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 			break;
 		}
 		ls->ls_create_count++;
-		module_put(THIS_MODULE);
-		error = 1; /* not an error, return 0 */
+		*lockspace = ls;
+		error = 1;
 		break;
 	}
 	spin_unlock(&lslist_lock);
 
-	if (error < 0)
-		goto out;
 	if (error)
-		goto ret_zero;
+		goto out;
 
 	error = -ENOMEM;
 
@@ -583,7 +581,6 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 	dlm_create_debug_file(ls);
 
 	log_debug(ls, "join complete");
- ret_zero:
 	*lockspace = ls;
 	return 0;
 
@@ -614,7 +611,7 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 	return error;
 }
 
-int dlm_new_lockspace(char *name, int namelen, void **lockspace,
+int dlm_new_lockspace(const char *name, int namelen, void **lockspace,
 		      uint32_t flags, int lvblen)
 {
 	int error = 0;
@@ -628,7 +625,9 @@ int dlm_new_lockspace(char *name, int namelen, void **lockspace,
 	error = new_lockspace(name, namelen, lockspace, flags, lvblen);
 	if (!error)
 		ls_count++;
-	else if (!ls_count)
+	if (error > 0)
+		error = 0;
+	if (!ls_count)
 		threads_stop();
  out:
 	mutex_unlock(&ls_lock);
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 609108a8326..cdb580a9c7a 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -309,6 +309,20 @@ static void lowcomms_state_change(struct sock *sk)
 		lowcomms_write_space(sk);
 }
 
+int dlm_lowcomms_connect_node(int nodeid)
+{
+	struct connection *con;
+
+	if (nodeid == dlm_our_nodeid())
+		return 0;
+
+	con = nodeid2con(nodeid, GFP_NOFS);
+	if (!con)
+		return -ENOMEM;
+	lowcomms_connect_sock(con);
+	return 0;
+}
+
 /* Make a socket active */
 static int add_sock(struct socket *sock, struct connection *con)
 {
@@ -486,7 +500,7 @@ static void process_sctp_notification(struct connection *con,
 				return;
 			}
 
-			new_con = nodeid2con(nodeid, GFP_KERNEL);
+			new_con = nodeid2con(nodeid, GFP_NOFS);
 			if (!new_con)
 				return;
 
@@ -722,7 +736,7 @@ static int tcp_accept_from_sock(struct connection *con)
 	 *  the same time and the connections cross on the wire.
 	 *  In this case we store the incoming one in "othercon"
 	 */
-	newcon = nodeid2con(nodeid, GFP_KERNEL);
+	newcon = nodeid2con(nodeid, GFP_NOFS);
 	if (!newcon) {
 		result = -ENOMEM;
 		goto accept_err;
@@ -732,7 +746,7 @@ static int tcp_accept_from_sock(struct connection *con)
 		struct connection *othercon = newcon->othercon;
 
 		if (!othercon) {
-			othercon = kmem_cache_zalloc(con_cache, GFP_KERNEL);
+			othercon = kmem_cache_zalloc(con_cache, GFP_NOFS);
 			if (!othercon) {
 				log_print("failed to allocate incoming socket");
 				mutex_unlock(&newcon->sock_mutex);
@@ -1421,7 +1435,7 @@ static int work_start(void)
 static void stop_conn(struct connection *con)
 {
 	con->flags |= 0x0F;
-	if (con->sock)
+	if (con->sock && con->sock->sk)
 		con->sock->sk->sk_user_data = NULL;
 }
 
diff --git a/fs/dlm/lowcomms.h b/fs/dlm/lowcomms.h
index a9a9618c0d3..1311e642628 100644
--- a/fs/dlm/lowcomms.h
+++ b/fs/dlm/lowcomms.h
@@ -2,7 +2,7 @@
 *******************************************************************************
 **
 **  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2005 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2004-2009 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -19,6 +19,7 @@ void dlm_lowcomms_stop(void);
 int dlm_lowcomms_close(int nodeid);
 void *dlm_lowcomms_get_buffer(int nodeid, int len, gfp_t allocation, char **ppc);
 void dlm_lowcomms_commit_buffer(void *mh);
+int dlm_lowcomms_connect_node(int nodeid);
 
 #endif				/* __LOWCOMMS_DOT_H__ */
 
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 26133f05ae3..b128775913b 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -1,7 +1,7 @@
 /******************************************************************************
 *******************************************************************************
 **
-**  Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2005-2009 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -17,6 +17,7 @@
 #include "recover.h"
 #include "rcom.h"
 #include "config.h"
+#include "lowcomms.h"
 
 static void add_ordered_member(struct dlm_ls *ls, struct dlm_member *new)
 {
@@ -45,9 +46,9 @@ static void add_ordered_member(struct dlm_ls *ls, struct dlm_member *new)
 static int dlm_add_member(struct dlm_ls *ls, int nodeid)
 {
 	struct dlm_member *memb;
-	int w;
+	int w, error;
 
-	memb = kzalloc(sizeof(struct dlm_member), GFP_KERNEL);
+	memb = kzalloc(sizeof(struct dlm_member), ls->ls_allocation);
 	if (!memb)
 		return -ENOMEM;
 
@@ -57,6 +58,12 @@ static int dlm_add_member(struct dlm_ls *ls, int nodeid)
 		return w;
 	}
 
+	error = dlm_lowcomms_connect_node(nodeid);
+	if (error < 0) {
+		kfree(memb);
+		return error;
+	}
+
 	memb->nodeid = nodeid;
 	memb->weight = w;
 	add_ordered_member(ls, memb);
@@ -136,7 +143,7 @@ static void make_member_array(struct dlm_ls *ls)
 
 	ls->ls_total_weight = total;
 
-	array = kmalloc(sizeof(int) * total, GFP_KERNEL);
+	array = kmalloc(sizeof(int) * total, ls->ls_allocation);
 	if (!array)
 		return;
 
@@ -219,7 +226,7 @@ int dlm_recover_members(struct dlm_ls *ls, struct dlm_recover *rv, int *neg_out)
 			continue;
 		log_debug(ls, "new nodeid %d is a re-added member", rv->new[i]);
 
-		memb = kzalloc(sizeof(struct dlm_member), GFP_KERNEL);
+		memb = kzalloc(sizeof(struct dlm_member), ls->ls_allocation);
 		if (!memb)
 			return -ENOMEM;
 		memb->nodeid = rv->new[i];
@@ -334,7 +341,7 @@ int dlm_ls_start(struct dlm_ls *ls)
 	int *ids = NULL, *new = NULL;
 	int error, ids_count = 0, new_count = 0;
 
-	rv = kzalloc(sizeof(struct dlm_recover), GFP_KERNEL);
+	rv = kzalloc(sizeof(struct dlm_recover), ls->ls_allocation);
 	if (!rv)
 		return -ENOMEM;
 
diff --git a/fs/dlm/requestqueue.c b/fs/dlm/requestqueue.c
index daa4183fbb8..7a2307c0891 100644
--- a/fs/dlm/requestqueue.c
+++ b/fs/dlm/requestqueue.c
@@ -35,7 +35,7 @@ void dlm_add_requestqueue(struct dlm_ls *ls, int nodeid, struct dlm_message *ms)
 	struct rq_entry *e;
 	int length = ms->m_header.h_length - sizeof(struct dlm_message);
 
-	e = kmalloc(sizeof(struct rq_entry) + length, GFP_KERNEL);
+	e = kmalloc(sizeof(struct rq_entry) + length, ls->ls_allocation);
 	if (!e) {
 		log_print("dlm_add_requestqueue: out of memory len %d", length);
 		return;
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index fa4c7e7d15d..12d649602d3 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -27,6 +27,7 @@
 #include <linux/mount.h>
 #include <linux/key.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/file.h>
 #include <linux/crypto.h>
 #include "ecryptfs_kernel.h"
@@ -120,9 +121,13 @@ static void ecryptfs_put_super(struct super_block *sb)
 {
 	struct ecryptfs_sb_info *sb_info = ecryptfs_superblock_to_private(sb);
 
+	lock_kernel();
+
 	ecryptfs_destroy_mount_crypt_stat(&sb_info->mount_crypt_stat);
 	kmem_cache_free(ecryptfs_sb_info_cache, sb_info);
 	ecryptfs_set_superblock_private(sb, NULL);
+
+	unlock_kernel();
 }
 
 /**
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 2a701d593d3..3f0e1974abd 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -16,6 +16,7 @@
 #include <linux/anon_inodes.h>
 #include <linux/eventfd.h>
 #include <linux/syscalls.h>
+#include <linux/module.h>
 
 struct eventfd_ctx {
 	wait_queue_head_t wqh;
@@ -56,6 +57,7 @@ int eventfd_signal(struct file *file, int n)
 
 	return n;
 }
+EXPORT_SYMBOL_GPL(eventfd_signal);
 
 static int eventfd_release(struct inode *inode, struct file *file)
 {
@@ -197,6 +199,7 @@ struct file *eventfd_fget(int fd)
 
 	return file;
 }
+EXPORT_SYMBOL_GPL(eventfd_fget);
 
 SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index b1512c4bb8c..24667eedc02 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -175,10 +175,4 @@ int exofs_async_op(struct osd_request *or,
 
 int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr);
 
-int osd_req_read_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
-int osd_req_write_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
 #endif /*ifndef __EXOFS_COM_H__*/
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index ba8d9fab469..77d0a295eb1 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -59,10 +59,9 @@ static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
 		struct inode *inode)
 {
 	struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
-	struct request_queue *req_q = sbi->s_dev->scsi_device->request_queue;
 
 	pcol->sbi = sbi;
-	pcol->req_q = req_q;
+	pcol->req_q = osd_request_queue(sbi->s_dev);
 	pcol->inode = inode;
 	pcol->expected_pages = expected_pages;
 
@@ -266,7 +265,7 @@ static int read_exec(struct page_collect *pcol, bool is_sync)
 		goto err;
 	}
 
-	osd_req_read(or, &obj, pcol->bio, i_start);
+	osd_req_read(or, &obj, i_start, pcol->bio, pcol->length);
 
 	if (is_sync) {
 		exofs_sync_op(or, pcol->sbi->s_timeout, oi->i_cred);
@@ -522,7 +521,8 @@ static int write_exec(struct page_collect *pcol)
 
 	*pcol_copy = *pcol;
 
-	osd_req_write(or, &obj, pcol_copy->bio, i_start);
+	pcol_copy->bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+	osd_req_write(or, &obj, i_start, pcol_copy->bio, pcol_copy->length);
 	ret = exofs_async_op(or, writepages_done, pcol_copy, oi->i_cred);
 	if (unlikely(ret)) {
 		EXOFS_ERR("write_exec: exofs_async_op() Faild\n");
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index 06ca92672eb..b3d2ccb87aa 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -125,29 +125,3 @@ int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
 
 	return -EIO;
 }
-
-int osd_req_read_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
-	struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
-	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
-	if (!bio)
-		return -ENOMEM;
-
-	osd_req_read(or, obj, bio, offset);
-	return 0;
-}
-
-int osd_req_write_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
-	struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
-	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
-	if (!bio)
-		return -ENOMEM;
-
-	osd_req_write(or, obj, bio, offset);
-	return 0;
-}
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 9f1985e857e..8216c5b77b5 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -200,20 +200,21 @@ static const struct export_operations exofs_export_ops;
 /*
  * Write the superblock to the OSD
  */
-static void exofs_write_super(struct super_block *sb)
+static int exofs_sync_fs(struct super_block *sb, int wait)
 {
 	struct exofs_sb_info *sbi;
 	struct exofs_fscb *fscb;
 	struct osd_request *or;
 	struct osd_obj_id obj;
-	int ret;
+	int ret = -ENOMEM;
 
 	fscb = kzalloc(sizeof(struct exofs_fscb), GFP_KERNEL);
 	if (!fscb) {
 		EXOFS_ERR("exofs_write_super: memory allocation failed.\n");
-		return;
+		return -ENOMEM;
 	}
 
+	lock_super(sb);
 	lock_kernel();
 	sbi = sb->s_fs_info;
 	fscb->s_nextid = cpu_to_le64(sbi->s_nextid);
@@ -246,7 +247,17 @@ out:
 	if (or)
 		osd_end_request(or);
 	unlock_kernel();
+	unlock_super(sb);
 	kfree(fscb);
+	return ret;
+}
+
+static void exofs_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		exofs_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 /*
@@ -258,6 +269,11 @@ static void exofs_put_super(struct super_block *sb)
 	int num_pend;
 	struct exofs_sb_info *sbi = sb->s_fs_info;
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		exofs_write_super(sb);
+
 	/* make sure there are no pending commands */
 	for (num_pend = atomic_read(&sbi->s_curr_pending); num_pend > 0;
 	     num_pend = atomic_read(&sbi->s_curr_pending)) {
@@ -271,6 +287,8 @@ static void exofs_put_super(struct super_block *sb)
 	osduld_put_device(sbi->s_dev);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 /*
@@ -484,6 +502,7 @@ static const struct super_operations exofs_sops = {
 	.delete_inode   = exofs_delete_inode,
 	.put_super      = exofs_put_super,
 	.write_super    = exofs_write_super,
+	.sync_fs	= exofs_sync_fs,
 	.statfs         = exofs_statfs,
 };
 
diff --git a/fs/ext2/Makefile b/fs/ext2/Makefile
index e0b2b43c1fd..f42af45cfd8 100644
--- a/fs/ext2/Makefile
+++ b/fs/ext2/Makefile
@@ -4,7 +4,7 @@
 
 obj-$(CONFIG_EXT2_FS) += ext2.o
 
-ext2-y := balloc.o dir.o file.o fsync.o ialloc.o inode.o \
+ext2-y := balloc.o dir.o file.o ialloc.o inode.o \
 	  ioctl.o namei.o super.o symlink.o
 
 ext2-$(CONFIG_EXT2_FS_XATTR)	 += xattr.o xattr_user.o xattr_trusted.o
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 2999d72153b..003500498c2 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -720,5 +720,5 @@ const struct file_operations ext2_dir_operations = {
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ext2_compat_ioctl,
 #endif
-	.fsync		= ext2_sync_file,
+	.fsync		= simple_fsync,
 };
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 3203042b36e..f2e5811936d 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -27,7 +27,7 @@ struct ext2_inode_info {
 	/*
 	 * i_block_group is the number of the block group which contains
 	 * this file's inode.  Constant across the lifetime of the inode,
-	 * it is ued for making block allocation decisions - we try to
+	 * it is used for making block allocation decisions - we try to
 	 * place a file's data blocks near its inode block, and new inodes
 	 * near to their parent directory's inode.
 	 */
@@ -113,9 +113,6 @@ extern int ext2_empty_dir (struct inode *);
 extern struct ext2_dir_entry_2 * ext2_dotdot (struct inode *, struct page **);
 extern void ext2_set_link(struct inode *, struct ext2_dir_entry_2 *, struct page *, struct inode *);
 
-/* fsync.c */
-extern int ext2_sync_file (struct file *, struct dentry *, int);
-
 /* ialloc.c */
 extern struct inode * ext2_new_inode (struct inode *, int);
 extern void ext2_free_inode (struct inode *);
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 45ed0712218..2b9e47dc922 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -55,7 +55,7 @@ const struct file_operations ext2_file_operations = {
 	.mmap		= generic_file_mmap,
 	.open		= generic_file_open,
 	.release	= ext2_release_file,
-	.fsync		= ext2_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= generic_file_splice_write,
 };
@@ -72,7 +72,7 @@ const struct file_operations ext2_xip_file_operations = {
 	.mmap		= xip_file_mmap,
 	.open		= generic_file_open,
 	.release	= ext2_release_file,
-	.fsync		= ext2_sync_file,
+	.fsync		= simple_fsync,
 };
 #endif
 
diff --git a/fs/ext2/fsync.c b/fs/ext2/fsync.c
deleted file mode 100644
index fc66c93fcb5..00000000000
--- a/fs/ext2/fsync.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/fs/ext2/fsync.c
- *
- *  Copyright (C) 1993  Stephen Tweedie (sct@dcs.ed.ac.uk)
- *  from
- *  Copyright (C) 1992  Remy Card (card@masi.ibp.fr)
- *                      Laboratoire MASI - Institut Blaise Pascal
- *                      Universite Pierre et Marie Curie (Paris VI)
- *  from
- *  linux/fs/minix/truncate.c   Copyright (C) 1991, 1992  Linus Torvalds
- * 
- *  ext2fs fsync primitive
- *
- *  Big-endian to little-endian byte-swapping/bitmaps by
- *        David S. Miller (davem@caip.rutgers.edu), 1995
- * 
- *  Removed unnecessary code duplication for little endian machines
- *  and excessive __inline__s. 
- *        Andi Kleen, 1997
- *
- * Major simplications and cleanup - we only need to do the metadata, because
- * we can depend on generic_block_fdatasync() to sync the data blocks.
- */
-
-#include "ext2.h"
-#include <linux/buffer_head.h>		/* for sync_mapping_buffers() */
-
-
-/*
- *	File may be NULL when we are called. Perhaps we shouldn't
- *	even pass file to fsync ?
- */
-
-int ext2_sync_file(struct file *file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-	int ret;
-
-	ret = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return ret;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return ret;
-
-	err = ext2_sync_inode(inode);
-	if (ret == 0)
-		ret = err;
-	return ret;
-}
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index acf67883110..29ed682061f 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -41,8 +41,6 @@ MODULE_AUTHOR("Remy Card and others");
 MODULE_DESCRIPTION("Second Extended Filesystem");
 MODULE_LICENSE("GPL");
 
-static int ext2_update_inode(struct inode * inode, int do_sync);
-
 /*
  * Test whether an inode is a fast symlink.
  */
@@ -66,7 +64,7 @@ void ext2_delete_inode (struct inode * inode)
 		goto no_delete;
 	EXT2_I(inode)->i_dtime	= get_seconds();
 	mark_inode_dirty(inode);
-	ext2_update_inode(inode, inode_needs_sync(inode));
+	ext2_write_inode(inode, inode_needs_sync(inode));
 
 	inode->i_size = 0;
 	if (inode->i_blocks)
@@ -1337,7 +1335,7 @@ bad_inode:
 	return ERR_PTR(ret);
 }
 
-static int ext2_update_inode(struct inode * inode, int do_sync)
+int ext2_write_inode(struct inode *inode, int do_sync)
 {
 	struct ext2_inode_info *ei = EXT2_I(inode);
 	struct super_block *sb = inode->i_sb;
@@ -1442,11 +1440,6 @@ static int ext2_update_inode(struct inode * inode, int do_sync)
 	return err;
 }
 
-int ext2_write_inode(struct inode *inode, int wait)
-{
-	return ext2_update_inode(inode, wait);
-}
-
 int ext2_sync_inode(struct inode *inode)
 {
 	struct writeback_control wbc = {
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index e3c748faf2d..458999638c3 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -42,6 +42,7 @@ static void ext2_sync_super(struct super_block *sb,
 			    struct ext2_super_block *es);
 static int ext2_remount (struct super_block * sb, int * flags, char * data);
 static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf);
+static int ext2_sync_fs(struct super_block *sb, int wait);
 
 void ext2_error (struct super_block * sb, const char * function,
 		 const char * fmt, ...)
@@ -114,6 +115,11 @@ static void ext2_put_super (struct super_block * sb)
 	int i;
 	struct ext2_sb_info *sbi = EXT2_SB(sb);
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		ext2_write_super(sb);
+
 	ext2_xattr_put_super(sb);
 	if (!(sb->s_flags & MS_RDONLY)) {
 		struct ext2_super_block *es = sbi->s_es;
@@ -135,7 +141,7 @@ static void ext2_put_super (struct super_block * sb)
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 
-	return;
+	unlock_kernel();
 }
 
 static struct kmem_cache * ext2_inode_cachep;
@@ -304,6 +310,7 @@ static const struct super_operations ext2_sops = {
 	.delete_inode	= ext2_delete_inode,
 	.put_super	= ext2_put_super,
 	.write_super	= ext2_write_super,
+	.sync_fs	= ext2_sync_fs,
 	.statfs		= ext2_statfs,
 	.remount_fs	= ext2_remount,
 	.clear_inode	= ext2_clear_inode,
@@ -1127,25 +1134,36 @@ static void ext2_sync_super(struct super_block *sb, struct ext2_super_block *es)
  * set s_state to EXT2_VALID_FS after some corrections.
  */
 
-void ext2_write_super (struct super_block * sb)
+static int ext2_sync_fs(struct super_block *sb, int wait)
 {
-	struct ext2_super_block * es;
+	struct ext2_super_block *es = EXT2_SB(sb)->s_es;
+
 	lock_kernel();
-	if (!(sb->s_flags & MS_RDONLY)) {
-		es = EXT2_SB(sb)->s_es;
-
-		if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
-			ext2_debug ("setting valid to 0\n");
-			es->s_state &= cpu_to_le16(~EXT2_VALID_FS);
-			es->s_free_blocks_count = cpu_to_le32(ext2_count_free_blocks(sb));
-			es->s_free_inodes_count = cpu_to_le32(ext2_count_free_inodes(sb));
-			es->s_mtime = cpu_to_le32(get_seconds());
-			ext2_sync_super(sb, es);
-		} else
-			ext2_commit_super (sb, es);
+	if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
+		ext2_debug("setting valid to 0\n");
+		es->s_state &= cpu_to_le16(~EXT2_VALID_FS);
+		es->s_free_blocks_count =
+			cpu_to_le32(ext2_count_free_blocks(sb));
+		es->s_free_inodes_count =
+			cpu_to_le32(ext2_count_free_inodes(sb));
+		es->s_mtime = cpu_to_le32(get_seconds());
+		ext2_sync_super(sb, es);
+	} else {
+		ext2_commit_super(sb, es);
 	}
 	sb->s_dirt = 0;
 	unlock_kernel();
+
+	return 0;
+}
+
+
+void ext2_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		ext2_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static int ext2_remount (struct super_block * sb, int * flags, char * data)
@@ -1157,6 +1175,8 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
 	unsigned long old_sb_flags;
 	int err;
 
+	lock_kernel();
+
 	/* Store the old options */
 	old_sb_flags = sb->s_flags;
 	old_opts.s_mount_opt = sbi->s_mount_opt;
@@ -1192,12 +1212,16 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
 		sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
 		sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
 	}
-	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
+		unlock_kernel();
 		return 0;
+	}
 	if (*flags & MS_RDONLY) {
 		if (le16_to_cpu(es->s_state) & EXT2_VALID_FS ||
-		    !(sbi->s_mount_state & EXT2_VALID_FS))
+		    !(sbi->s_mount_state & EXT2_VALID_FS)) {
+			unlock_kernel();
 			return 0;
+		}
 		/*
 		 * OK, we are remounting a valid rw partition rdonly, so set
 		 * the rdonly flag and then mark the partition as valid again.
@@ -1224,12 +1248,14 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
 			sb->s_flags &= ~MS_RDONLY;
 	}
 	ext2_sync_super(sb, es);
+	unlock_kernel();
 	return 0;
 restore_opts:
 	sbi->s_mount_opt = old_opts.s_mount_opt;
 	sbi->s_resuid = old_opts.s_resuid;
 	sbi->s_resgid = old_opts.s_resgid;
 	sb->s_flags = old_sb_flags;
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 225202db897..27967f92e82 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -649,7 +649,7 @@ do_more:
 		count = overflow;
 		goto do_more;
 	}
-	sb->s_dirt = 1;
+
 error_return:
 	brelse(bitmap_bh);
 	ext3_std_error(sb, err);
@@ -1708,7 +1708,6 @@ allocated:
 	if (!fatal)
 		fatal = err;
 
-	sb->s_dirt = 1;
 	if (fatal)
 		goto out;
 
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index dd13d60d524..b3999128513 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -181,7 +181,7 @@ void ext3_free_inode (handle_t *handle, struct inode * inode)
 	err = ext3_journal_dirty_metadata(handle, bitmap_bh);
 	if (!fatal)
 		fatal = err;
-	sb->s_dirt = 1;
+
 error_return:
 	brelse(bitmap_bh);
 	ext3_std_error(sb, fatal);
@@ -537,7 +537,6 @@ got:
 	percpu_counter_dec(&sbi->s_freeinodes_counter);
 	if (S_ISDIR(mode))
 		percpu_counter_inc(&sbi->s_dirs_counter);
-	sb->s_dirt = 1;
 
 	inode->i_uid = current_fsuid();
 	if (test_opt (sb, GRPID))
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index fcfa2436185..b0248c6d5d4 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2960,7 +2960,6 @@ static int ext3_do_update_inode(handle_t *handle,
 				ext3_update_dynamic_rev(sb);
 				EXT3_SET_RO_COMPAT_FEATURE(sb,
 					EXT3_FEATURE_RO_COMPAT_LARGE_FILE);
-				sb->s_dirt = 1;
 				handle->h_sync = 1;
 				err = ext3_journal_dirty_metadata(handle,
 						EXT3_SB(sb)->s_sbh);
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 78fdf383637..8a0b26340b5 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -934,7 +934,6 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input)
 			   EXT3_INODES_PER_GROUP(sb));
 
 	ext3_journal_dirty_metadata(handle, sbi->s_sbh);
-	sb->s_dirt = 1;
 
 exit_journal:
 	unlock_super(sb);
@@ -1066,7 +1065,6 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
 	}
 	es->s_blocks_count = cpu_to_le32(o_blocks_count + add);
 	ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
-	sb->s_dirt = 1;
 	unlock_super(sb);
 	ext3_debug("freeing blocks %lu through "E3FSBLK"\n", o_blocks_count,
 		   o_blocks_count + add);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 3c70d52afb1..26aa64dee6a 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -67,7 +67,6 @@ static const char *ext3_decode_error(struct super_block * sb, int errno,
 static int ext3_remount (struct super_block * sb, int * flags, char * data);
 static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf);
 static int ext3_unfreeze(struct super_block *sb);
-static void ext3_write_super (struct super_block * sb);
 static int ext3_freeze(struct super_block *sb);
 
 /*
@@ -399,6 +398,8 @@ static void ext3_put_super (struct super_block * sb)
 	struct ext3_super_block *es = sbi->s_es;
 	int i, err;
 
+	lock_kernel();
+
 	ext3_xattr_put_super(sb);
 	err = journal_destroy(sbi->s_journal);
 	sbi->s_journal = NULL;
@@ -447,7 +448,8 @@ static void ext3_put_super (struct super_block * sb)
 	sb->s_fs_info = NULL;
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
-	return;
+
+	unlock_kernel();
 }
 
 static struct kmem_cache *ext3_inode_cachep;
@@ -761,7 +763,6 @@ static const struct super_operations ext3_sops = {
 	.dirty_inode	= ext3_dirty_inode,
 	.delete_inode	= ext3_delete_inode,
 	.put_super	= ext3_put_super,
-	.write_super	= ext3_write_super,
 	.sync_fs	= ext3_sync_fs,
 	.freeze_fs	= ext3_freeze,
 	.unfreeze_fs	= ext3_unfreeze,
@@ -1785,7 +1786,6 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 #else
 		es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
 #endif
-		sb->s_dirt = 1;
 	}
 
 	if (sbi->s_blocks_per_group > blocksize * 8) {
@@ -2265,7 +2265,6 @@ static int ext3_load_journal(struct super_block *sb,
 	if (journal_devnum &&
 	    journal_devnum != le32_to_cpu(es->s_journal_dev)) {
 		es->s_journal_dev = cpu_to_le32(journal_devnum);
-		sb->s_dirt = 1;
 
 		/* Make sure we flush the recovery flag to disk. */
 		ext3_commit_super(sb, es, 1);
@@ -2308,7 +2307,6 @@ static int ext3_create_journal(struct super_block * sb,
 	EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL);
 
 	es->s_journal_inum = cpu_to_le32(journal_inum);
-	sb->s_dirt = 1;
 
 	/* Make sure we flush the recovery flag to disk. */
 	ext3_commit_super(sb, es, 1);
@@ -2354,7 +2352,6 @@ static void ext3_mark_recovery_complete(struct super_block * sb,
 	if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
 	    sb->s_flags & MS_RDONLY) {
 		EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
-		sb->s_dirt = 0;
 		ext3_commit_super(sb, es, 1);
 	}
 	unlock_super(sb);
@@ -2413,29 +2410,14 @@ int ext3_force_commit(struct super_block *sb)
 		return 0;
 
 	journal = EXT3_SB(sb)->s_journal;
-	sb->s_dirt = 0;
 	ret = ext3_journal_force_commit(journal);
 	return ret;
 }
 
-/*
- * Ext3 always journals updates to the superblock itself, so we don't
- * have to propagate any other updates to the superblock on disk at this
- * point.  (We can probably nuke this function altogether, and remove
- * any mention to sb->s_dirt in all of fs/ext3; eventual cleanup...)
- */
-static void ext3_write_super (struct super_block * sb)
-{
-	if (mutex_trylock(&sb->s_lock) != 0)
-		BUG();
-	sb->s_dirt = 0;
-}
-
 static int ext3_sync_fs(struct super_block *sb, int wait)
 {
 	tid_t target;
 
-	sb->s_dirt = 0;
 	if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
 		if (wait)
 			log_wait_commit(EXT3_SB(sb)->s_journal, target);
@@ -2451,7 +2433,6 @@ static int ext3_freeze(struct super_block *sb)
 {
 	int error = 0;
 	journal_t *journal;
-	sb->s_dirt = 0;
 
 	if (!(sb->s_flags & MS_RDONLY)) {
 		journal = EXT3_SB(sb)->s_journal;
@@ -2509,7 +2490,10 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
 	int i;
 #endif
 
+	lock_kernel();
+
 	/* Store the original options */
+	lock_super(sb);
 	old_sb_flags = sb->s_flags;
 	old_opts.s_mount_opt = sbi->s_mount_opt;
 	old_opts.s_resuid = sbi->s_resuid;
@@ -2617,6 +2601,8 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
 		    old_opts.s_qf_names[i] != sbi->s_qf_names[i])
 			kfree(old_opts.s_qf_names[i]);
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return 0;
 restore_opts:
 	sb->s_flags = old_sb_flags;
@@ -2633,6 +2619,8 @@ restore_opts:
 		sbi->s_qf_names[i] = old_opts.s_qf_names[i];
 	}
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index 83b7be849bd..545e37c4b91 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -463,7 +463,6 @@ static void ext3_xattr_update_super_block(handle_t *handle,
 
 	if (ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh) == 0) {
 		EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_EXT_ATTR);
-		sb->s_dirt = 1;
 		ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
 	}
 }
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index f016707597a..012c4251397 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -576,6 +576,11 @@ static void ext4_put_super(struct super_block *sb)
 	struct ext4_super_block *es = sbi->s_es;
 	int i, err;
 
+	lock_super(sb);
+	lock_kernel();
+	if (sb->s_dirt)
+		ext4_commit_super(sb, 1);
+
 	ext4_release_system_zone(sb);
 	ext4_mb_release(sb);
 	ext4_ext_release(sb);
@@ -642,8 +647,6 @@ static void ext4_put_super(struct super_block *sb)
 	unlock_super(sb);
 	kobject_put(&sbi->s_kobj);
 	wait_for_completion(&sbi->s_kobj_unregister);
-	lock_super(sb);
-	lock_kernel();
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 }
@@ -3333,7 +3336,9 @@ int ext4_force_commit(struct super_block *sb)
 
 static void ext4_write_super(struct super_block *sb)
 {
+	lock_super(sb);
 	ext4_commit_super(sb, 1);
+	unlock_super(sb);
 }
 
 static int ext4_sync_fs(struct super_block *sb, int wait)
@@ -3417,7 +3422,10 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	int i;
 #endif
 
+	lock_kernel();
+
 	/* Store the original options */
+	lock_super(sb);
 	old_sb_flags = sb->s_flags;
 	old_opts.s_mount_opt = sbi->s_mount_opt;
 	old_opts.s_resuid = sbi->s_resuid;
@@ -3551,6 +3559,8 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		    old_opts.s_qf_names[i] != sbi->s_qf_names[i])
 			kfree(old_opts.s_qf_names[i]);
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return 0;
 
 restore_opts:
@@ -3570,6 +3580,8 @@ restore_opts:
 		sbi->s_qf_names[i] = old_opts.s_qf_names[i];
 	}
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/fat/cache.c b/fs/fat/cache.c
index b4260229808..923990e4f16 100644
--- a/fs/fat/cache.c
+++ b/fs/fat/cache.c
@@ -241,7 +241,7 @@ int fat_get_cluster(struct inode *inode, int cluster, int *fclus, int *dclus)
 	while (*fclus < cluster) {
 		/* prevent the infinite loop of cluster chain */
 		if (*fclus > limit) {
-			fat_fs_panic(sb, "%s: detected the cluster chain loop"
+			fat_fs_error(sb, "%s: detected the cluster chain loop"
 				     " (i_pos %lld)", __func__,
 				     MSDOS_I(inode)->i_pos);
 			nr = -EIO;
@@ -252,7 +252,7 @@ int fat_get_cluster(struct inode *inode, int cluster, int *fclus, int *dclus)
 		if (nr < 0)
 			goto out;
 		else if (nr == FAT_ENT_FREE) {
-			fat_fs_panic(sb, "%s: invalid cluster chain"
+			fat_fs_error(sb, "%s: invalid cluster chain"
 				     " (i_pos %lld)", __func__,
 				     MSDOS_I(inode)->i_pos);
 			nr = -EIO;
@@ -285,7 +285,7 @@ static int fat_bmap_cluster(struct inode *inode, int cluster)
 	if (ret < 0)
 		return ret;
 	else if (ret == FAT_ENT_EOF) {
-		fat_fs_panic(sb, "%s: request beyond EOF (i_pos %lld)",
+		fat_fs_error(sb, "%s: request beyond EOF (i_pos %lld)",
 			     __func__, MSDOS_I(inode)->i_pos);
 		return -EIO;
 	}
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 3a7f603b698..3b8e71b412f 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -840,7 +840,7 @@ const struct file_operations fat_dir_operations = {
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= fat_compat_dir_ioctl,
 #endif
-	.fsync		= file_fsync,
+	.fsync		= fat_file_fsync,
 };
 
 static int fat_get_short_entry(struct inode *dir, loff_t *pos,
@@ -967,7 +967,7 @@ static int __fat_remove_entries(struct inode *dir, loff_t pos, int nr_slots)
 			de++;
 			nr_slots--;
 		}
-		mark_buffer_dirty(bh);
+		mark_buffer_dirty_inode(bh, dir);
 		if (IS_DIRSYNC(dir))
 			err = sync_dirty_buffer(bh);
 		brelse(bh);
@@ -1001,7 +1001,7 @@ int fat_remove_entries(struct inode *dir, struct fat_slot_info *sinfo)
 		de--;
 		nr_slots--;
 	}
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	if (IS_DIRSYNC(dir))
 		err = sync_dirty_buffer(bh);
 	brelse(bh);
@@ -1051,7 +1051,7 @@ static int fat_zeroed_cluster(struct inode *dir, sector_t blknr, int nr_used,
 		}
 		memset(bhs[n]->b_data, 0, sb->s_blocksize);
 		set_buffer_uptodate(bhs[n]);
-		mark_buffer_dirty(bhs[n]);
+		mark_buffer_dirty_inode(bhs[n], dir);
 
 		n++;
 		blknr++;
@@ -1131,7 +1131,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 	de[0].size = de[1].size = 0;
 	memset(de + 2, 0, sb->s_blocksize - 2 * sizeof(*de));
 	set_buffer_uptodate(bhs[0]);
-	mark_buffer_dirty(bhs[0]);
+	mark_buffer_dirty_inode(bhs[0], dir);
 
 	err = fat_zeroed_cluster(dir, blknr, 1, bhs, MAX_BUF_PER_PAGE);
 	if (err)
@@ -1193,7 +1193,7 @@ static int fat_add_new_entries(struct inode *dir, void *slots, int nr_slots,
 			slots += copy;
 			size -= copy;
 			set_buffer_uptodate(bhs[n]);
-			mark_buffer_dirty(bhs[n]);
+			mark_buffer_dirty_inode(bhs[n], dir);
 			if (!size)
 				break;
 			n++;
@@ -1293,7 +1293,7 @@ found:
 		for (i = 0; i < long_bhs; i++) {
 			int copy = min_t(int, sb->s_blocksize - offset, size);
 			memcpy(bhs[i]->b_data + offset, slots, copy);
-			mark_buffer_dirty(bhs[i]);
+			mark_buffer_dirty_inode(bhs[i], dir);
 			offset = 0;
 			slots += copy;
 			size -= copy;
@@ -1304,7 +1304,7 @@ found:
 			/* Fill the short name slot. */
 			int copy = min_t(int, sb->s_blocksize - offset, size);
 			memcpy(bhs[i]->b_data + offset, slots, copy);
-			mark_buffer_dirty(bhs[i]);
+			mark_buffer_dirty_inode(bhs[i], dir);
 			if (IS_DIRSYNC(dir))
 				err = sync_dirty_buffer(bhs[i]);
 		}
@@ -1334,7 +1334,7 @@ found:
 			goto error_remove;
 		}
 		if (dir->i_size & (sbi->cluster_size - 1)) {
-			fat_fs_panic(sb, "Odd directory size");
+			fat_fs_error(sb, "Odd directory size");
 			dir->i_size = (dir->i_size + sbi->cluster_size - 1)
 				& ~((loff_t)sbi->cluster_size - 1);
 		}
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index ea440d65819..adb0e72a176 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -17,6 +17,10 @@
 #define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
 #define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
 
+#define FAT_ERRORS_CONT		1      /* ignore error and continue */
+#define FAT_ERRORS_PANIC	2      /* panic on error */
+#define FAT_ERRORS_RO		3      /* remount r/o on error */
+
 struct fat_mount_options {
 	uid_t fs_uid;
 	gid_t fs_gid;
@@ -26,6 +30,7 @@ struct fat_mount_options {
 	char *iocharset;          /* Charset used for filename input/display */
 	unsigned short shortname; /* flags for shortname display/create rule */
 	unsigned char name_check; /* r = relaxed, n = normal, s = strict */
+	unsigned char errors;	  /* On error: continue, panic, remount-ro */
 	unsigned short allow_utime;/* permission for setting the [am]time */
 	unsigned quiet:1,         /* set = fake successful chmods and chowns */
 		 showexec:1,      /* set = only set x bit for com/exe/bat */
@@ -74,6 +79,7 @@ struct msdos_sb_info {
 
 	int fatent_shift;
 	struct fatent_operations *fatent_ops;
+	struct inode *fat_inode;
 
 	spinlock_t inode_hash_lock;
 	struct hlist_head inode_hashtable[FAT_HASH_SIZE];
@@ -251,6 +257,7 @@ struct fat_entry {
 	} u;
 	int nr_bhs;
 	struct buffer_head *bhs[2];
+	struct inode *fat_inode;
 };
 
 static inline void fatent_init(struct fat_entry *fatent)
@@ -259,6 +266,7 @@ static inline void fatent_init(struct fat_entry *fatent)
 	fatent->entry = 0;
 	fatent->u.ent32_p = NULL;
 	fatent->bhs[0] = fatent->bhs[1] = NULL;
+	fatent->fat_inode = NULL;
 }
 
 static inline void fatent_set_entry(struct fat_entry *fatent, int entry)
@@ -275,6 +283,7 @@ static inline void fatent_brelse(struct fat_entry *fatent)
 		brelse(fatent->bhs[i]);
 	fatent->nr_bhs = 0;
 	fatent->bhs[0] = fatent->bhs[1] = NULL;
+	fatent->fat_inode = NULL;
 }
 
 extern void fat_ent_access_init(struct super_block *sb);
@@ -296,6 +305,8 @@ extern int fat_setattr(struct dentry * dentry, struct iattr * attr);
 extern void fat_truncate(struct inode *inode);
 extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		       struct kstat *stat);
+extern int fat_file_fsync(struct file *file, struct dentry *dentry,
+			  int datasync);
 
 /* fat/inode.c */
 extern void fat_attach(struct inode *inode, loff_t i_pos);
@@ -310,7 +321,7 @@ extern int fat_fill_super(struct super_block *sb, void *data, int silent,
 extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
 		            struct inode *i2);
 /* fat/misc.c */
-extern void fat_fs_panic(struct super_block *s, const char *fmt, ...)
+extern void fat_fs_error(struct super_block *s, const char *fmt, ...)
 	__attribute__ ((format (printf, 2, 3))) __cold;
 extern void fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index da6eea47872..a81037721a6 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -73,6 +73,8 @@ static int fat12_ent_bread(struct super_block *sb, struct fat_entry *fatent,
 	struct buffer_head **bhs = fatent->bhs;
 
 	WARN_ON(blocknr < MSDOS_SB(sb)->fat_start);
+	fatent->fat_inode = MSDOS_SB(sb)->fat_inode;
+
 	bhs[0] = sb_bread(sb, blocknr);
 	if (!bhs[0])
 		goto err;
@@ -103,6 +105,7 @@ static int fat_ent_bread(struct super_block *sb, struct fat_entry *fatent,
 	struct fatent_operations *ops = MSDOS_SB(sb)->fatent_ops;
 
 	WARN_ON(blocknr < MSDOS_SB(sb)->fat_start);
+	fatent->fat_inode = MSDOS_SB(sb)->fat_inode;
 	fatent->bhs[0] = sb_bread(sb, blocknr);
 	if (!fatent->bhs[0]) {
 		printk(KERN_ERR "FAT: FAT read failed (blocknr %llu)\n",
@@ -167,9 +170,9 @@ static void fat12_ent_put(struct fat_entry *fatent, int new)
 	}
 	spin_unlock(&fat12_entry_lock);
 
-	mark_buffer_dirty(fatent->bhs[0]);
+	mark_buffer_dirty_inode(fatent->bhs[0], fatent->fat_inode);
 	if (fatent->nr_bhs == 2)
-		mark_buffer_dirty(fatent->bhs[1]);
+		mark_buffer_dirty_inode(fatent->bhs[1], fatent->fat_inode);
 }
 
 static void fat16_ent_put(struct fat_entry *fatent, int new)
@@ -178,7 +181,7 @@ static void fat16_ent_put(struct fat_entry *fatent, int new)
 		new = EOF_FAT16;
 
 	*fatent->u.ent16_p = cpu_to_le16(new);
-	mark_buffer_dirty(fatent->bhs[0]);
+	mark_buffer_dirty_inode(fatent->bhs[0], fatent->fat_inode);
 }
 
 static void fat32_ent_put(struct fat_entry *fatent, int new)
@@ -189,7 +192,7 @@ static void fat32_ent_put(struct fat_entry *fatent, int new)
 	WARN_ON(new & 0xf0000000);
 	new |= le32_to_cpu(*fatent->u.ent32_p) & ~0x0fffffff;
 	*fatent->u.ent32_p = cpu_to_le32(new);
-	mark_buffer_dirty(fatent->bhs[0]);
+	mark_buffer_dirty_inode(fatent->bhs[0], fatent->fat_inode);
 }
 
 static int fat12_ent_next(struct fat_entry *fatent)
@@ -345,7 +348,7 @@ int fat_ent_read(struct inode *inode, struct fat_entry *fatent, int entry)
 
 	if (entry < FAT_START_ENT || sbi->max_cluster <= entry) {
 		fatent_brelse(fatent);
-		fat_fs_panic(sb, "invalid access to FAT (entry 0x%08x)", entry);
+		fat_fs_error(sb, "invalid access to FAT (entry 0x%08x)", entry);
 		return -EIO;
 	}
 
@@ -381,7 +384,7 @@ static int fat_mirror_bhs(struct super_block *sb, struct buffer_head **bhs,
 			}
 			memcpy(c_bh->b_data, bhs[n]->b_data, sb->s_blocksize);
 			set_buffer_uptodate(c_bh);
-			mark_buffer_dirty(c_bh);
+			mark_buffer_dirty_inode(c_bh, sbi->fat_inode);
 			if (sb->s_flags & MS_SYNCHRONOUS)
 				err = sync_dirty_buffer(c_bh);
 			brelse(c_bh);
@@ -557,7 +560,7 @@ int fat_free_clusters(struct inode *inode, int cluster)
 			err = cluster;
 			goto error;
 		} else if (cluster == FAT_ENT_FREE) {
-			fat_fs_panic(sb, "%s: deleting FAT entry beyond EOF",
+			fat_fs_error(sb, "%s: deleting FAT entry beyond EOF",
 				     __func__);
 			err = -EIO;
 			goto error;
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 0a7f4a9918b..b28ea646ff6 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -18,106 +18,112 @@
 #include <linux/security.h>
 #include "fat.h"
 
-int fat_generic_ioctl(struct inode *inode, struct file *filp,
-		      unsigned int cmd, unsigned long arg)
+static int fat_ioctl_get_attributes(struct inode *inode, u32 __user *user_attr)
+{
+	u32 attr;
+
+	mutex_lock(&inode->i_mutex);
+	attr = fat_make_attrs(inode);
+	mutex_unlock(&inode->i_mutex);
+
+	return put_user(attr, user_attr);
+}
+
+static int fat_ioctl_set_attributes(struct file *file, u32 __user *user_attr)
 {
+	struct inode *inode = file->f_path.dentry->d_inode;
 	struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
-	u32 __user *user_attr = (u32 __user *)arg;
+	int is_dir = S_ISDIR(inode->i_mode);
+	u32 attr, oldattr;
+	struct iattr ia;
+	int err;
 
-	switch (cmd) {
-	case FAT_IOCTL_GET_ATTRIBUTES:
-	{
-		u32 attr;
+	err = get_user(attr, user_attr);
+	if (err)
+		goto out;
 
-		mutex_lock(&inode->i_mutex);
-		attr = fat_make_attrs(inode);
-		mutex_unlock(&inode->i_mutex);
+	mutex_lock(&inode->i_mutex);
+	err = mnt_want_write(file->f_path.mnt);
+	if (err)
+		goto out_unlock_inode;
 
-		return put_user(attr, user_attr);
+	/*
+	 * ATTR_VOLUME and ATTR_DIR cannot be changed; this also
+	 * prevents the user from turning us into a VFAT
+	 * longname entry.  Also, we obviously can't set
+	 * any of the NTFS attributes in the high 24 bits.
+	 */
+	attr &= 0xff & ~(ATTR_VOLUME | ATTR_DIR);
+	/* Merge in ATTR_VOLUME and ATTR_DIR */
+	attr |= (MSDOS_I(inode)->i_attrs & ATTR_VOLUME) |
+		(is_dir ? ATTR_DIR : 0);
+	oldattr = fat_make_attrs(inode);
+
+	/* Equivalent to a chmod() */
+	ia.ia_valid = ATTR_MODE | ATTR_CTIME;
+	ia.ia_ctime = current_fs_time(inode->i_sb);
+	if (is_dir)
+		ia.ia_mode = fat_make_mode(sbi, attr, S_IRWXUGO);
+	else {
+		ia.ia_mode = fat_make_mode(sbi, attr,
+			S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO));
 	}
-	case FAT_IOCTL_SET_ATTRIBUTES:
-	{
-		u32 attr, oldattr;
-		int err, is_dir = S_ISDIR(inode->i_mode);
-		struct iattr ia;
 
-		err = get_user(attr, user_attr);
-		if (err)
-			return err;
+	/* The root directory has no attributes */
+	if (inode->i_ino == MSDOS_ROOT_INO && attr != ATTR_DIR) {
+		err = -EINVAL;
+		goto out_drop_write;
+	}
 
-		mutex_lock(&inode->i_mutex);
-
-		err = mnt_want_write(filp->f_path.mnt);
-		if (err)
-			goto up_no_drop_write;
-
-		/*
-		 * ATTR_VOLUME and ATTR_DIR cannot be changed; this also
-		 * prevents the user from turning us into a VFAT
-		 * longname entry.  Also, we obviously can't set
-		 * any of the NTFS attributes in the high 24 bits.
-		 */
-		attr &= 0xff & ~(ATTR_VOLUME | ATTR_DIR);
-		/* Merge in ATTR_VOLUME and ATTR_DIR */
-		attr |= (MSDOS_I(inode)->i_attrs & ATTR_VOLUME) |
-			(is_dir ? ATTR_DIR : 0);
-		oldattr = fat_make_attrs(inode);
-
-		/* Equivalent to a chmod() */
-		ia.ia_valid = ATTR_MODE | ATTR_CTIME;
-		ia.ia_ctime = current_fs_time(inode->i_sb);
-		if (is_dir)
-			ia.ia_mode = fat_make_mode(sbi, attr, S_IRWXUGO);
-		else {
-			ia.ia_mode = fat_make_mode(sbi, attr,
-				S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO));
-		}
+	if (sbi->options.sys_immutable &&
+	    ((attr | oldattr) & ATTR_SYS) &&
+	    !capable(CAP_LINUX_IMMUTABLE)) {
+		err = -EPERM;
+		goto out_drop_write;
+	}
 
-		/* The root directory has no attributes */
-		if (inode->i_ino == MSDOS_ROOT_INO && attr != ATTR_DIR) {
-			err = -EINVAL;
-			goto up;
-		}
+	/*
+	 * The security check is questionable...  We single
+	 * out the RO attribute for checking by the security
+	 * module, just because it maps to a file mode.
+	 */
+	err = security_inode_setattr(file->f_path.dentry, &ia);
+	if (err)
+		goto out_drop_write;
 
-		if (sbi->options.sys_immutable) {
-			if ((attr | oldattr) & ATTR_SYS) {
-				if (!capable(CAP_LINUX_IMMUTABLE)) {
-					err = -EPERM;
-					goto up;
-				}
-			}
-		}
+	/* This MUST be done before doing anything irreversible... */
+	err = fat_setattr(file->f_path.dentry, &ia);
+	if (err)
+		goto out_drop_write;
+
+	fsnotify_change(file->f_path.dentry, ia.ia_valid);
+	if (sbi->options.sys_immutable) {
+		if (attr & ATTR_SYS)
+			inode->i_flags |= S_IMMUTABLE;
+		else
+			inode->i_flags &= S_IMMUTABLE;
+	}
 
-		/*
-		 * The security check is questionable...  We single
-		 * out the RO attribute for checking by the security
-		 * module, just because it maps to a file mode.
-		 */
-		err = security_inode_setattr(filp->f_path.dentry, &ia);
-		if (err)
-			goto up;
-
-		/* This MUST be done before doing anything irreversible... */
-		err = fat_setattr(filp->f_path.dentry, &ia);
-		if (err)
-			goto up;
-
-		fsnotify_change(filp->f_path.dentry, ia.ia_valid);
-		if (sbi->options.sys_immutable) {
-			if (attr & ATTR_SYS)
-				inode->i_flags |= S_IMMUTABLE;
-			else
-				inode->i_flags &= S_IMMUTABLE;
-		}
+	fat_save_attrs(inode, attr);
+	mark_inode_dirty(inode);
+out_drop_write:
+	mnt_drop_write(file->f_path.mnt);
+out_unlock_inode:
+	mutex_unlock(&inode->i_mutex);
+out:
+	return err;
+}
 
-		fat_save_attrs(inode, attr);
-		mark_inode_dirty(inode);
-up:
-		mnt_drop_write(filp->f_path.mnt);
-up_no_drop_write:
-		mutex_unlock(&inode->i_mutex);
-		return err;
-	}
+int fat_generic_ioctl(struct inode *inode, struct file *filp,
+		      unsigned int cmd, unsigned long arg)
+{
+	u32 __user *user_attr = (u32 __user *)arg;
+
+	switch (cmd) {
+	case FAT_IOCTL_GET_ATTRIBUTES:
+		return fat_ioctl_get_attributes(inode, user_attr);
+	case FAT_IOCTL_SET_ATTRIBUTES:
+		return fat_ioctl_set_attributes(filp, user_attr);
 	default:
 		return -ENOTTY;	/* Inappropriate ioctl for device */
 	}
@@ -133,6 +139,18 @@ static int fat_file_release(struct inode *inode, struct file *filp)
 	return 0;
 }
 
+int fat_file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+{
+	struct inode *inode = dentry->d_inode;
+	int res, err;
+
+	res = simple_fsync(filp, dentry, datasync);
+	err = sync_mapping_buffers(MSDOS_SB(inode->i_sb)->fat_inode->i_mapping);
+
+	return res ? res : err;
+}
+
+
 const struct file_operations fat_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
@@ -142,7 +160,7 @@ const struct file_operations fat_file_operations = {
 	.mmap		= generic_file_mmap,
 	.release	= fat_file_release,
 	.ioctl		= fat_generic_ioctl,
-	.fsync		= file_fsync,
+	.fsync		= fat_file_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -213,7 +231,7 @@ static int fat_free(struct inode *inode, int skip)
 			fatent_brelse(&fatent);
 			return 0;
 		} else if (ret == FAT_ENT_FREE) {
-			fat_fs_panic(sb,
+			fat_fs_error(sb,
 				     "%s: invalid cluster chain (i_pos %lld)",
 				     __func__, MSDOS_I(inode)->i_pos);
 			ret = -EIO;
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 296785a0dec..304b411cb8b 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -76,7 +76,7 @@ static inline int __fat_get_block(struct inode *inode, sector_t iblock,
 		return 0;
 
 	if (iblock != MSDOS_I(inode)->mmu_private >> sb->s_blocksize_bits) {
-		fat_fs_panic(sb, "corrupted file size (i_pos %lld, %lld)",
+		fat_fs_error(sb, "corrupted file size (i_pos %lld, %lld)",
 			MSDOS_I(inode)->i_pos, MSDOS_I(inode)->mmu_private);
 		return -EIO;
 	}
@@ -441,16 +441,35 @@ static void fat_clear_inode(struct inode *inode)
 
 static void fat_write_super(struct super_block *sb)
 {
+	lock_super(sb);
 	sb->s_dirt = 0;
 
 	if (!(sb->s_flags & MS_RDONLY))
 		fat_clusters_flush(sb);
+	unlock_super(sb);
+}
+
+static int fat_sync_fs(struct super_block *sb, int wait)
+{
+	lock_super(sb);
+	fat_clusters_flush(sb);
+	sb->s_dirt = 0;
+	unlock_super(sb);
+
+	return 0;
 }
 
 static void fat_put_super(struct super_block *sb)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		fat_write_super(sb);
+
+	iput(sbi->fat_inode);
+
 	if (sbi->nls_disk) {
 		unload_nls(sbi->nls_disk);
 		sbi->nls_disk = NULL;
@@ -467,6 +486,8 @@ static void fat_put_super(struct super_block *sb)
 
 	sb->s_fs_info = NULL;
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 static struct kmem_cache *fat_inode_cachep;
@@ -632,6 +653,7 @@ static const struct super_operations fat_sops = {
 	.delete_inode	= fat_delete_inode,
 	.put_super	= fat_put_super,
 	.write_super	= fat_write_super,
+	.sync_fs	= fat_sync_fs,
 	.statfs		= fat_statfs,
 	.clear_inode	= fat_clear_inode,
 	.remount_fs	= fat_remount,
@@ -834,6 +856,12 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt)
 		seq_puts(m, ",flush");
 	if (opts->tz_utc)
 		seq_puts(m, ",tz=UTC");
+	if (opts->errors == FAT_ERRORS_CONT)
+		seq_puts(m, ",errors=continue");
+	else if (opts->errors == FAT_ERRORS_PANIC)
+		seq_puts(m, ",errors=panic");
+	else
+		seq_puts(m, ",errors=remount-ro");
 
 	return 0;
 }
@@ -846,7 +874,8 @@ enum {
 	Opt_charset, Opt_shortname_lower, Opt_shortname_win95,
 	Opt_shortname_winnt, Opt_shortname_mixed, Opt_utf8_no, Opt_utf8_yes,
 	Opt_uni_xl_no, Opt_uni_xl_yes, Opt_nonumtail_no, Opt_nonumtail_yes,
-	Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_rodir, Opt_err,
+	Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_rodir, Opt_err_cont,
+	Opt_err_panic, Opt_err_ro, Opt_err,
 };
 
 static const match_table_t fat_tokens = {
@@ -869,6 +898,11 @@ static const match_table_t fat_tokens = {
 	{Opt_showexec, "showexec"},
 	{Opt_debug, "debug"},
 	{Opt_immutable, "sys_immutable"},
+	{Opt_flush, "flush"},
+	{Opt_tz_utc, "tz=UTC"},
+	{Opt_err_cont, "errors=continue"},
+	{Opt_err_panic, "errors=panic"},
+	{Opt_err_ro, "errors=remount-ro"},
 	{Opt_obsolate, "conv=binary"},
 	{Opt_obsolate, "conv=text"},
 	{Opt_obsolate, "conv=auto"},
@@ -880,8 +914,6 @@ static const match_table_t fat_tokens = {
 	{Opt_obsolate, "cvf_format=%20s"},
 	{Opt_obsolate, "cvf_options=%100s"},
 	{Opt_obsolate, "posix"},
-	{Opt_flush, "flush"},
-	{Opt_tz_utc, "tz=UTC"},
 	{Opt_err, NULL},
 };
 static const match_table_t msdos_tokens = {
@@ -951,6 +983,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 	opts->numtail = 1;
 	opts->usefree = opts->nocase = 0;
 	opts->tz_utc = 0;
+	opts->errors = FAT_ERRORS_RO;
 	*debug = 0;
 
 	if (!options)
@@ -1043,6 +1076,15 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 		case Opt_tz_utc:
 			opts->tz_utc = 1;
 			break;
+		case Opt_err_cont:
+			opts->errors = FAT_ERRORS_CONT;
+			break;
+		case Opt_err_panic:
+			opts->errors = FAT_ERRORS_PANIC;
+			break;
+		case Opt_err_ro:
+			opts->errors = FAT_ERRORS_RO;
+			break;
 
 		/* msdos specific */
 		case Opt_dots:
@@ -1174,7 +1216,7 @@ static int fat_read_root(struct inode *inode)
 int fat_fill_super(struct super_block *sb, void *data, int silent,
 		   const struct inode_operations *fs_dir_inode_ops, int isvfat)
 {
-	struct inode *root_inode = NULL;
+	struct inode *root_inode = NULL, *fat_inode = NULL;
 	struct buffer_head *bh;
 	struct fat_boot_sector *b;
 	struct msdos_sb_info *sbi;
@@ -1414,6 +1456,11 @@ int fat_fill_super(struct super_block *sb, void *data, int silent,
 	}
 
 	error = -ENOMEM;
+	fat_inode = new_inode(sb);
+	if (!fat_inode)
+		goto out_fail;
+	MSDOS_I(fat_inode)->i_pos = 0;
+	sbi->fat_inode = fat_inode;
 	root_inode = new_inode(sb);
 	if (!root_inode)
 		goto out_fail;
@@ -1439,6 +1486,8 @@ out_invalid:
 		       " on dev %s.\n", sb->s_id);
 
 out_fail:
+	if (fat_inode)
+		iput(fat_inode);
 	if (root_inode)
 		iput(root_inode);
 	if (sbi->nls_io)
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index ac39ebcc149..a6c20473dfd 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -12,14 +12,19 @@
 #include "fat.h"
 
 /*
- * fat_fs_panic reports a severe file system problem and sets the file system
- * read-only. The file system can be made writable again by remounting it.
+ * fat_fs_error reports a file system problem that might indicate fa data
+ * corruption/inconsistency. Depending on 'errors' mount option the
+ * panic() is called, or error message is printed FAT and nothing is done,
+ * or filesystem is remounted read-only (default behavior).
+ * In case the file system is remounted read-only, it can be made writable
+ * again by remounting it.
  */
-void fat_fs_panic(struct super_block *s, const char *fmt, ...)
+void fat_fs_error(struct super_block *s, const char *fmt, ...)
 {
+	struct fat_mount_options *opts = &MSDOS_SB(s)->options;
 	va_list args;
 
-	printk(KERN_ERR "FAT: Filesystem panic (dev %s)\n", s->s_id);
+	printk(KERN_ERR "FAT: Filesystem error (dev %s)\n", s->s_id);
 
 	printk(KERN_ERR "    ");
 	va_start(args, fmt);
@@ -27,13 +32,14 @@ void fat_fs_panic(struct super_block *s, const char *fmt, ...)
 	va_end(args);
 	printk("\n");
 
-	if (!(s->s_flags & MS_RDONLY)) {
+	if (opts->errors == FAT_ERRORS_PANIC)
+		panic("    FAT fs panic from previous error\n");
+	else if (opts->errors == FAT_ERRORS_RO && !(s->s_flags & MS_RDONLY)) {
 		s->s_flags |= MS_RDONLY;
 		printk(KERN_ERR "    File system has been set read-only\n");
 	}
 }
-
-EXPORT_SYMBOL_GPL(fat_fs_panic);
+EXPORT_SYMBOL_GPL(fat_fs_error);
 
 /* Flushes the number of free clusters on FAT32 */
 /* XXX: Need to write one per FSINFO block.  Currently only writes 1 */
@@ -124,7 +130,7 @@ int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster)
 			mark_inode_dirty(inode);
 	}
 	if (new_fclus != (inode->i_blocks >> (sbi->cluster_bits - 9))) {
-		fat_fs_panic(sb, "clusters badly computed (%d != %llu)",
+		fat_fs_error(sb, "clusters badly computed (%d != %llu)",
 			     new_fclus,
 			     (llu)(inode->i_blocks >> (sbi->cluster_bits - 9)));
 		fat_cache_inval_inode(inode);
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index da3f361a37d..82f88733b68 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -544,7 +544,7 @@ static int do_msdos_rename(struct inode *old_dir, unsigned char *old_name,
 		int start = MSDOS_I(new_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		if (IS_DIRSYNC(new_dir)) {
 			err = sync_dirty_buffer(dotdot_bh);
 			if (err)
@@ -586,7 +586,7 @@ error_dotdot:
 		int start = MSDOS_I(old_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		corrupt |= sync_dirty_buffer(dotdot_bh);
 	}
 error_inode:
@@ -608,7 +608,7 @@ error_inode:
 		sinfo.bh = NULL;
 	}
 	if (corrupt < 0) {
-		fat_fs_panic(new_dir->i_sb,
+		fat_fs_error(new_dir->i_sb,
 			     "%s: Filesystem corrupted (i_pos %lld)",
 			     __func__, sinfo.i_pos);
 	}
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index a0e00e3a46e..8d6fdcfd41d 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -965,7 +965,7 @@ static int vfat_rename(struct inode *old_dir, struct dentry *old_dentry,
 		int start = MSDOS_I(new_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		if (IS_DIRSYNC(new_dir)) {
 			err = sync_dirty_buffer(dotdot_bh);
 			if (err)
@@ -1009,7 +1009,7 @@ error_dotdot:
 		int start = MSDOS_I(old_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		corrupt |= sync_dirty_buffer(dotdot_bh);
 	}
 error_inode:
@@ -1030,7 +1030,7 @@ error_inode:
 		sinfo.bh = NULL;
 	}
 	if (corrupt < 0) {
-		fat_fs_panic(new_dir->i_sb,
+		fat_fs_error(new_dir->i_sb,
 			     "%s: Filesystem corrupted (i_pos %lld)",
 			     __func__, sinfo.i_pos);
 	}
diff --git a/fs/file_table.c b/fs/file_table.c
index 54018fe4884..334ce39881f 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -214,7 +214,7 @@ int init_file(struct file *file, struct vfsmount *mnt, struct dentry *dentry,
 	 */
 	if ((mode & FMODE_WRITE) && !special_file(dentry->d_inode->i_mode)) {
 		file_take_write(file);
-		error = mnt_want_write(mnt);
+		error = mnt_clone_write(mnt);
 		WARN_ON(error);
 	}
 	return error;
@@ -399,6 +399,44 @@ too_bad:
 	return 0;
 }
 
+/**
+ *	mark_files_ro - mark all files read-only
+ *	@sb: superblock in question
+ *
+ *	All files are marked read-only.  We don't care about pending
+ *	delete files so this should be used in 'force' mode only.
+ */
+void mark_files_ro(struct super_block *sb)
+{
+	struct file *f;
+
+retry:
+	file_list_lock();
+	list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
+		struct vfsmount *mnt;
+		if (!S_ISREG(f->f_path.dentry->d_inode->i_mode))
+		       continue;
+		if (!file_count(f))
+			continue;
+		if (!(f->f_mode & FMODE_WRITE))
+			continue;
+		f->f_mode &= ~FMODE_WRITE;
+		if (file_check_writeable(f) != 0)
+			continue;
+		file_release_write(f);
+		mnt = mntget(f->f_path.mnt);
+		file_list_unlock();
+		/*
+		 * This can sleep, so we can't hold
+		 * the file_list_lock() spinlock.
+		 */
+		mnt_drop_write(mnt);
+		mntput(mnt);
+		goto retry;
+	}
+	file_list_unlock();
+}
+
 void __init files_init(unsigned long mempages)
 { 
 	int n; 
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 1dacda83157..cdbd1654e4c 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -80,12 +80,16 @@ vxfs_put_super(struct super_block *sbp)
 {
 	struct vxfs_sb_info	*infp = VXFS_SBI(sbp);
 
+	lock_kernel();
+
 	vxfs_put_fake_inode(infp->vsi_fship);
 	vxfs_put_fake_inode(infp->vsi_ilist);
 	vxfs_put_fake_inode(infp->vsi_stilist);
 
 	brelse(infp->vsi_bp);
 	kfree(infp);
+
+	unlock_kernel();
 }
 
 /**
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 91013ff7dd5..40308e98c6a 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -64,6 +64,28 @@ static void writeback_release(struct backing_dev_info *bdi)
 	clear_bit(BDI_pdflush, &bdi->state);
 }
 
+static noinline void block_dump___mark_inode_dirty(struct inode *inode)
+{
+	if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
+		struct dentry *dentry;
+		const char *name = "?";
+
+		dentry = d_find_alias(inode);
+		if (dentry) {
+			spin_lock(&dentry->d_lock);
+			name = (const char *) dentry->d_name.name;
+		}
+		printk(KERN_DEBUG
+		       "%s(%d): dirtied inode %lu (%s) on %s\n",
+		       current->comm, task_pid_nr(current), inode->i_ino,
+		       name, inode->i_sb->s_id);
+		if (dentry) {
+			spin_unlock(&dentry->d_lock);
+			dput(dentry);
+		}
+	}
+}
+
 /**
  *	__mark_inode_dirty -	internal function
  *	@inode: inode to mark
@@ -114,23 +136,8 @@ void __mark_inode_dirty(struct inode *inode, int flags)
 	if ((inode->i_state & flags) == flags)
 		return;
 
-	if (unlikely(block_dump)) {
-		struct dentry *dentry = NULL;
-		const char *name = "?";
-
-		if (!list_empty(&inode->i_dentry)) {
-			dentry = list_entry(inode->i_dentry.next,
-					    struct dentry, d_alias);
-			if (dentry && dentry->d_name.name)
-				name = (const char *) dentry->d_name.name;
-		}
-
-		if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev"))
-			printk(KERN_DEBUG
-			       "%s(%d): dirtied inode %lu (%s) on %s\n",
-			       current->comm, task_pid_nr(current), inode->i_ino,
-			       name, inode->i_sb->s_id);
-	}
+	if (unlikely(block_dump))
+		block_dump___mark_inode_dirty(inode);
 
 	spin_lock(&inode_lock);
 	if ((inode->i_state & flags) != flags) {
@@ -289,7 +296,6 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 	int ret;
 
 	BUG_ON(inode->i_state & I_SYNC);
-	WARN_ON(inode->i_state & I_NEW);
 
 	/* Set I_SYNC, reset I_DIRTY */
 	dirty = inode->i_state & I_DIRTY;
@@ -314,7 +320,6 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 	}
 
 	spin_lock(&inode_lock);
-	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state &= ~I_SYNC;
 	if (!(inode->i_state & I_FREEING)) {
 		if (!(inode->i_state & I_DIRTY) &&
@@ -679,55 +684,6 @@ void sync_inodes_sb(struct super_block *sb, int wait)
 }
 
 /**
- * sync_inodes - writes all inodes to disk
- * @wait: wait for completion
- *
- * sync_inodes() goes through each super block's dirty inode list, writes the
- * inodes out, waits on the writeout and puts the inodes back on the normal
- * list.
- *
- * This is for sys_sync().  fsync_dev() uses the same algorithm.  The subtle
- * part of the sync functions is that the blockdev "superblock" is processed
- * last.  This is because the write_inode() function of a typical fs will
- * perform no I/O, but will mark buffers in the blockdev mapping as dirty.
- * What we want to do is to perform all that dirtying first, and then write
- * back all those inode blocks via the blockdev mapping in one sweep.  So the
- * additional (somewhat redundant) sync_blockdev() calls here are to make
- * sure that really happens.  Because if we call sync_inodes_sb(wait=1) with
- * outstanding dirty inodes, the writeback goes block-at-a-time within the
- * filesystem's write_inode().  This is extremely slow.
- */
-static void __sync_inodes(int wait)
-{
-	struct super_block *sb;
-
-	spin_lock(&sb_lock);
-restart:
-	list_for_each_entry(sb, &super_blocks, s_list) {
-		sb->s_count++;
-		spin_unlock(&sb_lock);
-		down_read(&sb->s_umount);
-		if (sb->s_root) {
-			sync_inodes_sb(sb, wait);
-			sync_blockdev(sb->s_bdev);
-		}
-		up_read(&sb->s_umount);
-		spin_lock(&sb_lock);
-		if (__put_super_and_need_restart(sb))
-			goto restart;
-	}
-	spin_unlock(&sb_lock);
-}
-
-void sync_inodes(int wait)
-{
-	__sync_inodes(0);
-
-	if (wait)
-		__sync_inodes(1);
-}
-
-/**
  * write_inode_now	-	write an inode to disk
  * @inode: inode to write to disk
  * @sync: whether the write should be synchronous or not
diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
index 72437065f6a..e95eeb445e5 100644
--- a/fs/fuse/Makefile
+++ b/fs/fuse/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_FUSE_FS) += fuse.o
+obj-$(CONFIG_CUSE) += cuse.o
 
 fuse-objs := dev.o dir.o file.o inode.o control.o
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
new file mode 100644
index 00000000000..de792dcf327
--- /dev/null
+++ b/fs/fuse/cuse.c
@@ -0,0 +1,610 @@
+/*
+ * CUSE: Character device in Userspace
+ *
+ * Copyright (C) 2008-2009  SUSE Linux Products GmbH
+ * Copyright (C) 2008-2009  Tejun Heo <tj@kernel.org>
+ *
+ * This file is released under the GPLv2.
+ *
+ * CUSE enables character devices to be implemented from userland much
+ * like FUSE allows filesystems.  On initialization /dev/cuse is
+ * created.  By opening the file and replying to the CUSE_INIT request
+ * userland CUSE server can create a character device.  After that the
+ * operation is very similar to FUSE.
+ *
+ * A CUSE instance involves the following objects.
+ *
+ * cuse_conn	: contains fuse_conn and serves as bonding structure
+ * channel	: file handle connected to the userland CUSE server
+ * cdev		: the implemented character device
+ * dev		: generic device for cdev
+ *
+ * Note that 'channel' is what 'dev' is in FUSE.  As CUSE deals with
+ * devices, it's called 'channel' to reduce confusion.
+ *
+ * channel determines when the character device dies.  When channel is
+ * closed, everything begins to destruct.  The cuse_conn is taken off
+ * the lookup table preventing further access from cdev, cdev and
+ * generic device are removed and the base reference of cuse_conn is
+ * put.
+ *
+ * On each open, the matching cuse_conn is looked up and if found an
+ * additional reference is taken which is released when the file is
+ * closed.
+ */
+
+#include <linux/fuse.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kdev_t.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/magic.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+
+#include "fuse_i.h"
+
+#define CUSE_CONNTBL_LEN	64
+
+struct cuse_conn {
+	struct list_head	list;	/* linked on cuse_conntbl */
+	struct fuse_conn	fc;	/* fuse connection */
+	struct cdev		*cdev;	/* associated character device */
+	struct device		*dev;	/* device representing @cdev */
+
+	/* init parameters, set once during initialization */
+	bool			unrestricted_ioctl;
+};
+
+static DEFINE_SPINLOCK(cuse_lock);		/* protects cuse_conntbl */
+static struct list_head cuse_conntbl[CUSE_CONNTBL_LEN];
+static struct class *cuse_class;
+
+static struct cuse_conn *fc_to_cc(struct fuse_conn *fc)
+{
+	return container_of(fc, struct cuse_conn, fc);
+}
+
+static struct list_head *cuse_conntbl_head(dev_t devt)
+{
+	return &cuse_conntbl[(MAJOR(devt) + MINOR(devt)) % CUSE_CONNTBL_LEN];
+}
+
+
+/**************************************************************************
+ * CUSE frontend operations
+ *
+ * These are file operations for the character device.
+ *
+ * On open, CUSE opens a file from the FUSE mnt and stores it to
+ * private_data of the open file.  All other ops call FUSE ops on the
+ * FUSE file.
+ */
+
+static ssize_t cuse_read(struct file *file, char __user *buf, size_t count,
+			 loff_t *ppos)
+{
+	loff_t pos = 0;
+
+	return fuse_direct_io(file, buf, count, &pos, 0);
+}
+
+static ssize_t cuse_write(struct file *file, const char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	loff_t pos = 0;
+	/*
+	 * No locking or generic_write_checks(), the server is
+	 * responsible for locking and sanity checks.
+	 */
+	return fuse_direct_io(file, buf, count, &pos, 1);
+}
+
+static int cuse_open(struct inode *inode, struct file *file)
+{
+	dev_t devt = inode->i_cdev->dev;
+	struct cuse_conn *cc = NULL, *pos;
+	int rc;
+
+	/* look up and get the connection */
+	spin_lock(&cuse_lock);
+	list_for_each_entry(pos, cuse_conntbl_head(devt), list)
+		if (pos->dev->devt == devt) {
+			fuse_conn_get(&pos->fc);
+			cc = pos;
+			break;
+		}
+	spin_unlock(&cuse_lock);
+
+	/* dead? */
+	if (!cc)
+		return -ENODEV;
+
+	/*
+	 * Generic permission check is already done against the chrdev
+	 * file, proceed to open.
+	 */
+	rc = fuse_do_open(&cc->fc, 0, file, 0);
+	if (rc)
+		fuse_conn_put(&cc->fc);
+	return rc;
+}
+
+static int cuse_release(struct inode *inode, struct file *file)
+{
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
+
+	fuse_sync_release(ff, file->f_flags);
+	fuse_conn_put(fc);
+
+	return 0;
+}
+
+static long cuse_file_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
+{
+	struct fuse_file *ff = file->private_data;
+	struct cuse_conn *cc = fc_to_cc(ff->fc);
+	unsigned int flags = 0;
+
+	if (cc->unrestricted_ioctl)
+		flags |= FUSE_IOCTL_UNRESTRICTED;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
+
+static long cuse_file_compat_ioctl(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	struct fuse_file *ff = file->private_data;
+	struct cuse_conn *cc = fc_to_cc(ff->fc);
+	unsigned int flags = FUSE_IOCTL_COMPAT;
+
+	if (cc->unrestricted_ioctl)
+		flags |= FUSE_IOCTL_UNRESTRICTED;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
+
+static const struct file_operations cuse_frontend_fops = {
+	.owner			= THIS_MODULE,
+	.read			= cuse_read,
+	.write			= cuse_write,
+	.open			= cuse_open,
+	.release		= cuse_release,
+	.unlocked_ioctl		= cuse_file_ioctl,
+	.compat_ioctl		= cuse_file_compat_ioctl,
+	.poll			= fuse_file_poll,
+};
+
+
+/**************************************************************************
+ * CUSE channel initialization and destruction
+ */
+
+struct cuse_devinfo {
+	const char		*name;
+};
+
+/**
+ * cuse_parse_one - parse one key=value pair
+ * @pp: i/o parameter for the current position
+ * @end: points to one past the end of the packed string
+ * @keyp: out parameter for key
+ * @valp: out parameter for value
+ *
+ * *@pp points to packed strings - "key0=val0\0key1=val1\0" which ends
+ * at @end - 1.  This function parses one pair and set *@keyp to the
+ * start of the key and *@valp to the start of the value.  Note that
+ * the original string is modified such that the key string is
+ * terminated with '\0'.  *@pp is updated to point to the next string.
+ *
+ * RETURNS:
+ * 1 on successful parse, 0 on EOF, -errno on failure.
+ */
+static int cuse_parse_one(char **pp, char *end, char **keyp, char **valp)
+{
+	char *p = *pp;
+	char *key, *val;
+
+	while (p < end && *p == '\0')
+		p++;
+	if (p == end)
+		return 0;
+
+	if (end[-1] != '\0') {
+		printk(KERN_ERR "CUSE: info not properly terminated\n");
+		return -EINVAL;
+	}
+
+	key = val = p;
+	p += strlen(p);
+
+	if (valp) {
+		strsep(&val, "=");
+		if (!val)
+			val = key + strlen(key);
+		key = strstrip(key);
+		val = strstrip(val);
+	} else
+		key = strstrip(key);
+
+	if (!strlen(key)) {
+		printk(KERN_ERR "CUSE: zero length info key specified\n");
+		return -EINVAL;
+	}
+
+	*pp = p;
+	*keyp = key;
+	if (valp)
+		*valp = val;
+
+	return 1;
+}
+
+/**
+ * cuse_parse_dev_info - parse device info
+ * @p: device info string
+ * @len: length of device info string
+ * @devinfo: out parameter for parsed device info
+ *
+ * Parse @p to extract device info and store it into @devinfo.  String
+ * pointed to by @p is modified by parsing and @devinfo points into
+ * them, so @p shouldn't be freed while @devinfo is in use.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_parse_devinfo(char *p, size_t len, struct cuse_devinfo *devinfo)
+{
+	char *end = p + len;
+	char *key, *val;
+	int rc;
+
+	while (true) {
+		rc = cuse_parse_one(&p, end, &key, &val);
+		if (rc < 0)
+			return rc;
+		if (!rc)
+			break;
+		if (strcmp(key, "DEVNAME") == 0)
+			devinfo->name = val;
+		else
+			printk(KERN_WARNING "CUSE: unknown device info \"%s\"\n",
+			       key);
+	}
+
+	if (!devinfo->name || !strlen(devinfo->name)) {
+		printk(KERN_ERR "CUSE: DEVNAME unspecified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void cuse_gendev_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+/**
+ * cuse_process_init_reply - finish initializing CUSE channel
+ *
+ * This function creates the character device and sets up all the
+ * required data structures for it.  Please read the comment at the
+ * top of this file for high level overview.
+ */
+static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
+{
+	struct cuse_conn *cc = fc_to_cc(fc);
+	struct cuse_init_out *arg = &req->misc.cuse_init_out;
+	struct page *page = req->pages[0];
+	struct cuse_devinfo devinfo = { };
+	struct device *dev;
+	struct cdev *cdev;
+	dev_t devt;
+	int rc;
+
+	if (req->out.h.error ||
+	    arg->major != FUSE_KERNEL_VERSION || arg->minor < 11) {
+		goto err;
+	}
+
+	fc->minor = arg->minor;
+	fc->max_read = max_t(unsigned, arg->max_read, 4096);
+	fc->max_write = max_t(unsigned, arg->max_write, 4096);
+
+	/* parse init reply */
+	cc->unrestricted_ioctl = arg->flags & CUSE_UNRESTRICTED_IOCTL;
+
+	rc = cuse_parse_devinfo(page_address(page), req->out.args[1].size,
+				&devinfo);
+	if (rc)
+		goto err;
+
+	/* determine and reserve devt */
+	devt = MKDEV(arg->dev_major, arg->dev_minor);
+	if (!MAJOR(devt))
+		rc = alloc_chrdev_region(&devt, MINOR(devt), 1, devinfo.name);
+	else
+		rc = register_chrdev_region(devt, 1, devinfo.name);
+	if (rc) {
+		printk(KERN_ERR "CUSE: failed to register chrdev region\n");
+		goto err;
+	}
+
+	/* devt determined, create device */
+	rc = -ENOMEM;
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto err_region;
+
+	device_initialize(dev);
+	dev_set_uevent_suppress(dev, 1);
+	dev->class = cuse_class;
+	dev->devt = devt;
+	dev->release = cuse_gendev_release;
+	dev_set_drvdata(dev, cc);
+	dev_set_name(dev, "%s", devinfo.name);
+
+	rc = device_add(dev);
+	if (rc)
+		goto err_device;
+
+	/* register cdev */
+	rc = -ENOMEM;
+	cdev = cdev_alloc();
+	if (!cdev)
+		goto err_device;
+
+	cdev->owner = THIS_MODULE;
+	cdev->ops = &cuse_frontend_fops;
+
+	rc = cdev_add(cdev, devt, 1);
+	if (rc)
+		goto err_cdev;
+
+	cc->dev = dev;
+	cc->cdev = cdev;
+
+	/* make the device available */
+	spin_lock(&cuse_lock);
+	list_add(&cc->list, cuse_conntbl_head(devt));
+	spin_unlock(&cuse_lock);
+
+	/* announce device availability */
+	dev_set_uevent_suppress(dev, 0);
+	kobject_uevent(&dev->kobj, KOBJ_ADD);
+out:
+	__free_page(page);
+	return;
+
+err_cdev:
+	cdev_del(cdev);
+err_device:
+	put_device(dev);
+err_region:
+	unregister_chrdev_region(devt, 1);
+err:
+	fc->conn_error = 1;
+	goto out;
+}
+
+static int cuse_send_init(struct cuse_conn *cc)
+{
+	int rc;
+	struct fuse_req *req;
+	struct page *page;
+	struct fuse_conn *fc = &cc->fc;
+	struct cuse_init_in *arg;
+
+	BUILD_BUG_ON(CUSE_INIT_INFO_MAX > PAGE_SIZE);
+
+	req = fuse_get_req(fc);
+	if (IS_ERR(req)) {
+		rc = PTR_ERR(req);
+		goto err;
+	}
+
+	rc = -ENOMEM;
+	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+	if (!page)
+		goto err_put_req;
+
+	arg = &req->misc.cuse_init_in;
+	arg->major = FUSE_KERNEL_VERSION;
+	arg->minor = FUSE_KERNEL_MINOR_VERSION;
+	arg->flags |= CUSE_UNRESTRICTED_IOCTL;
+	req->in.h.opcode = CUSE_INIT;
+	req->in.numargs = 1;
+	req->in.args[0].size = sizeof(struct cuse_init_in);
+	req->in.args[0].value = arg;
+	req->out.numargs = 2;
+	req->out.args[0].size = sizeof(struct cuse_init_out);
+	req->out.args[0].value = &req->misc.cuse_init_out;
+	req->out.args[1].size = CUSE_INIT_INFO_MAX;
+	req->out.argvar = 1;
+	req->out.argpages = 1;
+	req->pages[0] = page;
+	req->num_pages = 1;
+	req->end = cuse_process_init_reply;
+	fuse_request_send_background(fc, req);
+
+	return 0;
+
+err_put_req:
+	fuse_put_request(fc, req);
+err:
+	return rc;
+}
+
+static void cuse_fc_release(struct fuse_conn *fc)
+{
+	struct cuse_conn *cc = fc_to_cc(fc);
+	kfree(cc);
+}
+
+/**
+ * cuse_channel_open - open method for /dev/cuse
+ * @inode: inode for /dev/cuse
+ * @file: file struct being opened
+ *
+ * Userland CUSE server can create a CUSE device by opening /dev/cuse
+ * and replying to the initilaization request kernel sends.  This
+ * function is responsible for handling CUSE device initialization.
+ * Because the fd opened by this function is used during
+ * initialization, this function only creates cuse_conn and sends
+ * init.  The rest is delegated to a kthread.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_channel_open(struct inode *inode, struct file *file)
+{
+	struct cuse_conn *cc;
+	int rc;
+
+	/* set up cuse_conn */
+	cc = kzalloc(sizeof(*cc), GFP_KERNEL);
+	if (!cc)
+		return -ENOMEM;
+
+	fuse_conn_init(&cc->fc);
+
+	INIT_LIST_HEAD(&cc->list);
+	cc->fc.release = cuse_fc_release;
+
+	cc->fc.connected = 1;
+	cc->fc.blocked = 0;
+	rc = cuse_send_init(cc);
+	if (rc) {
+		fuse_conn_put(&cc->fc);
+		return rc;
+	}
+	file->private_data = &cc->fc;	/* channel owns base reference to cc */
+
+	return 0;
+}
+
+/**
+ * cuse_channel_release - release method for /dev/cuse
+ * @inode: inode for /dev/cuse
+ * @file: file struct being closed
+ *
+ * Disconnect the channel, deregister CUSE device and initiate
+ * destruction by putting the default reference.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_channel_release(struct inode *inode, struct file *file)
+{
+	struct cuse_conn *cc = fc_to_cc(file->private_data);
+	int rc;
+
+	/* remove from the conntbl, no more access from this point on */
+	spin_lock(&cuse_lock);
+	list_del_init(&cc->list);
+	spin_unlock(&cuse_lock);
+
+	/* remove device */
+	if (cc->dev)
+		device_unregister(cc->dev);
+	if (cc->cdev) {
+		unregister_chrdev_region(cc->cdev->dev, 1);
+		cdev_del(cc->cdev);
+	}
+
+	/* kill connection and shutdown channel */
+	fuse_conn_kill(&cc->fc);
+	rc = fuse_dev_release(inode, file);	/* puts the base reference */
+
+	return rc;
+}
+
+static struct file_operations cuse_channel_fops; /* initialized during init */
+
+
+/**************************************************************************
+ * Misc stuff and module initializatiion
+ *
+ * CUSE exports the same set of attributes to sysfs as fusectl.
+ */
+
+static ssize_t cuse_class_waiting_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct cuse_conn *cc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", atomic_read(&cc->fc.num_waiting));
+}
+
+static ssize_t cuse_class_abort_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct cuse_conn *cc = dev_get_drvdata(dev);
+
+	fuse_abort_conn(&cc->fc);
+	return count;
+}
+
+static struct device_attribute cuse_class_dev_attrs[] = {
+	__ATTR(waiting, S_IFREG | 0400, cuse_class_waiting_show, NULL),
+	__ATTR(abort, S_IFREG | 0200, NULL, cuse_class_abort_store),
+	{ }
+};
+
+static struct miscdevice cuse_miscdev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "cuse",
+	.fops		= &cuse_channel_fops,
+};
+
+static int __init cuse_init(void)
+{
+	int i, rc;
+
+	/* init conntbl */
+	for (i = 0; i < CUSE_CONNTBL_LEN; i++)
+		INIT_LIST_HEAD(&cuse_conntbl[i]);
+
+	/* inherit and extend fuse_dev_operations */
+	cuse_channel_fops		= fuse_dev_operations;
+	cuse_channel_fops.owner		= THIS_MODULE;
+	cuse_channel_fops.open		= cuse_channel_open;
+	cuse_channel_fops.release	= cuse_channel_release;
+
+	cuse_class = class_create(THIS_MODULE, "cuse");
+	if (IS_ERR(cuse_class))
+		return PTR_ERR(cuse_class);
+
+	cuse_class->dev_attrs = cuse_class_dev_attrs;
+
+	rc = misc_register(&cuse_miscdev);
+	if (rc) {
+		class_destroy(cuse_class);
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit cuse_exit(void)
+{
+	misc_deregister(&cuse_miscdev);
+	class_destroy(cuse_class);
+}
+
+module_init(cuse_init);
+module_exit(cuse_exit);
+
+MODULE_AUTHOR("Tejun Heo <tj@kernel.org>");
+MODULE_DESCRIPTION("Character device in Userspace");
+MODULE_LICENSE("GPL");
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index ba76b68c52f..8fed2ed12f3 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -46,6 +46,7 @@ struct fuse_req *fuse_request_alloc(void)
 		fuse_request_init(req);
 	return req;
 }
+EXPORT_SYMBOL_GPL(fuse_request_alloc);
 
 struct fuse_req *fuse_request_alloc_nofs(void)
 {
@@ -124,6 +125,7 @@ struct fuse_req *fuse_get_req(struct fuse_conn *fc)
 	atomic_dec(&fc->num_waiting);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL_GPL(fuse_get_req);
 
 /*
  * Return request in fuse_file->reserved_req.  However that may
@@ -208,6 +210,7 @@ void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req)
 			fuse_request_free(req);
 	}
 }
+EXPORT_SYMBOL_GPL(fuse_put_request);
 
 static unsigned len_args(unsigned numargs, struct fuse_arg *args)
 {
@@ -282,7 +285,7 @@ __releases(&fc->lock)
 			wake_up_all(&fc->blocked_waitq);
 		}
 		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
-		    fc->connected) {
+		    fc->connected && fc->bdi_initialized) {
 			clear_bdi_congested(&fc->bdi, READ);
 			clear_bdi_congested(&fc->bdi, WRITE);
 		}
@@ -400,6 +403,7 @@ void fuse_request_send(struct fuse_conn *fc, struct fuse_req *req)
 	}
 	spin_unlock(&fc->lock);
 }
+EXPORT_SYMBOL_GPL(fuse_request_send);
 
 static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 					    struct fuse_req *req)
@@ -408,7 +412,8 @@ static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 	fc->num_background++;
 	if (fc->num_background == FUSE_MAX_BACKGROUND)
 		fc->blocked = 1;
-	if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+	if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+	    fc->bdi_initialized) {
 		set_bdi_congested(&fc->bdi, READ);
 		set_bdi_congested(&fc->bdi, WRITE);
 	}
@@ -439,6 +444,7 @@ void fuse_request_send_background(struct fuse_conn *fc, struct fuse_req *req)
 	req->isreply = 1;
 	fuse_request_send_nowait(fc, req);
 }
+EXPORT_SYMBOL_GPL(fuse_request_send_background);
 
 /*
  * Called under fc->lock
@@ -1105,8 +1111,9 @@ void fuse_abort_conn(struct fuse_conn *fc)
 	}
 	spin_unlock(&fc->lock);
 }
+EXPORT_SYMBOL_GPL(fuse_abort_conn);
 
-static int fuse_dev_release(struct inode *inode, struct file *file)
+int fuse_dev_release(struct inode *inode, struct file *file)
 {
 	struct fuse_conn *fc = fuse_get_conn(file);
 	if (fc) {
@@ -1120,6 +1127,7 @@ static int fuse_dev_release(struct inode *inode, struct file *file)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(fuse_dev_release);
 
 static int fuse_dev_fasync(int fd, struct file *file, int on)
 {
@@ -1142,6 +1150,7 @@ const struct file_operations fuse_dev_operations = {
 	.release	= fuse_dev_release,
 	.fasync		= fuse_dev_fasync,
 };
+EXPORT_SYMBOL_GPL(fuse_dev_operations);
 
 static struct miscdevice fuse_miscdevice = {
 	.minor = FUSE_MINOR,
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 8b8eebc5614..b3089a083d3 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -362,19 +362,6 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 }
 
 /*
- * Synchronous release for the case when something goes wrong in CREATE_OPEN
- */
-static void fuse_sync_release(struct fuse_conn *fc, struct fuse_file *ff,
-			      u64 nodeid, int flags)
-{
-	fuse_release_fill(ff, nodeid, flags, FUSE_RELEASE);
-	ff->reserved_req->force = 1;
-	fuse_request_send(fc, ff->reserved_req);
-	fuse_put_request(fc, ff->reserved_req);
-	kfree(ff);
-}
-
-/*
  * Atomic create+open operation
  *
  * If the filesystem doesn't support this, then fall back to separate
@@ -445,12 +432,14 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 		goto out_free_ff;
 
 	fuse_put_request(fc, req);
+	ff->fh = outopen.fh;
+	ff->nodeid = outentry.nodeid;
+	ff->open_flags = outopen.open_flags;
 	inode = fuse_iget(dir->i_sb, outentry.nodeid, outentry.generation,
 			  &outentry.attr, entry_attr_timeout(&outentry), 0);
 	if (!inode) {
 		flags &= ~(O_CREAT | O_EXCL | O_TRUNC);
-		ff->fh = outopen.fh;
-		fuse_sync_release(fc, ff, outentry.nodeid, flags);
+		fuse_sync_release(ff, flags);
 		fuse_send_forget(fc, forget_req, outentry.nodeid, 1);
 		return -ENOMEM;
 	}
@@ -460,11 +449,11 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 	fuse_invalidate_attr(dir);
 	file = lookup_instantiate_filp(nd, entry, generic_file_open);
 	if (IS_ERR(file)) {
-		ff->fh = outopen.fh;
-		fuse_sync_release(fc, ff, outentry.nodeid, flags);
+		fuse_sync_release(ff, flags);
 		return PTR_ERR(file);
 	}
-	fuse_finish_open(inode, file, ff, &outopen);
+	file->private_data = fuse_file_get(ff);
+	fuse_finish_open(inode, file);
 	return 0;
 
  out_free_ff:
@@ -1035,7 +1024,7 @@ static int fuse_readdir(struct file *file, void *dstbuf, filldir_t filldir)
 	req->out.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = page;
-	fuse_read_fill(req, file, inode, file->f_pos, PAGE_SIZE, FUSE_READDIR);
+	fuse_read_fill(req, file, file->f_pos, PAGE_SIZE, FUSE_READDIR);
 	fuse_request_send(fc, req);
 	nbytes = req->out.args[0].size;
 	err = req->out.h.error;
@@ -1101,12 +1090,14 @@ static void fuse_put_link(struct dentry *dentry, struct nameidata *nd, void *c)
 
 static int fuse_dir_open(struct inode *inode, struct file *file)
 {
-	return fuse_open_common(inode, file, 1);
+	return fuse_open_common(inode, file, true);
 }
 
 static int fuse_dir_release(struct inode *inode, struct file *file)
 {
-	return fuse_release_common(inode, file, 1);
+	fuse_release_common(file, FUSE_RELEASEDIR);
+
+	return 0;
 }
 
 static int fuse_dir_fsync(struct file *file, struct dentry *de, int datasync)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 06f30e96567..fce6ce694fd 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -12,13 +12,13 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 static const struct file_operations fuse_direct_io_file_operations;
 
-static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
-			  struct fuse_open_out *outargp)
+static int fuse_send_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+			  int opcode, struct fuse_open_out *outargp)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_open_in inarg;
 	struct fuse_req *req;
 	int err;
@@ -31,8 +31,8 @@ static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
 	inarg.flags = file->f_flags & ~(O_CREAT | O_EXCL | O_NOCTTY);
 	if (!fc->atomic_o_trunc)
 		inarg.flags &= ~O_TRUNC;
-	req->in.h.opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.opcode = opcode;
+	req->in.h.nodeid = nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -49,22 +49,27 @@ static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
 struct fuse_file *fuse_file_alloc(struct fuse_conn *fc)
 {
 	struct fuse_file *ff;
+
 	ff = kmalloc(sizeof(struct fuse_file), GFP_KERNEL);
-	if (ff) {
-		ff->reserved_req = fuse_request_alloc();
-		if (!ff->reserved_req) {
-			kfree(ff);
-			return NULL;
-		} else {
-			INIT_LIST_HEAD(&ff->write_entry);
-			atomic_set(&ff->count, 0);
-			spin_lock(&fc->lock);
-			ff->kh = ++fc->khctr;
-			spin_unlock(&fc->lock);
-		}
-		RB_CLEAR_NODE(&ff->polled_node);
-		init_waitqueue_head(&ff->poll_wait);
+	if (unlikely(!ff))
+		return NULL;
+
+	ff->fc = fc;
+	ff->reserved_req = fuse_request_alloc();
+	if (unlikely(!ff->reserved_req)) {
+		kfree(ff);
+		return NULL;
 	}
+
+	INIT_LIST_HEAD(&ff->write_entry);
+	atomic_set(&ff->count, 0);
+	RB_CLEAR_NODE(&ff->polled_node);
+	init_waitqueue_head(&ff->poll_wait);
+
+	spin_lock(&fc->lock);
+	ff->kh = ++fc->khctr;
+	spin_unlock(&fc->lock);
+
 	return ff;
 }
 
@@ -74,7 +79,7 @@ void fuse_file_free(struct fuse_file *ff)
 	kfree(ff);
 }
 
-static struct fuse_file *fuse_file_get(struct fuse_file *ff)
+struct fuse_file *fuse_file_get(struct fuse_file *ff)
 {
 	atomic_inc(&ff->count);
 	return ff;
@@ -82,40 +87,65 @@ static struct fuse_file *fuse_file_get(struct fuse_file *ff)
 
 static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req)
 {
-	dput(req->misc.release.dentry);
-	mntput(req->misc.release.vfsmount);
+	path_put(&req->misc.release.path);
 }
 
 static void fuse_file_put(struct fuse_file *ff)
 {
 	if (atomic_dec_and_test(&ff->count)) {
 		struct fuse_req *req = ff->reserved_req;
-		struct inode *inode = req->misc.release.dentry->d_inode;
-		struct fuse_conn *fc = get_fuse_conn(inode);
+
 		req->end = fuse_release_end;
-		fuse_request_send_background(fc, req);
+		fuse_request_send_background(ff->fc, req);
 		kfree(ff);
 	}
 }
 
-void fuse_finish_open(struct inode *inode, struct file *file,
-		      struct fuse_file *ff, struct fuse_open_out *outarg)
+int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+		 bool isdir)
 {
-	if (outarg->open_flags & FOPEN_DIRECT_IO)
+	struct fuse_open_out outarg;
+	struct fuse_file *ff;
+	int err;
+	int opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
+
+	ff = fuse_file_alloc(fc);
+	if (!ff)
+		return -ENOMEM;
+
+	err = fuse_send_open(fc, nodeid, file, opcode, &outarg);
+	if (err) {
+		fuse_file_free(ff);
+		return err;
+	}
+
+	if (isdir)
+		outarg.open_flags &= ~FOPEN_DIRECT_IO;
+
+	ff->fh = outarg.fh;
+	ff->nodeid = nodeid;
+	ff->open_flags = outarg.open_flags;
+	file->private_data = fuse_file_get(ff);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fuse_do_open);
+
+void fuse_finish_open(struct inode *inode, struct file *file)
+{
+	struct fuse_file *ff = file->private_data;
+
+	if (ff->open_flags & FOPEN_DIRECT_IO)
 		file->f_op = &fuse_direct_io_file_operations;
-	if (!(outarg->open_flags & FOPEN_KEEP_CACHE))
+	if (!(ff->open_flags & FOPEN_KEEP_CACHE))
 		invalidate_inode_pages2(inode->i_mapping);
-	if (outarg->open_flags & FOPEN_NONSEEKABLE)
+	if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
-	ff->fh = outarg->fh;
-	file->private_data = fuse_file_get(ff);
 }
 
-int fuse_open_common(struct inode *inode, struct file *file, int isdir)
+int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
-	struct fuse_open_out outarg;
-	struct fuse_file *ff;
 	int err;
 
 	/* VFS checks this, but only _after_ ->open() */
@@ -126,78 +156,85 @@ int fuse_open_common(struct inode *inode, struct file *file, int isdir)
 	if (err)
 		return err;
 
-	ff = fuse_file_alloc(fc);
-	if (!ff)
-		return -ENOMEM;
-
-	err = fuse_send_open(inode, file, isdir, &outarg);
+	err = fuse_do_open(fc, get_node_id(inode), file, isdir);
 	if (err)
-		fuse_file_free(ff);
-	else {
-		if (isdir)
-			outarg.open_flags &= ~FOPEN_DIRECT_IO;
-		fuse_finish_open(inode, file, ff, &outarg);
-	}
+		return err;
 
-	return err;
+	fuse_finish_open(inode, file);
+
+	return 0;
 }
 
-void fuse_release_fill(struct fuse_file *ff, u64 nodeid, int flags, int opcode)
+static void fuse_prepare_release(struct fuse_file *ff, int flags, int opcode)
 {
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_req *req = ff->reserved_req;
 	struct fuse_release_in *inarg = &req->misc.release.in;
 
+	spin_lock(&fc->lock);
+	list_del(&ff->write_entry);
+	if (!RB_EMPTY_NODE(&ff->polled_node))
+		rb_erase(&ff->polled_node, &fc->polled_files);
+	spin_unlock(&fc->lock);
+
+	wake_up_interruptible_sync(&ff->poll_wait);
+
 	inarg->fh = ff->fh;
 	inarg->flags = flags;
 	req->in.h.opcode = opcode;
-	req->in.h.nodeid = nodeid;
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(struct fuse_release_in);
 	req->in.args[0].value = inarg;
 }
 
-int fuse_release_common(struct inode *inode, struct file *file, int isdir)
+void fuse_release_common(struct file *file, int opcode)
 {
-	struct fuse_file *ff = file->private_data;
-	if (ff) {
-		struct fuse_conn *fc = get_fuse_conn(inode);
-		struct fuse_req *req = ff->reserved_req;
-
-		fuse_release_fill(ff, get_node_id(inode), file->f_flags,
-				  isdir ? FUSE_RELEASEDIR : FUSE_RELEASE);
+	struct fuse_file *ff;
+	struct fuse_req *req;
 
-		/* Hold vfsmount and dentry until release is finished */
-		req->misc.release.vfsmount = mntget(file->f_path.mnt);
-		req->misc.release.dentry = dget(file->f_path.dentry);
+	ff = file->private_data;
+	if (unlikely(!ff))
+		return;
 
-		spin_lock(&fc->lock);
-		list_del(&ff->write_entry);
-		if (!RB_EMPTY_NODE(&ff->polled_node))
-			rb_erase(&ff->polled_node, &fc->polled_files);
-		spin_unlock(&fc->lock);
+	req = ff->reserved_req;
+	fuse_prepare_release(ff, file->f_flags, opcode);
 
-		wake_up_interruptible_sync(&ff->poll_wait);
-		/*
-		 * Normally this will send the RELEASE request,
-		 * however if some asynchronous READ or WRITE requests
-		 * are outstanding, the sending will be delayed
-		 */
-		fuse_file_put(ff);
-	}
+	/* Hold vfsmount and dentry until release is finished */
+	path_get(&file->f_path);
+	req->misc.release.path = file->f_path;
 
-	/* Return value is ignored by VFS */
-	return 0;
+	/*
+	 * Normally this will send the RELEASE request, however if
+	 * some asynchronous READ or WRITE requests are outstanding,
+	 * the sending will be delayed.
+	 */
+	fuse_file_put(ff);
 }
 
 static int fuse_open(struct inode *inode, struct file *file)
 {
-	return fuse_open_common(inode, file, 0);
+	return fuse_open_common(inode, file, false);
 }
 
 static int fuse_release(struct inode *inode, struct file *file)
 {
-	return fuse_release_common(inode, file, 0);
+	fuse_release_common(file, FUSE_RELEASE);
+
+	/* return value is ignored by VFS */
+	return 0;
+}
+
+void fuse_sync_release(struct fuse_file *ff, int flags)
+{
+	WARN_ON(atomic_read(&ff->count) > 1);
+	fuse_prepare_release(ff, flags, FUSE_RELEASE);
+	ff->reserved_req->force = 1;
+	fuse_request_send(ff->fc, ff->reserved_req);
+	fuse_put_request(ff->fc, ff->reserved_req);
+	kfree(ff);
 }
+EXPORT_SYMBOL_GPL(fuse_sync_release);
 
 /*
  * Scramble the ID space with XTEA, so that the value of the files_struct
@@ -371,8 +408,8 @@ static int fuse_fsync(struct file *file, struct dentry *de, int datasync)
 	return fuse_fsync_common(file, de, datasync, 0);
 }
 
-void fuse_read_fill(struct fuse_req *req, struct file *file,
-		    struct inode *inode, loff_t pos, size_t count, int opcode)
+void fuse_read_fill(struct fuse_req *req, struct file *file, loff_t pos,
+		    size_t count, int opcode)
 {
 	struct fuse_read_in *inarg = &req->misc.read.in;
 	struct fuse_file *ff = file->private_data;
@@ -382,7 +419,7 @@ void fuse_read_fill(struct fuse_req *req, struct file *file,
 	inarg->size = count;
 	inarg->flags = file->f_flags;
 	req->in.h.opcode = opcode;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(struct fuse_read_in);
 	req->in.args[0].value = inarg;
@@ -392,12 +429,12 @@ void fuse_read_fill(struct fuse_req *req, struct file *file,
 }
 
 static size_t fuse_send_read(struct fuse_req *req, struct file *file,
-			     struct inode *inode, loff_t pos, size_t count,
-			     fl_owner_t owner)
+			     loff_t pos, size_t count, fl_owner_t owner)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 
-	fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+	fuse_read_fill(req, file, pos, count, FUSE_READ);
 	if (owner != NULL) {
 		struct fuse_read_in *inarg = &req->misc.read.in;
 
@@ -455,7 +492,7 @@ static int fuse_readpage(struct file *file, struct page *page)
 	req->out.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = page;
-	num_read = fuse_send_read(req, file, inode, pos, count, NULL);
+	num_read = fuse_send_read(req, file, pos, count, NULL);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 
@@ -504,19 +541,18 @@ static void fuse_readpages_end(struct fuse_conn *fc, struct fuse_req *req)
 		fuse_file_put(req->ff);
 }
 
-static void fuse_send_readpages(struct fuse_req *req, struct file *file,
-				struct inode *inode)
+static void fuse_send_readpages(struct fuse_req *req, struct file *file)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 	loff_t pos = page_offset(req->pages[0]);
 	size_t count = req->num_pages << PAGE_CACHE_SHIFT;
 
 	req->out.argpages = 1;
 	req->out.page_zeroing = 1;
-	fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+	fuse_read_fill(req, file, pos, count, FUSE_READ);
 	req->misc.read.attr_ver = fuse_get_attr_version(fc);
 	if (fc->async_read) {
-		struct fuse_file *ff = file->private_data;
 		req->ff = fuse_file_get(ff);
 		req->end = fuse_readpages_end;
 		fuse_request_send_background(fc, req);
@@ -546,7 +582,7 @@ static int fuse_readpages_fill(void *_data, struct page *page)
 	    (req->num_pages == FUSE_MAX_PAGES_PER_REQ ||
 	     (req->num_pages + 1) * PAGE_CACHE_SIZE > fc->max_read ||
 	     req->pages[req->num_pages - 1]->index + 1 != page->index)) {
-		fuse_send_readpages(req, data->file, inode);
+		fuse_send_readpages(req, data->file);
 		data->req = req = fuse_get_req(fc);
 		if (IS_ERR(req)) {
 			unlock_page(page);
@@ -580,7 +616,7 @@ static int fuse_readpages(struct file *file, struct address_space *mapping,
 	err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
 	if (!err) {
 		if (data.req->num_pages)
-			fuse_send_readpages(data.req, file, inode);
+			fuse_send_readpages(data.req, file);
 		else
 			fuse_put_request(fc, data.req);
 	}
@@ -607,24 +643,19 @@ static ssize_t fuse_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
 	return generic_file_aio_read(iocb, iov, nr_segs, pos);
 }
 
-static void fuse_write_fill(struct fuse_req *req, struct file *file,
-			    struct fuse_file *ff, struct inode *inode,
-			    loff_t pos, size_t count, int writepage)
+static void fuse_write_fill(struct fuse_req *req, struct fuse_file *ff,
+			    loff_t pos, size_t count)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_write_in *inarg = &req->misc.write.in;
 	struct fuse_write_out *outarg = &req->misc.write.out;
 
-	memset(inarg, 0, sizeof(struct fuse_write_in));
 	inarg->fh = ff->fh;
 	inarg->offset = pos;
 	inarg->size = count;
-	inarg->write_flags = writepage ? FUSE_WRITE_CACHE : 0;
-	inarg->flags = file ? file->f_flags : 0;
 	req->in.h.opcode = FUSE_WRITE;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 2;
-	if (fc->minor < 9)
+	if (ff->fc->minor < 9)
 		req->in.args[0].size = FUSE_COMPAT_WRITE_IN_SIZE;
 	else
 		req->in.args[0].size = sizeof(struct fuse_write_in);
@@ -636,13 +667,15 @@ static void fuse_write_fill(struct fuse_req *req, struct file *file,
 }
 
 static size_t fuse_send_write(struct fuse_req *req, struct file *file,
-			      struct inode *inode, loff_t pos, size_t count,
-			      fl_owner_t owner)
+			      loff_t pos, size_t count, fl_owner_t owner)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
-	fuse_write_fill(req, file, file->private_data, inode, pos, count, 0);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
+	struct fuse_write_in *inarg = &req->misc.write.in;
+
+	fuse_write_fill(req, ff, pos, count);
+	inarg->flags = file->f_flags;
 	if (owner != NULL) {
-		struct fuse_write_in *inarg = &req->misc.write.in;
 		inarg->write_flags |= FUSE_WRITE_LOCKOWNER;
 		inarg->lock_owner = fuse_lock_owner_id(fc, owner);
 	}
@@ -700,7 +733,7 @@ static int fuse_buffered_write(struct file *file, struct inode *inode,
 	req->num_pages = 1;
 	req->pages[0] = page;
 	req->page_offset = offset;
-	nres = fuse_send_write(req, file, inode, pos, count, NULL);
+	nres = fuse_send_write(req, file, pos, count, NULL);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 	if (!err && !nres)
@@ -741,7 +774,7 @@ static size_t fuse_send_write_pages(struct fuse_req *req, struct file *file,
 	for (i = 0; i < req->num_pages; i++)
 		fuse_wait_on_page_writeback(inode, req->pages[i]->index);
 
-	res = fuse_send_write(req, file, inode, pos, count, NULL);
+	res = fuse_send_write(req, file, pos, count, NULL);
 
 	offset = req->page_offset;
 	count = res;
@@ -979,25 +1012,23 @@ static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
 	return 0;
 }
 
-static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
-			      size_t count, loff_t *ppos, int write)
+ssize_t fuse_direct_io(struct file *file, const char __user *buf,
+		       size_t count, loff_t *ppos, int write)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 	size_t nmax = write ? fc->max_write : fc->max_read;
 	loff_t pos = *ppos;
 	ssize_t res = 0;
 	struct fuse_req *req;
 
-	if (is_bad_inode(inode))
-		return -EIO;
-
 	req = fuse_get_req(fc);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
 	while (count) {
 		size_t nres;
+		fl_owner_t owner = current->files;
 		size_t nbytes = min(count, nmax);
 		int err = fuse_get_user_pages(req, buf, &nbytes, write);
 		if (err) {
@@ -1006,11 +1037,10 @@ static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
 		}
 
 		if (write)
-			nres = fuse_send_write(req, file, inode, pos, nbytes,
-					       current->files);
+			nres = fuse_send_write(req, file, pos, nbytes, owner);
 		else
-			nres = fuse_send_read(req, file, inode, pos, nbytes,
-					      current->files);
+			nres = fuse_send_read(req, file, pos, nbytes, owner);
+
 		fuse_release_user_pages(req, !write);
 		if (req->out.h.error) {
 			if (!res)
@@ -1034,20 +1064,27 @@ static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
 		}
 	}
 	fuse_put_request(fc, req);
-	if (res > 0) {
-		if (write)
-			fuse_write_update_size(inode, pos);
+	if (res > 0)
 		*ppos = pos;
-	}
-	fuse_invalidate_attr(inode);
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(fuse_direct_io);
 
 static ssize_t fuse_direct_read(struct file *file, char __user *buf,
 				     size_t count, loff_t *ppos)
 {
-	return fuse_direct_io(file, buf, count, ppos, 0);
+	ssize_t res;
+	struct inode *inode = file->f_path.dentry->d_inode;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
+	res = fuse_direct_io(file, buf, count, ppos, 0);
+
+	fuse_invalidate_attr(inode);
+
+	return res;
 }
 
 static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
@@ -1055,12 +1092,22 @@ static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
 {
 	struct inode *inode = file->f_path.dentry->d_inode;
 	ssize_t res;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
 	/* Don't allow parallel writes to the same file */
 	mutex_lock(&inode->i_mutex);
 	res = generic_write_checks(file, ppos, &count, 0);
-	if (!res)
+	if (!res) {
 		res = fuse_direct_io(file, buf, count, ppos, 1);
+		if (res > 0)
+			fuse_write_update_size(inode, *ppos);
+	}
 	mutex_unlock(&inode->i_mutex);
+
+	fuse_invalidate_attr(inode);
+
 	return res;
 }
 
@@ -1177,9 +1224,10 @@ static int fuse_writepage_locked(struct page *page)
 	req->ff = fuse_file_get(ff);
 	spin_unlock(&fc->lock);
 
-	fuse_write_fill(req, NULL, ff, inode, page_offset(page), 0, 1);
+	fuse_write_fill(req, ff, page_offset(page), 0);
 
 	copy_highpage(tmp_page, page);
+	req->misc.write.in.write_flags |= FUSE_WRITE_CACHE;
 	req->in.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = tmp_page;
@@ -1603,12 +1651,11 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov,
  * limits ioctl data transfers to well-formed ioctls and is the forced
  * behavior for all FUSE servers.
  */
-static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
-			       unsigned long arg, unsigned int flags)
+long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
+		   unsigned int flags)
 {
-	struct inode *inode = file->f_dentry->d_inode;
 	struct fuse_file *ff = file->private_data;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_ioctl_in inarg = {
 		.fh = ff->fh,
 		.cmd = cmd,
@@ -1627,13 +1674,6 @@ static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
 	/* assume all the iovs returned by client always fits in a page */
 	BUILD_BUG_ON(sizeof(struct iovec) * FUSE_IOCTL_MAX_IOV > PAGE_SIZE);
 
-	if (!fuse_allow_task(fc, current))
-		return -EACCES;
-
-	err = -EIO;
-	if (is_bad_inode(inode))
-		goto out;
-
 	err = -ENOMEM;
 	pages = kzalloc(sizeof(pages[0]) * FUSE_MAX_PAGES_PER_REQ, GFP_KERNEL);
 	iov_page = alloc_page(GFP_KERNEL);
@@ -1694,7 +1734,7 @@ static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
 
 	/* okay, let's send it to the client */
 	req->in.h.opcode = FUSE_IOCTL;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -1777,17 +1817,33 @@ static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
 
 	return err ? err : outarg.result;
 }
+EXPORT_SYMBOL_GPL(fuse_do_ioctl);
+
+static long fuse_file_ioctl_common(struct file *file, unsigned int cmd,
+				   unsigned long arg, unsigned int flags)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct fuse_conn *fc = get_fuse_conn(inode);
+
+	if (!fuse_allow_task(fc, current))
+		return -EACCES;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
 
 static long fuse_file_ioctl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
 {
-	return fuse_file_do_ioctl(file, cmd, arg, 0);
+	return fuse_file_ioctl_common(file, cmd, arg, 0);
 }
 
 static long fuse_file_compat_ioctl(struct file *file, unsigned int cmd,
 				   unsigned long arg)
 {
-	return fuse_file_do_ioctl(file, cmd, arg, FUSE_IOCTL_COMPAT);
+	return fuse_file_ioctl_common(file, cmd, arg, FUSE_IOCTL_COMPAT);
 }
 
 /*
@@ -1841,11 +1897,10 @@ static void fuse_register_polled_file(struct fuse_conn *fc,
 	spin_unlock(&fc->lock);
 }
 
-static unsigned fuse_file_poll(struct file *file, poll_table *wait)
+unsigned fuse_file_poll(struct file *file, poll_table *wait)
 {
-	struct inode *inode = file->f_dentry->d_inode;
 	struct fuse_file *ff = file->private_data;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_poll_in inarg = { .fh = ff->fh, .kh = ff->kh };
 	struct fuse_poll_out outarg;
 	struct fuse_req *req;
@@ -1870,7 +1925,7 @@ static unsigned fuse_file_poll(struct file *file, poll_table *wait)
 		return PTR_ERR(req);
 
 	req->in.h.opcode = FUSE_POLL;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -1889,6 +1944,7 @@ static unsigned fuse_file_poll(struct file *file, poll_table *wait)
 	}
 	return POLLERR;
 }
+EXPORT_SYMBOL_GPL(fuse_file_poll);
 
 /*
  * This is called from fuse_handle_notify() on FUSE_NOTIFY_POLL and
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 6fc5aedaa0d..aaf2f9ff970 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -97,8 +97,13 @@ struct fuse_inode {
 	struct list_head writepages;
 };
 
+struct fuse_conn;
+
 /** FUSE specific file data */
 struct fuse_file {
+	/** Fuse connection for this file */
+	struct fuse_conn *fc;
+
 	/** Request reserved for flush and release */
 	struct fuse_req *reserved_req;
 
@@ -108,9 +113,15 @@ struct fuse_file {
 	/** File handle used by userspace */
 	u64 fh;
 
+	/** Node id of this file */
+	u64 nodeid;
+
 	/** Refcount */
 	atomic_t count;
 
+	/** FOPEN_* flags returned by open */
+	u32 open_flags;
+
 	/** Entry on inode's write_files list */
 	struct list_head write_entry;
 
@@ -185,8 +196,6 @@ enum fuse_req_state {
 	FUSE_REQ_FINISHED
 };
 
-struct fuse_conn;
-
 /**
  * A request to the client
  */
@@ -248,11 +257,12 @@ struct fuse_req {
 		struct fuse_forget_in forget_in;
 		struct {
 			struct fuse_release_in in;
-			struct vfsmount *vfsmount;
-			struct dentry *dentry;
+			struct path path;
 		} release;
 		struct fuse_init_in init_in;
 		struct fuse_init_out init_out;
+		struct cuse_init_in cuse_init_in;
+		struct cuse_init_out cuse_init_out;
 		struct {
 			struct fuse_read_in in;
 			u64 attr_ver;
@@ -386,6 +396,9 @@ struct fuse_conn {
 	/** Filesystem supports NFS exporting.  Only set in INIT */
 	unsigned export_support:1;
 
+	/** Set if bdi is valid */
+	unsigned bdi_initialized:1;
+
 	/*
 	 * The following bitfields are only for optimization purposes
 	 * and hence races in setting them will not cause malfunction
@@ -515,25 +528,24 @@ void fuse_send_forget(struct fuse_conn *fc, struct fuse_req *req,
  * Initialize READ or READDIR request
  */
 void fuse_read_fill(struct fuse_req *req, struct file *file,
-		    struct inode *inode, loff_t pos, size_t count, int opcode);
+		    loff_t pos, size_t count, int opcode);
 
 /**
  * Send OPEN or OPENDIR request
  */
-int fuse_open_common(struct inode *inode, struct file *file, int isdir);
+int fuse_open_common(struct inode *inode, struct file *file, bool isdir);
 
 struct fuse_file *fuse_file_alloc(struct fuse_conn *fc);
+struct fuse_file *fuse_file_get(struct fuse_file *ff);
 void fuse_file_free(struct fuse_file *ff);
-void fuse_finish_open(struct inode *inode, struct file *file,
-		      struct fuse_file *ff, struct fuse_open_out *outarg);
+void fuse_finish_open(struct inode *inode, struct file *file);
 
-/** Fill in ff->reserved_req with a RELEASE request */
-void fuse_release_fill(struct fuse_file *ff, u64 nodeid, int flags, int opcode);
+void fuse_sync_release(struct fuse_file *ff, int flags);
 
 /**
  * Send RELEASE or RELEASEDIR request
  */
-int fuse_release_common(struct inode *inode, struct file *file, int isdir);
+void fuse_release_common(struct file *file, int opcode);
 
 /**
  * Send FSYNC or FSYNCDIR request
@@ -652,10 +664,12 @@ void fuse_invalidate_entry_cache(struct dentry *entry);
  */
 struct fuse_conn *fuse_conn_get(struct fuse_conn *fc);
 
+void fuse_conn_kill(struct fuse_conn *fc);
+
 /**
  * Initialize fuse_conn
  */
-int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb);
+void fuse_conn_init(struct fuse_conn *fc);
 
 /**
  * Release reference to fuse_conn
@@ -694,4 +708,13 @@ void fuse_release_nowrite(struct inode *inode);
 
 u64 fuse_get_attr_version(struct fuse_conn *fc);
 
+int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+		 bool isdir);
+ssize_t fuse_direct_io(struct file *file, const char __user *buf,
+		       size_t count, loff_t *ppos, int write);
+long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
+		   unsigned int flags);
+unsigned fuse_file_poll(struct file *file, poll_table *wait);
+int fuse_dev_release(struct inode *inode, struct file *file);
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 91f7c85f1ff..f0df55a5292 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -277,11 +277,14 @@ static void fuse_send_destroy(struct fuse_conn *fc)
 	}
 }
 
-static void fuse_put_super(struct super_block *sb)
+static void fuse_bdi_destroy(struct fuse_conn *fc)
 {
-	struct fuse_conn *fc = get_fuse_conn_super(sb);
+	if (fc->bdi_initialized)
+		bdi_destroy(&fc->bdi);
+}
 
-	fuse_send_destroy(fc);
+void fuse_conn_kill(struct fuse_conn *fc)
+{
 	spin_lock(&fc->lock);
 	fc->connected = 0;
 	fc->blocked = 0;
@@ -295,7 +298,16 @@ static void fuse_put_super(struct super_block *sb)
 	list_del(&fc->entry);
 	fuse_ctl_remove_conn(fc);
 	mutex_unlock(&fuse_mutex);
-	bdi_destroy(&fc->bdi);
+	fuse_bdi_destroy(fc);
+}
+EXPORT_SYMBOL_GPL(fuse_conn_kill);
+
+static void fuse_put_super(struct super_block *sb)
+{
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+	fuse_send_destroy(fc);
+	fuse_conn_kill(fc);
 	fuse_conn_put(fc);
 }
 
@@ -466,10 +478,8 @@ static int fuse_show_options(struct seq_file *m, struct vfsmount *mnt)
 	return 0;
 }
 
-int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb)
+void fuse_conn_init(struct fuse_conn *fc)
 {
-	int err;
-
 	memset(fc, 0, sizeof(*fc));
 	spin_lock_init(&fc->lock);
 	mutex_init(&fc->inst_mutex);
@@ -484,49 +494,12 @@ int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb)
 	INIT_LIST_HEAD(&fc->bg_queue);
 	INIT_LIST_HEAD(&fc->entry);
 	atomic_set(&fc->num_waiting, 0);
-	fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
-	fc->bdi.unplug_io_fn = default_unplug_io_fn;
-	/* fuse does it's own writeback accounting */
-	fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
 	fc->khctr = 0;
 	fc->polled_files = RB_ROOT;
-	fc->dev = sb->s_dev;
-	err = bdi_init(&fc->bdi);
-	if (err)
-		goto error_mutex_destroy;
-	if (sb->s_bdev) {
-		err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
-				   MAJOR(fc->dev), MINOR(fc->dev));
-	} else {
-		err = bdi_register_dev(&fc->bdi, fc->dev);
-	}
-	if (err)
-		goto error_bdi_destroy;
-	/*
-	 * For a single fuse filesystem use max 1% of dirty +
-	 * writeback threshold.
-	 *
-	 * This gives about 1M of write buffer for memory maps on a
-	 * machine with 1G and 10% dirty_ratio, which should be more
-	 * than enough.
-	 *
-	 * Privileged users can raise it by writing to
-	 *
-	 *    /sys/class/bdi/<bdi>/max_ratio
-	 */
-	bdi_set_max_ratio(&fc->bdi, 1);
 	fc->reqctr = 0;
 	fc->blocked = 1;
 	fc->attr_version = 1;
 	get_random_bytes(&fc->scramble_key, sizeof(fc->scramble_key));
-
-	return 0;
-
- error_bdi_destroy:
-	bdi_destroy(&fc->bdi);
- error_mutex_destroy:
-	mutex_destroy(&fc->inst_mutex);
-	return err;
 }
 EXPORT_SYMBOL_GPL(fuse_conn_init);
 
@@ -539,12 +512,14 @@ void fuse_conn_put(struct fuse_conn *fc)
 		fc->release(fc);
 	}
 }
+EXPORT_SYMBOL_GPL(fuse_conn_put);
 
 struct fuse_conn *fuse_conn_get(struct fuse_conn *fc)
 {
 	atomic_inc(&fc->count);
 	return fc;
 }
+EXPORT_SYMBOL_GPL(fuse_conn_get);
 
 static struct inode *fuse_get_root_inode(struct super_block *sb, unsigned mode)
 {
@@ -797,6 +772,48 @@ static void fuse_free_conn(struct fuse_conn *fc)
 	kfree(fc);
 }
 
+static int fuse_bdi_init(struct fuse_conn *fc, struct super_block *sb)
+{
+	int err;
+
+	fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
+	fc->bdi.unplug_io_fn = default_unplug_io_fn;
+	/* fuse does it's own writeback accounting */
+	fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
+
+	err = bdi_init(&fc->bdi);
+	if (err)
+		return err;
+
+	fc->bdi_initialized = 1;
+
+	if (sb->s_bdev) {
+		err =  bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+				    MAJOR(fc->dev), MINOR(fc->dev));
+	} else {
+		err = bdi_register_dev(&fc->bdi, fc->dev);
+	}
+
+	if (err)
+		return err;
+
+	/*
+	 * For a single fuse filesystem use max 1% of dirty +
+	 * writeback threshold.
+	 *
+	 * This gives about 1M of write buffer for memory maps on a
+	 * machine with 1G and 10% dirty_ratio, which should be more
+	 * than enough.
+	 *
+	 * Privileged users can raise it by writing to
+	 *
+	 *    /sys/class/bdi/<bdi>/max_ratio
+	 */
+	bdi_set_max_ratio(&fc->bdi, 1);
+
+	return 0;
+}
+
 static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct fuse_conn *fc;
@@ -843,11 +860,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	if (!fc)
 		goto err_fput;
 
-	err = fuse_conn_init(fc, sb);
-	if (err) {
-		kfree(fc);
-		goto err_fput;
-	}
+	fuse_conn_init(fc);
+
+	fc->dev = sb->s_dev;
+	err = fuse_bdi_init(fc, sb);
+	if (err)
+		goto err_put_conn;
 
 	fc->release = fuse_free_conn;
 	fc->flags = d.flags;
@@ -911,7 +929,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
  err_put_root:
 	dput(root_dentry);
  err_put_conn:
-	bdi_destroy(&fc->bdi);
+	fuse_bdi_destroy(fc);
 	fuse_conn_put(fc);
  err_fput:
 	fput(file);
diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile
index d53a9bea1c2..3da2f1f4f73 100644
--- a/fs/gfs2/Makefile
+++ b/fs/gfs2/Makefile
@@ -1,3 +1,4 @@
+EXTRA_CFLAGS := -I$(src)
 obj-$(CONFIG_GFS2_FS) += gfs2.o
 gfs2-y := acl.o bmap.o dir.o eaops.o eattr.o glock.o \
 	glops.o inode.o log.o lops.o main.o meta_io.o \
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 329763530dc..6d47379e794 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -25,6 +25,7 @@
 #include "trans.h"
 #include "dir.h"
 #include "util.h"
+#include "trace_gfs2.h"
 
 /* This doesn't need to be that large as max 64 bit pointers in a 4k
  * block is 512, so __u16 is fine for that. It saves stack space to
@@ -589,6 +590,7 @@ int gfs2_block_map(struct inode *inode, sector_t lblock,
 	clear_buffer_mapped(bh_map);
 	clear_buffer_new(bh_map);
 	clear_buffer_boundary(bh_map);
+	trace_gfs2_bmap(ip, bh_map, lblock, create, 1);
 	if (gfs2_is_dir(ip)) {
 		bsize = sdp->sd_jbsize;
 		arr = sdp->sd_jheightsize;
@@ -623,6 +625,7 @@ int gfs2_block_map(struct inode *inode, sector_t lblock,
 	ret = 0;
 out:
 	release_metapath(&mp);
+	trace_gfs2_bmap(ip, bh_map, lblock, create, ret);
 	bmap_unlock(ip, create);
 	return ret;
 
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 2bf62bcc518..297421c0427 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -39,6 +39,8 @@
 #include "super.h"
 #include "util.h"
 #include "bmap.h"
+#define CREATE_TRACE_POINTS
+#include "trace_gfs2.h"
 
 struct gfs2_gl_hash_bucket {
         struct hlist_head hb_list;
@@ -155,7 +157,7 @@ static void glock_free(struct gfs2_glock *gl)
 
 	if (aspace)
 		gfs2_aspace_put(aspace);
-
+	trace_gfs2_glock_put(gl);
 	sdp->sd_lockstruct.ls_ops->lm_put_lock(gfs2_glock_cachep, gl);
 }
 
@@ -317,14 +319,17 @@ restart:
 						return 2;
 					gh->gh_error = ret;
 					list_del_init(&gh->gh_list);
+					trace_gfs2_glock_queue(gh, 0);
 					gfs2_holder_wake(gh);
 					goto restart;
 				}
 				set_bit(HIF_HOLDER, &gh->gh_iflags);
+				trace_gfs2_promote(gh, 1);
 				gfs2_holder_wake(gh);
 				goto restart;
 			}
 			set_bit(HIF_HOLDER, &gh->gh_iflags);
+			trace_gfs2_promote(gh, 0);
 			gfs2_holder_wake(gh);
 			continue;
 		}
@@ -354,6 +359,7 @@ static inline void do_error(struct gfs2_glock *gl, const int ret)
 		else
 			continue;
 		list_del_init(&gh->gh_list);
+		trace_gfs2_glock_queue(gh, 0);
 		gfs2_holder_wake(gh);
 	}
 }
@@ -422,6 +428,7 @@ static void finish_xmote(struct gfs2_glock *gl, unsigned int ret)
 	int rv;
 
 	spin_lock(&gl->gl_spin);
+	trace_gfs2_glock_state_change(gl, state);
 	state_change(gl, state);
 	gh = find_first_waiter(gl);
 
@@ -851,6 +858,7 @@ static void handle_callback(struct gfs2_glock *gl, unsigned int state,
 			gl->gl_demote_state != state) {
 		gl->gl_demote_state = LM_ST_UNLOCKED;
 	}
+	trace_gfs2_demote_rq(gl);
 }
 
 /**
@@ -936,6 +944,7 @@ fail:
 			goto do_cancel;
 		return;
 	}
+	trace_gfs2_glock_queue(gh, 1);
 	list_add_tail(&gh->gh_list, insert_pt);
 do_cancel:
 	gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
@@ -1032,6 +1041,7 @@ void gfs2_glock_dq(struct gfs2_holder *gh)
 		    !test_bit(GLF_DEMOTE, &gl->gl_flags))
 			fast_path = 1;
 	}
+	trace_gfs2_glock_queue(gh, 0);
 	spin_unlock(&gl->gl_spin);
 	if (likely(fast_path))
 		return;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index aa62cf5976e..13c6237c5f6 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -28,6 +28,7 @@
 #include "meta_io.h"
 #include "util.h"
 #include "dir.h"
+#include "trace_gfs2.h"
 
 #define PULL 1
 
@@ -313,6 +314,7 @@ int gfs2_log_reserve(struct gfs2_sbd *sdp, unsigned int blks)
 		gfs2_log_lock(sdp);
 	}
 	atomic_sub(blks, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, -blks);
 	gfs2_log_unlock(sdp);
 	mutex_unlock(&sdp->sd_log_reserve_mutex);
 
@@ -333,6 +335,7 @@ void gfs2_log_release(struct gfs2_sbd *sdp, unsigned int blks)
 
 	gfs2_log_lock(sdp);
 	atomic_add(blks, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, blks);
 	gfs2_assert_withdraw(sdp,
 			     atomic_read(&sdp->sd_log_blks_free) <= sdp->sd_jdesc->jd_blocks);
 	gfs2_log_unlock(sdp);
@@ -558,6 +561,7 @@ static void log_pull_tail(struct gfs2_sbd *sdp, unsigned int new_tail)
 
 	gfs2_log_lock(sdp);
 	atomic_add(dist, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, dist);
 	gfs2_assert_withdraw(sdp, atomic_read(&sdp->sd_log_blks_free) <= sdp->sd_jdesc->jd_blocks);
 	gfs2_log_unlock(sdp);
 
@@ -715,6 +719,7 @@ void __gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl)
 		up_write(&sdp->sd_log_flush_lock);
 		return;
 	}
+	trace_gfs2_log_flush(sdp, 1);
 
 	ai = kzalloc(sizeof(struct gfs2_ail), GFP_NOFS | __GFP_NOFAIL);
 	INIT_LIST_HEAD(&ai->ai_ail1_list);
@@ -746,6 +751,7 @@ void __gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl)
 	else if (sdp->sd_log_tail != current_tail(sdp) && !sdp->sd_log_idle){
 		gfs2_log_lock(sdp);
 		atomic_dec(&sdp->sd_log_blks_free); /* Adjust for unreserved buffer */
+		trace_gfs2_log_blocks(sdp, -1);
 		gfs2_log_unlock(sdp);
 		log_write_header(sdp, 0, PULL);
 	}
@@ -763,8 +769,7 @@ void __gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl)
 		ai = NULL;
 	}
 	gfs2_log_unlock(sdp);
-
-	sdp->sd_vfs->s_dirt = 0;
+	trace_gfs2_log_flush(sdp, 0);
 	up_write(&sdp->sd_log_flush_lock);
 
 	kfree(ai);
@@ -788,6 +793,7 @@ static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 	gfs2_assert_withdraw(sdp, sdp->sd_log_blks_reserved + tr->tr_reserved >= reserved);
 	unused = sdp->sd_log_blks_reserved - reserved + tr->tr_reserved;
 	atomic_add(unused, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, unused);
 	gfs2_assert_withdraw(sdp, atomic_read(&sdp->sd_log_blks_free) <=
 			     sdp->sd_jdesc->jd_blocks);
 	sdp->sd_log_blks_reserved = reserved;
@@ -823,7 +829,6 @@ void gfs2_log_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 	log_refund(sdp, tr);
 	buf_lo_incore_commit(sdp, tr);
 
-	sdp->sd_vfs->s_dirt = 1;
 	up_read(&sdp->sd_log_flush_lock);
 
 	gfs2_log_lock(sdp);
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 00315f50fa4..9969ff062c5 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -27,6 +27,7 @@
 #include "rgrp.h"
 #include "trans.h"
 #include "util.h"
+#include "trace_gfs2.h"
 
 /**
  * gfs2_pin - Pin a buffer in memory
@@ -53,6 +54,7 @@ static void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh)
 	if (bd->bd_ail)
 		list_move(&bd->bd_ail_st_list, &bd->bd_ail->ai_ail2_list);
 	get_bh(bh);
+	trace_gfs2_pin(bd, 1);
 }
 
 /**
@@ -89,6 +91,7 @@ static void gfs2_unpin(struct gfs2_sbd *sdp, struct buffer_head *bh,
 	bd->bd_ail = ai;
 	list_add(&bd->bd_ail_st_list, &ai->ai_ail1_list);
 	clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
+	trace_gfs2_pin(bd, 0);
 	gfs2_log_unlock(sdp);
 	unlock_buffer(bh);
 }
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index cc34f271b3e..7bc3c45cd67 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -33,6 +33,7 @@
 #include "log.h"
 #include "quota.h"
 #include "dir.h"
+#include "trace_gfs2.h"
 
 #define DO 0
 #define UNDO 1
@@ -775,6 +776,7 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
 		/* Map the extents for this journal's blocks */
 		map_journal_extents(sdp);
 	}
+	trace_gfs2_log_blocks(sdp, atomic_read(&sdp->sd_log_blks_free));
 
 	if (sdp->sd_lockstruct.ls_first) {
 		unsigned int x;
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index de3239731db..daa4ae341a2 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -29,6 +29,7 @@
 #include "util.h"
 #include "log.h"
 #include "inode.h"
+#include "trace_gfs2.h"
 
 #define BFITNOENT ((u32)~0)
 #define NO_BLOCK ((u64)~0)
@@ -1519,7 +1520,7 @@ int gfs2_alloc_block(struct gfs2_inode *ip, u64 *bn, unsigned int *n)
 	spin_lock(&sdp->sd_rindex_spin);
 	rgd->rd_free_clone -= *n;
 	spin_unlock(&sdp->sd_rindex_spin);
-
+	trace_gfs2_block_alloc(ip, block, *n, GFS2_BLKST_USED);
 	*bn = block;
 	return 0;
 
@@ -1571,7 +1572,7 @@ u64 gfs2_alloc_di(struct gfs2_inode *dip, u64 *generation)
 	spin_lock(&sdp->sd_rindex_spin);
 	rgd->rd_free_clone--;
 	spin_unlock(&sdp->sd_rindex_spin);
-
+	trace_gfs2_block_alloc(dip, block, 1, GFS2_BLKST_DINODE);
 	return block;
 }
 
@@ -1591,7 +1592,7 @@ void gfs2_free_data(struct gfs2_inode *ip, u64 bstart, u32 blen)
 	rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
 	if (!rgd)
 		return;
-
+	trace_gfs2_block_alloc(ip, bstart, blen, GFS2_BLKST_FREE);
 	rgd->rd_free += blen;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1619,7 +1620,7 @@ void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen)
 	rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
 	if (!rgd)
 		return;
-
+	trace_gfs2_block_alloc(ip, bstart, blen, GFS2_BLKST_FREE);
 	rgd->rd_free += blen;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1642,6 +1643,7 @@ void gfs2_unlink_di(struct inode *inode)
 	rgd = rgblk_free(sdp, blkno, 1, GFS2_BLKST_UNLINKED);
 	if (!rgd)
 		return;
+	trace_gfs2_block_alloc(ip, blkno, 1, GFS2_BLKST_UNLINKED);
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
 	gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
 	gfs2_trans_add_rg(rgd);
@@ -1673,6 +1675,7 @@ static void gfs2_free_uninit_di(struct gfs2_rgrpd *rgd, u64 blkno)
 void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip)
 {
 	gfs2_free_uninit_di(rgd, ip->i_no_addr);
+	trace_gfs2_block_alloc(ip, ip->i_no_addr, 1, GFS2_BLKST_FREE);
 	gfs2_quota_change(ip, -1, ip->i_inode.i_uid, ip->i_inode.i_gid);
 	gfs2_meta_wipe(ip, ip->i_no_addr, 1);
 }
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 40bcc37e5a7..0a680133647 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -788,17 +788,6 @@ restart:
 }
 
 /**
- * gfs2_write_super
- * @sb: the superblock
- *
- */
-
-static void gfs2_write_super(struct super_block *sb)
-{
-	sb->s_dirt = 0;
-}
-
-/**
  * gfs2_sync_fs - sync the filesystem
  * @sb: the superblock
  *
@@ -807,7 +796,6 @@ static void gfs2_write_super(struct super_block *sb)
 
 static int gfs2_sync_fs(struct super_block *sb, int wait)
 {
-	sb->s_dirt = 0;
 	if (wait && sb->s_fs_info)
 		gfs2_log_flush(sb->s_fs_info, NULL);
 	return 0;
@@ -1324,7 +1312,6 @@ const struct super_operations gfs2_super_ops = {
 	.write_inode		= gfs2_write_inode,
 	.delete_inode		= gfs2_delete_inode,
 	.put_super		= gfs2_put_super,
-	.write_super		= gfs2_write_super,
 	.sync_fs		= gfs2_sync_fs,
 	.freeze_fs 		= gfs2_freeze,
 	.unfreeze_fs		= gfs2_unfreeze,
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
new file mode 100644
index 00000000000..98d6ef1c1dc
--- /dev/null
+++ b/fs/gfs2/trace_gfs2.h
@@ -0,0 +1,407 @@
+#if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_GFS2_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+#define TRACE_INCLUDE_FILE trace_gfs2
+
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <linux/dlmconstants.h>
+#include <linux/gfs2_ondisk.h>
+#include "incore.h"
+#include "glock.h"
+
+#define dlm_state_name(nn) { DLM_LOCK_##nn, #nn }
+#define glock_trace_name(x) __print_symbolic(x,		\
+			    dlm_state_name(IV),		\
+			    dlm_state_name(NL),		\
+			    dlm_state_name(CR),		\
+			    dlm_state_name(CW),		\
+			    dlm_state_name(PR),		\
+			    dlm_state_name(PW),		\
+			    dlm_state_name(EX))
+
+#define block_state_name(x) __print_symbolic(x,			\
+			    { GFS2_BLKST_FREE, "free" },	\
+			    { GFS2_BLKST_USED, "used" },	\
+			    { GFS2_BLKST_DINODE, "dinode" },	\
+			    { GFS2_BLKST_UNLINKED, "unlinked" })
+
+#define show_glock_flags(flags) __print_flags(flags, "",	\
+	{(1UL << GLF_LOCK),			"l" },		\
+	{(1UL << GLF_DEMOTE),			"D" },		\
+	{(1UL << GLF_PENDING_DEMOTE),		"d" },		\
+	{(1UL << GLF_DEMOTE_IN_PROGRESS),	"p" },		\
+	{(1UL << GLF_DIRTY),			"y" },		\
+	{(1UL << GLF_LFLUSH),			"f" },		\
+	{(1UL << GLF_INVALIDATE_IN_PROGRESS),	"i" },		\
+	{(1UL << GLF_REPLY_PENDING),		"r" },		\
+	{(1UL << GLF_INITIAL),			"I" },		\
+	{(1UL << GLF_FROZEN),			"F" })
+
+#ifndef NUMPTY
+#define NUMPTY
+static inline u8 glock_trace_state(unsigned int state)
+{
+	switch(state) {
+	case LM_ST_SHARED:
+		return DLM_LOCK_PR;
+	case LM_ST_DEFERRED:
+		return DLM_LOCK_CW;
+	case LM_ST_EXCLUSIVE:
+		return DLM_LOCK_EX;
+	}
+	return DLM_LOCK_NL;
+}
+#endif
+
+/* Section 1 - Locking
+ *
+ * Objectives:
+ * Latency: Remote demote request to state change
+ * Latency: Local lock request to state change
+ * Latency: State change to lock grant
+ * Correctness: Ordering of local lock state vs. I/O requests
+ * Correctness: Responses to remote demote requests
+ */
+
+/* General glock state change (DLM lock request completes) */
+TRACE_EVENT(gfs2_glock_state_change,
+
+	TP_PROTO(const struct gfs2_glock *gl, unsigned int new_state),
+
+	TP_ARGS(gl, new_state),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	u8,	new_state		)
+		__field(	u8,	dmt_state		)
+		__field(	u8,	tgt_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->new_state	= glock_trace_state(new_state);
+		__entry->tgt_state	= glock_trace_state(gl->gl_target);
+		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld state %s to %s tgt:%s dmt:%s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		 (unsigned long long)__entry->glnum,
+		  glock_trace_name(__entry->cur_state),
+		  glock_trace_name(__entry->new_state),
+		  glock_trace_name(__entry->tgt_state),
+		  glock_trace_name(__entry->dmt_state),
+		  show_glock_flags(__entry->flags))
+);
+
+/* State change -> unlocked, glock is being deallocated */
+TRACE_EVENT(gfs2_glock_put,
+
+	TP_PROTO(const struct gfs2_glock *gl),
+
+	TP_ARGS(gl),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld state %s => %s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+                  __entry->gltype, (unsigned long long)__entry->glnum,
+                  glock_trace_name(__entry->cur_state),
+		  glock_trace_name(DLM_LOCK_IV),
+		  show_glock_flags(__entry->flags))
+
+);
+
+/* Callback (local or remote) requesting lock demotion */
+TRACE_EVENT(gfs2_demote_rq,
+
+	TP_PROTO(const struct gfs2_glock *gl),
+
+	TP_ARGS(gl),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	u8,	dmt_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld demote %s to %s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+                  glock_trace_name(__entry->cur_state),
+                  glock_trace_name(__entry->dmt_state),
+		  show_glock_flags(__entry->flags))
+
+);
+
+/* Promotion/grant of a glock */
+TRACE_EVENT(gfs2_promote,
+
+	TP_PROTO(const struct gfs2_holder *gh, int first),
+
+	TP_ARGS(gh, first),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	int,	first			)
+		__field(	u8,	state			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= gh->gh_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum	= gh->gh_gl->gl_name.ln_number;
+		__entry->gltype	= gh->gh_gl->gl_name.ln_type;
+		__entry->first	= first;
+		__entry->state	= glock_trace_state(gh->gh_state);
+	),
+
+	TP_printk("%u,%u glock %u:%llu promote %s %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+		  __entry->first ? "first": "other",
+		  glock_trace_name(__entry->state))
+);
+
+/* Queue/dequeue a lock request */
+TRACE_EVENT(gfs2_glock_queue,
+
+	TP_PROTO(const struct gfs2_holder *gh, int queue),
+
+	TP_ARGS(gh, queue),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	int,	queue			)
+		__field(	u8,	state			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= gh->gh_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum	= gh->gh_gl->gl_name.ln_number;
+		__entry->gltype	= gh->gh_gl->gl_name.ln_type;
+		__entry->queue	= queue;
+		__entry->state	= glock_trace_state(gh->gh_state);
+	),
+
+	TP_printk("%u,%u glock %u:%llu %squeue %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+		  __entry->queue ? "" : "de",
+		  glock_trace_name(__entry->state))
+);
+
+/* Section 2 - Log/journal
+ *
+ * Objectives:
+ * Latency: Log flush time
+ * Correctness: pin/unpin vs. disk I/O ordering
+ * Performance: Log usage stats
+ */
+
+/* Pin/unpin a block in the log */
+TRACE_EVENT(gfs2_pin,
+
+	TP_PROTO(const struct gfs2_bufdata *bd, int pin),
+
+	TP_ARGS(bd, pin),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	pin			)
+		__field(	u32,	len			)
+		__field(	sector_t,	block		)
+		__field(	u64,	ino			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bd->bd_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->pin		= pin;
+		__entry->len		= bd->bd_bh->b_size;
+		__entry->block		= bd->bd_bh->b_blocknr;
+		__entry->ino		= bd->bd_gl->gl_name.ln_number;
+	),
+
+	TP_printk("%u,%u log %s %llu/%lu inode %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->pin ? "pin" : "unpin",
+		  (unsigned long long)__entry->block,
+		  (unsigned long)__entry->len,
+		  (unsigned long long)__entry->ino)
+);
+
+/* Flushing the log */
+TRACE_EVENT(gfs2_log_flush,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, int start),
+
+	TP_ARGS(sdp, start),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	start			)
+		__field(	u64,	log_seq			)
+	),
+
+	TP_fast_assign(
+		__entry->dev            = sdp->sd_vfs->s_dev;
+		__entry->start		= start;
+		__entry->log_seq	= sdp->sd_log_sequence;
+	),
+
+	TP_printk("%u,%u log flush %s %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->start ? "start" : "end",
+		  (unsigned long long)__entry->log_seq)
+);
+
+/* Reserving/releasing blocks in the log */
+TRACE_EVENT(gfs2_log_blocks,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, int blocks),
+
+	TP_ARGS(sdp, blocks),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	blocks			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sdp->sd_vfs->s_dev;
+		__entry->blocks		= blocks;
+	),
+
+	TP_printk("%u,%u log reserve %d", MAJOR(__entry->dev),
+		  MINOR(__entry->dev), __entry->blocks)
+);
+
+/* Section 3 - bmap
+ *
+ * Objectives:
+ * Latency: Bmap request time
+ * Performance: Block allocator tracing
+ * Correctness: Test of disard generation vs. blocks allocated
+ */
+
+/* Map an extent of blocks, possibly a new allocation */
+TRACE_EVENT(gfs2_bmap,
+
+	TP_PROTO(const struct gfs2_inode *ip, const struct buffer_head *bh,
+		sector_t lblock, int create, int errno),
+
+	TP_ARGS(ip, bh, lblock, create, errno),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	sector_t, lblock		)
+		__field(	sector_t, pblock		)
+		__field(	u64,	inum			)
+		__field(	unsigned long, state		)
+		__field(	u32,	len			)
+		__field(	int,	create			)
+		__field(	int,	errno			)
+	),
+
+	TP_fast_assign(
+		__entry->dev            = ip->i_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->lblock		= lblock;
+		__entry->pblock		= buffer_mapped(bh) ?  bh->b_blocknr : 0;
+		__entry->inum		= ip->i_no_addr;
+		__entry->state		= bh->b_state;
+		__entry->len		= bh->b_size;
+		__entry->create		= create;
+		__entry->errno		= errno;
+	),
+
+	TP_printk("%u,%u bmap %llu map %llu/%lu to %llu flags:%08lx %s %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long long)__entry->inum,
+		  (unsigned long long)__entry->lblock,
+		  (unsigned long)__entry->len,
+		  (unsigned long long)__entry->pblock,
+		  __entry->state, __entry->create ? "create " : "nocreate",
+		  __entry->errno)
+);
+
+/* Keep track of blocks as they are allocated/freed */
+TRACE_EVENT(gfs2_block_alloc,
+
+	TP_PROTO(const struct gfs2_inode *ip, u64 block, unsigned len,
+		u8 block_state),
+
+	TP_ARGS(ip, block, len, block_state),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	start			)
+		__field(	u64,	inum			)
+		__field(	u32,	len			)
+		__field(	u8,	block_state		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ip->i_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->start		= block;
+		__entry->inum		= ip->i_no_addr;
+		__entry->len		= len;
+		__entry->block_state	= block_state;
+	),
+
+	TP_printk("%u,%u bmap %llu alloc %llu/%lu %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long long)__entry->inum,
+		  (unsigned long long)__entry->start,
+		  (unsigned long)__entry->len,
+		  block_state_name(__entry->block_state))
+);
+
+#endif /* _TRACE_GFS2_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
+
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index a36bb749926..6f833dc8e91 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -49,11 +49,23 @@ MODULE_LICENSE("GPL");
  */
 static void hfs_write_super(struct super_block *sb)
 {
+	lock_super(sb);
 	sb->s_dirt = 0;
-	if (sb->s_flags & MS_RDONLY)
-		return;
+
 	/* sync everything to the buffers */
+	if (!(sb->s_flags & MS_RDONLY))
+		hfs_mdb_commit(sb);
+	unlock_super(sb);
+}
+
+static int hfs_sync_fs(struct super_block *sb, int wait)
+{
+	lock_super(sb);
 	hfs_mdb_commit(sb);
+	sb->s_dirt = 0;
+	unlock_super(sb);
+
+	return 0;
 }
 
 /*
@@ -65,9 +77,15 @@ static void hfs_write_super(struct super_block *sb)
  */
 static void hfs_put_super(struct super_block *sb)
 {
+	lock_kernel();
+
+	if (sb->s_dirt)
+		hfs_write_super(sb);
 	hfs_mdb_close(sb);
 	/* release the MDB's resources */
 	hfs_mdb_put(sb);
+
+	unlock_kernel();
 }
 
 /*
@@ -164,6 +182,7 @@ static const struct super_operations hfs_super_operations = {
 	.clear_inode	= hfs_clear_inode,
 	.put_super	= hfs_put_super,
 	.write_super	= hfs_write_super,
+	.sync_fs	= hfs_sync_fs,
 	.statfs		= hfs_statfs,
 	.remount_fs     = hfs_remount,
 	.show_options	= hfs_show_options,
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index f2a64020f42..9fc3af0c0da 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -152,15 +152,14 @@ static void hfsplus_clear_inode(struct inode *inode)
 	}
 }
 
-static void hfsplus_write_super(struct super_block *sb)
+static int hfsplus_sync_fs(struct super_block *sb, int wait)
 {
 	struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
 
 	dprint(DBG_SUPER, "hfsplus_write_super\n");
+
+	lock_super(sb);
 	sb->s_dirt = 0;
-	if (sb->s_flags & MS_RDONLY)
-		/* warn? */
-		return;
 
 	vhdr->free_blocks = cpu_to_be32(HFSPLUS_SB(sb).free_blocks);
 	vhdr->next_alloc = cpu_to_be32(HFSPLUS_SB(sb).next_alloc);
@@ -192,6 +191,16 @@ static void hfsplus_write_super(struct super_block *sb)
 		}
 		HFSPLUS_SB(sb).flags &= ~HFSPLUS_SB_WRITEBACKUP;
 	}
+	unlock_super(sb);
+	return 0;
+}
+
+static void hfsplus_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		hfsplus_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static void hfsplus_put_super(struct super_block *sb)
@@ -199,6 +208,11 @@ static void hfsplus_put_super(struct super_block *sb)
 	dprint(DBG_SUPER, "hfsplus_put_super\n");
 	if (!sb->s_fs_info)
 		return;
+
+	lock_kernel();
+
+	if (sb->s_dirt)
+		hfsplus_write_super(sb);
 	if (!(sb->s_flags & MS_RDONLY) && HFSPLUS_SB(sb).s_vhdr) {
 		struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
 
@@ -218,6 +232,8 @@ static void hfsplus_put_super(struct super_block *sb)
 		unload_nls(HFSPLUS_SB(sb).nls);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int hfsplus_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -279,6 +295,7 @@ static const struct super_operations hfsplus_sops = {
 	.clear_inode	= hfsplus_clear_inode,
 	.put_super	= hfsplus_put_super,
 	.write_super	= hfsplus_write_super,
+	.sync_fs	= hfsplus_sync_fs,
 	.statfs		= hfsplus_statfs,
 	.remount_fs	= hfsplus_remount,
 	.show_options	= hfsplus_show_options,
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index fc77965be84..f2feaa06bf2 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -13,6 +13,7 @@
 #include <linux/statfs.h>
 #include <linux/magic.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 
 /* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
 
@@ -99,11 +100,16 @@ int hpfs_stop_cycles(struct super_block *s, int key, int *c1, int *c2,
 static void hpfs_put_super(struct super_block *s)
 {
 	struct hpfs_sb_info *sbi = hpfs_sb(s);
+
+	lock_kernel();
+
 	kfree(sbi->sb_cp_table);
 	kfree(sbi->sb_bmp_dir);
 	unmark_dirty(s);
 	s->s_fs_info = NULL;
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 unsigned hpfs_count_one_bitmap(struct super_block *s, secno secno)
@@ -393,6 +399,8 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 	
 	*flags |= MS_NOATIME;
 	
+	lock_kernel();
+	lock_super(s);
 	uid = sbi->sb_uid; gid = sbi->sb_gid;
 	umask = 0777 & ~sbi->sb_mode;
 	lowercase = sbi->sb_lowercase; conv = sbi->sb_conv;
@@ -425,9 +433,13 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 
 	replace_mount_options(s, new_opts);
 
+	unlock_super(s);
+	unlock_kernel();
 	return 0;
 
 out_err:
+	unlock_super(s);
+	unlock_kernel();
 	kfree(new_opts);
 	return -EINVAL;
 }
diff --git a/fs/inode.c b/fs/inode.c
index bca0c618fdb..f643be565df 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -22,6 +22,7 @@
 #include <linux/cdev.h>
 #include <linux/bootmem.h>
 #include <linux/inotify.h>
+#include <linux/fsnotify.h>
 #include <linux/mount.h>
 #include <linux/async.h>
 
@@ -189,6 +190,10 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
 	inode->i_private = NULL;
 	inode->i_mapping = mapping;
 
+#ifdef CONFIG_FSNOTIFY
+	inode->i_fsnotify_mask = 0;
+#endif
+
 	return inode;
 
 out_free_security:
@@ -221,6 +226,7 @@ void destroy_inode(struct inode *inode)
 	BUG_ON(inode_has_buffers(inode));
 	ima_inode_free(inode);
 	security_inode_free(inode);
+	fsnotify_inode_delete(inode);
 	if (inode->i_sb->s_op->destroy_inode)
 		inode->i_sb->s_op->destroy_inode(inode);
 	else
@@ -252,6 +258,9 @@ void inode_init_once(struct inode *inode)
 	INIT_LIST_HEAD(&inode->inotify_watches);
 	mutex_init(&inode->inotify_mutex);
 #endif
+#ifdef CONFIG_FSNOTIFY
+	INIT_HLIST_HEAD(&inode->i_fsnotify_mark_entries);
+#endif
 }
 EXPORT_SYMBOL(inode_init_once);
 
@@ -398,6 +407,7 @@ int invalidate_inodes(struct super_block *sb)
 	mutex_lock(&iprune_mutex);
 	spin_lock(&inode_lock);
 	inotify_unmount_inodes(&sb->s_inodes);
+	fsnotify_unmount_inodes(&sb->s_inodes);
 	busy = invalidate_list(&sb->s_inodes, &throw_away);
 	spin_unlock(&inode_lock);
 
@@ -1398,7 +1408,7 @@ EXPORT_SYMBOL(touch_atime);
  *	for writeback.  Note that this function is meant exclusively for
  *	usage in the file write path of filesystems, and filesystems may
  *	choose to explicitly ignore update via this function with the
- *	S_NOCTIME inode flag, e.g. for network filesystem where these
+ *	S_NOCMTIME inode flag, e.g. for network filesystem where these
  *	timestamps are handled by the server.
  */
 
@@ -1412,7 +1422,7 @@ void file_update_time(struct file *file)
 	if (IS_NOCMTIME(inode))
 		return;
 
-	err = mnt_want_write(file->f_path.mnt);
+	err = mnt_want_write_file(file);
 	if (err)
 		return;
 
diff --git a/fs/internal.h b/fs/internal.h
index b4dac4fb6b6..d55ef562f0b 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -25,6 +25,8 @@ static inline int sb_is_blkdev_sb(struct super_block *sb)
 	return sb == blockdev_superblock;
 }
 
+extern int __sync_blockdev(struct block_device *bdev, int wait);
+
 #else
 static inline void bdev_cache_init(void)
 {
@@ -34,6 +36,11 @@ static inline int sb_is_blkdev_sb(struct super_block *sb)
 {
 	return 0;
 }
+
+static inline int __sync_blockdev(struct block_device *bdev, int wait)
+{
+	return 0;
+}
 #endif
 
 /*
@@ -66,3 +73,13 @@ extern void __init mnt_init(void);
  * fs_struct.c
  */
 extern void chroot_fs_refs(struct path *, struct path *);
+
+/*
+ * file_table.c
+ */
+extern void mark_files_ro(struct super_block *);
+
+/*
+ * super.c
+ */
+extern int do_remount_sb(struct super_block *, int, void *, int);
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index b4cbe9603c7..068b34b5a10 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -42,11 +42,16 @@ static int isofs_dentry_cmp_ms(struct dentry *dentry, struct qstr *a, struct qst
 static void isofs_put_super(struct super_block *sb)
 {
 	struct isofs_sb_info *sbi = ISOFS_SB(sb);
+
 #ifdef CONFIG_JOLIET
+	lock_kernel();
+
 	if (sbi->s_nls_iocharset) {
 		unload_nls(sbi->s_nls_iocharset);
 		sbi->s_nls_iocharset = NULL;
 	}
+
+	unlock_kernel();
 #endif
 
 	kfree(sbi);
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 249305d65d5..3451a81b214 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -20,6 +20,7 @@
 #include <linux/vmalloc.h>
 #include <linux/vfs.h>
 #include <linux/crc32.h>
+#include <linux/smp_lock.h>
 #include "nodelist.h"
 
 static int jffs2_flash_setup(struct jffs2_sb_info *c);
@@ -387,6 +388,7 @@ int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
 	   This also catches the case where it was stopped and this
 	   is just a remount to restart it.
 	   Flush the writebuffer, if neccecary, else we loose it */
+	lock_kernel();
 	if (!(sb->s_flags & MS_RDONLY)) {
 		jffs2_stop_garbage_collect_thread(c);
 		mutex_lock(&c->alloc_sem);
@@ -399,24 +401,10 @@ int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
 
 	*flags |= MS_NOATIME;
 
+	unlock_kernel();
 	return 0;
 }
 
-void jffs2_write_super (struct super_block *sb)
-{
-	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
-	sb->s_dirt = 0;
-
-	if (sb->s_flags & MS_RDONLY)
-		return;
-
-	D1(printk(KERN_DEBUG "jffs2_write_super()\n"));
-	jffs2_garbage_collect_trigger(c);
-	jffs2_erase_pending_blocks(c, 0);
-	jffs2_flush_wbuf_gc(c, 0);
-}
-
-
 /* jffs2_new_inode: allocate a new inode and inocache, add it to the hash,
    fill in the raw_inode while you're at it. */
 struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_inode *ri)
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 5e194a5c8e2..2228380c47b 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -181,7 +181,6 @@ void jffs2_dirty_inode(struct inode *inode);
 struct inode *jffs2_new_inode (struct inode *dir_i, int mode,
 			       struct jffs2_raw_inode *ri);
 int jffs2_statfs (struct dentry *, struct kstatfs *);
-void jffs2_write_super (struct super_block *);
 int jffs2_remount_fs (struct super_block *, int *, char *);
 int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
 void jffs2_gc_release_inode(struct jffs2_sb_info *c,
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 4c4e18c54a5..07a22caf268 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -53,10 +53,29 @@ static void jffs2_i_init_once(void *foo)
 	inode_init_once(&f->vfs_inode);
 }
 
+static void jffs2_write_super(struct super_block *sb)
+{
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
+
+	lock_super(sb);
+	sb->s_dirt = 0;
+
+	if (!(sb->s_flags & MS_RDONLY)) {
+		D1(printk(KERN_DEBUG "jffs2_write_super()\n"));
+		jffs2_garbage_collect_trigger(c);
+		jffs2_erase_pending_blocks(c, 0);
+		jffs2_flush_wbuf_gc(c, 0);
+	}
+
+	unlock_super(sb);
+}
+
 static int jffs2_sync_fs(struct super_block *sb, int wait)
 {
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
 
+	jffs2_write_super(sb);
+
 	mutex_lock(&c->alloc_sem);
 	jffs2_flush_wbuf_pad(c);
 	mutex_unlock(&c->alloc_sem);
@@ -174,6 +193,11 @@ static void jffs2_put_super (struct super_block *sb)
 
 	D2(printk(KERN_DEBUG "jffs2: jffs2_put_super()\n"));
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		jffs2_write_super(sb);
+
 	mutex_lock(&c->alloc_sem);
 	jffs2_flush_wbuf_pad(c);
 	mutex_unlock(&c->alloc_sem);
@@ -192,6 +216,8 @@ static void jffs2_put_super (struct super_block *sb)
 	if (c->mtd->sync)
 		c->mtd->sync(c->mtd);
 
+	unlock_kernel();
+
 	D1(printk(KERN_DEBUG "jffs2_put_super returning\n"));
 }
 
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index d9b0e92b360..09b1b6ee218 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -32,6 +32,7 @@
 #include <linux/crc32.h>
 #include <asm/uaccess.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 
 #include "jfs_incore.h"
 #include "jfs_filsys.h"
@@ -183,6 +184,9 @@ static void jfs_put_super(struct super_block *sb)
 	int rc;
 
 	jfs_info("In jfs_put_super");
+
+	lock_kernel();
+
 	rc = jfs_umount(sb);
 	if (rc)
 		jfs_err("jfs_umount failed with return code %d", rc);
@@ -195,6 +199,8 @@ static void jfs_put_super(struct super_block *sb)
 	sbi->direct_inode = NULL;
 
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 enum {
@@ -370,19 +376,24 @@ static int jfs_remount(struct super_block *sb, int *flags, char *data)
 	s64 newLVSize = 0;
 	int rc = 0;
 	int flag = JFS_SBI(sb)->flag;
+	int ret;
 
 	if (!parse_options(data, sb, &newLVSize, &flag)) {
 		return -EINVAL;
 	}
+	lock_kernel();
 	if (newLVSize) {
 		if (sb->s_flags & MS_RDONLY) {
 			printk(KERN_ERR
 		  "JFS: resize requires volume to be mounted read-write\n");
+			unlock_kernel();
 			return -EROFS;
 		}
 		rc = jfs_extendfs(sb, newLVSize, 0);
-		if (rc)
+		if (rc) {
+			unlock_kernel();
 			return rc;
+		}
 	}
 
 	if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
@@ -393,23 +404,31 @@ static int jfs_remount(struct super_block *sb, int *flags, char *data)
 		truncate_inode_pages(JFS_SBI(sb)->direct_inode->i_mapping, 0);
 
 		JFS_SBI(sb)->flag = flag;
-		return jfs_mount_rw(sb, 1);
+		ret = jfs_mount_rw(sb, 1);
+		unlock_kernel();
+		return ret;
 	}
 	if ((!(sb->s_flags & MS_RDONLY)) && (*flags & MS_RDONLY)) {
 		rc = jfs_umount_rw(sb);
 		JFS_SBI(sb)->flag = flag;
+		unlock_kernel();
 		return rc;
 	}
 	if ((JFS_SBI(sb)->flag & JFS_NOINTEGRITY) != (flag & JFS_NOINTEGRITY))
 		if (!(sb->s_flags & MS_RDONLY)) {
 			rc = jfs_umount_rw(sb);
-			if (rc)
+			if (rc) {
+				unlock_kernel();
 				return rc;
+			}
 			JFS_SBI(sb)->flag = flag;
-			return jfs_mount_rw(sb, 1);
+			ret = jfs_mount_rw(sb, 1);
+			unlock_kernel();
+			return ret;
 		}
 	JFS_SBI(sb)->flag = flag;
 
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/fs/libfs.c b/fs/libfs.c
index 80046ddf506..ddfa89948c3 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -9,6 +9,8 @@
 #include <linux/vfs.h>
 #include <linux/mutex.h>
 #include <linux/exportfs.h>
+#include <linux/writeback.h>
+#include <linux/buffer_head.h>
 
 #include <asm/uaccess.h>
 
@@ -807,6 +809,29 @@ struct dentry *generic_fh_to_parent(struct super_block *sb, struct fid *fid,
 }
 EXPORT_SYMBOL_GPL(generic_fh_to_parent);
 
+int simple_fsync(struct file *file, struct dentry *dentry, int datasync)
+{
+	struct writeback_control wbc = {
+		.sync_mode = WB_SYNC_ALL,
+		.nr_to_write = 0, /* metadata-only; caller takes care of data */
+	};
+	struct inode *inode = dentry->d_inode;
+	int err;
+	int ret;
+
+	ret = sync_mapping_buffers(inode->i_mapping);
+	if (!(inode->i_state & I_DIRTY))
+		return ret;
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		return ret;
+
+	err = sync_inode(inode, &wbc);
+	if (ret == 0)
+		ret = err;
+	return ret;
+}
+EXPORT_SYMBOL(simple_fsync);
+
 EXPORT_SYMBOL(dcache_dir_close);
 EXPORT_SYMBOL(dcache_dir_lseek);
 EXPORT_SYMBOL(dcache_dir_open);
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index d4946c4c90e..e5f206467e4 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -22,7 +22,7 @@ static int minix_readdir(struct file *, void *, filldir_t);
 const struct file_operations minix_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= minix_readdir,
-	.fsync		= minix_sync_file,
+	.fsync		= simple_fsync,
 };
 
 static inline void dir_put_page(struct page *page)
diff --git a/fs/minix/file.c b/fs/minix/file.c
index 17765f697e5..3eec3e607a8 100644
--- a/fs/minix/file.c
+++ b/fs/minix/file.c
@@ -6,15 +6,12 @@
  *  minix regular file handling primitives
  */
 
-#include <linux/buffer_head.h>		/* for fsync_inode_buffers() */
 #include "minix.h"
 
 /*
  * We have mostly NULLs here: the current defaults are OK for
  * the minix filesystem.
  */
-int minix_sync_file(struct file *, struct dentry *, int);
-
 const struct file_operations minix_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
@@ -22,7 +19,7 @@ const struct file_operations minix_file_operations = {
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
 	.mmap		= generic_file_mmap,
-	.fsync		= minix_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -30,18 +27,3 @@ const struct inode_operations minix_file_inode_operations = {
 	.truncate	= minix_truncate,
 	.getattr	= minix_getattr,
 };
-
-int minix_sync_file(struct file * file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-	
-	err |= minix_sync_inode(inode);
-	return err ? -EIO : 0;
-}
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index daad3c2740d..f91a2369359 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -35,6 +35,8 @@ static void minix_put_super(struct super_block *sb)
 	int i;
 	struct minix_sb_info *sbi = minix_sb(sb);
 
+	lock_kernel();
+
 	if (!(sb->s_flags & MS_RDONLY)) {
 		if (sbi->s_version != MINIX_V3)	 /* s_state is now out from V3 sb */
 			sbi->s_ms->s_state = sbi->s_mount_state;
@@ -49,7 +51,7 @@ static void minix_put_super(struct super_block *sb)
 	sb->s_fs_info = NULL;
 	kfree(sbi);
 
-	return;
+	unlock_kernel();
 }
 
 static struct kmem_cache * minix_inode_cachep;
@@ -554,38 +556,25 @@ static struct buffer_head * V2_minix_update_inode(struct inode * inode)
 	return bh;
 }
 
-static struct buffer_head *minix_update_inode(struct inode *inode)
-{
-	if (INODE_VERSION(inode) == MINIX_V1)
-		return V1_minix_update_inode(inode);
-	else
-		return V2_minix_update_inode(inode);
-}
-
-static int minix_write_inode(struct inode * inode, int wait)
-{
-	brelse(minix_update_inode(inode));
-	return 0;
-}
-
-int minix_sync_inode(struct inode * inode)
+static int minix_write_inode(struct inode *inode, int wait)
 {
 	int err = 0;
 	struct buffer_head *bh;
 
-	bh = minix_update_inode(inode);
-	if (bh && buffer_dirty(bh))
-	{
+	if (INODE_VERSION(inode) == MINIX_V1)
+		bh = V1_minix_update_inode(inode);
+	else
+		bh = V2_minix_update_inode(inode);
+	if (!bh)
+		return -EIO;
+	if (wait && buffer_dirty(bh)) {
 		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh))
-		{
+		if (buffer_req(bh) && !buffer_uptodate(bh)) {
 			printk("IO error syncing minix inode [%s:%08lx]\n",
 				inode->i_sb->s_id, inode->i_ino);
-			err = -1;
+			err = -EIO;
 		}
 	}
-	else if (!bh)
-		err = -1;
 	brelse (bh);
 	return err;
 }
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index e6a0b193bea..cb7fdd11f9a 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -57,7 +57,6 @@ extern int __minix_write_begin(struct file *file, struct address_space *mapping,
 extern void V1_minix_truncate(struct inode *);
 extern void V2_minix_truncate(struct inode *);
 extern void minix_truncate(struct inode *);
-extern int minix_sync_inode(struct inode *);
 extern void minix_set_inode(struct inode *, dev_t);
 extern int V1_minix_get_block(struct inode *, long, struct buffer_head *, int);
 extern int V2_minix_get_block(struct inode *, long, struct buffer_head *, int);
@@ -72,7 +71,6 @@ extern int minix_empty_dir(struct inode*);
 extern void minix_set_link(struct minix_dir_entry*, struct page*, struct inode*);
 extern struct minix_dir_entry *minix_dotdot(struct inode*, struct page**);
 extern ino_t minix_inode_by_name(struct dentry*);
-extern int minix_sync_file(struct file *, struct dentry *, int);
 
 extern const struct inode_operations minix_file_inode_operations;
 extern const struct inode_operations minix_dir_inode_operations;
diff --git a/fs/namei.c b/fs/namei.c
index c82805d088e..527119afb6a 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -552,6 +552,17 @@ static __always_inline int link_path_walk(const char *name, struct nameidata *nd
 	return result;
 }
 
+static __always_inline void set_root(struct nameidata *nd)
+{
+	if (!nd->root.mnt) {
+		struct fs_struct *fs = current->fs;
+		read_lock(&fs->lock);
+		nd->root = fs->root;
+		path_get(&nd->root);
+		read_unlock(&fs->lock);
+	}
+}
+
 static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
 {
 	int res = 0;
@@ -560,14 +571,10 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 		goto fail;
 
 	if (*link == '/') {
-		struct fs_struct *fs = current->fs;
-
+		set_root(nd);
 		path_put(&nd->path);
-
-		read_lock(&fs->lock);
-		nd->path = fs->root;
-		path_get(&fs->root);
-		read_unlock(&fs->lock);
+		nd->path = nd->root;
+		path_get(&nd->root);
 	}
 
 	res = link_path_walk(link, nd);
@@ -668,23 +675,23 @@ loop:
 	return err;
 }
 
-int follow_up(struct vfsmount **mnt, struct dentry **dentry)
+int follow_up(struct path *path)
 {
 	struct vfsmount *parent;
 	struct dentry *mountpoint;
 	spin_lock(&vfsmount_lock);
-	parent=(*mnt)->mnt_parent;
-	if (parent == *mnt) {
+	parent = path->mnt->mnt_parent;
+	if (parent == path->mnt) {
 		spin_unlock(&vfsmount_lock);
 		return 0;
 	}
 	mntget(parent);
-	mountpoint=dget((*mnt)->mnt_mountpoint);
+	mountpoint = dget(path->mnt->mnt_mountpoint);
 	spin_unlock(&vfsmount_lock);
-	dput(*dentry);
-	*dentry = mountpoint;
-	mntput(*mnt);
-	*mnt = parent;
+	dput(path->dentry);
+	path->dentry = mountpoint;
+	mntput(path->mnt);
+	path->mnt = parent;
 	return 1;
 }
 
@@ -695,7 +702,7 @@ static int __follow_mount(struct path *path)
 {
 	int res = 0;
 	while (d_mountpoint(path->dentry)) {
-		struct vfsmount *mounted = lookup_mnt(path->mnt, path->dentry);
+		struct vfsmount *mounted = lookup_mnt(path);
 		if (!mounted)
 			break;
 		dput(path->dentry);
@@ -708,32 +715,32 @@ static int __follow_mount(struct path *path)
 	return res;
 }
 
-static void follow_mount(struct vfsmount **mnt, struct dentry **dentry)
+static void follow_mount(struct path *path)
 {
-	while (d_mountpoint(*dentry)) {
-		struct vfsmount *mounted = lookup_mnt(*mnt, *dentry);
+	while (d_mountpoint(path->dentry)) {
+		struct vfsmount *mounted = lookup_mnt(path);
 		if (!mounted)
 			break;
-		dput(*dentry);
-		mntput(*mnt);
-		*mnt = mounted;
-		*dentry = dget(mounted->mnt_root);
+		dput(path->dentry);
+		mntput(path->mnt);
+		path->mnt = mounted;
+		path->dentry = dget(mounted->mnt_root);
 	}
 }
 
 /* no need for dcache_lock, as serialization is taken care in
  * namespace.c
  */
-int follow_down(struct vfsmount **mnt, struct dentry **dentry)
+int follow_down(struct path *path)
 {
 	struct vfsmount *mounted;
 
-	mounted = lookup_mnt(*mnt, *dentry);
+	mounted = lookup_mnt(path);
 	if (mounted) {
-		dput(*dentry);
-		mntput(*mnt);
-		*mnt = mounted;
-		*dentry = dget(mounted->mnt_root);
+		dput(path->dentry);
+		mntput(path->mnt);
+		path->mnt = mounted;
+		path->dentry = dget(mounted->mnt_root);
 		return 1;
 	}
 	return 0;
@@ -741,19 +748,16 @@ int follow_down(struct vfsmount **mnt, struct dentry **dentry)
 
 static __always_inline void follow_dotdot(struct nameidata *nd)
 {
-	struct fs_struct *fs = current->fs;
+	set_root(nd);
 
 	while(1) {
 		struct vfsmount *parent;
 		struct dentry *old = nd->path.dentry;
 
-                read_lock(&fs->lock);
-		if (nd->path.dentry == fs->root.dentry &&
-		    nd->path.mnt == fs->root.mnt) {
-                        read_unlock(&fs->lock);
+		if (nd->path.dentry == nd->root.dentry &&
+		    nd->path.mnt == nd->root.mnt) {
 			break;
 		}
-                read_unlock(&fs->lock);
 		spin_lock(&dcache_lock);
 		if (nd->path.dentry != nd->path.mnt->mnt_root) {
 			nd->path.dentry = dget(nd->path.dentry->d_parent);
@@ -775,7 +779,7 @@ static __always_inline void follow_dotdot(struct nameidata *nd)
 		mntput(nd->path.mnt);
 		nd->path.mnt = parent;
 	}
-	follow_mount(&nd->path.mnt, &nd->path.dentry);
+	follow_mount(&nd->path);
 }
 
 /*
@@ -1017,25 +1021,23 @@ static int path_walk(const char *name, struct nameidata *nd)
 	return link_path_walk(name, nd);
 }
 
-/* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
-static int do_path_lookup(int dfd, const char *name,
-				unsigned int flags, struct nameidata *nd)
+static int path_init(int dfd, const char *name, unsigned int flags, struct nameidata *nd)
 {
 	int retval = 0;
 	int fput_needed;
 	struct file *file;
-	struct fs_struct *fs = current->fs;
 
 	nd->last_type = LAST_ROOT; /* if there are only slashes... */
 	nd->flags = flags;
 	nd->depth = 0;
+	nd->root.mnt = NULL;
 
 	if (*name=='/') {
-		read_lock(&fs->lock);
-		nd->path = fs->root;
-		path_get(&fs->root);
-		read_unlock(&fs->lock);
+		set_root(nd);
+		nd->path = nd->root;
+		path_get(&nd->root);
 	} else if (dfd == AT_FDCWD) {
+		struct fs_struct *fs = current->fs;
 		read_lock(&fs->lock);
 		nd->path = fs->pwd;
 		path_get(&fs->pwd);
@@ -1063,17 +1065,29 @@ static int do_path_lookup(int dfd, const char *name,
 
 		fput_light(file, fput_needed);
 	}
+	return 0;
 
-	retval = path_walk(name, nd);
+fput_fail:
+	fput_light(file, fput_needed);
+out_fail:
+	return retval;
+}
+
+/* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
+static int do_path_lookup(int dfd, const char *name,
+				unsigned int flags, struct nameidata *nd)
+{
+	int retval = path_init(dfd, name, flags, nd);
+	if (!retval)
+		retval = path_walk(name, nd);
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
 				nd->path.dentry->d_inode))
 		audit_inode(name, nd->path.dentry);
-out_fail:
+	if (nd->root.mnt) {
+		path_put(&nd->root);
+		nd->root.mnt = NULL;
+	}
 	return retval;
-
-fput_fail:
-	fput_light(file, fput_needed);
-	goto out_fail;
 }
 
 int path_lookup(const char *name, unsigned int flags,
@@ -1113,14 +1127,18 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
 	nd->path.dentry = dentry;
 	nd->path.mnt = mnt;
 	path_get(&nd->path);
+	nd->root = nd->path;
+	path_get(&nd->root);
 
 	retval = path_walk(name, nd);
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
 				nd->path.dentry->d_inode))
 		audit_inode(name, nd->path.dentry);
 
-	return retval;
+	path_put(&nd->root);
+	nd->root.mnt = NULL;
 
+	return retval;
 }
 
 /**
@@ -1676,9 +1694,14 @@ struct file *do_filp_open(int dfd, const char *pathname,
 	/*
 	 * Create - we need to know the parent.
 	 */
-	error = do_path_lookup(dfd, pathname, LOOKUP_PARENT, &nd);
+	error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
 	if (error)
 		return ERR_PTR(error);
+	error = path_walk(pathname, &nd);
+	if (error)
+		return ERR_PTR(error);
+	if (unlikely(!audit_dummy_context()))
+		audit_inode(pathname, nd.path.dentry);
 
 	/*
 	 * We have the parent and last component. First of all, check
@@ -1806,6 +1829,8 @@ exit:
 	if (!IS_ERR(nd.intent.open.file))
 		release_open_intent(&nd);
 exit_parent:
+	if (nd.root.mnt)
+		path_put(&nd.root);
 	path_put(&nd.path);
 	return ERR_PTR(error);
 
diff --git a/fs/namespace.c b/fs/namespace.c
index 134d494158d..2dd333b0fe7 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -131,10 +131,20 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 		INIT_LIST_HEAD(&mnt->mnt_share);
 		INIT_LIST_HEAD(&mnt->mnt_slave_list);
 		INIT_LIST_HEAD(&mnt->mnt_slave);
-		atomic_set(&mnt->__mnt_writers, 0);
+#ifdef CONFIG_SMP
+		mnt->mnt_writers = alloc_percpu(int);
+		if (!mnt->mnt_writers)
+			goto out_free_devname;
+#else
+		mnt->mnt_writers = 0;
+#endif
 	}
 	return mnt;
 
+#ifdef CONFIG_SMP
+out_free_devname:
+	kfree(mnt->mnt_devname);
+#endif
 out_free_id:
 	mnt_free_id(mnt);
 out_free_cache:
@@ -171,65 +181,38 @@ int __mnt_is_readonly(struct vfsmount *mnt)
 }
 EXPORT_SYMBOL_GPL(__mnt_is_readonly);
 
-struct mnt_writer {
-	/*
-	 * If holding multiple instances of this lock, they
-	 * must be ordered by cpu number.
-	 */
-	spinlock_t lock;
-	struct lock_class_key lock_class; /* compiles out with !lockdep */
-	unsigned long count;
-	struct vfsmount *mnt;
-} ____cacheline_aligned_in_smp;
-static DEFINE_PER_CPU(struct mnt_writer, mnt_writers);
+static inline void inc_mnt_writers(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	(*per_cpu_ptr(mnt->mnt_writers, smp_processor_id()))++;
+#else
+	mnt->mnt_writers++;
+#endif
+}
 
-static int __init init_mnt_writers(void)
+static inline void dec_mnt_writers(struct vfsmount *mnt)
 {
-	int cpu;
-	for_each_possible_cpu(cpu) {
-		struct mnt_writer *writer = &per_cpu(mnt_writers, cpu);
-		spin_lock_init(&writer->lock);
-		lockdep_set_class(&writer->lock, &writer->lock_class);
-		writer->count = 0;
-	}
-	return 0;
+#ifdef CONFIG_SMP
+	(*per_cpu_ptr(mnt->mnt_writers, smp_processor_id()))--;
+#else
+	mnt->mnt_writers--;
+#endif
 }
-fs_initcall(init_mnt_writers);
 
-static void unlock_mnt_writers(void)
+static unsigned int count_mnt_writers(struct vfsmount *mnt)
 {
+#ifdef CONFIG_SMP
+	unsigned int count = 0;
 	int cpu;
-	struct mnt_writer *cpu_writer;
 
 	for_each_possible_cpu(cpu) {
-		cpu_writer = &per_cpu(mnt_writers, cpu);
-		spin_unlock(&cpu_writer->lock);
+		count += *per_cpu_ptr(mnt->mnt_writers, cpu);
 	}
-}
 
-static inline void __clear_mnt_count(struct mnt_writer *cpu_writer)
-{
-	if (!cpu_writer->mnt)
-		return;
-	/*
-	 * This is in case anyone ever leaves an invalid,
-	 * old ->mnt and a count of 0.
-	 */
-	if (!cpu_writer->count)
-		return;
-	atomic_add(cpu_writer->count, &cpu_writer->mnt->__mnt_writers);
-	cpu_writer->count = 0;
-}
- /*
- * must hold cpu_writer->lock
- */
-static inline void use_cpu_writer_for_mount(struct mnt_writer *cpu_writer,
-					  struct vfsmount *mnt)
-{
-	if (cpu_writer->mnt == mnt)
-		return;
-	__clear_mnt_count(cpu_writer);
-	cpu_writer->mnt = mnt;
+	return count;
+#else
+	return mnt->mnt_writers;
+#endif
 }
 
 /*
@@ -253,74 +236,73 @@ static inline void use_cpu_writer_for_mount(struct mnt_writer *cpu_writer,
 int mnt_want_write(struct vfsmount *mnt)
 {
 	int ret = 0;
-	struct mnt_writer *cpu_writer;
 
-	cpu_writer = &get_cpu_var(mnt_writers);
-	spin_lock(&cpu_writer->lock);
+	preempt_disable();
+	inc_mnt_writers(mnt);
+	/*
+	 * The store to inc_mnt_writers must be visible before we pass
+	 * MNT_WRITE_HOLD loop below, so that the slowpath can see our
+	 * incremented count after it has set MNT_WRITE_HOLD.
+	 */
+	smp_mb();
+	while (mnt->mnt_flags & MNT_WRITE_HOLD)
+		cpu_relax();
+	/*
+	 * After the slowpath clears MNT_WRITE_HOLD, mnt_is_readonly will
+	 * be set to match its requirements. So we must not load that until
+	 * MNT_WRITE_HOLD is cleared.
+	 */
+	smp_rmb();
 	if (__mnt_is_readonly(mnt)) {
+		dec_mnt_writers(mnt);
 		ret = -EROFS;
 		goto out;
 	}
-	use_cpu_writer_for_mount(cpu_writer, mnt);
-	cpu_writer->count++;
 out:
-	spin_unlock(&cpu_writer->lock);
-	put_cpu_var(mnt_writers);
+	preempt_enable();
 	return ret;
 }
 EXPORT_SYMBOL_GPL(mnt_want_write);
 
-static void lock_mnt_writers(void)
-{
-	int cpu;
-	struct mnt_writer *cpu_writer;
-
-	for_each_possible_cpu(cpu) {
-		cpu_writer = &per_cpu(mnt_writers, cpu);
-		spin_lock(&cpu_writer->lock);
-		__clear_mnt_count(cpu_writer);
-		cpu_writer->mnt = NULL;
-	}
+/**
+ * mnt_clone_write - get write access to a mount
+ * @mnt: the mount on which to take a write
+ *
+ * This is effectively like mnt_want_write, except
+ * it must only be used to take an extra write reference
+ * on a mountpoint that we already know has a write reference
+ * on it. This allows some optimisation.
+ *
+ * After finished, mnt_drop_write must be called as usual to
+ * drop the reference.
+ */
+int mnt_clone_write(struct vfsmount *mnt)
+{
+	/* superblock may be r/o */
+	if (__mnt_is_readonly(mnt))
+		return -EROFS;
+	preempt_disable();
+	inc_mnt_writers(mnt);
+	preempt_enable();
+	return 0;
 }
+EXPORT_SYMBOL_GPL(mnt_clone_write);
 
-/*
- * These per-cpu write counts are not guaranteed to have
- * matched increments and decrements on any given cpu.
- * A file open()ed for write on one cpu and close()d on
- * another cpu will imbalance this count.  Make sure it
- * does not get too far out of whack.
+/**
+ * mnt_want_write_file - get write access to a file's mount
+ * @file: the file who's mount on which to take a write
+ *
+ * This is like mnt_want_write, but it takes a file and can
+ * do some optimisations if the file is open for write already
  */
-static void handle_write_count_underflow(struct vfsmount *mnt)
+int mnt_want_write_file(struct file *file)
 {
-	if (atomic_read(&mnt->__mnt_writers) >=
-	    MNT_WRITER_UNDERFLOW_LIMIT)
-		return;
-	/*
-	 * It isn't necessary to hold all of the locks
-	 * at the same time, but doing it this way makes
-	 * us share a lot more code.
-	 */
-	lock_mnt_writers();
-	/*
-	 * vfsmount_lock is for mnt_flags.
-	 */
-	spin_lock(&vfsmount_lock);
-	/*
-	 * If coalescing the per-cpu writer counts did not
-	 * get us back to a positive writer count, we have
-	 * a bug.
-	 */
-	if ((atomic_read(&mnt->__mnt_writers) < 0) &&
-	    !(mnt->mnt_flags & MNT_IMBALANCED_WRITE_COUNT)) {
-		WARN(1, KERN_DEBUG "leak detected on mount(%p) writers "
-				"count: %d\n",
-			mnt, atomic_read(&mnt->__mnt_writers));
-		/* use the flag to keep the dmesg spam down */
-		mnt->mnt_flags |= MNT_IMBALANCED_WRITE_COUNT;
-	}
-	spin_unlock(&vfsmount_lock);
-	unlock_mnt_writers();
+	if (!(file->f_mode & FMODE_WRITE))
+		return mnt_want_write(file->f_path.mnt);
+	else
+		return mnt_clone_write(file->f_path.mnt);
 }
+EXPORT_SYMBOL_GPL(mnt_want_write_file);
 
 /**
  * mnt_drop_write - give up write access to a mount
@@ -332,37 +314,9 @@ static void handle_write_count_underflow(struct vfsmount *mnt)
  */
 void mnt_drop_write(struct vfsmount *mnt)
 {
-	int must_check_underflow = 0;
-	struct mnt_writer *cpu_writer;
-
-	cpu_writer = &get_cpu_var(mnt_writers);
-	spin_lock(&cpu_writer->lock);
-
-	use_cpu_writer_for_mount(cpu_writer, mnt);
-	if (cpu_writer->count > 0) {
-		cpu_writer->count--;
-	} else {
-		must_check_underflow = 1;
-		atomic_dec(&mnt->__mnt_writers);
-	}
-
-	spin_unlock(&cpu_writer->lock);
-	/*
-	 * Logically, we could call this each time,
-	 * but the __mnt_writers cacheline tends to
-	 * be cold, and makes this expensive.
-	 */
-	if (must_check_underflow)
-		handle_write_count_underflow(mnt);
-	/*
-	 * This could be done right after the spinlock
-	 * is taken because the spinlock keeps us on
-	 * the cpu, and disables preemption.  However,
-	 * putting it here bounds the amount that
-	 * __mnt_writers can underflow.  Without it,
-	 * we could theoretically wrap __mnt_writers.
-	 */
-	put_cpu_var(mnt_writers);
+	preempt_disable();
+	dec_mnt_writers(mnt);
+	preempt_enable();
 }
 EXPORT_SYMBOL_GPL(mnt_drop_write);
 
@@ -370,24 +324,41 @@ static int mnt_make_readonly(struct vfsmount *mnt)
 {
 	int ret = 0;
 
-	lock_mnt_writers();
+	spin_lock(&vfsmount_lock);
+	mnt->mnt_flags |= MNT_WRITE_HOLD;
 	/*
-	 * With all the locks held, this value is stable
+	 * After storing MNT_WRITE_HOLD, we'll read the counters. This store
+	 * should be visible before we do.
 	 */
-	if (atomic_read(&mnt->__mnt_writers) > 0) {
-		ret = -EBUSY;
-		goto out;
-	}
+	smp_mb();
+
 	/*
-	 * nobody can do a successful mnt_want_write() with all
-	 * of the counts in MNT_DENIED_WRITE and the locks held.
+	 * With writers on hold, if this value is zero, then there are
+	 * definitely no active writers (although held writers may subsequently
+	 * increment the count, they'll have to wait, and decrement it after
+	 * seeing MNT_READONLY).
+	 *
+	 * It is OK to have counter incremented on one CPU and decremented on
+	 * another: the sum will add up correctly. The danger would be when we
+	 * sum up each counter, if we read a counter before it is incremented,
+	 * but then read another CPU's count which it has been subsequently
+	 * decremented from -- we would see more decrements than we should.
+	 * MNT_WRITE_HOLD protects against this scenario, because
+	 * mnt_want_write first increments count, then smp_mb, then spins on
+	 * MNT_WRITE_HOLD, so it can't be decremented by another CPU while
+	 * we're counting up here.
 	 */
-	spin_lock(&vfsmount_lock);
-	if (!ret)
+	if (count_mnt_writers(mnt) > 0)
+		ret = -EBUSY;
+	else
 		mnt->mnt_flags |= MNT_READONLY;
+	/*
+	 * MNT_READONLY must become visible before ~MNT_WRITE_HOLD, so writers
+	 * that become unheld will see MNT_READONLY.
+	 */
+	smp_wmb();
+	mnt->mnt_flags &= ~MNT_WRITE_HOLD;
 	spin_unlock(&vfsmount_lock);
-out:
-	unlock_mnt_writers();
 	return ret;
 }
 
@@ -410,6 +381,9 @@ void free_vfsmnt(struct vfsmount *mnt)
 {
 	kfree(mnt->mnt_devname);
 	mnt_free_id(mnt);
+#ifdef CONFIG_SMP
+	free_percpu(mnt->mnt_writers);
+#endif
 	kmem_cache_free(mnt_cache, mnt);
 }
 
@@ -442,11 +416,11 @@ struct vfsmount *__lookup_mnt(struct vfsmount *mnt, struct dentry *dentry,
  * lookup_mnt increments the ref count before returning
  * the vfsmount struct.
  */
-struct vfsmount *lookup_mnt(struct vfsmount *mnt, struct dentry *dentry)
+struct vfsmount *lookup_mnt(struct path *path)
 {
 	struct vfsmount *child_mnt;
 	spin_lock(&vfsmount_lock);
-	if ((child_mnt = __lookup_mnt(mnt, dentry, 1)))
+	if ((child_mnt = __lookup_mnt(path->mnt, path->dentry, 1)))
 		mntget(child_mnt);
 	spin_unlock(&vfsmount_lock);
 	return child_mnt;
@@ -604,38 +578,18 @@ static struct vfsmount *clone_mnt(struct vfsmount *old, struct dentry *root,
 
 static inline void __mntput(struct vfsmount *mnt)
 {
-	int cpu;
 	struct super_block *sb = mnt->mnt_sb;
 	/*
-	 * We don't have to hold all of the locks at the
-	 * same time here because we know that we're the
-	 * last reference to mnt and that no new writers
-	 * can come in.
-	 */
-	for_each_possible_cpu(cpu) {
-		struct mnt_writer *cpu_writer = &per_cpu(mnt_writers, cpu);
-		spin_lock(&cpu_writer->lock);
-		if (cpu_writer->mnt != mnt) {
-			spin_unlock(&cpu_writer->lock);
-			continue;
-		}
-		atomic_add(cpu_writer->count, &mnt->__mnt_writers);
-		cpu_writer->count = 0;
-		/*
-		 * Might as well do this so that no one
-		 * ever sees the pointer and expects
-		 * it to be valid.
-		 */
-		cpu_writer->mnt = NULL;
-		spin_unlock(&cpu_writer->lock);
-	}
-	/*
 	 * This probably indicates that somebody messed
 	 * up a mnt_want/drop_write() pair.  If this
 	 * happens, the filesystem was probably unable
 	 * to make r/w->r/o transitions.
 	 */
-	WARN_ON(atomic_read(&mnt->__mnt_writers));
+	/*
+	 * atomic_dec_and_lock() used to deal with ->mnt_count decrements
+	 * provides barriers, so count_mnt_writers() below is safe.  AV
+	 */
+	WARN_ON(count_mnt_writers(mnt));
 	dput(mnt->mnt_root);
 	free_vfsmnt(mnt);
 	deactivate_super(sb);
@@ -1106,11 +1060,8 @@ static int do_umount(struct vfsmount *mnt, int flags)
 		 * we just try to remount it readonly.
 		 */
 		down_write(&sb->s_umount);
-		if (!(sb->s_flags & MS_RDONLY)) {
-			lock_kernel();
+		if (!(sb->s_flags & MS_RDONLY))
 			retval = do_remount_sb(sb, MS_RDONLY, NULL, 0);
-			unlock_kernel();
-		}
 		up_write(&sb->s_umount);
 		return retval;
 	}
@@ -1253,11 +1204,11 @@ Enomem:
 	return NULL;
 }
 
-struct vfsmount *collect_mounts(struct vfsmount *mnt, struct dentry *dentry)
+struct vfsmount *collect_mounts(struct path *path)
 {
 	struct vfsmount *tree;
 	down_write(&namespace_sem);
-	tree = copy_tree(mnt, dentry, CL_COPY_ALL | CL_PRIVATE);
+	tree = copy_tree(path->mnt, path->dentry, CL_COPY_ALL | CL_PRIVATE);
 	up_write(&namespace_sem);
 	return tree;
 }
@@ -1430,7 +1381,7 @@ static int graft_tree(struct vfsmount *mnt, struct path *path)
 		goto out_unlock;
 
 	err = -ENOENT;
-	if (IS_ROOT(path->dentry) || !d_unhashed(path->dentry))
+	if (!d_unlinked(path->dentry))
 		err = attach_recursive_mnt(mnt, path, NULL);
 out_unlock:
 	mutex_unlock(&path->dentry->d_inode->i_mutex);
@@ -1601,7 +1552,7 @@ static int do_move_mount(struct path *path, char *old_name)
 
 	down_write(&namespace_sem);
 	while (d_mountpoint(path->dentry) &&
-	       follow_down(&path->mnt, &path->dentry))
+	       follow_down(path))
 		;
 	err = -EINVAL;
 	if (!check_mnt(path->mnt) || !check_mnt(old_path.mnt))
@@ -1612,7 +1563,7 @@ static int do_move_mount(struct path *path, char *old_name)
 	if (IS_DEADDIR(path->dentry->d_inode))
 		goto out1;
 
-	if (!IS_ROOT(path->dentry) && d_unhashed(path->dentry))
+	if (d_unlinked(path->dentry))
 		goto out1;
 
 	err = -EINVAL;
@@ -1676,7 +1627,9 @@ static int do_new_mount(struct path *path, char *type, int flags,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
+	lock_kernel();
 	mnt = do_kern_mount(type, flags, name, data);
+	unlock_kernel();
 	if (IS_ERR(mnt))
 		return PTR_ERR(mnt);
 
@@ -1695,10 +1648,10 @@ int do_add_mount(struct vfsmount *newmnt, struct path *path,
 	down_write(&namespace_sem);
 	/* Something was mounted here while we slept */
 	while (d_mountpoint(path->dentry) &&
-	       follow_down(&path->mnt, &path->dentry))
+	       follow_down(path))
 		;
 	err = -EINVAL;
-	if (!check_mnt(path->mnt))
+	if (!(mnt_flags & MNT_SHRINKABLE) && !check_mnt(path->mnt))
 		goto unlock;
 
 	/* Refuse the same filesystem on the same mount point */
@@ -2092,10 +2045,8 @@ SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
 	if (retval < 0)
 		goto out3;
 
-	lock_kernel();
 	retval = do_mount((char *)dev_page, dir_page, (char *)type_page,
 			  flags, (void *)data_page);
-	unlock_kernel();
 	free_page(data_page);
 
 out3:
@@ -2175,9 +2126,9 @@ SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
 	error = -ENOENT;
 	if (IS_DEADDIR(new.dentry->d_inode))
 		goto out2;
-	if (d_unhashed(new.dentry) && !IS_ROOT(new.dentry))
+	if (d_unlinked(new.dentry))
 		goto out2;
-	if (d_unhashed(old.dentry) && !IS_ROOT(old.dentry))
+	if (d_unlinked(old.dentry))
 		goto out2;
 	error = -EBUSY;
 	if (new.mnt == root.mnt ||
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index d642f0e5b36..b99ce205b1b 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -736,6 +736,8 @@ static void ncp_put_super(struct super_block *sb)
 {
 	struct ncp_server *server = NCP_SBP(sb);
 
+	lock_kernel();
+
 	ncp_lock_server(server);
 	ncp_disconnect(server);
 	ncp_unlock_server(server);
@@ -769,6 +771,8 @@ static void ncp_put_super(struct super_block *sb)
 	vfree(server->packet);
 	sb->s_fs_info = NULL;
 	kfree(server);
+
+	unlock_kernel();
 }
 
 static int ncp_statfs(struct dentry *dentry, struct kstatfs *buf)
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 64a288ee046..f01caec8446 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -154,7 +154,7 @@ out_err:
 	goto out;
 out_follow:
 	while (d_mountpoint(nd->path.dentry) &&
-	       follow_down(&nd->path.mnt, &nd->path.dentry))
+	       follow_down(&nd->path))
 		;
 	err = 0;
 	goto out;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index d2d67781c57..26127b69a27 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1813,6 +1813,7 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	if (data == NULL)
 		return -ENOMEM;
 
+	lock_kernel();
 	/* fill out struct with values from existing mount */
 	data->flags = nfss->flags;
 	data->rsize = nfss->rsize;
@@ -1837,6 +1838,7 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	error = nfs_compare_remount_data(nfss, data);
 out:
 	kfree(data);
+	unlock_kernel();
 	return error;
 }
 
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 5839b229cd0..8b1f8efb469 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -847,9 +847,8 @@ exp_get_fsid_key(svc_client *clp, int fsid)
 	return exp_find_key(clp, FSID_NUM, fsidv, NULL);
 }
 
-static svc_export *exp_get_by_name(svc_client *clp, struct vfsmount *mnt,
-				   struct dentry *dentry,
-				   struct cache_req *reqp)
+static svc_export *exp_get_by_name(svc_client *clp, const struct path *path,
+				     struct cache_req *reqp)
 {
 	struct svc_export *exp, key;
 	int err;
@@ -858,8 +857,7 @@ static svc_export *exp_get_by_name(svc_client *clp, struct vfsmount *mnt,
 		return ERR_PTR(-ENOENT);
 
 	key.ex_client = clp;
-	key.ex_path.mnt = mnt;
-	key.ex_path.dentry = dentry;
+	key.ex_path = *path;
 
 	exp = svc_export_lookup(&key);
 	if (exp == NULL)
@@ -873,24 +871,19 @@ static svc_export *exp_get_by_name(svc_client *clp, struct vfsmount *mnt,
 /*
  * Find the export entry for a given dentry.
  */
-static struct svc_export *exp_parent(svc_client *clp, struct vfsmount *mnt,
-				     struct dentry *dentry,
-				     struct cache_req *reqp)
+static struct svc_export *exp_parent(svc_client *clp, struct path *path)
 {
-	svc_export *exp;
-
-	dget(dentry);
-	exp = exp_get_by_name(clp, mnt, dentry, reqp);
-
-	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(dentry)) {
-		struct dentry *parent;
-
-		parent = dget_parent(dentry);
-		dput(dentry);
-		dentry = parent;
-		exp = exp_get_by_name(clp, mnt, dentry, reqp);
+	struct dentry *saved = dget(path->dentry);
+	svc_export *exp = exp_get_by_name(clp, path, NULL);
+
+	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(path->dentry)) {
+		struct dentry *parent = dget_parent(path->dentry);
+		dput(path->dentry);
+		path->dentry = parent;
+		exp = exp_get_by_name(clp, path, NULL);
 	}
-	dput(dentry);
+	dput(path->dentry);
+	path->dentry = saved;
 	return exp;
 }
 
@@ -1018,7 +1011,7 @@ exp_export(struct nfsctl_export *nxp)
 		goto out_put_clp;
 	err = -EINVAL;
 
-	exp = exp_get_by_name(clp, path.mnt, path.dentry, NULL);
+	exp = exp_get_by_name(clp, &path, NULL);
 
 	memset(&new, 0, sizeof(new));
 
@@ -1135,7 +1128,7 @@ exp_unexport(struct nfsctl_export *nxp)
 		goto out_domain;
 
 	err = -EINVAL;
-	exp = exp_get_by_name(dom, path.mnt, path.dentry, NULL);
+	exp = exp_get_by_name(dom, &path, NULL);
 	path_put(&path);
 	if (IS_ERR(exp))
 		goto out_domain;
@@ -1177,7 +1170,7 @@ exp_rootfh(svc_client *clp, char *name, struct knfsd_fh *f, int maxsize)
 	dprintk("nfsd: exp_rootfh(%s [%p] %s:%s/%ld)\n",
 		 name, path.dentry, clp->name,
 		 inode->i_sb->s_id, inode->i_ino);
-	exp = exp_parent(clp, path.mnt, path.dentry, NULL);
+	exp = exp_parent(clp, &path);
 	if (IS_ERR(exp)) {
 		err = PTR_ERR(exp);
 		goto out;
@@ -1207,7 +1200,7 @@ static struct svc_export *exp_find(struct auth_domain *clp, int fsid_type,
 	if (IS_ERR(ek))
 		return ERR_CAST(ek);
 
-	exp = exp_get_by_name(clp, ek->ek_path.mnt, ek->ek_path.dentry, reqp);
+	exp = exp_get_by_name(clp, &ek->ek_path, reqp);
 	cache_put(&ek->h, &svc_expkey_cache);
 
 	if (IS_ERR(exp))
@@ -1247,8 +1240,7 @@ __be32 check_nfsd_access(struct svc_export *exp, struct svc_rqst *rqstp)
  * use exp_get_by_name() or exp_find().
  */
 struct svc_export *
-rqst_exp_get_by_name(struct svc_rqst *rqstp, struct vfsmount *mnt,
-		struct dentry *dentry)
+rqst_exp_get_by_name(struct svc_rqst *rqstp, struct path *path)
 {
 	struct svc_export *gssexp, *exp = ERR_PTR(-ENOENT);
 
@@ -1256,8 +1248,7 @@ rqst_exp_get_by_name(struct svc_rqst *rqstp, struct vfsmount *mnt,
 		goto gss;
 
 	/* First try the auth_unix client: */
-	exp = exp_get_by_name(rqstp->rq_client, mnt, dentry,
-						&rqstp->rq_chandle);
+	exp = exp_get_by_name(rqstp->rq_client, path, &rqstp->rq_chandle);
 	if (PTR_ERR(exp) == -ENOENT)
 		goto gss;
 	if (IS_ERR(exp))
@@ -1269,8 +1260,7 @@ gss:
 	/* Otherwise, try falling back on gss client */
 	if (rqstp->rq_gssclient == NULL)
 		return exp;
-	gssexp = exp_get_by_name(rqstp->rq_gssclient, mnt, dentry,
-						&rqstp->rq_chandle);
+	gssexp = exp_get_by_name(rqstp->rq_gssclient, path, &rqstp->rq_chandle);
 	if (PTR_ERR(gssexp) == -ENOENT)
 		return exp;
 	if (!IS_ERR(exp))
@@ -1309,23 +1299,19 @@ gss:
 }
 
 struct svc_export *
-rqst_exp_parent(struct svc_rqst *rqstp, struct vfsmount *mnt,
-		struct dentry *dentry)
+rqst_exp_parent(struct svc_rqst *rqstp, struct path *path)
 {
-	struct svc_export *exp;
-
-	dget(dentry);
-	exp = rqst_exp_get_by_name(rqstp, mnt, dentry);
-
-	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(dentry)) {
-		struct dentry *parent;
-
-		parent = dget_parent(dentry);
-		dput(dentry);
-		dentry = parent;
-		exp = rqst_exp_get_by_name(rqstp, mnt, dentry);
+	struct dentry *saved = dget(path->dentry);
+	struct svc_export *exp = rqst_exp_get_by_name(rqstp, path);
+
+	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(path->dentry)) {
+		struct dentry *parent = dget_parent(path->dentry);
+		dput(path->dentry);
+		path->dentry = parent;
+		exp = rqst_exp_get_by_name(rqstp, path);
 	}
-	dput(dentry);
+	dput(path->dentry);
+	path->dentry = saved;
 	return exp;
 }
 
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index bd584bcf1d9..99f83575359 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -101,36 +101,35 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp,
 {
 	struct svc_export *exp = *expp, *exp2 = NULL;
 	struct dentry *dentry = *dpp;
-	struct vfsmount *mnt = mntget(exp->ex_path.mnt);
-	struct dentry *mounts = dget(dentry);
+	struct path path = {.mnt = mntget(exp->ex_path.mnt),
+			    .dentry = dget(dentry)};
 	int err = 0;
 
-	while (follow_down(&mnt,&mounts)&&d_mountpoint(mounts));
+	while (d_mountpoint(path.dentry) && follow_down(&path))
+		;
 
-	exp2 = rqst_exp_get_by_name(rqstp, mnt, mounts);
+	exp2 = rqst_exp_get_by_name(rqstp, &path);
 	if (IS_ERR(exp2)) {
 		if (PTR_ERR(exp2) != -ENOENT)
 			err = PTR_ERR(exp2);
-		dput(mounts);
-		mntput(mnt);
+		path_put(&path);
 		goto out;
 	}
 	if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
 		/* successfully crossed mount point */
 		/*
-		 * This is subtle: dentry is *not* under mnt at this point.
-		 * The only reason we are safe is that original mnt is pinned
-		 * down by exp, so we should dput before putting exp.
+		 * This is subtle: path.dentry is *not* on path.mnt
+		 * at this point.  The only reason we are safe is that
+		 * original mnt is pinned down by exp, so we should
+		 * put path *before* putting exp
 		 */
-		dput(dentry);
-		*dpp = mounts;
-		exp_put(exp);
+		*dpp = path.dentry;
+		path.dentry = dentry;
 		*expp = exp2;
-	} else {
-		exp_put(exp2);
-		dput(mounts);
+		exp2 = exp;
 	}
-	mntput(mnt);
+	path_put(&path);
+	exp_put(exp2);
 out:
 	return err;
 }
@@ -169,28 +168,29 @@ nfsd_lookup_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp,
 			/* checking mountpoint crossing is very different when stepping up */
 			struct svc_export *exp2 = NULL;
 			struct dentry *dp;
-			struct vfsmount *mnt = mntget(exp->ex_path.mnt);
-			dentry = dget(dparent);
-			while(dentry == mnt->mnt_root && follow_up(&mnt, &dentry))
+			struct path path = {.mnt = mntget(exp->ex_path.mnt),
+					    .dentry = dget(dparent)};
+
+			while (path.dentry == path.mnt->mnt_root &&
+			       follow_up(&path))
 				;
-			dp = dget_parent(dentry);
-			dput(dentry);
-			dentry = dp;
+			dp = dget_parent(path.dentry);
+			dput(path.dentry);
+			path.dentry = dp;
 
-			exp2 = rqst_exp_parent(rqstp, mnt, dentry);
+			exp2 = rqst_exp_parent(rqstp, &path);
 			if (PTR_ERR(exp2) == -ENOENT) {
-				dput(dentry);
 				dentry = dget(dparent);
 			} else if (IS_ERR(exp2)) {
 				host_err = PTR_ERR(exp2);
-				dput(dentry);
-				mntput(mnt);
+				path_put(&path);
 				goto out_nfserr;
 			} else {
+				dentry = dget(path.dentry);
 				exp_put(exp);
 				exp = exp2;
 			}
-			mntput(mnt);
+			path_put(&path);
 		}
 	} else {
 		fh_lock(fhp);
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 064279e33bb..36df60b6d8a 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -31,21 +31,26 @@
 #include "dat.h"
 #include "alloc.h"
 
+struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *bmap)
+{
+	return nilfs_dat_inode(NILFS_I_NILFS(bmap->b_inode));
+}
+
 int nilfs_bmap_lookup_at_level(struct nilfs_bmap *bmap, __u64 key, int level,
 			       __u64 *ptrp)
 {
-	__u64 ptr;
+	sector_t blocknr;
 	int ret;
 
 	down_read(&bmap->b_sem);
 	ret = bmap->b_ops->bop_lookup(bmap, key, level, ptrp);
 	if (ret < 0)
 		goto out;
-	if (bmap->b_pops->bpop_translate != NULL) {
-		ret = bmap->b_pops->bpop_translate(bmap, *ptrp, &ptr);
-		if (ret < 0)
-			goto out;
-		*ptrp = ptr;
+	if (NILFS_BMAP_USE_VBN(bmap)) {
+		ret = nilfs_dat_translate(nilfs_bmap_get_dat(bmap), *ptrp,
+					  &blocknr);
+		if (!ret)
+			*ptrp = blocknr;
 	}
 
  out:
@@ -53,6 +58,16 @@ int nilfs_bmap_lookup_at_level(struct nilfs_bmap *bmap, __u64 key, int level,
 	return ret;
 }
 
+int nilfs_bmap_lookup_contig(struct nilfs_bmap *bmap, __u64 key, __u64 *ptrp,
+			     unsigned maxblocks)
+{
+	int ret;
+
+	down_read(&bmap->b_sem);
+	ret = bmap->b_ops->bop_lookup_contig(bmap, key, ptrp, maxblocks);
+	up_read(&bmap->b_sem);
+	return ret;
+}
 
 /**
  * nilfs_bmap_lookup - find a record
@@ -101,8 +116,7 @@ static int nilfs_bmap_do_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 			if (n < 0)
 				return n;
 			ret = nilfs_btree_convert_and_insert(
-				bmap, key, ptr, keys, ptrs, n,
-				NILFS_BMAP_LARGE_LOW, NILFS_BMAP_LARGE_HIGH);
+				bmap, key, ptr, keys, ptrs, n);
 			if (ret == 0)
 				bmap->b_u.u_flags |= NILFS_BMAP_LARGE;
 
@@ -158,8 +172,7 @@ static int nilfs_bmap_do_delete(struct nilfs_bmap *bmap, __u64 key)
 			if (n < 0)
 				return n;
 			ret = nilfs_direct_delete_and_convert(
-				bmap, key, keys, ptrs, n,
-				NILFS_BMAP_SMALL_LOW, NILFS_BMAP_SMALL_HIGH);
+				bmap, key, keys, ptrs, n);
 			if (ret == 0)
 				bmap->b_u.u_flags &= ~NILFS_BMAP_LARGE;
 
@@ -417,38 +430,6 @@ void nilfs_bmap_sub_blocks(const struct nilfs_bmap *bmap, int n)
 		mark_inode_dirty(bmap->b_inode);
 }
 
-int nilfs_bmap_get_block(const struct nilfs_bmap *bmap, __u64 ptr,
-			 struct buffer_head **bhp)
-{
-	return nilfs_btnode_get(&NILFS_BMAP_I(bmap)->i_btnode_cache,
-				ptr, 0, bhp, 0);
-}
-
-void nilfs_bmap_put_block(const struct nilfs_bmap *bmap,
-			  struct buffer_head *bh)
-{
-	brelse(bh);
-}
-
-int nilfs_bmap_get_new_block(const struct nilfs_bmap *bmap, __u64 ptr,
-			     struct buffer_head **bhp)
-{
-	int ret;
-
-	ret = nilfs_btnode_get(&NILFS_BMAP_I(bmap)->i_btnode_cache,
-			       ptr, 0, bhp, 1);
-	if (ret < 0)
-		return ret;
-	set_buffer_nilfs_volatile(*bhp);
-	return 0;
-}
-
-void nilfs_bmap_delete_block(const struct nilfs_bmap *bmap,
-			     struct buffer_head *bh)
-{
-	nilfs_btnode_delete(bh);
-}
-
 __u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *bmap,
 			      const struct buffer_head *bh)
 {
@@ -476,11 +457,6 @@ __u64 nilfs_bmap_find_target_seq(const struct nilfs_bmap *bmap, __u64 key)
 		return NILFS_BMAP_INVALID_PTR;
 }
 
-static struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *bmap)
-{
-	return nilfs_dat_inode(NILFS_I_NILFS(bmap->b_inode));
-}
-
 #define NILFS_BMAP_GROUP_DIV	8
 __u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *bmap)
 {
@@ -493,64 +469,51 @@ __u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *bmap)
 		(entries_per_group / NILFS_BMAP_GROUP_DIV);
 }
 
-static int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
+int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *bmap,
+				 union nilfs_bmap_ptr_req *req)
 {
 	return nilfs_dat_prepare_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *bmap,
+				 union nilfs_bmap_ptr_req *req)
 {
 	nilfs_dat_commit_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *bmap,
-				     union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *bmap,
+			      union nilfs_bmap_ptr_req *req)
 {
 	nilfs_dat_abort_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static int nilfs_bmap_prepare_start_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
+int nilfs_bmap_start_v(struct nilfs_bmap *bmap, union nilfs_bmap_ptr_req *req,
+		       sector_t blocknr)
 {
-	return nilfs_dat_prepare_start(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-static void nilfs_bmap_commit_start_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req,
-				      sector_t blocknr)
-{
-	nilfs_dat_commit_start(nilfs_bmap_get_dat(bmap), &req->bpr_req,
-			       blocknr);
-}
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
+	int ret;
 
-static void nilfs_bmap_abort_start_v(struct nilfs_bmap *bmap,
-				     union nilfs_bmap_ptr_req *req)
-{
-	nilfs_dat_abort_start(nilfs_bmap_get_dat(bmap), &req->bpr_req);
+	ret = nilfs_dat_prepare_start(dat, &req->bpr_req);
+	if (likely(!ret))
+		nilfs_dat_commit_start(dat, &req->bpr_req, blocknr);
+	return ret;
 }
 
-static int nilfs_bmap_prepare_end_v(struct nilfs_bmap *bmap,
-				    union nilfs_bmap_ptr_req *req)
+int nilfs_bmap_prepare_end_v(struct nilfs_bmap *bmap,
+			     union nilfs_bmap_ptr_req *req)
 {
 	return nilfs_dat_prepare_end(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static void nilfs_bmap_commit_end_v(struct nilfs_bmap *bmap,
-				    union nilfs_bmap_ptr_req *req)
-{
-	nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req, 0);
-}
-
-static void nilfs_bmap_commit_end_vmdt(struct nilfs_bmap *bmap,
-				       union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_commit_end_v(struct nilfs_bmap *bmap,
+			     union nilfs_bmap_ptr_req *req)
 {
-	nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req, 1);
+	nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req,
+			     bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
 }
 
-static void nilfs_bmap_abort_end_v(struct nilfs_bmap *bmap,
-				   union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_abort_end_v(struct nilfs_bmap *bmap,
+			    union nilfs_bmap_ptr_req *req)
 {
 	nilfs_dat_abort_end(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
@@ -566,128 +529,44 @@ int nilfs_bmap_mark_dirty(const struct nilfs_bmap *bmap, __u64 vblocknr)
 	return nilfs_dat_mark_dirty(nilfs_bmap_get_dat(bmap), vblocknr);
 }
 
-int nilfs_bmap_prepare_update(struct nilfs_bmap *bmap,
-			      union nilfs_bmap_ptr_req *oldreq,
-			      union nilfs_bmap_ptr_req *newreq)
+int nilfs_bmap_prepare_update_v(struct nilfs_bmap *bmap,
+				union nilfs_bmap_ptr_req *oldreq,
+				union nilfs_bmap_ptr_req *newreq)
 {
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
 	int ret;
 
-	ret = bmap->b_pops->bpop_prepare_end_ptr(bmap, oldreq);
+	ret = nilfs_dat_prepare_end(dat, &oldreq->bpr_req);
 	if (ret < 0)
 		return ret;
-	ret = bmap->b_pops->bpop_prepare_alloc_ptr(bmap, newreq);
+	ret = nilfs_dat_prepare_alloc(dat, &newreq->bpr_req);
 	if (ret < 0)
-		bmap->b_pops->bpop_abort_end_ptr(bmap, oldreq);
+		nilfs_dat_abort_end(dat, &oldreq->bpr_req);
 
 	return ret;
 }
 
-void nilfs_bmap_commit_update(struct nilfs_bmap *bmap,
-			      union nilfs_bmap_ptr_req *oldreq,
-			      union nilfs_bmap_ptr_req *newreq)
+void nilfs_bmap_commit_update_v(struct nilfs_bmap *bmap,
+				union nilfs_bmap_ptr_req *oldreq,
+				union nilfs_bmap_ptr_req *newreq)
 {
-	bmap->b_pops->bpop_commit_end_ptr(bmap, oldreq);
-	bmap->b_pops->bpop_commit_alloc_ptr(bmap, newreq);
-}
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
 
-void nilfs_bmap_abort_update(struct nilfs_bmap *bmap,
-			     union nilfs_bmap_ptr_req *oldreq,
-			     union nilfs_bmap_ptr_req *newreq)
-{
-	bmap->b_pops->bpop_abort_end_ptr(bmap, oldreq);
-	bmap->b_pops->bpop_abort_alloc_ptr(bmap, newreq);
+	nilfs_dat_commit_end(dat, &oldreq->bpr_req,
+			     bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
+	nilfs_dat_commit_alloc(dat, &newreq->bpr_req);
 }
 
-static int nilfs_bmap_translate_v(const struct nilfs_bmap *bmap, __u64 ptr,
-				  __u64 *ptrp)
+void nilfs_bmap_abort_update_v(struct nilfs_bmap *bmap,
+			       union nilfs_bmap_ptr_req *oldreq,
+			       union nilfs_bmap_ptr_req *newreq)
 {
-	sector_t blocknr;
-	int ret;
-
-	ret = nilfs_dat_translate(nilfs_bmap_get_dat(bmap), ptr, &blocknr);
-	if (ret < 0)
-		return ret;
-	if (ptrp != NULL)
-		*ptrp = blocknr;
-	return 0;
-}
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
 
-static int nilfs_bmap_prepare_alloc_p(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
-{
-	/* ignore target ptr */
-	req->bpr_ptr = bmap->b_last_allocated_ptr++;
-	return 0;
+	nilfs_dat_abort_end(dat, &oldreq->bpr_req);
+	nilfs_dat_abort_alloc(dat, &newreq->bpr_req);
 }
 
-static void nilfs_bmap_commit_alloc_p(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
-{
-	/* do nothing */
-}
-
-static void nilfs_bmap_abort_alloc_p(struct nilfs_bmap *bmap,
-				     union nilfs_bmap_ptr_req *req)
-{
-	bmap->b_last_allocated_ptr--;
-}
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_v = {
-	.bpop_prepare_alloc_ptr	=	nilfs_bmap_prepare_alloc_v,
-	.bpop_commit_alloc_ptr	=	nilfs_bmap_commit_alloc_v,
-	.bpop_abort_alloc_ptr	=	nilfs_bmap_abort_alloc_v,
-	.bpop_prepare_start_ptr	=	nilfs_bmap_prepare_start_v,
-	.bpop_commit_start_ptr	=	nilfs_bmap_commit_start_v,
-	.bpop_abort_start_ptr	=	nilfs_bmap_abort_start_v,
-	.bpop_prepare_end_ptr	=	nilfs_bmap_prepare_end_v,
-	.bpop_commit_end_ptr	=	nilfs_bmap_commit_end_v,
-	.bpop_abort_end_ptr	=	nilfs_bmap_abort_end_v,
-
-	.bpop_translate		=	nilfs_bmap_translate_v,
-};
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_vmdt = {
-	.bpop_prepare_alloc_ptr	=	nilfs_bmap_prepare_alloc_v,
-	.bpop_commit_alloc_ptr	=	nilfs_bmap_commit_alloc_v,
-	.bpop_abort_alloc_ptr	=	nilfs_bmap_abort_alloc_v,
-	.bpop_prepare_start_ptr	=	nilfs_bmap_prepare_start_v,
-	.bpop_commit_start_ptr	=	nilfs_bmap_commit_start_v,
-	.bpop_abort_start_ptr	=	nilfs_bmap_abort_start_v,
-	.bpop_prepare_end_ptr	=	nilfs_bmap_prepare_end_v,
-	.bpop_commit_end_ptr	=	nilfs_bmap_commit_end_vmdt,
-	.bpop_abort_end_ptr	=	nilfs_bmap_abort_end_v,
-
-	.bpop_translate		=	nilfs_bmap_translate_v,
-};
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_p = {
-	.bpop_prepare_alloc_ptr	=	nilfs_bmap_prepare_alloc_p,
-	.bpop_commit_alloc_ptr	=	nilfs_bmap_commit_alloc_p,
-	.bpop_abort_alloc_ptr	=	nilfs_bmap_abort_alloc_p,
-	.bpop_prepare_start_ptr	=	NULL,
-	.bpop_commit_start_ptr	=	NULL,
-	.bpop_abort_start_ptr	=	NULL,
-	.bpop_prepare_end_ptr	=	NULL,
-	.bpop_commit_end_ptr	=	NULL,
-	.bpop_abort_end_ptr	=	NULL,
-
-	.bpop_translate		=	NULL,
-};
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_gc = {
-	.bpop_prepare_alloc_ptr	=	NULL,
-	.bpop_commit_alloc_ptr	=	NULL,
-	.bpop_abort_alloc_ptr	=	NULL,
-	.bpop_prepare_start_ptr	=	NULL,
-	.bpop_commit_start_ptr	=	NULL,
-	.bpop_abort_start_ptr	=	NULL,
-	.bpop_prepare_end_ptr	=	NULL,
-	.bpop_commit_end_ptr	=	NULL,
-	.bpop_abort_end_ptr	=	NULL,
-
-	.bpop_translate		=	NULL,
-};
-
 static struct lock_class_key nilfs_bmap_dat_lock_key;
 
 /**
@@ -714,31 +593,26 @@ int nilfs_bmap_read(struct nilfs_bmap *bmap, struct nilfs_inode *raw_inode)
 	bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
 	switch (bmap->b_inode->i_ino) {
 	case NILFS_DAT_INO:
-		bmap->b_pops = &nilfs_bmap_ptr_ops_p;
-		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
+		bmap->b_ptr_type = NILFS_BMAP_PTR_P;
+		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT;
 		lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 		break;
 	case NILFS_CPFILE_INO:
 	case NILFS_SUFILE_INO:
-		bmap->b_pops = &nilfs_bmap_ptr_ops_vmdt;
-		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
+		bmap->b_ptr_type = NILFS_BMAP_PTR_VS;
+		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
 		break;
 	default:
-		bmap->b_pops = &nilfs_bmap_ptr_ops_v;
-		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
+		bmap->b_ptr_type = NILFS_BMAP_PTR_VM;
+		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
 		break;
 	}
 
 	return (bmap->b_u.u_flags & NILFS_BMAP_LARGE) ?
-		nilfs_btree_init(bmap,
-				 NILFS_BMAP_LARGE_LOW,
-				 NILFS_BMAP_LARGE_HIGH) :
-		nilfs_direct_init(bmap,
-				  NILFS_BMAP_SMALL_LOW,
-				  NILFS_BMAP_SMALL_HIGH);
+		nilfs_btree_init(bmap) : nilfs_direct_init(bmap);
 }
 
 /**
@@ -764,7 +638,7 @@ void nilfs_bmap_init_gc(struct nilfs_bmap *bmap)
 	memset(&bmap->b_u, 0, NILFS_BMAP_SIZE);
 	init_rwsem(&bmap->b_sem);
 	bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
-	bmap->b_pops = &nilfs_bmap_ptr_ops_gc;
+	bmap->b_ptr_type = NILFS_BMAP_PTR_U;
 	bmap->b_last_allocated_key = 0;
 	bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
 	bmap->b_state = 0;
diff --git a/fs/nilfs2/bmap.h b/fs/nilfs2/bmap.h
index 4f2708abb1b..b2890cdcef1 100644
--- a/fs/nilfs2/bmap.h
+++ b/fs/nilfs2/bmap.h
@@ -64,6 +64,8 @@ struct nilfs_bmap_stats {
  */
 struct nilfs_bmap_operations {
 	int (*bop_lookup)(const struct nilfs_bmap *, __u64, int, __u64 *);
+	int (*bop_lookup_contig)(const struct nilfs_bmap *, __u64, __u64 *,
+				 unsigned);
 	int (*bop_insert)(struct nilfs_bmap *, __u64, __u64);
 	int (*bop_delete)(struct nilfs_bmap *, __u64);
 	void (*bop_clear)(struct nilfs_bmap *);
@@ -86,34 +88,6 @@ struct nilfs_bmap_operations {
 };
 
 
-/**
- * struct nilfs_bmap_ptr_operations - bmap ptr operation table
- */
-struct nilfs_bmap_ptr_operations {
-	int (*bpop_prepare_alloc_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *);
-	void (*bpop_commit_alloc_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *);
-	void (*bpop_abort_alloc_ptr)(struct nilfs_bmap *,
-				     union nilfs_bmap_ptr_req *);
-	int (*bpop_prepare_start_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *);
-	void (*bpop_commit_start_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *,
-				      sector_t);
-	void (*bpop_abort_start_ptr)(struct nilfs_bmap *,
-				     union nilfs_bmap_ptr_req *);
-	int (*bpop_prepare_end_ptr)(struct nilfs_bmap *,
-				    union nilfs_bmap_ptr_req *);
-	void (*bpop_commit_end_ptr)(struct nilfs_bmap *,
-				    union nilfs_bmap_ptr_req *);
-	void (*bpop_abort_end_ptr)(struct nilfs_bmap *,
-				   union nilfs_bmap_ptr_req *);
-
-	int (*bpop_translate)(const struct nilfs_bmap *, __u64, __u64 *);
-};
-
-
 #define NILFS_BMAP_SIZE		(NILFS_INODE_BMAP_SIZE * sizeof(__le64))
 #define NILFS_BMAP_KEY_BIT	(sizeof(unsigned long) * 8 /* CHAR_BIT */)
 #define NILFS_BMAP_NEW_PTR_INIT	\
@@ -131,11 +105,9 @@ static inline int nilfs_bmap_is_new_ptr(unsigned long ptr)
  * @b_sem: semaphore
  * @b_inode: owner of bmap
  * @b_ops: bmap operation table
- * @b_pops: bmap ptr operation table
- * @b_low: low watermark of conversion
- * @b_high: high watermark of conversion
  * @b_last_allocated_key: last allocated key for data block
  * @b_last_allocated_ptr: last allocated ptr for data block
+ * @b_ptr_type: pointer type
  * @b_state: state
  */
 struct nilfs_bmap {
@@ -146,14 +118,22 @@ struct nilfs_bmap {
 	struct rw_semaphore b_sem;
 	struct inode *b_inode;
 	const struct nilfs_bmap_operations *b_ops;
-	const struct nilfs_bmap_ptr_operations *b_pops;
-	__u64 b_low;
-	__u64 b_high;
 	__u64 b_last_allocated_key;
 	__u64 b_last_allocated_ptr;
+	int b_ptr_type;
 	int b_state;
 };
 
+/* pointer type */
+#define NILFS_BMAP_PTR_P	0	/* physical block number (i.e. LBN) */
+#define NILFS_BMAP_PTR_VS	1	/* virtual block number (single
+					   version) */
+#define NILFS_BMAP_PTR_VM	2	/* virtual block number (has multiple
+					   versions) */
+#define NILFS_BMAP_PTR_U	(-1)	/* never perform pointer operations */
+
+#define NILFS_BMAP_USE_VBN(bmap)	((bmap)->b_ptr_type > 0)
+
 /* state */
 #define NILFS_BMAP_DIRTY	0x00000001
 
@@ -162,6 +142,7 @@ int nilfs_bmap_test_and_clear_dirty(struct nilfs_bmap *);
 int nilfs_bmap_read(struct nilfs_bmap *, struct nilfs_inode *);
 void nilfs_bmap_write(struct nilfs_bmap *, struct nilfs_inode *);
 int nilfs_bmap_lookup(struct nilfs_bmap *, unsigned long, unsigned long *);
+int nilfs_bmap_lookup_contig(struct nilfs_bmap *, __u64, __u64 *, unsigned);
 int nilfs_bmap_insert(struct nilfs_bmap *, unsigned long, unsigned long);
 int nilfs_bmap_delete(struct nilfs_bmap *, unsigned long);
 int nilfs_bmap_last_key(struct nilfs_bmap *, unsigned long *);
@@ -182,7 +163,67 @@ void nilfs_bmap_commit_gcdat(struct nilfs_bmap *, struct nilfs_bmap *);
 /*
  * Internal use only
  */
+struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *);
+int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *,
+			       union nilfs_bmap_ptr_req *);
+void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *,
+			       union nilfs_bmap_ptr_req *);
+void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *,
+			      union nilfs_bmap_ptr_req *);
 
+static inline int nilfs_bmap_prepare_alloc_ptr(struct nilfs_bmap *bmap,
+					       union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		return nilfs_bmap_prepare_alloc_v(bmap, req);
+	/* ignore target ptr */
+	req->bpr_ptr = bmap->b_last_allocated_ptr++;
+	return 0;
+}
+
+static inline void nilfs_bmap_commit_alloc_ptr(struct nilfs_bmap *bmap,
+					       union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_commit_alloc_v(bmap, req);
+}
+
+static inline void nilfs_bmap_abort_alloc_ptr(struct nilfs_bmap *bmap,
+					      union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_abort_alloc_v(bmap, req);
+	else
+		bmap->b_last_allocated_ptr--;
+}
+
+int nilfs_bmap_prepare_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
+void nilfs_bmap_commit_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
+void nilfs_bmap_abort_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
+
+static inline int nilfs_bmap_prepare_end_ptr(struct nilfs_bmap *bmap,
+					     union nilfs_bmap_ptr_req *req)
+{
+	return NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_bmap_prepare_end_v(bmap, req) : 0;
+}
+
+static inline void nilfs_bmap_commit_end_ptr(struct nilfs_bmap *bmap,
+					     union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_commit_end_v(bmap, req);
+}
+
+static inline void nilfs_bmap_abort_end_ptr(struct nilfs_bmap *bmap,
+					    union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_abort_end_v(bmap, req);
+}
+
+int nilfs_bmap_start_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *,
+		       sector_t);
 int nilfs_bmap_move_v(const struct nilfs_bmap *, __u64, sector_t);
 int nilfs_bmap_mark_dirty(const struct nilfs_bmap *, __u64);
 
@@ -193,28 +234,20 @@ __u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *,
 __u64 nilfs_bmap_find_target_seq(const struct nilfs_bmap *, __u64);
 __u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *);
 
-int nilfs_bmap_prepare_update(struct nilfs_bmap *,
-			      union nilfs_bmap_ptr_req *,
-			      union nilfs_bmap_ptr_req *);
-void nilfs_bmap_commit_update(struct nilfs_bmap *,
-			      union nilfs_bmap_ptr_req *,
-			      union nilfs_bmap_ptr_req *);
-void nilfs_bmap_abort_update(struct nilfs_bmap *,
-			     union nilfs_bmap_ptr_req *,
-			     union nilfs_bmap_ptr_req *);
+int nilfs_bmap_prepare_update_v(struct nilfs_bmap *,
+				union nilfs_bmap_ptr_req *,
+				union nilfs_bmap_ptr_req *);
+void nilfs_bmap_commit_update_v(struct nilfs_bmap *,
+				union nilfs_bmap_ptr_req *,
+				union nilfs_bmap_ptr_req *);
+void nilfs_bmap_abort_update_v(struct nilfs_bmap *,
+			       union nilfs_bmap_ptr_req *,
+			       union nilfs_bmap_ptr_req *);
 
 void nilfs_bmap_add_blocks(const struct nilfs_bmap *, int);
 void nilfs_bmap_sub_blocks(const struct nilfs_bmap *, int);
 
 
-int nilfs_bmap_get_block(const struct nilfs_bmap *, __u64,
-			 struct buffer_head **);
-void nilfs_bmap_put_block(const struct nilfs_bmap *, struct buffer_head *);
-int nilfs_bmap_get_new_block(const struct nilfs_bmap *, __u64,
-			     struct buffer_head **);
-void nilfs_bmap_delete_block(const struct nilfs_bmap *, struct buffer_head *);
-
-
 /* Assume that bmap semaphore is locked. */
 static inline int nilfs_bmap_dirty(const struct nilfs_bmap *bmap)
 {
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 4cc07b2c30e..7e0b61be212 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -46,15 +46,18 @@ void nilfs_btnode_cache_init_once(struct address_space *btnc)
 	INIT_LIST_HEAD(&btnc->i_mmap_nonlinear);
 }
 
-static struct address_space_operations def_btnode_aops;
+static struct address_space_operations def_btnode_aops = {
+	.sync_page		= block_sync_page,
+};
 
-void nilfs_btnode_cache_init(struct address_space *btnc)
+void nilfs_btnode_cache_init(struct address_space *btnc,
+			     struct backing_dev_info *bdi)
 {
 	btnc->host = NULL;  /* can safely set to host inode ? */
 	btnc->flags = 0;
 	mapping_set_gfp_mask(btnc, GFP_NOFS);
 	btnc->assoc_mapping = NULL;
-	btnc->backing_dev_info = &default_backing_dev_info;
+	btnc->backing_dev_info = bdi;
 	btnc->a_ops = &def_btnode_aops;
 }
 
diff --git a/fs/nilfs2/btnode.h b/fs/nilfs2/btnode.h
index 35faa86444a..3e2275172ed 100644
--- a/fs/nilfs2/btnode.h
+++ b/fs/nilfs2/btnode.h
@@ -38,7 +38,7 @@ struct nilfs_btnode_chkey_ctxt {
 };
 
 void nilfs_btnode_cache_init_once(struct address_space *);
-void nilfs_btnode_cache_init(struct address_space *);
+void nilfs_btnode_cache_init(struct address_space *, struct backing_dev_info *);
 void nilfs_btnode_cache_clear(struct address_space *);
 int nilfs_btnode_submit_block(struct address_space *, __u64, sector_t,
 			      struct buffer_head **, int);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index 6b37a276729..aa412724b64 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -29,6 +29,7 @@
 #include "btnode.h"
 #include "btree.h"
 #include "alloc.h"
+#include "dat.h"
 
 /**
  * struct nilfs_btree_path - A path on which B-tree operations are executed
@@ -109,8 +110,7 @@ static void nilfs_btree_clear_path(const struct nilfs_btree *btree,
 	     level < NILFS_BTREE_LEVEL_MAX;
 	     level++) {
 		if (path[level].bp_bh != NULL) {
-			nilfs_bmap_put_block(&btree->bt_bmap,
-					     path[level].bp_bh);
+			brelse(path[level].bp_bh);
 			path[level].bp_bh = NULL;
 		}
 		/* sib_bh is released or deleted by prepare or commit
@@ -123,10 +123,29 @@ static void nilfs_btree_clear_path(const struct nilfs_btree *btree,
 	}
 }
 
-
 /*
  * B-tree node operations
  */
+static int nilfs_btree_get_block(const struct nilfs_btree *btree, __u64 ptr,
+				 struct buffer_head **bhp)
+{
+	struct address_space *btnc =
+		&NILFS_BMAP_I((struct nilfs_bmap *)btree)->i_btnode_cache;
+	return nilfs_btnode_get(btnc, ptr, 0, bhp, 0);
+}
+
+static int nilfs_btree_get_new_block(const struct nilfs_btree *btree,
+				     __u64 ptr, struct buffer_head **bhp)
+{
+	struct address_space *btnc =
+		&NILFS_BMAP_I((struct nilfs_bmap *)btree)->i_btnode_cache;
+	int ret;
+
+	ret = nilfs_btnode_get(btnc, ptr, 0, bhp, 1);
+	if (!ret)
+		set_buffer_nilfs_volatile(*bhp);
+	return ret;
+}
 
 static inline int
 nilfs_btree_node_get_flags(const struct nilfs_btree *btree,
@@ -488,8 +507,7 @@ static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
 	path[level].bp_index = index;
 
 	for (level--; level >= minlevel; level--) {
-		ret = nilfs_bmap_get_block(&btree->bt_bmap, ptr,
-					   &path[level].bp_bh);
+		ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
 		if (ret < 0)
 			return ret;
 		node = nilfs_btree_get_nonroot_node(btree, path, level);
@@ -535,8 +553,7 @@ static int nilfs_btree_do_lookup_last(const struct nilfs_btree *btree,
 	path[level].bp_index = index;
 
 	for (level--; level > 0; level--) {
-		ret = nilfs_bmap_get_block(&btree->bt_bmap, ptr,
-					   &path[level].bp_bh);
+		ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
 		if (ret < 0)
 			return ret;
 		node = nilfs_btree_get_nonroot_node(btree, path, level);
@@ -579,6 +596,87 @@ static int nilfs_btree_lookup(const struct nilfs_bmap *bmap,
 	return ret;
 }
 
+static int nilfs_btree_lookup_contig(const struct nilfs_bmap *bmap,
+				     __u64 key, __u64 *ptrp, unsigned maxblocks)
+{
+	struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
+	struct nilfs_btree_path *path;
+	struct nilfs_btree_node *node;
+	struct inode *dat = NULL;
+	__u64 ptr, ptr2;
+	sector_t blocknr;
+	int level = NILFS_BTREE_LEVEL_NODE_MIN;
+	int ret, cnt, index, maxlevel;
+
+	path = nilfs_btree_alloc_path(btree);
+	if (path == NULL)
+		return -ENOMEM;
+	nilfs_btree_init_path(btree, path);
+	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level);
+	if (ret < 0)
+		goto out;
+
+	if (NILFS_BMAP_USE_VBN(bmap)) {
+		dat = nilfs_bmap_get_dat(bmap);
+		ret = nilfs_dat_translate(dat, ptr, &blocknr);
+		if (ret < 0)
+			goto out;
+		ptr = blocknr;
+	}
+	cnt = 1;
+	if (cnt == maxblocks)
+		goto end;
+
+	maxlevel = nilfs_btree_height(btree) - 1;
+	node = nilfs_btree_get_node(btree, path, level);
+	index = path[level].bp_index + 1;
+	for (;;) {
+		while (index < nilfs_btree_node_get_nchildren(btree, node)) {
+			if (nilfs_btree_node_get_key(btree, node, index) !=
+			    key + cnt)
+				goto end;
+			ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
+			if (dat) {
+				ret = nilfs_dat_translate(dat, ptr2, &blocknr);
+				if (ret < 0)
+					goto out;
+				ptr2 = blocknr;
+			}
+			if (ptr2 != ptr + cnt || ++cnt == maxblocks)
+				goto end;
+			index++;
+			continue;
+		}
+		if (level == maxlevel)
+			break;
+
+		/* look-up right sibling node */
+		node = nilfs_btree_get_node(btree, path, level + 1);
+		index = path[level + 1].bp_index + 1;
+		if (index >= nilfs_btree_node_get_nchildren(btree, node) ||
+		    nilfs_btree_node_get_key(btree, node, index) != key + cnt)
+			break;
+		ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
+		path[level + 1].bp_index = index;
+
+		brelse(path[level].bp_bh);
+		path[level].bp_bh = NULL;
+		ret = nilfs_btree_get_block(btree, ptr2, &path[level].bp_bh);
+		if (ret < 0)
+			goto out;
+		node = nilfs_btree_get_nonroot_node(btree, path, level);
+		index = 0;
+		path[level].bp_index = index;
+	}
+ end:
+	*ptrp = ptr;
+	ret = cnt;
+ out:
+	nilfs_btree_clear_path(btree, path);
+	nilfs_btree_free_path(btree, path);
+	return ret;
+}
+
 static void nilfs_btree_promote_key(struct nilfs_btree *btree,
 				    struct nilfs_btree_path *path,
 				    int level, __u64 key)
@@ -669,13 +767,13 @@ static void nilfs_btree_carry_left(struct nilfs_btree *btree,
 				nilfs_btree_node_get_key(btree, node, 0));
 
 	if (move) {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_bh);
+		brelse(path[level].bp_bh);
 		path[level].bp_bh = path[level].bp_sib_bh;
 		path[level].bp_sib_bh = NULL;
 		path[level].bp_index += lnchildren;
 		path[level + 1].bp_index--;
 	} else {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+		brelse(path[level].bp_sib_bh);
 		path[level].bp_sib_bh = NULL;
 		path[level].bp_index -= n;
 	}
@@ -722,14 +820,14 @@ static void nilfs_btree_carry_right(struct nilfs_btree *btree,
 	path[level + 1].bp_index--;
 
 	if (move) {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_bh);
+		brelse(path[level].bp_bh);
 		path[level].bp_bh = path[level].bp_sib_bh;
 		path[level].bp_sib_bh = NULL;
 		path[level].bp_index -=
 			nilfs_btree_node_get_nchildren(btree, node);
 		path[level + 1].bp_index++;
 	} else {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+		brelse(path[level].bp_sib_bh);
 		path[level].bp_sib_bh = NULL;
 	}
 
@@ -781,7 +879,7 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 		*keyp = nilfs_btree_node_get_key(btree, right, 0);
 		*ptrp = path[level].bp_newreq.bpr_ptr;
 
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_bh);
+		brelse(path[level].bp_bh);
 		path[level].bp_bh = path[level].bp_sib_bh;
 		path[level].bp_sib_bh = NULL;
 	} else {
@@ -790,7 +888,7 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 		*keyp = nilfs_btree_node_get_key(btree, right, 0);
 		*ptrp = path[level].bp_newreq.bpr_ptr;
 
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+		brelse(path[level].bp_sib_bh);
 		path[level].bp_sib_bh = NULL;
 	}
 
@@ -897,12 +995,12 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 	level = NILFS_BTREE_LEVEL_DATA;
 
 	/* allocate a new ptr for data block */
-	if (btree->bt_ops->btop_find_target != NULL)
+	if (NILFS_BMAP_USE_VBN(&btree->bt_bmap))
 		path[level].bp_newreq.bpr_ptr =
-			btree->bt_ops->btop_find_target(btree, path, key);
+			nilfs_btree_find_target_v(btree, path, key);
 
-	ret = btree->bt_bmap.b_pops->bpop_prepare_alloc_ptr(
-		&btree->bt_bmap, &path[level].bp_newreq);
+	ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+					   &path[level].bp_newreq);
 	if (ret < 0)
 		goto err_out_data;
 
@@ -924,8 +1022,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 		if (pindex > 0) {
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex - 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_child_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -936,7 +1033,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 				stats->bs_nblocks++;
 				goto out;
 			} else
-				nilfs_bmap_put_block(&btree->bt_bmap, bh);
+				brelse(bh);
 		}
 
 		/* right sibling */
@@ -944,8 +1041,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 		    nilfs_btree_node_get_nchildren(btree, parent) - 1) {
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex + 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_child_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -956,19 +1052,19 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 				stats->bs_nblocks++;
 				goto out;
 			} else
-				nilfs_bmap_put_block(&btree->bt_bmap, bh);
+				brelse(bh);
 		}
 
 		/* split */
 		path[level].bp_newreq.bpr_ptr =
 			path[level - 1].bp_newreq.bpr_ptr + 1;
-		ret = btree->bt_bmap.b_pops->bpop_prepare_alloc_ptr(
-			&btree->bt_bmap, &path[level].bp_newreq);
+		ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+						   &path[level].bp_newreq);
 		if (ret < 0)
 			goto err_out_child_node;
-		ret = nilfs_bmap_get_new_block(&btree->bt_bmap,
-					       path[level].bp_newreq.bpr_ptr,
-					       &bh);
+		ret = nilfs_btree_get_new_block(btree,
+						path[level].bp_newreq.bpr_ptr,
+						&bh);
 		if (ret < 0)
 			goto err_out_curr_node;
 
@@ -994,12 +1090,12 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 	/* grow */
 	path[level].bp_newreq.bpr_ptr = path[level - 1].bp_newreq.bpr_ptr + 1;
-	ret = btree->bt_bmap.b_pops->bpop_prepare_alloc_ptr(
-		&btree->bt_bmap, &path[level].bp_newreq);
+	ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+					   &path[level].bp_newreq);
 	if (ret < 0)
 		goto err_out_child_node;
-	ret = nilfs_bmap_get_new_block(&btree->bt_bmap,
-				       path[level].bp_newreq.bpr_ptr, &bh);
+	ret = nilfs_btree_get_new_block(btree, path[level].bp_newreq.bpr_ptr,
+					&bh);
 	if (ret < 0)
 		goto err_out_curr_node;
 
@@ -1023,18 +1119,16 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 	/* error */
  err_out_curr_node:
-	btree->bt_bmap.b_pops->bpop_abort_alloc_ptr(&btree->bt_bmap,
-						    &path[level].bp_newreq);
+	nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq);
  err_out_child_node:
 	for (level--; level > NILFS_BTREE_LEVEL_DATA; level--) {
-		nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_sib_bh);
-		btree->bt_bmap.b_pops->bpop_abort_alloc_ptr(
-			&btree->bt_bmap, &path[level].bp_newreq);
+		nilfs_btnode_delete(path[level].bp_sib_bh);
+		nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap,
+					   &path[level].bp_newreq);
 
 	}
 
-	btree->bt_bmap.b_pops->bpop_abort_alloc_ptr(&btree->bt_bmap,
-						       &path[level].bp_newreq);
+	nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq);
  err_out_data:
 	*levelp = level;
 	stats->bs_nblocks = 0;
@@ -1049,14 +1143,12 @@ static void nilfs_btree_commit_insert(struct nilfs_btree *btree,
 
 	set_buffer_nilfs_volatile((struct buffer_head *)((unsigned long)ptr));
 	ptr = path[NILFS_BTREE_LEVEL_DATA].bp_newreq.bpr_ptr;
-	if (btree->bt_ops->btop_set_target != NULL)
-		btree->bt_ops->btop_set_target(btree, key, ptr);
+	if (NILFS_BMAP_USE_VBN(&btree->bt_bmap))
+		nilfs_btree_set_target_v(btree, key, ptr);
 
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
-		if (btree->bt_bmap.b_pops->bpop_commit_alloc_ptr != NULL) {
-			btree->bt_bmap.b_pops->bpop_commit_alloc_ptr(
-				&btree->bt_bmap, &path[level - 1].bp_newreq);
-		}
+		nilfs_bmap_commit_alloc_ptr(&btree->bt_bmap,
+					    &path[level - 1].bp_newreq);
 		path[level].bp_op(btree, path, level, &key, &ptr);
 	}
 
@@ -1153,7 +1245,7 @@ static void nilfs_btree_borrow_left(struct nilfs_btree *btree,
 	nilfs_btree_promote_key(btree, path, level + 1,
 				nilfs_btree_node_get_key(btree, node, 0));
 
-	nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+	brelse(path[level].bp_sib_bh);
 	path[level].bp_sib_bh = NULL;
 	path[level].bp_index += n;
 }
@@ -1192,7 +1284,7 @@ static void nilfs_btree_borrow_right(struct nilfs_btree *btree,
 				nilfs_btree_node_get_key(btree, right, 0));
 	path[level + 1].bp_index--;
 
-	nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+	brelse(path[level].bp_sib_bh);
 	path[level].bp_sib_bh = NULL;
 }
 
@@ -1221,7 +1313,7 @@ static void nilfs_btree_concat_left(struct nilfs_btree *btree,
 	unlock_buffer(path[level].bp_bh);
 	unlock_buffer(path[level].bp_sib_bh);
 
-	nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_bh);
+	nilfs_btnode_delete(path[level].bp_bh);
 	path[level].bp_bh = path[level].bp_sib_bh;
 	path[level].bp_sib_bh = NULL;
 	path[level].bp_index += nilfs_btree_node_get_nchildren(btree, left);
@@ -1252,7 +1344,7 @@ static void nilfs_btree_concat_right(struct nilfs_btree *btree,
 	unlock_buffer(path[level].bp_bh);
 	unlock_buffer(path[level].bp_sib_bh);
 
-	nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_sib_bh);
+	nilfs_btnode_delete(path[level].bp_sib_bh);
 	path[level].bp_sib_bh = NULL;
 	path[level + 1].bp_index++;
 }
@@ -1276,7 +1368,7 @@ static void nilfs_btree_shrink(struct nilfs_btree *btree,
 	nilfs_btree_node_move_left(btree, root, child, n);
 	unlock_buffer(path[level].bp_bh);
 
-	nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_bh);
+	nilfs_btnode_delete(path[level].bp_bh);
 	path[level].bp_bh = NULL;
 }
 
@@ -1300,12 +1392,10 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 		path[level].bp_oldreq.bpr_ptr =
 			nilfs_btree_node_get_ptr(btree, node,
 						 path[level].bp_index);
-		if (btree->bt_bmap.b_pops->bpop_prepare_end_ptr != NULL) {
-			ret = btree->bt_bmap.b_pops->bpop_prepare_end_ptr(
-				&btree->bt_bmap, &path[level].bp_oldreq);
-			if (ret < 0)
-				goto err_out_child_node;
-		}
+		ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
+						 &path[level].bp_oldreq);
+		if (ret < 0)
+			goto err_out_child_node;
 
 		if (nilfs_btree_node_get_nchildren(btree, node) >
 		    nilfs_btree_node_nchildren_min(btree, node)) {
@@ -1321,8 +1411,7 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 			/* left sibling */
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex - 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_curr_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -1343,8 +1432,7 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 			/* right sibling */
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex + 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_curr_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -1381,12 +1469,12 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 	node = nilfs_btree_get_root(btree);
 	path[level].bp_oldreq.bpr_ptr =
 		nilfs_btree_node_get_ptr(btree, node, path[level].bp_index);
-	if (btree->bt_bmap.b_pops->bpop_prepare_end_ptr != NULL) {
-		ret = btree->bt_bmap.b_pops->bpop_prepare_end_ptr(
-			&btree->bt_bmap, &path[level].bp_oldreq);
-		if (ret < 0)
-			goto err_out_child_node;
-	}
+
+	ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
+					 &path[level].bp_oldreq);
+	if (ret < 0)
+		goto err_out_child_node;
+
 	/* child of the root node is deleted */
 	path[level].bp_op = nilfs_btree_do_delete;
 	stats->bs_nblocks++;
@@ -1398,15 +1486,12 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 
 	/* error */
  err_out_curr_node:
-	if (btree->bt_bmap.b_pops->bpop_abort_end_ptr != NULL)
-		btree->bt_bmap.b_pops->bpop_abort_end_ptr(
-			&btree->bt_bmap, &path[level].bp_oldreq);
+	nilfs_bmap_abort_end_ptr(&btree->bt_bmap, &path[level].bp_oldreq);
  err_out_child_node:
 	for (level--; level >= NILFS_BTREE_LEVEL_NODE_MIN; level--) {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
-		if (btree->bt_bmap.b_pops->bpop_abort_end_ptr != NULL)
-			btree->bt_bmap.b_pops->bpop_abort_end_ptr(
-				&btree->bt_bmap, &path[level].bp_oldreq);
+		brelse(path[level].bp_sib_bh);
+		nilfs_bmap_abort_end_ptr(&btree->bt_bmap,
+					 &path[level].bp_oldreq);
 	}
 	*levelp = level;
 	stats->bs_nblocks = 0;
@@ -1420,9 +1505,8 @@ static void nilfs_btree_commit_delete(struct nilfs_btree *btree,
 	int level;
 
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
-		if (btree->bt_bmap.b_pops->bpop_commit_end_ptr != NULL)
-			btree->bt_bmap.b_pops->bpop_commit_end_ptr(
-				&btree->bt_bmap, &path[level].bp_oldreq);
+		nilfs_bmap_commit_end_ptr(&btree->bt_bmap,
+					  &path[level].bp_oldreq);
 		path[level].bp_op(btree, path, level, NULL, NULL);
 	}
 
@@ -1501,7 +1585,7 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
 		if (nchildren > 1)
 			return 0;
 		ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
-		ret = nilfs_bmap_get_block(bmap, ptr, &bh);
+		ret = nilfs_btree_get_block(btree, ptr, &bh);
 		if (ret < 0)
 			return ret;
 		node = (struct nilfs_btree_node *)bh->b_data;
@@ -1515,9 +1599,9 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
 	nextmaxkey = (nchildren > 1) ?
 		nilfs_btree_node_get_key(btree, node, nchildren - 2) : 0;
 	if (bh != NULL)
-		nilfs_bmap_put_block(bmap, bh);
+		brelse(bh);
 
-	return (maxkey == key) && (nextmaxkey < bmap->b_low);
+	return (maxkey == key) && (nextmaxkey < NILFS_BMAP_LARGE_LOW);
 }
 
 static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
@@ -1542,7 +1626,7 @@ static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
 		nchildren = nilfs_btree_node_get_nchildren(btree, root);
 		WARN_ON(nchildren > 1);
 		ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
-		ret = nilfs_bmap_get_block(bmap, ptr, &bh);
+		ret = nilfs_btree_get_block(btree, ptr, &bh);
 		if (ret < 0)
 			return ret;
 		node = (struct nilfs_btree_node *)bh->b_data;
@@ -1563,7 +1647,7 @@ static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
 	}
 
 	if (bh != NULL)
-		nilfs_bmap_put_block(bmap, bh);
+		brelse(bh);
 
 	return nitems;
 }
@@ -1584,10 +1668,10 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 
 	/* for data */
 	/* cannot find near ptr */
-	if (btree->bt_ops->btop_find_target != NULL)
-		dreq->bpr_ptr
-			= btree->bt_ops->btop_find_target(btree, NULL, key);
-	ret = bmap->b_pops->bpop_prepare_alloc_ptr(bmap, dreq);
+	if (NILFS_BMAP_USE_VBN(bmap))
+		dreq->bpr_ptr = nilfs_btree_find_target_v(btree, NULL, key);
+
+	ret = nilfs_bmap_prepare_alloc_ptr(bmap, dreq);
 	if (ret < 0)
 		return ret;
 
@@ -1595,11 +1679,11 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 	stats->bs_nblocks++;
 	if (nreq != NULL) {
 		nreq->bpr_ptr = dreq->bpr_ptr + 1;
-		ret = bmap->b_pops->bpop_prepare_alloc_ptr(bmap, nreq);
+		ret = nilfs_bmap_prepare_alloc_ptr(bmap, nreq);
 		if (ret < 0)
 			goto err_out_dreq;
 
-		ret = nilfs_bmap_get_new_block(bmap, nreq->bpr_ptr, &bh);
+		ret = nilfs_btree_get_new_block(btree, nreq->bpr_ptr, &bh);
 		if (ret < 0)
 			goto err_out_nreq;
 
@@ -1612,9 +1696,9 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 
 	/* error */
  err_out_nreq:
-	bmap->b_pops->bpop_abort_alloc_ptr(bmap, nreq);
+	nilfs_bmap_abort_alloc_ptr(bmap, nreq);
  err_out_dreq:
-	bmap->b_pops->bpop_abort_alloc_ptr(bmap, dreq);
+	nilfs_bmap_abort_alloc_ptr(bmap, dreq);
 	stats->bs_nblocks = 0;
 	return ret;
 
@@ -1624,7 +1708,7 @@ static void
 nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 				      __u64 key, __u64 ptr,
 				      const __u64 *keys, const __u64 *ptrs,
-				      int n, __u64 low, __u64 high,
+				      int n,
 				      union nilfs_bmap_ptr_req *dreq,
 				      union nilfs_bmap_ptr_req *nreq,
 				      struct buffer_head *bh)
@@ -1642,12 +1726,10 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 
 	/* convert and insert */
 	btree = (struct nilfs_btree *)bmap;
-	nilfs_btree_init(bmap, low, high);
+	nilfs_btree_init(bmap);
 	if (nreq != NULL) {
-		if (bmap->b_pops->bpop_commit_alloc_ptr != NULL) {
-			bmap->b_pops->bpop_commit_alloc_ptr(bmap, dreq);
-			bmap->b_pops->bpop_commit_alloc_ptr(bmap, nreq);
-		}
+		nilfs_bmap_commit_alloc_ptr(bmap, dreq);
+		nilfs_bmap_commit_alloc_ptr(bmap, nreq);
 
 		/* create child node at level 1 */
 		lock_buffer(bh);
@@ -1661,7 +1743,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 			nilfs_bmap_set_dirty(bmap);
 
 		unlock_buffer(bh);
-		nilfs_bmap_put_block(bmap, bh);
+		brelse(bh);
 
 		/* create root node at level 2 */
 		node = nilfs_btree_get_root(btree);
@@ -1669,8 +1751,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 		nilfs_btree_node_init(btree, node, NILFS_BTREE_NODE_ROOT,
 				      2, 1, &keys[0], &tmpptr);
 	} else {
-		if (bmap->b_pops->bpop_commit_alloc_ptr != NULL)
-			bmap->b_pops->bpop_commit_alloc_ptr(bmap, dreq);
+		nilfs_bmap_commit_alloc_ptr(bmap, dreq);
 
 		/* create root node at level 1 */
 		node = nilfs_btree_get_root(btree);
@@ -1682,8 +1763,8 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 			nilfs_bmap_set_dirty(bmap);
 	}
 
-	if (btree->bt_ops->btop_set_target != NULL)
-		btree->bt_ops->btop_set_target(btree, key, dreq->bpr_ptr);
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_btree_set_target_v(btree, key, dreq->bpr_ptr);
 }
 
 /**
@@ -1694,13 +1775,10 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
  * @keys:
  * @ptrs:
  * @n:
- * @low:
- * @high:
  */
 int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
 				   __u64 key, __u64 ptr,
-				   const __u64 *keys, const __u64 *ptrs,
-				   int n, __u64 low, __u64 high)
+				   const __u64 *keys, const __u64 *ptrs, int n)
 {
 	struct buffer_head *bh;
 	union nilfs_bmap_ptr_req dreq, nreq, *di, *ni;
@@ -1725,7 +1803,7 @@ int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
 	if (ret < 0)
 		return ret;
 	nilfs_btree_commit_convert_and_insert(bmap, key, ptr, keys, ptrs, n,
-					      low, high, di, ni, bh);
+					      di, ni, bh);
 	nilfs_bmap_add_blocks(bmap, stats.bs_nblocks);
 	return 0;
 }
@@ -1754,9 +1832,9 @@ static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
 		nilfs_btree_node_get_ptr(btree, parent,
 					 path[level + 1].bp_index);
 	path[level].bp_newreq.bpr_ptr = path[level].bp_oldreq.bpr_ptr + 1;
-	ret = nilfs_bmap_prepare_update(&btree->bt_bmap,
-					&path[level].bp_oldreq,
-					&path[level].bp_newreq);
+	ret = nilfs_bmap_prepare_update_v(&btree->bt_bmap,
+					  &path[level].bp_oldreq,
+					  &path[level].bp_newreq);
 	if (ret < 0)
 		return ret;
 
@@ -1768,9 +1846,9 @@ static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
 			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
 			&path[level].bp_ctxt);
 		if (ret < 0) {
-			nilfs_bmap_abort_update(&btree->bt_bmap,
-						&path[level].bp_oldreq,
-						&path[level].bp_newreq);
+			nilfs_bmap_abort_update_v(&btree->bt_bmap,
+						  &path[level].bp_oldreq,
+						  &path[level].bp_newreq);
 			return ret;
 		}
 	}
@@ -1784,9 +1862,9 @@ static void nilfs_btree_commit_update_v(struct nilfs_btree *btree,
 {
 	struct nilfs_btree_node *parent;
 
-	nilfs_bmap_commit_update(&btree->bt_bmap,
-				 &path[level].bp_oldreq,
-				 &path[level].bp_newreq);
+	nilfs_bmap_commit_update_v(&btree->bt_bmap,
+				   &path[level].bp_oldreq,
+				   &path[level].bp_newreq);
 
 	if (buffer_nilfs_node(path[level].bp_bh)) {
 		nilfs_btnode_commit_change_key(
@@ -1805,9 +1883,9 @@ static void nilfs_btree_abort_update_v(struct nilfs_btree *btree,
 				       struct nilfs_btree_path *path,
 				       int level)
 {
-	nilfs_bmap_abort_update(&btree->bt_bmap,
-				&path[level].bp_oldreq,
-				&path[level].bp_newreq);
+	nilfs_bmap_abort_update_v(&btree->bt_bmap,
+				  &path[level].bp_oldreq,
+				  &path[level].bp_newreq);
 	if (buffer_nilfs_node(path[level].bp_bh))
 		nilfs_btnode_abort_change_key(
 			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
@@ -1930,7 +2008,9 @@ static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
 		goto out;
 	}
 
-	ret = btree->bt_ops->btop_propagate(btree, path, level, bh);
+	ret = NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_btree_propagate_v(btree, path, level, bh) :
+		nilfs_btree_propagate_p(btree, path, level, bh);
 
  out:
 	nilfs_btree_clear_path(btree, path);
@@ -2066,12 +2146,9 @@ static int nilfs_btree_assign_v(struct nilfs_btree *btree,
 	ptr = nilfs_btree_node_get_ptr(btree, parent,
 				       path[level + 1].bp_index);
 	req.bpr_ptr = ptr;
-	ret = btree->bt_bmap.b_pops->bpop_prepare_start_ptr(&btree->bt_bmap,
-							       &req);
-	if (ret < 0)
+	ret = nilfs_bmap_start_v(&btree->bt_bmap, &req, blocknr);
+	if (unlikely(ret < 0))
 		return ret;
-	btree->bt_bmap.b_pops->bpop_commit_start_ptr(&btree->bt_bmap,
-							&req, blocknr);
 
 	key = nilfs_btree_node_get_key(btree, parent,
 				       path[level + 1].bp_index);
@@ -2114,8 +2191,9 @@ static int nilfs_btree_assign(struct nilfs_bmap *bmap,
 		goto out;
 	}
 
-	ret = btree->bt_ops->btop_assign(btree, path, level, bh,
-					    blocknr, binfo);
+	ret = NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_btree_assign_v(btree, path, level, bh, blocknr, binfo) :
+		nilfs_btree_assign_p(btree, path, level, bh, blocknr, binfo);
 
  out:
 	nilfs_btree_clear_path(btree, path);
@@ -2171,7 +2249,7 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 		WARN_ON(ret == -ENOENT);
 		goto out;
 	}
-	ret = nilfs_bmap_get_block(&btree->bt_bmap, ptr, &bh);
+	ret = nilfs_btree_get_block(btree, ptr, &bh);
 	if (ret < 0) {
 		WARN_ON(ret == -ENOENT);
 		goto out;
@@ -2179,7 +2257,7 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 
 	if (!buffer_dirty(bh))
 		nilfs_btnode_mark_dirty(bh);
-	nilfs_bmap_put_block(&btree->bt_bmap, bh);
+	brelse(bh);
 	if (!nilfs_bmap_dirty(&btree->bt_bmap))
 		nilfs_bmap_set_dirty(&btree->bt_bmap);
 
@@ -2191,6 +2269,7 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 
 static const struct nilfs_bmap_operations nilfs_btree_ops = {
 	.bop_lookup		=	nilfs_btree_lookup,
+	.bop_lookup_contig	=	nilfs_btree_lookup_contig,
 	.bop_insert		=	nilfs_btree_insert,
 	.bop_delete		=	nilfs_btree_delete,
 	.bop_clear		=	NULL,
@@ -2210,6 +2289,7 @@ static const struct nilfs_bmap_operations nilfs_btree_ops = {
 
 static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 	.bop_lookup		=	NULL,
+	.bop_lookup_contig	=	NULL,
 	.bop_insert		=	NULL,
 	.bop_delete		=	NULL,
 	.bop_clear		=	NULL,
@@ -2227,43 +2307,13 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 	.bop_gather_data	=	NULL,
 };
 
-static const struct nilfs_btree_operations nilfs_btree_ops_v = {
-	.btop_find_target	=	nilfs_btree_find_target_v,
-	.btop_set_target	=	nilfs_btree_set_target_v,
-	.btop_propagate		=	nilfs_btree_propagate_v,
-	.btop_assign		=	nilfs_btree_assign_v,
-};
-
-static const struct nilfs_btree_operations nilfs_btree_ops_p = {
-	.btop_find_target	=	NULL,
-	.btop_set_target	=	NULL,
-	.btop_propagate		=	nilfs_btree_propagate_p,
-	.btop_assign		=	nilfs_btree_assign_p,
-};
-
-int nilfs_btree_init(struct nilfs_bmap *bmap, __u64 low, __u64 high)
+int nilfs_btree_init(struct nilfs_bmap *bmap)
 {
-	struct nilfs_btree *btree;
-
-	btree = (struct nilfs_btree *)bmap;
 	bmap->b_ops = &nilfs_btree_ops;
-	bmap->b_low = low;
-	bmap->b_high = high;
-	switch (bmap->b_inode->i_ino) {
-	case NILFS_DAT_INO:
-		btree->bt_ops = &nilfs_btree_ops_p;
-		break;
-	default:
-		btree->bt_ops = &nilfs_btree_ops_v;
-		break;
-	}
-
 	return 0;
 }
 
 void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
 {
-	bmap->b_low = NILFS_BMAP_LARGE_LOW;
-	bmap->b_high = NILFS_BMAP_LARGE_HIGH;
 	bmap->b_ops = &nilfs_btree_ops_gc;
 }
diff --git a/fs/nilfs2/btree.h b/fs/nilfs2/btree.h
index 4766deb52fb..0e72bbbc6b6 100644
--- a/fs/nilfs2/btree.h
+++ b/fs/nilfs2/btree.h
@@ -34,28 +34,6 @@ struct nilfs_btree;
 struct nilfs_btree_path;
 
 /**
- * struct nilfs_btree_operations - B-tree operation table
- */
-struct nilfs_btree_operations {
-	__u64 (*btop_find_target)(const struct nilfs_btree *,
-				  const struct nilfs_btree_path *, __u64);
-	void (*btop_set_target)(struct nilfs_btree *, __u64, __u64);
-
-	struct the_nilfs *(*btop_get_nilfs)(struct nilfs_btree *);
-
-	int (*btop_propagate)(struct nilfs_btree *,
-			      struct nilfs_btree_path *,
-			      int,
-			      struct buffer_head *);
-	int (*btop_assign)(struct nilfs_btree *,
-			   struct nilfs_btree_path *,
-			   int,
-			   struct buffer_head **,
-			   sector_t,
-			   union nilfs_binfo *);
-};
-
-/**
  * struct nilfs_btree_node - B-tree node
  * @bn_flags: flags
  * @bn_level: level
@@ -80,13 +58,9 @@ struct nilfs_btree_node {
 /**
  * struct nilfs_btree - B-tree structure
  * @bt_bmap: bmap base structure
- * @bt_ops: B-tree operation table
  */
 struct nilfs_btree {
 	struct nilfs_bmap bt_bmap;
-
-	/* B-tree-specific members */
-	const struct nilfs_btree_operations *bt_ops;
 };
 
 
@@ -108,10 +82,9 @@ struct nilfs_btree {
 
 int nilfs_btree_path_cache_init(void);
 void nilfs_btree_path_cache_destroy(void);
-int nilfs_btree_init(struct nilfs_bmap *, __u64, __u64);
+int nilfs_btree_init(struct nilfs_bmap *);
 int nilfs_btree_convert_and_insert(struct nilfs_bmap *, __u64, __u64,
-				   const __u64 *, const __u64 *,
-				   int, __u64, __u64);
+				   const __u64 *, const __u64 *, int);
 void nilfs_btree_init_gc(struct nilfs_bmap *);
 
 #endif	/* _NILFS_BTREE_H */
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index 300f1cdfa86..7d49813f66d 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -295,10 +295,6 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 		return -EINVAL;
 	}
 
-	/* cannot delete the latest checkpoint */
-	if (start == nilfs_mdt_cno(cpfile) - 1)
-		return -EPERM;
-
 	down_write(&NILFS_MDT(cpfile)->mi_sem);
 
 	ret = nilfs_cpfile_get_header_block(cpfile, &header_bh);
@@ -384,9 +380,10 @@ static void nilfs_cpfile_checkpoint_to_cpinfo(struct inode *cpfile,
 }
 
 static ssize_t nilfs_cpfile_do_get_cpinfo(struct inode *cpfile, __u64 *cnop,
-					  struct nilfs_cpinfo *ci, size_t nci)
+					  void *buf, unsigned cisz, size_t nci)
 {
 	struct nilfs_checkpoint *cp;
+	struct nilfs_cpinfo *ci = buf;
 	struct buffer_head *bh;
 	size_t cpsz = NILFS_MDT(cpfile)->mi_entry_size;
 	__u64 cur_cno = nilfs_mdt_cno(cpfile), cno = *cnop;
@@ -410,17 +407,22 @@ static ssize_t nilfs_cpfile_do_get_cpinfo(struct inode *cpfile, __u64 *cnop,
 		kaddr = kmap_atomic(bh->b_page, KM_USER0);
 		cp = nilfs_cpfile_block_get_checkpoint(cpfile, cno, bh, kaddr);
 		for (i = 0; i < ncps && n < nci; i++, cp = (void *)cp + cpsz) {
-			if (!nilfs_checkpoint_invalid(cp))
-				nilfs_cpfile_checkpoint_to_cpinfo(
-					cpfile, cp, &ci[n++]);
+			if (!nilfs_checkpoint_invalid(cp)) {
+				nilfs_cpfile_checkpoint_to_cpinfo(cpfile, cp,
+								  ci);
+				ci = (void *)ci + cisz;
+				n++;
+			}
 		}
 		kunmap_atomic(kaddr, KM_USER0);
 		brelse(bh);
 	}
 
 	ret = n;
-	if (n > 0)
-		*cnop = ci[n - 1].ci_cno + 1;
+	if (n > 0) {
+		ci = (void *)ci - cisz;
+		*cnop = ci->ci_cno + 1;
+	}
 
  out:
 	up_read(&NILFS_MDT(cpfile)->mi_sem);
@@ -428,11 +430,12 @@ static ssize_t nilfs_cpfile_do_get_cpinfo(struct inode *cpfile, __u64 *cnop,
 }
 
 static ssize_t nilfs_cpfile_do_get_ssinfo(struct inode *cpfile, __u64 *cnop,
-					  struct nilfs_cpinfo *ci, size_t nci)
+					  void *buf, unsigned cisz, size_t nci)
 {
 	struct buffer_head *bh;
 	struct nilfs_cpfile_header *header;
 	struct nilfs_checkpoint *cp;
+	struct nilfs_cpinfo *ci = buf;
 	__u64 curr = *cnop, next;
 	unsigned long curr_blkoff, next_blkoff;
 	void *kaddr;
@@ -472,7 +475,9 @@ static ssize_t nilfs_cpfile_do_get_ssinfo(struct inode *cpfile, __u64 *cnop,
 		if (unlikely(nilfs_checkpoint_invalid(cp) ||
 			     !nilfs_checkpoint_snapshot(cp)))
 			break;
-		nilfs_cpfile_checkpoint_to_cpinfo(cpfile, cp, &ci[n++]);
+		nilfs_cpfile_checkpoint_to_cpinfo(cpfile, cp, ci);
+		ci = (void *)ci + cisz;
+		n++;
 		next = le64_to_cpu(cp->cp_snapshot_list.ssl_next);
 		if (next == 0)
 			break; /* reach end of the snapshot list */
@@ -511,13 +516,13 @@ static ssize_t nilfs_cpfile_do_get_ssinfo(struct inode *cpfile, __u64 *cnop,
  */
 
 ssize_t nilfs_cpfile_get_cpinfo(struct inode *cpfile, __u64 *cnop, int mode,
-				struct nilfs_cpinfo *ci, size_t nci)
+				void *buf, unsigned cisz, size_t nci)
 {
 	switch (mode) {
 	case NILFS_CHECKPOINT:
-		return nilfs_cpfile_do_get_cpinfo(cpfile, cnop, ci, nci);
+		return nilfs_cpfile_do_get_cpinfo(cpfile, cnop, buf, cisz, nci);
 	case NILFS_SNAPSHOT:
-		return nilfs_cpfile_do_get_ssinfo(cpfile, cnop, ci, nci);
+		return nilfs_cpfile_do_get_ssinfo(cpfile, cnop, buf, cisz, nci);
 	default:
 		return -EINVAL;
 	}
@@ -533,20 +538,14 @@ int nilfs_cpfile_delete_checkpoint(struct inode *cpfile, __u64 cno)
 	struct nilfs_cpinfo ci;
 	__u64 tcno = cno;
 	ssize_t nci;
-	int ret;
 
-	nci = nilfs_cpfile_do_get_cpinfo(cpfile, &tcno, &ci, 1);
+	nci = nilfs_cpfile_do_get_cpinfo(cpfile, &tcno, &ci, sizeof(ci), 1);
 	if (nci < 0)
 		return nci;
 	else if (nci == 0 || ci.ci_cno != cno)
 		return -ENOENT;
-
-	/* cannot delete the latest checkpoint nor snapshots */
-	ret = nilfs_cpinfo_snapshot(&ci);
-	if (ret < 0)
-		return ret;
-	else if (ret > 0 || cno == nilfs_mdt_cno(cpfile) - 1)
-		return -EPERM;
+	else if (nilfs_cpinfo_snapshot(&ci))
+		return -EBUSY;
 
 	return nilfs_cpfile_delete_checkpoints(cpfile, cno, cno + 1);
 }
@@ -864,11 +863,11 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode)
 	case NILFS_CHECKPOINT:
 		/*
 		 * Check for protecting existing snapshot mounts:
-		 * bd_mount_sem is used to make this operation atomic and
+		 * ns_mount_mutex is used to make this operation atomic and
 		 * exclusive with a new mount job.  Though it doesn't cover
 		 * umount, it's enough for the purpose.
 		 */
-		down(&nilfs->ns_bdev->bd_mount_sem);
+		mutex_lock(&nilfs->ns_mount_mutex);
 		if (nilfs_checkpoint_is_mounted(nilfs, cno, 1)) {
 			/* Current implementation does not have to protect
 			   plain read-only mounts since they are exclusive
@@ -877,7 +876,7 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode)
 			ret = -EBUSY;
 		} else
 			ret = nilfs_cpfile_clear_snapshot(cpfile, cno);
-		up(&nilfs->ns_bdev->bd_mount_sem);
+		mutex_unlock(&nilfs->ns_mount_mutex);
 		return ret;
 	case NILFS_SNAPSHOT:
 		return nilfs_cpfile_set_snapshot(cpfile, cno);
diff --git a/fs/nilfs2/cpfile.h b/fs/nilfs2/cpfile.h
index 1a8a1008c34..788a4595019 100644
--- a/fs/nilfs2/cpfile.h
+++ b/fs/nilfs2/cpfile.h
@@ -39,7 +39,7 @@ int nilfs_cpfile_delete_checkpoint(struct inode *, __u64);
 int nilfs_cpfile_change_cpmode(struct inode *, __u64, int);
 int nilfs_cpfile_is_snapshot(struct inode *, __u64);
 int nilfs_cpfile_get_stat(struct inode *, struct nilfs_cpstat *);
-ssize_t nilfs_cpfile_get_cpinfo(struct inode *, __u64 *, int,
-				struct nilfs_cpinfo *, size_t);
+ssize_t nilfs_cpfile_get_cpinfo(struct inode *, __u64 *, int, void *, unsigned,
+				size_t);
 
 #endif	/* _NILFS_CPFILE_H */
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index bb8a5818e7f..0b2710e2d56 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -92,21 +92,6 @@ void nilfs_dat_abort_alloc(struct inode *dat, struct nilfs_palloc_req *req)
 	nilfs_palloc_abort_alloc_entry(dat, req);
 }
 
-int nilfs_dat_prepare_free(struct inode *dat, struct nilfs_palloc_req *req)
-{
-	int ret;
-
-	ret = nilfs_palloc_prepare_free_entry(dat, req);
-	if (ret < 0)
-		return ret;
-	ret = nilfs_dat_prepare_entry(dat, req, 0);
-	if (ret < 0) {
-		nilfs_palloc_abort_free_entry(dat, req);
-		return ret;
-	}
-	return 0;
-}
-
 void nilfs_dat_commit_free(struct inode *dat, struct nilfs_palloc_req *req)
 {
 	struct nilfs_dat_entry *entry;
@@ -391,36 +376,37 @@ int nilfs_dat_translate(struct inode *dat, __u64 vblocknr, sector_t *blocknrp)
 	return ret;
 }
 
-ssize_t nilfs_dat_get_vinfo(struct inode *dat, struct nilfs_vinfo *vinfo,
+ssize_t nilfs_dat_get_vinfo(struct inode *dat, void *buf, unsigned visz,
 			    size_t nvi)
 {
 	struct buffer_head *entry_bh;
 	struct nilfs_dat_entry *entry;
+	struct nilfs_vinfo *vinfo = buf;
 	__u64 first, last;
 	void *kaddr;
 	unsigned long entries_per_block = NILFS_MDT(dat)->mi_entries_per_block;
 	int i, j, n, ret;
 
 	for (i = 0; i < nvi; i += n) {
-		ret = nilfs_palloc_get_entry_block(dat, vinfo[i].vi_vblocknr,
+		ret = nilfs_palloc_get_entry_block(dat, vinfo->vi_vblocknr,
 						   0, &entry_bh);
 		if (ret < 0)
 			return ret;
 		kaddr = kmap_atomic(entry_bh->b_page, KM_USER0);
 		/* last virtual block number in this block */
-		first = vinfo[i].vi_vblocknr;
+		first = vinfo->vi_vblocknr;
 		do_div(first, entries_per_block);
 		first *= entries_per_block;
 		last = first + entries_per_block - 1;
 		for (j = i, n = 0;
-		     j < nvi && vinfo[j].vi_vblocknr >= first &&
-			     vinfo[j].vi_vblocknr <= last;
-		     j++, n++) {
+		     j < nvi && vinfo->vi_vblocknr >= first &&
+			     vinfo->vi_vblocknr <= last;
+		     j++, n++, vinfo = (void *)vinfo + visz) {
 			entry = nilfs_palloc_block_get_entry(
-				dat, vinfo[j].vi_vblocknr, entry_bh, kaddr);
-			vinfo[j].vi_start = le64_to_cpu(entry->de_start);
-			vinfo[j].vi_end = le64_to_cpu(entry->de_end);
-			vinfo[j].vi_blocknr = le64_to_cpu(entry->de_blocknr);
+				dat, vinfo->vi_vblocknr, entry_bh, kaddr);
+			vinfo->vi_start = le64_to_cpu(entry->de_start);
+			vinfo->vi_end = le64_to_cpu(entry->de_end);
+			vinfo->vi_blocknr = le64_to_cpu(entry->de_blocknr);
 		}
 		kunmap_atomic(kaddr, KM_USER0);
 		brelse(entry_bh);
diff --git a/fs/nilfs2/dat.h b/fs/nilfs2/dat.h
index d9560654a4b..d328b81eead 100644
--- a/fs/nilfs2/dat.h
+++ b/fs/nilfs2/dat.h
@@ -47,6 +47,6 @@ void nilfs_dat_abort_end(struct inode *, struct nilfs_palloc_req *);
 int nilfs_dat_mark_dirty(struct inode *, __u64);
 int nilfs_dat_freev(struct inode *, __u64 *, size_t);
 int nilfs_dat_move(struct inode *, __u64, sector_t);
-ssize_t nilfs_dat_get_vinfo(struct inode *, struct nilfs_vinfo *, size_t);
+ssize_t nilfs_dat_get_vinfo(struct inode *, void *, unsigned, size_t);
 
 #endif	/* _NILFS_DAT_H */
diff --git a/fs/nilfs2/direct.c b/fs/nilfs2/direct.c
index c6379e48278..342d9765df8 100644
--- a/fs/nilfs2/direct.c
+++ b/fs/nilfs2/direct.c
@@ -25,6 +25,7 @@
 #include "page.h"
 #include "direct.h"
 #include "alloc.h"
+#include "dat.h"
 
 static inline __le64 *nilfs_direct_dptrs(const struct nilfs_direct *direct)
 {
@@ -62,6 +63,47 @@ static int nilfs_direct_lookup(const struct nilfs_bmap *bmap,
 	return 0;
 }
 
+static int nilfs_direct_lookup_contig(const struct nilfs_bmap *bmap,
+				      __u64 key, __u64 *ptrp,
+				      unsigned maxblocks)
+{
+	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
+	struct inode *dat = NULL;
+	__u64 ptr, ptr2;
+	sector_t blocknr;
+	int ret, cnt;
+
+	if (key > NILFS_DIRECT_KEY_MAX ||
+	    (ptr = nilfs_direct_get_ptr(direct, key)) ==
+	    NILFS_BMAP_INVALID_PTR)
+		return -ENOENT;
+
+	if (NILFS_BMAP_USE_VBN(bmap)) {
+		dat = nilfs_bmap_get_dat(bmap);
+		ret = nilfs_dat_translate(dat, ptr, &blocknr);
+		if (ret < 0)
+			return ret;
+		ptr = blocknr;
+	}
+
+	maxblocks = min_t(unsigned, maxblocks, NILFS_DIRECT_KEY_MAX - key + 1);
+	for (cnt = 1; cnt < maxblocks &&
+		     (ptr2 = nilfs_direct_get_ptr(direct, key + cnt)) !=
+		     NILFS_BMAP_INVALID_PTR;
+	     cnt++) {
+		if (dat) {
+			ret = nilfs_dat_translate(dat, ptr2, &blocknr);
+			if (ret < 0)
+				return ret;
+			ptr2 = blocknr;
+		}
+		if (ptr2 != ptr + cnt)
+			break;
+	}
+	*ptrp = ptr;
+	return cnt;
+}
+
 static __u64
 nilfs_direct_find_target_v(const struct nilfs_direct *direct, __u64 key)
 {
@@ -90,10 +132,9 @@ static int nilfs_direct_prepare_insert(struct nilfs_direct *direct,
 {
 	int ret;
 
-	if (direct->d_ops->dop_find_target != NULL)
-		req->bpr_ptr = direct->d_ops->dop_find_target(direct, key);
-	ret = direct->d_bmap.b_pops->bpop_prepare_alloc_ptr(&direct->d_bmap,
-							       req);
+	if (NILFS_BMAP_USE_VBN(&direct->d_bmap))
+		req->bpr_ptr = nilfs_direct_find_target_v(direct, key);
+	ret = nilfs_bmap_prepare_alloc_ptr(&direct->d_bmap, req);
 	if (ret < 0)
 		return ret;
 
@@ -111,16 +152,14 @@ static void nilfs_direct_commit_insert(struct nilfs_direct *direct,
 	bh = (struct buffer_head *)((unsigned long)ptr);
 	set_buffer_nilfs_volatile(bh);
 
-	if (direct->d_bmap.b_pops->bpop_commit_alloc_ptr != NULL)
-		direct->d_bmap.b_pops->bpop_commit_alloc_ptr(
-			&direct->d_bmap, req);
+	nilfs_bmap_commit_alloc_ptr(&direct->d_bmap, req);
 	nilfs_direct_set_ptr(direct, key, req->bpr_ptr);
 
 	if (!nilfs_bmap_dirty(&direct->d_bmap))
 		nilfs_bmap_set_dirty(&direct->d_bmap);
 
-	if (direct->d_ops->dop_set_target != NULL)
-		direct->d_ops->dop_set_target(direct, key, req->bpr_ptr);
+	if (NILFS_BMAP_USE_VBN(&direct->d_bmap))
+		nilfs_direct_set_target_v(direct, key, req->bpr_ptr);
 }
 
 static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
@@ -152,25 +191,18 @@ static int nilfs_direct_prepare_delete(struct nilfs_direct *direct,
 {
 	int ret;
 
-	if (direct->d_bmap.b_pops->bpop_prepare_end_ptr != NULL) {
-		req->bpr_ptr = nilfs_direct_get_ptr(direct, key);
-		ret = direct->d_bmap.b_pops->bpop_prepare_end_ptr(
-			&direct->d_bmap, req);
-		if (ret < 0)
-			return ret;
-	}
-
-	stats->bs_nblocks = 1;
-	return 0;
+	req->bpr_ptr = nilfs_direct_get_ptr(direct, key);
+	ret = nilfs_bmap_prepare_end_ptr(&direct->d_bmap, req);
+	if (!ret)
+		stats->bs_nblocks = 1;
+	return ret;
 }
 
 static void nilfs_direct_commit_delete(struct nilfs_direct *direct,
 				       union nilfs_bmap_ptr_req *req,
 				       __u64 key)
 {
-	if (direct->d_bmap.b_pops->bpop_commit_end_ptr != NULL)
-		direct->d_bmap.b_pops->bpop_commit_end_ptr(
-			&direct->d_bmap, req);
+	nilfs_bmap_commit_end_ptr(&direct->d_bmap, req);
 	nilfs_direct_set_ptr(direct, key, NILFS_BMAP_INVALID_PTR);
 }
 
@@ -244,8 +276,7 @@ static int nilfs_direct_gather_data(struct nilfs_bmap *bmap,
 }
 
 int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
-				    __u64 key, __u64 *keys, __u64 *ptrs,
-				    int n, __u64 low, __u64 high)
+				    __u64 key, __u64 *keys, __u64 *ptrs, int n)
 {
 	struct nilfs_direct *direct;
 	__le64 *dptrs;
@@ -275,8 +306,7 @@ int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
 			dptrs[i] = NILFS_BMAP_INVALID_PTR;
 	}
 
-	nilfs_direct_init(bmap, low, high);
-
+	nilfs_direct_init(bmap);
 	return 0;
 }
 
@@ -293,11 +323,11 @@ static int nilfs_direct_propagate_v(struct nilfs_direct *direct,
 	if (!buffer_nilfs_volatile(bh)) {
 		oldreq.bpr_ptr = ptr;
 		newreq.bpr_ptr = ptr;
-		ret = nilfs_bmap_prepare_update(&direct->d_bmap, &oldreq,
-						&newreq);
+		ret = nilfs_bmap_prepare_update_v(&direct->d_bmap, &oldreq,
+						  &newreq);
 		if (ret < 0)
 			return ret;
-		nilfs_bmap_commit_update(&direct->d_bmap, &oldreq, &newreq);
+		nilfs_bmap_commit_update_v(&direct->d_bmap, &oldreq, &newreq);
 		set_buffer_nilfs_volatile(bh);
 		nilfs_direct_set_ptr(direct, key, newreq.bpr_ptr);
 	} else
@@ -309,12 +339,10 @@ static int nilfs_direct_propagate_v(struct nilfs_direct *direct,
 static int nilfs_direct_propagate(const struct nilfs_bmap *bmap,
 				  struct buffer_head *bh)
 {
-	struct nilfs_direct *direct;
+	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
 
-	direct = (struct nilfs_direct *)bmap;
-	return (direct->d_ops->dop_propagate != NULL) ?
-		direct->d_ops->dop_propagate(direct, bh) :
-		0;
+	return NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_direct_propagate_v(direct, bh) : 0;
 }
 
 static int nilfs_direct_assign_v(struct nilfs_direct *direct,
@@ -327,12 +355,9 @@ static int nilfs_direct_assign_v(struct nilfs_direct *direct,
 	int ret;
 
 	req.bpr_ptr = ptr;
-	ret = direct->d_bmap.b_pops->bpop_prepare_start_ptr(
-		&direct->d_bmap, &req);
-	if (ret < 0)
+	ret = nilfs_bmap_start_v(&direct->d_bmap, &req, blocknr);
+	if (unlikely(ret < 0))
 		return ret;
-	direct->d_bmap.b_pops->bpop_commit_start_ptr(&direct->d_bmap,
-						     &req, blocknr);
 
 	binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
 	binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
@@ -377,12 +402,14 @@ static int nilfs_direct_assign(struct nilfs_bmap *bmap,
 		return -EINVAL;
 	}
 
-	return direct->d_ops->dop_assign(direct, key, ptr, bh,
-					 blocknr, binfo);
+	return NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_direct_assign_v(direct, key, ptr, bh, blocknr, binfo) :
+		nilfs_direct_assign_p(direct, key, ptr, bh, blocknr, binfo);
 }
 
 static const struct nilfs_bmap_operations nilfs_direct_ops = {
 	.bop_lookup		=	nilfs_direct_lookup,
+	.bop_lookup_contig	=	nilfs_direct_lookup_contig,
 	.bop_insert		=	nilfs_direct_insert,
 	.bop_delete		=	nilfs_direct_delete,
 	.bop_clear		=	NULL,
@@ -401,36 +428,8 @@ static const struct nilfs_bmap_operations nilfs_direct_ops = {
 };
 
 
-static const struct nilfs_direct_operations nilfs_direct_ops_v = {
-	.dop_find_target	=	nilfs_direct_find_target_v,
-	.dop_set_target		=	nilfs_direct_set_target_v,
-	.dop_propagate		=	nilfs_direct_propagate_v,
-	.dop_assign		=	nilfs_direct_assign_v,
-};
-
-static const struct nilfs_direct_operations nilfs_direct_ops_p = {
-	.dop_find_target	=	NULL,
-	.dop_set_target		=	NULL,
-	.dop_propagate		=	NULL,
-	.dop_assign		=	nilfs_direct_assign_p,
-};
-
-int nilfs_direct_init(struct nilfs_bmap *bmap, __u64 low, __u64 high)
+int nilfs_direct_init(struct nilfs_bmap *bmap)
 {
-	struct nilfs_direct *direct;
-
-	direct = (struct nilfs_direct *)bmap;
 	bmap->b_ops = &nilfs_direct_ops;
-	bmap->b_low = low;
-	bmap->b_high = high;
-	switch (bmap->b_inode->i_ino) {
-	case NILFS_DAT_INO:
-		direct->d_ops = &nilfs_direct_ops_p;
-		break;
-	default:
-		direct->d_ops = &nilfs_direct_ops_v;
-		break;
-	}
-
 	return 0;
 }
diff --git a/fs/nilfs2/direct.h b/fs/nilfs2/direct.h
index 45d2c5cda81..a5ffd66e25d 100644
--- a/fs/nilfs2/direct.h
+++ b/fs/nilfs2/direct.h
@@ -31,18 +31,6 @@
 struct nilfs_direct;
 
 /**
- * struct nilfs_direct_operations - direct mapping operation table
- */
-struct nilfs_direct_operations {
-	__u64 (*dop_find_target)(const struct nilfs_direct *, __u64);
-	void (*dop_set_target)(struct nilfs_direct *, __u64, __u64);
-	int (*dop_propagate)(struct nilfs_direct *, struct buffer_head *);
-	int (*dop_assign)(struct nilfs_direct *, __u64, __u64,
-			  struct buffer_head **, sector_t,
-			  union nilfs_binfo *);
-};
-
-/**
  * struct nilfs_direct_node - direct node
  * @dn_flags: flags
  * @dn_pad: padding
@@ -55,13 +43,9 @@ struct nilfs_direct_node {
 /**
  * struct nilfs_direct - direct mapping
  * @d_bmap: bmap structure
- * @d_ops: direct mapping operation table
  */
 struct nilfs_direct {
 	struct nilfs_bmap d_bmap;
-
-	/* direct-mapping-specific members */
-	const struct nilfs_direct_operations *d_ops;
 };
 
 
@@ -70,9 +54,9 @@ struct nilfs_direct {
 #define NILFS_DIRECT_KEY_MAX	(NILFS_DIRECT_NBLOCKS - 1)
 
 
-int nilfs_direct_init(struct nilfs_bmap *, __u64, __u64);
+int nilfs_direct_init(struct nilfs_bmap *);
 int nilfs_direct_delete_and_convert(struct nilfs_bmap *, __u64, __u64 *,
-				    __u64 *, int, __u64, __u64);
+				    __u64 *, int);
 
 
 #endif	/* _NILFS_DIRECT_H */
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 19d2102b6a6..1b3c2bb20da 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -52,8 +52,9 @@
 #include "dat.h"
 #include "ifile.h"
 
-static struct address_space_operations def_gcinode_aops = {};
-/* XXX need def_gcinode_iops/fops? */
+static struct address_space_operations def_gcinode_aops = {
+	.sync_page		= block_sync_page,
+};
 
 /*
  * nilfs_gccache_submit_read_data() - add data buffer and submit read request
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 49ab4a49bb4..2696d6b513b 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -43,22 +43,23 @@
  *
  * This function does not issue actual read request of the specified data
  * block. It is done by VFS.
- * Bulk read for direct-io is not supported yet. (should be supported)
  */
 int nilfs_get_block(struct inode *inode, sector_t blkoff,
 		    struct buffer_head *bh_result, int create)
 {
 	struct nilfs_inode_info *ii = NILFS_I(inode);
-	unsigned long blknum = 0;
+	__u64 blknum = 0;
 	int err = 0, ret;
 	struct inode *dat = nilfs_dat_inode(NILFS_I_NILFS(inode));
+	unsigned maxblocks = bh_result->b_size >> inode->i_blkbits;
 
-	/* This exclusion control is a workaround; should be revised */
-	down_read(&NILFS_MDT(dat)->mi_sem);	/* XXX */
-	ret = nilfs_bmap_lookup(ii->i_bmap, (unsigned long)blkoff, &blknum);
-	up_read(&NILFS_MDT(dat)->mi_sem);	/* XXX */
-	if (ret == 0) {	/* found */
+	down_read(&NILFS_MDT(dat)->mi_sem);
+	ret = nilfs_bmap_lookup_contig(ii->i_bmap, blkoff, &blknum, maxblocks);
+	up_read(&NILFS_MDT(dat)->mi_sem);
+	if (ret >= 0) {	/* found */
 		map_bh(bh_result, inode->i_sb, blknum);
+		if (ret > 0)
+			bh_result->b_size = (ret << inode->i_blkbits);
 		goto out;
 	}
 	/* data block was not found */
@@ -240,7 +241,7 @@ nilfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
 struct address_space_operations nilfs_aops = {
 	.writepage		= nilfs_writepage,
 	.readpage		= nilfs_readpage,
-	/* .sync_page		= nilfs_sync_page, */
+	.sync_page		= block_sync_page,
 	.writepages		= nilfs_writepages,
 	.set_page_dirty		= nilfs_set_page_dirty,
 	.readpages		= nilfs_readpages,
@@ -249,6 +250,7 @@ struct address_space_operations nilfs_aops = {
 	/* .releasepage		= nilfs_releasepage, */
 	.invalidatepage		= block_invalidatepage,
 	.direct_IO		= nilfs_direct_IO,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 struct inode *nilfs_new_inode(struct inode *dir, int mode)
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index d6759b92006..6ea5f872e2d 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -152,7 +152,7 @@ nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 
 	down_read(&nilfs->ns_segctor_sem);
 	ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
-				      nmembs);
+				      size, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
 	return ret;
 }
@@ -182,7 +182,8 @@ nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	int ret;
 
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
+	ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, size,
+				      nmembs);
 	up_read(&nilfs->ns_segctor_sem);
 	return ret;
 }
@@ -212,7 +213,7 @@ nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	int ret;
 
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
+	ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, size, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
 	return ret;
 }
@@ -435,24 +436,6 @@ static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
 	return nmembs;
 }
 
-static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
-				     struct nilfs_argv *argv, void *buf)
-{
-	size_t nmembs = argv->v_nmembs;
-	struct nilfs_sb_info *sbi = nilfs->ns_writer;
-	int ret;
-
-	if (unlikely(!sbi)) {
-		/* never happens because called for a writable mount */
-		WARN_ON(1);
-		return -EROFS;
-	}
-	ret = nilfs_segctor_add_segments_to_be_freed(
-		NILFS_SC(sbi), buf, nmembs);
-
-	return (ret < 0) ? ret : nmembs;
-}
-
 int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 				       struct nilfs_argv *argv, void **kbufs)
 {
@@ -491,14 +474,6 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot mark copying blocks dirty";
 		goto failed;
 	}
-	ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
-	if (ret < 0) {
-		/*
-		 * can safely abort because this operation is atomic.
-		 */
-		msg = "cannot set segments to be freed";
-		goto failed;
-	}
 	return 0;
 
  failed:
@@ -615,7 +590,7 @@ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
-	if (argv.v_size != membsz)
+	if (argv.v_size < membsz)
 		return -EINVAL;
 
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index bb78745a0e3..3d3ddb3f517 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -430,6 +430,7 @@ nilfs_mdt_write_page(struct page *page, struct writeback_control *wbc)
 
 static struct address_space_operations def_mdt_aops = {
 	.writepage		= nilfs_mdt_write_page,
+	.sync_page		= block_sync_page,
 };
 
 static struct inode_operations def_mdt_iops;
@@ -449,7 +450,7 @@ struct inode *
 nilfs_mdt_new_common(struct the_nilfs *nilfs, struct super_block *sb,
 		     ino_t ino, gfp_t gfp_mask)
 {
-	struct inode *inode = nilfs_alloc_inode(sb);
+	struct inode *inode = nilfs_alloc_inode_common(nilfs);
 
 	if (!inode)
 		return NULL;
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index da6fc0bba2e..edf6a59d9f2 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -263,6 +263,7 @@ extern void nilfs_dirty_inode(struct inode *);
 extern struct dentry *nilfs_get_parent(struct dentry *);
 
 /* super.c */
+extern struct inode *nilfs_alloc_inode_common(struct the_nilfs *);
 extern struct inode *nilfs_alloc_inode(struct super_block *);
 extern void nilfs_destroy_inode(struct inode *);
 extern void nilfs_error(struct super_block *, const char *, const char *, ...)
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 57afa9d2406..d80cc71be74 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -28,7 +28,6 @@
 #include "segment.h"
 #include "sufile.h"
 #include "page.h"
-#include "seglist.h"
 #include "segbuf.h"
 
 /*
@@ -395,6 +394,24 @@ static void dispose_recovery_list(struct list_head *head)
 	}
 }
 
+struct nilfs_segment_entry {
+	struct list_head	list;
+	__u64			segnum;
+};
+
+static int nilfs_segment_list_add(struct list_head *head, __u64 segnum)
+{
+	struct nilfs_segment_entry *ent = kmalloc(sizeof(*ent), GFP_NOFS);
+
+	if (unlikely(!ent))
+		return -ENOMEM;
+
+	ent->segnum = segnum;
+	INIT_LIST_HEAD(&ent->list);
+	list_add_tail(&ent->list, head);
+	return 0;
+}
+
 void nilfs_dispose_segment_list(struct list_head *head)
 {
 	while (!list_empty(head)) {
@@ -402,7 +419,7 @@ void nilfs_dispose_segment_list(struct list_head *head)
 			= list_entry(head->next,
 				     struct nilfs_segment_entry, list);
 		list_del(&ent->list);
-		nilfs_free_segment_entry(ent);
+		kfree(ent);
 	}
 }
 
@@ -431,12 +448,10 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	if (unlikely(err))
 		goto failed;
 
-	err = -ENOMEM;
 	for (i = 1; i < 4; i++) {
-		ent = nilfs_alloc_segment_entry(segnum[i]);
-		if (unlikely(!ent))
+		err = nilfs_segment_list_add(head, segnum[i]);
+		if (unlikely(err))
 			goto failed;
-		list_add_tail(&ent->list, head);
 	}
 
 	/*
@@ -450,7 +465,7 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 				goto failed;
 		}
 		list_del(&ent->list);
-		nilfs_free_segment_entry(ent);
+		kfree(ent);
 	}
 
 	/* Allocate new segments for recovery */
@@ -791,7 +806,6 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 	u64 seg_seq;
 	__u64 segnum, nextnum = 0;
 	__u64 cno;
-	struct nilfs_segment_entry *ent;
 	LIST_HEAD(segments);
 	int empty_seg = 0, scan_newer = 0;
 	int ret;
@@ -892,12 +906,9 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 		if (empty_seg++)
 			goto super_root_found; /* found a valid super root */
 
-		ent = nilfs_alloc_segment_entry(segnum);
-		if (unlikely(!ent)) {
-			ret = -ENOMEM;
+		ret = nilfs_segment_list_add(&segments, segnum);
+		if (unlikely(ret))
 			goto failed;
-		}
-		list_add_tail(&ent->list, &segments);
 
 		seg_seq++;
 		segnum = nextnum;
diff --git a/fs/nilfs2/sb.h b/fs/nilfs2/sb.h
index adccd4fc654..0776ccc2504 100644
--- a/fs/nilfs2/sb.h
+++ b/fs/nilfs2/sb.h
@@ -60,6 +60,7 @@ struct nilfs_sb_info {
 	struct super_block *s_super;	/* reverse pointer to super_block */
 	struct the_nilfs *s_nilfs;
 	struct list_head s_list;	/* list head for nilfs->ns_supers */
+	atomic_t s_count;		/* reference count */
 
 	/* Segment constructor */
 	struct list_head s_dirty_files;	/* dirty files list */
diff --git a/fs/nilfs2/segbuf.c b/fs/nilfs2/segbuf.c
index 1e68821b4a9..9e3fe17bb96 100644
--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -26,7 +26,6 @@
 #include <linux/crc32.h>
 #include "page.h"
 #include "segbuf.h"
-#include "seglist.h"
 
 
 static struct kmem_cache *nilfs_segbuf_cachep;
@@ -394,7 +393,7 @@ int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
 		 * Last BIO is always sent through the following
 		 * submission.
 		 */
-		rw |= (1 << BIO_RW_SYNCIO);
+		rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
 		res = nilfs_submit_seg_bio(wi, rw);
 		if (unlikely(res))
 			goto failed_bio;
diff --git a/fs/nilfs2/seglist.h b/fs/nilfs2/seglist.h
deleted file mode 100644
index d39df9144e9..00000000000
--- a/fs/nilfs2/seglist.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * seglist.h - expediential structure and routines to handle list of segments
- *             (would be removed in a future release)
- *
- * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Written by Ryusuke Konishi <ryusuke@osrg.net>
- *
- */
-#ifndef _NILFS_SEGLIST_H
-#define _NILFS_SEGLIST_H
-
-#include <linux/fs.h>
-#include <linux/buffer_head.h>
-#include <linux/nilfs2_fs.h>
-#include "sufile.h"
-
-struct nilfs_segment_entry {
-	__u64			segnum;
-
-#define NILFS_SLH_FREED		0x0001	/* The segment was freed provisonally.
-					   It must be cancelled if
-					   construction aborted */
-
-	unsigned		flags;
-	struct list_head	list;
-	struct buffer_head     *bh_su;
-	struct nilfs_segment_usage *raw_su;
-};
-
-
-void nilfs_dispose_segment_list(struct list_head *);
-
-static inline struct nilfs_segment_entry *
-nilfs_alloc_segment_entry(__u64 segnum)
-{
-	struct nilfs_segment_entry *ent = kmalloc(sizeof(*ent), GFP_NOFS);
-
-	if (likely(ent)) {
-		ent->segnum = segnum;
-		ent->flags = 0;
-		ent->bh_su = NULL;
-		ent->raw_su = NULL;
-		INIT_LIST_HEAD(&ent->list);
-	}
-	return ent;
-}
-
-static inline int nilfs_open_segment_entry(struct nilfs_segment_entry *ent,
-					   struct inode *sufile)
-{
-	return nilfs_sufile_get_segment_usage(sufile, ent->segnum,
-					      &ent->raw_su, &ent->bh_su);
-}
-
-static inline void nilfs_close_segment_entry(struct nilfs_segment_entry *ent,
-					     struct inode *sufile)
-{
-	if (!ent->bh_su)
-		return;
-	nilfs_sufile_put_segment_usage(sufile, ent->segnum, ent->bh_su);
-	ent->bh_su = NULL;
-	ent->raw_su = NULL;
-}
-
-static inline void nilfs_free_segment_entry(struct nilfs_segment_entry *ent)
-{
-	kfree(ent);
-}
-
-#endif /* _NILFS_SEGLIST_H */
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 22c7f65c240..aa977549919 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -39,7 +39,6 @@
 #include "sufile.h"
 #include "cpfile.h"
 #include "ifile.h"
-#include "seglist.h"
 #include "segbuf.h"
 
 
@@ -79,7 +78,8 @@ enum {
 /* State flags of collection */
 #define NILFS_CF_NODE		0x0001	/* Collecting node blocks */
 #define NILFS_CF_IFILE_STARTED	0x0002	/* IFILE stage has started */
-#define NILFS_CF_HISTORY_MASK	(NILFS_CF_IFILE_STARTED)
+#define NILFS_CF_SUFREED	0x0004	/* segment usages has been freed */
+#define NILFS_CF_HISTORY_MASK	(NILFS_CF_IFILE_STARTED | NILFS_CF_SUFREED)
 
 /* Operations depending on the construction mode and file type */
 struct nilfs_sc_operations {
@@ -810,7 +810,7 @@ static int nilfs_segctor_clean(struct nilfs_sc_info *sci)
 {
 	return list_empty(&sci->sc_dirty_files) &&
 		!test_bit(NILFS_SC_DIRTY, &sci->sc_flags) &&
-		list_empty(&sci->sc_cleaning_segments) &&
+		sci->sc_nfreesegs == 0 &&
 		(!nilfs_doing_gc() || list_empty(&sci->sc_gc_inodes));
 }
 
@@ -1005,44 +1005,6 @@ static void nilfs_drop_collected_inodes(struct list_head *head)
 	}
 }
 
-static void nilfs_segctor_cancel_free_segments(struct nilfs_sc_info *sci,
-					       struct inode *sufile)
-
-{
-	struct list_head *head = &sci->sc_cleaning_segments;
-	struct nilfs_segment_entry *ent;
-	int err;
-
-	list_for_each_entry(ent, head, list) {
-		if (!(ent->flags & NILFS_SLH_FREED))
-			break;
-		err = nilfs_sufile_cancel_free(sufile, ent->segnum);
-		WARN_ON(err); /* do not happen */
-		ent->flags &= ~NILFS_SLH_FREED;
-	}
-}
-
-static int nilfs_segctor_prepare_free_segments(struct nilfs_sc_info *sci,
-					       struct inode *sufile)
-{
-	struct list_head *head = &sci->sc_cleaning_segments;
-	struct nilfs_segment_entry *ent;
-	int err;
-
-	list_for_each_entry(ent, head, list) {
-		err = nilfs_sufile_free(sufile, ent->segnum);
-		if (unlikely(err))
-			return err;
-		ent->flags |= NILFS_SLH_FREED;
-	}
-	return 0;
-}
-
-static void nilfs_segctor_commit_free_segments(struct nilfs_sc_info *sci)
-{
-	nilfs_dispose_segment_list(&sci->sc_cleaning_segments);
-}
-
 static int nilfs_segctor_apply_buffers(struct nilfs_sc_info *sci,
 				       struct inode *inode,
 				       struct list_head *listp,
@@ -1161,6 +1123,7 @@ static int nilfs_segctor_collect_blocks(struct nilfs_sc_info *sci, int mode)
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 	struct list_head *head;
 	struct nilfs_inode_info *ii;
+	size_t ndone;
 	int err = 0;
 
 	switch (sci->sc_stage.scnt) {
@@ -1250,10 +1213,16 @@ static int nilfs_segctor_collect_blocks(struct nilfs_sc_info *sci, int mode)
 			break;
 		sci->sc_stage.scnt++;  /* Fall through */
 	case NILFS_ST_SUFILE:
-		err = nilfs_segctor_prepare_free_segments(sci,
-							  nilfs->ns_sufile);
-		if (unlikely(err))
+		err = nilfs_sufile_freev(nilfs->ns_sufile, sci->sc_freesegs,
+					 sci->sc_nfreesegs, &ndone);
+		if (unlikely(err)) {
+			nilfs_sufile_cancel_freev(nilfs->ns_sufile,
+						  sci->sc_freesegs, ndone,
+						  NULL);
 			break;
+		}
+		sci->sc_stage.flags |= NILFS_CF_SUFREED;
+
 		err = nilfs_segctor_scan_file(sci, nilfs->ns_sufile,
 					      &nilfs_sc_file_ops);
 		if (unlikely(err))
@@ -1486,7 +1455,15 @@ static void nilfs_segctor_end_construction(struct nilfs_sc_info *sci,
 {
 	if (unlikely(err)) {
 		nilfs_segctor_free_incomplete_segments(sci, nilfs);
-		nilfs_segctor_cancel_free_segments(sci, nilfs->ns_sufile);
+		if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
+			int ret;
+
+			ret = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
+							sci->sc_freesegs,
+							sci->sc_nfreesegs,
+							NULL);
+			WARN_ON(ret); /* do not happen */
+		}
 	}
 	nilfs_segctor_clear_segment_buffers(sci);
 }
@@ -1585,7 +1562,13 @@ static int nilfs_segctor_collect(struct nilfs_sc_info *sci,
 		if (mode != SC_LSEG_SR || sci->sc_stage.scnt < NILFS_ST_CPFILE)
 			break;
 
-		nilfs_segctor_cancel_free_segments(sci, nilfs->ns_sufile);
+		if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
+			err = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
+							sci->sc_freesegs,
+							sci->sc_nfreesegs,
+							NULL);
+			WARN_ON(err); /* do not happen */
+		}
 		nilfs_segctor_clear_segment_buffers(sci);
 
 		err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
@@ -2224,10 +2207,8 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode)
 		nilfs_segctor_complete_write(sci);
 
 		/* Commit segments */
-		if (has_sr) {
-			nilfs_segctor_commit_free_segments(sci);
+		if (has_sr)
 			nilfs_segctor_clear_metadata_dirty(sci);
-		}
 
 		nilfs_segctor_end_construction(sci, nilfs, 0);
 
@@ -2301,48 +2282,6 @@ void nilfs_flush_segment(struct super_block *sb, ino_t ino)
 					/* assign bit 0 to data files */
 }
 
-int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *sci,
-					   __u64 *segnum, size_t nsegs)
-{
-	struct nilfs_segment_entry *ent;
-	struct the_nilfs *nilfs = sci->sc_sbi->s_nilfs;
-	struct inode *sufile = nilfs->ns_sufile;
-	LIST_HEAD(list);
-	__u64 *pnum;
-	size_t i;
-	int err;
-
-	for (pnum = segnum, i = 0; i < nsegs; pnum++, i++) {
-		ent = nilfs_alloc_segment_entry(*pnum);
-		if (unlikely(!ent)) {
-			err = -ENOMEM;
-			goto failed;
-		}
-		list_add_tail(&ent->list, &list);
-
-		err = nilfs_open_segment_entry(ent, sufile);
-		if (unlikely(err))
-			goto failed;
-
-		if (unlikely(!nilfs_segment_usage_dirty(ent->raw_su)))
-			printk(KERN_WARNING "NILFS: unused segment is "
-			       "requested to be cleaned (segnum=%llu)\n",
-			       (unsigned long long)ent->segnum);
-		nilfs_close_segment_entry(ent, sufile);
-	}
-	list_splice(&list, sci->sc_cleaning_segments.prev);
-	return 0;
-
- failed:
-	nilfs_dispose_segment_list(&list);
-	return err;
-}
-
-void nilfs_segctor_clear_segments_to_be_freed(struct nilfs_sc_info *sci)
-{
-	nilfs_dispose_segment_list(&sci->sc_cleaning_segments);
-}
-
 struct nilfs_segctor_wait_request {
 	wait_queue_t	wq;
 	__u32		seq;
@@ -2607,10 +2546,13 @@ int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
 	err = nilfs_init_gcdat_inode(nilfs);
 	if (unlikely(err))
 		goto out_unlock;
+
 	err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
 	if (unlikely(err))
 		goto out_unlock;
 
+	sci->sc_freesegs = kbufs[4];
+	sci->sc_nfreesegs = argv[4].v_nmembs;
 	list_splice_init(&nilfs->ns_gc_inodes, sci->sc_gc_inodes.prev);
 
 	for (;;) {
@@ -2629,6 +2571,8 @@ int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
 	}
 
  out_unlock:
+	sci->sc_freesegs = NULL;
+	sci->sc_nfreesegs = 0;
 	nilfs_clear_gcdat_inode(nilfs);
 	nilfs_transaction_unlock(sbi);
 	return err;
@@ -2835,7 +2779,6 @@ static struct nilfs_sc_info *nilfs_segctor_new(struct nilfs_sb_info *sbi)
 	INIT_LIST_HEAD(&sci->sc_dirty_files);
 	INIT_LIST_HEAD(&sci->sc_segbufs);
 	INIT_LIST_HEAD(&sci->sc_gc_inodes);
-	INIT_LIST_HEAD(&sci->sc_cleaning_segments);
 	INIT_LIST_HEAD(&sci->sc_copied_buffers);
 
 	sci->sc_interval = HZ * NILFS_SC_DEFAULT_TIMEOUT;
@@ -2901,9 +2844,6 @@ static void nilfs_segctor_destroy(struct nilfs_sc_info *sci)
 		nilfs_dispose_list(sbi, &sci->sc_dirty_files, 1);
 	}
 
-	if (!list_empty(&sci->sc_cleaning_segments))
-		nilfs_dispose_segment_list(&sci->sc_cleaning_segments);
-
 	WARN_ON(!list_empty(&sci->sc_segbufs));
 
 	down_write(&sbi->s_nilfs->ns_segctor_sem);
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index 476bdd5df5b..0d2a475a741 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -90,8 +90,9 @@ struct nilfs_segsum_pointer {
  * @sc_nblk_inc: Block count of current generation
  * @sc_dirty_files: List of files to be written
  * @sc_gc_inodes: List of GC inodes having blocks to be written
- * @sc_cleaning_segments: List of segments to be freed through construction
  * @sc_copied_buffers: List of copied buffers (buffer heads) to freeze data
+ * @sc_freesegs: array of segment numbers to be freed
+ * @sc_nfreesegs: number of segments on @sc_freesegs
  * @sc_dsync_inode: inode whose data pages are written for a sync operation
  * @sc_dsync_start: start byte offset of data pages
  * @sc_dsync_end: end byte offset of data pages (inclusive)
@@ -131,9 +132,11 @@ struct nilfs_sc_info {
 
 	struct list_head	sc_dirty_files;
 	struct list_head	sc_gc_inodes;
-	struct list_head	sc_cleaning_segments;
 	struct list_head	sc_copied_buffers;
 
+	__u64		       *sc_freesegs;
+	size_t			sc_nfreesegs;
+
 	struct nilfs_inode_info *sc_dsync_inode;
 	loff_t			sc_dsync_start;
 	loff_t			sc_dsync_end;
@@ -225,10 +228,6 @@ extern void nilfs_flush_segment(struct super_block *, ino_t);
 extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
 				void **);
 
-extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
-						  __u64 *, size_t);
-extern void nilfs_segctor_clear_segments_to_be_freed(struct nilfs_sc_info *);
-
 extern int nilfs_attach_segment_constructor(struct nilfs_sb_info *);
 extern void nilfs_detach_segment_constructor(struct nilfs_sb_info *);
 
@@ -240,5 +239,6 @@ extern int nilfs_search_super_root(struct the_nilfs *, struct nilfs_sb_info *,
 extern int nilfs_recover_logical_segments(struct the_nilfs *,
 					  struct nilfs_sb_info *,
 					  struct nilfs_recovery_info *);
+extern void nilfs_dispose_segment_list(struct list_head *);
 
 #endif /* _NILFS_SEGMENT_H */
diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index 98e68677f04..37994d4a59c 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  * Written by Koji Sato <koji@osrg.net>.
+ * Rivised by Ryusuke Konishi <ryusuke@osrg.net>.
  */
 
 #include <linux/kernel.h>
@@ -108,6 +109,102 @@ static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
 	nilfs_mdt_mark_buffer_dirty(header_bh);
 }
 
+/**
+ * nilfs_sufile_updatev - modify multiple segment usages at a time
+ * @sufile: inode of segment usage file
+ * @segnumv: array of segment numbers
+ * @nsegs: size of @segnumv array
+ * @create: creation flag
+ * @ndone: place to store number of modified segments on @segnumv
+ * @dofunc: primitive operation for the update
+ *
+ * Description: nilfs_sufile_updatev() repeatedly calls @dofunc
+ * against the given array of segments.  The @dofunc is called with
+ * buffers of a header block and the sufile block in which the target
+ * segment usage entry is contained.  If @ndone is given, the number
+ * of successfully modified segments from the head is stored in the
+ * place @ndone points to.
+ *
+ * Return Value: On success, zero is returned.  On error, one of the
+ * following negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-ENOENT - Given segment usage is in hole block (may be returned if
+ *            @create is zero)
+ *
+ * %-EINVAL - Invalid segment usage number
+ */
+int nilfs_sufile_updatev(struct inode *sufile, __u64 *segnumv, size_t nsegs,
+			 int create, size_t *ndone,
+			 void (*dofunc)(struct inode *, __u64,
+					struct buffer_head *,
+					struct buffer_head *))
+{
+	struct buffer_head *header_bh, *bh;
+	unsigned long blkoff, prev_blkoff;
+	__u64 *seg;
+	size_t nerr = 0, n = 0;
+	int ret = 0;
+
+	if (unlikely(nsegs == 0))
+		goto out;
+
+	down_write(&NILFS_MDT(sufile)->mi_sem);
+	for (seg = segnumv; seg < segnumv + nsegs; seg++) {
+		if (unlikely(*seg >= nilfs_sufile_get_nsegments(sufile))) {
+			printk(KERN_WARNING
+			       "%s: invalid segment number: %llu\n", __func__,
+			       (unsigned long long)*seg);
+			nerr++;
+		}
+	}
+	if (nerr > 0) {
+		ret = -EINVAL;
+		goto out_sem;
+	}
+
+	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
+	if (ret < 0)
+		goto out_sem;
+
+	seg = segnumv;
+	blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
+	ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
+	if (ret < 0)
+		goto out_header;
+
+	for (;;) {
+		dofunc(sufile, *seg, header_bh, bh);
+
+		if (++seg >= segnumv + nsegs)
+			break;
+		prev_blkoff = blkoff;
+		blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
+		if (blkoff == prev_blkoff)
+			continue;
+
+		/* get different block */
+		brelse(bh);
+		ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
+		if (unlikely(ret < 0))
+			goto out_header;
+	}
+	brelse(bh);
+
+ out_header:
+	n = seg - segnumv;
+	brelse(header_bh);
+ out_sem:
+	up_write(&NILFS_MDT(sufile)->mi_sem);
+ out:
+	if (ndone)
+		*ndone = n;
+	return ret;
+}
+
 int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
 			void (*dofunc)(struct inode *, __u64,
 				       struct buffer_head *,
@@ -490,7 +587,8 @@ void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
  * nilfs_sufile_get_suinfo -
  * @sufile: inode of segment usage file
  * @segnum: segment number to start looking
- * @si: array of suinfo
+ * @buf: array of suinfo
+ * @sisz: byte size of suinfo
  * @nsi: size of suinfo array
  *
  * Description:
@@ -502,11 +600,12 @@ void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
  *
  * %-ENOMEM - Insufficient amount of memory available.
  */
-ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum,
-				struct nilfs_suinfo *si, size_t nsi)
+ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum, void *buf,
+				unsigned sisz, size_t nsi)
 {
 	struct buffer_head *su_bh;
 	struct nilfs_segment_usage *su;
+	struct nilfs_suinfo *si = buf;
 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
 	struct the_nilfs *nilfs = NILFS_MDT(sufile)->mi_nilfs;
 	void *kaddr;
@@ -531,20 +630,22 @@ ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum,
 			if (ret != -ENOENT)
 				goto out;
 			/* hole */
-			memset(&si[i], 0, sizeof(struct nilfs_suinfo) * n);
+			memset(si, 0, sisz * n);
+			si = (void *)si + sisz * n;
 			continue;
 		}
 
 		kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
 		su = nilfs_sufile_block_get_segment_usage(
 			sufile, segnum, su_bh, kaddr);
-		for (j = 0; j < n; j++, su = (void *)su + susz) {
-			si[i + j].sui_lastmod = le64_to_cpu(su->su_lastmod);
-			si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks);
-			si[i + j].sui_flags = le32_to_cpu(su->su_flags) &
+		for (j = 0; j < n;
+		     j++, su = (void *)su + susz, si = (void *)si + sisz) {
+			si->sui_lastmod = le64_to_cpu(su->su_lastmod);
+			si->sui_nblocks = le32_to_cpu(su->su_nblocks);
+			si->sui_flags = le32_to_cpu(su->su_flags) &
 				~(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
 			if (nilfs_segment_is_active(nilfs, segnum + j))
-				si[i + j].sui_flags |=
+				si->sui_flags |=
 					(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
 		}
 		kunmap_atomic(kaddr, KM_USER0);
diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h
index a2e2efd4ade..a2c4d76c336 100644
--- a/fs/nilfs2/sufile.h
+++ b/fs/nilfs2/sufile.h
@@ -43,43 +43,27 @@ void nilfs_sufile_put_segment_usage(struct inode *, __u64,
 				    struct buffer_head *);
 int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *);
 int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *);
-ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *,
+ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, void *, unsigned,
 				size_t);
 
+int nilfs_sufile_updatev(struct inode *, __u64 *, size_t, int, size_t *,
+			 void (*dofunc)(struct inode *, __u64,
+					struct buffer_head *,
+					struct buffer_head *));
 int nilfs_sufile_update(struct inode *, __u64, int,
 			void (*dofunc)(struct inode *, __u64,
 				       struct buffer_head *,
 				       struct buffer_head *));
-void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
-				 struct buffer_head *);
 void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *,
 			   struct buffer_head *);
 void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
 			  struct buffer_head *);
+void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
+				 struct buffer_head *);
 void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
 			       struct buffer_head *);
 
 /**
- * nilfs_sufile_cancel_free -
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description:
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
-{
-	return nilfs_sufile_update(sufile, segnum, 0,
-				   nilfs_sufile_do_cancel_free);
-}
-
-/**
  * nilfs_sufile_scrap - make a segment garbage
  * @sufile: inode of segment usage file
  * @segnum: segment number to be freed
@@ -100,6 +84,38 @@ static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
 }
 
 /**
+ * nilfs_sufile_freev - free segments
+ * @sufile: inode of segment usage file
+ * @segnumv: array of segment numbers
+ * @nsegs: size of @segnumv array
+ * @ndone: place to store the number of freed segments
+ */
+static inline int nilfs_sufile_freev(struct inode *sufile, __u64 *segnumv,
+				     size_t nsegs, size_t *ndone)
+{
+	return nilfs_sufile_updatev(sufile, segnumv, nsegs, 0, ndone,
+				    nilfs_sufile_do_free);
+}
+
+/**
+ * nilfs_sufile_cancel_freev - reallocate freeing segments
+ * @sufile: inode of segment usage file
+ * @segnumv: array of segment numbers
+ * @nsegs: size of @segnumv array
+ * @ndone: place to store the number of cancelled segments
+ *
+ * Return Value: On success, 0 is returned. On error, a negative error codes
+ * is returned.
+ */
+static inline int nilfs_sufile_cancel_freev(struct inode *sufile,
+					    __u64 *segnumv, size_t nsegs,
+					    size_t *ndone)
+{
+	return nilfs_sufile_updatev(sufile, segnumv, nsegs, 0, ndone,
+				    nilfs_sufile_do_cancel_free);
+}
+
+/**
  * nilfs_sufile_set_error - mark a segment as erroneous
  * @sufile: inode of segment usage file
  * @segnum: segment number
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 6989b03e97a..ab785f85aa5 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -65,9 +65,8 @@ MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem "
 		   "(NILFS)");
 MODULE_LICENSE("GPL");
 
+static void nilfs_write_super(struct super_block *sb);
 static int nilfs_remount(struct super_block *sb, int *flags, char *data);
-static int test_exclusive_mount(struct file_system_type *fs_type,
-				struct block_device *bdev, int flags);
 
 /**
  * nilfs_error() - report failure condition on a filesystem
@@ -134,7 +133,7 @@ void nilfs_warning(struct super_block *sb, const char *function,
 
 static struct kmem_cache *nilfs_inode_cachep;
 
-struct inode *nilfs_alloc_inode(struct super_block *sb)
+struct inode *nilfs_alloc_inode_common(struct the_nilfs *nilfs)
 {
 	struct nilfs_inode_info *ii;
 
@@ -144,10 +143,15 @@ struct inode *nilfs_alloc_inode(struct super_block *sb)
 	ii->i_bh = NULL;
 	ii->i_state = 0;
 	ii->vfs_inode.i_version = 1;
-	nilfs_btnode_cache_init(&ii->i_btnode_cache);
+	nilfs_btnode_cache_init(&ii->i_btnode_cache, nilfs->ns_bdi);
 	return &ii->vfs_inode;
 }
 
+struct inode *nilfs_alloc_inode(struct super_block *sb)
+{
+	return nilfs_alloc_inode_common(NILFS_SB(sb)->s_nilfs);
+}
+
 void nilfs_destroy_inode(struct inode *inode)
 {
 	kmem_cache_free(nilfs_inode_cachep, NILFS_I(inode));
@@ -315,6 +319,11 @@ static void nilfs_put_super(struct super_block *sb)
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		nilfs_write_super(sb);
+
 	nilfs_detach_segment_constructor(sbi);
 
 	if (!(sb->s_flags & MS_RDONLY)) {
@@ -323,12 +332,18 @@ static void nilfs_put_super(struct super_block *sb)
 		nilfs_commit_super(sbi, 1);
 		up_write(&nilfs->ns_sem);
 	}
+	down_write(&nilfs->ns_super_sem);
+	if (nilfs->ns_current == sbi)
+		nilfs->ns_current = NULL;
+	up_write(&nilfs->ns_super_sem);
 
 	nilfs_detach_checkpoint(sbi);
 	put_nilfs(sbi->s_nilfs);
 	sbi->s_super = NULL;
 	sb->s_fs_info = NULL;
-	kfree(sbi);
+	nilfs_put_sbinfo(sbi);
+
+	unlock_kernel();
 }
 
 /**
@@ -383,6 +398,8 @@ static int nilfs_sync_fs(struct super_block *sb, int wait)
 {
 	int err = 0;
 
+	nilfs_write_super(sb);
+
 	/* This function is called when super block should be written back */
 	if (wait)
 		err = nilfs_construct_segment(sb);
@@ -396,9 +413,9 @@ int nilfs_attach_checkpoint(struct nilfs_sb_info *sbi, __u64 cno)
 	struct buffer_head *bh_cp;
 	int err;
 
-	down_write(&nilfs->ns_sem);
+	down_write(&nilfs->ns_super_sem);
 	list_add(&sbi->s_list, &nilfs->ns_supers);
-	up_write(&nilfs->ns_sem);
+	up_write(&nilfs->ns_super_sem);
 
 	sbi->s_ifile = nilfs_mdt_new(
 		nilfs, sbi->s_super, NILFS_IFILE_INO, NILFS_IFILE_GFP);
@@ -436,9 +453,9 @@ int nilfs_attach_checkpoint(struct nilfs_sb_info *sbi, __u64 cno)
 	nilfs_mdt_destroy(sbi->s_ifile);
 	sbi->s_ifile = NULL;
 
-	down_write(&nilfs->ns_sem);
+	down_write(&nilfs->ns_super_sem);
 	list_del_init(&sbi->s_list);
-	up_write(&nilfs->ns_sem);
+	up_write(&nilfs->ns_super_sem);
 
 	return err;
 }
@@ -450,9 +467,9 @@ void nilfs_detach_checkpoint(struct nilfs_sb_info *sbi)
 	nilfs_mdt_clear(sbi->s_ifile);
 	nilfs_mdt_destroy(sbi->s_ifile);
 	sbi->s_ifile = NULL;
-	down_write(&nilfs->ns_sem);
+	down_write(&nilfs->ns_super_sem);
 	list_del_init(&sbi->s_list);
-	up_write(&nilfs->ns_sem);
+	up_write(&nilfs->ns_super_sem);
 }
 
 static int nilfs_mark_recovery_complete(struct nilfs_sb_info *sbi)
@@ -752,7 +769,7 @@ int nilfs_store_magic_and_option(struct super_block *sb,
  * @silent: silent mode flag
  * @nilfs: the_nilfs struct
  *
- * This function is called exclusively by bd_mount_mutex.
+ * This function is called exclusively by nilfs->ns_mount_mutex.
  * So, the recovery process is protected from other simultaneous mounts.
  */
 static int
@@ -773,6 +790,7 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
 	get_nilfs(nilfs);
 	sbi->s_nilfs = nilfs;
 	sbi->s_super = sb;
+	atomic_set(&sbi->s_count, 1);
 
 	err = init_nilfs(nilfs, sbi, (char *)data);
 	if (err)
@@ -870,6 +888,11 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
 		goto failed_root;
 	}
 
+	down_write(&nilfs->ns_super_sem);
+	if (!nilfs_test_opt(sbi, SNAPSHOT))
+		nilfs->ns_current = sbi;
+	up_write(&nilfs->ns_super_sem);
+
 	return 0;
 
  failed_root:
@@ -885,7 +908,7 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
  failed_sbi:
 	put_nilfs(nilfs);
 	sb->s_fs_info = NULL;
-	kfree(sbi);
+	nilfs_put_sbinfo(sbi);
 	return err;
 }
 
@@ -898,6 +921,9 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 	struct nilfs_mount_options old_opts;
 	int err;
 
+	lock_kernel();
+
+	down_write(&nilfs->ns_super_sem);
 	old_sb_flags = sb->s_flags;
 	old_opts.mount_opt = sbi->s_mount_opt;
 	old_opts.snapshot_cno = sbi->s_snapshot_cno;
@@ -945,14 +971,12 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 		 * store the current valid flag.  (It may have been changed
 		 * by fsck since we originally mounted the partition.)
 		 */
-		down(&sb->s_bdev->bd_mount_sem);
-		/* Check existing RW-mount */
-		if (test_exclusive_mount(sb->s_type, sb->s_bdev, 0)) {
+		if (nilfs->ns_current && nilfs->ns_current != sbi) {
 			printk(KERN_WARNING "NILFS (device %s): couldn't "
-			       "remount because a RW-mount exists.\n",
+			       "remount because an RW-mount exists.\n",
 			       sb->s_id);
 			err = -EBUSY;
-			goto rw_remount_failed;
+			goto restore_opts;
 		}
 		if (sbi->s_snapshot_cno != nilfs_last_cno(nilfs)) {
 			printk(KERN_WARNING "NILFS (device %s): couldn't "
@@ -960,7 +984,7 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 			       "the latest one.\n",
 			       sb->s_id);
 			err = -EINVAL;
-			goto rw_remount_failed;
+			goto restore_opts;
 		}
 		sb->s_flags &= ~MS_RDONLY;
 		nilfs_clear_opt(sbi, SNAPSHOT);
@@ -968,28 +992,31 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 
 		err = nilfs_attach_segment_constructor(sbi);
 		if (err)
-			goto rw_remount_failed;
+			goto restore_opts;
 
 		down_write(&nilfs->ns_sem);
 		nilfs_setup_super(sbi);
 		up_write(&nilfs->ns_sem);
 
-		up(&sb->s_bdev->bd_mount_sem);
+		nilfs->ns_current = sbi;
 	}
  out:
+	up_write(&nilfs->ns_super_sem);
+	unlock_kernel();
 	return 0;
 
- rw_remount_failed:
-	up(&sb->s_bdev->bd_mount_sem);
  restore_opts:
 	sb->s_flags = old_sb_flags;
 	sbi->s_mount_opt = old_opts.mount_opt;
 	sbi->s_snapshot_cno = old_opts.snapshot_cno;
+	up_write(&nilfs->ns_super_sem);
+	unlock_kernel();
 	return err;
 }
 
 struct nilfs_super_data {
 	struct block_device *bdev;
+	struct nilfs_sb_info *sbi;
 	__u64 cno;
 	int flags;
 };
@@ -1048,33 +1075,7 @@ static int nilfs_test_bdev_super(struct super_block *s, void *data)
 {
 	struct nilfs_super_data *sd = data;
 
-	return s->s_bdev == sd->bdev;
-}
-
-static int nilfs_test_bdev_super2(struct super_block *s, void *data)
-{
-	struct nilfs_super_data *sd = data;
-	int ret;
-
-	if (s->s_bdev != sd->bdev)
-		return 0;
-
-	if (!((s->s_flags | sd->flags) & MS_RDONLY))
-		return 1; /* Reuse an old R/W-mode super_block */
-
-	if (s->s_flags & sd->flags & MS_RDONLY) {
-		if (down_read_trylock(&s->s_umount)) {
-			ret = s->s_root &&
-				(sd->cno == NILFS_SB(s)->s_snapshot_cno);
-			up_read(&s->s_umount);
-			/*
-			 * This path is locked with sb_lock by sget().
-			 * So, drop_super() causes deadlock.
-			 */
-			return ret;
-		}
-	}
-	return 0;
+	return sd->sbi && s->s_fs_info == (void *)sd->sbi;
 }
 
 static int
@@ -1082,8 +1083,8 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 	     const char *dev_name, void *data, struct vfsmount *mnt)
 {
 	struct nilfs_super_data sd;
-	struct super_block *s, *s2;
-	struct the_nilfs *nilfs = NULL;
+	struct super_block *s;
+	struct the_nilfs *nilfs;
 	int err, need_to_close = 1;
 
 	sd.bdev = open_bdev_exclusive(dev_name, flags, fs_type);
@@ -1095,7 +1096,6 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 	 * much more information than normal filesystems to identify mount
 	 * instance.  For snapshot mounts, not only a mount type (ro-mount
 	 * or rw-mount) but also a checkpoint number is required.
-	 * The results are passed in sget() using nilfs_super_data.
 	 */
 	sd.cno = 0;
 	sd.flags = flags;
@@ -1104,64 +1104,59 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 		goto failed;
 	}
 
-	/*
-	 * once the super is inserted into the list by sget, s_umount
-	 * will protect the lockfs code from trying to start a snapshot
-	 * while we are mounting
-	 */
-	down(&sd.bdev->bd_mount_sem);
-	if (!sd.cno &&
-	    (err = test_exclusive_mount(fs_type, sd.bdev, flags ^ MS_RDONLY))) {
-		err = (err < 0) ? : -EBUSY;
-		goto failed_unlock;
+	nilfs = find_or_create_nilfs(sd.bdev);
+	if (!nilfs) {
+		err = -ENOMEM;
+		goto failed;
 	}
 
-	/*
-	 * Phase-1: search any existent instance and get the_nilfs
-	 */
-	s = sget(fs_type, nilfs_test_bdev_super, nilfs_set_bdev_super, &sd);
-	if (IS_ERR(s))
-		goto error_s;
-
-	if (!s->s_root) {
-		err = -ENOMEM;
-		nilfs = alloc_nilfs(sd.bdev);
-		if (!nilfs)
-			goto cancel_new;
-	} else {
-		struct nilfs_sb_info *sbi = NILFS_SB(s);
+	mutex_lock(&nilfs->ns_mount_mutex);
 
+	if (!sd.cno) {
 		/*
-		 * s_umount protects super_block from unmount process;
-		 * It covers pointers of nilfs_sb_info and the_nilfs.
+		 * Check if an exclusive mount exists or not.
+		 * Snapshot mounts coexist with a current mount
+		 * (i.e. rw-mount or ro-mount), whereas rw-mount and
+		 * ro-mount are mutually exclusive.
 		 */
-		nilfs = sbi->s_nilfs;
-		get_nilfs(nilfs);
-		up_write(&s->s_umount);
+		down_read(&nilfs->ns_super_sem);
+		if (nilfs->ns_current &&
+		    ((nilfs->ns_current->s_super->s_flags ^ flags)
+		     & MS_RDONLY)) {
+			up_read(&nilfs->ns_super_sem);
+			err = -EBUSY;
+			goto failed_unlock;
+		}
+		up_read(&nilfs->ns_super_sem);
+	}
 
-		/*
-		 * Phase-2: search specified snapshot or R/W mode super_block
-		 */
-		if (!sd.cno)
-			/* trying to get the latest checkpoint.  */
-			sd.cno = nilfs_last_cno(nilfs);
+	/*
+	 * Find existing nilfs_sb_info struct
+	 */
+	sd.sbi = nilfs_find_sbinfo(nilfs, !(flags & MS_RDONLY), sd.cno);
 
-		s2 = sget(fs_type, nilfs_test_bdev_super2,
-			  nilfs_set_bdev_super, &sd);
-		deactivate_super(s);
-		/*
-		 * Although deactivate_super() invokes close_bdev_exclusive() at
-		 * kill_block_super().  Here, s is an existent mount; we need
-		 * one more close_bdev_exclusive() call.
-		 */
-		s = s2;
-		if (IS_ERR(s))
-			goto error_s;
+	if (!sd.cno)
+		/* trying to get the latest checkpoint.  */
+		sd.cno = nilfs_last_cno(nilfs);
+
+	/*
+	 * Get super block instance holding the nilfs_sb_info struct.
+	 * A new instance is allocated if no existing mount is present or
+	 * existing instance has been unmounted.
+	 */
+	s = sget(fs_type, nilfs_test_bdev_super, nilfs_set_bdev_super, &sd);
+	if (sd.sbi)
+		nilfs_put_sbinfo(sd.sbi);
+
+	if (IS_ERR(s)) {
+		err = PTR_ERR(s);
+		goto failed_unlock;
 	}
 
 	if (!s->s_root) {
 		char b[BDEVNAME_SIZE];
 
+		/* New superblock instance created */
 		s->s_flags = flags;
 		strlcpy(s->s_id, bdevname(sd.bdev, b), sizeof(s->s_id));
 		sb_set_blocksize(s, block_size(sd.bdev));
@@ -1172,26 +1167,18 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 
 		s->s_flags |= MS_ACTIVE;
 		need_to_close = 0;
-	} else if (!(s->s_flags & MS_RDONLY)) {
-		err = -EBUSY;
 	}
 
-	up(&sd.bdev->bd_mount_sem);
+	mutex_unlock(&nilfs->ns_mount_mutex);
 	put_nilfs(nilfs);
 	if (need_to_close)
 		close_bdev_exclusive(sd.bdev, flags);
 	simple_set_mnt(mnt, s);
 	return 0;
 
- error_s:
-	up(&sd.bdev->bd_mount_sem);
-	if (nilfs)
-		put_nilfs(nilfs);
-	close_bdev_exclusive(sd.bdev, flags);
-	return PTR_ERR(s);
-
  failed_unlock:
-	up(&sd.bdev->bd_mount_sem);
+	mutex_unlock(&nilfs->ns_mount_mutex);
+	put_nilfs(nilfs);
  failed:
 	close_bdev_exclusive(sd.bdev, flags);
 
@@ -1199,70 +1186,18 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 
  cancel_new:
 	/* Abandoning the newly allocated superblock */
-	up(&sd.bdev->bd_mount_sem);
-	if (nilfs)
-		put_nilfs(nilfs);
+	mutex_unlock(&nilfs->ns_mount_mutex);
+	put_nilfs(nilfs);
 	up_write(&s->s_umount);
 	deactivate_super(s);
 	/*
 	 * deactivate_super() invokes close_bdev_exclusive().
 	 * We must finish all post-cleaning before this call;
-	 * put_nilfs() and unlocking bd_mount_sem need the block device.
+	 * put_nilfs() needs the block device.
 	 */
 	return err;
 }
 
-static int nilfs_test_bdev_super3(struct super_block *s, void *data)
-{
-	struct nilfs_super_data *sd = data;
-	int ret;
-
-	if (s->s_bdev != sd->bdev)
-		return 0;
-	if (down_read_trylock(&s->s_umount)) {
-		ret = (s->s_flags & MS_RDONLY) && s->s_root &&
-			nilfs_test_opt(NILFS_SB(s), SNAPSHOT);
-		up_read(&s->s_umount);
-		if (ret)
-			return 0; /* ignore snapshot mounts */
-	}
-	return !((sd->flags ^ s->s_flags) & MS_RDONLY);
-}
-
-static int __false_bdev_super(struct super_block *s, void *data)
-{
-#if 0 /* XXX: workaround for lock debug. This is not good idea */
-	up_write(&s->s_umount);
-#endif
-	return -EFAULT;
-}
-
-/**
- * test_exclusive_mount - check whether an exclusive RW/RO mount exists or not.
- * fs_type: filesystem type
- * bdev: block device
- * flag: 0 (check rw-mount) or MS_RDONLY (check ro-mount)
- * res: pointer to an integer to store result
- *
- * This function must be called within a section protected by bd_mount_mutex.
- */
-static int test_exclusive_mount(struct file_system_type *fs_type,
-				struct block_device *bdev, int flags)
-{
-	struct super_block *s;
-	struct nilfs_super_data sd = { .flags = flags, .bdev = bdev };
-
-	s = sget(fs_type, nilfs_test_bdev_super3, __false_bdev_super, &sd);
-	if (IS_ERR(s)) {
-		if (PTR_ERR(s) != -EFAULT)
-			return PTR_ERR(s);
-		return 0;  /* Not found */
-	}
-	up_write(&s->s_umount);
-	deactivate_super(s);
-	return 1;  /* Found */
-}
-
 struct file_system_type nilfs_fs_type = {
 	.owner    = THIS_MODULE,
 	.name     = "nilfs2",
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index a91f15b8673..8b888982571 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -32,9 +32,12 @@
 #include "cpfile.h"
 #include "sufile.h"
 #include "dat.h"
-#include "seglist.h"
 #include "segbuf.h"
 
+
+static LIST_HEAD(nilfs_objects);
+static DEFINE_SPINLOCK(nilfs_lock);
+
 void nilfs_set_last_segment(struct the_nilfs *nilfs,
 			    sector_t start_blocknr, u64 seq, __u64 cno)
 {
@@ -55,7 +58,7 @@ void nilfs_set_last_segment(struct the_nilfs *nilfs,
  * Return Value: On success, pointer to the_nilfs is returned.
  * On error, NULL is returned.
  */
-struct the_nilfs *alloc_nilfs(struct block_device *bdev)
+static struct the_nilfs *alloc_nilfs(struct block_device *bdev)
 {
 	struct the_nilfs *nilfs;
 
@@ -68,7 +71,10 @@ struct the_nilfs *alloc_nilfs(struct block_device *bdev)
 	atomic_set(&nilfs->ns_writer_refcount, -1);
 	atomic_set(&nilfs->ns_ndirtyblks, 0);
 	init_rwsem(&nilfs->ns_sem);
+	init_rwsem(&nilfs->ns_super_sem);
+	mutex_init(&nilfs->ns_mount_mutex);
 	mutex_init(&nilfs->ns_writer_mutex);
+	INIT_LIST_HEAD(&nilfs->ns_list);
 	INIT_LIST_HEAD(&nilfs->ns_supers);
 	spin_lock_init(&nilfs->ns_last_segment_lock);
 	nilfs->ns_gc_inodes_h = NULL;
@@ -78,6 +84,45 @@ struct the_nilfs *alloc_nilfs(struct block_device *bdev)
 }
 
 /**
+ * find_or_create_nilfs - find or create nilfs object
+ * @bdev: block device to which the_nilfs is related
+ *
+ * find_nilfs() looks up an existent nilfs object created on the
+ * device and gets the reference count of the object.  If no nilfs object
+ * is found on the device, a new nilfs object is allocated.
+ *
+ * Return Value: On success, pointer to the nilfs object is returned.
+ * On error, NULL is returned.
+ */
+struct the_nilfs *find_or_create_nilfs(struct block_device *bdev)
+{
+	struct the_nilfs *nilfs, *new = NULL;
+
+ retry:
+	spin_lock(&nilfs_lock);
+	list_for_each_entry(nilfs, &nilfs_objects, ns_list) {
+		if (nilfs->ns_bdev == bdev) {
+			get_nilfs(nilfs);
+			spin_unlock(&nilfs_lock);
+			if (new)
+				put_nilfs(new);
+			return nilfs; /* existing object */
+		}
+	}
+	if (new) {
+		list_add_tail(&new->ns_list, &nilfs_objects);
+		spin_unlock(&nilfs_lock);
+		return new; /* new object */
+	}
+	spin_unlock(&nilfs_lock);
+
+	new = alloc_nilfs(bdev);
+	if (new)
+		goto retry;
+	return NULL; /* insufficient memory */
+}
+
+/**
  * put_nilfs - release a reference to the_nilfs
  * @nilfs: the_nilfs structure to be released
  *
@@ -86,13 +131,20 @@ struct the_nilfs *alloc_nilfs(struct block_device *bdev)
  */
 void put_nilfs(struct the_nilfs *nilfs)
 {
-	if (!atomic_dec_and_test(&nilfs->ns_count))
+	spin_lock(&nilfs_lock);
+	if (!atomic_dec_and_test(&nilfs->ns_count)) {
+		spin_unlock(&nilfs_lock);
 		return;
+	}
+	list_del_init(&nilfs->ns_list);
+	spin_unlock(&nilfs_lock);
+
 	/*
-	 * Increment of ns_count never occur below because the caller
+	 * Increment of ns_count never occurs below because the caller
 	 * of get_nilfs() holds at least one reference to the_nilfs.
 	 * Thus its exclusion control is not required here.
 	 */
+
 	might_sleep();
 	if (nilfs_loaded(nilfs)) {
 		nilfs_mdt_clear(nilfs->ns_sufile);
@@ -613,13 +665,63 @@ int nilfs_near_disk_full(struct the_nilfs *nilfs)
 	return ret;
 }
 
+/**
+ * nilfs_find_sbinfo - find existing nilfs_sb_info structure
+ * @nilfs: nilfs object
+ * @rw_mount: mount type (non-zero value for read/write mount)
+ * @cno: checkpoint number (zero for read-only mount)
+ *
+ * nilfs_find_sbinfo() returns the nilfs_sb_info structure which
+ * @rw_mount and @cno (in case of snapshots) matched.  If no instance
+ * was found, NULL is returned.  Although the super block instance can
+ * be unmounted after this function returns, the nilfs_sb_info struct
+ * is kept on memory until nilfs_put_sbinfo() is called.
+ */
+struct nilfs_sb_info *nilfs_find_sbinfo(struct the_nilfs *nilfs,
+					int rw_mount, __u64 cno)
+{
+	struct nilfs_sb_info *sbi;
+
+	down_read(&nilfs->ns_super_sem);
+	/*
+	 * The SNAPSHOT flag and sb->s_flags are supposed to be
+	 * protected with nilfs->ns_super_sem.
+	 */
+	sbi = nilfs->ns_current;
+	if (rw_mount) {
+		if (sbi && !(sbi->s_super->s_flags & MS_RDONLY))
+			goto found; /* read/write mount */
+		else
+			goto out;
+	} else if (cno == 0) {
+		if (sbi && (sbi->s_super->s_flags & MS_RDONLY))
+			goto found; /* read-only mount */
+		else
+			goto out;
+	}
+
+	list_for_each_entry(sbi, &nilfs->ns_supers, s_list) {
+		if (nilfs_test_opt(sbi, SNAPSHOT) &&
+		    sbi->s_snapshot_cno == cno)
+			goto found; /* snapshot mount */
+	}
+ out:
+	up_read(&nilfs->ns_super_sem);
+	return NULL;
+
+ found:
+	atomic_inc(&sbi->s_count);
+	up_read(&nilfs->ns_super_sem);
+	return sbi;
+}
+
 int nilfs_checkpoint_is_mounted(struct the_nilfs *nilfs, __u64 cno,
 				int snapshot_mount)
 {
 	struct nilfs_sb_info *sbi;
 	int ret = 0;
 
-	down_read(&nilfs->ns_sem);
+	down_read(&nilfs->ns_super_sem);
 	if (cno == 0 || cno > nilfs->ns_cno)
 		goto out_unlock;
 
@@ -636,6 +738,6 @@ int nilfs_checkpoint_is_mounted(struct the_nilfs *nilfs, __u64 cno,
 		ret++;
 
  out_unlock:
-	up_read(&nilfs->ns_sem);
+	up_read(&nilfs->ns_super_sem);
 	return ret;
 }
diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h
index 30fe58778d0..e8adbffc626 100644
--- a/fs/nilfs2/the_nilfs.h
+++ b/fs/nilfs2/the_nilfs.h
@@ -43,12 +43,16 @@ enum {
  * struct the_nilfs - struct to supervise multiple nilfs mount points
  * @ns_flags: flags
  * @ns_count: reference count
+ * @ns_list: list head for nilfs_list
  * @ns_bdev: block device
  * @ns_bdi: backing dev info
  * @ns_writer: back pointer to writable nilfs_sb_info
  * @ns_sem: semaphore for shared states
+ * @ns_super_sem: semaphore for global operations across super block instances
+ * @ns_mount_mutex: mutex protecting mount process of nilfs
  * @ns_writer_mutex: mutex protecting ns_writer attach/detach
  * @ns_writer_refcount: number of referrers on ns_writer
+ * @ns_current: back pointer to current mount
  * @ns_sbh: buffer heads of on-disk super blocks
  * @ns_sbp: pointers to super block data
  * @ns_sbwtime: previous write time of super blocks
@@ -88,15 +92,24 @@ enum {
 struct the_nilfs {
 	unsigned long		ns_flags;
 	atomic_t		ns_count;
+	struct list_head	ns_list;
 
 	struct block_device    *ns_bdev;
 	struct backing_dev_info *ns_bdi;
 	struct nilfs_sb_info   *ns_writer;
 	struct rw_semaphore	ns_sem;
+	struct rw_semaphore	ns_super_sem;
+	struct mutex		ns_mount_mutex;
 	struct mutex		ns_writer_mutex;
 	atomic_t		ns_writer_refcount;
 
 	/*
+	 * components protected by ns_super_sem
+	 */
+	struct nilfs_sb_info   *ns_current;
+	struct list_head	ns_supers;
+
+	/*
 	 * used for
 	 * - loading the latest checkpoint exclusively.
 	 * - allocating a new full segment.
@@ -108,7 +121,6 @@ struct the_nilfs {
 	time_t			ns_sbwtime[2];
 	unsigned		ns_sbsize;
 	unsigned		ns_mount_state;
-	struct list_head	ns_supers;
 
 	/*
 	 * Following fields are dedicated to a writable FS-instance.
@@ -191,11 +203,12 @@ THE_NILFS_FNS(DISCONTINUED, discontinued)
 #define NILFS_ALTSB_FREQ	60  /* spare superblock */
 
 void nilfs_set_last_segment(struct the_nilfs *, sector_t, u64, __u64);
-struct the_nilfs *alloc_nilfs(struct block_device *);
+struct the_nilfs *find_or_create_nilfs(struct block_device *);
 void put_nilfs(struct the_nilfs *);
 int init_nilfs(struct the_nilfs *, struct nilfs_sb_info *, char *);
 int load_nilfs(struct the_nilfs *, struct nilfs_sb_info *);
 int nilfs_count_free_blocks(struct the_nilfs *, sector_t *);
+struct nilfs_sb_info *nilfs_find_sbinfo(struct the_nilfs *, int, __u64);
 int nilfs_checkpoint_is_mounted(struct the_nilfs *, __u64, int);
 int nilfs_near_disk_full(struct the_nilfs *);
 void nilfs_fall_back_super_block(struct the_nilfs *);
@@ -238,6 +251,12 @@ nilfs_detach_writer(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 	mutex_unlock(&nilfs->ns_writer_mutex);
 }
 
+static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi)
+{
+	if (!atomic_dec_and_test(&sbi->s_count))
+		kfree(sbi);
+}
+
 static inline void
 nilfs_get_segment_range(struct the_nilfs *nilfs, __u64 segnum,
 			sector_t *seg_start, sector_t *seg_end)
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 50914d7303c..31dac7e3b0f 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -1,2 +1,15 @@
+config FSNOTIFY
+	bool "Filesystem notification backend"
+	default y
+	---help---
+	   fsnotify is a backend for filesystem notification.  fsnotify does
+	   not provide any userspace interface but does provide the basis
+	   needed for other notification schemes such as dnotify, inotify,
+	   and fanotify.
+
+	   Say Y here to enable fsnotify suport.
+
+	   If unsure, say Y.
+
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
diff --git a/fs/notify/Makefile b/fs/notify/Makefile
index 5a95b6010ce..0922cc826c4 100644
--- a/fs/notify/Makefile
+++ b/fs/notify/Makefile
@@ -1,2 +1,4 @@
+obj-$(CONFIG_FSNOTIFY)		+= fsnotify.o notification.o group.o inode_mark.o
+
 obj-y			+= dnotify/
 obj-y			+= inotify/
diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig
index 26adf5dfa64..904ff8d5405 100644
--- a/fs/notify/dnotify/Kconfig
+++ b/fs/notify/dnotify/Kconfig
@@ -1,5 +1,6 @@
 config DNOTIFY
 	bool "Dnotify support"
+	depends on FSNOTIFY
 	default y
 	help
 	  Dnotify is a directory-based per-fd file change notification system
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index b0aa2cde80b..828a889be90 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -3,6 +3,9 @@
  *
  * Copyright (C) 2000,2001,2002 Stephen Rothwell
  *
+ * Copyright (C) 2009 Eric Paris <Red Hat Inc>
+ * dnotify was largly rewritten to use the new fsnotify infrastructure
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
@@ -21,24 +24,173 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/fdtable.h>
+#include <linux/fsnotify_backend.h>
 
 int dir_notify_enable __read_mostly = 1;
 
-static struct kmem_cache *dn_cache __read_mostly;
+static struct kmem_cache *dnotify_struct_cache __read_mostly;
+static struct kmem_cache *dnotify_mark_entry_cache __read_mostly;
+static struct fsnotify_group *dnotify_group __read_mostly;
+static DEFINE_MUTEX(dnotify_mark_mutex);
+
+/*
+ * dnotify will attach one of these to each inode (i_fsnotify_mark_entries) which
+ * is being watched by dnotify.  If multiple userspace applications are watching
+ * the same directory with dnotify their information is chained in dn
+ */
+struct dnotify_mark_entry {
+	struct fsnotify_mark_entry fsn_entry;
+	struct dnotify_struct *dn;
+};
 
-static void redo_inode_mask(struct inode *inode)
+/*
+ * When a process starts or stops watching an inode the set of events which
+ * dnotify cares about for that inode may change.  This function runs the
+ * list of everything receiving dnotify events about this directory and calculates
+ * the set of all those events.  After it updates what dnotify is interested in
+ * it calls the fsnotify function so it can update the set of all events relevant
+ * to this inode.
+ */
+static void dnotify_recalc_inode_mask(struct fsnotify_mark_entry *entry)
 {
-	unsigned long new_mask;
+	__u32 new_mask, old_mask;
 	struct dnotify_struct *dn;
+	struct dnotify_mark_entry *dnentry  = container_of(entry,
+							   struct dnotify_mark_entry,
+							   fsn_entry);
+
+	assert_spin_locked(&entry->lock);
 
+	old_mask = entry->mask;
 	new_mask = 0;
-	for (dn = inode->i_dnotify; dn != NULL; dn = dn->dn_next)
-		new_mask |= dn->dn_mask & ~DN_MULTISHOT;
-	inode->i_dnotify_mask = new_mask;
+	for (dn = dnentry->dn; dn != NULL; dn = dn->dn_next)
+		new_mask |= (dn->dn_mask & ~FS_DN_MULTISHOT);
+	entry->mask = new_mask;
+
+	if (old_mask == new_mask)
+		return;
+
+	if (entry->inode)
+		fsnotify_recalc_inode_mask(entry->inode);
+}
+
+/*
+ * Mains fsnotify call where events are delivered to dnotify.
+ * Find the dnotify mark on the relevant inode, run the list of dnotify structs
+ * on that mark and determine which of them has expressed interest in receiving
+ * events of this type.  When found send the correct process and signal and
+ * destroy the dnotify struct if it was not registered to receive multiple
+ * events.
+ */
+static int dnotify_handle_event(struct fsnotify_group *group,
+				struct fsnotify_event *event)
+{
+	struct fsnotify_mark_entry *entry = NULL;
+	struct dnotify_mark_entry *dnentry;
+	struct inode *to_tell;
+	struct dnotify_struct *dn;
+	struct dnotify_struct **prev;
+	struct fown_struct *fown;
+
+	to_tell = event->to_tell;
+
+	spin_lock(&to_tell->i_lock);
+	entry = fsnotify_find_mark_entry(group, to_tell);
+	spin_unlock(&to_tell->i_lock);
+
+	/* unlikely since we alreay passed dnotify_should_send_event() */
+	if (unlikely(!entry))
+		return 0;
+	dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+
+	spin_lock(&entry->lock);
+	prev = &dnentry->dn;
+	while ((dn = *prev) != NULL) {
+		if ((dn->dn_mask & event->mask) == 0) {
+			prev = &dn->dn_next;
+			continue;
+		}
+		fown = &dn->dn_filp->f_owner;
+		send_sigio(fown, dn->dn_fd, POLL_MSG);
+		if (dn->dn_mask & FS_DN_MULTISHOT)
+			prev = &dn->dn_next;
+		else {
+			*prev = dn->dn_next;
+			kmem_cache_free(dnotify_struct_cache, dn);
+			dnotify_recalc_inode_mask(entry);
+		}
+	}
+
+	spin_unlock(&entry->lock);
+	fsnotify_put_mark(entry);
+
+	return 0;
+}
+
+/*
+ * Given an inode and mask determine if dnotify would be interested in sending
+ * userspace notification for that pair.
+ */
+static bool dnotify_should_send_event(struct fsnotify_group *group,
+				      struct inode *inode, __u32 mask)
+{
+	struct fsnotify_mark_entry *entry;
+	bool send;
+
+	/* !dir_notify_enable should never get here, don't waste time checking
+	if (!dir_notify_enable)
+		return 0; */
+
+	/* not a dir, dnotify doesn't care */
+	if (!S_ISDIR(inode->i_mode))
+		return false;
+
+	spin_lock(&inode->i_lock);
+	entry = fsnotify_find_mark_entry(group, inode);
+	spin_unlock(&inode->i_lock);
+
+	/* no mark means no dnotify watch */
+	if (!entry)
+		return false;
+
+	mask = (mask & ~FS_EVENT_ON_CHILD);
+	send = (mask & entry->mask);
+
+	fsnotify_put_mark(entry); /* matches fsnotify_find_mark_entry */
+
+	return send;
+}
+
+static void dnotify_free_mark(struct fsnotify_mark_entry *entry)
+{
+	struct dnotify_mark_entry *dnentry = container_of(entry,
+							  struct dnotify_mark_entry,
+							  fsn_entry);
+
+	BUG_ON(dnentry->dn);
+
+	kmem_cache_free(dnotify_mark_entry_cache, dnentry);
 }
 
+static struct fsnotify_ops dnotify_fsnotify_ops = {
+	.handle_event = dnotify_handle_event,
+	.should_send_event = dnotify_should_send_event,
+	.free_group_priv = NULL,
+	.freeing_mark = NULL,
+	.free_event_priv = NULL,
+};
+
+/*
+ * Called every time a file is closed.  Looks first for a dnotify mark on the
+ * inode.  If one is found run all of the ->dn entries attached to that
+ * mark for one relevant to this process closing the file and remove that
+ * dnotify_struct.  If that was the last dnotify_struct also remove the
+ * fsnotify_mark_entry.
+ */
 void dnotify_flush(struct file *filp, fl_owner_t id)
 {
+	struct fsnotify_mark_entry *entry;
+	struct dnotify_mark_entry *dnentry;
 	struct dnotify_struct *dn;
 	struct dnotify_struct **prev;
 	struct inode *inode;
@@ -46,145 +198,243 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
 	inode = filp->f_path.dentry->d_inode;
 	if (!S_ISDIR(inode->i_mode))
 		return;
+
 	spin_lock(&inode->i_lock);
-	prev = &inode->i_dnotify;
+	entry = fsnotify_find_mark_entry(dnotify_group, inode);
+	spin_unlock(&inode->i_lock);
+	if (!entry)
+		return;
+	dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+
+	mutex_lock(&dnotify_mark_mutex);
+
+	spin_lock(&entry->lock);
+	prev = &dnentry->dn;
 	while ((dn = *prev) != NULL) {
 		if ((dn->dn_owner == id) && (dn->dn_filp == filp)) {
 			*prev = dn->dn_next;
-			redo_inode_mask(inode);
-			kmem_cache_free(dn_cache, dn);
+			kmem_cache_free(dnotify_struct_cache, dn);
+			dnotify_recalc_inode_mask(entry);
 			break;
 		}
 		prev = &dn->dn_next;
 	}
-	spin_unlock(&inode->i_lock);
+
+	spin_unlock(&entry->lock);
+
+	/* nothing else could have found us thanks to the dnotify_mark_mutex */
+	if (dnentry->dn == NULL)
+		fsnotify_destroy_mark_by_entry(entry);
+
+	fsnotify_recalc_group_mask(dnotify_group);
+
+	mutex_unlock(&dnotify_mark_mutex);
+
+	fsnotify_put_mark(entry);
+}
+
+/* this conversion is done only at watch creation */
+static __u32 convert_arg(unsigned long arg)
+{
+	__u32 new_mask = FS_EVENT_ON_CHILD;
+
+	if (arg & DN_MULTISHOT)
+		new_mask |= FS_DN_MULTISHOT;
+	if (arg & DN_DELETE)
+		new_mask |= (FS_DELETE | FS_MOVED_FROM);
+	if (arg & DN_MODIFY)
+		new_mask |= FS_MODIFY;
+	if (arg & DN_ACCESS)
+		new_mask |= FS_ACCESS;
+	if (arg & DN_ATTRIB)
+		new_mask |= FS_ATTRIB;
+	if (arg & DN_RENAME)
+		new_mask |= FS_DN_RENAME;
+	if (arg & DN_CREATE)
+		new_mask |= (FS_CREATE | FS_MOVED_TO);
+
+	return new_mask;
 }
 
+/*
+ * If multiple processes watch the same inode with dnotify there is only one
+ * dnotify mark in inode->i_fsnotify_mark_entries but we chain a dnotify_struct
+ * onto that mark.  This function either attaches the new dnotify_struct onto
+ * that list, or it |= the mask onto an existing dnofiy_struct.
+ */
+static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnentry,
+		     fl_owner_t id, int fd, struct file *filp, __u32 mask)
+{
+	struct dnotify_struct *odn;
+
+	odn = dnentry->dn;
+	while (odn != NULL) {
+		/* adding more events to existing dnofiy_struct? */
+		if ((odn->dn_owner == id) && (odn->dn_filp == filp)) {
+			odn->dn_fd = fd;
+			odn->dn_mask |= mask;
+			return -EEXIST;
+		}
+		odn = odn->dn_next;
+	}
+
+	dn->dn_mask = mask;
+	dn->dn_fd = fd;
+	dn->dn_filp = filp;
+	dn->dn_owner = id;
+	dn->dn_next = dnentry->dn;
+	dnentry->dn = dn;
+
+	return 0;
+}
+
+/*
+ * When a process calls fcntl to attach a dnotify watch to a directory it ends
+ * up here.  Allocate both a mark for fsnotify to add and a dnotify_struct to be
+ * attached to the fsnotify_mark.
+ */
 int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
 {
+	struct dnotify_mark_entry *new_dnentry, *dnentry;
+	struct fsnotify_mark_entry *new_entry, *entry;
 	struct dnotify_struct *dn;
-	struct dnotify_struct *odn;
-	struct dnotify_struct **prev;
 	struct inode *inode;
 	fl_owner_t id = current->files;
 	struct file *f;
-	int error = 0;
+	int destroy = 0, error = 0;
+	__u32 mask;
+
+	/* we use these to tell if we need to kfree */
+	new_entry = NULL;
+	dn = NULL;
+
+	if (!dir_notify_enable) {
+		error = -EINVAL;
+		goto out_err;
+	}
 
+	/* a 0 mask means we are explicitly removing the watch */
 	if ((arg & ~DN_MULTISHOT) == 0) {
 		dnotify_flush(filp, id);
-		return 0;
+		error = 0;
+		goto out_err;
 	}
-	if (!dir_notify_enable)
-		return -EINVAL;
+
+	/* dnotify only works on directories */
 	inode = filp->f_path.dentry->d_inode;
-	if (!S_ISDIR(inode->i_mode))
-		return -ENOTDIR;
-	dn = kmem_cache_alloc(dn_cache, GFP_KERNEL);
-	if (dn == NULL)
-		return -ENOMEM;
-	spin_lock(&inode->i_lock);
-	prev = &inode->i_dnotify;
-	while ((odn = *prev) != NULL) {
-		if ((odn->dn_owner == id) && (odn->dn_filp == filp)) {
-			odn->dn_fd = fd;
-			odn->dn_mask |= arg;
-			inode->i_dnotify_mask |= arg & ~DN_MULTISHOT;
-			goto out_free;
-		}
-		prev = &odn->dn_next;
+	if (!S_ISDIR(inode->i_mode)) {
+		error = -ENOTDIR;
+		goto out_err;
 	}
 
-	rcu_read_lock();
-	f = fcheck(fd);
-	rcu_read_unlock();
-	/* we'd lost the race with close(), sod off silently */
-	/* note that inode->i_lock prevents reordering problems
-	 * between accesses to descriptor table and ->i_dnotify */
-	if (f != filp)
-		goto out_free;
+	/* expect most fcntl to add new rather than augment old */
+	dn = kmem_cache_alloc(dnotify_struct_cache, GFP_KERNEL);
+	if (!dn) {
+		error = -ENOMEM;
+		goto out_err;
+	}
 
-	error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
-	if (error)
-		goto out_free;
+	/* new fsnotify mark, we expect most fcntl calls to add a new mark */
+	new_dnentry = kmem_cache_alloc(dnotify_mark_entry_cache, GFP_KERNEL);
+	if (!new_dnentry) {
+		error = -ENOMEM;
+		goto out_err;
+	}
 
-	dn->dn_mask = arg;
-	dn->dn_fd = fd;
-	dn->dn_filp = filp;
-	dn->dn_owner = id;
-	inode->i_dnotify_mask |= arg & ~DN_MULTISHOT;
-	dn->dn_next = inode->i_dnotify;
-	inode->i_dnotify = dn;
-	spin_unlock(&inode->i_lock);
-	return 0;
+	/* convert the userspace DN_* "arg" to the internal FS_* defines in fsnotify */
+	mask = convert_arg(arg);
 
-out_free:
-	spin_unlock(&inode->i_lock);
-	kmem_cache_free(dn_cache, dn);
-	return error;
-}
+	/* set up the new_entry and new_dnentry */
+	new_entry = &new_dnentry->fsn_entry;
+	fsnotify_init_mark(new_entry, dnotify_free_mark);
+	new_entry->mask = mask;
+	new_dnentry->dn = NULL;
 
-void __inode_dir_notify(struct inode *inode, unsigned long event)
-{
-	struct dnotify_struct *	dn;
-	struct dnotify_struct **prev;
-	struct fown_struct *	fown;
-	int			changed = 0;
+	/* this is needed to prevent the fcntl/close race described below */
+	mutex_lock(&dnotify_mark_mutex);
 
+	/* add the new_entry or find an old one. */
 	spin_lock(&inode->i_lock);
-	prev = &inode->i_dnotify;
-	while ((dn = *prev) != NULL) {
-		if ((dn->dn_mask & event) == 0) {
-			prev = &dn->dn_next;
-			continue;
-		}
-		fown = &dn->dn_filp->f_owner;
-		send_sigio(fown, dn->dn_fd, POLL_MSG);
-		if (dn->dn_mask & DN_MULTISHOT)
-			prev = &dn->dn_next;
-		else {
-			*prev = dn->dn_next;
-			changed = 1;
-			kmem_cache_free(dn_cache, dn);
-		}
-	}
-	if (changed)
-		redo_inode_mask(inode);
+	entry = fsnotify_find_mark_entry(dnotify_group, inode);
 	spin_unlock(&inode->i_lock);
-}
-
-EXPORT_SYMBOL(__inode_dir_notify);
+	if (entry) {
+		dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+		spin_lock(&entry->lock);
+	} else {
+		fsnotify_add_mark(new_entry, dnotify_group, inode);
+		spin_lock(&new_entry->lock);
+		entry = new_entry;
+		dnentry = new_dnentry;
+		/* we used new_entry, so don't free it */
+		new_entry = NULL;
+	}
 
-/*
- * This is hopelessly wrong, but unfixable without API changes.  At
- * least it doesn't oops the kernel...
- *
- * To safely access ->d_parent we need to keep d_move away from it.  Use the
- * dentry's d_lock for this.
- */
-void dnotify_parent(struct dentry *dentry, unsigned long event)
-{
-	struct dentry *parent;
+	rcu_read_lock();
+	f = fcheck(fd);
+	rcu_read_unlock();
 
-	if (!dir_notify_enable)
-		return;
+	/* if (f != filp) means that we lost a race and another task/thread
+	 * actually closed the fd we are still playing with before we grabbed
+	 * the dnotify_mark_mutex and entry->lock.  Since closing the fd is the
+	 * only time we clean up the mark entries we need to get our mark off
+	 * the list. */
+	if (f != filp) {
+		/* if we added ourselves, shoot ourselves, it's possible that
+		 * the flush actually did shoot this entry.  That's fine too
+		 * since multiple calls to destroy_mark is perfectly safe, if
+		 * we found a dnentry already attached to the inode, just sod
+		 * off silently as the flush at close time dealt with it.
+		 */
+		if (dnentry == new_dnentry)
+			destroy = 1;
+		goto out;
+	}
 
-	spin_lock(&dentry->d_lock);
-	parent = dentry->d_parent;
-	if (parent->d_inode->i_dnotify_mask & event) {
-		dget(parent);
-		spin_unlock(&dentry->d_lock);
-		__inode_dir_notify(parent->d_inode, event);
-		dput(parent);
-	} else {
-		spin_unlock(&dentry->d_lock);
+	error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
+	if (error) {
+		/* if we added, we must shoot */
+		if (dnentry == new_dnentry)
+			destroy = 1;
+		goto out;
 	}
+
+	error = attach_dn(dn, dnentry, id, fd, filp, mask);
+	/* !error means that we attached the dn to the dnentry, so don't free it */
+	if (!error)
+		dn = NULL;
+	/* -EEXIST means that we didn't add this new dn and used an old one.
+	 * that isn't an error (and the unused dn should be freed) */
+	else if (error == -EEXIST)
+		error = 0;
+
+	dnotify_recalc_inode_mask(entry);
+out:
+	spin_unlock(&entry->lock);
+
+	if (destroy)
+		fsnotify_destroy_mark_by_entry(entry);
+
+	fsnotify_recalc_group_mask(dnotify_group);
+
+	mutex_unlock(&dnotify_mark_mutex);
+	fsnotify_put_mark(entry);
+out_err:
+	if (new_entry)
+		fsnotify_put_mark(new_entry);
+	if (dn)
+		kmem_cache_free(dnotify_struct_cache, dn);
+	return error;
 }
-EXPORT_SYMBOL_GPL(dnotify_parent);
 
 static int __init dnotify_init(void)
 {
-	dn_cache = kmem_cache_create("dnotify_cache",
-		sizeof(struct dnotify_struct), 0, SLAB_PANIC, NULL);
+	dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
+	dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
+
+	dnotify_group = fsnotify_obtain_group(DNOTIFY_GROUP_NUM,
+					      0, &dnotify_fsnotify_ops);
+	if (IS_ERR(dnotify_group))
+		panic("unable to allocate fsnotify group for dnotify\n");
 	return 0;
 }
 
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
new file mode 100644
index 00000000000..ec2f7bd7681
--- /dev/null
+++ b/fs/notify/fsnotify.c
@@ -0,0 +1,186 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dcache.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/srcu.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+/*
+ * Clear all of the marks on an inode when it is being evicted from core
+ */
+void __fsnotify_inode_delete(struct inode *inode)
+{
+	fsnotify_clear_marks_by_inode(inode);
+}
+EXPORT_SYMBOL_GPL(__fsnotify_inode_delete);
+
+/*
+ * Given an inode, first check if we care what happens to our children.  Inotify
+ * and dnotify both tell their parents about events.  If we care about any event
+ * on a child we run all of our children and set a dentry flag saying that the
+ * parent cares.  Thus when an event happens on a child it can quickly tell if
+ * if there is a need to find a parent and send the event to the parent.
+ */
+void __fsnotify_update_child_dentry_flags(struct inode *inode)
+{
+	struct dentry *alias;
+	int watched;
+
+	if (!S_ISDIR(inode->i_mode))
+		return;
+
+	/* determine if the children should tell inode about their events */
+	watched = fsnotify_inode_watches_children(inode);
+
+	spin_lock(&dcache_lock);
+	/* run all of the dentries associated with this inode.  Since this is a
+	 * directory, there damn well better only be one item on this list */
+	list_for_each_entry(alias, &inode->i_dentry, d_alias) {
+		struct dentry *child;
+
+		/* run all of the children of the original inode and fix their
+		 * d_flags to indicate parental interest (their parent is the
+		 * original inode) */
+		list_for_each_entry(child, &alias->d_subdirs, d_u.d_child) {
+			if (!child->d_inode)
+				continue;
+
+			spin_lock(&child->d_lock);
+			if (watched)
+				child->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
+			else
+				child->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
+			spin_unlock(&child->d_lock);
+		}
+	}
+	spin_unlock(&dcache_lock);
+}
+
+/* Notify this dentry's parent about a child's events. */
+void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+{
+	struct dentry *parent;
+	struct inode *p_inode;
+	bool send = false;
+	bool should_update_children = false;
+
+	if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
+		return;
+
+	spin_lock(&dentry->d_lock);
+	parent = dentry->d_parent;
+	p_inode = parent->d_inode;
+
+	if (fsnotify_inode_watches_children(p_inode)) {
+		if (p_inode->i_fsnotify_mask & mask) {
+			dget(parent);
+			send = true;
+		}
+	} else {
+		/*
+		 * The parent doesn't care about events on it's children but
+		 * at least one child thought it did.  We need to run all the
+		 * children and update their d_flags to let them know p_inode
+		 * doesn't care about them any more.
+		 */
+		dget(parent);
+		should_update_children = true;
+	}
+
+	spin_unlock(&dentry->d_lock);
+
+	if (send) {
+		/* we are notifying a parent so come up with the new mask which
+		 * specifies these are events which came from a child. */
+		mask |= FS_EVENT_ON_CHILD;
+
+		fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
+			 dentry->d_name.name, 0);
+		dput(parent);
+	}
+
+	if (unlikely(should_update_children)) {
+		__fsnotify_update_child_dentry_flags(p_inode);
+		dput(parent);
+	}
+}
+EXPORT_SYMBOL_GPL(__fsnotify_parent);
+
+/*
+ * This is the main call to fsnotify.  The VFS calls into hook specific functions
+ * in linux/fsnotify.h.  Those functions then in turn call here.  Here will call
+ * out to all of the registered fsnotify_group.  Those groups can then use the
+ * notification event in whatever means they feel necessary.
+ */
+void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *file_name, u32 cookie)
+{
+	struct fsnotify_group *group;
+	struct fsnotify_event *event = NULL;
+	int idx;
+	/* global tests shouldn't care about events on child only the specific event */
+	__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
+
+	if (list_empty(&fsnotify_groups))
+		return;
+
+	if (!(test_mask & fsnotify_mask))
+		return;
+
+	if (!(test_mask & to_tell->i_fsnotify_mask))
+		return;
+	/*
+	 * SRCU!!  the groups list is very very much read only and the path is
+	 * very hot.  The VAST majority of events are not going to need to do
+	 * anything other than walk the list so it's crazy to pre-allocate.
+	 */
+	idx = srcu_read_lock(&fsnotify_grp_srcu);
+	list_for_each_entry_rcu(group, &fsnotify_groups, group_list) {
+		if (test_mask & group->mask) {
+			if (!group->ops->should_send_event(group, to_tell, mask))
+				continue;
+			if (!event) {
+				event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+				/* shit, we OOM'd and now we can't tell, maybe
+				 * someday someone else will want to do something
+				 * here */
+				if (!event)
+					break;
+			}
+			group->ops->handle_event(group, event);
+		}
+	}
+	srcu_read_unlock(&fsnotify_grp_srcu, idx);
+	/*
+	 * fsnotify_create_event() took a reference so the event can't be cleaned
+	 * up while we are still trying to add it to lists, drop that one.
+	 */
+	if (event)
+		fsnotify_put_event(event);
+}
+EXPORT_SYMBOL_GPL(fsnotify);
+
+static __init int fsnotify_init(void)
+{
+	return init_srcu_struct(&fsnotify_grp_srcu);
+}
+subsys_initcall(fsnotify_init);
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
new file mode 100644
index 00000000000..4dc240824b2
--- /dev/null
+++ b/fs/notify/fsnotify.h
@@ -0,0 +1,34 @@
+#ifndef __FS_NOTIFY_FSNOTIFY_H_
+#define __FS_NOTIFY_FSNOTIFY_H_
+
+#include <linux/list.h>
+#include <linux/fsnotify.h>
+#include <linux/srcu.h>
+#include <linux/types.h>
+
+/* protects reads of fsnotify_groups */
+extern struct srcu_struct fsnotify_grp_srcu;
+/* all groups which receive fsnotify events */
+extern struct list_head fsnotify_groups;
+/* all bitwise OR of all event types (FS_*) for all fsnotify_groups */
+extern __u32 fsnotify_mask;
+
+/* destroy all events sitting in this groups notification queue */
+extern void fsnotify_flush_notify(struct fsnotify_group *group);
+
+/* final kfree of a group */
+extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
+
+/* run the list of all marks associated with inode and flag them to be freed */
+extern void fsnotify_clear_marks_by_inode(struct inode *inode);
+/*
+ * update the dentry->d_flags of all of inode's children to indicate if inode cares
+ * about events that happen to its children.
+ */
+extern void __fsnotify_update_child_dentry_flags(struct inode *inode);
+
+/* allocate and destroy and event holder to attach events to notification/access queues */
+extern struct fsnotify_event_holder *fsnotify_alloc_event_holder(void);
+extern void fsnotify_destroy_event_holder(struct fsnotify_event_holder *holder);
+
+#endif	/* __FS_NOTIFY_FSNOTIFY_H_ */
diff --git a/fs/notify/group.c b/fs/notify/group.c
new file mode 100644
index 00000000000..0e1677144bc
--- /dev/null
+++ b/fs/notify/group.c
@@ -0,0 +1,254 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/srcu.h>
+#include <linux/rculist.h>
+#include <linux/wait.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+#include <asm/atomic.h>
+
+/* protects writes to fsnotify_groups and fsnotify_mask */
+static DEFINE_MUTEX(fsnotify_grp_mutex);
+/* protects reads while running the fsnotify_groups list */
+struct srcu_struct fsnotify_grp_srcu;
+/* all groups registered to receive filesystem notifications */
+LIST_HEAD(fsnotify_groups);
+/* bitwise OR of all events (FS_*) interesting to some group on this system */
+__u32 fsnotify_mask;
+
+/*
+ * When a new group registers or changes it's set of interesting events
+ * this function updates the fsnotify_mask to contain all interesting events
+ */
+void fsnotify_recalc_global_mask(void)
+{
+	struct fsnotify_group *group;
+	__u32 mask = 0;
+	int idx;
+
+	idx = srcu_read_lock(&fsnotify_grp_srcu);
+	list_for_each_entry_rcu(group, &fsnotify_groups, group_list)
+		mask |= group->mask;
+	srcu_read_unlock(&fsnotify_grp_srcu, idx);
+	fsnotify_mask = mask;
+}
+
+/*
+ * Update the group->mask by running all of the marks associated with this
+ * group and finding the bitwise | of all of the mark->mask.  If we change
+ * the group->mask we need to update the global mask of events interesting
+ * to the system.
+ */
+void fsnotify_recalc_group_mask(struct fsnotify_group *group)
+{
+	__u32 mask = 0;
+	__u32 old_mask = group->mask;
+	struct fsnotify_mark_entry *entry;
+
+	spin_lock(&group->mark_lock);
+	list_for_each_entry(entry, &group->mark_entries, g_list)
+		mask |= entry->mask;
+	spin_unlock(&group->mark_lock);
+
+	group->mask = mask;
+
+	if (old_mask != mask)
+		fsnotify_recalc_global_mask();
+}
+
+/*
+ * Take a reference to a group so things found under the fsnotify_grp_mutex
+ * can't get freed under us
+ */
+static void fsnotify_get_group(struct fsnotify_group *group)
+{
+	atomic_inc(&group->refcnt);
+}
+
+/*
+ * Final freeing of a group
+ */
+void fsnotify_final_destroy_group(struct fsnotify_group *group)
+{
+	/* clear the notification queue of all events */
+	fsnotify_flush_notify(group);
+
+	if (group->ops->free_group_priv)
+		group->ops->free_group_priv(group);
+
+	kfree(group);
+}
+
+/*
+ * Trying to get rid of a group.  We need to first get rid of any outstanding
+ * allocations and then free the group.  Remember that fsnotify_clear_marks_by_group
+ * could miss marks that are being freed by inode and those marks could still
+ * hold a reference to this group (via group->num_marks)  If we get into that
+ * situtation, the fsnotify_final_destroy_group will get called when that final
+ * mark is freed.
+ */
+static void fsnotify_destroy_group(struct fsnotify_group *group)
+{
+	/* clear all inode mark entries for this group */
+	fsnotify_clear_marks_by_group(group);
+
+	/* past the point of no return, matches the initial value of 1 */
+	if (atomic_dec_and_test(&group->num_marks))
+		fsnotify_final_destroy_group(group);
+}
+
+/*
+ * Remove this group from the global list of groups that will get events
+ * this can be done even if there are still references and things still using
+ * this group.  This just stops the group from getting new events.
+ */
+static void __fsnotify_evict_group(struct fsnotify_group *group)
+{
+	BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
+
+	if (group->on_group_list)
+		list_del_rcu(&group->group_list);
+	group->on_group_list = 0;
+}
+
+/*
+ * Called when a group is no longer interested in getting events.  This can be
+ * used if a group is misbehaving or if for some reason a group should no longer
+ * get any filesystem events.
+ */
+void fsnotify_evict_group(struct fsnotify_group *group)
+{
+	mutex_lock(&fsnotify_grp_mutex);
+	__fsnotify_evict_group(group);
+	mutex_unlock(&fsnotify_grp_mutex);
+}
+
+/*
+ * Drop a reference to a group.  Free it if it's through.
+ */
+void fsnotify_put_group(struct fsnotify_group *group)
+{
+	if (!atomic_dec_and_mutex_lock(&group->refcnt, &fsnotify_grp_mutex))
+		return;
+
+	/*
+	 * OK, now we know that there's no other users *and* we hold mutex,
+	 * so no new references will appear
+	 */
+	__fsnotify_evict_group(group);
+
+	/*
+	 * now it's off the list, so the only thing we might care about is
+	 * srcu access....
+	 */
+	mutex_unlock(&fsnotify_grp_mutex);
+	synchronize_srcu(&fsnotify_grp_srcu);
+
+	/* and now it is really dead. _Nothing_ could be seeing it */
+	fsnotify_recalc_global_mask();
+	fsnotify_destroy_group(group);
+}
+
+/*
+ * Simply run the fsnotify_groups list and find a group which matches
+ * the given parameters.  If a group is found we take a reference to that
+ * group.
+ */
+static struct fsnotify_group *fsnotify_find_group(unsigned int group_num, __u32 mask,
+						  const struct fsnotify_ops *ops)
+{
+	struct fsnotify_group *group_iter;
+	struct fsnotify_group *group = NULL;
+
+	BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
+
+	list_for_each_entry_rcu(group_iter, &fsnotify_groups, group_list) {
+		if (group_iter->group_num == group_num) {
+			if ((group_iter->mask == mask) &&
+			    (group_iter->ops == ops)) {
+				fsnotify_get_group(group_iter);
+				group = group_iter;
+			} else
+				group = ERR_PTR(-EEXIST);
+		}
+	}
+	return group;
+}
+
+/*
+ * Either finds an existing group which matches the group_num, mask, and ops or
+ * creates a new group and adds it to the global group list.  In either case we
+ * take a reference for the group returned.
+ */
+struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
+					     const struct fsnotify_ops *ops)
+{
+	struct fsnotify_group *group, *tgroup;
+
+	/* very low use, simpler locking if we just always alloc */
+	group = kmalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
+	if (!group)
+		return ERR_PTR(-ENOMEM);
+
+	atomic_set(&group->refcnt, 1);
+
+	group->on_group_list = 0;
+	group->group_num = group_num;
+	group->mask = mask;
+
+	mutex_init(&group->notification_mutex);
+	INIT_LIST_HEAD(&group->notification_list);
+	init_waitqueue_head(&group->notification_waitq);
+	group->q_len = 0;
+	group->max_events = UINT_MAX;
+
+	spin_lock_init(&group->mark_lock);
+	atomic_set(&group->num_marks, 0);
+	INIT_LIST_HEAD(&group->mark_entries);
+
+	group->ops = ops;
+
+	mutex_lock(&fsnotify_grp_mutex);
+	tgroup = fsnotify_find_group(group_num, mask, ops);
+	if (tgroup) {
+		/* group already exists */
+		mutex_unlock(&fsnotify_grp_mutex);
+		/* destroy the new one we made */
+		fsnotify_put_group(group);
+		return tgroup;
+	}
+
+	/* group not found, add a new one */
+	list_add_rcu(&group->group_list, &fsnotify_groups);
+	group->on_group_list = 1;
+	/* being on the fsnotify_groups list holds one num_marks */
+	atomic_inc(&group->num_marks);
+
+	mutex_unlock(&fsnotify_grp_mutex);
+
+	if (mask)
+		fsnotify_recalc_global_mask();
+
+	return group;
+}
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
new file mode 100644
index 00000000000..c8a07c65482
--- /dev/null
+++ b/fs/notify/inode_mark.c
@@ -0,0 +1,426 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * fsnotify inode mark locking/lifetime/and refcnting
+ *
+ * REFCNT:
+ * The mark->refcnt tells how many "things" in the kernel currently are
+ * referencing this object.  The object typically will live inside the kernel
+ * with a refcnt of 2, one for each list it is on (i_list, g_list).  Any task
+ * which can find this object holding the appropriete locks, can take a reference
+ * and the object itself is guarenteed to survive until the reference is dropped.
+ *
+ * LOCKING:
+ * There are 3 spinlocks involved with fsnotify inode marks and they MUST
+ * be taken in order as follows:
+ *
+ * entry->lock
+ * group->mark_lock
+ * inode->i_lock
+ *
+ * entry->lock protects 2 things, entry->group and entry->inode.  You must hold
+ * that lock to dereference either of these things (they could be NULL even with
+ * the lock)
+ *
+ * group->mark_lock protects the mark_entries list anchored inside a given group
+ * and each entry is hooked via the g_list.  It also sorta protects the
+ * free_g_list, which when used is anchored by a private list on the stack of the
+ * task which held the group->mark_lock.
+ *
+ * inode->i_lock protects the i_fsnotify_mark_entries list anchored inside a
+ * given inode and each entry is hooked via the i_list. (and sorta the
+ * free_i_list)
+ *
+ *
+ * LIFETIME:
+ * Inode marks survive between when they are added to an inode and when their
+ * refcnt==0.
+ *
+ * The inode mark can be cleared for a number of different reasons including:
+ * - The inode is unlinked for the last time.  (fsnotify_inode_remove)
+ * - The inode is being evicted from cache. (fsnotify_inode_delete)
+ * - The fs the inode is on is unmounted.  (fsnotify_inode_delete/fsnotify_unmount_inodes)
+ * - Something explicitly requests that it be removed.  (fsnotify_destroy_mark_by_entry)
+ * - The fsnotify_group associated with the mark is going away and all such marks
+ *   need to be cleaned up. (fsnotify_clear_marks_by_group)
+ *
+ * Worst case we are given an inode and need to clean up all the marks on that
+ * inode.  We take i_lock and walk the i_fsnotify_mark_entries safely.  For each
+ * mark on the list we take a reference (so the mark can't disappear under us).
+ * We remove that mark form the inode's list of marks and we add this mark to a
+ * private list anchored on the stack using i_free_list;  At this point we no
+ * longer fear anything finding the mark using the inode's list of marks.
+ *
+ * We can safely and locklessly run the private list on the stack of everything
+ * we just unattached from the original inode.  For each mark on the private list
+ * we grab the mark-> and can thus dereference mark->group and mark->inode.  If
+ * we see the group and inode are not NULL we take those locks.  Now holding all
+ * 3 locks we can completely remove the mark from other tasks finding it in the
+ * future.  Remember, 10 things might already be referencing this mark, but they
+ * better be holding a ref.  We drop our reference we took before we unhooked it
+ * from the inode.  When the ref hits 0 we can free the mark.
+ *
+ * Very similarly for freeing by group, except we use free_g_list.
+ *
+ * This has the very interesting property of being able to run concurrently with
+ * any (or all) other directions.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/writeback.h> /* for inode_lock */
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+void fsnotify_get_mark(struct fsnotify_mark_entry *entry)
+{
+	atomic_inc(&entry->refcnt);
+}
+
+void fsnotify_put_mark(struct fsnotify_mark_entry *entry)
+{
+	if (atomic_dec_and_test(&entry->refcnt))
+		entry->free_mark(entry);
+}
+
+/*
+ * Recalculate the mask of events relevant to a given inode locked.
+ */
+static void fsnotify_recalc_inode_mask_locked(struct inode *inode)
+{
+	struct fsnotify_mark_entry *entry;
+	struct hlist_node *pos;
+	__u32 new_mask = 0;
+
+	assert_spin_locked(&inode->i_lock);
+
+	hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list)
+		new_mask |= entry->mask;
+	inode->i_fsnotify_mask = new_mask;
+}
+
+/*
+ * Recalculate the inode->i_fsnotify_mask, or the mask of all FS_* event types
+ * any notifier is interested in hearing for this inode.
+ */
+void fsnotify_recalc_inode_mask(struct inode *inode)
+{
+	spin_lock(&inode->i_lock);
+	fsnotify_recalc_inode_mask_locked(inode);
+	spin_unlock(&inode->i_lock);
+
+	__fsnotify_update_child_dentry_flags(inode);
+}
+
+/*
+ * Any time a mark is getting freed we end up here.
+ * The caller had better be holding a reference to this mark so we don't actually
+ * do the final put under the entry->lock
+ */
+void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
+{
+	struct fsnotify_group *group;
+	struct inode *inode;
+
+	spin_lock(&entry->lock);
+
+	group = entry->group;
+	inode = entry->inode;
+
+	BUG_ON(group && !inode);
+	BUG_ON(!group && inode);
+
+	/* if !group something else already marked this to die */
+	if (!group) {
+		spin_unlock(&entry->lock);
+		return;
+	}
+
+	/* 1 from caller and 1 for being on i_list/g_list */
+	BUG_ON(atomic_read(&entry->refcnt) < 2);
+
+	spin_lock(&group->mark_lock);
+	spin_lock(&inode->i_lock);
+
+	hlist_del_init(&entry->i_list);
+	entry->inode = NULL;
+
+	list_del_init(&entry->g_list);
+	entry->group = NULL;
+
+	fsnotify_put_mark(entry); /* for i_list and g_list */
+
+	/*
+	 * this mark is now off the inode->i_fsnotify_mark_entries list and we
+	 * hold the inode->i_lock, so this is the perfect time to update the
+	 * inode->i_fsnotify_mask
+	 */
+	fsnotify_recalc_inode_mask_locked(inode);
+
+	spin_unlock(&inode->i_lock);
+	spin_unlock(&group->mark_lock);
+	spin_unlock(&entry->lock);
+
+	/*
+	 * Some groups like to know that marks are being freed.  This is a
+	 * callback to the group function to let it know that this entry
+	 * is being freed.
+	 */
+	if (group->ops->freeing_mark)
+		group->ops->freeing_mark(entry, group);
+
+	/*
+	 * __fsnotify_update_child_dentry_flags(inode);
+	 *
+	 * I really want to call that, but we can't, we have no idea if the inode
+	 * still exists the second we drop the entry->lock.
+	 *
+	 * The next time an event arrive to this inode from one of it's children
+	 * __fsnotify_parent will see that the inode doesn't care about it's
+	 * children and will update all of these flags then.  So really this
+	 * is just a lazy update (and could be a perf win...)
+	 */
+
+
+	iput(inode);
+
+	/*
+	 * it's possible that this group tried to destroy itself, but this
+	 * this mark was simultaneously being freed by inode.  If that's the
+	 * case, we finish freeing the group here.
+	 */
+	if (unlikely(atomic_dec_and_test(&group->num_marks)))
+		fsnotify_final_destroy_group(group);
+}
+
+/*
+ * Given a group, destroy all of the marks associated with that group.
+ */
+void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
+{
+	struct fsnotify_mark_entry *lentry, *entry;
+	LIST_HEAD(free_list);
+
+	spin_lock(&group->mark_lock);
+	list_for_each_entry_safe(entry, lentry, &group->mark_entries, g_list) {
+		list_add(&entry->free_g_list, &free_list);
+		list_del_init(&entry->g_list);
+		fsnotify_get_mark(entry);
+	}
+	spin_unlock(&group->mark_lock);
+
+	list_for_each_entry_safe(entry, lentry, &free_list, free_g_list) {
+		fsnotify_destroy_mark_by_entry(entry);
+		fsnotify_put_mark(entry);
+	}
+}
+
+/*
+ * Given an inode, destroy all of the marks associated with that inode.
+ */
+void fsnotify_clear_marks_by_inode(struct inode *inode)
+{
+	struct fsnotify_mark_entry *entry, *lentry;
+	struct hlist_node *pos, *n;
+	LIST_HEAD(free_list);
+
+	spin_lock(&inode->i_lock);
+	hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_mark_entries, i_list) {
+		list_add(&entry->free_i_list, &free_list);
+		hlist_del_init(&entry->i_list);
+		fsnotify_get_mark(entry);
+	}
+	spin_unlock(&inode->i_lock);
+
+	list_for_each_entry_safe(entry, lentry, &free_list, free_i_list) {
+		fsnotify_destroy_mark_by_entry(entry);
+		fsnotify_put_mark(entry);
+	}
+}
+
+/*
+ * given a group and inode, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
+ */
+struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group,
+						     struct inode *inode)
+{
+	struct fsnotify_mark_entry *entry;
+	struct hlist_node *pos;
+
+	assert_spin_locked(&inode->i_lock);
+
+	hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list) {
+		if (entry->group == group) {
+			fsnotify_get_mark(entry);
+			return entry;
+		}
+	}
+	return NULL;
+}
+
+/*
+ * Nothing fancy, just initialize lists and locks and counters.
+ */
+void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
+			void (*free_mark)(struct fsnotify_mark_entry *entry))
+
+{
+	spin_lock_init(&entry->lock);
+	atomic_set(&entry->refcnt, 1);
+	INIT_HLIST_NODE(&entry->i_list);
+	entry->group = NULL;
+	entry->mask = 0;
+	entry->inode = NULL;
+	entry->free_mark = free_mark;
+}
+
+/*
+ * Attach an initialized mark entry to a given group and inode.
+ * These marks may be used for the fsnotify backend to determine which
+ * event types should be delivered to which group and for which inodes.
+ */
+int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
+		      struct fsnotify_group *group, struct inode *inode)
+{
+	struct fsnotify_mark_entry *lentry;
+	int ret = 0;
+
+	inode = igrab(inode);
+	if (unlikely(!inode))
+		return -EINVAL;
+
+	/*
+	 * LOCKING ORDER!!!!
+	 * entry->lock
+	 * group->mark_lock
+	 * inode->i_lock
+	 */
+	spin_lock(&entry->lock);
+	spin_lock(&group->mark_lock);
+	spin_lock(&inode->i_lock);
+
+	entry->group = group;
+	entry->inode = inode;
+
+	lentry = fsnotify_find_mark_entry(group, inode);
+	if (!lentry) {
+		hlist_add_head(&entry->i_list, &inode->i_fsnotify_mark_entries);
+		list_add(&entry->g_list, &group->mark_entries);
+
+		fsnotify_get_mark(entry); /* for i_list and g_list */
+
+		atomic_inc(&group->num_marks);
+
+		fsnotify_recalc_inode_mask_locked(inode);
+	}
+
+	spin_unlock(&inode->i_lock);
+	spin_unlock(&group->mark_lock);
+	spin_unlock(&entry->lock);
+
+	if (lentry) {
+		ret = -EEXIST;
+		iput(inode);
+		fsnotify_put_mark(lentry);
+	} else {
+		__fsnotify_update_child_dentry_flags(inode);
+	}
+
+	return ret;
+}
+
+/**
+ * fsnotify_unmount_inodes - an sb is unmounting.  handle any watched inodes.
+ * @list: list of inodes being unmounted (sb->s_inodes)
+ *
+ * Called with inode_lock held, protecting the unmounting super block's list
+ * of inodes, and with iprune_mutex held, keeping shrink_icache_memory() at bay.
+ * We temporarily drop inode_lock, however, and CAN block.
+ */
+void fsnotify_unmount_inodes(struct list_head *list)
+{
+	struct inode *inode, *next_i, *need_iput = NULL;
+
+	list_for_each_entry_safe(inode, next_i, list, i_sb_list) {
+		struct inode *need_iput_tmp;
+
+		/*
+		 * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
+		 * I_WILL_FREE, or I_NEW which is fine because by that point
+		 * the inode cannot have any associated watches.
+		 */
+		if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
+			continue;
+
+		/*
+		 * If i_count is zero, the inode cannot have any watches and
+		 * doing an __iget/iput with MS_ACTIVE clear would actually
+		 * evict all inodes with zero i_count from icache which is
+		 * unnecessarily violent and may in fact be illegal to do.
+		 */
+		if (!atomic_read(&inode->i_count))
+			continue;
+
+		need_iput_tmp = need_iput;
+		need_iput = NULL;
+
+		/* In case fsnotify_inode_delete() drops a reference. */
+		if (inode != need_iput_tmp)
+			__iget(inode);
+		else
+			need_iput_tmp = NULL;
+
+		/* In case the dropping of a reference would nuke next_i. */
+		if ((&next_i->i_sb_list != list) &&
+		    atomic_read(&next_i->i_count) &&
+		    !(next_i->i_state & (I_CLEAR | I_FREEING | I_WILL_FREE))) {
+			__iget(next_i);
+			need_iput = next_i;
+		}
+
+		/*
+		 * We can safely drop inode_lock here because we hold
+		 * references on both inode and next_i.  Also no new inodes
+		 * will be added since the umount has begun.  Finally,
+		 * iprune_mutex keeps shrink_icache_memory() away.
+		 */
+		spin_unlock(&inode_lock);
+
+		if (need_iput_tmp)
+			iput(need_iput_tmp);
+
+		/* for each watch, send FS_UNMOUNT and then remove it */
+		fsnotify(inode, FS_UNMOUNT, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+
+		fsnotify_inode_delete(inode);
+
+		iput(inode);
+
+		spin_lock(&inode_lock);
+	}
+}
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 44679284102..5356884289a 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -1,26 +1,30 @@
 config INOTIFY
 	bool "Inotify file change notification support"
-	default y
+	default n
 	---help---
-	  Say Y here to enable inotify support.  Inotify is a file change
-	  notification system and a replacement for dnotify.  Inotify fixes
-	  numerous shortcomings in dnotify and introduces several new features
-	  including multiple file events, one-shot support, and unmount
-	  notification.
+	  Say Y here to enable legacy in kernel inotify support.  Inotify is a
+	  file change notification system.  It is a replacement for dnotify.
+	  This option only provides the legacy inotify in kernel API.  There
+	  are no in tree kernel users of this interface since it is deprecated.
+	  You only need this if you are loading an out of tree kernel module
+	  that uses inotify.
 
 	  For more information, see <file:Documentation/filesystems/inotify.txt>
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config INOTIFY_USER
 	bool "Inotify support for userspace"
-	depends on INOTIFY
+	depends on FSNOTIFY
 	default y
 	---help---
 	  Say Y here to enable inotify support for userspace, including the
 	  associated system calls.  Inotify allows monitoring of both files and
 	  directories via a single open fd.  Events are read from the file
 	  descriptor, which is also select()- and poll()-able.
+	  Inotify fixes numerous shortcomings in dnotify and introduces several
+	  new features including multiple file events, one-shot support, and
+	  unmount notification.
 
 	  For more information, see <file:Documentation/filesystems/inotify.txt>
 
diff --git a/fs/notify/inotify/Makefile b/fs/notify/inotify/Makefile
index e290f3bb9d8..94382817136 100644
--- a/fs/notify/inotify/Makefile
+++ b/fs/notify/inotify/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_INOTIFY)		+= inotify.o
-obj-$(CONFIG_INOTIFY_USER)	+= inotify_user.o
+obj-$(CONFIG_INOTIFY_USER)	+= inotify_fsnotify.o inotify_user.o
diff --git a/fs/notify/inotify/inotify.c b/fs/notify/inotify/inotify.c
index 220c13f0d73..40b1cf914cc 100644
--- a/fs/notify/inotify/inotify.c
+++ b/fs/notify/inotify/inotify.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/writeback.h>
 #include <linux/inotify.h>
+#include <linux/fsnotify_backend.h>
 
 static atomic_t inotify_cookie;
 
@@ -905,6 +906,25 @@ EXPORT_SYMBOL_GPL(inotify_rm_watch);
  */
 static int __init inotify_setup(void)
 {
+	BUILD_BUG_ON(IN_ACCESS != FS_ACCESS);
+	BUILD_BUG_ON(IN_MODIFY != FS_MODIFY);
+	BUILD_BUG_ON(IN_ATTRIB != FS_ATTRIB);
+	BUILD_BUG_ON(IN_CLOSE_WRITE != FS_CLOSE_WRITE);
+	BUILD_BUG_ON(IN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
+	BUILD_BUG_ON(IN_OPEN != FS_OPEN);
+	BUILD_BUG_ON(IN_MOVED_FROM != FS_MOVED_FROM);
+	BUILD_BUG_ON(IN_MOVED_TO != FS_MOVED_TO);
+	BUILD_BUG_ON(IN_CREATE != FS_CREATE);
+	BUILD_BUG_ON(IN_DELETE != FS_DELETE);
+	BUILD_BUG_ON(IN_DELETE_SELF != FS_DELETE_SELF);
+	BUILD_BUG_ON(IN_MOVE_SELF != FS_MOVE_SELF);
+	BUILD_BUG_ON(IN_Q_OVERFLOW != FS_Q_OVERFLOW);
+
+	BUILD_BUG_ON(IN_UNMOUNT != FS_UNMOUNT);
+	BUILD_BUG_ON(IN_ISDIR != FS_IN_ISDIR);
+	BUILD_BUG_ON(IN_IGNORED != FS_IN_IGNORED);
+	BUILD_BUG_ON(IN_ONESHOT != FS_IN_ONESHOT);
+
 	atomic_set(&inotify_cookie, 0);
 
 	return 0;
diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h
new file mode 100644
index 00000000000..ea2605a58b8
--- /dev/null
+++ b/fs/notify/inotify/inotify.h
@@ -0,0 +1,21 @@
+#include <linux/fsnotify_backend.h>
+#include <linux/inotify.h>
+#include <linux/slab.h> /* struct kmem_cache */
+
+extern struct kmem_cache *event_priv_cachep;
+
+struct inotify_event_private_data {
+	struct fsnotify_event_private_data fsnotify_event_priv_data;
+	int wd;
+};
+
+struct inotify_inode_mark_entry {
+	/* fsnotify_mark_entry MUST be the first thing */
+	struct fsnotify_mark_entry fsn_entry;
+	int wd;
+};
+
+extern void inotify_destroy_mark_entry(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+extern void inotify_free_event_priv(struct fsnotify_event_private_data *event_priv);
+
+extern const struct fsnotify_ops inotify_fsnotify_ops;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
new file mode 100644
index 00000000000..7ef75b83247
--- /dev/null
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -0,0 +1,138 @@
+/*
+ * fs/inotify_user.c - inotify support for userspace
+ *
+ * Authors:
+ *	John McCutchan	<ttb@tentacle.dhs.org>
+ *	Robert Love	<rml@novell.com>
+ *
+ * Copyright (C) 2005 John McCutchan
+ * Copyright 2006 Hewlett-Packard Development Company, L.P.
+ *
+ * Copyright (C) 2009 Eric Paris <Red Hat Inc>
+ * inotify was largely rewriten to make use of the fsnotify infrastructure
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/fs.h> /* struct inode */
+#include <linux/fsnotify_backend.h>
+#include <linux/inotify.h>
+#include <linux/path.h> /* struct path */
+#include <linux/slab.h> /* kmem_* */
+#include <linux/types.h>
+
+#include "inotify.h"
+
+static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+	struct fsnotify_mark_entry *entry;
+	struct inotify_inode_mark_entry *ientry;
+	struct inode *to_tell;
+	struct inotify_event_private_data *event_priv;
+	struct fsnotify_event_private_data *fsn_event_priv;
+	int wd, ret;
+
+	to_tell = event->to_tell;
+
+	spin_lock(&to_tell->i_lock);
+	entry = fsnotify_find_mark_entry(group, to_tell);
+	spin_unlock(&to_tell->i_lock);
+	/* race with watch removal?  We already passes should_send */
+	if (unlikely(!entry))
+		return 0;
+	ientry = container_of(entry, struct inotify_inode_mark_entry,
+			      fsn_entry);
+	wd = ientry->wd;
+
+	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+	if (unlikely(!event_priv))
+		return -ENOMEM;
+
+	fsn_event_priv = &event_priv->fsnotify_event_priv_data;
+
+	fsn_event_priv->group = group;
+	event_priv->wd = wd;
+
+	ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
+	/* EEXIST is not an error */
+	if (ret == -EEXIST)
+		ret = 0;
+
+	/* did event_priv get attached? */
+	if (list_empty(&fsn_event_priv->event_list))
+		inotify_free_event_priv(fsn_event_priv);
+
+	/*
+	 * If we hold the entry until after the event is on the queue
+	 * IN_IGNORED won't be able to pass this event in the queue
+	 */
+	fsnotify_put_mark(entry);
+
+	return ret;
+}
+
+static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+{
+	inotify_destroy_mark_entry(entry, group);
+}
+
+static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
+{
+	struct fsnotify_mark_entry *entry;
+	bool send;
+
+	spin_lock(&inode->i_lock);
+	entry = fsnotify_find_mark_entry(group, inode);
+	spin_unlock(&inode->i_lock);
+	if (!entry)
+		return false;
+
+	mask = (mask & ~FS_EVENT_ON_CHILD);
+	send = (entry->mask & mask);
+
+	/* find took a reference */
+	fsnotify_put_mark(entry);
+
+	return send;
+}
+
+static int idr_callback(int id, void *p, void *data)
+{
+	BUG();
+	return 0;
+}
+
+static void inotify_free_group_priv(struct fsnotify_group *group)
+{
+	/* ideally the idr is empty and we won't hit the BUG in teh callback */
+	idr_for_each(&group->inotify_data.idr, idr_callback, NULL);
+	idr_remove_all(&group->inotify_data.idr);
+	idr_destroy(&group->inotify_data.idr);
+}
+
+void inotify_free_event_priv(struct fsnotify_event_private_data *fsn_event_priv)
+{
+	struct inotify_event_private_data *event_priv;
+
+
+	event_priv = container_of(fsn_event_priv, struct inotify_event_private_data,
+				  fsnotify_event_priv_data);
+
+	kmem_cache_free(event_priv_cachep, event_priv);
+}
+
+const struct fsnotify_ops inotify_fsnotify_ops = {
+	.handle_event = inotify_handle_event,
+	.should_send_event = inotify_should_send_event,
+	.free_group_priv = inotify_free_group_priv,
+	.free_event_priv = inotify_free_event_priv,
+	.freeing_mark = inotify_freeing_mark,
+};
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 1634319e240..982a412ac5b 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -8,6 +8,9 @@
  * Copyright (C) 2005 John McCutchan
  * Copyright 2006 Hewlett-Packard Development Company, L.P.
  *
+ * Copyright (C) 2009 Eric Paris <Red Hat Inc>
+ * inotify was largely rewriten to make use of the fsnotify infrastructure
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
@@ -19,94 +22,48 @@
  * General Public License for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
 #include <linux/file.h>
-#include <linux/mount.h>
-#include <linux/namei.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/list.h>
+#include <linux/fs.h> /* struct inode */
+#include <linux/fsnotify_backend.h>
+#include <linux/idr.h>
+#include <linux/init.h> /* module_init */
 #include <linux/inotify.h>
+#include <linux/kernel.h> /* roundup() */
+#include <linux/magic.h> /* superblock magic number */
+#include <linux/mount.h> /* mntget */
+#include <linux/namei.h> /* LOOKUP_FOLLOW */
+#include <linux/path.h> /* struct path */
+#include <linux/sched.h> /* struct user */
+#include <linux/slab.h> /* struct kmem_cache */
 #include <linux/syscalls.h>
-#include <linux/magic.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
 
-#include <asm/ioctls.h>
+#include "inotify.h"
 
-static struct kmem_cache *watch_cachep __read_mostly;
-static struct kmem_cache *event_cachep __read_mostly;
+#include <asm/ioctls.h>
 
 static struct vfsmount *inotify_mnt __read_mostly;
 
+/* this just sits here and wastes global memory.  used to just pad userspace messages with zeros */
+static struct inotify_event nul_inotify_event;
+
 /* these are configurable via /proc/sys/fs/inotify/ */
 static int inotify_max_user_instances __read_mostly;
-static int inotify_max_user_watches __read_mostly;
 static int inotify_max_queued_events __read_mostly;
+int inotify_max_user_watches __read_mostly;
 
-/*
- * Lock ordering:
- *
- * inotify_dev->up_mutex (ensures we don't re-add the same watch)
- * 	inode->inotify_mutex (protects inode's watch list)
- * 		inotify_handle->mutex (protects inotify_handle's watch list)
- * 			inotify_dev->ev_mutex (protects device's event queue)
- */
+static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
+struct kmem_cache *event_priv_cachep __read_mostly;
+static struct fsnotify_event *inotify_ignored_event;
 
 /*
- * Lifetimes of the main data structures:
- *
- * inotify_device: Lifetime is managed by reference count, from
- * sys_inotify_init() until release.  Additional references can bump the count
- * via get_inotify_dev() and drop the count via put_inotify_dev().
- *
- * inotify_user_watch: Lifetime is from create_watch() to the receipt of an
- * IN_IGNORED event from inotify, or when using IN_ONESHOT, to receipt of the
- * first event, or to inotify_destroy().
+ * When inotify registers a new group it increments this and uses that
+ * value as an offset to set the fsnotify group "name" and priority.
  */
-
-/*
- * struct inotify_device - represents an inotify instance
- *
- * This structure is protected by the mutex 'mutex'.
- */
-struct inotify_device {
-	wait_queue_head_t 	wq;		/* wait queue for i/o */
-	struct mutex		ev_mutex;	/* protects event queue */
-	struct mutex		up_mutex;	/* synchronizes watch updates */
-	struct list_head 	events;		/* list of queued events */
-	struct user_struct	*user;		/* user who opened this dev */
-	struct inotify_handle	*ih;		/* inotify handle */
-	struct fasync_struct    *fa;            /* async notification */
-	atomic_t		count;		/* reference count */
-	unsigned int		queue_size;	/* size of the queue (bytes) */
-	unsigned int		event_count;	/* number of pending events */
-	unsigned int		max_events;	/* maximum number of events */
-};
-
-/*
- * struct inotify_kernel_event - An inotify event, originating from a watch and
- * queued for user-space.  A list of these is attached to each instance of the
- * device.  In read(), this list is walked and all events that can fit in the
- * buffer are returned.
- *
- * Protected by dev->ev_mutex of the device in which we are queued.
- */
-struct inotify_kernel_event {
-	struct inotify_event	event;	/* the user-space event */
-	struct list_head        list;	/* entry in inotify_device's list */
-	char			*name;	/* filename, if any */
-};
-
-/*
- * struct inotify_user_watch - our version of an inotify_watch, we add
- * a reference to the associated inotify_device.
- */
-struct inotify_user_watch {
-	struct inotify_device	*dev;	/* associated device */
-	struct inotify_watch	wdata;	/* inotify watch data */
-};
+static atomic_t inotify_grp_num;
 
 #ifdef CONFIG_SYSCTL
 
@@ -149,280 +106,36 @@ ctl_table inotify_table[] = {
 };
 #endif /* CONFIG_SYSCTL */
 
-static inline void get_inotify_dev(struct inotify_device *dev)
-{
-	atomic_inc(&dev->count);
-}
-
-static inline void put_inotify_dev(struct inotify_device *dev)
-{
-	if (atomic_dec_and_test(&dev->count)) {
-		atomic_dec(&dev->user->inotify_devs);
-		free_uid(dev->user);
-		kfree(dev);
-	}
-}
-
-/*
- * free_inotify_user_watch - cleans up the watch and its references
- */
-static void free_inotify_user_watch(struct inotify_watch *w)
-{
-	struct inotify_user_watch *watch;
-	struct inotify_device *dev;
-
-	watch = container_of(w, struct inotify_user_watch, wdata);
-	dev = watch->dev;
-
-	atomic_dec(&dev->user->inotify_watches);
-	put_inotify_dev(dev);
-	kmem_cache_free(watch_cachep, watch);
-}
-
-/*
- * kernel_event - create a new kernel event with the given parameters
- *
- * This function can sleep.
- */
-static struct inotify_kernel_event * kernel_event(s32 wd, u32 mask, u32 cookie,
-						  const char *name)
-{
-	struct inotify_kernel_event *kevent;
-
-	kevent = kmem_cache_alloc(event_cachep, GFP_NOFS);
-	if (unlikely(!kevent))
-		return NULL;
-
-	/* we hand this out to user-space, so zero it just in case */
-	memset(&kevent->event, 0, sizeof(struct inotify_event));
-
-	kevent->event.wd = wd;
-	kevent->event.mask = mask;
-	kevent->event.cookie = cookie;
-
-	INIT_LIST_HEAD(&kevent->list);
-
-	if (name) {
-		size_t len, rem, event_size = sizeof(struct inotify_event);
-
-		/*
-		 * We need to pad the filename so as to properly align an
-		 * array of inotify_event structures.  Because the structure is
-		 * small and the common case is a small filename, we just round
-		 * up to the next multiple of the structure's sizeof.  This is
-		 * simple and safe for all architectures.
-		 */
-		len = strlen(name) + 1;
-		rem = event_size - len;
-		if (len > event_size) {
-			rem = event_size - (len % event_size);
-			if (len % event_size == 0)
-				rem = 0;
-		}
-
-		kevent->name = kmalloc(len + rem, GFP_NOFS);
-		if (unlikely(!kevent->name)) {
-			kmem_cache_free(event_cachep, kevent);
-			return NULL;
-		}
-		memcpy(kevent->name, name, len);
-		if (rem)
-			memset(kevent->name + len, 0, rem);
-		kevent->event.len = len + rem;
-	} else {
-		kevent->event.len = 0;
-		kevent->name = NULL;
-	}
-
-	return kevent;
-}
-
-/*
- * inotify_dev_get_event - return the next event in the given dev's queue
- *
- * Caller must hold dev->ev_mutex.
- */
-static inline struct inotify_kernel_event *
-inotify_dev_get_event(struct inotify_device *dev)
-{
-	return list_entry(dev->events.next, struct inotify_kernel_event, list);
-}
-
-/*
- * inotify_dev_get_last_event - return the last event in the given dev's queue
- *
- * Caller must hold dev->ev_mutex.
- */
-static inline struct inotify_kernel_event *
-inotify_dev_get_last_event(struct inotify_device *dev)
+static inline __u32 inotify_arg_to_mask(u32 arg)
 {
-	if (list_empty(&dev->events))
-		return NULL;
-	return list_entry(dev->events.prev, struct inotify_kernel_event, list);
-}
+	__u32 mask;
 
-/*
- * inotify_dev_queue_event - event handler registered with core inotify, adds
- * a new event to the given device
- *
- * Can sleep (calls kernel_event()).
- */
-static void inotify_dev_queue_event(struct inotify_watch *w, u32 wd, u32 mask,
-				    u32 cookie, const char *name,
-				    struct inode *ignored)
-{
-	struct inotify_user_watch *watch;
-	struct inotify_device *dev;
-	struct inotify_kernel_event *kevent, *last;
+	/* everything should accept their own ignored and cares about children */
+	mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD);
 
-	watch = container_of(w, struct inotify_user_watch, wdata);
-	dev = watch->dev;
+	/* mask off the flags used to open the fd */
+	mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT));
 
-	mutex_lock(&dev->ev_mutex);
-
-	/* we can safely put the watch as we don't reference it while
-	 * generating the event
-	 */
-	if (mask & IN_IGNORED || w->mask & IN_ONESHOT)
-		put_inotify_watch(w); /* final put */
-
-	/* coalescing: drop this event if it is a dupe of the previous */
-	last = inotify_dev_get_last_event(dev);
-	if (last && last->event.mask == mask && last->event.wd == wd &&
-			last->event.cookie == cookie) {
-		const char *lastname = last->name;
-
-		if (!name && !lastname)
-			goto out;
-		if (name && lastname && !strcmp(lastname, name))
-			goto out;
-	}
-
-	/* the queue overflowed and we already sent the Q_OVERFLOW event */
-	if (unlikely(dev->event_count > dev->max_events))
-		goto out;
-
-	/* if the queue overflows, we need to notify user space */
-	if (unlikely(dev->event_count == dev->max_events))
-		kevent = kernel_event(-1, IN_Q_OVERFLOW, cookie, NULL);
-	else
-		kevent = kernel_event(wd, mask, cookie, name);
-
-	if (unlikely(!kevent))
-		goto out;
-
-	/* queue the event and wake up anyone waiting */
-	dev->event_count++;
-	dev->queue_size += sizeof(struct inotify_event) + kevent->event.len;
-	list_add_tail(&kevent->list, &dev->events);
-	wake_up_interruptible(&dev->wq);
-	kill_fasync(&dev->fa, SIGIO, POLL_IN);
-
-out:
-	mutex_unlock(&dev->ev_mutex);
-}
-
-/*
- * remove_kevent - cleans up the given kevent
- *
- * Caller must hold dev->ev_mutex.
- */
-static void remove_kevent(struct inotify_device *dev,
-			  struct inotify_kernel_event *kevent)
-{
-	list_del(&kevent->list);
-
-	dev->event_count--;
-	dev->queue_size -= sizeof(struct inotify_event) + kevent->event.len;
-}
-
-/*
- * free_kevent - frees the given kevent.
- */
-static void free_kevent(struct inotify_kernel_event *kevent)
-{
-	kfree(kevent->name);
-	kmem_cache_free(event_cachep, kevent);
-}
-
-/*
- * inotify_dev_event_dequeue - destroy an event on the given device
- *
- * Caller must hold dev->ev_mutex.
- */
-static void inotify_dev_event_dequeue(struct inotify_device *dev)
-{
-	if (!list_empty(&dev->events)) {
-		struct inotify_kernel_event *kevent;
-		kevent = inotify_dev_get_event(dev);
-		remove_kevent(dev, kevent);
-		free_kevent(kevent);
-	}
-}
-
-/*
- * find_inode - resolve a user-given path to a specific inode
- */
-static int find_inode(const char __user *dirname, struct path *path,
-		      unsigned flags)
-{
-	int error;
-
-	error = user_path_at(AT_FDCWD, dirname, flags, path);
-	if (error)
-		return error;
-	/* you can only watch an inode if you have read permissions on it */
-	error = inode_permission(path->dentry->d_inode, MAY_READ);
-	if (error)
-		path_put(path);
-	return error;
+	return mask;
 }
 
-/*
- * create_watch - creates a watch on the given device.
- *
- * Callers must hold dev->up_mutex.
- */
-static int create_watch(struct inotify_device *dev, struct inode *inode,
-			u32 mask)
+static inline u32 inotify_mask_to_arg(__u32 mask)
 {
-	struct inotify_user_watch *watch;
-	int ret;
-
-	if (atomic_read(&dev->user->inotify_watches) >=
-			inotify_max_user_watches)
-		return -ENOSPC;
-
-	watch = kmem_cache_alloc(watch_cachep, GFP_KERNEL);
-	if (unlikely(!watch))
-		return -ENOMEM;
-
-	/* save a reference to device and bump the count to make it official */
-	get_inotify_dev(dev);
-	watch->dev = dev;
-
-	atomic_inc(&dev->user->inotify_watches);
-
-	inotify_init_watch(&watch->wdata);
-	ret = inotify_add_watch(dev->ih, &watch->wdata, inode, mask);
-	if (ret < 0)
-		free_inotify_user_watch(&watch->wdata);
-
-	return ret;
+	return mask & (IN_ALL_EVENTS | IN_ISDIR | IN_UNMOUNT | IN_IGNORED |
+		       IN_Q_OVERFLOW);
 }
 
-/* Device Interface */
-
+/* intofiy userspace file descriptor functions */
 static unsigned int inotify_poll(struct file *file, poll_table *wait)
 {
-	struct inotify_device *dev = file->private_data;
+	struct fsnotify_group *group = file->private_data;
 	int ret = 0;
 
-	poll_wait(file, &dev->wq, wait);
-	mutex_lock(&dev->ev_mutex);
-	if (!list_empty(&dev->events))
+	poll_wait(file, &group->notification_waitq, wait);
+	mutex_lock(&group->notification_mutex);
+	if (!fsnotify_notify_queue_is_empty(group))
 		ret = POLLIN | POLLRDNORM;
-	mutex_unlock(&dev->ev_mutex);
+	mutex_unlock(&group->notification_mutex);
 
 	return ret;
 }
@@ -432,26 +145,29 @@ static unsigned int inotify_poll(struct file *file, poll_table *wait)
  * enough to fit in "count". Return an error pointer if
  * not large enough.
  *
- * Called with the device ev_mutex held.
+ * Called with the group->notification_mutex held.
  */
-static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
-						  size_t count)
+static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
+					    size_t count)
 {
 	size_t event_size = sizeof(struct inotify_event);
-	struct inotify_kernel_event *kevent;
+	struct fsnotify_event *event;
 
-	if (list_empty(&dev->events))
+	if (fsnotify_notify_queue_is_empty(group))
 		return NULL;
 
-	kevent = inotify_dev_get_event(dev);
-	if (kevent->name)
-		event_size += kevent->event.len;
+	event = fsnotify_peek_notify_event(group);
+
+	event_size += roundup(event->name_len, event_size);
 
 	if (event_size > count)
 		return ERR_PTR(-EINVAL);
 
-	remove_kevent(dev, kevent);
-	return kevent;
+	/* held the notification_mutex the whole time, so this is the
+	 * same event we peeked above */
+	fsnotify_remove_notify_event(group);
+
+	return event;
 }
 
 /*
@@ -460,51 +176,90 @@ static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
  * We already checked that the event size is smaller than the
  * buffer we had in "get_one_event()" above.
  */
-static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent,
+static ssize_t copy_event_to_user(struct fsnotify_group *group,
+				  struct fsnotify_event *event,
 				  char __user *buf)
 {
+	struct inotify_event inotify_event;
+	struct fsnotify_event_private_data *fsn_priv;
+	struct inotify_event_private_data *priv;
 	size_t event_size = sizeof(struct inotify_event);
+	size_t name_len;
+
+	/* we get the inotify watch descriptor from the event private data */
+	spin_lock(&event->lock);
+	fsn_priv = fsnotify_remove_priv_from_event(group, event);
+	spin_unlock(&event->lock);
+
+	if (!fsn_priv)
+		inotify_event.wd = -1;
+	else {
+		priv = container_of(fsn_priv, struct inotify_event_private_data,
+				    fsnotify_event_priv_data);
+		inotify_event.wd = priv->wd;
+		inotify_free_event_priv(fsn_priv);
+	}
+
+	/* round up event->name_len so it is a multiple of event_size */
+	name_len = roundup(event->name_len, event_size);
+	inotify_event.len = name_len;
+
+	inotify_event.mask = inotify_mask_to_arg(event->mask);
+	inotify_event.cookie = event->sync_cookie;
 
-	if (copy_to_user(buf, &kevent->event, event_size))
+	/* send the main event */
+	if (copy_to_user(buf, &inotify_event, event_size))
 		return -EFAULT;
 
-	if (kevent->name) {
-		buf += event_size;
+	buf += event_size;
 
-		if (copy_to_user(buf, kevent->name, kevent->event.len))
+	/*
+	 * fsnotify only stores the pathname, so here we have to send the pathname
+	 * and then pad that pathname out to a multiple of sizeof(inotify_event)
+	 * with zeros.  I get my zeros from the nul_inotify_event.
+	 */
+	if (name_len) {
+		unsigned int len_to_zero = name_len - event->name_len;
+		/* copy the path name */
+		if (copy_to_user(buf, event->file_name, event->name_len))
 			return -EFAULT;
+		buf += event->name_len;
 
-		event_size += kevent->event.len;
+		/* fill userspace with 0's from nul_inotify_event */
+		if (copy_to_user(buf, &nul_inotify_event, len_to_zero))
+			return -EFAULT;
+		buf += len_to_zero;
+		event_size += name_len;
 	}
+
 	return event_size;
 }
 
 static ssize_t inotify_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *pos)
 {
-	struct inotify_device *dev;
+	struct fsnotify_group *group;
+	struct fsnotify_event *kevent;
 	char __user *start;
 	int ret;
 	DEFINE_WAIT(wait);
 
 	start = buf;
-	dev = file->private_data;
+	group = file->private_data;
 
 	while (1) {
-		struct inotify_kernel_event *kevent;
+		prepare_to_wait(&group->notification_waitq, &wait, TASK_INTERRUPTIBLE);
 
-		prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
-
-		mutex_lock(&dev->ev_mutex);
-		kevent = get_one_event(dev, count);
-		mutex_unlock(&dev->ev_mutex);
+		mutex_lock(&group->notification_mutex);
+		kevent = get_one_event(group, count);
+		mutex_unlock(&group->notification_mutex);
 
 		if (kevent) {
 			ret = PTR_ERR(kevent);
 			if (IS_ERR(kevent))
 				break;
-			ret = copy_event_to_user(kevent, buf);
-			free_kevent(kevent);
+			ret = copy_event_to_user(group, kevent, buf);
+			fsnotify_put_event(kevent);
 			if (ret < 0)
 				break;
 			buf += ret;
@@ -525,7 +280,7 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 		schedule();
 	}
 
-	finish_wait(&dev->wq, &wait);
+	finish_wait(&group->notification_waitq, &wait);
 	if (start != buf && ret != -EFAULT)
 		ret = buf - start;
 	return ret;
@@ -533,25 +288,19 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 
 static int inotify_fasync(int fd, struct file *file, int on)
 {
-	struct inotify_device *dev = file->private_data;
+	struct fsnotify_group *group = file->private_data;
 
-	return fasync_helper(fd, file, on, &dev->fa) >= 0 ? 0 : -EIO;
+	return fasync_helper(fd, file, on, &group->inotify_data.fa) >= 0 ? 0 : -EIO;
 }
 
 static int inotify_release(struct inode *ignored, struct file *file)
 {
-	struct inotify_device *dev = file->private_data;
-
-	inotify_destroy(dev->ih);
+	struct fsnotify_group *group = file->private_data;
 
-	/* destroy all of the events on this device */
-	mutex_lock(&dev->ev_mutex);
-	while (!list_empty(&dev->events))
-		inotify_dev_event_dequeue(dev);
-	mutex_unlock(&dev->ev_mutex);
+	fsnotify_clear_marks_by_group(group);
 
-	/* free this device: the put matching the get in inotify_init() */
-	put_inotify_dev(dev);
+	/* free this group, matching get was inotify_init->fsnotify_obtain_group */
+	fsnotify_put_group(group);
 
 	return 0;
 }
@@ -559,16 +308,27 @@ static int inotify_release(struct inode *ignored, struct file *file)
 static long inotify_ioctl(struct file *file, unsigned int cmd,
 			  unsigned long arg)
 {
-	struct inotify_device *dev;
+	struct fsnotify_group *group;
+	struct fsnotify_event_holder *holder;
+	struct fsnotify_event *event;
 	void __user *p;
 	int ret = -ENOTTY;
+	size_t send_len = 0;
 
-	dev = file->private_data;
+	group = file->private_data;
 	p = (void __user *) arg;
 
 	switch (cmd) {
 	case FIONREAD:
-		ret = put_user(dev->queue_size, (int __user *) p);
+		mutex_lock(&group->notification_mutex);
+		list_for_each_entry(holder, &group->notification_list, event_list) {
+			event = holder->event;
+			send_len += sizeof(struct inotify_event);
+			send_len += roundup(event->name_len,
+					     sizeof(struct inotify_event));
+		}
+		mutex_unlock(&group->notification_mutex);
+		ret = put_user(send_len, (int __user *) p);
 		break;
 	}
 
@@ -576,23 +336,233 @@ static long inotify_ioctl(struct file *file, unsigned int cmd,
 }
 
 static const struct file_operations inotify_fops = {
-	.poll           = inotify_poll,
-	.read           = inotify_read,
-	.fasync         = inotify_fasync,
-	.release        = inotify_release,
-	.unlocked_ioctl = inotify_ioctl,
+	.poll		= inotify_poll,
+	.read		= inotify_read,
+	.fasync		= inotify_fasync,
+	.release	= inotify_release,
+	.unlocked_ioctl	= inotify_ioctl,
 	.compat_ioctl	= inotify_ioctl,
 };
 
-static const struct inotify_operations inotify_user_ops = {
-	.handle_event	= inotify_dev_queue_event,
-	.destroy_watch	= free_inotify_user_watch,
-};
 
+/*
+ * find_inode - resolve a user-given path to a specific inode
+ */
+static int inotify_find_inode(const char __user *dirname, struct path *path, unsigned flags)
+{
+	int error;
+
+	error = user_path_at(AT_FDCWD, dirname, flags, path);
+	if (error)
+		return error;
+	/* you can only watch an inode if you have read permissions on it */
+	error = inode_permission(path->dentry->d_inode, MAY_READ);
+	if (error)
+		path_put(path);
+	return error;
+}
+
+/*
+ * When, for whatever reason, inotify is done with a mark (or what used to be a
+ * watch) we need to remove that watch from the idr and we need to send IN_IGNORED
+ * for the given wd.
+ *
+ * There is a bit of recursion here.  The loop looks like:
+ * 	inotify_destroy_mark_entry -> fsnotify_destroy_mark_by_entry ->
+ *	inotify_freeing_mark -> inotify_destory_mark_entry -> restart
+ * But the loop is broken in 2 places.  fsnotify_destroy_mark_by_entry sets
+ * entry->group = NULL before the call to inotify_freeing_mark, so the if (egroup)
+ * test below will not call back to fsnotify again.  But even if that test wasn't
+ * there this would still be safe since fsnotify_destroy_mark_by_entry() is
+ * safe from recursion.
+ */
+void inotify_destroy_mark_entry(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+{
+	struct inotify_inode_mark_entry *ientry;
+	struct inotify_event_private_data *event_priv;
+	struct fsnotify_event_private_data *fsn_event_priv;
+	struct fsnotify_group *egroup;
+	struct idr *idr;
+
+	spin_lock(&entry->lock);
+	egroup = entry->group;
+
+	/* if egroup we aren't really done and something might still send events
+	 * for this inode, on the callback we'll send the IN_IGNORED */
+	if (egroup) {
+		spin_unlock(&entry->lock);
+		fsnotify_destroy_mark_by_entry(entry);
+		return;
+	}
+	spin_unlock(&entry->lock);
+
+	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+
+	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+	if (unlikely(!event_priv))
+		goto skip_send_ignore;
+
+	fsn_event_priv = &event_priv->fsnotify_event_priv_data;
+
+	fsn_event_priv->group = group;
+	event_priv->wd = ientry->wd;
+
+	fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
+
+	/* did the private data get added? */
+	if (list_empty(&fsn_event_priv->event_list))
+		inotify_free_event_priv(fsn_event_priv);
+
+skip_send_ignore:
+
+	/* remove this entry from the idr */
+	spin_lock(&group->inotify_data.idr_lock);
+	idr = &group->inotify_data.idr;
+	idr_remove(idr, ientry->wd);
+	spin_unlock(&group->inotify_data.idr_lock);
+
+	/* removed from idr, drop that reference */
+	fsnotify_put_mark(entry);
+}
+
+/* ding dong the mark is dead */
+static void inotify_free_mark(struct fsnotify_mark_entry *entry)
+{
+	struct inotify_inode_mark_entry *ientry = (struct inotify_inode_mark_entry *)entry;
+
+	kmem_cache_free(inotify_inode_mark_cachep, ientry);
+}
+
+static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+{
+	struct fsnotify_mark_entry *entry = NULL;
+	struct inotify_inode_mark_entry *ientry;
+	int ret = 0;
+	int add = (arg & IN_MASK_ADD);
+	__u32 mask;
+	__u32 old_mask, new_mask;
+
+	/* don't allow invalid bits: we don't want flags set */
+	mask = inotify_arg_to_mask(arg);
+	if (unlikely(!mask))
+		return -EINVAL;
+
+	ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+	if (unlikely(!ientry))
+		return -ENOMEM;
+	/* we set the mask at the end after attaching it */
+	fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
+	ientry->wd = 0;
+
+find_entry:
+	spin_lock(&inode->i_lock);
+	entry = fsnotify_find_mark_entry(group, inode);
+	spin_unlock(&inode->i_lock);
+	if (entry) {
+		kmem_cache_free(inotify_inode_mark_cachep, ientry);
+		ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+	} else {
+		if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
+			ret = -ENOSPC;
+			goto out_err;
+		}
+
+		ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
+		if (ret == -EEXIST)
+			goto find_entry;
+		else if (ret)
+			goto out_err;
+
+		entry = &ientry->fsn_entry;
+retry:
+		ret = -ENOMEM;
+		if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
+			goto out_err;
+
+		spin_lock(&group->inotify_data.idr_lock);
+		/* if entry is added to the idr we keep the reference obtained
+		 * through fsnotify_mark_add.  remember to drop this reference
+		 * when entry is removed from idr */
+		ret = idr_get_new_above(&group->inotify_data.idr, entry,
+					++group->inotify_data.last_wd,
+					&ientry->wd);
+		spin_unlock(&group->inotify_data.idr_lock);
+		if (ret) {
+			if (ret == -EAGAIN)
+				goto retry;
+			goto out_err;
+		}
+		atomic_inc(&group->inotify_data.user->inotify_watches);
+	}
+
+	spin_lock(&entry->lock);
+
+	old_mask = entry->mask;
+	if (add) {
+		entry->mask |= mask;
+		new_mask = entry->mask;
+	} else {
+		entry->mask = mask;
+		new_mask = entry->mask;
+	}
+
+	spin_unlock(&entry->lock);
+
+	if (old_mask != new_mask) {
+		/* more bits in old than in new? */
+		int dropped = (old_mask & ~new_mask);
+		/* more bits in this entry than the inode's mask? */
+		int do_inode = (new_mask & ~inode->i_fsnotify_mask);
+		/* more bits in this entry than the group? */
+		int do_group = (new_mask & ~group->mask);
+
+		/* update the inode with this new entry */
+		if (dropped || do_inode)
+			fsnotify_recalc_inode_mask(inode);
+
+		/* update the group mask with the new mask */
+		if (dropped || do_group)
+			fsnotify_recalc_group_mask(group);
+	}
+
+	return ientry->wd;
+
+out_err:
+	/* see this isn't supposed to happen, just kill the watch */
+	if (entry) {
+		fsnotify_destroy_mark_by_entry(entry);
+		fsnotify_put_mark(entry);
+	}
+	return ret;
+}
+
+static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events)
+{
+	struct fsnotify_group *group;
+	unsigned int grp_num;
+
+	/* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
+	grp_num = (INOTIFY_GROUP_NUM - atomic_inc_return(&inotify_grp_num));
+	group = fsnotify_obtain_group(grp_num, 0, &inotify_fsnotify_ops);
+	if (IS_ERR(group))
+		return group;
+
+	group->max_events = max_events;
+
+	spin_lock_init(&group->inotify_data.idr_lock);
+	idr_init(&group->inotify_data.idr);
+	group->inotify_data.last_wd = 0;
+	group->inotify_data.user = user;
+	group->inotify_data.fa = NULL;
+
+	return group;
+}
+
+
+/* inotify syscalls */
 SYSCALL_DEFINE1(inotify_init1, int, flags)
 {
-	struct inotify_device *dev;
-	struct inotify_handle *ih;
+	struct fsnotify_group *group;
 	struct user_struct *user;
 	struct file *filp;
 	int fd, ret;
@@ -621,45 +591,27 @@ SYSCALL_DEFINE1(inotify_init1, int, flags)
 		goto out_free_uid;
 	}
 
-	dev = kmalloc(sizeof(struct inotify_device), GFP_KERNEL);
-	if (unlikely(!dev)) {
-		ret = -ENOMEM;
+	/* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
+	group = inotify_new_group(user, inotify_max_queued_events);
+	if (IS_ERR(group)) {
+		ret = PTR_ERR(group);
 		goto out_free_uid;
 	}
 
-	ih = inotify_init(&inotify_user_ops);
-	if (IS_ERR(ih)) {
-		ret = PTR_ERR(ih);
-		goto out_free_dev;
-	}
-	dev->ih = ih;
-	dev->fa = NULL;
-
 	filp->f_op = &inotify_fops;
 	filp->f_path.mnt = mntget(inotify_mnt);
 	filp->f_path.dentry = dget(inotify_mnt->mnt_root);
 	filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
 	filp->f_mode = FMODE_READ;
 	filp->f_flags = O_RDONLY | (flags & O_NONBLOCK);
-	filp->private_data = dev;
-
-	INIT_LIST_HEAD(&dev->events);
-	init_waitqueue_head(&dev->wq);
-	mutex_init(&dev->ev_mutex);
-	mutex_init(&dev->up_mutex);
-	dev->event_count = 0;
-	dev->queue_size = 0;
-	dev->max_events = inotify_max_queued_events;
-	dev->user = user;
-	atomic_set(&dev->count, 0);
-
-	get_inotify_dev(dev);
+	filp->private_data = group;
+
 	atomic_inc(&user->inotify_devs);
+
 	fd_install(fd, filp);
 
 	return fd;
-out_free_dev:
-	kfree(dev);
+
 out_free_uid:
 	free_uid(user);
 	put_filp(filp);
@@ -676,8 +628,8 @@ SYSCALL_DEFINE0(inotify_init)
 SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
 		u32, mask)
 {
+	struct fsnotify_group *group;
 	struct inode *inode;
-	struct inotify_device *dev;
 	struct path path;
 	struct file *filp;
 	int ret, fput_needed;
@@ -698,20 +650,20 @@ SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
 	if (mask & IN_ONLYDIR)
 		flags |= LOOKUP_DIRECTORY;
 
-	ret = find_inode(pathname, &path, flags);
-	if (unlikely(ret))
+	ret = inotify_find_inode(pathname, &path, flags);
+	if (ret)
 		goto fput_and_out;
 
-	/* inode held in place by reference to path; dev by fget on fd */
+	/* inode held in place by reference to path; group by fget on fd */
 	inode = path.dentry->d_inode;
-	dev = filp->private_data;
+	group = filp->private_data;
 
-	mutex_lock(&dev->up_mutex);
-	ret = inotify_find_update_watch(dev->ih, inode, mask);
-	if (ret == -ENOENT)
-		ret = create_watch(dev, inode, mask);
-	mutex_unlock(&dev->up_mutex);
+	/* create/update an inode mark */
+	ret = inotify_update_watch(group, inode, mask);
+	if (unlikely(ret))
+		goto path_put_and_out;
 
+path_put_and_out:
 	path_put(&path);
 fput_and_out:
 	fput_light(filp, fput_needed);
@@ -720,9 +672,10 @@ fput_and_out:
 
 SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 {
+	struct fsnotify_group *group;
+	struct fsnotify_mark_entry *entry;
 	struct file *filp;
-	struct inotify_device *dev;
-	int ret, fput_needed;
+	int ret = 0, fput_needed;
 
 	filp = fget_light(fd, &fput_needed);
 	if (unlikely(!filp))
@@ -734,10 +687,20 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 		goto out;
 	}
 
-	dev = filp->private_data;
+	group = filp->private_data;
 
-	/* we free our watch data when we get IN_IGNORED */
-	ret = inotify_rm_wd(dev->ih, wd);
+	spin_lock(&group->inotify_data.idr_lock);
+	entry = idr_find(&group->inotify_data.idr, wd);
+	if (unlikely(!entry)) {
+		spin_unlock(&group->inotify_data.idr_lock);
+		ret = -EINVAL;
+		goto out;
+	}
+	fsnotify_get_mark(entry);
+	spin_unlock(&group->inotify_data.idr_lock);
+
+	inotify_destroy_mark_entry(entry, group);
+	fsnotify_put_mark(entry);
 
 out:
 	fput_light(filp, fput_needed);
@@ -753,9 +716,9 @@ inotify_get_sb(struct file_system_type *fs_type, int flags,
 }
 
 static struct file_system_type inotify_fs_type = {
-    .name           = "inotifyfs",
-    .get_sb         = inotify_get_sb,
-    .kill_sb        = kill_anon_super,
+    .name	= "inotifyfs",
+    .get_sb	= inotify_get_sb,
+    .kill_sb	= kill_anon_super,
 };
 
 /*
@@ -775,18 +738,16 @@ static int __init inotify_user_setup(void)
 	if (IS_ERR(inotify_mnt))
 		panic("inotify: kern_mount ret %ld!\n", PTR_ERR(inotify_mnt));
 
+	inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
+	event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
+	inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
+	if (!inotify_ignored_event)
+		panic("unable to allocate the inotify ignored event\n");
+
 	inotify_max_queued_events = 16384;
 	inotify_max_user_instances = 128;
 	inotify_max_user_watches = 8192;
 
-	watch_cachep = kmem_cache_create("inotify_watch_cache",
-					 sizeof(struct inotify_user_watch),
-					 0, SLAB_PANIC, NULL);
-	event_cachep = kmem_cache_create("inotify_event_cache",
-					 sizeof(struct inotify_kernel_event),
-					 0, SLAB_PANIC, NULL);
-
 	return 0;
 }
-
 module_init(inotify_user_setup);
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
new file mode 100644
index 00000000000..959b73e756f
--- /dev/null
+++ b/fs/notify/notification.c
@@ -0,0 +1,411 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Basic idea behind the notification queue: An fsnotify group (like inotify)
+ * sends the userspace notification about events asyncronously some time after
+ * the event happened.  When inotify gets an event it will need to add that
+ * event to the group notify queue.  Since a single event might need to be on
+ * multiple group's notification queues we can't add the event directly to each
+ * queue and instead add a small "event_holder" to each queue.  This event_holder
+ * has a pointer back to the original event.  Since the majority of events are
+ * going to end up on one, and only one, notification queue we embed one
+ * event_holder into each event.  This means we have a single allocation instead
+ * of always needing two.  If the embedded event_holder is already in use by
+ * another group a new event_holder (from fsnotify_event_holder_cachep) will be
+ * allocated and used.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/mutex.h>
+#include <linux/namei.h>
+#include <linux/path.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+static struct kmem_cache *fsnotify_event_cachep;
+static struct kmem_cache *fsnotify_event_holder_cachep;
+/*
+ * This is a magic event we send when the q is too full.  Since it doesn't
+ * hold real event information we just keep one system wide and use it any time
+ * it is needed.  It's refcnt is set 1 at kernel init time and will never
+ * get set to 0 so it will never get 'freed'
+ */
+static struct fsnotify_event q_overflow_event;
+static atomic_t fsnotify_sync_cookie = ATOMIC_INIT(0);
+
+/**
+ * fsnotify_get_cookie - return a unique cookie for use in synchronizing events.
+ * Called from fsnotify_move, which is inlined into filesystem modules.
+ */
+u32 fsnotify_get_cookie(void)
+{
+	return atomic_inc_return(&fsnotify_sync_cookie);
+}
+EXPORT_SYMBOL_GPL(fsnotify_get_cookie);
+
+/* return true if the notify queue is empty, false otherwise */
+bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group)
+{
+	BUG_ON(!mutex_is_locked(&group->notification_mutex));
+	return list_empty(&group->notification_list) ? true : false;
+}
+
+void fsnotify_get_event(struct fsnotify_event *event)
+{
+	atomic_inc(&event->refcnt);
+}
+
+void fsnotify_put_event(struct fsnotify_event *event)
+{
+	if (!event)
+		return;
+
+	if (atomic_dec_and_test(&event->refcnt)) {
+		if (event->data_type == FSNOTIFY_EVENT_PATH)
+			path_put(&event->path);
+
+		BUG_ON(!list_empty(&event->private_data_list));
+
+		kfree(event->file_name);
+		kmem_cache_free(fsnotify_event_cachep, event);
+	}
+}
+
+struct fsnotify_event_holder *fsnotify_alloc_event_holder(void)
+{
+	return kmem_cache_alloc(fsnotify_event_holder_cachep, GFP_KERNEL);
+}
+
+void fsnotify_destroy_event_holder(struct fsnotify_event_holder *holder)
+{
+	kmem_cache_free(fsnotify_event_holder_cachep, holder);
+}
+
+/*
+ * Find the private data that the group previously attached to this event when
+ * the group added the event to the notification queue (fsnotify_add_notify_event)
+ */
+struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+	struct fsnotify_event_private_data *lpriv;
+	struct fsnotify_event_private_data *priv = NULL;
+
+	assert_spin_locked(&event->lock);
+
+	list_for_each_entry(lpriv, &event->private_data_list, event_list) {
+		if (lpriv->group == group) {
+			priv = lpriv;
+			list_del(&priv->event_list);
+			break;
+		}
+	}
+	return priv;
+}
+
+/*
+ * Check if 2 events contain the same information.  We do not compare private data
+ * but at this moment that isn't a problem for any know fsnotify listeners.
+ */
+static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new)
+{
+	if ((old->mask == new->mask) &&
+	    (old->to_tell == new->to_tell) &&
+	    (old->data_type == new->data_type)) {
+		switch (old->data_type) {
+		case (FSNOTIFY_EVENT_INODE):
+			if (old->inode == new->inode)
+				return true;
+			break;
+		case (FSNOTIFY_EVENT_PATH):
+			if ((old->path.mnt == new->path.mnt) &&
+			    (old->path.dentry == new->path.dentry))
+				return true;
+		case (FSNOTIFY_EVENT_NONE):
+			return true;
+		};
+	}
+	return false;
+}
+
+/*
+ * Add an event to the group notification queue.  The group can later pull this
+ * event off the queue to deal with.  If the event is successfully added to the
+ * group's notification queue, a reference is taken on event.
+ */
+int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
+			      struct fsnotify_event_private_data *priv)
+{
+	struct fsnotify_event_holder *holder = NULL;
+	struct list_head *list = &group->notification_list;
+	struct fsnotify_event_holder *last_holder;
+	struct fsnotify_event *last_event;
+
+	/* easy to tell if priv was attached to the event */
+	INIT_LIST_HEAD(&priv->event_list);
+
+	/*
+	 * There is one fsnotify_event_holder embedded inside each fsnotify_event.
+	 * Check if we expect to be able to use that holder.  If not alloc a new
+	 * holder.
+	 * For the overflow event it's possible that something will use the in
+	 * event holder before we get the lock so we may need to jump back and
+	 * alloc a new holder, this can't happen for most events...
+	 */
+	if (!list_empty(&event->holder.event_list)) {
+alloc_holder:
+		holder = fsnotify_alloc_event_holder();
+		if (!holder)
+			return -ENOMEM;
+	}
+
+	mutex_lock(&group->notification_mutex);
+
+	if (group->q_len >= group->max_events) {
+		event = &q_overflow_event;
+		/* sorry, no private data on the overflow event */
+		priv = NULL;
+	}
+
+	spin_lock(&event->lock);
+
+	if (list_empty(&event->holder.event_list)) {
+		if (unlikely(holder))
+			fsnotify_destroy_event_holder(holder);
+		holder = &event->holder;
+	} else if (unlikely(!holder)) {
+		/* between the time we checked above and got the lock the in
+		 * event holder was used, go back and get a new one */
+		spin_unlock(&event->lock);
+		mutex_unlock(&group->notification_mutex);
+		goto alloc_holder;
+	}
+
+	if (!list_empty(list)) {
+		last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
+		last_event = last_holder->event;
+		if (event_compare(last_event, event)) {
+			spin_unlock(&event->lock);
+			mutex_unlock(&group->notification_mutex);
+			if (holder != &event->holder)
+				fsnotify_destroy_event_holder(holder);
+			return -EEXIST;
+		}
+	}
+
+	group->q_len++;
+	holder->event = event;
+
+	fsnotify_get_event(event);
+	list_add_tail(&holder->event_list, list);
+	if (priv)
+		list_add_tail(&priv->event_list, &event->private_data_list);
+	spin_unlock(&event->lock);
+	mutex_unlock(&group->notification_mutex);
+
+	wake_up(&group->notification_waitq);
+	return 0;
+}
+
+/*
+ * Remove and return the first event from the notification list.  There is a
+ * reference held on this event since it was on the list.  It is the responsibility
+ * of the caller to drop this reference.
+ */
+struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group)
+{
+	struct fsnotify_event *event;
+	struct fsnotify_event_holder *holder;
+
+	BUG_ON(!mutex_is_locked(&group->notification_mutex));
+
+	holder = list_first_entry(&group->notification_list, struct fsnotify_event_holder, event_list);
+
+	event = holder->event;
+
+	spin_lock(&event->lock);
+	holder->event = NULL;
+	list_del_init(&holder->event_list);
+	spin_unlock(&event->lock);
+
+	/* event == holder means we are referenced through the in event holder */
+	if (holder != &event->holder)
+		fsnotify_destroy_event_holder(holder);
+
+	group->q_len--;
+
+	return event;
+}
+
+/*
+ * This will not remove the event, that must be done with fsnotify_remove_notify_event()
+ */
+struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group)
+{
+	struct fsnotify_event *event;
+	struct fsnotify_event_holder *holder;
+
+	BUG_ON(!mutex_is_locked(&group->notification_mutex));
+
+	holder = list_first_entry(&group->notification_list, struct fsnotify_event_holder, event_list);
+	event = holder->event;
+
+	return event;
+}
+
+/*
+ * Called when a group is being torn down to clean up any outstanding
+ * event notifications.
+ */
+void fsnotify_flush_notify(struct fsnotify_group *group)
+{
+	struct fsnotify_event *event;
+	struct fsnotify_event_private_data *priv;
+
+	mutex_lock(&group->notification_mutex);
+	while (!fsnotify_notify_queue_is_empty(group)) {
+		event = fsnotify_remove_notify_event(group);
+		/* if they don't implement free_event_priv they better not have attached any */
+		if (group->ops->free_event_priv) {
+			spin_lock(&event->lock);
+			priv = fsnotify_remove_priv_from_event(group, event);
+			spin_unlock(&event->lock);
+			if (priv)
+				group->ops->free_event_priv(priv);
+		}
+		fsnotify_put_event(event); /* matches fsnotify_add_notify_event */
+	}
+	mutex_unlock(&group->notification_mutex);
+}
+
+static void initialize_event(struct fsnotify_event *event)
+{
+	event->holder.event = NULL;
+	INIT_LIST_HEAD(&event->holder.event_list);
+	atomic_set(&event->refcnt, 1);
+
+	spin_lock_init(&event->lock);
+
+	event->path.dentry = NULL;
+	event->path.mnt = NULL;
+	event->inode = NULL;
+	event->data_type = FSNOTIFY_EVENT_NONE;
+
+	INIT_LIST_HEAD(&event->private_data_list);
+
+	event->to_tell = NULL;
+
+	event->file_name = NULL;
+	event->name_len = 0;
+
+	event->sync_cookie = 0;
+}
+
+/*
+ * fsnotify_create_event - Allocate a new event which will be sent to each
+ * group's handle_event function if the group was interested in this
+ * particular event.
+ *
+ * @to_tell the inode which is supposed to receive the event (sometimes a
+ *	parent of the inode to which the event happened.
+ * @mask what actually happened.
+ * @data pointer to the object which was actually affected
+ * @data_type flag indication if the data is a file, path, inode, nothing...
+ * @name the filename, if available
+ */
+struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
+					     int data_type, const char *name, u32 cookie)
+{
+	struct fsnotify_event *event;
+
+	event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+	if (!event)
+		return NULL;
+
+	initialize_event(event);
+
+	if (name) {
+		event->file_name = kstrdup(name, GFP_KERNEL);
+		if (!event->file_name) {
+			kmem_cache_free(fsnotify_event_cachep, event);
+			return NULL;
+		}
+		event->name_len = strlen(event->file_name);
+	}
+
+	event->sync_cookie = cookie;
+	event->to_tell = to_tell;
+
+	switch (data_type) {
+	case FSNOTIFY_EVENT_FILE: {
+		struct file *file = data;
+		struct path *path = &file->f_path;
+		event->path.dentry = path->dentry;
+		event->path.mnt = path->mnt;
+		path_get(&event->path);
+		event->data_type = FSNOTIFY_EVENT_PATH;
+		break;
+	}
+	case FSNOTIFY_EVENT_PATH: {
+		struct path *path = data;
+		event->path.dentry = path->dentry;
+		event->path.mnt = path->mnt;
+		path_get(&event->path);
+		event->data_type = FSNOTIFY_EVENT_PATH;
+		break;
+	}
+	case FSNOTIFY_EVENT_INODE:
+		event->inode = data;
+		event->data_type = FSNOTIFY_EVENT_INODE;
+		break;
+	case FSNOTIFY_EVENT_NONE:
+		event->inode = NULL;
+		event->path.dentry = NULL;
+		event->path.mnt = NULL;
+		break;
+	default:
+		BUG();
+	}
+
+	event->mask = mask;
+
+	return event;
+}
+
+__init int fsnotify_notification_init(void)
+{
+	fsnotify_event_cachep = KMEM_CACHE(fsnotify_event, SLAB_PANIC);
+	fsnotify_event_holder_cachep = KMEM_CACHE(fsnotify_event_holder, SLAB_PANIC);
+
+	initialize_event(&q_overflow_event);
+	q_overflow_event.mask = FS_Q_OVERFLOW;
+
+	return 0;
+}
+subsys_initcall(fsnotify_notification_init);
+
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 6aa7c471353..abaaa1cbf8d 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -443,6 +443,8 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 	ntfs_volume *vol = NTFS_SB(sb);
 
 	ntfs_debug("Entering with remount options string: %s", opt);
+
+	lock_kernel();
 #ifndef NTFS_RW
 	/* For read-only compiled driver, enforce read-only flag. */
 	*flags |= MS_RDONLY;
@@ -466,15 +468,18 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 		if (NVolErrors(vol)) {
 			ntfs_error(sb, "Volume has errors and is read-only%s",
 					es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (vol->vol_flags & VOLUME_IS_DIRTY) {
 			ntfs_error(sb, "Volume is dirty and read-only%s", es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
 			ntfs_error(sb, "Volume has been modified by chkdsk "
 					"and is read-only%s", es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
@@ -482,11 +487,13 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 					"(0x%x) and is read-only%s",
 					(unsigned)le16_to_cpu(vol->vol_flags),
 					es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (ntfs_set_volume_flags(vol, VOLUME_IS_DIRTY)) {
 			ntfs_error(sb, "Failed to set dirty bit in volume "
 					"information flags%s", es);
+			unlock_kernel();
 			return -EROFS;
 		}
 #if 0
@@ -506,18 +513,21 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 			ntfs_error(sb, "Failed to empty journal $LogFile%s",
 					es);
 			NVolSetErrors(vol);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (!ntfs_mark_quotas_out_of_date(vol)) {
 			ntfs_error(sb, "Failed to mark quotas out of date%s",
 					es);
 			NVolSetErrors(vol);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (!ntfs_stamp_usnjrnl(vol)) {
 			ntfs_error(sb, "Failed to stamp transation log "
 					"($UsnJrnl)%s", es);
 			NVolSetErrors(vol);
+			unlock_kernel();
 			return -EROFS;
 		}
 	} else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) {
@@ -533,8 +543,11 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 
 	// TODO: Deal with *flags.
 
-	if (!parse_options(vol, opt))
+	if (!parse_options(vol, opt)) {
+		unlock_kernel();
 		return -EINVAL;
+	}
+	unlock_kernel();
 	ntfs_debug("Done.");
 	return 0;
 }
@@ -2246,6 +2259,9 @@ static void ntfs_put_super(struct super_block *sb)
 	ntfs_volume *vol = NTFS_SB(sb);
 
 	ntfs_debug("Entering.");
+
+	lock_kernel();
+
 #ifdef NTFS_RW
 	/*
 	 * Commit all inodes while they are still open in case some of them
@@ -2373,39 +2389,12 @@ static void ntfs_put_super(struct super_block *sb)
 		vol->mftmirr_ino = NULL;
 	}
 	/*
-	 * If any dirty inodes are left, throw away all mft data page cache
-	 * pages to allow a clean umount.  This should never happen any more
-	 * due to mft.c::ntfs_mft_writepage() cleaning all the dirty pages as
-	 * the underlying mft records are written out and cleaned.  If it does,
-	 * happen anyway, we want to know...
+	 * We should have no dirty inodes left, due to
+	 * mft.c::ntfs_mft_writepage() cleaning all the dirty pages as
+	 * the underlying mft records are written out and cleaned.
 	 */
 	ntfs_commit_inode(vol->mft_ino);
 	write_inode_now(vol->mft_ino, 1);
-	if (sb_has_dirty_inodes(sb)) {
-		const char *s1, *s2;
-
-		mutex_lock(&vol->mft_ino->i_mutex);
-		truncate_inode_pages(vol->mft_ino->i_mapping, 0);
-		mutex_unlock(&vol->mft_ino->i_mutex);
-		write_inode_now(vol->mft_ino, 1);
-		if (sb_has_dirty_inodes(sb)) {
-			static const char *_s1 = "inodes";
-			static const char *_s2 = "";
-			s1 = _s1;
-			s2 = _s2;
-		} else {
-			static const char *_s1 = "mft pages";
-			static const char *_s2 = "They have been thrown "
-					"away.  ";
-			s1 = _s1;
-			s2 = _s2;
-		}
-		ntfs_error(sb, "Dirty %s found at umount time.  %sYou should "
-				"run chkdsk.  Please email "
-				"linux-ntfs-dev@lists.sourceforge.net and say "
-				"that you saw this message.  Thank you.", s1,
-				s2);
-	}
 #endif /* NTFS_RW */
 
 	iput(vol->mft_ino);
@@ -2444,7 +2433,8 @@ static void ntfs_put_super(struct super_block *sb)
 	}
 	sb->s_fs_info = NULL;
 	kfree(vol);
-	return;
+
+	unlock_kernel();
 }
 
 /**
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 678a067d925..9edcde4974a 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -475,6 +475,12 @@ struct ocfs2_path {
 #define path_leaf_el(_path) ((_path)->p_node[(_path)->p_tree_depth].el)
 #define path_num_items(_path) ((_path)->p_tree_depth + 1)
 
+static int ocfs2_find_path(struct inode *inode, struct ocfs2_path *path,
+			   u32 cpos);
+static void ocfs2_adjust_rightmost_records(struct inode *inode,
+					   handle_t *handle,
+					   struct ocfs2_path *path,
+					   struct ocfs2_extent_rec *insert_rec);
 /*
  * Reset the actual path elements so that we can re-use the structure
  * to build another path. Generally, this involves freeing the buffer
@@ -1013,6 +1019,54 @@ static inline u32 ocfs2_sum_rightmost_rec(struct ocfs2_extent_list  *el)
 }
 
 /*
+ * Change range of the branches in the right most path according to the leaf
+ * extent block's rightmost record.
+ */
+static int ocfs2_adjust_rightmost_branch(handle_t *handle,
+					 struct inode *inode,
+					 struct ocfs2_extent_tree *et)
+{
+	int status;
+	struct ocfs2_path *path = NULL;
+	struct ocfs2_extent_list *el;
+	struct ocfs2_extent_rec *rec;
+
+	path = ocfs2_new_path_from_et(et);
+	if (!path) {
+		status = -ENOMEM;
+		return status;
+	}
+
+	status = ocfs2_find_path(inode, path, UINT_MAX);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+
+	status = ocfs2_extend_trans(handle, path_num_items(path) +
+				    handle->h_buffer_credits);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+
+	status = ocfs2_journal_access_path(inode, handle, path);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+
+	el = path_leaf_el(path);
+	rec = &el->l_recs[le32_to_cpu(el->l_next_free_rec) - 1];
+
+	ocfs2_adjust_rightmost_records(inode, handle, path, rec);
+
+out:
+	ocfs2_free_path(path);
+	return status;
+}
+
+/*
  * Add an entire tree branch to our inode. eb_bh is the extent block
  * to start at, if we don't want to start the branch at the dinode
  * structure.
@@ -1038,7 +1092,7 @@ static int ocfs2_add_branch(struct ocfs2_super *osb,
 	struct ocfs2_extent_block *eb;
 	struct ocfs2_extent_list  *eb_el;
 	struct ocfs2_extent_list  *el;
-	u32 new_cpos;
+	u32 new_cpos, root_end;
 
 	mlog_entry_void();
 
@@ -1055,6 +1109,27 @@ static int ocfs2_add_branch(struct ocfs2_super *osb,
 
 	new_blocks = le16_to_cpu(el->l_tree_depth);
 
+	eb = (struct ocfs2_extent_block *)(*last_eb_bh)->b_data;
+	new_cpos = ocfs2_sum_rightmost_rec(&eb->h_list);
+	root_end = ocfs2_sum_rightmost_rec(et->et_root_el);
+
+	/*
+	 * If there is a gap before the root end and the real end
+	 * of the righmost leaf block, we need to remove the gap
+	 * between new_cpos and root_end first so that the tree
+	 * is consistent after we add a new branch(it will start
+	 * from new_cpos).
+	 */
+	if (root_end > new_cpos) {
+		mlog(0, "adjust the cluster end from %u to %u\n",
+		     root_end, new_cpos);
+		status = ocfs2_adjust_rightmost_branch(handle, inode, et);
+		if (status) {
+			mlog_errno(status);
+			goto bail;
+		}
+	}
+
 	/* allocate the number of new eb blocks we need */
 	new_eb_bhs = kcalloc(new_blocks, sizeof(struct buffer_head *),
 			     GFP_KERNEL);
@@ -1071,9 +1146,6 @@ static int ocfs2_add_branch(struct ocfs2_super *osb,
 		goto bail;
 	}
 
-	eb = (struct ocfs2_extent_block *)(*last_eb_bh)->b_data;
-	new_cpos = ocfs2_sum_rightmost_rec(&eb->h_list);
-
 	/* Note: new_eb_bhs[new_blocks - 1] is the guy which will be
 	 * linked with the rest of the tree.
 	 * conversly, new_eb_bhs[0] is the new bottommost leaf.
diff --git a/fs/ocfs2/blockcheck.c b/fs/ocfs2/blockcheck.c
index 2a947c44e59..a1163b8b417 100644
--- a/fs/ocfs2/blockcheck.c
+++ b/fs/ocfs2/blockcheck.c
@@ -22,6 +22,9 @@
 #include <linux/crc32.h>
 #include <linux/buffer_head.h>
 #include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/fs.h>
 #include <asm/byteorder.h>
 
 #include <cluster/masklog.h>
@@ -222,6 +225,155 @@ void ocfs2_hamming_fix_block(void *data, unsigned int blocksize,
 	ocfs2_hamming_fix(data, blocksize * 8, 0, fix);
 }
 
+
+/*
+ * Debugfs handling.
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int blockcheck_u64_get(void *data, u64 *val)
+{
+	*val = *(u64 *)data;
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(blockcheck_fops, blockcheck_u64_get, NULL, "%llu\n");
+
+static struct dentry *blockcheck_debugfs_create(const char *name,
+						struct dentry *parent,
+						u64 *value)
+{
+	return debugfs_create_file(name, S_IFREG | S_IRUSR, parent, value,
+				   &blockcheck_fops);
+}
+
+static void ocfs2_blockcheck_debug_remove(struct ocfs2_blockcheck_stats *stats)
+{
+	if (stats) {
+		debugfs_remove(stats->b_debug_check);
+		stats->b_debug_check = NULL;
+		debugfs_remove(stats->b_debug_failure);
+		stats->b_debug_failure = NULL;
+		debugfs_remove(stats->b_debug_recover);
+		stats->b_debug_recover = NULL;
+		debugfs_remove(stats->b_debug_dir);
+		stats->b_debug_dir = NULL;
+	}
+}
+
+static int ocfs2_blockcheck_debug_install(struct ocfs2_blockcheck_stats *stats,
+					  struct dentry *parent)
+{
+	int rc = -EINVAL;
+
+	if (!stats)
+		goto out;
+
+	stats->b_debug_dir = debugfs_create_dir("blockcheck", parent);
+	if (!stats->b_debug_dir)
+		goto out;
+
+	stats->b_debug_check =
+		blockcheck_debugfs_create("blocks_checked",
+					  stats->b_debug_dir,
+					  &stats->b_check_count);
+
+	stats->b_debug_failure =
+		blockcheck_debugfs_create("checksums_failed",
+					  stats->b_debug_dir,
+					  &stats->b_failure_count);
+
+	stats->b_debug_recover =
+		blockcheck_debugfs_create("ecc_recoveries",
+					  stats->b_debug_dir,
+					  &stats->b_recover_count);
+	if (stats->b_debug_check && stats->b_debug_failure &&
+	    stats->b_debug_recover)
+		rc = 0;
+
+out:
+	if (rc)
+		ocfs2_blockcheck_debug_remove(stats);
+	return rc;
+}
+#else
+static inline int ocfs2_blockcheck_debug_install(struct ocfs2_blockcheck_stats *stats,
+						 struct dentry *parent)
+{
+	return 0;
+}
+
+static inline void ocfs2_blockcheck_debug_remove(struct ocfs2_blockcheck_stats *stats)
+{
+}
+#endif  /* CONFIG_DEBUG_FS */
+
+/* Always-called wrappers for starting and stopping the debugfs files */
+int ocfs2_blockcheck_stats_debugfs_install(struct ocfs2_blockcheck_stats *stats,
+					   struct dentry *parent)
+{
+	return ocfs2_blockcheck_debug_install(stats, parent);
+}
+
+void ocfs2_blockcheck_stats_debugfs_remove(struct ocfs2_blockcheck_stats *stats)
+{
+	ocfs2_blockcheck_debug_remove(stats);
+}
+
+static void ocfs2_blockcheck_inc_check(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_check_count++;
+	new_count = stats->b_check_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "Block check count has wrapped\n");
+}
+
+static void ocfs2_blockcheck_inc_failure(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_failure_count++;
+	new_count = stats->b_failure_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "Checksum failure count has wrapped\n");
+}
+
+static void ocfs2_blockcheck_inc_recover(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_recover_count++;
+	new_count = stats->b_recover_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "ECC recovery count has wrapped\n");
+}
+
+
+
+/*
+ * These are the low-level APIs for using the ocfs2_block_check structure.
+ */
+
 /*
  * This function generates check information for a block.
  * data is the block to be checked.  bc is a pointer to the
@@ -266,12 +418,15 @@ void ocfs2_block_check_compute(void *data, size_t blocksize,
  * Again, the data passed in should be the on-disk endian.
  */
 int ocfs2_block_check_validate(void *data, size_t blocksize,
-			       struct ocfs2_block_check *bc)
+			       struct ocfs2_block_check *bc,
+			       struct ocfs2_blockcheck_stats *stats)
 {
 	int rc = 0;
 	struct ocfs2_block_check check;
 	u32 crc, ecc;
 
+	ocfs2_blockcheck_inc_check(stats);
+
 	check.bc_crc32e = le32_to_cpu(bc->bc_crc32e);
 	check.bc_ecc = le16_to_cpu(bc->bc_ecc);
 
@@ -282,6 +437,7 @@ int ocfs2_block_check_validate(void *data, size_t blocksize,
 	if (crc == check.bc_crc32e)
 		goto out;
 
+	ocfs2_blockcheck_inc_failure(stats);
 	mlog(ML_ERROR,
 	     "CRC32 failed: stored: %u, computed %u.  Applying ECC.\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -292,8 +448,10 @@ int ocfs2_block_check_validate(void *data, size_t blocksize,
 
 	/* And check the crc32 again */
 	crc = crc32_le(~0, data, blocksize);
-	if (crc == check.bc_crc32e)
+	if (crc == check.bc_crc32e) {
+		ocfs2_blockcheck_inc_recover(stats);
 		goto out;
+	}
 
 	mlog(ML_ERROR, "Fixed CRC32 failed: stored: %u, computed %u\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -366,7 +524,8 @@ void ocfs2_block_check_compute_bhs(struct buffer_head **bhs, int nr,
  * Again, the data passed in should be the on-disk endian.
  */
 int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
-				   struct ocfs2_block_check *bc)
+				   struct ocfs2_block_check *bc,
+				   struct ocfs2_blockcheck_stats *stats)
 {
 	int i, rc = 0;
 	struct ocfs2_block_check check;
@@ -377,6 +536,8 @@ int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
 	if (!nr)
 		return 0;
 
+	ocfs2_blockcheck_inc_check(stats);
+
 	check.bc_crc32e = le32_to_cpu(bc->bc_crc32e);
 	check.bc_ecc = le16_to_cpu(bc->bc_ecc);
 
@@ -388,6 +549,7 @@ int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
 	if (crc == check.bc_crc32e)
 		goto out;
 
+	ocfs2_blockcheck_inc_failure(stats);
 	mlog(ML_ERROR,
 	     "CRC32 failed: stored: %u, computed %u.  Applying ECC.\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -416,8 +578,10 @@ int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
 	/* And check the crc32 again */
 	for (i = 0, crc = ~0; i < nr; i++)
 		crc = crc32_le(crc, bhs[i]->b_data, bhs[i]->b_size);
-	if (crc == check.bc_crc32e)
+	if (crc == check.bc_crc32e) {
+		ocfs2_blockcheck_inc_recover(stats);
 		goto out;
+	}
 
 	mlog(ML_ERROR, "Fixed CRC32 failed: stored: %u, computed %u\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -448,9 +612,11 @@ int ocfs2_validate_meta_ecc(struct super_block *sb, void *data,
 			    struct ocfs2_block_check *bc)
 {
 	int rc = 0;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
 
-	if (ocfs2_meta_ecc(OCFS2_SB(sb)))
-		rc = ocfs2_block_check_validate(data, sb->s_blocksize, bc);
+	if (ocfs2_meta_ecc(osb))
+		rc = ocfs2_block_check_validate(data, sb->s_blocksize, bc,
+						&osb->osb_ecc_stats);
 
 	return rc;
 }
@@ -468,9 +634,11 @@ int ocfs2_validate_meta_ecc_bhs(struct super_block *sb,
 				struct ocfs2_block_check *bc)
 {
 	int rc = 0;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
 
-	if (ocfs2_meta_ecc(OCFS2_SB(sb)))
-		rc = ocfs2_block_check_validate_bhs(bhs, nr, bc);
+	if (ocfs2_meta_ecc(osb))
+		rc = ocfs2_block_check_validate_bhs(bhs, nr, bc,
+						    &osb->osb_ecc_stats);
 
 	return rc;
 }
diff --git a/fs/ocfs2/blockcheck.h b/fs/ocfs2/blockcheck.h
index 70ec3feda32..d4b69febf70 100644
--- a/fs/ocfs2/blockcheck.h
+++ b/fs/ocfs2/blockcheck.h
@@ -21,6 +21,24 @@
 #define OCFS2_BLOCKCHECK_H
 
 
+/* Count errors and error correction from blockcheck.c */
+struct ocfs2_blockcheck_stats {
+	spinlock_t b_lock;
+	u64 b_check_count;	/* Number of blocks we've checked */
+	u64 b_failure_count;	/* Number of failed checksums */
+	u64 b_recover_count;	/* Number of blocks fixed by ecc */
+
+	/*
+	 * debugfs entries, used if this is passed to
+	 * ocfs2_blockcheck_stats_debugfs_install()
+	 */
+	struct dentry *b_debug_dir;	/* Parent of the debugfs  files */
+	struct dentry *b_debug_check;	/* Exposes b_check_count */
+	struct dentry *b_debug_failure;	/* Exposes b_failure_count */
+	struct dentry *b_debug_recover;	/* Exposes b_recover_count */
+};
+
+
 /* High level block API */
 void ocfs2_compute_meta_ecc(struct super_block *sb, void *data,
 			    struct ocfs2_block_check *bc);
@@ -37,11 +55,18 @@ int ocfs2_validate_meta_ecc_bhs(struct super_block *sb,
 void ocfs2_block_check_compute(void *data, size_t blocksize,
 			       struct ocfs2_block_check *bc);
 int ocfs2_block_check_validate(void *data, size_t blocksize,
-			       struct ocfs2_block_check *bc);
+			       struct ocfs2_block_check *bc,
+			       struct ocfs2_blockcheck_stats *stats);
 void ocfs2_block_check_compute_bhs(struct buffer_head **bhs, int nr,
 				   struct ocfs2_block_check *bc);
 int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
-				   struct ocfs2_block_check *bc);
+				   struct ocfs2_block_check *bc,
+				   struct ocfs2_blockcheck_stats *stats);
+
+/* Debug Initialization */
+int ocfs2_blockcheck_stats_debugfs_install(struct ocfs2_blockcheck_stats *stats,
+					   struct dentry *parent);
+void ocfs2_blockcheck_stats_debugfs_remove(struct ocfs2_blockcheck_stats *stats);
 
 /*
  * Hamming code functions
diff --git a/fs/ocfs2/cluster/masklog.h b/fs/ocfs2/cluster/masklog.h
index 7e72a81bc2d..696c32e5071 100644
--- a/fs/ocfs2/cluster/masklog.h
+++ b/fs/ocfs2/cluster/masklog.h
@@ -48,34 +48,33 @@
  * only emit the appropriage printk() when the caller passes in a constant
  * mask, as is almost always the case.
  *
- * All this bitmask nonsense is hidden from the /proc interface so that Joel
- * doesn't have an aneurism.  Reading the file gives a straight forward
- * indication of which bits are on or off:
- * 	ENTRY off
- * 	EXIT off
+ * All this bitmask nonsense is managed from the files under
+ * /sys/fs/o2cb/logmask/.  Reading the files gives a straightforward
+ * indication of which bits are allowed (allow) or denied (off/deny).
+ * 	ENTRY deny
+ * 	EXIT deny
  * 	TCP off
  * 	MSG off
  * 	SOCKET off
- * 	ERROR off
- * 	NOTICE on
+ * 	ERROR allow
+ * 	NOTICE allow
  *
  * Writing changes the state of a given bit and requires a strictly formatted
  * single write() call:
  *
- * 	write(fd, "ENTRY on", 8);
+ * 	write(fd, "allow", 5);
  *
- * would turn the entry bit on.  "1" is also accepted in the place of "on", and
- * "off" and "0" behave as expected.
+ * Echoing allow/deny/off string into the logmask files can flip the bits
+ * on or off as expected; here is the bash script for example:
  *
- * Some trivial shell can flip all the bits on or off:
+ * log_mask="/sys/fs/o2cb/log_mask"
+ * for node in ENTRY EXIT TCP MSG SOCKET ERROR NOTICE; do
+ *	echo allow >"$log_mask"/"$node"
+ * done
  *
- * log_mask="/proc/fs/ocfs2_nodemanager/log_mask"
- * cat $log_mask | (
- * 	while read bit status; do
- * 		# $1 is "on" or "off", say
- * 		echo "$bit $1" > $log_mask
- * 	done
- * )
+ * The debugfs.ocfs2 tool can also flip the bits with the -l option:
+ *
+ * debugfs.ocfs2 -l TCP allow
  */
 
 /* for task_struct */
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 9fbe849f634..334f231a422 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -974,7 +974,7 @@ static int o2net_tx_can_proceed(struct o2net_node *nn,
 int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
 			   size_t caller_veclen, u8 target_node, int *status)
 {
-	int ret, error = 0;
+	int ret;
 	struct o2net_msg *msg = NULL;
 	size_t veclen, caller_bytes = 0;
 	struct kvec *vec = NULL;
@@ -1015,10 +1015,7 @@ int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
 
 	o2net_set_nst_sock_time(&nst);
 
-	ret = wait_event_interruptible(nn->nn_sc_wq,
-				       o2net_tx_can_proceed(nn, &sc, &error));
-	if (!ret && error)
-		ret = error;
+	wait_event(nn->nn_sc_wq, o2net_tx_can_proceed(nn, &sc, &ret));
 	if (ret)
 		goto out;
 
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index c5752305627..b358f3bf896 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2900,6 +2900,8 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	alloc = ocfs2_clusters_for_bytes(sb, bytes);
 	dx_alloc = 0;
 
+	down_write(&oi->ip_alloc_sem);
+
 	if (ocfs2_supports_indexed_dirs(osb)) {
 		credits += ocfs2_add_dir_index_credits(sb);
 
@@ -2940,8 +2942,6 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 		goto out;
 	}
 
-	down_write(&oi->ip_alloc_sem);
-
 	/*
 	 * Prepare for worst case allocation scenario of two separate
 	 * extents in the unindexed tree.
@@ -2953,7 +2953,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	if (IS_ERR(handle)) {
 		ret = PTR_ERR(handle);
 		mlog_errno(ret);
-		goto out_sem;
+		goto out;
 	}
 
 	if (vfs_dq_alloc_space_nodirty(dir,
@@ -3172,10 +3172,8 @@ out_commit:
 
 	ocfs2_commit_trans(osb, handle);
 
-out_sem:
-	up_write(&oi->ip_alloc_sem);
-
 out:
+	up_write(&oi->ip_alloc_sem);
 	if (data_ac)
 		ocfs2_free_alloc_context(data_ac);
 	if (meta_ac)
@@ -3322,11 +3320,15 @@ static int ocfs2_extend_dir(struct ocfs2_super *osb,
 		brelse(new_bh);
 		new_bh = NULL;
 
+		down_write(&OCFS2_I(dir)->ip_alloc_sem);
+		drop_alloc_sem = 1;
 		dir_i_size = i_size_read(dir);
 		credits = OCFS2_SIMPLE_DIR_EXTEND_CREDITS;
 		goto do_extend;
 	}
 
+	down_write(&OCFS2_I(dir)->ip_alloc_sem);
+	drop_alloc_sem = 1;
 	dir_i_size = i_size_read(dir);
 	mlog(0, "extending dir %llu (i_size = %lld)\n",
 	     (unsigned long long)OCFS2_I(dir)->ip_blkno, dir_i_size);
@@ -3370,9 +3372,6 @@ do_extend:
 		credits++; /* For attaching the new dirent block to the
 			    * dx_root */
 
-	down_write(&OCFS2_I(dir)->ip_alloc_sem);
-	drop_alloc_sem = 1;
-
 	handle = ocfs2_start_trans(osb, credits);
 	if (IS_ERR(handle)) {
 		status = PTR_ERR(handle);
@@ -3435,10 +3434,10 @@ bail_bh:
 	*new_de_bh = new_bh;
 	get_bh(*new_de_bh);
 bail:
-	if (drop_alloc_sem)
-		up_write(&OCFS2_I(dir)->ip_alloc_sem);
 	if (handle)
 		ocfs2_commit_trans(osb, handle);
+	if (drop_alloc_sem)
+		up_write(&OCFS2_I(dir)->ip_alloc_sem);
 
 	if (data_ac)
 		ocfs2_free_alloc_context(data_ac);
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index e15fc7d5082..6cdeaa76f27 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -248,6 +248,10 @@ static struct ocfs2_lock_res_ops ocfs2_nfs_sync_lops = {
 	.flags		= 0,
 };
 
+static struct ocfs2_lock_res_ops ocfs2_orphan_scan_lops = {
+	.flags		= LOCK_TYPE_REQUIRES_REFRESH|LOCK_TYPE_USES_LVB,
+};
+
 static struct ocfs2_lock_res_ops ocfs2_dentry_lops = {
 	.get_osb	= ocfs2_get_dentry_osb,
 	.post_unlock	= ocfs2_dentry_post_unlock,
@@ -637,6 +641,19 @@ static void ocfs2_nfs_sync_lock_res_init(struct ocfs2_lock_res *res,
 				   &ocfs2_nfs_sync_lops, osb);
 }
 
+static void ocfs2_orphan_scan_lock_res_init(struct ocfs2_lock_res *res,
+					    struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan_lvb *lvb;
+
+	ocfs2_lock_res_init_once(res);
+	ocfs2_build_lock_name(OCFS2_LOCK_TYPE_ORPHAN_SCAN, 0, 0, res->l_name);
+	ocfs2_lock_res_init_common(osb, res, OCFS2_LOCK_TYPE_ORPHAN_SCAN,
+				   &ocfs2_orphan_scan_lops, osb);
+	lvb = ocfs2_dlm_lvb(&res->l_lksb);
+	lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
+}
+
 void ocfs2_file_lock_res_init(struct ocfs2_lock_res *lockres,
 			      struct ocfs2_file_private *fp)
 {
@@ -2352,6 +2369,37 @@ void ocfs2_inode_unlock(struct inode *inode,
 	mlog_exit_void();
 }
 
+int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno, int ex)
+{
+	struct ocfs2_lock_res *lockres;
+	struct ocfs2_orphan_scan_lvb *lvb;
+	int level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
+	int status = 0;
+
+	lockres = &osb->osb_orphan_scan.os_lockres;
+	status = ocfs2_cluster_lock(osb, lockres, level, 0, 0);
+	if (status < 0)
+		return status;
+
+	lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
+	if (lvb->lvb_version == OCFS2_ORPHAN_LVB_VERSION)
+		*seqno = be32_to_cpu(lvb->lvb_os_seqno);
+	return status;
+}
+
+void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno, int ex)
+{
+	struct ocfs2_lock_res *lockres;
+	struct ocfs2_orphan_scan_lvb *lvb;
+	int level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
+
+	lockres = &osb->osb_orphan_scan.os_lockres;
+	lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
+	lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
+	lvb->lvb_os_seqno = cpu_to_be32(seqno);
+	ocfs2_cluster_unlock(osb, lockres, level);
+}
+
 int ocfs2_super_lock(struct ocfs2_super *osb,
 		     int ex)
 {
@@ -2842,6 +2890,7 @@ local:
 	ocfs2_super_lock_res_init(&osb->osb_super_lockres, osb);
 	ocfs2_rename_lock_res_init(&osb->osb_rename_lockres, osb);
 	ocfs2_nfs_sync_lock_res_init(&osb->osb_nfs_sync_lockres, osb);
+	ocfs2_orphan_scan_lock_res_init(&osb->osb_orphan_scan.os_lockres, osb);
 
 	osb->cconn = conn;
 
@@ -2878,6 +2927,7 @@ void ocfs2_dlm_shutdown(struct ocfs2_super *osb,
 	ocfs2_lock_res_free(&osb->osb_super_lockres);
 	ocfs2_lock_res_free(&osb->osb_rename_lockres);
 	ocfs2_lock_res_free(&osb->osb_nfs_sync_lockres);
+	ocfs2_lock_res_free(&osb->osb_orphan_scan.os_lockres);
 
 	ocfs2_cluster_disconnect(osb->cconn, hangup_pending);
 	osb->cconn = NULL;
@@ -3061,6 +3111,7 @@ static void ocfs2_drop_osb_locks(struct ocfs2_super *osb)
 	ocfs2_simple_drop_lockres(osb, &osb->osb_super_lockres);
 	ocfs2_simple_drop_lockres(osb, &osb->osb_rename_lockres);
 	ocfs2_simple_drop_lockres(osb, &osb->osb_nfs_sync_lockres);
+	ocfs2_simple_drop_lockres(osb, &osb->osb_orphan_scan.os_lockres);
 }
 
 int ocfs2_drop_inode_locks(struct inode *inode)
diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
index e1fd5721cd7..31b90d7b8f5 100644
--- a/fs/ocfs2/dlmglue.h
+++ b/fs/ocfs2/dlmglue.h
@@ -62,6 +62,14 @@ struct ocfs2_qinfo_lvb {
 	__be32	lvb_free_entry;
 };
 
+#define OCFS2_ORPHAN_LVB_VERSION 1
+
+struct ocfs2_orphan_scan_lvb {
+	__u8	lvb_version;
+	__u8	lvb_reserved[3];
+	__be32	lvb_os_seqno;
+};
+
 /* ocfs2_inode_lock_full() 'arg_flags' flags */
 /* don't wait on recovery. */
 #define OCFS2_META_LOCK_RECOVERY	(0x01)
@@ -113,6 +121,9 @@ int ocfs2_super_lock(struct ocfs2_super *osb,
 		     int ex);
 void ocfs2_super_unlock(struct ocfs2_super *osb,
 			int ex);
+int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno, int ex);
+void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno, int ex);
+
 int ocfs2_rename_lock(struct ocfs2_super *osb);
 void ocfs2_rename_unlock(struct ocfs2_super *osb);
 int ocfs2_nfs_sync_lock(struct ocfs2_super *osb, int ex);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index c2a87c885b7..07267e0da90 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -187,6 +187,9 @@ static int ocfs2_sync_file(struct file *file,
 	if (err)
 		goto bail;
 
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		goto bail;
+
 	journal = osb->journal->j_journal;
 	err = jbd2_journal_force_commit(journal);
 
@@ -894,9 +897,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 	struct ocfs2_super *osb = OCFS2_SB(sb);
 	struct buffer_head *bh = NULL;
 	handle_t *handle = NULL;
-	int locked[MAXQUOTAS] = {0, 0};
-	int credits, qtype;
-	struct ocfs2_mem_dqinfo *oinfo;
+	int qtype;
+	struct dquot *transfer_from[MAXQUOTAS] = { };
+	struct dquot *transfer_to[MAXQUOTAS] = { };
 
 	mlog_entry("(0x%p, '%.*s')\n", dentry,
 	           dentry->d_name.len, dentry->d_name.name);
@@ -969,30 +972,37 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 
 	if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
 	    (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
-		credits = OCFS2_INODE_UPDATE_CREDITS;
+		/*
+		 * Gather pointers to quota structures so that allocation /
+		 * freeing of quota structures happens here and not inside
+		 * vfs_dq_transfer() where we have problems with lock ordering
+		 */
 		if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid
 		    && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
 		    OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
-			oinfo = sb_dqinfo(sb, USRQUOTA)->dqi_priv;
-			status = ocfs2_lock_global_qf(oinfo, 1);
-			if (status < 0)
+			transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid,
+						      USRQUOTA);
+			transfer_from[USRQUOTA] = dqget(sb, inode->i_uid,
+							USRQUOTA);
+			if (!transfer_to[USRQUOTA] || !transfer_from[USRQUOTA]) {
+				status = -ESRCH;
 				goto bail_unlock;
-			credits += ocfs2_calc_qinit_credits(sb, USRQUOTA) +
-				ocfs2_calc_qdel_credits(sb, USRQUOTA);
-			locked[USRQUOTA] = 1;
+			}
 		}
 		if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid
 		    && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
 		    OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
-			oinfo = sb_dqinfo(sb, GRPQUOTA)->dqi_priv;
-			status = ocfs2_lock_global_qf(oinfo, 1);
-			if (status < 0)
+			transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid,
+						      GRPQUOTA);
+			transfer_from[GRPQUOTA] = dqget(sb, inode->i_gid,
+							GRPQUOTA);
+			if (!transfer_to[GRPQUOTA] || !transfer_from[GRPQUOTA]) {
+				status = -ESRCH;
 				goto bail_unlock;
-			credits += ocfs2_calc_qinit_credits(sb, GRPQUOTA) +
-				   ocfs2_calc_qdel_credits(sb, GRPQUOTA);
-			locked[GRPQUOTA] = 1;
+			}
 		}
-		handle = ocfs2_start_trans(osb, credits);
+		handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS +
+					   2 * ocfs2_quota_trans_credits(sb));
 		if (IS_ERR(handle)) {
 			status = PTR_ERR(handle);
 			mlog_errno(status);
@@ -1030,12 +1040,6 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 bail_commit:
 	ocfs2_commit_trans(osb, handle);
 bail_unlock:
-	for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
-		if (!locked[qtype])
-			continue;
-		oinfo = sb_dqinfo(sb, qtype)->dqi_priv;
-		ocfs2_unlock_global_qf(oinfo, 1);
-	}
 	ocfs2_inode_unlock(inode, 1);
 bail_unlock_rw:
 	if (size_change)
@@ -1043,6 +1047,12 @@ bail_unlock_rw:
 bail:
 	brelse(bh);
 
+	/* Release quota pointers in case we acquired them */
+	for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
+		dqput(transfer_to[qtype]);
+		dqput(transfer_from[qtype]);
+	}
+
 	if (!status && attr->ia_valid & ATTR_MODE) {
 		status = ocfs2_acl_chmod(inode);
 		if (status < 0)
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index a20a0f1e37f..4a3b9e6b31a 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -28,6 +28,8 @@
 #include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/kthread.h>
+#include <linux/time.h>
+#include <linux/random.h>
 
 #define MLOG_MASK_PREFIX ML_JOURNAL
 #include <cluster/masklog.h>
@@ -52,6 +54,8 @@
 
 DEFINE_SPINLOCK(trans_inc_lock);
 
+#define ORPHAN_SCAN_SCHEDULE_TIMEOUT 300000
+
 static int ocfs2_force_read_journal(struct inode *inode);
 static int ocfs2_recover_node(struct ocfs2_super *osb,
 			      int node_num, int slot_num);
@@ -1841,6 +1845,113 @@ bail:
 	return status;
 }
 
+/*
+ * Scan timer should get fired every ORPHAN_SCAN_SCHEDULE_TIMEOUT. Add some
+ * randomness to the timeout to minimize multple nodes firing the timer at the
+ * same time.
+ */
+static inline unsigned long ocfs2_orphan_scan_timeout(void)
+{
+	unsigned long time;
+
+	get_random_bytes(&time, sizeof(time));
+	time = ORPHAN_SCAN_SCHEDULE_TIMEOUT + (time % 5000);
+	return msecs_to_jiffies(time);
+}
+
+/*
+ * ocfs2_queue_orphan_scan calls ocfs2_queue_recovery_completion for
+ * every slot, queuing a recovery of the slot on the ocfs2_wq thread. This
+ * is done to catch any orphans that are left over in orphan directories.
+ *
+ * ocfs2_queue_orphan_scan gets called every ORPHAN_SCAN_SCHEDULE_TIMEOUT
+ * seconds.  It gets an EX lock on os_lockres and checks sequence number
+ * stored in LVB. If the sequence number has changed, it means some other
+ * node has done the scan.  This node skips the scan and tracks the
+ * sequence number.  If the sequence number didn't change, it means a scan
+ * hasn't happened.  The node queues a scan and increments the
+ * sequence number in the LVB.
+ */
+void ocfs2_queue_orphan_scan(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+	int status, i;
+	u32 seqno = 0;
+
+	os = &osb->osb_orphan_scan;
+
+	status = ocfs2_orphan_scan_lock(osb, &seqno, DLM_LOCK_EX);
+	if (status < 0) {
+		if (status != -EAGAIN)
+			mlog_errno(status);
+		goto out;
+	}
+
+	if (os->os_seqno != seqno) {
+		os->os_seqno = seqno;
+		goto unlock;
+	}
+
+	for (i = 0; i < osb->max_slots; i++)
+		ocfs2_queue_recovery_completion(osb->journal, i, NULL, NULL,
+						NULL);
+	/*
+	 * We queued a recovery on orphan slots, increment the sequence
+	 * number and update LVB so other node will skip the scan for a while
+	 */
+	seqno++;
+	os->os_count++;
+	os->os_scantime = CURRENT_TIME;
+unlock:
+	ocfs2_orphan_scan_unlock(osb, seqno, DLM_LOCK_EX);
+out:
+	return;
+}
+
+/* Worker task that gets fired every ORPHAN_SCAN_SCHEDULE_TIMEOUT millsec */
+void ocfs2_orphan_scan_work(struct work_struct *work)
+{
+	struct ocfs2_orphan_scan *os;
+	struct ocfs2_super *osb;
+
+	os = container_of(work, struct ocfs2_orphan_scan,
+			  os_orphan_scan_work.work);
+	osb = os->os_osb;
+
+	mutex_lock(&os->os_lock);
+	ocfs2_queue_orphan_scan(osb);
+	schedule_delayed_work(&os->os_orphan_scan_work,
+			      ocfs2_orphan_scan_timeout());
+	mutex_unlock(&os->os_lock);
+}
+
+void ocfs2_orphan_scan_stop(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+
+	os = &osb->osb_orphan_scan;
+	mutex_lock(&os->os_lock);
+	cancel_delayed_work(&os->os_orphan_scan_work);
+	mutex_unlock(&os->os_lock);
+}
+
+int ocfs2_orphan_scan_init(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+
+	os = &osb->osb_orphan_scan;
+	os->os_osb = osb;
+	os->os_count = 0;
+	os->os_scantime = CURRENT_TIME;
+	mutex_init(&os->os_lock);
+
+	INIT_DELAYED_WORK(&os->os_orphan_scan_work,
+			  ocfs2_orphan_scan_work);
+	schedule_delayed_work(&os->os_orphan_scan_work,
+			      ocfs2_orphan_scan_timeout());
+	return 0;
+}
+
 struct ocfs2_orphan_filldir_priv {
 	struct inode		*head;
 	struct ocfs2_super	*osb;
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index eb7b76331eb..61045eeb3f6 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -144,6 +144,10 @@ static inline void ocfs2_inode_set_new(struct ocfs2_super *osb,
 }
 
 /* Exported only for the journal struct init code in super.c. Do not call. */
+int ocfs2_orphan_scan_init(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_stop(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_exit(struct ocfs2_super *osb);
+
 void ocfs2_complete_recovery(struct work_struct *work);
 void ocfs2_wait_for_recovery(struct ocfs2_super *osb);
 
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 1386281950d..18c1d9ec1c9 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -47,6 +47,9 @@
 #include "ocfs2_fs.h"
 #include "ocfs2_lockid.h"
 
+/* For struct ocfs2_blockcheck_stats */
+#include "blockcheck.h"
+
 /* Most user visible OCFS2 inodes will have very few pieces of
  * metadata, but larger files (including bitmaps, etc) must be taken
  * into account when designing an access scheme. We allow a small
@@ -151,6 +154,16 @@ struct ocfs2_lock_res {
 #endif
 };
 
+struct ocfs2_orphan_scan {
+	struct mutex 		os_lock;
+	struct ocfs2_super 	*os_osb;
+	struct ocfs2_lock_res 	os_lockres;     /* lock to synchronize scans */
+	struct delayed_work 	os_orphan_scan_work;
+	struct timespec		os_scantime;  /* time this node ran the scan */
+	u32			os_count;      /* tracks node specific scans */
+	u32  			os_seqno;       /* tracks cluster wide scans */
+};
+
 struct ocfs2_dlm_debug {
 	struct kref d_refcnt;
 	struct dentry *d_locking_state;
@@ -295,6 +308,7 @@ struct ocfs2_super
 	struct ocfs2_dinode *local_alloc_copy;
 	struct ocfs2_quota_recovery *quota_rec;
 
+	struct ocfs2_blockcheck_stats osb_ecc_stats;
 	struct ocfs2_alloc_stats alloc_stats;
 	char dev_str[20];		/* "major,minor" of the device */
 
@@ -341,6 +355,8 @@ struct ocfs2_super
 	unsigned int			*osb_orphan_wipes;
 	wait_queue_head_t		osb_wipe_event;
 
+	struct ocfs2_orphan_scan	osb_orphan_scan;
+
 	/* used to protect metaecc calculation check of xattr. */
 	spinlock_t osb_xattr_lock;
 
diff --git a/fs/ocfs2/ocfs2_lockid.h b/fs/ocfs2/ocfs2_lockid.h
index a53ce87481b..fcdba091af3 100644
--- a/fs/ocfs2/ocfs2_lockid.h
+++ b/fs/ocfs2/ocfs2_lockid.h
@@ -48,6 +48,7 @@ enum ocfs2_lock_type {
 	OCFS2_LOCK_TYPE_FLOCK,
 	OCFS2_LOCK_TYPE_QINFO,
 	OCFS2_LOCK_TYPE_NFS_SYNC,
+	OCFS2_LOCK_TYPE_ORPHAN_SCAN,
 	OCFS2_NUM_LOCK_TYPES
 };
 
@@ -85,6 +86,9 @@ static inline char ocfs2_lock_type_char(enum ocfs2_lock_type type)
 		case OCFS2_LOCK_TYPE_NFS_SYNC:
 			c = 'Y';
 			break;
+		case OCFS2_LOCK_TYPE_ORPHAN_SCAN:
+			c = 'P';
+			break;
 		default:
 			c = '\0';
 	}
@@ -104,6 +108,7 @@ static char *ocfs2_lock_type_strings[] = {
 	[OCFS2_LOCK_TYPE_OPEN] = "Open",
 	[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
 	[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+	[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
 };
 
 static inline const char *ocfs2_lock_type_string(enum ocfs2_lock_type type)
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 1ed0f7c8686..edfa60cd155 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -421,6 +421,7 @@ int ocfs2_global_read_dquot(struct dquot *dquot)
 	OCFS2_DQUOT(dquot)->dq_originodes = dquot->dq_dqb.dqb_curinodes;
 	if (!dquot->dq_off) {	/* No real quota entry? */
 		/* Upgrade to exclusive lock for allocation */
+		ocfs2_qinfo_unlock(info, 0);
 		err = ocfs2_qinfo_lock(info, 1);
 		if (err < 0)
 			goto out_qlock;
@@ -435,7 +436,8 @@ int ocfs2_global_read_dquot(struct dquot *dquot)
 out_qlock:
 	if (ex)
 		ocfs2_qinfo_unlock(info, 1);
-	ocfs2_qinfo_unlock(info, 0);
+	else
+		ocfs2_qinfo_unlock(info, 0);
 out:
 	if (err < 0)
 		mlog_errno(err);
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 07deec5e972..5a460fa8255 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -444,10 +444,6 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 
 	mlog_entry("ino=%lu type=%u", (unsigned long)lqinode->i_ino, type);
 
-	status = ocfs2_lock_global_qf(oinfo, 1);
-	if (status < 0)
-		goto out;
-
 	list_for_each_entry_safe(rchunk, next, &(rec->r_list[type]), rc_list) {
 		chunk = rchunk->rc_chunk;
 		hbh = NULL;
@@ -480,12 +476,18 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 				     type);
 				goto out_put_bh;
 			}
+			status = ocfs2_lock_global_qf(oinfo, 1);
+			if (status < 0) {
+				mlog_errno(status);
+				goto out_put_dquot;
+			}
+
 			handle = ocfs2_start_trans(OCFS2_SB(sb),
 						   OCFS2_QSYNC_CREDITS);
 			if (IS_ERR(handle)) {
 				status = PTR_ERR(handle);
 				mlog_errno(status);
-				goto out_put_dquot;
+				goto out_drop_lock;
 			}
 			mutex_lock(&sb_dqopt(sb)->dqio_mutex);
 			spin_lock(&dq_data_lock);
@@ -523,6 +525,8 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 out_commit:
 			mutex_unlock(&sb_dqopt(sb)->dqio_mutex);
 			ocfs2_commit_trans(OCFS2_SB(sb), handle);
+out_drop_lock:
+			ocfs2_unlock_global_qf(oinfo, 1);
 out_put_dquot:
 			dqput(dquot);
 out_put_bh:
@@ -537,8 +541,6 @@ out_put_bh:
 		if (status < 0)
 			break;
 	}
-	ocfs2_unlock_global_qf(oinfo, 1);
-out:
 	if (status < 0)
 		free_recovery_list(&(rec->r_list[type]));
 	mlog_exit(status);
@@ -655,6 +657,9 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 	struct ocfs2_quota_recovery *rec;
 	int locked = 0;
 
+	/* We don't need the lock and we have to acquire quota file locks
+	 * which will later depend on this lock */
+	mutex_unlock(&sb_dqopt(sb)->dqio_mutex);
 	info->dqi_maxblimit = 0x7fffffffffffffffLL;
 	info->dqi_maxilimit = 0x7fffffffffffffffLL;
 	oinfo = kmalloc(sizeof(struct ocfs2_mem_dqinfo), GFP_NOFS);
@@ -733,6 +738,7 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 		goto out_err;
 	}
 
+	mutex_lock(&sb_dqopt(sb)->dqio_mutex);
 	return 0;
 out_err:
 	if (oinfo) {
@@ -746,6 +752,7 @@ out_err:
 		kfree(oinfo);
 	}
 	brelse(bh);
+	mutex_lock(&sb_dqopt(sb)->dqio_mutex);
 	return -1;
 }
 
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 5c6163f5503..d33767f17ba 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -42,6 +42,7 @@
 #include <linux/mount.h>
 #include <linux/seq_file.h>
 #include <linux/quotaops.h>
+#include <linux/smp_lock.h>
 
 #define MLOG_MASK_PREFIX ML_SUPER
 #include <cluster/masklog.h>
@@ -118,15 +119,16 @@ static void ocfs2_release_system_inodes(struct ocfs2_super *osb);
 static int ocfs2_check_volume(struct ocfs2_super *osb);
 static int ocfs2_verify_volume(struct ocfs2_dinode *di,
 			       struct buffer_head *bh,
-			       u32 sectsize);
+			       u32 sectsize,
+			       struct ocfs2_blockcheck_stats *stats);
 static int ocfs2_initialize_super(struct super_block *sb,
 				  struct buffer_head *bh,
-				  int sector_size);
+				  int sector_size,
+				  struct ocfs2_blockcheck_stats *stats);
 static int ocfs2_get_sector(struct super_block *sb,
 			    struct buffer_head **bh,
 			    int block,
 			    int sect_size);
-static void ocfs2_write_super(struct super_block *sb);
 static struct inode *ocfs2_alloc_inode(struct super_block *sb);
 static void ocfs2_destroy_inode(struct inode *inode);
 static int ocfs2_susp_quotas(struct ocfs2_super *osb, int unsuspend);
@@ -141,7 +143,6 @@ static const struct super_operations ocfs2_sops = {
 	.clear_inode	= ocfs2_clear_inode,
 	.delete_inode	= ocfs2_delete_inode,
 	.sync_fs	= ocfs2_sync_fs,
-	.write_super	= ocfs2_write_super,
 	.put_super	= ocfs2_put_super,
 	.remount_fs	= ocfs2_remount,
 	.show_options   = ocfs2_show_options,
@@ -208,6 +209,7 @@ static int ocfs2_osb_dump(struct ocfs2_super *osb, char *buf, int len)
 	int i;
 	struct ocfs2_cluster_connection *cconn = osb->cconn;
 	struct ocfs2_recovery_map *rm = osb->recovery_map;
+	struct ocfs2_orphan_scan *os;
 
 	out += snprintf(buf + out, len - out,
 			"%10s => Id: %-s  Uuid: %-s  Gen: 0x%X  Label: %-s\n",
@@ -309,6 +311,13 @@ static int ocfs2_osb_dump(struct ocfs2_super *osb, char *buf, int len)
 				i, osb->slot_recovery_generations[i]);
 	}
 
+	os = &osb->osb_orphan_scan;
+	out += snprintf(buf + out, len - out, "Orphan Scan=> ");
+	out += snprintf(buf + out, len - out, "Local: %u  Global: %u ",
+			os->os_count, os->os_seqno);
+	out += snprintf(buf + out, len - out, " Last Scan: %lu seconds ago\n",
+			(get_seconds() - os->os_scantime.tv_sec));
+
 	return out;
 }
 
@@ -365,24 +374,12 @@ static struct file_operations ocfs2_osb_debug_fops = {
 	.llseek =	generic_file_llseek,
 };
 
-/*
- * write_super and sync_fs ripped right out of ext3.
- */
-static void ocfs2_write_super(struct super_block *sb)
-{
-	if (mutex_trylock(&sb->s_lock) != 0)
-		BUG();
-	sb->s_dirt = 0;
-}
-
 static int ocfs2_sync_fs(struct super_block *sb, int wait)
 {
 	int status;
 	tid_t target;
 	struct ocfs2_super *osb = OCFS2_SB(sb);
 
-	sb->s_dirt = 0;
-
 	if (ocfs2_is_hard_readonly(osb))
 		return -EROFS;
 
@@ -595,6 +592,8 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data)
 	struct mount_options parsed_options;
 	struct ocfs2_super *osb = OCFS2_SB(sb);
 
+	lock_kernel();
+
 	if (!ocfs2_parse_options(sb, data, &parsed_options, 1)) {
 		ret = -EINVAL;
 		goto out;
@@ -698,12 +697,14 @@ unlock_osb:
 			ocfs2_set_journal_params(osb);
 	}
 out:
+	unlock_kernel();
 	return ret;
 }
 
 static int ocfs2_sb_probe(struct super_block *sb,
 			  struct buffer_head **bh,
-			  int *sector_size)
+			  int *sector_size,
+			  struct ocfs2_blockcheck_stats *stats)
 {
 	int status, tmpstat;
 	struct ocfs1_vol_disk_hdr *hdr;
@@ -769,7 +770,8 @@ static int ocfs2_sb_probe(struct super_block *sb,
 			goto bail;
 		}
 		di = (struct ocfs2_dinode *) (*bh)->b_data;
-		status = ocfs2_verify_volume(di, *bh, blksize);
+		memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
+		status = ocfs2_verify_volume(di, *bh, blksize, stats);
 		if (status >= 0)
 			goto bail;
 		brelse(*bh);
@@ -975,6 +977,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	struct ocfs2_super *osb = NULL;
 	struct buffer_head *bh = NULL;
 	char nodestr[8];
+	struct ocfs2_blockcheck_stats stats;
 
 	mlog_entry("%p, %p, %i", sb, data, silent);
 
@@ -984,13 +987,13 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	/* probe for superblock */
-	status = ocfs2_sb_probe(sb, &bh, &sector_size);
+	status = ocfs2_sb_probe(sb, &bh, &sector_size, &stats);
 	if (status < 0) {
 		mlog(ML_ERROR, "superblock probe failed!\n");
 		goto read_super_error;
 	}
 
-	status = ocfs2_initialize_super(sb, bh, sector_size);
+	status = ocfs2_initialize_super(sb, bh, sector_size, &stats);
 	osb = OCFS2_SB(sb);
 	if (status < 0) {
 		mlog_errno(status);
@@ -1100,6 +1103,18 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 		goto read_super_error;
 	}
 
+	if (ocfs2_meta_ecc(osb)) {
+		status = ocfs2_blockcheck_stats_debugfs_install(
+						&osb->osb_ecc_stats,
+						osb->osb_debug_root);
+		if (status) {
+			mlog(ML_ERROR,
+			     "Unable to create blockcheck statistics "
+			     "files\n");
+			goto read_super_error;
+		}
+	}
+
 	status = ocfs2_mount_volume(sb);
 	if (osb->root_inode)
 		inode = igrab(osb->root_inode);
@@ -1550,9 +1565,13 @@ static void ocfs2_put_super(struct super_block *sb)
 {
 	mlog_entry("(0x%p)\n", sb);
 
+	lock_kernel();
+
 	ocfs2_sync_blockdev(sb);
 	ocfs2_dismount_volume(sb, 0);
 
+	unlock_kernel();
+
 	mlog_exit_void();
 }
 
@@ -1766,13 +1785,8 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	}
 
 	status = ocfs2_truncate_log_init(osb);
-	if (status < 0) {
+	if (status < 0)
 		mlog_errno(status);
-		goto leave;
-	}
-
-	if (ocfs2_mount_local(osb))
-		goto leave;
 
 leave:
 	if (unlock_super)
@@ -1802,6 +1816,8 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err)
 
 	ocfs2_truncate_log_shutdown(osb);
 
+	ocfs2_orphan_scan_stop(osb);
+
 	/* This will disable recovery and flush any recovery work. */
 	ocfs2_recovery_exit(osb);
 
@@ -1839,6 +1855,7 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err)
 	if (osb->cconn)
 		ocfs2_dlm_shutdown(osb, hangup_needed);
 
+	ocfs2_blockcheck_stats_debugfs_remove(&osb->osb_ecc_stats);
 	debugfs_remove(osb->osb_debug_root);
 
 	if (hangup_needed)
@@ -1886,7 +1903,8 @@ static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uu
 
 static int ocfs2_initialize_super(struct super_block *sb,
 				  struct buffer_head *bh,
-				  int sector_size)
+				  int sector_size,
+				  struct ocfs2_blockcheck_stats *stats)
 {
 	int status;
 	int i, cbits, bbits;
@@ -1945,6 +1963,9 @@ static int ocfs2_initialize_super(struct super_block *sb,
 	atomic_set(&osb->alloc_stats.bg_allocs, 0);
 	atomic_set(&osb->alloc_stats.bg_extends, 0);
 
+	/* Copy the blockcheck stats from the superblock probe */
+	osb->osb_ecc_stats = *stats;
+
 	ocfs2_init_node_maps(osb);
 
 	snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
@@ -1957,6 +1978,13 @@ static int ocfs2_initialize_super(struct super_block *sb,
 		goto bail;
 	}
 
+	status = ocfs2_orphan_scan_init(osb);
+	if (status) {
+		mlog(ML_ERROR, "Unable to initialize delayed orphan scan\n");
+		mlog_errno(status);
+		goto bail;
+	}
+
 	init_waitqueue_head(&osb->checkpoint_event);
 	atomic_set(&osb->needs_checkpoint, 0);
 
@@ -2175,7 +2203,8 @@ bail:
  */
 static int ocfs2_verify_volume(struct ocfs2_dinode *di,
 			       struct buffer_head *bh,
-			       u32 blksz)
+			       u32 blksz,
+			       struct ocfs2_blockcheck_stats *stats)
 {
 	int status = -EAGAIN;
 
@@ -2188,7 +2217,8 @@ static int ocfs2_verify_volume(struct ocfs2_dinode *di,
 		    OCFS2_FEATURE_INCOMPAT_META_ECC) {
 			status = ocfs2_block_check_validate(bh->b_data,
 							    bh->b_size,
-							    &di->i_check);
+							    &di->i_check,
+							    stats);
 			if (status)
 				goto out;
 		}
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 15631019dc6..ba320e25074 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -3154,7 +3154,7 @@ static int ocfs2_iterate_xattr_buckets(struct inode *inode,
 		     le32_to_cpu(bucket_xh(bucket)->xh_entries[0].xe_name_hash));
 		if (func) {
 			ret = func(inode, bucket, para);
-			if (ret)
+			if (ret && ret != -ERANGE)
 				mlog_errno(ret);
 			/* Fall through to bucket_relse() */
 		}
@@ -3261,7 +3261,8 @@ static int ocfs2_xattr_tree_list_index_block(struct inode *inode,
 						  ocfs2_list_xattr_bucket,
 						  &xl);
 		if (ret) {
-			mlog_errno(ret);
+			if (ret != -ERANGE)
+				mlog_errno(ret);
 			goto out;
 		}
 
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 834b2331f6b..d17e774eaf4 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -11,21 +11,6 @@
 #include <linux/mpage.h>
 #include "omfs.h"
 
-static int omfs_sync_file(struct file *file, struct dentry *dentry,
-		int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-	err |= omfs_sync_inode(inode);
-	return err ? -EIO : 0;
-}
-
 static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset)
 {
 	return (sbi->s_sys_blocksize - offset -
@@ -344,7 +329,7 @@ struct file_operations omfs_file_operations = {
 	.aio_read = generic_file_aio_read,
 	.aio_write = generic_file_aio_write,
 	.mmap = generic_file_mmap,
-	.fsync = omfs_sync_file,
+	.fsync = simple_fsync,
 	.splice_read = generic_file_splice_read,
 };
 
diff --git a/fs/open.c b/fs/open.c
index bdfbf03615a..7200e23d925 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -612,7 +612,7 @@ SYSCALL_DEFINE2(fchmod, unsigned int, fd, mode_t, mode)
 
 	audit_inode(NULL, dentry);
 
-	err = mnt_want_write(file->f_path.mnt);
+	err = mnt_want_write_file(file);
 	if (err)
 		goto out_putf;
 	mutex_lock(&inode->i_mutex);
@@ -761,7 +761,7 @@ SYSCALL_DEFINE3(fchown, unsigned int, fd, uid_t, user, gid_t, group)
 	if (!file)
 		goto out;
 
-	error = mnt_want_write(file->f_path.mnt);
+	error = mnt_want_write_file(file);
 	if (error)
 		goto out_fput;
 	dentry = file->f_path.dentry;
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 0af36085eb2..1a9c7878f86 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -556,27 +556,49 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 
 	/* add partitions */
 	for (p = 1; p < state->limit; p++) {
-		sector_t size = state->parts[p].size;
-		sector_t from = state->parts[p].from;
+		sector_t size, from;
+try_scan:
+		size = state->parts[p].size;
 		if (!size)
 			continue;
+
+		from = state->parts[p].from;
 		if (from >= get_capacity(disk)) {
 			printk(KERN_WARNING
 			       "%s: p%d ignored, start %llu is behind the end of the disk\n",
 			       disk->disk_name, p, (unsigned long long) from);
 			continue;
 		}
+
 		if (from + size > get_capacity(disk)) {
-			/*
-			 * we can not ignore partitions of broken tables
-			 * created by for example camera firmware, but we
-			 * limit them to the end of the disk to avoid
-			 * creating invalid block devices
-			 */
+			struct block_device_operations *bdops = disk->fops;
+			unsigned long long capacity;
+
 			printk(KERN_WARNING
-			       "%s: p%d size %llu limited to end of disk\n",
+			       "%s: p%d size %llu exceeds device capacity, ",
 			       disk->disk_name, p, (unsigned long long) size);
-			size = get_capacity(disk) - from;
+
+			if (bdops->set_capacity &&
+			    (disk->flags & GENHD_FL_NATIVE_CAPACITY) == 0) {
+				printk(KERN_CONT "enabling native capacity\n");
+				capacity = bdops->set_capacity(disk, ~0ULL);
+				disk->flags |= GENHD_FL_NATIVE_CAPACITY;
+				if (capacity > get_capacity(disk)) {
+					set_capacity(disk, capacity);
+					check_disk_size_change(disk, bdev);
+					bdev->bd_invalidated = 0;
+				}
+				goto try_scan;
+			} else {
+				/*
+				 * we can not ignore partitions of broken tables
+				 * created by for example camera firmware, but
+				 * we limit them to the end of the disk to avoid
+				 * creating invalid block devices
+				 */
+				printk(KERN_CONT "limited to end of disk\n");
+				size = get_capacity(disk) - from;
+			}
 		}
 		part = add_partition(disk, p, from, size,
 				     state->parts[p].flags);
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index f6db9618a88..753ca37002c 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -92,3 +92,28 @@ struct pde_opener {
 	struct list_head lh;
 };
 void pde_users_dec(struct proc_dir_entry *pde);
+
+extern spinlock_t proc_subdir_lock;
+
+struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
+int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
+unsigned long task_vsize(struct mm_struct *);
+int task_statm(struct mm_struct *, int *, int *, int *, int *);
+void task_mem(struct seq_file *, struct mm_struct *);
+
+struct proc_dir_entry *de_get(struct proc_dir_entry *de);
+void de_put(struct proc_dir_entry *de);
+
+extern struct vfsmount *proc_mnt;
+int proc_fill_super(struct super_block *);
+struct inode *proc_get_inode(struct super_block *, unsigned int, struct proc_dir_entry *);
+
+/*
+ * These are generic /proc routines that use the internal
+ * "struct proc_dir_entry" tree to traverse the filesystem.
+ *
+ * The /proc root directory has extended versions to take care
+ * of the /proc/<pid> subdirectories.
+ */
+int proc_readdir(struct file *, void *, filldir_t);
+struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index de2bba5a344..fc6c3025bef 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -11,6 +11,7 @@
 #include <linux/string.h>
 #include <asm/prom.h>
 #include <asm/uaccess.h>
+#include "internal.h"
 
 #ifndef HAVE_ARCH_DEVTREE_FIXUPS
 static inline void set_node_proc_entry(struct device_node *np,
diff --git a/fs/qnx4/Makefile b/fs/qnx4/Makefile
index 502d7fe98ba..e4d408cc547 100644
--- a/fs/qnx4/Makefile
+++ b/fs/qnx4/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_QNX4FS_FS) += qnx4.o
 
-qnx4-objs := inode.o dir.o namei.o file.o bitmap.o truncate.o fsync.o
+qnx4-objs := inode.o dir.o namei.o file.o bitmap.o truncate.o
diff --git a/fs/qnx4/bitmap.c b/fs/qnx4/bitmap.c
index 8425cf6e962..e1cd061a25f 100644
--- a/fs/qnx4/bitmap.c
+++ b/fs/qnx4/bitmap.c
@@ -13,14 +13,9 @@
  * 28-06-1998 by Frank Denis : qnx4_free_inode (to be fixed) .
  */
 
-#include <linux/time.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-#include <linux/stat.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
 #include <linux/buffer_head.h>
 #include <linux/bitops.h>
+#include "qnx4.h"
 
 #if 0
 int qnx4_new_block(struct super_block *sb)
diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index ea9ffefb48a..003c68f3238 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -11,14 +11,9 @@
  * 20-06-1998 by Frank Denis : Linux 2.1.99+ & dcache support.
  */
 
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-#include <linux/stat.h>
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
-
+#include "qnx4.h"
 
 static int qnx4_readdir(struct file *filp, void *dirent, filldir_t filldir)
 {
@@ -84,7 +79,7 @@ const struct file_operations qnx4_dir_operations =
 {
 	.read		= generic_read_dir,
 	.readdir	= qnx4_readdir,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 };
 
 const struct inode_operations qnx4_dir_inode_operations =
diff --git a/fs/qnx4/file.c b/fs/qnx4/file.c
index 867f42b0203..09b170ac936 100644
--- a/fs/qnx4/file.c
+++ b/fs/qnx4/file.c
@@ -12,8 +12,7 @@
  * 27-06-1998 by Frank Denis : file overwriting.
  */
 
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
+#include "qnx4.h"
 
 /*
  * We have mostly NULL's here: the current defaults are ok for
@@ -29,7 +28,7 @@ const struct file_operations qnx4_file_operations =
 #ifdef CONFIG_QNX4FS_RW
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
-	.fsync		= qnx4_sync_file,
+	.fsync		= simple_fsync,
 #endif
 };
 
diff --git a/fs/qnx4/fsync.c b/fs/qnx4/fsync.c
deleted file mode 100644
index aa3b19544be..00000000000
--- a/fs/qnx4/fsync.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/* 
- * QNX4 file system, Linux implementation.
- * 
- * Version : 0.1
- * 
- * Using parts of the xiafs filesystem.
- * 
- * History :
- * 
- * 24-03-1998 by Richard Frowijn : first release.
- */
-
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/stat.h>
-#include <linux/fcntl.h>
-#include <linux/smp_lock.h>
-#include <linux/buffer_head.h>
-
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-
-#include <asm/system.h>
-
-/*
- * The functions for qnx4 fs file synchronization.
- */
-
-#ifdef CONFIG_QNX4FS_RW
-
-static int sync_block(struct inode *inode, unsigned short *block, int wait)
-{
-	struct buffer_head *bh;
-	unsigned short tmp;
-
-	if (!*block)
-		return 0;
-	tmp = *block;
-	bh = sb_find_get_block(inode->i_sb, *block);
-	if (!bh)
-		return 0;
-	if (*block != tmp) {
-		brelse(bh);
-		return 1;
-	}
-	if (wait && buffer_req(bh) && !buffer_uptodate(bh)) {
-		brelse(bh);
-		return -1;
-	}
-	if (wait || !buffer_uptodate(bh) || !buffer_dirty(bh)) {
-		brelse(bh);
-		return 0;
-	}
-	ll_rw_block(WRITE, 1, &bh);
-	atomic_dec(&bh->b_count);
-	return 0;
-}
-
-#ifdef WTF
-static int sync_iblock(struct inode *inode, unsigned short *iblock,
-		       struct buffer_head **bh, int wait)
-{
-	int rc;
-	unsigned short tmp;
-
-	*bh = NULL;
-	tmp = *iblock;
-	if (!tmp)
-		return 0;
-	rc = sync_block(inode, iblock, wait);
-	if (rc)
-		return rc;
-	*bh = sb_bread(inode->i_sb, tmp);
-	if (tmp != *iblock) {
-		brelse(*bh);
-		*bh = NULL;
-		return 1;
-	}
-	if (!*bh)
-		return -1;
-	return 0;
-}
-#endif
-
-static int sync_direct(struct inode *inode, int wait)
-{
-	int i;
-	int rc, err = 0;
-
-	for (i = 0; i < 7; i++) {
-		rc = sync_block(inode,
-				(unsigned short *) qnx4_raw_inode(inode)->di_first_xtnt.xtnt_blk + i, wait);
-		if (rc > 0)
-			break;
-		if (rc)
-			err = rc;
-	}
-	return err;
-}
-
-#ifdef WTF
-static int sync_indirect(struct inode *inode, unsigned short *iblock, int wait)
-{
-	int i;
-	struct buffer_head *ind_bh;
-	int rc, err = 0;
-
-	rc = sync_iblock(inode, iblock, &ind_bh, wait);
-	if (rc || !ind_bh)
-		return rc;
-
-	for (i = 0; i < 512; i++) {
-		rc = sync_block(inode,
-				((unsigned short *) ind_bh->b_data) + i,
-				wait);
-		if (rc > 0)
-			break;
-		if (rc)
-			err = rc;
-	}
-	brelse(ind_bh);
-	return err;
-}
-
-static int sync_dindirect(struct inode *inode, unsigned short *diblock,
-			  int wait)
-{
-	int i;
-	struct buffer_head *dind_bh;
-	int rc, err = 0;
-
-	rc = sync_iblock(inode, diblock, &dind_bh, wait);
-	if (rc || !dind_bh)
-		return rc;
-
-	for (i = 0; i < 512; i++) {
-		rc = sync_indirect(inode,
-				((unsigned short *) dind_bh->b_data) + i,
-				   wait);
-		if (rc > 0)
-			break;
-		if (rc)
-			err = rc;
-	}
-	brelse(dind_bh);
-	return err;
-}
-#endif
-
-int qnx4_sync_file(struct file *file, struct dentry *dentry, int unused)
-{
-        struct inode *inode = dentry->d_inode;
-	int wait, err = 0;
-        
-        (void) file;
-	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
-	      S_ISLNK(inode->i_mode)))
-		return -EINVAL;
-
-	lock_kernel();
-	for (wait = 0; wait <= 1; wait++) {
-		err |= sync_direct(inode, wait);
-	}
-	err |= qnx4_sync_inode(inode);
-	unlock_kernel();
-	return (err < 0) ? -EIO : 0;
-}
-
-#endif
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index fe1f0f31d11..681df5fcd16 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -13,19 +13,15 @@
  */
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/highuid.h>
 #include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/buffer_head.h>
-#include <linux/vfs.h>
-#include <asm/uaccess.h>
+#include <linux/writeback.h>
+#include <linux/statfs.h>
+#include "qnx4.h"
 
 #define QNX4_VERSION  4
 #define QNX4_BMNAME   ".bitmap"
@@ -34,31 +30,6 @@ static const struct super_operations qnx4_sops;
 
 #ifdef CONFIG_QNX4FS_RW
 
-int qnx4_sync_inode(struct inode *inode)
-{
-	int err = 0;
-# if 0
-	struct buffer_head *bh;
-
-   	bh = qnx4_update_inode(inode);
-	if (bh && buffer_dirty(bh))
-	{
-		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh))
-		{
-			printk ("IO error syncing qnx4 inode [%s:%08lx]\n",
-				inode->i_sb->s_id, inode->i_ino);
-			err = -1;
-		}
-	        brelse (bh);
-	} else if (!bh) {
-		err = -1;
-	}
-# endif
-
-	return err;
-}
-
 static void qnx4_delete_inode(struct inode *inode)
 {
 	QNX4DEBUG(("qnx4: deleting inode [%lu]\n", (unsigned long) inode->i_ino));
@@ -70,15 +41,7 @@ static void qnx4_delete_inode(struct inode *inode)
 	unlock_kernel();
 }
 
-static void qnx4_write_super(struct super_block *sb)
-{
-	lock_kernel();
-	QNX4DEBUG(("qnx4: write_super\n"));
-	sb->s_dirt = 0;
-	unlock_kernel();
-}
-
-static int qnx4_write_inode(struct inode *inode, int unused)
+static int qnx4_write_inode(struct inode *inode, int do_sync)
 {
 	struct qnx4_inode_entry *raw_inode;
 	int block, ino;
@@ -115,6 +78,16 @@ static int qnx4_write_inode(struct inode *inode, int unused)
 	raw_inode->di_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
 	raw_inode->di_first_xtnt.xtnt_size = cpu_to_le32(inode->i_blocks);
 	mark_buffer_dirty(bh);
+	if (do_sync) {
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh)) {
+			printk("qnx4: IO error syncing inode [%s:%08x]\n",
+					inode->i_sb->s_id, ino);
+			brelse(bh);
+			unlock_kernel();
+			return -EIO;
+		}
+	}
 	brelse(bh);
 	unlock_kernel();
 	return 0;
@@ -138,7 +111,6 @@ static const struct super_operations qnx4_sops =
 #ifdef CONFIG_QNX4FS_RW
 	.write_inode	= qnx4_write_inode,
 	.delete_inode	= qnx4_delete_inode,
-	.write_super	= qnx4_write_super,
 #endif
 };
 
diff --git a/fs/qnx4/namei.c b/fs/qnx4/namei.c
index 775eed3a408..5972ed21493 100644
--- a/fs/qnx4/namei.c
+++ b/fs/qnx4/namei.c
@@ -12,16 +12,9 @@
  * 04-07-1998 by Frank Denis : first step for rmdir/unlink.
  */
 
-#include <linux/time.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/stat.h>
-#include <linux/fcntl.h>
-#include <linux/errno.h>
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
+#include "qnx4.h"
 
 
 /*
@@ -187,7 +180,7 @@ int qnx4_rmdir(struct inode *dir, struct dentry *dentry)
 	de->di_status = 0;
 	memset(de->di_fname, 0, sizeof de->di_fname);
 	de->di_mode = 0;
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	clear_nlink(inode);
 	mark_inode_dirty(inode);
 	inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
@@ -232,7 +225,7 @@ int qnx4_unlink(struct inode *dir, struct dentry *dentry)
 	de->di_status = 0;
 	memset(de->di_fname, 0, sizeof de->di_fname);
 	de->di_mode = 0;
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
 	mark_inode_dirty(dir);
 	inode->i_ctime = dir->i_ctime;
diff --git a/fs/qnx4/qnx4.h b/fs/qnx4/qnx4.h
new file mode 100644
index 00000000000..9efc089454f
--- /dev/null
+++ b/fs/qnx4/qnx4.h
@@ -0,0 +1,57 @@
+#include <linux/fs.h>
+#include <linux/qnx4_fs.h>
+
+#define QNX4_DEBUG 0
+
+#if QNX4_DEBUG
+#define QNX4DEBUG(X) printk X
+#else
+#define QNX4DEBUG(X) (void) 0
+#endif
+
+struct qnx4_sb_info {
+	struct buffer_head	*sb_buf;	/* superblock buffer */
+	struct qnx4_super_block	*sb;		/* our superblock */
+	unsigned int		Version;	/* may be useful */
+	struct qnx4_inode_entry	*BitMap;	/* useful */
+};
+
+struct qnx4_inode_info {
+	struct qnx4_inode_entry raw;
+	loff_t mmu_private;
+	struct inode vfs_inode;
+};
+
+extern struct inode *qnx4_iget(struct super_block *, unsigned long);
+extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd);
+extern unsigned long qnx4_count_free_blocks(struct super_block *sb);
+extern unsigned long qnx4_block_map(struct inode *inode, long iblock);
+
+extern struct buffer_head *qnx4_bread(struct inode *, int, int);
+
+extern const struct inode_operations qnx4_file_inode_operations;
+extern const struct inode_operations qnx4_dir_inode_operations;
+extern const struct file_operations qnx4_file_operations;
+extern const struct file_operations qnx4_dir_operations;
+extern int qnx4_is_free(struct super_block *sb, long block);
+extern int qnx4_set_bitmap(struct super_block *sb, long block, int busy);
+extern int qnx4_create(struct inode *inode, struct dentry *dentry, int mode, struct nameidata *nd);
+extern void qnx4_truncate(struct inode *inode);
+extern void qnx4_free_inode(struct inode *inode);
+extern int qnx4_unlink(struct inode *dir, struct dentry *dentry);
+extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry);
+
+static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct qnx4_inode_info *qnx4_i(struct inode *inode)
+{
+	return container_of(inode, struct qnx4_inode_info, vfs_inode);
+}
+
+static inline struct qnx4_inode_entry *qnx4_raw_inode(struct inode *inode)
+{
+	return &qnx4_i(inode)->raw;
+}
diff --git a/fs/qnx4/truncate.c b/fs/qnx4/truncate.c
index 6437c1c3d1d..d94d9ee241f 100644
--- a/fs/qnx4/truncate.c
+++ b/fs/qnx4/truncate.c
@@ -10,12 +10,8 @@
  * 30-06-1998 by Frank DENIS : ugly filler.
  */
 
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
 #include <linux/smp_lock.h>
-#include <asm/uaccess.h>
+#include "qnx4.h"
 
 #ifdef CONFIG_QNX4FS_RW
 
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index b7f5a468f07..95c5b42384b 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -159,10 +159,14 @@ static int check_quotactl_valid(struct super_block *sb, int type, int cmd,
 	return error;
 }
 
-static void quota_sync_sb(struct super_block *sb, int type)
+#ifdef CONFIG_QUOTA
+void sync_quota_sb(struct super_block *sb, int type)
 {
 	int cnt;
 
+	if (!sb->s_qcop->quota_sync)
+		return;
+
 	sb->s_qcop->quota_sync(sb, type);
 
 	if (sb_dqopt(sb)->flags & DQUOT_QUOTA_SYS_FILE)
@@ -191,17 +195,13 @@ static void quota_sync_sb(struct super_block *sb, int type)
 	}
 	mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
 }
+#endif
 
-void sync_dquots(struct super_block *sb, int type)
+static void sync_dquots(int type)
 {
+	struct super_block *sb;
 	int cnt;
 
-	if (sb) {
-		if (sb->s_qcop->quota_sync)
-			quota_sync_sb(sb, type);
-		return;
-	}
-
 	spin_lock(&sb_lock);
 restart:
 	list_for_each_entry(sb, &super_blocks, s_list) {
@@ -222,8 +222,8 @@ restart:
 		sb->s_count++;
 		spin_unlock(&sb_lock);
 		down_read(&sb->s_umount);
-		if (sb->s_root && sb->s_qcop->quota_sync)
-			quota_sync_sb(sb, type);
+		if (sb->s_root)
+			sync_quota_sb(sb, type);
 		up_read(&sb->s_umount);
 		spin_lock(&sb_lock);
 		if (__put_super_and_need_restart(sb))
@@ -301,7 +301,10 @@ static int do_quotactl(struct super_block *sb, int type, int cmd, qid_t id,
 			return sb->s_qcop->set_dqblk(sb, type, id, &idq);
 		}
 		case Q_SYNC:
-			sync_dquots(sb, type);
+			if (sb)
+				sync_quota_sb(sb, type);
+			else
+				sync_dquots(type);
 			return 0;
 
 		case Q_XQUOTAON:
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index 3a6b193d844..0ff7566c767 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -202,9 +202,12 @@ static int ramfs_parse_options(char *data, struct ramfs_mount_opts *opts)
 				return -EINVAL;
 			opts->mode = option & S_IALLUGO;
 			break;
-		default:
-			printk(KERN_ERR "ramfs: bad mount option: %s\n", p);
-			return -EINVAL;
+		/*
+		 * We might like to report bad mount options here;
+		 * but traditionally ramfs has ignored all mount options,
+		 * and as it is used as a !CONFIG_SHMEM simple substitute
+		 * for tmpfs, better continue to ignore other mount options.
+		 */
 		}
 	}
 
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 45ee3d357c7..6d2668fdc38 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -44,13 +44,11 @@ static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
 static inline bool is_privroot_deh(struct dentry *dir,
 				   struct reiserfs_de_head *deh)
 {
-	int ret = 0;
-#ifdef CONFIG_REISERFS_FS_XATTR
 	struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
-	ret = (dir == dir->d_parent && privroot->d_inode &&
-	       deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
-#endif
-	return ret;
+	if (reiserfs_expose_privroot(dir->d_sb))
+		return 0;
+	return (dir == dir->d_parent && privroot->d_inode &&
+	        deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
 }
 
 int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 3567fb9e3fb..2969773cfc2 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -28,6 +28,7 @@
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/crc32.h>
+#include <linux/smp_lock.h>
 
 struct file_system_type reiserfs_fs_type;
 
@@ -64,18 +65,15 @@ static int reiserfs_statfs(struct dentry *dentry, struct kstatfs *buf);
 
 static int reiserfs_sync_fs(struct super_block *s, int wait)
 {
-	if (!(s->s_flags & MS_RDONLY)) {
-		struct reiserfs_transaction_handle th;
-		reiserfs_write_lock(s);
-		if (!journal_begin(&th, s, 1))
-			if (!journal_end_sync(&th, s, 1))
-				reiserfs_flush_old_commits(s);
-		s->s_dirt = 0;	/* Even if it's not true.
-				 * We'll loop forever in sync_supers otherwise */
-		reiserfs_write_unlock(s);
-	} else {
-		s->s_dirt = 0;
-	}
+	struct reiserfs_transaction_handle th;
+
+	reiserfs_write_lock(s);
+	if (!journal_begin(&th, s, 1))
+		if (!journal_end_sync(&th, s, 1))
+			reiserfs_flush_old_commits(s);
+	s->s_dirt = 0;	/* Even if it's not true.
+			 * We'll loop forever in sync_supers otherwise */
+	reiserfs_write_unlock(s);
 	return 0;
 }
 
@@ -468,6 +466,11 @@ static void reiserfs_put_super(struct super_block *s)
 	struct reiserfs_transaction_handle th;
 	th.t_trans_id = 0;
 
+	lock_kernel();
+
+	if (s->s_dirt)
+		reiserfs_write_super(s);
+
 	/* change file system state to current state if it was mounted with read-write permissions */
 	if (!(s->s_flags & MS_RDONLY)) {
 		if (!journal_begin(&th, s, 10)) {
@@ -500,7 +503,7 @@ static void reiserfs_put_super(struct super_block *s)
 	kfree(s->s_fs_info);
 	s->s_fs_info = NULL;
 
-	return;
+	unlock_kernel();
 }
 
 static struct kmem_cache *reiserfs_inode_cachep;
@@ -898,6 +901,7 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 		{"conv",.setmask = 1 << REISERFS_CONVERT},
 		{"attrs",.setmask = 1 << REISERFS_ATTRS},
 		{"noattrs",.clrmask = 1 << REISERFS_ATTRS},
+		{"expose_privroot", .setmask = 1 << REISERFS_EXPOSE_PRIVROOT},
 #ifdef CONFIG_REISERFS_FS_XATTR
 		{"user_xattr",.setmask = 1 << REISERFS_XATTRS_USER},
 		{"nouser_xattr",.clrmask = 1 << REISERFS_XATTRS_USER},
@@ -1193,6 +1197,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 	memcpy(qf_names, REISERFS_SB(s)->s_qf_names, sizeof(qf_names));
 #endif
 
+	lock_kernel();
 	rs = SB_DISK_SUPER_BLOCK(s);
 
 	if (!reiserfs_parse_options
@@ -1315,10 +1320,12 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 
 out_ok:
 	replace_mount_options(s, new_opts);
+	unlock_kernel();
 	return 0;
 
 out_err:
 	kfree(new_opts);
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 8e7deb0e696..f3d47d85684 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -981,7 +981,8 @@ int reiserfs_lookup_privroot(struct super_block *s)
 				strlen(PRIVROOT_NAME));
 	if (!IS_ERR(dentry)) {
 		REISERFS_SB(s)->priv_root = dentry;
-		s->s_root->d_op = &xattr_lookup_poison_ops;
+		if (!reiserfs_expose_privroot(s))
+			s->s_root->d_op = &xattr_lookup_poison_ops;
 		if (dentry->d_inode)
 			dentry->d_inode->i_flags |= S_PRIVATE;
 	} else
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index fc27fbfc539..1402d2d54f5 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -474,6 +474,8 @@ smb_put_super(struct super_block *sb)
 {
 	struct smb_sb_info *server = SMB_SB(sb);
 
+	lock_kernel();
+
 	smb_lock_server(server);
 	server->state = CONN_INVALID;
 	smbiod_unregister_server(server);
@@ -489,6 +491,8 @@ smb_put_super(struct super_block *sb)
 	smb_unlock_server(server);
 	put_pid(server->conn_pid);
 	kfree(server);
+
+	unlock_kernel();
 }
 
 static int smb_fill_super(struct super_block *sb, void *raw_data, int silent)
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 0adc624c956..3b52770f46f 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -338,6 +338,8 @@ static int squashfs_remount(struct super_block *sb, int *flags, char *data)
 
 static void squashfs_put_super(struct super_block *sb)
 {
+	lock_kernel();
+
 	if (sb->s_fs_info) {
 		struct squashfs_sb_info *sbi = sb->s_fs_info;
 		squashfs_cache_delete(sbi->block_cache);
@@ -350,6 +352,8 @@ static void squashfs_put_super(struct super_block *sb)
 		kfree(sb->s_fs_info);
 		sb->s_fs_info = NULL;
 	}
+
+	unlock_kernel();
 }
 
 
diff --git a/fs/super.c b/fs/super.c
index 1943fdf655f..83b47416d00 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -28,7 +28,6 @@
 #include <linux/blkdev.h>
 #include <linux/quotaops.h>
 #include <linux/namei.h>
-#include <linux/buffer_head.h>		/* for fsync_super() */
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
@@ -38,7 +37,6 @@
 #include <linux/kobject.h>
 #include <linux/mutex.h>
 #include <linux/file.h>
-#include <linux/async.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
@@ -72,7 +70,6 @@ static struct super_block *alloc_super(struct file_system_type *type)
 		INIT_HLIST_HEAD(&s->s_anon);
 		INIT_LIST_HEAD(&s->s_inodes);
 		INIT_LIST_HEAD(&s->s_dentry_lru);
-		INIT_LIST_HEAD(&s->s_async_list);
 		init_rwsem(&s->s_umount);
 		mutex_init(&s->s_lock);
 		lockdep_set_class(&s->s_umount, &type->s_umount_key);
@@ -285,38 +282,6 @@ void unlock_super(struct super_block * sb)
 EXPORT_SYMBOL(lock_super);
 EXPORT_SYMBOL(unlock_super);
 
-/*
- * Write out and wait upon all dirty data associated with this
- * superblock.  Filesystem data as well as the underlying block
- * device.  Takes the superblock lock.  Requires a second blkdev
- * flush by the caller to complete the operation.
- */
-void __fsync_super(struct super_block *sb)
-{
-	sync_inodes_sb(sb, 0);
-	vfs_dq_sync(sb);
-	lock_super(sb);
-	if (sb->s_dirt && sb->s_op->write_super)
-		sb->s_op->write_super(sb);
-	unlock_super(sb);
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
-	sync_blockdev(sb->s_bdev);
-	sync_inodes_sb(sb, 1);
-}
-
-/*
- * Write out and wait upon all dirty data associated with this
- * superblock.  Filesystem data as well as the underlying block
- * device.  Takes the superblock lock.
- */
-int fsync_super(struct super_block *sb)
-{
-	__fsync_super(sb);
-	return sync_blockdev(sb->s_bdev);
-}
-EXPORT_SYMBOL_GPL(fsync_super);
-
 /**
  *	generic_shutdown_super	-	common helper for ->kill_sb()
  *	@sb: superblock to kill
@@ -338,21 +303,13 @@ void generic_shutdown_super(struct super_block *sb)
 
 	if (sb->s_root) {
 		shrink_dcache_for_umount(sb);
-		fsync_super(sb);
-		lock_super(sb);
+		sync_filesystem(sb);
+		get_fs_excl();
 		sb->s_flags &= ~MS_ACTIVE;
 
-		/*
-		 * wait for asynchronous fs operations to finish before going further
-		 */
-		async_synchronize_full_domain(&sb->s_async_list);
-
 		/* bad name - it should be evict_inodes() */
 		invalidate_inodes(sb);
-		lock_kernel();
 
-		if (sop->write_super && sb->s_dirt)
-			sop->write_super(sb);
 		if (sop->put_super)
 			sop->put_super(sb);
 
@@ -362,9 +319,7 @@ void generic_shutdown_super(struct super_block *sb)
 			   "Self-destruct in 5 seconds.  Have a nice day...\n",
 			   sb->s_id);
 		}
-
-		unlock_kernel();
-		unlock_super(sb);
+		put_fs_excl();
 	}
 	spin_lock(&sb_lock);
 	/* should be initialized for __put_super_and_need_restart() */
@@ -441,16 +396,14 @@ void drop_super(struct super_block *sb)
 
 EXPORT_SYMBOL(drop_super);
 
-static inline void write_super(struct super_block *sb)
-{
-	lock_super(sb);
-	if (sb->s_root && sb->s_dirt)
-		if (sb->s_op->write_super)
-			sb->s_op->write_super(sb);
-	unlock_super(sb);
-}
-
-/*
+/**
+ * sync_supers - helper for periodic superblock writeback
+ *
+ * Call the write_super method if present on all dirty superblocks in
+ * the system.  This is for the periodic writeback used by most older
+ * filesystems.  For data integrity superblock writeback use
+ * sync_filesystems() instead.
+ *
  * Note: check the dirty flag before waiting, so we don't
  * hold up the sync while mounting a device. (The newly
  * mounted device won't need syncing.)
@@ -462,12 +415,15 @@ void sync_supers(void)
 	spin_lock(&sb_lock);
 restart:
 	list_for_each_entry(sb, &super_blocks, s_list) {
-		if (sb->s_dirt) {
+		if (sb->s_op->write_super && sb->s_dirt) {
 			sb->s_count++;
 			spin_unlock(&sb_lock);
+
 			down_read(&sb->s_umount);
-			write_super(sb);
+			if (sb->s_root && sb->s_dirt)
+				sb->s_op->write_super(sb);
 			up_read(&sb->s_umount);
+
 			spin_lock(&sb_lock);
 			if (__put_super_and_need_restart(sb))
 				goto restart;
@@ -476,60 +432,6 @@ restart:
 	spin_unlock(&sb_lock);
 }
 
-/*
- * Call the ->sync_fs super_op against all filesystems which are r/w and
- * which implement it.
- *
- * This operation is careful to avoid the livelock which could easily happen
- * if two or more filesystems are being continuously dirtied.  s_need_sync_fs
- * is used only here.  We set it against all filesystems and then clear it as
- * we sync them.  So redirtied filesystems are skipped.
- *
- * But if process A is currently running sync_filesystems and then process B
- * calls sync_filesystems as well, process B will set all the s_need_sync_fs
- * flags again, which will cause process A to resync everything.  Fix that with
- * a local mutex.
- *
- * (Fabian) Avoid sync_fs with clean fs & wait mode 0
- */
-void sync_filesystems(int wait)
-{
-	struct super_block *sb;
-	static DEFINE_MUTEX(mutex);
-
-	mutex_lock(&mutex);		/* Could be down_interruptible */
-	spin_lock(&sb_lock);
-	list_for_each_entry(sb, &super_blocks, s_list) {
-		if (!sb->s_op->sync_fs)
-			continue;
-		if (sb->s_flags & MS_RDONLY)
-			continue;
-		sb->s_need_sync_fs = 1;
-	}
-
-restart:
-	list_for_each_entry(sb, &super_blocks, s_list) {
-		if (!sb->s_need_sync_fs)
-			continue;
-		sb->s_need_sync_fs = 0;
-		if (sb->s_flags & MS_RDONLY)
-			continue;	/* hm.  Was remounted r/o meanwhile */
-		sb->s_count++;
-		spin_unlock(&sb_lock);
-		down_read(&sb->s_umount);
-		async_synchronize_full_domain(&sb->s_async_list);
-		if (sb->s_root && (wait || sb->s_dirt))
-			sb->s_op->sync_fs(sb, wait);
-		up_read(&sb->s_umount);
-		/* restart only when sb is no longer on the list */
-		spin_lock(&sb_lock);
-		if (__put_super_and_need_restart(sb))
-			goto restart;
-	}
-	spin_unlock(&sb_lock);
-	mutex_unlock(&mutex);
-}
-
 /**
  *	get_super - get the superblock of a device
  *	@bdev: device to get the superblock for
@@ -616,45 +518,6 @@ out:
 }
 
 /**
- *	mark_files_ro - mark all files read-only
- *	@sb: superblock in question
- *
- *	All files are marked read-only.  We don't care about pending
- *	delete files so this should be used in 'force' mode only.
- */
-
-static void mark_files_ro(struct super_block *sb)
-{
-	struct file *f;
-
-retry:
-	file_list_lock();
-	list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
-		struct vfsmount *mnt;
-		if (!S_ISREG(f->f_path.dentry->d_inode->i_mode))
-		       continue;
-		if (!file_count(f))
-			continue;
-		if (!(f->f_mode & FMODE_WRITE))
-			continue;
-		f->f_mode &= ~FMODE_WRITE;
-		if (file_check_writeable(f) != 0)
-			continue;
-		file_release_write(f);
-		mnt = mntget(f->f_path.mnt);
-		file_list_unlock();
-		/*
-		 * This can sleep, so we can't hold
-		 * the file_list_lock() spinlock.
-		 */
-		mnt_drop_write(mnt);
-		mntput(mnt);
-		goto retry;
-	}
-	file_list_unlock();
-}
-
-/**
  *	do_remount_sb - asks filesystem to change mount options.
  *	@sb:	superblock in question
  *	@flags:	numeric part of options
@@ -675,27 +538,31 @@ int do_remount_sb(struct super_block *sb, int flags, void *data, int force)
 	if (flags & MS_RDONLY)
 		acct_auto_close(sb);
 	shrink_dcache_sb(sb);
-	fsync_super(sb);
+	sync_filesystem(sb);
 
 	/* If we are remounting RDONLY and current sb is read/write,
 	   make sure there are no rw files opened */
 	if ((flags & MS_RDONLY) && !(sb->s_flags & MS_RDONLY)) {
 		if (force)
 			mark_files_ro(sb);
-		else if (!fs_may_remount_ro(sb))
+		else if (!fs_may_remount_ro(sb)) {
+			unlock_kernel();
 			return -EBUSY;
+		}
 		retval = vfs_dq_off(sb, 1);
-		if (retval < 0 && retval != -ENOSYS)
+		if (retval < 0 && retval != -ENOSYS) {
+			unlock_kernel();
 			return -EBUSY;
+		}
 	}
 	remount_rw = !(flags & MS_RDONLY) && (sb->s_flags & MS_RDONLY);
 
 	if (sb->s_op->remount_fs) {
-		lock_super(sb);
 		retval = sb->s_op->remount_fs(sb, &flags, data);
-		unlock_super(sb);
-		if (retval)
+		if (retval) {
+			unlock_kernel();
 			return retval;
+		}
 	}
 	sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
 	if (remount_rw)
@@ -711,18 +578,17 @@ static void do_emergency_remount(struct work_struct *work)
 	list_for_each_entry(sb, &super_blocks, s_list) {
 		sb->s_count++;
 		spin_unlock(&sb_lock);
-		down_read(&sb->s_umount);
+		down_write(&sb->s_umount);
 		if (sb->s_root && sb->s_bdev && !(sb->s_flags & MS_RDONLY)) {
 			/*
 			 * ->remount_fs needs lock_kernel().
 			 *
 			 * What lock protects sb->s_flags??
 			 */
-			lock_kernel();
 			do_remount_sb(sb, MS_RDONLY, NULL, 1);
-			unlock_kernel();
 		}
-		drop_super(sb);
+		up_write(&sb->s_umount);
+		put_super(sb);
 		spin_lock(&sb_lock);
 	}
 	spin_unlock(&sb_lock);
diff --git a/fs/sync.c b/fs/sync.c
index 7abc65fbf21..dd200025af8 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -13,38 +13,123 @@
 #include <linux/pagemap.h>
 #include <linux/quotaops.h>
 #include <linux/buffer_head.h>
+#include "internal.h"
 
 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
 			SYNC_FILE_RANGE_WAIT_AFTER)
 
 /*
- * sync everything.  Start out by waking pdflush, because that writes back
- * all queues in parallel.
+ * Do the filesystem syncing work. For simple filesystems sync_inodes_sb(sb, 0)
+ * just dirties buffers with inodes so we have to submit IO for these buffers
+ * via __sync_blockdev(). This also speeds up the wait == 1 case since in that
+ * case write_inode() functions do sync_dirty_buffer() and thus effectively
+ * write one block at a time.
  */
-static void do_sync(unsigned long wait)
+static int __sync_filesystem(struct super_block *sb, int wait)
 {
-	wakeup_pdflush(0);
-	sync_inodes(0);		/* All mappings, inodes and their blockdevs */
-	vfs_dq_sync(NULL);
-	sync_supers();		/* Write the superblocks */
-	sync_filesystems(0);	/* Start syncing the filesystems */
-	sync_filesystems(wait);	/* Waitingly sync the filesystems */
-	sync_inodes(wait);	/* Mappings, inodes and blockdevs, again. */
+	/* Avoid doing twice syncing and cache pruning for quota sync */
 	if (!wait)
-		printk("Emergency Sync complete\n");
-	if (unlikely(laptop_mode))
-		laptop_sync_completion();
+		writeout_quota_sb(sb, -1);
+	else
+		sync_quota_sb(sb, -1);
+	sync_inodes_sb(sb, wait);
+	if (sb->s_op->sync_fs)
+		sb->s_op->sync_fs(sb, wait);
+	return __sync_blockdev(sb->s_bdev, wait);
+}
+
+/*
+ * Write out and wait upon all dirty data associated with this
+ * superblock.  Filesystem data as well as the underlying block
+ * device.  Takes the superblock lock.
+ */
+int sync_filesystem(struct super_block *sb)
+{
+	int ret;
+
+	/*
+	 * We need to be protected against the filesystem going from
+	 * r/o to r/w or vice versa.
+	 */
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+	/*
+	 * No point in syncing out anything if the filesystem is read-only.
+	 */
+	if (sb->s_flags & MS_RDONLY)
+		return 0;
+
+	ret = __sync_filesystem(sb, 0);
+	if (ret < 0)
+		return ret;
+	return __sync_filesystem(sb, 1);
+}
+EXPORT_SYMBOL_GPL(sync_filesystem);
+
+/*
+ * Sync all the data for all the filesystems (called by sys_sync() and
+ * emergency sync)
+ *
+ * This operation is careful to avoid the livelock which could easily happen
+ * if two or more filesystems are being continuously dirtied.  s_need_sync
+ * is used only here.  We set it against all filesystems and then clear it as
+ * we sync them.  So redirtied filesystems are skipped.
+ *
+ * But if process A is currently running sync_filesystems and then process B
+ * calls sync_filesystems as well, process B will set all the s_need_sync
+ * flags again, which will cause process A to resync everything.  Fix that with
+ * a local mutex.
+ */
+static void sync_filesystems(int wait)
+{
+	struct super_block *sb;
+	static DEFINE_MUTEX(mutex);
+
+	mutex_lock(&mutex);		/* Could be down_interruptible */
+	spin_lock(&sb_lock);
+	list_for_each_entry(sb, &super_blocks, s_list)
+		sb->s_need_sync = 1;
+
+restart:
+	list_for_each_entry(sb, &super_blocks, s_list) {
+		if (!sb->s_need_sync)
+			continue;
+		sb->s_need_sync = 0;
+		sb->s_count++;
+		spin_unlock(&sb_lock);
+
+		down_read(&sb->s_umount);
+		if (!(sb->s_flags & MS_RDONLY) && sb->s_root)
+			__sync_filesystem(sb, wait);
+		up_read(&sb->s_umount);
+
+		/* restart only when sb is no longer on the list */
+		spin_lock(&sb_lock);
+		if (__put_super_and_need_restart(sb))
+			goto restart;
+	}
+	spin_unlock(&sb_lock);
+	mutex_unlock(&mutex);
 }
 
 SYSCALL_DEFINE0(sync)
 {
-	do_sync(1);
+	sync_filesystems(0);
+	sync_filesystems(1);
+	if (unlikely(laptop_mode))
+		laptop_sync_completion();
 	return 0;
 }
 
 static void do_sync_work(struct work_struct *work)
 {
-	do_sync(0);
+	/*
+	 * Sync twice to reduce the possibility we skipped some inodes / pages
+	 * because they were temporarily locked
+	 */
+	sync_filesystems(0);
+	sync_filesystems(0);
+	printk("Emergency Sync complete\n");
 	kfree(work);
 }
 
@@ -75,10 +160,8 @@ int file_fsync(struct file *filp, struct dentry *dentry, int datasync)
 
 	/* sync the superblock to buffers */
 	sb = inode->i_sb;
-	lock_super(sb);
 	if (sb->s_dirt && sb->s_op->write_super)
 		sb->s_op->write_super(sb);
-	unlock_super(sb);
 
 	/* .. finally sync the buffers to disk */
 	err = sync_blockdev(sb->s_bdev);
diff --git a/fs/sysv/dir.c b/fs/sysv/dir.c
index 56f655254bf..c7798079e64 100644
--- a/fs/sysv/dir.c
+++ b/fs/sysv/dir.c
@@ -24,7 +24,7 @@ static int sysv_readdir(struct file *, void *, filldir_t);
 const struct file_operations sysv_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= sysv_readdir,
-	.fsync		= sysv_sync_file,
+	.fsync		= simple_fsync,
 };
 
 static inline void dir_put_page(struct page *page)
diff --git a/fs/sysv/file.c b/fs/sysv/file.c
index 589be21d884..96340c01f4a 100644
--- a/fs/sysv/file.c
+++ b/fs/sysv/file.c
@@ -26,7 +26,7 @@ const struct file_operations sysv_file_operations = {
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
 	.mmap		= generic_file_mmap,
-	.fsync		= sysv_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -34,18 +34,3 @@ const struct inode_operations sysv_file_inode_operations = {
 	.truncate	= sysv_truncate,
 	.getattr	= sysv_getattr,
 };
-
-int sysv_sync_file(struct file * file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-	
-	err |= sysv_sync_inode(inode);
-	return err ? -EIO : 0;
-}
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index da20b48d350..479923456a5 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -31,15 +31,13 @@
 #include <asm/byteorder.h>
 #include "sysv.h"
 
-/* This is only called on sync() and umount(), when s_dirt=1. */
-static void sysv_write_super(struct super_block *sb)
+static int sysv_sync_fs(struct super_block *sb, int wait)
 {
 	struct sysv_sb_info *sbi = SYSV_SB(sb);
 	unsigned long time = get_seconds(), old_time;
 
+	lock_super(sb);
 	lock_kernel();
-	if (sb->s_flags & MS_RDONLY)
-		goto clean;
 
 	/*
 	 * If we are going to write out the super block,
@@ -53,18 +51,30 @@ static void sysv_write_super(struct super_block *sb)
 		*sbi->s_sb_time = cpu_to_fs32(sbi, time);
 		mark_buffer_dirty(sbi->s_bh2);
 	}
-clean:
-	sb->s_dirt = 0;
+
 	unlock_kernel();
+	unlock_super(sb);
+
+	return 0;
+}
+
+static void sysv_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		sysv_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static int sysv_remount(struct super_block *sb, int *flags, char *data)
 {
 	struct sysv_sb_info *sbi = SYSV_SB(sb);
+	lock_super(sb);
 	if (sbi->s_forced_ro)
 		*flags |= MS_RDONLY;
 	if (!(*flags & MS_RDONLY))
 		sb->s_dirt = 1;
+	unlock_super(sb);
 	return 0;
 }
 
@@ -72,6 +82,11 @@ static void sysv_put_super(struct super_block *sb)
 {
 	struct sysv_sb_info *sbi = SYSV_SB(sb);
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		sysv_write_super(sb);
+
 	if (!(sb->s_flags & MS_RDONLY)) {
 		/* XXX ext2 also updates the state here */
 		mark_buffer_dirty(sbi->s_bh1);
@@ -84,6 +99,8 @@ static void sysv_put_super(struct super_block *sb)
 		brelse(sbi->s_bh2);
 
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 static int sysv_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -236,7 +253,7 @@ bad_inode:
 	return ERR_PTR(-EIO);
 }
 
-static struct buffer_head * sysv_update_inode(struct inode * inode)
+int sysv_write_inode(struct inode *inode, int wait)
 {
 	struct super_block * sb = inode->i_sb;
 	struct sysv_sb_info * sbi = SYSV_SB(sb);
@@ -244,19 +261,21 @@ static struct buffer_head * sysv_update_inode(struct inode * inode)
 	struct sysv_inode * raw_inode;
 	struct sysv_inode_info * si;
 	unsigned int ino, block;
+	int err = 0;
 
 	ino = inode->i_ino;
 	if (!ino || ino > sbi->s_ninodes) {
 		printk("Bad inode number on dev %s: %d is out of range\n",
 		       inode->i_sb->s_id, ino);
-		return NULL;
+		return -EIO;
 	}
 	raw_inode = sysv_raw_inode(sb, ino, &bh);
 	if (!raw_inode) {
 		printk("unable to read i-node block\n");
-		return NULL;
+		return -EIO;
 	}
 
+	lock_kernel();
 	raw_inode->i_mode = cpu_to_fs16(sbi, inode->i_mode);
 	raw_inode->i_uid = cpu_to_fs16(sbi, fs_high2lowuid(inode->i_uid));
 	raw_inode->i_gid = cpu_to_fs16(sbi, fs_high2lowgid(inode->i_gid));
@@ -272,38 +291,23 @@ static struct buffer_head * sysv_update_inode(struct inode * inode)
 	for (block = 0; block < 10+1+1+1; block++)
 		write3byte(sbi, (u8 *)&si->i_data[block],
 			&raw_inode->i_data[3*block]);
+	unlock_kernel();
 	mark_buffer_dirty(bh);
-	return bh;
-}
-
-int sysv_write_inode(struct inode * inode, int wait)
-{
-	struct buffer_head *bh;
-	lock_kernel();
-	bh = sysv_update_inode(inode);
+	if (wait) {
+                sync_dirty_buffer(bh);
+                if (buffer_req(bh) && !buffer_uptodate(bh)) {
+                        printk ("IO error syncing sysv inode [%s:%08x]\n",
+                                sb->s_id, ino);
+                        err = -EIO;
+                }
+        }
 	brelse(bh);
-	unlock_kernel();
 	return 0;
 }
 
-int sysv_sync_inode(struct inode * inode)
+int sysv_sync_inode(struct inode *inode)
 {
-        int err = 0;
-        struct buffer_head *bh;
-
-        bh = sysv_update_inode(inode);
-        if (bh && buffer_dirty(bh)) {
-                sync_dirty_buffer(bh);
-                if (buffer_req(bh) && !buffer_uptodate(bh)) {
-                        printk ("IO error syncing sysv inode [%s:%08lx]\n",
-                                inode->i_sb->s_id, inode->i_ino);
-                        err = -1;
-                }
-        }
-        else if (!bh)
-                err = -1;
-        brelse (bh);
-        return err;
+	return sysv_write_inode(inode, 1);
 }
 
 static void sysv_delete_inode(struct inode *inode)
@@ -347,6 +351,7 @@ const struct super_operations sysv_sops = {
 	.delete_inode	= sysv_delete_inode,
 	.put_super	= sysv_put_super,
 	.write_super	= sysv_write_super,
+	.sync_fs	= sysv_sync_fs,
 	.remount_fs	= sysv_remount,
 	.statfs		= sysv_statfs,
 };
diff --git a/fs/sysv/sysv.h b/fs/sysv/sysv.h
index 5784a318c88..53786eb5cf6 100644
--- a/fs/sysv/sysv.h
+++ b/fs/sysv/sysv.h
@@ -144,7 +144,6 @@ extern int __sysv_write_begin(struct file *file, struct address_space *mapping,
 extern struct inode *sysv_iget(struct super_block *, unsigned int);
 extern int sysv_write_inode(struct inode *, int);
 extern int sysv_sync_inode(struct inode *);
-extern int sysv_sync_file(struct file *, struct dentry *, int);
 extern void sysv_set_inode(struct inode *, dev_t);
 extern int sysv_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 extern int sysv_init_icache(void);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index e9f7a754c4f..3260b73abe2 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -36,6 +36,7 @@
 #include <linux/mount.h>
 #include <linux/math64.h>
 #include <linux/writeback.h>
+#include <linux/smp_lock.h>
 #include "ubifs.h"
 
 /*
@@ -447,9 +448,6 @@ static int ubifs_sync_fs(struct super_block *sb, int wait)
 	if (!wait)
 		return 0;
 
-	if (sb->s_flags & MS_RDONLY)
-		return 0;
-
 	/*
 	 * VFS calls '->sync_fs()' before synchronizing all dirty inodes and
 	 * pages, so synchronize them first, then commit the journal. Strictly
@@ -1687,6 +1685,9 @@ static void ubifs_put_super(struct super_block *sb)
 
 	ubifs_msg("un-mount UBI device %d, volume %d", c->vi.ubi_num,
 		  c->vi.vol_id);
+
+	lock_kernel();
+
 	/*
 	 * The following asserts are only valid if there has not been a failure
 	 * of the media. For example, there will be dirty inodes if we failed
@@ -1753,6 +1754,8 @@ static void ubifs_put_super(struct super_block *sb)
 	ubi_close_volume(c->ubi);
 	mutex_unlock(&c->umount_mutex);
 	kfree(c);
+
+	unlock_kernel();
 }
 
 static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
@@ -1768,17 +1771,22 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 		return err;
 	}
 
+	lock_kernel();
 	if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
 		if (c->ro_media) {
 			ubifs_msg("cannot re-mount due to prior errors");
+			unlock_kernel();
 			return -EROFS;
 		}
 		err = ubifs_remount_rw(c);
-		if (err)
+		if (err) {
+			unlock_kernel();
 			return err;
+		}
 	} else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) {
 		if (c->ro_media) {
 			ubifs_msg("cannot re-mount due to prior errors");
+			unlock_kernel();
 			return -EROFS;
 		}
 		ubifs_remount_ro(c);
@@ -1793,6 +1801,7 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 	}
 
 	ubifs_assert(c->lst.taken_empty_lebs > 0);
+	unlock_kernel();
 	return 0;
 }
 
@@ -1928,6 +1937,9 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	err  = bdi_init(&c->bdi);
 	if (err)
 		goto out_close;
+	err = bdi_register(&c->bdi, NULL, "ubifs");
+	if (err)
+		goto out_bdi;
 
 	err = ubifs_parse_options(c, data, 0);
 	if (err)
diff --git a/fs/udf/Makefile b/fs/udf/Makefile
index 0d4503f7446..eb880f66c23 100644
--- a/fs/udf/Makefile
+++ b/fs/udf/Makefile
@@ -5,5 +5,5 @@
 obj-$(CONFIG_UDF_FS) += udf.o
 
 udf-objs     := balloc.o dir.o file.o ialloc.o inode.o lowlevel.o namei.o \
-		partition.o super.o truncate.o symlink.o fsync.o \
+		partition.o super.o truncate.o symlink.o \
 		directory.o misc.o udftime.o unicode.o
diff --git a/fs/udf/dir.c b/fs/udf/dir.c
index 2efd4d5291b..61d9a76a3a6 100644
--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -210,5 +210,5 @@ const struct file_operations udf_dir_operations = {
 	.read			= generic_read_dir,
 	.readdir		= udf_readdir,
 	.ioctl			= udf_ioctl,
-	.fsync			= udf_fsync_file,
+	.fsync			= simple_fsync,
 };
diff --git a/fs/udf/file.c b/fs/udf/file.c
index eb91f3b7032..7464305382b 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -209,7 +209,7 @@ const struct file_operations udf_file_operations = {
 	.write			= do_sync_write,
 	.aio_write		= udf_file_aio_write,
 	.release		= udf_release_file,
-	.fsync			= udf_fsync_file,
+	.fsync			= simple_fsync,
 	.splice_read		= generic_file_splice_read,
 	.llseek			= generic_file_llseek,
 };
diff --git a/fs/udf/fsync.c b/fs/udf/fsync.c
deleted file mode 100644
index b2c472b733b..00000000000
--- a/fs/udf/fsync.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * fsync.c
- *
- * PURPOSE
- *  Fsync handling routines for the OSTA-UDF(tm) filesystem.
- *
- * COPYRIGHT
- *  This file is distributed under the terms of the GNU General Public
- *  License (GPL). Copies of the GPL can be obtained from:
- *      ftp://prep.ai.mit.edu/pub/gnu/GPL
- *  Each contributing author retains all rights to their own work.
- *
- *  (C) 1999-2001 Ben Fennema
- *  (C) 1999-2000 Stelias Computing Inc
- *
- * HISTORY
- *
- *  05/22/99 blf  Created.
- */
-
-#include "udfdecl.h"
-
-#include <linux/fs.h>
-
-static int udf_fsync_inode(struct inode *, int);
-
-/*
- *	File may be NULL when we are called. Perhaps we shouldn't
- *	even pass file to fsync ?
- */
-
-int udf_fsync_file(struct file *file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-
-	return udf_fsync_inode(inode, datasync);
-}
-
-static int udf_fsync_inode(struct inode *inode, int datasync)
-{
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-
-	err |= udf_sync_inode(inode);
-
-	return err ? -EIO : 0;
-}
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 0ba44107d8f..6832135159b 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -568,6 +568,7 @@ static int udf_remount_fs(struct super_block *sb, int *flags, char *options)
 	if (!udf_parse_options(options, &uopt, true))
 		return -EINVAL;
 
+	lock_kernel();
 	sbi->s_flags = uopt.flags;
 	sbi->s_uid   = uopt.uid;
 	sbi->s_gid   = uopt.gid;
@@ -581,13 +582,16 @@ static int udf_remount_fs(struct super_block *sb, int *flags, char *options)
 			*flags |= MS_RDONLY;
 	}
 
-	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
+		unlock_kernel();
 		return 0;
+	}
 	if (*flags & MS_RDONLY)
 		udf_close_lvid(sb);
 	else
 		udf_open_lvid(sb);
 
+	unlock_kernel();
 	return 0;
 }
 
@@ -2062,6 +2066,9 @@ static void udf_put_super(struct super_block *sb)
 	struct udf_sb_info *sbi;
 
 	sbi = UDF_SB(sb);
+
+	lock_kernel();
+
 	if (sbi->s_vat_inode)
 		iput(sbi->s_vat_inode);
 	if (sbi->s_partitions)
@@ -2077,6 +2084,8 @@ static void udf_put_super(struct super_block *sb)
 	kfree(sbi->s_partmaps);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int udf_sync_fs(struct super_block *sb, int wait)
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index cac51b77a5d..8d46f4294ee 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -223,9 +223,6 @@ extern int udf_prealloc_blocks(struct super_block *, struct inode *, uint16_t,
 extern int udf_new_block(struct super_block *, struct inode *, uint16_t,
 			 uint32_t, int *);
 
-/* fsync.c */
-extern int udf_fsync_file(struct file *, struct dentry *, int);
-
 /* directory.c */
 extern struct fileIdentDesc *udf_fileident_read(struct inode *, loff_t *,
 						struct udf_fileident_bh *,
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index 6321b797061..6f671f1ac27 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -666,6 +666,6 @@ not_empty:
 const struct file_operations ufs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= ufs_readdir,
-	.fsync		= ufs_sync_file,
+	.fsync		= simple_fsync,
 	.llseek		= generic_file_llseek,
 };
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index 2bd3a161571..73655c61240 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -24,31 +24,10 @@
  */
 
 #include <linux/fs.h>
-#include <linux/buffer_head.h>	/* for sync_mapping_buffers() */
 
 #include "ufs_fs.h"
 #include "ufs.h"
 
-
-int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-	int ret;
-
-	ret = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return ret;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return ret;
-
-	err = ufs_sync_inode(inode);
-	if (ret == 0)
-		ret = err;
-	return ret;
-}
-
-
 /*
  * We have mostly NULL's here: the current defaults are ok for
  * the ufs filesystem.
@@ -62,6 +41,6 @@ const struct file_operations ufs_file_operations = {
 	.aio_write	= generic_file_aio_write,
 	.mmap		= generic_file_mmap,
 	.open           = generic_file_open,
-	.fsync		= ufs_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 };
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 60359291761..5faed7954d0 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -263,6 +263,7 @@ void ufs_panic (struct super_block * sb, const char * function,
 	struct ufs_super_block_first * usb1;
 	va_list args;
 	
+	lock_kernel();
 	uspi = UFS_SB(sb)->s_uspi;
 	usb1 = ubh_get_usb_first(uspi);
 	
@@ -594,6 +595,9 @@ static void ufs_put_super_internal(struct super_block *sb)
 
 	
 	UFSD("ENTER\n");
+
+	lock_kernel();
+
 	ufs_put_cstotal(sb);
 	size = uspi->s_cssize;
 	blks = (size + uspi->s_fsize - 1) >> uspi->s_fshift;
@@ -621,6 +625,9 @@ static void ufs_put_super_internal(struct super_block *sb)
 		brelse (sbi->s_ucg[i]);
 	kfree (sbi->s_ucg);
 	kfree (base);
+
+	unlock_kernel();
+
 	UFSD("EXIT\n");
 }
 
@@ -1118,32 +1125,45 @@ failed_nomem:
 	return -ENOMEM;
 }
 
-static void ufs_write_super(struct super_block *sb)
+static int ufs_sync_fs(struct super_block *sb, int wait)
 {
 	struct ufs_sb_private_info * uspi;
 	struct ufs_super_block_first * usb1;
 	struct ufs_super_block_third * usb3;
 	unsigned flags;
 
+	lock_super(sb);
 	lock_kernel();
+
 	UFSD("ENTER\n");
+
 	flags = UFS_SB(sb)->s_flags;
 	uspi = UFS_SB(sb)->s_uspi;
 	usb1 = ubh_get_usb_first(uspi);
 	usb3 = ubh_get_usb_third(uspi);
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		usb1->fs_time = cpu_to_fs32(sb, get_seconds());
-		if ((flags & UFS_ST_MASK) == UFS_ST_SUN 
-		  || (flags & UFS_ST_MASK) == UFS_ST_SUNOS
-		  || (flags & UFS_ST_MASK) == UFS_ST_SUNx86)
-			ufs_set_fs_state(sb, usb1, usb3,
-					UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
-		ufs_put_cstotal(sb);
-	}
+	usb1->fs_time = cpu_to_fs32(sb, get_seconds());
+	if ((flags & UFS_ST_MASK) == UFS_ST_SUN  ||
+	    (flags & UFS_ST_MASK) == UFS_ST_SUNOS ||
+	    (flags & UFS_ST_MASK) == UFS_ST_SUNx86)
+		ufs_set_fs_state(sb, usb1, usb3,
+				UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
+	ufs_put_cstotal(sb);
 	sb->s_dirt = 0;
+
 	UFSD("EXIT\n");
 	unlock_kernel();
+	unlock_super(sb);
+
+	return 0;
+}
+
+static void ufs_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		ufs_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static void ufs_put_super(struct super_block *sb)
@@ -1152,6 +1172,9 @@ static void ufs_put_super(struct super_block *sb)
 		
 	UFSD("ENTER\n");
 
+	if (sb->s_dirt)
+		ufs_write_super(sb);
+
 	if (!(sb->s_flags & MS_RDONLY))
 		ufs_put_super_internal(sb);
 	
@@ -1171,7 +1194,9 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 	struct ufs_super_block_third * usb3;
 	unsigned new_mount_opt, ufstype;
 	unsigned flags;
-	
+
+	lock_kernel();
+	lock_super(sb);
 	uspi = UFS_SB(sb)->s_uspi;
 	flags = UFS_SB(sb)->s_flags;
 	usb1 = ubh_get_usb_first(uspi);
@@ -1184,17 +1209,24 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 	ufstype = UFS_SB(sb)->s_mount_opt & UFS_MOUNT_UFSTYPE;
 	new_mount_opt = 0;
 	ufs_set_opt (new_mount_opt, ONERROR_LOCK);
-	if (!ufs_parse_options (data, &new_mount_opt))
+	if (!ufs_parse_options (data, &new_mount_opt)) {
+		unlock_super(sb);
+		unlock_kernel();
 		return -EINVAL;
+	}
 	if (!(new_mount_opt & UFS_MOUNT_UFSTYPE)) {
 		new_mount_opt |= ufstype;
 	} else if ((new_mount_opt & UFS_MOUNT_UFSTYPE) != ufstype) {
 		printk("ufstype can't be changed during remount\n");
+		unlock_super(sb);
+		unlock_kernel();
 		return -EINVAL;
 	}
 
 	if ((*mount_flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
 		UFS_SB(sb)->s_mount_opt = new_mount_opt;
+		unlock_super(sb);
+		unlock_kernel();
 		return 0;
 	}
 	
@@ -1219,6 +1251,8 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 #ifndef CONFIG_UFS_FS_WRITE
 		printk("ufs was compiled with read-only support, "
 		"can't be mounted as read-write\n");
+		unlock_super(sb);
+		unlock_kernel();
 		return -EINVAL;
 #else
 		if (ufstype != UFS_MOUNT_UFSTYPE_SUN && 
@@ -1227,16 +1261,22 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 		    ufstype != UFS_MOUNT_UFSTYPE_SUNx86 &&
 		    ufstype != UFS_MOUNT_UFSTYPE_UFS2) {
 			printk("this ufstype is read-only supported\n");
+			unlock_super(sb);
+			unlock_kernel();
 			return -EINVAL;
 		}
 		if (!ufs_read_cylinder_structures(sb)) {
 			printk("failed during remounting\n");
+			unlock_super(sb);
+			unlock_kernel();
 			return -EPERM;
 		}
 		sb->s_flags &= ~MS_RDONLY;
 #endif
 	}
 	UFS_SB(sb)->s_mount_opt = new_mount_opt;
+	unlock_super(sb);
+	unlock_kernel();
 	return 0;
 }
 
@@ -1352,6 +1392,7 @@ static const struct super_operations ufs_super_ops = {
 	.delete_inode	= ufs_delete_inode,
 	.put_super	= ufs_put_super,
 	.write_super	= ufs_write_super,
+	.sync_fs	= ufs_sync_fs,
 	.statfs		= ufs_statfs,
 	.remount_fs	= ufs_remount,
 	.show_options   = ufs_show_options,
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index d0c4acd4f1f..644e77e1359 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -99,7 +99,6 @@ extern void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de,
 extern const struct inode_operations ufs_file_inode_operations;
 extern const struct file_operations ufs_file_operations;
 extern const struct address_space_operations ufs_aops;
-extern int ufs_sync_file(struct file *, struct dentry *, int);
 
 /* ialloc.c */
 extern void ufs_free_inode (struct inode *inode);
diff --git a/fs/xattr.c b/fs/xattr.c
index d51b8f9db92..1c3d0af59dd 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -297,7 +297,7 @@ SYSCALL_DEFINE5(fsetxattr, int, fd, const char __user *, name,
 		return error;
 	dentry = f->f_path.dentry;
 	audit_inode(NULL, dentry);
-	error = mnt_want_write(f->f_path.mnt);
+	error = mnt_want_write_file(f);
 	if (!error) {
 		error = setxattr(dentry, name, value, size, flags);
 		mnt_drop_write(f->f_path.mnt);
@@ -524,7 +524,7 @@ SYSCALL_DEFINE2(fremovexattr, int, fd, const char __user *, name)
 		return error;
 	dentry = f->f_path.dentry;
 	audit_inode(NULL, dentry);
-	error = mnt_want_write(f->f_path.mnt);
+	error = mnt_want_write_file(f);
 	if (!error) {
 		error = removexattr(dentry, name);
 		mnt_drop_write(f->f_path.mnt);
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 29228f5899c..480f28127f0 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -39,6 +39,7 @@ config XFS_QUOTA
 config XFS_POSIX_ACL
 	bool "XFS POSIX ACL support"
 	depends on XFS_FS
+	select FS_POSIX_ACL
 	help
 	  POSIX Access Control Lists (ACLs) support permissions for users and
 	  groups beyond the owner/group/world scheme.
diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index 60f107e47fe..7a59daed178 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -40,7 +40,7 @@ xfs-$(CONFIG_PROC_FS)		+= quota/xfs_qm_stats.o
 endif
 
 xfs-$(CONFIG_XFS_RT)		+= xfs_rtalloc.o
-xfs-$(CONFIG_XFS_POSIX_ACL)	+= xfs_acl.o
+xfs-$(CONFIG_XFS_POSIX_ACL)	+= $(XFS_LINUX)/xfs_acl.o
 xfs-$(CONFIG_PROC_FS)		+= $(XFS_LINUX)/xfs_stats.o
 xfs-$(CONFIG_SYSCTL)		+= $(XFS_LINUX)/xfs_sysctl.o
 xfs-$(CONFIG_COMPAT)		+= $(XFS_LINUX)/xfs_ioctl32.o
@@ -88,8 +88,7 @@ xfs-y				+= xfs_alloc.o \
 				   xfs_utils.o \
 				   xfs_vnodeops.o \
 				   xfs_rw.o \
-				   xfs_dmops.o \
-				   xfs_qmops.o
+				   xfs_dmops.o
 
 xfs-$(CONFIG_XFS_TRACE)		+= xfs_btree_trace.o \
 				   xfs_dir2_trace.o
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
new file mode 100644
index 00000000000..1e9d1246eeb
--- /dev/null
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -0,0 +1,523 @@
+/*
+ * Copyright (c) 2008, Christoph Hellwig
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include "xfs.h"
+#include "xfs_acl.h"
+#include "xfs_attr.h"
+#include "xfs_bmap_btree.h"
+#include "xfs_inode.h"
+#include "xfs_vnodeops.h"
+#include <linux/xattr.h>
+#include <linux/posix_acl_xattr.h>
+
+
+#define XFS_ACL_NOT_CACHED	((void *)-1)
+
+/*
+ * Locking scheme:
+ *  - all ACL updates are protected by inode->i_mutex, which is taken before
+ *    calling into this file.
+ *  - access and updates to the ip->i_acl and ip->i_default_acl pointers are
+ *    protected by inode->i_lock.
+ */
+
+STATIC struct posix_acl *
+xfs_acl_from_disk(struct xfs_acl *aclp)
+{
+	struct posix_acl_entry *acl_e;
+	struct posix_acl *acl;
+	struct xfs_acl_entry *ace;
+	int count, i;
+
+	count = be32_to_cpu(aclp->acl_cnt);
+
+	acl = posix_acl_alloc(count, GFP_KERNEL);
+	if (!acl)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < count; i++) {
+		acl_e = &acl->a_entries[i];
+		ace = &aclp->acl_entry[i];
+
+		/*
+		 * The tag is 32 bits on disk and 16 bits in core.
+		 *
+		 * Because every access to it goes through the core
+		 * format first this is not a problem.
+		 */
+		acl_e->e_tag = be32_to_cpu(ace->ae_tag);
+		acl_e->e_perm = be16_to_cpu(ace->ae_perm);
+
+		switch (acl_e->e_tag) {
+		case ACL_USER:
+		case ACL_GROUP:
+			acl_e->e_id = be32_to_cpu(ace->ae_id);
+			break;
+		case ACL_USER_OBJ:
+		case ACL_GROUP_OBJ:
+		case ACL_MASK:
+		case ACL_OTHER:
+			acl_e->e_id = ACL_UNDEFINED_ID;
+			break;
+		default:
+			goto fail;
+		}
+	}
+	return acl;
+
+fail:
+	posix_acl_release(acl);
+	return ERR_PTR(-EINVAL);
+}
+
+STATIC void
+xfs_acl_to_disk(struct xfs_acl *aclp, const struct posix_acl *acl)
+{
+	const struct posix_acl_entry *acl_e;
+	struct xfs_acl_entry *ace;
+	int i;
+
+	aclp->acl_cnt = cpu_to_be32(acl->a_count);
+	for (i = 0; i < acl->a_count; i++) {
+		ace = &aclp->acl_entry[i];
+		acl_e = &acl->a_entries[i];
+
+		ace->ae_tag = cpu_to_be32(acl_e->e_tag);
+		ace->ae_id = cpu_to_be32(acl_e->e_id);
+		ace->ae_perm = cpu_to_be16(acl_e->e_perm);
+	}
+}
+
+/*
+ * Update the cached ACL pointer in the inode.
+ *
+ * Because we don't hold any locks while reading/writing the attribute
+ * from/to disk another thread could have raced and updated the cached
+ * ACL value before us. In that case we release the previous cached value
+ * and update it with our new value.
+ */
+STATIC void
+xfs_update_cached_acl(struct inode *inode, struct posix_acl **p_acl,
+		struct posix_acl *acl)
+{
+	spin_lock(&inode->i_lock);
+	if (*p_acl && *p_acl != XFS_ACL_NOT_CACHED)
+		posix_acl_release(*p_acl);
+	*p_acl = posix_acl_dup(acl);
+	spin_unlock(&inode->i_lock);
+}
+
+struct posix_acl *
+xfs_get_acl(struct inode *inode, int type)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	struct posix_acl *acl = NULL, **p_acl;
+	struct xfs_acl *xfs_acl;
+	int len = sizeof(struct xfs_acl);
+	char *ea_name;
+	int error;
+
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		ea_name = SGI_ACL_FILE;
+		p_acl = &ip->i_acl;
+		break;
+	case ACL_TYPE_DEFAULT:
+		ea_name = SGI_ACL_DEFAULT;
+		p_acl = &ip->i_default_acl;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	spin_lock(&inode->i_lock);
+	if (*p_acl != XFS_ACL_NOT_CACHED)
+		acl = posix_acl_dup(*p_acl);
+	spin_unlock(&inode->i_lock);
+
+	/*
+	 * If we have a cached ACLs value just return it, not need to
+	 * go out to the disk.
+	 */
+	if (acl)
+		return acl;
+
+	xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+	if (!xfs_acl)
+		return ERR_PTR(-ENOMEM);
+
+	error = -xfs_attr_get(ip, ea_name, (char *)xfs_acl, &len, ATTR_ROOT);
+	if (error) {
+		/*
+		 * If the attribute doesn't exist make sure we have a negative
+		 * cache entry, for any other error assume it is transient and
+		 * leave the cache entry as XFS_ACL_NOT_CACHED.
+		 */
+		if (error == -ENOATTR) {
+			acl = NULL;
+			goto out_update_cache;
+		}
+		goto out;
+	}
+
+	acl = xfs_acl_from_disk(xfs_acl);
+	if (IS_ERR(acl))
+		goto out;
+
+ out_update_cache:
+	xfs_update_cached_acl(inode, p_acl, acl);
+ out:
+	kfree(xfs_acl);
+	return acl;
+}
+
+STATIC int
+xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	struct posix_acl **p_acl;
+	char *ea_name;
+	int error;
+
+	if (S_ISLNK(inode->i_mode))
+		return -EOPNOTSUPP;
+
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		ea_name = SGI_ACL_FILE;
+		p_acl = &ip->i_acl;
+		break;
+	case ACL_TYPE_DEFAULT:
+		if (!S_ISDIR(inode->i_mode))
+			return acl ? -EACCES : 0;
+		ea_name = SGI_ACL_DEFAULT;
+		p_acl = &ip->i_default_acl;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (acl) {
+		struct xfs_acl *xfs_acl;
+		int len;
+
+		xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+		if (!xfs_acl)
+			return -ENOMEM;
+
+		xfs_acl_to_disk(xfs_acl, acl);
+		len = sizeof(struct xfs_acl) -
+			(sizeof(struct xfs_acl_entry) *
+			 (XFS_ACL_MAX_ENTRIES - acl->a_count));
+
+		error = -xfs_attr_set(ip, ea_name, (char *)xfs_acl,
+				len, ATTR_ROOT);
+
+		kfree(xfs_acl);
+	} else {
+		/*
+		 * A NULL ACL argument means we want to remove the ACL.
+		 */
+		error = -xfs_attr_remove(ip, ea_name, ATTR_ROOT);
+
+		/*
+		 * If the attribute didn't exist to start with that's fine.
+		 */
+		if (error == -ENOATTR)
+			error = 0;
+	}
+
+	if (!error)
+		xfs_update_cached_acl(inode, p_acl, acl);
+	return error;
+}
+
+int
+xfs_check_acl(struct inode *inode, int mask)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	struct posix_acl *acl;
+	int error = -EAGAIN;
+
+	xfs_itrace_entry(ip);
+
+	/*
+	 * If there is no attribute fork no ACL exists on this inode and
+	 * we can skip the whole exercise.
+	 */
+	if (!XFS_IFORK_Q(ip))
+		return -EAGAIN;
+
+	acl = xfs_get_acl(inode, ACL_TYPE_ACCESS);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
+	if (acl) {
+		error = posix_acl_permission(inode, acl, mask);
+		posix_acl_release(acl);
+	}
+
+	return error;
+}
+
+static int
+xfs_set_mode(struct inode *inode, mode_t mode)
+{
+	int error = 0;
+
+	if (mode != inode->i_mode) {
+		struct iattr iattr;
+
+		iattr.ia_valid = ATTR_MODE;
+		iattr.ia_mode = mode;
+
+		error = -xfs_setattr(XFS_I(inode), &iattr, XFS_ATTR_NOACL);
+	}
+
+	return error;
+}
+
+static int
+xfs_acl_exists(struct inode *inode, char *name)
+{
+	int len = sizeof(struct xfs_acl);
+
+	return (xfs_attr_get(XFS_I(inode), name, NULL, &len,
+			    ATTR_ROOT|ATTR_KERNOVAL) == 0);
+}
+
+int
+posix_acl_access_exists(struct inode *inode)
+{
+	return xfs_acl_exists(inode, SGI_ACL_FILE);
+}
+
+int
+posix_acl_default_exists(struct inode *inode)
+{
+	if (!S_ISDIR(inode->i_mode))
+		return 0;
+	return xfs_acl_exists(inode, SGI_ACL_DEFAULT);
+}
+
+/*
+ * No need for i_mutex because the inode is not yet exposed to the VFS.
+ */
+int
+xfs_inherit_acl(struct inode *inode, struct posix_acl *default_acl)
+{
+	struct posix_acl *clone;
+	mode_t mode;
+	int error = 0, inherit = 0;
+
+	if (S_ISDIR(inode->i_mode)) {
+		error = xfs_set_acl(inode, ACL_TYPE_DEFAULT, default_acl);
+		if (error)
+			return error;
+	}
+
+	clone = posix_acl_clone(default_acl, GFP_KERNEL);
+	if (!clone)
+		return -ENOMEM;
+
+	mode = inode->i_mode;
+	error = posix_acl_create_masq(clone, &mode);
+	if (error < 0)
+		goto out_release_clone;
+
+	/*
+	 * If posix_acl_create_masq returns a positive value we need to
+	 * inherit a permission that can't be represented using the Unix
+	 * mode bits and we actually need to set an ACL.
+	 */
+	if (error > 0)
+		inherit = 1;
+
+	error = xfs_set_mode(inode, mode);
+	if (error)
+		goto out_release_clone;
+
+	if (inherit)
+		error = xfs_set_acl(inode, ACL_TYPE_ACCESS, clone);
+
+ out_release_clone:
+	posix_acl_release(clone);
+	return error;
+}
+
+int
+xfs_acl_chmod(struct inode *inode)
+{
+	struct posix_acl *acl, *clone;
+	int error;
+
+	if (S_ISLNK(inode->i_mode))
+		return -EOPNOTSUPP;
+
+	acl = xfs_get_acl(inode, ACL_TYPE_ACCESS);
+	if (IS_ERR(acl) || !acl)
+		return PTR_ERR(acl);
+
+	clone = posix_acl_clone(acl, GFP_KERNEL);
+	posix_acl_release(acl);
+	if (!clone)
+		return -ENOMEM;
+
+	error = posix_acl_chmod_masq(clone, inode->i_mode);
+	if (!error)
+		error = xfs_set_acl(inode, ACL_TYPE_ACCESS, clone);
+
+	posix_acl_release(clone);
+	return error;
+}
+
+void
+xfs_inode_init_acls(struct xfs_inode *ip)
+{
+	/*
+	 * No need for locking, inode is not live yet.
+	 */
+	ip->i_acl = XFS_ACL_NOT_CACHED;
+	ip->i_default_acl = XFS_ACL_NOT_CACHED;
+}
+
+void
+xfs_inode_clear_acls(struct xfs_inode *ip)
+{
+	/*
+	 * No need for locking here, the inode is not live anymore
+	 * and just about to be freed.
+	 */
+	if (ip->i_acl != XFS_ACL_NOT_CACHED)
+		posix_acl_release(ip->i_acl);
+	if (ip->i_default_acl != XFS_ACL_NOT_CACHED)
+		posix_acl_release(ip->i_default_acl);
+}
+
+
+/*
+ * System xattr handlers.
+ *
+ * Currently Posix ACLs are the only system namespace extended attribute
+ * handlers supported by XFS, so we just implement the handlers here.
+ * If we ever support other system extended attributes this will need
+ * some refactoring.
+ */
+
+static int
+xfs_decode_acl(const char *name)
+{
+	if (strcmp(name, "posix_acl_access") == 0)
+		return ACL_TYPE_ACCESS;
+	else if (strcmp(name, "posix_acl_default") == 0)
+		return ACL_TYPE_DEFAULT;
+	return -EINVAL;
+}
+
+static int
+xfs_xattr_system_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	struct posix_acl *acl;
+	int type, error;
+
+	type = xfs_decode_acl(name);
+	if (type < 0)
+		return type;
+
+	acl = xfs_get_acl(inode, type);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
+	if (acl == NULL)
+		return -ENODATA;
+
+	error = posix_acl_to_xattr(acl, value, size);
+	posix_acl_release(acl);
+
+	return error;
+}
+
+static int
+xfs_xattr_system_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	struct posix_acl *acl = NULL;
+	int error = 0, type;
+
+	type = xfs_decode_acl(name);
+	if (type < 0)
+		return type;
+	if (flags & XATTR_CREATE)
+		return -EINVAL;
+	if (type == ACL_TYPE_DEFAULT && !S_ISDIR(inode->i_mode))
+		return value ? -EACCES : 0;
+	if ((current_fsuid() != inode->i_uid) && !capable(CAP_FOWNER))
+		return -EPERM;
+
+	if (!value)
+		goto set_acl;
+
+	acl = posix_acl_from_xattr(value, size);
+	if (!acl) {
+		/*
+		 * acl_set_file(3) may request that we set default ACLs with
+		 * zero length -- defend (gracefully) against that here.
+		 */
+		goto out;
+	}
+	if (IS_ERR(acl)) {
+		error = PTR_ERR(acl);
+		goto out;
+	}
+
+	error = posix_acl_valid(acl);
+	if (error)
+		goto out_release;
+
+	error = -EINVAL;
+	if (acl->a_count > XFS_ACL_MAX_ENTRIES)
+		goto out_release;
+
+	if (type == ACL_TYPE_ACCESS) {
+		mode_t mode = inode->i_mode;
+		error = posix_acl_equiv_mode(acl, &mode);
+
+		if (error <= 0) {
+			posix_acl_release(acl);
+			acl = NULL;
+
+			if (error < 0)
+				return error;
+		}
+
+		error = xfs_set_mode(inode, mode);
+		if (error)
+			goto out_release;
+	}
+
+ set_acl:
+	error = xfs_set_acl(inode, type, acl);
+ out_release:
+	posix_acl_release(acl);
+ out:
+	return error;
+}
+
+struct xattr_handler xfs_xattr_system_handler = {
+	.prefix	= XATTR_SYSTEM_PREFIX,
+	.get	= xfs_xattr_system_get,
+	.set	= xfs_xattr_system_set,
+};
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 34eaab608e6..5bb523d7f37 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -41,7 +41,6 @@
 #include "xfs_itable.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_bmap.h"
 #include "xfs_buf_item.h"
@@ -899,7 +898,8 @@ xfs_ioctl_setattr(
 	struct xfs_mount	*mp = ip->i_mount;
 	struct xfs_trans	*tp;
 	unsigned int		lock_flags = 0;
-	struct xfs_dquot	*udqp = NULL, *gdqp = NULL;
+	struct xfs_dquot	*udqp = NULL;
+	struct xfs_dquot	*gdqp = NULL;
 	struct xfs_dquot	*olddquot = NULL;
 	int			code;
 
@@ -919,7 +919,7 @@ xfs_ioctl_setattr(
 	 * because the i_*dquot fields will get updated anyway.
 	 */
 	if (XFS_IS_QUOTA_ON(mp) && (mask & FSX_PROJID)) {
-		code = XFS_QM_DQVOPALLOC(mp, ip, ip->i_d.di_uid,
+		code = xfs_qm_vop_dqalloc(ip, ip->i_d.di_uid,
 					 ip->i_d.di_gid, fa->fsx_projid,
 					 XFS_QMOPT_PQUOTA, &udqp, &gdqp);
 		if (code)
@@ -954,10 +954,11 @@ xfs_ioctl_setattr(
 	 * Do a quota reservation only if projid is actually going to change.
 	 */
 	if (mask & FSX_PROJID) {
-		if (XFS_IS_PQUOTA_ON(mp) &&
+		if (XFS_IS_QUOTA_RUNNING(mp) &&
+		    XFS_IS_PQUOTA_ON(mp) &&
 		    ip->i_d.di_projid != fa->fsx_projid) {
 			ASSERT(tp);
-			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
+			code = xfs_qm_vop_chown_reserve(tp, ip, udqp, gdqp,
 						capable(CAP_FOWNER) ?
 						XFS_QMOPT_FORCE_RES : 0);
 			if (code)	/* out of quota */
@@ -1059,8 +1060,8 @@ xfs_ioctl_setattr(
 		 * in the transaction.
 		 */
 		if (ip->i_d.di_projid != fa->fsx_projid) {
-			if (XFS_IS_PQUOTA_ON(mp)) {
-				olddquot = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+			if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_PQUOTA_ON(mp)) {
+				olddquot = xfs_qm_vop_chown(tp, ip,
 							&ip->i_gdquot, gdqp);
 			}
 			ip->i_d.di_projid = fa->fsx_projid;
@@ -1106,9 +1107,9 @@ xfs_ioctl_setattr(
 	/*
 	 * Release any dquot(s) the inode had kept before chown.
 	 */
-	XFS_QM_DQRELE(mp, olddquot);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(olddquot);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	if (code)
 		return code;
@@ -1122,8 +1123,8 @@ xfs_ioctl_setattr(
 	return 0;
 
  error_return:
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 	xfs_trans_cancel(tp, 0);
 	if (lock_flags)
 		xfs_iunlock(ip, lock_flags);
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 6075382336d..58973bb4603 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -17,6 +17,7 @@
  */
 #include "xfs.h"
 #include "xfs_fs.h"
+#include "xfs_acl.h"
 #include "xfs_bit.h"
 #include "xfs_log.h"
 #include "xfs_inum.h"
@@ -51,6 +52,7 @@
 #include <linux/capability.h>
 #include <linux/xattr.h>
 #include <linux/namei.h>
+#include <linux/posix_acl.h>
 #include <linux/security.h>
 #include <linux/falloc.h>
 #include <linux/fiemap.h>
@@ -202,9 +204,8 @@ xfs_vn_mknod(
 {
 	struct inode	*inode;
 	struct xfs_inode *ip = NULL;
-	xfs_acl_t	*default_acl = NULL;
+	struct posix_acl *default_acl = NULL;
 	struct xfs_name	name;
-	int (*test_default_acl)(struct inode *) = _ACL_DEFAULT_EXISTS;
 	int		error;
 
 	/*
@@ -219,18 +220,14 @@ xfs_vn_mknod(
 		rdev = 0;
 	}
 
-	if (test_default_acl && test_default_acl(dir)) {
-		if (!_ACL_ALLOC(default_acl)) {
-			return -ENOMEM;
-		}
-		if (!_ACL_GET_DEFAULT(dir, default_acl)) {
-			_ACL_FREE(default_acl);
-			default_acl = NULL;
-		}
-	}
+	if (IS_POSIXACL(dir)) {
+		default_acl = xfs_get_acl(dir, ACL_TYPE_DEFAULT);
+		if (IS_ERR(default_acl))
+			return -PTR_ERR(default_acl);
 
-	if (IS_POSIXACL(dir) && !default_acl)
-		mode &= ~current_umask();
+		if (!default_acl)
+			mode &= ~current_umask();
+	}
 
 	xfs_dentry_to_name(&name, dentry);
 	error = xfs_create(XFS_I(dir), &name, mode, rdev, &ip, NULL);
@@ -244,10 +241,10 @@ xfs_vn_mknod(
 		goto out_cleanup_inode;
 
 	if (default_acl) {
-		error = _ACL_INHERIT(inode, mode, default_acl);
+		error = -xfs_inherit_acl(inode, default_acl);
 		if (unlikely(error))
 			goto out_cleanup_inode;
-		_ACL_FREE(default_acl);
+		posix_acl_release(default_acl);
 	}
 
 
@@ -257,8 +254,7 @@ xfs_vn_mknod(
  out_cleanup_inode:
 	xfs_cleanup_inode(dir, inode, dentry);
  out_free_acl:
-	if (default_acl)
-		_ACL_FREE(default_acl);
+	posix_acl_release(default_acl);
 	return -error;
 }
 
@@ -488,26 +484,6 @@ xfs_vn_put_link(
 		kfree(s);
 }
 
-#ifdef CONFIG_XFS_POSIX_ACL
-STATIC int
-xfs_check_acl(
-	struct inode		*inode,
-	int			mask)
-{
-	struct xfs_inode	*ip = XFS_I(inode);
-	int			error;
-
-	xfs_itrace_entry(ip);
-
-	if (XFS_IFORK_Q(ip)) {
-		error = xfs_acl_iaccess(ip, mask, NULL);
-		if (error != -1)
-			return -error;
-	}
-
-	return -EAGAIN;
-}
-
 STATIC int
 xfs_vn_permission(
 	struct inode		*inode,
@@ -515,9 +491,6 @@ xfs_vn_permission(
 {
 	return generic_permission(inode, mask, xfs_check_acl);
 }
-#else
-#define xfs_vn_permission NULL
-#endif
 
 STATIC int
 xfs_vn_getattr(
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 9142192ccbe..7078974a6ee 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_inode_item.h"
 #include "xfs_buf_item.h"
diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c
index 94d9a633d3d..cb6e2cca214 100644
--- a/fs/xfs/linux-2.6/xfs_quotaops.c
+++ b/fs/xfs/linux-2.6/xfs_quotaops.c
@@ -50,9 +50,11 @@ xfs_fs_quota_sync(
 {
 	struct xfs_mount	*mp = XFS_M(sb);
 
+	if (sb->s_flags & MS_RDONLY)
+		return -EROFS;
 	if (!XFS_IS_QUOTA_RUNNING(mp))
 		return -ENOSYS;
-	return -xfs_sync_inodes(mp, SYNC_DELWRI);
+	return -xfs_sync_data(mp, 0);
 }
 
 STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index bb685269f83..2e09efbca8d 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -43,7 +43,6 @@
 #include "xfs_itable.h"
 #include "xfs_fsops.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -405,6 +404,14 @@ xfs_parseargs(
 		return EINVAL;
 	}
 
+#ifndef CONFIG_XFS_QUOTA
+	if (XFS_IS_QUOTA_RUNNING(mp)) {
+		cmn_err(CE_WARN,
+			"XFS: quota support not available in this kernel.");
+		return EINVAL;
+	}
+#endif
+
 	if ((mp->m_qflags & (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE)) &&
 	    (mp->m_qflags & (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE))) {
 		cmn_err(CE_WARN,
@@ -1063,7 +1070,18 @@ xfs_fs_put_super(
 	int			unmount_event_flags = 0;
 
 	xfs_syncd_stop(mp);
-	xfs_sync_inodes(mp, SYNC_ATTR|SYNC_DELWRI);
+
+	if (!(sb->s_flags & MS_RDONLY)) {
+		/*
+		 * XXX(hch): this should be SYNC_WAIT.
+		 *
+		 * Or more likely not needed at all because the VFS is already
+		 * calling ->sync_fs after shutting down all filestem
+		 * operations and just before calling ->put_super.
+		 */
+		xfs_sync_data(mp, 0);
+		xfs_sync_attr(mp, 0);
+	}
 
 #ifdef HAVE_DMAPI
 	if (mp->m_flags & XFS_MOUNT_DMAPI) {
@@ -1098,21 +1116,11 @@ xfs_fs_put_super(
 	xfs_freesb(mp);
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
-	xfs_qmops_put(mp);
 	xfs_dmops_put(mp);
 	xfs_free_fsname(mp);
 	kfree(mp);
 }
 
-STATIC void
-xfs_fs_write_super(
-	struct super_block	*sb)
-{
-	if (!(sb->s_flags & MS_RDONLY))
-		xfs_sync_fsdata(XFS_M(sb), 0);
-	sb->s_dirt = 0;
-}
-
 STATIC int
 xfs_fs_sync_super(
 	struct super_block	*sb,
@@ -1137,7 +1145,6 @@ xfs_fs_sync_super(
 		error = xfs_quiesce_data(mp);
 	else
 		error = xfs_sync_fsdata(mp, 0);
-	sb->s_dirt = 0;
 
 	if (unlikely(laptop_mode)) {
 		int	prev_sync_seq = mp->m_sync_seq;
@@ -1168,6 +1175,7 @@ xfs_fs_statfs(
 {
 	struct xfs_mount	*mp = XFS_M(dentry->d_sb);
 	xfs_sb_t		*sbp = &mp->m_sb;
+	struct xfs_inode	*ip = XFS_I(dentry->d_inode);
 	__uint64_t		fakeinos, id;
 	xfs_extlen_t		lsize;
 
@@ -1196,7 +1204,10 @@ xfs_fs_statfs(
 	statp->f_ffree = statp->f_files - (sbp->sb_icount - sbp->sb_ifree);
 	spin_unlock(&mp->m_sb_lock);
 
-	XFS_QM_DQSTATVFS(XFS_I(dentry->d_inode), statp);
+	if ((ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) ||
+	    ((mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))) ==
+			      (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
+		xfs_qm_statvfs(ip, statp);
 	return 0;
 }
 
@@ -1404,16 +1415,13 @@ xfs_fs_fill_super(
 	error = xfs_dmops_get(mp);
 	if (error)
 		goto out_free_fsname;
-	error = xfs_qmops_get(mp);
-	if (error)
-		goto out_put_dmops;
 
 	if (silent)
 		flags |= XFS_MFSI_QUIET;
 
 	error = xfs_open_devices(mp);
 	if (error)
-		goto out_put_qmops;
+		goto out_put_dmops;
 
 	if (xfs_icsb_init_counters(mp))
 		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
@@ -1443,7 +1451,6 @@ xfs_fs_fill_super(
 
 	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, mtpt, mp->m_fsname);
 
-	sb->s_dirt = 1;
 	sb->s_magic = XFS_SB_MAGIC;
 	sb->s_blocksize = mp->m_sb.sb_blocksize;
 	sb->s_blocksize_bits = ffs(sb->s_blocksize) - 1;
@@ -1482,8 +1489,6 @@ xfs_fs_fill_super(
  out_destroy_counters:
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
- out_put_qmops:
-	xfs_qmops_put(mp);
  out_put_dmops:
 	xfs_dmops_put(mp);
  out_free_fsname:
@@ -1533,7 +1538,6 @@ static struct super_operations xfs_super_operations = {
 	.write_inode		= xfs_fs_write_inode,
 	.clear_inode		= xfs_fs_clear_inode,
 	.put_super		= xfs_fs_put_super,
-	.write_super		= xfs_fs_write_super,
 	.sync_fs		= xfs_fs_sync_super,
 	.freeze_fs		= xfs_fs_freeze,
 	.statfs			= xfs_fs_statfs,
@@ -1718,18 +1722,8 @@ xfs_init_zones(void)
 	if (!xfs_ili_zone)
 		goto out_destroy_inode_zone;
 
-#ifdef CONFIG_XFS_POSIX_ACL
-	xfs_acl_zone = kmem_zone_init(sizeof(xfs_acl_t), "xfs_acl");
-	if (!xfs_acl_zone)
-		goto out_destroy_ili_zone;
-#endif
-
 	return 0;
 
-#ifdef CONFIG_XFS_POSIX_ACL
- out_destroy_ili_zone:
-#endif
-	kmem_zone_destroy(xfs_ili_zone);
  out_destroy_inode_zone:
 	kmem_zone_destroy(xfs_inode_zone);
  out_destroy_efi_zone:
@@ -1763,9 +1757,6 @@ xfs_init_zones(void)
 STATIC void
 xfs_destroy_zones(void)
 {
-#ifdef CONFIG_XFS_POSIX_ACL
-	kmem_zone_destroy(xfs_acl_zone);
-#endif
 	kmem_zone_destroy(xfs_ili_zone);
 	kmem_zone_destroy(xfs_inode_zone);
 	kmem_zone_destroy(xfs_efi_zone);
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index f7ba76633c2..b619d6b8ca4 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -43,166 +43,267 @@
 #include "xfs_buf_item.h"
 #include "xfs_inode_item.h"
 #include "xfs_rw.h"
+#include "xfs_quota.h"
 
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-/*
- * Sync all the inodes in the given AG according to the
- * direction given by the flags.
- */
-STATIC int
-xfs_sync_inodes_ag(
-	xfs_mount_t	*mp,
-	int		ag,
-	int		flags)
-{
-	xfs_perag_t	*pag = &mp->m_perag[ag];
-	int		nr_found;
-	uint32_t	first_index = 0;
-	int		error = 0;
-	int		last_error = 0;
 
-	do {
-		struct inode	*inode;
-		xfs_inode_t	*ip = NULL;
-		int		lock_flags = XFS_ILOCK_SHARED;
+STATIC xfs_inode_t *
+xfs_inode_ag_lookup(
+	struct xfs_mount	*mp,
+	struct xfs_perag	*pag,
+	uint32_t		*first_index,
+	int			tag)
+{
+	int			nr_found;
+	struct xfs_inode	*ip;
 
-		/*
-		 * use a gang lookup to find the next inode in the tree
-		 * as the tree is sparse and a gang lookup walks to find
-		 * the number of objects requested.
-		 */
-		read_lock(&pag->pag_ici_lock);
+	/*
+	 * use a gang lookup to find the next inode in the tree
+	 * as the tree is sparse and a gang lookup walks to find
+	 * the number of objects requested.
+	 */
+	read_lock(&pag->pag_ici_lock);
+	if (tag == XFS_ICI_NO_TAG) {
 		nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
-				(void**)&ip, first_index, 1);
+				(void **)&ip, *first_index, 1);
+	} else {
+		nr_found = radix_tree_gang_lookup_tag(&pag->pag_ici_root,
+				(void **)&ip, *first_index, 1, tag);
+	}
+	if (!nr_found)
+		goto unlock;
 
-		if (!nr_found) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
+	/*
+	 * Update the index for the next lookup. Catch overflows
+	 * into the next AG range which can occur if we have inodes
+	 * in the last block of the AG and we are currently
+	 * pointing to the last inode.
+	 */
+	*first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
+	if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
+		goto unlock;
 
-		/*
-		 * Update the index for the next lookup. Catch overflows
-		 * into the next AG range which can occur if we have inodes
-		 * in the last block of the AG and we are currently
-		 * pointing to the last inode.
-		 */
-		first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
-		if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
+	return ip;
 
-		/* nothing to sync during shutdown */
-		if (XFS_FORCED_SHUTDOWN(mp)) {
-			read_unlock(&pag->pag_ici_lock);
-			return 0;
-		}
+unlock:
+	read_unlock(&pag->pag_ici_lock);
+	return NULL;
+}
 
-		/*
-		 * If we can't get a reference on the inode, it must be
-		 * in reclaim. Leave it for the reclaim code to flush.
-		 */
-		inode = VFS_I(ip);
-		if (!igrab(inode)) {
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
-		read_unlock(&pag->pag_ici_lock);
+STATIC int
+xfs_inode_ag_walk(
+	struct xfs_mount	*mp,
+	xfs_agnumber_t		ag,
+	int			(*execute)(struct xfs_inode *ip,
+					   struct xfs_perag *pag, int flags),
+	int			flags,
+	int			tag)
+{
+	struct xfs_perag	*pag = &mp->m_perag[ag];
+	uint32_t		first_index;
+	int			last_error = 0;
+	int			skipped;
 
-		/* avoid new or bad inodes */
-		if (is_bad_inode(inode) ||
-		    xfs_iflags_test(ip, XFS_INEW)) {
-			IRELE(ip);
-			continue;
-		}
+restart:
+	skipped = 0;
+	first_index = 0;
+	do {
+		int		error = 0;
+		xfs_inode_t	*ip;
 
-		/*
-		 * If we have to flush data or wait for I/O completion
-		 * we need to hold the iolock.
-		 */
-		if (flags & SYNC_DELWRI) {
-			if (VN_DIRTY(inode)) {
-				if (flags & SYNC_TRYLOCK) {
-					if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
-						lock_flags |= XFS_IOLOCK_SHARED;
-				} else {
-					xfs_ilock(ip, XFS_IOLOCK_SHARED);
-					lock_flags |= XFS_IOLOCK_SHARED;
-				}
-				if (lock_flags & XFS_IOLOCK_SHARED) {
-					error = xfs_flush_pages(ip, 0, -1,
-							(flags & SYNC_WAIT) ? 0
-								: XFS_B_ASYNC,
-							FI_NONE);
-				}
-			}
-			if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
-				xfs_ioend_wait(ip);
-		}
-		xfs_ilock(ip, XFS_ILOCK_SHARED);
-
-		if ((flags & SYNC_ATTR) && !xfs_inode_clean(ip)) {
-			if (flags & SYNC_WAIT) {
-				xfs_iflock(ip);
-				if (!xfs_inode_clean(ip))
-					error = xfs_iflush(ip, XFS_IFLUSH_SYNC);
-				else
-					xfs_ifunlock(ip);
-			} else if (xfs_iflock_nowait(ip)) {
-				if (!xfs_inode_clean(ip))
-					error = xfs_iflush(ip, XFS_IFLUSH_DELWRI);
-				else
-					xfs_ifunlock(ip);
-			}
-		}
-		xfs_iput(ip, lock_flags);
+		ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag);
+		if (!ip)
+			break;
 
+		error = execute(ip, pag, flags);
+		if (error == EAGAIN) {
+			skipped++;
+			continue;
+		}
 		if (error)
 			last_error = error;
 		/*
 		 * bail out if the filesystem is corrupted.
 		 */
 		if (error == EFSCORRUPTED)
-			return XFS_ERROR(error);
+			break;
 
-	} while (nr_found);
+	} while (1);
+
+	if (skipped) {
+		delay(1);
+		goto restart;
+	}
 
+	xfs_put_perag(mp, pag);
 	return last_error;
 }
 
 int
-xfs_sync_inodes(
-	xfs_mount_t	*mp,
-	int		flags)
+xfs_inode_ag_iterator(
+	struct xfs_mount	*mp,
+	int			(*execute)(struct xfs_inode *ip,
+					   struct xfs_perag *pag, int flags),
+	int			flags,
+	int			tag)
 {
-	int		error;
-	int		last_error;
-	int		i;
-	int		lflags = XFS_LOG_FORCE;
+	int			error = 0;
+	int			last_error = 0;
+	xfs_agnumber_t		ag;
 
-	if (mp->m_flags & XFS_MOUNT_RDONLY)
-		return 0;
-	error = 0;
-	last_error = 0;
+	for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
+		if (!mp->m_perag[ag].pag_ici_init)
+			continue;
+		error = xfs_inode_ag_walk(mp, ag, execute, flags, tag);
+		if (error) {
+			last_error = error;
+			if (error == EFSCORRUPTED)
+				break;
+		}
+	}
+	return XFS_ERROR(last_error);
+}
+
+/* must be called with pag_ici_lock held and releases it */
+int
+xfs_sync_inode_valid(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag)
+{
+	struct inode		*inode = VFS_I(ip);
+
+	/* nothing to sync during shutdown */
+	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+		read_unlock(&pag->pag_ici_lock);
+		return EFSCORRUPTED;
+	}
+
+	/*
+	 * If we can't get a reference on the inode, it must be in reclaim.
+	 * Leave it for the reclaim code to flush. Also avoid inodes that
+	 * haven't been fully initialised.
+	 */
+	if (!igrab(inode)) {
+		read_unlock(&pag->pag_ici_lock);
+		return ENOENT;
+	}
+	read_unlock(&pag->pag_ici_lock);
+
+	if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) {
+		IRELE(ip);
+		return ENOENT;
+	}
+
+	return 0;
+}
+
+STATIC int
+xfs_sync_inode_data(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
+{
+	struct inode		*inode = VFS_I(ip);
+	struct address_space *mapping = inode->i_mapping;
+	int			error = 0;
+
+	error = xfs_sync_inode_valid(ip, pag);
+	if (error)
+		return error;
+
+	if (!mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
+		goto out_wait;
+
+	if (!xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED)) {
+		if (flags & SYNC_TRYLOCK)
+			goto out_wait;
+		xfs_ilock(ip, XFS_IOLOCK_SHARED);
+	}
+
+	error = xfs_flush_pages(ip, 0, -1, (flags & SYNC_WAIT) ?
+				0 : XFS_B_ASYNC, FI_NONE);
+	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
 
+ out_wait:
 	if (flags & SYNC_WAIT)
-		lflags |= XFS_LOG_SYNC;
+		xfs_ioend_wait(ip);
+	IRELE(ip);
+	return error;
+}
 
-	for (i = 0; i < mp->m_sb.sb_agcount; i++) {
-		if (!mp->m_perag[i].pag_ici_init)
-			continue;
-		error = xfs_sync_inodes_ag(mp, i, flags);
-		if (error)
-			last_error = error;
-		if (error == EFSCORRUPTED)
-			break;
+STATIC int
+xfs_sync_inode_attr(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
+{
+	int			error = 0;
+
+	error = xfs_sync_inode_valid(ip, pag);
+	if (error)
+		return error;
+
+	xfs_ilock(ip, XFS_ILOCK_SHARED);
+	if (xfs_inode_clean(ip))
+		goto out_unlock;
+	if (!xfs_iflock_nowait(ip)) {
+		if (!(flags & SYNC_WAIT))
+			goto out_unlock;
+		xfs_iflock(ip);
 	}
-	if (flags & SYNC_DELWRI)
-		xfs_log_force(mp, 0, lflags);
 
-	return XFS_ERROR(last_error);
+	if (xfs_inode_clean(ip)) {
+		xfs_ifunlock(ip);
+		goto out_unlock;
+	}
+
+	error = xfs_iflush(ip, (flags & SYNC_WAIT) ?
+			   XFS_IFLUSH_SYNC : XFS_IFLUSH_DELWRI);
+
+ out_unlock:
+	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+	IRELE(ip);
+	return error;
+}
+
+/*
+ * Write out pagecache data for the whole filesystem.
+ */
+int
+xfs_sync_data(
+	struct xfs_mount	*mp,
+	int			flags)
+{
+	int			error;
+
+	ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
+
+	error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
+				      XFS_ICI_NO_TAG);
+	if (error)
+		return XFS_ERROR(error);
+
+	xfs_log_force(mp, 0,
+		      (flags & SYNC_WAIT) ?
+		       XFS_LOG_FORCE | XFS_LOG_SYNC :
+		       XFS_LOG_FORCE);
+	return 0;
+}
+
+/*
+ * Write out inode metadata (attributes) for the whole filesystem.
+ */
+int
+xfs_sync_attr(
+	struct xfs_mount	*mp,
+	int			flags)
+{
+	ASSERT((flags & ~SYNC_WAIT) == 0);
+
+	return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
+				     XFS_ICI_NO_TAG);
 }
 
 STATIC int
@@ -252,7 +353,7 @@ xfs_sync_fsdata(
 	 * If this is xfssyncd() then only sync the superblock if we can
 	 * lock it without sleeping and it is not pinned.
 	 */
-	if (flags & SYNC_BDFLUSH) {
+	if (flags & SYNC_TRYLOCK) {
 		ASSERT(!(flags & SYNC_WAIT));
 
 		bp = xfs_getsb(mp, XFS_BUF_TRYLOCK);
@@ -316,13 +417,13 @@ xfs_quiesce_data(
 	int error;
 
 	/* push non-blocking */
-	xfs_sync_inodes(mp, SYNC_DELWRI|SYNC_BDFLUSH);
-	XFS_QM_DQSYNC(mp, SYNC_BDFLUSH);
+	xfs_sync_data(mp, 0);
+	xfs_qm_sync(mp, SYNC_TRYLOCK);
 	xfs_filestream_flush(mp);
 
 	/* push and block */
-	xfs_sync_inodes(mp, SYNC_DELWRI|SYNC_WAIT|SYNC_IOWAIT);
-	XFS_QM_DQSYNC(mp, SYNC_WAIT);
+	xfs_sync_data(mp, SYNC_WAIT);
+	xfs_qm_sync(mp, SYNC_WAIT);
 
 	/* write superblock and hoover up shutdown errors */
 	error = xfs_sync_fsdata(mp, 0);
@@ -341,7 +442,7 @@ xfs_quiesce_fs(
 	int	count = 0, pincount;
 
 	xfs_flush_buftarg(mp->m_ddev_targp, 0);
-	xfs_reclaim_inodes(mp, 0, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
+	xfs_reclaim_inodes(mp, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
 
 	/*
 	 * This loop must run at least twice.  The first instance of the loop
@@ -350,7 +451,7 @@ xfs_quiesce_fs(
 	 * logged before we can write the unmount record.
 	 */
 	do {
-		xfs_sync_inodes(mp, SYNC_ATTR|SYNC_WAIT);
+		xfs_sync_attr(mp, SYNC_WAIT);
 		pincount = xfs_flush_buftarg(mp->m_ddev_targp, 1);
 		if (!pincount) {
 			delay(50);
@@ -433,8 +534,8 @@ xfs_flush_inodes_work(
 	void		*arg)
 {
 	struct inode	*inode = arg;
-	xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
-	xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
+	xfs_sync_data(mp, SYNC_TRYLOCK);
+	xfs_sync_data(mp, SYNC_TRYLOCK | SYNC_WAIT);
 	iput(inode);
 }
 
@@ -465,10 +566,10 @@ xfs_sync_worker(
 
 	if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
 		xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE);
-		xfs_reclaim_inodes(mp, 0, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
+		xfs_reclaim_inodes(mp, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
 		/* dgc: errors ignored here */
-		error = XFS_QM_DQSYNC(mp, SYNC_BDFLUSH);
-		error = xfs_sync_fsdata(mp, SYNC_BDFLUSH);
+		error = xfs_qm_sync(mp, SYNC_TRYLOCK);
+		error = xfs_sync_fsdata(mp, SYNC_TRYLOCK);
 		if (xfs_log_need_covered(mp))
 			error = xfs_commit_dummy_trans(mp, XFS_LOG_FORCE);
 	}
@@ -569,7 +670,7 @@ xfs_reclaim_inode(
 			xfs_ifunlock(ip);
 			xfs_iunlock(ip, XFS_ILOCK_EXCL);
 		}
-		return 1;
+		return -EAGAIN;
 	}
 	__xfs_iflags_set(ip, XFS_IRECLAIM);
 	spin_unlock(&ip->i_flags_lock);
@@ -654,101 +755,27 @@ xfs_inode_clear_reclaim_tag(
 	xfs_put_perag(mp, pag);
 }
 
-
-STATIC void
-xfs_reclaim_inodes_ag(
-	xfs_mount_t	*mp,
-	int		ag,
-	int		noblock,
-	int		mode)
+STATIC int
+xfs_reclaim_inode_now(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
 {
-	xfs_inode_t	*ip = NULL;
-	xfs_perag_t	*pag = &mp->m_perag[ag];
-	int		nr_found;
-	uint32_t	first_index;
-	int		skipped;
-
-restart:
-	first_index = 0;
-	skipped = 0;
-	do {
-		/*
-		 * use a gang lookup to find the next inode in the tree
-		 * as the tree is sparse and a gang lookup walks to find
-		 * the number of objects requested.
-		 */
-		read_lock(&pag->pag_ici_lock);
-		nr_found = radix_tree_gang_lookup_tag(&pag->pag_ici_root,
-					(void**)&ip, first_index, 1,
-					XFS_ICI_RECLAIM_TAG);
-
-		if (!nr_found) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/*
-		 * Update the index for the next lookup. Catch overflows
-		 * into the next AG range which can occur if we have inodes
-		 * in the last block of the AG and we are currently
-		 * pointing to the last inode.
-		 */
-		first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
-		if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/* ignore if already under reclaim */
-		if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
-
-		if (noblock) {
-			if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-			if (xfs_ipincount(ip) ||
-			    !xfs_iflock_nowait(ip)) {
-				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-		}
+	/* ignore if already under reclaim */
+	if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
 		read_unlock(&pag->pag_ici_lock);
-
-		/*
-		 * hmmm - this is an inode already in reclaim. Do
-		 * we even bother catching it here?
-		 */
-		if (xfs_reclaim_inode(ip, noblock, mode))
-			skipped++;
-	} while (nr_found);
-
-	if (skipped) {
-		delay(1);
-		goto restart;
+		return 0;
 	}
-	return;
+	read_unlock(&pag->pag_ici_lock);
 
+	return xfs_reclaim_inode(ip, 0, flags);
 }
 
 int
 xfs_reclaim_inodes(
 	xfs_mount_t	*mp,
-	int		 noblock,
 	int		mode)
 {
-	int		i;
-
-	for (i = 0; i < mp->m_sb.sb_agcount; i++) {
-		if (!mp->m_perag[i].pag_ici_init)
-			continue;
-		xfs_reclaim_inodes_ag(mp, i, noblock, mode);
-	}
-	return 0;
+	return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode,
+					XFS_ICI_RECLAIM_TAG);
 }
-
-
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 308d5bf6dfb..2a10301c99c 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -29,17 +29,14 @@ typedef struct xfs_sync_work {
 	struct completion	*w_completion;
 } xfs_sync_work_t;
 
-#define SYNC_ATTR		0x0001	/* sync attributes */
-#define SYNC_DELWRI		0x0002	/* look at delayed writes */
-#define SYNC_WAIT		0x0004	/* wait for i/o to complete */
-#define SYNC_BDFLUSH		0x0008	/* BDFLUSH is calling -- don't block */
-#define SYNC_IOWAIT		0x0010  /* wait for all I/O to complete */
-#define SYNC_TRYLOCK		0x0020  /* only try to lock inodes */
+#define SYNC_WAIT		0x0001	/* wait for i/o to complete */
+#define SYNC_TRYLOCK		0x0002  /* only try to lock inodes */
 
 int xfs_syncd_init(struct xfs_mount *mp);
 void xfs_syncd_stop(struct xfs_mount *mp);
 
-int xfs_sync_inodes(struct xfs_mount *mp, int flags);
+int xfs_sync_attr(struct xfs_mount *mp, int flags);
+int xfs_sync_data(struct xfs_mount *mp, int flags);
 int xfs_sync_fsdata(struct xfs_mount *mp, int flags);
 
 int xfs_quiesce_data(struct xfs_mount *mp);
@@ -48,10 +45,16 @@ void xfs_quiesce_attr(struct xfs_mount *mp);
 void xfs_flush_inodes(struct xfs_inode *ip);
 
 int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
-int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
+int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
 
 void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
 void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
 void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
 				struct xfs_inode *ip);
+
+int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
+int xfs_inode_ag_iterator(struct xfs_mount *mp,
+	int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
+	int flags, int tag);
+
 #endif
diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c
index 964621fde6e..497c7fb75cc 100644
--- a/fs/xfs/linux-2.6/xfs_xattr.c
+++ b/fs/xfs/linux-2.6/xfs_xattr.c
@@ -29,67 +29,6 @@
 #include <linux/xattr.h>
 
 
-/*
- * ACL handling.  Should eventually be moved into xfs_acl.c
- */
-
-static int
-xfs_decode_acl(const char *name)
-{
-	if (strcmp(name, "posix_acl_access") == 0)
-		return _ACL_TYPE_ACCESS;
-	else if (strcmp(name, "posix_acl_default") == 0)
-		return _ACL_TYPE_DEFAULT;
-	return -EINVAL;
-}
-
-/*
- * Get system extended attributes which at the moment only
- * includes Posix ACLs.
- */
-static int
-xfs_xattr_system_get(struct inode *inode, const char *name,
-		void *buffer, size_t size)
-{
-	int acl;
-
-	acl = xfs_decode_acl(name);
-	if (acl < 0)
-		return acl;
-
-	return xfs_acl_vget(inode, buffer, size, acl);
-}
-
-static int
-xfs_xattr_system_set(struct inode *inode, const char *name,
-		const void *value, size_t size, int flags)
-{
-	int acl;
-
-	acl = xfs_decode_acl(name);
-	if (acl < 0)
-		return acl;
-	if (flags & XATTR_CREATE)
-		return -EINVAL;
-
-	if (!value)
-		return xfs_acl_vremove(inode, acl);
-
-	return xfs_acl_vset(inode, (void *)value, size, acl);
-}
-
-static struct xattr_handler xfs_xattr_system_handler = {
-	.prefix	= XATTR_SYSTEM_PREFIX,
-	.get	= xfs_xattr_system_get,
-	.set	= xfs_xattr_system_set,
-};
-
-
-/*
- * Real xattr handling.  The only difference between the namespaces is
- * a flag passed to the low-level attr code.
- */
-
 static int
 __xfs_xattr_get(struct inode *inode, const char *name,
 		void *value, size_t size, int xflags)
@@ -199,7 +138,9 @@ struct xattr_handler *xfs_xattr_handlers[] = {
 	&xfs_xattr_user_handler,
 	&xfs_xattr_trusted_handler,
 	&xfs_xattr_security_handler,
+#ifdef CONFIG_XFS_POSIX_ACL
 	&xfs_xattr_system_handler,
+#endif
 	NULL
 };
 
@@ -310,7 +251,7 @@ xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size)
 	/*
 	 * Then add the two synthetic ACL attributes.
 	 */
-	if (xfs_acl_vhasacl_access(inode)) {
+	if (posix_acl_access_exists(inode)) {
 		error = list_one_attr(POSIX_ACL_XATTR_ACCESS,
 				strlen(POSIX_ACL_XATTR_ACCESS) + 1,
 				data, size, &context.count);
@@ -318,7 +259,7 @@ xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size)
 			return error;
 	}
 
-	if (xfs_acl_vhasacl_default(inode)) {
+	if (posix_acl_default_exists(inode)) {
 		error = list_one_attr(POSIX_ACL_XATTR_DEFAULT,
 				strlen(POSIX_ACL_XATTR_DEFAULT) + 1,
 				data, size, &context.count);
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index e4babcc6342..2f3f2229eaa 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -1194,7 +1193,9 @@ void
 xfs_qm_dqrele(
 	xfs_dquot_t	*dqp)
 {
-	ASSERT(dqp);
+	if (!dqp)
+		return;
+
 	xfs_dqtrace_entry(dqp, "DQRELE");
 
 	xfs_dqlock(dqp);
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index de0f402ddb4..6533ead9b88 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -181,7 +181,6 @@ extern void		xfs_qm_adjust_dqlimits(xfs_mount_t *,
 extern int		xfs_qm_dqget(xfs_mount_t *, xfs_inode_t *,
 					xfs_dqid_t, uint, uint, xfs_dquot_t **);
 extern void		xfs_qm_dqput(xfs_dquot_t *);
-extern void		xfs_qm_dqrele(xfs_dquot_t *);
 extern void		xfs_dqlock(xfs_dquot_t *);
 extern void		xfs_dqlock2(xfs_dquot_t *, xfs_dquot_t *);
 extern void		xfs_dqunlock(xfs_dquot_t *);
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 1728f6a7c4f..d0d4a9a0bbd 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 5b6695049e0..45b1bfef738 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_bmap.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -287,11 +286,13 @@ xfs_qm_rele_quotafs_ref(
  * Just destroy the quotainfo structure.
  */
 void
-xfs_qm_unmount_quotadestroy(
-	xfs_mount_t	*mp)
+xfs_qm_unmount(
+	struct xfs_mount	*mp)
 {
-	if (mp->m_quotainfo)
+	if (mp->m_quotainfo) {
+		xfs_qm_dqpurge_all(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_UMOUNTING);
 		xfs_qm_destroy_quotainfo(mp);
+	}
 }
 
 
@@ -385,8 +386,13 @@ xfs_qm_mount_quotas(
 	if (error) {
 		xfs_fs_cmn_err(CE_WARN, mp,
 			"Failed to initialize disk quotas.");
+		return;
 	}
-	return;
+
+#ifdef QUOTADEBUG
+	if (XFS_IS_QUOTA_ON(mp))
+		xfs_qm_internalqcheck(mp);
+#endif
 }
 
 /*
@@ -774,12 +780,11 @@ xfs_qm_dqattach_grouphint(
  * Given a locked inode, attach dquot(s) to it, taking U/G/P-QUOTAON
  * into account.
  * If XFS_QMOPT_DQALLOC, the dquot(s) will be allocated if needed.
- * If XFS_QMOPT_ILOCKED, then inode sent is already locked EXCL.
  * Inode may get unlocked and relocked in here, and the caller must deal with
  * the consequences.
  */
 int
-xfs_qm_dqattach(
+xfs_qm_dqattach_locked(
 	xfs_inode_t	*ip,
 	uint		flags)
 {
@@ -787,17 +792,14 @@ xfs_qm_dqattach(
 	uint		nquotas = 0;
 	int		error = 0;
 
-	if ((! XFS_IS_QUOTA_ON(mp)) ||
-	    (! XFS_NOT_DQATTACHED(mp, ip)) ||
-	    (ip->i_ino == mp->m_sb.sb_uquotino) ||
-	    (ip->i_ino == mp->m_sb.sb_gquotino))
+	if (!XFS_IS_QUOTA_RUNNING(mp) ||
+	    !XFS_IS_QUOTA_ON(mp) ||
+	    !XFS_NOT_DQATTACHED(mp, ip) ||
+	    ip->i_ino == mp->m_sb.sb_uquotino ||
+	    ip->i_ino == mp->m_sb.sb_gquotino)
 		return 0;
 
-	ASSERT((flags & XFS_QMOPT_ILOCKED) == 0 ||
-	       xfs_isilocked(ip, XFS_ILOCK_EXCL));
-
-	if (! (flags & XFS_QMOPT_ILOCKED))
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 
 	if (XFS_IS_UQUOTA_ON(mp)) {
 		error = xfs_qm_dqattach_one(ip, ip->i_d.di_uid, XFS_DQ_USER,
@@ -849,8 +851,7 @@ xfs_qm_dqattach(
 		xfs_qm_dqattach_grouphint(ip->i_udquot, ip->i_gdquot);
 	}
 
-      done:
-
+ done:
 #ifdef QUOTADEBUG
 	if (! error) {
 		if (XFS_IS_UQUOTA_ON(mp))
@@ -858,15 +859,22 @@ xfs_qm_dqattach(
 		if (XFS_IS_OQUOTA_ON(mp))
 			ASSERT(ip->i_gdquot);
 	}
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 #endif
+	return error;
+}
 
-	if (! (flags & XFS_QMOPT_ILOCKED))
-		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+int
+xfs_qm_dqattach(
+	struct xfs_inode	*ip,
+	uint			flags)
+{
+	int			error;
+
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	error = xfs_qm_dqattach_locked(ip, flags);
+	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
-#ifdef QUOTADEBUG
-	else
-		ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-#endif
 	return error;
 }
 
@@ -896,11 +904,6 @@ xfs_qm_dqdetach(
 	}
 }
 
-/*
- * This is called to sync quotas. We can be told to use non-blocking
- * semantics by either the SYNC_BDFLUSH flag or the absence of the
- * SYNC_WAIT flag.
- */
 int
 xfs_qm_sync(
 	xfs_mount_t	*mp,
@@ -909,17 +912,13 @@ xfs_qm_sync(
 	int		recl, restarts;
 	xfs_dquot_t	*dqp;
 	uint		flush_flags;
-	boolean_t	nowait;
 	int		error;
 
-	if (! XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
+	flush_flags = (flags & SYNC_WAIT) ? XFS_QMOPT_SYNC : XFS_QMOPT_DELWRI;
 	restarts = 0;
-	/*
-	 * We won't block unless we are asked to.
-	 */
-	nowait = (boolean_t)(flags & SYNC_BDFLUSH || (flags & SYNC_WAIT) == 0);
 
   again:
 	xfs_qm_mplist_lock(mp);
@@ -939,18 +938,10 @@ xfs_qm_sync(
 		 * don't 'seem' to be dirty. ie. don't acquire dqlock.
 		 * This is very similar to what xfs_sync does with inodes.
 		 */
-		if (flags & SYNC_BDFLUSH) {
-			if (! XFS_DQ_IS_DIRTY(dqp))
+		if (flags & SYNC_TRYLOCK) {
+			if (!XFS_DQ_IS_DIRTY(dqp))
 				continue;
-		}
-
-		if (nowait) {
-			/*
-			 * Try to acquire the dquot lock. We are NOT out of
-			 * lock order, but we just don't want to wait for this
-			 * lock, unless somebody wanted us to.
-			 */
-			if (! xfs_qm_dqlock_nowait(dqp))
+			if (!xfs_qm_dqlock_nowait(dqp))
 				continue;
 		} else {
 			xfs_dqlock(dqp);
@@ -967,7 +958,7 @@ xfs_qm_sync(
 		/* XXX a sentinel would be better */
 		recl = XFS_QI_MPLRECLAIMS(mp);
 		if (!xfs_dqflock_nowait(dqp)) {
-			if (nowait) {
+			if (flags & SYNC_TRYLOCK) {
 				xfs_dqunlock(dqp);
 				continue;
 			}
@@ -985,7 +976,6 @@ xfs_qm_sync(
 		 * Let go of the mplist lock. We don't want to hold it
 		 * across a disk write
 		 */
-		flush_flags = (nowait) ? XFS_QMOPT_DELWRI : XFS_QMOPT_SYNC;
 		xfs_qm_mplist_unlock(mp);
 		xfs_dqtrace_entry(dqp, "XQM_SYNC: DQFLUSH");
 		error = xfs_qm_dqflush(dqp, flush_flags);
@@ -2319,20 +2309,20 @@ xfs_qm_write_sb_changes(
  */
 int
 xfs_qm_vop_dqalloc(
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip,
-	uid_t		uid,
-	gid_t		gid,
-	prid_t		prid,
-	uint		flags,
-	xfs_dquot_t	**O_udqpp,
-	xfs_dquot_t	**O_gdqpp)
+	struct xfs_inode	*ip,
+	uid_t			uid,
+	gid_t			gid,
+	prid_t			prid,
+	uint			flags,
+	struct xfs_dquot	**O_udqpp,
+	struct xfs_dquot	**O_gdqpp)
 {
-	int		error;
-	xfs_dquot_t	*uq, *gq;
-	uint		lockflags;
+	struct xfs_mount	*mp = ip->i_mount;
+	struct xfs_dquot	*uq, *gq;
+	int			error;
+	uint			lockflags;
 
-	if (!XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
 	lockflags = XFS_ILOCK_EXCL;
@@ -2346,8 +2336,8 @@ xfs_qm_vop_dqalloc(
 	 * if necessary. The dquot(s) will not be locked.
 	 */
 	if (XFS_NOT_DQATTACHED(mp, ip)) {
-		if ((error = xfs_qm_dqattach(ip, XFS_QMOPT_DQALLOC |
-					    XFS_QMOPT_ILOCKED))) {
+		error = xfs_qm_dqattach_locked(ip, XFS_QMOPT_DQALLOC);
+		if (error) {
 			xfs_iunlock(ip, lockflags);
 			return error;
 		}
@@ -2469,6 +2459,7 @@ xfs_qm_vop_chown(
 	uint		bfield = XFS_IS_REALTIME_INODE(ip) ?
 				 XFS_TRANS_DQ_RTBCOUNT : XFS_TRANS_DQ_BCOUNT;
 
+
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 	ASSERT(XFS_IS_QUOTA_RUNNING(ip->i_mount));
 
@@ -2508,13 +2499,13 @@ xfs_qm_vop_chown_reserve(
 	xfs_dquot_t	*gdqp,
 	uint		flags)
 {
-	int		error;
-	xfs_mount_t	*mp;
+	xfs_mount_t	*mp = ip->i_mount;
 	uint		delblks, blkflags, prjflags = 0;
 	xfs_dquot_t	*unresudq, *unresgdq, *delblksudq, *delblksgdq;
+	int		error;
+
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
-	mp = ip->i_mount;
 	ASSERT(XFS_IS_QUOTA_RUNNING(mp));
 
 	delblks = ip->i_delayed_blks;
@@ -2582,28 +2573,23 @@ xfs_qm_vop_chown_reserve(
 
 int
 xfs_qm_vop_rename_dqattach(
-	xfs_inode_t	**i_tab)
+	struct xfs_inode	**i_tab)
 {
-	xfs_inode_t	*ip;
-	int		i;
-	int		error;
+	struct xfs_mount	*mp = i_tab[0]->i_mount;
+	int			i;
 
-	ip = i_tab[0];
-
-	if (! XFS_IS_QUOTA_ON(ip->i_mount))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
-	if (XFS_NOT_DQATTACHED(ip->i_mount, ip)) {
-		error = xfs_qm_dqattach(ip, 0);
-		if (error)
-			return error;
-	}
-	for (i = 1; (i < 4 && i_tab[i]); i++) {
+	for (i = 0; (i < 4 && i_tab[i]); i++) {
+		struct xfs_inode	*ip = i_tab[i];
+		int			error;
+
 		/*
 		 * Watch out for duplicate entries in the table.
 		 */
-		if ((ip = i_tab[i]) != i_tab[i-1]) {
-			if (XFS_NOT_DQATTACHED(ip->i_mount, ip)) {
+		if (i == 0 || ip != i_tab[i-1]) {
+			if (XFS_NOT_DQATTACHED(mp, ip)) {
 				error = xfs_qm_dqattach(ip, 0);
 				if (error)
 					return error;
@@ -2614,17 +2600,19 @@ xfs_qm_vop_rename_dqattach(
 }
 
 void
-xfs_qm_vop_dqattach_and_dqmod_newinode(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip,
-	xfs_dquot_t	*udqp,
-	xfs_dquot_t	*gdqp)
+xfs_qm_vop_create_dqattach(
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip,
+	struct xfs_dquot	*udqp,
+	struct xfs_dquot	*gdqp)
 {
-	if (!XFS_IS_QUOTA_ON(tp->t_mountp))
+	struct xfs_mount	*mp = tp->t_mountp;
+
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(XFS_IS_QUOTA_RUNNING(tp->t_mountp));
+	ASSERT(XFS_IS_QUOTA_RUNNING(mp));
 
 	if (udqp) {
 		xfs_dqlock(udqp);
@@ -2632,7 +2620,7 @@ xfs_qm_vop_dqattach_and_dqmod_newinode(
 		xfs_dqunlock(udqp);
 		ASSERT(ip->i_udquot == NULL);
 		ip->i_udquot = udqp;
-		ASSERT(XFS_IS_UQUOTA_ON(tp->t_mountp));
+		ASSERT(XFS_IS_UQUOTA_ON(mp));
 		ASSERT(ip->i_d.di_uid == be32_to_cpu(udqp->q_core.d_id));
 		xfs_trans_mod_dquot(tp, udqp, XFS_TRANS_DQ_ICOUNT, 1);
 	}
@@ -2642,8 +2630,8 @@ xfs_qm_vop_dqattach_and_dqmod_newinode(
 		xfs_dqunlock(gdqp);
 		ASSERT(ip->i_gdquot == NULL);
 		ip->i_gdquot = gdqp;
-		ASSERT(XFS_IS_OQUOTA_ON(tp->t_mountp));
-		ASSERT((XFS_IS_GQUOTA_ON(tp->t_mountp) ?
+		ASSERT(XFS_IS_OQUOTA_ON(mp));
+		ASSERT((XFS_IS_GQUOTA_ON(mp) ?
 			ip->i_d.di_gid : ip->i_d.di_projid) ==
 				be32_to_cpu(gdqp->q_core.d_id));
 		xfs_trans_mod_dquot(tp, gdqp, XFS_TRANS_DQ_ICOUNT, 1);
diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/quota/xfs_qm.h
index a371954cae1..495564b8af3 100644
--- a/fs/xfs/quota/xfs_qm.h
+++ b/fs/xfs/quota/xfs_qm.h
@@ -127,8 +127,6 @@ typedef struct xfs_quotainfo {
 } xfs_quotainfo_t;
 
 
-extern xfs_dqtrxops_t	xfs_trans_dquot_ops;
-
 extern void	xfs_trans_mod_dquot(xfs_trans_t *, xfs_dquot_t *, uint, long);
 extern int	xfs_trans_reserve_quota_bydquots(xfs_trans_t *, xfs_mount_t *,
 			xfs_dquot_t *, xfs_dquot_t *, long, long, uint);
@@ -159,17 +157,11 @@ typedef struct xfs_dquot_acct {
 #define XFS_QM_RTBWARNLIMIT	5
 
 extern void		xfs_qm_destroy_quotainfo(xfs_mount_t *);
-extern void		xfs_qm_mount_quotas(xfs_mount_t *);
 extern int		xfs_qm_quotacheck(xfs_mount_t *);
-extern void		xfs_qm_unmount_quotadestroy(xfs_mount_t *);
-extern void		xfs_qm_unmount_quotas(xfs_mount_t *);
 extern int		xfs_qm_write_sb_changes(xfs_mount_t *, __int64_t);
-extern int		xfs_qm_sync(xfs_mount_t *, int);
 
 /* dquot stuff */
 extern boolean_t	xfs_qm_dqalloc_incore(xfs_dquot_t **);
-extern int		xfs_qm_dqattach(xfs_inode_t *, uint);
-extern void		xfs_qm_dqdetach(xfs_inode_t *);
 extern int		xfs_qm_dqpurge_all(xfs_mount_t *, uint);
 extern void		xfs_qm_dqrele_all_inodes(xfs_mount_t *, uint);
 
@@ -183,19 +175,6 @@ extern int		xfs_qm_scall_getqstat(xfs_mount_t *, fs_quota_stat_t *);
 extern int		xfs_qm_scall_quotaon(xfs_mount_t *, uint);
 extern int		xfs_qm_scall_quotaoff(xfs_mount_t *, uint);
 
-/* vop stuff */
-extern int		xfs_qm_vop_dqalloc(xfs_mount_t *, xfs_inode_t *,
-					uid_t, gid_t, prid_t, uint,
-					xfs_dquot_t **, xfs_dquot_t **);
-extern void		xfs_qm_vop_dqattach_and_dqmod_newinode(
-					xfs_trans_t *, xfs_inode_t *,
-					xfs_dquot_t *, xfs_dquot_t *);
-extern int		xfs_qm_vop_rename_dqattach(xfs_inode_t **);
-extern xfs_dquot_t *	xfs_qm_vop_chown(xfs_trans_t *, xfs_inode_t *,
-					xfs_dquot_t **, xfs_dquot_t *);
-extern int		xfs_qm_vop_chown_reserve(xfs_trans_t *, xfs_inode_t *,
-					xfs_dquot_t *, xfs_dquot_t *, uint);
-
 /* list stuff */
 extern void		xfs_qm_freelist_append(xfs_frlist_t *, xfs_dquot_t *);
 extern void		xfs_qm_freelist_unlink(xfs_dquot_t *);
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 63037c689a4..a5346630dfa 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -42,7 +42,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
@@ -84,7 +83,7 @@ xfs_fill_statvfs_from_dquot(
  * return a statvfs of the project, not the entire filesystem.
  * This makes such trees appear as if they are filesystems in themselves.
  */
-STATIC void
+void
 xfs_qm_statvfs(
 	xfs_inode_t		*ip,
 	struct kstatfs		*statp)
@@ -92,20 +91,13 @@ xfs_qm_statvfs(
 	xfs_mount_t		*mp = ip->i_mount;
 	xfs_dquot_t		*dqp;
 
-	if (!(ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) ||
-	    !((mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))) ==
-	    		      (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
-		return;
-
 	if (!xfs_qm_dqget(mp, NULL, ip->i_d.di_projid, XFS_DQ_PROJ, 0, &dqp)) {
-		xfs_disk_dquot_t	*dp = &dqp->q_core;
-
-		xfs_fill_statvfs_from_dquot(statp, dp);
+		xfs_fill_statvfs_from_dquot(statp, &dqp->q_core);
 		xfs_qm_dqput(dqp);
 	}
 }
 
-STATIC int
+int
 xfs_qm_newmount(
 	xfs_mount_t	*mp,
 	uint		*needquotamount,
@@ -114,9 +106,6 @@ xfs_qm_newmount(
 	uint		quotaondisk;
 	uint		uquotaondisk = 0, gquotaondisk = 0, pquotaondisk = 0;
 
-	*quotaflags = 0;
-	*needquotamount = B_FALSE;
-
 	quotaondisk = xfs_sb_version_hasquota(&mp->m_sb) &&
 				(mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT);
 
@@ -179,66 +168,6 @@ xfs_qm_newmount(
 	return 0;
 }
 
-STATIC int
-xfs_qm_endmount(
-	xfs_mount_t	*mp,
-	uint		needquotamount,
-	uint		quotaflags)
-{
-	if (needquotamount) {
-		ASSERT(mp->m_qflags == 0);
-		mp->m_qflags = quotaflags;
-		xfs_qm_mount_quotas(mp);
-	}
-
-#if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
-	if (! (XFS_IS_QUOTA_ON(mp)))
-		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas not turned on");
-	else
-		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas turned on");
-#endif
-
-#ifdef QUOTADEBUG
-	if (XFS_IS_QUOTA_ON(mp) && xfs_qm_internalqcheck(mp))
-		cmn_err(CE_WARN, "XFS: mount internalqcheck failed");
-#endif
-
-	return 0;
-}
-
-STATIC void
-xfs_qm_dqrele_null(
-	xfs_dquot_t	*dq)
-{
-	/*
-	 * Called from XFS, where we always check first for a NULL dquot.
-	 */
-	if (!dq)
-		return;
-	xfs_qm_dqrele(dq);
-}
-
-
-struct xfs_qmops xfs_qmcore_xfs = {
-	.xfs_qminit		= xfs_qm_newmount,
-	.xfs_qmdone		= xfs_qm_unmount_quotadestroy,
-	.xfs_qmmount		= xfs_qm_endmount,
-	.xfs_qmunmount		= xfs_qm_unmount_quotas,
-	.xfs_dqrele		= xfs_qm_dqrele_null,
-	.xfs_dqattach		= xfs_qm_dqattach,
-	.xfs_dqdetach		= xfs_qm_dqdetach,
-	.xfs_dqpurgeall		= xfs_qm_dqpurge_all,
-	.xfs_dqvopalloc		= xfs_qm_vop_dqalloc,
-	.xfs_dqvopcreate	= xfs_qm_vop_dqattach_and_dqmod_newinode,
-	.xfs_dqvoprename	= xfs_qm_vop_rename_dqattach,
-	.xfs_dqvopchown		= xfs_qm_vop_chown,
-	.xfs_dqvopchownresv	= xfs_qm_vop_chown_reserve,
-	.xfs_dqstatvfs		= xfs_qm_statvfs,
-	.xfs_dqsync		= xfs_qm_sync,
-	.xfs_dqtrxops		= &xfs_trans_dquot_ops,
-};
-EXPORT_SYMBOL(xfs_qmcore_xfs);
-
 void __init
 xfs_qm_init(void)
 {
diff --git a/fs/xfs/quota/xfs_qm_stats.c b/fs/xfs/quota/xfs_qm_stats.c
index 709f5f545cf..21b08c0396a 100644
--- a/fs/xfs/quota/xfs_qm_stats.c
+++ b/fs/xfs/quota/xfs_qm_stats.c
@@ -42,7 +42,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index c7b66f6506c..4e4276b956e 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -45,7 +45,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -847,105 +846,55 @@ xfs_qm_export_flags(
 }
 
 
-/*
- * Release all the dquots on the inodes in an AG.
- */
-STATIC void
-xfs_qm_dqrele_inodes_ag(
-	xfs_mount_t	*mp,
-	int		ag,
-	uint		flags)
+STATIC int
+xfs_dqrele_inode(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
 {
-	xfs_inode_t	*ip = NULL;
-	xfs_perag_t	*pag = &mp->m_perag[ag];
-	int		first_index = 0;
-	int		nr_found;
-
-	do {
-		/*
-		 * use a gang lookup to find the next inode in the tree
-		 * as the tree is sparse and a gang lookup walks to find
-		 * the number of objects requested.
-		 */
-		read_lock(&pag->pag_ici_lock);
-		nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
-				(void**)&ip, first_index, 1);
-
-		if (!nr_found) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/*
-		 * Update the index for the next lookup. Catch overflows
-		 * into the next AG range which can occur if we have inodes
-		 * in the last block of the AG and we are currently
-		 * pointing to the last inode.
-		 */
-		first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
-		if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/* skip quota inodes */
-		if (ip == XFS_QI_UQIP(mp) || ip == XFS_QI_GQIP(mp)) {
-			ASSERT(ip->i_udquot == NULL);
-			ASSERT(ip->i_gdquot == NULL);
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
+	int			error;
 
-		/*
-		 * If we can't get a reference on the inode, it must be
-		 * in reclaim. Leave it for the reclaim code to flush.
-		 */
-		if (!igrab(VFS_I(ip))) {
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
+	/* skip quota inodes */
+	if (ip == XFS_QI_UQIP(ip->i_mount) || ip == XFS_QI_GQIP(ip->i_mount)) {
+		ASSERT(ip->i_udquot == NULL);
+		ASSERT(ip->i_gdquot == NULL);
 		read_unlock(&pag->pag_ici_lock);
+		return 0;
+	}
 
-		/* avoid new inodes though we shouldn't find any here */
-		if (xfs_iflags_test(ip, XFS_INEW)) {
-			IRELE(ip);
-			continue;
-		}
+	error = xfs_sync_inode_valid(ip, pag);
+	if (error)
+		return error;
 
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		if ((flags & XFS_UQUOTA_ACCT) && ip->i_udquot) {
-			xfs_qm_dqrele(ip->i_udquot);
-			ip->i_udquot = NULL;
-		}
-		if (flags & (XFS_PQUOTA_ACCT|XFS_GQUOTA_ACCT) &&
-		    ip->i_gdquot) {
-			xfs_qm_dqrele(ip->i_gdquot);
-			ip->i_gdquot = NULL;
-		}
-		xfs_iput(ip, XFS_ILOCK_EXCL);
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	if ((flags & XFS_UQUOTA_ACCT) && ip->i_udquot) {
+		xfs_qm_dqrele(ip->i_udquot);
+		ip->i_udquot = NULL;
+	}
+	if (flags & (XFS_PQUOTA_ACCT|XFS_GQUOTA_ACCT) && ip->i_gdquot) {
+		xfs_qm_dqrele(ip->i_gdquot);
+		ip->i_gdquot = NULL;
+	}
+	xfs_iput(ip, XFS_ILOCK_EXCL);
+	IRELE(ip);
 
-	} while (nr_found);
+	return 0;
 }
 
+
 /*
  * Go thru all the inodes in the file system, releasing their dquots.
+ *
  * Note that the mount structure gets modified to indicate that quotas are off
- * AFTER this, in the case of quotaoff. This also gets called from
- * xfs_rootumount.
+ * AFTER this, in the case of quotaoff.
  */
 void
 xfs_qm_dqrele_all_inodes(
 	struct xfs_mount *mp,
 	uint		 flags)
 {
-	int		i;
-
 	ASSERT(mp->m_quotainfo);
-	for (i = 0; i < mp->m_sb.sb_agcount; i++) {
-		if (!mp->m_perag[i].pag_ici_init)
-			continue;
-		xfs_qm_dqrele_inodes_ag(mp, i, flags);
-	}
+	xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG);
 }
 
 /*------------------------------------------------------------------------*/
diff --git a/fs/xfs/quota/xfs_trans_dquot.c b/fs/xfs/quota/xfs_trans_dquot.c
index 447173bcf96..97ac9640be9 100644
--- a/fs/xfs/quota/xfs_trans_dquot.c
+++ b/fs/xfs/quota/xfs_trans_dquot.c
@@ -42,7 +42,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
@@ -111,7 +110,7 @@ xfs_trans_log_dquot(
  * Carry forward whatever is left of the quota blk reservation to
  * the spanky new transaction
  */
-STATIC void
+void
 xfs_trans_dup_dqinfo(
 	xfs_trans_t	*otp,
 	xfs_trans_t	*ntp)
@@ -167,19 +166,17 @@ xfs_trans_dup_dqinfo(
 /*
  * Wrap around mod_dquot to account for both user and group quotas.
  */
-STATIC void
+void
 xfs_trans_mod_dquot_byino(
 	xfs_trans_t	*tp,
 	xfs_inode_t	*ip,
 	uint		field,
 	long		delta)
 {
-	xfs_mount_t	*mp;
-
-	ASSERT(tp);
-	mp = tp->t_mountp;
+	xfs_mount_t	*mp = tp->t_mountp;
 
-	if (!XFS_IS_QUOTA_ON(mp) ||
+	if (!XFS_IS_QUOTA_RUNNING(mp) ||
+	    !XFS_IS_QUOTA_ON(mp) ||
 	    ip->i_ino == mp->m_sb.sb_uquotino ||
 	    ip->i_ino == mp->m_sb.sb_gquotino)
 		return;
@@ -229,6 +226,7 @@ xfs_trans_mod_dquot(
 	xfs_dqtrx_t	*qtrx;
 
 	ASSERT(tp);
+	ASSERT(XFS_IS_QUOTA_RUNNING(tp->t_mountp));
 	qtrx = NULL;
 
 	if (tp->t_dqinfo == NULL)
@@ -346,7 +344,7 @@ xfs_trans_dqlockedjoin(
  * Unreserve just the reservations done by this transaction.
  * dquot is still left locked at exit.
  */
-STATIC void
+void
 xfs_trans_apply_dquot_deltas(
 	xfs_trans_t		*tp)
 {
@@ -357,7 +355,7 @@ xfs_trans_apply_dquot_deltas(
 	long			totalbdelta;
 	long			totalrtbdelta;
 
-	if (! (tp->t_flags & XFS_TRANS_DQ_DIRTY))
+	if (!(tp->t_flags & XFS_TRANS_DQ_DIRTY))
 		return;
 
 	ASSERT(tp->t_dqinfo);
@@ -531,7 +529,7 @@ xfs_trans_apply_dquot_deltas(
  * we simply throw those away, since that's the expected behavior
  * when a transaction is curtailed without a commit.
  */
-STATIC void
+void
 xfs_trans_unreserve_and_mod_dquots(
 	xfs_trans_t		*tp)
 {
@@ -768,7 +766,7 @@ xfs_trans_reserve_quota_bydquots(
 {
 	int		resvd = 0, error;
 
-	if (!XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
 	if (tp && tp->t_dqinfo == NULL)
@@ -811,18 +809,17 @@ xfs_trans_reserve_quota_bydquots(
  * This doesn't change the actual usage, just the reservation.
  * The inode sent in is locked.
  */
-STATIC int
+int
 xfs_trans_reserve_quota_nblks(
-	xfs_trans_t	*tp,
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip,
-	long		nblks,
-	long		ninos,
-	uint		flags)
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip,
+	long			nblks,
+	long			ninos,
+	uint			flags)
 {
-	int		error;
+	struct xfs_mount	*mp = ip->i_mount;
 
-	if (!XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 	if (XFS_IS_PQUOTA_ON(mp))
 		flags |= XFS_QMOPT_ENOSPC;
@@ -831,7 +828,6 @@ xfs_trans_reserve_quota_nblks(
 	ASSERT(ip->i_ino != mp->m_sb.sb_gquotino);
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(XFS_IS_QUOTA_RUNNING(ip->i_mount));
 	ASSERT((flags & ~(XFS_QMOPT_FORCE_RES | XFS_QMOPT_ENOSPC)) ==
 				XFS_TRANS_DQ_RES_RTBLKS ||
 	       (flags & ~(XFS_QMOPT_FORCE_RES | XFS_QMOPT_ENOSPC)) ==
@@ -840,11 +836,9 @@ xfs_trans_reserve_quota_nblks(
 	/*
 	 * Reserve nblks against these dquots, with trans as the mediator.
 	 */
-	error = xfs_trans_reserve_quota_bydquots(tp, mp,
-						 ip->i_udquot, ip->i_gdquot,
-						 nblks, ninos,
-						 flags);
-	return error;
+	return xfs_trans_reserve_quota_bydquots(tp, mp,
+						ip->i_udquot, ip->i_gdquot,
+						nblks, ninos, flags);
 }
 
 /*
@@ -895,25 +889,15 @@ STATIC void
 xfs_trans_alloc_dqinfo(
 	xfs_trans_t	*tp)
 {
-	(tp)->t_dqinfo = kmem_zone_zalloc(xfs_Gqm->qm_dqtrxzone, KM_SLEEP);
+	tp->t_dqinfo = kmem_zone_zalloc(xfs_Gqm->qm_dqtrxzone, KM_SLEEP);
 }
 
-STATIC void
+void
 xfs_trans_free_dqinfo(
 	xfs_trans_t	*tp)
 {
 	if (!tp->t_dqinfo)
 		return;
-	kmem_zone_free(xfs_Gqm->qm_dqtrxzone, (tp)->t_dqinfo);
-	(tp)->t_dqinfo = NULL;
+	kmem_zone_free(xfs_Gqm->qm_dqtrxzone, tp->t_dqinfo);
+	tp->t_dqinfo = NULL;
 }
-
-xfs_dqtrxops_t	xfs_trans_dquot_ops = {
-	.qo_dup_dqinfo			= xfs_trans_dup_dqinfo,
-	.qo_free_dqinfo			= xfs_trans_free_dqinfo,
-	.qo_mod_dquot_byino		= xfs_trans_mod_dquot_byino,
-	.qo_apply_dquot_deltas		= xfs_trans_apply_dquot_deltas,
-	.qo_reserve_quota_nblks		= xfs_trans_reserve_quota_nblks,
-	.qo_reserve_quota_bydquots	= xfs_trans_reserve_quota_bydquots,
-	.qo_unreserve_and_mod_dquots	= xfs_trans_unreserve_and_mod_dquots,
-};
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
deleted file mode 100644
index a8cdd73999a..00000000000
--- a/fs/xfs/xfs_acl.c
+++ /dev/null
@@ -1,874 +0,0 @@
-/*
- * Copyright (c) 2001-2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_bit.h"
-#include "xfs_inum.h"
-#include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
-#include "xfs_inode.h"
-#include "xfs_btree.h"
-#include "xfs_acl.h"
-#include "xfs_attr.h"
-#include "xfs_vnodeops.h"
-
-#include <linux/capability.h>
-#include <linux/posix_acl_xattr.h>
-
-STATIC int	xfs_acl_setmode(struct inode *, xfs_acl_t *, int *);
-STATIC void     xfs_acl_filter_mode(mode_t, xfs_acl_t *);
-STATIC void	xfs_acl_get_endian(xfs_acl_t *);
-STATIC int	xfs_acl_access(uid_t, gid_t, xfs_acl_t *, mode_t, cred_t *);
-STATIC int	xfs_acl_invalid(xfs_acl_t *);
-STATIC void	xfs_acl_sync_mode(mode_t, xfs_acl_t *);
-STATIC void	xfs_acl_get_attr(struct inode *, xfs_acl_t *, int, int, int *);
-STATIC void	xfs_acl_set_attr(struct inode *, xfs_acl_t *, int, int *);
-STATIC int	xfs_acl_allow_set(struct inode *, int);
-
-kmem_zone_t *xfs_acl_zone;
-
-
-/*
- * Test for existence of access ACL attribute as efficiently as possible.
- */
-int
-xfs_acl_vhasacl_access(
-	struct inode	*vp)
-{
-	int		error;
-
-	xfs_acl_get_attr(vp, NULL, _ACL_TYPE_ACCESS, ATTR_KERNOVAL, &error);
-	return (error == 0);
-}
-
-/*
- * Test for existence of default ACL attribute as efficiently as possible.
- */
-int
-xfs_acl_vhasacl_default(
-	struct inode	*vp)
-{
-	int		error;
-
-	if (!S_ISDIR(vp->i_mode))
-		return 0;
-	xfs_acl_get_attr(vp, NULL, _ACL_TYPE_DEFAULT, ATTR_KERNOVAL, &error);
-	return (error == 0);
-}
-
-/*
- * Convert from extended attribute representation to in-memory for XFS.
- */
-STATIC int
-posix_acl_xattr_to_xfs(
-	posix_acl_xattr_header	*src,
-	size_t			size,
-	xfs_acl_t		*dest)
-{
-	posix_acl_xattr_entry	*src_entry;
-	xfs_acl_entry_t		*dest_entry;
-	int			n;
-
-	if (!src || !dest)
-		return EINVAL;
-
-	if (size < sizeof(posix_acl_xattr_header))
-		return EINVAL;
-
-	if (src->a_version != cpu_to_le32(POSIX_ACL_XATTR_VERSION))
-		return EOPNOTSUPP;
-
-	memset(dest, 0, sizeof(xfs_acl_t));
-	dest->acl_cnt = posix_acl_xattr_count(size);
-	if (dest->acl_cnt < 0 || dest->acl_cnt > XFS_ACL_MAX_ENTRIES)
-		return EINVAL;
-
-	/*
-	 * acl_set_file(3) may request that we set default ACLs with
-	 * zero length -- defend (gracefully) against that here.
-	 */
-	if (!dest->acl_cnt)
-		return 0;
-
-	src_entry = (posix_acl_xattr_entry *)((char *)src + sizeof(*src));
-	dest_entry = &dest->acl_entry[0];
-
-	for (n = 0; n < dest->acl_cnt; n++, src_entry++, dest_entry++) {
-		dest_entry->ae_perm = le16_to_cpu(src_entry->e_perm);
-		if (_ACL_PERM_INVALID(dest_entry->ae_perm))
-			return EINVAL;
-		dest_entry->ae_tag  = le16_to_cpu(src_entry->e_tag);
-		switch(dest_entry->ae_tag) {
-		case ACL_USER:
-		case ACL_GROUP:
-			dest_entry->ae_id = le32_to_cpu(src_entry->e_id);
-			break;
-		case ACL_USER_OBJ:
-		case ACL_GROUP_OBJ:
-		case ACL_MASK:
-		case ACL_OTHER:
-			dest_entry->ae_id = ACL_UNDEFINED_ID;
-			break;
-		default:
-			return EINVAL;
-		}
-	}
-	if (xfs_acl_invalid(dest))
-		return EINVAL;
-
-	return 0;
-}
-
-/*
- * Comparison function called from xfs_sort().
- * Primary key is ae_tag, secondary key is ae_id.
- */
-STATIC int
-xfs_acl_entry_compare(
-	const void	*va,
-	const void	*vb)
-{
-	xfs_acl_entry_t	*a = (xfs_acl_entry_t *)va,
-			*b = (xfs_acl_entry_t *)vb;
-
-	if (a->ae_tag == b->ae_tag)
-		return (a->ae_id - b->ae_id);
-	return (a->ae_tag - b->ae_tag);
-}
-
-/*
- * Convert from in-memory XFS to extended attribute representation.
- */
-STATIC int
-posix_acl_xfs_to_xattr(
-	xfs_acl_t		*src,
-	posix_acl_xattr_header	*dest,
-	size_t			size)
-{
-	int			n;
-	size_t			new_size = posix_acl_xattr_size(src->acl_cnt);
-	posix_acl_xattr_entry	*dest_entry;
-	xfs_acl_entry_t		*src_entry;
-
-	if (size < new_size)
-		return -ERANGE;
-
-	/* Need to sort src XFS ACL by <ae_tag,ae_id> */
-	xfs_sort(src->acl_entry, src->acl_cnt, sizeof(src->acl_entry[0]),
-		 xfs_acl_entry_compare);
-
-	dest->a_version = cpu_to_le32(POSIX_ACL_XATTR_VERSION);
-	dest_entry = &dest->a_entries[0];
-	src_entry = &src->acl_entry[0];
-	for (n = 0; n < src->acl_cnt; n++, dest_entry++, src_entry++) {
-		dest_entry->e_perm = cpu_to_le16(src_entry->ae_perm);
-		if (_ACL_PERM_INVALID(src_entry->ae_perm))
-			return -EINVAL;
-		dest_entry->e_tag  = cpu_to_le16(src_entry->ae_tag);
-		switch (src_entry->ae_tag) {
-		case ACL_USER:
-		case ACL_GROUP:
-			dest_entry->e_id = cpu_to_le32(src_entry->ae_id);
-				break;
-		case ACL_USER_OBJ:
-		case ACL_GROUP_OBJ:
-		case ACL_MASK:
-		case ACL_OTHER:
-			dest_entry->e_id = cpu_to_le32(ACL_UNDEFINED_ID);
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
-	return new_size;
-}
-
-int
-xfs_acl_vget(
-	struct inode	*vp,
-	void		*acl,
-	size_t		size,
-	int		kind)
-{
-	int			error;
-	xfs_acl_t		*xfs_acl = NULL;
-	posix_acl_xattr_header	*ext_acl = acl;
-	int			flags = 0;
-
-	if(size) {
-		if (!(_ACL_ALLOC(xfs_acl))) {
-			error = ENOMEM;
-			goto out;
-		}
-		memset(xfs_acl, 0, sizeof(xfs_acl_t));
-	} else
-		flags = ATTR_KERNOVAL;
-
-	xfs_acl_get_attr(vp, xfs_acl, kind, flags, &error);
-	if (error)
-		goto out;
-
-	if (!size) {
-		error = -posix_acl_xattr_size(XFS_ACL_MAX_ENTRIES);
-	} else {
-		if (xfs_acl_invalid(xfs_acl)) {
-			error = EINVAL;
-			goto out;
-		}
-		if (kind == _ACL_TYPE_ACCESS)
-			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, xfs_acl);
-		error = -posix_acl_xfs_to_xattr(xfs_acl, ext_acl, size);
-	}
-out:
-	if(xfs_acl)
-		_ACL_FREE(xfs_acl);
-	return -error;
-}
-
-int
-xfs_acl_vremove(
-	struct inode	*vp,
-	int		kind)
-{
-	int		error;
-
-	error = xfs_acl_allow_set(vp, kind);
-	if (!error) {
-		error = xfs_attr_remove(XFS_I(vp),
-						kind == _ACL_TYPE_DEFAULT?
-						SGI_ACL_DEFAULT: SGI_ACL_FILE,
-						ATTR_ROOT);
-		if (error == ENOATTR)
-			error = 0;	/* 'scool */
-	}
-	return -error;
-}
-
-int
-xfs_acl_vset(
-	struct inode		*vp,
-	void			*acl,
-	size_t			size,
-	int			kind)
-{
-	posix_acl_xattr_header	*ext_acl = acl;
-	xfs_acl_t		*xfs_acl;
-	int			error;
-	int			basicperms = 0; /* more than std unix perms? */
-
-	if (!acl)
-		return -EINVAL;
-
-	if (!(_ACL_ALLOC(xfs_acl)))
-		return -ENOMEM;
-
-	error = posix_acl_xattr_to_xfs(ext_acl, size, xfs_acl);
-	if (error) {
-		_ACL_FREE(xfs_acl);
-		return -error;
-	}
-	if (!xfs_acl->acl_cnt) {
-		_ACL_FREE(xfs_acl);
-		return 0;
-	}
-
-	error = xfs_acl_allow_set(vp, kind);
-
-	/* Incoming ACL exists, set file mode based on its value */
-	if (!error && kind == _ACL_TYPE_ACCESS)
-		error = xfs_acl_setmode(vp, xfs_acl, &basicperms);
-
-	if (error)
-		goto out;
-
-	/*
-	 * If we have more than std unix permissions, set up the actual attr.
-	 * Otherwise, delete any existing attr.  This prevents us from
-	 * having actual attrs for permissions that can be stored in the
-	 * standard permission bits.
-	 */
-	if (!basicperms) {
-		xfs_acl_set_attr(vp, xfs_acl, kind, &error);
-	} else {
-		error = -xfs_acl_vremove(vp, _ACL_TYPE_ACCESS);
-	}
-
-out:
-	_ACL_FREE(xfs_acl);
-	return -error;
-}
-
-int
-xfs_acl_iaccess(
-	xfs_inode_t	*ip,
-	mode_t		mode,
-	cred_t		*cr)
-{
-	xfs_acl_t	*acl;
-	int		rval;
-	struct xfs_name	acl_name = {SGI_ACL_FILE, SGI_ACL_FILE_SIZE};
-
-	if (!(_ACL_ALLOC(acl)))
-		return -1;
-
-	/* If the file has no ACL return -1. */
-	rval = sizeof(xfs_acl_t);
-	if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, ATTR_ROOT)) {
-		_ACL_FREE(acl);
-		return -1;
-	}
-	xfs_acl_get_endian(acl);
-
-	/* If the file has an empty ACL return -1. */
-	if (acl->acl_cnt == XFS_ACL_NOT_PRESENT) {
-		_ACL_FREE(acl);
-		return -1;
-	}
-
-	/* Synchronize ACL with mode bits */
-	xfs_acl_sync_mode(ip->i_d.di_mode, acl);
-
-	rval = xfs_acl_access(ip->i_d.di_uid, ip->i_d.di_gid, acl, mode, cr);
-	_ACL_FREE(acl);
-	return rval;
-}
-
-STATIC int
-xfs_acl_allow_set(
-	struct inode	*vp,
-	int		kind)
-{
-	if (vp->i_flags & (S_IMMUTABLE|S_APPEND))
-		return EPERM;
-	if (kind == _ACL_TYPE_DEFAULT && !S_ISDIR(vp->i_mode))
-		return ENOTDIR;
-	if (vp->i_sb->s_flags & MS_RDONLY)
-		return EROFS;
-	if (XFS_I(vp)->i_d.di_uid != current_fsuid() && !capable(CAP_FOWNER))
-		return EPERM;
-	return 0;
-}
-
-/*
- * Note: cr is only used here for the capability check if the ACL test fails.
- *       It is not used to find out the credentials uid or groups etc, as was
- *       done in IRIX. It is assumed that the uid and groups for the current
- *       thread are taken from "current" instead of the cr parameter.
- */
-STATIC int
-xfs_acl_access(
-	uid_t		fuid,
-	gid_t		fgid,
-	xfs_acl_t	*fap,
-	mode_t		md,
-	cred_t		*cr)
-{
-	xfs_acl_entry_t	matched;
-	int		i, allows;
-	int		maskallows = -1;	/* true, but not 1, either */
-	int		seen_userobj = 0;
-
-	matched.ae_tag = 0;	/* Invalid type */
-	matched.ae_perm = 0;
-
-	for (i = 0; i < fap->acl_cnt; i++) {
-		/*
-		 * Break out if we've got a user_obj entry or
-		 * a user entry and the mask (and have processed USER_OBJ)
-		 */
-		if (matched.ae_tag == ACL_USER_OBJ)
-			break;
-		if (matched.ae_tag == ACL_USER) {
-			if (maskallows != -1 && seen_userobj)
-				break;
-			if (fap->acl_entry[i].ae_tag != ACL_MASK &&
-			    fap->acl_entry[i].ae_tag != ACL_USER_OBJ)
-				continue;
-		}
-		/* True if this entry allows the requested access */
-		allows = ((fap->acl_entry[i].ae_perm & md) == md);
-
-		switch (fap->acl_entry[i].ae_tag) {
-		case ACL_USER_OBJ:
-			seen_userobj = 1;
-			if (fuid != current_fsuid())
-				continue;
-			matched.ae_tag = ACL_USER_OBJ;
-			matched.ae_perm = allows;
-			break;
-		case ACL_USER:
-			if (fap->acl_entry[i].ae_id != current_fsuid())
-				continue;
-			matched.ae_tag = ACL_USER;
-			matched.ae_perm = allows;
-			break;
-		case ACL_GROUP_OBJ:
-			if ((matched.ae_tag == ACL_GROUP_OBJ ||
-			    matched.ae_tag == ACL_GROUP) && !allows)
-				continue;
-			if (!in_group_p(fgid))
-				continue;
-			matched.ae_tag = ACL_GROUP_OBJ;
-			matched.ae_perm = allows;
-			break;
-		case ACL_GROUP:
-			if ((matched.ae_tag == ACL_GROUP_OBJ ||
-			    matched.ae_tag == ACL_GROUP) && !allows)
-				continue;
-			if (!in_group_p(fap->acl_entry[i].ae_id))
-				continue;
-			matched.ae_tag = ACL_GROUP;
-			matched.ae_perm = allows;
-			break;
-		case ACL_MASK:
-			maskallows = allows;
-			break;
-		case ACL_OTHER:
-			if (matched.ae_tag != 0)
-				continue;
-			matched.ae_tag = ACL_OTHER;
-			matched.ae_perm = allows;
-			break;
-		}
-	}
-	/*
-	 * First possibility is that no matched entry allows access.
-	 * The capability to override DAC may exist, so check for it.
-	 */
-	switch (matched.ae_tag) {
-	case ACL_OTHER:
-	case ACL_USER_OBJ:
-		if (matched.ae_perm)
-			return 0;
-		break;
-	case ACL_USER:
-	case ACL_GROUP_OBJ:
-	case ACL_GROUP:
-		if (maskallows && matched.ae_perm)
-			return 0;
-		break;
-	case 0:
-		break;
-	}
-
-	/* EACCES tells generic_permission to check for capability overrides */
-	return EACCES;
-}
-
-/*
- * ACL validity checker.
- *   This acl validation routine checks each ACL entry read in makes sense.
- */
-STATIC int
-xfs_acl_invalid(
-	xfs_acl_t	*aclp)
-{
-	xfs_acl_entry_t	*entry, *e;
-	int		user = 0, group = 0, other = 0, mask = 0;
-	int		mask_required = 0;
-	int		i, j;
-
-	if (!aclp)
-		goto acl_invalid;
-
-	if (aclp->acl_cnt > XFS_ACL_MAX_ENTRIES)
-		goto acl_invalid;
-
-	for (i = 0; i < aclp->acl_cnt; i++) {
-		entry = &aclp->acl_entry[i];
-		switch (entry->ae_tag) {
-		case ACL_USER_OBJ:
-			if (user++)
-				goto acl_invalid;
-			break;
-		case ACL_GROUP_OBJ:
-			if (group++)
-				goto acl_invalid;
-			break;
-		case ACL_OTHER:
-			if (other++)
-				goto acl_invalid;
-			break;
-		case ACL_USER:
-		case ACL_GROUP:
-			for (j = i + 1; j < aclp->acl_cnt; j++) {
-				e = &aclp->acl_entry[j];
-				if (e->ae_id == entry->ae_id &&
-				    e->ae_tag == entry->ae_tag)
-					goto acl_invalid;
-			}
-			mask_required++;
-			break;
-		case ACL_MASK:
-			if (mask++)
-				goto acl_invalid;
-			break;
-		default:
-			goto acl_invalid;
-		}
-	}
-	if (!user || !group || !other || (mask_required && !mask))
-		goto acl_invalid;
-	else
-		return 0;
-acl_invalid:
-	return EINVAL;
-}
-
-/*
- * Do ACL endian conversion.
- */
-STATIC void
-xfs_acl_get_endian(
-	xfs_acl_t	*aclp)
-{
-	xfs_acl_entry_t	*ace, *end;
-
-	INT_SET(aclp->acl_cnt, ARCH_CONVERT, aclp->acl_cnt);
-	end = &aclp->acl_entry[0]+aclp->acl_cnt;
-	for (ace = &aclp->acl_entry[0]; ace < end; ace++) {
-		INT_SET(ace->ae_tag, ARCH_CONVERT, ace->ae_tag);
-		INT_SET(ace->ae_id, ARCH_CONVERT, ace->ae_id);
-		INT_SET(ace->ae_perm, ARCH_CONVERT, ace->ae_perm);
-	}
-}
-
-/*
- * Get the ACL from the EA and do endian conversion.
- */
-STATIC void
-xfs_acl_get_attr(
-	struct inode	*vp,
-	xfs_acl_t	*aclp,
-	int		kind,
-	int		flags,
-	int		*error)
-{
-	int		len = sizeof(xfs_acl_t);
-
-	ASSERT((flags & ATTR_KERNOVAL) ? (aclp == NULL) : 1);
-	flags |= ATTR_ROOT;
-	*error = xfs_attr_get(XFS_I(vp),
-					kind == _ACL_TYPE_ACCESS ?
-					SGI_ACL_FILE : SGI_ACL_DEFAULT,
-					(char *)aclp, &len, flags);
-	if (*error || (flags & ATTR_KERNOVAL))
-		return;
-	xfs_acl_get_endian(aclp);
-}
-
-/*
- * Set the EA with the ACL and do endian conversion.
- */
-STATIC void
-xfs_acl_set_attr(
-	struct inode	*vp,
-	xfs_acl_t	*aclp,
-	int		kind,
-	int		*error)
-{
-	xfs_acl_entry_t	*ace, *newace, *end;
-	xfs_acl_t	*newacl;
-	int		len;
-
-	if (!(_ACL_ALLOC(newacl))) {
-		*error = ENOMEM;
-		return;
-	}
-
-	len = sizeof(xfs_acl_t) -
-	      (sizeof(xfs_acl_entry_t) * (XFS_ACL_MAX_ENTRIES - aclp->acl_cnt));
-	end = &aclp->acl_entry[0]+aclp->acl_cnt;
-	for (ace = &aclp->acl_entry[0], newace = &newacl->acl_entry[0];
-	     ace < end;
-	     ace++, newace++) {
-		INT_SET(newace->ae_tag, ARCH_CONVERT, ace->ae_tag);
-		INT_SET(newace->ae_id, ARCH_CONVERT, ace->ae_id);
-		INT_SET(newace->ae_perm, ARCH_CONVERT, ace->ae_perm);
-	}
-	INT_SET(newacl->acl_cnt, ARCH_CONVERT, aclp->acl_cnt);
-	*error = xfs_attr_set(XFS_I(vp),
-				kind == _ACL_TYPE_ACCESS ?
-				SGI_ACL_FILE: SGI_ACL_DEFAULT,
-				(char *)newacl, len, ATTR_ROOT);
-	_ACL_FREE(newacl);
-}
-
-int
-xfs_acl_vtoacl(
-	struct inode	*vp,
-	xfs_acl_t	*access_acl,
-	xfs_acl_t	*default_acl)
-{
-	int		error = 0;
-
-	if (access_acl) {
-		/*
-		 * Get the Access ACL and the mode.  If either cannot
-		 * be obtained for some reason, invalidate the access ACL.
-		 */
-		xfs_acl_get_attr(vp, access_acl, _ACL_TYPE_ACCESS, 0, &error);
-		if (error)
-			access_acl->acl_cnt = XFS_ACL_NOT_PRESENT;
-		else /* We have a good ACL and the file mode, synchronize. */
-			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, access_acl);
-	}
-
-	if (default_acl) {
-		xfs_acl_get_attr(vp, default_acl, _ACL_TYPE_DEFAULT, 0, &error);
-		if (error)
-			default_acl->acl_cnt = XFS_ACL_NOT_PRESENT;
-	}
-	return error;
-}
-
-/*
- * This function retrieves the parent directory's acl, processes it
- * and lets the child inherit the acl(s) that it should.
- */
-int
-xfs_acl_inherit(
-	struct inode	*vp,
-	mode_t		mode,
-	xfs_acl_t	*pdaclp)
-{
-	xfs_acl_t	*cacl;
-	int		error = 0;
-	int		basicperms = 0;
-
-	/*
-	 * If the parent does not have a default ACL, or it's an
-	 * invalid ACL, we're done.
-	 */
-	if (!vp)
-		return 0;
-	if (!pdaclp || xfs_acl_invalid(pdaclp))
-		return 0;
-
-	/*
-	 * Copy the default ACL of the containing directory to
-	 * the access ACL of the new file and use the mode that
-	 * was passed in to set up the correct initial values for
-	 * the u::,g::[m::], and o:: entries.  This is what makes
-	 * umask() "work" with ACL's.
-	 */
-
-	if (!(_ACL_ALLOC(cacl)))
-		return ENOMEM;
-
-	memcpy(cacl, pdaclp, sizeof(xfs_acl_t));
-	xfs_acl_filter_mode(mode, cacl);
-	error = xfs_acl_setmode(vp, cacl, &basicperms);
-	if (error)
-		goto out_error;
-
-	/*
-	 * Set the Default and Access ACL on the file.  The mode is already
-	 * set on the file, so we don't need to worry about that.
-	 *
-	 * If the new file is a directory, its default ACL is a copy of
-	 * the containing directory's default ACL.
-	 */
-	if (S_ISDIR(vp->i_mode))
-		xfs_acl_set_attr(vp, pdaclp, _ACL_TYPE_DEFAULT, &error);
-	if (!error && !basicperms)
-		xfs_acl_set_attr(vp, cacl, _ACL_TYPE_ACCESS, &error);
-out_error:
-	_ACL_FREE(cacl);
-	return error;
-}
-
-/*
- * Set up the correct mode on the file based on the supplied ACL.  This
- * makes sure that the mode on the file reflects the state of the
- * u::,g::[m::], and o:: entries in the ACL.  Since the mode is where
- * the ACL is going to get the permissions for these entries, we must
- * synchronize the mode whenever we set the ACL on a file.
- */
-STATIC int
-xfs_acl_setmode(
-	struct inode	*vp,
-	xfs_acl_t	*acl,
-	int		*basicperms)
-{
-	struct iattr	iattr;
-	xfs_acl_entry_t	*ap;
-	xfs_acl_entry_t	*gap = NULL;
-	int		i, nomask = 1;
-
-	*basicperms = 1;
-
-	if (acl->acl_cnt == XFS_ACL_NOT_PRESENT)
-		return 0;
-
-	/*
-	 * Copy the u::, g::, o::, and m:: bits from the ACL into the
-	 * mode.  The m:: bits take precedence over the g:: bits.
-	 */
-	iattr.ia_valid = ATTR_MODE;
-	iattr.ia_mode = XFS_I(vp)->i_d.di_mode;
-	iattr.ia_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO);
-	ap = acl->acl_entry;
-	for (i = 0; i < acl->acl_cnt; ++i) {
-		switch (ap->ae_tag) {
-		case ACL_USER_OBJ:
-			iattr.ia_mode |= ap->ae_perm << 6;
-			break;
-		case ACL_GROUP_OBJ:
-			gap = ap;
-			break;
-		case ACL_MASK:	/* more than just standard modes */
-			nomask = 0;
-			iattr.ia_mode |= ap->ae_perm << 3;
-			*basicperms = 0;
-			break;
-		case ACL_OTHER:
-			iattr.ia_mode |= ap->ae_perm;
-			break;
-		default:	/* more than just standard modes */
-			*basicperms = 0;
-			break;
-		}
-		ap++;
-	}
-
-	/* Set the group bits from ACL_GROUP_OBJ if there's no ACL_MASK */
-	if (gap && nomask)
-		iattr.ia_mode |= gap->ae_perm << 3;
-
-	return xfs_setattr(XFS_I(vp), &iattr, 0);
-}
-
-/*
- * The permissions for the special ACL entries (u::, g::[m::], o::) are
- * actually stored in the file mode (if there is both a group and a mask,
- * the group is stored in the ACL entry and the mask is stored on the file).
- * This allows the mode to remain automatically in sync with the ACL without
- * the need for a call-back to the ACL system at every point where the mode
- * could change.  This function takes the permissions from the specified mode
- * and places it in the supplied ACL.
- *
- * This implementation draws its validity from the fact that, when the ACL
- * was assigned, the mode was copied from the ACL.
- * If the mode did not change, therefore, the mode remains exactly what was
- * taken from the special ACL entries at assignment.
- * If a subsequent chmod() was done, the POSIX spec says that the change in
- * mode must cause an update to the ACL seen at user level and used for
- * access checks.  Before and after a mode change, therefore, the file mode
- * most accurately reflects what the special ACL entries should permit/deny.
- *
- * CAVEAT: If someone sets the SGI_ACL_FILE attribute directly,
- *         the existing mode bits will override whatever is in the
- *         ACL. Similarly, if there is a pre-existing ACL that was
- *         never in sync with its mode (owing to a bug in 6.5 and
- *         before), it will now magically (or mystically) be
- *         synchronized.  This could cause slight astonishment, but
- *         it is better than inconsistent permissions.
- *
- * The supplied ACL is a template that may contain any combination
- * of special entries.  These are treated as place holders when we fill
- * out the ACL.  This routine does not add or remove special entries, it
- * simply unites each special entry with its associated set of permissions.
- */
-STATIC void
-xfs_acl_sync_mode(
-	mode_t		mode,
-	xfs_acl_t	*acl)
-{
-	int		i, nomask = 1;
-	xfs_acl_entry_t	*ap;
-	xfs_acl_entry_t	*gap = NULL;
-
-	/*
-	 * Set ACL entries. POSIX1003.1eD16 requires that the MASK
-	 * be set instead of the GROUP entry, if there is a MASK.
-	 */
-	for (ap = acl->acl_entry, i = 0; i < acl->acl_cnt; ap++, i++) {
-		switch (ap->ae_tag) {
-		case ACL_USER_OBJ:
-			ap->ae_perm = (mode >> 6) & 0x7;
-			break;
-		case ACL_GROUP_OBJ:
-			gap = ap;
-			break;
-		case ACL_MASK:
-			nomask = 0;
-			ap->ae_perm = (mode >> 3) & 0x7;
-			break;
-		case ACL_OTHER:
-			ap->ae_perm = mode & 0x7;
-			break;
-		default:
-			break;
-		}
-	}
-	/* Set the ACL_GROUP_OBJ if there's no ACL_MASK */
-	if (gap && nomask)
-		gap->ae_perm = (mode >> 3) & 0x7;
-}
-
-/*
- * When inheriting an Access ACL from a directory Default ACL,
- * the ACL bits are set to the intersection of the ACL default
- * permission bits and the file permission bits in mode. If there
- * are no permission bits on the file then we must not give them
- * the ACL. This is what what makes umask() work with ACLs.
- */
-STATIC void
-xfs_acl_filter_mode(
-	mode_t		mode,
-	xfs_acl_t	*acl)
-{
-	int		i, nomask = 1;
-	xfs_acl_entry_t	*ap;
-	xfs_acl_entry_t	*gap = NULL;
-
-	/*
-	 * Set ACL entries. POSIX1003.1eD16 requires that the MASK
-	 * be merged with GROUP entry, if there is a MASK.
-	 */
-	for (ap = acl->acl_entry, i = 0; i < acl->acl_cnt; ap++, i++) {
-		switch (ap->ae_tag) {
-		case ACL_USER_OBJ:
-			ap->ae_perm &= (mode >> 6) & 0x7;
-			break;
-		case ACL_GROUP_OBJ:
-			gap = ap;
-			break;
-		case ACL_MASK:
-			nomask = 0;
-			ap->ae_perm &= (mode >> 3) & 0x7;
-			break;
-		case ACL_OTHER:
-			ap->ae_perm &= mode & 0x7;
-			break;
-		default:
-			break;
-		}
-	}
-	/* Set the ACL_GROUP_OBJ if there's no ACL_MASK */
-	if (gap && nomask)
-		gap->ae_perm &= (mode >> 3) & 0x7;
-}
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index 642f1db4def..63dc1f2efad 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -18,81 +18,48 @@
 #ifndef __XFS_ACL_H__
 #define __XFS_ACL_H__
 
-/*
- * Access Control Lists
- */
-typedef __uint16_t	xfs_acl_perm_t;
-typedef __int32_t	xfs_acl_tag_t;
-typedef __int32_t	xfs_acl_id_t;
+struct inode;
+struct posix_acl;
+struct xfs_inode;
 
 #define XFS_ACL_MAX_ENTRIES 25
 #define XFS_ACL_NOT_PRESENT (-1)
 
-typedef struct xfs_acl_entry {
-	xfs_acl_tag_t	ae_tag;
-	xfs_acl_id_t	ae_id;
-	xfs_acl_perm_t	ae_perm;
-} xfs_acl_entry_t;
-
-typedef struct xfs_acl {
-	__int32_t	acl_cnt;
-	xfs_acl_entry_t	acl_entry[XFS_ACL_MAX_ENTRIES];
-} xfs_acl_t;
+/* On-disk XFS access control list structure */
+struct xfs_acl {
+	__be32		acl_cnt;
+	struct xfs_acl_entry {
+		__be32	ae_tag;
+		__be32	ae_id;
+		__be16	ae_perm;
+	} acl_entry[XFS_ACL_MAX_ENTRIES];
+};
 
 /* On-disk XFS extended attribute names */
-#define SGI_ACL_FILE	"SGI_ACL_FILE"
-#define SGI_ACL_DEFAULT	"SGI_ACL_DEFAULT"
+#define SGI_ACL_FILE		"SGI_ACL_FILE"
+#define SGI_ACL_DEFAULT		"SGI_ACL_DEFAULT"
 #define SGI_ACL_FILE_SIZE	(sizeof(SGI_ACL_FILE)-1)
 #define SGI_ACL_DEFAULT_SIZE	(sizeof(SGI_ACL_DEFAULT)-1)
 
-#define _ACL_TYPE_ACCESS	1
-#define _ACL_TYPE_DEFAULT	2
-
 #ifdef CONFIG_XFS_POSIX_ACL
+extern int xfs_check_acl(struct inode *inode, int mask);
+extern struct posix_acl *xfs_get_acl(struct inode *inode, int type);
+extern int xfs_inherit_acl(struct inode *inode, struct posix_acl *default_acl);
+extern int xfs_acl_chmod(struct inode *inode);
+extern void xfs_inode_init_acls(struct xfs_inode *ip);
+extern void xfs_inode_clear_acls(struct xfs_inode *ip);
+extern int posix_acl_access_exists(struct inode *inode);
+extern int posix_acl_default_exists(struct inode *inode);
 
-struct vattr;
-struct xfs_inode;
-
-extern struct kmem_zone *xfs_acl_zone;
-#define xfs_acl_zone_init(zone, name)	\
-		(zone) = kmem_zone_init(sizeof(xfs_acl_t), (name))
-#define xfs_acl_zone_destroy(zone)	kmem_zone_destroy(zone)
-
-extern int xfs_acl_inherit(struct inode *, mode_t mode, xfs_acl_t *);
-extern int xfs_acl_iaccess(struct xfs_inode *, mode_t, cred_t *);
-extern int xfs_acl_vtoacl(struct inode *, xfs_acl_t *, xfs_acl_t *);
-extern int xfs_acl_vhasacl_access(struct inode *);
-extern int xfs_acl_vhasacl_default(struct inode *);
-extern int xfs_acl_vset(struct inode *, void *, size_t, int);
-extern int xfs_acl_vget(struct inode *, void *, size_t, int);
-extern int xfs_acl_vremove(struct inode *, int);
-
-#define _ACL_PERM_INVALID(perm)	((perm) & ~(ACL_READ|ACL_WRITE|ACL_EXECUTE))
-
-#define _ACL_INHERIT(c,m,d)	(xfs_acl_inherit(c,m,d))
-#define _ACL_GET_ACCESS(pv,pa)	(xfs_acl_vtoacl(pv,pa,NULL) == 0)
-#define _ACL_GET_DEFAULT(pv,pd)	(xfs_acl_vtoacl(pv,NULL,pd) == 0)
-#define _ACL_ACCESS_EXISTS	xfs_acl_vhasacl_access
-#define _ACL_DEFAULT_EXISTS	xfs_acl_vhasacl_default
-
-#define _ACL_ALLOC(a)		((a) = kmem_zone_alloc(xfs_acl_zone, KM_SLEEP))
-#define _ACL_FREE(a)		((a)? kmem_zone_free(xfs_acl_zone, (a)):(void)0)
-
+extern struct xattr_handler xfs_xattr_system_handler;
 #else
-#define xfs_acl_zone_init(zone,name)
-#define xfs_acl_zone_destroy(zone)
-#define xfs_acl_vset(v,p,sz,t)	(-EOPNOTSUPP)
-#define xfs_acl_vget(v,p,sz,t)	(-EOPNOTSUPP)
-#define xfs_acl_vremove(v,t)	(-EOPNOTSUPP)
-#define xfs_acl_vhasacl_access(v)	(0)
-#define xfs_acl_vhasacl_default(v)	(0)
-#define _ACL_ALLOC(a)		(1)	/* successfully allocate nothing */
-#define _ACL_FREE(a)		((void)0)
-#define _ACL_INHERIT(c,m,d)	(0)
-#define _ACL_GET_ACCESS(pv,pa)	(0)
-#define _ACL_GET_DEFAULT(pv,pd)	(0)
-#define _ACL_ACCESS_EXISTS	(NULL)
-#define _ACL_DEFAULT_EXISTS	(NULL)
-#endif
-
+# define xfs_check_acl					NULL
+# define xfs_get_acl(inode, type)			NULL
+# define xfs_inherit_acl(inode, default_acl)		0
+# define xfs_acl_chmod(inode)				0
+# define xfs_inode_init_acls(ip)
+# define xfs_inode_clear_acls(ip)
+# define posix_acl_access_exists(inode)			0
+# define posix_acl_default_exists(inode)		0
+#endif /* CONFIG_XFS_POSIX_ACL */
 #endif	/* __XFS_ACL_H__ */
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index c8641f713ca..f24b50b68d0 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -212,6 +212,8 @@ typedef struct xfs_perag
 /*
  * tags for inode radix tree
  */
+#define XFS_ICI_NO_TAG		(-1)	/* special flag for an untagged lookup
+					   in xfs_inode_ag_iterator */
 #define XFS_ICI_RECLAIM_TAG	0	/* inode is to be reclaimed */
 
 #define	XFS_AG_MAXLEVELS(mp)		((mp)->m_ag_maxlevels)
diff --git a/fs/xfs/xfs_arch.h b/fs/xfs/xfs_arch.h
index 53d5e70d136..0902249354a 100644
--- a/fs/xfs/xfs_arch.h
+++ b/fs/xfs/xfs_arch.h
@@ -73,28 +73,6 @@ static inline void be64_add_cpu(__be64 *a, __s64 b)
 
 #endif	/* __KERNEL__ */
 
-/* do we need conversion? */
-#define ARCH_NOCONVERT 1
-#ifdef XFS_NATIVE_HOST
-# define ARCH_CONVERT	ARCH_NOCONVERT
-#else
-# define ARCH_CONVERT	0
-#endif
-
-/* generic swapping macros */
-
-#ifndef HAVE_SWABMACROS
-#define INT_SWAP16(type,var) ((typeof(type))(__swab16((__u16)(var))))
-#define INT_SWAP32(type,var) ((typeof(type))(__swab32((__u32)(var))))
-#define INT_SWAP64(type,var) ((typeof(type))(__swab64((__u64)(var))))
-#endif
-
-#define INT_SWAP(type, var) \
-    ((sizeof(type) == 8) ? INT_SWAP64(type,var) : \
-    ((sizeof(type) == 4) ? INT_SWAP32(type,var) : \
-    ((sizeof(type) == 2) ? INT_SWAP16(type,var) : \
-    (var))))
-
 /*
  * get and set integers from potentially unaligned locations
  */
@@ -107,16 +85,6 @@ static inline void be64_add_cpu(__be64 *a, __s64 b)
 	((__u8*)(pointer))[1] = (((value)     ) & 0xff); \
     }
 
-/* does not return a value */
-#define INT_SET(reference,arch,valueref) \
-    (__builtin_constant_p(valueref) ? \
-	(void)( (reference) = ( ((arch) != ARCH_NOCONVERT) ? (INT_SWAP((reference),(valueref))) : (valueref)) ) : \
-	(void)( \
-	    ((reference) = (valueref)), \
-	    ( ((arch) != ARCH_NOCONVERT) ? (reference) = INT_SWAP((reference),(reference)) : 0 ) \
-	) \
-    )
-
 /*
  * In directories inode numbers are stored as unaligned arrays of unsigned
  * 8bit integers on disk.
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index 5fde1654b43..db15feb906f 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -45,7 +45,6 @@
 #include "xfs_error.h"
 #include "xfs_quota.h"
 #include "xfs_trans_space.h"
-#include "xfs_acl.h"
 #include "xfs_rw.h"
 #include "xfs_vnodeops.h"
 
@@ -249,8 +248,9 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	/*
 	 * Attach the dquots to the inode.
 	 */
-	if ((error = XFS_QM_DQATTACH(mp, dp, 0)))
-		return (error);
+	error = xfs_qm_dqattach(dp, 0);
+	if (error)
+		return error;
 
 	/*
 	 * If the inode doesn't have an attribute fork, add one.
@@ -311,7 +311,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	}
 	xfs_ilock(dp, XFS_ILOCK_EXCL);
 
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, args.trans, dp, args.total, 0,
+	error = xfs_trans_reserve_quota_nblks(args.trans, dp, args.total, 0,
 				rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
 				       XFS_QMOPT_RES_REGBLKS);
 	if (error) {
@@ -501,8 +501,9 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags)
 	/*
 	 * Attach the dquots to the inode.
 	 */
-	if ((error = XFS_QM_DQATTACH(mp, dp, 0)))
-		return (error);
+	error = xfs_qm_dqattach(dp, 0);
+	if (error)
+		return error;
 
 	/*
 	 * Start our first transaction of the day.
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index ca7c6005a48..7928b9983c1 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -2691,7 +2691,7 @@ xfs_bmap_rtalloc(
 		 * Adjust the disk quota also. This was reserved
 		 * earlier.
 		 */
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, ap->tp, ap->ip,
+		xfs_trans_mod_dquot_byino(ap->tp, ap->ip,
 			ap->wasdel ? XFS_TRANS_DQ_DELRTBCOUNT :
 					XFS_TRANS_DQ_RTBCOUNT, (long) ralen);
 	} else {
@@ -2995,7 +2995,7 @@ xfs_bmap_btalloc(
 		 * Adjust the disk quota also. This was reserved
 		 * earlier.
 		 */
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, ap->tp, ap->ip,
+		xfs_trans_mod_dquot_byino(ap->tp, ap->ip,
 			ap->wasdel ? XFS_TRANS_DQ_DELBCOUNT :
 					XFS_TRANS_DQ_BCOUNT,
 			(long) args.len);
@@ -3066,7 +3066,7 @@ xfs_bmap_btree_to_extents(
 		return error;
 	xfs_bmap_add_free(cbno, 1, cur->bc_private.b.flist, mp);
 	ip->i_d.di_nblocks--;
-	XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
+	xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
 	xfs_trans_binval(tp, cbp);
 	if (cur->bc_bufs[0] == cbp)
 		cur->bc_bufs[0] = NULL;
@@ -3386,7 +3386,7 @@ xfs_bmap_del_extent(
 	 * Adjust quota data.
 	 */
 	if (qfield)
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, qfield, (long)-nblks);
+		xfs_trans_mod_dquot_byino(tp, ip, qfield, (long)-nblks);
 
 	/*
 	 * Account for change in delayed indirect blocks.
@@ -3523,7 +3523,7 @@ xfs_bmap_extents_to_btree(
 	*firstblock = cur->bc_private.b.firstblock = args.fsbno;
 	cur->bc_private.b.allocated++;
 	ip->i_d.di_nblocks++;
-	XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_BCOUNT, 1L);
+	xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, 1L);
 	abp = xfs_btree_get_bufl(mp, tp, args.fsbno, 0);
 	/*
 	 * Fill in the child block.
@@ -3690,7 +3690,7 @@ xfs_bmap_local_to_extents(
 		XFS_BMAP_TRACE_POST_UPDATE("new", ip, 0, whichfork);
 		XFS_IFORK_NEXT_SET(ip, whichfork, 1);
 		ip->i_d.di_nblocks = 1;
-		XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip,
+		xfs_trans_mod_dquot_byino(tp, ip,
 			XFS_TRANS_DQ_BCOUNT, 1L);
 		flags |= xfs_ilog_fext(whichfork);
 	} else {
@@ -4048,7 +4048,7 @@ xfs_bmap_add_attrfork(
 			XFS_TRANS_PERM_LOG_RES, XFS_ADDAFORK_LOG_COUNT)))
 		goto error0;
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip, blks, 0, rsvd ?
+	error = xfs_trans_reserve_quota_nblks(tp, ip, blks, 0, rsvd ?
 			XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
 			XFS_QMOPT_RES_REGBLKS);
 	if (error) {
@@ -4983,10 +4983,11 @@ xfs_bmapi(
 				 * adjusted later.  We return if we haven't
 				 * allocated blocks already inside this loop.
 				 */
-				if ((error = XFS_TRANS_RESERVE_QUOTA_NBLKS(
-						mp, NULL, ip, (long)alen, 0,
+				error = xfs_trans_reserve_quota_nblks(
+						NULL, ip, (long)alen, 0,
 						rt ? XFS_QMOPT_RES_RTBLKS :
-						     XFS_QMOPT_RES_REGBLKS))) {
+						     XFS_QMOPT_RES_REGBLKS);
+				if (error) {
 					if (n == 0) {
 						*nmap = 0;
 						ASSERT(cur == NULL);
@@ -5035,8 +5036,8 @@ xfs_bmapi(
 					if (XFS_IS_QUOTA_ON(mp))
 						/* unreserve the blocks now */
 						(void)
-						XFS_TRANS_UNRESERVE_QUOTA_NBLKS(
-							mp, NULL, ip,
+						xfs_trans_unreserve_quota_nblks(
+							NULL, ip,
 							(long)alen, 0, rt ?
 							XFS_QMOPT_RES_RTBLKS :
 							XFS_QMOPT_RES_REGBLKS);
@@ -5691,14 +5692,14 @@ xfs_bunmapi(
 				do_div(rtexts, mp->m_sb.sb_rextsize);
 				xfs_mod_incore_sb(mp, XFS_SBS_FREXTENTS,
 						(int64_t)rtexts, rsvd);
-				(void)XFS_TRANS_RESERVE_QUOTA_NBLKS(mp,
-					NULL, ip, -((long)del.br_blockcount), 0,
+				(void)xfs_trans_reserve_quota_nblks(NULL,
+					ip, -((long)del.br_blockcount), 0,
 					XFS_QMOPT_RES_RTBLKS);
 			} else {
 				xfs_mod_incore_sb(mp, XFS_SBS_FDBLOCKS,
 						(int64_t)del.br_blockcount, rsvd);
-				(void)XFS_TRANS_RESERVE_QUOTA_NBLKS(mp,
-					NULL, ip, -((long)del.br_blockcount), 0,
+				(void)xfs_trans_reserve_quota_nblks(NULL,
+					ip, -((long)del.br_blockcount), 0,
 					XFS_QMOPT_RES_REGBLKS);
 			}
 			ip->i_delayed_blks -= del.br_blockcount;
@@ -6085,6 +6086,7 @@ xfs_getbmap(
 			break;
 	}
 
+	kmem_free(out);
 	return error;
 }
 
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 0760d352586..5c1ade06578 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -590,7 +590,7 @@ xfs_bmbt_alloc_block(
 	cur->bc_private.b.allocated++;
 	cur->bc_private.b.ip->i_d.di_nblocks++;
 	xfs_trans_log_inode(args.tp, cur->bc_private.b.ip, XFS_ILOG_CORE);
-	XFS_TRANS_MOD_DQUOT_BYINO(args.mp, args.tp, cur->bc_private.b.ip,
+	xfs_trans_mod_dquot_byino(args.tp, cur->bc_private.b.ip,
 			XFS_TRANS_DQ_BCOUNT, 1L);
 
 	new->l = cpu_to_be64(args.fsbno);
@@ -618,7 +618,7 @@ xfs_bmbt_free_block(
 	ip->i_d.di_nblocks--;
 
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
+	xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
 	xfs_trans_binval(tp, bp);
 	return 0;
 }
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 6c87c8f304e..edf8bdf4141 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -542,10 +542,8 @@ xfs_filestream_associate(
 	 * waiting for the lock because someone else is waiting on the lock we
 	 * hold and we cannot drop that as we are in a transaction here.
 	 *
-	 * Lucky for us, this inversion is rarely a problem because it's a
-	 * directory inode that we are trying to lock here and that means the
-	 * only place that matters is xfs_sync_inodes() and SYNC_DELWRI is
-	 * used. i.e. freeze, remount-ro, quotasync or unmount.
+	 * Lucky for us, this inversion is not a problem because it's a
+	 * directory inode that we are trying to lock here.
 	 *
 	 * So, if we can't get the iolock without sleeping then just give up
 	 */
diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h
index f7c06fac822..c4ea51b55dc 100644
--- a/fs/xfs/xfs_fs.h
+++ b/fs/xfs/xfs_fs.h
@@ -239,10 +239,13 @@ typedef struct xfs_fsop_resblks {
  * Minimum and maximum sizes need for growth checks
  */
 #define XFS_MIN_AG_BLOCKS	64
-#define XFS_MIN_LOG_BLOCKS	512
-#define XFS_MAX_LOG_BLOCKS	(64 * 1024)
-#define XFS_MIN_LOG_BYTES	(256 * 1024)
-#define XFS_MAX_LOG_BYTES	(128 * 1024 * 1024)
+#define XFS_MIN_LOG_BLOCKS	512ULL
+#define XFS_MAX_LOG_BLOCKS	(1024 * 1024ULL)
+#define XFS_MIN_LOG_BYTES	(10 * 1024 * 1024ULL)
+
+/* keep the maximum size under 2^31 by a small amount */
+#define XFS_MAX_LOG_BYTES \
+	((2 * 1024 * 1024 * 1024ULL) - XFS_MIN_LOG_BYTES)
 
 /*
  * Structures for XFS_IOC_FSGROWFSDATA, XFS_IOC_FSGROWFSLOG & XFS_IOC_FSGROWFSRT
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 89b81eedce6..76c540f719e 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -18,6 +18,7 @@
 #include "xfs.h"
 #include "xfs_fs.h"
 #include "xfs_types.h"
+#include "xfs_acl.h"
 #include "xfs_bit.h"
 #include "xfs_log.h"
 #include "xfs_inum.h"
@@ -82,6 +83,7 @@ xfs_inode_alloc(
 	memset(&ip->i_d, 0, sizeof(xfs_icdinode_t));
 	ip->i_size = 0;
 	ip->i_new_size = 0;
+	xfs_inode_init_acls(ip);
 
 	/*
 	 * Initialize inode's trace buffers.
@@ -500,10 +502,7 @@ xfs_ireclaim(
 	 * ilock one but will still hold the iolock.
 	 */
 	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	/*
-	 * Release dquots (and their references) if any.
-	 */
-	XFS_QM_DQDETACH(ip->i_mount, ip);
+	xfs_qm_dqdetach(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
 
 	switch (ip->i_d.di_mode & S_IFMT) {
@@ -561,6 +560,7 @@ xfs_ireclaim(
 	ASSERT(atomic_read(&ip->i_pincount) == 0);
 	ASSERT(!spin_is_locked(&ip->i_flags_lock));
 	ASSERT(completion_done(&ip->i_flush));
+	xfs_inode_clear_acls(ip);
 	kmem_zone_free(xfs_inode_zone, ip);
 }
 
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 123b20c8cbf..1f22d65fed0 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -49,7 +49,6 @@
 #include "xfs_utils.h"
 #include "xfs_dir2_trace.h"
 #include "xfs_quota.h"
-#include "xfs_acl.h"
 #include "xfs_filestream.h"
 #include "xfs_vnodeops.h"
 
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index f879c1bc4b9..77016702938 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -18,6 +18,7 @@
 #ifndef	__XFS_INODE_H__
 #define	__XFS_INODE_H__
 
+struct posix_acl;
 struct xfs_dinode;
 struct xfs_inode;
 
@@ -272,6 +273,11 @@ typedef struct xfs_inode {
 	/* VFS inode */
 	struct inode		i_vnode;	/* embedded VFS inode */
 
+#ifdef CONFIG_XFS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
 	/* Trace buffers per inode. */
 #ifdef XFS_INODE_TRACE
 	struct ktrace		*i_trace;	/* general inode trace */
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 5aaa2d7ec15..67ae5555a30 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -385,7 +384,7 @@ xfs_iomap_write_direct(
 	 * Make sure that the dquots are there. This doesn't hold
 	 * the ilock across a disk read.
 	 */
-	error = XFS_QM_DQATTACH(ip->i_mount, ip, XFS_QMOPT_ILOCKED);
+	error = xfs_qm_dqattach_locked(ip, 0);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -444,8 +443,7 @@ xfs_iomap_write_direct(
 	if (error)
 		goto error_out;
 
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip,
-					      qblocks, 0, quota_flag);
+	error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
 	if (error)
 		goto error1;
 
@@ -495,7 +493,7 @@ xfs_iomap_write_direct(
 
 error0:	/* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
 	xfs_bmap_cancel(&free_list);
-	XFS_TRANS_UNRESERVE_QUOTA_NBLKS(mp, tp, ip, qblocks, 0, quota_flag);
+	xfs_trans_unreserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
 
 error1:	/* Just cancel transaction */
 	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
@@ -582,7 +580,7 @@ xfs_iomap_write_delay(
 	 * Make sure that the dquots are there. This doesn't hold
 	 * the ilock across a disk read.
 	 */
-	error = XFS_QM_DQATTACH(mp, ip, XFS_QMOPT_ILOCKED);
+	error = xfs_qm_dqattach_locked(ip, 0);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -684,7 +682,8 @@ xfs_iomap_write_allocate(
 	/*
 	 * Make sure that the dquots are there.
 	 */
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return XFS_ERROR(error);
 
 	offset_fsb = XFS_B_TO_FSBT(mp, offset);
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 7ba450116d4..47da2fb4537 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1975,16 +1975,30 @@ xlog_recover_do_reg_buffer(
 		error = 0;
 		if (buf_f->blf_flags &
 		   (XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) {
+			if (item->ri_buf[i].i_addr == NULL) {
+				cmn_err(CE_ALERT,
+					"XFS: NULL dquot in %s.", __func__);
+				goto next;
+			}
+			if (item->ri_buf[i].i_len < sizeof(xfs_dqblk_t)) {
+				cmn_err(CE_ALERT,
+					"XFS: dquot too small (%d) in %s.",
+					item->ri_buf[i].i_len, __func__);
+				goto next;
+			}
 			error = xfs_qm_dqcheck((xfs_disk_dquot_t *)
 					       item->ri_buf[i].i_addr,
 					       -1, 0, XFS_QMOPT_DOWARN,
 					       "dquot_buf_recover");
+			if (error)
+				goto next;
 		}
-		if (!error)
-			memcpy(xfs_buf_offset(bp,
-				(uint)bit << XFS_BLI_SHIFT),	/* dest */
-				item->ri_buf[i].i_addr,		/* source */
-				nbits<<XFS_BLI_SHIFT);		/* length */
+
+		memcpy(xfs_buf_offset(bp,
+			(uint)bit << XFS_BLI_SHIFT),	/* dest */
+			item->ri_buf[i].i_addr,		/* source */
+			nbits<<XFS_BLI_SHIFT);		/* length */
+ next:
 		i++;
 		bit += nbits;
 	}
@@ -2615,7 +2629,19 @@ xlog_recover_do_dquot_trans(
 		return (0);
 
 	recddq = (xfs_disk_dquot_t *)item->ri_buf[1].i_addr;
-	ASSERT(recddq);
+
+	if (item->ri_buf[1].i_addr == NULL) {
+		cmn_err(CE_ALERT,
+			"XFS: NULL dquot in %s.", __func__);
+		return XFS_ERROR(EIO);
+	}
+	if (item->ri_buf[1].i_len < sizeof(xfs_dqblk_t)) {
+		cmn_err(CE_ALERT,
+			"XFS: dquot too small (%d) in %s.",
+			item->ri_buf[1].i_len, __func__);
+		return XFS_ERROR(EIO);
+	}
+
 	/*
 	 * This type of quotas was turned off, so ignore this record.
 	 */
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 65a99725d0c..5c6f092659c 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -960,6 +960,53 @@ xfs_check_sizes(xfs_mount_t *mp)
 }
 
 /*
+ * Clear the quotaflags in memory and in the superblock.
+ */
+int
+xfs_mount_reset_sbqflags(
+	struct xfs_mount	*mp)
+{
+	int			error;
+	struct xfs_trans	*tp;
+
+	mp->m_qflags = 0;
+
+	/*
+	 * It is OK to look at sb_qflags here in mount path,
+	 * without m_sb_lock.
+	 */
+	if (mp->m_sb.sb_qflags == 0)
+		return 0;
+	spin_lock(&mp->m_sb_lock);
+	mp->m_sb.sb_qflags = 0;
+	spin_unlock(&mp->m_sb_lock);
+
+	/*
+	 * If the fs is readonly, let the incore superblock run
+	 * with quotas off but don't flush the update out to disk
+	 */
+	if (mp->m_flags & XFS_MOUNT_RDONLY)
+		return 0;
+
+#ifdef QUOTADEBUG
+	xfs_fs_cmn_err(CE_NOTE, mp, "Writing superblock quota changes");
+#endif
+
+	tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SBCHANGE);
+	error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
+				      XFS_DEFAULT_LOG_COUNT);
+	if (error) {
+		xfs_trans_cancel(tp, 0);
+		xfs_fs_cmn_err(CE_ALERT, mp,
+			"xfs_mount_reset_sbqflags: Superblock update failed!");
+		return error;
+	}
+
+	xfs_mod_sb(tp, XFS_SB_QFLAGS);
+	return xfs_trans_commit(tp, 0);
+}
+
+/*
  * This function does the following on an initial mount of a file system:
  *	- reads the superblock from disk and init the mount struct
  *	- if we're a 32-bit kernel, do a size check on the superblock
@@ -976,7 +1023,8 @@ xfs_mountfs(
 	xfs_sb_t	*sbp = &(mp->m_sb);
 	xfs_inode_t	*rip;
 	__uint64_t	resblks;
-	uint		quotamount, quotaflags;
+	uint		quotamount = 0;
+	uint		quotaflags = 0;
 	int		error = 0;
 
 	xfs_mount_common(mp, sbp);
@@ -1210,9 +1258,28 @@ xfs_mountfs(
 	/*
 	 * Initialise the XFS quota management subsystem for this mount
 	 */
-	error = XFS_QM_INIT(mp, &quotamount, &quotaflags);
-	if (error)
-		goto out_rtunmount;
+	if (XFS_IS_QUOTA_RUNNING(mp)) {
+		error = xfs_qm_newmount(mp, &quotamount, &quotaflags);
+		if (error)
+			goto out_rtunmount;
+	} else {
+		ASSERT(!XFS_IS_QUOTA_ON(mp));
+
+		/*
+		 * If a file system had quotas running earlier, but decided to
+		 * mount without -o uquota/pquota/gquota options, revoke the
+		 * quotachecked license.
+		 */
+		if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
+			cmn_err(CE_NOTE,
+				"XFS: resetting qflags for filesystem %s",
+				mp->m_fsname);
+
+			error = xfs_mount_reset_sbqflags(mp);
+			if (error)
+				return error;
+		}
+	}
 
 	/*
 	 * Finish recovering the file system.  This part needed to be
@@ -1228,9 +1295,19 @@ xfs_mountfs(
 	/*
 	 * Complete the quota initialisation, post-log-replay component.
 	 */
-	error = XFS_QM_MOUNT(mp, quotamount, quotaflags);
-	if (error)
-		goto out_rtunmount;
+	if (quotamount) {
+		ASSERT(mp->m_qflags == 0);
+		mp->m_qflags = quotaflags;
+
+		xfs_qm_mount_quotas(mp);
+	}
+
+#if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
+	if (XFS_IS_QUOTA_ON(mp))
+		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas turned on");
+	else
+		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas not turned on");
+#endif
 
 	/*
 	 * Now we are mounted, reserve a small amount of unused space for
@@ -1279,12 +1356,7 @@ xfs_unmountfs(
 	__uint64_t		resblks;
 	int			error;
 
-	/*
-	 * Release dquot that rootinode, rbmino and rsumino might be holding,
-	 * and release the quota inodes.
-	 */
-	XFS_QM_UNMOUNT(mp);
-
+	xfs_qm_unmount_quotas(mp);
 	xfs_rtunmount_inodes(mp);
 	IRELE(mp->m_rootip);
 
@@ -1299,12 +1371,9 @@ xfs_unmountfs(
 	 * need to force the log first.
 	 */
 	xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE | XFS_LOG_SYNC);
-	xfs_reclaim_inodes(mp, 0, XFS_IFLUSH_ASYNC);
-
-	XFS_QM_DQPURGEALL(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_UMOUNTING);
+	xfs_reclaim_inodes(mp, XFS_IFLUSH_ASYNC);
 
-	if (mp->m_quotainfo)
-		XFS_QM_DONE(mp);
+	xfs_qm_unmount(mp);
 
 	/*
 	 * Flush out the log synchronously so that we know for sure
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index d6a64392f98..a5122382afd 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -64,6 +64,8 @@ struct xfs_swapext;
 struct xfs_mru_cache;
 struct xfs_nameops;
 struct xfs_ail;
+struct xfs_quotainfo;
+
 
 /*
  * Prototypes and functions for the Data Migration subsystem.
@@ -107,86 +109,6 @@ typedef struct xfs_dmops {
 	(*(mp)->m_dm_ops->xfs_send_unmount)(mp,ip,right,mode,rval,fl)
 
 
-/*
- * Prototypes and functions for the Quota Management subsystem.
- */
-
-struct xfs_dquot;
-struct xfs_dqtrxops;
-struct xfs_quotainfo;
-
-typedef int	(*xfs_qminit_t)(struct xfs_mount *, uint *, uint *);
-typedef int	(*xfs_qmmount_t)(struct xfs_mount *, uint, uint);
-typedef void	(*xfs_qmunmount_t)(struct xfs_mount *);
-typedef void	(*xfs_qmdone_t)(struct xfs_mount *);
-typedef void	(*xfs_dqrele_t)(struct xfs_dquot *);
-typedef int	(*xfs_dqattach_t)(struct xfs_inode *, uint);
-typedef void	(*xfs_dqdetach_t)(struct xfs_inode *);
-typedef int	(*xfs_dqpurgeall_t)(struct xfs_mount *, uint);
-typedef int	(*xfs_dqvopalloc_t)(struct xfs_mount *,
-			struct xfs_inode *, uid_t, gid_t, prid_t, uint,
-			struct xfs_dquot **, struct xfs_dquot **);
-typedef void	(*xfs_dqvopcreate_t)(struct xfs_trans *, struct xfs_inode *,
-			struct xfs_dquot *, struct xfs_dquot *);
-typedef int	(*xfs_dqvoprename_t)(struct xfs_inode **);
-typedef struct xfs_dquot * (*xfs_dqvopchown_t)(
-			struct xfs_trans *, struct xfs_inode *,
-			struct xfs_dquot **, struct xfs_dquot *);
-typedef int	(*xfs_dqvopchownresv_t)(struct xfs_trans *, struct xfs_inode *,
-			struct xfs_dquot *, struct xfs_dquot *, uint);
-typedef void	(*xfs_dqstatvfs_t)(struct xfs_inode *, struct kstatfs *);
-typedef int	(*xfs_dqsync_t)(struct xfs_mount *, int flags);
-
-typedef struct xfs_qmops {
-	xfs_qminit_t		xfs_qminit;
-	xfs_qmdone_t		xfs_qmdone;
-	xfs_qmmount_t		xfs_qmmount;
-	xfs_qmunmount_t		xfs_qmunmount;
-	xfs_dqrele_t		xfs_dqrele;
-	xfs_dqattach_t		xfs_dqattach;
-	xfs_dqdetach_t		xfs_dqdetach;
-	xfs_dqpurgeall_t	xfs_dqpurgeall;
-	xfs_dqvopalloc_t	xfs_dqvopalloc;
-	xfs_dqvopcreate_t	xfs_dqvopcreate;
-	xfs_dqvoprename_t	xfs_dqvoprename;
-	xfs_dqvopchown_t	xfs_dqvopchown;
-	xfs_dqvopchownresv_t	xfs_dqvopchownresv;
-	xfs_dqstatvfs_t		xfs_dqstatvfs;
-	xfs_dqsync_t		xfs_dqsync;
-	struct xfs_dqtrxops	*xfs_dqtrxops;
-} xfs_qmops_t;
-
-#define XFS_QM_INIT(mp, mnt, fl) \
-	(*(mp)->m_qm_ops->xfs_qminit)(mp, mnt, fl)
-#define XFS_QM_MOUNT(mp, mnt, fl) \
-	(*(mp)->m_qm_ops->xfs_qmmount)(mp, mnt, fl)
-#define XFS_QM_UNMOUNT(mp) \
-	(*(mp)->m_qm_ops->xfs_qmunmount)(mp)
-#define XFS_QM_DONE(mp) \
-	(*(mp)->m_qm_ops->xfs_qmdone)(mp)
-#define XFS_QM_DQRELE(mp, dq) \
-	(*(mp)->m_qm_ops->xfs_dqrele)(dq)
-#define XFS_QM_DQATTACH(mp, ip, fl) \
-	(*(mp)->m_qm_ops->xfs_dqattach)(ip, fl)
-#define XFS_QM_DQDETACH(mp, ip) \
-	(*(mp)->m_qm_ops->xfs_dqdetach)(ip)
-#define XFS_QM_DQPURGEALL(mp, fl) \
-	(*(mp)->m_qm_ops->xfs_dqpurgeall)(mp, fl)
-#define XFS_QM_DQVOPALLOC(mp, ip, uid, gid, prid, fl, dq1, dq2) \
-	(*(mp)->m_qm_ops->xfs_dqvopalloc)(mp, ip, uid, gid, prid, fl, dq1, dq2)
-#define XFS_QM_DQVOPCREATE(mp, tp, ip, dq1, dq2) \
-	(*(mp)->m_qm_ops->xfs_dqvopcreate)(tp, ip, dq1, dq2)
-#define XFS_QM_DQVOPRENAME(mp, ip) \
-	(*(mp)->m_qm_ops->xfs_dqvoprename)(ip)
-#define XFS_QM_DQVOPCHOWN(mp, tp, ip, dqp, dq) \
-	(*(mp)->m_qm_ops->xfs_dqvopchown)(tp, ip, dqp, dq)
-#define XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, dq1, dq2, fl) \
-	(*(mp)->m_qm_ops->xfs_dqvopchownresv)(tp, ip, dq1, dq2, fl)
-#define XFS_QM_DQSTATVFS(ip, statp) \
-	(*(ip)->i_mount->m_qm_ops->xfs_dqstatvfs)(ip, statp)
-#define XFS_QM_DQSYNC(mp, flags) \
-	(*(mp)->m_qm_ops->xfs_dqsync)(mp, flags)
-
 #ifdef HAVE_PERCPU_SB
 
 /*
@@ -510,8 +432,6 @@ extern int	xfs_sb_validate_fsb_count(struct xfs_sb *, __uint64_t);
 
 extern int	xfs_dmops_get(struct xfs_mount *);
 extern void	xfs_dmops_put(struct xfs_mount *);
-extern int	xfs_qmops_get(struct xfs_mount *);
-extern void	xfs_qmops_put(struct xfs_mount *);
 
 extern struct xfs_dmops xfs_dmcore_xfs;
 
diff --git a/fs/xfs/xfs_qmops.c b/fs/xfs/xfs_qmops.c
deleted file mode 100644
index e101790ea8e..00000000000
--- a/fs/xfs/xfs_qmops.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_log.h"
-#include "xfs_inum.h"
-#include "xfs_trans.h"
-#include "xfs_sb.h"
-#include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
-#include "xfs_mount.h"
-#include "xfs_quota.h"
-#include "xfs_error.h"
-
-
-STATIC struct xfs_dquot *
-xfs_dqvopchown_default(
-	struct xfs_trans	*tp,
-	struct xfs_inode	*ip,
-	struct xfs_dquot	**dqp,
-	struct xfs_dquot	*dq)
-{
-	return NULL;
-}
-
-/*
- * Clear the quotaflags in memory and in the superblock.
- */
-int
-xfs_mount_reset_sbqflags(xfs_mount_t *mp)
-{
-	int			error;
-	xfs_trans_t		*tp;
-
-	mp->m_qflags = 0;
-	/*
-	 * It is OK to look at sb_qflags here in mount path,
-	 * without m_sb_lock.
-	 */
-	if (mp->m_sb.sb_qflags == 0)
-		return 0;
-	spin_lock(&mp->m_sb_lock);
-	mp->m_sb.sb_qflags = 0;
-	spin_unlock(&mp->m_sb_lock);
-
-	/*
-	 * if the fs is readonly, let the incore superblock run
-	 * with quotas off but don't flush the update out to disk
-	 */
-	if (mp->m_flags & XFS_MOUNT_RDONLY)
-		return 0;
-#ifdef QUOTADEBUG
-	xfs_fs_cmn_err(CE_NOTE, mp, "Writing superblock quota changes");
-#endif
-	tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SBCHANGE);
-	if ((error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
-				      XFS_DEFAULT_LOG_COUNT))) {
-		xfs_trans_cancel(tp, 0);
-		xfs_fs_cmn_err(CE_ALERT, mp,
-			"xfs_mount_reset_sbqflags: Superblock update failed!");
-		return error;
-	}
-	xfs_mod_sb(tp, XFS_SB_QFLAGS);
-	error = xfs_trans_commit(tp, 0);
-	return error;
-}
-
-STATIC int
-xfs_noquota_init(
-	xfs_mount_t	*mp,
-	uint		*needquotamount,
-	uint		*quotaflags)
-{
-	int		error = 0;
-
-	*quotaflags = 0;
-	*needquotamount = B_FALSE;
-
-	ASSERT(!XFS_IS_QUOTA_ON(mp));
-
-	/*
-	 * If a file system had quotas running earlier, but decided to
-	 * mount without -o uquota/pquota/gquota options, revoke the
-	 * quotachecked license.
-	 */
-	if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
-		cmn_err(CE_NOTE,
-                        "XFS resetting qflags for filesystem %s",
-                        mp->m_fsname);
-
-		error = xfs_mount_reset_sbqflags(mp);
-	}
-	return error;
-}
-
-static struct xfs_qmops xfs_qmcore_stub = {
-	.xfs_qminit		= (xfs_qminit_t) xfs_noquota_init,
-	.xfs_qmdone		= (xfs_qmdone_t) fs_noerr,
-	.xfs_qmmount		= (xfs_qmmount_t) fs_noerr,
-	.xfs_qmunmount		= (xfs_qmunmount_t) fs_noerr,
-	.xfs_dqrele		= (xfs_dqrele_t) fs_noerr,
-	.xfs_dqattach		= (xfs_dqattach_t) fs_noerr,
-	.xfs_dqdetach		= (xfs_dqdetach_t) fs_noerr,
-	.xfs_dqpurgeall		= (xfs_dqpurgeall_t) fs_noerr,
-	.xfs_dqvopalloc		= (xfs_dqvopalloc_t) fs_noerr,
-	.xfs_dqvopcreate	= (xfs_dqvopcreate_t) fs_noerr,
-	.xfs_dqvoprename	= (xfs_dqvoprename_t) fs_noerr,
-	.xfs_dqvopchown		= xfs_dqvopchown_default,
-	.xfs_dqvopchownresv	= (xfs_dqvopchownresv_t) fs_noerr,
-	.xfs_dqstatvfs		= (xfs_dqstatvfs_t) fs_noval,
-	.xfs_dqsync		= (xfs_dqsync_t) fs_noerr,
-};
-
-int
-xfs_qmops_get(struct xfs_mount *mp)
-{
-	if (XFS_IS_QUOTA_RUNNING(mp)) {
-#ifdef CONFIG_XFS_QUOTA
-		mp->m_qm_ops = &xfs_qmcore_xfs;
-#else
-		cmn_err(CE_WARN,
-			"XFS: qouta support not available in this kernel.");
-		return EINVAL;
-#endif
-	} else {
-		mp->m_qm_ops = &xfs_qmcore_stub;
-	}
-
-	return 0;
-}
-
-void
-xfs_qmops_put(struct xfs_mount *mp)
-{
-}
diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h
index f5d1202dde2..3ec91ac74c2 100644
--- a/fs/xfs/xfs_quota.h
+++ b/fs/xfs/xfs_quota.h
@@ -197,7 +197,6 @@ typedef struct xfs_qoff_logformat {
 #define XFS_QMOPT_UMOUNTING	0x0000100 /* filesys is being unmounted */
 #define XFS_QMOPT_DOLOG		0x0000200 /* log buf changes (in quotacheck) */
 #define XFS_QMOPT_DOWARN        0x0000400 /* increase warning cnt if needed */
-#define XFS_QMOPT_ILOCKED	0x0000800 /* inode is already locked (excl) */
 #define XFS_QMOPT_DQREPAIR	0x0001000 /* repair dquot if damaged */
 #define XFS_QMOPT_GQUOTA	0x0002000 /* group dquot requested */
 #define XFS_QMOPT_ENOSPC	0x0004000 /* enospc instead of edquot (prj) */
@@ -302,69 +301,79 @@ typedef struct xfs_dqtrx {
 	long		qt_delrtb_delta;  /* delayed RT blk count changes */
 } xfs_dqtrx_t;
 
-/*
- * Dquot transaction functions, used if quota is enabled.
- */
-typedef void	(*qo_dup_dqinfo_t)(struct xfs_trans *, struct xfs_trans *);
-typedef void	(*qo_mod_dquot_byino_t)(struct xfs_trans *,
-				struct xfs_inode *, uint, long);
-typedef void	(*qo_free_dqinfo_t)(struct xfs_trans *);
-typedef void	(*qo_apply_dquot_deltas_t)(struct xfs_trans *);
-typedef void	(*qo_unreserve_and_mod_dquots_t)(struct xfs_trans *);
-typedef int	(*qo_reserve_quota_nblks_t)(
-				struct xfs_trans *, struct xfs_mount *,
-				struct xfs_inode *, long, long, uint);
-typedef int	(*qo_reserve_quota_bydquots_t)(
-				struct xfs_trans *, struct xfs_mount *,
-				struct xfs_dquot *, struct xfs_dquot *,
-				long, long, uint);
-typedef struct xfs_dqtrxops {
-	qo_dup_dqinfo_t			qo_dup_dqinfo;
-	qo_free_dqinfo_t		qo_free_dqinfo;
-	qo_mod_dquot_byino_t		qo_mod_dquot_byino;
-	qo_apply_dquot_deltas_t		qo_apply_dquot_deltas;
-	qo_reserve_quota_nblks_t	qo_reserve_quota_nblks;
-	qo_reserve_quota_bydquots_t	qo_reserve_quota_bydquots;
-	qo_unreserve_and_mod_dquots_t	qo_unreserve_and_mod_dquots;
-} xfs_dqtrxops_t;
-
-#define XFS_DQTRXOP(mp, tp, op, args...) \
-		((mp)->m_qm_ops->xfs_dqtrxops ? \
-		((mp)->m_qm_ops->xfs_dqtrxops->op)(tp, ## args) : 0)
-
-#define XFS_DQTRXOP_VOID(mp, tp, op, args...) \
-		((mp)->m_qm_ops->xfs_dqtrxops ? \
-		((mp)->m_qm_ops->xfs_dqtrxops->op)(tp, ## args) : (void)0)
-
-#define XFS_TRANS_DUP_DQINFO(mp, otp, ntp) \
-	XFS_DQTRXOP_VOID(mp, otp, qo_dup_dqinfo, ntp)
-#define XFS_TRANS_FREE_DQINFO(mp, tp) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_free_dqinfo)
-#define XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, field, delta) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_mod_dquot_byino, ip, field, delta)
-#define XFS_TRANS_APPLY_DQUOT_DELTAS(mp, tp) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_apply_dquot_deltas)
-#define XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip, nblks, ninos, fl) \
-	XFS_DQTRXOP(mp, tp, qo_reserve_quota_nblks, mp, ip, nblks, ninos, fl)
-#define XFS_TRANS_RESERVE_QUOTA_BYDQUOTS(mp, tp, ud, gd, nb, ni, fl) \
-	XFS_DQTRXOP(mp, tp, qo_reserve_quota_bydquots, mp, ud, gd, nb, ni, fl)
-#define XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(mp, tp) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_unreserve_and_mod_dquots)
-
-#define XFS_TRANS_UNRESERVE_QUOTA_NBLKS(mp, tp, ip, nblks, ninos, flags) \
-	XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip, -(nblks), -(ninos), flags)
-#define XFS_TRANS_RESERVE_QUOTA(mp, tp, ud, gd, nb, ni, f) \
-	XFS_TRANS_RESERVE_QUOTA_BYDQUOTS(mp, tp, ud, gd, nb, ni, \
-				f | XFS_QMOPT_RES_REGBLKS)
-#define XFS_TRANS_UNRESERVE_QUOTA(mp, tp, ud, gd, nb, ni, f) \
-	XFS_TRANS_RESERVE_QUOTA_BYDQUOTS(mp, tp, ud, gd, -(nb), -(ni), \
+#ifdef CONFIG_XFS_QUOTA
+extern void xfs_trans_dup_dqinfo(struct xfs_trans *, struct xfs_trans *);
+extern void xfs_trans_free_dqinfo(struct xfs_trans *);
+extern void xfs_trans_mod_dquot_byino(struct xfs_trans *, struct xfs_inode *,
+		uint, long);
+extern void xfs_trans_apply_dquot_deltas(struct xfs_trans *);
+extern void xfs_trans_unreserve_and_mod_dquots(struct xfs_trans *);
+extern int xfs_trans_reserve_quota_nblks(struct xfs_trans *,
+		struct xfs_inode *, long, long, uint);
+extern int xfs_trans_reserve_quota_bydquots(struct xfs_trans *,
+		struct xfs_mount *, struct xfs_dquot *,
+		struct xfs_dquot *, long, long, uint);
+
+extern int xfs_qm_vop_dqalloc(struct xfs_inode *, uid_t, gid_t, prid_t, uint,
+		struct xfs_dquot **, struct xfs_dquot **);
+extern void xfs_qm_vop_create_dqattach(struct xfs_trans *, struct xfs_inode *,
+		struct xfs_dquot *, struct xfs_dquot *);
+extern int xfs_qm_vop_rename_dqattach(struct xfs_inode **);
+extern struct xfs_dquot *xfs_qm_vop_chown(struct xfs_trans *,
+		struct xfs_inode *, struct xfs_dquot **, struct xfs_dquot *);
+extern int xfs_qm_vop_chown_reserve(struct xfs_trans *, struct xfs_inode *,
+		struct xfs_dquot *, struct xfs_dquot *, uint);
+extern int xfs_qm_dqattach(struct xfs_inode *, uint);
+extern int xfs_qm_dqattach_locked(struct xfs_inode *, uint);
+extern void xfs_qm_dqdetach(struct xfs_inode *);
+extern void xfs_qm_dqrele(struct xfs_dquot *);
+extern void xfs_qm_statvfs(struct xfs_inode *, struct kstatfs *);
+extern int xfs_qm_sync(struct xfs_mount *, int);
+extern int xfs_qm_newmount(struct xfs_mount *, uint *, uint *);
+extern void xfs_qm_mount_quotas(struct xfs_mount *);
+extern void xfs_qm_unmount(struct xfs_mount *);
+extern void xfs_qm_unmount_quotas(struct xfs_mount *);
+
+#else
+static inline int
+xfs_qm_vop_dqalloc(struct xfs_inode *ip, uid_t uid, gid_t gid, prid_t prid,
+		uint flags, struct xfs_dquot **udqp, struct xfs_dquot **gdqp)
+{
+	*udqp = NULL;
+	*gdqp = NULL;
+	return 0;
+}
+#define xfs_trans_dup_dqinfo(tp, tp2)
+#define xfs_trans_free_dqinfo(tp)
+#define xfs_trans_mod_dquot_byino(tp, ip, fields, delta)
+#define xfs_trans_apply_dquot_deltas(tp)
+#define xfs_trans_unreserve_and_mod_dquots(tp)
+#define xfs_trans_reserve_quota_nblks(tp, ip, nblks, ninos, flags)	(0)
+#define xfs_trans_reserve_quota_bydquots(tp, mp, u, g, nb, ni, fl)	(0)
+#define xfs_qm_vop_create_dqattach(tp, ip, u, g)
+#define xfs_qm_vop_rename_dqattach(it)					(0)
+#define xfs_qm_vop_chown(tp, ip, old, new)				(NULL)
+#define xfs_qm_vop_chown_reserve(tp, ip, u, g, fl)			(0)
+#define xfs_qm_dqattach(ip, fl)						(0)
+#define xfs_qm_dqattach_locked(ip, fl)					(0)
+#define xfs_qm_dqdetach(ip)
+#define xfs_qm_dqrele(d)
+#define xfs_qm_statvfs(ip, s)
+#define xfs_qm_sync(mp, fl)						(0)
+#define xfs_qm_newmount(mp, a, b)					(0)
+#define xfs_qm_mount_quotas(mp)
+#define xfs_qm_unmount(mp)
+#define xfs_qm_unmount_quotas(mp)					(0)
+#endif /* CONFIG_XFS_QUOTA */
+
+#define xfs_trans_unreserve_quota_nblks(tp, ip, nblks, ninos, flags) \
+	xfs_trans_reserve_quota_nblks(tp, ip, -(nblks), -(ninos), flags)
+#define xfs_trans_reserve_quota(tp, mp, ud, gd, nb, ni, f) \
+	xfs_trans_reserve_quota_bydquots(tp, mp, ud, gd, nb, ni, \
 				f | XFS_QMOPT_RES_REGBLKS)
 
 extern int xfs_qm_dqcheck(xfs_disk_dquot_t *, xfs_dqid_t, uint, uint, char *);
 extern int xfs_mount_reset_sbqflags(struct xfs_mount *);
 
-extern struct xfs_qmops xfs_qmcore_xfs;
-
 #endif	/* __KERNEL__ */
-
 #endif	/* __XFS_QUOTA_H__ */
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 58f85e9cd11..b81deea0ce1 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -166,7 +166,8 @@ xfs_rename(
 	/*
 	 * Attach the dquots to the inodes
 	 */
-	if ((error = XFS_QM_DQVOPRENAME(mp, inodes))) {
+	error = xfs_qm_vop_rename_dqattach(inodes);
+	if (error) {
 		xfs_trans_cancel(tp, cancel_flags);
 		goto std_return;
 	}
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index 36f3a21c54d..fea68615ed2 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -41,7 +41,6 @@
 #include "xfs_ialloc.h"
 #include "xfs_attr.h"
 #include "xfs_bmap.h"
-#include "xfs_acl.h"
 #include "xfs_error.h"
 #include "xfs_buf_item.h"
 #include "xfs_rw.h"
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 8570b826fed..66b849358e6 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -297,7 +297,7 @@ xfs_trans_dup(
 	tp->t_rtx_res = tp->t_rtx_res_used;
 	ntp->t_pflags = tp->t_pflags;
 
-	XFS_TRANS_DUP_DQINFO(tp->t_mountp, tp, ntp);
+	xfs_trans_dup_dqinfo(tp, ntp);
 
 	atomic_inc(&tp->t_mountp->m_active_trans);
 	return ntp;
@@ -628,8 +628,6 @@ xfs_trans_apply_sb_deltas(
 		xfs_trans_log_buf(tp, bp, offsetof(xfs_dsb_t, sb_icount),
 				  offsetof(xfs_dsb_t, sb_frextents) +
 				  sizeof(sbp->sb_frextents) - 1);
-
-	tp->t_mountp->m_super->s_dirt = 1;
 }
 
 /*
@@ -831,7 +829,7 @@ shut_us_down:
 		 * means is that we have some (non-persistent) quota
 		 * reservations that need to be unreserved.
 		 */
-		XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(mp, tp);
+		xfs_trans_unreserve_and_mod_dquots(tp);
 		if (tp->t_ticket) {
 			commit_lsn = xfs_log_done(mp, tp->t_ticket,
 							NULL, log_flags);
@@ -850,10 +848,9 @@ shut_us_down:
 	/*
 	 * If we need to update the superblock, then do it now.
 	 */
-	if (tp->t_flags & XFS_TRANS_SB_DIRTY) {
+	if (tp->t_flags & XFS_TRANS_SB_DIRTY)
 		xfs_trans_apply_sb_deltas(tp);
-	}
-	XFS_TRANS_APPLY_DQUOT_DELTAS(mp, tp);
+	xfs_trans_apply_dquot_deltas(tp);
 
 	/*
 	 * Ask each log item how many log_vector entries it will
@@ -1058,7 +1055,7 @@ xfs_trans_uncommit(
 	}
 
 	xfs_trans_unreserve_and_mod_sb(tp);
-	XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(tp->t_mountp, tp);
+	xfs_trans_unreserve_and_mod_dquots(tp);
 
 	xfs_trans_free_items(tp, flags);
 	xfs_trans_free_busy(tp);
@@ -1183,7 +1180,7 @@ xfs_trans_cancel(
 	}
 #endif
 	xfs_trans_unreserve_and_mod_sb(tp);
-	XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(mp, tp);
+	xfs_trans_unreserve_and_mod_dquots(tp);
 
 	if (tp->t_ticket) {
 		if (flags & XFS_TRANS_RELEASE_LOG_RES) {
@@ -1213,7 +1210,7 @@ xfs_trans_free(
 	xfs_trans_t	*tp)
 {
 	atomic_dec(&tp->t_mountp->m_active_trans);
-	XFS_TRANS_FREE_DQINFO(tp->t_mountp, tp);
+	xfs_trans_free_dqinfo(tp);
 	kmem_zone_free(xfs_trans_zone, tp);
 }
 
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 79b9e5ea535..4d88616bde9 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -166,7 +166,7 @@ xfs_dir_ialloc(
 			xfs_buf_relse(ialloc_context);
 			if (dqinfo) {
 				tp->t_dqinfo = dqinfo;
-				XFS_TRANS_FREE_DQINFO(tp->t_mountp, tp);
+				xfs_trans_free_dqinfo(tp);
 			}
 			*tpp = ntp;
 			*ipp = NULL;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 19cf90a9c76..c4eca5ed5da 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -42,6 +42,7 @@
 #include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_bmap.h"
+#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_rw.h"
 #include "xfs_error.h"
@@ -118,7 +119,7 @@ xfs_setattr(
 		 */
 		ASSERT(udqp == NULL);
 		ASSERT(gdqp == NULL);
-		code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, ip->i_d.di_projid,
+		code = xfs_qm_vop_dqalloc(ip, uid, gid, ip->i_d.di_projid,
 					 qflags, &udqp, &gdqp);
 		if (code)
 			return code;
@@ -180,10 +181,11 @@ xfs_setattr(
 		 * Do a quota reservation only if uid/gid is actually
 		 * going to change.
 		 */
-		if ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) ||
-		    (XFS_IS_GQUOTA_ON(mp) && igid != gid)) {
+		if (XFS_IS_QUOTA_RUNNING(mp) &&
+		    ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) ||
+		     (XFS_IS_GQUOTA_ON(mp) && igid != gid))) {
 			ASSERT(tp);
-			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
+			code = xfs_qm_vop_chown_reserve(tp, ip, udqp, gdqp,
 						capable(CAP_FOWNER) ?
 						XFS_QMOPT_FORCE_RES : 0);
 			if (code)	/* out of quota */
@@ -217,7 +219,7 @@ xfs_setattr(
 		/*
 		 * Make sure that the dquots are attached to the inode.
 		 */
-		code = XFS_QM_DQATTACH(mp, ip, XFS_QMOPT_ILOCKED);
+		code = xfs_qm_dqattach_locked(ip, 0);
 		if (code)
 			goto error_return;
 
@@ -351,21 +353,21 @@ xfs_setattr(
 		 * in the transaction.
 		 */
 		if (iuid != uid) {
-			if (XFS_IS_UQUOTA_ON(mp)) {
+			if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_UQUOTA_ON(mp)) {
 				ASSERT(mask & ATTR_UID);
 				ASSERT(udqp);
-				olddquot1 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+				olddquot1 = xfs_qm_vop_chown(tp, ip,
 							&ip->i_udquot, udqp);
 			}
 			ip->i_d.di_uid = uid;
 			inode->i_uid = uid;
 		}
 		if (igid != gid) {
-			if (XFS_IS_GQUOTA_ON(mp)) {
+			if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_GQUOTA_ON(mp)) {
 				ASSERT(!XFS_IS_PQUOTA_ON(mp));
 				ASSERT(mask & ATTR_GID);
 				ASSERT(gdqp);
-				olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+				olddquot2 = xfs_qm_vop_chown(tp, ip,
 							&ip->i_gdquot, gdqp);
 			}
 			ip->i_d.di_gid = gid;
@@ -461,13 +463,25 @@ xfs_setattr(
 	/*
 	 * Release any dquot(s) the inode had kept before chown.
 	 */
-	XFS_QM_DQRELE(mp, olddquot1);
-	XFS_QM_DQRELE(mp, olddquot2);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(olddquot1);
+	xfs_qm_dqrele(olddquot2);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
-	if (code) {
+	if (code)
 		return code;
+
+	/*
+	 * XXX(hch): Updating the ACL entries is not atomic vs the i_mode
+	 * 	     update.  We could avoid this with linked transactions
+	 * 	     and passing down the transaction pointer all the way
+	 *	     to attr_set.  No previous user of the generic
+	 * 	     Posix ACL code seems to care about this issue either.
+	 */
+	if ((mask & ATTR_MODE) && !(flags & XFS_ATTR_NOACL)) {
+		code = -xfs_acl_chmod(inode);
+		if (code)
+			return XFS_ERROR(code);
 	}
 
 	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
@@ -482,8 +496,8 @@ xfs_setattr(
 	commit_flags |= XFS_TRANS_ABORT;
 	/* FALLTHROUGH */
  error_return:
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 	if (tp) {
 		xfs_trans_cancel(tp, commit_flags);
 	}
@@ -739,7 +753,8 @@ xfs_free_eofblocks(
 		/*
 		 * Attach the dquots to the inode up front.
 		 */
-		if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+		error = xfs_qm_dqattach(ip, 0);
+		if (error)
 			return error;
 
 		/*
@@ -1181,7 +1196,8 @@ xfs_inactive(
 
 	ASSERT(ip->i_d.di_nlink == 0);
 
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return VN_INACTIVE_CACHE;
 
 	tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
@@ -1307,7 +1323,7 @@ xfs_inactive(
 		/*
 		 * Credit the quota account(s). The inode is gone.
 		 */
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_ICOUNT, -1);
+		xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_ICOUNT, -1);
 
 		/*
 		 * Just ignore errors at this point.  There is nothing we can
@@ -1323,11 +1339,11 @@ xfs_inactive(
 			xfs_fs_cmn_err(CE_NOTE, mp, "xfs_inactive: "
 				"xfs_trans_commit() returned error %d", error);
 	}
+
 	/*
 	 * Release the dquots held by inode, if any.
 	 */
-	XFS_QM_DQDETACH(mp, ip);
-
+	xfs_qm_dqdetach(ip);
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
 
  out:
@@ -1427,8 +1443,7 @@ xfs_create(
 	/*
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
-	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(), current_fsgid(), prid,
+	error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -1489,7 +1504,7 @@ xfs_create(
 	/*
 	 * Reserve disk quota and the inode.
 	 */
-	error = XFS_TRANS_RESERVE_QUOTA(mp, tp, udqp, gdqp, resblks, 1, 0);
+	error = xfs_trans_reserve_quota(tp, mp, udqp, gdqp, resblks, 1, 0);
 	if (error)
 		goto out_trans_cancel;
 
@@ -1561,7 +1576,7 @@ xfs_create(
 	 * These ids of the inode couldn't have changed since the new
 	 * inode has been locked ever since it was created.
 	 */
-	XFS_QM_DQVOPCREATE(mp, tp, ip, udqp, gdqp);
+	xfs_qm_vop_create_dqattach(tp, ip, udqp, gdqp);
 
 	/*
 	 * xfs_trans_commit normally decrements the vnode ref count
@@ -1580,8 +1595,8 @@ xfs_create(
 		goto out_dqrele;
 	}
 
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	*ipp = ip;
 
@@ -1602,8 +1617,8 @@ xfs_create(
  out_trans_cancel:
 	xfs_trans_cancel(tp, cancel_flags);
  out_dqrele:
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
@@ -1837,11 +1852,11 @@ xfs_remove(
 			return error;
 	}
 
-	error = XFS_QM_DQATTACH(mp, dp, 0);
+	error = xfs_qm_dqattach(dp, 0);
 	if (error)
 		goto std_return;
 
-	error = XFS_QM_DQATTACH(mp, ip, 0);
+	error = xfs_qm_dqattach(ip, 0);
 	if (error)
 		goto std_return;
 
@@ -2028,11 +2043,11 @@ xfs_link(
 
 	/* Return through std_return after this point. */
 
-	error = XFS_QM_DQATTACH(mp, sip, 0);
+	error = xfs_qm_dqattach(sip, 0);
 	if (error)
 		goto std_return;
 
-	error = XFS_QM_DQATTACH(mp, tdp, 0);
+	error = xfs_qm_dqattach(tdp, 0);
 	if (error)
 		goto std_return;
 
@@ -2205,8 +2220,7 @@ xfs_symlink(
 	/*
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
-	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(), current_fsgid(), prid,
+	error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -2248,7 +2262,7 @@ xfs_symlink(
 	/*
 	 * Reserve disk quota : blocks and inode.
 	 */
-	error = XFS_TRANS_RESERVE_QUOTA(mp, tp, udqp, gdqp, resblks, 1, 0);
+	error = xfs_trans_reserve_quota(tp, mp, udqp, gdqp, resblks, 1, 0);
 	if (error)
 		goto error_return;
 
@@ -2288,7 +2302,7 @@ xfs_symlink(
 	/*
 	 * Also attach the dquot(s) to it, if applicable.
 	 */
-	XFS_QM_DQVOPCREATE(mp, tp, ip, udqp, gdqp);
+	xfs_qm_vop_create_dqattach(tp, ip, udqp, gdqp);
 
 	if (resblks)
 		resblks -= XFS_IALLOC_SPACE_RES(mp);
@@ -2376,8 +2390,8 @@ xfs_symlink(
 		goto error2;
 	}
 	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	/* Fall through to std_return with error = 0 or errno from
 	 * xfs_trans_commit	*/
@@ -2401,8 +2415,8 @@ std_return:
 	cancel_flags |= XFS_TRANS_ABORT;
  error_return:
 	xfs_trans_cancel(tp, cancel_flags);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
@@ -2541,7 +2555,8 @@ xfs_alloc_file_space(
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return error;
 
 	if (len <= 0)
@@ -2628,8 +2643,8 @@ retry:
 			break;
 		}
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip,
-						      qblocks, 0, quota_flag);
+		error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks,
+						      0, quota_flag);
 		if (error)
 			goto error1;
 
@@ -2688,7 +2703,7 @@ dmapi_enospc_check:
 
 error0:	/* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
 	xfs_bmap_cancel(&free_list);
-	XFS_TRANS_UNRESERVE_QUOTA_NBLKS(mp, tp, ip, qblocks, 0, quota_flag);
+	xfs_trans_unreserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
 
 error1:	/* Just cancel transaction */
 	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
@@ -2827,7 +2842,8 @@ xfs_free_file_space(
 
 	xfs_itrace_entry(ip);
 
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return error;
 
 	error = 0;
@@ -2953,9 +2969,9 @@ xfs_free_file_space(
 			break;
 		}
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		error = XFS_TRANS_RESERVE_QUOTA(mp, tp,
-				ip->i_udquot, ip->i_gdquot, resblks, 0,
-				XFS_QMOPT_RES_REGBLKS);
+		error = xfs_trans_reserve_quota(tp, mp,
+				ip->i_udquot, ip->i_gdquot,
+				resblks, 0, XFS_QMOPT_RES_REGBLKS);
 		if (error)
 			goto error1;
 
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 04373c6c61f..a9e102de71a 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -18,6 +18,7 @@ int xfs_setattr(struct xfs_inode *ip, struct iattr *vap, int flags);
 #define	XFS_ATTR_DMI		0x01	/* invocation from a DMI function */
 #define	XFS_ATTR_NONBLOCK	0x02	/* return EAGAIN if operation would block */
 #define XFS_ATTR_NOLOCK		0x04	/* Don't grab any conflicting locks */
+#define XFS_ATTR_NOACL		0x08	/* Don't call xfs_acl_chmod */
 
 int xfs_readlink(struct xfs_inode *ip, char *link);
 int xfs_fsync(struct xfs_inode *ip);
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 4db89e98535..82ec6a3c050 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20090320
+#define ACPI_CA_VERSION                 0x20090521
 
 #include "actypes.h"
 #include "actbl.h"
@@ -201,6 +201,8 @@ acpi_evaluate_object_typed(acpi_handle object,
 acpi_status
 acpi_get_object_info(acpi_handle handle, struct acpi_buffer *return_buffer);
 
+acpi_status acpi_install_method(u8 *buffer);
+
 acpi_status
 acpi_get_next_object(acpi_object_type type,
 		     acpi_handle parent,
@@ -375,7 +377,7 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
 acpi_status acpi_leave_sleep_state(u8 sleep_state);
 
 /*
- * Debug output
+ * Error/Warning output
  */
 void ACPI_INTERNAL_VAR_XFACE
 acpi_error(const char *module_name,
@@ -394,6 +396,9 @@ void ACPI_INTERNAL_VAR_XFACE
 acpi_info(const char *module_name,
 	  u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
 
+/*
+ * Debug output
+ */
 #ifdef ACPI_DEBUG_OUTPUT
 
 void ACPI_INTERNAL_VAR_XFACE
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index f555d927f7c..37ba576d06e 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -429,20 +429,12 @@ typedef unsigned long long acpi_integer;
 
 /* Data manipulation */
 
-#define ACPI_LOWORD(l)                  ((u16)(u32)(l))
-#define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
-#define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
-#define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
-
-/* Full 64-bit integer must be available on both 32-bit and 64-bit platforms */
-
-struct acpi_integer_overlay {
-	u32 lo_dword;
-	u32 hi_dword;
-};
-
-#define ACPI_LODWORD(integer)           (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword)
-#define ACPI_HIDWORD(integer)           (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword)
+#define ACPI_LOBYTE(integer)            ((u8)   (u16)(integer))
+#define ACPI_HIBYTE(integer)            ((u8) (((u16)(integer)) >> 8))
+#define ACPI_LOWORD(integer)            ((u16)  (u32)(integer))
+#define ACPI_HIWORD(integer)            ((u16)(((u32)(integer)) >> 16))
+#define ACPI_LODWORD(integer64)         ((u32)  (u64)(integer64))
+#define ACPI_HIDWORD(integer64)         ((u32)(((u64)(integer64)) >> 32))
 
 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
index 8e2cdc57b19..935c5d7fc86 100644
--- a/include/acpi/platform/acgcc.h
+++ b/include/acpi/platform/acgcc.h
@@ -62,4 +62,8 @@
  */
 #define ACPI_UNUSED_VAR __attribute__ ((unused))
 
+#ifdef _ANSI
+#define inline
+#endif
+
 #endif				/* __ACGCC_H__ */
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 6d49b2a498c..fcb8e4b159b 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -1,11 +1,11 @@
 /******************************************************************************
  *
- * Name: aclinux.h - OS specific defines, etc.
+ * Name: aclinux.h - OS specific defines, etc. for Linux
  *
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2009, Intel Corp.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -44,10 +44,13 @@
 #ifndef __ACLINUX_H__
 #define __ACLINUX_H__
 
+/* Common (in-kernel/user-space) ACPICA configuration */
+
 #define ACPI_USE_SYSTEM_CLIBRARY
 #define ACPI_USE_DO_WHILE_0
 #define ACPI_MUTEX_TYPE             ACPI_BINARY_SEMAPHORE
 
+
 #ifdef __KERNEL__
 
 #include <linux/string.h>
@@ -63,15 +66,18 @@
 #include <linux/spinlock_types.h>
 #include <asm/current.h>
 
-/* Host-dependent types and defines */
+/* Host-dependent types and defines for in-kernel ACPICA */
 
 #define ACPI_MACHINE_WIDTH          BITS_PER_LONG
-#define acpi_cache_t                        struct kmem_cache
-#define acpi_spinlock                   spinlock_t *
 #define ACPI_EXPORT_SYMBOL(symbol)  EXPORT_SYMBOL(symbol);
 #define strtoul                     simple_strtoul
 
-#else				/* !__KERNEL__ */
+#define acpi_cache_t                        struct kmem_cache
+#define acpi_spinlock                       spinlock_t *
+#define acpi_cpu_flags                      unsigned long
+#define acpi_thread_id                      struct task_struct *
+
+#else /* !__KERNEL__ */
 
 #include <stdarg.h>
 #include <string.h>
@@ -79,6 +85,11 @@
 #include <ctype.h>
 #include <unistd.h>
 
+/* Host-dependent types and defines for user-space ACPICA */
+
+#define ACPI_FLUSH_CPU_CACHE()
+#define acpi_thread_id                      pthread_t
+
 #if defined(__ia64__) || defined(__x86_64__)
 #define ACPI_MACHINE_WIDTH          64
 #define COMPILER_DEPENDENT_INT64    long
@@ -94,17 +105,17 @@
 #define __cdecl
 #endif
 
-#define ACPI_FLUSH_CPU_CACHE()
-#endif				/* __KERNEL__ */
+#endif /* __KERNEL__ */
 
 /* Linux uses GCC */
 
 #include "acgcc.h"
 
-#define acpi_cpu_flags unsigned long
-
-#define acpi_thread_id struct task_struct *
 
+#ifdef __KERNEL__
+/*
+ * Overrides for in-kernel ACPICA
+ */
 static inline acpi_thread_id acpi_os_get_thread_id(void)
 {
 	return current;
@@ -119,30 +130,32 @@ static inline acpi_thread_id acpi_os_get_thread_id(void)
 #include <acpi/actypes.h>
 static inline void *acpi_os_allocate(acpi_size size)
 {
-	return kmalloc(size, irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
+	return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 }
+
 static inline void *acpi_os_allocate_zeroed(acpi_size size)
 {
-	return kzalloc(size, irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
+	return kzalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 }
 
 static inline void *acpi_os_acquire_object(acpi_cache_t * cache)
 {
 	return kmem_cache_zalloc(cache,
-				 irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
+		irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 }
 
-#define ACPI_ALLOCATE(a)	acpi_os_allocate(a)
-#define ACPI_ALLOCATE_ZEROED(a)	acpi_os_allocate_zeroed(a)
-#define ACPI_FREE(a)		kfree(a)
+#define ACPI_ALLOCATE(a)        acpi_os_allocate(a)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed(a)
+#define ACPI_FREE(a)            kfree(a)
 
-/*
- * We need to show where it is safe to preempt execution of ACPICA
- */
-#define ACPI_PREEMPTION_POINT()		\
-	do {				\
-		if (!irqs_disabled())	\
-			cond_resched();	\
+/* Used within ACPICA to show where it is safe to preempt execution */
+
+#define ACPI_PREEMPTION_POINT() \
+	do { \
+		if (!irqs_disabled()) \
+			cond_resched(); \
 	} while (0)
 
-#endif				/* __ACLINUX_H__ */
+#endif /* __KERNEL__ */
+
+#endif /* __ACLINUX_H__ */
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
index 4c9932a2503..eb62334cda2 100644
--- a/include/asm-generic/Kbuild
+++ b/include/asm-generic/Kbuild
@@ -1,11 +1,33 @@
+header-y += auxvec.h
+header-y += bitsperlong.h
 header-y += errno-base.h
 header-y += errno.h
 header-y += fcntl.h
 header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman-common.h
 header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
 header-y += poll.h
+header-y += posix_types.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += shmparam.h
+header-y += signal-defs.h
 header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
 header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
 
 unifdef-y += int-l64.h
 unifdef-y += int-ll64.h
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 70d185534b9..290910e4ede 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -9,6 +9,7 @@ unifdef-y += a.out.h
 endif
 unifdef-y += auxvec.h
 unifdef-y += byteorder.h
+unifdef-y += bitsperlong.h
 unifdef-y += errno.h
 unifdef-y += fcntl.h
 unifdef-y += ioctl.h
diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h
new file mode 100644
index 00000000000..b7babf0206b
--- /dev/null
+++ b/include/asm-generic/atomic-long.h
@@ -0,0 +1,258 @@
+#ifndef _ASM_GENERIC_ATOMIC_LONG_H
+#define _ASM_GENERIC_ATOMIC_LONG_H
+/*
+ * Copyright (C) 2005 Silicon Graphics, Inc.
+ *	Christoph Lameter
+ *
+ * Allows to provide arch independent atomic definitions without the need to
+ * edit all arch specific atomic.h files.
+ */
+
+#include <asm/types.h>
+
+/*
+ * Suppport for atomic_long_t
+ *
+ * Casts for parameters are avoided for existing atomic functions in order to
+ * avoid issues with cast-as-lval under gcc 4.x and other limitations that the
+ * macros of a platform may have.
+ */
+
+#if BITS_PER_LONG == 64
+
+typedef atomic64_t atomic_long_t;
+
+#define ATOMIC_LONG_INIT(i)	ATOMIC64_INIT(i)
+
+static inline long atomic_long_read(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_read(v);
+}
+
+static inline void atomic_long_set(atomic_long_t *l, long i)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_set(v, i);
+}
+
+static inline void atomic_long_inc(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_inc(v);
+}
+
+static inline void atomic_long_dec(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_dec(v);
+}
+
+static inline void atomic_long_add(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_add(i, v);
+}
+
+static inline void atomic_long_sub(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_sub(i, v);
+}
+
+static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_sub_and_test(i, v);
+}
+
+static inline int atomic_long_dec_and_test(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_dec_and_test(v);
+}
+
+static inline int atomic_long_inc_and_test(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_inc_and_test(v);
+}
+
+static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_add_negative(i, v);
+}
+
+static inline long atomic_long_add_return(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_add_return(i, v);
+}
+
+static inline long atomic_long_sub_return(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_sub_return(i, v);
+}
+
+static inline long atomic_long_inc_return(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_inc_return(v);
+}
+
+static inline long atomic_long_dec_return(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_dec_return(v);
+}
+
+static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_add_unless(v, a, u);
+}
+
+#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
+
+#define atomic_long_cmpxchg(l, old, new) \
+	(atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
+#define atomic_long_xchg(v, new) \
+	(atomic64_xchg((atomic64_t *)(v), (new)))
+
+#else  /*  BITS_PER_LONG == 64  */
+
+typedef atomic_t atomic_long_t;
+
+#define ATOMIC_LONG_INIT(i)	ATOMIC_INIT(i)
+static inline long atomic_long_read(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_read(v);
+}
+
+static inline void atomic_long_set(atomic_long_t *l, long i)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_set(v, i);
+}
+
+static inline void atomic_long_inc(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_inc(v);
+}
+
+static inline void atomic_long_dec(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_dec(v);
+}
+
+static inline void atomic_long_add(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_add(i, v);
+}
+
+static inline void atomic_long_sub(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_sub(i, v);
+}
+
+static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_sub_and_test(i, v);
+}
+
+static inline int atomic_long_dec_and_test(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_dec_and_test(v);
+}
+
+static inline int atomic_long_inc_and_test(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_inc_and_test(v);
+}
+
+static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_add_negative(i, v);
+}
+
+static inline long atomic_long_add_return(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_add_return(i, v);
+}
+
+static inline long atomic_long_sub_return(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_sub_return(i, v);
+}
+
+static inline long atomic_long_inc_return(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_inc_return(v);
+}
+
+static inline long atomic_long_dec_return(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_dec_return(v);
+}
+
+static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_add_unless(v, a, u);
+}
+
+#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l))
+
+#define atomic_long_cmpxchg(l, old, new) \
+	(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
+#define atomic_long_xchg(v, new) \
+	(atomic_xchg((atomic_t *)(v), (new)))
+
+#endif  /*  BITS_PER_LONG == 64  */
+
+#endif  /*  _ASM_GENERIC_ATOMIC_LONG_H  */
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 81d3be459ef..c99c64dc5f3 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -1,258 +1,165 @@
-#ifndef _ASM_GENERIC_ATOMIC_H
-#define _ASM_GENERIC_ATOMIC_H
 /*
- * Copyright (C) 2005 Silicon Graphics, Inc.
- *	Christoph Lameter
+ * Generic C implementation of atomic counter operations
+ * Originally implemented for MN10300.
  *
- * Allows to provide arch independent atomic definitions without the need to
- * edit all arch specific atomic.h files.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
  */
+#ifndef __ASM_GENERIC_ATOMIC_H
+#define __ASM_GENERIC_ATOMIC_H
 
-#include <asm/types.h>
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
 
 /*
- * Suppport for atomic_long_t
- *
- * Casts for parameters are avoided for existing atomic functions in order to
- * avoid issues with cast-as-lval under gcc 4.x and other limitations that the
- * macros of a platform may have.
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
  */
 
-#if BITS_PER_LONG == 64
-
-typedef atomic64_t atomic_long_t;
-
-#define ATOMIC_LONG_INIT(i)	ATOMIC64_INIT(i)
+#define ATOMIC_INIT(i)	{ (i) }
 
-static inline long atomic_long_read(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_read(v);
-}
-
-static inline void atomic_long_set(atomic_long_t *l, long i)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_set(v, i);
-}
-
-static inline void atomic_long_inc(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_inc(v);
-}
-
-static inline void atomic_long_dec(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_dec(v);
-}
-
-static inline void atomic_long_add(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_add(i, v);
-}
-
-static inline void atomic_long_sub(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_sub(i, v);
-}
-
-static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_sub_and_test(i, v);
-}
-
-static inline int atomic_long_dec_and_test(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_dec_and_test(v);
-}
-
-static inline int atomic_long_inc_and_test(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_inc_and_test(v);
-}
-
-static inline int atomic_long_add_negative(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_add_negative(i, v);
-}
-
-static inline long atomic_long_add_return(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_add_return(i, v);
-}
-
-static inline long atomic_long_sub_return(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
+#ifdef __KERNEL__
 
-	return (long)atomic64_sub_return(i, v);
-}
-
-static inline long atomic_long_inc_return(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_inc_return(v);
-}
-
-static inline long atomic_long_dec_return(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_dec_return(v);
-}
-
-static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_add_unless(v, a, u);
-}
-
-#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
-
-#define atomic_long_cmpxchg(l, old, new) \
-	(atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
-#define atomic_long_xchg(v, new) \
-	(atomic64_xchg((atomic64_t *)(v), (new)))
-
-#else  /*  BITS_PER_LONG == 64  */
-
-typedef atomic_t atomic_long_t;
-
-#define ATOMIC_LONG_INIT(i)	ATOMIC_INIT(i)
-static inline long atomic_long_read(atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
-
-	return (long)atomic_read(v);
-}
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v)	((v)->counter)
 
-static inline void atomic_long_set(atomic_long_t *l, long i)
-{
-	atomic_t *v = (atomic_t *)l;
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
 
-	atomic_set(v, i);
-}
+#include <asm/system.h>
 
-static inline void atomic_long_inc(atomic_long_t *l)
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	atomic_inc(v);
-}
+	unsigned long flags;
+	int temp;
 
-static inline void atomic_long_dec(atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+	local_irq_save(flags);
+	temp = v->counter;
+	temp += i;
+	v->counter = temp;
+	local_irq_restore(flags);
 
-	atomic_dec(v);
+	return temp;
 }
 
-static inline void atomic_long_add(long i, atomic_long_t *l)
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	atomic_add(i, v);
-}
+	unsigned long flags;
+	int temp;
 
-static inline void atomic_long_sub(long i, atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+	local_irq_save(flags);
+	temp = v->counter;
+	temp -= i;
+	v->counter = temp;
+	local_irq_restore(flags);
 
-	atomic_sub(i, v);
+	return temp;
 }
 
-static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+static inline int atomic_add_negative(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_sub_and_test(i, v);
+	return atomic_add_return(i, v) < 0;
 }
 
-static inline int atomic_long_dec_and_test(atomic_long_t *l)
+static inline void atomic_add(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_dec_and_test(v);
+	atomic_add_return(i, v);
 }
 
-static inline int atomic_long_inc_and_test(atomic_long_t *l)
+static inline void atomic_sub(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_inc_and_test(v);
+	atomic_sub_return(i, v);
 }
 
-static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+static inline void atomic_inc(atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_add_negative(i, v);
+	atomic_add_return(1, v);
 }
 
-static inline long atomic_long_add_return(long i, atomic_long_t *l)
+static inline void atomic_dec(atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return (long)atomic_add_return(i, v);
+	atomic_sub_return(1, v);
 }
 
-static inline long atomic_long_sub_return(long i, atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
 
-	return (long)atomic_sub_return(i, v);
-}
+#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
 
-static inline long atomic_long_inc_return(atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+#define atomic_add_unless(v, a, u)				\
+({								\
+	int c, old;						\
+	c = atomic_read(v);					\
+	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
 
-	return (long)atomic_inc_return(v);
-}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-static inline long atomic_long_dec_return(atomic_long_t *l)
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 {
-	atomic_t *v = (atomic_t *)l;
+	unsigned long flags;
 
-	return (long)atomic_dec_return(v);
+	mask = ~mask;
+	local_irq_save(flags);
+	*addr &= mask;
+	local_irq_restore(flags);
 }
 
-static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
-{
-	atomic_t *v = (atomic_t *)l;
+#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
 
-	return (long)atomic_add_unless(v, a, u);
-}
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
 
-#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
 
-#define atomic_long_cmpxchg(l, old, new) \
-	(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
-#define atomic_long_xchg(v, new) \
-	(atomic_xchg((atomic_t *)(v), (new)))
+/* Assume that atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
 
-#endif  /*  BITS_PER_LONG == 64  */
+#include <asm-generic/atomic-long.h>
 
-#endif  /*  _ASM_GENERIC_ATOMIC_H  */
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_ATOMIC_H */
diff --git a/include/asm-generic/atomic64.h b/include/asm-generic/atomic64.h
new file mode 100644
index 00000000000..b18ce4f9ee3
--- /dev/null
+++ b/include/asm-generic/atomic64.h
@@ -0,0 +1,42 @@
+/*
+ * Generic implementation of 64-bit atomics using spinlocks,
+ * useful on processors that don't have 64-bit atomic instructions.
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_ATOMIC64_H
+#define _ASM_GENERIC_ATOMIC64_H
+
+typedef struct {
+	long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+extern long long atomic64_read(const atomic64_t *v);
+extern void	 atomic64_set(atomic64_t *v, long long i);
+extern void	 atomic64_add(long long a, atomic64_t *v);
+extern long long atomic64_add_return(long long a, atomic64_t *v);
+extern void	 atomic64_sub(long long a, atomic64_t *v);
+extern long long atomic64_sub_return(long long a, atomic64_t *v);
+extern long long atomic64_dec_if_positive(atomic64_t *v);
+extern long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n);
+extern long long atomic64_xchg(atomic64_t *v, long long new);
+extern int	 atomic64_add_unless(atomic64_t *v, long long a, long long u);
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v) 	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v) 	atomic64_add_unless((v), 1LL, 0LL)
+
+#endif  /*  _ASM_GENERIC_ATOMIC64_H  */
diff --git a/include/asm-generic/auxvec.h b/include/asm-generic/auxvec.h
new file mode 100644
index 00000000000..b99573b0ad1
--- /dev/null
+++ b/include/asm-generic/auxvec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_AUXVEC_H
+#define __ASM_GENERIC_AUXVEC_H
+/*
+ * Not all architectures need their own auxvec.h, the most
+ * common definitions are already in linux/auxvec.h.
+ */
+
+#endif /* __ASM_GENERIC_AUXVEC_H */
diff --git a/include/asm-generic/bitops.h b/include/asm-generic/bitops.h
index c9f369c4bd7..a54f4421a24 100644
--- a/include/asm-generic/bitops.h
+++ b/include/asm-generic/bitops.h
@@ -1,19 +1,29 @@
-#ifndef _ASM_GENERIC_BITOPS_H_
-#define _ASM_GENERIC_BITOPS_H_
+#ifndef __ASM_GENERIC_BITOPS_H
+#define __ASM_GENERIC_BITOPS_H
 
 /*
  * For the benefit of those who are trying to port Linux to another
  * architecture, here are some C-language equivalents.  You should
  * recode these in the native assembly language, if at all possible.
- * 
+ *
  * C language equivalents written by Theodore Ts'o, 9/26/92
  */
 
-#include <asm-generic/bitops/atomic.h>
-#include <asm-generic/bitops/non-atomic.h>
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+#endif
+
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/find.h>
 
@@ -26,8 +36,10 @@
 #include <asm-generic/bitops/hweight.h>
 #include <asm-generic/bitops/lock.h>
 
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
 #include <asm-generic/bitops/ext2-non-atomic.h>
 #include <asm-generic/bitops/ext2-atomic.h>
 #include <asm-generic/bitops/minix.h>
 
-#endif /* _ASM_GENERIC_BITOPS_H */
+#endif /* __ASM_GENERIC_BITOPS_H */
diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
index 4657f3e410f..c8946465e63 100644
--- a/include/asm-generic/bitops/atomic.h
+++ b/include/asm-generic/bitops/atomic.h
@@ -2,6 +2,7 @@
 #define _ASM_GENERIC_BITOPS_ATOMIC_H_
 
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_SMP
 #include <asm/spinlock.h>
diff --git a/include/asm-generic/bitsperlong.h b/include/asm-generic/bitsperlong.h
new file mode 100644
index 00000000000..4ae54e07de8
--- /dev/null
+++ b/include/asm-generic/bitsperlong.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_GENERIC_BITS_PER_LONG
+#define __ASM_GENERIC_BITS_PER_LONG
+
+/*
+ * There seems to be no way of detecting this automatically from user
+ * space, so 64 bit architectures should override this in their
+ * bitsperlong.h. In particular, an architecture that supports
+ * both 32 and 64 bit user space must not rely on CONFIG_64BIT
+ * to decide it, but rather check a compiler provided macro.
+ */
+#ifndef __BITS_PER_LONG
+#define __BITS_PER_LONG 32
+#endif
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_64BIT
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif /* CONFIG_64BIT */
+
+/*
+ * FIXME: The check currently breaks x86-64 build, so it's
+ * temporarily disabled. Please fix x86-64 and reenable
+ */
+#if 0 && BITS_PER_LONG != __BITS_PER_LONG
+#error Inconsistent word size. Check asm/bitsperlong.h
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_BITS_PER_LONG */
diff --git a/include/asm-generic/bugs.h b/include/asm-generic/bugs.h
new file mode 100644
index 00000000000..6c4f62ea714
--- /dev/null
+++ b/include/asm-generic/bugs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_GENERIC_BUGS_H
+#define __ASM_GENERIC_BUGS_H
+/*
+ * This file is included by 'init/main.c' to check for
+ * architecture-dependent bugs.
+ */
+
+static inline void check_bugs(void) { }
+
+#endif	/* __ASM_GENERIC_BUGS_H */
diff --git a/include/asm-generic/cache.h b/include/asm-generic/cache.h
new file mode 100644
index 00000000000..1bfcfe5c223
--- /dev/null
+++ b/include/asm-generic/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_CACHE_H
+#define __ASM_GENERIC_CACHE_H
+/*
+ * 32 bytes appears to be the most common cache line size,
+ * so make that the default here. Architectures with larger
+ * cache lines need to provide their own cache.h.
+ */
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif /* __ASM_GENERIC_CACHE_H */
diff --git a/include/asm-generic/cacheflush.h b/include/asm-generic/cacheflush.h
new file mode 100644
index 00000000000..ba4ec39a113
--- /dev/null
+++ b/include/asm-generic/cacheflush.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_CACHEFLUSH_H
+#define __ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * The cache doesn't need to be flushed when TLB entries change when
+ * the cache is mapped to physical memory, not virtual memory
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* __ASM_CACHEFLUSH_H */
diff --git a/include/asm-generic/checksum.h b/include/asm-generic/checksum.h
new file mode 100644
index 00000000000..4647c762d97
--- /dev/null
+++ b/include/asm-generic/checksum.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_GENERIC_CHECKSUM_H
+#define __ASM_GENERIC_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					int len, __wsum sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return (__force __sum16)~sum;
+}
+
+#ifndef csum_tcpudp_nofold
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum);
+#endif
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif /* __ASM_GENERIC_CHECKSUM_H */
diff --git a/include/asm-generic/current.h b/include/asm-generic/current.h
new file mode 100644
index 00000000000..5e86f6ae7ca
--- /dev/null
+++ b/include/asm-generic/current.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_CURRENT_H
+#define __ASM_GENERIC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#define get_current() (current_thread_info()->task)
+#define current get_current()
+
+#endif /* __ASM_GENERIC_CURRENT_H */
diff --git a/include/asm-generic/delay.h b/include/asm-generic/delay.h
new file mode 100644
index 00000000000..4586fec75dd
--- /dev/null
+++ b/include/asm-generic/delay.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_DELAY_H
+#define __ASM_GENERIC_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* __ASM_GENERIC_DELAY_H */
diff --git a/include/asm-generic/dma.h b/include/asm-generic/dma.h
new file mode 100644
index 00000000000..9dfc3a7f36d
--- /dev/null
+++ b/include/asm-generic/dma.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_GENERIC_DMA_H
+#define __ASM_GENERIC_DMA_H
+/*
+ * This file traditionally describes the i8237 PC style DMA controller.
+ * Most architectures don't have these any more and can get the minimal
+ * implementation from kernel/dma.c by not defining MAX_DMA_CHANNELS.
+ *
+ * Some code relies on seeing MAX_DMA_ADDRESS though.
+ */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+#endif /* __ASM_GENERIC_DMA_H */
diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h
index e8852c092fe..28cc03bf19e 100644
--- a/include/asm-generic/errno.h
+++ b/include/asm-generic/errno.h
@@ -106,4 +106,6 @@
 #define	EOWNERDEAD	130	/* Owner died */
 #define	ENOTRECOVERABLE	131	/* State not recoverable */
 
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+
 #endif
diff --git a/include/asm-generic/fb.h b/include/asm-generic/fb.h
new file mode 100644
index 00000000000..fe8ca7fcea0
--- /dev/null
+++ b/include/asm-generic/fb.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_FB_H_
+#define __ASM_GENERIC_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* __ASM_GENERIC_FB_H_ */
diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h
new file mode 100644
index 00000000000..67e7245dc9b
--- /dev/null
+++ b/include/asm-generic/getorder.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_GENERIC_GETORDER_H
+#define __ASM_GENERIC_GETORDER_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+
+/* Pure 2^n version of get_order */
+static inline __attribute_const__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size - 1) >> (PAGE_SHIFT - 1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_GENERIC_GETORDER_H */
diff --git a/include/asm-generic/hardirq.h b/include/asm-generic/hardirq.h
new file mode 100644
index 00000000000..3d5d2c906ab
--- /dev/null
+++ b/include/asm-generic/hardirq.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_GENERIC_HARDIRQ_H
+#define __ASM_GENERIC_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned long __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#ifndef HARDIRQ_BITS
+#define HARDIRQ_BITS	8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#ifndef ack_bad_irq
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#endif /* __ASM_GENERIC_HARDIRQ_H */
diff --git a/include/asm-generic/hw_irq.h b/include/asm-generic/hw_irq.h
new file mode 100644
index 00000000000..89036d7b40e
--- /dev/null
+++ b/include/asm-generic/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_HW_IRQ_H
+#define __ASM_GENERIC_HW_IRQ_H
+/*
+ * hw_irq.h has internal declarations for the low-level interrupt
+ * controller, like the original i8259A.
+ * In general, this is not needed for new architectures.
+ */
+
+#endif /* __ASM_GENERIC_HW_IRQ_H */
diff --git a/include/asm-generic/int-l64.h b/include/asm-generic/int-l64.h
index 2af9b75d77d..1ca3efc976c 100644
--- a/include/asm-generic/int-l64.h
+++ b/include/asm-generic/int-l64.h
@@ -8,6 +8,8 @@
 #ifndef _ASM_GENERIC_INT_L64_H
 #define _ASM_GENERIC_INT_L64_H
 
+#include <asm/bitsperlong.h>
+
 #ifndef __ASSEMBLY__
 /*
  * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
index f9bc9ac29b3..f394147c073 100644
--- a/include/asm-generic/int-ll64.h
+++ b/include/asm-generic/int-ll64.h
@@ -8,6 +8,8 @@
 #ifndef _ASM_GENERIC_INT_LL64_H
 #define _ASM_GENERIC_INT_LL64_H
 
+#include <asm/bitsperlong.h>
+
 #ifndef __ASSEMBLY__
 /*
  * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
new file mode 100644
index 00000000000..bcee6365dca
--- /dev/null
+++ b/include/asm-generic/io.h
@@ -0,0 +1,300 @@
+/* Generic I/O port emulation, based on MN10300 code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_IO_H
+#define __ASM_GENERIC_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cacheflush.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_GENERIC_IOMAP
+#include <asm-generic/iomap.h>
+#endif
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the simple architectures, we just read/write the
+ * memory location directly.
+ */
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *) addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *) addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *) addr;
+}
+
+#define readb __raw_readb
+#define readw(addr) __le16_to_cpu(__raw_readw(addr))
+#define readl(addr) __le32_to_cpu(__raw_readl(addr))
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *) addr = b;
+}
+
+static inline void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *) addr = b;
+}
+
+static inline void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *) addr = b;
+}
+
+#define writeb __raw_writeb
+#define writew(b,addr) __raw_writew(__cpu_to_le16(b),addr)
+#define writel(b,addr) __raw_writel(__cpu_to_le32(b),addr)
+
+#ifdef CONFIG_64BIT
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	return *(const volatile u64 __force *) addr;
+}
+#define readq(addr) __le64_to_cpu(__raw_readq(addr))
+
+static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
+{
+	*(volatile u64 __force *) addr = b;
+}
+#define writeq(b,addr) __raw_writeq(__cpu_to_le64(b),addr)
+#endif
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+
+static inline u8 inb(unsigned long addr)
+{
+	return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u8 *buf = buffer;
+		do {
+			u8 x = inb(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u16 *buf = buffer;
+		do {
+			u16 x = inw(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+		do {
+			u32 x = inl(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u8 *buf = buffer;
+		do {
+			outb(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u16 *buf = buffer;
+		do {
+			outw(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u32 *buf = buffer;
+		do {
+			outl(*buf++, addr);
+		} while (--count);
+	}
+}
+
+#ifndef CONFIG_GENERIC_IOMAP
+#define ioread8(addr)		readb(addr)
+#define ioread16(addr)		readw(addr)
+#define ioread32(addr)		readl(addr)
+
+#define iowrite8(v, addr)	writeb((v), (addr))
+#define iowrite16(v, addr)	writew((v), (addr))
+#define iowrite32(v, addr)	writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+	insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+	insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+	insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+	outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+	outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+	outsl((unsigned long) (p), (src), (count))
+#endif /* CONFIG_GENERIC_IOMAP */
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void __force *) (x))
+
+#ifndef CONFIG_GENERIC_IOMAP
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+#endif /* CONFIG_GENERIC_IOMAP */
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa((unsigned long)address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+{
+	return (void __iomem*) (unsigned long)offset;
+}
+
+#define __ioremap(offset, size, flags)	ioremap(offset, size)
+
+#ifndef ioremap_nocache
+#define ioremap_nocache ioremap
+#endif
+
+#ifndef ioremap_wc
+#define ioremap_wc ioremap_nocache
+#endif
+
+static inline void iounmap(void *addr)
+{
+}
+
+#ifndef CONFIG_GENERIC_IOMAP
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+#else /* CONFIG_GENERIC_IOMAP */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *p);
+#endif /* CONFIG_GENERIC_IOMAP */
+
+#define xlate_dev_kmem_ptr(p)	p
+#define xlate_dev_mem_ptr(p)	((void *) (p))
+
+#ifndef virt_to_bus
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+	return ((unsigned long) address);
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+	return (void *) address;
+}
+#endif
+
+#define memset_io(a, b, c)	memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c)	memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)	memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_GENERIC_IO_H */
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
new file mode 100644
index 00000000000..a799e20a769
--- /dev/null
+++ b/include/asm-generic/ioctls.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_GENERIC_IOCTLS_H
+#define __ASM_GENERIC_IOCTLS_H
+
+#include <linux/ioctl.h>
+
+/*
+ * These are the most common definitions for tty ioctl numbers.
+ * Most of them do not use the recommended _IOC(), but there is
+ * probably some source code out there hardcoding the number,
+ * so we might as well use them for all new platforms.
+ *
+ * The architectures that use different values here typically
+ * try to be compatible with some Unix variants for the same
+ * architecture.
+ */
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485	0x542E
+#define TIOCSRS485	0x542F
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX		0x5433
+#define TCSETXF		0x5434
+#define TCSETXW		0x5435
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+/*
+ * some architectures define FIOQSIZE as 0x545E, which is used for
+ * TIOCGHAYESESP on others
+ */
+#ifndef FIOQSIZE
+# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
+# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
+# define FIOQSIZE	0x5460
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_GENERIC_IOCTLS_H */
diff --git a/include/asm-generic/ipcbuf.h b/include/asm-generic/ipcbuf.h
new file mode 100644
index 00000000000..76982b2a1b5
--- /dev/null
+++ b/include/asm-generic/ipcbuf.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_GENERIC_IPCBUF_H
+#define __ASM_GENERIC_IPCBUF_H
+
+/*
+ * The generic ipc64_perm structure:
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * ipc64_perm was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t on architectures that only had 16 bit
+ * - 32-bit seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+				/* pad if mode_t is u16: */
+	unsigned char		__pad1[4 - sizeof(__kernel_mode_t)];
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_GENERIC_IPCBUF_H */
diff --git a/include/asm-generic/irq.h b/include/asm-generic/irq.h
new file mode 100644
index 00000000000..b90ec0bc485
--- /dev/null
+++ b/include/asm-generic/irq.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_GENERIC_IRQ_H
+#define __ASM_GENERIC_IRQ_H
+
+/*
+ * NR_IRQS is the upper bound of how many interrupts can be handled
+ * in the platform. It is used to size the static irq_map array,
+ * so don't make it too big.
+ */
+#ifndef NR_IRQS
+#define NR_IRQS 64
+#endif
+
+static inline int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#endif /* __ASM_GENERIC_IRQ_H */
diff --git a/include/asm-generic/irqflags.h b/include/asm-generic/irqflags.h
new file mode 100644
index 00000000000..9aebf618275
--- /dev/null
+++ b/include/asm-generic/irqflags.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_GENERIC_IRQFLAGS_H
+#define __ASM_GENERIC_IRQFLAGS_H
+
+/*
+ * All architectures should implement at least the first two functions,
+ * usually inline assembly will be the best way.
+ */
+#ifndef RAW_IRQ_DISABLED
+#define RAW_IRQ_DISABLED 0
+#define RAW_IRQ_ENABLED 1
+#endif
+
+/* read interrupt enabled status */
+#ifndef __raw_local_save_flags
+unsigned long __raw_local_save_flags(void);
+#endif
+
+/* set interrupt enabled status */
+#ifndef raw_local_irq_restore
+void raw_local_irq_restore(unsigned long flags);
+#endif
+
+/* get status and disable interrupts */
+#ifndef __raw_local_irq_save
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags;
+	flags = __raw_local_save_flags();
+	raw_local_irq_restore(RAW_IRQ_DISABLED);
+	return flags;
+}
+#endif
+
+/* test flags */
+#ifndef raw_irqs_disabled_flags
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return flags == RAW_IRQ_DISABLED;
+}
+#endif
+
+/* unconditionally enable interrupts */
+#ifndef raw_local_irq_enable
+static inline void raw_local_irq_enable(void)
+{
+	raw_local_irq_restore(RAW_IRQ_ENABLED);
+}
+#endif
+
+/* unconditionally disable interrupts */
+#ifndef raw_local_irq_disable
+static inline void raw_local_irq_disable(void)
+{
+	raw_local_irq_restore(RAW_IRQ_DISABLED);
+}
+#endif
+
+/* test hardware interrupt enable bit */
+#ifndef raw_irqs_disabled
+static inline int raw_irqs_disabled(void)
+{
+	return raw_irqs_disabled_flags(__raw_local_save_flags());
+}
+#endif
+
+#define raw_local_save_flags(flags) \
+	do { (flags) = __raw_local_save_flags(); } while (0)
+
+#define raw_local_irq_save(flags) \
+	do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* __ASM_GENERIC_IRQFLAGS_H */
diff --git a/include/asm-generic/kmap_types.h b/include/asm-generic/kmap_types.h
new file mode 100644
index 00000000000..58c33055c30
--- /dev/null
+++ b/include/asm-generic/kmap_types.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_GENERIC_KMAP_TYPES_H
+#define _ASM_GENERIC_KMAP_TYPES_H
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_SYNC_ICACHE,
+D(14)	KM_SYNC_DCACHE,
+D(15)	KM_UML_USERCOPY, /* UML specific, for copy_*_user - used in do_op_one_page */
+D(16)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-generic/linkage.h b/include/asm-generic/linkage.h
new file mode 100644
index 00000000000..fef7a01e541
--- /dev/null
+++ b/include/asm-generic/linkage.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_LINKAGE_H
+#define __ASM_GENERIC_LINKAGE_H
+/*
+ * linux/linkage.h provides reasonable defaults.
+ * an architecture can override them by providing its own version.
+ */
+
+#endif /* __ASM_GENERIC_LINKAGE_H */
diff --git a/include/asm-generic/mman-common.h b/include/asm-generic/mman-common.h
new file mode 100644
index 00000000000..3b69ad34189
--- /dev/null
+++ b/include/asm-generic/mman-common.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_GENERIC_MMAN_COMMON_H
+#define __ASM_GENERIC_MMAN_COMMON_H
+
+/*
+ Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
+ Based on: asm-xxx/mman.h
+*/
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* __ASM_GENERIC_MMAN_COMMON_H */
diff --git a/include/asm-generic/mman.h b/include/asm-generic/mman.h
index 5e3dde2ee5a..7cab4de2bca 100644
--- a/include/asm-generic/mman.h
+++ b/include/asm-generic/mman.h
@@ -1,41 +1,18 @@
-#ifndef _ASM_GENERIC_MMAN_H
-#define _ASM_GENERIC_MMAN_H
+#ifndef __ASM_GENERIC_MMAN_H
+#define __ASM_GENERIC_MMAN_H
 
-/*
- Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
- Based on: asm-xxx/mman.h
-*/
+#include <asm-generic/mman-common.h>
 
-#define PROT_READ	0x1		/* page can be read */
-#define PROT_WRITE	0x2		/* page can be written */
-#define PROT_EXEC	0x4		/* page can be executed */
-#define PROT_SEM	0x8		/* page may be used for atomic ops */
-#define PROT_NONE	0x0		/* page can not be accessed */
-#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
 
-#define MAP_SHARED	0x01		/* Share changes */
-#define MAP_PRIVATE	0x02		/* Changes are private */
-#define MAP_TYPE	0x0f		/* Mask for type of mapping */
-#define MAP_FIXED	0x10		/* Interpret addr exactly */
-#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
 
-#define MS_ASYNC	1		/* sync memory asynchronously */
-#define MS_INVALIDATE	2		/* invalidate the caches */
-#define MS_SYNC		4		/* synchronous memory sync */
-
-#define MADV_NORMAL	0		/* no further special treatment */
-#define MADV_RANDOM	1		/* expect random page references */
-#define MADV_SEQUENTIAL	2		/* expect sequential page references */
-#define MADV_WILLNEED	3		/* will need these pages */
-#define MADV_DONTNEED	4		/* don't need these pages */
-
-/* common parameters: try to keep these consistent across architectures */
-#define MADV_REMOVE	9		/* remove these pages & resources */
-#define MADV_DONTFORK	10		/* don't inherit across fork */
-#define MADV_DOFORK	11		/* do inherit across fork */
-
-/* compatibility flags */
-#define MAP_FILE	0
-
-#endif
+#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/include/asm-generic/mmu.h b/include/asm-generic/mmu.h
new file mode 100644
index 00000000000..4f4aa56d6b5
--- /dev/null
+++ b/include/asm-generic/mmu.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_GENERIC_MMU_H
+#define __ASM_GENERIC_MMU_H
+
+/*
+ * This is the mmu.h header for nommu implementations.
+ * Architectures with an MMU need something more complex.
+ */
+#ifndef __ASSEMBLY__
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+#endif
+
+#endif /* __ASM_GENERIC_MMU_H */
diff --git a/include/asm-generic/mmu_context.h b/include/asm-generic/mmu_context.h
new file mode 100644
index 00000000000..a7eec910ba6
--- /dev/null
+++ b/include/asm-generic/mmu_context.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_GENERIC_MMU_CONTEXT_H
+#define __ASM_GENERIC_MMU_CONTEXT_H
+
+/*
+ * Generic hooks for NOMMU architectures, which do not need to do
+ * anything special here.
+ */
+
+#include <asm-generic/mm_hooks.h>
+
+struct task_struct;
+struct mm_struct;
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+			struct task_struct *tsk)
+{
+}
+
+static inline int init_new_context(struct task_struct *tsk,
+			struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+static inline void deactivate_mm(struct task_struct *task,
+			struct mm_struct *mm)
+{
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			struct mm_struct *next,
+			struct task_struct *tsk)
+{
+}
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif /* __ASM_GENERIC_MMU_CONTEXT_H */
diff --git a/include/asm-generic/module.h b/include/asm-generic/module.h
new file mode 100644
index 00000000000..ed5b44de4c9
--- /dev/null
+++ b/include/asm-generic/module.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_GENERIC_MODULE_H
+#define __ASM_GENERIC_MODULE_H
+
+/*
+ * Many architectures just need a simple module
+ * loader without arch specific data.
+ */
+struct mod_arch_specific
+{
+};
+
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif
+
+#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/include/asm-generic/msgbuf.h b/include/asm-generic/msgbuf.h
new file mode 100644
index 00000000000..aec850d9159
--- /dev/null
+++ b/include/asm-generic/msgbuf.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_GENERIC_MSGBUF_H
+#define __ASM_GENERIC_MSGBUF_H
+
+#include <asm/bitsperlong.h>
+/*
+ * generic msqid64_ds structure.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * msqid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first three padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_GENERIC_MSGBUF_H */
diff --git a/include/asm-generic/mutex.h b/include/asm-generic/mutex.h
new file mode 100644
index 00000000000..fe91ab50279
--- /dev/null
+++ b/include/asm-generic/mutex.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_MUTEX_H
+#define __ASM_GENERIC_MUTEX_H
+/*
+ * Pull in the generic implementation for the mutex fastpath,
+ * which is a reasonable default on many architectures.
+ */
+
+#include <asm-generic/mutex-dec.h>
+#endif /* __ASM_GENERIC_MUTEX_H */
diff --git a/include/asm-generic/page.h b/include/asm-generic/page.h
index 14db733b8e6..75fec18cdc5 100644
--- a/include/asm-generic/page.h
+++ b/include/asm-generic/page.h
@@ -1,24 +1,99 @@
-#ifndef _ASM_GENERIC_PAGE_H
-#define _ASM_GENERIC_PAGE_H
+#ifndef __ASM_GENERIC_PAGE_H
+#define __ASM_GENERIC_PAGE_H
+/*
+ * Generic page.h implementation, for NOMMU architectures.
+ * This provides the dummy definitions for the memory management.
+ */
+
+#ifdef CONFIG_MMU
+#error need to prove a real asm/page.h
+#endif
+
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+	unsigned long pte;
+} pte_t;
+typedef struct {
+	unsigned long pmd[16];
+} pmd_t;
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_KERNEL_RAM_BASE_ADDRESS
+#define PAGE_OFFSET		(CONFIG_KERNEL_RAM_BASE_ADDRESS)
+#else
+#define PAGE_OFFSET		(0)
+#endif
 
 #ifndef __ASSEMBLY__
 
-#include <linux/compiler.h>
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#ifndef page_to_phys
+#define page_to_phys(page)      ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+#endif
+
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
 
-/* Pure 2^n version of get_order */
-static __inline__ __attribute_const__ int get_order(unsigned long size)
-{
-	int order;
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
 
-	size = (size - 1) >> (PAGE_SHIFT - 1);
-	order = -1;
-	do {
-		size >>= 1;
-		order++;
-	} while (size);
-	return order;
-}
+#endif /* __ASSEMBLY__ */
 
-#endif	/* __ASSEMBLY__ */
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
 
-#endif	/* _ASM_GENERIC_PAGE_H */
+#endif /* __ASM_GENERIC_PAGE_H */
diff --git a/include/asm-generic/param.h b/include/asm-generic/param.h
new file mode 100644
index 00000000000..cdf8251bfb6
--- /dev/null
+++ b/include/asm-generic/param.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_GENERIC_PARAM_H
+#define __ASM_GENERIC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* some user interfaces are */
+# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#ifndef EXEC_PAGESIZE
+#define EXEC_PAGESIZE	4096
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* __ASM_GENERIC_PARAM_H */
diff --git a/include/asm-generic/parport.h b/include/asm-generic/parport.h
new file mode 100644
index 00000000000..40528cb977e
--- /dev/null
+++ b/include/asm-generic/parport.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_GENERIC_PARPORT_H
+#define __ASM_GENERIC_PARPORT_H
+
+/*
+ * An ISA bus may have i8255 parallel ports at well-known
+ * locations in the I/O space, which are scanned by
+ * parport_pc_find_isa_ports.
+ *
+ * Without ISA support, the driver will only attach
+ * to devices on the PCI bus.
+ */
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+#ifdef CONFIG_ISA
+	return parport_pc_find_isa_ports(autoirq, autodma);
+#else
+	return 0;
+#endif
+}
+
+#endif /* __ASM_GENERIC_PARPORT_H */
diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h
index c36a77d3bf4..515c6e2e321 100644
--- a/include/asm-generic/pci.h
+++ b/include/asm-generic/pci.h
@@ -52,4 +52,12 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 #endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
 
+/*
+ * By default, assume that no iommu is in use and that the PCI
+ * space is mapped to address physical 0.
+ */
+#ifndef PCI_DMA_BUS_IS_PHYS
+#define PCI_DMA_BUS_IS_PHYS	(1)
 #endif
+
+#endif /* _ASM_GENERIC_PCI_H */
diff --git a/include/asm-generic/pgalloc.h b/include/asm-generic/pgalloc.h
new file mode 100644
index 00000000000..9e429d08b1f
--- /dev/null
+++ b/include/asm-generic/pgalloc.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_PGALLOC_H
+#define __ASM_GENERIC_PGALLOC_H
+/*
+ * an empty file is enough for a nommu architecture
+ */
+#ifdef CONFIG_MMU
+#error need to implement an architecture specific asm/pgalloc.h
+#endif
+
+#define check_pgt_cache()          do { } while (0)
+
+#endif /* __ASM_GENERIC_PGALLOC_H */
diff --git a/include/asm-generic/posix_types.h b/include/asm-generic/posix_types.h
new file mode 100644
index 00000000000..3dab00860e7
--- /dev/null
+++ b/include/asm-generic/posix_types.h
@@ -0,0 +1,165 @@
+#ifndef __ASM_GENERIC_POSIX_TYPES_H
+#define __ASM_GENERIC_POSIX_TYPES_H
+
+#include <asm/bitsperlong.h>
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.
+ *
+ * First the types that are often defined in different ways across
+ * architectures, so that you can override them.
+ */
+
+#ifndef __kernel_ino_t
+typedef unsigned long	__kernel_ino_t;
+#endif
+
+#ifndef __kernel_mode_t
+typedef unsigned int	__kernel_mode_t;
+#endif
+
+#ifndef __kernel_nlink_t
+typedef unsigned long	__kernel_nlink_t;
+#endif
+
+#ifndef __kernel_pid_t
+typedef int		__kernel_pid_t;
+#endif
+
+#ifndef __kernel_ipc_pid_t
+typedef int		__kernel_ipc_pid_t;
+#endif
+
+#ifndef __kernel_uid_t
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+#endif
+
+#ifndef __kernel_suseconds_t
+typedef long		__kernel_suseconds_t;
+#endif
+
+#ifndef __kernel_daddr_t
+typedef int		__kernel_daddr_t;
+#endif
+
+#ifndef __kernel_uid32_t
+typedef __kernel_uid_t	__kernel_uid32_t;
+typedef __kernel_gid_t	__kernel_gid32_t;
+#endif
+
+#ifndef __kernel_old_uid_t
+typedef __kernel_uid_t	__kernel_old_uid_t;
+typedef __kernel_gid_t	__kernel_old_gid_t;
+#endif
+
+#ifndef __kernel_old_dev_t
+typedef unsigned int	__kernel_old_dev_t;
+#endif
+
+/*
+ * Most 32 bit architectures use "unsigned int" size_t,
+ * and all 64 bit architectures use "unsigned long" size_t.
+ */
+#ifndef __kernel_size_t
+#if __BITS_PER_LONG != 64
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+#else
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+#endif
+#endif
+
+/*
+ * anything below here should be completely generic
+ */
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_GENERIC_POSIX_TYPES_H */
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index 763e3b060f4..fa86f240c87 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -202,7 +202,7 @@ static inline unsigned int get_rtc_ss(void)
 {
 	struct rtc_time h;
 
-	__get_rtc_time(&h);
+	get_rtc_time(&h);
 	return h.tm_sec;
 }
 
diff --git a/include/asm-generic/scatterlist.h b/include/asm-generic/scatterlist.h
new file mode 100644
index 00000000000..8b9454496a7
--- /dev/null
+++ b/include/asm-generic/scatterlist.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_GENERIC_SCATTERLIST_H
+#define __ASM_GENERIC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifndef sg_dma_len
+/*
+ * Normally, you have an iommu on 64 bit machines, but not on 32 bit
+ * machines. Architectures that are differnt should override this.
+ */
+#if __BITS_PER_LONG == 64
+#define sg_dma_len(sg)		((sg)->dma_length)
+#else
+#define sg_dma_len(sg)		((sg)->length)
+#endif /* 64 bit */
+#endif /* sg_dma_len */
+
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(~0UL)
+#endif
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/include/asm-generic/segment.h b/include/asm-generic/segment.h
new file mode 100644
index 00000000000..5580eace622
--- /dev/null
+++ b/include/asm-generic/segment.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_SEGMENT_H
+#define __ASM_GENERIC_SEGMENT_H
+/*
+ * Only here because we have some old header files that expect it...
+ *
+ * New architectures probably don't want to have their own version.
+ */
+
+#endif /* __ASM_GENERIC_SEGMENT_H */
diff --git a/include/asm-generic/sembuf.h b/include/asm-generic/sembuf.h
new file mode 100644
index 00000000000..4cb2c13e509
--- /dev/null
+++ b/include/asm-generic/sembuf.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_GENERIC_SEMBUF_H
+#define __ASM_GENERIC_SEMBUF_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * The semid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * semid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;	/* last semop time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t	sem_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused2;
+#endif
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_GENERIC_SEMBUF_H */
diff --git a/include/asm-generic/serial.h b/include/asm-generic/serial.h
new file mode 100644
index 00000000000..5e291090fe0
--- /dev/null
+++ b/include/asm-generic/serial.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_GENERIC_SERIAL_H
+#define __ASM_GENERIC_SERIAL_H
+
+/*
+ * This should not be an architecture specific #define, oh well.
+ *
+ * Traditionally, it just describes i8250 and related serial ports
+ * that have this clock rate.
+ */
+
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* __ASM_GENERIC_SERIAL_H */
diff --git a/include/asm-generic/setup.h b/include/asm-generic/setup.h
new file mode 100644
index 00000000000..6fc26a51003
--- /dev/null
+++ b/include/asm-generic/setup.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_SETUP_H
+#define __ASM_GENERIC_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif	/* __ASM_GENERIC_SETUP_H */
diff --git a/include/asm-generic/shmbuf.h b/include/asm-generic/shmbuf.h
new file mode 100644
index 00000000000..5768fa60ac8
--- /dev/null
+++ b/include/asm-generic/shmbuf.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_GENERIC_SHMBUF_H
+#define __ASM_GENERIC_SHMBUF_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * The shmid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * shmid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused3;
+#endif
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_GENERIC_SHMBUF_H */
diff --git a/include/asm-generic/shmparam.h b/include/asm-generic/shmparam.h
new file mode 100644
index 00000000000..51a3852de73
--- /dev/null
+++ b/include/asm-generic/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_SHMPARAM_H
+#define __ASM_GENERIC_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
+
+#endif /* _ASM_GENERIC_SHMPARAM_H */
diff --git a/include/asm-generic/signal-defs.h b/include/asm-generic/signal-defs.h
new file mode 100644
index 00000000000..00f95df5429
--- /dev/null
+++ b/include/asm-generic/signal-defs.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_GENERIC_SIGNAL_DEFS_H
+#define __ASM_GENERIC_SIGNAL_DEFS_H
+
+#include <linux/compiler.h>
+
+#ifndef SIG_BLOCK
+#define SIG_BLOCK          0	/* for blocking signals */
+#endif
+#ifndef SIG_UNBLOCK
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#endif
+#ifndef SIG_SETMASK
+#define SIG_SETMASK        2	/* for setting the signal mask */
+#endif
+
+#ifndef __ASSEMBLY__
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__force __sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__force __sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__force __sighandler_t)-1)	/* error return from signal */
+#endif
+
+#endif /* __ASM_GENERIC_SIGNAL_DEFS_H */
diff --git a/include/asm-generic/signal.h b/include/asm-generic/signal.h
index dae1d872007..555c0aee8a4 100644
--- a/include/asm-generic/signal.h
+++ b/include/asm-generic/signal.h
@@ -1,28 +1,131 @@
 #ifndef __ASM_GENERIC_SIGNAL_H
 #define __ASM_GENERIC_SIGNAL_H
 
-#include <linux/compiler.h>
+#include <linux/types.h>
 
-#ifndef SIG_BLOCK
-#define SIG_BLOCK          0	/* for blocking signals */
-#endif
-#ifndef SIG_UNBLOCK
-#define SIG_UNBLOCK        1	/* for unblocking signals */
-#endif
-#ifndef SIG_SETMASK
-#define SIG_SETMASK        2	/* for setting the signal mask */
+#define _NSIG		64
+#define _NSIG_BPW	__BITS_PER_LONG
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#ifndef SIGRTMAX
+#define SIGRTMAX	_NSIG
 #endif
 
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * New architectures should not define the obsolete
+ *	SA_RESTORER	0x04000000
+ */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
 #ifndef __ASSEMBLY__
-typedef void __signalfn_t(int);
-typedef __signalfn_t __user *__sighandler_t;
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+/* not actually used, but required for linux/syscalls.h */
+typedef unsigned long old_sigset_t;
 
-typedef void __restorefn_t(void);
-typedef __restorefn_t __user *__sigrestore_t;
+#include <asm-generic/signal-defs.h>
 
-#define SIG_DFL	((__force __sighandler_t)0)	/* default signal handling */
-#define SIG_IGN	((__force __sighandler_t)1)	/* ignore signal */
-#define SIG_ERR	((__force __sighandler_t)-1)	/* error return from signal */
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+#ifdef SA_RESTORER
+	__sigrestore_t sa_restorer;
 #endif
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
 
-#endif /* __ASM_GENERIC_SIGNAL_H */
+#endif /* _ASM_GENERIC_SIGNAL_H */
diff --git a/include/asm-generic/socket.h b/include/asm-generic/socket.h
new file mode 100644
index 00000000000..5d79e409241
--- /dev/null
+++ b/include/asm-generic/socket.h
@@ -0,0 +1,63 @@
+#ifndef __ASM_GENERIC_SOCKET_H
+#define __ASM_GENERIC_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+
+#ifndef SO_PASSCRED /* powerpc only differs in these */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+#endif
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
+#endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/asm-generic/sockios.h b/include/asm-generic/sockios.h
new file mode 100644
index 00000000000..9a61a369b90
--- /dev/null
+++ b/include/asm-generic/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_GENERIC_SOCKIOS_H
+#define __ASM_GENERIC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* __ASM_GENERIC_SOCKIOS_H */
diff --git a/include/asm-generic/spinlock.h b/include/asm-generic/spinlock.h
new file mode 100644
index 00000000000..1547a03ac50
--- /dev/null
+++ b/include/asm-generic/spinlock.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_GENERIC_SPINLOCK_H
+#define __ASM_GENERIC_SPINLOCK_H
+/*
+ * You need to implement asm/spinlock.h for SMP support. The generic
+ * version does not handle SMP.
+ */
+#ifdef CONFIG_SMP
+#error need an architecture specific asm/spinlock.h
+#endif
+
+#endif /* __ASM_GENERIC_SPINLOCK_H */
diff --git a/include/asm-generic/stat.h b/include/asm-generic/stat.h
new file mode 100644
index 00000000000..47e64170305
--- /dev/null
+++ b/include/asm-generic/stat.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_GENERIC_STAT_H
+#define __ASM_GENERIC_STAT_H
+
+/*
+ * Everybody gets this wrong and has to stick with it for all
+ * eternity. Hopefully, this version gets used by new architectures
+ * so they don't fall into the same traps.
+ *
+ * stat64 is copied from powerpc64, with explicit padding added.
+ * stat is the same structure layout on 64-bit, without the 'long long'
+ * types.
+ *
+ * By convention, 64 bit architectures use the stat interface, while
+ * 32 bit architectures use the stat64 interface. Note that we don't
+ * provide an __old_kernel_stat here, which new architecture should
+ * not have to start with.
+ */
+
+#include <asm/bitsperlong.h>
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long	st_dev;		/* Device.  */
+	unsigned long	st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long	st_rdev;	/* Device number, if device.  */
+	unsigned long	__pad1;
+	long		st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#if __BITS_PER_LONG != 64
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+struct stat64 {
+	unsigned long long st_dev;	/* Device.  */
+	unsigned long long st_ino;	/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned long long __pad1;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+#endif
+
+#endif /* __ASM_GENERIC_STAT_H */
diff --git a/include/asm-generic/string.h b/include/asm-generic/string.h
new file mode 100644
index 00000000000..de5e0201459
--- /dev/null
+++ b/include/asm-generic/string.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_GENERIC_STRING_H
+#define __ASM_GENERIC_STRING_H
+/*
+ * The kernel provides all required functions in lib/string.c
+ *
+ * Architectures probably want to provide at least their own optimized
+ * memcpy and memset functions though.
+ */
+
+#endif /* __ASM_GENERIC_STRING_H */
diff --git a/include/asm-generic/swab.h b/include/asm-generic/swab.h
new file mode 100644
index 00000000000..a8e9029d9eb
--- /dev/null
+++ b/include/asm-generic/swab.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_GENERIC_SWAB_H
+#define _ASM_GENERIC_SWAB_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * 32 bit architectures typically (but not always) want to
+ * set __SWAB_64_THRU_32__. In user space, this is only
+ * valid if the compiler supports 64 bit data types.
+ */
+
+#if __BITS_PER_LONG == 32
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+#endif
+
+#endif /* _ASM_GENERIC_SWAB_H */
diff --git a/include/asm-generic/syscalls.h b/include/asm-generic/syscalls.h
new file mode 100644
index 00000000000..df84e3b0455
--- /dev/null
+++ b/include/asm-generic/syscalls.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_GENERIC_SYSCALLS_H
+#define __ASM_GENERIC_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+/*
+ * Calling conventions for these system calls can differ, so
+ * it's possible to override them.
+ */
+#ifndef sys_clone
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+			void __user *parent_tid, void __user *child_tid,
+			struct pt_regs *regs);
+#endif
+
+#ifndef sys_fork
+asmlinkage long sys_fork(struct pt_regs *regs);
+#endif
+
+#ifndef sys_vfork
+asmlinkage long sys_vfork(struct pt_regs *regs);
+#endif
+
+#ifndef sys_execve
+asmlinkage long sys_execve(char __user *filename, char __user * __user *argv,
+			char __user * __user *envp, struct pt_regs *regs);
+#endif
+
+#ifndef sys_mmap2
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+#endif
+
+#ifndef sys_mmap
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, off_t pgoff);
+#endif
+
+#ifndef sys_sigaltstack
+asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
+			struct pt_regs *);
+#endif
+
+#ifndef sys_rt_sigreturn
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs);
+#endif
+
+#ifndef sys_rt_sigsuspend
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize);
+#endif
+
+#ifndef sys_rt_sigaction
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+			 struct sigaction __user *oact, size_t sigsetsize);
+#endif
+
+#endif /* __ASM_GENERIC_SYSCALLS_H */
diff --git a/include/asm-generic/system.h b/include/asm-generic/system.h
new file mode 100644
index 00000000000..efa403b5e12
--- /dev/null
+++ b/include/asm-generic/system.h
@@ -0,0 +1,161 @@
+/* Generic system definitions, based on MN10300 definitions.
+ *
+ * It should be possible to use these on really simple architectures,
+ * but it serves more as a starting point for new ports.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_SYSTEM_H
+#define __ASM_GENERIC_SYSTEM_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+#include <asm/cmpxchg-local.h>
+
+struct task_struct;
+
+/* context switching is now performed out-of-line in switch_to.S */
+extern struct task_struct *__switch_to(struct task_struct *,
+		struct task_struct *);
+#define switch_to(prev, next, last)					\
+	do {								\
+		((last) = __switch_to((prev), (next)));			\
+	} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * This implementation only contains a compiler barrier.
+ */
+
+#define mb()	asm volatile ("": : :"memory")
+#define rmb()	mb()
+#define wmb()	asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#endif
+
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends()		do {} while (0)
+#define smp_read_barrier_depends()	do {} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+/* This function doesn't exist, so you'll get a linker error
+ *    if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline
+unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	unsigned long ret, flags;
+
+	switch (size) {
+	case 1:
+#ifdef __xchg_u8
+		return __xchg_u8(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u8 *)ptr;
+		*(volatile u8 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u8 */
+
+	case 2:
+#ifdef __xchg_u16
+		return __xchg_u16(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u16 *)ptr;
+		*(volatile u16 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u16 */
+
+	case 4:
+#ifdef __xchg_u32
+		return __xchg_u32(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u32 *)ptr;
+		*(volatile u32 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u32 */
+
+#ifdef CONFIG_64BIT
+	case 8:
+#ifdef __xchg_u64
+		return __xchg_u64(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u64 *)ptr;
+		*(volatile u64 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u64 */
+#endif /* CONFIG_64BIT */
+
+	default:
+		__xchg_called_with_bad_pointer();
+		return x;
+	}
+}
+
+#define xchg(ptr, x) \
+	((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+				      unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define cmpxchg(ptr, o, n)					\
+	((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+					(unsigned long)(o),	\
+					(unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_SYSTEM_H */
diff --git a/include/asm-generic/termbits.h b/include/asm-generic/termbits.h
new file mode 100644
index 00000000000..1c9773d48cb
--- /dev/null
+++ b/include/asm-generic/termbits.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_GENERIC_TERMBITS_H
+#define __ASM_GENERIC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_GENERIC_TERMBITS_H */
diff --git a/include/asm-generic/termios-base.h b/include/asm-generic/termios-base.h
new file mode 100644
index 00000000000..0a769feb22b
--- /dev/null
+++ b/include/asm-generic/termios-base.h
@@ -0,0 +1,77 @@
+/* termios.h: generic termios/termio user copying/translation
+ */
+
+#ifndef _ASM_GENERIC_TERMIOS_BASE_H
+#define _ASM_GENERIC_TERMIOS_BASE_H
+
+#include <asm/uaccess.h>
+
+#ifndef __ARCH_TERMIO_GETPUT
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
+}
+
+#ifndef user_termios_to_kernel_termios
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#endif
+
+#ifndef kernel_termios_to_user_termios
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#endif
+
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __ARCH_TERMIO_GETPUT */
+
+#endif /* _ASM_GENERIC_TERMIOS_BASE_H */
diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h
index 7d39ecc92d9..d0922adc56d 100644
--- a/include/asm-generic/termios.h
+++ b/include/asm-generic/termios.h
@@ -1,18 +1,68 @@
-/* termios.h: generic termios/termio user copying/translation
- */
-
 #ifndef _ASM_GENERIC_TERMIOS_H
 #define _ASM_GENERIC_TERMIOS_H
+/*
+ * Most architectures have straight copies of the x86 code, with
+ * varying levels of bug fixes on top. Usually it's a good idea
+ * to use this generic version instead, but be careful to avoid
+ * ABI changes.
+ * New architectures should not provide their own version.
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
 
 #include <asm/uaccess.h>
 
-#ifndef __ARCH_TERMIO_GETPUT
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
 
 /*
  * Translate a "termio" structure into a "termios". Ugh.
  */
 static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						struct termio __user *termio)
+						const struct termio __user *termio)
 {
 	unsigned short tmp;
 
@@ -61,17 +111,44 @@ static inline int kernel_termios_to_user_termio(struct termio __user *termio,
 	return 0;
 }
 
-#ifndef user_termios_to_kernel_termios
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#endif
+#ifdef TCGETS2
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios2 __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios2));
+}
 
-#ifndef kernel_termios_to_user_termios
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
-#endif
+static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios2));
+}
 
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+						   struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+						   struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#else /* TCGETS2 */
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#endif /* TCGETS2 */
 
-#endif	/* __ARCH_TERMIO_GETPUT */
+#endif	/* __KERNEL__ */
 
 #endif /* _ASM_GENERIC_TERMIOS_H */
diff --git a/include/asm-generic/timex.h b/include/asm-generic/timex.h
new file mode 100644
index 00000000000..b2243cb8d6f
--- /dev/null
+++ b/include/asm-generic/timex.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_GENERIC_TIMEX_H
+#define __ASM_GENERIC_TIMEX_H
+
+/*
+ * If you have a cycle counter, return the value here.
+ */
+typedef unsigned long cycles_t;
+#ifndef get_cycles
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Architectures are encouraged to implement read_current_timer
+ * and define this in order to avoid the expensive delay loop
+ * calibration during boot.
+ */
+#undef ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* __ASM_GENERIC_TIMEX_H */
diff --git a/include/asm-generic/tlbflush.h b/include/asm-generic/tlbflush.h
new file mode 100644
index 00000000000..c7af037024c
--- /dev/null
+++ b/include/asm-generic/tlbflush.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_GENERIC_TLBFLUSH_H
+#define __ASM_GENERIC_TLBFLUSH_H
+/*
+ * This is a dummy tlbflush implementation that can be used on all
+ * nommu architectures.
+ * If you have an MMU, you need to write your own functions.
+ */
+#ifdef CONFIG_MMU
+#error need to implement an architecture specific asm/tlbflush.h
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+
+#endif /* __ASM_GENERIC_TLBFLUSH_H */
diff --git a/include/asm-generic/types.h b/include/asm-generic/types.h
new file mode 100644
index 00000000000..fba7d33ca3f
--- /dev/null
+++ b/include/asm-generic/types.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_GENERIC_TYPES_H
+#define _ASM_GENERIC_TYPES_H
+/*
+ * int-ll64 is used practically everywhere now,
+ * so use it as a reasonable default.
+ */
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+/*
+ * DMA addresses may be very different from physical addresses
+ * and pointers. i386 and powerpc may have 64 bit DMA on 32 bit
+ * systems, while sparc64 uses 32 bit DMA addresses for 64 bit
+ * physical addresses.
+ * This default defines dma_addr_t to have the same size as
+ * phys_addr_t, which is the most common way.
+ * Do not define the dma64_addr_t type, which never really
+ * worked.
+ */
+#ifndef dma_addr_t
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif /* CONFIG_PHYS_ADDR_T_64BIT */
+#endif /* dma_addr_t */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/include/asm-generic/uaccess-unaligned.h b/include/asm-generic/uaccess-unaligned.h
new file mode 100644
index 00000000000..67deb898f0c
--- /dev/null
+++ b/include/asm-generic/uaccess-unaligned.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_GENERIC_UACCESS_UNALIGNED_H
+#define __ASM_GENERIC_UACCESS_UNALIGNED_H
+
+/*
+ * This macro should be used instead of __get_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __get_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x;					\
+	__copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0;	\
+	(x) = __x;							\
+})
+
+
+/*
+ * This macro should be used instead of __put_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __put_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x = (x);					\
+	__copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0;	\
+})
+
+#endif /* __ASM_GENERIC_UACCESS_UNALIGNED_H */
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 549cb3a1640..6d8cab22e29 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -1,26 +1,325 @@
-#ifndef _ASM_GENERIC_UACCESS_H_
-#define _ASM_GENERIC_UACCESS_H_
+#ifndef __ASM_GENERIC_UACCESS_H
+#define __ASM_GENERIC_UACCESS_H
 
 /*
- * This macro should be used instead of __get_user() when accessing
- * values at locations that are not known to be aligned.
+ * User space memory access functions, these should work
+ * on a ny machine that has kernel and user data in the same
+ * address space, e.g. all NOMMU machines.
  */
-#define __get_user_unaligned(x, ptr)					\
-({									\
-	__typeof__ (*(ptr)) __x;					\
-	__copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0;	\
-	(x) = __x;							\
-})
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#ifndef KERNEL_DS
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#endif
+
+#ifndef USER_DS
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#ifndef get_fs
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+}
+#endif
 
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type, addr, size) __access_ok((unsigned long)(addr),(size))
+
+/*
+ * The architecture should really override this if possible, at least
+ * doing a check on the get_fs()
+ */
+#ifndef __access_ok
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	return 1;
+}
+#endif
 
 /*
- * This macro should be used instead of __put_user() when accessing
- * values at locations that are not known to be aligned.
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
  */
-#define __put_user_unaligned(x, ptr)					\
-({									\
-	__typeof__ (*(ptr)) __x = (x);					\
-	__copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0;	\
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * architectures with an MMU should override these two
+ */
+#ifndef __copy_from_user
+static inline __must_check long __copy_from_user(void *to,
+		const void __user * from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		switch(n) {
+		case 1:
+			*(u8 *)to = *(u8 __force *)from;
+			return 0;
+		case 2:
+			*(u16 *)to = *(u16 __force *)from;
+			return 0;
+		case 4:
+			*(u32 *)to = *(u32 __force *)from;
+			return 0;
+#ifdef CONFIG_64BIT
+		case 8:
+			*(u64 *)to = *(u64 __force *)from;
+			return 0;
+#endif
+		default:
+			break;
+		}
+	}
+
+	memcpy(to, (const void __force *)from, n);
+	return 0;
+}
+#endif
+
+#ifndef __copy_to_user
+static inline __must_check long __copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		switch(n) {
+		case 1:
+			*(u8 __force *)to = *(u8 *)from;
+			return 0;
+		case 2:
+			*(u16 __force *)to = *(u16 *)from;
+			return 0;
+		case 4:
+			*(u32 __force *)to = *(u32 *)from;
+			return 0;
+#ifdef CONFIG_64BIT
+		case 8:
+			*(u64 __force *)to = *(u64 *)from;
+			return 0;
+#endif
+		default:
+			break;
+		}
+	}
+
+	memcpy((void __force *)to, from, n);
+	return 0;
+}
+#endif
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ * This version just falls back to copy_{from,to}_user, which should
+ * provide a fast-path for small values.
+ */
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err = -EFAULT;					\
+        __chk_user_ptr(ptr);                                    \
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__access_ok(ptr, sizeof (*ptr)) ?			\
+		__put_user(x, ptr) :				\
+		-EFAULT;					\
 })
 
-#endif /* _ASM_GENERIC_UACCESS_H */
+static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
+{
+	size = __copy_to_user(ptr, x, size);
+	return size ? -EFAULT : size;
+}
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#define __get_user(x, ptr)					\
+({								\
+	int __gu_err = -EFAULT;					\
+	__chk_user_ptr(ptr);					\
+	switch (sizeof(*(ptr))) {				\
+	case 1: {						\
+		unsigned char __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 2: {						\
+		unsigned short __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 4: {						\
+		unsigned int __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 8: {						\
+		unsigned long long __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	__gu_err;						\
+})
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__access_ok(ptr, sizeof (*ptr)) ?			\
+		__get_user(x, ptr) :				\
+		-EFAULT;					\
+})
+
+static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
+{
+	size = __copy_from_user(x, ptr, size);
+	return size ? -EFAULT : size;
+}
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#ifndef __copy_from_user_inatomic
+#define __copy_from_user_inatomic __copy_from_user
+#endif
+
+#ifndef __copy_to_user_inatomic
+#define __copy_to_user_inatomic __copy_to_user
+#endif
+
+static inline long copy_from_user(void *to,
+		const void __user * from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(from, n))
+		return __copy_from_user(to, from, n);
+	else
+		return n;
+}
+
+static inline long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(to, n))
+		return __copy_to_user(to, from, n);
+	else
+		return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#ifndef __strncpy_from_user
+static inline long
+__strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	char *tmp;
+	strncpy(dst, (const char __force *)src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return (tmp - dst);
+}
+#endif
+
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!__access_ok(src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+#ifndef strnlen_user
+static inline long strnlen_user(const char __user *src, long n)
+{
+	return strlen((void * __force)src) + 1;
+}
+#endif
+
+static inline long strlen_user(const char __user *src)
+{
+	return strnlen_user(src, 32767);
+}
+
+/*
+ * Zero Userspace
+ */
+#ifndef __clear_user
+static inline __must_check unsigned long
+__clear_user(void __user *to, unsigned long n)
+{
+	memset((void __force *)to, 0, n);
+	return 0;
+}
+#endif
+
+static inline __must_check unsigned long
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (!__access_ok(to, n))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+#endif /* __ASM_GENERIC_UACCESS_H */
diff --git a/include/asm-generic/ucontext.h b/include/asm-generic/ucontext.h
new file mode 100644
index 00000000000..ad77343e8a9
--- /dev/null
+++ b/include/asm-generic/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_UCONTEXT_H
+#define __ASM_GENERIC_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/include/asm-generic/unaligned.h b/include/asm-generic/unaligned.h
new file mode 100644
index 00000000000..03cf5936bad
--- /dev/null
+++ b/include/asm-generic/unaligned.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_GENERIC_UNALIGNED_H
+#define __ASM_GENERIC_UNALIGNED_H
+
+/*
+ * This is the most generic implementation of unaligned accesses
+ * and should work almost anywhere.
+ *
+ * If an architecture can handle unaligned accesses in hardware,
+ * it may want to use the linux/unaligned/access_ok.h implementation
+ * instead.
+ */
+#include <asm/byteorder.h>
+
+#if defined(__LITTLE_ENDIAN)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#elif defined(__BIG_ENDIAN)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#else
+# error need to define endianess
+#endif
+
+#endif /* __ASM_GENERIC_UNALIGNED_H */
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
new file mode 100644
index 00000000000..5b34b6233d6
--- /dev/null
+++ b/include/asm-generic/unistd.h
@@ -0,0 +1,854 @@
+#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_GENERIC_UNISTD_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * This file contains the system call numbers, based on the
+ * layout of the x86-64 architecture, which embeds the
+ * pointer to the syscall in the table.
+ *
+ * As a basic principle, no duplication of functionality
+ * should be added, e.g. we don't use lseek when llseek
+ * is present. New architectures should use this file
+ * and implement the less feature-full calls in user space.
+ */
+
+#ifndef __SYSCALL
+#define __SYSCALL(x, y)
+#endif
+
+#if __BITS_PER_LONG == 32
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _32)
+#else
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _64)
+#endif
+
+#define __NR_io_setup 0
+__SYSCALL(__NR_io_setup, sys_io_setup)
+#define __NR_io_destroy 1
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_submit 2
+__SYSCALL(__NR_io_submit, sys_io_submit)
+#define __NR_io_cancel 3
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_io_getevents 4
+__SYSCALL(__NR_io_getevents, sys_io_getevents)
+
+/* fs/xattr.c */
+#define __NR_setxattr 5
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr 6
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr 7
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr 8
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr 9
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr 10
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr 11
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr 12
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr 13
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr 14
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr 15
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr 16
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+
+/* fs/dcache.c */
+#define __NR_getcwd 17
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+/* fs/cookies.c */
+#define __NR_lookup_dcookie 18
+__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
+
+/* fs/eventfd.c */
+#define __NR_eventfd2 19
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+
+/* fs/eventpoll.c */
+#define __NR_epoll_create1 20
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_epoll_ctl 21
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_epoll_pwait 22
+__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
+
+/* fs/fcntl.c */
+#define __NR_dup 23
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup3 24
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR3264_fcntl 25
+__SC_3264(__NR3264_fcntl, sys_fcntl64, sys_fcntl)
+
+/* fs/inotify_user.c */
+#define __NR_inotify_init1 26
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+#define __NR_inotify_add_watch 27
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch 28
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+
+/* fs/ioctl.c */
+#define __NR_ioctl 29
+__SYSCALL(__NR_ioctl, sys_ioctl)
+
+/* fs/ioprio.c */
+#define __NR_ioprio_set 30
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 31
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+
+/* fs/locks.c */
+#define __NR_flock 32
+__SYSCALL(__NR_flock, sys_flock)
+
+/* fs/namei.c */
+#define __NR_mknodat 33
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_mkdirat 34
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_unlinkat 35
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_symlinkat 36
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_linkat 37
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_renameat 38
+__SYSCALL(__NR_renameat, sys_renameat)
+
+/* fs/namespace.c */
+#define __NR_umount2 39
+__SYSCALL(__NR_umount2, sys_umount)
+#define __NR_mount 40
+__SYSCALL(__NR_mount, sys_mount)
+#define __NR_pivot_root 41
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+/* fs/nfsctl.c */
+#define __NR_nfsservctl 42
+__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+
+/* fs/open.c */
+#define __NR3264_statfs 43
+__SC_3264(__NR3264_statfs, sys_statfs64, sys_statfs)
+#define __NR3264_fstatfs 44
+__SC_3264(__NR3264_fstatfs, sys_fstatfs64, sys_fstatfs)
+#define __NR3264_truncate 45
+__SC_3264(__NR3264_truncate, sys_truncate64, sys_truncate)
+#define __NR3264_ftruncate 46
+__SC_3264(__NR3264_ftruncate, sys_ftruncate64, sys_ftruncate)
+
+#define __NR_fallocate 47
+__SYSCALL(__NR_fallocate, sys_fallocate)
+#define __NR_faccessat 48
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_chdir 49
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir 50
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_chroot 51
+__SYSCALL(__NR_chroot, sys_chroot)
+#define __NR_fchmod 52
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_fchmodat 53
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_fchownat 54
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_fchown 55
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_openat 56
+__SYSCALL(__NR_openat, sys_openat)
+#define __NR_close 57
+__SYSCALL(__NR_close, sys_close)
+#define __NR_vhangup 58
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+/* fs/pipe.c */
+#define __NR_pipe2 59
+__SYSCALL(__NR_pipe2, sys_pipe2)
+
+/* fs/quota.c */
+#define __NR_quotactl 60
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+/* fs/readdir.c */
+#define __NR_getdents64 61
+__SYSCALL(__NR_getdents64, sys_getdents64)
+
+/* fs/read_write.c */
+#define __NR3264_lseek 62
+__SC_3264(__NR3264_lseek, sys_llseek, sys_lseek)
+#define __NR_read 63
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write 64
+__SYSCALL(__NR_write, sys_write)
+#define __NR_readv 65
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev 66
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_pread64 67
+__SYSCALL(__NR_pread64, sys_pread64)
+#define __NR_pwrite64 68
+__SYSCALL(__NR_pwrite64, sys_pwrite64)
+#define __NR_preadv 69
+__SYSCALL(__NR_preadv, sys_preadv)
+#define __NR_pwritev 70
+__SYSCALL(__NR_pwritev, sys_pwritev)
+
+/* fs/sendfile.c */
+#define __NR3264_sendfile 71
+__SC_3264(__NR3264_sendfile, sys_sendfile64, sys_sendfile)
+
+/* fs/select.c */
+#define __NR_pselect6 72
+__SYSCALL(__NR_pselect6, sys_pselect6)
+#define __NR_ppoll 73
+__SYSCALL(__NR_ppoll, sys_ppoll)
+
+/* fs/signalfd.c */
+#define __NR_signalfd4 74
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
+
+/* fs/splice.c */
+#define __NR_vmsplice 75
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+#define __NR_splice 76
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_tee 77
+__SYSCALL(__NR_tee, sys_tee)
+
+/* fs/stat.c */
+#define __NR_readlinkat 78
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR3264_fstatat 79
+__SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat)
+#define __NR3264_fstat 80
+__SC_3264(__NR3264_fstat, sys_fstat64, sys_newfstat)
+
+/* fs/sync.c */
+#define __NR_sync 81
+__SYSCALL(__NR_sync, sys_sync)
+#define __NR_fsync 82
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync 83
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#define __NR_sync_file_range 84
+__SYSCALL(__NR_sync_file_range, sys_sync_file_range) /* .long sys_sync_file_range2, */
+
+/* fs/timerfd.c */
+#define __NR_timerfd_create 85
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_timerfd_settime 86
+__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
+#define __NR_timerfd_gettime 87
+__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+
+/* fs/utimes.c */
+#define __NR_utimensat 88
+__SYSCALL(__NR_utimensat, sys_utimensat)
+
+/* kernel/acct.c */
+#define __NR_acct 89
+__SYSCALL(__NR_acct, sys_acct)
+
+/* kernel/capability.c */
+#define __NR_capget 90
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset 91
+__SYSCALL(__NR_capset, sys_capset)
+
+/* kernel/exec_domain.c */
+#define __NR_personality 92
+__SYSCALL(__NR_personality, sys_personality)
+
+/* kernel/exit.c */
+#define __NR_exit 93
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_exit_group 94
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_waitid 95
+__SYSCALL(__NR_waitid, sys_waitid)
+
+/* kernel/fork.c */
+#define __NR_set_tid_address 96
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_unshare 97
+__SYSCALL(__NR_unshare, sys_unshare)
+
+/* kernel/futex.c */
+#define __NR_futex 98
+__SYSCALL(__NR_futex, sys_futex)
+#define __NR_set_robust_list 99
+__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
+#define __NR_get_robust_list 100
+__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
+
+/* kernel/hrtimer.c */
+#define __NR_nanosleep 101
+__SYSCALL(__NR_nanosleep, sys_nanosleep)
+
+/* kernel/itimer.c */
+#define __NR_getitimer 102
+__SYSCALL(__NR_getitimer, sys_getitimer)
+#define __NR_setitimer 103
+__SYSCALL(__NR_setitimer, sys_setitimer)
+
+/* kernel/kexec.c */
+#define __NR_kexec_load 104
+__SYSCALL(__NR_kexec_load, sys_kexec_load)
+
+/* kernel/module.c */
+#define __NR_init_module 105
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module 106
+__SYSCALL(__NR_delete_module, sys_delete_module)
+
+/* kernel/posix-timers.c */
+#define __NR_timer_create 107
+__SYSCALL(__NR_timer_create, sys_timer_create)
+#define __NR_timer_gettime 108
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
+#define __NR_timer_getoverrun 109
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_settime 110
+__SYSCALL(__NR_timer_settime, sys_timer_settime)
+#define __NR_timer_delete 111
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime 112
+__SYSCALL(__NR_clock_settime, sys_clock_settime)
+#define __NR_clock_gettime 113
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
+#define __NR_clock_getres 114
+__SYSCALL(__NR_clock_getres, sys_clock_getres)
+#define __NR_clock_nanosleep 115
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
+
+/* kernel/printk.c */
+#define __NR_syslog 116
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* kernel/ptrace.c */
+#define __NR_ptrace 117
+__SYSCALL(__NR_ptrace, sys_ptrace)
+
+/* kernel/sched.c */
+#define __NR_sched_setparam 118
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_setscheduler 119
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler 120
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_getparam 121
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setaffinity 122
+__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
+#define __NR_sched_getaffinity 123
+__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
+#define __NR_sched_yield 124
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_sched_get_priority_max 125
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min 126
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval 127
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
+
+/* kernel/signal.c */
+#define __NR_restart_syscall 128
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_kill 129
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_tkill 130
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_tgkill 131
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_sigaltstack 132
+__SYSCALL(__NR_sigaltstack, sys_sigaltstack)
+#define __NR_rt_sigsuspend 133
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend) /* __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __NR_rt_sigaction 134
+__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction) /* __ARCH_WANT_SYS_RT_SIGACTION */
+#define __NR_rt_sigprocmask 135
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigpending 136
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait 137
+__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo 138
+__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
+#define __NR_rt_sigreturn 139
+__SYSCALL(__NR_rt_sigreturn, sys_rt_sigreturn) /* sys_rt_sigreturn_wrapper, */
+
+/* kernel/sys.c */
+#define __NR_setpriority 140
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_getpriority 141
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_reboot 142
+__SYSCALL(__NR_reboot, sys_reboot)
+#define __NR_setregid 143
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_setgid 144
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_setreuid 145
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setuid 146
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setresuid 147
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid 148
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid 149
+__SYSCALL(__NR_setresgid, sys_setresgid)
+#define __NR_getresgid 150
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_setfsuid 151
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid 152
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_times 153
+__SYSCALL(__NR_times, sys_times)
+#define __NR_setpgid 154
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getpgid 155
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_getsid 156
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_setsid 157
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_getgroups 158
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups 159
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_uname 160
+__SYSCALL(__NR_uname, sys_newuname)
+#define __NR_sethostname 161
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname 162
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+#define __NR_getrlimit 163
+__SYSCALL(__NR_getrlimit, sys_getrlimit)
+#define __NR_setrlimit 164
+__SYSCALL(__NR_setrlimit, sys_setrlimit)
+#define __NR_getrusage 165
+__SYSCALL(__NR_getrusage, sys_getrusage)
+#define __NR_umask 166
+__SYSCALL(__NR_umask, sys_umask)
+#define __NR_prctl 167
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_getcpu 168
+__SYSCALL(__NR_getcpu, sys_getcpu)
+
+/* kernel/time.c */
+#define __NR_gettimeofday 169
+__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
+#define __NR_settimeofday 170
+__SYSCALL(__NR_settimeofday, sys_settimeofday)
+#define __NR_adjtimex 171
+__SYSCALL(__NR_adjtimex, sys_adjtimex)
+
+/* kernel/timer.c */
+#define __NR_getpid 172
+__SYSCALL(__NR_getpid, sys_getpid)
+#define __NR_getppid 173
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getuid 174
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_geteuid 175
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getgid 176
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_getegid 177
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_gettid 178
+__SYSCALL(__NR_gettid, sys_gettid)
+#define __NR_sysinfo 179
+__SYSCALL(__NR_sysinfo, sys_sysinfo)
+
+/* ipc/mqueue.c */
+#define __NR_mq_open 180
+__SYSCALL(__NR_mq_open, sys_mq_open)
+#define __NR_mq_unlink 181
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend 182
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
+#define __NR_mq_timedreceive 183
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
+#define __NR_mq_notify 184
+__SYSCALL(__NR_mq_notify, sys_mq_notify)
+#define __NR_mq_getsetattr 185
+__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
+
+/* ipc/msg.c */
+#define __NR_msgget 186
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgctl 187
+__SYSCALL(__NR_msgctl, sys_msgctl)
+#define __NR_msgrcv 188
+__SYSCALL(__NR_msgrcv, sys_msgrcv)
+#define __NR_msgsnd 189
+__SYSCALL(__NR_msgsnd, sys_msgsnd)
+
+/* ipc/sem.c */
+#define __NR_semget 190
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semctl 191
+__SYSCALL(__NR_semctl, sys_semctl)
+#define __NR_semtimedop 192
+__SYSCALL(__NR_semtimedop, sys_semtimedop)
+#define __NR_semop 193
+__SYSCALL(__NR_semop, sys_semop)
+
+/* ipc/shm.c */
+#define __NR_shmget 194
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmctl 195
+__SYSCALL(__NR_shmctl, sys_shmctl)
+#define __NR_shmat 196
+__SYSCALL(__NR_shmat, sys_shmat)
+#define __NR_shmdt 197
+__SYSCALL(__NR_shmdt, sys_shmdt)
+
+/* net/socket.c */
+#define __NR_socket 198
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_socketpair 199
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_bind 200
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen 201
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_accept 202
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_connect 203
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_getsockname 204
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername 205
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_sendto 206
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom 207
+__SYSCALL(__NR_recvfrom, sys_recvfrom)
+#define __NR_setsockopt 208
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt 209
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+#define __NR_shutdown 210
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_sendmsg 211
+__SYSCALL(__NR_sendmsg, sys_sendmsg)
+#define __NR_recvmsg 212
+__SYSCALL(__NR_recvmsg, sys_recvmsg)
+
+/* mm/filemap.c */
+#define __NR_readahead 213
+__SYSCALL(__NR_readahead, sys_readahead)
+
+/* mm/nommu.c, also with MMU */
+#define __NR_brk 214
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_munmap 215
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_mremap 216
+__SYSCALL(__NR_mremap, sys_mremap)
+
+/* security/keys/keyctl.c */
+#define __NR_add_key 217
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key 218
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl 219
+__SYSCALL(__NR_keyctl, sys_keyctl)
+
+/* arch/example/kernel/sys_example.c */
+#define __NR_clone 220
+__SYSCALL(__NR_clone, sys_clone)	/* .long sys_clone_wrapper */
+#define __NR_execve 221
+__SYSCALL(__NR_execve, sys_execve)	/* .long sys_execve_wrapper */
+
+#define __NR3264_mmap 222
+__SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap)
+/* mm/fadvise.c */
+#define __NR3264_fadvise64 223
+__SC_3264(__NR3264_fadvise64, sys_fadvise64_64, sys_fadvise64)
+
+/* mm/, CONFIG_MMU only */
+#ifndef __ARCH_NOMMU
+#define __NR_swapon 224
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff 225
+__SYSCALL(__NR_swapoff, sys_swapoff)
+#define __NR_mprotect 226
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_msync 227
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mlock 228
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock 229
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall 230
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall 231
+__SYSCALL(__NR_munlockall, sys_munlockall)
+#define __NR_mincore 232
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise 233
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_remap_file_pages 234
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_mbind 235
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_get_mempolicy 236
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_set_mempolicy 237
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_migrate_pages 238
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
+#define __NR_move_pages 239
+__SYSCALL(__NR_move_pages, sys_move_pages)
+#endif
+
+#undef __NR_syscalls
+#define __NR_syscalls 240
+
+/*
+ * All syscalls below here should go away really,
+ * these are provided for both review and as a porting
+ * help for the C library version.
+*
+ * Last chance: are any of these important enought to
+ * enable by default?
+ */
+#ifdef __ARCH_WANT_SYSCALL_NO_AT
+#define __NR_open 1024
+__SYSCALL(__NR_open, sys_open)
+#define __NR_link 1025
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink 1026
+__SYSCALL(__NR_unlink, sys_unlink)
+#define __NR_mknod 1027
+__SYSCALL(__NR_mknod, sys_mknod)
+#define __NR_chmod 1028
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_chown 1029
+__SYSCALL(__NR_chown, sys_chown)
+#define __NR_mkdir 1030
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir 1031
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_lchown 1032
+__SYSCALL(__NR_lchown, sys_lchown)
+#define __NR_access 1033
+__SYSCALL(__NR_access, sys_access)
+#define __NR_rename 1034
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_readlink 1035
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_symlink 1036
+__SYSCALL(__NR_symlink, sys_symlink)
+#define __NR_utimes 1037
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR3264_stat 1038
+__SC_3264(__NR3264_stat, sys_stat64, sys_newstat)
+#define __NR3264_lstat 1039
+__SC_3264(__NR3264_lstat, sys_lstat64, sys_newlstat)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR3264_lstat+1)
+#endif /* __ARCH_WANT_SYSCALL_NO_AT */
+
+#ifdef __ARCH_WANT_SYSCALL_NO_FLAGS
+#define __NR_pipe 1040
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_dup2 1041
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_epoll_create 1042
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_inotify_init 1043
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_eventfd 1044
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_signalfd 1045
+__SYSCALL(__NR_signalfd, sys_signalfd)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_signalfd+1)
+#endif /* __ARCH_WANT_SYSCALL_NO_FLAGS */
+
+#if __BITS_PER_LONG == 32 && defined(__ARCH_WANT_SYSCALL_OFF_T)
+#define __NR_sendfile 1046
+__SYSCALL(__NR_sendfile, sys_sendfile)
+#define __NR_ftruncate 1047
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_truncate 1048
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_stat 1049
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_lstat 1050
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_fstat 1051
+__SYSCALL(__NR_fstat, sys_newfstat)
+#define __NR_fcntl 1052
+__SYSCALL(__NR_fcntl, sys_fcntl)
+#define __NR_fadvise64 1053
+#define __ARCH_WANT_SYS_FADVISE64
+__SYSCALL(__NR_fadvise64, sys_fadvise64)
+#define __NR_newfstatat 1054
+#define __ARCH_WANT_SYS_NEWFSTATAT
+__SYSCALL(__NR_newfstatat, sys_newfstatat)
+#define __NR_fstatfs 1055
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+#define __NR_statfs 1056
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_lseek 1057
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_mmap 1058
+__SYSCALL(__NR_mmap, sys_mmap)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_mmap+1)
+#endif /* 32 bit off_t syscalls */
+
+#ifdef __ARCH_WANT_SYSCALL_DEPRECATED
+#define __NR_alarm 1059
+#define __ARCH_WANT_SYS_ALARM
+__SYSCALL(__NR_alarm, sys_alarm)
+#define __NR_getpgrp 1060
+#define __ARCH_WANT_SYS_GETPGRP
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+#define __NR_pause 1061
+#define __ARCH_WANT_SYS_PAUSE
+__SYSCALL(__NR_pause, sys_pause)
+#define __NR_time 1062
+#define __ARCH_WANT_SYS_TIME
+__SYSCALL(__NR_time, sys_time)
+#define __NR_utime 1063
+#define __ARCH_WANT_SYS_UTIME
+__SYSCALL(__NR_utime, sys_utime)
+
+#define __NR_creat 1064
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_getdents 1065
+#define __ARCH_WANT_SYS_GETDENTS
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR_futimesat 1066
+__SYSCALL(__NR_futimesat, sys_futimesat)
+#define __NR_select 1067
+#define __ARCH_WANT_SYS_SELECT
+__SYSCALL(__NR_select, sys_select)
+#define __NR_poll 1068
+__SYSCALL(__NR_poll, sys_poll)
+#define __NR_epoll_wait 1069
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_ustat 1070
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_vfork 1071
+__SYSCALL(__NR_vfork, sys_vfork)
+#define __NR_wait4 1072
+__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_recv 1073
+__SYSCALL(__NR_recv, sys_recv)
+#define __NR_send 1074
+__SYSCALL(__NR_send, sys_send)
+#define __NR_bdflush 1075
+__SYSCALL(__NR_bdflush, sys_bdflush)
+#define __NR_umount 1076
+__SYSCALL(__NR_umount, sys_oldumount)
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __NR_uselib 1077
+__SYSCALL(__NR_uselib, sys_uselib)
+#define __NR__sysctl 1078
+__SYSCALL(__NR__sysctl, sys_sysctl)
+
+#define __NR_fork 1079
+#ifdef CONFIG_MMU
+__SYSCALL(__NR_fork, sys_fork)
+#else
+__SYSCALL(__NR_fork, sys_ni_syscall)
+#endif /* CONFIG_MMU */
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_fork+1)
+
+#endif /* __ARCH_WANT_SYSCALL_DEPRECATED */
+
+/*
+ * 32 bit systems traditionally used different
+ * syscalls for off_t and loff_t arguments, while
+ * 64 bit systems only need the off_t version.
+ * For new 32 bit platforms, there is no need to
+ * implement the old 32 bit off_t syscalls, so
+ * they take different names.
+ * Here we map the numbers so that both versions
+ * use the same syscall table layout.
+ */
+#if __BITS_PER_LONG == 64
+#define __NR_fcntl __NR3264_fcntl
+#define __NR_statfs __NR3264_statfs
+#define __NR_fstatfs __NR3264_fstatfs
+#define __NR_truncate __NR3264_truncate
+#define __NR_ftruncate __NR3264_truncate
+#define __NR_lseek __NR3264_lseek
+#define __NR_sendfile __NR3264_sendfile
+#define __NR_newfstatat __NR3264_fstatat
+#define __NR_fstat __NR3264_fstat
+#define __NR_mmap __NR3264_mmap
+#define __NR_fadvise64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat __NR3264_stat
+#define __NR_lstat __NR3264_lstat
+#endif
+#else
+#define __NR_fcntl64 __NR3264_fcntl
+#define __NR_statfs64 __NR3264_statfs
+#define __NR_fstatfs64 __NR3264_fstatfs
+#define __NR_truncate64 __NR3264_truncate
+#define __NR_ftruncate64 __NR3264_truncate
+#define __NR_llseek __NR3264_lseek
+#define __NR_sendfile64 __NR3264_sendfile
+#define __NR_fstatat64 __NR3264_fstatat
+#define __NR_fstat64 __NR3264_fstat
+#define __NR_mmap2 __NR3264_mmap
+#define __NR_fadvise64_64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat64 __NR3264_stat
+#define __NR_lstat64 __NR3264_lstat
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * These are required system calls, we should
+ * invert the logic eventually and let them
+ * be selected by default.
+ */
+#if __BITS_PER_LONG == 32
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_LLSEEK
+#endif
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_UNISTD_H */
diff --git a/include/asm-generic/user.h b/include/asm-generic/user.h
new file mode 100644
index 00000000000..8b9c3c960ae
--- /dev/null
+++ b/include/asm-generic/user.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_USER_H
+#define __ASM_GENERIC_USER_H
+/*
+ * This file may define a 'struct user' structure. However, it it only
+ * used for a.out file, which are not supported on new architectures.
+ */
+
+#endif	/* __ASM_GENERIC_USER_H */
diff --git a/include/asm-generic/vga.h b/include/asm-generic/vga.h
new file mode 100644
index 00000000000..36c8ff52016
--- /dev/null
+++ b/include/asm-generic/vga.h
@@ -0,0 +1,24 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef __ASM_GENERIC_VGA_H
+#define __ASM_GENERIC_VGA_H
+
+/*
+ *	On most architectures that support VGA, we can just
+ *	recalculate addresses and then access the videoram
+ *	directly without any black magic.
+ *
+ *	Everyone else needs to ioremap the address and use
+ *	proper I/O accesses.
+ */
+#ifndef VGA_MAP_MEM
+#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
+#endif
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#endif /* _ASM_GENERIC_VGA_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index f1736ca7922..6bdba10fef4 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -1,4 +1,57 @@
-#include <linux/section-names.h>
+/*
+ * Helper macros to support writing architecture specific
+ * linker scripts.
+ *
+ * A minimal linker scripts has following content:
+ * [This is a sample, architectures may have special requiriements]
+ *
+ * OUTPUT_FORMAT(...)
+ * OUTPUT_ARCH(...)
+ * ENTRY(...)
+ * SECTIONS
+ * {
+ *	. = START;
+ *	__init_begin = .;
+ *	HEAD_TEXT_SECTION
+ *	INIT_TEXT_SECTION(PAGE_SIZE)
+ *	INIT_DATA_SECTION(...)
+ *	PERCPU(PAGE_SIZE)
+ *	__init_end = .;
+ *
+ *	_stext = .;
+ *	TEXT_SECTION = 0
+ *	_etext = .;
+ *
+ *      _sdata = .;
+ *	RO_DATA_SECTION(PAGE_SIZE)
+ *	RW_DATA_SECTION(...)
+ *	_edata = .;
+ *
+ *	EXCEPTION_TABLE(...)
+ *	NOTES
+ *
+ *	__bss_start = .;
+ *	BSS_SECTION(0, 0)
+ *	__bss_stop = .;
+ *	_end = .;
+ *
+ *	/DISCARD/ : {
+ *		EXIT_TEXT
+ *		EXIT_DATA
+ *		EXIT_CALL
+ *	}
+ *	STABS_DEBUG
+ *	DWARF_DEBUG
+ * }
+ *
+ * [__init_begin, __init_end] is the init section that may be freed after init
+ * [_stext, _etext] is the text section
+ * [_sdata, _edata] is the data section
+ *
+ * Some of the included output section have their own set of constants.
+ * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
+ *               [__nosave_begin, __nosave_end] for the nosave data
+ */
 
 #ifndef LOAD_OFFSET
 #define LOAD_OFFSET 0
@@ -116,7 +169,36 @@
 	FTRACE_EVENTS()							\
 	TRACE_SYSCALLS()
 
-#define RO_DATA(align)							\
+/*
+ * Data section helpers
+ */
+#define NOSAVE_DATA							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__nosave_begin) = .;				\
+	*(.data.nosave)							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__nosave_end) = .;
+
+#define PAGE_ALIGNED_DATA(page_align)					\
+	. = ALIGN(page_align);						\
+	*(.data.page_aligned)
+
+#define READ_MOSTLY_DATA(align)						\
+	. = ALIGN(align);						\
+	*(.data.read_mostly)
+
+#define CACHELINE_ALIGNED_DATA(align)					\
+	. = ALIGN(align);						\
+	*(.data.cacheline_aligned)
+
+#define INIT_TASK(align)						\
+	. = ALIGN(align);						\
+	*(.data.init_task)
+
+/*
+ * Read only Data
+ */
+#define RO_DATA_SECTION(align)						\
 	. = ALIGN((align));						\
 	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
 		VMLINUX_SYMBOL(__start_rodata) = .;			\
@@ -270,9 +352,10 @@
 	}								\
 	. = ALIGN((align));
 
-/* RODATA provided for backward compatibility.
+/* RODATA & RO_DATA provided for backward compatibility.
  * All archs are supposed to use RO_DATA() */
-#define RODATA RO_DATA(4096)
+#define RODATA          RO_DATA_SECTION(4096)
+#define RO_DATA(align)  RO_DATA_SECTION(align)
 
 #define SECURITY_INIT							\
 	.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
@@ -330,16 +413,42 @@
 #endif
 
 /* Section used for early init (in .S files) */
-#define HEAD_TEXT  *(HEAD_TEXT_SECTION)
+#define HEAD_TEXT  *(.head.text)
+
+#define HEAD_TEXT_SECTION							\
+	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {		\
+		HEAD_TEXT						\
+	}
+
+/*
+ * Exception table
+ */
+#define EXCEPTION_TABLE(align)						\
+	. = ALIGN(align);						\
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___ex_table) = .;			\
+		*(__ex_table)						\
+		VMLINUX_SYMBOL(__stop___ex_table) = .;			\
+	}
+
+/*
+ * Init task
+ */
+#define INIT_TASK_DATA(align)						\
+	. = ALIGN(align);						\
+	.data.init_task : {						\
+		INIT_TASK						\
+	}
 
 /* init and exit section handling */
 #define INIT_DATA							\
 	*(.init.data)							\
 	DEV_DISCARD(init.data)						\
-	DEV_DISCARD(init.rodata)					\
 	CPU_DISCARD(init.data)						\
-	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.data)						\
+	*(.init.rodata)							\
+	DEV_DISCARD(init.rodata)					\
+	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.rodata)
 
 #define INIT_TEXT							\
@@ -363,9 +472,35 @@
 	CPU_DISCARD(exit.text)						\
 	MEM_DISCARD(exit.text)
 
-		/* DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to
-		the beginning of the section so we begin them at 0.  */
+#define EXIT_CALL							\
+	*(.exitcall.exit)
+
+/*
+ * bss (Block Started by Symbol) - uninitialized data
+ * zeroed during startup
+ */
+#define SBSS								\
+	.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {				\
+		*(.sbss)						\
+		*(.scommon)						\
+	}
+
+#define BSS(bss_align)							\
+	. = ALIGN(bss_align);						\
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {				\
+		VMLINUX_SYMBOL(__bss_start) = .;			\
+		*(.bss.page_aligned)					\
+		*(.dynbss)						\
+		*(.bss)							\
+		*(COMMON)						\
+		VMLINUX_SYMBOL(__bss_stop) = .;				\
+	}
+
+/*
+ * DWARF debug sections.
+ * Symbols in the DWARF debugging sections are relative to
+ * the beginning of the section so we begin them at 0.
+ */
 #define DWARF_DEBUG							\
 		/* DWARF 1 */						\
 		.debug          0 : { *(.debug) }			\
@@ -432,6 +567,12 @@
 		VMLINUX_SYMBOL(__stop_notes) = .;			\
 	}
 
+#define INIT_SETUP(initsetup_align)					\
+		. = ALIGN(initsetup_align);				\
+		VMLINUX_SYMBOL(__setup_start) = .;			\
+		*(.init.setup)						\
+		VMLINUX_SYMBOL(__setup_end) = .;
+
 #define INITCALLS							\
 	*(.initcallearly.init)						\
 	VMLINUX_SYMBOL(__early_initcall_end) = .;			\
@@ -453,6 +594,31 @@
   	*(.initcall7.init)						\
   	*(.initcall7s.init)
 
+#define INIT_CALLS							\
+		VMLINUX_SYMBOL(__initcall_start) = .;			\
+		INITCALLS						\
+		VMLINUX_SYMBOL(__initcall_end) = .;
+
+#define CON_INITCALL							\
+		VMLINUX_SYMBOL(__con_initcall_start) = .;		\
+		*(.con_initcall.init)					\
+		VMLINUX_SYMBOL(__con_initcall_end) = .;
+
+#define SECURITY_INITCALL						\
+		VMLINUX_SYMBOL(__security_initcall_start) = .;		\
+		*(.security_initcall.init)				\
+		VMLINUX_SYMBOL(__security_initcall_end) = .;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#define INIT_RAM_FS							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__initramfs_start) = .;				\
+	*(.init.ramfs)							\
+	VMLINUX_SYMBOL(__initramfs_end) = .;
+#else
+#define INITRAMFS
+#endif
+
 /**
  * PERCPU_VADDR - define output section for percpu area
  * @vaddr: explicit base address (optional)
@@ -509,3 +675,58 @@
 		*(.data.percpu.shared_aligned)				\
 		VMLINUX_SYMBOL(__per_cpu_end) = .;			\
 	}
+
+
+/*
+ * Definition of the high level *_SECTION macros
+ * They will fit only a subset of the architectures
+ */
+
+
+/*
+ * Writeable data.
+ * All sections are combined in a single .data section.
+ * The sections following CONSTRUCTORS are arranged so their
+ * typical alignment matches.
+ * A cacheline is typical/always less than a PAGE_SIZE so
+ * the sections that has this restriction (or similar)
+ * is located before the ones requiring PAGE_SIZE alignment.
+ * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
+ * matches the requirment of PAGE_ALIGNED_DATA.
+ *
+ * use 0 as page_align if page_aligned data is not used */
+#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask)	\
+	. = ALIGN(PAGE_SIZE);						\
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
+		INIT_TASK(inittask)					\
+		CACHELINE_ALIGNED_DATA(cacheline)			\
+		READ_MOSTLY_DATA(cacheline)				\
+		DATA_DATA						\
+		CONSTRUCTORS						\
+		NOSAVE_DATA(nosave)					\
+		PAGE_ALIGNED_DATA(pagealigned)				\
+	}
+
+#define INIT_TEXT_SECTION(inittext_align)				\
+	. = ALIGN(inittext_align);					\
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(_sinittext) = .;				\
+		INIT_TEXT						\
+		VMLINUX_SYMBOL(_einittext) = .;				\
+	}
+
+#define INIT_DATA_SECTION(initsetup_align)				\
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {		\
+		INIT_DATA						\
+		INIT_SETUP(initsetup_align)				\
+		INIT_CALLS						\
+		CON_INITCALL						\
+		SECURITY_INITCALL					\
+		INIT_RAM_FS						\
+	}
+
+#define BSS_SECTION(sbss_align, bss_align)				\
+	SBSS								\
+	BSS(bss_align)							\
+	. = ALIGN(4);
+
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index b84d8ae35e6..d4ddc22e46b 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -86,7 +86,17 @@ struct drm_device;
 
 #include "drm_os_linux.h"
 #include "drm_hashtab.h"
+#include "drm_mm.h"
 
+#define DRM_UT_CORE 		0x01
+#define DRM_UT_DRIVER		0x02
+#define DRM_UT_KMS		0x04
+#define DRM_UT_MODE		0x08
+
+extern void drm_ut_debug_printk(unsigned int request_level,
+				const char *prefix,
+				const char *function_name,
+				const char *format, ...);
 /***********************************************************************/
 /** \name DRM template customization defaults */
 /*@{*/
@@ -186,15 +196,57 @@ struct drm_device;
  * \param arg arguments
  */
 #if DRM_DEBUG_CODE
-#define DRM_DEBUG(fmt, arg...)						\
+#define DRM_DEBUG(fmt, args...)						\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_CORE, DRM_NAME, 		\
+					__func__, fmt, ##args);		\
+	} while (0)
+
+#define DRM_DEBUG_DRIVER(prefix, fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_DRIVER, prefix,		\
+					__func__, fmt, ##args);		\
+	} while (0)
+#define DRM_DEBUG_KMS(prefix, fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_KMS, prefix, 		\
+					 __func__, fmt, ##args);	\
+	} while (0)
+#define DRM_DEBUG_MODE(prefix, fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_MODE, prefix, 		\
+					 __func__, fmt, ##args);	\
+	} while (0)
+#define DRM_LOG(fmt, args...)						\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_CORE, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_KMS(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_KMS, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_MODE(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_MODE, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_DRIVER(fmt, args...)					\
 	do {								\
-		if ( drm_debug )			\
-			printk(KERN_DEBUG				\
-			       "[" DRM_NAME ":%s] " fmt ,	\
-			       __func__ , ##arg);			\
+		drm_ut_debug_printk(DRM_UT_DRIVER, NULL,		\
+					NULL, fmt, ##args);		\
 	} while (0)
 #else
+#define DRM_DEBUG_DRIVER(prefix, fmt, args...) do { } while (0)
+#define DRM_DEBUG_KMS(prefix, fmt, args...)	do { } while (0)
+#define DRM_DEBUG_MODE(prefix, fmt, args...)	do { } while (0)
 #define DRM_DEBUG(fmt, arg...)		 do { } while (0)
+#define DRM_LOG(fmt, arg...)		do { } while (0)
+#define DRM_LOG_KMS(fmt, args...) do { } while (0)
+#define DRM_LOG_MODE(fmt, arg...) do { } while (0)
+#define DRM_LOG_DRIVER(fmt, arg...) do { } while (0)
+
 #endif
 
 #define DRM_PROC_LIMIT (PAGE_SIZE-80)
@@ -237,15 +289,15 @@ struct drm_device;
  * \param dev DRM device.
  * \param filp file pointer of the caller.
  */
-#define LOCK_TEST_WITH_RETURN( dev, file_priv )				\
-do {									\
-	if (!_DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock) ||		\
-	    file_priv->master->lock.file_priv != file_priv)	{			\
+#define LOCK_TEST_WITH_RETURN( dev, _file_priv )				\
+do {										\
+	if (!_DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock) ||	\
+	    _file_priv->master->lock.file_priv != _file_priv)	{		\
 		DRM_ERROR( "%s called without lock held, held  %d owner %p %p\n",\
-			   __func__, _DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock),\
-			   file_priv->master->lock.file_priv, file_priv);		\
-		return -EINVAL;						\
-	}								\
+			   __func__, _DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock),\
+			   _file_priv->master->lock.file_priv, _file_priv);	\
+		return -EINVAL;							\
+	}									\
 } while (0)
 
 /**
@@ -502,26 +554,6 @@ struct drm_sigdata {
 };
 
 
-/*
- * Generic memory manager structs
- */
-
-struct drm_mm_node {
-	struct list_head fl_entry;
-	struct list_head ml_entry;
-	int free;
-	unsigned long start;
-	unsigned long size;
-	struct drm_mm *mm;
-	void *private;
-};
-
-struct drm_mm {
-	struct list_head fl_entry;
-	struct list_head ml_entry;
-};
-
-
 /**
  * Kernel side of a mapping
  */
@@ -1385,22 +1417,6 @@ extern char *drm_get_connector_status_name(enum drm_connector_status status);
 extern int drm_sysfs_connector_add(struct drm_connector *connector);
 extern void drm_sysfs_connector_remove(struct drm_connector *connector);
 
-/*
- * Basic memory manager support (drm_mm.c)
- */
-extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
-				       unsigned long size,
-				       unsigned alignment);
-extern void drm_mm_put_block(struct drm_mm_node * cur);
-extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, unsigned long size,
-					 unsigned alignment, int best_match);
-extern int drm_mm_init(struct drm_mm *mm, unsigned long start, unsigned long size);
-extern void drm_mm_takedown(struct drm_mm *mm);
-extern int drm_mm_clean(struct drm_mm *mm);
-extern unsigned long drm_mm_tail_space(struct drm_mm *mm);
-extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size);
-extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size);
-
 /* Graphics Execution Manager library functions (drm_gem.c) */
 int drm_gem_init(struct drm_device *dev);
 void drm_gem_destroy(struct drm_device *dev);
@@ -1522,18 +1538,14 @@ static __inline__ void *drm_calloc(size_t nmemb, size_t size, int area)
 
 static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
 {
-	u8 *addr;
-
-	if (size <= PAGE_SIZE)
+	if (size * nmemb <= PAGE_SIZE)
 	    return kcalloc(nmemb, size, GFP_KERNEL);
 
-	addr = vmalloc(nmemb * size);
-	if (!addr)
+	if (size != 0 && nmemb > ULONG_MAX / size)
 		return NULL;
 
-	memset(addr, 0, nmemb * size);
-
-	return addr;
+	return __vmalloc(size * nmemb,
+			 GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
 }
 
 static __inline void drm_free_large(void *ptr)
diff --git a/include/drm/drm_hashtab.h b/include/drm/drm_hashtab.h
index cd2b189e1be..0af087a4d3b 100644
--- a/include/drm/drm_hashtab.h
+++ b/include/drm/drm_hashtab.h
@@ -35,6 +35,8 @@
 #ifndef DRM_HASHTAB_H
 #define DRM_HASHTAB_H
 
+#include <linux/list.h>
+
 #define drm_hash_entry(_ptr, _type, _member) container_of(_ptr, _type, _member)
 
 struct drm_hash_item {
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
new file mode 100644
index 00000000000..5662f4278ef
--- /dev/null
+++ b/include/drm/drm_mm.h
@@ -0,0 +1,90 @@
+/**************************************************************************
+ *
+ * Copyright 2006-2008 Tungsten Graphics, Inc., Cedar Park, TX. USA.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Authors:
+ * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef _DRM_MM_H_
+#define _DRM_MM_H_
+
+/*
+ * Generic range manager structs
+ */
+#include <linux/list.h>
+
+struct drm_mm_node {
+	struct list_head fl_entry;
+	struct list_head ml_entry;
+	int free;
+	unsigned long start;
+	unsigned long size;
+	struct drm_mm *mm;
+	void *private;
+};
+
+struct drm_mm {
+	struct list_head fl_entry;
+	struct list_head ml_entry;
+	struct list_head unused_nodes;
+	int num_unused;
+	spinlock_t unused_lock;
+};
+
+/*
+ * Basic range manager support (drm_mm.c)
+ */
+
+extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *parent,
+					    unsigned long size,
+					    unsigned alignment);
+extern struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+						   unsigned long size,
+						   unsigned alignment);
+extern void drm_mm_put_block(struct drm_mm_node *cur);
+extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
+					      unsigned long size,
+					      unsigned alignment,
+					      int best_match);
+extern int drm_mm_init(struct drm_mm *mm, unsigned long start,
+		       unsigned long size);
+extern void drm_mm_takedown(struct drm_mm *mm);
+extern int drm_mm_clean(struct drm_mm *mm);
+extern unsigned long drm_mm_tail_space(struct drm_mm *mm);
+extern int drm_mm_remove_space_from_tail(struct drm_mm *mm,
+					 unsigned long size);
+extern int drm_mm_add_space_to_tail(struct drm_mm *mm,
+				    unsigned long size, int atomic);
+extern int drm_mm_pre_get(struct drm_mm *mm);
+
+static inline struct drm_mm *drm_get_mm(struct drm_mm_node *block)
+{
+	return block->mm;
+}
+
+#endif
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index fc55db78019..f8634ab53b8 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -254,6 +254,11 @@
 	{0x1002, 0x940A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x940B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
@@ -268,6 +273,8 @@
 	{0x1002, 0x9456, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x947A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -536,4 +543,6 @@
 	{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0042, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0046, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0, 0, 0}
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 3f0eaa397ef..a2df7030d49 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -135,6 +135,7 @@ header-y += posix_types.h
 header-y += ppdev.h
 header-y += prctl.h
 header-y += qnxtypes.h
+header-y += qnx4_fs.h
 header-y += radeonfb.h
 header-y += raw.h
 header-y += resource.h
@@ -308,9 +309,9 @@ unifdef-y += poll.h
 unifdef-y += ppp_defs.h
 unifdef-y += ppp-comp.h
 unifdef-y += ptrace.h
-unifdef-y += qnx4_fs.h
 unifdef-y += quota.h
 unifdef-y += random.h
+unifdef-y += rfkill.h
 unifdef-y += irqnr.h
 unifdef-y += reboot.h
 unifdef-y += reiserfs_fs.h
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 00000000000..dcad0ffd175
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,264 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+	LOOPBACK_DISABLED,
+	LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+	SSP_INTERFACE_MOTOROLA_SPI,
+	SSP_INTERFACE_TI_SYNC_SERIAL,
+	SSP_INTERFACE_NATIONAL_MICROWIRE,
+	SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+	SSP_MASTER,
+	SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+	u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+	u8 scr;	    /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+	SSP_RX_MSB,
+	SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+	SSP_TX_MSB,
+	SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+	SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+	SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+	SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+	SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+	SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+	SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+	SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+	SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+	SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+	SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+	INTERRUPT_TRANSFER,
+	POLLING_TRANSFER,
+	DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+	SSP_RX_1_OR_MORE_ELEM,
+	SSP_RX_4_OR_MORE_ELEM,
+	SSP_RX_8_OR_MORE_ELEM,
+	SSP_RX_16_OR_MORE_ELEM,
+	SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+	SSP_TX_1_OR_MORE_EMPTY_LOC,
+	SSP_TX_4_OR_MORE_EMPTY_LOC,
+	SSP_TX_8_OR_MORE_EMPTY_LOC,
+	SSP_TX_16_OR_MORE_EMPTY_LOC,
+	SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+	SSP_CLK_RISING_EDGE,
+	SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+	SSP_CLK_POL_IDLE_LOW,
+	SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+	SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+	SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+	SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+	SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+	SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+	SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+	SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+	SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+	SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+	SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+	SSP_MWIRE_WAIT_ZERO,
+	SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ *     SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ *     an input.
+ */
+enum ssp_duplex {
+	SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+	SSP_CHIP_SELECT,
+	SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *     SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *     each slave has a chipselect signal, but it's common that not
+ *     every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+	u16 bus_id;
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+	struct device *dev;
+	enum ssp_loopback lbm;
+	enum ssp_interface iface;
+	enum ssp_hierarchy hierarchy;
+	bool slave_tx_disable;
+	struct ssp_clock_params clk_freq;
+	enum ssp_rx_endian endian_rx;
+	enum ssp_tx_endian endian_tx;
+	enum ssp_data_size data_size;
+	enum ssp_mode com_mode;
+	enum ssp_rx_level_trig rx_lev_trig;
+	enum ssp_tx_level_trig tx_lev_trig;
+	enum ssp_spi_clk_phase clk_phase;
+	enum ssp_spi_clk_pol clk_pol;
+	enum ssp_microwire_ctrl_len ctrl_len;
+	enum ssp_microwire_wait_state wait_state;
+	enum ssp_duplex duplex;
+	void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 64a982ea5d5..5a5a7fd6249 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
 #define UART011_IFLS_TX4_8	(2 << 0)
 #define UART011_IFLS_TX6_8	(3 << 0)
 #define UART011_IFLS_TX7_8	(4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF	(5 << 3)
+#define UART011_IFLS_TX_HALF	(5 << 0)
 
 #define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
 #define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 2f1f95737ac..57b1846a3c8 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -10,6 +10,7 @@
  * @bus_width: Number of data lines wired up the slot
  * @detect_pin: GPIO pin wired to the card detect switch
  * @wp_pin: GPIO pin wired to the write protect sensor
+ * @detect_is_active_high: The state of the detect pin when it is active
  *
  * If a given slot is not present on the board, @bus_width should be
  * set to 0. The other fields are ignored in this case.
@@ -24,6 +25,7 @@ struct mci_slot_pdata {
 	unsigned int		bus_width;
 	int			detect_pin;
 	int			wp_pin;
+	bool			detect_is_active_high;
 };
 
 /**
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 12737be5860..2a04eb54c0d 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -590,6 +590,11 @@ static inline void bio_list_merge_head(struct bio_list *bl,
 	bl->head = bl2->head;
 }
 
+static inline struct bio *bio_list_peek(struct bio_list *bl)
+{
+	return bl->head;
+}
+
 static inline struct bio *bio_list_pop(struct bio_list *bl)
 {
 	struct bio *bio = bl->head;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ebdfde8fe55..8963d9149b5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -926,6 +926,7 @@ extern void blk_queue_alignment_offset(struct request_queue *q,
 				       unsigned int alignment);
 extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
 extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
+extern void blk_set_default_limits(struct queue_limits *lim);
 extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 			    sector_t offset);
 extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
@@ -1226,6 +1227,8 @@ struct block_device_operations {
 	int (*direct_access) (struct block_device *, sector_t,
 						void **, unsigned long *);
 	int (*media_changed) (struct gendisk *);
+	unsigned long long (*set_capacity) (struct gendisk *,
+						unsigned long long);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
 	struct module *owner;
diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
index eff898aac02..8cb05aae661 100644
--- a/include/linux/can/Kbuild
+++ b/include/linux/can/Kbuild
@@ -1,3 +1,4 @@
 header-y += raw.h
 header-y += bcm.h
 header-y += error.h
+header-y += netlink.h
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
new file mode 100644
index 00000000000..4a37a56f6cd
--- /dev/null
+++ b/include/linux/can/dev.h
@@ -0,0 +1,70 @@
+/*
+ * linux/can/dev.h
+ *
+ * Definitions for the CAN network device driver interface
+ *
+ * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
+ *               Varma Electronics Oy
+ *
+ * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ */
+
+#ifndef CAN_DEV_H
+#define CAN_DEV_H
+
+#include <linux/can/netlink.h>
+#include <linux/can/error.h>
+
+/*
+ * CAN mode
+ */
+enum can_mode {
+	CAN_MODE_STOP = 0,
+	CAN_MODE_START,
+	CAN_MODE_SLEEP
+};
+
+/*
+ * CAN common private data
+ */
+#define CAN_ECHO_SKB_MAX  4
+
+struct can_priv {
+	struct can_device_stats can_stats;
+
+	struct can_bittiming bittiming;
+	struct can_bittiming_const *bittiming_const;
+	struct can_clock clock;
+
+	enum can_state state;
+	u32 ctrlmode;
+
+	int restart_ms;
+	struct timer_list restart_timer;
+
+	struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX];
+
+	int (*do_set_bittiming)(struct net_device *dev);
+	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
+	int (*do_get_state)(const struct net_device *dev,
+			    enum can_state *state);
+};
+
+struct net_device *alloc_candev(int sizeof_priv);
+void free_candev(struct net_device *dev);
+
+int open_candev(struct net_device *dev);
+void close_candev(struct net_device *dev);
+
+int register_candev(struct net_device *dev);
+void unregister_candev(struct net_device *dev);
+
+int can_restart_now(struct net_device *dev);
+void can_bus_off(struct net_device *dev);
+
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx);
+void can_get_echo_skb(struct net_device *dev, int idx);
+
+#endif /* CAN_DEV_H */
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
new file mode 100644
index 00000000000..9ecbb7871c0
--- /dev/null
+++ b/include/linux/can/netlink.h
@@ -0,0 +1,113 @@
+/*
+ * linux/can/netlink.h
+ *
+ * Definitions for the CAN netlink interface
+ *
+ * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#ifndef CAN_NETLINK_H
+#define CAN_NETLINK_H
+
+#include <linux/types.h>
+
+/*
+ * CAN bit-timing parameters
+ *
+ * For futher information, please read chapter "8 BIT TIMING
+ * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
+ * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
+ */
+struct can_bittiming {
+	__u32 bitrate;		/* Bit-rate in bits/second */
+	__u32 sample_point;	/* Sample point in one-tenth of a percent */
+	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
+	__u32 prop_seg;		/* Propagation segment in TQs */
+	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
+	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
+	__u32 sjw;		/* Synchronisation jump width in TQs */
+	__u32 brp;		/* Bit-rate prescaler */
+};
+
+/*
+ * CAN harware-dependent bit-timing constant
+ *
+ * Used for calculating and checking bit-timing parameters
+ */
+struct can_bittiming_const {
+	char name[16];		/* Name of the CAN controller hardware */
+	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
+	__u32 tseg1_max;
+	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
+	__u32 tseg2_max;
+	__u32 sjw_max;		/* Synchronisation jump width */
+	__u32 brp_min;		/* Bit-rate prescaler */
+	__u32 brp_max;
+	__u32 brp_inc;
+};
+
+/*
+ * CAN clock parameters
+ */
+struct can_clock {
+	__u32 freq;		/* CAN system clock frequency in Hz */
+};
+
+/*
+ * CAN operational and error states
+ */
+enum can_state {
+	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
+	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
+	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
+	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
+	CAN_STATE_STOPPED,		/* Device is stopped */
+	CAN_STATE_SLEEPING,		/* Device is sleeping */
+	CAN_STATE_MAX
+};
+
+/*
+ * CAN controller mode
+ */
+struct can_ctrlmode {
+	__u32 mask;
+	__u32 flags;
+};
+
+#define CAN_CTRLMODE_LOOPBACK	0x1	/* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY	0x2 	/* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES	0x4	/* Triple sampling mode */
+
+/*
+ * CAN device statistics
+ */
+struct can_device_stats {
+	__u32 bus_error;	/* Bus errors */
+	__u32 error_warning;	/* Changes to error warning state */
+	__u32 error_passive;	/* Changes to error passive state */
+	__u32 bus_off;		/* Changes to bus off state */
+	__u32 arbitration_lost; /* Arbitration lost errors */
+	__u32 restarts;		/* CAN controller re-starts */
+};
+
+/*
+ * CAN netlink interface
+ */
+enum {
+	IFLA_CAN_UNSPEC,
+	IFLA_CAN_BITTIMING,
+	IFLA_CAN_BITTIMING_CONST,
+	IFLA_CAN_CLOCK,
+	IFLA_CAN_STATE,
+	IFLA_CAN_CTRLMODE,
+	IFLA_CAN_RESTART_MS,
+	IFLA_CAN_RESTART,
+	__IFLA_CAN_MAX
+};
+
+#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
+
+#endif /* CAN_NETLINK_H */
diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h
new file mode 100644
index 00000000000..01ee2aeb048
--- /dev/null
+++ b/include/linux/can/platform/sja1000.h
@@ -0,0 +1,35 @@
+#ifndef _CAN_PLATFORM_SJA1000_H_
+#define _CAN_PLATFORM_SJA1000_H_
+
+/* clock divider register */
+#define CDR_CLKOUT_MASK 0x07
+#define CDR_CLK_OFF	0x08 /* Clock off (CLKOUT pin) */
+#define CDR_RXINPEN	0x20 /* TX1 output is RX irq output */
+#define CDR_CBP		0x40 /* CAN input comparator bypass */
+#define CDR_PELICAN	0x80 /* PeliCAN mode */
+
+/* output control register */
+#define OCR_MODE_BIPHASE  0x00
+#define OCR_MODE_TEST     0x01
+#define OCR_MODE_NORMAL   0x02
+#define OCR_MODE_CLOCK    0x03
+#define OCR_MODE_MASK     0x07
+#define OCR_TX0_INVERT    0x04
+#define OCR_TX0_PULLDOWN  0x08
+#define OCR_TX0_PULLUP    0x10
+#define OCR_TX0_PUSHPULL  0x18
+#define OCR_TX1_INVERT    0x20
+#define OCR_TX1_PULLDOWN  0x40
+#define OCR_TX1_PULLUP    0x80
+#define OCR_TX1_PUSHPULL  0xc0
+#define OCR_TX_MASK       0xfc
+#define OCR_TX_SHIFT      2
+
+struct sja1000_platform_data {
+	u32 clock;	/* CAN bus oscillator frequency in Hz */
+
+	u8 ocr;		/* output control register */
+	u8 cdr;		/* clock divider register */
+};
+
+#endif	/* !_CAN_PLATFORM_SJA1000_H_ */
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
new file mode 100644
index 00000000000..63bc9a4d292
--- /dev/null
+++ b/include/linux/cb710.h
@@ -0,0 +1,231 @@
+/*
+ *  cb710/cb710.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+	struct platform_device	pdev;
+	void __iomem		*iobase;
+	cb710_irq_handler_t	irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+	struct pci_dev		*pdev;
+	void __iomem		*iobase;
+	unsigned		platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_t		slot_refs_count;
+#endif
+	unsigned		slot_mask;
+	unsigned		slots;
+	spinlock_t		irq_lock;
+	struct cb710_slot	slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC		1
+#define CB710_SLOT_MS		2
+#define CB710_SLOT_SM		4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t value)					\
+{									\
+	iowrite##t(value, slot->iobase + port);				\
+}									\
+									\
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
+	unsigned port)							\
+{									\
+	return ioread##t(slot->iobase + port);				\
+}									\
+									\
+static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t set, u##t clear)				\
+{									\
+	iowrite##t(							\
+		(ioread##t(slot->iobase + port) & ~clear)|set,		\
+		slot->iobase + port);					\
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+	struct platform_device *pdev)
+{
+	return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+	return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+	return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC	0x0F
+#define CB710_DUMP_REGS_MS	0x30
+#define CB710_DUMP_REGS_SM	0xC0
+#define CB710_DUMP_REGS_ALL	0xFF
+#define CB710_DUMP_REGS_MASK	0xFF
+
+#define CB710_DUMP_ACCESS_8	0x100
+#define CB710_DUMP_ACCESS_16	0x200
+#define CB710_DUMP_ACCESS_32	0x400
+#define CB710_DUMP_ACCESS_ALL	0x700
+#define CB710_DUMP_ACCESS_MASK	0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ *  cb710/sgbuf2.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/**
+ * cb710_sg_miter_stop_writing - stop mapping iteration after writing
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ *   Stops mapping iterator @miter.  @miter should have been started
+ *   started using sg_miter_start().  A stopped iteration can be
+ *   resumed by calling sg_miter_next() on it.  This is useful when
+ *   resources (kmap) need to be released during iteration.
+ *
+ *   This is a convenience wrapper that will be optimized out for arches
+ *   that don't need flush_kernel_dcache_page().
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
+{
+	if (miter->page)
+		flush_kernel_dcache_page(miter->page);
+	sg_miter_stop(miter);
+}
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_write_from_io();
+ *   cb710_sg_miter_stop_writing();
+ *
+ * Best-case writing (transfer to device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_read_to_io();
+ *   sg_miter_stop();
+ */
+
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Reads @count 32-bit words from register @port and stores it in
+ *   buffer iterated by @miter.  Data that would overflow the buffer
+ *   is silently ignored.  Iterator is advanced by 4*@count bytes
+ *   or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Writes @count 32-bit words to register @port from buffer iterated
+ *   through @miter.  If buffer ends before @count words are written
+ *   missing data is replaced by zeroes. @miter is advanced by 4*@count
+ *   bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
index fb4591977b0..f389e319a45 100644
--- a/include/linux/cdev.h
+++ b/include/linux/cdev.h
@@ -28,6 +28,8 @@ int cdev_add(struct cdev *, dev_t, unsigned);
 
 void cdev_del(struct cdev *);
 
+int cdev_index(struct inode *inode);
+
 void cd_forget(struct inode *);
 
 extern struct backing_dev_info directly_mappable_cdev_bdi;
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf444a..1d37f42ac29 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk);
  */
 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+			struct device *dev);
+
 #endif
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 3a1dbba4d3a..20a100fe2b4 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -143,3 +143,12 @@ extern void clockevents_notify(unsigned long reason, void *arg);
 #endif
 
 #endif
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+extern ktime_t clockevents_get_next_event(int cpu);
+#else
+static inline ktime_t clockevents_get_next_event(int cpu)
+{
+	return (ktime_t) { .tv64 = KTIME_MAX };
+}
+#endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 37bcb50a4d7..04fb5135b4e 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -261,6 +261,11 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+/* Are two types/vars the same type (ignoring qualifiers)? */
+#ifndef __same_type
+# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
+#endif
+
 /*
  * Prevent the compiler from merging or refetching accesses.  The compiler
  * is also forbidden from reordering successive instances of ACCESS_ONCE(),
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 3be4e5a27d8..6fc2bed368b 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -2,9 +2,8 @@
 #define __CRAMFS_H
 
 #include <linux/types.h>
+#include <linux/magic.h>
 
-#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
-#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
 #define CRAMFS_SIGNATURE	"Compressed ROMFS"
 
 /*
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 15156364d19..30b93b2a01a 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -180,10 +180,12 @@ d_iput:		no		no		no       yes
 #define DCACHE_REFERENCED	0x0008  /* Recently used, don't discard. */
 #define DCACHE_UNHASHED		0x0010	
 
-#define DCACHE_INOTIFY_PARENT_WATCHED	0x0020 /* Parent inode is watched */
+#define DCACHE_INOTIFY_PARENT_WATCHED	0x0020 /* Parent inode is watched by inotify */
 
 #define DCACHE_COOKIE		0x0040	/* For use by dcookie subsystem */
 
+#define DCACHE_FSNOTIFY_PARENT_WATCHED	0x0080 /* Parent inode is watched by some fsnotify listener */
+
 extern spinlock_t dcache_lock;
 extern seqlock_t rename_lock;
 
@@ -351,6 +353,11 @@ static inline int d_unhashed(struct dentry *dentry)
 	return (dentry->d_flags & DCACHE_UNHASHED);
 }
 
+static inline int d_unlinked(struct dentry *dentry)
+{
+	return d_unhashed(dentry) && !IS_ROOT(dentry);
+}
+
 static inline struct dentry *dget_parent(struct dentry *dentry)
 {
 	struct dentry *ret;
@@ -368,7 +375,7 @@ static inline int d_mountpoint(struct dentry *dentry)
 	return dentry->d_mounted;
 }
 
-extern struct vfsmount *lookup_mnt(struct vfsmount *, struct dentry *);
+extern struct vfsmount *lookup_mnt(struct path *);
 extern struct dentry *lookup_create(struct nameidata *nd, int is_dir);
 
 extern int sysctl_vfs_cache_pressure;
diff --git a/include/linux/device.h b/include/linux/device.h
index 5d5c197bad4..a4a7b10aaa4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -62,8 +62,6 @@ struct bus_type {
 	void (*shutdown)(struct device *dev);
 
 	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*suspend_late)(struct device *dev, pm_message_t state);
-	int (*resume_early)(struct device *dev);
 	int (*resume)(struct device *dev);
 
 	struct dev_pm_ops *pm;
@@ -291,9 +289,6 @@ struct device_type {
 	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	void (*release)(struct device *dev);
 
-	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*resume)(struct device *dev);
-
 	struct dev_pm_ops *pm;
 };
 
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index b9cd38603fd..0b3518c4235 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -81,8 +81,8 @@ struct dlm_lksb {
  * the cluster, the calling node joins it.
  */
 
-int dlm_new_lockspace(char *name, int namelen, dlm_lockspace_t **lockspace,
-		      uint32_t flags, int lvblen);
+int dlm_new_lockspace(const char *name, int namelen,
+		      dlm_lockspace_t **lockspace, uint32_t flags, int lvblen);
 
 /*
  * dlm_release_lockspace
diff --git a/include/linux/dnotify.h b/include/linux/dnotify.h
index 102a902b439..ecc06286226 100644
--- a/include/linux/dnotify.h
+++ b/include/linux/dnotify.h
@@ -10,7 +10,7 @@
 
 struct dnotify_struct {
 	struct dnotify_struct *	dn_next;
-	unsigned long		dn_mask;
+	__u32			dn_mask;
 	int			dn_fd;
 	struct file *		dn_filp;
 	fl_owner_t		dn_owner;
@@ -21,23 +21,18 @@ struct dnotify_struct {
 
 #ifdef CONFIG_DNOTIFY
 
-extern void __inode_dir_notify(struct inode *, unsigned long);
+#define DNOTIFY_ALL_EVENTS (FS_DELETE | FS_DELETE_CHILD |\
+			    FS_MODIFY | FS_MODIFY_CHILD |\
+			    FS_ACCESS | FS_ACCESS_CHILD |\
+			    FS_ATTRIB | FS_ATTRIB_CHILD |\
+			    FS_CREATE | FS_DN_RENAME |\
+			    FS_MOVED_FROM | FS_MOVED_TO)
+
 extern void dnotify_flush(struct file *, fl_owner_t);
 extern int fcntl_dirnotify(int, struct file *, unsigned long);
-extern void dnotify_parent(struct dentry *, unsigned long);
-
-static inline void inode_dir_notify(struct inode *inode, unsigned long event)
-{
-	if (inode->i_dnotify_mask & (event))
-		__inode_dir_notify(inode, event);
-}
 
 #else
 
-static inline void __inode_dir_notify(struct inode *inode, unsigned long event)
-{
-}
-
 static inline void dnotify_flush(struct file *filp, fl_owner_t id)
 {
 }
@@ -47,14 +42,6 @@ static inline int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
 	return -EINVAL;
 }
 
-static inline void dnotify_parent(struct dentry *dentry, unsigned long event)
-{
-}
-
-static inline void inode_dir_notify(struct inode *inode, unsigned long event)
-{
-}
-
 #endif /* CONFIG_DNOTIFY */
 
 #endif /* __KERNEL __ */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index a1f17abba7d..3d7a6687d24 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -182,6 +182,33 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
 	return compare_ether_addr(addr1, addr2);
 #endif
 }
+
+/**
+ * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
+ * @dev: Pointer to a device structure
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Compare passed address with all addresses of the device. Return true if the
+ * address if one of the device addresses.
+ *
+ * Note that this function calls compare_ether_addr_64bits() so take care of
+ * the right padding.
+ */
+static inline bool is_etherdev_addr(const struct net_device *dev,
+				    const u8 addr[6 + 2])
+{
+	struct netdev_hw_addr *ha;
+	int res = 1;
+
+	rcu_read_lock();
+	for_each_dev_addr(dev, ha) {
+		res = compare_ether_addr_64bits(addr, ha->addr);
+		if (!res)
+			break;
+	}
+	rcu_read_unlock();
+	return !res;
+}
 #endif	/* __KERNEL__ */
 
 /**
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 131b127b70f..9b660bd2e2b 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -26,11 +26,14 @@ struct ethtool_cmd {
 	__u8	phy_address;
 	__u8	transceiver;	/* Which transceiver to use */
 	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
 	__u16	speed_hi;
-	__u16	reserved2;
-	__u32	reserved[3];
+	__u8	eth_tp_mdix;
+	__u8	reserved2;
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
 };
 
 static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
@@ -563,6 +566,11 @@ struct ethtool_ops {
 #define SUPPORTED_Pause			(1 << 13)
 #define SUPPORTED_Asym_Pause		(1 << 14)
 #define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half		(1 << 0)
@@ -581,6 +589,11 @@ struct ethtool_ops {
 #define ADVERTISED_Pause		(1 << 13)
 #define ADVERTISED_Asym_Pause		(1 << 14)
 #define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -605,6 +618,7 @@ struct ethtool_ops {
 #define PORT_MII		0x02
 #define PORT_FIBRE		0x03
 #define PORT_BNC		0x04
+#define PORT_OTHER		0xff
 
 /* Which transceiver to use. */
 #define XCVR_INTERNAL		0x00
@@ -619,6 +633,11 @@ struct ethtool_ops {
 #define AUTONEG_DISABLE		0x00
 #define AUTONEG_ENABLE		0x01
 
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID	0x00
+#define ETH_TP_MDI		0x01
+#define ETH_TP_MDI_X		0x02
+
 /* Wake-On-Lan options. */
 #define WAKE_PHY		(1 << 0)
 #define WAKE_UCAST		(1 << 1)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 83d6b439724..ede84fa7da5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -729,8 +729,8 @@ struct inode {
 	struct timespec		i_atime;
 	struct timespec		i_mtime;
 	struct timespec		i_ctime;
-	unsigned int		i_blkbits;
 	blkcnt_t		i_blocks;
+	unsigned int		i_blkbits;
 	unsigned short          i_bytes;
 	umode_t			i_mode;
 	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
@@ -751,13 +751,12 @@ struct inode {
 		struct block_device	*i_bdev;
 		struct cdev		*i_cdev;
 	};
-	int			i_cindex;
 
 	__u32			i_generation;
 
-#ifdef CONFIG_DNOTIFY
-	unsigned long		i_dnotify_mask; /* Directory notify events */
-	struct dnotify_struct	*i_dnotify; /* for directory notifications */
+#ifdef CONFIG_FSNOTIFY
+	__u32			i_fsnotify_mask; /* all events this inode cares about */
+	struct hlist_head	i_fsnotify_mark_entries; /* fsnotify mark entries */
 #endif
 
 #ifdef CONFIG_INOTIFY
@@ -1321,7 +1320,7 @@ struct super_block {
 	struct rw_semaphore	s_umount;
 	struct mutex		s_lock;
 	int			s_count;
-	int			s_need_sync_fs;
+	int			s_need_sync;
 	atomic_t		s_active;
 #ifdef CONFIG_SECURITY
 	void                    *s_security;
@@ -1372,11 +1371,6 @@ struct super_block {
 	 * generic_show_options()
 	 */
 	char *s_options;
-
-	/*
-	 * storage for asynchronous operations
-	 */
-	struct list_head s_async_list;
 };
 
 extern struct timespec current_fs_time(struct super_block *sb);
@@ -1800,7 +1794,7 @@ extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data);
 extern int may_umount_tree(struct vfsmount *);
 extern int may_umount(struct vfsmount *);
 extern long do_mount(char *, char *, char *, unsigned long, void *);
-extern struct vfsmount *collect_mounts(struct vfsmount *, struct dentry *);
+extern struct vfsmount *collect_mounts(struct path *);
 extern void drop_collected_mounts(struct vfsmount *);
 
 extern int vfs_statfs(struct dentry *, struct kstatfs *);
@@ -1947,8 +1941,6 @@ extern struct super_block *freeze_bdev(struct block_device *);
 extern void emergency_thaw_all(void);
 extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
 extern int fsync_bdev(struct block_device *);
-extern int fsync_super(struct super_block *);
-extern int fsync_no_super(struct block_device *);
 #else
 static inline void bd_forget(struct inode *inode) {}
 static inline int sync_blockdev(struct block_device *bdev) { return 0; }
@@ -1964,6 +1956,7 @@ static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb)
 	return 0;
 }
 #endif
+extern int sync_filesystem(struct super_block *);
 extern const struct file_operations def_blk_fops;
 extern const struct file_operations def_chr_fops;
 extern const struct file_operations bad_sock_fops;
@@ -2082,12 +2075,8 @@ extern int filemap_fdatawrite_range(struct address_space *mapping,
 
 extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync);
 extern void sync_supers(void);
-extern void sync_filesystems(int wait);
-extern void __fsync_super(struct super_block *sb);
 extern void emergency_sync(void);
 extern void emergency_remount(void);
-extern int do_remount_sb(struct super_block *sb, int flags,
-			 void *data, int force);
 #ifdef CONFIG_BLOCK
 extern sector_t bmap(struct inode *, sector_t);
 #endif
@@ -2356,6 +2345,8 @@ extern void simple_release_fs(struct vfsmount **mount, int *count);
 extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
 			loff_t *ppos, const void *from, size_t available);
 
+extern int simple_fsync(struct file *, struct dentry *, int);
+
 #ifdef CONFIG_MIGRATION
 extern int buffer_migrate_page(struct address_space *,
 				struct page *, struct page *);
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 8300cab30f9..51b793466ff 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -17,6 +17,7 @@
 #define FS_ENET_PD_H
 
 #include <linux/string.h>
+#include <linux/of_mdio.h>
 #include <asm/types.h>
 
 #define FS_ENET_NAME	"fs_enet"
@@ -130,10 +131,7 @@ struct fs_platform_info {
 	
 	u32 device_flags;
 
-	int phy_addr;		/* the phy address (-1 no phy) */
-	char bus_id[16];
-	int phy_irq;		/* the phy irq (if it exists)  */
-
+	struct device_node *phy_node;
 	const struct fs_mii_bus_info *bus_info;
 
 	int rx_ring, tx_ring;	/* number of buffers on rx     */
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 00fbd5b245c..936f9aa8bb9 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -13,6 +13,7 @@
 
 #include <linux/dnotify.h>
 #include <linux/inotify.h>
+#include <linux/fsnotify_backend.h>
 #include <linux/audit.h>
 
 /*
@@ -22,19 +23,45 @@
 static inline void fsnotify_d_instantiate(struct dentry *entry,
 						struct inode *inode)
 {
+	__fsnotify_d_instantiate(entry, inode);
+
 	inotify_d_instantiate(entry, inode);
 }
 
+/* Notify this dentry's parent about a child's events. */
+static inline void fsnotify_parent(struct dentry *dentry, __u32 mask)
+{
+	__fsnotify_parent(dentry, mask);
+
+	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
+}
+
 /*
  * fsnotify_d_move - entry has been moved
  * Called with dcache_lock and entry->d_lock held.
  */
 static inline void fsnotify_d_move(struct dentry *entry)
 {
+	/*
+	 * On move we need to update entry->d_flags to indicate if the new parent
+	 * cares about events from this entry.
+	 */
+	__fsnotify_update_dcache_flags(entry);
+
 	inotify_d_move(entry);
 }
 
 /*
+ * fsnotify_link_count - inode's link count changed
+ */
+static inline void fsnotify_link_count(struct inode *inode)
+{
+	inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL);
+
+	fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+}
+
+/*
  * fsnotify_move - file old_name at old_dir was moved to new_name at new_dir
  */
 static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
@@ -42,42 +69,62 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 				 int isdir, struct inode *target, struct dentry *moved)
 {
 	struct inode *source = moved->d_inode;
-	u32 cookie = inotify_get_cookie();
+	u32 in_cookie = inotify_get_cookie();
+	u32 fs_cookie = fsnotify_get_cookie();
+	__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
+	__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
 
 	if (old_dir == new_dir)
-		inode_dir_notify(old_dir, DN_RENAME);
-	else {
-		inode_dir_notify(old_dir, DN_DELETE);
-		inode_dir_notify(new_dir, DN_CREATE);
-	}
+		old_dir_mask |= FS_DN_RENAME;
 
-	if (isdir)
+	if (isdir) {
 		isdir = IN_ISDIR;
-	inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir,cookie,old_name,
+		old_dir_mask |= FS_IN_ISDIR;
+		new_dir_mask |= FS_IN_ISDIR;
+	}
+
+	inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir, in_cookie, old_name,
 				  source);
-	inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name,
+	inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, in_cookie, new_name,
 				  source);
 
+	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
+	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
+
 	if (target) {
 		inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL);
 		inotify_inode_is_dead(target);
+
+		/* this is really a link_count change not a removal */
+		fsnotify_link_count(target);
 	}
 
 	if (source) {
 		inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL);
+		fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 	}
 	audit_inode_child(new_name, moved, new_dir);
 }
 
 /*
+ * fsnotify_inode_delete - and inode is being evicted from cache, clean up is needed
+ */
+static inline void fsnotify_inode_delete(struct inode *inode)
+{
+	__fsnotify_inode_delete(inode);
+}
+
+/*
  * fsnotify_nameremove - a filename was removed from a directory
  */
 static inline void fsnotify_nameremove(struct dentry *dentry, int isdir)
 {
+	__u32 mask = FS_DELETE;
+
 	if (isdir)
-		isdir = IN_ISDIR;
-	dnotify_parent(dentry, DN_DELETE);
-	inotify_dentry_parent_queue_event(dentry, IN_DELETE|isdir, 0, dentry->d_name.name);
+		mask |= FS_IN_ISDIR;
+
+	fsnotify_parent(dentry, mask);
 }
 
 /*
@@ -87,14 +134,9 @@ static inline void fsnotify_inoderemove(struct inode *inode)
 {
 	inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL);
 	inotify_inode_is_dead(inode);
-}
 
-/*
- * fsnotify_link_count - inode's link count changed
- */
-static inline void fsnotify_link_count(struct inode *inode)
-{
-	inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL);
+	fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+	__fsnotify_inode_delete(inode);
 }
 
 /*
@@ -102,10 +144,11 @@ static inline void fsnotify_link_count(struct inode *inode)
  */
 static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
 {
-	inode_dir_notify(inode, DN_CREATE);
 	inotify_inode_queue_event(inode, IN_CREATE, 0, dentry->d_name.name,
 				  dentry->d_inode);
 	audit_inode_child(dentry->d_name.name, dentry, inode);
+
+	fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
 }
 
 /*
@@ -115,11 +158,12 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
  */
 static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
 {
-	inode_dir_notify(dir, DN_CREATE);
 	inotify_inode_queue_event(dir, IN_CREATE, 0, new_dentry->d_name.name,
 				  inode);
 	fsnotify_link_count(inode);
 	audit_inode_child(new_dentry->d_name.name, new_dentry, dir);
+
+	fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0);
 }
 
 /*
@@ -127,10 +171,13 @@ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct
  */
 static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
 {
-	inode_dir_notify(inode, DN_CREATE);
-	inotify_inode_queue_event(inode, IN_CREATE | IN_ISDIR, 0, 
-				  dentry->d_name.name, dentry->d_inode);
+	__u32 mask = (FS_CREATE | FS_IN_ISDIR);
+	struct inode *d_inode = dentry->d_inode;
+
+	inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode);
 	audit_inode_child(dentry->d_name.name, dentry, inode);
+
+	fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
 }
 
 /*
@@ -139,14 +186,15 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
 static inline void fsnotify_access(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_ACCESS;
+	__u32 mask = FS_ACCESS;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	dnotify_parent(dentry, DN_ACCESS);
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -155,14 +203,15 @@ static inline void fsnotify_access(struct dentry *dentry)
 static inline void fsnotify_modify(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_MODIFY;
+	__u32 mask = FS_MODIFY;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	dnotify_parent(dentry, DN_MODIFY);
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -171,13 +220,15 @@ static inline void fsnotify_modify(struct dentry *dentry)
 static inline void fsnotify_open(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_OPEN;
+	__u32 mask = FS_OPEN;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -187,15 +238,16 @@ static inline void fsnotify_close(struct file *file)
 {
 	struct dentry *dentry = file->f_path.dentry;
 	struct inode *inode = dentry->d_inode;
-	const char *name = dentry->d_name.name;
 	fmode_t mode = file->f_mode;
-	u32 mask = (mode & FMODE_WRITE) ? IN_CLOSE_WRITE : IN_CLOSE_NOWRITE;
+	__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	inotify_dentry_parent_queue_event(dentry, mask, 0, name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
 }
 
 /*
@@ -204,13 +256,15 @@ static inline void fsnotify_close(struct file *file)
 static inline void fsnotify_xattr(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_ATTRIB;
+	__u32 mask = FS_ATTRIB;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -220,50 +274,37 @@ static inline void fsnotify_xattr(struct dentry *dentry)
 static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
 {
 	struct inode *inode = dentry->d_inode;
-	int dn_mask = 0;
-	u32 in_mask = 0;
+	__u32 mask = 0;
+
+	if (ia_valid & ATTR_UID)
+		mask |= FS_ATTRIB;
+	if (ia_valid & ATTR_GID)
+		mask |= FS_ATTRIB;
+	if (ia_valid & ATTR_SIZE)
+		mask |= FS_MODIFY;
 
-	if (ia_valid & ATTR_UID) {
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	}
-	if (ia_valid & ATTR_GID) {
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	}
-	if (ia_valid & ATTR_SIZE) {
-		in_mask |= IN_MODIFY;
-		dn_mask |= DN_MODIFY;
-	}
 	/* both times implies a utime(s) call */
 	if ((ia_valid & (ATTR_ATIME | ATTR_MTIME)) == (ATTR_ATIME | ATTR_MTIME))
-	{
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	} else if (ia_valid & ATTR_ATIME) {
-		in_mask |= IN_ACCESS;
-		dn_mask |= DN_ACCESS;
-	} else if (ia_valid & ATTR_MTIME) {
-		in_mask |= IN_MODIFY;
-		dn_mask |= DN_MODIFY;
-	}
-	if (ia_valid & ATTR_MODE) {
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	}
+		mask |= FS_ATTRIB;
+	else if (ia_valid & ATTR_ATIME)
+		mask |= FS_ACCESS;
+	else if (ia_valid & ATTR_MTIME)
+		mask |= FS_MODIFY;
+
+	if (ia_valid & ATTR_MODE)
+		mask |= FS_ATTRIB;
 
-	if (dn_mask)
-		dnotify_parent(dentry, dn_mask);
-	if (in_mask) {
+	if (mask) {
 		if (S_ISDIR(inode->i_mode))
-			in_mask |= IN_ISDIR;
-		inotify_inode_queue_event(inode, in_mask, 0, NULL, NULL);
-		inotify_dentry_parent_queue_event(dentry, in_mask, 0,
-						  dentry->d_name.name);
+			mask |= FS_IN_ISDIR;
+		inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+		fsnotify_parent(dentry, mask);
+		fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 	}
 }
 
-#ifdef CONFIG_INOTIFY	/* inotify helpers */
+#if defined(CONFIG_INOTIFY) || defined(CONFIG_FSNOTIFY)	/* notify helpers */
 
 /*
  * fsnotify_oldname_init - save off the old filename before we change it
@@ -281,7 +322,7 @@ static inline void fsnotify_oldname_free(const char *old_name)
 	kfree(old_name);
 }
 
-#else	/* CONFIG_INOTIFY */
+#else	/* CONFIG_INOTIFY || CONFIG_FSNOTIFY */
 
 static inline const char *fsnotify_oldname_init(const char *name)
 {
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
new file mode 100644
index 00000000000..44848aa830d
--- /dev/null
+++ b/include/linux/fsnotify_backend.h
@@ -0,0 +1,387 @@
+/*
+ * Filesystem access notification for Linux
+ *
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ */
+
+#ifndef __LINUX_FSNOTIFY_BACKEND_H
+#define __LINUX_FSNOTIFY_BACKEND_H
+
+#ifdef __KERNEL__
+
+#include <linux/idr.h> /* inotify uses this */
+#include <linux/fs.h> /* struct inode */
+#include <linux/list.h>
+#include <linux/path.h> /* struct path */
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/atomic.h>
+
+/*
+ * IN_* from inotfy.h lines up EXACTLY with FS_*, this is so we can easily
+ * convert between them.  dnotify only needs conversion at watch creation
+ * so no perf loss there.  fanotify isn't defined yet, so it can use the
+ * wholes if it needs more events.
+ */
+#define FS_ACCESS		0x00000001	/* File was accessed */
+#define FS_MODIFY		0x00000002	/* File was modified */
+#define FS_ATTRIB		0x00000004	/* Metadata changed */
+#define FS_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define FS_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FS_OPEN			0x00000020	/* File was opened */
+#define FS_MOVED_FROM		0x00000040	/* File was moved from X */
+#define FS_MOVED_TO		0x00000080	/* File was moved to Y */
+#define FS_CREATE		0x00000100	/* Subfile was created */
+#define FS_DELETE		0x00000200	/* Subfile was deleted */
+#define FS_DELETE_SELF		0x00000400	/* Self was deleted */
+#define FS_MOVE_SELF		0x00000800	/* Self was moved */
+
+#define FS_UNMOUNT		0x00002000	/* inode on umount fs */
+#define FS_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define FS_IN_IGNORED		0x00008000	/* last inotify event here */
+
+#define FS_IN_ISDIR		0x40000000	/* event occurred against dir */
+#define FS_IN_ONESHOT		0x80000000	/* only send event once */
+
+#define FS_DN_RENAME		0x10000000	/* file renamed */
+#define FS_DN_MULTISHOT		0x20000000	/* dnotify multishot */
+
+/* This inode cares about things that happen to its children.  Always set for
+ * dnotify and inotify. */
+#define FS_EVENT_ON_CHILD	0x08000000
+
+/* This is a list of all events that may get sent to a parernt based on fs event
+ * happening to inodes inside that directory */
+#define FS_EVENTS_POSS_ON_CHILD   (FS_ACCESS | FS_MODIFY | FS_ATTRIB |\
+				   FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN |\
+				   FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\
+				   FS_DELETE)
+
+/* listeners that hard code group numbers near the top */
+#define DNOTIFY_GROUP_NUM	UINT_MAX
+#define INOTIFY_GROUP_NUM	(DNOTIFY_GROUP_NUM-1)
+
+struct fsnotify_group;
+struct fsnotify_event;
+struct fsnotify_mark_entry;
+struct fsnotify_event_private_data;
+
+/*
+ * Each group much define these ops.  The fsnotify infrastructure will call
+ * these operations for each relevant group.
+ *
+ * should_send_event - given a group, inode, and mask this function determines
+ *		if the group is interested in this event.
+ * handle_event - main call for a group to handle an fs event
+ * free_group_priv - called when a group refcnt hits 0 to clean up the private union
+ * freeing-mark - this means that a mark has been flagged to die when everything
+ *		finishes using it.  The function is supplied with what must be a
+ *		valid group and inode to use to clean up.
+ */
+struct fsnotify_ops {
+	bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode, __u32 mask);
+	int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
+	void (*free_group_priv)(struct fsnotify_group *group);
+	void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+	void (*free_event_priv)(struct fsnotify_event_private_data *priv);
+};
+
+/*
+ * A group is a "thing" that wants to receive notification about filesystem
+ * events.  The mask holds the subset of event types this group cares about.
+ * refcnt on a group is up to the implementor and at any moment if it goes 0
+ * everything will be cleaned up.
+ */
+struct fsnotify_group {
+	/*
+	 * global list of all groups receiving events from fsnotify.
+	 * anchored by fsnotify_groups and protected by either fsnotify_grp_mutex
+	 * or fsnotify_grp_srcu depending on write vs read.
+	 */
+	struct list_head group_list;
+
+	/*
+	 * Defines all of the event types in which this group is interested.
+	 * This mask is a bitwise OR of the FS_* events from above.  Each time
+	 * this mask changes for a group (if it changes) the correct functions
+	 * must be called to update the global structures which indicate global
+	 * interest in event types.
+	 */
+	__u32 mask;
+
+	/*
+	 * How the refcnt is used is up to each group.  When the refcnt hits 0
+	 * fsnotify will clean up all of the resources associated with this group.
+	 * As an example, the dnotify group will always have a refcnt=1 and that
+	 * will never change.  Inotify, on the other hand, has a group per
+	 * inotify_init() and the refcnt will hit 0 only when that fd has been
+	 * closed.
+	 */
+	atomic_t refcnt;		/* things with interest in this group */
+	unsigned int group_num;		/* simply prevents accidental group collision */
+
+	const struct fsnotify_ops *ops;	/* how this group handles things */
+
+	/* needed to send notification to userspace */
+	struct mutex notification_mutex;	/* protect the notification_list */
+	struct list_head notification_list;	/* list of event_holder this group needs to send to userspace */
+	wait_queue_head_t notification_waitq;	/* read() on the notification file blocks on this waitq */
+	unsigned int q_len;			/* events on the queue */
+	unsigned int max_events;		/* maximum events allowed on the list */
+
+	/* stores all fastapth entries assoc with this group so they can be cleaned on unregister */
+	spinlock_t mark_lock;		/* protect mark_entries list */
+	atomic_t num_marks;		/* 1 for each mark entry and 1 for not being
+					 * past the point of no return when freeing
+					 * a group */
+	struct list_head mark_entries;	/* all inode mark entries for this group */
+
+	/* prevents double list_del of group_list.  protected by global fsnotify_grp_mutex */
+	bool on_group_list;
+
+	/* groups can define private fields here or use the void *private */
+	union {
+		void *private;
+#ifdef CONFIG_INOTIFY_USER
+		struct inotify_group_private_data {
+			spinlock_t	idr_lock;
+			struct idr      idr;
+			u32             last_wd;
+			struct fasync_struct    *fa;    /* async notification */
+			struct user_struct      *user;
+		} inotify_data;
+#endif
+	};
+};
+
+/*
+ * A single event can be queued in multiple group->notification_lists.
+ *
+ * each group->notification_list will point to an event_holder which in turns points
+ * to the actual event that needs to be sent to userspace.
+ *
+ * Seemed cheaper to create a refcnt'd event and a small holder for every group
+ * than create a different event for every group
+ *
+ */
+struct fsnotify_event_holder {
+	struct fsnotify_event *event;
+	struct list_head event_list;
+};
+
+/*
+ * Inotify needs to tack data onto an event.  This struct lets us later find the
+ * correct private data of the correct group.
+ */
+struct fsnotify_event_private_data {
+	struct fsnotify_group *group;
+	struct list_head event_list;
+};
+
+/*
+ * all of the information about the original object we want to now send to
+ * a group.  If you want to carry more info from the accessing task to the
+ * listener this structure is where you need to be adding fields.
+ */
+struct fsnotify_event {
+	/*
+	 * If we create an event we are also likely going to need a holder
+	 * to link to a group.  So embed one holder in the event.  Means only
+	 * one allocation for the common case where we only have one group
+	 */
+	struct fsnotify_event_holder holder;
+	spinlock_t lock;	/* protection for the associated event_holder and private_list */
+	/* to_tell may ONLY be dereferenced during handle_event(). */
+	struct inode *to_tell;	/* either the inode the event happened to or its parent */
+	/*
+	 * depending on the event type we should have either a path or inode
+	 * We hold a reference on path, but NOT on inode.  Since we have the ref on
+	 * the path, it may be dereferenced at any point during this object's
+	 * lifetime.  That reference is dropped when this object's refcnt hits
+	 * 0.  If this event contains an inode instead of a path, the inode may
+	 * ONLY be used during handle_event().
+	 */
+	union {
+		struct path path;
+		struct inode *inode;
+	};
+/* when calling fsnotify tell it if the data is a path or inode */
+#define FSNOTIFY_EVENT_NONE	0
+#define FSNOTIFY_EVENT_PATH	1
+#define FSNOTIFY_EVENT_INODE	2
+#define FSNOTIFY_EVENT_FILE	3
+	int data_type;		/* which of the above union we have */
+	atomic_t refcnt;	/* how many groups still are using/need to send this event */
+	__u32 mask;		/* the type of access, bitwise OR for FS_* event types */
+
+	u32 sync_cookie;	/* used to corrolate events, namely inotify mv events */
+	char *file_name;
+	size_t name_len;
+
+	struct list_head private_data_list;	/* groups can store private data here */
+};
+
+/*
+ * a mark is simply an entry attached to an in core inode which allows an
+ * fsnotify listener to indicate they are either no longer interested in events
+ * of a type matching mask or only interested in those events.
+ *
+ * these are flushed when an inode is evicted from core and may be flushed
+ * when the inode is modified (as seen by fsnotify_access).  Some fsnotify users
+ * (such as dnotify) will flush these when the open fd is closed and not at
+ * inode eviction or modification.
+ */
+struct fsnotify_mark_entry {
+	__u32 mask;			/* mask this mark entry is for */
+	/* we hold ref for each i_list and g_list.  also one ref for each 'thing'
+	 * in kernel that found and may be using this mark. */
+	atomic_t refcnt;		/* active things looking at this mark */
+	struct inode *inode;		/* inode this entry is associated with */
+	struct fsnotify_group *group;	/* group this mark entry is for */
+	struct hlist_node i_list;	/* list of mark_entries by inode->i_fsnotify_mark_entries */
+	struct list_head g_list;	/* list of mark_entries by group->i_fsnotify_mark_entries */
+	spinlock_t lock;		/* protect group, inode, and killme */
+	struct list_head free_i_list;	/* tmp list used when freeing this mark */
+	struct list_head free_g_list;	/* tmp list used when freeing this mark */
+	void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
+};
+
+#ifdef CONFIG_FSNOTIFY
+
+/* called from the vfs helpers */
+
+/* main fsnotify call to send events */
+extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+		     const char *name, u32 cookie);
+extern void __fsnotify_parent(struct dentry *dentry, __u32 mask);
+extern void __fsnotify_inode_delete(struct inode *inode);
+extern u32 fsnotify_get_cookie(void);
+
+static inline int fsnotify_inode_watches_children(struct inode *inode)
+{
+	/* FS_EVENT_ON_CHILD is set if the inode may care */
+	if (!(inode->i_fsnotify_mask & FS_EVENT_ON_CHILD))
+		return 0;
+	/* this inode might care about child events, does it care about the
+	 * specific set of events that can happen on a child? */
+	return inode->i_fsnotify_mask & FS_EVENTS_POSS_ON_CHILD;
+}
+
+/*
+ * Update the dentry with a flag indicating the interest of its parent to receive
+ * filesystem events when those events happens to this dentry->d_inode.
+ */
+static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
+{
+	struct dentry *parent;
+
+	assert_spin_locked(&dcache_lock);
+	assert_spin_locked(&dentry->d_lock);
+
+	parent = dentry->d_parent;
+	if (fsnotify_inode_watches_children(parent->d_inode))
+		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
+	else
+		dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
+}
+
+/*
+ * fsnotify_d_instantiate - instantiate a dentry for inode
+ * Called with dcache_lock held.
+ */
+static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
+{
+	if (!inode)
+		return;
+
+	assert_spin_locked(&dcache_lock);
+
+	spin_lock(&dentry->d_lock);
+	__fsnotify_update_dcache_flags(dentry);
+	spin_unlock(&dentry->d_lock);
+}
+
+/* called from fsnotify listeners, such as fanotify or dnotify */
+
+/* must call when a group changes its ->mask */
+extern void fsnotify_recalc_global_mask(void);
+/* get a reference to an existing or create a new group */
+extern struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num,
+						    __u32 mask,
+						    const struct fsnotify_ops *ops);
+/* run all marks associated with this group and update group->mask */
+extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
+/* drop reference on a group from fsnotify_obtain_group */
+extern void fsnotify_put_group(struct fsnotify_group *group);
+
+/* take a reference to an event */
+extern void fsnotify_get_event(struct fsnotify_event *event);
+extern void fsnotify_put_event(struct fsnotify_event *event);
+/* find private data previously attached to an event and unlink it */
+extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group,
+									   struct fsnotify_event *event);
+
+/* attach the event to the group notification queue */
+extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
+				     struct fsnotify_event_private_data *priv);
+/* true if the group notification queue is empty */
+extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
+/* return, but do not dequeue the first event on the notification queue */
+extern struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group);
+/* return AND dequeue the first event on the notification queue */
+extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group);
+
+/* functions used to manipulate the marks attached to inodes */
+
+/* run all marks associated with an inode and update inode->i_fsnotify_mask */
+extern void fsnotify_recalc_inode_mask(struct inode *inode);
+extern void fsnotify_init_mark(struct fsnotify_mark_entry *entry, void (*free_mark)(struct fsnotify_mark_entry *entry));
+/* find (and take a reference) to a mark associated with group and inode */
+extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
+/* attach the mark to both the group and the inode */
+extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode);
+/* given a mark, flag it to be freed when all references are dropped */
+extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry);
+/* run all the marks in a group, and flag them to be freed */
+extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
+extern void fsnotify_get_mark(struct fsnotify_mark_entry *entry);
+extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry);
+extern void fsnotify_unmount_inodes(struct list_head *list);
+
+/* put here because inotify does some weird stuff when destroying watches */
+extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
+						    void *data, int data_is, const char *name,
+						    u32 cookie);
+
+#else
+
+static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+			    const char *name, u32 cookie)
+{}
+
+static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+{}
+
+static inline void __fsnotify_inode_delete(struct inode *inode)
+{}
+
+static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
+{}
+
+static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
+{}
+
+static inline u32 fsnotify_get_cookie(void)
+{
+	return 0;
+}
+
+static inline void fsnotify_unmount_inodes(struct list_head *list)
+{}
+
+#endif	/* CONFIG_FSNOTIFY */
+
+#endif	/* __KERNEL __ */
+
+#endif	/* __LINUX_FSNOTIFY_BACKEND_H */
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 162e5defe68..d41ed593f79 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -121,6 +121,13 @@ struct fuse_file_lock {
 #define FUSE_BIG_WRITES		(1 << 5)
 
 /**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
  * Release flags
  */
 #define FUSE_RELEASE_FLUSH	(1 << 0)
@@ -210,6 +217,9 @@ enum fuse_opcode {
 	FUSE_DESTROY       = 38,
 	FUSE_IOCTL         = 39,
 	FUSE_POLL          = 40,
+
+	/* CUSE specific operations */
+	CUSE_INIT          = 4096,
 };
 
 enum fuse_notify_code {
@@ -401,6 +411,27 @@ struct fuse_init_out {
 	__u32	max_write;
 };
 
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+};
+
+struct cuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+	__u32	max_read;
+	__u32	max_write;
+	__u32	dev_major;		/* chardev major */
+	__u32	dev_minor;		/* chardev minor */
+	__u32	spare[10];
+};
+
 struct fuse_interrupt_in {
 	__u64	unique;
 };
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 149fda264c8..7cbd38d363a 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -114,6 +114,7 @@ struct hd_struct {
 #define GENHD_FL_UP				16
 #define GENHD_FL_SUPPRESS_PARTITION_INFO	32
 #define GENHD_FL_EXT_DEVT			64 /* allow extended devt */
+#define GENHD_FL_NATIVE_CAPACITY		128
 
 #define BLK_SCSI_MAX_CMDS	(256)
 #define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 0bbc15f5453..3760e7c5de0 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -85,6 +85,9 @@ struct vm_area_struct;
 			__GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\
 			__GFP_NORETRY|__GFP_NOMEMALLOC)
 
+/* Control slab gfp mask during early boot */
+#define SLAB_GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)
+
 /* Control allocation constraints */
 #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE)
 
diff --git a/include/linux/hid.h b/include/linux/hid.h
index a72876e4358..53489fd4d70 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -238,6 +238,42 @@ struct hid_item {
 #define HID_GD_RIGHT		0x00010092
 #define HID_GD_LEFT		0x00010093
 
+#define HID_DG_DIGITIZER	0x000d0001
+#define HID_DG_PEN		0x000d0002
+#define HID_DG_LIGHTPEN		0x000d0003
+#define HID_DG_TOUCHSCREEN	0x000d0004
+#define HID_DG_TOUCHPAD		0x000d0005
+#define HID_DG_STYLUS		0x000d0020
+#define HID_DG_PUCK		0x000d0021
+#define HID_DG_FINGER		0x000d0022
+#define HID_DG_TIPPRESSURE	0x000d0030
+#define HID_DG_BARRELPRESSURE	0x000d0031
+#define HID_DG_INRANGE		0x000d0032
+#define HID_DG_TOUCH		0x000d0033
+#define HID_DG_UNTOUCH		0x000d0034
+#define HID_DG_TAP		0x000d0035
+#define HID_DG_TABLETFUNCTIONKEY	0x000d0039
+#define HID_DG_PROGRAMCHANGEKEY	0x000d003a
+#define HID_DG_INVERT		0x000d003c
+#define HID_DG_TIPSWITCH	0x000d0042
+#define HID_DG_TIPSWITCH2	0x000d0043
+#define HID_DG_BARRELSWITCH	0x000d0044
+#define HID_DG_ERASER		0x000d0045
+#define HID_DG_TABLETPICK	0x000d0046
+/*
+ * as of May 20, 2009 the usages below are not yet in the official USB spec
+ * but are being pushed by Microsft as described in their paper "Digitizer
+ * Drivers for Windows Touch and Pen-Based Computers"
+ */
+#define HID_DG_CONFIDENCE	0x000d0047
+#define HID_DG_WIDTH		0x000d0048
+#define HID_DG_HEIGHT		0x000d0049
+#define HID_DG_CONTACTID	0x000d0051
+#define HID_DG_INPUTMODE	0x000d0052
+#define HID_DG_DEVICEINDEX	0x000d0053
+#define HID_DG_CONTACTCOUNT	0x000d0054
+#define HID_DG_CONTACTMAX	0x000d0055
+
 /*
  * HID report types --- Ouch! HID spec says 1 2 3!
  */
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 0d2f7c8a33d..7400900de94 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -30,8 +30,11 @@ struct hrtimer_cpu_base;
  * Mode arguments of xxx_hrtimer functions:
  */
 enum hrtimer_mode {
-	HRTIMER_MODE_ABS,	/* Time value is absolute */
-	HRTIMER_MODE_REL,	/* Time value is relative to now */
+	HRTIMER_MODE_ABS = 0x0,		/* Time value is absolute */
+	HRTIMER_MODE_REL = 0x1,		/* Time value is relative to now */
+	HRTIMER_MODE_PINNED = 0x02,	/* Timer is bound to CPU */
+	HRTIMER_MODE_ABS_PINNED = 0x02,
+	HRTIMER_MODE_REL_PINNED = 0x03,
 };
 
 /*
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 8ed591b0887..4d5e57ff661 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -14,6 +14,8 @@
 struct ocores_i2c_platform_data {
 	u32 regstep;   /* distance between registers */
 	u32 clock_khz; /* input clock in kHz */
+	u8 num_devices; /* number of devices in the devices list */
+	struct i2c_board_info const *devices; /* devices connected to the bus */
 };
 
 #endif /* _LINUX_I2C_OCORES_H */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 867cb68d846..a6c6a2fad7c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -178,7 +178,7 @@ typedef u8 hwif_chipset_t;
 /*
  * Structure to hold all information about the location of this port
  */
-typedef struct hw_regs_s {
+struct ide_hw {
 	union {
 		struct ide_io_ports	io_ports;
 		unsigned long		io_ports_array[IDE_NR_PORTS];
@@ -186,12 +186,11 @@ typedef struct hw_regs_s {
 
 	int		irq;			/* our irq number */
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
-	hwif_chipset_t  chipset;
 	struct device	*dev, *parent;
 	unsigned long	config;
-} hw_regs_t;
+};
 
-static inline void ide_std_init_ports(hw_regs_t *hw,
+static inline void ide_std_init_ports(struct ide_hw *hw,
 				      unsigned long io_addr,
 				      unsigned long ctl_addr)
 {
@@ -218,21 +217,12 @@ static inline void ide_std_init_ports(hw_regs_t *hw,
 
 /*
  * Special Driver Flags
- *
- * set_geometry	: respecify drive geometry
- * recalibrate	: seek to cyl 0
- * set_multmode	: set multmode count
- * reserved	: unused
  */
-typedef union {
-	unsigned all			: 8;
-	struct {
-		unsigned set_geometry	: 1;
-		unsigned recalibrate	: 1;
-		unsigned set_multmode	: 1;
-		unsigned reserved	: 5;
-	} b;
-} special_t;
+enum {
+	IDE_SFLAG_SET_GEOMETRY		= (1 << 0),
+	IDE_SFLAG_RECALIBRATE		= (1 << 1),
+	IDE_SFLAG_SET_MULTMODE		= (1 << 2),
+};
 
 /*
  * Status returned from various ide_ functions
@@ -391,6 +381,7 @@ struct ide_drive_s;
 struct ide_disk_ops {
 	int		(*check)(struct ide_drive_s *, const char *);
 	int		(*get_capacity)(struct ide_drive_s *);
+	u64		(*set_capacity)(struct ide_drive_s *, u64);
 	void		(*setup)(struct ide_drive_s *);
 	void		(*flush)(struct ide_drive_s *);
 	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
@@ -468,6 +459,8 @@ enum {
 	IDE_DFLAG_NICE1			= (1 << 5),
 	/* device is physically present */
 	IDE_DFLAG_PRESENT		= (1 << 6),
+	/* disable Host Protected Area */
+	IDE_DFLAG_NOHPA			= (1 << 7),
 	/* id read from device (synthetic if not set) */
 	IDE_DFLAG_ID_READ		= (1 << 8),
 	IDE_DFLAG_NOPROBE		= (1 << 9),
@@ -506,6 +499,7 @@ enum {
 	/* write protect */
 	IDE_DFLAG_WP			= (1 << 29),
 	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 30),
+	IDE_DFLAG_NIEN_QUIRK		= (1 << 31),
 };
 
 struct ide_drive_s {
@@ -530,14 +524,13 @@ struct ide_drive_s {
 	unsigned long sleep;		/* sleep until this time */
 	unsigned long timeout;		/* max time to wait for irq */
 
-	special_t	special;	/* special action flags */
+	u8	special_flags;		/* special action flags */
 
 	u8	select;			/* basic drive/head select reg value */
 	u8	retry_pio;		/* retrying dma capable host in pio */
 	u8	waiting_for_dma;	/* dma currently in progress */
 	u8	dma;			/* atapi dma flag */
 
-        u8	quirk_list;	/* considered quirky, set for a specific host */
         u8	init_speed;	/* transfer rate set at boot */
         u8	current_speed;	/* current transfer rate set */
 	u8	desired_speed;	/* desired transfer rate set */
@@ -562,8 +555,7 @@ struct ide_drive_s {
 	unsigned int	drive_data;	/* used by set_pio_mode/dev_select() */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
-	u64		probed_capacity;/* initial reported media capacity (ide-cd only currently) */
-
+	u64		probed_capacity;/* initial/native media capacity */
 	u64		capacity64;	/* total number of sectors */
 
 	int		lun;		/* logical unit */
@@ -1222,7 +1214,7 @@ static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
 }
 
 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
-			 hw_regs_t *, hw_regs_t **);
+			 struct ide_hw *, struct ide_hw **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1461,16 +1453,18 @@ static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
 void ide_register_region(struct gendisk *);
 void ide_unregister_region(struct gendisk *);
 
+void ide_check_nien_quirk_list(ide_drive_t *);
 void ide_undecoded_slave(ide_drive_t *);
 
 void ide_port_apply_params(ide_hwif_t *);
 int ide_sysfs_register_port(ide_hwif_t *);
 
-struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
+				unsigned int);
 void ide_host_free(struct ide_host *);
 int ide_host_register(struct ide_host *, const struct ide_port_info *,
-		      hw_regs_t **);
-int ide_host_add(const struct ide_port_info *, hw_regs_t **,
+		      struct ide_hw **);
+int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
 		 struct ide_host **);
 void ide_host_remove(struct ide_host *);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 4b501b48ce8..a9173d5434d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -493,6 +493,7 @@ struct ieee80211s_hdr {
 /* Mesh flags */
 #define MESH_FLAGS_AE_A4 	0x1
 #define MESH_FLAGS_AE_A5_A6	0x2
+#define MESH_FLAGS_AE		0x3
 #define MESH_FLAGS_PS_DEEP	0x4
 
 /**
@@ -540,10 +541,10 @@ struct ieee80211_tim_ie {
 	u8 dtim_period;
 	u8 bitmap_ctrl;
 	/* variable size: 1 - 251 bytes */
-	u8 virtual_map[0];
+	u8 virtual_map[1];
 } __attribute__ ((packed));
 
-#define WLAN_SA_QUERY_TR_ID_LEN 16
+#define WLAN_SA_QUERY_TR_ID_LEN 2
 
 struct ieee80211_mgmt {
 	__le16 frame_control;
@@ -1068,8 +1069,12 @@ enum ieee80211_category {
 	WLAN_CATEGORY_DLS = 2,
 	WLAN_CATEGORY_BACK = 3,
 	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_HT = 7,
 	WLAN_CATEGORY_SA_QUERY = 8,
+	WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
 	WLAN_CATEGORY_WMM = 17,
+	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
+	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
 };
 
 /* SPECTRUM_MGMT action code */
@@ -1081,6 +1086,15 @@ enum ieee80211_spectrum_mgmt_actioncode {
 	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
 };
 
+/* Security key length */
+enum ieee80211_key_len {
+	WLAN_KEY_LEN_WEP40 = 5,
+	WLAN_KEY_LEN_WEP104 = 13,
+	WLAN_KEY_LEN_CCMP = 16,
+	WLAN_KEY_LEN_TKIP = 32,
+	WLAN_KEY_LEN_AES_CMAC = 16,
+};
+
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element
  *
@@ -1261,7 +1275,9 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
 		if (ieee80211_has_protected(hdr->frame_control))
 			return true;
 		category = ((u8 *) hdr) + 24;
-		return *category != WLAN_CATEGORY_PUBLIC;
+		return *category != WLAN_CATEGORY_PUBLIC &&
+			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
 	}
 
 	return false;
@@ -1383,4 +1399,43 @@ static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
 		return -1;
 }
 
+/**
+ * ieee80211_tu_to_usec - convert time units (TU) to microseconds
+ * @tu: the TUs
+ */
+static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
+{
+	return 1024 * tu;
+}
+
+/**
+ * ieee80211_check_tim - check if AID bit is set in TIM
+ * @tim: the TIM IE
+ * @tim_len: length of the TIM IE
+ * @aid: the AID to look for
+ */
+static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
+				       u8 tim_len, u16 aid)
+{
+	u8 mask;
+	u8 index, indexn1, indexn2;
+
+	if (unlikely(!tim || tim_len < sizeof(*tim)))
+		return false;
+
+	aid &= 0x3fff;
+	index = aid / 8;
+	mask  = 1 << (aid & 7);
+
+	indexn1 = tim->bitmap_ctrl & 0xfe;
+	indexn2 = tim_len + indexn1 - 4;
+
+	if (index < indexn1 || index > indexn2)
+		return false;
+
+	index -= indexn1;
+
+	return !!(tim->virtual_map[index] & mask);
+}
+
 #endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index 1108f3e099e..b9a6229f3be 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -67,6 +67,9 @@
 #define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
 #define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
 #define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
+#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
+					 * release skb->dst
+					 */
 
 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 5ff89809a58..b554300ef8b 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -86,6 +86,8 @@
 #define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
 #define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
 #define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154	  804
+#define ARPHRD_IEEE802154_PHY	  805
 
 #define ARPHRD_PHONET	820		/* PhoNet media type		*/
 #define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index cfe4fe1b713..ae3a1871413 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -79,6 +79,7 @@
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
 
 /*
@@ -106,6 +107,7 @@
 #define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
 #define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
 #define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
+#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
 
 /*
  *	This is an Ethernet frame header.
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index 18db0668065..dea7d6b7cf9 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -46,6 +46,8 @@ struct sockaddr_ll
 #define PACKET_VERSION			10
 #define PACKET_HDRLEN			11
 #define PACKET_RESERVE			12
+#define PACKET_TX_RING			13
+#define PACKET_LOSS			14
 
 struct tpacket_stats
 {
@@ -63,14 +65,22 @@ struct tpacket_auxdata
 	__u16		tp_vlan_tci;
 };
 
+/* Rx ring - header status */
+#define TP_STATUS_KERNEL	0x0
+#define TP_STATUS_USER		0x1
+#define TP_STATUS_COPY		0x2
+#define TP_STATUS_LOSING	0x4
+#define TP_STATUS_CSUMNOTREADY	0x8
+
+/* Tx ring - header status */
+#define TP_STATUS_AVAILABLE	0x0
+#define TP_STATUS_SEND_REQUEST	0x1
+#define TP_STATUS_SENDING	0x2
+#define TP_STATUS_WRONG_FORMAT	0x4
+
 struct tpacket_hdr
 {
 	unsigned long	tp_status;
-#define TP_STATUS_KERNEL	0
-#define TP_STATUS_USER		1
-#define TP_STATUS_COPY		2
-#define TP_STATUS_LOSING	4
-#define TP_STATUS_CSUMNOTREADY	8
 	unsigned int	tp_len;
 	unsigned int	tp_snaplen;
 	unsigned short	tp_mac;
@@ -135,5 +145,6 @@ struct packet_mreq
 #define PACKET_MR_MULTICAST	0
 #define PACKET_MR_PROMISC	1
 #define PACKET_MR_ALLMULTI	2
+#define PACKET_MR_UNICAST	3
 
 #endif
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 049d6c9428d..915ba5789f0 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -55,6 +55,7 @@
 #define IFF_NO_PI	0x1000
 #define IFF_ONE_QUEUE	0x2000
 #define IFF_VNET_HDR	0x4000
+#define IFF_TUN_EXCL	0x8000
 
 /* Features for GSO (TUNSETOFFLOAD). */
 #define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 5a9aae4adb4..5eb9b0f857e 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -44,7 +44,7 @@ struct ip_tunnel_prl {
 	__u16			flags;
 	__u16			__reserved;
 	__u32			datalen;
-	__u32			__reserved2;
+	__u32			rs_delay;
 	/* data follows */
 };
 
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index e1ff5b14310..7ff9af1d0f0 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -118,8 +118,7 @@ extern int vlan_hwaccel_do_receive(struct sk_buff *skb);
 extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 			    unsigned int vlan_tci, struct sk_buff *skb);
 extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-			  unsigned int vlan_tci,
-			  struct napi_gro_fraginfo *info);
+			  unsigned int vlan_tci);
 
 #else
 static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
@@ -154,8 +153,7 @@ static inline int vlan_gro_receive(struct napi_struct *napi,
 }
 
 static inline int vlan_gro_frags(struct napi_struct *napi,
-				 struct vlan_group *grp, unsigned int vlan_tci,
-				 struct napi_gro_fraginfo *info)
+				 struct vlan_group *grp, unsigned int vlan_tci)
 {
 	return NET_RX_DROP;
 }
diff --git a/include/linux/in.h b/include/linux/in.h
index d60122a3a08..cf196da04ec 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -107,6 +107,7 @@ struct in_addr {
 #define MCAST_JOIN_SOURCE_GROUP		46
 #define MCAST_LEAVE_SOURCE_GROUP	47
 #define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
 
 #define MCAST_EXCLUDE	0
 #define MCAST_INCLUDE	1
diff --git a/include/linux/init.h b/include/linux/init.h
index 0e06c176f18..b2189803f19 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -2,8 +2,6 @@
 #define _LINUX_INIT_H
 
 #include <linux/compiler.h>
-#include <linux/section-names.h>
-#include <linux/stringify.h>
 
 /* These macros are used to mark some functions or 
  * initialized data (doesn't apply to uninitialized data)
@@ -101,7 +99,7 @@
 #define __memexitconst   __section(.memexit.rodata)
 
 /* For assembly routines */
-#define __HEAD		.section	__stringify(HEAD_TEXT_SECTION),"ax"
+#define __HEAD		.section	".head.text","ax"
 #define __INIT		.section	".init.text","ax"
 #define __FINIT		.previous
 
@@ -225,7 +223,8 @@ struct obs_kernel_param {
  * obs_kernel_param "array" too far apart in .init.setup.
  */
 #define __setup_param(str, unique_id, fn, early)			\
-	static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \
+	static const char __setup_str_##unique_id[] __initconst	\
+		__aligned(1) = str; \
 	static struct obs_kernel_param __setup_##unique_id	\
 		__used __section(.init.setup)			\
 		__attribute__((aligned((sizeof(long)))))	\
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index ff374ceface..c41e812e9d5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -183,6 +183,7 @@ extern void disable_irq(unsigned int irq);
 extern void enable_irq(unsigned int irq);
 
 /* The following three functions are for the core kernel use only. */
+#ifdef CONFIG_GENERIC_HARDIRQS
 extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
 #ifdef CONFIG_PM_SLEEP
@@ -190,6 +191,11 @@ extern int check_wakeup_irqs(void);
 #else
 static inline int check_wakeup_irqs(void) { return 0; }
 #endif
+#else
+static inline void suspend_device_irqs(void) { };
+static inline void resume_device_irqs(void) { };
+static inline int check_wakeup_irqs(void) { return 0; }
+#endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 476d9464ac8..c662efa6828 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -169,6 +169,12 @@ struct ipv6_devconf {
 	__s32		accept_dad;
 	void		*sysctl;
 };
+
+struct ipv6_params {
+	__s32 disable_ipv6;
+	__s32 autoconf;
+};
+extern struct ipv6_params ipv6_defaults;
 #endif
 
 /* index values for the variables in ipv6_devconf */
diff --git a/include/linux/isdn/capilli.h b/include/linux/isdn/capilli.h
index 35e9b0fd014..7acb87a4487 100644
--- a/include/linux/isdn/capilli.h
+++ b/include/linux/isdn/capilli.h
@@ -79,7 +79,7 @@ int attach_capi_ctr(struct capi_ctr *);
 int detach_capi_ctr(struct capi_ctr *);
 
 void capi_ctr_ready(struct capi_ctr * card);
-void capi_ctr_reseted(struct capi_ctr * card);
+void capi_ctr_down(struct capi_ctr * card);
 void capi_ctr_suspend_output(struct capi_ctr * card);
 void capi_ctr_resume_output(struct capi_ctr * card);
 void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 883cd44ff76..1b2e1747df1 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -97,12 +97,14 @@ extern const char linux_proc_banner[];
 #define	KERN_INFO	"<6>"	/* informational			*/
 #define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
 
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
 /*
  * Annotation for a "continued" line of log printout (only done after a
  * line that had no enclosing \n). Only to be used by core/arch code
  * during early bootup (a continued line is not SMP-safe otherwise).
  */
-#define	KERN_CONT	""
+#define	KERN_CONT	"<c>"
 
 extern int console_printk[];
 
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index a3c984d780f..33a63f62d57 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -56,6 +56,7 @@ extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #define KT_ASCII	9
 #define KT_LOCK		10
 #define KT_SLOCK	12
+#define KT_DEAD2	13
 #define KT_BRL		14
 
 #define K(t,v)		(((t)<<8)|(v))
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 175e63f4a8c..7bc1440fc47 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -30,6 +30,10 @@ struct lguest_data
 	/* Wallclock time set by the Host. */
 	struct timespec time;
 
+	/* Interrupt pending set by the Host.  The Guest should do a hypercall
+	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+	int irq_pending;
+
 	/* Async hypercall ring.  Instead of directly making hypercalls, we can
 	 * place them in here for processing the next time the Host wants.
 	 * This batching can be quite efficient. */
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index a53407a4165..bfefbdf7498 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -57,7 +57,8 @@ enum lguest_req
 	LHREQ_INITIALIZE, /* + base, pfnlimit, start */
 	LHREQ_GETDMA, /* No longer used */
 	LHREQ_IRQ, /* + irq */
-	LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */
+	LHREQ_BREAK, /* No longer used */
+	LHREQ_EVENTFD, /* + address, fd. */
 };
 
 /* The alignment to use between consumer and producer parts of vring.
diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h
index 93150ecf3ea..5d10ae364b5 100644
--- a/include/linux/list_nulls.h
+++ b/include/linux/list_nulls.h
@@ -56,6 +56,18 @@ static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
 	return is_a_nulls(h->first);
 }
 
+static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
+					struct hlist_nulls_head *h)
+{
+	struct hlist_nulls_node *first = h->first;
+
+	n->next = first;
+	n->pprev = &h->first;
+	h->first = n;
+	if (!is_a_nulls(first))
+		first->pprev = &n->next;
+}
+
 static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 {
 	struct hlist_nulls_node *next = n->next;
@@ -65,6 +77,12 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 		next->pprev = pprev;
 }
 
+static inline void hlist_nulls_del(struct hlist_nulls_node *n)
+{
+	__hlist_nulls_del(n);
+	n->pprev = LIST_POISON2;
+}
+
 /**
  * hlist_nulls_for_each_entry	- iterate over list of given type
  * @tpos:	the type * to use as a loop cursor.
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
index 6b71d2dce50..41d1eeb9b3b 100644
--- a/include/linux/mISDNdsp.h
+++ b/include/linux/mISDNdsp.h
@@ -12,7 +12,8 @@ struct mISDN_dsp_element {
 	void	*(*new)(const char *arg);
 	void	(*free)(void *p);
 	void	(*process_tx)(void *p, unsigned char *data, int len);
-	void	(*process_rx)(void *p, unsigned char *data, int len);
+	void	(*process_rx)(void *p, unsigned char *data, int len,
+			unsigned int txlen);
 	int	num_args;
 	struct mISDN_dsp_element_arg
 		*args;
@@ -24,6 +25,7 @@ extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
 struct dsp_features {
 	int	hfc_id; /* unique id to identify the chip (or -1) */
 	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
+	int	hfc_conf; /* set if HFCmulti card supports conferences */
 	int	hfc_loops; /* set if card supports tone loops */
 	int	hfc_echocanhw; /* set if card supports echocancelation*/
 	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
index 97ffdc1d344..7f9831da847 100644
--- a/include/linux/mISDNhw.h
+++ b/include/linux/mISDNhw.h
@@ -89,11 +89,6 @@ struct dchannel {
 	void			(*phfunc) (struct dchannel *);
 	u_int			state;
 	void			*l1;
-	/* HW access */
-	u_char			(*read_reg) (void *, u_char);
-	void			(*write_reg) (void *, u_char, u_char);
-	void			(*read_fifo) (void *, u_char *, int);
-	void			(*write_fifo) (void *, u_char *, int);
 	void			*hw;
 	int			slot;	/* multiport card channel slot */
 	struct timer_list	timer;
@@ -151,11 +146,6 @@ struct bchannel {
 	u_long			Flags;
 	struct work_struct	workq;
 	u_int			state;
-	/* HW access */
-	u_char			(*read_reg) (void *, u_char);
-	void			(*write_reg) (void *, u_char, u_char);
-	void			(*read_fifo) (void *, u_char *, int);
-	void			(*write_fifo) (void *, u_char *, int);
 	void			*hw;
 	int			slot;	/* multiport card channel slot */
 	struct timer_list	timer;
@@ -185,7 +175,7 @@ extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
 extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
 extern void	recv_Dchannel(struct dchannel *);
 extern void	recv_Echannel(struct dchannel *, struct dchannel *);
-extern void	recv_Bchannel(struct bchannel *);
+extern void	recv_Bchannel(struct bchannel *, unsigned int id);
 extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
 extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
 extern void	confirm_Bsend(struct bchannel *bch);
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 5da3d95b27f..45100b39a7c 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -229,6 +229,7 @@
 #define OPTION_L2_PTP		2
 #define OPTION_L2_FIXEDTEI	3
 #define OPTION_L2_CLEANUP	4
+#define OPTION_L1_HOLD		5
 
 /* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
 #define MISDN_MAX_IDLEN		20
@@ -291,19 +292,19 @@ struct mISDN_devrename {
 
 /* MPH_INFORMATION_REQ payload */
 struct ph_info_ch {
-        __u32 protocol;
-        __u64 Flags;
+	__u32 protocol;
+	__u64 Flags;
 };
 
 struct ph_info_dch {
-        struct ph_info_ch ch;
-        __u16 state;
-        __u16 num_bch;
+	struct ph_info_ch ch;
+	__u16 state;
+	__u16 num_bch;
 };
 
 struct ph_info {
-        struct ph_info_dch dch;
-        struct ph_info_ch  bch[];
+	struct ph_info_dch dch;
+	struct ph_info_ch  bch[];
 };
 
 /* timer device ioctl */
@@ -317,6 +318,7 @@ struct ph_info {
 #define IMCTRLREQ	_IOR('I', 69, int)
 #define IMCLEAR_L2	_IOR('I', 70, int)
 #define IMSETDEVNAME	_IOR('I', 71, struct mISDN_devrename)
+#define IMHOLD_L1	_IOR('I', 72, int)
 
 static inline int
 test_channelmap(u_int nr, u_char *map)
@@ -362,7 +364,8 @@ clear_channelmap(u_int nr, u_char *map)
 #define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
 #define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
 #define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
-
+#define MISDN_CTRL_HFC_WD_INIT		0x4009
+#define MISDN_CTRL_HFC_WD_RESET		0x400A
 
 /* socket options */
 #define MISDN_TIME_STAMP		0x0001
diff --git a/include/linux/magic.h b/include/linux/magic.h
index 927138cf305..1923327b986 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -6,6 +6,8 @@
 #define AFS_SUPER_MAGIC                0x5346414F
 #define AUTOFS_SUPER_MAGIC	0x0187
 #define CODA_SUPER_MAGIC	0x73757245
+#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
+#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
 #define DEBUGFS_MAGIC          0x64626720
 #define SYSFS_MAGIC		0x62656572
 #define SECURITYFS_MAGIC	0x73636673
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644
index 00000000000..cfdf1df2875
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,356 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+static inline bool mdio_phy_id_is_c45(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
+}
+
+static inline __u16 mdio_phy_id_prtad(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+}
+
+static inline __u16 mdio_phy_id_devad(int phy_id)
+{
+	return phy_id & MDIO_PHY_ID_DEVAD;
+}
+
+#define MDIO_SUPPORTS_C22		1
+#define MDIO_SUPPORTS_C45		2
+
+#ifdef __KERNEL__ 
+
+/**
+ * struct mdio_if_info - Ethernet controller MDIO interface
+ * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
+ * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
+ *	non-zero unless @prtad = %MDIO_PRTAD_NONE.
+ * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
+ *	MII register access will be passed through with @devad =
+ *	%MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
+ *	commonly used clause 22 registers will be translated into
+ *	clause 45 registers.
+ * @dev: Net device structure
+ * @mdio_read: Register read function; returns value or negative error code
+ * @mdio_write: Register write function; returns 0 or negative error code
+ */
+struct mdio_if_info {
+	int prtad;
+	u32 __bitwise mmds;
+	unsigned mode_support;
+
+	struct net_device *dev;
+	int (*mdio_read)(struct net_device *dev, int prtad, int devad,
+			 u16 addr);
+	int (*mdio_write)(struct net_device *dev, int prtad, int devad,
+			  u16 addr, u16 val);
+};
+
+#define MDIO_PRTAD_NONE			(-1)
+#define MDIO_DEVAD_NONE			(-1)
+#define MDIO_EMULATE_C22		4
+
+struct ethtool_cmd;
+struct ethtool_pauseparam;
+extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
+extern int mdio_set_flag(const struct mdio_if_info *mdio,
+			 int prtad, int devad, u16 addr, int mask,
+			 bool sense);
+extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
+extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
+extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
+				      struct ethtool_cmd *ecmd,
+				      u32 npage_adv, u32 npage_lpa);
+extern void
+mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
+			      const struct ethtool_pauseparam *ecmd);
+
+/**
+ * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them.  Use
+ * mdio45_ethtool_gset_npage() to specify advertisement bits from next
+ * pages.
+ */
+static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
+				       struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
+}
+
+extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
+			  struct mii_ioctl_data *mii_data, int cmd);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 516d955ab8a..c377118884e 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -19,6 +19,13 @@
 	} while (0)
 
 /*
+ * data for the MMC controller
+ */
+struct tmio_mmc_data {
+	unsigned int		hclk;
+};
+
+/*
  * data for the NAND controller
  */
 struct tmio_nand_data {
diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h
new file mode 100644
index 00000000000..e11f4d9f1c2
--- /dev/null
+++ b/include/linux/mg_disk.h
@@ -0,0 +1,45 @@
+/*
+ *  include/linux/mg_disk.c
+ *
+ *  Private data for mflash platform driver
+ *
+ * (c) 2008 mGine Co.,LTD
+ * (c) 2008 unsik Kim <donari75@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __MG_DISK_H__
+#define __MG_DISK_H__
+
+/* name for platform device */
+#define MG_DEV_NAME "mg_disk"
+
+/* names of GPIO resource */
+#define MG_RST_PIN	"mg_rst"
+/* except MG_BOOT_DEV, reset-out pin should be assigned */
+#define MG_RSTOUT_PIN	"mg_rstout"
+
+/* device attribution */
+/* use mflash as boot device */
+#define MG_BOOT_DEV		(1 << 0)
+/* use mflash as storage device */
+#define MG_STORAGE_DEV		(1 << 1)
+/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
+#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
+
+/* private driver data */
+struct mg_drv_data {
+	/* disk resource */
+	u32 use_polling;
+
+	/* device attribution */
+	u32 dev_attr;
+
+	/* internally used */
+	void *host;
+};
+
+#endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index ad748588faf..359fba88027 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -240,6 +240,22 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock,
 }
 
 /**
+ * mii_advertise_flowctrl - get flow control advertisement flags
+ * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
+ */
+static inline u16 mii_advertise_flowctrl(int cap)
+{
+	u16 adv = 0;
+
+	if (cap & FLOW_CTRL_RX)
+		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	if (cap & FLOW_CTRL_TX)
+		adv ^= ADVERTISE_PAUSE_ASYM;
+
+	return adv;
+}
+
+/**
  * mii_resolve_flowctrl_fdx
  * @lcladv: value of MII ADVERTISE register
  * @rmtadv: value of MII LPA register
@@ -250,18 +266,12 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 {
 	u8 cap = 0;
 
-	if (lcladv & ADVERTISE_PAUSE_CAP) {
-		if (lcladv & ADVERTISE_PAUSE_ASYM) {
-			if (rmtadv & LPA_PAUSE_CAP)
-				cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
-			else if (rmtadv & LPA_PAUSE_ASYM)
-				cap = FLOW_CTRL_RX;
-		} else {
-			if (rmtadv & LPA_PAUSE_CAP)
-				cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
-		}
-	} else if (lcladv & ADVERTISE_PAUSE_ASYM) {
-		if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM))
+	if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
+		cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
+	} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
+		if (lcladv & ADVERTISE_PAUSE_CAP)
+			cap = FLOW_CTRL_RX;
+		else if (rmtadv & ADVERTISE_PAUSE_CAP)
 			cap = FLOW_CTRL_TX;
 	}
 
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 3aff8a6a389..ce7cc6c7bcb 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -210,6 +210,7 @@ struct mlx4_caps {
 	int			num_comp_vectors;
 	int			num_mpts;
 	int			num_mtt_segs;
+	int			mtts_per_seg;
 	int			fmr_reserved_mtts;
 	int			reserved_mtts;
 	int			reserved_mrws;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index bf8f11982da..9f29d86e5dc 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -165,6 +165,7 @@ enum {
 	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
 	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
 	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
+	MLX4_WQE_CTRL_STRONG_ORDER	= 1 << 7,
 };
 
 struct mlx4_wqe_ctrl_seg {
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index ea1bf5ba092..c7211ab6dd4 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -25,5 +25,7 @@
 
 #define SDIO_VENDOR_ID_MARVELL			0x02df
 #define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
+#define SDIO_DEVICE_ID_MARVELL_8688WLAN		0x9104
+#define SDIO_DEVICE_ID_MARVELL_8688BT		0x9105
 
 #endif
diff --git a/include/linux/module.h b/include/linux/module.h
index a8f2c0aa4c3..a7bc6e7b43a 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -77,6 +77,7 @@ search_extable(const struct exception_table_entry *first,
 void sort_extable(struct exception_table_entry *start,
 		  struct exception_table_entry *finish);
 void sort_main_extable(void);
+void trim_init_extable(struct module *m);
 
 #ifdef MODULE
 #define MODULE_GENERIC_TABLE(gtype,name)			\
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index a4f0b931846..6547c3cdbc4 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -36,9 +36,14 @@ typedef int (*param_set_fn)(const char *val, struct kernel_param *kp);
 /* Returns length written or -errno.  Buffer is 4k (ie. be short!) */
 typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
 
+/* Flag bits for kernel_param.flags */
+#define KPARAM_KMALLOCED	1
+#define KPARAM_ISBOOL		2
+
 struct kernel_param {
 	const char *name;
-	unsigned int perm;
+	u16 perm;
+	u16 flags;
 	param_set_fn set;
 	param_get_fn get;
 	union {
@@ -79,7 +84,7 @@ struct kparam_array
    parameters.  perm sets the visibility in sysfs: 000 means it's
    not there, read bits mean it's readable, write bits mean it's
    writable. */
-#define __module_param_call(prefix, name, set, get, arg, perm)		\
+#define __module_param_call(prefix, name, set, get, arg, isbool, perm)	\
 	/* Default value instead of permissions? */			\
 	static int __param_perm_check_##name __attribute__((unused)) =	\
 	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2))	\
@@ -88,10 +93,13 @@ struct kparam_array
 	static struct kernel_param __moduleparam_const __param_##name	\
 	__used								\
     __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
-	= { __param_str_##name, perm, set, get, { arg } }
+	= { __param_str_##name, perm, isbool ? KPARAM_ISBOOL : 0,	\
+	    set, get, { arg } }
 
 #define module_param_call(name, set, get, arg, perm)			      \
-	__module_param_call(MODULE_PARAM_PREFIX, name, set, get, arg, perm)
+	__module_param_call(MODULE_PARAM_PREFIX,			      \
+			    name, set, get, arg,			      \
+			    __same_type(*(arg), bool), perm)
 
 /* Helper functions: type is byte, short, ushort, int, uint, long,
    ulong, charp, bool or invbool, or XXX if you define param_get_XXX,
@@ -120,15 +128,16 @@ struct kparam_array
 #define core_param(name, var, type, perm)				\
 	param_check_##type(name, &(var));				\
 	__module_param_call("", name, param_set_##type, param_get_##type, \
-			    &var, perm)
+			    &var, __same_type(var, bool), perm)
 #endif /* !MODULE */
 
 /* Actually copy string: maxlen param is usually sizeof(string). */
 #define module_param_string(name, string, len, perm)			\
 	static const struct kparam_string __param_string_##name		\
 		= { len, string };					\
-	module_param_call(name, param_set_copystring, param_get_string,	\
-			  .str = &__param_string_##name, perm);		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    param_set_copystring, param_get_string,	\
+			    .str = &__param_string_##name, 0, perm);	\
 	__MODULE_PARM_TYPE(name, "string")
 
 /* Called on module insert or kernel boot */
@@ -186,21 +195,30 @@ extern int param_set_charp(const char *val, struct kernel_param *kp);
 extern int param_get_charp(char *buffer, struct kernel_param *kp);
 #define param_check_charp(name, p) __param_check(name, p, char *)
 
+/* For historical reasons "bool" parameters can be (unsigned) "int". */
 extern int param_set_bool(const char *val, struct kernel_param *kp);
 extern int param_get_bool(char *buffer, struct kernel_param *kp);
-#define param_check_bool(name, p) __param_check(name, p, int)
+#define param_check_bool(name, p)					\
+	static inline void __check_##name(void)				\
+	{								\
+		BUILD_BUG_ON(!__same_type(*(p), bool) &&		\
+			     !__same_type(*(p), unsigned int) &&	\
+			     !__same_type(*(p), int));			\
+	}
 
 extern int param_set_invbool(const char *val, struct kernel_param *kp);
 extern int param_get_invbool(char *buffer, struct kernel_param *kp);
-#define param_check_invbool(name, p) __param_check(name, p, int)
+#define param_check_invbool(name, p) __param_check(name, p, bool)
 
 /* Comma-separated array: *nump is set to number they actually specified. */
 #define module_param_array_named(name, array, type, nump, perm)		\
 	static const struct kparam_array __param_arr_##name		\
 	= { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type,\
 	    sizeof(array[0]), array };					\
-	module_param_call(name, param_array_set, param_array_get, 	\
-			  .arr = &__param_arr_##name, perm);		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    param_array_set, param_array_get,		\
+			    .arr = &__param_arr_##name,			\
+			    __same_type(array[0], bool), perm);		\
 	__MODULE_PARM_TYPE(name, "array of " #type)
 
 #define module_param_array(name, type, nump, perm)		\
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 51f55f903af..5d527536486 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -30,7 +30,7 @@ struct mnt_namespace;
 #define MNT_STRICTATIME 0x80
 
 #define MNT_SHRINKABLE	0x100
-#define MNT_IMBALANCED_WRITE_COUNT	0x200 /* just for debugging */
+#define MNT_WRITE_HOLD	0x200
 
 #define MNT_SHARED	0x1000	/* if the vfsmount is a shared mount */
 #define MNT_UNBINDABLE	0x2000	/* if the vfsmount is a unbindable mount */
@@ -65,13 +65,22 @@ struct vfsmount {
 	int mnt_expiry_mark;		/* true if marked for expiry */
 	int mnt_pinned;
 	int mnt_ghosts;
-	/*
-	 * This value is not stable unless all of the mnt_writers[] spinlocks
-	 * are held, and all mnt_writer[]s on this mount have 0 as their ->count
-	 */
-	atomic_t __mnt_writers;
+#ifdef CONFIG_SMP
+	int *mnt_writers;
+#else
+	int mnt_writers;
+#endif
 };
 
+static inline int *get_mnt_writers_ptr(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	return mnt->mnt_writers;
+#else
+	return &mnt->mnt_writers;
+#endif
+}
+
 static inline struct vfsmount *mntget(struct vfsmount *mnt)
 {
 	if (mnt)
@@ -79,7 +88,11 @@ static inline struct vfsmount *mntget(struct vfsmount *mnt)
 	return mnt;
 }
 
+struct file; /* forward dec */
+
 extern int mnt_want_write(struct vfsmount *mnt);
+extern int mnt_want_write_file(struct file *file);
+extern int mnt_clone_write(struct vfsmount *mnt);
 extern void mnt_drop_write(struct vfsmount *mnt);
 extern void mntput_no_expire(struct vfsmount *mnt);
 extern void mnt_pin(struct vfsmount *mnt);
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 518098fe63a..d870ae2faed 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -18,6 +18,7 @@ enum { MAX_NESTED_LINKS = 8 };
 struct nameidata {
 	struct path	path;
 	struct qstr	last;
+	struct path	root;
 	unsigned int	flags;
 	int		last_type;
 	unsigned	depth;
@@ -77,8 +78,8 @@ extern void release_open_intent(struct nameidata *);
 extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
 extern struct dentry *lookup_one_noperm(const char *, struct dentry *);
 
-extern int follow_down(struct vfsmount **, struct dentry **);
-extern int follow_up(struct vfsmount **, struct dentry **);
+extern int follow_down(struct path *);
+extern int follow_up(struct path *);
 
 extern struct dentry *lock_rename(struct dentry *, struct dentry *);
 extern void unlock_rename(struct dentry *, struct dentry *);
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
index 0e2e100c44a..3ceb0cc1bc7 100644
--- a/include/linux/net_dropmon.h
+++ b/include/linux/net_dropmon.h
@@ -3,12 +3,20 @@
 
 #include <linux/types.h>
 #include <linux/netlink.h>
+#include <linux/types.h>
 
 struct net_dm_drop_point {
 	__u8 pc[8];
 	__u32 count;
 };
 
+#define is_drop_point_hw(x) do {\
+	int ____i, ____j;\
+	for (____i = 0; ____i < 8; i ____i++)\
+		____j |= x[____i];\
+	____j;\
+} while (0)
+
 #define NET_DM_CFG_VERSION  0
 #define NET_DM_CFG_ALERT_COUNT  1
 #define NET_DM_CFG_ALERT_DELAY 2
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5a96a1a406e..9ea8d6dfe54 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -39,9 +39,11 @@
 
 #include <linux/device.h>
 #include <linux/percpu.h>
+#include <linux/rculist.h>
 #include <linux/dmaengine.h>
 #include <linux/workqueue.h>
 
+#include <linux/ethtool.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -49,7 +51,6 @@
 #endif
 
 struct vlan_group;
-struct ethtool_ops;
 struct netpoll_info;
 /* 802.11 specific */
 struct wireless_dev;
@@ -210,6 +211,19 @@ struct dev_addr_list
 #define dmi_users	da_users
 #define dmi_gusers	da_gusers
 
+struct netdev_hw_addr {
+	struct list_head	list;
+	unsigned char		addr[MAX_ADDR_LEN];
+	unsigned char		type;
+#define NETDEV_HW_ADDR_T_LAN		1
+#define NETDEV_HW_ADDR_T_SAN		2
+#define NETDEV_HW_ADDR_T_SLAVE		3
+#define NETDEV_HW_ADDR_T_UNICAST	4
+	int			refcount;
+	bool			synced;
+	struct rcu_head		rcu_head;
+};
+
 struct hh_cache
 {
 	struct hh_cache *hh_next;	/* Next entry			     */
@@ -447,12 +461,25 @@ enum netdev_queue_state_t
 };
 
 struct netdev_queue {
+/*
+ * read mostly part
+ */
 	struct net_device	*dev;
 	struct Qdisc		*qdisc;
 	unsigned long		state;
-	spinlock_t		_xmit_lock;
-	int			xmit_lock_owner;
 	struct Qdisc		*qdisc_sleeping;
+/*
+ * write mostly part
+ */
+	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
+	int			xmit_lock_owner;
+	/*
+	 * please use this field instead of dev->trans_start
+	 */
+	unsigned long		trans_start;
+	unsigned long		tx_bytes;
+	unsigned long		tx_packets;
+	unsigned long		tx_dropped;
 } ____cacheline_aligned_in_smp;
 
 
@@ -670,7 +697,9 @@ struct net_device
 #define NETIF_F_GRO		16384	/* Generic receive offload */
 #define NETIF_F_LRO		32768	/* large receive offload */
 
+/* the GSO_MASK reserves bits 16 through 23 */
 #define NETIF_F_FCOE_CRC	(1 << 24) /* FCoE CRC32 */
+#define NETIF_F_SCTP_CSUM	(1 << 25) /* SCTP checksum offload */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -747,10 +776,11 @@ struct net_device
 	unsigned char		addr_len;	/* hardware address length	*/
 	unsigned short          dev_id;		/* for shared network cards */
 
-	spinlock_t		addr_list_lock;
-	struct dev_addr_list	*uc_list;	/* Secondary unicast mac addresses */
+	struct list_head	uc_list;	/* Secondary unicast mac
+						   addresses */
 	int			uc_count;	/* Number of installed ucasts	*/
 	int			uc_promisc;
+	spinlock_t		addr_list_lock;
 	struct dev_addr_list	*mc_list;	/* Multicast mac addresses	*/
 	int			mc_count;	/* Number of installed mcasts	*/
 	unsigned int		promiscuity;
@@ -776,8 +806,11 @@ struct net_device
  */
 	unsigned long		last_rx;	/* Time of last Rx	*/
 	/* Interface address info used in eth_type_trans() */
-	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast
-							   because most packets are unicast) */
+	unsigned char		*dev_addr;	/* hw address, (before bcast
+						   because most packets are
+						   unicast) */
+
+	struct list_head	dev_addr_list; /* list of device hw addresses */
 
 	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
 
@@ -797,6 +830,11 @@ struct net_device
  * One part is mostly used on xmit path (device)
  */
 	/* These may be needed for future network-power-down code. */
+
+	/*
+	 * trans_start here is expensive for high speed devices on SMP,
+	 * please use netdev_queue->trans_start instead.
+	 */
 	unsigned long		trans_start;	/* Time (in jiffies) of last Tx	*/
 
 	int			watchdog_timeo; /* used by dev_watchdog() */
@@ -867,49 +905,10 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
-
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	struct {
-		int			(*init)(struct net_device *dev);
-		void			(*uninit)(struct net_device *dev);
-		int			(*open)(struct net_device *dev);
-		int			(*stop)(struct net_device *dev);
-		int			(*hard_start_xmit) (struct sk_buff *skb,
-							    struct net_device *dev);
-		u16			(*select_queue)(struct net_device *dev,
-							struct sk_buff *skb);
-		void			(*change_rx_flags)(struct net_device *dev,
-							   int flags);
-		void			(*set_rx_mode)(struct net_device *dev);
-		void			(*set_multicast_list)(struct net_device *dev);
-		int			(*set_mac_address)(struct net_device *dev,
-							   void *addr);
-		int			(*validate_addr)(struct net_device *dev);
-		int			(*do_ioctl)(struct net_device *dev,
-						    struct ifreq *ifr, int cmd);
-		int			(*set_config)(struct net_device *dev,
-						      struct ifmap *map);
-		int			(*change_mtu)(struct net_device *dev, int new_mtu);
-		int			(*neigh_setup)(struct net_device *dev,
-						       struct neigh_parms *);
-		void			(*tx_timeout) (struct net_device *dev);
-		struct net_device_stats* (*get_stats)(struct net_device *dev);
-		void			(*vlan_rx_register)(struct net_device *dev,
-							    struct vlan_group *grp);
-		void			(*vlan_rx_add_vid)(struct net_device *dev,
-							   unsigned short vid);
-		void			(*vlan_rx_kill_vid)(struct net_device *dev,
-							    unsigned short vid);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-		void                    (*poll_controller)(struct net_device *dev);
-#endif
-	};
-#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
 #define	NETDEV_ALIGN		32
-#define	NETDEV_ALIGN_CONST	(NETDEV_ALIGN - 1)
 
 static inline
 struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
@@ -980,9 +979,7 @@ static inline bool netdev_uses_trailer_tags(struct net_device *dev)
  */
 static inline void *netdev_priv(const struct net_device *dev)
 {
-	return (char *)dev + ((sizeof(struct net_device)
-			       + NETDEV_ALIGN_CONST)
-			      & ~NETDEV_ALIGN_CONST);
+	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
 }
 
 /* Set the sysfs physical device reference for the network logical device
@@ -1012,6 +1009,12 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
 void netif_napi_del(struct napi_struct *napi);
 
 struct napi_gro_cb {
+	/* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */
+	void *frag0;
+
+	/* Length of frag0. */
+	unsigned int frag0_len;
+
 	/* This indicates where we are processing relative to skb->data. */
 	int data_offset;
 
@@ -1047,14 +1050,6 @@ struct packet_type {
 	struct list_head	list;
 };
 
-struct napi_gro_fraginfo {
-	skb_frag_t frags[MAX_SKB_FRAGS];
-	unsigned int nr_frags;
-	unsigned int ip_summed;
-	unsigned int len;
-	__wsum csum;
-};
-
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
 
@@ -1119,9 +1114,9 @@ extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
 #endif
-extern void	      *skb_gro_header(struct sk_buff *skb, unsigned int hlen);
 extern int	       skb_gro_receive(struct sk_buff **head,
 				       struct sk_buff *skb);
+extern void	       skb_gro_reset_offset(struct sk_buff *skb);
 
 static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
 {
@@ -1138,16 +1133,34 @@ static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
 	NAPI_GRO_CB(skb)->data_offset += len;
 }
 
-static inline void skb_gro_reset_offset(struct sk_buff *skb)
+static inline void *skb_gro_header_fast(struct sk_buff *skb,
+					unsigned int offset)
 {
-	NAPI_GRO_CB(skb)->data_offset = 0;
+	return NAPI_GRO_CB(skb)->frag0 + offset;
+}
+
+static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen)
+{
+	return NAPI_GRO_CB(skb)->frag0_len < hlen;
+}
+
+static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
+					unsigned int offset)
+{
+	NAPI_GRO_CB(skb)->frag0 = NULL;
+	NAPI_GRO_CB(skb)->frag0_len = 0;
+	return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
 }
 
 static inline void *skb_gro_mac_header(struct sk_buff *skb)
 {
-	return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) :
-	       page_address(skb_shinfo(skb)->frags[0].page) +
-	       skb_shinfo(skb)->frags[0].page_offset;
+	return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb);
+}
+
+static inline void *skb_gro_network_header(struct sk_buff *skb)
+{
+	return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) +
+	       skb_network_offset(skb);
 }
 
 static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
@@ -1442,12 +1455,18 @@ extern int		napi_gro_receive(struct napi_struct *napi,
 					 struct sk_buff *skb);
 extern void		napi_reuse_skb(struct napi_struct *napi,
 				       struct sk_buff *skb);
-extern struct sk_buff *	napi_fraginfo_skb(struct napi_struct *napi,
-					  struct napi_gro_fraginfo *info);
+extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
 extern int		napi_frags_finish(struct napi_struct *napi,
 					  struct sk_buff *skb, int ret);
-extern int		napi_gro_frags(struct napi_struct *napi,
-				       struct napi_gro_fraginfo *info);
+extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
+extern int		napi_gro_frags(struct napi_struct *napi);
+
+static inline void napi_free_frags(struct napi_struct *napi)
+{
+	kfree_skb(napi->skb);
+	napi->skb = NULL;
+}
+
 extern void		netif_nit_deliver(struct sk_buff *skb);
 extern int		dev_valid_name(const char *name);
 extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
@@ -1514,6 +1533,8 @@ static inline int netif_carrier_ok(const struct net_device *dev)
 	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
 }
 
+extern unsigned long dev_trans_start(struct net_device *dev);
+
 extern void __netdev_watchdog_up(struct net_device *dev);
 
 extern void netif_carrier_on(struct net_device *dev);
@@ -1671,6 +1692,12 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
 	spin_unlock_bh(&txq->_xmit_lock);
 }
 
+static inline void txq_trans_update(struct netdev_queue *txq)
+{
+	if (txq->xmit_lock_owner != -1)
+		txq->trans_start = jiffies;
+}
+
 /**
  *	netif_tx_lock - grab network device transmit lock
  *	@dev: network device
@@ -1778,6 +1805,13 @@ static inline void netif_addr_unlock_bh(struct net_device *dev)
 	spin_unlock_bh(&dev->addr_list_lock);
 }
 
+/*
+ * dev_addr_list walker. Should be used only for read access. Call with
+ * rcu_read_lock held.
+ */
+#define for_each_dev_addr(dev, ha) \
+		list_for_each_entry_rcu(ha, &dev->dev_addr_list, list)
+
 /* These functions live elsewhere (drivers/net/net_init.c, but related) */
 
 extern void		ether_setup(struct net_device *dev);
@@ -1790,11 +1824,24 @@ extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	alloc_netdev_mq(sizeof_priv, name, setup, 1)
 extern int		register_netdev(struct net_device *dev);
 extern void		unregister_netdev(struct net_device *dev);
+
+/* Functions used for device addresses handling */
+extern int dev_addr_add(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_del(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_add_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+extern int dev_addr_del_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+
 /* Functions used for secondary unicast and multicast support */
 extern void		dev_set_rx_mode(struct net_device *dev);
 extern void		__dev_set_rx_mode(struct net_device *dev);
-extern int		dev_unicast_delete(struct net_device *dev, void *addr, int alen);
-extern int		dev_unicast_add(struct net_device *dev, void *addr, int alen);
+extern int		dev_unicast_delete(struct net_device *dev, void *addr);
+extern int		dev_unicast_add(struct net_device *dev, void *addr);
 extern int		dev_unicast_sync(struct net_device *to, struct net_device *from);
 extern void		dev_unicast_unsync(struct net_device *to, struct net_device *from);
 extern int 		dev_mc_delete(struct net_device *dev, void *addr, int alen, int all);
@@ -1856,15 +1903,14 @@ static inline int net_gso_ok(int features, int gso_type)
 
 static inline int skb_gso_ok(struct sk_buff *skb, int features)
 {
-	return net_gso_ok(features, skb_shinfo(skb)->gso_type);
+	return net_gso_ok(features, skb_shinfo(skb)->gso_type) &&
+	       (!skb_has_frags(skb) || (features & NETIF_F_FRAGLIST));
 }
 
 static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
 {
 	return skb_is_gso(skb) &&
 	       (!skb_gso_ok(skb, dev->features) ||
-	        (skb_shinfo(skb)->frag_list &&
-	         !(dev->features & NETIF_F_FRAGLIST)) ||
 		unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
 }
 
@@ -1874,6 +1920,16 @@ static inline void netif_set_gso_max_size(struct net_device *dev,
 	dev->gso_max_size = size;
 }
 
+static inline void skb_bond_set_mac_by_master(struct sk_buff *skb,
+					      struct net_device *master)
+{
+	if (skb->pkt_type == PACKET_HOST) {
+		u16 *dest = (u16 *) eth_hdr(skb)->h_dest;
+
+		memcpy(dest, master->dev_addr, ETH_ALEN);
+	}
+}
+
 /* On bonding slaves other than the currently active slave, suppress
  * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and
  * ARP on active-backup slaves with arp_validate enabled.
@@ -1887,6 +1943,14 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 		if (master->priv_flags & IFF_MASTER_ARPMON)
 			dev->last_rx = jiffies;
 
+		if ((master->priv_flags & IFF_MASTER_ALB) && master->br_port) {
+			/* Do address unmangle. The local destination address
+			 * will be always the one master has. Provides the right
+			 * functionality in a bridge.
+			 */
+			skb_bond_set_mac_by_master(skb, master);
+		}
+
 		if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
 			if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
 			    skb->protocol == __cpu_to_be16(ETH_P_ARP))
@@ -1908,6 +1972,28 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 }
 
 extern struct pernet_operations __net_initdata loopback_net_ops;
+
+static inline int dev_ethtool_get_settings(struct net_device *dev,
+					   struct ethtool_cmd *cmd)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+		return -EOPNOTSUPP;
+	return dev->ethtool_ops->get_settings(dev, cmd);
+}
+
+static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum)
+		return 0;
+	return dev->ethtool_ops->get_rx_csum(dev);
+}
+
+static inline u32 dev_ethtool_get_flags(struct net_device *dev)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_flags)
+		return 0;
+	return dev->ethtool_ops->get_flags(dev);
+}
 #endif /* __KERNEL__ */
 
-#endif	/* _LINUX_DEV_H */
+#endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index af9d2fb9721..2aea50399c0 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -33,6 +33,7 @@ header-y += xt_limit.h
 header-y += xt_mac.h
 header-y += xt_mark.h
 header-y += xt_multiport.h
+header-y += xt_osf.h
 header-y += xt_owner.h
 header-y += xt_pkttype.h
 header-y += xt_quota.h
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index 885cbe28226..a8248ee422b 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -75,75 +75,6 @@ enum ip_conntrack_status {
 	IPS_FIXED_TIMEOUT = (1 << IPS_FIXED_TIMEOUT_BIT),
 };
 
-/* Connection tracking event bits */
-enum ip_conntrack_events
-{
-	/* New conntrack */
-	IPCT_NEW_BIT = 0,
-	IPCT_NEW = (1 << IPCT_NEW_BIT),
-
-	/* Expected connection */
-	IPCT_RELATED_BIT = 1,
-	IPCT_RELATED = (1 << IPCT_RELATED_BIT),
-
-	/* Destroyed conntrack */
-	IPCT_DESTROY_BIT = 2,
-	IPCT_DESTROY = (1 << IPCT_DESTROY_BIT),
-
-	/* Timer has been refreshed */
-	IPCT_REFRESH_BIT = 3,
-	IPCT_REFRESH = (1 << IPCT_REFRESH_BIT),
-
-	/* Status has changed */
-	IPCT_STATUS_BIT = 4,
-	IPCT_STATUS = (1 << IPCT_STATUS_BIT),
-
-	/* Update of protocol info */
-	IPCT_PROTOINFO_BIT = 5,
-	IPCT_PROTOINFO = (1 << IPCT_PROTOINFO_BIT),
-
-	/* Volatile protocol info */
-	IPCT_PROTOINFO_VOLATILE_BIT = 6,
-	IPCT_PROTOINFO_VOLATILE = (1 << IPCT_PROTOINFO_VOLATILE_BIT),
-
-	/* New helper for conntrack */
-	IPCT_HELPER_BIT = 7,
-	IPCT_HELPER = (1 << IPCT_HELPER_BIT),
-
-	/* Update of helper info */
-	IPCT_HELPINFO_BIT = 8,
-	IPCT_HELPINFO = (1 << IPCT_HELPINFO_BIT),
-
-	/* Volatile helper info */
-	IPCT_HELPINFO_VOLATILE_BIT = 9,
-	IPCT_HELPINFO_VOLATILE = (1 << IPCT_HELPINFO_VOLATILE_BIT),
-
-	/* NAT info */
-	IPCT_NATINFO_BIT = 10,
-	IPCT_NATINFO = (1 << IPCT_NATINFO_BIT),
-
-	/* Counter highest bit has been set, unused */
-	IPCT_COUNTER_FILLING_BIT = 11,
-	IPCT_COUNTER_FILLING = (1 << IPCT_COUNTER_FILLING_BIT),
-
-	/* Mark is set */
-	IPCT_MARK_BIT = 12,
-	IPCT_MARK = (1 << IPCT_MARK_BIT),
-
-	/* NAT sequence adjustment */
-	IPCT_NATSEQADJ_BIT = 13,
-	IPCT_NATSEQADJ = (1 << IPCT_NATSEQADJ_BIT),
-
-	/* Secmark is set */
-	IPCT_SECMARK_BIT = 14,
-	IPCT_SECMARK = (1 << IPCT_SECMARK_BIT),
-};
-
-enum ip_conntrack_expect_events {
-	IPEXP_NEW_BIT = 0,
-	IPEXP_NEW = (1 << IPEXP_NEW_BIT),
-};
-
 #ifdef __KERNEL__
 struct ip_conntrack_stat
 {
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index b2f384d4261..4352feed237 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -15,7 +15,8 @@ enum tcp_conntrack {
 	TCP_CONNTRACK_LAST_ACK,
 	TCP_CONNTRACK_TIME_WAIT,
 	TCP_CONNTRACK_CLOSE,
-	TCP_CONNTRACK_LISTEN,
+	TCP_CONNTRACK_LISTEN,	/* obsolete */
+#define TCP_CONNTRACK_SYN_SENT2	TCP_CONNTRACK_LISTEN
 	TCP_CONNTRACK_MAX,
 	TCP_CONNTRACK_IGNORE
 };
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index c600083cbdf..bff4d5741d9 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -46,7 +46,8 @@ struct nfgenmsg {
 #define NFNL_SUBSYS_CTNETLINK_EXP	2
 #define NFNL_SUBSYS_QUEUE		3
 #define NFNL_SUBSYS_ULOG		4
-#define NFNL_SUBSYS_COUNT		5
+#define NFNL_SUBSYS_OSF			5
+#define NFNL_SUBSYS_COUNT		6
 
 #ifdef __KERNEL__
 
@@ -75,7 +76,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
 
 extern int nfnetlink_has_listeners(unsigned int group);
 extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, 
-			  int echo);
+			  int echo, gfp_t flags);
 extern void nfnetlink_set_err(u32 pid, u32 group, int error);
 extern int nfnetlink_unicast(struct sk_buff *skb, u_int32_t pid, int flags);
 
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
index 1a865e48b8e..ed4ef8d0b11 100644
--- a/include/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -101,6 +101,7 @@ enum ctattr_protoinfo_dccp {
 	CTA_PROTOINFO_DCCP_UNSPEC,
 	CTA_PROTOINFO_DCCP_STATE,
 	CTA_PROTOINFO_DCCP_ROLE,
+	CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ,
 	__CTA_PROTOINFO_DCCP_MAX,
 };
 #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index c9efe039dc5..1030b759389 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -184,9 +184,10 @@ struct xt_counters_info
  * @matchinfo:	per-match data
  * @fragoff:	packet is a fragment, this is the data offset
  * @thoff:	position of transport header relative to skb->data
- * @hotdrop:	drop packet if we had inspection problems
+ * @hook:	hook number given packet came from
  * @family:	Actual NFPROTO_* through which the function is invoked
  * 		(helpful when match->family == NFPROTO_UNSPEC)
+ * @hotdrop:	drop packet if we had inspection problems
  */
 struct xt_match_param {
 	const struct net_device *in, *out;
@@ -194,8 +195,9 @@ struct xt_match_param {
 	const void *matchinfo;
 	int fragoff;
 	unsigned int thoff;
-	bool *hotdrop;
+	unsigned int hooknum;
 	u_int8_t family;
+	bool *hotdrop;
 };
 
 /**
diff --git a/include/linux/netfilter/xt_NFQUEUE.h b/include/linux/netfilter/xt_NFQUEUE.h
index 982a89f7827..2584f4a777d 100644
--- a/include/linux/netfilter/xt_NFQUEUE.h
+++ b/include/linux/netfilter/xt_NFQUEUE.h
@@ -15,4 +15,9 @@ struct xt_NFQ_info {
 	__u16 queuenum;
 };
 
+struct xt_NFQ_info_v1 {
+	__u16 queuenum;
+	__u16 queues_total;
+};
+
 #endif /* _XT_NFQ_TARGET_H */
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
new file mode 100644
index 00000000000..fd2272e0959
--- /dev/null
+++ b/include/linux/netfilter/xt_osf.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2003+ Evgeniy Polyakov <johnpol@2ka.mxt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _XT_OSF_H
+#define _XT_OSF_H
+
+#define MAXGENRELEN		32
+
+#define XT_OSF_GENRE		(1<<0)
+#define	XT_OSF_TTL		(1<<1)
+#define XT_OSF_LOG		(1<<2)
+#define XT_OSF_INVERT		(1<<3)
+
+#define XT_OSF_LOGLEVEL_ALL	0	/* log all matched fingerprints */
+#define XT_OSF_LOGLEVEL_FIRST	1	/* log only the first matced fingerprint */
+#define XT_OSF_LOGLEVEL_ALL_KNOWN	2 /* do not log unknown packets */
+
+#define XT_OSF_TTL_TRUE		0	/* True ip and fingerprint TTL comparison */
+#define XT_OSF_TTL_LESS		1	/* Check if ip TTL is less than fingerprint one */
+#define XT_OSF_TTL_NOCHECK	2	/* Do not compare ip and fingerprint TTL at all */
+
+struct xt_osf_info {
+	char			genre[MAXGENRELEN];
+	__u32			len;
+	__u32			flags;
+	__u32			loglevel;
+	__u32			ttl;
+};
+
+/*
+ * Wildcard MSS (kind of).
+ * It is used to implement a state machine for the different wildcard values
+ * of the MSS and window sizes.
+ */
+struct xt_osf_wc {
+	__u32			wc;
+	__u32			val;
+};
+
+/*
+ * This struct represents IANA options
+ * http://www.iana.org/assignments/tcp-parameters
+ */
+struct xt_osf_opt {
+	__u16			kind, length;
+	struct xt_osf_wc	wc;
+};
+
+struct xt_osf_user_finger {
+	struct xt_osf_wc	wss;
+
+	__u8			ttl, df;
+	__u16			ss, mss;
+	__u16			opt_num;
+
+	char			genre[MAXGENRELEN];
+	char			version[MAXGENRELEN];
+	char			subtype[MAXGENRELEN];
+
+	/* MAX_IPOPTLEN is maximum if all options are NOPs or EOLs */
+	struct xt_osf_opt	opt[MAX_IPOPTLEN];
+};
+
+struct xt_osf_nlmsg {
+	struct xt_osf_user_finger	f;
+	struct iphdr		ip;
+	struct tcphdr		tcp;
+};
+
+/* Defines for IANA option kinds */
+
+enum iana_options {
+	OSFOPT_EOL = 0,		/* End of options */
+	OSFOPT_NOP, 		/* NOP */
+	OSFOPT_MSS, 		/* Maximum segment size */
+	OSFOPT_WSO, 		/* Window scale option */
+	OSFOPT_SACKP,		/* SACK permitted */
+	OSFOPT_SACK,		/* SACK */
+	OSFOPT_ECHO,
+	OSFOPT_ECHOREPLY,
+	OSFOPT_TS,		/* Timestamp option */
+	OSFOPT_POCP,		/* Partial Order Connection Permitted */
+	OSFOPT_POSP,		/* Partial Order Service Profile */
+
+	/* Others are not used in the current OSF */
+	OSFOPT_EMPTY = 255,
+};
+
+/*
+ * Initial window size option state machine: multiple of mss, mtu or
+ * plain numeric value. Can also be made as plain numeric value which
+ * is not a multiple of specified value.
+ */
+enum xt_osf_window_size_options {
+	OSF_WSS_PLAIN	= 0,
+	OSF_WSS_MSS,
+	OSF_WSS_MTU,
+	OSF_WSS_MODULO,
+	OSF_WSS_MAX,
+};
+
+/*
+ * Add/remove fingerprint from the kernel.
+ */
+enum xt_osf_msg_types {
+	OSF_MSG_ADD,
+	OSF_MSG_REMOVE,
+	OSF_MSG_MAX,
+};
+
+enum xt_osf_attr_type {
+	OSF_ATTR_UNSPEC,
+	OSF_ATTR_FINGER,
+	OSF_ATTR_MAX,
+};
+
+#endif				/* _XT_OSF_H */
diff --git a/include/linux/netfilter/xt_socket.h b/include/linux/netfilter/xt_socket.h
new file mode 100644
index 00000000000..6f475b8ff34
--- /dev/null
+++ b/include/linux/netfilter/xt_socket.h
@@ -0,0 +1,12 @@
+#ifndef _XT_SOCKET_H
+#define _XT_SOCKET_H
+
+enum {
+	XT_SOCKET_TRANSPARENT = 1 << 0,
+};
+
+struct xt_socket_mtinfo1 {
+	__u8 flags;
+};
+
+#endif /* _XT_SOCKET_H */
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
index bcd0201589f..a6d9ef2bb34 100644
--- a/include/linux/nfsd/export.h
+++ b/include/linux/nfsd/export.h
@@ -125,11 +125,9 @@ void			nfsd_export_flush(void);
 void			exp_readlock(void);
 void			exp_readunlock(void);
 struct svc_export *	rqst_exp_get_by_name(struct svc_rqst *,
-					     struct vfsmount *,
-					     struct dentry *);
+					     struct path *);
 struct svc_export *	rqst_exp_parent(struct svc_rqst *,
-					struct vfsmount *mnt,
-					struct dentry *dentry);
+					struct path *);
 int			exp_rootfh(struct auth_domain *, 
 					char *path, struct knfsd_fh *, int maxsize);
 __be32			exp_pseudoroot(struct svc_rqst *, struct svc_fh *);
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index cbe8ce3bf48..dbea93b694e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -7,7 +7,7 @@
  * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
  * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
  * Copyright 2008 Michael Buesch <mb@bu3sch.de>
- * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  *
@@ -25,6 +25,8 @@
  *
  */
 
+#include <linux/types.h>
+
 /**
  * DOC: Station handling
  *
@@ -46,8 +48,10 @@
  *	to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -75,8 +79,8 @@
  * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
  *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
- *	attributes.
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ *	and %NL80211_ATTR_KEY_SEQ attributes.
  * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
  *	or %NL80211_ATTR_MAC.
  *
@@ -166,6 +170,22 @@
  * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
  * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
  * 	to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * 	has been found while world roaming thus enabling active scan or
+ * 	any mode of operation that initiates TX (beacons) on a channel
+ * 	where we would not have been able to do either before. As an example
+ * 	if you are world roaming (regulatory domain set to world or if your
+ * 	driver is using a custom world roaming regulatory domain) and while
+ * 	doing a passive scan on the 5 GHz band you find an AP there (if not
+ * 	on a DFS channel) you will now be able to actively scan for that AP
+ * 	or use AP mode on your card on that same channel. Note that this will
+ * 	never be used for channels 1-11 on the 2 GHz band as they are always
+ * 	enabled world wide. This beacon hint is only sent if your device had
+ * 	either disabled active scanning or beaconing on a channel. We send to
+ * 	userspace the wiphy on which we removed a restriction from
+ * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * 	the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *	This command is used both as a command (request to authenticate) and
@@ -185,8 +205,12 @@
  *	frame, i.e., it was for the local STA and was received in correct
  *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
  *	MLME SAP interface (kernel providing MLME, userspace SME). The
- *	included NL80211_ATTR_FRAME attribute contains the management frame
- *	(including both the header and frame body, but not FCS).
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS). This event is
+ *	also used to indicate if the authentication attempt timed out. In that
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ *	pending authentication timed out).
  * @NL80211_CMD_ASSOCIATE: association request and notification; like
  *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
  *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
@@ -199,6 +223,25 @@
  *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
  *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
  *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *	FREQ attribute (for the initial frequency if no peer can be found)
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *	should be fixed rather than automatically determined. Can only be
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ
+ *	may be rejected. Another optional parameter is the beacon interval,
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ *	given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *	determined by the network interface.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -260,6 +303,13 @@ enum nl80211_commands {
 	NL80211_CMD_DEAUTHENTICATE,
 	NL80211_CMD_DISASSOCIATE,
 
+	NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+	NL80211_CMD_REG_BEACON_HINT,
+
+	NL80211_CMD_JOIN_IBSS,
+	NL80211_CMD_LEAVE_IBSS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -278,6 +328,7 @@ enum nl80211_commands {
 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -296,6 +347,18 @@ enum nl80211_commands {
  *	NL80211_CHAN_HT20 = HT20 only
  *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
  *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *	less than or equal to the RTS threshold; allowed range: 1..255;
+ *	dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *	greater than the RTS threshold; allowed range: 1..255;
+ *	dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *	length in octets for frames; allowed range: 256..8000, disable
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *	larger than or equal to this use RTS/CTS handshake); allowed range:
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -319,7 +382,7 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
  * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- *	&enum nl80211_sta_flags.
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
  * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
  *	IEEE 802.11 7.3.1.6 (u16).
  * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
@@ -380,6 +443,8 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
  *	a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ *	that can be added to a scan request
  *
  * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
  * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -408,6 +473,44 @@ enum nl80211_commands {
  * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
  *	%NL80211_CMD_DISASSOCIATE, u16
  *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ *	a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _before_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _after_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *	cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *	for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ *	used for the association (&enum nl80211_mfp, represented as a u32);
+ *	this attribute can be used
+ *	with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ *	&struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ *	request, the driver will assume that the port is unauthorized until
+ *	authorized by user space. Otherwise, port is marked authorized by
+ *	default in station mode.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -492,6 +595,30 @@ enum nl80211_attrs {
 	NL80211_ATTR_AUTH_TYPE,
 	NL80211_ATTR_REASON_CODE,
 
+	NL80211_ATTR_KEY_TYPE,
+
+	NL80211_ATTR_MAX_SCAN_IE_LEN,
+	NL80211_ATTR_CIPHER_SUITES,
+
+	NL80211_ATTR_FREQ_BEFORE,
+	NL80211_ATTR_FREQ_AFTER,
+
+	NL80211_ATTR_FREQ_FIXED,
+
+
+	NL80211_ATTR_WIPHY_RETRY_SHORT,
+	NL80211_ATTR_WIPHY_RETRY_LONG,
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+	NL80211_ATTR_TIMED_OUT,
+
+	NL80211_ATTR_USE_MFP,
+
+	NL80211_ATTR_STA_FLAGS2,
+
+	NL80211_ATTR_CONTROL_PORT,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -581,6 +708,18 @@ enum nl80211_sta_flags {
 };
 
 /**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+	__u32 mask;
+	__u32 set;
+} __attribute__((packed));
+
+/**
  * enum nl80211_rate_info - bitrate information
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
@@ -1062,4 +1201,27 @@ enum nl80211_auth_type {
 	NL80211_AUTHTYPE_FT,
 	NL80211_AUTHTYPE_NETWORK_EAP,
 };
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ */
+enum nl80211_key_type {
+	NL80211_KEYTYPE_GROUP,
+	NL80211_KEYTYPE_PAIRWISE,
+	NL80211_KEYTYPE_PEERKEY,
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+	NL80211_MFP_NO,
+	NL80211_MFP_REQUIRED,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
new file mode 100644
index 00000000000..2cda00ccfcc
--- /dev/null
+++ b/include/linux/nl802154.h
@@ -0,0 +1,119 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef NL802154_H
+#define NL802154_H
+
+#define IEEE802154_NL_NAME "802.15.4 MAC"
+#define IEEE802154_MCAST_COORD_NAME "coordinator"
+#define IEEE802154_MCAST_BEACON_NAME "beacon"
+
+enum {
+	__IEEE802154_ATTR_INVALID,
+
+	IEEE802154_ATTR_DEV_NAME,
+	IEEE802154_ATTR_DEV_INDEX,
+
+	IEEE802154_ATTR_STATUS,
+
+	IEEE802154_ATTR_SHORT_ADDR,
+	IEEE802154_ATTR_HW_ADDR,
+	IEEE802154_ATTR_PAN_ID,
+
+	IEEE802154_ATTR_CHANNEL,
+
+	IEEE802154_ATTR_COORD_SHORT_ADDR,
+	IEEE802154_ATTR_COORD_HW_ADDR,
+	IEEE802154_ATTR_COORD_PAN_ID,
+
+	IEEE802154_ATTR_SRC_SHORT_ADDR,
+	IEEE802154_ATTR_SRC_HW_ADDR,
+	IEEE802154_ATTR_SRC_PAN_ID,
+
+	IEEE802154_ATTR_DEST_SHORT_ADDR,
+	IEEE802154_ATTR_DEST_HW_ADDR,
+	IEEE802154_ATTR_DEST_PAN_ID,
+
+	IEEE802154_ATTR_CAPABILITY,
+	IEEE802154_ATTR_REASON,
+	IEEE802154_ATTR_SCAN_TYPE,
+	IEEE802154_ATTR_CHANNELS,
+	IEEE802154_ATTR_DURATION,
+	IEEE802154_ATTR_ED_LIST,
+	IEEE802154_ATTR_BCN_ORD,
+	IEEE802154_ATTR_SF_ORD,
+	IEEE802154_ATTR_PAN_COORD,
+	IEEE802154_ATTR_BAT_EXT,
+	IEEE802154_ATTR_COORD_REALIGN,
+	IEEE802154_ATTR_SEC,
+
+	__IEEE802154_ATTR_MAX,
+};
+
+#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1)
+
+extern struct nla_policy ieee802154_policy[];
+
+/* commands */
+/* REQ should be responded with CONF
+ * and INDIC with RESP
+ */
+enum {
+	__IEEE802154_COMMAND_INVALID,
+
+	IEEE802154_ASSOCIATE_REQ,
+	IEEE802154_ASSOCIATE_CONF,
+	IEEE802154_DISASSOCIATE_REQ,
+	IEEE802154_DISASSOCIATE_CONF,
+	IEEE802154_GET_REQ,
+	IEEE802154_GET_CONF,
+	IEEE802154_RESET_REQ,
+	IEEE802154_RESET_CONF,
+	IEEE802154_SCAN_REQ,
+	IEEE802154_SCAN_CONF,
+	IEEE802154_SET_REQ,
+	IEEE802154_SET_CONF,
+	IEEE802154_START_REQ,
+	IEEE802154_START_CONF,
+	IEEE802154_SYNC_REQ,
+	IEEE802154_POLL_REQ,
+	IEEE802154_POLL_CONF,
+
+	IEEE802154_ASSOCIATE_INDIC,
+	IEEE802154_ASSOCIATE_RESP,
+	IEEE802154_DISASSOCIATE_INDIC,
+	IEEE802154_BEACON_NOTIFY_INDIC,
+	IEEE802154_ORPHAN_INDIC,
+	IEEE802154_ORPHAN_RESP,
+	IEEE802154_COMM_STATUS_INDIC,
+	IEEE802154_SYNC_LOSS_INDIC,
+
+	IEEE802154_GTS_REQ, /* Not supported yet */
+	IEEE802154_GTS_INDIC, /* Not supported yet */
+	IEEE802154_GTS_CONF, /* Not supported yet */
+	IEEE802154_RX_ENABLE_REQ, /* Not supported yet */
+	IEEE802154_RX_ENABLE_CONF, /* Not supported yet */
+
+	__IEEE802154_CMD_MAX,
+};
+
+#define IEEE802154_CMD_MAX (__IEEE802154_CMD_MAX - 1)
+
+#endif
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index b86fa2ffca0..81bc252dc8a 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -198,6 +198,7 @@ static inline int notifier_to_errno(int ret)
 #define NETDEV_CHANGENAME	0x000A
 #define NETDEV_FEAT_CHANGE	0x000B
 #define NETDEV_BONDING_FAILOVER 0x000C
+#define NETDEV_PRE_UP		0x000D
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
diff --git a/include/linux/of.h b/include/linux/of.h
index 6a7efa242f5..7be2d1043c1 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -77,6 +77,9 @@ extern int of_n_size_cells(struct device_node *np);
 extern const struct of_device_id *of_match_node(
 	const struct of_device_id *matches, const struct device_node *node);
 extern int of_modalias_node(struct device_node *node, char *modalias, int len);
+extern struct device_node *of_parse_phandle(struct device_node *np,
+					    const char *phandle_name,
+					    int index);
 extern int of_parse_phandles_with_args(struct device_node *np,
 	const char *list_name, const char *cells_name, int index,
 	struct device_node **out_node, const void **out_args);
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
new file mode 100644
index 00000000000..c9663c69030
--- /dev/null
+++ b/include/linux/of_mdio.h
@@ -0,0 +1,22 @@
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_MDIO_H
+#define __LINUX_OF_MDIO_H
+
+#include <linux/phy.h>
+#include <linux/of.h>
+
+extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
+extern struct phy_device *of_phy_find_device(struct device_node *phy_np);
+extern struct phy_device *of_phy_connect(struct net_device *dev,
+					 struct device_node *phy_np,
+					 void (*hndlr)(struct net_device *),
+					 u32 flags, phy_interface_t iface);
+
+#endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 7339c7bf733..13f126c89ae 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -18,7 +18,19 @@ struct page_cgroup {
 };
 
 void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
-void __init page_cgroup_init(void);
+
+#ifdef CONFIG_SPARSEMEM
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+extern void __init page_cgroup_init(void);
+#else
+void __init page_cgroup_init_flatmem(void);
+static inline void __init page_cgroup_init(void)
+{
+}
+#endif
+
 struct page_cgroup *lookup_page_cgroup(struct page *page);
 
 enum {
@@ -87,6 +99,10 @@ static inline void page_cgroup_init(void)
 {
 }
 
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+
 #endif
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d7d1c41a0b1..aa01d38c997 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1005,6 +1005,7 @@
 #define PCI_DEVICE_ID_PLX_PCI200SYN	0x3196
 #define PCI_DEVICE_ID_PLX_9030          0x9030
 #define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9056		0x9056
 #define PCI_DEVICE_ID_PLX_9080		0x9080
 #define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
 
@@ -1066,8 +1067,6 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS	0x0034
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
-#define PCI_DEVICE_ID_NVIDIA_NVENET_10		0x0037
-#define PCI_DEVICE_ID_NVIDIA_NVENET_11		0x0038
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
@@ -1078,21 +1077,16 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
-#define PCI_DEVICE_ID_NVIDIA_NVENET_8		0x0056
-#define PCI_DEVICE_ID_NVIDIA_NVENET_9		0x0057
 #define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
 #define PCI_DEVICE_ID_NVIDIA_CK804_PCIE		0x005d
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
-#define PCI_DEVICE_ID_NVIDIA_NVENET_2		0x0066
 #define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM		0x0069
 #define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
-#define PCI_DEVICE_ID_NVIDIA_NVENET_4		0x0086
 #define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM	0x0089
 #define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO		0x008a
-#define PCI_DEVICE_ID_NVIDIA_NVENET_5		0x008c
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT   0x0090
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX	0x0091
@@ -1108,15 +1102,12 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
-#define PCI_DEVICE_ID_NVIDIA_NVENET_3		0x00d6
 #define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM		0x00d9
 #define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
-#define PCI_DEVICE_ID_NVIDIA_NVENET_7		0x00df
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
-#define PCI_DEVICE_ID_NVIDIA_NVENET_6		0x00e6
 #define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO		0x00ea
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
 #define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0
@@ -1176,7 +1167,6 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
 #define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM		0x01c1
-#define PCI_DEVICE_ID_NVIDIA_NVENET_1		0x01c3
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
@@ -1199,8 +1189,6 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA	0x037E
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2	0x037F
-#define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
-#define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
@@ -1247,46 +1235,21 @@
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
-#define PCI_DEVICE_ID_NVIDIA_NVENET_14              0x0372
 #define PCI_DEVICE_ID_NVIDIA_NVENET_15              0x0373
-#define PCI_DEVICE_ID_NVIDIA_NVENET_16              0x03E5
-#define PCI_DEVICE_ID_NVIDIA_NVENET_17              0x03E6
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA      0x03E7
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS	    0x03EB
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE       0x03EC
-#define PCI_DEVICE_ID_NVIDIA_NVENET_18              0x03EE
-#define PCI_DEVICE_ID_NVIDIA_NVENET_19              0x03EF
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2     0x03F6
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3     0x03F7
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS	    0x0446
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE	    0x0448
-#define PCI_DEVICE_ID_NVIDIA_NVENET_20              0x0450
-#define PCI_DEVICE_ID_NVIDIA_NVENET_21              0x0451
-#define PCI_DEVICE_ID_NVIDIA_NVENET_22              0x0452
-#define PCI_DEVICE_ID_NVIDIA_NVENET_23              0x0453
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS     0x0542
-#define PCI_DEVICE_ID_NVIDIA_NVENET_24              0x054C
-#define PCI_DEVICE_ID_NVIDIA_NVENET_25              0x054D
-#define PCI_DEVICE_ID_NVIDIA_NVENET_26              0x054E
-#define PCI_DEVICE_ID_NVIDIA_NVENET_27              0x054F
-#define PCI_DEVICE_ID_NVIDIA_NVENET_28              0x07DC
-#define PCI_DEVICE_ID_NVIDIA_NVENET_29              0x07DD
-#define PCI_DEVICE_ID_NVIDIA_NVENET_30              0x07DE
-#define PCI_DEVICE_ID_NVIDIA_NVENET_31              0x07DF
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE       0x0560
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE       0x056C
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS    0x0752
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
-#define PCI_DEVICE_ID_NVIDIA_NVENET_32              0x0760
-#define PCI_DEVICE_ID_NVIDIA_NVENET_33              0x0761
-#define PCI_DEVICE_ID_NVIDIA_NVENET_34              0x0762
-#define PCI_DEVICE_ID_NVIDIA_NVENET_35              0x0763
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
-#define PCI_DEVICE_ID_NVIDIA_NVENET_36              0x0AB0
-#define PCI_DEVICE_ID_NVIDIA_NVENET_37              0x0AB1
-#define PCI_DEVICE_ID_NVIDIA_NVENET_38              0x0AB2
-#define PCI_DEVICE_ID_NVIDIA_NVENET_39              0x0AB3
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
@@ -1314,6 +1277,13 @@
 
 #define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
 #define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+#define PCI_DEVICE_ID_CREATIVE_20K1	0x0005
+#define PCI_DEVICE_ID_CREATIVE_20K2	0x000b
+#define PCI_SUBDEVICE_ID_CREATIVE_SB0760	0x0024
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08801	0x0041
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08802	0x0042
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08803	0x0043
+#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX	0x6000
 
 #define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
 #define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
@@ -1847,6 +1817,10 @@
 #define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
 #define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
 
+#define PCI_VENDOR_ID_DIGIGRAM		0x1369
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM	0xc001
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM	0xc002
+
 #define PCI_VENDOR_ID_KAWASAKI		0x136b
 #define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
 
@@ -1914,6 +1888,8 @@
 #define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
 #define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
 #define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_JHSE1	0xB553
+#define PCI_SUBDEVICE_ID_CCD_JH8S	0xB55B
 #define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
 #define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
 #define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
@@ -2115,6 +2091,7 @@
 #define PCI_VENDOR_ID_MAINPINE		0x1522
 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
 #define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
 #define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
 #define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
 #define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
@@ -2276,6 +2253,8 @@
 #define PCI_DEVICE_ID_MPC8547E		0x0018
 #define PCI_DEVICE_ID_MPC8545E		0x0019
 #define PCI_DEVICE_ID_MPC8545		0x001a
+#define PCI_DEVICE_ID_MPC8569E		0x0061
+#define PCI_DEVICE_ID_MPC8569		0x0060
 #define PCI_DEVICE_ID_MPC8568E		0x0020
 #define PCI_DEVICE_ID_MPC8568		0x0021
 #define PCI_DEVICE_ID_MPC8567E		0x0022
@@ -2288,6 +2267,8 @@
 #define PCI_DEVICE_ID_MPC8572		0x0041
 #define PCI_DEVICE_ID_MPC8536E		0x0050
 #define PCI_DEVICE_ID_MPC8536		0x0051
+#define PCI_DEVICE_ID_P2020E		0x0070
+#define PCI_DEVICE_ID_P2020		0x0071
 #define PCI_DEVICE_ID_MPC8641		0x7010
 #define PCI_DEVICE_ID_MPC8641D		0x7011
 #define PCI_DEVICE_ID_MPC8610		0x7018
@@ -2315,6 +2296,8 @@
 
 #define PCI_VENDOR_ID_QMI		0x1a32
 
+#define PCI_VENDOR_ID_AZWAVE		0x1a3b
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
 
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 6e133954e2e..1b3118a1023 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -120,6 +120,8 @@ enum perf_counter_sample_format {
 	PERF_SAMPLE_ID				= 1U << 6,
 	PERF_SAMPLE_CPU				= 1U << 7,
 	PERF_SAMPLE_PERIOD			= 1U << 8,
+
+	PERF_SAMPLE_MAX = 1U << 9,		/* non-ABI */
 };
 
 /*
@@ -131,17 +133,26 @@ enum perf_counter_read_format {
 	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
 	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
 	PERF_FORMAT_ID				= 1U << 2,
+
+	PERF_FORMAT_MAX = 1U << 3, 		/* non-ABI */
 };
 
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+
 /*
  * Hardware event to monitor via a performance monitoring counter:
  */
 struct perf_counter_attr {
+
 	/*
 	 * Major type: hardware/software/tracepoint/etc.
 	 */
 	__u32			type;
-	__u32			__reserved_1;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
 
 	/*
 	 * Type specific configuration information.
@@ -168,12 +179,12 @@ struct perf_counter_attr {
 				comm	       :  1, /* include comm data     */
 				freq           :  1, /* use freq, not period  */
 
-				__reserved_2   : 53;
+				__reserved_1   : 53;
 
 	__u32			wakeup_events;	/* wakeup every n events */
-	__u32			__reserved_3;
+	__u32			__reserved_2;
 
-	__u64			__reserved_4;
+	__u64			__reserved_3;
 };
 
 /*
@@ -621,7 +632,8 @@ extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
 static inline int is_software_counter(struct perf_counter *counter)
 {
 	return (counter->attr.type != PERF_TYPE_RAW) &&
-		(counter->attr.type != PERF_TYPE_HARDWARE);
+		(counter->attr.type != PERF_TYPE_HARDWARE) &&
+		(counter->attr.type != PERF_TYPE_HW_CACHE);
 }
 
 extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 97e40cb6b58..b1368b8f657 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -79,7 +79,7 @@ typedef enum {
  * Need to be a little smaller than phydev->dev.bus_id to leave room
  * for the ":%02x"
  */
-#define MII_BUS_ID_SIZE	(BUS_ID_SIZE - 3)
+#define MII_BUS_ID_SIZE	(20 - 3)
 
 /*
  * The Bus class for PHYs.  Devices which provide access to
@@ -407,7 +407,7 @@ struct phy_driver {
 /* A Structure for boards to register fixups with the PHY Lib */
 struct phy_fixup {
 	struct list_head list;
-	char bus_id[BUS_ID_SIZE];
+	char bus_id[20];
 	u32 phy_uid;
 	u32 phy_uid_mask;
 	int (*run)(struct phy_device *phydev);
@@ -444,10 +444,16 @@ static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
 
 int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
 struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
+int phy_device_register(struct phy_device *phy);
 int phy_clear_interrupt(struct phy_device *phydev);
 int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+		u32 flags, phy_interface_t interface);
 struct phy_device * phy_attach(struct net_device *dev,
 		const char *bus_id, u32 flags, phy_interface_t interface);
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface);
 struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
 		void (*handler)(struct net_device *), u32 flags,
 		phy_interface_t interface);
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 1d4e2d28982..b3f74764a58 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -382,14 +382,13 @@ struct dev_pm_info {
 #ifdef CONFIG_PM_SLEEP
 extern void device_pm_lock(void);
 extern int sysdev_resume(void);
-extern void device_power_up(pm_message_t state);
-extern void device_resume(pm_message_t state);
+extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_end(pm_message_t state);
 
 extern void device_pm_unlock(void);
 extern int sysdev_suspend(pm_message_t state);
-extern int device_power_down(pm_message_t state);
-extern int device_suspend(pm_message_t state);
-extern int device_prepare_suspend(pm_message_t state);
+extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_start(pm_message_t state);
 
 extern void __suspend_report_result(const char *function, void *fn, int ret);
 
@@ -403,7 +402,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
 #define device_pm_lock() do {} while (0)
 #define device_pm_unlock() do {} while (0)
 
-static inline int device_suspend(pm_message_t state)
+static inline int dpm_suspend_start(pm_message_t state)
 {
 	return 0;
 }
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index ca3c8877302..b063c7328ba 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -446,6 +446,7 @@ int pnp_start_dev(struct pnp_dev *dev);
 int pnp_stop_dev(struct pnp_dev *dev);
 int pnp_activate_dev(struct pnp_dev *dev);
 int pnp_disable_dev(struct pnp_dev *dev);
+int pnp_range_reserved(resource_size_t start, resource_size_t end);
 
 /* protocol helpers */
 int pnp_is_active(struct pnp_dev *dev);
@@ -476,6 +477,7 @@ static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_range_reserved(resource_size_t start, resource_size_t end) { return 0;}
 
 /* protocol helpers */
 static inline int pnp_is_active(struct pnp_dev *dev) { return 0; }
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index fbfa3d44d33..e6e77d31c41 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -93,20 +93,9 @@ struct vmcore {
 
 #ifdef CONFIG_PROC_FS
 
-extern spinlock_t proc_subdir_lock;
-
 extern void proc_root_init(void);
 
 void proc_flush_task(struct task_struct *task);
-struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
-int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
-unsigned long task_vsize(struct mm_struct *);
-int task_statm(struct mm_struct *, int *, int *, int *, int *);
-void task_mem(struct seq_file *, struct mm_struct *);
-void clear_refs_smap(struct mm_struct *mm);
-
-struct proc_dir_entry *de_get(struct proc_dir_entry *de);
-void de_put(struct proc_dir_entry *de);
 
 extern struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
 						struct proc_dir_entry *parent);
@@ -116,20 +105,7 @@ struct proc_dir_entry *proc_create_data(const char *name, mode_t mode,
 				void *data);
 extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent);
 
-extern struct vfsmount *proc_mnt;
 struct pid_namespace;
-extern int proc_fill_super(struct super_block *);
-extern struct inode *proc_get_inode(struct super_block *, unsigned int, struct proc_dir_entry *);
-
-/*
- * These are generic /proc routines that use the internal
- * "struct proc_dir_entry" tree to traverse the filesystem.
- *
- * The /proc root directory has extended versions to take care
- * of the /proc/<pid> subdirectories.
- */
-extern int proc_readdir(struct file *, void *, filldir_t);
-extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
 
 extern int pid_ns_prepare_proc(struct pid_namespace *ns);
 extern void pid_ns_release_proc(struct pid_namespace *ns);
diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h
index 787d19ea9f4..8b9aee1a9ce 100644
--- a/include/linux/qnx4_fs.h
+++ b/include/linux/qnx4_fs.h
@@ -85,65 +85,4 @@ struct qnx4_super_block {
 	struct qnx4_inode_entry AltBoot;
 };
 
-#ifdef __KERNEL__
-
-#define QNX4_DEBUG 0
-
-#if QNX4_DEBUG
-#define QNX4DEBUG(X) printk X
-#else
-#define QNX4DEBUG(X) (void) 0
-#endif
-
-struct qnx4_sb_info {
-	struct buffer_head	*sb_buf;	/* superblock buffer */
-	struct qnx4_super_block	*sb;		/* our superblock */
-	unsigned int		Version;	/* may be useful */
-	struct qnx4_inode_entry	*BitMap;	/* useful */
-};
-
-struct qnx4_inode_info {
-	struct qnx4_inode_entry raw;
-	loff_t mmu_private;
-	struct inode vfs_inode;
-};
-
-extern struct inode *qnx4_iget(struct super_block *, unsigned long);
-extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd);
-extern unsigned long qnx4_count_free_blocks(struct super_block *sb);
-extern unsigned long qnx4_block_map(struct inode *inode, long iblock);
-
-extern struct buffer_head *qnx4_bread(struct inode *, int, int);
-
-extern const struct inode_operations qnx4_file_inode_operations;
-extern const struct inode_operations qnx4_dir_inode_operations;
-extern const struct file_operations qnx4_file_operations;
-extern const struct file_operations qnx4_dir_operations;
-extern int qnx4_is_free(struct super_block *sb, long block);
-extern int qnx4_set_bitmap(struct super_block *sb, long block, int busy);
-extern int qnx4_create(struct inode *inode, struct dentry *dentry, int mode, struct nameidata *nd);
-extern void qnx4_truncate(struct inode *inode);
-extern void qnx4_free_inode(struct inode *inode);
-extern int qnx4_unlink(struct inode *dir, struct dentry *dentry);
-extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry);
-extern int qnx4_sync_file(struct file *file, struct dentry *dentry, int);
-extern int qnx4_sync_inode(struct inode *inode);
-
-static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb)
-{
-	return sb->s_fs_info;
-}
-
-static inline struct qnx4_inode_info *qnx4_i(struct inode *inode)
-{
-	return container_of(inode, struct qnx4_inode_info, vfs_inode);
-}
-
-static inline struct qnx4_inode_entry *qnx4_raw_inode(struct inode *inode)
-{
-	return &qnx4_i(inode)->raw;
-}
-
-#endif				/* __KERNEL__ */
-
 #endif
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 36353d95c8d..7bc45759368 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -20,7 +20,12 @@ static inline struct quota_info *sb_dqopt(struct super_block *sb)
 /*
  * declaration of quota_function calls in kernel.
  */
-void sync_dquots(struct super_block *sb, int type);
+void sync_quota_sb(struct super_block *sb, int type);
+static inline void writeout_quota_sb(struct super_block *sb, int type)
+{
+	if (sb->s_qcop->quota_sync)
+		sb->s_qcop->quota_sync(sb, type);
+}
 
 int dquot_initialize(struct inode *inode, int type);
 int dquot_drop(struct inode *inode);
@@ -253,12 +258,7 @@ static inline void vfs_dq_free_inode(struct inode *inode)
 		inode->i_sb->dq_op->free_inode(inode, 1);
 }
 
-/* The following two functions cannot be called inside a transaction */
-static inline void vfs_dq_sync(struct super_block *sb)
-{
-	sync_dquots(sb, -1);
-}
-
+/* Cannot be called inside a transaction */
 static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	int ret = -ENOSYS;
@@ -334,7 +334,11 @@ static inline void vfs_dq_free_inode(struct inode *inode)
 {
 }
 
-static inline void vfs_dq_sync(struct super_block *sb)
+static inline void sync_quota_sb(struct super_block *sb, int type)
+{
+}
+
+static inline void writeout_quota_sb(struct super_block *sb, int type)
 {
 }
 
diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h
new file mode 100644
index 00000000000..61401649fe7
--- /dev/null
+++ b/include/linux/regulator/lp3971.h
@@ -0,0 +1,51 @@
+/*
+ * National Semiconductors LP3971 PMIC chip client interface
+ *
+ *  Copyright (C) 2009 Samsung Electronics
+ *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_REGULATOR_LP3971_H
+#define __LINUX_REGULATOR_LP3971_H
+
+#include <linux/regulator/machine.h>
+
+#define LP3971_LDO1  0
+#define LP3971_LDO2  1
+#define LP3971_LDO3  2
+#define LP3971_LDO4  3
+#define LP3971_LDO5  4
+
+#define LP3971_DCDC1 5
+#define LP3971_DCDC2 6
+#define LP3971_DCDC3 7
+
+#define LP3971_NUM_REGULATORS 8
+
+struct lp3971_regulator_subdev {
+	int id;
+	struct regulator_init_data *initdata;
+};
+
+struct lp3971_platform_data {
+	int num_regulators;
+	struct lp3971_regulator_subdev *regulators;
+};
+
+#endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
new file mode 100644
index 00000000000..44563192bf1
--- /dev/null
+++ b/include/linux/regulator/max1586.h
@@ -0,0 +1,63 @@
+/*
+ * max1586.h  --  Voltage regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef REGULATOR_MAX1586
+#define REGULATOR_MAX1586
+
+#include <linux/regulator/machine.h>
+
+#define MAX1586_V3 0
+#define MAX1586_V6 1
+
+/* precalculated values for v3_gain */
+#define MAX1586_GAIN_NO_R24   1000000  /* 700000 .. 1475000 mV */
+#define MAX1586_GAIN_R24_3k32 1051098  /* 735768 .. 1550369 mV */
+#define MAX1586_GAIN_R24_5k11 1078648  /* 755053 .. 1591005 mV */
+#define MAX1586_GAIN_R24_7k5  1115432  /* 780802 .. 1645262 mV */
+
+/**
+ * max1586_subdev_data - regulator data
+ * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
+ * @name: regulator cute name (example for V3: "vcc_core")
+ * @platform_data: regulator init data (contraints, supplies, ...)
+ */
+struct max1586_subdev_data {
+	int				id;
+	char				*name;
+	struct regulator_init_data	*platform_data;
+};
+
+/**
+ * max1586_platform_data - platform data for max1586
+ * @num_subdevs: number of regultors used (may be 1 or 2)
+ * @subdevs: regulator used
+ *           At most, there will be a regulator for V3 and one for V6 voltages.
+ * @v3_gain: gain on the V3 voltage output multiplied by 1e6.
+ *           This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6)
+ *           for an external resistor configuration as described in the
+ *           data sheet (R25=100kOhm).
+ */
+struct max1586_platform_data {
+	int num_subdevs;
+	struct max1586_subdev_data *subdevs;
+	int v3_gain;
+};
+
+#endif
diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h
new file mode 100644
index 00000000000..b4554ce9d4b
--- /dev/null
+++ b/include/linux/regulator/userspace-consumer.h
@@ -0,0 +1,25 @@
+#ifndef __REGULATOR_PLATFORM_CONSUMER_H_
+#define __REGULATOR_PLATFORM_CONSUMER_H_
+
+struct regulator_consumer_supply;
+
+/**
+ * struct regulator_userspace_consumer_data - line consumer
+ * initialisation data.
+ *
+ * @name: Name for the consumer line
+ * @num_supplies: Number of supplies feeding the line
+ * @supplies: Supplies configuration.
+ * @init_on: Set if the regulators supplying the line should be
+ *           enabled during initialisation
+ */
+struct regulator_userspace_consumer_data {
+	const char *name;
+
+	int num_supplies;
+	struct regulator_bulk_data *supplies;
+
+	bool init_on;
+};
+
+#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 6473650c28f..dab68bbed67 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -453,6 +453,7 @@ enum reiserfs_mount_options {
 	REISERFS_ATTRS,
 	REISERFS_XATTRS_USER,
 	REISERFS_POSIXACL,
+	REISERFS_EXPOSE_PRIVROOT,
 	REISERFS_BARRIER_NONE,
 	REISERFS_BARRIER_FLUSH,
 
@@ -490,6 +491,7 @@ enum reiserfs_mount_options {
 #define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
 #define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
 #define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
+#define reiserfs_expose_privroot(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_EXPOSE_PRIVROOT))
 #define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
 #define reiserfs_barrier_none(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_NONE))
 #define reiserfs_barrier_flush(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_FLUSH))
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 164332cbb77..16e39c7a67f 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -4,6 +4,7 @@
 /*
  * Copyright (C) 2006 - 2007 Ivo van Doorn
  * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,131 +23,331 @@
  */
 
 #include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/leds.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
 
 /**
  * enum rfkill_type - type of rfkill switch.
- * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (userspace only)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
  */
 enum rfkill_type {
-	RFKILL_TYPE_WLAN ,
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
 	RFKILL_TYPE_BLUETOOTH,
 	RFKILL_TYPE_UWB,
 	RFKILL_TYPE_WIMAX,
 	RFKILL_TYPE_WWAN,
-	RFKILL_TYPE_MAX,
+	NUM_RFKILL_TYPES,
 };
 
-enum rfkill_state {
-	RFKILL_STATE_SOFT_BLOCKED = 0,	/* Radio output blocked */
-	RFKILL_STATE_UNBLOCKED    = 1,	/* Radio output allowed */
-	RFKILL_STATE_HARD_BLOCKED = 2,	/* Output blocked, non-overrideable */
-	RFKILL_STATE_MAX,		/* marker for last valid state */
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
 };
 
-/*
- * These are DEPRECATED, drivers using them should be verified to
- * comply with the rfkill usage guidelines in Documentation/rfkill.txt
- * and then converted to use the new names for rfkill_state
- */
-#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED
-#define RFKILL_STATE_ON  RFKILL_STATE_UNBLOCKED
-
-/**
- * struct rfkill - rfkill control structure.
- * @name: Name of the switch.
- * @type: Radio type which the button controls, the value stored
- *	here should be a value from enum rfkill_type.
- * @state: State of the switch, "UNBLOCKED" means radio can operate.
- * @user_claim_unsupported: Whether the hardware supports exclusive
- *	RF-kill control by userspace. Set this before registering.
- * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions.  It serializes callbacks
- *	and also protects the state.
- * @data: Pointer to the RF button drivers private data which will be
- *	passed along when toggling radio state.
- * @toggle_radio(): Mandatory handler to control state of the radio.
- *	only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are
- *	valid parameters.
- * @get_state(): handler to read current radio state from hardware,
- *      may be called from atomic context, should return 0 on success.
- *      Either this handler OR judicious use of rfkill_force_state() is
- *      MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED.
- * @led_trigger: A LED trigger for this button's LED.
- * @dev: Device structure integrating the switch into device tree.
- * @node: Used to place switch into list of all switches known to the
- *	the system.
- *
- * This structure represents a RF switch located on a network device.
- */
-struct rfkill {
-	const char *name;
-	enum rfkill_type type;
-
-	bool user_claim_unsupported;
-	bool user_claim;
-
-	/* the mutex serializes callbacks and also protects
-	 * the state */
-	struct mutex mutex;
-	enum rfkill_state state;
-	void *data;
-	int (*toggle_radio)(void *data, enum rfkill_state state);
-	int (*get_state)(void *data, enum rfkill_state *state);
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __packed;
 
-#ifdef CONFIG_RFKILL_LEDS
-	struct led_trigger led_trigger;
-#endif
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+#ifdef __KERNEL__
+/* don't allow anyone to use these in the kernel */
+enum rfkill_user_states {
+	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
+	RFKILL_USER_STATE_UNBLOCKED	= RFKILL_STATE_UNBLOCKED,
+	RFKILL_USER_STATE_HARD_BLOCKED	= RFKILL_STATE_HARD_BLOCKED,
+};
+#undef RFKILL_STATE_SOFT_BLOCKED
+#undef RFKILL_STATE_UNBLOCKED
+#undef RFKILL_STATE_HARD_BLOCKED
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+/* this is opaque */
+struct rfkill;
 
-	struct device dev;
-	struct list_head node;
-	enum rfkill_state state_for_resume;
+/**
+ * struct rfkill_ops - rfkill driver methods
+ *
+ * @poll: poll the rfkill block state(s) -- only assign this method
+ *	when you need polling. When called, simply call one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. If the hw
+ *	is getting unblocked you need to take into account the return
+ *	value of those functions to make sure the software block is
+ *	properly used.
+ * @query: query the rfkill block state(s) and call exactly one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. Assign this
+ *	method if input events can cause hardware state changes to make
+ *	the rfkill core query your driver before setting a requested
+ *	block.
+ * @set_block: turn the transmitter on (blocked == false) or off
+ *	(blocked == true) -- ignore and return 0 when hard blocked.
+ *	This callback must be assigned.
+ */
+struct rfkill_ops {
+	void	(*poll)(struct rfkill *rfkill, void *data);
+	void	(*query)(struct rfkill *rfkill, void *data);
+	int	(*set_block)(void *data, bool blocked);
 };
-#define to_rfkill(d)	container_of(d, struct rfkill, dev)
 
-struct rfkill * __must_check rfkill_allocate(struct device *parent,
-					     enum rfkill_type type);
-void rfkill_free(struct rfkill *rfkill);
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+/**
+ * rfkill_alloc - allocate rfkill structure
+ * @name: name of the struct -- the string is not copied internally
+ * @parent: device that has rf switch on it
+ * @type: type of the switch (RFKILL_TYPE_*)
+ * @ops: rfkill methods
+ * @ops_data: data passed to each method
+ *
+ * This function should be called by the transmitter driver to allocate an
+ * rfkill structure. Returns %NULL on failure.
+ */
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data);
+
+/**
+ * rfkill_register - Register a rfkill structure.
+ * @rfkill: rfkill structure to be registered
+ *
+ * This function should be called by the transmitter driver to register
+ * the rfkill structure. Before calling this function the driver needs
+ * to be ready to service method calls from rfkill.
+ *
+ * If the software blocked state is not set before registration,
+ * set_block will be called to initialize it to a default value.
+ *
+ * If the hardware blocked state is not set before registration,
+ * it is assumed to be unblocked.
+ */
 int __must_check rfkill_register(struct rfkill *rfkill);
+
+/**
+ * rfkill_pause_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_pause_polling(struct rfkill *rfkill);
+
+/**
+ * rfkill_resume_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_resume_polling(struct rfkill *rfkill);
+
+
+/**
+ * rfkill_unregister - Unregister a rfkill structure.
+ * @rfkill: rfkill structure to be unregistered
+ *
+ * This function should be called by the network driver during device
+ * teardown to destroy rfkill structure. Until it returns, the driver
+ * needs to be able to service method calls.
+ */
 void rfkill_unregister(struct rfkill *rfkill);
 
-int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state);
-int rfkill_set_default(enum rfkill_type type, enum rfkill_state state);
+/**
+ * rfkill_destroy - free rfkill structure
+ * @rfkill: rfkill structure to be destroyed
+ *
+ * Destroys the rfkill structure.
+ */
+void rfkill_destroy(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_hw_state - Set the internal rfkill hardware block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current hardware block state to set
+ *
+ * rfkill drivers that get events when the hard-blocked state changes
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  They should also use this after
+ * resume if the state could have changed.
+ *
+ * You need not (but may) call this function if poll_state is assigned.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked) so that drivers need not keep track of the soft
+ * block state -- which they might not be able to.
+ */
+bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_sw_state - Set the internal rfkill software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that get events when the soft-blocked state changes
+ * (yes, some platforms directly act on input but allow changing again)
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  It is not necessary to notify on
+ * resume; since hibernation can always change the soft-blocked state,
+ * the rfkill core will unconditionally restore the previous state.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked).
+ */
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_states - Set the internal rfkill block states
+ * @rfkill: pointer to the rfkill class to modify.
+ * @sw: the current software block state to set
+ * @hw: the current hardware block state to set
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ */
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
 
 /**
- * rfkill_state_complement - return complementar state
- * @state: state to return the complement of
+ * rfkill_blocked - query rfkill block
  *
- * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED,
- * returns RFKILL_STATE_UNBLOCKED otherwise.
+ * @rfkill: rfkill struct to query
  */
-static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state)
+bool rfkill_blocked(struct rfkill *rfkill);
+#else /* !RFKILL */
+static inline struct rfkill * __must_check
+rfkill_alloc(const char *name,
+	     struct device *parent,
+	     const enum rfkill_type type,
+	     const struct rfkill_ops *ops,
+	     void *ops_data)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	if (rfkill == ERR_PTR(-ENODEV))
+		return 0;
+	return -EINVAL;
+}
+
+static inline void rfkill_pause_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_resume_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_unregister(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_destroy(struct rfkill *rfkill)
+{
+}
+
+static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
 {
-	return (state == RFKILL_STATE_UNBLOCKED) ?
-		RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
+	return blocked;
 }
 
+static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+}
+
+static inline bool rfkill_blocked(struct rfkill *rfkill)
+{
+	return false;
+}
+#endif /* RFKILL || RFKILL_MODULE */
+
+
+#ifdef CONFIG_RFKILL_LEDS
 /**
- * rfkill_get_led_name - Get the LED trigger name for the button's LED.
+ * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED.
  * This function might return a NULL pointer if registering of the
- * LED trigger failed.
- * Use this as "default_trigger" for the LED.
+ * LED trigger failed. Use this as "default_trigger" for the LED.
  */
-static inline char *rfkill_get_led_name(struct rfkill *rfkill)
-{
-#ifdef CONFIG_RFKILL_LEDS
-	return (char *)(rfkill->led_trigger.name);
+const char *rfkill_get_led_trigger_name(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_led_trigger_name -- set the LED trigger name
+ * @rfkill: rfkill struct
+ * @name: LED trigger name
+ *
+ * This function sets the LED trigger name of the radio LED
+ * trigger that rfkill creates. It is optional, but if called
+ * must be called before rfkill_register() to be effective.
+ */
+void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name);
 #else
+static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill)
+{
 	return NULL;
-#endif
 }
 
+static inline void
+rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
+{
+}
+#endif
+
+#endif /* __KERNEL__ */
+
 #endif /* RFKILL_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4896fdfec91..c900aa53007 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -261,6 +261,7 @@ extern void task_rq_unlock_wait(struct task_struct *p);
 extern cpumask_var_t nohz_cpu_mask;
 #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
 extern int select_nohz_load_balancer(int cpu);
+extern int get_nohz_load_balancer(void);
 #else
 static inline int select_nohz_load_balancer(int cpu)
 {
@@ -1796,11 +1797,23 @@ extern unsigned int sysctl_sched_child_runs_first;
 extern unsigned int sysctl_sched_features;
 extern unsigned int sysctl_sched_migration_cost;
 extern unsigned int sysctl_sched_nr_migrate;
+extern unsigned int sysctl_timer_migration;
 
 int sched_nr_latency_handler(struct ctl_table *table, int write,
 		struct file *file, void __user *buffer, size_t *length,
 		loff_t *ppos);
 #endif
+#ifdef CONFIG_SCHED_DEBUG
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+	return sysctl_timer_migration;
+}
+#else
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+	return 1;
+}
+#endif
 extern unsigned int sysctl_sched_rt_period;
 extern int sysctl_sched_rt_runtime;
 
@@ -2212,6 +2225,12 @@ static inline int test_tsk_need_resched(struct task_struct *tsk)
 	return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
 }
 
+static inline int restart_syscall(void)
+{
+	set_tsk_thread_flag(current, TIF_SIGPENDING);
+	return -ERESTARTNOINTR;
+}
+
 static inline int signal_pending(struct task_struct *p)
 {
 	return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index c2731bfe04d..b464b9d3d24 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -487,17 +487,17 @@ typedef enum {
 	 *
 	 * Value          Cause Code
 	 * ---------      ----------------
-	 * 0x0100          Request to Delete Last Remaining IP Address.
-	 * 0x0101          Operation Refused Due to Resource Shortage.
-	 * 0x0102          Request to Delete Source IP Address.
-	 * 0x0103          Association Aborted due to illegal ASCONF-ACK
-	 * 0x0104          Request refused - no authorization.
+	 * 0x00A0          Request to Delete Last Remaining IP Address.
+	 * 0x00A1          Operation Refused Due to Resource Shortage.
+	 * 0x00A2          Request to Delete Source IP Address.
+	 * 0x00A3          Association Aborted due to illegal ASCONF-ACK
+	 * 0x00A4          Request refused - no authorization.
 	 */
-	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x0100),
-	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x0101),
-	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x0102),
-	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x0103),
-	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x0104),
+	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x00A0),
+	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x00A1),
+	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x00A2),
+	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x00A3),
+	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x00A4),
 
 	/* AUTH Section 4.  New Error Cause
 	 *
diff --git a/include/linux/section-names.h b/include/linux/section-names.h
deleted file mode 100644
index c956f4eb2ad..00000000000
--- a/include/linux/section-names.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_SECTION_NAMES_H
-#define __LINUX_SECTION_NAMES_H
-
-#define HEAD_TEXT_SECTION .head.text
-
-#endif /* !__LINUX_SECTION_NAMES_H */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 5fd389162f0..fa51293f270 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -189,20 +189,23 @@ struct skb_shared_info {
 	atomic_t	dataref;
 	unsigned short	nr_frags;
 	unsigned short	gso_size;
+#ifdef CONFIG_HAS_DMA
+	dma_addr_t	dma_head;
+#endif
 	/* Warning: this field is not always filled in (UFO)! */
 	unsigned short	gso_segs;
 	unsigned short  gso_type;
 	__be32          ip6_frag_id;
 	union skb_shared_tx tx_flags;
-#ifdef CONFIG_HAS_DMA
-	unsigned int	num_dma_maps;
-#endif
 	struct sk_buff	*frag_list;
 	struct skb_shared_hwtstamps hwtstamps;
 	skb_frag_t	frags[MAX_SKB_FRAGS];
 #ifdef CONFIG_HAS_DMA
-	dma_addr_t	dma_maps[MAX_SKB_FRAGS + 1];
+	dma_addr_t	dma_maps[MAX_SKB_FRAGS];
 #endif
+	/* Intermediate layers must ensure that destructor_arg
+	 * remains valid until skb destructor */
+	void *		destructor_arg;
 };
 
 /* We divide dataref into two halves.  The higher 16 bits hold references
@@ -301,9 +304,6 @@ typedef unsigned char *sk_buff_data_t;
  *	@tc_verd: traffic control verdict
  *	@ndisc_nodetype: router type (from link layer)
  *	@do_not_encrypt: set to prevent encryption of this frame
- *	@requeue: set to indicate that the wireless core should attempt
- *		a software retry on this frame if we failed to
- *		receive an ACK for it
  *	@dma_cookie: a cookie to one of several possible DMA operations
  *		done by skb DMA functions
  *	@secmark: security marking
@@ -319,10 +319,7 @@ struct sk_buff {
 	ktime_t			tstamp;
 	struct net_device	*dev;
 
-	union {
-		struct  dst_entry	*dst;
-		struct  rtable		*rtable;
-	};
+	unsigned long		_skb_dst;
 #ifdef CONFIG_XFRM
 	struct	sec_path	*sp;
 #endif
@@ -380,7 +377,6 @@ struct sk_buff {
 #endif
 #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
 	__u8			do_not_encrypt:1;
-	__u8			requeue:1;
 #endif
 	/* 0/13/14 bit hole */
 
@@ -423,6 +419,21 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
 			  enum dma_data_direction dir);
 #endif
 
+static inline struct dst_entry *skb_dst(const struct sk_buff *skb)
+{
+	return (struct dst_entry *)skb->_skb_dst;
+}
+
+static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
+{
+	skb->_skb_dst = (unsigned long)dst;
+}
+
+static inline struct rtable *skb_rtable(const struct sk_buff *skb)
+{
+	return (struct rtable *)skb_dst(skb);
+}
+
 extern void kfree_skb(struct sk_buff *skb);
 extern void consume_skb(struct sk_buff *skb);
 extern void	       __kfree_skb(struct sk_buff *skb);
@@ -1062,7 +1073,7 @@ extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page,
 			    int off, int size);
 
 #define SKB_PAGE_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->nr_frags)
-#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->frag_list)
+#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_has_frags(skb))
 #define SKB_LINEAR_ASSERT(skb)  BUG_ON(skb_is_nonlinear(skb))
 
 #ifdef NET_SKBUFF_DATA_USES_OFFSET
@@ -1701,6 +1712,25 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
 		     skb = skb->prev)
 
 
+static inline bool skb_has_frags(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->frag_list != NULL;
+}
+
+static inline void skb_frag_list_init(struct sk_buff *skb)
+{
+	skb_shinfo(skb)->frag_list = NULL;
+}
+
+static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag)
+{
+	frag->next = skb_shinfo(skb)->frag_list;
+	skb_shinfo(skb)->frag_list = frag;
+}
+
+#define skb_walk_frags(skb, iter)	\
+	for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next)
+
 extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags,
 					   int *peeked, int *err);
 extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags,
@@ -1715,8 +1745,14 @@ extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							struct iovec *iov);
 extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
 						    int offset,
-						    struct iovec *from,
+						    const struct iovec *from,
+						    int from_offset,
 						    int len);
+extern int	       skb_copy_datagram_const_iovec(const struct sk_buff *from,
+						     int offset,
+						     const struct iovec *to,
+						     int to_offset,
+						     int size);
 extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
 extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
 					 unsigned int flags);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 48803064ced..219b8fb4651 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -319,4 +319,6 @@ static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
 	return kmalloc_node(size, flags | __GFP_ZERO, node);
 }
 
+void __init kmem_cache_init_late(void);
+
 #endif	/* _LINUX_SLAB_H */
diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h
index 0ec00b39d00..bb5368df4be 100644
--- a/include/linux/slob_def.h
+++ b/include/linux/slob_def.h
@@ -34,4 +34,9 @@ static __always_inline void *__kmalloc(size_t size, gfp_t flags)
 	return kmalloc(size, flags);
 }
 
+static inline void kmem_cache_init_late(void)
+{
+	/* Nothing to do */
+}
+
 #endif /* __LINUX_SLOB_DEF_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index be5d40c43bd..4dcbc2c7149 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -302,4 +302,6 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
 }
 #endif
 
+void __init kmem_cache_init_late(void);
+
 #endif /* _LINUX_SLUB_DEF_H */
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index b32725075d7..5241e4fb4ec 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -47,4 +47,14 @@ struct smsc911x_platform_config {
 #define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))
 #define SMSC911X_SAVE_MAC_ADDRESS		(BIT(4))
 
+/*
+ * SMSC911X_SWAP_FIFO:
+ * Enables software byte swap for fifo data. Should only be used as a
+ * "last resort" in the case of big endian mode on boards with incorrectly
+ * routed data bus to older devices such as LAN9118. Newer devices such as
+ * LAN9221 can handle this in hardware, there are registers to control
+ * this swapping but the driver doesn't currently use them.
+ */
+#define SMSC911X_SWAP_FIFO			(BIT(5))
+
 #endif /* __LINUX_SMSC911X_H__ */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index aee3f1e1d1c..0f953fe4041 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -18,7 +18,7 @@
 enum
 {
 	IPSTATS_MIB_NUM = 0,
-	IPSTATS_MIB_INRECEIVES,			/* InReceives */
+	IPSTATS_MIB_INPKTS,			/* InReceives */
 	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
 	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
 	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
@@ -28,7 +28,7 @@ enum
 	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
 	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
 	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
-	IPSTATS_MIB_OUTREQUESTS,		/* OutRequests */
+	IPSTATS_MIB_OUTPKTS,			/* OutRequests */
 	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
 	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
 	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
@@ -42,6 +42,12 @@ enum
 	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
 	IPSTATS_MIB_INBCASTPKTS,		/* InBcastPkts */
 	IPSTATS_MIB_OUTBCASTPKTS,		/* OutBcastPkts */
+	IPSTATS_MIB_INOCTETS,			/* InOctets */
+	IPSTATS_MIB_OUTOCTETS,			/* OutOctets */
+	IPSTATS_MIB_INMCASTOCTETS,		/* InMcastOctets */
+	IPSTATS_MIB_OUTMCASTOCTETS,		/* OutMcastOctets */
+	IPSTATS_MIB_INBCASTOCTETS,		/* InBcastOctets */
+	IPSTATS_MIB_OUTBCASTOCTETS,		/* OutBcastOctets */
 	__IPSTATS_MIB_MAX
 };
 
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 421afb4d29b..3b461dffe24 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -194,7 +194,8 @@ struct ucred {
 #define AF_RXRPC	33	/* RxRPC sockets 		*/
 #define AF_ISDN		34	/* mISDN sockets 		*/
 #define AF_PHONET	35	/* Phonet sockets		*/
-#define AF_MAX		36	/* For now.. */
+#define AF_IEEE802154	36	/* IEEE802154 sockets		*/
+#define AF_MAX		37	/* For now.. */
 
 /* Protocol families, same as address families. */
 #define PF_UNSPEC	AF_UNSPEC
@@ -233,6 +234,7 @@ struct ucred {
 #define PF_RXRPC	AF_RXRPC
 #define PF_ISDN		AF_ISDN
 #define PF_PHONET	AF_PHONET
+#define PF_IEEE802154	AF_IEEE802154
 #define PF_MAX		AF_MAX
 
 /* Maximum queue length specifiable by listen.  */
@@ -303,14 +305,15 @@ struct ucred {
 #define SOL_BLUETOOTH	274
 #define SOL_PNPIPE	275
 #define SOL_RDS		276
+#define SOL_IUCV	277
 
 /* IPX options */
 #define IPX_TYPE	1
 
 #ifdef __KERNEL__
 extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
-extern int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, 
-				int offset, int len);
+extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
+			       int offset, int len);
 extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
 					  struct iovec *iov, 
 					  int offset, 
@@ -318,6 +321,8 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
 
 extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
 extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
+extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
+			     int offset, int len);
 extern int move_addr_to_user(struct sockaddr *kaddr, int klen, void __user *uaddr, int __user *ulen);
 extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr);
 extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h
index 79506f5f9e6..1b5d5384fcd 100644
--- a/include/linux/spi/libertas_spi.h
+++ b/include/linux/spi/libertas_spi.h
@@ -22,9 +22,6 @@ struct libertas_spi_platform_data {
 	 * speed, you may want to use 0 here. */
 	u16 use_dummy_writes;
 
-	/* GPIO number to use as chip select */
-	u16 gpio_cs;
-
 	/* Board specific setup/teardown */
 	int (*setup)(struct spi_device *spi);
 	int (*teardown)(struct spi_device *spi);
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
new file mode 100644
index 00000000000..11430cab2aa
--- /dev/null
+++ b/include/linux/spi/wl12xx.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_SPI_WL12XX_H
+#define _LINUX_SPI_WL12XX_H
+
+struct wl12xx_platform_data {
+	void (*set_power)(bool enable);
+};
+
+#endif
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 795032edfc4..cd15df6c63c 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -245,11 +245,6 @@ extern unsigned long get_safe_page(gfp_t gfp_mask);
 
 extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
 extern int hibernate(void);
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
 extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
@@ -258,6 +253,16 @@ static inline void swsusp_unset_page_free(struct page *p) {}
 
 static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
 static inline int hibernate(void) { return -ENOSYS; }
+static inline bool system_entering_hibernation(void) { return false; }
+#endif /* CONFIG_HIBERNATION */
+
+#ifdef CONFIG_HIBERNATION_NVS
+extern int hibernate_nvs_register(unsigned long start, unsigned long size);
+extern int hibernate_nvs_alloc(void);
+extern void hibernate_nvs_free(void);
+extern void hibernate_nvs_save(void);
+extern void hibernate_nvs_restore(void);
+#else /* CONFIG_HIBERNATION_NVS */
 static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
@@ -266,8 +271,7 @@ static inline int hibernate_nvs_alloc(void) { return 0; }
 static inline void hibernate_nvs_free(void) {}
 static inline void hibernate_nvs_save(void) {}
 static inline void hibernate_nvs_restore(void) {}
-static inline bool system_entering_hibernation(void) { return false; }
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION_NVS */
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index c6c84ad8bd7..418d90f5eff 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -758,6 +758,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
 
 asmlinkage long sys_perf_counter_open(
-		const struct perf_counter_attr __user *attr_uptr,
+		struct perf_counter_attr __user *attr_uptr,
 		pid_t pid, int cpu, int group_fd, unsigned long flags);
 #endif
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 9d5078bd23a..8afac76cd74 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -377,7 +377,7 @@ struct tcp_sock {
 	unsigned int		keepalive_time;	  /* time before keep alive takes place */
 	unsigned int		keepalive_intvl;  /* time interval between keep alive probes */
 
-	unsigned long last_synq_overflow; 
+	int			linger2;
 
 /* Receiver side RTT estimation */
 	struct {
@@ -406,8 +406,6 @@ struct tcp_sock {
 /* TCP MD5 Signagure Option information */
 	struct tcp_md5sig_info	*md5sig_info;
 #endif
-
-	int			linger2;
 };
 
 static inline struct tcp_sock *tcp_sk(const struct sock *sk)
diff --git a/include/linux/tick.h b/include/linux/tick.h
index 469b82d88b3..0482229c07d 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -97,10 +97,12 @@ extern void tick_clock_notify(void);
 extern int tick_check_oneshot_change(int allow_nohz);
 extern struct tick_sched *tick_get_tick_sched(int cpu);
 extern void tick_check_idle(int cpu);
+extern int tick_oneshot_mode_active(void);
 # else
 static inline void tick_clock_notify(void) { }
 static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
 static inline void tick_check_idle(int cpu) { }
+static inline int tick_oneshot_mode_active(void) { return 0; }
 # endif
 
 #else /* CONFIG_GENERIC_CLOCKEVENTS */
@@ -109,6 +111,7 @@ static inline void tick_cancel_sched_timer(int cpu) { }
 static inline void tick_clock_notify(void) { }
 static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
 static inline void tick_check_idle(int cpu) { }
+static inline int tick_oneshot_mode_active(void) { return 0; }
 #endif /* !CONFIG_GENERIC_CLOCKEVENTS */
 
 # ifdef CONFIG_NO_HZ
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 6cdb6f3331f..ccf882eed8f 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -163,7 +163,10 @@ extern void add_timer_on(struct timer_list *timer, int cpu);
 extern int del_timer(struct timer_list * timer);
 extern int mod_timer(struct timer_list *timer, unsigned long expires);
 extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);
+extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires);
 
+#define TIMER_NOT_PINNED	0
+#define TIMER_PINNED		1
 /*
  * The jiffies value which is added to now, when there is no timer
  * in the timer wheel:
diff --git a/include/linux/timex.h b/include/linux/timex.h
index aa3475fcff6..9910e3bd5b3 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -170,17 +170,37 @@ struct timex {
 #include <asm/timex.h>
 
 /*
- * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
- * for a slightly underdamped convergence characteristic. SHIFT_KH
- * establishes the damping of the FLL and is chosen by wisdom and black
- * art.
+ * SHIFT_PLL is used as a dampening factor to define how much we
+ * adjust the frequency correction for a given offset in PLL mode.
+ * It also used in dampening the offset correction, to define how
+ * much of the current value in time_offset we correct for each
+ * second. Changing this value changes the stiffness of the ntp
+ * adjustment code. A lower value makes it more flexible, reducing
+ * NTP convergence time. A higher value makes it stiffer, increasing
+ * convergence time, but making the clock more stable.
  *
- * MAXTC establishes the maximum time constant of the PLL. With the
- * SHIFT_KG and SHIFT_KF values given and a time constant range from
- * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
- * respectively.
+ * In David Mills' nanokernel reference implementation SHIFT_PLL is 4.
+ * However this seems to increase convergence time much too long.
+ *
+ * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html
+ *
+ * In the above mailing list discussion, it seems the value of 4
+ * was appropriate for other Unix systems with HZ=100, and that
+ * SHIFT_PLL should be decreased as HZ increases. However, Linux's
+ * clock steering implementation is HZ independent.
+ *
+ * Through experimentation, a SHIFT_PLL value of 2 was found to allow
+ * for fast convergence (very similar to the NTPv3 code used prior to
+ * v2.6.19), with good clock stability.
+ *
+ *
+ * SHIFT_FLL is used as a dampening factor to define how much we
+ * adjust the frequency correction for a given offset in FLL mode.
+ * In David Mills' nanokernel reference implementation SHIFT_FLL is 2.
+ *
+ * MAXTC establishes the maximum time constant of the PLL.
  */
-#define SHIFT_PLL	4	/* PLL frequency factor (shift) */
+#define SHIFT_PLL	2	/* PLL frequency factor (shift) */
 #define SHIFT_FLL	2	/* FLL frequency factor (shift) */
 #define MAXTC		10	/* maximum time constant (shift) */
 
@@ -192,10 +212,10 @@ struct timex {
 #define SHIFT_USEC 16		/* frequency offset scale (shift) */
 #define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
 #define PPM_SCALE_INV_SHIFT 19
-#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
+#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
 		       PPM_SCALE + 1)
 
-#define MAXPHASE 500000000l	/* max phase error (ns) */
+#define MAXPHASE 500000000L	/* max phase error (ns) */
 #define MAXFREQ 500000		/* max frequency error (ns/s) */
 #define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
 #define MINSEC 256		/* min interval between updates (s) */
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
index 6b7703e75ce..71339dc531c 100644
--- a/include/linux/ultrasound.h
+++ b/include/linux/ultrasound.h
@@ -34,7 +34,7 @@
  *		_GUS_VOICEOFF	- Stops voice (no parameters)
  *		_GUS_VOICEFADE	- Stops the voice smoothly.
  *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
- *		_GUS_VOICEBALA	- Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
  *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
  *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
  *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 36fabb95c7d..5d44059f6d6 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -183,6 +183,7 @@ extern void usbnet_tx_timeout (struct net_device *net);
 extern int usbnet_change_mtu (struct net_device *net, int new_mtu);
 
 extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
 extern void usbnet_defer_kevent (struct usbnet *, int);
 extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
 extern void usbnet_unlink_rx_urbs(struct usbnet *);
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 06005fa9e98..4fca4f5440b 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -10,14 +10,17 @@
 
 /**
  * virtqueue - a queue to register buffers for sending or receiving.
+ * @list: the chain of virtqueues for this device
  * @callback: the function to call when buffers are consumed (can be NULL).
+ * @name: the name of this virtqueue (mainly for debugging)
  * @vdev: the virtio device this queue was created for.
  * @vq_ops: the operations for this virtqueue (see below).
  * @priv: a pointer for the virtqueue implementation to use.
  */
-struct virtqueue
-{
+struct virtqueue {
+	struct list_head list;
 	void (*callback)(struct virtqueue *vq);
+	const char *name;
 	struct virtio_device *vdev;
 	struct virtqueue_ops *vq_ops;
 	void *priv;
@@ -76,15 +79,16 @@ struct virtqueue_ops {
  * @dev: underlying device.
  * @id: the device type identification (used to match it with a driver).
  * @config: the configuration ops for this device.
+ * @vqs: the list of virtqueues for this device.
  * @features: the features supported by both driver and device.
  * @priv: private pointer for the driver's use.
  */
-struct virtio_device
-{
+struct virtio_device {
 	int index;
 	struct device dev;
 	struct virtio_device_id id;
 	struct virtio_config_ops *config;
+	struct list_head vqs;
 	/* Note that this is a Linux set_bit-style bitmap. */
 	unsigned long features[1];
 	void *priv;
@@ -99,8 +103,7 @@ void unregister_virtio_device(struct virtio_device *dev);
  * @id_table: the ids serviced by this driver.
  * @feature_table: an array of feature numbers supported by this device.
  * @feature_table_size: number of entries in the feature table array.
- * @probe: the function to call when a device is found.  Returns a token for
- *    remove, or PTR_ERR().
+ * @probe: the function to call when a device is found.  Returns 0 or -errno.
  * @remove: the function when a device is removed.
  * @config_changed: optional function to call when the device configuration
  *    changes; may be called in interrupt context.
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index bf8ec283b23..99f514575f6 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -29,6 +29,7 @@
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
 
 #ifdef __KERNEL__
+#include <linux/err.h>
 #include <linux/virtio.h>
 
 /**
@@ -49,15 +50,26 @@
  * @set_status: write the status byte
  *	vdev: the virtio_device
  *	status: the new status byte
+ * @request_vqs: request the specified number of virtqueues
+ *	vdev: the virtio_device
+ *	max_vqs: the max number of virtqueues we want
+ *      If supplied, must call before any virtqueues are instantiated.
+ *      To modify the max number of virtqueues after request_vqs has been
+ *      called, call free_vqs and then request_vqs with a new value.
+ * @free_vqs: cleanup resources allocated by request_vqs
+ *	vdev: the virtio_device
+ *      If supplied, must call after all virtqueues have been deleted.
  * @reset: reset the device
  *	vdev: the virtio device
  *	After this, status and feature negotiation must be done again
- * @find_vq: find a virtqueue and instantiate it.
+ * @find_vqs: find virtqueues and instantiate them.
  *	vdev: the virtio_device
- *	index: the 0-based virtqueue number in case there's more than one.
- *	callback: the virqtueue callback
- *	Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
- * @del_vq: free a virtqueue found by find_vq().
+ *	nvqs: the number of virtqueues to find
+ *	vqs: on success, includes new virtqueues
+ *	callbacks: array of callbacks, for each virtqueue
+ *	names: array of virtqueue names (mainly for debugging)
+ *	Returns 0 on success or error status
+ * @del_vqs: free virtqueues found by find_vqs().
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 32 feature bits (all we currently need).
@@ -66,6 +78,7 @@
  *	This gives the final feature bits for the device: it can change
  *	the dev->feature bits if it wants.
  */
+typedef void vq_callback_t(struct virtqueue *);
 struct virtio_config_ops
 {
 	void (*get)(struct virtio_device *vdev, unsigned offset,
@@ -75,10 +88,11 @@ struct virtio_config_ops
 	u8 (*get_status)(struct virtio_device *vdev);
 	void (*set_status)(struct virtio_device *vdev, u8 status);
 	void (*reset)(struct virtio_device *vdev);
-	struct virtqueue *(*find_vq)(struct virtio_device *vdev,
-				     unsigned index,
-				     void (*callback)(struct virtqueue *));
-	void (*del_vq)(struct virtqueue *vq);
+	int (*find_vqs)(struct virtio_device *, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[]);
+	void (*del_vqs)(struct virtio_device *);
 	u32 (*get_features)(struct virtio_device *vdev);
 	void (*finalize_features)(struct virtio_device *vdev);
 };
@@ -99,7 +113,9 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev,
 	if (__builtin_constant_p(fbit))
 		BUILD_BUG_ON(fbit >= 32);
 
-	virtio_check_driver_offered_feature(vdev, fbit);
+	if (fbit < VIRTIO_TRANSPORT_F_START)
+		virtio_check_driver_offered_feature(vdev, fbit);
+
 	return test_bit(fbit, vdev->features);
 }
 
@@ -126,5 +142,18 @@ static inline int virtio_config_buf(struct virtio_device *vdev,
 	vdev->config->get(vdev, offset, buf, len);
 	return 0;
 }
+
+static inline
+struct virtqueue *virtio_find_single_vq(struct virtio_device *vdev,
+					vq_callback_t *c, const char *n)
+{
+	vq_callback_t *callbacks[] = { c };
+	const char *names[] = { n };
+	struct virtqueue *vq;
+	int err = vdev->config->find_vqs(vdev, 1, &vq, callbacks, names);
+	if (err < 0)
+		return ERR_PTR(err);
+	return vq;
+}
 #endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
index cd0fd5d181a..9a3d7c48c62 100644
--- a/include/linux/virtio_pci.h
+++ b/include/linux/virtio_pci.h
@@ -47,9 +47,17 @@
 /* The bit of the ISR which indicates a device configuration change. */
 #define VIRTIO_PCI_ISR_CONFIG		0x2
 
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR        20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR         22
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
 /* The remaining space is defined by each driver as the per-driver
  * configuration space */
-#define VIRTIO_PCI_CONFIG		20
+#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
 
 /* Virtio ABI version, this must match exactly */
 #define VIRTIO_PCI_ABI_VERSION		0
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 71e03722fb5..693e0ec5afa 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -14,6 +14,8 @@
 #define VRING_DESC_F_NEXT	1
 /* This marks a buffer as write-only (otherwise read-only). */
 #define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
 
 /* The Host uses this in used->flags to advise the Guest: don't kick me when
  * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
@@ -24,6 +26,9 @@
  * optimization.  */
 #define VRING_AVAIL_F_NO_INTERRUPT	1
 
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
 struct vring_desc
 {
@@ -119,7 +124,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *vq),
-				      void (*callback)(struct virtqueue *vq));
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name);
 void vring_del_virtqueue(struct virtqueue *vq);
 /* Filter out transport-specific feature bits. */
 void vring_transport_features(struct virtio_device *vdev);
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
index c89de7f4e5b..4fdcc563551 100644
--- a/include/linux/wimax.h
+++ b/include/linux/wimax.h
@@ -59,7 +59,7 @@ enum {
 	 * M - Major: change if removing or modifying an existing call.
 	 * m - minor: change when adding a new call
 	 */
-	WIMAX_GNL_VERSION = 00,
+	WIMAX_GNL_VERSION = 01,
 	/* Generic NetLink attributes */
 	WIMAX_GNL_ATTR_INVALID = 0x00,
 	WIMAX_GNL_ATTR_MAX = 10,
@@ -78,6 +78,7 @@ enum {
 	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
 	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
 	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
+	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
 };
 
 
@@ -113,6 +114,10 @@ enum {
 	WIMAX_GNL_RESET_IFIDX = 1,
 };
 
+/* Atributes for wimax_state_get() */
+enum {
+	WIMAX_GNL_STGET_IFIDX = 1,
+};
 
 /*
  * Attributes for the Report State Change
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h
index d5148a7889a..433693ef2bb 100644
--- a/include/linux/wimax/i2400m.h
+++ b/include/linux/wimax/i2400m.h
@@ -266,7 +266,7 @@ enum i2400m_ro_type {
 
 /* Misc constants */
 enum {
-	I2400M_PL_PAD = 16,	/* Payload data size alignment */
+	I2400M_PL_ALIGN = 16,	/* Payload data size alignment */
 	I2400M_PL_SIZE_MAX = 0x3EFF,
 	I2400M_MAX_PLS_IN_MSG = 60,
 	/* protocol barkers: sync sequences; for notifications they
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 93445477f86..3224820c851 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -79,7 +79,6 @@ struct writeback_control {
 void writeback_inodes(struct writeback_control *wbc);
 int inode_wait(void *);
 void sync_inodes_sb(struct super_block *, int wait);
-void sync_inodes(int wait);
 
 /* writeback.h requires fs.h; it, too, is not included from here. */
 static inline void wait_on_inode(struct inode *inode)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 3ad5390a4dd..968166a45f8 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -81,12 +81,6 @@ enum {
 	BT_CLOSED
 };
 
-/* Endianness conversions */
-#define htobs(a)	__cpu_to_le16(a)
-#define htobl(a)	__cpu_to_le32(a)
-#define btohs(a)	__le16_to_cpu(a)
-#define btohl(a)	__le32_to_cpu(a)
-
 /* BD Address */
 typedef struct {
 	__u8 b[6];
@@ -171,15 +165,6 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long l
 	return skb;
 }
 
-static inline int skb_frags_no(struct sk_buff *skb)
-{
-	register struct sk_buff *frag = skb_shinfo(skb)->frag_list;
-	register int n = 1;
-
-	for (; frag; frag=frag->next, n++);
-	return n;
-}
-
 int bt_err(__u16 code);
 
 extern int hci_sock_init(void);
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 73aead222b3..c4ca4228b08 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -137,6 +137,8 @@ struct hci_dev {
 	struct device		*parent;
 	struct device		dev;
 
+	struct rfkill		*rfkill;
+
 	struct module 		*owner;
 
 	int (*open)(struct hci_dev *hdev);
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index f566aa1f0a4..e919fca1072 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -26,8 +26,13 @@
 #define __L2CAP_H
 
 /* L2CAP defaults */
-#define L2CAP_DEFAULT_MTU	672
-#define L2CAP_DEFAULT_FLUSH_TO	0xFFFF
+#define L2CAP_DEFAULT_MTU		672
+#define L2CAP_DEFAULT_FLUSH_TO		0xffff
+#define L2CAP_DEFAULT_RX_WINDOW		1
+#define L2CAP_DEFAULT_MAX_RECEIVE	1
+#define L2CAP_DEFAULT_RETRANS_TO	300    /* 300 milliseconds */
+#define L2CAP_DEFAULT_MONITOR_TO	1000   /* 1 second */
+#define L2CAP_DEFAULT_MAX_RX_APDU	0xfff7
 
 #define L2CAP_CONN_TIMEOUT	(40000) /* 40 seconds */
 #define L2CAP_INFO_TIMEOUT	(4000)  /*  4 seconds */
@@ -64,17 +69,29 @@ struct l2cap_conninfo {
 #define L2CAP_LM_SECURE		0x0020
 
 /* L2CAP command codes */
-#define L2CAP_COMMAND_REJ 0x01
-#define L2CAP_CONN_REQ    0x02
-#define L2CAP_CONN_RSP    0x03
-#define L2CAP_CONF_REQ    0x04
-#define L2CAP_CONF_RSP    0x05
-#define L2CAP_DISCONN_REQ 0x06
-#define L2CAP_DISCONN_RSP 0x07
-#define L2CAP_ECHO_REQ    0x08
-#define L2CAP_ECHO_RSP    0x09
-#define L2CAP_INFO_REQ    0x0a
-#define L2CAP_INFO_RSP    0x0b
+#define L2CAP_COMMAND_REJ	0x01
+#define L2CAP_CONN_REQ		0x02
+#define L2CAP_CONN_RSP		0x03
+#define L2CAP_CONF_REQ		0x04
+#define L2CAP_CONF_RSP		0x05
+#define L2CAP_DISCONN_REQ	0x06
+#define L2CAP_DISCONN_RSP	0x07
+#define L2CAP_ECHO_REQ		0x08
+#define L2CAP_ECHO_RSP		0x09
+#define L2CAP_INFO_REQ		0x0a
+#define L2CAP_INFO_RSP		0x0b
+
+/* L2CAP feature mask */
+#define L2CAP_FEAT_FLOWCTL	0x00000001
+#define L2CAP_FEAT_RETRANS	0x00000002
+#define L2CAP_FEAT_ERTM		0x00000008
+#define L2CAP_FEAT_STREAMING	0x00000010
+#define L2CAP_FEAT_FCS		0x00000020
+#define L2CAP_FEAT_FIXED_CHAN	0x00000080
+
+/* L2CAP checksum option */
+#define L2CAP_FCS_NONE		0x00
+#define L2CAP_FCS_CRC16		0x01
 
 /* L2CAP structures */
 struct l2cap_hdr {
@@ -106,17 +123,23 @@ struct l2cap_conn_rsp {
 	__le16     status;
 } __attribute__ ((packed));
 
+/* channel indentifier */
+#define L2CAP_CID_SIGNALING	0x0001
+#define L2CAP_CID_CONN_LESS	0x0002
+#define L2CAP_CID_DYN_START	0x0040
+#define L2CAP_CID_DYN_END	0xffff
+
 /* connect result */
-#define L2CAP_CR_SUCCESS    0x0000
-#define L2CAP_CR_PEND       0x0001
-#define L2CAP_CR_BAD_PSM    0x0002
-#define L2CAP_CR_SEC_BLOCK  0x0003
-#define L2CAP_CR_NO_MEM     0x0004
+#define L2CAP_CR_SUCCESS	0x0000
+#define L2CAP_CR_PEND		0x0001
+#define L2CAP_CR_BAD_PSM	0x0002
+#define L2CAP_CR_SEC_BLOCK	0x0003
+#define L2CAP_CR_NO_MEM		0x0004
 
 /* connect status */
-#define L2CAP_CS_NO_INFO      0x0000
-#define L2CAP_CS_AUTHEN_PEND  0x0001
-#define L2CAP_CS_AUTHOR_PEND  0x0002
+#define L2CAP_CS_NO_INFO	0x0000
+#define L2CAP_CS_AUTHEN_PEND	0x0001
+#define L2CAP_CS_AUTHOR_PEND	0x0002
 
 struct l2cap_conf_req {
 	__le16     dcid;
@@ -143,10 +166,14 @@ struct l2cap_conf_opt {
 } __attribute__ ((packed));
 #define L2CAP_CONF_OPT_SIZE	2
 
+#define L2CAP_CONF_HINT		0x80
+#define L2CAP_CONF_MASK		0x7f
+
 #define L2CAP_CONF_MTU		0x01
 #define L2CAP_CONF_FLUSH_TO	0x02
 #define L2CAP_CONF_QOS		0x03
 #define L2CAP_CONF_RFC		0x04
+#define L2CAP_CONF_FCS		0x05
 
 #define L2CAP_CONF_MAX_SIZE	22
 
@@ -162,6 +189,8 @@ struct l2cap_conf_rfc {
 #define L2CAP_MODE_BASIC	0x00
 #define L2CAP_MODE_RETRANS	0x01
 #define L2CAP_MODE_FLOWCTL	0x02
+#define L2CAP_MODE_ERTM		0x03
+#define L2CAP_MODE_STREAM	0x04
 
 struct l2cap_disconn_req {
 	__le16     dcid;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5389afdc129..1a21895b732 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1,71 +1,220 @@
 #ifndef __NET_CFG80211_H
 #define __NET_CFG80211_H
+/*
+ * 802.11 device and configuration interface
+ *
+ * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/list.h>
 #include <linux/netlink.h>
 #include <linux/skbuff.h>
 #include <linux/nl80211.h>
 #include <linux/if_ether.h>
 #include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/genetlink.h>
+#include <net/regulatory.h>
+
 /* remove once we remove the wext stuff */
 #include <net/iw_handler.h>
+#include <linux/wireless.h>
+
 
 /*
- * 802.11 configuration in-kernel interface
+ * wireless hardware capability structures
+ */
+
+/**
+ * enum ieee80211_band - supported frequency bands
+ *
+ * The bands are assigned this way because the supported
+ * bitrates differ in these bands.
  *
- * Copyright 2006, 2007	Johannes Berg <johannes@sipsolutions.net>
+ * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
+ * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
  */
+enum ieee80211_band {
+	IEEE80211_BAND_2GHZ,
+	IEEE80211_BAND_5GHZ,
+
+	/* keep last */
+	IEEE80211_NUM_BANDS
+};
 
 /**
- * struct vif_params - describes virtual interface parameters
- * @mesh_id: mesh ID to use
- * @mesh_id_len: length of the mesh ID
+ * enum ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * 	is not permitted.
+ * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * 	is not permitted.
  */
-struct vif_params {
-       u8 *mesh_id;
-       int mesh_id_len;
+enum ieee80211_channel_flags {
+	IEEE80211_CHAN_DISABLED		= 1<<0,
+	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
+	IEEE80211_CHAN_NO_IBSS		= 1<<2,
+	IEEE80211_CHAN_RADAR		= 1<<3,
+	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
+	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
 };
 
-/* Radiotap header iteration
- *   implemented in net/wireless/radiotap.c
- *   docs in Documentation/networking/radiotap-headers.txt
+#define IEEE80211_CHAN_NO_HT40 \
+	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+
+/**
+ * struct ieee80211_channel - channel definition
+ *
+ * This structure describes a single channel for use
+ * with cfg80211.
+ *
+ * @center_freq: center frequency in MHz
+ * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
+ * @hw_value: hardware-specific value for the channel
+ * @flags: channel flags from &enum ieee80211_channel_flags.
+ * @orig_flags: channel flags at registration time, used by regulatory
+ *	code to support devices with additional restrictions
+ * @band: band this channel belongs to.
+ * @max_antenna_gain: maximum antenna gain in dBi
+ * @max_power: maximum transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ *	has been found on this channel. Use regulatory_hint_found_beacon()
+ *	to enable this, this is is useful only on 5 GHz band.
+ * @orig_mag: internal use
+ * @orig_mpwr: internal use
  */
+struct ieee80211_channel {
+	enum ieee80211_band band;
+	u16 center_freq;
+	u8 max_bandwidth;
+	u16 hw_value;
+	u32 flags;
+	int max_antenna_gain;
+	int max_power;
+	bool beacon_found;
+	u32 orig_flags;
+	int orig_mag, orig_mpwr;
+};
+
 /**
- * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
- * @rtheader: pointer to the radiotap header we are walking through
- * @max_length: length of radiotap header in cpu byte ordering
- * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
- * @this_arg: pointer to current radiotap arg
- * @arg_index: internal next argument index
- * @arg: internal next argument pointer
- * @next_bitmap: internal pointer to next present u32
- * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * enum ieee80211_rate_flags - rate flags
+ *
+ * Hardware/specification flags for rates. These are structured
+ * in a way that allows using the same bitrate structure for
+ * different bands/PHY modes.
+ *
+ * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
+ *	preamble on this bitrate; only relevant in 2.4GHz band and
+ *	with CCK rates.
+ * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
+ *	when used with 802.11a (on the 5 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
+ *	when used with 802.11b (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
+ *	when used with 802.11g (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
  */
+enum ieee80211_rate_flags {
+	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
+	IEEE80211_RATE_MANDATORY_A	= 1<<1,
+	IEEE80211_RATE_MANDATORY_B	= 1<<2,
+	IEEE80211_RATE_MANDATORY_G	= 1<<3,
+	IEEE80211_RATE_ERP_G		= 1<<4,
+};
 
-struct ieee80211_radiotap_iterator {
-	struct ieee80211_radiotap_header *rtheader;
-	int max_length;
-	int this_arg_index;
-	u8 *this_arg;
+/**
+ * struct ieee80211_rate - bitrate definition
+ *
+ * This structure describes a bitrate that an 802.11 PHY can
+ * operate with. The two values @hw_value and @hw_value_short
+ * are only for driver use when pointers to this structure are
+ * passed around.
+ *
+ * @flags: rate-specific flags
+ * @bitrate: bitrate in units of 100 Kbps
+ * @hw_value: driver/hardware value for this rate
+ * @hw_value_short: driver/hardware value for this rate when
+ *	short preamble is used
+ */
+struct ieee80211_rate {
+	u32 flags;
+	u16 bitrate;
+	u16 hw_value, hw_value_short;
+};
 
-	int arg_index;
-	u8 *arg;
-	__le32 *next_bitmap;
-	u32 bitmap_shifter;
+/**
+ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+ * @mcs: Supported MCS rates
+ */
+struct ieee80211_sta_ht_cap {
+	u16 cap; /* use IEEE80211_HT_CAP_ */
+	bool ht_supported;
+	u8 ampdu_factor;
+	u8 ampdu_density;
+	struct ieee80211_mcs_info mcs;
 };
 
-extern int ieee80211_radiotap_iterator_init(
-   struct ieee80211_radiotap_iterator *iterator,
-   struct ieee80211_radiotap_header *radiotap_header,
-   int max_length);
+/**
+ * struct ieee80211_supported_band - frequency band definition
+ *
+ * This structure describes a frequency band a wiphy
+ * is able to operate in.
+ *
+ * @channels: Array of channels the hardware can operate in
+ *	in this band.
+ * @band: the band this structure represents
+ * @n_channels: Number of channels in @channels
+ * @bitrates: Array of bitrates the hardware can operate with
+ *	in this band. Must be sorted to give a valid "supported
+ *	rates" IE, i.e. CCK rates first, then OFDM.
+ * @n_bitrates: Number of bitrates in @bitrates
+ */
+struct ieee80211_supported_band {
+	struct ieee80211_channel *channels;
+	struct ieee80211_rate *bitrates;
+	enum ieee80211_band band;
+	int n_channels;
+	int n_bitrates;
+	struct ieee80211_sta_ht_cap ht_cap;
+};
 
-extern int ieee80211_radiotap_iterator_next(
-   struct ieee80211_radiotap_iterator *iterator);
+/*
+ * Wireless hardware/device configuration structures and methods
+ */
 
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @mesh_id: mesh ID to use
+ * @mesh_id_len: length of the mesh ID
+ */
+struct vif_params {
+       u8 *mesh_id;
+       int mesh_id_len;
+};
 
- /**
+/**
  * struct key_params - key information
  *
  * Information about a key
@@ -106,27 +255,6 @@ struct beacon_parameters {
 };
 
 /**
- * enum station_flags - station flags
- *
- * Station capability flags. Note that these must be the bits
- * according to the nl80211 flags.
- *
- * @STATION_FLAG_CHANGED: station flags were changed
- * @STATION_FLAG_AUTHORIZED: station is authorized to send frames (802.1X)
- * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- *	with short preambles
- * @STATION_FLAG_WME: station is WME/QoS capable
- * @STATION_FLAG_MFP: station uses management frame protection
- */
-enum station_flags {
-	STATION_FLAG_CHANGED		= 1<<0,
-	STATION_FLAG_AUTHORIZED		= 1<<NL80211_STA_FLAG_AUTHORIZED,
-	STATION_FLAG_SHORT_PREAMBLE	= 1<<NL80211_STA_FLAG_SHORT_PREAMBLE,
-	STATION_FLAG_WME		= 1<<NL80211_STA_FLAG_WME,
-	STATION_FLAG_MFP		= 1<<NL80211_STA_FLAG_MFP,
-};
-
-/**
  * enum plink_action - actions to perform in mesh peers
  *
  * @PLINK_ACTION_INVALID: action 0 is reserved
@@ -148,14 +276,17 @@ enum plink_actions {
  * @supported_rates: supported rates in IEEE 802.11 format
  *	(or NULL for no change)
  * @supported_rates_len: number of supported rates
- * @station_flags: station flags (see &enum station_flags)
+ * @sta_flags_mask: station flags that changed
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
+ * @sta_flags_set: station flags values
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
  * @listen_interval: listen interval or -1 for no change
  * @aid: AID or zero for no change
  */
 struct station_parameters {
 	u8 *supported_rates;
 	struct net_device *vlan;
-	u32 station_flags;
+	u32 sta_flags_mask, sta_flags_set;
 	int listen_interval;
 	u16 aid;
 	u8 supported_rates_len;
@@ -348,92 +479,6 @@ struct bss_parameters {
 	u8 basic_rates_len;
 };
 
-/**
- * enum environment_cap - Environment parsed from country IE
- * @ENVIRON_ANY: indicates country IE applies to both indoor and
- *	outdoor operation.
- * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
- * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
- */
-enum environment_cap {
-	ENVIRON_ANY,
-	ENVIRON_INDOOR,
-	ENVIRON_OUTDOOR,
-};
-
-/**
- * struct regulatory_request - used to keep track of regulatory requests
- *
- * @wiphy_idx: this is set if this request's initiator is
- * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
- * 	can be used by the wireless core to deal with conflicts
- * 	and potentially inform users of which devices specifically
- * 	cased the conflicts.
- * @initiator: indicates who sent this request, could be any of
- * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
- * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
- * 	regulatory domain. We have a few special codes:
- * 	00 - World regulatory domain
- * 	99 - built by driver but a specific alpha2 cannot be determined
- * 	98 - result of an intersection between two regulatory domains
- * @intersect: indicates whether the wireless core should intersect
- * 	the requested regulatory domain with the presently set regulatory
- * 	domain.
- * @country_ie_checksum: checksum of the last processed and accepted
- * 	country IE
- * @country_ie_env: lets us know if the AP is telling us we are outdoor,
- * 	indoor, or if it doesn't matter
- * @list: used to insert into the reg_requests_list linked list
- */
-struct regulatory_request {
-	int wiphy_idx;
-	enum nl80211_reg_initiator initiator;
-	char alpha2[2];
-	bool intersect;
-	u32 country_ie_checksum;
-	enum environment_cap country_ie_env;
-	struct list_head list;
-};
-
-struct ieee80211_freq_range {
-	u32 start_freq_khz;
-	u32 end_freq_khz;
-	u32 max_bandwidth_khz;
-};
-
-struct ieee80211_power_rule {
-	u32 max_antenna_gain;
-	u32 max_eirp;
-};
-
-struct ieee80211_reg_rule {
-	struct ieee80211_freq_range freq_range;
-	struct ieee80211_power_rule power_rule;
-	u32 flags;
-};
-
-struct ieee80211_regdomain {
-	u32 n_reg_rules;
-	char alpha2[2];
-	struct ieee80211_reg_rule reg_rules[];
-};
-
-#define MHZ_TO_KHZ(freq) ((freq) * 1000)
-#define KHZ_TO_MHZ(freq) ((freq) / 1000)
-#define DBI_TO_MBI(gain) ((gain) * 100)
-#define MBI_TO_DBI(gain) ((gain) / 100)
-#define DBM_TO_MBM(gain) ((gain) * 100)
-#define MBM_TO_DBM(gain) ((gain) / 100)
-
-#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
-	.freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
-	.freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
-	.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
-	.power_rule.max_antenna_gain = DBI_TO_MBI(gain), \
-	.power_rule.max_eirp = DBM_TO_MBM(eirp), \
-	.flags = reg_flags, \
-	}
-
 struct mesh_config {
 	/* Timeouts in ms */
 	/* Mesh plink management parameters */
@@ -504,7 +549,7 @@ struct cfg80211_scan_request {
 	int n_ssids;
 	struct ieee80211_channel **channels;
 	u32 n_channels;
-	u8 *ie;
+	const u8 *ie;
 	size_t ie_len;
 
 	/* internal */
@@ -612,6 +657,11 @@ struct cfg80211_auth_request {
  * @ssid_len: Length of ssid in octets
  * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
  * @ie_len: Length of ie buffer in octets
+ * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ *	required to assume that the port is unauthorized until authorized by
+ *	user space. Otherwise, port is marked authorized by default.
  */
 struct cfg80211_assoc_request {
 	struct ieee80211_channel *chan;
@@ -620,6 +670,8 @@ struct cfg80211_assoc_request {
 	size_t ssid_len;
 	const u8 *ie;
 	size_t ie_len;
+	bool use_mfp;
+	bool control_port;
 };
 
 /**
@@ -659,6 +711,60 @@ struct cfg80211_disassoc_request {
 };
 
 /**
+ * struct cfg80211_ibss_params - IBSS parameters
+ *
+ * This structure defines the IBSS parameters for the join_ibss()
+ * method.
+ *
+ * @ssid: The SSID, will always be non-null.
+ * @ssid_len: The length of the SSID, will always be non-zero.
+ * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
+ *	search for IBSSs with a different BSSID.
+ * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_fixed: The channel should be fixed -- do not search for
+ *	IBSSs to join on other channels.
+ * @ie: information element(s) to include in the beacon
+ * @ie_len: length of that
+ * @beacon_interval: beacon interval to use
+ */
+struct cfg80211_ibss_params {
+	u8 *ssid;
+	u8 *bssid;
+	struct ieee80211_channel *channel;
+	u8 *ie;
+	u8 ssid_len, ie_len;
+	u16 beacon_interval;
+	bool channel_fixed;
+};
+
+/**
+ * enum wiphy_params_flags - set_wiphy_params bitfield values
+ * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
+ * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
+ * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
+ * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
+ */
+enum wiphy_params_flags {
+	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
+	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
+	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
+	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
+};
+
+/**
+ * enum tx_power_setting - TX power adjustment
+ *
+ * @TX_POWER_AUTOMATIC: the dbm parameter is ignored
+ * @TX_POWER_LIMITED: limit TX power by the dbm parameter
+ * @TX_POWER_FIXED: fix TX power to the dbm parameter
+ */
+enum tx_power_setting {
+	TX_POWER_AUTOMATIC,
+	TX_POWER_LIMITED,
+	TX_POWER_FIXED,
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -688,10 +794,11 @@ struct cfg80211_disassoc_request {
  * @get_key: get information about the key with the given parameters.
  *	@mac_addr will be %NULL when requesting information for a group
  *	key. All pointers given to the @callback function need not be valid
- *	after it returns.
+ *	after it returns. This function should return an error if it is
+ *	not possible to retrieve the key, -ENOENT if it doesn't exist.
  *
  * @del_key: remove a key given the @mac_addr (%NULL for a group key)
- *	and @key_index
+ *	and @key_index, return -ENOENT if the key doesn't exist.
  *
  * @set_default_key: set the default key on an interface
  *
@@ -733,6 +840,23 @@ struct cfg80211_disassoc_request {
  * @assoc: Request to (re)associate with the specified peer
  * @deauth: Request to deauthenticate from the specified peer
  * @disassoc: Request to disassociate from the specified peer
+ *
+ * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
+ *	cfg80211_ibss_joined(), also call that function when changing BSSID due
+ *	to a merge.
+ * @leave_ibss: Leave the IBSS.
+ *
+ * @set_wiphy_params: Notify that wiphy parameters have changed;
+ *	@changed bitfield (see &enum wiphy_params_flags) describes which values
+ *	have changed. The actual parameter values are available in
+ *	struct wiphy. If returning an error, no value should be changed.
+ *
+ * @set_tx_power: set the transmit power according to the parameters
+ * @get_tx_power: store the current TX power into the dbm variable;
+ *	return 0 if successful
+ *
+ * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
+ *	functions to adjust rfkill hw state
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy);
@@ -747,13 +871,13 @@ struct cfg80211_ops {
 				       struct vif_params *params);
 
 	int	(*add_key)(struct wiphy *wiphy, struct net_device *netdev,
-			   u8 key_index, u8 *mac_addr,
+			   u8 key_index, const u8 *mac_addr,
 			   struct key_params *params);
 	int	(*get_key)(struct wiphy *wiphy, struct net_device *netdev,
-			   u8 key_index, u8 *mac_addr, void *cookie,
+			   u8 key_index, const u8 *mac_addr, void *cookie,
 			   void (*callback)(void *cookie, struct key_params*));
 	int	(*del_key)(struct wiphy *wiphy, struct net_device *netdev,
-			   u8 key_index, u8 *mac_addr);
+			   u8 key_index, const u8 *mac_addr);
 	int	(*set_default_key)(struct wiphy *wiphy,
 				   struct net_device *netdev,
 				   u8 key_index);
@@ -818,9 +942,473 @@ struct cfg80211_ops {
 			  struct cfg80211_deauth_request *req);
 	int	(*disassoc)(struct wiphy *wiphy, struct net_device *dev,
 			    struct cfg80211_disassoc_request *req);
+
+	int	(*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
+			     struct cfg80211_ibss_params *params);
+	int	(*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
+
+	int	(*set_tx_power)(struct wiphy *wiphy,
+				enum tx_power_setting type, int dbm);
+	int	(*get_tx_power)(struct wiphy *wiphy, int *dbm);
+
+	void	(*rfkill_poll)(struct wiphy *wiphy);
 };
 
-/* temporary wext handlers */
+/*
+ * wireless hardware and networking interfaces structures
+ * and registration/helper functions
+ */
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
+ * @custom_regulatory: tells us the driver for this device
+ * 	has its own custom regulatory domain and cannot identify the
+ * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ * 	we will disregard the first regulatory hint (when the
+ * 	initiator is %REGDOM_SET_BY_CORE).
+ * @strict_regulatory: tells us the driver for this device will ignore
+ * 	regulatory domain settings until it gets its own regulatory domain
+ * 	via its regulatory_hint(). After its gets its own regulatory domain
+ * 	it will only allow further regulatory domain settings to further
+ * 	enhance compliance. For example if channel 13 and 14 are disabled
+ * 	by this regulatory domain no user regulatory domain can enable these
+ * 	channels at a later time. This can be used for devices which do not
+ * 	have calibration information gauranteed for frequencies or settings
+ * 	outside of its regulatory domain.
+ * @reg_notifier: the driver's regulatory notification callback
+ * @regd: the driver's regulatory domain, if one was requested via
+ * 	the regulatory_hint() API. This can be used by the driver
+ *	on the reg_notifier() if it chooses to ignore future
+ *	regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
+ * @cipher_suites: supported cipher suites
+ * @n_cipher_suites: number of supported cipher suites
+ * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
+ * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
+ * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
+ *	-1 = fragmentation disabled, only odd values >= 256 used
+ * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ */
+struct wiphy {
+	/* assign these fields before you register the wiphy */
+
+	/* permanent MAC address */
+	u8 perm_addr[ETH_ALEN];
+
+	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+	u16 interface_modes;
+
+	bool custom_regulatory;
+	bool strict_regulatory;
+
+	enum cfg80211_signal_type signal_type;
+
+	int bss_priv_size;
+	u8 max_scan_ssids;
+	u16 max_scan_ie_len;
+
+	int n_cipher_suites;
+	const u32 *cipher_suites;
+
+	u8 retry_short;
+	u8 retry_long;
+	u32 frag_threshold;
+	u32 rts_threshold;
+
+	/* If multiple wiphys are registered and you're handed e.g.
+	 * a regular netdev with assigned ieee80211_ptr, you won't
+	 * know whether it points to a wiphy your driver has registered
+	 * or not. Assign this to something global to your driver to
+	 * help determine whether you own this wiphy or not. */
+	const void *privid;
+
+	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+
+	/* Lets us get back the wiphy on the callback */
+	int (*reg_notifier)(struct wiphy *wiphy,
+			    struct regulatory_request *request);
+
+	/* fields below are read-only, assigned by cfg80211 */
+
+	const struct ieee80211_regdomain *regd;
+
+	/* the item in /sys/class/ieee80211/ points to this,
+	 * you need use set_wiphy_dev() (see below) */
+	struct device dev;
+
+	/* dir in debugfs: ieee80211/<wiphyname> */
+	struct dentry *debugfsdir;
+
+	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+/**
+ * wiphy_priv - return priv from wiphy
+ *
+ * @wiphy: the wiphy whose priv pointer to return
+ */
+static inline void *wiphy_priv(struct wiphy *wiphy)
+{
+	BUG_ON(!wiphy);
+	return &wiphy->priv;
+}
+
+/**
+ * set_wiphy_dev - set device pointer for wiphy
+ *
+ * @wiphy: The wiphy whose device to bind
+ * @dev: The device to parent it to
+ */
+static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
+{
+	wiphy->dev.parent = dev;
+}
+
+/**
+ * wiphy_dev - get wiphy dev pointer
+ *
+ * @wiphy: The wiphy whose device struct to look up
+ */
+static inline struct device *wiphy_dev(struct wiphy *wiphy)
+{
+	return wiphy->dev.parent;
+}
+
+/**
+ * wiphy_name - get wiphy name
+ *
+ * @wiphy: The wiphy whose name to return
+ */
+static inline const char *wiphy_name(struct wiphy *wiphy)
+{
+	return dev_name(&wiphy->dev);
+}
+
+/**
+ * wiphy_new - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * The returned pointer must be assigned to each netdev's
+ * ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+
+/**
+ * wiphy_register - register a wiphy with cfg80211
+ *
+ * @wiphy: The wiphy to register.
+ *
+ * Returns a non-negative wiphy index or a negative error code.
+ */
+extern int wiphy_register(struct wiphy *wiphy);
+
+/**
+ * wiphy_unregister - deregister a wiphy from cfg80211
+ *
+ * @wiphy: The wiphy to unregister.
+ *
+ * After this call, no more requests can be made with this priv
+ * pointer, but the call may sleep to wait for an outstanding
+ * request that is being handled.
+ */
+extern void wiphy_unregister(struct wiphy *wiphy);
+
+/**
+ * wiphy_free - free wiphy
+ *
+ * @wiphy: The wiphy to free
+ */
+extern void wiphy_free(struct wiphy *wiphy);
+
+/**
+ * struct wireless_dev - wireless per-netdev state
+ *
+ * This structure must be allocated by the driver/stack
+ * that uses the ieee80211_ptr field in struct net_device
+ * (this is intentional so it can be allocated along with
+ * the netdev.)
+ *
+ * @wiphy: pointer to hardware description
+ * @iftype: interface type
+ * @list: (private) Used to collect the interfaces
+ * @netdev: (private) Used to reference back to the netdev
+ * @current_bss: (private) Used by the internal configuration code
+ * @bssid: (private) Used by the internal configuration code
+ * @ssid: (private) Used by the internal configuration code
+ * @ssid_len: (private) Used by the internal configuration code
+ * @wext: (private) Used by the internal wireless extensions compat code
+ * @wext_bssid: (private) Used by the internal wireless extensions compat code
+ */
+struct wireless_dev {
+	struct wiphy *wiphy;
+	enum nl80211_iftype iftype;
+
+	/* private to the generic wireless code */
+	struct list_head list;
+	struct net_device *netdev;
+
+	/* currently used for IBSS - might be rearranged in the future */
+	struct cfg80211_bss *current_bss;
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len;
+
+#ifdef CONFIG_WIRELESS_EXT
+	/* wext data */
+	struct {
+		struct cfg80211_ibss_params ibss;
+		u8 bssid[ETH_ALEN];
+		s8 default_key, default_mgmt_key;
+	} wext;
+#endif
+};
+
+/**
+ * wdev_priv - return wiphy priv from wireless_dev
+ *
+ * @wdev: The wireless device whose wiphy's priv pointer to return
+ */
+static inline void *wdev_priv(struct wireless_dev *wdev)
+{
+	BUG_ON(!wdev);
+	return wiphy_priv(wdev->wiphy);
+}
+
+/*
+ * Utility functions
+ */
+
+/**
+ * ieee80211_channel_to_frequency - convert channel number to frequency
+ */
+extern int ieee80211_channel_to_frequency(int chan);
+
+/**
+ * ieee80211_frequency_to_channel - convert frequency to channel number
+ */
+extern int ieee80211_frequency_to_channel(int freq);
+
+/*
+ * Name indirection necessary because the ieee80211 code also has
+ * a function named "ieee80211_get_channel", so if you include
+ * cfg80211's header file you get cfg80211's version, if you try
+ * to include both header files you'll (rightfully!) get a symbol
+ * clash.
+ */
+extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
+							 int freq);
+/**
+ * ieee80211_get_channel - get channel struct from wiphy for specified frequency
+ */
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+	return __ieee80211_get_channel(wiphy, freq);
+}
+
+/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+			    u32 basic_rates, int bitrate);
+
+/*
+ * Radiotap parsing functions -- for controlled injection support
+ *
+ * Implemented in net/wireless/radiotap.c
+ * Documentation in Documentation/networking/radiotap-headers.txt
+ */
+
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @rtheader: pointer to the radiotap header we are walking through
+ * @max_length: length of radiotap header in cpu byte ordering
+ * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
+ * @this_arg: pointer to current radiotap arg
+ * @arg_index: internal next argument index
+ * @arg: internal next argument pointer
+ * @next_bitmap: internal pointer to next present u32
+ * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ */
+
+struct ieee80211_radiotap_iterator {
+	struct ieee80211_radiotap_header *rtheader;
+	int max_length;
+	int this_arg_index;
+	u8 *this_arg;
+
+	int arg_index;
+	u8 *arg;
+	__le32 *next_bitmap;
+	u32 bitmap_shifter;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+   struct ieee80211_radiotap_iterator *iterator,
+   struct ieee80211_radiotap_header *radiotap_header,
+   int max_length);
+
+extern int ieee80211_radiotap_iterator_next(
+   struct ieee80211_radiotap_iterator *iterator);
+
+extern const unsigned char rfc1042_header[6];
+extern const unsigned char bridge_tunnel_header[6];
+
+/**
+ * ieee80211_get_hdrlen_from_skb - get header length from data
+ *
+ * Given an skb with a raw 802.11 header at the data pointer this function
+ * returns the 802.11 header length in bytes (not including encryption
+ * headers). If the data in the sk_buff is too short to contain a valid 802.11
+ * header the function returns 0.
+ *
+ * @skb: the frame
+ */
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+
+/**
+ * ieee80211_hdrlen - get header length in bytes from frame control
+ * @fc: frame control field in little-endian format
+ */
+unsigned int ieee80211_hdrlen(__le16 fc);
+
+/**
+ * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
+ * @skb: the 802.11 data frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ */
+int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr,
+			   enum nl80211_iftype iftype);
+
+/**
+ * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
+ * @skb: the 802.3 frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ * @bssid: the network bssid (used only for iftype STATION and ADHOC)
+ * @qos: build 802.11 QoS data frame
+ */
+int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr,
+			     enum nl80211_iftype iftype, u8 *bssid, bool qos);
+
+/**
+ * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
+ * @skb: the data frame
+ */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb);
+
+/*
+ * Regulatory helper functions for wiphys
+ */
+
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ *	conflicts)
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ * 	should be in. If @rd is set this should be NULL. Note that if you
+ * 	set this to NULL you should still set rd->alpha2 to some accepted
+ * 	alpha2.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
+ */
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+
+/**
+ * regulatory_hint_11d - hints a country IE as a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ *	conflicts)
+ * @country_ie: pointer to the country IE
+ * @country_ie_len: length of the country IE
+ *
+ * We will intersect the rd with the what CRDA tells us should apply
+ * for the alpha2 this country IE belongs to, this prevents APs from
+ * sending us incorrect or outdated information against a country.
+ */
+extern void regulatory_hint_11d(struct wiphy *wiphy,
+				u8 *country_ie,
+				u8 country_ie_len);
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+	struct wiphy *wiphy,
+	const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @desired_bw_khz: the desired max bandwidth you want to use per
+ *	channel. Note that this is still 20 MHz if you want to use HT40
+ *	as HT40 makes use of two channels for its 40 MHz width bandwidth.
+ *	If set to 0 we'll assume you want the standard 20 MHz.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy,
+			 u32 center_freq,
+			 u32 desired_bw_khz,
+			 const struct ieee80211_reg_rule **reg_rule);
+
+/*
+ * Temporary wext handlers & helper functions
+ *
+ * In the future cfg80211 will simply assign the entire wext handler
+ * structure to netdevs it manages, but we're not there yet.
+ */
 int cfg80211_wext_giwname(struct net_device *dev,
 			  struct iw_request_info *info,
 			  char *name, char *extra);
@@ -834,9 +1422,72 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 int cfg80211_wext_giwscan(struct net_device *dev,
 			  struct iw_request_info *info,
 			  struct iw_point *data, char *extra);
+int cfg80211_wext_siwmlme(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra);
 int cfg80211_wext_giwrange(struct net_device *dev,
 			   struct iw_request_info *info,
 			   struct iw_point *data, char *extra);
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra);
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra);
+
+struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
+					     struct iw_freq *freq);
+
+int cfg80211_wext_siwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_giwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_siwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_giwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_siwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra);
+int cfg80211_wext_giwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra);
+int cfg80211_wext_siwencodeext(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *erq, char *extra);
+int cfg80211_wext_siwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf);
+int cfg80211_wext_giwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf);
+int cfg80211_wext_siwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *keybuf);
+int cfg80211_wext_giwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *keybuf);
+
+/*
+ * callbacks for asynchronous cfg80211 methods, notification
+ * functions and BSS handling helpers
+ */
 
 /**
  * cfg80211_scan_done - notify that scan finished
@@ -864,6 +1515,14 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
 			  struct ieee80211_mgmt *mgmt, size_t len,
 			  s32 signal, gfp_t gfp);
 
+struct cfg80211_bss*
+cfg80211_inform_bss(struct wiphy *wiphy,
+		    struct ieee80211_channel *channel,
+		    const u8 *bssid,
+		    u64 timestamp, u16 capability, u16 beacon_interval,
+		    const u8 *ie, size_t ielen,
+		    s32 signal, gfp_t gfp);
+
 struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 				      struct ieee80211_channel *channel,
 				      const u8 *bssid,
@@ -883,6 +1542,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
 				       const u8 *meshid, size_t meshidlen,
 				       const u8 *meshcfg);
 void cfg80211_put_bss(struct cfg80211_bss *bss);
+
 /**
  * cfg80211_unlink_bss - unlink BSS from internal data structures
  * @wiphy: the wiphy
@@ -902,44 +1562,62 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
  * @len: length of the frame data
  *
  * This function is called whenever an authentication has been processed in
- * station mode.
+ * station mode. The driver is required to call either this function or
+ * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
+ * call.
  */
 void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
+ * cfg80211_send_auth_timeout - notification of timed out authentication
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ */
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+
+/**
  * cfg80211_send_rx_assoc - notification of processed association
  * @dev: network device
  * @buf: (re)association response frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever a (re)association response has been
- * processed in station mode.
+ * processed in station mode. The driver is required to call either this
+ * function or cfg80211_send_assoc_timeout() to indicate the result of
+ * cfg80211_ops::assoc() call.
  */
 void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
- * cfg80211_send_rx_deauth - notification of processed deauthentication
+ * cfg80211_send_assoc_timeout - notification of timed out association
+ * @dev: network device
+ * @addr: The MAC address of the device with which the association timed out
+ */
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_deauth - notification of processed deauthentication
  * @dev: network device
  * @buf: deauthentication frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever deauthentication has been processed in
- * station mode.
+ * station mode. This includes both received deauthentication frames and
+ * locally generated ones.
  */
-void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf,
-			     size_t len);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
- * cfg80211_send_rx_disassoc - notification of processed disassociation
+ * cfg80211_send_disassoc - notification of processed disassociation
  * @dev: network device
  * @buf: disassociation response frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever disassociation has been processed in
- * station mode.
+ * station mode. This includes both received disassociation frames and locally
+ * generated ones.
  */
-void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf,
-			       size_t len);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
  * cfg80211_hold_bss - exclude bss from expiration
@@ -958,4 +1636,55 @@ void cfg80211_hold_bss(struct cfg80211_bss *bss);
  */
 void cfg80211_unhold_bss(struct cfg80211_bss *bss);
 
+/**
+ * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
+ * @dev: network device
+ * @addr: The source MAC address of the frame
+ * @key_type: The key type that the received frame used
+ * @key_id: Key identifier (0..3)
+ * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ *
+ * This function is called whenever the local MAC detects a MIC failure in a
+ * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
+ * primitive.
+ */
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+				  enum nl80211_key_type key_type, int key_id,
+				  const u8 *tsc);
+
+/**
+ * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the IBSS joined
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the device joined an IBSS or
+ * switched to a different BSSID. Before this function can be called,
+ * either a beacon has to have been received from the IBSS, or one of
+ * the cfg80211_inform_bss{,_frame} functions must have been called
+ * with the locally generated beacon -- this guarantees that there is
+ * always a scan result for this IBSS. cfg80211 will handle the rest.
+ */
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+
+/**
+ * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
+ * @wiphy: the wiphy
+ * @blocked: block status
+ */
+void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
+
+/**
+ * wiphy_rfkill_start_polling - start polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_start_polling(struct wiphy *wiphy);
+
+/**
+ * wiphy_rfkill_stop_polling - stop polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+
 #endif /* __NET_CFG80211_H */
diff --git a/include/net/dst.h b/include/net/dst.h
index 6be3b082a07..7fc409c19b3 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -195,6 +195,12 @@ struct dst_entry * dst_clone(struct dst_entry * dst)
 }
 
 extern void dst_release(struct dst_entry *dst);
+static inline void skb_dst_drop(struct sk_buff *skb)
+{
+	if (skb->_skb_dst)
+		dst_release(skb_dst(skb));
+	skb->_skb_dst = 0UL;
+}
 
 /* Children define the path of the packet through the
  * Linux networking.  Thus, destinations are stackable.
@@ -246,7 +252,7 @@ static inline void dst_negative_advice(struct dst_entry **dst_p)
 
 static inline void dst_link_failure(struct sk_buff *skb)
 {
-	struct dst_entry * dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	if (dst && dst->ops && dst->ops->link_failure)
 		dst->ops->link_failure(skb);
 }
@@ -265,13 +271,13 @@ static inline void dst_set_expires(struct dst_entry *dst, int timeout)
 /* Output packet to network from transport.  */
 static inline int dst_output(struct sk_buff *skb)
 {
-	return skb->dst->output(skb);
+	return skb_dst(skb)->output(skb);
 }
 
 /* Input packet from network to transport.  */
 static inline int dst_input(struct sk_buff *skb)
 {
-	return skb->dst->input(skb);
+	return skb_dst(skb)->input(skb);
 }
 
 static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index c2bb5cae651..ca4b2e84007 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -48,14 +48,12 @@ struct fib_rules_ops
 					 struct flowi *, int);
 	int			(*configure)(struct fib_rule *,
 					     struct sk_buff *,
-					     struct nlmsghdr *,
 					     struct fib_rule_hdr *,
 					     struct nlattr **);
 	int			(*compare)(struct fib_rule *,
 					   struct fib_rule_hdr *,
 					   struct nlattr **);
 	int			(*fill)(struct fib_rule *, struct sk_buff *,
-					struct nlmsghdr *,
 					struct fib_rule_hdr *);
 	u32			(*default_pref)(struct fib_rules_ops *ops);
 	size_t			(*nlmsg_payload)(struct fib_rule *);
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 747c255d1df..1b0e3ee4ddd 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -88,6 +88,8 @@ struct genl_ops
 };
 
 extern int genl_register_family(struct genl_family *family);
+extern int genl_register_family_with_ops(struct genl_family *family,
+	struct genl_ops *ops, size_t n_ops);
 extern int genl_unregister_family(struct genl_family *family);
 extern int genl_register_ops(struct genl_family *, struct genl_ops *ops);
 extern int genl_unregister_ops(struct genl_family *, struct genl_ops *ops);
diff --git a/include/net/ieee802154/af_ieee802154.h b/include/net/ieee802154/af_ieee802154.h
new file mode 100644
index 00000000000..0d78605fb1a
--- /dev/null
+++ b/include/net/ieee802154/af_ieee802154.h
@@ -0,0 +1,60 @@
+/*
+ * IEEE 802.15.4 inteface for userspace
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef _AF_IEEE802154_H
+#define _AF_IEEE802154_H
+
+#include <linux/socket.h> /* for sa_family_t */
+
+enum {
+	IEEE802154_ADDR_NONE = 0x0,
+	/* RESERVED = 0x01, */
+	IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */
+	IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */
+};
+
+/* address length, octets */
+#define IEEE802154_ADDR_LEN	8
+
+struct ieee802154_addr {
+	int addr_type;
+	u16 pan_id;
+	union {
+		u8 hwaddr[IEEE802154_ADDR_LEN];
+		u16 short_addr;
+	};
+};
+
+#define IEEE802154_PANID_BROADCAST	0xffff
+#define IEEE802154_ADDR_BROADCAST	0xffff
+#define IEEE802154_ADDR_UNDEF		0xfffe
+
+struct sockaddr_ieee802154 {
+	sa_family_t family; /* AF_IEEE802154 */
+	struct ieee802154_addr addr;
+};
+
+/* master device */
+#define IEEE802154_SIOC_ADD_SLAVE		(SIOCDEVPRIVATE + 0)
+
+#endif
diff --git a/include/net/ieee802154/mac_def.h b/include/net/ieee802154/mac_def.h
new file mode 100644
index 00000000000..8cb68463565
--- /dev/null
+++ b/include/net/ieee802154/mac_def.h
@@ -0,0 +1,160 @@
+/*
+ * IEEE802.15.4-2003 specification
+ *
+ * Copyright (C) 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef IEEE802154_MAC_DEF_H
+#define IEEE802154_MAC_DEF_H
+
+#define IEEE802154_FC_TYPE_BEACON	0x0	/* Frame is beacon */
+#define	IEEE802154_FC_TYPE_DATA		0x1	/* Frame is data */
+#define IEEE802154_FC_TYPE_ACK		0x2	/* Frame is acknowledgment */
+#define IEEE802154_FC_TYPE_MAC_CMD	0x3	/* Frame is MAC command */
+
+#define IEEE802154_FC_TYPE_SHIFT		0
+#define IEEE802154_FC_TYPE_MASK		((1 << 3) - 1)
+#define IEEE802154_FC_TYPE(x)		((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT)
+#define IEEE802154_FC_SET_TYPE(v, x)	do {	\
+	v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \
+	    (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \
+	} while (0)
+
+#define IEEE802154_FC_SECEN		(1 << 3)
+#define IEEE802154_FC_FRPEND		(1 << 4)
+#define IEEE802154_FC_ACK_REQ		(1 << 5)
+#define IEEE802154_FC_INTRA_PAN		(1 << 6)
+
+#define IEEE802154_FC_SAMODE_SHIFT	14
+#define IEEE802154_FC_SAMODE_MASK	(3 << IEEE802154_FC_SAMODE_SHIFT)
+#define IEEE802154_FC_DAMODE_SHIFT	10
+#define IEEE802154_FC_DAMODE_MASK	(3 << IEEE802154_FC_DAMODE_SHIFT)
+
+#define IEEE802154_FC_SAMODE(x)		\
+	(((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT)
+
+#define IEEE802154_FC_DAMODE(x)		\
+	(((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT)
+
+
+/* MAC's Command Frames Identifiers */
+#define IEEE802154_CMD_ASSOCIATION_REQ		0x01
+#define IEEE802154_CMD_ASSOCIATION_RESP		0x02
+#define IEEE802154_CMD_DISASSOCIATION_NOTIFY	0x03
+#define IEEE802154_CMD_DATA_REQ			0x04
+#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY	0x05
+#define IEEE802154_CMD_ORPHAN_NOTIFY		0x06
+#define IEEE802154_CMD_BEACON_REQ		0x07
+#define IEEE802154_CMD_COORD_REALIGN_NOTIFY	0x08
+#define IEEE802154_CMD_GTS_REQ			0x09
+
+/*
+ * The return values of MAC operations
+ */
+enum {
+	/*
+	 * The requested operation was completed successfully.
+	 * For a transmission request, this value indicates
+	 * a successful transmission.
+	 */
+	IEEE802154_SUCCESS = 0x0,
+
+	/* The beacon was lost following a synchronization request. */
+	IEEE802154_BEACON_LOSS = 0xe0,
+	/*
+	 * A transmission could not take place due to activity on the
+	 * channel, i.e., the CSMA-CA mechanism has failed.
+	 */
+	IEEE802154_CHNL_ACCESS_FAIL = 0xe1,
+	/* The GTS request has been denied by the PAN coordinator. */
+	IEEE802154_DENINED = 0xe2,
+	/* The attempt to disable the transceiver has failed. */
+	IEEE802154_DISABLE_TRX_FAIL = 0xe3,
+	/*
+	 * The received frame induces a failed security check according to
+	 * the security suite.
+	 */
+	IEEE802154_FAILED_SECURITY_CHECK = 0xe4,
+	/*
+	 * The frame resulting from secure processing has a length that is
+	 * greater than aMACMaxFrameSize.
+	 */
+	IEEE802154_FRAME_TOO_LONG = 0xe5,
+	/*
+	 * The requested GTS transmission failed because the specified GTS
+	 * either did not have a transmit GTS direction or was not defined.
+	 */
+	IEEE802154_INVALID_GTS = 0xe6,
+	/*
+	 * A request to purge an MSDU from the transaction queue was made using
+	 * an MSDU handle that was not found in the transaction table.
+	 */
+	IEEE802154_INVALID_HANDLE = 0xe7,
+	/* A parameter in the primitive is out of the valid range.*/
+	IEEE802154_INVALID_PARAMETER = 0xe8,
+	/* No acknowledgment was received after aMaxFrameRetries. */
+	IEEE802154_NO_ACK = 0xe9,
+	/* A scan operation failed to find any network beacons.*/
+	IEEE802154_NO_BEACON = 0xea,
+	/* No response data were available following a request. */
+	IEEE802154_NO_DATA = 0xeb,
+	/* The operation failed because a short address was not allocated. */
+	IEEE802154_NO_SHORT_ADDRESS = 0xec,
+	/*
+	 * A receiver enable request was unsuccessful because it could not be
+	 * completed within the CAP.
+	 */
+	IEEE802154_OUT_OF_CAP = 0xed,
+	/*
+	 * A PAN identifier conflict has been detected and communicated to the
+	 * PAN coordinator.
+	 */
+	IEEE802154_PANID_CONFLICT = 0xee,
+	/* A coordinator realignment command has been received. */
+	IEEE802154_REALIGMENT = 0xef,
+	/* The transaction has expired and its information discarded. */
+	IEEE802154_TRANSACTION_EXPIRED = 0xf0,
+	/* There is no capacity to store the transaction. */
+	IEEE802154_TRANSACTION_OVERFLOW = 0xf1,
+	/*
+	 * The transceiver was in the transmitter enabled state when the
+	 * receiver was requested to be enabled.
+	 */
+	IEEE802154_TX_ACTIVE = 0xf2,
+	/* The appropriate key is not available in the ACL. */
+	IEEE802154_UNAVAILABLE_KEY = 0xf3,
+	/*
+	 * A SET/GET request was issued with the identifier of a PIB attribute
+	 * that is not supported.
+	 */
+	IEEE802154_UNSUPPORTED_ATTR = 0xf4,
+	/*
+	 * A request to perform a scan operation failed because the MLME was
+	 * in the process of performing a previously initiated scan operation.
+	 */
+	IEEE802154_SCAN_IN_PROGRESS = 0xfc,
+};
+
+
+#endif
+
+
diff --git a/include/net/ieee802154/netdevice.h b/include/net/ieee802154/netdevice.h
new file mode 100644
index 00000000000..e2506af3e7c
--- /dev/null
+++ b/include/net/ieee802154/netdevice.h
@@ -0,0 +1,115 @@
+/*
+ * An interface between IEEE802.15.4 device and rest of the kernel.
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef IEEE802154_NETDEVICE_H
+#define IEEE802154_NETDEVICE_H
+
+/*
+ * A control block of skb passed between the ARPHRD_IEEE802154 device
+ * and other stack parts.
+ */
+struct ieee802154_mac_cb {
+	u8 lqi;
+	struct ieee802154_addr sa;
+	struct ieee802154_addr da;
+	u8 flags;
+	u8 seq;
+};
+
+static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb)
+{
+	return (struct ieee802154_mac_cb *)skb->cb;
+}
+
+#define MAC_CB_FLAG_TYPEMASK		((1 << 3) - 1)
+
+#define MAC_CB_FLAG_ACKREQ		(1 << 3)
+#define MAC_CB_FLAG_SECEN		(1 << 4)
+#define MAC_CB_FLAG_INTRAPAN		(1 << 5)
+
+static inline int mac_cb_is_ackreq(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ;
+}
+
+static inline int mac_cb_is_secen(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN;
+}
+
+static inline int mac_cb_is_intrapan(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN;
+}
+
+static inline int mac_cb_type(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK;
+}
+
+#define IEEE802154_MAC_SCAN_ED		0
+#define IEEE802154_MAC_SCAN_ACTIVE	1
+#define IEEE802154_MAC_SCAN_PASSIVE	2
+#define IEEE802154_MAC_SCAN_ORPHAN	3
+
+/*
+ * This should be located at net_device->ml_priv
+ */
+struct ieee802154_mlme_ops {
+	int (*assoc_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 channel, u8 cap);
+	int (*assoc_resp)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u16 short_addr, u8 status);
+	int (*disassoc_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 reason);
+	int (*start_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 channel, u8 bcn_ord, u8 sf_ord,
+			u8 pan_coord, u8 blx, u8 coord_realign);
+	int (*scan_req)(struct net_device *dev,
+			u8 type, u32 channels, u8 duration);
+
+	/*
+	 * FIXME: these should become the part of PIB/MIB interface.
+	 * However we still don't have IB interface of any kind
+	 */
+	u16 (*get_pan_id)(struct net_device *dev);
+	u16 (*get_short_addr)(struct net_device *dev);
+	u8 (*get_dsn)(struct net_device *dev);
+	u8 (*get_bsn)(struct net_device *dev);
+};
+
+static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops(
+		struct net_device *dev)
+{
+	return dev->ml_priv;
+}
+
+#endif
+
+
diff --git a/include/net/ieee802154/nl802154.h b/include/net/ieee802154/nl802154.h
new file mode 100644
index 00000000000..78efcdf52b5
--- /dev/null
+++ b/include/net/ieee802154/nl802154.h
@@ -0,0 +1,41 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef IEEE802154_NL_H
+#define IEEE802154_NL_H
+
+struct net_device;
+struct ieee802154_addr;
+
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 cap);
+int ieee802154_nl_assoc_confirm(struct net_device *dev,
+		u16 short_addr, u8 status);
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason);
+int ieee802154_nl_disassoc_confirm(struct net_device *dev,
+		u8 status);
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+		u8 status, u8 scan_type, u32 unscanned,
+		u8 *edl/*, struct list_head *pan_desc_list */);
+int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid,
+		u16 coord_addr);
+
+#endif
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index f74665d7bea..22c73a77cd9 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -100,7 +100,7 @@ static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo,
 
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
-	else return __inet6_lookup(dev_net(skb->dst->dev), hashinfo,
+	else return __inet6_lookup(dev_net(skb_dst(skb)->dev), hashinfo,
 				   &ipv6_hdr(skb)->saddr, sport,
 				   &ipv6_hdr(skb)->daddr, ntohs(dport),
 				   inet6_iif(skb));
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index a44e2248b2e..d522dcf3031 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -385,7 +385,7 @@ static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo,
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
 	else
-		return __inet_lookup(dev_net(skb->dst->dev), hashinfo,
+		return __inet_lookup(dev_net(skb_dst(skb)->dev), hashinfo,
 				     iph->saddr, sport,
 				     iph->daddr, dport, inet_iif(skb));
 }
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index de0ecc71cf0..20a6957af87 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -130,7 +130,8 @@ struct inet_sock {
 				freebind:1,
 				hdrincl:1,
 				mc_loop:1,
-				transparent:1;
+				transparent:1,
+				mc_all:1;
 	int			mc_index;
 	__be32			mc_addr;
 	struct ip_mc_socklist	*mc_list;
diff --git a/include/net/ip.h b/include/net/ip.h
index 4ac7577f98d..72c36926c26 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -168,7 +168,10 @@ struct ipv4_config
 extern struct ipv4_config ipv4_config;
 #define IP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.ip_statistics, field)
 #define IP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.ip_statistics, field)
+#define IP_ADD_STATS(net, field, val)	SNMP_ADD_STATS((net)->mib.ip_statistics, field, val)
 #define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS_BH((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS(net, field, val) SNMP_UPD_PO_STATS((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS_BH(net, field, val) SNMP_UPD_PO_STATS_BH((net)->mib.ip_statistics, field, val)
 #define NET_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.net_statistics, field)
 #define NET_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.net_statistics, field)
 #define NET_INC_STATS_USER(net, field) 	SNMP_INC_STATS_USER((net)->mib.net_statistics, field)
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 5f53db7e4e5..0e1b8aebaff 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -142,7 +142,7 @@ static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst,
 
 static inline int ipv6_unicast_destination(struct sk_buff *skb)
 {
-	struct rt6_info *rt = (struct rt6_info *) skb->dst;
+	struct rt6_info *rt = (struct rt6_info *) skb_dst(skb);
 
 	return rt->rt6i_flags & RTF_LOCAL;
 }
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 8b12667f7a2..ef91fe924ba 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -124,14 +124,12 @@ struct fib_result_nl {
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 
 #define FIB_RES_NH(res)		((res).fi->fib_nh[(res).nh_sel])
-#define FIB_RES_RESET(res)	((res).nh_sel = 0)
 
 #define FIB_TABLE_HASHSZ 2
 
 #else /* CONFIG_IP_ROUTE_MULTIPATH */
 
 #define FIB_RES_NH(res)		((res).fi->fib_nh[0])
-#define FIB_RES_RESET(res)
 
 #define FIB_TABLE_HASHSZ 256
 
@@ -145,7 +143,6 @@ struct fib_result_nl {
 struct fib_table {
 	struct hlist_node tb_hlist;
 	u32		tb_id;
-	unsigned	tb_stamp;
 	int		tb_default;
 	int		(*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res);
 	int		(*tb_insert)(struct fib_table *, struct fib_config *);
diff --git a/include/net/ipip.h b/include/net/ipip.h
index fdf9bd74370..5d3036fa151 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -28,11 +28,18 @@ struct ip_tunnel
 	unsigned int			prl_count;	/* # of entries in PRL */
 };
 
+/* ISATAP: default interval between RS in secondy */
+#define IPTUNNEL_RS_DEFAULT_DELAY	(900)
+
 struct ip_tunnel_prl_entry
 {
 	struct ip_tunnel_prl_entry	*next;
 	__be32				addr;
 	u16				flags;
+	unsigned long			rs_delay;
+	struct timer_list		rs_timer;
+	struct ip_tunnel		*tunnel;
+	spinlock_t			lock;
 };
 
 #define IPTUNNEL_XMIT() do {						\
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index c1f16fc49ad..f27fd83d67d 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -126,15 +126,28 @@ extern struct ctl_path net_ipv6_ctl_path[];
 	SNMP_ADD_STATS##modifier((net)->mib.statname##_statistics, (field), (val));\
 })
 
+#define _DEVUPD(net, statname, modifier, idev, field, val)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_UPD_PO_STATS##modifier((_idev)->stats.statname, field, (val)); \
+	SNMP_UPD_PO_STATS##modifier((net)->mib.statname##_statistics, field, (val));\
+})
+
 /* MIBs */
 
 #define IP6_INC_STATS(net, idev,field)		\
 		_DEVINC(net, ipv6, , idev, field)
 #define IP6_INC_STATS_BH(net, idev,field)	\
 		_DEVINC(net, ipv6, _BH, idev, field)
+#define IP6_ADD_STATS(net, idev,field,val)	\
+		_DEVADD(net, ipv6, , idev, field, val)
 #define IP6_ADD_STATS_BH(net, idev,field,val)	\
 		_DEVADD(net, ipv6, _BH, idev, field, val)
-
+#define IP6_UPD_PO_STATS(net, idev,field,val)   \
+		_DEVUPD(net, ipv6, , idev, field, val)
+#define IP6_UPD_PO_STATS_BH(net, idev,field,val)   \
+		_DEVUPD(net, ipv6, _BH, idev, field, val)
 #define ICMP6_INC_STATS(net, idev, field)	\
 		_DEVINC(net, icmpv6, , idev, field)
 #define ICMP6_INC_STATS_BH(net, idev, field)	\
diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
index 85f80eadfa3..21ee49ffcba 100644
--- a/include/net/iucv/af_iucv.h
+++ b/include/net/iucv/af_iucv.h
@@ -73,8 +73,17 @@ struct iucv_sock {
 	struct sk_buff_head	backlog_skb_q;
 	struct sock_msg_q	message_q;
 	unsigned int		send_tag;
+	u8			flags;
+	u16			msglimit;
 };
 
+/* iucv socket options (SOL_IUCV) */
+#define SO_IPRMDATA_MSG	0x0080		/* send/recv IPRM_DATA msgs */
+#define SO_MSGLIMIT	0x1000		/* get/set IUCV MSGLIMIT */
+
+/* iucv related control messages (scm) */
+#define SCM_IUCV_TRGCLS	0x0001		/* target class control message */
+
 struct iucv_sock_list {
 	struct hlist_head head;
 	rwlock_t	  lock;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3b83a80e3fe..c0610447697 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -19,7 +19,6 @@
 #include <linux/wireless.h>
 #include <linux/device.h>
 #include <linux/ieee80211.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 
 /**
@@ -74,22 +73,6 @@
  */
 
 /**
- * struct ieee80211_ht_bss_info - describing BSS's HT characteristics
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT characteristics in a BSS.
- *
- * @primary_channel: channel number of primery channel
- * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width)
- * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection)
- */
-struct ieee80211_ht_bss_info {
-	u8 primary_channel;
-	u8 bss_cap;  /* use IEEE80211_HT_IE_CHA_ */
-	u8 bss_op_mode; /* use IEEE80211_HT_IE_ */
-};
-
-/**
  * enum ieee80211_max_queues - maximum number of queues
  *
  * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
@@ -150,6 +133,13 @@ struct ieee80211_low_level_stats {
  * @BSS_CHANGED_ERP_SLOT: slot timing changed
  * @BSS_CHANGED_HT: 802.11n parameters changed
  * @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
+ * @BSS_CHANGED_BSSID: BSSID changed, for whatever
+ *	reason (IBSS and managed mode)
+ * @BSS_CHANGED_BEACON: Beacon data changed, retrieve
+ *	new beacon (beaconing modes)
+ * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
+ *	enabled/disabled (beaconing modes)
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -158,14 +148,10 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_ERP_SLOT		= 1<<3,
 	BSS_CHANGED_HT                  = 1<<4,
 	BSS_CHANGED_BASIC_RATES		= 1<<5,
-};
-
-/**
- * struct ieee80211_bss_ht_conf - BSS's changing HT configuration
- * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info)
- */
-struct ieee80211_bss_ht_conf {
-	u16 operation_mode;
+	BSS_CHANGED_BEACON_INT		= 1<<6,
+	BSS_CHANGED_BSSID		= 1<<7,
+	BSS_CHANGED_BEACON		= 1<<8,
+	BSS_CHANGED_BEACON_ENABLED	= 1<<9,
 };
 
 /**
@@ -187,12 +173,16 @@ struct ieee80211_bss_ht_conf {
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
- * @ht: BSS's HT configuration
  * @basic_rates: bitmap of basic rates, each bit stands for an
  *	index into the rate table configured by the driver in
  *	the current band.
+ * @bssid: The BSSID for this BSS
+ * @enable_beacon: whether beaconing should be enabled or not
+ * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
+ *	This field is only valid when the channel type is one of the HT types.
  */
 struct ieee80211_bss_conf {
+	const u8 *bssid;
 	/* association related data */
 	bool assoc;
 	u16 aid;
@@ -200,12 +190,13 @@ struct ieee80211_bss_conf {
 	bool use_cts_prot;
 	bool use_short_preamble;
 	bool use_short_slot;
+	bool enable_beacon;
 	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
 	u32 basic_rates;
-	struct ieee80211_bss_ht_conf ht;
+	u16 ht_operation_mode;
 };
 
 /**
@@ -248,6 +239,8 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
  *	used to indicate that a pending frame requires TX processing before
  *	it can be sent out.
+ * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
+ *	used to indicate that a frame was already retried due to PS
  */
 enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
@@ -265,6 +258,7 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
 	IEEE80211_TX_INTFL_RCALGO		= BIT(13),
 	IEEE80211_TX_INTFL_NEED_TXPROCESSING	= BIT(14),
+	IEEE80211_TX_INTFL_RETRIED		= BIT(15),
 };
 
 /**
@@ -518,52 +512,76 @@ struct ieee80211_rx_status {
  * Flags to define PHY configuration options
  *
  * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
- * @IEEE80211_CONF_PS: Enable 802.11 power save mode
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
+ * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ *	the driver should be prepared to handle configuration requests but
+ *	may turn the device off as much as possible. Typically, this flag will
+ *	be set when an interface is set UP but not associated or scanning, but
+ *	it can also be unset in that case when monitor interfaces are active.
  */
 enum ieee80211_conf_flags {
 	IEEE80211_CONF_RADIOTAP		= (1<<0),
 	IEEE80211_CONF_PS		= (1<<1),
+	IEEE80211_CONF_IDLE		= (1<<2),
 };
 
 
 /**
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
- * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
- * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
+ * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
  * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
- * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
- * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
  */
 enum ieee80211_conf_changed {
-	IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
-	IEEE80211_CONF_CHANGE_BEACON_INTERVAL	= BIT(1),
+	_IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
 	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
-	IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT	= BIT(5),
-	IEEE80211_CONF_CHANGE_POWER		= BIT(6),
-	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(7),
-	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(8),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
+	IEEE80211_CONF_CHANGE_IDLE		= BIT(8),
 };
 
+static inline __deprecated enum ieee80211_conf_changed
+__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void)
+{
+	return _IEEE80211_CONF_CHANGE_RADIO_ENABLED;
+}
+#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \
+	__IEEE80211_CONF_CHANGE_RADIO_ENABLED()
+
 /**
  * struct ieee80211_conf - configuration of the device
  *
  * This struct indicates how the driver shall configure the hardware.
  *
+ * @flags: configuration flags defined above
+ *
  * @radio_enabled: when zero, driver is required to switch off the radio.
- * @beacon_int: beacon interval (TODO make interface config)
+ * @beacon_int: DEPRECATED, DO NOT USE
+ *
  * @listen_interval: listen interval in units of beacon interval
- * @flags: configuration flags defined above
+ * @max_sleep_period: the maximum number of beacon intervals to sleep for
+ *	before checking the beacon for a TIM bit (managed mode only); this
+ *	value will be only achievable between DTIM frames, the hardware
+ *	needs to check for the multicast traffic bit in DTIM beacons.
+ *	This variable is valid only when the CONF_PS flag is set.
+ * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
+ *	powersave documentation below. This variable is valid only when
+ *	the CONF_PS flag is set.
+ *
  * @power_level: requested transmit power (in dBm)
- * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
+ *
  * @channel: the channel to tune to
  * @channel_type: the channel (HT) type
+ *
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
  *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
  *    but actually means the number of transmissions not the number of retries
@@ -572,12 +590,13 @@ enum ieee80211_conf_changed {
  *    number of transmissions not the number of retries
  */
 struct ieee80211_conf {
-	int beacon_int;
+	int __deprecated beacon_int;
 	u32 flags;
 	int power_level, dynamic_ps_timeout;
+	int max_sleep_period;
 
 	u16 listen_interval;
-	bool radio_enabled;
+	bool __deprecated radio_enabled;
 
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
@@ -640,37 +659,6 @@ struct ieee80211_if_init_conf {
 };
 
 /**
- * enum ieee80211_if_conf_change - interface config change flags
- *
- * @IEEE80211_IFCC_BSSID: The BSSID changed.
- * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
- *	(currently AP and MESH only), use ieee80211_beacon_get().
- * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
- */
-enum ieee80211_if_conf_change {
-	IEEE80211_IFCC_BSSID		= BIT(0),
-	IEEE80211_IFCC_BEACON		= BIT(1),
-	IEEE80211_IFCC_BEACON_ENABLED	= BIT(2),
-};
-
-/**
- * struct ieee80211_if_conf - configuration of an interface
- *
- * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
- * @bssid: BSSID of the network we are associated to/creating.
- * @enable_beacon: Indicates whether beacons can be sent.
- *	This is valid only for AP/IBSS/MESH modes.
- *
- * This structure is passed to the config_interface() callback of
- * &struct ieee80211_hw.
- */
-struct ieee80211_if_conf {
-	u32 changed;
-	const u8 *bssid;
-	bool enable_beacon;
-};
-
-/**
  * enum ieee80211_key_alg - key algorithm
  * @ALG_WEP: WEP40 or WEP104
  * @ALG_TKIP: TKIP
@@ -685,16 +673,6 @@ enum ieee80211_key_alg {
 };
 
 /**
- * enum ieee80211_key_len - key length
- * @LEN_WEP40: WEP 5-byte long key
- * @LEN_WEP104: WEP 13-byte long key
- */
-enum ieee80211_key_len {
-	LEN_WEP40 = 5,
-	LEN_WEP104 = 13,
-};
-
-/**
  * enum ieee80211_key_flags - key flags
  *
  * These flags are used for communication about keys between the driver
@@ -1109,11 +1087,9 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * need software support for parsing the TIM bitmap. This is also supported
  * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
  * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
- * required to pass up beacons. Additionally, in this case, mac80211 will
- * wake up the hardware when multicast traffic is announced in the beacon.
- *
- * FIXME: I don't think we can be fast enough in software when we want to
- *	  receive multicast traffic?
+ * required to pass up beacons. The hardware is still required to handle
+ * waking up for multicast traffic; if it cannot the driver must handle that
+ * as best as it can, mac80211 is too slow.
  *
  * Dynamic powersave mode is an extension to normal powersave mode in which
  * the hardware stays awake for a user-specified period of time after sending
@@ -1134,11 +1110,53 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * way the host will only receive beacons where some relevant information
  * (for example ERP protection or WMM settings) have changed.
  *
- * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag.
- * The driver needs to enable beacon filter support whenever power save is
- * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled,
- * the stack will not check for beacon miss at all and the driver needs to
- * notify about complete loss of beacons with ieee80211_beacon_loss().
+ * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER
+ * hardware capability. The driver needs to enable beacon filter support
+ * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * power save is enabled, the stack will not check for beacon loss and the
+ * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ *
+ * The time (or number of beacons missed) until the firmware notifies the
+ * driver of a beacon loss event (which in turn causes the driver to call
+ * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * by mac80211 and the roaming algorithm in the future.
+ *
+ * Since there may be constantly changing information elements that nothing
+ * in the software stack cares about, we will, in the future, have mac80211
+ * tell the driver which information elements are interesting in the sense
+ * that we want to see changes in them. This will include
+ *  - a list of information element IDs
+ *  - a list of OUIs for the vendor information element
+ *
+ * Ideally, the hardware would filter out any beacons without changes in the
+ * requested elements, but if it cannot support that it may, at the expense
+ * of some efficiency, filter out only a subset. For example, if the device
+ * doesn't support checking for OUIs it should pass up all changes in all
+ * vendor information elements.
+ *
+ * Note that change, for the sake of simplification, also includes information
+ * elements appearing or disappearing from the beacon.
+ *
+ * Some hardware supports an "ignore list" instead, just make sure nothing
+ * that was requested is on the ignore list, and include commonly changing
+ * information element IDs in the ignore list, for example 11 (BSS load) and
+ * the various vendor-assigned IEs with unknown contents (128, 129, 133-136,
+ * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility
+ * it could also include some currently unused IDs.
+ *
+ *
+ * In addition to these capabilities, hardware should support notifying the
+ * host of changes in the beacon RSSI. This is relevant to implement roaming
+ * when no traffic is flowing (when traffic is flowing we see the RSSI of
+ * the received data packets). This can consist in notifying the host when
+ * the RSSI changes significantly or when it drops below or rises above
+ * configurable thresholds. In the future these thresholds will also be
+ * configured by mac80211 (which gets them from userspace) to implement
+ * them as the roaming algorithm requires.
+ *
+ * If the hardware cannot implement this, the driver should ask it to
+ * periodically pass beacon frames to the host so that software can do the
+ * signal strength threshold checking.
  */
 
 /**
@@ -1298,10 +1316,6 @@ enum ieee80211_ampdu_mlme_action {
  *	This function should never fail but returns a negative error code
  *	if it does.
  *
- * @config_interface: Handler for configuration requests related to interfaces
- *	(e.g. BSSID changes.)
- *	Returns a negative error code which will be seen in userspace.
- *
  * @bss_info_changed: Handler for configuration requests related to BSS
  *	parameters that may vary during BSS's lifespan, and may affect low
  *	level driver (e.g. assoc/disassoc status, erp parameters).
@@ -1330,11 +1344,14 @@ enum ieee80211_ampdu_mlme_action {
  *	the scan state machine in stack. The scan must honour the channel
  *	configuration done by the regulatory agent in the wiphy's
  *	registered bands. The hardware (or the driver) needs to make sure
- *	that power save is disabled. When the scan finishes,
- *	ieee80211_scan_completed() must be called; note that it also must
- *	be called when the scan cannot finish because the hardware is
- *	turned off! Anything else is a bug! Returns a negative error code
- *	which will be seen in userspace.
+ *	that power save is disabled.
+ *	The @req ie/ie_len members are rewritten by mac80211 to contain the
+ *	entire IEs after the SSID, so that drivers need not look at these
+ *	at all but just send them after the SSID -- mac80211 includes the
+ *	(extended) supported rates and HT information (where applicable).
+ *	When the scan finishes, ieee80211_scan_completed() must be called;
+ *	note that it also must be called when the scan cannot finish due to
+ *	any error unless this callback returned a negative error code.
  *
  * @sw_scan_start: Notifier function that is called just before a software scan
  *	is started. Can be NULL, if the driver doesn't need this notification.
@@ -1390,6 +1407,10 @@ enum ieee80211_ampdu_mlme_action {
  * 	is the first frame we expect to perform the action on. Notice
  * 	that TX/RX_STOP can pass NULL for this parameter.
  *	Returns a negative error code on failure.
+ *
+ * @rfkill_poll: Poll rfkill hardware state. If you need this, you also
+ *	need to set wiphy->rfkill_poll to %true before registration,
+ *	and need to call wiphy_rfkill_set_hw_state() in the callback.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1400,9 +1421,6 @@ struct ieee80211_ops {
 	void (*remove_interface)(struct ieee80211_hw *hw,
 				 struct ieee80211_if_init_conf *conf);
 	int (*config)(struct ieee80211_hw *hw, u32 changed);
-	int (*config_interface)(struct ieee80211_hw *hw,
-				struct ieee80211_vif *vif,
-				struct ieee80211_if_conf *conf);
 	void (*bss_info_changed)(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *info,
@@ -1441,6 +1459,8 @@ struct ieee80211_ops {
 	int (*ampdu_action)(struct ieee80211_hw *hw,
 			    enum ieee80211_ampdu_mlme_action action,
 			    struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+
+	void (*rfkill_poll)(struct ieee80211_hw *hw);
 };
 
 /**
@@ -1572,6 +1592,20 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw);
  */
 void ieee80211_free_hw(struct ieee80211_hw *hw);
 
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
 /* trick to avoid symbol clashes with the ieee80211 subsystem */
 void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 		    struct ieee80211_rx_status *status);
@@ -1775,24 +1809,6 @@ struct sk_buff *
 ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 
 /**
- * ieee80211_get_hdrlen_from_skb - get header length from data
- *
- * Given an skb with a raw 802.11 header at the data pointer this function
- * returns the 802.11 header length in bytes (not including encryption
- * headers). If the data in the sk_buff is too short to contain a valid 802.11
- * header the function returns 0.
- *
- * @skb: the frame
- */
-unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
-
-/**
- * ieee80211_hdrlen - get header length in bytes from frame control
- * @fc: frame control field in little-endian format
- */
-unsigned int ieee80211_hdrlen(__le16 fc);
-
-/**
  * ieee80211_get_tkip_key - get a TKIP rc4 for skb
  *
  * This function computes a TKIP rc4 key for an skb. It computes
diff --git a/include/net/netfilter/ipv4/nf_conntrack_icmp.h b/include/net/netfilter/ipv4/nf_conntrack_icmp.h
deleted file mode 100644
index 3dd22cff23e..00000000000
--- a/include/net/netfilter/ipv4/nf_conntrack_icmp.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _NF_CONNTRACK_ICMP_H
-#define _NF_CONNTRACK_ICMP_H
-/* ICMP tracking. */
-#include <asm/atomic.h>
-
-struct ip_ct_icmp
-{
-	/* Optimization: when number in == number out, forget immediately. */
-	atomic_t count;
-};
-#endif /* _NF_CONNTRACK_ICMP_H */
diff --git a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
index 86591afda29..67edd50a398 100644
--- a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
+++ b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
@@ -9,7 +9,6 @@
 
 #ifndef _NF_CONNTRACK_ICMPV6_H
 #define _NF_CONNTRACK_ICMPV6_H
-#include <asm/atomic.h>
 
 #ifndef ICMPV6_NI_QUERY
 #define ICMPV6_NI_QUERY 139
@@ -18,10 +17,4 @@
 #define ICMPV6_NI_REPLY 140
 #endif
 
-struct nf_ct_icmpv6
-{
-	/* Optimization: when number in == number out, forget immediately. */
-	atomic_t count;
-};
-
 #endif /* _NF_CONNTRACK_ICMPV6_H */
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 6c3f964de9e..a632689b61b 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -23,7 +23,6 @@
 #include <linux/netfilter/nf_conntrack_dccp.h>
 #include <linux/netfilter/nf_conntrack_sctp.h>
 #include <linux/netfilter/nf_conntrack_proto_gre.h>
-#include <net/netfilter/ipv4/nf_conntrack_icmp.h>
 #include <net/netfilter/ipv6/nf_conntrack_icmpv6.h>
 
 #include <net/netfilter/nf_conntrack_tuple.h>
@@ -34,8 +33,6 @@ union nf_conntrack_proto {
 	struct nf_ct_dccp dccp;
 	struct ip_ct_sctp sctp;
 	struct ip_ct_tcp tcp;
-	struct ip_ct_icmp icmp;
-	struct nf_ct_icmpv6 icmpv6;
 	struct nf_ct_gre gre;
 };
 
@@ -96,6 +93,8 @@ struct nf_conn {
            plus 1 for any connection(s) we are `master' for */
 	struct nf_conntrack ct_general;
 
+	spinlock_t lock;
+
 	/* XXX should I move this to the tail ? - Y.K */
 	/* These are my tuples; original and reply */
 	struct nf_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX];
@@ -144,6 +143,8 @@ static inline u_int8_t nf_ct_protonum(const struct nf_conn *ct)
 	return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum;
 }
 
+#define nf_ct_tuple(ct, dir) (&(ct)->tuplehash[dir].tuple)
+
 /* get master conntrack via master expectation */
 #define master_ct(conntr) (conntr->master)
 
@@ -200,8 +201,10 @@ extern struct nf_conntrack_tuple_hash *
 __nf_conntrack_find(struct net *net, const struct nf_conntrack_tuple *tuple);
 
 extern void nf_conntrack_hash_insert(struct nf_conn *ct);
+extern void nf_ct_delete_from_lists(struct nf_conn *ct);
+extern void nf_ct_insert_dying_list(struct nf_conn *ct);
 
-extern void nf_conntrack_flush(struct net *net, u32 pid, int report);
+extern void nf_conntrack_flush_report(struct net *net, u32 pid, int report);
 
 extern bool nf_ct_get_tuplepr(const struct sk_buff *skb,
 			      unsigned int nhoff, u_int16_t l3num,
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index 0ff0dc69ca4..4f20d58e2ab 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -6,17 +6,54 @@
 #define _NF_CONNTRACK_ECACHE_H
 #include <net/netfilter/nf_conntrack.h>
 
-#include <linux/notifier.h>
-#include <linux/interrupt.h>
 #include <net/net_namespace.h>
 #include <net/netfilter/nf_conntrack_expect.h>
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+/* Connection tracking event types */
+enum ip_conntrack_events
+{
+	IPCT_NEW		= 0,	/* new conntrack */
+	IPCT_RELATED		= 1,	/* related conntrack */
+	IPCT_DESTROY		= 2,	/* destroyed conntrack */
+	IPCT_STATUS		= 3,	/* status has changed */
+	IPCT_PROTOINFO		= 4,	/* protocol information has changed */
+	IPCT_HELPER		= 5,	/* new helper has been set */
+	IPCT_MARK		= 6,	/* new mark has been set */
+	IPCT_NATSEQADJ		= 7,	/* NAT is doing sequence adjustment */
+	IPCT_SECMARK		= 8,	/* new security mark has been set */
+};
+
+enum ip_conntrack_expect_events {
+	IPEXP_NEW		= 0,	/* new expectation */
+};
 
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
 struct nf_conntrack_ecache {
-	struct nf_conn *ct;
-	unsigned int events;
+	unsigned long cache;		/* bitops want long */
+	unsigned long missed;		/* missed events */
+	u32 pid;			/* netlink pid of destroyer */
+};
+
+static inline struct nf_conntrack_ecache *
+nf_ct_ecache_find(const struct nf_conn *ct)
+{
+	return nf_ct_ext_find(ct, NF_CT_EXT_ECACHE);
+}
+
+static inline struct nf_conntrack_ecache *
+nf_ct_ecache_ext_add(struct nf_conn *ct, gfp_t gfp)
+{
+	struct net *net = nf_ct_net(ct);
+
+	if (!net->ct.sysctl_events)
+		return NULL;
+
+	return nf_ct_ext_add(ct, NF_CT_EXT_ECACHE, gfp);
 };
 
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
 /* This structure is passed to event handler */
 struct nf_ct_event {
 	struct nf_conn *ct;
@@ -24,47 +61,96 @@ struct nf_ct_event {
 	int report;
 };
 
-extern struct atomic_notifier_head nf_conntrack_chain;
-extern int nf_conntrack_register_notifier(struct notifier_block *nb);
-extern int nf_conntrack_unregister_notifier(struct notifier_block *nb);
+struct nf_ct_event_notifier {
+	int (*fcn)(unsigned int events, struct nf_ct_event *item);
+};
+
+extern struct nf_ct_event_notifier *nf_conntrack_event_cb;
+extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb);
+extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb);
 
-extern void nf_ct_deliver_cached_events(const struct nf_conn *ct);
-extern void __nf_ct_event_cache_init(struct nf_conn *ct);
-extern void nf_ct_event_cache_flush(struct net *net);
+extern void nf_ct_deliver_cached_events(struct nf_conn *ct);
 
 static inline void
 nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct)
 {
+	struct nf_conntrack_ecache *e;
+
+	if (nf_conntrack_event_cb == NULL)
+		return;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		return;
+
+	set_bit(event, &e->cache);
+}
+
+static inline int
+nf_conntrack_eventmask_report(unsigned int eventmask,
+			      struct nf_conn *ct,
+			      u32 pid,
+			      int report)
+{
+	int ret = 0;
 	struct net *net = nf_ct_net(ct);
-	struct nf_conntrack_ecache *ecache;
-
-	local_bh_disable();
-	ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id());
-	if (ct != ecache->ct)
-		__nf_ct_event_cache_init(ct);
-	ecache->events |= event;
-	local_bh_enable();
+	struct nf_ct_event_notifier *notify;
+	struct nf_conntrack_ecache *e;
+
+	rcu_read_lock();
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	if (!net->ct.sysctl_events)
+		goto out_unlock;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		goto out_unlock;
+
+	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) {
+		struct nf_ct_event item = {
+			.ct 	= ct,
+			.pid	= e->pid ? e->pid : pid,
+			.report = report
+		};
+		/* This is a resent of a destroy event? If so, skip missed */
+		unsigned long missed = e->pid ? 0 : e->missed;
+
+		ret = notify->fcn(eventmask | missed, &item);
+		if (unlikely(ret < 0 || missed)) {
+			spin_lock_bh(&ct->lock);
+			if (ret < 0) {
+				/* This is a destroy event that has been
+				 * triggered by a process, we store the PID
+				 * to include it in the retransmission. */
+				if (eventmask & (1 << IPCT_DESTROY) &&
+				    e->pid == 0 && pid != 0)
+					e->pid = pid;
+				else
+					e->missed |= eventmask;
+			} else
+				e->missed &= ~missed;
+			spin_unlock_bh(&ct->lock);
+		}
+	}
+out_unlock:
+	rcu_read_unlock();
+	return ret;
 }
 
-static inline void
-nf_conntrack_event_report(enum ip_conntrack_events event,
-			  struct nf_conn *ct,
-			  u32 pid,
-			  int report)
+static inline int
+nf_conntrack_event_report(enum ip_conntrack_events event, struct nf_conn *ct,
+			  u32 pid, int report)
 {
-	struct nf_ct_event item = {
-		.ct 	= ct,
-		.pid	= pid,
-		.report = report
-	};
-	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
-		atomic_notifier_call_chain(&nf_conntrack_chain, event, &item);
+	return nf_conntrack_eventmask_report(1 << event, ct, pid, report);
 }
 
-static inline void
+static inline int
 nf_conntrack_event(enum ip_conntrack_events event, struct nf_conn *ct)
 {
-	nf_conntrack_event_report(event, ct, 0, 0);
+	return nf_conntrack_eventmask_report(1 << event, ct, 0, 0);
 }
 
 struct nf_exp_event {
@@ -73,9 +159,13 @@ struct nf_exp_event {
 	int report;
 };
 
-extern struct atomic_notifier_head nf_ct_expect_chain;
-extern int nf_ct_expect_register_notifier(struct notifier_block *nb);
-extern int nf_ct_expect_unregister_notifier(struct notifier_block *nb);
+struct nf_exp_event_notifier {
+	int (*fcn)(unsigned int events, struct nf_exp_event *item);
+};
+
+extern struct nf_exp_event_notifier *nf_expect_event_cb;
+extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb);
+extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb);
 
 static inline void
 nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
@@ -83,12 +173,27 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
 			  u32 pid,
 			  int report)
 {
-	struct nf_exp_event item = {
-		.exp	= exp,
-		.pid	= pid,
-		.report = report
-	};
-	atomic_notifier_call_chain(&nf_ct_expect_chain, event, &item);
+	struct net *net = nf_ct_exp_net(exp);
+	struct nf_exp_event_notifier *notify;
+
+	rcu_read_lock();
+	notify = rcu_dereference(nf_expect_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	if (!net->ct.sysctl_events)
+		goto out_unlock;
+
+	{
+		struct nf_exp_event item = {
+			.exp	= exp,
+			.pid	= pid,
+			.report = report
+		};
+		notify->fcn(1 << event, &item);
+	}
+out_unlock:
+	rcu_read_unlock();
 }
 
 static inline void
@@ -105,12 +210,16 @@ extern void nf_conntrack_ecache_fini(struct net *net);
 
 static inline void nf_conntrack_event_cache(enum ip_conntrack_events event,
 					    struct nf_conn *ct) {}
-static inline void nf_conntrack_event(enum ip_conntrack_events event,
-				      struct nf_conn *ct) {}
-static inline void nf_conntrack_event_report(enum ip_conntrack_events event,
-					     struct nf_conn *ct,
-					     u32 pid,
-					     int report) {}
+static inline int nf_conntrack_eventmask_report(unsigned int eventmask,
+						struct nf_conn *ct,
+						u32 pid,
+						int report) { return 0; }
+static inline int nf_conntrack_event(enum ip_conntrack_events event,
+				     struct nf_conn *ct) { return 0; }
+static inline int nf_conntrack_event_report(enum ip_conntrack_events event,
+					    struct nf_conn *ct,
+					    u32 pid,
+					    int report) { return 0; }
 static inline void nf_ct_deliver_cached_events(const struct nf_conn *ct) {}
 static inline void nf_ct_expect_event(enum ip_conntrack_expect_events event,
 				      struct nf_conntrack_expect *exp) {}
@@ -118,7 +227,6 @@ static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events e,
 					     struct nf_conntrack_expect *exp,
  					     u32 pid,
  					     int report) {}
-static inline void nf_ct_event_cache_flush(struct net *net) {}
 
 static inline int nf_conntrack_ecache_init(struct net *net)
 {
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index da8ee52613a..7f8fc5d123c 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -8,12 +8,14 @@ enum nf_ct_ext_id
 	NF_CT_EXT_HELPER,
 	NF_CT_EXT_NAT,
 	NF_CT_EXT_ACCT,
+	NF_CT_EXT_ECACHE,
 	NF_CT_EXT_NUM,
 };
 
 #define NF_CT_EXT_HELPER_TYPE struct nf_conn_help
 #define NF_CT_EXT_NAT_TYPE struct nf_conn_nat
 #define NF_CT_EXT_ACCT_TYPE struct nf_conn_counter
+#define NF_CT_EXT_ECACHE_TYPE struct nf_conntrack_ecache
 
 /* Extensions: optional stuff which isn't permanently in struct. */
 struct nf_ct_ext {
diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h
index ee2a4b369a0..1b706800092 100644
--- a/include/net/netfilter/nf_conntrack_helper.h
+++ b/include/net/netfilter/nf_conntrack_helper.h
@@ -50,6 +50,8 @@ extern struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp);
 
 extern int __nf_ct_try_assign_helper(struct nf_conn *ct, gfp_t flags);
 
+extern void nf_ct_helper_destroy(struct nf_conn *ct);
+
 static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct)
 {
 	return nf_ct_ext_find(ct, NF_CT_EXT_HELPER);
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
index ba32ed7bdab..3767fb41e54 100644
--- a/include/net/netfilter/nf_conntrack_l4proto.h
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -59,11 +59,11 @@ struct nf_conntrack_l4proto
 			   const struct nf_conntrack_tuple *);
 
 	/* Print out the private part of the conntrack. */
-	int (*print_conntrack)(struct seq_file *s, const struct nf_conn *);
+	int (*print_conntrack)(struct seq_file *s, struct nf_conn *);
 
 	/* convert protoinfo to nfnetink attributes */
 	int (*to_nlattr)(struct sk_buff *skb, struct nlattr *nla,
-			 const struct nf_conn *ct);
+			 struct nf_conn *ct);
 	/* Calculate protoinfo nlattr size */
 	int (*nlattr_size)(void);
 
diff --git a/include/net/netlink.h b/include/net/netlink.h
index eddb50289d6..007bdb07dab 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -940,6 +940,15 @@ static inline u64 nla_get_u64(const struct nlattr *nla)
 }
 
 /**
+ * nla_get_be64 - return payload of __be64 attribute
+ * @nla: __be64 netlink attribute
+ */
+static inline __be64 nla_get_be64(const struct nlattr *nla)
+{
+	return *(__be64 *) nla_data(nla);
+}
+
+/**
  * nla_get_flag - return payload of flag attribute
  * @nla: flag netlink attribute
  */
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
index 9dc58402bc0..ba1ba0c5efd 100644
--- a/include/net/netns/conntrack.h
+++ b/include/net/netns/conntrack.h
@@ -14,16 +14,17 @@ struct netns_ct {
 	struct hlist_nulls_head	*hash;
 	struct hlist_head	*expect_hash;
 	struct hlist_nulls_head	unconfirmed;
+	struct hlist_nulls_head	dying;
 	struct ip_conntrack_stat *stat;
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
-	struct nf_conntrack_ecache *ecache;
-#endif
+	int			sysctl_events;
+	unsigned int		sysctl_events_retry_timeout;
 	int			sysctl_acct;
 	int			sysctl_checksum;
 	unsigned int		sysctl_log_invalid; /* Log invalid packets */
 #ifdef CONFIG_SYSCTL
 	struct ctl_table_header	*sysctl_header;
 	struct ctl_table_header	*acct_sysctl_header;
+	struct ctl_table_header	*event_sysctl_header;
 #endif
 	int			hash_vmalloc;
 	int			expect_vmalloc;
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index e37fe3129c1..82a3191375f 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -41,16 +41,17 @@ static inline void *qdisc_priv(struct Qdisc *q)
 typedef u64	psched_time_t;
 typedef long	psched_tdiff_t;
 
-/* Avoid doing 64 bit divide by 1000 */
-#define PSCHED_US2NS(x)			((s64)(x) << 10)
-#define PSCHED_NS2US(x)			((x) >> 10)
+/* Avoid doing 64 bit divide */
+#define PSCHED_SHIFT			6
+#define PSCHED_TICKS2NS(x)		((s64)(x) << PSCHED_SHIFT)
+#define PSCHED_NS2TICKS(x)		((x) >> PSCHED_SHIFT)
 
-#define PSCHED_TICKS_PER_SEC		PSCHED_NS2US(NSEC_PER_SEC)
+#define PSCHED_TICKS_PER_SEC		PSCHED_NS2TICKS(NSEC_PER_SEC)
 #define PSCHED_PASTPERFECT		0
 
 static inline psched_time_t psched_get_time(void)
 {
-	return PSCHED_NS2US(ktime_to_ns(ktime_get()));
+	return PSCHED_NS2TICKS(ktime_to_ns(ktime_get()));
 }
 
 static inline psched_tdiff_t
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
new file mode 100644
index 00000000000..47995b81c5d
--- /dev/null
+++ b/include/net/regulatory.h
@@ -0,0 +1,101 @@
+#ifndef __NET_REGULATORY_H
+#define __NET_REGULATORY_H
+/*
+ * regulatory support structures
+ *
+ * Copyright 2008-2009	Luis R. Rodriguez <lrodriguez@atheros.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ *	outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+	ENVIRON_ANY,
+	ENVIRON_INDOOR,
+	ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * 	can be used by the wireless core to deal with conflicts
+ * 	and potentially inform users of which devices specifically
+ * 	cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * 	regulatory domain. We have a few special codes:
+ * 	00 - World regulatory domain
+ * 	99 - built by driver but a specific alpha2 cannot be determined
+ * 	98 - result of an intersection between two regulatory domains
+ * @intersect: indicates whether the wireless core should intersect
+ * 	the requested regulatory domain with the presently set regulatory
+ * 	domain.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * 	country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * 	indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+	int wiphy_idx;
+	enum nl80211_reg_initiator initiator;
+	char alpha2[2];
+	bool intersect;
+	u32 country_ie_checksum;
+	enum environment_cap country_ie_env;
+	struct list_head list;
+};
+
+struct ieee80211_freq_range {
+	u32 start_freq_khz;
+	u32 end_freq_khz;
+	u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+	u32 max_antenna_gain;
+	u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+	struct ieee80211_freq_range freq_range;
+	struct ieee80211_power_rule power_rule;
+	u32 flags;
+};
+
+struct ieee80211_regdomain {
+	u32 n_reg_rules;
+	char alpha2[2];
+	struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+{							\
+	.freq_range.start_freq_khz = MHZ_TO_KHZ(start),	\
+	.freq_range.end_freq_khz = MHZ_TO_KHZ(end),	\
+	.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw),	\
+	.power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
+	.power_rule.max_eirp = DBM_TO_MBM(eirp),	\
+	.flags = reg_flags,				\
+}
+
+#endif
diff --git a/include/net/route.h b/include/net/route.h
index 4e8cae0e584..40f6346ef49 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -210,7 +210,7 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt)
 
 static inline int inet_iif(const struct sk_buff *skb)
 {
-	return skb->rtable->rt_iif;
+	return skb_rtable(skb)->rt_iif;
 }
 
 #endif	/* _ROUTE_H */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 23f08fe1d50..edfcacf3250 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1939,10 +1939,8 @@ void sctp_association_free(struct sctp_association *);
 void sctp_association_put(struct sctp_association *);
 void sctp_association_hold(struct sctp_association *);
 
-struct sctp_transport *sctp_assoc_choose_init_transport(
-	struct sctp_association *);
-struct sctp_transport *sctp_assoc_choose_shutdown_transport(
-	struct sctp_association *);
+struct sctp_transport *sctp_assoc_choose_alter_transport(
+	struct sctp_association *, struct sctp_transport *);
 void sctp_assoc_update_retran_path(struct sctp_association *);
 struct sctp_transport *sctp_assoc_lookup_paddr(const struct sctp_association *,
 					  const union sctp_addr *);
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index b259fc5798f..1580c04f68b 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -147,6 +147,8 @@ enum sctp_optname {
 #define SCTP_GET_LOCAL_ADDRS	SCTP_GET_LOCAL_ADDRS
 	SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */
 #define SCTP_SOCKOPT_CONNECTX	SCTP_SOCKOPT_CONNECTX
+	SCTP_SOCKOPT_CONNECTX3, /* CONNECTX requests. (new implementation) */
+#define SCTP_SOCKOPT_CONNECTX3	SCTP_SOCKOPT_CONNECTX3
 };
 
 /*
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 57c93628695..8c842e06bec 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -153,6 +153,11 @@ struct linux_xfrm_mib {
 		per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field]--; \
 		put_cpu(); \
 	} while (0)
+#define SNMP_ADD_STATS(mib, field, addend) 	\
+	do { \
+		per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field] += addend; \
+		put_cpu(); \
+	} while (0)
 #define SNMP_ADD_STATS_BH(mib, field, addend) 	\
 	(per_cpu_ptr(mib[0], raw_smp_processor_id())->mibs[field] += addend)
 #define SNMP_ADD_STATS_USER(mib, field, addend) 	\
@@ -160,5 +165,17 @@ struct linux_xfrm_mib {
 		per_cpu_ptr(mib[1], get_cpu())->mibs[field] += addend; \
 		put_cpu(); \
 	} while (0)
-
+#define SNMP_UPD_PO_STATS(mib, basefield, addend)	\
+	do { \
+		__typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], get_cpu());\
+		ptr->mibs[basefield##PKTS]++; \
+		ptr->mibs[basefield##OCTETS] += addend;\
+		put_cpu(); \
+	} while (0)
+#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend)	\
+	do { \
+		__typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], raw_smp_processor_id());\
+		ptr->mibs[basefield##PKTS]++; \
+		ptr->mibs[basefield##OCTETS] += addend;\
+	} while (0)
 #endif
diff --git a/include/net/sock.h b/include/net/sock.h
index 4bb1ff9fd15..010e14a93c9 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1217,9 +1217,13 @@ static inline int skb_copy_to_page(struct sock *sk, char __user *from,
 
 static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
 {
-	sock_hold(sk);
 	skb->sk = sk;
 	skb->destructor = sock_wfree;
+	/*
+	 * We used to take a refcount on sk, but following operation
+	 * is enough to guarantee sk_free() wont free this sock until
+	 * all in-flight packets are completed
+	 */
 	atomic_add(skb->truesize, &sk->sk_wmem_alloc);
 }
 
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 646dbe3962e..19f4150f4d4 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -266,6 +266,19 @@ static inline int tcp_too_many_orphans(struct sock *sk, int num)
 		 atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2]);
 }
 
+/* syncookies: remember time of last synqueue overflow */
+static inline void tcp_synq_overflow(struct sock *sk)
+{
+	tcp_sk(sk)->rx_opt.ts_recent_stamp = jiffies;
+}
+
+/* syncookies: no recent synqueue overflow on this listening socket? */
+static inline int tcp_synq_no_recent_overflow(const struct sock *sk)
+{
+	unsigned long last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
+	return time_after(jiffies, last_overflow + TCP_TIMEOUT_INIT);
+}
+
 extern struct proto tcp_prot;
 
 #define TCP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.tcp_statistics, field)
@@ -889,30 +902,32 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	if (!sysctl_tcp_low_latency && tp->ucopy.task) {
-		__skb_queue_tail(&tp->ucopy.prequeue, skb);
-		tp->ucopy.memory += skb->truesize;
-		if (tp->ucopy.memory > sk->sk_rcvbuf) {
-			struct sk_buff *skb1;
-
-			BUG_ON(sock_owned_by_user(sk));
-
-			while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
-				sk_backlog_rcv(sk, skb1);
-				NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPPREQUEUEDROPPED);
-			}
-
-			tp->ucopy.memory = 0;
-		} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
-			wake_up_interruptible(sk->sk_sleep);
-			if (!inet_csk_ack_scheduled(sk))
-				inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
-						          (3 * tcp_rto_min(sk)) / 4,
-							  TCP_RTO_MAX);
+	if (sysctl_tcp_low_latency || !tp->ucopy.task)
+		return 0;
+
+	__skb_queue_tail(&tp->ucopy.prequeue, skb);
+	tp->ucopy.memory += skb->truesize;
+	if (tp->ucopy.memory > sk->sk_rcvbuf) {
+		struct sk_buff *skb1;
+
+		BUG_ON(sock_owned_by_user(sk));
+
+		while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
+			sk_backlog_rcv(sk, skb1);
+			NET_INC_STATS_BH(sock_net(sk),
+					 LINUX_MIB_TCPPREQUEUEDROPPED);
 		}
-		return 1;
+
+		tp->ucopy.memory = 0;
+	} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
+		wake_up_interruptible_poll(sk->sk_sleep,
+					   POLLIN | POLLRDNORM | POLLRDBAND);
+		if (!inet_csk_ack_scheduled(sk))
+			inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
+						  (3 * tcp_rto_min(sk)) / 4,
+						  TCP_RTO_MAX);
 	}
-	return 0;
+	return 1;
 }
 
 
diff --git a/include/net/wimax.h b/include/net/wimax.h
index 6b3824edb39..2af7bf839f2 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -253,7 +253,6 @@
 struct net_device;
 struct genl_info;
 struct wimax_dev;
-struct input_dev;
 
 /**
  * struct wimax_dev - Generic WiMAX device
@@ -293,8 +292,8 @@ struct input_dev;
  *     See wimax_reset()'s documentation.
  *
  * @name: [fill] A way to identify this device. We need to register a
- *     name with many subsystems (input for RFKILL, workqueue
- *     creation, etc). We can't use the network device name as that
+ *     name with many subsystems (rfkill, workqueue creation, etc).
+ *     We can't use the network device name as that
  *     might change and in some instances we don't know it yet (until
  *     we don't call register_netdev()). So we generate an unique one
  *     using the driver name and device bus id, place it here and use
@@ -316,9 +315,6 @@ struct input_dev;
  *
  * @rfkill: [private] integration into the RF-Kill infrastructure.
  *
- * @rfkill_input: [private] virtual input device to process the
- *     hardware RF Kill switches.
- *
  * @rf_sw: [private] State of the software radio switch (OFF/ON)
  *
  * @rf_hw: [private] State of the hardware radio switch (OFF/ON)
diff --git a/include/net/wireless.h b/include/net/wireless.h
deleted file mode 100644
index 64a76208580..00000000000
--- a/include/net/wireless.h
+++ /dev/null
@@ -1,472 +0,0 @@
-#ifndef __NET_WIRELESS_H
-#define __NET_WIRELESS_H
-
-/*
- * 802.11 device management
- *
- * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
- */
-
-#include <linux/netdevice.h>
-#include <linux/debugfs.h>
-#include <linux/list.h>
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-
-/**
- * enum ieee80211_band - supported frequency bands
- *
- * The bands are assigned this way because the supported
- * bitrates differ in these bands.
- *
- * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
- * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
- */
-enum ieee80211_band {
-	IEEE80211_BAND_2GHZ,
-	IEEE80211_BAND_5GHZ,
-
-	/* keep last */
-	IEEE80211_NUM_BANDS
-};
-
-/**
- * enum ieee80211_channel_flags - channel flags
- *
- * Channel flags set by the regulatory control code.
- *
- * @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- *	on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
- * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
- * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel
- * 	is not permitted.
- * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel
- * 	is not permitted.
- */
-enum ieee80211_channel_flags {
-	IEEE80211_CHAN_DISABLED		= 1<<0,
-	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
-	IEEE80211_CHAN_NO_IBSS		= 1<<2,
-	IEEE80211_CHAN_RADAR		= 1<<3,
-	IEEE80211_CHAN_NO_FAT_ABOVE	= 1<<4,
-	IEEE80211_CHAN_NO_FAT_BELOW	= 1<<5,
-};
-
-/**
- * struct ieee80211_channel - channel definition
- *
- * This structure describes a single channel for use
- * with cfg80211.
- *
- * @center_freq: center frequency in MHz
- * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
- * @hw_value: hardware-specific value for the channel
- * @flags: channel flags from &enum ieee80211_channel_flags.
- * @orig_flags: channel flags at registration time, used by regulatory
- *	code to support devices with additional restrictions
- * @band: band this channel belongs to.
- * @max_antenna_gain: maximum antenna gain in dBi
- * @max_power: maximum transmission power (in dBm)
- * @beacon_found: helper to regulatory code to indicate when a beacon
- *	has been found on this channel. Use regulatory_hint_found_beacon()
- *	to enable this, this is is useful only on 5 GHz band.
- * @orig_mag: internal use
- * @orig_mpwr: internal use
- */
-struct ieee80211_channel {
-	enum ieee80211_band band;
-	u16 center_freq;
-	u8 max_bandwidth;
-	u16 hw_value;
-	u32 flags;
-	int max_antenna_gain;
-	int max_power;
-	bool beacon_found;
-	u32 orig_flags;
-	int orig_mag, orig_mpwr;
-};
-
-/**
- * enum ieee80211_rate_flags - rate flags
- *
- * Hardware/specification flags for rates. These are structured
- * in a way that allows using the same bitrate structure for
- * different bands/PHY modes.
- *
- * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
- *	preamble on this bitrate; only relevant in 2.4GHz band and
- *	with CCK rates.
- * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
- *	when used with 802.11a (on the 5 GHz band); filled by the
- *	core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
- *	when used with 802.11b (on the 2.4 GHz band); filled by the
- *	core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
- *	when used with 802.11g (on the 2.4 GHz band); filled by the
- *	core code when registering the wiphy.
- * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
- */
-enum ieee80211_rate_flags {
-	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
-	IEEE80211_RATE_MANDATORY_A	= 1<<1,
-	IEEE80211_RATE_MANDATORY_B	= 1<<2,
-	IEEE80211_RATE_MANDATORY_G	= 1<<3,
-	IEEE80211_RATE_ERP_G		= 1<<4,
-};
-
-/**
- * struct ieee80211_rate - bitrate definition
- *
- * This structure describes a bitrate that an 802.11 PHY can
- * operate with. The two values @hw_value and @hw_value_short
- * are only for driver use when pointers to this structure are
- * passed around.
- *
- * @flags: rate-specific flags
- * @bitrate: bitrate in units of 100 Kbps
- * @hw_value: driver/hardware value for this rate
- * @hw_value_short: driver/hardware value for this rate when
- *	short preamble is used
- */
-struct ieee80211_rate {
-	u32 flags;
-	u16 bitrate;
-	u16 hw_value, hw_value_short;
-};
-
-/**
- * struct ieee80211_sta_ht_cap - STA's HT capabilities
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT capabilities for an STA.
- *
- * @ht_supported: is HT supported by the STA
- * @cap: HT capabilities map as described in 802.11n spec
- * @ampdu_factor: Maximum A-MPDU length factor
- * @ampdu_density: Minimum A-MPDU spacing
- * @mcs: Supported MCS rates
- */
-struct ieee80211_sta_ht_cap {
-	u16 cap; /* use IEEE80211_HT_CAP_ */
-	bool ht_supported;
-	u8 ampdu_factor;
-	u8 ampdu_density;
-	struct ieee80211_mcs_info mcs;
-};
-
-/**
- * struct ieee80211_supported_band - frequency band definition
- *
- * This structure describes a frequency band a wiphy
- * is able to operate in.
- *
- * @channels: Array of channels the hardware can operate in
- *	in this band.
- * @band: the band this structure represents
- * @n_channels: Number of channels in @channels
- * @bitrates: Array of bitrates the hardware can operate with
- *	in this band. Must be sorted to give a valid "supported
- *	rates" IE, i.e. CCK rates first, then OFDM.
- * @n_bitrates: Number of bitrates in @bitrates
- */
-struct ieee80211_supported_band {
-	struct ieee80211_channel *channels;
-	struct ieee80211_rate *bitrates;
-	enum ieee80211_band band;
-	int n_channels;
-	int n_bitrates;
-	struct ieee80211_sta_ht_cap ht_cap;
-};
-
-/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
- * 	has its own custom regulatory domain and cannot identify the
- * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * 	we will disregard the first regulatory hint (when the
- * 	initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * 	regulatory domain settings until it gets its own regulatory domain
- * 	via its regulatory_hint(). After its gets its own regulatory domain
- * 	it will only allow further regulatory domain settings to further
- * 	enhance compliance. For example if channel 13 and 14 are disabled
- * 	by this regulatory domain no user regulatory domain can enable these
- * 	channels at a later time. This can be used for devices which do not
- * 	have calibration information gauranteed for frequencies or settings
- * 	outside of its regulatory domain.
- * @reg_notifier: the driver's regulatory notification callback
- * @regd: the driver's regulatory domain, if one was requested via
- * 	the regulatory_hint() API. This can be used by the driver
- *	on the reg_notifier() if it chooses to ignore future
- *	regulatory domain changes caused by other drivers.
- * @signal_type: signal type reported in &struct cfg80211_bss.
- */
-struct wiphy {
-	/* assign these fields before you register the wiphy */
-
-	/* permanent MAC address */
-	u8 perm_addr[ETH_ALEN];
-
-	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
-	u16 interface_modes;
-
-	bool custom_regulatory;
-	bool strict_regulatory;
-
-	enum cfg80211_signal_type signal_type;
-
-	int bss_priv_size;
-	u8 max_scan_ssids;
-
-	/* If multiple wiphys are registered and you're handed e.g.
-	 * a regular netdev with assigned ieee80211_ptr, you won't
-	 * know whether it points to a wiphy your driver has registered
-	 * or not. Assign this to something global to your driver to
-	 * help determine whether you own this wiphy or not. */
-	void *privid;
-
-	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
-
-	/* Lets us get back the wiphy on the callback */
-	int (*reg_notifier)(struct wiphy *wiphy,
-			    struct regulatory_request *request);
-
-	/* fields below are read-only, assigned by cfg80211 */
-
-	const struct ieee80211_regdomain *regd;
-
-	/* the item in /sys/class/ieee80211/ points to this,
-	 * you need use set_wiphy_dev() (see below) */
-	struct device dev;
-
-	/* dir in debugfs: ieee80211/<wiphyname> */
-	struct dentry *debugfsdir;
-
-	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
-};
-
-/** struct wireless_dev - wireless per-netdev state
- *
- * This structure must be allocated by the driver/stack
- * that uses the ieee80211_ptr field in struct net_device
- * (this is intentional so it can be allocated along with
- * the netdev.)
- *
- * @wiphy: pointer to hardware description
- * @iftype: interface type
- */
-struct wireless_dev {
-	struct wiphy *wiphy;
-	enum nl80211_iftype iftype;
-
-	/* private to the generic wireless code */
-	struct list_head list;
-	struct net_device *netdev;
-};
-
-/**
- * wiphy_priv - return priv from wiphy
- */
-static inline void *wiphy_priv(struct wiphy *wiphy)
-{
-	BUG_ON(!wiphy);
-	return &wiphy->priv;
-}
-
-/**
- * set_wiphy_dev - set device pointer for wiphy
- */
-static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
-{
-	wiphy->dev.parent = dev;
-}
-
-/**
- * wiphy_dev - get wiphy dev pointer
- */
-static inline struct device *wiphy_dev(struct wiphy *wiphy)
-{
-	return wiphy->dev.parent;
-}
-
-/**
- * wiphy_name - get wiphy name
- */
-static inline const char *wiphy_name(struct wiphy *wiphy)
-{
-	return dev_name(&wiphy->dev);
-}
-
-/**
- * wdev_priv - return wiphy priv from wireless_dev
- */
-static inline void *wdev_priv(struct wireless_dev *wdev)
-{
-	BUG_ON(!wdev);
-	return wiphy_priv(wdev->wiphy);
-}
-
-/**
- * wiphy_new - create a new wiphy for use with cfg80211
- *
- * create a new wiphy and associate the given operations with it.
- * @sizeof_priv bytes are allocated for private use.
- *
- * the returned pointer must be assigned to each netdev's
- * ieee80211_ptr for proper operation.
- */
-struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv);
-
-/**
- * wiphy_register - register a wiphy with cfg80211
- *
- * register the given wiphy
- *
- * Returns a non-negative wiphy index or a negative error code.
- */
-extern int wiphy_register(struct wiphy *wiphy);
-
-/**
- * wiphy_unregister - deregister a wiphy from cfg80211
- *
- * unregister a device with the given priv pointer.
- * After this call, no more requests can be made with this priv
- * pointer, but the call may sleep to wait for an outstanding
- * request that is being handled.
- */
-extern void wiphy_unregister(struct wiphy *wiphy);
-
-/**
- * wiphy_free - free wiphy
- */
-extern void wiphy_free(struct wiphy *wiphy);
-
-/**
- * ieee80211_channel_to_frequency - convert channel number to frequency
- */
-extern int ieee80211_channel_to_frequency(int chan);
-
-/**
- * ieee80211_frequency_to_channel - convert frequency to channel number
- */
-extern int ieee80211_frequency_to_channel(int freq);
-
-/*
- * Name indirection necessary because the ieee80211 code also has
- * a function named "ieee80211_get_channel", so if you include
- * cfg80211's header file you get cfg80211's version, if you try
- * to include both header files you'll (rightfully!) get a symbol
- * clash.
- */
-extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
-							 int freq);
-/**
- * ieee80211_get_channel - get channel struct from wiphy for specified frequency
- */
-static inline struct ieee80211_channel *
-ieee80211_get_channel(struct wiphy *wiphy, int freq)
-{
-	return __ieee80211_get_channel(wiphy, freq);
-}
-
-/**
- * ieee80211_get_response_rate - get basic rate for a given rate
- *
- * @sband: the band to look for rates in
- * @basic_rates: bitmap of basic rates
- * @bitrate: the bitrate for which to find the basic rate
- *
- * This function returns the basic rate corresponding to a given
- * bitrate, that is the next lower bitrate contained in the basic
- * rate map, which is, for this function, given as a bitmap of
- * indices of rates in the band's bitrate table.
- */
-struct ieee80211_rate *
-ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
-			    u32 basic_rates, int bitrate);
-
-/**
- * regulatory_hint - driver hint to the wireless core a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- *	conflicts)
- * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
- * 	should be in. If @rd is set this should be NULL. Note that if you
- * 	set this to NULL you should still set rd->alpha2 to some accepted
- * 	alpha2.
- *
- * Wireless drivers can use this function to hint to the wireless core
- * what it believes should be the current regulatory domain by
- * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
- * domain should be in or by providing a completely build regulatory domain.
- * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
- * for a regulatory domain structure for the respective country.
- *
- * The wiphy must have been registered to cfg80211 prior to this call.
- * For cfg80211 drivers this means you must first use wiphy_register(),
- * for mac80211 drivers you must first use ieee80211_register_hw().
- *
- * Drivers should check the return value, its possible you can get
- * an -ENOMEM.
- */
-extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
-
-/**
- * regulatory_hint_11d - hints a country IE as a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- *	conflicts)
- * @country_ie: pointer to the country IE
- * @country_ie_len: length of the country IE
- *
- * We will intersect the rd with the what CRDA tells us should apply
- * for the alpha2 this country IE belongs to, this prevents APs from
- * sending us incorrect or outdated information against a country.
- */
-extern void regulatory_hint_11d(struct wiphy *wiphy,
-				u8 *country_ie,
-				u8 country_ie_len);
-/**
- * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
- * @wiphy: the wireless device we want to process the regulatory domain on
- * @regd: the custom regulatory domain to use for this wiphy
- *
- * Drivers can sometimes have custom regulatory domains which do not apply
- * to a specific country. Drivers can use this to apply such custom regulatory
- * domains. This routine must be called prior to wiphy registration. The
- * custom regulatory domain will be trusted completely and as such previous
- * default channel settings will be disregarded. If no rule is found for a
- * channel on the regulatory domain the channel will be disabled.
- */
-extern void wiphy_apply_custom_regulatory(
-	struct wiphy *wiphy,
-	const struct ieee80211_regdomain *regd);
-
-/**
- * freq_reg_info - get regulatory information for the given frequency
- * @wiphy: the wiphy for which we want to process this rule for
- * @center_freq: Frequency in KHz for which we want regulatory information for
- * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
- * 	you can set this to 0. If this frequency is allowed we then set
- * 	this value to the maximum allowed bandwidth.
- * @reg_rule: the regulatory rule which we have for this frequency
- *
- * Use this function to get the regulatory rule for a specific frequency on
- * a given wireless device. If the device has a specific regulatory domain
- * it wants to follow we respect that unless a country IE has been received
- * and processed already.
- *
- * Returns 0 if it was able to find a valid regulatory rule which does
- * apply to the given center_freq otherwise it returns non-zero. It will
- * also return -ERANGE if we determine the given center_freq does not even have
- * a regulatory rule for a frequency range in the center_freq's band. See
- * freq_in_rule_band() for our current definition of a band -- this is purely
- * subjective and right now its 802.11 specific.
- */
-extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
-			 const struct ieee80211_reg_rule **reg_rule);
-
-#endif /* __NET_WIRELESS_H */
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 2e9f5c0018a..736bca45088 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -994,7 +994,7 @@ static inline int __xfrm_policy_check2(struct sock *sk, int dir,
 		return __xfrm_policy_check(sk, ndir, skb, family);
 
 	return	(!net->xfrm.policy_count[dir] && !skb->sp) ||
-		(skb->dst->flags & DST_NOPOLICY) ||
+		(skb_dst(skb)->flags & DST_NOPOLICY) ||
 		__xfrm_policy_check(sk, ndir, skb, family);
 }
 
@@ -1048,7 +1048,7 @@ static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 	struct net *net = dev_net(skb->dev);
 
 	return	!net->xfrm.policy_count[XFRM_POLICY_OUT] ||
-		(skb->dst->flags & DST_NOXFRM) ||
+		(skb_dst(skb)->flags & DST_NOXFRM) ||
 		__xfrm_route_forward(skb, family);
 }
 
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
index 0627a9ae634..3d138c1fcf8 100644
--- a/include/scsi/fc/fc_fip.h
+++ b/include/scsi/fc/fc_fip.h
@@ -22,13 +22,6 @@
  * http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
  */
 
-/*
- * The FIP ethertype eventually goes in net/if_ether.h.
- */
-#ifndef ETH_P_FIP
-#define ETH_P_FIP	0x8914	/* FIP Ethertype */
-#endif
-
 #define FIP_DEF_PRI	128	/* default selection priority */
 #define FIP_DEF_FC_MAP	0x0efc00 /* default FCoE MAP (MAC OUI) value */
 #define FIP_DEF_FKA	8000	/* default FCF keep-alive/advert period (mS) */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index d0ed5226f8c..4426f00da5f 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -22,6 +22,11 @@
 #define ISCSI_IF_H
 
 #include <scsi/iscsi_proto.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#define ISCSI_NL_GRP_ISCSID	1
+#define ISCSI_NL_GRP_UIP	2
 
 #define UEVENT_BASE			10
 #define KEVENT_BASE			100
@@ -50,7 +55,10 @@ enum iscsi_uevent_e {
 	ISCSI_UEVENT_TGT_DSCVR		= UEVENT_BASE + 15,
 	ISCSI_UEVENT_SET_HOST_PARAM	= UEVENT_BASE + 16,
 	ISCSI_UEVENT_UNBIND_SESSION	= UEVENT_BASE + 17,
-	ISCSI_UEVENT_CREATE_BOUND_SESSION	= UEVENT_BASE + 18,
+	ISCSI_UEVENT_CREATE_BOUND_SESSION		= UEVENT_BASE + 18,
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST	= UEVENT_BASE + 19,
+
+	ISCSI_UEVENT_PATH_UPDATE	= UEVENT_BASE + 20,
 
 	/* up events */
 	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
@@ -59,6 +67,9 @@ enum iscsi_uevent_e {
 	ISCSI_KEVENT_DESTROY_SESSION	= KEVENT_BASE + 4,
 	ISCSI_KEVENT_UNBIND_SESSION	= KEVENT_BASE + 5,
 	ISCSI_KEVENT_CREATE_SESSION	= KEVENT_BASE + 6,
+
+	ISCSI_KEVENT_PATH_REQ		= KEVENT_BASE + 7,
+	ISCSI_KEVENT_IF_DOWN		= KEVENT_BASE + 8,
 };
 
 enum iscsi_tgt_dscvr {
@@ -131,6 +142,10 @@ struct iscsi_uevent {
 		struct msg_transport_connect {
 			uint32_t	non_blocking;
 		} ep_connect;
+		struct msg_transport_connect_through_host {
+			uint32_t	host_no;
+			uint32_t	non_blocking;
+		} ep_connect_through_host;
 		struct msg_transport_poll {
 			uint64_t	ep_handle;
 			uint32_t	timeout_ms;
@@ -154,6 +169,9 @@ struct iscsi_uevent {
 			uint32_t	param; /* enum iscsi_host_param */
 			uint32_t	len;
 		} set_host_param;
+		struct msg_set_path {
+			uint32_t	host_no;
+		} set_path;
 	} u;
 	union {
 		/* messages k -> u */
@@ -187,10 +205,39 @@ struct iscsi_uevent {
 		struct msg_transport_connect_ret {
 			uint64_t	handle;
 		} ep_connect_ret;
+		struct msg_req_path {
+			uint32_t	host_no;
+		} req_path;
+		struct msg_notify_if_down {
+			uint32_t	host_no;
+		} notify_if_down;
 	} r;
 } __attribute__ ((aligned (sizeof(uint64_t))));
 
 /*
+ * To keep the struct iscsi_uevent size the same for userspace code
+ * compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
+ * ISCSI_KEVENT_PATH_REQ is defined separately and comes after the
+ * struct iscsi_uevent in the NETLINK_ISCSI message.
+ */
+struct iscsi_path {
+	uint64_t	handle;
+	uint8_t		mac_addr[6];
+	uint8_t		mac_addr_old[6];
+	uint32_t	ip_addr_len;	/* 4 or 16 */
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} src;
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} dst;
+	uint16_t	vlan_id;
+	uint16_t	pmtu;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+/*
  * Common error codes
  */
 enum iscsi_err {
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 45f9cc642c4..ebdd9f4cf07 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -679,6 +679,7 @@ struct fc_lport {
 	unsigned int		e_d_tov;
 	unsigned int		r_a_tov;
 	u8			max_retry_count;
+	u8			max_rport_retry_count;
 	u16			link_speed;
 	u16			link_supported_speeds;
 	u16			lro_xid;	/* max xid for fcoe lro */
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 666cc131732..b2410605b74 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -73,6 +73,7 @@ enum fip_state {
  * @link:	current link status for libfc.
  * @last_link:	last link state reported to libfc.
  * @map_dest:	use the FC_MAP mode for destination MAC addresses.
+ * @spma:	supports SPMA server-provided MACs mode
  * @dest_addr:	MAC address of the selected FC forwarder.
  * @ctl_src_addr: the native MAC address of our local port.
  * @data_src_addr: the assigned MAC address for the local port after FLOGI.
@@ -104,6 +105,7 @@ struct fcoe_ctlr {
 	u8 link;
 	u8 last_link;
 	u8 map_dest;
+	u8 spma;
 	u8 dest_addr[ETH_ALEN];
 	u8 ctl_src_addr[ETH_ALEN];
 	u8 data_src_addr[ETH_ALEN];
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 0289f5745fb..196525cd402 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -82,9 +82,12 @@ enum {
 
 
 enum {
+	ISCSI_TASK_FREE,
 	ISCSI_TASK_COMPLETED,
 	ISCSI_TASK_PENDING,
 	ISCSI_TASK_RUNNING,
+	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
+	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
 };
 
 struct iscsi_r2t_info {
@@ -181,9 +184,7 @@ struct iscsi_conn {
 
 	/* xmit */
 	struct list_head	mgmtqueue;	/* mgmt (control) xmit queue */
-	struct list_head	mgmt_run_list;	/* list of control tasks */
-	struct list_head	xmitqueue;	/* data-path cmd queue */
-	struct list_head	run_list;	/* list of cmds in progress */
+	struct list_head	cmdqueue;	/* data-path cmd queue */
 	struct list_head	requeue;	/* tasks needing another run */
 	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
 	unsigned long		suspend_tx;	/* suspend Tx */
@@ -406,6 +407,7 @@ extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
 				char *, int);
 extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
 extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
 extern void iscsi_requeue_task(struct iscsi_task *task);
 extern void iscsi_put_task(struct iscsi_task *task);
 extern void __iscsi_get_task(struct iscsi_task *task);
diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h
index f888a6fda07..56e920ade32 100644
--- a/include/scsi/osd_attributes.h
+++ b/include/scsi/osd_attributes.h
@@ -29,6 +29,7 @@ enum {
 	OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1,
 	OSD_APAGE_PARTITION_QUOTAS	= OSD_APAGE_PARTITION_FIRST + 2,
 	OSD_APAGE_PARTITION_TIMESTAMP	= OSD_APAGE_PARTITION_FIRST + 3,
+	OSD_APAGE_PARTITION_ATTR_ACCESS = OSD_APAGE_PARTITION_FIRST + 4,
 	OSD_APAGE_PARTITION_SECURITY	= OSD_APAGE_PARTITION_FIRST + 5,
 	OSD_APAGE_PARTITION_LAST	= 0x5FFFFFFF,
 
@@ -51,7 +52,9 @@ enum {
 	OSD_APAGE_RESERVED_TYPE_LAST	= 0xEFFFFFFF,
 
 	OSD_APAGE_COMMON_FIRST		= 0xF0000000,
-	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFE,
+	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFD,
+
+	OSD_APAGE_CURRENT_COMMAND	= 0xFFFFFFFE,
 
 	OSD_APAGE_REQUEST_ALL		= 0xFFFFFFFF,
 };
@@ -106,10 +109,30 @@ enum {
 	OSD_ATTR_RI_PRODUCT_REVISION_LEVEL   = 0x7,   /* 4        */
 	OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER    = 0x8,   /* variable */
 	OSD_ATTR_RI_OSD_NAME                 = 0x9,   /* variable */
+	OSD_ATTR_RI_MAX_CDB_CONTINUATION_LEN = 0xA,   /* 4        */
 	OSD_ATTR_RI_TOTAL_CAPACITY           = 0x80,  /* 8        */
 	OSD_ATTR_RI_USED_CAPACITY            = 0x81,  /* 8        */
 	OSD_ATTR_RI_NUMBER_OF_PARTITIONS     = 0xC0,  /* 8        */
 	OSD_ATTR_RI_CLOCK                    = 0x100, /* 6        */
+	OARI_DEFAULT_ISOLATION_METHOD        = 0X110, /* 1        */
+	OARI_SUPPORTED_ISOLATION_METHODS     = 0X111, /* 32       */
+
+	OARI_DATA_ATOMICITY_GUARANTEE                   = 0X120,   /* 8       */
+	OARI_DATA_ATOMICITY_ALIGNMENT                   = 0X121,   /* 8       */
+	OARI_ATTRIBUTES_ATOMICITY_GUARANTEE             = 0X122,   /* 8       */
+	OARI_DATA_ATTRIBUTES_ATOMICITY_MULTIPLIER       = 0X123,   /* 1       */
+
+	OARI_MAXIMUM_SNAPSHOTS_COUNT                    = 0X1C1,    /* 0 or 4 */
+	OARI_MAXIMUM_CLONES_COUNT                       = 0X1C2,    /* 0 or 4 */
+	OARI_MAXIMUM_BRANCH_DEPTH                       = 0X1CC,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_FIRST  = 0X200,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_LAST   = 0X2ff,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_FIRST = 0X300,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_LAST  = 0X30F,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_DUPLICATED_OBJECT_FREEZING     = 0X310,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_SNAPSHOT_REFRESHING            = 0X311,    /* 0 or 1 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_FIRST = 0X7000001,/* 0 or 4 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_LAST  = 0X700FFFF,/* 0 or 4 */
 };
 /* Root_Information_attributes_page does not have a get_page structure */
 
@@ -120,7 +143,15 @@ enum {
 	OSD_ATTR_PI_PARTITION_ID            = 0x1,     /* 8        */
 	OSD_ATTR_PI_USERNAME                = 0x9,     /* variable */
 	OSD_ATTR_PI_USED_CAPACITY           = 0x81,    /* 8        */
+	OSD_ATTR_PI_USED_CAPACITY_INCREMENT = 0x84,    /* 0 or 8   */
 	OSD_ATTR_PI_NUMBER_OF_OBJECTS       = 0xC1,    /* 8        */
+
+	OSD_ATTR_PI_ACTUAL_DATA_SPACE                      = 0xD1, /* 0 or 8 */
+	OSD_ATTR_PI_RESERVED_DATA_SPACE                    = 0xD2, /* 0 or 8 */
+	OSD_ATTR_PI_DEFAULT_SNAPSHOT_DUPLICATION_METHOD    = 0x200,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_DUPLICATION_METHOD       = 0x201,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_SP_TIME_OF_DUPLICATION         = 0x300,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_TIME_OF_DUPLICATION      = 0x301,/* 0 or 4 */
 };
 /* Partition Information attributes page does not have a get_page structure */
 
@@ -131,6 +162,7 @@ enum {
 	OSD_ATTR_CI_PARTITION_ID           = 0x1,       /* 8        */
 	OSD_ATTR_CI_COLLECTION_OBJECT_ID   = 0x2,       /* 8        */
 	OSD_ATTR_CI_USERNAME               = 0x9,       /* variable */
+	OSD_ATTR_CI_COLLECTION_TYPE        = 0xA,       /* 1        */
 	OSD_ATTR_CI_USED_CAPACITY          = 0x81,      /* 8        */
 };
 /* Collection Information attributes page does not have a get_page structure */
@@ -144,6 +176,8 @@ enum {
 	OSD_ATTR_OI_USERNAME             = 0x9,       /* variable */
 	OSD_ATTR_OI_USED_CAPACITY        = 0x81,      /* 8        */
 	OSD_ATTR_OI_LOGICAL_LENGTH       = 0x82,      /* 8        */
+	SD_ATTR_OI_ACTUAL_DATA_SPACE     = 0XD1,      /* 0 OR 8   */
+	SD_ATTR_OI_RESERVED_DATA_SPACE   = 0XD2,      /* 0 OR 8   */
 };
 /* Object Information attributes page does not have a get_page structure */
 
@@ -248,7 +282,18 @@ struct object_timestamps_attributes_page {
 	struct osd_timestamp data_modified_time;
 }  __packed;
 
-/* 7.1.2.19 Collections attributes page */
+/* OSD2r05: 7.1.3.19 Attributes Access attributes page
+ * (OSD_APAGE_PARTITION_ATTR_ACCESS)
+ *
+ * each attribute is of the form below. Total array length is deduced
+ * from the attribute's length
+ * (See allowed_attributes_access of the struct osd_cap_object_descriptor)
+ */
+struct attributes_access_attr {
+	struct osd_attributes_list_attrid attr_list[0];
+} __packed;
+
+/* OSD2r05: 7.1.2.21 Collections attributes page */
 /* TBD */
 
 /* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */
@@ -324,4 +369,29 @@ struct object_security_attributes_page {
 	__be32 policy_access_tag;
 }  __packed;
 
+/* OSD2r05: 7.1.3.31 Current Command attributes page
+ * (OSD_APAGE_CURRENT_COMMAND)
+ */
+enum {
+	OSD_ATTR_CC_RESPONSE_INTEGRITY_CHECK_VALUE     = 0x1, /* 32  */
+	OSD_ATTR_CC_OBJECT_TYPE                        = 0x2, /* 1   */
+	OSD_ATTR_CC_PARTITION_ID                       = 0x3, /* 8   */
+	OSD_ATTR_CC_OBJECT_ID                          = 0x4, /* 8   */
+	OSD_ATTR_CC_STARTING_BYTE_ADDRESS_OF_APPEND    = 0x5, /* 8   */
+	OSD_ATTR_CC_CHANGE_IN_USED_CAPACITY            = 0x6, /* 8   */
+};
+
+/*TBD: osdv1_current_command_attributes_page */
+
+struct osdv2_current_command_attributes_page {
+	struct osd_attr_page_header hdr;  /* id=0xFFFFFFFE, size=0x44 */
+	u8 response_integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+	u8 object_type;
+	u8 reserved[3];
+	__be64 partition_id;
+	__be64 object_id;
+	__be64 starting_byte_address_of_append;
+	__be64 change_in_used_capacity;
+};
+
 #endif /*ndef __OSD_ATTRIBUTES_H__*/
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index b24d9616eb4..02bd9f71635 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -18,6 +18,7 @@
 #include "osd_types.h"
 
 #include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
 
 /* Note: "NI" in comments below means "Not Implemented yet" */
 
@@ -47,6 +48,7 @@ enum osd_std_version {
  */
 struct osd_dev {
 	struct scsi_device *scsi_device;
+	struct file *file;
 	unsigned def_timeout;
 
 #ifdef OSD_VER1_SUPPORT
@@ -69,6 +71,10 @@ void osd_dev_fini(struct osd_dev *od);
 
 /* some hi level device operations */
 int osd_auto_detect_ver(struct osd_dev *od, void *caps);    /* GFP_KERNEL */
+static inline struct request_queue *osd_request_queue(struct osd_dev *od)
+{
+	return od->scsi_device->request_queue;
+}
 
 /* we might want to use function vector in the future */
 static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v)
@@ -363,7 +369,9 @@ void osd_req_create_object(struct osd_request *or, struct osd_obj_id *);
 void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *);
 
 void osd_req_write(struct osd_request *or,
-	const struct osd_obj_id *, struct bio *data_out, u64 offset);
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
 void osd_req_append(struct osd_request *or,
 	const struct osd_obj_id *, struct bio *data_out);/* NI */
 void osd_req_create_write(struct osd_request *or,
@@ -378,7 +386,9 @@ void osd_req_flush_object(struct osd_request *or,
 	/*V2*/ u64 offset, /*V2*/ u64 len);
 
 void osd_req_read(struct osd_request *or,
-	const struct osd_obj_id *, struct bio *data_in, u64 offset);
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
 
 /*
  * Root/Partition/Collection/Object Attributes commands
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index 62b2ab8c69d..2cc8e8b1cc1 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -303,7 +303,15 @@ enum osd_service_actions {
 	OSD_ACT_V2(REMOVE_MEMBER_OBJECTS,	0x21)
 	OSD_ACT_V2(GET_MEMBER_ATTRIBUTES,	0x22)
 	OSD_ACT_V2(SET_MEMBER_ATTRIBUTES,	0x23)
+
+	OSD_ACT_V2(CREATE_CLONE,		0x28)
+	OSD_ACT_V2(CREATE_SNAPSHOT,		0x29)
+	OSD_ACT_V2(DETACH_CLONE,		0x2A)
+	OSD_ACT_V2(REFRESH_SNAPSHOT_CLONE,	0x2B)
+	OSD_ACT_V2(RESTORE_PARTITION_FROM_SNAPSHOT, 0x2C)
+
 	OSD_ACT_V2(READ_MAP,			0x31)
+	OSD_ACT_V2(READ_MAPS_COMPARE,		0x32)
 
 	OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND,	0x8F7E, 0x8F7C)
 	OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT,	0x8F7F, 0x8F7D)
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 457588e1119..349c7f30720 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -126,12 +126,14 @@ struct iscsi_transport {
 			       int *index, int *age);
 
 	void (*session_recovery_timedout) (struct iscsi_cls_session *session);
-	struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr,
+	struct iscsi_endpoint *(*ep_connect) (struct Scsi_Host *shost,
+					      struct sockaddr *dst_addr,
 					      int non_blocking);
 	int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
 	void (*ep_disconnect) (struct iscsi_endpoint *ep);
 	int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
 			  uint32_t enable, struct sockaddr *dst_addr);
+	int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
 };
 
 /*
@@ -148,6 +150,10 @@ extern void iscsi_conn_error_event(struct iscsi_cls_conn *conn,
 extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 			  char *data, uint32_t data_size);
 
+extern int iscsi_offload_mesg(struct Scsi_Host *shost,
+			      struct iscsi_transport *transport, uint32_t type,
+			      char *data, uint16_t data_size);
+
 struct iscsi_cls_conn {
 	struct list_head conn_list;	/* item in connlist */
 	void *dd_data;			/* LLD private data */
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 6add80fc251..82aed3f4753 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -255,6 +255,7 @@ typedef int __bitwise snd_pcm_subformat_t;
 #define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
 #define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
 #define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+#define SNDRV_PCM_INFO_FIFO_IN_FRAMES	0x80000000	/* internal kernel flag - FIFO size is in frames */
 
 typedef int __bitwise snd_pcm_state_t;
 #define	SNDRV_PCM_STATE_OPEN		((__force snd_pcm_state_t) 0) /* stream is open */
diff --git a/include/sound/core.h b/include/sound/core.h
index 3dea79829ac..309cb9659a0 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -300,19 +300,10 @@ int snd_card_create(int idx, const char *id,
 		    struct module *module, int extra_size,
 		    struct snd_card **card_ret);
 
-static inline __deprecated
-struct snd_card *snd_card_new(int idx, const char *id,
-			      struct module *module, int extra_size)
-{
-	struct snd_card *card;
-	if (snd_card_create(idx, id, module, extra_size, &card) < 0)
-		return NULL;
-	return card;
-}
-
 int snd_card_disconnect(struct snd_card *card);
 int snd_card_free(struct snd_card *card);
 int snd_card_free_when_closed(struct snd_card *card);
+void snd_card_set_id(struct snd_card *card, const char *id);
 int snd_card_register(struct snd_card *card);
 int snd_card_info_init(void);
 int snd_card_info_done(void);
diff --git a/include/sound/driver.h b/include/sound/driver.h
deleted file mode 100644
index f0359437d01..00000000000
--- a/include/sound/driver.h
+++ /dev/null
@@ -1 +0,0 @@
-#warning "This file is deprecated"
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index c1729689161..23893523dc8 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -98,6 +98,7 @@ struct snd_pcm_ops {
 #define SNDRV_PCM_IOCTL1_INFO		1
 #define SNDRV_PCM_IOCTL1_CHANNEL_INFO	2
 #define SNDRV_PCM_IOCTL1_GSTATE		3
+#define SNDRV_PCM_IOCTL1_FIFO_SIZE	4
 
 #define SNDRV_PCM_TRIGGER_STOP		0
 #define SNDRV_PCM_TRIGGER_START		1
@@ -270,6 +271,7 @@ struct snd_pcm_runtime {
 	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
 	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
 	unsigned long hw_ptr_jiffies;	/* Time when hw_ptr is updated */
+	snd_pcm_sframes_t delay;	/* extra delay; typically FIFO size */
 
 	/* -- HW params -- */
 	snd_pcm_access_t access;	/* access mode */
@@ -486,80 +488,6 @@ void snd_pcm_detach_substream(struct snd_pcm_substream *substream);
 void snd_pcm_vma_notify_data(void *client, void *data);
 int snd_pcm_mmap_data(struct snd_pcm_substream *substream, struct file *file, struct vm_area_struct *area);
 
-#if BITS_PER_LONG >= 64
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	*rem = *n % div;
-	*n /= div;
-}
-
-#elif defined(i386)
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	u_int32_t low, high;
-	low = *n & 0xffffffff;
-	high = *n >> 32;
-	if (high) {
-		u_int32_t high1 = high % div;
-		high /= div;
-		asm("divl %2":"=a" (low), "=d" (*rem):"rm" (div), "a" (low), "d" (high1));
-		*n = (u_int64_t)high << 32 | low;
-	} else {
-		*n = low / div;
-		*rem = low % div;
-	}
-}
-#else
-
-static inline void divl(u_int32_t high, u_int32_t low,
-			u_int32_t div,
-			u_int32_t *q, u_int32_t *r)
-{
-	u_int64_t n = (u_int64_t)high << 32 | low;
-	u_int64_t d = (u_int64_t)div << 31;
-	u_int32_t q1 = 0;
-	int c = 32;
-	while (n > 0xffffffffU) {
-		q1 <<= 1;
-		if (n >= d) {
-			n -= d;
-			q1 |= 1;
-		}
-		d >>= 1;
-		c--;
-	}
-	q1 <<= c;
-	if (n) {
-		low = n;
-		*q = q1 | (low / div);
-		*r = low % div;
-	} else {
-		*r = 0;
-		*q = q1;
-	}
-	return;
-}
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	u_int32_t low, high;
-	low = *n & 0xffffffff;
-	high = *n >> 32;
-	if (high) {
-		u_int32_t high1 = high % div;
-		u_int32_t low1 = low;
-		high /= div;
-		divl(high1, low1, div, &low, rem);
-		*n = (u_int64_t)high << 32 | low;
-	} else {
-		*n = low / div;
-		*rem = low % div;
-	}
-}
-#endif
-
 /*
  *  PCM library
  */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 13676472ddf..352d7eee9b6 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -45,24 +45,6 @@ struct snd_pcm_substream;
 #define SND_SOC_DAIFMT_GATED		(1 << 4) /* clock is gated */
 
 /*
- * DAI Left/Right Clocks.
- *
- * Specifies whether the DAI can support different samples for similtanious
- * playback and capture. This usually requires a seperate physical frame
- * clock for playback and capture.
- */
-#define SND_SOC_DAIFMT_SYNC		(0 << 5) /* Tx FRM = Rx FRM */
-#define SND_SOC_DAIFMT_ASYNC		(1 << 5) /* Tx FRM ~ Rx FRM */
-
-/*
- * TDM
- *
- * Time Division Multiplexing. Allows PCM data to be multplexed with other
- * data on the DAI.
- */
-#define SND_SOC_DAIFMT_TDM		(1 << 6)
-
-/*
  * DAI hardware signal inversions.
  *
  * Specifies whether the DAI can also support inverted clocks for the specified
@@ -96,6 +78,10 @@ struct snd_pcm_substream;
 #define SND_SOC_CLOCK_IN		0
 #define SND_SOC_CLOCK_OUT		1
 
+#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16_LE |\
+                               SNDRV_PCM_FMTBIT_S32_LE |\
+                               SNDRV_PCM_FMTBIT_S32_BE)
+
 struct snd_soc_dai_ops;
 struct snd_soc_dai;
 struct snd_ac97_bus_ops;
@@ -208,6 +194,7 @@ struct snd_soc_dai {
 	/* DAI capabilities */
 	struct snd_soc_pcm_stream capture;
 	struct snd_soc_pcm_stream playback;
+	unsigned int symmetric_rates:1;
 
 	/* DAI runtime info */
 	struct snd_pcm_runtime *runtime;
@@ -219,11 +206,8 @@ struct snd_soc_dai {
 	/* DAI private data */
 	void *private_data;
 
-	/* parent codec/platform */
-	union {
-		struct snd_soc_codec *codec;
-		struct snd_soc_platform *platform;
-	};
+	/* parent platform */
+	struct snd_soc_platform *platform;
 
 	struct list_head list;
 };
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index a7def6a9a03..ec8a45f9a06 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -140,16 +140,30 @@
 #define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
 	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
 	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
 
-/* generic register modifier widget */
+/* generic widgets */
 #define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \
 {	.id = wid, .name = wname, .kcontrols = NULL, .num_kcontrols = 0, \
 	.reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \
 	.on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
+#define SND_SOC_DAPM_SUPPLY(wname, wreg, wshift, winvert, wevent, wflags) \
+{	.id = snd_soc_dapm_supply, .name = wname, .reg = wreg,	\
+	.shift = wshift, .invert = winvert, .event = wevent, \
+	.event_flags = wflags}
 
 /* dapm kcontrol types */
 #define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \
@@ -265,8 +279,6 @@ int snd_soc_dapm_add_routes(struct snd_soc_codec *codec,
 /* dapm events */
 int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream,
 	int event);
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
-	enum snd_soc_bias_level level);
 
 /* dapm sys fs - used by the core */
 int snd_soc_dapm_sys_add(struct device *dev);
@@ -298,6 +310,7 @@ enum snd_soc_dapm_type {
 	snd_soc_dapm_vmid,			/* codec bias/vmid - to minimise pops */
 	snd_soc_dapm_pre,			/* machine specific pre widget - exec first */
 	snd_soc_dapm_post,			/* machine specific post widget - exec last */
+	snd_soc_dapm_supply,		/* power/clock supply */
 };
 
 /*
@@ -357,6 +370,8 @@ struct snd_soc_dapm_widget {
 	unsigned char suspend:1;		/* was active before suspend */
 	unsigned char pmdown:1;			/* waiting for timeout */
 
+	int (*power_check)(struct snd_soc_dapm_widget *w);
+
 	/* external events */
 	unsigned short event_flags;		/* flags to specify event types */
 	int (*event)(struct snd_soc_dapm_widget*, struct snd_kcontrol *, int);
@@ -368,6 +383,9 @@ struct snd_soc_dapm_widget {
 	/* widget input and outputs */
 	struct list_head sources;
 	struct list_head sinks;
+
+	/* used during DAPM updates */
+	struct list_head power_list;
 };
 
 #endif
diff --git a/include/sound/soc.h b/include/sound/soc.h
index a40bc6f316f..cf6111d72b1 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -118,6 +118,14 @@
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+	 xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
+		 .max = xmax, .invert = xinvert} }
 #define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -206,10 +214,6 @@ void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
 #endif
 
-/* codec IO */
-#define snd_soc_read(codec, reg) codec->read(codec, reg)
-#define snd_soc_write(codec, reg, value) codec->write(codec, reg, value)
-
 /* codec register bit access */
 int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
 				unsigned short mask, unsigned short value);
@@ -331,6 +335,7 @@ struct snd_soc_codec {
 	struct module *owner;
 	struct mutex mutex;
 	struct device *dev;
+	struct snd_soc_device *socdev;
 
 	struct list_head list;
 
@@ -364,6 +369,8 @@ struct snd_soc_codec {
 	enum snd_soc_bias_level bias_level;
 	enum snd_soc_bias_level suspend_bias_level;
 	struct delayed_work delayed_work;
+	struct list_head up_list;
+	struct list_head down_list;
 
 	/* codec DAI's */
 	struct snd_soc_dai *dai;
@@ -417,6 +424,12 @@ struct snd_soc_dai_link  {
 	/* codec/machine specific init - e.g. add machine controls */
 	int (*init)(struct snd_soc_codec *codec);
 
+	/* Symmetry requirements */
+	unsigned int symmetric_rates:1;
+
+	/* Symmetry data - only valid if symmetry is being enforced */
+	unsigned int rate;
+
 	/* DAI pcm */
 	struct snd_pcm *pcm;
 };
@@ -490,6 +503,19 @@ struct soc_enum {
 	void *dapm;
 };
 
+/* codec IO */
+static inline unsigned int snd_soc_read(struct snd_soc_codec *codec,
+					unsigned int reg)
+{
+	return codec->read(codec, reg);
+}
+
+static inline unsigned int snd_soc_write(struct snd_soc_codec *codec,
+					 unsigned int reg, unsigned int val)
+{
+	return codec->write(codec, reg, val);
+}
+
 #include <sound/soc-dai.h>
 
 #endif
diff --git a/include/sound/wm9081.h b/include/sound/wm9081.h
new file mode 100644
index 00000000000..e173ddbf6bd
--- /dev/null
+++ b/include/sound/wm9081.h
@@ -0,0 +1,25 @@
+/*
+ * linux/sound/wm9081.h -- Platform data for WM9081
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM_9081_H
+#define __LINUX_SND_WM_9081_H
+
+struct wm9081_retune_mobile_setting {
+	const char *name;
+	unsigned int rate;
+	u16 config[20];
+};
+
+struct wm9081_retune_mobile_config {
+	struct wm9081_retune_mobile_setting *configs;
+	int num_configs;
+};
+
+#endif
diff --git a/include/trace/events/napi.h b/include/trace/events/napi.h
new file mode 100644
index 00000000000..a8989c4547e
--- /dev/null
+++ b/include/trace/events/napi.h
@@ -0,0 +1,11 @@
+#ifndef _TRACE_NAPI_H_
+#define _TRACE_NAPI_H_
+
+#include <linux/netdevice.h>
+#include <linux/tracepoint.h>
+
+DECLARE_TRACE(napi_poll,
+	TP_PROTO(struct napi_struct *napi),
+	TP_ARGS(napi));
+
+#endif
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000000..b5cc72fe046
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24		0
+#define PIN_MODE_DUMB_18_SPI		1
+#define PIN_MODE_DUMB_18_GPIO		2
+#define PIN_MODE_DUMB_16_SPI		3
+#define PIN_MODE_DUMB_16_GPIO		4
+#define PIN_MODE_DUMB_12_SPI_GPIO	5
+#define PIN_MODE_SMART_18_SPI		6
+#define PIN_MODE_SMART_16_SPI		7
+#define PIN_MODE_SMART_8_SPI_GPIO	8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565		0
+#define DUMB_MODE_RGB565_UPPER		1
+#define DUMB_MODE_RGB666		2
+#define DUMB_MODE_RGB666_UPPER		3
+#define DUMB_MODE_RGB444		4
+#define DUMB_MODE_RGB444_UPPER		5
+#define DUMB_MODE_RGB888		6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE	(800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565		0
+#define PIX_FMT_BGR565		1
+#define PIX_FMT_RGB1555		2
+#define PIX_FMT_BGR1555		3
+#define PIX_FMT_RGB888PACK	4
+#define PIX_FMT_BGR888PACK	5
+#define PIX_FMT_RGB888UNPACK	6
+#define PIX_FMT_BGR888UNPACK	7
+#define PIX_FMT_RGBA888		8
+#define PIX_FMT_BGRA888		9
+#define PIX_FMT_YUV422PACK	10
+#define PIX_FMT_YVU422PACK	11
+#define PIX_FMT_YUV422PLANAR	12
+#define PIX_FMT_YVU422PLANAR	13
+#define PIX_FMT_YUV420PLANAR	14
+#define PIX_FMT_YVU420PLANAR	15
+#define PIX_FMT_PSEUDOCOLOR	20
+#define PIX_FMT_UYVY422PACK	(0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+	struct fb_info		*info;
+
+	void __iomem		*reg_base;
+	dma_addr_t		fb_start_dma;
+	u32			pseudo_palette[16];
+
+	int			pix_fmt;
+	unsigned		is_blanked:1;
+	unsigned		panel_rbswap:1;
+	unsigned		active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+	char	id[16];
+
+	int		num_modes;
+	struct fb_videomode *modes;
+
+	/*
+	 * Pix_fmt
+	 */
+	unsigned	pix_fmt;
+
+	/*
+	 * I/O pin allocation.
+	 */
+	unsigned	io_pin_allocation_mode:4;
+
+	/*
+	 * Dumb panel -- assignment of R/G/B component info to the 24
+	 * available external data lanes.
+	 */
+	unsigned	dumb_mode:4;
+	unsigned	panel_rgb_reverse_lanes:1;
+
+	/*
+	 * Dumb panel -- GPIO output data.
+	 */
+	unsigned	gpio_output_mask:8;
+	unsigned	gpio_output_data:8;
+
+	/*
+	 * Dumb panel -- configurable output signal polarity.
+	 */
+	unsigned	invert_composite_blank:1;
+	unsigned	invert_pix_val_ena:1;
+	unsigned	invert_pixclock:1;
+	unsigned	invert_vsync:1;
+	unsigned	invert_hsync:1;
+	unsigned	panel_rbswap:1;
+	unsigned	active:1;
+	unsigned	enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/init/Kconfig b/init/Kconfig
index 9b68fee8d79..fed6dc31b0d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -302,7 +302,8 @@ config AUDITSYSCALL
 
 config AUDIT_TREE
 	def_bool y
-	depends on AUDITSYSCALL && INOTIFY
+	depends on AUDITSYSCALL
+	select INOTIFY
 
 menu "RCU Subsystem"
 
@@ -808,14 +809,6 @@ config KALLSYMS_EXTRA_PASS
 	   you wait for kallsyms to be fixed.
 
 
-config STRIP_ASM_SYMS
-	bool "Strip assembler-generated symbols during link"
-	default n
-	help
-	  Strip internal assembler-generated symbols during a link (symbols
-	  that look like '.Lxxx') so they don't pollute the output of
-	  get_wchan() and suchlike.
-
 config HOTPLUG
 	bool "Support for hot-pluggable devices" if EMBEDDED
 	default y
@@ -935,6 +928,8 @@ config AIO
 
 config HAVE_PERF_COUNTERS
 	bool
+	help
+	  See tools/perf/design.txt for details.
 
 menu "Performance Counters"
 
@@ -995,6 +990,14 @@ config SLUB_DEBUG
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config STRIP_ASM_SYMS
+	bool "Strip assembler-generated symbols during link"
+	default n
+	help
+	  Strip internal assembler-generated symbols during a link (symbols
+	  that look like '.Lxxx') so they don't pollute the output of
+	  get_wchan() and suchlike.
+
 config COMPAT_BRK
 	bool "Disable heap randomization"
 	default y
diff --git a/init/main.c b/init/main.c
index 5616661eac0..f6204f712e7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -539,6 +539,11 @@ void __init __weak thread_info_cache_init(void)
  */
 static void __init mm_init(void)
 {
+	/*
+	 * page_cgroup requires countinous pages as memmap
+	 * and it's bigger than MAX_ORDER unless SPARSEMEM.
+	 */
+	page_cgroup_init_flatmem();
 	mem_init();
 	kmem_cache_init();
 	vmalloc_init();
@@ -635,6 +640,7 @@ asmlinkage void __init start_kernel(void)
 				 "enabled early\n");
 	early_boot_irqs_on();
 	local_irq_enable();
+	kmem_cache_init_late();
 
 	/*
 	 * HACK ALERT! This is early. We're enabling the console before
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 6e7351739a8..1f6396d7668 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -568,7 +568,7 @@ void audit_trim_trees(void)
 		if (err)
 			goto skip_it;
 
-		root_mnt = collect_mounts(path.mnt, path.dentry);
+		root_mnt = collect_mounts(&path);
 		path_put(&path);
 		if (!root_mnt)
 			goto skip_it;
@@ -660,7 +660,7 @@ int audit_add_tree_rule(struct audit_krule *rule)
 	err = kern_path(tree->pathname, 0, &path);
 	if (err)
 		goto Err;
-	mnt = collect_mounts(path.mnt, path.dentry);
+	mnt = collect_mounts(&path);
 	path_put(&path);
 	if (!mnt) {
 		err = -ENOMEM;
@@ -720,7 +720,7 @@ int audit_tag_tree(char *old, char *new)
 	err = kern_path(new, 0, &path);
 	if (err)
 		return err;
-	tagged = collect_mounts(path.mnt, path.dentry);
+	tagged = collect_mounts(&path);
 	path_put(&path);
 	if (!tagged)
 		return -ENOMEM;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index a7267bfd376..3fb789f6df9 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -46,6 +46,7 @@
 #include <linux/cgroupstats.h>
 #include <linux/hash.h>
 #include <linux/namei.h>
+#include <linux/smp_lock.h>
 
 #include <asm/atomic.h>
 
@@ -900,6 +901,7 @@ static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 	struct cgroup *cgrp = &root->top_cgroup;
 	struct cgroup_sb_opts opts;
 
+	lock_kernel();
 	mutex_lock(&cgrp->dentry->d_inode->i_mutex);
 	mutex_lock(&cgroup_mutex);
 
@@ -927,6 +929,7 @@ static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 	kfree(opts.release_agent);
 	mutex_unlock(&cgroup_mutex);
 	mutex_unlock(&cgrp->dentry->d_inode->i_mutex);
+	unlock_kernel();
 	return ret;
 }
 
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index cb8a15c1958..b675a67c9ac 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -43,6 +43,8 @@
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/debugobjects.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
 
 #include <asm/uaccess.h>
 
@@ -193,12 +195,24 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
  * Switch the timer base to the current CPU when possible.
  */
 static inline struct hrtimer_clock_base *
-switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base)
+switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
+		    int pinned)
 {
 	struct hrtimer_clock_base *new_base;
 	struct hrtimer_cpu_base *new_cpu_base;
+	int cpu, preferred_cpu = -1;
+
+	cpu = smp_processor_id();
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
+		preferred_cpu = get_nohz_load_balancer();
+		if (preferred_cpu >= 0)
+			cpu = preferred_cpu;
+	}
+#endif
 
-	new_cpu_base = &__get_cpu_var(hrtimer_bases);
+again:
+	new_cpu_base = &per_cpu(hrtimer_bases, cpu);
 	new_base = &new_cpu_base->clock_base[base->index];
 
 	if (base != new_base) {
@@ -218,6 +232,40 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base)
 		timer->base = NULL;
 		spin_unlock(&base->cpu_base->lock);
 		spin_lock(&new_base->cpu_base->lock);
+
+		/* Optimized away for NOHZ=n SMP=n */
+		if (cpu == preferred_cpu) {
+			/* Calculate clock monotonic expiry time */
+#ifdef CONFIG_HIGH_RES_TIMERS
+			ktime_t expires = ktime_sub(hrtimer_get_expires(timer),
+							new_base->offset);
+#else
+			ktime_t expires = hrtimer_get_expires(timer);
+#endif
+
+			/*
+			 * Get the next event on target cpu from the
+			 * clock events layer.
+			 * This covers the highres=off nohz=on case as well.
+			 */
+			ktime_t next = clockevents_get_next_event(cpu);
+
+			ktime_t delta = ktime_sub(expires, next);
+
+			/*
+			 * We do not migrate the timer when it is expiring
+			 * before the next event on the target cpu because
+			 * we cannot reprogram the target cpu hardware and
+			 * we would cause it to fire late.
+			 */
+			if (delta.tv64 < 0) {
+				cpu = smp_processor_id();
+				spin_unlock(&new_base->cpu_base->lock);
+				spin_lock(&base->cpu_base->lock);
+				timer->base = base;
+				goto again;
+			}
+		}
 		timer->base = new_base;
 	}
 	return new_base;
@@ -235,7 +283,7 @@ lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
 	return base;
 }
 
-# define switch_hrtimer_base(t, b)	(b)
+# define switch_hrtimer_base(t, b, p)	(b)
 
 #endif	/* !CONFIG_SMP */
 
@@ -907,9 +955,9 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
 	ret = remove_hrtimer(timer, base);
 
 	/* Switch the timer base, if necessary: */
-	new_base = switch_hrtimer_base(timer, base);
+	new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
 
-	if (mode == HRTIMER_MODE_REL) {
+	if (mode & HRTIMER_MODE_REL) {
 		tim = ktime_add_safe(tim, new_base->get_time());
 		/*
 		 * CONFIG_TIME_LOW_RES is a temporary way for architectures
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 10457854123..065205bdd92 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -45,7 +45,7 @@ void handle_bad_irq(unsigned int irq, struct irq_desc *desc)
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 static void __init init_irq_default_affinity(void)
 {
-	alloc_bootmem_cpumask_var(&irq_default_affinity);
+	alloc_cpumask_var(&irq_default_affinity, GFP_NOWAIT);
 	cpumask_setall(irq_default_affinity);
 }
 #else
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 374faf9bfdc..3a29dbe7898 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -30,12 +30,16 @@
 #define all_var 0
 #endif
 
-/* These will be re-linked against their real values during the second link stage */
+/*
+ * These will be re-linked against their real values
+ * during the second link stage.
+ */
 extern const unsigned long kallsyms_addresses[] __attribute__((weak));
 extern const u8 kallsyms_names[] __attribute__((weak));
 
-/* tell the compiler that the count isn't in the small data section if the arch
- * has one (eg: FRV)
+/*
+ * Tell the compiler that the count isn't in the small data section if the arch
+ * has one (eg: FRV).
  */
 extern const unsigned long kallsyms_num_syms
 __attribute__((weak, section(".rodata")));
@@ -75,31 +79,37 @@ static int is_ksym_addr(unsigned long addr)
 	return is_kernel_text(addr) || is_kernel_inittext(addr);
 }
 
-/* expand a compressed symbol data into the resulting uncompressed string,
-   given the offset to where the symbol is in the compressed stream */
+/*
+ * Expand a compressed symbol data into the resulting uncompressed string,
+ * given the offset to where the symbol is in the compressed stream.
+ */
 static unsigned int kallsyms_expand_symbol(unsigned int off, char *result)
 {
 	int len, skipped_first = 0;
 	const u8 *tptr, *data;
 
-	/* get the compressed symbol length from the first symbol byte */
+	/* Get the compressed symbol length from the first symbol byte. */
 	data = &kallsyms_names[off];
 	len = *data;
 	data++;
 
-	/* update the offset to return the offset for the next symbol on
-	 * the compressed stream */
+	/*
+	 * Update the offset to return the offset for the next symbol on
+	 * the compressed stream.
+	 */
 	off += len + 1;
 
-	/* for every byte on the compressed symbol data, copy the table
-	   entry for that byte */
-	while(len) {
-		tptr = &kallsyms_token_table[ kallsyms_token_index[*data] ];
+	/*
+	 * For every byte on the compressed symbol data, copy the table
+	 * entry for that byte.
+	 */
+	while (len) {
+		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
 		data++;
 		len--;
 
 		while (*tptr) {
-			if(skipped_first) {
+			if (skipped_first) {
 				*result = *tptr;
 				result++;
 			} else
@@ -110,36 +120,46 @@ static unsigned int kallsyms_expand_symbol(unsigned int off, char *result)
 
 	*result = '\0';
 
-	/* return to offset to the next symbol */
+	/* Return to offset to the next symbol. */
 	return off;
 }
 
-/* get symbol type information. This is encoded as a single char at the
- * begining of the symbol name */
+/*
+ * Get symbol type information. This is encoded as a single char at the
+ * beginning of the symbol name.
+ */
 static char kallsyms_get_symbol_type(unsigned int off)
 {
-	/* get just the first code, look it up in the token table, and return the
-	 * first char from this token */
-	return kallsyms_token_table[ kallsyms_token_index[ kallsyms_names[off+1] ] ];
+	/*
+	 * Get just the first code, look it up in the token table,
+	 * and return the first char from this token.
+	 */
+	return kallsyms_token_table[kallsyms_token_index[kallsyms_names[off + 1]]];
 }
 
 
-/* find the offset on the compressed stream given and index in the
- * kallsyms array */
+/*
+ * Find the offset on the compressed stream given and index in the
+ * kallsyms array.
+ */
 static unsigned int get_symbol_offset(unsigned long pos)
 {
 	const u8 *name;
 	int i;
 
-	/* use the closest marker we have. We have markers every 256 positions,
-	 * so that should be close enough */
-	name = &kallsyms_names[ kallsyms_markers[pos>>8] ];
+	/*
+	 * Use the closest marker we have. We have markers every 256 positions,
+	 * so that should be close enough.
+	 */
+	name = &kallsyms_names[kallsyms_markers[pos >> 8]];
 
-	/* sequentially scan all the symbols up to the point we're searching for.
-	 * Every symbol is stored in a [<len>][<len> bytes of data] format, so we
-	 * just need to add the len to the current pointer for every symbol we
-	 * wish to skip */
-	for(i = 0; i < (pos&0xFF); i++)
+	/*
+	 * Sequentially scan all the symbols up to the point we're searching
+	 * for. Every symbol is stored in a [<len>][<len> bytes of data] format,
+	 * so we just need to add the len to the current pointer for every
+	 * symbol we wish to skip.
+	 */
+	for (i = 0; i < (pos & 0xFF); i++)
 		name = name + (*name) + 1;
 
 	return name - kallsyms_names;
@@ -190,7 +210,7 @@ static unsigned long get_symbol_pos(unsigned long addr,
 	/* This kernel should never had been booted. */
 	BUG_ON(!kallsyms_addresses);
 
-	/* do a binary search on the sorted kallsyms_addresses array */
+	/* Do a binary search on the sorted kallsyms_addresses array. */
 	low = 0;
 	high = kallsyms_num_syms;
 
@@ -203,15 +223,15 @@ static unsigned long get_symbol_pos(unsigned long addr,
 	}
 
 	/*
-	 * search for the first aliased symbol. Aliased
-	 * symbols are symbols with the same address
+	 * Search for the first aliased symbol. Aliased
+	 * symbols are symbols with the same address.
 	 */
 	while (low && kallsyms_addresses[low-1] == kallsyms_addresses[low])
 		--low;
 
 	symbol_start = kallsyms_addresses[low];
 
-	/* Search for next non-aliased symbol */
+	/* Search for next non-aliased symbol. */
 	for (i = low + 1; i < kallsyms_num_syms; i++) {
 		if (kallsyms_addresses[i] > symbol_start) {
 			symbol_end = kallsyms_addresses[i];
@@ -219,7 +239,7 @@ static unsigned long get_symbol_pos(unsigned long addr,
 		}
 	}
 
-	/* if we found no next symbol, we use the end of the section */
+	/* If we found no next symbol, we use the end of the section. */
 	if (!symbol_end) {
 		if (is_kernel_inittext(addr))
 			symbol_end = (unsigned long)_einittext;
@@ -252,10 +272,10 @@ int kallsyms_lookup_size_offset(unsigned long addr, unsigned long *symbolsize,
 
 /*
  * Lookup an address
- * - modname is set to NULL if it's in the kernel
- * - we guarantee that the returned name is valid until we reschedule even if
- *   it resides in a module
- * - we also guarantee that modname will be valid until rescheduled
+ * - modname is set to NULL if it's in the kernel.
+ * - We guarantee that the returned name is valid until we reschedule even if.
+ *   It resides in a module.
+ * - We also guarantee that modname will be valid until rescheduled.
  */
 const char *kallsyms_lookup(unsigned long addr,
 			    unsigned long *symbolsize,
@@ -276,7 +296,7 @@ const char *kallsyms_lookup(unsigned long addr,
 		return namebuf;
 	}
 
-	/* see if it's in a module */
+	/* See if it's in a module. */
 	return module_address_lookup(addr, symbolsize, offset, modname,
 				     namebuf);
 }
@@ -294,7 +314,7 @@ int lookup_symbol_name(unsigned long addr, char *symname)
 		kallsyms_expand_symbol(get_symbol_offset(pos), symname);
 		return 0;
 	}
-	/* see if it's in a module */
+	/* See if it's in a module. */
 	return lookup_module_symbol_name(addr, symname);
 }
 
@@ -313,7 +333,7 @@ int lookup_symbol_attrs(unsigned long addr, unsigned long *size,
 		modname[0] = '\0';
 		return 0;
 	}
-	/* see if it's in a module */
+	/* See if it's in a module. */
 	return lookup_module_symbol_attrs(addr, size, offset, modname, name);
 }
 
@@ -342,6 +362,7 @@ int sprint_symbol(char *buffer, unsigned long address)
 
 	return len;
 }
+EXPORT_SYMBOL_GPL(sprint_symbol);
 
 /* Look up a kernel symbol and print it to the kernel messages. */
 void __print_symbol(const char *fmt, unsigned long address)
@@ -352,13 +373,13 @@ void __print_symbol(const char *fmt, unsigned long address)
 
 	printk(fmt, buffer);
 }
+EXPORT_SYMBOL(__print_symbol);
 
 /* To avoid using get_symbol_offset for every symbol, we carry prefix along. */
-struct kallsym_iter
-{
+struct kallsym_iter {
 	loff_t pos;
 	unsigned long value;
-	unsigned int nameoff; /* If iterating in core kernel symbols */
+	unsigned int nameoff; /* If iterating in core kernel symbols. */
 	char type;
 	char name[KSYM_NAME_LEN];
 	char module_name[MODULE_NAME_LEN];
@@ -404,7 +425,7 @@ static int update_iter(struct kallsym_iter *iter, loff_t pos)
 		iter->pos = pos;
 		return get_ksymbol_mod(iter);
 	}
-	
+
 	/* If we're not on the desired position, reset to new position. */
 	if (pos != iter->pos)
 		reset_iter(iter, pos);
@@ -439,23 +460,25 @@ static int s_show(struct seq_file *m, void *p)
 {
 	struct kallsym_iter *iter = m->private;
 
-	/* Some debugging symbols have no name.  Ignore them. */ 
+	/* Some debugging symbols have no name.  Ignore them. */
 	if (!iter->name[0])
 		return 0;
 
 	if (iter->module_name[0]) {
 		char type;
 
-		/* Label it "global" if it is exported,
-		 * "local" if not exported. */
+		/*
+		 * Label it "global" if it is exported,
+		 * "local" if not exported.
+		 */
 		type = iter->exported ? toupper(iter->type) :
 					tolower(iter->type);
 		seq_printf(m, "%0*lx %c %s\t[%s]\n",
-			   (int)(2*sizeof(void*)),
+			   (int)(2 * sizeof(void *)),
 			   iter->value, type, iter->name, iter->module_name);
 	} else
 		seq_printf(m, "%0*lx %c %s\n",
-			   (int)(2*sizeof(void*)),
+			   (int)(2 * sizeof(void *)),
 			   iter->value, iter->type, iter->name);
 	return 0;
 }
@@ -469,9 +492,11 @@ static const struct seq_operations kallsyms_op = {
 
 static int kallsyms_open(struct inode *inode, struct file *file)
 {
-	/* We keep iterator in m->private, since normal case is to
+	/*
+	 * We keep iterator in m->private, since normal case is to
 	 * s_start from where we left off, so we avoid doing
-	 * using get_symbol_offset for every symbol */
+	 * using get_symbol_offset for every symbol.
+	 */
 	struct kallsym_iter *iter;
 	int ret;
 
@@ -500,7 +525,4 @@ static int __init kallsyms_init(void)
 	proc_create("kallsyms", 0444, NULL, &kallsyms_operations);
 	return 0;
 }
-__initcall(kallsyms_init);
-
-EXPORT_SYMBOL(__print_symbol);
-EXPORT_SYMBOL_GPL(sprint_symbol);
+device_initcall(kallsyms_init);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index e4983770913..ae1c35201cc 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1448,17 +1448,17 @@ int kernel_kexec(void)
 			goto Restore_console;
 		}
 		suspend_console();
-		error = device_suspend(PMSG_FREEZE);
+		error = dpm_suspend_start(PMSG_FREEZE);
 		if (error)
 			goto Resume_console;
-		/* At this point, device_suspend() has been called,
-		 * but *not* device_power_down(). We *must*
-		 * device_power_down() now.  Otherwise, drivers for
+		/* At this point, dpm_suspend_start() has been called,
+		 * but *not* dpm_suspend_noirq(). We *must* call
+		 * dpm_suspend_noirq() now.  Otherwise, drivers for
 		 * some devices (e.g. interrupt controllers) become
 		 * desynchronized with the actual state of the
 		 * hardware at resume time, and evil weirdness ensues.
 		 */
-		error = device_power_down(PMSG_FREEZE);
+		error = dpm_suspend_noirq(PMSG_FREEZE);
 		if (error)
 			goto Resume_devices;
 		error = disable_nonboot_cpus();
@@ -1486,9 +1486,9 @@ int kernel_kexec(void)
 		local_irq_enable();
  Enable_cpus:
 		enable_nonboot_cpus();
-		device_power_up(PMSG_RESTORE);
+		dpm_resume_noirq(PMSG_RESTORE);
  Resume_devices:
-		device_resume(PMSG_RESTORE);
+		dpm_resume_end(PMSG_RESTORE);
  Resume_console:
 		resume_console();
 		thaw_processes();
diff --git a/kernel/module.c b/kernel/module.c
index 35f7de00bf0..215aaab09e9 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2455,6 +2455,7 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	mutex_lock(&module_mutex);
 	/* Drop initial reference. */
 	module_put(mod);
+	trim_init_extable(mod);
 	module_free(mod, mod->module_init);
 	mod->module_init = NULL;
 	mod->init_size = 0;
@@ -2898,7 +2899,7 @@ void print_modules(void)
 	struct module *mod;
 	char buf[8];
 
-	printk("Modules linked in:");
+	printk(KERN_DEFAULT "Modules linked in:");
 	/* Most callers should already have preempt disabled, but make sure */
 	preempt_disable();
 	list_for_each_entry_rcu(mod, &modules, list)
diff --git a/kernel/params.c b/kernel/params.c
index de273ec85bd..7f6912ced2b 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -24,9 +24,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-/* We abuse the high bits of "perm" to record whether we kmalloc'ed. */
-#define KPARAM_KMALLOCED	0x80000000
-
 #if 0
 #define DEBUGP printk
 #else
@@ -220,13 +217,13 @@ int param_set_charp(const char *val, struct kernel_param *kp)
 		return -ENOSPC;
 	}
 
-	if (kp->perm & KPARAM_KMALLOCED)
+	if (kp->flags & KPARAM_KMALLOCED)
 		kfree(*(char **)kp->arg);
 
 	/* This is a hack.  We can't need to strdup in early boot, and we
 	 * don't need to; this mangled commandline is preserved. */
 	if (slab_is_available()) {
-		kp->perm |= KPARAM_KMALLOCED;
+		kp->flags |= KPARAM_KMALLOCED;
 		*(char **)kp->arg = kstrdup(val, GFP_KERNEL);
 		if (!kp->arg)
 			return -ENOMEM;
@@ -241,44 +238,63 @@ int param_get_charp(char *buffer, struct kernel_param *kp)
 	return sprintf(buffer, "%s", *((char **)kp->arg));
 }
 
+/* Actually could be a bool or an int, for historical reasons. */
 int param_set_bool(const char *val, struct kernel_param *kp)
 {
+	bool v;
+
 	/* No equals means "set"... */
 	if (!val) val = "1";
 
 	/* One of =[yYnN01] */
 	switch (val[0]) {
 	case 'y': case 'Y': case '1':
-		*(int *)kp->arg = 1;
-		return 0;
+		v = true;
+		break;
 	case 'n': case 'N': case '0':
-		*(int *)kp->arg = 0;
-		return 0;
+		v = false;
+		break;
+	default:
+		return -EINVAL;
 	}
-	return -EINVAL;
+
+	if (kp->flags & KPARAM_ISBOOL)
+		*(bool *)kp->arg = v;
+	else
+		*(int *)kp->arg = v;
+	return 0;
 }
 
 int param_get_bool(char *buffer, struct kernel_param *kp)
 {
+	bool val;
+	if (kp->flags & KPARAM_ISBOOL)
+		val = *(bool *)kp->arg;
+	else
+		val = *(int *)kp->arg;
+
 	/* Y and N chosen as being relatively non-coder friendly */
-	return sprintf(buffer, "%c", (*(int *)kp->arg) ? 'Y' : 'N');
+	return sprintf(buffer, "%c", val ? 'Y' : 'N');
 }
 
+/* This one must be bool. */
 int param_set_invbool(const char *val, struct kernel_param *kp)
 {
-	int boolval, ret;
+	int ret;
+	bool boolval;
 	struct kernel_param dummy;
 
 	dummy.arg = &boolval;
+	dummy.flags = KPARAM_ISBOOL;
 	ret = param_set_bool(val, &dummy);
 	if (ret == 0)
-		*(int *)kp->arg = !boolval;
+		*(bool *)kp->arg = !boolval;
 	return ret;
 }
 
 int param_get_invbool(char *buffer, struct kernel_param *kp)
 {
-	return sprintf(buffer, "%c", (*(int *)kp->arg) ? 'N' : 'Y');
+	return sprintf(buffer, "%c", (*(bool *)kp->arg) ? 'N' : 'Y');
 }
 
 /* We break the rule and mangle the string. */
@@ -591,7 +607,7 @@ void destroy_params(const struct kernel_param *params, unsigned num)
 	unsigned int i;
 
 	for (i = 0; i < num; i++)
-		if (params[i].perm & KPARAM_KMALLOCED)
+		if (params[i].flags & KPARAM_KMALLOCED)
 			kfree(*(char **)params[i].arg);
 }
 
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index ef5d8a5b245..29b685f551a 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -3570,12 +3570,8 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
 		goto done;
 
-	if (attr->type == PERF_TYPE_RAW) {
-		pmu = hw_perf_counter_init(counter);
-		goto done;
-	}
-
 	switch (attr->type) {
+	case PERF_TYPE_RAW:
 	case PERF_TYPE_HARDWARE:
 	case PERF_TYPE_HW_CACHE:
 		pmu = hw_perf_counter_init(counter);
@@ -3588,6 +3584,9 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	case PERF_TYPE_TRACEPOINT:
 		pmu = tp_perf_counter_init(counter);
 		break;
+
+	default:
+		break;
 	}
 done:
 	err = 0;
@@ -3614,6 +3613,85 @@ done:
 	return counter;
 }
 
+static int perf_copy_attr(struct perf_counter_attr __user *uattr,
+			  struct perf_counter_attr *attr)
+{
+	int ret;
+	u32 size;
+
+	if (!access_ok(VERIFY_WRITE, uattr, PERF_ATTR_SIZE_VER0))
+		return -EFAULT;
+
+	/*
+	 * zero the full structure, so that a short copy will be nice.
+	 */
+	memset(attr, 0, sizeof(*attr));
+
+	ret = get_user(size, &uattr->size);
+	if (ret)
+		return ret;
+
+	if (size > PAGE_SIZE)	/* silly large */
+		goto err_size;
+
+	if (!size)		/* abi compat */
+		size = PERF_ATTR_SIZE_VER0;
+
+	if (size < PERF_ATTR_SIZE_VER0)
+		goto err_size;
+
+	/*
+	 * If we're handed a bigger struct than we know of,
+	 * ensure all the unknown bits are 0.
+	 */
+	if (size > sizeof(*attr)) {
+		unsigned long val;
+		unsigned long __user *addr;
+		unsigned long __user *end;
+
+		addr = PTR_ALIGN((void __user *)uattr + sizeof(*attr),
+				sizeof(unsigned long));
+		end  = PTR_ALIGN((void __user *)uattr + size,
+				sizeof(unsigned long));
+
+		for (; addr < end; addr += sizeof(unsigned long)) {
+			ret = get_user(val, addr);
+			if (ret)
+				return ret;
+			if (val)
+				goto err_size;
+		}
+	}
+
+	ret = copy_from_user(attr, uattr, size);
+	if (ret)
+		return -EFAULT;
+
+	/*
+	 * If the type exists, the corresponding creation will verify
+	 * the attr->config.
+	 */
+	if (attr->type >= PERF_TYPE_MAX)
+		return -EINVAL;
+
+	if (attr->__reserved_1 || attr->__reserved_2 || attr->__reserved_3)
+		return -EINVAL;
+
+	if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
+		return -EINVAL;
+
+	if (attr->read_format & ~(PERF_FORMAT_MAX-1))
+		return -EINVAL;
+
+out:
+	return ret;
+
+err_size:
+	put_user(sizeof(*attr), &uattr->size);
+	ret = -E2BIG;
+	goto out;
+}
+
 /**
  * sys_perf_counter_open - open a performance counter, associate it to a task/cpu
  *
@@ -3623,7 +3701,7 @@ done:
  * @group_fd:		group leader counter fd
  */
 SYSCALL_DEFINE5(perf_counter_open,
-		const struct perf_counter_attr __user *, attr_uptr,
+		struct perf_counter_attr __user *, attr_uptr,
 		pid_t, pid, int, cpu, int, group_fd, unsigned long, flags)
 {
 	struct perf_counter *counter, *group_leader;
@@ -3639,8 +3717,9 @@ SYSCALL_DEFINE5(perf_counter_open,
 	if (flags)
 		return -EINVAL;
 
-	if (copy_from_user(&attr, attr_uptr, sizeof(attr)) != 0)
-		return -EFAULT;
+	ret = perf_copy_attr(attr_uptr, &attr);
+	if (ret)
+		return ret;
 
 	if (!attr.exclude_kernel) {
 		if (perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN))
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 23bd4daeb96..72067cbdb37 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -116,9 +116,13 @@ config SUSPEND_FREEZER
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
+config HIBERNATION_NVS
+	bool
+
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
+	select HIBERNATION_NVS if HAS_IOMEM
 	---help---
 	  Enable the suspend to disk (STD) functionality, which is usually
 	  called "hibernation" in user interfaces.  STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 720ea4f781b..c3b81c30e5d 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -6,6 +6,9 @@ endif
 obj-$(CONFIG_PM)		+= main.o
 obj-$(CONFIG_PM_SLEEP)		+= console.o
 obj-$(CONFIG_FREEZER)		+= process.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o disk.o snapshot.o swap.o user.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o
+obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o hibernate.o snapshot.o swap.o user.o
+obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/disk.c b/kernel/power/hibernate.c
index 5cb080e7eeb..81d2e746489 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/hibernate.c
@@ -1,12 +1,12 @@
 /*
- * kernel/power/disk.c - Suspend-to-disk support.
+ * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
  *
  * Copyright (c) 2003 Patrick Mochel
  * Copyright (c) 2003 Open Source Development Lab
  * Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
  *
  * This file is released under the GPLv2.
- *
  */
 
 #include <linux/suspend.h>
@@ -215,13 +215,13 @@ static int create_image(int platform_mode)
 	if (error)
 		return error;
 
-	/* At this point, device_suspend() has been called, but *not*
-	 * device_power_down(). We *must* call device_power_down() now.
+	/* At this point, dpm_suspend_start() has been called, but *not*
+	 * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
 	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
 	 * become desynchronized with the actual state of the hardware
 	 * at resume time, and evil weirdness ensues.
 	 */
-	error = device_power_down(PMSG_FREEZE);
+	error = dpm_suspend_noirq(PMSG_FREEZE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting hibernation\n");
@@ -262,7 +262,7 @@ static int create_image(int platform_mode)
 
  Power_up:
 	sysdev_resume();
-	/* NOTE:  device_power_up() is just a resume() for devices
+	/* NOTE:  dpm_resume_noirq() is just a resume() for devices
 	 * that suspended with irqs off ... no overall powerup.
 	 */
 
@@ -275,7 +275,7 @@ static int create_image(int platform_mode)
  Platform_finish:
 	platform_finish(platform_mode);
 
-	device_power_up(in_suspend ?
+	dpm_resume_noirq(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 
 	return error;
@@ -304,7 +304,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
-	error = device_suspend(PMSG_FREEZE);
+	error = dpm_suspend_start(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
 
@@ -315,7 +315,7 @@ int hibernation_snapshot(int platform_mode)
 	/* Control returns here after successful restore */
 
  Resume_devices:
-	device_resume(in_suspend ?
+	dpm_resume_end(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 	resume_console();
  Close:
@@ -339,7 +339,7 @@ static int resume_target_kernel(bool platform_mode)
 {
 	int error;
 
-	error = device_power_down(PMSG_QUIESCE);
+	error = dpm_suspend_noirq(PMSG_QUIESCE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting resume\n");
@@ -394,7 +394,7 @@ static int resume_target_kernel(bool platform_mode)
  Cleanup:
 	platform_restore_cleanup(platform_mode);
 
-	device_power_up(PMSG_RECOVER);
+	dpm_resume_noirq(PMSG_RECOVER);
 
 	return error;
 }
@@ -414,10 +414,10 @@ int hibernation_restore(int platform_mode)
 
 	pm_prepare_console();
 	suspend_console();
-	error = device_suspend(PMSG_QUIESCE);
+	error = dpm_suspend_start(PMSG_QUIESCE);
 	if (!error) {
 		error = resume_target_kernel(platform_mode);
-		device_resume(PMSG_RECOVER);
+		dpm_resume_end(PMSG_RECOVER);
 	}
 	resume_console();
 	pm_restore_console();
@@ -447,14 +447,14 @@ int hibernation_platform_enter(void)
 
 	entering_platform_hibernation = true;
 	suspend_console();
-	error = device_suspend(PMSG_HIBERNATE);
+	error = dpm_suspend_start(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
 			hibernation_ops->recover();
 		goto Resume_devices;
 	}
 
-	error = device_power_down(PMSG_HIBERNATE);
+	error = dpm_suspend_noirq(PMSG_HIBERNATE);
 	if (error)
 		goto Resume_devices;
 
@@ -479,11 +479,11 @@ int hibernation_platform_enter(void)
  Platofrm_finish:
 	hibernation_ops->finish();
 
-	device_power_up(PMSG_RESTORE);
+	dpm_suspend_noirq(PMSG_RESTORE);
 
  Resume_devices:
 	entering_platform_hibernation = false;
-	device_resume(PMSG_RESTORE);
+	dpm_resume_end(PMSG_RESTORE);
 	resume_console();
 
  Close:
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/hibernate_nvs.c
new file mode 100644
index 00000000000..39ac698ef83
--- /dev/null
+++ b/kernel/power/hibernate_nvs.c
@@ -0,0 +1,135 @@
+/*
+ * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory
+ *
+ * Copyright (C) 2008,2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/suspend.h>
+
+/*
+ * Platforms, like ACPI, may want us to save some memory used by them during
+ * hibernation and to restore the contents of this memory during the subsequent
+ * resume.  The code below implements a mechanism allowing us to do that.
+ */
+
+struct nvs_page {
+	unsigned long phys_start;
+	unsigned int size;
+	void *kaddr;
+	void *data;
+	struct list_head node;
+};
+
+static LIST_HEAD(nvs_list);
+
+/**
+ *	hibernate_nvs_register - register platform NVS memory region to save
+ *	@start - physical address of the region
+ *	@size - size of the region
+ *
+ *	The NVS region need not be page-aligned (both ends) and we arrange
+ *	things so that the data from page-aligned addresses in this region will
+ *	be copied into separate RAM pages.
+ */
+int hibernate_nvs_register(unsigned long start, unsigned long size)
+{
+	struct nvs_page *entry, *next;
+
+	while (size > 0) {
+		unsigned int nr_bytes;
+
+		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
+		if (!entry)
+			goto Error;
+
+		list_add_tail(&entry->node, &nvs_list);
+		entry->phys_start = start;
+		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
+		entry->size = (size < nr_bytes) ? size : nr_bytes;
+
+		start += entry->size;
+		size -= entry->size;
+	}
+	return 0;
+
+ Error:
+	list_for_each_entry_safe(entry, next, &nvs_list, node) {
+		list_del(&entry->node);
+		kfree(entry);
+	}
+	return -ENOMEM;
+}
+
+/**
+ *	hibernate_nvs_free - free data pages allocated for saving NVS regions
+ */
+void hibernate_nvs_free(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			free_page((unsigned long)entry->data);
+			entry->data = NULL;
+			if (entry->kaddr) {
+				iounmap(entry->kaddr);
+				entry->kaddr = NULL;
+			}
+		}
+}
+
+/**
+ *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ */
+int hibernate_nvs_alloc(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node) {
+		entry->data = (void *)__get_free_page(GFP_KERNEL);
+		if (!entry->data) {
+			hibernate_nvs_free();
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	hibernate_nvs_save - save NVS memory regions
+ */
+void hibernate_nvs_save(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Saving platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			entry->kaddr = ioremap(entry->phys_start, entry->size);
+			memcpy(entry->data, entry->kaddr, entry->size);
+		}
+}
+
+/**
+ *	hibernate_nvs_restore - restore NVS memory regions
+ *
+ *	This function is going to be called with interrupts disabled, so it
+ *	cannot iounmap the virtual addresses used to access the NVS region.
+ */
+void hibernate_nvs_restore(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data)
+			memcpy(entry->kaddr, entry->data, entry->size);
+}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 868028280d1..f710e36930c 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -8,20 +8,9 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/suspend.h>
 #include <linux/kobject.h>
 #include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/cpu.h>
 #include <linux/resume-trace.h>
-#include <linux/freezer.h>
-#include <linux/vmstat.h>
-#include <linux/syscalls.h>
 
 #include "power.h"
 
@@ -119,373 +108,6 @@ power_attr(pm_test);
 
 #endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_SUSPEND
-
-static int suspend_test(int level)
-{
-#ifdef CONFIG_PM_DEBUG
-	if (pm_test_level == level) {
-		printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
-		mdelay(5000);
-		return 1;
-	}
-#endif /* !CONFIG_PM_DEBUG */
-	return 0;
-}
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-/*
- * We test the system suspend code by setting an RTC wakealarm a short
- * time in the future, then suspending.  Suspending the devices won't
- * normally take long ... some systems only need a few milliseconds.
- *
- * The time it takes is system-specific though, so when we test this
- * during system bootup we allow a LOT of time.
- */
-#define TEST_SUSPEND_SECONDS	5
-
-static unsigned long suspend_test_start_time;
-
-static void suspend_test_start(void)
-{
-	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
-	 * What we want is a hardware counter that will work correctly even
-	 * during the irqs-are-off stages of the suspend/resume cycle...
-	 */
-	suspend_test_start_time = jiffies;
-}
-
-static void suspend_test_finish(const char *label)
-{
-	long nj = jiffies - suspend_test_start_time;
-	unsigned msec;
-
-	msec = jiffies_to_msecs(abs(nj));
-	pr_info("PM: %s took %d.%03d seconds\n", label,
-			msec / 1000, msec % 1000);
-
-	/* Warning on suspend means the RTC alarm period needs to be
-	 * larger -- the system was sooo slooowwww to suspend that the
-	 * alarm (should have) fired before the system went to sleep!
-	 *
-	 * Warning on either suspend or resume also means the system
-	 * has some performance issues.  The stack dump of a WARN_ON
-	 * is more likely to get the right attention than a printk...
-	 */
-	WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
-}
-
-#else
-
-static void suspend_test_start(void)
-{
-}
-
-static void suspend_test_finish(const char *label)
-{
-}
-
-#endif
-
-/* This is just an arbitrary number */
-#define FREE_PAGE_NUMBER (100)
-
-static struct platform_suspend_ops *suspend_ops;
-
-/**
- *	suspend_set_ops - Set the global suspend method table.
- *	@ops:	Pointer to ops structure.
- */
-
-void suspend_set_ops(struct platform_suspend_ops *ops)
-{
-	mutex_lock(&pm_mutex);
-	suspend_ops = ops;
-	mutex_unlock(&pm_mutex);
-}
-
-/**
- * suspend_valid_only_mem - generic memory-only valid callback
- *
- * Platform drivers that implement mem suspend only and only need
- * to check for that in their .valid callback can use this instead
- * of rolling their own .valid callback.
- */
-int suspend_valid_only_mem(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM;
-}
-
-/**
- *	suspend_prepare - Do prep work before entering low-power state.
- *
- *	This is common code that is called for each state that we're entering.
- *	Run suspend notifiers, allocate a console and stop all processes.
- */
-static int suspend_prepare(void)
-{
-	int error;
-	unsigned int free_pages;
-
-	if (!suspend_ops || !suspend_ops->enter)
-		return -EPERM;
-
-	pm_prepare_console();
-
-	error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
-	if (error)
-		goto Finish;
-
-	error = usermodehelper_disable();
-	if (error)
-		goto Finish;
-
-	if (suspend_freeze_processes()) {
-		error = -EAGAIN;
-		goto Thaw;
-	}
-
-	free_pages = global_page_state(NR_FREE_PAGES);
-	if (free_pages < FREE_PAGE_NUMBER) {
-		pr_debug("PM: free some memory\n");
-		shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
-		if (nr_free_pages() < FREE_PAGE_NUMBER) {
-			error = -ENOMEM;
-			printk(KERN_ERR "PM: No enough memory\n");
-		}
-	}
-	if (!error)
-		return 0;
-
- Thaw:
-	suspend_thaw_processes();
-	usermodehelper_enable();
- Finish:
-	pm_notifier_call_chain(PM_POST_SUSPEND);
-	pm_restore_console();
-	return error;
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
-{
-	local_irq_disable();
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
-{
-	local_irq_enable();
-}
-
-/**
- *	suspend_enter - enter the desired system sleep state.
- *	@state:		state to enter
- *
- *	This function should be called after devices have been suspended.
- */
-static int suspend_enter(suspend_state_t state)
-{
-	int error;
-
-	if (suspend_ops->prepare) {
-		error = suspend_ops->prepare();
-		if (error)
-			return error;
-	}
-
-	error = device_power_down(PMSG_SUSPEND);
-	if (error) {
-		printk(KERN_ERR "PM: Some devices failed to power down\n");
-		goto Platfrom_finish;
-	}
-
-	if (suspend_ops->prepare_late) {
-		error = suspend_ops->prepare_late();
-		if (error)
-			goto Power_up_devices;
-	}
-
-	if (suspend_test(TEST_PLATFORM))
-		goto Platform_wake;
-
-	error = disable_nonboot_cpus();
-	if (error || suspend_test(TEST_CPUS))
-		goto Enable_cpus;
-
-	arch_suspend_disable_irqs();
-	BUG_ON(!irqs_disabled());
-
-	error = sysdev_suspend(PMSG_SUSPEND);
-	if (!error) {
-		if (!suspend_test(TEST_CORE))
-			error = suspend_ops->enter(state);
-		sysdev_resume();
-	}
-
-	arch_suspend_enable_irqs();
-	BUG_ON(irqs_disabled());
-
- Enable_cpus:
-	enable_nonboot_cpus();
-
- Platform_wake:
-	if (suspend_ops->wake)
-		suspend_ops->wake();
-
- Power_up_devices:
-	device_power_up(PMSG_RESUME);
-
- Platfrom_finish:
-	if (suspend_ops->finish)
-		suspend_ops->finish();
-
-	return error;
-}
-
-/**
- *	suspend_devices_and_enter - suspend devices and enter the desired system
- *				    sleep state.
- *	@state:		  state to enter
- */
-int suspend_devices_and_enter(suspend_state_t state)
-{
-	int error;
-
-	if (!suspend_ops)
-		return -ENOSYS;
-
-	if (suspend_ops->begin) {
-		error = suspend_ops->begin(state);
-		if (error)
-			goto Close;
-	}
-	suspend_console();
-	suspend_test_start();
-	error = device_suspend(PMSG_SUSPEND);
-	if (error) {
-		printk(KERN_ERR "PM: Some devices failed to suspend\n");
-		goto Recover_platform;
-	}
-	suspend_test_finish("suspend devices");
-	if (suspend_test(TEST_DEVICES))
-		goto Recover_platform;
-
-	suspend_enter(state);
-
- Resume_devices:
-	suspend_test_start();
-	device_resume(PMSG_RESUME);
-	suspend_test_finish("resume devices");
-	resume_console();
- Close:
-	if (suspend_ops->end)
-		suspend_ops->end();
-	return error;
-
- Recover_platform:
-	if (suspend_ops->recover)
-		suspend_ops->recover();
-	goto Resume_devices;
-}
-
-/**
- *	suspend_finish - Do final work before exiting suspend sequence.
- *
- *	Call platform code to clean up, restart processes, and free the 
- *	console that we've allocated. This is not called for suspend-to-disk.
- */
-static void suspend_finish(void)
-{
-	suspend_thaw_processes();
-	usermodehelper_enable();
-	pm_notifier_call_chain(PM_POST_SUSPEND);
-	pm_restore_console();
-}
-
-
-
-
-static const char * const pm_states[PM_SUSPEND_MAX] = {
-	[PM_SUSPEND_STANDBY]	= "standby",
-	[PM_SUSPEND_MEM]	= "mem",
-};
-
-static inline int valid_state(suspend_state_t state)
-{
-	/* All states need lowlevel support and need to be valid
-	 * to the lowlevel implementation, no valid callback
-	 * implies that none are valid. */
-	if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state))
-		return 0;
-	return 1;
-}
-
-
-/**
- *	enter_state - Do common work of entering low-power state.
- *	@state:		pm_state structure for state we're entering.
- *
- *	Make sure we're the only ones trying to enter a sleep state. Fail
- *	if someone has beat us to it, since we don't want anything weird to
- *	happen when we wake up.
- *	Then, do the setup for suspend, enter the state, and cleaup (after
- *	we've woken up).
- */
-static int enter_state(suspend_state_t state)
-{
-	int error;
-
-	if (!valid_state(state))
-		return -ENODEV;
-
-	if (!mutex_trylock(&pm_mutex))
-		return -EBUSY;
-
-	printk(KERN_INFO "PM: Syncing filesystems ... ");
-	sys_sync();
-	printk("done.\n");
-
-	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
-	error = suspend_prepare();
-	if (error)
-		goto Unlock;
-
-	if (suspend_test(TEST_FREEZER))
-		goto Finish;
-
-	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
-	error = suspend_devices_and_enter(state);
-
- Finish:
-	pr_debug("PM: Finishing wakeup.\n");
-	suspend_finish();
- Unlock:
-	mutex_unlock(&pm_mutex);
-	return error;
-}
-
-
-/**
- *	pm_suspend - Externally visible function for suspending system.
- *	@state:		Enumerated value of state to enter.
- *
- *	Determine whether or not value is within range, get state 
- *	structure, and enter (above).
- */
-
-int pm_suspend(suspend_state_t state)
-{
-	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
-		return enter_state(state);
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(pm_suspend);
-
-#endif /* CONFIG_SUSPEND */
-
 struct kobject *power_kobj;
 
 /**
@@ -498,7 +120,6 @@ struct kobject *power_kobj;
  *	store() accepts one of those strings, translates it into the 
  *	proper enumerated value, and initiates a suspend transition.
  */
-
 static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr,
 			  char *buf)
 {
@@ -596,7 +217,6 @@ static struct attribute_group attr_group = {
 	.attrs = g,
 };
 
-
 static int __init pm_init(void)
 {
 	power_kobj = kobject_create_and_add("power", NULL);
@@ -606,144 +226,3 @@ static int __init pm_init(void)
 }
 
 core_initcall(pm_init);
-
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-#include <linux/rtc.h>
-
-/*
- * To test system suspend, we need a hands-off mechanism to resume the
- * system.  RTCs wake alarms are a common self-contained mechanism.
- */
-
-static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
-{
-	static char err_readtime[] __initdata =
-		KERN_ERR "PM: can't read %s time, err %d\n";
-	static char err_wakealarm [] __initdata =
-		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
-	static char err_suspend[] __initdata =
-		KERN_ERR "PM: suspend test failed, error %d\n";
-	static char info_test[] __initdata =
-		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
-
-	unsigned long		now;
-	struct rtc_wkalrm	alm;
-	int			status;
-
-	/* this may fail if the RTC hasn't been initialized */
-	status = rtc_read_time(rtc, &alm.time);
-	if (status < 0) {
-		printk(err_readtime, dev_name(&rtc->dev), status);
-		return;
-	}
-	rtc_tm_to_time(&alm.time, &now);
-
-	memset(&alm, 0, sizeof alm);
-	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
-	alm.enabled = true;
-
-	status = rtc_set_alarm(rtc, &alm);
-	if (status < 0) {
-		printk(err_wakealarm, dev_name(&rtc->dev), status);
-		return;
-	}
-
-	if (state == PM_SUSPEND_MEM) {
-		printk(info_test, pm_states[state]);
-		status = pm_suspend(state);
-		if (status == -ENODEV)
-			state = PM_SUSPEND_STANDBY;
-	}
-	if (state == PM_SUSPEND_STANDBY) {
-		printk(info_test, pm_states[state]);
-		status = pm_suspend(state);
-	}
-	if (status < 0)
-		printk(err_suspend, status);
-
-	/* Some platforms can't detect that the alarm triggered the
-	 * wakeup, or (accordingly) disable it after it afterwards.
-	 * It's supposed to give oneshot behavior; cope.
-	 */
-	alm.enabled = false;
-	rtc_set_alarm(rtc, &alm);
-}
-
-static int __init has_wakealarm(struct device *dev, void *name_ptr)
-{
-	struct rtc_device *candidate = to_rtc_device(dev);
-
-	if (!candidate->ops->set_alarm)
-		return 0;
-	if (!device_may_wakeup(candidate->dev.parent))
-		return 0;
-
-	*(const char **)name_ptr = dev_name(dev);
-	return 1;
-}
-
-/*
- * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
- * at startup time.  They're normally disabled, for faster boot and because
- * we can't know which states really work on this particular system.
- */
-static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
-
-static char warn_bad_state[] __initdata =
-	KERN_WARNING "PM: can't test '%s' suspend state\n";
-
-static int __init setup_test_suspend(char *value)
-{
-	unsigned i;
-
-	/* "=mem" ==> "mem" */
-	value++;
-	for (i = 0; i < PM_SUSPEND_MAX; i++) {
-		if (!pm_states[i])
-			continue;
-		if (strcmp(pm_states[i], value) != 0)
-			continue;
-		test_state = (__force suspend_state_t) i;
-		return 0;
-	}
-	printk(warn_bad_state, value);
-	return 0;
-}
-__setup("test_suspend", setup_test_suspend);
-
-static int __init test_suspend(void)
-{
-	static char		warn_no_rtc[] __initdata =
-		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
-
-	char			*pony = NULL;
-	struct rtc_device	*rtc = NULL;
-
-	/* PM is initialized by now; is that state testable? */
-	if (test_state == PM_SUSPEND_ON)
-		goto done;
-	if (!valid_state(test_state)) {
-		printk(warn_bad_state, pm_states[test_state]);
-		goto done;
-	}
-
-	/* RTCs have initialized by now too ... can we use one? */
-	class_find_device(rtc_class, NULL, &pony, has_wakealarm);
-	if (pony)
-		rtc = rtc_class_open(pony);
-	if (!rtc) {
-		printk(warn_no_rtc);
-		goto done;
-	}
-
-	/* go for it */
-	test_wakealarm(rtc, test_state);
-	rtc_class_close(rtc);
-done:
-	return 0;
-}
-late_initcall(test_suspend);
-
-#endif /* CONFIG_PM_TEST_SUSPEND */
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 46b5ec7a3af..26d5a26f82e 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -45,7 +45,7 @@ static inline char *check_image_kernel(struct swsusp_info *info)
  */
 #define SPARE_PAGES	((1024 * 1024) >> PAGE_SHIFT)
 
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
 extern int hibernation_snapshot(int platform_mode);
 extern int hibernation_restore(int platform_mode);
 extern int hibernation_platform_enter(void);
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resume(void);
 
 extern int create_basic_memory_bitmaps(void);
 extern void free_basic_memory_bitmaps(void);
-extern unsigned int count_data_pages(void);
+extern int swsusp_shrink_memory(void);
 
 /**
  *	Auxiliary structure used for reading the snapshot image data and
@@ -147,9 +147,8 @@ extern int swsusp_swap_in_use(void);
  */
 #define SF_PLATFORM_MODE	1
 
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
 extern int swsusp_check(void);
-extern int swsusp_shrink_memory(void);
 extern void swsusp_free(void);
 extern int swsusp_read(unsigned int *flags_p);
 extern int swsusp_write(unsigned int flags);
@@ -161,22 +160,36 @@ extern void swsusp_show_speed(struct timeval *, struct timeval *,
 				unsigned int, char *);
 
 #ifdef CONFIG_SUSPEND
-/* kernel/power/main.c */
+/* kernel/power/suspend.c */
+extern const char *const pm_states[];
+
+extern bool valid_state(suspend_state_t state);
 extern int suspend_devices_and_enter(suspend_state_t state);
+extern int enter_state(suspend_state_t state);
 #else /* !CONFIG_SUSPEND */
 static inline int suspend_devices_and_enter(suspend_state_t state)
 {
 	return -ENOSYS;
 }
+static inline int enter_state(suspend_state_t state) { return -ENOSYS; }
+static inline bool valid_state(suspend_state_t state) { return false; }
 #endif /* !CONFIG_SUSPEND */
 
+#ifdef CONFIG_PM_TEST_SUSPEND
+/* kernel/power/suspend_test.c */
+extern void suspend_test_start(void);
+extern void suspend_test_finish(const char *label);
+#else /* !CONFIG_PM_TEST_SUSPEND */
+static inline void suspend_test_start(void) {}
+static inline void suspend_test_finish(const char *label) {}
+#endif /* !CONFIG_PM_TEST_SUSPEND */
+
 #ifdef CONFIG_PM_SLEEP
 /* kernel/power/main.c */
 extern int pm_notifier_call_chain(unsigned long val);
 #endif
 
 #ifdef CONFIG_HIGHMEM
-unsigned int count_highmem_pages(void);
 int restore_highmem(void);
 #else
 static inline unsigned int count_highmem_pages(void) { return 0; }
diff --git a/kernel/power/poweroff.c b/kernel/power/poweroff.c
index 97890831e1b..e8b33700627 100644
--- a/kernel/power/poweroff.c
+++ b/kernel/power/poweroff.c
@@ -34,7 +34,7 @@ static struct sysrq_key_op	sysrq_poweroff_op = {
 	.handler        = handle_poweroff,
 	.help_msg       = "powerOff",
 	.action_msg     = "Power Off",
- 	.enable_mask	= SYSRQ_ENABLE_BOOT,
+	.enable_mask	= SYSRQ_ENABLE_BOOT,
 };
 
 static int pm_sysrq_init(void)
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 33e2e4a819f..523a451b45d 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -39,6 +39,14 @@ static int swsusp_page_is_free(struct page *);
 static void swsusp_set_page_forbidden(struct page *);
 static void swsusp_unset_page_forbidden(struct page *);
 
+/*
+ * Preferred image size in bytes (tunable via /sys/power/image_size).
+ * When it is set to N, swsusp will do its best to ensure the image
+ * size will not exceed N bytes, but if that is impossible, it will
+ * try to create the smallest image possible.
+ */
+unsigned long image_size = 500 * 1024 * 1024;
+
 /* List of PBEs needed for restoring the pages that were allocated before
  * the suspend and included in the suspend image, but have also been
  * allocated by the "resume" kernel, so their contents cannot be written
@@ -840,7 +848,7 @@ static struct page *saveable_highmem_page(struct zone *zone, unsigned long pfn)
  *	pages.
  */
 
-unsigned int count_highmem_pages(void)
+static unsigned int count_highmem_pages(void)
 {
 	struct zone *zone;
 	unsigned int n = 0;
@@ -902,7 +910,7 @@ static struct page *saveable_page(struct zone *zone, unsigned long pfn)
  *	pages.
  */
 
-unsigned int count_data_pages(void)
+static unsigned int count_data_pages(void)
 {
 	struct zone *zone;
 	unsigned long pfn, max_zone_pfn;
@@ -1058,6 +1066,74 @@ void swsusp_free(void)
 	buffer = NULL;
 }
 
+/**
+ *	swsusp_shrink_memory -  Try to free as much memory as needed
+ *
+ *	... but do not OOM-kill anyone
+ *
+ *	Notice: all userland should be stopped before it is called, or
+ *	livelock is possible.
+ */
+
+#define SHRINK_BITE	10000
+static inline unsigned long __shrink_memory(long tmp)
+{
+	if (tmp > SHRINK_BITE)
+		tmp = SHRINK_BITE;
+	return shrink_all_memory(tmp);
+}
+
+int swsusp_shrink_memory(void)
+{
+	long tmp;
+	struct zone *zone;
+	unsigned long pages = 0;
+	unsigned int i = 0;
+	char *p = "-\\|/";
+	struct timeval start, stop;
+
+	printk(KERN_INFO "PM: Shrinking memory...  ");
+	do_gettimeofday(&start);
+	do {
+		long size, highmem_size;
+
+		highmem_size = count_highmem_pages();
+		size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
+		tmp = size;
+		size += highmem_size;
+		for_each_populated_zone(zone) {
+			tmp += snapshot_additional_pages(zone);
+			if (is_highmem(zone)) {
+				highmem_size -=
+					zone_page_state(zone, NR_FREE_PAGES);
+			} else {
+				tmp -= zone_page_state(zone, NR_FREE_PAGES);
+				tmp += zone->lowmem_reserve[ZONE_NORMAL];
+			}
+		}
+
+		if (highmem_size < 0)
+			highmem_size = 0;
+
+		tmp += highmem_size;
+		if (tmp > 0) {
+			tmp = __shrink_memory(tmp);
+			if (!tmp)
+				return -ENOMEM;
+			pages += tmp;
+		} else if (size > image_size / PAGE_SIZE) {
+			tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
+			pages += tmp;
+		}
+		printk("\b%c", p[i++%4]);
+	} while (tmp > 0);
+	do_gettimeofday(&stop);
+	printk("\bdone (%lu pages freed)\n", pages);
+	swsusp_show_speed(&start, &stop, pages, "Freed");
+
+	return 0;
+}
+
 #ifdef CONFIG_HIGHMEM
 /**
   *	count_pages_for_highmem - compute the number of non-highmem pages
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
new file mode 100644
index 00000000000..6f10dfc2d3e
--- /dev/null
+++ b/kernel/power/suspend.c
@@ -0,0 +1,300 @@
+/*
+ * kernel/power/suspend.c - Suspend to RAM and standby functionality.
+ *
+ * Copyright (c) 2003 Patrick Mochel
+ * Copyright (c) 2003 Open Source Development Lab
+ * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/cpu.h>
+#include <linux/syscalls.h>
+
+#include "power.h"
+
+const char *const pm_states[PM_SUSPEND_MAX] = {
+	[PM_SUSPEND_STANDBY]	= "standby",
+	[PM_SUSPEND_MEM]	= "mem",
+};
+
+static struct platform_suspend_ops *suspend_ops;
+
+/**
+ *	suspend_set_ops - Set the global suspend method table.
+ *	@ops:	Pointer to ops structure.
+ */
+void suspend_set_ops(struct platform_suspend_ops *ops)
+{
+	mutex_lock(&pm_mutex);
+	suspend_ops = ops;
+	mutex_unlock(&pm_mutex);
+}
+
+bool valid_state(suspend_state_t state)
+{
+	/*
+	 * All states need lowlevel support and need to be valid to the lowlevel
+	 * implementation, no valid callback implies that none are valid.
+	 */
+	return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
+}
+
+/**
+ * suspend_valid_only_mem - generic memory-only valid callback
+ *
+ * Platform drivers that implement mem suspend only and only need
+ * to check for that in their .valid callback can use this instead
+ * of rolling their own .valid callback.
+ */
+int suspend_valid_only_mem(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+static int suspend_test(int level)
+{
+#ifdef CONFIG_PM_DEBUG
+	if (pm_test_level == level) {
+		printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
+		mdelay(5000);
+		return 1;
+	}
+#endif /* !CONFIG_PM_DEBUG */
+	return 0;
+}
+
+/**
+ *	suspend_prepare - Do prep work before entering low-power state.
+ *
+ *	This is common code that is called for each state that we're entering.
+ *	Run suspend notifiers, allocate a console and stop all processes.
+ */
+static int suspend_prepare(void)
+{
+	int error;
+
+	if (!suspend_ops || !suspend_ops->enter)
+		return -EPERM;
+
+	pm_prepare_console();
+
+	error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
+	if (error)
+		goto Finish;
+
+	error = usermodehelper_disable();
+	if (error)
+		goto Finish;
+
+	error = suspend_freeze_processes();
+	if (!error)
+		return 0;
+
+	suspend_thaw_processes();
+	usermodehelper_enable();
+ Finish:
+	pm_notifier_call_chain(PM_POST_SUSPEND);
+	pm_restore_console();
+	return error;
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
+{
+	local_irq_disable();
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
+{
+	local_irq_enable();
+}
+
+/**
+ *	suspend_enter - enter the desired system sleep state.
+ *	@state:		state to enter
+ *
+ *	This function should be called after devices have been suspended.
+ */
+static int suspend_enter(suspend_state_t state)
+{
+	int error;
+
+	if (suspend_ops->prepare) {
+		error = suspend_ops->prepare();
+		if (error)
+			return error;
+	}
+
+	error = dpm_suspend_noirq(PMSG_SUSPEND);
+	if (error) {
+		printk(KERN_ERR "PM: Some devices failed to power down\n");
+		goto Platfrom_finish;
+	}
+
+	if (suspend_ops->prepare_late) {
+		error = suspend_ops->prepare_late();
+		if (error)
+			goto Power_up_devices;
+	}
+
+	if (suspend_test(TEST_PLATFORM))
+		goto Platform_wake;
+
+	error = disable_nonboot_cpus();
+	if (error || suspend_test(TEST_CPUS))
+		goto Enable_cpus;
+
+	arch_suspend_disable_irqs();
+	BUG_ON(!irqs_disabled());
+
+	error = sysdev_suspend(PMSG_SUSPEND);
+	if (!error) {
+		if (!suspend_test(TEST_CORE))
+			error = suspend_ops->enter(state);
+		sysdev_resume();
+	}
+
+	arch_suspend_enable_irqs();
+	BUG_ON(irqs_disabled());
+
+ Enable_cpus:
+	enable_nonboot_cpus();
+
+ Platform_wake:
+	if (suspend_ops->wake)
+		suspend_ops->wake();
+
+ Power_up_devices:
+	dpm_resume_noirq(PMSG_RESUME);
+
+ Platfrom_finish:
+	if (suspend_ops->finish)
+		suspend_ops->finish();
+
+	return error;
+}
+
+/**
+ *	suspend_devices_and_enter - suspend devices and enter the desired system
+ *				    sleep state.
+ *	@state:		  state to enter
+ */
+int suspend_devices_and_enter(suspend_state_t state)
+{
+	int error;
+
+	if (!suspend_ops)
+		return -ENOSYS;
+
+	if (suspend_ops->begin) {
+		error = suspend_ops->begin(state);
+		if (error)
+			goto Close;
+	}
+	suspend_console();
+	suspend_test_start();
+	error = dpm_suspend_start(PMSG_SUSPEND);
+	if (error) {
+		printk(KERN_ERR "PM: Some devices failed to suspend\n");
+		goto Recover_platform;
+	}
+	suspend_test_finish("suspend devices");
+	if (suspend_test(TEST_DEVICES))
+		goto Recover_platform;
+
+	suspend_enter(state);
+
+ Resume_devices:
+	suspend_test_start();
+	dpm_resume_end(PMSG_RESUME);
+	suspend_test_finish("resume devices");
+	resume_console();
+ Close:
+	if (suspend_ops->end)
+		suspend_ops->end();
+	return error;
+
+ Recover_platform:
+	if (suspend_ops->recover)
+		suspend_ops->recover();
+	goto Resume_devices;
+}
+
+/**
+ *	suspend_finish - Do final work before exiting suspend sequence.
+ *
+ *	Call platform code to clean up, restart processes, and free the
+ *	console that we've allocated. This is not called for suspend-to-disk.
+ */
+static void suspend_finish(void)
+{
+	suspend_thaw_processes();
+	usermodehelper_enable();
+	pm_notifier_call_chain(PM_POST_SUSPEND);
+	pm_restore_console();
+}
+
+/**
+ *	enter_state - Do common work of entering low-power state.
+ *	@state:		pm_state structure for state we're entering.
+ *
+ *	Make sure we're the only ones trying to enter a sleep state. Fail
+ *	if someone has beat us to it, since we don't want anything weird to
+ *	happen when we wake up.
+ *	Then, do the setup for suspend, enter the state, and cleaup (after
+ *	we've woken up).
+ */
+int enter_state(suspend_state_t state)
+{
+	int error;
+
+	if (!valid_state(state))
+		return -ENODEV;
+
+	if (!mutex_trylock(&pm_mutex))
+		return -EBUSY;
+
+	printk(KERN_INFO "PM: Syncing filesystems ... ");
+	sys_sync();
+	printk("done.\n");
+
+	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
+	error = suspend_prepare();
+	if (error)
+		goto Unlock;
+
+	if (suspend_test(TEST_FREEZER))
+		goto Finish;
+
+	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+	error = suspend_devices_and_enter(state);
+
+ Finish:
+	pr_debug("PM: Finishing wakeup.\n");
+	suspend_finish();
+ Unlock:
+	mutex_unlock(&pm_mutex);
+	return error;
+}
+
+/**
+ *	pm_suspend - Externally visible function for suspending system.
+ *	@state:		Enumerated value of state to enter.
+ *
+ *	Determine whether or not value is within range, get state
+ *	structure, and enter (above).
+ */
+int pm_suspend(suspend_state_t state)
+{
+	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
+		return enter_state(state);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(pm_suspend);
diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c
new file mode 100644
index 00000000000..17d8bb1acf9
--- /dev/null
+++ b/kernel/power/suspend_test.c
@@ -0,0 +1,187 @@
+/*
+ * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
+ *
+ * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/rtc.h>
+
+#include "power.h"
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending.  Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS	5
+
+static unsigned long suspend_test_start_time;
+
+void suspend_test_start(void)
+{
+	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
+	 * What we want is a hardware counter that will work correctly even
+	 * during the irqs-are-off stages of the suspend/resume cycle...
+	 */
+	suspend_test_start_time = jiffies;
+}
+
+void suspend_test_finish(const char *label)
+{
+	long nj = jiffies - suspend_test_start_time;
+	unsigned msec;
+
+	msec = jiffies_to_msecs(abs(nj));
+	pr_info("PM: %s took %d.%03d seconds\n", label,
+			msec / 1000, msec % 1000);
+
+	/* Warning on suspend means the RTC alarm period needs to be
+	 * larger -- the system was sooo slooowwww to suspend that the
+	 * alarm (should have) fired before the system went to sleep!
+	 *
+	 * Warning on either suspend or resume also means the system
+	 * has some performance issues.  The stack dump of a WARN_ON
+	 * is more likely to get the right attention than a printk...
+	 */
+	WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
+}
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system.  RTCs wake alarms are a common self-contained mechanism.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+	static char err_readtime[] __initdata =
+		KERN_ERR "PM: can't read %s time, err %d\n";
+	static char err_wakealarm [] __initdata =
+		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+	static char err_suspend[] __initdata =
+		KERN_ERR "PM: suspend test failed, error %d\n";
+	static char info_test[] __initdata =
+		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+	unsigned long		now;
+	struct rtc_wkalrm	alm;
+	int			status;
+
+	/* this may fail if the RTC hasn't been initialized */
+	status = rtc_read_time(rtc, &alm.time);
+	if (status < 0) {
+		printk(err_readtime, dev_name(&rtc->dev), status);
+		return;
+	}
+	rtc_tm_to_time(&alm.time, &now);
+
+	memset(&alm, 0, sizeof alm);
+	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+	alm.enabled = true;
+
+	status = rtc_set_alarm(rtc, &alm);
+	if (status < 0) {
+		printk(err_wakealarm, dev_name(&rtc->dev), status);
+		return;
+	}
+
+	if (state == PM_SUSPEND_MEM) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+		if (status == -ENODEV)
+			state = PM_SUSPEND_STANDBY;
+	}
+	if (state == PM_SUSPEND_STANDBY) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+	}
+	if (status < 0)
+		printk(err_suspend, status);
+
+	/* Some platforms can't detect that the alarm triggered the
+	 * wakeup, or (accordingly) disable it after it afterwards.
+	 * It's supposed to give oneshot behavior; cope.
+	 */
+	alm.enabled = false;
+	rtc_set_alarm(rtc, &alm);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+	struct rtc_device *candidate = to_rtc_device(dev);
+
+	if (!candidate->ops->set_alarm)
+		return 0;
+	if (!device_may_wakeup(candidate->dev.parent))
+		return 0;
+
+	*(const char **)name_ptr = dev_name(dev);
+	return 1;
+}
+
+/*
+ * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
+ * at startup time.  They're normally disabled, for faster boot and because
+ * we can't know which states really work on this particular system.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
+
+static char warn_bad_state[] __initdata =
+	KERN_WARNING "PM: can't test '%s' suspend state\n";
+
+static int __init setup_test_suspend(char *value)
+{
+	unsigned i;
+
+	/* "=mem" ==> "mem" */
+	value++;
+	for (i = 0; i < PM_SUSPEND_MAX; i++) {
+		if (!pm_states[i])
+			continue;
+		if (strcmp(pm_states[i], value) != 0)
+			continue;
+		test_state = (__force suspend_state_t) i;
+		return 0;
+	}
+	printk(warn_bad_state, value);
+	return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+	static char		warn_no_rtc[] __initdata =
+		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+	char			*pony = NULL;
+	struct rtc_device	*rtc = NULL;
+
+	/* PM is initialized by now; is that state testable? */
+	if (test_state == PM_SUSPEND_ON)
+		goto done;
+	if (!valid_state(test_state)) {
+		printk(warn_bad_state, pm_states[test_state]);
+		goto done;
+	}
+
+	/* RTCs have initialized by now too ... can we use one? */
+	class_find_device(rtc_class, NULL, &pony, has_wakealarm);
+	if (pony)
+		rtc = rtc_class_open(pony);
+	if (!rtc) {
+		printk(warn_no_rtc);
+		goto done;
+	}
+
+	/* go for it */
+	test_wakealarm(rtc, test_state);
+	rtc_class_close(rtc);
+done:
+	return 0;
+}
+late_initcall(test_suspend);
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 78c35047586..6a07f4dbf2f 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -55,14 +55,6 @@
 
 #include "power.h"
 
-/*
- * Preferred image size in bytes (tunable via /sys/power/image_size).
- * When it is set to N, swsusp will do its best to ensure the image
- * size will not exceed N bytes, but if that is impossible, it will
- * try to create the smallest image possible.
- */
-unsigned long image_size = 500 * 1024 * 1024;
-
 int in_suspend __nosavedata = 0;
 
 /**
@@ -194,193 +186,3 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop,
 			centisecs / 100, centisecs % 100,
 			kps / 1000, (kps % 1000) / 10);
 }
-
-/**
- *	swsusp_shrink_memory -  Try to free as much memory as needed
- *
- *	... but do not OOM-kill anyone
- *
- *	Notice: all userland should be stopped before it is called, or
- *	livelock is possible.
- */
-
-#define SHRINK_BITE	10000
-static inline unsigned long __shrink_memory(long tmp)
-{
-	if (tmp > SHRINK_BITE)
-		tmp = SHRINK_BITE;
-	return shrink_all_memory(tmp);
-}
-
-int swsusp_shrink_memory(void)
-{
-	long tmp;
-	struct zone *zone;
-	unsigned long pages = 0;
-	unsigned int i = 0;
-	char *p = "-\\|/";
-	struct timeval start, stop;
-
-	printk(KERN_INFO "PM: Shrinking memory...  ");
-	do_gettimeofday(&start);
-	do {
-		long size, highmem_size;
-
-		highmem_size = count_highmem_pages();
-		size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
-		tmp = size;
-		size += highmem_size;
-		for_each_populated_zone(zone) {
-			tmp += snapshot_additional_pages(zone);
-			if (is_highmem(zone)) {
-				highmem_size -=
-					zone_page_state(zone, NR_FREE_PAGES);
-			} else {
-				tmp -= zone_page_state(zone, NR_FREE_PAGES);
-				tmp += zone->lowmem_reserve[ZONE_NORMAL];
-			}
-		}
-
-		if (highmem_size < 0)
-			highmem_size = 0;
-
-		tmp += highmem_size;
-		if (tmp > 0) {
-			tmp = __shrink_memory(tmp);
-			if (!tmp)
-				return -ENOMEM;
-			pages += tmp;
-		} else if (size > image_size / PAGE_SIZE) {
-			tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
-			pages += tmp;
-		}
-		printk("\b%c", p[i++%4]);
-	} while (tmp > 0);
-	do_gettimeofday(&stop);
-	printk("\bdone (%lu pages freed)\n", pages);
-	swsusp_show_speed(&start, &stop, pages, "Freed");
-
-	return 0;
-}
-
-/*
- * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
- * resume.  The code below implements a mechanism allowing us to do that.
- */
-
-struct nvs_page {
-	unsigned long phys_start;
-	unsigned int size;
-	void *kaddr;
-	void *data;
-	struct list_head node;
-};
-
-static LIST_HEAD(nvs_list);
-
-/**
- *	hibernate_nvs_register - register platform NVS memory region to save
- *	@start - physical address of the region
- *	@size - size of the region
- *
- *	The NVS region need not be page-aligned (both ends) and we arrange
- *	things so that the data from page-aligned addresses in this region will
- *	be copied into separate RAM pages.
- */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
-{
-	struct nvs_page *entry, *next;
-
-	while (size > 0) {
-		unsigned int nr_bytes;
-
-		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
-		if (!entry)
-			goto Error;
-
-		list_add_tail(&entry->node, &nvs_list);
-		entry->phys_start = start;
-		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
-		entry->size = (size < nr_bytes) ? size : nr_bytes;
-
-		start += entry->size;
-		size -= entry->size;
-	}
-	return 0;
-
- Error:
-	list_for_each_entry_safe(entry, next, &nvs_list, node) {
-		list_del(&entry->node);
-		kfree(entry);
-	}
-	return -ENOMEM;
-}
-
-/**
- *	hibernate_nvs_free - free data pages allocated for saving NVS regions
- */
-void hibernate_nvs_free(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			free_page((unsigned long)entry->data);
-			entry->data = NULL;
-			if (entry->kaddr) {
-				iounmap(entry->kaddr);
-				entry->kaddr = NULL;
-			}
-		}
-}
-
-/**
- *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
- */
-int hibernate_nvs_alloc(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node) {
-		entry->data = (void *)__get_free_page(GFP_KERNEL);
-		if (!entry->data) {
-			hibernate_nvs_free();
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-/**
- *	hibernate_nvs_save - save NVS memory regions
- */
-void hibernate_nvs_save(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Saving platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			entry->kaddr = ioremap(entry->phys_start, entry->size);
-			memcpy(entry->data, entry->kaddr, entry->size);
-		}
-}
-
-/**
- *	hibernate_nvs_restore - restore NVS memory regions
- *
- *	This function is going to be called with interrupts disabled, so it
- *	cannot iounmap the virtual addresses used to access the NVS region.
- */
-void hibernate_nvs_restore(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data)
-			memcpy(entry->kaddr, entry->data, entry->size);
-}
diff --git a/kernel/printk.c b/kernel/printk.c
index 5052b5497c6..b4d97b54c1e 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -687,20 +687,35 @@ asmlinkage int vprintk(const char *fmt, va_list args)
 				  sizeof(printk_buf) - printed_len, fmt, args);
 
 
+	p = printk_buf;
+
+	/* Do we have a loglevel in the string? */
+	if (p[0] == '<') {
+		unsigned char c = p[1];
+		if (c && p[2] == '>') {
+			switch (c) {
+			case '0' ... '7': /* loglevel */
+				current_log_level = c - '0';
+			/* Fallthrough - make sure we're on a new line */
+			case 'd': /* KERN_DEFAULT */
+				if (!new_text_line) {
+					emit_log_char('\n');
+					new_text_line = 1;
+				}
+			/* Fallthrough - skip the loglevel */
+			case 'c': /* KERN_CONT */
+				p += 3;
+				break;
+			}
+		}
+	}
+
 	/*
 	 * Copy the output into log_buf.  If the caller didn't provide
 	 * appropriate log level tags, we insert them here
 	 */
-	for (p = printk_buf; *p; p++) {
+	for ( ; *p; p++) {
 		if (new_text_line) {
-			/* If a token, set current_log_level and skip over */
-			if (p[0] == '<' && p[1] >= '0' && p[1] <= '7' &&
-			    p[2] == '>') {
-				current_log_level = p[1] - '0';
-				p += 3;
-				printed_len -= 3;
-			}
-
 			/* Always output the token */
 			emit_log_char('<');
 			emit_log_char(current_log_level + '0');
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index 820c5af44f3..fcd107a78c5 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -902,7 +902,7 @@ EXPORT_SYMBOL_GPL(rt_mutex_lock_interruptible);
  * Returns:
  *  0 		on success
  * -EINTR 	when interrupted by a signal
- * -ETIMEOUT	when the timeout expired
+ * -ETIMEDOUT	when the timeout expired
  * -EDEADLK	when the lock would deadlock (when deadlock detection is on)
  */
 int
diff --git a/kernel/sched.c b/kernel/sched.c
index f04aa966450..8fb88a906aa 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -240,7 +240,7 @@ static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
 		hard = hrtimer_get_expires(&rt_b->rt_period_timer);
 		delta = ktime_to_ns(ktime_sub(hard, soft));
 		__hrtimer_start_range_ns(&rt_b->rt_period_timer, soft, delta,
-				HRTIMER_MODE_ABS, 0);
+				HRTIMER_MODE_ABS_PINNED, 0);
 	}
 	spin_unlock(&rt_b->rt_runtime_lock);
 }
@@ -1155,7 +1155,7 @@ static __init void init_hrtick(void)
 static void hrtick_start(struct rq *rq, u64 delay)
 {
 	__hrtimer_start_range_ns(&rq->hrtick_timer, ns_to_ktime(delay), 0,
-			HRTIMER_MODE_REL, 0);
+			HRTIMER_MODE_REL_PINNED, 0);
 }
 
 static inline void init_hrtick(void)
@@ -2192,6 +2192,7 @@ void kick_process(struct task_struct *p)
 		smp_send_reschedule(cpu);
 	preempt_enable();
 }
+EXPORT_SYMBOL_GPL(kick_process);
 
 /*
  * Return a low guess at the load of a migration-source cpu weighted
@@ -4396,6 +4397,11 @@ static struct {
 	.load_balancer = ATOMIC_INIT(-1),
 };
 
+int get_nohz_load_balancer(void)
+{
+	return atomic_read(&nohz.load_balancer);
+}
+
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
 /**
  * lowest_flag_domain - Return lowest sched_domain containing flag.
@@ -9028,6 +9034,8 @@ void __init sched_init_smp(void)
 }
 #endif /* CONFIG_SMP */
 
+const_debug unsigned int sysctl_timer_migration = 1;
+
 int in_sched_functions(unsigned long addr)
 {
 	return in_lock_functions(addr) ||
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ce664f98e3f..0e51a35a448 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -328,6 +328,14 @@ static struct ctl_table kern_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "timer_migration",
+		.data		= &sysctl_timer_migration,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
 #endif
 	{
 		.ctl_name	= CTL_UNNUMBERED,
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index d13be216a79..1ad6dd46111 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -18,6 +18,7 @@
 #include <linux/notifier.h>
 #include <linux/smp.h>
 #include <linux/sysdev.h>
+#include <linux/tick.h>
 
 /* The registered clock event devices */
 static LIST_HEAD(clockevent_devices);
@@ -54,6 +55,7 @@ unsigned long clockevent_delta2ns(unsigned long latch,
 
 	return (unsigned long) clc;
 }
+EXPORT_SYMBOL_GPL(clockevent_delta2ns);
 
 /**
  * clockevents_set_mode - set the operating mode of a clock event device
@@ -187,6 +189,7 @@ void clockevents_register_device(struct clock_event_device *dev)
 
 	spin_unlock(&clockevents_lock);
 }
+EXPORT_SYMBOL_GPL(clockevents_register_device);
 
 /*
  * Noop handler when we shut down an event device
@@ -251,4 +254,15 @@ void clockevents_notify(unsigned long reason, void *arg)
 	spin_unlock(&clockevents_lock);
 }
 EXPORT_SYMBOL_GPL(clockevents_notify);
+
+ktime_t clockevents_get_next_event(int cpu)
+{
+	struct tick_device *td;
+	struct clock_event_device *dev;
+
+	td = &per_cpu(tick_cpu_device, cpu);
+	dev = td->evtdev;
+
+	return dev->next_event;
+}
 #endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 80189f6f1c5..592bf584d1d 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -509,6 +509,18 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 		}
 	}
 
+	/*
+	 * Check to make sure we don't switch to a non-highres capable
+	 * clocksource if the tick code is in oneshot mode (highres or nohz)
+	 */
+	if (tick_oneshot_mode_active() &&
+	    !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
+		printk(KERN_WARNING "%s clocksource is not HRT compatible. "
+			"Cannot switch while in HRT/NOHZ mode\n", ovr->name);
+		ovr = NULL;
+		override_name[0] = 0;
+	}
+
 	/* Reselect, when the override name has changed */
 	if (ovr != clocksource_override) {
 		clocksource_override = ovr;
@@ -537,7 +549,13 @@ sysfs_show_available_clocksources(struct sys_device *dev,
 
 	spin_lock_irq(&clocksource_lock);
 	list_for_each_entry(src, &clocksource_list, list) {
-		count += snprintf(buf + count,
+		/*
+		 * Don't show non-HRES clocksource if the tick code is
+		 * in one shot mode (highres=on or nohz=on)
+		 */
+		if (!tick_oneshot_mode_active() ||
+		    (src->flags & CLOCK_SOURCE_VALID_FOR_HRES))
+			count += snprintf(buf + count,
 				  max((ssize_t)PAGE_SIZE - count, (ssize_t)0),
 				  "%s ", src->name);
 	}
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 118a3b3b3f9..877dbedc311 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -27,7 +27,7 @@
  * timer stops in C3 state.
  */
 
-struct tick_device tick_broadcast_device;
+static struct tick_device tick_broadcast_device;
 /* FIXME: Use cpumask_var_t. */
 static DECLARE_BITMAP(tick_broadcast_mask, NR_CPUS);
 static DECLARE_BITMAP(tmpmask, NR_CPUS);
diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 2e8de678e76..a96c0e2b89c 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -128,6 +128,23 @@ int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *))
 	return 0;
 }
 
+/**
+ * tick_check_oneshot_mode - check whether the system is in oneshot mode
+ *
+ * returns 1 when either nohz or highres are enabled. otherwise 0.
+ */
+int tick_oneshot_mode_active(void)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __get_cpu_var(tick_cpu_device).mode == TICKDEV_MODE_ONESHOT;
+	local_irq_restore(flags);
+
+	return ret;
+}
+
 #ifdef CONFIG_HIGH_RES_TIMERS
 /**
  * tick_init_highres - switch to high resolution mode
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index d3f1ef4d5cb..2aff39c6f10 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -349,7 +349,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 
 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
 			hrtimer_start(&ts->sched_timer, expires,
-				      HRTIMER_MODE_ABS);
+				      HRTIMER_MODE_ABS_PINNED);
 			/* Check, if the timer was already in the past */
 			if (hrtimer_active(&ts->sched_timer))
 				goto out;
@@ -395,7 +395,7 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
 
 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
 			hrtimer_start_expires(&ts->sched_timer,
-				      HRTIMER_MODE_ABS);
+					      HRTIMER_MODE_ABS_PINNED);
 			/* Check, if the timer was already in the past */
 			if (hrtimer_active(&ts->sched_timer))
 				break;
@@ -698,7 +698,8 @@ void tick_setup_sched_timer(void)
 
 	for (;;) {
 		hrtimer_forward(&ts->sched_timer, now, tick_period);
-		hrtimer_start_expires(&ts->sched_timer, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(&ts->sched_timer,
+				      HRTIMER_MODE_ABS_PINNED);
 		/* Check, if the timer was already in the past */
 		if (hrtimer_active(&ts->sched_timer))
 			break;
diff --git a/kernel/timer.c b/kernel/timer.c
index c01e568935e..54d3912f8ca 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -38,6 +38,7 @@
 #include <linux/tick.h>
 #include <linux/kallsyms.h>
 #include <linux/perf_counter.h>
+#include <linux/sched.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -605,13 +606,12 @@ static struct tvec_base *lock_timer_base(struct timer_list *timer,
 }
 
 static inline int
-__mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
+__mod_timer(struct timer_list *timer, unsigned long expires,
+						bool pending_only, int pinned)
 {
 	struct tvec_base *base, *new_base;
 	unsigned long flags;
-	int ret;
-
-	ret = 0;
+	int ret = 0 , cpu;
 
 	timer_stats_timer_set_start_info(timer);
 	BUG_ON(!timer->function);
@@ -630,6 +630,18 @@ __mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
 
 	new_base = __get_cpu_var(tvec_bases);
 
+	cpu = smp_processor_id();
+
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
+		int preferred_cpu = get_nohz_load_balancer();
+
+		if (preferred_cpu >= 0)
+			cpu = preferred_cpu;
+	}
+#endif
+	new_base = per_cpu(tvec_bases, cpu);
+
 	if (base != new_base) {
 		/*
 		 * We are trying to schedule the timer on the local CPU.
@@ -669,7 +681,7 @@ out_unlock:
  */
 int mod_timer_pending(struct timer_list *timer, unsigned long expires)
 {
-	return __mod_timer(timer, expires, true);
+	return __mod_timer(timer, expires, true, TIMER_NOT_PINNED);
 }
 EXPORT_SYMBOL(mod_timer_pending);
 
@@ -703,11 +715,33 @@ int mod_timer(struct timer_list *timer, unsigned long expires)
 	if (timer->expires == expires && timer_pending(timer))
 		return 1;
 
-	return __mod_timer(timer, expires, false);
+	return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
 }
 EXPORT_SYMBOL(mod_timer);
 
 /**
+ * mod_timer_pinned - modify a timer's timeout
+ * @timer: the timer to be modified
+ * @expires: new timeout in jiffies
+ *
+ * mod_timer_pinned() is a way to update the expire field of an
+ * active timer (if the timer is inactive it will be activated)
+ * and not allow the timer to be migrated to a different CPU.
+ *
+ * mod_timer_pinned(timer, expires) is equivalent to:
+ *
+ *     del_timer(timer); timer->expires = expires; add_timer(timer);
+ */
+int mod_timer_pinned(struct timer_list *timer, unsigned long expires)
+{
+	if (timer->expires == expires && timer_pending(timer))
+		return 1;
+
+	return __mod_timer(timer, expires, false, TIMER_PINNED);
+}
+EXPORT_SYMBOL(mod_timer_pinned);
+
+/**
  * add_timer - start a timer
  * @timer: the timer to be added
  *
@@ -757,6 +791,7 @@ void add_timer_on(struct timer_list *timer, int cpu)
 	wake_up_idle_cpu(cpu);
 	spin_unlock_irqrestore(&base->lock, flags);
 }
+EXPORT_SYMBOL_GPL(add_timer_on);
 
 /**
  * del_timer - deactive a timer.
@@ -1016,6 +1051,9 @@ cascade:
 		index = slot = timer_jiffies & TVN_MASK;
 		do {
 			list_for_each_entry(nte, varp->vec + slot, entry) {
+				if (tbase_get_deferrable(nte->base))
+					continue;
+
 				found = 1;
 				if (time_before(nte->expires, expires))
 					expires = nte->expires;
@@ -1306,7 +1344,7 @@ signed long __sched schedule_timeout(signed long timeout)
 	expire = timeout + jiffies;
 
 	setup_timer_on_stack(&timer, process_timeout, (unsigned long)current);
-	__mod_timer(&timer, expire, false);
+	__mod_timer(&timer, expire, false, TIMER_NOT_PINNED);
 	schedule();
 	del_singleshot_timer_sync(&timer);
 
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index e04b76cc238..f6693969287 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -203,7 +203,8 @@ static void start_stack_timer(void *unused)
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hrtimer->function = stack_trace_timer_fn;
 
-	hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
+	hrtimer_start(hrtimer, ns_to_ktime(sample_period),
+		      HRTIMER_MODE_REL_PINNED);
 }
 
 static void start_stack_timers(void)
diff --git a/lib/Kconfig b/lib/Kconfig
index 9960be04cbb..bb1326d3839 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -194,4 +194,10 @@ config DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
 config NLATTR
 	bool
 
+#
+# Generic 64-bit atomic support is selected if needed
+#
+config GENERIC_ATOMIC64
+       bool
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index 1f6edefebff..8e9bcf9d326 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -93,6 +93,10 @@ obj-$(CONFIG_NLATTR) += nlattr.o
 
 obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
 
+obj-$(CONFIG_GENERIC_CSUM) += checksum.o
+
+obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/atomic64.c b/lib/atomic64.c
new file mode 100644
index 00000000000..c5e72556241
--- /dev/null
+++ b/lib/atomic64.c
@@ -0,0 +1,175 @@
+/*
+ * Generic implementation of 64-bit atomics using spinlocks,
+ * useful on processors that don't have 64-bit atomic instructions.
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+/*
+ * We use a hashed array of spinlocks to provide exclusive access
+ * to each atomic64_t variable.  Since this is expected to used on
+ * systems with small numbers of CPUs (<= 4 or so), we use a
+ * relatively small array of 16 spinlocks to avoid wasting too much
+ * memory on the spinlock array.
+ */
+#define NR_LOCKS	16
+
+/*
+ * Ensure each lock is in a separate cacheline.
+ */
+static union {
+	spinlock_t lock;
+	char pad[L1_CACHE_BYTES];
+} atomic64_lock[NR_LOCKS] __cacheline_aligned_in_smp;
+
+static inline spinlock_t *lock_addr(const atomic64_t *v)
+{
+	unsigned long addr = (unsigned long) v;
+
+	addr >>= L1_CACHE_SHIFT;
+	addr ^= (addr >> 8) ^ (addr >> 16);
+	return &atomic64_lock[addr & (NR_LOCKS - 1)].lock;
+}
+
+long long atomic64_read(const atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+void atomic64_set(atomic64_t *v, long long i)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+
+	spin_lock_irqsave(lock, flags);
+	v->counter = i;
+	spin_unlock_irqrestore(lock, flags);
+}
+
+void atomic64_add(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+
+	spin_lock_irqsave(lock, flags);
+	v->counter += a;
+	spin_unlock_irqrestore(lock, flags);
+}
+
+long long atomic64_add_return(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter += a;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+void atomic64_sub(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+
+	spin_lock_irqsave(lock, flags);
+	v->counter -= a;
+	spin_unlock_irqrestore(lock, flags);
+}
+
+long long atomic64_sub_return(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter -= a;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter - 1;
+	if (val >= 0)
+		v->counter = val;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter;
+	if (val == o)
+		v->counter = n;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+long long atomic64_xchg(atomic64_t *v, long long new)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter;
+	v->counter = new;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	int ret = 1;
+
+	spin_lock_irqsave(lock, flags);
+	if (v->counter != u) {
+		v->counter += a;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(lock, flags);
+	return ret;
+}
+
+static int init_atomic64_lock(void)
+{
+	int i;
+
+	for (i = 0; i < NR_LOCKS; ++i)
+		spin_lock_init(&atomic64_lock[i].lock);
+	return 0;
+}
+
+pure_initcall(init_atomic64_lock);
diff --git a/lib/checksum.c b/lib/checksum.c
new file mode 100644
index 00000000000..12e5a1c91cd
--- /dev/null
+++ b/lib/checksum.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Tom May, <ftom@netcom.com>
+ *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ *		Lots of code moved from tcp.c and ip.c; see those files
+ *		for more names.
+ *
+ * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
+ *		Fixed some nasty bugs, causing some horrible crashes.
+ *		A: At some points, the sum (%0) was used as
+ *		length-counter instead of the length counter
+ *		(%1). Thanks to Roman Hodek for pointing this out.
+ *		B: GCC seems to mess up if one uses too many
+ *		data-registers to hold input values and one tries to
+ *		specify d0 and d1 as scratch registers. Letting gcc
+ *		choose these registers itself solves the problem.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
+ kills, so most of the assembly has to go. */
+
+#include <linux/module.h>
+#include <net/checksum.h>
+
+#include <asm/byteorder.h>
+
+static inline unsigned short from32to16(unsigned long x)
+{
+	/* add up 16-bit and 16-bit for 16+c bit */
+	x = (x & 0xffff) + (x >> 16);
+	/* add up carry.. */
+	x = (x & 0xffff) + (x >> 16);
+	return x;
+}
+
+static unsigned int do_csum(const unsigned char *buff, int len)
+{
+	int odd, count;
+	unsigned long result = 0;
+
+	if (len <= 0)
+		goto out;
+	odd = 1 & (unsigned long) buff;
+	if (odd) {
+		result = *buff;
+		len--;
+		buff++;
+	}
+	count = len >> 1;		/* nr of 16-bit words.. */
+	if (count) {
+		if (2 & (unsigned long) buff) {
+			result += *(unsigned short *) buff;
+			count--;
+			len -= 2;
+			buff += 2;
+		}
+		count >>= 1;		/* nr of 32-bit words.. */
+		if (count) {
+			unsigned long carry = 0;
+			do {
+				unsigned long w = *(unsigned long *) buff;
+				count--;
+				buff += 4;
+				result += carry;
+				result += w;
+				carry = (w > result);
+			} while (count);
+			result += carry;
+			result = (result & 0xffff) + (result >> 16);
+		}
+		if (len & 2) {
+			result += *(unsigned short *) buff;
+			buff += 2;
+		}
+	}
+	if (len & 1)
+		result += (*buff << 8);
+	result = from32to16(result);
+	if (odd)
+		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+out:
+	return result;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	return (__force __sum16)~do_csum(iph, ihl*4);
+}
+EXPORT_SYMBOL(ip_fast_csum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum wsum)
+{
+	unsigned int sum = (__force unsigned int)wsum;
+	unsigned int result = do_csum(buff, len);
+
+	/* add in old sum, and carry.. */
+	result += sum;
+	if (sum > result)
+		result += 1;
+	return (__force __wsum)result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+	return (__force __sum16)~do_csum(buff, len);
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+						__wsum sum, int *csum_err)
+{
+	int missing;
+
+	missing = __copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*csum_err = -EFAULT;
+	} else
+		*csum_err = 0;
+
+	return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
+{
+	memcpy(dst, src, len);
+	return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
+
+#ifndef csum_tcpudp_nofold
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+			unsigned short len,
+			unsigned short proto,
+			__wsum sum)
+{
+	unsigned long long s = (__force u32)sum;
+
+	s += (__force u32)saddr;
+	s += (__force u32)daddr;
+#ifdef __BIG_ENDIAN
+	s += proto + len;
+#else
+	s += (proto + len) << 8;
+#endif
+	s += (s >> 32);
+	return (__force __wsum)s;
+}
+EXPORT_SYMBOL(csum_tcpudp_nofold);
+#endif
diff --git a/lib/extable.c b/lib/extable.c
index 179c0874559..4cac81ec225 100644
--- a/lib/extable.c
+++ b/lib/extable.c
@@ -39,7 +39,26 @@ void sort_extable(struct exception_table_entry *start,
 	sort(start, finish - start, sizeof(struct exception_table_entry),
 	     cmp_ex, NULL);
 }
-#endif
+
+#ifdef CONFIG_MODULES
+/*
+ * If the exception table is sorted, any referring to the module init
+ * will be at the beginning or the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries && within_module_init(m->extable[0].insn, m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+		within_module_init(m->extable[m->num_exentries-1].insn, m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+#endif /* !ARCH_HAS_SORT_EXTABLE */
 
 #ifndef ARCH_HAS_SEARCH_EXTABLE
 /*
diff --git a/mm/Kconfig b/mm/Kconfig
index 71830ba7b98..6f4610a9ce5 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -128,11 +128,11 @@ config SPARSEMEM_VMEMMAP
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
-	depends on HOTPLUG && !HIBERNATION && ARCH_ENABLE_MEMORY_HOTPLUG
+	depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
 	depends on (IA64 || X86 || PPC64 || SUPERH || S390)
 
 comment "Memory hotplug is currently incompatible with Software Suspend"
-	depends on SPARSEMEM && HOTPLUG && HIBERNATION
+	depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
 
 config MEMORY_HOTPLUG_SPARSE
 	def_bool y
diff --git a/mm/bounce.c b/mm/bounce.c
index 4ebe3ea8379..a2b76a588e3 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/hash.h>
 #include <linux/highmem.h>
-#include <linux/blktrace_api.h>
 #include <asm/tlbflush.h>
 
 #include <trace/events/block.h>
diff --git a/mm/highmem.c b/mm/highmem.c
index 68eb1d9b63f..25878cc49da 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -26,7 +26,6 @@
 #include <linux/init.h>
 #include <linux/hash.h>
 #include <linux/highmem.h>
-#include <linux/blktrace_api.h>
 #include <asm/tlbflush.h>
 
 /*
diff --git a/mm/maccess.c b/mm/maccess.c
index ac40796cfb1..9073695ff25 100644
--- a/mm/maccess.c
+++ b/mm/maccess.c
@@ -39,7 +39,7 @@ EXPORT_SYMBOL_GPL(probe_kernel_read);
  * Safely write to address @dst from the buffer at @src.  If a kernel fault
  * happens, handle that and return -EFAULT.
  */
-long probe_kernel_write(void *dst, void *src, size_t size)
+long notrace __weak probe_kernel_write(void *dst, void *src, size_t size)
 {
 	long ret;
 	mm_segment_t old_fs = get_fs();
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 3dd4a909a1d..11a8a10a390 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -47,8 +47,6 @@ static int __init alloc_node_page_cgroup(int nid)
 	struct page_cgroup *base, *pc;
 	unsigned long table_size;
 	unsigned long start_pfn, nr_pages, index;
-	struct page *page;
-	unsigned int order;
 
 	start_pfn = NODE_DATA(nid)->node_start_pfn;
 	nr_pages = NODE_DATA(nid)->node_spanned_pages;
@@ -57,13 +55,11 @@ static int __init alloc_node_page_cgroup(int nid)
 		return 0;
 
 	table_size = sizeof(struct page_cgroup) * nr_pages;
-	order = get_order(table_size);
-	page = alloc_pages_node(nid, GFP_NOWAIT | __GFP_ZERO, order);
-	if (!page)
-		page = alloc_pages_node(-1, GFP_NOWAIT | __GFP_ZERO, order);
-	if (!page)
+
+	base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+			table_size, PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+	if (!base)
 		return -ENOMEM;
-	base = page_address(page);
 	for (index = 0; index < nr_pages; index++) {
 		pc = base + index;
 		__init_page_cgroup(pc, start_pfn + index);
@@ -73,7 +69,7 @@ static int __init alloc_node_page_cgroup(int nid)
 	return 0;
 }
 
-void __init page_cgroup_init(void)
+void __init page_cgroup_init_flatmem(void)
 {
 
 	int nid, fail;
@@ -117,16 +113,11 @@ static int __init_refok init_section_page_cgroup(unsigned long pfn)
 	if (!section->page_cgroup) {
 		nid = page_to_nid(pfn_to_page(pfn));
 		table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
-		if (slab_is_available()) {
-			base = kmalloc_node(table_size,
-					GFP_KERNEL | __GFP_NOWARN, nid);
-			if (!base)
-				base = vmalloc_node(table_size, nid);
-		} else {
-			base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
-				table_size,
-				PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-		}
+		VM_BUG_ON(!slab_is_available());
+		base = kmalloc_node(table_size,
+				GFP_KERNEL | __GFP_NOWARN, nid);
+		if (!base)
+			base = vmalloc_node(table_size, nid);
 	} else {
 		/*
  		 * We don't have to allocate page_cgroup again, but
diff --git a/mm/slab.c b/mm/slab.c
index f46b65d124e..18e3164de09 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -304,6 +304,12 @@ struct kmem_list3 {
 };
 
 /*
+ * The slab allocator is initialized with interrupts disabled. Therefore, make
+ * sure early boot allocations don't accidentally enable interrupts.
+ */
+static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
+
+/*
  * Need this for bootstrapping a per node allocator.
  */
 #define NUM_INIT_LISTS (3 * MAX_NUMNODES)
@@ -753,6 +759,7 @@ static enum {
 	NONE,
 	PARTIAL_AC,
 	PARTIAL_L3,
+	EARLY,
 	FULL
 } g_cpucache_up;
 
@@ -761,7 +768,7 @@ static enum {
  */
 int slab_is_available(void)
 {
-	return g_cpucache_up == FULL;
+	return g_cpucache_up >= EARLY;
 }
 
 static DEFINE_PER_CPU(struct delayed_work, reap_work);
@@ -1625,19 +1632,27 @@ void __init kmem_cache_init(void)
 		}
 	}
 
-	/* 6) resize the head arrays to their final sizes */
-	{
-		struct kmem_cache *cachep;
-		mutex_lock(&cache_chain_mutex);
-		list_for_each_entry(cachep, &cache_chain, next)
-			if (enable_cpucache(cachep, GFP_NOWAIT))
-				BUG();
-		mutex_unlock(&cache_chain_mutex);
-	}
+	g_cpucache_up = EARLY;
 
 	/* Annotate slab for lockdep -- annotate the malloc caches */
 	init_lock_keys();
+}
+
+void __init kmem_cache_init_late(void)
+{
+	struct kmem_cache *cachep;
+
+	/*
+	 * Interrupts are enabled now so all GFP allocations are safe.
+	 */
+	slab_gfp_mask = __GFP_BITS_MASK;
 
+	/* 6) resize the head arrays to their final sizes */
+	mutex_lock(&cache_chain_mutex);
+	list_for_each_entry(cachep, &cache_chain, next)
+		if (enable_cpucache(cachep, GFP_NOWAIT))
+			BUG();
+	mutex_unlock(&cache_chain_mutex);
 
 	/* Done! */
 	g_cpucache_up = FULL;
@@ -2102,7 +2117,7 @@ static int __init_refok setup_cpu_cache(struct kmem_cache *cachep, gfp_t gfp)
 			for_each_online_node(node) {
 				cachep->nodelists[node] =
 				    kmalloc_node(sizeof(struct kmem_list3),
-						GFP_KERNEL, node);
+						gfp, node);
 				BUG_ON(!cachep->nodelists[node]);
 				kmem_list3_init(cachep->nodelists[node]);
 			}
@@ -3354,6 +3369,8 @@ __cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid,
 	unsigned long save_flags;
 	void *ptr;
 
+	flags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(flags);
 
 	if (slab_should_failslab(cachep, flags))
@@ -3434,6 +3451,8 @@ __cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller)
 	unsigned long save_flags;
 	void *objp;
 
+	flags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(flags);
 
 	if (slab_should_failslab(cachep, flags))
diff --git a/mm/slub.c b/mm/slub.c
index 3964d3ce4c1..30354bfeb43 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -178,6 +178,12 @@ static enum {
 	SYSFS		/* Sysfs up */
 } slab_state = DOWN;
 
+/*
+ * The slab allocator is initialized with interrupts disabled. Therefore, make
+ * sure early boot allocations don't accidentally enable interrupts.
+ */
+static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
+
 /* A list of all slab caches on the system */
 static DECLARE_RWSEM(slub_lock);
 static LIST_HEAD(slab_caches);
@@ -1595,6 +1601,8 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,
 	unsigned long flags;
 	unsigned int objsize;
 
+	gfpflags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(gfpflags);
 	might_sleep_if(gfpflags & __GFP_WAIT);
 
@@ -3104,6 +3112,14 @@ void __init kmem_cache_init(void)
 		nr_cpu_ids, nr_node_ids);
 }
 
+void __init kmem_cache_init_late(void)
+{
+	/*
+	 * Interrupts are enabled now so all GFP allocations are safe.
+	 */
+	slab_gfp_mask = __GFP_BITS_MASK;
+}
+
 /*
  * Find a mergeable slab cache
  */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index d254306562c..95c08a8cc2b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2056,7 +2056,7 @@ unsigned long global_lru_pages(void)
 		+ global_page_state(NR_INACTIVE_FILE);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_HIBERNATION
 /*
  * Helper function for shrink_all_memory().  Tries to reclaim 'nr_pages' pages
  * from LRU lists system-wide, for given pass and priority.
@@ -2196,7 +2196,7 @@ out:
 
 	return sc.nr_reclaimed;
 }
-#endif
+#endif /* CONFIG_HIBERNATION */
 
 /* It's optimal to keep kswapds on the same CPUs as their memory, but
    not required for correctness.  So if the last cpu in a node goes
diff --git a/net/802/fddi.c b/net/802/fddi.c
index 539e6064e6d..3ef0ab0a543 100644
--- a/net/802/fddi.c
+++ b/net/802/fddi.c
@@ -185,10 +185,6 @@ static const struct header_ops fddi_header_ops = {
 static void fddi_setup(struct net_device *dev)
 {
 	dev->header_ops		= &fddi_header_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu		= fddi_change_mtu,
-#endif
-
 	dev->type		= ARPHRD_FDDI;
 	dev->hard_header_len	= FDDI_K_SNAP_HLEN+3;	/* Assume 802.2 SNAP hdr len + 3 pad bytes */
 	dev->mtu		= FDDI_K_SNAP_DLEN;	/* Assume max payload of 802.2 SNAP frame */
diff --git a/net/802/hippi.c b/net/802/hippi.c
index 313b9ebf92e..cd3e8e92952 100644
--- a/net/802/hippi.c
+++ b/net/802/hippi.c
@@ -193,11 +193,6 @@ static const struct header_ops hippi_header_ops = {
 
 static void hippi_setup(struct net_device *dev)
 {
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu			= hippi_change_mtu;
-	dev->set_mac_address 		= hippi_mac_addr;
-	dev->neigh_setup 		= hippi_neigh_setup_dev;
-#endif
 	dev->header_ops			= &hippi_header_ops;
 
 	/*
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index d1e10546eb8..fe649081fbd 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -378,13 +378,13 @@ static void vlan_sync_address(struct net_device *dev,
 	 * the new address */
 	if (compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
 	    !compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
-		dev_unicast_delete(dev, vlandev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(dev, vlandev->dev_addr);
 
 	/* vlan address was equal to the old address and is different from
 	 * the new address */
 	if (!compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
 	    compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
-		dev_unicast_add(dev, vlandev->dev_addr, ETH_ALEN);
+		dev_unicast_add(dev, vlandev->dev_addr);
 
 	memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
 }
@@ -758,7 +758,7 @@ static void __exit vlan_cleanup_module(void)
 		BUG_ON(!hlist_empty(&vlan_group_hash[i]));
 
 	unregister_pernet_gen_device(vlan_net_id, &vlan_net_ops);
-	synchronize_net();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
 	vlan_gvrp_uninit();
 }
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index c67fe6f7565..7f7de1a04de 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -114,9 +114,9 @@ int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 EXPORT_SYMBOL(vlan_gro_receive);
 
 int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-		   unsigned int vlan_tci, struct napi_gro_fraginfo *info)
+		   unsigned int vlan_tci)
 {
-	struct sk_buff *skb = napi_fraginfo_skb(napi, info);
+	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
 		return NET_RX_DROP;
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b4b9068e55a..96bad8f233e 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -290,7 +290,7 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 
 static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
 
 	/* Handle non-VLAN frames if they are sent to us, for example by DHCP.
@@ -309,7 +309,7 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
 		skb = __vlan_put_tag(skb, vlan_tci);
 		if (!skb) {
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			return NETDEV_TX_OK;
 		}
 
@@ -317,8 +317,8 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			vlan_dev_info(dev)->cnt_inc_headroom_on_tx++;
 	}
 
-	stats->tx_packets++;
-	stats->tx_bytes += skb->len;
+	txq->tx_packets++;
+	txq->tx_bytes += skb->len;
 
 	skb->dev = vlan_dev_info(dev)->real_dev;
 	dev_queue_xmit(skb);
@@ -328,15 +328,15 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 static int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
 					    struct net_device *dev)
 {
-	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	u16 vlan_tci;
 
 	vlan_tci = vlan_dev_info(dev)->vlan_id;
 	vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
 	skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
 
-	stats->tx_packets++;
-	stats->tx_bytes += skb->len;
+	txq->tx_packets++;
+	txq->tx_bytes += skb->len;
 
 	skb->dev = vlan_dev_info(dev)->real_dev;
 	dev_queue_xmit(skb);
@@ -441,7 +441,7 @@ static int vlan_dev_open(struct net_device *dev)
 		return -ENETDOWN;
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) {
-		err = dev_unicast_add(real_dev, dev->dev_addr, ETH_ALEN);
+		err = dev_unicast_add(real_dev, dev->dev_addr);
 		if (err < 0)
 			goto out;
 	}
@@ -470,7 +470,7 @@ clear_allmulti:
 		dev_set_allmulti(real_dev, -1);
 del_unicast:
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
-		dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(real_dev, dev->dev_addr);
 out:
 	netif_carrier_off(dev);
 	return err;
@@ -492,7 +492,7 @@ static int vlan_dev_stop(struct net_device *dev)
 		dev_set_promiscuity(real_dev, -1);
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
-		dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len);
+		dev_unicast_delete(real_dev, dev->dev_addr);
 
 	netif_carrier_off(dev);
 	return 0;
@@ -511,13 +511,13 @@ static int vlan_dev_set_mac_address(struct net_device *dev, void *p)
 		goto out;
 
 	if (compare_ether_addr(addr->sa_data, real_dev->dev_addr)) {
-		err = dev_unicast_add(real_dev, addr->sa_data, ETH_ALEN);
+		err = dev_unicast_add(real_dev, addr->sa_data);
 		if (err < 0)
 			return err;
 	}
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
-		dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(real_dev, dev->dev_addr);
 
 out:
 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
@@ -644,7 +644,6 @@ static int vlan_dev_init(struct net_device *dev)
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
 		dev->netdev_ops         = &vlan_netdev_ops;
 	}
-	netdev_resync_ops(dev);
 
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
@@ -671,13 +670,7 @@ static int vlan_ethtool_get_settings(struct net_device *dev,
 				     struct ethtool_cmd *cmd)
 {
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	struct net_device *real_dev = vlan->real_dev;
-
-	if (!real_dev->ethtool_ops ||
-	    !real_dev->ethtool_ops->get_settings)
-		return -EOPNOTSUPP;
-
-	return real_dev->ethtool_ops->get_settings(real_dev, cmd);
+	return dev_ethtool_get_settings(vlan->real_dev, cmd);
 }
 
 static void vlan_ethtool_get_drvinfo(struct net_device *dev,
@@ -691,24 +684,13 @@ static void vlan_ethtool_get_drvinfo(struct net_device *dev,
 static u32 vlan_ethtool_get_rx_csum(struct net_device *dev)
 {
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	struct net_device *real_dev = vlan->real_dev;
-
-	if (real_dev->ethtool_ops == NULL ||
-	    real_dev->ethtool_ops->get_rx_csum == NULL)
-		return 0;
-	return real_dev->ethtool_ops->get_rx_csum(real_dev);
+	return dev_ethtool_get_rx_csum(vlan->real_dev);
 }
 
 static u32 vlan_ethtool_get_flags(struct net_device *dev)
 {
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	struct net_device *real_dev = vlan->real_dev;
-
-	if (!(real_dev->features & NETIF_F_HW_VLAN_RX) ||
-	    real_dev->ethtool_ops == NULL ||
-	    real_dev->ethtool_ops->get_flags == NULL)
-		return 0;
-	return real_dev->ethtool_ops->get_flags(real_dev);
+	return dev_ethtool_get_flags(vlan->real_dev);
 }
 
 static const struct ethtool_ops vlan_ethtool_ops = {
@@ -756,6 +738,7 @@ void vlan_setup(struct net_device *dev)
 	ether_setup(dev);
 
 	dev->priv_flags		|= IFF_802_1Q_VLAN;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 	dev->tx_queue_len	= 0;
 
 	dev->netdev_ops		= &vlan_netdev_ops;
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 3628e0a81b4..b55a091a33d 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -279,13 +279,14 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
 {
 	struct net_device *vlandev = (struct net_device *) seq->private;
 	const struct vlan_dev_info *dev_info = vlan_dev_info(vlandev);
-	struct net_device_stats *stats = &vlandev->stats;
+	const struct net_device_stats *stats;
 	static const char fmt[] = "%30s %12lu\n";
 	int i;
 
 	if (!is_vlan_dev(vlandev))
 		return 0;
 
+	stats = dev_get_stats(vlandev);
 	seq_printf(seq,
 		   "%s  VID: %d	 REORDER_HDR: %i  dev->priv_flags: %hx\n",
 		   vlandev->name, dev_info->vlan_id,
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index bb8579a141a..a49484e67e1 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -246,7 +246,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 	chan->vdev = vdev;
 
 	/* We expect one virtqueue, for requests. */
-	chan->vq = vdev->config->find_vq(vdev, 0, req_done);
+	chan->vq = virtio_find_single_vq(vdev, req_done, "requests");
 	if (IS_ERR(chan->vq)) {
 		err = PTR_ERR(chan->vq);
 		goto out_free_vq;
@@ -261,7 +261,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 	return 0;
 
 out_free_vq:
-	vdev->config->del_vq(chan->vq);
+	vdev->config->del_vqs(vdev);
 fail:
 	mutex_lock(&virtio_9p_lock);
 	chan_index--;
@@ -332,7 +332,7 @@ static void p9_virtio_remove(struct virtio_device *vdev)
 	BUG_ON(chan->inuse);
 
 	if (chan->initialized) {
-		vdev->config->del_vq(chan->vq);
+		vdev->config->del_vqs(vdev);
 		chan->initialized = false;
 	}
 }
diff --git a/net/Kconfig b/net/Kconfig
index c19f549c8e7..7051b971067 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -179,6 +179,7 @@ source "net/lapb/Kconfig"
 source "net/econet/Kconfig"
 source "net/wanrouter/Kconfig"
 source "net/phonet/Kconfig"
+source "net/ieee802154/Kconfig"
 source "net/sched/Kconfig"
 source "net/dcb/Kconfig"
 
diff --git a/net/Makefile b/net/Makefile
index 9e00a55a901..ba324aefda7 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_NET_9P)		+= 9p/
 ifneq ($(CONFIG_DCB),)
 obj-y				+= dcb/
 endif
+obj-y				+= ieee802154/
 
 ifeq ($(CONFIG_NET),y)
 obj-$(CONFIG_SYSCTL)		+= sysctl_net.o
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index d6a9243641a..b603cbacdc5 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -939,6 +939,7 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 				   int len, unsigned long sum)
 {
 	int start = skb_headlen(skb);
+	struct sk_buff *frag_iter;
 	int i, copy;
 
 	/* checksum stuff in header space */
@@ -977,26 +978,22 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-			WARN_ON(start > offset + len);
+		WARN_ON(start > offset + len);
 
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				sum = atalk_sum_skb(list, offset - start,
-						    copy, sum);
-				if ((len -= copy) == 0)
-					return sum;
-				offset += copy;
-			}
-			start = end;
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			sum = atalk_sum_skb(frag_iter, offset - start,
+					    copy, sum);
+			if ((len -= copy) == 0)
+				return sum;
+			offset += copy;
 		}
+		start = end;
 	}
 
 	BUG_ON(len > 0);
diff --git a/net/appletalk/dev.c b/net/appletalk/dev.c
index 72277d70c98..6c8016f6186 100644
--- a/net/appletalk/dev.c
+++ b/net/appletalk/dev.c
@@ -9,21 +9,10 @@
 #include <linux/if_arp.h>
 #include <linux/if_ltalk.h>
 
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-static int ltalk_change_mtu(struct net_device *dev, int mtu)
-{
-	return -EINVAL;
-}
-#endif
-
 static void ltalk_setup(struct net_device *dev)
 {
 	/* Fill in the fields of the device structure with localtalk-generic values. */
 
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu		= ltalk_change_mtu;
-#endif
-
 	dev->type		= ARPHRD_LOCALTLK;
 	dev->hard_header_len 	= LTALK_HLEN;
 	dev->mtu		= LTALK_MTU;
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 3100a8940af..2912665fc58 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -228,7 +228,7 @@ static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct br2684_dev *brdev = BRPRIV(dev);
 	struct br2684_vcc *brvcc;
 
-	pr_debug("br2684_start_xmit, skb->dst=%p\n", skb->dst);
+	pr_debug("br2684_start_xmit, skb_dst(skb)=%p\n", skb_dst(skb));
 	read_lock(&devs_lock);
 	brvcc = pick_outgoing_vcc(skb, brdev);
 	if (brvcc == NULL) {
@@ -445,9 +445,10 @@ free_skb:
  */
 static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
 {
+	struct sk_buff_head queue;
 	int err;
 	struct br2684_vcc *brvcc;
-	struct sk_buff *skb;
+	struct sk_buff *skb, *tmp;
 	struct sk_buff_head *rq;
 	struct br2684_dev *brdev;
 	struct net_device *net_dev;
@@ -505,29 +506,20 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
 	barrier();
 	atmvcc->push = br2684_push;
 
+	__skb_queue_head_init(&queue);
 	rq = &sk_atm(atmvcc)->sk_receive_queue;
 
 	spin_lock_irqsave(&rq->lock, flags);
-	if (skb_queue_empty(rq)) {
-		skb = NULL;
-	} else {
-		/* NULL terminate the list.  */
-		rq->prev->next = NULL;
-		skb = rq->next;
-	}
-	rq->prev = rq->next = (struct sk_buff *)rq;
-	rq->qlen = 0;
+	skb_queue_splice_init(rq, &queue);
 	spin_unlock_irqrestore(&rq->lock, flags);
 
-	while (skb) {
-		struct sk_buff *next = skb->next;
+	skb_queue_walk_safe(&queue, skb, tmp) {
+		struct net_device *dev = skb->dev;
 
-		skb->next = skb->prev = NULL;
-		br2684_push(atmvcc, skb);
-		skb->dev->stats.rx_bytes -= skb->len;
-		skb->dev->stats.rx_packets--;
+		dev->stats.rx_bytes -= skb->len;
+		dev->stats.rx_packets--;
 
-		skb = next;
+		br2684_push(atmvcc, skb);
 	}
 	__module_get(THIS_MODULE);
 	return 0;
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 3dc0a3a42a5..e65a3b1477f 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -369,16 +369,16 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
 	pr_debug("clip_start_xmit (skb %p)\n", skb);
-	if (!skb->dst) {
-		printk(KERN_ERR "clip_start_xmit: skb->dst == NULL\n");
+	if (!skb_dst(skb)) {
+		printk(KERN_ERR "clip_start_xmit: skb_dst(skb) == NULL\n");
 		dev_kfree_skb(skb);
 		dev->stats.tx_dropped++;
 		return 0;
 	}
-	if (!skb->dst->neighbour) {
+	if (!skb_dst(skb)->neighbour) {
 #if 0
-		skb->dst->neighbour = clip_find_neighbour(skb->dst, 1);
-		if (!skb->dst->neighbour) {
+		skb_dst(skb)->neighbour = clip_find_neighbour(skb_dst(skb), 1);
+		if (!skb_dst(skb)->neighbour) {
 			dev_kfree_skb(skb);	/* lost that one */
 			dev->stats.tx_dropped++;
 			return 0;
@@ -389,7 +389,7 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->stats.tx_dropped++;
 		return 0;
 	}
-	entry = NEIGH2ENTRY(skb->dst->neighbour);
+	entry = NEIGH2ENTRY(skb_dst(skb)->neighbour);
 	if (!entry->vccs) {
 		if (time_after(jiffies, entry->expires)) {
 			/* should be resolved */
@@ -406,7 +406,7 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 	pr_debug("neigh %p, vccs %p\n", entry, entry->vccs);
 	ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc;
-	pr_debug("using neighbour %p, vcc %p\n", skb->dst->neighbour, vcc);
+	pr_debug("using neighbour %p, vcc %p\n", skb_dst(skb)->neighbour, vcc);
 	if (entry->vccs->encap) {
 		void *here;
 
@@ -445,9 +445,9 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 static int clip_mkip(struct atm_vcc *vcc, int timeout)
 {
+	struct sk_buff_head *rq, queue;
 	struct clip_vcc *clip_vcc;
-	struct sk_buff *skb;
-	struct sk_buff_head *rq;
+	struct sk_buff *skb, *tmp;
 	unsigned long flags;
 
 	if (!vcc->push)
@@ -469,39 +469,28 @@ static int clip_mkip(struct atm_vcc *vcc, int timeout)
 	vcc->push = clip_push;
 	vcc->pop = clip_pop;
 
+	__skb_queue_head_init(&queue);
 	rq = &sk_atm(vcc)->sk_receive_queue;
 
 	spin_lock_irqsave(&rq->lock, flags);
-	if (skb_queue_empty(rq)) {
-		skb = NULL;
-	} else {
-		/* NULL terminate the list.  */
-		rq->prev->next = NULL;
-		skb = rq->next;
-	}
-	rq->prev = rq->next = (struct sk_buff *)rq;
-	rq->qlen = 0;
+	skb_queue_splice_init(rq, &queue);
 	spin_unlock_irqrestore(&rq->lock, flags);
 
 	/* re-process everything received between connection setup and MKIP */
-	while (skb) {
-		struct sk_buff *next = skb->next;
-
-		skb->next = skb->prev = NULL;
+	skb_queue_walk_safe(&queue, skb, tmp) {
 		if (!clip_devs) {
 			atm_return(vcc, skb->truesize);
 			kfree_skb(skb);
 		} else {
+			struct net_device *dev = skb->dev;
 			unsigned int len = skb->len;
 
 			skb_get(skb);
 			clip_push(vcc, skb);
-			skb->dev->stats.rx_packets--;
-			skb->dev->stats.rx_bytes -= len;
+			dev->stats.rx_packets--;
+			dev->stats.rx_bytes -= len;
 			kfree_skb(skb);
 		}
-
-		skb = next;
 	}
 	return 0;
 }
@@ -568,6 +557,7 @@ static void clip_setup(struct net_device *dev)
 	/* without any more elaborate queuing. 100 is a reasonable */
 	/* compromise between decent burst-tolerance and protection */
 	/* against memory hogs. */
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 }
 
 static int clip_create(int number)
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 199b6bb79f4..ff2e594dca9 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -34,7 +34,6 @@
 
 /* Proxy LEC knows about bridging */
 #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-#include <linux/if_bridge.h>
 #include "../bridge/br_private.h"
 
 static unsigned char bridge_ula_lec[] = { 0x01, 0x80, 0xc2, 0x00, 0x00 };
@@ -271,7 +270,8 @@ static int lec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk("%s:No lecd attached\n", dev->name);
 		dev->stats.tx_errors++;
 		netif_stop_queue(dev);
-		return -EUNATCH;
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
 	}
 
 	pr_debug("skbuff head:%lx data:%lx tail:%lx end:%lx\n",
@@ -518,18 +518,14 @@ static int lec_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 	case l_should_bridge:
 #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
 		{
-			struct net_bridge_fdb_entry *f;
-
 			pr_debug("%s: bridge zeppelin asks about %pM\n",
 				 dev->name, mesg->content.proxy.mac_addr);
 
-			if (br_fdb_get_hook == NULL || dev->br_port == NULL)
+			if (br_fdb_test_addr_hook == NULL)
 				break;
 
-			f = br_fdb_get_hook(dev->br_port->br,
-					    mesg->content.proxy.mac_addr);
-			if (f != NULL && f->dst->dev != dev
-			    && f->dst->state == BR_STATE_FORWARDING) {
+			if (br_fdb_test_addr_hook(dev,
+					mesg->content.proxy.mac_addr)) {
 				/* hit from bridge table, send LE_ARP_RESPONSE */
 				struct sk_buff *skb2;
 				struct sock *sk;
@@ -540,10 +536,8 @@ static int lec_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 				skb2 =
 				    alloc_skb(sizeof(struct atmlec_msg),
 					      GFP_ATOMIC);
-				if (skb2 == NULL) {
-					br_fdb_put_hook(f);
+				if (skb2 == NULL)
 					break;
-				}
 				skb2->len = sizeof(struct atmlec_msg);
 				skb_copy_to_linear_data(skb2, mesg,
 							sizeof(*mesg));
@@ -552,8 +546,6 @@ static int lec_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 				skb_queue_tail(&sk->sk_receive_queue, skb2);
 				sk->sk_data_ready(sk, skb2->len);
 			}
-			if (f != NULL)
-				br_fdb_put_hook(f);
 		}
 #endif /* defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE) */
 		break;
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 7725da95a76..59fdb1d2e8e 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -3,8 +3,9 @@
 #
 
 menuconfig BT
-	depends on NET && !S390
 	tristate "Bluetooth subsystem support"
+	depends on NET && !S390
+	depends on RFKILL || !RFKILL
 	help
 	  Bluetooth is low-cost, low-power, short-range wireless technology.
 	  It was designed as a replacement for cables and other short-range
diff --git a/net/bluetooth/cmtp/capi.c b/net/bluetooth/cmtp/capi.c
index 78958c0f9a4..97f8d68d574 100644
--- a/net/bluetooth/cmtp/capi.c
+++ b/net/bluetooth/cmtp/capi.c
@@ -382,7 +382,7 @@ static void cmtp_reset_ctr(struct capi_ctr *ctrl)
 
 	BT_DBG("ctrl %p", ctrl);
 
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 
 	atomic_inc(&session->terminate);
 	cmtp_schedule(session);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cd061510b6b..406ad07cdea 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -39,6 +39,7 @@
 #include <linux/skbuff.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
+#include <linux/rfkill.h>
 #include <net/sock.h>
 
 #include <asm/system.h>
@@ -476,6 +477,11 @@ int hci_dev_open(__u16 dev)
 
 	hci_req_lock(hdev);
 
+	if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) {
+		ret = -ERFKILL;
+		goto done;
+	}
+
 	if (test_bit(HCI_UP, &hdev->flags)) {
 		ret = -EALREADY;
 		goto done;
@@ -813,6 +819,24 @@ int hci_get_dev_info(void __user *arg)
 
 /* ---- Interface to HCI drivers ---- */
 
+static int hci_rfkill_set_block(void *data, bool blocked)
+{
+	struct hci_dev *hdev = data;
+
+	BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked);
+
+	if (!blocked)
+		return 0;
+
+	hci_dev_do_close(hdev);
+
+	return 0;
+}
+
+static const struct rfkill_ops hci_rfkill_ops = {
+	.set_block = hci_rfkill_set_block,
+};
+
 /* Alloc HCI device */
 struct hci_dev *hci_alloc_dev(void)
 {
@@ -844,7 +868,8 @@ int hci_register_dev(struct hci_dev *hdev)
 	struct list_head *head = &hci_dev_list, *p;
 	int i, id = 0;
 
-	BT_DBG("%p name %s type %d owner %p", hdev, hdev->name, hdev->type, hdev->owner);
+	BT_DBG("%p name %s type %d owner %p", hdev, hdev->name,
+						hdev->type, hdev->owner);
 
 	if (!hdev->open || !hdev->close || !hdev->destruct)
 		return -EINVAL;
@@ -900,6 +925,15 @@ int hci_register_dev(struct hci_dev *hdev)
 
 	hci_register_sysfs(hdev);
 
+	hdev->rfkill = rfkill_alloc(hdev->name, &hdev->dev,
+				RFKILL_TYPE_BLUETOOTH, &hci_rfkill_ops, hdev);
+	if (hdev->rfkill) {
+		if (rfkill_register(hdev->rfkill) < 0) {
+			rfkill_destroy(hdev->rfkill);
+			hdev->rfkill = NULL;
+		}
+	}
+
 	hci_notify(hdev, HCI_DEV_REG);
 
 	return id;
@@ -924,6 +958,11 @@ int hci_unregister_dev(struct hci_dev *hdev)
 
 	hci_notify(hdev, HCI_DEV_UNREG);
 
+	if (hdev->rfkill) {
+		rfkill_unregister(hdev->rfkill);
+		rfkill_destroy(hdev->rfkill);
+	}
+
 	hci_unregister_sysfs(hdev);
 
 	__hci_dev_put(hdev);
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index ca4d3b40d5c..bd0a4c1bced 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -40,10 +40,10 @@
 #include <linux/skbuff.h>
 #include <linux/list.h>
 #include <linux/device.h>
+#include <linux/uaccess.h>
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -52,7 +52,7 @@
 
 #define VERSION "2.13"
 
-static u32 l2cap_feat_mask = 0x0080;
+static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
 static u8 l2cap_fixed_chan[8] = { 0x02, };
 
 static const struct proto_ops l2cap_sock_ops;
@@ -134,7 +134,8 @@ static inline struct sock *l2cap_get_chan_by_scid(struct l2cap_chan_list *l, u16
 	struct sock *s;
 	read_lock(&l->lock);
 	s = __l2cap_get_chan_by_scid(l, cid);
-	if (s) bh_lock_sock(s);
+	if (s)
+		bh_lock_sock(s);
 	read_unlock(&l->lock);
 	return s;
 }
@@ -154,17 +155,18 @@ static inline struct sock *l2cap_get_chan_by_ident(struct l2cap_chan_list *l, u8
 	struct sock *s;
 	read_lock(&l->lock);
 	s = __l2cap_get_chan_by_ident(l, ident);
-	if (s) bh_lock_sock(s);
+	if (s)
+		bh_lock_sock(s);
 	read_unlock(&l->lock);
 	return s;
 }
 
 static u16 l2cap_alloc_cid(struct l2cap_chan_list *l)
 {
-	u16 cid = 0x0040;
+	u16 cid = L2CAP_CID_DYN_START;
 
-	for (; cid < 0xffff; cid++) {
-		if(!__l2cap_get_chan_by_scid(l, cid))
+	for (; cid < L2CAP_CID_DYN_END; cid++) {
+		if (!__l2cap_get_chan_by_scid(l, cid))
 			return cid;
 	}
 
@@ -204,7 +206,8 @@ static void __l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct so
 {
 	struct l2cap_chan_list *l = &conn->chan_list;
 
-	BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn, l2cap_pi(sk)->psm, l2cap_pi(sk)->dcid);
+	BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn,
+			l2cap_pi(sk)->psm, l2cap_pi(sk)->dcid);
 
 	conn->disc_reason = 0x13;
 
@@ -215,13 +218,13 @@ static void __l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct so
 		l2cap_pi(sk)->scid = l2cap_alloc_cid(l);
 	} else if (sk->sk_type == SOCK_DGRAM) {
 		/* Connectionless socket */
-		l2cap_pi(sk)->scid = 0x0002;
-		l2cap_pi(sk)->dcid = 0x0002;
+		l2cap_pi(sk)->scid = L2CAP_CID_CONN_LESS;
+		l2cap_pi(sk)->dcid = L2CAP_CID_CONN_LESS;
 		l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
 	} else {
 		/* Raw socket can send/recv signalling messages only */
-		l2cap_pi(sk)->scid = 0x0001;
-		l2cap_pi(sk)->dcid = 0x0001;
+		l2cap_pi(sk)->scid = L2CAP_CID_SIGNALING;
+		l2cap_pi(sk)->dcid = L2CAP_CID_SIGNALING;
 		l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
 	}
 
@@ -272,7 +275,7 @@ static inline int l2cap_check_security(struct sock *sk)
 		if (l2cap_pi(sk)->sec_level == BT_SECURITY_HIGH)
 			auth_type = HCI_AT_NO_BONDING_MITM;
 		else
-                        auth_type = HCI_AT_NO_BONDING;
+			auth_type = HCI_AT_NO_BONDING;
 
 		if (l2cap_pi(sk)->sec_level == BT_SECURITY_LOW)
 			l2cap_pi(sk)->sec_level = BT_SECURITY_SDP;
@@ -588,7 +591,8 @@ static inline struct sock *l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t
 	struct sock *s;
 	read_lock(&l2cap_sk_list.lock);
 	s = __l2cap_get_sock_by_psm(state, psm, src);
-	if (s) bh_lock_sock(s);
+	if (s)
+		bh_lock_sock(s);
 	read_unlock(&l2cap_sk_list.lock);
 	return s;
 }
@@ -808,7 +812,7 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 		goto done;
 	}
 
-	if (la.l2_psm && btohs(la.l2_psm) < 0x1001 &&
+	if (la.l2_psm && __le16_to_cpu(la.l2_psm) < 0x1001 &&
 				!capable(CAP_NET_BIND_SERVICE)) {
 		err = -EACCES;
 		goto done;
@@ -825,7 +829,8 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 		l2cap_pi(sk)->sport = la.l2_psm;
 		sk->sk_state = BT_BOUND;
 
-		if (btohs(la.l2_psm) == 0x0001 || btohs(la.l2_psm) == 0x0003)
+		if (__le16_to_cpu(la.l2_psm) == 0x0001 ||
+					__le16_to_cpu(la.l2_psm) == 0x0003)
 			l2cap_pi(sk)->sec_level = BT_SECURITY_SDP;
 	}
 
@@ -844,12 +849,13 @@ static int l2cap_do_connect(struct sock *sk)
 	struct hci_conn *hcon;
 	struct hci_dev *hdev;
 	__u8 auth_type;
-	int err = 0;
+	int err;
 
 	BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst),
 							l2cap_pi(sk)->psm);
 
-	if (!(hdev = hci_get_route(dst, src)))
+	hdev = hci_get_route(dst, src);
+	if (!hdev)
 		return -EHOSTUNREACH;
 
 	hci_dev_lock_bh(hdev);
@@ -950,7 +956,7 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int al
 		goto done;
 	}
 
-	switch(sk->sk_state) {
+	switch (sk->sk_state) {
 	case BT_CONNECT:
 	case BT_CONNECT2:
 	case BT_CONFIG:
@@ -975,7 +981,8 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int al
 	bacpy(&bt_sk(sk)->dst, &la.l2_bdaddr);
 	l2cap_pi(sk)->psm = la.l2_psm;
 
-	if ((err = l2cap_do_connect(sk)))
+	err = l2cap_do_connect(sk);
+	if (err)
 		goto done;
 
 wait:
@@ -1009,9 +1016,9 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
 		write_lock_bh(&l2cap_sk_list.lock);
 
 		for (psm = 0x1001; psm < 0x1100; psm += 2)
-			if (!__l2cap_get_sock_by_addr(htobs(psm), src)) {
-				l2cap_pi(sk)->psm   = htobs(psm);
-				l2cap_pi(sk)->sport = htobs(psm);
+			if (!__l2cap_get_sock_by_addr(cpu_to_le16(psm), src)) {
+				l2cap_pi(sk)->psm   = cpu_to_le16(psm);
+				l2cap_pi(sk)->sport = cpu_to_le16(psm);
 				err = 0;
 				break;
 			}
@@ -1100,11 +1107,11 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l
 	if (peer) {
 		la->l2_psm = l2cap_pi(sk)->psm;
 		bacpy(&la->l2_bdaddr, &bt_sk(sk)->dst);
-		la->l2_cid = htobs(l2cap_pi(sk)->dcid);
+		la->l2_cid = cpu_to_le16(l2cap_pi(sk)->dcid);
 	} else {
 		la->l2_psm = l2cap_pi(sk)->sport;
 		bacpy(&la->l2_bdaddr, &bt_sk(sk)->src);
-		la->l2_cid = htobs(l2cap_pi(sk)->scid);
+		la->l2_cid = cpu_to_le16(l2cap_pi(sk)->scid);
 	}
 
 	return 0;
@@ -1114,7 +1121,7 @@ static inline int l2cap_do_send(struct sock *sk, struct msghdr *msg, int len)
 {
 	struct l2cap_conn *conn = l2cap_pi(sk)->conn;
 	struct sk_buff *skb, **frag;
-	int err, hlen, count, sent=0;
+	int err, hlen, count, sent = 0;
 	struct l2cap_hdr *lh;
 
 	BT_DBG("sk %p len %d", sk, len);
@@ -1167,8 +1174,8 @@ static inline int l2cap_do_send(struct sock *sk, struct msghdr *msg, int len)
 
 		frag = &(*frag)->next;
 	}
-
-	if ((err = hci_send_acl(conn->hcon, skb, 0)) < 0)
+	err = hci_send_acl(conn->hcon, skb, 0);
+	if (err < 0)
 		goto fail;
 
 	return sent;
@@ -1556,7 +1563,7 @@ static void l2cap_raw_recv(struct l2cap_conn *conn, struct sk_buff *skb)
 {
 	struct l2cap_chan_list *l = &conn->chan_list;
 	struct sk_buff *nskb;
-	struct sock * sk;
+	struct sock *sk;
 
 	BT_DBG("conn %p", conn);
 
@@ -1568,8 +1575,8 @@ static void l2cap_raw_recv(struct l2cap_conn *conn, struct sk_buff *skb)
 		/* Don't send frame to the socket it came from */
 		if (skb->sk == sk)
 			continue;
-
-		if (!(nskb = skb_clone(skb, GFP_ATOMIC)))
+		nskb = skb_clone(skb, GFP_ATOMIC);
+		if (!nskb)
 			continue;
 
 		if (sock_queue_rcv_skb(sk, nskb))
@@ -1587,7 +1594,8 @@ static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
 	struct l2cap_hdr *lh;
 	int len, count;
 
-	BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %d", conn, code, ident, dlen);
+	BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %d",
+			conn, code, ident, dlen);
 
 	len = L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE + dlen;
 	count = min_t(unsigned int, conn->mtu, len);
@@ -1598,7 +1606,7 @@ static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
 
 	lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
 	lh->len = cpu_to_le16(L2CAP_CMD_HDR_SIZE + dlen);
-	lh->cid = cpu_to_le16(0x0001);
+	lh->cid = cpu_to_le16(L2CAP_CID_SIGNALING);
 
 	cmd = (struct l2cap_cmd_hdr *) skb_put(skb, L2CAP_CMD_HDR_SIZE);
 	cmd->code  = code;
@@ -1739,8 +1747,8 @@ static int l2cap_parse_conf_req(struct sock *sk, void *data)
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
 
-		hint  = type & 0x80;
-		type &= 0x7f;
+		hint  = type & L2CAP_CONF_HINT;
+		type &= L2CAP_CONF_MASK;
 
 		switch (type) {
 		case L2CAP_CONF_MTU:
@@ -1966,10 +1974,12 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
 	BT_DBG("dcid 0x%4.4x scid 0x%4.4x result 0x%2.2x status 0x%2.2x", dcid, scid, result, status);
 
 	if (scid) {
-		if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, scid)))
+		sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
+		if (!sk)
 			return 0;
 	} else {
-		if (!(sk = l2cap_get_chan_by_ident(&conn->chan_list, cmd->ident)))
+		sk = l2cap_get_chan_by_ident(&conn->chan_list, cmd->ident);
+		if (!sk)
 			return 0;
 	}
 
@@ -2012,7 +2022,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 
 	BT_DBG("dcid 0x%4.4x flags 0x%2.2x", dcid, flags);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid);
+	if (!sk)
 		return -ENOENT;
 
 	if (sk->sk_state == BT_DISCONN)
@@ -2079,9 +2090,11 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 	flags  = __le16_to_cpu(rsp->flags);
 	result = __le16_to_cpu(rsp->result);
 
-	BT_DBG("scid 0x%4.4x flags 0x%2.2x result 0x%2.2x", scid, flags, result);
+	BT_DBG("scid 0x%4.4x flags 0x%2.2x result 0x%2.2x",
+			scid, flags, result);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, scid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
+	if (!sk)
 		return 0;
 
 	switch (result) {
@@ -2142,7 +2155,8 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd
 
 	BT_DBG("scid 0x%4.4x dcid 0x%4.4x", scid, dcid);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid);
+	if (!sk)
 		return 0;
 
 	rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
@@ -2169,7 +2183,8 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd
 
 	BT_DBG("dcid 0x%4.4x scid 0x%4.4x", dcid, scid);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, scid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
+	if (!sk)
 		return 0;
 
 	l2cap_chan_del(sk, 0);
@@ -2230,7 +2245,7 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm
 	if (type == L2CAP_IT_FEAT_MASK) {
 		conn->feat_mask = get_unaligned_le32(rsp->data);
 
-		if (conn->feat_mask & 0x0080) {
+		if (conn->feat_mask & L2CAP_FEAT_FIXED_CHAN) {
 			struct l2cap_info_req req;
 			req.type = cpu_to_le16(L2CAP_IT_FIXED_CHAN);
 
@@ -2403,7 +2418,8 @@ drop:
 	kfree_skb(skb);
 
 done:
-	if (sk) bh_unlock_sock(sk);
+	if (sk)
+		bh_unlock_sock(sk);
 	return 0;
 }
 
@@ -2420,11 +2436,11 @@ static void l2cap_recv_frame(struct l2cap_conn *conn, struct sk_buff *skb)
 	BT_DBG("len %d, cid 0x%4.4x", len, cid);
 
 	switch (cid) {
-	case 0x0001:
+	case L2CAP_CID_SIGNALING:
 		l2cap_sig_channel(conn, skb);
 		break;
 
-	case 0x0002:
+	case L2CAP_CID_CONN_LESS:
 		psm = get_unaligned((__le16 *) skb->data);
 		skb_pull(skb, 2);
 		l2cap_conless_channel(conn, psm, skb);
@@ -2650,7 +2666,8 @@ static int l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 fl
 		}
 
 		/* Allocate skb for the complete frame (with header) */
-		if (!(conn->rx_skb = bt_skb_alloc(len, GFP_ATOMIC)))
+		conn->rx_skb = bt_skb_alloc(len, GFP_ATOMIC);
+		if (!conn->rx_skb)
 			goto drop;
 
 		skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len),
@@ -2704,13 +2721,13 @@ static ssize_t l2cap_sysfs_show(struct class *dev, char *buf)
 
 		str += sprintf(str, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d %d\n",
 				batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
-				sk->sk_state, btohs(pi->psm), pi->scid, pi->dcid,
-				pi->imtu, pi->omtu, pi->sec_level);
+				sk->sk_state, __le16_to_cpu(pi->psm), pi->scid,
+				pi->dcid, pi->imtu, pi->omtu, pi->sec_level);
 	}
 
 	read_unlock_bh(&l2cap_sk_list.lock);
 
-	return (str - buf);
+	return str - buf;
 }
 
 static CLASS_ATTR(l2cap, S_IRUGO, l2cap_sysfs_show, NULL);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 374536e050a..e50566ebf9f 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -679,7 +679,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst
 
 	bacpy(&addr.l2_bdaddr, dst);
 	addr.l2_family = AF_BLUETOOTH;
-	addr.l2_psm    = htobs(RFCOMM_PSM);
+	addr.l2_psm    = cpu_to_le16(RFCOMM_PSM);
 	addr.l2_cid    = 0;
 	*err = kernel_connect(sock, (struct sockaddr *) &addr, sizeof(addr), O_NONBLOCK);
 	if (*err == 0 || *err == -EINPROGRESS)
@@ -852,9 +852,9 @@ static int rfcomm_send_pn(struct rfcomm_session *s, int cr, struct rfcomm_dlc *d
 	}
 
 	if (cr && channel_mtu >= 0)
-		pn->mtu = htobs(channel_mtu);
+		pn->mtu = cpu_to_le16(channel_mtu);
 	else
-		pn->mtu = htobs(d->mtu);
+		pn->mtu = cpu_to_le16(d->mtu);
 
 	*ptr = __fcs(buf); ptr++;
 
@@ -1056,7 +1056,7 @@ static void rfcomm_make_uih(struct sk_buff *skb, u8 addr)
 
 	if (len > 127) {
 		hdr = (void *) skb_push(skb, 4);
-		put_unaligned(htobs(__len16(len)), (__le16 *) &hdr->len);
+		put_unaligned(cpu_to_le16(__len16(len)), (__le16 *) &hdr->len);
 	} else {
 		hdr = (void *) skb_push(skb, 3);
 		hdr->len = __len8(len);
@@ -1289,7 +1289,7 @@ static int rfcomm_apply_pn(struct rfcomm_dlc *d, int cr, struct rfcomm_pn *pn)
 
 	d->priority = pn->priority;
 
-	d->mtu = btohs(pn->mtu);
+	d->mtu = __le16_to_cpu(pn->mtu);
 
 	if (cr && d->mtu > s->mtu)
 		d->mtu = s->mtu;
@@ -1922,7 +1922,7 @@ static int rfcomm_add_listener(bdaddr_t *ba)
 	/* Bind socket */
 	bacpy(&addr.l2_bdaddr, ba);
 	addr.l2_family = AF_BLUETOOTH;
-	addr.l2_psm    = htobs(RFCOMM_PSM);
+	addr.l2_psm    = cpu_to_le16(RFCOMM_PSM);
 	addr.l2_cid    = 0;
 	err = kernel_bind(sock, (struct sockaddr *) &addr, sizeof(addr));
 	if (err < 0) {
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 4d2c1f1cb52..9aac5213105 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -65,8 +65,9 @@ static int __init br_init(void)
 	brioctl_set(br_ioctl_deviceless_stub);
 	br_handle_frame_hook = br_handle_frame;
 
-	br_fdb_get_hook = br_fdb_get;
-	br_fdb_put_hook = br_fdb_put;
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+	br_fdb_test_addr_hook = br_fdb_test_addr;
+#endif
 
 	return 0;
 err_out4:
@@ -95,8 +96,9 @@ static void __exit br_deinit(void)
 	synchronize_net();
 
 	br_netfilter_fini();
-	br_fdb_get_hook = NULL;
-	br_fdb_put_hook = NULL;
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+	br_fdb_test_addr_hook = NULL;
+#endif
 
 	br_handle_frame_hook = NULL;
 	br_fdb_fini();
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index a48f5efdb6b..57bf05c353b 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -71,10 +71,17 @@ static inline int br_mac_hash(const unsigned char *mac)
 	return jhash_1word(key, fdb_salt) & (BR_HASH_SIZE - 1);
 }
 
+static void fdb_rcu_free(struct rcu_head *head)
+{
+	struct net_bridge_fdb_entry *ent
+		= container_of(head, struct net_bridge_fdb_entry, rcu);
+	kmem_cache_free(br_fdb_cache, ent);
+}
+
 static inline void fdb_delete(struct net_bridge_fdb_entry *f)
 {
 	hlist_del_rcu(&f->hlist);
-	br_fdb_put(f);
+	call_rcu(&f->rcu, fdb_rcu_free);
 }
 
 void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
@@ -226,33 +233,26 @@ struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
 	return NULL;
 }
 
-/* Interface used by ATM hook that keeps a ref count */
-struct net_bridge_fdb_entry *br_fdb_get(struct net_bridge *br,
-					unsigned char *addr)
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+/* Interface used by ATM LANE hook to test
+ * if an addr is on some other bridge port */
+int br_fdb_test_addr(struct net_device *dev, unsigned char *addr)
 {
 	struct net_bridge_fdb_entry *fdb;
+	int ret;
+
+	if (!dev->br_port)
+		return 0;
 
 	rcu_read_lock();
-	fdb = __br_fdb_get(br, addr);
-	if (fdb && !atomic_inc_not_zero(&fdb->use_count))
-		fdb = NULL;
+	fdb = __br_fdb_get(dev->br_port->br, addr);
+	ret = fdb && fdb->dst->dev != dev &&
+		fdb->dst->state == BR_STATE_FORWARDING;
 	rcu_read_unlock();
-	return fdb;
-}
-
-static void fdb_rcu_free(struct rcu_head *head)
-{
-	struct net_bridge_fdb_entry *ent
-		= container_of(head, struct net_bridge_fdb_entry, rcu);
-	kmem_cache_free(br_fdb_cache, ent);
-}
 
-/* Set entry up for deletion with RCU  */
-void br_fdb_put(struct net_bridge_fdb_entry *ent)
-{
-	if (atomic_dec_and_test(&ent->use_count))
-		call_rcu(&ent->rcu, fdb_rcu_free);
+	return ret;
 }
+#endif /* CONFIG_ATM_LANE */
 
 /*
  * Fill buffer with forwarding table records in
@@ -326,7 +326,6 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head,
 	fdb = kmem_cache_alloc(br_fdb_cache, GFP_ATOMIC);
 	if (fdb) {
 		memcpy(fdb->addr.addr, addr, ETH_ALEN);
-		atomic_set(&fdb->use_count, 1);
 		hlist_add_head_rcu(&fdb->hlist, head);
 
 		fdb->dst = source;
@@ -398,7 +397,7 @@ void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
 		if (unlikely(fdb->is_local)) {
 			if (net_ratelimit())
 				printk(KERN_WARNING "%s: received packet with "
-				       " own address as source address\n",
+				       "own address as source address\n",
 				       source->dev->name);
 		} else {
 			/* fastpath: update of existing entry */
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index e4a418fcb35..d22f611e400 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -228,6 +228,7 @@ int nf_bridge_copy_header(struct sk_buff *skb)
 static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
 {
 	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
+	struct rtable *rt;
 
 	if (nf_bridge->mask & BRNF_PKT_TYPE) {
 		skb->pkt_type = PACKET_OTHERHOST;
@@ -235,12 +236,13 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
 	}
 	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 
-	skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
-	if (!skb->rtable) {
+	rt = bridge_parent_rtable(nf_bridge->physindev);
+	if (!rt) {
 		kfree_skb(skb);
 		return 0;
 	}
-	dst_hold(&skb->rtable->u.dst);
+	dst_hold(&rt->u.dst);
+	skb_dst_set(skb, &rt->u.dst);
 
 	skb->dev = nf_bridge->physindev;
 	nf_bridge_push_encap_header(skb);
@@ -320,7 +322,7 @@ static int br_nf_pre_routing_finish_bridge(struct sk_buff *skb)
 
 	skb->dev = bridge_parent(skb->dev);
 	if (skb->dev) {
-		struct dst_entry *dst = skb->dst;
+		struct dst_entry *dst = skb_dst(skb);
 
 		nf_bridge_pull_encap_header(skb);
 
@@ -338,6 +340,7 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 	struct net_device *dev = skb->dev;
 	struct iphdr *iph = ip_hdr(skb);
 	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
+	struct rtable *rt;
 	int err;
 
 	if (nf_bridge->mask & BRNF_PKT_TYPE) {
@@ -347,7 +350,6 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 	if (dnat_took_place(skb)) {
 		if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) {
-			struct rtable *rt;
 			struct flowi fl = {
 				.nl_u = {
 					.ip4_u = {
@@ -373,7 +375,7 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 				/* - Bridged-and-DNAT'ed traffic doesn't
 				 *   require ip_forwarding. */
 				if (((struct dst_entry *)rt)->dev == dev) {
-					skb->dst = (struct dst_entry *)rt;
+					skb_dst_set(skb, (struct dst_entry *)rt);
 					goto bridged_dnat;
 				}
 				/* we are sure that forwarding is disabled, so printing
@@ -387,7 +389,7 @@ free_skb:
 			kfree_skb(skb);
 			return 0;
 		} else {
-			if (skb->dst->dev == dev) {
+			if (skb_dst(skb)->dev == dev) {
 bridged_dnat:
 				/* Tell br_nf_local_out this is a
 				 * bridged frame */
@@ -404,12 +406,13 @@ bridged_dnat:
 			skb->pkt_type = PACKET_HOST;
 		}
 	} else {
-		skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
-		if (!skb->rtable) {
+		rt = bridge_parent_rtable(nf_bridge->physindev);
+		if (!rt) {
 			kfree_skb(skb);
 			return 0;
 		}
-		dst_hold(&skb->rtable->u.dst);
+		dst_hold(&rt->u.dst);
+		skb_dst_set(skb, &rt->u.dst);
 	}
 
 	skb->dev = nf_bridge->physindev;
@@ -628,10 +631,10 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb,
 				   const struct net_device *out,
 				   int (*okfn)(struct sk_buff *))
 {
-	if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) {
-		dst_release(&skb->rtable->u.dst);
-		skb->rtable = NULL;
-	}
+	struct rtable *rt = skb_rtable(skb);
+
+	if (rt && rt == bridge_parent_rtable(in))
+		skb_dst_drop(skb);
 
 	return NF_ACCEPT;
 }
@@ -846,7 +849,7 @@ static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb,
 		return NF_ACCEPT;
 
 #ifdef CONFIG_NETFILTER_DEBUG
-	if (skb->dst == NULL) {
+	if (skb_dst(skb) == NULL) {
 		printk(KERN_INFO "br_netfilter post_routing: skb->dst == NULL\n");
 		goto print_error;
 	}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index b6c3b71974d..d5b5537272b 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -51,7 +51,6 @@ struct net_bridge_fdb_entry
 	struct net_bridge_port		*dst;
 
 	struct rcu_head			rcu;
-	atomic_t			use_count;
 	unsigned long			ageing_timer;
 	mac_addr			addr;
 	unsigned char			is_local;
@@ -154,9 +153,7 @@ extern void br_fdb_delete_by_port(struct net_bridge *br,
 				  const struct net_bridge_port *p, int do_all);
 extern struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
 						 const unsigned char *addr);
-extern struct net_bridge_fdb_entry *br_fdb_get(struct net_bridge *br,
-					       unsigned char *addr);
-extern void br_fdb_put(struct net_bridge_fdb_entry *ent);
+extern int br_fdb_test_addr(struct net_device *dev, unsigned char *addr);
 extern int br_fdb_fillbuf(struct net_bridge *br, void *buf,
 			  unsigned long count, unsigned long off);
 extern int br_fdb_insert(struct net_bridge *br,
@@ -242,10 +239,9 @@ extern void br_stp_port_timer_init(struct net_bridge_port *p);
 extern unsigned long br_timer_value(const struct timer_list *timer);
 
 /* br.c */
-extern struct net_bridge_fdb_entry *(*br_fdb_get_hook)(struct net_bridge *br,
-						       unsigned char *addr);
-extern void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent);
-
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+extern int (*br_fdb_test_addr_hook)(struct net_device *dev, unsigned char *addr);
+#endif
 
 /* br_netlink.c */
 extern int br_netlink_init(void);
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 603d89248e7..ee4820aa184 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -172,7 +172,8 @@ static ssize_t store_stp_state(struct device *d,
 	if (endp == buf)
 		return -EINVAL;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	br_stp_set_enabled(br, val);
 	rtnl_unlock();
 
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index 02b2d50cce4..4a3cdf8f381 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -189,7 +189,8 @@ static ssize_t brport_store(struct kobject * kobj,
 
 	val = simple_strtoul(buf, &endp, 0);
 	if (endp != buf) {
-		rtnl_lock();
+		if (!rtnl_trylock())
+			return restart_syscall();
 		if (p->dev && p->br && brport_attr->store) {
 			spin_lock_bh(&p->br->lock);
 			ret = brport_attr->store(p, val);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 820252aee81..37928d5f284 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -142,6 +142,12 @@ static inline int ebt_basic_match(struct ebt_entry *e, struct ethhdr *h,
 	return 0;
 }
 
+static inline __pure
+struct ebt_entry *ebt_next_entry(const struct ebt_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 /* Do some firewalling */
 unsigned int ebt_do_table (unsigned int hook, struct sk_buff *skb,
    const struct net_device *in, const struct net_device *out,
@@ -164,7 +170,7 @@ unsigned int ebt_do_table (unsigned int hook, struct sk_buff *skb,
 	mtpar.in      = tgpar.in  = in;
 	mtpar.out     = tgpar.out = out;
 	mtpar.hotdrop = &hotdrop;
-	tgpar.hooknum = hook;
+	mtpar.hooknum = tgpar.hooknum = hook;
 
 	read_lock_bh(&table->lock);
 	private = table->private;
@@ -249,8 +255,7 @@ letsreturn:
 		/* jump to a udc */
 		cs[sp].n = i + 1;
 		cs[sp].chaininfo = chaininfo;
-		cs[sp].e = (struct ebt_entry *)
-		   (((char *)point) + point->next_offset);
+		cs[sp].e = ebt_next_entry(point);
 		i = 0;
 		chaininfo = (struct ebt_entries *) (base + verdict);
 #ifdef CONFIG_NETFILTER_DEBUG
@@ -266,8 +271,7 @@ letsreturn:
 		sp++;
 		continue;
 letscontinue:
-		point = (struct ebt_entry *)
-		   (((char *)point) + point->next_offset);
+		point = ebt_next_entry(point);
 		i++;
 	}
 
@@ -787,7 +791,7 @@ static int check_chainloops(struct ebt_entries *chain, struct ebt_cl_stack *cl_s
 			/* this can't be 0, so the loop test is correct */
 			cl_s[i].cs.n = pos + 1;
 			pos = 0;
-			cl_s[i].cs.e = ((void *)e + e->next_offset);
+			cl_s[i].cs.e = ebt_next_entry(e);
 			e = (struct ebt_entry *)(hlp2->data);
 			nentries = hlp2->nentries;
 			cl_s[i].from = chain_nr;
@@ -797,7 +801,7 @@ static int check_chainloops(struct ebt_entries *chain, struct ebt_cl_stack *cl_s
 			continue;
 		}
 letscontinue:
-		e = (void *)e + e->next_offset;
+		e = ebt_next_entry(e);
 		pos++;
 	}
 	return 0;
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 10f0528c3bf..e733725b11d 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -903,6 +903,8 @@ static __exit void can_exit(void)
 	}
 	spin_unlock(&can_rcvlists_lock);
 
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
 	kmem_cache_destroy(rcv_cache);
 }
 
diff --git a/net/core/datagram.c b/net/core/datagram.c
index b01a76abe1d..58abee1f1df 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -260,7 +260,9 @@ int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags)
 		spin_unlock_bh(&sk->sk_receive_queue.lock);
 	}
 
-	skb_free_datagram(sk, skb);
+	kfree_skb(skb);
+	sk_mem_reclaim_partial(sk);
+
 	return err;
 }
 
@@ -280,6 +282,7 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 
 	/* Copy header. */
 	if (copy > 0) {
@@ -320,28 +323,24 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_copy_datagram_iovec(list,
-							    offset - start,
-							    to, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_datagram_iovec(frag_iter,
+						    offset - start,
+						    to, copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -351,30 +350,124 @@ fault:
 }
 
 /**
+ *	skb_copy_datagram_const_iovec - Copy a datagram to an iovec.
+ *	@skb: buffer to copy
+ *	@offset: offset in the buffer to start copying from
+ *	@to: io vector to copy to
+ *	@to_offset: offset in the io vector to start copying to
+ *	@len: amount of data to copy from buffer to iovec
+ *
+ *	Returns 0 or -EFAULT.
+ *	Note: the iovec is not modified during the copy.
+ */
+int skb_copy_datagram_const_iovec(const struct sk_buff *skb, int offset,
+				  const struct iovec *to, int to_offset,
+				  int len)
+{
+	int start = skb_headlen(skb);
+	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
+
+	/* Copy header. */
+	if (copy > 0) {
+		if (copy > len)
+			copy = len;
+		if (memcpy_toiovecend(to, skb->data + offset, to_offset, copy))
+			goto fault;
+		if ((len -= copy) == 0)
+			return 0;
+		offset += copy;
+		to_offset += copy;
+	}
+
+	/* Copy paged appendix. Hmm... why does this look so complicated? */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + skb_shinfo(skb)->frags[i].size;
+		if ((copy = end - offset) > 0) {
+			int err;
+			u8  *vaddr;
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			struct page *page = frag->page;
+
+			if (copy > len)
+				copy = len;
+			vaddr = kmap(page);
+			err = memcpy_toiovecend(to, vaddr + frag->page_offset +
+						offset - start, to_offset, copy);
+			kunmap(page);
+			if (err)
+				goto fault;
+			if (!(len -= copy))
+				return 0;
+			offset += copy;
+			to_offset += copy;
+		}
+		start = end;
+	}
+
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_datagram_const_iovec(frag_iter,
+							  offset - start,
+							  to, to_offset,
+							  copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			to_offset += copy;
+		}
+		start = end;
+	}
+	if (!len)
+		return 0;
+
+fault:
+	return -EFAULT;
+}
+EXPORT_SYMBOL(skb_copy_datagram_const_iovec);
+
+/**
  *	skb_copy_datagram_from_iovec - Copy a datagram from an iovec.
  *	@skb: buffer to copy
  *	@offset: offset in the buffer to start copying to
  *	@from: io vector to copy to
+ *	@from_offset: offset in the io vector to start copying from
  *	@len: amount of data to copy to buffer from iovec
  *
  *	Returns 0 or -EFAULT.
- *	Note: the iovec is modified during the copy.
+ *	Note: the iovec is not modified during the copy.
  */
 int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
-				 struct iovec *from, int len)
+				 const struct iovec *from, int from_offset,
+				 int len)
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 
 	/* Copy header. */
 	if (copy > 0) {
 		if (copy > len)
 			copy = len;
-		if (memcpy_fromiovec(skb->data + offset, from, copy))
+		if (memcpy_fromiovecend(skb->data + offset, from, from_offset,
+					copy))
 			goto fault;
 		if ((len -= copy) == 0)
 			return 0;
 		offset += copy;
+		from_offset += copy;
 	}
 
 	/* Copy paged appendix. Hmm... why does this look so complicated? */
@@ -393,8 +486,9 @@ int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
 			if (copy > len)
 				copy = len;
 			vaddr = kmap(page);
-			err = memcpy_fromiovec(vaddr + frag->page_offset +
-					       offset - start, from, copy);
+			err = memcpy_fromiovecend(vaddr + frag->page_offset +
+						  offset - start,
+						  from, from_offset, copy);
 			kunmap(page);
 			if (err)
 				goto fault;
@@ -402,32 +496,32 @@ int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
 			if (!(len -= copy))
 				return 0;
 			offset += copy;
+			from_offset += copy;
 		}
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_copy_datagram_from_iovec(list,
-								 offset - start,
-								 from, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_datagram_from_iovec(frag_iter,
+							 offset - start,
+							 from,
+							 from_offset,
+							 copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			from_offset += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -442,8 +536,9 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 				      __wsum *csump)
 {
 	int start = skb_headlen(skb);
-	int pos = 0;
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
+	int pos = 0;
 
 	/* Copy header. */
 	if (copy > 0) {
@@ -494,33 +589,29 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list=list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				__wsum csum2 = 0;
-				if (copy > len)
-					copy = len;
-				if (skb_copy_and_csum_datagram(list,
-							       offset - start,
-							       to, copy,
-							       &csum2))
-					goto fault;
-				*csump = csum_block_add(*csump, csum2, pos);
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-				to += copy;
-				pos += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			__wsum csum2 = 0;
+			if (copy > len)
+				copy = len;
+			if (skb_copy_and_csum_datagram(frag_iter,
+						       offset - start,
+						       to, copy,
+						       &csum2))
+				goto fault;
+			*csump = csum_block_add(*csump, csum2, pos);
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			to += copy;
+			pos += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
diff --git a/net/core/dev.c b/net/core/dev.c
index e2e9e4af3ac..576a61574a9 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -126,6 +126,7 @@
 #include <linux/in.h>
 #include <linux/jhash.h>
 #include <linux/random.h>
+#include <trace/events/napi.h>
 
 #include "net-sysfs.h"
 
@@ -268,7 +269,8 @@ static const unsigned short netdev_lock_type[] =
 	 ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL,
 	 ARPHRD_FCFABRIC, ARPHRD_IEEE802_TR, ARPHRD_IEEE80211,
 	 ARPHRD_IEEE80211_PRISM, ARPHRD_IEEE80211_RADIOTAP, ARPHRD_PHONET,
-	 ARPHRD_PHONET_PIPE, ARPHRD_VOID, ARPHRD_NONE};
+	 ARPHRD_PHONET_PIPE, ARPHRD_IEEE802154, ARPHRD_IEEE802154_PHY,
+	 ARPHRD_VOID, ARPHRD_NONE};
 
 static const char *netdev_lock_name[] =
 	{"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25",
@@ -285,7 +287,8 @@ static const char *netdev_lock_name[] =
 	 "_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL",
 	 "_xmit_FCFABRIC", "_xmit_IEEE802_TR", "_xmit_IEEE80211",
 	 "_xmit_IEEE80211_PRISM", "_xmit_IEEE80211_RADIOTAP", "_xmit_PHONET",
-	 "_xmit_PHONET_PIPE", "_xmit_VOID", "_xmit_NONE"};
+	 "_xmit_PHONET_PIPE", "_xmit_IEEE802154", "_xmit_IEEE802154_PHY",
+	 "_xmit_VOID", "_xmit_NONE"};
 
 static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)];
 static struct lock_class_key netdev_addr_lock_key[ARRAY_SIZE(netdev_lock_type)];
@@ -1047,7 +1050,7 @@ void dev_load(struct net *net, const char *name)
 int dev_open(struct net_device *dev)
 {
 	const struct net_device_ops *ops = dev->netdev_ops;
-	int ret = 0;
+	int ret;
 
 	ASSERT_RTNL();
 
@@ -1064,6 +1067,11 @@ int dev_open(struct net_device *dev)
 	if (!netif_device_present(dev))
 		return -ENODEV;
 
+	ret = call_netdevice_notifiers(NETDEV_PRE_UP, dev);
+	ret = notifier_to_errno(ret);
+	if (ret)
+		return ret;
+
 	/*
 	 *	Call device private open method
 	 */
@@ -1688,7 +1696,16 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 				goto gso;
 		}
 
+		/*
+		 * If device doesnt need skb->dst, release it right now while
+		 * its hot in this cpu cache
+		 */
+		if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
+			skb_dst_drop(skb);
+
 		rc = ops->ndo_start_xmit(skb, dev);
+		if (rc == 0)
+			txq_trans_update(txq);
 		/*
 		 * TODO: if skb_orphan() was called by
 		 * dev->hard_start_xmit() (for example, the unmodified
@@ -1718,6 +1735,7 @@ gso:
 			skb->next = nskb;
 			return rc;
 		}
+		txq_trans_update(txq);
 		if (unlikely(netif_tx_queue_stopped(txq) && skb->next))
 			return NETDEV_TX_BUSY;
 	} while (skb->next);
@@ -1735,8 +1753,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb)
 {
 	u32 hash;
 
-	if (skb_rx_queue_recorded(skb))
-		return skb_get_rx_queue(skb) % dev->real_num_tx_queues;
+	if (skb_rx_queue_recorded(skb)) {
+		hash = skb_get_rx_queue(skb);
+		while (unlikely (hash >= dev->real_num_tx_queues))
+			hash -= dev->real_num_tx_queues;
+		return hash;
+	}
 
 	if (skb->sk && skb->sk->sk_hash)
 		hash = skb->sk->sk_hash;
@@ -1800,7 +1822,7 @@ int dev_queue_xmit(struct sk_buff *skb)
 	if (netif_needs_gso(dev, skb))
 		goto gso;
 
-	if (skb_shinfo(skb)->frag_list &&
+	if (skb_has_frags(skb) &&
 	    !(dev->features & NETIF_F_FRAGLIST) &&
 	    __skb_linearize(skb))
 		goto out_kfree_skb;
@@ -2049,11 +2071,13 @@ static inline int deliver_skb(struct sk_buff *skb,
 }
 
 #if defined(CONFIG_BRIDGE) || defined (CONFIG_BRIDGE_MODULE)
-/* These hooks defined here for ATM */
-struct net_bridge;
-struct net_bridge_fdb_entry *(*br_fdb_get_hook)(struct net_bridge *br,
-						unsigned char *addr);
-void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent) __read_mostly;
+
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+/* This hook is defined here for ATM LANE */
+int (*br_fdb_test_addr_hook)(struct net_device *dev,
+			     unsigned char *addr) __read_mostly;
+EXPORT_SYMBOL(br_fdb_test_addr_hook);
+#endif
 
 /*
  * If bridge module is loaded call bridging hook.
@@ -2061,6 +2085,8 @@ void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent) __read_mostly;
  */
 struct sk_buff *(*br_handle_frame_hook)(struct net_bridge_port *p,
 					struct sk_buff *skb) __read_mostly;
+EXPORT_SYMBOL(br_handle_frame_hook);
+
 static inline struct sk_buff *handle_bridge(struct sk_buff *skb,
 					    struct packet_type **pt_prev, int *ret,
 					    struct net_device *orig_dev)
@@ -2374,26 +2400,6 @@ void napi_gro_flush(struct napi_struct *napi)
 }
 EXPORT_SYMBOL(napi_gro_flush);
 
-void *skb_gro_header(struct sk_buff *skb, unsigned int hlen)
-{
-	unsigned int offset = skb_gro_offset(skb);
-
-	hlen += offset;
-	if (hlen <= skb_headlen(skb))
-		return skb->data + offset;
-
-	if (unlikely(!skb_shinfo(skb)->nr_frags ||
-		     skb_shinfo(skb)->frags[0].size <=
-		     hlen - skb_headlen(skb) ||
-		     PageHighMem(skb_shinfo(skb)->frags[0].page)))
-		return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
-
-	return page_address(skb_shinfo(skb)->frags[0].page) +
-	       skb_shinfo(skb)->frags[0].page_offset +
-	       offset - skb_headlen(skb);
-}
-EXPORT_SYMBOL(skb_gro_header);
-
 int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff **pp = NULL;
@@ -2407,7 +2413,7 @@ int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 	if (!(skb->dev->features & NETIF_F_GRO))
 		goto normal;
 
-	if (skb_is_gso(skb) || skb_shinfo(skb)->frag_list)
+	if (skb_is_gso(skb) || skb_has_frags(skb))
 		goto normal;
 
 	rcu_read_lock();
@@ -2456,10 +2462,25 @@ int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 	ret = GRO_HELD;
 
 pull:
-	if (unlikely(!pskb_may_pull(skb, skb_gro_offset(skb)))) {
-		if (napi->gro_list == skb)
-			napi->gro_list = skb->next;
-		ret = GRO_DROP;
+	if (skb_headlen(skb) < skb_gro_offset(skb)) {
+		int grow = skb_gro_offset(skb) - skb_headlen(skb);
+
+		BUG_ON(skb->end - skb->tail < grow);
+
+		memcpy(skb_tail_pointer(skb), NAPI_GRO_CB(skb)->frag0, grow);
+
+		skb->tail += grow;
+		skb->data_len -= grow;
+
+		skb_shinfo(skb)->frags[0].page_offset += grow;
+		skb_shinfo(skb)->frags[0].size -= grow;
+
+		if (unlikely(!skb_shinfo(skb)->frags[0].size)) {
+			put_page(skb_shinfo(skb)->frags[0].page);
+			memmove(skb_shinfo(skb)->frags,
+				skb_shinfo(skb)->frags + 1,
+				--skb_shinfo(skb)->nr_frags);
+		}
 	}
 
 ok:
@@ -2509,6 +2530,22 @@ int napi_skb_finish(int ret, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(napi_skb_finish);
 
+void skb_gro_reset_offset(struct sk_buff *skb)
+{
+	NAPI_GRO_CB(skb)->data_offset = 0;
+	NAPI_GRO_CB(skb)->frag0 = NULL;
+	NAPI_GRO_CB(skb)->frag0_len = 0;
+
+	if (skb->mac_header == skb->tail &&
+	    !PageHighMem(skb_shinfo(skb)->frags[0].page)) {
+		NAPI_GRO_CB(skb)->frag0 =
+			page_address(skb_shinfo(skb)->frags[0].page) +
+			skb_shinfo(skb)->frags[0].page_offset;
+		NAPI_GRO_CB(skb)->frag0_len = skb_shinfo(skb)->frags[0].size;
+	}
+}
+EXPORT_SYMBOL(skb_gro_reset_offset);
+
 int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	skb_gro_reset_offset(skb);
@@ -2526,16 +2563,10 @@ void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(napi_reuse_skb);
 
-struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi,
-				  struct napi_gro_fraginfo *info)
+struct sk_buff *napi_get_frags(struct napi_struct *napi)
 {
 	struct net_device *dev = napi->dev;
 	struct sk_buff *skb = napi->skb;
-	struct ethhdr *eth;
-	skb_frag_t *frag;
-	int i;
-
-	napi->skb = NULL;
 
 	if (!skb) {
 		skb = netdev_alloc_skb(dev, GRO_MAX_HEAD + NET_IP_ALIGN);
@@ -2543,47 +2574,14 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi,
 			goto out;
 
 		skb_reserve(skb, NET_IP_ALIGN);
-	}
 
-	BUG_ON(info->nr_frags > MAX_SKB_FRAGS);
-	frag = info->frags;
-
-	for (i = 0; i < info->nr_frags; i++) {
-		skb_fill_page_desc(skb, i, frag->page, frag->page_offset,
-				   frag->size);
-		frag++;
-	}
-	skb_shinfo(skb)->nr_frags = info->nr_frags;
-
-	skb->data_len = info->len;
-	skb->len += info->len;
-	skb->truesize += info->len;
-
-	skb_reset_mac_header(skb);
-	skb_gro_reset_offset(skb);
-
-	eth = skb_gro_header(skb, sizeof(*eth));
-	if (!eth) {
-		napi_reuse_skb(napi, skb);
-		skb = NULL;
-		goto out;
+		napi->skb = skb;
 	}
 
-	skb_gro_pull(skb, sizeof(*eth));
-
-	/*
-	 * This works because the only protocols we care about don't require
-	 * special handling.  We'll fix it up properly at the end.
-	 */
-	skb->protocol = eth->h_proto;
-
-	skb->ip_summed = info->ip_summed;
-	skb->csum = info->csum;
-
 out:
 	return skb;
 }
-EXPORT_SYMBOL(napi_fraginfo_skb);
+EXPORT_SYMBOL(napi_get_frags);
 
 int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
 {
@@ -2613,9 +2611,46 @@ int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
 }
 EXPORT_SYMBOL(napi_frags_finish);
 
-int napi_gro_frags(struct napi_struct *napi, struct napi_gro_fraginfo *info)
+struct sk_buff *napi_frags_skb(struct napi_struct *napi)
 {
-	struct sk_buff *skb = napi_fraginfo_skb(napi, info);
+	struct sk_buff *skb = napi->skb;
+	struct ethhdr *eth;
+	unsigned int hlen;
+	unsigned int off;
+
+	napi->skb = NULL;
+
+	skb_reset_mac_header(skb);
+	skb_gro_reset_offset(skb);
+
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*eth);
+	eth = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		eth = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!eth)) {
+			napi_reuse_skb(napi, skb);
+			skb = NULL;
+			goto out;
+		}
+	}
+
+	skb_gro_pull(skb, sizeof(*eth));
+
+	/*
+	 * This works because the only protocols we care about don't require
+	 * special handling.  We'll fix it up properly at the end.
+	 */
+	skb->protocol = eth->h_proto;
+
+out:
+	return skb;
+}
+EXPORT_SYMBOL(napi_frags_skb);
+
+int napi_gro_frags(struct napi_struct *napi)
+{
+	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
 		return NET_RX_DROP;
@@ -2719,7 +2754,7 @@ void netif_napi_del(struct napi_struct *napi)
 	struct sk_buff *skb, *next;
 
 	list_del_init(&napi->dev_list);
-	kfree_skb(napi->skb);
+	napi_free_frags(napi);
 
 	for (skb = napi->gro_list; skb; skb = next) {
 		next = skb->next;
@@ -2773,8 +2808,10 @@ static void net_rx_action(struct softirq_action *h)
 		 * accidently calling ->poll() when NAPI is not scheduled.
 		 */
 		work = 0;
-		if (test_bit(NAPI_STATE_SCHED, &n->state))
+		if (test_bit(NAPI_STATE_SCHED, &n->state)) {
 			work = n->poll(n, weight);
+			trace_napi_poll(n);
+		}
 
 		WARN_ON_ONCE(work > weight);
 
@@ -3444,6 +3481,319 @@ void dev_set_rx_mode(struct net_device *dev)
 	netif_addr_unlock_bh(dev);
 }
 
+/* hw addresses list handling functions */
+
+static int __hw_addr_add(struct list_head *list, int *delta,
+			 unsigned char *addr, int addr_len,
+			 unsigned char addr_type)
+{
+	struct netdev_hw_addr *ha;
+	int alloc_size;
+
+	if (addr_len > MAX_ADDR_LEN)
+		return -EINVAL;
+
+	list_for_each_entry(ha, list, list) {
+		if (!memcmp(ha->addr, addr, addr_len) &&
+		    ha->type == addr_type) {
+			ha->refcount++;
+			return 0;
+		}
+	}
+
+
+	alloc_size = sizeof(*ha);
+	if (alloc_size < L1_CACHE_BYTES)
+		alloc_size = L1_CACHE_BYTES;
+	ha = kmalloc(alloc_size, GFP_ATOMIC);
+	if (!ha)
+		return -ENOMEM;
+	memcpy(ha->addr, addr, addr_len);
+	ha->type = addr_type;
+	ha->refcount = 1;
+	ha->synced = false;
+	list_add_tail_rcu(&ha->list, list);
+	if (delta)
+		(*delta)++;
+	return 0;
+}
+
+static void ha_rcu_free(struct rcu_head *head)
+{
+	struct netdev_hw_addr *ha;
+
+	ha = container_of(head, struct netdev_hw_addr, rcu_head);
+	kfree(ha);
+}
+
+static int __hw_addr_del(struct list_head *list, int *delta,
+			 unsigned char *addr, int addr_len,
+			 unsigned char addr_type)
+{
+	struct netdev_hw_addr *ha;
+
+	list_for_each_entry(ha, list, list) {
+		if (!memcmp(ha->addr, addr, addr_len) &&
+		    (ha->type == addr_type || !addr_type)) {
+			if (--ha->refcount)
+				return 0;
+			list_del_rcu(&ha->list);
+			call_rcu(&ha->rcu_head, ha_rcu_free);
+			if (delta)
+				(*delta)--;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+static int __hw_addr_add_multiple(struct list_head *to_list, int *to_delta,
+				  struct list_head *from_list, int addr_len,
+				  unsigned char addr_type)
+{
+	int err;
+	struct netdev_hw_addr *ha, *ha2;
+	unsigned char type;
+
+	list_for_each_entry(ha, from_list, list) {
+		type = addr_type ? addr_type : ha->type;
+		err = __hw_addr_add(to_list, to_delta, ha->addr,
+				    addr_len, type);
+		if (err)
+			goto unroll;
+	}
+	return 0;
+
+unroll:
+	list_for_each_entry(ha2, from_list, list) {
+		if (ha2 == ha)
+			break;
+		type = addr_type ? addr_type : ha2->type;
+		__hw_addr_del(to_list, to_delta, ha2->addr,
+			      addr_len, type);
+	}
+	return err;
+}
+
+static void __hw_addr_del_multiple(struct list_head *to_list, int *to_delta,
+				   struct list_head *from_list, int addr_len,
+				   unsigned char addr_type)
+{
+	struct netdev_hw_addr *ha;
+	unsigned char type;
+
+	list_for_each_entry(ha, from_list, list) {
+		type = addr_type ? addr_type : ha->type;
+		__hw_addr_del(to_list, to_delta, ha->addr,
+			      addr_len, addr_type);
+	}
+}
+
+static int __hw_addr_sync(struct list_head *to_list, int *to_delta,
+			  struct list_head *from_list, int *from_delta,
+			  int addr_len)
+{
+	int err = 0;
+	struct netdev_hw_addr *ha, *tmp;
+
+	list_for_each_entry_safe(ha, tmp, from_list, list) {
+		if (!ha->synced) {
+			err = __hw_addr_add(to_list, to_delta, ha->addr,
+					    addr_len, ha->type);
+			if (err)
+				break;
+			ha->synced = true;
+			ha->refcount++;
+		} else if (ha->refcount == 1) {
+			__hw_addr_del(to_list, to_delta, ha->addr,
+				      addr_len, ha->type);
+			__hw_addr_del(from_list, from_delta, ha->addr,
+				      addr_len, ha->type);
+		}
+	}
+	return err;
+}
+
+static void __hw_addr_unsync(struct list_head *to_list, int *to_delta,
+			     struct list_head *from_list, int *from_delta,
+			     int addr_len)
+{
+	struct netdev_hw_addr *ha, *tmp;
+
+	list_for_each_entry_safe(ha, tmp, from_list, list) {
+		if (ha->synced) {
+			__hw_addr_del(to_list, to_delta, ha->addr,
+				      addr_len, ha->type);
+			ha->synced = false;
+			__hw_addr_del(from_list, from_delta, ha->addr,
+				      addr_len, ha->type);
+		}
+	}
+}
+
+
+static void __hw_addr_flush(struct list_head *list)
+{
+	struct netdev_hw_addr *ha, *tmp;
+
+	list_for_each_entry_safe(ha, tmp, list, list) {
+		list_del_rcu(&ha->list);
+		call_rcu(&ha->rcu_head, ha_rcu_free);
+	}
+}
+
+/* Device addresses handling functions */
+
+static void dev_addr_flush(struct net_device *dev)
+{
+	/* rtnl_mutex must be held here */
+
+	__hw_addr_flush(&dev->dev_addr_list);
+	dev->dev_addr = NULL;
+}
+
+static int dev_addr_init(struct net_device *dev)
+{
+	unsigned char addr[MAX_ADDR_LEN];
+	struct netdev_hw_addr *ha;
+	int err;
+
+	/* rtnl_mutex must be held here */
+
+	INIT_LIST_HEAD(&dev->dev_addr_list);
+	memset(addr, 0, sizeof(addr));
+	err = __hw_addr_add(&dev->dev_addr_list, NULL, addr, sizeof(addr),
+			    NETDEV_HW_ADDR_T_LAN);
+	if (!err) {
+		/*
+		 * Get the first (previously created) address from the list
+		 * and set dev_addr pointer to this location.
+		 */
+		ha = list_first_entry(&dev->dev_addr_list,
+				      struct netdev_hw_addr, list);
+		dev->dev_addr = ha->addr;
+	}
+	return err;
+}
+
+/**
+ *	dev_addr_add	- Add a device address
+ *	@dev: device
+ *	@addr: address to add
+ *	@addr_type: address type
+ *
+ *	Add a device address to the device or increase the reference count if
+ *	it already exists.
+ *
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_add(struct net_device *dev, unsigned char *addr,
+		 unsigned char addr_type)
+{
+	int err;
+
+	ASSERT_RTNL();
+
+	err = __hw_addr_add(&dev->dev_addr_list, NULL, addr, dev->addr_len,
+			    addr_type);
+	if (!err)
+		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+	return err;
+}
+EXPORT_SYMBOL(dev_addr_add);
+
+/**
+ *	dev_addr_del	- Release a device address.
+ *	@dev: device
+ *	@addr: address to delete
+ *	@addr_type: address type
+ *
+ *	Release reference to a device address and remove it from the device
+ *	if the reference count drops to zero.
+ *
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_del(struct net_device *dev, unsigned char *addr,
+		 unsigned char addr_type)
+{
+	int err;
+	struct netdev_hw_addr *ha;
+
+	ASSERT_RTNL();
+
+	/*
+	 * We can not remove the first address from the list because
+	 * dev->dev_addr points to that.
+	 */
+	ha = list_first_entry(&dev->dev_addr_list, struct netdev_hw_addr, list);
+	if (ha->addr == dev->dev_addr && ha->refcount == 1)
+		return -ENOENT;
+
+	err = __hw_addr_del(&dev->dev_addr_list, NULL, addr, dev->addr_len,
+			    addr_type);
+	if (!err)
+		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+	return err;
+}
+EXPORT_SYMBOL(dev_addr_del);
+
+/**
+ *	dev_addr_add_multiple	- Add device addresses from another device
+ *	@to_dev: device to which addresses will be added
+ *	@from_dev: device from which addresses will be added
+ *	@addr_type: address type - 0 means type will be used from from_dev
+ *
+ *	Add device addresses of the one device to another.
+ **
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_add_multiple(struct net_device *to_dev,
+			  struct net_device *from_dev,
+			  unsigned char addr_type)
+{
+	int err;
+
+	ASSERT_RTNL();
+
+	if (from_dev->addr_len != to_dev->addr_len)
+		return -EINVAL;
+	err = __hw_addr_add_multiple(&to_dev->dev_addr_list, NULL,
+				     &from_dev->dev_addr_list,
+				     to_dev->addr_len, addr_type);
+	if (!err)
+		call_netdevice_notifiers(NETDEV_CHANGEADDR, to_dev);
+	return err;
+}
+EXPORT_SYMBOL(dev_addr_add_multiple);
+
+/**
+ *	dev_addr_del_multiple	- Delete device addresses by another device
+ *	@to_dev: device where the addresses will be deleted
+ *	@from_dev: device by which addresses the addresses will be deleted
+ *	@addr_type: address type - 0 means type will used from from_dev
+ *
+ *	Deletes addresses in to device by the list of addresses in from device.
+ *
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_del_multiple(struct net_device *to_dev,
+			  struct net_device *from_dev,
+			  unsigned char addr_type)
+{
+	ASSERT_RTNL();
+
+	if (from_dev->addr_len != to_dev->addr_len)
+		return -EINVAL;
+	__hw_addr_del_multiple(&to_dev->dev_addr_list, NULL,
+			       &from_dev->dev_addr_list,
+			       to_dev->addr_len, addr_type);
+	call_netdevice_notifiers(NETDEV_CHANGEADDR, to_dev);
+	return 0;
+}
+EXPORT_SYMBOL(dev_addr_del_multiple);
+
+/* unicast and multicast addresses handling functions */
+
 int __dev_addr_delete(struct dev_addr_list **list, int *count,
 		      void *addr, int alen, int glbl)
 {
@@ -3506,24 +3856,22 @@ int __dev_addr_add(struct dev_addr_list **list, int *count,
  *	dev_unicast_delete	- Release secondary unicast address.
  *	@dev: device
  *	@addr: address to delete
- *	@alen: length of @addr
  *
  *	Release reference to a secondary unicast address and remove it
  *	from the device if the reference count drops to zero.
  *
  * 	The caller must hold the rtnl_mutex.
  */
-int dev_unicast_delete(struct net_device *dev, void *addr, int alen)
+int dev_unicast_delete(struct net_device *dev, void *addr)
 {
 	int err;
 
 	ASSERT_RTNL();
 
-	netif_addr_lock_bh(dev);
-	err = __dev_addr_delete(&dev->uc_list, &dev->uc_count, addr, alen, 0);
+	err = __hw_addr_del(&dev->uc_list, &dev->uc_count, addr,
+			    dev->addr_len, NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
-	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_delete);
@@ -3532,24 +3880,22 @@ EXPORT_SYMBOL(dev_unicast_delete);
  *	dev_unicast_add		- add a secondary unicast address
  *	@dev: device
  *	@addr: address to add
- *	@alen: length of @addr
  *
  *	Add a secondary unicast address to the device or increase
  *	the reference count if it already exists.
  *
  *	The caller must hold the rtnl_mutex.
  */
-int dev_unicast_add(struct net_device *dev, void *addr, int alen)
+int dev_unicast_add(struct net_device *dev, void *addr)
 {
 	int err;
 
 	ASSERT_RTNL();
 
-	netif_addr_lock_bh(dev);
-	err = __dev_addr_add(&dev->uc_list, &dev->uc_count, addr, alen, 0);
+	err = __hw_addr_add(&dev->uc_list, &dev->uc_count, addr,
+			    dev->addr_len, NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
-	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_add);
@@ -3606,8 +3952,7 @@ void __dev_addr_unsync(struct dev_addr_list **to, int *to_count,
  *	@from: source device
  *
  *	Add newly added addresses to the destination device and release
- *	addresses that have no users left. The source device must be
- *	locked by netif_tx_lock_bh.
+ *	addresses that have no users left.
  *
  *	This function is intended to be called from the dev->set_rx_mode
  *	function of layered software devices.
@@ -3616,12 +3961,15 @@ int dev_unicast_sync(struct net_device *to, struct net_device *from)
 {
 	int err = 0;
 
-	netif_addr_lock_bh(to);
-	err = __dev_addr_sync(&to->uc_list, &to->uc_count,
-			      &from->uc_list, &from->uc_count);
+	ASSERT_RTNL();
+
+	if (to->addr_len != from->addr_len)
+		return -EINVAL;
+
+	err = __hw_addr_sync(&to->uc_list, &to->uc_count,
+			     &from->uc_list, &from->uc_count, to->addr_len);
 	if (!err)
 		__dev_set_rx_mode(to);
-	netif_addr_unlock_bh(to);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_sync);
@@ -3637,18 +3985,33 @@ EXPORT_SYMBOL(dev_unicast_sync);
  */
 void dev_unicast_unsync(struct net_device *to, struct net_device *from)
 {
-	netif_addr_lock_bh(from);
-	netif_addr_lock(to);
+	ASSERT_RTNL();
 
-	__dev_addr_unsync(&to->uc_list, &to->uc_count,
-			  &from->uc_list, &from->uc_count);
-	__dev_set_rx_mode(to);
+	if (to->addr_len != from->addr_len)
+		return;
 
-	netif_addr_unlock(to);
-	netif_addr_unlock_bh(from);
+	__hw_addr_unsync(&to->uc_list, &to->uc_count,
+			 &from->uc_list, &from->uc_count, to->addr_len);
+	__dev_set_rx_mode(to);
 }
 EXPORT_SYMBOL(dev_unicast_unsync);
 
+static void dev_unicast_flush(struct net_device *dev)
+{
+	/* rtnl_mutex must be held here */
+
+	__hw_addr_flush(&dev->uc_list);
+	dev->uc_count = 0;
+}
+
+static void dev_unicast_init(struct net_device *dev)
+{
+	/* rtnl_mutex must be held here */
+
+	INIT_LIST_HEAD(&dev->uc_list);
+}
+
+
 static void __dev_addr_discard(struct dev_addr_list **list)
 {
 	struct dev_addr_list *tmp;
@@ -3667,9 +4030,6 @@ static void dev_addr_discard(struct net_device *dev)
 {
 	netif_addr_lock_bh(dev);
 
-	__dev_addr_discard(&dev->uc_list);
-	dev->uc_count = 0;
-
 	__dev_addr_discard(&dev->mc_list);
 	dev->mc_count = 0;
 
@@ -3853,7 +4213,7 @@ static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cm
 
 	switch (cmd) {
 		case SIOCGIFFLAGS:	/* Get interface flags */
-			ifr->ifr_flags = dev_get_flags(dev);
+			ifr->ifr_flags = (short) dev_get_flags(dev);
 			return 0;
 
 		case SIOCGIFMETRIC:	/* Get the metric on the interface
@@ -4262,6 +4622,7 @@ static void rollback_registered(struct net_device *dev)
 	/*
 	 *	Flush the unicast and multicast chains
 	 */
+	dev_unicast_flush(dev);
 	dev_addr_discard(dev);
 
 	if (dev->netdev_ops->ndo_uninit)
@@ -4333,39 +4694,6 @@ unsigned long netdev_fix_features(unsigned long features, const char *name)
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
-/* Some devices need to (re-)set their netdev_ops inside
- * ->init() or similar.  If that happens, we have to setup
- * the compat pointers again.
- */
-void netdev_resync_ops(struct net_device *dev)
-{
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	const struct net_device_ops *ops = dev->netdev_ops;
-
-	dev->init = ops->ndo_init;
-	dev->uninit = ops->ndo_uninit;
-	dev->open = ops->ndo_open;
-	dev->change_rx_flags = ops->ndo_change_rx_flags;
-	dev->set_rx_mode = ops->ndo_set_rx_mode;
-	dev->set_multicast_list = ops->ndo_set_multicast_list;
-	dev->set_mac_address = ops->ndo_set_mac_address;
-	dev->validate_addr = ops->ndo_validate_addr;
-	dev->do_ioctl = ops->ndo_do_ioctl;
-	dev->set_config = ops->ndo_set_config;
-	dev->change_mtu = ops->ndo_change_mtu;
-	dev->neigh_setup = ops->ndo_neigh_setup;
-	dev->tx_timeout = ops->ndo_tx_timeout;
-	dev->get_stats = ops->ndo_get_stats;
-	dev->vlan_rx_register = ops->ndo_vlan_rx_register;
-	dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
-	dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ops->ndo_poll_controller;
-#endif
-#endif
-}
-EXPORT_SYMBOL(netdev_resync_ops);
-
 /**
  *	register_netdevice	- register a network device
  *	@dev: device to register
@@ -4405,23 +4733,6 @@ int register_netdevice(struct net_device *dev)
 
 	dev->iflink = -1;
 
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	/* Netdevice_ops API compatibility support.
-	 * This is temporary until all network devices are converted.
-	 */
-	if (dev->netdev_ops) {
-		netdev_resync_ops(dev);
-	} else {
-		char drivername[64];
-		pr_info("%s (%s): not using net_device_ops yet\n",
-			dev->name, netdev_drivername(dev, drivername, 64));
-
-		/* This works only because net_device_ops and the
-		   compatibility structure are the same. */
-		dev->netdev_ops = (void *) &(dev->init);
-	}
-#endif
-
 	/* Init, if this function is available */
 	if (dev->netdev_ops->ndo_init) {
 		ret = dev->netdev_ops->ndo_init(dev);
@@ -4707,13 +5018,30 @@ void netdev_run_todo(void)
  *	the internal statistics structure is used.
  */
 const struct net_device_stats *dev_get_stats(struct net_device *dev)
- {
+{
 	const struct net_device_ops *ops = dev->netdev_ops;
 
 	if (ops->ndo_get_stats)
 		return ops->ndo_get_stats(dev);
-	else
-		return &dev->stats;
+	else {
+		unsigned long tx_bytes = 0, tx_packets = 0, tx_dropped = 0;
+		struct net_device_stats *stats = &dev->stats;
+		unsigned int i;
+		struct netdev_queue *txq;
+
+		for (i = 0; i < dev->num_tx_queues; i++) {
+			txq = netdev_get_tx_queue(dev, i);
+			tx_bytes   += txq->tx_bytes;
+			tx_packets += txq->tx_packets;
+			tx_dropped += txq->tx_dropped;
+		}
+		if (tx_bytes || tx_packets || tx_dropped) {
+			stats->tx_bytes   = tx_bytes;
+			stats->tx_packets = tx_packets;
+			stats->tx_dropped = tx_dropped;
+		}
+		return stats;
+	}
 }
 EXPORT_SYMBOL(dev_get_stats);
 
@@ -4748,18 +5076,18 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	struct netdev_queue *tx;
 	struct net_device *dev;
 	size_t alloc_size;
-	void *p;
+	struct net_device *p;
 
 	BUG_ON(strlen(name) >= sizeof(dev->name));
 
 	alloc_size = sizeof(struct net_device);
 	if (sizeof_priv) {
 		/* ensure 32-byte alignment of private area */
-		alloc_size = (alloc_size + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST;
+		alloc_size = ALIGN(alloc_size, NETDEV_ALIGN);
 		alloc_size += sizeof_priv;
 	}
 	/* ensure 32-byte alignment of whole construct */
-	alloc_size += NETDEV_ALIGN_CONST;
+	alloc_size += NETDEV_ALIGN - 1;
 
 	p = kzalloc(alloc_size, GFP_KERNEL);
 	if (!p) {
@@ -4771,13 +5099,17 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	if (!tx) {
 		printk(KERN_ERR "alloc_netdev: Unable to allocate "
 		       "tx qdiscs.\n");
-		kfree(p);
-		return NULL;
+		goto free_p;
 	}
 
-	dev = (struct net_device *)
-		(((long)p + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+	dev = PTR_ALIGN(p, NETDEV_ALIGN);
 	dev->padded = (char *)dev - (char *)p;
+
+	if (dev_addr_init(dev))
+		goto free_tx;
+
+	dev_unicast_init(dev);
+
 	dev_net_set(dev, &init_net);
 
 	dev->_tx = tx;
@@ -4789,9 +5121,17 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	netdev_init_queues(dev);
 
 	INIT_LIST_HEAD(&dev->napi_list);
+	dev->priv_flags = IFF_XMIT_DST_RELEASE;
 	setup(dev);
 	strcpy(dev->name, name);
 	return dev;
+
+free_tx:
+	kfree(tx);
+
+free_p:
+	kfree(p);
+	return NULL;
 }
 EXPORT_SYMBOL(alloc_netdev_mq);
 
@@ -4811,6 +5151,9 @@ void free_netdev(struct net_device *dev)
 
 	kfree(dev->_tx);
 
+	/* Flush device addresses */
+	dev_addr_flush(dev);
+
 	list_for_each_entry_safe(p, n, &dev->napi_list, dev_list)
 		netif_napi_del(p);
 
@@ -4970,6 +5313,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	/*
 	 *	Flush the unicast and multicast chains
 	 */
+	dev_unicast_flush(dev);
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
@@ -5325,12 +5669,6 @@ EXPORT_SYMBOL(net_enable_timestamp);
 EXPORT_SYMBOL(net_disable_timestamp);
 EXPORT_SYMBOL(dev_get_flags);
 
-#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-EXPORT_SYMBOL(br_handle_frame_hook);
-EXPORT_SYMBOL(br_fdb_get_hook);
-EXPORT_SYMBOL(br_fdb_put_hook);
-#endif
-
 EXPORT_SYMBOL(dev_load);
 
 EXPORT_PER_CPU_SYMBOL(softnet_data);
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index b75b6cea49d..9d66fa953ab 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -22,8 +22,10 @@
 #include <linux/timer.h>
 #include <linux/bitops.h>
 #include <net/genetlink.h>
+#include <net/netevent.h>
 
 #include <trace/events/skb.h>
+#include <trace/events/napi.h>
 
 #include <asm/unaligned.h>
 
@@ -38,7 +40,8 @@ static void send_dm_alert(struct work_struct *unused);
  * and the work handle that will send up
  * netlink alerts
  */
-struct sock *dm_sock;
+static int trace_state = TRACE_OFF;
+static spinlock_t trace_state_lock = SPIN_LOCK_UNLOCKED;
 
 struct per_cpu_dm_data {
 	struct work_struct dm_alert_work;
@@ -47,11 +50,18 @@ struct per_cpu_dm_data {
 	struct timer_list send_timer;
 };
 
+struct dm_hw_stat_delta {
+	struct net_device *dev;
+	struct list_head list;
+	struct rcu_head rcu;
+	unsigned long last_drop_val;
+};
+
 static struct genl_family net_drop_monitor_family = {
 	.id             = GENL_ID_GENERATE,
 	.hdrsize        = 0,
 	.name           = "NET_DM",
-	.version        = 1,
+	.version        = 2,
 	.maxattr        = NET_DM_CMD_MAX,
 };
 
@@ -59,19 +69,24 @@ static DEFINE_PER_CPU(struct per_cpu_dm_data, dm_cpu_data);
 
 static int dm_hit_limit = 64;
 static int dm_delay = 1;
-
+static unsigned long dm_hw_check_delta = 2*HZ;
+static LIST_HEAD(hw_stats_list);
 
 static void reset_per_cpu_data(struct per_cpu_dm_data *data)
 {
 	size_t al;
 	struct net_dm_alert_msg *msg;
+	struct nlattr *nla;
 
 	al = sizeof(struct net_dm_alert_msg);
 	al += dm_hit_limit * sizeof(struct net_dm_drop_point);
+	al += sizeof(struct nlattr);
+
 	data->skb = genlmsg_new(al, GFP_KERNEL);
 	genlmsg_put(data->skb, 0, 0, &net_drop_monitor_family,
 			0, NET_DM_CMD_ALERT);
-	msg = __nla_reserve_nohdr(data->skb, sizeof(struct net_dm_alert_msg));
+	nla = nla_reserve(data->skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
+	msg = nla_data(nla);
 	memset(msg, 0, al);
 	atomic_set(&data->dm_hit_count, dm_hit_limit);
 }
@@ -111,10 +126,11 @@ static void sched_send_work(unsigned long unused)
 	schedule_work(&data->dm_alert_work);
 }
 
-static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
+static void trace_drop_common(struct sk_buff *skb, void *location)
 {
 	struct net_dm_alert_msg *msg;
 	struct nlmsghdr *nlh;
+	struct nlattr *nla;
 	int i;
 	struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data);
 
@@ -127,7 +143,8 @@ static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
 	}
 
 	nlh = (struct nlmsghdr *)data->skb->data;
-	msg = genlmsg_data(nlmsg_data(nlh));
+	nla = genlmsg_data(nlmsg_data(nlh));
+	msg = nla_data(nla);
 	for (i = 0; i < msg->entries; i++) {
 		if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
 			msg->points[i].count++;
@@ -139,6 +156,7 @@ static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
 	 * We need to create a new entry
 	 */
 	__nla_reserve_nohdr(data->skb, sizeof(struct net_dm_drop_point));
+	nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point));
 	memcpy(msg->points[msg->entries].pc, &location, sizeof(void *));
 	msg->points[msg->entries].count = 1;
 	msg->entries++;
@@ -152,24 +170,80 @@ out:
 	return;
 }
 
+static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
+{
+	trace_drop_common(skb, location);
+}
+
+static void trace_napi_poll_hit(struct napi_struct *napi)
+{
+	struct dm_hw_stat_delta *new_stat;
+
+	/*
+	 * Ratelimit our check time to dm_hw_check_delta jiffies
+	 */
+	if (!time_after(jiffies, napi->dev->last_rx + dm_hw_check_delta))
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(new_stat, &hw_stats_list, list) {
+		if ((new_stat->dev == napi->dev)  &&
+		    (napi->dev->stats.rx_dropped != new_stat->last_drop_val)) {
+			trace_drop_common(NULL, NULL);
+			new_stat->last_drop_val = napi->dev->stats.rx_dropped;
+			break;
+		}
+	}
+	rcu_read_unlock();
+}
+
+
+static void free_dm_hw_stat(struct rcu_head *head)
+{
+	struct dm_hw_stat_delta *n;
+	n = container_of(head, struct dm_hw_stat_delta, rcu);
+	kfree(n);
+}
+
 static int set_all_monitor_traces(int state)
 {
 	int rc = 0;
+	struct dm_hw_stat_delta *new_stat = NULL;
+	struct dm_hw_stat_delta *temp;
+
+	spin_lock(&trace_state_lock);
 
 	switch (state) {
 	case TRACE_ON:
 		rc |= register_trace_kfree_skb(trace_kfree_skb_hit);
+		rc |= register_trace_napi_poll(trace_napi_poll_hit);
 		break;
 	case TRACE_OFF:
 		rc |= unregister_trace_kfree_skb(trace_kfree_skb_hit);
+		rc |= unregister_trace_napi_poll(trace_napi_poll_hit);
 
 		tracepoint_synchronize_unregister();
+
+		/*
+		 * Clean the device list
+		 */
+		list_for_each_entry_safe(new_stat, temp, &hw_stats_list, list) {
+			if (new_stat->dev == NULL) {
+				list_del_rcu(&new_stat->list);
+				call_rcu(&new_stat->rcu, free_dm_hw_stat);
+			}
+		}
 		break;
 	default:
 		rc = 1;
 		break;
 	}
 
+	if (!rc)
+		trace_state = state;
+
+	spin_unlock(&trace_state_lock);
+
 	if (rc)
 		return -EINPROGRESS;
 	return rc;
@@ -197,6 +271,44 @@ static int net_dm_cmd_trace(struct sk_buff *skb,
 	return -ENOTSUPP;
 }
 
+static int dropmon_net_event(struct notifier_block *ev_block,
+			unsigned long event, void *ptr)
+{
+	struct net_device *dev = ptr;
+	struct dm_hw_stat_delta *new_stat = NULL;
+	struct dm_hw_stat_delta *tmp;
+
+	switch (event) {
+	case NETDEV_REGISTER:
+		new_stat = kzalloc(sizeof(struct dm_hw_stat_delta), GFP_KERNEL);
+
+		if (!new_stat)
+			goto out;
+
+		new_stat->dev = dev;
+		INIT_RCU_HEAD(&new_stat->rcu);
+		spin_lock(&trace_state_lock);
+		list_add_rcu(&new_stat->list, &hw_stats_list);
+		spin_unlock(&trace_state_lock);
+		break;
+	case NETDEV_UNREGISTER:
+		spin_lock(&trace_state_lock);
+		list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) {
+			if (new_stat->dev == dev) {
+				new_stat->dev = NULL;
+				if (trace_state == TRACE_OFF) {
+					list_del_rcu(&new_stat->list);
+					call_rcu(&new_stat->rcu, free_dm_hw_stat);
+					break;
+				}
+			}
+		}
+		spin_unlock(&trace_state_lock);
+		break;
+	}
+out:
+	return NOTIFY_DONE;
+}
 
 static struct genl_ops dropmon_ops[] = {
 	{
@@ -213,6 +325,10 @@ static struct genl_ops dropmon_ops[] = {
 	},
 };
 
+static struct notifier_block dropmon_net_notifier = {
+	.notifier_call = dropmon_net_event
+};
+
 static int __init init_net_drop_monitor(void)
 {
 	int cpu;
@@ -236,12 +352,18 @@ static int __init init_net_drop_monitor(void)
 		ret = genl_register_ops(&net_drop_monitor_family,
 					&dropmon_ops[i]);
 		if (ret) {
-			printk(KERN_CRIT "failed to register operation %d\n",
+			printk(KERN_CRIT "Failed to register operation %d\n",
 				dropmon_ops[i].cmd);
 			goto out_unreg;
 		}
 	}
 
+	rc = register_netdevice_notifier(&dropmon_net_notifier);
+	if (rc < 0) {
+		printk(KERN_CRIT "Failed to register netdevice notifier\n");
+		goto out_unreg;
+	}
+
 	rc = 0;
 
 	for_each_present_cpu(cpu) {
@@ -252,6 +374,7 @@ static int __init init_net_drop_monitor(void)
 		data->send_timer.data = cpu;
 		data->send_timer.function = sched_send_work;
 	}
+
 	goto out;
 
 out_unreg:
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 98691e1466b..bd309384f8b 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -299,7 +299,7 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
 	} else if (rule->action == FR_ACT_GOTO)
 		goto errout_free;
 
-	err = ops->configure(rule, skb, nlh, frh, tb);
+	err = ops->configure(rule, skb, frh, tb);
 	if (err < 0)
 		goto errout_free;
 
@@ -500,7 +500,7 @@ static int fib_nl_fill_rule(struct sk_buff *skb, struct fib_rule *rule,
 	if (rule->target)
 		NLA_PUT_U32(skb, FRA_GOTO, rule->target);
 
-	if (ops->fill(rule, skb, nlh, frh) < 0)
+	if (ops->fill(rule, skb, frh) < 0)
 		goto nla_put_failure;
 
 	return nlmsg_end(skb, nlh);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 6d62d4618cf..78e5bfc454a 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -128,12 +128,12 @@ static void est_timer(unsigned long arg)
 		npackets = e->bstats->packets;
 		brate = (nbytes - e->last_bytes)<<(7 - idx);
 		e->last_bytes = nbytes;
-		e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
+		e->avbps += (brate >> e->ewma_log) - (e->avbps >> e->ewma_log);
 		e->rate_est->bps = (e->avbps+0xF)>>5;
 
 		rate = (npackets - e->last_packets)<<(12 - idx);
 		e->last_packets = npackets;
-		e->avpps += ((long)rate - (long)e->avpps) >> e->ewma_log;
+		e->avpps += (rate >> e->ewma_log) - (e->avpps >> e->ewma_log);
 		e->rate_est->pps = (e->avpps+0x1FF)>>10;
 skip:
 		read_unlock(&est_lock);
diff --git a/net/core/iovec.c b/net/core/iovec.c
index 4c9c0121c9d..16ad45d4882 100644
--- a/net/core/iovec.c
+++ b/net/core/iovec.c
@@ -98,6 +98,31 @@ int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len)
 }
 
 /*
+ *	Copy kernel to iovec. Returns -EFAULT on error.
+ */
+
+int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
+		      int offset, int len)
+{
+	int copy;
+	for (; len > 0; ++iov) {
+		/* Skip over the finished iovecs */
+		if (unlikely(offset >= iov->iov_len)) {
+			offset -= iov->iov_len;
+			continue;
+		}
+		copy = min_t(unsigned int, iov->iov_len - offset, len);
+		if (copy_to_user(iov->iov_base + offset, kdata, copy))
+			return -EFAULT;
+		offset = 0;
+		kdata += copy;
+		len -= copy;
+	}
+
+	return 0;
+}
+
+/*
  *	Copy iovec to kernel. Returns -EFAULT on error.
  *
  *	Note: this modifies the original iovec.
@@ -122,10 +147,11 @@ int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
 }
 
 /*
- *	For use with ip_build_xmit
+ *	Copy iovec from kernel. Returns -EFAULT on error.
  */
-int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
-			int len)
+
+int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
+			int offset, int len)
 {
 	/* Skip over the finished iovecs */
 	while (offset >= iov->iov_len) {
@@ -236,3 +262,4 @@ EXPORT_SYMBOL(csum_partial_copy_fromiovecend);
 EXPORT_SYMBOL(memcpy_fromiovec);
 EXPORT_SYMBOL(memcpy_fromiovecend);
 EXPORT_SYMBOL(memcpy_toiovec);
+EXPORT_SYMBOL(memcpy_toiovecend);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index a1cbce7fdae..163b4f5b036 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -771,6 +771,28 @@ static __inline__ int neigh_max_probes(struct neighbour *n)
 		p->ucast_probes + p->app_probes + p->mcast_probes);
 }
 
+static void neigh_invalidate(struct neighbour *neigh)
+{
+	struct sk_buff *skb;
+
+	NEIGH_CACHE_STAT_INC(neigh->tbl, res_failed);
+	NEIGH_PRINTK2("neigh %p is failed.\n", neigh);
+	neigh->updated = jiffies;
+
+	/* It is very thin place. report_unreachable is very complicated
+	   routine. Particularly, it can hit the same neighbour entry!
+
+	   So that, we try to be accurate and avoid dead loop. --ANK
+	 */
+	while (neigh->nud_state == NUD_FAILED &&
+	       (skb = __skb_dequeue(&neigh->arp_queue)) != NULL) {
+		write_unlock(&neigh->lock);
+		neigh->ops->error_report(neigh, skb);
+		write_lock(&neigh->lock);
+	}
+	skb_queue_purge(&neigh->arp_queue);
+}
+
 /* Called when a timer expires for a neighbour entry. */
 
 static void neigh_timer_handler(unsigned long arg)
@@ -835,26 +857,9 @@ static void neigh_timer_handler(unsigned long arg)
 
 	if ((neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) &&
 	    atomic_read(&neigh->probes) >= neigh_max_probes(neigh)) {
-		struct sk_buff *skb;
-
 		neigh->nud_state = NUD_FAILED;
-		neigh->updated = jiffies;
 		notify = 1;
-		NEIGH_CACHE_STAT_INC(neigh->tbl, res_failed);
-		NEIGH_PRINTK2("neigh %p is failed.\n", neigh);
-
-		/* It is very thin place. report_unreachable is very complicated
-		   routine. Particularly, it can hit the same neighbour entry!
-
-		   So that, we try to be accurate and avoid dead loop. --ANK
-		 */
-		while (neigh->nud_state == NUD_FAILED &&
-		       (skb = __skb_dequeue(&neigh->arp_queue)) != NULL) {
-			write_unlock(&neigh->lock);
-			neigh->ops->error_report(neigh, skb);
-			write_lock(&neigh->lock);
-		}
-		skb_queue_purge(&neigh->arp_queue);
+		neigh_invalidate(neigh);
 	}
 
 	if (neigh->nud_state & NUD_IN_TIMER) {
@@ -1001,6 +1006,11 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 		neigh->nud_state = new;
 		err = 0;
 		notify = old & NUD_VALID;
+		if ((old & (NUD_INCOMPLETE | NUD_PROBE)) &&
+		    (new & NUD_FAILED)) {
+			neigh_invalidate(neigh);
+			notify = 1;
+		}
 		goto out;
 	}
 
@@ -1088,8 +1098,8 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 			struct neighbour *n1 = neigh;
 			write_unlock_bh(&neigh->lock);
 			/* On shaper/eql skb->dst->neighbour != neigh :( */
-			if (skb->dst && skb->dst->neighbour)
-				n1 = skb->dst->neighbour;
+			if (skb_dst(skb) && skb_dst(skb)->neighbour)
+				n1 = skb_dst(skb)->neighbour;
 			n1->output(skb);
 			write_lock_bh(&neigh->lock);
 		}
@@ -1182,7 +1192,7 @@ EXPORT_SYMBOL(neigh_compat_output);
 
 int neigh_resolve_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh;
 	int rc = 0;
 
@@ -1229,7 +1239,7 @@ EXPORT_SYMBOL(neigh_resolve_output);
 int neigh_connected_output(struct sk_buff *skb)
 {
 	int err;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 
@@ -1298,8 +1308,7 @@ void pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
 		if (time_before(tbl->proxy_timer.expires, sched_next))
 			sched_next = tbl->proxy_timer.expires;
 	}
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 	dev_hold(skb->dev);
 	__skb_queue_tail(&tbl->proxy_queue, skb);
 	mod_timer(&tbl->proxy_timer, sched_next);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 2da59a0ac4a..3994680c08b 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -78,7 +78,7 @@ static ssize_t netdev_store(struct device *dev, struct device_attribute *attr,
 		goto err;
 
 	if (!rtnl_trylock())
-		return -ERESTARTSYS;
+		return restart_syscall();
 
 	if (dev_isalive(net)) {
 		if ((ret = (*set)(net, new)) == 0)
@@ -225,7 +225,8 @@ static ssize_t store_ifalias(struct device *dev, struct device_attribute *attr,
 	if (len >  0 && buf[len - 1] == '\n')
 		--count;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	ret = dev_set_alias(netdev, buf, count);
 	rtnl_unlock();
 
@@ -238,7 +239,8 @@ static ssize_t show_ifalias(struct device *dev,
 	const struct net_device *netdev = to_net_dev(dev);
 	ssize_t ret = 0;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (netdev->ifalias)
 		ret = sprintf(buf, "%s\n", netdev->ifalias);
 	rtnl_unlock();
@@ -497,7 +499,6 @@ int netdev_register_kobject(struct net_device *net)
 	dev->platform_data = net;
 	dev->groups = groups;
 
-	BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
 	dev_set_name(dev, "%s", net->name);
 
 #ifdef CONFIG_SYSFS
diff --git a/net/core/net-traces.c b/net/core/net-traces.c
index 499a67eaf3a..f1e982c508b 100644
--- a/net/core/net-traces.c
+++ b/net/core/net-traces.c
@@ -25,5 +25,8 @@
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/skb.h>
+#include <trace/events/napi.h>
 
 EXPORT_TRACEPOINT_SYMBOL_GPL(kfree_skb);
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(napi_poll);
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index e3bebd36f05..b7292a2719d 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -115,41 +115,34 @@ static void net_free(struct net *net)
 	kmem_cache_free(net_cachep, net);
 }
 
-struct net *copy_net_ns(unsigned long flags, struct net *old_net)
+static struct net *net_create(void)
 {
-	struct net *new_net = NULL;
-	int err;
-
-	get_net(old_net);
-
-	if (!(flags & CLONE_NEWNET))
-		return old_net;
-
-	err = -ENOMEM;
-	new_net = net_alloc();
-	if (!new_net)
-		goto out_err;
+	struct net *net;
+	int rv;
 
+	net = net_alloc();
+	if (!net)
+		return ERR_PTR(-ENOMEM);
 	mutex_lock(&net_mutex);
-	err = setup_net(new_net);
-	if (!err) {
+	rv = setup_net(net);
+	if (rv == 0) {
 		rtnl_lock();
-		list_add_tail(&new_net->list, &net_namespace_list);
+		list_add_tail(&net->list, &net_namespace_list);
 		rtnl_unlock();
 	}
 	mutex_unlock(&net_mutex);
+	if (rv < 0) {
+		net_free(net);
+		return ERR_PTR(rv);
+	}
+	return net;
+}
 
-	if (err)
-		goto out_free;
-out:
-	put_net(old_net);
-	return new_net;
-
-out_free:
-	net_free(new_net);
-out_err:
-	new_net = ERR_PTR(err);
-	goto out;
+struct net *copy_net_ns(unsigned long flags, struct net *old_net)
+{
+	if (!(flags & CLONE_NEWNET))
+		return get_net(old_net);
+	return net_create();
 }
 
 static void cleanup_net(struct work_struct *work)
@@ -203,9 +196,7 @@ struct net *copy_net_ns(unsigned long flags, struct net *old_net)
 static int __init net_ns_init(void)
 {
 	struct net_generic *ng;
-	int err;
 
-	printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net));
 #ifdef CONFIG_NET_NS
 	net_cachep = kmem_cache_create("net_namespace", sizeof(struct net),
 					SMP_CACHE_BYTES,
@@ -224,15 +215,14 @@ static int __init net_ns_init(void)
 	rcu_assign_pointer(init_net.gen, ng);
 
 	mutex_lock(&net_mutex);
-	err = setup_net(&init_net);
+	if (setup_net(&init_net))
+		panic("Could not setup the initial network namespace");
 
 	rtnl_lock();
 	list_add_tail(&init_net.list, &net_namespace_list);
 	rtnl_unlock();
 
 	mutex_unlock(&net_mutex);
-	if (err)
-		panic("Could not setup the initial network namespace");
 
 	return 0;
 }
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 64f51eec657..9675f312830 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -24,6 +24,7 @@
 #include <net/tcp.h>
 #include <net/udp.h>
 #include <asm/unaligned.h>
+#include <trace/events/napi.h>
 
 /*
  * We maintain a small pool of fully-sized skbs, to make sure the
@@ -137,6 +138,7 @@ static int poll_one_napi(struct netpoll_info *npinfo,
 	set_bit(NAPI_STATE_NPSVC, &napi->state);
 
 	work = napi->poll(napi, budget);
+	trace_napi_poll(napi);
 
 	clear_bit(NAPI_STATE_NPSVC, &napi->state);
 	atomic_dec(&trapped);
@@ -300,8 +302,11 @@ static void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
 		for (tries = jiffies_to_usecs(1)/USEC_PER_POLL;
 		     tries > 0; --tries) {
 			if (__netif_tx_trylock(txq)) {
-				if (!netif_tx_queue_stopped(txq))
+				if (!netif_tx_queue_stopped(txq)) {
 					status = ops->ndo_start_xmit(skb, dev);
+					if (status == NETDEV_TX_OK)
+						txq_trans_update(txq);
+				}
 				__netif_tx_unlock(txq);
 
 				if (status == NETDEV_TX_OK)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 0666a827bc6..19b8c20e98a 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3438,6 +3438,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 	      retry_now:
 		ret = (*xmit)(pkt_dev->skb, odev);
 		if (likely(ret == NETDEV_TX_OK)) {
+			txq_trans_update(txq);
 			pkt_dev->last_ok = 1;
 			pkt_dev->sofar++;
 			pkt_dev->seq_num++;
@@ -3690,8 +3691,7 @@ out1:
 #ifdef CONFIG_XFRM
 	free_SAs(pkt_dev);
 #endif
-	if (pkt_dev->flows)
-		vfree(pkt_dev->flows);
+	vfree(pkt_dev->flows);
 	kfree(pkt_dev);
 	return err;
 }
@@ -3790,8 +3790,7 @@ static int pktgen_remove_device(struct pktgen_thread *t,
 #ifdef CONFIG_XFRM
 	free_SAs(pkt_dev);
 #endif
-	if (pkt_dev->flows)
-		vfree(pkt_dev->flows);
+	vfree(pkt_dev->flows);
 	kfree(pkt_dev);
 	return 0;
 }
diff --git a/net/core/skb_dma_map.c b/net/core/skb_dma_map.c
index 86234923a3b..79687dfd695 100644
--- a/net/core/skb_dma_map.c
+++ b/net/core/skb_dma_map.c
@@ -20,7 +20,7 @@ int skb_dma_map(struct device *dev, struct sk_buff *skb,
 	if (dma_mapping_error(dev, map))
 		goto out_err;
 
-	sp->dma_maps[0] = map;
+	sp->dma_head = map;
 	for (i = 0; i < sp->nr_frags; i++) {
 		skb_frag_t *fp = &sp->frags[i];
 
@@ -28,9 +28,8 @@ int skb_dma_map(struct device *dev, struct sk_buff *skb,
 				   fp->size, dir);
 		if (dma_mapping_error(dev, map))
 			goto unwind;
-		sp->dma_maps[i + 1] = map;
+		sp->dma_maps[i] = map;
 	}
-	sp->num_dma_maps = i + 1;
 
 	return 0;
 
@@ -38,10 +37,10 @@ unwind:
 	while (--i >= 0) {
 		skb_frag_t *fp = &sp->frags[i];
 
-		dma_unmap_page(dev, sp->dma_maps[i + 1],
+		dma_unmap_page(dev, sp->dma_maps[i],
 			       fp->size, dir);
 	}
-	dma_unmap_single(dev, sp->dma_maps[0],
+	dma_unmap_single(dev, sp->dma_head,
 			 skb_headlen(skb), dir);
 out_err:
 	return -ENOMEM;
@@ -54,12 +53,12 @@ void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
 	struct skb_shared_info *sp = skb_shinfo(skb);
 	int i;
 
-	dma_unmap_single(dev, sp->dma_maps[0],
+	dma_unmap_single(dev, sp->dma_head,
 			 skb_headlen(skb), dir);
 	for (i = 0; i < sp->nr_frags; i++) {
 		skb_frag_t *fp = &sp->frags[i];
 
-		dma_unmap_page(dev, sp->dma_maps[i + 1],
+		dma_unmap_page(dev, sp->dma_maps[i],
 			       fp->size, dir);
 	}
 }
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index c2e4fb8f354..1a94a303737 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -210,7 +210,7 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
 	shinfo->gso_type = 0;
 	shinfo->ip6_frag_id = 0;
 	shinfo->tx_flags.flags = 0;
-	shinfo->frag_list = NULL;
+	skb_frag_list_init(skb);
 	memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
 
 	if (fclone) {
@@ -323,7 +323,7 @@ static void skb_clone_fraglist(struct sk_buff *skb)
 {
 	struct sk_buff *list;
 
-	for (list = skb_shinfo(skb)->frag_list; list; list = list->next)
+	skb_walk_frags(skb, list)
 		skb_get(list);
 }
 
@@ -338,7 +338,7 @@ static void skb_release_data(struct sk_buff *skb)
 				put_page(skb_shinfo(skb)->frags[i].page);
 		}
 
-		if (skb_shinfo(skb)->frag_list)
+		if (skb_has_frags(skb))
 			skb_drop_fraglist(skb);
 
 		kfree(skb->head);
@@ -381,7 +381,7 @@ static void kfree_skbmem(struct sk_buff *skb)
 
 static void skb_release_head_state(struct sk_buff *skb)
 {
-	dst_release(skb->dst);
+	skb_dst_drop(skb);
 #ifdef CONFIG_XFRM
 	secpath_put(skb->sp);
 #endif
@@ -503,7 +503,7 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size)
 	shinfo->gso_type = 0;
 	shinfo->ip6_frag_id = 0;
 	shinfo->tx_flags.flags = 0;
-	shinfo->frag_list = NULL;
+	skb_frag_list_init(skb);
 	memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
 
 	memset(skb, 0, offsetof(struct sk_buff, tail));
@@ -521,13 +521,12 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 	new->transport_header	= old->transport_header;
 	new->network_header	= old->network_header;
 	new->mac_header		= old->mac_header;
-	new->dst		= dst_clone(old->dst);
+	skb_dst_set(new, dst_clone(skb_dst(old)));
 #ifdef CONFIG_XFRM
 	new->sp			= secpath_get(old->sp);
 #endif
 	memcpy(new->cb, old->cb, sizeof(old->cb));
-	new->csum_start		= old->csum_start;
-	new->csum_offset	= old->csum_offset;
+	new->csum		= old->csum;
 	new->local_df		= old->local_df;
 	new->pkt_type		= old->pkt_type;
 	new->ip_summed		= old->ip_summed;
@@ -538,6 +537,7 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 #endif
 	new->protocol		= old->protocol;
 	new->mark		= old->mark;
+	new->iif		= old->iif;
 	__nf_copy(new, old);
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
@@ -550,10 +550,17 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 #endif
 #endif
 	new->vlan_tci		= old->vlan_tci;
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	new->do_not_encrypt	= old->do_not_encrypt;
+#endif
 
 	skb_copy_secmark(new, old);
 }
 
+/*
+ * You should not add any new code to this function.  Add it to
+ * __copy_skb_header above instead.
+ */
 static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 {
 #define C(x) n->x = skb->x
@@ -569,16 +576,11 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 	n->cloned = 1;
 	n->nohdr = 0;
 	n->destructor = NULL;
-	C(iif);
 	C(tail);
 	C(end);
 	C(head);
 	C(data);
 	C(truesize);
-#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
-	C(do_not_encrypt);
-	C(requeue);
-#endif
 	atomic_set(&n->users, 1);
 
 	atomic_inc(&(skb_shinfo(skb)->dataref));
@@ -755,7 +757,7 @@ struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask)
 		skb_shinfo(n)->nr_frags = i;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
+	if (skb_has_frags(skb)) {
 		skb_shinfo(n)->frag_list = skb_shinfo(skb)->frag_list;
 		skb_clone_fraglist(n);
 	}
@@ -818,7 +820,7 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
 		get_page(skb_shinfo(skb)->frags[i].page);
 
-	if (skb_shinfo(skb)->frag_list)
+	if (skb_has_frags(skb))
 		skb_clone_fraglist(skb);
 
 	skb_release_data(skb);
@@ -1090,7 +1092,7 @@ drop_pages:
 		for (; i < nfrags; i++)
 			put_page(skb_shinfo(skb)->frags[i].page);
 
-		if (skb_shinfo(skb)->frag_list)
+		if (skb_has_frags(skb))
 			skb_drop_fraglist(skb);
 		goto done;
 	}
@@ -1185,7 +1187,7 @@ unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta)
 	/* Optimization: no fragments, no reasons to preestimate
 	 * size of pulled pages. Superb.
 	 */
-	if (!skb_shinfo(skb)->frag_list)
+	if (!skb_has_frags(skb))
 		goto pull_pages;
 
 	/* Estimate size of pulled pages. */
@@ -1282,8 +1284,9 @@ EXPORT_SYMBOL(__pskb_pull_tail);
 
 int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 {
-	int i, copy;
 	int start = skb_headlen(skb);
+	struct sk_buff *frag_iter;
+	int i, copy;
 
 	if (offset > (int)skb->len - len)
 		goto fault;
@@ -1325,28 +1328,23 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_copy_bits(list, offset - start,
-						  to, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-				to     += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_bits(frag_iter, offset - start, to, copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			to     += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -1531,6 +1529,7 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
 		.ops = &sock_pipe_buf_ops,
 		.spd_release = sock_spd_release,
 	};
+	struct sk_buff *frag_iter;
 	struct sock *sk = skb->sk;
 
 	/*
@@ -1545,13 +1544,11 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
 	/*
 	 * now see if we have a frag_list to map
 	 */
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list && tlen; list = list->next) {
-			if (__skb_splice_bits(list, &offset, &tlen, &spd, sk))
-				break;
-		}
+	skb_walk_frags(skb, frag_iter) {
+		if (!tlen)
+			break;
+		if (__skb_splice_bits(frag_iter, &offset, &tlen, &spd, sk))
+			break;
 	}
 
 done:
@@ -1590,8 +1587,9 @@ done:
 
 int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 {
-	int i, copy;
 	int start = skb_headlen(skb);
+	struct sk_buff *frag_iter;
+	int i, copy;
 
 	if (offset > (int)skb->len - len)
 		goto fault;
@@ -1632,28 +1630,24 @@ int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_store_bits(list, offset - start,
-						   from, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-				from += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_store_bits(frag_iter, offset - start,
+					   from, copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			from += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -1670,6 +1664,7 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	int pos = 0;
 
 	/* Checksum header. */
@@ -1709,29 +1704,25 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				__wsum csum2;
-				if (copy > len)
-					copy = len;
-				csum2 = skb_checksum(list, offset - start,
-						     copy, 0);
-				csum = csum_block_add(csum, csum2, pos);
-				if ((len -= copy) == 0)
-					return csum;
-				offset += copy;
-				pos    += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			__wsum csum2;
+			if (copy > len)
+				copy = len;
+			csum2 = skb_checksum(frag_iter, offset - start,
+					     copy, 0);
+			csum = csum_block_add(csum, csum2, pos);
+			if ((len -= copy) == 0)
+				return csum;
+			offset += copy;
+			pos    += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 
@@ -1746,6 +1737,7 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	int pos = 0;
 
 	/* Copy header. */
@@ -1790,31 +1782,27 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		__wsum csum2;
+		int end;
 
-		for (; list; list = list->next) {
-			__wsum csum2;
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				csum2 = skb_copy_and_csum_bits(list,
-							       offset - start,
-							       to, copy, 0);
-				csum = csum_block_add(csum, csum2, pos);
-				if ((len -= copy) == 0)
-					return csum;
-				offset += copy;
-				to     += copy;
-				pos    += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			csum2 = skb_copy_and_csum_bits(frag_iter,
+						       offset - start,
+						       to, copy, 0);
+			csum = csum_block_add(csum, csum2, pos);
+			if ((len -= copy) == 0)
+				return csum;
+			offset += copy;
+			to     += copy;
+			pos    += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 	return csum;
@@ -2324,8 +2312,7 @@ next_skb:
 		st->frag_data = NULL;
 	}
 
-	if (st->root_skb == st->cur_skb &&
-	    skb_shinfo(st->root_skb)->frag_list) {
+	if (st->root_skb == st->cur_skb && skb_has_frags(st->root_skb)) {
 		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
 		st->frag_idx = 0;
 		goto next_skb;
@@ -2636,7 +2623,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 			} else
 				skb_get(fskb2);
 
-			BUG_ON(skb_shinfo(nskb)->frag_list);
+			SKB_FRAG_ASSERT(nskb);
 			skb_shinfo(nskb)->frag_list = fskb2;
 		}
 
@@ -2661,30 +2648,40 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 {
 	struct sk_buff *p = *head;
 	struct sk_buff *nskb;
+	struct skb_shared_info *skbinfo = skb_shinfo(skb);
+	struct skb_shared_info *pinfo = skb_shinfo(p);
 	unsigned int headroom;
 	unsigned int len = skb_gro_len(skb);
+	unsigned int offset = skb_gro_offset(skb);
+	unsigned int headlen = skb_headlen(skb);
 
 	if (p->len + len >= 65536)
 		return -E2BIG;
 
-	if (skb_shinfo(p)->frag_list)
+	if (pinfo->frag_list)
 		goto merge;
-	else if (skb_headlen(skb) <= skb_gro_offset(skb)) {
-		if (skb_shinfo(p)->nr_frags + skb_shinfo(skb)->nr_frags >
-		    MAX_SKB_FRAGS)
+	else if (headlen <= offset) {
+		skb_frag_t *frag;
+		skb_frag_t *frag2;
+		int i = skbinfo->nr_frags;
+		int nr_frags = pinfo->nr_frags + i;
+
+		offset -= headlen;
+
+		if (nr_frags > MAX_SKB_FRAGS)
 			return -E2BIG;
 
-		skb_shinfo(skb)->frags[0].page_offset +=
-			skb_gro_offset(skb) - skb_headlen(skb);
-		skb_shinfo(skb)->frags[0].size -=
-			skb_gro_offset(skb) - skb_headlen(skb);
+		pinfo->nr_frags = nr_frags;
+		skbinfo->nr_frags = 0;
 
-		memcpy(skb_shinfo(p)->frags + skb_shinfo(p)->nr_frags,
-		       skb_shinfo(skb)->frags,
-		       skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t));
+		frag = pinfo->frags + nr_frags;
+		frag2 = skbinfo->frags + i;
+		do {
+			*--frag = *--frag2;
+		} while (--i);
 
-		skb_shinfo(p)->nr_frags += skb_shinfo(skb)->nr_frags;
-		skb_shinfo(skb)->nr_frags = 0;
+		frag->page_offset += offset;
+		frag->size -= offset;
 
 		skb->truesize -= skb->data_len;
 		skb->len -= skb->data_len;
@@ -2715,7 +2712,7 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 	*NAPI_GRO_CB(nskb) = *NAPI_GRO_CB(p);
 	skb_shinfo(nskb)->frag_list = p;
-	skb_shinfo(nskb)->gso_size = skb_shinfo(p)->gso_size;
+	skb_shinfo(nskb)->gso_size = pinfo->gso_size;
 	skb_header_release(p);
 	nskb->prev = p;
 
@@ -2730,16 +2727,13 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 	p = nskb;
 
 merge:
-	if (skb_gro_offset(skb) > skb_headlen(skb)) {
-		skb_shinfo(skb)->frags[0].page_offset +=
-			skb_gro_offset(skb) - skb_headlen(skb);
-		skb_shinfo(skb)->frags[0].size -=
-			skb_gro_offset(skb) - skb_headlen(skb);
-		skb_gro_reset_offset(skb);
-		skb_gro_pull(skb, skb_headlen(skb));
+	if (offset > headlen) {
+		skbinfo->frags[0].page_offset += offset - headlen;
+		skbinfo->frags[0].size -= offset - headlen;
+		offset = headlen;
 	}
 
-	__skb_pull(skb, skb_gro_offset(skb));
+	__skb_pull(skb, offset);
 
 	p->prev->next = skb;
 	p->prev = skb;
@@ -2786,6 +2780,7 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	int elt = 0;
 
 	if (copy > 0) {
@@ -2819,26 +2814,22 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-			WARN_ON(start > offset + len);
+		WARN_ON(start > offset + len);
 
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				elt += __skb_to_sgvec(list, sg+elt, offset - start,
-						      copy);
-				if ((len -= copy) == 0)
-					return elt;
-				offset += copy;
-			}
-			start = end;
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			elt += __skb_to_sgvec(frag_iter, sg+elt, offset - start,
+					      copy);
+			if ((len -= copy) == 0)
+				return elt;
+			offset += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 	return elt;
@@ -2886,7 +2877,7 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 		return -ENOMEM;
 
 	/* Easy case. Most of packets will go this way. */
-	if (!skb_shinfo(skb)->frag_list) {
+	if (!skb_has_frags(skb)) {
 		/* A little of trouble, not enough of space for trailer.
 		 * This should not happen, when stack is tuned to generate
 		 * good frames. OK, on miss we reallocate and reserve even more
@@ -2921,7 +2912,7 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 
 		if (skb1->next == NULL && tailbits) {
 			if (skb_shinfo(skb1)->nr_frags ||
-			    skb_shinfo(skb1)->frag_list ||
+			    skb_has_frags(skb1) ||
 			    skb_tailroom(skb1) < tailbits)
 				ntail = tailbits + 128;
 		}
@@ -2930,7 +2921,7 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 		    skb_cloned(skb1) ||
 		    ntail ||
 		    skb_shinfo(skb1)->nr_frags ||
-		    skb_shinfo(skb1)->frag_list) {
+		    skb_has_frags(skb1)) {
 			struct sk_buff *skb2;
 
 			/* Fuck, we are miserable poor guys... */
@@ -3016,12 +3007,12 @@ EXPORT_SYMBOL_GPL(skb_tstamp_tx);
  */
 bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off)
 {
-	if (unlikely(start > skb->len - 2) ||
-	    unlikely((int)start + off > skb->len - 2)) {
+	if (unlikely(start > skb_headlen(skb)) ||
+	    unlikely((int)start + off > skb_headlen(skb) - 2)) {
 		if (net_ratelimit())
 			printk(KERN_WARNING
 			       "bad partial csum: csum=%u/%u len=%u\n",
-			       start, off, skb->len);
+			       start, off, skb_headlen(skb));
 		return false;
 	}
 	skb->ip_summed = CHECKSUM_PARTIAL;
diff --git a/net/core/sock.c b/net/core/sock.c
index 7dbf3ffb35c..06e26b77ad9 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -155,6 +155,7 @@ static const char *af_family_key_strings[AF_MAX+1] = {
   "sk_lock-27"       , "sk_lock-28"          , "sk_lock-AF_CAN"      ,
   "sk_lock-AF_TIPC"  , "sk_lock-AF_BLUETOOTH", "sk_lock-IUCV"        ,
   "sk_lock-AF_RXRPC" , "sk_lock-AF_ISDN"     , "sk_lock-AF_PHONET"   ,
+  "sk_lock-AF_IEEE802154",
   "sk_lock-AF_MAX"
 };
 static const char *af_family_slock_key_strings[AF_MAX+1] = {
@@ -170,6 +171,7 @@ static const char *af_family_slock_key_strings[AF_MAX+1] = {
   "slock-27"       , "slock-28"          , "slock-AF_CAN"      ,
   "slock-AF_TIPC"  , "slock-AF_BLUETOOTH", "slock-AF_IUCV"     ,
   "slock-AF_RXRPC" , "slock-AF_ISDN"     , "slock-AF_PHONET"   ,
+  "slock-AF_IEEE802154",
   "slock-AF_MAX"
 };
 static const char *af_family_clock_key_strings[AF_MAX+1] = {
@@ -185,6 +187,7 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = {
   "clock-27"       , "clock-28"          , "clock-AF_CAN"      ,
   "clock-AF_TIPC"  , "clock-AF_BLUETOOTH", "clock-AF_IUCV"     ,
   "clock-AF_RXRPC" , "clock-AF_ISDN"     , "clock-AF_PHONET"   ,
+  "clock-AF_IEEE802154",
   "clock-AF_MAX"
 };
 
@@ -212,6 +215,7 @@ __u32 sysctl_rmem_default __read_mostly = SK_RMEM_MAX;
 
 /* Maximal space eaten by iovec or ancilliary data plus some space */
 int sysctl_optmem_max __read_mostly = sizeof(unsigned long)*(2*UIO_MAXIOV+512);
+EXPORT_SYMBOL(sysctl_optmem_max);
 
 static int sock_set_timeout(long *timeo_p, char __user *optval, int optlen)
 {
@@ -444,7 +448,7 @@ static inline void sock_valbool_flag(struct sock *sk, int bit, int valbool)
 int sock_setsockopt(struct socket *sock, int level, int optname,
 		    char __user *optval, int optlen)
 {
-	struct sock *sk=sock->sk;
+	struct sock *sk = sock->sk;
 	int val;
 	int valbool;
 	struct linger ling;
@@ -463,15 +467,15 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 	if (get_user(val, (int __user *)optval))
 		return -EFAULT;
 
-	valbool = val?1:0;
+	valbool = val ? 1 : 0;
 
 	lock_sock(sk);
 
-	switch(optname) {
+	switch (optname) {
 	case SO_DEBUG:
-		if (val && !capable(CAP_NET_ADMIN)) {
+		if (val && !capable(CAP_NET_ADMIN))
 			ret = -EACCES;
-		} else
+		else
 			sock_valbool_flag(sk, SOCK_DBG, valbool);
 		break;
 	case SO_REUSEADDR:
@@ -582,7 +586,7 @@ set_rcvbuf:
 			ret = -EINVAL;	/* 1003.1g */
 			break;
 		}
-		if (copy_from_user(&ling,optval,sizeof(ling))) {
+		if (copy_from_user(&ling, optval, sizeof(ling))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -690,9 +694,8 @@ set_rcvbuf:
 	case SO_MARK:
 		if (!capable(CAP_NET_ADMIN))
 			ret = -EPERM;
-		else {
+		else
 			sk->sk_mark = val;
-		}
 		break;
 
 		/* We implement the SO_SNDLOWAT etc to
@@ -704,6 +707,7 @@ set_rcvbuf:
 	release_sock(sk);
 	return ret;
 }
+EXPORT_SYMBOL(sock_setsockopt);
 
 
 int sock_getsockopt(struct socket *sock, int level, int optname,
@@ -727,7 +731,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 
 	memset(&v, 0, sizeof(v));
 
-	switch(optname) {
+	switch (optname) {
 	case SO_DEBUG:
 		v.val = sock_flag(sk, SOCK_DBG);
 		break;
@@ -762,7 +766,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 
 	case SO_ERROR:
 		v.val = -sock_error(sk);
-		if (v.val==0)
+		if (v.val == 0)
 			v.val = xchg(&sk->sk_err_soft, 0);
 		break;
 
@@ -816,7 +820,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 	case SO_RCVTIMEO:
-		lv=sizeof(struct timeval);
+		lv = sizeof(struct timeval);
 		if (sk->sk_rcvtimeo == MAX_SCHEDULE_TIMEOUT) {
 			v.tm.tv_sec = 0;
 			v.tm.tv_usec = 0;
@@ -827,7 +831,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 	case SO_SNDTIMEO:
-		lv=sizeof(struct timeval);
+		lv = sizeof(struct timeval);
 		if (sk->sk_sndtimeo == MAX_SCHEDULE_TIMEOUT) {
 			v.tm.tv_sec = 0;
 			v.tm.tv_usec = 0;
@@ -842,7 +846,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 	case SO_SNDLOWAT:
-		v.val=1;
+		v.val = 1;
 		break;
 
 	case SO_PASSCRED:
@@ -1002,8 +1006,9 @@ struct sock *sk_alloc(struct net *net, int family, gfp_t priority,
 
 	return sk;
 }
+EXPORT_SYMBOL(sk_alloc);
 
-void sk_free(struct sock *sk)
+static void __sk_free(struct sock *sk)
 {
 	struct sk_filter *filter;
 
@@ -1027,6 +1032,18 @@ void sk_free(struct sock *sk)
 	sk_prot_free(sk->sk_prot_creator, sk);
 }
 
+void sk_free(struct sock *sk)
+{
+	/*
+	 * We substract one from sk_wmem_alloc and can know if
+	 * some packets are still in some tx queue.
+	 * If not null, sock_wfree() will call __sk_free(sk) later
+	 */
+	if (atomic_dec_and_test(&sk->sk_wmem_alloc))
+		__sk_free(sk);
+}
+EXPORT_SYMBOL(sk_free);
+
 /*
  * Last sock_put should drop referrence to sk->sk_net. It has already
  * been dropped in sk_change_net. Taking referrence to stopping namespace
@@ -1065,7 +1082,10 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 		newsk->sk_backlog.head	= newsk->sk_backlog.tail = NULL;
 
 		atomic_set(&newsk->sk_rmem_alloc, 0);
-		atomic_set(&newsk->sk_wmem_alloc, 0);
+		/*
+		 * sk_wmem_alloc set to one (see sk_free() and sock_wfree())
+		 */
+		atomic_set(&newsk->sk_wmem_alloc, 1);
 		atomic_set(&newsk->sk_omem_alloc, 0);
 		skb_queue_head_init(&newsk->sk_receive_queue);
 		skb_queue_head_init(&newsk->sk_write_queue);
@@ -1126,7 +1146,6 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 out:
 	return newsk;
 }
-
 EXPORT_SYMBOL_GPL(sk_clone);
 
 void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
@@ -1170,13 +1189,20 @@ void __init sk_init(void)
 void sock_wfree(struct sk_buff *skb)
 {
 	struct sock *sk = skb->sk;
+	int res;
 
 	/* In case it might be waiting for more memory. */
-	atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
+	res = atomic_sub_return(skb->truesize, &sk->sk_wmem_alloc);
 	if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE))
 		sk->sk_write_space(sk);
-	sock_put(sk);
+	/*
+	 * if sk_wmem_alloc reached 0, we are last user and should
+	 * free this sock, as sk_free() call could not do it.
+	 */
+	if (res == 0)
+		__sk_free(sk);
 }
+EXPORT_SYMBOL(sock_wfree);
 
 /*
  * Read buffer destructor automatically called from kfree_skb.
@@ -1188,6 +1214,7 @@ void sock_rfree(struct sk_buff *skb)
 	atomic_sub(skb->truesize, &sk->sk_rmem_alloc);
 	sk_mem_uncharge(skb->sk, skb->truesize);
 }
+EXPORT_SYMBOL(sock_rfree);
 
 
 int sock_i_uid(struct sock *sk)
@@ -1199,6 +1226,7 @@ int sock_i_uid(struct sock *sk)
 	read_unlock(&sk->sk_callback_lock);
 	return uid;
 }
+EXPORT_SYMBOL(sock_i_uid);
 
 unsigned long sock_i_ino(struct sock *sk)
 {
@@ -1209,6 +1237,7 @@ unsigned long sock_i_ino(struct sock *sk)
 	read_unlock(&sk->sk_callback_lock);
 	return ino;
 }
+EXPORT_SYMBOL(sock_i_ino);
 
 /*
  * Allocate a skb from the socket's send buffer.
@@ -1217,7 +1246,7 @@ struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force,
 			     gfp_t priority)
 {
 	if (force || atomic_read(&sk->sk_wmem_alloc) < sk->sk_sndbuf) {
-		struct sk_buff * skb = alloc_skb(size, priority);
+		struct sk_buff *skb = alloc_skb(size, priority);
 		if (skb) {
 			skb_set_owner_w(skb, sk);
 			return skb;
@@ -1225,6 +1254,7 @@ struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force,
 	}
 	return NULL;
 }
+EXPORT_SYMBOL(sock_wmalloc);
 
 /*
  * Allocate a skb from the socket's receive buffer.
@@ -1261,6 +1291,7 @@ void *sock_kmalloc(struct sock *sk, int size, gfp_t priority)
 	}
 	return NULL;
 }
+EXPORT_SYMBOL(sock_kmalloc);
 
 /*
  * Free an option memory block.
@@ -1270,11 +1301,12 @@ void sock_kfree_s(struct sock *sk, void *mem, int size)
 	kfree(mem);
 	atomic_sub(size, &sk->sk_omem_alloc);
 }
+EXPORT_SYMBOL(sock_kfree_s);
 
 /* It is almost wait_for_tcp_memory minus release_sock/lock_sock.
    I think, these locks should be removed for datagram sockets.
  */
-static long sock_wait_for_wmem(struct sock * sk, long timeo)
+static long sock_wait_for_wmem(struct sock *sk, long timeo)
 {
 	DEFINE_WAIT(wait);
 
@@ -1392,6 +1424,7 @@ struct sk_buff *sock_alloc_send_skb(struct sock *sk, unsigned long size,
 {
 	return sock_alloc_send_pskb(sk, size, 0, noblock, errcode);
 }
+EXPORT_SYMBOL(sock_alloc_send_skb);
 
 static void __lock_sock(struct sock *sk)
 {
@@ -1460,7 +1493,6 @@ int sk_wait_data(struct sock *sk, long *timeo)
 	finish_wait(sk->sk_sleep, &wait);
 	return rc;
 }
-
 EXPORT_SYMBOL(sk_wait_data);
 
 /**
@@ -1541,7 +1573,6 @@ suppress_allocation:
 	atomic_sub(amt, prot->memory_allocated);
 	return 0;
 }
-
 EXPORT_SYMBOL(__sk_mem_schedule);
 
 /**
@@ -1560,7 +1591,6 @@ void __sk_mem_reclaim(struct sock *sk)
 	    (atomic_read(prot->memory_allocated) < prot->sysctl_mem[0]))
 		*prot->memory_pressure = 0;
 }
-
 EXPORT_SYMBOL(__sk_mem_reclaim);
 
 
@@ -1575,78 +1605,92 @@ int sock_no_bind(struct socket *sock, struct sockaddr *saddr, int len)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_bind);
 
 int sock_no_connect(struct socket *sock, struct sockaddr *saddr,
 		    int len, int flags)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_connect);
 
 int sock_no_socketpair(struct socket *sock1, struct socket *sock2)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_socketpair);
 
 int sock_no_accept(struct socket *sock, struct socket *newsock, int flags)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_accept);
 
 int sock_no_getname(struct socket *sock, struct sockaddr *saddr,
 		    int *len, int peer)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_getname);
 
-unsigned int sock_no_poll(struct file * file, struct socket *sock, poll_table *pt)
+unsigned int sock_no_poll(struct file *file, struct socket *sock, poll_table *pt)
 {
 	return 0;
 }
+EXPORT_SYMBOL(sock_no_poll);
 
 int sock_no_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_ioctl);
 
 int sock_no_listen(struct socket *sock, int backlog)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_listen);
 
 int sock_no_shutdown(struct socket *sock, int how)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_shutdown);
 
 int sock_no_setsockopt(struct socket *sock, int level, int optname,
 		    char __user *optval, int optlen)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_setsockopt);
 
 int sock_no_getsockopt(struct socket *sock, int level, int optname,
 		    char __user *optval, int __user *optlen)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_getsockopt);
 
 int sock_no_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
 		    size_t len)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_sendmsg);
 
 int sock_no_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
 		    size_t len, int flags)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_recvmsg);
 
 int sock_no_mmap(struct file *file, struct socket *sock, struct vm_area_struct *vma)
 {
 	/* Mirror missing mmap method error code */
 	return -ENODEV;
 }
+EXPORT_SYMBOL(sock_no_mmap);
 
 ssize_t sock_no_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags)
 {
@@ -1660,6 +1704,7 @@ ssize_t sock_no_sendpage(struct socket *sock, struct page *page, int offset, siz
 	kunmap(page);
 	return res;
 }
+EXPORT_SYMBOL(sock_no_sendpage);
 
 /*
  *	Default Socket Callbacks
@@ -1723,6 +1768,7 @@ void sk_send_sigurg(struct sock *sk)
 		if (send_sigurg(&sk->sk_socket->file->f_owner))
 			sk_wake_async(sk, SOCK_WAKE_URG, POLL_PRI);
 }
+EXPORT_SYMBOL(sk_send_sigurg);
 
 void sk_reset_timer(struct sock *sk, struct timer_list* timer,
 		    unsigned long expires)
@@ -1730,7 +1776,6 @@ void sk_reset_timer(struct sock *sk, struct timer_list* timer,
 	if (!mod_timer(timer, expires))
 		sock_hold(sk);
 }
-
 EXPORT_SYMBOL(sk_reset_timer);
 
 void sk_stop_timer(struct sock *sk, struct timer_list* timer)
@@ -1738,7 +1783,6 @@ void sk_stop_timer(struct sock *sk, struct timer_list* timer)
 	if (timer_pending(timer) && del_timer(timer))
 		__sock_put(sk);
 }
-
 EXPORT_SYMBOL(sk_stop_timer);
 
 void sock_init_data(struct socket *sock, struct sock *sk)
@@ -1795,8 +1839,10 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 	sk->sk_stamp = ktime_set(-1L, 0);
 
 	atomic_set(&sk->sk_refcnt, 1);
+	atomic_set(&sk->sk_wmem_alloc, 1);
 	atomic_set(&sk->sk_drops, 0);
 }
+EXPORT_SYMBOL(sock_init_data);
 
 void lock_sock_nested(struct sock *sk, int subclass)
 {
@@ -1812,7 +1858,6 @@ void lock_sock_nested(struct sock *sk, int subclass)
 	mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
 	local_bh_enable();
 }
-
 EXPORT_SYMBOL(lock_sock_nested);
 
 void release_sock(struct sock *sk)
@@ -1895,7 +1940,6 @@ int sock_common_getsockopt(struct socket *sock, int level, int optname,
 
 	return sk->sk_prot->getsockopt(sk, level, optname, optval, optlen);
 }
-
 EXPORT_SYMBOL(sock_common_getsockopt);
 
 #ifdef CONFIG_COMPAT
@@ -1925,7 +1969,6 @@ int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock,
 		msg->msg_namelen = addr_len;
 	return err;
 }
-
 EXPORT_SYMBOL(sock_common_recvmsg);
 
 /*
@@ -1938,7 +1981,6 @@ int sock_common_setsockopt(struct socket *sock, int level, int optname,
 
 	return sk->sk_prot->setsockopt(sk, level, optname, optval, optlen);
 }
-
 EXPORT_SYMBOL(sock_common_setsockopt);
 
 #ifdef CONFIG_COMPAT
@@ -1989,7 +2031,6 @@ void sk_common_release(struct sock *sk)
 	sk_refcnt_debug_release(sk);
 	sock_put(sk);
 }
-
 EXPORT_SYMBOL(sk_common_release);
 
 static DEFINE_RWLOCK(proto_list_lock);
@@ -2171,7 +2212,6 @@ out_free_sock_slab:
 out:
 	return -ENOBUFS;
 }
-
 EXPORT_SYMBOL(proto_register);
 
 void proto_unregister(struct proto *prot)
@@ -2198,7 +2238,6 @@ void proto_unregister(struct proto *prot)
 		prot->twsk_prot->twsk_slab = NULL;
 	}
 }
-
 EXPORT_SYMBOL(proto_unregister);
 
 #ifdef CONFIG_PROC_FS
@@ -2324,33 +2363,3 @@ static int __init proto_init(void)
 subsys_initcall(proto_init);
 
 #endif /* PROC_FS */
-
-EXPORT_SYMBOL(sk_alloc);
-EXPORT_SYMBOL(sk_free);
-EXPORT_SYMBOL(sk_send_sigurg);
-EXPORT_SYMBOL(sock_alloc_send_skb);
-EXPORT_SYMBOL(sock_init_data);
-EXPORT_SYMBOL(sock_kfree_s);
-EXPORT_SYMBOL(sock_kmalloc);
-EXPORT_SYMBOL(sock_no_accept);
-EXPORT_SYMBOL(sock_no_bind);
-EXPORT_SYMBOL(sock_no_connect);
-EXPORT_SYMBOL(sock_no_getname);
-EXPORT_SYMBOL(sock_no_getsockopt);
-EXPORT_SYMBOL(sock_no_ioctl);
-EXPORT_SYMBOL(sock_no_listen);
-EXPORT_SYMBOL(sock_no_mmap);
-EXPORT_SYMBOL(sock_no_poll);
-EXPORT_SYMBOL(sock_no_recvmsg);
-EXPORT_SYMBOL(sock_no_sendmsg);
-EXPORT_SYMBOL(sock_no_sendpage);
-EXPORT_SYMBOL(sock_no_setsockopt);
-EXPORT_SYMBOL(sock_no_shutdown);
-EXPORT_SYMBOL(sock_no_socketpair);
-EXPORT_SYMBOL(sock_rfree);
-EXPORT_SYMBOL(sock_setsockopt);
-EXPORT_SYMBOL(sock_wfree);
-EXPORT_SYMBOL(sock_wmalloc);
-EXPORT_SYMBOL(sock_i_uid);
-EXPORT_SYMBOL(sock_i_ino);
-EXPORT_SYMBOL(sysctl_optmem_max);
diff --git a/net/core/stream.c b/net/core/stream.c
index 8727cead64a..a37debfeb1b 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -33,7 +33,8 @@ void sk_stream_write_space(struct sock *sk)
 		clear_bit(SOCK_NOSPACE, &sock->flags);
 
 		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
-			wake_up_interruptible(sk->sk_sleep);
+			wake_up_interruptible_poll(sk->sk_sleep, POLLOUT |
+						POLLWRNORM | POLLWRBAND);
 		if (sock->fasync_list && !(sk->sk_shutdown & SEND_SHUTDOWN))
 			sock_wake_async(sock, SOCK_WAKE_SPACE, POLL_OUT);
 	}
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 164b090d5ac..25d717ebc92 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -51,6 +51,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	dma_cookie_t cookie = 0;
 
 	/* Copy header. */
@@ -94,31 +95,28 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			copy = end - offset;
-			if (copy > 0) {
-				if (copy > len)
-					copy = len;
-				cookie = dma_skb_copy_datagram_iovec(chan, list,
-						offset - start, to, copy,
-						pinned_list);
-				if (cookie < 0)
-					goto fault;
-				len -= copy;
-				if (len == 0)
-					goto end;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		copy = end - offset;
+		if (copy > 0) {
+			if (copy > len)
+				copy = len;
+			cookie = dma_skb_copy_datagram_iovec(chan, frag_iter,
+							     offset - start,
+							     to, copy,
+							     pinned_list);
+			if (cookie < 0)
+				goto fault;
+			len -= copy;
+			if (len == 0)
+				goto end;
+			offset += copy;
 		}
+		start = end;
 	}
 
 end:
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index d1dd95289b8..a0a36c9e6cc 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -452,7 +452,7 @@ static struct dst_entry* dccp_v4_route_skb(struct net *net, struct sock *sk,
 					   struct sk_buff *skb)
 {
 	struct rtable *rt;
-	struct flowi fl = { .oif = skb->rtable->rt_iif,
+	struct flowi fl = { .oif = skb_rtable(skb)->rt_iif,
 			    .nl_u = { .ip4_u =
 				      { .daddr = ip_hdr(skb)->saddr,
 					.saddr = ip_hdr(skb)->daddr,
@@ -507,14 +507,14 @@ static void dccp_v4_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	const struct iphdr *rxiph;
 	struct sk_buff *skb;
 	struct dst_entry *dst;
-	struct net *net = dev_net(rxskb->dst->dev);
+	struct net *net = dev_net(skb_dst(rxskb)->dev);
 	struct sock *ctl_sk = net->dccp.v4_ctl_sk;
 
 	/* Never send a reset in response to a reset. */
 	if (dccp_hdr(rxskb)->dccph_type == DCCP_PKT_RESET)
 		return;
 
-	if (rxskb->rtable->rt_type != RTN_LOCAL)
+	if (skb_rtable(rxskb)->rt_type != RTN_LOCAL)
 		return;
 
 	dst = dccp_v4_route_skb(net, ctl_sk, rxskb);
@@ -528,7 +528,7 @@ static void dccp_v4_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	rxiph = ip_hdr(rxskb);
 	dccp_hdr(skb)->dccph_checksum = dccp_v4_csum_finish(skb, rxiph->saddr,
 								 rxiph->daddr);
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	bh_lock_sock(ctl_sk);
 	err = ip_build_and_send_pkt(skb, ctl_sk,
@@ -567,7 +567,7 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 	struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
 
 	/* Never answer to DCCP_PKT_REQUESTs send to broadcast or multicast */
-	if (skb->rtable->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+	if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
 		return 0;	/* discard, don't send a reset here */
 
 	if (dccp_bad_service_code(sk, service)) {
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index b963f35c65f..05ea7440d9e 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -314,8 +314,9 @@ static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	struct ipv6hdr *rxip6h;
 	struct sk_buff *skb;
 	struct flowi fl;
-	struct net *net = dev_net(rxskb->dst->dev);
+	struct net *net = dev_net(skb_dst(rxskb)->dev);
 	struct sock *ctl_sk = net->dccp.v6_ctl_sk;
+	struct dst_entry *dst;
 
 	if (dccp_hdr(rxskb)->dccph_type == DCCP_PKT_RESET)
 		return;
@@ -342,8 +343,9 @@ static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	security_skb_classify_flow(rxskb, &fl);
 
 	/* sk = NULL, but it is safe for now. RST socket required. */
-	if (!ip6_dst_lookup(ctl_sk, &skb->dst, &fl)) {
-		if (xfrm_lookup(net, &skb->dst, &fl, NULL, 0) >= 0) {
+	if (!ip6_dst_lookup(ctl_sk, &dst, &fl)) {
+		if (xfrm_lookup(net, &dst, &fl, NULL, 0) >= 0) {
+			skb_dst_set(skb, dst);
 			ip6_xmit(ctl_sk, skb, &fl, NULL, 0);
 			DCCP_INC_STATS_BH(DCCP_MIB_OUTSEGS);
 			DCCP_INC_STATS_BH(DCCP_MIB_OUTRSTS);
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 36bcc00654d..c0e88c16d08 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -350,7 +350,7 @@ struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst,
 	/* Reserve space for headers. */
 	skb_reserve(skb, sk->sk_prot->max_header);
 
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	dreq = dccp_rsk(req);
 	if (inet_rsk(req)->acked)	/* increase ISS upon retransmission */
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 9647d911f91..a5e3a593e47 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1075,6 +1075,7 @@ static int dn_accept(struct socket *sock, struct socket *newsock, int flags)
 	int err = 0;
 	unsigned char type;
 	long timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK);
+	struct dst_entry *dst;
 
 	lock_sock(sk);
 
@@ -1102,8 +1103,9 @@ static int dn_accept(struct socket *sock, struct socket *newsock, int flags)
 	}
 	release_sock(sk);
 
-	dst_release(xchg(&newsk->sk_dst_cache, skb->dst));
-	skb->dst = NULL;
+	dst = skb_dst(skb);
+	dst_release(xchg(&newsk->sk_dst_cache, dst));
+	skb_dst_set(skb, NULL);
 
 	DN_SK(newsk)->state        = DN_CR;
 	DN_SK(newsk)->addrrem      = cb->src_port;
@@ -1250,14 +1252,8 @@ static int dn_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		if (skb) {
 			amount = skb->len;
 		} else {
-			skb = sk->sk_receive_queue.next;
-			for (;;) {
-				if (skb ==
-				    (struct sk_buff *)&sk->sk_receive_queue)
-					break;
+			skb_queue_walk(&sk->sk_receive_queue, skb)
 				amount += skb->len;
-				skb = skb->next;
-			}
 		}
 		release_sock(sk);
 		err = put_user(amount, (int __user *)arg);
@@ -1644,13 +1640,13 @@ static int __dn_getsockopt(struct socket *sock, int level,int optname, char __us
 
 static int dn_data_ready(struct sock *sk, struct sk_buff_head *q, int flags, int target)
 {
-	struct sk_buff *skb = q->next;
+	struct sk_buff *skb;
 	int len = 0;
 
 	if (flags & MSG_OOB)
 		return !skb_queue_empty(q) ? 1 : 0;
 
-	while(skb != (struct sk_buff *)q) {
+	skb_queue_walk(q, skb) {
 		struct dn_skb_cb *cb = DN_SKB_CB(skb);
 		len += skb->len;
 
@@ -1666,8 +1662,6 @@ static int dn_data_ready(struct sock *sk, struct sk_buff_head *q, int flags, int
 		/* minimum data length for read exceeded */
 		if (len >= target)
 			return 1;
-
-		skb = skb->next;
 	}
 
 	return 0;
@@ -1683,7 +1677,7 @@ static int dn_recvmsg(struct kiocb *iocb, struct socket *sock,
 	size_t target = size > 1 ? 1 : 0;
 	size_t copied = 0;
 	int rv = 0;
-	struct sk_buff *skb, *nskb;
+	struct sk_buff *skb, *n;
 	struct dn_skb_cb *cb = NULL;
 	unsigned char eor = 0;
 	long timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
@@ -1758,7 +1752,7 @@ static int dn_recvmsg(struct kiocb *iocb, struct socket *sock,
 		finish_wait(sk->sk_sleep, &wait);
 	}
 
-	for(skb = queue->next; skb != (struct sk_buff *)queue; skb = nskb) {
+	skb_queue_walk_safe(queue, skb, n) {
 		unsigned int chunk = skb->len;
 		cb = DN_SKB_CB(skb);
 
@@ -1775,7 +1769,6 @@ static int dn_recvmsg(struct kiocb *iocb, struct socket *sock,
 			skb_pull(skb, chunk);
 
 		eor = cb->nsp_flags & 0x40;
-		nskb = skb->next;
 
 		if (skb->len == 0) {
 			skb_unlink(skb, queue);
diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c
index 05b5aa05e50..923786bd6d0 100644
--- a/net/decnet/dn_neigh.c
+++ b/net/decnet/dn_neigh.c
@@ -204,7 +204,7 @@ static void dn_short_error_report(struct neighbour *neigh, struct sk_buff *skb)
 
 static int dn_neigh_output_packet(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct dn_route *rt = (struct dn_route *)dst;
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
@@ -224,7 +224,7 @@ static int dn_neigh_output_packet(struct sk_buff *skb)
 
 static int dn_long_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 	int headroom = dev->hard_header_len + sizeof(struct dn_long_packet) + 3;
@@ -270,7 +270,7 @@ static int dn_long_output(struct sk_buff *skb)
 
 static int dn_short_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 	int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2;
@@ -313,7 +313,7 @@ static int dn_short_output(struct sk_buff *skb)
  */
 static int dn_phase3_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 	int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2;
diff --git a/net/decnet/dn_nsp_in.c b/net/decnet/dn_nsp_in.c
index 5d8a2a56fd3..932408dca86 100644
--- a/net/decnet/dn_nsp_in.c
+++ b/net/decnet/dn_nsp_in.c
@@ -578,6 +578,7 @@ out:
 static __inline__ int dn_queue_skb(struct sock *sk, struct sk_buff *skb, int sig, struct sk_buff_head *queue)
 {
 	int err;
+	int skb_len;
 
 	/* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
 	   number of warnings when compiling with -W --ANK
@@ -592,22 +593,12 @@ static __inline__ int dn_queue_skb(struct sock *sk, struct sk_buff *skb, int sig
 	if (err)
 		goto out;
 
+	skb_len = skb->len;
 	skb_set_owner_r(skb, sk);
 	skb_queue_tail(queue, skb);
 
-	/* This code only runs from BH or BH protected context.
-	 * Therefore the plain read_lock is ok here. -DaveM
-	 */
-	read_lock(&sk->sk_callback_lock);
-	if (!sock_flag(sk, SOCK_DEAD)) {
-		struct socket *sock = sk->sk_socket;
-		wake_up_interruptible(sk->sk_sleep);
-		if (sock && sock->fasync_list &&
-		    !test_bit(SOCK_ASYNC_WAITDATA, &sock->flags))
-			__kill_fasync(sock->fasync_list, sig,
-				    (sig == SIGURG) ? POLL_PRI : POLL_IN);
-	}
-	read_unlock(&sk->sk_callback_lock);
+	if (!sock_flag(sk, SOCK_DEAD))
+		sk->sk_data_ready(sk, skb_len);
 out:
 	return err;
 }
diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c
index 2013c25b7f5..a65e929ce76 100644
--- a/net/decnet/dn_nsp_out.c
+++ b/net/decnet/dn_nsp_out.c
@@ -85,7 +85,7 @@ static void dn_nsp_send(struct sk_buff *skb)
 	dst = sk_dst_check(sk, 0);
 	if (dst) {
 try_again:
-		skb->dst = dst;
+		skb_dst_set(skb, dst);
 		dst_output(skb);
 		return;
 	}
@@ -382,7 +382,7 @@ int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff
 {
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
 	struct dn_scp *scp = DN_SK(sk);
-	struct sk_buff *skb2, *list, *ack = NULL;
+	struct sk_buff *skb2, *n, *ack = NULL;
 	int wakeup = 0;
 	int try_retrans = 0;
 	unsigned long reftime = cb->stamp;
@@ -390,9 +390,7 @@ int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff
 	unsigned short xmit_count;
 	unsigned short segnum;
 
-	skb2 = q->next;
-	list = (struct sk_buff *)q;
-	while(list != skb2) {
+	skb_queue_walk_safe(q, skb2, n) {
 		struct dn_skb_cb *cb2 = DN_SKB_CB(skb2);
 
 		if (dn_before_or_equal(cb2->segnum, acknum))
@@ -400,8 +398,6 @@ int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff
 
 		/* printk(KERN_DEBUG "ack: %s %04x %04x\n", ack ? "ACK" : "SKIP", (int)cb2->segnum, (int)acknum); */
 
-		skb2 = skb2->next;
-
 		if (ack == NULL)
 			continue;
 
@@ -586,7 +582,7 @@ static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg,
 	 * to be able to send disc packets out which have no socket
 	 * associations.
 	 */
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 	dst_output(skb);
 }
 
@@ -615,7 +611,7 @@ void dn_nsp_return_disc(struct sk_buff *skb, unsigned char msgflg,
 	int ddl = 0;
 	gfp_t gfp = GFP_ATOMIC;
 
-	dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb->dst, ddl,
+	dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb_dst(skb), ddl,
 			NULL, cb->src_port, cb->dst_port);
 }
 
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 0cc4394117d..1d6ca8a98dc 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -678,7 +678,7 @@ out:
 
 static int dn_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct dn_route *rt = (struct dn_route *)dst;
 	struct net_device *dev = dst->dev;
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
@@ -717,7 +717,7 @@ error:
 static int dn_forward(struct sk_buff *skb)
 {
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct dn_dev *dn_db = dst->dev->dn_ptr;
 	struct dn_route *rt;
 	struct neighbour *neigh = dst->neighbour;
@@ -730,7 +730,7 @@ static int dn_forward(struct sk_buff *skb)
 		goto drop;
 
 	/* Ensure that we have enough space for headers */
-	rt = (struct dn_route *)skb->dst;
+	rt = (struct dn_route *)skb_dst(skb);
 	header_len = dn_db->use_long ? 21 : 6;
 	if (skb_cow(skb, LL_RESERVED_SPACE(rt->u.dst.dev)+header_len))
 		goto drop;
@@ -1392,7 +1392,8 @@ make_route:
 		goto e_neighbour;
 
 	hash = dn_hash(rt->fl.fld_src, rt->fl.fld_dst);
-	dn_insert_route(rt, hash, (struct dn_route **)&skb->dst);
+	dn_insert_route(rt, hash, &rt);
+	skb_dst_set(skb, &rt->u.dst);
 
 done:
 	if (neigh)
@@ -1424,7 +1425,7 @@ static int dn_route_input(struct sk_buff *skb)
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
 	unsigned hash = dn_hash(cb->src, cb->dst);
 
-	if (skb->dst)
+	if (skb_dst(skb))
 		return 0;
 
 	rcu_read_lock();
@@ -1437,7 +1438,7 @@ static int dn_route_input(struct sk_buff *skb)
 		    (rt->fl.iif == cb->iif)) {
 			dst_use(&rt->u.dst, jiffies);
 			rcu_read_unlock();
-			skb->dst = (struct dst_entry *)rt;
+			skb_dst_set(skb, (struct dst_entry *)rt);
 			return 0;
 		}
 	}
@@ -1449,7 +1450,7 @@ static int dn_route_input(struct sk_buff *skb)
 static int dn_rt_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 			   int event, int nowait, unsigned int flags)
 {
-	struct dn_route *rt = (struct dn_route *)skb->dst;
+	struct dn_route *rt = (struct dn_route *)skb_dst(skb);
 	struct rtmsg *r;
 	struct nlmsghdr *nlh;
 	unsigned char *b = skb_tail_pointer(skb);
@@ -1554,7 +1555,7 @@ static int dn_cache_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh, void
 		err = dn_route_input(skb);
 		local_bh_enable();
 		memset(cb, 0, sizeof(struct dn_skb_cb));
-		rt = (struct dn_route *)skb->dst;
+		rt = (struct dn_route *)skb_dst(skb);
 		if (!err && -rt->u.dst.error)
 			err = rt->u.dst.error;
 	} else {
@@ -1570,7 +1571,7 @@ static int dn_cache_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh, void
 	skb->dev = NULL;
 	if (err)
 		goto out_free;
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 	if (rtm->rtm_flags & RTM_F_NOTIFY)
 		rt->rt_flags |= RTCF_NOTIFY;
 
@@ -1622,15 +1623,15 @@ int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb)
 			rt = rcu_dereference(rt->u.dst.dn_next), idx++) {
 			if (idx < s_idx)
 				continue;
-			skb->dst = dst_clone(&rt->u.dst);
+			skb_dst_set(skb, dst_clone(&rt->u.dst));
 			if (dn_rt_fill_info(skb, NETLINK_CB(cb->skb).pid,
 					cb->nlh->nlmsg_seq, RTM_NEWROUTE,
 					1, NLM_F_MULTI) <= 0) {
-				dst_release(xchg(&skb->dst, NULL));
+				skb_dst_drop(skb);
 				rcu_read_unlock_bh();
 				goto done;
 			}
-			dst_release(xchg(&skb->dst, NULL));
+			skb_dst_drop(skb);
 		}
 		rcu_read_unlock_bh();
 	}
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index 14fbca55e90..72495f25269 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -115,7 +115,7 @@ static int dn_fib_rule_match(struct fib_rule *rule, struct flowi *fl, int flags)
 }
 
 static int dn_fib_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
-				 struct nlmsghdr *nlh, struct fib_rule_hdr *frh,
+				 struct fib_rule_hdr *frh,
 				 struct nlattr **tb)
 {
 	int err = -EINVAL;
@@ -192,7 +192,7 @@ unsigned dnet_addr_type(__le16 addr)
 }
 
 static int dn_fib_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
-			    struct nlmsghdr *nlh, struct fib_rule_hdr *frh)
+			    struct fib_rule_hdr *frh)
 {
 	struct dn_fib_rule *r = (struct dn_fib_rule *)rule;
 
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index ed131181215..2175e6d5cc8 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -67,7 +67,7 @@ static int dsa_slave_open(struct net_device *dev)
 		return -ENETDOWN;
 
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr)) {
-		err = dev_unicast_add(master, dev->dev_addr, ETH_ALEN);
+		err = dev_unicast_add(master, dev->dev_addr);
 		if (err < 0)
 			goto out;
 	}
@@ -90,7 +90,7 @@ clear_allmulti:
 		dev_set_allmulti(master, -1);
 del_unicast:
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
-		dev_unicast_delete(master, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(master, dev->dev_addr);
 out:
 	return err;
 }
@@ -108,7 +108,7 @@ static int dsa_slave_close(struct net_device *dev)
 		dev_set_promiscuity(master, -1);
 
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
-		dev_unicast_delete(master, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(master, dev->dev_addr);
 
 	return 0;
 }
@@ -147,13 +147,13 @@ static int dsa_slave_set_mac_address(struct net_device *dev, void *a)
 		goto out;
 
 	if (compare_ether_addr(addr->sa_data, master->dev_addr)) {
-		err = dev_unicast_add(master, addr->sa_data, ETH_ALEN);
+		err = dev_unicast_add(master, addr->sa_data);
 		if (err < 0)
 			return err;
 	}
 
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
-		dev_unicast_delete(master, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(master, dev->dev_addr);
 
 out:
 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 6f479fa522c..8121bf0029e 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -901,15 +901,10 @@ static void aun_tx_ack(unsigned long seq, int result)
 	struct ec_cb *eb;
 
 	spin_lock_irqsave(&aun_queue_lock, flags);
-	skb = skb_peek(&aun_queue);
-	while (skb && skb != (struct sk_buff *)&aun_queue)
-	{
-		struct sk_buff *newskb = skb->next;
+	skb_queue_walk(&aun_queue, skb) {
 		eb = (struct ec_cb *)&skb->cb;
 		if (eb->seq == seq)
 			goto foundit;
-
-		skb = newskb;
 	}
 	spin_unlock_irqrestore(&aun_queue_lock, flags);
 	printk(KERN_DEBUG "AUN: unknown sequence %ld\n", seq);
@@ -982,23 +977,18 @@ static void aun_data_available(struct sock *sk, int slen)
 
 static void ab_cleanup(unsigned long h)
 {
-	struct sk_buff *skb;
+	struct sk_buff *skb, *n;
 	unsigned long flags;
 
 	spin_lock_irqsave(&aun_queue_lock, flags);
-	skb = skb_peek(&aun_queue);
-	while (skb && skb != (struct sk_buff *)&aun_queue)
-	{
-		struct sk_buff *newskb = skb->next;
+	skb_queue_walk_safe(&aun_queue, skb, n) {
 		struct ec_cb *eb = (struct ec_cb *)&skb->cb;
-		if ((jiffies - eb->start) > eb->timeout)
-		{
+		if ((jiffies - eb->start) > eb->timeout) {
 			tx_result(skb->sk, eb->cookie,
 				  ECTYPE_TRANSMIT_NOT_PRESENT);
 			skb_unlink(skb, &aun_queue);
 			kfree_skb(skb);
 		}
-		skb = newskb;
 	}
 	spin_unlock_irqrestore(&aun_queue_lock, flags);
 
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 280352aba40..5a883affecd 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -337,11 +337,6 @@ const struct header_ops eth_header_ops ____cacheline_aligned = {
 void ether_setup(struct net_device *dev)
 {
 	dev->header_ops		= &eth_header_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu		= eth_change_mtu;
-	dev->set_mac_address 	= eth_mac_addr;
-	dev->validate_addr	= eth_validate_addr;
-#endif
 	dev->type		= ARPHRD_ETHER;
 	dev->hard_header_len 	= ETH_HLEN;
 	dev->mtu		= ETH_DATA_LEN;
diff --git a/net/ieee802154/Kconfig b/net/ieee802154/Kconfig
new file mode 100644
index 00000000000..1c1de97d264
--- /dev/null
+++ b/net/ieee802154/Kconfig
@@ -0,0 +1,12 @@
+config IEEE802154
+	tristate "IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  IEEE Std 802.15.4 defines a low data rate, low power and low
+	  complexity short range wireless personal area networks. It was
+	  designed to organise networks of sensors, switches, etc automation
+	  devices. Maximum allowed data rate is 250 kb/s and typical personal
+	  operating space around 10m.
+
+	  Say Y here to compile LR-WPAN support into the kernel or say M to
+	  compile it as modules.
diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile
new file mode 100644
index 00000000000..f99338a2610
--- /dev/null
+++ b/net/ieee802154/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_IEEE802154) +=	nl802154.o af_802154.o
+nl802154-y		:= netlink.o nl_policy.o
+af_802154-y		:= af_ieee802154.o raw.o dgram.o
+
+ccflags-y += -Wall -DDEBUG
diff --git a/net/ieee802154/af802154.h b/net/ieee802154/af802154.h
new file mode 100644
index 00000000000..b1ec5253752
--- /dev/null
+++ b/net/ieee802154/af802154.h
@@ -0,0 +1,36 @@
+/*
+ * Internal interfaces for ieee 802.15.4 address family.
+ *
+ * Copyright 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef AF802154_H
+#define AF802154_H
+
+struct sk_buff;
+struct net_devce;
+extern struct proto ieee802154_raw_prot;
+extern struct proto ieee802154_dgram_prot;
+void ieee802154_raw_deliver(struct net_device *dev, struct sk_buff *skb);
+int ieee802154_dgram_deliver(struct net_device *dev, struct sk_buff *skb);
+struct net_device *ieee802154_get_dev(struct net *net,
+		struct ieee802154_addr *addr);
+
+#endif
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
new file mode 100644
index 00000000000..882a927cefa
--- /dev/null
+++ b/net/ieee802154/af_ieee802154.c
@@ -0,0 +1,372 @@
+/*
+ * IEEE802154.4 socket interface
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ */
+
+#include <linux/net.h>
+#include <linux/capability.h>
+#include <linux/module.h>
+#include <linux/if_arp.h>
+#include <linux/if.h>
+#include <linux/termios.h>	/* For TIOCOUTQ/INQ */
+#include <linux/list.h>
+#include <net/datalink.h>
+#include <net/psnap.h>
+#include <net/sock.h>
+#include <net/tcp_states.h>
+#include <net/route.h>
+
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/netdevice.h>
+
+#include "af802154.h"
+
+#define DBG_DUMP(data, len) { \
+	int i; \
+	pr_debug("function: %s: data: len %d:\n", __func__, len); \
+	for (i = 0; i < len; i++) {\
+		pr_debug("%02x: %02x\n", i, (data)[i]); \
+	} \
+}
+
+/*
+ * Utility function for families
+ */
+struct net_device *ieee802154_get_dev(struct net *net,
+		struct ieee802154_addr *addr)
+{
+	struct net_device *dev = NULL;
+	struct net_device *tmp;
+	u16 pan_id, short_addr;
+
+	switch (addr->addr_type) {
+	case IEEE802154_ADDR_LONG:
+		rtnl_lock();
+		dev = dev_getbyhwaddr(net, ARPHRD_IEEE802154, addr->hwaddr);
+		if (dev)
+			dev_hold(dev);
+		rtnl_unlock();
+		break;
+	case IEEE802154_ADDR_SHORT:
+		if (addr->pan_id == 0xffff ||
+		    addr->short_addr == IEEE802154_ADDR_UNDEF ||
+		    addr->short_addr == 0xffff)
+			break;
+
+		rtnl_lock();
+
+		for_each_netdev(net, tmp) {
+			if (tmp->type != ARPHRD_IEEE802154)
+				continue;
+
+			pan_id = ieee802154_mlme_ops(tmp)->get_pan_id(tmp);
+			short_addr =
+				ieee802154_mlme_ops(tmp)->get_short_addr(tmp);
+
+			if (pan_id == addr->pan_id &&
+			    short_addr == addr->short_addr) {
+				dev = tmp;
+				dev_hold(dev);
+				break;
+			}
+		}
+
+		rtnl_unlock();
+		break;
+	default:
+		pr_warning("Unsupported ieee802154 address type: %d\n",
+				addr->addr_type);
+		break;
+	}
+
+	return dev;
+}
+
+static int ieee802154_sock_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	if (sk) {
+		sock->sk = NULL;
+		sk->sk_prot->close(sk, 0);
+	}
+	return 0;
+}
+static int ieee802154_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+		struct msghdr *msg, size_t len)
+{
+	struct sock *sk = sock->sk;
+
+	return sk->sk_prot->sendmsg(iocb, sk, msg, len);
+}
+
+static int ieee802154_sock_bind(struct socket *sock, struct sockaddr *uaddr,
+		int addr_len)
+{
+	struct sock *sk = sock->sk;
+
+	if (sk->sk_prot->bind)
+		return sk->sk_prot->bind(sk, uaddr, addr_len);
+
+	return sock_no_bind(sock, uaddr, addr_len);
+}
+
+static int ieee802154_sock_connect(struct socket *sock, struct sockaddr *uaddr,
+			int addr_len, int flags)
+{
+	struct sock *sk = sock->sk;
+
+	if (uaddr->sa_family == AF_UNSPEC)
+		return sk->sk_prot->disconnect(sk, flags);
+
+	return sk->sk_prot->connect(sk, uaddr, addr_len);
+}
+
+static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg,
+		unsigned int cmd)
+{
+	struct ifreq ifr;
+	int ret = -EINVAL;
+	struct net_device *dev;
+
+	if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
+		return -EFAULT;
+
+	ifr.ifr_name[IFNAMSIZ-1] = 0;
+
+	dev_load(sock_net(sk), ifr.ifr_name);
+	dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
+	if (dev->type == ARPHRD_IEEE802154 ||
+	    dev->type == ARPHRD_IEEE802154_PHY)
+		ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
+
+	if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq)))
+		ret = -EFAULT;
+	dev_put(dev);
+
+	return ret;
+}
+
+static int ieee802154_sock_ioctl(struct socket *sock, unsigned int cmd,
+		unsigned long arg)
+{
+	struct sock *sk = sock->sk;
+
+	switch (cmd) {
+	case SIOCGSTAMP:
+		return sock_get_timestamp(sk, (struct timeval __user *)arg);
+	case SIOCGSTAMPNS:
+		return sock_get_timestampns(sk, (struct timespec __user *)arg);
+	case SIOCGIFADDR:
+	case SIOCSIFADDR:
+		return ieee802154_dev_ioctl(sk, (struct ifreq __user *)arg,
+				cmd);
+	default:
+		if (!sk->sk_prot->ioctl)
+			return -ENOIOCTLCMD;
+		return sk->sk_prot->ioctl(sk, cmd, arg);
+	}
+}
+
+static const struct proto_ops ieee802154_raw_ops = {
+	.family		   = PF_IEEE802154,
+	.owner		   = THIS_MODULE,
+	.release	   = ieee802154_sock_release,
+	.bind		   = ieee802154_sock_bind,
+	.connect	   = ieee802154_sock_connect,
+	.socketpair	   = sock_no_socketpair,
+	.accept		   = sock_no_accept,
+	.getname	   = sock_no_getname,
+	.poll		   = datagram_poll,
+	.ioctl		   = ieee802154_sock_ioctl,
+	.listen		   = sock_no_listen,
+	.shutdown	   = sock_no_shutdown,
+	.setsockopt	   = sock_common_setsockopt,
+	.getsockopt	   = sock_common_getsockopt,
+	.sendmsg	   = ieee802154_sock_sendmsg,
+	.recvmsg	   = sock_common_recvmsg,
+	.mmap		   = sock_no_mmap,
+	.sendpage	   = sock_no_sendpage,
+#ifdef CONFIG_COMPAT
+	.compat_setsockopt = compat_sock_common_setsockopt,
+	.compat_getsockopt = compat_sock_common_getsockopt,
+#endif
+};
+
+static const struct proto_ops ieee802154_dgram_ops = {
+	.family		   = PF_IEEE802154,
+	.owner		   = THIS_MODULE,
+	.release	   = ieee802154_sock_release,
+	.bind		   = ieee802154_sock_bind,
+	.connect	   = ieee802154_sock_connect,
+	.socketpair	   = sock_no_socketpair,
+	.accept		   = sock_no_accept,
+	.getname	   = sock_no_getname,
+	.poll		   = datagram_poll,
+	.ioctl		   = ieee802154_sock_ioctl,
+	.listen		   = sock_no_listen,
+	.shutdown	   = sock_no_shutdown,
+	.setsockopt	   = sock_common_setsockopt,
+	.getsockopt	   = sock_common_getsockopt,
+	.sendmsg	   = ieee802154_sock_sendmsg,
+	.recvmsg	   = sock_common_recvmsg,
+	.mmap		   = sock_no_mmap,
+	.sendpage	   = sock_no_sendpage,
+#ifdef CONFIG_COMPAT
+	.compat_setsockopt = compat_sock_common_setsockopt,
+	.compat_getsockopt = compat_sock_common_getsockopt,
+#endif
+};
+
+
+/*
+ * Create a socket. Initialise the socket, blank the addresses
+ * set the state.
+ */
+static int ieee802154_create(struct net *net, struct socket *sock,
+		int protocol)
+{
+	struct sock *sk;
+	int rc;
+	struct proto *proto;
+	const struct proto_ops *ops;
+
+	if (net != &init_net)
+		return -EAFNOSUPPORT;
+
+	switch (sock->type) {
+	case SOCK_RAW:
+		proto = &ieee802154_raw_prot;
+		ops = &ieee802154_raw_ops;
+		break;
+	case SOCK_DGRAM:
+		proto = &ieee802154_dgram_prot;
+		ops = &ieee802154_dgram_ops;
+		break;
+	default:
+		rc = -ESOCKTNOSUPPORT;
+		goto out;
+	}
+
+	rc = -ENOMEM;
+	sk = sk_alloc(net, PF_IEEE802154, GFP_KERNEL, proto);
+	if (!sk)
+		goto out;
+	rc = 0;
+
+	sock->ops = ops;
+
+	sock_init_data(sock, sk);
+	/* FIXME: sk->sk_destruct */
+	sk->sk_family = PF_IEEE802154;
+
+	/* Checksums on by default */
+	sock_set_flag(sk, SOCK_ZAPPED);
+
+	if (sk->sk_prot->hash)
+		sk->sk_prot->hash(sk);
+
+	if (sk->sk_prot->init) {
+		rc = sk->sk_prot->init(sk);
+		if (rc)
+			sk_common_release(sk);
+	}
+out:
+	return rc;
+}
+
+static struct net_proto_family ieee802154_family_ops = {
+	.family		= PF_IEEE802154,
+	.create		= ieee802154_create,
+	.owner		= THIS_MODULE,
+};
+
+static int ieee802154_rcv(struct sk_buff *skb, struct net_device *dev,
+	struct packet_type *pt, struct net_device *orig_dev)
+{
+	DBG_DUMP(skb->data, skb->len);
+	if (!netif_running(dev))
+		return -ENODEV;
+	pr_debug("got frame, type %d, dev %p\n", dev->type, dev);
+
+	if (!net_eq(dev_net(dev), &init_net))
+		goto drop;
+
+	ieee802154_raw_deliver(dev, skb);
+
+	if (dev->type != ARPHRD_IEEE802154)
+		goto drop;
+
+	if (skb->pkt_type != PACKET_OTHERHOST)
+		return ieee802154_dgram_deliver(dev, skb);
+
+drop:
+	kfree_skb(skb);
+	return NET_RX_DROP;
+}
+
+
+static struct packet_type ieee802154_packet_type = {
+	.type = __constant_htons(ETH_P_IEEE802154),
+	.func = ieee802154_rcv,
+};
+
+static int __init af_ieee802154_init(void)
+{
+	int rc = -EINVAL;
+
+	rc = proto_register(&ieee802154_raw_prot, 1);
+	if (rc)
+		goto out;
+
+	rc = proto_register(&ieee802154_dgram_prot, 1);
+	if (rc)
+		goto err_dgram;
+
+	/* Tell SOCKET that we are alive */
+	rc = sock_register(&ieee802154_family_ops);
+	if (rc)
+		goto err_sock;
+	dev_add_pack(&ieee802154_packet_type);
+
+	rc = 0;
+	goto out;
+
+err_sock:
+	proto_unregister(&ieee802154_dgram_prot);
+err_dgram:
+	proto_unregister(&ieee802154_raw_prot);
+out:
+	return rc;
+}
+static void __exit af_ieee802154_remove(void)
+{
+	dev_remove_pack(&ieee802154_packet_type);
+	sock_unregister(PF_IEEE802154);
+	proto_unregister(&ieee802154_dgram_prot);
+	proto_unregister(&ieee802154_raw_prot);
+}
+
+module_init(af_ieee802154_init);
+module_exit(af_ieee802154_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_NETPROTO(PF_IEEE802154);
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
new file mode 100644
index 00000000000..1779677aed4
--- /dev/null
+++ b/net/ieee802154/dgram.c
@@ -0,0 +1,394 @@
+/*
+ * ZigBee socket interface
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#include <linux/net.h>
+#include <linux/module.h>
+#include <linux/if_arp.h>
+#include <linux/list.h>
+#include <net/sock.h>
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/mac_def.h>
+#include <net/ieee802154/netdevice.h>
+
+#include <asm/ioctls.h>
+
+#include "af802154.h"
+
+static HLIST_HEAD(dgram_head);
+static DEFINE_RWLOCK(dgram_lock);
+
+struct dgram_sock {
+	struct sock sk;
+
+	int bound;
+	struct ieee802154_addr src_addr;
+	struct ieee802154_addr dst_addr;
+};
+
+static inline struct dgram_sock *dgram_sk(const struct sock *sk)
+{
+	return container_of(sk, struct dgram_sock, sk);
+}
+
+
+static void dgram_hash(struct sock *sk)
+{
+	write_lock_bh(&dgram_lock);
+	sk_add_node(sk, &dgram_head);
+	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+	write_unlock_bh(&dgram_lock);
+}
+
+static void dgram_unhash(struct sock *sk)
+{
+	write_lock_bh(&dgram_lock);
+	if (sk_del_node_init(sk))
+		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+	write_unlock_bh(&dgram_lock);
+}
+
+static int dgram_init(struct sock *sk)
+{
+	struct dgram_sock *ro = dgram_sk(sk);
+
+	ro->dst_addr.addr_type = IEEE802154_ADDR_LONG;
+	ro->dst_addr.pan_id = 0xffff;
+	memset(&ro->dst_addr.hwaddr, 0xff, sizeof(ro->dst_addr.hwaddr));
+	return 0;
+}
+
+static void dgram_close(struct sock *sk, long timeout)
+{
+	sk_common_release(sk);
+}
+
+static int dgram_bind(struct sock *sk, struct sockaddr *uaddr, int len)
+{
+	struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
+	struct dgram_sock *ro = dgram_sk(sk);
+	int err = 0;
+	struct net_device *dev;
+
+	ro->bound = 0;
+
+	if (len < sizeof(*addr))
+		return -EINVAL;
+
+	if (addr->family != AF_IEEE802154)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	dev = ieee802154_get_dev(sock_net(sk), &addr->addr);
+	if (!dev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	if (dev->type != ARPHRD_IEEE802154) {
+		err = -ENODEV;
+		goto out_put;
+	}
+
+	memcpy(&ro->src_addr, &addr->addr, sizeof(struct ieee802154_addr));
+
+	ro->bound = 1;
+out_put:
+	dev_put(dev);
+out:
+	release_sock(sk);
+
+	return err;
+}
+
+static int dgram_ioctl(struct sock *sk, int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCOUTQ:
+	{
+		int amount = atomic_read(&sk->sk_wmem_alloc);
+		return put_user(amount, (int __user *)arg);
+	}
+
+	case SIOCINQ:
+	{
+		struct sk_buff *skb;
+		unsigned long amount;
+
+		amount = 0;
+		spin_lock_bh(&sk->sk_receive_queue.lock);
+		skb = skb_peek(&sk->sk_receive_queue);
+		if (skb != NULL) {
+			/*
+			 * We will only return the amount
+			 * of this packet since that is all
+			 * that will be read.
+			 */
+			/* FIXME: parse the header for more correct value */
+			amount = skb->len - (3+8+8);
+		}
+		spin_unlock_bh(&sk->sk_receive_queue.lock);
+		return put_user(amount, (int __user *)arg);
+	}
+
+	}
+	return -ENOIOCTLCMD;
+}
+
+/* FIXME: autobind */
+static int dgram_connect(struct sock *sk, struct sockaddr *uaddr,
+			int len)
+{
+	struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
+	struct dgram_sock *ro = dgram_sk(sk);
+	int err = 0;
+
+	if (len < sizeof(*addr))
+		return -EINVAL;
+
+	if (addr->family != AF_IEEE802154)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	if (!ro->bound) {
+		err = -ENETUNREACH;
+		goto out;
+	}
+
+	memcpy(&ro->dst_addr, &addr->addr, sizeof(struct ieee802154_addr));
+
+out:
+	release_sock(sk);
+	return err;
+}
+
+static int dgram_disconnect(struct sock *sk, int flags)
+{
+	struct dgram_sock *ro = dgram_sk(sk);
+
+	lock_sock(sk);
+
+	ro->dst_addr.addr_type = IEEE802154_ADDR_LONG;
+	memset(&ro->dst_addr.hwaddr, 0xff, sizeof(ro->dst_addr.hwaddr));
+
+	release_sock(sk);
+
+	return 0;
+}
+
+static int dgram_sendmsg(struct kiocb *iocb, struct sock *sk,
+		struct msghdr *msg, size_t size)
+{
+	struct net_device *dev;
+	unsigned mtu;
+	struct sk_buff *skb;
+	struct dgram_sock *ro = dgram_sk(sk);
+	int err;
+
+	if (msg->msg_flags & MSG_OOB) {
+		pr_debug("msg->msg_flags = 0x%x\n", msg->msg_flags);
+		return -EOPNOTSUPP;
+	}
+
+	if (!ro->bound)
+		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
+	else
+		dev = ieee802154_get_dev(sock_net(sk), &ro->src_addr);
+
+	if (!dev) {
+		pr_debug("no dev\n");
+		err = -ENXIO;
+		goto out;
+	}
+	mtu = dev->mtu;
+	pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+
+	skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + size,
+			msg->msg_flags & MSG_DONTWAIT,
+			&err);
+	if (!skb)
+		goto out_dev;
+
+	skb_reserve(skb, LL_RESERVED_SPACE(dev));
+
+	skb_reset_network_header(skb);
+
+	mac_cb(skb)->flags = IEEE802154_FC_TYPE_DATA | MAC_CB_FLAG_ACKREQ;
+	mac_cb(skb)->seq = ieee802154_mlme_ops(dev)->get_dsn(dev);
+	err = dev_hard_header(skb, dev, ETH_P_IEEE802154, &ro->dst_addr,
+			ro->bound ? &ro->src_addr : NULL, size);
+	if (err < 0)
+		goto out_skb;
+
+	skb_reset_mac_header(skb);
+
+	err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
+	if (err < 0)
+		goto out_skb;
+
+	if (size > mtu) {
+		pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+		err = -EINVAL;
+		goto out_skb;
+	}
+
+	skb->dev = dev;
+	skb->sk  = sk;
+	skb->protocol = htons(ETH_P_IEEE802154);
+
+	dev_put(dev);
+
+	err = dev_queue_xmit(skb);
+	if (err > 0)
+		err = net_xmit_errno(err);
+
+	return err ?: size;
+
+out_skb:
+	kfree_skb(skb);
+out_dev:
+	dev_put(dev);
+out:
+	return err;
+}
+
+static int dgram_recvmsg(struct kiocb *iocb, struct sock *sk,
+		struct msghdr *msg, size_t len, int noblock, int flags,
+		int *addr_len)
+{
+	size_t copied = 0;
+	int err = -EOPNOTSUPP;
+	struct sk_buff *skb;
+
+	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	if (!skb)
+		goto out;
+
+	copied = skb->len;
+	if (len < copied) {
+		msg->msg_flags |= MSG_TRUNC;
+		copied = len;
+	}
+
+	/* FIXME: skip headers if necessary ?! */
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+	if (err)
+		goto done;
+
+	sock_recv_timestamp(msg, sk, skb);
+
+	if (flags & MSG_TRUNC)
+		copied = skb->len;
+done:
+	skb_free_datagram(sk, skb);
+out:
+	if (err)
+		return err;
+	return copied;
+}
+
+static int dgram_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
+		atomic_inc(&sk->sk_drops);
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
+	return NET_RX_SUCCESS;
+}
+
+static inline int ieee802154_match_sock(u8 *hw_addr, u16 pan_id,
+		u16 short_addr, struct dgram_sock *ro)
+{
+	if (!ro->bound)
+		return 1;
+
+	if (ro->src_addr.addr_type == IEEE802154_ADDR_LONG &&
+	    !memcmp(ro->src_addr.hwaddr, hw_addr, IEEE802154_ADDR_LEN))
+		return 1;
+
+	if (ro->src_addr.addr_type == IEEE802154_ADDR_SHORT &&
+		     pan_id == ro->src_addr.pan_id &&
+		     short_addr == ro->src_addr.short_addr)
+		return 1;
+
+	return 0;
+}
+
+int ieee802154_dgram_deliver(struct net_device *dev, struct sk_buff *skb)
+{
+	struct sock *sk, *prev = NULL;
+	struct hlist_node *node;
+	int ret = NET_RX_SUCCESS;
+	u16 pan_id, short_addr;
+
+	/* Data frame processing */
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+	short_addr = ieee802154_mlme_ops(dev)->get_short_addr(dev);
+
+	read_lock(&dgram_lock);
+	sk_for_each(sk, node, &dgram_head) {
+		if (ieee802154_match_sock(dev->dev_addr, pan_id, short_addr,
+					dgram_sk(sk))) {
+			if (prev) {
+				struct sk_buff *clone;
+				clone = skb_clone(skb, GFP_ATOMIC);
+				if (clone)
+					dgram_rcv_skb(prev, clone);
+			}
+
+			prev = sk;
+		}
+	}
+
+	if (prev)
+		dgram_rcv_skb(prev, skb);
+	else {
+		kfree_skb(skb);
+		ret = NET_RX_DROP;
+	}
+	read_unlock(&dgram_lock);
+
+	return ret;
+}
+
+struct proto ieee802154_dgram_prot = {
+	.name		= "IEEE-802.15.4-MAC",
+	.owner		= THIS_MODULE,
+	.obj_size	= sizeof(struct dgram_sock),
+	.init		= dgram_init,
+	.close		= dgram_close,
+	.bind		= dgram_bind,
+	.sendmsg	= dgram_sendmsg,
+	.recvmsg	= dgram_recvmsg,
+	.hash		= dgram_hash,
+	.unhash		= dgram_unhash,
+	.connect	= dgram_connect,
+	.disconnect	= dgram_disconnect,
+	.ioctl		= dgram_ioctl,
+};
+
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
new file mode 100644
index 00000000000..105ad10876a
--- /dev/null
+++ b/net/ieee802154/netlink.c
@@ -0,0 +1,523 @@
+/*
+ * Netlink inteface for IEEE 802.15.4 stack
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <net/netlink.h>
+#include <net/genetlink.h>
+#include <linux/nl802154.h>
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/nl802154.h>
+#include <net/ieee802154/netdevice.h>
+
+static unsigned int ieee802154_seq_num;
+
+static struct genl_family ieee802154_coordinator_family = {
+	.id		= GENL_ID_GENERATE,
+	.hdrsize	= 0,
+	.name		= IEEE802154_NL_NAME,
+	.version	= 1,
+	.maxattr	= IEEE802154_ATTR_MAX,
+};
+
+static struct genl_multicast_group ieee802154_coord_mcgrp = {
+	.name		= IEEE802154_MCAST_COORD_NAME,
+};
+
+static struct genl_multicast_group ieee802154_beacon_mcgrp = {
+	.name		= IEEE802154_MCAST_BEACON_NAME,
+};
+
+/* Requests to userspace */
+static struct sk_buff *ieee802154_nl_create(int flags, u8 req)
+{
+	void *hdr;
+	struct sk_buff *msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+
+	if (!msg)
+		return NULL;
+
+	hdr = genlmsg_put(msg, 0, ieee802154_seq_num++,
+			&ieee802154_coordinator_family, flags, req);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return NULL;
+	}
+
+	return msg;
+}
+
+static int ieee802154_nl_finish(struct sk_buff *msg)
+{
+	/* XXX: nlh is right at the start of msg */
+	void *hdr = genlmsg_data(NLMSG_DATA(msg->data));
+
+	if (!genlmsg_end(msg, hdr))
+		goto out;
+
+	return genlmsg_multicast(msg, 0, ieee802154_coord_mcgrp.id,
+			GFP_ATOMIC);
+out:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 cap)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	if (addr->addr_type != IEEE802154_ADDR_LONG) {
+		pr_err("%s: received non-long source address!\n", __func__);
+		return -EINVAL;
+	}
+
+	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
+			addr->hwaddr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_CAPABILITY, cap);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_assoc_indic);
+
+int ieee802154_nl_assoc_confirm(struct net_device *dev, u16 short_addr,
+		u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR, short_addr);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_assoc_confirm);
+
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	if (addr->addr_type == IEEE802154_ADDR_LONG)
+		NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
+				addr->hwaddr);
+	else
+		NLA_PUT_U16(msg, IEEE802154_ATTR_SRC_SHORT_ADDR,
+				addr->short_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_REASON, reason);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_disassoc_indic);
+
+int ieee802154_nl_disassoc_confirm(struct net_device *dev, u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_disassoc_confirm);
+
+int ieee802154_nl_beacon_indic(struct net_device *dev,
+		u16 panid, u16 coord_addr)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_BEACON_NOTIFY_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_SHORT_ADDR, coord_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_PAN_ID, panid);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_beacon_indic);
+
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+		u8 status, u8 scan_type, u32 unscanned,
+		u8 *edl/* , struct list_head *pan_desc_list */)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_SCAN_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, scan_type);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, unscanned);
+
+	if (edl)
+		NLA_PUT(msg, IEEE802154_ATTR_ED_LIST, 27, edl);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_scan_confirm);
+
+/* Requests from userspace */
+static struct net_device *ieee802154_nl_get_dev(struct genl_info *info)
+{
+	struct net_device *dev;
+
+	if (info->attrs[IEEE802154_ATTR_DEV_NAME]) {
+		char name[IFNAMSIZ + 1];
+		nla_strlcpy(name, info->attrs[IEEE802154_ATTR_DEV_NAME],
+				sizeof(name));
+		dev = dev_get_by_name(&init_net, name);
+	} else if (info->attrs[IEEE802154_ATTR_DEV_INDEX])
+		dev = dev_get_by_index(&init_net,
+				nla_get_u32(info->attrs[IEEE802154_ATTR_DEV_INDEX]));
+	else
+		return NULL;
+
+	if (dev->type != ARPHRD_IEEE802154) {
+		dev_put(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int ieee802154_associate_req(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if (!info->attrs[IEEE802154_ATTR_CHANNEL] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
+	    (!info->attrs[IEEE802154_ATTR_COORD_HW_ADDR] &&
+		!info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]) ||
+	    !info->attrs[IEEE802154_ATTR_CAPABILITY])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	if (info->attrs[IEEE802154_ATTR_COORD_HW_ADDR]) {
+		addr.addr_type = IEEE802154_ADDR_LONG;
+		nla_memcpy(addr.hwaddr,
+				info->attrs[IEEE802154_ATTR_COORD_HW_ADDR],
+				IEEE802154_ADDR_LEN);
+	} else {
+		addr.addr_type = IEEE802154_ADDR_SHORT;
+		addr.short_addr = nla_get_u16(
+				info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
+	}
+	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+
+	ret = ieee802154_mlme_ops(dev)->assoc_req(dev, &addr,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]),
+			nla_get_u8(info->attrs[IEEE802154_ATTR_CAPABILITY]));
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_associate_resp(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if (!info->attrs[IEEE802154_ATTR_STATUS] ||
+	    !info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] ||
+	    !info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	addr.addr_type = IEEE802154_ADDR_LONG;
+	nla_memcpy(addr.hwaddr, info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
+			IEEE802154_ADDR_LEN);
+	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+
+
+	ret = ieee802154_mlme_ops(dev)->assoc_resp(dev, &addr,
+		nla_get_u16(info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]),
+		nla_get_u8(info->attrs[IEEE802154_ATTR_STATUS]));
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_disassociate_req(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if ((!info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] &&
+		!info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]) ||
+	    !info->attrs[IEEE802154_ATTR_REASON])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	if (info->attrs[IEEE802154_ATTR_DEST_HW_ADDR]) {
+		addr.addr_type = IEEE802154_ADDR_LONG;
+		nla_memcpy(addr.hwaddr,
+				info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
+				IEEE802154_ADDR_LEN);
+	} else {
+		addr.addr_type = IEEE802154_ADDR_SHORT;
+		addr.short_addr = nla_get_u16(
+				info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]);
+	}
+	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+
+	ret = ieee802154_mlme_ops(dev)->disassoc_req(dev, &addr,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_REASON]));
+
+	dev_put(dev);
+	return ret;
+}
+
+/*
+ * PANid, channel, beacon_order = 15, superframe_order = 15,
+ * PAN_coordinator, battery_life_extension = 0,
+ * coord_realignment = 0, security_enable = 0
+*/
+static int ieee802154_start_req(struct sk_buff *skb, struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+
+	u8 channel, bcn_ord, sf_ord;
+	int pan_coord, blx, coord_realign;
+	int ret;
+
+	if (!info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR] ||
+	    !info->attrs[IEEE802154_ATTR_CHANNEL] ||
+	    !info->attrs[IEEE802154_ATTR_BCN_ORD] ||
+	    !info->attrs[IEEE802154_ATTR_SF_ORD] ||
+	    !info->attrs[IEEE802154_ATTR_PAN_COORD] ||
+	    !info->attrs[IEEE802154_ATTR_BAT_EXT] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_REALIGN]
+	 )
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	addr.addr_type = IEEE802154_ADDR_SHORT;
+	addr.short_addr = nla_get_u16(
+			info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
+	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+
+	channel = nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]);
+	bcn_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_BCN_ORD]);
+	sf_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_SF_ORD]);
+	pan_coord = nla_get_u8(info->attrs[IEEE802154_ATTR_PAN_COORD]);
+	blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
+	coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
+
+	ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel,
+		bcn_ord, sf_ord, pan_coord, blx, coord_realign);
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_scan_req(struct sk_buff *skb, struct genl_info *info)
+{
+	struct net_device *dev;
+	int ret;
+	u8 type;
+	u32 channels;
+	u8 duration;
+
+	if (!info->attrs[IEEE802154_ATTR_SCAN_TYPE] ||
+	    !info->attrs[IEEE802154_ATTR_CHANNELS] ||
+	    !info->attrs[IEEE802154_ATTR_DURATION])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	type = nla_get_u8(info->attrs[IEEE802154_ATTR_SCAN_TYPE]);
+	channels = nla_get_u32(info->attrs[IEEE802154_ATTR_CHANNELS]);
+	duration = nla_get_u8(info->attrs[IEEE802154_ATTR_DURATION]);
+
+	ret = ieee802154_mlme_ops(dev)->scan_req(dev, type, channels,
+			duration);
+
+	dev_put(dev);
+	return ret;
+}
+
+#define IEEE802154_OP(_cmd, _func)			\
+	{						\
+		.cmd	= _cmd,				\
+		.policy	= ieee802154_policy,		\
+		.doit	= _func,			\
+		.dumpit	= NULL,				\
+		.flags	= GENL_ADMIN_PERM,		\
+	}
+
+static struct genl_ops ieee802154_coordinator_ops[] = {
+	IEEE802154_OP(IEEE802154_ASSOCIATE_REQ, ieee802154_associate_req),
+	IEEE802154_OP(IEEE802154_ASSOCIATE_RESP, ieee802154_associate_resp),
+	IEEE802154_OP(IEEE802154_DISASSOCIATE_REQ, ieee802154_disassociate_req),
+	IEEE802154_OP(IEEE802154_SCAN_REQ, ieee802154_scan_req),
+	IEEE802154_OP(IEEE802154_START_REQ, ieee802154_start_req),
+};
+
+static int __init ieee802154_nl_init(void)
+{
+	int rc;
+	int i;
+
+	rc = genl_register_family(&ieee802154_coordinator_family);
+	if (rc)
+		goto fail;
+
+	rc = genl_register_mc_group(&ieee802154_coordinator_family,
+			&ieee802154_coord_mcgrp);
+	if (rc)
+		goto fail;
+
+	rc = genl_register_mc_group(&ieee802154_coordinator_family,
+			&ieee802154_beacon_mcgrp);
+	if (rc)
+		goto fail;
+
+
+	for (i = 0; i < ARRAY_SIZE(ieee802154_coordinator_ops); i++) {
+		rc = genl_register_ops(&ieee802154_coordinator_family,
+				&ieee802154_coordinator_ops[i]);
+		if (rc)
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	genl_unregister_family(&ieee802154_coordinator_family);
+	return rc;
+}
+module_init(ieee802154_nl_init);
+
+static void __exit ieee802154_nl_exit(void)
+{
+	genl_unregister_family(&ieee802154_coordinator_family);
+}
+module_exit(ieee802154_nl_exit);
+
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
new file mode 100644
index 00000000000..c7d71d1adca
--- /dev/null
+++ b/net/ieee802154/nl_policy.c
@@ -0,0 +1,52 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <net/netlink.h>
+#include <linux/nl802154.h>
+
+#define NLA_HW_ADDR NLA_U64
+
+struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
+	[IEEE802154_ATTR_DEV_NAME] = { .type = NLA_STRING, },
+	[IEEE802154_ATTR_DEV_INDEX] = { .type = NLA_U32, },
+
+	[IEEE802154_ATTR_STATUS] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_PAN_ID] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_CHANNEL] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_COORD_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_COORD_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_COORD_PAN_ID] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_SRC_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_SRC_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_SRC_PAN_ID] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_DEST_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_DEST_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_DEST_PAN_ID] = { .type = NLA_U16, },
+
+	[IEEE802154_ATTR_CAPABILITY] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_REASON] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_SCAN_TYPE] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_CHANNELS] = { .type = NLA_U32, },
+	[IEEE802154_ATTR_DURATION] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_ED_LIST] = { .len = 27 },
+};
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
new file mode 100644
index 00000000000..fca44d59f97
--- /dev/null
+++ b/net/ieee802154/raw.c
@@ -0,0 +1,254 @@
+/*
+ * Raw IEEE 802.15.4 sockets
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#include <linux/net.h>
+#include <linux/module.h>
+#include <linux/if_arp.h>
+#include <linux/list.h>
+#include <net/sock.h>
+#include <net/ieee802154/af_ieee802154.h>
+
+#include "af802154.h"
+
+static HLIST_HEAD(raw_head);
+static DEFINE_RWLOCK(raw_lock);
+
+static void raw_hash(struct sock *sk)
+{
+	write_lock_bh(&raw_lock);
+	sk_add_node(sk, &raw_head);
+	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+	write_unlock_bh(&raw_lock);
+}
+
+static void raw_unhash(struct sock *sk)
+{
+	write_lock_bh(&raw_lock);
+	if (sk_del_node_init(sk))
+		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+	write_unlock_bh(&raw_lock);
+}
+
+static void raw_close(struct sock *sk, long timeout)
+{
+	sk_common_release(sk);
+}
+
+static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int len)
+{
+	struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
+	int err = 0;
+	struct net_device *dev = NULL;
+
+	if (len < sizeof(*addr))
+		return -EINVAL;
+
+	if (addr->family != AF_IEEE802154)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	dev = ieee802154_get_dev(sock_net(sk), &addr->addr);
+	if (!dev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	if (dev->type != ARPHRD_IEEE802154_PHY &&
+	    dev->type != ARPHRD_IEEE802154) {
+		err = -ENODEV;
+		goto out_put;
+	}
+
+	sk->sk_bound_dev_if = dev->ifindex;
+	sk_dst_reset(sk);
+
+out_put:
+	dev_put(dev);
+out:
+	release_sock(sk);
+
+	return err;
+}
+
+static int raw_connect(struct sock *sk, struct sockaddr *uaddr,
+			int addr_len)
+{
+	return -ENOTSUPP;
+}
+
+static int raw_disconnect(struct sock *sk, int flags)
+{
+	return 0;
+}
+
+static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		       size_t size)
+{
+	struct net_device *dev;
+	unsigned mtu;
+	struct sk_buff *skb;
+	int err;
+
+	if (msg->msg_flags & MSG_OOB) {
+		pr_debug("msg->msg_flags = 0x%x\n", msg->msg_flags);
+		return -EOPNOTSUPP;
+	}
+
+	lock_sock(sk);
+	if (!sk->sk_bound_dev_if)
+		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
+	else
+		dev = dev_get_by_index(sock_net(sk), sk->sk_bound_dev_if);
+	release_sock(sk);
+
+	if (!dev) {
+		pr_debug("no dev\n");
+		err = -ENXIO;
+		goto out;
+	}
+
+	mtu = dev->mtu;
+	pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+
+	if (size > mtu) {
+		pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+		err = -EINVAL;
+		goto out_dev;
+	}
+
+	skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + size,
+			msg->msg_flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		goto out_dev;
+
+	skb_reserve(skb, LL_RESERVED_SPACE(dev));
+
+	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+
+	err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
+	if (err < 0)
+		goto out_skb;
+
+	skb->dev = dev;
+	skb->sk  = sk;
+	skb->protocol = htons(ETH_P_IEEE802154);
+
+	dev_put(dev);
+
+	err = dev_queue_xmit(skb);
+	if (err > 0)
+		err = net_xmit_errno(err);
+
+	return err ?: size;
+
+out_skb:
+	kfree_skb(skb);
+out_dev:
+	dev_put(dev);
+out:
+	return err;
+}
+
+static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		       size_t len, int noblock, int flags, int *addr_len)
+{
+	size_t copied = 0;
+	int err = -EOPNOTSUPP;
+	struct sk_buff *skb;
+
+	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	if (!skb)
+		goto out;
+
+	copied = skb->len;
+	if (len < copied) {
+		msg->msg_flags |= MSG_TRUNC;
+		copied = len;
+	}
+
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+	if (err)
+		goto done;
+
+	sock_recv_timestamp(msg, sk, skb);
+
+	if (flags & MSG_TRUNC)
+		copied = skb->len;
+done:
+	skb_free_datagram(sk, skb);
+out:
+	if (err)
+		return err;
+	return copied;
+}
+
+static int raw_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
+		atomic_inc(&sk->sk_drops);
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
+	return NET_RX_SUCCESS;
+}
+
+
+void ieee802154_raw_deliver(struct net_device *dev, struct sk_buff *skb)
+{
+	struct sock *sk;
+	struct hlist_node *node;
+
+	read_lock(&raw_lock);
+	sk_for_each(sk, node, &raw_head) {
+		bh_lock_sock(sk);
+		if (!sk->sk_bound_dev_if ||
+		    sk->sk_bound_dev_if == dev->ifindex) {
+
+			struct sk_buff *clone;
+
+			clone = skb_clone(skb, GFP_ATOMIC);
+			if (clone)
+				raw_rcv_skb(sk, clone);
+		}
+		bh_unlock_sock(sk);
+	}
+	read_unlock(&raw_lock);
+}
+
+struct proto ieee802154_raw_prot = {
+	.name		= "IEEE-802.15.4-RAW",
+	.owner		= THIS_MODULE,
+	.obj_size	= sizeof(struct sock),
+	.close		= raw_close,
+	.bind		= raw_bind,
+	.sendmsg	= raw_sendmsg,
+	.recvmsg	= raw_recvmsg,
+	.hash		= raw_hash,
+	.unhash		= raw_unhash,
+	.connect	= raw_connect,
+	.disconnect	= raw_disconnect,
+};
+
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 5b919f7b45d..70491d9035e 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -273,29 +273,20 @@ config IP_PIMSM_V2
 	  you want to play with it.
 
 config ARPD
-	bool "IP: ARP daemon support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "IP: ARP daemon support"
 	---help---
-	  Normally, the kernel maintains an internal cache which maps IP
-	  addresses to hardware addresses on the local network, so that
-	  Ethernet/Token Ring/ etc. frames are sent to the proper address on
-	  the physical networking layer. For small networks having a few
-	  hundred directly connected hosts or less, keeping this address
-	  resolution (ARP) cache inside the kernel works well. However,
-	  maintaining an internal ARP cache does not work well for very large
-	  switched networks, and will use a lot of kernel memory if TCP/IP
-	  connections are made to many machines on the network.
-
-	  If you say Y here, the kernel's internal ARP cache will never grow
-	  to more than 256 entries (the oldest entries are expired in a LIFO
-	  manner) and communication will be attempted with the user space ARP
-	  daemon arpd. Arpd then answers the address resolution request either
-	  from its own cache or by asking the net.
-
-	  This code is experimental and also obsolete. If you want to use it,
-	  you need to find a version of the daemon arpd on the net somewhere,
-	  and you should also say Y to "Kernel/User network link driver",
-	  below. If unsure, say N.
+	  The kernel maintains an internal cache which maps IP addresses to
+	  hardware addresses on the local network, so that Ethernet/Token Ring/
+	  etc. frames are sent to the proper address on the physical networking
+	  layer. Normally, kernel uses the ARP protocol to resolve these
+	  mappings.
+
+	  Saying Y here adds support to have an user space daemon to do this
+	  resolution instead. This is useful for implementing an alternate
+	  address resolution protocol (e.g. NHRP on mGRE tunnels) and also for
+	  testing purposes.
+
+	  If unsure, say N.
 
 config SYN_COOKIES
 	bool "IP: TCP syncookie support (disabled per default)"
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 7f03373b8c0..566ea6c4321 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -116,7 +116,6 @@
 #include <linux/mroute.h>
 #endif
 
-extern void ip_mc_drop_socket(struct sock *sk);
 
 /* The inetsw table contains everything that inet_create needs to
  * build a new socket.
@@ -375,6 +374,7 @@ lookup_protocol:
 	inet->uc_ttl	= -1;
 	inet->mc_loop	= 1;
 	inet->mc_ttl	= 1;
+	inet->mc_all	= 1;
 	inet->mc_index	= 0;
 	inet->mc_list	= NULL;
 
@@ -1003,8 +1003,6 @@ void inet_register_protosw(struct inet_protosw *p)
 out:
 	spin_unlock_bh(&inetsw_lock);
 
-	synchronize_net();
-
 	return;
 
 out_permanent:
@@ -1248,13 +1246,20 @@ static struct sk_buff **inet_gro_receive(struct sk_buff **head,
 	struct sk_buff **pp = NULL;
 	struct sk_buff *p;
 	struct iphdr *iph;
+	unsigned int hlen;
+	unsigned int off;
+	unsigned int id;
 	int flush = 1;
 	int proto;
-	int id;
 
-	iph = skb_gro_header(skb, sizeof(*iph));
-	if (unlikely(!iph))
-		goto out;
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*iph);
+	iph = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		iph = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!iph))
+			goto out;
+	}
 
 	proto = iph->protocol & (MAX_INET_PROTOS - 1);
 
@@ -1269,9 +1274,9 @@ static struct sk_buff **inet_gro_receive(struct sk_buff **head,
 	if (unlikely(ip_fast_csum((u8 *)iph, iph->ihl)))
 		goto out_unlock;
 
-	flush = ntohs(iph->tot_len) != skb_gro_len(skb) ||
-		iph->frag_off != htons(IP_DF);
-	id = ntohs(iph->id);
+	id = ntohl(*(u32 *)&iph->id);
+	flush = (u16)((ntohl(*(u32 *)iph) ^ skb_gro_len(skb)) | (id ^ IP_DF));
+	id >>= 16;
 
 	for (p = *head; p; p = p->next) {
 		struct iphdr *iph2;
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index f11931c1838..8a3881e28ac 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -468,13 +468,13 @@ int arp_find(unsigned char *haddr, struct sk_buff *skb)
 	__be32 paddr;
 	struct neighbour *n;
 
-	if (!skb->dst) {
+	if (!skb_dst(skb)) {
 		printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
 		kfree_skb(skb);
 		return 1;
 	}
 
-	paddr = skb->rtable->rt_gateway;
+	paddr = skb_rtable(skb)->rt_gateway;
 
 	if (arp_set_predefined(inet_addr_type(dev_net(dev), paddr), haddr, paddr, dev))
 		return 0;
@@ -817,7 +817,7 @@ static int arp_process(struct sk_buff *skb)
 	if (arp->ar_op == htons(ARPOP_REQUEST) &&
 	    ip_route_input(skb, tip, sip, 0, dev) == 0) {
 
-		rt = skb->rtable;
+		rt = skb_rtable(skb);
 		addr_type = rt->rt_type;
 
 		if (addr_type == RTN_LOCAL) {
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 126bb911880..3863c3a4223 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1347,7 +1347,8 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write,
 		struct net *net = ctl->extra2;
 
 		if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) {
-			rtnl_lock();
+			if (!rtnl_trylock())
+				return restart_syscall();
 			if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) {
 				inet_forward_change(net);
 			} else if (*valp) {
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index cafcc49d099..e2f95059256 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -40,7 +40,6 @@
 #include <net/route.h>
 #include <net/tcp.h>
 #include <net/sock.h>
-#include <net/icmp.h>
 #include <net/arp.h>
 #include <net/ip_fib.h>
 #include <net/rtnetlink.h>
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index ded8c44fb84..ecd39454235 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -263,7 +263,6 @@ fn_hash_lookup(struct fib_table *tb, const struct flowi *flp, struct fib_result
 
 			err = fib_semantic_match(&f->fn_alias,
 						 flp, res,
-						 f->fn_key, fz->fz_mask,
 						 fz->fz_order);
 			if (err <= 0)
 				goto out;
diff --git a/net/ipv4/fib_lookup.h b/net/ipv4/fib_lookup.h
index 2c1623d2768..637b133973b 100644
--- a/net/ipv4/fib_lookup.h
+++ b/net/ipv4/fib_lookup.h
@@ -22,8 +22,7 @@ struct fib_alias {
 /* Exported by fib_semantics.c */
 extern int fib_semantic_match(struct list_head *head,
 			      const struct flowi *flp,
-			      struct fib_result *res, __be32 zone, __be32 mask,
-				int prefixlen);
+			      struct fib_result *res, int prefixlen);
 extern void fib_release_info(struct fib_info *);
 extern struct fib_info *fib_create_info(struct fib_config *cfg);
 extern int fib_nh_match(struct fib_config *cfg, struct fib_info *fi);
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index 6080d712082..92d9d97ec5e 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -134,7 +134,7 @@ static const struct nla_policy fib4_rule_policy[FRA_MAX+1] = {
 };
 
 static int fib4_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
-			       struct nlmsghdr *nlh, struct fib_rule_hdr *frh,
+			       struct fib_rule_hdr *frh,
 			       struct nlattr **tb)
 {
 	struct net *net = sock_net(skb->sk);
@@ -209,7 +209,7 @@ static int fib4_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh,
 }
 
 static int fib4_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
-			  struct nlmsghdr *nlh, struct fib_rule_hdr *frh)
+			  struct fib_rule_hdr *frh)
 {
 	struct fib4_rule *rule4 = (struct fib4_rule *) rule;
 
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index f831df50090..9b096d6ff3f 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -866,8 +866,7 @@ failure:
 
 /* Note! fib_semantic_match intentionally uses  RCU list functions. */
 int fib_semantic_match(struct list_head *head, const struct flowi *flp,
-		       struct fib_result *res, __be32 zone, __be32 mask,
-			int prefixlen)
+		       struct fib_result *res, int prefixlen)
 {
 	struct fib_alias *fa;
 	int nh_sel = 0;
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 33c7c85dfe4..d1a39b1277d 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -123,6 +123,7 @@ struct tnode {
 	union {
 		struct rcu_head rcu;
 		struct work_struct work;
+		struct tnode *tnode_free;
 	};
 	struct node *child[0];
 };
@@ -161,6 +162,8 @@ static void tnode_put_child_reorg(struct tnode *tn, int i, struct node *n,
 static struct node *resize(struct trie *t, struct tnode *tn);
 static struct tnode *inflate(struct trie *t, struct tnode *tn);
 static struct tnode *halve(struct trie *t, struct tnode *tn);
+/* tnodes to free after resize(); protected by RTNL */
+static struct tnode *tnode_free_head;
 
 static struct kmem_cache *fn_alias_kmem __read_mostly;
 static struct kmem_cache *trie_leaf_kmem __read_mostly;
@@ -385,6 +388,29 @@ static inline void tnode_free(struct tnode *tn)
 		call_rcu(&tn->rcu, __tnode_free_rcu);
 }
 
+static void tnode_free_safe(struct tnode *tn)
+{
+	BUG_ON(IS_LEAF(tn));
+
+	if (node_parent((struct node *) tn)) {
+		tn->tnode_free = tnode_free_head;
+		tnode_free_head = tn;
+	} else {
+		tnode_free(tn);
+	}
+}
+
+static void tnode_free_flush(void)
+{
+	struct tnode *tn;
+
+	while ((tn = tnode_free_head)) {
+		tnode_free_head = tn->tnode_free;
+		tn->tnode_free = NULL;
+		tnode_free(tn);
+	}
+}
+
 static struct leaf *leaf_new(void)
 {
 	struct leaf *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
@@ -495,7 +521,7 @@ static struct node *resize(struct trie *t, struct tnode *tn)
 
 	/* No children */
 	if (tn->empty_children == tnode_child_length(tn)) {
-		tnode_free(tn);
+		tnode_free_safe(tn);
 		return NULL;
 	}
 	/* One child */
@@ -509,7 +535,7 @@ static struct node *resize(struct trie *t, struct tnode *tn)
 
 			/* compress one level */
 			node_set_parent(n, NULL);
-			tnode_free(tn);
+			tnode_free_safe(tn);
 			return n;
 		}
 	/*
@@ -670,7 +696,7 @@ static struct node *resize(struct trie *t, struct tnode *tn)
 			/* compress one level */
 
 			node_set_parent(n, NULL);
-			tnode_free(tn);
+			tnode_free_safe(tn);
 			return n;
 		}
 
@@ -756,7 +782,7 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 			put_child(t, tn, 2*i, inode->child[0]);
 			put_child(t, tn, 2*i+1, inode->child[1]);
 
-			tnode_free(inode);
+			tnode_free_safe(inode);
 			continue;
 		}
 
@@ -801,9 +827,9 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 		put_child(t, tn, 2*i, resize(t, left));
 		put_child(t, tn, 2*i+1, resize(t, right));
 
-		tnode_free(inode);
+		tnode_free_safe(inode);
 	}
-	tnode_free(oldtnode);
+	tnode_free_safe(oldtnode);
 	return tn;
 nomem:
 	{
@@ -885,7 +911,7 @@ static struct tnode *halve(struct trie *t, struct tnode *tn)
 		put_child(t, newBinNode, 1, right);
 		put_child(t, tn, i/2, resize(t, newBinNode));
 	}
-	tnode_free(oldtnode);
+	tnode_free_safe(oldtnode);
 	return tn;
 nomem:
 	{
@@ -989,7 +1015,6 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 	t_key cindex, key;
 	struct tnode *tp;
 
-	preempt_disable();
 	key = tn->key;
 
 	while (tn != NULL && (tp = node_parent((struct node *)tn)) != NULL) {
@@ -1001,16 +1026,18 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 				      (struct node *)tn, wasfull);
 
 		tp = node_parent((struct node *) tn);
+		tnode_free_flush();
 		if (!tp)
 			break;
 		tn = tp;
 	}
 
 	/* Handle last (top) tnode */
-	if (IS_TNODE(tn))
+	if (IS_TNODE(tn)) {
 		tn = (struct tnode *)resize(t, (struct tnode *)tn);
+		tnode_free_flush();
+	}
 
-	preempt_enable();
 	return (struct node *)tn;
 }
 
@@ -1351,8 +1378,7 @@ static int check_leaf(struct trie *t, struct leaf *l,
 		if (l->key != (key & ntohl(mask)))
 			continue;
 
-		err = fib_semantic_match(&li->falh, flp, res,
-					 htonl(l->key), mask, plen);
+		err = fib_semantic_match(&li->falh, flp, res, plen);
 
 #ifdef CONFIG_IP_FIB_TRIE_STATS
 		if (err <= 0)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 3f50807237e..97c410e8438 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -356,7 +356,7 @@ static void icmp_push_reply(struct icmp_bxm *icmp_param,
 static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 {
 	struct ipcm_cookie ipc;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net *net = dev_net(rt->u.dst.dev);
 	struct sock *sk;
 	struct inet_sock *inet;
@@ -416,7 +416,7 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	struct iphdr *iph;
 	int room;
 	struct icmp_bxm icmp_param;
-	struct rtable *rt = skb_in->rtable;
+	struct rtable *rt = skb_rtable(skb_in);
 	struct ipcm_cookie ipc;
 	__be32 saddr;
 	u8  tos;
@@ -591,13 +591,13 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 				goto relookup_failed;
 
 			/* Ugh! */
-			odst = skb_in->dst;
+			odst = skb_dst(skb_in);
 			err = ip_route_input(skb_in, fl.fl4_dst, fl.fl4_src,
 					     RT_TOS(tos), rt2->u.dst.dev);
 
 			dst_release(&rt2->u.dst);
-			rt2 = skb_in->rtable;
-			skb_in->dst = odst;
+			rt2 = skb_rtable(skb_in);
+			skb_dst_set(skb_in, odst);
 		}
 
 		if (err)
@@ -659,7 +659,7 @@ static void icmp_unreach(struct sk_buff *skb)
 	u32 info = 0;
 	struct net *net;
 
-	net = dev_net(skb->dst->dev);
+	net = dev_net(skb_dst(skb)->dev);
 
 	/*
 	 *	Incomplete header ?
@@ -822,7 +822,7 @@ static void icmp_echo(struct sk_buff *skb)
 {
 	struct net *net;
 
-	net = dev_net(skb->dst->dev);
+	net = dev_net(skb_dst(skb)->dev);
 	if (!net->ipv4.sysctl_icmp_echo_ignore_all) {
 		struct icmp_bxm icmp_param;
 
@@ -873,7 +873,7 @@ static void icmp_timestamp(struct sk_buff *skb)
 out:
 	return;
 out_err:
-	ICMP_INC_STATS_BH(dev_net(skb->dst->dev), ICMP_MIB_INERRORS);
+	ICMP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ICMP_MIB_INERRORS);
 	goto out;
 }
 
@@ -926,7 +926,7 @@ static void icmp_address(struct sk_buff *skb)
 
 static void icmp_address_reply(struct sk_buff *skb)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net_device *dev = skb->dev;
 	struct in_device *in_dev;
 	struct in_ifaddr *ifa;
@@ -970,7 +970,7 @@ static void icmp_discard(struct sk_buff *skb)
 int icmp_rcv(struct sk_buff *skb)
 {
 	struct icmphdr *icmph;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net *net = dev_net(rt->u.dst.dev);
 
 	if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 9eb6219af61..01b4284ed69 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -311,7 +311,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 		return NULL;
 	}
 
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 	skb->dev = dev;
 
 	skb_reserve(skb, LL_RESERVED_SPACE(dev));
@@ -659,7 +659,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 		return -1;
 	}
 
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 
 	skb_reserve(skb, LL_RESERVED_SPACE(dev));
 
@@ -948,7 +948,7 @@ int igmp_rcv(struct sk_buff *skb)
 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
 	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 		/* Is it our report looped back? */
-		if (skb->rtable->fl.iif == 0)
+		if (skb_rtable(skb)->fl.iif == 0)
 			break;
 		/* don't rely on MC router hearing unicast reports */
 		if (skb->pkt_type == PACKET_MULTICAST ||
@@ -2196,7 +2196,7 @@ int ip_mc_sf_allow(struct sock *sk, __be32 loc_addr, __be32 rmt_addr, int dif)
 			break;
 	}
 	if (!pmc)
-		return 1;
+		return inet->mc_all;
 	psl = pmc->sflist;
 	if (!psl)
 		return pmc->sfmode == MCAST_EXCLUDE;
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 588a7796e3e..b0b273503e2 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -198,8 +198,6 @@ static int inet_twsk_diag_fill(struct inet_timewait_sock *tw,
 		tmo = 0;
 
 	r->idiag_family	      = tw->tw_family;
-	r->idiag_state	      = tw->tw_state;
-	r->idiag_timer	      = 0;
 	r->idiag_retrans      = 0;
 	r->id.idiag_if	      = tw->tw_bound_dev_if;
 	r->id.idiag_cookie[0] = (u32)(unsigned long)tw;
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 8554d0ea171..68a8d892c71 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -49,19 +49,22 @@ static void __inet_twsk_kill(struct inet_timewait_sock *tw,
 	inet_twsk_put(tw);
 }
 
-void inet_twsk_put(struct inet_timewait_sock *tw)
+static noinline void inet_twsk_free(struct inet_timewait_sock *tw)
 {
-	if (atomic_dec_and_test(&tw->tw_refcnt)) {
-		struct module *owner = tw->tw_prot->owner;
-		twsk_destructor((struct sock *)tw);
+	struct module *owner = tw->tw_prot->owner;
+	twsk_destructor((struct sock *)tw);
 #ifdef SOCK_REFCNT_DEBUG
-		printk(KERN_DEBUG "%s timewait_sock %p released\n",
-		       tw->tw_prot->name, tw);
+	pr_debug("%s timewait_sock %p released\n", tw->tw_prot->name, tw);
 #endif
-		release_net(twsk_net(tw));
-		kmem_cache_free(tw->tw_prot->twsk_prot->twsk_slab, tw);
-		module_put(owner);
-	}
+	release_net(twsk_net(tw));
+	kmem_cache_free(tw->tw_prot->twsk_prot->twsk_slab, tw);
+	module_put(owner);
+}
+
+void inet_twsk_put(struct inet_timewait_sock *tw)
+{
+	if (atomic_dec_and_test(&tw->tw_refcnt))
+		inet_twsk_free(tw);
 }
 EXPORT_SYMBOL_GPL(inet_twsk_put);
 
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index df3fe50bbf0..a2991bc8e32 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -42,7 +42,7 @@ static int ip_forward_finish(struct sk_buff *skb)
 {
 	struct ip_options * opt	= &(IPCB(skb)->opt);
 
-	IP_INC_STATS_BH(dev_net(skb->dst->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
 
 	if (unlikely(opt->optlen))
 		ip_forward_options(skb);
@@ -81,7 +81,7 @@ int ip_forward(struct sk_buff *skb)
 	if (!xfrm4_route_forward(skb))
 		goto drop;
 
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 
 	if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
 		goto sr_failed;
@@ -123,7 +123,7 @@ sr_failed:
 
 too_many_hops:
 	/* Tell the sender its packet died... */
-	IP_INC_STATS_BH(dev_net(skb->dst->dev), IPSTATS_MIB_INHDRERRORS);
+	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_INHDRERRORS);
 	icmp_send(skb, ICMP_TIME_EXCEEDED, ICMP_EXC_TTL, 0);
 drop:
 	kfree_skb(skb);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 7985346653b..575f9bd51cc 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -507,7 +507,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 	/* If the first fragment is fragmented itself, we split
 	 * it to two chunks: the first with data and paged part
 	 * and the second, holding only fragments. */
-	if (skb_shinfo(head)->frag_list) {
+	if (skb_has_frags(head)) {
 		struct sk_buff *clone;
 		int i, plen = 0;
 
@@ -516,7 +516,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
-		skb_shinfo(head)->frag_list = NULL;
+		skb_frag_list_init(head);
 		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
 			plen += skb_shinfo(head)->frags[i].size;
 		clone->len = clone->data_len = head->data_len - plen;
@@ -573,7 +573,7 @@ int ip_defrag(struct sk_buff *skb, u32 user)
 	struct ipq *qp;
 	struct net *net;
 
-	net = skb->dev ? dev_net(skb->dev) : dev_net(skb->dst->dev);
+	net = skb->dev ? dev_net(skb->dev) : dev_net(skb_dst(skb)->dev);
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMREQDS);
 
 	/* Start by cleaning up the memory. */
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index e62510d5ea5..44e2a3d2359 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -602,7 +602,7 @@ static int ipgre_rcv(struct sk_buff *skb)
 #ifdef CONFIG_NET_IPGRE_BROADCAST
 		if (ipv4_is_multicast(iph->daddr)) {
 			/* Looped back packet, drop it! */
-			if (skb->rtable->fl.iif == 0)
+			if (skb_rtable(skb)->fl.iif == 0)
 				goto drop;
 			stats->multicast++;
 			skb->pkt_type = PACKET_BROADCAST;
@@ -643,8 +643,7 @@ static int ipgre_rcv(struct sk_buff *skb)
 		stats->rx_packets++;
 		stats->rx_bytes += len;
 		skb->dev = tunnel->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 
 		skb_reset_network_header(skb);
@@ -698,13 +697,13 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if ((dst = tiph->daddr) == 0) {
 		/* NBMA tunnel */
 
-		if (skb->dst == NULL) {
+		if (skb_dst(skb) == NULL) {
 			stats->tx_fifo_errors++;
 			goto tx_error;
 		}
 
 		if (skb->protocol == htons(ETH_P_IP)) {
-			rt = skb->rtable;
+			rt = skb_rtable(skb);
 			if ((dst = rt->rt_gateway) == 0)
 				goto tx_error_icmp;
 		}
@@ -712,7 +711,7 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 		else if (skb->protocol == htons(ETH_P_IPV6)) {
 			struct in6_addr *addr6;
 			int addr_type;
-			struct neighbour *neigh = skb->dst->neighbour;
+			struct neighbour *neigh = skb_dst(skb)->neighbour;
 
 			if (neigh == NULL)
 				goto tx_error;
@@ -766,10 +765,10 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (df)
 		mtu = dst_mtu(&rt->u.dst) - dev->hard_header_len - tunnel->hlen;
 	else
-		mtu = skb->dst ? dst_mtu(skb->dst) : dev->mtu;
+		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	if (skb->protocol == htons(ETH_P_IP)) {
 		df |= (old_iph->frag_off&htons(IP_DF));
@@ -783,14 +782,14 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 #ifdef CONFIG_IPV6
 	else if (skb->protocol == htons(ETH_P_IPV6)) {
-		struct rt6_info *rt6 = (struct rt6_info *)skb->dst;
+		struct rt6_info *rt6 = (struct rt6_info *)skb_dst(skb);
 
-		if (rt6 && mtu < dst_mtu(skb->dst) && mtu >= IPV6_MIN_MTU) {
+		if (rt6 && mtu < dst_mtu(skb_dst(skb)) && mtu >= IPV6_MIN_MTU) {
 			if ((tunnel->parms.iph.daddr &&
 			     !ipv4_is_multicast(tunnel->parms.iph.daddr)) ||
 			    rt6->rt6i_dst.plen == 128) {
 				rt6->rt6i_flags |= RTF_MODIFIED;
-				skb->dst->metrics[RTAX_MTU-1] = mtu;
+				skb_dst(skb)->metrics[RTAX_MTU-1] = mtu;
 			}
 		}
 
@@ -837,8 +836,8 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 	IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
 			      IPSKB_REROUTED);
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -1238,6 +1237,7 @@ static void ipgre_tunnel_setup(struct net_device *dev)
 	dev->iflink		= 0;
 	dev->addr_len		= 4;
 	dev->features		|= NETIF_F_NETNS_LOCAL;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 }
 
 static int ipgre_tunnel_init(struct net_device *dev)
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 1a58a6fa1dc..490ce20faf3 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -329,7 +329,7 @@ static int ip_rcv_finish(struct sk_buff *skb)
 	 *	Initialise the virtual path cache for the packet. It describes
 	 *	how the packet travels inside Linux networking.
 	 */
-	if (skb->dst == NULL) {
+	if (skb_dst(skb) == NULL) {
 		int err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
 					 skb->dev);
 		if (unlikely(err)) {
@@ -344,9 +344,9 @@ static int ip_rcv_finish(struct sk_buff *skb)
 	}
 
 #ifdef CONFIG_NET_CLS_ROUTE
-	if (unlikely(skb->dst->tclassid)) {
+	if (unlikely(skb_dst(skb)->tclassid)) {
 		struct ip_rt_acct *st = per_cpu_ptr(ip_rt_acct, smp_processor_id());
-		u32 idx = skb->dst->tclassid;
+		u32 idx = skb_dst(skb)->tclassid;
 		st[idx&0xFF].o_packets++;
 		st[idx&0xFF].o_bytes += skb->len;
 		st[(idx>>16)&0xFF].i_packets++;
@@ -357,11 +357,13 @@ static int ip_rcv_finish(struct sk_buff *skb)
 	if (iph->ihl > 5 && ip_rcv_options(skb))
 		goto drop;
 
-	rt = skb->rtable;
-	if (rt->rt_type == RTN_MULTICAST)
-		IP_INC_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INMCASTPKTS);
-	else if (rt->rt_type == RTN_BROADCAST)
-		IP_INC_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INBCASTPKTS);
+	rt = skb_rtable(skb);
+	if (rt->rt_type == RTN_MULTICAST) {
+		IP_UPD_PO_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INMCAST,
+				skb->len);
+	} else if (rt->rt_type == RTN_BROADCAST)
+		IP_UPD_PO_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INBCAST,
+				skb->len);
 
 	return dst_input(skb);
 
@@ -384,7 +386,8 @@ int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt,
 	if (skb->pkt_type == PACKET_OTHERHOST)
 		goto drop;
 
-	IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_INRECEIVES);
+
+	IP_UPD_PO_STATS_BH(dev_net(dev), IPSTATS_MIB_IN, skb->len);
 
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
 		IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_INDISCARDS);
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index 2c88da6e786..94bf105ef3c 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -102,7 +102,7 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 	sptr = skb_network_header(skb);
 	dptr = dopt->__data;
 
-	daddr = skb->rtable->rt_spec_dst;
+	daddr = skb_rtable(skb)->rt_spec_dst;
 
 	if (sopt->rr) {
 		optlen  = sptr[sopt->rr+1];
@@ -143,7 +143,7 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 						__be32 addr;
 
 						memcpy(&addr, sptr+soffset-1, 4);
-						if (inet_addr_type(dev_net(skb->dst->dev), addr) != RTN_LOCAL) {
+						if (inet_addr_type(dev_net(skb_dst(skb)->dev), addr) != RTN_LOCAL) {
 							dopt->ts_needtime = 1;
 							soffset += 8;
 						}
@@ -257,7 +257,7 @@ int ip_options_compile(struct net *net,
 	struct rtable *rt = NULL;
 
 	if (skb != NULL) {
-		rt = skb->rtable;
+		rt = skb_rtable(skb);
 		optptr = (unsigned char *)&(ip_hdr(skb)[1]);
 	} else
 		optptr = opt->__data;
@@ -550,7 +550,7 @@ void ip_forward_options(struct sk_buff *skb)
 {
 	struct   ip_options * opt	= &(IPCB(skb)->opt);
 	unsigned char * optptr;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	unsigned char *raw = skb_network_header(skb);
 
 	if (opt->rr_needaddr) {
@@ -598,7 +598,7 @@ int ip_options_rcv_srr(struct sk_buff *skb)
 	__be32 nexthop;
 	struct iphdr *iph = ip_hdr(skb);
 	unsigned char *optptr = skb_network_header(skb) + opt->srr;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct rtable *rt2;
 	int err;
 
@@ -623,13 +623,13 @@ int ip_options_rcv_srr(struct sk_buff *skb)
 		}
 		memcpy(&nexthop, &optptr[srrptr-1], 4);
 
-		rt = skb->rtable;
-		skb->rtable = NULL;
+		rt = skb_rtable(skb);
+		skb_dst_set(skb, NULL);
 		err = ip_route_input(skb, nexthop, iph->saddr, iph->tos, skb->dev);
-		rt2 = skb->rtable;
+		rt2 = skb_rtable(skb);
 		if (err || (rt2->rt_type != RTN_UNICAST && rt2->rt_type != RTN_LOCAL)) {
 			ip_rt_put(rt2);
-			skb->rtable = rt;
+			skb_dst_set(skb, &rt->u.dst);
 			return -EINVAL;
 		}
 		ip_rt_put(rt);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 3e7e910c7c0..24702628266 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -95,7 +95,7 @@ int __ip_local_out(struct sk_buff *skb)
 
 	iph->tot_len = htons(skb->len);
 	ip_send_check(iph);
-	return nf_hook(PF_INET, NF_INET_LOCAL_OUT, skb, NULL, skb->dst->dev,
+	return nf_hook(PF_INET, NF_INET_LOCAL_OUT, skb, NULL, skb_dst(skb)->dev,
 		       dst_output);
 }
 
@@ -118,7 +118,7 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	WARN_ON(!newskb->dst);
+	WARN_ON(!skb_dst(newskb));
 	netif_rx(newskb);
 	return 0;
 }
@@ -140,7 +140,7 @@ int ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
 			  __be32 saddr, __be32 daddr, struct ip_options *opt)
 {
 	struct inet_sock *inet = inet_sk(sk);
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 
 	/* Build the IP header. */
@@ -176,15 +176,15 @@ EXPORT_SYMBOL_GPL(ip_build_and_send_pkt);
 
 static inline int ip_finish_output2(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct rtable *rt = (struct rtable *)dst;
 	struct net_device *dev = dst->dev;
 	unsigned int hh_len = LL_RESERVED_SPACE(dev);
 
-	if (rt->rt_type == RTN_MULTICAST)
-		IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTMCASTPKTS);
-	else if (rt->rt_type == RTN_BROADCAST)
-		IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTBCASTPKTS);
+	if (rt->rt_type == RTN_MULTICAST) {
+		IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUTMCAST, skb->len);
+	} else if (rt->rt_type == RTN_BROADCAST)
+		IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUTBCAST, skb->len);
 
 	/* Be paranoid, rather than too clever. */
 	if (unlikely(skb_headroom(skb) < hh_len && dev->header_ops)) {
@@ -217,14 +217,14 @@ static inline int ip_skb_dst_mtu(struct sk_buff *skb)
 	struct inet_sock *inet = skb->sk ? inet_sk(skb->sk) : NULL;
 
 	return (inet && inet->pmtudisc == IP_PMTUDISC_PROBE) ?
-	       skb->dst->dev->mtu : dst_mtu(skb->dst);
+	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
 }
 
 static int ip_finish_output(struct sk_buff *skb)
 {
 #if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
 	/* Policy lookup after SNAT yielded a new policy */
-	if (skb->dst->xfrm != NULL) {
+	if (skb_dst(skb)->xfrm != NULL) {
 		IPCB(skb)->flags |= IPSKB_REROUTED;
 		return dst_output(skb);
 	}
@@ -238,13 +238,13 @@ static int ip_finish_output(struct sk_buff *skb)
 int ip_mc_output(struct sk_buff *skb)
 {
 	struct sock *sk = skb->sk;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net_device *dev = rt->u.dst.dev;
 
 	/*
 	 *	If the indicated interface is up and running, send the packet.
 	 */
-	IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTREQUESTS);
+	IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUT, skb->len);
 
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_IP);
@@ -296,9 +296,9 @@ int ip_mc_output(struct sk_buff *skb)
 
 int ip_output(struct sk_buff *skb)
 {
-	struct net_device *dev = skb->dst->dev;
+	struct net_device *dev = skb_dst(skb)->dev;
 
-	IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTREQUESTS);
+	IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUT, skb->len);
 
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_IP);
@@ -319,7 +319,7 @@ int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
 	/* Skip all of this if the packet is already routed,
 	 * f.e. by something like SCTP.
 	 */
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 	if (rt != NULL)
 		goto packet_routed;
 
@@ -355,7 +355,7 @@ int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
 		}
 		sk_setup_caps(sk, &rt->u.dst);
 	}
-	skb->dst = dst_clone(&rt->u.dst);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
 
 packet_routed:
 	if (opt && opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
@@ -401,8 +401,8 @@ static void ip_copy_metadata(struct sk_buff *to, struct sk_buff *from)
 	to->pkt_type = from->pkt_type;
 	to->priority = from->priority;
 	to->protocol = from->protocol;
-	dst_release(to->dst);
-	to->dst = dst_clone(from->dst);
+	skb_dst_drop(to);
+	skb_dst_set(to, dst_clone(skb_dst(from)));
 	to->dev = from->dev;
 	to->mark = from->mark;
 
@@ -440,7 +440,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	unsigned int mtu, hlen, left, len, ll_rs, pad;
 	int offset;
 	__be16 not_last_frag;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	int err = 0;
 
 	dev = rt->u.dst.dev;
@@ -474,7 +474,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	 * LATER: this step can be merged to real generation of fragments,
 	 * we can switch to copy when see the first bad fragment.
 	 */
-	if (skb_shinfo(skb)->frag_list) {
+	if (skb_has_frags(skb)) {
 		struct sk_buff *frag;
 		int first_len = skb_pagelen(skb);
 		int truesizes = 0;
@@ -485,7 +485,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		    skb_cloned(skb))
 			goto slow_path;
 
-		for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+		skb_walk_frags(skb, frag) {
 			/* Correct geometry. */
 			if (frag->len > mtu ||
 			    ((frag->len & 7) && frag->next) ||
@@ -498,7 +498,6 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 
 			BUG_ON(frag->sk);
 			if (skb->sk) {
-				sock_hold(skb->sk);
 				frag->sk = skb->sk;
 				frag->destructor = sock_wfree;
 				truesizes += frag->truesize;
@@ -510,7 +509,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		err = 0;
 		offset = 0;
 		frag = skb_shinfo(skb)->frag_list;
-		skb_shinfo(skb)->frag_list = NULL;
+		skb_frag_list_init(skb);
 		skb->data_len = first_len - skb_headlen(skb);
 		skb->truesize -= truesizes;
 		skb->len = first_len;
@@ -1294,7 +1293,7 @@ int ip_push_pending_frames(struct sock *sk)
 	 * on dst refcount
 	 */
 	inet->cork.dst = NULL;
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 
 	if (iph->protocol == IPPROTO_ICMP)
 		icmp_out_count(net, ((struct icmphdr *)
@@ -1362,7 +1361,7 @@ void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *ar
 	} replyopts;
 	struct ipcm_cookie ipc;
 	__be32 daddr;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 
 	if (ip_options_echo(&replyopts.opt, skb))
 		return;
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 43c05854d75..fc7993e9061 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -57,7 +57,7 @@
 static void ip_cmsg_recv_pktinfo(struct msghdr *msg, struct sk_buff *skb)
 {
 	struct in_pktinfo info;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 
 	info.ipi_addr.s_addr = ip_hdr(skb)->daddr;
 	if (rt) {
@@ -157,38 +157,39 @@ void ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb)
 	/* Ordered by supposed usage frequency */
 	if (flags & 1)
 		ip_cmsg_recv_pktinfo(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_ttl(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_tos(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_opts(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_retopts(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_security(msg, skb);
 
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 	if (flags & 1)
 		ip_cmsg_recv_dstaddr(msg, skb);
 
 }
+EXPORT_SYMBOL(ip_cmsg_recv);
 
 int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc)
 {
@@ -203,7 +204,8 @@ int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc)
 		switch (cmsg->cmsg_type) {
 		case IP_RETOPTS:
 			err = cmsg->cmsg_len - CMSG_ALIGN(sizeof(struct cmsghdr));
-			err = ip_options_get(net, &ipc->opt, CMSG_DATA(cmsg), err < 40 ? err : 40);
+			err = ip_options_get(net, &ipc->opt, CMSG_DATA(cmsg),
+					     err < 40 ? err : 40);
 			if (err)
 				return err;
 			break;
@@ -238,7 +240,8 @@ int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc)
 struct ip_ra_chain *ip_ra_chain;
 DEFINE_RWLOCK(ip_ra_lock);
 
-int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *))
+int ip_ra_control(struct sock *sk, unsigned char on,
+		  void (*destructor)(struct sock *))
 {
 	struct ip_ra_chain *ra, *new_ra, **rap;
 
@@ -248,7 +251,7 @@ int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct s
 	new_ra = on ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
 
 	write_lock_bh(&ip_ra_lock);
-	for (rap = &ip_ra_chain; (ra=*rap) != NULL; rap = &ra->next) {
+	for (rap = &ip_ra_chain; (ra = *rap) != NULL; rap = &ra->next) {
 		if (ra->sk == sk) {
 			if (on) {
 				write_unlock_bh(&ip_ra_lock);
@@ -416,7 +419,8 @@ int ip_recv_error(struct sock *sk, struct msghdr *msg, int len)
 	/* Reset and regenerate socket error */
 	spin_lock_bh(&sk->sk_error_queue.lock);
 	sk->sk_err = 0;
-	if ((skb2 = skb_peek(&sk->sk_error_queue)) != NULL) {
+	skb2 = skb_peek(&sk->sk_error_queue);
+	if (skb2 != NULL) {
 		sk->sk_err = SKB_EXT_ERR(skb2)->ee.ee_errno;
 		spin_unlock_bh(&sk->sk_error_queue.lock);
 		sk->sk_error_report(sk);
@@ -431,8 +435,8 @@ out:
 
 
 /*
- *	Socket option code for IP. This is the end of the line after any TCP,UDP etc options on
- *	an IP socket.
+ *	Socket option code for IP. This is the end of the line after any
+ *	TCP,UDP etc options on an IP socket.
  */
 
 static int do_ip_setsockopt(struct sock *sk, int level,
@@ -449,6 +453,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 			     (1<<IP_ROUTER_ALERT) | (1<<IP_FREEBIND) |
 			     (1<<IP_PASSSEC) | (1<<IP_TRANSPARENT))) ||
 	    optname == IP_MULTICAST_TTL ||
+	    optname == IP_MULTICAST_ALL ||
 	    optname == IP_MULTICAST_LOOP ||
 	    optname == IP_RECVORIGDSTADDR) {
 		if (optlen >= sizeof(int)) {
@@ -474,7 +479,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	switch (optname) {
 	case IP_OPTIONS:
 	{
-		struct ip_options * opt = NULL;
+		struct ip_options *opt = NULL;
 		if (optlen > 40 || optlen < 0)
 			goto e_inval;
 		err = ip_options_get_from_user(sock_net(sk), &opt,
@@ -556,9 +561,9 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		}
 		break;
 	case IP_TTL:
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
-		if (val != -1 && (val < 1 || val>255))
+		if (val != -1 && (val < 0 || val > 255))
 			goto e_inval;
 		inet->uc_ttl = val;
 		break;
@@ -570,7 +575,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		inet->hdrincl = val ? 1 : 0;
 		break;
 	case IP_MTU_DISCOVER:
-		if (val<0 || val>3)
+		if (val < 0 || val > 3)
 			goto e_inval;
 		inet->pmtudisc = val;
 		break;
@@ -582,7 +587,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	case IP_MULTICAST_TTL:
 		if (sk->sk_type == SOCK_STREAM)
 			goto e_inval;
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
 		if (val == -1)
 			val = 1;
@@ -591,7 +596,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		inet->mc_ttl = val;
 		break;
 	case IP_MULTICAST_LOOP:
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
 		inet->mc_loop = !!val;
 		break;
@@ -613,7 +618,8 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		} else {
 			memset(&mreq, 0, sizeof(mreq));
 			if (optlen >= sizeof(struct in_addr) &&
-			    copy_from_user(&mreq.imr_address, optval, sizeof(struct in_addr)))
+			    copy_from_user(&mreq.imr_address, optval,
+					   sizeof(struct in_addr)))
 				break;
 		}
 
@@ -677,7 +683,6 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	}
 	case IP_MSFILTER:
 	{
-		extern int sysctl_igmp_max_msf;
 		struct ip_msfilter *msf;
 
 		if (optlen < IP_MSFILTER_SIZE(0))
@@ -831,7 +836,6 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	}
 	case MCAST_MSFILTER:
 	{
-		extern int sysctl_igmp_max_msf;
 		struct sockaddr_in *psin;
 		struct ip_msfilter *msf = NULL;
 		struct group_filter *gsf = NULL;
@@ -849,9 +853,9 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 			break;
 		}
 		err = -EFAULT;
-		if (copy_from_user(gsf, optval, optlen)) {
+		if (copy_from_user(gsf, optval, optlen))
 			goto mc_msf_out;
-		}
+
 		/* numsrc >= (4G-140)/128 overflow in 32 bits */
 		if (gsf->gf_numsrc >= 0x1ffffff ||
 		    gsf->gf_numsrc > sysctl_igmp_max_msf) {
@@ -879,7 +883,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		msf->imsf_fmode = gsf->gf_fmode;
 		msf->imsf_numsrc = gsf->gf_numsrc;
 		err = -EADDRNOTAVAIL;
-		for (i=0; i<gsf->gf_numsrc; ++i) {
+		for (i = 0; i < gsf->gf_numsrc; ++i) {
 			psin = (struct sockaddr_in *)&gsf->gf_slist[i];
 
 			if (psin->sin_family != AF_INET)
@@ -890,17 +894,24 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		gsf = NULL;
 
 		err = ip_mc_msfilter(sk, msf, ifindex);
-	mc_msf_out:
+mc_msf_out:
 		kfree(msf);
 		kfree(gsf);
 		break;
 	}
+	case IP_MULTICAST_ALL:
+		if (optlen < 1)
+			goto e_inval;
+		if (val != 0 && val != 1)
+			goto e_inval;
+		inet->mc_all = val;
+		break;
 	case IP_ROUTER_ALERT:
 		err = ip_ra_control(sk, val ? 1 : 0, NULL);
 		break;
 
 	case IP_FREEBIND:
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
 		inet->freebind = !!val;
 		break;
@@ -957,6 +968,7 @@ int ip_setsockopt(struct sock *sk, int level,
 #endif
 	return err;
 }
+EXPORT_SYMBOL(ip_setsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_ip_setsockopt(struct sock *sk, int level, int optname,
@@ -986,13 +998,12 @@ int compat_ip_setsockopt(struct sock *sk, int level, int optname,
 #endif
 	return err;
 }
-
 EXPORT_SYMBOL(compat_ip_setsockopt);
 #endif
 
 /*
- *	Get the options. Note for future reference. The GET of IP options gets the
- *	_received_ ones. The set sets the _sent_ ones.
+ *	Get the options. Note for future reference. The GET of IP options gets
+ *	the _received_ ones. The set sets the _sent_ ones.
  */
 
 static int do_ip_getsockopt(struct sock *sk, int level, int optname,
@@ -1143,10 +1154,14 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 			return -EFAULT;
 		}
 		err = ip_mc_gsfget(sk, &gsf,
-				   (struct group_filter __user *)optval, optlen);
+				   (struct group_filter __user *)optval,
+				   optlen);
 		release_sock(sk);
 		return err;
 	}
+	case IP_MULTICAST_ALL:
+		val = inet->mc_all;
+		break;
 	case IP_PKTOPTIONS:
 	{
 		struct msghdr msg;
@@ -1187,7 +1202,7 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	}
 	release_sock(sk);
 
-	if (len < sizeof(int) && len > 0 && val>=0 && val<=255) {
+	if (len < sizeof(int) && len > 0 && val >= 0 && val <= 255) {
 		unsigned char ucval = (unsigned char)val;
 		len = 1;
 		if (put_user(len, optlen))
@@ -1230,6 +1245,7 @@ int ip_getsockopt(struct sock *sk, int level,
 #endif
 	return err;
 }
+EXPORT_SYMBOL(ip_getsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_ip_getsockopt(struct sock *sk, int level, int optname,
@@ -1262,11 +1278,5 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
 #endif
 	return err;
 }
-
 EXPORT_SYMBOL(compat_ip_getsockopt);
 #endif
-
-EXPORT_SYMBOL(ip_cmsg_recv);
-
-EXPORT_SYMBOL(ip_getsockopt);
-EXPORT_SYMBOL(ip_setsockopt);
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 88bf051d0cb..f8d04c25645 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -160,6 +160,9 @@ static char user_dev_name[IFNAMSIZ] __initdata = { 0, };
 /* Protocols supported by available interfaces */
 static int ic_proto_have_if __initdata = 0;
 
+/* MTU for boot device */
+static int ic_dev_mtu __initdata = 0;
+
 #ifdef IPCONFIG_DYNAMIC
 static DEFINE_SPINLOCK(ic_recv_lock);
 static volatile int ic_got_reply __initdata = 0;    /* Proto(s) that replied */
@@ -286,7 +289,7 @@ set_sockaddr(struct sockaddr_in *sin, __be32 addr, __be16 port)
 	sin->sin_port = port;
 }
 
-static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg)
+static int __init ic_devinet_ioctl(unsigned int cmd, struct ifreq *arg)
 {
 	int res;
 
@@ -297,6 +300,17 @@ static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg)
 	return res;
 }
 
+static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg)
+{
+	int res;
+
+	mm_segment_t oldfs = get_fs();
+	set_fs(get_ds());
+	res = dev_ioctl(&init_net, cmd, (struct ifreq __user *) arg);
+	set_fs(oldfs);
+	return res;
+}
+
 static int __init ic_route_ioctl(unsigned int cmd, struct rtentry *arg)
 {
 	int res;
@@ -321,20 +335,31 @@ static int __init ic_setup_if(void)
 	memset(&ir, 0, sizeof(ir));
 	strcpy(ir.ifr_ifrn.ifrn_name, ic_dev->name);
 	set_sockaddr(sin, ic_myaddr, 0);
-	if ((err = ic_dev_ioctl(SIOCSIFADDR, &ir)) < 0) {
+	if ((err = ic_devinet_ioctl(SIOCSIFADDR, &ir)) < 0) {
 		printk(KERN_ERR "IP-Config: Unable to set interface address (%d).\n", err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_netmask, 0);
-	if ((err = ic_dev_ioctl(SIOCSIFNETMASK, &ir)) < 0) {
+	if ((err = ic_devinet_ioctl(SIOCSIFNETMASK, &ir)) < 0) {
 		printk(KERN_ERR "IP-Config: Unable to set interface netmask (%d).\n", err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_myaddr | ~ic_netmask, 0);
-	if ((err = ic_dev_ioctl(SIOCSIFBRDADDR, &ir)) < 0) {
+	if ((err = ic_devinet_ioctl(SIOCSIFBRDADDR, &ir)) < 0) {
 		printk(KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n", err);
 		return -1;
 	}
+	/* Handle the case where we need non-standard MTU on the boot link (a network
+	 * using jumbo frames, for instance).  If we can't set the mtu, don't error
+	 * out, we'll try to muddle along.
+	 */
+	if (ic_dev_mtu != 0) {
+		strcpy(ir.ifr_name, ic_dev->name);
+		ir.ifr_mtu = ic_dev_mtu;
+		if ((err = ic_dev_ioctl(SIOCSIFMTU, &ir)) < 0)
+			printk(KERN_ERR "IP-Config: Unable to set interface mtu to %d (%d).\n",
+			                 ic_dev_mtu, err);
+	}
 	return 0;
 }
 
@@ -623,6 +648,7 @@ ic_dhcp_init_options(u8 *options)
 			12,	/* Host name */
 			15,	/* Domain name */
 			17,	/* Boot path */
+			26,	/* MTU */
 			40,	/* NIS domain name */
 		};
 
@@ -798,6 +824,7 @@ static void __init ic_do_bootp_ext(u8 *ext)
 {
        u8 servers;
        int i;
+	u16 mtu;
 
 #ifdef IPCONFIG_DEBUG
 	u8 *c;
@@ -837,6 +864,10 @@ static void __init ic_do_bootp_ext(u8 *ext)
 			if (!root_server_path[0])
 				ic_bootp_string(root_server_path, ext+1, *ext, sizeof(root_server_path));
 			break;
+		case 26:	/* Interface MTU */
+			memcpy(&mtu, ext+1, sizeof(mtu));
+			ic_dev_mtu = ntohs(mtu);
+			break;
 		case 40:	/* NIS Domain name (_not_ DNS) */
 			ic_bootp_string(utsname()->domainname, ext+1, *ext, __NEW_UTS_LEN);
 			break;
@@ -1403,6 +1434,8 @@ static int __init ip_auto_config(void)
 	printk(",\n     bootserver=%pI4", &ic_servaddr);
 	printk(", rootserver=%pI4", &root_server_addr);
 	printk(", rootpath=%s", root_server_path);
+	if (ic_dev_mtu)
+		printk(", mtu=%d", ic_dev_mtu);
 	printk("\n");
 #endif /* !SILENT */
 
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 9054139795a..93e2b787da2 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -370,8 +370,7 @@ static int ipip_rcv(struct sk_buff *skb)
 		tunnel->dev->stats.rx_packets++;
 		tunnel->dev->stats.rx_bytes += skb->len;
 		skb->dev = tunnel->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 		ipip_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
@@ -416,7 +415,7 @@ static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!dst) {
 		/* NBMA tunnel */
-		if ((rt = skb->rtable) == NULL) {
+		if ((rt = skb_rtable(skb)) == NULL) {
 			stats->tx_fifo_errors++;
 			goto tx_error;
 		}
@@ -447,15 +446,15 @@ static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (tiph->frag_off)
 		mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
 	else
-		mtu = skb->dst ? dst_mtu(skb->dst) : dev->mtu;
+		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
 	if (mtu < 68) {
 		stats->collisions++;
 		ip_rt_put(rt);
 		goto tx_error;
 	}
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	df |= (old_iph->frag_off&htons(IP_DF));
 
@@ -502,8 +501,8 @@ static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 	IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
 			      IPSKB_REROUTED);
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -713,6 +712,7 @@ static void ipip_tunnel_setup(struct net_device *dev)
 	dev->iflink		= 0;
 	dev->addr_len		= 4;
 	dev->features		|= NETIF_F_NETNS_LOCAL;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 }
 
 static void ipip_tunnel_init(struct net_device *dev)
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 13e9dd3012b..9a8da5ed92b 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -226,9 +226,10 @@ static void reg_vif_setup(struct net_device *dev)
 	dev->flags		= IFF_NOARP;
 	dev->netdev_ops		= &reg_vif_netdev_ops,
 	dev->destructor		= free_netdev;
+	dev->features		|= NETIF_F_NETNS_LOCAL;
 }
 
-static struct net_device *ipmr_reg_vif(void)
+static struct net_device *ipmr_reg_vif(struct net *net)
 {
 	struct net_device *dev;
 	struct in_device *in_dev;
@@ -238,6 +239,8 @@ static struct net_device *ipmr_reg_vif(void)
 	if (dev == NULL)
 		return NULL;
 
+	dev_net_set(dev, net);
+
 	if (register_netdevice(dev)) {
 		free_netdev(dev);
 		return NULL;
@@ -448,7 +451,7 @@ static int vif_add(struct net *net, struct vifctl *vifc, int mrtsock)
 		 */
 		if (net->ipv4.mroute_reg_vif_num >= 0)
 			return -EADDRINUSE;
-		dev = ipmr_reg_vif();
+		dev = ipmr_reg_vif(net);
 		if (!dev)
 			return -ENOBUFS;
 		err = dev_set_allmulti(dev, 1);
@@ -651,7 +654,7 @@ static int ipmr_cache_report(struct net *net,
 	ip_hdr(skb)->protocol = 0;			/* Flag to the kernel this is a route add */
 	msg = (struct igmpmsg *)skb_network_header(skb);
 	msg->im_vif = vifi;
-	skb->dst = dst_clone(pkt->dst);
+	skb_dst_set(skb, dst_clone(skb_dst(pkt)));
 
 	/*
 	 *	Add our header
@@ -1031,16 +1034,6 @@ int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int
 		if (v != net->ipv4.mroute_do_pim) {
 			net->ipv4.mroute_do_pim = v;
 			net->ipv4.mroute_do_assert = v;
-#ifdef CONFIG_IP_PIMSM_V2
-			if (net->ipv4.mroute_do_pim)
-				ret = inet_add_protocol(&pim_protocol,
-							IPPROTO_PIM);
-			else
-				ret = inet_del_protocol(&pim_protocol,
-							IPPROTO_PIM);
-			if (ret < 0)
-				ret = -EAGAIN;
-#endif
 		}
 		rtnl_unlock();
 		return ret;
@@ -1201,7 +1194,7 @@ static void ip_encap(struct sk_buff *skb, __be32 saddr, __be32 daddr)
 	iph->protocol	=	IPPROTO_IPIP;
 	iph->ihl	=	5;
 	iph->tot_len	=	htons(skb->len);
-	ip_select_ident(iph, skb->dst, NULL);
+	ip_select_ident(iph, skb_dst(skb), NULL);
 	ip_send_check(iph);
 
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
@@ -1212,7 +1205,7 @@ static inline int ipmr_forward_finish(struct sk_buff *skb)
 {
 	struct ip_options * opt	= &(IPCB(skb)->opt);
 
-	IP_INC_STATS_BH(dev_net(skb->dst->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
 
 	if (unlikely(opt->optlen))
 		ip_forward_options(skb);
@@ -1290,8 +1283,8 @@ static void ipmr_queue_xmit(struct sk_buff *skb, struct mfc_cache *c, int vifi)
 	vif->pkt_out++;
 	vif->bytes_out += skb->len;
 
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 	ip_decrease_ttl(ip_hdr(skb));
 
 	/* FIXME: forward and output firewalls used to be called here.
@@ -1354,7 +1347,7 @@ static int ip_mr_forward(struct sk_buff *skb, struct mfc_cache *cache, int local
 	if (net->ipv4.vif_table[vif].dev != skb->dev) {
 		int true_vifi;
 
-		if (skb->rtable->fl.iif == 0) {
+		if (skb_rtable(skb)->fl.iif == 0) {
 			/* It is our own packet, looped back.
 			   Very complicated situation...
 
@@ -1430,7 +1423,7 @@ int ip_mr_input(struct sk_buff *skb)
 {
 	struct mfc_cache *cache;
 	struct net *net = dev_net(skb->dev);
-	int local = skb->rtable->rt_flags&RTCF_LOCAL;
+	int local = skb_rtable(skb)->rt_flags & RTCF_LOCAL;
 
 	/* Packet is looped back after forward, it should not be
 	   forwarded second time, but still can be delivered locally.
@@ -1543,8 +1536,7 @@ static int __pim_rcv(struct sk_buff *skb, unsigned int pimlen)
 	skb->protocol = htons(ETH_P_IP);
 	skb->ip_summed = 0;
 	skb->pkt_type = PACKET_HOST;
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 	reg_dev->stats.rx_bytes += skb->len;
 	reg_dev->stats.rx_packets++;
 	nf_reset(skb);
@@ -1646,7 +1638,7 @@ int ipmr_get_route(struct net *net,
 {
 	int err;
 	struct mfc_cache *cache;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 
 	read_lock(&mrt_lock);
 	cache = ipmr_cache_find(net, rt->rt_src, rt->rt_dst);
@@ -1955,6 +1947,7 @@ static const struct file_operations ipmr_mfc_fops = {
 #ifdef CONFIG_IP_PIMSM_V2
 static struct net_protocol pim_protocol = {
 	.handler	=	pim_rcv,
+	.netns_ok	=	1,
 };
 #endif
 
@@ -2041,8 +2034,19 @@ int __init ip_mr_init(void)
 	err = register_netdevice_notifier(&ip_mr_notifier);
 	if (err)
 		goto reg_notif_fail;
+#ifdef CONFIG_IP_PIMSM_V2
+	if (inet_add_protocol(&pim_protocol, IPPROTO_PIM) < 0) {
+		printk(KERN_ERR "ip_mr_init: can't add PIM protocol\n");
+		err = -EAGAIN;
+		goto add_proto_fail;
+	}
+#endif
 	return 0;
 
+#ifdef CONFIG_IP_PIMSM_V2
+add_proto_fail:
+	unregister_netdevice_notifier(&ip_mr_notifier);
+#endif
 reg_notif_fail:
 	del_timer(&ipmr_expire_timer);
 	unregister_pernet_subsys(&ipmr_net_ops);
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index fdf6811c31a..1725dc0ef68 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -12,7 +12,7 @@
 /* route_me_harder function, used by iptable_nat, iptable_mangle + ip_queue */
 int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 {
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	const struct iphdr *iph = ip_hdr(skb);
 	struct rtable *rt;
 	struct flowi fl = {};
@@ -41,8 +41,8 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 			return -1;
 
 		/* Drop old route. */
-		dst_release(skb->dst);
-		skb->dst = &rt->u.dst;
+		skb_dst_drop(skb);
+		skb_dst_set(skb, &rt->u.dst);
 	} else {
 		/* non-local src, find valid iif to satisfy
 		 * rp-filter when calling ip_route_input. */
@@ -50,7 +50,7 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 		if (ip_route_output_key(net, &rt, &fl) != 0)
 			return -1;
 
-		odst = skb->dst;
+		odst = skb_dst(skb);
 		if (ip_route_input(skb, iph->daddr, iph->saddr,
 				   RT_TOS(iph->tos), rt->u.dst.dev) != 0) {
 			dst_release(&rt->u.dst);
@@ -60,18 +60,22 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 		dst_release(odst);
 	}
 
-	if (skb->dst->error)
+	if (skb_dst(skb)->error)
 		return -1;
 
 #ifdef CONFIG_XFRM
 	if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
-	    xfrm_decode_session(skb, &fl, AF_INET) == 0)
-		if (xfrm_lookup(net, &skb->dst, &fl, skb->sk, 0))
+	    xfrm_decode_session(skb, &fl, AF_INET) == 0) {
+		struct dst_entry *dst = skb_dst(skb);
+		skb_dst_set(skb, NULL);
+		if (xfrm_lookup(net, &dst, &fl, skb->sk, 0))
 			return -1;
+		skb_dst_set(skb, dst);
+	}
 #endif
 
 	/* Change in oif may mean change in hh_len. */
-	hh_len = skb->dst->dev->hard_header_len;
+	hh_len = skb_dst(skb)->dev->hard_header_len;
 	if (skb_headroom(skb) < hh_len &&
 	    pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
 		return -1;
@@ -92,7 +96,7 @@ int ip_xfrm_me_harder(struct sk_buff *skb)
 	if (xfrm_decode_session(skb, &fl, AF_INET) < 0)
 		return -1;
 
-	dst = skb->dst;
+	dst = skb_dst(skb);
 	if (dst->xfrm)
 		dst = ((struct xfrm_dst *)dst)->route;
 	dst_hold(dst);
@@ -100,11 +104,11 @@ int ip_xfrm_me_harder(struct sk_buff *skb)
 	if (xfrm_lookup(dev_net(dst->dev), &dst, &fl, skb->sk, 0) < 0)
 		return -1;
 
-	dst_release(skb->dst);
-	skb->dst = dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst);
 
 	/* Change in oif may mean change in hh_len. */
-	hh_len = skb->dst->dev->hard_header_len;
+	hh_len = skb_dst(skb)->dev->hard_header_len;
 	if (skb_headroom(skb) < hh_len &&
 	    pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
 		return -1;
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 831fe1879dc..7505dff4ffd 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -231,6 +231,12 @@ static inline struct arpt_entry *get_entry(void *base, unsigned int offset)
 	return (struct arpt_entry *)(base + offset);
 }
 
+static inline __pure
+struct arpt_entry *arpt_next_entry(const struct arpt_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 unsigned int arpt_do_table(struct sk_buff *skb,
 			   unsigned int hook,
 			   const struct net_device *in,
@@ -267,67 +273,64 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 
 	arp = arp_hdr(skb);
 	do {
-		if (arp_packet_match(arp, skb->dev, indev, outdev, &e->arp)) {
-			struct arpt_entry_target *t;
-			int hdr_len;
-
-			hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) +
-				(2 * skb->dev->addr_len);
+		struct arpt_entry_target *t;
+		int hdr_len;
 
-			ADD_COUNTER(e->counters, hdr_len, 1);
+		if (!arp_packet_match(arp, skb->dev, indev, outdev, &e->arp)) {
+			e = arpt_next_entry(e);
+			continue;
+		}
 
-			t = arpt_get_target(e);
+		hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) +
+			(2 * skb->dev->addr_len);
+		ADD_COUNTER(e->counters, hdr_len, 1);
 
-			/* Standard target? */
-			if (!t->u.kernel.target->target) {
-				int v;
+		t = arpt_get_target(e);
 
-				v = ((struct arpt_standard_target *)t)->verdict;
-				if (v < 0) {
-					/* Pop from stack? */
-					if (v != ARPT_RETURN) {
-						verdict = (unsigned)(-v) - 1;
-						break;
-					}
-					e = back;
-					back = get_entry(table_base,
-							 back->comefrom);
-					continue;
-				}
-				if (table_base + v
-				    != (void *)e + e->next_offset) {
-					/* Save old back ptr in next entry */
-					struct arpt_entry *next
-						= (void *)e + e->next_offset;
-					next->comefrom =
-						(void *)back - table_base;
-
-					/* set back pointer to next entry */
-					back = next;
-				}
+		/* Standard target? */
+		if (!t->u.kernel.target->target) {
+			int v;
 
-				e = get_entry(table_base, v);
-			} else {
-				/* Targets which reenter must return
-				 * abs. verdicts
-				 */
-				tgpar.target   = t->u.kernel.target;
-				tgpar.targinfo = t->data;
-				verdict = t->u.kernel.target->target(skb,
-								     &tgpar);
-
-				/* Target might have changed stuff. */
-				arp = arp_hdr(skb);
-
-				if (verdict == ARPT_CONTINUE)
-					e = (void *)e + e->next_offset;
-				else
-					/* Verdict */
+			v = ((struct arpt_standard_target *)t)->verdict;
+			if (v < 0) {
+				/* Pop from stack? */
+				if (v != ARPT_RETURN) {
+					verdict = (unsigned)(-v) - 1;
 					break;
+				}
+				e = back;
+				back = get_entry(table_base, back->comefrom);
+				continue;
 			}
-		} else {
-			e = (void *)e + e->next_offset;
+			if (table_base + v
+			    != arpt_next_entry(e)) {
+				/* Save old back ptr in next entry */
+				struct arpt_entry *next = arpt_next_entry(e);
+				next->comefrom = (void *)back - table_base;
+
+				/* set back pointer to next entry */
+				back = next;
+			}
+
+			e = get_entry(table_base, v);
+			continue;
 		}
+
+		/* Targets which reenter must return
+		 * abs. verdicts
+		 */
+		tgpar.target   = t->u.kernel.target;
+		tgpar.targinfo = t->data;
+		verdict = t->u.kernel.target->target(skb, &tgpar);
+
+		/* Target might have changed stuff. */
+		arp = arp_hdr(skb);
+
+		if (verdict == ARPT_CONTINUE)
+			e = arpt_next_entry(e);
+		else
+			/* Verdict */
+			break;
 	} while (!hotdrop);
 	xt_info_rdunlock_bh();
 
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 5f22c91c6e1..c156db21598 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -596,7 +596,7 @@ static int __init ip_queue_init(void)
 #ifdef CONFIG_SYSCTL
 	ipq_sysctl_header = register_sysctl_paths(net_ipv4_ctl_path, ipq_table);
 #endif
-	status = nf_register_queue_handler(PF_INET, &nfqh);
+	status = nf_register_queue_handler(NFPROTO_IPV4, &nfqh);
 	if (status < 0) {
 		printk(KERN_ERR "ip_queue: failed to register queue handler\n");
 		goto cleanup_sysctl;
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 2ec8d7290c4..fdefae6b5df 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -238,8 +238,8 @@ static struct nf_loginfo trace_loginfo = {
 /* Mildly perf critical (only if packet tracing is on) */
 static inline int
 get_chainname_rulenum(struct ipt_entry *s, struct ipt_entry *e,
-		      char *hookname, char **chainname,
-		      char **comment, unsigned int *rulenum)
+		      const char *hookname, const char **chainname,
+		      const char **comment, unsigned int *rulenum)
 {
 	struct ipt_standard_target *t = (void *)ipt_get_target(s);
 
@@ -257,8 +257,8 @@ get_chainname_rulenum(struct ipt_entry *s, struct ipt_entry *e,
 		   && unconditional(&s->ip)) {
 			/* Tail of chains: STANDARD target (return/policy) */
 			*comment = *chainname == hookname
-				? (char *)comments[NF_IP_TRACE_COMMENT_POLICY]
-				: (char *)comments[NF_IP_TRACE_COMMENT_RETURN];
+				? comments[NF_IP_TRACE_COMMENT_POLICY]
+				: comments[NF_IP_TRACE_COMMENT_RETURN];
 		}
 		return 1;
 	} else
@@ -277,14 +277,14 @@ static void trace_packet(struct sk_buff *skb,
 {
 	void *table_base;
 	const struct ipt_entry *root;
-	char *hookname, *chainname, *comment;
+	const char *hookname, *chainname, *comment;
 	unsigned int rulenum = 0;
 
-	table_base = (void *)private->entries[smp_processor_id()];
+	table_base = private->entries[smp_processor_id()];
 	root = get_entry(table_base, private->hook_entry[hook]);
 
-	hookname = chainname = (char *)hooknames[hook];
-	comment = (char *)comments[NF_IP_TRACE_COMMENT_RULE];
+	hookname = chainname = hooknames[hook];
+	comment = comments[NF_IP_TRACE_COMMENT_RULE];
 
 	IPT_ENTRY_ITERATE(root,
 			  private->size - private->hook_entry[hook],
@@ -297,6 +297,12 @@ static void trace_packet(struct sk_buff *skb,
 }
 #endif
 
+static inline __pure
+struct ipt_entry *ipt_next_entry(const struct ipt_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 /* Returns one of the generic firewall policies, like NF_ACCEPT. */
 unsigned int
 ipt_do_table(struct sk_buff *skb,
@@ -305,6 +311,8 @@ ipt_do_table(struct sk_buff *skb,
 	     const struct net_device *out,
 	     struct xt_table *table)
 {
+#define tb_comefrom ((struct ipt_entry *)table_base)->comefrom
+
 	static const char nulldevname[IFNAMSIZ] __attribute__((aligned(sizeof(long))));
 	const struct iphdr *ip;
 	u_int16_t datalen;
@@ -335,7 +343,7 @@ ipt_do_table(struct sk_buff *skb,
 	mtpar.in      = tgpar.in  = in;
 	mtpar.out     = tgpar.out = out;
 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
-	tgpar.hooknum = hook;
+	mtpar.hooknum = tgpar.hooknum = hook;
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
 	xt_info_rdlock_bh();
@@ -348,92 +356,84 @@ ipt_do_table(struct sk_buff *skb,
 	back = get_entry(table_base, private->underflow[hook]);
 
 	do {
+		struct ipt_entry_target *t;
+
 		IP_NF_ASSERT(e);
 		IP_NF_ASSERT(back);
-		if (ip_packet_match(ip, indev, outdev,
-		    &e->ip, mtpar.fragoff)) {
-			struct ipt_entry_target *t;
-
-			if (IPT_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0)
-				goto no_match;
+		if (!ip_packet_match(ip, indev, outdev,
+		    &e->ip, mtpar.fragoff) ||
+		    IPT_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0) {
+			e = ipt_next_entry(e);
+			continue;
+		}
 
-			ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
+		ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
 
-			t = ipt_get_target(e);
-			IP_NF_ASSERT(t->u.kernel.target);
+		t = ipt_get_target(e);
+		IP_NF_ASSERT(t->u.kernel.target);
 
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
-			/* The packet is traced: log it */
-			if (unlikely(skb->nf_trace))
-				trace_packet(skb, hook, in, out,
-					     table->name, private, e);
+		/* The packet is traced: log it */
+		if (unlikely(skb->nf_trace))
+			trace_packet(skb, hook, in, out,
+				     table->name, private, e);
 #endif
-			/* Standard target? */
-			if (!t->u.kernel.target->target) {
-				int v;
-
-				v = ((struct ipt_standard_target *)t)->verdict;
-				if (v < 0) {
-					/* Pop from stack? */
-					if (v != IPT_RETURN) {
-						verdict = (unsigned)(-v) - 1;
-						break;
-					}
-					e = back;
-					back = get_entry(table_base,
-							 back->comefrom);
-					continue;
-				}
-				if (table_base + v != (void *)e + e->next_offset
-				    && !(e->ip.flags & IPT_F_GOTO)) {
-					/* Save old back ptr in next entry */
-					struct ipt_entry *next
-						= (void *)e + e->next_offset;
-					next->comefrom
-						= (void *)back - table_base;
-					/* set back pointer to next entry */
-					back = next;
+		/* Standard target? */
+		if (!t->u.kernel.target->target) {
+			int v;
+
+			v = ((struct ipt_standard_target *)t)->verdict;
+			if (v < 0) {
+				/* Pop from stack? */
+				if (v != IPT_RETURN) {
+					verdict = (unsigned)(-v) - 1;
+					break;
 				}
+				e = back;
+				back = get_entry(table_base, back->comefrom);
+				continue;
+			}
+			if (table_base + v != ipt_next_entry(e)
+			    && !(e->ip.flags & IPT_F_GOTO)) {
+				/* Save old back ptr in next entry */
+				struct ipt_entry *next = ipt_next_entry(e);
+				next->comefrom = (void *)back - table_base;
+				/* set back pointer to next entry */
+				back = next;
+			}
+
+			e = get_entry(table_base, v);
+			continue;
+		}
+
+		/* Targets which reenter must return
+		   abs. verdicts */
+		tgpar.target   = t->u.kernel.target;
+		tgpar.targinfo = t->data;
+
 
-				e = get_entry(table_base, v);
-			} else {
-				/* Targets which reenter must return
-				   abs. verdicts */
-				tgpar.target   = t->u.kernel.target;
-				tgpar.targinfo = t->data;
 #ifdef CONFIG_NETFILTER_DEBUG
-				((struct ipt_entry *)table_base)->comefrom
-					= 0xeeeeeeec;
+		tb_comefrom = 0xeeeeeeec;
 #endif
-				verdict = t->u.kernel.target->target(skb,
-								     &tgpar);
+		verdict = t->u.kernel.target->target(skb, &tgpar);
 #ifdef CONFIG_NETFILTER_DEBUG
-				if (((struct ipt_entry *)table_base)->comefrom
-				    != 0xeeeeeeec
-				    && verdict == IPT_CONTINUE) {
-					printk("Target %s reentered!\n",
-					       t->u.kernel.target->name);
-					verdict = NF_DROP;
-				}
-				((struct ipt_entry *)table_base)->comefrom
-					= 0x57acc001;
+		if (tb_comefrom != 0xeeeeeeec && verdict == IPT_CONTINUE) {
+			printk("Target %s reentered!\n",
+			       t->u.kernel.target->name);
+			verdict = NF_DROP;
+		}
+		tb_comefrom = 0x57acc001;
 #endif
-				/* Target might have changed stuff. */
-				ip = ip_hdr(skb);
-				datalen = skb->len - ip->ihl * 4;
-
-				if (verdict == IPT_CONTINUE)
-					e = (void *)e + e->next_offset;
-				else
-					/* Verdict */
-					break;
-			}
-		} else {
+		/* Target might have changed stuff. */
+		ip = ip_hdr(skb);
+		datalen = skb->len - ip->ihl * 4;
 
-		no_match:
-			e = (void *)e + e->next_offset;
-		}
+		if (verdict == IPT_CONTINUE)
+			e = ipt_next_entry(e);
+		else
+			/* Verdict */
+			break;
 	} while (!hotdrop);
 	xt_info_rdunlock_bh();
 
@@ -444,6 +444,8 @@ ipt_do_table(struct sk_buff *skb,
 		return NF_DROP;
 	else return verdict;
 #endif
+
+#undef tb_comefrom
 }
 
 /* Figures out from what hook each rule can be called: returns 0 if
@@ -2158,7 +2160,7 @@ static bool icmp_checkentry(const struct xt_mtchk_param *par)
 static struct xt_target ipt_standard_target __read_mostly = {
 	.name		= IPT_STANDARD_TARGET,
 	.targetsize	= sizeof(int),
-	.family		= AF_INET,
+	.family		= NFPROTO_IPV4,
 #ifdef CONFIG_COMPAT
 	.compatsize	= sizeof(compat_int_t),
 	.compat_from_user = compat_standard_from_user,
@@ -2170,7 +2172,7 @@ static struct xt_target ipt_error_target __read_mostly = {
 	.name		= IPT_ERROR_TARGET,
 	.target		= ipt_error,
 	.targetsize	= IPT_FUNCTION_MAXNAMELEN,
-	.family		= AF_INET,
+	.family		= NFPROTO_IPV4,
 };
 
 static struct nf_sockopt_ops ipt_sockopts = {
@@ -2196,17 +2198,17 @@ static struct xt_match icmp_matchstruct __read_mostly = {
 	.matchsize	= sizeof(struct ipt_icmp),
 	.checkentry	= icmp_checkentry,
 	.proto		= IPPROTO_ICMP,
-	.family		= AF_INET,
+	.family		= NFPROTO_IPV4,
 };
 
 static int __net_init ip_tables_net_init(struct net *net)
 {
-	return xt_proto_init(net, AF_INET);
+	return xt_proto_init(net, NFPROTO_IPV4);
 }
 
 static void __net_exit ip_tables_net_exit(struct net *net)
 {
-	xt_proto_fini(net, AF_INET);
+	xt_proto_fini(net, NFPROTO_IPV4);
 }
 
 static struct pernet_operations ip_tables_net_ops = {
diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c
index f389f60cb10..dada0863946 100644
--- a/net/ipv4/netfilter/ipt_MASQUERADE.c
+++ b/net/ipv4/netfilter/ipt_MASQUERADE.c
@@ -27,9 +27,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
 MODULE_DESCRIPTION("Xtables: automatic-address SNAT");
 
-/* Lock protects masq region inside conntrack */
-static DEFINE_RWLOCK(masq_lock);
-
 /* FIXME: Multiple targets. --RR */
 static bool masquerade_tg_check(const struct xt_tgchk_param *par)
 {
@@ -72,16 +69,14 @@ masquerade_tg(struct sk_buff *skb, const struct xt_target_param *par)
 		return NF_ACCEPT;
 
 	mr = par->targinfo;
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 	newsrc = inet_select_addr(par->out, rt->rt_gateway, RT_SCOPE_UNIVERSE);
 	if (!newsrc) {
 		printk("MASQUERADE: %s ate my IP address\n", par->out->name);
 		return NF_DROP;
 	}
 
-	write_lock_bh(&masq_lock);
 	nat->masq_index = par->out->ifindex;
-	write_unlock_bh(&masq_lock);
 
 	/* Transfer from original range. */
 	newrange = ((struct nf_nat_range)
@@ -97,16 +92,11 @@ static int
 device_cmp(struct nf_conn *i, void *ifindex)
 {
 	const struct nf_conn_nat *nat = nfct_nat(i);
-	int ret;
 
 	if (!nat)
 		return 0;
 
-	read_lock_bh(&masq_lock);
-	ret = (nat->masq_index == (int)(long)ifindex);
-	read_unlock_bh(&masq_lock);
-
-	return ret;
+	return nat->masq_index == (int)(long)ifindex;
 }
 
 static int masq_device_event(struct notifier_block *this,
diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c
index 0b4b6e0ff2b..c93ae44bff2 100644
--- a/net/ipv4/netfilter/ipt_REJECT.c
+++ b/net/ipv4/netfilter/ipt_REJECT.c
@@ -108,17 +108,16 @@ static void send_reset(struct sk_buff *oldskb, int hook)
 		addr_type = RTN_LOCAL;
 
 	/* ip_route_me_harder expects skb->dst to be set */
-	dst_hold(oldskb->dst);
-	nskb->dst = oldskb->dst;
+	skb_dst_set(nskb, dst_clone(skb_dst(oldskb)));
 
 	if (ip_route_me_harder(nskb, addr_type))
 		goto free_nskb;
 
-	niph->ttl	= dst_metric(nskb->dst, RTAX_HOPLIMIT);
+	niph->ttl	= dst_metric(skb_dst(nskb), RTAX_HOPLIMIT);
 	nskb->ip_summed = CHECKSUM_NONE;
 
 	/* "Never happens" */
-	if (nskb->len > dst_mtu(nskb->dst))
+	if (nskb->len > dst_mtu(skb_dst(nskb)))
 		goto free_nskb;
 
 	nf_ct_attach(nskb, oldskb);
diff --git a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
index 23b2c2ee869..d71ba767734 100644
--- a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
@@ -82,18 +82,10 @@ static int icmp_packet(struct nf_conn *ct,
 		       u_int8_t pf,
 		       unsigned int hooknum)
 {
-	/* Try to delete connection immediately after all replies:
-	   won't actually vanish as we still have skb, and del_timer
-	   means this will only run once even if count hits zero twice
-	   (theoretically possible with SMP) */
-	if (CTINFO2DIR(ctinfo) == IP_CT_DIR_REPLY) {
-		if (atomic_dec_and_test(&ct->proto.icmp.count))
-			nf_ct_kill_acct(ct, ctinfo, skb);
-	} else {
-		atomic_inc(&ct->proto.icmp.count);
-		nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, ct);
-		nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmp_timeout);
-	}
+	/* Do not immediately delete the connection after the first
+	   successful reply to avoid excessive conntrackd traffic
+	   and also to handle correctly ICMP echo reply duplicates. */
+	nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmp_timeout);
 
 	return NF_ACCEPT;
 }
@@ -117,7 +109,6 @@ static bool icmp_new(struct nf_conn *ct, const struct sk_buff *skb,
 		nf_ct_dump_tuple_ip(&ct->tuplehash[0].tuple);
 		return false;
 	}
-	atomic_set(&ct->proto.icmp.count, 0);
 	return true;
 }
 
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index cf7a42bf982..155c008626c 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -140,7 +140,7 @@ nf_nat_mangle_tcp_packet(struct sk_buff *skb,
 			 const char *rep_buffer,
 			 unsigned int rep_len)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 	struct tcphdr *tcph;
 	int oldlen, datalen;
@@ -218,7 +218,7 @@ nf_nat_mangle_udp_packet(struct sk_buff *skb,
 			 const char *rep_buffer,
 			 unsigned int rep_len)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 	struct udphdr *udph;
 	int datalen, oldlen;
diff --git a/net/ipv4/netfilter/nf_nat_proto_sctp.c b/net/ipv4/netfilter/nf_nat_proto_sctp.c
index 65e470bc612..3fc598eeeb1 100644
--- a/net/ipv4/netfilter/nf_nat_proto_sctp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_sctp.c
@@ -33,6 +33,7 @@ sctp_manip_pkt(struct sk_buff *skb,
 	       enum nf_nat_manip_type maniptype)
 {
 	const struct iphdr *iph = (struct iphdr *)(skb->data + iphdroff);
+	struct sk_buff *frag;
 	sctp_sctphdr_t *hdr;
 	unsigned int hdroff = iphdroff + iph->ihl*4;
 	__be32 oldip, newip;
@@ -57,8 +58,8 @@ sctp_manip_pkt(struct sk_buff *skb,
 	}
 
 	crc32 = sctp_start_cksum((u8 *)hdr, skb_headlen(skb) - hdroff);
-	for (skb = skb_shinfo(skb)->frag_list; skb; skb = skb->next)
-		crc32 = sctp_update_cksum((u8 *)skb->data, skb_headlen(skb),
+	skb_walk_frags(skb, frag)
+		crc32 = sctp_update_cksum((u8 *)frag->data, skb_headlen(frag),
 					  crc32);
 	crc32 = sctp_end_cksum(crc32);
 	hdr->checksum = crc32;
diff --git a/net/ipv4/netfilter/nf_nat_standalone.c b/net/ipv4/netfilter/nf_nat_standalone.c
index b7dd695691a..5567bd0d075 100644
--- a/net/ipv4/netfilter/nf_nat_standalone.c
+++ b/net/ipv4/netfilter/nf_nat_standalone.c
@@ -167,10 +167,9 @@ nf_nat_in(unsigned int hooknum,
 
 	ret = nf_nat_fn(hooknum, skb, in, out, okfn);
 	if (ret != NF_DROP && ret != NF_STOLEN &&
-	    daddr != ip_hdr(skb)->daddr) {
-		dst_release(skb->dst);
-		skb->dst = NULL;
-	}
+	    daddr != ip_hdr(skb)->daddr)
+		skb_dst_drop(skb);
+
 	return ret;
 }
 
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index cf0cdeeb1db..f25542c48b7 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -90,14 +90,14 @@ static const struct file_operations sockstat_seq_fops = {
 
 /* snmp items */
 static const struct snmp_mib snmp4_ipstats_list[] = {
-	SNMP_MIB_ITEM("InReceives", IPSTATS_MIB_INRECEIVES),
+	SNMP_MIB_ITEM("InReceives", IPSTATS_MIB_INPKTS),
 	SNMP_MIB_ITEM("InHdrErrors", IPSTATS_MIB_INHDRERRORS),
 	SNMP_MIB_ITEM("InAddrErrors", IPSTATS_MIB_INADDRERRORS),
 	SNMP_MIB_ITEM("ForwDatagrams", IPSTATS_MIB_OUTFORWDATAGRAMS),
 	SNMP_MIB_ITEM("InUnknownProtos", IPSTATS_MIB_INUNKNOWNPROTOS),
 	SNMP_MIB_ITEM("InDiscards", IPSTATS_MIB_INDISCARDS),
 	SNMP_MIB_ITEM("InDelivers", IPSTATS_MIB_INDELIVERS),
-	SNMP_MIB_ITEM("OutRequests", IPSTATS_MIB_OUTREQUESTS),
+	SNMP_MIB_ITEM("OutRequests", IPSTATS_MIB_OUTPKTS),
 	SNMP_MIB_ITEM("OutDiscards", IPSTATS_MIB_OUTDISCARDS),
 	SNMP_MIB_ITEM("OutNoRoutes", IPSTATS_MIB_OUTNOROUTES),
 	SNMP_MIB_ITEM("ReasmTimeout", IPSTATS_MIB_REASMTIMEOUT),
@@ -118,6 +118,12 @@ static const struct snmp_mib snmp4_ipextstats_list[] = {
 	SNMP_MIB_ITEM("OutMcastPkts", IPSTATS_MIB_OUTMCASTPKTS),
 	SNMP_MIB_ITEM("InBcastPkts", IPSTATS_MIB_INBCASTPKTS),
 	SNMP_MIB_ITEM("OutBcastPkts", IPSTATS_MIB_OUTBCASTPKTS),
+	SNMP_MIB_ITEM("InOctets", IPSTATS_MIB_INOCTETS),
+	SNMP_MIB_ITEM("OutOctets", IPSTATS_MIB_OUTOCTETS),
+	SNMP_MIB_ITEM("InMcastOctets", IPSTATS_MIB_INMCASTOCTETS),
+	SNMP_MIB_ITEM("OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS),
+	SNMP_MIB_ITEM("InBcastOctets", IPSTATS_MIB_INBCASTOCTETS),
+	SNMP_MIB_ITEM("OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index f774651f0a4..3dc9171a272 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -343,7 +343,7 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length,
 
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
-	skb->dst = dst_clone(&rt->u.dst);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
 
 	skb_reset_network_header(skb);
 	iph = ip_hdr(skb);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 28205e5bfa9..cd76b3cb709 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -131,8 +131,8 @@ static int ip_rt_min_advmss __read_mostly	= 256;
 static int ip_rt_secret_interval __read_mostly	= 10 * 60 * HZ;
 static int rt_chain_length_max __read_mostly	= 20;
 
-static void rt_worker_func(struct work_struct *work);
-static DECLARE_DELAYED_WORK(expires_work, rt_worker_func);
+static struct delayed_work expires_work;
+static unsigned long expires_ljiffies;
 
 /*
  *	Interface to generic destination cache.
@@ -787,9 +787,12 @@ static void rt_check_expire(void)
 	struct rtable *rth, *aux, **rthp;
 	unsigned long samples = 0;
 	unsigned long sum = 0, sum2 = 0;
+	unsigned long delta;
 	u64 mult;
 
-	mult = ((u64)ip_rt_gc_interval) << rt_hash_log;
+	delta = jiffies - expires_ljiffies;
+	expires_ljiffies = jiffies;
+	mult = ((u64)delta) << rt_hash_log;
 	if (ip_rt_gc_timeout > 1)
 		do_div(mult, ip_rt_gc_timeout);
 	goal = (unsigned int)mult;
@@ -1064,7 +1067,8 @@ work_done:
 out:	return 0;
 }
 
-static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp)
+static int rt_intern_hash(unsigned hash, struct rtable *rt,
+			  struct rtable **rp, struct sk_buff *skb)
 {
 	struct rtable	*rth, **rthp;
 	unsigned long	now;
@@ -1114,7 +1118,10 @@ restart:
 			spin_unlock_bh(rt_hash_lock_addr(hash));
 
 			rt_drop(rt);
-			*rp = rth;
+			if (rp)
+				*rp = rth;
+			else
+				skb_dst_set(skb, &rth->u.dst);
 			return 0;
 		}
 
@@ -1210,7 +1217,10 @@ restart:
 	rcu_assign_pointer(rt_hash_table[hash].chain, rt);
 
 	spin_unlock_bh(rt_hash_lock_addr(hash));
-	*rp = rt;
+	if (rp)
+		*rp = rt;
+	else
+		skb_dst_set(skb, &rt->u.dst);
 	return 0;
 }
 
@@ -1407,7 +1417,7 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
 							&netevent);
 
 				rt_del(hash, rth);
-				if (!rt_intern_hash(hash, rt, &rt))
+				if (!rt_intern_hash(hash, rt, &rt, NULL))
 					ip_rt_put(rt);
 				goto do_next;
 			}
@@ -1473,7 +1483,7 @@ static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst)
 
 void ip_rt_send_redirect(struct sk_buff *skb)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct in_device *in_dev = in_dev_get(rt->u.dst.dev);
 
 	if (!in_dev)
@@ -1521,7 +1531,7 @@ out:
 
 static int ip_error(struct sk_buff *skb)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	unsigned long now;
 	int code;
 
@@ -1698,7 +1708,7 @@ static void ipv4_link_failure(struct sk_buff *skb)
 
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
 
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 	if (rt)
 		dst_set_expires(&rt->u.dst, 0);
 }
@@ -1858,7 +1868,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 
 	in_dev_put(in_dev);
 	hash = rt_hash(daddr, saddr, dev->ifindex, rt_genid(dev_net(dev)));
-	return rt_intern_hash(hash, rth, &skb->rtable);
+	return rt_intern_hash(hash, rth, NULL, skb);
 
 e_nobufs:
 	in_dev_put(in_dev);
@@ -2019,7 +2029,7 @@ static int ip_mkroute_input(struct sk_buff *skb,
 	/* put it into the cache */
 	hash = rt_hash(daddr, saddr, fl->iif,
 		       rt_genid(dev_net(rth->u.dst.dev)));
-	return rt_intern_hash(hash, rth, &skb->rtable);
+	return rt_intern_hash(hash, rth, NULL, skb);
 }
 
 /*
@@ -2175,7 +2185,7 @@ local_input:
 	}
 	rth->rt_type	= res.type;
 	hash = rt_hash(daddr, saddr, fl.iif, rt_genid(net));
-	err = rt_intern_hash(hash, rth, &skb->rtable);
+	err = rt_intern_hash(hash, rth, NULL, skb);
 	goto done;
 
 no_route:
@@ -2244,7 +2254,7 @@ int ip_route_input(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 			dst_use(&rth->u.dst, jiffies);
 			RT_CACHE_STAT_INC(in_hit);
 			rcu_read_unlock();
-			skb->rtable = rth;
+			skb_dst_set(skb, &rth->u.dst);
 			return 0;
 		}
 		RT_CACHE_STAT_INC(in_hlist_search);
@@ -2420,7 +2430,7 @@ static int ip_mkroute_output(struct rtable **rp,
 	if (err == 0) {
 		hash = rt_hash(oldflp->fl4_dst, oldflp->fl4_src, oldflp->oif,
 			       rt_genid(dev_net(dev_out)));
-		err = rt_intern_hash(hash, rth, rp);
+		err = rt_intern_hash(hash, rth, rp, NULL);
 	}
 
 	return err;
@@ -2763,7 +2773,7 @@ static int rt_fill_info(struct net *net,
 			struct sk_buff *skb, u32 pid, u32 seq, int event,
 			int nowait, unsigned int flags)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct rtmsg *r;
 	struct nlmsghdr *nlh;
 	long expires;
@@ -2907,7 +2917,7 @@ static int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 		err = ip_route_input(skb, dst, src, rtm->rtm_tos, dev);
 		local_bh_enable();
 
-		rt = skb->rtable;
+		rt = skb_rtable(skb);
 		if (err == 0 && rt->u.dst.error)
 			err = -rt->u.dst.error;
 	} else {
@@ -2927,7 +2937,7 @@ static int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	if (err)
 		goto errout_free;
 
-	skb->rtable = rt;
+	skb_dst_set(skb, &rt->u.dst);
 	if (rtm->rtm_flags & RTM_F_NOTIFY)
 		rt->rt_flags |= RTCF_NOTIFY;
 
@@ -2968,15 +2978,15 @@ int ip_rt_dump(struct sk_buff *skb,  struct netlink_callback *cb)
 				continue;
 			if (rt_is_expired(rt))
 				continue;
-			skb->dst = dst_clone(&rt->u.dst);
+			skb_dst_set(skb, dst_clone(&rt->u.dst));
 			if (rt_fill_info(net, skb, NETLINK_CB(cb->skb).pid,
 					 cb->nlh->nlmsg_seq, RTM_NEWROUTE,
 					 1, NLM_F_MULTI) <= 0) {
-				dst_release(xchg(&skb->dst, NULL));
+				skb_dst_drop(skb);
 				rcu_read_unlock_bh();
 				goto done;
 			}
-			dst_release(xchg(&skb->dst, NULL));
+			skb_dst_drop(skb);
 		}
 		rcu_read_unlock_bh();
 	}
@@ -3390,6 +3400,8 @@ int __init ip_rt_init(void)
 	/* All the timers, started at system startup tend
 	   to synchronize. Perturb it a bit.
 	 */
+	INIT_DELAYED_WORK_DEFERRABLE(&expires_work, rt_worker_func);
+	expires_ljiffies = jiffies;
 	schedule_delayed_work(&expires_work,
 		net_random() % ip_rt_gc_interval + ip_rt_gc_interval);
 
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index b35a950d2e0..cd2b97f1b6e 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -161,13 +161,12 @@ static __u16 const msstab[] = {
  */
 __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
 {
-	struct tcp_sock *tp = tcp_sk(sk);
 	const struct iphdr *iph = ip_hdr(skb);
 	const struct tcphdr *th = tcp_hdr(skb);
 	int mssind;
 	const __u16 mss = *mssp;
 
-	tp->last_synq_overflow = jiffies;
+	tcp_synq_overflow(sk);
 
 	/* XXX sort msstab[] by probability?  Binary search? */
 	for (mssind = 0; mss > msstab[mssind + 1]; mssind++)
@@ -268,7 +267,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	if (!sysctl_tcp_syncookies || !th->ack)
 		goto out;
 
-	if (time_after(jiffies, tp->last_synq_overflow + TCP_TIMEOUT_INIT) ||
+	if (tcp_synq_no_recent_overflow(sk) ||
 	    (mss = cookie_check(skb, cookie)) == 0) {
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESFAILED);
 		goto out;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 7a0f0b27bf1..17b89c523f9 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -439,12 +439,14 @@ int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg)
 			 !tp->urg_data ||
 			 before(tp->urg_seq, tp->copied_seq) ||
 			 !before(tp->urg_seq, tp->rcv_nxt)) {
+			struct sk_buff *skb;
+
 			answ = tp->rcv_nxt - tp->copied_seq;
 
 			/* Subtract 1, if FIN is in queue. */
-			if (answ && !skb_queue_empty(&sk->sk_receive_queue))
-				answ -=
-		       tcp_hdr((struct sk_buff *)sk->sk_receive_queue.prev)->fin;
+			skb = skb_peek_tail(&sk->sk_receive_queue);
+			if (answ && skb)
+				answ -= tcp_hdr(skb)->fin;
 		} else
 			answ = tp->urg_seq - tp->copied_seq;
 		release_sock(sk);
@@ -1382,11 +1384,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 		/* Next get a buffer. */
 
-		skb = skb_peek(&sk->sk_receive_queue);
-		do {
-			if (!skb)
-				break;
-
+		skb_queue_walk(&sk->sk_receive_queue, skb) {
 			/* Now that we have two receive queues this
 			 * shouldn't happen.
 			 */
@@ -1403,8 +1401,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 			if (tcp_hdr(skb)->fin)
 				goto found_fin_ok;
 			WARN_ON(!(flags & MSG_PEEK));
-			skb = skb->next;
-		} while (skb != (struct sk_buff *)&sk->sk_receive_queue);
+		}
 
 		/* Well, if we have backlog, try to process it now yet. */
 
@@ -2518,20 +2515,30 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 	unsigned int thlen;
 	unsigned int flags;
 	unsigned int mss = 1;
+	unsigned int hlen;
+	unsigned int off;
 	int flush = 1;
 	int i;
 
-	th = skb_gro_header(skb, sizeof(*th));
-	if (unlikely(!th))
-		goto out;
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*th);
+	th = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		th = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!th))
+			goto out;
+	}
 
 	thlen = th->doff * 4;
 	if (thlen < sizeof(*th))
 		goto out;
 
-	th = skb_gro_header(skb, thlen);
-	if (unlikely(!th))
-		goto out;
+	hlen = off + thlen;
+	if (skb_gro_header_hard(skb, hlen)) {
+		th = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!th))
+			goto out;
+	}
 
 	skb_gro_pull(skb, thlen);
 
@@ -2544,7 +2551,7 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 		th2 = tcp_hdr(p);
 
-		if ((th->source ^ th2->source) | (th->dest ^ th2->dest)) {
+		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
 			NAPI_GRO_CB(p)->same_flow = 0;
 			continue;
 		}
@@ -2559,14 +2566,14 @@ found:
 	flush |= flags & TCP_FLAG_CWR;
 	flush |= (flags ^ tcp_flag_word(th2)) &
 		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH);
-	flush |= (th->ack_seq ^ th2->ack_seq) | (th->window ^ th2->window);
-	for (i = sizeof(*th); !flush && i < thlen; i += 4)
+	flush |= th->ack_seq ^ th2->ack_seq;
+	for (i = sizeof(*th); i < thlen; i += 4)
 		flush |= *(u32 *)((u8 *)th + i) ^
 			 *(u32 *)((u8 *)th2 + i);
 
 	mss = skb_shinfo(p)->gso_size;
 
-	flush |= (len > mss) | !len;
+	flush |= (len - 1) >= mss;
 	flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq);
 
 	if (flush || skb_gro_receive(head, skb)) {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index eec3e6f9956..2bdb0da237e 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -77,7 +77,7 @@ int sysctl_tcp_window_scaling __read_mostly = 1;
 int sysctl_tcp_sack __read_mostly = 1;
 int sysctl_tcp_fack __read_mostly = 1;
 int sysctl_tcp_reordering __read_mostly = TCP_FASTRETRANS_THRESH;
-int sysctl_tcp_ecn __read_mostly;
+int sysctl_tcp_ecn __read_mostly = 2;
 int sysctl_tcp_dsack __read_mostly = 1;
 int sysctl_tcp_app_win __read_mostly = 31;
 int sysctl_tcp_adv_win_scale __read_mostly = 2;
@@ -4426,7 +4426,7 @@ drop:
 		}
 		__skb_queue_head(&tp->out_of_order_queue, skb);
 	} else {
-		struct sk_buff *skb1 = tp->out_of_order_queue.prev;
+		struct sk_buff *skb1 = skb_peek_tail(&tp->out_of_order_queue);
 		u32 seq = TCP_SKB_CB(skb)->seq;
 		u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
@@ -4443,15 +4443,18 @@ drop:
 		}
 
 		/* Find place to insert this segment. */
-		do {
+		while (1) {
 			if (!after(TCP_SKB_CB(skb1)->seq, seq))
 				break;
-		} while ((skb1 = skb1->prev) !=
-			 (struct sk_buff *)&tp->out_of_order_queue);
+			if (skb_queue_is_first(&tp->out_of_order_queue, skb1)) {
+				skb1 = NULL;
+				break;
+			}
+			skb1 = skb_queue_prev(&tp->out_of_order_queue, skb1);
+		}
 
 		/* Do skb overlap to previous one? */
-		if (skb1 != (struct sk_buff *)&tp->out_of_order_queue &&
-		    before(seq, TCP_SKB_CB(skb1)->end_seq)) {
+		if (skb1 && before(seq, TCP_SKB_CB(skb1)->end_seq)) {
 			if (!after(end_seq, TCP_SKB_CB(skb1)->end_seq)) {
 				/* All the bits are present. Drop. */
 				__kfree_skb(skb);
@@ -4463,15 +4466,26 @@ drop:
 				tcp_dsack_set(sk, seq,
 					      TCP_SKB_CB(skb1)->end_seq);
 			} else {
-				skb1 = skb1->prev;
+				if (skb_queue_is_first(&tp->out_of_order_queue,
+						       skb1))
+					skb1 = NULL;
+				else
+					skb1 = skb_queue_prev(
+						&tp->out_of_order_queue,
+						skb1);
 			}
 		}
-		__skb_queue_after(&tp->out_of_order_queue, skb1, skb);
+		if (!skb1)
+			__skb_queue_head(&tp->out_of_order_queue, skb);
+		else
+			__skb_queue_after(&tp->out_of_order_queue, skb1, skb);
 
 		/* And clean segments covered by new one as whole. */
-		while ((skb1 = skb->next) !=
-		       (struct sk_buff *)&tp->out_of_order_queue &&
-		       after(end_seq, TCP_SKB_CB(skb1)->seq)) {
+		while (!skb_queue_is_last(&tp->out_of_order_queue, skb)) {
+			skb1 = skb_queue_next(&tp->out_of_order_queue, skb);
+
+			if (!after(end_seq, TCP_SKB_CB(skb1)->seq))
+				break;
 			if (before(end_seq, TCP_SKB_CB(skb1)->end_seq)) {
 				tcp_dsack_extend(sk, TCP_SKB_CB(skb1)->seq,
 						 end_seq);
@@ -4492,7 +4506,10 @@ add_sack:
 static struct sk_buff *tcp_collapse_one(struct sock *sk, struct sk_buff *skb,
 					struct sk_buff_head *list)
 {
-	struct sk_buff *next = skb->next;
+	struct sk_buff *next = NULL;
+
+	if (!skb_queue_is_last(list, skb))
+		next = skb_queue_next(list, skb);
 
 	__skb_unlink(skb, list);
 	__kfree_skb(skb);
@@ -4503,6 +4520,9 @@ static struct sk_buff *tcp_collapse_one(struct sock *sk, struct sk_buff *skb,
 
 /* Collapse contiguous sequence of skbs head..tail with
  * sequence numbers start..end.
+ *
+ * If tail is NULL, this means until the end of the list.
+ *
  * Segments with FIN/SYN are not collapsed (only because this
  * simplifies code)
  */
@@ -4511,15 +4531,23 @@ tcp_collapse(struct sock *sk, struct sk_buff_head *list,
 	     struct sk_buff *head, struct sk_buff *tail,
 	     u32 start, u32 end)
 {
-	struct sk_buff *skb;
+	struct sk_buff *skb, *n;
+	bool end_of_skbs;
 
 	/* First, check that queue is collapsible and find
 	 * the point where collapsing can be useful. */
-	for (skb = head; skb != tail;) {
+	skb = head;
+restart:
+	end_of_skbs = true;
+	skb_queue_walk_from_safe(list, skb, n) {
+		if (skb == tail)
+			break;
 		/* No new bits? It is possible on ofo queue. */
 		if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
 			skb = tcp_collapse_one(sk, skb, list);
-			continue;
+			if (!skb)
+				break;
+			goto restart;
 		}
 
 		/* The first skb to collapse is:
@@ -4529,16 +4557,24 @@ tcp_collapse(struct sock *sk, struct sk_buff_head *list,
 		 */
 		if (!tcp_hdr(skb)->syn && !tcp_hdr(skb)->fin &&
 		    (tcp_win_from_space(skb->truesize) > skb->len ||
-		     before(TCP_SKB_CB(skb)->seq, start) ||
-		     (skb->next != tail &&
-		      TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb->next)->seq)))
+		     before(TCP_SKB_CB(skb)->seq, start))) {
+			end_of_skbs = false;
 			break;
+		}
+
+		if (!skb_queue_is_last(list, skb)) {
+			struct sk_buff *next = skb_queue_next(list, skb);
+			if (next != tail &&
+			    TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(next)->seq) {
+				end_of_skbs = false;
+				break;
+			}
+		}
 
 		/* Decided to skip this, advance start seq. */
 		start = TCP_SKB_CB(skb)->end_seq;
-		skb = skb->next;
 	}
-	if (skb == tail || tcp_hdr(skb)->syn || tcp_hdr(skb)->fin)
+	if (end_of_skbs || tcp_hdr(skb)->syn || tcp_hdr(skb)->fin)
 		return;
 
 	while (before(start, end)) {
@@ -4583,7 +4619,8 @@ tcp_collapse(struct sock *sk, struct sk_buff_head *list,
 			}
 			if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
 				skb = tcp_collapse_one(sk, skb, list);
-				if (skb == tail ||
+				if (!skb ||
+				    skb == tail ||
 				    tcp_hdr(skb)->syn ||
 				    tcp_hdr(skb)->fin)
 					return;
@@ -4610,17 +4647,21 @@ static void tcp_collapse_ofo_queue(struct sock *sk)
 	head = skb;
 
 	for (;;) {
-		skb = skb->next;
+		struct sk_buff *next = NULL;
+
+		if (!skb_queue_is_last(&tp->out_of_order_queue, skb))
+			next = skb_queue_next(&tp->out_of_order_queue, skb);
+		skb = next;
 
 		/* Segment is terminated when we see gap or when
 		 * we are at the end of all the queue. */
-		if (skb == (struct sk_buff *)&tp->out_of_order_queue ||
+		if (!skb ||
 		    after(TCP_SKB_CB(skb)->seq, end) ||
 		    before(TCP_SKB_CB(skb)->end_seq, start)) {
 			tcp_collapse(sk, &tp->out_of_order_queue,
 				     head, skb, start, end);
 			head = skb;
-			if (skb == (struct sk_buff *)&tp->out_of_order_queue)
+			if (!skb)
 				break;
 			/* Start new segment */
 			start = TCP_SKB_CB(skb)->seq;
@@ -4681,10 +4722,11 @@ static int tcp_prune_queue(struct sock *sk)
 		tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss);
 
 	tcp_collapse_ofo_queue(sk);
-	tcp_collapse(sk, &sk->sk_receive_queue,
-		     sk->sk_receive_queue.next,
-		     (struct sk_buff *)&sk->sk_receive_queue,
-		     tp->copied_seq, tp->rcv_nxt);
+	if (!skb_queue_empty(&sk->sk_receive_queue))
+		tcp_collapse(sk, &sk->sk_receive_queue,
+			     skb_peek(&sk->sk_receive_queue),
+			     NULL,
+			     tp->copied_seq, tp->rcv_nxt);
 	sk_mem_reclaim(sk);
 
 	if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf)
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 5d427f86b41..5a1ca2698c8 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -546,7 +546,7 @@ static void tcp_v4_send_reset(struct sock *sk, struct sk_buff *skb)
 	if (th->rst)
 		return;
 
-	if (skb->rtable->rt_type != RTN_LOCAL)
+	if (skb_rtable(skb)->rt_type != RTN_LOCAL)
 		return;
 
 	/* Swap the send and the receive. */
@@ -590,7 +590,7 @@ static void tcp_v4_send_reset(struct sock *sk, struct sk_buff *skb)
 	arg.csumoffset = offsetof(struct tcphdr, check) / 2;
 	arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
 
-	net = dev_net(skb->dst->dev);
+	net = dev_net(skb_dst(skb)->dev);
 	ip_send_reply(net->ipv4.tcp_sock, skb,
 		      &arg, arg.iov[0].iov_len);
 
@@ -617,7 +617,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
 			];
 	} rep;
 	struct ip_reply_arg arg;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	memset(&rep.th, 0, sizeof(struct tcphdr));
 	memset(&arg, 0, sizeof(arg));
@@ -1185,7 +1185,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 #endif
 
 	/* Never answer to SYNs send to broadcast or multicast */
-	if (skb->rtable->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+	if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
 		goto drop;
 
 	/* TW buckets are converted to open requests without
@@ -1593,7 +1593,7 @@ process:
 #endif
 		{
 			if (!tcp_prequeue(sk, skb))
-			ret = tcp_v4_do_rcv(sk, skb);
+				ret = tcp_v4_do_rcv(sk, skb);
 		}
 	} else
 		sk_add_backlog(sk, skb);
@@ -2343,7 +2343,7 @@ void tcp4_proc_exit(void)
 
 struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 {
-	struct iphdr *iph = ip_hdr(skb);
+	struct iphdr *iph = skb_gro_network_header(skb);
 
 	switch (skb->ip_summed) {
 	case CHECKSUM_COMPLETE:
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 59aec609cec..416fc4c2e7e 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -288,7 +288,7 @@ static inline void TCP_ECN_send_syn(struct sock *sk, struct sk_buff *skb)
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	tp->ecn_flags = 0;
-	if (sysctl_tcp_ecn) {
+	if (sysctl_tcp_ecn == 1) {
 		TCP_SKB_CB(skb)->flags |= TCPCB_FLAG_ECE | TCPCB_FLAG_CWR;
 		tp->ecn_flags = TCP_ECN_OK;
 	}
@@ -2202,7 +2202,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 	/* Reserve space for headers. */
 	skb_reserve(skb, MAX_TCP_HEADER);
 
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	mss = dst_metric(dst, RTAX_ADVMSS);
 	if (tp->rx_opt.user_mss && tp->rx_opt.user_mss < mss)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 7a1d1ce22e6..8f4158d7c9a 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -328,7 +328,7 @@ static inline struct sock *__udp4_lib_lookup_skb(struct sk_buff *skb,
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
 	else
-		return __udp4_lib_lookup(dev_net(skb->dst->dev), iph->saddr, sport,
+		return __udp4_lib_lookup(dev_net(skb_dst(skb)->dev), iph->saddr, sport,
 					 iph->daddr, dport, inet_iif(skb),
 					 udptable);
 }
@@ -1237,7 +1237,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	struct sock *sk;
 	struct udphdr *uh;
 	unsigned short ulen;
-	struct rtable *rt = (struct rtable*)skb->dst;
+	struct rtable *rt = skb_rtable(skb);
 	__be32 saddr, daddr;
 	struct net *net = dev_net(skb->dev);
 
diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c
index 4ec2162a437..f9f922a0ba8 100644
--- a/net/ipv4/xfrm4_input.c
+++ b/net/ipv4/xfrm4_input.c
@@ -23,7 +23,7 @@ int xfrm4_extract_input(struct xfrm_state *x, struct sk_buff *skb)
 
 static inline int xfrm4_rcv_encap_finish(struct sk_buff *skb)
 {
-	if (skb->dst == NULL) {
+	if (skb_dst(skb) == NULL) {
 		const struct iphdr *iph = ip_hdr(skb);
 
 		if (ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c
index 7135279f3f8..3444f3b34ec 100644
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -28,7 +28,7 @@ static inline void ipip_ecn_decapsulate(struct sk_buff *skb)
  */
 static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct iphdr *top_iph;
 	int flags;
 
@@ -41,7 +41,7 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 	top_iph->ihl = 5;
 	top_iph->version = 4;
 
-	top_iph->protocol = xfrm_af2proto(skb->dst->ops->family);
+	top_iph->protocol = xfrm_af2proto(skb_dst(skb)->ops->family);
 
 	/* DS disclosed */
 	top_iph->tos = INET_ECN_encapsulate(XFRM_MODE_SKB_CB(skb)->tos,
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index 8c3180adddb..c908bd99bcb 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -29,7 +29,7 @@ static int xfrm4_tunnel_check_size(struct sk_buff *skb)
 	if (!(ip_hdr(skb)->frag_off & htons(IP_DF)) || skb->local_df)
 		goto out;
 
-	dst = skb->dst;
+	dst = skb_dst(skb);
 	mtu = dst_mtu(dst);
 	if (skb->len > mtu) {
 		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
@@ -72,7 +72,7 @@ EXPORT_SYMBOL(xfrm4_prepare_output);
 static int xfrm4_output_finish(struct sk_buff *skb)
 {
 #ifdef CONFIG_NETFILTER
-	if (!skb->dst->xfrm) {
+	if (!skb_dst(skb)->xfrm) {
 		IPCB(skb)->flags |= IPSKB_REROUTED;
 		return dst_output(skb);
 	}
@@ -87,6 +87,6 @@ static int xfrm4_output_finish(struct sk_buff *skb)
 int xfrm4_output(struct sk_buff *skb)
 {
 	return NF_HOOK_COND(PF_INET, NF_INET_POST_ROUTING, skb,
-			    NULL, skb->dst->dev, xfrm4_output_finish,
+			    NULL, skb_dst(skb)->dev, xfrm4_output_finish,
 			    !(IPCB(skb)->flags & IPSKB_REROUTED));
 }
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ca8cb326d1d..ead6c7a42f4 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -168,7 +168,7 @@ config IPV6_SIT
 	  into IPv4 packets. This is useful if you want to connect two IPv6
 	  networks over an IPv4-only path.
 
-	  Saying M here will produce a module called sit.ko. If unsure, say Y.
+	  Saying M here will produce a module called sit. If unsure, say Y.
 
 config IPV6_NDISC_NODETYPE
 	bool
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a8218bc1806..8c1e86afbbf 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -503,7 +503,7 @@ static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 		return 0;
 
 	if (!rtnl_trylock())
-		return -ERESTARTSYS;
+		return restart_syscall();
 
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
@@ -591,7 +591,6 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen,
 {
 	struct inet6_ifaddr *ifa = NULL;
 	struct rt6_info *rt;
-	struct net *net = dev_net(idev->dev);
 	int hash;
 	int err = 0;
 	int addr_type = ipv6_addr_type(addr);
@@ -608,7 +607,7 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen,
 		goto out2;
 	}
 
-	if (idev->cnf.disable_ipv6 || net->ipv6.devconf_all->disable_ipv6) {
+	if (idev->cnf.disable_ipv6) {
 		err = -EACCES;
 		goto out2;
 	}
@@ -1520,6 +1519,8 @@ static int addrconf_ifid_infiniband(u8 *eui, struct net_device *dev)
 
 int __ipv6_isatap_ifid(u8 *eui, __be32 addr)
 {
+	if (addr == 0)
+		return -1;
 	eui[0] = (ipv4_is_zeronet(addr) || ipv4_is_private_10(addr) ||
 		  ipv4_is_loopback(addr) || ipv4_is_linklocal_169(addr) ||
 		  ipv4_is_private_172(addr) || ipv4_is_test_192(addr) ||
@@ -1750,6 +1751,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 	__u32 prefered_lft;
 	int addr_type;
 	struct inet6_dev *in6_dev;
+	struct net *net = dev_net(dev);
 
 	pinfo = (struct prefix_info *) opt;
 
@@ -1807,7 +1809,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 		if (addrconf_finite_timeout(rt_expires))
 			rt_expires *= HZ;
 
-		rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
+		rt = rt6_lookup(net, &pinfo->prefix, NULL,
 				dev->ifindex, 1);
 
 		if (rt && addrconf_is_prefix_route(rt)) {
@@ -1844,7 +1846,6 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 		struct inet6_ifaddr * ifp;
 		struct in6_addr addr;
 		int create = 0, update_lft = 0;
-		struct net *net = dev_net(dev);
 
 		if (pinfo->prefix_len == 64) {
 			memcpy(&addr, &pinfo->prefix, 8);
@@ -2765,7 +2766,7 @@ static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags)
 		spin_unlock_bh(&ifp->lock);
 		read_unlock_bh(&idev->lock);
 		/*
-		 * If the defice is not ready:
+		 * If the device is not ready:
 		 * - keep it tentative if it is a permanent address.
 		 * - otherwise, kill it.
 		 */
@@ -3986,6 +3987,75 @@ static int addrconf_sysctl_forward_strategy(ctl_table *table,
 	return addrconf_fixup_forwarding(table, valp, val);
 }
 
+static void dev_disable_change(struct inet6_dev *idev)
+{
+	if (!idev || !idev->dev)
+		return;
+
+	if (idev->cnf.disable_ipv6)
+		addrconf_notify(NULL, NETDEV_DOWN, idev->dev);
+	else
+		addrconf_notify(NULL, NETDEV_UP, idev->dev);
+}
+
+static void addrconf_disable_change(struct net *net, __s32 newf)
+{
+	struct net_device *dev;
+	struct inet6_dev *idev;
+
+	read_lock(&dev_base_lock);
+	for_each_netdev(net, dev) {
+		rcu_read_lock();
+		idev = __in6_dev_get(dev);
+		if (idev) {
+			int changed = (!idev->cnf.disable_ipv6) ^ (!newf);
+			idev->cnf.disable_ipv6 = newf;
+			if (changed)
+				dev_disable_change(idev);
+		}
+		rcu_read_unlock();
+	}
+	read_unlock(&dev_base_lock);
+}
+
+static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old)
+{
+	struct net *net;
+
+	net = (struct net *)table->extra2;
+
+	if (p == &net->ipv6.devconf_dflt->disable_ipv6)
+		return 0;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (p == &net->ipv6.devconf_all->disable_ipv6) {
+		__s32 newf = net->ipv6.devconf_all->disable_ipv6;
+		net->ipv6.devconf_dflt->disable_ipv6 = newf;
+		addrconf_disable_change(net, newf);
+	} else if ((!*p) ^ (!old))
+		dev_disable_change((struct inet6_dev *)table->extra1);
+
+	rtnl_unlock();
+	return 0;
+}
+
+static
+int addrconf_sysctl_disable(ctl_table *ctl, int write, struct file * filp,
+			    void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	int *valp = ctl->data;
+	int val = *valp;
+	int ret;
+
+	ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+
+	if (write)
+		ret = addrconf_disable_ipv6(ctl, valp, val);
+	return ret;
+}
+
 static struct addrconf_sysctl_table
 {
 	struct ctl_table_header *sysctl_header;
@@ -4223,7 +4293,8 @@ static struct addrconf_sysctl_table
 			.data		=	&ipv6_devconf.disable_ipv6,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
-			.proc_handler	=	proc_dointvec,
+			.proc_handler	=	addrconf_sysctl_disable,
+			.strategy	=	sysctl_intvec,
 		},
 		{
 			.ctl_name	=	CTL_UNNUMBERED,
@@ -4344,6 +4415,10 @@ static int addrconf_init_net(struct net *net)
 		dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
 		if (dflt == NULL)
 			goto err_alloc_dflt;
+	} else {
+		/* these will be inherited by all namespaces */
+		dflt->autoconf = ipv6_defaults.autoconf;
+		dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
 	}
 
 	net->ipv6.devconf_all = all;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 61f55386a23..85b3d0036af 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,9 +72,21 @@ MODULE_LICENSE("GPL");
 static struct list_head inetsw6[SOCK_MAX];
 static DEFINE_SPINLOCK(inetsw6_lock);
 
-static int disable_ipv6 = 0;
-module_param_named(disable, disable_ipv6, int, 0);
-MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+struct ipv6_params ipv6_defaults = {
+	.disable_ipv6 = 0,
+	.autoconf = 1,
+};
+
+static int disable_ipv6_mod = 0;
+
+module_param_named(disable, disable_ipv6_mod, int, 0444);
+MODULE_PARM_DESC(disable, "Disable IPv6 module such that it is non-functional");
+
+module_param_named(disable_ipv6, ipv6_defaults.disable_ipv6, int, 0444);
+MODULE_PARM_DESC(disable_ipv6, "Disable IPv6 on all interfaces");
+
+module_param_named(autoconf, ipv6_defaults.autoconf, int, 0444);
+MODULE_PARM_DESC(autoconf, "Enable IPv6 address autoconfiguration on all interfaces");
 
 static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
 {
@@ -817,13 +829,20 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
 	struct sk_buff *p;
 	struct ipv6hdr *iph;
 	unsigned int nlen;
+	unsigned int hlen;
+	unsigned int off;
 	int flush = 1;
 	int proto;
 	__wsum csum;
 
-	iph = skb_gro_header(skb, sizeof(*iph));
-	if (unlikely(!iph))
-		goto out;
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*iph);
+	iph = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		iph = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!iph))
+			goto out;
+	}
 
 	skb_gro_pull(skb, sizeof(*iph));
 	skb_set_transport_header(skb, skb_gro_offset(skb));
@@ -1031,7 +1050,7 @@ static int __init inet6_init(void)
 	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
 		INIT_LIST_HEAD(r);
 
-	if (disable_ipv6) {
+	if (disable_ipv6_mod) {
 		printk(KERN_INFO
 		       "IPv6: Loaded, but administratively disabled, "
 		       "reboot required to enable\n");
@@ -1220,7 +1239,7 @@ module_init(inet6_init);
 
 static void __exit inet6_exit(void)
 {
-	if (disable_ipv6)
+	if (disable_ipv6_mod)
 		return;
 
 	/* First of all disallow new sockets creation. */
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 1c7f400a3cf..4aae658e550 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -277,7 +277,7 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
 	if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
 	    !pskb_may_pull(skb, (skb_transport_offset(skb) +
 				 ((skb_transport_header(skb)[1] + 1) << 3)))) {
-		IP6_INC_STATS_BH(dev_net(skb->dst->dev), ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -288,7 +288,7 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
 	dstbuf = opt->dst1;
 #endif
 
-	dst = dst_clone(skb->dst);
+	dst = dst_clone(skb_dst(skb));
 	if (ip6_parse_tlv(tlvprocdestopt_lst, skb)) {
 		dst_release(dst);
 		skb->transport_header += (skb_transport_header(skb)[1] + 1) << 3;
@@ -333,7 +333,7 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
 	if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
 	    !pskb_may_pull(skb, (skb_transport_offset(skb) +
 				 ((skb_transport_header(skb)[1] + 1) << 3)))) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -343,7 +343,7 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
 
 	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr) ||
 	    skb->pkt_type != PACKET_HOST) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INADDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -358,7 +358,7 @@ looped_back:
 			 * processed by own
 			 */
 			if (!addr) {
-				IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+				IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 						 IPSTATS_MIB_INADDRERRORS);
 				kfree_skb(skb);
 				return -1;
@@ -384,7 +384,7 @@ looped_back:
 			goto unknown_rh;
 		/* Silently discard invalid RTH type 2 */
 		if (hdr->hdrlen != 2 || hdr->segments_left != 1) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INHDRERRORS);
 			kfree_skb(skb);
 			return -1;
@@ -403,7 +403,7 @@ looped_back:
 	n = hdr->hdrlen >> 1;
 
 	if (hdr->segments_left > n) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 				  ((&hdr->segments_left) -
@@ -417,7 +417,7 @@ looped_back:
 	if (skb_cloned(skb)) {
 		/* the copy is a forwarded packet */
 		if (pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_OUTDISCARDS);
 			kfree_skb(skb);
 			return -1;
@@ -440,13 +440,13 @@ looped_back:
 		if (xfrm6_input_addr(skb, (xfrm_address_t *)addr,
 				     (xfrm_address_t *)&ipv6_hdr(skb)->saddr,
 				     IPPROTO_ROUTING) < 0) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INADDRERRORS);
 			kfree_skb(skb);
 			return -1;
 		}
-		if (!ipv6_chk_home_addr(dev_net(skb->dst->dev), addr)) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		if (!ipv6_chk_home_addr(dev_net(skb_dst(skb)->dev), addr)) {
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INADDRERRORS);
 			kfree_skb(skb);
 			return -1;
@@ -458,7 +458,7 @@ looped_back:
 	}
 
 	if (ipv6_addr_is_multicast(addr)) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INADDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -468,17 +468,17 @@ looped_back:
 	ipv6_addr_copy(addr, &ipv6_hdr(skb)->daddr);
 	ipv6_addr_copy(&ipv6_hdr(skb)->daddr, &daddr);
 
-	dst_release(xchg(&skb->dst, NULL));
+	skb_dst_drop(skb);
 	ip6_route_input(skb);
-	if (skb->dst->error) {
+	if (skb_dst(skb)->error) {
 		skb_push(skb, skb->data - skb_network_header(skb));
 		dst_input(skb);
 		return -1;
 	}
 
-	if (skb->dst->dev->flags&IFF_LOOPBACK) {
+	if (skb_dst(skb)->dev->flags&IFF_LOOPBACK) {
 		if (ipv6_hdr(skb)->hop_limit <= 1) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INHDRERRORS);
 			icmpv6_send(skb, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT,
 				    0, skb->dev);
@@ -494,7 +494,7 @@ looped_back:
 	return -1;
 
 unknown_rh:
-	IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INHDRERRORS);
 	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 			  (&hdr->type) - skb_network_header(skb));
 	return -1;
@@ -552,11 +552,11 @@ void ipv6_exthdrs_exit(void)
  **********************************/
 
 /*
- * Note: we cannot rely on skb->dst before we assign it in ip6_route_input().
+ * Note: we cannot rely on skb_dst(skb) before we assign it in ip6_route_input().
  */
 static inline struct inet6_dev *ipv6_skb_idev(struct sk_buff *skb)
 {
-	return skb->dst ? ip6_dst_idev(skb->dst) : __in6_dev_get(skb->dev);
+	return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev);
 }
 
 /* Router Alert as of RFC 2711 */
@@ -581,7 +581,7 @@ static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff)
 {
 	const unsigned char *nh = skb_network_header(skb);
 	u32 pkt_len;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
 		LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index f5de3f9dc69..00a7a5e4ac9 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -151,7 +151,7 @@ static const struct nla_policy fib6_rule_policy[FRA_MAX+1] = {
 };
 
 static int fib6_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
-			       struct nlmsghdr *nlh, struct fib_rule_hdr *frh,
+			       struct fib_rule_hdr *frh,
 			       struct nlattr **tb)
 {
 	int err = -EINVAL;
@@ -211,7 +211,7 @@ static int fib6_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh,
 }
 
 static int fib6_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
-			  struct nlmsghdr *nlh, struct fib_rule_hdr *frh)
+			  struct fib_rule_hdr *frh)
 {
 	struct fib6_rule *rule6 = (struct fib6_rule *) rule;
 
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 3c3732d50c1..cc4797dd832 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -228,7 +228,7 @@ int inet6_csk_xmit(struct sk_buff *skb, int ipfragok)
 		__inet6_csk_dst_store(sk, dst, NULL, NULL);
 	}
 
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	/* Restore final destination back after routing done */
 	ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 8f04bd9da27..c3a07d75b5f 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -48,7 +48,7 @@
 
 inline int ip6_rcv_finish( struct sk_buff *skb)
 {
-	if (skb->dst == NULL)
+	if (skb_dst(skb) == NULL)
 		ip6_route_input(skb);
 
 	return dst_input(skb);
@@ -70,7 +70,7 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 
 	idev = __in6_dev_get(skb->dev);
 
-	IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INRECEIVES);
+	IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_IN, skb->len);
 
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
 	    !idev || unlikely(idev->cnf.disable_ipv6)) {
@@ -91,7 +91,7 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 	 * arrived via the sending interface (ethX), because of the
 	 * nature of scoping architecture. --yoshfuji
 	 */
-	IP6CB(skb)->iif = skb->dst ? ip6_dst_idev(skb->dst)->dev->ifindex : dev->ifindex;
+	IP6CB(skb)->iif = skb_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;
 
 	if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
 		goto err;
@@ -161,7 +161,7 @@ static int ip6_input_finish(struct sk_buff *skb)
 	int nexthdr, raw;
 	u8 hash;
 	struct inet6_dev *idev;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	/*
 	 *	Parse extension headers
@@ -169,7 +169,7 @@ static int ip6_input_finish(struct sk_buff *skb)
 
 	rcu_read_lock();
 resubmit:
-	idev = ip6_dst_idev(skb->dst);
+	idev = ip6_dst_idev(skb_dst(skb));
 	if (!pskb_pull(skb, skb_transport_offset(skb)))
 		goto discard;
 	nhoff = IP6CB(skb)->nhoff;
@@ -242,8 +242,9 @@ int ip6_mc_input(struct sk_buff *skb)
 	struct ipv6hdr *hdr;
 	int deliver;
 
-	IP6_INC_STATS_BH(dev_net(skb->dst->dev),
-			 ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
+	IP6_UPD_PO_STATS_BH(dev_net(skb_dst(skb)->dev),
+			 ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INMCAST,
+			 skb->len);
 
 	hdr = ipv6_hdr(skb);
 	deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 9fb49c3b518..7c76e3d1821 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -78,7 +78,7 @@ int __ip6_local_out(struct sk_buff *skb)
 		len = 0;
 	ipv6_hdr(skb)->payload_len = htons(len);
 
-	return nf_hook(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb->dst->dev,
+	return nf_hook(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb_dst(skb)->dev,
 		       dst_output);
 }
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL_GPL(ip6_local_out);
 
 static int ip6_output_finish(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 
 	if (dst->hh)
 		return neigh_hh_output(dst->hh, skb);
@@ -117,7 +117,7 @@ static int ip6_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	WARN_ON(!newskb->dst);
+	WARN_ON(!skb_dst(newskb));
 
 	netif_rx(newskb);
 	return 0;
@@ -126,7 +126,7 @@ static int ip6_dev_loopback_xmit(struct sk_buff *newskb)
 
 static int ip6_output2(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct net_device *dev = dst->dev;
 
 	skb->protocol = htons(ETH_P_IPV6);
@@ -134,7 +134,7 @@ static int ip6_output2(struct sk_buff *skb)
 
 	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
 		struct ipv6_pinfo* np = skb->sk ? inet6_sk(skb->sk) : NULL;
-		struct inet6_dev *idev = ip6_dst_idev(skb->dst);
+		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
 
 		if (!(dev->flags & IFF_LOOPBACK) && (!np || np->mc_loop) &&
 		    ((mroute6_socket(dev_net(dev)) &&
@@ -159,7 +159,8 @@ static int ip6_output2(struct sk_buff *skb)
 			}
 		}
 
-		IP6_INC_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCASTPKTS);
+		IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST,
+				skb->len);
 	}
 
 	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb->dev,
@@ -171,21 +172,21 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
 	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
 
 	return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
-	       skb->dst->dev->mtu : dst_mtu(skb->dst);
+	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
 }
 
 int ip6_output(struct sk_buff *skb)
 {
-	struct inet6_dev *idev = ip6_dst_idev(skb->dst);
+	struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
 	if (unlikely(idev->cnf.disable_ipv6)) {
-		IP6_INC_STATS(dev_net(skb->dst->dev), idev,
+		IP6_INC_STATS(dev_net(skb_dst(skb)->dev), idev,
 			      IPSTATS_MIB_OUTDISCARDS);
 		kfree_skb(skb);
 		return 0;
 	}
 
 	if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
-				dst_allfrag(skb->dst))
+				dst_allfrag(skb_dst(skb)))
 		return ip6_fragment(skb, ip6_output2);
 	else
 		return ip6_output2(skb);
@@ -201,7 +202,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 	struct net *net = sock_net(sk);
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct in6_addr *first_hop = &fl->fl6_dst;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *hdr;
 	u8  proto = fl->proto;
 	int seg_len = skb->len;
@@ -221,7 +222,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 		if (skb_headroom(skb) < head_room) {
 			struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room);
 			if (skb2 == NULL) {
-				IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+				IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 					      IPSTATS_MIB_OUTDISCARDS);
 				kfree_skb(skb);
 				return -ENOBUFS;
@@ -275,8 +276,8 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 
 	mtu = dst_mtu(dst);
 	if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) {
-		IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
-			      IPSTATS_MIB_OUTREQUESTS);
+		IP6_UPD_PO_STATS(net, ip6_dst_idev(skb_dst(skb)),
+			      IPSTATS_MIB_OUT, skb->len);
 		return NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
 				dst_output);
 	}
@@ -285,7 +286,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 		printk(KERN_DEBUG "IPv6: sending pkt_too_big to self\n");
 	skb->dev = dst->dev;
 	icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_FRAGFAILS);
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_FRAGFAILS);
 	kfree_skb(skb);
 	return -EMSGSIZE;
 }
@@ -415,7 +416,7 @@ static inline int ip6_forward_finish(struct sk_buff *skb)
 
 int ip6_forward(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct inet6_skb_parm *opt = IP6CB(skb);
 	struct net *net = dev_net(dst->dev);
@@ -484,7 +485,7 @@ int ip6_forward(struct sk_buff *skb)
 		IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_INDISCARDS);
 		goto drop;
 	}
-	dst = skb->dst;
+	dst = skb_dst(skb);
 
 	/* IPv6 specs say nothing about it, but it is clear that we cannot
 	   send redirects to source routed frames.
@@ -565,8 +566,8 @@ static void ip6_copy_metadata(struct sk_buff *to, struct sk_buff *from)
 	to->pkt_type = from->pkt_type;
 	to->priority = from->priority;
 	to->protocol = from->protocol;
-	dst_release(to->dst);
-	to->dst = dst_clone(from->dst);
+	skb_dst_drop(to);
+	skb_dst_set(to, dst_clone(skb_dst(from)));
 	to->dev = from->dev;
 	to->mark = from->mark;
 
@@ -623,7 +624,7 @@ int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
 static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 {
 	struct sk_buff *frag;
-	struct rt6_info *rt = (struct rt6_info*)skb->dst;
+	struct rt6_info *rt = (struct rt6_info*)skb_dst(skb);
 	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
 	struct ipv6hdr *tmp_hdr;
 	struct frag_hdr *fh;
@@ -631,7 +632,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	__be32 frag_id = 0;
 	int ptr, offset = 0, err=0;
 	u8 *prevhdr, nexthdr = 0;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	hlen = ip6_find_1stfragopt(skb, &prevhdr);
 	nexthdr = *prevhdr;
@@ -643,9 +644,9 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	 * check should be redundant, but it's free.)
 	 */
 	if (!skb->local_df) {
-		skb->dev = skb->dst->dev;
+		skb->dev = skb_dst(skb)->dev;
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
-		IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 			      IPSTATS_MIB_FRAGFAILS);
 		kfree_skb(skb);
 		return -EMSGSIZE;
@@ -657,7 +658,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	}
 	mtu -= hlen + sizeof(struct frag_hdr);
 
-	if (skb_shinfo(skb)->frag_list) {
+	if (skb_has_frags(skb)) {
 		int first_len = skb_pagelen(skb);
 		int truesizes = 0;
 
@@ -666,7 +667,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		    skb_cloned(skb))
 			goto slow_path;
 
-		for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+		skb_walk_frags(skb, frag) {
 			/* Correct geometry. */
 			if (frag->len > mtu ||
 			    ((frag->len & 7) && frag->next) ||
@@ -679,7 +680,6 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 
 			BUG_ON(frag->sk);
 			if (skb->sk) {
-				sock_hold(skb->sk);
 				frag->sk = skb->sk;
 				frag->destructor = sock_wfree;
 				truesizes += frag->truesize;
@@ -689,13 +689,13 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		err = 0;
 		offset = 0;
 		frag = skb_shinfo(skb)->frag_list;
-		skb_shinfo(skb)->frag_list = NULL;
+		skb_frag_list_init(skb);
 		/* BUILD HEADER */
 
 		*prevhdr = NEXTHDR_FRAGMENT;
 		tmp_hdr = kmemdup(skb_network_header(skb), hlen, GFP_ATOMIC);
 		if (!tmp_hdr) {
-			IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 				      IPSTATS_MIB_FRAGFAILS);
 			return -ENOMEM;
 		}
@@ -808,7 +808,7 @@ slow_path:
 
 		if ((frag = alloc_skb(len+hlen+sizeof(struct frag_hdr)+LL_ALLOCATED_SPACE(rt->u.dst.dev), GFP_ATOMIC)) == NULL) {
 			NETDEBUG(KERN_INFO "IPv6: frag: no memory for new fragment!\n");
-			IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 				      IPSTATS_MIB_FRAGFAILS);
 			err = -ENOMEM;
 			goto fail;
@@ -872,16 +872,16 @@ slow_path:
 		if (err)
 			goto fail;
 
-		IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 			      IPSTATS_MIB_FRAGCREATES);
 	}
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 		      IPSTATS_MIB_FRAGOKS);
 	kfree_skb(skb);
 	return err;
 
 fail:
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 		      IPSTATS_MIB_FRAGFAILS);
 	kfree_skb(skb);
 	return err;
@@ -1515,10 +1515,10 @@ int ip6_push_pending_frames(struct sock *sk)
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
 
-	skb->dst = dst_clone(&rt->u.dst);
-	IP6_INC_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUTREQUESTS);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
+	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
 	if (proto == IPPROTO_ICMPV6) {
-		struct inet6_dev *idev = ip6_dst_idev(skb->dst);
+		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
 
 		ICMP6MSGOUT_INC_STATS_BH(net, idev, icmp6_hdr(skb)->icmp6_type);
 		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
@@ -1544,8 +1544,8 @@ void ip6_flush_pending_frames(struct sock *sk)
 	struct sk_buff *skb;
 
 	while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) {
-		if (skb->dst)
-			IP6_INC_STATS(sock_net(sk), ip6_dst_idev(skb->dst),
+		if (skb_dst(skb))
+			IP6_INC_STATS(sock_net(sk), ip6_dst_idev(skb_dst(skb)),
 				      IPSTATS_MIB_OUTDISCARDS);
 		kfree_skb(skb);
 	}
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index d994c55a5b1..404d16a97d5 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -532,8 +532,8 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	if (!skb2)
 		return 0;
 
-	dst_release(skb2->dst);
-	skb2->dst = NULL;
+	skb_dst_drop(skb2);
+
 	skb_pull(skb2, offset);
 	skb_reset_network_header(skb2);
 	eiph = ip_hdr(skb2);
@@ -560,21 +560,21 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 			ip_rt_put(rt);
 			goto out;
 		}
-		skb2->dst = (struct dst_entry *)rt;
+		skb_dst_set(skb2, (struct dst_entry *)rt);
 	} else {
 		ip_rt_put(rt);
 		if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos,
 				   skb2->dev) ||
-		    skb2->dst->dev->type != ARPHRD_TUNNEL)
+		    skb_dst(skb2)->dev->type != ARPHRD_TUNNEL)
 			goto out;
 	}
 
 	/* change mtu on this route */
 	if (rel_type == ICMP_DEST_UNREACH && rel_code == ICMP_FRAG_NEEDED) {
-		if (rel_info > dst_mtu(skb2->dst))
+		if (rel_info > dst_mtu(skb_dst(skb2)))
 			goto out;
 
-		skb2->dst->ops->update_pmtu(skb2->dst, rel_info);
+		skb_dst(skb2)->ops->update_pmtu(skb_dst(skb2), rel_info);
 	}
 
 	icmp_send(skb2, rel_type, rel_code, htonl(rel_info));
@@ -606,8 +606,7 @@ ip6ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		if (!skb2)
 			return 0;
 
-		dst_release(skb2->dst);
-		skb2->dst = NULL;
+		skb_dst_drop(skb2);
 		skb_pull(skb2, offset);
 		skb_reset_network_header(skb2);
 
@@ -720,8 +719,7 @@ static int ip6_tnl_rcv(struct sk_buff *skb, __u16 protocol,
 		skb->pkt_type = PACKET_HOST;
 		memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
 		skb->dev = t->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 
 		dscp_ecn_decapsulate(t, ipv6h, skb);
@@ -885,8 +883,8 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
 	}
 	if (mtu < IPV6_MIN_MTU)
 		mtu = IPV6_MIN_MTU;
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 	if (skb->len > mtu) {
 		*pmtu = mtu;
 		err = -EMSGSIZE;
@@ -910,8 +908,8 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
 		kfree_skb(skb);
 		skb = new_skb;
 	}
-	dst_release(skb->dst);
-	skb->dst = dst_clone(dst);
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst_clone(dst));
 
 	skb->transport_header = skb->network_header;
 
@@ -1100,8 +1098,8 @@ static void ip6_tnl_link_config(struct ip6_tnl *t)
 	struct ip6_tnl_parm *p = &t->parms;
 	struct flowi *fl = &t->fl;
 
-	memcpy(&dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
-	memcpy(&dev->broadcast, &p->raddr, sizeof(struct in6_addr));
+	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
+	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
 
 	/* Set up flowi template */
 	ipv6_addr_copy(&fl->fl6_src, &p->laddr);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 228be551e9c..c769f155c69 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -398,10 +398,9 @@ static int pim6_rcv(struct sk_buff *skb)
 	skb->protocol = htons(ETH_P_IPV6);
 	skb->ip_summed = 0;
 	skb->pkt_type = PACKET_HOST;
-	dst_release(skb->dst);
+	skb_dst_drop(skb);
 	reg_dev->stats.rx_bytes += skb->len;
 	reg_dev->stats.rx_packets++;
-	skb->dst = NULL;
 	nf_reset(skb);
 	netif_rx(skb);
 	dev_put(reg_dev);
@@ -442,6 +441,7 @@ static void reg_vif_setup(struct net_device *dev)
 	dev->flags		= IFF_NOARP;
 	dev->netdev_ops		= &reg_vif_netdev_ops;
 	dev->destructor		= free_netdev;
+	dev->features		|= NETIF_F_NETNS_LOCAL;
 }
 
 static struct net_device *ip6mr_reg_vif(struct net *net)
@@ -849,7 +849,7 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt, mifi_t mifi,
 	ipv6_addr_copy(&msg->im6_src, &ipv6_hdr(pkt)->saddr);
 	ipv6_addr_copy(&msg->im6_dst, &ipv6_hdr(pkt)->daddr);
 
-	skb->dst = dst_clone(pkt->dst);
+	skb_dst_set(skb, dst_clone(skb_dst(pkt)));
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	}
 
@@ -1078,7 +1078,18 @@ int __init ip6_mr_init(void)
 	err = register_netdevice_notifier(&ip6_mr_notifier);
 	if (err)
 		goto reg_notif_fail;
+#ifdef CONFIG_IPV6_PIMSM_V2
+	if (inet6_add_protocol(&pim6_protocol, IPPROTO_PIM) < 0) {
+		printk(KERN_ERR "ip6_mr_init: can't add PIM protocol\n");
+		err = -EAGAIN;
+		goto add_proto_fail;
+	}
+#endif
 	return 0;
+#ifdef CONFIG_IPV6_PIMSM_V2
+add_proto_fail:
+	unregister_netdevice_notifier(&ip6_mr_notifier);
+#endif
 reg_notif_fail:
 	del_timer(&ipmr_expire_timer);
 	unregister_pernet_subsys(&ip6mr_net_ops);
@@ -1364,14 +1375,6 @@ int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int
 		if (v != net->ipv6.mroute_do_pim) {
 			net->ipv6.mroute_do_pim = v;
 			net->ipv6.mroute_do_assert = v;
-			if (net->ipv6.mroute_do_pim)
-				ret = inet6_add_protocol(&pim6_protocol,
-							 IPPROTO_PIM);
-			else
-				ret = inet6_del_protocol(&pim6_protocol,
-							 IPPROTO_PIM);
-			if (ret < 0)
-				ret = -EAGAIN;
 		}
 		rtnl_unlock();
 		return ret;
@@ -1487,7 +1490,7 @@ int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg)
 
 static inline int ip6mr_forward2_finish(struct sk_buff *skb)
 {
-	IP6_INC_STATS_BH(dev_net(skb->dst->dev), ip6_dst_idev(skb->dst),
+	IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
 			 IPSTATS_MIB_OUTFORWDATAGRAMS);
 	return dst_output(skb);
 }
@@ -1532,8 +1535,8 @@ static int ip6mr_forward2(struct sk_buff *skb, struct mfc6_cache *c, int vifi)
 	if (!dst)
 		goto out_free;
 
-	dst_release(skb->dst);
-	skb->dst = dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst);
 
 	/*
 	 * RFC1584 teaches, that DVMRP/PIM router must deliver packets locally
@@ -1722,7 +1725,7 @@ int ip6mr_get_route(struct net *net,
 {
 	int err;
 	struct mfc6_cache *cache;
-	struct rt6_info *rt = (struct rt6_info *)skb->dst;
+	struct rt6_info *rt = (struct rt6_info *)skb_dst(skb);
 
 	read_lock(&mrt_lock);
 	cache = ip6mr_cache_find(net, &rt->rt6i_src.addr, &rt->rt6i_dst.addr);
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index a51fb33e686..4b264ed40a8 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1448,8 +1448,10 @@ static void mld_sendpack(struct sk_buff *skb)
 	struct net *net = dev_net(skb->dev);
 	int err;
 	struct flowi fl;
+	struct dst_entry *dst;
+
+	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
 
-	IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTREQUESTS);
 	payload_len = (skb->tail - skb->network_header) - sizeof(*pip6);
 	mldlen = skb->tail - skb->transport_header;
 	pip6->payload_len = htons(payload_len);
@@ -1458,9 +1460,9 @@ static void mld_sendpack(struct sk_buff *skb)
 		IPPROTO_ICMPV6, csum_partial(skb_transport_header(skb),
 					     mldlen, 0));
 
-	skb->dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
+	dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
 
-	if (!skb->dst) {
+	if (!dst) {
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -1469,17 +1471,20 @@ static void mld_sendpack(struct sk_buff *skb)
 			 &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
 			 skb->dev->ifindex);
 
-	err = xfrm_lookup(net, &skb->dst, &fl, NULL, 0);
+	err = xfrm_lookup(net, &dst, &fl, NULL, 0);
+	skb_dst_set(skb, dst);
 	if (err)
 		goto err_out;
 
+	payload_len = skb->len;
+
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb->dev,
 		      dst_output);
 out:
 	if (!err) {
 		ICMP6MSGOUT_INC_STATS_BH(net, idev, ICMPV6_MLD2_REPORT);
 		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
-		IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_OUTMCASTPKTS);
+		IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
 	} else
 		IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_OUTDISCARDS);
 
@@ -1772,11 +1777,8 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 		     IPV6_TLV_ROUTERALERT, 2, 0, 0,
 		     IPV6_TLV_PADN, 0 };
 	struct flowi fl;
+	struct dst_entry *dst;
 
-	rcu_read_lock();
-	IP6_INC_STATS(net, __in6_dev_get(dev),
-		      IPSTATS_MIB_OUTREQUESTS);
-	rcu_read_unlock();
 	if (type == ICMPV6_MGM_REDUCTION)
 		snd_addr = &in6addr_linklocal_allrouters;
 	else
@@ -1786,6 +1788,11 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 	payload_len = len + sizeof(ra);
 	full_len = sizeof(struct ipv6hdr) + payload_len;
 
+	rcu_read_lock();
+	IP6_UPD_PO_STATS(net, __in6_dev_get(dev),
+		      IPSTATS_MIB_OUT, full_len);
+	rcu_read_unlock();
+
 	skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + full_len, 1, &err);
 
 	if (skb == NULL) {
@@ -1824,8 +1831,8 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 
 	idev = in6_dev_get(skb->dev);
 
-	skb->dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
-	if (!skb->dst) {
+	dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
+	if (!dst) {
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -1834,17 +1841,18 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 			 &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
 			 skb->dev->ifindex);
 
-	err = xfrm_lookup(net, &skb->dst, &fl, NULL, 0);
+	err = xfrm_lookup(net, &dst, &fl, NULL, 0);
 	if (err)
 		goto err_out;
 
+	skb_dst_set(skb, dst);
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb->dev,
 		      dst_output);
 out:
 	if (!err) {
 		ICMP6MSGOUT_INC_STATS(net, idev, type);
 		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
-		IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTMCASTPKTS);
+		IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, full_len);
 	} else
 		IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
 
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 9f061d1adbc..9eb68e92cc1 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -465,8 +465,8 @@ struct sk_buff *ndisc_build_skb(struct net_device *dev,
 				  1, &err);
 	if (!skb) {
 		ND_PRINTK0(KERN_ERR
-			   "ICMPv6 ND: %s() failed to allocate an skb.\n",
-			   __func__);
+			   "ICMPv6 ND: %s() failed to allocate an skb, err=%d.\n",
+			   __func__, err);
 		return NULL;
 	}
 
@@ -530,10 +530,10 @@ void ndisc_send_skb(struct sk_buff *skb,
 		return;
 	}
 
-	skb->dst = dst;
+	skb_dst_set(skb, dst);
 
 	idev = in6_dev_get(dst->dev);
-	IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTREQUESTS);
+	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
 
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
 		      dst_output);
@@ -658,6 +658,7 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr,
 		     &icmp6h, NULL,
 		     send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0);
 }
+EXPORT_SYMBOL(ndisc_send_rs);
 
 
 static void ndisc_error_report(struct neighbour *neigh, struct sk_buff *skb)
@@ -1561,8 +1562,8 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
 				   1, &err);
 	if (buff == NULL) {
 		ND_PRINTK0(KERN_ERR
-			   "ICMPv6 Redirect: %s() failed to allocate an skb.\n",
-			   __func__);
+			   "ICMPv6 Redirect: %s() failed to allocate an skb, err=%d.\n",
+			   __func__, err);
 		goto release;
 	}
 
@@ -1611,9 +1612,9 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
 					     len, IPPROTO_ICMPV6,
 					     csum_partial(icmph, len, 0));
 
-	buff->dst = dst;
+	skb_dst_set(buff, dst);
 	idev = in6_dev_get(dst->dev);
-	IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTREQUESTS);
+	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, buff, NULL, dst->dev,
 		      dst_output);
 	if (!err) {
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 834cea69fb5..d5ed92b1434 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -12,7 +12,7 @@
 
 int ip6_route_me_harder(struct sk_buff *skb)
 {
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct dst_entry *dst;
 	struct flowi fl = {
@@ -28,9 +28,15 @@ int ip6_route_me_harder(struct sk_buff *skb)
 
 #ifdef CONFIG_XFRM
 	if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
-	    xfrm_decode_session(skb, &fl, AF_INET6) == 0)
-		if (xfrm_lookup(net, &skb->dst, &fl, skb->sk, 0))
+	    xfrm_decode_session(skb, &fl, AF_INET6) == 0) {
+		struct dst_entry *dst2 = skb_dst(skb);
+
+		if (xfrm_lookup(net, &dst2, &fl, skb->sk, 0)) {
+			skb_dst_set(skb, NULL);
 			return -1;
+		}
+		skb_dst_set(skb, dst2);
+	}
 #endif
 
 	if (dst->error) {
@@ -41,9 +47,9 @@ int ip6_route_me_harder(struct sk_buff *skb)
 	}
 
 	/* Drop old route. */
-	dst_release(skb->dst);
+	skb_dst_drop(skb);
 
-	skb->dst = dst;
+	skb_dst_set(skb, dst);
 	return 0;
 }
 EXPORT_SYMBOL(ip6_route_me_harder);
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index b693f841aeb..1cf3f0c6a95 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -598,7 +598,7 @@ static int __init ip6_queue_init(void)
 #ifdef CONFIG_SYSCTL
 	ipq_sysctl_header = register_sysctl_paths(net_ipv6_ctl_path, ipq_table);
 #endif
-	status = nf_register_queue_handler(PF_INET6, &nfqh);
+	status = nf_register_queue_handler(NFPROTO_IPV6, &nfqh);
 	if (status < 0) {
 		printk(KERN_ERR "ip6_queue: failed to register queue handler\n");
 		goto cleanup_sysctl;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 219e165aea1..ced1f2c0cb6 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -270,8 +270,8 @@ static struct nf_loginfo trace_loginfo = {
 /* Mildly perf critical (only if packet tracing is on) */
 static inline int
 get_chainname_rulenum(struct ip6t_entry *s, struct ip6t_entry *e,
-		      char *hookname, char **chainname,
-		      char **comment, unsigned int *rulenum)
+		      const char *hookname, const char **chainname,
+		      const char **comment, unsigned int *rulenum)
 {
 	struct ip6t_standard_target *t = (void *)ip6t_get_target(s);
 
@@ -289,8 +289,8 @@ get_chainname_rulenum(struct ip6t_entry *s, struct ip6t_entry *e,
 		   && unconditional(&s->ipv6)) {
 			/* Tail of chains: STANDARD target (return/policy) */
 			*comment = *chainname == hookname
-				? (char *)comments[NF_IP6_TRACE_COMMENT_POLICY]
-				: (char *)comments[NF_IP6_TRACE_COMMENT_RETURN];
+				? comments[NF_IP6_TRACE_COMMENT_POLICY]
+				: comments[NF_IP6_TRACE_COMMENT_RETURN];
 		}
 		return 1;
 	} else
@@ -309,14 +309,14 @@ static void trace_packet(struct sk_buff *skb,
 {
 	void *table_base;
 	const struct ip6t_entry *root;
-	char *hookname, *chainname, *comment;
+	const char *hookname, *chainname, *comment;
 	unsigned int rulenum = 0;
 
-	table_base = (void *)private->entries[smp_processor_id()];
+	table_base = private->entries[smp_processor_id()];
 	root = get_entry(table_base, private->hook_entry[hook]);
 
-	hookname = chainname = (char *)hooknames[hook];
-	comment = (char *)comments[NF_IP6_TRACE_COMMENT_RULE];
+	hookname = chainname = hooknames[hook];
+	comment = comments[NF_IP6_TRACE_COMMENT_RULE];
 
 	IP6T_ENTRY_ITERATE(root,
 			   private->size - private->hook_entry[hook],
@@ -329,6 +329,12 @@ static void trace_packet(struct sk_buff *skb,
 }
 #endif
 
+static inline __pure struct ip6t_entry *
+ip6t_next_entry(const struct ip6t_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 /* Returns one of the generic firewall policies, like NF_ACCEPT. */
 unsigned int
 ip6t_do_table(struct sk_buff *skb,
@@ -337,6 +343,8 @@ ip6t_do_table(struct sk_buff *skb,
 	      const struct net_device *out,
 	      struct xt_table *table)
 {
+#define tb_comefrom ((struct ip6t_entry *)table_base)->comefrom
+
 	static const char nulldevname[IFNAMSIZ] __attribute__((aligned(sizeof(long))));
 	bool hotdrop = false;
 	/* Initializing verdict to NF_DROP keeps gcc happy. */
@@ -361,7 +369,7 @@ ip6t_do_table(struct sk_buff *skb,
 	mtpar.in      = tgpar.in  = in;
 	mtpar.out     = tgpar.out = out;
 	mtpar.family  = tgpar.family = NFPROTO_IPV6;
-	tgpar.hooknum = hook;
+	mtpar.hooknum = tgpar.hooknum = hook;
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
 
@@ -375,96 +383,86 @@ ip6t_do_table(struct sk_buff *skb,
 	back = get_entry(table_base, private->underflow[hook]);
 
 	do {
+		struct ip6t_entry_target *t;
+
 		IP_NF_ASSERT(e);
 		IP_NF_ASSERT(back);
-		if (ip6_packet_match(skb, indev, outdev, &e->ipv6,
-			&mtpar.thoff, &mtpar.fragoff, &hotdrop)) {
-			struct ip6t_entry_target *t;
-
-			if (IP6T_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0)
-				goto no_match;
+		if (!ip6_packet_match(skb, indev, outdev, &e->ipv6,
+		    &mtpar.thoff, &mtpar.fragoff, &hotdrop) ||
+		    IP6T_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0) {
+			e = ip6t_next_entry(e);
+			continue;
+		}
 
-			ADD_COUNTER(e->counters,
-				    ntohs(ipv6_hdr(skb)->payload_len) +
-				    sizeof(struct ipv6hdr), 1);
+		ADD_COUNTER(e->counters,
+			    ntohs(ipv6_hdr(skb)->payload_len) +
+			    sizeof(struct ipv6hdr), 1);
 
-			t = ip6t_get_target(e);
-			IP_NF_ASSERT(t->u.kernel.target);
+		t = ip6t_get_target(e);
+		IP_NF_ASSERT(t->u.kernel.target);
 
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
-			/* The packet is traced: log it */
-			if (unlikely(skb->nf_trace))
-				trace_packet(skb, hook, in, out,
-					     table->name, private, e);
+		/* The packet is traced: log it */
+		if (unlikely(skb->nf_trace))
+			trace_packet(skb, hook, in, out,
+				     table->name, private, e);
 #endif
-			/* Standard target? */
-			if (!t->u.kernel.target->target) {
-				int v;
-
-				v = ((struct ip6t_standard_target *)t)->verdict;
-				if (v < 0) {
-					/* Pop from stack? */
-					if (v != IP6T_RETURN) {
-						verdict = (unsigned)(-v) - 1;
-						break;
-					}
-					e = back;
-					back = get_entry(table_base,
-							 back->comefrom);
-					continue;
-				}
-				if (table_base + v != (void *)e + e->next_offset
-				    && !(e->ipv6.flags & IP6T_F_GOTO)) {
-					/* Save old back ptr in next entry */
-					struct ip6t_entry *next
-						= (void *)e + e->next_offset;
-					next->comefrom
-						= (void *)back - table_base;
-					/* set back pointer to next entry */
-					back = next;
+		/* Standard target? */
+		if (!t->u.kernel.target->target) {
+			int v;
+
+			v = ((struct ip6t_standard_target *)t)->verdict;
+			if (v < 0) {
+				/* Pop from stack? */
+				if (v != IP6T_RETURN) {
+					verdict = (unsigned)(-v) - 1;
+					break;
 				}
+				e = back;
+				back = get_entry(table_base, back->comefrom);
+				continue;
+			}
+			if (table_base + v != ip6t_next_entry(e)
+			    && !(e->ipv6.flags & IP6T_F_GOTO)) {
+				/* Save old back ptr in next entry */
+				struct ip6t_entry *next = ip6t_next_entry(e);
+				next->comefrom = (void *)back - table_base;
+				/* set back pointer to next entry */
+				back = next;
+			}
 
-				e = get_entry(table_base, v);
-			} else {
-				/* Targets which reenter must return
-				   abs. verdicts */
-				tgpar.target   = t->u.kernel.target;
-				tgpar.targinfo = t->data;
+			e = get_entry(table_base, v);
+			continue;
+		}
 
-#ifdef CONFIG_NETFILTER_DEBUG
-				((struct ip6t_entry *)table_base)->comefrom
-					= 0xeeeeeeec;
-#endif
-				verdict = t->u.kernel.target->target(skb,
-								     &tgpar);
+		/* Targets which reenter must return
+		   abs. verdicts */
+		tgpar.target   = t->u.kernel.target;
+		tgpar.targinfo = t->data;
 
 #ifdef CONFIG_NETFILTER_DEBUG
-				if (((struct ip6t_entry *)table_base)->comefrom
-				    != 0xeeeeeeec
-				    && verdict == IP6T_CONTINUE) {
-					printk("Target %s reentered!\n",
-					       t->u.kernel.target->name);
-					verdict = NF_DROP;
-				}
-				((struct ip6t_entry *)table_base)->comefrom
-					= 0x57acc001;
+		tb_comefrom = 0xeeeeeeec;
 #endif
-				if (verdict == IP6T_CONTINUE)
-					e = (void *)e + e->next_offset;
-				else
-					/* Verdict */
-					break;
-			}
-		} else {
+		verdict = t->u.kernel.target->target(skb, &tgpar);
 
-		no_match:
-			e = (void *)e + e->next_offset;
+#ifdef CONFIG_NETFILTER_DEBUG
+		if (tb_comefrom != 0xeeeeeeec && verdict == IP6T_CONTINUE) {
+			printk("Target %s reentered!\n",
+			       t->u.kernel.target->name);
+			verdict = NF_DROP;
 		}
+		tb_comefrom = 0x57acc001;
+#endif
+		if (verdict == IP6T_CONTINUE)
+			e = ip6t_next_entry(e);
+		else
+			/* Verdict */
+			break;
 	} while (!hotdrop);
 
 #ifdef CONFIG_NETFILTER_DEBUG
-	((struct ip6t_entry *)table_base)->comefrom = NETFILTER_LINK_POISON;
+	tb_comefrom = NETFILTER_LINK_POISON;
 #endif
 	xt_info_rdunlock_bh();
 
@@ -475,6 +473,8 @@ ip6t_do_table(struct sk_buff *skb,
 		return NF_DROP;
 	else return verdict;
 #endif
+
+#undef tb_comefrom
 }
 
 /* Figures out from what hook each rule can be called: returns 0 if
@@ -2191,7 +2191,7 @@ static bool icmp6_checkentry(const struct xt_mtchk_param *par)
 static struct xt_target ip6t_standard_target __read_mostly = {
 	.name		= IP6T_STANDARD_TARGET,
 	.targetsize	= sizeof(int),
-	.family		= AF_INET6,
+	.family		= NFPROTO_IPV6,
 #ifdef CONFIG_COMPAT
 	.compatsize	= sizeof(compat_int_t),
 	.compat_from_user = compat_standard_from_user,
@@ -2203,7 +2203,7 @@ static struct xt_target ip6t_error_target __read_mostly = {
 	.name		= IP6T_ERROR_TARGET,
 	.target		= ip6t_error,
 	.targetsize	= IP6T_FUNCTION_MAXNAMELEN,
-	.family		= AF_INET6,
+	.family		= NFPROTO_IPV6,
 };
 
 static struct nf_sockopt_ops ip6t_sockopts = {
@@ -2229,17 +2229,17 @@ static struct xt_match icmp6_matchstruct __read_mostly = {
 	.matchsize	= sizeof(struct ip6t_icmp),
 	.checkentry	= icmp6_checkentry,
 	.proto		= IPPROTO_ICMPV6,
-	.family		= AF_INET6,
+	.family		= NFPROTO_IPV6,
 };
 
 static int __net_init ip6_tables_net_init(struct net *net)
 {
-	return xt_proto_init(net, AF_INET6);
+	return xt_proto_init(net, NFPROTO_IPV6);
 }
 
 static void __net_exit ip6_tables_net_exit(struct net *net)
 {
-	xt_proto_fini(net, AF_INET6);
+	xt_proto_fini(net, NFPROTO_IPV6);
 }
 
 static struct pernet_operations ip6_tables_net_ops = {
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 5a2d0a41694..5a7f00cd15c 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -112,7 +112,7 @@ static void send_reset(struct net *net, struct sk_buff *oldskb)
 		return;
 	}
 
-	nskb->dst = dst;
+	skb_dst_set(nskb, dst);
 
 	skb_reserve(nskb, hh_len + dst->header_len);
 
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index 9903227bf37..642dcb127ba 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -95,18 +95,10 @@ static int icmpv6_packet(struct nf_conn *ct,
 		       u_int8_t pf,
 		       unsigned int hooknum)
 {
-	/* Try to delete connection immediately after all replies:
-	   won't actually vanish as we still have skb, and del_timer
-	   means this will only run once even if count hits zero twice
-	   (theoretically possible with SMP) */
-	if (CTINFO2DIR(ctinfo) == IP_CT_DIR_REPLY) {
-		if (atomic_dec_and_test(&ct->proto.icmp.count))
-			nf_ct_kill_acct(ct, ctinfo, skb);
-	} else {
-		atomic_inc(&ct->proto.icmp.count);
-		nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, ct);
-		nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmpv6_timeout);
-	}
+	/* Do not immediately delete the connection after the first
+	   successful reply to avoid excessive conntrackd traffic
+	   and also to handle correctly ICMP echo reply duplicates. */
+	nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmpv6_timeout);
 
 	return NF_ACCEPT;
 }
@@ -132,7 +124,6 @@ static bool icmpv6_new(struct nf_conn *ct, const struct sk_buff *skb,
 				      type + 128);
 		return false;
 	}
-	atomic_set(&ct->proto.icmp.count, 0);
 	return true;
 }
 
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 058a5e4a60c..f3aba255ad9 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -409,7 +409,7 @@ nf_ct_frag6_reasm(struct nf_ct_frag6_queue *fq, struct net_device *dev)
 	/* If the first fragment is fragmented itself, we split
 	 * it to two chunks: the first with data and paged part
 	 * and the second, holding only fragments. */
-	if (skb_shinfo(head)->frag_list) {
+	if (skb_has_frags(head)) {
 		struct sk_buff *clone;
 		int i, plen = 0;
 
@@ -420,7 +420,7 @@ nf_ct_frag6_reasm(struct nf_ct_frag6_queue *fq, struct net_device *dev)
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
-		skb_shinfo(head)->frag_list = NULL;
+		skb_frag_list_init(head);
 		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
 			plen += skb_shinfo(head)->frags[i].size;
 		clone->len = clone->data_len = head->data_len - plen;
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 97c17fdd6f7..590ddefb7ff 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -61,7 +61,7 @@ static const struct file_operations sockstat6_seq_fops = {
 
 static struct snmp_mib snmp6_ipstats_list[] = {
 /* ipv6 mib according to RFC 2465 */
-	SNMP_MIB_ITEM("Ip6InReceives", IPSTATS_MIB_INRECEIVES),
+	SNMP_MIB_ITEM("Ip6InReceives", IPSTATS_MIB_INPKTS),
 	SNMP_MIB_ITEM("Ip6InHdrErrors", IPSTATS_MIB_INHDRERRORS),
 	SNMP_MIB_ITEM("Ip6InTooBigErrors", IPSTATS_MIB_INTOOBIGERRORS),
 	SNMP_MIB_ITEM("Ip6InNoRoutes", IPSTATS_MIB_INNOROUTES),
@@ -71,7 +71,7 @@ static struct snmp_mib snmp6_ipstats_list[] = {
 	SNMP_MIB_ITEM("Ip6InDiscards", IPSTATS_MIB_INDISCARDS),
 	SNMP_MIB_ITEM("Ip6InDelivers", IPSTATS_MIB_INDELIVERS),
 	SNMP_MIB_ITEM("Ip6OutForwDatagrams", IPSTATS_MIB_OUTFORWDATAGRAMS),
-	SNMP_MIB_ITEM("Ip6OutRequests", IPSTATS_MIB_OUTREQUESTS),
+	SNMP_MIB_ITEM("Ip6OutRequests", IPSTATS_MIB_OUTPKTS),
 	SNMP_MIB_ITEM("Ip6OutDiscards", IPSTATS_MIB_OUTDISCARDS),
 	SNMP_MIB_ITEM("Ip6OutNoRoutes", IPSTATS_MIB_OUTNOROUTES),
 	SNMP_MIB_ITEM("Ip6ReasmTimeout", IPSTATS_MIB_REASMTIMEOUT),
@@ -83,6 +83,12 @@ static struct snmp_mib snmp6_ipstats_list[] = {
 	SNMP_MIB_ITEM("Ip6FragCreates", IPSTATS_MIB_FRAGCREATES),
 	SNMP_MIB_ITEM("Ip6InMcastPkts", IPSTATS_MIB_INMCASTPKTS),
 	SNMP_MIB_ITEM("Ip6OutMcastPkts", IPSTATS_MIB_OUTMCASTPKTS),
+	SNMP_MIB_ITEM("Ip6InOctets", IPSTATS_MIB_INOCTETS),
+	SNMP_MIB_ITEM("Ip6OutOctets", IPSTATS_MIB_OUTOCTETS),
+	SNMP_MIB_ITEM("Ip6InMcastOctets", IPSTATS_MIB_INMCASTOCTETS),
+	SNMP_MIB_ITEM("Ip6OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS),
+	SNMP_MIB_ITEM("Ip6InBcastOctets", IPSTATS_MIB_INBCASTOCTETS),
+	SNMP_MIB_ITEM("Ip6OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 61f6827e590..36a090d87a3 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -625,7 +625,7 @@ static int rawv6_send_hdrinc(struct sock *sk, void *from, int length,
 
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
-	skb->dst = dst_clone(&rt->u.dst);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
 
 	skb_put(skb, length);
 	skb_reset_network_header(skb);
@@ -638,7 +638,7 @@ static int rawv6_send_hdrinc(struct sock *sk, void *from, int length,
 	if (err)
 		goto error_fault;
 
-	IP6_INC_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUTREQUESTS);
+	IP6_UPD_PO_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, rt->u.dst.dev,
 		      dst_output);
 	if (err > 0)
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index e9ac7a12f59..2642a41a853 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -267,7 +267,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 	struct sk_buff *prev, *next;
 	struct net_device *dev;
 	int offset, end;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	if (fq->q.last_in & INET_FRAG_COMPLETE)
 		goto err;
@@ -277,7 +277,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 			((u8 *)(fhdr + 1) - (u8 *)(ipv6_hdr(skb) + 1)));
 
 	if ((unsigned int)end > IPV6_MAXPLEN) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 				  ((u8 *)&fhdr->frag_off -
@@ -310,7 +310,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 			/* RFC2460 says always send parameter problem in
 			 * this case. -DaveM
 			 */
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INHDRERRORS);
 			icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 					  offsetof(struct ipv6hdr, payload_len));
@@ -434,7 +434,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 	return -1;
 
 err:
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 		      IPSTATS_MIB_REASMFAILS);
 	kfree_skb(skb);
 	return -1;
@@ -494,7 +494,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 	/* If the first fragment is fragmented itself, we split
 	 * it to two chunks: the first with data and paged part
 	 * and the second, holding only fragments. */
-	if (skb_shinfo(head)->frag_list) {
+	if (skb_has_frags(head)) {
 		struct sk_buff *clone;
 		int i, plen = 0;
 
@@ -503,7 +503,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
-		skb_shinfo(head)->frag_list = NULL;
+		skb_frag_list_init(head);
 		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
 			plen += skb_shinfo(head)->frags[i].size;
 		clone->len = clone->data_len = head->data_len - plen;
@@ -576,9 +576,9 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 	struct frag_hdr *fhdr;
 	struct frag_queue *fq;
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
-	IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMREQDS);
+	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);
 
 	/* Jumbo payload inhibits frag. header */
 	if (hdr->payload_len==0)
@@ -595,17 +595,17 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 		/* It is not a fragmented frame */
 		skb->transport_header += sizeof(struct frag_hdr);
 		IP6_INC_STATS_BH(net,
-				 ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMOKS);
+				 ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMOKS);
 
 		IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
 		return 1;
 	}
 
 	if (atomic_read(&net->ipv6.frags.mem) > net->ipv6.frags.high_thresh)
-		ip6_evictor(net, ip6_dst_idev(skb->dst));
+		ip6_evictor(net, ip6_dst_idev(skb_dst(skb)));
 
 	if ((fq = fq_find(net, fhdr->identification, &hdr->saddr, &hdr->daddr,
-			  ip6_dst_idev(skb->dst))) != NULL) {
+			  ip6_dst_idev(skb_dst(skb)))) != NULL) {
 		int ret;
 
 		spin_lock(&fq->q.lock);
@@ -617,12 +617,12 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 		return ret;
 	}
 
-	IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMFAILS);
+	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMFAILS);
 	kfree_skb(skb);
 	return -1;
 
 fail_hdr:
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INHDRERRORS);
 	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, skb_network_header_len(skb));
 	return -1;
 }
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 032a5ec391c..658293ea05b 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -800,7 +800,7 @@ void ip6_route_input(struct sk_buff *skb)
 	if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG)
 		flags |= RT6_LOOKUP_F_IFACE;
 
-	skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input);
+	skb_dst_set(skb, fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input));
 }
 
 static struct rt6_info *ip6_pol_route_output(struct net *net, struct fib6_table *table,
@@ -911,7 +911,7 @@ static void ip6_link_failure(struct sk_buff *skb)
 
 	icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0, skb->dev);
 
-	rt = (struct rt6_info *) skb->dst;
+	rt = (struct rt6_info *) skb_dst(skb);
 	if (rt) {
 		if (rt->rt6i_flags&RTF_CACHE) {
 			dst_set_expires(&rt->u.dst, 0);
@@ -1868,7 +1868,7 @@ int ipv6_route_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 static int ip6_pkt_drop(struct sk_buff *skb, int code, int ipstats_mib_noroutes)
 {
 	int type;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	switch (ipstats_mib_noroutes) {
 	case IPSTATS_MIB_INNOROUTES:
 		type = ipv6_addr_type(&ipv6_hdr(skb)->daddr);
@@ -1895,7 +1895,7 @@ static int ip6_pkt_discard(struct sk_buff *skb)
 
 static int ip6_pkt_discard_out(struct sk_buff *skb)
 {
-	skb->dev = skb->dst->dev;
+	skb->dev = skb_dst(skb)->dev;
 	return ip6_pkt_drop(skb, ICMPV6_NOROUTE, IPSTATS_MIB_OUTNOROUTES);
 }
 
@@ -1908,7 +1908,7 @@ static int ip6_pkt_prohibit(struct sk_buff *skb)
 
 static int ip6_pkt_prohibit_out(struct sk_buff *skb)
 {
-	skb->dev = skb->dst->dev;
+	skb->dev = skb_dst(skb)->dev;
 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
 }
 
@@ -2366,7 +2366,7 @@ static int inet6_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	skb_reserve(skb, MAX_HEADER + sizeof(struct ipv6hdr));
 
 	rt = (struct rt6_info*) ip6_route_output(net, NULL, &fl);
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 
 	err = rt6_fill_node(net, skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
 			    RTM_NEWROUTE, NETLINK_CB(in_skb).pid,
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 664ab82e03b..68e52308e55 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -15,6 +15,7 @@
  * Roger Venning <r.venning@telstra.com>:	6to4 support
  * Nate Thompson <nate@thebog.net>:		6to4 support
  * Fred Templin <fred.l.templin@boeing.com>:	isatap support
+ * Sascha Hlusiak <mail@saschahlusiak.de>:	stateless autoconf for isatap
  */
 
 #include <linux/module.h>
@@ -80,7 +81,7 @@ struct sit_net {
 static DEFINE_RWLOCK(ipip6_lock);
 
 static struct ip_tunnel * ipip6_tunnel_lookup(struct net *net,
-		__be32 remote, __be32 local)
+		struct net_device *dev, __be32 remote, __be32 local)
 {
 	unsigned h0 = HASH(remote);
 	unsigned h1 = HASH(local);
@@ -89,18 +90,25 @@ static struct ip_tunnel * ipip6_tunnel_lookup(struct net *net,
 
 	for (t = sitn->tunnels_r_l[h0^h1]; t; t = t->next) {
 		if (local == t->parms.iph.saddr &&
-		    remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
+		    remote == t->parms.iph.daddr &&
+		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (t->dev->flags & IFF_UP))
 			return t;
 	}
 	for (t = sitn->tunnels_r[h0]; t; t = t->next) {
-		if (remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
+		if (remote == t->parms.iph.daddr &&
+		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (t->dev->flags & IFF_UP))
 			return t;
 	}
 	for (t = sitn->tunnels_l[h1]; t; t = t->next) {
-		if (local == t->parms.iph.saddr && (t->dev->flags&IFF_UP))
+		if (local == t->parms.iph.saddr &&
+		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	if ((t = sitn->tunnels_wc[0]) != NULL && (t->dev->flags&IFF_UP))
+	t = sitn->tunnels_wc[0];
+	if ((t != NULL) && (t->dev->flags & IFF_UP))
 		return t;
 	return NULL;
 }
@@ -165,8 +173,14 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct net *net,
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 
 	for (tp = __ipip6_bucket(sitn, parms); (t = *tp) != NULL; tp = &t->next) {
-		if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr)
-			return t;
+		if (local == t->parms.iph.saddr &&
+		    remote == t->parms.iph.daddr &&
+		    parms->link == t->parms.link) {
+			if (create)
+				return NULL;
+			else
+				return t;
+		}
 	}
 	if (!create)
 		goto failed;
@@ -209,6 +223,44 @@ failed:
 	return NULL;
 }
 
+static void ipip6_tunnel_rs_timer(unsigned long data)
+{
+	struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *) data;
+	struct inet6_dev *ifp;
+	struct inet6_ifaddr *addr;
+
+	spin_lock(&p->lock);
+	ifp = __in6_dev_get(p->tunnel->dev);
+
+	read_lock_bh(&ifp->lock);
+	for (addr = ifp->addr_list; addr; addr = addr->if_next) {
+		struct in6_addr rtr;
+
+		if (!(ipv6_addr_type(&addr->addr) & IPV6_ADDR_LINKLOCAL))
+			continue;
+
+		/* Send RS to guessed linklocal address of router
+		 *
+		 * Better: send to ff02::2 encapsuled in unicast directly
+		 * to router-v4 instead of guessing the v6 address.
+		 *
+		 * Cisco/Windows seem to not set the u/l bit correctly,
+		 * so we won't guess right.
+		 */
+		ipv6_addr_set(&rtr,  htonl(0xFE800000), 0, 0, 0);
+		if (!__ipv6_isatap_ifid(rtr.s6_addr + 8,
+					p->addr)) {
+			ndisc_send_rs(p->tunnel->dev, &addr->addr, &rtr);
+		}
+	}
+	read_unlock_bh(&ifp->lock);
+
+	mod_timer(&p->rs_timer, jiffies + HZ * p->rs_delay);
+	spin_unlock(&p->lock);
+
+	return;
+}
+
 static struct ip_tunnel_prl_entry *
 __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr)
 {
@@ -267,6 +319,7 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t,
 			continue;
 		kp[c].addr = prl->addr;
 		kp[c].flags = prl->flags;
+		kp[c].rs_delay = prl->rs_delay;
 		c++;
 		if (kprl.addr != htonl(INADDR_ANY))
 			break;
@@ -316,11 +369,23 @@ ipip6_tunnel_add_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a, int chg)
 	}
 
 	p->next = t->prl;
+	p->tunnel = t;
 	t->prl = p;
 	t->prl_count++;
+
+	spin_lock_init(&p->lock);
+	setup_timer(&p->rs_timer, ipip6_tunnel_rs_timer, (unsigned long) p);
 update:
 	p->addr = a->addr;
 	p->flags = a->flags;
+	p->rs_delay = a->rs_delay;
+	if (p->rs_delay == 0)
+		p->rs_delay = IPTUNNEL_RS_DEFAULT_DELAY;
+	spin_lock(&p->lock);
+	del_timer(&p->rs_timer);
+	if (p->flags & PRL_DEFAULT)
+		mod_timer(&p->rs_timer, jiffies + 1);
+	spin_unlock(&p->lock);
 out:
 	write_unlock(&ipip6_lock);
 	return err;
@@ -339,6 +404,9 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 			if ((*p)->addr == a->addr) {
 				x = *p;
 				*p = x->next;
+				spin_lock(&x->lock);
+				del_timer(&x->rs_timer);
+				spin_unlock(&x->lock);
 				kfree(x);
 				t->prl_count--;
 				goto out;
@@ -349,13 +417,16 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 		while (t->prl) {
 			x = t->prl;
 			t->prl = t->prl->next;
+			spin_lock(&x->lock);
+			del_timer(&x->rs_timer);
+			spin_unlock(&x->lock);
 			kfree(x);
 			t->prl_count--;
 		}
 	}
 out:
 	write_unlock(&ipip6_lock);
-	return 0;
+	return err;
 }
 
 static int
@@ -446,7 +517,10 @@ static int ipip6_err(struct sk_buff *skb, u32 info)
 	err = -ENOENT;
 
 	read_lock(&ipip6_lock);
-	t = ipip6_tunnel_lookup(dev_net(skb->dev), iph->daddr, iph->saddr);
+	t = ipip6_tunnel_lookup(dev_net(skb->dev),
+				skb->dev,
+				iph->daddr,
+				iph->saddr);
 	if (t == NULL || t->parms.iph.daddr == 0)
 		goto out;
 
@@ -481,8 +555,9 @@ static int ipip6_rcv(struct sk_buff *skb)
 	iph = ip_hdr(skb);
 
 	read_lock(&ipip6_lock);
-	if ((tunnel = ipip6_tunnel_lookup(dev_net(skb->dev),
-					iph->saddr, iph->daddr)) != NULL) {
+	tunnel = ipip6_tunnel_lookup(dev_net(skb->dev), skb->dev,
+				     iph->saddr, iph->daddr);
+	if (tunnel != NULL) {
 		secpath_reset(skb);
 		skb->mac_header = skb->network_header;
 		skb_reset_network_header(skb);
@@ -500,8 +575,7 @@ static int ipip6_rcv(struct sk_buff *skb)
 		tunnel->dev->stats.rx_packets++;
 		tunnel->dev->stats.rx_bytes += skb->len;
 		skb->dev = tunnel->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 		ipip6_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
@@ -563,8 +637,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (dev->priv_flags & IFF_ISATAP) {
 		struct neighbour *neigh = NULL;
 
-		if (skb->dst)
-			neigh = skb->dst->neighbour;
+		if (skb_dst(skb))
+			neigh = skb_dst(skb)->neighbour;
 
 		if (neigh == NULL) {
 			if (net_ratelimit())
@@ -588,8 +662,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!dst) {
 		struct neighbour *neigh = NULL;
 
-		if (skb->dst)
-			neigh = skb->dst->neighbour;
+		if (skb_dst(skb))
+			neigh = skb_dst(skb)->neighbour;
 
 		if (neigh == NULL) {
 			if (net_ratelimit())
@@ -639,7 +713,7 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (tiph->frag_off)
 		mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
 	else
-		mtu = skb->dst ? dst_mtu(skb->dst) : dev->mtu;
+		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
 	if (mtu < 68) {
 		stats->collisions++;
@@ -648,8 +722,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 	if (mtu < IPV6_MIN_MTU)
 		mtu = IPV6_MIN_MTU;
-	if (tunnel->parms.iph.daddr && skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (tunnel->parms.iph.daddr && skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	if (skb->len > mtu) {
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, dev);
@@ -693,8 +767,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_reset_network_header(skb);
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 	IPCB(skb)->flags = 0;
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 711175e0571..8c2513982b6 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -131,7 +131,7 @@ __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
 	int mssind;
 	const __u16 mss = *mssp;
 
-	tcp_sk(sk)->last_synq_overflow = jiffies;
+	tcp_synq_overflow(sk);
 
 	for (mssind = 0; mss > msstab[mssind + 1]; mssind++)
 		;
@@ -175,7 +175,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 	if (!sysctl_tcp_syncookies || !th->ack)
 		goto out;
 
-	if (time_after(jiffies, tp->last_synq_overflow + TCP_TIMEOUT_INIT) ||
+	if (tcp_synq_no_recent_overflow(sk) ||
 		(mss = cookie_check(skb, cookie)) == 0) {
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESFAILED);
 		goto out;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 4b5aa185426..53b6a4192b1 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -941,9 +941,10 @@ static int tcp_v6_gso_send_check(struct sk_buff *skb)
 	return 0;
 }
 
-struct sk_buff **tcp6_gro_receive(struct sk_buff **head, struct sk_buff *skb)
+static struct sk_buff **tcp6_gro_receive(struct sk_buff **head,
+					 struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	struct ipv6hdr *iph = skb_gro_network_header(skb);
 
 	switch (skb->ip_summed) {
 	case CHECKSUM_COMPLETE:
@@ -961,9 +962,8 @@ struct sk_buff **tcp6_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 	return tcp_gro_receive(head, skb);
 }
-EXPORT_SYMBOL(tcp6_gro_receive);
 
-int tcp6_gro_complete(struct sk_buff *skb)
+static int tcp6_gro_complete(struct sk_buff *skb)
 {
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct tcphdr *th = tcp_hdr(skb);
@@ -974,7 +974,6 @@ int tcp6_gro_complete(struct sk_buff *skb)
 
 	return tcp_gro_complete(skb);
 }
-EXPORT_SYMBOL(tcp6_gro_complete);
 
 static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
 				 u32 ts, struct tcp_md5sig_key *key, int rst)
@@ -982,9 +981,10 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
 	struct tcphdr *th = tcp_hdr(skb), *t1;
 	struct sk_buff *buff;
 	struct flowi fl;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct sock *ctl_sk = net->ipv6.tcp_sk;
 	unsigned int tot_len = sizeof(struct tcphdr);
+	struct dst_entry *dst;
 	__be32 *topt;
 
 	if (ts)
@@ -1053,8 +1053,9 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
 	 * Underlying function will use this to retrieve the network
 	 * namespace
 	 */
-	if (!ip6_dst_lookup(ctl_sk, &buff->dst, &fl)) {
-		if (xfrm_lookup(net, &buff->dst, &fl, NULL, 0) >= 0) {
+	if (!ip6_dst_lookup(ctl_sk, &dst, &fl)) {
+		if (xfrm_lookup(net, &dst, &fl, NULL, 0) >= 0) {
+			skb_dst_set(buff, dst);
 			ip6_xmit(ctl_sk, buff, &fl, NULL, 0);
 			TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
 			if (rst)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 8905712cfbb..fc333d85472 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -177,10 +177,9 @@ static struct sock *__udp6_lib_lookup_skb(struct sk_buff *skb,
 
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
-	else
-		return __udp6_lib_lookup(dev_net(skb->dst->dev), &iph->saddr, sport,
-					 &iph->daddr, dport, inet6_iif(skb),
-					 udptable);
+	return __udp6_lib_lookup(dev_net(skb_dst(skb)->dev), &iph->saddr, sport,
+				 &iph->daddr, dport, inet6_iif(skb),
+				 udptable);
 }
 
 /*
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index e20529b4c82..3927832227b 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -31,7 +31,7 @@ static inline void ipip6_ecn_decapsulate(struct sk_buff *skb)
  */
 static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *top_iph;
 	int dsfield;
 
@@ -45,7 +45,7 @@ static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 
 	memcpy(top_iph->flow_lbl, XFRM_MODE_SKB_CB(skb)->flow_lbl,
 	       sizeof(top_iph->flow_lbl));
-	top_iph->nexthdr = xfrm_af2proto(skb->dst->ops->family);
+	top_iph->nexthdr = xfrm_af2proto(skb_dst(skb)->ops->family);
 
 	dsfield = XFRM_MODE_SKB_CB(skb)->tos;
 	dsfield = INET_ECN_encapsulate(dsfield, dsfield);
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 5ee5a031bc9..c4f4eef032a 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -30,7 +30,7 @@ EXPORT_SYMBOL(xfrm6_find_1stfragopt);
 static int xfrm6_tunnel_check_size(struct sk_buff *skb)
 {
 	int mtu, ret = 0;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 
 	mtu = dst_mtu(dst);
 	if (mtu < IPV6_MIN_MTU)
@@ -90,6 +90,6 @@ static int xfrm6_output_finish(struct sk_buff *skb)
 
 int xfrm6_output(struct sk_buff *skb)
 {
-	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb->dst->dev,
+	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb_dst(skb)->dev,
 		       xfrm6_output_finish);
 }
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
index 2562ebc1b22..7af2e74deda 100644
--- a/net/irda/irlap_frame.c
+++ b/net/irda/irlap_frame.c
@@ -982,17 +982,12 @@ void irlap_resend_rejected_frames(struct irlap_cb *self, int command)
 {
 	struct sk_buff *tx_skb;
 	struct sk_buff *skb;
-	int count;
 
 	IRDA_ASSERT(self != NULL, return;);
 	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
 
-	/* Initialize variables */
-	count = skb_queue_len(&self->wx_list);
-
 	/*  Resend unacknowledged frame(s) */
-	skb = skb_peek(&self->wx_list);
-	while (skb != NULL) {
+	skb_queue_walk(&self->wx_list, skb) {
 		irlap_wait_min_turn_around(self, &self->qos_tx);
 
 		/* We copy the skb to be retransmitted since we will have to
@@ -1011,21 +1006,12 @@ void irlap_resend_rejected_frames(struct irlap_cb *self, int command)
 		/*
 		 *  Set poll bit on the last frame retransmitted
 		 */
-		if (count-- == 1)
+		if (skb_queue_is_last(&self->wx_list, skb))
 			tx_skb->data[1] |= PF_BIT; /* Set p/f bit */
 		else
 			tx_skb->data[1] &= ~PF_BIT; /* Clear p/f bit */
 
 		irlap_send_i_frame(self, tx_skb, command);
-
-		/*
-		 *  If our skb is the last buffer in the list, then
-		 *  we are finished, if not, move to the next sk-buffer
-		 */
-		if (skb == skb_peek_tail(&self->wx_list))
-			skb = NULL;
-		else
-			skb = skb->next;
 	}
 #if 0 /* Not yet */
 	/*
diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c
index 2f05ec1037a..8dd7ed7e7c1 100644
--- a/net/irda/irnetlink.c
+++ b/net/irda/irnetlink.c
@@ -87,7 +87,7 @@ static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info)
 	if (!dev)
 		return -ENODEV;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		dev_put(dev);
 		return -ENOMEM;
@@ -148,21 +148,8 @@ static struct genl_ops irda_nl_ops[] = {
 
 int irda_nl_register(void)
 {
-	int err, i;
-
-	err = genl_register_family(&irda_nl_family);
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(irda_nl_ops); i++) {
-		err = genl_register_ops(&irda_nl_family, &irda_nl_ops[i]);
-		if (err)
-			goto err_out;
-	}
-	return 0;
- err_out:
-	genl_unregister_family(&irda_nl_family);
-	return err;
+	return genl_register_family_with_ops(&irda_nl_family,
+		irda_nl_ops, ARRAY_SIZE(irda_nl_ops));
 }
 
 void irda_nl_unregister(void)
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index b51c9187c34..656cbd19582 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -1,11 +1,12 @@
 /*
- *  linux/net/iucv/af_iucv.c
- *
  *  IUCV protocol stack for Linux on zSeries
  *
- *  Copyright 2006 IBM Corporation
+ *  Copyright IBM Corp. 2006, 2009
  *
  *  Author(s):	Jennifer Hunt <jenhunt@us.ibm.com>
+ *		Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ *  PM functions:
+ *		Ursula Braun <ursula.braun@de.ibm.com>
  */
 
 #define KMSG_COMPONENT "af_iucv"
@@ -29,10 +30,7 @@
 #include <net/iucv/iucv.h>
 #include <net/iucv/af_iucv.h>
 
-#define CONFIG_IUCV_SOCK_DEBUG 1
-
-#define IPRMDATA 0x80
-#define VERSION "1.0"
+#define VERSION "1.1"
 
 static char iucv_userid[80];
 
@@ -44,6 +42,19 @@ static struct proto iucv_proto = {
 	.obj_size	= sizeof(struct iucv_sock),
 };
 
+/* special AF_IUCV IPRM messages */
+static const u8 iprm_shutdown[8] =
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01};
+
+#define TRGCLS_SIZE	(sizeof(((struct iucv_message *)0)->class))
+
+/* macros to set/get socket control buffer at correct offset */
+#define CB_TAG(skb)	((skb)->cb)		/* iucv message tag */
+#define CB_TAG_LEN	(sizeof(((struct iucv_message *) 0)->tag))
+#define CB_TRGCLS(skb)	((skb)->cb + CB_TAG_LEN) /* iucv msg target class */
+#define CB_TRGCLS_LEN	(TRGCLS_SIZE)
+
+
 static void iucv_sock_kill(struct sock *sk);
 static void iucv_sock_close(struct sock *sk);
 
@@ -54,6 +65,7 @@ static void iucv_callback_connack(struct iucv_path *, u8 ipuser[16]);
 static int iucv_callback_connreq(struct iucv_path *, u8 ipvmid[8],
 				 u8 ipuser[16]);
 static void iucv_callback_connrej(struct iucv_path *, u8 ipuser[16]);
+static void iucv_callback_shutdown(struct iucv_path *, u8 ipuser[16]);
 
 static struct iucv_sock_list iucv_sk_list = {
 	.lock = __RW_LOCK_UNLOCKED(iucv_sk_list.lock),
@@ -65,7 +77,8 @@ static struct iucv_handler af_iucv_handler = {
 	.path_complete	  = iucv_callback_connack,
 	.path_severed	  = iucv_callback_connrej,
 	.message_pending  = iucv_callback_rx,
-	.message_complete = iucv_callback_txdone
+	.message_complete = iucv_callback_txdone,
+	.path_quiesced	  = iucv_callback_shutdown,
 };
 
 static inline void high_nmcpy(unsigned char *dst, char *src)
@@ -78,6 +91,153 @@ static inline void low_nmcpy(unsigned char *dst, char *src)
        memcpy(&dst[8], src, 8);
 }
 
+static int afiucv_pm_prepare(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_prepare\n");
+#endif
+	return 0;
+}
+
+static void afiucv_pm_complete(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_complete\n");
+#endif
+	return;
+}
+
+/**
+ * afiucv_pm_freeze() - Freeze PM callback
+ * @dev:	AFIUCV dummy device
+ *
+ * Sever all established IUCV communication pathes
+ */
+static int afiucv_pm_freeze(struct device *dev)
+{
+	struct iucv_sock *iucv;
+	struct sock *sk;
+	struct hlist_node *node;
+	int err = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_freeze\n");
+#endif
+	read_lock(&iucv_sk_list.lock);
+	sk_for_each(sk, node, &iucv_sk_list.head) {
+		iucv = iucv_sk(sk);
+		skb_queue_purge(&iucv->send_skb_q);
+		skb_queue_purge(&iucv->backlog_skb_q);
+		switch (sk->sk_state) {
+		case IUCV_SEVERED:
+		case IUCV_DISCONN:
+		case IUCV_CLOSING:
+		case IUCV_CONNECTED:
+			if (iucv->path) {
+				err = iucv_path_sever(iucv->path, NULL);
+				iucv_path_free(iucv->path);
+				iucv->path = NULL;
+			}
+			break;
+		case IUCV_OPEN:
+		case IUCV_BOUND:
+		case IUCV_LISTEN:
+		case IUCV_CLOSED:
+		default:
+			break;
+		}
+	}
+	read_unlock(&iucv_sk_list.lock);
+	return err;
+}
+
+/**
+ * afiucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev:	AFIUCV dummy device
+ *
+ * socket clean up after freeze
+ */
+static int afiucv_pm_restore_thaw(struct device *dev)
+{
+	struct iucv_sock *iucv;
+	struct sock *sk;
+	struct hlist_node *node;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_restore_thaw\n");
+#endif
+	read_lock(&iucv_sk_list.lock);
+	sk_for_each(sk, node, &iucv_sk_list.head) {
+		iucv = iucv_sk(sk);
+		switch (sk->sk_state) {
+		case IUCV_CONNECTED:
+			sk->sk_err = EPIPE;
+			sk->sk_state = IUCV_DISCONN;
+			sk->sk_state_change(sk);
+			break;
+		case IUCV_DISCONN:
+		case IUCV_SEVERED:
+		case IUCV_CLOSING:
+		case IUCV_LISTEN:
+		case IUCV_BOUND:
+		case IUCV_OPEN:
+		default:
+			break;
+		}
+	}
+	read_unlock(&iucv_sk_list.lock);
+	return 0;
+}
+
+static struct dev_pm_ops afiucv_pm_ops = {
+	.prepare = afiucv_pm_prepare,
+	.complete = afiucv_pm_complete,
+	.freeze = afiucv_pm_freeze,
+	.thaw = afiucv_pm_restore_thaw,
+	.restore = afiucv_pm_restore_thaw,
+};
+
+static struct device_driver af_iucv_driver = {
+	.owner = THIS_MODULE,
+	.name = "afiucv",
+	.bus  = &iucv_bus,
+	.pm   = &afiucv_pm_ops,
+};
+
+/* dummy device used as trigger for PM functions */
+static struct device *af_iucv_dev;
+
+/**
+ * iucv_msg_length() - Returns the length of an iucv message.
+ * @msg:	Pointer to struct iucv_message, MUST NOT be NULL
+ *
+ * The function returns the length of the specified iucv message @msg of data
+ * stored in a buffer and of data stored in the parameter list (PRMDATA).
+ *
+ * For IUCV_IPRMDATA, AF_IUCV uses the following convention to transport socket
+ * data:
+ *	PRMDATA[0..6]	socket data (max 7 bytes);
+ *	PRMDATA[7]	socket data length value (len is 0xff - PRMDATA[7])
+ *
+ * The socket data length is computed by substracting the socket data length
+ * value from 0xFF.
+ * If the socket data len is greater 7, then PRMDATA can be used for special
+ * notifications (see iucv_sock_shutdown); and further,
+ * if the socket data len is > 7, the function returns 8.
+ *
+ * Use this function to allocate socket buffers to store iucv message data.
+ */
+static inline size_t iucv_msg_length(struct iucv_message *msg)
+{
+	size_t datalen;
+
+	if (msg->flags & IUCV_IPRMDATA) {
+		datalen = 0xff - msg->rmmsg[7];
+		return (datalen < 8) ? datalen : 8;
+	}
+	return msg->length;
+}
+
 /* Timers */
 static void iucv_sock_timeout(unsigned long arg)
 {
@@ -225,6 +385,8 @@ static struct sock *iucv_sock_alloc(struct socket *sock, int proto, gfp_t prio)
 	spin_lock_init(&iucv_sk(sk)->message_q.lock);
 	skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q);
 	iucv_sk(sk)->send_tag = 0;
+	iucv_sk(sk)->flags = 0;
+	iucv_sk(sk)->msglimit = IUCV_QUEUELEN_DEFAULT;
 	iucv_sk(sk)->path = NULL;
 	memset(&iucv_sk(sk)->src_user_id , 0, 32);
 
@@ -248,11 +410,22 @@ static int iucv_sock_create(struct net *net, struct socket *sock, int protocol)
 {
 	struct sock *sk;
 
-	if (sock->type != SOCK_STREAM)
-		return -ESOCKTNOSUPPORT;
+	if (protocol && protocol != PF_IUCV)
+		return -EPROTONOSUPPORT;
 
 	sock->state = SS_UNCONNECTED;
-	sock->ops = &iucv_sock_ops;
+
+	switch (sock->type) {
+	case SOCK_STREAM:
+		sock->ops = &iucv_sock_ops;
+		break;
+	case SOCK_SEQPACKET:
+		/* currently, proto ops can handle both sk types */
+		sock->ops = &iucv_sock_ops;
+		break;
+	default:
+		return -ESOCKTNOSUPPORT;
+	}
 
 	sk = iucv_sock_alloc(sock, protocol, GFP_KERNEL);
 	if (!sk)
@@ -463,11 +636,9 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 	if (sk->sk_state != IUCV_OPEN && sk->sk_state != IUCV_BOUND)
 		return -EBADFD;
 
-	if (sk->sk_type != SOCK_STREAM)
+	if (sk->sk_type != SOCK_STREAM && sk->sk_type != SOCK_SEQPACKET)
 		return -EINVAL;
 
-	iucv = iucv_sk(sk);
-
 	if (sk->sk_state == IUCV_OPEN) {
 		err = iucv_sock_autobind(sk);
 		if (unlikely(err))
@@ -486,8 +657,8 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 
 	iucv = iucv_sk(sk);
 	/* Create path. */
-	iucv->path = iucv_path_alloc(IUCV_QUEUELEN_DEFAULT,
-				     IPRMDATA, GFP_KERNEL);
+	iucv->path = iucv_path_alloc(iucv->msglimit,
+				     IUCV_IPRMDATA, GFP_KERNEL);
 	if (!iucv->path) {
 		err = -ENOMEM;
 		goto done;
@@ -521,8 +692,7 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 	}
 
 	if (sk->sk_state == IUCV_DISCONN) {
-		release_sock(sk);
-		return -ECONNREFUSED;
+		err = -ECONNREFUSED;
 	}
 
 	if (err) {
@@ -545,7 +715,10 @@ static int iucv_sock_listen(struct socket *sock, int backlog)
 	lock_sock(sk);
 
 	err = -EINVAL;
-	if (sk->sk_state != IUCV_BOUND || sock->type != SOCK_STREAM)
+	if (sk->sk_state != IUCV_BOUND)
+		goto done;
+
+	if (sock->type != SOCK_STREAM && sock->type != SOCK_SEQPACKET)
 		goto done;
 
 	sk->sk_max_ack_backlog = backlog;
@@ -636,6 +809,30 @@ static int iucv_sock_getname(struct socket *sock, struct sockaddr *addr,
 	return 0;
 }
 
+/**
+ * iucv_send_iprm() - Send socket data in parameter list of an iucv message.
+ * @path:	IUCV path
+ * @msg:	Pointer to a struct iucv_message
+ * @skb:	The socket data to send, skb->len MUST BE <= 7
+ *
+ * Send the socket data in the parameter list in the iucv message
+ * (IUCV_IPRMDATA). The socket data is stored at index 0 to 6 in the parameter
+ * list and the socket data len at index 7 (last byte).
+ * See also iucv_msg_length().
+ *
+ * Returns the error code from the iucv_message_send() call.
+ */
+static int iucv_send_iprm(struct iucv_path *path, struct iucv_message *msg,
+			  struct sk_buff *skb)
+{
+	u8 prmdata[8];
+
+	memcpy(prmdata, (void *) skb->data, skb->len);
+	prmdata[7] = 0xff - (u8) skb->len;
+	return iucv_message_send(path, msg, IUCV_IPRMDATA, 0,
+				 (void *) prmdata, 8);
+}
+
 static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 			     struct msghdr *msg, size_t len)
 {
@@ -643,6 +840,8 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	struct iucv_sock *iucv = iucv_sk(sk);
 	struct sk_buff *skb;
 	struct iucv_message txmsg;
+	struct cmsghdr *cmsg;
+	int cmsg_done;
 	char user_id[9];
 	char appl_id[9];
 	int err;
@@ -654,6 +853,10 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	if (msg->msg_flags & MSG_OOB)
 		return -EOPNOTSUPP;
 
+	/* SOCK_SEQPACKET: we do not support segmented records */
+	if (sk->sk_type == SOCK_SEQPACKET && !(msg->msg_flags & MSG_EOR))
+		return -EOPNOTSUPP;
+
 	lock_sock(sk);
 
 	if (sk->sk_shutdown & SEND_SHUTDOWN) {
@@ -662,6 +865,52 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	}
 
 	if (sk->sk_state == IUCV_CONNECTED) {
+		/* initialize defaults */
+		cmsg_done   = 0;	/* check for duplicate headers */
+		txmsg.class = 0;
+
+		/* iterate over control messages */
+		for (cmsg = CMSG_FIRSTHDR(msg); cmsg;
+		     cmsg = CMSG_NXTHDR(msg, cmsg)) {
+
+			if (!CMSG_OK(msg, cmsg)) {
+				err = -EINVAL;
+				goto out;
+			}
+
+			if (cmsg->cmsg_level != SOL_IUCV)
+				continue;
+
+			if (cmsg->cmsg_type & cmsg_done) {
+				err = -EINVAL;
+				goto out;
+			}
+			cmsg_done |= cmsg->cmsg_type;
+
+			switch (cmsg->cmsg_type) {
+			case SCM_IUCV_TRGCLS:
+				if (cmsg->cmsg_len != CMSG_LEN(TRGCLS_SIZE)) {
+					err = -EINVAL;
+					goto out;
+				}
+
+				/* set iucv message target class */
+				memcpy(&txmsg.class,
+					(void *) CMSG_DATA(cmsg), TRGCLS_SIZE);
+
+				break;
+
+			default:
+				err = -EINVAL;
+				goto out;
+				break;
+			}
+		}
+
+		/* allocate one skb for each iucv message:
+		 * this is fine for SOCK_SEQPACKET (unless we want to support
+		 * segmented records using the MSG_EOR flag), but
+		 * for SOCK_STREAM we might want to improve it in future */
 		if (!(skb = sock_alloc_send_skb(sk, len,
 						msg->msg_flags & MSG_DONTWAIT,
 						&err)))
@@ -672,13 +921,33 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 			goto fail;
 		}
 
-		txmsg.class = 0;
-		memcpy(&txmsg.class, skb->data, skb->len >= 4 ? 4 : skb->len);
+		/* increment and save iucv message tag for msg_completion cbk */
 		txmsg.tag = iucv->send_tag++;
-		memcpy(skb->cb, &txmsg.tag, 4);
+		memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN);
 		skb_queue_tail(&iucv->send_skb_q, skb);
-		err = iucv_message_send(iucv->path, &txmsg, 0, 0,
-					(void *) skb->data, skb->len);
+
+		if (((iucv->path->flags & IUCV_IPRMDATA) & iucv->flags)
+		    && skb->len <= 7) {
+			err = iucv_send_iprm(iucv->path, &txmsg, skb);
+
+			/* on success: there is no message_complete callback
+			 * for an IPRMDATA msg; remove skb from send queue */
+			if (err == 0) {
+				skb_unlink(skb, &iucv->send_skb_q);
+				kfree_skb(skb);
+			}
+
+			/* this error should never happen since the
+			 * IUCV_IPRMDATA path flag is set... sever path */
+			if (err == 0x15) {
+				iucv_path_sever(iucv->path, NULL);
+				skb_unlink(skb, &iucv->send_skb_q);
+				err = -EPIPE;
+				goto fail;
+			}
+		} else
+			err = iucv_message_send(iucv->path, &txmsg, 0, 0,
+						(void *) skb->data, skb->len);
 		if (err) {
 			if (err == 3) {
 				user_id[8] = 0;
@@ -725,6 +994,10 @@ static int iucv_fragment_skb(struct sock *sk, struct sk_buff *skb, int len)
 		if (!nskb)
 			return -ENOMEM;
 
+		/* copy target class to control buffer of new skb */
+		memcpy(CB_TRGCLS(nskb), CB_TRGCLS(skb), CB_TRGCLS_LEN);
+
+		/* copy data fragment */
 		memcpy(nskb->data, skb->data + copied, size);
 		copied += size;
 		dataleft -= size;
@@ -744,19 +1017,33 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb,
 				 struct iucv_message *msg)
 {
 	int rc;
+	unsigned int len;
+
+	len = iucv_msg_length(msg);
+
+	/* store msg target class in the second 4 bytes of skb ctrl buffer */
+	/* Note: the first 4 bytes are reserved for msg tag */
+	memcpy(CB_TRGCLS(skb), &msg->class, CB_TRGCLS_LEN);
 
-	if (msg->flags & IPRMDATA) {
-		skb->data = NULL;
-		skb->len = 0;
+	/* check for special IPRM messages (e.g. iucv_sock_shutdown) */
+	if ((msg->flags & IUCV_IPRMDATA) && len > 7) {
+		if (memcmp(msg->rmmsg, iprm_shutdown, 8) == 0) {
+			skb->data = NULL;
+			skb->len = 0;
+		}
 	} else {
-		rc = iucv_message_receive(path, msg, 0, skb->data,
-					  msg->length, NULL);
+		rc = iucv_message_receive(path, msg, msg->flags & IUCV_IPRMDATA,
+					  skb->data, len, NULL);
 		if (rc) {
 			kfree_skb(skb);
 			return;
 		}
-		if (skb->truesize >= sk->sk_rcvbuf / 4) {
-			rc = iucv_fragment_skb(sk, skb, msg->length);
+		/* we need to fragment iucv messages for SOCK_STREAM only;
+		 * for SOCK_SEQPACKET, it is only relevant if we support
+		 * record segmentation using MSG_EOR (see also recvmsg()) */
+		if (sk->sk_type == SOCK_STREAM &&
+		    skb->truesize >= sk->sk_rcvbuf / 4) {
+			rc = iucv_fragment_skb(sk, skb, len);
 			kfree_skb(skb);
 			skb = NULL;
 			if (rc) {
@@ -767,7 +1054,7 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb,
 		} else {
 			skb_reset_transport_header(skb);
 			skb_reset_network_header(skb);
-			skb->len = msg->length;
+			skb->len = len;
 		}
 	}
 
@@ -782,7 +1069,7 @@ static void iucv_process_message_q(struct sock *sk)
 	struct sock_msg_q *p, *n;
 
 	list_for_each_entry_safe(p, n, &iucv->message_q.list, list) {
-		skb = alloc_skb(p->msg.length, GFP_ATOMIC | GFP_DMA);
+		skb = alloc_skb(iucv_msg_length(&p->msg), GFP_ATOMIC | GFP_DMA);
 		if (!skb)
 			break;
 		iucv_process_message(sk, skb, p->path, &p->msg);
@@ -799,7 +1086,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	int noblock = flags & MSG_DONTWAIT;
 	struct sock *sk = sock->sk;
 	struct iucv_sock *iucv = iucv_sk(sk);
-	int target, copied = 0;
+	unsigned int copied, rlen;
 	struct sk_buff *skb, *rskb, *cskb;
 	int err = 0;
 
@@ -812,8 +1099,6 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	if (flags & (MSG_OOB))
 		return -EOPNOTSUPP;
 
-	target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
-
 	/* receive/dequeue next skb:
 	 * the function understands MSG_PEEK and, thus, does not dequeue skb */
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
@@ -823,25 +1108,45 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 		return err;
 	}
 
-	copied = min_t(unsigned int, skb->len, len);
+	rlen   = skb->len;		/* real length of skb */
+	copied = min_t(unsigned int, rlen, len);
 
 	cskb = skb;
 	if (memcpy_toiovec(msg->msg_iov, cskb->data, copied)) {
-		skb_queue_head(&sk->sk_receive_queue, skb);
-		if (copied == 0)
-			return -EFAULT;
-		goto done;
+		if (!(flags & MSG_PEEK))
+			skb_queue_head(&sk->sk_receive_queue, skb);
+		return -EFAULT;
+	}
+
+	/* SOCK_SEQPACKET: set MSG_TRUNC if recv buf size is too small */
+	if (sk->sk_type == SOCK_SEQPACKET) {
+		if (copied < rlen)
+			msg->msg_flags |= MSG_TRUNC;
+		/* each iucv message contains a complete record */
+		msg->msg_flags |= MSG_EOR;
 	}
 
-	len -= copied;
+	/* create control message to store iucv msg target class:
+	 * get the trgcls from the control buffer of the skb due to
+	 * fragmentation of original iucv message. */
+	err = put_cmsg(msg, SOL_IUCV, SCM_IUCV_TRGCLS,
+			CB_TRGCLS_LEN, CB_TRGCLS(skb));
+	if (err) {
+		if (!(flags & MSG_PEEK))
+			skb_queue_head(&sk->sk_receive_queue, skb);
+		return err;
+	}
 
 	/* Mark read part of skb as used */
 	if (!(flags & MSG_PEEK)) {
-		skb_pull(skb, copied);
 
-		if (skb->len) {
-			skb_queue_head(&sk->sk_receive_queue, skb);
-			goto done;
+		/* SOCK_STREAM: re-queue skb if it contains unreceived data */
+		if (sk->sk_type == SOCK_STREAM) {
+			skb_pull(skb, copied);
+			if (skb->len) {
+				skb_queue_head(&sk->sk_receive_queue, skb);
+				goto done;
+			}
 		}
 
 		kfree_skb(skb);
@@ -866,7 +1171,11 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	}
 
 done:
-	return err ? : copied;
+	/* SOCK_SEQPACKET: return real length if MSG_TRUNC is set */
+	if (sk->sk_type == SOCK_SEQPACKET && (flags & MSG_TRUNC))
+		copied = rlen;
+
+	return copied;
 }
 
 static inline unsigned int iucv_accept_poll(struct sock *parent)
@@ -928,7 +1237,6 @@ static int iucv_sock_shutdown(struct socket *sock, int how)
 	struct iucv_sock *iucv = iucv_sk(sk);
 	struct iucv_message txmsg;
 	int err = 0;
-	u8 prmmsg[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01};
 
 	how++;
 
@@ -953,7 +1261,7 @@ static int iucv_sock_shutdown(struct socket *sock, int how)
 		txmsg.class = 0;
 		txmsg.tag = 0;
 		err = iucv_message_send(iucv->path, &txmsg, IUCV_IPRMDATA, 0,
-					(void *) prmmsg, 8);
+					(void *) iprm_shutdown, 8);
 		if (err) {
 			switch (err) {
 			case 1:
@@ -1007,6 +1315,98 @@ static int iucv_sock_release(struct socket *sock)
 	return err;
 }
 
+/* getsockopt and setsockopt */
+static int iucv_sock_setsockopt(struct socket *sock, int level, int optname,
+				char __user *optval, int optlen)
+{
+	struct sock *sk = sock->sk;
+	struct iucv_sock *iucv = iucv_sk(sk);
+	int val;
+	int rc;
+
+	if (level != SOL_IUCV)
+		return -ENOPROTOOPT;
+
+	if (optlen < sizeof(int))
+		return -EINVAL;
+
+	if (get_user(val, (int __user *) optval))
+		return -EFAULT;
+
+	rc = 0;
+
+	lock_sock(sk);
+	switch (optname) {
+	case SO_IPRMDATA_MSG:
+		if (val)
+			iucv->flags |= IUCV_IPRMDATA;
+		else
+			iucv->flags &= ~IUCV_IPRMDATA;
+		break;
+	case SO_MSGLIMIT:
+		switch (sk->sk_state) {
+		case IUCV_OPEN:
+		case IUCV_BOUND:
+			if (val < 1 || val > (u16)(~0))
+				rc = -EINVAL;
+			else
+				iucv->msglimit = val;
+			break;
+		default:
+			rc = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		rc = -ENOPROTOOPT;
+		break;
+	}
+	release_sock(sk);
+
+	return rc;
+}
+
+static int iucv_sock_getsockopt(struct socket *sock, int level, int optname,
+				char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	struct iucv_sock *iucv = iucv_sk(sk);
+	int val, len;
+
+	if (level != SOL_IUCV)
+		return -ENOPROTOOPT;
+
+	if (get_user(len, optlen))
+		return -EFAULT;
+
+	if (len < 0)
+		return -EINVAL;
+
+	len = min_t(unsigned int, len, sizeof(int));
+
+	switch (optname) {
+	case SO_IPRMDATA_MSG:
+		val = (iucv->flags & IUCV_IPRMDATA) ? 1 : 0;
+		break;
+	case SO_MSGLIMIT:
+		lock_sock(sk);
+		val = (iucv->path != NULL) ? iucv->path->msglim	/* connected */
+					   : iucv->msglimit;	/* default */
+		release_sock(sk);
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+
+	if (put_user(len, optlen))
+		return -EFAULT;
+	if (copy_to_user(optval, &val, len))
+		return -EFAULT;
+
+	return 0;
+}
+
+
 /* Callback wrappers - called from iucv base support */
 static int iucv_callback_connreq(struct iucv_path *path,
 				 u8 ipvmid[8], u8 ipuser[16])
@@ -1060,7 +1460,7 @@ static int iucv_callback_connreq(struct iucv_path *path,
 	}
 
 	/* Create the new socket */
-	nsk = iucv_sock_alloc(NULL, SOCK_STREAM, GFP_ATOMIC);
+	nsk = iucv_sock_alloc(NULL, sk->sk_type, GFP_ATOMIC);
 	if (!nsk) {
 		err = iucv_path_sever(path, user_data);
 		iucv_path_free(path);
@@ -1083,7 +1483,9 @@ static int iucv_callback_connreq(struct iucv_path *path,
 	memcpy(nuser_data + 8, niucv->src_name, 8);
 	ASCEBC(nuser_data + 8, 8);
 
-	path->msglim = IUCV_QUEUELEN_DEFAULT;
+	/* set message limit for path based on msglimit of accepting socket */
+	niucv->msglimit = iucv->msglimit;
+	path->msglim = iucv->msglimit;
 	err = iucv_path_accept(path, &af_iucv_handler, nuser_data, nsk);
 	if (err) {
 		err = iucv_path_sever(path, user_data);
@@ -1131,19 +1533,17 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg)
 		goto save_message;
 
 	len = atomic_read(&sk->sk_rmem_alloc);
-	len += msg->length + sizeof(struct sk_buff);
+	len += iucv_msg_length(msg) + sizeof(struct sk_buff);
 	if (len > sk->sk_rcvbuf)
 		goto save_message;
 
-	skb = alloc_skb(msg->length, GFP_ATOMIC | GFP_DMA);
+	skb = alloc_skb(iucv_msg_length(msg), GFP_ATOMIC | GFP_DMA);
 	if (!skb)
 		goto save_message;
 
 	iucv_process_message(sk, skb, path, msg);
 	goto out_unlock;
 
-	return;
-
 save_message:
 	save_msg = kzalloc(sizeof(struct sock_msg_q), GFP_ATOMIC | GFP_DMA);
 	if (!save_msg)
@@ -1170,7 +1570,7 @@ static void iucv_callback_txdone(struct iucv_path *path,
 		spin_lock_irqsave(&list->lock, flags);
 
 		while (list_skb != (struct sk_buff *)list) {
-			if (!memcmp(&msg->tag, list_skb->cb, 4)) {
+			if (!memcmp(&msg->tag, CB_TAG(list_skb), CB_TAG_LEN)) {
 				this = list_skb;
 				break;
 			}
@@ -1206,6 +1606,21 @@ static void iucv_callback_connrej(struct iucv_path *path, u8 ipuser[16])
 	sk->sk_state_change(sk);
 }
 
+/* called if the other communication side shuts down its RECV direction;
+ * in turn, the callback sets SEND_SHUTDOWN to disable sending of data.
+ */
+static void iucv_callback_shutdown(struct iucv_path *path, u8 ipuser[16])
+{
+	struct sock *sk = path->private;
+
+	bh_lock_sock(sk);
+	if (sk->sk_state != IUCV_CLOSED) {
+		sk->sk_shutdown |= SEND_SHUTDOWN;
+		sk->sk_state_change(sk);
+	}
+	bh_unlock_sock(sk);
+}
+
 static struct proto_ops iucv_sock_ops = {
 	.family		= PF_IUCV,
 	.owner		= THIS_MODULE,
@@ -1222,8 +1637,8 @@ static struct proto_ops iucv_sock_ops = {
 	.mmap		= sock_no_mmap,
 	.socketpair	= sock_no_socketpair,
 	.shutdown	= iucv_sock_shutdown,
-	.setsockopt	= sock_no_setsockopt,
-	.getsockopt	= sock_no_getsockopt
+	.setsockopt	= iucv_sock_setsockopt,
+	.getsockopt	= iucv_sock_getsockopt,
 };
 
 static struct net_proto_family iucv_sock_family_ops = {
@@ -1258,8 +1673,30 @@ static int __init afiucv_init(void)
 	err = sock_register(&iucv_sock_family_ops);
 	if (err)
 		goto out_proto;
+	/* establish dummy device */
+	err = driver_register(&af_iucv_driver);
+	if (err)
+		goto out_sock;
+	af_iucv_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!af_iucv_dev) {
+		err = -ENOMEM;
+		goto out_driver;
+	}
+	dev_set_name(af_iucv_dev, "af_iucv");
+	af_iucv_dev->bus = &iucv_bus;
+	af_iucv_dev->parent = iucv_root;
+	af_iucv_dev->release = (void (*)(struct device *))kfree;
+	af_iucv_dev->driver = &af_iucv_driver;
+	err = device_register(af_iucv_dev);
+	if (err)
+		goto out_driver;
+
 	return 0;
 
+out_driver:
+	driver_unregister(&af_iucv_driver);
+out_sock:
+	sock_unregister(PF_IUCV);
 out_proto:
 	proto_unregister(&iucv_proto);
 out_iucv:
@@ -1270,6 +1707,8 @@ out:
 
 static void __exit afiucv_exit(void)
 {
+	device_unregister(af_iucv_dev);
+	driver_unregister(&af_iucv_driver);
 	sock_unregister(PF_IUCV);
 	proto_unregister(&iucv_proto);
 	iucv_unregister(&af_iucv_handler, 0);
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index a35240f61ec..c833481d32e 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -1,7 +1,8 @@
 /*
  * IUCV base infrastructure.
  *
- * Copyright 2001, 2006 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2001, 2009
+ *
  * Author(s):
  *    Original source:
  *	Alan Altmark (Alan_Altmark@us.ibm.com)	Sept. 2000
@@ -10,6 +11,8 @@
  *	Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
  *    Rewritten for af_iucv:
  *	Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *    PM functions:
+ *	Ursula Braun (ursula.braun@de.ibm.com)
  *
  * Documentation used:
  *    The original source
@@ -45,6 +48,7 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/cpu.h>
+#include <linux/reboot.h>
 #include <net/iucv/iucv.h>
 #include <asm/atomic.h>
 #include <asm/ebcdic.h>
@@ -75,9 +79,24 @@ static int iucv_bus_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
+static int iucv_pm_prepare(struct device *);
+static void iucv_pm_complete(struct device *);
+static int iucv_pm_freeze(struct device *);
+static int iucv_pm_thaw(struct device *);
+static int iucv_pm_restore(struct device *);
+
+static struct dev_pm_ops iucv_pm_ops = {
+	.prepare = iucv_pm_prepare,
+	.complete = iucv_pm_complete,
+	.freeze = iucv_pm_freeze,
+	.thaw = iucv_pm_thaw,
+	.restore = iucv_pm_restore,
+};
+
 struct bus_type iucv_bus = {
 	.name = "iucv",
 	.match = iucv_bus_match,
+	.pm = &iucv_pm_ops,
 };
 EXPORT_SYMBOL(iucv_bus);
 
@@ -147,6 +166,7 @@ enum iucv_command_codes {
 	IUCV_RESUME = 14,
 	IUCV_SEVER = 15,
 	IUCV_SETMASK = 16,
+	IUCV_SETCONTROLMASK = 17,
 };
 
 /*
@@ -280,6 +300,7 @@ union iucv_param {
  * Anchor for per-cpu IUCV command parameter block.
  */
 static union iucv_param *iucv_param[NR_CPUS];
+static union iucv_param *iucv_param_irq[NR_CPUS];
 
 /**
  * iucv_call_b2f0
@@ -358,11 +379,23 @@ static void iucv_allow_cpu(void *data)
 	 *	0x10 - Flag to allow priority message completion interrupts
 	 *	0x08 - Flag to allow IUCV control interrupts
 	 */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->set_mask.ipmask = 0xf8;
 	iucv_call_b2f0(IUCV_SETMASK, parm);
 
+	/*
+	 * Enable all iucv control interrupts.
+	 * ipmask contains bits for the different interrupts
+	 *	0x80 - Flag to allow pending connections interrupts
+	 *	0x40 - Flag to allow connection complete interrupts
+	 *	0x20 - Flag to allow connection severed interrupts
+	 *	0x10 - Flag to allow connection quiesced interrupts
+	 *	0x08 - Flag to allow connection resumed interrupts
+	 */
+	memset(parm, 0, sizeof(union iucv_param));
+	parm->set_mask.ipmask = 0xf8;
+	iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
 	/* Set indication that iucv interrupts are allowed for this cpu. */
 	cpu_set(cpu, iucv_irq_cpumask);
 }
@@ -379,7 +412,7 @@ static void iucv_block_cpu(void *data)
 	union iucv_param *parm;
 
 	/* Disable all iucv interrupts. */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	memset(parm, 0, sizeof(union iucv_param));
 	iucv_call_b2f0(IUCV_SETMASK, parm);
 
@@ -388,6 +421,31 @@ static void iucv_block_cpu(void *data)
 }
 
 /**
+ * iucv_block_cpu_almost
+ * @data: unused
+ *
+ * Allow connection-severed interrupts only on this cpu.
+ */
+static void iucv_block_cpu_almost(void *data)
+{
+	int cpu = smp_processor_id();
+	union iucv_param *parm;
+
+	/* Allow iucv control interrupts only */
+	parm = iucv_param_irq[cpu];
+	memset(parm, 0, sizeof(union iucv_param));
+	parm->set_mask.ipmask = 0x08;
+	iucv_call_b2f0(IUCV_SETMASK, parm);
+	/* Allow iucv-severed interrupt only */
+	memset(parm, 0, sizeof(union iucv_param));
+	parm->set_mask.ipmask = 0x20;
+	iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
+
+	/* Clear indication that iucv interrupts are allowed for this cpu. */
+	cpu_clear(cpu, iucv_irq_cpumask);
+}
+
+/**
  * iucv_declare_cpu
  * @data: unused
  *
@@ -403,7 +461,7 @@ static void iucv_declare_cpu(void *data)
 		return;
 
 	/* Declare interrupt buffer. */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->db.ipbfadr1 = virt_to_phys(iucv_irq_data[cpu]);
 	rc = iucv_call_b2f0(IUCV_DECLARE_BUFFER, parm);
@@ -460,7 +518,7 @@ static void iucv_retrieve_cpu(void *data)
 	iucv_block_cpu(NULL);
 
 	/* Retrieve interrupt buffer. */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	iucv_call_b2f0(IUCV_RETRIEVE_BUFFER, parm);
 
 	/* Clear indication that an iucv buffer exists for this cpu. */
@@ -574,11 +632,22 @@ static int __cpuinit iucv_cpu_notify(struct notifier_block *self,
 			iucv_irq_data[cpu] = NULL;
 			return NOTIFY_BAD;
 		}
+		iucv_param_irq[cpu] = kmalloc_node(sizeof(union iucv_param),
+					GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+		if (!iucv_param_irq[cpu]) {
+			kfree(iucv_param[cpu]);
+			iucv_param[cpu] = NULL;
+			kfree(iucv_irq_data[cpu]);
+			iucv_irq_data[cpu] = NULL;
+			return NOTIFY_BAD;
+		}
 		break;
 	case CPU_UP_CANCELED:
 	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
+		kfree(iucv_param_irq[cpu]);
+		iucv_param_irq[cpu] = NULL;
 		kfree(iucv_param[cpu]);
 		iucv_param[cpu] = NULL;
 		kfree(iucv_irq_data[cpu]);
@@ -625,7 +694,7 @@ static int iucv_sever_pathid(u16 pathid, u8 userdata[16])
 {
 	union iucv_param *parm;
 
-	parm = iucv_param[smp_processor_id()];
+	parm = iucv_param_irq[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (userdata)
 		memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
@@ -746,6 +815,28 @@ void iucv_unregister(struct iucv_handler *handler, int smp)
 }
 EXPORT_SYMBOL(iucv_unregister);
 
+static int iucv_reboot_event(struct notifier_block *this,
+			     unsigned long event, void *ptr)
+{
+	int i, rc;
+
+	get_online_cpus();
+	on_each_cpu(iucv_block_cpu, NULL, 1);
+	preempt_disable();
+	for (i = 0; i < iucv_max_pathid; i++) {
+		if (iucv_path_table[i])
+			rc = iucv_sever_pathid(i, NULL);
+	}
+	preempt_enable();
+	put_online_cpus();
+	iucv_disable();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iucv_reboot_notifier = {
+	.notifier_call = iucv_reboot_event,
+};
+
 /**
  * iucv_path_accept
  * @path: address of iucv path structure
@@ -765,6 +856,10 @@ int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	/* Prepare parameter block. */
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
@@ -780,6 +875,7 @@ int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
 		path->msglim = parm->ctrl.ipmsglim;
 		path->flags = parm->ctrl.ipflags1;
 	}
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -809,6 +905,10 @@ int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
 
 	spin_lock_bh(&iucv_table_lock);
 	iucv_cleanup_queue();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->ctrl.ipmsglim = path->msglim;
@@ -843,6 +943,7 @@ int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
 			rc = -EIO;
 		}
 	}
+out:
 	spin_unlock_bh(&iucv_table_lock);
 	return rc;
 }
@@ -864,12 +965,17 @@ int iucv_path_quiesce(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (userdata)
 		memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
 	parm->ctrl.ippathid = path->pathid;
 	rc = iucv_call_b2f0(IUCV_QUIESCE, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -891,12 +997,17 @@ int iucv_path_resume(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (userdata)
 		memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
 	parm->ctrl.ippathid = path->pathid;
 	rc = iucv_call_b2f0(IUCV_RESUME, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -915,15 +1026,18 @@ int iucv_path_sever(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	preempt_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	if (iucv_active_cpu != smp_processor_id())
 		spin_lock_bh(&iucv_table_lock);
 	rc = iucv_sever_pathid(path->pathid, userdata);
-	if (!rc) {
-		iucv_path_table[path->pathid] = NULL;
-		list_del_init(&path->list);
-	}
+	iucv_path_table[path->pathid] = NULL;
+	list_del_init(&path->list);
 	if (iucv_active_cpu != smp_processor_id())
 		spin_unlock_bh(&iucv_table_lock);
+out:
 	preempt_enable();
 	return rc;
 }
@@ -946,6 +1060,10 @@ int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->purge.ippathid = path->pathid;
@@ -957,6 +1075,7 @@ int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
 		msg->audit = (*(u32 *) &parm->purge.ipaudit) >> 8;
 		msg->tag = parm->purge.ipmsgtag;
 	}
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1033,6 +1152,10 @@ int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
 	if (msg->flags & IUCV_IPRMDATA)
 		return iucv_message_receive_iprmdata(path, msg, flags,
 						     buffer, size, residual);
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->db.ipbfadr1 = (u32)(addr_t) buffer;
@@ -1048,6 +1171,7 @@ int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
 		if (residual)
 			*residual = parm->db.ipbfln1f;
 	}
+out:
 	return rc;
 }
 EXPORT_SYMBOL(__iucv_message_receive);
@@ -1101,6 +1225,10 @@ int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg)
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->db.ippathid = path->pathid;
@@ -1108,6 +1236,7 @@ int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg)
 	parm->db.iptrgcls = msg->class;
 	parm->db.ipflags1 = (IUCV_IPTRGCLS | IUCV_IPFGMID | IUCV_IPFGPID);
 	rc = iucv_call_b2f0(IUCV_REJECT, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1135,6 +1264,10 @@ int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (flags & IUCV_IPRMDATA) {
@@ -1152,6 +1285,7 @@ int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
 		parm->db.iptrgcls = msg->class;
 	}
 	rc = iucv_call_b2f0(IUCV_REPLY, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1180,6 +1314,10 @@ int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
 	union iucv_param *parm;
 	int rc;
 
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (flags & IUCV_IPRMDATA) {
@@ -1202,6 +1340,7 @@ int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
 	rc = iucv_call_b2f0(IUCV_SEND, parm);
 	if (!rc)
 		msg->id = parm->db.ipmsgid;
+out:
 	return rc;
 }
 EXPORT_SYMBOL(__iucv_message_send);
@@ -1262,6 +1401,10 @@ int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (flags & IUCV_IPRMDATA) {
@@ -1287,6 +1430,7 @@ int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
 	rc = iucv_call_b2f0(IUCV_SEND, parm);
 	if (!rc)
 		msg->id = parm->db.ipmsgid;
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1378,6 +1522,8 @@ static void iucv_path_complete(struct iucv_irq_data *data)
 	struct iucv_path_complete *ipc = (void *) data;
 	struct iucv_path *path = iucv_path_table[ipc->ippathid];
 
+	if (path)
+		path->flags = ipc->ipflags1;
 	if (path && path->handler && path->handler->path_complete)
 		path->handler->path_complete(path, ipc->ipuser);
 }
@@ -1413,7 +1559,7 @@ static void iucv_path_severed(struct iucv_irq_data *data)
 	else {
 		iucv_sever_pathid(path->pathid, NULL);
 		iucv_path_table[path->pathid] = NULL;
-		list_del_init(&path->list);
+		list_del(&path->list);
 		iucv_path_free(path);
 	}
 }
@@ -1675,6 +1821,130 @@ static void iucv_external_interrupt(u16 code)
 	spin_unlock(&iucv_queue_lock);
 }
 
+static int iucv_pm_prepare(struct device *dev)
+{
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_INFO "iucv_pm_prepare\n");
+#endif
+	if (dev->driver && dev->driver->pm && dev->driver->pm->prepare)
+		rc = dev->driver->pm->prepare(dev);
+	return rc;
+}
+
+static void iucv_pm_complete(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_INFO "iucv_pm_complete\n");
+#endif
+	if (dev->driver && dev->driver->pm && dev->driver->pm->complete)
+		dev->driver->pm->complete(dev);
+}
+
+/**
+ * iucv_path_table_empty() - determine if iucv path table is empty
+ *
+ * Returns 0 if there are still iucv pathes defined
+ *	   1 if there are no iucv pathes defined
+ */
+int iucv_path_table_empty(void)
+{
+	int i;
+
+	for (i = 0; i < iucv_max_pathid; i++) {
+		if (iucv_path_table[i])
+			return 0;
+	}
+	return 1;
+}
+
+/**
+ * iucv_pm_freeze() - Freeze PM callback
+ * @dev:	iucv-based device
+ *
+ * disable iucv interrupts
+ * invoke callback function of the iucv-based driver
+ * shut down iucv, if no iucv-pathes are established anymore
+ */
+static int iucv_pm_freeze(struct device *dev)
+{
+	int cpu;
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "iucv_pm_freeze\n");
+#endif
+	for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
+		smp_call_function_single(cpu, iucv_block_cpu_almost, NULL, 1);
+	if (dev->driver && dev->driver->pm && dev->driver->pm->freeze)
+		rc = dev->driver->pm->freeze(dev);
+	if (iucv_path_table_empty())
+		iucv_disable();
+	return rc;
+}
+
+/**
+ * iucv_pm_thaw() - Thaw PM callback
+ * @dev:	iucv-based device
+ *
+ * make iucv ready for use again: allocate path table, declare interrupt buffers
+ *				  and enable iucv interrupts
+ * invoke callback function of the iucv-based driver
+ */
+static int iucv_pm_thaw(struct device *dev)
+{
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "iucv_pm_thaw\n");
+#endif
+	if (!iucv_path_table) {
+		rc = iucv_enable();
+		if (rc)
+			goto out;
+	}
+	if (cpus_empty(iucv_irq_cpumask)) {
+		if (iucv_nonsmp_handler)
+			/* enable interrupts on one cpu */
+			iucv_allow_cpu(NULL);
+		else
+			/* enable interrupts on all cpus */
+			iucv_setmask_mp();
+	}
+	if (dev->driver && dev->driver->pm && dev->driver->pm->thaw)
+		rc = dev->driver->pm->thaw(dev);
+out:
+	return rc;
+}
+
+/**
+ * iucv_pm_restore() - Restore PM callback
+ * @dev:	iucv-based device
+ *
+ * make iucv ready for use again: allocate path table, declare interrupt buffers
+ *				  and enable iucv interrupts
+ * invoke callback function of the iucv-based driver
+ */
+static int iucv_pm_restore(struct device *dev)
+{
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "iucv_pm_restore %p\n", iucv_path_table);
+#endif
+	if (cpus_empty(iucv_irq_cpumask)) {
+		rc = iucv_query_maxconn();
+		rc = iucv_enable();
+		if (rc)
+			goto out;
+	}
+	if (dev->driver && dev->driver->pm && dev->driver->pm->restore)
+		rc = dev->driver->pm->restore(dev);
+out:
+	return rc;
+}
+
 /**
  * iucv_init
  *
@@ -1717,23 +1987,37 @@ static int __init iucv_init(void)
 			rc = -ENOMEM;
 			goto out_free;
 		}
+		iucv_param_irq[cpu] = kmalloc_node(sizeof(union iucv_param),
+				  GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+		if (!iucv_param_irq[cpu]) {
+			rc = -ENOMEM;
+			goto out_free;
+		}
+
 	}
 	rc = register_hotcpu_notifier(&iucv_cpu_notifier);
 	if (rc)
 		goto out_free;
+	rc = register_reboot_notifier(&iucv_reboot_notifier);
+	if (rc)
+		goto out_cpu;
 	ASCEBC(iucv_error_no_listener, 16);
 	ASCEBC(iucv_error_no_memory, 16);
 	ASCEBC(iucv_error_pathid, 16);
 	iucv_available = 1;
 	rc = bus_register(&iucv_bus);
 	if (rc)
-		goto out_cpu;
+		goto out_reboot;
 	return 0;
 
+out_reboot:
+	unregister_reboot_notifier(&iucv_reboot_notifier);
 out_cpu:
 	unregister_hotcpu_notifier(&iucv_cpu_notifier);
 out_free:
 	for_each_possible_cpu(cpu) {
+		kfree(iucv_param_irq[cpu]);
+		iucv_param_irq[cpu] = NULL;
 		kfree(iucv_param[cpu]);
 		iucv_param[cpu] = NULL;
 		kfree(iucv_irq_data[cpu]);
@@ -1762,8 +2046,11 @@ static void __exit iucv_exit(void)
 	list_for_each_entry_safe(p, n, &iucv_work_queue, list)
 		kfree(p);
 	spin_unlock_irq(&iucv_queue_lock);
+	unregister_reboot_notifier(&iucv_reboot_notifier);
 	unregister_hotcpu_notifier(&iucv_cpu_notifier);
 	for_each_possible_cpu(cpu) {
+		kfree(iucv_param_irq[cpu]);
+		iucv_param_irq[cpu] = NULL;
 		kfree(iucv_param[cpu]);
 		iucv_param[cpu] = NULL;
 		kfree(iucv_irq_data[cpu]);
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index febae702685..9208cf5f2bd 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -935,7 +935,7 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr,
 
 		if (llc->dev) {
 			sllc.sllc_arphrd = llc->dev->type;
-			memcpy(&sllc.sllc_mac, &llc->dev->dev_addr,
+			memcpy(&sllc.sllc_mac, llc->dev->dev_addr,
 			       IFHWADDRLEN);
 		}
 	}
diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c
index 3477624a490..c6bab39b018 100644
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -79,10 +79,6 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 
 	if (unlikely(!ev->ind_prim && !ev->cfm_prim)) {
 		/* indicate or confirm not required */
-		/* XXX this is not very pretty, perhaps we should store
-		 * XXX indicate/confirm-needed state in the llc_conn_state_ev
-		 * XXX control block of the SKB instead? -DaveM
-		 */
 		if (!skb->next)
 			goto out_kfree_skb;
 		goto out_skb_put;
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ecc3faf9f11..ba2643a43c7 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -1,16 +1,35 @@
 config MAC80211
 	tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
+	depends on CFG80211
 	select CRYPTO
 	select CRYPTO_ECB
 	select CRYPTO_ARC4
 	select CRYPTO_AES
 	select CRC32
 	select WIRELESS_EXT
-	select CFG80211
 	---help---
 	  This option enables the hardware independent IEEE 802.11
 	  networking stack.
 
+comment "CFG80211 needs to be enabled for MAC80211"
+	depends on CFG80211=n
+
+config MAC80211_DEFAULT_PS
+	bool "enable powersave by default"
+	depends on MAC80211
+	default y
+	help
+	  This option enables powersave mode by default.
+
+	  If this causes your applications to misbehave you should fix your
+	  applications instead -- they need to register their network
+	  latency requirement, see Documentation/power/pm_qos_interface.txt.
+
+config MAC80211_DEFAULT_PS_VALUE
+	int
+	default 1 if MAC80211_DEFAULT_PS
+	default 0
+
 menu "Rate control algorithm selection"
 	depends on MAC80211 != n
 
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 07656d830bc..bc064d7933f 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -16,12 +16,12 @@
 #include <linux/ieee80211.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 
 void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 				    u16 initiator, u16 reason)
 {
 	struct ieee80211_local *local = sta->local;
-	struct ieee80211_hw *hw = &local->hw;
 	int i;
 
 	/* check if TID is in operational state */
@@ -41,8 +41,8 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 	       sta->sta.addr, tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
-	if (local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_STOP,
-				     &sta->sta, tid, NULL))
+	if (drv_ampdu_action(local, IEEE80211_AMPDU_RX_STOP,
+			     &sta->sta, tid, NULL))
 		printk(KERN_DEBUG "HW problem - can not stop rx "
 				"aggregation for tid %d\n", tid);
 
@@ -68,6 +68,7 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 	spin_lock_bh(&sta->lock);
 	/* free resources */
 	kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_buf);
+	kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_time);
 
 	if (!sta->ampdu_mlme.tid_rx[tid]->shutdown) {
 		kfree(sta->ampdu_mlme.tid_rx[tid]);
@@ -268,19 +269,23 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	/* prepare reordering buffer */
 	tid_agg_rx->reorder_buf =
 		kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
-	if (!tid_agg_rx->reorder_buf) {
+	tid_agg_rx->reorder_time =
+		kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC);
+	if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		if (net_ratelimit())
 			printk(KERN_ERR "can not allocate reordering buffer "
 			       "to tid %d\n", tid);
 #endif
+		kfree(tid_agg_rx->reorder_buf);
+		kfree(tid_agg_rx->reorder_time);
 		kfree(sta->ampdu_mlme.tid_rx[tid]);
+		sta->ampdu_mlme.tid_rx[tid] = NULL;
 		goto end;
 	}
 
-	if (local->ops->ampdu_action)
-		ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
-					       &sta->sta, tid, &start_seq_num);
+	ret = drv_ampdu_action(local, IEEE80211_AMPDU_RX_START,
+			       &sta->sta, tid, &start_seq_num);
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 947aaaad35d..9e5762ad307 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -16,6 +16,7 @@
 #include <linux/ieee80211.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "wme.h"
 
 /**
@@ -131,11 +132,14 @@ static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 
 	state = &sta->ampdu_mlme.tid_state_tx[tid];
 
+	if (*state == HT_AGG_STATE_OPERATIONAL)
+		sta->ampdu_mlme.addba_req_num[tid] = 0;
+
 	*state = HT_AGG_STATE_REQ_STOP_BA_MSK |
 		(initiator << HT_AGG_STATE_INITIATOR_SHIFT);
 
-	ret = local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_STOP,
-				       &sta->sta, tid, NULL);
+	ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_STOP,
+			       &sta->sta, tid, NULL);
 
 	/* HW shall not deny going back to legacy */
 	if (WARN_ON(ret)) {
@@ -306,8 +310,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 
 	start_seq_num = sta->tid_seq[tid];
 
-	ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
-				       &sta->sta, tid, &start_seq_num);
+	ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_START,
+			       &sta->sta, tid, &start_seq_num);
 
 	if (ret) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -336,6 +340,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 			 sta->ampdu_mlme.tid_tx[tid]->dialog_token,
 			 sta->ampdu_mlme.tid_tx[tid]->ssn,
 			 0x40, 5000);
+	sta->ampdu_mlme.addba_req_num[tid]++;
 	/* activate the timer for the recipient's addBA response */
 	sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires =
 				jiffies + ADDBA_RESP_INTERVAL;
@@ -418,8 +423,8 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 	ieee80211_agg_splice_finish(local, sta, tid);
 	spin_unlock(&local->ampdu_lock);
 
-	local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_OPERATIONAL,
-				 &sta->sta, tid, NULL);
+	drv_ampdu_action(local, IEEE80211_AMPDU_TX_OPERATIONAL,
+			 &sta->sta, tid, NULL);
 }
 
 void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
@@ -605,7 +610,6 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
 
 	*state = HT_AGG_STATE_IDLE;
 	/* from now on packets are no longer put onto sta->pending */
-	sta->ampdu_mlme.addba_req_num[tid] = 0;
 	kfree(sta->ampdu_mlme.tid_tx[tid]);
 	sta->ampdu_mlme.tid_tx[tid] = NULL;
 
@@ -688,7 +692,6 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 
 		sta->ampdu_mlme.addba_req_num[tid] = 0;
 	} else {
-		sta->ampdu_mlme.addba_req_num[tid]++;
 		___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
 	}
 	spin_unlock_bh(&sta->lock);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index e677b751d46..3f47276caeb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -13,6 +13,7 @@
 #include <linux/rcupdate.h>
 #include <net/cfg80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "cfg.h"
 #include "rate.h"
 #include "mesh.h"
@@ -111,7 +112,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 }
 
 static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
-			     u8 key_idx, u8 *mac_addr,
+			     u8 key_idx, const u8 *mac_addr,
 			     struct key_params *params)
 {
 	struct ieee80211_sub_if_data *sdata;
@@ -140,7 +141,8 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 		return -EINVAL;
 	}
 
-	key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key);
+	key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key,
+				  params->seq_len, params->seq);
 	if (!key)
 		return -ENOMEM;
 
@@ -165,7 +167,7 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
-			     u8 key_idx, u8 *mac_addr)
+			     u8 key_idx, const u8 *mac_addr)
 {
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
@@ -207,7 +209,7 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
-			     u8 key_idx, u8 *mac_addr, void *cookie,
+			     u8 key_idx, const u8 *mac_addr, void *cookie,
 			     void (*callback)(void *cookie,
 					      struct key_params *params))
 {
@@ -245,12 +247,10 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 		iv32 = key->u.tkip.tx.iv32;
 		iv16 = key->u.tkip.tx.iv16;
 
-		if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
-		    sdata->local->ops->get_tkip_seq)
-			sdata->local->ops->get_tkip_seq(
-				local_to_hw(sdata->local),
-				key->conf.hw_key_idx,
-				&iv32, &iv16);
+		if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
+			drv_get_tkip_seq(sdata->local,
+					 key->conf.hw_key_idx,
+					 &iv32, &iv16);
 
 		seq[0] = iv16 & 0xff;
 		seq[1] = (iv16 >> 8) & 0xff;
@@ -451,18 +451,11 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 	 * This is a kludge. beacon interval should really be part
 	 * of the beacon information.
 	 */
-	if (params->interval && (sdata->local->hw.conf.beacon_int !=
-				 params->interval)) {
-		sdata->local->hw.conf.beacon_int = params->interval;
-		err = ieee80211_hw_config(sdata->local,
-					IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
-		if (err < 0)
-			return err;
-		/*
-		 * We updated some parameter so if below bails out
-		 * it's not an error.
-		 */
-		err = 0;
+	if (params->interval &&
+	    (sdata->vif.bss_conf.beacon_int != params->interval)) {
+		sdata->vif.bss_conf.beacon_int = params->interval;
+		ieee80211_bss_info_change_notify(sdata,
+						 BSS_CHANGED_BEACON_INT);
 	}
 
 	/* Need to have a beacon head if we don't have one yet */
@@ -528,8 +521,9 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 
 	kfree(old);
 
-	return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
-					  IEEE80211_IFCC_BEACON_ENABLED);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
+						BSS_CHANGED_BEACON);
+	return 0;
 }
 
 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
@@ -580,7 +574,8 @@ static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 	synchronize_rcu();
 	kfree(old);
 
-	return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+	return 0;
 }
 
 /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
@@ -635,34 +630,45 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	int i, j;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	u32 mask, set;
 
 	sband = local->hw.wiphy->bands[local->oper_channel->band];
 
-	/*
-	 * FIXME: updating the flags is racy when this function is
-	 *	  called from ieee80211_change_station(), this will
-	 *	  be resolved in a future patch.
-	 */
+	spin_lock_bh(&sta->lock);
+	mask = params->sta_flags_mask;
+	set = params->sta_flags_set;
 
-	if (params->station_flags & STATION_FLAG_CHANGED) {
-		spin_lock_bh(&sta->lock);
+	if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
 		sta->flags &= ~WLAN_STA_AUTHORIZED;
-		if (params->station_flags & STATION_FLAG_AUTHORIZED)
+		if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
 			sta->flags |= WLAN_STA_AUTHORIZED;
+	}
 
+	if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
 		sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
-		if (params->station_flags & STATION_FLAG_SHORT_PREAMBLE)
+		if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
 			sta->flags |= WLAN_STA_SHORT_PREAMBLE;
+	}
 
+	if (mask & BIT(NL80211_STA_FLAG_WME)) {
 		sta->flags &= ~WLAN_STA_WME;
-		if (params->station_flags & STATION_FLAG_WME)
+		if (set & BIT(NL80211_STA_FLAG_WME))
 			sta->flags |= WLAN_STA_WME;
+	}
 
+	if (mask & BIT(NL80211_STA_FLAG_MFP)) {
 		sta->flags &= ~WLAN_STA_MFP;
-		if (params->station_flags & STATION_FLAG_MFP)
+		if (set & BIT(NL80211_STA_FLAG_MFP))
 			sta->flags |= WLAN_STA_MFP;
-		spin_unlock_bh(&sta->lock);
 	}
+	spin_unlock_bh(&sta->lock);
+
+	/*
+	 * cfg80211 validates this (1-2007) and allows setting the AID
+	 * only when creating a new station entry
+	 */
+	if (params->aid)
+		sta->sta.aid = params->aid;
 
 	/*
 	 * FIXME: updating the following information is racy when this
@@ -671,12 +677,6 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	 *	  maybe we should just reject attemps to change it.
 	 */
 
-	if (params->aid) {
-		sta->sta.aid = params->aid;
-		if (sta->sta.aid > IEEE80211_MAX_AID)
-			sta->sta.aid = 0; /* XXX: should this be an error? */
-	}
-
 	if (params->listen_interval >= 0)
 		sta->listen_interval = params->listen_interval;
 
@@ -1120,10 +1120,10 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
 	p.cw_max = params->cwmax;
 	p.cw_min = params->cwmin;
 	p.txop = params->txop;
-	if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) {
+	if (drv_conf_tx(local, params->queue, &p)) {
 		printk(KERN_DEBUG "%s: failed to set TX queue "
-		       "parameters for queue %d\n", local->mdev->name,
-		       params->queue);
+		       "parameters for queue %d\n",
+		       wiphy_name(local->hw.wiphy), params->queue);
 		return -EINVAL;
 	}
 
@@ -1167,7 +1167,8 @@ static int ieee80211_scan(struct wiphy *wiphy,
 
 	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
 	    sdata->vif.type != NL80211_IFTYPE_ADHOC &&
-	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
+	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+	    (sdata->vif.type != NL80211_IFTYPE_AP || sdata->u.ap.beacon))
 		return -EOPNOTSUPP;
 
 	return ieee80211_request_scan(sdata, req);
@@ -1255,9 +1256,22 @@ static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
 		sdata->u.mgd.flags |= IEEE80211_STA_AUTO_SSID_SEL;
 
 	ret = ieee80211_sta_set_extra_ie(sdata, req->ie, req->ie_len);
-	if (ret)
+	if (ret && ret != -EALREADY)
 		return ret;
 
+	if (req->use_mfp) {
+		sdata->u.mgd.mfp = IEEE80211_MFP_REQUIRED;
+		sdata->u.mgd.flags |= IEEE80211_STA_MFP_ENABLED;
+	} else {
+		sdata->u.mgd.mfp = IEEE80211_MFP_DISABLED;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_MFP_ENABLED;
+	}
+
+	if (req->control_port)
+		sdata->u.mgd.flags |= IEEE80211_STA_CONTROL_PORT;
+	else
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
+
 	sdata->u.mgd.flags |= IEEE80211_STA_EXT_SME;
 	sdata->u.mgd.state = IEEE80211_STA_MLME_ASSOCIATE;
 	ieee80211_sta_req_auth(sdata);
@@ -1267,25 +1281,106 @@ static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
 			    struct cfg80211_deauth_request *req)
 {
-	struct ieee80211_sub_if_data *sdata;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	/* TODO: req->ie */
+	/* TODO: req->ie, req->peer_addr */
 	return ieee80211_sta_deauthenticate(sdata, req->reason_code);
 }
 
 static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
 			      struct cfg80211_disassoc_request *req)
 {
-	struct ieee80211_sub_if_data *sdata;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	/* TODO: req->ie */
+	/* TODO: req->ie, req->peer_addr */
 	return ieee80211_sta_disassociate(sdata, req->reason_code);
 }
 
+static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+			       struct cfg80211_ibss_params *params)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	return ieee80211_ibss_join(sdata, params);
+}
+
+static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	return ieee80211_ibss_leave(sdata);
+}
+
+static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	int err;
+
+	if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+		err = drv_set_rts_threshold(local, wiphy->rts_threshold);
+
+		if (err)
+			return err;
+	}
+
+	if (changed & WIPHY_PARAM_RETRY_SHORT)
+		local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
+	if (changed & WIPHY_PARAM_RETRY_LONG)
+		local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+	if (changed &
+	    (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
+
+	return 0;
+}
+
+static int ieee80211_set_tx_power(struct wiphy *wiphy,
+				  enum tx_power_setting type, int dbm)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_channel *chan = local->hw.conf.channel;
+	u32 changes = 0;
+
+	switch (type) {
+	case TX_POWER_AUTOMATIC:
+		local->user_power_level = -1;
+		break;
+	case TX_POWER_LIMITED:
+		if (dbm < 0)
+			return -EINVAL;
+		local->user_power_level = dbm;
+		break;
+	case TX_POWER_FIXED:
+		if (dbm < 0)
+			return -EINVAL;
+		/* TODO: move to cfg80211 when it knows the channel */
+		if (dbm > chan->max_power)
+			return -EINVAL;
+		local->user_power_level = dbm;
+		break;
+	}
+
+	ieee80211_hw_config(local, changes);
+
+	return 0;
+}
+
+static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	*dbm = local->hw.conf.power_level;
+
+	return 0;
+}
+
+static void ieee80211_rfkill_poll(struct wiphy *wiphy)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	drv_rfkill_poll(local);
+}
+
 struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
@@ -1322,4 +1417,10 @@ struct cfg80211_ops mac80211_config_ops = {
 	.assoc = ieee80211_assoc,
 	.deauth = ieee80211_deauth,
 	.disassoc = ieee80211_disassoc,
+	.join_ibss = ieee80211_join_ibss,
+	.leave_ibss = ieee80211_leave_ibss,
+	.set_wiphy_params = ieee80211_set_wiphy_params,
+	.set_tx_power = ieee80211_set_tx_power,
+	.get_tx_power = ieee80211_get_tx_power,
+	.rfkill_poll = ieee80211_rfkill_poll,
 };
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 210b9b6fecd..11c72311f35 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/rtnetlink.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "debugfs.h"
 
@@ -51,14 +52,6 @@ static const struct file_operations name## _ops = {			\
 
 DEBUGFS_READONLY_FILE(frequency, 20, "%d",
 		      local->hw.conf.channel->center_freq);
-DEBUGFS_READONLY_FILE(rts_threshold, 20, "%d",
-		      local->rts_threshold);
-DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
-		      local->fragmentation_threshold);
-DEBUGFS_READONLY_FILE(short_retry_limit, 20, "%d",
-		      local->hw.conf.short_frame_max_tx_count);
-DEBUGFS_READONLY_FILE(long_retry_limit, 20, "%d",
-		      local->hw.conf.long_frame_max_tx_count);
 DEBUGFS_READONLY_FILE(total_ps_buffered, 20, "%d",
 		      local->total_ps_buffered);
 DEBUGFS_READONLY_FILE(wep_iv, 20, "%#08x",
@@ -70,11 +63,10 @@ static ssize_t tsf_read(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
 	struct ieee80211_local *local = file->private_data;
-	u64 tsf = 0;
+	u64 tsf;
 	char buf[100];
 
-	if (local->ops->get_tsf)
-		tsf = local->ops->get_tsf(local_to_hw(local));
+	tsf = drv_get_tsf(local);
 
 	snprintf(buf, sizeof(buf), "0x%016llx\n", (unsigned long long) tsf);
 
@@ -97,13 +89,13 @@ static ssize_t tsf_write(struct file *file,
 
 	if (strncmp(buf, "reset", 5) == 0) {
 		if (local->ops->reset_tsf) {
-			local->ops->reset_tsf(local_to_hw(local));
+			drv_reset_tsf(local);
 			printk(KERN_INFO "%s: debugfs reset TSF\n", wiphy_name(local->hw.wiphy));
 		}
 	} else {
 		tsf = simple_strtoul(buf, NULL, 0);
 		if (local->ops->set_tsf) {
-			local->ops->set_tsf(local_to_hw(local), tsf);
+			drv_set_tsf(local, tsf);
 			printk(KERN_INFO "%s: debugfs set TSF to %#018llx\n", wiphy_name(local->hw.wiphy), tsf);
 		}
 	}
@@ -135,6 +127,42 @@ static const struct file_operations reset_ops = {
 	.open = mac80211_open_file_generic,
 };
 
+static ssize_t noack_read(struct file *file, char __user *user_buf,
+			  size_t count, loff_t *ppos)
+{
+	struct ieee80211_local *local = file->private_data;
+	int res;
+	char buf[10];
+
+	res = scnprintf(buf, sizeof(buf), "%d\n", local->wifi_wme_noack_test);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static ssize_t noack_write(struct file *file,
+			   const char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	struct ieee80211_local *local = file->private_data;
+	char buf[10];
+	size_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+
+	local->wifi_wme_noack_test = !!simple_strtoul(buf, NULL, 0);
+
+	return count;
+}
+
+static const struct file_operations noack_ops = {
+	.read = noack_read,
+	.write = noack_write,
+	.open = mac80211_open_file_generic
+};
+
 /* statistics stuff */
 
 #define DEBUGFS_STATS_FILE(name, buflen, fmt, value...)			\
@@ -150,14 +178,12 @@ static ssize_t format_devstat_counter(struct ieee80211_local *local,
 	char buf[20];
 	int res;
 
-	if (!local->ops->get_stats)
-		return -EOPNOTSUPP;
-
 	rtnl_lock();
-	res = local->ops->get_stats(local_to_hw(local), &stats);
+	res = drv_get_stats(local, &stats);
 	rtnl_unlock();
-	if (!res)
-		res = printvalue(&stats, buf, sizeof(buf));
+	if (res)
+		return res;
+	res = printvalue(&stats, buf, sizeof(buf));
 	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
 }
 
@@ -269,14 +295,11 @@ void debugfs_hw_add(struct ieee80211_local *local)
 	local->debugfs.keys = debugfs_create_dir("keys", phyd);
 
 	DEBUGFS_ADD(frequency);
-	DEBUGFS_ADD(rts_threshold);
-	DEBUGFS_ADD(fragmentation_threshold);
-	DEBUGFS_ADD(short_retry_limit);
-	DEBUGFS_ADD(long_retry_limit);
 	DEBUGFS_ADD(total_ps_buffered);
 	DEBUGFS_ADD(wep_iv);
 	DEBUGFS_ADD(tsf);
 	DEBUGFS_ADD_MODE(reset, 0200);
+	DEBUGFS_ADD(noack);
 
 	statsd = debugfs_create_dir("statistics", phyd);
 	local->debugfs.statistics = statsd;
@@ -324,14 +347,11 @@ void debugfs_hw_add(struct ieee80211_local *local)
 void debugfs_hw_del(struct ieee80211_local *local)
 {
 	DEBUGFS_DEL(frequency);
-	DEBUGFS_DEL(rts_threshold);
-	DEBUGFS_DEL(fragmentation_threshold);
-	DEBUGFS_DEL(short_retry_limit);
-	DEBUGFS_DEL(long_retry_limit);
 	DEBUGFS_DEL(total_ps_buffered);
 	DEBUGFS_DEL(wep_iv);
 	DEBUGFS_DEL(tsf);
 	DEBUGFS_DEL(reset);
+	DEBUGFS_DEL(noack);
 
 	DEBUGFS_STATS_DEL(transmitted_fragment_count);
 	DEBUGFS_STATS_DEL(multicast_transmitted_frame_count);
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
new file mode 100644
index 00000000000..b13446afd48
--- /dev/null
+++ b/net/mac80211/driver-ops.h
@@ -0,0 +1,191 @@
+#ifndef __MAC80211_DRIVER_OPS
+#define __MAC80211_DRIVER_OPS
+
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+static inline int drv_tx(struct ieee80211_local *local, struct sk_buff *skb)
+{
+	return local->ops->tx(&local->hw, skb);
+}
+
+static inline int drv_start(struct ieee80211_local *local)
+{
+	return local->ops->start(&local->hw);
+}
+
+static inline void drv_stop(struct ieee80211_local *local)
+{
+	local->ops->stop(&local->hw);
+}
+
+static inline int drv_add_interface(struct ieee80211_local *local,
+				    struct ieee80211_if_init_conf *conf)
+{
+	return local->ops->add_interface(&local->hw, conf);
+}
+
+static inline void drv_remove_interface(struct ieee80211_local *local,
+					struct ieee80211_if_init_conf *conf)
+{
+	local->ops->remove_interface(&local->hw, conf);
+}
+
+static inline int drv_config(struct ieee80211_local *local, u32 changed)
+{
+	return local->ops->config(&local->hw, changed);
+}
+
+static inline void drv_bss_info_changed(struct ieee80211_local *local,
+					struct ieee80211_vif *vif,
+					struct ieee80211_bss_conf *info,
+					u32 changed)
+{
+	if (local->ops->bss_info_changed)
+		local->ops->bss_info_changed(&local->hw, vif, info, changed);
+}
+
+static inline void drv_configure_filter(struct ieee80211_local *local,
+					unsigned int changed_flags,
+					unsigned int *total_flags,
+					int mc_count,
+					struct dev_addr_list *mc_list)
+{
+	local->ops->configure_filter(&local->hw, changed_flags, total_flags,
+				     mc_count, mc_list);
+}
+
+static inline int drv_set_tim(struct ieee80211_local *local,
+			      struct ieee80211_sta *sta, bool set)
+{
+	if (local->ops->set_tim)
+		return local->ops->set_tim(&local->hw, sta, set);
+	return 0;
+}
+
+static inline int drv_set_key(struct ieee80211_local *local,
+			      enum set_key_cmd cmd, struct ieee80211_vif *vif,
+			      struct ieee80211_sta *sta,
+			      struct ieee80211_key_conf *key)
+{
+	return local->ops->set_key(&local->hw, cmd, vif, sta, key);
+}
+
+static inline void drv_update_tkip_key(struct ieee80211_local *local,
+				       struct ieee80211_key_conf *conf,
+				       const u8 *address, u32 iv32,
+				       u16 *phase1key)
+{
+	if (local->ops->update_tkip_key)
+		local->ops->update_tkip_key(&local->hw, conf, address,
+					    iv32, phase1key);
+}
+
+static inline int drv_hw_scan(struct ieee80211_local *local,
+			      struct cfg80211_scan_request *req)
+{
+	return local->ops->hw_scan(&local->hw, req);
+}
+
+static inline void drv_sw_scan_start(struct ieee80211_local *local)
+{
+	if (local->ops->sw_scan_start)
+		local->ops->sw_scan_start(&local->hw);
+}
+
+static inline void drv_sw_scan_complete(struct ieee80211_local *local)
+{
+	if (local->ops->sw_scan_complete)
+		local->ops->sw_scan_complete(&local->hw);
+}
+
+static inline int drv_get_stats(struct ieee80211_local *local,
+				struct ieee80211_low_level_stats *stats)
+{
+	if (!local->ops->get_stats)
+		return -EOPNOTSUPP;
+	return local->ops->get_stats(&local->hw, stats);
+}
+
+static inline void drv_get_tkip_seq(struct ieee80211_local *local,
+				    u8 hw_key_idx, u32 *iv32, u16 *iv16)
+{
+	if (local->ops->get_tkip_seq)
+		local->ops->get_tkip_seq(&local->hw, hw_key_idx, iv32, iv16);
+}
+
+static inline int drv_set_rts_threshold(struct ieee80211_local *local,
+					u32 value)
+{
+	if (local->ops->set_rts_threshold)
+		return local->ops->set_rts_threshold(&local->hw, value);
+	return 0;
+}
+
+static inline void drv_sta_notify(struct ieee80211_local *local,
+				  struct ieee80211_vif *vif,
+				  enum sta_notify_cmd cmd,
+				  struct ieee80211_sta *sta)
+{
+	if (local->ops->sta_notify)
+		local->ops->sta_notify(&local->hw, vif, cmd, sta);
+}
+
+static inline int drv_conf_tx(struct ieee80211_local *local, u16 queue,
+			      const struct ieee80211_tx_queue_params *params)
+{
+	if (local->ops->conf_tx)
+		return local->ops->conf_tx(&local->hw, queue, params);
+	return -EOPNOTSUPP;
+}
+
+static inline int drv_get_tx_stats(struct ieee80211_local *local,
+				   struct ieee80211_tx_queue_stats *stats)
+{
+	return local->ops->get_tx_stats(&local->hw, stats);
+}
+
+static inline u64 drv_get_tsf(struct ieee80211_local *local)
+{
+	if (local->ops->get_tsf)
+		return local->ops->get_tsf(&local->hw);
+	return -1ULL;
+}
+
+static inline void drv_set_tsf(struct ieee80211_local *local, u64 tsf)
+{
+	if (local->ops->set_tsf)
+		local->ops->set_tsf(&local->hw, tsf);
+}
+
+static inline void drv_reset_tsf(struct ieee80211_local *local)
+{
+	if (local->ops->reset_tsf)
+		local->ops->reset_tsf(&local->hw);
+}
+
+static inline int drv_tx_last_beacon(struct ieee80211_local *local)
+{
+	if (local->ops->tx_last_beacon)
+		return local->ops->tx_last_beacon(&local->hw);
+	return 1;
+}
+
+static inline int drv_ampdu_action(struct ieee80211_local *local,
+				   enum ieee80211_ampdu_mlme_action action,
+				   struct ieee80211_sta *sta, u16 tid,
+				   u16 *ssn)
+{
+	if (local->ops->ampdu_action)
+		return local->ops->ampdu_action(&local->hw, action,
+						sta, tid, ssn);
+	return -EOPNOTSUPP;
+}
+
+
+static inline void drv_rfkill_poll(struct ieee80211_local *local)
+{
+	if (local->ops->rfkill_poll)
+		local->ops->rfkill_poll(&local->hw);
+}
+#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/event.c b/net/mac80211/event.c
index 0d95561c0ee..f288d01a634 100644
--- a/net/mac80211/event.c
+++ b/net/mac80211/event.c
@@ -12,12 +12,12 @@
 #include "ieee80211_i.h"
 
 /*
- * indicate a failed Michael MIC to userspace; the passed packet
- * (in the variable hdr) must be long enough to extract the TKIP
- * fields like TSC
+ * Indicate a failed Michael MIC to userspace. If the caller knows the TSC of
+ * the frame that generated the MIC failure (i.e., if it was provided by the
+ * driver or is still in the frame), it should provide that information.
  */
 void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
-				     struct ieee80211_hdr *hdr)
+				     struct ieee80211_hdr *hdr, const u8 *tsc)
 {
 	union iwreq_data wrqu;
 	char *buf = kmalloc(128, GFP_ATOMIC);
@@ -34,8 +34,9 @@ void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int ke
 		kfree(buf);
 	}
 
-	/*
-	 * TODO: re-add support for sending MIC failure indication
-	 * with all info via nl80211
-	 */
+	cfg80211_michael_mic_failure(sdata->dev, hdr->addr2,
+				     (hdr->addr1[0] & 0x01) ?
+				     NL80211_KEYTYPE_GROUP :
+				     NL80211_KEYTYPE_PAIRWISE,
+				     keyidx, tsc);
 }
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 4e3c72f20de..0891bfb0699 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/ieee80211.h>
-#include <net/wireless.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "rate.h"
@@ -83,89 +82,6 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
 		ht_cap->mcs.rx_mask[32/8] |= 1;
 }
 
-/*
- * ieee80211_enable_ht should be called only after the operating band
- * has been determined as ht configuration depends on the hw's
- * HT abilities for a specific band.
- */
-u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
-			struct ieee80211_ht_info *hti,
-			u16 ap_ht_cap_flags)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-	struct ieee80211_bss_ht_conf ht;
-	struct sta_info *sta;
-	u32 changed = 0;
-	bool enable_ht = true, ht_changed;
-	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
-
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	memset(&ht, 0, sizeof(ht));
-
-	/* HT is not supported */
-	if (!sband->ht_cap.ht_supported)
-		enable_ht = false;
-
-	/* check that channel matches the right operating channel */
-	if (local->hw.conf.channel->center_freq !=
-	    ieee80211_channel_to_frequency(hti->control_chan))
-		enable_ht = false;
-
-	if (enable_ht) {
-		channel_type = NL80211_CHAN_HT20;
-
-		if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
-		    (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
-		    (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
-			switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
-			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-				channel_type = NL80211_CHAN_HT40PLUS;
-				break;
-			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-				channel_type = NL80211_CHAN_HT40MINUS;
-				break;
-			}
-		}
-	}
-
-	ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
-		     channel_type != local->hw.conf.channel_type;
-
-	local->oper_channel_type = channel_type;
-
-	if (ht_changed) {
-                /* channel_type change automatically detected */
-		ieee80211_hw_config(local, 0);
-
-		rcu_read_lock();
-
-		sta = sta_info_get(local, ifmgd->bssid);
-		if (sta)
-			rate_control_rate_update(local, sband, sta,
-						 IEEE80211_RC_HT_CHANGED);
-
-		rcu_read_unlock();
-
-        }
-
-	/* disable HT */
-	if (!enable_ht)
-		return 0;
-
-	ht.operation_mode = le16_to_cpu(hti->operation_mode);
-
-	/* if bss configuration changed store the new one */
-	if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
-		changed |= BSS_CHANGED_HT;
-		sdata->vif.bss_conf.ht = ht;
-	}
-
-	return changed;
-}
-
 void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta)
 {
 	int i;
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 3201e1f9636..0b30277eb36 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -22,6 +22,7 @@
 #include <asm/unaligned.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 
 #define IEEE80211_SCAN_INTERVAL (2 * HZ)
@@ -59,74 +60,65 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata,
 				    sdata->u.ibss.bssid, 0);
 }
 
-static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
-				     const u8 *bssid, const int beacon_int,
-				     const int freq,
-				     const size_t supp_rates_len,
-				     const u8 *supp_rates,
-				     const u16 capability, u64 tsf)
+static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
+				      const u8 *bssid, const int beacon_int,
+				      struct ieee80211_channel *chan,
+				      const u32 basic_rates,
+				      const u16 capability, u64 tsf)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
-	int res = 0, rates, i, j;
+	int rates, i;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos;
 	struct ieee80211_supported_band *sband;
-	union iwreq_data wrqu;
+	u32 bss_change;
+	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
 
-	if (local->ops->reset_tsf) {
-		/* Reset own TSF to allow time synchronization work. */
-		local->ops->reset_tsf(local_to_hw(local));
-	}
+	/* Reset own TSF to allow time synchronization work. */
+	drv_reset_tsf(local);
 
-	if ((ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET) &&
-	   memcmp(ifibss->bssid, bssid, ETH_ALEN) == 0)
-		return res;
+	skb = ifibss->skb;
+	rcu_assign_pointer(ifibss->presp, NULL);
+	synchronize_rcu();
+	skb->data = skb->head;
+	skb->len = 0;
+	skb_reset_tail_pointer(skb);
+	skb_reserve(skb, sdata->local->hw.extra_tx_headroom);
 
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
-	if (!skb) {
-		printk(KERN_DEBUG "%s: failed to allocate buffer for probe "
-		       "response\n", sdata->dev->name);
-		return -ENOMEM;
-	}
-
-	if (!(ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET)) {
-		/* Remove possible STA entries from other IBSS networks. */
-		sta_info_flush_delayed(sdata);
-	}
+	if (memcmp(ifibss->bssid, bssid, ETH_ALEN))
+		sta_info_flush(sdata->local, sdata);
 
 	memcpy(ifibss->bssid, bssid, ETH_ALEN);
-	res = ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
-	if (res)
-		return res;
-
-	local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10;
 
-	sdata->drop_unencrypted = capability &
-		WLAN_CAPABILITY_PRIVACY ? 1 : 0;
+	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
-	res = ieee80211_set_freq(sdata, freq);
+	local->oper_channel = chan;
+	local->oper_channel_type = NL80211_CHAN_NO_HT;
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 
-	if (res)
-		return res;
+	sband = local->hw.wiphy->bands[chan->band];
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+	/* build supported rates array */
+	pos = supp_rates;
+	for (i = 0; i < sband->n_bitrates; i++) {
+		int rate = sband->bitrates[i].bitrate;
+		u8 basic = 0;
+		if (basic_rates & BIT(i))
+			basic = 0x80;
+		*pos++ = basic | (u8) (rate / 5);
+	}
 
 	/* Build IBSS probe response */
-
-	skb_reserve(skb, local->hw.extra_tx_headroom);
-
-	mgmt = (struct ieee80211_mgmt *)
-		skb_put(skb, 24 + sizeof(mgmt->u.beacon));
+	mgmt = (void *) skb_put(skb, 24 + sizeof(mgmt->u.beacon));
 	memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 					  IEEE80211_STYPE_PROBE_RESP);
 	memset(mgmt->da, 0xff, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN);
-	mgmt->u.beacon.beacon_int =
-		cpu_to_le16(local->hw.conf.beacon_int);
+	mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int);
 	mgmt->u.beacon.timestamp = cpu_to_le64(tsf);
 	mgmt->u.beacon.capab_info = cpu_to_le16(capability);
 
@@ -135,7 +127,7 @@ static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	*pos++ = ifibss->ssid_len;
 	memcpy(pos, ifibss->ssid, ifibss->ssid_len);
 
-	rates = supp_rates_len;
+	rates = sband->n_bitrates;
 	if (rates > 8)
 		rates = 8;
 	pos = skb_put(skb, 2 + rates);
@@ -147,7 +139,7 @@ static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 		pos = skb_put(skb, 2 + 1);
 		*pos++ = WLAN_EID_DS_PARAMS;
 		*pos++ = 1;
-		*pos++ = ieee80211_frequency_to_channel(freq);
+		*pos++ = ieee80211_frequency_to_channel(chan->center_freq);
 	}
 
 	pos = skb_put(skb, 2 + 2);
@@ -157,51 +149,73 @@ static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	*pos++ = 0;
 	*pos++ = 0;
 
-	if (supp_rates_len > 8) {
-		rates = supp_rates_len - 8;
+	if (sband->n_bitrates > 8) {
+		rates = sband->n_bitrates - 8;
 		pos = skb_put(skb, 2 + rates);
 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
 		*pos++ = rates;
 		memcpy(pos, &supp_rates[8], rates);
 	}
 
-	ifibss->probe_resp = skb;
+	if (ifibss->ie_len)
+		memcpy(skb_put(skb, ifibss->ie_len),
+		       ifibss->ie, ifibss->ie_len);
 
-	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
-				   IEEE80211_IFCC_BEACON_ENABLED);
+	rcu_assign_pointer(ifibss->presp, skb);
 
+	sdata->vif.bss_conf.beacon_int = beacon_int;
+	bss_change = BSS_CHANGED_BEACON_INT;
+	bss_change |= ieee80211_reset_erp_info(sdata);
+	bss_change |= BSS_CHANGED_BSSID;
+	bss_change |= BSS_CHANGED_BEACON;
+	bss_change |= BSS_CHANGED_BEACON_ENABLED;
+	ieee80211_bss_info_change_notify(sdata, bss_change);
 
-	rates = 0;
-	for (i = 0; i < supp_rates_len; i++) {
-		int bitrate = (supp_rates[i] & 0x7f) * 5;
-		for (j = 0; j < sband->n_bitrates; j++)
-			if (sband->bitrates[j].bitrate == bitrate)
-				rates |= BIT(j);
-	}
+	ieee80211_sta_def_wmm_params(sdata, sband->n_bitrates, supp_rates);
 
-	ieee80211_sta_def_wmm_params(sdata, supp_rates_len, supp_rates);
-
-	ifibss->flags |= IEEE80211_IBSS_PREV_BSSID_SET;
 	ifibss->state = IEEE80211_IBSS_MLME_JOINED;
-	mod_timer(&ifibss->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
-
-	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
-	wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL);
+	mod_timer(&ifibss->timer,
+		  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
 
-	return res;
+	cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
+				  mgmt, skb->len, 0, GFP_KERNEL);
+	cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL);
 }
 
-static int ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
-				   struct ieee80211_bss *bss)
+static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
+				    struct ieee80211_bss *bss)
 {
-	return __ieee80211_sta_join_ibss(sdata,
-					 bss->cbss.bssid,
-					 bss->cbss.beacon_interval,
-					 bss->cbss.channel->center_freq,
-					 bss->supp_rates_len, bss->supp_rates,
-					 bss->cbss.capability,
-					 bss->cbss.tsf);
+	struct ieee80211_supported_band *sband;
+	u32 basic_rates;
+	int i, j;
+	u16 beacon_int = bss->cbss.beacon_interval;
+
+	if (beacon_int < 10)
+		beacon_int = 10;
+
+	sband = sdata->local->hw.wiphy->bands[bss->cbss.channel->band];
+
+	basic_rates = 0;
+
+	for (i = 0; i < bss->supp_rates_len; i++) {
+		int rate = (bss->supp_rates[i] & 0x7f) * 5;
+		bool is_basic = !!(bss->supp_rates[i] & 0x80);
+
+		for (j = 0; j < sband->n_bitrates; j++) {
+			if (sband->bitrates[j].bitrate == rate) {
+				if (is_basic)
+					basic_rates |= BIT(j);
+				break;
+			}
+		}
+	}
+
+	__ieee80211_sta_join_ibss(sdata, bss->cbss.bssid,
+				  beacon_int,
+				  bss->cbss.channel,
+				  basic_rates,
+				  bss->cbss.capability,
+				  bss->cbss.tsf);
 }
 
 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
@@ -277,7 +291,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 		goto put_bss;
 
 	/* we use a fixed BSSID */
-	if (sdata->u.ibss.flags & IEEE80211_IBSS_BSSID_SET)
+	if (sdata->u.ibss.bssid)
 		goto put_bss;
 
 	/* not an IBSS */
@@ -322,12 +336,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 				bitrates[rx_status->rate_idx].bitrate;
 
 		rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate);
-	} else if (local && local->ops && local->ops->get_tsf)
-		/* second best option: get current TSF */
-		rx_timestamp = local->ops->get_tsf(local_to_hw(local));
-	else
-		/* can't merge without knowing the TSF */
-		rx_timestamp = -1LLU;
+	} else {
+		/*
+		 * second best option: get current TSF
+		 * (will return -1 if not supported)
+		 */
+		rx_timestamp = drv_get_tsf(local);
+	}
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "RX beacon SA=%pM BSSID="
@@ -369,13 +384,14 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	int band = local->hw.conf.channel->band;
 
-	/* TODO: Could consider removing the least recently used entry and
-	 * allow new one to be added. */
+	/*
+	 * XXX: Consider removing the least recently used entry and
+	 * 	allow new one to be added.
+	 */
 	if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: No room for a new IBSS STA "
-			       "entry %pM\n", sdata->dev->name, addr);
-		}
+		if (net_ratelimit())
+			printk(KERN_DEBUG "%s: No room for a new IBSS STA entry %pM\n",
+			       sdata->dev->name, addr);
 		return NULL;
 	}
 
@@ -432,41 +448,33 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	mod_timer(&ifibss->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
+	mod_timer(&ifibss->timer,
+		  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
 
 	ieee80211_sta_expire(sdata, IEEE80211_IBSS_INACTIVITY_LIMIT);
+
 	if (ieee80211_sta_active_ibss(sdata))
 		return;
 
-	if ((ifibss->flags & IEEE80211_IBSS_BSSID_SET) &&
-	    (!(ifibss->flags & IEEE80211_IBSS_AUTO_CHANNEL_SEL)))
+	if (ifibss->fixed_channel)
 		return;
 
 	printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other "
 	       "IBSS networks with same SSID (merge)\n", sdata->dev->name);
 
-	/* XXX maybe racy? */
-	if (sdata->local->scan_req)
-		return;
-
-	memcpy(sdata->local->int_scan_req.ssids[0].ssid,
-	       ifibss->ssid, IEEE80211_MAX_SSID_LEN);
-	sdata->local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len;
-	ieee80211_request_scan(sdata, &sdata->local->int_scan_req);
+	ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len);
 }
 
-static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
+static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
-	u8 *pos;
 	u8 bssid[ETH_ALEN];
-	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
 	u16 capability;
 	int i;
 
-	if (ifibss->flags & IEEE80211_IBSS_BSSID_SET) {
+	if (ifibss->fixed_bssid) {
 		memcpy(bssid, ifibss->bssid, ETH_ALEN);
 	} else {
 		/* Generate random, not broadcast, locally administered BSSID. Mix in
@@ -482,10 +490,7 @@ static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 	printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %pM\n",
 	       sdata->dev->name, bssid);
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	if (local->hw.conf.beacon_int == 0)
-		local->hw.conf.beacon_int = 100;
+	sband = local->hw.wiphy->bands[ifibss->channel->band];
 
 	capability = WLAN_CAPABILITY_IBSS;
 
@@ -494,29 +499,20 @@ static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 	else
 		sdata->drop_unencrypted = 0;
 
-	pos = supp_rates;
-	for (i = 0; i < sband->n_bitrates; i++) {
-		int rate = sband->bitrates[i].bitrate;
-		*pos++ = (u8) (rate / 5);
-	}
-
-	return __ieee80211_sta_join_ibss(sdata,
-					 bssid, local->hw.conf.beacon_int,
-					 local->hw.conf.channel->center_freq,
-					 sband->n_bitrates, supp_rates,
-					 capability, 0);
+	__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
+				  ifibss->channel, 3, /* first two are basic */
+				  capability, 0);
 }
 
-static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
+static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_bss *bss;
+	struct ieee80211_channel *chan = NULL;
 	const u8 *bssid = NULL;
 	int active_ibss;
-
-	if (ifibss->ssid_len == 0)
-		return -EINVAL;
+	u16 capability;
 
 	active_ibss = ieee80211_sta_active_ibss(sdata);
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
@@ -525,14 +521,23 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 
 	if (active_ibss)
-		return 0;
+		return;
 
-	if (ifibss->flags & IEEE80211_IBSS_BSSID_SET)
+	capability = WLAN_CAPABILITY_IBSS;
+	if (sdata->default_key)
+		capability |= WLAN_CAPABILITY_PRIVACY;
+
+	if (ifibss->fixed_bssid)
 		bssid = ifibss->bssid;
-	bss = (void *)cfg80211_get_bss(local->hw.wiphy, NULL, bssid,
+	if (ifibss->fixed_channel)
+		chan = ifibss->channel;
+	if (!is_zero_ether_addr(ifibss->bssid))
+		bssid = ifibss->bssid;
+	bss = (void *)cfg80211_get_bss(local->hw.wiphy, chan, bssid,
 				       ifibss->ssid, ifibss->ssid_len,
-				       WLAN_CAPABILITY_IBSS,
-				       WLAN_CAPABILITY_IBSS);
+				       WLAN_CAPABILITY_IBSS |
+				       WLAN_CAPABILITY_PRIVACY,
+				       capability);
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	if (bss)
@@ -540,18 +545,14 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 		       "%pM\n", bss->cbss.bssid, ifibss->bssid);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 
-	if (bss &&
-	    (!(ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET) ||
-	     memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN))) {
-		int ret;
-
+	if (bss && memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) {
 		printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
 		       " based on configured SSID\n",
 		       sdata->dev->name, bss->cbss.bssid);
 
-		ret = ieee80211_sta_join_ibss(sdata, bss);
+		ieee80211_sta_join_ibss(sdata, bss);
 		ieee80211_rx_bss_put(local, bss);
-		return ret;
+		return;
 	} else if (bss)
 		ieee80211_rx_bss_put(local, bss);
 
@@ -562,29 +563,24 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 	/* Selected IBSS not found in current scan results - try to scan */
 	if (ifibss->state == IEEE80211_IBSS_MLME_JOINED &&
 	    !ieee80211_sta_active_ibss(sdata)) {
-		mod_timer(&ifibss->timer, jiffies +
-					  IEEE80211_IBSS_MERGE_INTERVAL);
-	} else if (time_after(jiffies, local->last_scan_completed +
+		mod_timer(&ifibss->timer,
+			  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
+	} else if (time_after(jiffies, ifibss->last_scan_completed +
 					IEEE80211_SCAN_INTERVAL)) {
 		printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to "
 		       "join\n", sdata->dev->name);
 
-		/* XXX maybe racy? */
-		if (local->scan_req)
-			return -EBUSY;
-
-		memcpy(local->int_scan_req.ssids[0].ssid,
-		       ifibss->ssid, IEEE80211_MAX_SSID_LEN);
-		local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len;
-		return ieee80211_request_scan(sdata, &local->int_scan_req);
+		ieee80211_request_internal_scan(sdata, ifibss->ssid,
+						ifibss->ssid_len);
 	} else if (ifibss->state != IEEE80211_IBSS_MLME_JOINED) {
 		int interval = IEEE80211_SCAN_INTERVAL;
 
 		if (time_after(jiffies, ifibss->ibss_join_req +
 			       IEEE80211_IBSS_JOIN_TIMEOUT)) {
-			if (!(local->oper_channel->flags &
-						IEEE80211_CHAN_NO_IBSS))
-				return ieee80211_sta_create_ibss(sdata);
+			if (!(local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)) {
+				ieee80211_sta_create_ibss(sdata);
+				return;
+			}
 			printk(KERN_DEBUG "%s: IBSS not allowed on"
 			       " %d MHz\n", sdata->dev->name,
 			       local->hw.conf.channel->center_freq);
@@ -595,11 +591,9 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 		}
 
 		ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
-		mod_timer(&ifibss->timer, jiffies + interval);
-		return 0;
+		mod_timer(&ifibss->timer,
+			  round_jiffies(jiffies + interval));
 	}
-
-	return 0;
 }
 
 static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
@@ -614,13 +608,10 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	u8 *pos, *end;
 
 	if (ifibss->state != IEEE80211_IBSS_MLME_JOINED ||
-	    len < 24 + 2 || !ifibss->probe_resp)
+	    len < 24 + 2 || !ifibss->presp)
 		return;
 
-	if (local->ops->tx_last_beacon)
-		tx_last_beacon = local->ops->tx_last_beacon(local_to_hw(local));
-	else
-		tx_last_beacon = 1;
+	tx_last_beacon = drv_tx_last_beacon(local);
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "%s: RX ProbeReq SA=%pM DA=%pM BSSID=%pM"
@@ -649,13 +640,13 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	}
 	if (pos[1] != 0 &&
 	    (pos[1] != ifibss->ssid_len ||
-	     memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len) != 0)) {
+	     !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
 		/* Ignore ProbeReq for foreign SSID */
 		return;
 	}
 
 	/* Reply with ProbeResp */
-	skb = skb_copy(ifibss->probe_resp, GFP_KERNEL);
+	skb = skb_copy(ifibss->presp, GFP_KERNEL);
 	if (!skb)
 		return;
 
@@ -746,6 +737,9 @@ static void ieee80211_ibss_work(struct work_struct *work)
 	struct ieee80211_if_ibss *ifibss;
 	struct sk_buff *skb;
 
+	if (WARN_ON(local->suspended))
+		return;
+
 	if (!netif_running(sdata->dev))
 		return;
 
@@ -782,101 +776,63 @@ static void ieee80211_ibss_timer(unsigned long data)
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 
+	if (local->quiescing) {
+		ifibss->timer_running = true;
+		return;
+	}
+
 	set_bit(IEEE80211_IBSS_REQ_RUN, &ifibss->request);
 	queue_work(local->hw.workqueue, &ifibss->work);
 }
 
-void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata)
+#ifdef CONFIG_PM
+void ieee80211_ibss_quiesce(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	INIT_WORK(&ifibss->work, ieee80211_ibss_work);
-	setup_timer(&ifibss->timer, ieee80211_ibss_timer,
-		    (unsigned long) sdata);
-	skb_queue_head_init(&ifibss->skb_queue);
-
-	ifibss->flags |= IEEE80211_IBSS_AUTO_BSSID_SEL |
-			IEEE80211_IBSS_AUTO_CHANNEL_SEL;
+	cancel_work_sync(&ifibss->work);
+	if (del_timer_sync(&ifibss->timer))
+		ifibss->timer_running = true;
 }
 
-int ieee80211_ibss_commit(struct ieee80211_sub_if_data *sdata)
+void ieee80211_ibss_restart(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	ifibss->flags &= ~IEEE80211_IBSS_PREV_BSSID_SET;
-
-	if (ifibss->ssid_len)
-		ifibss->flags |= IEEE80211_IBSS_SSID_SET;
-	else
-		ifibss->flags &= ~IEEE80211_IBSS_SSID_SET;
-
-	ifibss->ibss_join_req = jiffies;
-	ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
-	set_bit(IEEE80211_IBSS_REQ_RUN, &ifibss->request);
-
-	return 0;
-}
-
-int ieee80211_ibss_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len)
-{
-	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
-
-	if (len > IEEE80211_MAX_SSID_LEN)
-		return -EINVAL;
-
-	if (ifibss->ssid_len != len || memcmp(ifibss->ssid, ssid, len) != 0) {
-		memset(ifibss->ssid, 0, sizeof(ifibss->ssid));
-		memcpy(ifibss->ssid, ssid, len);
-		ifibss->ssid_len = len;
+	if (ifibss->timer_running) {
+		add_timer(&ifibss->timer);
+		ifibss->timer_running = false;
 	}
-
-	return ieee80211_ibss_commit(sdata);
-}
-
-int ieee80211_ibss_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len)
-{
-	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
-
-	memcpy(ssid, ifibss->ssid, ifibss->ssid_len);
-	*len = ifibss->ssid_len;
-
-	return 0;
 }
+#endif
 
-int ieee80211_ibss_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
+void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	if (is_valid_ether_addr(bssid)) {
-		memcpy(ifibss->bssid, bssid, ETH_ALEN);
-		ifibss->flags |= IEEE80211_IBSS_BSSID_SET;
-	} else {
-		memset(ifibss->bssid, 0, ETH_ALEN);
-		ifibss->flags &= ~IEEE80211_IBSS_BSSID_SET;
-	}
-
-	if (netif_running(sdata->dev)) {
-		if (ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID)) {
-			printk(KERN_DEBUG "%s: Failed to config new BSSID to "
-			       "the low-level driver\n", sdata->dev->name);
-		}
-	}
-
-	return ieee80211_ibss_commit(sdata);
+	INIT_WORK(&ifibss->work, ieee80211_ibss_work);
+	setup_timer(&ifibss->timer, ieee80211_ibss_timer,
+		    (unsigned long) sdata);
+	skb_queue_head_init(&ifibss->skb_queue);
 }
 
 /* scan finished notification */
 void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local)
 {
-	struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-	struct ieee80211_if_ibss *ifibss;
-
-	if (sdata && sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		ifibss = &sdata->u.ibss;
-		if ((!(ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET)) ||
-		    !ieee80211_sta_active_ibss(sdata))
-			ieee80211_sta_find_ibss(sdata);
+	struct ieee80211_sub_if_data *sdata;
+
+	mutex_lock(&local->iflist_mtx);
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
+			continue;
+		if (!sdata->u.ibss.ssid_len)
+			continue;
+		sdata->u.ibss.last_scan_completed = jiffies;
+		ieee80211_sta_find_ibss(sdata);
 	}
+	mutex_unlock(&local->iflist_mtx);
 }
 
 ieee80211_rx_result
@@ -906,3 +862,86 @@ ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 
 	return RX_DROP_MONITOR;
 }
+
+int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
+			struct cfg80211_ibss_params *params)
+{
+	struct sk_buff *skb;
+
+	if (params->bssid) {
+		memcpy(sdata->u.ibss.bssid, params->bssid, ETH_ALEN);
+		sdata->u.ibss.fixed_bssid = true;
+	} else
+		sdata->u.ibss.fixed_bssid = false;
+
+	sdata->vif.bss_conf.beacon_int = params->beacon_interval;
+
+	sdata->u.ibss.channel = params->channel;
+	sdata->u.ibss.fixed_channel = params->channel_fixed;
+
+	if (params->ie) {
+		sdata->u.ibss.ie = kmemdup(params->ie, params->ie_len,
+					   GFP_KERNEL);
+		if (sdata->u.ibss.ie)
+			sdata->u.ibss.ie_len = params->ie_len;
+	}
+
+	skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
+			    36 /* bitrates */ +
+			    34 /* SSID */ +
+			    3  /* DS params */ +
+			    4  /* IBSS params */ +
+			    params->ie_len);
+	if (!skb)
+		return -ENOMEM;
+
+	sdata->u.ibss.skb = skb;
+	sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
+	sdata->u.ibss.ibss_join_req = jiffies;
+
+	memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
+
+	/*
+	 * The ssid_len setting below is used to see whether
+	 * we are active, and we need all other settings
+	 * before that may get visible.
+	 */
+	mb();
+
+	sdata->u.ibss.ssid_len = params->ssid_len;
+
+	ieee80211_recalc_idle(sdata->local);
+
+	set_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
+	queue_work(sdata->local->hw.workqueue, &sdata->u.ibss.work);
+
+	return 0;
+}
+
+int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
+{
+	struct sk_buff *skb;
+
+	del_timer_sync(&sdata->u.ibss.timer);
+	clear_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
+	cancel_work_sync(&sdata->u.ibss.work);
+	clear_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
+
+	sta_info_flush(sdata->local, sdata);
+
+	/* remove beacon */
+	kfree(sdata->u.ibss.ie);
+	skb = sdata->u.ibss.presp;
+	rcu_assign_pointer(sdata->u.ibss.presp, NULL);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+	synchronize_rcu();
+	kfree_skb(skb);
+
+	skb_queue_purge(&sdata->u.ibss.skb_queue);
+	memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+	sdata->u.ibss.ssid_len = 0;
+
+	ieee80211_recalc_idle(sdata->local);
+
+	return 0;
+}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e6ed78cb16b..4dbc2896419 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -24,7 +24,6 @@
 #include <linux/spinlock.h>
 #include <linux/etherdevice.h>
 #include <net/cfg80211.h>
-#include <net/wireless.h>
 #include <net/iw_handler.h>
 #include <net/mac80211.h>
 #include "key.h"
@@ -236,7 +235,7 @@ struct mesh_preq_queue {
 #define IEEE80211_STA_ASSOCIATED	BIT(4)
 #define IEEE80211_STA_PROBEREQ_POLL	BIT(5)
 #define IEEE80211_STA_CREATE_IBSS	BIT(6)
-/* hole at 7, please re-use */
+#define IEEE80211_STA_CONTROL_PORT	BIT(7)
 #define IEEE80211_STA_WMM_ENABLED	BIT(8)
 /* hole at 9, please re-use */
 #define IEEE80211_STA_AUTO_SSID_SEL	BIT(10)
@@ -249,9 +248,8 @@ struct mesh_preq_queue {
 #define IEEE80211_STA_EXT_SME		BIT(17)
 /* flags for MLME request */
 #define IEEE80211_STA_REQ_SCAN 0
-#define IEEE80211_STA_REQ_DIRECT_PROBE 1
-#define IEEE80211_STA_REQ_AUTH 2
-#define IEEE80211_STA_REQ_RUN  3
+#define IEEE80211_STA_REQ_AUTH 1
+#define IEEE80211_STA_REQ_RUN  2
 
 /* bitfield of allowed auth algs */
 #define IEEE80211_AUTH_ALG_OPEN BIT(0)
@@ -295,6 +293,9 @@ struct ieee80211_if_managed {
 	int auth_tries; /* retries for auth req */
 	int assoc_tries; /* retries for assoc req */
 
+	unsigned long timers_running; /* used for quiesce/restart */
+	bool powersave; /* powersave requested for this iface */
+
 	unsigned long request;
 
 	unsigned long last_probe;
@@ -306,6 +307,8 @@ struct ieee80211_if_managed {
 	int auth_alg; /* currently used IEEE 802.11 authentication algorithm */
 	int auth_transaction;
 
+	u32 beacon_crc;
+
 	enum {
 		IEEE80211_MFP_DISABLED,
 		IEEE80211_MFP_OPTIONAL,
@@ -319,14 +322,6 @@ struct ieee80211_if_managed {
 	size_t sme_auth_ie_len;
 };
 
-enum ieee80211_ibss_flags {
-	IEEE80211_IBSS_AUTO_CHANNEL_SEL		= BIT(0),
-	IEEE80211_IBSS_AUTO_BSSID_SEL		= BIT(1),
-	IEEE80211_IBSS_BSSID_SET		= BIT(2),
-	IEEE80211_IBSS_PREV_BSSID_SET		= BIT(3),
-	IEEE80211_IBSS_SSID_SET			= BIT(4),
-};
-
 enum ieee80211_ibss_request {
 	IEEE80211_IBSS_REQ_RUN	= 0,
 };
@@ -337,17 +332,23 @@ struct ieee80211_if_ibss {
 
 	struct sk_buff_head skb_queue;
 
-	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	u8 ssid_len;
+	unsigned long request;
+	unsigned long last_scan_completed;
 
-	u32 flags;
+	bool timer_running;
 
-	u8 bssid[ETH_ALEN];
+	bool fixed_bssid;
+	bool fixed_channel;
 
-	unsigned long request;
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len, ie_len;
+	u8 *ie;
+	struct ieee80211_channel *channel;
 
 	unsigned long ibss_join_req;
-	struct sk_buff *probe_resp; /* ProbeResp template for IBSS */
+	/* probe response/beacon for IBSS */
+	struct sk_buff *presp, *skb;
 
 	enum {
 		IEEE80211_IBSS_MLME_SEARCH,
@@ -361,6 +362,8 @@ struct ieee80211_if_mesh {
 	struct timer_list mesh_path_timer;
 	struct sk_buff_head skb_queue;
 
+	unsigned long timers_running;
+
 	bool housekeeping;
 
 	u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN];
@@ -430,6 +433,12 @@ struct ieee80211_sub_if_data {
 
 	int drop_unencrypted;
 
+	/*
+	 * keep track of whether the HT opmode (stored in
+	 * vif.bss_info.ht_operation_mode) is valid.
+	 */
+	bool ht_opmode_valid;
+
 	/* Fragment table for host-based reassembly */
 	struct ieee80211_fragment_entry	fragments[IEEE80211_FRAGMENT_MAX];
 	unsigned int fragment_next;
@@ -580,6 +589,7 @@ enum queue_stop_reason {
 	IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
 	IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 	IEEE80211_QUEUE_STOP_REASON_PENDING,
+	IEEE80211_QUEUE_STOP_REASON_SKB_ADD,
 };
 
 struct ieee80211_master_priv {
@@ -606,6 +616,21 @@ struct ieee80211_local {
 	unsigned int filter_flags; /* FIF_* */
 	struct iw_statistics wstats;
 	bool tim_in_locked_section; /* see ieee80211_beacon_get() */
+
+	/*
+	 * suspended is true if we finished all the suspend _and_ we have
+	 * not yet come up from resume. This is to be used by mac80211
+	 * to ensure driver sanity during suspend and mac80211's own
+	 * sanity. It can eventually be used for WoW as well.
+	 */
+	bool suspended;
+
+	/*
+	 * quiescing is true during the suspend process _only_ to
+	 * ease timer cancelling etc.
+	 */
+	bool quiescing;
+
 	int tx_headroom; /* required headroom for hardware/radiotap */
 
 	/* Tasklet and skb queue to process calls from IRQ mode. All frames
@@ -626,8 +651,6 @@ struct ieee80211_local {
 	spinlock_t sta_lock;
 	unsigned long num_sta;
 	struct list_head sta_list;
-	struct list_head sta_flush_list;
-	struct work_struct sta_flush_work;
 	struct sta_info *sta_hash[STA_HASH_SIZE];
 	struct timer_list sta_cleanup;
 
@@ -647,9 +670,6 @@ struct ieee80211_local {
 
 	struct rate_control_ref *rate_ctrl;
 
-	int rts_threshold;
-	int fragmentation_threshold;
-
 	struct crypto_blkcipher *wep_tx_tfm;
 	struct crypto_blkcipher *wep_rx_tfm;
 	u32 wep_iv;
@@ -666,15 +686,18 @@ struct ieee80211_local {
 
 
 	/* Scanning and BSS list */
+	struct mutex scan_mtx;
 	bool sw_scanning, hw_scanning;
 	struct cfg80211_ssid scan_ssid;
 	struct cfg80211_scan_request int_scan_req;
 	struct cfg80211_scan_request *scan_req;
 	struct ieee80211_channel *scan_channel;
+	const u8 *orig_ies;
+	int orig_ies_len;
 	int scan_channel_idx;
+	int scan_ies_len;
 
 	enum { SCAN_SET_CHANNEL, SCAN_SEND_PROBE } scan_state;
-	unsigned long last_scan_completed;
 	struct delayed_work scan_work;
 	struct ieee80211_sub_if_data *scan_sdata;
 	enum nl80211_channel_type oper_channel_type;
@@ -736,28 +759,32 @@ struct ieee80211_local {
 	int wifi_wme_noack_test;
 	unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
 
-	bool powersave;
 	bool pspolling;
+	/*
+	 * PS can only be enabled when we have exactly one managed
+	 * interface (and monitors) in PS, this then points there.
+	 */
+	struct ieee80211_sub_if_data *ps_sdata;
 	struct work_struct dynamic_ps_enable_work;
 	struct work_struct dynamic_ps_disable_work;
 	struct timer_list dynamic_ps_timer;
+	struct notifier_block network_latency_notifier;
 
 	int user_power_level; /* in dBm */
 	int power_constr_level; /* in dBm */
 
+	struct work_struct restart_work;
+
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct local_debugfsdentries {
 		struct dentry *rcdir;
 		struct dentry *rcname;
 		struct dentry *frequency;
-		struct dentry *rts_threshold;
-		struct dentry *fragmentation_threshold;
-		struct dentry *short_retry_limit;
-		struct dentry *long_retry_limit;
 		struct dentry *total_ps_buffered;
 		struct dentry *wep_iv;
 		struct dentry *tsf;
 		struct dentry *reset;
+		struct dentry *noack;
 		struct dentry *statistics;
 		struct local_debugfsdentries_statsdentries {
 			struct dentry *transmitted_fragment_count;
@@ -830,7 +857,7 @@ struct ieee802_11_elems {
 	u8 *fh_params;
 	u8 *ds_params;
 	u8 *cf_params;
-	u8 *tim;
+	struct ieee80211_tim_ie *tim;
 	u8 *ibss_params;
 	u8 *challenge;
 	u8 *wpa;
@@ -903,7 +930,6 @@ static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
 
 
 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed);
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed);
 void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 				      u32 changed);
@@ -927,12 +953,16 @@ int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason
 int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason);
 void ieee80211_send_pspoll(struct ieee80211_local *local,
 			   struct ieee80211_sub_if_data *sdata);
+void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency);
+int ieee80211_max_network_latency(struct notifier_block *nb,
+				  unsigned long data, void *dummy);
+void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
+				      struct ieee80211_channel_sw_ie *sw_elem,
+				      struct ieee80211_bss *bss);
+void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata);
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata);
 
 /* IBSS code */
-int ieee80211_ibss_commit(struct ieee80211_sub_if_data *sdata);
-int ieee80211_ibss_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len);
-int ieee80211_ibss_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len);
-int ieee80211_ibss_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid);
 void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
 void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata);
 ieee80211_rx_result
@@ -940,14 +970,22 @@ ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 		       struct ieee80211_rx_status *rx_status);
 struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 					u8 *bssid, u8 *addr, u32 supp_rates);
+int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
+			struct cfg80211_ibss_params *params);
+int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ibss_quiesce(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ibss_restart(struct ieee80211_sub_if_data *sdata);
 
 /* scan/BSS handling */
 void ieee80211_scan_work(struct work_struct *work);
+int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
+				    const u8 *ssid, u8 ssid_len);
 int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
 			   struct cfg80211_scan_request *req);
 int ieee80211_scan_results(struct ieee80211_local *local,
 			   struct iw_request_info *info,
 			   char *buf, size_t len);
+void ieee80211_scan_cancel(struct ieee80211_local *local);
 ieee80211_rx_result
 ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata,
 		  struct sk_buff *skb,
@@ -956,9 +994,6 @@ int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
 			       const char *ie, size_t len);
 
 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local);
-void ieee80211_scan_failed(struct ieee80211_local *local);
-int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
-			 struct cfg80211_scan_request *req);
 struct ieee80211_bss *
 ieee80211_bss_info_update(struct ieee80211_local *local,
 			  struct ieee80211_rx_status *rx_status,
@@ -983,6 +1018,8 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 			     enum nl80211_iftype type);
 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
 void ieee80211_remove_interfaces(struct ieee80211_local *local);
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
+void ieee80211_recalc_idle(struct ieee80211_local *local);
 
 /* tx handling */
 void ieee80211_clear_tx_pending(struct ieee80211_local *local);
@@ -995,9 +1032,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
 void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
 				       struct ieee80211_ht_cap *ht_cap_ie,
 				       struct ieee80211_sta_ht_cap *ht_cap);
-u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
-			struct ieee80211_ht_info *hti,
-			u16 ap_ht_cap_flags);
 void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
 void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
 			  const u8 *da, u16 tid,
@@ -1027,24 +1061,23 @@ int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 				       struct ieee80211_mgmt *mgmt,
 				       size_t len);
-void ieee80211_chswitch_timer(unsigned long data);
-void ieee80211_chswitch_work(struct work_struct *work);
-void ieee80211_process_chanswitch(struct ieee80211_sub_if_data *sdata,
-				  struct ieee80211_channel_sw_ie *sw_elem,
-				  struct ieee80211_bss *bss);
-void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
-				 u16 capab_info, u8 *pwr_constr_elem,
-				 u8 pwr_constr_elem_len);
-
-/* Suspend/resume */
+
+/* Suspend/resume and hw reconfiguration */
+int ieee80211_reconfig(struct ieee80211_local *local);
+
 #ifdef CONFIG_PM
 int __ieee80211_suspend(struct ieee80211_hw *hw);
-int __ieee80211_resume(struct ieee80211_hw *hw);
+
+static inline int __ieee80211_resume(struct ieee80211_hw *hw)
+{
+	return ieee80211_reconfig(hw_to_local(hw));
+}
 #else
 static inline int __ieee80211_suspend(struct ieee80211_hw *hw)
 {
 	return 0;
 }
+
 static inline int __ieee80211_resume(struct ieee80211_hw *hw)
 {
 	return 0;
@@ -1053,19 +1086,20 @@ static inline int __ieee80211_resume(struct ieee80211_hw *hw)
 
 /* utility functions/constants */
 extern void *mac80211_wiphy_privid; /* for wiphy privid */
-extern const unsigned char rfc1042_header[6];
-extern const unsigned char bridge_tunnel_header[6];
 u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
 			enum nl80211_iftype type);
 int ieee80211_frame_duration(struct ieee80211_local *local, size_t len,
 			     int rate, int erp, int short_preamble);
 void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
-				     struct ieee80211_hdr *hdr);
+				     struct ieee80211_hdr *hdr, const u8 *tsc);
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata);
 void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 		      int encrypt);
 void ieee802_11_parse_elems(u8 *start, size_t len,
 			    struct ieee802_11_elems *elems);
+u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
+			       struct ieee802_11_elems *elems,
+			       u64 filter, u32 crc);
 int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
 u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
 			      enum ieee80211_band band);
@@ -1088,14 +1122,20 @@ void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
 				    enum queue_stop_reason reason);
 void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
 				    enum queue_stop_reason reason);
+void ieee80211_add_pending_skb(struct ieee80211_local *local,
+			       struct sk_buff *skb);
+int ieee80211_add_pending_skbs(struct ieee80211_local *local,
+			       struct sk_buff_head *skbs);
 
 void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 			 u16 transaction, u16 auth_alg,
 			 u8 *extra, size_t extra_len,
 			 const u8 *bssid, int encrypt);
+int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+			     const u8 *ie, size_t ie_len);
 void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
-			      u8 *ssid, size_t ssid_len,
-			      u8 *ie, size_t ie_len);
+			      const u8 *ssid, size_t ssid_len,
+			      const u8 *ie, size_t ie_len);
 
 void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
 				  const size_t supp_rates_len,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 91e8e1bacaa..b7c8a448429 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -20,6 +20,7 @@
 #include "debugfs_netdev.h"
 #include "mesh.h"
 #include "led.h"
+#include "driver-ops.h"
 
 /**
  * DOC: Interface list locking
@@ -164,14 +165,12 @@ static int ieee80211_open(struct net_device *dev)
 	}
 
 	if (local->open_count == 0) {
-		res = 0;
-		if (local->ops->start)
-			res = local->ops->start(local_to_hw(local));
+		res = drv_start(local);
 		if (res)
 			goto err_del_bss;
 		/* we're brought up, everything changes */
 		hw_reconf_flags = ~0;
-		ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+		ieee80211_led_radio(local, true);
 	}
 
 	/*
@@ -199,8 +198,8 @@ static int ieee80211_open(struct net_device *dev)
 	 * Validate the MAC address for this device.
 	 */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		if (!local->open_count && local->ops->stop)
-			local->ops->stop(local_to_hw(local));
+		if (!local->open_count)
+			drv_stop(local);
 		return -EADDRNOTAVAIL;
 	}
 
@@ -235,17 +234,13 @@ static int ieee80211_open(struct net_device *dev)
 		netif_addr_unlock_bh(local->mdev);
 		break;
 	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_ADHOC:
-		if (sdata->vif.type == NL80211_IFTYPE_STATION)
-			sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
-		else
-			sdata->u.ibss.flags &= ~IEEE80211_IBSS_PREV_BSSID_SET;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
 		/* fall through */
 	default:
 		conf.vif = &sdata->vif;
 		conf.type = sdata->vif.type;
 		conf.mac_addr = dev->dev_addr;
-		res = local->ops->add_interface(local_to_hw(local), &conf);
+		res = drv_add_interface(local, &conf);
 		if (res)
 			goto err_stop;
 
@@ -306,6 +301,8 @@ static int ieee80211_open(struct net_device *dev)
 	if (sdata->flags & IEEE80211_SDATA_PROMISC)
 		atomic_inc(&local->iff_promiscs);
 
+	hw_reconf_flags |= __ieee80211_recalc_idle(local);
+
 	local->open_count++;
 	if (hw_reconf_flags) {
 		ieee80211_hw_config(local, hw_reconf_flags);
@@ -317,6 +314,8 @@ static int ieee80211_open(struct net_device *dev)
 		ieee80211_set_wmm_default(sdata);
 	}
 
+	ieee80211_recalc_ps(local, -1);
+
 	/*
 	 * ieee80211_sta_work is disabled while network interface
 	 * is down. Therefore, some configuration changes may not
@@ -325,17 +324,15 @@ static int ieee80211_open(struct net_device *dev)
 	 */
 	if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		queue_work(local->hw.workqueue, &sdata->u.mgd.work);
-	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		queue_work(local->hw.workqueue, &sdata->u.ibss.work);
 
 	netif_tx_start_all_queues(dev);
 
 	return 0;
  err_del_interface:
-	local->ops->remove_interface(local_to_hw(local), &conf);
+	drv_remove_interface(local, &conf);
  err_stop:
-	if (!local->open_count && local->ops->stop)
-		local->ops->stop(local_to_hw(local));
+	if (!local->open_count)
+		drv_stop(local);
  err_del_bss:
 	sdata->bss = NULL;
 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
@@ -497,7 +494,6 @@ static int ieee80211_stop(struct net_device *dev)
 		/* fall through */
 	case NL80211_IFTYPE_ADHOC:
 		if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-			memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
 			del_timer_sync(&sdata->u.ibss.timer);
 			cancel_work_sync(&sdata->u.ibss.work);
 			synchronize_rcu();
@@ -549,19 +545,22 @@ static int ieee80211_stop(struct net_device *dev)
 		conf.mac_addr = dev->dev_addr;
 		/* disable all keys for as long as this netdev is down */
 		ieee80211_disable_keys(sdata);
-		local->ops->remove_interface(local_to_hw(local), &conf);
+		drv_remove_interface(local, &conf);
 	}
 
 	sdata->bss = NULL;
 
+	hw_reconf_flags |= __ieee80211_recalc_idle(local);
+
+	ieee80211_recalc_ps(local, -1);
+
 	if (local->open_count == 0) {
 		if (netif_running(local->mdev))
 			dev_close(local->mdev);
 
-		if (local->ops->stop)
-			local->ops->stop(local_to_hw(local));
+		drv_stop(local);
 
-		ieee80211_led_radio(local, 0);
+		ieee80211_led_radio(local, false);
 
 		flush_workqueue(local->hw.workqueue);
 
@@ -649,7 +648,8 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
 			mesh_rmc_free(sdata);
 		break;
 	case NL80211_IFTYPE_ADHOC:
-		kfree_skb(sdata->u.ibss.probe_resp);
+		if (WARN_ON(sdata->u.ibss.presp))
+			kfree_skb(sdata->u.ibss.presp);
 		break;
 	case NL80211_IFTYPE_STATION:
 		kfree(sdata->u.mgd.extra_ie);
@@ -896,3 +896,74 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 		unregister_netdevice(sdata->dev);
 	}
 }
+
+static u32 ieee80211_idle_off(struct ieee80211_local *local,
+			      const char *reason)
+{
+	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
+		return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	printk(KERN_DEBUG "%s: device no longer idle - %s\n",
+	       wiphy_name(local->hw.wiphy), reason);
+#endif
+
+	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 ieee80211_idle_on(struct ieee80211_local *local)
+{
+	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
+		return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	printk(KERN_DEBUG "%s: device now idle\n",
+	       wiphy_name(local->hw.wiphy));
+#endif
+
+	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+	int count = 0;
+
+	if (local->hw_scanning || local->sw_scanning)
+		return ieee80211_idle_off(local, "scanning");
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		/* do not count disabled managed interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    sdata->u.mgd.state == IEEE80211_STA_MLME_DISABLED)
+			continue;
+		/* do not count unused IBSS interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+		    !sdata->u.ibss.ssid_len)
+			continue;
+		/* count everything else */
+		count++;
+	}
+
+	if (!count)
+		return ieee80211_idle_on(local);
+	else
+		return ieee80211_idle_off(local, "in use");
+
+	return 0;
+}
+
+void ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	u32 chg;
+
+	mutex_lock(&local->iflist_mtx);
+	chg = __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->iflist_mtx);
+	if (chg)
+		ieee80211_hw_config(local, chg);
+}
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 687acf23054..ce267565e18 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -16,6 +16,7 @@
 #include <linux/rtnetlink.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "debugfs_key.h"
 #include "aes_ccm.h"
 #include "aes_cmac.h"
@@ -136,8 +137,7 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 				     struct ieee80211_sub_if_data,
 				     u.ap);
 
-	ret = key->local->ops->set_key(local_to_hw(key->local), SET_KEY,
-				       &sdata->vif, sta, &key->conf);
+	ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
 
 	if (!ret) {
 		spin_lock(&todo_lock);
@@ -179,8 +179,8 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
 				     struct ieee80211_sub_if_data,
 				     u.ap);
 
-	ret = key->local->ops->set_key(local_to_hw(key->local), DISABLE_KEY,
-				       &sdata->vif, sta, &key->conf);
+	ret = drv_set_key(key->local, DISABLE_KEY, &sdata->vif,
+			  sta, &key->conf);
 
 	if (ret)
 		printk(KERN_ERR "mac80211-%s: failed to remove key "
@@ -290,9 +290,11 @@ static void __ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
 struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
 					  int idx,
 					  size_t key_len,
-					  const u8 *key_data)
+					  const u8 *key_data,
+					  size_t seq_len, const u8 *seq)
 {
 	struct ieee80211_key *key;
+	int i, j;
 
 	BUG_ON(idx < 0 || idx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS);
 
@@ -318,14 +320,31 @@ struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
 	case ALG_TKIP:
 		key->conf.iv_len = TKIP_IV_LEN;
 		key->conf.icv_len = TKIP_ICV_LEN;
+		if (seq) {
+			for (i = 0; i < NUM_RX_DATA_QUEUES; i++) {
+				key->u.tkip.rx[i].iv32 =
+					get_unaligned_le32(&seq[2]);
+				key->u.tkip.rx[i].iv16 =
+					get_unaligned_le16(seq);
+			}
+		}
 		break;
 	case ALG_CCMP:
 		key->conf.iv_len = CCMP_HDR_LEN;
 		key->conf.icv_len = CCMP_MIC_LEN;
+		if (seq) {
+			for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
+				for (j = 0; j < CCMP_PN_LEN; j++)
+					key->u.ccmp.rx_pn[i][j] =
+						seq[CCMP_PN_LEN - j - 1];
+		}
 		break;
 	case ALG_AES_CMAC:
 		key->conf.iv_len = 0;
 		key->conf.icv_len = sizeof(struct ieee80211_mmie);
+		if (seq)
+			for (j = 0; j < 6; j++)
+				key->u.aes_cmac.rx_pn[j] = seq[6 - j - 1];
 		break;
 	}
 	memcpy(key->conf.key, key_data, key_len);
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index 215d3ef42a4..9572e00f532 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -144,7 +144,8 @@ struct ieee80211_key {
 struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
 					  int idx,
 					  size_t key_len,
-					  const u8 *key_data);
+					  const u8 *key_data,
+					  size_t seq_len, const u8 *seq);
 /*
  * Insert a key into data structures (sdata, sta if necessary)
  * to make it used, free old key.
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 14134193cd1..092a017b237 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -21,10 +21,12 @@
 #include <linux/wireless.h>
 #include <linux/rtnetlink.h>
 #include <linux/bitmap.h>
+#include <linux/pm_qos_params.h>
 #include <net/net_namespace.h>
 #include <net/cfg80211.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "mesh.h"
 #include "wep.h"
@@ -80,10 +82,9 @@ void ieee80211_configure_filter(struct ieee80211_local *local)
 	/* be a bit nasty */
 	new_flags |= (1<<31);
 
-	local->ops->configure_filter(local_to_hw(local),
-				     changed_flags, &new_flags,
-				     local->mdev->mc_count,
-				     local->mdev->mc_list);
+	drv_configure_filter(local, changed_flags, &new_flags,
+			     local->mdev->mc_count,
+			     local->mdev->mc_list);
 
 	WARN_ON(new_flags & (1<<31));
 
@@ -151,93 +152,19 @@ static void ieee80211_master_set_multicast_list(struct net_device *dev)
 	ieee80211_configure_filter(local);
 }
 
-/* everything else */
-
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_if_conf conf;
-
-	if (WARN_ON(!netif_running(sdata->dev)))
-		return 0;
-
-	memset(&conf, 0, sizeof(conf));
-
-	if (sdata->vif.type == NL80211_IFTYPE_STATION)
-		conf.bssid = sdata->u.mgd.bssid;
-	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		conf.bssid = sdata->u.ibss.bssid;
-	else if (sdata->vif.type == NL80211_IFTYPE_AP)
-		conf.bssid = sdata->dev->dev_addr;
-	else if (ieee80211_vif_is_mesh(&sdata->vif)) {
-		static const u8 zero[ETH_ALEN] = { 0 };
-		conf.bssid = zero;
-	} else {
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (!local->ops->config_interface)
-		return 0;
-
-	switch (sdata->vif.type) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_ADHOC:
-	case NL80211_IFTYPE_MESH_POINT:
-		break;
-	default:
-		/* do not warn to simplify caller in scan.c */
-		changed &= ~IEEE80211_IFCC_BEACON_ENABLED;
-		if (WARN_ON(changed & IEEE80211_IFCC_BEACON))
-			return -EINVAL;
-		changed &= ~IEEE80211_IFCC_BEACON;
-		break;
-	}
-
-	if (changed & IEEE80211_IFCC_BEACON_ENABLED) {
-		if (local->sw_scanning) {
-			conf.enable_beacon = false;
-		} else {
-			/*
-			 * Beacon should be enabled, but AP mode must
-			 * check whether there is a beacon configured.
-			 */
-			switch (sdata->vif.type) {
-			case NL80211_IFTYPE_AP:
-				conf.enable_beacon =
-					!!rcu_dereference(sdata->u.ap.beacon);
-				break;
-			case NL80211_IFTYPE_ADHOC:
-				conf.enable_beacon = !!sdata->u.ibss.probe_resp;
-				break;
-			case NL80211_IFTYPE_MESH_POINT:
-				conf.enable_beacon = true;
-				break;
-			default:
-				/* not reached */
-				WARN_ON(1);
-				break;
-			}
-		}
-	}
-
-	conf.changed = changed;
-
-	return local->ops->config_interface(local_to_hw(local),
-					    &sdata->vif, &conf);
-}
-
 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 {
-	struct ieee80211_channel *chan;
+	struct ieee80211_channel *chan, *scan_chan;
 	int ret = 0;
 	int power;
 	enum nl80211_channel_type channel_type;
 
 	might_sleep();
 
-	if (local->sw_scanning) {
-		chan = local->scan_channel;
+	scan_chan = local->scan_channel;
+
+	if (scan_chan) {
+		chan = scan_chan;
 		channel_type = NL80211_CHAN_NO_HT;
 	} else {
 		chan = local->oper_channel;
@@ -251,7 +178,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
 	}
 
-	if (local->sw_scanning)
+	if (scan_chan)
 		power = chan->max_power;
 	else
 		power = local->power_constr_level ?
@@ -267,7 +194,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 	}
 
 	if (changed && local->open_count) {
-		ret = local->ops->config(local_to_hw(local), changed);
+		ret = drv_config(local, changed);
 		/*
 		 * Goal:
 		 * HW reconfiguration should never fail, the driver has told
@@ -292,18 +219,78 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 				      u32 changed)
 {
 	struct ieee80211_local *local = sdata->local;
+	static const u8 zero[ETH_ALEN] = { 0 };
 
-	if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
+	if (!changed)
 		return;
 
-	if (!changed)
+	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+		/*
+		 * While not associated, claim a BSSID of all-zeroes
+		 * so that drivers don't do any weird things with the
+		 * BSSID at that time.
+		 */
+		if (sdata->vif.bss_conf.assoc)
+			sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
+		else
+			sdata->vif.bss_conf.bssid = zero;
+	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
+	else if (sdata->vif.type == NL80211_IFTYPE_AP)
+		sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
+	else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		sdata->vif.bss_conf.bssid = zero;
+	} else {
+		WARN_ON(1);
 		return;
+	}
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
+		break;
+	default:
+		/* do not warn to simplify caller in scan.c */
+		changed &= ~BSS_CHANGED_BEACON_ENABLED;
+		if (WARN_ON(changed & BSS_CHANGED_BEACON))
+			return;
+		break;
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED) {
+		if (local->sw_scanning) {
+			sdata->vif.bss_conf.enable_beacon = false;
+		} else {
+			/*
+			 * Beacon should be enabled, but AP mode must
+			 * check whether there is a beacon configured.
+			 */
+			switch (sdata->vif.type) {
+			case NL80211_IFTYPE_AP:
+				sdata->vif.bss_conf.enable_beacon =
+					!!rcu_dereference(sdata->u.ap.beacon);
+				break;
+			case NL80211_IFTYPE_ADHOC:
+				sdata->vif.bss_conf.enable_beacon =
+					!!rcu_dereference(sdata->u.ibss.presp);
+				break;
+			case NL80211_IFTYPE_MESH_POINT:
+				sdata->vif.bss_conf.enable_beacon = true;
+				break;
+			default:
+				/* not reached */
+				WARN_ON(1);
+				break;
+			}
+		}
+	}
+
+	drv_bss_info_changed(local, &sdata->vif,
+			     &sdata->vif.bss_conf, changed);
 
-	if (local->ops->bss_info_changed)
-		local->ops->bss_info_changed(local_to_hw(local),
-					     &sdata->vif,
-					     &sdata->vif.bss_conf,
-					     changed);
+	/* DEPRECATED */
+	local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
 }
 
 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
@@ -382,60 +369,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
 	}
 }
 
-/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
- * make a prepared TX frame (one that has been given to hw) to look like brand
- * new IEEE 802.11 frame that is ready to go through TX processing again.
- */
-static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
-				      struct ieee80211_key *key,
-				      struct sk_buff *skb)
-{
-	unsigned int hdrlen, iv_len, mic_len;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-
-	hdrlen = ieee80211_hdrlen(hdr->frame_control);
-
-	if (!key)
-		goto no_key;
-
-	switch (key->conf.alg) {
-	case ALG_WEP:
-		iv_len = WEP_IV_LEN;
-		mic_len = WEP_ICV_LEN;
-		break;
-	case ALG_TKIP:
-		iv_len = TKIP_IV_LEN;
-		mic_len = TKIP_ICV_LEN;
-		break;
-	case ALG_CCMP:
-		iv_len = CCMP_HDR_LEN;
-		mic_len = CCMP_MIC_LEN;
-		break;
-	default:
-		goto no_key;
-	}
-
-	if (skb->len >= hdrlen + mic_len &&
-	    !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-		skb_trim(skb, skb->len - mic_len);
-	if (skb->len >= hdrlen + iv_len) {
-		memmove(skb->data + iv_len, skb->data, hdrlen);
-		hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len);
-	}
-
-no_key:
-	if (ieee80211_is_data_qos(hdr->frame_control)) {
-		hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
-		memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data,
-			hdrlen - IEEE80211_QOS_CTL_LEN);
-		skb_pull(skb, IEEE80211_QOS_CTL_LEN);
-	}
-}
-
 static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 					    struct sta_info *sta,
 					    struct sk_buff *skb)
 {
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
 	sta->tx_filtered_count++;
 
 	/*
@@ -477,16 +416,15 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 	 */
 	if (test_sta_flags(sta, WLAN_STA_PS) &&
 	    skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
-		ieee80211_remove_tx_extra(local, sta->key, skb);
 		skb_queue_tail(&sta->tx_filtered, skb);
 		return;
 	}
 
-	if (!test_sta_flags(sta, WLAN_STA_PS) && !skb->requeue) {
+	if (!test_sta_flags(sta, WLAN_STA_PS) &&
+	    !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
 		/* Software retry the packet once */
-		skb->requeue = 1;
-		ieee80211_remove_tx_extra(local, sta->key, skb);
-		dev_queue_xmit(skb);
+		info->flags |= IEEE80211_TX_INTFL_RETRIED;
+		ieee80211_add_pending_skb(local, skb);
 		return;
 	}
 
@@ -696,6 +634,28 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(ieee80211_tx_status);
 
+static void ieee80211_restart_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local, restart_work);
+
+	rtnl_lock();
+	ieee80211_reconfig(local);
+	rtnl_unlock();
+}
+
+void ieee80211_restart_hw(struct ieee80211_hw *hw)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	/* use this reason, __ieee80211_resume will unblock it */
+	ieee80211_stop_queues_by_reason(hw,
+		IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+	schedule_work(&local->restart_work);
+}
+EXPORT_SYMBOL(ieee80211_restart_hw);
+
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 					const struct ieee80211_ops *ops)
 {
@@ -718,9 +678,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	 * +-------------------------+
 	 *
 	 */
-	priv_size = ((sizeof(struct ieee80211_local) +
-		      NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
-		    priv_data_len;
+	priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
 
 	wiphy = wiphy_new(&mac80211_config_ops, priv_size);
 
@@ -728,17 +686,16 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 		return NULL;
 
 	wiphy->privid = mac80211_wiphy_privid;
-	wiphy->max_scan_ssids = 4;
+
 	/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
 	wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
 			       sizeof(struct cfg80211_bss);
 
 	local = wiphy_priv(wiphy);
+
 	local->hw.wiphy = wiphy;
 
-	local->hw.priv = (char *)local +
-			 ((sizeof(struct ieee80211_local) +
-			   NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+	local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
 
 	BUG_ON(!ops->tx);
 	BUG_ON(!ops->start);
@@ -752,15 +709,14 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	/* set up some defaults */
 	local->hw.queues = 1;
 	local->hw.max_rates = 1;
-	local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
-	local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
-	local->hw.conf.long_frame_max_tx_count = 4;
-	local->hw.conf.short_frame_max_tx_count = 7;
+	local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+	local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
 	local->hw.conf.radio_enabled = true;
 	local->user_power_level = -1;
 
 	INIT_LIST_HEAD(&local->interfaces);
 	mutex_init(&local->iflist_mtx);
+	mutex_init(&local->scan_mtx);
 
 	spin_lock_init(&local->key_lock);
 
@@ -768,6 +724,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 
+	INIT_WORK(&local->restart_work, ieee80211_restart_work);
+
 	INIT_WORK(&local->dynamic_ps_enable_work,
 		  ieee80211_dynamic_ps_enable_work);
 	INIT_WORK(&local->dynamic_ps_disable_work,
@@ -821,7 +779,17 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	enum ieee80211_band band;
 	struct net_device *mdev;
 	struct ieee80211_master_priv *mpriv;
-	int channels, i, j;
+	int channels, i, j, max_bitrates;
+	bool supp_ht;
+	static const u32 cipher_suites[] = {
+		WLAN_CIPHER_SUITE_WEP40,
+		WLAN_CIPHER_SUITE_WEP104,
+		WLAN_CIPHER_SUITE_TKIP,
+		WLAN_CIPHER_SUITE_CCMP,
+
+		/* keep last -- depends on hw flags! */
+		WLAN_CIPHER_SUITE_AES_CMAC
+	};
 
 	/*
 	 * generic code guarantees at least one band,
@@ -829,18 +797,25 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	 * that hw.conf.channel is assigned
 	 */
 	channels = 0;
+	max_bitrates = 0;
+	supp_ht = false;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		struct ieee80211_supported_band *sband;
 
 		sband = local->hw.wiphy->bands[band];
-		if (sband && !local->oper_channel) {
+		if (!sband)
+			continue;
+		if (!local->oper_channel) {
 			/* init channel we're on */
 			local->hw.conf.channel =
-			local->oper_channel =
-			local->scan_channel = &sband->channels[0];
+			local->oper_channel = &sband->channels[0];
+			local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
 		}
-		if (sband)
-			channels += sband->n_channels;
+		channels += sband->n_channels;
+
+		if (max_bitrates < sband->n_bitrates)
+			max_bitrates = sband->n_bitrates;
+		supp_ht = supp_ht || sband->ht_cap.ht_supported;
 	}
 
 	local->int_scan_req.n_channels = channels;
@@ -860,6 +835,37 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
 		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 
+	/*
+	 * Calculate scan IE length -- we need this to alloc
+	 * memory and to subtract from the driver limit. It
+	 * includes the (extended) supported rates and HT
+	 * information -- SSID is the driver's responsibility.
+	 */
+	local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+	if (supp_ht)
+		local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
+
+	if (!local->ops->hw_scan) {
+		/* For hw_scan, driver needs to set these up. */
+		local->hw.wiphy->max_scan_ssids = 4;
+		local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+	}
+
+	/*
+	 * If the driver supports any scan IEs, then assume the
+	 * limit includes the IEs mac80211 will add, otherwise
+	 * leave it at zero and let the driver sort it out; we
+	 * still pass our IEs to the driver but userspace will
+	 * not be allowed to in that case.
+	 */
+	if (local->hw.wiphy->max_scan_ie_len)
+		local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
+
+	local->hw.wiphy->cipher_suites = cipher_suites;
+	local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+	if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
+		local->hw.wiphy->n_cipher_suites--;
+
 	result = wiphy_register(local->hw.wiphy);
 	if (result < 0)
 		goto fail_wiphy_register;
@@ -898,9 +904,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 
 	debugfs_hw_add(local);
 
-	if (local->hw.conf.beacon_int < 10)
-		local->hw.conf.beacon_int = 100;
-
 	if (local->hw.max_listen_interval == 0)
 		local->hw.max_listen_interval = 1;
 
@@ -965,25 +968,38 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		}
 	}
 
+	local->network_latency_notifier.notifier_call =
+		ieee80211_max_network_latency;
+	result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
+				     &local->network_latency_notifier);
+
+	if (result) {
+		rtnl_lock();
+		goto fail_pm_qos;
+	}
+
 	return 0;
 
-fail_rate:
+ fail_pm_qos:
+	ieee80211_led_exit(local);
+	ieee80211_remove_interfaces(local);
+ fail_rate:
 	unregister_netdevice(local->mdev);
 	local->mdev = NULL;
-fail_dev:
+ fail_dev:
 	rtnl_unlock();
 	ieee80211_wep_free(local);
-fail_wep:
+ fail_wep:
 	sta_info_stop(local);
-fail_sta_info:
+ fail_sta_info:
 	debugfs_hw_del(local);
 	destroy_workqueue(local->hw.workqueue);
-fail_workqueue:
+ fail_workqueue:
 	if (local->mdev)
 		free_netdev(local->mdev);
-fail_mdev_alloc:
+ fail_mdev_alloc:
 	wiphy_unregister(local->hw.wiphy);
-fail_wiphy_register:
+ fail_wiphy_register:
 	kfree(local->int_scan_req.channels);
 	return result;
 }
@@ -996,6 +1012,9 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 	tasklet_kill(&local->tx_pending_tasklet);
 	tasklet_kill(&local->tasklet);
 
+	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
+			       &local->network_latency_notifier);
+
 	rtnl_lock();
 
 	/*
@@ -1038,6 +1057,7 @@ void ieee80211_free_hw(struct ieee80211_hw *hw)
 	struct ieee80211_local *local = hw_to_local(hw);
 
 	mutex_destroy(&local->iflist_mtx);
+	mutex_destroy(&local->scan_mtx);
 
 	wiphy_free(local->hw.wiphy);
 }
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9a3e5de0410..fc712e60705 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -21,6 +21,9 @@
 #define CAPAB_OFFSET 17
 #define ACCEPT_PLINKS 0x80
 
+#define TMR_RUNNING_HK	0
+#define TMR_RUNNING_MP	1
+
 int mesh_allocated;
 static struct kmem_cache *rm_cache;
 
@@ -45,6 +48,12 @@ static void ieee80211_mesh_housekeeping_timer(unsigned long data)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 
 	ifmsh->housekeeping = true;
+
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
+		return;
+	}
+
 	queue_work(local->hw.workqueue, &ifmsh->work);
 }
 
@@ -343,6 +352,11 @@ static void ieee80211_mesh_path_timer(unsigned long data)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct ieee80211_local *local = sdata->local;
 
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+		return;
+	}
+
 	queue_work(local->hw.workqueue, &ifmsh->work);
 }
 
@@ -417,13 +431,39 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
 
 	free_plinks = mesh_plink_availables(sdata);
 	if (free_plinks != sdata->u.mesh.accepting_plinks)
-		ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
 
 	ifmsh->housekeeping = false;
 	mod_timer(&ifmsh->housekeeping_timer,
 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
 }
 
+#ifdef CONFIG_PM
+void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	/* might restart the timer but that doesn't matter */
+	cancel_work_sync(&ifmsh->work);
+
+	/* use atomic bitops in case both timers fire at the same time */
+
+	if (del_timer_sync(&ifmsh->housekeeping_timer))
+		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
+	if (del_timer_sync(&ifmsh->mesh_path_timer))
+		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+}
+
+void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
+		add_timer(&ifmsh->housekeeping_timer);
+	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
+		add_timer(&ifmsh->mesh_path_timer);
+}
+#endif
 
 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 {
@@ -432,8 +472,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 
 	ifmsh->housekeeping = true;
 	queue_work(local->hw.workqueue, &ifmsh->work);
-	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
-				   IEEE80211_IFCC_BEACON_ENABLED);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
+						BSS_CHANGED_BEACON_ENABLED);
 }
 
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index d891d7ddccd..c7d72819cdd 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -191,12 +191,8 @@ struct mesh_rmc {
 #define PLINK_CATEGORY		30
 #define MESH_PATH_SEL_CATEGORY	32
 
-/* Mesh Header Flags */
-#define IEEE80211S_FLAGS_AE	0x3
-
 /* Public interfaces */
 /* Various */
-int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
 		struct ieee80211_sub_if_data *sdata);
 int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
@@ -267,6 +263,8 @@ void mesh_path_timer(unsigned long data);
 void mesh_path_flush_by_nexthop(struct sta_info *sta);
 void mesh_path_discard_frame(struct sk_buff *skb,
 		struct ieee80211_sub_if_data *sdata);
+void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata);
+void mesh_path_restart(struct ieee80211_sub_if_data *sdata);
 
 #ifdef CONFIG_MAC80211_MESH
 extern int mesh_allocated;
@@ -294,10 +292,20 @@ static inline void mesh_path_activate(struct mesh_path *mpath)
 
 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local);
 
+void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata);
+void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata);
+void mesh_plink_quiesce(struct sta_info *sta);
+void mesh_plink_restart(struct sta_info *sta);
 #else
 #define mesh_allocated	0
 static inline void
 ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {}
+static inline void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
+{}
+static inline void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
+{}
+static inline void mesh_plink_quiesce(struct sta_info *sta) {}
+static inline void mesh_plink_restart(struct sta_info *sta) {}
 #endif
 
 #endif /* IEEE80211S_H */
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 60b35accda9..003cb470ac8 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -836,8 +836,14 @@ void mesh_path_timer(unsigned long data)
 	mpath = rcu_dereference(mpath);
 	if (!mpath)
 		goto endmpathtimer;
-	spin_lock_bh(&mpath->state_lock);
 	sdata = mpath->sdata;
+
+	if (sdata->local->quiescing) {
+		rcu_read_unlock();
+		return;
+	}
+
+	spin_lock_bh(&mpath->state_lock);
 	if (mpath->flags & MESH_PATH_RESOLVED ||
 			(!(mpath->flags & MESH_PATH_RESOLVING)))
 		mpath->flags &= ~(MESH_PATH_RESOLVING | MESH_PATH_RESOLVED);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index a8bbdeca013..cb14253587f 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -266,6 +266,11 @@ static void mesh_plink_timer(unsigned long data)
 	 */
 	sta = (struct sta_info *) data;
 
+	if (sta->sdata->local->quiescing) {
+		sta->plink_timer_was_running = true;
+		return;
+	}
+
 	spin_lock_bh(&sta->lock);
 	if (sta->ignore_plink_timer) {
 		sta->ignore_plink_timer = false;
@@ -322,6 +327,22 @@ static void mesh_plink_timer(unsigned long data)
 	}
 }
 
+#ifdef CONFIG_PM
+void mesh_plink_quiesce(struct sta_info *sta)
+{
+	if (del_timer_sync(&sta->plink_timer))
+		sta->plink_timer_was_running = true;
+}
+
+void mesh_plink_restart(struct sta_info *sta)
+{
+	if (sta->plink_timer_was_running) {
+		add_timer(&sta->plink_timer);
+		sta->plink_timer_was_running = false;
+	}
+}
+#endif
+
 static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout)
 {
 	sta->plink_timer.expires = jiffies + (HZ * timeout / 1000);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 132938b073d..d779c57a822 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -17,10 +17,13 @@
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
+#include <linux/pm_qos_params.h>
+#include <linux/crc32.h>
 #include <net/mac80211.h>
 #include <asm/unaligned.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "led.h"
 
@@ -30,9 +33,13 @@
 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
 #define IEEE80211_ASSOC_MAX_TRIES 3
 #define IEEE80211_MONITORING_INTERVAL (2 * HZ)
+#define IEEE80211_PROBE_WAIT (HZ / 5)
 #define IEEE80211_PROBE_IDLE_TIME (60 * HZ)
 #define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
 
+#define TMR_RUNNING_TIMER	0
+#define TMR_RUNNING_CHANSW	1
+
 /* utils */
 static int ecw2cw(int ecw)
 {
@@ -80,6 +87,92 @@ static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
 	return count;
 }
 
+/*
+ * ieee80211_enable_ht should be called only after the operating band
+ * has been determined as ht configuration depends on the hw's
+ * HT abilities for a specific band.
+ */
+static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
+			       struct ieee80211_ht_info *hti,
+			       u16 ap_ht_cap_flags)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct sta_info *sta;
+	u32 changed = 0;
+	u16 ht_opmode;
+	bool enable_ht = true, ht_changed;
+	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	/* HT is not supported */
+	if (!sband->ht_cap.ht_supported)
+		enable_ht = false;
+
+	/* check that channel matches the right operating channel */
+	if (local->hw.conf.channel->center_freq !=
+	    ieee80211_channel_to_frequency(hti->control_chan))
+		enable_ht = false;
+
+	if (enable_ht) {
+		channel_type = NL80211_CHAN_HT20;
+
+		if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+		    (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+		    (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
+			switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				if (!(local->hw.conf.channel->flags &
+				    IEEE80211_CHAN_NO_HT40PLUS))
+					channel_type = NL80211_CHAN_HT40PLUS;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				if (!(local->hw.conf.channel->flags &
+				    IEEE80211_CHAN_NO_HT40MINUS))
+					channel_type = NL80211_CHAN_HT40MINUS;
+				break;
+			}
+		}
+	}
+
+	ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
+		     channel_type != local->hw.conf.channel_type;
+
+	local->oper_channel_type = channel_type;
+
+	if (ht_changed) {
+                /* channel_type change automatically detected */
+		ieee80211_hw_config(local, 0);
+
+		rcu_read_lock();
+
+		sta = sta_info_get(local, ifmgd->bssid);
+		if (sta)
+			rate_control_rate_update(local, sband, sta,
+						 IEEE80211_RC_HT_CHANGED);
+
+		rcu_read_unlock();
+        }
+
+	/* disable HT */
+	if (!enable_ht)
+		return 0;
+
+	ht_opmode = le16_to_cpu(hti->operation_mode);
+
+	/* if bss configuration changed store the new one */
+	if (!sdata->ht_opmode_valid ||
+	    sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+		changed |= BSS_CHANGED_HT;
+		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
+		sdata->ht_opmode_valid = true;
+	}
+
+	return changed;
+}
+
 /* frame sending functions */
 
 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
@@ -263,13 +356,13 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 
 		switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
 		case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-			if (flags & IEEE80211_CHAN_NO_FAT_ABOVE) {
+			if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
 				cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 				cap &= ~IEEE80211_HT_CAP_SGI_40;
 			}
 			break;
 		case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-			if (flags & IEEE80211_CHAN_NO_FAT_BELOW) {
+			if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
 				cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 				cap &= ~IEEE80211_HT_CAP_SGI_40;
 			}
@@ -325,6 +418,10 @@ static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
 	/* u.deauth.reason_code == u.disassoc.reason_code */
 	mgmt->u.deauth.reason_code = cpu_to_le16(reason);
 
+	if (stype == IEEE80211_STYPE_DEAUTH)
+		cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, skb->len);
+	else
+		cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, skb->len);
 	ieee80211_tx_skb(sdata, skb, ifmgd->flags & IEEE80211_STA_MFP_ENABLED);
 }
 
@@ -359,6 +456,277 @@ void ieee80211_send_pspoll(struct ieee80211_local *local,
 	ieee80211_tx_skb(sdata, skb, 0);
 }
 
+void ieee80211_send_nullfunc(struct ieee80211_local *local,
+			     struct ieee80211_sub_if_data *sdata,
+			     int powersave)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr *nullfunc;
+	__le16 fc;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24);
+	if (!skb) {
+		printk(KERN_DEBUG "%s: failed to allocate buffer for nullfunc "
+		       "frame\n", sdata->dev->name);
+		return;
+	}
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24);
+	memset(nullfunc, 0, 24);
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
+			 IEEE80211_FCTL_TODS);
+	if (powersave)
+		fc |= cpu_to_le16(IEEE80211_FCTL_PM);
+	nullfunc->frame_control = fc;
+	memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
+	memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN);
+	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
+
+	ieee80211_tx_skb(sdata, skb, 0);
+}
+
+/* spectrum management related things */
+static void ieee80211_chswitch_work(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata =
+		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
+	struct ieee80211_bss *bss;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (!netif_running(sdata->dev))
+		return;
+
+	bss = ieee80211_rx_bss_get(sdata->local, ifmgd->bssid,
+				   sdata->local->hw.conf.channel->center_freq,
+				   ifmgd->ssid, ifmgd->ssid_len);
+	if (!bss)
+		goto exit;
+
+	sdata->local->oper_channel = sdata->local->csa_channel;
+	/* XXX: shouldn't really modify cfg80211-owned data! */
+	if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL))
+		bss->cbss.channel = sdata->local->oper_channel;
+
+	ieee80211_rx_bss_put(sdata->local, bss);
+exit:
+	ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
+	ieee80211_wake_queues_by_reason(&sdata->local->hw,
+					IEEE80211_QUEUE_STOP_REASON_CSA);
+}
+
+static void ieee80211_chswitch_timer(unsigned long data)
+{
+	struct ieee80211_sub_if_data *sdata =
+		(struct ieee80211_sub_if_data *) data;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (sdata->local->quiescing) {
+		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
+		return;
+	}
+
+	queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
+}
+
+void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
+				      struct ieee80211_channel_sw_ie *sw_elem,
+				      struct ieee80211_bss *bss)
+{
+	struct ieee80211_channel *new_ch;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
+
+	if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATED)
+		return;
+
+	if (sdata->local->sw_scanning || sdata->local->hw_scanning)
+		return;
+
+	/* Disregard subsequent beacons if we are already running a timer
+	   processing a CSA */
+
+	if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
+		return;
+
+	new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
+	if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED)
+		return;
+
+	sdata->local->csa_channel = new_ch;
+
+	if (sw_elem->count <= 1) {
+		queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
+	} else {
+		ieee80211_stop_queues_by_reason(&sdata->local->hw,
+					IEEE80211_QUEUE_STOP_REASON_CSA);
+		ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
+		mod_timer(&ifmgd->chswitch_timer,
+			  jiffies +
+			  msecs_to_jiffies(sw_elem->count *
+					   bss->cbss.beacon_interval));
+	}
+}
+
+static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
+					u16 capab_info, u8 *pwr_constr_elem,
+					u8 pwr_constr_elem_len)
+{
+	struct ieee80211_conf *conf = &sdata->local->hw.conf;
+
+	if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT))
+		return;
+
+	/* Power constraint IE length should be 1 octet */
+	if (pwr_constr_elem_len != 1)
+		return;
+
+	if ((*pwr_constr_elem <= conf->channel->max_power) &&
+	    (*pwr_constr_elem != sdata->local->power_constr_level)) {
+		sdata->local->power_constr_level = *pwr_constr_elem;
+		ieee80211_hw_config(sdata->local, 0);
+	}
+}
+
+/* powersave */
+static void ieee80211_enable_ps(struct ieee80211_local *local,
+				struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_conf *conf = &local->hw.conf;
+
+	/*
+	 * If we are scanning right now then the parameters will
+	 * take effect when scan finishes.
+	 */
+	if (local->hw_scanning || local->sw_scanning)
+		return;
+
+	if (conf->dynamic_ps_timeout > 0 &&
+	    !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
+		mod_timer(&local->dynamic_ps_timer, jiffies +
+			  msecs_to_jiffies(conf->dynamic_ps_timeout));
+	} else {
+		if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+			ieee80211_send_nullfunc(local, sdata, 1);
+		conf->flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+}
+
+static void ieee80211_change_ps(struct ieee80211_local *local)
+{
+	struct ieee80211_conf *conf = &local->hw.conf;
+
+	if (local->ps_sdata) {
+		ieee80211_enable_ps(local, local->ps_sdata);
+	} else if (conf->flags & IEEE80211_CONF_PS) {
+		conf->flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+		del_timer_sync(&local->dynamic_ps_timer);
+		cancel_work_sync(&local->dynamic_ps_enable_work);
+	}
+}
+
+/* need to hold RTNL or interface lock */
+void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
+{
+	struct ieee80211_sub_if_data *sdata, *found = NULL;
+	int count = 0;
+
+	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
+		local->ps_sdata = NULL;
+		return;
+	}
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		if (sdata->vif.type != NL80211_IFTYPE_STATION)
+			continue;
+		found = sdata;
+		count++;
+	}
+
+	if (count == 1 && found->u.mgd.powersave &&
+	    (found->u.mgd.flags & IEEE80211_STA_ASSOCIATED) &&
+	    !(found->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL)) {
+		s32 beaconint_us;
+
+		if (latency < 0)
+			latency = pm_qos_requirement(PM_QOS_NETWORK_LATENCY);
+
+		beaconint_us = ieee80211_tu_to_usec(
+					found->vif.bss_conf.beacon_int);
+
+		if (beaconint_us > latency) {
+			local->ps_sdata = NULL;
+		} else {
+			u8 dtimper = found->vif.bss_conf.dtim_period;
+			int maxslp = 1;
+
+			if (dtimper > 1)
+				maxslp = min_t(int, dtimper,
+						    latency / beaconint_us);
+
+			local->hw.conf.max_sleep_period = maxslp;
+			local->ps_sdata = found;
+		}
+	} else {
+		local->ps_sdata = NULL;
+	}
+
+	ieee80211_change_ps(local);
+}
+
+void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_disable_work);
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+
+	ieee80211_wake_queues_by_reason(&local->hw,
+					IEEE80211_QUEUE_STOP_REASON_PS);
+}
+
+void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_enable_work);
+	struct ieee80211_sub_if_data *sdata = local->ps_sdata;
+
+	/* can only happen when PS was just disabled anyway */
+	if (!sdata)
+		return;
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS)
+		return;
+
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+		ieee80211_send_nullfunc(local, sdata, 1);
+
+	local->hw.conf.flags |= IEEE80211_CONF_PS;
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+}
+
+void ieee80211_dynamic_ps_timer(unsigned long data)
+{
+	struct ieee80211_local *local = (void *) data;
+
+	if (local->quiescing)
+		return;
+
+	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
+}
+
 /* MLME */
 static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 				     struct ieee80211_if_managed *ifmgd,
@@ -424,41 +792,16 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d "
 		       "cWmin=%d cWmax=%d txop=%d\n",
-		       local->mdev->name, queue, aci, acm, params.aifs, params.cw_min,
-		       params.cw_max, params.txop);
+		       wiphy_name(local->hw.wiphy), queue, aci, acm,
+		       params.aifs, params.cw_min, params.cw_max, params.txop);
 #endif
-		if (local->ops->conf_tx &&
-		    local->ops->conf_tx(local_to_hw(local), queue, &params)) {
+		if (drv_conf_tx(local, queue, &params) && local->ops->conf_tx)
 			printk(KERN_DEBUG "%s: failed to set TX queue "
-			       "parameters for queue %d\n", local->mdev->name, queue);
-		}
+			       "parameters for queue %d\n",
+			       wiphy_name(local->hw.wiphy), queue);
 	}
 }
 
-static bool ieee80211_check_tim(struct ieee802_11_elems *elems, u16 aid)
-{
-	u8 mask;
-	u8 index, indexn1, indexn2;
-	struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim;
-
-	if (unlikely(!tim || elems->tim_len < 4))
-		return false;
-
-	aid &= 0x3fff;
-	index = aid / 8;
-	mask  = 1 << (aid & 7);
-
-	indexn1 = tim->bitmap_ctrl & 0xfe;
-	indexn2 = elems->tim_len + indexn1 - 4;
-
-	if (index < indexn1 || index > indexn2)
-		return false;
-
-	index -= indexn1;
-
-	return !!(tim->virtual_map[index] & mask);
-}
-
 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
 					   u16 capab, bool erp_valid, u8 erp)
 {
@@ -610,6 +953,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
 		sdata->vif.bss_conf.dtim_period = bss->dtim_period;
 
+		bss_info_changed |= BSS_CHANGED_BEACON_INT;
 		bss_info_changed |= ieee80211_handle_bss_capability(sdata,
 			bss->cbss.capability, bss->has_erp_value, bss->erp_value);
 
@@ -632,20 +976,17 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	 * changed or not.
 	 */
 	bss_info_changed |= BSS_CHANGED_BASIC_RATES;
+
+	/* And the BSSID changed - we're associated now */
+	bss_info_changed |= BSS_CHANGED_BSSID;
+
 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
 
-	if (local->powersave) {
-		if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) &&
-		    local->hw.conf.dynamic_ps_timeout > 0) {
-			mod_timer(&local->dynamic_ps_timer, jiffies +
-				  msecs_to_jiffies(
-					local->hw.conf.dynamic_ps_timeout));
-		} else {
-			if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
-				ieee80211_send_nullfunc(local, sdata, 1);
-			conf->flags |= IEEE80211_CONF_PS;
-			ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-		}
+	/* will be same as sdata */
+	if (local->ps_sdata) {
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
 	}
 
 	netif_tx_start_all_queues(sdata->dev);
@@ -664,7 +1005,8 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
 		printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n",
 		       sdata->dev->name, ifmgd->bssid);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
-		ieee80211_sta_send_apinfo(sdata);
+		ieee80211_recalc_idle(local);
+		cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
 
 		/*
 		 * Most likely AP is not in the range so remove the
@@ -689,8 +1031,6 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
 
 	ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE;
 
-	set_bit(IEEE80211_STA_REQ_DIRECT_PROBE, &ifmgd->request);
-
 	/* Direct probe is sent to broadcast address as some APs
 	 * will not answer to direct packet in unassociated state.
 	 */
@@ -714,7 +1054,8 @@ static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata)
 		       " timed out\n",
 		       sdata->dev->name, ifmgd->bssid);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
-		ieee80211_sta_send_apinfo(sdata);
+		ieee80211_recalc_idle(local);
+		cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
 		ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
 				sdata->local->hw.conf.channel->center_freq,
 				ifmgd->ssid, ifmgd->ssid_len);
@@ -817,9 +1158,16 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	rcu_read_unlock();
 
+	ieee80211_set_wmm_default(sdata);
+
+	ieee80211_recalc_idle(local);
+
 	/* channel(_type) changes are handled by ieee80211_hw_config */
 	local->oper_channel_type = NL80211_CHAN_NO_HT;
 
+	/* on the next assoc, re-program HT parameters */
+	sdata->ht_opmode_valid = false;
+
 	local->power_constr_level = 0;
 
 	del_timer_sync(&local->dynamic_ps_timer);
@@ -831,6 +1179,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	}
 
 	ieee80211_hw_config(local, config_changed);
+
+	/* And the BSSID changed -- not very interesting here */
+	changed |= BSS_CHANGED_BSSID;
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	rcu_read_lock();
@@ -897,7 +1248,8 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
 		       " timed out\n",
 		       sdata->dev->name, ifmgd->bssid);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
-		ieee80211_sta_send_apinfo(sdata);
+		ieee80211_recalc_idle(local);
+		cfg80211_send_assoc_timeout(sdata->dev, ifmgd->bssid);
 		ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
 				sdata->local->hw.conf.channel->center_freq,
 				ifmgd->ssid, ifmgd->ssid_len);
@@ -917,6 +1269,7 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
 		printk(KERN_DEBUG "%s: mismatch in privacy configuration and "
 		       "mixed-cell disabled - abort association\n", sdata->dev->name);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+		ieee80211_recalc_idle(local);
 		return;
 	}
 
@@ -948,6 +1301,17 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
 			     u.mgd.beacon_loss_work);
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/*
+	 * The driver has already reported this event and we have
+	 * already sent a probe request. Maybe the AP died and the
+	 * driver keeps reporting until we disassociate... We have
+	 * to ignore that because otherwise we would continually
+	 * reset the timer and never check whether we received a
+	 * probe response!
+	 */
+	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
+		return;
+
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 	if (net_ratelimit()) {
 		printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
@@ -957,10 +1321,15 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
 #endif
 
 	ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+
+	mutex_lock(&sdata->local->iflist_mtx);
+	ieee80211_recalc_ps(sdata->local, -1);
+	mutex_unlock(&sdata->local->iflist_mtx);
+
 	ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 				 ifmgd->ssid_len, NULL, 0);
 
-	mod_timer(&ifmgd->timer, jiffies + IEEE80211_MONITORING_INTERVAL);
+	mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT);
 }
 
 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
@@ -977,6 +1346,7 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
+	unsigned long last_rx;
 	bool disassoc = false;
 
 	/* TODO: start monitoring current AP signal quality and number of
@@ -993,17 +1363,21 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
 		printk(KERN_DEBUG "%s: No STA entry for own AP %pM\n",
 		       sdata->dev->name, ifmgd->bssid);
 		disassoc = true;
-		goto unlock;
+		rcu_read_unlock();
+		goto out;
 	}
 
+	last_rx = sta->last_rx;
+	rcu_read_unlock();
+
 	if ((ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) &&
-	    time_after(jiffies, sta->last_rx + IEEE80211_MONITORING_INTERVAL)) {
+	    time_after(jiffies, last_rx + IEEE80211_PROBE_WAIT)) {
 		printk(KERN_DEBUG "%s: no probe response from AP %pM "
 		       "- disassociating\n",
 		       sdata->dev->name, ifmgd->bssid);
 		disassoc = true;
 		ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
-		goto unlock;
+		goto out;
 	}
 
 	/*
@@ -1022,27 +1396,31 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
 		}
 #endif
 		ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
 		ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 					 ifmgd->ssid_len, NULL, 0);
-		goto unlock;
-
+		mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT);
+		goto out;
 	}
 
-	if (time_after(jiffies, sta->last_rx + IEEE80211_PROBE_IDLE_TIME)) {
+	if (time_after(jiffies, last_rx + IEEE80211_PROBE_IDLE_TIME)) {
 		ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
 		ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 					 ifmgd->ssid_len, NULL, 0);
 	}
 
- unlock:
-	rcu_read_unlock();
-
-	if (disassoc)
+ out:
+	if (!disassoc)
+		mod_timer(&ifmgd->timer,
+			  jiffies + IEEE80211_MONITORING_INTERVAL);
+	else
 		ieee80211_set_disassoc(sdata, true, true,
 					WLAN_REASON_PREV_AUTH_NOT_VALID);
-	else
-		mod_timer(&ifmgd->timer, jiffies +
-				      IEEE80211_MONITORING_INTERVAL);
 }
 
 
@@ -1055,6 +1433,7 @@ static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata)
 	if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
 		/* Wait for SME to request association */
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+		ieee80211_recalc_idle(sdata->local);
 	} else
 		ieee80211_associate(sdata);
 }
@@ -1187,7 +1566,7 @@ static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_set_disassoc(sdata, true, false, 0);
 	ifmgd->flags &= ~IEEE80211_STA_AUTHENTICATED;
-	cfg80211_send_rx_deauth(sdata->dev, (u8 *) mgmt, len);
+	cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, len);
 }
 
 
@@ -1218,7 +1597,7 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 	}
 
 	ieee80211_set_disassoc(sdata, false, false, reason_code);
-	cfg80211_send_rx_disassoc(sdata->dev, (u8 *) mgmt, len);
+	cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, len);
 }
 
 
@@ -1287,6 +1666,12 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		 * association next time. This works around some broken APs
 		 * which do not correctly reject reassociation requests. */
 		ifmgd->flags &= ~IEEE80211_STA_PREV_BSSID_SET;
+		cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len);
+		if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
+			/* Wait for SME to decide what to do next */
+			ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+			ieee80211_recalc_idle(local);
+		}
 		return;
 	}
 
@@ -1340,8 +1725,9 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	 *	  to between the sta_info_alloc() and sta_info_insert() above.
 	 */
 
-	set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP |
-			   WLAN_STA_AUTHORIZED);
+	set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP);
+	if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
+		set_sta_flags(sta, WLAN_STA_AUTHORIZED);
 
 	rates = 0;
 	basic_rates = 0;
@@ -1421,6 +1807,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	if (elems.wmm_param)
 		ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
 					 elems.wmm_param_len);
+	else
+		ieee80211_set_wmm_default(sdata);
 
 	if (elems.ht_info_elem && elems.wmm_param &&
 	    (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) &&
@@ -1476,7 +1864,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 	    (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN) == 0)) {
 		struct ieee80211_channel_sw_ie *sw_elem =
 			(struct ieee80211_channel_sw_ie *)elems->ch_switch_elem;
-		ieee80211_process_chanswitch(sdata, sw_elem, bss);
+		ieee80211_sta_process_chanswitch(sdata, sw_elem, bss);
 	}
 
 	ieee80211_rx_bss_put(local, bss);
@@ -1507,57 +1895,98 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
 
 	/* direct probe may be part of the association flow */
-	if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE,
-			       &ifmgd->request)) {
+	if (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE) {
 		printk(KERN_DEBUG "%s direct probe responded\n",
 		       sdata->dev->name);
 		ieee80211_authenticate(sdata);
 	}
 
-	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
+	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
 		ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&sdata->local->iflist_mtx);
+		ieee80211_recalc_ps(sdata->local, -1);
+		mutex_unlock(&sdata->local->iflist_mtx);
+	}
 }
 
+/*
+ * This is the canonical list of information elements we care about,
+ * the filter code also gives us all changes to the Microsoft OUI
+ * (00:50:F2) vendor IE which is used for WMM which we need to track.
+ *
+ * We implement beacon filtering in software since that means we can
+ * avoid processing the frame here and in cfg80211, and userspace
+ * will not be able to tell whether the hardware supports it or not.
+ *
+ * XXX: This list needs to be dynamic -- userspace needs to be able to
+ *	add items it requires. It also needs to be able to tell us to
+ *	look out for other vendor IEs.
+ */
+static const u64 care_about_ies =
+	(1ULL << WLAN_EID_COUNTRY) |
+	(1ULL << WLAN_EID_ERP_INFO) |
+	(1ULL << WLAN_EID_CHANNEL_SWITCH) |
+	(1ULL << WLAN_EID_PWR_CONSTRAINT) |
+	(1ULL << WLAN_EID_HT_CAPABILITY) |
+	(1ULL << WLAN_EID_HT_INFORMATION);
+
 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 				     struct ieee80211_mgmt *mgmt,
 				     size_t len,
 				     struct ieee80211_rx_status *rx_status)
 {
-	struct ieee80211_if_managed *ifmgd;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	size_t baselen;
 	struct ieee802_11_elems elems;
 	struct ieee80211_local *local = sdata->local;
 	u32 changed = 0;
-	bool erp_valid, directed_tim;
+	bool erp_valid, directed_tim = false;
 	u8 erp_value = 0;
+	u32 ncrc;
 
 	/* Process beacon from the current BSS */
 	baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
 	if (baselen > len)
 		return;
 
-	ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
-
-	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, true);
-
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+	if (rx_status->freq != local->hw.conf.channel->center_freq)
 		return;
 
-	ifmgd = &sdata->u.mgd;
-
 	if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED) ||
 	    memcmp(ifmgd->bssid, mgmt->bssid, ETH_ALEN) != 0)
 		return;
 
-	if (rx_status->freq != local->hw.conf.channel->center_freq)
-		return;
+	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: cancelling probereq poll due "
+			       "to a received beacon\n", sdata->dev->name);
+		}
+#endif
+		ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
+	}
 
-	ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
-				 elems.wmm_param_len);
+	ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
+	ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
+					  len - baselen, &elems,
+					  care_about_ies, ncrc);
 
-	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
-		directed_tim = ieee80211_check_tim(&elems, ifmgd->aid);
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+		directed_tim = ieee80211_check_tim(elems.tim, elems.tim_len,
+						   ifmgd->aid);
 
+	if (ncrc != ifmgd->beacon_crc) {
+		ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems,
+				      true);
+
+		ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
+					 elems.wmm_param_len);
+	}
+
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
 		if (directed_tim) {
 			if (local->hw.conf.dynamic_ps_timeout > 0) {
 				local->hw.conf.flags &= ~IEEE80211_CONF_PS;
@@ -1580,6 +2009,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
+	if (ncrc == ifmgd->beacon_crc)
+		return;
+	ifmgd->beacon_crc = ncrc;
+
 	if (elems.erp_info && elems.erp_info_len >= 1) {
 		erp_valid = true;
 		erp_value = elems.erp_info[0];
@@ -1714,6 +2147,11 @@ static void ieee80211_sta_timer(unsigned long data)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
 
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
+		return;
+	}
+
 	set_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request);
 	queue_work(local->hw.workqueue, &ifmgd->work);
 }
@@ -1723,10 +2161,8 @@ static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
 
-	if (local->ops->reset_tsf) {
-		/* Reset own TSF to allow time synchronization work. */
-		local->ops->reset_tsf(local_to_hw(local));
-	}
+	/* Reset own TSF to allow time synchronization work. */
+	drv_reset_tsf(local);
 
 	ifmgd->wmm_last_param_set = -1; /* allow any WMM update */
 
@@ -1814,25 +2250,18 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
 		return 0;
 	} else {
 		if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) {
+
 			ifmgd->assoc_scan_tries++;
-			/* XXX maybe racy? */
-			if (local->scan_req)
-				return -1;
-			memcpy(local->int_scan_req.ssids[0].ssid,
-			       ifmgd->ssid, IEEE80211_MAX_SSID_LEN);
-			if (ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL)
-				local->int_scan_req.ssids[0].ssid_len = 0;
-			else
-				local->int_scan_req.ssids[0].ssid_len = ifmgd->ssid_len;
 
-			if (ieee80211_start_scan(sdata, &local->int_scan_req))
-				ieee80211_scan_failed(local);
+			ieee80211_request_internal_scan(sdata, ifmgd->ssid,
+							ssid_len);
 
 			ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE;
 			set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
 		} else {
 			ifmgd->assoc_scan_tries = 0;
 			ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+			ieee80211_recalc_idle(local);
 		}
 	}
 	return -1;
@@ -1855,6 +2284,17 @@ static void ieee80211_sta_work(struct work_struct *work)
 
 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
 		return;
+
+	/*
+	 * Nothing should have been stuffed into the workqueue during
+	 * the suspend->resume cycle. If this WARN is seen then there
+	 * is a bug with either the driver suspend or something in
+	 * mac80211 stuffing into the workqueue which we haven't yet
+	 * cleared during mac80211's suspend cycle.
+	 */
+	if (WARN_ON(local->suspended))
+		return;
+
 	ifmgd = &sdata->u.mgd;
 
 	while ((skb = skb_dequeue(&ifmgd->skb_queue)))
@@ -1864,14 +2304,8 @@ static void ieee80211_sta_work(struct work_struct *work)
 	    ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE &&
 	    ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE &&
 	    test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request)) {
-		/*
-		 * The call to ieee80211_start_scan can fail but ieee80211_request_scan
-		 * (which queued ieee80211_sta_work) did not return an error. Thus, call
-		 * ieee80211_scan_failed here if ieee80211_start_scan fails in order to
-		 * notify the scan requester.
-		 */
-		if (ieee80211_start_scan(sdata, local->scan_req))
-			ieee80211_scan_failed(local);
+		queue_delayed_work(local->hw.workqueue, &local->scan_work,
+				   round_jiffies_relative(0));
 		return;
 	}
 
@@ -1882,6 +2316,8 @@ static void ieee80211_sta_work(struct work_struct *work)
 	} else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request))
 		return;
 
+	ieee80211_recalc_idle(local);
+
 	switch (ifmgd->state) {
 	case IEEE80211_STA_MLME_DISABLED:
 		break;
@@ -1926,10 +2362,43 @@ static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
 	}
 }
 
+#ifdef CONFIG_PM
+void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	/*
+	 * we need to use atomic bitops for the running bits
+	 * only because both timers might fire at the same
+	 * time -- the code here is properly synchronised.
+	 */
+
+	cancel_work_sync(&ifmgd->work);
+	cancel_work_sync(&ifmgd->beacon_loss_work);
+	if (del_timer_sync(&ifmgd->timer))
+		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
+
+	cancel_work_sync(&ifmgd->chswitch_work);
+	if (del_timer_sync(&ifmgd->chswitch_timer))
+		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
+}
+
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
+		add_timer(&ifmgd->timer);
+	if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
+		add_timer(&ifmgd->chswitch_timer);
+}
+#endif
+
 /* interface setup */
 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd;
+	u32 hw_flags;
 
 	ifmgd = &sdata->u.mgd;
 	INIT_WORK(&ifmgd->work, ieee80211_sta_work);
@@ -1949,6 +2418,13 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 		IEEE80211_STA_AUTO_CHANNEL_SEL;
 	if (sdata->local->hw.queues >= 4)
 		ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
+
+	hw_flags = sdata->local->hw.flags;
+
+	if (hw_flags & IEEE80211_HW_SUPPORTS_PS) {
+		ifmgd->powersave = CONFIG_MAC80211_DEFAULT_PS_VALUE;
+		sdata->local->hw.conf.dynamic_ps_timeout = 500;
+	}
 }
 
 /* configuration hooks */
@@ -2032,13 +2508,6 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
 		ifmgd->flags &= ~IEEE80211_STA_BSSID_SET;
 	}
 
-	if (netif_running(sdata->dev)) {
-		if (ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID)) {
-			printk(KERN_DEBUG "%s: Failed to config new BSSID to "
-			       "the low-level driver\n", sdata->dev->name);
-		}
-	}
-
 	return ieee80211_sta_commit(sdata);
 }
 
@@ -2047,6 +2516,13 @@ int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	if (len == 0 && ifmgd->extra_ie_len == 0)
+		return -EALREADY;
+
+	if (len == ifmgd->extra_ie_len && ifmgd->extra_ie &&
+	    memcmp(ifmgd->extra_ie, ie, len) == 0)
+		return -EALREADY;
+
 	kfree(ifmgd->extra_ie);
 	if (len == 0) {
 		ifmgd->extra_ie = NULL;
@@ -2068,9 +2544,6 @@ int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason
 	printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
 	       sdata->dev->name, reason);
 
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return -EINVAL;
-
 	ieee80211_set_disassoc(sdata, true, true, reason);
 	return 0;
 }
@@ -2082,9 +2555,6 @@ int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason)
 	printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
 	       sdata->dev->name, reason);
 
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return -EINVAL;
-
 	if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED))
 		return -ENOLINK;
 
@@ -2104,75 +2574,17 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
 	rcu_read_unlock();
 }
 
-void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
+int ieee80211_max_network_latency(struct notifier_block *nb,
+				  unsigned long data, void *dummy)
 {
+	s32 latency_usec = (s32) data;
 	struct ieee80211_local *local =
-		container_of(work, struct ieee80211_local,
-			     dynamic_ps_disable_work);
-
-	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
-		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
-		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-	}
-
-	ieee80211_wake_queues_by_reason(&local->hw,
-					IEEE80211_QUEUE_STOP_REASON_PS);
-}
-
-void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
-{
-	struct ieee80211_local *local =
-		container_of(work, struct ieee80211_local,
-			     dynamic_ps_enable_work);
-	/* XXX: using scan_sdata is completely broken! */
-	struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-
-	if (local->hw.conf.flags & IEEE80211_CONF_PS)
-		return;
-
-	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
-		ieee80211_send_nullfunc(local, sdata, 1);
-
-	local->hw.conf.flags |= IEEE80211_CONF_PS;
-	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-}
-
-void ieee80211_dynamic_ps_timer(unsigned long data)
-{
-	struct ieee80211_local *local = (void *) data;
-
-	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
-}
-
-void ieee80211_send_nullfunc(struct ieee80211_local *local,
-			     struct ieee80211_sub_if_data *sdata,
-			     int powersave)
-{
-	struct sk_buff *skb;
-	struct ieee80211_hdr *nullfunc;
-	__le16 fc;
+		container_of(nb, struct ieee80211_local,
+			     network_latency_notifier);
 
-	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
-		return;
-
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24);
-	if (!skb) {
-		printk(KERN_DEBUG "%s: failed to allocate buffer for nullfunc "
-		       "frame\n", sdata->dev->name);
-		return;
-	}
-	skb_reserve(skb, local->hw.extra_tx_headroom);
+	mutex_lock(&local->iflist_mtx);
+	ieee80211_recalc_ps(local, latency_usec);
+	mutex_unlock(&local->iflist_mtx);
 
-	nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24);
-	memset(nullfunc, 0, 24);
-	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
-			 IEEE80211_FCTL_TODS);
-	if (powersave)
-		fc |= cpu_to_le16(IEEE80211_FCTL_PM);
-	nullfunc->frame_control = fc;
-	memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
-	memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN);
-	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
-
-	ieee80211_tx_skb(sdata, skb, 0);
+	return 0;
 }
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 81985d27cbd..7a549f9deb9 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -2,6 +2,8 @@
 #include <net/rtnetlink.h>
 
 #include "ieee80211_i.h"
+#include "mesh.h"
+#include "driver-ops.h"
 #include "led.h"
 
 int __ieee80211_suspend(struct ieee80211_hw *hw)
@@ -12,11 +14,30 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 	struct sta_info *sta;
 	unsigned long flags;
 
+	ieee80211_scan_cancel(local);
+
 	ieee80211_stop_queues_by_reason(hw,
 			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 
+	/* flush out all packets */
+	synchronize_net();
+
+	local->quiescing = true;
+	/* make quiescing visible to timers everywhere */
+	mb();
+
 	flush_workqueue(local->hw.workqueue);
 
+	/* Don't try to run timers while suspended. */
+	del_timer_sync(&local->sta_cleanup);
+
+	 /*
+	 * Note that this particular timer doesn't need to be
+	 * restarted at resume.
+	 */
+	cancel_work_sync(&local->dynamic_ps_enable_work);
+	del_timer_sync(&local->dynamic_ps_timer);
+
 	/* disable keys */
 	list_for_each_entry(sdata, &local->interfaces, list)
 		ieee80211_disable_keys(sdata);
@@ -34,157 +55,70 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 
 	rcu_read_unlock();
 
-	/* remove STAs */
-	if (local->ops->sta_notify) {
-		spin_lock_irqsave(&local->sta_lock, flags);
-		list_for_each_entry(sta, &local->sta_list, list) {
-			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-				sdata = container_of(sdata->bss,
-					     struct ieee80211_sub_if_data,
-					     u.ap);
-
-			local->ops->sta_notify(hw, &sdata->vif,
-				STA_NOTIFY_REMOVE, &sta->sta);
-		}
-		spin_unlock_irqrestore(&local->sta_lock, flags);
-	}
-
-	/* remove all interfaces */
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
-		    netif_running(sdata->dev)) {
-			conf.vif = &sdata->vif;
-			conf.type = sdata->vif.type;
-			conf.mac_addr = sdata->dev->dev_addr;
-			local->ops->remove_interface(hw, &conf);
-		}
-	}
-
 	/* flush again, in case driver queued work */
 	flush_workqueue(local->hw.workqueue);
 
-	/* stop hardware */
+	/* stop hardware - this must stop RX */
 	if (local->open_count) {
 		ieee80211_led_radio(local, false);
-		local->ops->stop(hw);
-	}
-	return 0;
-}
-
-int __ieee80211_resume(struct ieee80211_hw *hw)
-{
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_if_init_conf conf;
-	struct sta_info *sta;
-	unsigned long flags;
-	int res;
-
-	/* restart hardware */
-	if (local->open_count) {
-		res = local->ops->start(hw);
-
-		ieee80211_led_radio(local, hw->conf.radio_enabled);
+		drv_stop(local);
 	}
 
-	/* add interfaces */
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
-		    netif_running(sdata->dev)) {
-			conf.vif = &sdata->vif;
-			conf.type = sdata->vif.type;
-			conf.mac_addr = sdata->dev->dev_addr;
-			res = local->ops->add_interface(hw, &conf);
-		}
-	}
-
-	/* add STAs back */
-	if (local->ops->sta_notify) {
-		spin_lock_irqsave(&local->sta_lock, flags);
-		list_for_each_entry(sta, &local->sta_list, list) {
+	/* remove STAs */
+	spin_lock_irqsave(&local->sta_lock, flags);
+	list_for_each_entry(sta, &local->sta_list, list) {
+		if (local->ops->sta_notify) {
+			sdata = sta->sdata;
 			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 				sdata = container_of(sdata->bss,
 					     struct ieee80211_sub_if_data,
 					     u.ap);
 
-			local->ops->sta_notify(hw, &sdata->vif,
-				STA_NOTIFY_ADD, &sta->sta);
+			drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
+				       &sta->sta);
 		}
-		spin_unlock_irqrestore(&local->sta_lock, flags);
-	}
-
-	/* Clear Suspend state so that ADDBA requests can be processed */
-
-	rcu_read_lock();
 
-	if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
-		list_for_each_entry_rcu(sta, &local->sta_list, list) {
-			clear_sta_flags(sta, WLAN_STA_SUSPEND);
-		}
+		mesh_plink_quiesce(sta);
 	}
+	spin_unlock_irqrestore(&local->sta_lock, flags);
 
-	rcu_read_unlock();
-
-	/* add back keys */
-	list_for_each_entry(sdata, &local->interfaces, list)
-		if (netif_running(sdata->dev))
-			ieee80211_enable_keys(sdata);
-
-	/* setup RTS threshold */
-	if (local->ops->set_rts_threshold)
-		local->ops->set_rts_threshold(hw, local->rts_threshold);
-
-	/* reconfigure hardware */
-	ieee80211_hw_config(local, ~0);
-
-	netif_addr_lock_bh(local->mdev);
-	ieee80211_configure_filter(local);
-	netif_addr_unlock_bh(local->mdev);
-
-	/* Finally also reconfigure all the BSS information */
+	/* remove all interfaces */
 	list_for_each_entry(sdata, &local->interfaces, list) {
-		u32 changed = ~0;
-		if (!netif_running(sdata->dev))
-			continue;
-		switch (sdata->vif.type) {
+		switch(sdata->vif.type) {
 		case NL80211_IFTYPE_STATION:
-			/* disable beacon change bits */
-			changed &= ~IEEE80211_IFCC_BEACON;
-			/* fall through */
+			ieee80211_sta_quiesce(sdata);
+			break;
 		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_AP:
-		case NL80211_IFTYPE_MESH_POINT:
-			/*
-			 * Driver's config_interface can fail if rfkill is
-			 * enabled. Accommodate this return code.
-			 * FIXME: When mac80211 has knowledge of rfkill
-			 * state the code below can change back to:
-			 *   WARN(ieee80211_if_config(sdata, changed));
-			 *   ieee80211_bss_info_change_notify(sdata, ~0);
-			 */
-			if (ieee80211_if_config(sdata, changed))
-				printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
-				       sdata->dev->name);
-			else
-				ieee80211_bss_info_change_notify(sdata, ~0);
+			ieee80211_ibss_quiesce(sdata);
 			break;
-		case NL80211_IFTYPE_WDS:
+		case NL80211_IFTYPE_MESH_POINT:
+			ieee80211_mesh_quiesce(sdata);
 			break;
 		case NL80211_IFTYPE_AP_VLAN:
 		case NL80211_IFTYPE_MONITOR:
-			/* ignore virtual */
-			break;
-		case NL80211_IFTYPE_UNSPECIFIED:
-		case __NL80211_IFTYPE_AFTER_LAST:
-			WARN_ON(1);
+			/* don't tell driver about this */
+			continue;
+		default:
 			break;
 		}
+
+		if (!netif_running(sdata->dev))
+			continue;
+
+		conf.vif = &sdata->vif;
+		conf.type = sdata->vif.type;
+		conf.mac_addr = sdata->dev->dev_addr;
+		drv_remove_interface(local, &conf);
 	}
 
-	ieee80211_wake_queues_by_reason(hw,
-			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+	local->suspended = true;
+	local->quiescing = false;
 
 	return 0;
 }
+
+/*
+ * __ieee80211_resume() is a static inline which just calls
+ * ieee80211_reconfig(), which is also needed for hardware
+ * hang/firmware failure/etc. recovery.
+ */
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index d9233ec5061..b218b98fba7 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -80,8 +80,7 @@ use_low_rate(struct sk_buff *skb)
 	fc = le16_to_cpu(hdr->frame_control);
 
 	return ((info->flags & IEEE80211_TX_CTL_NO_ACK) ||
-		(fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
-		is_multicast_ether_addr(hdr->addr1));
+		(fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA);
 }
 
 
@@ -216,7 +215,7 @@ minstrel_get_next_sample(struct minstrel_sta_info *mi)
 	unsigned int sample_ndx;
 	sample_ndx = SAMPLE_TBL(mi, mi->sample_idx, mi->sample_column);
 	mi->sample_idx++;
-	if (mi->sample_idx > (mi->n_rates - 2)) {
+	if ((int) mi->sample_idx > (mi->n_rates - 2)) {
 		mi->sample_idx = 0;
 		mi->sample_column++;
 		if (mi->sample_column >= SAMPLE_COLUMNS)
@@ -245,7 +244,10 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
 
 	if (!sta || !mi || use_low_rate(skb)) {
 		ar[0].idx = rate_lowest_index(sband, sta);
-		ar[0].count = mp->max_retry;
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			ar[0].count = 1;
+		else
+			ar[0].count = mp->max_retry;
 		return;
 	}
 
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 8bef9a1262f..a0bef767ceb 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -289,13 +289,15 @@ rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
 		info->control.rates[0].count =
 			txrc->hw->conf.short_frame_max_tx_count;
 
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	fc = le16_to_cpu(hdr->frame_control);
 	if (!sta || !spinfo ||
 	    (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
-	    is_multicast_ether_addr(hdr->addr1)) {
+	    info->flags & IEEE80211_TX_CTL_NO_ACK) {
 		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			info->control.rates[0].count = 1;
+
 		return;
 	}
 
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 9776f73c51a..de5bba7f910 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -19,6 +19,7 @@
 #include <net/ieee80211_radiotap.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "led.h"
 #include "mesh.h"
 #include "wep.h"
@@ -629,15 +630,6 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	 * possible.
 	 */
 
-	if (!ieee80211_has_protected(hdr->frame_control)) {
-		if (!ieee80211_is_mgmt(hdr->frame_control) ||
-		    rx->sta == NULL || !test_sta_flags(rx->sta, WLAN_STA_MFP))
-			return RX_CONTINUE;
-		mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb);
-		if (mmie_keyidx < 0)
-			return RX_CONTINUE;
-	}
-
 	/*
 	 * No point in finding a key and decrypting if the frame is neither
 	 * addressed to us nor a multicast frame.
@@ -648,8 +640,14 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	if (rx->sta)
 		stakey = rcu_dereference(rx->sta->key);
 
+	if (!ieee80211_has_protected(hdr->frame_control))
+		mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb);
+
 	if (!is_multicast_ether_addr(hdr->addr1) && stakey) {
 		rx->key = stakey;
+		/* Skip decryption if the frame is not protected. */
+		if (!ieee80211_has_protected(hdr->frame_control))
+			return RX_CONTINUE;
 	} else if (mmie_keyidx >= 0) {
 		/* Broadcast/multicast robust management frame / BIP */
 		if ((rx->status->flag & RX_FLAG_DECRYPTED) &&
@@ -660,6 +658,21 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 		    mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS)
 			return RX_DROP_MONITOR; /* unexpected BIP keyidx */
 		rx->key = rcu_dereference(rx->sdata->keys[mmie_keyidx]);
+	} else if (!ieee80211_has_protected(hdr->frame_control)) {
+		/*
+		 * The frame was not protected, so skip decryption. However, we
+		 * need to set rx->key if there is a key that could have been
+		 * used so that the frame may be dropped if encryption would
+		 * have been expected.
+		 */
+		struct ieee80211_key *key = NULL;
+		if (ieee80211_is_mgmt(hdr->frame_control) &&
+		    is_multicast_ether_addr(hdr->addr1) &&
+		    (key = rcu_dereference(rx->sdata->default_mgmt_key)))
+			rx->key = key;
+		else if ((key = rcu_dereference(rx->sdata->default_key)))
+			rx->key = key;
+		return RX_CONTINUE;
 	} else {
 		/*
 		 * The device doesn't give us the IV so we won't be
@@ -773,9 +786,7 @@ static void ap_sta_ps_start(struct sta_info *sta)
 
 	atomic_inc(&sdata->bss->num_sta_ps);
 	set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
-	if (local->ops->sta_notify)
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-					STA_NOTIFY_SLEEP, &sta->sta);
+	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
 	       sdata->dev->name, sta->sta.addr, sta->sta.aid);
@@ -786,15 +797,12 @@ static int ap_sta_ps_end(struct sta_info *sta)
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	struct ieee80211_local *local = sdata->local;
-	struct sk_buff *skb;
-	int sent = 0;
+	int sent, buffered;
 
 	atomic_dec(&sdata->bss->num_sta_ps);
 
 	clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
-	if (local->ops->sta_notify)
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-					STA_NOTIFY_AWAKE, &sta->sta);
+	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
 
 	if (!skb_queue_empty(&sta->ps_tx_buf))
 		sta_info_clear_tim_bit(sta);
@@ -805,22 +813,16 @@ static int ap_sta_ps_end(struct sta_info *sta)
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
 
 	/* Send all buffered frames to the station */
-	while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL) {
-		sent++;
-		skb->requeue = 1;
-		dev_queue_xmit(skb);
-	}
-	while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) {
-		local->total_ps_buffered--;
-		sent++;
+	sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered);
+	buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf);
+	sent += buffered;
+	local->total_ps_buffered -= buffered;
+
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		printk(KERN_DEBUG "%s: STA %pM aid %d send PS frame "
-		       "since STA not sleeping anymore\n", sdata->dev->name,
-		       sta->sta.addr, sta->sta.aid);
+	printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames "
+	       "since STA not sleeping anymore\n", sdata->dev->name,
+	       sta->sta.addr, sta->sta.aid, sent - buffered, buffered);
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-		skb->requeue = 1;
-		dev_queue_xmit(skb);
-	}
 
 	return sent;
 }
@@ -1212,109 +1214,38 @@ ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 	/* Drop unencrypted frames if key is set. */
 	if (unlikely(!ieee80211_has_protected(fc) &&
 		     !ieee80211_is_nullfunc(fc) &&
-		     (!ieee80211_is_mgmt(fc) ||
-		      (ieee80211_is_unicast_robust_mgmt_frame(rx->skb) &&
-		       rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP))) &&
-		     (rx->key || rx->sdata->drop_unencrypted)))
-		return -EACCES;
-	/* BIP does not use Protected field, so need to check MMIE */
-	if (unlikely(rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP) &&
-		     ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
-		     ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+		     ieee80211_is_data(fc) &&
 		     (rx->key || rx->sdata->drop_unencrypted)))
 		return -EACCES;
+	if (rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP)) {
+		if (unlikely(ieee80211_is_unicast_robust_mgmt_frame(rx->skb) &&
+			     rx->key))
+			return -EACCES;
+		/* BIP does not use Protected field, so need to check MMIE */
+		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb)
+			     && ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+			     rx->key))
+			return -EACCES;
+		/*
+		 * When using MFP, Action frames are not allowed prior to
+		 * having configured keys.
+		 */
+		if (unlikely(ieee80211_is_action(fc) && !rx->key &&
+			     ieee80211_is_robust_mgmt_frame(
+				     (struct ieee80211_hdr *) rx->skb->data)))
+			return -EACCES;
+	}
 
 	return 0;
 }
 
 static int
-ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
+__ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
 {
 	struct net_device *dev = rx->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
-	u16 hdrlen, ethertype;
-	u8 *payload;
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN] __aligned(2);
-	struct sk_buff *skb = rx->skb;
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
-		return -1;
-
-	hdrlen = ieee80211_hdrlen(hdr->frame_control);
-
-	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
-	 * header
-	 * IEEE 802.11 address fields:
-	 * ToDS FromDS Addr1 Addr2 Addr3 Addr4
-	 *   0     0   DA    SA    BSSID n/a
-	 *   0     1   DA    BSSID SA    n/a
-	 *   1     0   BSSID SA    DA    n/a
-	 *   1     1   RA    TA    DA    SA
-	 */
-	memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
-	memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
-
-	switch (hdr->frame_control &
-		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
-	case cpu_to_le16(IEEE80211_FCTL_TODS):
-		if (unlikely(sdata->vif.type != NL80211_IFTYPE_AP &&
-			     sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
-			return -1;
-		break;
-	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
-		if (unlikely(sdata->vif.type != NL80211_IFTYPE_WDS &&
-			     sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
-			return -1;
-		if (ieee80211_vif_is_mesh(&sdata->vif)) {
-			struct ieee80211s_hdr *meshdr = (struct ieee80211s_hdr *)
-				(skb->data + hdrlen);
-			hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
-			if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
-				memcpy(dst, meshdr->eaddr1, ETH_ALEN);
-				memcpy(src, meshdr->eaddr2, ETH_ALEN);
-			}
-		}
-		break;
-	case cpu_to_le16(IEEE80211_FCTL_FROMDS):
-		if (sdata->vif.type != NL80211_IFTYPE_STATION ||
-		    (is_multicast_ether_addr(dst) &&
-		     !compare_ether_addr(src, dev->dev_addr)))
-			return -1;
-		break;
-	case cpu_to_le16(0):
-		if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
-			return -1;
-		break;
-	}
-
-	if (unlikely(skb->len - hdrlen < 8))
-		return -1;
-
-	payload = skb->data + hdrlen;
-	ethertype = (payload[6] << 8) | payload[7];
-
-	if (likely((compare_ether_addr(payload, rfc1042_header) == 0 &&
-		    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
-		   compare_ether_addr(payload, bridge_tunnel_header) == 0)) {
-		/* remove RFC1042 or Bridge-Tunnel encapsulation and
-		 * replace EtherType */
-		skb_pull(skb, hdrlen + 6);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	} else {
-		struct ethhdr *ehdr;
-		__be16 len;
-
-		skb_pull(skb, hdrlen);
-		len = htons(skb->len);
-		ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
-		memcpy(ehdr->h_dest, dst, ETH_ALEN);
-		memcpy(ehdr->h_source, src, ETH_ALEN);
-		ehdr->h_proto = len;
-	}
-	return 0;
+	return ieee80211_data_to_8023(rx->skb, dev->dev_addr, sdata->vif.type);
 }
 
 /*
@@ -1397,7 +1328,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 		 * mac80211. That also explains the __skb_push()
 		 * below.
 		 */
-		align = (unsigned long)skb->data & 3;
+		align = ((unsigned long)(skb->data + sizeof(struct ethhdr))) & 3;
 		if (align) {
 			if (WARN_ON(skb_headroom(skb) < 3)) {
 				dev_kfree_skb(skb);
@@ -1453,7 +1384,7 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 	if (!(rx->flags & IEEE80211_RX_AMSDU))
 		return RX_CONTINUE;
 
-	err = ieee80211_data_to_8023(rx);
+	err = __ieee80211_data_to_8023(rx);
 	if (unlikely(err))
 		return RX_DROP_UNUSABLE;
 
@@ -1639,7 +1570,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
 		return RX_DROP_MONITOR;
 
-	err = ieee80211_data_to_8023(rx);
+	err = __ieee80211_data_to_8023(rx);
 	if (unlikely(err))
 		return RX_DROP_UNUSABLE;
 
@@ -1827,6 +1758,9 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 				   sizeof(mgmt->u.action.u.chan_switch)))
 				return RX_DROP_MONITOR;
 
+			if (sdata->vif.type != NL80211_IFTYPE_STATION)
+				return RX_DROP_MONITOR;
+
 			if (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN))
 				return RX_DROP_MONITOR;
 
@@ -1837,7 +1771,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 			if (!bss)
 				return RX_DROP_MONITOR;
 
-			ieee80211_process_chanswitch(sdata,
+			ieee80211_sta_process_chanswitch(sdata,
 				     &mgmt->u.action.u.chan_switch.sw_elem, bss);
 			ieee80211_rx_bss_put(local, bss);
 			break;
@@ -1932,7 +1866,7 @@ static void ieee80211_rx_michael_mic_report(struct net_device *dev,
 	    !ieee80211_is_auth(hdr->frame_control))
 		goto ignore;
 
-	mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr);
+	mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL);
  ignore:
 	dev_kfree_skb(rx->skb);
 	rx->skb = NULL;
@@ -2287,6 +2221,43 @@ static inline u16 seq_sub(u16 sq1, u16 sq2)
 }
 
 
+static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
+					    struct tid_ampdu_rx *tid_agg_rx,
+					    int index)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *rate;
+	struct ieee80211_rx_status status;
+
+	if (!tid_agg_rx->reorder_buf[index])
+		goto no_frame;
+
+	/* release the reordered frames to stack */
+	memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, sizeof(status));
+	sband = hw->wiphy->bands[status.band];
+	if (status.flag & RX_FLAG_HT)
+		rate = sband->bitrates; /* TODO: HT rates */
+	else
+		rate = &sband->bitrates[status.rate_idx];
+	__ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
+				     &status, rate);
+	tid_agg_rx->stored_mpdu_num--;
+	tid_agg_rx->reorder_buf[index] = NULL;
+
+no_frame:
+	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+}
+
+
+/*
+ * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
+ * the skb was added to the buffer longer than this time ago, the earlier
+ * frames that have not yet been received are assumed to be lost and the skb
+ * can be released for processing. This may also release other skb's from the
+ * reorder buffer if there are no additional gaps between the frames.
+ */
+#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
+
 /*
  * As it function blongs to Rx path it must be called with
  * the proper rcu_read_lock protection for its flow.
@@ -2298,12 +2269,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 					   u16 mpdu_seq_num,
 					   int bar_req)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct ieee80211_rx_status status;
 	u16 head_seq_num, buf_size;
 	int index;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_rate *rate;
 
 	buf_size = tid_agg_rx->buf_size;
 	head_seq_num = tid_agg_rx->head_seq_num;
@@ -2328,28 +2295,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 			index = seq_sub(tid_agg_rx->head_seq_num,
 				tid_agg_rx->ssn)
 				% tid_agg_rx->buf_size;
-
-			if (tid_agg_rx->reorder_buf[index]) {
-				/* release the reordered frames to stack */
-				memcpy(&status,
-					tid_agg_rx->reorder_buf[index]->cb,
-					sizeof(status));
-				sband = local->hw.wiphy->bands[status.band];
-				if (status.flag & RX_FLAG_HT) {
-					/* TODO: HT rates */
-					rate = sband->bitrates;
-				} else {
-					rate = &sband->bitrates
-						[status.rate_idx];
-				}
-				__ieee80211_rx_handle_packet(hw,
-					tid_agg_rx->reorder_buf[index],
-					&status, rate);
-				tid_agg_rx->stored_mpdu_num--;
-				tid_agg_rx->reorder_buf[index] = NULL;
-			}
-			tid_agg_rx->head_seq_num =
-				seq_inc(tid_agg_rx->head_seq_num);
+			ieee80211_release_reorder_frame(hw, tid_agg_rx,
+							index);
 		}
 		if (bar_req)
 			return 1;
@@ -2376,26 +2323,50 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 
 	/* put the frame in the reordering buffer */
 	tid_agg_rx->reorder_buf[index] = skb;
+	tid_agg_rx->reorder_time[index] = jiffies;
 	memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
 	       sizeof(*rxstatus));
 	tid_agg_rx->stored_mpdu_num++;
 	/* release the buffer until next missing frame */
 	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
 						% tid_agg_rx->buf_size;
-	while (tid_agg_rx->reorder_buf[index]) {
-		/* release the reordered frame back to stack */
-		memcpy(&status, tid_agg_rx->reorder_buf[index]->cb,
-			sizeof(status));
-		sband = local->hw.wiphy->bands[status.band];
-		if (status.flag & RX_FLAG_HT)
-			rate = sband->bitrates; /* TODO: HT rates */
-		else
-			rate = &sband->bitrates[status.rate_idx];
-		__ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
-					     &status, rate);
-		tid_agg_rx->stored_mpdu_num--;
-		tid_agg_rx->reorder_buf[index] = NULL;
-		tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+	if (!tid_agg_rx->reorder_buf[index] &&
+	    tid_agg_rx->stored_mpdu_num > 1) {
+		/*
+		 * No buffers ready to be released, but check whether any
+		 * frames in the reorder buffer have timed out.
+		 */
+		int j;
+		int skipped = 1;
+		for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
+		     j = (j + 1) % tid_agg_rx->buf_size) {
+			if (tid_agg_rx->reorder_buf[j] == NULL) {
+				skipped++;
+				continue;
+			}
+			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+					HZ / 10))
+				break;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+			if (net_ratelimit())
+				printk(KERN_DEBUG "%s: release an RX reorder "
+				       "frame due to timeout on earlier "
+				       "frames\n",
+				       wiphy_name(hw->wiphy));
+#endif
+			ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
+
+			/*
+			 * Increment the head seq# also for the skipped slots.
+			 */
+			tid_agg_rx->head_seq_num =
+				(tid_agg_rx->head_seq_num + skipped) &
+				SEQ_MASK;
+			skipped = 0;
+		}
+	} else while (tid_agg_rx->reorder_buf[index]) {
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
 		index =	seq_sub(tid_agg_rx->head_seq_num,
 			tid_agg_rx->ssn) % tid_agg_rx->buf_size;
 	}
@@ -2517,6 +2488,18 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 
+	/*
+	 * In theory, the block ack reordering should happen after duplicate
+	 * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
+	 * the call to ieee80211_rx_reorder_ampdu() should really be moved to
+	 * happen as a new RX handler between ieee80211_rx_h_check and
+	 * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
+	 * the time being, the call can be here since RX reorder buf processing
+	 * will implicitly skip duplicates. We could, in theory at least,
+	 * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
+	 * frames from other than operational channel), but that should not
+	 * happen in normal networks.
+	 */
 	if (!ieee80211_rx_reorder_ampdu(local, skb, status))
 		__ieee80211_rx_handle_packet(hw, skb, status, rate);
 
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 3bf9839f591..2a8d09ad17f 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -21,6 +21,7 @@
 #include <net/iw_handler.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "mesh.h"
 
 #define IEEE80211_PROBE_DELAY (HZ / 33)
@@ -202,18 +203,6 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 	return RX_QUEUED;
 }
 
-void ieee80211_scan_failed(struct ieee80211_local *local)
-{
-	if (WARN_ON(!local->scan_req))
-		return;
-
-	/* notify cfg80211 about the failed scan */
-	if (local->scan_req != &local->int_scan_req)
-		cfg80211_scan_done(local->scan_req, true);
-
-	local->scan_req = NULL;
-}
-
 /*
  * inform AP that we will go to sleep so that it will buffer the frames
  * while we scan
@@ -253,7 +242,7 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 
-	if (!local->powersave)
+	if (!local->ps_sdata)
 		ieee80211_send_nullfunc(local, sdata, 0);
 	else {
 		/*
@@ -274,51 +263,62 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
 	}
 }
 
+static void ieee80211_restore_scan_ies(struct ieee80211_local *local)
+{
+	kfree(local->scan_req->ie);
+	local->scan_req->ie = local->orig_ies;
+	local->scan_req->ie_len = local->orig_ies_len;
+}
+
 void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
+	bool was_hw_scan;
 
-	if (WARN_ON(!local->hw_scanning && !local->sw_scanning))
+	mutex_lock(&local->scan_mtx);
+
+	if (WARN_ON(!local->hw_scanning && !local->sw_scanning)) {
+		mutex_unlock(&local->scan_mtx);
 		return;
+	}
 
-	if (WARN_ON(!local->scan_req))
+	if (WARN_ON(!local->scan_req)) {
+		mutex_unlock(&local->scan_mtx);
 		return;
+	}
+
+	if (local->hw_scanning)
+		ieee80211_restore_scan_ies(local);
 
 	if (local->scan_req != &local->int_scan_req)
 		cfg80211_scan_done(local->scan_req, aborted);
 	local->scan_req = NULL;
 
-	local->last_scan_completed = jiffies;
+	was_hw_scan = local->hw_scanning;
+	local->hw_scanning = false;
+	local->sw_scanning = false;
+	local->scan_channel = NULL;
 
-	if (local->hw_scanning) {
-		local->hw_scanning = false;
-		/*
-		 * Somebody might have requested channel change during scan
-		 * that we won't have acted upon, try now. ieee80211_hw_config
-		 * will set the flag based on actual changes.
-		 */
-		ieee80211_hw_config(local, 0);
-		goto done;
-	}
+	/* we only have to protect scan_req and hw/sw scan */
+	mutex_unlock(&local->scan_mtx);
 
-	local->sw_scanning = false;
 	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+	if (was_hw_scan)
+		goto done;
 
 	netif_tx_lock_bh(local->mdev);
 	netif_addr_lock(local->mdev);
 	local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC;
-	local->ops->configure_filter(local_to_hw(local),
-				     FIF_BCN_PRBRESP_PROMISC,
-				     &local->filter_flags,
-				     local->mdev->mc_count,
-				     local->mdev->mc_list);
+	drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+			     &local->filter_flags,
+			     local->mdev->mc_count,
+			     local->mdev->mc_list);
 
 	netif_addr_unlock(local->mdev);
 	netif_tx_unlock_bh(local->mdev);
 
-	if (local->ops->sw_scan_complete)
-		local->ops->sw_scan_complete(local_to_hw(local));
+	drv_sw_scan_complete(local);
 
 	mutex_lock(&local->iflist_mtx);
 	list_for_each_entry(sdata, &local->interfaces, list) {
@@ -338,18 +338,160 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 		if (sdata->vif.type == NL80211_IFTYPE_AP ||
 		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
 		    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-			ieee80211_if_config(sdata,
-					    IEEE80211_IFCC_BEACON_ENABLED);
+			ieee80211_bss_info_change_notify(
+				sdata, BSS_CHANGED_BEACON_ENABLED);
 	}
 	mutex_unlock(&local->iflist_mtx);
 
  done:
+	ieee80211_recalc_idle(local);
 	ieee80211_mlme_notify_scan_completed(local);
 	ieee80211_ibss_notify_scan_completed(local);
 	ieee80211_mesh_notify_scan_completed(local);
 }
 EXPORT_SYMBOL(ieee80211_scan_completed);
 
+static int ieee80211_start_sw_scan(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	/*
+	 * Hardware/driver doesn't support hw_scan, so use software
+	 * scanning instead. First send a nullfunc frame with power save
+	 * bit on so that AP will buffer the frames for us while we are not
+	 * listening, then send probe requests to each channel and wait for
+	 * the responses. After all channels are scanned, tune back to the
+	 * original channel and send a nullfunc frame with power save bit
+	 * off to trigger the AP to send us all the buffered frames.
+	 *
+	 * Note that while local->sw_scanning is true everything else but
+	 * nullfunc frames and probe requests will be dropped in
+	 * ieee80211_tx_h_check_assoc().
+	 */
+	drv_sw_scan_start(local);
+
+	mutex_lock(&local->iflist_mtx);
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+
+		/* disable beaconing */
+		if (sdata->vif.type == NL80211_IFTYPE_AP ||
+		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+		    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+			ieee80211_bss_info_change_notify(
+				sdata, BSS_CHANGED_BEACON_ENABLED);
+
+		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+			if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
+				netif_tx_stop_all_queues(sdata->dev);
+				ieee80211_scan_ps_enable(sdata);
+			}
+		} else
+			netif_tx_stop_all_queues(sdata->dev);
+	}
+	mutex_unlock(&local->iflist_mtx);
+
+	local->scan_state = SCAN_SET_CHANNEL;
+	local->scan_channel_idx = 0;
+
+	netif_addr_lock_bh(local->mdev);
+	local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
+	drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+			     &local->filter_flags,
+			     local->mdev->mc_count,
+			     local->mdev->mc_list);
+	netif_addr_unlock_bh(local->mdev);
+
+	/* TODO: start scan as soon as all nullfunc frames are ACKed */
+	queue_delayed_work(local->hw.workqueue, &local->scan_work,
+			   IEEE80211_CHANNEL_TIME);
+
+	return 0;
+}
+
+
+static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
+				  struct cfg80211_scan_request *req)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	int rc;
+
+	if (local->scan_req)
+		return -EBUSY;
+
+	if (local->ops->hw_scan) {
+		u8 *ies;
+		int ielen;
+
+		ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
+			      local->scan_ies_len + req->ie_len, GFP_KERNEL);
+		if (!ies)
+			return -ENOMEM;
+
+		ielen = ieee80211_build_preq_ies(local, ies,
+						 req->ie, req->ie_len);
+		local->orig_ies = req->ie;
+		local->orig_ies_len = req->ie_len;
+		req->ie = ies;
+		req->ie_len = ielen;
+	}
+
+	local->scan_req = req;
+	local->scan_sdata = sdata;
+
+	if (req != &local->int_scan_req &&
+	    sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE ||
+	     ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE ||
+	     ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE)) {
+		/* actually wait for the assoc to finish/time out */
+		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+		return 0;
+	}
+
+	if (local->ops->hw_scan)
+		local->hw_scanning = true;
+	else
+		local->sw_scanning = true;
+	/*
+	 * Kicking off the scan need not be protected,
+	 * only the scan variable stuff, since now
+	 * local->scan_req is assigned and other callers
+	 * will abort their scan attempts.
+	 *
+	 * This avoids getting a scan_mtx -> iflist_mtx
+	 * dependency, so that the scan completed calls
+	 * have more locking freedom.
+	 */
+
+	ieee80211_recalc_idle(local);
+	mutex_unlock(&local->scan_mtx);
+
+	if (local->ops->hw_scan)
+		rc = drv_hw_scan(local, local->scan_req);
+	else
+		rc = ieee80211_start_sw_scan(local);
+
+	mutex_lock(&local->scan_mtx);
+
+	if (rc) {
+		if (local->ops->hw_scan) {
+			local->hw_scanning = false;
+			ieee80211_restore_scan_ies(local);
+		} else
+			local->sw_scanning = false;
+
+		ieee80211_recalc_idle(local);
+
+		local->scan_req = NULL;
+		local->scan_sdata = NULL;
+	}
+
+	return rc;
+}
+
 void ieee80211_scan_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
@@ -359,17 +501,41 @@ void ieee80211_scan_work(struct work_struct *work)
 	int skip, i;
 	unsigned long next_delay = 0;
 
+	mutex_lock(&local->scan_mtx);
+	if (!sdata || !local->scan_req) {
+		mutex_unlock(&local->scan_mtx);
+		return;
+	}
+
+	if (local->scan_req && !(local->sw_scanning || local->hw_scanning)) {
+		struct cfg80211_scan_request *req = local->scan_req;
+		int rc;
+
+		local->scan_req = NULL;
+
+		rc = __ieee80211_start_scan(sdata, req);
+		mutex_unlock(&local->scan_mtx);
+
+		if (rc)
+			ieee80211_scan_completed(&local->hw, true);
+		return;
+	}
+
+	mutex_unlock(&local->scan_mtx);
+
 	/*
 	 * Avoid re-scheduling when the sdata is going away.
 	 */
-	if (!netif_running(sdata->dev))
+	if (!netif_running(sdata->dev)) {
+		ieee80211_scan_completed(&local->hw, true);
 		return;
+	}
 
 	switch (local->scan_state) {
 	case SCAN_SET_CHANNEL:
 		/* if no more bands/channels left, complete scan */
 		if (local->scan_channel_idx >= local->scan_req->n_channels) {
-			ieee80211_scan_completed(local_to_hw(local), false);
+			ieee80211_scan_completed(&local->hw, false);
 			return;
 		}
 		skip = 0;
@@ -393,24 +559,39 @@ void ieee80211_scan_work(struct work_struct *work)
 		if (skip)
 			break;
 
-		next_delay = IEEE80211_PROBE_DELAY +
-			     usecs_to_jiffies(local->hw.channel_change_time);
+		/*
+		 * Probe delay is used to update the NAV, cf. 11.1.3.2.2
+		 * (which unfortunately doesn't say _why_ step a) is done,
+		 * but it waits for the probe delay or until a frame is
+		 * received - and the received frame would update the NAV).
+		 * For now, we do not support waiting until a frame is
+		 * received.
+		 *
+		 * In any case, it is not necessary for a passive scan.
+		 */
+		if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
+		    !local->scan_req->n_ssids) {
+			next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+			break;
+		}
+
+		next_delay = IEEE80211_PROBE_DELAY;
 		local->scan_state = SCAN_SEND_PROBE;
 		break;
 	case SCAN_SEND_PROBE:
-		next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
-		local->scan_state = SCAN_SET_CHANNEL;
-
-		if (local->scan_channel->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
-		    !local->scan_req->n_ssids)
-			break;
 		for (i = 0; i < local->scan_req->n_ssids; i++)
 			ieee80211_send_probe_req(
 				sdata, NULL,
 				local->scan_req->ssids[i].ssid,
 				local->scan_req->ssids[i].ssid_len,
 				local->scan_req->ie, local->scan_req->ie_len);
+
+		/*
+		 * After sending probe requests, wait for probe responses
+		 * on the channel.
+		 */
 		next_delay = IEEE80211_CHANNEL_TIME;
+		local->scan_state = SCAN_SET_CHANNEL;
 		break;
 	}
 
@@ -418,150 +599,53 @@ void ieee80211_scan_work(struct work_struct *work)
 			   next_delay);
 }
 
-
-int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
-			 struct cfg80211_scan_request *req)
+int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
+			   struct cfg80211_scan_request *req)
 {
-	struct ieee80211_local *local = scan_sdata->local;
-	struct ieee80211_sub_if_data *sdata;
-
-	if (!req)
-		return -EINVAL;
-
-	if (local->scan_req && local->scan_req != req)
-		return -EBUSY;
-
-	local->scan_req = req;
-
-	/* MLME-SCAN.request (page 118)  page 144 (11.1.3.1)
-	 * BSSType: INFRASTRUCTURE, INDEPENDENT, ANY_BSS
-	 * BSSID: MACAddress
-	 * SSID
-	 * ScanType: ACTIVE, PASSIVE
-	 * ProbeDelay: delay (in microseconds) to be used prior to transmitting
-	 *    a Probe frame during active scanning
-	 * ChannelList
-	 * MinChannelTime (>= ProbeDelay), in TU
-	 * MaxChannelTime: (>= MinChannelTime), in TU
-	 */
-
-	 /* MLME-SCAN.confirm
-	  * BSSDescriptionSet
-	  * ResultCode: SUCCESS, INVALID_PARAMETERS
-	 */
-
-	if (local->sw_scanning || local->hw_scanning) {
-		if (local->scan_sdata == scan_sdata)
-			return 0;
-		return -EBUSY;
-	}
-
-	if (local->ops->hw_scan) {
-		int rc;
-
-		local->hw_scanning = true;
-		rc = local->ops->hw_scan(local_to_hw(local), req);
-		if (rc) {
-			local->hw_scanning = false;
-			return rc;
-		}
-		local->scan_sdata = scan_sdata;
-		return 0;
-	}
-
-	/*
-	 * Hardware/driver doesn't support hw_scan, so use software
-	 * scanning instead. First send a nullfunc frame with power save
-	 * bit on so that AP will buffer the frames for us while we are not
-	 * listening, then send probe requests to each channel and wait for
-	 * the responses. After all channels are scanned, tune back to the
-	 * original channel and send a nullfunc frame with power save bit
-	 * off to trigger the AP to send us all the buffered frames.
-	 *
-	 * Note that while local->sw_scanning is true everything else but
-	 * nullfunc frames and probe requests will be dropped in
-	 * ieee80211_tx_h_check_assoc().
-	 */
-	local->sw_scanning = true;
-	if (local->ops->sw_scan_start)
-		local->ops->sw_scan_start(local_to_hw(local));
+	int res;
 
-	mutex_lock(&local->iflist_mtx);
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (!netif_running(sdata->dev))
-			continue;
+	mutex_lock(&sdata->local->scan_mtx);
+	res = __ieee80211_start_scan(sdata, req);
+	mutex_unlock(&sdata->local->scan_mtx);
 
-		/* disable beaconing */
-		if (sdata->vif.type == NL80211_IFTYPE_AP ||
-		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
-		    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-			ieee80211_if_config(sdata,
-					    IEEE80211_IFCC_BEACON_ENABLED);
+	return res;
+}
 
-		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-			if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
-				netif_tx_stop_all_queues(sdata->dev);
-				ieee80211_scan_ps_enable(sdata);
-			}
-		} else
-			netif_tx_stop_all_queues(sdata->dev);
-	}
-	mutex_unlock(&local->iflist_mtx);
+int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
+				    const u8 *ssid, u8 ssid_len)
+{
+	struct ieee80211_local *local = sdata->local;
+	int ret = -EBUSY;
 
-	local->scan_state = SCAN_SET_CHANNEL;
-	local->scan_channel_idx = 0;
-	local->scan_sdata = scan_sdata;
-	local->scan_req = req;
+	mutex_lock(&local->scan_mtx);
 
-	netif_addr_lock_bh(local->mdev);
-	local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
-	local->ops->configure_filter(local_to_hw(local),
-				     FIF_BCN_PRBRESP_PROMISC,
-				     &local->filter_flags,
-				     local->mdev->mc_count,
-				     local->mdev->mc_list);
-	netif_addr_unlock_bh(local->mdev);
+	/* busy scanning */
+	if (local->scan_req)
+		goto unlock;
 
-	/* TODO: start scan as soon as all nullfunc frames are ACKed */
-	queue_delayed_work(local->hw.workqueue, &local->scan_work,
-			   IEEE80211_CHANNEL_TIME);
+	memcpy(local->int_scan_req.ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
+	local->int_scan_req.ssids[0].ssid_len = ssid_len;
 
-	return 0;
+	ret = __ieee80211_start_scan(sdata, &sdata->local->int_scan_req);
+ unlock:
+	mutex_unlock(&local->scan_mtx);
+	return ret;
 }
 
-
-int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
-			   struct cfg80211_scan_request *req)
+void ieee80211_scan_cancel(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_if_managed *ifmgd;
-
-	if (!req)
-		return -EINVAL;
+	bool swscan;
 
-	if (local->scan_req && local->scan_req != req)
-		return -EBUSY;
-
-	local->scan_req = req;
-
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return ieee80211_start_scan(sdata, req);
+	cancel_delayed_work_sync(&local->scan_work);
 
 	/*
-	 * STA has a state machine that might need to defer scanning
-	 * while it's trying to associate/authenticate, therefore we
-	 * queue it up to the state machine in that case.
+	 * Only call this function when a scan can't be
+	 * queued -- mostly at suspend under RTNL.
 	 */
+	mutex_lock(&local->scan_mtx);
+	swscan = local->sw_scanning;
+	mutex_unlock(&local->scan_mtx);
 
-	if (local->sw_scanning || local->hw_scanning) {
-		if (local->scan_sdata == sdata)
-			return 0;
-		return -EBUSY;
-	}
-
-	ifmgd = &sdata->u.mgd;
-	set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
-	queue_work(local->hw.workqueue, &ifmgd->work);
-
-	return 0;
+	if (swscan)
+		ieee80211_scan_completed(&local->hw, true);
 }
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index 5f7a2624ed7..68953033403 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -15,7 +15,7 @@
  */
 
 #include <linux/ieee80211.h>
-#include <net/wireless.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "sta_info.h"
@@ -84,104 +84,3 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 			mgmt->sa, mgmt->bssid,
 			mgmt->u.action.u.measurement.dialog_token);
 }
-
-void ieee80211_chswitch_work(struct work_struct *work)
-{
-	struct ieee80211_sub_if_data *sdata =
-		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
-	struct ieee80211_bss *bss;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
-	if (!netif_running(sdata->dev))
-		return;
-
-	bss = ieee80211_rx_bss_get(sdata->local, ifmgd->bssid,
-				   sdata->local->hw.conf.channel->center_freq,
-				   ifmgd->ssid, ifmgd->ssid_len);
-	if (!bss)
-		goto exit;
-
-	sdata->local->oper_channel = sdata->local->csa_channel;
-	/* XXX: shouldn't really modify cfg80211-owned data! */
-	if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL))
-		bss->cbss.channel = sdata->local->oper_channel;
-
-	ieee80211_rx_bss_put(sdata->local, bss);
-exit:
-	ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
-	ieee80211_wake_queues_by_reason(&sdata->local->hw,
-					IEEE80211_QUEUE_STOP_REASON_CSA);
-}
-
-void ieee80211_chswitch_timer(unsigned long data)
-{
-	struct ieee80211_sub_if_data *sdata =
-		(struct ieee80211_sub_if_data *) data;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
-	queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
-}
-
-void ieee80211_process_chanswitch(struct ieee80211_sub_if_data *sdata,
-				  struct ieee80211_channel_sw_ie *sw_elem,
-				  struct ieee80211_bss *bss)
-{
-	struct ieee80211_channel *new_ch;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-	int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
-
-	/* FIXME: Handle ADHOC later */
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return;
-
-	if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATED)
-		return;
-
-	if (sdata->local->sw_scanning || sdata->local->hw_scanning)
-		return;
-
-	/* Disregard subsequent beacons if we are already running a timer
-	   processing a CSA */
-
-	if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
-		return;
-
-	new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
-	if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED)
-		return;
-
-	sdata->local->csa_channel = new_ch;
-
-	if (sw_elem->count <= 1) {
-		queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
-	} else {
-		ieee80211_stop_queues_by_reason(&sdata->local->hw,
-						IEEE80211_QUEUE_STOP_REASON_CSA);
-		ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
-		mod_timer(&ifmgd->chswitch_timer,
-			  jiffies +
-			  msecs_to_jiffies(sw_elem->count *
-					   bss->cbss.beacon_interval));
-	}
-}
-
-void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
-				 u16 capab_info, u8 *pwr_constr_elem,
-				 u8 pwr_constr_elem_len)
-{
-	struct ieee80211_conf *conf = &sdata->local->hw.conf;
-
-	if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT))
-		return;
-
-	/* Power constraint IE length should be 1 octet */
-	if (pwr_constr_elem_len != 1)
-		return;
-
-	if ((*pwr_constr_elem <= conf->channel->max_power) &&
-	    (*pwr_constr_elem != sdata->local->power_constr_level)) {
-		sdata->local->power_constr_level = *pwr_constr_elem;
-		ieee80211_hw_config(sdata->local, 0);
-	}
-}
-
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index c5f14e6bbde..a360bceeba5 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -19,6 +19,7 @@
 
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "sta_info.h"
 #include "debugfs_sta.h"
@@ -43,6 +44,15 @@
  * When the insertion fails (sta_info_insert()) returns non-zero), the
  * structure will have been freed by sta_info_insert()!
  *
+ * sta entries are added by mac80211 when you establish a link with a
+ * peer. This means different things for the different type of interfaces
+ * we support. For a regular station this mean we add the AP sta when we
+ * receive an assocation response from the AP. For IBSS this occurs when
+ * we receive a probe response or a beacon from target IBSS network. For
+ * WDS we add the sta for the peer imediately upon device open. When using
+ * AP mode we add stations for each respective station upon request from
+ * userspace through nl80211.
+ *
  * Because there are debugfs entries for each station, and adding those
  * must be able to sleep, it is also possible to "pin" a station entry,
  * that means it can be removed from the hash table but not be freed.
@@ -292,6 +302,9 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	skb_queue_head_init(&sta->ps_tx_buf);
 	skb_queue_head_init(&sta->tx_filtered);
 
+	for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
+		sta->last_seq_ctrl[i] = cpu_to_le16(USHORT_MAX);
+
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 	printk(KERN_DEBUG "%s: Allocated STA %pM\n",
 	       wiphy_name(local->hw.wiphy), sta->sta.addr);
@@ -346,8 +359,7 @@ int sta_info_insert(struct sta_info *sta)
 					     struct ieee80211_sub_if_data,
 					     u.ap);
 
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-				       STA_NOTIFY_ADD, &sta->sta);
+		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
 	}
 
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
@@ -405,8 +417,7 @@ static void __sta_info_set_tim_bit(struct ieee80211_if_ap *bss,
 
 	if (sta->local->ops->set_tim) {
 		sta->local->tim_in_locked_section = true;
-		sta->local->ops->set_tim(local_to_hw(sta->local),
-					 &sta->sta, true);
+		drv_set_tim(sta->local, &sta->sta, true);
 		sta->local->tim_in_locked_section = false;
 	}
 }
@@ -431,8 +442,7 @@ static void __sta_info_clear_tim_bit(struct ieee80211_if_ap *bss,
 
 	if (sta->local->ops->set_tim) {
 		sta->local->tim_in_locked_section = true;
-		sta->local->ops->set_tim(local_to_hw(sta->local),
-					 &sta->sta, false);
+		drv_set_tim(sta->local, &sta->sta, false);
 		sta->local->tim_in_locked_section = false;
 	}
 }
@@ -482,8 +492,8 @@ static void __sta_info_unlink(struct sta_info **sta)
 					     struct ieee80211_sub_if_data,
 					     u.ap);
 
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-				       STA_NOTIFY_REMOVE, &(*sta)->sta);
+		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
+			       &(*sta)->sta);
 	}
 
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
@@ -543,9 +553,8 @@ void sta_info_unlink(struct sta_info **sta)
 	spin_unlock_irqrestore(&local->sta_lock, flags);
 }
 
-static inline int sta_info_buffer_expired(struct ieee80211_local *local,
-					  struct sta_info *sta,
-					  struct sk_buff *skb)
+static int sta_info_buffer_expired(struct sta_info *sta,
+				   struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *info;
 	int timeout;
@@ -556,8 +565,9 @@ static inline int sta_info_buffer_expired(struct ieee80211_local *local,
 	info = IEEE80211_SKB_CB(skb);
 
 	/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */
-	timeout = (sta->listen_interval * local->hw.conf.beacon_int * 32 /
-		   15625) * HZ;
+	timeout = (sta->listen_interval *
+		   sta->sdata->vif.bss_conf.beacon_int *
+		   32 / 15625) * HZ;
 	if (timeout < STA_TX_BUFFER_EXPIRE)
 		timeout = STA_TX_BUFFER_EXPIRE;
 	return time_after(jiffies, info->control.jiffies + timeout);
@@ -577,7 +587,7 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local,
 	for (;;) {
 		spin_lock_irqsave(&sta->ps_tx_buf.lock, flags);
 		skb = skb_peek(&sta->ps_tx_buf);
-		if (sta_info_buffer_expired(local, sta, skb))
+		if (sta_info_buffer_expired(sta, skb))
 			skb = __skb_dequeue(&sta->ps_tx_buf);
 		else
 			skb = NULL;
@@ -610,6 +620,9 @@ static void sta_info_cleanup(unsigned long data)
 		sta_info_cleanup_expire_buffered(local, sta);
 	rcu_read_unlock();
 
+	if (local->quiescing)
+		return;
+
 	local->sta_cleanup.expires =
 		round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
 	add_timer(&local->sta_cleanup);
@@ -686,41 +699,10 @@ static void sta_info_debugfs_add_work(struct work_struct *work)
 }
 #endif
 
-static void __ieee80211_run_pending_flush(struct ieee80211_local *local)
-{
-	struct sta_info *sta;
-	unsigned long flags;
-
-	ASSERT_RTNL();
-
-	spin_lock_irqsave(&local->sta_lock, flags);
-	while (!list_empty(&local->sta_flush_list)) {
-		sta = list_first_entry(&local->sta_flush_list,
-				       struct sta_info, list);
-		list_del(&sta->list);
-		spin_unlock_irqrestore(&local->sta_lock, flags);
-		sta_info_destroy(sta);
-		spin_lock_irqsave(&local->sta_lock, flags);
-	}
-	spin_unlock_irqrestore(&local->sta_lock, flags);
-}
-
-static void ieee80211_sta_flush_work(struct work_struct *work)
-{
-	struct ieee80211_local *local =
-		container_of(work, struct ieee80211_local, sta_flush_work);
-
-	rtnl_lock();
-	__ieee80211_run_pending_flush(local);
-	rtnl_unlock();
-}
-
 void sta_info_init(struct ieee80211_local *local)
 {
 	spin_lock_init(&local->sta_lock);
 	INIT_LIST_HEAD(&local->sta_list);
-	INIT_LIST_HEAD(&local->sta_flush_list);
-	INIT_WORK(&local->sta_flush_work, ieee80211_sta_flush_work);
 
 	setup_timer(&local->sta_cleanup, sta_info_cleanup,
 		    (unsigned long)local);
@@ -741,7 +723,6 @@ int sta_info_start(struct ieee80211_local *local)
 void sta_info_stop(struct ieee80211_local *local)
 {
 	del_timer(&local->sta_cleanup);
-	cancel_work_sync(&local->sta_flush_work);
 #ifdef CONFIG_MAC80211_DEBUGFS
 	/*
 	 * Make sure the debugfs adding work isn't pending after this
@@ -752,10 +733,7 @@ void sta_info_stop(struct ieee80211_local *local)
 	cancel_work_sync(&local->sta_debugfs_add);
 #endif
 
-	rtnl_lock();
 	sta_info_flush(local, NULL);
-	__ieee80211_run_pending_flush(local);
-	rtnl_unlock();
 }
 
 /**
@@ -767,7 +745,7 @@ void sta_info_stop(struct ieee80211_local *local)
  * @sdata: matching rule for the net device (sta->dev) or %NULL to match all STAs
  */
 int sta_info_flush(struct ieee80211_local *local,
-		    struct ieee80211_sub_if_data *sdata)
+		   struct ieee80211_sub_if_data *sdata)
 {
 	struct sta_info *sta, *tmp;
 	LIST_HEAD(tmp_list);
@@ -775,7 +753,6 @@ int sta_info_flush(struct ieee80211_local *local,
 	unsigned long flags;
 
 	might_sleep();
-	ASSERT_RTNL();
 
 	spin_lock_irqsave(&local->sta_lock, flags);
 	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) {
@@ -795,39 +772,6 @@ int sta_info_flush(struct ieee80211_local *local,
 	return ret;
 }
 
-/**
- * sta_info_flush_delayed - flush matching STA entries from the STA table
- *
- * This function unlinks all stations for a given interface and queues
- * them for freeing. Note that the workqueue function scheduled here has
- * to run before any new keys can be added to the system to avoid set_key()
- * callback ordering issues.
- *
- * @sdata: the interface
- */
-void sta_info_flush_delayed(struct ieee80211_sub_if_data *sdata)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta, *tmp;
-	unsigned long flags;
-	bool work = false;
-
-	spin_lock_irqsave(&local->sta_lock, flags);
-	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) {
-		if (sdata == sta->sdata) {
-			__sta_info_unlink(&sta);
-			if (sta) {
-				list_add_tail(&sta->list,
-					      &local->sta_flush_list);
-				work = true;
-			}
-		}
-	}
-	if (work)
-		schedule_work(&local->sta_flush_work);
-	spin_unlock_irqrestore(&local->sta_lock, flags);
-}
-
 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			  unsigned long exp_time)
 {
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 5534d489f50..49a1a1f7651 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -88,6 +88,7 @@ struct tid_ampdu_tx {
  * struct tid_ampdu_rx - TID aggregation information (Rx).
  *
  * @reorder_buf: buffer to reorder incoming aggregated MPDUs
+ * @reorder_time: jiffies when skb was added
  * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
  * @head_seq_num: head sequence number in reordering buffer.
  * @stored_mpdu_num: number of MPDUs in reordering buffer
@@ -99,6 +100,7 @@ struct tid_ampdu_tx {
  */
 struct tid_ampdu_rx {
 	struct sk_buff **reorder_buf;
+	unsigned long *reorder_time;
 	struct timer_list session_timer;
 	u16 head_seq_num;
 	u16 stored_mpdu_num;
@@ -214,6 +216,7 @@ struct sta_ampdu_mlme {
  * @plink_state: peer link state
  * @plink_timeout: timeout of peer link
  * @plink_timer: peer link watch timer
+ * @plink_timer_was_running: used by suspend/resume to restore timers
  * @debugfs: debug filesystem info
  * @sta: station information we share with the driver
  */
@@ -291,6 +294,7 @@ struct sta_info {
 	__le16 reason;
 	u8 plink_retries;
 	bool ignore_plink_timer;
+	bool plink_timer_was_running;
 	enum plink_state plink_state;
 	u32 plink_timeout;
 	struct timer_list plink_timer;
@@ -442,8 +446,7 @@ void sta_info_init(struct ieee80211_local *local);
 int sta_info_start(struct ieee80211_local *local);
 void sta_info_stop(struct ieee80211_local *local);
 int sta_info_flush(struct ieee80211_local *local,
-		    struct ieee80211_sub_if_data *sdata);
-void sta_info_flush_delayed(struct ieee80211_sub_if_data *sdata);
+		   struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			  unsigned long exp_time);
 
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 38fa111d2dc..964b7faa7f1 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -13,6 +13,7 @@
 #include <asm/unaligned.h>
 
 #include <net/mac80211.h>
+#include "driver-ops.h"
 #include "key.h"
 #include "tkip.h"
 #include "wep.h"
@@ -307,9 +308,8 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm,
 			if (is_multicast_ether_addr(ra))
 				sta_addr = bcast;
 
-			key->local->ops->update_tkip_key(
-				local_to_hw(key->local), &key->conf,
-				sta_addr, iv32, key->u.tkip.rx[queue].p1k);
+			drv_update_tkip_key(key->local, &key->conf, sta_addr,
+					    iv32, key->u.tkip.rx[queue].p1k);
 		}
 	}
 
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 63656266d56..d238a8939a0 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -25,6 +25,7 @@
 #include <asm/unaligned.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "led.h"
 #include "mesh.h"
 #include "wep.h"
@@ -399,6 +400,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 			sta_info_set_tim_bit(sta);
 
 		info->control.jiffies = jiffies;
+		info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
 		skb_queue_tail(&sta->ps_tx_buf, tx->skb);
 		return TX_QUEUED;
 	}
@@ -409,8 +411,24 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 		       sta->sta.addr);
 	}
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-	clear_sta_flags(sta, WLAN_STA_PSPOLL);
+	if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) {
+		/*
+		 * The sleeping station with pending data is now snoozing.
+		 * It queried us for its buffered frames and will go back
+		 * to deep sleep once it got everything.
+		 *
+		 * inform the driver, in case the hardware does powersave
+		 * frame filtering and keeps a station  blacklist on its own
+		 * (e.g: p54), so that frames can be delivered unimpeded.
+		 *
+		 * Note: It should be safe to disable the filter now.
+		 * As, it is really unlikely that we still have any pending
+		 * frame for this station in the hw's buffers/fifos left,
+		 * that is not rejected with a unsuccessful tx_status yet.
+		 */
 
+		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+	}
 	return TX_CONTINUE;
 }
 
@@ -429,7 +447,7 @@ ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx)
 static ieee80211_tx_result debug_noinline
 ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 {
-	struct ieee80211_key *key;
+	struct ieee80211_key *key = NULL;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
 
@@ -500,7 +518,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
 
 	len = min_t(int, tx->skb->len + FCS_LEN,
-			 tx->local->fragmentation_threshold);
+			 tx->local->hw.wiphy->frag_threshold);
 
 	/* set up the tx rate control struct we give the RC algo */
 	txrc.hw = local_to_hw(tx->local);
@@ -511,8 +529,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx;
 
 	/* set up RTS protection if desired */
-	if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD &&
-	    len > tx->local->rts_threshold) {
+	if (len > tx->local->hw.wiphy->rts_threshold) {
 		txrc.rts = rts = true;
 	}
 
@@ -542,6 +559,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	if (unlikely(!info->control.rates[0].count))
 		info->control.rates[0].count = 1;
 
+	if (WARN_ON_ONCE((info->control.rates[0].count > 1) &&
+			 (info->flags & IEEE80211_TX_CTL_NO_ACK)))
+		info->control.rates[0].count = 1;
+
 	if (is_multicast_ether_addr(hdr->addr1)) {
 		/*
 		 * XXX: verify the rate is in the basic rateset
@@ -754,7 +775,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 	struct sk_buff *skb = tx->skb;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (void *)skb->data;
-	int frag_threshold = tx->local->fragmentation_threshold;
+	int frag_threshold = tx->local->hw.wiphy->frag_threshold;
 	int hdrlen;
 	int fragnum;
 
@@ -852,6 +873,8 @@ ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx)
 
 	do {
 		hdr = (void *) skb->data;
+		if (unlikely(ieee80211_is_pspoll(hdr->frame_control)))
+			break; /* must not overwrite AID */
 		next_len = skb->next ? skb->next->len : 0;
 		group_addr = is_multicast_ether_addr(hdr->addr1);
 
@@ -885,9 +908,8 @@ ieee80211_tx_h_stats(struct ieee80211_tx_data *tx)
  * deal with packet injection down monitor interface
  * with Radiotap Header -- only called for monitor mode interface
  */
-static ieee80211_tx_result
-__ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
-			      struct sk_buff *skb)
+static bool __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
+					  struct sk_buff *skb)
 {
 	/*
 	 * this is the moment to interpret and discard the radiotap header that
@@ -938,7 +960,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 				 * on transmission
 				 */
 				if (skb->len < (iterator.max_length + FCS_LEN))
-					return TX_DROP;
+					return false;
 
 				skb_trim(skb, skb->len - FCS_LEN);
 			}
@@ -960,7 +982,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 	}
 
 	if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
-		return TX_DROP;
+		return false;
 
 	/*
 	 * remove the radiotap header
@@ -969,7 +991,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 	 */
 	skb_pull(skb, iterator.max_length);
 
-	return TX_CONTINUE;
+	return true;
 }
 
 /*
@@ -1003,7 +1025,7 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 	/* process and remove the injection radiotap header */
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) {
-		if (__ieee80211_parse_tx_radiotap(tx, skb) == TX_DROP)
+		if (!__ieee80211_parse_tx_radiotap(tx, skb))
 			return TX_DROP;
 
 		/*
@@ -1067,12 +1089,15 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 		info->flags |= IEEE80211_TX_CTL_NO_ACK;
 	} else {
 		tx->flags |= IEEE80211_TX_UNICAST;
-		info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+		if (unlikely(local->wifi_wme_noack_test))
+			info->flags |= IEEE80211_TX_CTL_NO_ACK;
+		else
+			info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
 	}
 
 	if (tx->flags & IEEE80211_TX_FRAGMENTED) {
 		if ((tx->flags & IEEE80211_TX_UNICAST) &&
-		    skb->len + FCS_LEN > local->fragmentation_threshold &&
+		    skb->len + FCS_LEN > local->hw.wiphy->frag_threshold &&
 		    !(info->flags & IEEE80211_TX_CTL_AMPDU))
 			tx->flags |= IEEE80211_TX_FRAGMENTED;
 		else
@@ -1147,7 +1172,7 @@ static int __ieee80211_tx(struct ieee80211_local *local,
 
 		next = skb->next;
 		len = skb->len;
-		ret = local->ops->tx(local_to_hw(local), skb);
+		ret = drv_tx(local, skb);
 		if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) {
 			dev_kfree_skb(skb);
 			ret = NETDEV_TX_OK;
@@ -1213,7 +1238,6 @@ static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
 			 bool txpending)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct sta_info *sta;
 	struct ieee80211_tx_data tx;
 	ieee80211_tx_result res_prepare;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -1245,7 +1269,6 @@ static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
 		return;
 	}
 
-	sta = tx.sta;
 	tx.channel = local->hw.conf.channel;
 	info->band = tx.channel->band;
 
@@ -1392,7 +1415,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
-	    local->hw.conf.dynamic_ps_timeout > 0) {
+	    local->hw.conf.dynamic_ps_timeout > 0 &&
+	    !local->sw_scanning && !local->hw_scanning && local->ps_sdata) {
 		if (local->hw.conf.flags & IEEE80211_CONF_PS) {
 			ieee80211_stop_queues_by_reason(&local->hw,
 					IEEE80211_QUEUE_STOP_REASON_PS);
@@ -1591,7 +1615,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
-	int ret = 1, head_need;
+	int ret = NETDEV_TX_BUSY, head_need;
 	u16 ethertype, hdrlen,  meshhdrlen = 0;
 	__le16 fc;
 	struct ieee80211_hdr hdr;
@@ -2086,18 +2110,18 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
 		struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 		struct ieee80211_hdr *hdr;
+		struct sk_buff *presp = rcu_dereference(ifibss->presp);
 
-		if (!ifibss->probe_resp)
+		if (!presp)
 			goto out;
 
-		skb = skb_copy(ifibss->probe_resp, GFP_ATOMIC);
+		skb = skb_copy(presp, GFP_ATOMIC);
 		if (!skb)
 			goto out;
 
 		hdr = (struct ieee80211_hdr *) skb->data;
 		hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						 IEEE80211_STYPE_BEACON);
-
 	} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
 		struct ieee80211_mgmt *mgmt;
 		u8 *pos;
@@ -2117,7 +2141,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 		memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 		/* BSSID is left zeroed, wildcard value */
 		mgmt->u.beacon.beacon_int =
-			cpu_to_le16(local->hw.conf.beacon_int);
+			cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 		mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
 
 		pos = skb_put(skb, 2);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index fdf432f1455..66ce96a69f3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -20,27 +20,21 @@
 #include <linux/if_arp.h>
 #include <linux/wireless.h>
 #include <linux/bitmap.h>
+#include <linux/crc32.h>
 #include <net/net_namespace.h>
 #include <net/cfg80211.h>
 #include <net/rtnetlink.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "mesh.h"
 #include "wme.h"
+#include "led.h"
 
 /* privid for wiphys to determine whether they belong to us or not */
 void *mac80211_wiphy_privid = &mac80211_wiphy_privid;
 
-/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
-/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] __aligned(2) =
-	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-
-/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] __aligned(2) =
-	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-
 struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy)
 {
 	struct ieee80211_local *local;
@@ -100,70 +94,6 @@ u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
 	return NULL;
 }
 
-unsigned int ieee80211_hdrlen(__le16 fc)
-{
-	unsigned int hdrlen = 24;
-
-	if (ieee80211_is_data(fc)) {
-		if (ieee80211_has_a4(fc))
-			hdrlen = 30;
-		if (ieee80211_is_data_qos(fc))
-			hdrlen += IEEE80211_QOS_CTL_LEN;
-		goto out;
-	}
-
-	if (ieee80211_is_ctl(fc)) {
-		/*
-		 * ACK and CTS are 10 bytes, all others 16. To see how
-		 * to get this condition consider
-		 *   subtype mask:   0b0000000011110000 (0x00F0)
-		 *   ACK subtype:    0b0000000011010000 (0x00D0)
-		 *   CTS subtype:    0b0000000011000000 (0x00C0)
-		 *   bits that matter:         ^^^      (0x00E0)
-		 *   value of those: 0b0000000011000000 (0x00C0)
-		 */
-		if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
-			hdrlen = 10;
-		else
-			hdrlen = 16;
-	}
-out:
-	return hdrlen;
-}
-EXPORT_SYMBOL(ieee80211_hdrlen);
-
-unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
-{
-	const struct ieee80211_hdr *hdr = (const struct ieee80211_hdr *)skb->data;
-	unsigned int hdrlen;
-
-	if (unlikely(skb->len < 10))
-		return 0;
-	hdrlen = ieee80211_hdrlen(hdr->frame_control);
-	if (unlikely(hdrlen > skb->len))
-		return 0;
-	return hdrlen;
-}
-EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
-
-int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
-{
-	int ae = meshhdr->flags & IEEE80211S_FLAGS_AE;
-	/* 7.1.3.5a.2 */
-	switch (ae) {
-	case 0:
-		return 6;
-	case 1:
-		return 12;
-	case 2:
-		return 18;
-	case 3:
-		return 24;
-	default:
-		return 6;
-	}
-}
-
 void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx)
 {
 	struct sk_buff *skb = tx->skb;
@@ -411,6 +341,52 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue)
 }
 EXPORT_SYMBOL(ieee80211_stop_queue);
 
+void ieee80211_add_pending_skb(struct ieee80211_local *local,
+			       struct sk_buff *skb)
+{
+	struct ieee80211_hw *hw = &local->hw;
+	unsigned long flags;
+	int queue = skb_get_queue_mapping(skb);
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	__ieee80211_stop_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+	__ieee80211_stop_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_PENDING);
+	skb_queue_tail(&local->pending[queue], skb);
+	__ieee80211_wake_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+int ieee80211_add_pending_skbs(struct ieee80211_local *local,
+			       struct sk_buff_head *skbs)
+{
+	struct ieee80211_hw *hw = &local->hw;
+	struct sk_buff *skb;
+	unsigned long flags;
+	int queue, ret = 0, i;
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	for (i = 0; i < hw->queues; i++)
+		__ieee80211_stop_queue(hw, i,
+			IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+
+	while ((skb = skb_dequeue(skbs))) {
+		ret++;
+		queue = skb_get_queue_mapping(skb);
+		skb_queue_tail(&local->pending[queue], skb);
+	}
+
+	for (i = 0; i < hw->queues; i++) {
+		if (ret)
+			__ieee80211_stop_queue(hw, i,
+				IEEE80211_QUEUE_STOP_REASON_PENDING);
+		__ieee80211_wake_queue(hw, i,
+			IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+	}
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
+	return ret;
+}
+
 void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
 				    enum queue_stop_reason reason)
 {
@@ -536,8 +512,16 @@ EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
 void ieee802_11_parse_elems(u8 *start, size_t len,
 			    struct ieee802_11_elems *elems)
 {
+	ieee802_11_parse_elems_crc(start, len, elems, 0, 0);
+}
+
+u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
+			       struct ieee802_11_elems *elems,
+			       u64 filter, u32 crc)
+{
 	size_t left = len;
 	u8 *pos = start;
+	bool calc_crc = filter != 0;
 
 	memset(elems, 0, sizeof(*elems));
 	elems->ie_start = start;
@@ -551,7 +535,10 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 		left -= 2;
 
 		if (elen > left)
-			return;
+			break;
+
+		if (calc_crc && id < 64 && (filter & BIT(id)))
+			crc = crc32_be(crc, pos - 2, elen + 2);
 
 		switch (id) {
 		case WLAN_EID_SSID:
@@ -575,8 +562,10 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 			elems->cf_params_len = elen;
 			break;
 		case WLAN_EID_TIM:
-			elems->tim = pos;
-			elems->tim_len = elen;
+			if (elen >= sizeof(struct ieee80211_tim_ie)) {
+				elems->tim = (void *)pos;
+				elems->tim_len = elen;
+			}
 			break;
 		case WLAN_EID_IBSS_PARAMS:
 			elems->ibss_params = pos;
@@ -586,15 +575,20 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 			elems->challenge = pos;
 			elems->challenge_len = elen;
 			break;
-		case WLAN_EID_WPA:
+		case WLAN_EID_VENDOR_SPECIFIC:
 			if (elen >= 4 && pos[0] == 0x00 && pos[1] == 0x50 &&
 			    pos[2] == 0xf2) {
 				/* Microsoft OUI (00:50:F2) */
+
+				if (calc_crc)
+					crc = crc32_be(crc, pos - 2, elen + 2);
+
 				if (pos[3] == 1) {
 					/* OUI Type 1 - WPA IE */
 					elems->wpa = pos;
 					elems->wpa_len = elen;
 				} else if (elen >= 5 && pos[3] == 2) {
+					/* OUI Type 2 - WMM IE */
 					if (pos[4] == 0) {
 						elems->wmm_info = pos;
 						elems->wmm_info_len = elen;
@@ -679,32 +673,70 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 		left -= elen;
 		pos += elen;
 	}
+
+	return crc;
 }
 
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_tx_queue_params qparam;
-	int i;
+	int queue;
+	bool use_11b;
+	int aCWmin, aCWmax;
 
 	if (!local->ops->conf_tx)
 		return;
 
 	memset(&qparam, 0, sizeof(qparam));
 
-	qparam.aifs = 2;
+	use_11b = (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ) &&
+		 !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE);
 
-	if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
-	    !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE))
-		qparam.cw_min = 31;
-	else
-		qparam.cw_min = 15;
-
-	qparam.cw_max = 1023;
-	qparam.txop = 0;
+	for (queue = 0; queue < local_to_hw(local)->queues; queue++) {
+		/* Set defaults according to 802.11-2007 Table 7-37 */
+		aCWmax = 1023;
+		if (use_11b)
+			aCWmin = 31;
+		else
+			aCWmin = 15;
+
+		switch (queue) {
+		case 3: /* AC_BK */
+			qparam.cw_max = aCWmax;
+			qparam.cw_min = aCWmin;
+			qparam.txop = 0;
+			qparam.aifs = 7;
+			break;
+		default: /* never happens but let's not leave undefined */
+		case 2: /* AC_BE */
+			qparam.cw_max = aCWmax;
+			qparam.cw_min = aCWmin;
+			qparam.txop = 0;
+			qparam.aifs = 3;
+			break;
+		case 1: /* AC_VI */
+			qparam.cw_max = aCWmin;
+			qparam.cw_min = (aCWmin + 1) / 2 - 1;
+			if (use_11b)
+				qparam.txop = 6016/32;
+			else
+				qparam.txop = 3008/32;
+			qparam.aifs = 2;
+			break;
+		case 0: /* AC_VO */
+			qparam.cw_max = (aCWmin + 1) / 2 - 1;
+			qparam.cw_min = (aCWmin + 1) / 4 - 1;
+			if (use_11b)
+				qparam.txop = 3264/32;
+			else
+				qparam.txop = 1504/32;
+			qparam.aifs = 2;
+			break;
+		}
 
-	for (i = 0; i < local_to_hw(local)->queues; i++)
-		local->ops->conf_tx(local_to_hw(local), i, &qparam);
+		drv_conf_tx(local, queue, &qparam);
+	}
 }
 
 void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
@@ -831,16 +863,73 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 	ieee80211_tx_skb(sdata, skb, encrypt);
 }
 
+int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+			     const u8 *ie, size_t ie_len)
+{
+	struct ieee80211_supported_band *sband;
+	u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
+	int i;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	pos = buffer;
+
+	*pos++ = WLAN_EID_SUPP_RATES;
+	supp_rates_len = pos;
+	*pos++ = 0;
+
+	for (i = 0; i < sband->n_bitrates; i++) {
+		struct ieee80211_rate *rate = &sband->bitrates[i];
+
+		if (esupp_rates_len) {
+			*esupp_rates_len += 1;
+		} else if (*supp_rates_len == 8) {
+			*pos++ = WLAN_EID_EXT_SUPP_RATES;
+			esupp_rates_len = pos;
+			*pos++ = 1;
+		} else
+			*supp_rates_len += 1;
+
+		*pos++ = rate->bitrate / 5;
+	}
+
+	if (sband->ht_cap.ht_supported) {
+		__le16 tmp = cpu_to_le16(sband->ht_cap.cap);
+
+		*pos++ = WLAN_EID_HT_CAPABILITY;
+		*pos++ = sizeof(struct ieee80211_ht_cap);
+		memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+		memcpy(pos, &tmp, sizeof(u16));
+		pos += sizeof(u16);
+		/* TODO: needs a define here for << 2 */
+		*pos++ = sband->ht_cap.ampdu_factor |
+			 (sband->ht_cap.ampdu_density << 2);
+		memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+		pos += sizeof(sband->ht_cap.mcs);
+		pos += 2 + 4 + 1; /* ext info, BF cap, antsel */
+	}
+
+	/*
+	 * If adding more here, adjust code in main.c
+	 * that calculates local->scan_ies_len.
+	 */
+
+	if (ie) {
+		memcpy(pos, ie, ie_len);
+		pos += ie_len;
+	}
+
+	return pos - buffer;
+}
+
 void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
-			      u8 *ssid, size_t ssid_len,
-			      u8 *ie, size_t ie_len)
+			      const u8 *ssid, size_t ssid_len,
+			      const u8 *ie, size_t ie_len)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_supported_band *sband;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
-	u8 *pos, *supp_rates, *esupp_rates = NULL;
-	int i;
+	u8 *pos;
 
 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + 200 +
 			    ie_len);
@@ -867,31 +956,9 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
 	*pos++ = WLAN_EID_SSID;
 	*pos++ = ssid_len;
 	memcpy(pos, ssid, ssid_len);
+	pos += ssid_len;
 
-	supp_rates = skb_put(skb, 2);
-	supp_rates[0] = WLAN_EID_SUPP_RATES;
-	supp_rates[1] = 0;
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		struct ieee80211_rate *rate = &sband->bitrates[i];
-		if (esupp_rates) {
-			pos = skb_put(skb, 1);
-			esupp_rates[1]++;
-		} else if (supp_rates[1] == 8) {
-			esupp_rates = skb_put(skb, 3);
-			esupp_rates[0] = WLAN_EID_EXT_SUPP_RATES;
-			esupp_rates[1] = 1;
-			pos = &esupp_rates[2];
-		} else {
-			pos = skb_put(skb, 1);
-			supp_rates[1]++;
-		}
-		*pos = rate->bitrate / 5;
-	}
-
-	if (ie)
-		memcpy(skb_put(skb, ie_len), ie, ie_len);
+	skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len));
 
 	ieee80211_tx_skb(sdata, skb, 0);
 }
@@ -931,3 +998,151 @@ u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
 	}
 	return supp_rates;
 }
+
+int ieee80211_reconfig(struct ieee80211_local *local)
+{
+	struct ieee80211_hw *hw = &local->hw;
+	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_if_init_conf conf;
+	struct sta_info *sta;
+	unsigned long flags;
+	int res;
+	bool from_suspend = local->suspended;
+
+	/*
+	 * We're going to start the hardware, at that point
+	 * we are no longer suspended and can RX frames.
+	 */
+	local->suspended = false;
+
+	/* restart hardware */
+	if (local->open_count) {
+		res = drv_start(local);
+
+		ieee80211_led_radio(local, true);
+	}
+
+	/* add interfaces */
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+		    netif_running(sdata->dev)) {
+			conf.vif = &sdata->vif;
+			conf.type = sdata->vif.type;
+			conf.mac_addr = sdata->dev->dev_addr;
+			res = drv_add_interface(local, &conf);
+		}
+	}
+
+	/* add STAs back */
+	if (local->ops->sta_notify) {
+		spin_lock_irqsave(&local->sta_lock, flags);
+		list_for_each_entry(sta, &local->sta_list, list) {
+			sdata = sta->sdata;
+			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+				sdata = container_of(sdata->bss,
+					     struct ieee80211_sub_if_data,
+					     u.ap);
+
+			drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD,
+				       &sta->sta);
+		}
+		spin_unlock_irqrestore(&local->sta_lock, flags);
+	}
+
+	/* Clear Suspend state so that ADDBA requests can be processed */
+
+	rcu_read_lock();
+
+	if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
+		list_for_each_entry_rcu(sta, &local->sta_list, list) {
+			clear_sta_flags(sta, WLAN_STA_SUSPEND);
+		}
+	}
+
+	rcu_read_unlock();
+
+	/* setup RTS threshold */
+	drv_set_rts_threshold(local, hw->wiphy->rts_threshold);
+
+	/* reconfigure hardware */
+	ieee80211_hw_config(local, ~0);
+
+	netif_addr_lock_bh(local->mdev);
+	ieee80211_configure_filter(local);
+	netif_addr_unlock_bh(local->mdev);
+
+	/* Finally also reconfigure all the BSS information */
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		u32 changed = ~0;
+		if (!netif_running(sdata->dev))
+			continue;
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_STATION:
+			/* disable beacon change bits */
+			changed &= ~(BSS_CHANGED_BEACON |
+				     BSS_CHANGED_BEACON_ENABLED);
+			/* fall through */
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
+			ieee80211_bss_info_change_notify(sdata, changed);
+			break;
+		case NL80211_IFTYPE_WDS:
+			break;
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_MONITOR:
+			/* ignore virtual */
+			break;
+		case NL80211_IFTYPE_UNSPECIFIED:
+		case __NL80211_IFTYPE_AFTER_LAST:
+			WARN_ON(1);
+			break;
+		}
+	}
+
+	/* add back keys */
+	list_for_each_entry(sdata, &local->interfaces, list)
+		if (netif_running(sdata->dev))
+			ieee80211_enable_keys(sdata);
+
+	ieee80211_wake_queues_by_reason(hw,
+			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+	/*
+	 * If this is for hw restart things are still running.
+	 * We may want to change that later, however.
+	 */
+	if (!from_suspend)
+		return 0;
+
+#ifdef CONFIG_PM
+	local->suspended = false;
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		switch(sdata->vif.type) {
+		case NL80211_IFTYPE_STATION:
+			ieee80211_sta_restart(sdata);
+			break;
+		case NL80211_IFTYPE_ADHOC:
+			ieee80211_ibss_restart(sdata);
+			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			ieee80211_mesh_restart(sdata);
+			break;
+		default:
+			break;
+		}
+	}
+
+	add_timer(&local->sta_cleanup);
+
+	spin_lock_irqsave(&local->sta_lock, flags);
+	list_for_each_entry(sta, &local->sta_list, list)
+		mesh_plink_restart(sta);
+	spin_unlock_irqrestore(&local->sta_lock, flags);
+#else
+	WARN_ON(1);
+#endif
+	return 0;
+}
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 959aa8379cc..d2d81b10334 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -27,100 +27,6 @@
 #include "aes_ccm.h"
 
 
-static int ieee80211_set_encryption(struct ieee80211_sub_if_data *sdata, u8 *sta_addr,
-				    int idx, int alg, int remove,
-				    int set_tx_key, const u8 *_key,
-				    size_t key_len)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta;
-	struct ieee80211_key *key;
-	int err;
-
-	if (alg == ALG_AES_CMAC) {
-		if (idx < NUM_DEFAULT_KEYS ||
-		    idx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) {
-			printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d "
-			       "(BIP)\n", sdata->dev->name, idx);
-			return -EINVAL;
-		}
-	} else if (idx < 0 || idx >= NUM_DEFAULT_KEYS) {
-		printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d\n",
-		       sdata->dev->name, idx);
-		return -EINVAL;
-	}
-
-	if (remove) {
-		rcu_read_lock();
-
-		err = 0;
-
-		if (is_broadcast_ether_addr(sta_addr)) {
-			key = sdata->keys[idx];
-		} else {
-			sta = sta_info_get(local, sta_addr);
-			if (!sta) {
-				err = -ENOENT;
-				goto out_unlock;
-			}
-			key = sta->key;
-		}
-
-		ieee80211_key_free(key);
-	} else {
-		key = ieee80211_key_alloc(alg, idx, key_len, _key);
-		if (!key)
-			return -ENOMEM;
-
-		sta = NULL;
-		err = 0;
-
-		rcu_read_lock();
-
-		if (!is_broadcast_ether_addr(sta_addr)) {
-			set_tx_key = 0;
-			/*
-			 * According to the standard, the key index of a
-			 * pairwise key must be zero. However, some AP are
-			 * broken when it comes to WEP key indices, so we
-			 * work around this.
-			 */
-			if (idx != 0 && alg != ALG_WEP) {
-				ieee80211_key_free(key);
-				err = -EINVAL;
-				goto out_unlock;
-			}
-
-			sta = sta_info_get(local, sta_addr);
-			if (!sta) {
-				ieee80211_key_free(key);
-				err = -ENOENT;
-				goto out_unlock;
-			}
-		}
-
-		if (alg == ALG_WEP &&
-			key_len != LEN_WEP40 && key_len != LEN_WEP104) {
-			ieee80211_key_free(key);
-			err = -EINVAL;
-			goto out_unlock;
-		}
-
-		ieee80211_key_link(key, sdata, sta);
-
-		if (set_tx_key || (!sta && !sdata->default_key && key))
-			ieee80211_set_default_key(sdata, idx);
-		if (alg == ALG_AES_CMAC &&
-		    (set_tx_key || (!sta && !sdata->default_mgmt_key && key)))
-			ieee80211_set_default_mgmt_key(sdata, idx);
-	}
-
- out_unlock:
-	rcu_read_unlock();
-
-	return err;
-}
-
 static int ieee80211_ioctl_siwgenie(struct net_device *dev,
 				    struct iw_request_info *info,
 				    struct iw_point *data, char *extra)
@@ -131,11 +37,13 @@ static int ieee80211_ioctl_siwgenie(struct net_device *dev,
 
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		int ret = ieee80211_sta_set_extra_ie(sdata, extra, data->length);
-		if (ret)
+		if (ret && ret != -EALREADY)
 			return ret;
 		sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
 		sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
-		ieee80211_sta_req_auth(sdata);
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
+		if (ret != -EALREADY)
+			ieee80211_sta_req_auth(sdata);
 		return 0;
 	}
 
@@ -149,17 +57,14 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		sdata->u.ibss.flags &= ~IEEE80211_IBSS_AUTO_CHANNEL_SEL;
+		return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
 	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_CHANNEL_SEL;
 
 	/* freq->e == 0: freq->m = channel; otherwise freq = m * 10^e */
 	if (freq->e == 0) {
 		if (freq->m < 0) {
-			if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-				sdata->u.ibss.flags |=
-					IEEE80211_IBSS_AUTO_CHANNEL_SEL;
-			else if (sdata->vif.type == NL80211_IFTYPE_STATION)
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
 				sdata->u.mgd.flags |=
 					IEEE80211_STA_AUTO_CHANNEL_SEL;
 			return 0;
@@ -183,8 +88,12 @@ static int ieee80211_ioctl_giwfreq(struct net_device *dev,
 				   struct iw_freq *freq, char *extra)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	freq->m = local->hw.conf.channel->center_freq;
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
+
+	freq->m = local->oper_channel->center_freq;
 	freq->e = 6;
 
 	return 0;
@@ -195,15 +104,17 @@ static int ieee80211_ioctl_siwessid(struct net_device *dev,
 				    struct iw_request_info *info,
 				    struct iw_point *data, char *ssid)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	size_t len = data->length;
 	int ret;
 
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
+
 	/* iwconfig uses nul termination in SSID.. */
 	if (len > 0 && ssid[len - 1] == '\0')
 		len--;
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		if (data->flags)
 			sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
@@ -215,10 +126,10 @@ static int ieee80211_ioctl_siwessid(struct net_device *dev,
 			return ret;
 
 		sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
 		ieee80211_sta_req_auth(sdata);
 		return 0;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		return ieee80211_ibss_set_ssid(sdata, ssid, len);
+	}
 
 	return -EOPNOTSUPP;
 }
@@ -229,9 +140,13 @@ static int ieee80211_ioctl_giwessid(struct net_device *dev,
 				    struct iw_point *data, char *ssid)
 {
 	size_t len;
-
 	struct ieee80211_sub_if_data *sdata;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
+
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		int res = ieee80211_sta_get_ssid(sdata, ssid, &len);
 		if (res == 0) {
@@ -240,14 +155,6 @@ static int ieee80211_ioctl_giwessid(struct net_device *dev,
 		} else
 			data->flags = 0;
 		return res;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		int res = ieee80211_ibss_get_ssid(sdata, ssid, &len);
-		if (res == 0) {
-			data->length = len;
-			data->flags = 1;
-		} else
-			data->flags = 0;
-		return res;
 	}
 
 	return -EOPNOTSUPP;
@@ -258,9 +165,11 @@ static int ieee80211_ioctl_siwap(struct net_device *dev,
 				 struct iw_request_info *info,
 				 struct sockaddr *ap_addr, char *extra)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		int ret;
 
@@ -275,18 +184,9 @@ static int ieee80211_ioctl_siwap(struct net_device *dev,
 		if (ret)
 			return ret;
 		sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
 		ieee80211_sta_req_auth(sdata);
 		return 0;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		if (is_zero_ether_addr((u8 *) &ap_addr->sa_data))
-			sdata->u.ibss.flags |= IEEE80211_IBSS_AUTO_BSSID_SEL |
-					       IEEE80211_IBSS_AUTO_CHANNEL_SEL;
-		else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
-			sdata->u.ibss.flags |= IEEE80211_IBSS_AUTO_BSSID_SEL;
-		else
-			sdata->u.ibss.flags &= ~IEEE80211_IBSS_AUTO_BSSID_SEL;
-
-		return ieee80211_ibss_set_bssid(sdata, (u8 *) &ap_addr->sa_data);
 	} else if (sdata->vif.type == NL80211_IFTYPE_WDS) {
 		/*
 		 * If it is necessary to update the WDS peer address
@@ -312,9 +212,11 @@ static int ieee80211_ioctl_giwap(struct net_device *dev,
 				 struct iw_request_info *info,
 				 struct sockaddr *ap_addr, char *extra)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		if (sdata->u.mgd.state == IEEE80211_STA_MLME_ASSOCIATED) {
 			ap_addr->sa_family = ARPHRD_ETHER;
@@ -322,13 +224,6 @@ static int ieee80211_ioctl_giwap(struct net_device *dev,
 		} else
 			memset(&ap_addr->sa_data, 0, ETH_ALEN);
 		return 0;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		if (sdata->u.ibss.state == IEEE80211_IBSS_MLME_JOINED) {
-			ap_addr->sa_family = ARPHRD_ETHER;
-			memcpy(&ap_addr->sa_data, sdata->u.ibss.bssid, ETH_ALEN);
-		} else
-			memset(&ap_addr->sa_data, 0, ETH_ALEN);
-		return 0;
 	} else if (sdata->vif.type == NL80211_IFTYPE_WDS) {
 		ap_addr->sa_family = ARPHRD_ETHER;
 		memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
@@ -411,334 +306,6 @@ static int ieee80211_ioctl_giwrate(struct net_device *dev,
 	return 0;
 }
 
-static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
-				      struct iw_request_info *info,
-				      union iwreq_data *data, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_channel* chan = local->hw.conf.channel;
-	bool reconf = false;
-	u32 reconf_flags = 0;
-	int new_power_level;
-
-	if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
-		return -EINVAL;
-	if (data->txpower.flags & IW_TXPOW_RANGE)
-		return -EINVAL;
-	if (!chan)
-		return -EINVAL;
-
-	/* only change when not disabling */
-	if (!data->txpower.disabled) {
-		if (data->txpower.fixed) {
-			if (data->txpower.value < 0)
-				return -EINVAL;
-			new_power_level = data->txpower.value;
-			/*
-			 * Debatable, but we cannot do a fixed power
-			 * level above the regulatory constraint.
-			 * Use "iwconfig wlan0 txpower 15dBm" instead.
-			 */
-			if (new_power_level > chan->max_power)
-				return -EINVAL;
-		} else {
-			/*
-			 * Automatic power level setting, max being the value
-			 * passed in from userland.
-			 */
-			if (data->txpower.value < 0)
-				new_power_level = -1;
-			else
-				new_power_level = data->txpower.value;
-		}
-
-		reconf = true;
-
-		/*
-		 * ieee80211_hw_config() will limit to the channel's
-		 * max power and possibly power constraint from AP.
-		 */
-		local->user_power_level = new_power_level;
-	}
-
-	if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
-		local->hw.conf.radio_enabled = !(data->txpower.disabled);
-		reconf_flags |= IEEE80211_CONF_CHANGE_RADIO_ENABLED;
-		ieee80211_led_radio(local, local->hw.conf.radio_enabled);
-	}
-
-	if (reconf || reconf_flags)
-		ieee80211_hw_config(local, reconf_flags);
-
-	return 0;
-}
-
-static int ieee80211_ioctl_giwtxpower(struct net_device *dev,
-				   struct iw_request_info *info,
-				   union iwreq_data *data, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	data->txpower.fixed = 1;
-	data->txpower.disabled = !(local->hw.conf.radio_enabled);
-	data->txpower.value = local->hw.conf.power_level;
-	data->txpower.flags = IW_TXPOW_DBM;
-
-	return 0;
-}
-
-static int ieee80211_ioctl_siwrts(struct net_device *dev,
-				  struct iw_request_info *info,
-				  struct iw_param *rts, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	if (rts->disabled)
-		local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
-	else if (!rts->fixed)
-		/* if the rts value is not fixed, then take default */
-		local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
-	else if (rts->value < 0 || rts->value > IEEE80211_MAX_RTS_THRESHOLD)
-		return -EINVAL;
-	else
-		local->rts_threshold = rts->value;
-
-	/* If the wlan card performs RTS/CTS in hardware/firmware,
-	 * configure it here */
-
-	if (local->ops->set_rts_threshold)
-		local->ops->set_rts_threshold(local_to_hw(local),
-					     local->rts_threshold);
-
-	return 0;
-}
-
-static int ieee80211_ioctl_giwrts(struct net_device *dev,
-				  struct iw_request_info *info,
-				  struct iw_param *rts, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	rts->value = local->rts_threshold;
-	rts->disabled = (rts->value >= IEEE80211_MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-
-static int ieee80211_ioctl_siwfrag(struct net_device *dev,
-				   struct iw_request_info *info,
-				   struct iw_param *frag, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	if (frag->disabled)
-		local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
-	else if (!frag->fixed)
-		local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
-	else if (frag->value < 256 ||
-		 frag->value > IEEE80211_MAX_FRAG_THRESHOLD)
-		return -EINVAL;
-	else {
-		/* Fragment length must be even, so strip LSB. */
-		local->fragmentation_threshold = frag->value & ~0x1;
-	}
-
-	return 0;
-}
-
-static int ieee80211_ioctl_giwfrag(struct net_device *dev,
-				   struct iw_request_info *info,
-				   struct iw_param *frag, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	frag->value = local->fragmentation_threshold;
-	frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	return 0;
-}
-
-
-static int ieee80211_ioctl_siwretry(struct net_device *dev,
-				    struct iw_request_info *info,
-				    struct iw_param *retry, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	if (retry->disabled ||
-	    (retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
-		return -EINVAL;
-
-	if (retry->flags & IW_RETRY_MAX) {
-		local->hw.conf.long_frame_max_tx_count = retry->value;
-	} else if (retry->flags & IW_RETRY_MIN) {
-		local->hw.conf.short_frame_max_tx_count = retry->value;
-	} else {
-		local->hw.conf.long_frame_max_tx_count = retry->value;
-		local->hw.conf.short_frame_max_tx_count = retry->value;
-	}
-
-	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
-
-	return 0;
-}
-
-
-static int ieee80211_ioctl_giwretry(struct net_device *dev,
-				    struct iw_request_info *info,
-				    struct iw_param *retry, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	retry->disabled = 0;
-	if (retry->flags == 0 || retry->flags & IW_RETRY_MIN) {
-		/* first return min value, iwconfig will ask max value
-		 * later if needed */
-		retry->flags |= IW_RETRY_LIMIT;
-		retry->value = local->hw.conf.short_frame_max_tx_count;
-		if (local->hw.conf.long_frame_max_tx_count !=
-		    local->hw.conf.short_frame_max_tx_count)
-			retry->flags |= IW_RETRY_MIN;
-		return 0;
-	}
-	if (retry->flags & IW_RETRY_MAX) {
-		retry->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
-		retry->value = local->hw.conf.long_frame_max_tx_count;
-	}
-
-	return 0;
-}
-
-static int ieee80211_ioctl_siwmlme(struct net_device *dev,
-				   struct iw_request_info *info,
-				   struct iw_point *data, char *extra)
-{
-	struct ieee80211_sub_if_data *sdata;
-	struct iw_mlme *mlme = (struct iw_mlme *) extra;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	if (!(sdata->vif.type == NL80211_IFTYPE_STATION))
-		return -EINVAL;
-
-	switch (mlme->cmd) {
-	case IW_MLME_DEAUTH:
-		/* TODO: mlme->addr.sa_data */
-		return ieee80211_sta_deauthenticate(sdata, mlme->reason_code);
-	case IW_MLME_DISASSOC:
-		/* TODO: mlme->addr.sa_data */
-		return ieee80211_sta_disassociate(sdata, mlme->reason_code);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-
-static int ieee80211_ioctl_siwencode(struct net_device *dev,
-				     struct iw_request_info *info,
-				     struct iw_point *erq, char *keybuf)
-{
-	struct ieee80211_sub_if_data *sdata;
-	int idx, i, alg = ALG_WEP;
-	u8 bcaddr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-	int remove = 0, ret;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
-	idx = erq->flags & IW_ENCODE_INDEX;
-	if (idx == 0) {
-		if (sdata->default_key)
-			for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
-				if (sdata->default_key == sdata->keys[i]) {
-					idx = i;
-					break;
-				}
-			}
-	} else if (idx < 1 || idx > 4)
-		return -EINVAL;
-	else
-		idx--;
-
-	if (erq->flags & IW_ENCODE_DISABLED)
-		remove = 1;
-	else if (erq->length == 0) {
-		/* No key data - just set the default TX key index */
-		ieee80211_set_default_key(sdata, idx);
-		return 0;
-	}
-
-	ret = ieee80211_set_encryption(
-		sdata, bcaddr,
-		idx, alg, remove,
-		!sdata->default_key,
-		keybuf, erq->length);
-
-	if (!ret) {
-		if (remove)
-			sdata->u.mgd.flags &= ~IEEE80211_STA_TKIP_WEP_USED;
-		else
-			sdata->u.mgd.flags |= IEEE80211_STA_TKIP_WEP_USED;
-	}
-
-	return ret;
-}
-
-
-static int ieee80211_ioctl_giwencode(struct net_device *dev,
-				     struct iw_request_info *info,
-				     struct iw_point *erq, char *key)
-{
-	struct ieee80211_sub_if_data *sdata;
-	int idx, i;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
-	idx = erq->flags & IW_ENCODE_INDEX;
-	if (idx < 1 || idx > 4) {
-		idx = -1;
-		if (!sdata->default_key)
-			idx = 0;
-		else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
-			if (sdata->default_key == sdata->keys[i]) {
-				idx = i;
-				break;
-			}
-		}
-		if (idx < 0)
-			return -EINVAL;
-	} else
-		idx--;
-
-	erq->flags = idx + 1;
-
-	if (!sdata->keys[idx]) {
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_DISABLED;
-		return 0;
-	}
-
-	memcpy(key, sdata->keys[idx]->conf.key,
-	       min_t(int, erq->length, sdata->keys[idx]->conf.keylen));
-	erq->length = sdata->keys[idx]->conf.keylen;
-	erq->flags |= IW_ENCODE_ENABLED;
-
-	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-		switch (sdata->u.mgd.auth_alg) {
-		case WLAN_AUTH_OPEN:
-		case WLAN_AUTH_LEAP:
-			erq->flags |= IW_ENCODE_OPEN;
-			break;
-		case WLAN_AUTH_SHARED_KEY:
-			erq->flags |= IW_ENCODE_RESTRICTED;
-			break;
-		}
-	}
-
-	return 0;
-}
-
 static int ieee80211_ioctl_siwpower(struct net_device *dev,
 				    struct iw_request_info *info,
 				    struct iw_param *wrq,
@@ -747,7 +314,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_conf *conf = &local->hw.conf;
-	int ret = 0, timeout = 0;
+	int timeout = 0;
 	bool ps;
 
 	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
@@ -779,42 +346,18 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 		timeout = wrq->value / 1000;
 
  set:
-	if (ps == local->powersave && timeout == conf->dynamic_ps_timeout)
-		return ret;
+	if (ps == sdata->u.mgd.powersave && timeout == conf->dynamic_ps_timeout)
+		return 0;
 
-	local->powersave = ps;
+	sdata->u.mgd.powersave = ps;
 	conf->dynamic_ps_timeout = timeout;
 
 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
-		ret = ieee80211_hw_config(local,
-					  IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT);
-
-	if (!(sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED))
-		return ret;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 
-	if (conf->dynamic_ps_timeout > 0 &&
-	    !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
-		mod_timer(&local->dynamic_ps_timer, jiffies +
-			  msecs_to_jiffies(conf->dynamic_ps_timeout));
-	} else {
-		if (local->powersave) {
-			if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
-				ieee80211_send_nullfunc(local, sdata, 1);
-			conf->flags |= IEEE80211_CONF_PS;
-			ret = ieee80211_hw_config(local,
-					IEEE80211_CONF_CHANGE_PS);
-		} else {
-			conf->flags &= ~IEEE80211_CONF_PS;
-			ret = ieee80211_hw_config(local,
-					IEEE80211_CONF_CHANGE_PS);
-			if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
-				ieee80211_send_nullfunc(local, sdata, 0);
-			del_timer_sync(&local->dynamic_ps_timer);
-			cancel_work_sync(&local->dynamic_ps_enable_work);
-		}
-	}
+	ieee80211_recalc_ps(local, -1);
 
-	return ret;
+	return 0;
 }
 
 static int ieee80211_ioctl_giwpower(struct net_device *dev,
@@ -822,9 +365,9 @@ static int ieee80211_ioctl_giwpower(struct net_device *dev,
 				    union iwreq_data *wrqu,
 				    char *extra)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	wrqu->power.disabled = !local->powersave;
+	wrqu->power.disabled = !sdata->u.mgd.powersave;
 
 	return 0;
 }
@@ -997,82 +540,6 @@ static int ieee80211_ioctl_giwauth(struct net_device *dev,
 }
 
 
-static int ieee80211_ioctl_siwencodeext(struct net_device *dev,
-					struct iw_request_info *info,
-					struct iw_point *erq, char *extra)
-{
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
-	int uninitialized_var(alg), idx, i, remove = 0;
-
-	switch (ext->alg) {
-	case IW_ENCODE_ALG_NONE:
-		remove = 1;
-		break;
-	case IW_ENCODE_ALG_WEP:
-		alg = ALG_WEP;
-		break;
-	case IW_ENCODE_ALG_TKIP:
-		alg = ALG_TKIP;
-		break;
-	case IW_ENCODE_ALG_CCMP:
-		alg = ALG_CCMP;
-		break;
-	case IW_ENCODE_ALG_AES_CMAC:
-		alg = ALG_AES_CMAC;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	if (erq->flags & IW_ENCODE_DISABLED)
-		remove = 1;
-
-	idx = erq->flags & IW_ENCODE_INDEX;
-	if (alg == ALG_AES_CMAC) {
-		if (idx < NUM_DEFAULT_KEYS + 1 ||
-		    idx > NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) {
-			idx = -1;
-			if (!sdata->default_mgmt_key)
-				idx = 0;
-			else for (i = NUM_DEFAULT_KEYS;
-				  i < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS;
-				  i++) {
-				if (sdata->default_mgmt_key == sdata->keys[i])
-				{
-					idx = i;
-					break;
-				}
-			}
-			if (idx < 0)
-				return -EINVAL;
-		} else
-			idx--;
-	} else {
-		if (idx < 1 || idx > 4) {
-			idx = -1;
-			if (!sdata->default_key)
-				idx = 0;
-			else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
-				if (sdata->default_key == sdata->keys[i]) {
-					idx = i;
-					break;
-				}
-			}
-			if (idx < 0)
-				return -EINVAL;
-		} else
-			idx--;
-	}
-
-	return ieee80211_set_encryption(sdata, ext->addr.sa_data, idx, alg,
-					remove,
-					ext->ext_flags &
-					IW_ENCODE_EXT_SET_TX_KEY,
-					ext->key, ext->key_len);
-}
-
-
 /* Structures to export the Wireless Handlers */
 
 static const iw_handler ieee80211_handler[] =
@@ -1099,7 +566,7 @@ static const iw_handler ieee80211_handler[] =
 	(iw_handler) NULL,				/* SIOCGIWTHRSPY */
 	(iw_handler) ieee80211_ioctl_siwap,		/* SIOCSIWAP */
 	(iw_handler) ieee80211_ioctl_giwap,		/* SIOCGIWAP */
-	(iw_handler) ieee80211_ioctl_siwmlme,		/* SIOCSIWMLME */
+	(iw_handler) cfg80211_wext_siwmlme,		/* SIOCSIWMLME */
 	(iw_handler) NULL,				/* SIOCGIWAPLIST */
 	(iw_handler) cfg80211_wext_siwscan,		/* SIOCSIWSCAN */
 	(iw_handler) cfg80211_wext_giwscan,		/* SIOCGIWSCAN */
@@ -1111,16 +578,16 @@ static const iw_handler ieee80211_handler[] =
 	(iw_handler) NULL,				/* -- hole -- */
 	(iw_handler) ieee80211_ioctl_siwrate,		/* SIOCSIWRATE */
 	(iw_handler) ieee80211_ioctl_giwrate,		/* SIOCGIWRATE */
-	(iw_handler) ieee80211_ioctl_siwrts,		/* SIOCSIWRTS */
-	(iw_handler) ieee80211_ioctl_giwrts,		/* SIOCGIWRTS */
-	(iw_handler) ieee80211_ioctl_siwfrag,		/* SIOCSIWFRAG */
-	(iw_handler) ieee80211_ioctl_giwfrag,		/* SIOCGIWFRAG */
-	(iw_handler) ieee80211_ioctl_siwtxpower,	/* SIOCSIWTXPOW */
-	(iw_handler) ieee80211_ioctl_giwtxpower,	/* SIOCGIWTXPOW */
-	(iw_handler) ieee80211_ioctl_siwretry,		/* SIOCSIWRETRY */
-	(iw_handler) ieee80211_ioctl_giwretry,		/* SIOCGIWRETRY */
-	(iw_handler) ieee80211_ioctl_siwencode,		/* SIOCSIWENCODE */
-	(iw_handler) ieee80211_ioctl_giwencode,		/* SIOCGIWENCODE */
+	(iw_handler) cfg80211_wext_siwrts,		/* SIOCSIWRTS */
+	(iw_handler) cfg80211_wext_giwrts,		/* SIOCGIWRTS */
+	(iw_handler) cfg80211_wext_siwfrag,		/* SIOCSIWFRAG */
+	(iw_handler) cfg80211_wext_giwfrag,		/* SIOCGIWFRAG */
+	(iw_handler) cfg80211_wext_siwtxpower,		/* SIOCSIWTXPOW */
+	(iw_handler) cfg80211_wext_giwtxpower,		/* SIOCGIWTXPOW */
+	(iw_handler) cfg80211_wext_siwretry,		/* SIOCSIWRETRY */
+	(iw_handler) cfg80211_wext_giwretry,		/* SIOCGIWRETRY */
+	(iw_handler) cfg80211_wext_siwencode,		/* SIOCSIWENCODE */
+	(iw_handler) cfg80211_wext_giwencode,		/* SIOCGIWENCODE */
 	(iw_handler) ieee80211_ioctl_siwpower,		/* SIOCSIWPOWER */
 	(iw_handler) ieee80211_ioctl_giwpower,		/* SIOCGIWPOWER */
 	(iw_handler) NULL,				/* -- hole -- */
@@ -1129,7 +596,7 @@ static const iw_handler ieee80211_handler[] =
 	(iw_handler) NULL,				/* SIOCGIWGENIE */
 	(iw_handler) ieee80211_ioctl_siwauth,		/* SIOCSIWAUTH */
 	(iw_handler) ieee80211_ioctl_giwauth,		/* SIOCGIWAUTH */
-	(iw_handler) ieee80211_ioctl_siwencodeext,	/* SIOCSIWENCODEEXT */
+	(iw_handler) cfg80211_wext_siwencodeext,	/* SIOCSIWENCODEEXT */
 	(iw_handler) NULL,				/* SIOCGIWENCODEEXT */
 	(iw_handler) NULL,				/* SIOCSIWPMKSA */
 	(iw_handler) NULL,				/* -- hole -- */
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 0b8ad1f4ecd..116a923b14d 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -23,34 +23,6 @@
  */
 const int ieee802_1d_to_ac[8] = { 2, 3, 3, 2, 1, 1, 0, 0 };
 
-static const char llc_ip_hdr[8] = {0xAA, 0xAA, 0x3, 0, 0, 0, 0x08, 0};
-
-/* Given a data frame determine the 802.1p/1d tag to use.  */
-static unsigned int classify_1d(struct sk_buff *skb)
-{
-	unsigned int dscp;
-
-	/* skb->priority values from 256->263 are magic values to
-	 * directly indicate a specific 802.1d priority.  This is used
-	 * to allow 802.1d priority to be passed directly in from VLAN
-	 * tags, etc.
-	 */
-	if (skb->priority >= 256 && skb->priority <= 263)
-		return skb->priority - 256;
-
-	switch (skb->protocol) {
-	case htons(ETH_P_IP):
-		dscp = ip_hdr(skb)->tos & 0xfc;
-		break;
-
-	default:
-		return 0;
-	}
-
-	return dscp >> 5;
-}
-
-
 static int wme_downgrade_ac(struct sk_buff *skb)
 {
 	switch (skb->priority) {
@@ -94,7 +66,7 @@ static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
 
 	/* use the data classifier to determine what 802.1d tag the
 	 * data frame has */
-	skb->priority = classify_1d(skb);
+	skb->priority = cfg80211_classify8021d(skb);
 
 	/* in case we are a client verify acm is not set for this ac */
 	while (unlikely(local->wmm_acm & BIT(skb->priority))) {
@@ -129,11 +101,11 @@ u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb)
 	 * Now we know the 1d priority, fill in the QoS header if
 	 * there is one (and we haven't done this before).
 	 */
-	if (!skb->requeue && ieee80211_is_data_qos(hdr->frame_control)) {
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
 		u8 *p = ieee80211_get_qos_ctl(hdr);
 		u8 ack_policy = 0;
 		tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
-		if (local->wifi_wme_noack_test)
+		if (unlikely(local->wifi_wme_noack_test))
 			ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK <<
 					QOS_CONTROL_ACK_POLICY_SHIFT;
 		/* qos header is 2 bytes, second reserved */
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 4f8bfea278f..dcfae8884b8 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -122,7 +122,7 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx)
 			return RX_DROP_UNUSABLE;
 
 		mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
-						(void *) skb->data);
+						(void *) skb->data, NULL);
 		return RX_DROP_UNUSABLE;
 	}
 
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index cb3ad741ebf..634d14affc8 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_CONNMARK.ko.  If unsure, say `N'.
+	  ipt_CONNMARK.  If unsure, say `N'.
 
 config NETFILTER_XT_TARGET_CONNSECMARK
 	tristate '"CONNSECMARK" target support'
@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_connmark.ko.  If unsure, say `N'.
+	  ipt_connmark.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNTRACK
 	tristate '"conntrack" connection tracking match support'
@@ -917,6 +917,19 @@ config NETFILTER_XT_MATCH_U32
 
 	  Details and examples are in the kernel module source.
 
+config NETFILTER_XT_MATCH_OSF
+	tristate '"osf" Passive OS fingerprint match'
+	depends on NETFILTER_ADVANCED && NETFILTER_NETLINK
+	help
+	  This option selects the Passive OS Fingerprinting match module
+	  that allows to passively match the remote operating system by
+	  analyzing incoming TCP SYN packets.
+
+	  Rules and loading software can be downloaded from
+	  http://www.ioremap.net/projects/osf
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
 endif # NETFILTER_XTABLES
 
 endmenu
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index 6282060fbda..49f62ee4e9f 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MARK) += xt_mark.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_OSF) += xt_osf.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_OWNER) += xt_owner.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e01061f49cd..7c1333c67ff 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -3345,22 +3345,8 @@ static struct genl_ops ip_vs_genl_ops[] __read_mostly = {
 
 static int __init ip_vs_genl_register(void)
 {
-	int ret, i;
-
-	ret = genl_register_family(&ip_vs_genl_family);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < ARRAY_SIZE(ip_vs_genl_ops); i++) {
-		ret = genl_register_ops(&ip_vs_genl_family, &ip_vs_genl_ops[i]);
-		if (ret)
-			goto err_out;
-	}
-	return 0;
-
-err_out:
-	genl_unregister_family(&ip_vs_genl_family);
-	return ret;
+	return genl_register_family_with_ops(&ip_vs_genl_family,
+		ip_vs_genl_ops, ARRAY_SIZE(ip_vs_genl_ops));
 }
 
 static void ip_vs_genl_unregister(void)
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index 425ab144f15..5874657af7f 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -260,8 +260,8 @@ ip_vs_bypass_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	ip_send_check(ip_hdr(skb));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -324,8 +324,8 @@ ip_vs_bypass_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	}
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -388,8 +388,8 @@ ip_vs_nat_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* mangle the packet */
 	if (pp->dnat_handler && !pp->dnat_handler(skb, pp, cp))
@@ -465,8 +465,8 @@ ip_vs_nat_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* mangle the packet */
 	if (pp->dnat_handler && !pp->dnat_handler(skb, pp, cp))
@@ -553,8 +553,8 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		IP_VS_DBG_RL("ip_vs_tunnel_xmit(): mtu less than 68\n");
 		goto tx_error;
 	}
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	df |= (old_iph->frag_off & htons(IP_DF));
 
@@ -596,8 +596,8 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -665,8 +665,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 		IP_VS_DBG_RL("ip_vs_tunnel_xmit_v6(): mtu less than 1280\n");
 		goto tx_error;
 	}
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	if (mtu < ntohs(old_iph->payload_len) + sizeof(struct ipv6hdr)) {
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
@@ -702,8 +702,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -775,8 +775,8 @@ ip_vs_dr_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	ip_send_check(ip_hdr(skb));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -828,8 +828,8 @@ ip_vs_dr_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	}
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -900,8 +900,8 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop the old route when skb is not shared */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	ip_vs_nat_icmp(skb, pp, cp, 0);
 
@@ -975,8 +975,8 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop the old route when skb is not shared */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	ip_vs_nat_icmp_v6(skb, pp, cp, 0);
 
diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c
index 9fe8982bd7c..4a1d94aac20 100644
--- a/net/netfilter/nf_conntrack_acct.c
+++ b/net/netfilter/nf_conntrack_acct.c
@@ -116,7 +116,7 @@ int nf_conntrack_acct_init(struct net *net)
 	if (net_eq(net, &init_net)) {
 #ifdef CONFIG_NF_CT_ACCT
 	printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use\n");
-		printk(KERN_WARNING "nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or\n");
+		printk(KERN_WARNING "nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or\n");
 		printk(KERN_WARNING "sysctl net.netfilter.nf_conntrack_acct=1 to enable it.\n");
 #endif
 
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 8020db6274b..5f72b94b491 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -39,6 +39,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <net/netfilter/nf_conntrack_extend.h>
 #include <net/netfilter/nf_conntrack_acct.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
 #include <net/netfilter/nf_nat.h>
 #include <net/netfilter/nf_nat_core.h>
 
@@ -182,10 +183,6 @@ destroy_conntrack(struct nf_conntrack *nfct)
 	NF_CT_ASSERT(atomic_read(&nfct->use) == 0);
 	NF_CT_ASSERT(!timer_pending(&ct->timeout));
 
-	if (!test_bit(IPS_DYING_BIT, &ct->status))
-		nf_conntrack_event(IPCT_DESTROY, ct);
-	set_bit(IPS_DYING_BIT, &ct->status);
-
 	/* To make sure we don't get any weird locking issues here:
 	 * destroy_conntrack() MUST NOT be called with a write lock
 	 * to nf_conntrack_lock!!! -HW */
@@ -219,27 +216,70 @@ destroy_conntrack(struct nf_conntrack *nfct)
 	nf_conntrack_free(ct);
 }
 
-static void death_by_timeout(unsigned long ul_conntrack)
+void nf_ct_delete_from_lists(struct nf_conn *ct)
 {
-	struct nf_conn *ct = (void *)ul_conntrack;
 	struct net *net = nf_ct_net(ct);
-	struct nf_conn_help *help = nfct_help(ct);
-	struct nf_conntrack_helper *helper;
-
-	if (help) {
-		rcu_read_lock();
-		helper = rcu_dereference(help->helper);
-		if (helper && helper->destroy)
-			helper->destroy(ct);
-		rcu_read_unlock();
-	}
 
+	nf_ct_helper_destroy(ct);
 	spin_lock_bh(&nf_conntrack_lock);
 	/* Inside lock so preempt is disabled on module removal path.
 	 * Otherwise we can get spurious warnings. */
 	NF_CT_STAT_INC(net, delete_list);
 	clean_from_lists(ct);
 	spin_unlock_bh(&nf_conntrack_lock);
+}
+EXPORT_SYMBOL_GPL(nf_ct_delete_from_lists);
+
+static void death_by_event(unsigned long ul_conntrack)
+{
+	struct nf_conn *ct = (void *)ul_conntrack;
+	struct net *net = nf_ct_net(ct);
+
+	if (nf_conntrack_event(IPCT_DESTROY, ct) < 0) {
+		/* bad luck, let's retry again */
+		ct->timeout.expires = jiffies +
+			(random32() % net->ct.sysctl_events_retry_timeout);
+		add_timer(&ct->timeout);
+		return;
+	}
+	/* we've got the event delivered, now it's dying */
+	set_bit(IPS_DYING_BIT, &ct->status);
+	spin_lock(&nf_conntrack_lock);
+	hlist_nulls_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode);
+	spin_unlock(&nf_conntrack_lock);
+	nf_ct_put(ct);
+}
+
+void nf_ct_insert_dying_list(struct nf_conn *ct)
+{
+	struct net *net = nf_ct_net(ct);
+
+	/* add this conntrack to the dying list */
+	spin_lock_bh(&nf_conntrack_lock);
+	hlist_nulls_add_head(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
+			     &net->ct.dying);
+	spin_unlock_bh(&nf_conntrack_lock);
+	/* set a new timer to retry event delivery */
+	setup_timer(&ct->timeout, death_by_event, (unsigned long)ct);
+	ct->timeout.expires = jiffies +
+		(random32() % net->ct.sysctl_events_retry_timeout);
+	add_timer(&ct->timeout);
+}
+EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list);
+
+static void death_by_timeout(unsigned long ul_conntrack)
+{
+	struct nf_conn *ct = (void *)ul_conntrack;
+
+	if (!test_bit(IPS_DYING_BIT, &ct->status) &&
+	    unlikely(nf_conntrack_event(IPCT_DESTROY, ct) < 0)) {
+		/* destroy event was not delivered */
+		nf_ct_delete_from_lists(ct);
+		nf_ct_insert_dying_list(ct);
+		return;
+	}
+	set_bit(IPS_DYING_BIT, &ct->status);
+	nf_ct_delete_from_lists(ct);
 	nf_ct_put(ct);
 }
 
@@ -398,11 +438,7 @@ __nf_conntrack_confirm(struct sk_buff *skb)
 	help = nfct_help(ct);
 	if (help && help->helper)
 		nf_conntrack_event_cache(IPCT_HELPER, ct);
-#ifdef CONFIG_NF_NAT_NEEDED
-	if (test_bit(IPS_SRC_NAT_DONE_BIT, &ct->status) ||
-	    test_bit(IPS_DST_NAT_DONE_BIT, &ct->status))
-		nf_conntrack_event_cache(IPCT_NATINFO, ct);
-#endif
+
 	nf_conntrack_event_cache(master_ct(ct) ?
 				 IPCT_RELATED : IPCT_NEW, ct);
 	return NF_ACCEPT;
@@ -523,6 +559,7 @@ struct nf_conn *nf_conntrack_alloc(struct net *net,
 		return ERR_PTR(-ENOMEM);
 	}
 
+	spin_lock_init(&ct->lock);
 	atomic_set(&ct->ct_general.use, 1);
 	ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
 	ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
@@ -580,6 +617,7 @@ init_conntrack(struct net *net,
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_ATOMIC);
+	nf_ct_ecache_ext_add(ct, GFP_ATOMIC);
 
 	spin_lock_bh(&nf_conntrack_lock);
 	exp = nf_ct_find_expectation(net, tuple);
@@ -807,13 +845,9 @@ void __nf_ct_refresh_acct(struct nf_conn *ct,
 			  unsigned long extra_jiffies,
 			  int do_acct)
 {
-	int event = 0;
-
 	NF_CT_ASSERT(ct->timeout.data == (unsigned long)ct);
 	NF_CT_ASSERT(skb);
 
-	spin_lock_bh(&nf_conntrack_lock);
-
 	/* Only update if this is not a fixed timeout */
 	if (test_bit(IPS_FIXED_TIMEOUT_BIT, &ct->status))
 		goto acct;
@@ -821,19 +855,14 @@ void __nf_ct_refresh_acct(struct nf_conn *ct,
 	/* If not in hash table, timer will not be active yet */
 	if (!nf_ct_is_confirmed(ct)) {
 		ct->timeout.expires = extra_jiffies;
-		event = IPCT_REFRESH;
 	} else {
 		unsigned long newtime = jiffies + extra_jiffies;
 
 		/* Only update the timeout if the new timeout is at least
 		   HZ jiffies from the old timeout. Need del_timer for race
 		   avoidance (may already be dying). */
-		if (newtime - ct->timeout.expires >= HZ
-		    && del_timer(&ct->timeout)) {
-			ct->timeout.expires = newtime;
-			add_timer(&ct->timeout);
-			event = IPCT_REFRESH;
-		}
+		if (newtime - ct->timeout.expires >= HZ)
+			mod_timer_pending(&ct->timeout, newtime);
 	}
 
 acct:
@@ -842,17 +871,13 @@ acct:
 
 		acct = nf_conn_acct_find(ct);
 		if (acct) {
+			spin_lock_bh(&ct->lock);
 			acct[CTINFO2DIR(ctinfo)].packets++;
 			acct[CTINFO2DIR(ctinfo)].bytes +=
 				skb->len - skb_network_offset(skb);
+			spin_unlock_bh(&ct->lock);
 		}
 	}
-
-	spin_unlock_bh(&nf_conntrack_lock);
-
-	/* must be unlocked when calling event cache */
-	if (event)
-		nf_conntrack_event_cache(event, ct);
 }
 EXPORT_SYMBOL_GPL(__nf_ct_refresh_acct);
 
@@ -864,14 +889,14 @@ bool __nf_ct_kill_acct(struct nf_conn *ct,
 	if (do_acct) {
 		struct nf_conn_counter *acct;
 
-		spin_lock_bh(&nf_conntrack_lock);
 		acct = nf_conn_acct_find(ct);
 		if (acct) {
+			spin_lock_bh(&ct->lock);
 			acct[CTINFO2DIR(ctinfo)].packets++;
 			acct[CTINFO2DIR(ctinfo)].bytes +=
 				skb->len - skb_network_offset(skb);
+			spin_unlock_bh(&ct->lock);
 		}
-		spin_unlock_bh(&nf_conntrack_lock);
 	}
 
 	if (del_timer(&ct->timeout)) {
@@ -1001,15 +1026,22 @@ struct __nf_ct_flush_report {
 	int report;
 };
 
-static int kill_all(struct nf_conn *i, void *data)
+static int kill_report(struct nf_conn *i, void *data)
 {
 	struct __nf_ct_flush_report *fr = (struct __nf_ct_flush_report *)data;
 
-	/* get_next_corpse sets the dying bit for us */
-	nf_conntrack_event_report(IPCT_DESTROY,
-				  i,
-				  fr->pid,
-				  fr->report);
+	/* If we fail to deliver the event, death_by_timeout() will retry */
+	if (nf_conntrack_event_report(IPCT_DESTROY, i,
+				      fr->pid, fr->report) < 0)
+		return 1;
+
+	/* Avoid the delivery of the destroy event in death_by_timeout(). */
+	set_bit(IPS_DYING_BIT, &i->status);
+	return 1;
+}
+
+static int kill_all(struct nf_conn *i, void *data)
+{
 	return 1;
 }
 
@@ -1023,15 +1055,30 @@ void nf_ct_free_hashtable(void *hash, int vmalloced, unsigned int size)
 }
 EXPORT_SYMBOL_GPL(nf_ct_free_hashtable);
 
-void nf_conntrack_flush(struct net *net, u32 pid, int report)
+void nf_conntrack_flush_report(struct net *net, u32 pid, int report)
 {
 	struct __nf_ct_flush_report fr = {
 		.pid 	= pid,
 		.report = report,
 	};
-	nf_ct_iterate_cleanup(net, kill_all, &fr);
+	nf_ct_iterate_cleanup(net, kill_report, &fr);
+}
+EXPORT_SYMBOL_GPL(nf_conntrack_flush_report);
+
+static void nf_ct_release_dying_list(void)
+{
+	struct nf_conntrack_tuple_hash *h;
+	struct nf_conn *ct;
+	struct hlist_nulls_node *n;
+
+	spin_lock_bh(&nf_conntrack_lock);
+	hlist_nulls_for_each_entry(h, n, &init_net.ct.dying, hnnode) {
+		ct = nf_ct_tuplehash_to_ctrack(h);
+		/* never fails to remove them, no listeners at this point */
+		nf_ct_kill(ct);
+	}
+	spin_unlock_bh(&nf_conntrack_lock);
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_flush);
 
 static void nf_conntrack_cleanup_init_net(void)
 {
@@ -1042,10 +1089,9 @@ static void nf_conntrack_cleanup_init_net(void)
 
 static void nf_conntrack_cleanup_net(struct net *net)
 {
-	nf_ct_event_cache_flush(net);
-	nf_conntrack_ecache_fini(net);
  i_see_dead_people:
-	nf_conntrack_flush(net, 0, 0);
+	nf_ct_iterate_cleanup(net, kill_all, NULL);
+	nf_ct_release_dying_list();
 	if (atomic_read(&net->ct.count) != 0) {
 		schedule();
 		goto i_see_dead_people;
@@ -1056,6 +1102,7 @@ static void nf_conntrack_cleanup_net(struct net *net)
 
 	nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
 			     nf_conntrack_htable_size);
+	nf_conntrack_ecache_fini(net);
 	nf_conntrack_acct_fini(net);
 	nf_conntrack_expect_fini(net);
 	free_percpu(net->ct.stat);
@@ -1226,14 +1273,12 @@ static int nf_conntrack_init_net(struct net *net)
 
 	atomic_set(&net->ct.count, 0);
 	INIT_HLIST_NULLS_HEAD(&net->ct.unconfirmed, 0);
+	INIT_HLIST_NULLS_HEAD(&net->ct.dying, 0);
 	net->ct.stat = alloc_percpu(struct ip_conntrack_stat);
 	if (!net->ct.stat) {
 		ret = -ENOMEM;
 		goto err_stat;
 	}
-	ret = nf_conntrack_ecache_init(net);
-	if (ret < 0)
-		goto err_ecache;
 	net->ct.hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size,
 					     &net->ct.hash_vmalloc, 1);
 	if (!net->ct.hash) {
@@ -1247,6 +1292,9 @@ static int nf_conntrack_init_net(struct net *net)
 	ret = nf_conntrack_acct_init(net);
 	if (ret < 0)
 		goto err_acct;
+	ret = nf_conntrack_ecache_init(net);
+	if (ret < 0)
+		goto err_ecache;
 
 	/* Set up fake conntrack:
 	    - to never be deleted, not in any hashes */
@@ -1259,14 +1307,14 @@ static int nf_conntrack_init_net(struct net *net)
 
 	return 0;
 
+err_ecache:
+	nf_conntrack_acct_fini(net);
 err_acct:
 	nf_conntrack_expect_fini(net);
 err_expect:
 	nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
 			     nf_conntrack_htable_size);
 err_hash:
-	nf_conntrack_ecache_fini(net);
-err_ecache:
 	free_percpu(net->ct.stat);
 err_stat:
 	return ret;
diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c
index dee4190209c..aee560b4768 100644
--- a/net/netfilter/nf_conntrack_ecache.c
+++ b/net/netfilter/nf_conntrack_ecache.c
@@ -16,121 +16,245 @@
 #include <linux/stddef.h>
 #include <linux/err.h>
 #include <linux/percpu.h>
-#include <linux/notifier.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 
 #include <net/netfilter/nf_conntrack.h>
 #include <net/netfilter/nf_conntrack_core.h>
+#include <net/netfilter/nf_conntrack_extend.h>
 
-ATOMIC_NOTIFIER_HEAD(nf_conntrack_chain);
-EXPORT_SYMBOL_GPL(nf_conntrack_chain);
+static DEFINE_MUTEX(nf_ct_ecache_mutex);
 
-ATOMIC_NOTIFIER_HEAD(nf_ct_expect_chain);
-EXPORT_SYMBOL_GPL(nf_ct_expect_chain);
+struct nf_ct_event_notifier *nf_conntrack_event_cb __read_mostly;
+EXPORT_SYMBOL_GPL(nf_conntrack_event_cb);
+
+struct nf_exp_event_notifier *nf_expect_event_cb __read_mostly;
+EXPORT_SYMBOL_GPL(nf_expect_event_cb);
 
 /* deliver cached events and clear cache entry - must be called with locally
  * disabled softirqs */
-static inline void
-__nf_ct_deliver_cached_events(struct nf_conntrack_ecache *ecache)
+void nf_ct_deliver_cached_events(struct nf_conn *ct)
 {
-	if (nf_ct_is_confirmed(ecache->ct) && !nf_ct_is_dying(ecache->ct)
-	    && ecache->events) {
+	unsigned long events;
+	struct nf_ct_event_notifier *notify;
+	struct nf_conntrack_ecache *e;
+
+	rcu_read_lock();
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		goto out_unlock;
+
+	events = xchg(&e->cache, 0);
+
+	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct) && events) {
 		struct nf_ct_event item = {
-			.ct 	= ecache->ct,
+			.ct	= ct,
 			.pid	= 0,
 			.report	= 0
 		};
+		int ret;
+		/* We make a copy of the missed event cache without taking
+		 * the lock, thus we may send missed events twice. However,
+		 * this does not harm and it happens very rarely. */
+		unsigned long missed = e->missed;
 
-		atomic_notifier_call_chain(&nf_conntrack_chain,
-					   ecache->events,
-					   &item);
+		ret = notify->fcn(events | missed, &item);
+		if (unlikely(ret < 0 || missed)) {
+			spin_lock_bh(&ct->lock);
+			if (ret < 0)
+				e->missed |= events;
+			else
+				e->missed &= ~missed;
+			spin_unlock_bh(&ct->lock);
+		} 
 	}
 
-	ecache->events = 0;
-	nf_ct_put(ecache->ct);
-	ecache->ct = NULL;
+out_unlock:
+	rcu_read_unlock();
 }
+EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events);
 
-/* Deliver all cached events for a particular conntrack. This is called
- * by code prior to async packet handling for freeing the skb */
-void nf_ct_deliver_cached_events(const struct nf_conn *ct)
+int nf_conntrack_register_notifier(struct nf_ct_event_notifier *new)
 {
-	struct net *net = nf_ct_net(ct);
-	struct nf_conntrack_ecache *ecache;
-
-	local_bh_disable();
-	ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id());
-	if (ecache->ct == ct)
-		__nf_ct_deliver_cached_events(ecache);
-	local_bh_enable();
+	int ret = 0;
+	struct nf_ct_event_notifier *notify;
+
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	if (notify != NULL) {
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	rcu_assign_pointer(nf_conntrack_event_cb, new);
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
+
+out_unlock:
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events);
+EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier);
 
-/* Deliver cached events for old pending events, if current conntrack != old */
-void __nf_ct_event_cache_init(struct nf_conn *ct)
+void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *new)
 {
-	struct net *net = nf_ct_net(ct);
-	struct nf_conntrack_ecache *ecache;
-
-	/* take care of delivering potentially old events */
-	ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id());
-	BUG_ON(ecache->ct == ct);
-	if (ecache->ct)
-		__nf_ct_deliver_cached_events(ecache);
-	/* initialize for this conntrack/packet */
-	ecache->ct = ct;
-	nf_conntrack_get(&ct->ct_general);
+	struct nf_ct_event_notifier *notify;
+
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	BUG_ON(notify != new);
+	rcu_assign_pointer(nf_conntrack_event_cb, NULL);
+	mutex_unlock(&nf_ct_ecache_mutex);
 }
-EXPORT_SYMBOL_GPL(__nf_ct_event_cache_init);
+EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier);
 
-/* flush the event cache - touches other CPU's data and must not be called
- * while packets are still passing through the code */
-void nf_ct_event_cache_flush(struct net *net)
+int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *new)
 {
-	struct nf_conntrack_ecache *ecache;
-	int cpu;
+	int ret = 0;
+	struct nf_exp_event_notifier *notify;
 
-	for_each_possible_cpu(cpu) {
-		ecache = per_cpu_ptr(net->ct.ecache, cpu);
-		if (ecache->ct)
-			nf_ct_put(ecache->ct);
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_expect_event_cb);
+	if (notify != NULL) {
+		ret = -EBUSY;
+		goto out_unlock;
 	}
+	rcu_assign_pointer(nf_expect_event_cb, new);
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
+
+out_unlock:
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
 }
+EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier);
 
-int nf_conntrack_ecache_init(struct net *net)
+void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *new)
 {
-	net->ct.ecache = alloc_percpu(struct nf_conntrack_ecache);
-	if (!net->ct.ecache)
-		return -ENOMEM;
-	return 0;
+	struct nf_exp_event_notifier *notify;
+
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_expect_event_cb);
+	BUG_ON(notify != new);
+	rcu_assign_pointer(nf_expect_event_cb, NULL);
+	mutex_unlock(&nf_ct_ecache_mutex);
 }
+EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier);
 
-void nf_conntrack_ecache_fini(struct net *net)
+#define NF_CT_EVENTS_DEFAULT 1
+static int nf_ct_events __read_mostly = NF_CT_EVENTS_DEFAULT;
+static int nf_ct_events_retry_timeout __read_mostly = 15*HZ;
+
+#ifdef CONFIG_SYSCTL
+static struct ctl_table event_sysctl_table[] = {
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "nf_conntrack_events",
+		.data		= &init_net.ct.sysctl_events,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "nf_conntrack_events_retry_timeout",
+		.data		= &init_net.ct.sysctl_events_retry_timeout,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{}
+};
+#endif /* CONFIG_SYSCTL */
+
+static struct nf_ct_ext_type event_extend __read_mostly = {
+	.len	= sizeof(struct nf_conntrack_ecache),
+	.align	= __alignof__(struct nf_conntrack_ecache),
+	.id	= NF_CT_EXT_ECACHE,
+};
+
+#ifdef CONFIG_SYSCTL
+static int nf_conntrack_event_init_sysctl(struct net *net)
 {
-	free_percpu(net->ct.ecache);
+	struct ctl_table *table;
+
+	table = kmemdup(event_sysctl_table, sizeof(event_sysctl_table),
+			GFP_KERNEL);
+	if (!table)
+		goto out;
+
+	table[0].data = &net->ct.sysctl_events;
+	table[1].data = &net->ct.sysctl_events_retry_timeout;
+
+	net->ct.event_sysctl_header =
+		register_net_sysctl_table(net,
+					  nf_net_netfilter_sysctl_path, table);
+	if (!net->ct.event_sysctl_header) {
+		printk(KERN_ERR "nf_ct_event: can't register to sysctl.\n");
+		goto out_register;
+	}
+	return 0;
+
+out_register:
+	kfree(table);
+out:
+	return -ENOMEM;
 }
 
-int nf_conntrack_register_notifier(struct notifier_block *nb)
+static void nf_conntrack_event_fini_sysctl(struct net *net)
 {
-	return atomic_notifier_chain_register(&nf_conntrack_chain, nb);
+	struct ctl_table *table;
+
+	table = net->ct.event_sysctl_header->ctl_table_arg;
+	unregister_net_sysctl_table(net->ct.event_sysctl_header);
+	kfree(table);
+}
+#else
+static int nf_conntrack_event_init_sysctl(struct net *net)
+{
+	return 0;
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier);
 
-int nf_conntrack_unregister_notifier(struct notifier_block *nb)
+static void nf_conntrack_event_fini_sysctl(struct net *net)
 {
-	return atomic_notifier_chain_unregister(&nf_conntrack_chain, nb);
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier);
+#endif /* CONFIG_SYSCTL */
 
-int nf_ct_expect_register_notifier(struct notifier_block *nb)
+int nf_conntrack_ecache_init(struct net *net)
 {
-	return atomic_notifier_chain_register(&nf_ct_expect_chain, nb);
+	int ret;
+
+	net->ct.sysctl_events = nf_ct_events;
+	net->ct.sysctl_events_retry_timeout = nf_ct_events_retry_timeout;
+
+	if (net_eq(net, &init_net)) {
+		ret = nf_ct_extend_register(&event_extend);
+		if (ret < 0) {
+			printk(KERN_ERR "nf_ct_event: Unable to register "
+					"event extension.\n");
+			goto out_extend_register;
+		}
+	}
+
+	ret = nf_conntrack_event_init_sysctl(net);
+	if (ret < 0)
+		goto out_sysctl;
+
+	return 0;
+
+out_sysctl:
+	if (net_eq(net, &init_net))
+		nf_ct_extend_unregister(&event_extend);
+out_extend_register:
+	return ret;
 }
-EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier);
 
-int nf_ct_expect_unregister_notifier(struct notifier_block *nb)
+void nf_conntrack_ecache_fini(struct net *net)
 {
-	return atomic_notifier_chain_unregister(&nf_ct_expect_chain, nb);
+	nf_conntrack_event_fini_sysctl(net);
+	if (net_eq(net, &init_net))
+		nf_ct_extend_unregister(&event_extend);
 }
-EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier);
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index 00fecc385f9..5509dd1f14c 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -338,11 +338,9 @@ static void update_nl_seq(struct nf_conn *ct, u32 nl_seq,
 
 	if (info->seq_aft_nl_num[dir] < NUM_SEQ_TO_REMEMBER) {
 		info->seq_aft_nl[dir][info->seq_aft_nl_num[dir]++] = nl_seq;
-		nf_conntrack_event_cache(IPCT_HELPINFO_VOLATILE, ct);
 	} else if (oldest != NUM_SEQ_TO_REMEMBER &&
 		   after(nl_seq, info->seq_aft_nl[dir][oldest])) {
 		info->seq_aft_nl[dir][oldest] = nl_seq;
-		nf_conntrack_event_cache(IPCT_HELPINFO_VOLATILE, ct);
 	}
 }
 
diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c
index 0fa5a422959..65c2a7bc3af 100644
--- a/net/netfilter/nf_conntrack_helper.c
+++ b/net/netfilter/nf_conntrack_helper.c
@@ -136,6 +136,20 @@ static inline int unhelp(struct nf_conntrack_tuple_hash *i,
 	return 0;
 }
 
+void nf_ct_helper_destroy(struct nf_conn *ct)
+{
+	struct nf_conn_help *help = nfct_help(ct);
+	struct nf_conntrack_helper *helper;
+
+	if (help) {
+		rcu_read_lock();
+		helper = rcu_dereference(help->helper);
+		if (helper && helper->destroy)
+			helper->destroy(ct);
+		rcu_read_unlock();
+	}
+}
+
 int nf_conntrack_helper_register(struct nf_conntrack_helper *me)
 {
 	unsigned int h = helper_hash(&me->tuple);
diff --git a/net/netfilter/nf_conntrack_netbios_ns.c b/net/netfilter/nf_conntrack_netbios_ns.c
index 8a3875e36ec..497b2224536 100644
--- a/net/netfilter/nf_conntrack_netbios_ns.c
+++ b/net/netfilter/nf_conntrack_netbios_ns.c
@@ -48,7 +48,7 @@ static int help(struct sk_buff *skb, unsigned int protoff,
 {
 	struct nf_conntrack_expect *exp;
 	struct iphdr *iph = ip_hdr(skb);
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct in_device *in_dev;
 	__be32 mask = 0;
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index c523f0b8cee..49479d19457 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -27,7 +27,6 @@
 #include <linux/netlink.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/notifier.h>
 
 #include <linux/netfilter.h>
 #include <net/netlink.h>
@@ -144,7 +143,7 @@ nla_put_failure:
 }
 
 static inline int
-ctnetlink_dump_protoinfo(struct sk_buff *skb, const struct nf_conn *ct)
+ctnetlink_dump_protoinfo(struct sk_buff *skb, struct nf_conn *ct)
 {
 	struct nf_conntrack_l4proto *l4proto;
 	struct nlattr *nest_proto;
@@ -346,23 +345,21 @@ nla_put_failure:
 	return -1;
 }
 
-#define tuple(ct, dir) (&(ct)->tuplehash[dir].tuple)
-
 static int
 ctnetlink_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
-		    int event, int nowait,
-		    const struct nf_conn *ct)
+		    int event, struct nf_conn *ct)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
 	struct nlattr *nest_parms;
-	unsigned char *b = skb_tail_pointer(skb);
+	unsigned int flags = pid ? NLM_F_MULTI : 0;
 
 	event |= NFNL_SUBSYS_CTNETLINK << 8;
-	nlh    = NLMSG_PUT(skb, pid, seq, event, sizeof(struct nfgenmsg));
-	nfmsg  = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = (nowait && pid) ? NLM_F_MULTI : 0;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = nf_ct_l3num(ct);
 	nfmsg->version      = NFNETLINK_V0;
 	nfmsg->res_id	    = 0;
@@ -370,14 +367,14 @@ ctnetlink_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_ORIG | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_REPLY | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_REPLY)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_REPLY)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
@@ -395,132 +392,109 @@ ctnetlink_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	    ctnetlink_dump_nat_seq_adj(skb, ct) < 0)
 		goto nla_put_failure;
 
-	nlh->nlmsg_len = skb_tail_pointer(skb) - b;
+	nlmsg_end(skb, nlh);
 	return skb->len;
 
 nlmsg_failure:
 nla_put_failure:
-	nlmsg_trim(skb, b);
+	nlmsg_cancel(skb, nlh);
 	return -1;
 }
 
 #ifdef CONFIG_NF_CONNTRACK_EVENTS
-/*
- * The general structure of a ctnetlink event is
- *
- *  CTA_TUPLE_ORIG
- *    <l3/l4-proto-attributes>
- *  CTA_TUPLE_REPLY
- *    <l3/l4-proto-attributes>
- *  CTA_ID
- *  ...
- *  CTA_PROTOINFO
- *    <l4-proto-attributes>
- *  CTA_TUPLE_MASTER
- *    <l3/l4-proto-attributes>
- *
- * Therefore the formular is
- *
- *   size = sizeof(headers) + sizeof(generic_nlas) + 3 * sizeof(tuple_nlas)
- *		+ sizeof(protoinfo_nlas)
- */
-static struct sk_buff *
-ctnetlink_alloc_skb(const struct nf_conntrack_tuple *tuple, gfp_t gfp)
+static inline size_t
+ctnetlink_proto_size(const struct nf_conn *ct)
 {
 	struct nf_conntrack_l3proto *l3proto;
 	struct nf_conntrack_l4proto *l4proto;
-	int len;
-
-#define NLA_TYPE_SIZE(type)		nla_total_size(sizeof(type))
-
-	/* proto independant part */
-	len = NLMSG_SPACE(sizeof(struct nfgenmsg))
-		+ 3 * nla_total_size(0)		/* CTA_TUPLE_ORIG|REPL|MASTER */
-		+ 3 * nla_total_size(0)		/* CTA_TUPLE_IP */
-		+ 3 * nla_total_size(0)		/* CTA_TUPLE_PROTO */
-		+ 3 * NLA_TYPE_SIZE(u_int8_t)	/* CTA_PROTO_NUM */
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_ID */
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_STATUS */
+	size_t len = 0;
+
+	rcu_read_lock();
+	l3proto = __nf_ct_l3proto_find(nf_ct_l3num(ct));
+	len += l3proto->nla_size;
+
+	l4proto = __nf_ct_l4proto_find(nf_ct_l3num(ct), nf_ct_protonum(ct));
+	len += l4proto->nla_size;
+	rcu_read_unlock();
+
+	return len;
+}
+
+static inline size_t
+ctnetlink_nlmsg_size(const struct nf_conn *ct)
+{
+	return NLMSG_ALIGN(sizeof(struct nfgenmsg))
+	       + 3 * nla_total_size(0) /* CTA_TUPLE_ORIG|REPL|MASTER */
+	       + 3 * nla_total_size(0) /* CTA_TUPLE_IP */
+	       + 3 * nla_total_size(0) /* CTA_TUPLE_PROTO */
+	       + 3 * nla_total_size(sizeof(u_int8_t)) /* CTA_PROTO_NUM */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_ID */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_STATUS */
 #ifdef CONFIG_NF_CT_ACCT
-		+ 2 * nla_total_size(0)		/* CTA_COUNTERS_ORIG|REPL */
-		+ 2 * NLA_TYPE_SIZE(uint64_t)	/* CTA_COUNTERS_PACKETS */
-		+ 2 * NLA_TYPE_SIZE(uint64_t)	/* CTA_COUNTERS_BYTES */
+	       + 2 * nla_total_size(0) /* CTA_COUNTERS_ORIG|REPL */
+	       + 2 * nla_total_size(sizeof(uint64_t)) /* CTA_COUNTERS_PACKETS */
+	       + 2 * nla_total_size(sizeof(uint64_t)) /* CTA_COUNTERS_BYTES */
 #endif
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_TIMEOUT */
-		+ nla_total_size(0)		/* CTA_PROTOINFO */
-		+ nla_total_size(0)		/* CTA_HELP */
-		+ nla_total_size(NF_CT_HELPER_NAME_LEN)	/* CTA_HELP_NAME */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_TIMEOUT */
+	       + nla_total_size(0) /* CTA_PROTOINFO */
+	       + nla_total_size(0) /* CTA_HELP */
+	       + nla_total_size(NF_CT_HELPER_NAME_LEN) /* CTA_HELP_NAME */
 #ifdef CONFIG_NF_CONNTRACK_SECMARK
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_SECMARK */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_SECMARK */
 #endif
 #ifdef CONFIG_NF_NAT_NEEDED
-		+ 2 * nla_total_size(0)		/* CTA_NAT_SEQ_ADJ_ORIG|REPL */
-		+ 2 * NLA_TYPE_SIZE(u_int32_t)	/* CTA_NAT_SEQ_CORRECTION_POS */
-		+ 2 * NLA_TYPE_SIZE(u_int32_t)	/* CTA_NAT_SEQ_CORRECTION_BEFORE */
-		+ 2 * NLA_TYPE_SIZE(u_int32_t)	/* CTA_NAT_SEQ_CORRECTION_AFTER */
+	       + 2 * nla_total_size(0) /* CTA_NAT_SEQ_ADJ_ORIG|REPL */
+	       + 6 * nla_total_size(sizeof(u_int32_t)) /* CTA_NAT_SEQ_OFFSET */
 #endif
 #ifdef CONFIG_NF_CONNTRACK_MARK
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_MARK */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_MARK */
 #endif
-		;
-
-#undef NLA_TYPE_SIZE
-
-	rcu_read_lock();
-	l3proto = __nf_ct_l3proto_find(tuple->src.l3num);
-	len += l3proto->nla_size;
-
-	l4proto = __nf_ct_l4proto_find(tuple->src.l3num, tuple->dst.protonum);
-	len += l4proto->nla_size;
-	rcu_read_unlock();
-
-	return alloc_skb(len, gfp);
+	       + ctnetlink_proto_size(ct)
+	       ;
 }
 
-static int ctnetlink_conntrack_event(struct notifier_block *this,
-				     unsigned long events, void *ptr)
+static int
+ctnetlink_conntrack_event(unsigned int events, struct nf_ct_event *item)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
 	struct nlattr *nest_parms;
-	struct nf_ct_event *item = (struct nf_ct_event *)ptr;
 	struct nf_conn *ct = item->ct;
 	struct sk_buff *skb;
 	unsigned int type;
-	sk_buff_data_t b;
 	unsigned int flags = 0, group;
+	int err;
 
 	/* ignore our fake conntrack entry */
 	if (ct == &nf_conntrack_untracked)
-		return NOTIFY_DONE;
+		return 0;
 
-	if (events & IPCT_DESTROY) {
+	if (events & (1 << IPCT_DESTROY)) {
 		type = IPCTNL_MSG_CT_DELETE;
 		group = NFNLGRP_CONNTRACK_DESTROY;
-	} else  if (events & (IPCT_NEW | IPCT_RELATED)) {
+	} else  if (events & ((1 << IPCT_NEW) | (1 << IPCT_RELATED))) {
 		type = IPCTNL_MSG_CT_NEW;
 		flags = NLM_F_CREATE|NLM_F_EXCL;
 		group = NFNLGRP_CONNTRACK_NEW;
-	} else  if (events & (IPCT_STATUS | IPCT_PROTOINFO)) {
+	} else  if (events) {
 		type = IPCTNL_MSG_CT_NEW;
 		group = NFNLGRP_CONNTRACK_UPDATE;
 	} else
-		return NOTIFY_DONE;
+		return 0;
 
 	if (!item->report && !nfnetlink_has_listeners(group))
-		return NOTIFY_DONE;
+		return 0;
 
-	skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC);
-	if (!skb)
+	skb = nlmsg_new(ctnetlink_nlmsg_size(ct), GFP_ATOMIC);
+	if (skb == NULL)
 		goto errout;
 
-	b = skb->tail;
-
 	type |= NFNL_SUBSYS_CTNETLINK << 8;
-	nlh   = NLMSG_PUT(skb, item->pid, 0, type, sizeof(struct nfgenmsg));
-	nfmsg = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, item->pid, 0, type, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = flags;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = nf_ct_l3num(ct);
 	nfmsg->version	= NFNETLINK_V0;
 	nfmsg->res_id	= 0;
@@ -529,14 +503,14 @@ static int ctnetlink_conntrack_event(struct notifier_block *this,
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_ORIG | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_REPLY | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_REPLY)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_REPLY)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
@@ -546,7 +520,7 @@ static int ctnetlink_conntrack_event(struct notifier_block *this,
 	if (ctnetlink_dump_status(skb, ct) < 0)
 		goto nla_put_failure;
 
-	if (events & IPCT_DESTROY) {
+	if (events & (1 << IPCT_DESTROY)) {
 		if (ctnetlink_dump_counters(skb, ct, IP_CT_DIR_ORIGINAL) < 0 ||
 		    ctnetlink_dump_counters(skb, ct, IP_CT_DIR_REPLY) < 0)
 			goto nla_put_failure;
@@ -554,47 +528,51 @@ static int ctnetlink_conntrack_event(struct notifier_block *this,
 		if (ctnetlink_dump_timeout(skb, ct) < 0)
 			goto nla_put_failure;
 
-		if (events & IPCT_PROTOINFO
+		if (events & (1 << IPCT_PROTOINFO)
 		    && ctnetlink_dump_protoinfo(skb, ct) < 0)
 			goto nla_put_failure;
 
-		if ((events & IPCT_HELPER || nfct_help(ct))
+		if ((events & (1 << IPCT_HELPER) || nfct_help(ct))
 		    && ctnetlink_dump_helpinfo(skb, ct) < 0)
 			goto nla_put_failure;
 
 #ifdef CONFIG_NF_CONNTRACK_SECMARK
-		if ((events & IPCT_SECMARK || ct->secmark)
+		if ((events & (1 << IPCT_SECMARK) || ct->secmark)
 		    && ctnetlink_dump_secmark(skb, ct) < 0)
 			goto nla_put_failure;
 #endif
 
-		if (events & IPCT_RELATED &&
+		if (events & (1 << IPCT_RELATED) &&
 		    ctnetlink_dump_master(skb, ct) < 0)
 			goto nla_put_failure;
 
-		if (events & IPCT_NATSEQADJ &&
+		if (events & (1 << IPCT_NATSEQADJ) &&
 		    ctnetlink_dump_nat_seq_adj(skb, ct) < 0)
 			goto nla_put_failure;
 	}
 
 #ifdef CONFIG_NF_CONNTRACK_MARK
-	if ((events & IPCT_MARK || ct->mark)
+	if ((events & (1 << IPCT_MARK) || ct->mark)
 	    && ctnetlink_dump_mark(skb, ct) < 0)
 		goto nla_put_failure;
 #endif
 	rcu_read_unlock();
 
-	nlh->nlmsg_len = skb->tail - b;
-	nfnetlink_send(skb, item->pid, group, item->report);
-	return NOTIFY_DONE;
+	nlmsg_end(skb, nlh);
+	err = nfnetlink_send(skb, item->pid, group, item->report, GFP_ATOMIC);
+	if (err == -ENOBUFS || err == -EAGAIN)
+		return -ENOBUFS;
+
+	return 0;
 
 nla_put_failure:
 	rcu_read_unlock();
+	nlmsg_cancel(skb, nlh);
 nlmsg_failure:
 	kfree_skb(skb);
 errout:
 	nfnetlink_set_err(0, group, -ENOBUFS);
-	return NOTIFY_DONE;
+	return 0;
 }
 #endif /* CONFIG_NF_CONNTRACK_EVENTS */
 
@@ -611,7 +589,7 @@ ctnetlink_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
 	struct nf_conn *ct, *last;
 	struct nf_conntrack_tuple_hash *h;
 	struct hlist_nulls_node *n;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(cb->nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(cb->nlh);
 	u_int8_t l3proto = nfmsg->nfgen_family;
 
 	rcu_read_lock();
@@ -637,8 +615,7 @@ restart:
 			}
 			if (ctnetlink_fill_info(skb, NETLINK_CB(cb->skb).pid,
 						cb->nlh->nlmsg_seq,
-						IPCTNL_MSG_CT_NEW,
-						1, ct) < 0) {
+						IPCTNL_MSG_CT_NEW, ct) < 0) {
 				cb->args[1] = (unsigned long)ct;
 				goto out;
 			}
@@ -792,7 +769,7 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple_hash *h;
 	struct nf_conntrack_tuple tuple;
 	struct nf_conn *ct;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -802,9 +779,9 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_REPLY, u3);
 	else {
 		/* Flush the whole table */
-		nf_conntrack_flush(&init_net, 
-				   NETLINK_CB(skb).pid, 
-				   nlmsg_report(nlh));
+		nf_conntrack_flush_report(&init_net,
+					 NETLINK_CB(skb).pid,
+					 nlmsg_report(nlh));
 		return 0;
 	}
 
@@ -825,10 +802,15 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		}
 	}
 
-	nf_conntrack_event_report(IPCT_DESTROY,
-				  ct,
-				  NETLINK_CB(skb).pid,
-				  nlmsg_report(nlh));
+	if (nf_conntrack_event_report(IPCT_DESTROY, ct,
+				      NETLINK_CB(skb).pid,
+				      nlmsg_report(nlh)) < 0) {
+		nf_ct_delete_from_lists(ct);
+		/* we failed to report the event, try later */
+		nf_ct_insert_dying_list(ct);
+		nf_ct_put(ct);
+		return 0;
+	}
 
 	/* death_by_timeout would report the event again */
 	set_bit(IPS_DYING_BIT, &ct->status);
@@ -847,7 +829,7 @@ ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple tuple;
 	struct nf_conn *ct;
 	struct sk_buff *skb2 = NULL;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -872,15 +854,15 @@ ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	ct = nf_ct_tuplehash_to_ctrack(h);
 
 	err = -ENOMEM;
-	skb2 = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-	if (!skb2) {
+	skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (skb2 == NULL) {
 		nf_ct_put(ct);
 		return -ENOMEM;
 	}
 
 	rcu_read_lock();
 	err = ctnetlink_fill_info(skb2, NETLINK_CB(skb).pid, nlh->nlmsg_seq,
-				  IPCTNL_MSG_CT_NEW, 1, ct);
+				  IPCTNL_MSG_CT_NEW, ct);
 	rcu_read_unlock();
 	nf_ct_put(ct);
 	if (err <= 0)
@@ -1280,6 +1262,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_ATOMIC);
+	nf_ct_ecache_ext_add(ct, GFP_ATOMIC);
 
 #if defined(CONFIG_NF_CONNTRACK_MARK)
 	if (cda[CTA_MARK])
@@ -1325,7 +1308,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 {
 	struct nf_conntrack_tuple otuple, rtuple;
 	struct nf_conntrack_tuple_hash *h = NULL;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -1367,13 +1350,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 			else
 				events = IPCT_NEW;
 
-			nf_conntrack_event_report(IPCT_STATUS |
-						  IPCT_HELPER |
-						  IPCT_PROTOINFO |
-						  IPCT_NATSEQADJ |
-						  IPCT_MARK | events,
-						  ct, NETLINK_CB(skb).pid,
-						  nlmsg_report(nlh));
+			nf_conntrack_eventmask_report((1 << IPCT_STATUS) |
+						      (1 << IPCT_HELPER) |
+						      (1 << IPCT_PROTOINFO) |
+						      (1 << IPCT_NATSEQADJ) |
+						      (1 << IPCT_MARK) | events,
+						      ct, NETLINK_CB(skb).pid,
+						      nlmsg_report(nlh));
 			nf_ct_put(ct);
 		} else
 			spin_unlock_bh(&nf_conntrack_lock);
@@ -1392,13 +1375,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		if (err == 0) {
 			nf_conntrack_get(&ct->ct_general);
 			spin_unlock_bh(&nf_conntrack_lock);
-			nf_conntrack_event_report(IPCT_STATUS |
-						  IPCT_HELPER |
-						  IPCT_PROTOINFO |
-						  IPCT_NATSEQADJ |
-						  IPCT_MARK,
-						  ct, NETLINK_CB(skb).pid,
-						  nlmsg_report(nlh));
+			nf_conntrack_eventmask_report((1 << IPCT_STATUS) |
+						      (1 << IPCT_HELPER) |
+						      (1 << IPCT_PROTOINFO) |
+						      (1 << IPCT_NATSEQADJ) |
+						      (1 << IPCT_MARK),
+						      ct, NETLINK_CB(skb).pid,
+						      nlmsg_report(nlh));
 			nf_ct_put(ct);
 		} else
 			spin_unlock_bh(&nf_conntrack_lock);
@@ -1503,19 +1486,18 @@ nla_put_failure:
 
 static int
 ctnetlink_exp_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
-		    int event,
-		    int nowait,
-		    const struct nf_conntrack_expect *exp)
+			int event, const struct nf_conntrack_expect *exp)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
-	unsigned char *b = skb_tail_pointer(skb);
+	unsigned int flags = pid ? NLM_F_MULTI : 0;
 
 	event |= NFNL_SUBSYS_CTNETLINK_EXP << 8;
-	nlh    = NLMSG_PUT(skb, pid, seq, event, sizeof(struct nfgenmsg));
-	nfmsg  = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = (nowait && pid) ? NLM_F_MULTI : 0;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = exp->tuple.src.l3num;
 	nfmsg->version	    = NFNETLINK_V0;
 	nfmsg->res_id	    = 0;
@@ -1523,49 +1505,46 @@ ctnetlink_exp_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	if (ctnetlink_exp_dump_expect(skb, exp) < 0)
 		goto nla_put_failure;
 
-	nlh->nlmsg_len = skb_tail_pointer(skb) - b;
+	nlmsg_end(skb, nlh);
 	return skb->len;
 
 nlmsg_failure:
 nla_put_failure:
-	nlmsg_trim(skb, b);
+	nlmsg_cancel(skb, nlh);
 	return -1;
 }
 
 #ifdef CONFIG_NF_CONNTRACK_EVENTS
-static int ctnetlink_expect_event(struct notifier_block *this,
-				  unsigned long events, void *ptr)
+static int
+ctnetlink_expect_event(unsigned int events, struct nf_exp_event *item)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
-	struct nf_exp_event *item = (struct nf_exp_event *)ptr;
 	struct nf_conntrack_expect *exp = item->exp;
 	struct sk_buff *skb;
 	unsigned int type;
-	sk_buff_data_t b;
 	int flags = 0;
 
-	if (events & IPEXP_NEW) {
+	if (events & (1 << IPEXP_NEW)) {
 		type = IPCTNL_MSG_EXP_NEW;
 		flags = NLM_F_CREATE|NLM_F_EXCL;
 	} else
-		return NOTIFY_DONE;
+		return 0;
 
 	if (!item->report &&
 	    !nfnetlink_has_listeners(NFNLGRP_CONNTRACK_EXP_NEW))
-		return NOTIFY_DONE;
+		return 0;
 
-	skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
-	if (!skb)
+	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (skb == NULL)
 		goto errout;
 
-	b = skb->tail;
-
 	type |= NFNL_SUBSYS_CTNETLINK_EXP << 8;
-	nlh   = NLMSG_PUT(skb, item->pid, 0, type, sizeof(struct nfgenmsg));
-	nfmsg = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, item->pid, 0, type, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = flags;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = exp->tuple.src.l3num;
 	nfmsg->version	    = NFNETLINK_V0;
 	nfmsg->res_id	    = 0;
@@ -1575,17 +1554,19 @@ static int ctnetlink_expect_event(struct notifier_block *this,
 		goto nla_put_failure;
 	rcu_read_unlock();
 
-	nlh->nlmsg_len = skb->tail - b;
-	nfnetlink_send(skb, item->pid, NFNLGRP_CONNTRACK_EXP_NEW, item->report);
-	return NOTIFY_DONE;
+	nlmsg_end(skb, nlh);
+	nfnetlink_send(skb, item->pid, NFNLGRP_CONNTRACK_EXP_NEW,
+		       item->report, GFP_ATOMIC);
+	return 0;
 
 nla_put_failure:
 	rcu_read_unlock();
+	nlmsg_cancel(skb, nlh);
 nlmsg_failure:
 	kfree_skb(skb);
 errout:
 	nfnetlink_set_err(0, 0, -ENOBUFS);
-	return NOTIFY_DONE;
+	return 0;
 }
 #endif
 static int ctnetlink_exp_done(struct netlink_callback *cb)
@@ -1600,7 +1581,7 @@ ctnetlink_exp_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = &init_net;
 	struct nf_conntrack_expect *exp, *last;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(cb->nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(cb->nlh);
 	struct hlist_node *n;
 	u_int8_t l3proto = nfmsg->nfgen_family;
 
@@ -1617,10 +1598,11 @@ restart:
 					continue;
 				cb->args[1] = 0;
 			}
-			if (ctnetlink_exp_fill_info(skb, NETLINK_CB(cb->skb).pid,
+			if (ctnetlink_exp_fill_info(skb,
+						    NETLINK_CB(cb->skb).pid,
 						    cb->nlh->nlmsg_seq,
 						    IPCTNL_MSG_EXP_NEW,
-						    1, exp) < 0) {
+						    exp) < 0) {
 				if (!atomic_inc_not_zero(&exp->use))
 					continue;
 				cb->args[1] = (unsigned long)exp;
@@ -1652,7 +1634,7 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple tuple;
 	struct nf_conntrack_expect *exp;
 	struct sk_buff *skb2;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -1683,14 +1665,13 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
 	}
 
 	err = -ENOMEM;
-	skb2 = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-	if (!skb2)
+	skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (skb2 == NULL)
 		goto out;
 
 	rcu_read_lock();
 	err = ctnetlink_exp_fill_info(skb2, NETLINK_CB(skb).pid,
-				      nlh->nlmsg_seq, IPCTNL_MSG_EXP_NEW,
-				      1, exp);
+				      nlh->nlmsg_seq, IPCTNL_MSG_EXP_NEW, exp);
 	rcu_read_unlock();
 	if (err <= 0)
 		goto free;
@@ -1713,7 +1694,7 @@ ctnetlink_del_expect(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_expect *exp;
 	struct nf_conntrack_tuple tuple;
 	struct nf_conntrack_helper *h;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	struct hlist_node *n, *next;
 	u_int8_t u3 = nfmsg->nfgen_family;
 	unsigned int i;
@@ -1854,7 +1835,7 @@ ctnetlink_new_expect(struct sock *ctnl, struct sk_buff *skb,
 {
 	struct nf_conntrack_tuple tuple;
 	struct nf_conntrack_expect *exp;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -1891,12 +1872,12 @@ ctnetlink_new_expect(struct sock *ctnl, struct sk_buff *skb,
 }
 
 #ifdef CONFIG_NF_CONNTRACK_EVENTS
-static struct notifier_block ctnl_notifier = {
-	.notifier_call	= ctnetlink_conntrack_event,
+static struct nf_ct_event_notifier ctnl_notifier = {
+	.fcn = ctnetlink_conntrack_event,
 };
 
-static struct notifier_block ctnl_notifier_exp = {
-	.notifier_call	= ctnetlink_expect_event,
+static struct nf_exp_event_notifier ctnl_notifier_exp = {
+	.fcn = ctnetlink_expect_event,
 };
 #endif
 
diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c
index aee0d6bea30..1b816a2ea81 100644
--- a/net/netfilter/nf_conntrack_proto_dccp.c
+++ b/net/netfilter/nf_conntrack_proto_dccp.c
@@ -25,8 +25,6 @@
 #include <net/netfilter/nf_conntrack_ecache.h>
 #include <net/netfilter/nf_log.h>
 
-static DEFINE_RWLOCK(dccp_lock);
-
 /* Timeouts are based on values from RFC4340:
  *
  * - REQUEST:
@@ -492,7 +490,7 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 		return NF_ACCEPT;
 	}
 
-	write_lock_bh(&dccp_lock);
+	spin_lock_bh(&ct->lock);
 
 	role = ct->proto.dccp.role[dir];
 	old_state = ct->proto.dccp.state;
@@ -536,13 +534,13 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 		ct->proto.dccp.last_dir = dir;
 		ct->proto.dccp.last_pkt = type;
 
-		write_unlock_bh(&dccp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_DCCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				      "nf_ct_dccp: invalid packet ignored ");
 		return NF_ACCEPT;
 	case CT_DCCP_INVALID:
-		write_unlock_bh(&dccp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_DCCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				      "nf_ct_dccp: invalid state transition ");
@@ -552,7 +550,7 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 	ct->proto.dccp.last_dir = dir;
 	ct->proto.dccp.last_pkt = type;
 	ct->proto.dccp.state = new_state;
-	write_unlock_bh(&dccp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	if (new_state != old_state)
 		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
@@ -621,36 +619,39 @@ static int dccp_print_tuple(struct seq_file *s,
 			  ntohs(tuple->dst.u.dccp.port));
 }
 
-static int dccp_print_conntrack(struct seq_file *s, const struct nf_conn *ct)
+static int dccp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	return seq_printf(s, "%s ", dccp_state_names[ct->proto.dccp.state]);
 }
 
 #if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
 static int dccp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
-			  const struct nf_conn *ct)
+			  struct nf_conn *ct)
 {
 	struct nlattr *nest_parms;
 
-	read_lock_bh(&dccp_lock);
+	spin_lock_bh(&ct->lock);
 	nest_parms = nla_nest_start(skb, CTA_PROTOINFO_DCCP | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
 	NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_STATE, ct->proto.dccp.state);
 	NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_ROLE,
 		   ct->proto.dccp.role[IP_CT_DIR_ORIGINAL]);
+	NLA_PUT_BE64(skb, CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ,
+		     cpu_to_be64(ct->proto.dccp.handshake_seq));
 	nla_nest_end(skb, nest_parms);
-	read_unlock_bh(&dccp_lock);
+	spin_unlock_bh(&ct->lock);
 	return 0;
 
 nla_put_failure:
-	read_unlock_bh(&dccp_lock);
+	spin_unlock_bh(&ct->lock);
 	return -1;
 }
 
 static const struct nla_policy dccp_nla_policy[CTA_PROTOINFO_DCCP_MAX + 1] = {
 	[CTA_PROTOINFO_DCCP_STATE]	= { .type = NLA_U8 },
 	[CTA_PROTOINFO_DCCP_ROLE]	= { .type = NLA_U8 },
+	[CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ] = { .type = NLA_U64 },
 };
 
 static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
@@ -674,7 +675,7 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
 		return -EINVAL;
 	}
 
-	write_lock_bh(&dccp_lock);
+	spin_lock_bh(&ct->lock);
 	ct->proto.dccp.state = nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]);
 	if (nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) == CT_DCCP_ROLE_CLIENT) {
 		ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_CLIENT;
@@ -683,7 +684,11 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
 		ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_SERVER;
 		ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_CLIENT;
 	}
-	write_unlock_bh(&dccp_lock);
+	if (tb[CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ]) {
+		ct->proto.dccp.handshake_seq =
+		be64_to_cpu(nla_get_be64(tb[CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ]));
+	}
+	spin_unlock_bh(&ct->lock);
 	return 0;
 }
 
diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index 117b80112fc..a54a0af0edb 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -176,7 +176,7 @@ static bool gre_invert_tuple(struct nf_conntrack_tuple *tuple,
 static bool gre_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff,
 			     struct nf_conntrack_tuple *tuple)
 {
-	struct net *net = dev_net(skb->dev ? skb->dev : skb->dst->dev);
+	struct net *net = dev_net(skb->dev ? skb->dev : skb_dst(skb)->dev);
 	const struct gre_hdr_pptp *pgrehdr;
 	struct gre_hdr_pptp _pgrehdr;
 	__be16 srckey;
@@ -219,8 +219,7 @@ static int gre_print_tuple(struct seq_file *s,
 }
 
 /* print private data for conntrack */
-static int gre_print_conntrack(struct seq_file *s,
-			       const struct nf_conn *ct)
+static int gre_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	return seq_printf(s, "timeout=%u, stream_timeout=%u ",
 			  (ct->proto.gre.timeout / HZ),
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 101b4ad9e81..c10e6f36e31 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -25,9 +25,6 @@
 #include <net/netfilter/nf_conntrack_l4proto.h>
 #include <net/netfilter/nf_conntrack_ecache.h>
 
-/* Protects ct->proto.sctp */
-static DEFINE_RWLOCK(sctp_lock);
-
 /* FIXME: Examine ipfilter's timeouts and conntrack transitions more
    closely.  They're more complex. --RR
 
@@ -164,13 +161,13 @@ static int sctp_print_tuple(struct seq_file *s,
 }
 
 /* Print out the private part of the conntrack. */
-static int sctp_print_conntrack(struct seq_file *s, const struct nf_conn *ct)
+static int sctp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	enum sctp_conntrack state;
 
-	read_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	state = ct->proto.sctp.state;
-	read_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return seq_printf(s, "%s ", sctp_conntrack_names[state]);
 }
@@ -318,7 +315,7 @@ static int sctp_packet(struct nf_conn *ct,
 	}
 
 	old_state = new_state = SCTP_CONNTRACK_NONE;
-	write_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
 		/* Special cases of Verification tag check (Sec 8.5.1) */
 		if (sch->type == SCTP_CID_INIT) {
@@ -371,7 +368,7 @@ static int sctp_packet(struct nf_conn *ct,
 		if (old_state != new_state)
 			nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
 	}
-	write_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	nf_ct_refresh_acct(ct, ctinfo, skb, sctp_timeouts[new_state]);
 
@@ -386,7 +383,7 @@ static int sctp_packet(struct nf_conn *ct,
 	return NF_ACCEPT;
 
 out_unlock:
-	write_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 out:
 	return -NF_ACCEPT;
 }
@@ -469,11 +466,11 @@ static bool sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
 #include <linux/netfilter/nfnetlink_conntrack.h>
 
 static int sctp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
-			  const struct nf_conn *ct)
+			  struct nf_conn *ct)
 {
 	struct nlattr *nest_parms;
 
-	read_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	nest_parms = nla_nest_start(skb, CTA_PROTOINFO_SCTP | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
@@ -488,14 +485,14 @@ static int sctp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
 		     CTA_PROTOINFO_SCTP_VTAG_REPLY,
 		     ct->proto.sctp.vtag[IP_CT_DIR_REPLY]);
 
-	read_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	nla_nest_end(skb, nest_parms);
 
 	return 0;
 
 nla_put_failure:
-	read_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 	return -1;
 }
 
@@ -527,13 +524,13 @@ static int nlattr_to_sctp(struct nlattr *cda[], struct nf_conn *ct)
 	    !tb[CTA_PROTOINFO_SCTP_VTAG_REPLY])
 		return -EINVAL;
 
-	write_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	ct->proto.sctp.state = nla_get_u8(tb[CTA_PROTOINFO_SCTP_STATE]);
 	ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] =
 		nla_get_be32(tb[CTA_PROTOINFO_SCTP_VTAG_ORIGINAL]);
 	ct->proto.sctp.vtag[IP_CT_DIR_REPLY] =
 		nla_get_be32(tb[CTA_PROTOINFO_SCTP_VTAG_REPLY]);
-	write_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return 0;
 }
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 97a6e93d742..33fc0a443f3 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -29,9 +29,6 @@
 #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
 #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
 
-/* Protects ct->proto.tcp */
-static DEFINE_RWLOCK(tcp_lock);
-
 /* "Be conservative in what you do,
     be liberal in what you accept from others."
     If it's non-zero, we mark only out of window RST segments as INVALID. */
@@ -59,7 +56,7 @@ static const char *const tcp_conntrack_names[] = {
 	"LAST_ACK",
 	"TIME_WAIT",
 	"CLOSE",
-	"LISTEN"
+	"SYN_SENT2",
 };
 
 #define SECS * HZ
@@ -82,6 +79,7 @@ static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
 	[TCP_CONNTRACK_LAST_ACK]	= 30 SECS,
 	[TCP_CONNTRACK_TIME_WAIT]	= 2 MINS,
 	[TCP_CONNTRACK_CLOSE]		= 10 SECS,
+	[TCP_CONNTRACK_SYN_SENT2]	= 2 MINS,
 };
 
 #define sNO TCP_CONNTRACK_NONE
@@ -93,7 +91,7 @@ static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
 #define sLA TCP_CONNTRACK_LAST_ACK
 #define sTW TCP_CONNTRACK_TIME_WAIT
 #define sCL TCP_CONNTRACK_CLOSE
-#define sLI TCP_CONNTRACK_LISTEN
+#define sS2 TCP_CONNTRACK_SYN_SENT2
 #define sIV TCP_CONNTRACK_MAX
 #define sIG TCP_CONNTRACK_IGNORE
 
@@ -123,6 +121,7 @@ enum tcp_bit_set {
  *
  * NONE:	initial state
  * SYN_SENT:	SYN-only packet seen
+ * SYN_SENT2:	SYN-only packet seen from reply dir, simultaneous open
  * SYN_RECV:	SYN-ACK packet seen
  * ESTABLISHED:	ACK packet seen
  * FIN_WAIT:	FIN packet seen
@@ -131,26 +130,24 @@ enum tcp_bit_set {
  * TIME_WAIT:	last ACK seen
  * CLOSE:	closed connection (RST)
  *
- * LISTEN state is not used.
- *
  * Packets marked as IGNORED (sIG):
  *	if they may be either invalid or valid
  *	and the receiver may send back a connection
  *	closing RST or a SYN/ACK.
  *
  * Packets marked as INVALID (sIV):
- *	if they are invalid
- *	or we do not support the request (simultaneous open)
+ *	if we regard them as truly invalid packets
  */
 static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
 	{
 /* ORIGINAL */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*syn*/	   { sSS, sSS, sIG, sIG, sIG, sIG, sIG, sSS, sSS, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*syn*/	   { sSS, sSS, sIG, sIG, sIG, sIG, sIG, sSS, sSS, sS2 },
 /*
  *	sNO -> sSS	Initialize a new connection
  *	sSS -> sSS	Retransmitted SYN
- *	sSR -> sIG	Late retransmitted SYN?
+ *	sS2 -> sS2	Late retransmitted SYN
+ *	sSR -> sIG
  *	sES -> sIG	Error: SYNs in window outside the SYN_SENT state
  *			are errors. Receiver will reply with RST
  *			and close the connection.
@@ -161,22 +158,30 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sSS	Reopened connection (RFC 1122).
  *	sCL -> sSS
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*synack*/ { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*synack*/ { sIV, sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
 /*
- * A SYN/ACK from the client is always invalid:
- *	- either it tries to set up a simultaneous open, which is
- *	  not supported;
- *	- or the firewall has just been inserted between the two hosts
- *	  during the session set-up. The SYN will be retransmitted
- *	  by the true client (or it'll time out).
+ *	sNO -> sIV	Too late and no reason to do anything
+ *	sSS -> sIV	Client can't send SYN and then SYN/ACK
+ *	sS2 -> sSR	SYN/ACK sent to SYN2 in simultaneous open
+ *	sSR -> sIG
+ *	sES -> sIG	Error: SYNs in window outside the SYN_SENT state
+ *			are errors. Receiver will reply with RST
+ *			and close the connection.
+ *			Or we are not in sync and hold a dead connection.
+ *	sFW -> sIG
+ *	sCW -> sIG
+ *	sLA -> sIG
+ *	sTW -> sIG
+ *	sCL -> sIG
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
 /*fin*/    { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
 /*
  *	sNO -> sIV	Too late and no reason to do anything...
  *	sSS -> sIV	Client migth not send FIN in this state:
  *			we enforce waiting for a SYN/ACK reply first.
+ *	sS2 -> sIV
  *	sSR -> sFW	Close started.
  *	sES -> sFW
  *	sFW -> sLA	FIN seen in both directions, waiting for
@@ -187,11 +192,12 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
 /*ack*/	   { sES, sIV, sES, sES, sCW, sCW, sTW, sTW, sCL, sIV },
 /*
  *	sNO -> sES	Assumed.
  *	sSS -> sIV	ACK is invalid: we haven't seen a SYN/ACK yet.
+ *	sS2 -> sIV
  *	sSR -> sES	Established state is reached.
  *	sES -> sES	:-)
  *	sFW -> sCW	Normal close request answered by ACK.
@@ -200,29 +206,31 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW	Retransmitted last ACK. Remain in the same state.
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL },
 /*none*/   { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV }
 	},
 	{
 /* REPLY */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*syn*/	   { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*syn*/	   { sIV, sS2, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sS2 },
 /*
  *	sNO -> sIV	Never reached.
- *	sSS -> sIV	Simultaneous open, not supported
- *	sSR -> sIV	Simultaneous open, not supported.
- *	sES -> sIV	Server may not initiate a connection.
+ *	sSS -> sS2	Simultaneous open
+ *	sS2 -> sS2	Retransmitted simultaneous SYN
+ *	sSR -> sIV	Invalid SYN packets sent by the server
+ *	sES -> sIV
  *	sFW -> sIV
  *	sCW -> sIV
  *	sLA -> sIV
  *	sTW -> sIV	Reopened connection, but server may not do it.
  *	sCL -> sIV
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*synack*/ { sIV, sSR, sSR, sIG, sIG, sIG, sIG, sIG, sIG, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*synack*/ { sIV, sSR, sSR, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
 /*
  *	sSS -> sSR	Standard open.
+ *	sS2 -> sSR	Simultaneous open
  *	sSR -> sSR	Retransmitted SYN/ACK.
  *	sES -> sIG	Late retransmitted SYN/ACK?
  *	sFW -> sIG	Might be SYN/ACK answering ignored SYN
@@ -231,10 +239,11 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sIG
  *	sCL -> sIG
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
 /*fin*/    { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
 /*
  *	sSS -> sIV	Server might not send FIN in this state.
+ *	sS2 -> sIV
  *	sSR -> sFW	Close started.
  *	sES -> sFW
  *	sFW -> sLA	FIN seen in both directions.
@@ -243,10 +252,11 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*ack*/	   { sIV, sIG, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*ack*/	   { sIV, sIG, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIG },
 /*
  *	sSS -> sIG	Might be a half-open connection.
+ *	sS2 -> sIG
  *	sSR -> sSR	Might answer late resent SYN.
  *	sES -> sES	:-)
  *	sFW -> sCW	Normal close request answered by ACK.
@@ -255,8 +265,8 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW	Retransmitted last ACK.
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL },
 /*none*/   { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV }
 	}
 };
@@ -296,13 +306,13 @@ static int tcp_print_tuple(struct seq_file *s,
 }
 
 /* Print out the private part of the conntrack. */
-static int tcp_print_conntrack(struct seq_file *s, const struct nf_conn *ct)
+static int tcp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	enum tcp_conntrack state;
 
-	read_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	state = ct->proto.tcp.state;
-	read_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return seq_printf(s, "%s ", tcp_conntrack_names[state]);
 }
@@ -521,13 +531,14 @@ static bool tcp_in_window(const struct nf_conn *ct,
 		 receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
 		 receiver->td_scale);
 
-	if (sender->td_end == 0) {
+	if (sender->td_maxwin == 0) {
 		/*
 		 * Initialize sender data.
 		 */
-		if (tcph->syn && tcph->ack) {
+		if (tcph->syn) {
 			/*
-			 * Outgoing SYN-ACK in reply to a SYN.
+			 * SYN-ACK in reply to a SYN
+			 * or SYN from reply direction in simultaneous open.
 			 */
 			sender->td_end =
 			sender->td_maxend = end;
@@ -543,6 +554,9 @@ static bool tcp_in_window(const struct nf_conn *ct,
 			      && receiver->flags & IP_CT_TCP_FLAG_WINDOW_SCALE))
 				sender->td_scale =
 				receiver->td_scale = 0;
+			if (!tcph->ack)
+				/* Simultaneous open */
+				return true;
 		} else {
 			/*
 			 * We are in the middle of a connection,
@@ -716,14 +730,14 @@ void nf_conntrack_tcp_update(const struct sk_buff *skb,
 
 	end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph);
 
-	write_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	/*
 	 * We have to worry for the ack in the reply packet only...
 	 */
 	if (after(end, ct->proto.tcp.seen[dir].td_end))
 		ct->proto.tcp.seen[dir].td_end = end;
 	ct->proto.tcp.last_end = end;
-	write_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 	pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i "
 		 "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
 		 sender->td_end, sender->td_maxend, sender->td_maxwin,
@@ -832,7 +846,7 @@ static int tcp_packet(struct nf_conn *ct,
 	th = skb_header_pointer(skb, dataoff, sizeof(_tcph), &_tcph);
 	BUG_ON(th == NULL);
 
-	write_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	old_state = ct->proto.tcp.state;
 	dir = CTINFO2DIR(ctinfo);
 	index = get_conntrack_index(th);
@@ -862,7 +876,7 @@ static int tcp_packet(struct nf_conn *ct,
 		        && ct->proto.tcp.last_index == TCP_RST_SET)) {
 			/* Attempt to reopen a closed/aborted connection.
 			 * Delete this connection and look up again. */
-			write_unlock_bh(&tcp_lock);
+			spin_unlock_bh(&ct->lock);
 
 			/* Only repeat if we can actually remove the timer.
 			 * Destruction may already be in progress in process
@@ -898,7 +912,7 @@ static int tcp_packet(struct nf_conn *ct,
 			 * that the client cannot but retransmit its SYN and
 			 * thus initiate a clean new session.
 			 */
-			write_unlock_bh(&tcp_lock);
+			spin_unlock_bh(&ct->lock);
 			if (LOG_INVALID(net, IPPROTO_TCP))
 				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 					  "nf_ct_tcp: killing out of sync session ");
@@ -911,7 +925,7 @@ static int tcp_packet(struct nf_conn *ct,
 		ct->proto.tcp.last_end =
 		    segment_seq_plus_len(ntohl(th->seq), skb->len, dataoff, th);
 
-		write_unlock_bh(&tcp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_TCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				  "nf_ct_tcp: invalid packet ignored ");
@@ -920,7 +934,7 @@ static int tcp_packet(struct nf_conn *ct,
 		/* Invalid packet */
 		pr_debug("nf_ct_tcp: Invalid dir=%i index=%u ostate=%u\n",
 			 dir, get_conntrack_index(th), old_state);
-		write_unlock_bh(&tcp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_TCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				  "nf_ct_tcp: invalid state ");
@@ -930,7 +944,7 @@ static int tcp_packet(struct nf_conn *ct,
 		    && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
 		    && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
 			/* Invalid RST  */
-			write_unlock_bh(&tcp_lock);
+			spin_unlock_bh(&ct->lock);
 			if (LOG_INVALID(net, IPPROTO_TCP))
 				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 					  "nf_ct_tcp: invalid RST ");
@@ -961,7 +975,7 @@ static int tcp_packet(struct nf_conn *ct,
 
 	if (!tcp_in_window(ct, &ct->proto.tcp, dir, index,
 			   skb, dataoff, th, pf)) {
-		write_unlock_bh(&tcp_lock);
+		spin_unlock_bh(&ct->lock);
 		return -NF_ACCEPT;
 	}
      in_window:
@@ -990,9 +1004,8 @@ static int tcp_packet(struct nf_conn *ct,
 		timeout = nf_ct_tcp_timeout_unacknowledged;
 	else
 		timeout = tcp_timeouts[new_state];
-	write_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
-	nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, ct);
 	if (new_state != old_state)
 		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
 
@@ -1086,7 +1099,7 @@ static bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb,
 
 	ct->proto.tcp.seen[1].td_end = 0;
 	ct->proto.tcp.seen[1].td_maxend = 0;
-	ct->proto.tcp.seen[1].td_maxwin = 1;
+	ct->proto.tcp.seen[1].td_maxwin = 0;
 	ct->proto.tcp.seen[1].td_scale = 0;
 
 	/* tcp_packet will set them */
@@ -1108,12 +1121,12 @@ static bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb,
 #include <linux/netfilter/nfnetlink_conntrack.h>
 
 static int tcp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
-			 const struct nf_conn *ct)
+			 struct nf_conn *ct)
 {
 	struct nlattr *nest_parms;
 	struct nf_ct_tcp_flags tmp = {};
 
-	read_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	nest_parms = nla_nest_start(skb, CTA_PROTOINFO_TCP | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
@@ -1133,14 +1146,14 @@ static int tcp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
 	tmp.flags = ct->proto.tcp.seen[1].flags;
 	NLA_PUT(skb, CTA_PROTOINFO_TCP_FLAGS_REPLY,
 		sizeof(struct nf_ct_tcp_flags), &tmp);
-	read_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	nla_nest_end(skb, nest_parms);
 
 	return 0;
 
 nla_put_failure:
-	read_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 	return -1;
 }
 
@@ -1171,7 +1184,7 @@ static int nlattr_to_tcp(struct nlattr *cda[], struct nf_conn *ct)
 	    nla_get_u8(tb[CTA_PROTOINFO_TCP_STATE]) >= TCP_CONNTRACK_MAX)
 		return -EINVAL;
 
-	write_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	if (tb[CTA_PROTOINFO_TCP_STATE])
 		ct->proto.tcp.state = nla_get_u8(tb[CTA_PROTOINFO_TCP_STATE]);
 
@@ -1198,7 +1211,7 @@ static int nlattr_to_tcp(struct nlattr *cda[], struct nf_conn *ct)
 		ct->proto.tcp.seen[1].td_scale =
 			nla_get_u8(tb[CTA_PROTOINFO_TCP_WSCALE_REPLY]);
 	}
-	write_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return 0;
 }
@@ -1328,6 +1341,13 @@ static struct ctl_table tcp_compat_sysctl_table[] = {
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
+		.procname	= "ip_conntrack_tcp_timeout_syn_sent2",
+		.data		= &tcp_timeouts[TCP_CONNTRACK_SYN_SENT2],
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{
 		.procname	= "ip_conntrack_tcp_timeout_syn_recv",
 		.data		= &tcp_timeouts[TCP_CONNTRACK_SYN_RECV],
 		.maxlen		= sizeof(unsigned int),
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index beb37311e1a..2fefe147750 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -248,14 +248,14 @@ static int nf_log_proc_dostring(ctl_table *table, int write, struct file *filp,
 		rcu_assign_pointer(nf_loggers[tindex], logger);
 		mutex_unlock(&nf_log_mutex);
 	} else {
-		rcu_read_lock();
-		logger = rcu_dereference(nf_loggers[tindex]);
+		mutex_lock(&nf_log_mutex);
+		logger = nf_loggers[tindex];
 		if (!logger)
 			table->data = "NONE";
 		else
 			table->data = logger->name;
 		r = proc_dostring(table, write, filp, buffer, lenp, ppos);
-		rcu_read_unlock();
+		mutex_unlock(&nf_log_mutex);
 	}
 
 	return r;
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index 4f2310c93e0..3a6fd77f776 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -204,10 +204,10 @@ int nf_queue(struct sk_buff *skb,
 				  queuenum);
 
 	switch (pf) {
-	case AF_INET:
+	case NFPROTO_IPV4:
 		skb->protocol = htons(ETH_P_IP);
 		break;
-	case AF_INET6:
+	case NFPROTO_IPV6:
 		skb->protocol = htons(ETH_P_IPV6);
 		break;
 	}
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index b8ab37ad7ed..92761a98837 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -107,9 +107,10 @@ int nfnetlink_has_listeners(unsigned int group)
 }
 EXPORT_SYMBOL_GPL(nfnetlink_has_listeners);
 
-int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, int echo)
+int nfnetlink_send(struct sk_buff *skb, u32 pid,
+		   unsigned group, int echo, gfp_t flags)
 {
-	return nlmsg_notify(nfnl, skb, pid, group, echo, gfp_any());
+	return nlmsg_notify(nfnl, skb, pid, group, echo, flags);
 }
 EXPORT_SYMBOL_GPL(nfnetlink_send);
 
@@ -136,7 +137,7 @@ static int nfnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 		return -EPERM;
 
 	/* All the messages must at least contain nfgenmsg */
-	if (nlh->nlmsg_len < NLMSG_SPACE(sizeof(struct nfgenmsg)))
+	if (nlh->nlmsg_len < NLMSG_LENGTH(sizeof(struct nfgenmsg)))
 		return 0;
 
 	type = nlh->nlmsg_type;
@@ -160,19 +161,14 @@ replay:
 	{
 		int min_len = NLMSG_SPACE(sizeof(struct nfgenmsg));
 		u_int8_t cb_id = NFNL_MSG_TYPE(nlh->nlmsg_type);
-		u_int16_t attr_count = ss->cb[cb_id].attr_count;
-		struct nlattr *cda[attr_count+1];
-
-		if (likely(nlh->nlmsg_len >= min_len)) {
-			struct nlattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
-			int attrlen = nlh->nlmsg_len - NLMSG_ALIGN(min_len);
-
-			err = nla_parse(cda, attr_count, attr, attrlen,
-					ss->cb[cb_id].policy);
-			if (err < 0)
-				return err;
-		} else
-			return -EINVAL;
+		struct nlattr *cda[ss->cb[cb_id].attr_count + 1];
+		struct nlattr *attr = (void *)nlh + min_len;
+		int attrlen = nlh->nlmsg_len - min_len;
+
+		err = nla_parse(cda, ss->cb[cb_id].attr_count,
+				attr, attrlen, ss->cb[cb_id].policy);
+		if (err < 0)
+			return err;
 
 		err = nc->call(nfnl, skb, nlh, cda);
 		if (err == -EAGAIN)
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 8c860112ce0..71daa0934b6 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -1,6 +1,6 @@
 /*
  * This is a module which is used for queueing packets and communicating with
- * userspace via nfetlink.
+ * userspace via nfnetlink.
  *
  * (C) 2005 by Harald Welte <laforge@netfilter.org>
  * (C) 2007 by Patrick McHardy <kaber@trash.net>
@@ -932,6 +932,8 @@ static void __exit nfnetlink_queue_fini(void)
 #endif
 	nfnetlink_subsys_unregister(&nfqnl_subsys);
 	netlink_unregister_notifier(&nfqnl_rtnl_notifier);
+
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 MODULE_DESCRIPTION("netfilter packet queue handler");
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 150e5cf62f8..025d1a0af78 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -329,6 +329,32 @@ int xt_find_revision(u8 af, const char *name, u8 revision, int target,
 }
 EXPORT_SYMBOL_GPL(xt_find_revision);
 
+static char *textify_hooks(char *buf, size_t size, unsigned int mask)
+{
+	static const char *const names[] = {
+		"PREROUTING", "INPUT", "FORWARD",
+		"OUTPUT", "POSTROUTING", "BROUTING",
+	};
+	unsigned int i;
+	char *p = buf;
+	bool np = false;
+	int res;
+
+	*p = '\0';
+	for (i = 0; i < ARRAY_SIZE(names); ++i) {
+		if (!(mask & (1 << i)))
+			continue;
+		res = snprintf(p, size, "%s%s", np ? "/" : "", names[i]);
+		if (res > 0) {
+			size -= res;
+			p += res;
+		}
+		np = true;
+	}
+
+	return buf;
+}
+
 int xt_check_match(struct xt_mtchk_param *par,
 		   unsigned int size, u_int8_t proto, bool inv_proto)
 {
@@ -338,26 +364,30 @@ int xt_check_match(struct xt_mtchk_param *par,
 		 * ebt_among is exempt from centralized matchsize checking
 		 * because it uses a dynamic-size data set.
 		 */
-		printk("%s_tables: %s match: invalid size %Zu != %u\n",
+		pr_err("%s_tables: %s match: invalid size %Zu != %u\n",
 		       xt_prefix[par->family], par->match->name,
 		       XT_ALIGN(par->match->matchsize), size);
 		return -EINVAL;
 	}
 	if (par->match->table != NULL &&
 	    strcmp(par->match->table, par->table) != 0) {
-		printk("%s_tables: %s match: only valid in %s table, not %s\n",
+		pr_err("%s_tables: %s match: only valid in %s table, not %s\n",
 		       xt_prefix[par->family], par->match->name,
 		       par->match->table, par->table);
 		return -EINVAL;
 	}
 	if (par->match->hooks && (par->hook_mask & ~par->match->hooks) != 0) {
-		printk("%s_tables: %s match: bad hook_mask %#x/%#x\n",
+		char used[64], allow[64];
+
+		pr_err("%s_tables: %s match: used from hooks %s, but only "
+		       "valid from %s\n",
 		       xt_prefix[par->family], par->match->name,
-		       par->hook_mask, par->match->hooks);
+		       textify_hooks(used, sizeof(used), par->hook_mask),
+		       textify_hooks(allow, sizeof(allow), par->match->hooks));
 		return -EINVAL;
 	}
 	if (par->match->proto && (par->match->proto != proto || inv_proto)) {
-		printk("%s_tables: %s match: only valid for protocol %u\n",
+		pr_err("%s_tables: %s match: only valid for protocol %u\n",
 		       xt_prefix[par->family], par->match->name,
 		       par->match->proto);
 		return -EINVAL;
@@ -484,26 +514,30 @@ int xt_check_target(struct xt_tgchk_param *par,
 		    unsigned int size, u_int8_t proto, bool inv_proto)
 {
 	if (XT_ALIGN(par->target->targetsize) != size) {
-		printk("%s_tables: %s target: invalid size %Zu != %u\n",
+		pr_err("%s_tables: %s target: invalid size %Zu != %u\n",
 		       xt_prefix[par->family], par->target->name,
 		       XT_ALIGN(par->target->targetsize), size);
 		return -EINVAL;
 	}
 	if (par->target->table != NULL &&
 	    strcmp(par->target->table, par->table) != 0) {
-		printk("%s_tables: %s target: only valid in %s table, not %s\n",
+		pr_err("%s_tables: %s target: only valid in %s table, not %s\n",
 		       xt_prefix[par->family], par->target->name,
 		       par->target->table, par->table);
 		return -EINVAL;
 	}
 	if (par->target->hooks && (par->hook_mask & ~par->target->hooks) != 0) {
-		printk("%s_tables: %s target: bad hook_mask %#x/%#x\n",
+		char used[64], allow[64];
+
+		pr_err("%s_tables: %s target: used from hooks %s, but only "
+		       "usable from %s\n",
 		       xt_prefix[par->family], par->target->name,
-		       par->hook_mask, par->target->hooks);
+		       textify_hooks(used, sizeof(used), par->hook_mask),
+		       textify_hooks(allow, sizeof(allow), par->target->hooks));
 		return -EINVAL;
 	}
 	if (par->target->proto && (par->target->proto != proto || inv_proto)) {
-		printk("%s_tables: %s target: only valid for protocol %u\n",
+		pr_err("%s_tables: %s target: only valid for protocol %u\n",
 		       xt_prefix[par->family], par->target->name,
 		       par->target->proto);
 		return -EINVAL;
diff --git a/net/netfilter/xt_NFQUEUE.c b/net/netfilter/xt_NFQUEUE.c
index f9977b3311f..498b45101df 100644
--- a/net/netfilter/xt_NFQUEUE.c
+++ b/net/netfilter/xt_NFQUEUE.c
@@ -11,6 +11,10 @@
 #include <linux/module.h>
 #include <linux/skbuff.h>
 
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/jhash.h>
+
 #include <linux/netfilter.h>
 #include <linux/netfilter_arp.h>
 #include <linux/netfilter/x_tables.h>
@@ -23,6 +27,8 @@ MODULE_ALIAS("ipt_NFQUEUE");
 MODULE_ALIAS("ip6t_NFQUEUE");
 MODULE_ALIAS("arpt_NFQUEUE");
 
+static u32 jhash_initval __read_mostly;
+
 static unsigned int
 nfqueue_tg(struct sk_buff *skb, const struct xt_target_param *par)
 {
@@ -31,32 +37,105 @@ nfqueue_tg(struct sk_buff *skb, const struct xt_target_param *par)
 	return NF_QUEUE_NR(tinfo->queuenum);
 }
 
+static u32 hash_v4(const struct sk_buff *skb)
+{
+	const struct iphdr *iph = ip_hdr(skb);
+	u32 ipaddr;
+
+	/* packets in either direction go into same queue */
+	ipaddr = iph->saddr ^ iph->daddr;
+
+	return jhash_2words(ipaddr, iph->protocol, jhash_initval);
+}
+
+static unsigned int
+nfqueue_tg4_v1(struct sk_buff *skb, const struct xt_target_param *par)
+{
+	const struct xt_NFQ_info_v1 *info = par->targinfo;
+	u32 queue = info->queuenum;
+
+	if (info->queues_total > 1)
+		queue = hash_v4(skb) % info->queues_total + queue;
+	return NF_QUEUE_NR(queue);
+}
+
+#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
+static u32 hash_v6(const struct sk_buff *skb)
+{
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	u32 addr[4];
+
+	addr[0] = ip6h->saddr.s6_addr32[0] ^ ip6h->daddr.s6_addr32[0];
+	addr[1] = ip6h->saddr.s6_addr32[1] ^ ip6h->daddr.s6_addr32[1];
+	addr[2] = ip6h->saddr.s6_addr32[2] ^ ip6h->daddr.s6_addr32[2];
+	addr[3] = ip6h->saddr.s6_addr32[3] ^ ip6h->daddr.s6_addr32[3];
+
+	return jhash2(addr, ARRAY_SIZE(addr), jhash_initval);
+}
+
+static unsigned int
+nfqueue_tg6_v1(struct sk_buff *skb, const struct xt_target_param *par)
+{
+	const struct xt_NFQ_info_v1 *info = par->targinfo;
+	u32 queue = info->queuenum;
+
+	if (info->queues_total > 1)
+		queue = hash_v6(skb) % info->queues_total + queue;
+	return NF_QUEUE_NR(queue);
+}
+#endif
+
+static bool nfqueue_tg_v1_check(const struct xt_tgchk_param *par)
+{
+	const struct xt_NFQ_info_v1 *info = par->targinfo;
+	u32 maxid;
+
+	if (info->queues_total == 0) {
+		pr_err("NFQUEUE: number of total queues is 0\n");
+		return false;
+	}
+	maxid = info->queues_total - 1 + info->queuenum;
+	if (maxid > 0xffff) {
+		pr_err("NFQUEUE: number of queues (%u) out of range (got %u)\n",
+		       info->queues_total, maxid);
+		return false;
+	}
+	return true;
+}
+
 static struct xt_target nfqueue_tg_reg[] __read_mostly = {
 	{
 		.name		= "NFQUEUE",
-		.family		= NFPROTO_IPV4,
+		.family		= NFPROTO_UNSPEC,
 		.target		= nfqueue_tg,
 		.targetsize	= sizeof(struct xt_NFQ_info),
 		.me		= THIS_MODULE,
 	},
 	{
 		.name		= "NFQUEUE",
-		.family		= NFPROTO_IPV6,
-		.target		= nfqueue_tg,
-		.targetsize	= sizeof(struct xt_NFQ_info),
+		.revision	= 1,
+		.family		= NFPROTO_IPV4,
+		.checkentry	= nfqueue_tg_v1_check,
+		.target		= nfqueue_tg4_v1,
+		.targetsize	= sizeof(struct xt_NFQ_info_v1),
 		.me		= THIS_MODULE,
 	},
+#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
 	{
 		.name		= "NFQUEUE",
-		.family		= NFPROTO_ARP,
-		.target		= nfqueue_tg,
-		.targetsize	= sizeof(struct xt_NFQ_info),
+		.revision	= 1,
+		.family		= NFPROTO_IPV6,
+		.checkentry	= nfqueue_tg_v1_check,
+		.target		= nfqueue_tg6_v1,
+		.targetsize	= sizeof(struct xt_NFQ_info_v1),
 		.me		= THIS_MODULE,
 	},
+#endif
 };
 
 static int __init nfqueue_tg_init(void)
 {
+	get_random_bytes(&jhash_initval, sizeof(jhash_initval));
 	return xt_register_targets(nfqueue_tg_reg, ARRAY_SIZE(nfqueue_tg_reg));
 }
 
diff --git a/net/netfilter/xt_TCPMSS.c b/net/netfilter/xt_TCPMSS.c
index 4f3b1f80879..eda64c1cb1e 100644
--- a/net/netfilter/xt_TCPMSS.c
+++ b/net/netfilter/xt_TCPMSS.c
@@ -73,11 +73,11 @@ tcpmss_mangle_packet(struct sk_buff *skb,
 	}
 
 	if (info->mss == XT_TCPMSS_CLAMP_PMTU) {
-		if (dst_mtu(skb->dst) <= minlen) {
+		if (dst_mtu(skb_dst(skb)) <= minlen) {
 			if (net_ratelimit())
 				printk(KERN_ERR "xt_TCPMSS: "
 				       "unknown or invalid path-MTU (%u)\n",
-				       dst_mtu(skb->dst));
+				       dst_mtu(skb_dst(skb)));
 			return -1;
 		}
 		if (in_mtu <= minlen) {
@@ -86,7 +86,7 @@ tcpmss_mangle_packet(struct sk_buff *skb,
 				       "invalid path-MTU (%u)\n", in_mtu);
 			return -1;
 		}
-		newmss = min(dst_mtu(skb->dst), in_mtu) - minlen;
+		newmss = min(dst_mtu(skb_dst(skb)), in_mtu) - minlen;
 	} else
 		newmss = info->mss;
 
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
new file mode 100644
index 00000000000..863e40977a4
--- /dev/null
+++ b/net/netfilter/xt_osf.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright (c) 2003+ Evgeniy Polyakov <zbr@ioremap.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <linux/if.h>
+#include <linux/inetdevice.h>
+#include <linux/ip.h>
+#include <linux/list.h>
+#include <linux/rculist.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+
+#include <net/ip.h>
+#include <net/tcp.h>
+
+#include <linux/netfilter/nfnetlink.h>
+#include <linux/netfilter/x_tables.h>
+#include <net/netfilter/nf_log.h>
+#include <linux/netfilter/xt_osf.h>
+
+struct xt_osf_finger {
+	struct rcu_head			rcu_head;
+	struct list_head		finger_entry;
+	struct xt_osf_user_finger	finger;
+};
+
+enum osf_fmatch_states {
+	/* Packet does not match the fingerprint */
+	FMATCH_WRONG = 0,
+	/* Packet matches the fingerprint */
+	FMATCH_OK,
+	/* Options do not match the fingerprint, but header does */
+	FMATCH_OPT_WRONG,
+};
+
+/*
+ * Indexed by dont-fragment bit.
+ * It is the only constant value in the fingerprint.
+ */
+static struct list_head xt_osf_fingers[2];
+
+static const struct nla_policy xt_osf_policy[OSF_ATTR_MAX + 1] = {
+	[OSF_ATTR_FINGER]	= { .len = sizeof(struct xt_osf_user_finger) },
+};
+
+static void xt_osf_finger_free_rcu(struct rcu_head *rcu_head)
+{
+	struct xt_osf_finger *f = container_of(rcu_head, struct xt_osf_finger, rcu_head);
+
+	kfree(f);
+}
+
+static int xt_osf_add_callback(struct sock *ctnl, struct sk_buff *skb,
+			struct nlmsghdr *nlh, struct nlattr *osf_attrs[])
+{
+	struct xt_osf_user_finger *f;
+	struct xt_osf_finger *kf = NULL, *sf;
+	int err = 0;
+
+	if (!osf_attrs[OSF_ATTR_FINGER])
+		return -EINVAL;
+
+	if (!(nlh->nlmsg_flags & NLM_F_CREATE))
+		return -EINVAL;
+
+	f = nla_data(osf_attrs[OSF_ATTR_FINGER]);
+
+	kf = kmalloc(sizeof(struct xt_osf_finger), GFP_KERNEL);
+	if (!kf)
+		return -ENOMEM;
+
+	memcpy(&kf->finger, f, sizeof(struct xt_osf_user_finger));
+
+	list_for_each_entry(sf, &xt_osf_fingers[!!f->df], finger_entry) {
+		if (memcmp(&sf->finger, f, sizeof(struct xt_osf_user_finger)))
+			continue;
+
+		kfree(kf);
+		kf = NULL;
+
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			err = -EEXIST;
+		break;
+	}
+
+	/*
+	 * We are protected by nfnl mutex.
+	 */
+	if (kf)
+		list_add_tail_rcu(&kf->finger_entry, &xt_osf_fingers[!!f->df]);
+
+	return err;
+}
+
+static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb,
+			struct nlmsghdr *nlh, struct nlattr *osf_attrs[])
+{
+	struct xt_osf_user_finger *f;
+	struct xt_osf_finger *sf;
+	int err = ENOENT;
+
+	if (!osf_attrs[OSF_ATTR_FINGER])
+		return -EINVAL;
+
+	f = nla_data(osf_attrs[OSF_ATTR_FINGER]);
+
+	list_for_each_entry(sf, &xt_osf_fingers[!!f->df], finger_entry) {
+		if (memcmp(&sf->finger, f, sizeof(struct xt_osf_user_finger)))
+			continue;
+
+		/*
+		 * We are protected by nfnl mutex.
+		 */
+		list_del_rcu(&sf->finger_entry);
+		call_rcu(&sf->rcu_head, xt_osf_finger_free_rcu);
+
+		err = 0;
+		break;
+	}
+
+	return err;
+}
+
+static const struct nfnl_callback xt_osf_nfnetlink_callbacks[OSF_MSG_MAX] = {
+	[OSF_MSG_ADD]	= {
+		.call		= xt_osf_add_callback,
+		.attr_count	= OSF_ATTR_MAX,
+		.policy		= xt_osf_policy,
+	},
+	[OSF_MSG_REMOVE]	= {
+		.call		= xt_osf_remove_callback,
+		.attr_count	= OSF_ATTR_MAX,
+		.policy		= xt_osf_policy,
+	},
+};
+
+static const struct nfnetlink_subsystem xt_osf_nfnetlink = {
+	.name			= "osf",
+	.subsys_id		= NFNL_SUBSYS_OSF,
+	.cb_count		= OSF_MSG_MAX,
+	.cb			= xt_osf_nfnetlink_callbacks,
+};
+
+static inline int xt_osf_ttl(const struct sk_buff *skb, const struct xt_osf_info *info,
+			    unsigned char f_ttl)
+{
+	const struct iphdr *ip = ip_hdr(skb);
+
+	if (info->flags & XT_OSF_TTL) {
+		if (info->ttl == XT_OSF_TTL_TRUE)
+			return ip->ttl == f_ttl;
+		if (info->ttl == XT_OSF_TTL_NOCHECK)
+			return 1;
+		else if (ip->ttl <= f_ttl)
+			return 1;
+		else {
+			struct in_device *in_dev = __in_dev_get_rcu(skb->dev);
+			int ret = 0;
+
+			for_ifa(in_dev) {
+				if (inet_ifa_match(ip->saddr, ifa)) {
+					ret = (ip->ttl == f_ttl);
+					break;
+				}
+			}
+			endfor_ifa(in_dev);
+
+			return ret;
+		}
+	}
+
+	return ip->ttl == f_ttl;
+}
+
+static bool xt_osf_match_packet(const struct sk_buff *skb,
+		const struct xt_match_param *p)
+{
+	const struct xt_osf_info *info = p->matchinfo;
+	const struct iphdr *ip = ip_hdr(skb);
+	const struct tcphdr *tcp;
+	struct tcphdr _tcph;
+	int fmatch = FMATCH_WRONG, fcount = 0;
+	unsigned int optsize = 0, check_WSS = 0;
+	u16 window, totlen, mss = 0;
+	bool df;
+	const unsigned char *optp = NULL, *_optp = NULL;
+	unsigned char opts[MAX_IPOPTLEN];
+	const struct xt_osf_finger *kf;
+	const struct xt_osf_user_finger *f;
+
+	if (!info)
+		return false;
+
+	tcp = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(struct tcphdr), &_tcph);
+	if (!tcp)
+		return false;
+
+	if (!tcp->syn)
+		return false;
+
+	totlen = ntohs(ip->tot_len);
+	df = ntohs(ip->frag_off) & IP_DF;
+	window = ntohs(tcp->window);
+
+	if (tcp->doff * 4 > sizeof(struct tcphdr)) {
+		optsize = tcp->doff * 4 - sizeof(struct tcphdr);
+
+		_optp = optp = skb_header_pointer(skb, ip_hdrlen(skb) +
+				sizeof(struct tcphdr), optsize, opts);
+	}
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(kf, &xt_osf_fingers[df], finger_entry) {
+		f = &kf->finger;
+
+		if (!(info->flags & XT_OSF_LOG) && strcmp(info->genre, f->genre))
+			continue;
+
+		optp = _optp;
+		fmatch = FMATCH_WRONG;
+
+		if (totlen == f->ss && xt_osf_ttl(skb, info, f->ttl)) {
+			int foptsize, optnum;
+
+			/*
+			 * Should not happen if userspace parser was written correctly.
+			 */
+			if (f->wss.wc >= OSF_WSS_MAX)
+				continue;
+
+			/* Check options */
+
+			foptsize = 0;
+			for (optnum = 0; optnum < f->opt_num; ++optnum)
+				foptsize += f->opt[optnum].length;
+
+			if (foptsize > MAX_IPOPTLEN ||
+				optsize > MAX_IPOPTLEN ||
+				optsize != foptsize)
+				continue;
+
+			check_WSS = f->wss.wc;
+
+			for (optnum = 0; optnum < f->opt_num; ++optnum) {
+				if (f->opt[optnum].kind == (*optp)) {
+					__u32 len = f->opt[optnum].length;
+					const __u8 *optend = optp + len;
+					int loop_cont = 0;
+
+					fmatch = FMATCH_OK;
+
+					switch (*optp) {
+					case OSFOPT_MSS:
+						mss = optp[3];
+						mss <<= 8;
+						mss |= optp[2];
+
+						mss = ntohs(mss);
+						break;
+					case OSFOPT_TS:
+						loop_cont = 1;
+						break;
+					}
+
+					optp = optend;
+				} else
+					fmatch = FMATCH_OPT_WRONG;
+
+				if (fmatch != FMATCH_OK)
+					break;
+			}
+
+			if (fmatch != FMATCH_OPT_WRONG) {
+				fmatch = FMATCH_WRONG;
+
+				switch (check_WSS) {
+				case OSF_WSS_PLAIN:
+					if (f->wss.val == 0 || window == f->wss.val)
+						fmatch = FMATCH_OK;
+					break;
+				case OSF_WSS_MSS:
+					/*
+					 * Some smart modems decrease mangle MSS to 
+					 * SMART_MSS_2, so we check standard, decreased
+					 * and the one provided in the fingerprint MSS
+					 * values.
+					 */
+#define SMART_MSS_1	1460
+#define SMART_MSS_2	1448
+					if (window == f->wss.val * mss ||
+					    window == f->wss.val * SMART_MSS_1 ||
+					    window == f->wss.val * SMART_MSS_2)
+						fmatch = FMATCH_OK;
+					break;
+				case OSF_WSS_MTU:
+					if (window == f->wss.val * (mss + 40) ||
+					    window == f->wss.val * (SMART_MSS_1 + 40) ||
+					    window == f->wss.val * (SMART_MSS_2 + 40))
+						fmatch = FMATCH_OK;
+					break;
+				case OSF_WSS_MODULO:
+					if ((window % f->wss.val) == 0)
+						fmatch = FMATCH_OK;
+					break;
+				}
+			}
+
+			if (fmatch != FMATCH_OK)
+				continue;
+
+			fcount++;
+
+			if (info->flags & XT_OSF_LOG)
+				nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+					"%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n",
+					f->genre, f->version, f->subtype,
+					&ip->saddr, ntohs(tcp->source),
+					&ip->daddr, ntohs(tcp->dest),
+					f->ttl - ip->ttl);
+
+			if ((info->flags & XT_OSF_LOG) &&
+			    info->loglevel == XT_OSF_LOGLEVEL_FIRST)
+				break;
+		}
+	}
+	rcu_read_unlock();
+
+	if (!fcount && (info->flags & XT_OSF_LOG))
+		nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+			"Remote OS is not known: %pi4:%u -> %pi4:%u\n",
+				&ip->saddr, ntohs(tcp->source),
+				&ip->daddr, ntohs(tcp->dest));
+
+	if (fcount)
+		fmatch = FMATCH_OK;
+
+	return fmatch == FMATCH_OK;
+}
+
+static struct xt_match xt_osf_match = {
+	.name 		= "osf",
+	.revision	= 0,
+	.family		= NFPROTO_IPV4,
+	.proto		= IPPROTO_TCP,
+	.hooks      	= (1 << NF_INET_LOCAL_IN) |
+				(1 << NF_INET_PRE_ROUTING) |
+				(1 << NF_INET_FORWARD),
+	.match 		= xt_osf_match_packet,
+	.matchsize	= sizeof(struct xt_osf_info),
+	.me		= THIS_MODULE,
+};
+
+static int __init xt_osf_init(void)
+{
+	int err = -EINVAL;
+	int i;
+
+	for (i=0; i<ARRAY_SIZE(xt_osf_fingers); ++i)
+		INIT_LIST_HEAD(&xt_osf_fingers[i]);
+
+	err = nfnetlink_subsys_register(&xt_osf_nfnetlink);
+	if (err < 0) {
+		printk(KERN_ERR "Failed (%d) to register OSF nsfnetlink helper.\n", err);
+		goto err_out_exit;
+	}
+
+	err = xt_register_match(&xt_osf_match);
+	if (err) {
+		printk(KERN_ERR "Failed (%d) to register OS fingerprint "
+				"matching module.\n", err);
+		goto err_out_remove;
+	}
+
+	return 0;
+
+err_out_remove:
+	nfnetlink_subsys_unregister(&xt_osf_nfnetlink);
+err_out_exit:
+	return err;
+}
+
+static void __exit xt_osf_fini(void)
+{
+	struct xt_osf_finger *f;
+	int i;
+
+	nfnetlink_subsys_unregister(&xt_osf_nfnetlink);
+	xt_unregister_match(&xt_osf_match);
+
+	rcu_read_lock();
+	for (i=0; i<ARRAY_SIZE(xt_osf_fingers); ++i) {
+
+		list_for_each_entry_rcu(f, &xt_osf_fingers[i], finger_entry) {
+			list_del_rcu(&f->finger_entry);
+			call_rcu(&f->rcu_head, xt_osf_finger_free_rcu);
+		}
+	}
+	rcu_read_unlock();
+
+	rcu_barrier();
+}
+
+module_init(xt_osf_init);
+module_exit(xt_osf_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
+MODULE_DESCRIPTION("Passive OS fingerprint matching.");
+MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_OSF);
diff --git a/net/netfilter/xt_policy.c b/net/netfilter/xt_policy.c
index 328bd20ddd2..4cbfebda8fa 100644
--- a/net/netfilter/xt_policy.c
+++ b/net/netfilter/xt_policy.c
@@ -86,7 +86,7 @@ match_policy_out(const struct sk_buff *skb, const struct xt_policy_info *info,
 		 unsigned short family)
 {
 	const struct xt_policy_elem *e;
-	const struct dst_entry *dst = skb->dst;
+	const struct dst_entry *dst = skb_dst(skb);
 	int strict = info->flags & XT_POLICY_MATCH_STRICT;
 	int i, pos;
 
diff --git a/net/netfilter/xt_realm.c b/net/netfilter/xt_realm.c
index 67419287bc7..484d1689bfd 100644
--- a/net/netfilter/xt_realm.c
+++ b/net/netfilter/xt_realm.c
@@ -25,7 +25,7 @@ static bool
 realm_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 {
 	const struct xt_realm_info *info = par->matchinfo;
-	const struct dst_entry *dst = skb->dst;
+	const struct dst_entry *dst = skb_dst(skb);
 
 	return (info->id == (dst->tclassid & info->mask)) ^ info->invert;
 }
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 1acc089be7e..ebf00ad5b19 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -22,6 +22,8 @@
 #include <net/netfilter/nf_tproxy_core.h>
 #include <net/netfilter/ipv4/nf_defrag_ipv4.h>
 
+#include <linux/netfilter/xt_socket.h>
+
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 #define XT_SOCKET_HAVE_CONNTRACK 1
 #include <net/netfilter/nf_conntrack.h>
@@ -86,7 +88,8 @@ extract_icmp_fields(const struct sk_buff *skb,
 
 
 static bool
-socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
+socket_match(const struct sk_buff *skb, const struct xt_match_param *par,
+	     const struct xt_socket_mtinfo1 *info)
 {
 	const struct iphdr *iph = ip_hdr(skb);
 	struct udphdr _hdr, *hp = NULL;
@@ -141,10 +144,24 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 	sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol,
 				   saddr, daddr, sport, dport, par->in, false);
 	if (sk != NULL) {
-		bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0);
+		bool wildcard;
+		bool transparent = true;
+
+		/* Ignore sockets listening on INADDR_ANY */
+		wildcard = (sk->sk_state != TCP_TIME_WAIT &&
+			    inet_sk(sk)->rcv_saddr == 0);
+
+		/* Ignore non-transparent sockets,
+		   if XT_SOCKET_TRANSPARENT is used */
+		if (info && info->flags & XT_SOCKET_TRANSPARENT)
+			transparent = ((sk->sk_state != TCP_TIME_WAIT &&
+					inet_sk(sk)->transparent) ||
+				       (sk->sk_state == TCP_TIME_WAIT &&
+					inet_twsk(sk)->tw_transparent));
 
 		nf_tproxy_put_sock(sk);
-		if (wildcard)
+
+		if (wildcard || !transparent)
 			sk = NULL;
 	}
 
@@ -157,23 +174,47 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 	return (sk != NULL);
 }
 
-static struct xt_match socket_mt_reg __read_mostly = {
-	.name		= "socket",
-	.family		= AF_INET,
-	.match		= socket_mt,
-	.hooks		= 1 << NF_INET_PRE_ROUTING,
-	.me		= THIS_MODULE,
+static bool
+socket_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	return socket_match(skb, par, NULL);
+}
+
+static bool
+socket_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	return socket_match(skb, par, par->matchinfo);
+}
+
+static struct xt_match socket_mt_reg[] __read_mostly = {
+	{
+		.name		= "socket",
+		.revision	= 0,
+		.family		= NFPROTO_IPV4,
+		.match		= socket_mt_v0,
+		.hooks		= 1 << NF_INET_PRE_ROUTING,
+		.me		= THIS_MODULE,
+	},
+	{
+		.name		= "socket",
+		.revision	= 1,
+		.family		= NFPROTO_IPV4,
+		.match		= socket_mt_v1,
+		.matchsize	= sizeof(struct xt_socket_mtinfo1),
+		.hooks		= 1 << NF_INET_PRE_ROUTING,
+		.me		= THIS_MODULE,
+	},
 };
 
 static int __init socket_mt_init(void)
 {
 	nf_defrag_ipv4_enable();
-	return xt_register_match(&socket_mt_reg);
+	return xt_register_matches(socket_mt_reg, ARRAY_SIZE(socket_mt_reg));
 }
 
 static void __exit socket_mt_exit(void)
 {
-	xt_unregister_match(&socket_mt_reg);
+	xt_unregister_matches(socket_mt_reg, ARRAY_SIZE(socket_mt_reg));
 }
 
 module_init(socket_mt_init);
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index bf1ab1a6790..e639298bc9c 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -785,18 +785,6 @@ static struct genl_ops netlbl_cipsov4_ops[] = {
  */
 int __init netlbl_cipsov4_genl_init(void)
 {
-	int ret_val, i;
-
-	ret_val = genl_register_family(&netlbl_cipsov4_gnl_family);
-	if (ret_val != 0)
-		return ret_val;
-
-	for (i = 0; i < ARRAY_SIZE(netlbl_cipsov4_ops); i++) {
-		ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
-				&netlbl_cipsov4_ops[i]);
-		if (ret_val != 0)
-			return ret_val;
-	}
-
-	return 0;
+	return genl_register_family_with_ops(&netlbl_cipsov4_gnl_family,
+		netlbl_cipsov4_ops, ARRAY_SIZE(netlbl_cipsov4_ops));
 }
diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c
index 1821c5d50fb..8203623e65a 100644
--- a/net/netlabel/netlabel_mgmt.c
+++ b/net/netlabel/netlabel_mgmt.c
@@ -779,18 +779,6 @@ static struct genl_ops netlbl_mgmt_genl_ops[] = {
  */
 int __init netlbl_mgmt_genl_init(void)
 {
-	int ret_val, i;
-
-	ret_val = genl_register_family(&netlbl_mgmt_gnl_family);
-	if (ret_val != 0)
-		return ret_val;
-
-	for (i = 0; i < ARRAY_SIZE(netlbl_mgmt_genl_ops); i++) {
-		ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
-				&netlbl_mgmt_genl_ops[i]);
-		if (ret_val != 0)
-			return ret_val;
-	}
-
-	return 0;
+	return genl_register_family_with_ops(&netlbl_mgmt_gnl_family,
+		netlbl_mgmt_genl_ops, ARRAY_SIZE(netlbl_mgmt_genl_ops));
 }
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index f3c5c68c684..fb357f01018 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1478,20 +1478,8 @@ static struct genl_ops netlbl_unlabel_genl_ops[] = {
  */
 int __init netlbl_unlabel_genl_init(void)
 {
-	int ret_val, i;
-
-	ret_val = genl_register_family(&netlbl_unlabel_gnl_family);
-	if (ret_val != 0)
-		return ret_val;
-
-	for (i = 0; i < ARRAY_SIZE(netlbl_unlabel_genl_ops); i++) {
-		ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
-				&netlbl_unlabel_genl_ops[i]);
-		if (ret_val != 0)
-			return ret_val;
-	}
-
-	return 0;
+	return genl_register_family_with_ops(&netlbl_unlabel_gnl_family,
+		netlbl_unlabel_genl_ops, ARRAY_SIZE(netlbl_unlabel_genl_ops));
 }
 
 /*
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 1d3dd30099d..eed4c6a8afc 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -384,6 +384,52 @@ errout:
 }
 
 /**
+ * genl_register_family_with_ops - register a generic netlink family
+ * @family: generic netlink family
+ * @ops: operations to be registered
+ * @n_ops: number of elements to register
+ *
+ * Registers the specified family and operations from the specified table.
+ * Only one family may be registered with the same family name or identifier.
+ *
+ * The family id may equal GENL_ID_GENERATE causing an unique id to
+ * be automatically generated and assigned.
+ *
+ * Either a doit or dumpit callback must be specified for every registered
+ * operation or the function will fail. Only one operation structure per
+ * command identifier may be registered.
+ *
+ * See include/net/genetlink.h for more documenation on the operations
+ * structure.
+ *
+ * This is equivalent to calling genl_register_family() followed by
+ * genl_register_ops() for every operation entry in the table taking
+ * care to unregister the family on error path.
+ *
+ * Return 0 on success or a negative error code.
+ */
+int genl_register_family_with_ops(struct genl_family *family,
+	struct genl_ops *ops, size_t n_ops)
+{
+	int err, i;
+
+	err = genl_register_family(family);
+	if (err)
+		return err;
+
+	for (i = 0; i < n_ops; ++i, ++ops) {
+		err = genl_register_ops(family, ops);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+err_out:
+	genl_unregister_family(family);
+	return err;
+}
+EXPORT_SYMBOL(genl_register_family_with_ops);
+
+/**
  * genl_unregister_family - unregister generic netlink family
  * @family: generic netlink family
  *
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index f546e81acc4..4f76e5552d8 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -39,6 +39,7 @@
  *					will simply extend the hardware address
  *					byte arrays at the end of sockaddr_ll
  *					and packet_mreq.
+ *		Johann Baudy	:	Added TX RING.
  *
  *		This program is free software; you can redistribute it and/or
  *		modify it under the terms of the GNU General Public License
@@ -157,7 +158,25 @@ struct packet_mreq_max
 };
 
 #ifdef CONFIG_PACKET_MMAP
-static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing);
+static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
+		int closing, int tx_ring);
+
+struct packet_ring_buffer {
+	char *			*pg_vec;
+	unsigned int		head;
+	unsigned int		frames_per_block;
+	unsigned int		frame_size;
+	unsigned int		frame_max;
+
+	unsigned int		pg_vec_order;
+	unsigned int		pg_vec_pages;
+	unsigned int		pg_vec_len;
+
+	atomic_t		pending;
+};
+
+struct packet_sock;
+static int tpacket_snd(struct packet_sock *po, struct msghdr *msg);
 #endif
 
 static void packet_flush_mclist(struct sock *sk);
@@ -167,11 +186,8 @@ struct packet_sock {
 	struct sock		sk;
 	struct tpacket_stats	stats;
 #ifdef CONFIG_PACKET_MMAP
-	char *			*pg_vec;
-	unsigned int		head;
-	unsigned int            frames_per_block;
-	unsigned int		frame_size;
-	unsigned int		frame_max;
+	struct packet_ring_buffer	rx_ring;
+	struct packet_ring_buffer	tx_ring;
 	int			copy_thresh;
 #endif
 	struct packet_type	prot_hook;
@@ -185,12 +201,10 @@ struct packet_sock {
 	struct packet_mclist	*mclist;
 #ifdef CONFIG_PACKET_MMAP
 	atomic_t		mapped;
-	unsigned int            pg_vec_order;
-	unsigned int		pg_vec_pages;
-	unsigned int		pg_vec_len;
 	enum tpacket_versions	tp_version;
 	unsigned int		tp_hdrlen;
 	unsigned int		tp_reserve;
+	unsigned int		tp_loss:1;
 #endif
 };
 
@@ -206,36 +220,33 @@ struct packet_skb_cb {
 
 #ifdef CONFIG_PACKET_MMAP
 
-static void *packet_lookup_frame(struct packet_sock *po, unsigned int position,
-				 int status)
+static void __packet_set_status(struct packet_sock *po, void *frame, int status)
 {
-	unsigned int pg_vec_pos, frame_offset;
 	union {
 		struct tpacket_hdr *h1;
 		struct tpacket2_hdr *h2;
 		void *raw;
 	} h;
 
-	pg_vec_pos = position / po->frames_per_block;
-	frame_offset = position % po->frames_per_block;
-
-	h.raw = po->pg_vec[pg_vec_pos] + (frame_offset * po->frame_size);
+	h.raw = frame;
 	switch (po->tp_version) {
 	case TPACKET_V1:
-		if (status != (h.h1->tp_status ? TP_STATUS_USER :
-						TP_STATUS_KERNEL))
-			return NULL;
+		h.h1->tp_status = status;
+		flush_dcache_page(virt_to_page(&h.h1->tp_status));
 		break;
 	case TPACKET_V2:
-		if (status != (h.h2->tp_status ? TP_STATUS_USER :
-						TP_STATUS_KERNEL))
-			return NULL;
+		h.h2->tp_status = status;
+		flush_dcache_page(virt_to_page(&h.h2->tp_status));
 		break;
+	default:
+		printk(KERN_ERR "TPACKET version not supported\n");
+		BUG();
 	}
-	return h.raw;
+
+	smp_wmb();
 }
 
-static void __packet_set_status(struct packet_sock *po, void *frame, int status)
+static int __packet_get_status(struct packet_sock *po, void *frame)
 {
 	union {
 		struct tpacket_hdr *h1;
@@ -243,16 +254,66 @@ static void __packet_set_status(struct packet_sock *po, void *frame, int status)
 		void *raw;
 	} h;
 
+	smp_rmb();
+
 	h.raw = frame;
 	switch (po->tp_version) {
 	case TPACKET_V1:
-		h.h1->tp_status = status;
-		break;
+		flush_dcache_page(virt_to_page(&h.h1->tp_status));
+		return h.h1->tp_status;
 	case TPACKET_V2:
-		h.h2->tp_status = status;
-		break;
+		flush_dcache_page(virt_to_page(&h.h2->tp_status));
+		return h.h2->tp_status;
+	default:
+		printk(KERN_ERR "TPACKET version not supported\n");
+		BUG();
+		return 0;
 	}
 }
+
+static void *packet_lookup_frame(struct packet_sock *po,
+		struct packet_ring_buffer *rb,
+		unsigned int position,
+		int status)
+{
+	unsigned int pg_vec_pos, frame_offset;
+	union {
+		struct tpacket_hdr *h1;
+		struct tpacket2_hdr *h2;
+		void *raw;
+	} h;
+
+	pg_vec_pos = position / rb->frames_per_block;
+	frame_offset = position % rb->frames_per_block;
+
+	h.raw = rb->pg_vec[pg_vec_pos] + (frame_offset * rb->frame_size);
+
+	if (status != __packet_get_status(po, h.raw))
+		return NULL;
+
+	return h.raw;
+}
+
+static inline void *packet_current_frame(struct packet_sock *po,
+		struct packet_ring_buffer *rb,
+		int status)
+{
+	return packet_lookup_frame(po, rb, rb->head, status);
+}
+
+static inline void *packet_previous_frame(struct packet_sock *po,
+		struct packet_ring_buffer *rb,
+		int status)
+{
+	unsigned int previous = rb->head ? rb->head - 1 : rb->frame_max;
+	return packet_lookup_frame(po, rb, previous, status);
+}
+
+static inline void packet_increment_head(struct packet_ring_buffer *buff)
+{
+	buff->head = buff->head != buff->frame_max ? buff->head+1 : 0;
+}
+
 #endif
 
 static inline struct packet_sock *pkt_sk(struct sock *sk)
@@ -311,8 +372,7 @@ static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev,  struct
 		goto oom;
 
 	/* drop any routing info */
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 
 	/* drop conntrack reference */
 	nf_reset(skb);
@@ -560,8 +620,7 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev, struct packet
 
 	skb_set_owner_r(skb, sk);
 	skb->dev = NULL;
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 
 	/* drop conntrack reference */
 	nf_reset(skb);
@@ -648,7 +707,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
 		macoff = netoff - maclen;
 	}
 
-	if (macoff + snaplen > po->frame_size) {
+	if (macoff + snaplen > po->rx_ring.frame_size) {
 		if (po->copy_thresh &&
 		    atomic_read(&sk->sk_rmem_alloc) + skb->truesize <
 		    (unsigned)sk->sk_rcvbuf) {
@@ -661,16 +720,16 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
 			if (copy_skb)
 				skb_set_owner_r(copy_skb, sk);
 		}
-		snaplen = po->frame_size - macoff;
+		snaplen = po->rx_ring.frame_size - macoff;
 		if ((int)snaplen < 0)
 			snaplen = 0;
 	}
 
 	spin_lock(&sk->sk_receive_queue.lock);
-	h.raw = packet_lookup_frame(po, po->head, TP_STATUS_KERNEL);
+	h.raw = packet_current_frame(po, &po->rx_ring, TP_STATUS_KERNEL);
 	if (!h.raw)
 		goto ring_is_full;
-	po->head = po->head != po->frame_max ? po->head+1 : 0;
+	packet_increment_head(&po->rx_ring);
 	po->stats.tp_packets++;
 	if (copy_skb) {
 		status |= TP_STATUS_COPY;
@@ -727,7 +786,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
 
 	__packet_set_status(po, h.raw, status);
 	smp_mb();
-
 	{
 		struct page *p_start, *p_end;
 		u8 *h_end = h.raw + macoff + snaplen - 1;
@@ -760,10 +818,249 @@ ring_is_full:
 	goto drop_n_restore;
 }
 
-#endif
+static void tpacket_destruct_skb(struct sk_buff *skb)
+{
+	struct packet_sock *po = pkt_sk(skb->sk);
+	void * ph;
 
+	BUG_ON(skb == NULL);
 
-static int packet_sendmsg(struct kiocb *iocb, struct socket *sock,
+	if (likely(po->tx_ring.pg_vec)) {
+		ph = skb_shinfo(skb)->destructor_arg;
+		BUG_ON(__packet_get_status(po, ph) != TP_STATUS_SENDING);
+		BUG_ON(atomic_read(&po->tx_ring.pending) == 0);
+		atomic_dec(&po->tx_ring.pending);
+		__packet_set_status(po, ph, TP_STATUS_AVAILABLE);
+	}
+
+	sock_wfree(skb);
+}
+
+static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff * skb,
+		void * frame, struct net_device *dev, int size_max,
+		__be16 proto, unsigned char * addr)
+{
+	union {
+		struct tpacket_hdr *h1;
+		struct tpacket2_hdr *h2;
+		void *raw;
+	} ph;
+	int to_write, offset, len, tp_len, nr_frags, len_max;
+	struct socket *sock = po->sk.sk_socket;
+	struct page *page;
+	void *data;
+	int err;
+
+	ph.raw = frame;
+
+	skb->protocol = proto;
+	skb->dev = dev;
+	skb->priority = po->sk.sk_priority;
+	skb_shinfo(skb)->destructor_arg = ph.raw;
+
+	switch (po->tp_version) {
+	case TPACKET_V2:
+		tp_len = ph.h2->tp_len;
+		break;
+	default:
+		tp_len = ph.h1->tp_len;
+		break;
+	}
+	if (unlikely(tp_len > size_max)) {
+		printk(KERN_ERR "packet size is too long (%d > %d)\n",
+				tp_len, size_max);
+		return -EMSGSIZE;
+	}
+
+	skb_reserve(skb, LL_RESERVED_SPACE(dev));
+	skb_reset_network_header(skb);
+
+	data = ph.raw + po->tp_hdrlen - sizeof(struct sockaddr_ll);
+	to_write = tp_len;
+
+	if (sock->type == SOCK_DGRAM) {
+		err = dev_hard_header(skb, dev, ntohs(proto), addr,
+				NULL, tp_len);
+		if (unlikely(err < 0))
+			return -EINVAL;
+	} else if (dev->hard_header_len ) {
+		/* net device doesn't like empty head */
+		if (unlikely(tp_len <= dev->hard_header_len)) {
+			printk(KERN_ERR "packet size is too short "
+					"(%d < %d)\n", tp_len,
+					dev->hard_header_len);
+			return -EINVAL;
+		}
+
+		skb_push(skb, dev->hard_header_len);
+		err = skb_store_bits(skb, 0, data,
+				dev->hard_header_len);
+		if (unlikely(err))
+			return err;
+
+		data += dev->hard_header_len;
+		to_write -= dev->hard_header_len;
+	}
+
+	err = -EFAULT;
+	page = virt_to_page(data);
+	offset = offset_in_page(data);
+	len_max = PAGE_SIZE - offset;
+	len = ((to_write > len_max) ? len_max : to_write);
+
+	skb->data_len = to_write;
+	skb->len += to_write;
+	skb->truesize += to_write;
+	atomic_add(to_write, &po->sk.sk_wmem_alloc);
+
+	while (likely(to_write)) {
+		nr_frags = skb_shinfo(skb)->nr_frags;
+
+		if (unlikely(nr_frags >= MAX_SKB_FRAGS)) {
+			printk(KERN_ERR "Packet exceed the number "
+					"of skb frags(%lu)\n",
+					MAX_SKB_FRAGS);
+			return -EFAULT;
+		}
+
+		flush_dcache_page(page);
+		get_page(page);
+		skb_fill_page_desc(skb,
+				nr_frags,
+				page++, offset, len);
+		to_write -= len;
+		offset = 0;
+		len_max = PAGE_SIZE;
+		len = ((to_write > len_max) ? len_max : to_write);
+	}
+
+	return tp_len;
+}
+
+static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
+{
+	struct socket *sock;
+	struct sk_buff *skb;
+	struct net_device *dev;
+	__be16 proto;
+	int ifindex, err, reserve = 0;
+	void * ph;
+	struct sockaddr_ll *saddr=(struct sockaddr_ll *)msg->msg_name;
+	int tp_len, size_max;
+	unsigned char *addr;
+	int len_sum = 0;
+	int status = 0;
+
+	sock = po->sk.sk_socket;
+
+	mutex_lock(&po->pg_vec_lock);
+
+	err = -EBUSY;
+	if (saddr == NULL) {
+		ifindex	= po->ifindex;
+		proto	= po->num;
+		addr	= NULL;
+	} else {
+		err = -EINVAL;
+		if (msg->msg_namelen < sizeof(struct sockaddr_ll))
+			goto out;
+		if (msg->msg_namelen < (saddr->sll_halen
+					+ offsetof(struct sockaddr_ll,
+						sll_addr)))
+			goto out;
+		ifindex	= saddr->sll_ifindex;
+		proto	= saddr->sll_protocol;
+		addr	= saddr->sll_addr;
+	}
+
+	dev = dev_get_by_index(sock_net(&po->sk), ifindex);
+	err = -ENXIO;
+	if (unlikely(dev == NULL))
+		goto out;
+
+	reserve = dev->hard_header_len;
+
+	err = -ENETDOWN;
+	if (unlikely(!(dev->flags & IFF_UP)))
+		goto out_put;
+
+	size_max = po->tx_ring.frame_size
+		- sizeof(struct skb_shared_info)
+		- po->tp_hdrlen
+		- LL_ALLOCATED_SPACE(dev)
+		- sizeof(struct sockaddr_ll);
+
+	if (size_max > dev->mtu + reserve)
+		size_max = dev->mtu + reserve;
+
+	do {
+		ph = packet_current_frame(po, &po->tx_ring,
+				TP_STATUS_SEND_REQUEST);
+
+		if (unlikely(ph == NULL)) {
+			schedule();
+			continue;
+		}
+
+		status = TP_STATUS_SEND_REQUEST;
+		skb = sock_alloc_send_skb(&po->sk,
+				LL_ALLOCATED_SPACE(dev)
+				+ sizeof(struct sockaddr_ll),
+				0, &err);
+
+		if (unlikely(skb == NULL))
+			goto out_status;
+
+		tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto,
+				addr);
+
+		if (unlikely(tp_len < 0)) {
+			if (po->tp_loss) {
+				__packet_set_status(po, ph,
+						TP_STATUS_AVAILABLE);
+				packet_increment_head(&po->tx_ring);
+				kfree_skb(skb);
+				continue;
+			} else {
+				status = TP_STATUS_WRONG_FORMAT;
+				err = tp_len;
+				goto out_status;
+			}
+		}
+
+		skb->destructor = tpacket_destruct_skb;
+		__packet_set_status(po, ph, TP_STATUS_SENDING);
+		atomic_inc(&po->tx_ring.pending);
+
+		status = TP_STATUS_SEND_REQUEST;
+		err = dev_queue_xmit(skb);
+		if (unlikely(err > 0 && (err = net_xmit_errno(err)) != 0))
+			goto out_xmit;
+		packet_increment_head(&po->tx_ring);
+		len_sum += tp_len;
+	}
+	while (likely((ph != NULL) || ((!(msg->msg_flags & MSG_DONTWAIT))
+					&& (atomic_read(&po->tx_ring.pending))))
+	      );
+
+	err = len_sum;
+	goto out_put;
+
+out_xmit:
+	skb->destructor = sock_wfree;
+	atomic_dec(&po->tx_ring.pending);
+out_status:
+	__packet_set_status(po, ph, status);
+	kfree_skb(skb);
+out_put:
+	dev_put(dev);
+out:
+	mutex_unlock(&po->pg_vec_lock);
+	return err;
+}
+#endif
+
+static int packet_snd(struct socket *sock,
 			  struct msghdr *msg, size_t len)
 {
 	struct sock *sk = sock->sk;
@@ -854,6 +1151,19 @@ out:
 	return err;
 }
 
+static int packet_sendmsg(struct kiocb *iocb, struct socket *sock,
+		struct msghdr *msg, size_t len)
+{
+#ifdef CONFIG_PACKET_MMAP
+	struct sock *sk = sock->sk;
+	struct packet_sock *po = pkt_sk(sk);
+	if (po->tx_ring.pg_vec)
+		return tpacket_snd(po, msg);
+	else
+#endif
+		return packet_snd(sock, msg, len);
+}
+
 /*
  *	Close a PACKET socket. This is fairly simple. We immediately go
  *	to 'closed' state and remove our protocol entry in the device list.
@@ -864,6 +1174,9 @@ static int packet_release(struct socket *sock)
 	struct sock *sk = sock->sk;
 	struct packet_sock *po;
 	struct net *net;
+#ifdef CONFIG_PACKET_MMAP
+	struct tpacket_req req;
+#endif
 
 	if (!sk)
 		return 0;
@@ -893,11 +1206,13 @@ static int packet_release(struct socket *sock)
 	packet_flush_mclist(sk);
 
 #ifdef CONFIG_PACKET_MMAP
-	if (po->pg_vec) {
-		struct tpacket_req req;
-		memset(&req, 0, sizeof(req));
-		packet_set_ring(sk, &req, 1);
-	}
+	memset(&req, 0, sizeof(req));
+
+	if (po->rx_ring.pg_vec)
+		packet_set_ring(sk, &req, 1, 0);
+
+	if (po->tx_ring.pg_vec)
+		packet_set_ring(sk, &req, 1, 1);
 #endif
 
 	/*
@@ -1253,9 +1568,9 @@ static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
 	switch (i->type) {
 	case PACKET_MR_MULTICAST:
 		if (what > 0)
-			dev_mc_add(dev, i->addr, i->alen, 0);
+			return dev_mc_add(dev, i->addr, i->alen, 0);
 		else
-			dev_mc_delete(dev, i->addr, i->alen, 0);
+			return dev_mc_delete(dev, i->addr, i->alen, 0);
 		break;
 	case PACKET_MR_PROMISC:
 		return dev_set_promiscuity(dev, what);
@@ -1263,6 +1578,12 @@ static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
 	case PACKET_MR_ALLMULTI:
 		return dev_set_allmulti(dev, what);
 		break;
+	case PACKET_MR_UNICAST:
+		if (what > 0)
+			return dev_unicast_add(dev, i->addr);
+		else
+			return dev_unicast_delete(dev, i->addr);
+		break;
 	default:;
 	}
 	return 0;
@@ -1391,7 +1712,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 	if (level != SOL_PACKET)
 		return -ENOPROTOOPT;
 
-	switch(optname)	{
+	switch (optname) {
 	case PACKET_ADD_MEMBERSHIP:
 	case PACKET_DROP_MEMBERSHIP:
 	{
@@ -1415,6 +1736,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 
 #ifdef CONFIG_PACKET_MMAP
 	case PACKET_RX_RING:
+	case PACKET_TX_RING:
 	{
 		struct tpacket_req req;
 
@@ -1422,7 +1744,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 			return -EINVAL;
 		if (copy_from_user(&req,optval,sizeof(req)))
 			return -EFAULT;
-		return packet_set_ring(sk, &req, 0);
+		return packet_set_ring(sk, &req, 0, optname == PACKET_TX_RING);
 	}
 	case PACKET_COPY_THRESH:
 	{
@@ -1442,7 +1764,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 
 		if (optlen != sizeof(val))
 			return -EINVAL;
-		if (po->pg_vec)
+		if (po->rx_ring.pg_vec || po->tx_ring.pg_vec)
 			return -EBUSY;
 		if (copy_from_user(&val, optval, sizeof(val)))
 			return -EFAULT;
@@ -1461,13 +1783,26 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 
 		if (optlen != sizeof(val))
 			return -EINVAL;
-		if (po->pg_vec)
+		if (po->rx_ring.pg_vec || po->tx_ring.pg_vec)
 			return -EBUSY;
 		if (copy_from_user(&val, optval, sizeof(val)))
 			return -EFAULT;
 		po->tp_reserve = val;
 		return 0;
 	}
+	case PACKET_LOSS:
+	{
+		unsigned int val;
+
+		if (optlen != sizeof(val))
+			return -EINVAL;
+		if (po->rx_ring.pg_vec || po->tx_ring.pg_vec)
+			return -EBUSY;
+		if (copy_from_user(&val, optval, sizeof(val)))
+			return -EFAULT;
+		po->tp_loss = !!val;
+		return 0;
+	}
 #endif
 	case PACKET_AUXDATA:
 	{
@@ -1517,7 +1852,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 	if (len < 0)
 		return -EINVAL;
 
-	switch(optname)	{
+	switch (optname) {
 	case PACKET_STATISTICS:
 		if (len > sizeof(struct tpacket_stats))
 			len = sizeof(struct tpacket_stats);
@@ -1573,6 +1908,12 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 		val = po->tp_reserve;
 		data = &val;
 		break;
+	case PACKET_LOSS:
+		if (len > sizeof(unsigned int))
+			len = sizeof(unsigned int);
+		val = po->tp_loss;
+		data = &val;
+		break;
 #endif
 	default:
 		return -ENOPROTOOPT;
@@ -1643,7 +1984,7 @@ static int packet_ioctl(struct socket *sock, unsigned int cmd,
 {
 	struct sock *sk = sock->sk;
 
-	switch(cmd) {
+	switch (cmd) {
 		case SIOCOUTQ:
 		{
 			int amount = atomic_read(&sk->sk_wmem_alloc);
@@ -1705,13 +2046,17 @@ static unsigned int packet_poll(struct file * file, struct socket *sock,
 	unsigned int mask = datagram_poll(file, sock, wait);
 
 	spin_lock_bh(&sk->sk_receive_queue.lock);
-	if (po->pg_vec) {
-		unsigned last = po->head ? po->head-1 : po->frame_max;
-
-		if (packet_lookup_frame(po, last, TP_STATUS_USER))
+	if (po->rx_ring.pg_vec) {
+		if (!packet_previous_frame(po, &po->rx_ring, TP_STATUS_KERNEL))
 			mask |= POLLIN | POLLRDNORM;
 	}
 	spin_unlock_bh(&sk->sk_receive_queue.lock);
+	spin_lock_bh(&sk->sk_write_queue.lock);
+	if (po->tx_ring.pg_vec) {
+		if (packet_current_frame(po, &po->tx_ring, TP_STATUS_AVAILABLE))
+			mask |= POLLOUT | POLLWRNORM;
+	}
+	spin_unlock_bh(&sk->sk_write_queue.lock);
 	return mask;
 }
 
@@ -1788,21 +2133,33 @@ out_free_pgvec:
 	goto out;
 }
 
-static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing)
+static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
+		int closing, int tx_ring)
 {
 	char **pg_vec = NULL;
 	struct packet_sock *po = pkt_sk(sk);
 	int was_running, order = 0;
+	struct packet_ring_buffer *rb;
+	struct sk_buff_head *rb_queue;
 	__be16 num;
-	int err = 0;
+	int err;
 
-	if (req->tp_block_nr) {
-		int i;
+	rb = tx_ring ? &po->tx_ring : &po->rx_ring;
+	rb_queue = tx_ring ? &sk->sk_write_queue : &sk->sk_receive_queue;
 
-		/* Sanity tests and some calculations */
+	err = -EBUSY;
+	if (!closing) {
+		if (atomic_read(&po->mapped))
+			goto out;
+		if (atomic_read(&rb->pending))
+			goto out;
+	}
 
-		if (unlikely(po->pg_vec))
-			return -EBUSY;
+	if (req->tp_block_nr) {
+		/* Sanity tests and some calculations */
+		err = -EBUSY;
+		if (unlikely(rb->pg_vec))
+			goto out;
 
 		switch (po->tp_version) {
 		case TPACKET_V1:
@@ -1813,42 +2170,35 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing
 			break;
 		}
 
+		err = -EINVAL;
 		if (unlikely((int)req->tp_block_size <= 0))
-			return -EINVAL;
+			goto out;
 		if (unlikely(req->tp_block_size & (PAGE_SIZE - 1)))
-			return -EINVAL;
+			goto out;
 		if (unlikely(req->tp_frame_size < po->tp_hdrlen +
-						  po->tp_reserve))
-			return -EINVAL;
+					po->tp_reserve))
+			goto out;
 		if (unlikely(req->tp_frame_size & (TPACKET_ALIGNMENT - 1)))
-			return -EINVAL;
+			goto out;
 
-		po->frames_per_block = req->tp_block_size/req->tp_frame_size;
-		if (unlikely(po->frames_per_block <= 0))
-			return -EINVAL;
-		if (unlikely((po->frames_per_block * req->tp_block_nr) !=
-			     req->tp_frame_nr))
-			return -EINVAL;
+		rb->frames_per_block = req->tp_block_size/req->tp_frame_size;
+		if (unlikely(rb->frames_per_block <= 0))
+			goto out;
+		if (unlikely((rb->frames_per_block * req->tp_block_nr) !=
+					req->tp_frame_nr))
+			goto out;
 
 		err = -ENOMEM;
 		order = get_order(req->tp_block_size);
 		pg_vec = alloc_pg_vec(req, order);
 		if (unlikely(!pg_vec))
 			goto out;
-
-		for (i = 0; i < req->tp_block_nr; i++) {
-			void *ptr = pg_vec[i];
-			int k;
-
-			for (k = 0; k < po->frames_per_block; k++) {
-				__packet_set_status(po, ptr, TP_STATUS_KERNEL);
-				ptr += req->tp_frame_size;
-			}
-		}
-		/* Done */
-	} else {
+	}
+	/* Done */
+	else {
+		err = -EINVAL;
 		if (unlikely(req->tp_frame_nr))
-			return -EINVAL;
+			goto out;
 	}
 
 	lock_sock(sk);
@@ -1872,23 +2222,24 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing
 	if (closing || atomic_read(&po->mapped) == 0) {
 		err = 0;
 #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; })
-
-		spin_lock_bh(&sk->sk_receive_queue.lock);
-		pg_vec = XC(po->pg_vec, pg_vec);
-		po->frame_max = (req->tp_frame_nr - 1);
-		po->head = 0;
-		po->frame_size = req->tp_frame_size;
-		spin_unlock_bh(&sk->sk_receive_queue.lock);
-
-		order = XC(po->pg_vec_order, order);
-		req->tp_block_nr = XC(po->pg_vec_len, req->tp_block_nr);
-
-		po->pg_vec_pages = req->tp_block_size/PAGE_SIZE;
-		po->prot_hook.func = po->pg_vec ? tpacket_rcv : packet_rcv;
-		skb_queue_purge(&sk->sk_receive_queue);
+		spin_lock_bh(&rb_queue->lock);
+		pg_vec = XC(rb->pg_vec, pg_vec);
+		rb->frame_max = (req->tp_frame_nr - 1);
+		rb->head = 0;
+		rb->frame_size = req->tp_frame_size;
+		spin_unlock_bh(&rb_queue->lock);
+
+		order = XC(rb->pg_vec_order, order);
+		req->tp_block_nr = XC(rb->pg_vec_len, req->tp_block_nr);
+
+		rb->pg_vec_pages = req->tp_block_size/PAGE_SIZE;
+		po->prot_hook.func = (po->rx_ring.pg_vec) ?
+						tpacket_rcv : packet_rcv;
+		skb_queue_purge(rb_queue);
 #undef XC
 		if (atomic_read(&po->mapped))
-			printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped));
+			printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n",
+						atomic_read(&po->mapped));
 	}
 	mutex_unlock(&po->pg_vec_lock);
 
@@ -1909,11 +2260,13 @@ out:
 	return err;
 }
 
-static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_struct *vma)
+static int packet_mmap(struct file *file, struct socket *sock,
+		struct vm_area_struct *vma)
 {
 	struct sock *sk = sock->sk;
 	struct packet_sock *po = pkt_sk(sk);
-	unsigned long size;
+	unsigned long size, expected_size;
+	struct packet_ring_buffer *rb;
 	unsigned long start;
 	int err = -EINVAL;
 	int i;
@@ -1921,26 +2274,43 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st
 	if (vma->vm_pgoff)
 		return -EINVAL;
 
-	size = vma->vm_end - vma->vm_start;
-
 	mutex_lock(&po->pg_vec_lock);
-	if (po->pg_vec == NULL)
+
+	expected_size = 0;
+	for (rb = &po->rx_ring; rb <= &po->tx_ring; rb++) {
+		if (rb->pg_vec) {
+			expected_size += rb->pg_vec_len
+						* rb->pg_vec_pages
+						* PAGE_SIZE;
+		}
+	}
+
+	if (expected_size == 0)
 		goto out;
-	if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE)
+
+	size = vma->vm_end - vma->vm_start;
+	if (size != expected_size)
 		goto out;
 
 	start = vma->vm_start;
-	for (i = 0; i < po->pg_vec_len; i++) {
-		struct page *page = virt_to_page(po->pg_vec[i]);
-		int pg_num;
-
-		for (pg_num = 0; pg_num < po->pg_vec_pages; pg_num++, page++) {
-			err = vm_insert_page(vma, start, page);
-			if (unlikely(err))
-				goto out;
-			start += PAGE_SIZE;
+	for (rb = &po->rx_ring; rb <= &po->tx_ring; rb++) {
+		if (rb->pg_vec == NULL)
+			continue;
+
+		for (i = 0; i < rb->pg_vec_len; i++) {
+			struct page *page = virt_to_page(rb->pg_vec[i]);
+			int pg_num;
+
+			for (pg_num = 0; pg_num < rb->pg_vec_pages;
+					pg_num++,page++) {
+				err = vm_insert_page(vma, start, page);
+				if (unlikely(err))
+					goto out;
+				start += PAGE_SIZE;
+			}
 		}
 	}
+
 	atomic_inc(&po->mapped);
 	vma->vm_ops = &packet_mmap_ops;
 	err = 0;
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 4aa888584d2..480839dfc56 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -115,10 +115,10 @@ static int gprs_recv(struct gprs_dev *gp, struct sk_buff *skb)
 		rskb->truesize += rskb->len;
 
 		/* Avoid nested fragments */
-		for (fs = skb_shinfo(skb)->frag_list; fs; fs = fs->next)
+		skb_walk_frags(skb, fs)
 			flen += fs->len;
 		skb->next = skb_shinfo(skb)->frag_list;
-		skb_shinfo(skb)->frag_list = NULL;
+		skb_frag_list_init(skb);
 		skb->len -= flen;
 		skb->data_len -= flen;
 		skb->truesize -= flen;
@@ -212,8 +212,9 @@ static int gprs_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->stats.tx_bytes += len;
 	}
 
-	if (!pep_writeable(sk))
-		netif_stop_queue(dev);
+	netif_stop_queue(dev);
+	if (pep_writeable(sk))
+		netif_wake_queue(dev);
 	return 0;
 }
 
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 8ad2b533388..eef833ea6d7 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -940,10 +940,10 @@ int pep_write(struct sock *sk, struct sk_buff *skb)
 	rskb->truesize += rskb->len;
 
 	/* Avoid nested fragments */
-	for (fs = skb_shinfo(skb)->frag_list; fs; fs = fs->next)
+	skb_walk_frags(skb, fs)
 		flen += fs->len;
 	skb->next = skb_shinfo(skb)->frag_list;
-	skb_shinfo(skb)->frag_list = NULL;
+	skb_frag_list_init(skb);
 	skb->len -= flen;
 	skb->data_len -= flen;
 	skb->truesize -= flen;
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index 20cf16fc572..b11e7e52786 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -35,7 +35,6 @@
 #include <linux/kernel.h>
 #include <linux/in.h>
 #include <linux/poll.h>
-#include <linux/version.h>
 #include <net/sock.h>
 
 #include "rds.h"
diff --git a/net/rds/connection.c b/net/rds/connection.c
index 273f064930a..d14445c4830 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -148,14 +148,12 @@ static struct rds_connection *__rds_conn_create(__be32 laddr, __be32 faddr,
 	if (conn)
 		goto out;
 
-	conn = kmem_cache_alloc(rds_conn_slab, gfp);
+	conn = kmem_cache_zalloc(rds_conn_slab, gfp);
 	if (conn == NULL) {
 		conn = ERR_PTR(-ENOMEM);
 		goto out;
 	}
 
-	memset(conn, 0, sizeof(*conn));
-
 	INIT_HLIST_NODE(&conn->c_hash_node);
 	conn->c_version = RDS_PROTOCOL_3_0;
 	conn->c_laddr = laddr;
diff --git a/net/rds/ib.c b/net/rds/ib.c
index 4933b380985..b9bcd32431e 100644
--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -224,8 +224,8 @@ static int rds_ib_laddr_check(__be32 addr)
 	 * IB and iWARP capable NICs.
 	 */
 	cm_id = rdma_create_id(NULL, NULL, RDMA_PS_TCP);
-	if (!cm_id)
-		return -EADDRNOTAVAIL;
+	if (IS_ERR(cm_id))
+		return PTR_ERR(cm_id);
 
 	memset(&sin, 0, sizeof(sin));
 	sin.sin_family = AF_INET;
diff --git a/net/rds/ib.h b/net/rds/ib.h
index 069206cae73..455ae73047f 100644
--- a/net/rds/ib.h
+++ b/net/rds/ib.h
@@ -333,7 +333,7 @@ int rds_ib_xmit_rdma(struct rds_connection *conn, struct rds_rdma_op *op);
 void rds_ib_send_add_credits(struct rds_connection *conn, unsigned int credits);
 void rds_ib_advertise_credits(struct rds_connection *conn, unsigned int posted);
 int rds_ib_send_grab_credits(struct rds_ib_connection *ic, u32 wanted,
-			     u32 *adv_credits, int need_posted);
+			     u32 *adv_credits, int need_posted, int max_posted);
 
 /* ib_stats.c */
 DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats);
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index 36d931573ff..5709bad2832 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -524,7 +524,7 @@ void rds_ib_attempt_ack(struct rds_ib_connection *ic)
 	}
 
 	/* Can we get a send credit? */
-	if (!rds_ib_send_grab_credits(ic, 1, &adv_credits, 0)) {
+	if (!rds_ib_send_grab_credits(ic, 1, &adv_credits, 0, RDS_MAX_ADV_CREDIT)) {
 		rds_ib_stats_inc(s_ib_tx_throttle);
 		clear_bit(IB_ACK_IN_FLIGHT, &ic->i_ack_flags);
 		return;
diff --git a/net/rds/ib_ring.c b/net/rds/ib_ring.c
index 99a6ccae964..ff97e8eda85 100644
--- a/net/rds/ib_ring.c
+++ b/net/rds/ib_ring.c
@@ -137,7 +137,7 @@ int rds_ib_ring_empty(struct rds_ib_work_ring *ring)
 
 int rds_ib_ring_low(struct rds_ib_work_ring *ring)
 {
-	return __rds_ib_ring_used(ring) <= (ring->w_nr >> 2);
+	return __rds_ib_ring_used(ring) <= (ring->w_nr >> 1);
 }
 
 /*
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index cb6c52cb1c4..23bf830db2d 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -311,7 +311,7 @@ void rds_ib_send_cq_comp_handler(struct ib_cq *cq, void *context)
  * and using atomic_cmpxchg when updating the two counters.
  */
 int rds_ib_send_grab_credits(struct rds_ib_connection *ic,
-			     u32 wanted, u32 *adv_credits, int need_posted)
+			     u32 wanted, u32 *adv_credits, int need_posted, int max_posted)
 {
 	unsigned int avail, posted, got = 0, advertise;
 	long oldval, newval;
@@ -351,7 +351,7 @@ try_again:
 	 * available.
 	 */
 	if (posted && (got || need_posted)) {
-		advertise = min_t(unsigned int, posted, RDS_MAX_ADV_CREDIT);
+		advertise = min_t(unsigned int, posted, max_posted);
 		newval -= IB_SET_POST_CREDITS(advertise);
 	}
 
@@ -498,7 +498,7 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
 
 	credit_alloc = work_alloc;
 	if (ic->i_flowctl) {
-		credit_alloc = rds_ib_send_grab_credits(ic, work_alloc, &posted, 0);
+		credit_alloc = rds_ib_send_grab_credits(ic, work_alloc, &posted, 0, RDS_MAX_ADV_CREDIT);
 		adv_credits += posted;
 		if (credit_alloc < work_alloc) {
 			rds_ib_ring_unalloc(&ic->i_send_ring, work_alloc - credit_alloc);
@@ -506,7 +506,7 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
 			flow_controlled++;
 		}
 		if (work_alloc == 0) {
-			rds_ib_ring_unalloc(&ic->i_send_ring, work_alloc);
+			set_bit(RDS_LL_SEND_FULL, &conn->c_flags);
 			rds_ib_stats_inc(s_ib_tx_throttle);
 			ret = -ENOMEM;
 			goto out;
@@ -571,7 +571,7 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
 		/*
 		 * Update adv_credits since we reset the ACK_REQUIRED bit.
 		 */
-		rds_ib_send_grab_credits(ic, 0, &posted, 1);
+		rds_ib_send_grab_credits(ic, 0, &posted, 1, RDS_MAX_ADV_CREDIT - adv_credits);
 		adv_credits += posted;
 		BUG_ON(adv_credits > 255);
 	} else if (ic->i_rm != rm)
diff --git a/net/rds/info.c b/net/rds/info.c
index 1d885535214..62aeef37aef 100644
--- a/net/rds/info.c
+++ b/net/rds/info.c
@@ -188,10 +188,7 @@ int rds_info_getsockopt(struct socket *sock, int optname, char __user *optval,
 		ret = -ENOMEM;
 		goto out;
 	}
-	down_read(&current->mm->mmap_sem);
-	ret = get_user_pages(current, current->mm, start, nr_pages, 1, 0,
-			     pages, NULL);
-	up_read(&current->mm->mmap_sem);
+	ret = get_user_pages_fast(start, nr_pages, 1, pages);
 	if (ret != nr_pages) {
 		if (ret > 0)
 			nr_pages = ret;
diff --git a/net/rds/iw.c b/net/rds/iw.c
index b732efb5b63..d16e1cbc8e8 100644
--- a/net/rds/iw.c
+++ b/net/rds/iw.c
@@ -233,8 +233,8 @@ static int rds_iw_laddr_check(__be32 addr)
 	 * IB and iWARP capable NICs.
 	 */
 	cm_id = rdma_create_id(NULL, NULL, RDMA_PS_TCP);
-	if (!cm_id)
-		return -EADDRNOTAVAIL;
+	if (IS_ERR(cm_id))
+		return PTR_ERR(cm_id);
 
 	memset(&sin, 0, sizeof(sin));
 	sin.sin_family = AF_INET;
diff --git a/net/rds/iw.h b/net/rds/iw.h
index b4fb2725289..0715dde323e 100644
--- a/net/rds/iw.h
+++ b/net/rds/iw.h
@@ -361,7 +361,7 @@ int rds_iw_xmit_rdma(struct rds_connection *conn, struct rds_rdma_op *op);
 void rds_iw_send_add_credits(struct rds_connection *conn, unsigned int credits);
 void rds_iw_advertise_credits(struct rds_connection *conn, unsigned int posted);
 int rds_iw_send_grab_credits(struct rds_iw_connection *ic, u32 wanted,
-			     u32 *adv_credits, int need_posted);
+			     u32 *adv_credits, int need_posted, int max_posted);
 
 /* ib_stats.c */
 DECLARE_PER_CPU(struct rds_iw_statistics, rds_iw_stats);
diff --git a/net/rds/iw_recv.c b/net/rds/iw_recv.c
index fde470fa50d..8683f5f66c4 100644
--- a/net/rds/iw_recv.c
+++ b/net/rds/iw_recv.c
@@ -524,7 +524,7 @@ void rds_iw_attempt_ack(struct rds_iw_connection *ic)
 	}
 
 	/* Can we get a send credit? */
-	if (!rds_iw_send_grab_credits(ic, 1, &adv_credits, 0)) {
+	if (!rds_iw_send_grab_credits(ic, 1, &adv_credits, 0, RDS_MAX_ADV_CREDIT)) {
 		rds_iw_stats_inc(s_iw_tx_throttle);
 		clear_bit(IB_ACK_IN_FLIGHT, &ic->i_ack_flags);
 		return;
diff --git a/net/rds/iw_ring.c b/net/rds/iw_ring.c
index d422d4b5dee..da8e3b63f66 100644
--- a/net/rds/iw_ring.c
+++ b/net/rds/iw_ring.c
@@ -137,7 +137,7 @@ int rds_iw_ring_empty(struct rds_iw_work_ring *ring)
 
 int rds_iw_ring_low(struct rds_iw_work_ring *ring)
 {
-	return __rds_iw_ring_used(ring) <= (ring->w_nr >> 2);
+	return __rds_iw_ring_used(ring) <= (ring->w_nr >> 1);
 }
 
 
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 22dd38ffd60..44a6a0551f2 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -347,7 +347,7 @@ void rds_iw_send_cq_comp_handler(struct ib_cq *cq, void *context)
  * and using atomic_cmpxchg when updating the two counters.
  */
 int rds_iw_send_grab_credits(struct rds_iw_connection *ic,
-			     u32 wanted, u32 *adv_credits, int need_posted)
+			     u32 wanted, u32 *adv_credits, int need_posted, int max_posted)
 {
 	unsigned int avail, posted, got = 0, advertise;
 	long oldval, newval;
@@ -387,7 +387,7 @@ try_again:
 	 * available.
 	 */
 	if (posted && (got || need_posted)) {
-		advertise = min_t(unsigned int, posted, RDS_MAX_ADV_CREDIT);
+		advertise = min_t(unsigned int, posted, max_posted);
 		newval -= IB_SET_POST_CREDITS(advertise);
 	}
 
@@ -541,7 +541,7 @@ int rds_iw_xmit(struct rds_connection *conn, struct rds_message *rm,
 
 	credit_alloc = work_alloc;
 	if (ic->i_flowctl) {
-		credit_alloc = rds_iw_send_grab_credits(ic, work_alloc, &posted, 0);
+		credit_alloc = rds_iw_send_grab_credits(ic, work_alloc, &posted, 0, RDS_MAX_ADV_CREDIT);
 		adv_credits += posted;
 		if (credit_alloc < work_alloc) {
 			rds_iw_ring_unalloc(&ic->i_send_ring, work_alloc - credit_alloc);
@@ -549,7 +549,7 @@ int rds_iw_xmit(struct rds_connection *conn, struct rds_message *rm,
 			flow_controlled++;
 		}
 		if (work_alloc == 0) {
-			rds_iw_ring_unalloc(&ic->i_send_ring, work_alloc);
+			set_bit(RDS_LL_SEND_FULL, &conn->c_flags);
 			rds_iw_stats_inc(s_iw_tx_throttle);
 			ret = -ENOMEM;
 			goto out;
@@ -614,7 +614,7 @@ int rds_iw_xmit(struct rds_connection *conn, struct rds_message *rm,
 		/*
 		 * Update adv_credits since we reset the ACK_REQUIRED bit.
 		 */
-		rds_iw_send_grab_credits(ic, 0, &posted, 1);
+		rds_iw_send_grab_credits(ic, 0, &posted, 1, RDS_MAX_ADV_CREDIT - adv_credits);
 		adv_credits += posted;
 		BUG_ON(adv_credits > 255);
 	} else if (ic->i_rm != rm)
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index eaeeb91e111..8dc83d2caa5 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -150,12 +150,9 @@ static int rds_pin_pages(unsigned long user_addr, unsigned int nr_pages,
 {
 	int ret;
 
-	down_read(&current->mm->mmap_sem);
-	ret = get_user_pages(current, current->mm, user_addr,
-			     nr_pages, write, 0, pages, NULL);
-	up_read(&current->mm->mmap_sem);
+	ret = get_user_pages_fast(user_addr, nr_pages, write, pages);
 
-	if (0 <= ret && (unsigned) ret < nr_pages) {
+	if (ret >= 0 && ret < nr_pages) {
 		while (ret--)
 			put_page(pages[ret]);
 		ret = -EFAULT;
diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c
index 7b19024f970..7d0f901c93d 100644
--- a/net/rds/rdma_transport.c
+++ b/net/rds/rdma_transport.c
@@ -34,7 +34,7 @@
 
 #include "rdma_transport.h"
 
-static struct rdma_cm_id *rds_iw_listen_id;
+static struct rdma_cm_id *rds_rdma_listen_id;
 
 int rds_rdma_cm_event_handler(struct rdma_cm_id *cm_id,
 			      struct rdma_cm_event *event)
@@ -161,7 +161,7 @@ static int __init rds_rdma_listen_init(void)
 
 	rdsdebug("cm %p listening on port %u\n", cm_id, RDS_PORT);
 
-	rds_iw_listen_id = cm_id;
+	rds_rdma_listen_id = cm_id;
 	cm_id = NULL;
 out:
 	if (cm_id)
@@ -171,10 +171,10 @@ out:
 
 static void rds_rdma_listen_stop(void)
 {
-	if (rds_iw_listen_id) {
-		rdsdebug("cm %p\n", rds_iw_listen_id);
-		rdma_destroy_id(rds_iw_listen_id);
-		rds_iw_listen_id = NULL;
+	if (rds_rdma_listen_id) {
+		rdsdebug("cm %p\n", rds_rdma_listen_id);
+		rdma_destroy_id(rds_rdma_listen_id);
+		rds_rdma_listen_id = NULL;
 	}
 }
 
diff --git a/net/rds/rds.h b/net/rds/rds.h
index 71794449ca4..dbe11123678 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -132,7 +132,7 @@ struct rds_connection {
 #define RDS_FLAG_CONG_BITMAP	0x01
 #define RDS_FLAG_ACK_REQUIRED	0x02
 #define RDS_FLAG_RETRANSMITTED	0x04
-#define RDS_MAX_ADV_CREDIT	127
+#define RDS_MAX_ADV_CREDIT	255
 
 /*
  * Maximum space available for extension headers.
diff --git a/net/rds/send.c b/net/rds/send.c
index 104fe033203..a4a7f428cd7 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -854,11 +854,6 @@ int rds_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
 
 	rm->m_daddr = daddr;
 
-	/* Parse any control messages the user may have included. */
-	ret = rds_cmsg_send(rs, rm, msg, &allocated_mr);
-	if (ret)
-		goto out;
-
 	/* rds_conn_create has a spinlock that runs with IRQ off.
 	 * Caching the conn in the socket helps a lot. */
 	if (rs->rs_conn && rs->rs_conn->c_faddr == daddr)
@@ -874,6 +869,11 @@ int rds_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
 		rs->rs_conn = conn;
 	}
 
+	/* Parse any control messages the user may have included. */
+	ret = rds_cmsg_send(rs, rm, msg, &allocated_mr);
+	if (ret)
+		goto out;
+
 	if ((rm->m_rdma_cookie || rm->m_rdma_op)
 	 && conn->c_trans->xmit_rdma == NULL) {
 		if (printk_ratelimit())
diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig
index 7f807b30cfb..eaf76587645 100644
--- a/net/rfkill/Kconfig
+++ b/net/rfkill/Kconfig
@@ -10,22 +10,15 @@ menuconfig RFKILL
 	  To compile this driver as a module, choose M here: the
 	  module will be called rfkill.
 
-config RFKILL_INPUT
-	tristate "Input layer to RF switch connector"
-	depends on RFKILL && INPUT
-	help
-	  Say Y here if you want kernel automatically toggle state
-	  of RF switches on and off when user presses appropriate
-	  button or a key on the keyboard. Without this module you
-	  need a some kind of userspace application to control
-	  state of the switches.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rfkill-input.
-
 # LED trigger support
 config RFKILL_LEDS
 	bool
-	depends on RFKILL && LEDS_TRIGGERS
+	depends on RFKILL
+	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
 	default y
 
+config RFKILL_INPUT
+	bool "RF switch input support" if EMBEDDED
+	depends on RFKILL
+	depends on INPUT = y || RFKILL = INPUT
+	default y if !EMBEDDED
diff --git a/net/rfkill/Makefile b/net/rfkill/Makefile
index b38c430be05..66210535269 100644
--- a/net/rfkill/Makefile
+++ b/net/rfkill/Makefile
@@ -2,5 +2,6 @@
 # Makefile for the RF switch subsystem.
 #
 
-obj-$(CONFIG_RFKILL)			+= rfkill.o
-obj-$(CONFIG_RFKILL_INPUT)		+= rfkill-input.o
+rfkill-y			+= core.o
+rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
+obj-$(CONFIG_RFKILL)		+= rfkill.o
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
new file mode 100644
index 00000000000..4e68ab439d5
--- /dev/null
+++ b/net/rfkill/core.c
@@ -0,0 +1,1205 @@
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/capability.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rfkill.h>
+#include <linux/spinlock.h>
+#include <linux/miscdevice.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/fs.h>
+
+#include "rfkill.h"
+
+#define POLL_INTERVAL		(5 * HZ)
+
+#define RFKILL_BLOCK_HW		BIT(0)
+#define RFKILL_BLOCK_SW		BIT(1)
+#define RFKILL_BLOCK_SW_PREV	BIT(2)
+#define RFKILL_BLOCK_ANY	(RFKILL_BLOCK_HW |\
+				 RFKILL_BLOCK_SW |\
+				 RFKILL_BLOCK_SW_PREV)
+#define RFKILL_BLOCK_SW_SETCALL	BIT(31)
+
+struct rfkill {
+	spinlock_t		lock;
+
+	const char		*name;
+	enum rfkill_type	type;
+
+	unsigned long		state;
+
+	u32			idx;
+
+	bool			registered;
+	bool			suspended;
+	bool			persistent;
+
+	const struct rfkill_ops	*ops;
+	void			*data;
+
+#ifdef CONFIG_RFKILL_LEDS
+	struct led_trigger	led_trigger;
+	const char		*ledtrigname;
+#endif
+
+	struct device		dev;
+	struct list_head	node;
+
+	struct delayed_work	poll_work;
+	struct work_struct	uevent_work;
+	struct work_struct	sync_work;
+};
+#define to_rfkill(d)	container_of(d, struct rfkill, dev)
+
+struct rfkill_int_event {
+	struct list_head	list;
+	struct rfkill_event	ev;
+};
+
+struct rfkill_data {
+	struct list_head	list;
+	struct list_head	events;
+	struct mutex		mtx;
+	wait_queue_head_t	read_wait;
+	bool			input_handler;
+};
+
+
+MODULE_AUTHOR("Ivo van Doorn <IvDoorn@gmail.com>");
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_DESCRIPTION("RF switch support");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * The locking here should be made much smarter, we currently have
+ * a bit of a stupid situation because drivers might want to register
+ * the rfkill struct under their own lock, and take this lock during
+ * rfkill method calls -- which will cause an AB-BA deadlock situation.
+ *
+ * To fix that, we need to rework this code here to be mostly lock-free
+ * and only use the mutex for list manipulations, not to protect the
+ * various other global variables. Then we can avoid holding the mutex
+ * around driver operations, and all is happy.
+ */
+static LIST_HEAD(rfkill_list);	/* list of registered rf switches */
+static DEFINE_MUTEX(rfkill_global_mutex);
+static LIST_HEAD(rfkill_fds);	/* list of open fds of /dev/rfkill */
+
+static unsigned int rfkill_default_state = 1;
+module_param_named(default_state, rfkill_default_state, uint, 0444);
+MODULE_PARM_DESC(default_state,
+		 "Default initial state for all radio types, 0 = radio off");
+
+static struct {
+	bool cur, sav;
+} rfkill_global_states[NUM_RFKILL_TYPES];
+
+static bool rfkill_epo_lock_active;
+
+
+#ifdef CONFIG_RFKILL_LEDS
+static void rfkill_led_trigger_event(struct rfkill *rfkill)
+{
+	struct led_trigger *trigger;
+
+	if (!rfkill->registered)
+		return;
+
+	trigger = &rfkill->led_trigger;
+
+	if (rfkill->state & RFKILL_BLOCK_ANY)
+		led_trigger_event(trigger, LED_OFF);
+	else
+		led_trigger_event(trigger, LED_FULL);
+}
+
+static void rfkill_led_trigger_activate(struct led_classdev *led)
+{
+	struct rfkill *rfkill;
+
+	rfkill = container_of(led->trigger, struct rfkill, led_trigger);
+
+	rfkill_led_trigger_event(rfkill);
+}
+
+const char *rfkill_get_led_trigger_name(struct rfkill *rfkill)
+{
+	return rfkill->led_trigger.name;
+}
+EXPORT_SYMBOL(rfkill_get_led_trigger_name);
+
+void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
+{
+	BUG_ON(!rfkill);
+
+	rfkill->ledtrigname = name;
+}
+EXPORT_SYMBOL(rfkill_set_led_trigger_name);
+
+static int rfkill_led_trigger_register(struct rfkill *rfkill)
+{
+	rfkill->led_trigger.name = rfkill->ledtrigname
+					? : dev_name(&rfkill->dev);
+	rfkill->led_trigger.activate = rfkill_led_trigger_activate;
+	return led_trigger_register(&rfkill->led_trigger);
+}
+
+static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
+{
+	led_trigger_unregister(&rfkill->led_trigger);
+}
+#else
+static void rfkill_led_trigger_event(struct rfkill *rfkill)
+{
+}
+
+static inline int rfkill_led_trigger_register(struct rfkill *rfkill)
+{
+	return 0;
+}
+
+static inline void rfkill_led_trigger_unregister(struct rfkill *rfkill)
+{
+}
+#endif /* CONFIG_RFKILL_LEDS */
+
+static void rfkill_fill_event(struct rfkill_event *ev, struct rfkill *rfkill,
+			      enum rfkill_operation op)
+{
+	unsigned long flags;
+
+	ev->idx = rfkill->idx;
+	ev->type = rfkill->type;
+	ev->op = op;
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	ev->hard = !!(rfkill->state & RFKILL_BLOCK_HW);
+	ev->soft = !!(rfkill->state & (RFKILL_BLOCK_SW |
+					RFKILL_BLOCK_SW_PREV));
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+}
+
+static void rfkill_send_events(struct rfkill *rfkill, enum rfkill_operation op)
+{
+	struct rfkill_data *data;
+	struct rfkill_int_event *ev;
+
+	list_for_each_entry(data, &rfkill_fds, list) {
+		ev = kzalloc(sizeof(*ev), GFP_KERNEL);
+		if (!ev)
+			continue;
+		rfkill_fill_event(&ev->ev, rfkill, op);
+		mutex_lock(&data->mtx);
+		list_add_tail(&ev->list, &data->events);
+		mutex_unlock(&data->mtx);
+		wake_up_interruptible(&data->read_wait);
+	}
+}
+
+static void rfkill_event(struct rfkill *rfkill)
+{
+	if (!rfkill->registered || rfkill->suspended)
+		return;
+
+	kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
+
+	/* also send event to /dev/rfkill */
+	rfkill_send_events(rfkill, RFKILL_OP_CHANGE);
+}
+
+static bool __rfkill_set_hw_state(struct rfkill *rfkill,
+				  bool blocked, bool *change)
+{
+	unsigned long flags;
+	bool prev, any;
+
+	BUG_ON(!rfkill);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	prev = !!(rfkill->state & RFKILL_BLOCK_HW);
+	if (blocked)
+		rfkill->state |= RFKILL_BLOCK_HW;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_HW;
+	*change = prev != blocked;
+	any = rfkill->state & RFKILL_BLOCK_ANY;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	rfkill_led_trigger_event(rfkill);
+
+	return any;
+}
+
+/**
+ * rfkill_set_block - wrapper for set_block method
+ *
+ * @rfkill: the rfkill struct to use
+ * @blocked: the new software state
+ *
+ * Calls the set_block method (when applicable) and handles notifications
+ * etc. as well.
+ */
+static void rfkill_set_block(struct rfkill *rfkill, bool blocked)
+{
+	unsigned long flags;
+	int err;
+
+	/*
+	 * Some platforms (...!) generate input events which affect the
+	 * _hard_ kill state -- whenever something tries to change the
+	 * current software state query the hardware state too.
+	 */
+	if (rfkill->ops->query)
+		rfkill->ops->query(rfkill, rfkill->data);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	if (rfkill->state & RFKILL_BLOCK_SW)
+		rfkill->state |= RFKILL_BLOCK_SW_PREV;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_SW_PREV;
+
+	if (blocked)
+		rfkill->state |= RFKILL_BLOCK_SW;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_SW;
+
+	rfkill->state |= RFKILL_BLOCK_SW_SETCALL;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+		return;
+
+	err = rfkill->ops->set_block(rfkill->data, blocked);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	if (err) {
+		/*
+		 * Failed -- reset status to _prev, this may be different
+		 * from what set set _PREV to earlier in this function
+		 * if rfkill_set_sw_state was invoked.
+		 */
+		if (rfkill->state & RFKILL_BLOCK_SW_PREV)
+			rfkill->state |= RFKILL_BLOCK_SW;
+		else
+			rfkill->state &= ~RFKILL_BLOCK_SW;
+	}
+	rfkill->state &= ~RFKILL_BLOCK_SW_SETCALL;
+	rfkill->state &= ~RFKILL_BLOCK_SW_PREV;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	rfkill_led_trigger_event(rfkill);
+	rfkill_event(rfkill);
+}
+
+#ifdef CONFIG_RFKILL_INPUT
+static atomic_t rfkill_input_disabled = ATOMIC_INIT(0);
+
+/**
+ * __rfkill_switch_all - Toggle state of all switches of given type
+ * @type: type of interfaces to be affected
+ * @state: the new state
+ *
+ * This function sets the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone) or suspended.
+ *
+ * Caller must have acquired rfkill_global_mutex.
+ */
+static void __rfkill_switch_all(const enum rfkill_type type, bool blocked)
+{
+	struct rfkill *rfkill;
+
+	rfkill_global_states[type].cur = blocked;
+	list_for_each_entry(rfkill, &rfkill_list, node) {
+		if (rfkill->type != type)
+			continue;
+
+		rfkill_set_block(rfkill, blocked);
+	}
+}
+
+/**
+ * rfkill_switch_all - Toggle state of all switches of given type
+ * @type: type of interfaces to be affected
+ * @state: the new state
+ *
+ * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state).
+ * Please refer to __rfkill_switch_all() for details.
+ *
+ * Does nothing if the EPO lock is active.
+ */
+void rfkill_switch_all(enum rfkill_type type, bool blocked)
+{
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	if (!rfkill_epo_lock_active)
+		__rfkill_switch_all(type, blocked);
+
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_epo - emergency power off all transmitters
+ *
+ * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
+ * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex.
+ *
+ * The global state before the EPO is saved and can be restored later
+ * using rfkill_restore_states().
+ */
+void rfkill_epo(void)
+{
+	struct rfkill *rfkill;
+	int i;
+
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	rfkill_epo_lock_active = true;
+	list_for_each_entry(rfkill, &rfkill_list, node)
+		rfkill_set_block(rfkill, true);
+
+	for (i = 0; i < NUM_RFKILL_TYPES; i++) {
+		rfkill_global_states[i].sav = rfkill_global_states[i].cur;
+		rfkill_global_states[i].cur = true;
+	}
+
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_restore_states - restore global states
+ *
+ * Restore (and sync switches to) the global state from the
+ * states in rfkill_default_states.  This can undo the effects of
+ * a call to rfkill_epo().
+ */
+void rfkill_restore_states(void)
+{
+	int i;
+
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	rfkill_epo_lock_active = false;
+	for (i = 0; i < NUM_RFKILL_TYPES; i++)
+		__rfkill_switch_all(i, rfkill_global_states[i].sav);
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_remove_epo_lock - unlock state changes
+ *
+ * Used by rfkill-input manually unlock state changes, when
+ * the EPO switch is deactivated.
+ */
+void rfkill_remove_epo_lock(void)
+{
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_epo_lock_active = false;
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_is_epo_lock_active - returns true EPO is active
+ *
+ * Returns 0 (false) if there is NOT an active EPO contidion,
+ * and 1 (true) if there is an active EPO contition, which
+ * locks all radios in one of the BLOCKED states.
+ *
+ * Can be called in atomic context.
+ */
+bool rfkill_is_epo_lock_active(void)
+{
+	return rfkill_epo_lock_active;
+}
+
+/**
+ * rfkill_get_global_sw_state - returns global state for a type
+ * @type: the type to get the global state of
+ *
+ * Returns the current global state for a given wireless
+ * device type.
+ */
+bool rfkill_get_global_sw_state(const enum rfkill_type type)
+{
+	return rfkill_global_states[type].cur;
+}
+#endif
+
+
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	bool ret, change;
+
+	ret = __rfkill_set_hw_state(rfkill, blocked, &change);
+
+	if (!rfkill->registered)
+		return ret;
+
+	if (change)
+		schedule_work(&rfkill->uevent_work);
+
+	return ret;
+}
+EXPORT_SYMBOL(rfkill_set_hw_state);
+
+static void __rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	u32 bit = RFKILL_BLOCK_SW;
+
+	/* if in a ops->set_block right now, use other bit */
+	if (rfkill->state & RFKILL_BLOCK_SW_SETCALL)
+		bit = RFKILL_BLOCK_SW_PREV;
+
+	if (blocked)
+		rfkill->state |= bit;
+	else
+		rfkill->state &= ~bit;
+}
+
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	unsigned long flags;
+	bool prev, hwblock;
+
+	BUG_ON(!rfkill);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	prev = !!(rfkill->state & RFKILL_BLOCK_SW);
+	__rfkill_set_sw_state(rfkill, blocked);
+	hwblock = !!(rfkill->state & RFKILL_BLOCK_HW);
+	blocked = blocked || hwblock;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	if (!rfkill->registered) {
+		rfkill->persistent = true;
+	} else {
+		if (prev != blocked && !hwblock)
+			schedule_work(&rfkill->uevent_work);
+
+		rfkill_led_trigger_event(rfkill);
+	}
+
+	return blocked;
+}
+EXPORT_SYMBOL(rfkill_set_sw_state);
+
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+	unsigned long flags;
+	bool swprev, hwprev;
+
+	BUG_ON(!rfkill);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+
+	/*
+	 * No need to care about prev/setblock ... this is for uevent only
+	 * and that will get triggered by rfkill_set_block anyway.
+	 */
+	swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
+	hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
+	__rfkill_set_sw_state(rfkill, sw);
+
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	if (!rfkill->registered) {
+		rfkill->persistent = true;
+	} else {
+		if (swprev != sw || hwprev != hw)
+			schedule_work(&rfkill->uevent_work);
+
+		rfkill_led_trigger_event(rfkill);
+	}
+}
+EXPORT_SYMBOL(rfkill_set_states);
+
+static ssize_t rfkill_name_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%s\n", rfkill->name);
+}
+
+static const char *rfkill_get_type_str(enum rfkill_type type)
+{
+	switch (type) {
+	case RFKILL_TYPE_WLAN:
+		return "wlan";
+	case RFKILL_TYPE_BLUETOOTH:
+		return "bluetooth";
+	case RFKILL_TYPE_UWB:
+		return "ultrawideband";
+	case RFKILL_TYPE_WIMAX:
+		return "wimax";
+	case RFKILL_TYPE_WWAN:
+		return "wwan";
+	default:
+		BUG();
+	}
+
+	BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_WWAN + 1);
+}
+
+static ssize_t rfkill_type_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type));
+}
+
+static ssize_t rfkill_idx_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%d\n", rfkill->idx);
+}
+
+static u8 user_state_from_blocked(unsigned long state)
+{
+	if (state & RFKILL_BLOCK_HW)
+		return RFKILL_USER_STATE_HARD_BLOCKED;
+	if (state & RFKILL_BLOCK_SW)
+		return RFKILL_USER_STATE_SOFT_BLOCKED;
+
+	return RFKILL_USER_STATE_UNBLOCKED;
+}
+
+static ssize_t rfkill_state_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+	unsigned long flags;
+	u32 state;
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	state = rfkill->state;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	return sprintf(buf, "%d\n", user_state_from_blocked(state));
+}
+
+static ssize_t rfkill_state_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	/*
+	 * The intention was that userspace can only take control over
+	 * a given device when/if rfkill-input doesn't control it due
+	 * to user_claim. Since user_claim is currently unsupported,
+	 * we never support changing the state from userspace -- this
+	 * can be implemented again later.
+	 */
+
+	return -EPERM;
+}
+
+static ssize_t rfkill_claim_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	return sprintf(buf, "%d\n", 0);
+}
+
+static ssize_t rfkill_claim_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	return -EOPNOTSUPP;
+}
+
+static struct device_attribute rfkill_dev_attrs[] = {
+	__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
+	__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
+	__ATTR(index, S_IRUGO, rfkill_idx_show, NULL),
+	__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
+	__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
+	__ATTR_NULL
+};
+
+static void rfkill_release(struct device *dev)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	kfree(rfkill);
+}
+
+static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+	unsigned long flags;
+	u32 state;
+	int error;
+
+	error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name);
+	if (error)
+		return error;
+	error = add_uevent_var(env, "RFKILL_TYPE=%s",
+			       rfkill_get_type_str(rfkill->type));
+	if (error)
+		return error;
+	spin_lock_irqsave(&rfkill->lock, flags);
+	state = rfkill->state;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+	error = add_uevent_var(env, "RFKILL_STATE=%d",
+			       user_state_from_blocked(state));
+	return error;
+}
+
+void rfkill_pause_polling(struct rfkill *rfkill)
+{
+	BUG_ON(!rfkill);
+
+	if (!rfkill->ops->poll)
+		return;
+
+	cancel_delayed_work_sync(&rfkill->poll_work);
+}
+EXPORT_SYMBOL(rfkill_pause_polling);
+
+void rfkill_resume_polling(struct rfkill *rfkill)
+{
+	BUG_ON(!rfkill);
+
+	if (!rfkill->ops->poll)
+		return;
+
+	schedule_work(&rfkill->poll_work.work);
+}
+EXPORT_SYMBOL(rfkill_resume_polling);
+
+static int rfkill_suspend(struct device *dev, pm_message_t state)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	rfkill_pause_polling(rfkill);
+
+	rfkill->suspended = true;
+
+	return 0;
+}
+
+static int rfkill_resume(struct device *dev)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+	bool cur;
+
+	cur = !!(rfkill->state & RFKILL_BLOCK_SW);
+	rfkill_set_block(rfkill, cur);
+
+	rfkill->suspended = false;
+
+	rfkill_resume_polling(rfkill);
+
+	return 0;
+}
+
+static struct class rfkill_class = {
+	.name		= "rfkill",
+	.dev_release	= rfkill_release,
+	.dev_attrs	= rfkill_dev_attrs,
+	.dev_uevent	= rfkill_dev_uevent,
+	.suspend	= rfkill_suspend,
+	.resume		= rfkill_resume,
+};
+
+bool rfkill_blocked(struct rfkill *rfkill)
+{
+	unsigned long flags;
+	u32 state;
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	state = rfkill->state;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	return !!(state & RFKILL_BLOCK_ANY);
+}
+EXPORT_SYMBOL(rfkill_blocked);
+
+
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data)
+{
+	struct rfkill *rfkill;
+	struct device *dev;
+
+	if (WARN_ON(!ops))
+		return NULL;
+
+	if (WARN_ON(!ops->set_block))
+		return NULL;
+
+	if (WARN_ON(!name))
+		return NULL;
+
+	if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES))
+		return NULL;
+
+	rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL);
+	if (!rfkill)
+		return NULL;
+
+	spin_lock_init(&rfkill->lock);
+	INIT_LIST_HEAD(&rfkill->node);
+	rfkill->type = type;
+	rfkill->name = name;
+	rfkill->ops = ops;
+	rfkill->data = ops_data;
+
+	dev = &rfkill->dev;
+	dev->class = &rfkill_class;
+	dev->parent = parent;
+	device_initialize(dev);
+
+	return rfkill;
+}
+EXPORT_SYMBOL(rfkill_alloc);
+
+static void rfkill_poll(struct work_struct *work)
+{
+	struct rfkill *rfkill;
+
+	rfkill = container_of(work, struct rfkill, poll_work.work);
+
+	/*
+	 * Poll hardware state -- driver will use one of the
+	 * rfkill_set{,_hw,_sw}_state functions and use its
+	 * return value to update the current status.
+	 */
+	rfkill->ops->poll(rfkill, rfkill->data);
+
+	schedule_delayed_work(&rfkill->poll_work,
+		round_jiffies_relative(POLL_INTERVAL));
+}
+
+static void rfkill_uevent_work(struct work_struct *work)
+{
+	struct rfkill *rfkill;
+
+	rfkill = container_of(work, struct rfkill, uevent_work);
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_event(rfkill);
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+static void rfkill_sync_work(struct work_struct *work)
+{
+	struct rfkill *rfkill;
+	bool cur;
+
+	rfkill = container_of(work, struct rfkill, sync_work);
+
+	mutex_lock(&rfkill_global_mutex);
+	cur = rfkill_global_states[rfkill->type].cur;
+	rfkill_set_block(rfkill, cur);
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	static unsigned long rfkill_no;
+	struct device *dev = &rfkill->dev;
+	int error;
+
+	BUG_ON(!rfkill);
+
+	mutex_lock(&rfkill_global_mutex);
+
+	if (rfkill->registered) {
+		error = -EALREADY;
+		goto unlock;
+	}
+
+	rfkill->idx = rfkill_no;
+	dev_set_name(dev, "rfkill%lu", rfkill_no);
+	rfkill_no++;
+
+	list_add_tail(&rfkill->node, &rfkill_list);
+
+	error = device_add(dev);
+	if (error)
+		goto remove;
+
+	error = rfkill_led_trigger_register(rfkill);
+	if (error)
+		goto devdel;
+
+	rfkill->registered = true;
+
+	INIT_DELAYED_WORK(&rfkill->poll_work, rfkill_poll);
+	INIT_WORK(&rfkill->uevent_work, rfkill_uevent_work);
+	INIT_WORK(&rfkill->sync_work, rfkill_sync_work);
+
+	if (rfkill->ops->poll)
+		schedule_delayed_work(&rfkill->poll_work,
+			round_jiffies_relative(POLL_INTERVAL));
+
+	if (!rfkill->persistent || rfkill_epo_lock_active) {
+		schedule_work(&rfkill->sync_work);
+	} else {
+#ifdef CONFIG_RFKILL_INPUT
+		bool soft_blocked = !!(rfkill->state & RFKILL_BLOCK_SW);
+
+		if (!atomic_read(&rfkill_input_disabled))
+			__rfkill_switch_all(rfkill->type, soft_blocked);
+#endif
+	}
+
+	rfkill_send_events(rfkill, RFKILL_OP_ADD);
+
+	mutex_unlock(&rfkill_global_mutex);
+	return 0;
+
+ devdel:
+	device_del(&rfkill->dev);
+ remove:
+	list_del_init(&rfkill->node);
+ unlock:
+	mutex_unlock(&rfkill_global_mutex);
+	return error;
+}
+EXPORT_SYMBOL(rfkill_register);
+
+void rfkill_unregister(struct rfkill *rfkill)
+{
+	BUG_ON(!rfkill);
+
+	if (rfkill->ops->poll)
+		cancel_delayed_work_sync(&rfkill->poll_work);
+
+	cancel_work_sync(&rfkill->uevent_work);
+	cancel_work_sync(&rfkill->sync_work);
+
+	rfkill->registered = false;
+
+	device_del(&rfkill->dev);
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_send_events(rfkill, RFKILL_OP_DEL);
+	list_del_init(&rfkill->node);
+	mutex_unlock(&rfkill_global_mutex);
+
+	rfkill_led_trigger_unregister(rfkill);
+}
+EXPORT_SYMBOL(rfkill_unregister);
+
+void rfkill_destroy(struct rfkill *rfkill)
+{
+	if (rfkill)
+		put_device(&rfkill->dev);
+}
+EXPORT_SYMBOL(rfkill_destroy);
+
+static int rfkill_fop_open(struct inode *inode, struct file *file)
+{
+	struct rfkill_data *data;
+	struct rfkill *rfkill;
+	struct rfkill_int_event *ev, *tmp;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&data->events);
+	mutex_init(&data->mtx);
+	init_waitqueue_head(&data->read_wait);
+
+	mutex_lock(&rfkill_global_mutex);
+	mutex_lock(&data->mtx);
+	/*
+	 * start getting events from elsewhere but hold mtx to get
+	 * startup events added first
+	 */
+	list_add(&data->list, &rfkill_fds);
+
+	list_for_each_entry(rfkill, &rfkill_list, node) {
+		ev = kzalloc(sizeof(*ev), GFP_KERNEL);
+		if (!ev)
+			goto free;
+		rfkill_fill_event(&ev->ev, rfkill, RFKILL_OP_ADD);
+		list_add_tail(&ev->list, &data->events);
+	}
+	mutex_unlock(&data->mtx);
+	mutex_unlock(&rfkill_global_mutex);
+
+	file->private_data = data;
+
+	return nonseekable_open(inode, file);
+
+ free:
+	mutex_unlock(&data->mtx);
+	mutex_unlock(&rfkill_global_mutex);
+	mutex_destroy(&data->mtx);
+	list_for_each_entry_safe(ev, tmp, &data->events, list)
+		kfree(ev);
+	kfree(data);
+	return -ENOMEM;
+}
+
+static unsigned int rfkill_fop_poll(struct file *file, poll_table *wait)
+{
+	struct rfkill_data *data = file->private_data;
+	unsigned int res = POLLOUT | POLLWRNORM;
+
+	poll_wait(file, &data->read_wait, wait);
+
+	mutex_lock(&data->mtx);
+	if (!list_empty(&data->events))
+		res = POLLIN | POLLRDNORM;
+	mutex_unlock(&data->mtx);
+
+	return res;
+}
+
+static bool rfkill_readable(struct rfkill_data *data)
+{
+	bool r;
+
+	mutex_lock(&data->mtx);
+	r = !list_empty(&data->events);
+	mutex_unlock(&data->mtx);
+
+	return r;
+}
+
+static ssize_t rfkill_fop_read(struct file *file, char __user *buf,
+			       size_t count, loff_t *pos)
+{
+	struct rfkill_data *data = file->private_data;
+	struct rfkill_int_event *ev;
+	unsigned long sz;
+	int ret;
+
+	mutex_lock(&data->mtx);
+
+	while (list_empty(&data->events)) {
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			goto out;
+		}
+		mutex_unlock(&data->mtx);
+		ret = wait_event_interruptible(data->read_wait,
+					       rfkill_readable(data));
+		mutex_lock(&data->mtx);
+
+		if (ret)
+			goto out;
+	}
+
+	ev = list_first_entry(&data->events, struct rfkill_int_event,
+				list);
+
+	sz = min_t(unsigned long, sizeof(ev->ev), count);
+	ret = sz;
+	if (copy_to_user(buf, &ev->ev, sz))
+		ret = -EFAULT;
+
+	list_del(&ev->list);
+	kfree(ev);
+ out:
+	mutex_unlock(&data->mtx);
+	return ret;
+}
+
+static ssize_t rfkill_fop_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *pos)
+{
+	struct rfkill *rfkill;
+	struct rfkill_event ev;
+
+	/* we don't need the 'hard' variable but accept it */
+	if (count < sizeof(ev) - 1)
+		return -EINVAL;
+
+	if (copy_from_user(&ev, buf, sizeof(ev) - 1))
+		return -EFAULT;
+
+	if (ev.op != RFKILL_OP_CHANGE && ev.op != RFKILL_OP_CHANGE_ALL)
+		return -EINVAL;
+
+	if (ev.type >= NUM_RFKILL_TYPES)
+		return -EINVAL;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	if (ev.op == RFKILL_OP_CHANGE_ALL) {
+		if (ev.type == RFKILL_TYPE_ALL) {
+			enum rfkill_type i;
+			for (i = 0; i < NUM_RFKILL_TYPES; i++)
+				rfkill_global_states[i].cur = ev.soft;
+		} else {
+			rfkill_global_states[ev.type].cur = ev.soft;
+		}
+	}
+
+	list_for_each_entry(rfkill, &rfkill_list, node) {
+		if (rfkill->idx != ev.idx && ev.op != RFKILL_OP_CHANGE_ALL)
+			continue;
+
+		if (rfkill->type != ev.type && ev.type != RFKILL_TYPE_ALL)
+			continue;
+
+		rfkill_set_block(rfkill, ev.soft);
+	}
+	mutex_unlock(&rfkill_global_mutex);
+
+	return count;
+}
+
+static int rfkill_fop_release(struct inode *inode, struct file *file)
+{
+	struct rfkill_data *data = file->private_data;
+	struct rfkill_int_event *ev, *tmp;
+
+	mutex_lock(&rfkill_global_mutex);
+	list_del(&data->list);
+	mutex_unlock(&rfkill_global_mutex);
+
+	mutex_destroy(&data->mtx);
+	list_for_each_entry_safe(ev, tmp, &data->events, list)
+		kfree(ev);
+
+#ifdef CONFIG_RFKILL_INPUT
+	if (data->input_handler)
+		if (atomic_dec_return(&rfkill_input_disabled) == 0)
+			printk(KERN_DEBUG "rfkill: input handler enabled\n");
+#endif
+
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_RFKILL_INPUT
+static long rfkill_fop_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct rfkill_data *data = file->private_data;
+
+	if (_IOC_TYPE(cmd) != RFKILL_IOC_MAGIC)
+		return -ENOSYS;
+
+	if (_IOC_NR(cmd) != RFKILL_IOC_NOINPUT)
+		return -ENOSYS;
+
+	mutex_lock(&data->mtx);
+
+	if (!data->input_handler) {
+		if (atomic_inc_return(&rfkill_input_disabled) == 1)
+			printk(KERN_DEBUG "rfkill: input handler disabled\n");
+		data->input_handler = true;
+	}
+
+	mutex_unlock(&data->mtx);
+
+	return 0;
+}
+#endif
+
+static const struct file_operations rfkill_fops = {
+	.open		= rfkill_fop_open,
+	.read		= rfkill_fop_read,
+	.write		= rfkill_fop_write,
+	.poll		= rfkill_fop_poll,
+	.release	= rfkill_fop_release,
+#ifdef CONFIG_RFKILL_INPUT
+	.unlocked_ioctl	= rfkill_fop_ioctl,
+	.compat_ioctl	= rfkill_fop_ioctl,
+#endif
+};
+
+static struct miscdevice rfkill_miscdev = {
+	.name	= "rfkill",
+	.fops	= &rfkill_fops,
+	.minor	= MISC_DYNAMIC_MINOR,
+};
+
+static int __init rfkill_init(void)
+{
+	int error;
+	int i;
+
+	for (i = 0; i < NUM_RFKILL_TYPES; i++)
+		rfkill_global_states[i].cur = !rfkill_default_state;
+
+	error = class_register(&rfkill_class);
+	if (error)
+		goto out;
+
+	error = misc_register(&rfkill_miscdev);
+	if (error) {
+		class_unregister(&rfkill_class);
+		goto out;
+	}
+
+#ifdef CONFIG_RFKILL_INPUT
+	error = rfkill_handler_init();
+	if (error) {
+		misc_deregister(&rfkill_miscdev);
+		class_unregister(&rfkill_class);
+		goto out;
+	}
+#endif
+
+ out:
+	return error;
+}
+subsys_initcall(rfkill_init);
+
+static void __exit rfkill_exit(void)
+{
+#ifdef CONFIG_RFKILL_INPUT
+	rfkill_handler_exit();
+#endif
+	misc_deregister(&rfkill_miscdev);
+	class_unregister(&rfkill_class);
+}
+module_exit(rfkill_exit);
diff --git a/net/rfkill/input.c b/net/rfkill/input.c
new file mode 100644
index 00000000000..a7295ad5f9c
--- /dev/null
+++ b/net/rfkill/input.c
@@ -0,0 +1,342 @@
+/*
+ * Input layer to RF Kill interface connector
+ *
+ * Copyright (c) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * If you ever run into a situation in which you have a SW_ type rfkill
+ * input device, then you can revive code that was removed in the patch
+ * "rfkill-input: remove unused code".
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/init.h>
+#include <linux/rfkill.h>
+#include <linux/sched.h>
+
+#include "rfkill.h"
+
+enum rfkill_input_master_mode {
+	RFKILL_INPUT_MASTER_UNLOCK = 0,
+	RFKILL_INPUT_MASTER_RESTORE = 1,
+	RFKILL_INPUT_MASTER_UNBLOCKALL = 2,
+	NUM_RFKILL_INPUT_MASTER_MODES
+};
+
+/* Delay (in ms) between consecutive switch ops */
+#define RFKILL_OPS_DELAY 200
+
+static enum rfkill_input_master_mode rfkill_master_switch_mode =
+					RFKILL_INPUT_MASTER_UNBLOCKALL;
+module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0);
+MODULE_PARM_DESC(master_switch_mode,
+	"SW_RFKILL_ALL ON should: 0=do nothing (only unlock); 1=restore; 2=unblock all");
+
+static spinlock_t rfkill_op_lock;
+static bool rfkill_op_pending;
+static unsigned long rfkill_sw_pending[BITS_TO_LONGS(NUM_RFKILL_TYPES)];
+static unsigned long rfkill_sw_state[BITS_TO_LONGS(NUM_RFKILL_TYPES)];
+
+enum rfkill_sched_op {
+	RFKILL_GLOBAL_OP_EPO = 0,
+	RFKILL_GLOBAL_OP_RESTORE,
+	RFKILL_GLOBAL_OP_UNLOCK,
+	RFKILL_GLOBAL_OP_UNBLOCK,
+};
+
+static enum rfkill_sched_op rfkill_master_switch_op;
+static enum rfkill_sched_op rfkill_op;
+
+static void __rfkill_handle_global_op(enum rfkill_sched_op op)
+{
+	unsigned int i;
+
+	switch (op) {
+	case RFKILL_GLOBAL_OP_EPO:
+		rfkill_epo();
+		break;
+	case RFKILL_GLOBAL_OP_RESTORE:
+		rfkill_restore_states();
+		break;
+	case RFKILL_GLOBAL_OP_UNLOCK:
+		rfkill_remove_epo_lock();
+		break;
+	case RFKILL_GLOBAL_OP_UNBLOCK:
+		rfkill_remove_epo_lock();
+		for (i = 0; i < NUM_RFKILL_TYPES; i++)
+			rfkill_switch_all(i, false);
+		break;
+	default:
+		/* memory corruption or bug, fail safely */
+		rfkill_epo();
+		WARN(1, "Unknown requested operation %d! "
+			"rfkill Emergency Power Off activated\n",
+			op);
+	}
+}
+
+static void __rfkill_handle_normal_op(const enum rfkill_type type,
+				      const bool complement)
+{
+	bool blocked;
+
+	blocked = rfkill_get_global_sw_state(type);
+	if (complement)
+		blocked = !blocked;
+
+	rfkill_switch_all(type, blocked);
+}
+
+static void rfkill_op_handler(struct work_struct *work)
+{
+	unsigned int i;
+	bool c;
+
+	spin_lock_irq(&rfkill_op_lock);
+	do {
+		if (rfkill_op_pending) {
+			enum rfkill_sched_op op = rfkill_op;
+			rfkill_op_pending = false;
+			memset(rfkill_sw_pending, 0,
+				sizeof(rfkill_sw_pending));
+			spin_unlock_irq(&rfkill_op_lock);
+
+			__rfkill_handle_global_op(op);
+
+			spin_lock_irq(&rfkill_op_lock);
+
+			/*
+			 * handle global ops first -- during unlocked period
+			 * we might have gotten a new global op.
+			 */
+			if (rfkill_op_pending)
+				continue;
+		}
+
+		if (rfkill_is_epo_lock_active())
+			continue;
+
+		for (i = 0; i < NUM_RFKILL_TYPES; i++) {
+			if (__test_and_clear_bit(i, rfkill_sw_pending)) {
+				c = __test_and_clear_bit(i, rfkill_sw_state);
+				spin_unlock_irq(&rfkill_op_lock);
+
+				__rfkill_handle_normal_op(i, c);
+
+				spin_lock_irq(&rfkill_op_lock);
+			}
+		}
+	} while (rfkill_op_pending);
+	spin_unlock_irq(&rfkill_op_lock);
+}
+
+static DECLARE_DELAYED_WORK(rfkill_op_work, rfkill_op_handler);
+static unsigned long rfkill_last_scheduled;
+
+static unsigned long rfkill_ratelimit(const unsigned long last)
+{
+	const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY);
+	return (time_after(jiffies, last + delay)) ? 0 : delay;
+}
+
+static void rfkill_schedule_ratelimited(void)
+{
+	if (delayed_work_pending(&rfkill_op_work))
+		return;
+	schedule_delayed_work(&rfkill_op_work,
+			      rfkill_ratelimit(rfkill_last_scheduled));
+	rfkill_last_scheduled = jiffies;
+}
+
+static void rfkill_schedule_global_op(enum rfkill_sched_op op)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rfkill_op_lock, flags);
+	rfkill_op = op;
+	rfkill_op_pending = true;
+	if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) {
+		/* bypass the limiter for EPO */
+		cancel_delayed_work(&rfkill_op_work);
+		schedule_delayed_work(&rfkill_op_work, 0);
+		rfkill_last_scheduled = jiffies;
+	} else
+		rfkill_schedule_ratelimited();
+	spin_unlock_irqrestore(&rfkill_op_lock, flags);
+}
+
+static void rfkill_schedule_toggle(enum rfkill_type type)
+{
+	unsigned long flags;
+
+	if (rfkill_is_epo_lock_active())
+		return;
+
+	spin_lock_irqsave(&rfkill_op_lock, flags);
+	if (!rfkill_op_pending) {
+		__set_bit(type, rfkill_sw_pending);
+		__change_bit(type, rfkill_sw_state);
+		rfkill_schedule_ratelimited();
+	}
+	spin_unlock_irqrestore(&rfkill_op_lock, flags);
+}
+
+static void rfkill_schedule_evsw_rfkillall(int state)
+{
+	if (state)
+		rfkill_schedule_global_op(rfkill_master_switch_op);
+	else
+		rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
+}
+
+static void rfkill_event(struct input_handle *handle, unsigned int type,
+			unsigned int code, int data)
+{
+	if (type == EV_KEY && data == 1) {
+		switch (code) {
+		case KEY_WLAN:
+			rfkill_schedule_toggle(RFKILL_TYPE_WLAN);
+			break;
+		case KEY_BLUETOOTH:
+			rfkill_schedule_toggle(RFKILL_TYPE_BLUETOOTH);
+			break;
+		case KEY_UWB:
+			rfkill_schedule_toggle(RFKILL_TYPE_UWB);
+			break;
+		case KEY_WIMAX:
+			rfkill_schedule_toggle(RFKILL_TYPE_WIMAX);
+			break;
+		}
+	} else if (type == EV_SW && code == SW_RFKILL_ALL)
+		rfkill_schedule_evsw_rfkillall(data);
+}
+
+static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
+			  const struct input_device_id *id)
+{
+	struct input_handle *handle;
+	int error;
+
+	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
+	if (!handle)
+		return -ENOMEM;
+
+	handle->dev = dev;
+	handle->handler = handler;
+	handle->name = "rfkill";
+
+	/* causes rfkill_start() to be called */
+	error = input_register_handle(handle);
+	if (error)
+		goto err_free_handle;
+
+	error = input_open_device(handle);
+	if (error)
+		goto err_unregister_handle;
+
+	return 0;
+
+ err_unregister_handle:
+	input_unregister_handle(handle);
+ err_free_handle:
+	kfree(handle);
+	return error;
+}
+
+static void rfkill_start(struct input_handle *handle)
+{
+	/*
+	 * Take event_lock to guard against configuration changes, we
+	 * should be able to deal with concurrency with rfkill_event()
+	 * just fine (which event_lock will also avoid).
+	 */
+	spin_lock_irq(&handle->dev->event_lock);
+
+	if (test_bit(EV_SW, handle->dev->evbit) &&
+	    test_bit(SW_RFKILL_ALL, handle->dev->swbit))
+		rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
+							handle->dev->sw));
+
+	spin_unlock_irq(&handle->dev->event_lock);
+}
+
+static void rfkill_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+	kfree(handle);
+}
+
+static const struct input_device_id rfkill_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
+		.evbit = { BIT(EV_SW) },
+		.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
+	},
+	{ }
+};
+
+static struct input_handler rfkill_handler = {
+	.name =	"rfkill",
+	.event = rfkill_event,
+	.connect = rfkill_connect,
+	.start = rfkill_start,
+	.disconnect = rfkill_disconnect,
+	.id_table = rfkill_ids,
+};
+
+int __init rfkill_handler_init(void)
+{
+	switch (rfkill_master_switch_mode) {
+	case RFKILL_INPUT_MASTER_UNBLOCKALL:
+		rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNBLOCK;
+		break;
+	case RFKILL_INPUT_MASTER_RESTORE:
+		rfkill_master_switch_op = RFKILL_GLOBAL_OP_RESTORE;
+		break;
+	case RFKILL_INPUT_MASTER_UNLOCK:
+		rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNLOCK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_init(&rfkill_op_lock);
+
+	/* Avoid delay at first schedule */
+	rfkill_last_scheduled =
+			jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1;
+	return input_register_handler(&rfkill_handler);
+}
+
+void __exit rfkill_handler_exit(void)
+{
+	input_unregister_handler(&rfkill_handler);
+	cancel_delayed_work_sync(&rfkill_op_work);
+}
diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c
deleted file mode 100644
index 84efde97c5a..00000000000
--- a/net/rfkill/rfkill-input.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * Input layer to RF Kill interface connector
- *
- * Copyright (c) 2007 Dmitry Torokhov
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/init.h>
-#include <linux/rfkill.h>
-#include <linux/sched.h>
-
-#include "rfkill-input.h"
-
-MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
-MODULE_DESCRIPTION("Input layer to RF switch connector");
-MODULE_LICENSE("GPL");
-
-enum rfkill_input_master_mode {
-	RFKILL_INPUT_MASTER_DONOTHING = 0,
-	RFKILL_INPUT_MASTER_RESTORE = 1,
-	RFKILL_INPUT_MASTER_UNBLOCKALL = 2,
-	RFKILL_INPUT_MASTER_MAX,	/* marker */
-};
-
-/* Delay (in ms) between consecutive switch ops */
-#define RFKILL_OPS_DELAY 200
-
-static enum rfkill_input_master_mode rfkill_master_switch_mode =
-					RFKILL_INPUT_MASTER_UNBLOCKALL;
-module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0);
-MODULE_PARM_DESC(master_switch_mode,
-	"SW_RFKILL_ALL ON should: 0=do nothing; 1=restore; 2=unblock all");
-
-enum rfkill_global_sched_op {
-	RFKILL_GLOBAL_OP_EPO = 0,
-	RFKILL_GLOBAL_OP_RESTORE,
-	RFKILL_GLOBAL_OP_UNLOCK,
-	RFKILL_GLOBAL_OP_UNBLOCK,
-};
-
-/*
- * Currently, the code marked with RFKILL_NEED_SWSET is inactive.
- * If handling of EV_SW SW_WLAN/WWAN/BLUETOOTH/etc is needed in the
- * future, when such events are added, that code will be necessary.
- */
-
-struct rfkill_task {
-	struct delayed_work dwork;
-
-	/* ensures that task is serialized */
-	struct mutex mutex;
-
-	/* protects everything below */
-	spinlock_t lock;
-
-	/* pending regular switch operations (1=pending) */
-	unsigned long sw_pending[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-#ifdef RFKILL_NEED_SWSET
-	/* set operation pending (1=pending) */
-	unsigned long sw_setpending[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-	/* desired state for pending set operation (1=unblock) */
-	unsigned long sw_newstate[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-#endif
-
-	/* should the state be complemented (1=yes) */
-	unsigned long sw_togglestate[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-	bool global_op_pending;
-	enum rfkill_global_sched_op op;
-
-	/* last time it was scheduled */
-	unsigned long last_scheduled;
-};
-
-static void __rfkill_handle_global_op(enum rfkill_global_sched_op op)
-{
-	unsigned int i;
-
-	switch (op) {
-	case RFKILL_GLOBAL_OP_EPO:
-		rfkill_epo();
-		break;
-	case RFKILL_GLOBAL_OP_RESTORE:
-		rfkill_restore_states();
-		break;
-	case RFKILL_GLOBAL_OP_UNLOCK:
-		rfkill_remove_epo_lock();
-		break;
-	case RFKILL_GLOBAL_OP_UNBLOCK:
-		rfkill_remove_epo_lock();
-		for (i = 0; i < RFKILL_TYPE_MAX; i++)
-			rfkill_switch_all(i, RFKILL_STATE_UNBLOCKED);
-		break;
-	default:
-		/* memory corruption or bug, fail safely */
-		rfkill_epo();
-		WARN(1, "Unknown requested operation %d! "
-			"rfkill Emergency Power Off activated\n",
-			op);
-	}
-}
-
-#ifdef RFKILL_NEED_SWSET
-static void __rfkill_handle_normal_op(const enum rfkill_type type,
-			const bool sp, const bool s, const bool c)
-{
-	enum rfkill_state state;
-
-	if (sp)
-		state = (s) ? RFKILL_STATE_UNBLOCKED :
-			      RFKILL_STATE_SOFT_BLOCKED;
-	else
-		state = rfkill_get_global_state(type);
-
-	if (c)
-		state = rfkill_state_complement(state);
-
-	rfkill_switch_all(type, state);
-}
-#else
-static void __rfkill_handle_normal_op(const enum rfkill_type type,
-			const bool c)
-{
-	enum rfkill_state state;
-
-	state = rfkill_get_global_state(type);
-	if (c)
-		state = rfkill_state_complement(state);
-
-	rfkill_switch_all(type, state);
-}
-#endif
-
-static void rfkill_task_handler(struct work_struct *work)
-{
-	struct rfkill_task *task = container_of(work,
-					struct rfkill_task, dwork.work);
-	bool doit = true;
-
-	mutex_lock(&task->mutex);
-
-	spin_lock_irq(&task->lock);
-	while (doit) {
-		if (task->global_op_pending) {
-			enum rfkill_global_sched_op op = task->op;
-			task->global_op_pending = false;
-			memset(task->sw_pending, 0, sizeof(task->sw_pending));
-			spin_unlock_irq(&task->lock);
-
-			__rfkill_handle_global_op(op);
-
-			/* make sure we do at least one pass with
-			 * !task->global_op_pending */
-			spin_lock_irq(&task->lock);
-			continue;
-		} else if (!rfkill_is_epo_lock_active()) {
-			unsigned int i = 0;
-
-			while (!task->global_op_pending &&
-						i < RFKILL_TYPE_MAX) {
-				if (test_and_clear_bit(i, task->sw_pending)) {
-					bool c;
-#ifdef RFKILL_NEED_SWSET
-					bool sp, s;
-					sp = test_and_clear_bit(i,
-							task->sw_setpending);
-					s = test_bit(i, task->sw_newstate);
-#endif
-					c = test_and_clear_bit(i,
-							task->sw_togglestate);
-					spin_unlock_irq(&task->lock);
-
-#ifdef RFKILL_NEED_SWSET
-					__rfkill_handle_normal_op(i, sp, s, c);
-#else
-					__rfkill_handle_normal_op(i, c);
-#endif
-
-					spin_lock_irq(&task->lock);
-				}
-				i++;
-			}
-		}
-		doit = task->global_op_pending;
-	}
-	spin_unlock_irq(&task->lock);
-
-	mutex_unlock(&task->mutex);
-}
-
-static struct rfkill_task rfkill_task = {
-	.dwork = __DELAYED_WORK_INITIALIZER(rfkill_task.dwork,
-				rfkill_task_handler),
-	.mutex = __MUTEX_INITIALIZER(rfkill_task.mutex),
-	.lock = __SPIN_LOCK_UNLOCKED(rfkill_task.lock),
-};
-
-static unsigned long rfkill_ratelimit(const unsigned long last)
-{
-	const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY);
-	return (time_after(jiffies, last + delay)) ? 0 : delay;
-}
-
-static void rfkill_schedule_ratelimited(void)
-{
-	if (!delayed_work_pending(&rfkill_task.dwork)) {
-		schedule_delayed_work(&rfkill_task.dwork,
-				rfkill_ratelimit(rfkill_task.last_scheduled));
-		rfkill_task.last_scheduled = jiffies;
-	}
-}
-
-static void rfkill_schedule_global_op(enum rfkill_global_sched_op op)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rfkill_task.lock, flags);
-	rfkill_task.op = op;
-	rfkill_task.global_op_pending = true;
-	if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) {
-		/* bypass the limiter for EPO */
-		cancel_delayed_work(&rfkill_task.dwork);
-		schedule_delayed_work(&rfkill_task.dwork, 0);
-		rfkill_task.last_scheduled = jiffies;
-	} else
-		rfkill_schedule_ratelimited();
-	spin_unlock_irqrestore(&rfkill_task.lock, flags);
-}
-
-#ifdef RFKILL_NEED_SWSET
-/* Use this if you need to add EV_SW SW_WLAN/WWAN/BLUETOOTH/etc handling */
-
-static void rfkill_schedule_set(enum rfkill_type type,
-				enum rfkill_state desired_state)
-{
-	unsigned long flags;
-
-	if (rfkill_is_epo_lock_active())
-		return;
-
-	spin_lock_irqsave(&rfkill_task.lock, flags);
-	if (!rfkill_task.global_op_pending) {
-		set_bit(type, rfkill_task.sw_pending);
-		set_bit(type, rfkill_task.sw_setpending);
-		clear_bit(type, rfkill_task.sw_togglestate);
-		if (desired_state)
-			set_bit(type,  rfkill_task.sw_newstate);
-		else
-			clear_bit(type, rfkill_task.sw_newstate);
-		rfkill_schedule_ratelimited();
-	}
-	spin_unlock_irqrestore(&rfkill_task.lock, flags);
-}
-#endif
-
-static void rfkill_schedule_toggle(enum rfkill_type type)
-{
-	unsigned long flags;
-
-	if (rfkill_is_epo_lock_active())
-		return;
-
-	spin_lock_irqsave(&rfkill_task.lock, flags);
-	if (!rfkill_task.global_op_pending) {
-		set_bit(type, rfkill_task.sw_pending);
-		change_bit(type, rfkill_task.sw_togglestate);
-		rfkill_schedule_ratelimited();
-	}
-	spin_unlock_irqrestore(&rfkill_task.lock, flags);
-}
-
-static void rfkill_schedule_evsw_rfkillall(int state)
-{
-	if (state) {
-		switch (rfkill_master_switch_mode) {
-		case RFKILL_INPUT_MASTER_UNBLOCKALL:
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNBLOCK);
-			break;
-		case RFKILL_INPUT_MASTER_RESTORE:
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_RESTORE);
-			break;
-		case RFKILL_INPUT_MASTER_DONOTHING:
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNLOCK);
-			break;
-		default:
-			/* memory corruption or driver bug! fail safely */
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
-			WARN(1, "Unknown rfkill_master_switch_mode (%d), "
-				"driver bug or memory corruption detected!\n",
-				rfkill_master_switch_mode);
-			break;
-		}
-	} else
-		rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
-}
-
-static void rfkill_event(struct input_handle *handle, unsigned int type,
-			unsigned int code, int data)
-{
-	if (type == EV_KEY && data == 1) {
-		enum rfkill_type t;
-
-		switch (code) {
-		case KEY_WLAN:
-			t = RFKILL_TYPE_WLAN;
-			break;
-		case KEY_BLUETOOTH:
-			t = RFKILL_TYPE_BLUETOOTH;
-			break;
-		case KEY_UWB:
-			t = RFKILL_TYPE_UWB;
-			break;
-		case KEY_WIMAX:
-			t = RFKILL_TYPE_WIMAX;
-			break;
-		default:
-			return;
-		}
-		rfkill_schedule_toggle(t);
-		return;
-	} else if (type == EV_SW) {
-		switch (code) {
-		case SW_RFKILL_ALL:
-			rfkill_schedule_evsw_rfkillall(data);
-			return;
-		default:
-			return;
-		}
-	}
-}
-
-static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
-			  const struct input_device_id *id)
-{
-	struct input_handle *handle;
-	int error;
-
-	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
-	if (!handle)
-		return -ENOMEM;
-
-	handle->dev = dev;
-	handle->handler = handler;
-	handle->name = "rfkill";
-
-	/* causes rfkill_start() to be called */
-	error = input_register_handle(handle);
-	if (error)
-		goto err_free_handle;
-
-	error = input_open_device(handle);
-	if (error)
-		goto err_unregister_handle;
-
-	return 0;
-
- err_unregister_handle:
-	input_unregister_handle(handle);
- err_free_handle:
-	kfree(handle);
-	return error;
-}
-
-static void rfkill_start(struct input_handle *handle)
-{
-	/* Take event_lock to guard against configuration changes, we
-	 * should be able to deal with concurrency with rfkill_event()
-	 * just fine (which event_lock will also avoid). */
-	spin_lock_irq(&handle->dev->event_lock);
-
-	if (test_bit(EV_SW, handle->dev->evbit)) {
-		if (test_bit(SW_RFKILL_ALL, handle->dev->swbit))
-			rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
-							handle->dev->sw));
-		/* add resync for further EV_SW events here */
-	}
-
-	spin_unlock_irq(&handle->dev->event_lock);
-}
-
-static void rfkill_disconnect(struct input_handle *handle)
-{
-	input_close_device(handle);
-	input_unregister_handle(handle);
-	kfree(handle);
-}
-
-static const struct input_device_id rfkill_ids[] = {
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
-		.evbit = { BIT(EV_SW) },
-		.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
-	},
-	{ }
-};
-
-static struct input_handler rfkill_handler = {
-	.event =	rfkill_event,
-	.connect =	rfkill_connect,
-	.disconnect =	rfkill_disconnect,
-	.start =	rfkill_start,
-	.name =		"rfkill",
-	.id_table =	rfkill_ids,
-};
-
-static int __init rfkill_handler_init(void)
-{
-	if (rfkill_master_switch_mode >= RFKILL_INPUT_MASTER_MAX)
-		return -EINVAL;
-
-	/*
-	 * The penalty to not doing this is a possible RFKILL_OPS_DELAY delay
-	 * at the first use.  Acceptable, but if we can avoid it, why not?
-	 */
-	rfkill_task.last_scheduled =
-			jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1;
-	return input_register_handler(&rfkill_handler);
-}
-
-static void __exit rfkill_handler_exit(void)
-{
-	input_unregister_handler(&rfkill_handler);
-	cancel_delayed_work_sync(&rfkill_task.dwork);
-	rfkill_remove_epo_lock();
-}
-
-module_init(rfkill_handler_init);
-module_exit(rfkill_handler_exit);
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
deleted file mode 100644
index 3eaa39403c1..00000000000
--- a/net/rfkill/rfkill.c
+++ /dev/null
@@ -1,882 +0,0 @@
-/*
- * Copyright (C) 2006 - 2007 Ivo van Doorn
- * Copyright (C) 2007 Dmitry Torokhov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/capability.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/rfkill.h>
-
-/* Get declaration of rfkill_switch_all() to shut up sparse. */
-#include "rfkill-input.h"
-
-
-MODULE_AUTHOR("Ivo van Doorn <IvDoorn@gmail.com>");
-MODULE_VERSION("1.0");
-MODULE_DESCRIPTION("RF switch support");
-MODULE_LICENSE("GPL");
-
-static LIST_HEAD(rfkill_list);	/* list of registered rf switches */
-static DEFINE_MUTEX(rfkill_global_mutex);
-
-static unsigned int rfkill_default_state = RFKILL_STATE_UNBLOCKED;
-module_param_named(default_state, rfkill_default_state, uint, 0444);
-MODULE_PARM_DESC(default_state,
-		 "Default initial state for all radio types, 0 = radio off");
-
-struct rfkill_gsw_state {
-	enum rfkill_state current_state;
-	enum rfkill_state default_state;
-};
-
-static struct rfkill_gsw_state rfkill_global_states[RFKILL_TYPE_MAX];
-static unsigned long rfkill_states_lockdflt[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-static bool rfkill_epo_lock_active;
-
-
-#ifdef CONFIG_RFKILL_LEDS
-static void rfkill_led_trigger(struct rfkill *rfkill,
-			       enum rfkill_state state)
-{
-	struct led_trigger *led = &rfkill->led_trigger;
-
-	if (!led->name)
-		return;
-	if (state != RFKILL_STATE_UNBLOCKED)
-		led_trigger_event(led, LED_OFF);
-	else
-		led_trigger_event(led, LED_FULL);
-}
-
-static void rfkill_led_trigger_activate(struct led_classdev *led)
-{
-	struct rfkill *rfkill = container_of(led->trigger,
-			struct rfkill, led_trigger);
-
-	rfkill_led_trigger(rfkill, rfkill->state);
-}
-#endif /* CONFIG_RFKILL_LEDS */
-
-static void rfkill_uevent(struct rfkill *rfkill)
-{
-	kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
-}
-
-static void update_rfkill_state(struct rfkill *rfkill)
-{
-	enum rfkill_state newstate, oldstate;
-
-	if (rfkill->get_state) {
-		mutex_lock(&rfkill->mutex);
-		if (!rfkill->get_state(rfkill->data, &newstate)) {
-			oldstate = rfkill->state;
-			rfkill->state = newstate;
-			if (oldstate != newstate)
-				rfkill_uevent(rfkill);
-		}
-		mutex_unlock(&rfkill->mutex);
-	}
-}
-
-/**
- * rfkill_toggle_radio - wrapper for toggle_radio hook
- * @rfkill: the rfkill struct to use
- * @force: calls toggle_radio even if cache says it is not needed,
- *	and also makes sure notifications of the state will be
- *	sent even if it didn't change
- * @state: the new state to call toggle_radio() with
- *
- * Calls rfkill->toggle_radio, enforcing the API for toggle_radio
- * calls and handling all the red tape such as issuing notifications
- * if the call is successful.
- *
- * Suspended devices are not touched at all, and -EAGAIN is returned.
- *
- * Note that the @force parameter cannot override a (possibly cached)
- * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
- * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
- * rfkill_force_state(), so the cache either is bypassed or valid.
- *
- * Note that we do call toggle_radio for RFKILL_STATE_SOFT_BLOCKED
- * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
- * give the driver a hint that it should double-BLOCK the transmitter.
- *
- * Caller must have acquired rfkill->mutex.
- */
-static int rfkill_toggle_radio(struct rfkill *rfkill,
-				enum rfkill_state state,
-				int force)
-{
-	int retval = 0;
-	enum rfkill_state oldstate, newstate;
-
-	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
-		return -EBUSY;
-
-	oldstate = rfkill->state;
-
-	if (rfkill->get_state && !force &&
-	    !rfkill->get_state(rfkill->data, &newstate))
-		rfkill->state = newstate;
-
-	switch (state) {
-	case RFKILL_STATE_HARD_BLOCKED:
-		/* typically happens when refreshing hardware state,
-		 * such as on resume */
-		state = RFKILL_STATE_SOFT_BLOCKED;
-		break;
-	case RFKILL_STATE_UNBLOCKED:
-		/* force can't override this, only rfkill_force_state() can */
-		if (rfkill->state == RFKILL_STATE_HARD_BLOCKED)
-			return -EPERM;
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		/* nothing to do, we want to give drivers the hint to double
-		 * BLOCK even a transmitter that is already in state
-		 * RFKILL_STATE_HARD_BLOCKED */
-		break;
-	default:
-		WARN(1, KERN_WARNING
-			"rfkill: illegal state %d passed as parameter "
-			"to rfkill_toggle_radio\n", state);
-		return -EINVAL;
-	}
-
-	if (force || state != rfkill->state) {
-		retval = rfkill->toggle_radio(rfkill->data, state);
-		/* never allow a HARD->SOFT downgrade! */
-		if (!retval && rfkill->state != RFKILL_STATE_HARD_BLOCKED)
-			rfkill->state = state;
-	}
-
-	if (force || rfkill->state != oldstate)
-		rfkill_uevent(rfkill);
-
-	return retval;
-}
-
-/**
- * __rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affected
- * @state: the new state
- *
- * This function toggles the state of all switches of given type,
- * unless a specific switch is claimed by userspace (in which case,
- * that switch is left alone) or suspended.
- *
- * Caller must have acquired rfkill_global_mutex.
- */
-static void __rfkill_switch_all(const enum rfkill_type type,
-				const enum rfkill_state state)
-{
-	struct rfkill *rfkill;
-
-	if (WARN((state >= RFKILL_STATE_MAX || type >= RFKILL_TYPE_MAX),
-			KERN_WARNING
-			"rfkill: illegal state %d or type %d "
-			"passed as parameter to __rfkill_switch_all\n",
-			state, type))
-		return;
-
-	rfkill_global_states[type].current_state = state;
-	list_for_each_entry(rfkill, &rfkill_list, node) {
-		if ((!rfkill->user_claim) && (rfkill->type == type)) {
-			mutex_lock(&rfkill->mutex);
-			rfkill_toggle_radio(rfkill, state, 0);
-			mutex_unlock(&rfkill->mutex);
-		}
-	}
-}
-
-/**
- * rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affected
- * @state: the new state
- *
- * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state).
- * Please refer to __rfkill_switch_all() for details.
- *
- * Does nothing if the EPO lock is active.
- */
-void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
-{
-	mutex_lock(&rfkill_global_mutex);
-	if (!rfkill_epo_lock_active)
-		__rfkill_switch_all(type, state);
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL(rfkill_switch_all);
-
-/**
- * rfkill_epo - emergency power off all transmitters
- *
- * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
- * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex.
- *
- * The global state before the EPO is saved and can be restored later
- * using rfkill_restore_states().
- */
-void rfkill_epo(void)
-{
-	struct rfkill *rfkill;
-	int i;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	rfkill_epo_lock_active = true;
-	list_for_each_entry(rfkill, &rfkill_list, node) {
-		mutex_lock(&rfkill->mutex);
-		rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
-		mutex_unlock(&rfkill->mutex);
-	}
-	for (i = 0; i < RFKILL_TYPE_MAX; i++) {
-		rfkill_global_states[i].default_state =
-				rfkill_global_states[i].current_state;
-		rfkill_global_states[i].current_state =
-				RFKILL_STATE_SOFT_BLOCKED;
-	}
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL_GPL(rfkill_epo);
-
-/**
- * rfkill_restore_states - restore global states
- *
- * Restore (and sync switches to) the global state from the
- * states in rfkill_default_states.  This can undo the effects of
- * a call to rfkill_epo().
- */
-void rfkill_restore_states(void)
-{
-	int i;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	rfkill_epo_lock_active = false;
-	for (i = 0; i < RFKILL_TYPE_MAX; i++)
-		__rfkill_switch_all(i, rfkill_global_states[i].default_state);
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL_GPL(rfkill_restore_states);
-
-/**
- * rfkill_remove_epo_lock - unlock state changes
- *
- * Used by rfkill-input manually unlock state changes, when
- * the EPO switch is deactivated.
- */
-void rfkill_remove_epo_lock(void)
-{
-	mutex_lock(&rfkill_global_mutex);
-	rfkill_epo_lock_active = false;
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL_GPL(rfkill_remove_epo_lock);
-
-/**
- * rfkill_is_epo_lock_active - returns true EPO is active
- *
- * Returns 0 (false) if there is NOT an active EPO contidion,
- * and 1 (true) if there is an active EPO contition, which
- * locks all radios in one of the BLOCKED states.
- *
- * Can be called in atomic context.
- */
-bool rfkill_is_epo_lock_active(void)
-{
-	return rfkill_epo_lock_active;
-}
-EXPORT_SYMBOL_GPL(rfkill_is_epo_lock_active);
-
-/**
- * rfkill_get_global_state - returns global state for a type
- * @type: the type to get the global state of
- *
- * Returns the current global state for a given wireless
- * device type.
- */
-enum rfkill_state rfkill_get_global_state(const enum rfkill_type type)
-{
-	return rfkill_global_states[type].current_state;
-}
-EXPORT_SYMBOL_GPL(rfkill_get_global_state);
-
-/**
- * rfkill_force_state - Force the internal rfkill radio state
- * @rfkill: pointer to the rfkill class to modify.
- * @state: the current radio state the class should be forced to.
- *
- * This function updates the internal state of the radio cached
- * by the rfkill class.  It should be used when the driver gets
- * a notification by the firmware/hardware of the current *real*
- * state of the radio rfkill switch.
- *
- * Devices which are subject to external changes on their rfkill
- * state (such as those caused by a hardware rfkill line) MUST
- * have their driver arrange to call rfkill_force_state() as soon
- * as possible after such a change.
- *
- * This function may not be called from an atomic context.
- */
-int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
-{
-	enum rfkill_state oldstate;
-
-	BUG_ON(!rfkill);
-	if (WARN((state >= RFKILL_STATE_MAX),
-			KERN_WARNING
-			"rfkill: illegal state %d passed as parameter "
-			"to rfkill_force_state\n", state))
-		return -EINVAL;
-
-	mutex_lock(&rfkill->mutex);
-
-	oldstate = rfkill->state;
-	rfkill->state = state;
-
-	if (state != oldstate)
-		rfkill_uevent(rfkill);
-
-	mutex_unlock(&rfkill->mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(rfkill_force_state);
-
-static ssize_t rfkill_name_show(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	return sprintf(buf, "%s\n", rfkill->name);
-}
-
-static const char *rfkill_get_type_str(enum rfkill_type type)
-{
-	switch (type) {
-	case RFKILL_TYPE_WLAN:
-		return "wlan";
-	case RFKILL_TYPE_BLUETOOTH:
-		return "bluetooth";
-	case RFKILL_TYPE_UWB:
-		return "ultrawideband";
-	case RFKILL_TYPE_WIMAX:
-		return "wimax";
-	case RFKILL_TYPE_WWAN:
-		return "wwan";
-	default:
-		BUG();
-	}
-}
-
-static ssize_t rfkill_type_show(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type));
-}
-
-static ssize_t rfkill_state_show(struct device *dev,
-				 struct device_attribute *attr,
-				 char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	update_rfkill_state(rfkill);
-	return sprintf(buf, "%d\n", rfkill->state);
-}
-
-static ssize_t rfkill_state_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	unsigned long state;
-	int error;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	error = strict_strtoul(buf, 0, &state);
-	if (error)
-		return error;
-
-	/* RFKILL_STATE_HARD_BLOCKED is illegal here... */
-	if (state != RFKILL_STATE_UNBLOCKED &&
-	    state != RFKILL_STATE_SOFT_BLOCKED)
-		return -EINVAL;
-
-	error = mutex_lock_killable(&rfkill->mutex);
-	if (error)
-		return error;
-
-	if (!rfkill_epo_lock_active)
-		error = rfkill_toggle_radio(rfkill, state, 0);
-	else
-		error = -EPERM;
-
-	mutex_unlock(&rfkill->mutex);
-
-	return error ? error : count;
-}
-
-static ssize_t rfkill_claim_show(struct device *dev,
-				 struct device_attribute *attr,
-				 char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	return sprintf(buf, "%d\n", rfkill->user_claim);
-}
-
-static ssize_t rfkill_claim_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	unsigned long claim_tmp;
-	bool claim;
-	int error;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (rfkill->user_claim_unsupported)
-		return -EOPNOTSUPP;
-
-	error = strict_strtoul(buf, 0, &claim_tmp);
-	if (error)
-		return error;
-	claim = !!claim_tmp;
-
-	/*
-	 * Take the global lock to make sure the kernel is not in
-	 * the middle of rfkill_switch_all
-	 */
-	error = mutex_lock_killable(&rfkill_global_mutex);
-	if (error)
-		return error;
-
-	if (rfkill->user_claim != claim) {
-		if (!claim && !rfkill_epo_lock_active) {
-			mutex_lock(&rfkill->mutex);
-			rfkill_toggle_radio(rfkill,
-					rfkill_global_states[rfkill->type].current_state,
-					0);
-			mutex_unlock(&rfkill->mutex);
-		}
-		rfkill->user_claim = claim;
-	}
-
-	mutex_unlock(&rfkill_global_mutex);
-
-	return error ? error : count;
-}
-
-static struct device_attribute rfkill_dev_attrs[] = {
-	__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
-	__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
-	__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
-	__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
-	__ATTR_NULL
-};
-
-static void rfkill_release(struct device *dev)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	kfree(rfkill);
-	module_put(THIS_MODULE);
-}
-
-#ifdef CONFIG_PM
-static int rfkill_suspend(struct device *dev, pm_message_t state)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	/* mark class device as suspended */
-	if (dev->power.power_state.event != state.event)
-		dev->power.power_state = state;
-
-	/* store state for the resume handler */
-	rfkill->state_for_resume = rfkill->state;
-
-	return 0;
-}
-
-static int rfkill_resume(struct device *dev)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	enum rfkill_state newstate;
-
-	if (dev->power.power_state.event != PM_EVENT_ON) {
-		mutex_lock(&rfkill->mutex);
-
-		dev->power.power_state.event = PM_EVENT_ON;
-
-		/*
-		 * rfkill->state could have been modified before we got
-		 * called, and won't be updated by rfkill_toggle_radio()
-		 * in force mode.  Sync it FIRST.
-		 */
-		if (rfkill->get_state &&
-		    !rfkill->get_state(rfkill->data, &newstate))
-			rfkill->state = newstate;
-
-		/*
-		 * If we are under EPO, kick transmitter offline,
-		 * otherwise restore to pre-suspend state.
-		 *
-		 * Issue a notification in any case
-		 */
-		rfkill_toggle_radio(rfkill,
-				rfkill_epo_lock_active ?
-					RFKILL_STATE_SOFT_BLOCKED :
-					rfkill->state_for_resume,
-				1);
-
-		mutex_unlock(&rfkill->mutex);
-	}
-
-	return 0;
-}
-#else
-#define rfkill_suspend NULL
-#define rfkill_resume NULL
-#endif
-
-static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	int error;
-
-	error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name);
-	if (error)
-		return error;
-	error = add_uevent_var(env, "RFKILL_TYPE=%s",
-				rfkill_get_type_str(rfkill->type));
-	if (error)
-		return error;
-	error = add_uevent_var(env, "RFKILL_STATE=%d", rfkill->state);
-	return error;
-}
-
-static struct class rfkill_class = {
-	.name		= "rfkill",
-	.dev_release	= rfkill_release,
-	.dev_attrs	= rfkill_dev_attrs,
-	.suspend	= rfkill_suspend,
-	.resume		= rfkill_resume,
-	.dev_uevent	= rfkill_dev_uevent,
-};
-
-static int rfkill_check_duplicity(const struct rfkill *rfkill)
-{
-	struct rfkill *p;
-	unsigned long seen[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-	memset(seen, 0, sizeof(seen));
-
-	list_for_each_entry(p, &rfkill_list, node) {
-		if (WARN((p == rfkill), KERN_WARNING
-				"rfkill: illegal attempt to register "
-				"an already registered rfkill struct\n"))
-			return -EEXIST;
-		set_bit(p->type, seen);
-	}
-
-	/* 0: first switch of its kind */
-	return (test_bit(rfkill->type, seen)) ? 1 : 0;
-}
-
-static int rfkill_add_switch(struct rfkill *rfkill)
-{
-	int error;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	error = rfkill_check_duplicity(rfkill);
-	if (error < 0)
-		goto unlock_out;
-
-	if (!error) {
-		/* lock default after first use */
-		set_bit(rfkill->type, rfkill_states_lockdflt);
-		rfkill_global_states[rfkill->type].current_state =
-			rfkill_global_states[rfkill->type].default_state;
-	}
-
-	rfkill_toggle_radio(rfkill,
-			    rfkill_global_states[rfkill->type].current_state,
-			    0);
-
-	list_add_tail(&rfkill->node, &rfkill_list);
-
-	error = 0;
-unlock_out:
-	mutex_unlock(&rfkill_global_mutex);
-
-	return error;
-}
-
-static void rfkill_remove_switch(struct rfkill *rfkill)
-{
-	mutex_lock(&rfkill_global_mutex);
-	list_del_init(&rfkill->node);
-	mutex_unlock(&rfkill_global_mutex);
-
-	mutex_lock(&rfkill->mutex);
-	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
-	mutex_unlock(&rfkill->mutex);
-}
-
-/**
- * rfkill_allocate - allocate memory for rfkill structure.
- * @parent: device that has rf switch on it
- * @type: type of the switch (RFKILL_TYPE_*)
- *
- * This function should be called by the network driver when it needs
- * rfkill structure.  Once the structure is allocated the driver should
- * finish its initialization by setting the name, private data, enable_radio
- * and disable_radio methods and then register it with rfkill_register().
- *
- * NOTE: If registration fails the structure shoudl be freed by calling
- * rfkill_free() otherwise rfkill_unregister() should be used.
- */
-struct rfkill * __must_check rfkill_allocate(struct device *parent,
-					     enum rfkill_type type)
-{
-	struct rfkill *rfkill;
-	struct device *dev;
-
-	if (WARN((type >= RFKILL_TYPE_MAX),
-			KERN_WARNING
-			"rfkill: illegal type %d passed as parameter "
-			"to rfkill_allocate\n", type))
-		return NULL;
-
-	rfkill = kzalloc(sizeof(struct rfkill), GFP_KERNEL);
-	if (!rfkill)
-		return NULL;
-
-	mutex_init(&rfkill->mutex);
-	INIT_LIST_HEAD(&rfkill->node);
-	rfkill->type = type;
-
-	dev = &rfkill->dev;
-	dev->class = &rfkill_class;
-	dev->parent = parent;
-	device_initialize(dev);
-
-	__module_get(THIS_MODULE);
-
-	return rfkill;
-}
-EXPORT_SYMBOL(rfkill_allocate);
-
-/**
- * rfkill_free - Mark rfkill structure for deletion
- * @rfkill: rfkill structure to be destroyed
- *
- * Decrements reference count of the rfkill structure so it is destroyed.
- * Note that rfkill_free() should _not_ be called after rfkill_unregister().
- */
-void rfkill_free(struct rfkill *rfkill)
-{
-	if (rfkill)
-		put_device(&rfkill->dev);
-}
-EXPORT_SYMBOL(rfkill_free);
-
-static void rfkill_led_trigger_register(struct rfkill *rfkill)
-{
-#ifdef CONFIG_RFKILL_LEDS
-	int error;
-
-	if (!rfkill->led_trigger.name)
-		rfkill->led_trigger.name = dev_name(&rfkill->dev);
-	if (!rfkill->led_trigger.activate)
-		rfkill->led_trigger.activate = rfkill_led_trigger_activate;
-	error = led_trigger_register(&rfkill->led_trigger);
-	if (error)
-		rfkill->led_trigger.name = NULL;
-#endif /* CONFIG_RFKILL_LEDS */
-}
-
-static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
-{
-#ifdef CONFIG_RFKILL_LEDS
-	if (rfkill->led_trigger.name) {
-		led_trigger_unregister(&rfkill->led_trigger);
-		rfkill->led_trigger.name = NULL;
-	}
-#endif
-}
-
-/**
- * rfkill_register - Register a rfkill structure.
- * @rfkill: rfkill structure to be registered
- *
- * This function should be called by the network driver when the rfkill
- * structure needs to be registered. Immediately from registration the
- * switch driver should be able to service calls to toggle_radio.
- */
-int __must_check rfkill_register(struct rfkill *rfkill)
-{
-	static atomic_t rfkill_no = ATOMIC_INIT(0);
-	struct device *dev = &rfkill->dev;
-	int error;
-
-	if (WARN((!rfkill || !rfkill->toggle_radio ||
-			rfkill->type >= RFKILL_TYPE_MAX ||
-			rfkill->state >= RFKILL_STATE_MAX),
-			KERN_WARNING
-			"rfkill: attempt to register a "
-			"badly initialized rfkill struct\n"))
-		return -EINVAL;
-
-	dev_set_name(dev, "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
-
-	rfkill_led_trigger_register(rfkill);
-
-	error = rfkill_add_switch(rfkill);
-	if (error) {
-		rfkill_led_trigger_unregister(rfkill);
-		return error;
-	}
-
-	error = device_add(dev);
-	if (error) {
-		rfkill_remove_switch(rfkill);
-		rfkill_led_trigger_unregister(rfkill);
-		return error;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(rfkill_register);
-
-/**
- * rfkill_unregister - Unregister a rfkill structure.
- * @rfkill: rfkill structure to be unregistered
- *
- * This function should be called by the network driver during device
- * teardown to destroy rfkill structure. Note that rfkill_free() should
- * _not_ be called after rfkill_unregister().
- */
-void rfkill_unregister(struct rfkill *rfkill)
-{
-	BUG_ON(!rfkill);
-	device_del(&rfkill->dev);
-	rfkill_remove_switch(rfkill);
-	rfkill_led_trigger_unregister(rfkill);
-	put_device(&rfkill->dev);
-}
-EXPORT_SYMBOL(rfkill_unregister);
-
-/**
- * rfkill_set_default - set initial value for a switch type
- * @type - the type of switch to set the default state of
- * @state - the new default state for that group of switches
- *
- * Sets the initial state rfkill should use for a given type.
- * The following initial states are allowed: RFKILL_STATE_SOFT_BLOCKED
- * and RFKILL_STATE_UNBLOCKED.
- *
- * This function is meant to be used by platform drivers for platforms
- * that can save switch state across power down/reboot.
- *
- * The default state for each switch type can be changed exactly once.
- * After a switch of that type is registered, the default state cannot
- * be changed anymore.  This guards against multiple drivers it the
- * same platform trying to set the initial switch default state, which
- * is not allowed.
- *
- * Returns -EPERM if the state has already been set once or is in use,
- * so drivers likely want to either ignore or at most printk(KERN_NOTICE)
- * if this function returns -EPERM.
- *
- * Returns 0 if the new default state was set, or an error if it
- * could not be set.
- */
-int rfkill_set_default(enum rfkill_type type, enum rfkill_state state)
-{
-	int error;
-
-	if (WARN((type >= RFKILL_TYPE_MAX ||
-			(state != RFKILL_STATE_SOFT_BLOCKED &&
-			 state != RFKILL_STATE_UNBLOCKED)),
-			KERN_WARNING
-			"rfkill: illegal state %d or type %d passed as "
-			"parameter to rfkill_set_default\n", state, type))
-		return -EINVAL;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	if (!test_and_set_bit(type, rfkill_states_lockdflt)) {
-		rfkill_global_states[type].default_state = state;
-		rfkill_global_states[type].current_state = state;
-		error = 0;
-	} else
-		error = -EPERM;
-
-	mutex_unlock(&rfkill_global_mutex);
-	return error;
-}
-EXPORT_SYMBOL_GPL(rfkill_set_default);
-
-/*
- * Rfkill module initialization/deinitialization.
- */
-static int __init rfkill_init(void)
-{
-	int error;
-	int i;
-
-	/* RFKILL_STATE_HARD_BLOCKED is illegal here... */
-	if (rfkill_default_state != RFKILL_STATE_SOFT_BLOCKED &&
-	    rfkill_default_state != RFKILL_STATE_UNBLOCKED)
-		return -EINVAL;
-
-	for (i = 0; i < RFKILL_TYPE_MAX; i++)
-		rfkill_global_states[i].default_state = rfkill_default_state;
-
-	error = class_register(&rfkill_class);
-	if (error) {
-		printk(KERN_ERR "rfkill: unable to register rfkill class\n");
-		return error;
-	}
-
-	return 0;
-}
-
-static void __exit rfkill_exit(void)
-{
-	class_unregister(&rfkill_class);
-}
-
-subsys_initcall(rfkill_init);
-module_exit(rfkill_exit);
diff --git a/net/rfkill/rfkill-input.h b/net/rfkill/rfkill.h
index fe8df6b5b93..d1117cb6e4d 100644
--- a/net/rfkill/rfkill-input.h
+++ b/net/rfkill/rfkill.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2007 Ivo van Doorn
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
  */
 
 /*
@@ -11,11 +12,16 @@
 #ifndef __RFKILL_INPUT_H
 #define __RFKILL_INPUT_H
 
-void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state);
+/* core code */
+void rfkill_switch_all(const enum rfkill_type type, bool blocked);
 void rfkill_epo(void);
 void rfkill_restore_states(void);
 void rfkill_remove_epo_lock(void);
 bool rfkill_is_epo_lock_active(void);
-enum rfkill_state rfkill_get_global_state(const enum rfkill_type type);
+bool rfkill_get_global_sw_state(const enum rfkill_type type);
+
+/* input handler */
+int rfkill_handler_init(void);
+void rfkill_handler_exit(void);
 
 #endif /* __RFKILL_INPUT_H */
diff --git a/net/rose/rose_dev.c b/net/rose/rose_dev.c
index 7dcf2569613..389d6e0d774 100644
--- a/net/rose/rose_dev.c
+++ b/net/rose/rose_dev.c
@@ -137,7 +137,7 @@ static int rose_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!netif_running(dev)) {
 		printk(KERN_ERR "ROSE: rose_xmit - called when iface is down\n");
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	dev_kfree_skb(skb);
 	stats->tx_errors++;
diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c
index e5becb92b3e..e4877ca6727 100644
--- a/net/sched/cls_cgroup.c
+++ b/net/sched/cls_cgroup.c
@@ -62,13 +62,7 @@ static u64 read_classid(struct cgroup *cgrp, struct cftype *cft)
 
 static int write_classid(struct cgroup *cgrp, struct cftype *cft, u64 value)
 {
-	if (!cgroup_lock_live_group(cgrp))
-		return -ENODEV;
-
 	cgrp_cls_state(cgrp)->classid = (u32) value;
-
-	cgroup_unlock();
-
 	return 0;
 }
 
diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index 0ef4e3065bc..9402a7fd378 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -84,7 +84,7 @@ static u32 flow_get_dst(const struct sk_buff *skb)
 	case htons(ETH_P_IPV6):
 		return ntohl(ipv6_hdr(skb)->daddr.s6_addr32[3]);
 	default:
-		return addr_fold(skb->dst) ^ (__force u16)skb->protocol;
+		return addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 	}
 }
 
@@ -163,7 +163,7 @@ static u32 flow_get_proto_dst(const struct sk_buff *skb)
 		break;
 	}
 	default:
-		res = addr_fold(skb->dst) ^ (__force u16)skb->protocol;
+		res = addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 	}
 
 	return res;
@@ -251,8 +251,8 @@ fallback:
 static u32 flow_get_rtclassid(const struct sk_buff *skb)
 {
 #ifdef CONFIG_NET_CLS_ROUTE
-	if (skb->dst)
-		return skb->dst->tclassid;
+	if (skb_dst(skb))
+		return skb_dst(skb)->tclassid;
 #endif
 	return 0;
 }
diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c
index bdf1f4172ee..dd872d5383e 100644
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -137,7 +137,7 @@ static int route4_classify(struct sk_buff *skb, struct tcf_proto *tp,
 	u32 id, h;
 	int iif, dont_cache = 0;
 
-	if ((dst = skb->dst) == NULL)
+	if ((dst = skb_dst(skb)) == NULL)
 		goto failure;
 
 	id = dst->tclassid;
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index fad596bf32d..266151ae85a 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -246,11 +246,11 @@ META_COLLECTOR(int_tcindex)
 
 META_COLLECTOR(int_rtclassid)
 {
-	if (unlikely(skb->dst == NULL))
+	if (unlikely(skb_dst(skb) == NULL))
 		*err = -1;
 	else
 #ifdef CONFIG_NET_CLS_ROUTE
-		dst->value = skb->dst->tclassid;
+		dst->value = skb_dst(skb)->tclassid;
 #else
 		dst->value = 0;
 #endif
@@ -258,10 +258,10 @@ META_COLLECTOR(int_rtclassid)
 
 META_COLLECTOR(int_rtiif)
 {
-	if (unlikely(skb->rtable == NULL))
+	if (unlikely(skb_rtable(skb) == NULL))
 		*err = -1;
 	else
-		dst->value = skb->rtable->fl.iif;
+		dst->value = skb_rtable(skb)->fl.iif;
 }
 
 /**************************************************************************
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 32009793307..24d17ce9c29 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -484,7 +484,7 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires)
 
 	wd->qdisc->flags |= TCQ_F_THROTTLED;
 	time = ktime_set(0, 0);
-	time = ktime_add_ns(time, PSCHED_US2NS(expires));
+	time = ktime_add_ns(time, PSCHED_TICKS2NS(expires));
 	hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
 }
 EXPORT_SYMBOL(qdisc_watchdog_schedule);
@@ -1680,7 +1680,7 @@ static int psched_show(struct seq_file *seq, void *v)
 
 	hrtimer_get_res(CLOCK_MONOTONIC, &ts);
 	seq_printf(seq, "%08x %08x %08x %08x\n",
-		   (u32)NSEC_PER_USEC, (u32)PSCHED_US2NS(1),
+		   (u32)NSEC_PER_USEC, (u32)PSCHED_TICKS2NS(1),
 		   1000000,
 		   (u32)NSEC_PER_SEC/(u32)ktime_to_ns(timespec_to_ktime(ts)));
 
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index d728d811173..23a167670fd 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -509,7 +509,7 @@ static void cbq_ovl_delay(struct cbq_class *cl)
 			q->pmask |= (1<<TC_CBQ_MAXPRIO);
 
 			expires = ktime_set(0, 0);
-			expires = ktime_add_ns(expires, PSCHED_US2NS(sched));
+			expires = ktime_add_ns(expires, PSCHED_TICKS2NS(sched));
 			if (hrtimer_try_to_cancel(&q->delay_timer) &&
 			    ktime_to_ns(ktime_sub(
 					hrtimer_get_expires(&q->delay_timer),
@@ -620,7 +620,7 @@ static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
 		ktime_t time;
 
 		time = ktime_set(0, 0);
-		time = ktime_add_ns(time, PSCHED_US2NS(now + delay));
+		time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay));
 		hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
 	}
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 5f5efe4e607..27d03816ec3 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -196,6 +196,21 @@ void __qdisc_run(struct Qdisc *q)
 	clear_bit(__QDISC_STATE_RUNNING, &q->state);
 }
 
+unsigned long dev_trans_start(struct net_device *dev)
+{
+	unsigned long val, res = dev->trans_start;
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		val = netdev_get_tx_queue(dev, i)->trans_start;
+		if (val && time_after(val, res))
+			res = val;
+	}
+	dev->trans_start = res;
+	return res;
+}
+EXPORT_SYMBOL(dev_trans_start);
+
 static void dev_watchdog(unsigned long arg)
 {
 	struct net_device *dev = (struct net_device *)arg;
@@ -205,25 +220,30 @@ static void dev_watchdog(unsigned long arg)
 		if (netif_device_present(dev) &&
 		    netif_running(dev) &&
 		    netif_carrier_ok(dev)) {
-			int some_queue_stopped = 0;
+			int some_queue_timedout = 0;
 			unsigned int i;
+			unsigned long trans_start;
 
 			for (i = 0; i < dev->num_tx_queues; i++) {
 				struct netdev_queue *txq;
 
 				txq = netdev_get_tx_queue(dev, i);
-				if (netif_tx_queue_stopped(txq)) {
-					some_queue_stopped = 1;
+				/*
+				 * old device drivers set dev->trans_start
+				 */
+				trans_start = txq->trans_start ? : dev->trans_start;
+				if (netif_tx_queue_stopped(txq) &&
+				    time_after(jiffies, (trans_start +
+							 dev->watchdog_timeo))) {
+					some_queue_timedout = 1;
 					break;
 				}
 			}
 
-			if (some_queue_stopped &&
-			    time_after(jiffies, (dev->trans_start +
-						 dev->watchdog_timeo))) {
+			if (some_queue_timedout) {
 				char drivername[64];
-				WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
-				       dev->name, netdev_drivername(dev, drivername, 64));
+				WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n",
+				       dev->name, netdev_drivername(dev, drivername, 64), i);
 				dev->netdev_ops->ndo_tx_timeout(dev);
 			}
 			if (!mod_timer(&dev->watchdog_timer,
@@ -602,8 +622,10 @@ static void transition_one_qdisc(struct net_device *dev,
 		clear_bit(__QDISC_STATE_DEACTIVATED, &new_qdisc->state);
 
 	rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
-	if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
+	if (need_watchdog_p && new_qdisc != &noqueue_qdisc) {
+		dev_queue->trans_start = 0;
 		*need_watchdog_p = 1;
+	}
 }
 
 void dev_activate(struct net_device *dev)
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 5022f9c1f34..362c2811b2d 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -372,7 +372,7 @@ cftree_update(struct hfsc_class *cl)
  *	ism: (psched_us/byte) << ISM_SHIFT
  *	dx: psched_us
  *
- * The clock source resolution with ktime is 1.024us.
+ * The clock source resolution with ktime and PSCHED_SHIFT 10 is 1.024us.
  *
  * sm and ism are scaled in order to keep effective digits.
  * SM_SHIFT and ISM_SHIFT are selected to keep at least 4 effective
@@ -383,9 +383,11 @@ cftree_update(struct hfsc_class *cl)
  *  bytes/1.024us 12.8e-3    128e-3     1280e-3    12800e-3   128000e-3
  *
  *  1.024us/byte  78.125     7.8125     0.78125    0.078125   0.0078125
+ *
+ * So, for PSCHED_SHIFT 10 we need: SM_SHIFT 20, ISM_SHIFT 18.
  */
-#define	SM_SHIFT	20
-#define	ISM_SHIFT	18
+#define	SM_SHIFT	(30 - PSCHED_SHIFT)
+#define	ISM_SHIFT	(8 + PSCHED_SHIFT)
 
 #define	SM_MASK		((1ULL << SM_SHIFT) - 1)
 #define	ISM_MASK	((1ULL << ISM_SHIFT) - 1)
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 33133d27b53..8706920a6d4 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -149,7 +149,7 @@ static unsigned sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb)
 		break;
 	}
 	default:
-		h = (unsigned long)skb->dst ^ skb->protocol;
+		h = (unsigned long)skb_dst(skb) ^ skb->protocol;
 		h2 = (unsigned long)skb->sk;
 	}
 
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 3b641829723..9c002b6e053 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -58,7 +58,6 @@ struct teql_master
 	struct net_device *dev;
 	struct Qdisc *slaves;
 	struct list_head master_list;
-	struct net_device_stats stats;
 };
 
 struct teql_sched_data
@@ -223,7 +222,7 @@ __teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *
 {
 	struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0);
 	struct teql_sched_data *q = qdisc_priv(dev_queue->qdisc);
-	struct neighbour *mn = skb->dst->neighbour;
+	struct neighbour *mn = skb_dst(skb)->neighbour;
 	struct neighbour *n = q->ncache;
 
 	if (mn->tbl == NULL)
@@ -263,8 +262,8 @@ static inline int teql_resolve(struct sk_buff *skb,
 		return -ENODEV;
 
 	if (dev->header_ops == NULL ||
-	    skb->dst == NULL ||
-	    skb->dst->neighbour == NULL)
+	    skb_dst(skb) == NULL ||
+	    skb_dst(skb)->neighbour == NULL)
 		return 0;
 	return __teql_resolve(skb, skb_res, dev);
 }
@@ -272,6 +271,7 @@ static inline int teql_resolve(struct sk_buff *skb,
 static int teql_master_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct teql_master *master = netdev_priv(dev);
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct Qdisc *start, *q;
 	int busy;
 	int nores;
@@ -308,11 +308,12 @@ restart:
 				if (!netif_tx_queue_stopped(slave_txq) &&
 				    !netif_tx_queue_frozen(slave_txq) &&
 				    slave_ops->ndo_start_xmit(skb, slave) == 0) {
+					txq_trans_update(slave_txq);
 					__netif_tx_unlock(slave_txq);
 					master->slaves = NEXT_SLAVE(q);
 					netif_wake_queue(dev);
-					master->stats.tx_packets++;
-					master->stats.tx_bytes += length;
+					txq->tx_packets++;
+					txq->tx_bytes += length;
 					return 0;
 				}
 				__netif_tx_unlock(slave_txq);
@@ -337,12 +338,12 @@ restart:
 
 	if (busy) {
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
-	master->stats.tx_errors++;
+	dev->stats.tx_errors++;
 
 drop:
-	master->stats.tx_dropped++;
+	txq->tx_dropped++;
 	dev_kfree_skb(skb);
 	return 0;
 }
@@ -395,12 +396,6 @@ static int teql_master_close(struct net_device *dev)
 	return 0;
 }
 
-static struct net_device_stats *teql_master_stats(struct net_device *dev)
-{
-	struct teql_master *m = netdev_priv(dev);
-	return &m->stats;
-}
-
 static int teql_master_mtu(struct net_device *dev, int new_mtu)
 {
 	struct teql_master *m = netdev_priv(dev);
@@ -425,7 +420,6 @@ static const struct net_device_ops teql_netdev_ops = {
 	.ndo_open	= teql_master_open,
 	.ndo_stop	= teql_master_close,
 	.ndo_start_xmit	= teql_master_xmit,
-	.ndo_get_stats	= teql_master_stats,
 	.ndo_change_mtu	= teql_master_mtu,
 };
 
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index f4b23043b61..525864bf4f0 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -293,7 +293,8 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
 	 * told otherwise.
 	 */
 	asoc->peer.ipv4_address = 1;
-	asoc->peer.ipv6_address = 1;
+	if (asoc->base.sk->sk_family == PF_INET6)
+		asoc->peer.ipv6_address = 1;
 	INIT_LIST_HEAD(&asoc->asocs);
 
 	asoc->autoclose = sp->autoclose;
@@ -566,6 +567,21 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
 	if (asoc->init_last_sent_to == peer)
 		asoc->init_last_sent_to = NULL;
 
+	/* If we remove the transport an SHUTDOWN was last sent to, set it
+	 * to NULL. Combined with the update of the retran path above, this
+	 * will cause the next SHUTDOWN to be sent to the next available
+	 * transport, maintaining the cycle.
+	 */
+	if (asoc->shutdown_last_sent_to == peer)
+		asoc->shutdown_last_sent_to = NULL;
+
+	/* If we remove the transport an ASCONF was last sent to, set it to
+	 * NULL.
+	 */
+	if (asoc->addip_last_asconf &&
+	    asoc->addip_last_asconf->transport == peer)
+		asoc->addip_last_asconf->transport = NULL;
+
 	asoc->peer.transport_count--;
 
 	sctp_transport_free(peer);
@@ -1268,49 +1284,21 @@ void sctp_assoc_update_retran_path(struct sctp_association *asoc)
 				 ntohs(t->ipaddr.v4.sin_port));
 }
 
-/* Choose the transport for sending a INIT packet.  */
-struct sctp_transport *sctp_assoc_choose_init_transport(
-	struct sctp_association *asoc)
-{
-	struct sctp_transport *t;
-
-	/* Use the retran path. If the last INIT was sent over the
-	 * retran path, update the retran path and use it.
-	 */
-	if (!asoc->init_last_sent_to) {
-		t = asoc->peer.active_path;
-	} else {
-		if (asoc->init_last_sent_to == asoc->peer.retran_path)
-			sctp_assoc_update_retran_path(asoc);
-		t = asoc->peer.retran_path;
-	}
-
-	SCTP_DEBUG_PRINTK_IPADDR("sctp_assoc_update_retran_path:association"
-				 " %p addr: ",
-				 " port: %d\n",
-				 asoc,
-				 (&t->ipaddr),
-				 ntohs(t->ipaddr.v4.sin_port));
-
-	return t;
-}
-
-/* Choose the transport for sending a SHUTDOWN packet.  */
-struct sctp_transport *sctp_assoc_choose_shutdown_transport(
-	struct sctp_association *asoc)
+/* Choose the transport for sending retransmit packet.  */
+struct sctp_transport *sctp_assoc_choose_alter_transport(
+	struct sctp_association *asoc, struct sctp_transport *last_sent_to)
 {
-	/* If this is the first time SHUTDOWN is sent, use the active path,
-	 * else use the retran path. If the last SHUTDOWN was sent over the
+	/* If this is the first time packet is sent, use the active path,
+	 * else use the retran path. If the last packet was sent over the
 	 * retran path, update the retran path and use it.
 	 */
-	if (!asoc->shutdown_last_sent_to)
+	if (!last_sent_to)
 		return asoc->peer.active_path;
 	else {
-		if (asoc->shutdown_last_sent_to == asoc->peer.retran_path)
+		if (last_sent_to == asoc->peer.retran_path)
 			sctp_assoc_update_retran_path(asoc);
 		return asoc->peer.retran_path;
 	}
-
 }
 
 /* Update the association's pmtu and frag_point by going through all the
@@ -1482,6 +1470,10 @@ int sctp_assoc_set_id(struct sctp_association *asoc, gfp_t gfp)
 {
 	int assoc_id;
 	int error = 0;
+
+	/* If the id is already assigned, keep it. */
+	if (asoc->assoc_id)
+		return error;
 retry:
 	if (unlikely(!idr_pre_get(&sctp_assocs_id, gfp)))
 		return -ENOMEM;
diff --git a/net/sctp/input.c b/net/sctp/input.c
index d2e98803ffe..c0c973e67ad 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -81,13 +81,13 @@ static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
 /* Calculate the SCTP checksum of an SCTP packet.  */
 static inline int sctp_rcv_checksum(struct sk_buff *skb)
 {
-	struct sk_buff *list = skb_shinfo(skb)->frag_list;
 	struct sctphdr *sh = sctp_hdr(skb);
 	__le32 cmp = sh->checksum;
+	struct sk_buff *list;
 	__le32 val;
 	__u32 tmp = sctp_start_cksum((__u8 *)sh, skb_headlen(skb));
 
-	for (; list; list = list->next)
+	skb_walk_frags(skb, list)
 		tmp = sctp_update_cksum((__u8 *)list->data, skb_headlen(list),
 					tmp);
 
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 7d08f522ec8..b7641144451 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -405,13 +405,14 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 			sctp_assoc_sync_pmtu(asoc);
 		}
 	}
-	nskb->dst = dst_clone(tp->dst);
-	if (!nskb->dst)
+	dst = dst_clone(tp->dst);
+	skb_dst_set(nskb, dst);
+	if (dst)
 		goto no_route;
-	dst = nskb->dst;
 
 	/* Build the SCTP header.  */
 	sh = (struct sctphdr *)skb_push(nskb, sizeof(struct sctphdr));
+	skb_reset_transport_header(nskb);
 	sh->source = htons(packet->source_port);
 	sh->dest   = htons(packet->destination_port);
 
@@ -527,15 +528,25 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	 * Note: Adler-32 is no longer applicable, as has been replaced
 	 * by CRC32-C as described in <draft-ietf-tsvwg-sctpcsum-02.txt>.
 	 */
-	if (!sctp_checksum_disable && !(dst->dev->features & NETIF_F_NO_CSUM)) {
+	if (!sctp_checksum_disable &&
+	    !(dst->dev->features & (NETIF_F_NO_CSUM | NETIF_F_SCTP_CSUM))) {
 		__u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
 
 		/* 3) Put the resultant value into the checksum field in the
 		 *    common header, and leave the rest of the bits unchanged.
 		 */
 		sh->checksum = sctp_end_cksum(crc32);
-	} else
-		nskb->ip_summed = CHECKSUM_UNNECESSARY;
+	} else {
+		if (dst->dev->features & NETIF_F_SCTP_CSUM) {
+			/* no need to seed psuedo checksum for SCTP */
+			nskb->ip_summed = CHECKSUM_PARTIAL;
+			nskb->csum_start = (skb_transport_header(nskb) -
+			                    nskb->head);
+			nskb->csum_offset = offsetof(struct sctphdr, checksum);
+		} else {
+			nskb->ip_summed = CHECKSUM_UNNECESSARY;
+		}
+	}
 
 	/* IP layer ECN support
 	 * From RFC 2481
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 8eb3e61cb70..79cbd47f4df 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -393,7 +393,7 @@ static int sctp_v4_addr_valid(union sctp_addr *addr,
 		return 0;
 
 	/* Is this a broadcast address? */
-	if (skb && skb->rtable->rt_flags & RTCF_BROADCAST)
+	if (skb && skb_rtable(skb)->rt_flags & RTCF_BROADCAST)
 		return 0;
 
 	return 1;
@@ -572,7 +572,7 @@ static void sctp_v4_get_saddr(struct sctp_sock *sk,
 /* What interface did this skb arrive on? */
 static int sctp_v4_skb_iif(const struct sk_buff *skb)
 {
-	return skb->rtable->rt_iif;
+	return skb_rtable(skb)->rt_iif;
 }
 
 /* Was this packet marked by Explicit Congestion Notification? */
@@ -848,8 +848,8 @@ static inline int sctp_v4_xmit(struct sk_buff *skb,
 
 	SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, src:%pI4, dst:%pI4\n",
 			  __func__, skb, skb->len,
-			  &skb->rtable->rt_src,
-			  &skb->rtable->rt_dst);
+			  &skb_rtable(skb)->rt_src,
+			  &skb_rtable(skb)->rt_dst);
 
 	inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
 			 IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
@@ -1370,6 +1370,8 @@ SCTP_STATIC __exit void sctp_exit(void)
 	sctp_proc_exit();
 	cleanup_sctp_mibs();
 
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
 	kmem_cache_destroy(sctp_chunk_cachep);
 	kmem_cache_destroy(sctp_bucket_cachep);
 }
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 6851ee94e97..61cc6075b0d 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2864,19 +2864,19 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	switch (addr_param->v4.param_hdr.type) {
 	case SCTP_PARAM_IPV6_ADDRESS:
 		if (!asoc->peer.ipv6_address)
-			return SCTP_ERROR_INV_PARAM;
+			return SCTP_ERROR_DNS_FAILED;
 		break;
 	case SCTP_PARAM_IPV4_ADDRESS:
 		if (!asoc->peer.ipv4_address)
-			return SCTP_ERROR_INV_PARAM;
+			return SCTP_ERROR_DNS_FAILED;
 		break;
 	default:
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_DNS_FAILED;
 	}
 
 	af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
 	if (unlikely(!af))
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_DNS_FAILED;
 
 	af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0);
 
@@ -2886,7 +2886,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	 *  make sure we check for that)
 	 */
 	if (!af->is_any(&addr) && !af->addr_valid(&addr, NULL, asconf->skb))
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_DNS_FAILED;
 
 	switch (asconf_param->param_hdr.type) {
 	case SCTP_PARAM_ADD_IP:
@@ -2954,12 +2954,12 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 
 		peer = sctp_assoc_lookup_paddr(asoc, &addr);
 		if (!peer)
-			return SCTP_ERROR_INV_PARAM;
+			return SCTP_ERROR_DNS_FAILED;
 
 		sctp_assoc_set_primary(asoc, peer);
 		break;
 	default:
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_UNKNOWN_PARAM;
 		break;
 	}
 
@@ -3273,7 +3273,7 @@ int sctp_process_asconf_ack(struct sctp_association *asoc,
 			retval = 1;
 			break;
 
-		case SCTP_ERROR_INV_PARAM:
+		case SCTP_ERROR_UNKNOWN_PARAM:
 			/* Disable sending this type of asconf parameter in
 			 * future.
 			 */
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index e2020eb2c8c..86426aac160 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -686,7 +686,8 @@ static void sctp_cmd_setup_t2(sctp_cmd_seq_t *cmds,
 {
 	struct sctp_transport *t;
 
-	t = sctp_assoc_choose_shutdown_transport(asoc);
+	t = sctp_assoc_choose_alter_transport(asoc,
+					      asoc->shutdown_last_sent_to);
 	asoc->shutdown_last_sent_to = t;
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_T2_SHUTDOWN] = t->rto;
 	chunk->transport = t;
@@ -777,7 +778,7 @@ static void sctp_cmd_setup_t4(sctp_cmd_seq_t *cmds,
 {
 	struct sctp_transport *t;
 
-	t = asoc->peer.active_path;
+	t = sctp_assoc_choose_alter_transport(asoc, chunk->transport);
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_T4_RTO] = t->rto;
 	chunk->transport = t;
 }
@@ -1379,7 +1380,8 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
 
 		case SCTP_CMD_INIT_CHOOSE_TRANSPORT:
 			chunk = cmd->obj.ptr;
-			t = sctp_assoc_choose_init_transport(asoc);
+			t = sctp_assoc_choose_alter_transport(asoc,
+						asoc->init_last_sent_to);
 			asoc->init_last_sent_to = t;
 			chunk->transport = t;
 			t->init_sent_count++;
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 55a61aa6966..7288192f7df 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -5432,9 +5432,13 @@ sctp_disposition_t sctp_sf_t2_timer_expire(const struct sctp_endpoint *ep,
 	if (!reply)
 		goto nomem;
 
-	/* Do some failure management (Section 8.2). */
-	sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
-			SCTP_TRANSPORT(asoc->shutdown_last_sent_to));
+	/* Do some failure management (Section 8.2).
+	 * If we remove the transport an SHUTDOWN was last sent to, don't
+	 * do failure management.
+	 */
+	if (asoc->shutdown_last_sent_to)
+		sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
+				SCTP_TRANSPORT(asoc->shutdown_last_sent_to));
 
 	/* Set the transport for the SHUTDOWN/ACK chunk and the timeout for
 	 * the T2-shutdown timer.
@@ -5471,7 +5475,9 @@ sctp_disposition_t sctp_sf_t4_timer_expire(
 	 * detection on the appropriate destination address as defined in
 	 * RFC2960 [5] section 8.1 and 8.2.
 	 */
-	sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE, SCTP_TRANSPORT(transport));
+	if (transport)
+		sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
+				SCTP_TRANSPORT(transport));
 
 	/* Reconfig T4 timer and transport. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_SETUP_T4, SCTP_CHUNK(chunk));
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index 5c8186d88c6..6d9b3aafcc5 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -698,7 +698,7 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 	TYPE_SCTP_FUNC(sctp_sf_do_prm_asconf), \
 	/* SCTP_STATE_SHUTDOWN_ACK_SENT */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_shutdown), \
-} /* TYPE_SCTP_PRIMITIVE_REQUESTHEARTBEAT */
+} /* TYPE_SCTP_PRIMITIVE_ASCONF */
 
 /* The primary index for this table is the primitive type.
  * The secondary index for this table is the state.
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 5fb3a8c9792..0f01e5d8a24 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1100,6 +1100,15 @@ static int __sctp_connect(struct sock* sk,
 		goto out_free;
 	}
 
+	/* In case the user of sctp_connectx() wants an association
+	 * id back, assign one now.
+	 */
+	if (assoc_id) {
+		err = sctp_assoc_set_id(asoc, GFP_KERNEL);
+		if (err < 0)
+			goto out_free;
+	}
+
 	err = sctp_primitive_ASSOCIATE(asoc, NULL);
 	if (err < 0) {
 		goto out_free;
@@ -1120,7 +1129,7 @@ static int __sctp_connect(struct sock* sk,
 	timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK);
 
 	err = sctp_wait_for_connect(asoc, &timeo);
-	if (!err && assoc_id)
+	if ((err == 0 || err == -EINPROGRESS) && assoc_id)
 		*assoc_id = asoc->assoc_id;
 
 	/* Don't free association on exit. */
@@ -1264,6 +1273,34 @@ SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk,
 		return assoc_id;
 }
 
+/*
+ * New (hopefully final) interface for the API.  The option buffer is used
+ * both for the returned association id and the addresses.
+ */
+SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len,
+					char __user *optval,
+					int __user *optlen)
+{
+	sctp_assoc_t assoc_id = 0;
+	int err = 0;
+
+	if (len < sizeof(assoc_id))
+		return -EINVAL;
+
+	err = __sctp_setsockopt_connectx(sk,
+			(struct sockaddr __user *)(optval + sizeof(assoc_id)),
+			len - sizeof(assoc_id), &assoc_id);
+
+	if (err == 0 || err == -EINPROGRESS) {
+		if (copy_to_user(optval, &assoc_id, sizeof(assoc_id)))
+			return -EFAULT;
+		if (put_user(sizeof(assoc_id), optlen))
+			return -EFAULT;
+	}
+
+	return err;
+}
+
 /* API 3.1.4 close() - UDP Style Syntax
  * Applications use close() to perform graceful shutdown (as described in
  * Section 10.1 of [SCTP]) on ALL the associations currently represented
@@ -1844,7 +1881,7 @@ static int sctp_skb_pull(struct sk_buff *skb, int len)
 	len -= skb_len;
 	__skb_pull(skb, skb_len);
 
-	for (list = skb_shinfo(skb)->frag_list; list; list = list->next) {
+	skb_walk_frags(skb, list) {
 		rlen = sctp_skb_pull(list, len);
 		skb->len -= (len-rlen);
 		skb->data_len -= (len-rlen);
@@ -5578,6 +5615,9 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname,
 		retval = sctp_getsockopt_local_addrs(sk, len, optval,
 						     optlen);
 		break;
+	case SCTP_SOCKOPT_CONNECTX3:
+		retval = sctp_getsockopt_connectx3(sk, len, optval, optlen);
+		break;
 	case SCTP_DEFAULT_SEND_PARAM:
 		retval = sctp_getsockopt_default_send_param(sk, len,
 							    optval, optlen);
@@ -6620,7 +6660,7 @@ static void sctp_sock_rfree_frag(struct sk_buff *skb)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next)
+	skb_walk_frags(skb, frag)
 		sctp_sock_rfree_frag(frag);
 
 done:
@@ -6635,7 +6675,7 @@ static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next)
+	skb_walk_frags(skb, frag)
 		sctp_skb_set_owner_r_frag(frag, sk);
 
 done:
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index f58e994e685..63eabbc7129 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -49,8 +49,8 @@ static int zero = 0;
 static int one = 1;
 static int timer_max = 86400000; /* ms in one day */
 static int int_max = INT_MAX;
-static long sack_timer_min = 1;
-static long sack_timer_max = 500;
+static int sack_timer_min = 1;
+static int sack_timer_max = 500;
 
 extern int sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
@@ -223,7 +223,7 @@ static ctl_table sctp_table[] = {
 		.ctl_name	= NET_SCTP_SACK_TIMEOUT,
 		.procname	= "sack_timeout",
 		.data		= &sctp_sack_timeout,
-		.maxlen		= sizeof(long),
+		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
 		.strategy	= sysctl_intvec,
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 5f186ca550d..8b3560fd876 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -976,9 +976,8 @@ static void sctp_ulpevent_receive_data(struct sctp_ulpevent *event,
 	 * In general, the skb passed from IP can have only 1 level of
 	 * fragments. But we allow multiple levels of fragments.
 	 */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+	skb_walk_frags(skb, frag)
 		sctp_ulpevent_receive_data(sctp_skb2event(frag), asoc);
-	}
 }
 
 /* Do accounting for bytes just read by user and release the references to
@@ -1003,7 +1002,7 @@ static void sctp_ulpevent_release_data(struct sctp_ulpevent *event)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+	skb_walk_frags(skb, frag) {
 		/* NOTE:  skb_shinfos are recursive. Although IP returns
 		 * skb's with only 1 level of fragments, SCTP reassembly can
 		 * increase the levels.
@@ -1026,7 +1025,7 @@ static void sctp_ulpevent_release_frag_data(struct sctp_ulpevent *event)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+	skb_walk_frags(skb, frag) {
 		/* NOTE:  skb_shinfos are recursive. Although IP returns
 		 * skb's with only 1 level of fragments, SCTP reassembly can
 		 * increase the levels.
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index e630b38a604..66d458fc692 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1548,6 +1548,7 @@ static void __exit exit_rpcsec_gss(void)
 {
 	gss_svc_shutdown();
 	rpcauth_unregister(&authgss_ops);
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 MODULE_LICENSE("GPL");
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index e1859614601..6c2d6158655 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -918,7 +918,7 @@ static void xs_udp_data_ready(struct sock *sk, int len)
 	UDPX_INC_STATS_BH(sk, UDP_MIB_INDATAGRAMS);
 
 	/* Something worked... */
-	dst_confirm(skb->dst);
+	dst_confirm(skb_dst(skb));
 
 	xprt_adjust_cwnd(task, copied);
 	xprt_update_rtt(task);
diff --git a/net/tipc/eth_media.c b/net/tipc/eth_media.c
index f72ba774c24..524ba5696d4 100644
--- a/net/tipc/eth_media.c
+++ b/net/tipc/eth_media.c
@@ -167,7 +167,7 @@ static int enable_bearer(struct tipc_bearer *tb_ptr)
 	tb_ptr->mtu = dev->mtu;
 	tb_ptr->blocked = 0;
 	tb_ptr->addr.type = htonl(TIPC_MEDIA_TYPE_ETH);
-	memcpy(&tb_ptr->addr.dev_addr, &dev->dev_addr, ETH_ALEN);
+	memcpy(&tb_ptr->addr.dev_addr, dev->dev_addr, ETH_ALEN);
 	return 0;
 }
 
diff --git a/net/tipc/netlink.c b/net/tipc/netlink.c
index c387217bb23..3c57005e44d 100644
--- a/net/tipc/netlink.c
+++ b/net/tipc/netlink.c
@@ -68,7 +68,7 @@ static int handle_cmd(struct sk_buff *skb, struct genl_info *info)
 	return 0;
 }
 
-static struct genl_family family = {
+static struct genl_family tipc_genl_family = {
 	.id		= GENL_ID_GENERATE,
 	.name		= TIPC_GENL_NAME,
 	.version	= TIPC_GENL_VERSION,
@@ -76,39 +76,33 @@ static struct genl_family family = {
 	.maxattr	= 0,
 };
 
-static struct genl_ops ops = {
+static struct genl_ops tipc_genl_ops = {
 	.cmd		= TIPC_GENL_CMD,
 	.doit		= handle_cmd,
 };
 
-static int family_registered = 0;
+static int tipc_genl_family_registered;
 
 int tipc_netlink_start(void)
 {
+	int res;
 
+	res = genl_register_family_with_ops(&tipc_genl_family,
+		&tipc_genl_ops, 1);
+	if (res) {
+		err("Failed to register netlink interface\n");
+		return res;
+	}
 
-	if (genl_register_family(&family))
-		goto err;
-
-	family_registered = 1;
-
-	if (genl_register_ops(&family, &ops))
-		goto err_unregister;
-
+	tipc_genl_family_registered = 1;
 	return 0;
-
- err_unregister:
-	genl_unregister_family(&family);
-	family_registered = 0;
- err:
-	err("Failed to register netlink interface\n");
-	return -EFAULT;
 }
 
 void tipc_netlink_stop(void)
 {
-	if (family_registered) {
-		genl_unregister_family(&family);
-		family_registered = 0;
-	}
+	if (!tipc_genl_family_registered)
+		return;
+
+	genl_unregister_family(&tipc_genl_family);
+	tipc_genl_family_registered = 0;
 }
diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig
index 1b46747a5f5..e4d97ab476d 100644
--- a/net/wimax/Kconfig
+++ b/net/wimax/Kconfig
@@ -1,23 +1,10 @@
 #
 # WiMAX LAN device configuration
 #
-# Note the ugly 'depends on' on WIMAX: that disallows RFKILL to be a
-# module if WIMAX is to be linked in. The WiMAX code is done in such a
-# way that it doesn't require and explicit dependency on RFKILL in
-# case an embedded system wants to rip it out.
-#
-# As well, enablement of the RFKILL code means we need the INPUT layer
-# support to inject events coming from hw rfkill switches. That
-# dependency could be killed if input.h provided appropriate means to
-# work when input is disabled.
-
-comment "WiMAX Wireless Broadband support requires CONFIG_INPUT enabled"
-	depends on INPUT = n && RFKILL != n
 
 menuconfig WIMAX
 	tristate "WiMAX Wireless Broadband support"
-	depends on (y && RFKILL != m) || m
-	depends on (INPUT && RFKILL != n) || RFKILL = n
+	depends on RFKILL || !RFKILL
 	help
 
 	  Select to configure support for devices that provide
diff --git a/net/wimax/Makefile b/net/wimax/Makefile
index 5b80b941c2c..8f1510d0cc2 100644
--- a/net/wimax/Makefile
+++ b/net/wimax/Makefile
@@ -6,6 +6,7 @@ wimax-y :=		\
 	op-msg.o	\
 	op-reset.o	\
 	op-rfkill.o	\
+	op-state-get.o	\
 	stack.o
 
 wimax-$(CONFIG_DEBUG_FS) += debugfs.o
diff --git a/net/wimax/debug-levels.h b/net/wimax/debug-levels.h
index 1c29123a3aa..0975adba6b7 100644
--- a/net/wimax/debug-levels.h
+++ b/net/wimax/debug-levels.h
@@ -36,6 +36,7 @@ enum d_module {
 	D_SUBMODULE_DECLARE(op_msg),
 	D_SUBMODULE_DECLARE(op_reset),
 	D_SUBMODULE_DECLARE(op_rfkill),
+	D_SUBMODULE_DECLARE(op_state_get),
 	D_SUBMODULE_DECLARE(stack),
 };
 
diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c
index 94d216a4640..6c9bedb7431 100644
--- a/net/wimax/debugfs.c
+++ b/net/wimax/debugfs.c
@@ -61,6 +61,7 @@ int wimax_debugfs_add(struct wimax_dev *wimax_dev)
 	__debugfs_register("wimax_dl_", op_msg, dentry);
 	__debugfs_register("wimax_dl_", op_reset, dentry);
 	__debugfs_register("wimax_dl_", op_rfkill, dentry);
+	__debugfs_register("wimax_dl_", op_state_get, dentry);
 	__debugfs_register("wimax_dl_", stack, dentry);
 	result = 0;
 out:
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index 9ad4d893a56..d631a17186b 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -108,6 +108,12 @@
  * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
  * wimax_msg_send() depends on skb->data being placed at the
  * beginning of the user message.
+ *
+ * Unlike other WiMAX stack calls, this call can be used way early,
+ * even before wimax_dev_add() is called, as long as the
+ * wimax_dev->net_dev pointer is set to point to a proper
+ * net_dev. This is so that drivers can use it early in case they need
+ * to send stuff around or communicate with user space.
  */
 struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
 				const char *pipe_name,
@@ -115,7 +121,7 @@ struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
 				gfp_t gfp_flags)
 {
 	int result;
-	struct device *dev = wimax_dev->net_dev->dev.parent;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	size_t msg_size;
 	void *genl_msg;
 	struct sk_buff *skb;
@@ -161,7 +167,6 @@ error_genlmsg_put:
 error_new:
 	nlmsg_free(skb);
 	return ERR_PTR(result);
-
 }
 EXPORT_SYMBOL_GPL(wimax_msg_alloc);
 
@@ -256,10 +261,16 @@ EXPORT_SYMBOL_GPL(wimax_msg_len);
  * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
  * wimax_msg_send() depends on skb->data being placed at the
  * beginning of the user message.
+ *
+ * Unlike other WiMAX stack calls, this call can be used way early,
+ * even before wimax_dev_add() is called, as long as the
+ * wimax_dev->net_dev pointer is set to point to a proper
+ * net_dev. This is so that drivers can use it early in case they need
+ * to send stuff around or communicate with user space.
  */
 int wimax_msg_send(struct wimax_dev *wimax_dev, struct sk_buff *skb)
 {
-	struct device *dev = wimax_dev->net_dev->dev.parent;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	void *msg = skb->data;
 	size_t size = skb->len;
 	might_sleep();
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 2b75aee0421..70ef4df863b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -29,8 +29,8 @@
  * A non-polled generic rfkill device is embedded into the WiMAX
  * subsystem's representation of a device.
  *
- * FIXME: Need polled support? use a timer or add the implementation
- *     to the stack.
+ * FIXME: Need polled support? Let drivers provide a poll routine
+ *	  and hand it to rfkill ops then?
  *
  * All device drivers have to do is after wimax_dev_init(), call
  * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update
@@ -43,7 +43,7 @@
  *   wimax_rfkill()             Kernel calling wimax_rfkill()
  *     __wimax_rf_toggle_radio()
  *
- * wimax_rfkill_toggle_radio()  RF-Kill subsytem calling
+ * wimax_rfkill_set_radio_block()  RF-Kill subsytem calling
  *   __wimax_rf_toggle_radio()
  *
  * __wimax_rf_toggle_radio()
@@ -65,15 +65,11 @@
 #include <linux/wimax.h>
 #include <linux/security.h>
 #include <linux/rfkill.h>
-#include <linux/input.h>
 #include "wimax-internal.h"
 
 #define D_SUBMODULE op_rfkill
 #include "debug-levels.h"
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-
-
 /**
  * wimax_report_rfkill_hw - Reports changes in the hardware RF switch
  *
@@ -99,7 +95,6 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
 	int result;
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	enum wimax_st wimax_state;
-	enum rfkill_state rfkill_state;
 
 	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
 	BUG_ON(state == WIMAX_RF_QUERY);
@@ -112,16 +107,16 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
 
 	if (state != wimax_dev->rf_hw) {
 		wimax_dev->rf_hw = state;
-		rfkill_state = state == WIMAX_RF_ON ?
-			RFKILL_STATE_OFF : RFKILL_STATE_ON;
 		if (wimax_dev->rf_hw == WIMAX_RF_ON
 		    && wimax_dev->rf_sw == WIMAX_RF_ON)
 			wimax_state = WIMAX_ST_READY;
 		else
 			wimax_state = WIMAX_ST_RADIO_OFF;
+
+		result = rfkill_set_hw_state(wimax_dev->rfkill,
+					     state == WIMAX_RF_OFF);
+
 		__wimax_state_change(wimax_dev, wimax_state);
-		input_report_key(wimax_dev->rfkill_input, KEY_WIMAX,
-				 rfkill_state);
 	}
 error_not_ready:
 	mutex_unlock(&wimax_dev->mutex);
@@ -174,6 +169,7 @@ void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
 		else
 			wimax_state = WIMAX_ST_RADIO_OFF;
 		__wimax_state_change(wimax_dev, wimax_state);
+		rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
 	}
 error_not_ready:
 	mutex_unlock(&wimax_dev->mutex);
@@ -249,36 +245,31 @@ out_no_change:
  *
  * NOTE: This call will block until the operation is completed.
  */
-static
-int wimax_rfkill_toggle_radio(void *data, enum rfkill_state state)
+static int wimax_rfkill_set_radio_block(void *data, bool blocked)
 {
 	int result;
 	struct wimax_dev *wimax_dev = data;
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	enum wimax_rf_state rf_state;
 
-	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
-	switch (state) {
-	case RFKILL_STATE_ON:
+	d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked);
+	rf_state = WIMAX_RF_ON;
+	if (blocked)
 		rf_state = WIMAX_RF_OFF;
-		break;
-	case RFKILL_STATE_OFF:
-		rf_state = WIMAX_RF_ON;
-		break;
-	default:
-		BUG();
-	}
 	mutex_lock(&wimax_dev->mutex);
 	if (wimax_dev->state <= __WIMAX_ST_QUIESCING)
-		result = 0;	/* just pretend it didn't happen */
+		result = 0;
 	else
 		result = __wimax_rf_toggle_radio(wimax_dev, rf_state);
 	mutex_unlock(&wimax_dev->mutex);
-	d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
-		wimax_dev, state, result);
+	d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n",
+		wimax_dev, blocked, result);
 	return result;
 }
 
+static const struct rfkill_ops wimax_rfkill_ops = {
+	.set_block = wimax_rfkill_set_radio_block,
+};
 
 /**
  * wimax_rfkill - Set the software RF switch state for a WiMAX device
@@ -322,6 +313,7 @@ int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state)
 		result = __wimax_rf_toggle_radio(wimax_dev, state);
 		if (result < 0)
 			goto error;
+		rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
 		break;
 	case WIMAX_RF_QUERY:
 		break;
@@ -349,41 +341,20 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev)
 {
 	int result;
 	struct rfkill *rfkill;
-	struct input_dev *input_dev;
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 
 	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
 	/* Initialize RF Kill */
 	result = -ENOMEM;
-	rfkill = rfkill_allocate(dev, RFKILL_TYPE_WIMAX);
+	rfkill = rfkill_alloc(wimax_dev->name, dev, RFKILL_TYPE_WIMAX,
+			      &wimax_rfkill_ops, wimax_dev);
 	if (rfkill == NULL)
 		goto error_rfkill_allocate;
+
+	d_printf(1, dev, "rfkill %p\n", rfkill);
+
 	wimax_dev->rfkill = rfkill;
 
-	rfkill->name = wimax_dev->name;
-	rfkill->state = RFKILL_STATE_OFF;
-	rfkill->data = wimax_dev;
-	rfkill->toggle_radio = wimax_rfkill_toggle_radio;
-	rfkill->user_claim_unsupported = 1;
-
-	/* Initialize the input device for the hw key */
-	input_dev = input_allocate_device();
-	if (input_dev == NULL)
-		goto error_input_allocate;
-	wimax_dev->rfkill_input = input_dev;
-	d_printf(1, dev, "rfkill %p input %p\n", rfkill, input_dev);
-
-	input_dev->name = wimax_dev->name;
-	/* FIXME: get a real device bus ID and stuff? do we care? */
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor = 0xffff;
-	input_dev->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_WIMAX, input_dev->keybit);
-
-	/* Register both */
-	result = input_register_device(wimax_dev->rfkill_input);
-	if (result < 0)
-		goto error_input_register;
 	result = rfkill_register(wimax_dev->rfkill);
 	if (result < 0)
 		goto error_rfkill_register;
@@ -395,17 +366,8 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev)
 	d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev);
 	return 0;
 
-	/* if rfkill_register() suceeds, can't use rfkill_free() any
-	 * more, only rfkill_unregister() [it owns the refcount]; with
-	 * the input device we have the same issue--hence the if. */
 error_rfkill_register:
-	input_unregister_device(wimax_dev->rfkill_input);
-	wimax_dev->rfkill_input = NULL;
-error_input_register:
-	if (wimax_dev->rfkill_input)
-		input_free_device(wimax_dev->rfkill_input);
-error_input_allocate:
-	rfkill_free(wimax_dev->rfkill);
+	rfkill_destroy(wimax_dev->rfkill);
 error_rfkill_allocate:
 	d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
 	return result;
@@ -424,45 +386,12 @@ void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
 {
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
-	rfkill_unregister(wimax_dev->rfkill);	/* frees */
-	input_unregister_device(wimax_dev->rfkill_input);
+	rfkill_unregister(wimax_dev->rfkill);
+	rfkill_destroy(wimax_dev->rfkill);
 	d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev);
 }
 
 
-#else /* #ifdef CONFIG_RFKILL */
-
-void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
-			    enum wimax_rf_state state)
-{
-}
-EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
-
-void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
-			    enum wimax_rf_state state)
-{
-}
-EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw);
-
-int wimax_rfkill(struct wimax_dev *wimax_dev,
-		 enum wimax_rf_state state)
-{
-	return WIMAX_RF_ON << 1 | WIMAX_RF_ON;
-}
-EXPORT_SYMBOL_GPL(wimax_rfkill);
-
-int wimax_rfkill_add(struct wimax_dev *wimax_dev)
-{
-	return 0;
-}
-
-void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
-{
-}
-
-#endif /* #ifdef CONFIG_RFKILL */
-
-
 /*
  * Exporting to user space over generic netlink
  *
diff --git a/net/wimax/op-state-get.c b/net/wimax/op-state-get.c
new file mode 100644
index 00000000000..a76b8fcb056
--- /dev/null
+++ b/net/wimax/op-state-get.c
@@ -0,0 +1,86 @@
+/*
+ * Linux WiMAX
+ * Implement and export a method for getting a WiMAX device current state
+ *
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on previous WiMAX core work by:
+ *  Copyright (C) 2008 Intel Corporation <linux-wimax@intel.com>
+ *  Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <net/wimax.h>
+#include <net/genetlink.h>
+#include <linux/wimax.h>
+#include <linux/security.h>
+#include "wimax-internal.h"
+
+#define D_SUBMODULE op_state_get
+#include "debug-levels.h"
+
+
+static const
+struct nla_policy wimax_gnl_state_get_policy[WIMAX_GNL_ATTR_MAX + 1] = {
+	[WIMAX_GNL_STGET_IFIDX] = {
+		.type = NLA_U32,
+	},
+};
+
+
+/*
+ * Exporting to user space over generic netlink
+ *
+ * Parse the state get command from user space, return a combination
+ * value that describe the current state.
+ *
+ * No attributes.
+ */
+static
+int wimax_gnl_doit_state_get(struct sk_buff *skb, struct genl_info *info)
+{
+	int result, ifindex;
+	struct wimax_dev *wimax_dev;
+	struct device *dev;
+
+	d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
+	result = -ENODEV;
+	if (info->attrs[WIMAX_GNL_STGET_IFIDX] == NULL) {
+		printk(KERN_ERR "WIMAX_GNL_OP_STATE_GET: can't find IFIDX "
+			"attribute\n");
+		goto error_no_wimax_dev;
+	}
+	ifindex = nla_get_u32(info->attrs[WIMAX_GNL_STGET_IFIDX]);
+	wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
+	if (wimax_dev == NULL)
+		goto error_no_wimax_dev;
+	dev = wimax_dev_to_dev(wimax_dev);
+	/* Execute the operation and send the result back to user space */
+	result = wimax_state_get(wimax_dev);
+	dev_put(wimax_dev->net_dev);
+error_no_wimax_dev:
+	d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
+	return result;
+}
+
+
+struct genl_ops wimax_gnl_state_get = {
+	.cmd = WIMAX_GNL_OP_STATE_GET,
+	.flags = GENL_ADMIN_PERM,
+	.policy = wimax_gnl_state_get_policy,
+	.doit = wimax_gnl_doit_state_get,
+	.dumpit = NULL,
+};
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index 933e1422b09..79fb7d7c640 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -402,13 +402,15 @@ EXPORT_SYMBOL_GPL(wimax_dev_init);
 extern struct genl_ops
 	wimax_gnl_msg_from_user,
 	wimax_gnl_reset,
-	wimax_gnl_rfkill;
+	wimax_gnl_rfkill,
+	wimax_gnl_state_get;
 
 static
 struct genl_ops *wimax_gnl_ops[] = {
 	&wimax_gnl_msg_from_user,
 	&wimax_gnl_reset,
 	&wimax_gnl_rfkill,
+	&wimax_gnl_state_get,
 };
 
 
@@ -533,6 +535,7 @@ struct d_level D_LEVEL[] = {
 	D_SUBMODULE_DEFINE(op_msg),
 	D_SUBMODULE_DEFINE(op_reset),
 	D_SUBMODULE_DEFINE(op_rfkill),
+	D_SUBMODULE_DEFINE(op_state_get),
 	D_SUBMODULE_DEFINE(stack),
 };
 size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 3c3bc9e579e..4428dd5e911 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,5 +1,6 @@
 config CFG80211
-        tristate "Improved wireless configuration API"
+	tristate "Improved wireless configuration API"
+	depends on RFKILL || !RFKILL
 
 config CFG80211_REG_DEBUG
 	bool "cfg80211 regulatory debugging"
@@ -10,6 +11,14 @@ config CFG80211_REG_DEBUG
 
 	  If unsure, say N.
 
+config CFG80211_DEBUGFS
+	bool "cfg80211 DebugFS entries"
+	depends on CFG80211 && DEBUG_FS
+	---help---
+	  You can enable this if you want to debugfs entries for cfg80211.
+
+	  If unsure, say N.
+
 config WIRELESS_OLD_REGULATORY
 	bool "Old wireless static regulatory definitions"
 	default n
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 6d1e7b27b75..f78c4832a9c 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -5,7 +5,8 @@ obj-$(CONFIG_LIB80211_CRYPT_WEP) += lib80211_crypt_wep.o
 obj-$(CONFIG_LIB80211_CRYPT_CCMP) += lib80211_crypt_ccmp.o
 obj-$(CONFIG_LIB80211_CRYPT_TKIP) += lib80211_crypt_tkip.o
 
-cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o mlme.o
+cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o mlme.o ibss.o
+cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_WIRELESS_EXT) += wext-compat.o
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/net/wireless/core.c b/net/wireless/core.c
index d1f556535f6..d5850292b3d 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1,7 +1,7 @@
 /*
  * This is the linux wireless configuration interface.
  *
- * Copyright 2006-2008		Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2009		Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/if.h>
@@ -12,12 +12,13 @@
 #include <linux/debugfs.h>
 #include <linux/notifier.h>
 #include <linux/device.h>
+#include <linux/rtnetlink.h>
 #include <net/genetlink.h>
 #include <net/cfg80211.h>
-#include <net/wireless.h>
 #include "nl80211.h"
 #include "core.h"
 #include "sysfs.h"
+#include "debugfs.h"
 
 /* name for sysfs, %d is appended */
 #define PHY_NAME "phy"
@@ -227,9 +228,44 @@ int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
 	return 0;
 }
 
+static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
+{
+	struct cfg80211_registered_device *drv = data;
+
+	drv->ops->rfkill_poll(&drv->wiphy);
+}
+
+static int cfg80211_rfkill_set_block(void *data, bool blocked)
+{
+	struct cfg80211_registered_device *drv = data;
+	struct wireless_dev *wdev;
+
+	if (!blocked)
+		return 0;
+
+	rtnl_lock();
+	mutex_lock(&drv->devlist_mtx);
+
+	list_for_each_entry(wdev, &drv->netdev_list, list)
+		dev_close(wdev->netdev);
+
+	mutex_unlock(&drv->devlist_mtx);
+	rtnl_unlock();
+
+	return 0;
+}
+
+static void cfg80211_rfkill_sync_work(struct work_struct *work)
+{
+	struct cfg80211_registered_device *drv;
+
+	drv = container_of(work, struct cfg80211_registered_device, rfkill_sync);
+	cfg80211_rfkill_set_block(drv, rfkill_blocked(drv->rfkill));
+}
+
 /* exported functions */
 
-struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv)
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 {
 	static int wiphy_counter;
 
@@ -274,6 +310,28 @@ struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv)
 	drv->wiphy.dev.class = &ieee80211_class;
 	drv->wiphy.dev.platform_data = drv;
 
+	drv->rfkill_ops.set_block = cfg80211_rfkill_set_block;
+	drv->rfkill = rfkill_alloc(dev_name(&drv->wiphy.dev),
+				   &drv->wiphy.dev, RFKILL_TYPE_WLAN,
+				   &drv->rfkill_ops, drv);
+
+	if (!drv->rfkill) {
+		kfree(drv);
+		return NULL;
+	}
+
+	INIT_WORK(&drv->rfkill_sync, cfg80211_rfkill_sync_work);
+
+	/*
+	 * Initialize wiphy parameters to IEEE 802.11 MIB default values.
+	 * Fragmentation and RTS threshold are disabled by default with the
+	 * special -1 value.
+	 */
+	drv->wiphy.retry_short = 7;
+	drv->wiphy.retry_long = 4;
+	drv->wiphy.frag_threshold = (u32) -1;
+	drv->wiphy.rts_threshold = (u32) -1;
+
 	return &drv->wiphy;
 }
 EXPORT_SYMBOL(wiphy_new);
@@ -337,17 +395,23 @@ int wiphy_register(struct wiphy *wiphy)
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
 
+	res = device_add(&drv->wiphy.dev);
+	if (res)
+		return res;
+
+	res = rfkill_register(drv->rfkill);
+	if (res)
+		goto out_rm_dev;
+
 	mutex_lock(&cfg80211_mutex);
 
 	/* set up regulatory info */
 	wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
 
-	res = device_add(&drv->wiphy.dev);
-	if (res)
-		goto out_unlock;
-
 	list_add(&drv->list, &cfg80211_drv_list);
 
+	mutex_unlock(&cfg80211_mutex);
+
 	/* add to debugfs */
 	drv->wiphy.debugfsdir =
 		debugfs_create_dir(wiphy_name(&drv->wiphy),
@@ -366,17 +430,41 @@ int wiphy_register(struct wiphy *wiphy)
 		nl80211_send_reg_change_event(&request);
 	}
 
-	res = 0;
-out_unlock:
-	mutex_unlock(&cfg80211_mutex);
+	cfg80211_debugfs_drv_add(drv);
+
+	return 0;
+
+ out_rm_dev:
+	device_del(&drv->wiphy.dev);
 	return res;
 }
 EXPORT_SYMBOL(wiphy_register);
 
+void wiphy_rfkill_start_polling(struct wiphy *wiphy)
+{
+	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+
+	if (!drv->ops->rfkill_poll)
+		return;
+	drv->rfkill_ops.poll = cfg80211_rfkill_poll;
+	rfkill_resume_polling(drv->rfkill);
+}
+EXPORT_SYMBOL(wiphy_rfkill_start_polling);
+
+void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
+{
+	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+
+	rfkill_pause_polling(drv->rfkill);
+}
+EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
+
 void wiphy_unregister(struct wiphy *wiphy)
 {
 	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
 
+	rfkill_unregister(drv->rfkill);
+
 	/* protect the device list */
 	mutex_lock(&cfg80211_mutex);
 
@@ -396,6 +484,8 @@ void wiphy_unregister(struct wiphy *wiphy)
 	/* unlock again before freeing */
 	mutex_unlock(&drv->mtx);
 
+	cfg80211_debugfs_drv_del(drv);
+
 	/* If this device got a regulatory hint tell core its
 	 * free to listen now to a new shiny device regulatory hint */
 	reg_device_remove(wiphy);
@@ -411,6 +501,7 @@ EXPORT_SYMBOL(wiphy_unregister);
 void cfg80211_dev_free(struct cfg80211_registered_device *drv)
 {
 	struct cfg80211_internal_bss *scan, *tmp;
+	rfkill_destroy(drv->rfkill);
 	mutex_destroy(&drv->mtx);
 	mutex_destroy(&drv->devlist_mtx);
 	list_for_each_entry_safe(scan, tmp, &drv->bss_list, list)
@@ -424,6 +515,15 @@ void wiphy_free(struct wiphy *wiphy)
 }
 EXPORT_SYMBOL(wiphy_free);
 
+void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
+{
+	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+
+	if (rfkill_set_hw_state(drv->rfkill, blocked))
+		schedule_work(&drv->rfkill_sync);
+}
+EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
+
 static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 					 unsigned long state,
 					 void *ndev)
@@ -432,7 +532,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 	struct cfg80211_registered_device *rdev;
 
 	if (!dev->ieee80211_ptr)
-		return 0;
+		return NOTIFY_DONE;
 
 	rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
 
@@ -448,8 +548,28 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 				"symlink to netdev!\n");
 		}
 		dev->ieee80211_ptr->netdev = dev;
+#ifdef CONFIG_WIRELESS_EXT
+		dev->ieee80211_ptr->wext.default_key = -1;
+		dev->ieee80211_ptr->wext.default_mgmt_key = -1;
+#endif
 		mutex_unlock(&rdev->devlist_mtx);
 		break;
+	case NETDEV_GOING_DOWN:
+		if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
+			break;
+		if (!dev->ieee80211_ptr->ssid_len)
+			break;
+		cfg80211_leave_ibss(rdev, dev, true);
+		break;
+	case NETDEV_UP:
+#ifdef CONFIG_WIRELESS_EXT
+		if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
+			break;
+		if (!dev->ieee80211_ptr->wext.ibss.ssid_len)
+			break;
+		cfg80211_join_ibss(rdev, dev, &dev->ieee80211_ptr->wext.ibss);
+		break;
+#endif
 	case NETDEV_UNREGISTER:
 		mutex_lock(&rdev->devlist_mtx);
 		if (!list_empty(&dev->ieee80211_ptr->list)) {
@@ -458,9 +578,13 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		}
 		mutex_unlock(&rdev->devlist_mtx);
 		break;
+	case NETDEV_PRE_UP:
+		if (rfkill_blocked(rdev->rfkill))
+			return notifier_from_errno(-ERFKILL);
+		break;
 	}
 
-	return 0;
+	return NOTIFY_DONE;
 }
 
 static struct notifier_block cfg80211_netdev_notifier = {
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 0a592e4295f..bfa340c7abb 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -1,7 +1,7 @@
 /*
  * Wireless configuration interface internals.
  *
- * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 #ifndef __NET_WIRELESS_CORE_H
 #define __NET_WIRELESS_CORE_H
@@ -10,14 +10,15 @@
 #include <linux/netdevice.h>
 #include <linux/kref.h>
 #include <linux/rbtree.h>
-#include <linux/mutex.h>
+#include <linux/debugfs.h>
+#include <linux/rfkill.h>
+#include <linux/workqueue.h>
 #include <net/genetlink.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 #include "reg.h"
 
 struct cfg80211_registered_device {
-	struct cfg80211_ops *ops;
+	const struct cfg80211_ops *ops;
 	struct list_head list;
 	/* we hold this mutex during any call so that
 	 * we cannot do multiple calls at once, and also
@@ -25,6 +26,11 @@ struct cfg80211_registered_device {
 	 * any call is in progress */
 	struct mutex mtx;
 
+	/* rfkill support */
+	struct rfkill_ops rfkill_ops;
+	struct rfkill *rfkill;
+	struct work_struct rfkill_sync;
+
 	/* ISO / IEC 3166 alpha2 for which this device is receiving
 	 * country IEs on, this can help disregard country IEs from APs
 	 * on the same alpha2 quickly. The alpha2 may differ from
@@ -52,6 +58,17 @@ struct cfg80211_registered_device {
 	struct cfg80211_scan_request *scan_req; /* protected by RTNL */
 	unsigned long suspend_at;
 
+#ifdef CONFIG_CFG80211_DEBUGFS
+	/* Debugfs entries */
+	struct wiphy_debugfsdentries {
+		struct dentry *rts_threshold;
+		struct dentry *fragmentation_threshold;
+		struct dentry *short_retry_limit;
+		struct dentry *long_retry_limit;
+		struct dentry *ht40allow_map;
+	} debugfs;
+#endif
+
 	/* must be last because of the way we do wiphy_priv(),
 	 * and it should at least be aligned to NETDEV_ALIGN */
 	struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -74,10 +91,7 @@ bool wiphy_idx_valid(int wiphy_idx)
 extern struct mutex cfg80211_mutex;
 extern struct list_head cfg80211_drv_list;
 
-static inline void assert_cfg80211_lock(void)
-{
-	WARN_ON(!mutex_is_locked(&cfg80211_mutex));
-}
+#define assert_cfg80211_lock() WARN_ON(!mutex_is_locked(&cfg80211_mutex))
 
 /*
  * You can use this to mark a wiphy_idx as not having an associated wiphy.
@@ -148,4 +162,16 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev);
 void cfg80211_bss_age(struct cfg80211_registered_device *dev,
                       unsigned long age_secs);
 
+/* IBSS */
+int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       struct cfg80211_ibss_params *params);
+void cfg80211_clear_ibss(struct net_device *dev, bool nowext);
+int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+			struct net_device *dev, bool nowext);
+
+/* internal helpers */
+int cfg80211_validate_key_settings(struct key_params *params, int key_idx,
+				   const u8 *mac_addr);
+
 #endif /* __NET_WIRELESS_CORE_H */
diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
new file mode 100644
index 00000000000..679ddfcec1e
--- /dev/null
+++ b/net/wireless/debugfs.c
@@ -0,0 +1,131 @@
+/*
+ * cfg80211 debugfs
+ *
+ * Copyright 2009	Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "core.h"
+#include "debugfs.h"
+
+static int cfg80211_open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
+static ssize_t name## _read(struct file *file, char __user *userbuf,	\
+			    size_t count, loff_t *ppos)			\
+{									\
+	struct wiphy *wiphy= file->private_data;		\
+	char buf[buflen];						\
+	int res;							\
+									\
+	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations name## _ops = {			\
+	.read = name## _read,						\
+	.open = cfg80211_open_file_generic,				\
+};
+
+DEBUGFS_READONLY_FILE(rts_threshold, 20, "%d",
+		      wiphy->rts_threshold)
+DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
+		      wiphy->frag_threshold);
+DEBUGFS_READONLY_FILE(short_retry_limit, 20, "%d",
+		      wiphy->retry_short)
+DEBUGFS_READONLY_FILE(long_retry_limit, 20, "%d",
+		      wiphy->retry_long);
+
+static int ht_print_chan(struct ieee80211_channel *chan,
+			 char *buf, int buf_size, int offset)
+{
+	if (WARN_ON(offset > buf_size))
+		return 0;
+
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		return snprintf(buf + offset,
+				buf_size - offset,
+				"%d Disabled\n",
+				chan->center_freq);
+
+	return snprintf(buf + offset,
+			buf_size - offset,
+			"%d HT40 %c%c\n",
+			chan->center_freq,
+			(chan->flags & IEEE80211_CHAN_NO_HT40MINUS) ? ' ' : '-',
+			(chan->flags & IEEE80211_CHAN_NO_HT40PLUS)  ? ' ' : '+');
+}
+
+static ssize_t ht40allow_map_read(struct file *file,
+				  char __user *user_buf,
+				  size_t count, loff_t *ppos)
+{
+	struct wiphy *wiphy = file->private_data;
+	char *buf;
+	unsigned int offset = 0, buf_size = PAGE_SIZE, i, r;
+	enum ieee80211_band band;
+	struct ieee80211_supported_band *sband;
+
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mutex_lock(&cfg80211_mutex);
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+		for (i = 0; i < sband->n_channels; i++)
+			offset += ht_print_chan(&sband->channels[i],
+						buf, buf_size, offset);
+	}
+
+	mutex_unlock(&cfg80211_mutex);
+
+	r = simple_read_from_buffer(user_buf, count, ppos, buf, offset);
+
+	kfree(buf);
+
+	return r;
+}
+
+static const struct file_operations ht40allow_map_ops = {
+	.read = ht40allow_map_read,
+	.open = cfg80211_open_file_generic,
+};
+
+#define DEBUGFS_ADD(name)						\
+	drv->debugfs.name = debugfs_create_file(#name, S_IRUGO, phyd,	\
+						  &drv->wiphy, &name## _ops);
+#define DEBUGFS_DEL(name)						\
+	debugfs_remove(drv->debugfs.name);				\
+	drv->debugfs.name = NULL;
+
+void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv)
+{
+	struct dentry *phyd = drv->wiphy.debugfsdir;
+
+	DEBUGFS_ADD(rts_threshold);
+	DEBUGFS_ADD(fragmentation_threshold);
+	DEBUGFS_ADD(short_retry_limit);
+	DEBUGFS_ADD(long_retry_limit);
+	DEBUGFS_ADD(ht40allow_map);
+}
+
+void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv)
+{
+	DEBUGFS_DEL(rts_threshold);
+	DEBUGFS_DEL(fragmentation_threshold);
+	DEBUGFS_DEL(short_retry_limit);
+	DEBUGFS_DEL(long_retry_limit);
+	DEBUGFS_DEL(ht40allow_map);
+}
diff --git a/net/wireless/debugfs.h b/net/wireless/debugfs.h
new file mode 100644
index 00000000000..c226983ae66
--- /dev/null
+++ b/net/wireless/debugfs.h
@@ -0,0 +1,14 @@
+#ifndef __CFG80211_DEBUGFS_H
+#define __CFG80211_DEBUGFS_H
+
+#ifdef CONFIG_CFG80211_DEBUGFS
+void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv);
+void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv);
+#else
+static inline
+void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv) {}
+static inline
+void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv) {}
+#endif
+
+#endif /* __CFG80211_DEBUGFS_H */
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
new file mode 100644
index 00000000000..a4a1c3498ff
--- /dev/null
+++ b/net/wireless/ibss.c
@@ -0,0 +1,369 @@
+/*
+ * Some IBSS support code for cfg80211.
+ *
+ * Copyright 2009	Johannes Berg <johannes@sipsolutions.net>
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+
+
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_bss *bss;
+#ifdef CONFIG_WIRELESS_EXT
+	union iwreq_data wrqu;
+#endif
+
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return;
+
+	if (WARN_ON(!wdev->ssid_len))
+		return;
+
+	if (memcmp(bssid, wdev->bssid, ETH_ALEN) == 0)
+		return;
+
+	bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
+			       wdev->ssid, wdev->ssid_len,
+			       WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+
+	if (WARN_ON(!bss))
+		return;
+
+	if (wdev->current_bss) {
+		cfg80211_unhold_bss(wdev->current_bss);
+		cfg80211_put_bss(wdev->current_bss);
+	}
+
+	cfg80211_hold_bss(bss);
+	wdev->current_bss = bss;
+	memcpy(wdev->bssid, bssid, ETH_ALEN);
+
+	nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid, gfp);
+#ifdef CONFIG_WIRELESS_EXT
+	memset(&wrqu, 0, sizeof(wrqu));
+	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
+	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+#endif
+}
+EXPORT_SYMBOL(cfg80211_ibss_joined);
+
+int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       struct cfg80211_ibss_params *params)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	if (wdev->ssid_len)
+		return -EALREADY;
+
+#ifdef CONFIG_WIRELESS_EXT
+	wdev->wext.ibss.channel = params->channel;
+#endif
+	err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
+
+	if (err)
+		return err;
+
+	memcpy(wdev->ssid, params->ssid, params->ssid_len);
+	wdev->ssid_len = params->ssid_len;
+
+	return 0;
+}
+
+void cfg80211_clear_ibss(struct net_device *dev, bool nowext)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	if (wdev->current_bss) {
+		cfg80211_unhold_bss(wdev->current_bss);
+		cfg80211_put_bss(wdev->current_bss);
+	}
+
+	wdev->current_bss = NULL;
+	wdev->ssid_len = 0;
+	memset(wdev->bssid, 0, ETH_ALEN);
+#ifdef CONFIG_WIRELESS_EXT
+	if (!nowext)
+		wdev->wext.ibss.ssid_len = 0;
+#endif
+}
+
+int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+			struct net_device *dev, bool nowext)
+{
+	int err;
+
+	err = rdev->ops->leave_ibss(&rdev->wiphy, dev);
+
+	if (err)
+		return err;
+
+	cfg80211_clear_ibss(dev, nowext);
+
+	return 0;
+}
+
+#ifdef CONFIG_WIRELESS_EXT
+static int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
+				   struct wireless_dev *wdev)
+{
+	enum ieee80211_band band;
+	int i;
+
+	if (!wdev->wext.ibss.beacon_interval)
+		wdev->wext.ibss.beacon_interval = 100;
+
+	/* try to find an IBSS channel if none requested ... */
+	if (!wdev->wext.ibss.channel) {
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			struct ieee80211_supported_band *sband;
+			struct ieee80211_channel *chan;
+
+			sband = rdev->wiphy.bands[band];
+			if (!sband)
+				continue;
+
+			for (i = 0; i < sband->n_channels; i++) {
+				chan = &sband->channels[i];
+				if (chan->flags & IEEE80211_CHAN_NO_IBSS)
+					continue;
+				if (chan->flags & IEEE80211_CHAN_DISABLED)
+					continue;
+				wdev->wext.ibss.channel = chan;
+				break;
+			}
+
+			if (wdev->wext.ibss.channel)
+				break;
+		}
+
+		if (!wdev->wext.ibss.channel)
+			return -EINVAL;
+	}
+
+	/* don't join -- SSID is not there */
+	if (!wdev->wext.ibss.ssid_len)
+		return 0;
+
+	if (!netif_running(wdev->netdev))
+		return 0;
+
+	return cfg80211_join_ibss(wiphy_to_dev(wdev->wiphy),
+				  wdev->netdev, &wdev->wext.ibss);
+}
+
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct ieee80211_channel *chan;
+	int err;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+		return -EOPNOTSUPP;
+
+	chan = cfg80211_wext_freq(wdev->wiphy, freq);
+	if (chan && IS_ERR(chan))
+		return PTR_ERR(chan);
+
+	if (chan &&
+	    (chan->flags & IEEE80211_CHAN_NO_IBSS ||
+	     chan->flags & IEEE80211_CHAN_DISABLED))
+		return -EINVAL;
+
+	if (wdev->wext.ibss.channel == chan)
+		return 0;
+
+	if (wdev->ssid_len) {
+		err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
+					  dev, true);
+		if (err)
+			return err;
+	}
+
+	if (chan) {
+		wdev->wext.ibss.channel = chan;
+		wdev->wext.ibss.channel_fixed = true;
+	} else {
+		/* cfg80211_ibss_wext_join will pick one if needed */
+		wdev->wext.ibss.channel_fixed = false;
+	}
+
+	return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwfreq);
+
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct ieee80211_channel *chan = NULL;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (wdev->current_bss)
+		chan = wdev->current_bss->channel;
+	else if (wdev->wext.ibss.channel)
+		chan = wdev->wext.ibss.channel;
+
+	if (chan) {
+		freq->m = chan->center_freq;
+		freq->e = 6;
+		return 0;
+	}
+
+	/* no channel if not joining */
+	return -EINVAL;
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwfreq);
+
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	size_t len = data->length;
+	int err;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+		return -EOPNOTSUPP;
+
+	if (wdev->ssid_len) {
+		err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
+					  dev, true);
+		if (err)
+			return err;
+	}
+
+	/* iwconfig uses nul termination in SSID.. */
+	if (len > 0 && ssid[len - 1] == '\0')
+		len--;
+
+	wdev->wext.ibss.ssid = wdev->ssid;
+	memcpy(wdev->wext.ibss.ssid, ssid, len);
+	wdev->wext.ibss.ssid_len = len;
+
+	return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwessid);
+
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	data->flags = 0;
+
+	if (wdev->ssid_len) {
+		data->flags = 1;
+		data->length = wdev->ssid_len;
+		memcpy(ssid, wdev->ssid, data->length);
+	} else if (wdev->wext.ibss.ssid && wdev->wext.ibss.ssid_len) {
+		data->flags = 1;
+		data->length = wdev->wext.ibss.ssid_len;
+		memcpy(ssid, wdev->wext.ibss.ssid, data->length);
+	}
+
+	return 0;
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwessid);
+
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	u8 *bssid = ap_addr->sa_data;
+	int err;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+		return -EOPNOTSUPP;
+
+	if (ap_addr->sa_family != ARPHRD_ETHER)
+		return -EINVAL;
+
+	/* automatic mode */
+	if (is_zero_ether_addr(bssid) || is_broadcast_ether_addr(bssid))
+		bssid = NULL;
+
+	/* both automatic */
+	if (!bssid && !wdev->wext.ibss.bssid)
+		return 0;
+
+	/* fixed already - and no change */
+	if (wdev->wext.ibss.bssid && bssid &&
+	    compare_ether_addr(bssid, wdev->wext.ibss.bssid) == 0)
+		return 0;
+
+	if (wdev->ssid_len) {
+		err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
+					  dev, true);
+		if (err)
+			return err;
+	}
+
+	if (bssid) {
+		memcpy(wdev->wext.bssid, bssid, ETH_ALEN);
+		wdev->wext.ibss.bssid = wdev->wext.bssid;
+	} else
+		wdev->wext.ibss.bssid = NULL;
+
+	return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwap);
+
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	ap_addr->sa_family = ARPHRD_ETHER;
+
+	if (wdev->wext.ibss.bssid) {
+		memcpy(ap_addr->sa_data, wdev->wext.ibss.bssid, ETH_ALEN);
+		return 0;
+	}
+
+	memcpy(ap_addr->sa_data, wdev->bssid, ETH_ALEN);
+	return 0;
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwap);
+#endif
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index bec5721b6f9..42184361a10 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -28,19 +28,55 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len)
 }
 EXPORT_SYMBOL(cfg80211_send_rx_assoc);
 
-void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf, size_t len)
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-	nl80211_send_rx_deauth(rdev, dev, buf, len);
+	nl80211_send_deauth(rdev, dev, buf, len);
 }
-EXPORT_SYMBOL(cfg80211_send_rx_deauth);
+EXPORT_SYMBOL(cfg80211_send_deauth);
 
-void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf,
-			       size_t len)
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-	nl80211_send_rx_disassoc(rdev, dev, buf, len);
+	nl80211_send_disassoc(rdev, dev, buf, len);
 }
-EXPORT_SYMBOL(cfg80211_send_rx_disassoc);
+EXPORT_SYMBOL(cfg80211_send_disassoc);
+
+static void cfg80211_wext_disconnected(struct net_device *dev)
+{
+#ifdef CONFIG_WIRELESS_EXT
+	union iwreq_data wrqu;
+	memset(&wrqu, 0, sizeof(wrqu));
+	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+#endif
+}
+
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr)
+{
+	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+	nl80211_send_auth_timeout(rdev, dev, addr);
+	cfg80211_wext_disconnected(dev);
+}
+EXPORT_SYMBOL(cfg80211_send_auth_timeout);
+
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr)
+{
+	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+	nl80211_send_assoc_timeout(rdev, dev, addr);
+	cfg80211_wext_disconnected(dev);
+}
+EXPORT_SYMBOL(cfg80211_send_assoc_timeout);
+
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+				  enum nl80211_key_type key_type, int key_id,
+				  const u8 *tsc)
+{
+	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+	nl80211_michael_mic_failure(rdev, dev, addr, key_type, key_id, tsc);
+}
+EXPORT_SYMBOL(cfg80211_michael_mic_failure);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2456e4ee445..24168560eba 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1,7 +1,7 @@
 /*
  * This is the new netlink-based wireless configuration interface.
  *
- * Copyright 2006, 2007	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/if.h>
@@ -57,10 +57,14 @@ static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
 static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 	[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
-				      .len = BUS_ID_SIZE-1 },
+				      .len = 20-1 },
 	[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_RETRY_SHORT] = { .type = NLA_U8 },
+	[NL80211_ATTR_WIPHY_RETRY_LONG] = { .type = NLA_U8 },
+	[NL80211_ATTR_WIPHY_FRAG_THRESHOLD] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_RTS_THRESHOLD] = { .type = NLA_U32 },
 
 	[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
@@ -73,6 +77,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 	[NL80211_ATTR_KEY_IDX] = { .type = NLA_U8 },
 	[NL80211_ATTR_KEY_CIPHER] = { .type = NLA_U32 },
 	[NL80211_ATTR_KEY_DEFAULT] = { .type = NLA_FLAG },
+	[NL80211_ATTR_KEY_SEQ] = { .type = NLA_BINARY, .len = 8 },
 
 	[NL80211_ATTR_BEACON_INTERVAL] = { .type = NLA_U32 },
 	[NL80211_ATTR_DTIM_PERIOD] = { .type = NLA_U32 },
@@ -116,8 +121,45 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 				.len = IEEE80211_MAX_SSID_LEN },
 	[NL80211_ATTR_AUTH_TYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_REASON_CODE] = { .type = NLA_U16 },
+	[NL80211_ATTR_FREQ_FIXED] = { .type = NLA_FLAG },
+	[NL80211_ATTR_TIMED_OUT] = { .type = NLA_FLAG },
+	[NL80211_ATTR_USE_MFP] = { .type = NLA_U32 },
+	[NL80211_ATTR_STA_FLAGS2] = {
+		.len = sizeof(struct nl80211_sta_flag_update),
+	},
+	[NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG },
 };
 
+/* IE validation */
+static bool is_valid_ie_attr(const struct nlattr *attr)
+{
+	const u8 *pos;
+	int len;
+
+	if (!attr)
+		return true;
+
+	pos = nla_data(attr);
+	len = nla_len(attr);
+
+	while (len) {
+		u8 elemlen;
+
+		if (len < 2)
+			return false;
+		len -= 2;
+
+		elemlen = pos[1];
+		if (elemlen > len)
+			return false;
+
+		len -= elemlen;
+		pos += 2 + elemlen;
+	}
+
+	return true;
+}
+
 /* message building helper */
 static inline void *nl80211hdr_put(struct sk_buff *skb, u32 pid, u32 seq,
 				   int flags, u8 cmd)
@@ -126,6 +168,30 @@ static inline void *nl80211hdr_put(struct sk_buff *skb, u32 pid, u32 seq,
 	return genlmsg_put(skb, pid, seq, &nl80211_fam, flags, cmd);
 }
 
+static int nl80211_msg_put_channel(struct sk_buff *msg,
+				   struct ieee80211_channel *chan)
+{
+	NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_FREQ,
+		    chan->center_freq);
+
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_DISABLED);
+	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN);
+	if (chan->flags & IEEE80211_CHAN_NO_IBSS)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_NO_IBSS);
+	if (chan->flags & IEEE80211_CHAN_RADAR)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR);
+
+	NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+		    DBM_TO_MBM(chan->max_power));
+
+	return 0;
+
+ nla_put_failure:
+	return -ENOBUFS;
+}
+
 /* netlink command implementations */
 
 static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
@@ -149,8 +215,24 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->wiphy_idx);
 	NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
+
+	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_SHORT,
+		   dev->wiphy.retry_short);
+	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_LONG,
+		   dev->wiphy.retry_long);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+		    dev->wiphy.frag_threshold);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+		    dev->wiphy.rts_threshold);
+
 	NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
 		   dev->wiphy.max_scan_ssids);
+	NLA_PUT_U16(msg, NL80211_ATTR_MAX_SCAN_IE_LEN,
+		    dev->wiphy.max_scan_ie_len);
+
+	NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
+		sizeof(u32) * dev->wiphy.n_cipher_suites,
+		dev->wiphy.cipher_suites);
 
 	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
 	if (!nl_modes)
@@ -202,20 +284,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 				goto nla_put_failure;
 
 			chan = &dev->wiphy.bands[band]->channels[i];
-			NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_FREQ,
-				    chan->center_freq);
-
-			if (chan->flags & IEEE80211_CHAN_DISABLED)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_DISABLED);
-			if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN);
-			if (chan->flags & IEEE80211_CHAN_NO_IBSS)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_NO_IBSS);
-			if (chan->flags & IEEE80211_CHAN_RADAR)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR);
 
-			NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-				    DBM_TO_MBM(chan->max_power));
+			if (nl80211_msg_put_channel(msg, chan))
+				goto nla_put_failure;
 
 			nla_nest_end(msg, nl_freq);
 		}
@@ -273,6 +344,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	CMD(assoc, ASSOCIATE);
 	CMD(deauth, DEAUTHENTICATE);
 	CMD(disassoc, DISASSOCIATE);
+	CMD(join_ibss, JOIN_IBSS);
 
 #undef CMD
 	nla_nest_end(msg, nl_cmds);
@@ -317,7 +389,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
 	if (IS_ERR(dev))
 		return PTR_ERR(dev);
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out_err;
 
@@ -365,6 +437,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *rdev;
 	int result = 0, rem_txq_params = 0;
 	struct nlattr *nl_txq_params;
+	u32 changed;
+	u8 retry_short = 0, retry_long = 0;
+	u32 frag_threshold = 0, rts_threshold = 0;
 
 	rtnl_lock();
 
@@ -418,7 +493,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
 		struct ieee80211_channel *chan;
 		struct ieee80211_sta_ht_cap *ht_cap;
-		u32 freq, sec_freq;
+		u32 freq;
 
 		if (!rdev->ops->set_channel) {
 			result = -EOPNOTSUPP;
@@ -444,33 +519,28 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
 			goto bad_res;
 
-		if (channel_type == NL80211_CHAN_HT40MINUS)
-			sec_freq = freq - 20;
-		else if (channel_type == NL80211_CHAN_HT40PLUS)
-			sec_freq = freq + 20;
-		else
-			sec_freq = 0;
-
-		ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
-
-		/* no HT capabilities */
-		if (channel_type != NL80211_CHAN_NO_HT &&
-		    !ht_cap->ht_supported)
+		if (channel_type == NL80211_CHAN_HT40MINUS &&
+		    (chan->flags & IEEE80211_CHAN_NO_HT40MINUS))
+			goto bad_res;
+		else if (channel_type == NL80211_CHAN_HT40PLUS &&
+			 (chan->flags & IEEE80211_CHAN_NO_HT40PLUS))
 			goto bad_res;
 
-		if (sec_freq) {
-			struct ieee80211_channel *schan;
+		/*
+		 * At this point we know if that if HT40 was requested
+		 * we are allowed to use it and the extension channel
+		 * exists.
+		 */
 
-			/* no 40 MHz capabilities */
+		ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
+
+		/* no HT capabilities or intolerant */
+		if (channel_type != NL80211_CHAN_NO_HT) {
+			if (!ht_cap->ht_supported)
+				goto bad_res;
 			if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
 			    (ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT))
 				goto bad_res;
-
-			schan = ieee80211_get_channel(&rdev->wiphy, sec_freq);
-
-			/* Secondary channel not allowed */
-			if (!schan || schan->flags & IEEE80211_CHAN_DISABLED)
-				goto bad_res;
 		}
 
 		result = rdev->ops->set_channel(&rdev->wiphy, chan,
@@ -479,6 +549,84 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 			goto bad_res;
 	}
 
+	changed = 0;
+
+	if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) {
+		retry_short = nla_get_u8(
+			info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]);
+		if (retry_short == 0) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+		changed |= WIPHY_PARAM_RETRY_SHORT;
+	}
+
+	if (info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]) {
+		retry_long = nla_get_u8(
+			info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]);
+		if (retry_long == 0) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+		changed |= WIPHY_PARAM_RETRY_LONG;
+	}
+
+	if (info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]) {
+		frag_threshold = nla_get_u32(
+			info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]);
+		if (frag_threshold < 256) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+		if (frag_threshold != (u32) -1) {
+			/*
+			 * Fragments (apart from the last one) are required to
+			 * have even length. Make the fragmentation code
+			 * simpler by stripping LSB should someone try to use
+			 * odd threshold value.
+			 */
+			frag_threshold &= ~0x1;
+		}
+		changed |= WIPHY_PARAM_FRAG_THRESHOLD;
+	}
+
+	if (info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]) {
+		rts_threshold = nla_get_u32(
+			info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]);
+		changed |= WIPHY_PARAM_RTS_THRESHOLD;
+	}
+
+	if (changed) {
+		u8 old_retry_short, old_retry_long;
+		u32 old_frag_threshold, old_rts_threshold;
+
+		if (!rdev->ops->set_wiphy_params) {
+			result = -EOPNOTSUPP;
+			goto bad_res;
+		}
+
+		old_retry_short = rdev->wiphy.retry_short;
+		old_retry_long = rdev->wiphy.retry_long;
+		old_frag_threshold = rdev->wiphy.frag_threshold;
+		old_rts_threshold = rdev->wiphy.rts_threshold;
+
+		if (changed & WIPHY_PARAM_RETRY_SHORT)
+			rdev->wiphy.retry_short = retry_short;
+		if (changed & WIPHY_PARAM_RETRY_LONG)
+			rdev->wiphy.retry_long = retry_long;
+		if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
+			rdev->wiphy.frag_threshold = frag_threshold;
+		if (changed & WIPHY_PARAM_RTS_THRESHOLD)
+			rdev->wiphy.rts_threshold = rts_threshold;
+
+		result = rdev->ops->set_wiphy_params(&rdev->wiphy, changed);
+		if (result) {
+			rdev->wiphy.retry_short = old_retry_short;
+			rdev->wiphy.retry_long = old_retry_long;
+			rdev->wiphy.frag_threshold = old_frag_threshold;
+			rdev->wiphy.rts_threshold = old_rts_threshold;
+		}
+	}
 
  bad_res:
 	mutex_unlock(&rdev->mtx);
@@ -489,6 +637,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
 
 static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
+			      struct cfg80211_registered_device *rdev,
 			      struct net_device *dev)
 {
 	void *hdr;
@@ -498,6 +647,7 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		return -1;
 
 	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
 	NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, dev->name);
 	NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, dev->ieee80211_ptr->iftype);
 	return genlmsg_end(msg, hdr);
@@ -532,7 +682,7 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
 			}
 			if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
 					       cb->nlh->nlmsg_seq, NLM_F_MULTI,
-					       wdev->netdev) < 0) {
+					       dev, wdev->netdev) < 0) {
 				mutex_unlock(&dev->devlist_mtx);
 				goto out;
 			}
@@ -562,11 +712,12 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out_err;
 
-	if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0, netdev) < 0)
+	if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
+			       dev, netdev) < 0)
 		goto out_free;
 
 	dev_put(netdev);
@@ -616,7 +767,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *drv;
 	struct vif_params params;
 	int err, ifindex;
-	enum nl80211_iftype type;
+	enum nl80211_iftype otype, ntype;
 	struct net_device *dev;
 	u32 _flags, *flags = NULL;
 	bool change = false;
@@ -630,30 +781,27 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 		goto unlock_rtnl;
 
 	ifindex = dev->ifindex;
-	type = dev->ieee80211_ptr->iftype;
+	otype = ntype = dev->ieee80211_ptr->iftype;
 	dev_put(dev);
 
 	if (info->attrs[NL80211_ATTR_IFTYPE]) {
-		enum nl80211_iftype ntype;
-
 		ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
-		if (type != ntype)
+		if (otype != ntype)
 			change = true;
-		type = ntype;
-		if (type > NL80211_IFTYPE_MAX) {
+		if (ntype > NL80211_IFTYPE_MAX) {
 			err = -EINVAL;
 			goto unlock;
 		}
 	}
 
 	if (!drv->ops->change_virtual_intf ||
-	    !(drv->wiphy.interface_modes & (1 << type))) {
+	    !(drv->wiphy.interface_modes & (1 << ntype))) {
 		err = -EOPNOTSUPP;
 		goto unlock;
 	}
 
 	if (info->attrs[NL80211_ATTR_MESH_ID]) {
-		if (type != NL80211_IFTYPE_MESH_POINT) {
+		if (ntype != NL80211_IFTYPE_MESH_POINT) {
 			err = -EINVAL;
 			goto unlock;
 		}
@@ -663,7 +811,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_MNTR_FLAGS]) {
-		if (type != NL80211_IFTYPE_MONITOR) {
+		if (ntype != NL80211_IFTYPE_MONITOR) {
 			err = -EINVAL;
 			goto unlock;
 		}
@@ -678,12 +826,17 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 
 	if (change)
 		err = drv->ops->change_virtual_intf(&drv->wiphy, ifindex,
-						    type, flags, &params);
+						    ntype, flags, &params);
 	else
 		err = 0;
 
 	dev = __dev_get_by_index(&init_net, ifindex);
-	WARN_ON(!dev || (!err && dev->ieee80211_ptr->iftype != type));
+	WARN_ON(!dev || (!err && dev->ieee80211_ptr->iftype != ntype));
+
+	if (dev && !err && (ntype != otype)) {
+		if (otype == NL80211_IFTYPE_ADHOC)
+			cfg80211_clear_ibss(dev, false);
+	}
 
  unlock:
 	cfg80211_put_dev(drv);
@@ -832,7 +985,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		err = -ENOMEM;
 		goto out;
@@ -920,6 +1073,14 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	err = func(&drv->wiphy, dev, key_idx);
+#ifdef CONFIG_WIRELESS_EXT
+	if (!err) {
+		if (func == drv->ops->set_default_key)
+			dev->ieee80211_ptr->wext.default_key = key_idx;
+		else
+			dev->ieee80211_ptr->wext.default_mgmt_key = key_idx;
+	}
+#endif
 
  out:
 	cfg80211_put_dev(drv);
@@ -934,7 +1095,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *drv;
-	int err;
+	int err, i;
 	struct net_device *dev;
 	struct key_params params;
 	u8 key_idx = 0;
@@ -950,6 +1111,11 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 		params.key_len = nla_len(info->attrs[NL80211_ATTR_KEY_DATA]);
 	}
 
+	if (info->attrs[NL80211_ATTR_KEY_SEQ]) {
+		params.seq = nla_data(info->attrs[NL80211_ATTR_KEY_SEQ]);
+		params.seq_len = nla_len(info->attrs[NL80211_ATTR_KEY_SEQ]);
+	}
+
 	if (info->attrs[NL80211_ATTR_KEY_IDX])
 		key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
 
@@ -958,44 +1124,8 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (key_idx > 5)
-		return -EINVAL;
-
-	/*
-	 * Disallow pairwise keys with non-zero index unless it's WEP
-	 * (because current deployments use pairwise WEP keys with
-	 * non-zero indizes but 802.11i clearly specifies to use zero)
-	 */
-	if (mac_addr && key_idx &&
-	    params.cipher != WLAN_CIPHER_SUITE_WEP40 &&
-	    params.cipher != WLAN_CIPHER_SUITE_WEP104)
-		return -EINVAL;
-
-	/* TODO: add definitions for the lengths to linux/ieee80211.h */
-	switch (params.cipher) {
-	case WLAN_CIPHER_SUITE_WEP40:
-		if (params.key_len != 5)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_TKIP:
-		if (params.key_len != 32)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_CCMP:
-		if (params.key_len != 16)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_WEP104:
-		if (params.key_len != 13)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_AES_CMAC:
-		if (params.key_len != 16)
-			return -EINVAL;
-		break;
-	default:
+	if (cfg80211_validate_key_settings(&params, key_idx, mac_addr))
 		return -EINVAL;
-	}
 
 	rtnl_lock();
 
@@ -1003,6 +1133,14 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto unlock_rtnl;
 
+	for (i = 0; i < drv->wiphy.n_cipher_suites; i++)
+		if (params.cipher == drv->wiphy.cipher_suites[i])
+			break;
+	if (i == drv->wiphy.n_cipher_suites) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	if (!drv->ops->add_key) {
 		err = -EOPNOTSUPP;
 		goto out;
@@ -1049,6 +1187,15 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 
 	err = drv->ops->del_key(&drv->wiphy, dev, key_idx, mac_addr);
 
+#ifdef CONFIG_WIRELESS_EXT
+	if (!err) {
+		if (key_idx == dev->ieee80211_ptr->wext.default_key)
+			dev->ieee80211_ptr->wext.default_key = -1;
+		else if (key_idx == dev->ieee80211_ptr->wext.default_mgmt_key)
+			dev->ieee80211_ptr->wext.default_mgmt_key = -1;
+	}
+#endif
+
  out:
 	cfg80211_put_dev(drv);
 	dev_put(dev);
@@ -1069,6 +1216,9 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	struct beacon_parameters params;
 	int haveinfo = 0;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_BEACON_TAIL]))
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -1186,15 +1336,36 @@ static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
 	[NL80211_STA_FLAG_AUTHORIZED] = { .type = NLA_FLAG },
 	[NL80211_STA_FLAG_SHORT_PREAMBLE] = { .type = NLA_FLAG },
 	[NL80211_STA_FLAG_WME] = { .type = NLA_FLAG },
+	[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
 };
 
-static int parse_station_flags(struct nlattr *nla, u32 *staflags)
+static int parse_station_flags(struct genl_info *info,
+			       struct station_parameters *params)
 {
 	struct nlattr *flags[NL80211_STA_FLAG_MAX + 1];
+	struct nlattr *nla;
 	int flag;
 
-	*staflags = 0;
+	/*
+	 * Try parsing the new attribute first so userspace
+	 * can specify both for older kernels.
+	 */
+	nla = info->attrs[NL80211_ATTR_STA_FLAGS2];
+	if (nla) {
+		struct nl80211_sta_flag_update *sta_flags;
+
+		sta_flags = nla_data(nla);
+		params->sta_flags_mask = sta_flags->mask;
+		params->sta_flags_set = sta_flags->set;
+		if ((params->sta_flags_mask |
+		     params->sta_flags_set) & BIT(__NL80211_STA_FLAG_INVALID))
+			return -EINVAL;
+		return 0;
+	}
+
+	/* if present, parse the old attribute */
 
+	nla = info->attrs[NL80211_ATTR_STA_FLAGS];
 	if (!nla)
 		return 0;
 
@@ -1202,11 +1373,12 @@ static int parse_station_flags(struct nlattr *nla, u32 *staflags)
 			     nla, sta_flags_policy))
 		return -EINVAL;
 
-	*staflags = STATION_FLAG_CHANGED;
+	params->sta_flags_mask = (1 << __NL80211_STA_FLAG_AFTER_LAST) - 1;
+	params->sta_flags_mask &= ~1;
 
 	for (flag = 1; flag <= NL80211_STA_FLAG_MAX; flag++)
 		if (flags[flag])
-			*staflags |= (1<<flag);
+			params->sta_flags_set |= (1<<flag);
 
 	return 0;
 }
@@ -1424,7 +1596,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out;
 
@@ -1502,8 +1674,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.ht_capa =
 			nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
 
-	if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
-				&params.station_flags))
+	if (parse_station_flags(info, &params))
 		return -EINVAL;
 
 	if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
@@ -1516,6 +1687,12 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
 	if (err)
 		goto out;
@@ -1567,13 +1744,16 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 		nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
+
 	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	if (!params.aid || params.aid > IEEE80211_MAX_AID)
+		return -EINVAL;
+
 	if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
 		params.ht_capa =
 			nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
 
-	if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
-				&params.station_flags))
+	if (parse_station_flags(info, &params))
 		return -EINVAL;
 
 	rtnl_lock();
@@ -1582,6 +1762,12 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
 	if (err)
 		goto out;
@@ -1625,6 +1811,12 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	if (!drv->ops->del_station) {
 		err = -EOPNOTSUPP;
 		goto out;
@@ -1808,7 +2000,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out;
 
@@ -2124,7 +2316,7 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 		goto out;
 
 	/* Draw up a netlink message to send back */
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		err = -ENOBUFS;
 		goto out;
@@ -2302,7 +2494,7 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
 	if (!cfg80211_regdomain)
 		goto out;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		err = -ENOBUFS;
 		goto out;
@@ -2385,18 +2577,24 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
 			rem_reg_rules) {
 		num_rules++;
 		if (num_rules > NL80211_MAX_SUPP_REG_RULES)
-			goto bad_reg;
+			return -EINVAL;
 	}
 
-	if (!reg_is_valid_request(alpha2))
-		return -EINVAL;
+	mutex_lock(&cfg80211_mutex);
+
+	if (!reg_is_valid_request(alpha2)) {
+		r = -EINVAL;
+		goto bad_reg;
+	}
 
 	size_of_regd = sizeof(struct ieee80211_regdomain) +
 		(num_rules * sizeof(struct ieee80211_reg_rule));
 
 	rd = kzalloc(size_of_regd, GFP_KERNEL);
-	if (!rd)
-		return -ENOMEM;
+	if (!rd) {
+		r = -ENOMEM;
+		goto bad_reg;
+	}
 
 	rd->n_reg_rules = num_rules;
 	rd->alpha2[0] = alpha2[0];
@@ -2413,20 +2611,24 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
 
 		rule_idx++;
 
-		if (rule_idx > NL80211_MAX_SUPP_REG_RULES)
+		if (rule_idx > NL80211_MAX_SUPP_REG_RULES) {
+			r = -EINVAL;
 			goto bad_reg;
+		}
 	}
 
 	BUG_ON(rule_idx != num_rules);
 
-	mutex_lock(&cfg80211_mutex);
 	r = set_regdom(rd);
+
 	mutex_unlock(&cfg80211_mutex);
+
 	return r;
 
  bad_reg:
+	mutex_unlock(&cfg80211_mutex);
 	kfree(rd);
-	return -EINVAL;
+	return r;
 }
 
 static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
@@ -2442,6 +2644,9 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	enum ieee80211_band band;
 	size_t ie_len;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2492,6 +2697,11 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	else
 		ie_len = 0;
 
+	if (ie_len > wiphy->max_scan_ie_len) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	request = kzalloc(sizeof(*request)
 			+ sizeof(*ssid) * n_ssids
 			+ sizeof(channel) * n_channels
@@ -2554,7 +2764,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 
 	if (info->attrs[NL80211_ATTR_IE]) {
 		request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
-		memcpy(request->ie, nla_data(info->attrs[NL80211_ATTR_IE]),
+		memcpy((void *)request->ie,
+		       nla_data(info->attrs[NL80211_ATTR_IE]),
 		       request->ie_len);
 	}
 
@@ -2710,6 +2921,15 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_AUTH_TYPE])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2731,11 +2951,6 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
@@ -2761,13 +2976,10 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 		req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
 	}
 
-	if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
-		req.auth_type =
-			nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
-		if (!nl80211_valid_auth_type(req.auth_type)) {
-			err = -EINVAL;
-			goto out;
-		}
+	req.auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
+	if (!nl80211_valid_auth_type(req.auth_type)) {
+		err = -EINVAL;
+		goto out;
 	}
 
 	err = drv->ops->auth(&drv->wiphy, dev, &req);
@@ -2788,6 +3000,13 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC] ||
+	    !info->attrs[NL80211_ATTR_SSID])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2809,12 +3028,6 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC] ||
-	    !info->attrs[NL80211_ATTR_SSID]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
@@ -2838,6 +3051,19 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 		req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
 	}
 
+	if (info->attrs[NL80211_ATTR_USE_MFP]) {
+		enum nl80211_mfp use_mfp =
+			nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]);
+		if (use_mfp == NL80211_MFP_REQUIRED)
+			req.use_mfp = true;
+		else if (use_mfp != NL80211_MFP_NO) {
+			err = -EINVAL;
+			goto out;
+		}
+	}
+
+	req.control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
+
 	err = drv->ops->assoc(&drv->wiphy, dev, &req);
 
 out:
@@ -2856,6 +3082,15 @@ static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_REASON_CODE])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2877,24 +3112,16 @@ static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
 	req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (info->attrs[NL80211_ATTR_REASON_CODE]) {
-		req.reason_code =
-			nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
-		if (req.reason_code == 0) {
-			/* Reason Code 0 is reserved */
-			err = -EINVAL;
-			goto out;
-		}
+	req.reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+	if (req.reason_code == 0) {
+		/* Reason Code 0 is reserved */
+		err = -EINVAL;
+		goto out;
 	}
 
 	if (info->attrs[NL80211_ATTR_IE]) {
@@ -2920,6 +3147,15 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_REASON_CODE])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2941,24 +3177,16 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
 	req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (info->attrs[NL80211_ATTR_REASON_CODE]) {
-		req.reason_code =
-			nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
-		if (req.reason_code == 0) {
-			/* Reason Code 0 is reserved */
-			err = -EINVAL;
-			goto out;
-		}
+	req.reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+	if (req.reason_code == 0) {
+		/* Reason Code 0 is reserved */
+		err = -EINVAL;
+		goto out;
 	}
 
 	if (info->attrs[NL80211_ATTR_IE]) {
@@ -2976,6 +3204,124 @@ unlock_rtnl:
 	return err;
 }
 
+static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *drv;
+	struct net_device *dev;
+	struct cfg80211_ibss_params ibss;
+	struct wiphy *wiphy;
+	int err;
+
+	memset(&ibss, 0, sizeof(ibss));
+
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
+	    !info->attrs[NL80211_ATTR_SSID] ||
+	    !nla_len(info->attrs[NL80211_ATTR_SSID]))
+		return -EINVAL;
+
+	ibss.beacon_interval = 100;
+
+	if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
+		ibss.beacon_interval =
+			nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
+		if (ibss.beacon_interval < 1 || ibss.beacon_interval > 10000)
+			return -EINVAL;
+	}
+
+	rtnl_lock();
+
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+	if (err)
+		goto unlock_rtnl;
+
+	if (!drv->ops->join_ibss) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (!netif_running(dev)) {
+		err = -ENETDOWN;
+		goto out;
+	}
+
+	wiphy = &drv->wiphy;
+
+	if (info->attrs[NL80211_ATTR_MAC])
+		ibss.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+	ibss.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
+	ibss.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
+
+	if (info->attrs[NL80211_ATTR_IE]) {
+		ibss.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+		ibss.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+	}
+
+	ibss.channel = ieee80211_get_channel(wiphy,
+		nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+	if (!ibss.channel ||
+	    ibss.channel->flags & IEEE80211_CHAN_NO_IBSS ||
+	    ibss.channel->flags & IEEE80211_CHAN_DISABLED) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
+
+	err = cfg80211_join_ibss(drv, dev, &ibss);
+
+out:
+	cfg80211_put_dev(drv);
+	dev_put(dev);
+unlock_rtnl:
+	rtnl_unlock();
+	return err;
+}
+
+static int nl80211_leave_ibss(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *drv;
+	struct net_device *dev;
+	int err;
+
+	rtnl_lock();
+
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+	if (err)
+		goto unlock_rtnl;
+
+	if (!drv->ops->leave_ibss) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (!netif_running(dev)) {
+		err = -ENETDOWN;
+		goto out;
+	}
+
+	err = cfg80211_leave_ibss(drv, dev, false);
+
+out:
+	cfg80211_put_dev(drv);
+	dev_put(dev);
+unlock_rtnl:
+	rtnl_unlock();
+	return err;
+}
+
 static struct genl_ops nl80211_ops[] = {
 	{
 		.cmd = NL80211_CMD_GET_WIPHY,
@@ -3177,6 +3523,18 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = NL80211_CMD_JOIN_IBSS,
+		.doit = nl80211_join_ibss,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
+	{
+		.cmd = NL80211_CMD_LEAVE_IBSS,
+		.doit = nl80211_leave_ibss,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
 	.name = "mlme",
@@ -3199,7 +3557,7 @@ void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev)
 {
 	struct sk_buff *msg;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3211,11 +3569,43 @@ void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev)
 	genlmsg_multicast(msg, 0, nl80211_config_mcgrp.id, GFP_KERNEL);
 }
 
+static int nl80211_add_scan_req(struct sk_buff *msg,
+				struct cfg80211_registered_device *rdev)
+{
+	struct cfg80211_scan_request *req = rdev->scan_req;
+	struct nlattr *nest;
+	int i;
+
+	if (WARN_ON(!req))
+		return 0;
+
+	nest = nla_nest_start(msg, NL80211_ATTR_SCAN_SSIDS);
+	if (!nest)
+		goto nla_put_failure;
+	for (i = 0; i < req->n_ssids; i++)
+		NLA_PUT(msg, i, req->ssids[i].ssid_len, req->ssids[i].ssid);
+	nla_nest_end(msg, nest);
+
+	nest = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES);
+	if (!nest)
+		goto nla_put_failure;
+	for (i = 0; i < req->n_channels; i++)
+		NLA_PUT_U32(msg, i, req->channels[i]->center_freq);
+	nla_nest_end(msg, nest);
+
+	if (req->ie)
+		NLA_PUT(msg, NL80211_ATTR_IE, req->ie_len, req->ie);
+
+	return 0;
+ nla_put_failure:
+	return -ENOBUFS;
+}
+
 static int nl80211_send_scan_donemsg(struct sk_buff *msg,
-				    struct cfg80211_registered_device *rdev,
-				    struct net_device *netdev,
-				    u32 pid, u32 seq, int flags,
-				    u32 cmd)
+				     struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev,
+				     u32 pid, u32 seq, int flags,
+				     u32 cmd)
 {
 	void *hdr;
 
@@ -3226,7 +3616,8 @@ static int nl80211_send_scan_donemsg(struct sk_buff *msg,
 	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
 	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
 
-	/* XXX: we should probably bounce back the request? */
+	/* ignore errors and send incomplete event anyway */
+	nl80211_add_scan_req(msg, rdev);
 
 	return genlmsg_end(msg, hdr);
 
@@ -3240,7 +3631,7 @@ void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
 {
 	struct sk_buff *msg;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3258,7 +3649,7 @@ void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
 {
 	struct sk_buff *msg;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3280,7 +3671,7 @@ void nl80211_send_reg_change_event(struct regulatory_request *request)
 	struct sk_buff *msg;
 	void *hdr;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3334,7 +3725,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev,
 	struct sk_buff *msg;
 	void *hdr;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
 	if (!msg)
 		return;
 
@@ -3375,38 +3766,208 @@ void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
 	nl80211_send_mlme_event(rdev, netdev, buf, len, NL80211_CMD_ASSOCIATE);
 }
 
-void nl80211_send_rx_deauth(struct cfg80211_registered_device *rdev,
-			    struct net_device *netdev, const u8 *buf,
-			    size_t len)
+void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
+			 struct net_device *netdev, const u8 *buf, size_t len)
 {
 	nl80211_send_mlme_event(rdev, netdev, buf, len,
 				NL80211_CMD_DEAUTHENTICATE);
 }
 
-void nl80211_send_rx_disassoc(struct cfg80211_registered_device *rdev,
-			      struct net_device *netdev, const u8 *buf,
-			      size_t len)
+void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
+			   struct net_device *netdev, const u8 *buf,
+			   size_t len)
 {
 	nl80211_send_mlme_event(rdev, netdev, buf, len,
 				NL80211_CMD_DISASSOCIATE);
 }
 
+static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
+				      struct net_device *netdev, int cmd,
+				      const u8 *addr)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	NLA_PUT_FLAG(msg, NL80211_ATTR_TIMED_OUT);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
+void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
+			       struct net_device *netdev, const u8 *addr)
+{
+	nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_AUTHENTICATE,
+				  addr);
+}
+
+void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev, const u8 *addr)
+{
+	nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_ASSOCIATE, addr);
+}
+
+void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, const u8 *bssid,
+			     gfp_t gfp)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_JOIN_IBSS);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
+void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
+				 struct net_device *netdev, const u8 *addr,
+				 enum nl80211_key_type key_type, int key_id,
+				 const u8 *tsc)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_MICHAEL_MIC_FAILURE);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	if (addr)
+		NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
+	NLA_PUT_U32(msg, NL80211_ATTR_KEY_TYPE, key_type);
+	NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id);
+	if (tsc)
+		NLA_PUT(msg, NL80211_ATTR_KEY_SEQ, 6, tsc);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
+void nl80211_send_beacon_hint_event(struct wiphy *wiphy,
+				    struct ieee80211_channel *channel_before,
+				    struct ieee80211_channel *channel_after)
+{
+	struct sk_buff *msg;
+	void *hdr;
+	struct nlattr *nl_freq;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_REG_BEACON_HINT);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	/*
+	 * Since we are applying the beacon hint to a wiphy we know its
+	 * wiphy_idx is valid
+	 */
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy));
+
+	/* Before */
+	nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_BEFORE);
+	if (!nl_freq)
+		goto nla_put_failure;
+	if (nl80211_msg_put_channel(msg, channel_before))
+		goto nla_put_failure;
+	nla_nest_end(msg, nl_freq);
+
+	/* After */
+	nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_AFTER);
+	if (!nl_freq)
+		goto nla_put_failure;
+	if (nl80211_msg_put_channel(msg, channel_after))
+		goto nla_put_failure;
+	nla_nest_end(msg, nl_freq);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_ATOMIC);
+
+	return;
+
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
 /* initialisation/exit functions */
 
 int nl80211_init(void)
 {
-	int err, i;
+	int err;
 
-	err = genl_register_family(&nl80211_fam);
+	err = genl_register_family_with_ops(&nl80211_fam,
+		nl80211_ops, ARRAY_SIZE(nl80211_ops));
 	if (err)
 		return err;
 
-	for (i = 0; i < ARRAY_SIZE(nl80211_ops); i++) {
-		err = genl_register_ops(&nl80211_fam, &nl80211_ops[i]);
-		if (err)
-			goto err_out;
-	}
-
 	err = genl_register_mc_group(&nl80211_fam, &nl80211_config_mcgrp);
 	if (err)
 		goto err_out;
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index b77af4ab80b..5c12ad13499 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -17,11 +17,31 @@ extern void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
 extern void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
 				  struct net_device *netdev,
 				  const u8 *buf, size_t len);
-extern void nl80211_send_rx_deauth(struct cfg80211_registered_device *rdev,
-				   struct net_device *netdev,
-				   const u8 *buf, size_t len);
-extern void nl80211_send_rx_disassoc(struct cfg80211_registered_device *rdev,
-				     struct net_device *netdev,
-				     const u8 *buf, size_t len);
+extern void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev,
+				const u8 *buf, size_t len);
+extern void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
+				  struct net_device *netdev,
+				  const u8 *buf, size_t len);
+extern void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
+				      struct net_device *netdev,
+				      const u8 *addr);
+extern void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
+				       struct net_device *netdev,
+				       const u8 *addr);
+extern void
+nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
+			    struct net_device *netdev, const u8 *addr,
+			    enum nl80211_key_type key_type,
+			    int key_id, const u8 *tsc);
+
+extern void
+nl80211_send_beacon_hint_event(struct wiphy *wiphy,
+			       struct ieee80211_channel *channel_before,
+			       struct ieee80211_channel *channel_after);
+
+void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, const u8 *bssid,
+			     gfp_t gfp);
 
 #endif /* __NET_WIRELESS_NL80211_H */
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 487cb627ddb..5e14371cda7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -37,7 +37,6 @@
 #include <linux/random.h>
 #include <linux/nl80211.h>
 #include <linux/platform_device.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 #include "core.h"
 #include "reg.h"
@@ -49,12 +48,6 @@ static struct regulatory_request *last_request;
 /* To trigger userspace events */
 static struct platform_device *reg_pdev;
 
-/* Keep the ordering from large to small */
-static u32 supported_bandwidths[] = {
-	MHZ_TO_KHZ(40),
-	MHZ_TO_KHZ(20),
-};
-
 /*
  * Central wireless core regulatory domains, we only need two,
  * the current one and a world regulatory domain in case we have no
@@ -389,6 +382,8 @@ static int call_crda(const char *alpha2)
 /* Used by nl80211 before kmalloc'ing our regulatory domain */
 bool reg_is_valid_request(const char *alpha2)
 {
+	assert_cfg80211_lock();
+
 	if (!last_request)
 		return false;
 
@@ -436,19 +431,20 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd)
 	return true;
 }
 
-/* Returns value in KHz */
-static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
-	u32 freq)
+static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
+			    u32 center_freq_khz,
+			    u32 bw_khz)
 {
-	unsigned int i;
-	for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) {
-		u32 start_freq_khz = freq - supported_bandwidths[i]/2;
-		u32 end_freq_khz = freq + supported_bandwidths[i]/2;
-		if (start_freq_khz >= freq_range->start_freq_khz &&
-			end_freq_khz <= freq_range->end_freq_khz)
-			return supported_bandwidths[i];
-	}
-	return 0;
+	u32 start_freq_khz, end_freq_khz;
+
+	start_freq_khz = center_freq_khz - (bw_khz/2);
+	end_freq_khz = center_freq_khz + (bw_khz/2);
+
+	if (start_freq_khz >= freq_range->start_freq_khz &&
+	    end_freq_khz <= freq_range->end_freq_khz)
+		return true;
+
+	return false;
 }
 
 /**
@@ -848,14 +844,17 @@ static u32 map_regdom_flags(u32 rd_flags)
 
 static int freq_reg_info_regd(struct wiphy *wiphy,
 			      u32 center_freq,
-			      u32 *bandwidth,
+			      u32 desired_bw_khz,
 			      const struct ieee80211_reg_rule **reg_rule,
 			      const struct ieee80211_regdomain *custom_regd)
 {
 	int i;
 	bool band_rule_found = false;
 	const struct ieee80211_regdomain *regd;
-	u32 max_bandwidth = 0;
+	bool bw_fits = false;
+
+	if (!desired_bw_khz)
+		desired_bw_khz = MHZ_TO_KHZ(20);
 
 	regd = custom_regd ? custom_regd : cfg80211_regdomain;
 
@@ -888,38 +887,54 @@ static int freq_reg_info_regd(struct wiphy *wiphy,
 		if (!band_rule_found)
 			band_rule_found = freq_in_rule_band(fr, center_freq);
 
-		max_bandwidth = freq_max_bandwidth(fr, center_freq);
+		bw_fits = reg_does_bw_fit(fr,
+					  center_freq,
+					  desired_bw_khz);
 
-		if (max_bandwidth && *bandwidth <= max_bandwidth) {
+		if (band_rule_found && bw_fits) {
 			*reg_rule = rr;
-			*bandwidth = max_bandwidth;
-			break;
+			return 0;
 		}
 	}
 
 	if (!band_rule_found)
 		return -ERANGE;
 
-	return !max_bandwidth;
+	return -EINVAL;
 }
 EXPORT_SYMBOL(freq_reg_info);
 
-int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
-			 const struct ieee80211_reg_rule **reg_rule)
+int freq_reg_info(struct wiphy *wiphy,
+		  u32 center_freq,
+		  u32 desired_bw_khz,
+		  const struct ieee80211_reg_rule **reg_rule)
 {
 	assert_cfg80211_lock();
-	return freq_reg_info_regd(wiphy, center_freq,
-		bandwidth, reg_rule, NULL);
+	return freq_reg_info_regd(wiphy,
+				  center_freq,
+				  desired_bw_khz,
+				  reg_rule,
+				  NULL);
 }
 
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel). To support
+ * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a
+ * new ieee80211_channel.target_bw and re run the regulatory check
+ * on the wiphy with the target_bw specified. Then we can simply use
+ * that below for the desired_bw_khz below.
+ */
 static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 			   unsigned int chan_idx)
 {
 	int r;
-	u32 flags;
-	u32 max_bandwidth = 0;
+	u32 flags, bw_flags = 0;
+	u32 desired_bw_khz = MHZ_TO_KHZ(20);
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
+	const struct ieee80211_freq_range *freq_range = NULL;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
 	struct wiphy *request_wiphy = NULL;
@@ -934,8 +949,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 
 	flags = chan->orig_flags;
 
-	r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
-		&max_bandwidth, &reg_rule);
+	r = freq_reg_info(wiphy,
+			  MHZ_TO_KHZ(chan->center_freq),
+			  desired_bw_khz,
+			  &reg_rule);
 
 	if (r) {
 		/*
@@ -978,6 +995,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 	}
 
 	power_rule = &reg_rule->power_rule;
+	freq_range = &reg_rule->freq_range;
+
+	if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40))
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 
 	if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
 	    request_wiphy && request_wiphy == wiphy &&
@@ -988,19 +1009,19 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 		 * settings
 		 */
 		chan->flags = chan->orig_flags =
-			map_regdom_flags(reg_rule->flags);
+			map_regdom_flags(reg_rule->flags) | bw_flags;
 		chan->max_antenna_gain = chan->orig_mag =
 			(int) MBI_TO_DBI(power_rule->max_antenna_gain);
-		chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+		chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
 		chan->max_power = chan->orig_mpwr =
 			(int) MBM_TO_DBM(power_rule->max_eirp);
 		return;
 	}
 
-	chan->flags = flags | map_regdom_flags(reg_rule->flags);
+	chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
 	chan->max_antenna_gain = min(chan->orig_mag,
 		(int) MBI_TO_DBI(power_rule->max_antenna_gain));
-	chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+	chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
 	if (chan->orig_mpwr)
 		chan->max_power = min(chan->orig_mpwr,
 			(int) MBM_TO_DBM(power_rule->max_eirp));
@@ -1050,18 +1071,10 @@ static void handle_reg_beacon(struct wiphy *wiphy,
 			      unsigned int chan_idx,
 			      struct reg_beacon *reg_beacon)
 {
-#ifdef CONFIG_CFG80211_REG_DEBUG
-#define REG_DEBUG_BEACON_FLAG(desc) \
-	printk(KERN_DEBUG "cfg80211: Enabling " desc " on " \
-		"frequency: %d MHz (Ch %d) on %s\n", \
-		reg_beacon->chan.center_freq, \
-		ieee80211_frequency_to_channel(reg_beacon->chan.center_freq), \
-		wiphy_name(wiphy));
-#else
-#define REG_DEBUG_BEACON_FLAG(desc) do {} while (0)
-#endif
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
+	bool channel_changed = false;
+	struct ieee80211_channel chan_before;
 
 	assert_cfg80211_lock();
 
@@ -1071,18 +1084,28 @@ static void handle_reg_beacon(struct wiphy *wiphy,
 	if (likely(chan->center_freq != reg_beacon->chan.center_freq))
 		return;
 
-	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+	if (chan->beacon_found)
+		return;
+
+	chan->beacon_found = true;
+
+	chan_before.center_freq = chan->center_freq;
+	chan_before.flags = chan->flags;
+
+	if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+	    !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
 		chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
-		REG_DEBUG_BEACON_FLAG("active scanning");
+		channel_changed = true;
 	}
 
-	if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
+	if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
+	    !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
 		chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
-		REG_DEBUG_BEACON_FLAG("beaconing");
+		channel_changed = true;
 	}
 
-	chan->beacon_found = true;
-#undef REG_DEBUG_BEACON_FLAG
+	if (channel_changed)
+		nl80211_send_beacon_hint_event(wiphy, &chan_before, chan);
 }
 
 /*
@@ -1155,6 +1178,93 @@ static void reg_process_beacons(struct wiphy *wiphy)
 	wiphy_update_beacon_reg(wiphy);
 }
 
+static bool is_ht40_not_allowed(struct ieee80211_channel *chan)
+{
+	if (!chan)
+		return true;
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		return true;
+	/* This would happen when regulatory rules disallow HT40 completely */
+	if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40)))
+		return true;
+	return false;
+}
+
+static void reg_process_ht_flags_channel(struct wiphy *wiphy,
+					 enum ieee80211_band band,
+					 unsigned int chan_idx)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *channel;
+	struct ieee80211_channel *channel_before = NULL, *channel_after = NULL;
+	unsigned int i;
+
+	assert_cfg80211_lock();
+
+	sband = wiphy->bands[band];
+	BUG_ON(chan_idx >= sband->n_channels);
+	channel = &sband->channels[chan_idx];
+
+	if (is_ht40_not_allowed(channel)) {
+		channel->flags |= IEEE80211_CHAN_NO_HT40;
+		return;
+	}
+
+	/*
+	 * We need to ensure the extension channels exist to
+	 * be able to use HT40- or HT40+, this finds them (or not)
+	 */
+	for (i = 0; i < sband->n_channels; i++) {
+		struct ieee80211_channel *c = &sband->channels[i];
+		if (c->center_freq == (channel->center_freq - 20))
+			channel_before = c;
+		if (c->center_freq == (channel->center_freq + 20))
+			channel_after = c;
+	}
+
+	/*
+	 * Please note that this assumes target bandwidth is 20 MHz,
+	 * if that ever changes we also need to change the below logic
+	 * to include that as well.
+	 */
+	if (is_ht40_not_allowed(channel_before))
+		channel->flags |= IEEE80211_CHAN_NO_HT40MINUS;
+	else
+		channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
+
+	if (is_ht40_not_allowed(channel_after))
+		channel->flags |= IEEE80211_CHAN_NO_HT40PLUS;
+	else
+		channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
+}
+
+static void reg_process_ht_flags_band(struct wiphy *wiphy,
+				      enum ieee80211_band band)
+{
+	unsigned int i;
+	struct ieee80211_supported_band *sband;
+
+	BUG_ON(!wiphy->bands[band]);
+	sband = wiphy->bands[band];
+
+	for (i = 0; i < sband->n_channels; i++)
+		reg_process_ht_flags_channel(wiphy, band, i);
+}
+
+static void reg_process_ht_flags(struct wiphy *wiphy)
+{
+	enum ieee80211_band band;
+
+	if (!wiphy)
+		return;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (wiphy->bands[band])
+			reg_process_ht_flags_band(wiphy, band);
+	}
+
+}
+
 void wiphy_update_regulatory(struct wiphy *wiphy,
 			     enum nl80211_reg_initiator initiator)
 {
@@ -1168,6 +1278,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy,
 	}
 out:
 	reg_process_beacons(wiphy);
+	reg_process_ht_flags(wiphy);
 	if (wiphy->reg_notifier)
 		wiphy->reg_notifier(wiphy, last_request);
 }
@@ -1178,9 +1289,11 @@ static void handle_channel_custom(struct wiphy *wiphy,
 				  const struct ieee80211_regdomain *regd)
 {
 	int r;
-	u32 max_bandwidth = 0;
+	u32 desired_bw_khz = MHZ_TO_KHZ(20);
+	u32 bw_flags = 0;
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
+	const struct ieee80211_freq_range *freq_range = NULL;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
 
@@ -1190,8 +1303,11 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	BUG_ON(chan_idx >= sband->n_channels);
 	chan = &sband->channels[chan_idx];
 
-	r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq),
-		&max_bandwidth, &reg_rule, regd);
+	r = freq_reg_info_regd(wiphy,
+			       MHZ_TO_KHZ(chan->center_freq),
+			       desired_bw_khz,
+			       &reg_rule,
+			       regd);
 
 	if (r) {
 		chan->flags = IEEE80211_CHAN_DISABLED;
@@ -1199,10 +1315,14 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	}
 
 	power_rule = &reg_rule->power_rule;
+	freq_range = &reg_rule->freq_range;
+
+	if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40))
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 
-	chan->flags |= map_regdom_flags(reg_rule->flags);
+	chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
 	chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
-	chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+	chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
 	chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
 }
 
@@ -1224,13 +1344,22 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
 				   const struct ieee80211_regdomain *regd)
 {
 	enum ieee80211_band band;
+	unsigned int bands_set = 0;
 
 	mutex_lock(&cfg80211_mutex);
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
-		if (wiphy->bands[band])
-			handle_band_custom(wiphy, band, regd);
+		if (!wiphy->bands[band])
+			continue;
+		handle_band_custom(wiphy, band, regd);
+		bands_set++;
 	}
 	mutex_unlock(&cfg80211_mutex);
+
+	/*
+	 * no point in calling this if it won't have any effect
+	 * on your device's supportd bands.
+	 */
+	WARN_ON(!bands_set);
 }
 EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
 
@@ -2000,7 +2129,12 @@ static int __set_regdom(const struct ieee80211_regdomain *rd)
 		 * driver wanted to the wiphy to deal with conflicts
 		 */
 
-		BUG_ON(request_wiphy->regd);
+		/*
+		 * Userspace could have sent two replies with only
+		 * one kernel request.
+		 */
+		if (request_wiphy->regd)
+			return -EALREADY;
 
 		r = reg_copy_regd(&request_wiphy->regd, rd);
 		if (r)
@@ -2042,7 +2176,13 @@ static int __set_regdom(const struct ieee80211_regdomain *rd)
 	 * the country IE rd with what CRDA believes that country should have
 	 */
 
-	BUG_ON(!country_ie_regdomain);
+	/*
+	 * Userspace could have sent two replies with only
+	 * one kernel request. By the second reply we would have
+	 * already processed and consumed the country_ie_regdomain.
+	 */
+	if (!country_ie_regdomain)
+		return -EALREADY;
 	BUG_ON(rd == country_ie_regdomain);
 
 	/*
@@ -2119,14 +2259,14 @@ void reg_device_remove(struct wiphy *wiphy)
 
 	assert_cfg80211_lock();
 
+	kfree(wiphy->regd);
+
 	if (last_request)
 		request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
 
-	kfree(wiphy->regd);
-	if (!last_request || !request_wiphy)
-		return;
-	if (request_wiphy != wiphy)
+	if (!request_wiphy || request_wiphy != wiphy)
 		return;
+
 	last_request->wiphy_idx = WIPHY_IDX_STALE;
 	last_request->country_ie_env = ENVIRON_ANY;
 }
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 1f260c40b6c..e95b638b919 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -29,13 +29,14 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 		goto out;
 
 	WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
-	wiphy_to_dev(request->wiphy)->scan_req = NULL;
 
 	if (aborted)
 		nl80211_send_scan_aborted(wiphy_to_dev(request->wiphy), dev);
 	else
 		nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
 
+	wiphy_to_dev(request->wiphy)->scan_req = NULL;
+
 #ifdef CONFIG_WIRELESS_EXT
 	if (!aborted) {
 		memset(&wrqu, 0, sizeof(wrqu));
@@ -377,18 +378,16 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 			size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
 			size_t ielen = res->pub.len_information_elements;
 
-			if (ksize(found) >= used + ielen) {
+			if (!found->ies_allocated && ksize(found) >= used + ielen) {
 				memcpy(found->pub.information_elements,
 				       res->pub.information_elements, ielen);
 				found->pub.len_information_elements = ielen;
 			} else {
 				u8 *ies = found->pub.information_elements;
 
-				if (found->ies_allocated) {
-					if (ksize(ies) < ielen)
-						ies = krealloc(ies, ielen,
-							       GFP_ATOMIC);
-				} else
+				if (found->ies_allocated)
+					ies = krealloc(ies, ielen, GFP_ATOMIC);
+				else
 					ies = kmalloc(ielen, GFP_ATOMIC);
 
 				if (ies) {
@@ -415,6 +414,55 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 	return found;
 }
 
+struct cfg80211_bss*
+cfg80211_inform_bss(struct wiphy *wiphy,
+		    struct ieee80211_channel *channel,
+		    const u8 *bssid,
+		    u64 timestamp, u16 capability, u16 beacon_interval,
+		    const u8 *ie, size_t ielen,
+		    s32 signal, gfp_t gfp)
+{
+	struct cfg80211_internal_bss *res;
+	size_t privsz;
+
+	if (WARN_ON(!wiphy))
+		return NULL;
+
+	privsz = wiphy->bss_priv_size;
+
+	if (WARN_ON(wiphy->signal_type == NL80211_BSS_SIGNAL_UNSPEC &&
+			(signal < 0 || signal > 100)))
+		return NULL;
+
+	res = kzalloc(sizeof(*res) + privsz + ielen, gfp);
+	if (!res)
+		return NULL;
+
+	memcpy(res->pub.bssid, bssid, ETH_ALEN);
+	res->pub.channel = channel;
+	res->pub.signal = signal;
+	res->pub.tsf = timestamp;
+	res->pub.beacon_interval = beacon_interval;
+	res->pub.capability = capability;
+	/* point to after the private area */
+	res->pub.information_elements = (u8 *)res + sizeof(*res) + privsz;
+	memcpy(res->pub.information_elements, ie, ielen);
+	res->pub.len_information_elements = ielen;
+
+	kref_init(&res->ref);
+
+	res = cfg80211_bss_update(wiphy_to_dev(wiphy), res, 0);
+	if (!res)
+		return NULL;
+
+	if (res->pub.capability & WLAN_CAPABILITY_ESS)
+		regulatory_hint_found_beacon(wiphy, channel, gfp);
+
+	/* cfg80211_bss_update gives us a referenced result */
+	return &res->pub;
+}
+EXPORT_SYMBOL(cfg80211_inform_bss);
+
 struct cfg80211_bss *
 cfg80211_inform_bss_frame(struct wiphy *wiphy,
 			  struct ieee80211_channel *channel,
@@ -605,7 +653,7 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	cfg80211_put_dev(rdev);
 	return err;
 }
-EXPORT_SYMBOL(cfg80211_wext_siwscan);
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwscan);
 
 static void ieee80211_scan_add_ies(struct iw_request_info *info,
 				   struct cfg80211_bss *bss,
@@ -914,5 +962,5 @@ int cfg80211_wext_giwscan(struct net_device *dev,
 	cfg80211_put_dev(rdev);
 	return res;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwscan);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwscan);
 #endif
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 487cdd9bcff..25550692dda 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1,10 +1,12 @@
 /*
  * Wireless utility functions
  *
- * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net>
  */
-#include <net/wireless.h>
-#include <asm/bitops.h>
+#include <linux/bitops.h>
+#include <linux/etherdevice.h>
+#include <net/cfg80211.h>
+#include <net/ip.h>
 #include "core.h"
 
 struct ieee80211_rate *
@@ -138,3 +140,365 @@ void ieee80211_set_bitrate_flags(struct wiphy *wiphy)
 		if (wiphy->bands[band])
 			set_mandatory_flags_band(wiphy->bands[band], band);
 }
+
+int cfg80211_validate_key_settings(struct key_params *params, int key_idx,
+				   const u8 *mac_addr)
+{
+	if (key_idx > 5)
+		return -EINVAL;
+
+	/*
+	 * Disallow pairwise keys with non-zero index unless it's WEP
+	 * (because current deployments use pairwise WEP keys with
+	 * non-zero indizes but 802.11i clearly specifies to use zero)
+	 */
+	if (mac_addr && key_idx &&
+	    params->cipher != WLAN_CIPHER_SUITE_WEP40 &&
+	    params->cipher != WLAN_CIPHER_SUITE_WEP104)
+		return -EINVAL;
+
+	switch (params->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+		if (params->key_len != WLAN_KEY_LEN_WEP40)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		if (params->key_len != WLAN_KEY_LEN_TKIP)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		if (params->key_len != WLAN_KEY_LEN_CCMP)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_WEP104:
+		if (params->key_len != WLAN_KEY_LEN_WEP104)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		if (params->key_len != WLAN_KEY_LEN_AES_CMAC)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (params->seq) {
+		switch (params->cipher) {
+		case WLAN_CIPHER_SUITE_WEP40:
+		case WLAN_CIPHER_SUITE_WEP104:
+			/* These ciphers do not use key sequence */
+			return -EINVAL;
+		case WLAN_CIPHER_SUITE_TKIP:
+		case WLAN_CIPHER_SUITE_CCMP:
+		case WLAN_CIPHER_SUITE_AES_CMAC:
+			if (params->seq_len != 6)
+				return -EINVAL;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
+/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
+const unsigned char rfc1042_header[] __aligned(2) =
+	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+EXPORT_SYMBOL(rfc1042_header);
+
+/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
+const unsigned char bridge_tunnel_header[] __aligned(2) =
+	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+EXPORT_SYMBOL(bridge_tunnel_header);
+
+unsigned int ieee80211_hdrlen(__le16 fc)
+{
+	unsigned int hdrlen = 24;
+
+	if (ieee80211_is_data(fc)) {
+		if (ieee80211_has_a4(fc))
+			hdrlen = 30;
+		if (ieee80211_is_data_qos(fc))
+			hdrlen += IEEE80211_QOS_CTL_LEN;
+		goto out;
+	}
+
+	if (ieee80211_is_ctl(fc)) {
+		/*
+		 * ACK and CTS are 10 bytes, all others 16. To see how
+		 * to get this condition consider
+		 *   subtype mask:   0b0000000011110000 (0x00F0)
+		 *   ACK subtype:    0b0000000011010000 (0x00D0)
+		 *   CTS subtype:    0b0000000011000000 (0x00C0)
+		 *   bits that matter:         ^^^      (0x00E0)
+		 *   value of those: 0b0000000011000000 (0x00C0)
+		 */
+		if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
+			hdrlen = 10;
+		else
+			hdrlen = 16;
+	}
+out:
+	return hdrlen;
+}
+EXPORT_SYMBOL(ieee80211_hdrlen);
+
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
+{
+	const struct ieee80211_hdr *hdr =
+			(const struct ieee80211_hdr *)skb->data;
+	unsigned int hdrlen;
+
+	if (unlikely(skb->len < 10))
+		return 0;
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	if (unlikely(hdrlen > skb->len))
+		return 0;
+	return hdrlen;
+}
+EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
+
+static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+{
+	int ae = meshhdr->flags & MESH_FLAGS_AE;
+	/* 7.1.3.5a.2 */
+	switch (ae) {
+	case 0:
+		return 6;
+	case 1:
+		return 12;
+	case 2:
+		return 18;
+	case 3:
+		return 24;
+	default:
+		return 6;
+	}
+}
+
+int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr,
+			   enum nl80211_iftype iftype)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	u16 hdrlen, ethertype;
+	u8 *payload;
+	u8 dst[ETH_ALEN];
+	u8 src[ETH_ALEN] __aligned(2);
+
+	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
+		return -1;
+
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
+	 * header
+	 * IEEE 802.11 address fields:
+	 * ToDS FromDS Addr1 Addr2 Addr3 Addr4
+	 *   0     0   DA    SA    BSSID n/a
+	 *   0     1   DA    BSSID SA    n/a
+	 *   1     0   BSSID SA    DA    n/a
+	 *   1     1   RA    TA    DA    SA
+	 */
+	memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
+	memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
+
+	switch (hdr->frame_control &
+		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+	case cpu_to_le16(IEEE80211_FCTL_TODS):
+		if (unlikely(iftype != NL80211_IFTYPE_AP &&
+			     iftype != NL80211_IFTYPE_AP_VLAN))
+			return -1;
+		break;
+	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
+		if (unlikely(iftype != NL80211_IFTYPE_WDS &&
+			     iftype != NL80211_IFTYPE_MESH_POINT))
+			return -1;
+		if (iftype == NL80211_IFTYPE_MESH_POINT) {
+			struct ieee80211s_hdr *meshdr =
+				(struct ieee80211s_hdr *) (skb->data + hdrlen);
+			hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
+			if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
+				memcpy(dst, meshdr->eaddr1, ETH_ALEN);
+				memcpy(src, meshdr->eaddr2, ETH_ALEN);
+			}
+		}
+		break;
+	case cpu_to_le16(IEEE80211_FCTL_FROMDS):
+		if (iftype != NL80211_IFTYPE_STATION ||
+		    (is_multicast_ether_addr(dst) &&
+		     !compare_ether_addr(src, addr)))
+			return -1;
+		break;
+	case cpu_to_le16(0):
+		if (iftype != NL80211_IFTYPE_ADHOC)
+			return -1;
+		break;
+	}
+
+	if (unlikely(skb->len - hdrlen < 8))
+		return -1;
+
+	payload = skb->data + hdrlen;
+	ethertype = (payload[6] << 8) | payload[7];
+
+	if (likely((compare_ether_addr(payload, rfc1042_header) == 0 &&
+		    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+		   compare_ether_addr(payload, bridge_tunnel_header) == 0)) {
+		/* remove RFC1042 or Bridge-Tunnel encapsulation and
+		 * replace EtherType */
+		skb_pull(skb, hdrlen + 6);
+		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+	} else {
+		struct ethhdr *ehdr;
+		__be16 len;
+
+		skb_pull(skb, hdrlen);
+		len = htons(skb->len);
+		ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
+		memcpy(ehdr->h_dest, dst, ETH_ALEN);
+		memcpy(ehdr->h_source, src, ETH_ALEN);
+		ehdr->h_proto = len;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ieee80211_data_to_8023);
+
+int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr,
+			     enum nl80211_iftype iftype, u8 *bssid, bool qos)
+{
+	struct ieee80211_hdr hdr;
+	u16 hdrlen, ethertype;
+	__le16 fc;
+	const u8 *encaps_data;
+	int encaps_len, skip_header_bytes;
+	int nh_pos, h_pos;
+	int head_need;
+
+	if (unlikely(skb->len < ETH_HLEN))
+		return -EINVAL;
+
+	nh_pos = skb_network_header(skb) - skb->data;
+	h_pos = skb_transport_header(skb) - skb->data;
+
+	/* convert Ethernet header to proper 802.11 header (based on
+	 * operation mode) */
+	ethertype = (skb->data[12] << 8) | skb->data[13];
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
+
+	switch (iftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
+		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
+		/* DA BSSID SA */
+		memcpy(hdr.addr1, skb->data, ETH_ALEN);
+		memcpy(hdr.addr2, addr, ETH_ALEN);
+		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
+		hdrlen = 24;
+		break;
+	case NL80211_IFTYPE_STATION:
+		fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
+		/* BSSID SA DA */
+		memcpy(hdr.addr1, bssid, ETH_ALEN);
+		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+		memcpy(hdr.addr3, skb->data, ETH_ALEN);
+		hdrlen = 24;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		/* DA SA BSSID */
+		memcpy(hdr.addr1, skb->data, ETH_ALEN);
+		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+		memcpy(hdr.addr3, bssid, ETH_ALEN);
+		hdrlen = 24;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (qos) {
+		fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+		hdrlen += 2;
+	}
+
+	hdr.frame_control = fc;
+	hdr.duration_id = 0;
+	hdr.seq_ctrl = 0;
+
+	skip_header_bytes = ETH_HLEN;
+	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
+		encaps_data = bridge_tunnel_header;
+		encaps_len = sizeof(bridge_tunnel_header);
+		skip_header_bytes -= 2;
+	} else if (ethertype > 0x600) {
+		encaps_data = rfc1042_header;
+		encaps_len = sizeof(rfc1042_header);
+		skip_header_bytes -= 2;
+	} else {
+		encaps_data = NULL;
+		encaps_len = 0;
+	}
+
+	skb_pull(skb, skip_header_bytes);
+	nh_pos -= skip_header_bytes;
+	h_pos -= skip_header_bytes;
+
+	head_need = hdrlen + encaps_len - skb_headroom(skb);
+
+	if (head_need > 0 || skb_cloned(skb)) {
+		head_need = max(head_need, 0);
+		if (head_need)
+			skb_orphan(skb);
+
+		if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC)) {
+			printk(KERN_ERR "failed to reallocate Tx buffer\n");
+			return -ENOMEM;
+		}
+		skb->truesize += head_need;
+	}
+
+	if (encaps_data) {
+		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
+		nh_pos += encaps_len;
+		h_pos += encaps_len;
+	}
+
+	memcpy(skb_push(skb, hdrlen), &hdr, hdrlen);
+
+	nh_pos += hdrlen;
+	h_pos += hdrlen;
+
+	/* Update skb pointers to various headers since this modified frame
+	 * is going to go through Linux networking code that may potentially
+	 * need things like pointer to IP header. */
+	skb_set_mac_header(skb, 0);
+	skb_set_network_header(skb, nh_pos);
+	skb_set_transport_header(skb, h_pos);
+
+	return 0;
+}
+EXPORT_SYMBOL(ieee80211_data_from_8023);
+
+/* Given a data frame determine the 802.1p/1d tag to use. */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb)
+{
+	unsigned int dscp;
+
+	/* skb->priority values from 256->263 are magic values to
+	 * directly indicate a specific 802.1d priority.  This is used
+	 * to allow 802.1d priority to be passed directly in from VLAN
+	 * tags, etc.
+	 */
+	if (skb->priority >= 256 && skb->priority <= 263)
+		return skb->priority - 256;
+
+	switch (skb->protocol) {
+	case htons(ETH_P_IP):
+		dscp = ip_hdr(skb)->tos & 0xfc;
+		break;
+	default:
+		return 0;
+	}
+
+	return dscp >> 5;
+}
+EXPORT_SYMBOL(cfg80211_classify8021d);
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 0fd1db6e95b..d030c531567 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -5,13 +5,14 @@
  * into cfg80211, when that happens all the exports here go away and
  * we directly assign the wireless handlers of wireless interfaces.
  *
- * Copyright 2008	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/wireless.h>
 #include <linux/nl80211.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
 #include <net/iw_handler.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 #include "core.h"
 
@@ -57,7 +58,7 @@ int cfg80211_wext_giwname(struct net_device *dev,
 
 	return 0;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwname);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwname);
 
 int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
 			  u32 *mode, char *extra)
@@ -108,7 +109,7 @@ int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
 
 	return ret;
 }
-EXPORT_SYMBOL(cfg80211_wext_siwmode);
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwmode);
 
 int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
 			  u32 *mode, char *extra)
@@ -143,7 +144,7 @@ int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
 	}
 	return 0;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwmode);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwmode);
 
 
 int cfg80211_wext_giwrange(struct net_device *dev,
@@ -206,7 +207,6 @@ int cfg80211_wext_giwrange(struct net_device *dev,
 	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
 			  IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
 
-
 	for (band = 0; band < IEEE80211_NUM_BANDS; band ++) {
 		int i;
 		struct ieee80211_supported_band *sband;
@@ -240,4 +240,590 @@ int cfg80211_wext_giwrange(struct net_device *dev,
 
 	return 0;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwrange);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwrange);
+
+int cfg80211_wext_siwmlme(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct iw_mlme *mlme = (struct iw_mlme *)extra;
+	struct cfg80211_registered_device *rdev;
+	union {
+		struct cfg80211_disassoc_request disassoc;
+		struct cfg80211_deauth_request deauth;
+	} cmd;
+
+	if (!wdev)
+		return -EOPNOTSUPP;
+
+	rdev = wiphy_to_dev(wdev->wiphy);
+
+	if (wdev->iftype != NL80211_IFTYPE_STATION)
+		return -EINVAL;
+
+	if (mlme->addr.sa_family != ARPHRD_ETHER)
+		return -EINVAL;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	switch (mlme->cmd) {
+	case IW_MLME_DEAUTH:
+		if (!rdev->ops->deauth)
+			return -EOPNOTSUPP;
+		cmd.deauth.peer_addr = mlme->addr.sa_data;
+		cmd.deauth.reason_code = mlme->reason_code;
+		return rdev->ops->deauth(wdev->wiphy, dev, &cmd.deauth);
+	case IW_MLME_DISASSOC:
+		if (!rdev->ops->disassoc)
+			return -EOPNOTSUPP;
+		cmd.disassoc.peer_addr = mlme->addr.sa_data;
+		cmd.disassoc.reason_code = mlme->reason_code;
+		return rdev->ops->disassoc(wdev->wiphy, dev, &cmd.disassoc);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwmlme);
+
+
+/**
+ * cfg80211_wext_freq - get wext frequency for non-"auto"
+ * @wiphy: the wiphy
+ * @freq: the wext freq encoding
+ *
+ * Returns a channel, %NULL for auto, or an ERR_PTR for errors!
+ */
+struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
+					     struct iw_freq *freq)
+{
+	struct ieee80211_channel *chan;
+	int f;
+
+	/*
+	 * Parse frequency - return NULL for auto and
+	 * -EINVAL for impossible things.
+	 */
+	if (freq->e == 0) {
+		if (freq->m < 0)
+			return NULL;
+		f = ieee80211_channel_to_frequency(freq->m);
+	} else {
+		int i, div = 1000000;
+		for (i = 0; i < freq->e; i++)
+			div /= 10;
+		if (div <= 0)
+			return ERR_PTR(-EINVAL);
+		f = freq->m / div;
+	}
+
+	/*
+	 * Look up channel struct and return -EINVAL when
+	 * it cannot be found.
+	 */
+	chan = ieee80211_get_channel(wiphy, f);
+	if (!chan)
+		return ERR_PTR(-EINVAL);
+	return chan;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_freq);
+
+int cfg80211_wext_siwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	u32 orts = wdev->wiphy->rts_threshold;
+	int err;
+
+	if (rts->disabled || !rts->fixed)
+		wdev->wiphy->rts_threshold = (u32) -1;
+	else if (rts->value < 0)
+		return -EINVAL;
+	else
+		wdev->wiphy->rts_threshold = rts->value;
+
+	err = rdev->ops->set_wiphy_params(wdev->wiphy,
+					  WIPHY_PARAM_RTS_THRESHOLD);
+	if (err)
+		wdev->wiphy->rts_threshold = orts;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwrts);
+
+int cfg80211_wext_giwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	rts->value = wdev->wiphy->rts_threshold;
+	rts->disabled = rts->value == (u32) -1;
+	rts->fixed = 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwrts);
+
+int cfg80211_wext_siwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	u32 ofrag = wdev->wiphy->frag_threshold;
+	int err;
+
+	if (frag->disabled || !frag->fixed)
+		wdev->wiphy->frag_threshold = (u32) -1;
+	else if (frag->value < 256)
+		return -EINVAL;
+	else {
+		/* Fragment length must be even, so strip LSB. */
+		wdev->wiphy->frag_threshold = frag->value & ~0x1;
+	}
+
+	err = rdev->ops->set_wiphy_params(wdev->wiphy,
+					  WIPHY_PARAM_FRAG_THRESHOLD);
+	if (err)
+		wdev->wiphy->frag_threshold = ofrag;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwfrag);
+
+int cfg80211_wext_giwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	frag->value = wdev->wiphy->frag_threshold;
+	frag->disabled = frag->value == (u32) -1;
+	frag->fixed = 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwfrag);
+
+int cfg80211_wext_siwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	u32 changed = 0;
+	u8 olong = wdev->wiphy->retry_long;
+	u8 oshort = wdev->wiphy->retry_short;
+	int err;
+
+	if (retry->disabled ||
+	    (retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
+		return -EINVAL;
+
+	if (retry->flags & IW_RETRY_LONG) {
+		wdev->wiphy->retry_long = retry->value;
+		changed |= WIPHY_PARAM_RETRY_LONG;
+	} else if (retry->flags & IW_RETRY_SHORT) {
+		wdev->wiphy->retry_short = retry->value;
+		changed |= WIPHY_PARAM_RETRY_SHORT;
+	} else {
+		wdev->wiphy->retry_short = retry->value;
+		wdev->wiphy->retry_long = retry->value;
+		changed |= WIPHY_PARAM_RETRY_LONG;
+		changed |= WIPHY_PARAM_RETRY_SHORT;
+	}
+
+	if (!changed)
+		return 0;
+
+	err = rdev->ops->set_wiphy_params(wdev->wiphy, changed);
+	if (err) {
+		wdev->wiphy->retry_short = oshort;
+		wdev->wiphy->retry_long = olong;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwretry);
+
+int cfg80211_wext_giwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	retry->disabled = 0;
+
+	if (retry->flags == 0 || (retry->flags & IW_RETRY_SHORT)) {
+		/*
+		 * First return short value, iwconfig will ask long value
+		 * later if needed
+		 */
+		retry->flags |= IW_RETRY_LIMIT;
+		retry->value = wdev->wiphy->retry_short;
+		if (wdev->wiphy->retry_long != wdev->wiphy->retry_short)
+			retry->flags |= IW_RETRY_LONG;
+
+		return 0;
+	}
+
+	if (retry->flags & IW_RETRY_LONG) {
+		retry->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+		retry->value = wdev->wiphy->retry_long;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwretry);
+
+static int cfg80211_set_encryption(struct cfg80211_registered_device *rdev,
+				   struct net_device *dev, const u8 *addr,
+				   bool remove, bool tx_key, int idx,
+				   struct key_params *params)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC) {
+		if (!rdev->ops->set_default_mgmt_key)
+			return -EOPNOTSUPP;
+
+		if (idx < 4 || idx > 5)
+			return -EINVAL;
+	} else if (idx < 0 || idx > 3)
+		return -EINVAL;
+
+	if (remove) {
+		err = rdev->ops->del_key(&rdev->wiphy, dev, idx, addr);
+		if (!err) {
+			if (idx == wdev->wext.default_key)
+				wdev->wext.default_key = -1;
+			else if (idx == wdev->wext.default_mgmt_key)
+				wdev->wext.default_mgmt_key = -1;
+		}
+		/*
+		 * Applications using wireless extensions expect to be
+		 * able to delete keys that don't exist, so allow that.
+		 */
+		if (err == -ENOENT)
+			return 0;
+
+		return err;
+	} else {
+		if (addr)
+			tx_key = false;
+
+		if (cfg80211_validate_key_settings(params, idx, addr))
+			return -EINVAL;
+
+		err = rdev->ops->add_key(&rdev->wiphy, dev, idx, addr, params);
+		if (err)
+			return err;
+
+		if (tx_key || (!addr && wdev->wext.default_key == -1)) {
+			err = rdev->ops->set_default_key(&rdev->wiphy,
+							 dev, idx);
+			if (!err)
+				wdev->wext.default_key = idx;
+			return err;
+		}
+
+		if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC &&
+		    (tx_key || (!addr && wdev->wext.default_mgmt_key == -1))) {
+			err = rdev->ops->set_default_mgmt_key(&rdev->wiphy,
+							      dev, idx);
+			if (!err)
+				wdev->wext.default_mgmt_key = idx;
+			return err;
+		}
+
+		return 0;
+	}
+}
+
+int cfg80211_wext_siwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	int idx, err;
+	bool remove = false;
+	struct key_params params;
+
+	/* no use -- only MFP (set_default_mgmt_key) is optional */
+	if (!rdev->ops->del_key ||
+	    !rdev->ops->add_key ||
+	    !rdev->ops->set_default_key)
+		return -EOPNOTSUPP;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx == 0) {
+		idx = wdev->wext.default_key;
+		if (idx < 0)
+			idx = 0;
+	} else if (idx < 1 || idx > 4)
+		return -EINVAL;
+	else
+		idx--;
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = true;
+	else if (erq->length == 0) {
+		/* No key data - just set the default TX key index */
+		err = rdev->ops->set_default_key(&rdev->wiphy, dev, idx);
+		if (!err)
+			wdev->wext.default_key = idx;
+		return err;
+	}
+
+	memset(&params, 0, sizeof(params));
+	params.key = keybuf;
+	params.key_len = erq->length;
+	if (erq->length == 5)
+		params.cipher = WLAN_CIPHER_SUITE_WEP40;
+	else if (erq->length == 13)
+		params.cipher = WLAN_CIPHER_SUITE_WEP104;
+	else if (!remove)
+		return -EINVAL;
+
+	return cfg80211_set_encryption(rdev, dev, NULL, remove,
+				       wdev->wext.default_key == -1,
+				       idx, &params);
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwencode);
+
+int cfg80211_wext_siwencodeext(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *erq, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
+	const u8 *addr;
+	int idx;
+	bool remove = false;
+	struct key_params params;
+	u32 cipher;
+
+	/* no use -- only MFP (set_default_mgmt_key) is optional */
+	if (!rdev->ops->del_key ||
+	    !rdev->ops->add_key ||
+	    !rdev->ops->set_default_key)
+		return -EOPNOTSUPP;
+
+	switch (ext->alg) {
+	case IW_ENCODE_ALG_NONE:
+		remove = true;
+		cipher = 0;
+		break;
+	case IW_ENCODE_ALG_WEP:
+		if (ext->key_len == 5)
+			cipher = WLAN_CIPHER_SUITE_WEP40;
+		else if (ext->key_len == 13)
+			cipher = WLAN_CIPHER_SUITE_WEP104;
+		else
+			return -EINVAL;
+		break;
+	case IW_ENCODE_ALG_TKIP:
+		cipher = WLAN_CIPHER_SUITE_TKIP;
+		break;
+	case IW_ENCODE_ALG_CCMP:
+		cipher = WLAN_CIPHER_SUITE_CCMP;
+		break;
+	case IW_ENCODE_ALG_AES_CMAC:
+		cipher = WLAN_CIPHER_SUITE_AES_CMAC;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = true;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (cipher == WLAN_CIPHER_SUITE_AES_CMAC) {
+		if (idx < 4 || idx > 5) {
+			idx = wdev->wext.default_mgmt_key;
+			if (idx < 0)
+				return -EINVAL;
+		} else
+			idx--;
+	} else {
+		if (idx < 1 || idx > 4) {
+			idx = wdev->wext.default_key;
+			if (idx < 0)
+				return -EINVAL;
+		} else
+			idx--;
+	}
+
+	addr = ext->addr.sa_data;
+	if (is_broadcast_ether_addr(addr))
+		addr = NULL;
+
+	memset(&params, 0, sizeof(params));
+	params.key = ext->key;
+	params.key_len = ext->key_len;
+	params.cipher = cipher;
+
+	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+		params.seq = ext->rx_seq;
+		params.seq_len = 6;
+	}
+
+	return cfg80211_set_encryption(
+			rdev, dev, addr, remove,
+			ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
+			idx, &params);
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwencodeext);
+
+struct giwencode_cookie {
+	size_t buflen;
+	char *keybuf;
+};
+
+static void giwencode_get_key_cb(void *cookie, struct key_params *params)
+{
+	struct giwencode_cookie *data = cookie;
+
+	if (!params->key) {
+		data->buflen = 0;
+		return;
+	}
+
+	data->buflen = min_t(size_t, data->buflen, params->key_len);
+	memcpy(data->keybuf, params->key, data->buflen);
+}
+
+int cfg80211_wext_giwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	int idx, err;
+	struct giwencode_cookie data = {
+		.keybuf = keybuf,
+		.buflen = erq->length,
+	};
+
+	if (!rdev->ops->get_key)
+		return -EOPNOTSUPP;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx == 0) {
+		idx = wdev->wext.default_key;
+		if (idx < 0)
+			idx = 0;
+	} else if (idx < 1 || idx > 4)
+		return -EINVAL;
+	else
+		idx--;
+
+	erq->flags = idx + 1;
+
+	err = rdev->ops->get_key(&rdev->wiphy, dev, idx, NULL, &data,
+				 giwencode_get_key_cb);
+	if (!err) {
+		erq->length = data.buflen;
+		erq->flags |= IW_ENCODE_ENABLED;
+		return 0;
+	}
+
+	if (err == -ENOENT) {
+		erq->flags |= IW_ENCODE_DISABLED;
+		erq->length = 0;
+		return 0;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwencode);
+
+int cfg80211_wext_siwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	enum tx_power_setting type;
+	int dbm = 0;
+
+	if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
+		return -EINVAL;
+	if (data->txpower.flags & IW_TXPOW_RANGE)
+		return -EINVAL;
+
+	if (!rdev->ops->set_tx_power)
+		return -EOPNOTSUPP;
+
+	/* only change when not disabling */
+	if (!data->txpower.disabled) {
+		rfkill_set_sw_state(rdev->rfkill, false);
+
+		if (data->txpower.fixed) {
+			/*
+			 * wext doesn't support negative values, see
+			 * below where it's for automatic
+			 */
+			if (data->txpower.value < 0)
+				return -EINVAL;
+			dbm = data->txpower.value;
+			type = TX_POWER_FIXED;
+			/* TODO: do regulatory check! */
+		} else {
+			/*
+			 * Automatic power level setting, max being the value
+			 * passed in from userland.
+			 */
+			if (data->txpower.value < 0) {
+				type = TX_POWER_AUTOMATIC;
+			} else {
+				dbm = data->txpower.value;
+				type = TX_POWER_LIMITED;
+			}
+		}
+	} else {
+		rfkill_set_sw_state(rdev->rfkill, true);
+		schedule_work(&rdev->rfkill_sync);
+		return 0;
+	}
+
+	return rdev->ops->set_tx_power(wdev->wiphy, type, dbm);;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwtxpower);
+
+int cfg80211_wext_giwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	int err, val;
+
+	if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
+		return -EINVAL;
+	if (data->txpower.flags & IW_TXPOW_RANGE)
+		return -EINVAL;
+
+	if (!rdev->ops->get_tx_power)
+		return -EOPNOTSUPP;
+
+	err = rdev->ops->get_tx_power(wdev->wiphy, &val);
+	if (err)
+		return err;
+
+	/* well... oh well */
+	data->txpower.fixed = 1;
+	data->txpower.disabled = rfkill_blocked(rdev->rfkill);
+	data->txpower.value = val;
+	data->txpower.flags = IW_TXPOW_DBM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwtxpower);
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index 0e59f9ae9b8..252c2010c2e 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -636,8 +636,10 @@ static void wireless_seq_printf_stats(struct seq_file *seq,
 /*
  * Print info for /proc/net/wireless (print all entries)
  */
-static int wireless_seq_show(struct seq_file *seq, void *v)
+static int wireless_dev_seq_show(struct seq_file *seq, void *v)
 {
+	might_sleep();
+
 	if (v == SEQ_START_TOKEN)
 		seq_printf(seq, "Inter-| sta-|   Quality        |   Discarded "
 				"packets               | Missed | WE\n"
@@ -649,14 +651,46 @@ static int wireless_seq_show(struct seq_file *seq, void *v)
 	return 0;
 }
 
+static void *wireless_dev_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+	loff_t off;
+	struct net_device *dev;
+
+	rtnl_lock();
+	if (!*pos)
+		return SEQ_START_TOKEN;
+
+	off = 1;
+	for_each_netdev(net, dev)
+		if (off++ == *pos)
+			return dev;
+	return NULL;
+}
+
+static void *wireless_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+
+	++*pos;
+
+	return v == SEQ_START_TOKEN ?
+		first_net_device(net) : next_net_device(v);
+}
+
+static void wireless_dev_seq_stop(struct seq_file *seq, void *v)
+{
+	rtnl_unlock();
+}
+
 static const struct seq_operations wireless_seq_ops = {
-	.start = dev_seq_start,
-	.next  = dev_seq_next,
-	.stop  = dev_seq_stop,
-	.show  = wireless_seq_show,
+	.start = wireless_dev_seq_start,
+	.next  = wireless_dev_seq_next,
+	.stop  = wireless_dev_seq_stop,
+	.show  = wireless_dev_seq_show,
 };
 
-static int wireless_seq_open(struct inode *inode, struct file *file)
+static int seq_open_wireless(struct inode *inode, struct file *file)
 {
 	return seq_open_net(inode, file, &wireless_seq_ops,
 			    sizeof(struct seq_net_private));
@@ -664,7 +698,7 @@ static int wireless_seq_open(struct inode *inode, struct file *file)
 
 static const struct file_operations wireless_seq_fops = {
 	.owner	 = THIS_MODULE,
-	.open    = wireless_seq_open,
+	.open    = seq_open_wireless,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.release = seq_release_net,
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 96036cf2216..d31ccb48773 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -696,8 +696,9 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
-	int err;
+	struct sk_buff *frag_iter;
 	struct scatterlist sg;
+	int err;
 
 	/* Checksum header. */
 	if (copy > 0) {
@@ -742,28 +743,24 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				err = skb_icv_walk(list, desc, offset-start,
-						   copy, icv_update);
-				if (unlikely(err))
-					return err;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			err = skb_icv_walk(frag_iter, desc, offset-start,
+					   copy, icv_update);
+			if (unlikely(err))
+				return err;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 	return 0;
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index b4a13178fb4..e0009c17d80 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -251,8 +251,7 @@ resume:
 	nf_reset(skb);
 
 	if (decaps) {
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		netif_rx(skb);
 		return 0;
 	} else {
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index c235597ba8d..b9fe13138c0 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -22,7 +22,7 @@ static int xfrm_output2(struct sk_buff *skb);
 
 static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	int nhead = dst->header_len + LL_RESERVED_SPACE(dst->dev)
 		- skb_headroom(skb);
 	int ntail = dst->dev->needed_tailroom - skb_tailroom(skb);
@@ -39,7 +39,7 @@ static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb)
 
 static int xfrm_output_one(struct sk_buff *skb, int err)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct xfrm_state *x = dst->xfrm;
 	struct net *net = xs_net(x);
 
@@ -94,12 +94,13 @@ resume:
 			goto error_nolock;
 		}
 
-		if (!(skb->dst = dst_pop(dst))) {
+		dst = dst_pop(dst);
+		if (!dst) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTERROR);
 			err = -EHOSTUNREACH;
 			goto error_nolock;
 		}
-		dst = skb->dst;
+		skb_dst_set(skb, dst);
 		x = dst->xfrm;
 	} while (x && !(x->outer_mode->flags & XFRM_MODE_FLAG_TUNNEL));
 
@@ -119,16 +120,16 @@ int xfrm_output_resume(struct sk_buff *skb, int err)
 	while (likely((err = xfrm_output_one(skb, err)) == 0)) {
 		nf_reset(skb);
 
-		err = skb->dst->ops->local_out(skb);
+		err = skb_dst(skb)->ops->local_out(skb);
 		if (unlikely(err != 1))
 			goto out;
 
-		if (!skb->dst->xfrm)
+		if (!skb_dst(skb)->xfrm)
 			return dst_output(skb);
 
-		err = nf_hook(skb->dst->ops->family,
+		err = nf_hook(skb_dst(skb)->ops->family,
 			      NF_INET_POST_ROUTING, skb,
-			      NULL, skb->dst->dev, xfrm_output2);
+			      NULL, skb_dst(skb)->dev, xfrm_output2);
 		if (unlikely(err != 1))
 			goto out;
 	}
@@ -179,7 +180,7 @@ static int xfrm_output_gso(struct sk_buff *skb)
 
 int xfrm_output(struct sk_buff *skb)
 {
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	int err;
 
 	if (skb_is_gso(skb))
@@ -202,7 +203,7 @@ int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb)
 	struct xfrm_mode *inner_mode;
 	if (x->sel.family == AF_UNSPEC)
 		inner_mode = xfrm_ip2inner_mode(x,
-				xfrm_af2proto(skb->dst->ops->family));
+				xfrm_af2proto(skb_dst(skb)->ops->family));
 	else
 		inner_mode = x->inner_mode;
 
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 9c068ab3a83..cb81ca35b0d 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2027,6 +2027,8 @@ int __xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 {
 	struct net *net = dev_net(skb->dev);
 	struct flowi fl;
+	struct dst_entry *dst;
+	int res;
 
 	if (xfrm_decode_session(skb, &fl, family) < 0) {
 		/* XXX: we should have something like FWDHDRERROR here. */
@@ -2034,7 +2036,11 @@ int __xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 		return 0;
 	}
 
-	return xfrm_lookup(net, &skb->dst, &fl, NULL, 0) == 0;
+	dst = skb_dst(skb);
+
+	res = xfrm_lookup(net, &dst, &fl, NULL, 0) == 0;
+	skb_dst_set(skb, dst);
+	return res;
 }
 EXPORT_SYMBOL(__xfrm_route_forward);
 
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 095cfc8b9db..0fcd8383877 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -54,8 +54,12 @@ quiet_cmd_remove = REMOVE  $(unwanted)
       cmd_remove = rm -f $(unwanted-file)
 
 quiet_cmd_check = CHECK   $(printdir) ($(words $(all-files)) files)
-      cmd_check = $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH) \
-                  $(addprefix $(install)/, $(all-files));           \
+# Headers list can be pretty long, xargs helps to avoid
+# the "Argument list too long" error.
+      cmd_check = for f in $(all-files); do                          \
+                  echo "$(install)/$${f}"; done                      \
+                  | xargs                                            \
+                  $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
 	          touch $@
 
 PHONY += __headersinst __headerscheck
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index 35bdc68b6e6..4c9523ef9c0 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -69,7 +69,7 @@ FILELINE * docsection;
 #define NOFUNCTION    "-nofunction"
 #define NODOCSECTIONS "-no-doc-sections"
 
-char *srctree;
+static char *srctree, *kernsrctree;
 
 void usage (void)
 {
@@ -77,7 +77,8 @@ void usage (void)
 	fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
 	fprintf(stderr, "doc: frontend when generating kernel documentation\n");
 	fprintf(stderr, "depend: generate list of files referenced within file\n");
-	fprintf(stderr, "Environment variable SRCTREE: absolute path to kernel source tree.\n");
+	fprintf(stderr, "Environment variable SRCTREE: absolute path to sources.\n");
+	fprintf(stderr, "                     KBUILD_SRC: absolute path to kernel source tree.\n");
 }
 
 /*
@@ -96,8 +97,8 @@ void exec_kernel_doc(char **svec)
 			exit(1);
 		case  0:
 			memset(real_filename, 0, sizeof(real_filename));
-			strncat(real_filename, srctree, PATH_MAX);
-			strncat(real_filename, KERNELDOCPATH KERNELDOC,
+			strncat(real_filename, kernsrctree, PATH_MAX);
+			strncat(real_filename, "/" KERNELDOCPATH KERNELDOC,
 					PATH_MAX - strlen(real_filename));
 			execvp(real_filename, svec);
 			fprintf(stderr, "exec ");
@@ -178,6 +179,7 @@ void find_export_symbols(char * filename)
 		char real_filename[PATH_MAX + 1];
 		memset(real_filename, 0, sizeof(real_filename));
 		strncat(real_filename, srctree, PATH_MAX);
+		strncat(real_filename, "/", PATH_MAX - strlen(real_filename));
 		strncat(real_filename, filename,
 				PATH_MAX - strlen(real_filename));
 		sym = add_new_file(filename);
@@ -382,6 +384,9 @@ int main(int argc, char *argv[])
 	srctree = getenv("SRCTREE");
 	if (!srctree)
 		srctree = getcwd(NULL, 0);
+	kernsrctree = getenv("KBUILD_SRC");
+	if (!kernsrctree)
+		kernsrctree = srctree;
 	if (argc != 3) {
 		usage();
 		exit(1);
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index 8912c0f5460..72c15205bb2 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -373,10 +373,11 @@ void print_deps(void)
 void traps(void)
 {
 	static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
+	int *p = (int *)test;
 
-	if (*(int *)test != INT_CONF) {
+	if (*p != INT_CONF) {
 		fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianess? %#x\n",
-			*(int *)test);
+			*p);
 		exit(2);
 	}
 }
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 60d00d1c4ee..66ad375612f 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -14,6 +14,57 @@ cat << EOF
 #include <asm/types.h>
 #include <asm/unistd.h>
 
+/* *at */
+#define __IGNORE_open		/* openat */
+#define __IGNORE_link		/* linkat */
+#define __IGNORE_unlink		/* unlinkat */
+#define __IGNORE_mknod		/* mknodat */
+#define __IGNORE_chmod		/* fchmodat */
+#define __IGNORE_chown		/* fchownat */
+#define __IGNORE_mkdir		/* mkdirat */
+#define __IGNORE_rmdir		/* unlinkat */
+#define __IGNORE_lchown		/* fchownat */
+#define __IGNORE_access		/* faccessat */
+#define __IGNORE_rename		/* renameat */
+#define __IGNORE_readlink	/* readlinkat */
+#define __IGNORE_symlink	/* symlinkat */
+#define __IGNORE_utimes		/* futimesat */
+#if BITS_PER_LONG == 64
+#define __IGNORE_stat		/* fstatat */
+#define __IGNORE_lstat		/* fstatat */
+#else
+#define __IGNORE_stat64		/* fstatat64 */
+#define __IGNORE_lstat64	/* fstatat64 */
+#endif
+
+/* CLOEXEC flag */
+#define __IGNORE_pipe		/* pipe2 */
+#define __IGNORE_dup2		/* dup3 */
+#define __IGNORE_epoll_create	/* epoll_create1 */
+#define __IGNORE_inotify_init	/* inotify_init1 */
+#define __IGNORE_eventfd	/* eventfd2 */
+#define __IGNORE_signalfd	/* signalfd4 */
+
+/* MMU */
+#ifndef CONFIG_MMU
+#define __IGNORE_madvise
+#define __IGNORE_mbind
+#define __IGNORE_mincore
+#define __IGNORE_mlock
+#define __IGNORE_mlockall
+#define __IGNORE_munlock
+#define __IGNORE_munlockall
+#define __IGNORE_mprotect
+#define __IGNORE_msync
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+#define __IGNORE_remap_file_pages
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_swapoff
+#define __IGNORE_swapon
+#endif
+
 /* System calls for 32-bit kernels only */
 #if BITS_PER_LONG == 64
 #define __IGNORE_sendfile64
@@ -27,6 +78,22 @@ cat << EOF
 #define __IGNORE_fstatat64
 #define __IGNORE_fstatfs64
 #define __IGNORE_statfs64
+#define __IGNORE_llseek
+#define __IGNORE_mmap2
+#else
+#define __IGNORE_sendfile
+#define __IGNORE_ftruncate
+#define __IGNORE_truncate
+#define __IGNORE_stat
+#define __IGNORE_lstat
+#define __IGNORE_fstat
+#define __IGNORE_fcntl
+#define __IGNORE_fadvise64
+#define __IGNORE_newfstatat
+#define __IGNORE_fstatfs
+#define __IGNORE_statfs
+#define __IGNORE_lseek
+#define __IGNORE_mmap
 #endif
 
 /* i386-specific or historical system calls */
@@ -44,7 +111,6 @@ cat << EOF
 #define __IGNORE_idle
 #define __IGNORE_modify_ldt
 #define __IGNORE_ugetrlimit
-#define __IGNORE_mmap2
 #define __IGNORE_vm86
 #define __IGNORE_vm86old
 #define __IGNORE_set_thread_area
@@ -55,7 +121,6 @@ cat << EOF
 #define __IGNORE_oldlstat
 #define __IGNORE_oldolduname
 #define __IGNORE_olduname
-#define __IGNORE_umount2
 #define __IGNORE_umount
 #define __IGNORE_waitpid
 #define __IGNORE_stime
@@ -75,9 +140,12 @@ cat << EOF
 #define __IGNORE__llseek
 #define __IGNORE__newselect
 #define __IGNORE_create_module
-#define __IGNORE_delete_module
 #define __IGNORE_query_module
 #define __IGNORE_get_kernel_syms
+#define __IGNORE_sysfs
+#define __IGNORE_uselib
+#define __IGNORE__sysctl
+
 /* ... including the "new" 32-bit uid syscalls */
 #define __IGNORE_lchown32
 #define __IGNORE_getuid32
@@ -99,6 +167,24 @@ cat << EOF
 #define __IGNORE_setfsuid32
 #define __IGNORE_setfsgid32
 
+/* these can be expressed using other calls */
+#define __IGNORE_alarm		/* setitimer */
+#define __IGNORE_creat		/* open */
+#define __IGNORE_fork		/* clone */
+#define __IGNORE_futimesat	/* utimensat */
+#define __IGNORE_getpgrp	/* getpgid */
+#define __IGNORE_getdents	/* getdents64 */
+#define __IGNORE_pause		/* sigsuspend */
+#define __IGNORE_poll		/* ppoll */
+#define __IGNORE_select		/* pselect6 */
+#define __IGNORE_epoll_wait	/* epoll_pwait */
+#define __IGNORE_time		/* gettimeofday */
+#define __IGNORE_uname		/* newuname */
+#define __IGNORE_ustat		/* statfs */
+#define __IGNORE_utime		/* utimes */
+#define __IGNORE_vfork		/* clone */
+#define __IGNORE_wait4		/* waitid */
+
 /* sync_file_range had a stupid ABI. Allow sync_file_range2 instead */
 #ifdef __NR_sync_file_range2
 #define __IGNORE_sync_file_range
diff --git a/scripts/config b/scripts/config
index db6084b78a1..608d7fdb13e 100755
--- a/scripts/config
+++ b/scripts/config
@@ -9,8 +9,10 @@ config options command ...
 commands:
 	--enable|-e option   Enable option
 	--disable|-d option  Disable option
-	--module|-m option      Turn option into a module
-	--state|-s option       Print state of option (n,y,m,undef)
+	--module|-m option   Turn option into a module
+	--set-str option value
+	                     Set option to "value"
+	--state|-s option    Print state of option (n,y,m,undef)
 
 	--enable-after|-E beforeopt option
                              Enable option directly after other option
@@ -26,8 +28,6 @@ options:
 
 config doesn't check the validity of the .config file. This is done at next
  make time.
-The options need to be already in the file before they can be changed,
-but sometimes you can cheat with the --*-after options.
 EOL
 	exit 1
 }
@@ -45,8 +45,18 @@ checkarg() {
 	ARG="`echo $ARG | tr a-z A-Z`"
 }
 
-replace() {
-	sed -i -e "$@" $FN
+set_var() {
+	local name=$1 new=$2 before=$3
+
+	name_re="^($name=|# $name is not set)"
+	before_re="^($before=|# $before is not set)"
+	if test -n "$before" && grep -Eq "$before_re" "$FN"; then
+		sed -ri "/$before_re/a $new" "$FN"
+	elif grep -Eq "$name_re" "$FN"; then
+		sed -ri "s:$name_re.*:$new:" "$FN"
+	else
+		echo "$new" >>"$FN"
+	fi
 }
 
 if [ "$1" = "--file" ]; then
@@ -54,8 +64,7 @@ if [ "$1" = "--file" ]; then
 	if [ "$FN" = "" ] ; then
 		usage
 	fi
-	shift
-	shift
+	shift 2
 else
 	FN=.config
 fi
@@ -68,27 +77,39 @@ while [ "$1" != "" ] ; do
 	CMD="$1"
 	shift
 	case "$CMD" in
-	--enable|-e)
+	--refresh)
+		;;
+	--*-after)
+		checkarg "$1"
+		A=$ARG
+		checkarg "$2"
+		B=$ARG
+		shift 2
+		;;
+	--*)
 		checkarg "$1"
-		replace "s/# CONFIG_$ARG is not set/CONFIG_$ARG=y/"
 		shift
 		;;
+	esac
+	case "$CMD" in
+	--enable|-e)
+		set_var "CONFIG_$ARG" "CONFIG_$ARG=y"
+		;;
 
 	--disable|-d)
-		checkarg "$1"
-		replace "s/CONFIG_$ARG=[my]/# CONFIG_$ARG is not set/"
-		shift
+		set_var "CONFIG_$ARG" "# CONFIG_$ARG is not set"
 		;;
 
 	--module|-m)
-		checkarg "$1"
-		replace "s/CONFIG_$ARG=y/CONFIG_$ARG=m/" \
-			-e "s/# CONFIG_$ARG is not set/CONFIG_$ARG=m/"
+		set_var "CONFIG_$ARG" "CONFIG_$ARG=m"
+		;;
+
+	--set-str)
+		set_var "CONFIG_$ARG" "CONFIG_$ARG=\"$1\""
 		shift
 		;;
 
 	--state|-s)
-		checkarg "$1"
 		if grep -q "# CONFIG_$ARG is not set" $FN ; then
 			echo n
 		else
@@ -101,44 +122,18 @@ while [ "$1" != "" ] ; do
 				echo "$V"
 			fi
 		fi
-		shift
 		;;
 
 	--enable-after|-E)
-		checkarg "$1"
-		A=$ARG
-		checkarg "$2"
-		B=$ARG
-		replace "/CONFIG_$A=[my]/aCONFIG_$B=y" \
-			-e "/# CONFIG_$ARG is not set/a/CONFIG_$ARG=y" \
-			-e "s/# CONFIG_$ARG is not set/CONFIG_$ARG=y/"
-		shift
-		shift
+		set_var "CONFIG_$B" "CONFIG_$B=y" "CONFIG_$A"
 		;;
 
 	--disable-after|-D)
-		checkarg "$1"
-		A=$ARG
-		checkarg "$2"
-		B=$ARG
-		replace "/CONFIG_$A=[my]/a# CONFIG_$B is not set" \
-		-e "/# CONFIG_$ARG is not set/a/# CONFIG_$ARG is not set" \
-		-e "s/CONFIG_$ARG=[my]/# CONFIG_$ARG is not set/"
-		shift
-		shift
+		set_var "CONFIG_$B" "# CONFIG_$B is not set" "CONFIG_$A"
 		;;
 
 	--module-after|-M)
-		checkarg "$1"
-		A=$ARG
-		checkarg "$2"
-		B=$ARG
-		replace "/CONFIG_$A=[my]/aCONFIG_$B=m" \
-			-e "/# CONFIG_$ARG is not set/a/CONFIG_$ARG=m" \
-			-e "s/CONFIG_$ARG=y/CONFIG_$ARG=m/" \
-			-e "s/# CONFIG_$ARG is not set/CONFIG_$ARG=m/"
-		shift
-		shift
+		set_var "CONFIG_$B" "CONFIG_$B=m" "CONFIG_$A"
 		;;
 
 	# undocumented because it ignores --file (fixme)
diff --git a/scripts/gcc-version.sh b/scripts/gcc-version.sh
index cc767b388ba..debecb5561c 100644
--- a/scripts/gcc-version.sh
+++ b/scripts/gcc-version.sh
@@ -18,7 +18,7 @@ compiler="$*"
 
 if [ ${#compiler} -eq 0 ]; then
 	echo "Error: No compiler specified."
-	echo -e "Usage:\n\t$0 <gcc-command>"
+	printf "Usage:\n\t$0 <gcc-command>\n"
 	exit 1
 fi
 
diff --git a/scripts/headers.sh b/scripts/headers.sh
index d33426f866d..0308ecc10d5 100755
--- a/scripts/headers.sh
+++ b/scripts/headers.sh
@@ -15,19 +15,12 @@ do_command()
 	fi
 }
 
-# Do not try this architecture
-drop="generic um ppc sparc64 cris"
-
 archs=$(ls ${srctree}/arch)
 
 for arch in ${archs}; do
 	case ${arch} in
 	um)        # no userspace export
 		;;
-	ppc)       # headers exported by powerpc
-		;;
-	sparc64)   # headers exported by sparc
-		;;
 	cris)      # headers export are known broken
 		;;
 	*)
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
index 56f90a48089..db1dd7a549f 100644
--- a/scripts/headers_check.pl
+++ b/scripts/headers_check.pl
@@ -2,7 +2,7 @@
 #
 # headers_check.pl execute a number of trivial consistency checks
 #
-# Usage: headers_check.pl dir [files...]
+# Usage: headers_check.pl dir arch [files...]
 # dir:   dir to look for included files
 # arch:  architecture
 # files: list of files to check
@@ -37,7 +37,7 @@ foreach my $file (@files) {
 		&check_include();
 		&check_asm_types();
 		&check_sizetypes();
-		&check_prototypes();
+		&check_declarations();
 		# Dropped for now. Too much noise &check_config();
 	}
 	close FH;
@@ -61,16 +61,18 @@ sub check_include
 	}
 }
 
-sub check_prototypes
+sub check_declarations
 {
-	if ($line =~ m/^\s*extern\b/) {
-		printf STDERR "$filename:$lineno: extern's make no sense in userspace\n";
+	if ($line =~m/^\s*extern\b/) {
+		printf STDERR "$filename:$lineno: " .
+		              "userspace cannot call function or variable " .
+		              "defined in the kernel\n";
 	}
 }
 
 sub check_config
 {
-	if ($line =~ m/[^a-zA-Z0-9_]+CONFIG_([a-zA-Z0-9]+)[^a-zA-Z0-9]/) {
+	if ($line =~ m/[^a-zA-Z0-9_]+CONFIG_([a-zA-Z0-9_]+)[^a-zA-Z0-9_]/) {
 		printf STDERR "$filename:$lineno: leaks CONFIG_$1 to userspace where it is not valid\n";
 	}
 }
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 6654cbed965..3cb57895c9e 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -23,6 +23,10 @@
 #include <string.h>
 #include <ctype.h>
 
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+#endif
+
 #define KSYM_NAME_LEN		128
 
 struct sym_entry {
@@ -32,9 +36,23 @@ struct sym_entry {
 	unsigned char *sym;
 };
 
+struct text_range {
+	const char *stext, *etext;
+	unsigned long long start, end;
+};
+
+static unsigned long long _text;
+static struct text_range text_ranges[] = {
+	{ "_stext",     "_etext"     },
+	{ "_sinittext", "_einittext" },
+	{ "_stext_l1",  "_etext_l1"  },	/* Blackfin on-chip L1 inst SRAM */
+	{ "_stext_l2",  "_etext_l2"  },	/* Blackfin on-chip L2 SRAM */
+};
+#define text_range_text     (&text_ranges[0])
+#define text_range_inittext (&text_ranges[1])
+
 static struct sym_entry *table;
 static unsigned int table_size, table_cnt;
-static unsigned long long _text, _stext, _etext, _sinittext, _einittext;
 static int all_symbols = 0;
 static char symbol_prefix_char = '\0';
 
@@ -61,6 +79,26 @@ static inline int is_arm_mapping_symbol(const char *str)
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
+static int read_symbol_tr(const char *sym, unsigned long long addr)
+{
+	size_t i;
+	struct text_range *tr;
+
+	for (i = 0; i < ARRAY_SIZE(text_ranges); ++i) {
+		tr = &text_ranges[i];
+
+		if (strcmp(sym, tr->stext) == 0) {
+			tr->start = addr;
+			return 0;
+		} else if (strcmp(sym, tr->etext) == 0) {
+			tr->end = addr;
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
 static int read_symbol(FILE *in, struct sym_entry *s)
 {
 	char str[500];
@@ -84,14 +122,8 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	/* Ignore most absolute/undefined (?) symbols. */
 	if (strcmp(sym, "_text") == 0)
 		_text = s->addr;
-	else if (strcmp(sym, "_stext") == 0)
-		_stext = s->addr;
-	else if (strcmp(sym, "_etext") == 0)
-		_etext = s->addr;
-	else if (strcmp(sym, "_sinittext") == 0)
-		_sinittext = s->addr;
-	else if (strcmp(sym, "_einittext") == 0)
-		_einittext = s->addr;
+	else if (read_symbol_tr(sym, s->addr) == 0)
+		/* nothing to do */;
 	else if (toupper(stype) == 'A')
 	{
 		/* Keep these useful absolute symbols */
@@ -127,6 +159,21 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	return 0;
 }
 
+static int symbol_valid_tr(struct sym_entry *s)
+{
+	size_t i;
+	struct text_range *tr;
+
+	for (i = 0; i < ARRAY_SIZE(text_ranges); ++i) {
+		tr = &text_ranges[i];
+
+		if (s->addr >= tr->start && s->addr < tr->end)
+			return 0;
+	}
+
+	return 1;
+}
+
 static int symbol_valid(struct sym_entry *s)
 {
 	/* Symbols which vary between passes.  Passes 1 and 2 must have
@@ -156,8 +203,7 @@ static int symbol_valid(struct sym_entry *s)
 	/* if --all-symbols is not specified, then symbols outside the text
 	 * and inittext sections are discarded */
 	if (!all_symbols) {
-		if ((s->addr < _stext || s->addr > _etext)
-		    && (s->addr < _sinittext || s->addr > _einittext))
+		if (symbol_valid_tr(s) == 0)
 			return 0;
 		/* Corner case.  Discard any symbols with the same value as
 		 * _etext _einittext; they can move between pass 1 and 2 when
@@ -165,10 +211,10 @@ static int symbol_valid(struct sym_entry *s)
 		 * they may get dropped in pass 2, which breaks the kallsyms
 		 * rules.
 		 */
-		if ((s->addr == _etext &&
-				strcmp((char *)s->sym + offset, "_etext")) ||
-		    (s->addr == _einittext &&
-				strcmp((char *)s->sym + offset, "_einittext")))
+		if ((s->addr == text_range_text->end &&
+				strcmp((char *)s->sym + offset, text_range_text->etext)) ||
+		    (s->addr == text_range_inittext->end &&
+				strcmp((char *)s->sym + offset, text_range_inittext->etext)))
 			return 0;
 	}
 
diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
index b49584c932c..6a36a76e660 100644
--- a/scripts/kconfig/.gitignore
+++ b/scripts/kconfig/.gitignore
@@ -8,6 +8,9 @@ lex.*.c
 zconf.hash.c
 *.moc
 lkc_defs.h
+gconf.glade.h
+*.pot
+*.mo
 
 #
 # configuration programs
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index fa8c2dd9c98..5ddf8becd7a 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -83,7 +83,7 @@ help:
 	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
 	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
 	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
-	@echo  '  silentoldconfig - Same as oldconfig, but quietly'
+	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  defconfig	  - New config with default answer to all options'
 	@echo  '  allmodconfig	  - New config selecting modules when possible'
@@ -104,7 +104,7 @@ HOST_EXTRACFLAGS += -DLOCALE
 # ===========================================================================
 # Shared Makefile for the various kconfig executables:
 # conf:	  Used for defconfig, oldconfig and related targets
-# mconf:  Used for the mconfig target.
+# mconf:  Used for the menuconfig target
 #         Utilizes the lxdialog package
 # qconf:  Used for the xconfig target
 #         Based on QT which needs to be installed to compile it
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index d190092c3b6..3baaaecd6b1 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -498,14 +498,15 @@ int main(int ac, char **av)
 	conf_parse(name);
 	//zconfdump(stdout);
 	if (sync_kconfig) {
-		if (stat(".config", &tmpstat)) {
+		name = conf_get_configname();
+		if (stat(name, &tmpstat)) {
 			fprintf(stderr, _("***\n"
 				"*** You have not yet configured your kernel!\n"
-				"*** (missing kernel .config file)\n"
+				"*** (missing kernel config file \"%s\")\n"
 				"***\n"
 				"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
 				"*** \"make menuconfig\" or \"make xconfig\").\n"
-				"***\n"));
+				"***\n"), name);
 			exit(1);
 		}
 	}
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 273d73888f9..a04da3459f0 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -41,6 +41,13 @@ const char *conf_get_configname(void)
 	return name ? name : ".config";
 }
 
+const char *conf_get_autoconfig_name(void)
+{
+	char *name = getenv("KCONFIG_AUTOCONFIG");
+
+	return name ? name : "include/config/auto.conf";
+}
+
 static char *conf_expand_value(const char *in)
 {
 	struct symbol *sym;
@@ -555,15 +562,14 @@ int conf_write(const char *name)
 
 int conf_split_config(void)
 {
-	char *name, path[128];
+	const char *name;
+	char path[128];
 	char *s, *d, c;
 	struct symbol *sym;
 	struct stat sb;
 	int res, i, fd;
 
-	name = getenv("KCONFIG_AUTOCONFIG");
-	if (!name)
-		name = "include/config/auto.conf";
+	name = conf_get_autoconfig_name();
 	conf_read_simple(name, S_DEF_AUTO);
 
 	if (chdir("include/config"))
@@ -670,7 +676,7 @@ int conf_write_autoconf(void)
 {
 	struct symbol *sym;
 	const char *str;
-	char *name;
+	const char *name;
 	FILE *out, *out_h;
 	time_t now;
 	int i, l;
@@ -773,9 +779,7 @@ int conf_write_autoconf(void)
 		name = "include/linux/autoconf.h";
 	if (rename(".tmpconfig.h", name))
 		return 1;
-	name = getenv("KCONFIG_AUTOCONFIG");
-	if (!name)
-		name = "include/config/auto.conf";
+	name = conf_get_autoconfig_name();
 	/*
 	 * This must be the last step, kbuild has a dependency on auto.conf
 	 * and this marks the successful completion of the previous steps.
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 4a9af6f7886..f379b0bf8c9 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -74,6 +74,7 @@ char *zconf_curname(void);
 
 /* confdata.c */
 const char *conf_get_configname(void);
+const char *conf_get_autoconfig_name(void);
 char *conf_get_default_confname(void);
 void sym_set_change_count(int count);
 void sym_add_change_count(int count);
diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c
index b2a878c936d..bcc6f19c3a3 100644
--- a/scripts/kconfig/lxdialog/checklist.c
+++ b/scripts/kconfig/lxdialog/checklist.c
@@ -41,7 +41,8 @@ static void print_item(WINDOW * win, int choice, int selected)
 	wmove(win, choice, check_x);
 	wattrset(win, selected ? dlg.check_selected.atr
 		 : dlg.check.atr);
-	wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' ');
+	if (!item_is_tag(':'))
+		wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' ');
 
 	wattrset(win, selected ? dlg.tag_selected.atr : dlg.tag.atr);
 	mvwaddch(win, choice, item_x, item_str()[0]);
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 6841e95c098..3bcacb4bfd3 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -732,7 +732,12 @@ static void conf_choice(struct menu *menu)
 		for (child = menu->list; child; child = child->next) {
 			if (!menu_is_visible(child))
 				continue;
-			item_make("%s", _(menu_get_prompt(child)));
+			if (child->sym)
+				item_make("%s", _(menu_get_prompt(child)));
+			else {
+				item_make("*** %s ***", _(menu_get_prompt(child)));
+				item_set_tag(':');
+			}
 			item_set_data(child);
 			if (child->sym == active)
 				item_set_selected(1);
@@ -748,6 +753,9 @@ static void conf_choice(struct menu *menu)
 		case 0:
 			if (selected) {
 				child = item_data();
+				if (!child->sym)
+					break;
+
 				sym_set_tristate_value(child->sym, yes);
 			}
 			return;
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 5d0fd38b089..ce7d508c752 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -5,6 +5,7 @@
 
 #include <qapplication.h>
 #include <qmainwindow.h>
+#include <qdesktopwidget.h>
 #include <qtoolbar.h>
 #include <qlayout.h>
 #include <qvbox.h>
@@ -297,10 +298,10 @@ void ConfigLineEdit::show(ConfigItem* i)
 void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
 {
 	switch (e->key()) {
-	case Key_Escape:
+	case Qt::Key_Escape:
 		break;
-	case Key_Return:
-	case Key_Enter:
+	case Qt::Key_Return:
+	case Qt::Key_Enter:
 		sym_set_string_value(item->menu->sym, text().latin1());
 		parent()->updateList(item);
 		break;
@@ -639,7 +640,7 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
 	struct menu *menu;
 	enum prop_type type;
 
-	if (ev->key() == Key_Escape && mode != fullMode && mode != listMode) {
+	if (ev->key() == Qt::Key_Escape && mode != fullMode && mode != listMode) {
 		emit parentSelected();
 		ev->accept();
 		return;
@@ -652,8 +653,8 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
 	item = (ConfigItem*)i;
 
 	switch (ev->key()) {
-	case Key_Return:
-	case Key_Enter:
+	case Qt::Key_Return:
+	case Qt::Key_Enter:
 		if (item->goParent) {
 			emit parentSelected();
 			break;
@@ -667,16 +668,16 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
 			emit menuSelected(menu);
 			break;
 		}
-	case Key_Space:
+	case Qt::Key_Space:
 		changeValue(item);
 		break;
-	case Key_N:
+	case Qt::Key_N:
 		setValue(item, no);
 		break;
-	case Key_M:
+	case Qt::Key_M:
 		setValue(item, mod);
 		break;
-	case Key_Y:
+	case Qt::Key_Y:
 		setValue(item, yes);
 		break;
 	default:
@@ -920,7 +921,7 @@ void ConfigView::updateListAll(void)
 }
 
 ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
-	: Parent(parent, name), menu(0), sym(0)
+	: Parent(parent, name), sym(0), menu(0)
 {
 	if (name) {
 		configSettings->beginGroup(name);
@@ -1199,7 +1200,7 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
 	layout1->addLayout(layout2);
 
 	split = new QSplitter(this);
-	split->setOrientation(QSplitter::Vertical);
+	split->setOrientation(Qt::Vertical);
 	list = new ConfigView(split, name);
 	list->list->mode = listMode;
 	info = new ConfigInfoView(split, name);
@@ -1275,7 +1276,7 @@ ConfigMainWindow::ConfigMainWindow(void)
 	int x, y, width, height;
 	char title[256];
 
-	QWidget *d = configApp->desktop();
+	QDesktopWidget *d = configApp->desktop();
 	snprintf(title, sizeof(title), _("Linux Kernel v%s Configuration"),
 		getenv("KERNELVERSION"));
 	setCaption(title);
@@ -1290,14 +1291,14 @@ ConfigMainWindow::ConfigMainWindow(void)
 		move(x, y);
 
 	split1 = new QSplitter(this);
-	split1->setOrientation(QSplitter::Horizontal);
+	split1->setOrientation(Qt::Horizontal);
 	setCentralWidget(split1);
 
 	menuView = new ConfigView(split1, "menu");
 	menuList = menuView->list;
 
 	split2 = new QSplitter(split1);
-	split2->setOrientation(QSplitter::Vertical);
+	split2->setOrientation(Qt::Vertical);
 
 	// create config tree
 	configView = new ConfigView(split2, "config");
@@ -1315,18 +1316,18 @@ ConfigMainWindow::ConfigMainWindow(void)
 	backAction = new QAction("Back", QPixmap(xpm_back), _("Back"), 0, this);
 	  connect(backAction, SIGNAL(activated()), SLOT(goBack()));
 	  backAction->setEnabled(FALSE);
-	QAction *quitAction = new QAction("Quit", _("&Quit"), CTRL+Key_Q, this);
+	QAction *quitAction = new QAction("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this);
 	  connect(quitAction, SIGNAL(activated()), SLOT(close()));
-	QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), CTRL+Key_L, this);
+	QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this);
 	  connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
-	saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), CTRL+Key_S, this);
+	saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this);
 	  connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
 	conf_set_changed_callback(conf_changed);
 	// Set saveAction's initial state
 	conf_changed();
 	QAction *saveAsAction = new QAction("Save As...", _("Save &As..."), 0, this);
 	  connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
-	QAction *searchAction = new QAction("Find", _("&Find"), CTRL+Key_F, this);
+	QAction *searchAction = new QAction("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this);
 	  connect(searchAction, SIGNAL(activated()), SLOT(searchConfig()));
 	QAction *singleViewAction = new QAction("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this);
 	  connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView()));
@@ -1447,7 +1448,7 @@ ConfigMainWindow::ConfigMainWindow(void)
 
 void ConfigMainWindow::loadConfig(void)
 {
-	QString s = QFileDialog::getOpenFileName(".config", NULL, this);
+	QString s = QFileDialog::getOpenFileName(conf_get_configname(), NULL, this);
 	if (s.isNull())
 		return;
 	if (conf_read(QFile::encodeName(s)))
@@ -1463,7 +1464,7 @@ void ConfigMainWindow::saveConfig(void)
 
 void ConfigMainWindow::saveConfigAs(void)
 {
-	QString s = QFileDialog::getSaveFileName(".config", NULL, this);
+	QString s = QFileDialog::getSaveFileName(conf_get_configname(), NULL, this);
 	if (s.isNull())
 		return;
 	if (conf_write(QFile::encodeName(s)))
@@ -1524,6 +1525,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
 	case fullMode:
 		list = configList;
 		break;
+	default:
+		break;
 	}
 
 	if (list) {
@@ -1673,6 +1676,9 @@ void ConfigMainWindow::saveSettings(void)
 	case fullMode :
 		entry = "full";
 		break;
+
+	default:
+		break;
 	}
 	configSettings->writeEntry("/listMode", entry);
 
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index 3cc9f936903..b6b2a46af14 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -46,8 +46,8 @@ int file_write_dep(const char *name)
 		else
 			fprintf(out, "\t%s\n", file->name);
 	}
-	fprintf(out, "\ninclude/config/auto.conf: \\\n"
-		     "\t$(deps_config)\n\n");
+	fprintf(out, "\n%s: \\\n"
+		     "\t$(deps_config)\n\n", conf_get_autoconfig_name());
 
 	expr_list_for_each_sym(sym_env_list, e, sym) {
 		struct property *prop;
@@ -61,7 +61,7 @@ int file_write_dep(const char *name)
 		if (!value)
 			value = "";
 		fprintf(out, "ifneq \"$(%s)\" \"%s\"\n", env_sym->name, value);
-		fprintf(out, "include/config/auto.conf: FORCE\n");
+		fprintf(out, "%s: FORCE\n", conf_get_autoconfig_name());
 		fprintf(out, "endif\n");
 	}
 
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index acd8c4a8e3e..a193fa3f527 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -5,7 +5,7 @@ use strict;
 ## Copyright (c) 1998 Michael Zucchi, All Rights Reserved        ##
 ## Copyright (C) 2000, 1  Tim Waugh <twaugh@redhat.com>          ##
 ## Copyright (C) 2001  Simon Huggins                             ##
-## Copyright (C) 2005-2008  Randy Dunlap                         ##
+## Copyright (C) 2005-2009  Randy Dunlap                         ##
 ## 								 ##
 ## #define enhancements by Armin Kuster <akuster@mvista.com>	 ##
 ## Copyright (c) 2000 MontaVista Software, Inc.			 ##
@@ -85,7 +85,7 @@ use strict;
 #
 # /**
 #  * my_function
-#  **/
+#  */
 #
 # If the Description: header tag is omitted, then there must be a blank line
 # after the last parameter specification.
@@ -105,7 +105,7 @@ use strict;
 #  */
 # etc.
 #
-# Beside functions you can also write documentation for structs, unions,
+# Besides functions you can also write documentation for structs, unions,
 # enums and typedefs. Instead of the function name you must write the name
 # of the declaration;  the struct/union/enum/typedef must always precede
 # the name. Nesting of declarations is not supported.
@@ -223,7 +223,7 @@ sub usage {
 }
 
 # read arguments
-if ($#ARGV==-1) {
+if ($#ARGV == -1) {
     usage();
 }
 
@@ -240,12 +240,12 @@ my $man_date = ('January', 'February', 'March', 'April', 'May', 'June',
   " " . ((localtime)[5]+1900);
 
 # Essentially these are globals
-# They probably want to be tidied up made more localised or summat.
-# CAVEAT EMPTOR!  Some of the others I localised may not want to be which
+# They probably want to be tidied up, made more localised or something.
+# CAVEAT EMPTOR!  Some of the others I localised may not want to be, which
 # could cause "use of undefined value" or other bugs.
-my ($function, %function_table,%parametertypes,$declaration_purpose);
-my ($type,$declaration_name,$return_type);
-my ($newsection,$newcontents,$prototype,$filelist, $brcount, %source_map);
+my ($function, %function_table, %parametertypes, $declaration_purpose);
+my ($type, $declaration_name, $return_type);
+my ($newsection, $newcontents, $prototype, $filelist, $brcount, %source_map);
 
 if (defined($ENV{'KBUILD_VERBOSE'})) {
 	$verbose = "$ENV{'KBUILD_VERBOSE'}";
@@ -279,10 +279,10 @@ my $doc_special = "\@\%\$\&";
 my $doc_start = '^/\*\*\s*$'; # Allow whitespace at end of comment start.
 my $doc_end = '\*/';
 my $doc_com = '\s*\*\s*';
-my $doc_decl = $doc_com.'(\w+)';
-my $doc_sect = $doc_com.'(['.$doc_special.']?[\w\s]+):(.*)';
-my $doc_content = $doc_com.'(.*)';
-my $doc_block = $doc_com.'DOC:\s*(.*)?';
+my $doc_decl = $doc_com . '(\w+)';
+my $doc_sect = $doc_com . '([' . $doc_special . ']?[\w\s]+):(.*)';
+my $doc_content = $doc_com . '(.*)';
+my $doc_block = $doc_com . 'DOC:\s*(.*)?';
 
 my %constants;
 my %parameterdescs;
@@ -485,12 +485,12 @@ sub output_enum_html(%) {
     my %args = %{$_[0]};
     my ($parameter);
     my $count;
-    print "<h2>enum ".$args{'enum'}."</h2>\n";
+    print "<h2>enum " . $args{'enum'} . "</h2>\n";
 
-    print "<b>enum ".$args{'enum'}."</b> {<br>\n";
+    print "<b>enum " . $args{'enum'} . "</b> {<br>\n";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
-	print " <b>".$parameter."</b>";
+	print " <b>" . $parameter . "</b>";
 	if ($count != $#{$args{'parameterlist'}}) {
 	    $count++;
 	    print ",\n";
@@ -502,7 +502,7 @@ sub output_enum_html(%) {
     print "<h3>Constants</h3>\n";
     print "<dl>\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
-	print "<dt><b>".$parameter."</b>\n";
+	print "<dt><b>" . $parameter . "</b>\n";
 	print "<dd>";
 	output_highlight($args{'parameterdescs'}{$parameter});
     }
@@ -516,9 +516,9 @@ sub output_typedef_html(%) {
     my %args = %{$_[0]};
     my ($parameter);
     my $count;
-    print "<h2>typedef ".$args{'typedef'}."</h2>\n";
+    print "<h2>typedef " . $args{'typedef'} . "</h2>\n";
 
-    print "<b>typedef ".$args{'typedef'}."</b>\n";
+    print "<b>typedef " . $args{'typedef'} . "</b>\n";
     output_section_html(@_);
     print "<hr>\n";
 }
@@ -528,8 +528,8 @@ sub output_struct_html(%) {
     my %args = %{$_[0]};
     my ($parameter);
 
-    print "<h2>".$args{'type'}." ".$args{'struct'}. " - " .$args{'purpose'}."</h2>\n";
-    print "<b>".$args{'type'}." ".$args{'struct'}."</b> {<br>\n";
+    print "<h2>" . $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "</h2>\n";
+    print "<b>" . $args{'type'} . " " . $args{'struct'} . "</b> {<br>\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
 		print "$parameter<br>\n";
@@ -561,7 +561,7 @@ sub output_struct_html(%) {
 	$parameter_name =~ s/\[.*//;
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
-	print "<dt><b>".$parameter."</b>\n";
+	print "<dt><b>" . $parameter . "</b>\n";
 	print "<dd>";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
@@ -576,9 +576,9 @@ sub output_function_html(%) {
     my ($parameter, $section);
     my $count;
 
-    print "<h2>" .$args{'function'}." - ".$args{'purpose'}."</h2>\n";
-    print "<i>".$args{'functiontype'}."</i>\n";
-    print "<b>".$args{'function'}."</b>\n";
+    print "<h2>" . $args{'function'} . " - " . $args{'purpose'} . "</h2>\n";
+    print "<i>" . $args{'functiontype'} . "</i>\n";
+    print "<b>" . $args{'function'} . "</b>\n";
     print "(";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
@@ -587,7 +587,7 @@ sub output_function_html(%) {
 	    # pointer-to-function
 	    print "<i>$1</i><b>$parameter</b>) <i>($2)</i>";
 	} else {
-	    print "<i>".$type."</i> <b>".$parameter."</b>";
+	    print "<i>" . $type . "</i> <b>" . $parameter . "</b>";
 	}
 	if ($count != $#{$args{'parameterlist'}}) {
 	    $count++;
@@ -603,7 +603,7 @@ sub output_function_html(%) {
 	$parameter_name =~ s/\[.*//;
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
-	print "<dt><b>".$parameter."</b>\n";
+	print "<dt><b>" . $parameter . "</b>\n";
 	print "<dd>";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
@@ -657,7 +657,7 @@ sub output_function_xml(%) {
     my $count;
     my $id;
 
-    $id = "API-".$args{'function'};
+    $id = "API-" . $args{'function'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -667,12 +667,12 @@ sub output_function_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>".$args{'function'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>" . $args{'function'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>".$args{'function'}."</refname>\n";
+    print " <refname>" . $args{'function'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -682,8 +682,8 @@ sub output_function_xml(%) {
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
     print "  <funcsynopsis><funcprototype>\n";
-    print "   <funcdef>".$args{'functiontype'}." ";
-    print "<function>".$args{'function'}." </function></funcdef>\n";
+    print "   <funcdef>" . $args{'functiontype'} . " ";
+    print "<function>" . $args{'function'} . " </function></funcdef>\n";
 
     $count = 0;
     if ($#{$args{'parameterlist'}} >= 0) {
@@ -694,7 +694,7 @@ sub output_function_xml(%) {
 		print "   <paramdef>$1<parameter>$parameter</parameter>)\n";
 		print "     <funcparams>$2</funcparams></paramdef>\n";
 	    } else {
-		print "   <paramdef>".$type;
+		print "   <paramdef>" . $type;
 		print " <parameter>$parameter</parameter></paramdef>\n";
 	    }
 	}
@@ -734,7 +734,7 @@ sub output_struct_xml(%) {
     my ($parameter, $section);
     my $id;
 
-    $id = "API-struct-".$args{'struct'};
+    $id = "API-struct-" . $args{'struct'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -744,12 +744,12 @@ sub output_struct_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>".$args{'type'}." ".$args{'struct'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>" . $args{'type'} . " " . $args{'struct'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>".$args{'type'}." ".$args{'struct'}."</refname>\n";
+    print " <refname>" . $args{'type'} . " " . $args{'struct'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -759,7 +759,7 @@ sub output_struct_xml(%) {
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
     print "  <programlisting>\n";
-    print $args{'type'}." ".$args{'struct'}." {\n";
+    print $args{'type'} . " " . $args{'struct'} . " {\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
 	    print "$parameter\n";
@@ -779,7 +779,7 @@ sub output_struct_xml(%) {
 	    # bitfield
 	    print "  $1 $parameter$2;\n";
 	} else {
-	    print "  ".$type." ".$parameter.";\n";
+	    print "  " . $type . " " . $parameter . ";\n";
 	}
     }
     print "};";
@@ -824,7 +824,7 @@ sub output_enum_xml(%) {
     my $count;
     my $id;
 
-    $id = "API-enum-".$args{'enum'};
+    $id = "API-enum-" . $args{'enum'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -834,12 +834,12 @@ sub output_enum_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>enum ".$args{'enum'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>enum " . $args{'enum'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>enum ".$args{'enum'}."</refname>\n";
+    print " <refname>enum " . $args{'enum'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -849,7 +849,7 @@ sub output_enum_xml(%) {
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
     print "  <programlisting>\n";
-    print "enum ".$args{'enum'}." {\n";
+    print "enum " . $args{'enum'} . " {\n";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
 	print "  $parameter";
@@ -891,7 +891,7 @@ sub output_typedef_xml(%) {
     my ($parameter, $section);
     my $id;
 
-    $id = "API-typedef-".$args{'typedef'};
+    $id = "API-typedef-" . $args{'typedef'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -901,11 +901,11 @@ sub output_typedef_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>typedef ".$args{'typedef'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>typedef " . $args{'typedef'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>typedef ".$args{'typedef'}."</refname>\n";
+    print " <refname>typedef " . $args{'typedef'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -914,7 +914,7 @@ sub output_typedef_xml(%) {
 
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
-    print "  <synopsis>typedef ".$args{'typedef'}.";</synopsis>\n";
+    print "  <synopsis>typedef " . $args{'typedef'} . ";</synopsis>\n";
     print "</refsynopsisdiv>\n";
 
     output_section_xml(@_);
@@ -963,15 +963,15 @@ sub output_function_gnome {
     my $count;
     my $id;
 
-    $id = $args{'module'}."-".$args{'function'};
+    $id = $args{'module'} . "-" . $args{'function'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<sect2>\n";
-    print " <title id=\"$id\">".$args{'function'}."</title>\n";
+    print " <title id=\"$id\">" . $args{'function'} . "</title>\n";
 
     print "  <funcsynopsis>\n";
-    print "   <funcdef>".$args{'functiontype'}." ";
-    print "<function>".$args{'function'}." ";
+    print "   <funcdef>" . $args{'functiontype'} . " ";
+    print "<function>" . $args{'function'} . " ";
     print "</function></funcdef>\n";
 
     $count = 0;
@@ -983,7 +983,7 @@ sub output_function_gnome {
 		print "   <paramdef>$1 <parameter>$parameter</parameter>)\n";
 		print "     <funcparams>$2</funcparams></paramdef>\n";
 	    } else {
-		print "   <paramdef>".$type;
+		print "   <paramdef>" . $type;
 		print " <parameter>$parameter</parameter></paramdef>\n";
 	    }
 	}
@@ -1043,13 +1043,13 @@ sub output_function_man(%) {
     print ".TH \"$args{'function'}\" 9 \"$args{'function'}\" \"$man_date\" \"Kernel Hacker's Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print $args{'function'}." \\- ".$args{'purpose'}."\n";
+    print $args{'function'} . " \\- " . $args{'purpose'} . "\n";
 
     print ".SH SYNOPSIS\n";
     if ($args{'functiontype'} ne "") {
-	print ".B \"".$args{'functiontype'}."\" ".$args{'function'}."\n";
+	print ".B \"" . $args{'functiontype'} . "\" " . $args{'function'} . "\n";
     } else {
-	print ".B \"".$args{'function'}."\n";
+	print ".B \"" . $args{'function'} . "\n";
     }
     $count = 0;
     my $parenth = "(";
@@ -1061,10 +1061,10 @@ sub output_function_man(%) {
 	$type = $args{'parametertypes'}{$parameter};
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print ".BI \"".$parenth.$1."\" ".$parameter." \") (".$2.")".$post."\"\n";
+	    print ".BI \"" . $parenth . $1 . "\" " . $parameter . " \") (" . $2 . ")" . $post . "\"\n";
 	} else {
 	    $type =~ s/([^\*])$/$1 /;
-	    print ".BI \"".$parenth.$type."\" ".$parameter." \"".$post."\"\n";
+	    print ".BI \"" . $parenth . $type . "\" " . $parameter . " \"" . $post . "\"\n";
 	}
 	$count++;
 	$parenth = "";
@@ -1075,7 +1075,7 @@ sub output_function_man(%) {
 	my $parameter_name = $parameter;
 	$parameter_name =~ s/\[.*//;
 
-	print ".IP \"".$parameter."\" 12\n";
+	print ".IP \"" . $parameter . "\" 12\n";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
     foreach $section (@{$args{'sectionlist'}}) {
@@ -1094,10 +1094,10 @@ sub output_enum_man(%) {
     print ".TH \"$args{'module'}\" 9 \"enum $args{'enum'}\" \"$man_date\" \"API Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print "enum ".$args{'enum'}." \\- ".$args{'purpose'}."\n";
+    print "enum " . $args{'enum'} . " \\- " . $args{'purpose'} . "\n";
 
     print ".SH SYNOPSIS\n";
-    print "enum ".$args{'enum'}." {\n";
+    print "enum " . $args{'enum'} . " {\n";
     $count = 0;
     foreach my $parameter (@{$args{'parameterlist'}}) {
 	print ".br\n.BI \"    $parameter\"\n";
@@ -1116,7 +1116,7 @@ sub output_enum_man(%) {
 	my $parameter_name = $parameter;
 	$parameter_name =~ s/\[.*//;
 
-	print ".IP \"".$parameter."\" 12\n";
+	print ".IP \"" . $parameter . "\" 12\n";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
     foreach $section (@{$args{'sectionlist'}}) {
@@ -1131,13 +1131,13 @@ sub output_struct_man(%) {
     my %args = %{$_[0]};
     my ($parameter, $section);
 
-    print ".TH \"$args{'module'}\" 9 \"".$args{'type'}." ".$args{'struct'}."\" \"$man_date\" \"API Manual\" LINUX\n";
+    print ".TH \"$args{'module'}\" 9 \"" . $args{'type'} . " " . $args{'struct'} . "\" \"$man_date\" \"API Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print $args{'type'}." ".$args{'struct'}." \\- ".$args{'purpose'}."\n";
+    print $args{'type'} . " " . $args{'struct'} . " \\- " . $args{'purpose'} . "\n";
 
     print ".SH SYNOPSIS\n";
-    print $args{'type'}." ".$args{'struct'}." {\n.br\n";
+    print $args{'type'} . " " . $args{'struct'} . " {\n.br\n";
 
     foreach my $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
@@ -1151,13 +1151,13 @@ sub output_struct_man(%) {
 	$type = $args{'parametertypes'}{$parameter};
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print ".BI \"    ".$1."\" ".$parameter." \") (".$2.")"."\"\n;\n";
+	    print ".BI \"    " . $1 . "\" " . $parameter . " \") (" . $2 . ")" . "\"\n;\n";
 	} elsif ($type =~ m/^(.*?)\s*(:.*)/) {
 	    # bitfield
-	    print ".BI \"    ".$1."\ \" ".$parameter.$2." \""."\"\n;\n";
+	    print ".BI \"    " . $1 . "\ \" " . $parameter . $2 . " \"" . "\"\n;\n";
 	} else {
 	    $type =~ s/([^\*])$/$1 /;
-	    print ".BI \"    ".$type."\" ".$parameter." \""."\"\n;\n";
+	    print ".BI \"    " . $type . "\" " . $parameter . " \"" . "\"\n;\n";
 	}
 	print "\n.br\n";
     }
@@ -1171,7 +1171,7 @@ sub output_struct_man(%) {
 	$parameter_name =~ s/\[.*//;
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
-	print ".IP \"".$parameter."\" 12\n";
+	print ".IP \"" . $parameter . "\" 12\n";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
     foreach $section (@{$args{'sectionlist'}}) {
@@ -1189,7 +1189,7 @@ sub output_typedef_man(%) {
     print ".TH \"$args{'module'}\" 9 \"$args{'typedef'}\" \"$man_date\" \"API Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print "typedef ".$args{'typedef'}." \\- ".$args{'purpose'}."\n";
+    print "typedef " . $args{'typedef'} . " \\- " . $args{'purpose'} . "\n";
 
     foreach $section (@{$args{'sectionlist'}}) {
 	print ".SH \"$section\"\n";
@@ -1218,13 +1218,13 @@ sub output_function_text(%) {
     my $start;
 
     print "Name:\n\n";
-    print $args{'function'}." - ".$args{'purpose'}."\n";
+    print $args{'function'} . " - " . $args{'purpose'} . "\n";
 
     print "\nSynopsis:\n\n";
     if ($args{'functiontype'} ne "") {
-	$start = $args{'functiontype'}." ".$args{'function'}." (";
+	$start = $args{'functiontype'} . " " . $args{'function'} . " (";
     } else {
-	$start = $args{'function'}." (";
+	$start = $args{'function'} . " (";
     }
     print $start;
 
@@ -1233,9 +1233,9 @@ sub output_function_text(%) {
 	$type = $args{'parametertypes'}{$parameter};
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print $1.$parameter.") (".$2;
+	    print $1 . $parameter . ") (" . $2;
 	} else {
-	    print $type." ".$parameter;
+	    print $type . " " . $parameter;
 	}
 	if ($count != $#{$args{'parameterlist'}}) {
 	    $count++;
@@ -1251,7 +1251,7 @@ sub output_function_text(%) {
 	my $parameter_name = $parameter;
 	$parameter_name =~ s/\[.*//;
 
-	print $parameter."\n\t".$args{'parameterdescs'}{$parameter_name}."\n";
+	print $parameter . "\n\t" . $args{'parameterdescs'}{$parameter_name} . "\n";
     }
     output_section_text(@_);
 }
@@ -1276,8 +1276,8 @@ sub output_enum_text(%) {
     my $count;
     print "Enum:\n\n";
 
-    print "enum ".$args{'enum'}." - ".$args{'purpose'}."\n\n";
-    print "enum ".$args{'enum'}." {\n";
+    print "enum " . $args{'enum'} . " - " . $args{'purpose'} . "\n\n";
+    print "enum " . $args{'enum'} . " {\n";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
 	print "\t$parameter";
@@ -1292,7 +1292,7 @@ sub output_enum_text(%) {
     print "Constants:\n\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	print "$parameter\n\t";
-	print $args{'parameterdescs'}{$parameter}."\n";
+	print $args{'parameterdescs'}{$parameter} . "\n";
     }
 
     output_section_text(@_);
@@ -1305,7 +1305,7 @@ sub output_typedef_text(%) {
     my $count;
     print "Typedef:\n\n";
 
-    print "typedef ".$args{'typedef'}." - ".$args{'purpose'}."\n";
+    print "typedef " . $args{'typedef'} . " - " . $args{'purpose'} . "\n";
     output_section_text(@_);
 }
 
@@ -1314,8 +1314,8 @@ sub output_struct_text(%) {
     my %args = %{$_[0]};
     my ($parameter);
 
-    print $args{'type'}." ".$args{'struct'}." - ".$args{'purpose'}."\n\n";
-    print $args{'type'}." ".$args{'struct'}." {\n";
+    print $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "\n\n";
+    print $args{'type'} . " " . $args{'struct'} . " {\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
 	    print "$parameter\n";
@@ -1334,7 +1334,7 @@ sub output_struct_text(%) {
 	    # bitfield
 	    print "\t$1 $parameter$2;\n";
 	} else {
-	    print "\t".$type." ".$parameter.";\n";
+	    print "\t" . $type . " " . $parameter . ";\n";
 	}
     }
     print "};\n\n";
@@ -1348,7 +1348,7 @@ sub output_struct_text(%) {
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
 	print "$parameter\n\t";
-	print $args{'parameterdescs'}{$parameter_name}."\n";
+	print $args{'parameterdescs'}{$parameter_name} . "\n";
     }
     print "\n";
     output_section_text(@_);
@@ -1387,7 +1387,7 @@ sub output_declaration {
 # generic output function - calls the right one based on current output mode.
 sub output_blockhead {
     no strict 'refs';
-    my $func = "output_blockhead_".$output_mode;
+    my $func = "output_blockhead_" . $output_mode;
     &$func(@_);
     $section_counter++;
 }
@@ -1398,7 +1398,7 @@ sub output_blockhead {
 sub dump_declaration($$) {
     no strict 'refs';
     my ($prototype, $file) = @_;
-    my $func = "dump_".$decl_type;
+    my $func = "dump_" . $decl_type;
     &$func(@_);
 }
 
@@ -1645,7 +1645,7 @@ sub push_parameter($$$) {
 		    "or member '$param' not " .
 		    "described in '$declaration_name'\n";
 	    }
-	    print STDERR "Warning(${file}:$.):".
+	    print STDERR "Warning(${file}:$.):" .
 			 " No description found for parameter '$param'\n";
 	    ++$warnings;
 	}
@@ -1929,7 +1929,7 @@ sub process_state3_type($$) {
 	    ($2 eq '{') && $brcount++;
 	    ($2 eq '}') && $brcount--;
 	    if (($2 eq ';') && ($brcount == 0)) {
-		dump_declaration($prototype,$file);
+		dump_declaration($prototype, $file);
 		reset_state();
 		last;
 	    }
@@ -2106,7 +2106,7 @@ sub process_file($) {
 		    $section = $section_default;
 		    $contents = "";
 		} else {
-		    $contents .= $1."\n";
+		    $contents .= $1 . "\n";
 		}
 	    } else {
 		# i dont know - bad line?  ignore.
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index a3344285ccf..40e0045876e 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -641,7 +641,7 @@ static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
 	id->vendor = TO_NATIVE(id->vendor);
 
 	strcpy(alias, "virtio:");
-	ADD(alias, "d", 1, id->device);
+	ADD(alias, "d", id->device != VIRTIO_DEV_ANY_ID, id->device);
 	ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor);
 
 	add_wildcard(alias);
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 161b7846733..4522948a012 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -763,6 +763,8 @@ static void check_section(const char *modname, struct elf_info *elf,
 
 
 #define ALL_INIT_DATA_SECTIONS \
+	".init.setup$", ".init.rodata$", \
+	".devinit.rodata$", ".cpuinit.rodata$", ".meminit.rodata$" \
 	".init.data$", ".devinit.data$", ".cpuinit.data$", ".meminit.data$"
 #define ALL_EXIT_DATA_SECTIONS \
 	".exit.data$", ".devexit.data$", ".cpuexit.data$", ".memexit.data$"
@@ -772,21 +774,23 @@ static void check_section(const char *modname, struct elf_info *elf,
 #define ALL_EXIT_TEXT_SECTIONS \
 	".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$"
 
-#define ALL_INIT_SECTIONS ALL_INIT_DATA_SECTIONS, ALL_INIT_TEXT_SECTIONS
-#define ALL_EXIT_SECTIONS ALL_EXIT_DATA_SECTIONS, ALL_EXIT_TEXT_SECTIONS
+#define ALL_INIT_SECTIONS INIT_SECTIONS, DEV_INIT_SECTIONS, \
+	CPU_INIT_SECTIONS, MEM_INIT_SECTIONS
+#define ALL_EXIT_SECTIONS EXIT_SECTIONS, DEV_EXIT_SECTIONS, \
+	CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS
 
 #define DATA_SECTIONS ".data$", ".data.rel$"
 #define TEXT_SECTIONS ".text$"
 
-#define INIT_SECTIONS      ".init.data$", ".init.text$"
-#define DEV_INIT_SECTIONS  ".devinit.data$", ".devinit.text$"
-#define CPU_INIT_SECTIONS  ".cpuinit.data$", ".cpuinit.text$"
-#define MEM_INIT_SECTIONS  ".meminit.data$", ".meminit.text$"
+#define INIT_SECTIONS      ".init.*"
+#define DEV_INIT_SECTIONS  ".devinit.*"
+#define CPU_INIT_SECTIONS  ".cpuinit.*"
+#define MEM_INIT_SECTIONS  ".meminit.*"
 
-#define EXIT_SECTIONS      ".exit.data$", ".exit.text$"
-#define DEV_EXIT_SECTIONS  ".devexit.data$", ".devexit.text$"
-#define CPU_EXIT_SECTIONS  ".cpuexit.data$", ".cpuexit.text$"
-#define MEM_EXIT_SECTIONS  ".memexit.data$", ".memexit.text$"
+#define EXIT_SECTIONS      ".exit.*"
+#define DEV_EXIT_SECTIONS  ".devexit.*"
+#define CPU_EXIT_SECTIONS  ".cpuexit.*"
+#define MEM_EXIT_SECTIONS  ".memexit.*"
 
 /* init data sections */
 static const char *init_data_sections[] = { ALL_INIT_DATA_SECTIONS, NULL };
@@ -869,12 +873,36 @@ const struct sectioncheck sectioncheck[] = {
 	.tosec   = { INIT_SECTIONS, NULL },
 	.mismatch = XXXINIT_TO_INIT,
 },
+/* Do not reference cpuinit code/data from meminit code/data */
+{
+	.fromsec = { MEM_INIT_SECTIONS, NULL },
+	.tosec   = { CPU_INIT_SECTIONS, NULL },
+	.mismatch = XXXINIT_TO_INIT,
+},
+/* Do not reference meminit code/data from cpuinit code/data */
+{
+	.fromsec = { CPU_INIT_SECTIONS, NULL },
+	.tosec   = { MEM_INIT_SECTIONS, NULL },
+	.mismatch = XXXINIT_TO_INIT,
+},
 /* Do not reference exit code/data from devexit/cpuexit/memexit code/data */
 {
 	.fromsec = { DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS, NULL },
 	.tosec   = { EXIT_SECTIONS, NULL },
 	.mismatch = XXXEXIT_TO_EXIT,
 },
+/* Do not reference cpuexit code/data from memexit code/data */
+{
+	.fromsec = { MEM_EXIT_SECTIONS, NULL },
+	.tosec   = { CPU_EXIT_SECTIONS, NULL },
+	.mismatch = XXXEXIT_TO_EXIT,
+},
+/* Do not reference memexit code/data from cpuexit code/data */
+{
+	.fromsec = { CPU_EXIT_SECTIONS, NULL },
+	.tosec   = { MEM_EXIT_SECTIONS, NULL },
+	.mismatch = XXXEXIT_TO_EXIT,
+},
 /* Do not use exit code/data from init code */
 {
 	.fromsec = { ALL_INIT_SECTIONS, NULL },
@@ -1168,7 +1196,7 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		"The variable %s references\n"
 		"the %s %s%s%s\n"
 		"If the reference is valid then annotate the\n"
-		"variable with __init* (see linux/init.h) "
+		"variable with __init* or __refdata (see linux/init.h) "
 		"or name the variable:\n",
 		fromsym, to, sec2annotation(tosec), tosym, to_p);
 		while (*s)
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 1264b8e2829..01c2d13dd02 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -1,38 +1,58 @@
 #!/bin/sh
 #
-# builddeb 1.2
+# builddeb 1.3
 # Copyright 2003 Wichert Akkerman <wichert@wiggy.net>
 #
 # Simple script to generate a deb package for a Linux kernel. All the
-# complexity of what to do with a kernel after it is installer or removed
+# complexity of what to do with a kernel after it is installed or removed
 # is left to other scripts and packages: they can install scripts in the
-# /etc/kernel/{pre,post}{inst,rm}.d/ directories that will be called on
-# package install and removal.
+# /etc/kernel/{pre,post}{inst,rm}.d/ directories (or an alternative location
+# specified in KDEB_HOOKDIR) that will be called on package install and
+# removal.
 
 set -e
 
+create_package() {
+	local pname="$1" pdir="$2"
+
+	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+
+	# Fix ownership and permissions
+	chown -R root:root "$pdir"
+	chmod -R go-w "$pdir"
+
+	# Create the package
+	dpkg-gencontrol -isp -p$pname -P"$pdir"
+	dpkg --build "$pdir" ..
+}
+
 # Some variables and settings used throughout the script
 version=$KERNELRELEASE
-revision=`cat .version`
+revision=$(cat .version)
+if [ -n "$KDEB_PKGVERSION" ]; then
+	packageversion=$KDEB_PKGVERSION
+else
+	packageversion=$version-$revision
+fi
 tmpdir="$objtree/debian/tmp"
 fwdir="$objtree/debian/fwtmp"
-packagename=linux-$version
+packagename=linux-image-$version
 fwpackagename=linux-firmware-image
 
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	packagename=user-mode-linux-$version
 fi
 
 # Setup the directory structure
 rm -rf "$tmpdir" "$fwdir"
-mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
-mkdir -p "$fwdir/DEBIAN" "$fwdir/lib"
-if [ "$ARCH" == "um" ] ; then
-	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" "$tmpdir/usr/share/doc/$packagename"
+mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" "$fwdir/usr/share/doc/$fwpackagename"
+if [ "$ARCH" = "um" ] ; then
+	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/bin"
 fi
 
 # Build and install the kernel
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	$MAKE linux
 	cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
 	cp .config "$tmpdir/usr/share/doc/$packagename/config"
@@ -41,53 +61,100 @@ if [ "$ARCH" == "um" ] ; then
 else 
 	cp System.map "$tmpdir/boot/System.map-$version"
 	cp .config "$tmpdir/boot/config-$version"
-	cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+	# Not all arches include the boot path in KBUILD_IMAGE
+	if ! cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"; then
+		cp arch/$ARCH/boot/$KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+	fi
 fi
 
 if grep -q '^CONFIG_MODULES=y' .config ; then
 	INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
-	if [ "$ARCH" == "um" ] ; then
+	if [ "$ARCH" = "um" ] ; then
 		mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
 		rmdir "$tmpdir/lib/modules/$version"
 	fi
 fi
 
 # Install the maintainer scripts
+# Note: hook scripts under /etc/kernel are also executed by official Debian
+# kernel packages, as well as kernel packages built using make-kpkg
+debhookdir=${KDEB_HOOKDIR:-/etc/kernel}
 for script in postinst postrm preinst prerm ; do
-	mkdir -p "$tmpdir/etc/kernel/$script.d"
+	mkdir -p "$tmpdir$debhookdir/$script.d"
 	cat <<EOF > "$tmpdir/DEBIAN/$script"
 #!/bin/sh
 
 set -e
 
-test -d /etc/kernel/$script.d && run-parts --arg="$version" /etc/kernel/$script.d
+# Pass maintainer script parameters to hook scripts
+export DEB_MAINT_PARAMS="\$@"
+
+test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
 exit 0
 EOF
 	chmod 755 "$tmpdir/DEBIAN/$script"
 done
 
-name="Kernel Compiler <$(id -nu)@$(hostname -f)>"
+# Try to determine maintainer and email values
+if [ -n "$DEBEMAIL" ]; then
+       email=$DEBEMAIL
+elif [ -n "$EMAIL" ]; then
+       email=$EMAIL
+else
+       email=$(id -nu)@$(hostname -f)
+fi
+if [ -n "$DEBFULLNAME" ]; then
+       name=$DEBFULLNAME
+elif [ -n "$NAME" ]; then
+       name=$NAME
+else
+       name="Anonymous"
+fi
+maintainer="$name <$email>"
+
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
-linux ($version-$revision) unstable; urgency=low
+linux-upstream ($packageversion) unstable; urgency=low
 
-  * A standard release
+  * Custom built Linux kernel.
 
- -- $name  $(date -R)
+ -- $maintainer  $(date -R)
 EOF
 
-# Generate a control file
-if [ "$ARCH" == "um" ]; then
+# Generate copyright file
+cat <<EOF > debian/copyright
+This is a packacked upstream version of the Linux kernel.
+
+The sources may be found at most Linux ftp sites, including:
+ftp://ftp.kernel.org/pub/linux/kernel
 
+Copyright: 1991 - 2009 Linus Torvalds and others.
+
+The git repository for mainline kernel development is at:
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 dated June, 1991.
+
+On Debian GNU/Linux systems, the complete text of the GNU General Public
+License version 2 can be found in \`/usr/share/common-licenses/GPL-2'.
+EOF
+
+# Generate a control file
 cat <<EOF > debian/control
-Source: linux
-Section: base
+Source: linux-upstream
+Section: admin
 Priority: optional
-Maintainer: $name
-Standards-Version: 3.6.1
+Maintainer: $maintainer
+Standards-Version: 3.8.1
+EOF
+
+if [ "$ARCH" = "um" ]; then
+	cat <<EOF >> debian/control
 
 Package: $packagename
-Provides: kernel-image-$version, linux-image-$version
+Provides: linux-image, linux-image-2.6, linux-modules-$version
 Architecture: any
 Description: User Mode Linux kernel, version $version
  User-mode Linux is a port of the Linux kernel to its own system call
@@ -97,30 +164,22 @@ Description: User Mode Linux kernel, version $version
  many other things.
  .
  This package contains the Linux kernel, modules and corresponding other
- files version $version
+ files, version: $version.
 EOF
 
 else
-cat <<EOF > debian/control
-Source: linux
-Section: base
-Priority: optional
-Maintainer: $name
-Standards-Version: 3.6.1
+	cat <<EOF >> debian/control
 
 Package: $packagename
-Provides: kernel-image-$version, linux-image-$version
+Provides: linux-image, linux-image-2.6, linux-modules-$version
 Suggests: $fwpackagename
 Architecture: any
 Description: Linux kernel, version $version
  This package contains the Linux kernel, modules and corresponding other
- files version $version
+ files, version: $version.
 EOF
-fi
 
-# Fix some ownership and permissions
-chown -R root:root "$tmpdir"
-chmod -R go-w "$tmpdir"
+fi
 
 # Do we have firmware? Move it out of the way and build it into a package.
 if [ -e "$tmpdir/lib/firmware" ]; then
@@ -131,16 +190,12 @@ if [ -e "$tmpdir/lib/firmware" ]; then
 Package: $fwpackagename
 Architecture: all
 Description: Linux kernel firmware, version $version
- This package contains firmware from the Linux kernel, version $version
+ This package contains firmware from the Linux kernel, version $version.
 EOF
 
-	dpkg-gencontrol -isp -p$fwpackagename -P"$fwdir"
-	dpkg --build "$fwdir" ..
+	create_package "$fwpackagename" "$fwdir"
 fi
 
-# Perform the final magic
-dpkg-gencontrol -isp -p$packagename
-dpkg --build "$tmpdir" ..
+create_package "$packagename" "$tmpdir"
 
 exit 0
-
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 0fae7da0529..7109e2b5bc0 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -185,6 +185,19 @@ if ($arch eq "x86_64") {
     $objcopy .= " -O elf32-i386";
     $cc .= " -m32";
 
+} elsif ($arch eq "s390" && $bits == 32) {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
+    $alignment = 4;
+    $ld .= " -m elf_s390";
+    $cc .= " -m31";
+
+} elsif ($arch eq "s390" && $bits == 64) {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
+    $alignment = 8;
+    $type = ".quad";
+    $ld .= " -m elf64_s390";
+    $cc .= " -m64";
+
 } elsif ($arch eq "sh") {
     $alignment = 2;
 
@@ -213,6 +226,26 @@ if ($arch eq "x86_64") {
     if ($is_module eq "0") {
         $cc .= " -mconstant-gp";
     }
+} elsif ($arch eq "sparc64") {
+    # In the objdump output there are giblets like:
+    # 0000000000000000 <igmp_net_exit-0x18>:
+    # As there's some data blobs that get emitted into the
+    # text section before the first instructions and the first
+    # real symbols.  We don't want to match that, so to combat
+    # this we use '\w' so we'll match just plain symbol names,
+    # and not those that also include hex offsets inside of the
+    # '<>' brackets.  Actually the generic function_regex setting
+    # could safely use this too.
+    $function_regex = "^([0-9a-fA-F]+)\\s+<(\\w*?)>:";
+
+    # Sparc64 calls '_mcount' instead of plain 'mcount'.
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+
+    $alignment = 8;
+    $type = ".xword";
+    $ld .= " -m elf64_sparc";
+    $cc .= " -m64";
+    $objcopy .= " -O elf64-sparc";
 } else {
     die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
 }
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 00790472f64..46989b88d73 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -39,8 +39,10 @@ if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
 	        printf -- '-svn%s' "`git svn find-rev $head`"
 	fi
 
-	# Are there uncommitted changes?
-	git update-index --refresh --unmerged > /dev/null
+	# Update index only on r/w media
+	[ -w . ] && git update-index --refresh --unmerged > /dev/null
+
+	# Check for uncommitted changes
 	if git diff-index --name-only HEAD | grep -v "^scripts/package" \
 	    | read dummy; then
 		printf '%s' -dirty
diff --git a/scripts/unifdef.c b/scripts/unifdef.c
index 05a31a6c7e1..30d459fb070 100644
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -678,8 +678,10 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp)
 	if (*cp == '!') {
 		debug("eval%d !", ops - eval_ops);
 		cp++;
-		if (eval_unary(ops, valp, &cp) == LT_IF)
+		if (eval_unary(ops, valp, &cp) == LT_IF) {
+			*cpp = cp;
 			return (LT_IF);
+		}
 		*valp = !*valp;
 	} else if (*cp == '(') {
 		cp++;
@@ -700,13 +702,16 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp)
 			return (LT_IF);
 		cp = skipcomment(cp);
 		sym = findsym(cp);
-		if (sym < 0)
-			return (LT_IF);
-		*valp = (value[sym] != NULL);
 		cp = skipsym(cp);
 		cp = skipcomment(cp);
 		if (*cp++ != ')')
 			return (LT_IF);
+		if (sym >= 0)
+			*valp = (value[sym] != NULL);
+		else {
+			*cpp = cp;
+			return (LT_IF);
+		}
 		keepthis = false;
 	} else if (!endsym(*cp)) {
 		debug("eval%d symbol", ops - eval_ops);
@@ -741,11 +746,11 @@ eval_table(const struct ops *ops, int *valp, const char **cpp)
 	const struct op *op;
 	const char *cp;
 	int val;
+	Linetype lhs, rhs;
 
 	debug("eval%d", ops - eval_ops);
 	cp = *cpp;
-	if (ops->inner(ops+1, valp, &cp) == LT_IF)
-		return (LT_IF);
+	lhs = ops->inner(ops+1, valp, &cp);
 	for (;;) {
 		cp = skipcomment(cp);
 		for (op = ops->op; op->str != NULL; op++)
@@ -755,14 +760,32 @@ eval_table(const struct ops *ops, int *valp, const char **cpp)
 			break;
 		cp += strlen(op->str);
 		debug("eval%d %s", ops - eval_ops, op->str);
-		if (ops->inner(ops+1, &val, &cp) == LT_IF)
-			return (LT_IF);
-		*valp = op->fn(*valp, val);
+		rhs = ops->inner(ops+1, &val, &cp);
+		if (op->fn == op_and && (lhs == LT_FALSE || rhs == LT_FALSE)) {
+			debug("eval%d: and always false", ops - eval_ops);
+			if (lhs == LT_IF)
+				*valp = val;
+			lhs = LT_FALSE;
+			continue;
+		}
+		if (op->fn == op_or && (lhs == LT_TRUE || rhs == LT_TRUE)) {
+			debug("eval%d: or always true", ops - eval_ops);
+			if (lhs == LT_IF)
+				*valp = val;
+			lhs = LT_TRUE;
+			continue;
+		}
+		if (rhs == LT_IF)
+			lhs = LT_IF;
+		if (lhs != LT_IF)
+			*valp = op->fn(*valp, val);
 	}
 
 	*cpp = cp;
 	debug("eval%d = %d", ops - eval_ops, *valp);
-	return (*valp ? LT_TRUE : LT_FALSE);
+	if (lhs != LT_IF)
+		lhs = (*valp ? LT_TRUE : LT_FALSE);
+	return lhs;
 }
 
 /*
@@ -773,12 +796,15 @@ eval_table(const struct ops *ops, int *valp, const char **cpp)
 static Linetype
 ifeval(const char **cpp)
 {
+	const char *cp = *cpp;
 	int ret;
 	int val;
 
 	debug("eval %s", *cpp);
 	keepthis = killconsts ? false : true;
-	ret = eval_table(eval_ops, &val, cpp);
+	ret = eval_table(eval_ops, &val, &cp);
+	if (ret != LT_IF)
+		*cpp = cp;
 	debug("eval = %d", val);
 	return (keepthis ? LT_IF : ret);
 }
diff --git a/scripts/ver_linux b/scripts/ver_linux
index dbb3037f134..7de36df4eaa 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -65,7 +65,7 @@ sed -n -e '/^.*\/libc-\([^/]*\)\.so$/{s//\1/;p;q}' < /proc/self/maps
 ldd -v > /dev/null 2>&1 && ldd -v || ldd --version |head -n 1 | awk \
 'NR==1{print "Dynamic linker (ldd)  ", $NF}'
 
-ls -l /usr/lib/lib{g,stdc}++.so  2>/dev/null | awk -F. \
+ls -l /usr/lib/libg++.so /usr/lib/libstdc++.so  2>/dev/null | awk -F. \
        '{print "Linux C++ Library      " $4"."$5"."$6}'
 
 ps --version 2>&1 | grep version | awk \
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 195906bce26..15c2a08a66f 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -4495,7 +4495,7 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 	 * when the packet is on it's final way out.
 	 * NOTE: there appear to be some IPv6 multicast cases where skb->dst
 	 *       is NULL, in this case go ahead and apply access control. */
-	if (skb->dst != NULL && skb->dst->xfrm != NULL)
+	if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL)
 		return NF_ACCEPT;
 #endif
 	secmark_active = selinux_secmark_enabled();
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index c0eb72013d6..72b18452e1a 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -447,7 +447,7 @@ int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
 	struct dst_entry *dst;
 	int rc = 0;
 
-	dst = skb->dst;
+	dst = skb_dst(skb);
 
 	if (dst) {
 		struct dst_entry *dst_test;
diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
index fbf5c933baa..586965f9605 100644
--- a/sound/aoa/fabrics/layout.c
+++ b/sound/aoa/fabrics/layout.c
@@ -1037,7 +1037,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
 	}
 	ldev->selfptr_headphone.ptr = ldev;
 	ldev->selfptr_lineout.ptr = ldev;
-	sdev->ofdev.dev.driver_data = ldev;
+	dev_set_drvdata(&sdev->ofdev.dev, ldev);
 	list_add(&ldev->list, &layouts_list);
 	layouts_list_items++;
 
@@ -1081,7 +1081,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
 
 static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 	int i;
 
 	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
@@ -1114,7 +1114,7 @@ static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
 #ifdef CONFIG_PM
 static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 
 	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
 		ldev->gpio.methods->all_amps_off(&ldev->gpio);
@@ -1124,7 +1124,7 @@ static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t sta
 
 static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 
 	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
 		ldev->gpio.methods->all_amps_restore(&ldev->gpio);
diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index 418c84c99d6..4e3b819d499 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -358,14 +358,14 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match)
 		return -ENODEV;
 	}
 
-	dev->ofdev.dev.driver_data = control;
+	dev_set_drvdata(&dev->ofdev.dev, control);
 
 	return 0;
 }
 
 static int i2sbus_remove(struct macio_dev* dev)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct i2sbus_dev *i2sdev, *tmp;
 
 	list_for_each_entry_safe(i2sdev, tmp, &control->list, item)
@@ -377,7 +377,7 @@ static int i2sbus_remove(struct macio_dev* dev)
 #ifdef CONFIG_PM
 static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct codec_info_item *cii;
 	struct i2sbus_dev* i2sdev;
 	int err, ret = 0;
@@ -407,7 +407,7 @@ static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
 
 static int i2sbus_resume(struct macio_dev* dev)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct codec_info_item *cii;
 	struct i2sbus_dev* i2sdev;
 	int err, ret = 0;
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 5c48e36038f..dc78272fc39 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1089,7 +1089,7 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	aaci->base = ioremap(dev->res.start, SZ_4K);
+	aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!aaci->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 7bbdda041a9..6061fb5f4e1 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -205,3 +205,5 @@ config SND_PCM_XRUN_DEBUG
 
 config SND_VMASTER
 	bool
+
+source "sound/core/seq/Kconfig"
diff --git a/sound/core/init.c b/sound/core/init.c
index fd56afe846e..d5d40d78c40 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -152,15 +152,8 @@ int snd_card_create(int idx, const char *xid,
 	card = kzalloc(sizeof(*card) + extra_size, GFP_KERNEL);
 	if (!card)
 		return -ENOMEM;
-	if (xid) {
-		if (!snd_info_check_reserved_words(xid)) {
-			snd_printk(KERN_ERR
-				   "given id string '%s' is reserved.\n", xid);
-			err = -EBUSY;
-			goto __error;
-		}
+	if (xid)
 		strlcpy(card->id, xid, sizeof(card->id));
-	}
 	err = 0;
 	mutex_lock(&snd_card_mutex);
 	if (idx < 0) {
@@ -483,22 +476,28 @@ int snd_card_free(struct snd_card *card)
 
 EXPORT_SYMBOL(snd_card_free);
 
-static void choose_default_id(struct snd_card *card)
+static void snd_card_set_id_no_lock(struct snd_card *card, const char *nid)
 {
 	int i, len, idx_flag = 0, loops = SNDRV_CARDS;
-	char *id, *spos;
+	const char *spos, *src;
+	char *id;
 	
-	id = spos = card->shortname;	
-	while (*id != '\0') {
-		if (*id == ' ')
-			spos = id + 1;
-		id++;
+	if (nid == NULL) {
+		id = card->shortname;
+		spos = src = id;
+		while (*id != '\0') {
+			if (*id == ' ')
+				spos = id + 1;
+			id++;
+		}
+	} else {
+		spos = src = nid;
 	}
 	id = card->id;
 	while (*spos != '\0' && !isalnum(*spos))
 		spos++;
 	if (isdigit(*spos))
-		*id++ = isalpha(card->shortname[0]) ? card->shortname[0] : 'D';
+		*id++ = isalpha(src[0]) ? src[0] : 'D';
 	while (*spos != '\0' && (size_t)(id - card->id) < sizeof(card->id) - 1) {
 		if (isalnum(*spos))
 			*id++ = *spos;
@@ -513,7 +512,7 @@ static void choose_default_id(struct snd_card *card)
 
 	while (1) {
 	      	if (loops-- == 0) {
-      			snd_printk(KERN_ERR "unable to choose default card id (%s)\n", id);
+			snd_printk(KERN_ERR "unable to set card id (%s)\n", id);
       			strcpy(card->id, card->proc_root->name);
       			return;
       		}
@@ -539,14 +538,33 @@ static void choose_default_id(struct snd_card *card)
 			spos = id + len - 2;
 			if ((size_t)len <= sizeof(card->id) - 2)
 				spos++;
-			*spos++ = '_';
-			*spos++ = '1';
-			*spos++ = '\0';
+			*(char *)spos++ = '_';
+			*(char *)spos++ = '1';
+			*(char *)spos++ = '\0';
 			idx_flag++;
 		}
 	}
 }
 
+/**
+ *  snd_card_set_id - set card identification name
+ *  @card: soundcard structure
+ *  @nid: new identification string
+ *
+ *  This function sets the card identification and checks for name
+ *  collisions.
+ */
+void snd_card_set_id(struct snd_card *card, const char *nid)
+{
+	/* check if user specified own card->id */
+	if (card->id[0] != '\0')
+		return;
+	mutex_lock(&snd_card_mutex);
+	snd_card_set_id_no_lock(card, nid);
+	mutex_unlock(&snd_card_mutex);
+}
+EXPORT_SYMBOL(snd_card_set_id);
+
 #ifndef CONFIG_SYSFS_DEPRECATED
 static ssize_t
 card_id_show_attr(struct device *dev,
@@ -640,8 +658,7 @@ int snd_card_register(struct snd_card *card)
 		mutex_unlock(&snd_card_mutex);
 		return 0;
 	}
-	if (card->id[0] == '\0')
-		choose_default_id(card);
+	snd_card_set_id_no_lock(card, card->id[0] == '\0' ? NULL : card->id);
 	snd_cards[card->number] = card;
 	mutex_unlock(&snd_card_mutex);
 	init_info_for_card(card);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index d54d1a05fe6..f705eec7372 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -63,7 +63,7 @@ static int snd_jack_dev_register(struct snd_device *device)
 
 	/* Default to the sound card device. */
 	if (!jack->input_dev->dev.parent)
-		jack->input_dev->dev.parent = card->dev;
+		jack->input_dev->dev.parent = snd_card_get_device_link(card);
 
 	err = input_register_device(jack->input_dev);
 	if (err == 0)
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index dda000b9684..dbe406b8259 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -31,6 +31,7 @@
 #include <linux/time.h>
 #include <linux/vmalloc.h>
 #include <linux/moduleparam.h>
+#include <linux/math64.h>
 #include <linux/string.h>
 #include <sound/core.h>
 #include <sound/minors.h>
@@ -617,9 +618,7 @@ static long snd_pcm_oss_bytes(struct snd_pcm_substream *substream, long frames)
 #else
 	{
 		u64 bsize = (u64)runtime->oss.buffer_bytes * (u64)bytes;
-		u32 rem;
-		div64_32(&bsize, buffer_size, &rem);
-		return (long)bsize;
+		return div_u64(bsize, buffer_size);
 	}
 #endif
 }
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index d659995ac3a..333e4dd2945 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -22,6 +22,7 @@
 
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/math64.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/info.h>
@@ -126,24 +127,37 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram
 }
 
 #ifdef CONFIG_SND_PCM_XRUN_DEBUG
-#define xrun_debug(substream)	((substream)->pstr->xrun_debug)
+#define xrun_debug(substream, mask)	((substream)->pstr->xrun_debug & (mask))
 #else
-#define xrun_debug(substream)	0
+#define xrun_debug(substream, mask)	0
 #endif
 
-#define dump_stack_on_xrun(substream) do {	\
-		if (xrun_debug(substream) > 1)	\
-			dump_stack();		\
+#define dump_stack_on_xrun(substream) do {		\
+		if (xrun_debug(substream, 2))		\
+			dump_stack();			\
 	} while (0)
 
+static void pcm_debug_name(struct snd_pcm_substream *substream,
+			   char *name, size_t len)
+{
+	snprintf(name, len, "pcmC%dD%d%c:%d",
+		 substream->pcm->card->number,
+		 substream->pcm->device,
+		 substream->stream ? 'c' : 'p',
+		 substream->number);
+}
+
 static void xrun(struct snd_pcm_substream *substream)
 {
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 	snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-	if (xrun_debug(substream)) {
-		snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n",
-			   substream->pcm->card->number,
-			   substream->pcm->device,
-			   substream->stream ? 'c' : 'p');
+	if (xrun_debug(substream, 1)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd(KERN_DEBUG "XRUN: %s\n", name);
 		dump_stack_on_xrun(substream);
 	}
 }
@@ -154,16 +168,16 @@ snd_pcm_update_hw_ptr_pos(struct snd_pcm_substream *substream,
 {
 	snd_pcm_uframes_t pos;
 
-	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
-		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 	pos = substream->ops->pointer(substream);
 	if (pos == SNDRV_PCM_POS_XRUN)
 		return pos; /* XRUN */
 	if (pos >= runtime->buffer_size) {
 		if (printk_ratelimit()) {
-			snd_printd(KERN_ERR  "BUG: stream = %i, pos = 0x%lx, "
+			char name[16];
+			pcm_debug_name(substream, name, sizeof(name));
+			snd_printd(KERN_ERR  "BUG: %s, pos = 0x%lx, "
 				   "buffer size = 0x%lx, period size = 0x%lx\n",
-				   substream->stream, pos, runtime->buffer_size,
+				   name, pos, runtime->buffer_size,
 				   runtime->period_size);
 		}
 		pos = 0;
@@ -197,7 +211,7 @@ static int snd_pcm_update_hw_ptr_post(struct snd_pcm_substream *substream,
 
 #define hw_ptr_error(substream, fmt, args...)				\
 	do {								\
-		if (xrun_debug(substream)) {				\
+		if (xrun_debug(substream, 1)) {				\
 			if (printk_ratelimit()) {			\
 				snd_printd("PCM: " fmt, ##args);	\
 			}						\
@@ -251,7 +265,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 	}
 
 	/* Do jiffies check only in xrun_debug mode */
-	if (!xrun_debug(substream))
+	if (!xrun_debug(substream, 4))
 		goto no_jiffies_check;
 
 	/* Skip the jiffies check for hardwares with BATCH flag.
@@ -261,6 +275,9 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 	if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
 		goto no_jiffies_check;
 	hdelta = new_hw_ptr - old_hw_ptr;
+	if (hdelta < runtime->delay)
+		goto no_jiffies_check;
+	hdelta -= runtime->delay;
 	jdelta = jiffies - runtime->hw_ptr_jiffies;
 	if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		delta = jdelta /
@@ -294,14 +311,20 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 		hw_ptr_interrupt =
 			new_hw_ptr - new_hw_ptr % runtime->period_size;
 	}
+	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, new_hw_ptr);
 
+	if (runtime->status->hw_ptr == new_hw_ptr)
+		return 0;
+
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
 	runtime->hw_ptr_jiffies = jiffies;
-	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -342,8 +365,12 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 		new_hw_ptr = hw_base + pos;
 	}
 	/* Do jiffies check only in xrun_debug mode */
-	if (xrun_debug(substream) &&
-	    ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
+	if (!xrun_debug(substream, 4))
+		goto no_jiffies_check;
+	if (delta < runtime->delay)
+		goto no_jiffies_check;
+	delta -= runtime->delay;
+	if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		hw_ptr_error(substream,
 			     "hw_ptr skipping! "
 			     "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
@@ -352,13 +379,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 			     ((delta * HZ) / runtime->rate));
 		return 0;
 	}
+ no_jiffies_check:
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, new_hw_ptr);
 
+	if (runtime->status->hw_ptr == new_hw_ptr)
+		return 0;
+
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
 	runtime->hw_ptr_jiffies = jiffies;
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -452,7 +485,7 @@ static inline unsigned int muldiv32(unsigned int a, unsigned int b,
 		*r = 0;
 		return UINT_MAX;
 	}
-	div64_32(&n, c, r);
+	n = div_u64_rem(n, c, r);
 	if (n >= UINT_MAX) {
 		*r = 0;
 		return UINT_MAX;
@@ -1524,6 +1557,23 @@ static int snd_pcm_lib_ioctl_channel_info(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
+				       void *arg)
+{
+	struct snd_pcm_hw_params *params = arg;
+	snd_pcm_format_t format;
+	int channels, width;
+
+	params->fifo_size = substream->runtime->hw.fifo_size;
+	if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) {
+		format = params_format(params);
+		channels = params_channels(params);
+		width = snd_pcm_format_physical_width(format);
+		params->fifo_size /= width * channels;
+	}
+	return 0;
+}
+
 /**
  * snd_pcm_lib_ioctl - a generic PCM ioctl callback
  * @substream: the pcm substream instance
@@ -1545,6 +1595,8 @@ int snd_pcm_lib_ioctl(struct snd_pcm_substream *substream,
 		return snd_pcm_lib_ioctl_reset(substream, arg);
 	case SNDRV_PCM_IOCTL1_CHANNEL_INFO:
 		return snd_pcm_lib_ioctl_channel_info(substream, arg);
+	case SNDRV_PCM_IOCTL1_FIFO_SIZE:
+		return snd_pcm_lib_ioctl_fifo_size(substream, arg);
 	}
 	return -ENXIO;
 }
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index b5da656d1ec..84da3ba17c8 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -312,9 +312,18 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream,
 
 	hw = &substream->runtime->hw;
 	if (!params->info)
-		params->info = hw->info;
-	if (!params->fifo_size)
-		params->fifo_size = hw->fifo_size;
+		params->info = hw->info & ~SNDRV_PCM_INFO_FIFO_IN_FRAMES;
+	if (!params->fifo_size) {
+		if (snd_mask_min(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT]) ==
+		    snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT]) &&
+                    snd_mask_min(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS]) ==
+                    snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
+			changed = substream->ops->ioctl(substream,
+					SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
+			if (params < 0)
+				return changed;
+		}
+	}
 	params->rmask = 0;
 	return 0;
 }
@@ -587,14 +596,15 @@ int snd_pcm_status(struct snd_pcm_substream *substream,
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		status->avail = snd_pcm_playback_avail(runtime);
 		if (runtime->status->state == SNDRV_PCM_STATE_RUNNING ||
-		    runtime->status->state == SNDRV_PCM_STATE_DRAINING)
+		    runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
 			status->delay = runtime->buffer_size - status->avail;
-		else
+			status->delay += runtime->delay;
+		} else
 			status->delay = 0;
 	} else {
 		status->avail = snd_pcm_capture_avail(runtime);
 		if (runtime->status->state == SNDRV_PCM_STATE_RUNNING)
-			status->delay = status->avail;
+			status->delay = status->avail + runtime->delay;
 		else
 			status->delay = 0;
 	}
@@ -2410,6 +2420,7 @@ static int snd_pcm_delay(struct snd_pcm_substream *substream,
 			n = snd_pcm_playback_hw_avail(runtime);
 		else
 			n = snd_pcm_capture_avail(runtime);
+		n += runtime->delay;
 		break;
 	case SNDRV_PCM_STATE_XRUN:
 		err = -EPIPE;
diff --git a/sound/core/seq/Kconfig b/sound/core/seq/Kconfig
new file mode 100644
index 00000000000..b851fd890a8
--- /dev/null
+++ b/sound/core/seq/Kconfig
@@ -0,0 +1,16 @@
+# define SND_XXX_SEQ to min(SND_SEQUENCER,SND_XXX)
+
+config SND_RAWMIDI_SEQ
+	def_tristate SND_SEQUENCER && SND_RAWMIDI
+
+config SND_OPL3_LIB_SEQ
+	def_tristate SND_SEQUENCER && SND_OPL3_LIB
+
+config SND_OPL4_LIB_SEQ
+	def_tristate SND_SEQUENCER && SND_OPL4_LIB
+
+config SND_SBAWE_SEQ
+	def_tristate SND_SEQUENCER && SND_SBAWE
+
+config SND_EMU10K1_SEQ
+	def_tristate SND_SEQUENCER && SND_EMU10K1
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 069593717fb..1bcb360330e 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -17,14 +17,6 @@ snd-seq-midi-event-objs := seq_midi_event.o
 snd-seq-dummy-objs := seq_dummy.o
 snd-seq-virmidi-objs := seq_virmidi.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
 ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
@@ -33,8 +25,8 @@ obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_VIRMIDI) += snd-seq-virmidi.o snd-seq-midi-event.o
-obj-$(call sequencer,$(CONFIG_SND_RAWMIDI)) += snd-seq-midi.o snd-seq-midi-event.o
-obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o
-obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-seq-midi-emul.o snd-seq-virmidi.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-seq-midi-emul.o snd-seq-virmidi.o
+obj-$(CONFIG_SND_RAWMIDI_SEQ) += snd-seq-midi.o snd-seq-midi-event.o
+obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o
+obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o
diff --git a/sound/drivers/opl3/Makefile b/sound/drivers/opl3/Makefile
index 19767a6a5c5..7f2c2a10c4e 100644
--- a/sound/drivers/opl3/Makefile
+++ b/sound/drivers/opl3/Makefile
@@ -7,14 +7,6 @@ snd-opl3-lib-objs := opl3_lib.o opl3_synth.o
 snd-opl3-synth-y := opl3_seq.o opl3_midi.o opl3_drums.o
 snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_OPL3_LIB) += snd-opl3-lib.o
 obj-$(CONFIG_SND_OPL4_LIB) += snd-opl3-lib.o
-obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-opl3-synth.o
+obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-opl3-synth.o
diff --git a/sound/drivers/opl4/Makefile b/sound/drivers/opl4/Makefile
index d178b39ffa6..b94009b0b19 100644
--- a/sound/drivers/opl4/Makefile
+++ b/sound/drivers/opl4/Makefile
@@ -6,13 +6,5 @@
 snd-opl4-lib-objs := opl4_lib.o opl4_mixer.o opl4_proc.o
 snd-opl4-synth-objs := opl4_seq.o opl4_synth.o yrw801.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_OPL4_LIB) += snd-opl4-lib.o
-obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-opl4-synth.o
+obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-opl4-synth.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index c6942a4de99..51a7e3777e1 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -177,15 +177,18 @@ config SND_ES18XX
 	  will be called snd-es18xx.
 
 config SND_SC6000
-	tristate "Gallant SC-6000, Audio Excel DSP 16"
+	tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
 	depends on HAS_IOPORT
 	select SND_WSS_LIB
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	help
-	  Say Y here to include support for Gallant SC-6000 card and clones:
+	  Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
+	  cards and clones:
 	  Audio Excel DSP 16 and Zoltrix AV302.
 
+	  These cards are based on CompuMedia ASC-9308 or ASC-9408 chips.
+
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-sc6000.
 
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 442b081cafb..07df201ed8f 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -193,7 +193,7 @@ static int __devexit snd_es1688_remove(struct device *dev, unsigned int n)
 static struct isa_driver snd_es1688_driver = {
 	.match		= snd_es1688_match,
 	.probe		= snd_es1688_probe,
-	.remove		= snd_es1688_remove,
+	.remove		= __devexit_p(snd_es1688_remove),
 #if 0	/* FIXME */
 	.suspend	= snd_es1688_suspend,
 	.resume		= snd_es1688_resume,
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 180a8dea6bd..65e4b18581a 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -348,7 +348,7 @@ static int __devexit snd_gusextreme_remove(struct device *dev, unsigned int n)
 static struct isa_driver snd_gusextreme_driver = {
 	.match		= snd_gusextreme_match,
 	.probe		= snd_gusextreme_probe,
-	.remove		= snd_gusextreme_remove,
+	.remove		= __devexit_p(snd_gusextreme_remove),
 #if 0	/* FIXME */
 	.suspend	= snd_gusextreme_suspend,
 	.resume		= snd_gusextreme_resume,
diff --git a/sound/isa/sb/Makefile b/sound/isa/sb/Makefile
index 1098a56b2f4..faeffceb01b 100644
--- a/sound/isa/sb/Makefile
+++ b/sound/isa/sb/Makefile
@@ -13,14 +13,6 @@ snd-sbawe-objs := sbawe.o emu8000.o
 snd-emu8000-synth-objs := emu8000_synth.o emu8000_callback.o emu8000_patch.o emu8000_pcm.o
 snd-es968-objs := es968.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_SB_COMMON) += snd-sb-common.o
 obj-$(CONFIG_SND_SB16_DSP) += snd-sb16-dsp.o
@@ -33,4 +25,4 @@ ifeq ($(CONFIG_SND_SB16_CSP),y)
   obj-$(CONFIG_SND_SB16) += snd-sb16-csp.o
   obj-$(CONFIG_SND_SBAWE) += snd-sb16-csp.o
 endif
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emu8000-synth.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emu8000-synth.o
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index 782010608ef..9a8bbf6dd62 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -2,6 +2,8 @@
  *  Driver for Gallant SC-6000 soundcard. This card is also known as
  *  Audio Excel DSP 16 or Zoltrix AV302.
  *  These cards use CompuMedia ASC-9308 chip + AD1848 codec.
+ *  SC-6600 and SC-7000 cards are also supported. They are based on
+ *  CompuMedia ASC-9408 chip and CS4231 codec.
  *
  *  Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
  *
@@ -54,6 +56,7 @@ static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
 						/* 0x300, 0x310, 0x320, 0x330 */
 static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;	/* 5, 7, 9, 10, 0 */
 static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;	/* 0, 1, 3 */
+static bool joystick[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = false };
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard.");
@@ -73,6 +76,8 @@ module_param_array(mpu_irq, int, NULL, 0444);
 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
 module_param_array(dma, int, NULL, 0444);
 MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
+module_param_array(joystick, bool, NULL, 0444);
+MODULE_PARM_DESC(joystick, "Enable gameport.");
 
 /*
  * Commands of SC6000's DSP (SBPRO+special).
@@ -191,7 +196,7 @@ static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
 	return val;
 }
 
-static __devinit int sc6000_wait_data(char __iomem *vport)
+static int sc6000_wait_data(char __iomem *vport)
 {
 	int loop = 1000;
 	unsigned char val = 0;
@@ -206,7 +211,7 @@ static __devinit int sc6000_wait_data(char __iomem *vport)
 	return -EAGAIN;
 }
 
-static __devinit int sc6000_read(char __iomem *vport)
+static int sc6000_read(char __iomem *vport)
 {
 	if (sc6000_wait_data(vport))
 		return -EBUSY;
@@ -215,7 +220,7 @@ static __devinit int sc6000_read(char __iomem *vport)
 
 }
 
-static __devinit int sc6000_write(char __iomem *vport, int cmd)
+static int sc6000_write(char __iomem *vport, int cmd)
 {
 	unsigned char val;
 	int loop = 500000;
@@ -276,8 +281,33 @@ static int __devinit sc6000_dsp_reset(char __iomem *vport)
 }
 
 /* detection and initialization */
-static int __devinit sc6000_cfg_write(char __iomem *vport,
-				      unsigned char softcfg)
+static int __devinit sc6000_hw_cfg_write(char __iomem *vport, const int *cfg)
+{
+	if (sc6000_write(vport, COMMAND_6C) < 0) {
+		snd_printk(KERN_WARNING "CMD 0x%x: failed!\n", COMMAND_6C);
+		return -EIO;
+	}
+	if (sc6000_write(vport, COMMAND_5C) < 0) {
+		snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_5C);
+		return -EIO;
+	}
+	if (sc6000_write(vport, cfg[0]) < 0) {
+		snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[0]);
+		return -EIO;
+	}
+	if (sc6000_write(vport, cfg[1]) < 0) {
+		snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[1]);
+		return -EIO;
+	}
+	if (sc6000_write(vport, COMMAND_C5) < 0) {
+		snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_C5);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sc6000_cfg_write(char __iomem *vport, unsigned char softcfg)
 {
 
 	if (sc6000_write(vport, WRITE_MDIRQ_CFG)) {
@@ -291,7 +321,7 @@ static int __devinit sc6000_cfg_write(char __iomem *vport,
 	return 0;
 }
 
-static int __devinit sc6000_setup_board(char __iomem *vport, int config)
+static int sc6000_setup_board(char __iomem *vport, int config)
 {
 	int loop = 10;
 
@@ -334,16 +364,39 @@ static int __devinit sc6000_init_mss(char __iomem *vport, int config,
 	return 0;
 }
 
-static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
-					char __iomem *vmss_port, int mpu_irq)
+static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg,
+					   long xport, long xmpu,
+					   long xmss_port, int joystick)
+{
+	cfg[0] = 0;
+	cfg[1] = 0;
+	if (xport == 0x240)
+		cfg[0] |= 1;
+	if (xmpu != SNDRV_AUTO_PORT) {
+		cfg[0] |= (xmpu & 0x30) >> 2;
+		cfg[1] |= 0x20;
+	}
+	if (xmss_port == 0xe80)
+		cfg[0] |= 0x10;
+	cfg[0] |= 0x40;		/* always set */
+	if (!joystick)
+		cfg[0] |= 0x02;
+	cfg[1] |= 0x80;		/* enable WSS system */
+	cfg[1] &= ~0x40;	/* disable IDE */
+	snd_printd("hw cfg %x, %x\n", cfg[0], cfg[1]);
+}
+
+static int __devinit sc6000_init_board(char __iomem *vport,
+					char __iomem *vmss_port, int dev)
 {
 	char answer[15];
 	char version[2];
-	int mss_config = sc6000_irq_to_softcfg(irq) |
-			 sc6000_dma_to_softcfg(dma);
+	int mss_config = sc6000_irq_to_softcfg(irq[dev]) |
+			 sc6000_dma_to_softcfg(dma[dev]);
 	int config = mss_config |
-		     sc6000_mpu_irq_to_softcfg(mpu_irq);
+		     sc6000_mpu_irq_to_softcfg(mpu_irq[dev]);
 	int err;
+	int old = 0;
 
 	err = sc6000_dsp_reset(vport);
 	if (err < 0) {
@@ -360,7 +413,6 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
 	/*
 	 * My SC-6000 card return "SC-6000" in DSPCopyright, so
 	 * if we have something different, we have to be warned.
-	 * Mine returns "SC-6000A " - KH
 	 */
 	if (strncmp("SC-6000", answer, 7))
 		snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n");
@@ -372,13 +424,32 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
 	printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n",
 		answer, version[0], version[1]);
 
-	/*
-	 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
-	 */
-	err = sc6000_cfg_write(vport, 0x0a);
+	/* set configuration */
+	sc6000_write(vport, COMMAND_5C);
+	if (sc6000_read(vport) < 0)
+		old = 1;
+
+	if (!old) {
+		int cfg[2];
+		sc6000_hw_cfg_encode(vport, &cfg[0], port[dev], mpu_port[dev],
+				     mss_port[dev], joystick[dev]);
+		if (sc6000_hw_cfg_write(vport, cfg) < 0) {
+			snd_printk(KERN_ERR "sc6000_hw_cfg_write: failed!\n");
+			return -EIO;
+		}
+	}
+	err = sc6000_setup_board(vport, config);
 	if (err < 0) {
-		snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
-		return -EFAULT;
+		snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
+		return -ENODEV;
+	}
+
+	sc6000_dsp_reset(vport);
+
+	if (!old) {
+		sc6000_write(vport, COMMAND_60);
+		sc6000_write(vport, 0x02);
+		sc6000_dsp_reset(vport);
 	}
 
 	err = sc6000_setup_board(vport, config);
@@ -386,10 +457,9 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
 		snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
 		return -ENODEV;
 	}
-
 	err = sc6000_init_mss(vport, config, vmss_port, mss_config);
 	if (err < 0) {
-		snd_printk(KERN_ERR "Can not initialize "
+		snd_printk(KERN_ERR "Cannot initialize "
 			   "Microsoft Sound System mode.\n");
 		return -ENODEV;
 	}
@@ -485,14 +555,16 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 	struct snd_card *card;
 	struct snd_wss *chip;
 	struct snd_opl3 *opl3;
-	char __iomem *vport;
+	char __iomem **vport;
 	char __iomem *vmss_port;
 
 
-	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(vport),
+				&card);
 	if (err < 0)
 		return err;
 
+	vport = card->private_data;
 	if (xirq == SNDRV_AUTO_IRQ) {
 		xirq = snd_legacy_find_free_irq(possible_irqs);
 		if (xirq < 0) {
@@ -517,8 +589,8 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		err = -EBUSY;
 		goto err_exit;
 	}
-	vport = devm_ioport_map(devptr, port[dev], 0x10);
-	if (!vport) {
+	*vport = devm_ioport_map(devptr, port[dev], 0x10);
+	if (*vport == NULL) {
 		snd_printk(KERN_ERR PFX
 			   "I/O port cannot be iomaped.\n");
 		err = -EBUSY;
@@ -533,7 +605,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		goto err_unmap1;
 	}
 	vmss_port = devm_ioport_map(devptr, mss_port[dev], 4);
-	if (!vport) {
+	if (!vmss_port) {
 		snd_printk(KERN_ERR PFX
 			   "MSS port I/O cannot be iomaped.\n");
 		err = -EBUSY;
@@ -544,7 +616,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		   port[dev], xirq, xdma,
 		   mpu_irq[dev] == SNDRV_AUTO_IRQ ? 0 : mpu_irq[dev]);
 
-	err = sc6000_init_board(vport, xirq, xdma, vmss_port, mpu_irq[dev]);
+	err = sc6000_init_board(*vport, vmss_port, dev);
 	if (err < 0)
 		goto err_unmap2;
 
@@ -552,7 +624,6 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 			     WSS_HW_DETECT, 0, &chip);
 	if (err < 0)
 		goto err_unmap2;
-	card->private_data = chip;
 
 	err = snd_wss_pcm(chip, 0, NULL);
 	if (err < 0) {
@@ -608,6 +679,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 	return 0;
 
 err_unmap2:
+	sc6000_setup_board(*vport, 0);
 	release_region(mss_port[dev], 4);
 err_unmap1:
 	release_region(port[dev], 0x10);
@@ -618,11 +690,17 @@ err_exit:
 
 static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
 {
+	struct snd_card *card = dev_get_drvdata(devptr);
+	char __iomem **vport = card->private_data;
+
+	if (sc6000_setup_board(*vport, 0) < 0)
+		snd_printk(KERN_WARNING "sc6000_setup_board failed on exit!\n");
+
 	release_region(port[dev], 0x10);
 	release_region(mss_port[dev], 4);
 
-	snd_card_free(dev_get_drvdata(devptr));
 	dev_set_drvdata(devptr, NULL);
+	snd_card_free(card);
 	return 0;
 }
 
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index 66f3b48ceaf..e497525bc11 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -619,8 +619,7 @@ static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
 /* hw_free callback */
 static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
 {
-	if (substream->runtime->dma_area)
-		vfree(substream->runtime->dma_area);
+	vfree(substream->runtime->dma_area);
 	substream->runtime->dma_area = NULL;
 	return 0;
 }
diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c
index e4282d93a1a..21eb6dce46d 100644
--- a/sound/oss/msnd.c
+++ b/sound/oss/msnd.c
@@ -100,7 +100,7 @@ void msnd_fifo_free(msnd_fifo *f)
 int msnd_fifo_alloc(msnd_fifo *f, size_t n)
 {
 	msnd_fifo_free(f);
-	f->data = (char *)vmalloc(n);
+	f->data = vmalloc(n);
 	f->n = n;
 	f->tail = 0;
 	f->head = 0;
diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c
index 6055fd6d3b3..e924492df21 100644
--- a/sound/parisc/harmony.c
+++ b/sound/parisc/harmony.c
@@ -935,7 +935,7 @@ snd_harmony_create(struct snd_card *card,
 	h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE);
 	if (h->iobase == NULL) {
 		printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n",
-		       padev->hpa.start);
+		       (unsigned long)padev->hpa.start);
 		err = -EBUSY;
 		goto free_and_ret;
 	}
@@ -1020,7 +1020,7 @@ static struct parisc_driver snd_harmony_driver = {
 	.name = "harmony",
 	.id_table = snd_harmony_devtable,
 	.probe = snd_harmony_probe,
-	.remove = snd_harmony_remove,
+	.remove = __devexit_p(snd_harmony_remove),
 };
 
 static int __init 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 93422e3a3f0..748f6b7d90b 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -275,6 +275,16 @@ config SND_CS5535AUDIO
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-cs5535audio.
 
+config SND_CTXFI
+	tristate "Creative Sound Blaster X-Fi"
+	select SND_PCM
+	help
+	  If you want to use soundcards based on Creative Sound Blastr X-Fi
+	  boards with 20k1 or 20k2 chips, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-ctxfi.
+
 config SND_DARLA20
 	tristate "(Echoaudio) Darla20"
 	select FW_LOADER
@@ -532,6 +542,9 @@ config SND_HDSP
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-hdsp.
 
+comment "Don't forget to add built-in firmwares for HDSP driver"
+	depends on SND_HDSP=y
+
 config SND_HDSPM
 	tristate "RME Hammerfall DSP MADI"
 	select SND_HWDEP
@@ -622,6 +635,16 @@ config SND_KORG1212
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-korg1212.
 
+config SND_LX6464ES
+	tristate "Digigram LX6464ES"
+	select SND_PCM
+	help
+	  Say Y here to include support for Digigram LX6464ES boards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-lx6464es.
+
+
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
 	select SND_AC97_CODEC
@@ -764,8 +787,8 @@ config SND_VIRTUOSO
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, and
-	  Essence STX.
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X,
+	  Essence ST (Deluxe), and Essence STX.
 	  Support for the HDAV1.3 (Deluxe) is very experimental.
 
 	  To compile this driver as a module, choose M here: the module
diff --git a/sound/pci/Makefile b/sound/pci/Makefile
index 65b25d221cd..ecfc609d2b9 100644
--- a/sound/pci/Makefile
+++ b/sound/pci/Makefile
@@ -59,9 +59,11 @@ obj-$(CONFIG_SND) += \
 	ali5451/ \
 	au88x0/ \
 	aw2/ \
+	ctxfi/ \
 	ca0106/ \
 	cs46xx/ \
 	cs5535audio/ \
+	lx6464es/ \
 	echoaudio/ \
 	emu10k1/ \
 	hda/ \
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 3906f5afe27..23f49f356e0 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1255,8 +1255,8 @@ static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
 	int temp;
 
 	temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
-	temp = (dma->period_virt * dma->period_bytes) + (temp & POS_MASK);
-	return (temp);
+	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
+	return temp;
 }
 
 static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
@@ -1504,8 +1504,7 @@ static int inline vortex_wtdma_getlinearpos(vortex_t * vortex, int wtdma)
 	int temp;
 
 	temp = hwread(vortex->mmio, VORTEX_WTDMA_STAT + (wtdma << 2));
-	//temp = (temp & POS_MASK) + (((temp>>WT_SUBBUF_SHIFT) & WT_SUBBUF_MASK)*(dma->cfg0&POS_MASK));
-	temp = (temp & POS_MASK) + ((dma->period_virt) * (dma->period_bytes));
+	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
 	return temp;
 }
 
@@ -2441,7 +2440,8 @@ static irqreturn_t vortex_interrupt(int irq, void *dev_id)
 		spin_lock(&vortex->lock);
 		for (i = 0; i < NR_ADB; i++) {
 			if (vortex->dma_adb[i].fifo_status == FIFO_START) {
-				if (vortex_adbdma_bufshift(vortex, i)) ;
+				if (!vortex_adbdma_bufshift(vortex, i))
+					continue;
 				spin_unlock(&vortex->lock);
 				snd_pcm_period_elapsed(vortex->dma_adb[i].
 						       substream);
diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c
index 6a3891ab69d..296123ab74f 100644
--- a/sound/pci/aw2/aw2-saa7146.c
+++ b/sound/pci/aw2/aw2-saa7146.c
@@ -108,7 +108,7 @@ void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
 #endif
 	/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
 
-	/* At initialization WS1 and WS2 are disbaled (configured as input */
+	/* At initialization WS1 and WS2 are disabled (configured as input) */
 	acon1 |= 0 * WS1_CTRL;
 	acon1 |= 0 * WS2_CTRL;
 
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index ce3f2e90f4d..24585c6c6d0 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -810,6 +810,8 @@ static struct pci_device_id snd_bt87x_ids[] = {
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
 	/* Voodoo TV 200 */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
+	/* Askey Computer Corp. MagicTView'99 */
+	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x144f, 0x3000, GENERIC),
 	/* AVerMedia Studio No. 103, 203, ...? */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1461, 0x0003, AVPHONE98),
 	/* Prolink PixelView PV-M4900 */
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index bfac30f7929..57b992a5c05 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1319,7 +1319,6 @@ static int __devinit snd_ca0106_pcm(struct snd_ca0106 *emu, int device)
         }
 
 	pcm->info_flags = 0;
-	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
 	strcpy(pcm->name, "CA0106");
 
 	for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; 
diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c
index c111efe61c3..c8c6f437f5b 100644
--- a/sound/pci/ca0106/ca0106_mixer.c
+++ b/sound/pci/ca0106/ca0106_mixer.c
@@ -739,7 +739,7 @@ static int __devinit rename_ctl(struct snd_card *card, const char *src, const ch
 	} while (0)
 
 static __devinitdata
-DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 50, 1);
+DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 25, 1);
 
 static char *slave_vols[] __devinitdata = {
 	"Analog Front Playback Volume",
@@ -841,6 +841,9 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu)
 					      snd_ca0106_master_db_scale);
 	if (!vmaster)
 		return -ENOMEM;
+	err = snd_ctl_add(card, vmaster);
+	if (err < 0)
+		return err;
 	add_slaves(card, vmaster, slave_vols);
 
 	if (emu->details->spi_dac == 1) {
@@ -848,8 +851,13 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu)
 						      NULL);
 		if (!vmaster)
 			return -ENOMEM;
+		err = snd_ctl_add(card, vmaster);
+		if (err < 0)
+			return err;
 		add_slaves(card, vmaster, slave_sws);
 	}
+
+	strcpy(card->mixername, "CA0106");
         return 0;
 }
 
diff --git a/sound/pci/ctxfi/Makefile b/sound/pci/ctxfi/Makefile
new file mode 100644
index 00000000000..15075f89e98
--- /dev/null
+++ b/sound/pci/ctxfi/Makefile
@@ -0,0 +1,5 @@
+snd-ctxfi-objs := xfi.o ctatc.o ctvmem.o ctpcm.o ctmixer.o ctresource.o \
+	ctsrc.o ctamixer.o ctdaio.o ctimap.o cthardware.o cttimer.o \
+	cthw20k2.o cthw20k1.o
+
+obj-$(CONFIG_SND_CTXFI) += snd-ctxfi.o
diff --git a/sound/pci/ctxfi/ct20k1reg.h b/sound/pci/ctxfi/ct20k1reg.h
new file mode 100644
index 00000000000..f2e34e3f27e
--- /dev/null
+++ b/sound/pci/ctxfi/ct20k1reg.h
@@ -0,0 +1,636 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#ifndef CT20K1REG_H
+#define CT20k1REG_H
+
+/* 20k1 registers */
+#define 	DSPXRAM_START 			0x000000
+#define 	DSPXRAM_END 			0x013FFC
+#define 	DSPAXRAM_START 			0x020000
+#define 	DSPAXRAM_END 			0x023FFC
+#define 	DSPYRAM_START 			0x040000
+#define 	DSPYRAM_END 			0x04FFFC
+#define 	DSPAYRAM_START 			0x020000
+#define 	DSPAYRAM_END 			0x063FFC
+#define 	DSPMICRO_START 			0x080000
+#define 	DSPMICRO_END 			0x0B3FFC
+#define 	DSP0IO_START 			0x100000
+#define 	DSP0IO_END	 		0x101FFC
+#define 	AUDIORINGIPDSP0_START 		0x100000
+#define 	AUDIORINGIPDSP0_END 		0x1003FC
+#define 	AUDIORINGOPDSP0_START 		0x100400
+#define 	AUDIORINGOPDSP0_END 		0x1007FC
+#define 	AUDPARARINGIODSP0_START 	0x100800
+#define 	AUDPARARINGIODSP0_END	 	0x100BFC
+#define 	DSP0LOCALHWREG_START 		0x100C00
+#define 	DSP0LOCALHWREG_END	 	0x100C3C
+#define 	DSP0XYRAMAGINDEX_START 		0x100C40
+#define 	DSP0XYRAMAGINDEX_END	 	0x100C5C
+#define 	DSP0XYRAMAGMDFR_START 		0x100C60
+#define 	DSP0XYRAMAGMDFR_END	 	0x100C7C
+#define 	DSP0INTCONTLVEC_START 		0x100C80
+#define 	DSP0INTCONTLVEC_END	 	0x100CD8
+#define 	INTCONTLGLOBALREG_START 	0x100D1C
+#define 	INTCONTLGLOBALREG_END	 	0x100D3C
+#define		HOSTINTFPORTADDRCONTDSP0	0x100D40
+#define		HOSTINTFPORTDATADSP0		0x100D44
+#define		TIME0PERENBDSP0			0x100D60
+#define		TIME0COUNTERDSP0		0x100D64
+#define		TIME1PERENBDSP0			0x100D68
+#define		TIME1COUNTERDSP0		0x100D6C
+#define		TIME2PERENBDSP0			0x100D70
+#define		TIME2COUNTERDSP0		0x100D74
+#define		TIME3PERENBDSP0			0x100D78
+#define		TIME3COUNTERDSP0		0x100D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP0 	0x100D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP0	0x100D9C
+#define 	XRAMINDOPERREFUP_STARTDSP0	0x100DA0
+#define 	XRAMINDOPERREFUP_ENDDSP0	0x100DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP0 	0x100DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP0 	0x100DDC
+#define 	YRAMINDOPERREFUP_STARTDSP0	0x100DE0
+#define 	YRAMINDOPERREFUP_ENDDSP0 	0x100DFC
+#define 	DSP0CONDCODE 			0x100E00
+#define 	DSP0STACKFLAG 			0x100E04
+#define 	DSP0PROGCOUNTSTACKPTREG 	0x100E08
+#define 	DSP0PROGCOUNTSTACKDATAREG 	0x100E0C
+#define 	DSP0CURLOOPADDRREG 		0x100E10
+#define 	DSP0CURLOOPCOUNT 		0x100E14
+#define 	DSP0TOPLOOPCOUNTSTACK 		0x100E18
+#define 	DSP0TOPLOOPADDRSTACK 		0x100E1C
+#define 	DSP0LOOPSTACKPTR 		0x100E20
+#define 	DSP0STASSTACKDATAREG 		0x100E24
+#define 	DSP0STASSTACKPTR 		0x100E28
+#define 	DSP0PROGCOUNT 			0x100E2C
+#define  	GLOBDSPDEBGREG			0x100E30
+#define  	GLOBDSPBREPTRREG		0x100E30
+#define 	DSP0XYRAMBASE_START 		0x100EA0
+#define 	DSP0XYRAMBASE_END 		0x100EBC
+#define 	DSP0XYRAMLENG_START 		0x100EC0
+#define 	DSP0XYRAMLENG_END 		0x100EDC
+#define		SEMAPHOREREGDSP0		0x100EE0
+#define		DSP0INTCONTMASKREG		0x100EE4
+#define		DSP0INTCONTPENDREG		0x100EE8
+#define		DSP0INTCONTSERVINT		0x100EEC
+#define		DSPINTCONTEXTINTMODREG		0x100EEC
+#define		GPIODSP0			0x100EFC
+#define 	DMADSPBASEADDRREG_STARTDSP0	0x100F00
+#define 	DMADSPBASEADDRREG_ENDDSP0	0x100F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP0	0x100F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP0	0x100F3C
+#define 	DMADSPCURADDRREG_STARTDSP0	0x100F40
+#define 	DMADSPCURADDRREG_ENDDSP0	0x100F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP0	0x100F60
+#define 	DMAHOSTCURADDRREG_ENDDSP0	0x100F7C
+#define 	DMATANXCOUNTREG_STARTDSP0	0x100F80
+#define 	DMATANXCOUNTREG_ENDDSP0		0x100F9C
+#define 	DMATIMEBUGREG_STARTDSP0		0x100FA0
+#define 	DMATIMEBUGREG_ENDDSP0		0x100FAC
+#define 	DMACNTLMODFREG_STARTDSP0	0x100FA0
+#define 	DMACNTLMODFREG_ENDDSP0		0x100FAC
+
+#define 	DMAGLOBSTATSREGDSP0		0x100FEC
+#define 	DSP0XGPRAM_START 		0x101000
+#define 	DSP0XGPRAM_END 			0x1017FC
+#define 	DSP0YGPRAM_START 		0x101800
+#define 	DSP0YGPRAM_END 			0x101FFC
+
+
+
+
+#define 	AUDIORINGIPDSP1_START 		0x102000
+#define 	AUDIORINGIPDSP1_END	 	0x1023FC
+#define 	AUDIORINGOPDSP1_START 		0x102400
+#define 	AUDIORINGOPDSP1_END	 	0x1027FC
+#define 	AUDPARARINGIODSP1_START 	0x102800
+#define 	AUDPARARINGIODSP1_END	 	0x102BFC
+#define 	DSP1LOCALHWREG_START 		0x102C00
+#define 	DSP1LOCALHWREG_END	 	0x102C3C
+#define 	DSP1XYRAMAGINDEX_START 		0x102C40
+#define 	DSP1XYRAMAGINDEX_END	 	0x102C5C
+#define 	DSP1XYRAMAGMDFR_START 		0x102C60
+#define 	DSP1XYRAMAGMDFR_END	 	0x102C7C
+#define 	DSP1INTCONTLVEC_START 		0x102C80
+#define 	DSP1INTCONTLVEC_END	 	0x102CD8
+#define		HOSTINTFPORTADDRCONTDSP1	0x102D40
+#define		HOSTINTFPORTDATADSP1		0x102D44
+#define		TIME0PERENBDSP1			0x102D60
+#define		TIME0COUNTERDSP1		0x102D64
+#define		TIME1PERENBDSP1			0x102D68
+#define		TIME1COUNTERDSP1		0x102D6C
+#define		TIME2PERENBDSP1			0x102D70
+#define		TIME2COUNTERDSP1		0x102D74
+#define		TIME3PERENBDSP1			0x102D78
+#define		TIME3COUNTERDSP1		0x102D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP1 	0x102D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP1	0x102D9C
+#define 	XRAMINDOPERREFUP_STARTDSP1	0x102DA0
+#define 	XRAMINDOPERREFUP_ENDDSP1	0x102DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP1 	0x102DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP1	0x102DDC
+#define 	YRAMINDOPERREFUP_STARTDSP1	0x102DE0
+#define 	YRAMINDOPERREFUP_ENDDSP1	0x102DFC
+
+#define 	DSP1CONDCODE 			0x102E00
+#define 	DSP1STACKFLAG 			0x102E04
+#define 	DSP1PROGCOUNTSTACKPTREG 	0x102E08
+#define 	DSP1PROGCOUNTSTACKDATAREG 	0x102E0C
+#define 	DSP1CURLOOPADDRREG 		0x102E10
+#define 	DSP1CURLOOPCOUNT 		0x102E14
+#define 	DSP1TOPLOOPCOUNTSTACK 		0x102E18
+#define 	DSP1TOPLOOPADDRSTACK 		0x102E1C
+#define 	DSP1LOOPSTACKPTR 		0x102E20
+#define 	DSP1STASSTACKDATAREG 		0x102E24
+#define 	DSP1STASSTACKPTR 		0x102E28
+#define 	DSP1PROGCOUNT 			0x102E2C
+#define 	DSP1XYRAMBASE_START 		0x102EA0
+#define 	DSP1XYRAMBASE_END 		0x102EBC
+#define 	DSP1XYRAMLENG_START 		0x102EC0
+#define 	DSP1XYRAMLENG_END 		0x102EDC
+#define		SEMAPHOREREGDSP1		0x102EE0
+#define		DSP1INTCONTMASKREG		0x102EE4
+#define		DSP1INTCONTPENDREG		0x102EE8
+#define		DSP1INTCONTSERVINT		0x102EEC
+#define		GPIODSP1			0x102EFC
+#define 	DMADSPBASEADDRREG_STARTDSP1	0x102F00
+#define 	DMADSPBASEADDRREG_ENDDSP1	0x102F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP1	0x102F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP1	0x102F3C
+#define 	DMADSPCURADDRREG_STARTDSP1	0x102F40
+#define 	DMADSPCURADDRREG_ENDDSP1	0x102F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP1	0x102F60
+#define 	DMAHOSTCURADDRREG_ENDDSP1	0x102F7C
+#define 	DMATANXCOUNTREG_STARTDSP1	0x102F80
+#define 	DMATANXCOUNTREG_ENDDSP1		0x102F9C
+#define 	DMATIMEBUGREG_STARTDSP1		0x102FA0
+#define 	DMATIMEBUGREG_ENDDSP1		0x102FAC
+#define 	DMACNTLMODFREG_STARTDSP1	0x102FA0
+#define 	DMACNTLMODFREG_ENDDSP1		0x102FAC
+
+#define 	DMAGLOBSTATSREGDSP1		0x102FEC
+#define 	DSP1XGPRAM_START 		0x103000
+#define 	DSP1XGPRAM_END 			0x1033FC
+#define 	DSP1YGPRAM_START 		0x103400
+#define 	DSP1YGPRAM_END 			0x1037FC
+
+
+
+#define 	AUDIORINGIPDSP2_START 		0x104000
+#define 	AUDIORINGIPDSP2_END	 	0x1043FC
+#define 	AUDIORINGOPDSP2_START 		0x104400
+#define 	AUDIORINGOPDSP2_END	 	0x1047FC
+#define 	AUDPARARINGIODSP2_START 	0x104800
+#define 	AUDPARARINGIODSP2_END	 	0x104BFC
+#define 	DSP2LOCALHWREG_START 		0x104C00
+#define 	DSP2LOCALHWREG_END	 	0x104C3C
+#define 	DSP2XYRAMAGINDEX_START 		0x104C40
+#define 	DSP2XYRAMAGINDEX_END	 	0x104C5C
+#define 	DSP2XYRAMAGMDFR_START 		0x104C60
+#define 	DSP2XYRAMAGMDFR_END		0x104C7C
+#define 	DSP2INTCONTLVEC_START 		0x104C80
+#define 	DSP2INTCONTLVEC_END	 	0x104CD8
+#define		HOSTINTFPORTADDRCONTDSP2	0x104D40
+#define		HOSTINTFPORTDATADSP2		0x104D44
+#define		TIME0PERENBDSP2			0x104D60
+#define		TIME0COUNTERDSP2		0x104D64
+#define		TIME1PERENBDSP2			0x104D68
+#define		TIME1COUNTERDSP2		0x104D6C
+#define		TIME2PERENBDSP2			0x104D70
+#define		TIME2COUNTERDSP2		0x104D74
+#define		TIME3PERENBDSP2			0x104D78
+#define		TIME3COUNTERDSP2		0x104D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP2 	0x104D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP2	0x104D9C
+#define 	XRAMINDOPERREFUP_STARTDSP2	0x104DA0
+#define 	XRAMINDOPERREFUP_ENDDSP2	0x104DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP2 	0x104DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP2	0x104DDC
+#define 	YRAMINDOPERREFUP_STARTDSP2	0x104DE0
+#define 	YRAMINDOPERREFUP_ENDDSP2 	0x104DFC
+#define 	DSP2CONDCODE 			0x104E00
+#define 	DSP2STACKFLAG 			0x104E04
+#define 	DSP2PROGCOUNTSTACKPTREG 	0x104E08
+#define 	DSP2PROGCOUNTSTACKDATAREG 	0x104E0C
+#define 	DSP2CURLOOPADDRREG 		0x104E10
+#define 	DSP2CURLOOPCOUNT 		0x104E14
+#define 	DSP2TOPLOOPCOUNTSTACK 		0x104E18
+#define 	DSP2TOPLOOPADDRSTACK 		0x104E1C
+#define 	DSP2LOOPSTACKPTR 		0x104E20
+#define 	DSP2STASSTACKDATAREG 		0x104E24
+#define 	DSP2STASSTACKPTR 		0x104E28
+#define 	DSP2PROGCOUNT 			0x104E2C
+#define 	DSP2XYRAMBASE_START 		0x104EA0
+#define 	DSP2XYRAMBASE_END 		0x104EBC
+#define 	DSP2XYRAMLENG_START 		0x104EC0
+#define 	DSP2XYRAMLENG_END 		0x104EDC
+#define		SEMAPHOREREGDSP2		0x104EE0
+#define		DSP2INTCONTMASKREG		0x104EE4
+#define		DSP2INTCONTPENDREG		0x104EE8
+#define		DSP2INTCONTSERVINT		0x104EEC
+#define		GPIODSP2			0x104EFC
+#define 	DMADSPBASEADDRREG_STARTDSP2	0x104F00
+#define 	DMADSPBASEADDRREG_ENDDSP2	0x104F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP2	0x104F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP2	0x104F3C
+#define 	DMADSPCURADDRREG_STARTDSP2	0x104F40
+#define 	DMADSPCURADDRREG_ENDDSP2	0x104F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP2	0x104F60
+#define 	DMAHOSTCURADDRREG_ENDDSP2	0x104F7C
+#define 	DMATANXCOUNTREG_STARTDSP2	0x104F80
+#define 	DMATANXCOUNTREG_ENDDSP2		0x104F9C
+#define 	DMATIMEBUGREG_STARTDSP2		0x104FA0
+#define 	DMATIMEBUGREG_ENDDSP2		0x104FAC
+#define 	DMACNTLMODFREG_STARTDSP2	0x104FA0
+#define 	DMACNTLMODFREG_ENDDSP2		0x104FAC
+
+#define 	DMAGLOBSTATSREGDSP2		0x104FEC
+#define 	DSP2XGPRAM_START 		0x105000
+#define 	DSP2XGPRAM_END 			0x1051FC
+#define 	DSP2YGPRAM_START 		0x105800
+#define 	DSP2YGPRAM_END 			0x1059FC
+
+
+
+#define 	AUDIORINGIPDSP3_START 		0x106000
+#define 	AUDIORINGIPDSP3_END	 	0x1063FC
+#define 	AUDIORINGOPDSP3_START 		0x106400
+#define 	AUDIORINGOPDSP3_END	 	0x1067FC
+#define 	AUDPARARINGIODSP3_START 	0x106800
+#define 	AUDPARARINGIODSP3_END	 	0x106BFC
+#define 	DSP3LOCALHWREG_START 		0x106C00
+#define 	DSP3LOCALHWREG_END	 	0x106C3C
+#define 	DSP3XYRAMAGINDEX_START 		0x106C40
+#define 	DSP3XYRAMAGINDEX_END	 	0x106C5C
+#define 	DSP3XYRAMAGMDFR_START 		0x106C60
+#define 	DSP3XYRAMAGMDFR_END		0x106C7C
+#define 	DSP3INTCONTLVEC_START 		0x106C80
+#define 	DSP3INTCONTLVEC_END	 	0x106CD8
+#define		HOSTINTFPORTADDRCONTDSP3	0x106D40
+#define		HOSTINTFPORTDATADSP3		0x106D44
+#define		TIME0PERENBDSP3			0x106D60
+#define		TIME0COUNTERDSP3		0x106D64
+#define		TIME1PERENBDSP3			0x106D68
+#define		TIME1COUNTERDSP3		0x106D6C
+#define		TIME2PERENBDSP3			0x106D70
+#define		TIME2COUNTERDSP3		0x106D74
+#define		TIME3PERENBDSP3			0x106D78
+#define		TIME3COUNTERDSP3		0x106D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP3 	0x106D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP3	0x106D9C
+#define 	XRAMINDOPERREFUP_STARTDSP3	0x106DA0
+#define 	XRAMINDOPERREFUP_ENDDSP3	0x106DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP3 	0x106DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP3	0x106DDC
+#define 	YRAMINDOPERREFUP_STARTDSP3	0x106DE0
+#define 	YRAMINDOPERREFUP_ENDDSP3	0x100DFC
+
+#define 	DSP3CONDCODE 			0x106E00
+#define 	DSP3STACKFLAG 			0x106E04
+#define 	DSP3PROGCOUNTSTACKPTREG 	0x106E08
+#define 	DSP3PROGCOUNTSTACKDATAREG 	0x106E0C
+#define 	DSP3CURLOOPADDRREG 		0x106E10
+#define 	DSP3CURLOOPCOUNT 		0x106E14
+#define 	DSP3TOPLOOPCOUNTSTACK 		0x106E18
+#define 	DSP3TOPLOOPADDRSTACK 		0x106E1C
+#define 	DSP3LOOPSTACKPTR 		0x106E20
+#define 	DSP3STASSTACKDATAREG 		0x106E24
+#define 	DSP3STASSTACKPTR 		0x106E28
+#define 	DSP3PROGCOUNT 			0x106E2C
+#define 	DSP3XYRAMBASE_START 		0x106EA0
+#define 	DSP3XYRAMBASE_END 		0x106EBC
+#define 	DSP3XYRAMLENG_START 		0x106EC0
+#define 	DSP3XYRAMLENG_END 		0x106EDC
+#define		SEMAPHOREREGDSP3		0x106EE0
+#define		DSP3INTCONTMASKREG		0x106EE4
+#define		DSP3INTCONTPENDREG		0x106EE8
+#define		DSP3INTCONTSERVINT		0x106EEC
+#define		GPIODSP3			0x106EFC
+#define 	DMADSPBASEADDRREG_STARTDSP3	0x106F00
+#define 	DMADSPBASEADDRREG_ENDDSP3	0x106F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP3	0x106F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP3	0x106F3C
+#define 	DMADSPCURADDRREG_STARTDSP3	0x106F40
+#define 	DMADSPCURADDRREG_ENDDSP3	0x106F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP3	0x106F60
+#define 	DMAHOSTCURADDRREG_ENDDSP3	0x106F7C
+#define 	DMATANXCOUNTREG_STARTDSP3	0x106F80
+#define 	DMATANXCOUNTREG_ENDDSP3		0x106F9C
+#define 	DMATIMEBUGREG_STARTDSP3		0x106FA0
+#define 	DMATIMEBUGREG_ENDDSP3		0x106FAC
+#define 	DMACNTLMODFREG_STARTDSP3	0x106FA0
+#define 	DMACNTLMODFREG_ENDDSP3		0x106FAC
+
+#define 	DMAGLOBSTATSREGDSP3		0x106FEC
+#define 	DSP3XGPRAM_START 		0x107000
+#define 	DSP3XGPRAM_END 			0x1071FC
+#define 	DSP3YGPRAM_START 		0x107800
+#define 	DSP3YGPRAM_END 			0x1079FC
+
+/* end of DSP reg definitions */
+
+#define  	DSPAIMAP_START			0x108000
+#define  	DSPAIMAP_END			0x1083FC
+#define  	DSPPIMAP_START			0x108400
+#define  	DSPPIMAP_END			0x1087FC
+#define  	DSPPOMAP_START			0x108800
+#define  	DSPPOMAP_END			0x108BFC
+#define  	DSPPOCTL			0x108C00
+#define 	TKCTL_START			0x110000
+#define 	TKCTL_END			0x110FFC
+#define 	TKCC_START			0x111000
+#define 	TKCC_END			0x111FFC
+#define 	TKIMAP_START			0x112000
+#define 	TKIMAP_END			0x112FFC
+#define		TKDCTR16			0x113000
+#define		TKPB16				0x113004
+#define		TKBS16				0x113008
+#define		TKDCTR32			0x11300C
+#define		TKPB32				0x113010
+#define		TKBS32				0x113014
+#define		ICDCTR16			0x113018
+#define		ITBS16				0x11301C
+#define		ICDCTR32			0x113020
+#define		ITBS32				0x113024
+#define		ITSTART				0x113028
+#define		TKSQ				0x11302C
+
+#define		TKSCCTL_START			0x114000
+#define		TKSCCTL_END			0x11403C
+#define		TKSCADR_START			0x114100
+#define		TKSCADR_END			0x11413C
+#define		TKSCDATAX_START			0x114800
+#define		TKSCDATAX_END			0x1149FC
+#define		TKPCDATAX_START			0x120000
+#define		TKPCDATAX_END			0x12FFFC
+
+#define		MALSA				0x130000
+#define		MAPPHA				0x130004
+#define		MAPPLA				0x130008
+#define		MALSB				0x130010
+#define		MAPPHB				0x130014
+#define		MAPPLB				0x130018
+
+#define 	TANSPORTMAPABREGS_START		0x130020
+#define 	TANSPORTMAPABREGS_END		0x13A2FC
+
+#define		PTPAHX				0x13B000
+#define		PTPALX				0x13B004
+
+#define		TANSPPAGETABLEPHYADDR015_START	0x13B008
+#define		TANSPPAGETABLEPHYADDR015_END	0x13B07C
+#define		TRNQADRX_START			0x13B100
+#define		TRNQADRX_END			0x13B13C
+#define		TRNQTIMX_START			0x13B200
+#define		TRNQTIMX_END			0x13B23C
+#define		TRNQAPARMX_START		0x13B300
+#define		TRNQAPARMX_END			0x13B33C
+
+#define		TRNQCNT				0x13B400
+#define		TRNCTL				0x13B404
+#define		TRNIS				0x13B408
+#define		TRNCURTS			0x13B40C
+
+#define		AMOP_START			0x140000
+#define		AMOPLO				0x140000
+#define		AMOPHI				0x140004
+#define		AMOP_END			0x147FFC
+#define		PMOP_START			0x148000
+#define		PMOPLO				0x148000
+#define		PMOPHI				0x148004
+#define		PMOP_END			0x14FFFC
+#define		PCURR_START			0x150000
+#define		PCURR_END			0x153FFC
+#define		PTRAG_START			0x154000
+#define		PTRAG_END			0x157FFC
+#define		PSR_START			0x158000
+#define		PSR_END				0x15BFFC
+
+#define		PFSTAT4SEG_START		0x160000
+#define		PFSTAT4SEG_END			0x160BFC
+#define		PFSTAT2SEG_START		0x160C00
+#define		PFSTAT2SEG_END			0x1617FC
+#define		PFTARG4SEG_START		0x164000
+#define		PFTARG4SEG_END			0x164BFC
+#define		PFTARG2SEG_START		0x164C00
+#define		PFTARG2SEG_END			0x1657FC
+#define		PFSR4SEG_START			0x168000
+#define		PFSR4SEG_END			0x168BFC
+#define		PFSR2SEG_START			0x168C00
+#define		PFSR2SEG_END			0x1697FC
+#define		PCURRMS4SEG_START		0x16C000
+#define		PCURRMS4SEG_END			0x16CCFC
+#define		PCURRMS2SEG_START		0x16CC00
+#define		PCURRMS2SEG_END			0x16D7FC
+#define		PTARGMS4SEG_START		0x170000
+#define		PTARGMS4SEG_END			0x172FFC
+#define		PTARGMS2SEG_START		0x173000
+#define		PTARGMS2SEG_END			0x1747FC
+#define		PSRMS4SEG_START			0x170000
+#define		PSRMS4SEG_END			0x172FFC
+#define		PSRMS2SEG_START			0x173000
+#define		PSRMS2SEG_END			0x1747FC
+
+#define		PRING_LO_START			0x190000
+#define		PRING_LO_END			0x193FFC
+#define		PRING_HI_START			0x194000
+#define		PRING_HI_END			0x197FFC
+#define		PRING_LO_HI_START		0x198000
+#define		PRING_LO_HI			0x198000
+#define		PRING_LO_HI_END			0x19BFFC
+
+#define		PINTFIFO			0x1A0000
+#define		SRCCTL				0x1B0000
+#define		SRCCCR				0x1B0004
+#define		SRCIMAP				0x1B0008
+#define		SRCODDC				0x1B000C
+#define		SRCCA				0x1B0010
+#define		SRCCF				0x1B0014
+#define		SRCSA				0x1B0018
+#define		SRCLA				0x1B001C
+#define		SRCCTLSWR			0x1B0020
+
+/* SRC HERE */
+#define		SRCALBA				0x1B002C
+#define		SRCMCTL				0x1B012C
+#define		SRCCERR				0x1B022C
+#define		SRCITB				0x1B032C
+#define		SRCIPM				0x1B082C
+#define		SRCIP				0x1B102C
+#define		SRCENBSTAT			0x1B202C
+#define		SRCENBLO			0x1B212C
+#define		SRCENBHI			0x1B222C
+#define		SRCENBS				0x1B232C
+#define		SRCENB				0x1B282C
+#define		SRCENB07			0x1B282C
+#define		SRCENBS07			0x1B302C
+
+#define		SRCDN0Z				0x1B0030
+#define		SRCDN0Z0			0x1B0030
+#define		SRCDN0Z1			0x1B0034
+#define		SRCDN0Z2			0x1B0038
+#define		SRCDN0Z3			0x1B003C
+#define		SRCDN1Z				0x1B0040
+#define		SRCDN1Z0			0x1B0040
+#define		SRCDN1Z1			0x1B0044
+#define		SRCDN1Z2			0x1B0048
+#define		SRCDN1Z3			0x1B004C
+#define		SRCDN1Z4			0x1B0050
+#define		SRCDN1Z5			0x1B0054
+#define		SRCDN1Z6			0x1B0058
+#define		SRCDN1Z7			0x1B005C
+#define		SRCUPZ				0x1B0060
+#define		SRCUPZ0				0x1B0060
+#define		SRCUPZ1				0x1B0064
+#define		SRCUPZ2				0x1B0068
+#define		SRCUPZ3				0x1B006C
+#define		SRCUPZ4				0x1B0070
+#define		SRCUPZ5				0x1B0074
+#define		SRCUPZ6				0x1B0078
+#define		SRCUPZ7				0x1B007C
+#define		SRCCD0				0x1B0080
+#define		SRCCD1				0x1B0084
+#define		SRCCD2				0x1B0088
+#define		SRCCD3				0x1B008C
+#define		SRCCD4				0x1B0090
+#define		SRCCD5				0x1B0094
+#define		SRCCD6				0x1B0098
+#define		SRCCD7				0x1B009C
+#define		SRCCD8				0x1B00A0
+#define		SRCCD9				0x1B00A4
+#define		SRCCDA				0x1B00A8
+#define		SRCCDB				0x1B00AC
+#define		SRCCDC				0x1B00B0
+#define		SRCCDD				0x1B00B4
+#define		SRCCDE				0x1B00B8
+#define		SRCCDF				0x1B00BC
+#define		SRCCD10				0x1B00C0
+#define		SRCCD11				0x1B00C4
+#define		SRCCD12				0x1B00C8
+#define		SRCCD13				0x1B00CC
+#define		SRCCD14				0x1B00D0
+#define		SRCCD15				0x1B00D4
+#define		SRCCD16				0x1B00D8
+#define		SRCCD17				0x1B00DC
+#define		SRCCD18				0x1B00E0
+#define		SRCCD19				0x1B00E4
+#define		SRCCD1A				0x1B00E8
+#define		SRCCD1B				0x1B00EC
+#define		SRCCD1C				0x1B00F0
+#define		SRCCD1D				0x1B00F4
+#define		SRCCD1E				0x1B00F8
+#define		SRCCD1F				0x1B00FC
+
+#define		SRCCONTRBLOCK_START		0x1B0100
+#define		SRCCONTRBLOCK_END		0x1BFFFC
+#define		FILTOP_START	0x1C0000
+#define		FILTOP_END	0x1C05FC
+#define		FILTIMAP_START	0x1C0800
+#define		FILTIMAP_END	0x1C0DFC
+#define		FILTZ1_START	0x1C1000
+#define		FILTZ1_END	0x1C15FC
+#define		FILTZ2_START	0x1C1800
+#define		FILTZ2_END	0x1C1DFC
+#define		DAOIMAP_START	0x1C5000
+#define		DAOIMAP		0x1C5000
+#define		DAOIMAP_END	0x1C5124
+
+#define		AC97D		0x1C5400
+#define		AC97A		0x1C5404
+#define		AC97CTL		0x1C5408
+#define		I2SCTL		0x1C5420
+
+#define		SPOS		0x1C5440
+#define		SPOSA		0x1C5440
+#define		SPOSB		0x1C5444
+#define		SPOSC		0x1C5448
+#define		SPOSD		0x1C544C
+
+#define		SPISA		0x1C5450
+#define		SPISB		0x1C5454
+#define		SPISC		0x1C5458
+#define		SPISD		0x1C545C
+
+#define		SPFSCTL		0x1C5460
+
+#define		SPFS0		0x1C5468
+#define		SPFS1		0x1C546C
+#define		SPFS2		0x1C5470
+#define		SPFS3		0x1C5474
+#define		SPFS4		0x1C5478
+#define		SPFS5		0x1C547C
+
+#define		SPOCTL		0x1C5480
+#define		SPICTL		0x1C5484
+#define		SPISTS		0x1C5488
+#define		SPINTP		0x1C548C
+#define		SPINTE		0x1C5490
+#define		SPUTCTLAB	0x1C5494
+#define		SPUTCTLCD	0x1C5498
+
+#define		SRTSPA		0x1C54C0
+#define		SRTSPB		0x1C54C4
+#define		SRTSPC		0x1C54C8
+#define		SRTSPD		0x1C54CC
+
+#define		SRTSCTL		0x1C54D0
+#define		SRTSCTLA	0x1C54D0
+#define		SRTSCTLB	0x1C54D4
+#define		SRTSCTLC	0x1C54D8
+#define		SRTSCTLD	0x1C54DC
+
+#define		SRTI2S		0x1C54E0
+#define		SRTICTL		0x1C54F0
+
+#define		WC		0x1C6000
+#define		TIMR		0x1C6004
+# define	TIMR_IE		(1<<15)
+# define	TIMR_IP		(1<<14)
+
+#define		GIP		0x1C6010
+#define		GIE		0x1C6014
+#define		DIE		0x1C6018
+#define		DIC		0x1C601C
+#define		GPIO		0x1C6020
+#define		GPIOCTL		0x1C6024
+#define		GPIP		0x1C6028
+#define		GPIE		0x1C602C
+#define		DSPINT0		0x1C6030
+#define		DSPEIOC		0x1C6034
+#define		MUADAT		0x1C6040
+#define		MUACMD		0x1C6044
+#define 	MUASTAT		0x1C6044
+#define		MUBDAT		0x1C6048
+#define		MUBCMD		0x1C604C
+#define		MUBSTAT		0x1C604C
+#define		UARTCMA		0x1C6050
+#define		UARTCMB		0x1C6054
+#define		UARTIP		0x1C6058
+#define		UARTIE		0x1C605C
+#define		PLLCTL		0x1C6060
+#define		PLLDCD		0x1C6064
+#define		GCTL		0x1C6070
+#define		ID0		0x1C6080
+#define		ID1		0x1C6084
+#define		ID2		0x1C6088
+#define		ID3		0x1C608C
+#define		SDRCTL		0x1C7000
+
+
+#define I2SA_L    0x0L
+#define I2SA_R    0x1L
+#define I2SB_L    0x8L
+#define I2SB_R    0x9L
+#define I2SC_L    0x10L
+#define I2SC_R    0x11L
+#define I2SD_L    0x18L
+#define I2SD_R    0x19L
+
+#endif /* CT20K1REG_H */
+
+
diff --git a/sound/pci/ctxfi/ct20k2reg.h b/sound/pci/ctxfi/ct20k2reg.h
new file mode 100644
index 00000000000..2d07986f57c
--- /dev/null
+++ b/sound/pci/ctxfi/ct20k2reg.h
@@ -0,0 +1,85 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#ifndef _20K2REGISTERS_H_
+#define _20K2REGISTERS_H_
+
+
+/* Timer Registers */
+#define TIMER_TIMR          0x1B7004
+#define INTERRUPT_GIP       0x1B7010
+#define INTERRUPT_GIE       0x1B7014
+
+/* I2C Registers */
+#define I2C_IF_ADDRESS   0x1B9000
+#define I2C_IF_WDATA     0x1B9004
+#define I2C_IF_RDATA     0x1B9008
+#define I2C_IF_STATUS    0x1B900C
+#define I2C_IF_WLOCK     0x1B9010
+
+/* Global Control Registers */
+#define GLOBAL_CNTL_GCTL    0x1B7090
+
+/* PLL Registers */
+#define PLL_CTL 		0x1B7080
+#define PLL_STAT		0x1B7084
+#define PLL_ENB			0x1B7088
+
+/* SRC Registers */
+#define SRC_CTL             0x1A0000 /* 0x1A0000 + (256 * Chn) */
+#define SRC_CCR             0x1A0004 /* 0x1A0004 + (256 * Chn) */
+#define SRC_IMAP            0x1A0008 /* 0x1A0008 + (256 * Chn) */
+#define SRC_CA              0x1A0010 /* 0x1A0010 + (256 * Chn) */
+#define SRC_CF              0x1A0014 /* 0x1A0014 + (256 * Chn) */
+#define SRC_SA              0x1A0018 /* 0x1A0018 + (256 * Chn) */
+#define SRC_LA              0x1A001C /* 0x1A001C + (256 * Chn) */
+#define SRC_CTLSWR	    0x1A0020 /* 0x1A0020 + (256 * Chn) */
+#define SRC_CD		    0x1A0080 /* 0x1A0080 + (256 * Chn) + (4 * Regn) */
+#define SRC_MCTL		0x1A012C
+#define SRC_IP			0x1A102C /* 0x1A102C + (256 * Regn) */
+#define SRC_ENB			0x1A282C /* 0x1A282C + (256 * Regn) */
+#define SRC_ENBSTAT		0x1A202C
+#define SRC_ENBSA		0x1A232C
+#define SRC_DN0Z		0x1A0030
+#define SRC_DN1Z		0x1A0040
+#define SRC_UPZ			0x1A0060
+
+/* GPIO Registers */
+#define GPIO_DATA           0x1B7020
+#define GPIO_CTRL           0x1B7024
+
+/* Virtual memory registers */
+#define VMEM_PTPAL          0x1C6300 /* 0x1C6300 + (16 * Chn) */
+#define VMEM_PTPAH          0x1C6304 /* 0x1C6304 + (16 * Chn) */
+#define VMEM_CTL            0x1C7000
+
+/* Transport Registers */
+#define TRANSPORT_ENB       0x1B6000
+#define TRANSPORT_CTL       0x1B6004
+#define TRANSPORT_INT       0x1B6008
+
+/* Audio IO */
+#define AUDIO_IO_AIM        0x1B5000 /* 0x1B5000 + (0x04 * Chn) */
+#define AUDIO_IO_TX_CTL     0x1B5400 /* 0x1B5400 + (0x40 * Chn) */
+#define AUDIO_IO_TX_CSTAT_L 0x1B5408 /* 0x1B5408 + (0x40 * Chn) */
+#define AUDIO_IO_TX_CSTAT_H 0x1B540C /* 0x1B540C + (0x40 * Chn) */
+#define AUDIO_IO_RX_CTL     0x1B5410 /* 0x1B5410 + (0x40 * Chn) */
+#define AUDIO_IO_RX_SRT_CTL 0x1B5420 /* 0x1B5420 + (0x40 * Chn) */
+#define AUDIO_IO_MCLK       0x1B5600
+#define AUDIO_IO_TX_BLRCLK  0x1B5604
+#define AUDIO_IO_RX_BLRCLK  0x1B5608
+
+/* Mixer */
+#define MIXER_AMOPLO		0x130000 /* 0x130000 + (8 * Chn) [4095 : 0] */
+#define MIXER_AMOPHI		0x130004 /* 0x130004 + (8 * Chn) [4095 : 0] */
+#define MIXER_PRING_LO_HI	0x188000 /* 0x188000 + (4 * Chn) [4095 : 0] */
+#define MIXER_PMOPLO		0x138000 /* 0x138000 + (8 * Chn) [4095 : 0] */
+#define MIXER_PMOPHI		0x138004 /* 0x138004 + (8 * Chn) [4095 : 0] */
+#define MIXER_AR_ENABLE		0x19000C
+
+#endif
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
new file mode 100644
index 00000000000..a1db51b3ead
--- /dev/null
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -0,0 +1,488 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctamixer.c
+ *
+ * @Brief
+ * This file contains the implementation of the Audio Mixer
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 21 2008
+ *
+ */
+
+#include "ctamixer.h"
+#include "cthardware.h"
+#include <linux/slab.h>
+
+#define AMIXER_RESOURCE_NUM	256
+#define SUM_RESOURCE_NUM	256
+
+#define AMIXER_Y_IMMEDIATE	1
+
+#define BLANK_SLOT		4094
+
+static int amixer_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
+}
+
+static int amixer_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
+}
+
+static int amixer_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
+}
+
+static int amixer_output_slot(const struct rsc *rsc)
+{
+	return (amixer_index(rsc) << 4) + 0x4;
+}
+
+static struct rsc_ops amixer_basic_rsc_ops = {
+	.master		= amixer_master,
+	.next_conj	= amixer_next_conj,
+	.index		= amixer_index,
+	.output_slot	= amixer_output_slot,
+};
+
+static int amixer_set_input(struct amixer *amixer, struct rsc *rsc)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_mode(amixer->rsc.ctrl_blk, AMIXER_Y_IMMEDIATE);
+	amixer->input = rsc;
+	if (NULL == rsc)
+		hw->amixer_set_x(amixer->rsc.ctrl_blk, BLANK_SLOT);
+	else
+		hw->amixer_set_x(amixer->rsc.ctrl_blk,
+					rsc->ops->output_slot(rsc));
+
+	return 0;
+}
+
+/* y is a 14-bit immediate constant */
+static int amixer_set_y(struct amixer *amixer, unsigned int y)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_y(amixer->rsc.ctrl_blk, y);
+
+	return 0;
+}
+
+static int amixer_set_invalid_squash(struct amixer *amixer, unsigned int iv)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_iv(amixer->rsc.ctrl_blk, iv);
+
+	return 0;
+}
+
+static int amixer_set_sum(struct amixer *amixer, struct sum *sum)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	amixer->sum = sum;
+	if (NULL == sum) {
+		hw->amixer_set_se(amixer->rsc.ctrl_blk, 0);
+	} else {
+		hw->amixer_set_se(amixer->rsc.ctrl_blk, 1);
+		hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
+					sum->rsc.ops->index(&sum->rsc));
+	}
+
+	return 0;
+}
+
+static int amixer_commit_write(struct amixer *amixer)
+{
+	struct hw *hw;
+	unsigned int index;
+	int i;
+	struct rsc *input;
+	struct sum *sum;
+
+	hw = amixer->rsc.hw;
+	input = amixer->input;
+	sum = amixer->sum;
+
+	/* Program master and conjugate resources */
+	amixer->rsc.ops->master(&amixer->rsc);
+	if (NULL != input)
+		input->ops->master(input);
+
+	if (NULL != sum)
+		sum->rsc.ops->master(&sum->rsc);
+
+	for (i = 0; i < amixer->rsc.msr; i++) {
+		hw->amixer_set_dirty_all(amixer->rsc.ctrl_blk);
+		if (NULL != input) {
+			hw->amixer_set_x(amixer->rsc.ctrl_blk,
+						input->ops->output_slot(input));
+			input->ops->next_conj(input);
+		}
+		if (NULL != sum) {
+			hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
+						sum->rsc.ops->index(&sum->rsc));
+			sum->rsc.ops->next_conj(&sum->rsc);
+		}
+		index = amixer->rsc.ops->output_slot(&amixer->rsc);
+		hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk);
+		amixer->rsc.ops->next_conj(&amixer->rsc);
+	}
+	amixer->rsc.ops->master(&amixer->rsc);
+	if (NULL != input)
+		input->ops->master(input);
+
+	if (NULL != sum)
+		sum->rsc.ops->master(&sum->rsc);
+
+	return 0;
+}
+
+static int amixer_commit_raw_write(struct amixer *amixer)
+{
+	struct hw *hw;
+	unsigned int index;
+
+	hw = amixer->rsc.hw;
+	index = amixer->rsc.ops->output_slot(&amixer->rsc);
+	hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk);
+
+	return 0;
+}
+
+static int amixer_get_y(struct amixer *amixer)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	return hw->amixer_get_y(amixer->rsc.ctrl_blk);
+}
+
+static int amixer_setup(struct amixer *amixer, struct rsc *input,
+			unsigned int scale, struct sum *sum)
+{
+	amixer_set_input(amixer, input);
+	amixer_set_y(amixer, scale);
+	amixer_set_sum(amixer, sum);
+	amixer_commit_write(amixer);
+	return 0;
+}
+
+static struct amixer_rsc_ops amixer_ops = {
+	.set_input		= amixer_set_input,
+	.set_invalid_squash	= amixer_set_invalid_squash,
+	.set_scale		= amixer_set_y,
+	.set_sum		= amixer_set_sum,
+	.commit_write		= amixer_commit_write,
+	.commit_raw_write	= amixer_commit_raw_write,
+	.setup			= amixer_setup,
+	.get_scale		= amixer_get_y,
+};
+
+static int amixer_rsc_init(struct amixer *amixer,
+			   const struct amixer_desc *desc,
+			   struct amixer_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&amixer->rsc, amixer->idx[0],
+			AMIXER, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	/* Set amixer specific operations */
+	amixer->rsc.ops = &amixer_basic_rsc_ops;
+	amixer->ops = &amixer_ops;
+	amixer->input = NULL;
+	amixer->sum = NULL;
+
+	amixer_setup(amixer, NULL, 0, NULL);
+
+	return 0;
+}
+
+static int amixer_rsc_uninit(struct amixer *amixer)
+{
+	amixer_setup(amixer, NULL, 0, NULL);
+	rsc_uninit(&amixer->rsc);
+	amixer->ops = NULL;
+	amixer->input = NULL;
+	amixer->sum = NULL;
+	return 0;
+}
+
+static int get_amixer_rsc(struct amixer_mgr *mgr,
+			  const struct amixer_desc *desc,
+			  struct amixer **ramixer)
+{
+	int err, i;
+	unsigned int idx;
+	struct amixer *amixer;
+	unsigned long flags;
+
+	*ramixer = NULL;
+
+	/* Allocate mem for amixer resource */
+	amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
+	if (NULL == amixer) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient
+	 * amixer resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		amixer->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet AMIXER resource request!\n");
+		goto error;
+	}
+
+	err = amixer_rsc_init(amixer, desc, mgr);
+	if (err)
+		goto error;
+
+	*ramixer = amixer;
+
+	return 0;
+
+error:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(amixer);
+	return err;
+}
+
+static int put_amixer_rsc(struct amixer_mgr *mgr, struct amixer *amixer)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < amixer->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	amixer_rsc_uninit(amixer);
+	kfree(amixer);
+
+	return 0;
+}
+
+int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr)
+{
+	int err;
+	struct amixer_mgr *amixer_mgr;
+
+	*ramixer_mgr = NULL;
+	amixer_mgr = kzalloc(sizeof(*amixer_mgr), GFP_KERNEL);
+	if (NULL == amixer_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&amixer_mgr->mgr, AMIXER, AMIXER_RESOURCE_NUM, hw);
+	if (err)
+		goto error;
+
+	spin_lock_init(&amixer_mgr->mgr_lock);
+
+	amixer_mgr->get_amixer = get_amixer_rsc;
+	amixer_mgr->put_amixer = put_amixer_rsc;
+
+	*ramixer_mgr = amixer_mgr;
+
+	return 0;
+
+error:
+	kfree(amixer_mgr);
+	return err;
+}
+
+int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr)
+{
+	rsc_mgr_uninit(&amixer_mgr->mgr);
+	kfree(amixer_mgr);
+	return 0;
+}
+
+/* SUM resource management */
+
+static int sum_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
+}
+
+static int sum_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
+}
+
+static int sum_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
+}
+
+static int sum_output_slot(const struct rsc *rsc)
+{
+	return (sum_index(rsc) << 4) + 0xc;
+}
+
+static struct rsc_ops sum_basic_rsc_ops = {
+	.master		= sum_master,
+	.next_conj	= sum_next_conj,
+	.index		= sum_index,
+	.output_slot	= sum_output_slot,
+};
+
+static int sum_rsc_init(struct sum *sum,
+			const struct sum_desc *desc,
+			struct sum_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&sum->rsc, sum->idx[0], SUM, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	sum->rsc.ops = &sum_basic_rsc_ops;
+
+	return 0;
+}
+
+static int sum_rsc_uninit(struct sum *sum)
+{
+	rsc_uninit(&sum->rsc);
+	return 0;
+}
+
+static int get_sum_rsc(struct sum_mgr *mgr,
+		       const struct sum_desc *desc,
+		       struct sum **rsum)
+{
+	int err, i;
+	unsigned int idx;
+	struct sum *sum;
+	unsigned long flags;
+
+	*rsum = NULL;
+
+	/* Allocate mem for sum resource */
+	sum = kzalloc(sizeof(*sum), GFP_KERNEL);
+	if (NULL == sum) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient sum resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		sum->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SUM resource request!\n");
+		goto error;
+	}
+
+	err = sum_rsc_init(sum, desc, mgr);
+	if (err)
+		goto error;
+
+	*rsum = sum;
+
+	return 0;
+
+error:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, sum->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(sum);
+	return err;
+}
+
+static int put_sum_rsc(struct sum_mgr *mgr, struct sum *sum)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < sum->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, sum->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	sum_rsc_uninit(sum);
+	kfree(sum);
+
+	return 0;
+}
+
+int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr)
+{
+	int err;
+	struct sum_mgr *sum_mgr;
+
+	*rsum_mgr = NULL;
+	sum_mgr = kzalloc(sizeof(*sum_mgr), GFP_KERNEL);
+	if (NULL == sum_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&sum_mgr->mgr, SUM, SUM_RESOURCE_NUM, hw);
+	if (err)
+		goto error;
+
+	spin_lock_init(&sum_mgr->mgr_lock);
+
+	sum_mgr->get_sum = get_sum_rsc;
+	sum_mgr->put_sum = put_sum_rsc;
+
+	*rsum_mgr = sum_mgr;
+
+	return 0;
+
+error:
+	kfree(sum_mgr);
+	return err;
+}
+
+int sum_mgr_destroy(struct sum_mgr *sum_mgr)
+{
+	rsc_mgr_uninit(&sum_mgr->mgr);
+	kfree(sum_mgr);
+	return 0;
+}
+
diff --git a/sound/pci/ctxfi/ctamixer.h b/sound/pci/ctxfi/ctamixer.h
new file mode 100644
index 00000000000..cc49e5ab475
--- /dev/null
+++ b/sound/pci/ctxfi/ctamixer.h
@@ -0,0 +1,96 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctamixer.h
+ *
+ * @Brief
+ * This file contains the definition of the Audio Mixer
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 21 2008
+ *
+ */
+
+#ifndef CTAMIXER_H
+#define CTAMIXER_H
+
+#include "ctresource.h"
+#include <linux/spinlock.h>
+
+/* Define the descriptor of a summation node resource */
+struct sum {
+	struct rsc rsc;		/* Basic resource info */
+	unsigned char idx[8];
+};
+
+/* Define sum resource request description info */
+struct sum_desc {
+	unsigned int msr;
+};
+
+struct sum_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request one sum resource */
+	int (*get_sum)(struct sum_mgr *mgr,
+			const struct sum_desc *desc, struct sum **rsum);
+	/* return one sum resource */
+	int (*put_sum)(struct sum_mgr *mgr, struct sum *sum);
+};
+
+/* Constructor and destructor of daio resource manager */
+int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr);
+int sum_mgr_destroy(struct sum_mgr *sum_mgr);
+
+/* Define the descriptor of a amixer resource */
+struct amixer_rsc_ops;
+
+struct amixer {
+	struct rsc rsc;		/* Basic resource info */
+	unsigned char idx[8];
+	struct rsc *input;	/* pointer to a resource acting as source */
+	struct sum *sum;	/* Put amixer output to this summation node */
+	struct amixer_rsc_ops *ops;	/* AMixer specific operations */
+};
+
+struct amixer_rsc_ops {
+	int (*set_input)(struct amixer *amixer, struct rsc *rsc);
+	int (*set_scale)(struct amixer *amixer, unsigned int scale);
+	int (*set_invalid_squash)(struct amixer *amixer, unsigned int iv);
+	int (*set_sum)(struct amixer *amixer, struct sum *sum);
+	int (*commit_write)(struct amixer *amixer);
+	/* Only for interleaved recording */
+	int (*commit_raw_write)(struct amixer *amixer);
+	int (*setup)(struct amixer *amixer, struct rsc *input,
+			unsigned int scale, struct sum *sum);
+	int (*get_scale)(struct amixer *amixer);
+};
+
+/* Define amixer resource request description info */
+struct amixer_desc {
+	unsigned int msr;
+};
+
+struct amixer_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request one amixer resource */
+	int (*get_amixer)(struct amixer_mgr *mgr,
+			  const struct amixer_desc *desc,
+			  struct amixer **ramixer);
+	/* return one amixer resource */
+	int (*put_amixer)(struct amixer_mgr *mgr, struct amixer *amixer);
+};
+
+/* Constructor and destructor of amixer resource manager */
+int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr);
+int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr);
+
+#endif /* CTAMIXER_H */
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
new file mode 100644
index 00000000000..b0adc809400
--- /dev/null
+++ b/sound/pci/ctxfi/ctatc.c
@@ -0,0 +1,1615 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctatc.c
+ *
+ * @Brief
+ * This file contains the implementation of the device resource management
+ * object.
+ *
+ * @Author Liu Chun
+ * @Date Mar 28 2008
+ */
+
+#include "ctatc.h"
+#include "ctpcm.h"
+#include "ctmixer.h"
+#include "cthardware.h"
+#include "ctsrc.h"
+#include "ctamixer.h"
+#include "ctdaio.h"
+#include "cttimer.h"
+#include <linux/delay.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+#include <sound/asoundef.h>
+
+#define MONO_SUM_SCALE	0x19a8	/* 2^(-0.5) in 14-bit floating format */
+#define DAIONUM		7
+#define MAX_MULTI_CHN	8
+
+#define IEC958_DEFAULT_CON ((IEC958_AES0_NONAUDIO \
+			    | IEC958_AES0_CON_NOT_COPYRIGHT) \
+			    | ((IEC958_AES1_CON_MIXER \
+			    | IEC958_AES1_CON_ORIGINAL) << 8) \
+			    | (0x10 << 16) \
+			    | ((IEC958_AES3_CON_FS_48000) << 24))
+
+static struct snd_pci_quirk __devinitdata subsys_20k1_list[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0022, "SB055x", CTSB055X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x002f, "SB055x", CTSB055X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0029, "SB073x", CTSB073X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0031, "SB073x", CTSB073X),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, 0x6000,
+			   "UAA", CTUAA),
+	SND_PCI_QUIRK_VENDOR(PCI_VENDOR_ID_CREATIVE,
+			     "Unknown", CT20K1_UNKNOWN),
+	{ } /* terminator */
+};
+
+static struct snd_pci_quirk __devinitdata subsys_20k2_list[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB0760,
+		      "SB0760", CTSB0760),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08801,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08802,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08803,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000,
+			   PCI_SUBDEVICE_ID_CREATIVE_HENDRIX, "HENDRIX",
+			   CTHENDRIX),
+	{ } /* terminator */
+};
+
+static const char *ct_subsys_name[NUM_CTCARDS] = {
+	[CTSB055X]	= "SB055x",
+	[CTSB073X]	= "SB073x",
+	[CTSB0760]	= "SB076x",
+	[CTUAA]		= "UAA",
+	[CT20K1_UNKNOWN] = "Unknown",
+	[CTHENDRIX]	= "Hendrix",
+	[CTSB0880]	= "SB0880",
+};
+
+static struct {
+	int (*create)(struct ct_atc *atc,
+			enum CTALSADEVS device, const char *device_name);
+	int (*destroy)(void *alsa_dev);
+	const char *public_name;
+} alsa_dev_funcs[NUM_CTALSADEVS] = {
+	[FRONT]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Front/WaveIn"},
+	[SURROUND]	= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Surround"},
+	[CLFE]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Center/LFE"},
+	[SIDE]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Side"},
+	[IEC958]	= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "IEC958 Non-audio"},
+
+	[MIXER]		= { .create = ct_alsa_mix_create,
+			    .destroy = NULL,
+			    .public_name = "Mixer"}
+};
+
+typedef int (*create_t)(void *, void **);
+typedef int (*destroy_t)(void *);
+
+static struct {
+	int (*create)(void *hw, void **rmgr);
+	int (*destroy)(void *mgr);
+} rsc_mgr_funcs[NUM_RSCTYP] = {
+	[SRC] 		= { .create 	= (create_t)src_mgr_create,
+			    .destroy 	= (destroy_t)src_mgr_destroy	},
+	[SRCIMP] 	= { .create 	= (create_t)srcimp_mgr_create,
+			    .destroy 	= (destroy_t)srcimp_mgr_destroy	},
+	[AMIXER]	= { .create	= (create_t)amixer_mgr_create,
+			    .destroy	= (destroy_t)amixer_mgr_destroy	},
+	[SUM]		= { .create	= (create_t)sum_mgr_create,
+			    .destroy	= (destroy_t)sum_mgr_destroy	},
+	[DAIO]		= { .create	= (create_t)daio_mgr_create,
+			    .destroy	= (destroy_t)daio_mgr_destroy	}
+};
+
+static int
+atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+
+/* *
+ * Only mono and interleaved modes are supported now.
+ * Always allocates a contiguous channel block.
+ * */
+
+static int ct_map_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct snd_pcm_runtime *runtime;
+	struct ct_vm *vm;
+
+	if (NULL == apcm->substream)
+		return 0;
+
+	runtime = apcm->substream->runtime;
+	vm = atc->vm;
+
+	apcm->vm_block = vm->map(vm, apcm->substream, runtime->dma_bytes);
+
+	if (NULL == apcm->vm_block)
+		return -ENOENT;
+
+	return 0;
+}
+
+static void ct_unmap_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct ct_vm *vm;
+
+	if (NULL == apcm->vm_block)
+		return;
+
+	vm = atc->vm;
+
+	vm->unmap(vm, apcm->vm_block);
+
+	apcm->vm_block = NULL;
+}
+
+static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index)
+{
+	struct ct_vm *vm;
+	void *kvirt_addr;
+	unsigned long phys_addr;
+
+	vm = atc->vm;
+	kvirt_addr = vm->get_ptp_virt(vm, index);
+	if (kvirt_addr == NULL)
+		phys_addr = (~0UL);
+	else
+		phys_addr = virt_to_phys(kvirt_addr);
+
+	return phys_addr;
+}
+
+static unsigned int convert_format(snd_pcm_format_t snd_format)
+{
+	switch (snd_format) {
+	case SNDRV_PCM_FORMAT_U8:
+		return SRC_SF_U8;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		return SRC_SF_S16;
+	case SNDRV_PCM_FORMAT_S24_3LE:
+		return SRC_SF_S24;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		return SRC_SF_S32;
+	case SNDRV_PCM_FORMAT_FLOAT_LE:
+		return SRC_SF_F32;
+	default:
+		printk(KERN_ERR "ctxfi: not recognized snd format is %d \n",
+			snd_format);
+		return SRC_SF_S16;
+	}
+}
+
+static unsigned int
+atc_get_pitch(unsigned int input_rate, unsigned int output_rate)
+{
+	unsigned int pitch;
+	int b;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = (input_rate / output_rate) << 24;
+	input_rate %= output_rate;
+	input_rate /= 100;
+	output_rate /= 100;
+	for (b = 31; ((b >= 0) && !(input_rate >> b)); )
+		b--;
+
+	if (b >= 0) {
+		input_rate <<= (31 - b);
+		input_rate /= output_rate;
+		b = 24 - (31 - b);
+		if (b >= 0)
+			input_rate <<= b;
+		else
+			input_rate >>= -b;
+
+		pitch |= input_rate;
+	}
+
+	return pitch;
+}
+
+static int select_rom(unsigned int pitch)
+{
+	if ((pitch > 0x00428f5c) && (pitch < 0x01b851ec)) {
+		/* 0.26 <= pitch <= 1.72 */
+		return 1;
+	} else if ((0x01d66666 == pitch) || (0x01d66667 == pitch)) {
+		/* pitch == 1.8375 */
+		return 2;
+	} else if (0x02000000 == pitch) {
+		/* pitch == 2 */
+		return 3;
+	} else if ((pitch >= 0x0) && (pitch <= 0x08000000)) {
+		/* 0 <= pitch <= 8 */
+		return 0;
+	} else {
+		return -ENOENT;
+	}
+}
+
+static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct src_desc desc = {0};
+	struct amixer_desc mix_dsc = {0};
+	struct src *src;
+	struct amixer *amixer;
+	int err;
+	int n_amixer = apcm->substream->runtime->channels, i = 0;
+	int device = apcm->substream->pcm->device;
+	unsigned int pitch;
+
+	if (NULL != apcm->src) {
+		/* Prepared pcm playback */
+		return 0;
+	}
+
+	/* first release old resources */
+	atc->pcm_release_resources(atc, apcm);
+
+	/* Get SRC resource */
+	desc.multi = apcm->substream->runtime->channels;
+	desc.msr = atc->msr;
+	desc.mode = MEMRD;
+	err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch(apcm->substream->runtime->rate,
+						(atc->rsr * atc->msr));
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+	src->ops->set_rom(src, select_rom(pitch));
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL));
+
+	/* Get AMIXER resource */
+	n_amixer = (n_amixer < 2) ? 2 : n_amixer;
+	apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+	if (NULL == apcm->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mix_dsc.msr = atc->msr;
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	/* Connect resources */
+	src = apcm->src;
+	for (i = 0; i < n_amixer; i++) {
+		amixer = apcm->amixers[i];
+		mutex_lock(&atc->atc_mutex);
+		amixer->ops->setup(amixer, &src->rsc,
+					INIT_VOL, atc->pcm[i+device*2]);
+		mutex_unlock(&atc->atc_mutex);
+		src = src->ops->next_interleave(src);
+		if (NULL == src)
+			src = apcm->src;
+	}
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int
+atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM];
+	struct srcimp *srcimp;
+	int i;
+
+	if (NULL != apcm->srcimps) {
+		for (i = 0; i < apcm->n_srcimp; i++) {
+			srcimp = apcm->srcimps[i];
+			srcimp->ops->unmap(srcimp);
+			srcimp_mgr->put_srcimp(srcimp_mgr, srcimp);
+			apcm->srcimps[i] = NULL;
+		}
+		kfree(apcm->srcimps);
+		apcm->srcimps = NULL;
+	}
+
+	if (NULL != apcm->srccs) {
+		for (i = 0; i < apcm->n_srcc; i++) {
+			src_mgr->put_src(src_mgr, apcm->srccs[i]);
+			apcm->srccs[i] = NULL;
+		}
+		kfree(apcm->srccs);
+		apcm->srccs = NULL;
+	}
+
+	if (NULL != apcm->amixers) {
+		for (i = 0; i < apcm->n_amixer; i++) {
+			amixer_mgr->put_amixer(amixer_mgr, apcm->amixers[i]);
+			apcm->amixers[i] = NULL;
+		}
+		kfree(apcm->amixers);
+		apcm->amixers = NULL;
+	}
+
+	if (NULL != apcm->mono) {
+		sum_mgr->put_sum(sum_mgr, apcm->mono);
+		apcm->mono = NULL;
+	}
+
+	if (NULL != apcm->src) {
+		src_mgr->put_src(src_mgr, apcm->src);
+		apcm->src = NULL;
+	}
+
+	if (NULL != apcm->vm_block) {
+		/* Undo device virtual mem map */
+		ct_unmap_audio_buffer(atc, apcm);
+		apcm->vm_block = NULL;
+	}
+
+	return 0;
+}
+
+static int atc_pcm_playback_start(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	unsigned int max_cisz;
+	struct src *src = apcm->src;
+
+	if (apcm->started)
+		return 0;
+	apcm->started = 1;
+
+	max_cisz = src->multi * src->rsc.msr;
+	max_cisz = 0x80 * (max_cisz < 8 ? max_cisz : 8);
+
+	src->ops->set_sa(src, apcm->vm_block->addr);
+	src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size);
+	src->ops->set_ca(src, apcm->vm_block->addr + max_cisz);
+	src->ops->set_cisz(src, max_cisz);
+
+	src->ops->set_bm(src, 1);
+	src->ops->set_state(src, SRC_STATE_INIT);
+	src->ops->commit_write(src);
+
+	ct_timer_start(apcm->timer);
+	return 0;
+}
+
+static int atc_pcm_stop(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	int i;
+
+	ct_timer_stop(apcm->timer);
+
+	src = apcm->src;
+	src->ops->set_bm(src, 0);
+	src->ops->set_state(src, SRC_STATE_OFF);
+	src->ops->commit_write(src);
+
+	if (NULL != apcm->srccs) {
+		for (i = 0; i < apcm->n_srcc; i++) {
+			src = apcm->srccs[i];
+			src->ops->set_bm(src, 0);
+			src->ops->set_state(src, SRC_STATE_OFF);
+			src->ops->commit_write(src);
+		}
+	}
+
+	apcm->started = 0;
+
+	return 0;
+}
+
+static int
+atc_pcm_playback_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src = apcm->src;
+	u32 size, max_cisz;
+	int position;
+
+	if (!src)
+		return 0;
+	position = src->ops->get_ca(src);
+
+	size = apcm->vm_block->size;
+	max_cisz = src->multi * src->rsc.msr;
+	max_cisz = 128 * (max_cisz < 8 ? max_cisz : 8);
+
+	return (position + size - max_cisz - apcm->vm_block->addr) % size;
+}
+
+struct src_node_conf_t {
+	unsigned int pitch;
+	unsigned int msr:8;
+	unsigned int mix_msr:8;
+	unsigned int imp_msr:8;
+	unsigned int vo:1;
+};
+
+static void setup_src_node_conf(struct ct_atc *atc, struct ct_atc_pcm *apcm,
+				struct src_node_conf_t *conf, int *n_srcc)
+{
+	unsigned int pitch;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+	*n_srcc = 0;
+
+	if (1 == atc->msr) {
+		*n_srcc = apcm->substream->runtime->channels;
+		conf[0].pitch = pitch;
+		conf[0].mix_msr = conf[0].imp_msr = conf[0].msr = 1;
+		conf[0].vo = 1;
+	} else if (2 == atc->msr) {
+		if (0x8000000 < pitch) {
+			/* Need two-stage SRCs, SRCIMPs and
+			 * AMIXERs for converting format */
+			conf[0].pitch = (atc->msr << 24);
+			conf[0].msr = conf[0].mix_msr = 1;
+			conf[0].imp_msr = atc->msr;
+			conf[0].vo = 0;
+			conf[1].pitch = atc_get_pitch(atc->rsr,
+					apcm->substream->runtime->rate);
+			conf[1].msr = conf[1].mix_msr = conf[1].imp_msr = 1;
+			conf[1].vo = 1;
+			*n_srcc = apcm->substream->runtime->channels * 2;
+		} else if (0x1000000 < pitch) {
+			/* Need one-stage SRCs, SRCIMPs and
+			 * AMIXERs for converting format */
+			conf[0].pitch = pitch;
+			conf[0].msr = conf[0].mix_msr
+				    = conf[0].imp_msr = atc->msr;
+			conf[0].vo = 1;
+			*n_srcc = apcm->substream->runtime->channels;
+		}
+	}
+}
+
+static int
+atc_pcm_capture_get_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM];
+	struct src_desc src_dsc = {0};
+	struct src *src;
+	struct srcimp_desc srcimp_dsc = {0};
+	struct srcimp *srcimp;
+	struct amixer_desc mix_dsc = {0};
+	struct sum_desc sum_dsc = {0};
+	unsigned int pitch;
+	int multi, err, i;
+	int n_srcimp, n_amixer, n_srcc, n_sum;
+	struct src_node_conf_t src_node_conf[2] = {{0} };
+
+	/* first release old resources */
+	atc_pcm_release_resources(atc, apcm);
+
+	/* The numbers of converting SRCs and SRCIMPs should be determined
+	 * by pitch value. */
+
+	multi = apcm->substream->runtime->channels;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+
+	setup_src_node_conf(atc, apcm, src_node_conf, &n_srcc);
+	n_sum = (1 == multi) ? 1 : 0;
+	n_amixer = n_sum * 2 + n_srcc;
+	n_srcimp = n_srcc;
+	if ((multi > 1) && (0x8000000 >= pitch)) {
+		/* Need extra AMIXERs and SRCIMPs for special treatment
+		 * of interleaved recording of conjugate channels */
+		n_amixer += multi * atc->msr;
+		n_srcimp += multi * atc->msr;
+	} else {
+		n_srcimp += multi;
+	}
+
+	if (n_srcc) {
+		apcm->srccs = kzalloc(sizeof(void *)*n_srcc, GFP_KERNEL);
+		if (NULL == apcm->srccs)
+			return -ENOMEM;
+	}
+	if (n_amixer) {
+		apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+		if (NULL == apcm->amixers) {
+			err = -ENOMEM;
+			goto error1;
+		}
+	}
+	apcm->srcimps = kzalloc(sizeof(void *)*n_srcimp, GFP_KERNEL);
+	if (NULL == apcm->srcimps) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	/* Allocate SRCs for sample rate conversion if needed */
+	src_dsc.multi = 1;
+	src_dsc.mode = ARCRW;
+	for (i = 0, apcm->n_srcc = 0; i < n_srcc; i++) {
+		src_dsc.msr = src_node_conf[i/multi].msr;
+		err = src_mgr->get_src(src_mgr, &src_dsc,
+					(struct src **)&apcm->srccs[i]);
+		if (err)
+			goto error1;
+
+		src = apcm->srccs[i];
+		pitch = src_node_conf[i/multi].pitch;
+		src->ops->set_pitch(src, pitch);
+		src->ops->set_rom(src, select_rom(pitch));
+		src->ops->set_vo(src, src_node_conf[i/multi].vo);
+
+		apcm->n_srcc++;
+	}
+
+	/* Allocate AMIXERs for routing SRCs of conversion if needed */
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		if (i < (n_sum*2))
+			mix_dsc.msr = atc->msr;
+		else if (i < (n_sum*2+n_srcc))
+			mix_dsc.msr = src_node_conf[(i-n_sum*2)/multi].mix_msr;
+		else
+			mix_dsc.msr = 1;
+
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Allocate a SUM resource to mix all input channels together */
+	sum_dsc.msr = atc->msr;
+	err = sum_mgr->get_sum(sum_mgr, &sum_dsc, (struct sum **)&apcm->mono);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+	/* Allocate SRCIMP resources */
+	for (i = 0, apcm->n_srcimp = 0; i < n_srcimp; i++) {
+		if (i < (n_srcc))
+			srcimp_dsc.msr = src_node_conf[i/multi].imp_msr;
+		else if (1 == multi)
+			srcimp_dsc.msr = (pitch <= 0x8000000) ? atc->msr : 1;
+		else
+			srcimp_dsc.msr = 1;
+
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc, &srcimp);
+		if (err)
+			goto error1;
+
+		apcm->srcimps[i] = srcimp;
+		apcm->n_srcimp++;
+	}
+
+	/* Allocate a SRC for writing data to host memory */
+	src_dsc.multi = apcm->substream->runtime->channels;
+	src_dsc.msr = 1;
+	src_dsc.mode = MEMWR;
+	err = src_mgr->get_src(src_mgr, &src_dsc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int atc_pcm_capture_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct amixer *amixer;
+	struct srcimp *srcimp;
+	struct ct_mixer *mixer = atc->mixer;
+	struct sum *mono;
+	struct rsc *out_ports[8] = {NULL};
+	int err, i, j, n_sum, multi;
+	unsigned int pitch;
+	int mix_base = 0, imp_base = 0;
+
+	if (NULL != apcm->src) {
+		/* Prepared pcm capture */
+		return 0;
+	}
+
+	/* Get needed resources. */
+	err = atc_pcm_capture_get_resources(atc, apcm);
+	if (err)
+		return err;
+
+	/* Connect resources */
+	mixer->get_output_ports(mixer, MIX_PCMO_FRONT,
+				&out_ports[0], &out_ports[1]);
+
+	multi = apcm->substream->runtime->channels;
+	if (1 == multi) {
+		mono = apcm->mono;
+		for (i = 0; i < 2; i++) {
+			amixer = apcm->amixers[i];
+			amixer->ops->setup(amixer, out_ports[i],
+						MONO_SUM_SCALE, mono);
+		}
+		out_ports[0] = &mono->rsc;
+		n_sum = 1;
+		mix_base = n_sum * 2;
+	}
+
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		srcimp = apcm->srcimps[imp_base+i];
+		amixer = apcm->amixers[mix_base+i];
+		srcimp->ops->map(srcimp, src, out_ports[i%multi]);
+		amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
+		out_ports[i%multi] = &amixer->rsc;
+	}
+
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+
+	if ((multi > 1) && (pitch <= 0x8000000)) {
+		/* Special connection for interleaved
+		 * recording with conjugate channels */
+		for (i = 0; i < multi; i++) {
+			out_ports[i]->ops->master(out_ports[i]);
+			for (j = 0; j < atc->msr; j++) {
+				amixer = apcm->amixers[apcm->n_srcc+j*multi+i];
+				amixer->ops->set_input(amixer, out_ports[i]);
+				amixer->ops->set_scale(amixer, INIT_VOL);
+				amixer->ops->set_sum(amixer, NULL);
+				amixer->ops->commit_raw_write(amixer);
+				out_ports[i]->ops->next_conj(out_ports[i]);
+
+				srcimp = apcm->srcimps[apcm->n_srcc+j*multi+i];
+				srcimp->ops->map(srcimp, apcm->src,
+							&amixer->rsc);
+			}
+		}
+	} else {
+		for (i = 0; i < multi; i++) {
+			srcimp = apcm->srcimps[apcm->n_srcc+i];
+			srcimp->ops->map(srcimp, apcm->src, out_ports[i]);
+		}
+	}
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+}
+
+static int atc_pcm_capture_start(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	int i, multi;
+
+	if (apcm->started)
+		return 0;
+
+	apcm->started = 1;
+	multi = apcm->substream->runtime->channels;
+	/* Set up converting SRCs */
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		src->ops->set_pm(src, ((i%multi) != (multi-1)));
+		src_mgr->src_disable(src_mgr, src);
+	}
+
+	/*  Set up recording SRC */
+	src = apcm->src;
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_sa(src, apcm->vm_block->addr);
+	src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size);
+	src->ops->set_ca(src, apcm->vm_block->addr);
+	src_mgr->src_disable(src_mgr, src);
+
+	/* Disable relevant SRCs firstly */
+	src_mgr->commit_write(src_mgr);
+
+	/* Enable SRCs respectively */
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		src->ops->set_state(src, SRC_STATE_RUN);
+		src->ops->commit_write(src);
+		src_mgr->src_enable_s(src_mgr, src);
+	}
+	src = apcm->src;
+	src->ops->set_bm(src, 1);
+	src->ops->set_state(src, SRC_STATE_RUN);
+	src->ops->commit_write(src);
+	src_mgr->src_enable_s(src_mgr, src);
+
+	/* Enable relevant SRCs synchronously */
+	src_mgr->commit_write(src_mgr);
+
+	ct_timer_start(apcm->timer);
+	return 0;
+}
+
+static int
+atc_pcm_capture_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src = apcm->src;
+
+	if (!src)
+		return 0;
+	return src->ops->get_ca(src) - apcm->vm_block->addr;
+}
+
+static int spdif_passthru_playback_get_resources(struct ct_atc *atc,
+						 struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct src_desc desc = {0};
+	struct amixer_desc mix_dsc = {0};
+	struct src *src;
+	int err;
+	int n_amixer = apcm->substream->runtime->channels, i;
+	unsigned int pitch, rsr = atc->pll_rate;
+
+	/* first release old resources */
+	atc_pcm_release_resources(atc, apcm);
+
+	/* Get SRC resource */
+	desc.multi = apcm->substream->runtime->channels;
+	desc.msr = 1;
+	while (apcm->substream->runtime->rate > (rsr * desc.msr))
+		desc.msr <<= 1;
+
+	desc.mode = MEMRD;
+	err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch(apcm->substream->runtime->rate, (rsr * desc.msr));
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+	src->ops->set_rom(src, select_rom(pitch));
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL));
+	src->ops->set_bp(src, 1);
+
+	/* Get AMIXER resource */
+	n_amixer = (n_amixer < 2) ? 2 : n_amixer;
+	apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+	if (NULL == apcm->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mix_dsc.msr = desc.msr;
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int atc_pll_init(struct ct_atc *atc, int rate)
+{
+	struct hw *hw = atc->hw;
+	int err;
+	err = hw->pll_init(hw, rate);
+	atc->pll_rate = err ? 0 : rate;
+	return err;
+}
+
+static int
+spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	unsigned int rate = apcm->substream->runtime->rate;
+	unsigned int status;
+	int err;
+	unsigned char iec958_con_fs;
+
+	switch (rate) {
+	case 48000:
+		iec958_con_fs = IEC958_AES3_CON_FS_48000;
+		break;
+	case 44100:
+		iec958_con_fs = IEC958_AES3_CON_FS_44100;
+		break;
+	case 32000:
+		iec958_con_fs = IEC958_AES3_CON_FS_32000;
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	mutex_lock(&atc->atc_mutex);
+	dao->ops->get_spos(dao, &status);
+	if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) {
+		status &= ((~IEC958_AES3_CON_FS) << 24);
+		status |= (iec958_con_fs << 24);
+		dao->ops->set_spos(dao, status);
+		dao->ops->commit_write(dao);
+	}
+	if ((rate != atc->pll_rate) && (32000 != rate))
+		err = atc_pll_init(atc, rate);
+	mutex_unlock(&atc->atc_mutex);
+
+	return err;
+}
+
+static int
+spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct amixer *amixer;
+	struct dao *dao;
+	int err;
+	int i;
+
+	if (NULL != apcm->src)
+		return 0;
+
+	/* Configure SPDIFOO and PLL to passthrough mode;
+	 * determine pll_rate. */
+	err = spdif_passthru_playback_setup(atc, apcm);
+	if (err)
+		return err;
+
+	/* Get needed resources. */
+	err = spdif_passthru_playback_get_resources(atc, apcm);
+	if (err)
+		return err;
+
+	/* Connect resources */
+	src = apcm->src;
+	for (i = 0; i < apcm->n_amixer; i++) {
+		amixer = apcm->amixers[i];
+		amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
+		src = src->ops->next_interleave(src);
+		if (NULL == src)
+			src = apcm->src;
+	}
+	/* Connect to SPDIFOO */
+	mutex_lock(&atc->atc_mutex);
+	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	amixer = apcm->amixers[0];
+	dao->ops->set_left_input(dao, &amixer->rsc);
+	amixer = apcm->amixers[1];
+	dao->ops->set_right_input(dao, &amixer->rsc);
+	mutex_unlock(&atc->atc_mutex);
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+}
+
+static int atc_select_line_in(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct ct_mixer *mixer = atc->mixer;
+	struct src *src;
+
+	if (hw->is_adc_source_selected(hw, ADC_LINEIN))
+		return 0;
+
+	mixer->set_input_left(mixer, MIX_MIC_IN, NULL);
+	mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
+
+	hw->select_adc_source(hw, ADC_LINEIN);
+
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc);
+
+	return 0;
+}
+
+static int atc_select_mic_in(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct ct_mixer *mixer = atc->mixer;
+	struct src *src;
+
+	if (hw->is_adc_source_selected(hw, ADC_MICIN))
+		return 0;
+
+	mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
+	mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
+
+	hw->select_adc_source(hw, ADC_MICIN);
+
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_MIC_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_MIC_IN, &src->rsc);
+
+	return 0;
+}
+
+static int atc_have_digit_io_switch(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+
+	return hw->have_digit_io_switch(hw);
+}
+
+static int atc_select_digit_io(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+
+	if (hw->is_adc_source_selected(hw, ADC_NONE))
+		return 0;
+
+	hw->select_adc_source(hw, ADC_NONE);
+
+	return 0;
+}
+
+static int atc_daio_unmute(struct ct_atc *atc, unsigned char state, int type)
+{
+	struct daio_mgr *daio_mgr = atc->rsc_mgrs[DAIO];
+
+	if (state)
+		daio_mgr->daio_enable(daio_mgr, atc->daios[type]);
+	else
+		daio_mgr->daio_disable(daio_mgr, atc->daios[type]);
+
+	daio_mgr->commit_write(daio_mgr);
+
+	return 0;
+}
+
+static int
+atc_dao_get_status(struct ct_atc *atc, unsigned int *status, int type)
+{
+	struct dao *dao = container_of(atc->daios[type], struct dao, daio);
+	return dao->ops->get_spos(dao, status);
+}
+
+static int
+atc_dao_set_status(struct ct_atc *atc, unsigned int status, int type)
+{
+	struct dao *dao = container_of(atc->daios[type], struct dao, daio);
+
+	dao->ops->set_spos(dao, status);
+	dao->ops->commit_write(dao);
+	return 0;
+}
+
+static int atc_line_front_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO1);
+}
+
+static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO4);
+}
+
+static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO3);
+}
+
+static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO2);
+}
+
+static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEIM);
+}
+
+static int atc_spdif_out_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, SPDIFOO);
+}
+
+static int atc_spdif_in_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, SPDIFIO);
+}
+
+static int atc_spdif_out_get_status(struct ct_atc *atc, unsigned int *status)
+{
+	return atc_dao_get_status(atc, status, SPDIFOO);
+}
+
+static int atc_spdif_out_set_status(struct ct_atc *atc, unsigned int status)
+{
+	return atc_dao_set_status(atc, status, SPDIFOO);
+}
+
+static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
+{
+	struct dao_desc da_dsc = {0};
+	struct dao *dao;
+	int err;
+	struct ct_mixer *mixer = atc->mixer;
+	struct rsc *rscs[2] = {NULL};
+	unsigned int spos = 0;
+
+	mutex_lock(&atc->atc_mutex);
+	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	da_dsc.msr = state ? 1 : atc->msr;
+	da_dsc.passthru = state ? 1 : 0;
+	err = dao->ops->reinit(dao, &da_dsc);
+	if (state) {
+		spos = IEC958_DEFAULT_CON;
+	} else {
+		mixer->get_output_ports(mixer, MIX_SPDIF_OUT,
+					&rscs[0], &rscs[1]);
+		dao->ops->set_left_input(dao, rscs[0]);
+		dao->ops->set_right_input(dao, rscs[1]);
+		/* Restore PLL to atc->rsr if needed. */
+		if (atc->pll_rate != atc->rsr)
+			err = atc_pll_init(atc, atc->rsr);
+	}
+	dao->ops->set_spos(dao, spos);
+	dao->ops->commit_write(dao);
+	mutex_unlock(&atc->atc_mutex);
+
+	return err;
+}
+
+static int ct_atc_destroy(struct ct_atc *atc)
+{
+	struct daio_mgr *daio_mgr;
+	struct dao *dao;
+	struct dai *dai;
+	struct daio *daio;
+	struct sum_mgr *sum_mgr;
+	struct src_mgr *src_mgr;
+	struct srcimp_mgr *srcimp_mgr;
+	struct srcimp *srcimp;
+	struct ct_mixer *mixer;
+	int i = 0;
+
+	if (NULL == atc)
+		return 0;
+
+	if (atc->timer) {
+		ct_timer_free(atc->timer);
+		atc->timer = NULL;
+	}
+
+	/* Stop hardware and disable all interrupts */
+	if (NULL != atc->hw)
+		((struct hw *)atc->hw)->card_stop(atc->hw);
+
+	/* Destroy internal mixer objects */
+	if (NULL != atc->mixer) {
+		mixer = atc->mixer;
+		mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
+		mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
+		mixer->set_input_left(mixer, MIX_MIC_IN, NULL);
+		mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
+		mixer->set_input_left(mixer, MIX_SPDIF_IN, NULL);
+		mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
+		ct_mixer_destroy(atc->mixer);
+	}
+
+	if (NULL != atc->daios) {
+		daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
+		for (i = 0; i < atc->n_daio; i++) {
+			daio = atc->daios[i];
+			if (daio->type < LINEIM) {
+				dao = container_of(daio, struct dao, daio);
+				dao->ops->clear_left_input(dao);
+				dao->ops->clear_right_input(dao);
+			} else {
+				dai = container_of(daio, struct dai, daio);
+				/* some thing to do for dai ... */
+			}
+			daio_mgr->put_daio(daio_mgr, daio);
+		}
+		kfree(atc->daios);
+	}
+
+	if (NULL != atc->pcm) {
+		sum_mgr = atc->rsc_mgrs[SUM];
+		for (i = 0; i < atc->n_pcm; i++)
+			sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
+
+		kfree(atc->pcm);
+	}
+
+	if (NULL != atc->srcs) {
+		src_mgr = atc->rsc_mgrs[SRC];
+		for (i = 0; i < atc->n_src; i++)
+			src_mgr->put_src(src_mgr, atc->srcs[i]);
+
+		kfree(atc->srcs);
+	}
+
+	if (NULL != atc->srcimps) {
+		srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+		for (i = 0; i < atc->n_srcimp; i++) {
+			srcimp = atc->srcimps[i];
+			srcimp->ops->unmap(srcimp);
+			srcimp_mgr->put_srcimp(srcimp_mgr, atc->srcimps[i]);
+		}
+		kfree(atc->srcimps);
+	}
+
+	for (i = 0; i < NUM_RSCTYP; i++) {
+		if ((NULL != rsc_mgr_funcs[i].destroy) &&
+		    (NULL != atc->rsc_mgrs[i]))
+			rsc_mgr_funcs[i].destroy(atc->rsc_mgrs[i]);
+
+	}
+
+	if (NULL != atc->hw)
+		destroy_hw_obj((struct hw *)atc->hw);
+
+	/* Destroy device virtual memory manager object */
+	if (NULL != atc->vm) {
+		ct_vm_destroy(atc->vm);
+		atc->vm = NULL;
+	}
+
+	kfree(atc);
+
+	return 0;
+}
+
+static int atc_dev_free(struct snd_device *dev)
+{
+	struct ct_atc *atc = dev->device_data;
+	return ct_atc_destroy(atc);
+}
+
+static int __devinit atc_identify_card(struct ct_atc *atc)
+{
+	const struct snd_pci_quirk *p;
+	const struct snd_pci_quirk *list;
+
+	switch (atc->chip_type) {
+	case ATC20K1:
+		atc->chip_name = "20K1";
+		list = subsys_20k1_list;
+		break;
+	case ATC20K2:
+		atc->chip_name = "20K2";
+		list = subsys_20k2_list;
+		break;
+	default:
+		return -ENOENT;
+	}
+	p = snd_pci_quirk_lookup(atc->pci, list);
+	if (!p)
+		return -ENOENT;
+	atc->model = p->value;
+	atc->model_name = ct_subsys_name[atc->model];
+	snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n",
+		   atc->chip_name, atc->model_name,
+		   atc->pci->subsystem_vendor,
+		   atc->pci->subsystem_device);
+	return 0;
+}
+
+int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc)
+{
+	enum CTALSADEVS i;
+	int err;
+
+	alsa_dev_funcs[MIXER].public_name = atc->chip_name;
+
+	for (i = 0; i < NUM_CTALSADEVS; i++) {
+		if (NULL == alsa_dev_funcs[i].create)
+			continue;
+
+		err = alsa_dev_funcs[i].create(atc, i,
+				alsa_dev_funcs[i].public_name);
+		if (err) {
+			printk(KERN_ERR "ctxfi: "
+			       "Creating alsa device %d failed!\n", i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit atc_create_hw_devs(struct ct_atc *atc)
+{
+	struct hw *hw;
+	struct card_conf info = {0};
+	int i, err;
+
+	err = create_hw_obj(atc->pci, atc->chip_type, atc->model, &hw);
+	if (err) {
+		printk(KERN_ERR "Failed to create hw obj!!!\n");
+		return err;
+	}
+	atc->hw = hw;
+
+	/* Initialize card hardware. */
+	info.rsr = atc->rsr;
+	info.msr = atc->msr;
+	info.vm_pgt_phys = atc_get_ptp_phys(atc, 0);
+	err = hw->card_init(hw, &info);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < NUM_RSCTYP; i++) {
+		if (NULL == rsc_mgr_funcs[i].create)
+			continue;
+
+		err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]);
+		if (err) {
+			printk(KERN_ERR "ctxfi: "
+			       "Failed to create rsc_mgr %d!!!\n", i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit atc_get_resources(struct ct_atc *atc)
+{
+	struct daio_desc da_desc = {0};
+	struct daio_mgr *daio_mgr;
+	struct src_desc src_dsc = {0};
+	struct src_mgr *src_mgr;
+	struct srcimp_desc srcimp_dsc = {0};
+	struct srcimp_mgr *srcimp_mgr;
+	struct sum_desc sum_dsc = {0};
+	struct sum_mgr *sum_mgr;
+	int err, i;
+
+	atc->daios = kzalloc(sizeof(void *)*(DAIONUM), GFP_KERNEL);
+	if (NULL == atc->daios)
+		return -ENOMEM;
+
+	atc->srcs = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
+	if (NULL == atc->srcs)
+		return -ENOMEM;
+
+	atc->srcimps = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
+	if (NULL == atc->srcimps)
+		return -ENOMEM;
+
+	atc->pcm = kzalloc(sizeof(void *)*(2*4), GFP_KERNEL);
+	if (NULL == atc->pcm)
+		return -ENOMEM;
+
+	daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
+	da_desc.msr = atc->msr;
+	for (i = 0, atc->n_daio = 0; i < DAIONUM-1; i++) {
+		da_desc.type = i;
+		err = daio_mgr->get_daio(daio_mgr, &da_desc,
+					(struct daio **)&atc->daios[i]);
+		if (err) {
+			printk(KERN_ERR "ctxfi: Failed to get DAIO "
+					"resource %d!!!\n", i);
+			return err;
+		}
+		atc->n_daio++;
+	}
+	if (atc->model == CTSB073X)
+		da_desc.type = SPDIFI1;
+	else
+		da_desc.type = SPDIFIO;
+	err = daio_mgr->get_daio(daio_mgr, &da_desc,
+				(struct daio **)&atc->daios[i]);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to get S/PDIF-in resource!!!\n");
+		return err;
+	}
+	atc->n_daio++;
+
+	src_mgr = atc->rsc_mgrs[SRC];
+	src_dsc.multi = 1;
+	src_dsc.msr = atc->msr;
+	src_dsc.mode = ARCRW;
+	for (i = 0, atc->n_src = 0; i < (2*2); i++) {
+		err = src_mgr->get_src(src_mgr, &src_dsc,
+					(struct src **)&atc->srcs[i]);
+		if (err)
+			return err;
+
+		atc->n_src++;
+	}
+
+	srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	srcimp_dsc.msr = 8; /* SRCIMPs for S/PDIFIn SRT */
+	for (i = 0, atc->n_srcimp = 0; i < (2*1); i++) {
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc,
+					(struct srcimp **)&atc->srcimps[i]);
+		if (err)
+			return err;
+
+		atc->n_srcimp++;
+	}
+	srcimp_dsc.msr = 8; /* SRCIMPs for LINE/MICIn SRT */
+	for (i = 0; i < (2*1); i++) {
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc,
+				(struct srcimp **)&atc->srcimps[2*1+i]);
+		if (err)
+			return err;
+
+		atc->n_srcimp++;
+	}
+
+	sum_mgr = atc->rsc_mgrs[SUM];
+	sum_dsc.msr = atc->msr;
+	for (i = 0, atc->n_pcm = 0; i < (2*4); i++) {
+		err = sum_mgr->get_sum(sum_mgr, &sum_dsc,
+					(struct sum **)&atc->pcm[i]);
+		if (err)
+			return err;
+
+		atc->n_pcm++;
+	}
+
+	err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static void __devinit
+atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai,
+		struct src **srcs, struct srcimp **srcimps)
+{
+	struct rsc *rscs[2] = {NULL};
+	struct src *src;
+	struct srcimp *srcimp;
+	int i = 0;
+
+	rscs[0] = &dai->daio.rscl;
+	rscs[1] = &dai->daio.rscr;
+	for (i = 0; i < 2; i++) {
+		src = srcs[i];
+		srcimp = srcimps[i];
+		srcimp->ops->map(srcimp, src, rscs[i]);
+		src_mgr->src_disable(src_mgr, src);
+	}
+
+	src_mgr->commit_write(src_mgr); /* Actually disable SRCs */
+
+	src = srcs[0];
+	src->ops->set_pm(src, 1);
+	for (i = 0; i < 2; i++) {
+		src = srcs[i];
+		src->ops->set_state(src, SRC_STATE_RUN);
+		src->ops->commit_write(src);
+		src_mgr->src_enable_s(src_mgr, src);
+	}
+
+	dai->ops->set_srt_srcl(dai, &(srcs[0]->rsc));
+	dai->ops->set_srt_srcr(dai, &(srcs[1]->rsc));
+
+	dai->ops->set_enb_src(dai, 1);
+	dai->ops->set_enb_srt(dai, 1);
+	dai->ops->commit_write(dai);
+
+	src_mgr->commit_write(src_mgr); /* Synchronously enable SRCs */
+}
+
+static void __devinit atc_connect_resources(struct ct_atc *atc)
+{
+	struct dai *dai;
+	struct dao *dao;
+	struct src *src;
+	struct sum *sum;
+	struct ct_mixer *mixer;
+	struct rsc *rscs[2] = {NULL};
+	int i, j;
+
+	mixer = atc->mixer;
+
+	for (i = MIX_WAVE_FRONT, j = LINEO1; i <= MIX_SPDIF_OUT; i++, j++) {
+		mixer->get_output_ports(mixer, i, &rscs[0], &rscs[1]);
+		dao = container_of(atc->daios[j], struct dao, daio);
+		dao->ops->set_left_input(dao, rscs[0]);
+		dao->ops->set_right_input(dao, rscs[1]);
+	}
+
+	dai = container_of(atc->daios[LINEIM], struct dai, daio);
+	atc_connect_dai(atc->rsc_mgrs[SRC], dai,
+			(struct src **)&atc->srcs[2],
+			(struct srcimp **)&atc->srcimps[2]);
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc);
+
+	dai = container_of(atc->daios[SPDIFIO], struct dai, daio);
+	atc_connect_dai(atc->rsc_mgrs[SRC], dai,
+			(struct src **)&atc->srcs[0],
+			(struct srcimp **)&atc->srcimps[0]);
+
+	src = atc->srcs[0];
+	mixer->set_input_left(mixer, MIX_SPDIF_IN, &src->rsc);
+	src = atc->srcs[1];
+	mixer->set_input_right(mixer, MIX_SPDIF_IN, &src->rsc);
+
+	for (i = MIX_PCMI_FRONT, j = 0; i <= MIX_PCMI_SURROUND; i++, j += 2) {
+		sum = atc->pcm[j];
+		mixer->set_input_left(mixer, i, &sum->rsc);
+		sum = atc->pcm[j+1];
+		mixer->set_input_right(mixer, i, &sum->rsc);
+	}
+}
+
+static struct ct_atc atc_preset __devinitdata = {
+	.map_audio_buffer = ct_map_audio_buffer,
+	.unmap_audio_buffer = ct_unmap_audio_buffer,
+	.pcm_playback_prepare = atc_pcm_playback_prepare,
+	.pcm_release_resources = atc_pcm_release_resources,
+	.pcm_playback_start = atc_pcm_playback_start,
+	.pcm_playback_stop = atc_pcm_stop,
+	.pcm_playback_position = atc_pcm_playback_position,
+	.pcm_capture_prepare = atc_pcm_capture_prepare,
+	.pcm_capture_start = atc_pcm_capture_start,
+	.pcm_capture_stop = atc_pcm_stop,
+	.pcm_capture_position = atc_pcm_capture_position,
+	.spdif_passthru_playback_prepare = spdif_passthru_playback_prepare,
+	.get_ptp_phys = atc_get_ptp_phys,
+	.select_line_in = atc_select_line_in,
+	.select_mic_in = atc_select_mic_in,
+	.select_digit_io = atc_select_digit_io,
+	.line_front_unmute = atc_line_front_unmute,
+	.line_surround_unmute = atc_line_surround_unmute,
+	.line_clfe_unmute = atc_line_clfe_unmute,
+	.line_rear_unmute = atc_line_rear_unmute,
+	.line_in_unmute = atc_line_in_unmute,
+	.spdif_out_unmute = atc_spdif_out_unmute,
+	.spdif_in_unmute = atc_spdif_in_unmute,
+	.spdif_out_get_status = atc_spdif_out_get_status,
+	.spdif_out_set_status = atc_spdif_out_set_status,
+	.spdif_out_passthru = atc_spdif_out_passthru,
+	.have_digit_io_switch = atc_have_digit_io_switch,
+};
+
+/**
+ *  ct_atc_create - create and initialize a hardware manager
+ *  @card: corresponding alsa card object
+ *  @pci: corresponding kernel pci device object
+ *  @ratc: return created object address in it
+ *
+ *  Creates and initializes a hardware manager.
+ *
+ *  Creates kmallocated ct_atc structure. Initializes hardware.
+ *  Returns 0 if suceeds, or negative error code if fails.
+ */
+
+int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
+			    unsigned int rsr, unsigned int msr,
+			    int chip_type, struct ct_atc **ratc)
+{
+	struct ct_atc *atc;
+	static struct snd_device_ops ops = {
+		.dev_free = atc_dev_free,
+	};
+	int err;
+
+	*ratc = NULL;
+
+	atc = kzalloc(sizeof(*atc), GFP_KERNEL);
+	if (NULL == atc)
+		return -ENOMEM;
+
+	/* Set operations */
+	*atc = atc_preset;
+
+	atc->card = card;
+	atc->pci = pci;
+	atc->rsr = rsr;
+	atc->msr = msr;
+	atc->chip_type = chip_type;
+
+	mutex_init(&atc->atc_mutex);
+
+	/* Find card model */
+	err = atc_identify_card(atc);
+	if (err < 0) {
+		printk(KERN_ERR "ctatc: Card not recognised\n");
+		goto error1;
+	}
+
+	/* Set up device virtual memory management object */
+	err = ct_vm_create(&atc->vm);
+	if (err < 0)
+		goto error1;
+
+	/* Create all atc hw devices */
+	err = atc_create_hw_devs(atc);
+	if (err < 0)
+		goto error1;
+
+	/* Get resources */
+	err = atc_get_resources(atc);
+	if (err < 0)
+		goto error1;
+
+	/* Build topology */
+	atc_connect_resources(atc);
+
+	atc->timer = ct_timer_new(atc);
+	if (!atc->timer)
+		goto error1;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, atc, &ops);
+	if (err < 0)
+		goto error1;
+
+	snd_card_set_dev(card, &pci->dev);
+
+	*ratc = atc;
+	return 0;
+
+error1:
+	ct_atc_destroy(atc);
+	printk(KERN_ERR "ctxfi: Something wrong!!!\n");
+	return err;
+}
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
new file mode 100644
index 00000000000..9fe620ea5f3
--- /dev/null
+++ b/sound/pci/ctxfi/ctatc.h
@@ -0,0 +1,147 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctatc.h
+ *
+ * @Brief
+ * This file contains the definition of the device resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTATC_H
+#define CTATC_H
+
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <sound/core.h>
+
+#include "ctvmem.h"
+#include "ctresource.h"
+
+enum CTALSADEVS {		/* Types of alsa devices */
+	FRONT,
+	SURROUND,
+	CLFE,
+	SIDE,
+	IEC958,
+	MIXER,
+	NUM_CTALSADEVS		/* This should always be the last */
+};
+
+struct ct_atc_chip_sub_details {
+	u16 subsys;
+	const char *nm_model;
+};
+
+struct ct_atc_chip_details {
+	u16 vendor;
+	u16 device;
+	const struct ct_atc_chip_sub_details *sub_details;
+	const char *nm_card;
+};
+
+struct ct_atc;
+struct ct_timer;
+struct ct_timer_instance;
+
+/* alsa pcm stream descriptor */
+struct ct_atc_pcm {
+	struct snd_pcm_substream *substream;
+	void (*interrupt)(struct ct_atc_pcm *apcm);
+	struct ct_timer_instance *timer;
+	unsigned int started:1;
+
+	/* Only mono and interleaved modes are supported now. */
+	struct ct_vm_block *vm_block;
+	void *src;		/* SRC for interacting with host memory */
+	void **srccs;		/* SRCs for sample rate conversion */
+	void **srcimps;		/* SRC Input Mappers */
+	void **amixers;		/* AMIXERs for routing converted data */
+	void *mono;		/* A SUM resource for mixing chs to one */
+	unsigned char n_srcc;	/* Number of converting SRCs */
+	unsigned char n_srcimp;	/* Number of SRC Input Mappers */
+	unsigned char n_amixer;	/* Number of AMIXERs */
+};
+
+/* Chip resource management object */
+struct ct_atc {
+	struct pci_dev *pci;
+	struct snd_card *card;
+	unsigned int rsr; /* reference sample rate in Hz */
+	unsigned int msr; /* master sample rate in rsr */
+	unsigned int pll_rate; /* current rate of Phase Lock Loop */
+
+	int chip_type;
+	int model;
+	const char *chip_name;
+	const char *model_name;
+
+	struct ct_vm *vm; /* device virtual memory manager for this card */
+	int (*map_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	void (*unmap_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	unsigned long (*get_ptp_phys)(struct ct_atc *atc, int index);
+
+	struct mutex atc_mutex;
+
+	int (*pcm_playback_prepare)(struct ct_atc *atc,
+				    struct ct_atc_pcm *apcm);
+	int (*pcm_playback_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_playback_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_playback_position)(struct ct_atc *atc,
+				     struct ct_atc_pcm *apcm);
+	int (*spdif_passthru_playback_prepare)(struct ct_atc *atc,
+					       struct ct_atc_pcm *apcm);
+	int (*pcm_capture_prepare)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_position)(struct ct_atc *atc,
+				    struct ct_atc_pcm *apcm);
+	int (*pcm_release_resources)(struct ct_atc *atc,
+				     struct ct_atc_pcm *apcm);
+	int (*select_line_in)(struct ct_atc *atc);
+	int (*select_mic_in)(struct ct_atc *atc);
+	int (*select_digit_io)(struct ct_atc *atc);
+	int (*line_front_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_surround_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_clfe_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_rear_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_in_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_out_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_in_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_out_get_status)(struct ct_atc *atc, unsigned int *status);
+	int (*spdif_out_set_status)(struct ct_atc *atc, unsigned int status);
+	int (*spdif_out_passthru)(struct ct_atc *atc, unsigned char state);
+	int (*have_digit_io_switch)(struct ct_atc *atc);
+
+	/* Don't touch! Used for internal object. */
+	void *rsc_mgrs[NUM_RSCTYP]; /* chip resource managers */
+	void *mixer;		/* internal mixer object */
+	void *hw;		/* chip specific hardware access object */
+	void **daios;		/* digital audio io resources */
+	void **pcm;		/* SUMs for collecting all pcm stream */
+	void **srcs;		/* Sample Rate Converters for input signal */
+	void **srcimps;		/* input mappers for SRCs */
+	unsigned char n_daio;
+	unsigned char n_src;
+	unsigned char n_srcimp;
+	unsigned char n_pcm;
+
+	struct ct_timer *timer;
+};
+
+
+int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
+			    unsigned int rsr, unsigned int msr, int chip_type,
+			    struct ct_atc **ratc);
+int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc);
+
+#endif /* CTATC_H */
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
new file mode 100644
index 00000000000..082e35c08c0
--- /dev/null
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -0,0 +1,769 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctdaio.c
+ *
+ * @Brief
+ * This file contains the implementation of Digital Audio Input Output
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#include "ctdaio.h"
+#include "cthardware.h"
+#include "ctimap.h"
+#include <linux/slab.h>
+#include <linux/kernel.h>
+
+#define DAIO_RESOURCE_NUM	NUM_DAIOTYP
+#define DAIO_OUT_MAX		SPDIFOO
+
+union daio_usage {
+	struct {
+		unsigned short lineo1:1;
+		unsigned short lineo2:1;
+		unsigned short lineo3:1;
+		unsigned short lineo4:1;
+		unsigned short spdifoo:1;
+		unsigned short lineim:1;
+		unsigned short spdifio:1;
+		unsigned short spdifi1:1;
+	} bf;
+	unsigned short data;
+};
+
+struct daio_rsc_idx {
+	unsigned short left;
+	unsigned short right;
+};
+
+struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = {
+	[LINEO1] = {.left = 0x00, .right = 0x01},
+	[LINEO2] = {.left = 0x18, .right = 0x19},
+	[LINEO3] = {.left = 0x08, .right = 0x09},
+	[LINEO4] = {.left = 0x10, .right = 0x11},
+	[LINEIM] = {.left = 0x1b5, .right = 0x1bd},
+	[SPDIFOO] = {.left = 0x20, .right = 0x21},
+	[SPDIFIO] = {.left = 0x15, .right = 0x1d},
+	[SPDIFI1] = {.left = 0x95, .right = 0x9d},
+};
+
+struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
+	[LINEO1] = {.left = 0x40, .right = 0x41},
+	[LINEO2] = {.left = 0x70, .right = 0x71},
+	[LINEO3] = {.left = 0x50, .right = 0x51},
+	[LINEO4] = {.left = 0x60, .right = 0x61},
+	[LINEIM] = {.left = 0x45, .right = 0xc5},
+	[SPDIFOO] = {.left = 0x00, .right = 0x01},
+	[SPDIFIO] = {.left = 0x05, .right = 0x85},
+};
+
+static int daio_master(struct rsc *rsc)
+{
+	/* Actually, this is not the resource index of DAIO.
+	 * For DAO, it is the input mapper index. And, for DAI,
+	 * it is the output time-slot index. */
+	return rsc->conj = rsc->idx;
+}
+
+static int daio_index(const struct rsc *rsc)
+{
+	return rsc->conj;
+}
+
+static int daio_out_next_conj(struct rsc *rsc)
+{
+	return rsc->conj += 2;
+}
+
+static int daio_in_next_conj_20k1(struct rsc *rsc)
+{
+	return rsc->conj += 0x200;
+}
+
+static int daio_in_next_conj_20k2(struct rsc *rsc)
+{
+	return rsc->conj += 0x100;
+}
+
+static struct rsc_ops daio_out_rsc_ops = {
+	.master		= daio_master,
+	.next_conj	= daio_out_next_conj,
+	.index		= daio_index,
+	.output_slot	= NULL,
+};
+
+static struct rsc_ops daio_in_rsc_ops_20k1 = {
+	.master		= daio_master,
+	.next_conj	= daio_in_next_conj_20k1,
+	.index		= NULL,
+	.output_slot	= daio_index,
+};
+
+static struct rsc_ops daio_in_rsc_ops_20k2 = {
+	.master		= daio_master,
+	.next_conj	= daio_in_next_conj_20k2,
+	.index		= NULL,
+	.output_slot	= daio_index,
+};
+
+static unsigned int daio_device_index(enum DAIOTYP type, struct hw *hw)
+{
+	switch (hw->chip_type) {
+	case ATC20K1:
+		switch (type) {
+		case SPDIFOO:	return 0;
+		case SPDIFIO:	return 0;
+		case SPDIFI1:	return 1;
+		case LINEO1:	return 4;
+		case LINEO2:	return 7;
+		case LINEO3:	return 5;
+		case LINEO4:	return 6;
+		case LINEIM:	return 7;
+		default:	return -EINVAL;
+		}
+	case ATC20K2:
+		switch (type) {
+		case SPDIFOO:	return 0;
+		case SPDIFIO:	return 0;
+		case LINEO1:	return 4;
+		case LINEO2:	return 7;
+		case LINEO3:	return 5;
+		case LINEO4:	return 6;
+		case LINEIM:	return 4;
+		default:	return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc);
+
+static int dao_spdif_get_spos(struct dao *dao, unsigned int *spos)
+{
+	((struct hw *)dao->hw)->dao_get_spos(dao->ctrl_blk, spos);
+	return 0;
+}
+
+static int dao_spdif_set_spos(struct dao *dao, unsigned int spos)
+{
+	((struct hw *)dao->hw)->dao_set_spos(dao->ctrl_blk, spos);
+	return 0;
+}
+
+static int dao_commit_write(struct dao *dao)
+{
+	((struct hw *)dao->hw)->dao_commit_write(dao->hw,
+		daio_device_index(dao->daio.type, dao->hw), dao->ctrl_blk);
+	return 0;
+}
+
+static int dao_set_left_input(struct dao *dao, struct rsc *input)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	entry = kzalloc((sizeof(*entry) * daio->rscl.msr), GFP_KERNEL);
+	if (NULL == entry)
+		return -ENOMEM;
+
+	/* Program master and conjugate resources */
+	input->ops->master(input);
+	daio->rscl.ops->master(&daio->rscl);
+	for (i = 0; i < daio->rscl.msr; i++, entry++) {
+		entry->slot = input->ops->output_slot(input);
+		entry->user = entry->addr = daio->rscl.ops->index(&daio->rscl);
+		dao->mgr->imap_add(dao->mgr, entry);
+		dao->imappers[i] = entry;
+
+		input->ops->next_conj(input);
+		daio->rscl.ops->next_conj(&daio->rscl);
+	}
+	input->ops->master(input);
+	daio->rscl.ops->master(&daio->rscl);
+
+	return 0;
+}
+
+static int dao_set_right_input(struct dao *dao, struct rsc *input)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	entry = kzalloc((sizeof(*entry) * daio->rscr.msr), GFP_KERNEL);
+	if (NULL == entry)
+		return -ENOMEM;
+
+	/* Program master and conjugate resources */
+	input->ops->master(input);
+	daio->rscr.ops->master(&daio->rscr);
+	for (i = 0; i < daio->rscr.msr; i++, entry++) {
+		entry->slot = input->ops->output_slot(input);
+		entry->user = entry->addr = daio->rscr.ops->index(&daio->rscr);
+		dao->mgr->imap_add(dao->mgr, entry);
+		dao->imappers[daio->rscl.msr + i] = entry;
+
+		input->ops->next_conj(input);
+		daio->rscr.ops->next_conj(&daio->rscr);
+	}
+	input->ops->master(input);
+	daio->rscr.ops->master(&daio->rscr);
+
+	return 0;
+}
+
+static int dao_clear_left_input(struct dao *dao)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	if (NULL == dao->imappers[0])
+		return 0;
+
+	entry = dao->imappers[0];
+	dao->mgr->imap_delete(dao->mgr, entry);
+	/* Program conjugate resources */
+	for (i = 1; i < daio->rscl.msr; i++) {
+		entry = dao->imappers[i];
+		dao->mgr->imap_delete(dao->mgr, entry);
+		dao->imappers[i] = NULL;
+	}
+
+	kfree(dao->imappers[0]);
+	dao->imappers[0] = NULL;
+
+	return 0;
+}
+
+static int dao_clear_right_input(struct dao *dao)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	if (NULL == dao->imappers[daio->rscl.msr])
+		return 0;
+
+	entry = dao->imappers[daio->rscl.msr];
+	dao->mgr->imap_delete(dao->mgr, entry);
+	/* Program conjugate resources */
+	for (i = 1; i < daio->rscr.msr; i++) {
+		entry = dao->imappers[daio->rscl.msr + i];
+		dao->mgr->imap_delete(dao->mgr, entry);
+		dao->imappers[daio->rscl.msr + i] = NULL;
+	}
+
+	kfree(dao->imappers[daio->rscl.msr]);
+	dao->imappers[daio->rscl.msr] = NULL;
+
+	return 0;
+}
+
+static struct dao_rsc_ops dao_ops = {
+	.set_spos		= dao_spdif_set_spos,
+	.commit_write		= dao_commit_write,
+	.get_spos		= dao_spdif_get_spos,
+	.reinit			= dao_rsc_reinit,
+	.set_left_input		= dao_set_left_input,
+	.set_right_input	= dao_set_right_input,
+	.clear_left_input	= dao_clear_left_input,
+	.clear_right_input	= dao_clear_right_input,
+};
+
+static int dai_set_srt_srcl(struct dai *dai, struct rsc *src)
+{
+	src->ops->master(src);
+	((struct hw *)dai->hw)->dai_srt_set_srcm(dai->ctrl_blk,
+						src->ops->index(src));
+	return 0;
+}
+
+static int dai_set_srt_srcr(struct dai *dai, struct rsc *src)
+{
+	src->ops->master(src);
+	((struct hw *)dai->hw)->dai_srt_set_srco(dai->ctrl_blk,
+						src->ops->index(src));
+	return 0;
+}
+
+static int dai_set_srt_msr(struct dai *dai, unsigned int msr)
+{
+	unsigned int rsr;
+
+	for (rsr = 0; msr > 1; msr >>= 1)
+		rsr++;
+
+	((struct hw *)dai->hw)->dai_srt_set_rsr(dai->ctrl_blk, rsr);
+	return 0;
+}
+
+static int dai_set_enb_src(struct dai *dai, unsigned int enb)
+{
+	((struct hw *)dai->hw)->dai_srt_set_ec(dai->ctrl_blk, enb);
+	return 0;
+}
+
+static int dai_set_enb_srt(struct dai *dai, unsigned int enb)
+{
+	((struct hw *)dai->hw)->dai_srt_set_et(dai->ctrl_blk, enb);
+	return 0;
+}
+
+static int dai_commit_write(struct dai *dai)
+{
+	((struct hw *)dai->hw)->dai_commit_write(dai->hw,
+		daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk);
+	return 0;
+}
+
+static struct dai_rsc_ops dai_ops = {
+	.set_srt_srcl		= dai_set_srt_srcl,
+	.set_srt_srcr		= dai_set_srt_srcr,
+	.set_srt_msr		= dai_set_srt_msr,
+	.set_enb_src		= dai_set_enb_src,
+	.set_enb_srt		= dai_set_enb_srt,
+	.commit_write		= dai_commit_write,
+};
+
+static int daio_rsc_init(struct daio *daio,
+			 const struct daio_desc *desc,
+			 void *hw)
+{
+	int err;
+	unsigned int idx_l, idx_r;
+
+	switch (((struct hw *)hw)->chip_type) {
+	case ATC20K1:
+		idx_l = idx_20k1[desc->type].left;
+		idx_r = idx_20k1[desc->type].right;
+		break;
+	case ATC20K2:
+		idx_l = idx_20k2[desc->type].left;
+		idx_r = idx_20k2[desc->type].right;
+		break;
+	default:
+		return -EINVAL;
+	}
+	err = rsc_init(&daio->rscl, idx_l, DAIO, desc->msr, hw);
+	if (err)
+		return err;
+
+	err = rsc_init(&daio->rscr, idx_r, DAIO, desc->msr, hw);
+	if (err)
+		goto error1;
+
+	/* Set daio->rscl/r->ops to daio specific ones */
+	if (desc->type <= DAIO_OUT_MAX) {
+		daio->rscl.ops = daio->rscr.ops = &daio_out_rsc_ops;
+	} else {
+		switch (((struct hw *)hw)->chip_type) {
+		case ATC20K1:
+			daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k1;
+			break;
+		case ATC20K2:
+			daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k2;
+			break;
+		default:
+			break;
+		}
+	}
+	daio->type = desc->type;
+
+	return 0;
+
+error1:
+	rsc_uninit(&daio->rscl);
+	return err;
+}
+
+static int daio_rsc_uninit(struct daio *daio)
+{
+	rsc_uninit(&daio->rscl);
+	rsc_uninit(&daio->rscr);
+
+	return 0;
+}
+
+static int dao_rsc_init(struct dao *dao,
+			const struct daio_desc *desc,
+			struct daio_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+	unsigned int conf;
+	int err;
+
+	err = daio_rsc_init(&dao->daio, desc, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	dao->imappers = kzalloc(sizeof(void *)*desc->msr*2, GFP_KERNEL);
+	if (NULL == dao->imappers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	dao->ops = &dao_ops;
+	dao->mgr = mgr;
+	dao->hw = hw;
+	err = hw->dao_get_ctrl_blk(&dao->ctrl_blk);
+	if (err)
+		goto error2;
+
+	hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw));
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	conf = (desc->msr & 0x7) | (desc->passthru << 3);
+	hw->daio_mgr_dao_init(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw), conf);
+	hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw));
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	return 0;
+
+error2:
+	kfree(dao->imappers);
+	dao->imappers = NULL;
+error1:
+	daio_rsc_uninit(&dao->daio);
+	return err;
+}
+
+static int dao_rsc_uninit(struct dao *dao)
+{
+	if (NULL != dao->imappers) {
+		if (NULL != dao->imappers[0])
+			dao_clear_left_input(dao);
+
+		if (NULL != dao->imappers[dao->daio.rscl.msr])
+			dao_clear_right_input(dao);
+
+		kfree(dao->imappers);
+		dao->imappers = NULL;
+	}
+	((struct hw *)dao->hw)->dao_put_ctrl_blk(dao->ctrl_blk);
+	dao->hw = dao->ctrl_blk = NULL;
+	daio_rsc_uninit(&dao->daio);
+
+	return 0;
+}
+
+static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc)
+{
+	struct daio_mgr *mgr = dao->mgr;
+	struct daio_desc dsc = {0};
+
+	dsc.type = dao->daio.type;
+	dsc.msr = desc->msr;
+	dsc.passthru = desc->passthru;
+	dao_rsc_uninit(dao);
+	return dao_rsc_init(dao, &dsc, mgr);
+}
+
+static int dai_rsc_init(struct dai *dai,
+			const struct daio_desc *desc,
+			struct daio_mgr *mgr)
+{
+	int err;
+	struct hw *hw = mgr->mgr.hw;
+	unsigned int rsr, msr;
+
+	err = daio_rsc_init(&dai->daio, desc, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	dai->ops = &dai_ops;
+	dai->hw = mgr->mgr.hw;
+	err = hw->dai_get_ctrl_blk(&dai->ctrl_blk);
+	if (err)
+		goto error1;
+
+	for (rsr = 0, msr = desc->msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->dai_srt_set_rsr(dai->ctrl_blk, rsr);
+	hw->dai_srt_set_drat(dai->ctrl_blk, 0);
+	/* default to disabling control of a SRC */
+	hw->dai_srt_set_ec(dai->ctrl_blk, 0);
+	hw->dai_srt_set_et(dai->ctrl_blk, 0); /* default to disabling SRT */
+	hw->dai_commit_write(hw,
+		daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk);
+
+	return 0;
+
+error1:
+	daio_rsc_uninit(&dai->daio);
+	return err;
+}
+
+static int dai_rsc_uninit(struct dai *dai)
+{
+	((struct hw *)dai->hw)->dai_put_ctrl_blk(dai->ctrl_blk);
+	dai->hw = dai->ctrl_blk = NULL;
+	daio_rsc_uninit(&dai->daio);
+	return 0;
+}
+
+static int daio_mgr_get_rsc(struct rsc_mgr *mgr, enum DAIOTYP type)
+{
+	if (((union daio_usage *)mgr->rscs)->data & (0x1 << type))
+		return -ENOENT;
+
+	((union daio_usage *)mgr->rscs)->data |= (0x1 << type);
+
+	return 0;
+}
+
+static int daio_mgr_put_rsc(struct rsc_mgr *mgr, enum DAIOTYP type)
+{
+	((union daio_usage *)mgr->rscs)->data &= ~(0x1 << type);
+
+	return 0;
+}
+
+static int get_daio_rsc(struct daio_mgr *mgr,
+			const struct daio_desc *desc,
+			struct daio **rdaio)
+{
+	int err;
+	struct dai *dai = NULL;
+	struct dao *dao = NULL;
+	unsigned long flags;
+
+	*rdaio = NULL;
+
+	/* Check whether there are sufficient daio resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	err = daio_mgr_get_rsc(&mgr->mgr, desc->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "Can't meet DAIO resource request!\n");
+		return err;
+	}
+
+	/* Allocate mem for daio resource */
+	if (desc->type <= DAIO_OUT_MAX) {
+		dao = kzalloc(sizeof(*dao), GFP_KERNEL);
+		if (NULL == dao) {
+			err = -ENOMEM;
+			goto error;
+		}
+		err = dao_rsc_init(dao, desc, mgr);
+		if (err)
+			goto error;
+
+		*rdaio = &dao->daio;
+	} else {
+		dai = kzalloc(sizeof(*dai), GFP_KERNEL);
+		if (NULL == dai) {
+			err = -ENOMEM;
+			goto error;
+		}
+		err = dai_rsc_init(dai, desc, mgr);
+		if (err)
+			goto error;
+
+		*rdaio = &dai->daio;
+	}
+
+	mgr->daio_enable(mgr, *rdaio);
+	mgr->commit_write(mgr);
+
+	return 0;
+
+error:
+	if (NULL != dao)
+		kfree(dao);
+	else if (NULL != dai)
+		kfree(dai);
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	daio_mgr_put_rsc(&mgr->mgr, desc->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	return err;
+}
+
+static int put_daio_rsc(struct daio_mgr *mgr, struct daio *daio)
+{
+	unsigned long flags;
+
+	mgr->daio_disable(mgr, daio);
+	mgr->commit_write(mgr);
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	daio_mgr_put_rsc(&mgr->mgr, daio->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+
+	if (daio->type <= DAIO_OUT_MAX) {
+		dao_rsc_uninit(container_of(daio, struct dao, daio));
+		kfree(container_of(daio, struct dao, daio));
+	} else {
+		dai_rsc_uninit(container_of(daio, struct dai, daio));
+		kfree(container_of(daio, struct dai, daio));
+	}
+
+	return 0;
+}
+
+static int daio_mgr_enb_daio(struct daio_mgr *mgr, struct daio *daio)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	if (DAIO_OUT_MAX >= daio->type) {
+		hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	} else {
+		hw->daio_mgr_enb_dai(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_daio(struct daio_mgr *mgr, struct daio *daio)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	if (DAIO_OUT_MAX >= daio->type) {
+		hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	} else {
+		hw->daio_mgr_dsb_dai(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	}
+	return 0;
+}
+
+static int daio_map_op(void *data, struct imapper *entry)
+{
+	struct rsc_mgr *mgr = &((struct daio_mgr *)data)->mgr;
+	struct hw *hw = mgr->hw;
+
+	hw->daio_mgr_set_imaparc(mgr->ctrl_blk, entry->slot);
+	hw->daio_mgr_set_imapnxt(mgr->ctrl_blk, entry->next);
+	hw->daio_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr);
+	hw->daio_mgr_commit_write(mgr->hw, mgr->ctrl_blk);
+
+	return 0;
+}
+
+static int daio_imap_add(struct daio_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	if ((0 == entry->addr) && (mgr->init_imap_added)) {
+		input_mapper_delete(&mgr->imappers, mgr->init_imap,
+							daio_map_op, mgr);
+		mgr->init_imap_added = 0;
+	}
+	err = input_mapper_add(&mgr->imappers, entry, daio_map_op, mgr);
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int daio_imap_delete(struct daio_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	err = input_mapper_delete(&mgr->imappers, entry, daio_map_op, mgr);
+	if (list_empty(&mgr->imappers)) {
+		input_mapper_add(&mgr->imappers, mgr->init_imap,
+							daio_map_op, mgr);
+		mgr->init_imap_added = 1;
+	}
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int daio_mgr_commit_write(struct daio_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+	return 0;
+}
+
+int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr)
+{
+	int err, i;
+	struct daio_mgr *daio_mgr;
+	struct imapper *entry;
+
+	*rdaio_mgr = NULL;
+	daio_mgr = kzalloc(sizeof(*daio_mgr), GFP_KERNEL);
+	if (NULL == daio_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&daio_mgr->mgr, DAIO, DAIO_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&daio_mgr->mgr_lock);
+	spin_lock_init(&daio_mgr->imap_lock);
+	INIT_LIST_HEAD(&daio_mgr->imappers);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (NULL == entry) {
+		err = -ENOMEM;
+		goto error2;
+	}
+	entry->slot = entry->addr = entry->next = entry->user = 0;
+	list_add(&entry->list, &daio_mgr->imappers);
+	daio_mgr->init_imap = entry;
+	daio_mgr->init_imap_added = 1;
+
+	daio_mgr->get_daio = get_daio_rsc;
+	daio_mgr->put_daio = put_daio_rsc;
+	daio_mgr->daio_enable = daio_mgr_enb_daio;
+	daio_mgr->daio_disable = daio_mgr_dsb_daio;
+	daio_mgr->imap_add = daio_imap_add;
+	daio_mgr->imap_delete = daio_imap_delete;
+	daio_mgr->commit_write = daio_mgr_commit_write;
+
+	for (i = 0; i < 8; i++) {
+		((struct hw *)hw)->daio_mgr_dsb_dao(daio_mgr->mgr.ctrl_blk, i);
+		((struct hw *)hw)->daio_mgr_dsb_dai(daio_mgr->mgr.ctrl_blk, i);
+	}
+	((struct hw *)hw)->daio_mgr_commit_write(hw, daio_mgr->mgr.ctrl_blk);
+
+	*rdaio_mgr = daio_mgr;
+
+	return 0;
+
+error2:
+	rsc_mgr_uninit(&daio_mgr->mgr);
+error1:
+	kfree(daio_mgr);
+	return err;
+}
+
+int daio_mgr_destroy(struct daio_mgr *daio_mgr)
+{
+	unsigned long flags;
+
+	/* free daio input mapper list */
+	spin_lock_irqsave(&daio_mgr->imap_lock, flags);
+	free_input_mapper_list(&daio_mgr->imappers);
+	spin_unlock_irqrestore(&daio_mgr->imap_lock, flags);
+
+	rsc_mgr_uninit(&daio_mgr->mgr);
+	kfree(daio_mgr);
+
+	return 0;
+}
+
diff --git a/sound/pci/ctxfi/ctdaio.h b/sound/pci/ctxfi/ctdaio.h
new file mode 100644
index 00000000000..0f52ce571ee
--- /dev/null
+++ b/sound/pci/ctxfi/ctdaio.h
@@ -0,0 +1,122 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctdaio.h
+ *
+ * @Brief
+ * This file contains the definition of Digital Audio Input Output
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#ifndef CTDAIO_H
+#define CTDAIO_H
+
+#include "ctresource.h"
+#include "ctimap.h"
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+/* Define the descriptor of a daio resource */
+enum DAIOTYP {
+	LINEO1,
+	LINEO2,
+	LINEO3,
+	LINEO4,
+	SPDIFOO,	/* S/PDIF Out (Flexijack/Optical) */
+	LINEIM,
+	SPDIFIO,	/* S/PDIF In (Flexijack/Optical) on the card */
+	SPDIFI1,	/* S/PDIF In on internal Drive Bay */
+	NUM_DAIOTYP
+};
+
+struct dao_rsc_ops;
+struct dai_rsc_ops;
+struct daio_mgr;
+
+struct daio {
+	struct rsc rscl;	/* Basic resource info for left TX/RX */
+	struct rsc rscr;	/* Basic resource info for right TX/RX */
+	enum DAIOTYP type;
+};
+
+struct dao {
+	struct daio daio;
+	struct dao_rsc_ops *ops;	/* DAO specific operations */
+	struct imapper **imappers;
+	struct daio_mgr *mgr;
+	void *hw;
+	void *ctrl_blk;
+};
+
+struct dai {
+	struct daio daio;
+	struct dai_rsc_ops *ops;	/* DAI specific operations */
+	void *hw;
+	void *ctrl_blk;
+};
+
+struct dao_desc {
+	unsigned int msr:4;
+	unsigned int passthru:1;
+};
+
+struct dao_rsc_ops {
+	int (*set_spos)(struct dao *dao, unsigned int spos);
+	int (*commit_write)(struct dao *dao);
+	int (*get_spos)(struct dao *dao, unsigned int *spos);
+	int (*reinit)(struct dao *dao, const struct dao_desc *desc);
+	int (*set_left_input)(struct dao *dao, struct rsc *input);
+	int (*set_right_input)(struct dao *dao, struct rsc *input);
+	int (*clear_left_input)(struct dao *dao);
+	int (*clear_right_input)(struct dao *dao);
+};
+
+struct dai_rsc_ops {
+	int (*set_srt_srcl)(struct dai *dai, struct rsc *src);
+	int (*set_srt_srcr)(struct dai *dai, struct rsc *src);
+	int (*set_srt_msr)(struct dai *dai, unsigned int msr);
+	int (*set_enb_src)(struct dai *dai, unsigned int enb);
+	int (*set_enb_srt)(struct dai *dai, unsigned int enb);
+	int (*commit_write)(struct dai *dai);
+};
+
+/* Define daio resource request description info */
+struct daio_desc {
+	unsigned int type:4;
+	unsigned int msr:4;
+	unsigned int passthru:1;
+};
+
+struct daio_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+	spinlock_t imap_lock;
+	struct list_head imappers;
+	struct imapper *init_imap;
+	unsigned int init_imap_added;
+
+	 /* request one daio resource */
+	int (*get_daio)(struct daio_mgr *mgr,
+			const struct daio_desc *desc, struct daio **rdaio);
+	/* return one daio resource */
+	int (*put_daio)(struct daio_mgr *mgr, struct daio *daio);
+	int (*daio_enable)(struct daio_mgr *mgr, struct daio *daio);
+	int (*daio_disable)(struct daio_mgr *mgr, struct daio *daio);
+	int (*imap_add)(struct daio_mgr *mgr, struct imapper *entry);
+	int (*imap_delete)(struct daio_mgr *mgr, struct imapper *entry);
+	int (*commit_write)(struct daio_mgr *mgr);
+};
+
+/* Constructor and destructor of daio resource manager */
+int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr);
+int daio_mgr_destroy(struct daio_mgr *daio_mgr);
+
+#endif /* CTDAIO_H */
diff --git a/sound/pci/ctxfi/cthardware.c b/sound/pci/ctxfi/cthardware.c
new file mode 100644
index 00000000000..8e64f4862e8
--- /dev/null
+++ b/sound/pci/ctxfi/cthardware.c
@@ -0,0 +1,91 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthardware.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	Jun 26 2008
+ *
+ */
+
+#include "cthardware.h"
+#include "cthw20k1.h"
+#include "cthw20k2.h"
+#include <linux/bug.h>
+
+int __devinit create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type,
+			    enum CTCARDS model, struct hw **rhw)
+{
+	int err;
+
+	switch (chip_type) {
+	case ATC20K1:
+		err = create_20k1_hw_obj(rhw);
+		break;
+	case ATC20K2:
+		err = create_20k2_hw_obj(rhw);
+		break;
+	default:
+		err = -ENODEV;
+		break;
+	}
+	if (err)
+		return err;
+
+	(*rhw)->pci = pci;
+	(*rhw)->chip_type = chip_type;
+	(*rhw)->model = model;
+
+	return 0;
+}
+
+int destroy_hw_obj(struct hw *hw)
+{
+	int err;
+
+	switch (hw->pci->device) {
+	case 0x0005:	/* 20k1 device */
+		err = destroy_20k1_hw_obj(hw);
+		break;
+	case 0x000B:	/* 20k2 device */
+		err = destroy_20k2_hw_obj(hw);
+		break;
+	default:
+		err = -ENODEV;
+		break;
+	}
+
+	return err;
+}
+
+unsigned int get_field(unsigned int data, unsigned int field)
+{
+	int i;
+
+	BUG_ON(!field);
+	/* @field should always be greater than 0 */
+	for (i = 0; !(field & (1 << i)); )
+		i++;
+
+	return (data & field) >> i;
+}
+
+void set_field(unsigned int *data, unsigned int field, unsigned int value)
+{
+	int i;
+
+	BUG_ON(!field);
+	/* @field should always be greater than 0 */
+	for (i = 0; !(field & (1 << i)); )
+		i++;
+
+	*data = (*data & (~field)) | ((value << i) & field);
+}
+
diff --git a/sound/pci/ctxfi/cthardware.h b/sound/pci/ctxfi/cthardware.h
new file mode 100644
index 00000000000..4a8e04f090a
--- /dev/null
+++ b/sound/pci/ctxfi/cthardware.h
@@ -0,0 +1,196 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthardware.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHARDWARE_H
+#define CTHARDWARE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+enum CHIPTYP {
+	ATC20K1,
+	ATC20K2,
+	ATCNONE
+};
+
+enum CTCARDS {
+	/* 20k1 models */
+	CTSB055X,
+	CTSB073X,
+	CTUAA,
+	CT20K1_UNKNOWN,
+	/* 20k2 models */
+	CTSB0760,
+	CTHENDRIX,
+	CTSB0880,
+	NUM_CTCARDS		/* This should always be the last */
+};
+
+/* Type of input source for ADC */
+enum ADCSRC{
+	ADC_MICIN,
+	ADC_LINEIN,
+	ADC_VIDEO,
+	ADC_AUX,
+	ADC_NONE	/* Switch to digital input */
+};
+
+struct card_conf {
+	/* device virtual mem page table page physical addr
+	 * (supporting one page table page now) */
+	unsigned long vm_pgt_phys;
+	unsigned int rsr;	/* reference sample rate in Hzs*/
+	unsigned int msr;	/* master sample rate in rsrs */
+};
+
+struct hw {
+	int (*card_init)(struct hw *hw, struct card_conf *info);
+	int (*card_stop)(struct hw *hw);
+	int (*pll_init)(struct hw *hw, unsigned int rsr);
+	int (*is_adc_source_selected)(struct hw *hw, enum ADCSRC source);
+	int (*select_adc_source)(struct hw *hw, enum ADCSRC source);
+	int (*have_digit_io_switch)(struct hw *hw);
+
+	/* SRC operations */
+	int (*src_rsc_get_ctrl_blk)(void **rblk);
+	int (*src_rsc_put_ctrl_blk)(void *blk);
+	int (*src_set_state)(void *blk, unsigned int state);
+	int (*src_set_bm)(void *blk, unsigned int bm);
+	int (*src_set_rsr)(void *blk, unsigned int rsr);
+	int (*src_set_sf)(void *blk, unsigned int sf);
+	int (*src_set_wr)(void *blk, unsigned int wr);
+	int (*src_set_pm)(void *blk, unsigned int pm);
+	int (*src_set_rom)(void *blk, unsigned int rom);
+	int (*src_set_vo)(void *blk, unsigned int vo);
+	int (*src_set_st)(void *blk, unsigned int st);
+	int (*src_set_ie)(void *blk, unsigned int ie);
+	int (*src_set_ilsz)(void *blk, unsigned int ilsz);
+	int (*src_set_bp)(void *blk, unsigned int bp);
+	int (*src_set_cisz)(void *blk, unsigned int cisz);
+	int (*src_set_ca)(void *blk, unsigned int ca);
+	int (*src_set_sa)(void *blk, unsigned int sa);
+	int (*src_set_la)(void *blk, unsigned int la);
+	int (*src_set_pitch)(void *blk, unsigned int pitch);
+	int (*src_set_clear_zbufs)(void *blk, unsigned int clear);
+	int (*src_set_dirty)(void *blk, unsigned int flags);
+	int (*src_set_dirty_all)(void *blk);
+	int (*src_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*src_get_ca)(struct hw *hw, unsigned int idx, void *blk);
+	unsigned int (*src_get_dirty)(void *blk);
+	unsigned int (*src_dirty_conj_mask)(void);
+	int (*src_mgr_get_ctrl_blk)(void **rblk);
+	int (*src_mgr_put_ctrl_blk)(void *blk);
+	/* syncly enable src @idx */
+	int (*src_mgr_enbs_src)(void *blk, unsigned int idx);
+	/* enable src @idx */
+	int (*src_mgr_enb_src)(void *blk, unsigned int idx);
+	/* disable src @idx */
+	int (*src_mgr_dsb_src)(void *blk, unsigned int idx);
+	int (*src_mgr_commit_write)(struct hw *hw, void *blk);
+
+	/* SRC Input Mapper operations */
+	int (*srcimp_mgr_get_ctrl_blk)(void **rblk);
+	int (*srcimp_mgr_put_ctrl_blk)(void *blk);
+	int (*srcimp_mgr_set_imaparc)(void *blk, unsigned int slot);
+	int (*srcimp_mgr_set_imapuser)(void *blk, unsigned int user);
+	int (*srcimp_mgr_set_imapnxt)(void *blk, unsigned int next);
+	int (*srcimp_mgr_set_imapaddr)(void *blk, unsigned int addr);
+	int (*srcimp_mgr_commit_write)(struct hw *hw, void *blk);
+
+	/* AMIXER operations */
+	int (*amixer_rsc_get_ctrl_blk)(void **rblk);
+	int (*amixer_rsc_put_ctrl_blk)(void *blk);
+	int (*amixer_mgr_get_ctrl_blk)(void **rblk);
+	int (*amixer_mgr_put_ctrl_blk)(void *blk);
+	int (*amixer_set_mode)(void *blk, unsigned int mode);
+	int (*amixer_set_iv)(void *blk, unsigned int iv);
+	int (*amixer_set_x)(void *blk, unsigned int x);
+	int (*amixer_set_y)(void *blk, unsigned int y);
+	int (*amixer_set_sadr)(void *blk, unsigned int sadr);
+	int (*amixer_set_se)(void *blk, unsigned int se);
+	int (*amixer_set_dirty)(void *blk, unsigned int flags);
+	int (*amixer_set_dirty_all)(void *blk);
+	int (*amixer_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*amixer_get_y)(void *blk);
+	unsigned int (*amixer_get_dirty)(void *blk);
+
+	/* DAIO operations */
+	int (*dai_get_ctrl_blk)(void **rblk);
+	int (*dai_put_ctrl_blk)(void *blk);
+	int (*dai_srt_set_srco)(void *blk, unsigned int src);
+	int (*dai_srt_set_srcm)(void *blk, unsigned int src);
+	int (*dai_srt_set_rsr)(void *blk, unsigned int rsr);
+	int (*dai_srt_set_drat)(void *blk, unsigned int drat);
+	int (*dai_srt_set_ec)(void *blk, unsigned int ec);
+	int (*dai_srt_set_et)(void *blk, unsigned int et);
+	int (*dai_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*dao_get_ctrl_blk)(void **rblk);
+	int (*dao_put_ctrl_blk)(void *blk);
+	int (*dao_set_spos)(void *blk, unsigned int spos);
+	int (*dao_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*dao_get_spos)(void *blk, unsigned int *spos);
+
+	int (*daio_mgr_get_ctrl_blk)(struct hw *hw, void **rblk);
+	int (*daio_mgr_put_ctrl_blk)(void *blk);
+	int (*daio_mgr_enb_dai)(void *blk, unsigned int idx);
+	int (*daio_mgr_dsb_dai)(void *blk, unsigned int idx);
+	int (*daio_mgr_enb_dao)(void *blk, unsigned int idx);
+	int (*daio_mgr_dsb_dao)(void *blk, unsigned int idx);
+	int (*daio_mgr_dao_init)(void *blk, unsigned int idx,
+						unsigned int conf);
+	int (*daio_mgr_set_imaparc)(void *blk, unsigned int slot);
+	int (*daio_mgr_set_imapnxt)(void *blk, unsigned int next);
+	int (*daio_mgr_set_imapaddr)(void *blk, unsigned int addr);
+	int (*daio_mgr_commit_write)(struct hw *hw, void *blk);
+
+	int (*set_timer_irq)(struct hw *hw, int enable);
+	int (*set_timer_tick)(struct hw *hw, unsigned int tick);
+	unsigned int (*get_wc)(struct hw *hw);
+
+	void (*irq_callback)(void *data, unsigned int bit);
+	void *irq_callback_data;
+
+	struct pci_dev *pci;	/* the pci kernel structure of this card */
+	int irq;
+	unsigned long io_base;
+	unsigned long mem_base;
+
+	enum CHIPTYP chip_type;
+	enum CTCARDS model;
+};
+
+int create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type,
+		  enum CTCARDS model, struct hw **rhw);
+int destroy_hw_obj(struct hw *hw);
+
+unsigned int get_field(unsigned int data, unsigned int field);
+void set_field(unsigned int *data, unsigned int field, unsigned int value);
+
+/* IRQ bits */
+#define	PLL_INT		(1 << 10) /* PLL input-clock out-of-range */
+#define FI_INT		(1 << 9)  /* forced interrupt */
+#define IT_INT		(1 << 8)  /* timer interrupt */
+#define PCI_INT		(1 << 7)  /* PCI bus error pending */
+#define URT_INT		(1 << 6)  /* UART Tx/Rx */
+#define GPI_INT		(1 << 5)  /* GPI pin */
+#define MIX_INT		(1 << 4)  /* mixer parameter segment FIFO channels */
+#define DAI_INT		(1 << 3)  /* DAI (SR-tracker or SPDIF-receiver) */
+#define TP_INT		(1 << 2)  /* transport priority queue */
+#define DSP_INT		(1 << 1)  /* DSP */
+#define SRC_INT		(1 << 0)  /* SRC channels */
+
+#endif /* CTHARDWARE_H */
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
new file mode 100644
index 00000000000..cb69d9ddfbe
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -0,0 +1,2248 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k1.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord for 20k1.
+ *
+ * @Author	Liu Chun
+ * @Date 	Jun 24 2008
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "cthw20k1.h"
+#include "ct20k1reg.h"
+
+#if BITS_PER_LONG == 32
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
+#else
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
+#endif
+
+struct hw20k1 {
+	struct hw hw;
+	spinlock_t reg_20k1_lock;
+	spinlock_t reg_pci_lock;
+};
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg);
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
+static u32 hw_read_pci(struct hw *hw, u32 reg);
+static void hw_write_pci(struct hw *hw, u32 reg, u32 data);
+
+/*
+ * Type definition block.
+ * The layout of control structures can be directly applied on 20k2 chip.
+ */
+
+/*
+ * SRC control block definitions.
+ */
+
+/* SRC resource control block */
+#define SRCCTL_STATE	0x00000007
+#define SRCCTL_BM	0x00000008
+#define SRCCTL_RSR	0x00000030
+#define SRCCTL_SF	0x000001C0
+#define SRCCTL_WR	0x00000200
+#define SRCCTL_PM	0x00000400
+#define SRCCTL_ROM	0x00001800
+#define SRCCTL_VO	0x00002000
+#define SRCCTL_ST	0x00004000
+#define SRCCTL_IE	0x00008000
+#define SRCCTL_ILSZ	0x000F0000
+#define SRCCTL_BP	0x00100000
+
+#define SRCCCR_CISZ	0x000007FF
+#define SRCCCR_CWA	0x001FF800
+#define SRCCCR_D	0x00200000
+#define SRCCCR_RS	0x01C00000
+#define SRCCCR_NAL	0x3E000000
+#define SRCCCR_RA	0xC0000000
+
+#define SRCCA_CA	0x03FFFFFF
+#define SRCCA_RS	0x1C000000
+#define SRCCA_NAL	0xE0000000
+
+#define SRCSA_SA	0x03FFFFFF
+
+#define SRCLA_LA	0x03FFFFFF
+
+/* Mixer Parameter Ring ram Low and Hight register.
+ * Fixed-point value in 8.24 format for parameter channel */
+#define MPRLH_PITCH	0xFFFFFFFF
+
+/* SRC resource register dirty flags */
+union src_dirty {
+	struct {
+		u16 ctl:1;
+		u16 ccr:1;
+		u16 sa:1;
+		u16 la:1;
+		u16 ca:1;
+		u16 mpr:1;
+		u16 czbfs:1;	/* Clear Z-Buffers */
+		u16 rsv:9;
+	} bf;
+	u16 data;
+};
+
+struct src_rsc_ctrl_blk {
+	unsigned int	ctl;
+	unsigned int 	ccr;
+	unsigned int	ca;
+	unsigned int	sa;
+	unsigned int	la;
+	unsigned int	mpr;
+	union src_dirty	dirty;
+};
+
+/* SRC manager control block */
+union src_mgr_dirty {
+	struct {
+		u16 enb0:1;
+		u16 enb1:1;
+		u16 enb2:1;
+		u16 enb3:1;
+		u16 enb4:1;
+		u16 enb5:1;
+		u16 enb6:1;
+		u16 enb7:1;
+		u16 enbsa:1;
+		u16 rsv:7;
+	} bf;
+	u16 data;
+};
+
+struct src_mgr_ctrl_blk {
+	unsigned int		enbsa;
+	unsigned int		enb[8];
+	union src_mgr_dirty	dirty;
+};
+
+/* SRCIMP manager control block */
+#define SRCAIM_ARC	0x00000FFF
+#define SRCAIM_NXT	0x00FF0000
+#define SRCAIM_SRC	0xFF000000
+
+struct srcimap {
+	unsigned int srcaim;
+	unsigned int idx;
+};
+
+/* SRCIMP manager register dirty flags */
+union srcimp_mgr_dirty {
+	struct {
+		u16 srcimap:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+struct srcimp_mgr_ctrl_blk {
+	struct srcimap		srcimap;
+	union srcimp_mgr_dirty	dirty;
+};
+
+/*
+ * Function implementation block.
+ */
+
+static int src_get_rsc_ctrl_blk(void **rblk)
+{
+	struct src_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_put_rsc_ctrl_blk(void *blk)
+{
+	kfree((struct src_rsc_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int src_set_state(void *blk, unsigned int state)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_STATE, state);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bm(void *blk, unsigned int bm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BM, bm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rsr(void *blk, unsigned int rsr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_RSR, rsr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_sf(void *blk, unsigned int sf)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_SF, sf);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_wr(void *blk, unsigned int wr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_WR, wr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_pm(void *blk, unsigned int pm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_PM, pm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rom(void *blk, unsigned int rom)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ROM, rom);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_vo(void *blk, unsigned int vo)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_VO, vo);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_st(void *blk, unsigned int st)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ST, st);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ie(void *blk, unsigned int ie)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_IE, ie);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ilsz(void *blk, unsigned int ilsz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bp(void *blk, unsigned int bp)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BP, bp);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_cisz(void *blk, unsigned int cisz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ccr, SRCCCR_CISZ, cisz);
+	ctl->dirty.bf.ccr = 1;
+	return 0;
+}
+
+static int src_set_ca(void *blk, unsigned int ca)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ca, SRCCA_CA, ca);
+	ctl->dirty.bf.ca = 1;
+	return 0;
+}
+
+static int src_set_sa(void *blk, unsigned int sa)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->sa, SRCSA_SA, sa);
+	ctl->dirty.bf.sa = 1;
+	return 0;
+}
+
+static int src_set_la(void *blk, unsigned int la)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->la, SRCLA_LA, la);
+	ctl->dirty.bf.la = 1;
+	return 0;
+}
+
+static int src_set_pitch(void *blk, unsigned int pitch)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->mpr, MPRLH_PITCH, pitch);
+	ctl->dirty.bf.mpr = 1;
+	return 0;
+}
+
+static int src_set_clear_zbufs(void *blk, unsigned int clear)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0);
+	return 0;
+}
+
+static int src_set_dirty(void *blk, unsigned int flags)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int src_set_dirty_all(void *blk)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+#define AR_SLOT_SIZE		4096
+#define AR_SLOT_BLOCK_SIZE	16
+#define AR_PTS_PITCH		6
+#define AR_PARAM_SRC_OFFSET	0x60
+
+static unsigned int src_param_pitch_mixer(unsigned int src_idx)
+{
+	return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE
+			- AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE;
+
+}
+
+static int src_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.czbfs) {
+		/* Clear Z-Buffer registers */
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRCUPZ+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 4; i++)
+			hw_write_20kx(hw, SRCDN0Z+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRCDN1Z+idx*0x100+i*0x4, 0);
+
+		ctl->dirty.bf.czbfs = 0;
+	}
+	if (ctl->dirty.bf.mpr) {
+		/* Take the parameter mixer resource in the same group as that
+		 * the idx src is in for simplicity. Unlike src, all conjugate
+		 * parameter mixer resources must be programmed for
+		 * corresponding conjugate src resources. */
+		unsigned int pm_idx = src_param_pitch_mixer(idx);
+		hw_write_20kx(hw, PRING_LO_HI+4*pm_idx, ctl->mpr);
+		hw_write_20kx(hw, PMOPLO+8*pm_idx, 0x3);
+		hw_write_20kx(hw, PMOPHI+8*pm_idx, 0x0);
+		ctl->dirty.bf.mpr = 0;
+	}
+	if (ctl->dirty.bf.sa) {
+		hw_write_20kx(hw, SRCSA+idx*0x100, ctl->sa);
+		ctl->dirty.bf.sa = 0;
+	}
+	if (ctl->dirty.bf.la) {
+		hw_write_20kx(hw, SRCLA+idx*0x100, ctl->la);
+		ctl->dirty.bf.la = 0;
+	}
+	if (ctl->dirty.bf.ca) {
+		hw_write_20kx(hw, SRCCA+idx*0x100, ctl->ca);
+		ctl->dirty.bf.ca = 0;
+	}
+
+	/* Write srccf register */
+	hw_write_20kx(hw, SRCCF+idx*0x100, 0x0);
+
+	if (ctl->dirty.bf.ccr) {
+		hw_write_20kx(hw, SRCCCR+idx*0x100, ctl->ccr);
+		ctl->dirty.bf.ccr = 0;
+	}
+	if (ctl->dirty.bf.ctl) {
+		hw_write_20kx(hw, SRCCTL+idx*0x100, ctl->ctl);
+		ctl->dirty.bf.ctl = 0;
+	}
+
+	return 0;
+}
+
+static int src_get_ca(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	ctl->ca = hw_read_20kx(hw, SRCCA+idx*0x100);
+	ctl->dirty.bf.ca = 0;
+
+	return get_field(ctl->ca, SRCCA_CA);
+}
+
+static unsigned int src_get_dirty(void *blk)
+{
+	return ((struct src_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static unsigned int src_dirty_conj_mask(void)
+{
+	return 0x20;
+}
+
+static int src_mgr_enbs_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enbsa = ~(0x0);
+	((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1;
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	return 0;
+}
+
+static int src_mgr_enb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_dsb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct src_mgr_ctrl_blk *ctl = blk;
+	int i;
+	unsigned int ret;
+
+	if (ctl->dirty.bf.enbsa) {
+		do {
+			ret = hw_read_20kx(hw, SRCENBSTAT);
+		} while (ret & 0x1);
+		hw_write_20kx(hw, SRCENBS, ctl->enbsa);
+		ctl->dirty.bf.enbsa = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.data & (0x1 << i))) {
+			hw_write_20kx(hw, SRCENB+(i*0x100), ctl->enb[i]);
+			ctl->dirty.data &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static int src_mgr_get_ctrl_blk(void **rblk)
+{
+	struct src_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct src_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_get_ctrl_blk(void **rblk)
+{
+	struct srcimp_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int srcimp_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct srcimp_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapuser(void *blk, unsigned int user)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	ctl->srcimap.idx = addr;
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srcimap) {
+		hw_write_20kx(hw, SRCIMAP+ctl->srcimap.idx*0x100,
+						ctl->srcimap.srcaim);
+		ctl->dirty.bf.srcimap = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * AMIXER control block definitions.
+ */
+
+#define AMOPLO_M	0x00000003
+#define AMOPLO_X	0x0003FFF0
+#define AMOPLO_Y	0xFFFC0000
+
+#define AMOPHI_SADR	0x000000FF
+#define AMOPHI_SE	0x80000000
+
+/* AMIXER resource register dirty flags */
+union amixer_dirty {
+	struct {
+		u16 amoplo:1;
+		u16 amophi:1;
+		u16 rsv:14;
+	} bf;
+	u16 data;
+};
+
+/* AMIXER resource control block */
+struct amixer_rsc_ctrl_blk {
+	unsigned int		amoplo;
+	unsigned int		amophi;
+	union amixer_dirty	dirty;
+};
+
+static int amixer_set_mode(void *blk, unsigned int mode)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_M, mode);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_iv(void *blk, unsigned int iv)
+{
+	/* 20k1 amixer does not have this field */
+	return 0;
+}
+
+static int amixer_set_x(void *blk, unsigned int x)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_X, x);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_y(void *blk, unsigned int y)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_Y, y);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_sadr(void *blk, unsigned int sadr)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SADR, sadr);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_se(void *blk, unsigned int se)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SE, se);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_dirty(void *blk, unsigned int flags)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int amixer_set_dirty_all(void *blk)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) {
+		hw_write_20kx(hw, AMOPLO+idx*8, ctl->amoplo);
+		ctl->dirty.bf.amoplo = 0;
+		hw_write_20kx(hw, AMOPHI+idx*8, ctl->amophi);
+		ctl->dirty.bf.amophi = 0;
+	}
+
+	return 0;
+}
+
+static int amixer_get_y(void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	return get_field(ctl->amoplo, AMOPLO_Y);
+}
+
+static unsigned int amixer_get_dirty(void *blk)
+{
+	return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static int amixer_rsc_get_ctrl_blk(void **rblk)
+{
+	struct amixer_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int amixer_rsc_put_ctrl_blk(void *blk)
+{
+	kfree((struct amixer_rsc_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int amixer_mgr_get_ctrl_blk(void **rblk)
+{
+	/*amixer_mgr_ctrl_blk_t *blk;*/
+
+	*rblk = NULL;
+	/*blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;*/
+
+	return 0;
+}
+
+static int amixer_mgr_put_ctrl_blk(void *blk)
+{
+	/*kfree((amixer_mgr_ctrl_blk_t *)blk);*/
+
+	return 0;
+}
+
+/*
+ * DAIO control block definitions.
+ */
+
+/* Receiver Sample Rate Tracker Control register */
+#define SRTCTL_SRCR	0x000000FF
+#define SRTCTL_SRCL	0x0000FF00
+#define SRTCTL_RSR	0x00030000
+#define SRTCTL_DRAT	0x000C0000
+#define SRTCTL_RLE	0x10000000
+#define SRTCTL_RLP	0x20000000
+#define SRTCTL_EC	0x40000000
+#define SRTCTL_ET	0x80000000
+
+/* DAIO Receiver register dirty flags */
+union dai_dirty {
+	struct {
+		u16 srtctl:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* DAIO Receiver control block */
+struct dai_ctrl_blk {
+	unsigned int	srtctl;
+	union dai_dirty	dirty;
+};
+
+/* S/PDIF Transmitter register dirty flags */
+union dao_dirty {
+	struct {
+		u16 spos:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* S/PDIF Transmitter control block */
+struct dao_ctrl_blk {
+	unsigned int 	spos; /* S/PDIF Output Channel Status Register */
+	union dao_dirty	dirty;
+};
+
+/* Audio Input Mapper RAM */
+#define AIM_ARC		0x00000FFF
+#define AIM_NXT		0x007F0000
+
+struct daoimap {
+	unsigned int aim;
+	unsigned int idx;
+};
+
+/* I2S Transmitter/Receiver Control register */
+#define I2SCTL_EA	0x00000004
+#define I2SCTL_EI	0x00000010
+
+/* S/PDIF Transmitter Control register */
+#define SPOCTL_OE	0x00000001
+#define SPOCTL_OS	0x0000000E
+#define SPOCTL_RIV	0x00000010
+#define SPOCTL_LIV	0x00000020
+#define SPOCTL_SR	0x000000C0
+
+/* S/PDIF Receiver Control register */
+#define SPICTL_EN	0x00000001
+#define SPICTL_I24	0x00000002
+#define SPICTL_IB	0x00000004
+#define SPICTL_SM	0x00000008
+#define SPICTL_VM	0x00000010
+
+/* DAIO manager register dirty flags */
+union daio_mgr_dirty {
+	struct {
+		u32 i2soctl:4;
+		u32 i2sictl:4;
+		u32 spoctl:4;
+		u32 spictl:4;
+		u32 daoimap:1;
+		u32 rsv:15;
+	} bf;
+	u32 data;
+};
+
+/* DAIO manager control block */
+struct daio_mgr_ctrl_blk {
+	unsigned int		i2sctl;
+	unsigned int		spoctl;
+	unsigned int		spictl;
+	struct daoimap		daoimap;
+	union daio_mgr_dirty	dirty;
+};
+
+static int dai_srt_set_srcr(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_SRCR, src);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_srcl(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_SRCL, src);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_rsr(void *blk, unsigned int rsr)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_RSR, rsr);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_drat(void *blk, unsigned int drat)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_DRAT, drat);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_ec(void *blk, unsigned int ec)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_EC, ec ? 1 : 0);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_et(void *blk, unsigned int et)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_ET, et ? 1 : 0);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srtctl) {
+		if (idx < 4) {
+			/* S/PDIF SRTs */
+			hw_write_20kx(hw, SRTSCTL+0x4*idx, ctl->srtctl);
+		} else {
+			/* I2S SRT */
+			hw_write_20kx(hw, SRTICTL, ctl->srtctl);
+		}
+		ctl->dirty.bf.srtctl = 0;
+	}
+
+	return 0;
+}
+
+static int dai_get_ctrl_blk(void **rblk)
+{
+	struct dai_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dai_put_ctrl_blk(void *blk)
+{
+	kfree((struct dai_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int dao_set_spos(void *blk, unsigned int spos)
+{
+	((struct dao_ctrl_blk *)blk)->spos = spos;
+	((struct dao_ctrl_blk *)blk)->dirty.bf.spos = 1;
+	return 0;
+}
+
+static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dao_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.spos) {
+		if (idx < 4) {
+			/* S/PDIF SPOSx */
+			hw_write_20kx(hw, SPOS+0x4*idx, ctl->spos);
+		}
+		ctl->dirty.bf.spos = 0;
+	}
+
+	return 0;
+}
+
+static int dao_get_spos(void *blk, unsigned int *spos)
+{
+	*spos = ((struct dao_ctrl_blk *)blk)->spos;
+	return 0;
+}
+
+static int dao_get_ctrl_blk(void **rblk)
+{
+	struct dao_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dao_put_ctrl_blk(void *blk)
+{
+	kfree((struct dao_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int daio_mgr_enb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF input */
+		set_field(&ctl->spictl, SPICTL_EN << (idx*8), 1);
+		ctl->dirty.bf.spictl |= (0x1 << idx);
+	} else {
+		/* I2S input */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 1);
+		ctl->dirty.bf.i2sictl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF input */
+		set_field(&ctl->spictl, SPICTL_EN << (idx*8), 0);
+		ctl->dirty.bf.spictl |= (0x1 << idx);
+	} else {
+		/* I2S input */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 0);
+		ctl->dirty.bf.i2sictl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_enb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 1);
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 1);
+		ctl->dirty.bf.i2soctl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 0);
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 0);
+		ctl->dirty.bf.i2soctl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		switch ((conf & 0x7)) {
+		case 0:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 3);
+			break; /* CDIF */
+		case 1:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 0);
+			break;
+		case 2:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 1);
+			break;
+		case 4:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 2);
+			break;
+		default:
+			break;
+		}
+		set_field(&ctl->spoctl, SPOCTL_LIV << (idx*8),
+			  (conf >> 4) & 0x1); /* Non-audio */
+		set_field(&ctl->spoctl, SPOCTL_RIV << (idx*8),
+			  (conf >> 4) & 0x1); /* Non-audio */
+		set_field(&ctl->spoctl, SPOCTL_OS << (idx*8),
+			  ((conf >> 3) & 0x1) ? 2 : 2); /* Raw */
+
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		/*idx %= 4; */
+	}
+	return 0;
+}
+
+static int daio_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_ARC, slot);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_NXT, next);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	ctl->daoimap.idx = addr;
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.i2sictl || ctl->dirty.bf.i2soctl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.i2sictl & (0x1 << i)))
+				ctl->dirty.bf.i2sictl &= ~(0x1 << i);
+
+			if ((ctl->dirty.bf.i2soctl & (0x1 << i)))
+				ctl->dirty.bf.i2soctl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, I2SCTL, ctl->i2sctl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.spoctl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.spoctl & (0x1 << i)))
+				ctl->dirty.bf.spoctl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, SPOCTL, ctl->spoctl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.spictl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.spictl & (0x1 << i)))
+				ctl->dirty.bf.spictl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, SPICTL, ctl->spictl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.daoimap) {
+		hw_write_20kx(hw, DAOIMAP+ctl->daoimap.idx*4,
+					ctl->daoimap.aim);
+		ctl->dirty.bf.daoimap = 0;
+	}
+
+	return 0;
+}
+
+static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
+{
+	struct daio_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	blk->i2sctl = hw_read_20kx(hw, I2SCTL);
+	blk->spoctl = hw_read_20kx(hw, SPOCTL);
+	blk->spictl = hw_read_20kx(hw, SPICTL);
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int daio_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct daio_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+/* Timer interrupt */
+static int set_timer_irq(struct hw *hw, int enable)
+{
+	hw_write_20kx(hw, GIE, enable ? IT_INT : 0);
+	return 0;
+}
+
+static int set_timer_tick(struct hw *hw, unsigned int ticks)
+{
+	if (ticks)
+		ticks |= TIMR_IE | TIMR_IP;
+	hw_write_20kx(hw, TIMR, ticks);
+	return 0;
+}
+
+static unsigned int get_wc(struct hw *hw)
+{
+	return hw_read_20kx(hw, WC);
+}
+
+/* Card hardware initialization block */
+struct dac_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct adc_conf {
+	unsigned int msr; 	/* master sample rate in rsrs */
+	unsigned char input; 	/* the input source of ADC */
+	unsigned char mic20db; 	/* boost mic by 20db if input is microphone */
+};
+
+struct daio_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct trn_conf {
+	unsigned long vm_pgt_phys;
+};
+
+static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
+{
+	u32 i2sorg;
+	u32 spdorg;
+
+	/* Read I2S CTL.  Keep original value. */
+	/*i2sorg = hw_read_20kx(hw, I2SCTL);*/
+	i2sorg = 0x94040404; /* enable all audio out and I2S-D input */
+	/* Program I2S with proper master sample rate and enable
+	 * the correct I2S channel. */
+	i2sorg &= 0xfffffffc;
+
+	/* Enable S/PDIF-out-A in fixed 24-bit data
+	 * format and default to 48kHz. */
+	/* Disable all before doing any changes. */
+	hw_write_20kx(hw, SPOCTL, 0x0);
+	spdorg = 0x05;
+
+	switch (info->msr) {
+	case 1:
+		i2sorg |= 1;
+		spdorg |= (0x0 << 6);
+		break;
+	case 2:
+		i2sorg |= 2;
+		spdorg |= (0x1 << 6);
+		break;
+	case 4:
+		i2sorg |= 3;
+		spdorg |= (0x2 << 6);
+		break;
+	default:
+		i2sorg |= 1;
+		break;
+	}
+
+	hw_write_20kx(hw, I2SCTL, i2sorg);
+	hw_write_20kx(hw, SPOCTL, spdorg);
+
+	/* Enable S/PDIF-in-A in fixed 24-bit data format. */
+	/* Disable all before doing any changes. */
+	hw_write_20kx(hw, SPICTL, 0x0);
+	mdelay(1);
+	spdorg = 0x0a0a0a0a;
+	hw_write_20kx(hw, SPICTL, spdorg);
+	mdelay(1);
+
+	return 0;
+}
+
+/* TRANSPORT operations */
+static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
+{
+	u32 trnctl;
+	u32 ptp_phys_low, ptp_phys_high;
+
+	/* Set up device page table */
+	if ((~0UL) == info->vm_pgt_phys) {
+		printk(KERN_ERR "Wrong device page table page address!\n");
+		return -1;
+	}
+
+	trnctl = 0x13;  /* 32-bit, 4k-size page */
+	ptp_phys_low = (u32)info->vm_pgt_phys;
+	ptp_phys_high = upper_32_bits(info->vm_pgt_phys);
+	if (sizeof(void *) == 8) /* 64bit address */
+		trnctl |= (1 << 2);
+#if 0 /* Only 4k h/w pages for simplicitiy */
+#if PAGE_SIZE == 8192
+	trnctl |= (1<<5);
+#endif
+#endif
+	hw_write_20kx(hw, PTPALX, ptp_phys_low);
+	hw_write_20kx(hw, PTPAHX, ptp_phys_high);
+	hw_write_20kx(hw, TRNCTL, trnctl);
+	hw_write_20kx(hw, TRNIS, 0x200c01); /* realy needed? */
+
+	return 0;
+}
+
+/* Card initialization */
+#define GCTL_EAC	0x00000001
+#define GCTL_EAI	0x00000002
+#define GCTL_BEP	0x00000004
+#define GCTL_BES	0x00000008
+#define GCTL_DSP	0x00000010
+#define GCTL_DBP	0x00000020
+#define GCTL_ABP	0x00000040
+#define GCTL_TBP	0x00000080
+#define GCTL_SBP	0x00000100
+#define GCTL_FBP	0x00000200
+#define GCTL_XA		0x00000400
+#define GCTL_ET		0x00000800
+#define GCTL_PR		0x00001000
+#define GCTL_MRL	0x00002000
+#define GCTL_SDE	0x00004000
+#define GCTL_SDI	0x00008000
+#define GCTL_SM		0x00010000
+#define GCTL_SR		0x00020000
+#define GCTL_SD		0x00040000
+#define GCTL_SE		0x00080000
+#define GCTL_AID	0x00100000
+
+static int hw_pll_init(struct hw *hw, unsigned int rsr)
+{
+	unsigned int pllctl;
+	int i;
+
+	pllctl = (48000 == rsr) ? 0x1480a001 : 0x1480a731;
+	for (i = 0; i < 3; i++) {
+		if (hw_read_20kx(hw, PLLCTL) == pllctl)
+			break;
+
+		hw_write_20kx(hw, PLLCTL, pllctl);
+		mdelay(40);
+	}
+	if (i >= 3) {
+		printk(KERN_ALERT "PLL initialization failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int hw_auto_init(struct hw *hw)
+{
+	unsigned int gctl;
+	int i;
+
+	gctl = hw_read_20kx(hw, GCTL);
+	set_field(&gctl, GCTL_EAI, 0);
+	hw_write_20kx(hw, GCTL, gctl);
+	set_field(&gctl, GCTL_EAI, 1);
+	hw_write_20kx(hw, GCTL, gctl);
+	mdelay(10);
+	for (i = 0; i < 400000; i++) {
+		gctl = hw_read_20kx(hw, GCTL);
+		if (get_field(gctl, GCTL_AID))
+			break;
+	}
+	if (!get_field(gctl, GCTL_AID)) {
+		printk(KERN_ALERT "Card Auto-init failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int i2c_unlock(struct hw *hw)
+{
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	hw_write_pci(hw, 0xcc, 0x8c);
+	hw_write_pci(hw, 0xcc, 0x0e);
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	hw_write_pci(hw, 0xcc, 0xee);
+	hw_write_pci(hw, 0xcc, 0xaa);
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	return -1;
+}
+
+static void i2c_lock(struct hw *hw)
+{
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		hw_write_pci(hw, 0xcc, 0x00);
+}
+
+static void i2c_write(struct hw *hw, u32 device, u32 addr, u32 data)
+{
+	unsigned int ret;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+	hw_write_pci(hw, 0xE0, device);
+	hw_write_pci(hw, 0xE4, (data << 8) | (addr & 0xff));
+}
+
+/* DAC operations */
+
+static int hw_reset_dac(struct hw *hw)
+{
+	u32 i;
+	u16 gpioorg;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+
+	/* To be effective, need to reset the DAC twice. */
+	for (i = 0; i < 2;  i++) {
+		/* set gpio */
+		mdelay(100);
+		gpioorg = (u16)hw_read_20kx(hw, GPIO);
+		gpioorg &= 0xfffd;
+		hw_write_20kx(hw, GPIO, gpioorg);
+		mdelay(1);
+		hw_write_20kx(hw, GPIO, gpioorg | 0x2);
+	}
+
+	i2c_write(hw, 0x00180080, 0x01, 0x80);
+	i2c_write(hw, 0x00180080, 0x02, 0x10);
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
+{
+	u32 data;
+	u16 gpioorg;
+	unsigned int ret;
+
+	if (hw->model == CTSB055X) {
+		/* SB055x, unmute outputs */
+		gpioorg = (u16)hw_read_20kx(hw, GPIO);
+		gpioorg &= 0xffbf;	/* set GPIO6 to low */
+		gpioorg |= 2;		/* set GPIO1 to high */
+		hw_write_20kx(hw, GPIO, gpioorg);
+		return 0;
+	}
+
+	/* mute outputs */
+	gpioorg = (u16)hw_read_20kx(hw, GPIO);
+	gpioorg &= 0xffbf;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	hw_reset_dac(hw);
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+
+	switch (info->msr) {
+	case 1:
+		data = 0x24;
+		break;
+	case 2:
+		data = 0x25;
+		break;
+	case 4:
+		data = 0x26;
+		break;
+	default:
+		data = 0x24;
+		break;
+	}
+
+	i2c_write(hw, 0x00180080, 0x06, data);
+	i2c_write(hw, 0x00180080, 0x09, data);
+	i2c_write(hw, 0x00180080, 0x0c, data);
+	i2c_write(hw, 0x00180080, 0x0f, data);
+
+	i2c_lock(hw);
+
+	/* unmute outputs */
+	gpioorg = (u16)hw_read_20kx(hw, GPIO);
+	gpioorg = gpioorg | 0x40;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	return 0;
+}
+
+/* ADC operations */
+
+static int is_adc_input_selected_SB055x(struct hw *hw, enum ADCSRC type)
+{
+	return 0;
+}
+
+static int is_adc_input_selected_SBx(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data = ((data & (0x1<<7)) && (data & (0x1<<8)));
+		break;
+	case ADC_LINEIN:
+		data = (!(data & (0x1<<7)) && (data & (0x1<<8)));
+		break;
+	case ADC_NONE: /* Digital I/O */
+		data = (!(data & (0x1<<8)));
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int is_adc_input_selected_hendrix(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data = (data & (0x1 << 7)) ? 1 : 0;
+		break;
+	case ADC_LINEIN:
+		data = (data & (0x1 << 7)) ? 0 : 1;
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
+{
+	switch (hw->model) {
+	case CTSB055X:
+		return is_adc_input_selected_SB055x(hw, type);
+	case CTSB073X:
+		return is_adc_input_selected_hendrix(hw, type);
+	case CTUAA:
+		return is_adc_input_selected_hendrix(hw, type);
+	default:
+		return is_adc_input_selected_SBx(hw, type);
+	}
+}
+
+static int
+adc_input_select_SB055x(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+
+	/*
+	 * check and set the following GPIO bits accordingly
+	 * ADC_Gain		= GPIO2
+	 * DRM_off		= GPIO3
+	 * Mic_Pwr_on		= GPIO7
+	 * Digital_IO_Sel	= GPIO8
+	 * Mic_Sw		= GPIO9
+	 * Aux/MicLine_Sw	= GPIO12
+	 */
+	data = hw_read_20kx(hw, GPIO);
+	data &= 0xec73;
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1<<7) | (0x1<<8) | (0x1<<9) ;
+		data |= boost ? (0x1<<2) : 0;
+		break;
+	case ADC_LINEIN:
+		data |= (0x1<<8);
+		break;
+	case ADC_AUX:
+		data |= (0x1<<8) | (0x1<<12);
+		break;
+	case ADC_NONE:
+		data |= (0x1<<12);  /* set to digital */
+		break;
+	default:
+		return -1;
+	}
+
+	hw_write_20kx(hw, GPIO, data);
+
+	return 0;
+}
+
+
+static int
+adc_input_select_SBx(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+	u32 i2c_data;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	/* set i2c access mode as Direct Control */
+	hw_write_pci(hw, 0xEC, 0x05);
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data |= ((0x1 << 7) | (0x1 << 8));
+		i2c_data = 0x1;  /* Mic-in */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 7);
+		data |= (0x1 << 8);
+		i2c_data = 0x2; /* Line-in */
+		break;
+	case ADC_NONE:
+		data &= ~(0x1 << 8);
+		i2c_data = 0x0; /* set to Digital */
+		break;
+	default:
+		i2c_lock(hw);
+		return -1;
+	}
+	hw_write_20kx(hw, GPIO, data);
+	i2c_write(hw, 0x001a0080, 0x2a, i2c_data);
+	if (boost) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */
+	}
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int
+adc_input_select_hendrix(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+	u32 i2c_data;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	/* set i2c access mode as Direct Control */
+	hw_write_pci(hw, 0xEC, 0x05);
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1 << 7);
+		i2c_data = 0x1;  /* Mic-in */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 7);
+		i2c_data = 0x2; /* Line-in */
+		break;
+	default:
+		i2c_lock(hw);
+		return -1;
+	}
+	hw_write_20kx(hw, GPIO, data);
+	i2c_write(hw, 0x001a0080, 0x2a, i2c_data);
+	if (boost) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */
+	}
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
+{
+	int state = type == ADC_MICIN;
+
+	switch (hw->model) {
+	case CTSB055X:
+		return adc_input_select_SB055x(hw, type, state);
+	case CTSB073X:
+		return adc_input_select_hendrix(hw, type, state);
+	case CTUAA:
+		return adc_input_select_hendrix(hw, type, state);
+	default:
+		return adc_input_select_SBx(hw, type, state);
+	}
+}
+
+static int adc_init_SB055x(struct hw *hw, int input, int mic20db)
+{
+	return adc_input_select_SB055x(hw, input, mic20db);
+}
+
+static int adc_init_SBx(struct hw *hw, int input, int mic20db)
+{
+	u16 gpioorg;
+	u16 input_source;
+	u32 adcdata;
+	unsigned int ret;
+
+	input_source = 0x100;  /* default to analog */
+	switch (input) {
+	case ADC_MICIN:
+		adcdata = 0x1;
+		input_source = 0x180;  /* set GPIO7 to select Mic */
+		break;
+	case ADC_LINEIN:
+		adcdata = 0x2;
+		break;
+	case ADC_VIDEO:
+		adcdata = 0x4;
+		break;
+	case ADC_AUX:
+		adcdata = 0x8;
+		break;
+	case ADC_NONE:
+		adcdata = 0x0;
+		input_source = 0x0;  /* set to Digital */
+		break;
+	default:
+		adcdata = 0x0;
+		break;
+	}
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+
+	i2c_write(hw, 0x001a0080, 0x0e, 0x08);
+	i2c_write(hw, 0x001a0080, 0x18, 0x0a);
+	i2c_write(hw, 0x001a0080, 0x28, 0x86);
+	i2c_write(hw, 0x001a0080, 0x2a, adcdata);
+
+	if (mic20db) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xf7);
+		i2c_write(hw, 0x001a0080, 0x1e, 0xf7);
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf);
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf);
+	}
+
+	if (!(hw_read_20kx(hw, ID0) & 0x100))
+		i2c_write(hw, 0x001a0080, 0x16, 0x26);
+
+	i2c_lock(hw);
+
+	gpioorg = (u16)hw_read_20kx(hw,  GPIO);
+	gpioorg &= 0xfe7f;
+	gpioorg |= input_source;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	return 0;
+}
+
+static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
+{
+	if (hw->model == CTSB055X)
+		return adc_init_SB055x(hw, info->input, info->mic20db);
+	else
+		return adc_init_SBx(hw, info->input, info->mic20db);
+}
+
+static int hw_have_digit_io_switch(struct hw *hw)
+{
+	/* SB073x and Vista compatible cards have no digit IO switch */
+	return !(hw->model == CTSB073X || hw->model == CTUAA);
+}
+
+#define CTLBITS(a, b, c, d)	(((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
+
+#define UAA_CFG_PWRSTATUS	0x44
+#define UAA_CFG_SPACE_FLAG	0xA0
+#define UAA_CORE_CHANGE		0x3FFC
+static int uaa_to_xfi(struct pci_dev *pci)
+{
+	unsigned int bar0, bar1, bar2, bar3, bar4, bar5;
+	unsigned int cmd, irq, cl_size, l_timer, pwr;
+	unsigned int is_uaa;
+	unsigned int data[4] = {0};
+	unsigned int io_base;
+	void *mem_base;
+	int i;
+	const u32 CTLX = CTLBITS('C', 'T', 'L', 'X');
+	const u32 CTL_ = CTLBITS('C', 'T', 'L', '-');
+	const u32 CTLF = CTLBITS('C', 'T', 'L', 'F');
+	const u32 CTLi = CTLBITS('C', 'T', 'L', 'i');
+	const u32 CTLA = CTLBITS('C', 'T', 'L', 'A');
+	const u32 CTLZ = CTLBITS('C', 'T', 'L', 'Z');
+	const u32 CTLL = CTLBITS('C', 'T', 'L', 'L');
+
+	/* By default, Hendrix card UAA Bar0 should be using memory... */
+	io_base = pci_resource_start(pci, 0);
+	mem_base = ioremap(io_base, pci_resource_len(pci, 0));
+	if (NULL == mem_base)
+		return -ENOENT;
+
+	/* Read current mode from Mode Change Register */
+	for (i = 0; i < 4; i++)
+		data[i] = readl(mem_base + UAA_CORE_CHANGE);
+
+	/* Determine current mode... */
+	if (data[0] == CTLA) {
+		is_uaa = ((data[1] == CTLZ && data[2] == CTLL
+			  && data[3] == CTLA) || (data[1] == CTLA
+			  && data[2] == CTLZ && data[3] == CTLL));
+	} else if (data[0] == CTLZ) {
+		is_uaa = (data[1] == CTLL
+				&& data[2] == CTLA && data[3] == CTLA);
+	} else if (data[0] == CTLL) {
+		is_uaa = (data[1] == CTLA
+				&& data[2] == CTLA && data[3] == CTLZ);
+	} else {
+		is_uaa = 0;
+	}
+
+	if (!is_uaa) {
+		/* Not in UAA mode currently. Return directly. */
+		iounmap(mem_base);
+		return 0;
+	}
+
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_0, &bar0);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_1, &bar1);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_2, &bar2);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_3, &bar3);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_4, &bar4);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_5, &bar5);
+	pci_read_config_dword(pci, PCI_INTERRUPT_LINE, &irq);
+	pci_read_config_dword(pci, PCI_CACHE_LINE_SIZE, &cl_size);
+	pci_read_config_dword(pci, PCI_LATENCY_TIMER, &l_timer);
+	pci_read_config_dword(pci, UAA_CFG_PWRSTATUS, &pwr);
+	pci_read_config_dword(pci, PCI_COMMAND, &cmd);
+
+	/* Set up X-Fi core PCI configuration space. */
+	/* Switch to X-Fi config space with BAR0 exposed. */
+	pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x87654321);
+	/* Copy UAA's BAR5 into X-Fi BAR0 */
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_0, bar5);
+	/* Switch to X-Fi config space without BAR0 exposed. */
+	pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x12345678);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, bar1);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_2, bar2);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_3, bar3);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_4, bar4);
+	pci_write_config_dword(pci, PCI_INTERRUPT_LINE, irq);
+	pci_write_config_dword(pci, PCI_CACHE_LINE_SIZE, cl_size);
+	pci_write_config_dword(pci, PCI_LATENCY_TIMER, l_timer);
+	pci_write_config_dword(pci, UAA_CFG_PWRSTATUS, pwr);
+	pci_write_config_dword(pci, PCI_COMMAND, cmd);
+
+	/* Switch to X-Fi mode */
+	writel(CTLX, (mem_base + UAA_CORE_CHANGE));
+	writel(CTL_, (mem_base + UAA_CORE_CHANGE));
+	writel(CTLF, (mem_base + UAA_CORE_CHANGE));
+	writel(CTLi, (mem_base + UAA_CORE_CHANGE));
+
+	iounmap(mem_base);
+
+	return 0;
+}
+
+static irqreturn_t ct_20k1_interrupt(int irq, void *dev_id)
+{
+	struct hw *hw = dev_id;
+	unsigned int status;
+
+	status = hw_read_20kx(hw, GIP);
+	if (!status)
+		return IRQ_NONE;
+
+	if (hw->irq_callback)
+		hw->irq_callback(hw->irq_callback_data, status);
+
+	hw_write_20kx(hw, GIP, status);
+	return IRQ_HANDLED;
+}
+
+static int hw_card_start(struct hw *hw)
+{
+	int err;
+	struct pci_dev *pci = hw->pci;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	/* Set DMA transfer mask */
+	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
+		printk(KERN_ERR "architecture does not support PCI "
+				"busmaster DMA with mask 0x%llx\n",
+		       CT_XFI_DMA_MASK);
+		err = -ENXIO;
+		goto error1;
+	}
+
+	err = pci_request_regions(pci, "XFi");
+	if (err < 0)
+		goto error1;
+
+	/* Switch to X-Fi mode from UAA mode if neeeded */
+	if (hw->model == CTUAA) {
+		err = uaa_to_xfi(pci);
+		if (err)
+			goto error2;
+
+		hw->io_base = pci_resource_start(pci, 5);
+	} else {
+		hw->io_base = pci_resource_start(pci, 0);
+	}
+
+	err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
+			  "ctxfi", hw);
+	if (err < 0) {
+		printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+		goto error2;
+	}
+	hw->irq = pci->irq;
+
+	pci_set_master(pci);
+
+	return 0;
+
+error2:
+	pci_release_regions(pci);
+	hw->io_base = 0;
+error1:
+	pci_disable_device(pci);
+	return err;
+}
+
+static int hw_card_stop(struct hw *hw)
+{
+	/* TODO: Disable interrupt and so on... */
+	if (hw->irq >= 0)
+		synchronize_irq(hw->irq);
+	return 0;
+}
+
+static int hw_card_shutdown(struct hw *hw)
+{
+	if (hw->irq >= 0)
+		free_irq(hw->irq, hw);
+
+	hw->irq	= -1;
+
+	if (NULL != ((void *)hw->mem_base))
+		iounmap((void *)hw->mem_base);
+
+	hw->mem_base = (unsigned long)NULL;
+
+	if (hw->io_base)
+		pci_release_regions(hw->pci);
+
+	hw->io_base = 0;
+
+	pci_disable_device(hw->pci);
+
+	return 0;
+}
+
+static int hw_card_init(struct hw *hw, struct card_conf *info)
+{
+	int err;
+	unsigned int gctl;
+	u32 data;
+	struct dac_conf dac_info = {0};
+	struct adc_conf adc_info = {0};
+	struct daio_conf daio_info = {0};
+	struct trn_conf trn_info = {0};
+
+	/* Get PCI io port base address and do Hendrix switch if needed. */
+	if (!hw->io_base) {
+		err = hw_card_start(hw);
+		if (err)
+			return err;
+	}
+
+	/* PLL init */
+	err = hw_pll_init(hw, info->rsr);
+	if (err < 0)
+		return err;
+
+	/* kick off auto-init */
+	err = hw_auto_init(hw);
+	if (err < 0)
+		return err;
+
+	/* Enable audio ring */
+	gctl = hw_read_20kx(hw, GCTL);
+	set_field(&gctl, GCTL_EAC, 1);
+	set_field(&gctl, GCTL_DBP, 1);
+	set_field(&gctl, GCTL_TBP, 1);
+	set_field(&gctl, GCTL_FBP, 1);
+	set_field(&gctl, GCTL_ET, 1);
+	hw_write_20kx(hw, GCTL, gctl);
+	mdelay(10);
+
+	/* Reset all global pending interrupts */
+	hw_write_20kx(hw, GIE, 0);
+	/* Reset all SRC pending interrupts */
+	hw_write_20kx(hw, SRCIP, 0);
+	mdelay(30);
+
+	/* Detect the card ID and configure GPIO accordingly. */
+	switch (hw->model) {
+	case CTSB055X:
+		hw_write_20kx(hw, GPIOCTL, 0x13fe);
+		break;
+	case CTSB073X:
+		hw_write_20kx(hw, GPIOCTL, 0x00e6);
+		break;
+	case CTUAA:
+		hw_write_20kx(hw, GPIOCTL, 0x00c2);
+		break;
+	default:
+		hw_write_20kx(hw, GPIOCTL, 0x01e6);
+		break;
+	}
+
+	trn_info.vm_pgt_phys = info->vm_pgt_phys;
+	err = hw_trn_init(hw, &trn_info);
+	if (err < 0)
+		return err;
+
+	daio_info.msr = info->msr;
+	err = hw_daio_init(hw, &daio_info);
+	if (err < 0)
+		return err;
+
+	dac_info.msr = info->msr;
+	err = hw_dac_init(hw, &dac_info);
+	if (err < 0)
+		return err;
+
+	adc_info.msr = info->msr;
+	adc_info.input = ADC_LINEIN;
+	adc_info.mic20db = 0;
+	err = hw_adc_init(hw, &adc_info);
+	if (err < 0)
+		return err;
+
+	data = hw_read_20kx(hw, SRCMCTL);
+	data |= 0x1; /* Enables input from the audio ring */
+	hw_write_20kx(hw, SRCMCTL, data);
+
+	return 0;
+}
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg)
+{
+	u32 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+	outl(reg, hw->io_base + 0x0);
+	value = inl(hw->io_base + 0x4);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+
+	return value;
+}
+
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+	outl(reg, hw->io_base + 0x0);
+	outl(data, hw->io_base + 0x4);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+
+}
+
+static u32 hw_read_pci(struct hw *hw, u32 reg)
+{
+	u32 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+	outl(reg, hw->io_base + 0x10);
+	value = inl(hw->io_base + 0x14);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+
+	return value;
+}
+
+static void hw_write_pci(struct hw *hw, u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+	outl(reg, hw->io_base + 0x10);
+	outl(data, hw->io_base + 0x14);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+}
+
+static struct hw ct20k1_preset __devinitdata = {
+	.irq = -1,
+
+	.card_init = hw_card_init,
+	.card_stop = hw_card_stop,
+	.pll_init = hw_pll_init,
+	.is_adc_source_selected = hw_is_adc_input_selected,
+	.select_adc_source = hw_adc_input_select,
+	.have_digit_io_switch = hw_have_digit_io_switch,
+
+	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
+	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
+	.src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk,
+	.src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk,
+	.src_set_state = src_set_state,
+	.src_set_bm = src_set_bm,
+	.src_set_rsr = src_set_rsr,
+	.src_set_sf = src_set_sf,
+	.src_set_wr = src_set_wr,
+	.src_set_pm = src_set_pm,
+	.src_set_rom = src_set_rom,
+	.src_set_vo = src_set_vo,
+	.src_set_st = src_set_st,
+	.src_set_ie = src_set_ie,
+	.src_set_ilsz = src_set_ilsz,
+	.src_set_bp = src_set_bp,
+	.src_set_cisz = src_set_cisz,
+	.src_set_ca = src_set_ca,
+	.src_set_sa = src_set_sa,
+	.src_set_la = src_set_la,
+	.src_set_pitch = src_set_pitch,
+	.src_set_dirty = src_set_dirty,
+	.src_set_clear_zbufs = src_set_clear_zbufs,
+	.src_set_dirty_all = src_set_dirty_all,
+	.src_commit_write = src_commit_write,
+	.src_get_ca = src_get_ca,
+	.src_get_dirty = src_get_dirty,
+	.src_dirty_conj_mask = src_dirty_conj_mask,
+	.src_mgr_enbs_src = src_mgr_enbs_src,
+	.src_mgr_enb_src = src_mgr_enb_src,
+	.src_mgr_dsb_src = src_mgr_dsb_src,
+	.src_mgr_commit_write = src_mgr_commit_write,
+
+	.srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk,
+	.srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk,
+	.srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc,
+	.srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser,
+	.srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt,
+	.srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr,
+	.srcimp_mgr_commit_write = srcimp_mgr_commit_write,
+
+	.amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk,
+	.amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk,
+	.amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk,
+	.amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk,
+	.amixer_set_mode = amixer_set_mode,
+	.amixer_set_iv = amixer_set_iv,
+	.amixer_set_x = amixer_set_x,
+	.amixer_set_y = amixer_set_y,
+	.amixer_set_sadr = amixer_set_sadr,
+	.amixer_set_se = amixer_set_se,
+	.amixer_set_dirty = amixer_set_dirty,
+	.amixer_set_dirty_all = amixer_set_dirty_all,
+	.amixer_commit_write = amixer_commit_write,
+	.amixer_get_y = amixer_get_y,
+	.amixer_get_dirty = amixer_get_dirty,
+
+	.dai_get_ctrl_blk = dai_get_ctrl_blk,
+	.dai_put_ctrl_blk = dai_put_ctrl_blk,
+	.dai_srt_set_srco = dai_srt_set_srcr,
+	.dai_srt_set_srcm = dai_srt_set_srcl,
+	.dai_srt_set_rsr = dai_srt_set_rsr,
+	.dai_srt_set_drat = dai_srt_set_drat,
+	.dai_srt_set_ec = dai_srt_set_ec,
+	.dai_srt_set_et = dai_srt_set_et,
+	.dai_commit_write = dai_commit_write,
+
+	.dao_get_ctrl_blk = dao_get_ctrl_blk,
+	.dao_put_ctrl_blk = dao_put_ctrl_blk,
+	.dao_set_spos = dao_set_spos,
+	.dao_commit_write = dao_commit_write,
+	.dao_get_spos = dao_get_spos,
+
+	.daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk,
+	.daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk,
+	.daio_mgr_enb_dai = daio_mgr_enb_dai,
+	.daio_mgr_dsb_dai = daio_mgr_dsb_dai,
+	.daio_mgr_enb_dao = daio_mgr_enb_dao,
+	.daio_mgr_dsb_dao = daio_mgr_dsb_dao,
+	.daio_mgr_dao_init = daio_mgr_dao_init,
+	.daio_mgr_set_imaparc = daio_mgr_set_imaparc,
+	.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
+	.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
+	.daio_mgr_commit_write = daio_mgr_commit_write,
+
+	.set_timer_irq = set_timer_irq,
+	.set_timer_tick = set_timer_tick,
+	.get_wc = get_wc,
+};
+
+int __devinit create_20k1_hw_obj(struct hw **rhw)
+{
+	struct hw20k1 *hw20k1;
+
+	*rhw = NULL;
+	hw20k1 = kzalloc(sizeof(*hw20k1), GFP_KERNEL);
+	if (NULL == hw20k1)
+		return -ENOMEM;
+
+	spin_lock_init(&hw20k1->reg_20k1_lock);
+	spin_lock_init(&hw20k1->reg_pci_lock);
+
+	hw20k1->hw = ct20k1_preset;
+
+	*rhw = &hw20k1->hw;
+
+	return 0;
+}
+
+int destroy_20k1_hw_obj(struct hw *hw)
+{
+	if (hw->io_base)
+		hw_card_shutdown(hw);
+
+	kfree(container_of(hw, struct hw20k1, hw));
+	return 0;
+}
diff --git a/sound/pci/ctxfi/cthw20k1.h b/sound/pci/ctxfi/cthw20k1.h
new file mode 100644
index 00000000000..02f72fb448a
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k1.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k1.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHW20K1_H
+#define CTHW20K1_H
+
+#include "cthardware.h"
+
+int create_20k1_hw_obj(struct hw **rhw);
+int destroy_20k1_hw_obj(struct hw *hw);
+
+#endif /* CTHW20K1_H */
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
new file mode 100644
index 00000000000..4493a51c6b0
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -0,0 +1,2137 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k2.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord for 20k2.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 14 2008
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "cthw20k2.h"
+#include "ct20k2reg.h"
+
+#if BITS_PER_LONG == 32
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
+#else
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
+#endif
+
+struct hw20k2 {
+	struct hw hw;
+	/* for i2c */
+	unsigned char dev_id;
+	unsigned char addr_size;
+	unsigned char data_size;
+};
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg);
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
+
+/*
+ * Type definition block.
+ * The layout of control structures can be directly applied on 20k2 chip.
+ */
+
+/*
+ * SRC control block definitions.
+ */
+
+/* SRC resource control block */
+#define SRCCTL_STATE	0x00000007
+#define SRCCTL_BM	0x00000008
+#define SRCCTL_RSR	0x00000030
+#define SRCCTL_SF	0x000001C0
+#define SRCCTL_WR	0x00000200
+#define SRCCTL_PM	0x00000400
+#define SRCCTL_ROM	0x00001800
+#define SRCCTL_VO	0x00002000
+#define SRCCTL_ST	0x00004000
+#define SRCCTL_IE	0x00008000
+#define SRCCTL_ILSZ	0x000F0000
+#define SRCCTL_BP	0x00100000
+
+#define SRCCCR_CISZ	0x000007FF
+#define SRCCCR_CWA	0x001FF800
+#define SRCCCR_D	0x00200000
+#define SRCCCR_RS	0x01C00000
+#define SRCCCR_NAL	0x3E000000
+#define SRCCCR_RA	0xC0000000
+
+#define SRCCA_CA	0x0FFFFFFF
+#define SRCCA_RS	0xE0000000
+
+#define SRCSA_SA	0x0FFFFFFF
+
+#define SRCLA_LA	0x0FFFFFFF
+
+/* Mixer Parameter Ring ram Low and Hight register.
+ * Fixed-point value in 8.24 format for parameter channel */
+#define MPRLH_PITCH	0xFFFFFFFF
+
+/* SRC resource register dirty flags */
+union src_dirty {
+	struct {
+		u16 ctl:1;
+		u16 ccr:1;
+		u16 sa:1;
+		u16 la:1;
+		u16 ca:1;
+		u16 mpr:1;
+		u16 czbfs:1;	/* Clear Z-Buffers */
+		u16 rsv:9;
+	} bf;
+	u16 data;
+};
+
+struct src_rsc_ctrl_blk {
+	unsigned int	ctl;
+	unsigned int 	ccr;
+	unsigned int	ca;
+	unsigned int	sa;
+	unsigned int	la;
+	unsigned int	mpr;
+	union src_dirty	dirty;
+};
+
+/* SRC manager control block */
+union src_mgr_dirty {
+	struct {
+		u16 enb0:1;
+		u16 enb1:1;
+		u16 enb2:1;
+		u16 enb3:1;
+		u16 enb4:1;
+		u16 enb5:1;
+		u16 enb6:1;
+		u16 enb7:1;
+		u16 enbsa:1;
+		u16 rsv:7;
+	} bf;
+	u16 data;
+};
+
+struct src_mgr_ctrl_blk {
+	unsigned int		enbsa;
+	unsigned int		enb[8];
+	union src_mgr_dirty	dirty;
+};
+
+/* SRCIMP manager control block */
+#define SRCAIM_ARC	0x00000FFF
+#define SRCAIM_NXT	0x00FF0000
+#define SRCAIM_SRC	0xFF000000
+
+struct srcimap {
+	unsigned int srcaim;
+	unsigned int idx;
+};
+
+/* SRCIMP manager register dirty flags */
+union srcimp_mgr_dirty {
+	struct {
+		u16 srcimap:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+struct srcimp_mgr_ctrl_blk {
+	struct srcimap		srcimap;
+	union srcimp_mgr_dirty	dirty;
+};
+
+/*
+ * Function implementation block.
+ */
+
+static int src_get_rsc_ctrl_blk(void **rblk)
+{
+	struct src_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_put_rsc_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int src_set_state(void *blk, unsigned int state)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_STATE, state);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bm(void *blk, unsigned int bm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BM, bm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rsr(void *blk, unsigned int rsr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_RSR, rsr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_sf(void *blk, unsigned int sf)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_SF, sf);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_wr(void *blk, unsigned int wr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_WR, wr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_pm(void *blk, unsigned int pm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_PM, pm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rom(void *blk, unsigned int rom)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ROM, rom);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_vo(void *blk, unsigned int vo)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_VO, vo);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_st(void *blk, unsigned int st)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ST, st);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ie(void *blk, unsigned int ie)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_IE, ie);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ilsz(void *blk, unsigned int ilsz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bp(void *blk, unsigned int bp)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BP, bp);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_cisz(void *blk, unsigned int cisz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ccr, SRCCCR_CISZ, cisz);
+	ctl->dirty.bf.ccr = 1;
+	return 0;
+}
+
+static int src_set_ca(void *blk, unsigned int ca)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ca, SRCCA_CA, ca);
+	ctl->dirty.bf.ca = 1;
+	return 0;
+}
+
+static int src_set_sa(void *blk, unsigned int sa)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->sa, SRCSA_SA, sa);
+	ctl->dirty.bf.sa = 1;
+	return 0;
+}
+
+static int src_set_la(void *blk, unsigned int la)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->la, SRCLA_LA, la);
+	ctl->dirty.bf.la = 1;
+	return 0;
+}
+
+static int src_set_pitch(void *blk, unsigned int pitch)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->mpr, MPRLH_PITCH, pitch);
+	ctl->dirty.bf.mpr = 1;
+	return 0;
+}
+
+static int src_set_clear_zbufs(void *blk, unsigned int clear)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0);
+	return 0;
+}
+
+static int src_set_dirty(void *blk, unsigned int flags)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int src_set_dirty_all(void *blk)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+#define AR_SLOT_SIZE		4096
+#define AR_SLOT_BLOCK_SIZE	16
+#define AR_PTS_PITCH		6
+#define AR_PARAM_SRC_OFFSET	0x60
+
+static unsigned int src_param_pitch_mixer(unsigned int src_idx)
+{
+	return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE
+			- AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE;
+
+}
+
+static int src_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.czbfs) {
+		/* Clear Z-Buffer registers */
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRC_UPZ+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 4; i++)
+			hw_write_20kx(hw, SRC_DN0Z+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRC_DN1Z+idx*0x100+i*0x4, 0);
+
+		ctl->dirty.bf.czbfs = 0;
+	}
+	if (ctl->dirty.bf.mpr) {
+		/* Take the parameter mixer resource in the same group as that
+		 * the idx src is in for simplicity. Unlike src, all conjugate
+		 * parameter mixer resources must be programmed for
+		 * corresponding conjugate src resources. */
+		unsigned int pm_idx = src_param_pitch_mixer(idx);
+		hw_write_20kx(hw, MIXER_PRING_LO_HI+4*pm_idx, ctl->mpr);
+		hw_write_20kx(hw, MIXER_PMOPLO+8*pm_idx, 0x3);
+		hw_write_20kx(hw, MIXER_PMOPHI+8*pm_idx, 0x0);
+		ctl->dirty.bf.mpr = 0;
+	}
+	if (ctl->dirty.bf.sa) {
+		hw_write_20kx(hw, SRC_SA+idx*0x100, ctl->sa);
+		ctl->dirty.bf.sa = 0;
+	}
+	if (ctl->dirty.bf.la) {
+		hw_write_20kx(hw, SRC_LA+idx*0x100, ctl->la);
+		ctl->dirty.bf.la = 0;
+	}
+	if (ctl->dirty.bf.ca) {
+		hw_write_20kx(hw, SRC_CA+idx*0x100, ctl->ca);
+		ctl->dirty.bf.ca = 0;
+	}
+
+	/* Write srccf register */
+	hw_write_20kx(hw, SRC_CF+idx*0x100, 0x0);
+
+	if (ctl->dirty.bf.ccr) {
+		hw_write_20kx(hw, SRC_CCR+idx*0x100, ctl->ccr);
+		ctl->dirty.bf.ccr = 0;
+	}
+	if (ctl->dirty.bf.ctl) {
+		hw_write_20kx(hw, SRC_CTL+idx*0x100, ctl->ctl);
+		ctl->dirty.bf.ctl = 0;
+	}
+
+	return 0;
+}
+
+static int src_get_ca(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	ctl->ca = hw_read_20kx(hw, SRC_CA+idx*0x100);
+	ctl->dirty.bf.ca = 0;
+
+	return get_field(ctl->ca, SRCCA_CA);
+}
+
+static unsigned int src_get_dirty(void *blk)
+{
+	return ((struct src_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static unsigned int src_dirty_conj_mask(void)
+{
+	return 0x20;
+}
+
+static int src_mgr_enbs_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enbsa |= (0x1 << ((idx%128)/4));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1;
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	return 0;
+}
+
+static int src_mgr_enb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_dsb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct src_mgr_ctrl_blk *ctl = blk;
+	int i;
+	unsigned int ret;
+
+	if (ctl->dirty.bf.enbsa) {
+		do {
+			ret = hw_read_20kx(hw, SRC_ENBSTAT);
+		} while (ret & 0x1);
+		hw_write_20kx(hw, SRC_ENBSA, ctl->enbsa);
+		ctl->dirty.bf.enbsa = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.data & (0x1 << i))) {
+			hw_write_20kx(hw, SRC_ENB+(i*0x100), ctl->enb[i]);
+			ctl->dirty.data &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static int src_mgr_get_ctrl_blk(void **rblk)
+{
+	struct src_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_get_ctrl_blk(void **rblk)
+{
+	struct srcimp_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int srcimp_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapuser(void *blk, unsigned int user)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	((struct srcimp_mgr_ctrl_blk *)blk)->srcimap.idx = addr;
+	((struct srcimp_mgr_ctrl_blk *)blk)->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srcimap) {
+		hw_write_20kx(hw, SRC_IMAP+ctl->srcimap.idx*0x100,
+						ctl->srcimap.srcaim);
+		ctl->dirty.bf.srcimap = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * AMIXER control block definitions.
+ */
+
+#define AMOPLO_M	0x00000003
+#define AMOPLO_IV	0x00000004
+#define AMOPLO_X	0x0003FFF0
+#define AMOPLO_Y	0xFFFC0000
+
+#define AMOPHI_SADR	0x000000FF
+#define AMOPHI_SE	0x80000000
+
+/* AMIXER resource register dirty flags */
+union amixer_dirty {
+	struct {
+		u16 amoplo:1;
+		u16 amophi:1;
+		u16 rsv:14;
+	} bf;
+	u16 data;
+};
+
+/* AMIXER resource control block */
+struct amixer_rsc_ctrl_blk {
+	unsigned int		amoplo;
+	unsigned int		amophi;
+	union amixer_dirty	dirty;
+};
+
+static int amixer_set_mode(void *blk, unsigned int mode)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_M, mode);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_iv(void *blk, unsigned int iv)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_IV, iv);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_x(void *blk, unsigned int x)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_X, x);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_y(void *blk, unsigned int y)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_Y, y);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_sadr(void *blk, unsigned int sadr)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SADR, sadr);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_se(void *blk, unsigned int se)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SE, se);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_dirty(void *blk, unsigned int flags)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int amixer_set_dirty_all(void *blk)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) {
+		hw_write_20kx(hw, MIXER_AMOPLO+idx*8, ctl->amoplo);
+		ctl->dirty.bf.amoplo = 0;
+		hw_write_20kx(hw, MIXER_AMOPHI+idx*8, ctl->amophi);
+		ctl->dirty.bf.amophi = 0;
+	}
+
+	return 0;
+}
+
+static int amixer_get_y(void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	return get_field(ctl->amoplo, AMOPLO_Y);
+}
+
+static unsigned int amixer_get_dirty(void *blk)
+{
+	return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static int amixer_rsc_get_ctrl_blk(void **rblk)
+{
+	struct amixer_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int amixer_rsc_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int amixer_mgr_get_ctrl_blk(void **rblk)
+{
+	*rblk = NULL;
+
+	return 0;
+}
+
+static int amixer_mgr_put_ctrl_blk(void *blk)
+{
+	return 0;
+}
+
+/*
+ * DAIO control block definitions.
+ */
+
+/* Receiver Sample Rate Tracker Control register */
+#define SRTCTL_SRCO	0x000000FF
+#define SRTCTL_SRCM	0x0000FF00
+#define SRTCTL_RSR	0x00030000
+#define SRTCTL_DRAT	0x00300000
+#define SRTCTL_EC	0x01000000
+#define SRTCTL_ET	0x10000000
+
+/* DAIO Receiver register dirty flags */
+union dai_dirty {
+	struct {
+		u16 srt:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* DAIO Receiver control block */
+struct dai_ctrl_blk {
+	unsigned int	srt;
+	union dai_dirty	dirty;
+};
+
+/* Audio Input Mapper RAM */
+#define AIM_ARC		0x00000FFF
+#define AIM_NXT		0x007F0000
+
+struct daoimap {
+	unsigned int aim;
+	unsigned int idx;
+};
+
+/* Audio Transmitter Control and Status register */
+#define ATXCTL_EN	0x00000001
+#define ATXCTL_MODE	0x00000010
+#define ATXCTL_CD	0x00000020
+#define ATXCTL_RAW	0x00000100
+#define ATXCTL_MT	0x00000200
+#define ATXCTL_NUC	0x00003000
+#define ATXCTL_BEN	0x00010000
+#define ATXCTL_BMUX	0x00700000
+#define ATXCTL_B24	0x01000000
+#define ATXCTL_CPF	0x02000000
+#define ATXCTL_RIV	0x10000000
+#define ATXCTL_LIV	0x20000000
+#define ATXCTL_RSAT	0x40000000
+#define ATXCTL_LSAT	0x80000000
+
+/* XDIF Transmitter register dirty flags */
+union dao_dirty {
+	struct {
+		u16 atxcsl:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* XDIF Transmitter control block */
+struct dao_ctrl_blk {
+	/* XDIF Transmitter Channel Status Low Register */
+	unsigned int	atxcsl;
+	union dao_dirty	dirty;
+};
+
+/* Audio Receiver Control register */
+#define ARXCTL_EN	0x00000001
+
+/* DAIO manager register dirty flags */
+union daio_mgr_dirty {
+	struct {
+		u32 atxctl:8;
+		u32 arxctl:8;
+		u32 daoimap:1;
+		u32 rsv:15;
+	} bf;
+	u32 data;
+};
+
+/* DAIO manager control block */
+struct daio_mgr_ctrl_blk {
+	struct daoimap		daoimap;
+	unsigned int		txctl[8];
+	unsigned int		rxctl[8];
+	union daio_mgr_dirty	dirty;
+};
+
+static int dai_srt_set_srco(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_SRCO, src);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_srcm(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_SRCM, src);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_rsr(void *blk, unsigned int rsr)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_RSR, rsr);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_drat(void *blk, unsigned int drat)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_DRAT, drat);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_ec(void *blk, unsigned int ec)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_EC, ec ? 1 : 0);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_et(void *blk, unsigned int et)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_ET, et ? 1 : 0);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srt) {
+		hw_write_20kx(hw, AUDIO_IO_RX_SRT_CTL+0x40*idx, ctl->srt);
+		ctl->dirty.bf.srt = 0;
+	}
+
+	return 0;
+}
+
+static int dai_get_ctrl_blk(void **rblk)
+{
+	struct dai_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dai_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int dao_set_spos(void *blk, unsigned int spos)
+{
+	((struct dao_ctrl_blk *)blk)->atxcsl = spos;
+	((struct dao_ctrl_blk *)blk)->dirty.bf.atxcsl = 1;
+	return 0;
+}
+
+static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dao_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.atxcsl) {
+		if (idx < 4) {
+			/* S/PDIF SPOSx */
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+0x40*idx,
+							ctl->atxcsl);
+		}
+		ctl->dirty.bf.atxcsl = 0;
+	}
+
+	return 0;
+}
+
+static int dao_get_spos(void *blk, unsigned int *spos)
+{
+	*spos = ((struct dao_ctrl_blk *)blk)->atxcsl;
+	return 0;
+}
+
+static int dao_get_ctrl_blk(void **rblk)
+{
+	struct dao_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dao_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int daio_mgr_enb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->rxctl[idx], ARXCTL_EN, 1);
+	ctl->dirty.bf.arxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dsb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->rxctl[idx], ARXCTL_EN, 0);
+
+	ctl->dirty.bf.arxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_enb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->txctl[idx], ATXCTL_EN, 1);
+	ctl->dirty.bf.atxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dsb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->txctl[idx], ATXCTL_EN, 0);
+	ctl->dirty.bf.atxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		switch ((conf & 0x7)) {
+		case 1:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 0);
+			break;
+		case 2:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 1);
+			break;
+		case 4:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 2);
+			break;
+		case 8:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 3);
+			break;
+		default:
+			break;
+		}
+		/* CDIF */
+		set_field(&ctl->txctl[idx], ATXCTL_CD, (!(conf & 0x7)));
+		/* Non-audio */
+		set_field(&ctl->txctl[idx], ATXCTL_LIV, (conf >> 4) & 0x1);
+		/* Non-audio */
+		set_field(&ctl->txctl[idx], ATXCTL_RIV, (conf >> 4) & 0x1);
+		set_field(&ctl->txctl[idx], ATXCTL_RAW,
+			  ((conf >> 3) & 0x1) ? 0 : 0);
+		ctl->dirty.bf.atxctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		/*idx %= 4; */
+	}
+	return 0;
+}
+
+static int daio_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_ARC, slot);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_NXT, next);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	((struct daio_mgr_ctrl_blk *)blk)->daoimap.idx = addr;
+	((struct daio_mgr_ctrl_blk *)blk)->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+	unsigned int data;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.bf.atxctl & (0x1 << i))) {
+			data = ctl->txctl[i];
+			hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
+			ctl->dirty.bf.atxctl &= ~(0x1 << i);
+			mdelay(1);
+		}
+		if ((ctl->dirty.bf.arxctl & (0x1 << i))) {
+			data = ctl->rxctl[i];
+			hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
+			ctl->dirty.bf.arxctl &= ~(0x1 << i);
+			mdelay(1);
+		}
+	}
+	if (ctl->dirty.bf.daoimap) {
+		hw_write_20kx(hw, AUDIO_IO_AIM+ctl->daoimap.idx*4,
+						ctl->daoimap.aim);
+		ctl->dirty.bf.daoimap = 0;
+	}
+
+	return 0;
+}
+
+static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
+{
+	struct daio_mgr_ctrl_blk *blk;
+	int i;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	for (i = 0; i < 8; i++) {
+		blk->txctl[i] = hw_read_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i));
+		blk->rxctl[i] = hw_read_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i));
+	}
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int daio_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+/* Card hardware initialization block */
+struct dac_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct adc_conf {
+	unsigned int msr; 	/* master sample rate in rsrs */
+	unsigned char input; 	/* the input source of ADC */
+	unsigned char mic20db; 	/* boost mic by 20db if input is microphone */
+};
+
+struct daio_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct trn_conf {
+	unsigned long vm_pgt_phys;
+};
+
+static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
+{
+	u32 data;
+	int i;
+
+	/* Program I2S with proper sample rate and enable the correct I2S
+	 * channel. ED(0/8/16/24): Enable all I2S/I2X master clock output */
+	if (1 == info->msr) {
+		hw_write_20kx(hw, AUDIO_IO_MCLK, 0x01010101);
+		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x01010101);
+		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+	} else if (2 == info->msr) {
+		hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11111111);
+		/* Specify all playing 96khz
+		 * EA [0]	- Enabled
+		 * RTA [4:5]	- 96kHz
+		 * EB [8]	- Enabled
+		 * RTB [12:13]	- 96kHz
+		 * EC [16]	- Enabled
+		 * RTC [20:21]	- 96kHz
+		 * ED [24]	- Enabled
+		 * RTD [28:29]	- 96kHz */
+		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x11111111);
+		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+	} else {
+		printk(KERN_ALERT "ctxfi: ERROR!!! Invalid sampling rate!!!\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if (i <= 3) {
+			/* 1st 3 channels are SPDIFs (SB0960) */
+			if (i == 3)
+				data = 0x1001001;
+			else
+				data = 0x1000001;
+
+			hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
+			hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
+
+			/* Initialize the SPDIF Out Channel status registers.
+			 * The value specified here is based on the typical
+			 * values provided in the specification, namely: Clock
+			 * Accuracy of 1000ppm, Sample Rate of 48KHz,
+			 * unspecified source number, Generation status = 1,
+			 * Category code = 0x12 (Digital Signal Mixer),
+			 * Mode = 0, Emph = 0, Copy Permitted, AN = 0
+			 * (indicating that we're transmitting digital audio,
+			 * and the Professional Use bit is 0. */
+
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+(0x40*i),
+					0x02109204); /* Default to 48kHz */
+
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_H+(0x40*i), 0x0B);
+		} else {
+			/* Next 5 channels are I2S (SB0960) */
+			data = 0x11;
+			hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), data);
+			if (2 == info->msr) {
+				/* Four channels per sample period */
+				data |= 0x1000;
+			}
+			hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), data);
+		}
+	}
+
+	return 0;
+}
+
+/* TRANSPORT operations */
+static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
+{
+	u32 vmctl, data;
+	u32 ptp_phys_low, ptp_phys_high;
+	int i;
+
+	/* Set up device page table */
+	if ((~0UL) == info->vm_pgt_phys) {
+		printk(KERN_ALERT "ctxfi: "
+		       "Wrong device page table page address!!!\n");
+		return -1;
+	}
+
+	vmctl = 0x80000C0F;  /* 32-bit, 4k-size page */
+	ptp_phys_low = (u32)info->vm_pgt_phys;
+	ptp_phys_high = upper_32_bits(info->vm_pgt_phys);
+	if (sizeof(void *) == 8) /* 64bit address */
+		vmctl |= (3 << 8);
+	/* Write page table physical address to all PTPAL registers */
+	for (i = 0; i < 64; i++) {
+		hw_write_20kx(hw, VMEM_PTPAL+(16*i), ptp_phys_low);
+		hw_write_20kx(hw, VMEM_PTPAH+(16*i), ptp_phys_high);
+	}
+	/* Enable virtual memory transfer */
+	hw_write_20kx(hw, VMEM_CTL, vmctl);
+	/* Enable transport bus master and queueing of request */
+	hw_write_20kx(hw, TRANSPORT_CTL, 0x03);
+	hw_write_20kx(hw, TRANSPORT_INT, 0x200c01);
+	/* Enable transport ring */
+	data = hw_read_20kx(hw, TRANSPORT_ENB);
+	hw_write_20kx(hw, TRANSPORT_ENB, (data | 0x03));
+
+	return 0;
+}
+
+/* Card initialization */
+#define GCTL_AIE	0x00000001
+#define GCTL_UAA	0x00000002
+#define GCTL_DPC	0x00000004
+#define GCTL_DBP	0x00000008
+#define GCTL_ABP	0x00000010
+#define GCTL_TBP	0x00000020
+#define GCTL_SBP	0x00000040
+#define GCTL_FBP	0x00000080
+#define GCTL_ME		0x00000100
+#define GCTL_AID	0x00001000
+
+#define PLLCTL_SRC	0x00000007
+#define PLLCTL_SPE	0x00000008
+#define PLLCTL_RD	0x000000F0
+#define PLLCTL_FD	0x0001FF00
+#define PLLCTL_OD	0x00060000
+#define PLLCTL_B	0x00080000
+#define PLLCTL_AS	0x00100000
+#define PLLCTL_LF	0x03E00000
+#define PLLCTL_SPS	0x1C000000
+#define PLLCTL_AD	0x60000000
+
+#define PLLSTAT_CCS	0x00000007
+#define PLLSTAT_SPL	0x00000008
+#define PLLSTAT_CRD	0x000000F0
+#define PLLSTAT_CFD	0x0001FF00
+#define PLLSTAT_SL	0x00020000
+#define PLLSTAT_FAS	0x00040000
+#define PLLSTAT_B	0x00080000
+#define PLLSTAT_PD	0x00100000
+#define PLLSTAT_OCA	0x00200000
+#define PLLSTAT_NCA	0x00400000
+
+static int hw_pll_init(struct hw *hw, unsigned int rsr)
+{
+	unsigned int pllenb;
+	unsigned int pllctl;
+	unsigned int pllstat;
+	int i;
+
+	pllenb = 0xB;
+	hw_write_20kx(hw, PLL_ENB, pllenb);
+	pllctl = 0x20D00000;
+	set_field(&pllctl, PLLCTL_FD, 16 - 4);
+	hw_write_20kx(hw, PLL_CTL, pllctl);
+	mdelay(40);
+	pllctl = hw_read_20kx(hw, PLL_CTL);
+	set_field(&pllctl, PLLCTL_B, 0);
+	if (48000 == rsr) {
+		set_field(&pllctl, PLLCTL_FD, 16 - 2);
+		set_field(&pllctl, PLLCTL_RD, 1 - 1);
+	} else { /* 44100 */
+		set_field(&pllctl, PLLCTL_FD, 147 - 2);
+		set_field(&pllctl, PLLCTL_RD, 10 - 1);
+	}
+	hw_write_20kx(hw, PLL_CTL, pllctl);
+	mdelay(40);
+	for (i = 0; i < 1000; i++) {
+		pllstat = hw_read_20kx(hw, PLL_STAT);
+		if (get_field(pllstat, PLLSTAT_PD))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_B) !=
+					get_field(pllctl, PLLCTL_B))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CCS) !=
+					get_field(pllctl, PLLCTL_SRC))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CRD) !=
+					get_field(pllctl, PLLCTL_RD))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CFD) !=
+					get_field(pllctl, PLLCTL_FD))
+			continue;
+
+		break;
+	}
+	if (i >= 1000) {
+		printk(KERN_ALERT "ctxfi: PLL initialization failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int hw_auto_init(struct hw *hw)
+{
+	unsigned int gctl;
+	int i;
+
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_AIE, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+	set_field(&gctl, GCTL_AIE, 1);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+	mdelay(10);
+	for (i = 0; i < 400000; i++) {
+		gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+		if (get_field(gctl, GCTL_AID))
+			break;
+	}
+	if (!get_field(gctl, GCTL_AID)) {
+		printk(KERN_ALERT "ctxfi: Card Auto-init failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/* DAC operations */
+
+#define CS4382_MC1 		0x1
+#define CS4382_MC2 		0x2
+#define CS4382_MC3		0x3
+#define CS4382_FC		0x4
+#define CS4382_IC		0x5
+#define CS4382_XC1		0x6
+#define CS4382_VCA1 		0x7
+#define CS4382_VCB1 		0x8
+#define CS4382_XC2		0x9
+#define CS4382_VCA2 		0xA
+#define CS4382_VCB2 		0xB
+#define CS4382_XC3		0xC
+#define CS4382_VCA3		0xD
+#define CS4382_VCB3		0xE
+#define CS4382_XC4 		0xF
+#define CS4382_VCA4 		0x10
+#define CS4382_VCB4 		0x11
+#define CS4382_CREV 		0x12
+
+/* I2C status */
+#define STATE_LOCKED		0x00
+#define STATE_UNLOCKED		0xAA
+#define DATA_READY		0x800000    /* Used with I2C_IF_STATUS */
+#define DATA_ABORT		0x10000     /* Used with I2C_IF_STATUS */
+
+#define I2C_STATUS_DCM	0x00000001
+#define I2C_STATUS_BC	0x00000006
+#define I2C_STATUS_APD	0x00000008
+#define I2C_STATUS_AB	0x00010000
+#define I2C_STATUS_DR	0x00800000
+
+#define I2C_ADDRESS_PTAD	0x0000FFFF
+#define I2C_ADDRESS_SLAD	0x007F0000
+
+struct regs_cs4382 {
+	u32 mode_control_1;
+	u32 mode_control_2;
+	u32 mode_control_3;
+
+	u32 filter_control;
+	u32 invert_control;
+
+	u32 mix_control_P1;
+	u32 vol_control_A1;
+	u32 vol_control_B1;
+
+	u32 mix_control_P2;
+	u32 vol_control_A2;
+	u32 vol_control_B2;
+
+	u32 mix_control_P3;
+	u32 vol_control_A3;
+	u32 vol_control_B3;
+
+	u32 mix_control_P4;
+	u32 vol_control_A4;
+	u32 vol_control_B4;
+};
+
+static int hw20k2_i2c_unlock_full_access(struct hw *hw)
+{
+	u8 UnlockKeySequence_FLASH_FULLACCESS_MODE[2] =  {0xB3, 0xD4};
+
+	/* Send keys for forced BIOS mode */
+	hw_write_20kx(hw, I2C_IF_WLOCK,
+			UnlockKeySequence_FLASH_FULLACCESS_MODE[0]);
+	hw_write_20kx(hw, I2C_IF_WLOCK,
+			UnlockKeySequence_FLASH_FULLACCESS_MODE[1]);
+	/* Check whether the chip is unlocked */
+	if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_UNLOCKED)
+		return 0;
+
+	return -1;
+}
+
+static int hw20k2_i2c_lock_chip(struct hw *hw)
+{
+	/* Write twice */
+	hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
+	hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
+	if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_LOCKED)
+		return 0;
+
+	return -1;
+}
+
+static int hw20k2_i2c_init(struct hw *hw, u8 dev_id, u8 addr_size, u8 data_size)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	int err;
+	unsigned int i2c_status;
+	unsigned int i2c_addr;
+
+	err = hw20k2_i2c_unlock_full_access(hw);
+	if (err < 0)
+		return err;
+
+	hw20k2->addr_size = addr_size;
+	hw20k2->data_size = data_size;
+	hw20k2->dev_id = dev_id;
+
+	i2c_addr = 0;
+	set_field(&i2c_addr, I2C_ADDRESS_SLAD, dev_id);
+
+	hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_DCM, 1); /* Direct control mode */
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+
+	return 0;
+}
+
+static int hw20k2_i2c_uninit(struct hw *hw)
+{
+	unsigned int i2c_status;
+	unsigned int i2c_addr;
+
+	i2c_addr = 0;
+	set_field(&i2c_addr, I2C_ADDRESS_SLAD, 0x57); /* I2C id */
+
+	hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_DCM, 0); /* I2C mode */
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+
+	return hw20k2_i2c_lock_chip(hw);
+}
+
+static int hw20k2_i2c_wait_data_ready(struct hw *hw)
+{
+	int i = 0x400000;
+	unsigned int ret;
+
+	do {
+		ret = hw_read_20kx(hw, I2C_IF_STATUS);
+	} while ((!(ret & DATA_READY)) && --i);
+
+	return i;
+}
+
+static int hw20k2_i2c_read(struct hw *hw, u16 addr, u32 *datap)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	unsigned int i2c_status;
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+	set_field(&i2c_status, I2C_STATUS_BC,
+		  (4 == hw20k2->addr_size) ? 0 : hw20k2->addr_size);
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	hw_write_20kx(hw, I2C_IF_WDATA, addr);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	/* Force a read operation */
+	hw_write_20kx(hw, I2C_IF_RDATA, 0);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	*datap = hw_read_20kx(hw, I2C_IF_RDATA);
+
+	return 0;
+}
+
+static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	unsigned int i2c_data = (data << (hw20k2->addr_size * 8)) | addr;
+	unsigned int i2c_status;
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_BC,
+		  (4 == (hw20k2->addr_size + hw20k2->data_size)) ?
+		  0 : (hw20k2->addr_size + hw20k2->data_size));
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+	hw20k2_i2c_wait_data_ready(hw);
+	/* Dummy write to trigger the write oprtation */
+	hw_write_20kx(hw, I2C_IF_WDATA, 0);
+	hw20k2_i2c_wait_data_ready(hw);
+
+	/* This is the real data */
+	hw_write_20kx(hw, I2C_IF_WDATA, i2c_data);
+	hw20k2_i2c_wait_data_ready(hw);
+
+	return 0;
+}
+
+static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
+{
+	int err;
+	u32 data;
+	int i;
+	struct regs_cs4382 cs_read = {0};
+	struct regs_cs4382 cs_def = {
+				   0x00000001,  /* Mode Control 1 */
+				   0x00000000,  /* Mode Control 2 */
+				   0x00000084,  /* Mode Control 3 */
+				   0x00000000,  /* Filter Control */
+				   0x00000000,  /* Invert Control */
+				   0x00000024,  /* Mixing Control Pair 1 */
+				   0x00000000,  /* Vol Control A1 */
+				   0x00000000,  /* Vol Control B1 */
+				   0x00000024,  /* Mixing Control Pair 2 */
+				   0x00000000,  /* Vol Control A2 */
+				   0x00000000,  /* Vol Control B2 */
+				   0x00000024,  /* Mixing Control Pair 3 */
+				   0x00000000,  /* Vol Control A3 */
+				   0x00000000,  /* Vol Control B3 */
+				   0x00000024,  /* Mixing Control Pair 4 */
+				   0x00000000,  /* Vol Control A4 */
+				   0x00000000   /* Vol Control B4 */
+				 };
+
+	/* Set DAC reset bit as output */
+	data = hw_read_20kx(hw, GPIO_CTRL);
+	data |= 0x02;
+	hw_write_20kx(hw, GPIO_CTRL, data);
+
+	err = hw20k2_i2c_init(hw, 0x18, 1, 1);
+	if (err < 0)
+		goto End;
+
+	for (i = 0; i < 2; i++) {
+		/* Reset DAC twice just in-case the chip
+		 * didn't initialized properly */
+		data = hw_read_20kx(hw, GPIO_DATA);
+		/* GPIO data bit 1 */
+		data &= 0xFFFFFFFD;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(10);
+		data |= 0x2;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(50);
+
+		/* Reset the 2nd time */
+		data &= 0xFFFFFFFD;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(10);
+		data |= 0x2;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(50);
+
+		if (hw20k2_i2c_read(hw, CS4382_MC1,  &cs_read.mode_control_1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_MC2,  &cs_read.mode_control_2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_MC3,  &cs_read.mode_control_3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_FC,   &cs_read.filter_control))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_IC,   &cs_read.invert_control))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC1,  &cs_read.mix_control_P1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA1, &cs_read.vol_control_A1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB1, &cs_read.vol_control_B1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC2,  &cs_read.mix_control_P2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA2, &cs_read.vol_control_A2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB2, &cs_read.vol_control_B2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC3,  &cs_read.mix_control_P3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA3, &cs_read.vol_control_A3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB3, &cs_read.vol_control_B3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC4,  &cs_read.mix_control_P4))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA4, &cs_read.vol_control_A4))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB4, &cs_read.vol_control_B4))
+			continue;
+
+		if (memcmp(&cs_read, &cs_def, sizeof(cs_read)))
+			continue;
+		else
+			break;
+	}
+
+	if (i >= 2)
+		goto End;
+
+	/* Note: Every I2C write must have some delay.
+	 * This is not a requirement but the delay works here... */
+	hw20k2_i2c_write(hw, CS4382_MC1, 0x80);
+	hw20k2_i2c_write(hw, CS4382_MC2, 0x10);
+	if (1 == info->msr) {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x24);
+	} else if (2 == info->msr) {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x25);
+	} else {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x26);
+	}
+
+	return 0;
+End:
+
+	hw20k2_i2c_uninit(hw);
+	return -1;
+}
+
+/* ADC operations */
+#define MAKE_WM8775_ADDR(addr, data)	(u32)(((addr<<1)&0xFE)|((data>>8)&0x1))
+#define MAKE_WM8775_DATA(data)	(u32)(data&0xFF)
+
+#define WM8775_IC       0x0B
+#define WM8775_MMC      0x0C
+#define WM8775_AADCL    0x0E
+#define WM8775_AADCR    0x0F
+#define WM8775_ADCMC    0x15
+#define WM8775_RESET    0x17
+
+static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO_DATA);
+	switch (type) {
+	case ADC_MICIN:
+		data = (data & (0x1 << 14)) ? 1 : 0;
+		break;
+	case ADC_LINEIN:
+		data = (data & (0x1 << 14)) ? 0 : 1;
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO_DATA);
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
+				MAKE_WM8775_DATA(0x101)); /* Mic-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
+				MAKE_WM8775_DATA(0x102)); /* Line-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
+{
+	int err;
+	u32 mux = 2, data, ctl;
+
+	/*  Set ADC reset bit as output */
+	data = hw_read_20kx(hw, GPIO_CTRL);
+	data |= (0x1 << 15);
+	hw_write_20kx(hw, GPIO_CTRL, data);
+
+	/* Initialize I2C */
+	err = hw20k2_i2c_init(hw, 0x1A, 1, 1);
+	if (err < 0) {
+		printk(KERN_ALERT "ctxfi: Failure to acquire I2C!!!\n");
+		goto error;
+	}
+
+	/* Make ADC in normal operation */
+	data = hw_read_20kx(hw, GPIO_DATA);
+	data &= ~(0x1 << 15);
+	mdelay(10);
+	data |= (0x1 << 15);
+	hw_write_20kx(hw, GPIO_DATA, data);
+	mdelay(50);
+
+	/* Set the master mode (256fs) */
+	if (1 == info->msr) {
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02),
+						MAKE_WM8775_DATA(0x02));
+	} else if (2 == info->msr) {
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
+						MAKE_WM8775_DATA(0x0A));
+	} else {
+		printk(KERN_ALERT "ctxfi: Invalid master sampling "
+				  "rate (msr %d)!!!\n", info->msr);
+		err = -EINVAL;
+		goto error;
+	}
+
+	/* Configure GPIO bit 14 change to line-in/mic-in */
+	ctl = hw_read_20kx(hw, GPIO_CTRL);
+	ctl |= 0x1 << 14;
+	hw_write_20kx(hw, GPIO_CTRL, ctl);
+
+	/* Check using Mic-in or Line-in */
+	data = hw_read_20kx(hw, GPIO_DATA);
+
+	if (mux == 1) {
+		/* Configures GPIO data to select Mic-in */
+		data |= 0x1 << 14;
+		hw_write_20kx(hw, GPIO_DATA, data);
+
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
+				MAKE_WM8775_DATA(0x101)); /* Mic-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+	} else if (mux == 2) {
+		/* Configures GPIO data to select Line-in */
+		data &= ~(0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+
+		/* Setup ADC */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
+				MAKE_WM8775_DATA(0x102)); /* Line-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+	} else {
+		printk(KERN_ALERT "ctxfi: ERROR!!! Invalid input mux!!!\n");
+		err = -EINVAL;
+		goto error;
+	}
+
+	return 0;
+
+error:
+	hw20k2_i2c_uninit(hw);
+	return err;
+}
+
+static int hw_have_digit_io_switch(struct hw *hw)
+{
+	return 0;
+}
+
+static int hw_card_start(struct hw *hw)
+{
+	int err = 0;
+	struct pci_dev *pci = hw->pci;
+	unsigned int gctl;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	/* Set DMA transfer mask */
+	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
+		printk(KERN_ERR "ctxfi: architecture does not support PCI "
+		"busmaster DMA with mask 0x%llx\n", CT_XFI_DMA_MASK);
+		err = -ENXIO;
+		goto error1;
+	}
+
+	err = pci_request_regions(pci, "XFi");
+	if (err < 0)
+		goto error1;
+
+	hw->io_base = pci_resource_start(hw->pci, 2);
+	hw->mem_base = (unsigned long)ioremap(hw->io_base,
+					pci_resource_len(hw->pci, 2));
+	if (NULL == (void *)hw->mem_base) {
+		err = -ENOENT;
+		goto error2;
+	}
+
+	/* Switch to 20k2 mode from UAA mode. */
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_UAA, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+
+	/*if ((err = request_irq(pci->irq, ct_atc_interrupt, IRQF_SHARED,
+				atc->chip_details->nm_card, hw))) {
+		goto error3;
+	}
+	hw->irq = pci->irq;
+	*/
+
+	pci_set_master(pci);
+
+	return 0;
+
+/*error3:
+	iounmap((void *)hw->mem_base);
+	hw->mem_base = (unsigned long)NULL;*/
+error2:
+	pci_release_regions(pci);
+	hw->io_base = 0;
+error1:
+	pci_disable_device(pci);
+	return err;
+}
+
+static int hw_card_stop(struct hw *hw)
+{
+	/* TODO: Disable interrupt and so on... */
+	return 0;
+}
+
+static int hw_card_shutdown(struct hw *hw)
+{
+	if (hw->irq >= 0)
+		free_irq(hw->irq, hw);
+
+	hw->irq	= -1;
+
+	if (NULL != ((void *)hw->mem_base))
+		iounmap((void *)hw->mem_base);
+
+	hw->mem_base = (unsigned long)NULL;
+
+	if (hw->io_base)
+		pci_release_regions(hw->pci);
+
+	hw->io_base = 0;
+
+	pci_disable_device(hw->pci);
+
+	return 0;
+}
+
+static int hw_card_init(struct hw *hw, struct card_conf *info)
+{
+	int err;
+	unsigned int gctl;
+	u32 data = 0;
+	struct dac_conf dac_info = {0};
+	struct adc_conf adc_info = {0};
+	struct daio_conf daio_info = {0};
+	struct trn_conf trn_info = {0};
+
+	/* Get PCI io port/memory base address and
+	 * do 20kx core switch if needed. */
+	if (!hw->io_base) {
+		err = hw_card_start(hw);
+		if (err)
+			return err;
+	}
+
+	/* PLL init */
+	err = hw_pll_init(hw, info->rsr);
+	if (err < 0)
+		return err;
+
+	/* kick off auto-init */
+	err = hw_auto_init(hw);
+	if (err < 0)
+		return err;
+
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_DBP, 1);
+	set_field(&gctl, GCTL_TBP, 1);
+	set_field(&gctl, GCTL_FBP, 1);
+	set_field(&gctl, GCTL_DPC, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+
+	/* Reset all global pending interrupts */
+	hw_write_20kx(hw, INTERRUPT_GIE, 0);
+	/* Reset all SRC pending interrupts */
+	hw_write_20kx(hw, SRC_IP, 0);
+
+	/* TODO: detect the card ID and configure GPIO accordingly. */
+	/* Configures GPIO (0xD802 0x98028) */
+	/*hw_write_20kx(hw, GPIO_CTRL, 0x7F07);*/
+	/* Configures GPIO (SB0880) */
+	/*hw_write_20kx(hw, GPIO_CTRL, 0xFF07);*/
+	hw_write_20kx(hw, GPIO_CTRL, 0xD802);
+
+	/* Enable audio ring */
+	hw_write_20kx(hw, MIXER_AR_ENABLE, 0x01);
+
+	trn_info.vm_pgt_phys = info->vm_pgt_phys;
+	err = hw_trn_init(hw, &trn_info);
+	if (err < 0)
+		return err;
+
+	daio_info.msr = info->msr;
+	err = hw_daio_init(hw, &daio_info);
+	if (err < 0)
+		return err;
+
+	dac_info.msr = info->msr;
+	err = hw_dac_init(hw, &dac_info);
+	if (err < 0)
+		return err;
+
+	adc_info.msr = info->msr;
+	adc_info.input = ADC_LINEIN;
+	adc_info.mic20db = 0;
+	err = hw_adc_init(hw, &adc_info);
+	if (err < 0)
+		return err;
+
+	data = hw_read_20kx(hw, SRC_MCTL);
+	data |= 0x1; /* Enables input from the audio ring */
+	hw_write_20kx(hw, SRC_MCTL, data);
+
+	return 0;
+}
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg)
+{
+	return readl((void *)(hw->mem_base + reg));
+}
+
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data)
+{
+	writel(data, (void *)(hw->mem_base + reg));
+}
+
+static struct hw ct20k2_preset __devinitdata = {
+	.irq = -1,
+
+	.card_init = hw_card_init,
+	.card_stop = hw_card_stop,
+	.pll_init = hw_pll_init,
+	.is_adc_source_selected = hw_is_adc_input_selected,
+	.select_adc_source = hw_adc_input_select,
+	.have_digit_io_switch = hw_have_digit_io_switch,
+
+	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
+	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
+	.src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk,
+	.src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk,
+	.src_set_state = src_set_state,
+	.src_set_bm = src_set_bm,
+	.src_set_rsr = src_set_rsr,
+	.src_set_sf = src_set_sf,
+	.src_set_wr = src_set_wr,
+	.src_set_pm = src_set_pm,
+	.src_set_rom = src_set_rom,
+	.src_set_vo = src_set_vo,
+	.src_set_st = src_set_st,
+	.src_set_ie = src_set_ie,
+	.src_set_ilsz = src_set_ilsz,
+	.src_set_bp = src_set_bp,
+	.src_set_cisz = src_set_cisz,
+	.src_set_ca = src_set_ca,
+	.src_set_sa = src_set_sa,
+	.src_set_la = src_set_la,
+	.src_set_pitch = src_set_pitch,
+	.src_set_dirty = src_set_dirty,
+	.src_set_clear_zbufs = src_set_clear_zbufs,
+	.src_set_dirty_all = src_set_dirty_all,
+	.src_commit_write = src_commit_write,
+	.src_get_ca = src_get_ca,
+	.src_get_dirty = src_get_dirty,
+	.src_dirty_conj_mask = src_dirty_conj_mask,
+	.src_mgr_enbs_src = src_mgr_enbs_src,
+	.src_mgr_enb_src = src_mgr_enb_src,
+	.src_mgr_dsb_src = src_mgr_dsb_src,
+	.src_mgr_commit_write = src_mgr_commit_write,
+
+	.srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk,
+	.srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk,
+	.srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc,
+	.srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser,
+	.srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt,
+	.srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr,
+	.srcimp_mgr_commit_write = srcimp_mgr_commit_write,
+
+	.amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk,
+	.amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk,
+	.amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk,
+	.amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk,
+	.amixer_set_mode = amixer_set_mode,
+	.amixer_set_iv = amixer_set_iv,
+	.amixer_set_x = amixer_set_x,
+	.amixer_set_y = amixer_set_y,
+	.amixer_set_sadr = amixer_set_sadr,
+	.amixer_set_se = amixer_set_se,
+	.amixer_set_dirty = amixer_set_dirty,
+	.amixer_set_dirty_all = amixer_set_dirty_all,
+	.amixer_commit_write = amixer_commit_write,
+	.amixer_get_y = amixer_get_y,
+	.amixer_get_dirty = amixer_get_dirty,
+
+	.dai_get_ctrl_blk = dai_get_ctrl_blk,
+	.dai_put_ctrl_blk = dai_put_ctrl_blk,
+	.dai_srt_set_srco = dai_srt_set_srco,
+	.dai_srt_set_srcm = dai_srt_set_srcm,
+	.dai_srt_set_rsr = dai_srt_set_rsr,
+	.dai_srt_set_drat = dai_srt_set_drat,
+	.dai_srt_set_ec = dai_srt_set_ec,
+	.dai_srt_set_et = dai_srt_set_et,
+	.dai_commit_write = dai_commit_write,
+
+	.dao_get_ctrl_blk = dao_get_ctrl_blk,
+	.dao_put_ctrl_blk = dao_put_ctrl_blk,
+	.dao_set_spos = dao_set_spos,
+	.dao_commit_write = dao_commit_write,
+	.dao_get_spos = dao_get_spos,
+
+	.daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk,
+	.daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk,
+	.daio_mgr_enb_dai = daio_mgr_enb_dai,
+	.daio_mgr_dsb_dai = daio_mgr_dsb_dai,
+	.daio_mgr_enb_dao = daio_mgr_enb_dao,
+	.daio_mgr_dsb_dao = daio_mgr_dsb_dao,
+	.daio_mgr_dao_init = daio_mgr_dao_init,
+	.daio_mgr_set_imaparc = daio_mgr_set_imaparc,
+	.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
+	.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
+	.daio_mgr_commit_write = daio_mgr_commit_write,
+};
+
+int __devinit create_20k2_hw_obj(struct hw **rhw)
+{
+	struct hw20k2 *hw20k2;
+
+	*rhw = NULL;
+	hw20k2 = kzalloc(sizeof(*hw20k2), GFP_KERNEL);
+	if (!hw20k2)
+		return -ENOMEM;
+
+	hw20k2->hw = ct20k2_preset;
+	*rhw = &hw20k2->hw;
+
+	return 0;
+}
+
+int destroy_20k2_hw_obj(struct hw *hw)
+{
+	if (hw->io_base)
+		hw_card_shutdown(hw);
+
+	kfree(hw);
+	return 0;
+}
diff --git a/sound/pci/ctxfi/cthw20k2.h b/sound/pci/ctxfi/cthw20k2.h
new file mode 100644
index 00000000000..d2b7daab681
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k2.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k2.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHW20K2_H
+#define CTHW20K2_H
+
+#include "cthardware.h"
+
+int create_20k2_hw_obj(struct hw **rhw);
+int destroy_20k2_hw_obj(struct hw *hw);
+
+#endif /* CTHW20K2_H */
diff --git a/sound/pci/ctxfi/ctimap.c b/sound/pci/ctxfi/ctimap.c
new file mode 100644
index 00000000000..0b73368a4df
--- /dev/null
+++ b/sound/pci/ctxfi/ctimap.c
@@ -0,0 +1,112 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctimap.c
+ *
+ * @Brief
+ * This file contains the implementation of generic input mapper operations
+ * for input mapper management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#include "ctimap.h"
+#include <linux/slab.h>
+
+int input_mapper_add(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data)
+{
+	struct list_head *pos, *pre, *head;
+	struct imapper *pre_ent, *pos_ent;
+
+	head = mappers;
+
+	if (list_empty(head)) {
+		entry->next = entry->addr;
+		map_op(data, entry);
+		list_add(&entry->list, head);
+		return 0;
+	}
+
+	list_for_each(pos, head) {
+		pos_ent = list_entry(pos, struct imapper, list);
+		if (pos_ent->slot > entry->slot) {
+			/* found a position in list */
+			break;
+		}
+	}
+
+	if (pos != head) {
+		pre = pos->prev;
+		if (pre == head)
+			pre = head->prev;
+
+		__list_add(&entry->list, pos->prev, pos);
+	} else {
+		pre = head->prev;
+		pos = head->next;
+		list_add_tail(&entry->list, head);
+	}
+
+	pre_ent = list_entry(pre, struct imapper, list);
+	pos_ent = list_entry(pos, struct imapper, list);
+
+	entry->next = pos_ent->addr;
+	map_op(data, entry);
+	pre_ent->next = entry->addr;
+	map_op(data, pre_ent);
+
+	return 0;
+}
+
+int input_mapper_delete(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data)
+{
+	struct list_head *next, *pre, *head;
+	struct imapper *pre_ent, *next_ent;
+
+	head = mappers;
+
+	if (list_empty(head))
+		return 0;
+
+	pre = (entry->list.prev == head) ? head->prev : entry->list.prev;
+	next = (entry->list.next == head) ? head->next : entry->list.next;
+
+	if (pre == &entry->list) {
+		/* entry is the only one node in mappers list */
+		entry->next = entry->addr = entry->user = entry->slot = 0;
+		map_op(data, entry);
+		list_del(&entry->list);
+		return 0;
+	}
+
+	pre_ent = list_entry(pre, struct imapper, list);
+	next_ent = list_entry(next, struct imapper, list);
+
+	pre_ent->next = next_ent->addr;
+	map_op(data, pre_ent);
+	list_del(&entry->list);
+
+	return 0;
+}
+
+void free_input_mapper_list(struct list_head *head)
+{
+	struct imapper *entry;
+	struct list_head *pos;
+
+	while (!list_empty(head)) {
+		pos = head->next;
+		list_del(pos);
+		entry = list_entry(pos, struct imapper, list);
+		kfree(entry);
+	}
+}
+
diff --git a/sound/pci/ctxfi/ctimap.h b/sound/pci/ctxfi/ctimap.h
new file mode 100644
index 00000000000..53ccf9be8b6
--- /dev/null
+++ b/sound/pci/ctxfi/ctimap.h
@@ -0,0 +1,40 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctimap.h
+ *
+ * @Brief
+ * This file contains the definition of generic input mapper operations
+ * for input mapper management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#ifndef CTIMAP_H
+#define CTIMAP_H
+
+#include <linux/list.h>
+
+struct imapper {
+	unsigned short slot; /* the id of the slot containing input data */
+	unsigned short user; /* the id of the user resource consuming data */
+	unsigned short addr; /* the input mapper ram id */
+	unsigned short next; /* the next input mapper ram id */
+	struct list_head	list;
+};
+
+int input_mapper_add(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data);
+
+int input_mapper_delete(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data);
+
+void free_input_mapper_list(struct list_head *mappers);
+
+#endif /* CTIMAP_H */
diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
new file mode 100644
index 00000000000..666722d9de4
--- /dev/null
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -0,0 +1,1123 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctmixer.c
+ *
+ * @Brief
+ * This file contains the implementation of alsa mixer device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 28 2008
+ *
+ */
+
+
+#include "ctmixer.h"
+#include "ctamixer.h"
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/asoundef.h>
+#include <sound/pcm.h>
+#include <sound/tlv.h>
+
+enum CT_SUM_CTL {
+	SUM_IN_F,
+	SUM_IN_R,
+	SUM_IN_C,
+	SUM_IN_S,
+	SUM_IN_F_C,
+
+	NUM_CT_SUMS
+};
+
+enum CT_AMIXER_CTL {
+	/* volume control mixers */
+	AMIXER_MASTER_F,
+	AMIXER_MASTER_R,
+	AMIXER_MASTER_C,
+	AMIXER_MASTER_S,
+	AMIXER_PCM_F,
+	AMIXER_PCM_R,
+	AMIXER_PCM_C,
+	AMIXER_PCM_S,
+	AMIXER_SPDIFI,
+	AMIXER_LINEIN,
+	AMIXER_MIC,
+	AMIXER_SPDIFO,
+	AMIXER_WAVE_F,
+	AMIXER_WAVE_R,
+	AMIXER_WAVE_C,
+	AMIXER_WAVE_S,
+	AMIXER_MASTER_F_C,
+	AMIXER_PCM_F_C,
+	AMIXER_SPDIFI_C,
+	AMIXER_LINEIN_C,
+	AMIXER_MIC_C,
+
+	/* this should always be the last one */
+	NUM_CT_AMIXERS
+};
+
+enum CTALSA_MIXER_CTL {
+	/* volume control mixers */
+	MIXER_MASTER_P,
+	MIXER_PCM_P,
+	MIXER_LINEIN_P,
+	MIXER_MIC_P,
+	MIXER_SPDIFI_P,
+	MIXER_SPDIFO_P,
+	MIXER_WAVEF_P,
+	MIXER_WAVER_P,
+	MIXER_WAVEC_P,
+	MIXER_WAVES_P,
+	MIXER_MASTER_C,
+	MIXER_PCM_C,
+	MIXER_LINEIN_C,
+	MIXER_MIC_C,
+	MIXER_SPDIFI_C,
+
+	/* switch control mixers */
+	MIXER_PCM_C_S,
+	MIXER_LINEIN_C_S,
+	MIXER_MIC_C_S,
+	MIXER_SPDIFI_C_S,
+	MIXER_LINEIN_P_S,
+	MIXER_SPDIFO_P_S,
+	MIXER_SPDIFI_P_S,
+	MIXER_WAVEF_P_S,
+	MIXER_WAVER_P_S,
+	MIXER_WAVEC_P_S,
+	MIXER_WAVES_P_S,
+	MIXER_DIGITAL_IO_S,
+	MIXER_IEC958_MASK,
+	MIXER_IEC958_DEFAULT,
+	MIXER_IEC958_STREAM,
+
+	/* this should always be the last one */
+	NUM_CTALSA_MIXERS
+};
+
+#define VOL_MIXER_START		MIXER_MASTER_P
+#define VOL_MIXER_END		MIXER_SPDIFI_C
+#define VOL_MIXER_NUM		(VOL_MIXER_END - VOL_MIXER_START + 1)
+#define SWH_MIXER_START		MIXER_PCM_C_S
+#define SWH_MIXER_END		MIXER_DIGITAL_IO_S
+#define SWH_CAPTURE_START	MIXER_PCM_C_S
+#define SWH_CAPTURE_END		MIXER_SPDIFI_C_S
+
+#define CHN_NUM		2
+
+struct ct_kcontrol_init {
+	unsigned char ctl;
+	char *name;
+};
+
+static struct ct_kcontrol_init
+ct_kcontrol_init_table[NUM_CTALSA_MIXERS] = {
+	[MIXER_MASTER_P] = {
+		.ctl = 1,
+		.name = "Master Playback Volume",
+	},
+	[MIXER_MASTER_C] = {
+		.ctl = 1,
+		.name = "Master Capture Volume",
+	},
+	[MIXER_PCM_P] = {
+		.ctl = 1,
+		.name = "PCM Playback Volume",
+	},
+	[MIXER_PCM_C] = {
+		.ctl = 1,
+		.name = "PCM Capture Volume",
+	},
+	[MIXER_LINEIN_P] = {
+		.ctl = 1,
+		.name = "Line-in Playback Volume",
+	},
+	[MIXER_LINEIN_C] = {
+		.ctl = 1,
+		.name = "Line-in Capture Volume",
+	},
+	[MIXER_MIC_P] = {
+		.ctl = 1,
+		.name = "Mic Playback Volume",
+	},
+	[MIXER_MIC_C] = {
+		.ctl = 1,
+		.name = "Mic Capture Volume",
+	},
+	[MIXER_SPDIFI_P] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Playback Volume",
+	},
+	[MIXER_SPDIFI_C] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Capture Volume",
+	},
+	[MIXER_SPDIFO_P] = {
+		.ctl = 1,
+		.name = "S/PDIF-out Playback Volume",
+	},
+	[MIXER_WAVEF_P] = {
+		.ctl = 1,
+		.name = "Front Playback Volume",
+	},
+	[MIXER_WAVES_P] = {
+		.ctl = 1,
+		.name = "Side Playback Volume",
+	},
+	[MIXER_WAVEC_P] = {
+		.ctl = 1,
+		.name = "Center/LFE Playback Volume",
+	},
+	[MIXER_WAVER_P] = {
+		.ctl = 1,
+		.name = "Surround Playback Volume",
+	},
+
+	[MIXER_PCM_C_S] = {
+		.ctl = 1,
+		.name = "PCM Capture Switch",
+	},
+	[MIXER_LINEIN_C_S] = {
+		.ctl = 1,
+		.name = "Line-in Capture Switch",
+	},
+	[MIXER_MIC_C_S] = {
+		.ctl = 1,
+		.name = "Mic Capture Switch",
+	},
+	[MIXER_SPDIFI_C_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Capture Switch",
+	},
+	[MIXER_LINEIN_P_S] = {
+		.ctl = 1,
+		.name = "Line-in Playback Switch",
+	},
+	[MIXER_SPDIFO_P_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-out Playback Switch",
+	},
+	[MIXER_SPDIFI_P_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Playback Switch",
+	},
+	[MIXER_WAVEF_P_S] = {
+		.ctl = 1,
+		.name = "Front Playback Switch",
+	},
+	[MIXER_WAVES_P_S] = {
+		.ctl = 1,
+		.name = "Side Playback Switch",
+	},
+	[MIXER_WAVEC_P_S] = {
+		.ctl = 1,
+		.name = "Center/LFE Playback Switch",
+	},
+	[MIXER_WAVER_P_S] = {
+		.ctl = 1,
+		.name = "Surround Playback Switch",
+	},
+	[MIXER_DIGITAL_IO_S] = {
+		.ctl = 0,
+		.name = "Digit-IO Playback Switch",
+	},
+};
+
+static void
+ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type);
+
+static void
+ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type);
+
+static struct snd_kcontrol *kctls[2] = {NULL};
+
+static enum CT_AMIXER_CTL get_amixer_index(enum CTALSA_MIXER_CTL alsa_index)
+{
+	switch (alsa_index) {
+	case MIXER_MASTER_P:	return AMIXER_MASTER_F;
+	case MIXER_MASTER_C:	return AMIXER_MASTER_F_C;
+	case MIXER_PCM_P:	return AMIXER_PCM_F;
+	case MIXER_PCM_C:
+	case MIXER_PCM_C_S:	return AMIXER_PCM_F_C;
+	case MIXER_LINEIN_P:	return AMIXER_LINEIN;
+	case MIXER_LINEIN_C:
+	case MIXER_LINEIN_C_S:	return AMIXER_LINEIN_C;
+	case MIXER_MIC_P:	return AMIXER_MIC;
+	case MIXER_MIC_C:
+	case MIXER_MIC_C_S:	return AMIXER_MIC_C;
+	case MIXER_SPDIFI_P:	return AMIXER_SPDIFI;
+	case MIXER_SPDIFI_C:
+	case MIXER_SPDIFI_C_S:	return AMIXER_SPDIFI_C;
+	case MIXER_SPDIFO_P:	return AMIXER_SPDIFO;
+	case MIXER_WAVEF_P:	return AMIXER_WAVE_F;
+	case MIXER_WAVES_P:	return AMIXER_WAVE_S;
+	case MIXER_WAVEC_P:	return AMIXER_WAVE_C;
+	case MIXER_WAVER_P:	return AMIXER_WAVE_R;
+	default:		return NUM_CT_AMIXERS;
+	}
+}
+
+static enum CT_AMIXER_CTL get_recording_amixer(enum CT_AMIXER_CTL index)
+{
+	switch (index) {
+	case AMIXER_MASTER_F:	return AMIXER_MASTER_F_C;
+	case AMIXER_PCM_F:	return AMIXER_PCM_F_C;
+	case AMIXER_SPDIFI:	return AMIXER_SPDIFI_C;
+	case AMIXER_LINEIN:	return AMIXER_LINEIN_C;
+	case AMIXER_MIC:	return AMIXER_MIC_C;
+	default:		return NUM_CT_AMIXERS;
+	}
+}
+
+static unsigned char
+get_switch_state(struct ct_mixer *mixer, enum CTALSA_MIXER_CTL type)
+{
+	return (mixer->switch_state & (0x1 << (type - SWH_MIXER_START)))
+		? 1 : 0;
+}
+
+static void
+set_switch_state(struct ct_mixer *mixer,
+		 enum CTALSA_MIXER_CTL type, unsigned char state)
+{
+	if (state)
+		mixer->switch_state |= (0x1 << (type - SWH_MIXER_START));
+	else
+		mixer->switch_state &= ~(0x1 << (type - SWH_MIXER_START));
+}
+
+#if 0 /* not used */
+/* Map integer value ranging from 0 to 65535 to 14-bit float value ranging
+ * from 2^-6 to (1+1023/1024) */
+static unsigned int uint16_to_float14(unsigned int x)
+{
+	unsigned int i;
+
+	if (x < 17)
+		return 0;
+
+	x *= 2031;
+	x /= 65535;
+	x += 16;
+
+	/* i <= 6 */
+	for (i = 0; !(x & 0x400); i++)
+		x <<= 1;
+
+	x = (((7 - i) & 0x7) << 10) | (x & 0x3ff);
+
+	return x;
+}
+
+static unsigned int float14_to_uint16(unsigned int x)
+{
+	unsigned int e;
+
+	if (!x)
+		return x;
+
+	e = (x >> 10) & 0x7;
+	x &= 0x3ff;
+	x += 1024;
+	x >>= (7 - e);
+	x -= 16;
+	x *= 65535;
+	x /= 2031;
+
+	return x;
+}
+#endif /* not used */
+
+#define VOL_SCALE	0x1c
+#define VOL_MAX		0x100
+
+static const DECLARE_TLV_DB_SCALE(ct_vol_db_scale, -6400, 25, 1);
+
+static int ct_alsa_mix_volume_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = VOL_MAX;
+
+	return 0;
+}
+
+static int ct_alsa_mix_volume_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value);
+	struct amixer *amixer;
+	int i, val;
+
+	for (i = 0; i < 2; i++) {
+		amixer = ((struct ct_mixer *)atc->mixer)->
+						amixers[type*CHN_NUM+i];
+		val = amixer->ops->get_scale(amixer) / VOL_SCALE;
+		if (val < 0)
+			val = 0;
+		else if (val > VOL_MAX)
+			val = VOL_MAX;
+		ucontrol->value.integer.value[i] = val;
+	}
+
+	return 0;
+}
+
+static int ct_alsa_mix_volume_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	struct ct_mixer *mixer = atc->mixer;
+	enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value);
+	struct amixer *amixer;
+	int i, j, val, oval, change = 0;
+
+	for (i = 0; i < 2; i++) {
+		val = ucontrol->value.integer.value[i];
+		if (val < 0)
+			val = 0;
+		else if (val > VOL_MAX)
+			val = VOL_MAX;
+		val *= VOL_SCALE;
+		amixer = mixer->amixers[type*CHN_NUM+i];
+		oval = amixer->ops->get_scale(amixer);
+		if (val != oval) {
+			amixer->ops->set_scale(amixer, val);
+			amixer->ops->commit_write(amixer);
+			change = 1;
+			/* Synchronize Master/PCM playback AMIXERs. */
+			if (AMIXER_MASTER_F == type || AMIXER_PCM_F == type) {
+				for (j = 1; j < 4; j++) {
+					amixer = mixer->
+						amixers[(type+j)*CHN_NUM+i];
+					amixer->ops->set_scale(amixer, val);
+					amixer->ops->commit_write(amixer);
+				}
+			}
+		}
+	}
+
+	return change;
+}
+
+static struct snd_kcontrol_new vol_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info		= ct_alsa_mix_volume_info,
+	.get		= ct_alsa_mix_volume_get,
+	.put		= ct_alsa_mix_volume_put,
+	.tlv		= { .p =  ct_vol_db_scale },
+};
+
+static void
+do_line_mic_switch(struct ct_atc *atc, enum CTALSA_MIXER_CTL type)
+{
+
+	if (MIXER_LINEIN_C_S == type) {
+		atc->select_line_in(atc);
+		set_switch_state(atc->mixer, MIXER_MIC_C_S, 0);
+		snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE,
+							&kctls[1]->id);
+	} else if (MIXER_MIC_C_S == type) {
+		atc->select_mic_in(atc);
+		set_switch_state(atc->mixer, MIXER_LINEIN_C_S, 0);
+		snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE,
+							&kctls[0]->id);
+	}
+}
+
+static void
+do_digit_io_switch(struct ct_atc *atc, int state)
+{
+	struct ct_mixer *mixer = atc->mixer;
+
+	if (state) {
+		atc->select_digit_io(atc);
+		atc->spdif_out_unmute(atc,
+				get_switch_state(mixer, MIXER_SPDIFO_P_S));
+		atc->spdif_in_unmute(atc, 1);
+		atc->line_in_unmute(atc, 0);
+		return;
+	}
+
+	if (get_switch_state(mixer, MIXER_LINEIN_C_S))
+		atc->select_line_in(atc);
+	else if (get_switch_state(mixer, MIXER_MIC_C_S))
+		atc->select_mic_in(atc);
+
+	atc->spdif_out_unmute(atc, 0);
+	atc->spdif_in_unmute(atc, 0);
+	atc->line_in_unmute(atc, 1);
+	return;
+}
+
+static int ct_alsa_mix_switch_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	uinfo->value.integer.step = 1;
+
+	return 0;
+}
+
+static int ct_alsa_mix_switch_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_mixer *mixer =
+		((struct ct_atc *)snd_kcontrol_chip(kcontrol))->mixer;
+	enum CTALSA_MIXER_CTL type = kcontrol->private_value;
+
+	ucontrol->value.integer.value[0] = get_switch_state(mixer, type);
+	return 0;
+}
+
+static int ct_alsa_mix_switch_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	struct ct_mixer *mixer = atc->mixer;
+	enum CTALSA_MIXER_CTL type = kcontrol->private_value;
+	int state;
+
+	state = ucontrol->value.integer.value[0];
+	if (get_switch_state(mixer, type) == state)
+		return 0;
+
+	set_switch_state(mixer, type, state);
+	/* Do changes in mixer. */
+	if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
+		if (state) {
+			ct_mixer_recording_select(mixer,
+						  get_amixer_index(type));
+		} else {
+			ct_mixer_recording_unselect(mixer,
+						    get_amixer_index(type));
+		}
+	}
+	/* Do changes out of mixer. */
+	if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
+		do_line_mic_switch(atc, type);
+	else if (MIXER_WAVEF_P_S == type)
+		atc->line_front_unmute(atc, state);
+	else if (MIXER_WAVES_P_S == type)
+		atc->line_surround_unmute(atc, state);
+	else if (MIXER_WAVEC_P_S == type)
+		atc->line_clfe_unmute(atc, state);
+	else if (MIXER_WAVER_P_S == type)
+		atc->line_rear_unmute(atc, state);
+	else if (MIXER_LINEIN_P_S == type)
+		atc->line_in_unmute(atc, state);
+	else if (MIXER_SPDIFO_P_S == type)
+		atc->spdif_out_unmute(atc, state);
+	else if (MIXER_SPDIFI_P_S == type)
+		atc->spdif_in_unmute(atc, state);
+	else if (MIXER_DIGITAL_IO_S == type)
+		do_digit_io_switch(atc, state);
+
+	return 1;
+}
+
+static struct snd_kcontrol_new swh_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info		= ct_alsa_mix_switch_info,
+	.get		= ct_alsa_mix_switch_get,
+	.put		= ct_alsa_mix_switch_put
+};
+
+static int ct_spdif_info(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int ct_spdif_get_mask(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.iec958.status[0] = 0xff;
+	ucontrol->value.iec958.status[1] = 0xff;
+	ucontrol->value.iec958.status[2] = 0xff;
+	ucontrol->value.iec958.status[3] = 0xff;
+	return 0;
+}
+
+static int ct_spdif_default_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	unsigned int status = SNDRV_PCM_DEFAULT_CON_SPDIF;
+
+	ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+	ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+	ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+	ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+
+	return 0;
+}
+
+static int ct_spdif_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	unsigned int status;
+
+	atc->spdif_out_get_status(atc, &status);
+	ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+	ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+	ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+	ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+
+	return 0;
+}
+
+static int ct_spdif_put(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	int change;
+	unsigned int status, old_status;
+
+	status = (ucontrol->value.iec958.status[0] << 0) |
+		 (ucontrol->value.iec958.status[1] << 8) |
+		 (ucontrol->value.iec958.status[2] << 16) |
+		 (ucontrol->value.iec958.status[3] << 24);
+
+	atc->spdif_out_get_status(atc, &old_status);
+	change = (old_status != status);
+	if (change)
+		atc->spdif_out_set_status(atc, status);
+
+	return change;
+}
+
+static struct snd_kcontrol_new iec958_mask_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READ,
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_get_mask,
+	.private_value	= MIXER_IEC958_MASK
+};
+
+static struct snd_kcontrol_new iec958_default_ctl = {
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_default_get,
+	.put		= ct_spdif_put,
+	.private_value	= MIXER_IEC958_DEFAULT
+};
+
+static struct snd_kcontrol_new iec958_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_get,
+	.put		= ct_spdif_put,
+	.private_value	= MIXER_IEC958_STREAM
+};
+
+#define NUM_IEC958_CTL 3
+
+static int
+ct_mixer_kcontrol_new(struct ct_mixer *mixer, struct snd_kcontrol_new *new)
+{
+	struct snd_kcontrol *kctl;
+	int err;
+
+	kctl = snd_ctl_new1(new, mixer->atc);
+	if (NULL == kctl)
+		return -ENOMEM;
+
+	if (SNDRV_CTL_ELEM_IFACE_PCM == kctl->id.iface)
+		kctl->id.device = IEC958;
+
+	err = snd_ctl_add(mixer->atc->card, kctl);
+	if (err)
+		return err;
+
+	switch (new->private_value) {
+	case MIXER_LINEIN_C_S:
+		kctls[0] = kctl; break;
+	case MIXER_MIC_C_S:
+		kctls[1] = kctl; break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ct_mixer_kcontrols_create(struct ct_mixer *mixer)
+{
+	enum CTALSA_MIXER_CTL type;
+	struct ct_atc *atc = mixer->atc;
+	int err;
+
+	/* Create snd kcontrol instances on demand */
+	for (type = VOL_MIXER_START; type <= VOL_MIXER_END; type++) {
+		if (ct_kcontrol_init_table[type].ctl) {
+			vol_ctl.name = ct_kcontrol_init_table[type].name;
+			vol_ctl.private_value = (unsigned long)type;
+			err = ct_mixer_kcontrol_new(mixer, &vol_ctl);
+			if (err)
+				return err;
+		}
+	}
+
+	ct_kcontrol_init_table[MIXER_DIGITAL_IO_S].ctl =
+					atc->have_digit_io_switch(atc);
+	for (type = SWH_MIXER_START; type <= SWH_MIXER_END; type++) {
+		if (ct_kcontrol_init_table[type].ctl) {
+			swh_ctl.name = ct_kcontrol_init_table[type].name;
+			swh_ctl.private_value = (unsigned long)type;
+			err = ct_mixer_kcontrol_new(mixer, &swh_ctl);
+			if (err)
+				return err;
+		}
+	}
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_mask_ctl);
+	if (err)
+		return err;
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_default_ctl);
+	if (err)
+		return err;
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_ctl);
+	if (err)
+		return err;
+
+	atc->line_front_unmute(atc, 1);
+	set_switch_state(mixer, MIXER_WAVEF_P_S, 1);
+	atc->line_surround_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVES_P_S, 0);
+	atc->line_clfe_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVEC_P_S, 0);
+	atc->line_rear_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVER_P_S, 0);
+	atc->spdif_out_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_SPDIFO_P_S, 0);
+	atc->line_in_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_LINEIN_P_S, 0);
+	atc->spdif_in_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_SPDIFI_P_S, 0);
+
+	set_switch_state(mixer, MIXER_PCM_C_S, 1);
+	set_switch_state(mixer, MIXER_LINEIN_C_S, 1);
+	set_switch_state(mixer, MIXER_SPDIFI_C_S, 1);
+
+	return 0;
+}
+
+static void
+ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type)
+{
+	struct amixer *amix_d;
+	struct sum *sum_c;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		amix_d = mixer->amixers[type*CHN_NUM+i];
+		sum_c = mixer->sums[SUM_IN_F_C*CHN_NUM+i];
+		amix_d->ops->set_sum(amix_d, sum_c);
+		amix_d->ops->commit_write(amix_d);
+	}
+}
+
+static void
+ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type)
+{
+	struct amixer *amix_d;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		amix_d = mixer->amixers[type*CHN_NUM+i];
+		amix_d->ops->set_sum(amix_d, NULL);
+		amix_d->ops->commit_write(amix_d);
+	}
+}
+
+static int ct_mixer_get_resources(struct ct_mixer *mixer)
+{
+	struct sum_mgr *sum_mgr;
+	struct sum *sum;
+	struct sum_desc sum_desc = {0};
+	struct amixer_mgr *amixer_mgr;
+	struct amixer *amixer;
+	struct amixer_desc am_desc = {0};
+	int err;
+	int i;
+
+	/* Allocate sum resources for mixer obj */
+	sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
+	sum_desc.msr = mixer->atc->msr;
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		err = sum_mgr->get_sum(sum_mgr, &sum_desc, &sum);
+		if (err) {
+			printk(KERN_ERR "ctxfi:Failed to get sum resources for "
+					  "front output!\n");
+			break;
+		}
+		mixer->sums[i] = sum;
+	}
+	if (err)
+		goto error1;
+
+	/* Allocate amixer resources for mixer obj */
+	amixer_mgr = (struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER];
+	am_desc.msr = mixer->atc->msr;
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &am_desc, &amixer);
+		if (err) {
+			printk(KERN_ERR "ctxfi:Failed to get amixer resources "
+			       "for mixer obj!\n");
+			break;
+		}
+		mixer->amixers[i] = amixer;
+	}
+	if (err)
+		goto error2;
+
+	return 0;
+
+error2:
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		if (NULL != mixer->amixers[i]) {
+			amixer = mixer->amixers[i];
+			amixer_mgr->put_amixer(amixer_mgr, amixer);
+			mixer->amixers[i] = NULL;
+		}
+	}
+error1:
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		if (NULL != mixer->sums[i]) {
+			sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]);
+			mixer->sums[i] = NULL;
+		}
+	}
+
+	return err;
+}
+
+static int ct_mixer_get_mem(struct ct_mixer **rmixer)
+{
+	struct ct_mixer *mixer;
+	int err;
+
+	*rmixer = NULL;
+	/* Allocate mem for mixer obj */
+	mixer = kzalloc(sizeof(*mixer), GFP_KERNEL);
+	if (NULL == mixer)
+		return -ENOMEM;
+
+	mixer->amixers = kzalloc(sizeof(void *)*(NUM_CT_AMIXERS*CHN_NUM),
+				 GFP_KERNEL);
+	if (NULL == mixer->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mixer->sums = kzalloc(sizeof(void *)*(NUM_CT_SUMS*CHN_NUM), GFP_KERNEL);
+	if (NULL == mixer->sums) {
+		err = -ENOMEM;
+		goto error2;
+	}
+
+	*rmixer = mixer;
+	return 0;
+
+error2:
+	kfree(mixer->amixers);
+error1:
+	kfree(mixer);
+	return err;
+}
+
+static int ct_mixer_topology_build(struct ct_mixer *mixer)
+{
+	struct sum *sum;
+	struct amixer *amix_d, *amix_s;
+	enum CT_AMIXER_CTL i, j;
+
+	/* Build topology from destination to source */
+
+	/* Set up Master mixer */
+	for (i = AMIXER_MASTER_F, j = SUM_IN_F;
+					i <= AMIXER_MASTER_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		sum = mixer->sums[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		sum = mixer->sums[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+	}
+
+	/* Set up Wave-out mixer */
+	for (i = AMIXER_WAVE_F, j = AMIXER_MASTER_F;
+					i <= AMIXER_WAVE_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		amix_s = mixer->amixers[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		amix_s = mixer->amixers[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+	}
+
+	/* Set up S/PDIF-out mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM];
+	amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+	amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM+1];
+	amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+
+	/* Set up PCM-in mixer */
+	for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		sum = mixer->sums[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		sum = mixer->sums[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	}
+
+	/* Set up Line-in mixer */
+	amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Mic-in mixer */
+	amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up S/PDIF-in mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Master recording mixer */
+	amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+	amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+
+	/* Set up PCM-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Line-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Mic-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up S/PDIF-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	return 0;
+}
+
+static int mixer_set_input_port(struct amixer *amixer, struct rsc *rsc)
+{
+	amixer->ops->set_input(amixer, rsc);
+	amixer->ops->commit_write(amixer);
+
+	return 0;
+}
+
+static enum CT_AMIXER_CTL port_to_amixer(enum MIXER_PORT_T type)
+{
+	switch (type) {
+	case MIX_WAVE_FRONT:	return AMIXER_WAVE_F;
+	case MIX_WAVE_SURROUND:	return AMIXER_WAVE_S;
+	case MIX_WAVE_CENTLFE:	return AMIXER_WAVE_C;
+	case MIX_WAVE_REAR:	return AMIXER_WAVE_R;
+	case MIX_PCMO_FRONT:	return AMIXER_MASTER_F_C;
+	case MIX_SPDIF_OUT:	return AMIXER_SPDIFO;
+	case MIX_LINE_IN:	return AMIXER_LINEIN;
+	case MIX_MIC_IN:	return AMIXER_MIC;
+	case MIX_SPDIF_IN:	return AMIXER_SPDIFI;
+	case MIX_PCMI_FRONT:	return AMIXER_PCM_F;
+	case MIX_PCMI_SURROUND:	return AMIXER_PCM_S;
+	case MIX_PCMI_CENTLFE:	return AMIXER_PCM_C;
+	case MIX_PCMI_REAR:	return AMIXER_PCM_R;
+	default: 		return 0;
+	}
+}
+
+static int mixer_get_output_ports(struct ct_mixer *mixer,
+				  enum MIXER_PORT_T type,
+				  struct rsc **rleft, struct rsc **rright)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	if (NULL != rleft)
+		*rleft = &((struct amixer *)mixer->amixers[amix*CHN_NUM])->rsc;
+
+	if (NULL != rright)
+		*rright =
+			&((struct amixer *)mixer->amixers[amix*CHN_NUM+1])->rsc;
+
+	return 0;
+}
+
+static int mixer_set_input_left(struct ct_mixer *mixer,
+				enum MIXER_PORT_T type, struct rsc *rsc)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc);
+	amix = get_recording_amixer(amix);
+	if (amix < NUM_CT_AMIXERS)
+		mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc);
+
+	return 0;
+}
+
+static int
+mixer_set_input_right(struct ct_mixer *mixer,
+		      enum MIXER_PORT_T type, struct rsc *rsc)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc);
+	amix = get_recording_amixer(amix);
+	if (amix < NUM_CT_AMIXERS)
+		mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc);
+
+	return 0;
+}
+
+int ct_mixer_destroy(struct ct_mixer *mixer)
+{
+	struct sum_mgr *sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
+	struct amixer_mgr *amixer_mgr =
+			(struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER];
+	struct amixer *amixer;
+	int i = 0;
+
+	/* Release amixer resources */
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		if (NULL != mixer->amixers[i]) {
+			amixer = mixer->amixers[i];
+			amixer_mgr->put_amixer(amixer_mgr, amixer);
+		}
+	}
+
+	/* Release sum resources */
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		if (NULL != mixer->sums[i])
+			sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]);
+	}
+
+	/* Release mem assigned to mixer object */
+	kfree(mixer->sums);
+	kfree(mixer->amixers);
+	kfree(mixer);
+
+	return 0;
+}
+
+int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer)
+{
+	struct ct_mixer *mixer;
+	int err;
+
+	*rmixer = NULL;
+
+	/* Allocate mem for mixer obj */
+	err = ct_mixer_get_mem(&mixer);
+	if (err)
+		return err;
+
+	mixer->switch_state = 0;
+	mixer->atc = atc;
+	/* Set operations */
+	mixer->get_output_ports = mixer_get_output_ports;
+	mixer->set_input_left = mixer_set_input_left;
+	mixer->set_input_right = mixer_set_input_right;
+
+	/* Allocate chip resources for mixer obj */
+	err = ct_mixer_get_resources(mixer);
+	if (err)
+		goto error;
+
+	/* Build internal mixer topology */
+	ct_mixer_topology_build(mixer);
+
+	*rmixer = mixer;
+
+	return 0;
+
+error:
+	ct_mixer_destroy(mixer);
+	return err;
+}
+
+int ct_alsa_mix_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name)
+{
+	int err;
+
+	/* Create snd kcontrol instances on demand */
+	/* vol_ctl.device = swh_ctl.device = device; */ /* better w/ device 0 */
+	err = ct_mixer_kcontrols_create((struct ct_mixer *)atc->mixer);
+	if (err)
+		return err;
+
+	strcpy(atc->card->mixername, device_name);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctmixer.h b/sound/pci/ctxfi/ctmixer.h
new file mode 100644
index 00000000000..e2d96ebde74
--- /dev/null
+++ b/sound/pci/ctxfi/ctmixer.h
@@ -0,0 +1,67 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctmixer.h
+ *
+ * @Brief
+ * This file contains the definition of the mixer device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTMIXER_H
+#define CTMIXER_H
+
+#include "ctatc.h"
+#include "ctresource.h"
+
+#define INIT_VOL	0x1c00
+
+enum MIXER_PORT_T {
+	MIX_WAVE_FRONT,
+	MIX_WAVE_REAR,
+	MIX_WAVE_CENTLFE,
+	MIX_WAVE_SURROUND,
+	MIX_SPDIF_OUT,
+	MIX_PCMO_FRONT,
+	MIX_MIC_IN,
+	MIX_LINE_IN,
+	MIX_SPDIF_IN,
+	MIX_PCMI_FRONT,
+	MIX_PCMI_REAR,
+	MIX_PCMI_CENTLFE,
+	MIX_PCMI_SURROUND,
+
+	NUM_MIX_PORTS
+};
+
+/* alsa mixer descriptor */
+struct ct_mixer {
+	struct ct_atc *atc;
+
+	void **amixers;		/* amixer resources for volume control */
+	void **sums;		/* sum resources for signal collection */
+	unsigned int switch_state; /* A bit-map to indicate state of switches */
+
+	int (*get_output_ports)(struct ct_mixer *mixer, enum MIXER_PORT_T type,
+				  struct rsc **rleft, struct rsc **rright);
+
+	int (*set_input_left)(struct ct_mixer *mixer,
+			      enum MIXER_PORT_T type, struct rsc *rsc);
+	int (*set_input_right)(struct ct_mixer *mixer,
+			       enum MIXER_PORT_T type, struct rsc *rsc);
+};
+
+int ct_alsa_mix_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name);
+int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer);
+int ct_mixer_destroy(struct ct_mixer *mixer);
+
+#endif /* CTMIXER_H */
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
new file mode 100644
index 00000000000..9e5c0c4da72
--- /dev/null
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -0,0 +1,426 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctpcm.c
+ *
+ * @Brief
+ * This file contains the definition of the pcm device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Apr 2 2008
+ *
+ */
+
+#include "ctpcm.h"
+#include "cttimer.h"
+#include <sound/pcm.h>
+
+/* Hardware descriptions for playback */
+static struct snd_pcm_hardware ct_pcm_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID |
+				   SNDRV_PCM_INFO_PAUSE),
+	.formats		= (SNDRV_PCM_FMTBIT_U8 |
+				   SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_3LE |
+				   SNDRV_PCM_FMTBIT_S32_LE |
+				   SNDRV_PCM_FMTBIT_FLOAT_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS |
+				   SNDRV_PCM_RATE_8000_192000),
+	.rate_min		= 8000,
+	.rate_max		= 192000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (64),
+	.period_bytes_max	= (128*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+static struct snd_pcm_hardware ct_spdif_passthru_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID |
+				   SNDRV_PCM_INFO_PAUSE),
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+	.rates			= (SNDRV_PCM_RATE_48000 |
+				   SNDRV_PCM_RATE_44100 |
+				   SNDRV_PCM_RATE_32000),
+	.rate_min		= 32000,
+	.rate_max		= 48000,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (64),
+	.period_bytes_max	= (128*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+/* Hardware descriptions for capture */
+static struct snd_pcm_hardware ct_pcm_capture_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_PAUSE |
+				   SNDRV_PCM_INFO_MMAP_VALID),
+	.formats		= (SNDRV_PCM_FMTBIT_U8 |
+				   SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_3LE |
+				   SNDRV_PCM_FMTBIT_S32_LE |
+				   SNDRV_PCM_FMTBIT_FLOAT_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS |
+				   SNDRV_PCM_RATE_8000_96000),
+	.rate_min		= 8000,
+	.rate_max		= 96000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (384),
+	.period_bytes_max	= (64*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+static void ct_atc_pcm_interrupt(struct ct_atc_pcm *atc_pcm)
+{
+	struct ct_atc_pcm *apcm = atc_pcm;
+
+	if (NULL == apcm->substream)
+		return;
+
+	snd_pcm_period_elapsed(apcm->substream);
+}
+
+static void ct_atc_pcm_free_substream(struct snd_pcm_runtime *runtime)
+{
+	struct ct_atc_pcm *apcm = runtime->private_data;
+	struct ct_atc *atc = snd_pcm_substream_chip(apcm->substream);
+
+	atc->pcm_release_resources(atc, apcm);
+	ct_timer_instance_free(apcm->timer);
+	kfree(apcm);
+	runtime->private_data = NULL;
+}
+
+/* pcm playback operations */
+static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm;
+	int err;
+
+	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
+	if (NULL == apcm)
+		return -ENOMEM;
+
+	apcm->substream = substream;
+	apcm->interrupt = ct_atc_pcm_interrupt;
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
+	if (IEC958 == substream->pcm->device) {
+		runtime->hw = ct_spdif_passthru_playback_hw;
+		atc->spdif_out_passthru(atc, 1);
+	} else {
+		runtime->hw = ct_pcm_playback_hw;
+		if (FRONT == substream->pcm->device)
+			runtime->hw.channels_max = 8;
+	}
+
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					   1024, UINT_MAX);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+
+	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
+	if (!apcm->timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int ct_pcm_playback_close(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+
+	/* TODO: Notify mixer inactive. */
+	if (IEC958 == substream->pcm->device)
+		atc->spdif_out_passthru(atc, 0);
+
+	/* The ct_atc_pcm object will be freed by runtime->private_free */
+
+	return 0;
+}
+
+static int ct_pcm_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *hw_params)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct ct_atc_pcm *apcm = substream->runtime->private_data;
+	int err;
+
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+	if (err < 0)
+		return err;
+	/* clear previous resources */
+	atc->pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int ct_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct ct_atc_pcm *apcm = substream->runtime->private_data;
+
+	/* clear previous resources */
+	atc->pcm_release_resources(atc, apcm);
+	/* Free snd-allocated pages */
+	return snd_pcm_lib_free_pages(substream);
+}
+
+
+static int ct_pcm_playback_prepare(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	if (IEC958 == substream->pcm->device)
+		err = atc->spdif_passthru_playback_prepare(atc, apcm);
+	else
+		err = atc->pcm_playback_prepare(atc, apcm);
+
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: Preparing pcm playback failed!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int
+ct_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		atc->pcm_playback_start(atc, apcm);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		atc->pcm_playback_stop(atc, apcm);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+ct_pcm_playback_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long position;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	/* Read out playback position */
+	position = atc->pcm_playback_position(atc, apcm);
+	position = bytes_to_frames(runtime, position);
+	if (position >= runtime->buffer_size)
+		position = 0;
+	return position;
+}
+
+/* pcm capture operations */
+static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm;
+	int err;
+
+	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
+	if (NULL == apcm)
+		return -ENOMEM;
+
+	apcm->started = 0;
+	apcm->substream = substream;
+	apcm->interrupt = ct_atc_pcm_interrupt;
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
+	runtime->hw = ct_pcm_capture_hw;
+	runtime->hw.rate_max = atc->rsr * atc->msr;
+
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					   1024, UINT_MAX);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+
+	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
+	if (!apcm->timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int ct_pcm_capture_close(struct snd_pcm_substream *substream)
+{
+	/* The ct_atc_pcm object will be freed by runtime->private_free */
+	/* TODO: Notify mixer inactive. */
+	return 0;
+}
+
+static int ct_pcm_capture_prepare(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	err = atc->pcm_capture_prepare(atc, apcm);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: Preparing pcm capture failed!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int
+ct_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		atc->pcm_capture_start(atc, apcm);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		atc->pcm_capture_stop(atc, apcm);
+		break;
+	default:
+		atc->pcm_capture_stop(atc, apcm);
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+ct_pcm_capture_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long position;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	/* Read out playback position */
+	position = atc->pcm_capture_position(atc, apcm);
+	position = bytes_to_frames(runtime, position);
+	if (position >= runtime->buffer_size)
+		position = 0;
+	return position;
+}
+
+/* PCM operators for playback */
+static struct snd_pcm_ops ct_pcm_playback_ops = {
+	.open	 	= ct_pcm_playback_open,
+	.close		= ct_pcm_playback_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ct_pcm_hw_params,
+	.hw_free	= ct_pcm_hw_free,
+	.prepare	= ct_pcm_playback_prepare,
+	.trigger	= ct_pcm_playback_trigger,
+	.pointer	= ct_pcm_playback_pointer,
+	.page		= snd_pcm_sgbuf_ops_page,
+};
+
+/* PCM operators for capture */
+static struct snd_pcm_ops ct_pcm_capture_ops = {
+	.open	 	= ct_pcm_capture_open,
+	.close		= ct_pcm_capture_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ct_pcm_hw_params,
+	.hw_free	= ct_pcm_hw_free,
+	.prepare	= ct_pcm_capture_prepare,
+	.trigger	= ct_pcm_capture_trigger,
+	.pointer	= ct_pcm_capture_pointer,
+	.page		= snd_pcm_sgbuf_ops_page,
+};
+
+/* Create ALSA pcm device */
+int ct_alsa_pcm_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name)
+{
+	struct snd_pcm *pcm;
+	int err;
+	int playback_count, capture_count;
+
+	playback_count = (IEC958 == device) ? 1 : 8;
+	capture_count = (FRONT == device) ? 1 : 0;
+	err = snd_pcm_new(atc->card, "ctxfi", device,
+			  playback_count, capture_count, &pcm);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: snd_pcm_new failed!! Err=%d\n", err);
+		return err;
+	}
+
+	pcm->private_data = atc;
+	pcm->info_flags = 0;
+	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
+	strlcpy(pcm->name, device_name, sizeof(pcm->name));
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &ct_pcm_playback_ops);
+
+	if (FRONT == device)
+		snd_pcm_set_ops(pcm,
+				SNDRV_PCM_STREAM_CAPTURE, &ct_pcm_capture_ops);
+
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
+			snd_dma_pci_data(atc->pci), 128*1024, 128*1024);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctpcm.h b/sound/pci/ctxfi/ctpcm.h
new file mode 100644
index 00000000000..178da0dca64
--- /dev/null
+++ b/sound/pci/ctxfi/ctpcm.h
@@ -0,0 +1,27 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctpcm.h
+ *
+ * @Brief
+ * This file contains the definition of the pcm device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTPCM_H
+#define CTPCM_H
+
+#include "ctatc.h"
+
+int ct_alsa_pcm_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name);
+
+#endif /* CTPCM_H */
diff --git a/sound/pci/ctxfi/ctresource.c b/sound/pci/ctxfi/ctresource.c
new file mode 100644
index 00000000000..889c495bb7d
--- /dev/null
+++ b/sound/pci/ctxfi/ctresource.c
@@ -0,0 +1,301 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctresource.c
+ *
+ * @Brief
+ * This file contains the implementation of some generic helper functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 15 2008
+ *
+ */
+
+#include "ctresource.h"
+#include "cthardware.h"
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define AUDIO_SLOT_BLOCK_NUM 	256
+
+/* Resource allocation based on bit-map management mechanism */
+static int
+get_resource(u8 *rscs, unsigned int amount,
+	     unsigned int multi, unsigned int *ridx)
+{
+	int i, j, k, n;
+
+	/* Check whether there are sufficient resources to meet request. */
+	for (i = 0, n = multi; i < amount; i++) {
+		j = i / 8;
+		k = i % 8;
+		if (rscs[j] & ((u8)1 << k)) {
+			n = multi;
+			continue;
+		}
+		if (!(--n))
+			break; /* found sufficient contiguous resources */
+	}
+
+	if (i >= amount) {
+		/* Can not find sufficient contiguous resources */
+		return -ENOENT;
+	}
+
+	/* Mark the contiguous bits in resource bit-map as used */
+	for (n = multi; n > 0; n--) {
+		j = i / 8;
+		k = i % 8;
+		rscs[j] |= ((u8)1 << k);
+		i--;
+	}
+
+	*ridx = i + 1;
+
+	return 0;
+}
+
+static int put_resource(u8 *rscs, unsigned int multi, unsigned int idx)
+{
+	unsigned int i, j, k, n;
+
+	/* Mark the contiguous bits in resource bit-map as used */
+	for (n = multi, i = idx; n > 0; n--) {
+		j = i / 8;
+		k = i % 8;
+		rscs[j] &= ~((u8)1 << k);
+		i++;
+	}
+
+	return 0;
+}
+
+int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx)
+{
+	int err;
+
+	if (n > mgr->avail)
+		return -ENOENT;
+
+	err = get_resource(mgr->rscs, mgr->amount, n, ridx);
+	if (!err)
+		mgr->avail -= n;
+
+	return err;
+}
+
+int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx)
+{
+	put_resource(mgr->rscs, n, idx);
+	mgr->avail += n;
+
+	return 0;
+}
+
+static unsigned char offset_in_audio_slot_block[NUM_RSCTYP] = {
+	/* SRC channel is at Audio Ring slot 1 every 16 slots. */
+	[SRC]		= 0x1,
+	[AMIXER]	= 0x4,
+	[SUM]		= 0xc,
+};
+
+static int rsc_index(const struct rsc *rsc)
+{
+    return rsc->conj;
+}
+
+static int audio_ring_slot(const struct rsc *rsc)
+{
+    return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type];
+}
+
+static int rsc_next_conj(struct rsc *rsc)
+{
+	unsigned int i;
+	for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); )
+		i++;
+	rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i);
+	return rsc->conj;
+}
+
+static int rsc_master(struct rsc *rsc)
+{
+	return rsc->conj = rsc->idx;
+}
+
+static struct rsc_ops rsc_generic_ops = {
+	.index		= rsc_index,
+	.output_slot	= audio_ring_slot,
+	.master		= rsc_master,
+	.next_conj	= rsc_next_conj,
+};
+
+int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw)
+{
+	int err = 0;
+
+	rsc->idx = idx;
+	rsc->conj = idx;
+	rsc->type = type;
+	rsc->msr = msr;
+	rsc->hw = hw;
+	rsc->ops = &rsc_generic_ops;
+	if (NULL == hw) {
+		rsc->ctrl_blk = NULL;
+		return 0;
+	}
+
+	switch (type) {
+	case SRC:
+		err = ((struct hw *)hw)->src_rsc_get_ctrl_blk(&rsc->ctrl_blk);
+		break;
+	case AMIXER:
+		err = ((struct hw *)hw)->
+				amixer_rsc_get_ctrl_blk(&rsc->ctrl_blk);
+		break;
+	case SRCIMP:
+	case SUM:
+	case DAIO:
+		break;
+	default:
+		printk(KERN_ERR
+		       "ctxfi: Invalid resource type value %d!\n", type);
+		return -EINVAL;
+	}
+
+	if (err) {
+		printk(KERN_ERR
+		       "ctxfi: Failed to get resource control block!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+int rsc_uninit(struct rsc *rsc)
+{
+	if ((NULL != rsc->hw) && (NULL != rsc->ctrl_blk)) {
+		switch (rsc->type) {
+		case SRC:
+			((struct hw *)rsc->hw)->
+				src_rsc_put_ctrl_blk(rsc->ctrl_blk);
+			break;
+		case AMIXER:
+			((struct hw *)rsc->hw)->
+				amixer_rsc_put_ctrl_blk(rsc->ctrl_blk);
+			break;
+		case SUM:
+		case DAIO:
+			break;
+		default:
+			printk(KERN_ERR "ctxfi: "
+			       "Invalid resource type value %d!\n", rsc->type);
+			break;
+		}
+
+		rsc->hw = rsc->ctrl_blk = NULL;
+	}
+
+	rsc->idx = rsc->conj = 0;
+	rsc->type = NUM_RSCTYP;
+	rsc->msr = 0;
+
+	return 0;
+}
+
+int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
+		 unsigned int amount, void *hw_obj)
+{
+	int err = 0;
+	struct hw *hw = hw_obj;
+
+	mgr->type = NUM_RSCTYP;
+
+	mgr->rscs = kzalloc(((amount + 8 - 1) / 8), GFP_KERNEL);
+	if (NULL == mgr->rscs)
+		return -ENOMEM;
+
+	switch (type) {
+	case SRC:
+		err = hw->src_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case SRCIMP:
+		err = hw->srcimp_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case AMIXER:
+		err = hw->amixer_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case DAIO:
+		err = hw->daio_mgr_get_ctrl_blk(hw, &mgr->ctrl_blk);
+		break;
+	case SUM:
+		break;
+	default:
+		printk(KERN_ERR
+		       "ctxfi: Invalid resource type value %d!\n", type);
+		err = -EINVAL;
+		goto error;
+	}
+
+	if (err) {
+		printk(KERN_ERR
+		       "ctxfi: Failed to get manager control block!\n");
+		goto error;
+	}
+
+	mgr->type = type;
+	mgr->avail = mgr->amount = amount;
+	mgr->hw = hw;
+
+	return 0;
+
+error:
+	kfree(mgr->rscs);
+	return err;
+}
+
+int rsc_mgr_uninit(struct rsc_mgr *mgr)
+{
+	if (NULL != mgr->rscs) {
+		kfree(mgr->rscs);
+		mgr->rscs = NULL;
+	}
+
+	if ((NULL != mgr->hw) && (NULL != mgr->ctrl_blk)) {
+		switch (mgr->type) {
+		case SRC:
+			((struct hw *)mgr->hw)->
+				src_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case SRCIMP:
+			((struct hw *)mgr->hw)->
+				srcimp_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case AMIXER:
+			((struct hw *)mgr->hw)->
+				amixer_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case DAIO:
+			((struct hw *)mgr->hw)->
+				daio_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case SUM:
+			break;
+		default:
+			printk(KERN_ERR "ctxfi: "
+			       "Invalid resource type value %d!\n", mgr->type);
+			break;
+		}
+
+		mgr->hw = mgr->ctrl_blk = NULL;
+	}
+
+	mgr->type = NUM_RSCTYP;
+	mgr->avail = mgr->amount = 0;
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctresource.h b/sound/pci/ctxfi/ctresource.h
new file mode 100644
index 00000000000..0838c2e84f8
--- /dev/null
+++ b/sound/pci/ctxfi/ctresource.h
@@ -0,0 +1,72 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctresource.h
+ *
+ * @Brief
+ * This file contains the definition of generic hardware resources for
+ * resource management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTRESOURCE_H
+#define CTRESOURCE_H
+
+#include <linux/types.h>
+
+enum RSCTYP {
+	SRC,
+	SRCIMP,
+	AMIXER,
+	SUM,
+	DAIO,
+	NUM_RSCTYP	/* This must be the last one and less than 16 */
+};
+
+struct rsc_ops;
+
+struct rsc {
+	u32 idx:12;	/* The index of a resource */
+	u32 type:4;	/* The type (RSCTYP) of a resource */
+	u32 conj:12;	/* Current conjugate index */
+	u32 msr:4;	/* The Master Sample Rate a resource working on */
+	void *ctrl_blk;	/* Chip specific control info block for a resource */
+	void *hw;	/* Chip specific object for hardware access means */
+	struct rsc_ops *ops;	/* Generic resource operations */
+};
+
+struct rsc_ops {
+	int (*master)(struct rsc *rsc);	/* Move to master resource */
+	int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
+	int (*index)(const struct rsc *rsc); /* Return the index of resource */
+	/* Return the output slot number */
+	int (*output_slot)(const struct rsc *rsc);
+};
+
+int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw);
+int rsc_uninit(struct rsc *rsc);
+
+struct rsc_mgr {
+	enum RSCTYP type; /* The type (RSCTYP) of resource to manage */
+	unsigned int amount; /* The total amount of a kind of resource */
+	unsigned int avail; /* The amount of currently available resources */
+	unsigned char *rscs; /* The bit-map for resource allocation */
+	void *ctrl_blk; /* Chip specific control info block */
+	void *hw; /* Chip specific object for hardware access */
+};
+
+/* Resource management is based on bit-map mechanism */
+int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
+		 unsigned int amount, void *hw);
+int rsc_mgr_uninit(struct rsc_mgr *mgr);
+int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx);
+int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx);
+
+#endif /* CTRESOURCE_H */
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
new file mode 100644
index 00000000000..e1c145d8b70
--- /dev/null
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -0,0 +1,886 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctsrc.c
+ *
+ * @Brief
+ * This file contains the implementation of the Sample Rate Convertor
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#include "ctsrc.h"
+#include "cthardware.h"
+#include <linux/slab.h>
+
+#define SRC_RESOURCE_NUM	64
+#define SRCIMP_RESOURCE_NUM	256
+
+static unsigned int conj_mask;
+
+static int src_default_config_memrd(struct src *src);
+static int src_default_config_memwr(struct src *src);
+static int src_default_config_arcrw(struct src *src);
+
+static int (*src_default_config[3])(struct src *) = {
+	[MEMRD] = src_default_config_memrd,
+	[MEMWR] = src_default_config_memwr,
+	[ARCRW] = src_default_config_arcrw
+};
+
+static int src_set_state(struct src *src, unsigned int state)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_state(src->rsc.ctrl_blk, state);
+
+	return 0;
+}
+
+static int src_set_bm(struct src *src, unsigned int bm)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_bm(src->rsc.ctrl_blk, bm);
+
+	return 0;
+}
+
+static int src_set_sf(struct src *src, unsigned int sf)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_sf(src->rsc.ctrl_blk, sf);
+
+	return 0;
+}
+
+static int src_set_pm(struct src *src, unsigned int pm)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_pm(src->rsc.ctrl_blk, pm);
+
+	return 0;
+}
+
+static int src_set_rom(struct src *src, unsigned int rom)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_rom(src->rsc.ctrl_blk, rom);
+
+	return 0;
+}
+
+static int src_set_vo(struct src *src, unsigned int vo)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_vo(src->rsc.ctrl_blk, vo);
+
+	return 0;
+}
+
+static int src_set_st(struct src *src, unsigned int st)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_st(src->rsc.ctrl_blk, st);
+
+	return 0;
+}
+
+static int src_set_bp(struct src *src, unsigned int bp)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_bp(src->rsc.ctrl_blk, bp);
+
+	return 0;
+}
+
+static int src_set_cisz(struct src *src, unsigned int cisz)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_cisz(src->rsc.ctrl_blk, cisz);
+
+	return 0;
+}
+
+static int src_set_ca(struct src *src, unsigned int ca)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_ca(src->rsc.ctrl_blk, ca);
+
+	return 0;
+}
+
+static int src_set_sa(struct src *src, unsigned int sa)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_sa(src->rsc.ctrl_blk, sa);
+
+	return 0;
+}
+
+static int src_set_la(struct src *src, unsigned int la)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_la(src->rsc.ctrl_blk, la);
+
+	return 0;
+}
+
+static int src_set_pitch(struct src *src, unsigned int pitch)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_pitch(src->rsc.ctrl_blk, pitch);
+
+	return 0;
+}
+
+static int src_set_clear_zbufs(struct src *src)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	return 0;
+}
+
+static int src_commit_write(struct src *src)
+{
+	struct hw *hw;
+	int i;
+	unsigned int dirty = 0;
+
+	hw = src->rsc.hw;
+	src->rsc.ops->master(&src->rsc);
+	if (src->rsc.msr > 1) {
+		/* Save dirty flags for conjugate resource programming */
+		dirty = hw->src_get_dirty(src->rsc.ctrl_blk) & conj_mask;
+	}
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	/* Program conjugate parameter mixer resources */
+	if (MEMWR == src->mode)
+		return 0;
+
+	for (i = 1; i < src->rsc.msr; i++) {
+		src->rsc.ops->next_conj(&src->rsc);
+		hw->src_set_dirty(src->rsc.ctrl_blk, dirty);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_get_ca(struct src *src)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	return hw->src_get_ca(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+}
+
+static int src_init(struct src *src)
+{
+	src_default_config[src->mode](src);
+
+	return 0;
+}
+
+static struct src *src_next_interleave(struct src *src)
+{
+	return src->intlv;
+}
+
+static int src_default_config_memrd(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+	unsigned int rsr, msr;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 1);
+	for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->src_set_rsr(src->rsc.ctrl_blk, rsr);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16);
+	hw->src_set_wr(src->rsc.ctrl_blk, 0);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, src->multi - 1);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	src->rsc.ops->master(&src->rsc);
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	for (msr = 1; msr < src->rsc.msr; msr++) {
+		src->rsc.ops->next_conj(&src->rsc);
+		hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_default_config_memwr(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 1);
+	hw->src_set_rsr(src->rsc.ctrl_blk, 0);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16);
+	hw->src_set_wr(src->rsc.ctrl_blk, 1);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, 0);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	src->rsc.ops->master(&src->rsc);
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	return 0;
+}
+
+static int src_default_config_arcrw(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+	unsigned int rsr, msr;
+	unsigned int dirty;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 0);
+	for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->src_set_rsr(src->rsc.ctrl_blk, rsr);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_F32);
+	hw->src_set_wr(src->rsc.ctrl_blk, 0);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, 0);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	/*hw->src_set_sa(src->rsc.ctrl_blk, 0x100);*/
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	/*hw->src_set_la(src->rsc.ctrl_blk, 0x03ffffe0);*/
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	dirty = hw->src_get_dirty(src->rsc.ctrl_blk);
+	src->rsc.ops->master(&src->rsc);
+	for (msr = 0; msr < src->rsc.msr; msr++) {
+		hw->src_set_dirty(src->rsc.ctrl_blk, dirty);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static struct src_rsc_ops src_rsc_ops = {
+	.set_state		= src_set_state,
+	.set_bm			= src_set_bm,
+	.set_sf			= src_set_sf,
+	.set_pm			= src_set_pm,
+	.set_rom		= src_set_rom,
+	.set_vo			= src_set_vo,
+	.set_st			= src_set_st,
+	.set_bp			= src_set_bp,
+	.set_cisz		= src_set_cisz,
+	.set_ca			= src_set_ca,
+	.set_sa			= src_set_sa,
+	.set_la			= src_set_la,
+	.set_pitch		= src_set_pitch,
+	.set_clr_zbufs		= src_set_clear_zbufs,
+	.commit_write		= src_commit_write,
+	.get_ca			= src_get_ca,
+	.init			= src_init,
+	.next_interleave	= src_next_interleave,
+};
+
+static int
+src_rsc_init(struct src *src, u32 idx,
+	     const struct src_desc *desc, struct src_mgr *mgr)
+{
+	int err;
+	int i, n;
+	struct src *p;
+
+	n = (MEMRD == desc->mode) ? desc->multi : 1;
+	for (i = 0, p = src; i < n; i++, p++) {
+		err = rsc_init(&p->rsc, idx + i, SRC, desc->msr, mgr->mgr.hw);
+		if (err)
+			goto error1;
+
+		/* Initialize src specific rsc operations */
+		p->ops = &src_rsc_ops;
+		p->multi = (0 == i) ? desc->multi : 1;
+		p->mode = desc->mode;
+		src_default_config[desc->mode](p);
+		mgr->src_enable(mgr, p);
+		p->intlv = p + 1;
+	}
+	(--p)->intlv = NULL;	/* Set @intlv of the last SRC to NULL */
+
+	mgr->commit_write(mgr);
+
+	return 0;
+
+error1:
+	for (i--, p--; i >= 0; i--, p--) {
+		mgr->src_disable(mgr, p);
+		rsc_uninit(&p->rsc);
+	}
+	mgr->commit_write(mgr);
+	return err;
+}
+
+static int src_rsc_uninit(struct src *src, struct src_mgr *mgr)
+{
+	int i, n;
+	struct src *p;
+
+	n = (MEMRD == src->mode) ? src->multi : 1;
+	for (i = 0, p = src; i < n; i++, p++) {
+		mgr->src_disable(mgr, p);
+		rsc_uninit(&p->rsc);
+		p->multi = 0;
+		p->ops = NULL;
+		p->mode = NUM_SRCMODES;
+		p->intlv = NULL;
+	}
+	mgr->commit_write(mgr);
+
+	return 0;
+}
+
+static int
+get_src_rsc(struct src_mgr *mgr, const struct src_desc *desc, struct src **rsrc)
+{
+	unsigned int idx = SRC_RESOURCE_NUM;
+	int err;
+	struct src *src;
+	unsigned long flags;
+
+	*rsrc = NULL;
+
+	/* Check whether there are sufficient src resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	if (MEMRD == desc->mode)
+		err = mgr_get_resource(&mgr->mgr, desc->multi, &idx);
+	else
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SRC resource request!\n");
+		return err;
+	}
+
+	/* Allocate mem for master src resource */
+	if (MEMRD == desc->mode)
+		src = kzalloc(sizeof(*src)*desc->multi, GFP_KERNEL);
+	else
+		src = kzalloc(sizeof(*src), GFP_KERNEL);
+
+	if (NULL == src) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	err = src_rsc_init(src, idx, desc, mgr);
+	if (err)
+		goto error2;
+
+	*rsrc = src;
+
+	return 0;
+
+error2:
+	kfree(src);
+error1:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	if (MEMRD == desc->mode)
+		mgr_put_resource(&mgr->mgr, desc->multi, idx);
+	else
+		mgr_put_resource(&mgr->mgr, 1, idx);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	return err;
+}
+
+static int put_src_rsc(struct src_mgr *mgr, struct src *src)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	src->rsc.ops->master(&src->rsc);
+	if (MEMRD == src->mode)
+		mgr_put_resource(&mgr->mgr, src->multi,
+				 src->rsc.ops->index(&src->rsc));
+	else
+		mgr_put_resource(&mgr->mgr, 1, src->rsc.ops->index(&src->rsc));
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	src_rsc_uninit(src, mgr);
+	kfree(src);
+
+	return 0;
+}
+
+static int src_enable_s(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_enbs_src(mgr->mgr.ctrl_blk,
+				     src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_enable(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_enb_src(mgr->mgr.ctrl_blk,
+				    src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_disable(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_dsb_src(mgr->mgr.ctrl_blk,
+				    src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_mgr_commit_write(struct src_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	hw->src_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	return 0;
+}
+
+int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr)
+{
+	int err, i;
+	struct src_mgr *src_mgr;
+
+	*rsrc_mgr = NULL;
+	src_mgr = kzalloc(sizeof(*src_mgr), GFP_KERNEL);
+	if (NULL == src_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&src_mgr->mgr, SRC, SRC_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&src_mgr->mgr_lock);
+	conj_mask = ((struct hw *)hw)->src_dirty_conj_mask();
+
+	src_mgr->get_src = get_src_rsc;
+	src_mgr->put_src = put_src_rsc;
+	src_mgr->src_enable_s = src_enable_s;
+	src_mgr->src_enable = src_enable;
+	src_mgr->src_disable = src_disable;
+	src_mgr->commit_write = src_mgr_commit_write;
+
+	/* Disable all SRC resources. */
+	for (i = 0; i < 256; i++)
+		((struct hw *)hw)->src_mgr_dsb_src(src_mgr->mgr.ctrl_blk, i);
+
+	((struct hw *)hw)->src_mgr_commit_write(hw, src_mgr->mgr.ctrl_blk);
+
+	*rsrc_mgr = src_mgr;
+
+	return 0;
+
+error1:
+	kfree(src_mgr);
+	return err;
+}
+
+int src_mgr_destroy(struct src_mgr *src_mgr)
+{
+	rsc_mgr_uninit(&src_mgr->mgr);
+	kfree(src_mgr);
+
+	return 0;
+}
+
+/* SRCIMP resource manager operations */
+
+static int srcimp_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
+}
+
+static int srcimp_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
+}
+
+static int srcimp_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
+}
+
+static struct rsc_ops srcimp_basic_rsc_ops = {
+	.master		= srcimp_master,
+	.next_conj	= srcimp_next_conj,
+	.index		= srcimp_index,
+	.output_slot	= NULL,
+};
+
+static int srcimp_map(struct srcimp *srcimp, struct src *src, struct rsc *input)
+{
+	struct imapper *entry;
+	int i;
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+	src->rsc.ops->master(&src->rsc);
+	input->ops->master(input);
+
+	/* Program master and conjugate resources */
+	for (i = 0; i < srcimp->rsc.msr; i++) {
+		entry = &srcimp->imappers[i];
+		entry->slot = input->ops->output_slot(input);
+		entry->user = src->rsc.ops->index(&src->rsc);
+		entry->addr = srcimp->rsc.ops->index(&srcimp->rsc);
+		srcimp->mgr->imap_add(srcimp->mgr, entry);
+		srcimp->mapped |= (0x1 << i);
+
+		srcimp->rsc.ops->next_conj(&srcimp->rsc);
+		input->ops->next_conj(input);
+	}
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+	input->ops->master(input);
+
+	return 0;
+}
+
+static int srcimp_unmap(struct srcimp *srcimp)
+{
+	int i;
+
+	/* Program master and conjugate resources */
+	for (i = 0; i < srcimp->rsc.msr; i++) {
+		if (srcimp->mapped & (0x1 << i)) {
+			srcimp->mgr->imap_delete(srcimp->mgr,
+						 &srcimp->imappers[i]);
+			srcimp->mapped &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static struct srcimp_rsc_ops srcimp_ops = {
+	.map = srcimp_map,
+	.unmap = srcimp_unmap
+};
+
+static int srcimp_rsc_init(struct srcimp *srcimp,
+			   const struct srcimp_desc *desc,
+			   struct srcimp_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&srcimp->rsc, srcimp->idx[0],
+		       SRCIMP, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	/* Reserve memory for imapper nodes */
+	srcimp->imappers = kzalloc(sizeof(struct imapper)*desc->msr,
+				   GFP_KERNEL);
+	if (NULL == srcimp->imappers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	/* Set srcimp specific operations */
+	srcimp->rsc.ops = &srcimp_basic_rsc_ops;
+	srcimp->ops = &srcimp_ops;
+	srcimp->mgr = mgr;
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+
+	return 0;
+
+error1:
+	rsc_uninit(&srcimp->rsc);
+	return err;
+}
+
+static int srcimp_rsc_uninit(struct srcimp *srcimp)
+{
+	if (NULL != srcimp->imappers) {
+		kfree(srcimp->imappers);
+		srcimp->imappers = NULL;
+	}
+	srcimp->ops = NULL;
+	srcimp->mgr = NULL;
+	rsc_uninit(&srcimp->rsc);
+
+	return 0;
+}
+
+static int get_srcimp_rsc(struct srcimp_mgr *mgr,
+			  const struct srcimp_desc *desc,
+			  struct srcimp **rsrcimp)
+{
+	int err, i;
+	unsigned int idx;
+	struct srcimp *srcimp;
+	unsigned long flags;
+
+	*rsrcimp = NULL;
+
+	/* Allocate mem for SRCIMP resource */
+	srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
+	if (NULL == srcimp) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient SRCIMP resources. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		srcimp->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SRCIMP resource request!\n");
+		goto error1;
+	}
+
+	err = srcimp_rsc_init(srcimp, desc, mgr);
+	if (err)
+		goto error1;
+
+	*rsrcimp = srcimp;
+
+	return 0;
+
+error1:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(srcimp);
+	return err;
+}
+
+static int put_srcimp_rsc(struct srcimp_mgr *mgr, struct srcimp *srcimp)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < srcimp->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	srcimp_rsc_uninit(srcimp);
+	kfree(srcimp);
+
+	return 0;
+}
+
+static int srcimp_map_op(void *data, struct imapper *entry)
+{
+	struct rsc_mgr *mgr = &((struct srcimp_mgr *)data)->mgr;
+	struct hw *hw = mgr->hw;
+
+	hw->srcimp_mgr_set_imaparc(mgr->ctrl_blk, entry->slot);
+	hw->srcimp_mgr_set_imapuser(mgr->ctrl_blk, entry->user);
+	hw->srcimp_mgr_set_imapnxt(mgr->ctrl_blk, entry->next);
+	hw->srcimp_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr);
+	hw->srcimp_mgr_commit_write(mgr->hw, mgr->ctrl_blk);
+
+	return 0;
+}
+
+static int srcimp_imap_add(struct srcimp_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	if ((0 == entry->addr) && (mgr->init_imap_added)) {
+		input_mapper_delete(&mgr->imappers,
+				    mgr->init_imap, srcimp_map_op, mgr);
+		mgr->init_imap_added = 0;
+	}
+	err = input_mapper_add(&mgr->imappers, entry, srcimp_map_op, mgr);
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int srcimp_imap_delete(struct srcimp_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	err = input_mapper_delete(&mgr->imappers, entry, srcimp_map_op, mgr);
+	if (list_empty(&mgr->imappers)) {
+		input_mapper_add(&mgr->imappers, mgr->init_imap,
+				 srcimp_map_op, mgr);
+		mgr->init_imap_added = 1;
+	}
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrcimp_mgr)
+{
+	int err;
+	struct srcimp_mgr *srcimp_mgr;
+	struct imapper *entry;
+
+	*rsrcimp_mgr = NULL;
+	srcimp_mgr = kzalloc(sizeof(*srcimp_mgr), GFP_KERNEL);
+	if (NULL == srcimp_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&srcimp_mgr->mgr, SRCIMP, SRCIMP_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&srcimp_mgr->mgr_lock);
+	spin_lock_init(&srcimp_mgr->imap_lock);
+	INIT_LIST_HEAD(&srcimp_mgr->imappers);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (NULL == entry) {
+		err = -ENOMEM;
+		goto error2;
+	}
+	entry->slot = entry->addr = entry->next = entry->user = 0;
+	list_add(&entry->list, &srcimp_mgr->imappers);
+	srcimp_mgr->init_imap = entry;
+	srcimp_mgr->init_imap_added = 1;
+
+	srcimp_mgr->get_srcimp = get_srcimp_rsc;
+	srcimp_mgr->put_srcimp = put_srcimp_rsc;
+	srcimp_mgr->imap_add = srcimp_imap_add;
+	srcimp_mgr->imap_delete = srcimp_imap_delete;
+
+	*rsrcimp_mgr = srcimp_mgr;
+
+	return 0;
+
+error2:
+	rsc_mgr_uninit(&srcimp_mgr->mgr);
+error1:
+	kfree(srcimp_mgr);
+	return err;
+}
+
+int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr)
+{
+	unsigned long flags;
+
+	/* free src input mapper list */
+	spin_lock_irqsave(&srcimp_mgr->imap_lock, flags);
+	free_input_mapper_list(&srcimp_mgr->imappers);
+	spin_unlock_irqrestore(&srcimp_mgr->imap_lock, flags);
+
+	rsc_mgr_uninit(&srcimp_mgr->mgr);
+	kfree(srcimp_mgr);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctsrc.h b/sound/pci/ctxfi/ctsrc.h
new file mode 100644
index 00000000000..259366aabca
--- /dev/null
+++ b/sound/pci/ctxfi/ctsrc.h
@@ -0,0 +1,149 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctsrc.h
+ *
+ * @Brief
+ * This file contains the definition of the Sample Rate Convertor
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTSRC_H
+#define CTSRC_H
+
+#include "ctresource.h"
+#include "ctimap.h"
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#define SRC_STATE_OFF	0x0
+#define SRC_STATE_INIT	0x4
+#define SRC_STATE_RUN	0x5
+
+#define SRC_SF_U8	0x0
+#define SRC_SF_S16	0x1
+#define SRC_SF_S24	0x2
+#define SRC_SF_S32	0x3
+#define SRC_SF_F32	0x4
+
+/* Define the descriptor of a src resource */
+enum SRCMODE {
+	MEMRD,		/* Read data from host memory */
+	MEMWR,		/* Write data to host memory */
+	ARCRW,		/* Read from and write to audio ring channel */
+	NUM_SRCMODES
+};
+
+struct src_rsc_ops;
+
+struct src {
+	struct rsc rsc; /* Basic resource info */
+	struct src *intlv; /* Pointer to next interleaved SRC in a series */
+	struct src_rsc_ops *ops; /* SRC specific operations */
+	/* Number of contiguous srcs for interleaved usage */
+	unsigned char multi;
+	unsigned char mode; /* Working mode of this SRC resource */
+};
+
+struct src_rsc_ops {
+	int (*set_state)(struct src *src, unsigned int state);
+	int (*set_bm)(struct src *src, unsigned int bm);
+	int (*set_sf)(struct src *src, unsigned int sf);
+	int (*set_pm)(struct src *src, unsigned int pm);
+	int (*set_rom)(struct src *src, unsigned int rom);
+	int (*set_vo)(struct src *src, unsigned int vo);
+	int (*set_st)(struct src *src, unsigned int st);
+	int (*set_bp)(struct src *src, unsigned int bp);
+	int (*set_cisz)(struct src *src, unsigned int cisz);
+	int (*set_ca)(struct src *src, unsigned int ca);
+	int (*set_sa)(struct src *src, unsigned int sa);
+	int (*set_la)(struct src *src, unsigned int la);
+	int (*set_pitch)(struct src *src, unsigned int pitch);
+	int (*set_clr_zbufs)(struct src *src);
+	int (*commit_write)(struct src *src);
+	int (*get_ca)(struct src *src);
+	int (*init)(struct src *src);
+	struct src* (*next_interleave)(struct src *src);
+};
+
+/* Define src resource request description info */
+struct src_desc {
+	/* Number of contiguous master srcs for interleaved usage */
+	unsigned char multi;
+	unsigned char msr;
+	unsigned char mode; /* Working mode of the requested srcs */
+};
+
+/* Define src manager object */
+struct src_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request src resource */
+	int (*get_src)(struct src_mgr *mgr,
+		       const struct src_desc *desc, struct src **rsrc);
+	/* return src resource */
+	int (*put_src)(struct src_mgr *mgr, struct src *src);
+	int (*src_enable_s)(struct src_mgr *mgr, struct src *src);
+	int (*src_enable)(struct src_mgr *mgr, struct src *src);
+	int (*src_disable)(struct src_mgr *mgr, struct src *src);
+	int (*commit_write)(struct src_mgr *mgr);
+};
+
+/* Define the descriptor of a SRC Input Mapper resource */
+struct srcimp_mgr;
+struct srcimp_rsc_ops;
+
+struct srcimp {
+	struct rsc rsc;
+	unsigned char idx[8];
+	struct imapper *imappers;
+	unsigned int mapped; /* A bit-map indicating which conj rsc is mapped */
+	struct srcimp_mgr *mgr;
+	struct srcimp_rsc_ops *ops;
+};
+
+struct srcimp_rsc_ops {
+	int (*map)(struct srcimp *srcimp, struct src *user, struct rsc *input);
+	int (*unmap)(struct srcimp *srcimp);
+};
+
+/* Define SRCIMP resource request description info */
+struct srcimp_desc {
+	unsigned int msr;
+};
+
+struct srcimp_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+	spinlock_t imap_lock;
+	struct list_head imappers;
+	struct imapper *init_imap;
+	unsigned int init_imap_added;
+
+	 /* request srcimp resource */
+	int (*get_srcimp)(struct srcimp_mgr *mgr,
+			  const struct srcimp_desc *desc,
+			  struct srcimp **rsrcimp);
+	/* return srcimp resource */
+	int (*put_srcimp)(struct srcimp_mgr *mgr, struct srcimp *srcimp);
+	int (*imap_add)(struct srcimp_mgr *mgr, struct imapper *entry);
+	int (*imap_delete)(struct srcimp_mgr *mgr, struct imapper *entry);
+};
+
+/* Constructor and destructor of SRC resource manager */
+int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr);
+int src_mgr_destroy(struct src_mgr *src_mgr);
+/* Constructor and destructor of SRCIMP resource manager */
+int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrc_mgr);
+int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr);
+
+#endif /* CTSRC_H */
diff --git a/sound/pci/ctxfi/cttimer.c b/sound/pci/ctxfi/cttimer.c
new file mode 100644
index 00000000000..93b0aedc36d
--- /dev/null
+++ b/sound/pci/ctxfi/cttimer.c
@@ -0,0 +1,443 @@
+/*
+ * PCM timer handling on ctxfi
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#include <linux/slab.h>
+#include <linux/math64.h>
+#include <linux/moduleparam.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include "ctatc.h"
+#include "cthardware.h"
+#include "cttimer.h"
+
+static int use_system_timer;
+MODULE_PARM_DESC(use_system_timer, "Foce to use system-timer");
+module_param(use_system_timer, bool, S_IRUGO);
+
+struct ct_timer_ops {
+	void (*init)(struct ct_timer_instance *);
+	void (*prepare)(struct ct_timer_instance *);
+	void (*start)(struct ct_timer_instance *);
+	void (*stop)(struct ct_timer_instance *);
+	void (*free_instance)(struct ct_timer_instance *);
+	void (*interrupt)(struct ct_timer *);
+	void (*free_global)(struct ct_timer *);
+};
+
+/* timer instance -- assigned to each PCM stream */
+struct ct_timer_instance {
+	spinlock_t lock;
+	struct ct_timer *timer_base;
+	struct ct_atc_pcm *apcm;
+	struct snd_pcm_substream *substream;
+	struct timer_list timer;
+	struct list_head instance_list;
+	struct list_head running_list;
+	unsigned int position;
+	unsigned int frag_count;
+	unsigned int running:1;
+	unsigned int need_update:1;
+};
+
+/* timer instance manager */
+struct ct_timer {
+	spinlock_t lock;		/* global timer lock (for xfitimer) */
+	spinlock_t list_lock;		/* lock for instance list */
+	struct ct_atc *atc;
+	struct ct_timer_ops *ops;
+	struct list_head instance_head;
+	struct list_head running_head;
+	unsigned int wc;		/* current wallclock */
+	unsigned int irq_handling:1;	/* in IRQ handling */
+	unsigned int reprogram:1;	/* need to reprogram the internval */
+	unsigned int running:1;		/* global timer running */
+};
+
+
+/*
+ * system-timer-based updates
+ */
+
+static void ct_systimer_callback(unsigned long data)
+{
+	struct ct_timer_instance *ti = (struct ct_timer_instance *)data;
+	struct snd_pcm_substream *substream = ti->substream;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = ti->apcm;
+	unsigned int period_size = runtime->period_size;
+	unsigned int buffer_size = runtime->buffer_size;
+	unsigned long flags;
+	unsigned int position, dist, interval;
+
+	position = substream->ops->pointer(substream);
+	dist = (position + buffer_size - ti->position) % buffer_size;
+	if (dist >= period_size ||
+	    position / period_size != ti->position / period_size) {
+		apcm->interrupt(apcm);
+		ti->position = position;
+	}
+	/* Add extra HZ*5/1000 to avoid overrun issue when recording
+	 * at 8kHz in 8-bit format or at 88kHz in 24-bit format. */
+	interval = ((period_size - (position % period_size))
+		   * HZ + (runtime->rate - 1)) / runtime->rate + HZ * 5 / 1000;
+	spin_lock_irqsave(&ti->lock, flags);
+	if (ti->running)
+		mod_timer(&ti->timer, jiffies + interval);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_init(struct ct_timer_instance *ti)
+{
+	setup_timer(&ti->timer, ct_systimer_callback,
+		    (unsigned long)ti);
+}
+
+static void ct_systimer_start(struct ct_timer_instance *ti)
+{
+	struct snd_pcm_runtime *runtime = ti->substream->runtime;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ti->lock, flags);
+	ti->running = 1;
+	mod_timer(&ti->timer,
+		  jiffies + (runtime->period_size * HZ +
+			     (runtime->rate - 1)) / runtime->rate);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_stop(struct ct_timer_instance *ti)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ti->lock, flags);
+	ti->running = 0;
+	del_timer(&ti->timer);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_prepare(struct ct_timer_instance *ti)
+{
+	ct_systimer_stop(ti);
+	try_to_del_timer_sync(&ti->timer);
+}
+
+#define ct_systimer_free	ct_systimer_prepare
+
+static struct ct_timer_ops ct_systimer_ops = {
+	.init = ct_systimer_init,
+	.free_instance = ct_systimer_free,
+	.prepare = ct_systimer_prepare,
+	.start = ct_systimer_start,
+	.stop = ct_systimer_stop,
+};
+
+
+/*
+ * Handling multiple streams using a global emu20k1 timer irq
+ */
+
+#define CT_TIMER_FREQ	48000
+#define MIN_TICKS	1
+#define MAX_TICKS	((1 << 13) - 1)
+
+static void ct_xfitimer_irq_rearm(struct ct_timer *atimer, int ticks)
+{
+	struct hw *hw = atimer->atc->hw;
+	if (ticks > MAX_TICKS)
+		ticks = MAX_TICKS;
+	hw->set_timer_tick(hw, ticks);
+	if (!atimer->running)
+		hw->set_timer_irq(hw, 1);
+	atimer->running = 1;
+}
+
+static void ct_xfitimer_irq_stop(struct ct_timer *atimer)
+{
+	if (atimer->running) {
+		struct hw *hw = atimer->atc->hw;
+		hw->set_timer_irq(hw, 0);
+		hw->set_timer_tick(hw, 0);
+		atimer->running = 0;
+	}
+}
+
+static inline unsigned int ct_xfitimer_get_wc(struct ct_timer *atimer)
+{
+	struct hw *hw = atimer->atc->hw;
+	return hw->get_wc(hw);
+}
+
+/*
+ * reprogram the timer interval;
+ * checks the running instance list and determines the next timer interval.
+ * also updates the each stream position, returns the number of streams
+ * to call snd_pcm_period_elapsed() appropriately
+ *
+ * call this inside the lock and irq disabled
+ */
+static int ct_xfitimer_reprogram(struct ct_timer *atimer, int can_update)
+{
+	struct ct_timer_instance *ti;
+	unsigned int min_intr = (unsigned int)-1;
+	int updates = 0;
+	unsigned int wc, diff;
+
+	if (list_empty(&atimer->running_head)) {
+		ct_xfitimer_irq_stop(atimer);
+		atimer->reprogram = 0; /* clear flag */
+		return 0;
+	}
+
+	wc = ct_xfitimer_get_wc(atimer);
+	diff = wc - atimer->wc;
+	atimer->wc = wc;
+	list_for_each_entry(ti, &atimer->running_head, running_list) {
+		if (ti->frag_count > diff)
+			ti->frag_count -= diff;
+		else {
+			unsigned int pos;
+			unsigned int period_size, rate;
+
+			period_size = ti->substream->runtime->period_size;
+			rate = ti->substream->runtime->rate;
+			pos = ti->substream->ops->pointer(ti->substream);
+			if (pos / period_size != ti->position / period_size) {
+				ti->need_update = 1;
+				ti->position = pos;
+				updates++;
+			}
+			pos %= period_size;
+			pos = period_size - pos;
+			ti->frag_count = div_u64((u64)pos * CT_TIMER_FREQ +
+						 rate - 1, rate);
+		}
+		if (ti->need_update && !can_update)
+			min_intr = 0; /* pending to the next irq */
+		if (ti->frag_count < min_intr)
+			min_intr = ti->frag_count;
+	}
+
+	if (min_intr < MIN_TICKS)
+		min_intr = MIN_TICKS;
+	ct_xfitimer_irq_rearm(atimer, min_intr);
+	atimer->reprogram = 0; /* clear flag */
+	return updates;
+}
+
+/* look through the instance list and call period_elapsed if needed */
+static void ct_xfitimer_check_period(struct ct_timer *atimer)
+{
+	struct ct_timer_instance *ti;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->list_lock, flags);
+	list_for_each_entry(ti, &atimer->instance_head, instance_list) {
+		if (ti->running && ti->need_update) {
+			ti->need_update = 0;
+			ti->apcm->interrupt(ti->apcm);
+		}
+	}
+	spin_unlock_irqrestore(&atimer->list_lock, flags);
+}
+
+/* Handle timer-interrupt */
+static void ct_xfitimer_callback(struct ct_timer *atimer)
+{
+	int update;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	atimer->irq_handling = 1;
+	do {
+		update = ct_xfitimer_reprogram(atimer, 1);
+		spin_unlock(&atimer->lock);
+		if (update)
+			ct_xfitimer_check_period(atimer);
+		spin_lock(&atimer->lock);
+	} while (atimer->reprogram);
+	atimer->irq_handling = 0;
+	spin_unlock_irqrestore(&atimer->lock, flags);
+}
+
+static void ct_xfitimer_prepare(struct ct_timer_instance *ti)
+{
+	ti->frag_count = ti->substream->runtime->period_size;
+	ti->running = 0;
+	ti->need_update = 0;
+}
+
+
+/* start/stop the timer */
+static void ct_xfitimer_update(struct ct_timer *atimer)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	if (atimer->irq_handling) {
+		/* reached from IRQ handler; let it handle later */
+		atimer->reprogram = 1;
+		spin_unlock_irqrestore(&atimer->lock, flags);
+		return;
+	}
+
+	ct_xfitimer_irq_stop(atimer);
+	ct_xfitimer_reprogram(atimer, 0);
+	spin_unlock_irqrestore(&atimer->lock, flags);
+}
+
+static void ct_xfitimer_start(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	if (list_empty(&ti->running_list))
+		atimer->wc = ct_xfitimer_get_wc(atimer);
+	ti->running = 1;
+	ti->need_update = 0;
+	list_add(&ti->running_list, &atimer->running_head);
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	ct_xfitimer_update(atimer);
+}
+
+static void ct_xfitimer_stop(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	list_del_init(&ti->running_list);
+	ti->running = 0;
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	ct_xfitimer_update(atimer);
+}
+
+static void ct_xfitimer_free_global(struct ct_timer *atimer)
+{
+	ct_xfitimer_irq_stop(atimer);
+}
+
+static struct ct_timer_ops ct_xfitimer_ops = {
+	.prepare = ct_xfitimer_prepare,
+	.start = ct_xfitimer_start,
+	.stop = ct_xfitimer_stop,
+	.interrupt = ct_xfitimer_callback,
+	.free_global = ct_xfitimer_free_global,
+};
+
+/*
+ * timer instance
+ */
+
+struct ct_timer_instance *
+ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm)
+{
+	struct ct_timer_instance *ti;
+
+	ti = kzalloc(sizeof(*ti), GFP_KERNEL);
+	if (!ti)
+		return NULL;
+	spin_lock_init(&ti->lock);
+	INIT_LIST_HEAD(&ti->instance_list);
+	INIT_LIST_HEAD(&ti->running_list);
+	ti->timer_base = atimer;
+	ti->apcm = apcm;
+	ti->substream = apcm->substream;
+	if (atimer->ops->init)
+		atimer->ops->init(ti);
+
+	spin_lock_irq(&atimer->list_lock);
+	list_add(&ti->instance_list, &atimer->instance_head);
+	spin_unlock_irq(&atimer->list_lock);
+
+	return ti;
+}
+
+void ct_timer_prepare(struct ct_timer_instance *ti)
+{
+	if (ti->timer_base->ops->prepare)
+		ti->timer_base->ops->prepare(ti);
+	ti->position = 0;
+	ti->running = 0;
+}
+
+void ct_timer_start(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	atimer->ops->start(ti);
+}
+
+void ct_timer_stop(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	atimer->ops->stop(ti);
+}
+
+void ct_timer_instance_free(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+
+	atimer->ops->stop(ti); /* to be sure */
+	if (atimer->ops->free_instance)
+		atimer->ops->free_instance(ti);
+
+	spin_lock_irq(&atimer->list_lock);
+	list_del(&ti->instance_list);
+	spin_unlock_irq(&atimer->list_lock);
+
+	kfree(ti);
+}
+
+/*
+ * timer manager
+ */
+
+static void ct_timer_interrupt(void *data, unsigned int status)
+{
+	struct ct_timer *timer = data;
+
+	/* Interval timer interrupt */
+	if ((status & IT_INT) && timer->ops->interrupt)
+		timer->ops->interrupt(timer);
+}
+
+struct ct_timer *ct_timer_new(struct ct_atc *atc)
+{
+	struct ct_timer *atimer;
+	struct hw *hw;
+
+	atimer = kzalloc(sizeof(*atimer), GFP_KERNEL);
+	if (!atimer)
+		return NULL;
+	spin_lock_init(&atimer->lock);
+	spin_lock_init(&atimer->list_lock);
+	INIT_LIST_HEAD(&atimer->instance_head);
+	INIT_LIST_HEAD(&atimer->running_head);
+	atimer->atc = atc;
+	hw = atc->hw;
+	if (!use_system_timer && hw->set_timer_irq) {
+		snd_printd(KERN_INFO "ctxfi: Use xfi-native timer\n");
+		atimer->ops = &ct_xfitimer_ops;
+		hw->irq_callback_data = atimer;
+		hw->irq_callback = ct_timer_interrupt;
+	} else {
+		snd_printd(KERN_INFO "ctxfi: Use system timer\n");
+		atimer->ops = &ct_systimer_ops;
+	}
+	return atimer;
+}
+
+void ct_timer_free(struct ct_timer *atimer)
+{
+	struct hw *hw = atimer->atc->hw;
+	hw->irq_callback = NULL;
+	if (atimer->ops->free_global)
+		atimer->ops->free_global(atimer);
+	kfree(atimer);
+}
+
diff --git a/sound/pci/ctxfi/cttimer.h b/sound/pci/ctxfi/cttimer.h
new file mode 100644
index 00000000000..97934822929
--- /dev/null
+++ b/sound/pci/ctxfi/cttimer.h
@@ -0,0 +1,29 @@
+/*
+ * Timer handling
+ */
+
+#ifndef __CTTIMER_H
+#define __CTTIMER_H
+
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+
+struct snd_pcm_substream;
+struct ct_atc;
+struct ct_atc_pcm;
+
+struct ct_timer;
+struct ct_timer_instance;
+
+struct ct_timer *ct_timer_new(struct ct_atc *atc);
+void ct_timer_free(struct ct_timer *atimer);
+
+struct ct_timer_instance *
+ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm);
+void ct_timer_instance_free(struct ct_timer_instance *ti);
+void ct_timer_start(struct ct_timer_instance *ti);
+void ct_timer_stop(struct ct_timer_instance *ti);
+void ct_timer_prepare(struct ct_timer_instance *ti);
+
+#endif /* __CTTIMER_H */
diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c
new file mode 100644
index 00000000000..67665a7e43c
--- /dev/null
+++ b/sound/pci/ctxfi/ctvmem.c
@@ -0,0 +1,250 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctvmem.c
+ *
+ * @Brief
+ * This file contains the implementation of virtual memory management object
+ * for card device.
+ *
+ * @Author Liu Chun
+ * @Date Apr 1 2008
+ */
+
+#include "ctvmem.h"
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <sound/pcm.h>
+
+#define CT_PTES_PER_PAGE (CT_PAGE_SIZE / sizeof(void *))
+#define CT_ADDRS_PER_PAGE (CT_PTES_PER_PAGE * CT_PAGE_SIZE)
+
+/* *
+ * Find or create vm block based on requested @size.
+ * @size must be page aligned.
+ * */
+static struct ct_vm_block *
+get_vm_block(struct ct_vm *vm, unsigned int size)
+{
+	struct ct_vm_block *block = NULL, *entry;
+	struct list_head *pos;
+
+	size = CT_PAGE_ALIGN(size);
+	if (size > vm->size) {
+		printk(KERN_ERR "ctxfi: Fail! No sufficient device virtural "
+				  "memory space available!\n");
+		return NULL;
+	}
+
+	mutex_lock(&vm->lock);
+	list_for_each(pos, &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		if (entry->size >= size)
+			break; /* found a block that is big enough */
+	}
+	if (pos == &vm->unused)
+		goto out;
+
+	if (entry->size == size) {
+		/* Move the vm node from unused list to used list directly */
+		list_del(&entry->list);
+		list_add(&entry->list, &vm->used);
+		vm->size -= size;
+		block = entry;
+		goto out;
+	}
+
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (NULL == block)
+		goto out;
+
+	block->addr = entry->addr;
+	block->size = size;
+	list_add(&block->list, &vm->used);
+	entry->addr += size;
+	entry->size -= size;
+	vm->size -= size;
+
+ out:
+	mutex_unlock(&vm->lock);
+	return block;
+}
+
+static void put_vm_block(struct ct_vm *vm, struct ct_vm_block *block)
+{
+	struct ct_vm_block *entry, *pre_ent;
+	struct list_head *pos, *pre;
+
+	block->size = CT_PAGE_ALIGN(block->size);
+
+	mutex_lock(&vm->lock);
+	list_del(&block->list);
+	vm->size += block->size;
+
+	list_for_each(pos, &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		if (entry->addr >= (block->addr + block->size))
+			break; /* found a position */
+	}
+	if (pos == &vm->unused) {
+		list_add_tail(&block->list, &vm->unused);
+		entry = block;
+	} else {
+		if ((block->addr + block->size) == entry->addr) {
+			entry->addr = block->addr;
+			entry->size += block->size;
+			kfree(block);
+		} else {
+			__list_add(&block->list, pos->prev, pos);
+			entry = block;
+		}
+	}
+
+	pos = &entry->list;
+	pre = pos->prev;
+	while (pre != &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		pre_ent = list_entry(pre, struct ct_vm_block, list);
+		if ((pre_ent->addr + pre_ent->size) > entry->addr)
+			break;
+
+		pre_ent->size += entry->size;
+		list_del(pos);
+		kfree(entry);
+		pos = pre;
+		pre = pos->prev;
+	}
+	mutex_unlock(&vm->lock);
+}
+
+/* Map host addr (kmalloced/vmalloced) to device logical addr. */
+static struct ct_vm_block *
+ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size)
+{
+	struct ct_vm_block *block;
+	unsigned int pte_start;
+	unsigned i, pages;
+	unsigned long *ptp;
+
+	block = get_vm_block(vm, size);
+	if (block == NULL) {
+		printk(KERN_ERR "ctxfi: No virtual memory block that is big "
+				  "enough to allocate!\n");
+		return NULL;
+	}
+
+	ptp = vm->ptp[0];
+	pte_start = (block->addr >> CT_PAGE_SHIFT);
+	pages = block->size >> CT_PAGE_SHIFT;
+	for (i = 0; i < pages; i++) {
+		unsigned long addr;
+		addr = snd_pcm_sgbuf_get_addr(substream, i << CT_PAGE_SHIFT);
+		ptp[pte_start + i] = addr;
+	}
+
+	block->size = size;
+	return block;
+}
+
+static void ct_vm_unmap(struct ct_vm *vm, struct ct_vm_block *block)
+{
+	/* do unmapping */
+	put_vm_block(vm, block);
+}
+
+/* *
+ * return the host (kmalloced) addr of the @index-th device
+ * page talbe page on success, or NULL on failure.
+ * The first returned NULL indicates the termination.
+ * */
+static void *
+ct_get_ptp_virt(struct ct_vm *vm, int index)
+{
+	void *addr;
+
+	addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index];
+
+	return addr;
+}
+
+int ct_vm_create(struct ct_vm **rvm)
+{
+	struct ct_vm *vm;
+	struct ct_vm_block *block;
+	int i;
+
+	*rvm = NULL;
+
+	vm = kzalloc(sizeof(*vm), GFP_KERNEL);
+	if (NULL == vm)
+		return -ENOMEM;
+
+	mutex_init(&vm->lock);
+
+	/* Allocate page table pages */
+	for (i = 0; i < CT_PTP_NUM; i++) {
+		vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		if (NULL == vm->ptp[i])
+			break;
+	}
+	if (!i) {
+		/* no page table pages are allocated */
+		kfree(vm);
+		return -ENOMEM;
+	}
+	vm->size = CT_ADDRS_PER_PAGE * i;
+	/* Initialise remaining ptps */
+	for (; i < CT_PTP_NUM; i++)
+		vm->ptp[i] = NULL;
+
+	vm->map = ct_vm_map;
+	vm->unmap = ct_vm_unmap;
+	vm->get_ptp_virt = ct_get_ptp_virt;
+	INIT_LIST_HEAD(&vm->unused);
+	INIT_LIST_HEAD(&vm->used);
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (NULL != block) {
+		block->addr = 0;
+		block->size = vm->size;
+		list_add(&block->list, &vm->unused);
+	}
+
+	*rvm = vm;
+	return 0;
+}
+
+/* The caller must ensure no mapping pages are being used
+ * by hardware before calling this function */
+void ct_vm_destroy(struct ct_vm *vm)
+{
+	int i;
+	struct list_head *pos;
+	struct ct_vm_block *entry;
+
+	/* free used and unused list nodes */
+	while (!list_empty(&vm->used)) {
+		pos = vm->used.next;
+		list_del(pos);
+		entry = list_entry(pos, struct ct_vm_block, list);
+		kfree(entry);
+	}
+	while (!list_empty(&vm->unused)) {
+		pos = vm->unused.next;
+		list_del(pos);
+		entry = list_entry(pos, struct ct_vm_block, list);
+		kfree(entry);
+	}
+
+	/* free allocated page table pages */
+	for (i = 0; i < CT_PTP_NUM; i++)
+		kfree(vm->ptp[i]);
+
+	vm->size = 0;
+
+	kfree(vm);
+}
diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h
new file mode 100644
index 00000000000..01e4fd0386a
--- /dev/null
+++ b/sound/pci/ctxfi/ctvmem.h
@@ -0,0 +1,61 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctvmem.h
+ *
+ * @Brief
+ * This file contains the definition of virtual memory management object
+ * for card device.
+ *
+ * @Author Liu Chun
+ * @Date Mar 28 2008
+ */
+
+#ifndef CTVMEM_H
+#define CTVMEM_H
+
+#define CT_PTP_NUM	1	/* num of device page table pages */
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+
+/* The chip can handle the page table of 4k pages
+ * (emu20k1 can handle even 8k pages, but we don't use it right now)
+ */
+#define CT_PAGE_SIZE	4096
+#define CT_PAGE_SHIFT	12
+#define CT_PAGE_MASK	(~(PAGE_SIZE - 1))
+#define CT_PAGE_ALIGN(addr)	ALIGN(addr, CT_PAGE_SIZE)
+
+struct ct_vm_block {
+	unsigned int addr;	/* starting logical addr of this block */
+	unsigned int size;	/* size of this device virtual mem block */
+	struct list_head list;
+};
+
+struct snd_pcm_substream;
+
+/* Virtual memory management object for card device */
+struct ct_vm {
+	void *ptp[CT_PTP_NUM];		/* Device page table pages */
+	unsigned int size;		/* Available addr space in bytes */
+	struct list_head unused;	/* List of unused blocks */
+	struct list_head used;		/* List of used blocks */
+	struct mutex lock;
+
+	/* Map host addr (kmalloced/vmalloced) to device logical addr. */
+	struct ct_vm_block *(*map)(struct ct_vm *, struct snd_pcm_substream *,
+				   int size);
+	/* Unmap device logical addr area. */
+	void (*unmap)(struct ct_vm *, struct ct_vm_block *block);
+	void *(*get_ptp_virt)(struct ct_vm *vm, int index);
+};
+
+int ct_vm_create(struct ct_vm **rvm);
+void ct_vm_destroy(struct ct_vm *vm);
+
+#endif /* CTVMEM_H */
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
new file mode 100644
index 00000000000..2d3dd89af15
--- /dev/null
+++ b/sound/pci/ctxfi/xfi.c
@@ -0,0 +1,142 @@
+/*
+ * xfi linux driver.
+ *
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+#include <linux/pci_ids.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include "ctatc.h"
+#include "cthardware.h"
+
+MODULE_AUTHOR("Creative Technology Ltd");
+MODULE_DESCRIPTION("X-Fi driver version 1.03");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{Creative Labs, Sound Blaster X-Fi}");
+
+static unsigned int reference_rate = 48000;
+static unsigned int multiple = 2;
+MODULE_PARM_DESC(reference_rate, "Reference rate (default=48000)");
+module_param(reference_rate, uint, S_IRUGO);
+MODULE_PARM_DESC(multiple, "Rate multiplier (default=2)");
+module_param(multiple, uint, S_IRUGO);
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Creative X-Fi driver");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for Creative X-Fi driver");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable Creative X-Fi driver");
+
+static struct pci_device_id ct_pci_dev_ids[] = {
+	/* only X-Fi is supported, so... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K1),
+	  .driver_data = ATC20K1,
+	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2),
+	  .driver_data = ATC20K2,
+	},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, ct_pci_dev_ids);
+
+static int __devinit
+ct_card_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct ct_atc *atc;
+	int err;
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	if (err)
+		return err;
+	if ((reference_rate != 48000) && (reference_rate != 44100)) {
+		printk(KERN_ERR "ctxfi: Invalid reference_rate value %u!!!\n",
+		       reference_rate);
+		printk(KERN_ERR "ctxfi: The valid values for reference_rate "
+		       "are 48000 and 44100, Value 48000 is assumed.\n");
+		reference_rate = 48000;
+	}
+	if ((multiple != 1) && (multiple != 2)) {
+		printk(KERN_ERR "ctxfi: Invalid multiple value %u!!!\n",
+		       multiple);
+		printk(KERN_ERR "ctxfi: The valid values for multiple are "
+		       "1 and 2, Value 2 is assumed.\n");
+		multiple = 2;
+	}
+	err = ct_atc_create(card, pci, reference_rate, multiple,
+			    pci_id->driver_data, &atc);
+	if (err < 0)
+		goto error;
+
+	card->private_data = atc;
+
+	/* Create alsa devices supported by this card */
+	err = ct_atc_create_alsa_devs(atc);
+	if (err < 0)
+		goto error;
+
+	strcpy(card->driver, "SB-XFi");
+	strcpy(card->shortname, "Creative X-Fi");
+	snprintf(card->longname, sizeof(card->longname), "%s %s %s",
+		 card->shortname, atc->chip_name, atc->model_name);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+
+	pci_set_drvdata(pci, card);
+	dev++;
+
+	return 0;
+
+error:
+	snd_card_free(card);
+	return err;
+}
+
+static void __devexit ct_card_remove(struct pci_dev *pci)
+{
+	snd_card_free(pci_get_drvdata(pci));
+	pci_set_drvdata(pci, NULL);
+}
+
+static struct pci_driver ct_driver = {
+	.name = "SB-XFi",
+	.id_table = ct_pci_dev_ids,
+	.probe = ct_card_probe,
+	.remove = __devexit_p(ct_card_remove),
+};
+
+static int __init ct_card_init(void)
+{
+	return pci_register_driver(&ct_driver);
+}
+
+static void __exit ct_card_exit(void)
+{
+	pci_unregister_driver(&ct_driver);
+}
+
+module_init(ct_card_init)
+module_exit(ct_card_exit)
diff --git a/sound/pci/emu10k1/Makefile b/sound/pci/emu10k1/Makefile
index cf2d5636d8b..fc5591e7777 100644
--- a/sound/pci/emu10k1/Makefile
+++ b/sound/pci/emu10k1/Makefile
@@ -9,15 +9,7 @@ snd-emu10k1-objs := emu10k1.o emu10k1_main.o \
 snd-emu10k1-synth-objs := emu10k1_synth.o emu10k1_callback.o emu10k1_patch.o
 snd-emu10k1x-objs := emu10k1x.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_EMU10K1) += snd-emu10k1.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emu10k1-synth.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emu10k1-synth.o
 obj-$(CONFIG_SND_EMU10K1X) += snd-emu10k1x.o
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 1970f0e70f3..4d3ad793e98 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -858,7 +858,6 @@ static int __devinit snd_emu10k1x_pcm(struct emu10k1x *emu, int device, struct s
 	}
 
 	pcm->info_flags = 0;
-	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
 	switch(device) {
 	case 0:
 		strcpy(pcm->name, "EMU10K1X Front");
diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c
index 78f62fd404c..55b83ef73c6 100644
--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -1736,7 +1736,7 @@ static struct snd_pcm_hardware snd_emu10k1_fx8010_playback =
 	.buffer_bytes_max =	(128*1024),
 	.period_bytes_min =	1024,
 	.period_bytes_max =	(128*1024),
-	.periods_min =		1,
+	.periods_min =		2,
 	.periods_max =		1024,
 	.fifo_size =		0,
 };
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index eb2a19b894a..c710150d506 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -139,6 +139,19 @@ config SND_HDA_CODEC_CONEXANT
 	  snd-hda-codec-conexant.
 	  This module is automatically loaded at probing.
 
+config SND_HDA_CODEC_CA0110
+	bool "Build Creative CA0110-IBG codec support"
+	depends on SND_HDA_INTEL
+	default y
+	help
+	  Say Y here to include Creative CA0110-IBG codec support in
+	  snd-hda-intel driver, found on some Creative X-Fi cards.
+
+	  When the HD-audio driver is built as a module, the codec
+	  support code is also built as another module,
+	  snd-hda-codec-ca0110.
+	  This module is automatically loaded at probing.
+
 config SND_HDA_CODEC_CMEDIA
 	bool "Build C-Media HD-audio codec support"
 	default y
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 50f9d096725..e3081d4586c 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -13,6 +13,7 @@ snd-hda-codec-analog-objs :=	patch_analog.o
 snd-hda-codec-idt-objs :=	patch_sigmatel.o
 snd-hda-codec-si3054-objs :=	patch_si3054.o
 snd-hda-codec-atihdmi-objs :=	patch_atihdmi.o
+snd-hda-codec-ca0110-objs :=	patch_ca0110.o
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-nvhdmi-objs :=	patch_nvhdmi.o
@@ -40,6 +41,9 @@ endif
 ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
 endif
+ifdef CONFIG_SND_HDA_CODEC_CA0110
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
+endif
 ifdef CONFIG_SND_HDA_CODEC_CONEXANT
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
 endif
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 4de5bacd392..29272f2e95a 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -45,6 +45,46 @@ static void snd_hda_generate_beep(struct work_struct *work)
 			AC_VERB_SET_BEEP_CONTROL, beep->tone);
 }
 
+/* (non-standard) Linear beep tone calculation for IDT/STAC codecs 
+ *
+ * The tone frequency of beep generator on IDT/STAC codecs is
+ * defined from the 8bit tone parameter, in Hz,
+ *    freq = 48000 * (257 - tone) / 1024
+ * that is from 12kHz to 93.75kHz in step of 46.875 hz
+ */
+static int beep_linear_tone(struct hda_beep *beep, int hz)
+{
+	hz *= 1000; /* fixed point */
+	hz = hz - DIGBEEP_HZ_MIN;
+	if (hz < 0)
+		hz = 0; /* turn off PC beep*/
+	else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
+		hz = 0xff;
+	else {
+		hz /= DIGBEEP_HZ_STEP;
+		hz++;
+	}
+	return hz;
+}
+
+/* HD-audio standard beep tone parameter calculation
+ *
+ * The tone frequency in Hz is calculated as
+ *   freq = 48000 / (tone * 4)
+ * from 47Hz to 12kHz
+ */
+static int beep_standard_tone(struct hda_beep *beep, int hz)
+{
+	if (hz <= 0)
+		return 0; /* disabled */
+	hz = 12000 / hz;
+	if (hz > 0xff)
+		return 0xff;
+	if (hz <= 0)
+		return 1;
+	return hz;
+}
+
 static int snd_hda_beep_event(struct input_dev *dev, unsigned int type,
 				unsigned int code, int hz)
 {
@@ -55,21 +95,14 @@ static int snd_hda_beep_event(struct input_dev *dev, unsigned int type,
 		if (hz)
 			hz = 1000;
 	case SND_TONE:
-		hz *= 1000; /* fixed point */
-		hz = hz - DIGBEEP_HZ_MIN;
-		if (hz < 0)
-			hz = 0; /* turn off PC beep*/
-		else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
-			hz = 0xff;
-		else {
-			hz /= DIGBEEP_HZ_STEP;
-			hz++;
-		}
+		if (beep->linear_tone)
+			beep->tone = beep_linear_tone(beep, hz);
+		else
+			beep->tone = beep_standard_tone(beep, hz);
 		break;
 	default:
 		return -1;
 	}
-	beep->tone = hz;
 
 	/* schedule beep event */
 	schedule_work(&beep->beep_work);
diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h
index 51bf6a5daf3..0c3de787c71 100644
--- a/sound/pci/hda/hda_beep.h
+++ b/sound/pci/hda/hda_beep.h
@@ -30,8 +30,9 @@ struct hda_beep {
 	struct hda_codec *codec;
 	char phys[32];
 	int tone;
-	int nid;
-	int enabled;
+	hda_nid_t nid;
+	unsigned int enabled:1;
+	unsigned int linear_tone:1;	/* linear tone for IDT/STAC codec */
 	struct work_struct beep_work; /* scheduled task for beep event */
 };
 
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 8820faf6c9d..562403a2348 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -48,6 +48,7 @@ static struct hda_vendor_id hda_vendor_ids[] = {
 	{ 0x1095, "Silicon Image" },
 	{ 0x10de, "Nvidia" },
 	{ 0x10ec, "Realtek" },
+	{ 0x1102, "Creative" },
 	{ 0x1106, "VIA" },
 	{ 0x111d, "IDT" },
 	{ 0x11c1, "LSI" },
@@ -157,6 +158,39 @@ make_codec_cmd(struct hda_codec *codec, hda_nid_t nid, int direct,
 	return val;
 }
 
+/*
+ * Send and receive a verb
+ */
+static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd,
+			   unsigned int *res)
+{
+	struct hda_bus *bus = codec->bus;
+	int err;
+
+	if (res)
+		*res = -1;
+ again:
+	snd_hda_power_up(codec);
+	mutex_lock(&bus->cmd_mutex);
+	err = bus->ops.command(bus, cmd);
+	if (!err && res)
+		*res = bus->ops.get_response(bus);
+	mutex_unlock(&bus->cmd_mutex);
+	snd_hda_power_down(codec);
+	if (res && *res == -1 && bus->rirb_error) {
+		if (bus->response_reset) {
+			snd_printd("hda_codec: resetting BUS due to "
+				   "fatal communication error\n");
+			bus->ops.bus_reset(bus);
+		}
+		goto again;
+	}
+	/* clear reset-flag when the communication gets recovered */
+	if (!err)
+		bus->response_reset = 0;
+	return err;
+}
+
 /**
  * snd_hda_codec_read - send a command and get the response
  * @codec: the HDA codec
@@ -173,18 +207,9 @@ unsigned int snd_hda_codec_read(struct hda_codec *codec, hda_nid_t nid,
 				int direct,
 				unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
+	unsigned cmd = make_codec_cmd(codec, nid, direct, verb, parm);
 	unsigned int res;
-
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	if (!bus->ops.command(bus, res))
-		res = bus->ops.get_response(bus);
-	else
-		res = (unsigned int)-1;
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
+	codec_exec_verb(codec, cmd, &res);
 	return res;
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_read);
@@ -204,17 +229,10 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_read);
 int snd_hda_codec_write(struct hda_codec *codec, hda_nid_t nid, int direct,
 			 unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
+	unsigned int cmd = make_codec_cmd(codec, nid, direct, verb, parm);
 	unsigned int res;
-	int err;
-
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	err = bus->ops.command(bus, res);
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
-	return err;
+	return codec_exec_verb(codec, cmd,
+			       codec->bus->sync_write ? &res : NULL);
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write);
 
@@ -613,7 +631,10 @@ static int get_codec_name(struct hda_codec *codec)
 	const struct hda_vendor_id *c;
 	const char *vendor = NULL;
 	u16 vendor_id = codec->vendor_id >> 16;
-	char tmp[16], name[32];
+	char tmp[16];
+
+	if (codec->vendor_name)
+		goto get_chip_name;
 
 	for (c = hda_vendor_ids; c->id; c++) {
 		if (c->id == vendor_id) {
@@ -625,14 +646,21 @@ static int get_codec_name(struct hda_codec *codec)
 		sprintf(tmp, "Generic %04x", vendor_id);
 		vendor = tmp;
 	}
+	codec->vendor_name = kstrdup(vendor, GFP_KERNEL);
+	if (!codec->vendor_name)
+		return -ENOMEM;
+
+ get_chip_name:
+	if (codec->chip_name)
+		return 0;
+
 	if (codec->preset && codec->preset->name)
-		snprintf(name, sizeof(name), "%s %s", vendor,
-			 codec->preset->name);
-	else
-		snprintf(name, sizeof(name), "%s ID %x", vendor,
-			 codec->vendor_id & 0xffff);
-	codec->name = kstrdup(name, GFP_KERNEL);
-	if (!codec->name)
+		codec->chip_name = kstrdup(codec->preset->name, GFP_KERNEL);
+	else {
+		sprintf(tmp, "ID %x", codec->vendor_id & 0xffff);
+		codec->chip_name = kstrdup(tmp, GFP_KERNEL);
+	}
+	if (!codec->chip_name)
 		return -ENOMEM;
 	return 0;
 }
@@ -838,7 +866,8 @@ static void snd_hda_codec_free(struct hda_codec *codec)
 	module_put(codec->owner);
 	free_hda_cache(&codec->amp_cache);
 	free_hda_cache(&codec->cmd_cache);
-	kfree(codec->name);
+	kfree(codec->vendor_name);
+	kfree(codec->chip_name);
 	kfree(codec->modelname);
 	kfree(codec->wcaps);
 	kfree(codec);
@@ -979,15 +1008,16 @@ int snd_hda_codec_configure(struct hda_codec *codec)
 	int err;
 
 	codec->preset = find_codec_preset(codec);
-	if (!codec->name) {
+	if (!codec->vendor_name || !codec->chip_name) {
 		err = get_codec_name(codec);
 		if (err < 0)
 			return err;
 	}
 	/* audio codec should override the mixer name */
 	if (codec->afg || !*codec->bus->card->mixername)
-		strlcpy(codec->bus->card->mixername, codec->name,
-			sizeof(codec->bus->card->mixername));
+		snprintf(codec->bus->card->mixername,
+			 sizeof(codec->bus->card->mixername),
+			 "%s %s", codec->vendor_name, codec->chip_name);
 
 	if (is_generic_config(codec)) {
 		err = snd_hda_parse_generic_codec(codec);
@@ -1055,6 +1085,8 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream);
 /* FIXME: more better hash key? */
 #define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
 #define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
+#define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
+#define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
 #define INFO_AMP_CAPS	(1<<0)
 #define INFO_AMP_VOL(ch)	(1 << (1 + (ch)))
 
@@ -1145,19 +1177,32 @@ int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
 }
 EXPORT_SYMBOL_HDA(snd_hda_override_amp_caps);
 
-u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
+static unsigned int
+query_caps_hash(struct hda_codec *codec, hda_nid_t nid, u32 key,
+		unsigned int (*func)(struct hda_codec *, hda_nid_t))
 {
 	struct hda_amp_info *info;
 
-	info = get_alloc_amp_hash(codec, HDA_HASH_PINCAP_KEY(nid));
+	info = get_alloc_amp_hash(codec, key);
 	if (!info)
 		return 0;
 	if (!info->head.val) {
-		info->amp_caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
 		info->head.val |= INFO_AMP_CAPS;
+		info->amp_caps = func(codec, nid);
 	}
 	return info->amp_caps;
 }
+
+static unsigned int read_pin_cap(struct hda_codec *codec, hda_nid_t nid)
+{
+	return snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+}
+
+u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PINCAP_KEY(nid),
+			       read_pin_cap);
+}
 EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps);
 
 /*
@@ -1432,6 +1477,8 @@ _snd_hda_find_mixer_ctl(struct hda_codec *codec,
 	memset(&id, 0, sizeof(id));
 	id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 	id.index = idx;
+	if (snd_BUG_ON(strlen(name) >= sizeof(id.name)))
+		return NULL;
 	strcpy(id.name, name);
 	return snd_ctl_find_id(codec->bus->card, &id);
 }
@@ -2242,28 +2289,22 @@ EXPORT_SYMBOL_HDA(snd_hda_create_spdif_in_ctls);
 int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid,
 			      int direct, unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
-	unsigned int res;
-	int err;
+	int err = snd_hda_codec_write(codec, nid, direct, verb, parm);
+	struct hda_cache_head *c;
+	u32 key;
 
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	err = bus->ops.command(bus, res);
-	if (!err) {
-		struct hda_cache_head *c;
-		u32 key;
-		/* parm may contain the verb stuff for get/set amp */
-		verb = verb | (parm >> 8);
-		parm &= 0xff;
-		key = build_cmd_cache_key(nid, verb);
-		c = get_alloc_hash(&codec->cmd_cache, key);
-		if (c)
-			c->val = parm;
-	}
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
-	return err;
+	if (err < 0)
+		return err;
+	/* parm may contain the verb stuff for get/set amp */
+	verb = verb | (parm >> 8);
+	parm &= 0xff;
+	key = build_cmd_cache_key(nid, verb);
+	mutex_lock(&codec->bus->cmd_mutex);
+	c = get_alloc_hash(&codec->cmd_cache, key);
+	if (c)
+		c->val = parm;
+	mutex_unlock(&codec->bus->cmd_mutex);
+	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write_cache);
 
@@ -2321,7 +2362,8 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
 		if (wcaps & AC_WCAP_POWER) {
 			unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
 				AC_WCAP_TYPE_SHIFT;
-			if (wid_type == AC_WID_PIN) {
+			if (power_state == AC_PWRST_D3 &&
+			    wid_type == AC_WID_PIN) {
 				unsigned int pincap;
 				/*
 				 * don't power down the widget if it controls
@@ -2333,7 +2375,7 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
 						nid, 0,
 						AC_VERB_GET_EAPD_BTLENABLE, 0);
 					eapd &= 0x02;
-					if (power_state == AC_PWRST_D3 && eapd)
+					if (eapd)
 						continue;
 				}
 			}
@@ -2544,6 +2586,41 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate,
 }
 EXPORT_SYMBOL_HDA(snd_hda_calc_stream_format);
 
+static unsigned int get_pcm_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int val = 0;
+	if (nid != codec->afg &&
+	    (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD))
+		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
+	if (!val || val == -1)
+		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
+	if (!val || val == -1)
+		return 0;
+	return val;
+}
+
+static unsigned int query_pcm_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PARPCM_KEY(nid),
+			       get_pcm_param);
+}
+
+static unsigned int get_stream_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
+	if (!streams || streams == -1)
+		streams = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
+	if (!streams || streams == -1)
+		return 0;
+	return streams;
+}
+
+static unsigned int query_stream_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PARSTR_KEY(nid),
+			       get_stream_param);
+}
+
 /**
  * snd_hda_query_supported_pcm - query the supported PCM rates and formats
  * @codec: the HDA codec
@@ -2562,15 +2639,8 @@ static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
 {
 	unsigned int i, val, wcaps;
 
-	val = 0;
 	wcaps = get_wcaps(codec, nid);
-	if (nid != codec->afg && (wcaps & AC_WCAP_FORMAT_OVRD)) {
-		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
-		if (val == -1)
-			return -EIO;
-	}
-	if (!val)
-		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
+	val = query_pcm_param(codec, nid);
 
 	if (ratesp) {
 		u32 rates = 0;
@@ -2592,15 +2662,9 @@ static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
 		u64 formats = 0;
 		unsigned int streams, bps;
 
-		streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
-		if (streams == -1)
+		streams = query_stream_param(codec, nid);
+		if (!streams)
 			return -EIO;
-		if (!streams) {
-			streams = snd_hda_param_read(codec, codec->afg,
-						     AC_PAR_STREAM);
-			if (streams == -1)
-				return -EIO;
-		}
 
 		bps = 0;
 		if (streams & AC_SUPFMT_PCM) {
@@ -2674,17 +2738,9 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid,
 	int i;
 	unsigned int val = 0, rate, stream;
 
-	if (nid != codec->afg &&
-	    (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) {
-		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
-		if (val == -1)
-			return 0;
-	}
-	if (!val) {
-		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
-		if (val == -1)
-			return 0;
-	}
+	val = query_pcm_param(codec, nid);
+	if (!val)
+		return 0;
 
 	rate = format & 0xff00;
 	for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++)
@@ -2696,12 +2752,8 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid,
 	if (i >= AC_PAR_PCM_RATE_BITS)
 		return 0;
 
-	stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
-	if (stream == -1)
-		return 0;
-	if (!stream && nid != codec->afg)
-		stream = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
-	if (!stream || stream == -1)
+	stream = query_stream_param(codec, nid);
+	if (!stream)
 		return 0;
 
 	if (stream & AC_SUPFMT_PCM) {
@@ -3835,11 +3887,10 @@ EXPORT_SYMBOL_HDA(auto_pin_cfg_labels);
 /**
  * snd_hda_suspend - suspend the codecs
  * @bus: the HDA bus
- * @state: suspsend state
  *
  * Returns 0 if successful.
  */
-int snd_hda_suspend(struct hda_bus *bus, pm_message_t state)
+int snd_hda_suspend(struct hda_bus *bus)
 {
 	struct hda_codec *codec;
 
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 2fdecf4b0eb..cad79efaabc 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -574,6 +574,8 @@ struct hda_bus_ops {
 	/* attach a PCM stream */
 	int (*attach_pcm)(struct hda_bus *bus, struct hda_codec *codec,
 			  struct hda_pcm *pcm);
+	/* reset bus for retry verb */
+	void (*bus_reset)(struct hda_bus *bus);
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	/* notify power-up/down from codec to controller */
 	void (*pm_notify)(struct hda_bus *bus);
@@ -622,7 +624,13 @@ struct hda_bus {
 
 	/* misc op flags */
 	unsigned int needs_damn_long_delay :1;
+	unsigned int allow_bus_reset:1;	/* allow bus reset at fatal error */
+	unsigned int sync_write:1;	/* sync after verb write */
+	/* status for codec/controller */
 	unsigned int shutdown :1;	/* being unloaded */
+	unsigned int rirb_error:1;	/* error in codec communication */
+	unsigned int response_reset:1;	/* controller was reset */
+	unsigned int in_reset:1;	/* during reset operation */
 };
 
 /*
@@ -747,7 +755,8 @@ struct hda_codec {
 	/* detected preset */
 	const struct hda_codec_preset *preset;
 	struct module *owner;
-	const char *name;	/* codec name */
+	const char *vendor_name;	/* codec vendor name */
+	const char *chip_name;		/* codec chip name */
 	const char *modelname;	/* model name for preset */
 
 	/* set by patch */
@@ -905,7 +914,7 @@ void snd_hda_get_codec_name(struct hda_codec *codec, char *name, int namelen);
  * power management
  */
 #ifdef CONFIG_PM
-int snd_hda_suspend(struct hda_bus *bus, pm_message_t state);
+int snd_hda_suspend(struct hda_bus *bus);
 int snd_hda_resume(struct hda_bus *bus);
 #endif
 
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 1c57505c287..6812fbe80fa 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -242,7 +242,8 @@ CODEC_INFO_SHOW(subsystem_id);
 CODEC_INFO_SHOW(revision_id);
 CODEC_INFO_SHOW(afg);
 CODEC_INFO_SHOW(mfg);
-CODEC_INFO_STR_SHOW(name);
+CODEC_INFO_STR_SHOW(vendor_name);
+CODEC_INFO_STR_SHOW(chip_name);
 CODEC_INFO_STR_SHOW(modelname);
 
 #define CODEC_INFO_STORE(type)					\
@@ -275,7 +276,8 @@ static ssize_t type##_store(struct device *dev,			\
 CODEC_INFO_STORE(vendor_id);
 CODEC_INFO_STORE(subsystem_id);
 CODEC_INFO_STORE(revision_id);
-CODEC_INFO_STR_STORE(name);
+CODEC_INFO_STR_STORE(vendor_name);
+CODEC_INFO_STR_STORE(chip_name);
 CODEC_INFO_STR_STORE(modelname);
 
 #define CODEC_ACTION_STORE(type)				\
@@ -499,7 +501,8 @@ static struct device_attribute codec_attrs[] = {
 	CODEC_ATTR_RW(revision_id),
 	CODEC_ATTR_RO(afg),
 	CODEC_ATTR_RO(mfg),
-	CODEC_ATTR_RW(name),
+	CODEC_ATTR_RW(vendor_name),
+	CODEC_ATTR_RW(chip_name),
 	CODEC_ATTR_RW(modelname),
 	CODEC_ATTR_RW(init_verbs),
 	CODEC_ATTR_RW(hints),
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3128e1a6bc6..4e9ea708027 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -128,21 +128,33 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
 			 "{ULI, M5461}}");
 MODULE_DESCRIPTION("Intel HDA driver");
 
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+#define SFX	/* nop */
+#else
 #define SFX	"hda-intel: "
-
+#endif
 
 /*
  * registers
  */
 #define ICH6_REG_GCAP			0x00
+#define   ICH6_GCAP_64OK	(1 << 0)   /* 64bit address support */
+#define   ICH6_GCAP_NSDO	(3 << 1)   /* # of serial data out signals */
+#define   ICH6_GCAP_BSS		(31 << 3)  /* # of bidirectional streams */
+#define   ICH6_GCAP_ISS		(15 << 8)  /* # of input streams */
+#define   ICH6_GCAP_OSS		(15 << 12) /* # of output streams */
 #define ICH6_REG_VMIN			0x02
 #define ICH6_REG_VMAJ			0x03
 #define ICH6_REG_OUTPAY			0x04
 #define ICH6_REG_INPAY			0x06
 #define ICH6_REG_GCTL			0x08
+#define   ICH6_GCTL_RESET	(1 << 0)   /* controller reset */
+#define   ICH6_GCTL_FCNTRL	(1 << 1)   /* flush control */
+#define   ICH6_GCTL_UNSOL	(1 << 8)   /* accept unsol. response enable */
 #define ICH6_REG_WAKEEN			0x0c
 #define ICH6_REG_STATESTS		0x0e
 #define ICH6_REG_GSTS			0x10
+#define   ICH6_GSTS_FSTS	(1 << 1)   /* flush status */
 #define ICH6_REG_INTCTL			0x20
 #define ICH6_REG_INTSTS			0x24
 #define ICH6_REG_WALCLK			0x30
@@ -150,17 +162,27 @@ MODULE_DESCRIPTION("Intel HDA driver");
 #define ICH6_REG_CORBLBASE		0x40
 #define ICH6_REG_CORBUBASE		0x44
 #define ICH6_REG_CORBWP			0x48
-#define ICH6_REG_CORBRP			0x4A
+#define ICH6_REG_CORBRP			0x4a
+#define   ICH6_CORBRP_RST	(1 << 15)  /* read pointer reset */
 #define ICH6_REG_CORBCTL		0x4c
+#define   ICH6_CORBCTL_RUN	(1 << 1)   /* enable DMA */
+#define   ICH6_CORBCTL_CMEIE	(1 << 0)   /* enable memory error irq */
 #define ICH6_REG_CORBSTS		0x4d
+#define   ICH6_CORBSTS_CMEI	(1 << 0)   /* memory error indication */
 #define ICH6_REG_CORBSIZE		0x4e
 
 #define ICH6_REG_RIRBLBASE		0x50
 #define ICH6_REG_RIRBUBASE		0x54
 #define ICH6_REG_RIRBWP			0x58
+#define   ICH6_RIRBWP_RST	(1 << 15)  /* write pointer reset */
 #define ICH6_REG_RINTCNT		0x5a
 #define ICH6_REG_RIRBCTL		0x5c
+#define   ICH6_RBCTL_IRQ_EN	(1 << 0)   /* enable IRQ */
+#define   ICH6_RBCTL_DMA_EN	(1 << 1)   /* enable DMA */
+#define   ICH6_RBCTL_OVERRUN_EN	(1 << 2)   /* enable overrun irq */
 #define ICH6_REG_RIRBSTS		0x5d
+#define   ICH6_RBSTS_IRQ	(1 << 0)   /* response irq */
+#define   ICH6_RBSTS_OVERRUN	(1 << 2)   /* overrun irq */
 #define ICH6_REG_RIRBSIZE		0x5e
 
 #define ICH6_REG_IC			0x60
@@ -257,16 +279,6 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 #define ICH6_INT_CTRL_EN	0x40000000 /* controller interrupt enable bit */
 #define ICH6_INT_GLOBAL_EN	0x80000000 /* global interrupt enable bit */
 
-/* GCTL unsolicited response enable bit */
-#define ICH6_GCTL_UREN		(1<<8)
-
-/* GCTL reset bit */
-#define ICH6_GCTL_RESET		(1<<0)
-
-/* CORB/RIRB control, read/write pointer */
-#define ICH6_RBCTL_DMA_EN	0x02	/* enable DMA */
-#define ICH6_RBCTL_IRQ_EN	0x01	/* enable IRQ */
-#define ICH6_RBRWP_CLR		0x8000	/* read/write pointer clear */
 /* below are so far hardcoded - should read registers in future */
 #define ICH6_MAX_CORB_ENTRIES	256
 #define ICH6_MAX_RIRB_ENTRIES	256
@@ -512,25 +524,25 @@ static void azx_init_cmd_io(struct azx *chip)
 	/* set the corb write pointer to 0 */
 	azx_writew(chip, CORBWP, 0);
 	/* reset the corb hw read pointer */
-	azx_writew(chip, CORBRP, ICH6_RBRWP_CLR);
+	azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
 	/* enable corb dma */
-	azx_writeb(chip, CORBCTL, ICH6_RBCTL_DMA_EN);
+	azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
 
 	/* RIRB set up */
 	chip->rirb.addr = chip->rb.addr + 2048;
 	chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
+	chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0;
 	azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
 	azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
 
 	/* set the rirb size to 256 entries (ULI requires explicitly) */
 	azx_writeb(chip, RIRBSIZE, 0x02);
 	/* reset the rirb hw write pointer */
-	azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR);
+	azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST);
 	/* set N=1, get RIRB response interrupt for new entry */
 	azx_writew(chip, RINTCNT, 1);
 	/* enable rirb dma and response irq */
 	azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
-	chip->rirb.rp = chip->rirb.cmds = 0;
 }
 
 static void azx_free_cmd_io(struct azx *chip)
@@ -606,6 +618,7 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 		}
 		if (!chip->rirb.cmds) {
 			smp_rmb();
+			bus->rirb_error = 0;
 			return chip->rirb.res; /* the last value */
 		}
 		if (time_after(jiffies, timeout))
@@ -619,19 +632,21 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 	}
 
 	if (chip->msi) {
-		snd_printk(KERN_WARNING "hda_intel: No response from codec, "
+		snd_printk(KERN_WARNING SFX "No response from codec, "
 			   "disabling MSI: last cmd=0x%08x\n", chip->last_cmd);
 		free_irq(chip->irq, chip);
 		chip->irq = -1;
 		pci_disable_msi(chip->pci);
 		chip->msi = 0;
-		if (azx_acquire_irq(chip, 1) < 0)
+		if (azx_acquire_irq(chip, 1) < 0) {
+			bus->rirb_error = 1;
 			return -1;
+		}
 		goto again;
 	}
 
 	if (!chip->polling_mode) {
-		snd_printk(KERN_WARNING "hda_intel: azx_get_response timeout, "
+		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
 			   "switching to polling mode: last cmd=0x%08x\n",
 			   chip->last_cmd);
 		chip->polling_mode = 1;
@@ -646,14 +661,23 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 		return -1;
 	}
 
+	/* a fatal communication error; need either to reset or to fallback
+	 * to the single_cmd mode
+	 */
+	bus->rirb_error = 1;
+	if (bus->allow_bus_reset && !bus->response_reset && !bus->in_reset) {
+		bus->response_reset = 1;
+		return -1; /* give a chance to retry */
+	}
+
 	snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
 		   "switching to single_cmd mode: last cmd=0x%08x\n",
 		   chip->last_cmd);
-	chip->rirb.rp = azx_readb(chip, RIRBWP);
-	chip->rirb.cmds = 0;
-	/* switch to single_cmd mode */
 	chip->single_cmd = 1;
+	bus->response_reset = 0;
+	/* re-initialize CORB/RIRB */
 	azx_free_cmd_io(chip);
+	azx_init_cmd_io(chip);
 	return -1;
 }
 
@@ -667,12 +691,34 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
  *       I left the codes, however, for debugging/testing purposes.
  */
 
+/* receive a response */
+static int azx_single_wait_for_response(struct azx *chip)
+{
+	int timeout = 50;
+
+	while (timeout--) {
+		/* check IRV busy bit */
+		if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
+			/* reuse rirb.res as the response return value */
+			chip->rirb.res = azx_readl(chip, IR);
+			return 0;
+		}
+		udelay(1);
+	}
+	if (printk_ratelimit())
+		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
+			   azx_readw(chip, IRS));
+	chip->rirb.res = -1;
+	return -EIO;
+}
+
 /* send a command */
 static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 {
 	struct azx *chip = bus->private_data;
 	int timeout = 50;
 
+	bus->rirb_error = 0;
 	while (timeout--) {
 		/* check ICB busy bit */
 		if (!((azx_readw(chip, IRS) & ICH6_IRS_BUSY))) {
@@ -682,7 +728,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 			azx_writel(chip, IC, val);
 			azx_writew(chip, IRS, azx_readw(chip, IRS) |
 				   ICH6_IRS_BUSY);
-			return 0;
+			return azx_single_wait_for_response(chip);
 		}
 		udelay(1);
 	}
@@ -696,18 +742,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 static unsigned int azx_single_get_response(struct hda_bus *bus)
 {
 	struct azx *chip = bus->private_data;
-	int timeout = 50;
-
-	while (timeout--) {
-		/* check IRV busy bit */
-		if (azx_readw(chip, IRS) & ICH6_IRS_VALID)
-			return azx_readl(chip, IR);
-		udelay(1);
-	}
-	if (printk_ratelimit())
-		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
-			   azx_readw(chip, IRS));
-	return (unsigned int)-1;
+	return chip->rirb.res;
 }
 
 /*
@@ -775,17 +810,17 @@ static int azx_reset(struct azx *chip)
 
 	/* check to see if controller is ready */
 	if (!azx_readb(chip, GCTL)) {
-		snd_printd("azx_reset: controller not ready!\n");
+		snd_printd(SFX "azx_reset: controller not ready!\n");
 		return -EBUSY;
 	}
 
 	/* Accept unsolicited responses */
-	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UREN);
+	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL);
 
 	/* detect codecs */
 	if (!chip->codec_mask) {
 		chip->codec_mask = azx_readw(chip, STATESTS);
-		snd_printdd("codec_mask = 0x%x\n", chip->codec_mask);
+		snd_printdd(SFX "codec_mask = 0x%x\n", chip->codec_mask);
 	}
 
 	return 0;
@@ -895,8 +930,7 @@ static void azx_init_chip(struct azx *chip)
 	azx_int_enable(chip);
 
 	/* initialize the codec command I/O */
-	if (!chip->single_cmd)
-		azx_init_cmd_io(chip);
+	azx_init_cmd_io(chip);
 
 	/* program the position buffer */
 	azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
@@ -953,12 +987,12 @@ static void azx_init_pci(struct azx *chip)
 	case AZX_DRIVER_SCH:
 		pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
 		if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) {
-			pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, \
+			pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC,
 				snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP));
 			pci_read_config_word(chip->pci,
 				INTEL_SCH_HDA_DEVC, &snoop);
-			snd_printdd("HDA snoop disabled, enabling ... %s\n",\
-				(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) \
+			snd_printdd(SFX "HDA snoop disabled, enabling ... %s\n",
+				(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)
 				? "Failed" : "OK");
 		}
 		break;
@@ -1012,7 +1046,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id)
 	/* clear rirb int */
 	status = azx_readb(chip, RIRBSTS);
 	if (status & RIRB_INT_MASK) {
-		if (!chip->single_cmd && (status & RIRB_INT_RESPONSE))
+		if (status & RIRB_INT_RESPONSE)
 			azx_update_rirb(chip);
 		azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 	}
@@ -1098,7 +1132,7 @@ static int azx_setup_periods(struct azx *chip,
 				pos_align;
 		pos_adj = frames_to_bytes(runtime, pos_adj);
 		if (pos_adj >= period_bytes) {
-			snd_printk(KERN_WARNING "Too big adjustment %d\n",
+			snd_printk(KERN_WARNING SFX "Too big adjustment %d\n",
 				   bdl_pos_adj[chip->dev_index]);
 			pos_adj = 0;
 		} else {
@@ -1122,7 +1156,7 @@ static int azx_setup_periods(struct azx *chip,
 	return 0;
 
  error:
-	snd_printk(KERN_ERR "Too many BDL entries: buffer=%d, period=%d\n",
+	snd_printk(KERN_ERR SFX "Too many BDL entries: buffer=%d, period=%d\n",
 		   azx_dev->bufsize, period_bytes);
 	return -EINVAL;
 }
@@ -1215,7 +1249,7 @@ static int probe_codec(struct azx *chip, int addr)
 	chip->probing = 0;
 	if (res == -1)
 		return -EIO;
-	snd_printdd("hda_intel: codec #%d probed OK\n", addr);
+	snd_printdd(SFX "codec #%d probed OK\n", addr);
 	return 0;
 }
 
@@ -1223,6 +1257,26 @@ static int azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
 				 struct hda_pcm *cpcm);
 static void azx_stop_chip(struct azx *chip);
 
+static void azx_bus_reset(struct hda_bus *bus)
+{
+	struct azx *chip = bus->private_data;
+
+	bus->in_reset = 1;
+	azx_stop_chip(chip);
+	azx_init_chip(chip);
+#ifdef CONFIG_PM
+	if (chip->initialized) {
+		int i;
+
+		for (i = 0; i < AZX_MAX_PCMS; i++)
+			snd_pcm_suspend_all(chip->pcm[i]);
+		snd_hda_suspend(chip->bus);
+		snd_hda_resume(chip->bus);
+	}
+#endif
+	bus->in_reset = 0;
+}
+
 /*
  * Codec initialization
  */
@@ -1246,6 +1300,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model,
 	bus_temp.ops.command = azx_send_cmd;
 	bus_temp.ops.get_response = azx_get_response;
 	bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
+	bus_temp.ops.bus_reset = azx_bus_reset;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	bus_temp.power_save = &power_save;
 	bus_temp.ops.pm_notify = azx_power_notify;
@@ -1270,8 +1325,8 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model,
 				/* Some BIOSen give you wrong codec addresses
 				 * that don't exist
 				 */
-				snd_printk(KERN_WARNING
-					   "hda_intel: Codec #%d probe error; "
+				snd_printk(KERN_WARNING SFX
+					   "Codec #%d probe error; "
 					   "disabling it...\n", c);
 				chip->codec_mask &= ~(1 << c);
 				/* More badly, accessing to a non-existing
@@ -1487,7 +1542,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
 	bufsize = snd_pcm_lib_buffer_bytes(substream);
 	period_bytes = snd_pcm_lib_period_bytes(substream);
 
-	snd_printdd("azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
+	snd_printdd(SFX "azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
 		    bufsize, format_val);
 
 	if (bufsize != azx_dev->bufsize ||
@@ -1830,7 +1885,7 @@ azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
 			  &pcm);
 	if (err < 0)
 		return err;
-	strcpy(pcm->name, cpcm->name);
+	strlcpy(pcm->name, cpcm->name, sizeof(pcm->name));
 	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
 	if (apcm == NULL)
 		return -ENOMEM;
@@ -1973,7 +2028,7 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state)
 	for (i = 0; i < AZX_MAX_PCMS; i++)
 		snd_pcm_suspend_all(chip->pcm[i]);
 	if (chip->initialized)
-		snd_hda_suspend(chip->bus, state);
+		snd_hda_suspend(chip->bus);
 	azx_stop_chip(chip);
 	if (chip->irq >= 0) {
 		free_irq(chip->irq, chip);
@@ -2265,14 +2320,14 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	synchronize_irq(chip->irq);
 
 	gcap = azx_readw(chip, GCAP);
-	snd_printdd("chipset global capabilities = 0x%x\n", gcap);
+	snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap);
 
 	/* ATI chips seems buggy about 64bit DMA addresses */
 	if (chip->driver_type == AZX_DRIVER_ATI)
-		gcap &= ~0x01;
+		gcap &= ~ICH6_GCAP_64OK;
 
 	/* allow 64bit DMA address if supported by H/W */
-	if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+	if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
 		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
 	else {
 		pci_set_dma_mask(pci, DMA_BIT_MASK(32));
@@ -2309,7 +2364,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev),
 				GFP_KERNEL);
 	if (!chip->azx_dev) {
-		snd_printk(KERN_ERR "cannot malloc azx_dev\n");
+		snd_printk(KERN_ERR SFX "cannot malloc azx_dev\n");
 		goto errout;
 	}
 
@@ -2332,11 +2387,9 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 		goto errout;
 	}
 	/* allocate CORB/RIRB */
-	if (!chip->single_cmd) {
-		err = azx_alloc_cmd_io(chip);
-		if (err < 0)
-			goto errout;
-	}
+	err = azx_alloc_cmd_io(chip);
+	if (err < 0)
+		goto errout;
 
 	/* initialize streams */
 	azx_init_stream(chip);
@@ -2359,9 +2412,11 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	}
 
 	strcpy(card->driver, "HDA-Intel");
-	strcpy(card->shortname, driver_short_names[chip->driver_type]);
-	sprintf(card->longname, "%s at 0x%lx irq %i",
-		card->shortname, chip->addr, chip->irq);
+	strlcpy(card->shortname, driver_short_names[chip->driver_type],
+		sizeof(card->shortname));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s at 0x%lx irq %i",
+		 card->shortname, chip->addr, chip->irq);
 
 	*rchip = chip;
 	return 0;
@@ -2514,6 +2569,20 @@ static struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA },
 	/* Teradici */
 	{ PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA },
+	/* Creative X-Fi (CA0110-IBG) */
+#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
+	/* the following entry conflicts with snd-ctxfi driver,
+	 * as ctxfi driver mutates from HD-audio to native mode with
+	 * a special command sequence.
+	 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID),
+	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+	  .class_mask = 0xffffff,
+	  .driver_data = AZX_DRIVER_GENERIC },
+#else
+	/* this entry seems still valid -- i.e. without emu20kx chip */
+	{ PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC },
+#endif
 	/* AMD Generic, PCI class code and Vendor ID for HD Audio */
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
 	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 93d7499350c..418c5d1bada 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -466,8 +466,12 @@ static void print_codec_info(struct snd_info_entry *entry,
 	hda_nid_t nid;
 	int i, nodes;
 
-	snd_iprintf(buffer, "Codec: %s\n",
-		    codec->name ? codec->name : "Not Set");
+	snd_iprintf(buffer, "Codec: ");
+	if (codec->vendor_name && codec->chip_name)
+		snd_iprintf(buffer, "%s %s\n",
+			    codec->vendor_name, codec->chip_name);
+	else
+		snd_iprintf(buffer, "Not Set\n");
 	snd_iprintf(buffer, "Address: %d\n", codec->addr);
 	snd_iprintf(buffer, "Function Id: 0x%x\n", codec->function_id);
 	snd_iprintf(buffer, "Vendor Id: 0x%08x\n", codec->vendor_id);
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
new file mode 100644
index 00000000000..392d108c355
--- /dev/null
+++ b/sound/pci/hda/patch_ca0110.c
@@ -0,0 +1,573 @@
+/*
+ * HD audio interface patch for Creative X-Fi CA0110-IBG chip
+ *
+ * Copyright (c) 2008 Takashi Iwai <tiwai@suse.de>
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <sound/core.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+/*
+ */
+
+struct ca0110_spec {
+	struct auto_pin_cfg autocfg;
+	struct hda_multi_out multiout;
+	hda_nid_t out_pins[AUTO_CFG_MAX_OUTS];
+	hda_nid_t dacs[AUTO_CFG_MAX_OUTS];
+	hda_nid_t hp_dac;
+	hda_nid_t input_pins[AUTO_PIN_LAST];
+	hda_nid_t adcs[AUTO_PIN_LAST];
+	hda_nid_t dig_out;
+	hda_nid_t dig_in;
+	unsigned int num_inputs;
+	const char *input_labels[AUTO_PIN_LAST];
+	struct hda_pcm pcm_rec[2];	/* PCM information */
+};
+
+/*
+ * PCM callbacks
+ */
+static int ca0110_playback_pcm_open(struct hda_pcm_stream *hinfo,
+				    struct hda_codec *codec,
+				    struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
+					     hinfo);
+}
+
+static int ca0110_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       unsigned int stream_tag,
+				       unsigned int format,
+				       struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
+						stream_tag, format, substream);
+}
+
+static int ca0110_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Digital out
+ */
+static int ca0110_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
+}
+
+static int ca0110_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
+					 struct hda_codec *codec,
+					 struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int ca0110_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+					   struct hda_codec *codec,
+					   unsigned int stream_tag,
+					   unsigned int format,
+					   struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+					     format, substream);
+}
+
+/*
+ * Analog capture
+ */
+static int ca0110_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+				      struct hda_codec *codec,
+				      unsigned int stream_tag,
+				      unsigned int format,
+				      struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+
+	snd_hda_codec_setup_stream(codec, spec->adcs[substream->number],
+				   stream_tag, 0, format);
+	return 0;
+}
+
+static int ca0110_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				      struct hda_codec *codec,
+				      struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+
+	snd_hda_codec_cleanup_stream(codec, spec->adcs[substream->number]);
+	return 0;
+}
+
+/*
+ */
+
+static char *dirstr[2] = { "Playback", "Capture" };
+
+static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
+		       int chan, int dir)
+{
+	char namestr[44];
+	int type = dir ? HDA_INPUT : HDA_OUTPUT;
+	struct snd_kcontrol_new knew =
+		HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type);
+	sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
+	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+}
+
+static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
+		       int chan, int dir)
+{
+	char namestr[44];
+	int type = dir ? HDA_INPUT : HDA_OUTPUT;
+	struct snd_kcontrol_new knew =
+		HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type);
+	sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]);
+	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+}
+
+#define add_out_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 0)
+#define add_out_volume(codec, nid, pfx)	_add_volume(codec, nid, pfx, 3, 0)
+#define add_in_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 1)
+#define add_in_volume(codec, nid, pfx)	_add_volume(codec, nid, pfx, 3, 1)
+#define add_mono_switch(codec, nid, pfx, chan) \
+	_add_switch(codec, nid, pfx, chan, 0)
+#define add_mono_volume(codec, nid, pfx, chan) \
+	_add_volume(codec, nid, pfx, chan, 0)
+
+static int ca0110_build_controls(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	static char *prefix[AUTO_CFG_MAX_OUTS] = {
+		"Front", "Surround", NULL, "Side", "Multi"
+	};
+	hda_nid_t mutenid;
+	int i, err;
+
+	for (i = 0; i < spec->multiout.num_dacs; i++) {
+		if (get_wcaps(codec, spec->out_pins[i]) & AC_WCAP_OUT_AMP)
+			mutenid = spec->out_pins[i];
+		else
+			mutenid = spec->multiout.dac_nids[i];
+		if (!prefix[i]) {
+			err = add_mono_switch(codec, mutenid,
+					      "Center", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_switch(codec, mutenid,
+					      "LFE", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_volume(codec, spec->multiout.dac_nids[i],
+					      "Center", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_volume(codec, spec->multiout.dac_nids[i],
+					      "LFE", 1);
+			if (err < 0)
+				return err;
+		} else {
+			err = add_out_switch(codec, mutenid,
+					     prefix[i]);
+			if (err < 0)
+				return err;
+			err = add_out_volume(codec, spec->multiout.dac_nids[i],
+					 prefix[i]);
+			if (err < 0)
+				return err;
+		}
+	}
+	if (cfg->hp_outs) {
+		if (get_wcaps(codec, cfg->hp_pins[0]) & AC_WCAP_OUT_AMP)
+			mutenid = cfg->hp_pins[0];
+		else
+			mutenid = spec->multiout.dac_nids[i];
+
+		err = add_out_switch(codec, mutenid, "Headphone");
+		if (err < 0)
+			return err;
+		if (spec->hp_dac) {
+			err = add_out_volume(codec, spec->hp_dac, "Headphone");
+			if (err < 0)
+				return err;
+		}
+	}
+	for (i = 0; i < spec->num_inputs; i++) {
+		const char *label = spec->input_labels[i];
+		if (get_wcaps(codec, spec->input_pins[i]) & AC_WCAP_IN_AMP)
+			mutenid = spec->input_pins[i];
+		else
+			mutenid = spec->adcs[i];
+		err = add_in_switch(codec, mutenid, label);
+		if (err < 0)
+			return err;
+		err = add_in_volume(codec, spec->adcs[i], label);
+		if (err < 0)
+			return err;
+	}
+
+	if (spec->dig_out) {
+		err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out);
+		if (err < 0)
+			return err;
+		err = snd_hda_create_spdif_share_sw(codec, &spec->multiout);
+		if (err < 0)
+			return err;
+		spec->multiout.share_spdif = 1;
+	}
+	if (spec->dig_in) {
+		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
+		if (err < 0)
+			return err;
+		err = add_in_volume(codec, spec->dig_in, "IEC958");
+	}
+	return 0;
+}
+
+/*
+ */
+static struct hda_pcm_stream ca0110_pcm_analog_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 8,
+	.ops = {
+		.open = ca0110_playback_pcm_open,
+		.prepare = ca0110_playback_pcm_prepare,
+		.cleanup = ca0110_playback_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_analog_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.ops = {
+		.prepare = ca0110_capture_pcm_prepare,
+		.cleanup = ca0110_capture_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_digital_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.ops = {
+		.open = ca0110_dig_playback_pcm_open,
+		.close = ca0110_dig_playback_pcm_close,
+		.prepare = ca0110_dig_playback_pcm_prepare
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_digital_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static int ca0110_build_pcms(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
+
+	codec->pcm_info = info;
+	codec->num_pcms = 0;
+
+	info->name = "CA0110 Analog";
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0110_pcm_analog_playback;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0];
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
+		spec->multiout.max_channels;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0110_pcm_analog_capture;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_inputs;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
+	codec->num_pcms++;
+
+	if (!spec->dig_out && !spec->dig_in)
+		return 0;
+
+	info++;
+	info->name = "CA0110 Digital";
+	info->pcm_type = HDA_PCM_TYPE_SPDIF;
+	if (spec->dig_out) {
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+			ca0110_pcm_digital_playback;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out;
+	}
+	if (spec->dig_in) {
+		info->stream[SNDRV_PCM_STREAM_CAPTURE] =
+			ca0110_pcm_digital_capture;
+		info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
+	}
+	codec->num_pcms++;
+
+	return 0;
+}
+
+static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac)
+{
+	if (pin) {
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+		if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP)
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE,
+					    AMP_OUT_UNMUTE);
+	}
+	if (dac)
+		snd_hda_codec_write(codec, dac, 0,
+				    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO);
+}
+
+static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc)
+{
+	if (pin) {
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80);
+		if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP)
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE,
+					    AMP_IN_UNMUTE(0));
+	}
+	if (adc)
+		snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+				    AMP_IN_UNMUTE(0));
+}
+
+static int ca0110_init(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+
+	for (i = 0; i < spec->multiout.num_dacs; i++)
+		init_output(codec, spec->out_pins[i],
+			    spec->multiout.dac_nids[i]);
+	init_output(codec, cfg->hp_pins[0], spec->hp_dac);
+	init_output(codec, cfg->dig_out_pins[0], spec->dig_out);
+
+	for (i = 0; i < spec->num_inputs; i++)
+		init_input(codec, spec->input_pins[i], spec->adcs[i]);
+	init_input(codec, cfg->dig_in_pin, spec->dig_in);
+	return 0;
+}
+
+static void ca0110_free(struct hda_codec *codec)
+{
+	kfree(codec->spec);
+}
+
+static struct hda_codec_ops ca0110_patch_ops = {
+	.build_controls = ca0110_build_controls,
+	.build_pcms = ca0110_build_pcms,
+	.init = ca0110_init,
+	.free = ca0110_free,
+};
+
+
+static void parse_line_outs(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i, n;
+	unsigned int def_conf;
+	hda_nid_t nid;
+
+	n = 0;
+	for (i = 0; i < cfg->line_outs; i++) {
+		nid = cfg->line_out_pins[i];
+		def_conf = snd_hda_codec_get_pincfg(codec, nid);
+		if (!def_conf)
+			continue; /* invalid pin */
+		if (snd_hda_get_connections(codec, nid, &spec->dacs[i], 1) != 1)
+			continue;
+		spec->out_pins[n++] = nid;
+	}
+	spec->multiout.dac_nids = spec->dacs;
+	spec->multiout.num_dacs = n;
+	spec->multiout.max_channels = n * 2;
+}
+
+static void parse_hp_out(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+	unsigned int def_conf;
+	hda_nid_t nid, dac;
+
+	if (!cfg->hp_outs)
+		return;
+	nid = cfg->hp_pins[0];
+	def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	if (!def_conf) {
+		cfg->hp_outs = 0;
+		return;
+	}
+	if (snd_hda_get_connections(codec, nid, &dac, 1) != 1)
+		return;
+
+	for (i = 0; i < cfg->line_outs; i++)
+		if (dac == spec->dacs[i])
+			break;
+	if (i >= cfg->line_outs) {
+		spec->hp_dac = dac;
+		spec->multiout.hp_nid = dac;
+	}
+}
+
+static void parse_input(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	hda_nid_t nid, pin;
+	int n, i, j;
+
+	n = 0;
+	nid = codec->start_nid;
+	for (i = 0; i < codec->num_nodes; i++, nid++) {
+		unsigned int wcaps = get_wcaps(codec, nid);
+		unsigned int type = (wcaps & AC_WCAP_TYPE) >>
+			AC_WCAP_TYPE_SHIFT;
+		if (type != AC_WID_AUD_IN)
+			continue;
+		if (snd_hda_get_connections(codec, nid, &pin, 1) != 1)
+			continue;
+		if (pin == cfg->dig_in_pin) {
+			spec->dig_in = nid;
+			continue;
+		}
+		for (j = 0; j < AUTO_PIN_LAST; j++)
+			if (cfg->input_pins[j] == pin)
+				break;
+		if (j >= AUTO_PIN_LAST)
+			continue;
+		spec->input_pins[n] = pin;
+		spec->input_labels[n] = auto_pin_cfg_labels[j];
+		spec->adcs[n] = nid;
+		n++;
+	}
+	spec->num_inputs = n;
+}
+
+static void parse_digital(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+
+	if (cfg->dig_outs &&
+	    snd_hda_get_connections(codec, cfg->dig_out_pins[0],
+				    &spec->dig_out, 1) == 1)
+		spec->multiout.dig_out_nid = cfg->dig_out_pins[0];
+}
+
+static int ca0110_parse_auto_config(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	int err;
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+	if (err < 0)
+		return err;
+
+	parse_line_outs(codec);
+	parse_hp_out(codec);
+	parse_digital(codec);
+	parse_input(codec);
+	return 0;
+}
+
+
+int patch_ca0110(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec;
+	int err;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (!spec)
+		return -ENOMEM;
+	codec->spec = spec;
+
+	codec->bus->needs_damn_long_delay = 1;
+
+	err = ca0110_parse_auto_config(codec);
+	if (err < 0)
+		goto error;
+
+	codec->patch_ops = ca0110_patch_ops;
+
+	return 0;
+
+ error:
+	kfree(codec->spec);
+	codec->spec = NULL;
+	return err;
+}
+
+
+/*
+ * patch entries
+ */
+static struct hda_codec_preset snd_hda_preset_ca0110[] = {
+	{ .id = 0x1102000a, .name = "CA0110-IBG", .patch = patch_ca0110 },
+	{ .id = 0x1102000b, .name = "CA0110-IBG", .patch = patch_ca0110 },
+	{ .id = 0x1102000d, .name = "SB0880 X-Fi", .patch = patch_ca0110 },
+	{} /* terminator */
+};
+
+MODULE_ALIAS("snd-hda-codec-id:1102000a");
+MODULE_ALIAS("snd-hda-codec-id:1102000b");
+MODULE_ALIAS("snd-hda-codec-id:1102000d");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Creative CA0110-IBG HD-audio codec");
+
+static struct hda_codec_preset_list ca0110_list = {
+	.preset = snd_hda_preset_ca0110,
+	.owner = THIS_MODULE,
+};
+
+static int __init patch_ca0110_init(void)
+{
+	return snd_hda_add_codec_preset(&ca0110_list);
+}
+
+static void __exit patch_ca0110_exit(void)
+{
+	snd_hda_delete_codec_preset(&ca0110_list);
+}
+
+module_init(patch_ca0110_init)
+module_exit(patch_ca0110_exit)
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index d57d8132a06..f5792e2eea8 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -35,9 +35,28 @@ struct nvhdmi_spec {
 	struct hda_pcm pcm_rec;
 };
 
+#define Nv_VERB_SET_Channel_Allocation          0xF79
+#define Nv_VERB_SET_Info_Frame_Checksum         0xF7A
+#define Nv_VERB_SET_Audio_Protection_On         0xF98
+#define Nv_VERB_SET_Audio_Protection_Off        0xF99
+
+#define Nv_Master_Convert_nid   0x04
+#define Nv_Master_Pin_nid       0x05
+
+static hda_nid_t nvhdmi_convert_nids[4] = {
+	/*front, rear, clfe, rear_surr */
+	0x6, 0x8, 0xa, 0xc,
+};
+
 static struct hda_verb nvhdmi_basic_init[] = {
+	/* set audio protect on */
+	{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
 	/* enable digital output on pin widget */
-	{ 0x05, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x5, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0x7, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0x9, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0xb, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0xd, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
 	{} /* terminator */
 };
 
@@ -66,48 +85,205 @@ static int nvhdmi_init(struct hda_codec *codec)
  * Digital out
  */
 static int nvhdmi_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
-				     struct hda_codec *codec,
-				     struct snd_pcm_substream *substream)
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
-				      struct hda_codec *codec,
-				      struct snd_pcm_substream *substream)
+static int nvhdmi_dig_playback_pcm_close_8ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
+	int i;
+
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid,
+			0, AC_VERB_SET_CHANNEL_STREAMID, 0);
+	for (i = 0; i < 4; i++) {
+		/* set the stream id */
+		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+				AC_VERB_SET_CHANNEL_STREAMID, 0);
+		/* set the stream format */
+		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+				AC_VERB_SET_STREAM_FORMAT, 0);
+	}
+
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
-					    struct hda_codec *codec,
-					    unsigned int stream_tag,
-					    unsigned int format,
-					    struct snd_pcm_substream *substream)
+static int nvhdmi_dig_playback_pcm_close_2ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct nvhdmi_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
+{
+	int chs;
+	unsigned int dataDCC1, dataDCC2, chan, chanmask, channel_id;
+	int i;
+
+	mutex_lock(&codec->spdif_mutex);
+
+	chs = substream->runtime->channels;
+	chan = chs ? (chs - 1) : 1;
+
+	switch (chs) {
+	default:
+	case 0:
+	case 2:
+		chanmask = 0x00;
+		break;
+	case 4:
+		chanmask = 0x08;
+		break;
+	case 6:
+		chanmask = 0x0b;
+		break;
+	case 8:
+		chanmask = 0x13;
+		break;
+	}
+	dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT;
+	dataDCC2 = 0x2;
+
+	/* set the Audio InforFrame Channel Allocation */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Channel_Allocation, chanmask);
+
+	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
+	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+
+	/* set the stream id */
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+			AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0);
+
+	/* set the stream format */
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+			AC_VERB_SET_STREAM_FORMAT, format);
+
+	/* turn on again (if needed) */
+	/* enable and set the channel status audio/data flag */
+	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & 0xff);
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
+	}
+
+	for (i = 0; i < 4; i++) {
+		if (chs == 2)
+			channel_id = 0;
+		else
+			channel_id = i * 2;
+
+		/* turn off SPDIF once;
+		 *otherwise the IEC958 bits won't be updated
+		 */
+		if (codec->spdif_status_reset &&
+		(codec->spdif_ctls & AC_DIG1_ENABLE))
+			snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+		/* set the stream id */
+		snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_CHANNEL_STREAMID,
+				(stream_tag << 4) | channel_id);
+		/* set the stream format */
+		snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_STREAM_FORMAT,
+				format);
+		/* turn on again (if needed) */
+		/* enable and set the channel status audio/data flag */
+		if (codec->spdif_status_reset &&
+		(codec->spdif_ctls & AC_DIG1_ENABLE)) {
+			snd_hda_codec_write(codec,
+					nvhdmi_convert_nids[i],
+					0,
+					AC_VERB_SET_DIGI_CONVERT_1,
+					codec->spdif_ctls & 0xff);
+			snd_hda_codec_write(codec,
+					nvhdmi_convert_nids[i],
+					0,
+					AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
+		}
+	}
+
+	/* set the Audio Info Frame Checksum */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Info_Frame_Checksum,
+			(0x71 - chan - chanmask));
+
+	mutex_unlock(&codec->spdif_mutex);
+	return 0;
+}
+
+static int nvhdmi_dig_playback_pcm_prepare_2ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
-					     format, substream);
+					format, substream);
 }
 
-static struct hda_pcm_stream nvhdmi_pcm_digital_playback = {
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 8,
+	.nid = Nv_Master_Convert_nid,
+	.rates = SNDRV_PCM_RATE_48000,
+	.maxbps = 16,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.ops = {
+		.open = nvhdmi_dig_playback_pcm_open,
+		.close = nvhdmi_dig_playback_pcm_close_8ch,
+		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch
+	},
+};
+
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = {
 	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
-	.nid = 0x4, /* NID to query formats and rates and setup streams */
+	.nid = Nv_Master_Convert_nid,
 	.rates = SNDRV_PCM_RATE_48000,
 	.maxbps = 16,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
-		.close = nvhdmi_dig_playback_pcm_close,
-		.prepare = nvhdmi_dig_playback_pcm_prepare
+		.close = nvhdmi_dig_playback_pcm_close_2ch,
+		.prepare = nvhdmi_dig_playback_pcm_prepare_2ch
 	},
 };
 
-static int nvhdmi_build_pcms(struct hda_codec *codec)
+static int nvhdmi_build_pcms_8ch(struct hda_codec *codec)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	struct hda_pcm *info = &spec->pcm_rec;
@@ -117,7 +293,24 @@ static int nvhdmi_build_pcms(struct hda_codec *codec)
 
 	info->name = "NVIDIA HDMI";
 	info->pcm_type = HDA_PCM_TYPE_HDMI;
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = nvhdmi_pcm_digital_playback;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_8ch;
+
+	return 0;
+}
+
+static int nvhdmi_build_pcms_2ch(struct hda_codec *codec)
+{
+	struct nvhdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = &spec->pcm_rec;
+
+	codec->num_pcms = 1;
+	codec->pcm_info = info;
+
+	info->name = "NVIDIA HDMI";
+	info->pcm_type = HDA_PCM_TYPE_HDMI;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_2ch;
 
 	return 0;
 }
@@ -127,14 +320,40 @@ static void nvhdmi_free(struct hda_codec *codec)
 	kfree(codec->spec);
 }
 
-static struct hda_codec_ops nvhdmi_patch_ops = {
+static struct hda_codec_ops nvhdmi_patch_ops_8ch = {
+	.build_controls = nvhdmi_build_controls,
+	.build_pcms = nvhdmi_build_pcms_8ch,
+	.init = nvhdmi_init,
+	.free = nvhdmi_free,
+};
+
+static struct hda_codec_ops nvhdmi_patch_ops_2ch = {
 	.build_controls = nvhdmi_build_controls,
-	.build_pcms = nvhdmi_build_pcms,
+	.build_pcms = nvhdmi_build_pcms_2ch,
 	.init = nvhdmi_init,
 	.free = nvhdmi_free,
 };
 
-static int patch_nvhdmi(struct hda_codec *codec)
+static int patch_nvhdmi_8ch(struct hda_codec *codec)
+{
+	struct nvhdmi_spec *spec;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	spec->multiout.num_dacs = 0;  /* no analog */
+	spec->multiout.max_channels = 8;
+	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+
+	codec->patch_ops = nvhdmi_patch_ops_8ch;
+
+	return 0;
+}
+
+static int patch_nvhdmi_2ch(struct hda_codec *codec)
 {
 	struct nvhdmi_spec *spec;
 
@@ -144,13 +363,11 @@ static int patch_nvhdmi(struct hda_codec *codec)
 
 	codec->spec = spec;
 
-	spec->multiout.num_dacs = 0;	  /* no analog */
+	spec->multiout.num_dacs = 0;  /* no analog */
 	spec->multiout.max_channels = 2;
-	spec->multiout.dig_out_nid = 0x4; /* NID for copying analog to digital,
-					   * seems to be unused in pure-digital
-					   * case. */
+	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
 
-	codec->patch_ops = nvhdmi_patch_ops;
+	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
 	return 0;
 }
@@ -159,11 +376,11 @@ static int patch_nvhdmi(struct hda_codec *codec)
  * patch entries
  */
 static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
-	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi },
+	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
+	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
 	{} /* terminator */
 };
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0fd258eba3a..d22b2606801 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -190,6 +190,7 @@ enum {
 	ALC663_ASUS_MODE6,
 	ALC272_DELL,
 	ALC272_DELL_ZM1,
+	ALC272_SAMSUNG_NC10,
 	ALC662_AUTO,
 	ALC662_MODEL_LAST,
 };
@@ -205,6 +206,7 @@ enum {
 	ALC882_ASUS_A7M,
 	ALC885_MACPRO,
 	ALC885_MBP3,
+	ALC885_MB5,
 	ALC885_IMAC24,
 	ALC882_AUTO,
 	ALC882_MODEL_LAST,
@@ -218,9 +220,11 @@ enum {
 	ALC883_6ST_DIG,
 	ALC883_TARGA_DIG,
 	ALC883_TARGA_2ch_DIG,
+	ALC883_TARGA_8ch_DIG,
 	ALC883_ACER,
 	ALC883_ACER_ASPIRE,
 	ALC888_ACER_ASPIRE_4930G,
+	ALC888_ACER_ASPIRE_8930G,
 	ALC883_MEDION,
 	ALC883_MEDION_MD2,
 	ALC883_LAPTOP_EAPD,
@@ -238,7 +242,9 @@ enum {
 	ALC883_3ST_6ch_INTEL,
 	ALC888_ASUS_M90V,
 	ALC888_ASUS_EEE1601,
+	ALC889A_MB31,
 	ALC1200_ASUS_P5Q,
+	ALC883_SONY_VAIO_TT,
 	ALC883_AUTO,
 	ALC883_MODEL_LAST,
 };
@@ -253,6 +259,15 @@ enum {
 /* for GPIO Poll */
 #define GPIO_MASK	0x03
 
+/* extra amp-initialization sequence types */
+enum {
+	ALC_INIT_NONE,
+	ALC_INIT_DEFAULT,
+	ALC_INIT_GPIO1,
+	ALC_INIT_GPIO2,
+	ALC_INIT_GPIO3,
+};
+
 struct alc_spec {
 	/* codec parameterization */
 	struct snd_kcontrol_new *mixers[5];	/* mixer arrays */
@@ -266,13 +281,13 @@ struct alc_spec {
 						 */
 	unsigned int num_init_verbs;
 
-	char *stream_name_analog;	/* analog PCM stream */
+	char stream_name_analog[16];	/* analog PCM stream */
 	struct hda_pcm_stream *stream_analog_playback;
 	struct hda_pcm_stream *stream_analog_capture;
 	struct hda_pcm_stream *stream_analog_alt_playback;
 	struct hda_pcm_stream *stream_analog_alt_capture;
 
-	char *stream_name_digital;	/* digital PCM stream */
+	char stream_name_digital[16];	/* digital PCM stream */
 	struct hda_pcm_stream *stream_digital_playback;
 	struct hda_pcm_stream *stream_digital_capture;
 
@@ -301,6 +316,8 @@ struct alc_spec {
 	const struct hda_channel_mode *channel_mode;
 	int num_channel_mode;
 	int need_dac_fix;
+	int const_channel_count;
+	int ext_channel_count;
 
 	/* PCM information */
 	struct hda_pcm pcm_rec[3];	/* used in alc_build_pcms() */
@@ -322,6 +339,7 @@ struct alc_spec {
 
 	/* other flags */
 	unsigned int no_analog :1; /* digital I/O only */
+	int init_amp;
 
 	/* for virtual master */
 	hda_nid_t vmaster_nid;
@@ -355,6 +373,7 @@ struct alc_config_preset {
 	unsigned int num_channel_mode;
 	const struct hda_channel_mode *channel_mode;
 	int need_dac_fix;
+	int const_channel_count;
 	unsigned int num_mux_defs;
 	const struct hda_input_mux *input_mux;
 	void (*unsol_event)(struct hda_codec *, unsigned int);
@@ -449,7 +468,7 @@ static int alc_ch_mode_get(struct snd_kcontrol *kcontrol,
 	struct alc_spec *spec = codec->spec;
 	return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
 				   spec->num_channel_mode,
-				   spec->multiout.max_channels);
+				   spec->ext_channel_count);
 }
 
 static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
@@ -459,9 +478,12 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
 	struct alc_spec *spec = codec->spec;
 	int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
 				      spec->num_channel_mode,
-				      &spec->multiout.max_channels);
-	if (err >= 0 && spec->need_dac_fix)
-		spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+				      &spec->ext_channel_count);
+	if (err >= 0 && !spec->const_channel_count) {
+		spec->multiout.max_channels = spec->ext_channel_count;
+		if (spec->need_dac_fix)
+			spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+	}
 	return err;
 }
 
@@ -841,8 +863,13 @@ static void setup_preset(struct alc_spec *spec,
 	spec->channel_mode = preset->channel_mode;
 	spec->num_channel_mode = preset->num_channel_mode;
 	spec->need_dac_fix = preset->need_dac_fix;
+	spec->const_channel_count = preset->const_channel_count;
 
-	spec->multiout.max_channels = spec->channel_mode[0].channels;
+	if (preset->const_channel_count)
+		spec->multiout.max_channels = preset->const_channel_count;
+	else
+		spec->multiout.max_channels = spec->channel_mode[0].channels;
+	spec->ext_channel_count = spec->channel_mode[0].channels;
 
 	spec->multiout.num_dacs = preset->num_dacs;
 	spec->multiout.dac_nids = preset->dac_nids;
@@ -921,20 +948,26 @@ static void alc_fix_pll_init(struct hda_codec *codec, hda_nid_t nid,
 	alc_fix_pll(codec);
 }
 
-static void alc_sku_automute(struct hda_codec *codec)
+static void alc_automute_pin(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	unsigned int present;
-	unsigned int hp_nid = spec->autocfg.hp_pins[0];
-	unsigned int sp_nid = spec->autocfg.speaker_pins[0];
+	unsigned int nid = spec->autocfg.hp_pins[0];
+	int i;
 
 	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, hp_nid, 0,
+	snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, nid, 0,
 				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
-	snd_hda_codec_write(codec, sp_nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    spec->jack_present ? 0 : PIN_OUT);
+	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+		nid = spec->autocfg.speaker_pins[i];
+		if (!nid)
+			break;
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    spec->jack_present ? 0 : PIN_OUT);
+	}
 }
 
 #if 0 /* it's broken in some acses -- temporarily disabled */
@@ -969,16 +1002,19 @@ static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res)
 		res >>= 28;
 	else
 		res >>= 26;
-	if (res == ALC880_HP_EVENT)
-		alc_sku_automute(codec);
-
-	if (res == ALC880_MIC_EVENT)
+	switch (res) {
+	case ALC880_HP_EVENT:
+		alc_automute_pin(codec);
+		break;
+	case ALC880_MIC_EVENT:
 		alc_mic_automute(codec);
+		break;
+	}
 }
 
 static void alc_inithook(struct hda_codec *codec)
 {
-	alc_sku_automute(codec);
+	alc_automute_pin(codec);
 	alc_mic_automute(codec);
 }
 
@@ -1000,69 +1036,21 @@ static void alc888_coef_init(struct hda_codec *codec)
 				    AC_VERB_SET_PROC_COEF, 0x3030);
 }
 
-/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
- *	31 ~ 16 :	Manufacture ID
- *	15 ~ 8	:	SKU ID
- *	7  ~ 0	:	Assembly ID
- *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
- */
-static void alc_subsystem_id(struct hda_codec *codec,
-			     unsigned int porta, unsigned int porte,
-			     unsigned int portd)
+static void alc_auto_init_amp(struct hda_codec *codec, int type)
 {
-	unsigned int ass, tmp, i;
-	unsigned nid;
-	struct alc_spec *spec = codec->spec;
-
-	ass = codec->subsystem_id & 0xffff;
-	if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
-		goto do_sku;
-
-	/*
-	 * 31~30	: port conetcivity
-	 * 29~21	: reserve
-	 * 20		: PCBEEP input
-	 * 19~16	: Check sum (15:1)
-	 * 15~1		: Custom
-	 * 0		: override
-	*/
-	nid = 0x1d;
-	if (codec->vendor_id == 0x10ec0260)
-		nid = 0x17;
-	ass = snd_hda_codec_get_pincfg(codec, nid);
-	if (!(ass & 1) && !(ass & 0x100000))
-		return;
-	if ((ass >> 30) != 1)	/* no physical connection */
-		return;
+	unsigned int tmp;
 
-	/* check sum */
-	tmp = 0;
-	for (i = 1; i < 16; i++) {
-		if ((ass >> i) & 1)
-			tmp++;
-	}
-	if (((ass >> 16) & 0xf) != tmp)
-		return;
-do_sku:
-	/*
-	 * 0 : override
-	 * 1 :	Swap Jack
-	 * 2 : 0 --> Desktop, 1 --> Laptop
-	 * 3~5 : External Amplifier control
-	 * 7~6 : Reserved
-	*/
-	tmp = (ass & 0x38) >> 3;	/* external Amp control */
-	switch (tmp) {
-	case 1:
+	switch (type) {
+	case ALC_INIT_GPIO1:
 		snd_hda_sequence_write(codec, alc_gpio1_init_verbs);
 		break;
-	case 3:
+	case ALC_INIT_GPIO2:
 		snd_hda_sequence_write(codec, alc_gpio2_init_verbs);
 		break;
-	case 7:
+	case ALC_INIT_GPIO3:
 		snd_hda_sequence_write(codec, alc_gpio3_init_verbs);
 		break;
-	case 5:	/* set EAPD output high */
+	case ALC_INIT_DEFAULT:
 		switch (codec->vendor_id) {
 		case 0x10ec0260:
 			snd_hda_codec_write(codec, 0x0f, 0,
@@ -1116,7 +1104,7 @@ do_sku:
 					    tmp | 0x2010);
 			break;
 		case 0x10ec0888:
-			/*alc888_coef_init(codec);*/ /* called in alc_init() */
+			alc888_coef_init(codec);
 			break;
 		case 0x10ec0267:
 		case 0x10ec0268:
@@ -1131,7 +1119,107 @@ do_sku:
 					    tmp | 0x3000);
 			break;
 		}
-	default:
+		break;
+	}
+}
+
+static void alc_init_auto_hp(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (!spec->autocfg.hp_pins[0])
+		return;
+
+	if (!spec->autocfg.speaker_pins[0]) {
+		if (spec->autocfg.line_out_pins[0] &&
+		    spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT)
+			spec->autocfg.speaker_pins[0] =
+				spec->autocfg.line_out_pins[0];
+		else
+			return;
+	}
+
+	snd_printdd("realtek: Enable HP auto-muting on NID 0x%x\n",
+		    spec->autocfg.hp_pins[0]);
+	snd_hda_codec_write_cache(codec, spec->autocfg.hp_pins[0], 0,
+				  AC_VERB_SET_UNSOLICITED_ENABLE,
+				  AC_USRSP_EN | ALC880_HP_EVENT);
+	spec->unsol_event = alc_sku_unsol_event;
+}
+
+/* check subsystem ID and set up device-specific initialization;
+ * return 1 if initialized, 0 if invalid SSID
+ */
+/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
+ *	31 ~ 16 :	Manufacture ID
+ *	15 ~ 8	:	SKU ID
+ *	7  ~ 0	:	Assembly ID
+ *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
+ */
+static int alc_subsystem_id(struct hda_codec *codec,
+			    hda_nid_t porta, hda_nid_t porte,
+			    hda_nid_t portd)
+{
+	unsigned int ass, tmp, i;
+	unsigned nid;
+	struct alc_spec *spec = codec->spec;
+
+	ass = codec->subsystem_id & 0xffff;
+	if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
+		goto do_sku;
+
+	/* invalid SSID, check the special NID pin defcfg instead */
+	/*
+	 * 31~30	: port conetcivity
+	 * 29~21	: reserve
+	 * 20		: PCBEEP input
+	 * 19~16	: Check sum (15:1)
+	 * 15~1		: Custom
+	 * 0		: override
+	*/
+	nid = 0x1d;
+	if (codec->vendor_id == 0x10ec0260)
+		nid = 0x17;
+	ass = snd_hda_codec_get_pincfg(codec, nid);
+	snd_printd("realtek: No valid SSID, "
+		   "checking pincfg 0x%08x for NID 0x%x\n",
+		   ass, nid);
+	if (!(ass & 1) && !(ass & 0x100000))
+		return 0;
+	if ((ass >> 30) != 1)	/* no physical connection */
+		return 0;
+
+	/* check sum */
+	tmp = 0;
+	for (i = 1; i < 16; i++) {
+		if ((ass >> i) & 1)
+			tmp++;
+	}
+	if (((ass >> 16) & 0xf) != tmp)
+		return 0;
+do_sku:
+	snd_printd("realtek: Enabling init ASM_ID=0x%04x CODEC_ID=%08x\n",
+		   ass & 0xffff, codec->vendor_id);
+	/*
+	 * 0 : override
+	 * 1 :	Swap Jack
+	 * 2 : 0 --> Desktop, 1 --> Laptop
+	 * 3~5 : External Amplifier control
+	 * 7~6 : Reserved
+	*/
+	tmp = (ass & 0x38) >> 3;	/* external Amp control */
+	switch (tmp) {
+	case 1:
+		spec->init_amp = ALC_INIT_GPIO1;
+		break;
+	case 3:
+		spec->init_amp = ALC_INIT_GPIO2;
+		break;
+	case 7:
+		spec->init_amp = ALC_INIT_GPIO3;
+		break;
+	case 5:
+		spec->init_amp = ALC_INIT_DEFAULT;
 		break;
 	}
 
@@ -1139,7 +1227,7 @@ do_sku:
 	 * when the external headphone out jack is plugged"
 	 */
 	if (!(ass & 0x8000))
-		return;
+		return 1;
 	/*
 	 * 10~8 : Jack location
 	 * 12~11: Headphone out -> 00: PortA, 01: PortE, 02: PortD, 03: Resvered
@@ -1147,14 +1235,6 @@ do_sku:
 	 * 15   : 1 --> enable the function "Mute internal speaker
 	 *	        when the external headphone out jack is plugged"
 	 */
-	if (!spec->autocfg.speaker_pins[0]) {
-		if (spec->autocfg.line_out_pins[0])
-			spec->autocfg.speaker_pins[0] =
-				spec->autocfg.line_out_pins[0];
-		else
-			return;
-	}
-
 	if (!spec->autocfg.hp_pins[0]) {
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
 		if (tmp == 0)
@@ -1164,23 +1244,23 @@ do_sku:
 		else if (tmp == 2)
 			spec->autocfg.hp_pins[0] = portd;
 		else
-			return;
+			return 1;
 	}
-	if (spec->autocfg.hp_pins[0])
-		snd_hda_codec_write(codec, spec->autocfg.hp_pins[0], 0,
-			AC_VERB_SET_UNSOLICITED_ENABLE,
-			AC_USRSP_EN | ALC880_HP_EVENT);
 
-#if 0 /* it's broken in some acses -- temporarily disabled */
-	if (spec->autocfg.input_pins[AUTO_PIN_MIC] &&
-		spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC])
-		snd_hda_codec_write(codec,
-			spec->autocfg.input_pins[AUTO_PIN_MIC], 0,
-			AC_VERB_SET_UNSOLICITED_ENABLE,
-			AC_USRSP_EN | ALC880_MIC_EVENT);
-#endif /* disabled */
+	alc_init_auto_hp(codec);
+	return 1;
+}
 
-	spec->unsol_event = alc_sku_unsol_event;
+static void alc_ssid_check(struct hda_codec *codec,
+			   hda_nid_t porta, hda_nid_t porte, hda_nid_t portd)
+{
+	if (!alc_subsystem_id(codec, porta, porte, portd)) {
+		struct alc_spec *spec = codec->spec;
+		snd_printd("realtek: "
+			   "Enable default setup for auto mode as fallback\n");
+		spec->init_amp = ALC_INIT_DEFAULT;
+		alc_init_auto_hp(codec);
+	}
 }
 
 /*
@@ -1315,32 +1395,58 @@ static struct hda_verb alc888_fujitsu_xa3530_verbs[] = {
 	{}
 };
 
-static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec)
+static void alc_automute_amp(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int bits;
-	/* Line out presence */
-	present = snd_hda_codec_read(codec, 0x17, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	/* HP out presence */
-	present = present || snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
+	struct alc_spec *spec = codec->spec;
+	unsigned int val, mute;
+	hda_nid_t nid;
+	int i;
+
+	spec->jack_present = 0;
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) {
+		nid = spec->autocfg.hp_pins[i];
+		if (!nid)
+			break;
+		val = snd_hda_codec_read(codec, nid, 0,
+					 AC_VERB_GET_PIN_SENSE, 0);
+		if (val & AC_PINSENSE_PRESENCE) {
+			spec->jack_present = 1;
+			break;
+		}
+	}
+
+	mute = spec->jack_present ? HDA_AMP_MUTE : 0;
 	/* Toggle internal speakers muting */
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	/* Toggle internal bass muting */
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+		nid = spec->autocfg.speaker_pins[i];
+		if (!nid)
+			break;
+		snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+	}
 }
 
-static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec,
-		unsigned int res)
+static void alc_automute_amp_unsol_event(struct hda_codec *codec,
+					 unsigned int res)
 {
-	if (res >> 26 == ALC880_HP_EVENT)
-		alc888_fujitsu_xa3530_automute(codec);
+	if (codec->vendor_id == 0x10ec0880)
+		res >>= 28;
+	else
+		res >>= 26;
+	if (res == ALC880_HP_EVENT)
+		alc_automute_amp(codec);
 }
 
+static void alc888_fujitsu_xa3530_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x17; /* line-out */
+	spec->autocfg.hp_pins[1] = 0x1b; /* hp */
+	spec->autocfg.speaker_pins[0] = 0x14; /* speaker */
+	spec->autocfg.speaker_pins[1] = 0x15; /* bass */
+	alc_automute_amp(codec);
+}
 
 /*
  * ALC888 Acer Aspire 4930G model
@@ -1364,6 +1470,59 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = {
 	{ }
 };
 
+/*
+ * ALC889 Acer Aspire 8930G model
+ */
+
+static struct hda_verb alc889_acer_aspire_8930g_verbs[] = {
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Connect Internal Front to Front */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Connect Internal Rear to Rear */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect Internal CLFE to CLFE */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect HP out to Front */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Enable all DACs */
+/*  DAC DISABLE/MUTE 1? */
+/*  setting bits 1-5 disables DAC nids 0x02-0x06 apparently. Init=0x38 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x03},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0000},
+/*  DAC DISABLE/MUTE 2? */
+/*  some bit here disables the other DACs. Init=0x4900 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x08},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0000},
+/* Enable amplifiers */
+	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+	{0x15, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+/* DMIC fix
+ * This laptop has a stereo digital microphone. The mics are only 1cm apart
+ * which makes the stereo useless. However, either the mic or the ALC889
+ * makes the signal become a difference/sum signal instead of standard
+ * stereo, which is annoying. So instead we flip this bit which makes the
+ * codec replicate the sum signal to both channels, turning it into a
+ * normal mono mic.
+ */
+/*  DMIC_CONTROL? Init value = 0x0001 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x0b},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0003},
+	{ }
+};
+
 static struct hda_input_mux alc888_2_capture_sources[2] = {
 	/* Front mic only available on one ADC */
 	{
@@ -1385,6 +1544,38 @@ static struct hda_input_mux alc888_2_capture_sources[2] = {
 	}
 };
 
+static struct hda_input_mux alc889_capture_sources[3] = {
+	/* Digital mic only available on first "ADC" */
+	{
+		.num_items = 5,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Front Mic", 0xb },
+			{ "Input Mix", 0xa },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
+		},
+	}
+};
+
 static struct snd_kcontrol_new alc888_base_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -1407,22 +1598,24 @@ static struct snd_kcontrol_new alc888_base_mixer[] = {
 	{ } /* end */
 };
 
-static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec)
+static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int bits;
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
-static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec,
-		unsigned int res)
+static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
 {
-	if (res >> 26 == ALC880_HP_EVENT)
-		alc888_acer_aspire_4930g_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x1b;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -2390,21 +2583,6 @@ static struct hda_verb alc880_beep_init_verbs[] = {
 	{ }
 };
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc880_uniwill_hp_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
 /* auto-toggle front mic */
 static void alc880_uniwill_mic_automute(struct hda_codec *codec)
 {
@@ -2417,9 +2595,14 @@ static void alc880_uniwill_mic_automute(struct hda_codec *codec)
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
 }
 
-static void alc880_uniwill_automute(struct hda_codec *codec)
+static void alc880_uniwill_init_hook(struct hda_codec *codec)
 {
-	alc880_uniwill_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x16;
+	alc_automute_amp(codec);
 	alc880_uniwill_mic_automute(codec);
 }
 
@@ -2430,24 +2613,22 @@ static void alc880_uniwill_unsol_event(struct hda_codec *codec,
 	 * definition.  4bit tag is placed at 28 bit!
 	 */
 	switch (res >> 28) {
-	case ALC880_HP_EVENT:
-		alc880_uniwill_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc880_uniwill_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
-static void alc880_uniwill_p53_hp_automute(struct hda_codec *codec)
+static void alc880_uniwill_p53_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, HDA_AMP_MUTE, bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
 static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
@@ -2469,10 +2650,10 @@ static void alc880_uniwill_p53_unsol_event(struct hda_codec *codec,
 	/* Looks like the unsol event is incompatible with the standard
 	 * definition.  4bit tag is placed at 28 bit!
 	 */
-	if ((res >> 28) == ALC880_HP_EVENT)
-		alc880_uniwill_p53_hp_automute(codec);
 	if ((res >> 28) == ALC880_DCVOL_EVENT)
 		alc880_uniwill_p53_dcvol_automute(codec);
+	else
+		alc_automute_amp_unsol_event(codec, res);
 }
 
 /*
@@ -2542,6 +2723,7 @@ static struct hda_verb alc880_pin_asus_init_verbs[] = {
 /* Enable GPIO mask and set output */
 #define alc880_gpio1_init_verbs	alc_gpio1_init_verbs
 #define alc880_gpio2_init_verbs	alc_gpio2_init_verbs
+#define alc880_gpio3_init_verbs	alc_gpio3_init_verbs
 
 /* Clevo m520g init */
 static struct hda_verb alc880_pin_clevo_init_verbs[] = {
@@ -2704,30 +2886,18 @@ static struct hda_verb alc880_lg_init_verbs[] = {
 	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{ }
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_automute(struct hda_codec *codec)
+static void alc880_lg_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	if ((res >> 28) == 0x01)
-		alc880_lg_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -2801,30 +2971,18 @@ static struct hda_verb alc880_lg_lw_init_verbs[] = {
 	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{ }
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_lw_automute(struct hda_codec *codec)
+static void alc880_lg_lw_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
-static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	if ((res >> 28) == 0x01)
-		alc880_lg_lw_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 static struct snd_kcontrol_new alc880_medion_rim_mixer[] = {
@@ -2871,16 +3029,10 @@ static struct hda_verb alc880_medion_rim_init_verbs[] = {
 /* toggle speaker-output according to the hp-jack state */
 static void alc880_medion_rim_automute(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	if (present)
+	struct alc_spec *spec = codec->spec;
+	alc_automute_amp(codec);
+	/* toggle EAPD */
+	if (spec->jack_present)
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0);
 	else
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 2);
@@ -2896,6 +3048,15 @@ static void alc880_medion_rim_unsol_event(struct hda_codec *codec,
 		alc880_medion_rim_automute(codec);
 }
 
+static void alc880_medion_rim_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc880_medion_rim_automute(codec);
+}
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 static struct hda_amp_list alc880_loopbacks[] = {
 	{ 0x0b, HDA_INPUT, 0 },
@@ -2924,8 +3085,7 @@ static int alc_init(struct hda_codec *codec)
 	unsigned int i;
 
 	alc_fix_pll(codec);
-	if (codec->vendor_id == 0x10ec0888)
-		alc888_coef_init(codec);
+	alc_auto_init_amp(codec, spec->init_amp);
 
 	for (i = 0; i < spec->num_init_verbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
@@ -3127,7 +3287,10 @@ static int alc_build_pcms(struct hda_codec *codec)
 	if (spec->no_analog)
 		goto skip_analog;
 
+	snprintf(spec->stream_name_analog, sizeof(spec->stream_name_analog),
+		 "%s Analog", codec->chip_name);
 	info->name = spec->stream_name_analog;
+	
 	if (spec->stream_analog_playback) {
 		if (snd_BUG_ON(!spec->multiout.dac_nids))
 			return -EINVAL;
@@ -3153,6 +3316,9 @@ static int alc_build_pcms(struct hda_codec *codec)
  skip_analog:
 	/* SPDIF for stream index #1 */
 	if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
+		snprintf(spec->stream_name_digital,
+			 sizeof(spec->stream_name_digital),
+			 "%s Digital", codec->chip_name);
 		codec->num_pcms = 2;
 	        codec->slave_dig_outs = spec->multiout.slave_dig_outs;
 		info = spec->pcm_rec + 1;
@@ -3755,7 +3921,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_f1734_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_ASUS] = {
 		.mixers = { alc880_asus_mixer },
@@ -3832,7 +3998,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.need_dac_fix = 1,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_unsol_event,
-		.init_hook = alc880_uniwill_automute,
+		.init_hook = alc880_uniwill_init_hook,
 	},
 	[ALC880_UNIWILL_P53] = {
 		.mixers = { alc880_uniwill_p53_mixer },
@@ -3844,7 +4010,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_threestack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_FUJITSU] = {
 		.mixers = { alc880_fujitsu_mixer },
@@ -3858,7 +4024,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_CLEVO] = {
 		.mixers = { alc880_three_stack_mixer },
@@ -3883,8 +4049,8 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_lg_ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc880_lg_capture_source,
-		.unsol_event = alc880_lg_unsol_event,
-		.init_hook = alc880_lg_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc880_lg_init_hook,
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 		.loopbacks = alc880_lg_loopbacks,
 #endif
@@ -3899,8 +4065,8 @@ static struct alc_config_preset alc880_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc880_lg_lw_modes),
 		.channel_mode = alc880_lg_lw_modes,
 		.input_mux = &alc880_lg_lw_capture_source,
-		.unsol_event = alc880_lg_lw_unsol_event,
-		.init_hook = alc880_lg_lw_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc880_lg_lw_init_hook,
 	},
 	[ALC880_MEDION_RIM] = {
 		.mixers = { alc880_medion_rim_mixer },
@@ -3914,7 +4080,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_medion_rim_capture_source,
 		.unsol_event = alc880_medion_rim_unsol_event,
-		.init_hook = alc880_medion_rim_automute,
+		.init_hook = alc880_medion_rim_init_hook,
 	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC880_TEST] = {
@@ -4199,7 +4365,6 @@ static void alc880_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i < spec->autocfg.line_outs; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -4304,6 +4469,8 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -4361,8 +4528,8 @@ static int patch_alc880(struct hda_codec *codec)
 						  alc880_models,
 						  alc880_cfg_tbl);
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC880, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC880_AUTO;
 	}
 
@@ -4389,12 +4556,10 @@ static int patch_alc880(struct hda_codec *codec)
 	if (board_config != ALC880_AUTO)
 		setup_preset(spec, &alc880_presets[board_config]);
 
-	spec->stream_name_analog = "ALC880 Analog";
 	spec->stream_analog_playback = &alc880_pcm_analog_playback;
 	spec->stream_analog_capture = &alc880_pcm_analog_capture;
 	spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
 
-	spec->stream_name_digital = "ALC880 Digital";
 	spec->stream_digital_playback = &alc880_pcm_digital_playback;
 	spec->stream_digital_capture = &alc880_pcm_digital_capture;
 
@@ -5679,7 +5844,6 @@ static void alc260_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	hda_nid_t nid;
 
-	alc_subsystem_id(codec, 0x10, 0x15, 0x0f);
 	nid = spec->autocfg.line_out_pins[0];
 	if (nid) {
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -5789,6 +5953,8 @@ static int alc260_parse_auto_config(struct hda_codec *codec)
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
 
+	alc_ssid_check(codec, 0x10, 0x15, 0x0f);
+
 	return 1;
 }
 
@@ -6006,8 +6172,9 @@ static int patch_alc260(struct hda_codec *codec)
 						  alc260_models,
 						  alc260_cfg_tbl);
 	if (board_config < 0) {
-		snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260, "
-			   "trying auto-probe from BIOS...\n");
+		snd_printd(KERN_INFO "hda_codec: Unknown model for %s, "
+			   "trying auto-probe from BIOS...\n",
+			   codec->chip_name);
 		board_config = ALC260_AUTO;
 	}
 
@@ -6034,11 +6201,9 @@ static int patch_alc260(struct hda_codec *codec)
 	if (board_config != ALC260_AUTO)
 		setup_preset(spec, &alc260_presets[board_config]);
 
-	spec->stream_name_analog = "ALC260 Analog";
 	spec->stream_analog_playback = &alc260_pcm_analog_playback;
 	spec->stream_analog_capture = &alc260_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC260 Digital";
 	spec->stream_digital_playback = &alc260_pcm_digital_playback;
 	spec->stream_digital_capture = &alc260_pcm_digital_capture;
 
@@ -6115,6 +6280,16 @@ static struct hda_input_mux alc882_capture_source = {
 		{ "CD", 0x4 },
 	},
 };
+
+static struct hda_input_mux mb5_capture_source = {
+	.num_items = 3,
+	.items = {
+		{ "Mic", 0x1 },
+		{ "Line", 0x2 },
+		{ "CD", 0x4 },
+	},
+};
+
 /*
  * 2ch mode
  */
@@ -6202,6 +6377,34 @@ static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
 	{ 6, alc885_mbp_ch6_init },
 };
 
+/*
+ * 2ch
+ * Speakers/Woofer/HP = Front
+ * LineIn = Input
+ */
+static struct hda_verb alc885_mb5_ch2_init[] = {
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{ } /* end */
+};
+
+/*
+ * 6ch mode
+ * Speakers/HP = Front
+ * Woofer = LFE
+ * LineIn = Surround
+ */
+static struct hda_verb alc885_mb5_ch6_init[] = {
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc885_mb5_6ch_modes[2] = {
+	{ 2, alc885_mb5_ch2_init },
+	{ 6, alc885_mb5_ch6_init },
+};
 
 /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
  *                 Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
@@ -6244,6 +6447,25 @@ static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
 	{ } /* end */
 };
+
+static struct snd_kcontrol_new alc885_mb5_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x19, 0x00, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct snd_kcontrol_new alc882_w2jc_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -6471,6 +6693,55 @@ static struct hda_verb alc882_macpro_init_verbs[] = {
 	{ }
 };
 
+/* Macbook 5,1 */
+static struct hda_verb alc885_mb5_init_verbs[] = {
+	/* DACs */
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Front mixer */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* Surround mixer */
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* LFE mixer */
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* HP mixer */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* Front Pin (0x0c) */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* LFE Pin (0x0e) */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* HP Pin (0x0f) */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+	/* Front Mic pin: input vref at 80% */
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Line In pin */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{ }
+};
+
 /* Macbook Pro rev3 */
 static struct hda_verb alc885_mbp3_init_verbs[] = {
 	/* Front mixer: unmute input/output amp left and right (volume = 0) */
@@ -6560,45 +6831,23 @@ static struct hda_verb alc885_imac24_init_verbs[] = {
 };
 
 /* Toggle speaker-output according to the hp-jack state */
-static void alc885_imac24_automute(struct hda_codec *codec)
+static void alc885_imac24_automute_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-/* Processes unsolicited events. */
-static void alc885_imac24_unsol_event(struct hda_codec *codec,
-				      unsigned int res)
-{
-	/* Headphone insertion or removal. */
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc885_imac24_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x18;
+	spec->autocfg.speaker_pins[1] = 0x1a;
+	alc_automute_amp(codec);
 }
 
-static void alc885_mbp3_automute(struct hda_codec *codec)
+static void alc885_mbp3_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? 0 : HDA_AMP_MUTE);
+	struct alc_spec *spec = codec->spec;
 
-}
-static void alc885_mbp3_unsol_event(struct hda_codec *codec,
-				    unsigned int res)
-{
-	/* Headphone insertion or removal. */
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc885_mbp3_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 
@@ -6623,24 +6872,25 @@ static struct hda_verb alc882_targa_verbs[] = {
 /* toggle speaker-output according to the hp-jack state */
 static void alc882_targa_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	struct alc_spec *spec = codec->spec;
+	alc_automute_amp(codec);
 	snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
-				  present ? 1 : 3);
+				  spec->jack_present ? 1 : 3);
+}
+
+static void alc882_targa_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc882_targa_automute(codec);
 }
 
 static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 26 bit!
-	 */
-	if (((res >> 26) == ALC880_HP_EVENT)) {
+	if ((res >> 26) == ALC880_HP_EVENT)
 		alc882_targa_automute(codec);
-	}
 }
 
 static struct hda_verb alc882_asus_a7j_verbs[] = {
@@ -6722,7 +6972,7 @@ static void alc885_macpro_init_hook(struct hda_codec *codec)
 static void alc885_imac24_init_hook(struct hda_codec *codec)
 {
 	alc885_macpro_init_hook(codec);
-	alc885_imac24_automute(codec);
+	alc885_imac24_automute_init_hook(codec);
 }
 
 /*
@@ -6815,6 +7065,7 @@ static const char *alc882_models[ALC882_MODEL_LAST] = {
 	[ALC882_ASUS_A7J]	= "asus-a7j",
 	[ALC882_ASUS_A7M]	= "asus-a7m",
 	[ALC885_MACPRO]		= "macpro",
+	[ALC885_MB5]		= "mb5",
 	[ALC885_MBP3]		= "mbp3",
 	[ALC885_IMAC24]		= "imac24",
 	[ALC882_AUTO]		= "auto",
@@ -6892,8 +7143,20 @@ static struct alc_config_preset alc882_presets[] = {
 		.input_mux = &alc882_capture_source,
 		.dig_out_nid = ALC882_DIGOUT_NID,
 		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc885_mbp3_unsol_event,
-		.init_hook = alc885_mbp3_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc885_mbp3_init_hook,
+	},
+	[ALC885_MB5] = {
+		.mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
+		.init_verbs = { alc885_mb5_init_verbs,
+				alc880_gpio1_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
+		.dac_nids = alc882_dac_nids,
+		.channel_mode = alc885_mb5_6ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
+		.input_mux = &mb5_capture_source,
+		.dig_out_nid = ALC882_DIGOUT_NID,
+		.dig_in_nid = ALC882_DIGIN_NID,
 	},
 	[ALC885_MACPRO] = {
 		.mixers = { alc882_macpro_mixer },
@@ -6917,7 +7180,7 @@ static struct alc_config_preset alc882_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
 		.channel_mode = alc882_ch_modes,
 		.input_mux = &alc882_capture_source,
-		.unsol_event = alc885_imac24_unsol_event,
+		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc885_imac24_init_hook,
 	},
 	[ALC882_TARGA] = {
@@ -6934,7 +7197,7 @@ static struct alc_config_preset alc882_presets[] = {
 		.need_dac_fix = 1,
 		.input_mux = &alc882_capture_source,
 		.unsol_event = alc882_targa_unsol_event,
-		.init_hook = alc882_targa_automute,
+		.init_hook = alc882_targa_init_hook,
 	},
 	[ALC882_ASUS_A7J] = {
 		.mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
@@ -7014,7 +7277,6 @@ static void alc882_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -7197,10 +7459,17 @@ static int patch_alc882(struct hda_codec *codec)
 		case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
 		case 0x106b00a4: /* MacbookPro4,1 */
 		case 0x106b2c00: /* Macbook Pro rev3 */
-		case 0x106b3600: /* Macbook 3.1 */
+		/* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
 		case 0x106b3800: /* MacbookPro4,1 - latter revision */
 			board_config = ALC885_MBP3;
 			break;
+		case 0x106b3f00: /* Macbook 5,1 */
+		case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense
+				  *   seems not working, so apparently
+				  *   no perfect solution yet
+				  */
+			board_config = ALC885_MB5;
+			break;
 		default:
 			/* ALC889A is handled better as ALC888-compatible */
 			if (codec->revision_id == 0x100101 ||
@@ -7208,8 +7477,9 @@ static int patch_alc882(struct hda_codec *codec)
 				alc_free(codec);
 				return patch_alc883(codec);
 			}
-			printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
-		       			 "trying auto-probe from BIOS...\n");
+			printk(KERN_INFO "hda_codec: Unknown model for %s, "
+			       "trying auto-probe from BIOS...\n",
+			       codec->chip_name);
 			board_config = ALC882_AUTO;
 		}
 	}
@@ -7239,14 +7509,6 @@ static int patch_alc882(struct hda_codec *codec)
 	if (board_config != ALC882_AUTO)
 		setup_preset(spec, &alc882_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0885) {
-		spec->stream_name_analog = "ALC885 Analog";
-		spec->stream_name_digital = "ALC885 Digital";
-	} else {
-		spec->stream_name_analog = "ALC882 Analog";
-		spec->stream_name_digital = "ALC882 Digital";
-	}
-
 	spec->stream_analog_playback = &alc882_pcm_analog_playback;
 	spec->stream_analog_capture = &alc882_pcm_analog_capture;
 	/* FIXME: setup DAC5 */
@@ -7399,6 +7661,17 @@ static struct hda_input_mux alc883_asus_eee1601_capture_source = {
 	},
 };
 
+static struct hda_input_mux alc889A_mb31_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "Mic", 0x0 },
+		/* Front Mic (0x01) unused */
+		{ "Line", 0x2 },
+		/* Line 2 (0x03) unused */
+		/* CD (0x04) unsused? */
+	},
+};
+
 /*
  * 2ch mode
  */
@@ -7448,6 +7721,73 @@ static struct hda_channel_mode alc883_3ST_6ch_modes[3] = {
 	{ 6, alc883_3ST_ch6_init },
 };
 
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_4ST_ch2_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_4ST_ch4_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_4ST_ch6_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_4ST_ch8_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
+	{ 2, alc883_4ST_ch2_init },
+	{ 4, alc883_4ST_ch4_init },
+	{ 6, alc883_4ST_ch6_init },
+	{ 8, alc883_4ST_ch8_init },
+};
+
+
 /*
  * 2ch mode
  */
@@ -7517,6 +7857,49 @@ static struct hda_channel_mode alc883_sixstack_modes[2] = {
 	{ 8, alc883_sixstack_ch8_init },
 };
 
+/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch2_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
+	{ } /* end */
+};
+
+/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch4_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
+	{ } /* end */
+};
+
+/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */
+static struct hda_verb alc889A_mb31_ch5_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as rear */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
+	{ } /* end */
+};
+
+/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */
+static struct hda_verb alc889A_mb31_ch6_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Subwoofer off */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc889A_mb31_6ch_modes[4] = {
+	{ 2, alc889A_mb31_ch2_init },
+	{ 4, alc889A_mb31_ch4_init },
+	{ 5, alc889A_mb31_ch5_init },
+	{ 6, alc889A_mb31_ch6_init },
+};
+
 static struct hda_verb alc883_medion_eapd_verbs[] = {
         /* eanable EAPD on medion laptop */
 	{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
@@ -7782,8 +8165,6 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = {
 	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x1a, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
@@ -7797,6 +8178,42 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc889A_mb31_mixer[] = {
+	/* Output mixers */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00,
+		HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT),
+	/* Output switches */
+	HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT),
+	/* Boost mixers */
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Boost", 0x1a, 0x00, HDA_INPUT),
+	/* Input mixers */
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc883_vaiott_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct hda_bind_ctls alc883_bind_cap_vol = {
 	.ops = &snd_hda_bind_vol,
 	.values = {
@@ -7932,16 +8349,14 @@ static struct hda_verb alc883_init_verbs[] = {
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_mitac_hp_automute(struct hda_codec *codec)
+static void alc883_mitac_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /* auto-toggle front mic */
@@ -7958,25 +8373,6 @@ static void alc883_mitac_mic_automute(struct hda_codec *codec)
 }
 */
 
-static void alc883_mitac_automute(struct hda_codec *codec)
-{
-	alc883_mitac_hp_automute(codec);
-	/* alc883_mitac_mic_automute(codec); */
-}
-
-static void alc883_mitac_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_mitac_hp_automute(codec);
-		break;
-	case ALC880_MIC_EVENT:
-		/* alc883_mitac_mic_automute(codec); */
-		break;
-	}
-}
-
 static struct hda_verb alc883_mitac_verbs[] = {
 	/* HP */
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -8028,14 +8424,24 @@ static struct hda_verb alc883_tagra_verbs[] = {
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/surround */
-	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
+/* Connect Line-Out side jack (SPDIF) to Side */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+/* Connect Mic jack to CLFE */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect Line-in jack to Surround */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect HP out jack to Front */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
 
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x03},
 
 	{ } /* end */
 };
@@ -8094,29 +8500,26 @@ static struct hda_verb alc888_6st_dell_verbs[] = {
 	{ }
 };
 
-static void alc888_3st_hp_front_automute(struct hda_codec *codec)
-{
-	unsigned int present, bits;
+static struct hda_verb alc883_vaiott_verbs[] = {
+	/* HP */
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	/* enable unsolicited event */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+
+	{ } /* end */
+};
 
-static void alc888_3st_hp_unsol_event(struct hda_codec *codec,
-				      unsigned int res)
+static void alc888_3st_hp_init_hook(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc888_3st_hp_front_automute(codec);
-		break;
-	}
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x18;
+	alc_automute_amp(codec);
 }
 
 static struct hda_verb alc888_3st_hp_verbs[] = {
@@ -8213,56 +8616,18 @@ static struct hda_verb alc883_medion_md2_verbs[] = {
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_medion_md2_automute(struct hda_codec *codec)
+static void alc883_medion_md2_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc883_medion_md2_unsol_event(struct hda_codec *codec,
-					  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_medion_md2_automute(codec);
-}
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc883_tagra_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
-				  present ? 1 : 3);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_tagra_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_tagra_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_clevo_m720_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+#define alc883_tagra_init_hook		alc882_targa_init_hook
+#define alc883_tagra_unsol_event	alc882_targa_unsol_event
 
 static void alc883_clevo_m720_mic_automute(struct hda_codec *codec)
 {
@@ -8274,9 +8639,13 @@ static void alc883_clevo_m720_mic_automute(struct hda_codec *codec)
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
 
-static void alc883_clevo_m720_automute(struct hda_codec *codec)
+static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
 {
-	alc883_clevo_m720_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 	alc883_clevo_m720_mic_automute(codec);
 }
 
@@ -8284,52 +8653,32 @@ static void alc883_clevo_m720_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_clevo_m720_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc883_clevo_m720_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_2ch_fujitsu_pi2515_automute(struct hda_codec *codec)
+static void alc883_2ch_fujitsu_pi2515_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_2ch_fujitsu_pi2515_unsol_event(struct hda_codec *codec,
-						  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_2ch_fujitsu_pi2515_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
-static void alc883_haier_w66_automute(struct hda_codec *codec)
+static void alc883_haier_w66_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? 0x80 : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 0x80, bits);
-}
-
-static void alc883_haier_w66_unsol_event(struct hda_codec *codec,
-					 unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_haier_w66_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
@@ -8337,8 +8686,8 @@ static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
  	unsigned int present;
 	unsigned char bits;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
@@ -8368,23 +8717,14 @@ static void alc883_lenovo_101e_unsol_event(struct hda_codec *codec,
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_acer_aspire_automute(struct hda_codec *codec)
+static void alc883_acer_aspire_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_acer_aspire_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_acer_aspire_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	alc_automute_amp(codec);
 }
 
 static struct hda_verb alc883_acer_eapd_verbs[] = {
@@ -8405,75 +8745,39 @@ static struct hda_verb alc883_acer_eapd_verbs[] = {
 	{ }
 };
 
-static void alc888_6st_dell_front_automute(struct hda_codec *codec)
+static void alc888_6st_dell_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x1b, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc888_6st_dell_unsol_event(struct hda_codec *codec,
-					     unsigned int res)
-{
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		/* printk(KERN_DEBUG "hp_event\n"); */
-		alc888_6st_dell_front_automute(codec);
-		break;
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	spec->autocfg.speaker_pins[3] = 0x17;
+	alc_automute_amp(codec);
 }
 
-static void alc888_lenovo_sky_front_automute(struct hda_codec *codec)
+static void alc888_lenovo_sky_init_hook(struct hda_codec *codec)
 {
-	unsigned int mute;
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	spec->autocfg.speaker_pins[3] = 0x17;
+	spec->autocfg.speaker_pins[4] = 0x1a;
+	alc_automute_amp(codec);
 }
 
-static void alc883_lenovo_sky_unsol_event(struct hda_codec *codec,
-					     unsigned int res)
+static void alc883_vaiott_init_hook(struct hda_codec *codec)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc888_lenovo_sky_front_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -8561,39 +8865,33 @@ static void alc883_nb_mic_automute(struct hda_codec *codec)
 			    0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
 }
 
-static void alc883_M90V_speaker_automute(struct hda_codec *codec)
+static void alc883_M90V_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
-	snd_hda_codec_write(codec, 0x15, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
-	snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	alc_automute_pin(codec);
 }
 
 static void alc883_mode2_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_M90V_speaker_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc883_nb_mic_automute(codec);
 		break;
+	default:
+		alc_sku_unsol_event(codec, res);
+		break;
 	}
 }
 
 static void alc883_mode2_inithook(struct hda_codec *codec)
 {
-	alc883_M90V_speaker_automute(codec);
+	alc883_M90V_init_hook(codec);
 	alc883_nb_mic_automute(codec);
 }
 
@@ -8610,32 +8908,49 @@ static struct hda_verb alc888_asus_eee1601_verbs[] = {
 	{ } /* end */
 };
 
-static void alc883_eee1601_speaker_automute(struct hda_codec *codec)
+static void alc883_eee1601_inithook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc_automute_pin(codec);
 }
 
-static void alc883_eee1601_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
+static struct hda_verb alc889A_mb31_verbs[] = {
+	/* Init rear pin (used as headphone output) */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},    /* Apple Headphones */
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},           /* Connect to front */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+	/* Init line pin (used as output in 4ch and 6ch mode) */
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},           /* Connect to CLFE */
+	/* Init line 2 pin (used as headphone out by default) */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},  /* Use as input */
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */
+	{ } /* end */
+};
+
+/* Mute speakers according to the headphone jack state */
+static void alc889A_mb31_automute(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_eee1601_speaker_automute(codec);
-		break;
+	unsigned int present;
+
+	/* Mute only in 2ch or 4ch mode */
+	if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0)
+	    == 0x00) {
+		present = snd_hda_codec_read(codec, 0x15, 0,
+			AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE;
+		snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	}
 }
 
-static void alc883_eee1601_inithook(struct hda_codec *codec)
+static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	alc883_eee1601_speaker_automute(codec);
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc889A_mb31_automute(codec);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -8659,9 +8974,11 @@ static const char *alc883_models[ALC883_MODEL_LAST] = {
 	[ALC883_6ST_DIG]	= "6stack-dig",
 	[ALC883_TARGA_DIG]	= "targa-dig",
 	[ALC883_TARGA_2ch_DIG]	= "targa-2ch-dig",
+	[ALC883_TARGA_8ch_DIG]	= "targa-8ch-dig",
 	[ALC883_ACER]		= "acer",
 	[ALC883_ACER_ASPIRE]	= "acer-aspire",
 	[ALC888_ACER_ASPIRE_4930G]	= "acer-aspire-4930g",
+	[ALC888_ACER_ASPIRE_8930G]	= "acer-aspire-8930g",
 	[ALC883_MEDION]		= "medion",
 	[ALC883_MEDION_MD2]	= "medion-md2",
 	[ALC883_LAPTOP_EAPD]	= "laptop-eapd",
@@ -8678,6 +8995,8 @@ static const char *alc883_models[ALC883_MODEL_LAST] = {
 	[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
 	[ALC883_3ST_6ch_INTEL]	= "3stack-6ch-intel",
 	[ALC1200_ASUS_P5Q]	= "asus-p5q",
+	[ALC889A_MB31]		= "mb31",
+	[ALC883_SONY_VAIO_TT]	= "sony-vaio-tt",
 	[ALC883_AUTO]		= "auto",
 };
 
@@ -8693,14 +9012,20 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G",
 		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x0145, "Acer Aspire 8930G",
+		ALC888_ACER_ASPIRE_8930G),
+	SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
+		ALC888_ACER_ASPIRE_8930G),
 	SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
 		ALC888_ACER_ASPIRE_4930G),
-	/* default Acer */
-	SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER),
+	/* default Acer -- disabled as it causes more problems.
+	 *    model=auto should work fine now
+	 */
+	/* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
@@ -8736,6 +9061,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
+	SND_PCI_QUIRK(0x1462, 0x6510, "MSI GX620", ALC883_TARGA_8ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7250, "MSI", ALC883_6ST_DIG),
@@ -8768,6 +9094,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
 	SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
+	SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
 	{}
 };
 
@@ -8848,7 +9175,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_automute,
+		.init_hook = alc883_tagra_init_hook,
 	},
 	[ALC883_TARGA_2ch_DIG] = {
 		.mixers = { alc883_tagra_2ch_mixer},
@@ -8862,7 +9189,25 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_automute,
+		.init_hook = alc883_tagra_init_hook,
+	},
+	[ALC883_TARGA_8ch_DIG] = {
+		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+				alc883_tagra_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+		.adc_nids = alc883_adc_nids_rev,
+		.capsrc_nids = alc883_capsrc_nids_rev,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.dig_in_nid = ALC883_DIGIN_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_4ST_8ch_modes),
+		.channel_mode = alc883_4ST_8ch_modes,
+		.need_dac_fix = 1,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc883_tagra_unsol_event,
+		.init_hook = alc883_tagra_init_hook,
 	},
 	[ALC883_ACER] = {
 		.mixers = { alc883_base_mixer },
@@ -8887,8 +9232,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_acer_aspire_unsol_event,
-		.init_hook = alc883_acer_aspire_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_acer_aspire_init_hook,
 	},
 	[ALC888_ACER_ASPIRE_4930G] = {
 		.mixers = { alc888_base_mixer,
@@ -8907,8 +9252,29 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
-		.unsol_event = alc888_acer_aspire_4930g_unsol_event,
-		.init_hook = alc888_acer_aspire_4930g_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_acer_aspire_4930g_init_hook,
+	},
+	[ALC888_ACER_ASPIRE_8930G] = {
+		.mixers = { alc888_base_mixer,
+				alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+				alc889_acer_aspire_8930g_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+		.adc_nids = alc889_adc_nids,
+		.capsrc_nids = alc889_capsrc_nids,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+		.channel_mode = alc883_3ST_6ch_modes,
+		.need_dac_fix = 1,
+		.const_channel_count = 6,
+		.num_mux_defs =
+			ARRAY_SIZE(alc889_capture_sources),
+		.input_mux = alc889_capture_sources,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc889_acer_aspire_8930g_init_hook,
 	},
 	[ALC883_MEDION] = {
 		.mixers = { alc883_fivestack_mixer,
@@ -8932,8 +9298,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_medion_md2_unsol_event,
-		.init_hook = alc883_medion_md2_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_medion_md2_init_hook,
 	},
 	[ALC883_LAPTOP_EAPD] = {
 		.mixers = { alc883_base_mixer },
@@ -8954,7 +9320,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_clevo_m720_unsol_event,
-		.init_hook = alc883_clevo_m720_automute,
+		.init_hook = alc883_clevo_m720_init_hook,
 	},
 	[ALC883_LENOVO_101E_2ch] = {
 		.mixers = { alc883_lenovo_101e_2ch_mixer},
@@ -8978,8 +9344,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_lenovo_nb0763_capture_source,
-		.unsol_event = alc883_medion_md2_unsol_event,
-		.init_hook = alc883_medion_md2_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_medion_md2_init_hook,
 	},
 	[ALC888_LENOVO_MS7195_DIG] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9003,8 +9369,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_haier_w66_unsol_event,
-		.init_hook = alc883_haier_w66_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_haier_w66_init_hook,
 	},
 	[ALC888_3ST_HP] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9015,8 +9381,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc888_3st_hp_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc888_3st_hp_unsol_event,
-		.init_hook = alc888_3st_hp_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_3st_hp_init_hook,
 	},
 	[ALC888_6ST_DELL] = {
 		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
@@ -9028,8 +9394,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc888_6st_dell_unsol_event,
-		.init_hook = alc888_6st_dell_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_6st_dell_init_hook,
 	},
 	[ALC883_MITAC] = {
 		.mixers = { alc883_mitac_mixer },
@@ -9039,8 +9405,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_mitac_unsol_event,
-		.init_hook = alc883_mitac_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_mitac_init_hook,
 	},
 	[ALC883_FUJITSU_PI2515] = {
 		.mixers = { alc883_2ch_fujitsu_pi2515_mixer },
@@ -9052,8 +9418,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_fujitsu_pi2515_capture_source,
-		.unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event,
-		.init_hook = alc883_2ch_fujitsu_pi2515_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_2ch_fujitsu_pi2515_init_hook,
 	},
 	[ALC888_FUJITSU_XA3530] = {
 		.mixers = { alc888_base_mixer, alc883_chmode_mixer },
@@ -9070,8 +9436,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
-		.unsol_event = alc888_fujitsu_xa3530_unsol_event,
-		.init_hook = alc888_fujitsu_xa3530_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_fujitsu_xa3530_init_hook,
 	},
 	[ALC888_LENOVO_SKY] = {
 		.mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer },
@@ -9083,8 +9449,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_sixstack_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_lenovo_sky_capture_source,
-		.unsol_event = alc883_lenovo_sky_unsol_event,
-		.init_hook = alc888_lenovo_sky_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_lenovo_sky_init_hook,
 	},
 	[ALC888_ASUS_M90V] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9112,7 +9478,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_asus_eee1601_capture_source,
-		.unsol_event = alc883_eee1601_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.init_hook = alc883_eee1601_inithook,
 	},
 	[ALC1200_ASUS_P5Q] = {
@@ -9127,6 +9493,32 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
 	},
+	[ALC889A_MB31] = {
+		.mixers = { alc889A_mb31_mixer, alc883_chmode_mixer},
+		.init_verbs = { alc883_init_verbs, alc889A_mb31_verbs,
+			alc880_gpio1_init_verbs },
+		.adc_nids = alc883_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.channel_mode = alc889A_mb31_6ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes),
+		.input_mux = &alc889A_mb31_capture_source,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.unsol_event = alc889A_mb31_unsol_event,
+		.init_hook = alc889A_mb31_automute,
+	},
+	[ALC883_SONY_VAIO_TT] = {
+		.mixers = { alc883_vaiott_mixer },
+		.init_verbs = { alc883_init_verbs, alc883_vaiott_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+		.channel_mode = alc883_3ST_2ch_modes,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_vaiott_init_hook,
+	},
 };
 
 
@@ -9155,7 +9547,6 @@ static void alc883_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -9273,10 +9664,18 @@ static int patch_alc883(struct hda_codec *codec)
 	board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
 						  alc883_models,
 						  alc883_cfg_tbl);
-	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC883, "
-		       "trying auto-probe from BIOS...\n");
-		board_config = ALC883_AUTO;
+	if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
+		/* Pick up systems that don't supply PCI SSID */
+		switch (codec->subsystem_id) {
+		case 0x106b3600: /* Macbook 3.1 */
+			board_config = ALC889A_MB31;
+			break;
+		default:
+			printk(KERN_INFO
+				"hda_codec: Unknown model for %s, trying "
+				"auto-probe from BIOS...\n", codec->chip_name);
+			board_config = ALC883_AUTO;
+		}
 	}
 
 	if (board_config == ALC883_AUTO) {
@@ -9304,13 +9703,6 @@ static int patch_alc883(struct hda_codec *codec)
 
 	switch (codec->vendor_id) {
 	case 0x10ec0888:
-		if (codec->revision_id == 0x100101) {
-			spec->stream_name_analog = "ALC1200 Analog";
-			spec->stream_name_digital = "ALC1200 Digital";
-		} else {
-			spec->stream_name_analog = "ALC888 Analog";
-			spec->stream_name_digital = "ALC888 Digital";
-		}
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
 			spec->adc_nids = alc883_adc_nids;
@@ -9318,10 +9710,9 @@ static int patch_alc883(struct hda_codec *codec)
 		if (!spec->capsrc_nids)
 			spec->capsrc_nids = alc883_capsrc_nids;
 		spec->capture_style = CAPT_MIX; /* matrix-style capture */
+		spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
 		break;
 	case 0x10ec0889:
-		spec->stream_name_analog = "ALC889 Analog";
-		spec->stream_name_digital = "ALC889 Digital";
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids);
 			spec->adc_nids = alc889_adc_nids;
@@ -9332,8 +9723,6 @@ static int patch_alc883(struct hda_codec *codec)
 							capture */
 		break;
 	default:
-		spec->stream_name_analog = "ALC883 Analog";
-		spec->stream_name_digital = "ALC883 Digital";
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
 			spec->adc_nids = alc883_adc_nids;
@@ -9413,24 +9802,6 @@ static struct snd_kcontrol_new alc262_base_mixer[] = {
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
-	/*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	{ } /* end */
-};
-
 /* update HP, line and mono-out pins according to the master switch */
 static void alc262_hp_master_update(struct hda_codec *codec)
 {
@@ -9486,14 +9857,7 @@ static void alc262_hp_wildwest_unsol_event(struct hda_codec *codec,
 	alc262_hp_wildwest_automute(codec);
 }
 
-static int alc262_hp_master_sw_get(struct snd_kcontrol *kcontrol,
-				   struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct alc_spec *spec = codec->spec;
-	*ucontrol->value.integer.value = spec->master_sw;
-	return 0;
-}
+#define alc262_hp_master_sw_get		alc260_hp_master_sw_get
 
 static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol,
 				   struct snd_ctl_elem_value *ucontrol)
@@ -9509,14 +9873,17 @@ static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
+#define ALC262_HP_MASTER_SWITCH					\
+	{							\
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+		.name = "Master Playback Switch",		\
+		.info = snd_ctl_boolean_mono_info,		\
+		.get = alc262_hp_master_sw_get,			\
+		.put = alc262_hp_master_sw_put,			\
+	}
+
 static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_ctl_boolean_mono_info,
-		.get = alc262_hp_master_sw_get,
-		.put = alc262_hp_master_sw_put,
-	},
+	ALC262_HP_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
@@ -9540,13 +9907,7 @@ static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc262_HP_BPC_WildWest_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_ctl_boolean_mono_info,
-		.get = alc262_hp_master_sw_get,
-		.put = alc262_hp_master_sw_put,
-	},
+	ALC262_HP_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
@@ -9573,32 +9934,13 @@ static struct snd_kcontrol_new alc262_HP_BPC_WildWest_option_mixer[] = {
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hp_t5735_automute(struct hda_codec *codec, int force)
+static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 
-	if (force || !spec->sense_updated) {
-		unsigned int present;
-		present = snd_hda_codec_read(codec, 0x15, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
-		spec->sense_updated = 1;
-	}
-	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_OUTPUT, 0, HDA_AMP_MUTE,
-				 spec->jack_present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc262_hp_t5735_unsol_event(struct hda_codec *codec,
-					unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hp_t5735_automute(codec, 1);
-}
-
-static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
-{
-	alc262_hp_t5735_automute(codec, 1);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
+	alc_automute_amp(codec);
 }
 
 static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
@@ -9651,46 +9993,132 @@ static struct hda_input_mux alc262_hp_rp5700_capture_source = {
 	},
 };
 
-/* bind hp and internal speaker mute (with plug check) */
-static int alc262_sony_master_sw_put(struct snd_kcontrol *kcontrol,
-				     struct snd_ctl_elem_value *ucontrol)
+/* bind hp and internal speaker mute (with plug check) as master switch */
+static void alc262_hippo_master_update(struct hda_codec *codec)
 {
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	long *valp = ucontrol->value.integer.value;
-	int change;
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+	hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
+	hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0];
+	unsigned int mute;
 
-	/* change hp mute */
-	change = snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
-	if (change) {
-		/* change speaker according to HP jack state */
-		struct alc_spec *spec = codec->spec;
-		unsigned int mute;
-		if (spec->jack_present)
-			mute = HDA_AMP_MUTE;
-		else
-			mute = snd_hda_codec_amp_read(codec, 0x15, 0,
-						      HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
+	/* HP */
+	mute = spec->master_sw ? 0 : HDA_AMP_MUTE;
+	snd_hda_codec_amp_stereo(codec, hp_nid, HDA_OUTPUT, 0,
+				 HDA_AMP_MUTE, mute);
+	/* mute internal speaker per jack sense */
+	if (spec->jack_present)
+		mute = HDA_AMP_MUTE;
+	if (line_nid)
+		snd_hda_codec_amp_stereo(codec, line_nid, HDA_OUTPUT, 0,
 					 HDA_AMP_MUTE, mute);
+	if (speaker_nid && speaker_nid != line_nid)
+		snd_hda_codec_amp_stereo(codec, speaker_nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+}
+
+#define alc262_hippo_master_sw_get	alc262_hp_master_sw_get
+
+static int alc262_hippo_master_sw_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	int val = !!*ucontrol->value.integer.value;
+
+	if (val == spec->master_sw)
+		return 0;
+	spec->master_sw = val;
+	alc262_hippo_master_update(codec);
+	return 1;
+}
+
+#define ALC262_HIPPO_MASTER_SWITCH				\
+	{							\
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+		.name = "Master Playback Switch",		\
+		.info = snd_ctl_boolean_mono_info,		\
+		.get = alc262_hippo_master_sw_get,		\
+		.put = alc262_hippo_master_sw_put,		\
 	}
-	return change;
+
+static struct snd_kcontrol_new alc262_hippo_mixer[] = {
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
+/* mute/unmute internal speaker according to the hp jack and mute state */
+static void alc262_hippo_automute(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+	unsigned int present;
+
+	/* need to execute and sync at first */
+	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, hp_nid, 0,
+				     AC_VERB_GET_PIN_SENSE, 0);
+	spec->jack_present = (present & 0x80000000) != 0;
+	alc262_hippo_master_update(codec);
+}
+
+static void alc262_hippo_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+	if ((res >> 26) != ALC880_HP_EVENT)
+		return;
+	alc262_hippo_automute(codec);
+}
+
+static void alc262_hippo_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc262_hippo_automute(codec);
+}
+
+static void alc262_hippo1_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc262_hippo_automute(codec);
 }
 
+
 static struct snd_kcontrol_new alc262_sony_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc262_sony_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
@@ -9699,8 +10127,8 @@ static struct snd_kcontrol_new alc262_sony_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc262_benq_t31_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
@@ -9741,34 +10169,15 @@ static struct hda_verb alc262_tyan_verbs[] = {
 };
 
 /* unsolicited event for HP jack sensing */
-static void alc262_tyan_automute(struct hda_codec *codec)
+static void alc262_tyan_init_hook(struct hda_codec *codec)
 {
-	unsigned int mute;
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute line output on ATX panel */
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute line output if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
-static void alc262_tyan_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_tyan_automute(codec);
-}
 
 #define alc262_capture_mixer		alc882_capture_mixer
 #define alc262_capture_alt_mixer	alc882_capture_alt_mixer
@@ -9923,99 +10332,25 @@ static void alc262_dmic_automute(struct hda_codec *codec)
 				AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x09);
 }
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc262_toshiba_s06_speaker_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x15, 0,
-					AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x14, 0,
-					AC_VERB_SET_PIN_WIDGET_CONTROL, bits);
-}
-
-
 
 /* unsolicited event for HP jack sensing */
 static void alc262_toshiba_s06_unsol_event(struct hda_codec *codec,
 				       unsigned int res)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc262_toshiba_s06_speaker_automute(codec);
 	if ((res >> 26) == ALC880_MIC_EVENT)
 		alc262_dmic_automute(codec);
-
+	else
+		alc_sku_unsol_event(codec, res);
 }
 
 static void alc262_toshiba_s06_init_hook(struct hda_codec *codec)
 {
-	alc262_toshiba_s06_speaker_automute(codec);
-	alc262_dmic_automute(codec);
-}
-
-/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hippo_automute(struct hda_codec *codec)
-{
 	struct alc_spec *spec = codec->spec;
-	unsigned int mute;
-	unsigned int present;
-
-	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, 0x15, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
-	if (spec->jack_present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc262_hippo_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hippo_automute(codec);
-}
-
-static void alc262_hippo1_automute(struct hda_codec *codec)
-{
-	unsigned int mute;
-	unsigned int present;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc262_hippo1_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hippo1_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
+	alc262_dmic_automute(codec);
 }
 
 /*
@@ -10285,14 +10620,7 @@ static struct snd_kcontrol_new alc262_lenovo_3000_mixer[] = {
 
 static struct snd_kcontrol_new alc262_toshiba_rx1_mixer[] = {
 	HDA_BIND_VOL("Master Playback Volume", &alc262_fujitsu_bind_master_vol),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc262_sony_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
@@ -10639,31 +10967,46 @@ static struct hda_verb alc262_HP_BPC_init_verbs[] = {
 	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
         {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 
 
 	/* FIXME: use matrix-type input source selection */
-	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
-	/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 0b, 12 */
+	/* Input mixer1: only unmute Mic */
 	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 	/* Input mixer2 */
 	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 	/* Input mixer3 */
 	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 
 	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 
@@ -10843,6 +11186,8 @@ static int alc262_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x14, 0x1b);
+
 	return 1;
 }
 
@@ -10945,7 +11290,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.input_mux = &alc262_capture_source,
 	},
 	[ALC262_HIPPO] = {
-		.mixers = { alc262_base_mixer },
+		.mixers = { alc262_hippo_mixer },
 		.init_verbs = { alc262_init_verbs, alc262_hippo_unsol_verbs},
 		.num_dacs = ARRAY_SIZE(alc262_dac_nids),
 		.dac_nids = alc262_dac_nids,
@@ -10955,7 +11300,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_HIPPO_1] = {
 		.mixers = { alc262_hippo1_mixer },
@@ -10967,8 +11312,8 @@ static struct alc_config_preset alc262_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_hippo1_unsol_event,
-		.init_hook = alc262_hippo1_automute,
+		.unsol_event = alc262_hippo_unsol_event,
+		.init_hook = alc262_hippo1_init_hook,
 	},
 	[ALC262_FUJITSU] = {
 		.mixers = { alc262_fujitsu_mixer },
@@ -11030,7 +11375,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_hp_t5735_unsol_event,
+		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc262_hp_t5735_init_hook,
 	},
 	[ALC262_HP_RP5700] = {
@@ -11062,7 +11407,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_BENQ_T31] = {
 		.mixers = { alc262_benq_t31_mixer },
@@ -11074,7 +11419,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_ULTRA] = {
 		.mixers = { alc262_ultra_mixer },
@@ -11139,7 +11484,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_TYAN] = {
 		.mixers = { alc262_tyan_mixer },
@@ -11151,8 +11496,8 @@ static struct alc_config_preset alc262_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_tyan_unsol_event,
-		.init_hook = alc262_tyan_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc262_tyan_init_hook,
 	},
 };
 
@@ -11187,8 +11532,8 @@ static int patch_alc262(struct hda_codec *codec)
 						  alc262_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC262, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC262_AUTO;
 	}
 
@@ -11217,11 +11562,9 @@ static int patch_alc262(struct hda_codec *codec)
 	if (board_config != ALC262_AUTO)
 		setup_preset(spec, &alc262_presets[board_config]);
 
-	spec->stream_name_analog = "ALC262 Analog";
 	spec->stream_analog_playback = &alc262_pcm_analog_playback;
 	spec->stream_analog_capture = &alc262_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC262 Digital";
 	spec->stream_digital_playback = &alc262_pcm_digital_playback;
 	spec->stream_digital_capture = &alc262_pcm_digital_capture;
 
@@ -11296,6 +11639,17 @@ static struct snd_kcontrol_new alc268_base_mixer[] = {
 	{ }
 };
 
+static struct snd_kcontrol_new alc268_toshiba_mixer[] = {
+	/* output mixer control */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT),
+	{ }
+};
+
 /* bind Beep switches of both NID 0x0f and 0x10 */
 static struct hda_bind_ctls alc268_bind_beep_sw = {
 	.ops = &snd_hda_bind_sw,
@@ -11319,8 +11673,6 @@ static struct hda_verb alc268_eapd_verbs[] = {
 };
 
 /* Toshiba specific */
-#define alc268_toshiba_automute	alc262_hippo_automute
-
 static struct hda_verb alc268_toshiba_verbs[] = {
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 	{ } /* end */
@@ -11456,13 +11808,8 @@ static struct hda_verb alc268_acer_verbs[] = {
 };
 
 /* unsolicited event for HP jack sensing */
-static void alc268_toshiba_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc268_toshiba_automute(codec);
-}
+#define alc268_toshiba_unsol_event	alc262_hippo_unsol_event
+#define alc268_toshiba_init_hook	alc262_hippo_init_hook
 
 static void alc268_acer_unsol_event(struct hda_codec *codec,
 				       unsigned int res)
@@ -11537,30 +11884,15 @@ static struct hda_verb alc268_dell_verbs[] = {
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc268_dell_automute(struct hda_codec *codec)
+static void alc268_dell_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int mute;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0);
-	if (present & 0x80000000)
-		mute = HDA_AMP_MUTE;
-	else
-		mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0);
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, mute);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc268_dell_unsol_event(struct hda_codec *codec,
-				    unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc268_dell_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
 }
 
-#define alc268_dell_init_hook	alc268_dell_automute
-
 static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = {
 	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x2, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
@@ -11579,16 +11911,6 @@ static struct hda_verb alc267_quanta_il1_verbs[] = {
 	{ }
 };
 
-static void alc267_quanta_il1_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    present ? 0 : PIN_OUT);
-}
-
 static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -11600,9 +11922,13 @@ static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
 			    present ? 0x00 : 0x01);
 }
 
-static void alc267_quanta_il1_automute(struct hda_codec *codec)
+static void alc267_quanta_il1_init_hook(struct hda_codec *codec)
 {
-	alc267_quanta_il1_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
 	alc267_quanta_il1_mic_automute(codec);
 }
 
@@ -11610,12 +11936,12 @@ static void alc267_quanta_il1_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc267_quanta_il1_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc267_quanta_il1_mic_automute(codec);
 		break;
+	default:
+		alc_sku_unsol_event(codec, res);
+		break;
 	}
 }
 
@@ -12063,16 +12389,16 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 						ALC268_ACER_ASPIRE_ONE),
 	SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
 	SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
-	SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series",
+			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
-	SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x1179, 0xff64, "TOSHIBA L305", ALC268_TOSHIBA),
+	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
+	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
 	SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
-	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
+	SND_PCI_QUIRK(0x1854, 0x1775, "LG R510", ALC268_DELL),
 	{}
 };
 
@@ -12090,7 +12416,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc267_quanta_il1_unsol_event,
-		.init_hook = alc267_quanta_il1_automute,
+		.init_hook = alc267_quanta_il1_init_hook,
 	},
 	[ALC268_3ST] = {
 		.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
@@ -12108,7 +12434,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.input_mux = &alc268_capture_source,
 	},
 	[ALC268_TOSHIBA] = {
-		.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
+		.mixers = { alc268_toshiba_mixer, alc268_capture_alt_mixer,
 			    alc268_beep_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc268_toshiba_verbs },
@@ -12122,7 +12448,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc268_toshiba_unsol_event,
-		.init_hook = alc268_toshiba_automute,
+		.init_hook = alc268_toshiba_init_hook,
 	},
 	[ALC268_ACER] = {
 		.mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
@@ -12185,7 +12511,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.hp_nid = 0x02,
 		.num_channel_mode = ARRAY_SIZE(alc268_modes),
 		.channel_mode = alc268_modes,
-		.unsol_event = alc268_dell_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.init_hook = alc268_dell_init_hook,
 		.input_mux = &alc268_capture_source,
 	},
@@ -12205,7 +12531,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc268_toshiba_unsol_event,
-		.init_hook = alc268_toshiba_automute
+		.init_hook = alc268_toshiba_init_hook
 	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC268_TEST] = {
@@ -12243,8 +12569,8 @@ static int patch_alc268(struct hda_codec *codec)
 						  alc268_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC268, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC268_AUTO;
 	}
 
@@ -12265,14 +12591,6 @@ static int patch_alc268(struct hda_codec *codec)
 	if (board_config != ALC268_AUTO)
 		setup_preset(spec, &alc268_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0267) {
-		spec->stream_name_analog = "ALC267 Analog";
-		spec->stream_name_digital = "ALC267 Digital";
-	} else {
-		spec->stream_name_analog = "ALC268 Analog";
-		spec->stream_name_digital = "ALC268 Digital";
-	}
-
 	spec->stream_analog_playback = &alc268_pcm_analog_playback;
 	spec->stream_analog_capture = &alc268_pcm_analog_capture;
 	spec->stream_analog_alt_capture = &alc268_pcm_analog_alt_capture;
@@ -13099,8 +13417,8 @@ static int patch_alc269(struct hda_codec *codec)
 						  alc269_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC269, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC269_AUTO;
 	}
 
@@ -13127,7 +13445,6 @@ static int patch_alc269(struct hda_codec *codec)
 	if (board_config != ALC269_AUTO)
 		setup_preset(spec, &alc269_presets[board_config]);
 
-	spec->stream_name_analog = "ALC269 Analog";
 	if (codec->subsystem_id == 0x17aa3bf8) {
 		/* Due to a hardware problem on Lenovo Ideadpad, we need to
 		 * fix the sample rate of analog I/O to 44.1kHz
@@ -13138,7 +13455,6 @@ static int patch_alc269(struct hda_codec *codec)
 		spec->stream_analog_playback = &alc269_pcm_analog_playback;
 		spec->stream_analog_capture = &alc269_pcm_analog_capture;
 	}
-	spec->stream_name_digital = "ALC269 Digital";
 	spec->stream_digital_playback = &alc269_pcm_digital_playback;
 	spec->stream_digital_capture = &alc269_pcm_digital_capture;
 
@@ -13927,7 +14243,6 @@ static void alc861_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x0e, 0x0f, 0x0b);
 	for (i = 0; i < spec->autocfg.line_outs; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -14010,6 +14325,8 @@ static int alc861_parse_auto_config(struct hda_codec *codec)
 	spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
 	set_capture_mixer(spec);
 
+	alc_ssid_check(codec, 0x0e, 0x0f, 0x0b);
+
 	return 1;
 }
 
@@ -14199,8 +14516,8 @@ static int patch_alc861(struct hda_codec *codec)
 						  alc861_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC861, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC861_AUTO;
 	}
 
@@ -14227,11 +14544,9 @@ static int patch_alc861(struct hda_codec *codec)
 	if (board_config != ALC861_AUTO)
 		setup_preset(spec, &alc861_presets[board_config]);
 
-	spec->stream_name_analog = "ALC861 Analog";
 	spec->stream_analog_playback = &alc861_pcm_analog_playback;
 	spec->stream_analog_capture = &alc861_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC861 Digital";
 	spec->stream_digital_playback = &alc861_pcm_digital_playback;
 	spec->stream_digital_capture = &alc861_pcm_digital_capture;
 
@@ -14618,19 +14933,6 @@ static struct hda_verb alc861vd_lenovo_unsol_verbs[] = {
 	{}
 };
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc861vd_lenovo_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
 static void alc861vd_lenovo_mic_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -14643,9 +14945,13 @@ static void alc861vd_lenovo_mic_automute(struct hda_codec *codec)
 				 HDA_AMP_MUTE, bits);
 }
 
-static void alc861vd_lenovo_automute(struct hda_codec *codec)
+static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
 {
-	alc861vd_lenovo_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 	alc861vd_lenovo_mic_automute(codec);
 }
 
@@ -14653,12 +14959,12 @@ static void alc861vd_lenovo_unsol_event(struct hda_codec *codec,
 					unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc861vd_lenovo_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc861vd_lenovo_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
@@ -14708,20 +15014,13 @@ static struct hda_verb alc861vd_dallas_verbs[] = {
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc861vd_dallas_automute(struct hda_codec *codec)
+static void alc861vd_dallas_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc861vd_dallas_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -14835,7 +15134,7 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_capture_source,
 		.unsol_event = alc861vd_lenovo_unsol_event,
-		.init_hook = alc861vd_lenovo_automute,
+		.init_hook = alc861vd_lenovo_init_hook,
 	},
 	[ALC861VD_DALLAS] = {
 		.mixers = { alc861vd_dallas_mixer },
@@ -14845,8 +15144,8 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_dallas_capture_source,
-		.unsol_event = alc861vd_dallas_unsol_event,
-		.init_hook = alc861vd_dallas_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc861vd_dallas_init_hook,
 	},
 	[ALC861VD_HP] = {
 		.mixers = { alc861vd_hp_mixer },
@@ -14857,8 +15156,8 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_hp_capture_source,
-		.unsol_event = alc861vd_dallas_unsol_event,
-		.init_hook = alc861vd_dallas_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc861vd_dallas_init_hook,
 	},
 	[ALC660VD_ASUS_V1S] = {
 		.mixers = { alc861vd_lenovo_mixer },
@@ -14873,7 +15172,7 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_capture_source,
 		.unsol_event = alc861vd_lenovo_unsol_event,
-		.init_hook = alc861vd_lenovo_automute,
+		.init_hook = alc861vd_lenovo_init_hook,
 	},
 };
 
@@ -14891,7 +15190,6 @@ static void alc861vd_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -15109,6 +15407,8 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -15140,8 +15440,8 @@ static int patch_alc861vd(struct hda_codec *codec)
 						  alc861vd_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC660VD/"
-			"ALC861VD, trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC861VD_AUTO;
 	}
 
@@ -15169,13 +15469,8 @@ static int patch_alc861vd(struct hda_codec *codec)
 		setup_preset(spec, &alc861vd_presets[board_config]);
 
 	if (codec->vendor_id == 0x10ec0660) {
-		spec->stream_name_analog = "ALC660-VD Analog";
-		spec->stream_name_digital = "ALC660-VD Digital";
 		/* always turn on EAPD */
 		add_verb(spec, alc660vd_eapd_verbs);
-	} else {
-		spec->stream_name_analog = "ALC861VD Analog";
-		spec->stream_name_digital = "ALC861VD Digital";
 	}
 
 	spec->stream_analog_playback = &alc861vd_pcm_analog_playback;
@@ -15289,6 +15584,38 @@ static struct hda_input_mux alc663_m51va_capture_source = {
 	},
 };
 
+#if 1 /* set to 0 for testing other input sources below */
+static struct hda_input_mux alc272_nc10_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "Autoselect Mic", 0x0 },
+		{ "Internal Mic", 0x1 },
+	},
+};
+#else
+static struct hda_input_mux alc272_nc10_capture_source = {
+	.num_items = 16,
+	.items = {
+		{ "Autoselect Mic", 0x0 },
+		{ "Internal Mic", 0x1 },
+		{ "In-0x02", 0x2 },
+		{ "In-0x03", 0x3 },
+		{ "In-0x04", 0x4 },
+		{ "In-0x05", 0x5 },
+		{ "In-0x06", 0x6 },
+		{ "In-0x07", 0x7 },
+		{ "In-0x08", 0x8 },
+		{ "In-0x09", 0x9 },
+		{ "In-0x0a", 0x0a },
+		{ "In-0x0b", 0x0b },
+		{ "In-0x0c", 0x0c },
+		{ "In-0x0d", 0x0d },
+		{ "In-0x0e", 0x0e },
+		{ "In-0x0f", 0x0f },
+	},
+};
+#endif
+
 /*
  * 2ch mode
  */
@@ -15428,10 +15755,8 @@ static struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
 
 	HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -15444,15 +15769,11 @@ static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = {
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x04, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x04, 2, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("MuteCtrl Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
@@ -15960,51 +16281,25 @@ static void alc662_eeepc_mic_automute(struct hda_codec *codec)
 static void alc662_eeepc_unsol_event(struct hda_codec *codec,
 				     unsigned int res)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc262_hippo1_automute( codec );
-
 	if ((res >> 26) == ALC880_MIC_EVENT)
 		alc662_eeepc_mic_automute(codec);
+	else
+		alc262_hippo_unsol_event(codec, res);
 }
 
 static void alc662_eeepc_inithook(struct hda_codec *codec)
 {
-	alc262_hippo1_automute( codec );
+	alc262_hippo1_init_hook(codec);
 	alc662_eeepc_mic_automute(codec);
 }
 
-static void alc662_eeepc_ep20_automute(struct hda_codec *codec)
-{
-	unsigned int mute;
-	unsigned int present;
-
-	snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-					HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-					HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc662_eeepc_ep20_unsol_event(struct hda_codec *codec,
-					  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc662_eeepc_ep20_automute(codec);
-}
-
 static void alc662_eeepc_ep20_inithook(struct hda_codec *codec)
 {
-	alc662_eeepc_ep20_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc262_hippo_master_update(codec);
 }
 
 static void alc663_m51va_speaker_automute(struct hda_codec *codec)
@@ -16338,35 +16633,9 @@ static void alc663_g50v_inithook(struct hda_codec *codec)
 	alc662_eeepc_mic_automute(codec);
 }
 
-/* bind hp and internal speaker mute (with plug check) */
-static int alc662_ecs_master_sw_put(struct snd_kcontrol *kcontrol,
-				     struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	long *valp = ucontrol->value.integer.value;
-	int change;
-
-	change = snd_hda_codec_amp_update(codec, 0x1b, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x1b, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
-	if (change)
-		alc262_hippo1_automute(codec);
-	return change;
-}
-
 static struct snd_kcontrol_new alc662_ecs_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc662_ecs_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 
 	HDA_CODEC_VOLUME("e-Mic/LineIn Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("e-Mic/LineIn Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -16378,6 +16647,23 @@ static struct snd_kcontrol_new alc662_ecs_mixer[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc272_nc10_mixer[] = {
+	/* Master Playback automatically created from Speaker and Headphone */
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+
+	HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Ext Mic Boost", 0x18, 0, HDA_INPUT),
+
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 #define alc662_loopbacks	alc880_loopbacks
 #endif
@@ -16411,6 +16697,9 @@ static const char *alc662_models[ALC662_MODEL_LAST] = {
 	[ALC663_ASUS_MODE4] = "asus-mode4",
 	[ALC663_ASUS_MODE5] = "asus-mode5",
 	[ALC663_ASUS_MODE6] = "asus-mode6",
+	[ALC272_DELL]		= "dell",
+	[ALC272_DELL_ZM1]	= "dell-zm1",
+	[ALC272_SAMSUNG_NC10]	= "samsung-nc10",
 	[ALC662_AUTO]		= "auto",
 };
 
@@ -16468,6 +16757,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
@@ -16558,7 +16848,7 @@ static struct alc_config_preset alc662_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
 		.channel_mode = alc662_3ST_6ch_modes,
 		.input_mux = &alc662_lenovo_101e_capture_source,
-		.unsol_event = alc662_eeepc_ep20_unsol_event,
+		.unsol_event = alc662_eeepc_unsol_event,
 		.init_hook = alc662_eeepc_ep20_inithook,
 	},
 	[ALC662_ECS] = {
@@ -16739,6 +17029,18 @@ static struct alc_config_preset alc662_presets[] = {
 		.unsol_event = alc663_m51va_unsol_event,
 		.init_hook = alc663_m51va_inithook,
 	},
+	[ALC272_SAMSUNG_NC10] = {
+		.mixers = { alc272_nc10_mixer },
+		.init_verbs = { alc662_init_verbs,
+				alc663_21jd_amic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc272_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc272_nc10_capture_source,
+		.unsol_event = alc663_mode4_unsol_event,
+		.init_hook = alc663_mode4_inithook,
+	},
 };
 
 
@@ -16933,7 +17235,6 @@ static void alc662_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -17030,6 +17331,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -17062,8 +17365,8 @@ static int patch_alc662(struct hda_codec *codec)
 						  alc662_models,
 			  	                  alc662_cfg_tbl);
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC662, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC662_AUTO;
 	}
 
@@ -17090,17 +17393,6 @@ static int patch_alc662(struct hda_codec *codec)
 	if (board_config != ALC662_AUTO)
 		setup_preset(spec, &alc662_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0663) {
-		spec->stream_name_analog = "ALC663 Analog";
-		spec->stream_name_digital = "ALC663 Digital";
-	} else if (codec->vendor_id == 0x10ec0272) {
-		spec->stream_name_analog = "ALC272 Analog";
-		spec->stream_name_digital = "ALC272 Digital";
-	} else {
-		spec->stream_name_analog = "ALC662 Analog";
-		spec->stream_name_digital = "ALC662 Digital";
-	}
-
 	spec->stream_analog_playback = &alc662_pcm_analog_playback;
 	spec->stream_analog_capture = &alc662_pcm_analog_capture;
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index d2fd8ef6aef..93e47c96a38 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -100,6 +100,7 @@ enum {
 	STAC_HP_M4,
 	STAC_HP_DV5,
 	STAC_HP_HDX,
+	STAC_HP_DV4_1222NR,
 	STAC_92HD71BXX_MODELS
 };
 
@@ -193,6 +194,7 @@ struct sigmatel_spec {
 	unsigned int gpio_dir;
 	unsigned int gpio_data;
 	unsigned int gpio_mute;
+	unsigned int gpio_led;
 
 	/* stream */
 	unsigned int stream_delay;
@@ -634,6 +636,40 @@ static int stac92xx_smux_enum_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static unsigned int stac92xx_vref_set(struct hda_codec *codec,
+					hda_nid_t nid, unsigned int new_vref)
+{
+	unsigned int error;
+	unsigned int pincfg;
+	pincfg = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+
+	pincfg &= 0xff;
+	pincfg &= ~(AC_PINCTL_VREFEN | AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+	pincfg |= new_vref;
+
+	if (new_vref == AC_PINCTL_VREF_HIZ)
+		pincfg |= AC_PINCTL_OUT_EN;
+	else
+		pincfg |= AC_PINCTL_IN_EN;
+
+	error = snd_hda_codec_write_cache(codec, nid, 0,
+					AC_VERB_SET_PIN_WIDGET_CONTROL, pincfg);
+	if (error < 0)
+		return error;
+	else
+		return 1;
+}
+
+static unsigned int stac92xx_vref_get(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int vref;
+	vref = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+	vref &= AC_PINCTL_VREFEN;
+	return vref;
+}
+
 static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -995,6 +1031,17 @@ static struct hda_verb stac9205_core_init[] = {
 		.private_value = verb_read | (verb_write << 16), \
 	}
 
+#define DC_BIAS(xname, idx, nid) \
+	{ \
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+		.name = xname, \
+		.index = idx, \
+		.info = stac92xx_dc_bias_info, \
+		.get = stac92xx_dc_bias_get, \
+		.put = stac92xx_dc_bias_put, \
+		.private_value = nid, \
+	}
+
 static struct snd_kcontrol_new stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -1543,6 +1590,8 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
+		      "SigmaTel",STAC_9205_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_REF),
 	/* Dell laptops have BIOS problem */
@@ -1837,6 +1886,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
 	[STAC_HP_M4]		= NULL,
 	[STAC_HP_DV5]		= NULL,
 	[STAC_HP_HDX]           = NULL,
+	[STAC_HP_DV4_1222NR]	= NULL,
 };
 
 static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
@@ -1848,6 +1898,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
 	[STAC_HP_M4] = "hp-m4",
 	[STAC_HP_DV5] = "hp-dv5",
 	[STAC_HP_HDX] = "hp-hdx",
+	[STAC_HP_DV4_1222NR] = "hp-dv4-1222nr",
 };
 
 static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
@@ -1856,6 +1907,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 		      "DFI LanParty", STAC_92HD71BXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_92HD71BXX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
+		      "HP dv4-1222nr", STAC_HP_DV4_1222NR),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
 		      "HP", STAC_HP_DV5),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
@@ -2545,7 +2598,8 @@ static int stac92xx_build_pcms(struct hda_codec *codec)
 	return 0;
 }
 
-static unsigned int stac92xx_get_vref(struct hda_codec *codec, hda_nid_t nid)
+static unsigned int stac92xx_get_default_vref(struct hda_codec *codec,
+					hda_nid_t nid)
 {
 	unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
 	pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
@@ -2599,15 +2653,108 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
-#define stac92xx_io_switch_info		snd_ctl_boolean_mono_info
+static int stac92xx_dc_bias_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	int i;
+	static char *texts[] = {
+		"Mic In", "Line In", "Line Out"
+	};
+
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid = kcontrol->private_value;
+
+	if (nid == spec->mic_switch || nid == spec->line_switch)
+		i = 3;
+	else
+		i = 2;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = i;
+	uinfo->count = 1;
+	if (uinfo->value.enumerated.item >= i)
+		uinfo->value.enumerated.item = i-1;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value;
+	unsigned int vref = stac92xx_vref_get(codec, nid);
+
+	if (vref == stac92xx_get_default_vref(codec, nid))
+		ucontrol->value.enumerated.item[0] = 0;
+	else if (vref == AC_PINCTL_VREF_GRD)
+		ucontrol->value.enumerated.item[0] = 1;
+	else if (vref == AC_PINCTL_VREF_HIZ)
+		ucontrol->value.enumerated.item[0] = 2;
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int new_vref = 0;
+	unsigned int error;
+	hda_nid_t nid = kcontrol->private_value;
+
+	if (ucontrol->value.enumerated.item[0] == 0)
+		new_vref = stac92xx_get_default_vref(codec, nid);
+	else if (ucontrol->value.enumerated.item[0] == 1)
+		new_vref = AC_PINCTL_VREF_GRD;
+	else if (ucontrol->value.enumerated.item[0] == 2)
+		new_vref = AC_PINCTL_VREF_HIZ;
+	else
+		return 0;
+
+	if (new_vref != stac92xx_vref_get(codec, nid)) {
+		error = stac92xx_vref_set(codec, nid, new_vref);
+		return error;
+	}
+
+	return 0;
+}
+
+static int stac92xx_io_switch_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[2];
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (kcontrol->private_value == spec->line_switch)
+		texts[0] = "Line In";
+	else
+		texts[0] = "Mic In";
+	texts[1] = "Line Out";
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = 2;
+	uinfo->count = 1;
+
+	if (uinfo->value.enumerated.item >= 2)
+		uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
 
 static int stac92xx_io_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-	int io_idx = kcontrol-> private_value & 0xff;
+	hda_nid_t nid = kcontrol->private_value;
+	int io_idx = (nid == spec->mic_switch) ? 1 : 0;
 
-	ucontrol->value.integer.value[0] = spec->io_switch[io_idx];
+	ucontrol->value.enumerated.item[0] = spec->io_switch[io_idx];
 	return 0;
 }
 
@@ -2615,9 +2762,9 @@ static int stac92xx_io_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 {
         struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-        hda_nid_t nid = kcontrol->private_value >> 8;
-	int io_idx = kcontrol-> private_value & 0xff;
-	unsigned short val = !!ucontrol->value.integer.value[0];
+	hda_nid_t nid = kcontrol->private_value;
+	int io_idx = (nid == spec->mic_switch) ? 1 : 0;
+	unsigned short val = !!ucontrol->value.enumerated.item[0];
 
 	spec->io_switch[io_idx] = val;
 
@@ -2626,7 +2773,7 @@ static int stac92xx_io_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 	else {
 		unsigned int pinctl = AC_PINCTL_IN_EN;
 		if (io_idx) /* set VREF for mic */
-			pinctl |= stac92xx_get_vref(codec, nid);
+			pinctl |= stac92xx_get_default_vref(codec, nid);
 		stac92xx_auto_set_pinctl(codec, nid, pinctl);
 	}
 
@@ -2707,7 +2854,8 @@ enum {
 	STAC_CTL_WIDGET_AMP_VOL,
 	STAC_CTL_WIDGET_HP_SWITCH,
 	STAC_CTL_WIDGET_IO_SWITCH,
-	STAC_CTL_WIDGET_CLFE_SWITCH
+	STAC_CTL_WIDGET_CLFE_SWITCH,
+	STAC_CTL_WIDGET_DC_BIAS
 };
 
 static struct snd_kcontrol_new stac92xx_control_templates[] = {
@@ -2719,6 +2867,7 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = {
 	STAC_CODEC_HP_SWITCH(NULL),
 	STAC_CODEC_IO_SWITCH(NULL, 0),
 	STAC_CODEC_CLFE_SWITCH(NULL, 0),
+	DC_BIAS(NULL, 0, 0),
 };
 
 /* add dynamic controls */
@@ -2782,6 +2931,34 @@ static struct snd_kcontrol_new stac_input_src_temp = {
 	.put = stac92xx_mux_enum_put,
 };
 
+static inline int stac92xx_add_jack_mode_control(struct hda_codec *codec,
+						hda_nid_t nid, int idx)
+{
+	int def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	int control = 0;
+	struct sigmatel_spec *spec = codec->spec;
+	char name[22];
+
+	if (!((get_defcfg_connect(def_conf)) & AC_JACK_PORT_FIXED)) {
+		if (stac92xx_get_default_vref(codec, nid) == AC_PINCTL_VREF_GRD
+			&& nid == spec->line_switch)
+			control = STAC_CTL_WIDGET_IO_SWITCH;
+		else if (snd_hda_query_pin_caps(codec, nid)
+			& (AC_PINCAP_VREF_GRD << AC_PINCAP_VREF_SHIFT))
+			control = STAC_CTL_WIDGET_DC_BIAS;
+		else if (nid == spec->mic_switch)
+			control = STAC_CTL_WIDGET_IO_SWITCH;
+	}
+
+	if (control) {
+		strcpy(name, auto_pin_cfg_labels[idx]);
+		return stac92xx_add_control(codec->spec, control,
+					strcat(name, " Jack Mode"), nid);
+	}
+
+	return 0;
+}
+
 static int stac92xx_add_input_source(struct sigmatel_spec *spec)
 {
 	struct snd_kcontrol_new *knew;
@@ -3144,7 +3321,9 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 					       const struct auto_pin_cfg *cfg)
 {
 	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid;
 	int err;
+	int idx;
 
 	err = create_multi_out_ctls(codec, cfg->line_outs, cfg->line_out_pins,
 				    spec->multiout.dac_nids,
@@ -3161,20 +3340,13 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 			return err;
 	}
 
-	if (spec->line_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Line In as Output Switch",
-					   spec->line_switch << 8);
-		if (err < 0)
-			return err;
-	}
-
-	if (spec->mic_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Mic as Output Switch",
-					   (spec->mic_switch << 8) | 1);
-		if (err < 0)
-			return err;
+	for (idx = AUTO_PIN_MIC; idx <= AUTO_PIN_FRONT_LINE; idx++) {
+		nid = cfg->input_pins[idx];
+		if (nid) {
+			err = stac92xx_add_jack_mode_control(codec, nid, idx);
+			if (err < 0)
+				return err;
+		}
 	}
 
 	return 0;
@@ -3639,6 +3811,8 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
 		err = snd_hda_attach_beep_device(codec, nid);
 		if (err < 0)
 			return err;
+		/* IDT/STAC codecs have linear beep tone parameter */
+		codec->beep->linear_tone = 1;
 		/* if no beep switch is available, make its own one */
 		caps = query_amp_caps(codec, nid, HDA_OUTPUT);
 		if (codec->beep &&
@@ -4082,7 +4256,7 @@ static int stac92xx_init(struct hda_codec *codec)
 			unsigned int pinctl, conf;
 			if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) {
 				/* for mic pins, force to initialize */
-				pinctl = stac92xx_get_vref(codec, nid);
+				pinctl = stac92xx_get_default_vref(codec, nid);
 				pinctl |= AC_PINCTL_IN_EN;
 				stac92xx_auto_set_pinctl(codec, nid, pinctl);
 			} else {
@@ -4535,17 +4709,19 @@ static int stac92xx_resume(struct hda_codec *codec)
 	return 0;
 }
 
-
 /*
- * using power check for controlling mute led of HP HDX notebooks
+ * using power check for controlling mute led of HP notebooks
  * check for mute state only on Speakers (nid = 0x10)
  *
  * For this feature CONFIG_SND_HDA_POWER_SAVE is needed, otherwise
  * the LED is NOT working properly !
+ *
+ * Changed name to reflect that it now works for any designated
+ * model, not just HP HDX.
  */
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
-static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec,
+static int stac92xx_hp_check_power_status(struct hda_codec *codec,
 					      hda_nid_t nid)
 {
 	struct sigmatel_spec *spec = codec->spec;
@@ -4553,9 +4729,9 @@ static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec,
 	if (nid == 0x10) {
 		if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
 		    HDA_AMP_MUTE)
-			spec->gpio_data &= ~0x08;  /* orange */
+			spec->gpio_data &= ~spec->gpio_led; /* orange */
 		else
-			spec->gpio_data |= 0x08;   /* white */
+			spec->gpio_data |= spec->gpio_led; /* white */
 
 		stac_gpio_set(codec, spec->gpio_mask,
 			      spec->gpio_dir,
@@ -5201,6 +5377,15 @@ again:
 	if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
 		snd_hda_sequence_write_cache(codec, unmute_init);
 
+	/* Some HP machines seem to have unstable codec communications
+	 * especially with ATI fglrx driver.  For recovering from the
+	 * CORB/RIRB stall, allow the BUS reset and keep always sync
+	 */
+	if (spec->board_config == STAC_HP_DV5) {
+		codec->bus->sync_write = 1;
+		codec->bus->allow_bus_reset = 1;
+	}
+
 	spec->aloopback_ctl = stac92hd71bxx_loopback;
 	spec->aloopback_mask = 0x50;
 	spec->aloopback_shift = 0;
@@ -5234,6 +5419,15 @@ again:
 		spec->num_smuxes = 0;
 		spec->num_dmuxes = 1;
 		break;
+	case STAC_HP_DV4_1222NR:
+		spec->num_dmics = 1;
+		/* I don't know if it needs 1 or 2 smuxes - will wait for
+		 * bug reports to fix if needed
+		 */
+		spec->num_smuxes = 1;
+		spec->num_dmuxes = 1;
+		spec->gpio_led = 0x01;
+		/* fallthrough */
 	case STAC_HP_DV5:
 		snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
 		stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
@@ -5242,22 +5436,21 @@ again:
 		spec->num_dmics = 1;
 		spec->num_dmuxes = 1;
 		spec->num_smuxes = 1;
-		/*
-		 * For controlling MUTE LED on HP HDX16/HDX18 notebooks,
-		 * the CONFIG_SND_HDA_POWER_SAVE is needed to be set.
-		 */
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 		/* orange/white mute led on GPIO3, orange=0, white=1 */
-		spec->gpio_mask |= 0x08;
-		spec->gpio_dir  |= 0x08;
-		spec->gpio_data |= 0x08;  /* set to white */
+		spec->gpio_led = 0x08;
+		break;
+	}
 
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	if (spec->gpio_led) {
+		spec->gpio_mask |= spec->gpio_led;
+		spec->gpio_dir |= spec->gpio_led;
+		spec->gpio_data |= spec->gpio_led;
 		/* register check_power_status callback. */
 		codec->patch_ops.check_power_status =
-		    stac92xx_hp_hdx_check_power_status;
+			stac92xx_hp_check_power_status;
+	}
 #endif	
-		break;
-	};
 
 	spec->multiout.dac_nids = spec->dac_nids;
 	if (spec->dinput_mux)
@@ -5282,7 +5475,7 @@ again:
 	codec->proc_widget_hook = stac92hd7x_proc_hook;
 
 	return 0;
-};
+}
 
 static int patch_stac922x(struct hda_codec *codec)
 {
@@ -5437,7 +5630,7 @@ static int patch_stac927x(struct hda_codec *codec)
 			/* correct the device field to SPDIF out */
 			snd_hda_codec_set_pincfg(codec, 0x21, 0x01442070);
 			break;
-		};
+		}
 		/* configure the analog microphone on some laptops */
 		snd_hda_codec_set_pincfg(codec, 0x0c, 0x90a79130);
 		/* correct the front output jack as a hp out */
@@ -5747,6 +5940,7 @@ static struct hda_codec_preset snd_hda_preset_sigmatel[] = {
  	{ .id = 0x83847661, .name = "CXD9872RD/K", .patch = patch_stac9872 },
  	{ .id = 0x83847662, .name = "STAC9872AK", .patch = patch_stac9872 },
  	{ .id = 0x83847664, .name = "CXD9872AKD", .patch = patch_stac9872 },
+	{ .id = 0x83847698, .name = "STAC9205", .patch = patch_stac9205 },
  	{ .id = 0x838476a0, .name = "STAC9205", .patch = patch_stac9205 },
  	{ .id = 0x838476a1, .name = "STAC9205D", .patch = patch_stac9205 },
  	{ .id = 0x838476a2, .name = "STAC9204", .patch = patch_stac9205 },
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index b25a5cc637d..8e004fb6961 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -205,7 +205,7 @@ struct via_spec {
 
 	/* playback */
 	struct hda_multi_out multiout;
-	hda_nid_t extra_dig_out_nid;
+	hda_nid_t slave_dig_outs[2];
 
 	/* capture */
 	unsigned int num_adc_nids;
@@ -731,21 +731,6 @@ static int via_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
-/* setup SPDIF output stream */
-static void setup_dig_playback_stream(struct hda_codec *codec, hda_nid_t nid,
-				 unsigned int stream_tag, unsigned int format)
-{
-	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
-	if (codec->spdif_ctls & AC_DIG1_ENABLE)
-		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				    codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
-	snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
-	/* turn on again (if needed) */
-	if (codec->spdif_ctls & AC_DIG1_ENABLE)
-		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				    codec->spdif_ctls & 0xff);
-}
-
 static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
@@ -753,19 +738,16 @@ static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					struct snd_pcm_substream *substream)
 {
 	struct via_spec *spec = codec->spec;
-	hda_nid_t nid;
-
-	/* 1st or 2nd S/PDIF */
-	if (substream->number == 0)
-		nid = spec->multiout.dig_out_nid;
-	else if (substream->number == 1)
-		nid = spec->extra_dig_out_nid;
-	else
-		return -1;
+	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+					     stream_tag, format, substream);
+}
 
-	mutex_lock(&codec->spdif_mutex);
-	setup_dig_playback_stream(codec, nid, stream_tag, format);
-	mutex_unlock(&codec->spdif_mutex);
+static int via_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct via_spec *spec = codec->spec;
+	snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
 	return 0;
 }
 
@@ -842,7 +824,8 @@ static struct hda_pcm_stream vt1708_pcm_digital_playback = {
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -874,13 +857,6 @@ static int via_build_controls(struct hda_codec *codec)
 		if (err < 0)
 			return err;
 		spec->multiout.share_spdif = 1;
-
-		if (spec->extra_dig_out_nid) {
-			err = snd_hda_create_spdif_out_ctls(codec,
-						    spec->extra_dig_out_nid);
-			if (err < 0)
-				return err;
-		}
 	}
 	if (spec->dig_in_nid) {
 		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
@@ -1013,10 +989,6 @@ static void via_unsol_event(struct hda_codec *codec,
 		via_gpio_control(codec);
 }
 
-static hda_nid_t slave_dig_outs[] = {
-	0,
-};
-
 static int via_init(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
@@ -1051,8 +1023,9 @@ static int via_init(struct hda_codec *codec)
 		snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0,
 				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN);
 
-	/* no slave outs */
-	codec->slave_dig_outs = slave_dig_outs;
+	/* assign slave outs */
+	if (spec->slave_dig_outs[0])
+		codec->slave_dig_outs = spec->slave_dig_outs;
 
  	return 0;
 }
@@ -2134,7 +2107,8 @@ static struct hda_pcm_stream vt1708B_pcm_digital_playback = {
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -2589,14 +2563,15 @@ static struct hda_pcm_stream vt1708S_pcm_analog_capture = {
 };
 
 static struct hda_pcm_stream vt1708S_pcm_digital_playback = {
-	.substreams = 2,
+	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
 	/* NID is set in via_build_pcms */
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -2805,14 +2780,37 @@ static int vt1708S_auto_create_analog_input_ctls(struct via_spec *spec,
 	return 0;
 }
 
+/* fill out digital output widgets; one for master and one for slave outputs */
+static void fill_dig_outs(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int i;
+
+	for (i = 0; i < spec->autocfg.dig_outs; i++) {
+		hda_nid_t nid;
+		int conn;
+
+		nid = spec->autocfg.dig_out_pins[i];
+		if (!nid)
+			continue;
+		conn = snd_hda_get_connections(codec, nid, &nid, 1);
+		if (conn < 1)
+			continue;
+		if (!spec->multiout.dig_out_nid)
+			spec->multiout.dig_out_nid = nid;
+		else {
+			spec->slave_dig_outs[0] = nid;
+			break; /* at most two dig outs */
+		}
+	}
+}
+
 static int vt1708S_parse_auto_config(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
 	int err;
-	static hda_nid_t vt1708s_ignore[] = {0x21, 0};
 
-	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
-					   vt1708s_ignore);
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
 	if (err < 0)
 		return err;
 	err = vt1708S_auto_fill_dac_nids(spec, &spec->autocfg);
@@ -2833,10 +2831,7 @@ static int vt1708S_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID;
-
-	spec->extra_dig_out_nid = 0x15;
+	fill_dig_outs(codec);
 
 	if (spec->kctls.list)
 		spec->mixers[spec->num_mixers++] = spec->kctls.list;
@@ -3000,7 +2995,8 @@ static struct hda_pcm_stream vt1702_pcm_digital_playback = {
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -3128,10 +3124,8 @@ static int vt1702_parse_auto_config(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
 	int err;
-	static hda_nid_t vt1702_ignore[] = {0x1C, 0};
 
-	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
-					   vt1702_ignore);
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
 	if (err < 0)
 		return err;
 	err = vt1702_auto_fill_dac_nids(spec, &spec->autocfg);
@@ -3152,10 +3146,7 @@ static int vt1702_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = VT1702_DIGOUT_NID;
-
-	spec->extra_dig_out_nid = 0x1B;
+	fill_dig_outs(codec);
 
 	if (spec->kctls.list)
 		spec->mixers[spec->num_mixers++] = spec->kctls.list;
diff --git a/sound/pci/ice1712/Makefile b/sound/pci/ice1712/Makefile
index f99fe089495..536eae2ccf9 100644
--- a/sound/pci/ice1712/Makefile
+++ b/sound/pci/ice1712/Makefile
@@ -5,7 +5,7 @@
 
 snd-ice17xx-ak4xxx-objs := ak4xxx.o
 snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o
-snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o
+snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index fdae6deba16..adc909ec125 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -335,6 +335,7 @@ struct snd_ice1712 {
 	unsigned int force_rdma1:1;	/* VT1720/4 - RDMA1 as non-spdif */
 	unsigned int midi_output:1;	/* VT1720/4: MIDI output triggered */
 	unsigned int midi_input:1;	/* VT1720/4: MIDI input triggered */
+	unsigned int own_routing:1;	/* VT1720/4: use own routing ctls */
 	unsigned int num_total_dacs;	/* total DACs */
 	unsigned int num_total_adcs;	/* total ADCs */
 	unsigned int cur_rate;		/* current rate */
@@ -458,10 +459,17 @@ static inline int snd_ice1712_gpio_read_bits(struct snd_ice1712 *ice,
 	return  snd_ice1712_gpio_read(ice) & mask;
 }
 
+/* route access functions */
+int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift);
+int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
+								int shift);
+
 int snd_ice1712_spdif_build_controls(struct snd_ice1712 *ice);
 
-int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak, const struct snd_akm4xxx *template,
-			     const struct snd_ak4xxx_private *priv, struct snd_ice1712 *ice);
+int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak,
+			     const struct snd_akm4xxx *template,
+			     const struct snd_ak4xxx_private *priv,
+			     struct snd_ice1712 *ice);
 void snd_ice1712_akm4xxx_free(struct snd_ice1712 *ice);
 int snd_ice1712_akm4xxx_build_controls(struct snd_ice1712 *ice);
 
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 128510e77a7..36ade77cf37 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -49,6 +49,7 @@
 #include "prodigy192.h"
 #include "prodigy_hifi.h"
 #include "juli.h"
+#include "maya44.h"
 #include "phase.h"
 #include "wtm.h"
 #include "se.h"
@@ -65,6 +66,7 @@ MODULE_SUPPORTED_DEVICE("{"
 	       PRODIGY192_DEVICE_DESC
 	       PRODIGY_HIFI_DEVICE_DESC
 	       JULI_DEVICE_DESC
+	       MAYA44_DEVICE_DESC
 	       PHASE_DEVICE_DESC
 	       WTM_DEVICE_DESC
 	       SE_DEVICE_DESC
@@ -626,7 +628,7 @@ static unsigned char stdclock_set_mclk(struct snd_ice1712 *ice,
 	return 0;
 }
 
-static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
+static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 				    int force)
 {
 	unsigned long flags;
@@ -634,17 +636,18 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 	unsigned int i, old_rate;
 
 	if (rate > ice->hw_rates->list[ice->hw_rates->count - 1])
-		return;
+		return -EINVAL;
+
 	spin_lock_irqsave(&ice->reg_lock, flags);
 	if ((inb(ICEMT1724(ice, DMA_CONTROL)) & DMA_STARTS) ||
 	    (inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
 		/* running? we cannot change the rate now... */
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return -EBUSY;
 	}
 	if (!force && is_pro_rate_locked(ice)) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return (rate == ice->cur_rate) ? 0 : -EBUSY;
 	}
 
 	old_rate = ice->get_rate(ice);
@@ -652,7 +655,7 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 		ice->set_rate(ice, rate);
 	else if (rate == ice->cur_rate) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return 0;
 	}
 
 	ice->cur_rate = rate;
@@ -674,13 +677,15 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 	}
 	if (ice->spdif.ops.setup_rate)
 		ice->spdif.ops.setup_rate(ice, rate);
+
+	return 0;
 }
 
 static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *hw_params)
 {
 	struct snd_ice1712 *ice = snd_pcm_substream_chip(substream);
-	int i, chs;
+	int i, chs, err;
 
 	chs = params_channels(hw_params);
 	mutex_lock(&ice->open_mutex);
@@ -715,7 +720,11 @@ static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 	mutex_unlock(&ice->open_mutex);
-	snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
+
+	err = snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
+	if (err < 0)
+		return err;
+
 	return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
 }
 
@@ -848,20 +857,39 @@ static snd_pcm_uframes_t snd_vt1724_pcm_pointer(struct snd_pcm_substream *substr
 #endif
 }
 
-static const struct vt1724_pcm_reg vt1724_playback_pro_reg = {
+static const struct vt1724_pcm_reg vt1724_pdma0_reg = {
 	.addr = VT1724_MT_PLAYBACK_ADDR,
 	.size = VT1724_MT_PLAYBACK_SIZE,
 	.count = VT1724_MT_PLAYBACK_COUNT,
 	.start = VT1724_PDMA0_START,
 };
 
-static const struct vt1724_pcm_reg vt1724_capture_pro_reg = {
+static const struct vt1724_pcm_reg vt1724_pdma4_reg = {
+	.addr = VT1724_MT_PDMA4_ADDR,
+	.size = VT1724_MT_PDMA4_SIZE,
+	.count = VT1724_MT_PDMA4_COUNT,
+	.start = VT1724_PDMA4_START,
+};
+
+static const struct vt1724_pcm_reg vt1724_rdma0_reg = {
 	.addr = VT1724_MT_CAPTURE_ADDR,
 	.size = VT1724_MT_CAPTURE_SIZE,
 	.count = VT1724_MT_CAPTURE_COUNT,
 	.start = VT1724_RDMA0_START,
 };
 
+static const struct vt1724_pcm_reg vt1724_rdma1_reg = {
+	.addr = VT1724_MT_RDMA1_ADDR,
+	.size = VT1724_MT_RDMA1_SIZE,
+	.count = VT1724_MT_RDMA1_COUNT,
+	.start = VT1724_RDMA1_START,
+};
+
+#define vt1724_playback_pro_reg vt1724_pdma0_reg
+#define vt1724_playback_spdif_reg vt1724_pdma4_reg
+#define vt1724_capture_pro_reg vt1724_rdma0_reg
+#define vt1724_capture_spdif_reg vt1724_rdma1_reg
+
 static const struct snd_pcm_hardware snd_vt1724_playback_pro = {
 	.info =			(SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 				 SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -1077,20 +1105,6 @@ static int __devinit snd_vt1724_pcm_profi(struct snd_ice1712 *ice, int device)
  * SPDIF PCM
  */
 
-static const struct vt1724_pcm_reg vt1724_playback_spdif_reg = {
-	.addr = VT1724_MT_PDMA4_ADDR,
-	.size = VT1724_MT_PDMA4_SIZE,
-	.count = VT1724_MT_PDMA4_COUNT,
-	.start = VT1724_PDMA4_START,
-};
-
-static const struct vt1724_pcm_reg vt1724_capture_spdif_reg = {
-	.addr = VT1724_MT_RDMA1_ADDR,
-	.size = VT1724_MT_RDMA1_SIZE,
-	.count = VT1724_MT_RDMA1_COUNT,
-	.start = VT1724_RDMA1_START,
-};
-
 /* update spdif control bits; call with reg_lock */
 static void update_spdif_bits(struct snd_ice1712 *ice, unsigned int val)
 {
@@ -1963,7 +1977,7 @@ static inline int digital_route_shift(int idx)
 	return idx * 3;
 }
 
-static int get_route_val(struct snd_ice1712 *ice, int shift)
+int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift)
 {
 	unsigned long val;
 	unsigned char eitem;
@@ -1982,7 +1996,8 @@ static int get_route_val(struct snd_ice1712 *ice, int shift)
 	return eitem;
 }
 
-static int put_route_val(struct snd_ice1712 *ice, unsigned int val, int shift)
+int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
+								int shift)
 {
 	unsigned int old_val, nval;
 	int change;
@@ -2010,7 +2025,7 @@ static int snd_vt1724_pro_route_analog_get(struct snd_kcontrol *kcontrol,
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	ucontrol->value.enumerated.item[0] =
-		get_route_val(ice, analog_route_shift(idx));
+		snd_ice1724_get_route_val(ice, analog_route_shift(idx));
 	return 0;
 }
 
@@ -2019,8 +2034,9 @@ static int snd_vt1724_pro_route_analog_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	return put_route_val(ice, ucontrol->value.enumerated.item[0],
-			     analog_route_shift(idx));
+	return snd_ice1724_put_route_val(ice,
+					 ucontrol->value.enumerated.item[0],
+					 analog_route_shift(idx));
 }
 
 static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
@@ -2029,7 +2045,7 @@ static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	ucontrol->value.enumerated.item[0] =
-		get_route_val(ice, digital_route_shift(idx));
+		snd_ice1724_get_route_val(ice, digital_route_shift(idx));
 	return 0;
 }
 
@@ -2038,11 +2054,13 @@ static int snd_vt1724_pro_route_spdif_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	return put_route_val(ice, ucontrol->value.enumerated.item[0],
-			     digital_route_shift(idx));
+	return snd_ice1724_put_route_val(ice,
+					 ucontrol->value.enumerated.item[0],
+					 digital_route_shift(idx));
 }
 
-static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata =
+{
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "H/W Playback Route",
 	.info = snd_vt1724_pro_route_info,
@@ -2109,6 +2127,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = {
 	snd_vt1724_prodigy_hifi_cards,
 	snd_vt1724_prodigy192_cards,
 	snd_vt1724_juli_cards,
+	snd_vt1724_maya44_cards,
 	snd_vt1724_phase_cards,
 	snd_vt1724_wtm_cards,
 	snd_vt1724_se_cards,
@@ -2246,8 +2265,10 @@ static int __devinit snd_vt1724_read_eeprom(struct snd_ice1712 *ice,
 static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice)
 {
 	outb(VT1724_RESET , ICEREG1724(ice, CONTROL));
+	inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
 	msleep(10);
 	outb(0, ICEREG1724(ice, CONTROL));
+	inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
 	msleep(10);
 }
 
@@ -2277,9 +2298,12 @@ static int __devinit snd_vt1724_spdif_build_controls(struct snd_ice1712 *ice)
 	if (snd_BUG_ON(!ice->pcm))
 		return -EIO;
 
-	err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
-	if (err < 0)
-		return err;
+	if (!ice->own_routing) {
+		err = snd_ctl_add(ice->card,
+			snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
+		if (err < 0)
+			return err;
+	}
 
 	err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_spdif_switch, ice));
 	if (err < 0)
@@ -2326,7 +2350,7 @@ static int __devinit snd_vt1724_build_controls(struct snd_ice1712 *ice)
 	if (err < 0)
 		return err;
 
-	if (ice->num_total_dacs > 0) {
+	if (!ice->own_routing && ice->num_total_dacs > 0) {
 		struct snd_kcontrol_new tmp = snd_vt1724_mixer_pro_analog_route;
 		tmp.count = ice->num_total_dacs;
 		if (ice->vt1720 && tmp.count > 2)
diff --git a/sound/pci/ice1712/maya44.c b/sound/pci/ice1712/maya44.c
new file mode 100644
index 00000000000..3e1c20ae2f1
--- /dev/null
+++ b/sound/pci/ice1712/maya44.c
@@ -0,0 +1,779 @@
+/*
+ *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ *   Lowlevel functions for ESI Maya44 cards
+ *
+ *	Copyright (c) 2009 Takashi Iwai <tiwai@suse.de>
+ *	Based on the patches by Rainer Zimmermann <mail@lightshed.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/tlv.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "maya44.h"
+
+/* WM8776 register indexes */
+#define WM8776_REG_HEADPHONE_L		0x00
+#define WM8776_REG_HEADPHONE_R		0x01
+#define WM8776_REG_HEADPHONE_MASTER	0x02
+#define WM8776_REG_DAC_ATTEN_L		0x03
+#define WM8776_REG_DAC_ATTEN_R		0x04
+#define WM8776_REG_DAC_ATTEN_MASTER	0x05
+#define WM8776_REG_DAC_PHASE		0x06
+#define WM8776_REG_DAC_CONTROL		0x07
+#define WM8776_REG_DAC_MUTE		0x08
+#define WM8776_REG_DAC_DEEMPH		0x09
+#define WM8776_REG_DAC_IF_CONTROL	0x0a
+#define WM8776_REG_ADC_IF_CONTROL	0x0b
+#define WM8776_REG_MASTER_MODE_CONTROL	0x0c
+#define WM8776_REG_POWERDOWN		0x0d
+#define WM8776_REG_ADC_ATTEN_L		0x0e
+#define WM8776_REG_ADC_ATTEN_R		0x0f
+#define WM8776_REG_ADC_ALC1		0x10
+#define WM8776_REG_ADC_ALC2		0x11
+#define WM8776_REG_ADC_ALC3		0x12
+#define WM8776_REG_ADC_NOISE_GATE	0x13
+#define WM8776_REG_ADC_LIMITER		0x14
+#define WM8776_REG_ADC_MUX		0x15
+#define WM8776_REG_OUTPUT_MUX		0x16
+#define WM8776_REG_RESET		0x17
+
+#define WM8776_NUM_REGS			0x18
+
+/* clock ratio identifiers for snd_wm8776_set_rate() */
+#define WM8776_CLOCK_RATIO_128FS	0
+#define WM8776_CLOCK_RATIO_192FS	1
+#define WM8776_CLOCK_RATIO_256FS	2
+#define WM8776_CLOCK_RATIO_384FS	3
+#define WM8776_CLOCK_RATIO_512FS	4
+#define WM8776_CLOCK_RATIO_768FS	5
+
+enum { WM_VOL_HP, WM_VOL_DAC, WM_VOL_ADC, WM_NUM_VOLS };
+enum { WM_SW_DAC, WM_SW_BYPASS, WM_NUM_SWITCHES };
+
+struct snd_wm8776 {
+	unsigned char addr;
+	unsigned short regs[WM8776_NUM_REGS];
+	unsigned char volumes[WM_NUM_VOLS][2];
+	unsigned int switch_bits;
+};
+
+struct snd_maya44 {
+	struct snd_ice1712 *ice;
+	struct snd_wm8776 wm[2];
+	struct mutex mutex;
+};
+
+
+/* write the given register and save the data to the cache */
+static void wm8776_write(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
+			 unsigned char reg, unsigned short val)
+{
+	/*
+	 * WM8776 registers are up to 9 bits wide, bit 8 is placed in the LSB
+	 * of the address field
+	 */
+	snd_vt1724_write_i2c(ice, wm->addr,
+			     (reg << 1) | ((val >> 8) & 1),
+			     val & 0xff);
+	wm->regs[reg] = val;
+}
+
+/*
+ * update the given register with and/or mask and save the data to the cache
+ */
+static int wm8776_write_bits(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
+			     unsigned char reg,
+			     unsigned short mask, unsigned short val)
+{
+	val |= wm->regs[reg] & ~mask;
+	if (val != wm->regs[reg]) {
+		wm8776_write(ice, wm, reg, val);
+		return 1;
+	}
+	return 0;
+}
+
+
+/*
+ * WM8776 volume controls
+ */
+
+struct maya_vol_info {
+	unsigned int maxval;		/* volume range: 0..maxval */
+	unsigned char regs[2];		/* left and right registers */
+	unsigned short mask;		/* value mask */
+	unsigned short offset;		/* zero-value offset */
+	unsigned short mute;		/* mute bit */
+	unsigned short update;		/* update bits */
+	unsigned char mux_bits[2];	/* extra bits for ADC mute */
+};
+
+static struct maya_vol_info vol_info[WM_NUM_VOLS] = {
+	[WM_VOL_HP] = {
+		.maxval = 80,
+		.regs = { WM8776_REG_HEADPHONE_L, WM8776_REG_HEADPHONE_R },
+		.mask = 0x7f,
+		.offset = 0x30,
+		.mute = 0x00,
+		.update = 0x180,	/* update and zero-cross enable */
+	},
+	[WM_VOL_DAC] = {
+		.maxval = 255,
+		.regs = { WM8776_REG_DAC_ATTEN_L, WM8776_REG_DAC_ATTEN_R },
+		.mask = 0xff,
+		.offset = 0x01,
+		.mute = 0x00,
+		.update = 0x100,	/* zero-cross enable */
+	},
+	[WM_VOL_ADC] = {
+		.maxval = 91,
+		.regs = { WM8776_REG_ADC_ATTEN_L, WM8776_REG_ADC_ATTEN_R },
+		.mask = 0xff,
+		.offset = 0xa5,
+		.mute = 0xa5,
+		.update = 0x100,	/* update */
+		.mux_bits = { 0x80, 0x40 }, /* ADCMUX bits */
+	},
+};
+
+/*
+ * dB tables
+ */
+/* headphone output: mute, -73..+6db (1db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_hp, -7400, 100, 1);
+/* DAC output: mute, -127..0db (0.5db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_dac, -12750, 50, 1);
+/* ADC gain: mute, -21..+24db (0.5db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_adc, -2100, 50, 1);
+
+static int maya_vol_info(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_info *uinfo)
+{
+	unsigned int idx = kcontrol->private_value;
+	struct maya_vol_info *vol = &vol_info[idx];
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = vol->maxval;
+	return 0;
+}
+
+static int maya_vol_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = kcontrol->private_value;
+
+	mutex_lock(&chip->mutex);
+	ucontrol->value.integer.value[0] = wm->volumes[idx][0];
+	ucontrol->value.integer.value[1] = wm->volumes[idx][1];
+	mutex_unlock(&chip->mutex);
+	return 0;
+}
+
+static int maya_vol_put(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = kcontrol->private_value;
+	struct maya_vol_info *vol = &vol_info[idx];
+	unsigned int val, data;
+	int ch, changed = 0;
+
+	mutex_lock(&chip->mutex);
+	for (ch = 0; ch < 2; ch++) {
+		val = ucontrol->value.integer.value[ch];
+		if (val > vol->maxval)
+			val = vol->maxval;
+		if (val == wm->volumes[idx][ch])
+			continue;
+		if (!val)
+			data = vol->mute;
+		else
+			data = (val - 1) + vol->offset;
+		data |= vol->update;
+		changed |= wm8776_write_bits(chip->ice, wm, vol->regs[ch],
+					     vol->mask | vol->update, data);
+		if (vol->mux_bits[ch])
+			wm8776_write_bits(chip->ice, wm, WM8776_REG_ADC_MUX,
+					  vol->mux_bits[ch],
+					  val ? 0 : vol->mux_bits[ch]);
+		wm->volumes[idx][ch] = val;
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * WM8776 switch controls
+ */
+
+#define COMPOSE_SW_VAL(idx, reg, mask)	((idx) | ((reg) << 8) | ((mask) << 16))
+#define GET_SW_VAL_IDX(val)	((val) & 0xff)
+#define GET_SW_VAL_REG(val)	(((val) >> 8) & 0xff)
+#define GET_SW_VAL_MASK(val)	(((val) >> 16) & 0xff)
+
+#define maya_sw_info	snd_ctl_boolean_mono_info
+
+static int maya_sw_get(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
+
+	ucontrol->value.integer.value[0] = (wm->switch_bits >> idx) & 1;
+	return 0;
+}
+
+static int maya_sw_put(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
+	unsigned int mask, val;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	mask = 1 << idx;
+	wm->switch_bits &= ~mask;
+	val = ucontrol->value.integer.value[0];
+	if (val)
+		wm->switch_bits |= mask;
+	mask = GET_SW_VAL_MASK(kcontrol->private_value);
+	changed = wm8776_write_bits(chip->ice, wm,
+				    GET_SW_VAL_REG(kcontrol->private_value),
+				    mask, val ? mask : 0);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * GPIO pins (known ones for maya44)
+ */
+#define GPIO_PHANTOM_OFF	2
+#define GPIO_MIC_RELAY		4
+#define GPIO_SPDIF_IN_INV	5
+#define GPIO_MUST_BE_0		7
+
+/*
+ * GPIO switch controls
+ */
+
+#define COMPOSE_GPIO_VAL(shift, inv)	((shift) | ((inv) << 8))
+#define GET_GPIO_VAL_SHIFT(val)		((val) & 0xff)
+#define GET_GPIO_VAL_INV(val)		(((val) >> 8) & 1)
+
+static int maya_set_gpio_bits(struct snd_ice1712 *ice, unsigned int mask,
+			      unsigned int bits)
+{
+	unsigned int data;
+	data = snd_ice1712_gpio_read(ice);
+	if ((data & mask) == bits)
+		return 0;
+	snd_ice1712_gpio_write(ice, (data & ~mask) | bits);
+	return 1;
+}
+
+#define maya_gpio_sw_info	snd_ctl_boolean_mono_info
+
+static int maya_gpio_sw_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
+	unsigned int val;
+
+	val = (snd_ice1712_gpio_read(chip->ice) >> shift) & 1;
+	if (GET_GPIO_VAL_INV(kcontrol->private_value))
+		val = !val;
+	ucontrol->value.integer.value[0] = val;
+	return 0;
+}
+
+static int maya_gpio_sw_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
+	unsigned int val, mask;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	mask = 1 << shift;
+	val = ucontrol->value.integer.value[0];
+	if (GET_GPIO_VAL_INV(kcontrol->private_value))
+		val = !val;
+	val = val ? mask : 0;
+	changed = maya_set_gpio_bits(chip->ice, mask, val);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * capture source selection
+ */
+
+/* known working input slots (0-4) */
+#define MAYA_LINE_IN	1	/* in-2 */
+#define MAYA_MIC_IN	4	/* in-5 */
+
+static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line)
+{
+	wm8776_write_bits(chip->ice, &chip->wm[idx], WM8776_REG_ADC_MUX,
+			  0x1f, 1 << line);
+}
+
+static int maya_rec_src_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = { "Line", "Mic" };
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+	       texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int maya_rec_src_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int sel;
+
+	if (snd_ice1712_gpio_read(chip->ice) & (1 << GPIO_MIC_RELAY))
+		sel = 1;
+	else
+		sel = 0;
+	ucontrol->value.enumerated.item[0] = sel;
+	return 0;
+}
+
+static int maya_rec_src_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int sel = ucontrol->value.enumerated.item[0];
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	changed = maya_set_gpio_bits(chip->ice, GPIO_MIC_RELAY,
+				     sel ? GPIO_MIC_RELAY : 0);
+	wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * Maya44 routing switch settings have different meanings than the standard
+ * ice1724 switches as defined in snd_vt1724_pro_route_info (ice1724.c).
+ */
+static int maya_pb_route_info(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = {
+		"PCM Out", /* 0 */
+		"Input 1", "Input 2", "Input 3", "Input 4"
+	};
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+	       texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int maya_pb_route_shift(int idx)
+{
+	static const unsigned char shift[10] =
+		{ 8, 20, 0, 3, 11, 23, 14, 26, 17, 29 };
+	return shift[idx % 10];
+}
+
+static int maya_pb_route_get(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+	ucontrol->value.enumerated.item[0] =
+		snd_ice1724_get_route_val(chip->ice, maya_pb_route_shift(idx));
+	return 0;
+}
+
+static int maya_pb_route_put(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+	return snd_ice1724_put_route_val(chip->ice,
+					 ucontrol->value.enumerated.item[0],
+					 maya_pb_route_shift(idx));
+}
+
+
+/*
+ * controls to be added
+ */
+
+static struct snd_kcontrol_new maya_controls[] __devinitdata = {
+	{
+		.name = "Crossmix Playback Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_hp },
+		.private_value = WM_VOL_HP,
+		.count = 2,
+	},
+	{
+		.name = "PCM Playback Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_dac },
+		.private_value = WM_VOL_DAC,
+		.count = 2,
+	},
+	{
+		.name = "Line Capture Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_adc },
+		.private_value = WM_VOL_ADC,
+		.count = 2,
+	},
+	{
+		.name = "PCM Playback Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_sw_info,
+		.get = maya_sw_get,
+		.put = maya_sw_put,
+		.private_value = COMPOSE_SW_VAL(WM_SW_DAC,
+						WM8776_REG_OUTPUT_MUX, 0x01),
+		.count = 2,
+	},
+	{
+		.name = "Bypass Playback Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_sw_info,
+		.get = maya_sw_get,
+		.put = maya_sw_put,
+		.private_value = COMPOSE_SW_VAL(WM_SW_BYPASS,
+						WM8776_REG_OUTPUT_MUX, 0x04),
+		.count = 2,
+	},
+	{
+		.name = "Capture Source",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_rec_src_info,
+		.get = maya_rec_src_get,
+		.put = maya_rec_src_put,
+	},
+	{
+		.name = "Mic Phantom Power Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_gpio_sw_info,
+		.get = maya_gpio_sw_get,
+		.put = maya_gpio_sw_put,
+		.private_value = COMPOSE_GPIO_VAL(GPIO_PHANTOM_OFF, 1),
+	},
+	{
+		.name = "SPDIF Capture Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_gpio_sw_info,
+		.get = maya_gpio_sw_get,
+		.put = maya_gpio_sw_put,
+		.private_value = COMPOSE_GPIO_VAL(GPIO_SPDIF_IN_INV, 1),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "H/W Playback Route",
+		.info = maya_pb_route_info,
+		.get = maya_pb_route_get,
+		.put = maya_pb_route_put,
+		.count = 4,  /* FIXME: do controls 5-9 have any meaning? */
+	},
+};
+
+static int __devinit maya44_add_controls(struct snd_ice1712 *ice)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(maya_controls); i++) {
+		err = snd_ctl_add(ice->card, snd_ctl_new1(&maya_controls[i],
+							  ice->spec));
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+
+
+/*
+ * initialize a wm8776 chip
+ */
+static void __devinit wm8776_init(struct snd_ice1712 *ice,
+				  struct snd_wm8776 *wm, unsigned int addr)
+{
+	static const unsigned short inits_wm8776[] = {
+		0x02, 0x100, /* R2: headphone L+R muted + update */
+		0x05, 0x100, /* R5: DAC output L+R muted + update */
+		0x06, 0x000, /* R6: DAC output phase normal */
+		0x07, 0x091, /* R7: DAC enable zero cross detection,
+				normal output */
+		0x08, 0x000, /* R8: DAC soft mute off */
+		0x09, 0x000, /* R9: no deemph, DAC zero detect disabled */
+		0x0a, 0x022, /* R10: DAC I2C mode, std polarities, 24bit */
+		0x0b, 0x022, /* R11: ADC I2C mode, std polarities, 24bit,
+				highpass filter enabled */
+		0x0c, 0x042, /* R12: ADC+DAC slave, ADC+DAC 44,1kHz */
+		0x0d, 0x000, /* R13: all power up */
+		0x0e, 0x100, /* R14: ADC left muted,
+				enable zero cross detection */
+		0x0f, 0x100, /* R15: ADC right muted,
+				enable zero cross detection */
+			     /* R16: ALC...*/
+		0x11, 0x000, /* R17: disable ALC */
+			     /* R18: ALC...*/
+			     /* R19: noise gate...*/
+		0x15, 0x000, /* R21: ADC input mux init, mute all inputs */
+		0x16, 0x001, /* R22: output mux, select DAC */
+		0xff, 0xff
+	};
+
+	const unsigned short *ptr;
+	unsigned char reg;
+	unsigned short data;
+
+	wm->addr = addr;
+	/* enable DAC output; mute bypass, aux & all inputs */
+	wm->switch_bits = (1 << WM_SW_DAC);
+
+	ptr = inits_wm8776;
+	while (*ptr != 0xff) {
+		reg = *ptr++;
+		data = *ptr++;
+		wm8776_write(ice, wm, reg, data);
+	}
+}
+
+
+/*
+ * change the rate on the WM8776 codecs.
+ * this assumes that the VT17xx's rate is changed by the calling function.
+ * NOTE: even though the WM8776's are running in slave mode and rate
+ * selection is automatic, we need to call snd_wm8776_set_rate() here
+ * to make sure some flags are set correctly.
+ */
+static void set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+	struct snd_maya44 *chip = ice->spec;
+	unsigned int ratio, adc_ratio, val;
+	int i;
+
+	switch (rate) {
+	case 192000:
+		ratio = WM8776_CLOCK_RATIO_128FS;
+		break;
+	case 176400:
+		ratio = WM8776_CLOCK_RATIO_128FS;
+		break;
+	case 96000:
+		ratio = WM8776_CLOCK_RATIO_256FS;
+		break;
+	case 88200:
+		ratio = WM8776_CLOCK_RATIO_384FS;
+		break;
+	case 48000:
+		ratio = WM8776_CLOCK_RATIO_512FS;
+		break;
+	case 44100:
+		ratio = WM8776_CLOCK_RATIO_512FS;
+		break;
+	case 32000:
+		ratio = WM8776_CLOCK_RATIO_768FS;
+		break;
+	case 0:
+		/* no hint - S/PDIF input is master, simply return */
+		return;
+	default:
+		snd_BUG();
+		return;
+	}
+
+	/*
+	 * this currently sets the same rate for ADC and DAC, but limits
+	 * ADC rate to 256X (96kHz). For 256X mode (96kHz), this sets ADC
+	 * oversampling to 64x, as recommended by WM8776 datasheet.
+	 * Setting the rate is not really necessary in slave mode.
+	 */
+	adc_ratio = ratio;
+	if (adc_ratio < WM8776_CLOCK_RATIO_256FS)
+		adc_ratio = WM8776_CLOCK_RATIO_256FS;
+
+	val = adc_ratio;
+	if (adc_ratio == WM8776_CLOCK_RATIO_256FS)
+		val |= 8;
+	val |= ratio << 4;
+
+	mutex_lock(&chip->mutex);
+	for (i = 0; i < 2; i++)
+		wm8776_write_bits(ice, &chip->wm[i],
+				  WM8776_REG_MASTER_MODE_CONTROL,
+				  0x180, val);
+	mutex_unlock(&chip->mutex);
+}
+
+/*
+ * supported sample rates (to override the default one)
+ */
+
+static unsigned int rates[] = {
+	32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000
+};
+
+/* playback rates: 32..192 kHz */
+static struct snd_pcm_hw_constraint_list dac_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list = rates,
+	.mask = 0
+};
+
+
+/*
+ * chip addresses on I2C bus
+ */
+static unsigned char wm8776_addr[2] __devinitdata = {
+	0x34, 0x36, /* codec 0 & 1 */
+};
+
+/*
+ * initialize the chip
+ */
+static int __devinit maya44_init(struct snd_ice1712 *ice)
+{
+	int i;
+	struct snd_maya44 *chip;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	mutex_init(&chip->mutex);
+	chip->ice = ice;
+	ice->spec = chip;
+
+	/* initialise codecs */
+	ice->num_total_dacs = 4;
+	ice->num_total_adcs = 4;
+	ice->akm_codecs = 0;
+
+	for (i = 0; i < 2; i++) {
+		wm8776_init(ice, &chip->wm[i], wm8776_addr[i]);
+		wm8776_select_input(chip, i, MAYA_LINE_IN);
+	}
+
+	/* set card specific rates */
+	ice->hw_rates = &dac_rates;
+
+	/* register change rate notifier */
+	ice->gpio.set_pro_rate = set_rate;
+
+	/* RDMA1 (2nd input channel) is used for ADC by default */
+	ice->force_rdma1 = 1;
+
+	/* have an own routing control */
+	ice->own_routing = 1;
+
+	return 0;
+}
+
+
+/*
+ * Maya44 boards don't provide the EEPROM data except for the vendor IDs.
+ * hence the driver needs to sets up it properly.
+ */
+
+static unsigned char maya44_eeprom[] __devinitdata = {
+	[ICE_EEP2_SYSCONF]     = 0x45,
+		/* clock xin1=49.152MHz, mpu401, 2 stereo ADCs+DACs */
+	[ICE_EEP2_ACLINK]      = 0x80,
+		/* I2S */
+	[ICE_EEP2_I2S]         = 0xf8,
+		/* vol, 96k, 24bit, 192k */
+	[ICE_EEP2_SPDIF]       = 0xc3,
+		/* enable spdif out, spdif out supp, spdif-in, ext spdif out */
+	[ICE_EEP2_GPIO_DIR]    = 0xff,
+	[ICE_EEP2_GPIO_DIR1]   = 0xff,
+	[ICE_EEP2_GPIO_DIR2]   = 0xff,
+	[ICE_EEP2_GPIO_MASK]   = 0/*0x9f*/,
+	[ICE_EEP2_GPIO_MASK1]  = 0/*0xff*/,
+	[ICE_EEP2_GPIO_MASK2]  = 0/*0x7f*/,
+	[ICE_EEP2_GPIO_STATE]  = (1 << GPIO_PHANTOM_OFF) |
+			(1 << GPIO_SPDIF_IN_INV),
+	[ICE_EEP2_GPIO_STATE1] = 0x00,
+	[ICE_EEP2_GPIO_STATE2] = 0x00,
+};
+
+/* entry point */
+struct snd_ice1712_card_info snd_vt1724_maya44_cards[] __devinitdata = {
+	{
+		.subvendor = VT1724_SUBDEVICE_MAYA44,
+		.name = "ESI Maya44",
+		.model = "maya44",
+		.chip_init = maya44_init,
+		.build_controls = maya44_add_controls,
+		.eeprom_size = sizeof(maya44_eeprom),
+		.eeprom_data = maya44_eeprom,
+	},
+	{ } /* terminator */
+};
diff --git a/sound/pci/ice1712/maya44.h b/sound/pci/ice1712/maya44.h
new file mode 100644
index 00000000000..eafd03a8f4b
--- /dev/null
+++ b/sound/pci/ice1712/maya44.h
@@ -0,0 +1,10 @@
+#ifndef __SOUND_MAYA44_H
+#define __SOUND_MAYA44_H
+
+#define MAYA44_DEVICE_DESC		"{ESI,Maya44},"
+
+#define VT1724_SUBDEVICE_MAYA44		0x34315441	/* Maya44 */
+
+extern struct snd_ice1712_card_info  snd_vt1724_maya44_cards[];
+
+#endif	/* __SOUND_MAYA44_H */
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 173bebf9f51..8aa5687f392 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -356,8 +356,6 @@ struct ichdev {
         unsigned int position;
 	unsigned int pos_shift;
 	unsigned int last_pos;
-	unsigned long last_pos_jiffies;
-	unsigned int jiffy_to_bytes;
         int frags;
         int lvi;
         int lvi_frag;
@@ -844,7 +842,6 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ICH_IOCE | ICH_STARTBM;
 		ichdev->last_pos = ichdev->position;
-		ichdev->last_pos_jiffies = jiffies;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		ichdev->suspended = 1;
@@ -1048,7 +1045,6 @@ static int snd_intel8x0_pcm_prepare(struct snd_pcm_substream *substream)
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
-	ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
 	return 0;
 }
 
@@ -1073,19 +1069,23 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs
 		    ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
+	ptr = ichdev->last_pos;
 	if (ptr1 != 0) {
 		ptr1 <<= ichdev->pos_shift;
 		ptr = ichdev->fragsize1 - ptr1;
 		ptr += position;
-		ichdev->last_pos = ptr;
-		ichdev->last_pos_jiffies = jiffies;
-	} else {
-		ptr1 = jiffies - ichdev->last_pos_jiffies;
-		if (ptr1)
-			ptr1 -= 1;
-		ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
-		ptr %= ichdev->size;
+		if (ptr < ichdev->last_pos) {
+			unsigned int pos_base, last_base;
+			pos_base = position / ichdev->fragsize1;
+			last_base = ichdev->last_pos / ichdev->fragsize1;
+			/* another sanity check; ptr1 can go back to full
+			 * before the base position is updated
+			 */
+			if (pos_base == last_base)
+				ptr = ichdev->last_pos;
+		}
 	}
+	ichdev->last_pos = ptr;
 	spin_unlock(&chip->reg_lock);
 	if (ptr >= ichdev->size)
 		return 0;
diff --git a/sound/pci/lx6464es/Makefile b/sound/pci/lx6464es/Makefile
new file mode 100644
index 00000000000..eb04a6c73d8
--- /dev/null
+++ b/sound/pci/lx6464es/Makefile
@@ -0,0 +1,2 @@
+snd-lx6464es-objs := lx6464es.o lx_core.o
+obj-$(CONFIG_SND_LX6464ES) += snd-lx6464es.o
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
new file mode 100644
index 00000000000..ccf1b38c88e
--- /dev/null
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -0,0 +1,1159 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ *
+ * Copyright (c) 2008, 2009 Tim Blechmann <tim@klingt.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <sound/initval.h>
+#include <sound/control.h>
+#include <sound/info.h>
+
+#include "lx6464es.h"
+
+MODULE_AUTHOR("Tim Blechmann");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("digigram lx6464es");
+MODULE_SUPPORTED_DEVICE("{digigram lx6464es{}}");
+
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Digigram LX6464ES interface.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for  Digigram LX6464ES interface.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable/disable specific Digigram LX6464ES soundcards.");
+
+static const char card_name[] = "LX6464ES";
+
+
+#define PCI_DEVICE_ID_PLX_LX6464ES		PCI_DEVICE_ID_PLX_9056
+
+static struct pci_device_id snd_lx6464es_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
+	  .subvendor = PCI_VENDOR_ID_DIGIGRAM,
+	  .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM
+	},			/* LX6464ES */
+	{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
+	  .subvendor = PCI_VENDOR_ID_DIGIGRAM,
+	  .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM
+	},			/* LX6464ES-CAE */
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, snd_lx6464es_ids);
+
+
+
+/* PGO pour USERo dans le registre pci_0x06/loc_0xEC */
+#define CHIPSC_RESET_XILINX (1L<<16)
+
+
+/* alsa callbacks */
+static struct snd_pcm_hardware lx_caps = {
+	.info             = (SNDRV_PCM_INFO_MMAP |
+			     SNDRV_PCM_INFO_INTERLEAVED |
+			     SNDRV_PCM_INFO_MMAP_VALID |
+			     SNDRV_PCM_INFO_SYNC_START),
+	.formats	  = (SNDRV_PCM_FMTBIT_S16_LE |
+			     SNDRV_PCM_FMTBIT_S16_BE |
+			     SNDRV_PCM_FMTBIT_S24_3LE |
+			     SNDRV_PCM_FMTBIT_S24_3BE),
+	.rates            = (SNDRV_PCM_RATE_CONTINUOUS |
+			     SNDRV_PCM_RATE_8000_192000),
+	.rate_min         = 8000,
+	.rate_max         = 192000,
+	.channels_min     = 2,
+	.channels_max     = 64,
+	.buffer_bytes_max = 64*2*3*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER,
+	.period_bytes_min = (2*2*MICROBLAZE_IBL_MIN*2),
+	.period_bytes_max = (4*64*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER),
+	.periods_min      = 2,
+	.periods_max      = MAX_STREAM_BUFFER,
+};
+
+static int lx_set_granularity(struct lx6464es *chip, u32 gran);
+
+
+static int lx_hardware_open(struct lx6464es *chip,
+			    struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int channels = runtime->channels;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_pcm_uframes_t period_size = runtime->period_size;
+
+	snd_printd(LXP "allocating pipe for %d channels\n", channels);
+	err = lx_pipe_allocate(chip, 0, is_capture, channels);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "allocating pipe failed\n");
+		return err;
+	}
+
+	err = lx_set_granularity(chip, period_size);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "setting granularity to %ld failed\n",
+			   period_size);
+		return err;
+	}
+
+	return 0;
+}
+
+static int lx_hardware_start(struct lx6464es *chip,
+			     struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "setting stream format\n");
+	err = lx_stream_set_format(chip, runtime, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "setting stream format failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "starting pipe\n");
+	err = lx_pipe_start(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "starting pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "waiting for pipe to start\n");
+	err = lx_pipe_wait_for_start(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "waiting for pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_hardware_stop(struct lx6464es *chip,
+			    struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "pausing pipe\n");
+	err = lx_pipe_pause(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "pausing pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "waiting for pipe to become idle\n");
+	err = lx_pipe_wait_for_idle(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "waiting for pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "stopping pipe\n");
+	err = lx_pipe_stop(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(LXP "stopping pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_hardware_close(struct lx6464es *chip,
+			     struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "releasing pipe\n");
+	err = lx_pipe_release(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(LXP "releasing pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err = 0;
+	int board_rate;
+
+	snd_printdd("->lx_pcm_open\n");
+	mutex_lock(&chip->setup_mutex);
+
+	/* copy the struct snd_pcm_hardware struct */
+	runtime->hw = lx_caps;
+
+#if 0
+	/* buffer-size should better be multiple of period-size */
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
+		goto exit;
+	}
+#endif
+
+	/* the clock rate cannot be changed */
+	board_rate = chip->board_sample_rate;
+	err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE,
+					   board_rate, board_rate);
+
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
+		goto exit;
+	}
+
+	/* constrain period size */
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					   MICROBLAZE_IBL_MIN,
+					   MICROBLAZE_IBL_MAX);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP
+			   "could not constrain period size\n");
+		goto exit;
+	}
+
+	snd_pcm_hw_constraint_step(runtime, 0,
+				   SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 32);
+
+	snd_pcm_set_sync(substream);
+	err = 0;
+
+exit:
+	runtime->private_data = chip;
+
+	mutex_unlock(&chip->setup_mutex);
+	snd_printdd("<-lx_pcm_open, %d\n", err);
+	return err;
+}
+
+static int lx_pcm_close(struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	snd_printdd("->lx_pcm_close\n");
+	return err;
+}
+
+static snd_pcm_uframes_t lx_pcm_stream_pointer(struct snd_pcm_substream
+					       *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_uframes_t pos;
+	unsigned long flags;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	struct lx_stream *lx_stream = is_capture ? &chip->capture_stream :
+		&chip->playback_stream;
+
+	snd_printdd("->lx_pcm_stream_pointer\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+	pos = lx_stream->frame_pos * substream->runtime->period_size;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	snd_printdd(LXP "stream_pointer at %ld\n", pos);
+	return pos;
+}
+
+static int lx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+	const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printdd("->lx_pcm_prepare\n");
+
+	mutex_lock(&chip->setup_mutex);
+
+	if (chip->hardware_running[is_capture]) {
+		err = lx_hardware_stop(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to stop hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		err = lx_hardware_close(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to close hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+	}
+
+	snd_printd(LXP "opening hardware\n");
+	err = lx_hardware_open(chip, substream);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "failed to open hardware. "
+			   "Error code %d\n", err);
+		goto exit;
+	}
+
+	err = lx_hardware_start(chip, substream);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "failed to start hardware. "
+			   "Error code %d\n", err);
+		goto exit;
+	}
+
+	chip->hardware_running[is_capture] = 1;
+
+	if (chip->board_sample_rate != substream->runtime->rate) {
+		if (!err)
+			chip->board_sample_rate = substream->runtime->rate;
+	}
+
+exit:
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static int lx_pcm_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *hw_params, int is_capture)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+
+	snd_printdd("->lx_pcm_hw_params\n");
+
+	mutex_lock(&chip->setup_mutex);
+
+	/* set dma buffer */
+	err = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+
+	if (is_capture)
+		chip->capture_stream.stream = substream;
+	else
+		chip->playback_stream.stream = substream;
+
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static int lx_pcm_hw_params_playback(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	return lx_pcm_hw_params(substream, hw_params, 0);
+}
+
+static int lx_pcm_hw_params_capture(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	return lx_pcm_hw_params(substream, hw_params, 1);
+}
+
+static int lx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printdd("->lx_pcm_hw_free\n");
+	mutex_lock(&chip->setup_mutex);
+
+	if (chip->hardware_running[is_capture]) {
+		err = lx_hardware_stop(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to stop hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		err = lx_hardware_close(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to close hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		chip->hardware_running[is_capture] = 0;
+	}
+
+	err = snd_pcm_lib_free_pages(substream);
+
+	if (is_capture)
+		chip->capture_stream.stream = 0;
+	else
+		chip->playback_stream.stream = 0;
+
+exit:
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static void lx_trigger_start(struct lx6464es *chip, struct lx_stream *lx_stream)
+{
+	struct snd_pcm_substream *substream = lx_stream->stream;
+	const int is_capture = lx_stream->is_capture;
+
+	int err;
+
+	const u32 channels = substream->runtime->channels;
+	const u32 bytes_per_frame = channels * 3;
+	const u32 period_size = substream->runtime->period_size;
+	const u32 periods = substream->runtime->periods;
+	const u32 period_bytes = period_size * bytes_per_frame;
+
+	dma_addr_t buf = substream->dma_buffer.addr;
+	int i;
+
+	u32 needed, freed;
+	u32 size_array[5];
+
+	for (i = 0; i != periods; ++i) {
+		u32 buffer_index = 0;
+
+		err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed,
+				    size_array);
+		snd_printdd(LXP "starting: needed %d, freed %d\n",
+			    needed, freed);
+
+		err = lx_buffer_give(chip, 0, is_capture, period_bytes,
+				     lower_32_bits(buf), upper_32_bits(buf),
+				     &buffer_index);
+
+		snd_printdd(LXP "starting: buffer index %x on %p (%d bytes)\n",
+			    buffer_index, (void *)buf, period_bytes);
+		buf += period_bytes;
+	}
+
+	err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array);
+	snd_printdd(LXP "starting: needed %d, freed %d\n", needed, freed);
+
+	snd_printd(LXP "starting: starting stream\n");
+	err = lx_stream_start(chip, 0, is_capture);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP "couldn't start stream\n");
+	else
+		lx_stream->status = LX_STREAM_STATUS_RUNNING;
+
+	lx_stream->frame_pos = 0;
+}
+
+static void lx_trigger_stop(struct lx6464es *chip, struct lx_stream *lx_stream)
+{
+	const int is_capture = lx_stream->is_capture;
+	int err;
+
+	snd_printd(LXP "stopping: stopping stream\n");
+	err = lx_stream_stop(chip, 0, is_capture);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP "couldn't stop stream\n");
+	else
+		lx_stream->status = LX_STREAM_STATUS_FREE;
+
+}
+
+static void lx_trigger_tasklet_dispatch_stream(struct lx6464es *chip,
+					       struct lx_stream *lx_stream)
+{
+	switch (lx_stream->status) {
+	case LX_STREAM_STATUS_SCHEDULE_RUN:
+		lx_trigger_start(chip, lx_stream);
+		break;
+
+	case LX_STREAM_STATUS_SCHEDULE_STOP:
+		lx_trigger_stop(chip, lx_stream);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void lx_trigger_tasklet(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	unsigned long flags;
+
+	snd_printdd("->lx_trigger_tasklet\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+	lx_trigger_tasklet_dispatch_stream(chip, &chip->capture_stream);
+	lx_trigger_tasklet_dispatch_stream(chip, &chip->playback_stream);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int lx_pcm_trigger_dispatch(struct lx6464es *chip,
+				   struct lx_stream *lx_stream, int cmd)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		lx_stream->status = LX_STREAM_STATUS_SCHEDULE_RUN;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		lx_stream->status = LX_STREAM_STATUS_SCHEDULE_STOP;
+		break;
+
+	default:
+		err = -EINVAL;
+		goto exit;
+	}
+	tasklet_schedule(&chip->trigger_tasklet);
+
+exit:
+	return err;
+}
+
+
+static int lx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	struct lx_stream *stream = is_capture ? &chip->capture_stream :
+		&chip->playback_stream;
+
+	snd_printdd("->lx_pcm_trigger\n");
+
+	return lx_pcm_trigger_dispatch(chip, stream, cmd);
+}
+
+static int snd_lx6464es_free(struct lx6464es *chip)
+{
+	snd_printdd("->snd_lx6464es_free\n");
+
+	lx_irq_disable(chip);
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, chip);
+
+	iounmap(chip->port_dsp_bar);
+	ioport_unmap(chip->port_plx_remapped);
+
+	pci_release_regions(chip->pci);
+	pci_disable_device(chip->pci);
+
+	kfree(chip);
+
+	return 0;
+}
+
+static int snd_lx6464es_dev_free(struct snd_device *device)
+{
+	return snd_lx6464es_free(device->device_data);
+}
+
+/* reset the dsp during initialization */
+static int __devinit lx_init_xilinx_reset(struct lx6464es *chip)
+{
+	int i;
+	u32 plx_reg = lx_plx_reg_read(chip, ePLX_CHIPSC);
+
+	snd_printdd("->lx_init_xilinx_reset\n");
+
+	/* activate reset of xilinx */
+	plx_reg &= ~CHIPSC_RESET_XILINX;
+
+	lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg);
+	msleep(1);
+
+	lx_plx_reg_write(chip, ePLX_MBOX3, 0);
+	msleep(1);
+
+	plx_reg |= CHIPSC_RESET_XILINX;
+	lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg);
+
+	/* deactivate reset of xilinx */
+	for (i = 0; i != 100; ++i) {
+		u32 reg_mbox3;
+		msleep(10);
+		reg_mbox3 = lx_plx_reg_read(chip, ePLX_MBOX3);
+		if (reg_mbox3) {
+			snd_printd(LXP "xilinx reset done\n");
+			snd_printdd(LXP "xilinx took %d loops\n", i);
+			break;
+		}
+	}
+
+	/* todo: add some error handling? */
+
+	/* clear mr */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	/* le xilinx ES peut ne pas etre encore pret, on attend. */
+	msleep(600);
+
+	return 0;
+}
+
+static int __devinit lx_init_xilinx_test(struct lx6464es *chip)
+{
+	u32 reg;
+
+	snd_printdd("->lx_init_xilinx_test\n");
+
+	/* TEST if we have access to Xilinx/MicroBlaze */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	reg = lx_dsp_reg_read(chip, eReg_CSM);
+
+	if (reg) {
+		snd_printk(KERN_ERR LXP "Problem: Reg_CSM %x.\n", reg);
+
+		/* PCI9056_SPACE0_REMAP */
+		lx_plx_reg_write(chip, ePLX_PCICR, 1);
+
+		reg = lx_dsp_reg_read(chip, eReg_CSM);
+		if (reg) {
+			snd_printk(KERN_ERR LXP "Error: Reg_CSM %x.\n", reg);
+			return -EAGAIN; /* seems to be appropriate */
+		}
+	}
+
+	snd_printd(LXP "Xilinx/MicroBlaze access test successful\n");
+
+	return 0;
+}
+
+/* initialize ethersound */
+static int __devinit lx_init_ethersound_config(struct lx6464es *chip)
+{
+	int i;
+	u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
+
+	u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+		(64 << IOCR_INPUTS_OFFSET) |
+		(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
+
+	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
+		| (default_conf_es & CONFES_WRITE_PART_MASK);
+
+	snd_printdd("->lx_init_ethersound\n");
+
+	chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
+
+	/*
+	 * write it to the card !
+	 * this actually kicks the ES xilinx, the first time since poweron.
+	 * the MAC address in the Reg_ADMACESMSB Reg_ADMACESLSB registers
+	 * is not ready before this is done, and the bit 2 in Reg_CSES is set.
+	 * */
+	lx_dsp_reg_write(chip, eReg_CONFES, conf_es);
+
+	for (i = 0; i != 1000; ++i) {
+		if (lx_dsp_reg_read(chip, eReg_CSES) & 4) {
+			snd_printd(LXP "ethersound initialized after %dms\n",
+				   i);
+			goto ethersound_initialized;
+		}
+		msleep(1);
+	}
+	snd_printk(KERN_WARNING LXP
+		   "ethersound could not be initialized after %dms\n", i);
+	return -ETIMEDOUT;
+
+ ethersound_initialized:
+	snd_printd(LXP "ethersound initialized\n");
+	return 0;
+}
+
+static int __devinit lx_init_get_version_features(struct lx6464es *chip)
+{
+	u32 dsp_version;
+
+	int err;
+
+	snd_printdd("->lx_init_get_version_features\n");
+
+	err = lx_dsp_get_version(chip, &dsp_version);
+
+	if (err == 0) {
+		u32 freq;
+
+		snd_printk(LXP "DSP version: V%02d.%02d #%d\n",
+			   (dsp_version>>16) & 0xff, (dsp_version>>8) & 0xff,
+			   dsp_version & 0xff);
+
+		/* later: what firmware version do we expect? */
+
+		/* retrieve Play/Rec features */
+		/* done here because we may have to handle alternate
+		 * DSP files. */
+		/* later */
+
+		/* init the EtherSound sample rate */
+		err = lx_dsp_get_clock_frequency(chip, &freq);
+		if (err == 0)
+			chip->board_sample_rate = freq;
+		snd_printd(LXP "actual clock frequency %d\n", freq);
+	} else {
+		snd_printk(KERN_ERR LXP "DSP corrupted \n");
+		err = -EAGAIN;
+	}
+
+	return err;
+}
+
+static int lx_set_granularity(struct lx6464es *chip, u32 gran)
+{
+	int err = 0;
+	u32 snapped_gran = MICROBLAZE_IBL_MIN;
+
+	snd_printdd("->lx_set_granularity\n");
+
+	/* blocksize is a power of 2 */
+	while ((snapped_gran < gran) &&
+	       (snapped_gran < MICROBLAZE_IBL_MAX)) {
+		snapped_gran *= 2;
+	}
+
+	if (snapped_gran == chip->pcm_granularity)
+		return 0;
+
+	err = lx_dsp_set_granularity(chip, snapped_gran);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not set granularity\n");
+		err = -EAGAIN;
+	}
+
+	if (snapped_gran != gran)
+		snd_printk(LXP "snapped blocksize to %d\n", snapped_gran);
+
+	snd_printd(LXP "set blocksize on board %d\n", snapped_gran);
+	chip->pcm_granularity = snapped_gran;
+
+	return err;
+}
+
+/* initialize and test the xilinx dsp chip */
+static int __devinit lx_init_dsp(struct lx6464es *chip)
+{
+	int err;
+	u8 mac_address[6];
+	int i;
+
+	snd_printdd("->lx_init_dsp\n");
+
+	snd_printd(LXP "initialize board\n");
+	err = lx_init_xilinx_reset(chip);
+	if (err)
+		return err;
+
+	snd_printd(LXP "testing board\n");
+	err = lx_init_xilinx_test(chip);
+	if (err)
+		return err;
+
+	snd_printd(LXP "initialize ethersound configuration\n");
+	err = lx_init_ethersound_config(chip);
+	if (err)
+		return err;
+
+	lx_irq_enable(chip);
+
+	/** \todo the mac address should be ready by not, but it isn't,
+	 *  so we wait for it */
+	for (i = 0; i != 1000; ++i) {
+		err = lx_dsp_get_mac(chip, mac_address);
+		if (err)
+			return err;
+		if (mac_address[0] || mac_address[1] || mac_address[2] ||
+		    mac_address[3] || mac_address[4] || mac_address[5])
+			goto mac_ready;
+		msleep(1);
+	}
+	return -ETIMEDOUT;
+
+mac_ready:
+	snd_printd(LXP "mac address ready read after: %dms\n", i);
+	snd_printk(LXP "mac address: %02X.%02X.%02X.%02X.%02X.%02X\n",
+		   mac_address[0], mac_address[1], mac_address[2],
+		   mac_address[3], mac_address[4], mac_address[5]);
+
+	err = lx_init_get_version_features(chip);
+	if (err)
+		return err;
+
+	lx_set_granularity(chip, MICROBLAZE_IBL_DEFAULT);
+
+	chip->playback_mute = 0;
+
+	return err;
+}
+
+static struct snd_pcm_ops lx_ops_playback = {
+	.open      = lx_pcm_open,
+	.close     = lx_pcm_close,
+	.ioctl     = snd_pcm_lib_ioctl,
+	.prepare   = lx_pcm_prepare,
+	.hw_params = lx_pcm_hw_params_playback,
+	.hw_free   = lx_pcm_hw_free,
+	.trigger   = lx_pcm_trigger,
+	.pointer   = lx_pcm_stream_pointer,
+};
+
+static struct snd_pcm_ops lx_ops_capture = {
+	.open      = lx_pcm_open,
+	.close     = lx_pcm_close,
+	.ioctl     = snd_pcm_lib_ioctl,
+	.prepare   = lx_pcm_prepare,
+	.hw_params = lx_pcm_hw_params_capture,
+	.hw_free   = lx_pcm_hw_free,
+	.trigger   = lx_pcm_trigger,
+	.pointer   = lx_pcm_stream_pointer,
+};
+
+static int __devinit lx_pcm_create(struct lx6464es *chip)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	u32 size = 64 *		     /* channels */
+		3 *		     /* 24 bit samples */
+		MAX_STREAM_BUFFER *  /* periods */
+		MICROBLAZE_IBL_MAX * /* frames per period */
+		2;		     /* duplex */
+
+	size = PAGE_ALIGN(size);
+
+	/* hardcoded device name & channel count */
+	err = snd_pcm_new(chip->card, (char *)card_name, 0,
+			  1, 1, &pcm);
+
+	pcm->private_data = chip;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &lx_ops_playback);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &lx_ops_capture);
+
+	pcm->info_flags = 0;
+	strcpy(pcm->name, card_name);
+
+	err = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+						    snd_dma_pci_data(chip->pci),
+						    size, size);
+	if (err < 0)
+		return err;
+
+	chip->pcm = pcm;
+	chip->capture_stream.is_capture = 1;
+
+	return 0;
+}
+
+static int lx_control_playback_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int lx_control_playback_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct lx6464es *chip = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = chip->playback_mute;
+	return 0;
+}
+
+static int lx_control_playback_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct lx6464es *chip = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+	int current_value = chip->playback_mute;
+
+	if (current_value != ucontrol->value.integer.value[0]) {
+		lx_level_unmute(chip, 0, !current_value);
+		chip->playback_mute = !current_value;
+		changed = 1;
+	}
+	return changed;
+}
+
+static struct snd_kcontrol_new lx_control_playback_switch __devinitdata = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "PCM Playback Switch",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value = 0,
+	.info = lx_control_playback_info,
+	.get = lx_control_playback_get,
+	.put = lx_control_playback_put
+};
+
+
+
+static void lx_proc_levels_read(struct snd_info_entry *entry,
+				struct snd_info_buffer *buffer)
+{
+	u32 levels[64];
+	int err;
+	int i, j;
+	struct lx6464es *chip = entry->private_data;
+
+	snd_iprintf(buffer, "capture levels:\n");
+	err = lx_level_peaks(chip, 1, 64, levels);
+	if (err < 0)
+		return;
+
+	for (i = 0; i != 8; ++i) {
+		for (j = 0; j != 8; ++j)
+			snd_iprintf(buffer, "%08x ", levels[i*8+j]);
+		snd_iprintf(buffer, "\n");
+	}
+
+	snd_iprintf(buffer, "\nplayback levels:\n");
+
+	err = lx_level_peaks(chip, 0, 64, levels);
+	if (err < 0)
+		return;
+
+	for (i = 0; i != 8; ++i) {
+		for (j = 0; j != 8; ++j)
+			snd_iprintf(buffer, "%08x ", levels[i*8+j]);
+		snd_iprintf(buffer, "\n");
+	}
+
+	snd_iprintf(buffer, "\n");
+}
+
+static int __devinit lx_proc_create(struct snd_card *card, struct lx6464es *chip)
+{
+	struct snd_info_entry *entry;
+	int err = snd_card_proc_new(card, "levels", &entry);
+	if (err < 0)
+		return err;
+
+	snd_info_set_text_ops(entry, chip, lx_proc_levels_read);
+	return 0;
+}
+
+
+static int __devinit snd_lx6464es_create(struct snd_card *card,
+					 struct pci_dev *pci,
+					 struct lx6464es **rchip)
+{
+	struct lx6464es *chip;
+	int err;
+
+	static struct snd_device_ops ops = {
+		.dev_free = snd_lx6464es_dev_free,
+	};
+
+	snd_printdd("->snd_lx6464es_create\n");
+
+	*rchip = NULL;
+
+	/* enable PCI device */
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	pci_set_master(pci);
+
+	/* check if we can restrict PCI DMA transfers to 32 bits */
+	err = pci_set_dma_mask(pci, DMA_32BIT_MASK);
+	if (err < 0) {
+		snd_printk(KERN_ERR "architecture does not support "
+			   "32bit PCI busmaster DMA\n");
+		pci_disable_device(pci);
+		return -ENXIO;
+	}
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL) {
+		err = -ENOMEM;
+		goto alloc_failed;
+	}
+
+	chip->card = card;
+	chip->pci = pci;
+	chip->irq = -1;
+
+	/* initialize synchronization structs */
+	spin_lock_init(&chip->lock);
+	spin_lock_init(&chip->msg_lock);
+	mutex_init(&chip->setup_mutex);
+	tasklet_init(&chip->trigger_tasklet, lx_trigger_tasklet,
+		     (unsigned long)chip);
+	tasklet_init(&chip->tasklet_capture, lx_tasklet_capture,
+		     (unsigned long)chip);
+	tasklet_init(&chip->tasklet_playback, lx_tasklet_playback,
+		     (unsigned long)chip);
+
+	/* request resources */
+	err = pci_request_regions(pci, card_name);
+	if (err < 0)
+		goto request_regions_failed;
+
+	/* plx port */
+	chip->port_plx = pci_resource_start(pci, 1);
+	chip->port_plx_remapped = ioport_map(chip->port_plx,
+					     pci_resource_len(pci, 1));
+
+	/* dsp port */
+	chip->port_dsp_bar = pci_ioremap_bar(pci, 2);
+
+	err = request_irq(pci->irq, lx_interrupt, IRQF_SHARED,
+			  card_name, chip);
+	if (err) {
+		snd_printk(KERN_ERR LXP "unable to grab IRQ %d\n", pci->irq);
+		goto request_irq_failed;
+	}
+	chip->irq = pci->irq;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (err < 0)
+		goto device_new_failed;
+
+	err = lx_init_dsp(chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "error during DSP initialization\n");
+		return err;
+	}
+
+	err = lx_pcm_create(chip);
+	if (err < 0)
+		return err;
+
+	err = lx_proc_create(card, chip);
+	if (err < 0)
+		return err;
+
+	err = snd_ctl_add(card, snd_ctl_new1(&lx_control_playback_switch,
+					     chip));
+	if (err < 0)
+		return err;
+
+	snd_card_set_dev(card, &pci->dev);
+
+	*rchip = chip;
+	return 0;
+
+device_new_failed:
+	free_irq(pci->irq, chip);
+
+request_irq_failed:
+	pci_release_regions(pci);
+
+request_regions_failed:
+	kfree(chip);
+
+alloc_failed:
+	pci_disable_device(pci);
+
+	return err;
+}
+
+static int __devinit snd_lx6464es_probe(struct pci_dev *pci,
+					const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct lx6464es *chip;
+	int err;
+
+	snd_printdd("->snd_lx6464es_probe\n");
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	if (err < 0)
+		return err;
+
+	err = snd_lx6464es_create(card, pci, &chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "error during snd_lx6464es_create\n");
+		goto out_free;
+	}
+
+	strcpy(card->driver, "lx6464es");
+	strcpy(card->shortname, "Digigram LX6464ES");
+	sprintf(card->longname, "%s at 0x%lx, 0x%p, irq %i",
+		card->shortname, chip->port_plx,
+		chip->port_dsp_bar, chip->irq);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto out_free;
+
+	snd_printdd(LXP "initialization successful\n");
+	pci_set_drvdata(pci, card);
+	dev++;
+	return 0;
+
+out_free:
+	snd_card_free(card);
+	return err;
+
+}
+
+static void __devexit snd_lx6464es_remove(struct pci_dev *pci)
+{
+	snd_card_free(pci_get_drvdata(pci));
+	pci_set_drvdata(pci, NULL);
+}
+
+
+static struct pci_driver driver = {
+	.name =     "Digigram LX6464ES",
+	.id_table = snd_lx6464es_ids,
+	.probe =    snd_lx6464es_probe,
+	.remove = __devexit_p(snd_lx6464es_remove),
+};
+
+
+/* module initialization */
+static int __init mod_init(void)
+{
+	return pci_register_driver(&driver);
+}
+
+static void __exit mod_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
diff --git a/sound/pci/lx6464es/lx6464es.h b/sound/pci/lx6464es/lx6464es.h
new file mode 100644
index 00000000000..012c010c8c8
--- /dev/null
+++ b/sound/pci/lx6464es/lx6464es.h
@@ -0,0 +1,114 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX6464ES_H
+#define LX6464ES_H
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "lx_core.h"
+
+#define LXP "LX6464ES: "
+
+enum {
+    ES_cmd_free         = 0,    /* no command executing */
+    ES_cmd_processing   = 1,	/* execution of a read/write command */
+    ES_read_pending     = 2,    /* a asynchron read command is pending */
+    ES_read_finishing   = 3,    /* a read command has finished waiting (set by
+				 * Interrupt or CancelIrp) */
+};
+
+enum lx_stream_status {
+	LX_STREAM_STATUS_FREE,
+/* 	LX_STREAM_STATUS_OPEN, */
+	LX_STREAM_STATUS_SCHEDULE_RUN,
+/* 	LX_STREAM_STATUS_STARTED, */
+	LX_STREAM_STATUS_RUNNING,
+	LX_STREAM_STATUS_SCHEDULE_STOP,
+/* 	LX_STREAM_STATUS_STOPPED, */
+/* 	LX_STREAM_STATUS_PAUSED */
+};
+
+
+struct lx_stream {
+	struct snd_pcm_substream  *stream;
+	snd_pcm_uframes_t          frame_pos;
+	enum lx_stream_status      status; /* free, open, running, draining
+					    * pause */
+	int                        is_capture:1;
+};
+
+
+struct lx6464es {
+	struct snd_card        *card;
+	struct pci_dev         *pci;
+	int			irq;
+
+	spinlock_t		lock;        /* interrupt spinlock */
+	struct mutex            setup_mutex; /* mutex used in hw_params, open
+					      * and close */
+
+	struct tasklet_struct   trigger_tasklet; /* trigger tasklet */
+	struct tasklet_struct   tasklet_capture;
+	struct tasklet_struct   tasklet_playback;
+
+	/* ports */
+	unsigned long		port_plx;	   /* io port (size=256) */
+	void __iomem           *port_plx_remapped; /* remapped plx port */
+	void __iomem           *port_dsp_bar;      /* memory port (32-bit,
+						    * non-prefetchable,
+						    * size=8K) */
+
+	/* messaging */
+	spinlock_t		msg_lock;          /* message spinlock */
+	atomic_t	        send_message_locked;
+	struct lx_rmh           rmh;
+
+	/* configuration */
+	uint			freq_ratio : 2;
+	uint                    playback_mute : 1;
+	uint                    hardware_running[2];
+	u32                     board_sample_rate; /* sample rate read from
+						    * board */
+	u32                     sample_rate;	   /* our sample rate */
+	u16                     pcm_granularity;   /* board blocksize */
+
+	/* dma */
+	struct snd_dma_buffer   capture_dma_buf;
+	struct snd_dma_buffer   playback_dma_buf;
+
+	/* pcm */
+	struct snd_pcm         *pcm;
+
+	/* streams */
+	struct lx_stream        capture_stream;
+	struct lx_stream        playback_stream;
+};
+
+
+#endif /* LX6464ES_H */
diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c
new file mode 100644
index 00000000000..5812780d6e8
--- /dev/null
+++ b/sound/pci/lx6464es/lx_core.c
@@ -0,0 +1,1444 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * low-level interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+/* #define RMH_DEBUG 1 */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "lx6464es.h"
+#include "lx_core.h"
+
+/* low-level register access */
+
+static const unsigned long dsp_port_offsets[] = {
+	0,
+	0x400,
+	0x401,
+	0x402,
+	0x403,
+	0x404,
+	0x405,
+	0x406,
+	0x407,
+	0x408,
+	0x409,
+	0x40a,
+	0x40b,
+	0x40c,
+
+	0x410,
+	0x411,
+	0x412,
+	0x413,
+	0x414,
+	0x415,
+	0x416,
+
+	0x420,
+	0x430,
+	0x431,
+	0x432,
+	0x433,
+	0x434,
+	0x440
+};
+
+static void __iomem *lx_dsp_register(struct lx6464es *chip, int port)
+{
+	void __iomem *base_address = chip->port_dsp_bar;
+	return base_address + dsp_port_offsets[port]*4;
+}
+
+unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	return ioread32(address);
+}
+
+void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	memcpy_fromio(data, address, len*sizeof(u32));
+}
+
+
+void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	iowrite32(data, address);
+}
+
+void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
+			 u32 len)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	memcpy_toio(address, data, len*sizeof(u32));
+}
+
+
+static const unsigned long plx_port_offsets[] = {
+	0x04,
+	0x40,
+	0x44,
+	0x48,
+	0x4c,
+	0x50,
+	0x54,
+	0x58,
+	0x5c,
+	0x64,
+	0x68,
+	0x6C
+};
+
+static void __iomem *lx_plx_register(struct lx6464es *chip, int port)
+{
+	void __iomem *base_address = chip->port_plx_remapped;
+	return base_address + plx_port_offsets[port];
+}
+
+unsigned long lx_plx_reg_read(struct lx6464es *chip, int port)
+{
+	void __iomem *address = lx_plx_register(chip, port);
+	return ioread32(address);
+}
+
+void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data)
+{
+	void __iomem *address = lx_plx_register(chip, port);
+	iowrite32(data, address);
+}
+
+u32 lx_plx_mbox_read(struct lx6464es *chip, int mbox_nr)
+{
+	int index;
+
+	switch (mbox_nr) {
+	case 1:
+		index = ePLX_MBOX1;    break;
+	case 2:
+		index = ePLX_MBOX2;    break;
+	case 3:
+		index = ePLX_MBOX3;    break;
+	case 4:
+		index = ePLX_MBOX4;    break;
+	case 5:
+		index = ePLX_MBOX5;    break;
+	case 6:
+		index = ePLX_MBOX6;    break;
+	case 7:
+		index = ePLX_MBOX7;    break;
+	case 0:			/* reserved for HF flags */
+		snd_BUG();
+	default:
+		return 0xdeadbeef;
+	}
+
+	return lx_plx_reg_read(chip, index);
+}
+
+int lx_plx_mbox_write(struct lx6464es *chip, int mbox_nr, u32 value)
+{
+	int index = -1;
+
+	switch (mbox_nr) {
+	case 1:
+		index = ePLX_MBOX1;    break;
+	case 3:
+		index = ePLX_MBOX3;    break;
+	case 4:
+		index = ePLX_MBOX4;    break;
+	case 5:
+		index = ePLX_MBOX5;    break;
+	case 6:
+		index = ePLX_MBOX6;    break;
+	case 7:
+		index = ePLX_MBOX7;    break;
+	case 0:			/* reserved for HF flags */
+	case 2:			/* reserved for Pipe States
+				 * the DSP keeps an image of it */
+		snd_BUG();
+		return -EBADRQC;
+	}
+
+	lx_plx_reg_write(chip, index, value);
+	return 0;
+}
+
+
+/* rmh */
+
+#ifdef CONFIG_SND_DEBUG
+#define CMD_NAME(a) a
+#else
+#define CMD_NAME(a) NULL
+#endif
+
+#define Reg_CSM_MR			0x00000002
+#define Reg_CSM_MC			0x00000001
+
+struct dsp_cmd_info {
+	u32    dcCodeOp;	/* Op Code of the command (usually 1st 24-bits
+				 * word).*/
+	u16    dcCmdLength;	/* Command length in words of 24 bits.*/
+	u16    dcStatusType;	/* Status type: 0 for fixed length, 1 for
+				 * random. */
+	u16    dcStatusLength;	/* Status length (if fixed).*/
+	char  *dcOpName;
+};
+
+/*
+  Initialization and control data for the Microblaze interface
+  - OpCode:
+    the opcode field of the command set at the proper offset
+  - CmdLength
+    the number of command words
+  - StatusType
+    offset in the status registers: 0 means that the return value may be
+    different from 0, and must be read
+  - StatusLength
+    the number of status words (in addition to the return value)
+*/
+
+static struct dsp_cmd_info dsp_commands[] =
+{
+	{ (CMD_00_INFO_DEBUG << OPCODE_OFFSET)			, 1 /*custom*/
+	  , 1	, 0 /**/		    , CMD_NAME("INFO_DEBUG") },
+	{ (CMD_01_GET_SYS_CFG << OPCODE_OFFSET) 		, 1 /**/
+	  , 1      , 2 /**/		    , CMD_NAME("GET_SYS_CFG") },
+	{ (CMD_02_SET_GRANULARITY << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_GRANULARITY") },
+	{ (CMD_03_SET_TIMER_IRQ << OPCODE_OFFSET)		, 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_TIMER_IRQ") },
+	{ (CMD_04_GET_EVENT << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 0 /*up to 10*/     , CMD_NAME("GET_EVENT") },
+	{ (CMD_05_GET_PIPES << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 2 /*up to 4*/      , CMD_NAME("GET_PIPES") },
+	{ (CMD_06_ALLOCATE_PIPE << OPCODE_OFFSET)		, 1 /**/
+	  , 0      , 0 /**/		    , CMD_NAME("ALLOCATE_PIPE") },
+	{ (CMD_07_RELEASE_PIPE << OPCODE_OFFSET)		, 1 /**/
+	  , 0      , 0 /**/		    , CMD_NAME("RELEASE_PIPE") },
+	{ (CMD_08_ASK_BUFFERS << OPCODE_OFFSET) 		, 1 /**/
+	  , 1      , MAX_STREAM_BUFFER  , CMD_NAME("ASK_BUFFERS") },
+	{ (CMD_09_STOP_PIPE << OPCODE_OFFSET)			, 1 /**/
+	  , 0      , 0 /*up to 2*/      , CMD_NAME("STOP_PIPE") },
+	{ (CMD_0A_GET_PIPE_SPL_COUNT << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 1 /*up to 2*/      , CMD_NAME("GET_PIPE_SPL_COUNT") },
+	{ (CMD_0B_TOGGLE_PIPE_STATE << OPCODE_OFFSET)           , 1 /*up to 5*/
+	  , 1      , 0 /**/		    , CMD_NAME("TOGGLE_PIPE_STATE") },
+	{ (CMD_0C_DEF_STREAM << OPCODE_OFFSET)			, 1 /*up to 4*/
+	  , 1      , 0 /**/		    , CMD_NAME("DEF_STREAM") },
+	{ (CMD_0D_SET_MUTE  << OPCODE_OFFSET)			, 3 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_MUTE") },
+	{ (CMD_0E_GET_STREAM_SPL_COUNT << OPCODE_OFFSET)        , 1/**/
+	  , 1      , 2 /**/		    , CMD_NAME("GET_STREAM_SPL_COUNT") },
+	{ (CMD_0F_UPDATE_BUFFER << OPCODE_OFFSET)		, 3 /*up to 4*/
+	  , 0      , 1 /**/		    , CMD_NAME("UPDATE_BUFFER") },
+	{ (CMD_10_GET_BUFFER << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 4 /**/		    , CMD_NAME("GET_BUFFER") },
+	{ (CMD_11_CANCEL_BUFFER << OPCODE_OFFSET)		, 1 /**/
+	  , 1      , 1 /*up to 4*/      , CMD_NAME("CANCEL_BUFFER") },
+	{ (CMD_12_GET_PEAK << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 1 /**/		    , CMD_NAME("GET_PEAK") },
+	{ (CMD_13_SET_STREAM_STATE << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_STREAM_STATE") },
+};
+
+static void lx_message_init(struct lx_rmh *rmh, enum cmd_mb_opcodes cmd)
+{
+	snd_BUG_ON(cmd >= CMD_14_INVALID);
+
+	rmh->cmd[0] = dsp_commands[cmd].dcCodeOp;
+	rmh->cmd_len = dsp_commands[cmd].dcCmdLength;
+	rmh->stat_len = dsp_commands[cmd].dcStatusLength;
+	rmh->dsp_stat = dsp_commands[cmd].dcStatusType;
+	rmh->cmd_idx = cmd;
+	memset(&rmh->cmd[1], 0, (REG_CRM_NUMBER - 1) * sizeof(u32));
+
+#ifdef CONFIG_SND_DEBUG
+	memset(rmh->stat, 0, REG_CRM_NUMBER * sizeof(u32));
+#endif
+#ifdef RMH_DEBUG
+	rmh->cmd_idx = cmd;
+#endif
+}
+
+#ifdef RMH_DEBUG
+#define LXRMH "lx6464es rmh: "
+static void lx_message_dump(struct lx_rmh *rmh)
+{
+	u8 idx = rmh->cmd_idx;
+	int i;
+
+	snd_printk(LXRMH "command %s\n", dsp_commands[idx].dcOpName);
+
+	for (i = 0; i != rmh->cmd_len; ++i)
+		snd_printk(LXRMH "\tcmd[%d] %08x\n", i, rmh->cmd[i]);
+
+	for (i = 0; i != rmh->stat_len; ++i)
+		snd_printk(LXRMH "\tstat[%d]: %08x\n", i, rmh->stat[i]);
+	snd_printk("\n");
+}
+#else
+static inline void lx_message_dump(struct lx_rmh *rmh)
+{}
+#endif
+
+
+
+/* sleep 500 - 100 = 400 times 100us -> the timeout is >= 40 ms */
+#define XILINX_TIMEOUT_MS       40
+#define XILINX_POLL_NO_SLEEP    100
+#define XILINX_POLL_ITERATIONS  150
+
+#if 0 /* not used now */
+static int lx_message_send(struct lx6464es *chip, struct lx_rmh *rmh)
+{
+	u32 reg = ED_DSP_TIMED_OUT;
+	int dwloop;
+	int answer_received;
+
+	if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) {
+		snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg);
+		return -EBUSY;
+	}
+
+	/* write command */
+	lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len);
+
+	snd_BUG_ON(atomic_read(&chip->send_message_locked) != 0);
+	atomic_set(&chip->send_message_locked, 1);
+
+	/* MicoBlaze gogogo */
+	lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC);
+
+	/* wait for interrupt to answer */
+	for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS; ++dwloop) {
+		answer_received = atomic_read(&chip->send_message_locked);
+		if (answer_received == 0)
+			break;
+		msleep(1);
+	}
+
+	if (answer_received == 0) {
+		/* in Debug mode verify Reg_CSM_MR */
+		snd_BUG_ON(!(lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR));
+
+		/* command finished, read status */
+		if (rmh->dsp_stat == 0)
+			reg = lx_dsp_reg_read(chip, eReg_CRM1);
+		else
+			reg = 0;
+	} else {
+		int i;
+		snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! "
+			   "Interrupts disabled?\n");
+
+		/* attente bit Reg_CSM_MR */
+		for (i = 0; i != XILINX_POLL_ITERATIONS; i++) {
+			if ((lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR)) {
+				if (rmh->dsp_stat == 0)
+					reg = lx_dsp_reg_read(chip, eReg_CRM1);
+				else
+					reg = 0;
+				goto polling_successful;
+			}
+
+			if (i > XILINX_POLL_NO_SLEEP)
+				msleep(1);
+		}
+		snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! "
+			   "polling failed\n");
+
+polling_successful:
+		atomic_set(&chip->send_message_locked, 0);
+	}
+
+	if ((reg & ERROR_VALUE) == 0) {
+		/* read response */
+		if (rmh->stat_len) {
+			snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1));
+
+			lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat,
+					   rmh->stat_len);
+		}
+	} else
+		snd_printk(KERN_WARNING LXP "lx_message_send: error_value %x\n",
+			   reg);
+
+	/* clear Reg_CSM_MR */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	switch (reg) {
+	case ED_DSP_TIMED_OUT:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n");
+		return -ETIMEDOUT;
+
+	case ED_DSP_CRASHED:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n");
+		return -EAGAIN;
+	}
+
+	lx_message_dump(rmh);
+	return 0;
+}
+#endif /* not used now */
+
+static int lx_message_send_atomic(struct lx6464es *chip, struct lx_rmh *rmh)
+{
+	u32 reg = ED_DSP_TIMED_OUT;
+	int dwloop;
+
+	if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) {
+		snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg);
+		return -EBUSY;
+	}
+
+	/* write command */
+	lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len);
+
+	/* MicoBlaze gogogo */
+	lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC);
+
+	/* wait for interrupt to answer */
+	for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS * 1000; ++dwloop) {
+		if (lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR) {
+			if (rmh->dsp_stat == 0)
+				reg = lx_dsp_reg_read(chip, eReg_CRM1);
+			else
+				reg = 0;
+			goto polling_successful;
+		} else
+			udelay(1);
+	}
+	snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send_atomic! "
+		   "polling failed\n");
+
+polling_successful:
+	if ((reg & ERROR_VALUE) == 0) {
+		/* read response */
+		if (rmh->stat_len) {
+			snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1));
+			lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat,
+					   rmh->stat_len);
+		}
+	} else
+		snd_printk(LXP "rmh error: %08x\n", reg);
+
+	/* clear Reg_CSM_MR */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	switch (reg) {
+	case ED_DSP_TIMED_OUT:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n");
+		return -ETIMEDOUT;
+
+	case ED_DSP_CRASHED:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n");
+		return -EAGAIN;
+	}
+
+	lx_message_dump(rmh);
+
+	return reg;
+}
+
+
+/* low-level dsp access */
+int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version)
+{
+	u16 ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG);
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	*rdsp_version = chip->rmh.stat[1];
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq)
+{
+	u16 ret = 0;
+	unsigned long flags;
+	u32 freq_raw = 0;
+	u32 freq = 0;
+	u32 frequency = 0;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG);
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (ret == 0) {
+		freq_raw = chip->rmh.stat[0] >> FREQ_FIELD_OFFSET;
+		freq = freq_raw & XES_FREQ_COUNT8_MASK;
+
+		if ((freq < XES_FREQ_COUNT8_48_MAX) ||
+		    (freq > XES_FREQ_COUNT8_44_MIN))
+			frequency = 0; /* unknown */
+		else if (freq >= XES_FREQ_COUNT8_44_MAX)
+			frequency = 44100;
+		else
+			frequency = 48000;
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	*rfreq = frequency * chip->freq_ratio;
+
+	return ret;
+}
+
+int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address)
+{
+	u32 macmsb, maclsb;
+
+	macmsb = lx_dsp_reg_read(chip, eReg_ADMACESMSB) & 0x00FFFFFF;
+	maclsb = lx_dsp_reg_read(chip, eReg_ADMACESLSB) & 0x00FFFFFF;
+
+	/* todo: endianess handling */
+	mac_address[5] = ((u8 *)(&maclsb))[0];
+	mac_address[4] = ((u8 *)(&maclsb))[1];
+	mac_address[3] = ((u8 *)(&maclsb))[2];
+	mac_address[2] = ((u8 *)(&macmsb))[0];
+	mac_address[1] = ((u8 *)(&macmsb))[1];
+	mac_address[0] = ((u8 *)(&macmsb))[2];
+
+	return 0;
+}
+
+
+int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_02_SET_GRANULARITY);
+	chip->rmh.cmd[0] |= gran;
+
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_04_GET_EVENT);
+	chip->rmh.stat_len = 9;	/* we don't necessarily need the full length */
+
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (!ret)
+		memcpy(data, chip->rmh.stat, chip->rmh.stat_len * sizeof(u32));
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+#define CSES_TIMEOUT        100     /* microseconds */
+#define CSES_CE             0x0001
+#define CSES_BROADCAST      0x0002
+#define CSES_UPDATE_LDSV    0x0004
+
+int lx_dsp_es_check_pipeline(struct lx6464es *chip)
+{
+	int i;
+
+	for (i = 0; i != CSES_TIMEOUT; ++i) {
+		/*
+		 * le bit CSES_UPDATE_LDSV est à 1 dés que le macprog
+		 * est pret. il re-passe à 0 lorsque le premier read a
+		 * été fait. pour l'instant on retire le test car ce bit
+		 * passe a 1 environ 200 à 400 ms aprés que le registre
+		 * confES à été écrit (kick du xilinx ES).
+		 *
+		 * On ne teste que le bit CE.
+		 * */
+
+		u32 cses = lx_dsp_reg_read(chip, eReg_CSES);
+
+		if ((cses & CSES_CE) == 0)
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+
+#define PIPE_INFO_TO_CMD(capture, pipe)					\
+	((u32)((u32)(pipe) | ((capture) ? ID_IS_CAPTURE : 0L)) << ID_OFFSET)
+
+
+
+/* low-level pipe handling */
+int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture,
+		     int channels)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_06_ALLOCATE_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= channels;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	if (err != 0)
+		snd_printk(KERN_ERR "lx6464es: could not allocate pipe\n");
+
+	return err;
+}
+
+int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_07_RELEASE_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture,
+		  u32 *r_needed, u32 *r_freed, u32 *size_array)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+#ifdef CONFIG_SND_DEBUG
+	if (size_array)
+		memset(size_array, 0, sizeof(u32)*MAX_STREAM_BUFFER);
+#endif
+
+	*r_needed = 0;
+	*r_freed = 0;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_08_ASK_BUFFERS);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (!err) {
+		int i;
+		for (i = 0; i < MAX_STREAM_BUFFER; ++i) {
+			u32 stat = chip->rmh.stat[i];
+			if (stat & (BF_EOB << BUFF_FLAGS_OFFSET)) {
+				/* finished */
+				*r_freed += 1;
+				if (size_array)
+					size_array[i] = stat & MASK_DATA_SIZE;
+			} else if ((stat & (BF_VALID << BUFF_FLAGS_OFFSET))
+				   == 0)
+				/* free */
+				*r_needed += 1;
+		}
+
+#if 0
+		snd_printdd(LXP "CMD_08_ASK_BUFFERS: needed %d, freed %d\n",
+			    *r_needed, *r_freed);
+		for (i = 0; i < MAX_STREAM_BUFFER; ++i) {
+			for (i = 0; i != chip->rmh.stat_len; ++i)
+				snd_printdd("  stat[%d]: %x, %x\n", i,
+					    chip->rmh.stat[i],
+					    chip->rmh.stat[i] & MASK_DATA_SIZE);
+		}
+#endif
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_09_STOP_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static int lx_pipe_toggle_state(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0B_TOGGLE_PIPE_STATE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+
+	err = lx_pipe_wait_for_idle(chip, pipe, is_capture);
+	if (err < 0)
+		return err;
+
+	err = lx_pipe_toggle_state(chip, pipe, is_capture);
+
+	return err;
+}
+
+int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err = 0;
+
+	err = lx_pipe_wait_for_start(chip, pipe, is_capture);
+	if (err < 0)
+		return err;
+
+	err = lx_pipe_toggle_state(chip, pipe, is_capture);
+
+	return err;
+}
+
+
+int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture,
+			 u64 *rsample_count)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.stat_len = 2;	/* need all words here! */
+
+	err = lx_message_send_atomic(chip, &chip->rmh); /* don't sleep! */
+
+	if (err != 0)
+		snd_printk(KERN_ERR
+			   "lx6464es: could not query pipe's sample count\n");
+	else {
+		*rsample_count = ((u64)(chip->rmh.stat[0] & MASK_SPL_COUNT_HI)
+				  << 24)     /* hi part */
+			+ chip->rmh.stat[1]; /* lo part */
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err != 0)
+		snd_printk(KERN_ERR "lx6464es: could not query pipe's state\n");
+	else
+		*rstate = (chip->rmh.stat[0] >> PSTATE_OFFSET) & 0x0F;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static int lx_pipe_wait_for_state(struct lx6464es *chip, u32 pipe,
+				  int is_capture, u16 state)
+{
+	int i;
+
+	/* max 2*PCMOnlyGranularity = 2*1024 at 44100 = < 50 ms:
+	 * timeout 50 ms */
+	for (i = 0; i != 50; ++i) {
+		u16 current_state;
+		int err = lx_pipe_state(chip, pipe, is_capture, &current_state);
+
+		if (err < 0)
+			return err;
+
+		if (current_state == state)
+			return 0;
+
+		mdelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_RUN);
+}
+
+int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_IDLE);
+}
+
+/* low-level stream handling */
+int lx_stream_set_state(struct lx6464es *chip, u32 pipe,
+			       int is_capture, enum stream_state_t state)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_13_SET_STREAM_STATE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= state;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime,
+			 u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	u32 channels = runtime->channels;
+
+	if (runtime->channels != channels)
+		snd_printk(KERN_ERR LXP "channel count mismatch: %d vs %d",
+			   runtime->channels, channels);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0C_DEF_STREAM);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	if (runtime->sample_bits == 16)
+		/* 16 bit format */
+		chip->rmh.cmd[0] |= (STREAM_FMT_16b << STREAM_FMT_OFFSET);
+
+	if (snd_pcm_format_little_endian(runtime->format))
+		/* little endian/intel format */
+		chip->rmh.cmd[0] |= (STREAM_FMT_intel << STREAM_FMT_OFFSET);
+
+	chip->rmh.cmd[0] |= channels-1;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture,
+		    int *rstate)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	*rstate = (chip->rmh.stat[0] & SF_START) ? START_STATE : PAUSE_STATE;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture,
+			      u64 *r_bytepos)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	*r_bytepos = ((u64) (chip->rmh.stat[0] & MASK_SPL_COUNT_HI)
+		      << 32)	     /* hi part */
+		+ chip->rmh.stat[1]; /* lo part */
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+/* low-level buffer handling */
+int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi,
+		   u32 *r_buffer_index)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0F_UPDATE_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= BF_NOTIFY_EOB; /* request interrupt notification */
+
+	/* todo: pause request, circular buffer */
+
+	chip->rmh.cmd[1] = buffer_size & MASK_DATA_SIZE;
+	chip->rmh.cmd[2] = buf_address_lo;
+
+	if (buf_address_hi) {
+		chip->rmh.cmd_len = 4;
+		chip->rmh.cmd[3] = buf_address_hi;
+		chip->rmh.cmd[0] |= BF_64BITS_ADR;
+	}
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err == 0) {
+		*r_buffer_index = chip->rmh.stat[0];
+		goto done;
+	}
+
+	if (err == EB_RBUFFERS_TABLE_OVERFLOW)
+		snd_printk(LXP "lx_buffer_give EB_RBUFFERS_TABLE_OVERFLOW\n");
+
+	if (err == EB_INVALID_STREAM)
+		snd_printk(LXP "lx_buffer_give EB_INVALID_STREAM\n");
+
+	if (err == EB_CMD_REFUSED)
+		snd_printk(LXP "lx_buffer_give EB_CMD_REFUSED\n");
+
+ done:
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 *r_buffer_size)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= MASK_BUFFER_ID; /* ask for the current buffer: the
+					     * microblaze will seek for it */
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err == 0)
+		*r_buffer_size = chip->rmh.stat[0]  & MASK_DATA_SIZE;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture,
+		     u32 buffer_index)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= buffer_index;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+/* low-level gain/peak handling
+ *
+ * \todo: can we unmute capture/playback channels independently?
+ *
+ * */
+int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute)
+{
+	int err;
+	unsigned long flags;
+
+	/* bit set to 1: channel muted */
+	u64 mute_mask = unmute ? 0 : 0xFFFFFFFFFFFFFFFFLLU;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0D_SET_MUTE);
+
+	chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, 0);
+
+	chip->rmh.cmd[1] = (u32)(mute_mask >> (u64)32);	       /* hi part */
+	chip->rmh.cmd[2] = (u32)(mute_mask & (u64)0xFFFFFFFF); /* lo part */
+
+	snd_printk("mute %x %x %x\n", chip->rmh.cmd[0], chip->rmh.cmd[1],
+		   chip->rmh.cmd[2]);
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static u32 peak_map[] = {
+	0x00000109, /* -90.308dB */
+	0x0000083B, /* -72.247dB */
+	0x000020C4, /* -60.205dB */
+	0x00008273, /* -48.030dB */
+	0x00020756, /* -36.005dB */
+	0x00040C37, /* -30.001dB */
+	0x00081385, /* -24.002dB */
+	0x00101D3F, /* -18.000dB */
+	0x0016C310, /* -15.000dB */
+	0x002026F2, /* -12.001dB */
+	0x002D6A86, /* -9.000dB */
+	0x004026E6, /* -6.004dB */
+	0x005A9DF6, /* -3.000dB */
+	0x0065AC8B, /* -2.000dB */
+	0x00721481, /* -1.000dB */
+	0x007FFFFF, /* FS */
+};
+
+int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels,
+		   u32 *r_levels)
+{
+	int err = 0;
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	for (i = 0; i < channels; i += 4) {
+		u32 s0, s1, s2, s3;
+
+		lx_message_init(&chip->rmh, CMD_12_GET_PEAK);
+		chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, i);
+
+		err = lx_message_send_atomic(chip, &chip->rmh);
+
+		if (err == 0) {
+			s0 = peak_map[chip->rmh.stat[0] & 0x0F];
+			s1 = peak_map[(chip->rmh.stat[0] >>  4) & 0xf];
+			s2 = peak_map[(chip->rmh.stat[0] >>  8) & 0xf];
+			s3 = peak_map[(chip->rmh.stat[0] >>  12) & 0xf];
+		} else
+			s0 = s1 = s2 = s3 = 0;
+
+		r_levels[0] = s0;
+		r_levels[1] = s1;
+		r_levels[2] = s2;
+		r_levels[3] = s3;
+
+		r_levels += 4;
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+/* interrupt handling */
+#define PCX_IRQ_NONE 0
+#define IRQCS_ACTIVE_PCIDB  0x00002000L         /* Bit nø 13 */
+#define IRQCS_ENABLE_PCIIRQ 0x00000100L         /* Bit nø 08 */
+#define IRQCS_ENABLE_PCIDB  0x00000200L         /* Bit nø 09 */
+
+static u32 lx_interrupt_test_ack(struct lx6464es *chip)
+{
+	u32 irqcs = lx_plx_reg_read(chip, ePLX_IRQCS);
+
+	/* Test if PCI Doorbell interrupt is active */
+	if (irqcs & IRQCS_ACTIVE_PCIDB)	{
+		u32 temp;
+		irqcs = PCX_IRQ_NONE;
+
+		while ((temp = lx_plx_reg_read(chip, ePLX_L2PCIDB))) {
+			/* RAZ interrupt */
+			irqcs |= temp;
+			lx_plx_reg_write(chip, ePLX_L2PCIDB, temp);
+		}
+
+		return irqcs;
+	}
+	return PCX_IRQ_NONE;
+}
+
+static int lx_interrupt_ack(struct lx6464es *chip, u32 *r_irqsrc,
+			    int *r_async_pending, int *r_async_escmd)
+{
+	u32 irq_async;
+	u32 irqsrc = lx_interrupt_test_ack(chip);
+
+	if (irqsrc == PCX_IRQ_NONE)
+		return 0;
+
+	*r_irqsrc = irqsrc;
+
+	irq_async = irqsrc & MASK_SYS_ASYNC_EVENTS; /* + EtherSound response
+						     * (set by xilinx) + EOB */
+
+	if (irq_async & MASK_SYS_STATUS_ESA) {
+		irq_async &= ~MASK_SYS_STATUS_ESA;
+		*r_async_escmd = 1;
+	}
+
+	if (irqsrc & MASK_SYS_STATUS_CMD_DONE)
+		/* xilinx command notification */
+		atomic_set(&chip->send_message_locked, 0);
+
+	if (irq_async) {
+		/* snd_printd("interrupt: async event pending\n"); */
+		*r_async_pending = 1;
+	}
+
+	return 1;
+}
+
+static int lx_interrupt_handle_async_events(struct lx6464es *chip, u32 irqsrc,
+					    int *r_freq_changed,
+					    u64 *r_notified_in_pipe_mask,
+					    u64 *r_notified_out_pipe_mask)
+{
+	int err;
+	u32 stat[9];		/* answer from CMD_04_GET_EVENT */
+
+	/* On peut optimiser pour ne pas lire les evenements vides
+	 * les mots de réponse sont dans l'ordre suivant :
+	 * Stat[0]	mot de status général
+	 * Stat[1]	fin de buffer OUT pF
+	 * Stat[2]	fin de buffer OUT pf
+	 * Stat[3]	fin de buffer IN pF
+	 * Stat[4]	fin de buffer IN pf
+	 * Stat[5]	underrun poid fort
+	 * Stat[6]	underrun poid faible
+	 * Stat[7]	overrun poid fort
+	 * Stat[8]	overrun poid faible
+	 * */
+
+	u64 orun_mask;
+	u64 urun_mask;
+#if 0
+	int has_underrun   = (irqsrc & MASK_SYS_STATUS_URUN) ? 1 : 0;
+	int has_overrun    = (irqsrc & MASK_SYS_STATUS_ORUN) ? 1 : 0;
+#endif
+	int eb_pending_out = (irqsrc & MASK_SYS_STATUS_EOBO) ? 1 : 0;
+	int eb_pending_in  = (irqsrc & MASK_SYS_STATUS_EOBI) ? 1 : 0;
+
+	*r_freq_changed = (irqsrc & MASK_SYS_STATUS_FREQ) ? 1 : 0;
+
+	err = lx_dsp_read_async_events(chip, stat);
+	if (err < 0)
+		return err;
+
+	if (eb_pending_in) {
+		*r_notified_in_pipe_mask = ((u64)stat[3] << 32)
+			+ stat[4];
+		snd_printdd(LXP "interrupt: EOBI pending %llx\n",
+			    *r_notified_in_pipe_mask);
+	}
+	if (eb_pending_out) {
+		*r_notified_out_pipe_mask = ((u64)stat[1] << 32)
+			+ stat[2];
+		snd_printdd(LXP "interrupt: EOBO pending %llx\n",
+			    *r_notified_out_pipe_mask);
+	}
+
+	orun_mask = ((u64)stat[7] << 32) + stat[8];
+	urun_mask = ((u64)stat[5] << 32) + stat[6];
+
+	/* todo: handle xrun notification */
+
+	return err;
+}
+
+static int lx_interrupt_request_new_buffer(struct lx6464es *chip,
+					   struct lx_stream *lx_stream)
+{
+	struct snd_pcm_substream *substream = lx_stream->stream;
+	int is_capture = lx_stream->is_capture;
+	int err;
+	unsigned long flags;
+
+	const u32 channels = substream->runtime->channels;
+	const u32 bytes_per_frame = channels * 3;
+	const u32 period_size = substream->runtime->period_size;
+	const u32 period_bytes = period_size * bytes_per_frame;
+	const u32 pos = lx_stream->frame_pos;
+	const u32 next_pos = ((pos+1) == substream->runtime->periods) ?
+		0 : pos + 1;
+
+	dma_addr_t buf = substream->dma_buffer.addr + pos * period_bytes;
+	u32 buf_hi = 0;
+	u32 buf_lo = 0;
+	u32 buffer_index = 0;
+
+	u32 needed, freed;
+	u32 size_array[MAX_STREAM_BUFFER];
+
+	snd_printdd("->lx_interrupt_request_new_buffer\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array);
+	snd_printdd(LXP "interrupt: needed %d, freed %d\n", needed, freed);
+
+	unpack_pointer(buf, &buf_lo, &buf_hi);
+	err = lx_buffer_give(chip, 0, is_capture, period_bytes, buf_lo, buf_hi,
+			     &buffer_index);
+	snd_printdd(LXP "interrupt: gave buffer index %x on %p (%d bytes)\n",
+		    buffer_index, (void *)buf, period_bytes);
+
+	lx_stream->frame_pos = next_pos;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return err;
+}
+
+void lx_tasklet_playback(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	struct lx_stream *lx_stream = &chip->playback_stream;
+	int err;
+
+	snd_printdd("->lx_tasklet_playback\n");
+
+	err = lx_interrupt_request_new_buffer(chip, lx_stream);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP
+			   "cannot request new buffer for playback\n");
+
+	snd_pcm_period_elapsed(lx_stream->stream);
+}
+
+void lx_tasklet_capture(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	struct lx_stream *lx_stream = &chip->capture_stream;
+	int err;
+
+	snd_printdd("->lx_tasklet_capture\n");
+	err = lx_interrupt_request_new_buffer(chip, lx_stream);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP
+			   "cannot request new buffer for capture\n");
+
+	snd_pcm_period_elapsed(lx_stream->stream);
+}
+
+
+
+static int lx_interrupt_handle_audio_transfer(struct lx6464es *chip,
+					      u64 notified_in_pipe_mask,
+					      u64 notified_out_pipe_mask)
+{
+	int err = 0;
+
+	if (notified_in_pipe_mask) {
+		snd_printdd(LXP "requesting audio transfer for capture\n");
+		tasklet_hi_schedule(&chip->tasklet_capture);
+	}
+
+	if (notified_out_pipe_mask) {
+		snd_printdd(LXP "requesting audio transfer for playback\n");
+		tasklet_hi_schedule(&chip->tasklet_playback);
+	}
+
+	return err;
+}
+
+
+irqreturn_t lx_interrupt(int irq, void *dev_id)
+{
+	struct lx6464es *chip = dev_id;
+	int async_pending, async_escmd;
+	u32 irqsrc;
+
+	spin_lock(&chip->lock);
+
+	snd_printdd("**************************************************\n");
+
+	if (!lx_interrupt_ack(chip, &irqsrc, &async_pending, &async_escmd)) {
+		spin_unlock(&chip->lock);
+		snd_printdd("IRQ_NONE\n");
+		return IRQ_NONE; /* this device did not cause the interrupt */
+	}
+
+	if (irqsrc & MASK_SYS_STATUS_CMD_DONE)
+		goto exit;
+
+#if 0
+	if (irqsrc & MASK_SYS_STATUS_EOBI)
+		snd_printdd(LXP "interrupt: EOBI\n");
+
+	if (irqsrc & MASK_SYS_STATUS_EOBO)
+		snd_printdd(LXP "interrupt: EOBO\n");
+
+	if (irqsrc & MASK_SYS_STATUS_URUN)
+		snd_printdd(LXP "interrupt: URUN\n");
+
+	if (irqsrc & MASK_SYS_STATUS_ORUN)
+		snd_printdd(LXP "interrupt: ORUN\n");
+#endif
+
+	if (async_pending) {
+		u64 notified_in_pipe_mask = 0;
+		u64 notified_out_pipe_mask = 0;
+		int freq_changed;
+		int err;
+
+		/* handle async events */
+		err = lx_interrupt_handle_async_events(chip, irqsrc,
+						       &freq_changed,
+						       &notified_in_pipe_mask,
+						       &notified_out_pipe_mask);
+		if (err)
+			snd_printk(KERN_ERR LXP
+				   "error handling async events\n");
+
+		err = lx_interrupt_handle_audio_transfer(chip,
+							 notified_in_pipe_mask,
+							 notified_out_pipe_mask
+			);
+		if (err)
+			snd_printk(KERN_ERR LXP
+				   "error during audio transfer\n");
+	}
+
+	if (async_escmd) {
+#if 0
+		/* backdoor for ethersound commands
+		 *
+		 * for now, we do not need this
+		 *
+		 * */
+
+		snd_printdd("lx6464es: interrupt requests escmd handling\n");
+#endif
+	}
+
+exit:
+	spin_unlock(&chip->lock);
+	return IRQ_HANDLED;	/* this device caused the interrupt */
+}
+
+
+static void lx_irq_set(struct lx6464es *chip, int enable)
+{
+	u32 reg = lx_plx_reg_read(chip, ePLX_IRQCS);
+
+	/* enable/disable interrupts
+	 *
+	 * Set the Doorbell and PCI interrupt enable bits
+	 *
+	 * */
+	if (enable)
+		reg |=  (IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB);
+	else
+		reg &= ~(IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB);
+	lx_plx_reg_write(chip, ePLX_IRQCS, reg);
+}
+
+void lx_irq_enable(struct lx6464es *chip)
+{
+	snd_printdd("->lx_irq_enable\n");
+	lx_irq_set(chip, 1);
+}
+
+void lx_irq_disable(struct lx6464es *chip)
+{
+	snd_printdd("->lx_irq_disable\n");
+	lx_irq_set(chip, 0);
+}
diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h
new file mode 100644
index 00000000000..6bd9cbbbc68
--- /dev/null
+++ b/sound/pci/lx6464es/lx_core.h
@@ -0,0 +1,242 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * low-level interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX_CORE_H
+#define LX_CORE_H
+
+#include <linux/interrupt.h>
+
+#include "lx_defs.h"
+
+#define REG_CRM_NUMBER		12
+
+struct lx6464es;
+
+/* low-level register access */
+
+/* dsp register access */
+enum {
+	eReg_BASE,
+	eReg_CSM,
+	eReg_CRM1,
+	eReg_CRM2,
+	eReg_CRM3,
+	eReg_CRM4,
+	eReg_CRM5,
+	eReg_CRM6,
+	eReg_CRM7,
+	eReg_CRM8,
+	eReg_CRM9,
+	eReg_CRM10,
+	eReg_CRM11,
+	eReg_CRM12,
+
+	eReg_ICR,
+	eReg_CVR,
+	eReg_ISR,
+	eReg_RXHTXH,
+	eReg_RXMTXM,
+	eReg_RHLTXL,
+	eReg_RESETDSP,
+
+	eReg_CSUF,
+	eReg_CSES,
+	eReg_CRESMSB,
+	eReg_CRESLSB,
+	eReg_ADMACESMSB,
+	eReg_ADMACESLSB,
+	eReg_CONFES,
+
+	eMaxPortLx
+};
+
+unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port);
+void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len);
+void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data);
+void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
+			 u32 len);
+
+/* plx register access */
+enum {
+    ePLX_PCICR,
+
+    ePLX_MBOX0,
+    ePLX_MBOX1,
+    ePLX_MBOX2,
+    ePLX_MBOX3,
+    ePLX_MBOX4,
+    ePLX_MBOX5,
+    ePLX_MBOX6,
+    ePLX_MBOX7,
+
+    ePLX_L2PCIDB,
+    ePLX_IRQCS,
+    ePLX_CHIPSC,
+
+    eMaxPort
+};
+
+unsigned long lx_plx_reg_read(struct lx6464es *chip, int port);
+void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data);
+
+/* rhm */
+struct lx_rmh {
+	u16	cmd_len;	/* length of the command to send (WORDs) */
+	u16	stat_len;	/* length of the status received (WORDs) */
+	u16	dsp_stat;	/* status type, RMP_SSIZE_XXX */
+	u16	cmd_idx;	/* index of the command */
+	u32	cmd[REG_CRM_NUMBER];
+	u32	stat[REG_CRM_NUMBER];
+};
+
+
+/* low-level dsp access */
+int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version);
+int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq);
+int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran);
+int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data);
+int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address);
+
+
+/* low-level pipe handling */
+int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture,
+		     int channels);
+int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture,
+			 u64 *rsample_count);
+int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate);
+int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture);
+
+int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture);
+
+/* low-level stream handling */
+int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime,
+			 u32 pipe, int is_capture);
+int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture,
+		    int *rstate);
+int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture,
+			      u64 *r_bytepos);
+
+int lx_stream_set_state(struct lx6464es *chip, u32 pipe,
+			int is_capture, enum stream_state_t state);
+
+static inline int lx_stream_start(struct lx6464es *chip, u32 pipe,
+				  int is_capture)
+{
+	snd_printdd("->lx_stream_start\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_RUN);
+}
+
+static inline int lx_stream_pause(struct lx6464es *chip, u32 pipe,
+				  int is_capture)
+{
+	snd_printdd("->lx_stream_pause\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_PAUSE);
+}
+
+static inline int lx_stream_stop(struct lx6464es *chip, u32 pipe,
+				 int is_capture)
+{
+	snd_printdd("->lx_stream_stop\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_STOP);
+}
+
+/* low-level buffer handling */
+int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture,
+		  u32 *r_needed, u32 *r_freed, u32 *size_array);
+int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi,
+		   u32 *r_buffer_index);
+int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 *r_buffer_size);
+int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture,
+		     u32 buffer_index);
+
+/* low-level gain/peak handling */
+int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute);
+int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels,
+		   u32 *r_levels);
+
+
+/* interrupt handling */
+irqreturn_t lx_interrupt(int irq, void *dev_id);
+void lx_irq_enable(struct lx6464es *chip);
+void lx_irq_disable(struct lx6464es *chip);
+
+void lx_tasklet_capture(unsigned long data);
+void lx_tasklet_playback(unsigned long data);
+
+
+/* Stream Format Header Defines (for LIN and IEEE754) */
+#define HEADER_FMT_BASE		HEADER_FMT_BASE_LIN
+#define HEADER_FMT_BASE_LIN	0xFED00000
+#define HEADER_FMT_BASE_FLOAT	0xFAD00000
+#define HEADER_FMT_MONO		0x00000080 /* bit 23 in header_lo. WARNING: old
+					    * bit 22 is ignored in float
+					    * format */
+#define HEADER_FMT_INTEL	0x00008000
+#define HEADER_FMT_16BITS	0x00002000
+#define HEADER_FMT_24BITS	0x00004000
+#define HEADER_FMT_UPTO11	0x00000200 /* frequency is less or equ. to 11k.
+					    * */
+#define HEADER_FMT_UPTO32	0x00000100 /* frequency is over 11k and less
+					    * then 32k.*/
+
+
+#define BIT_FMP_HEADER          23
+#define BIT_FMP_SD              22
+#define BIT_FMP_MULTICHANNEL    19
+
+#define START_STATE             1
+#define PAUSE_STATE             0
+
+
+
+
+
+/* from PcxAll_e.h */
+/* Start/Pause condition for pipes (PCXStartPipe, PCXPausePipe) */
+#define START_PAUSE_IMMEDIATE           0
+#define START_PAUSE_ON_SYNCHRO          1
+#define START_PAUSE_ON_TIME_CODE        2
+
+
+/* Pipe / Stream state */
+#define START_STATE             1
+#define PAUSE_STATE             0
+
+static inline void unpack_pointer(dma_addr_t ptr, u32 *r_low, u32 *r_high)
+{
+	*r_low = (u32)(ptr & 0xffffffff);
+#if BITS_PER_LONG == 32
+	*r_high = 0;
+#else
+	*r_high = (u32)((u64)ptr>>32);
+#endif
+}
+
+#endif /* LX_CORE_H */
diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h
new file mode 100644
index 00000000000..49d36bdd512
--- /dev/null
+++ b/sound/pci/lx6464es/lx_defs.h
@@ -0,0 +1,376 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * adapted upstream headers
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX_DEFS_H
+#define LX_DEFS_H
+
+/* code adapted from ethersound.h */
+#define	XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
+#define	XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
+					    * [ 44k - ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_44_MAX	0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_48_MAX	0x00000F08 /* 25M /
+					    * [ 48k + ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+
+/* code adapted from LXES_registers.h */
+
+#define IOCR_OUTPUTS_OFFSET 0	/* (rw) offset for the number of OUTs in the
+				 * ConfES register. */
+#define IOCR_INPUTS_OFFSET  8	/* (rw) offset for the number of INs in the
+				 * ConfES register. */
+#define FREQ_RATIO_OFFSET  19	/* (rw) offset for frequency ratio in the
+				 * ConfES register. */
+#define	FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
+				     * sample rate = frequency rate. */
+
+#define CONFES_READ_PART_MASK	0x00070000
+#define CONFES_WRITE_PART_MASK	0x00F80000
+
+/* code adapted from if_drv_mb.h */
+
+#define MASK_SYS_STATUS_ERROR	(1L << 31) /* events that lead to a PCI irq if
+					    * not yet pending */
+#define MASK_SYS_STATUS_URUN	(1L << 30)
+#define MASK_SYS_STATUS_ORUN	(1L << 29)
+#define MASK_SYS_STATUS_EOBO	(1L << 28)
+#define MASK_SYS_STATUS_EOBI	(1L << 27)
+#define MASK_SYS_STATUS_FREQ	(1L << 26)
+#define MASK_SYS_STATUS_ESA	(1L << 25) /* reserved, this is set by the
+					    * XES */
+#define MASK_SYS_STATUS_TIMER	(1L << 24)
+
+#define MASK_SYS_ASYNC_EVENTS	(MASK_SYS_STATUS_ERROR |		\
+				 MASK_SYS_STATUS_URUN  |		\
+				 MASK_SYS_STATUS_ORUN  |		\
+				 MASK_SYS_STATUS_EOBO  |		\
+				 MASK_SYS_STATUS_EOBI  |		\
+				 MASK_SYS_STATUS_FREQ  |		\
+				 MASK_SYS_STATUS_ESA)
+
+#define MASK_SYS_PCI_EVENTS		(MASK_SYS_ASYNC_EVENTS |	\
+					 MASK_SYS_STATUS_TIMER)
+
+#define MASK_SYS_TIMER_COUNT	0x0000FFFF
+
+#define MASK_SYS_STATUS_EOT_PLX		(1L << 22) /* event that remains
+						    * internal: reserved fo end
+						    * of plx dma */
+#define MASK_SYS_STATUS_XES		(1L << 21) /* event that remains
+						    * internal: pending XES
+						    * IRQ */
+#define MASK_SYS_STATUS_CMD_DONE	(1L << 20) /* alternate command
+						    * management: notify driver
+						    * instead of polling */
+
+
+#define MAX_STREAM_BUFFER 5	/* max amount of stream buffers. */
+
+#define MICROBLAZE_IBL_MIN		 32
+#define MICROBLAZE_IBL_DEFAULT	        128
+#define MICROBLAZE_IBL_MAX		512
+/* #define MASK_GRANULARITY		(2*MICROBLAZE_IBL_MAX-1) */
+
+
+
+/* command opcodes, see reference for details */
+
+/*
+ the capture bit position in the object_id field in driver commands
+ depends upon the number of managed channels. For now, 64 IN + 64 OUT are
+ supported. HOwever, the communication protocol forsees 1024 channels, hence
+ bit 10 indicates a capture (input) object).
+*/
+#define ID_IS_CAPTURE (1L << 10)
+#define ID_OFFSET	13	/* object ID is at the 13th bit in the
+				 * 1st command word.*/
+#define ID_CH_MASK    0x3F
+#define OPCODE_OFFSET	24	/* offset of the command opcode in the first
+				 * command word.*/
+
+enum cmd_mb_opcodes {
+	CMD_00_INFO_DEBUG	        = 0x00,
+	CMD_01_GET_SYS_CFG		= 0x01,
+	CMD_02_SET_GRANULARITY		= 0x02,
+	CMD_03_SET_TIMER_IRQ		= 0x03,
+	CMD_04_GET_EVENT		= 0x04,
+	CMD_05_GET_PIPES		= 0x05,
+
+	CMD_06_ALLOCATE_PIPE            = 0x06,
+	CMD_07_RELEASE_PIPE		= 0x07,
+	CMD_08_ASK_BUFFERS		= 0x08,
+	CMD_09_STOP_PIPE		= 0x09,
+	CMD_0A_GET_PIPE_SPL_COUNT	= 0x0a,
+	CMD_0B_TOGGLE_PIPE_STATE	= 0x0b,
+
+	CMD_0C_DEF_STREAM		= 0x0c,
+	CMD_0D_SET_MUTE			= 0x0d,
+	CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
+	CMD_0F_UPDATE_BUFFER		= 0x0f,
+	CMD_10_GET_BUFFER		= 0x10,
+	CMD_11_CANCEL_BUFFER		= 0x11,
+	CMD_12_GET_PEAK			= 0x12,
+	CMD_13_SET_STREAM_STATE		= 0x13,
+	CMD_14_INVALID			= 0x14,
+};
+
+/* pipe states */
+enum pipe_state_t {
+	PSTATE_IDLE	= 0,	/* the pipe is not processed in the XES_IRQ
+				 * (free or stopped, or paused). */
+	PSTATE_RUN	= 1,	/* sustained play/record state. */
+	PSTATE_PURGE	= 2,	/* the ES channels are now off, render pipes do
+				 * not DMA, record pipe do a last DMA. */
+	PSTATE_ACQUIRE	= 3,	/* the ES channels are now on, render pipes do
+				 * not yet increase their sample count, record
+				 * pipes do not DMA. */
+	PSTATE_CLOSING	= 4,	/* the pipe is releasing, and may not yet
+				 * receive an "alloc" command. */
+};
+
+/* stream states */
+enum stream_state_t {
+	SSTATE_STOP	=  0x00,       /* setting to stop resets the stream spl
+					* count.*/
+	SSTATE_RUN	= (0x01 << 0), /* start DMA and spl count handling. */
+	SSTATE_PAUSE	= (0x01 << 1), /* pause DMA and spl count handling. */
+};
+
+/* buffer flags */
+enum buffer_flags {
+	BF_VALID	= 0x80,	/* set if the buffer is valid, clear if free.*/
+	BF_CURRENT	= 0x40,	/* set if this is the current buffer (there is
+				 * always a current buffer).*/
+	BF_NOTIFY_EOB	= 0x20,	/* set if this buffer must cause a PCI event
+				 * when finished.*/
+	BF_CIRCULAR	= 0x10,	/* set if buffer[1] must be copied to buffer[0]
+				 * by the end of this buffer.*/
+	BF_64BITS_ADR	= 0x08,	/* set if the hi part of the address is valid.*/
+	BF_xx		= 0x04,	/* future extension.*/
+	BF_EOB		= 0x02,	/* set if finished, but not yet free.*/
+	BF_PAUSE	= 0x01,	/* pause stream at buffer end.*/
+	BF_ZERO		= 0x00,	/* no flags (init).*/
+};
+
+/**
+*	Stream Flags definitions
+*/
+enum stream_flags {
+	SF_ZERO		= 0x00000000, /* no flags (stream invalid). */
+	SF_VALID	= 0x10000000, /* the stream has a valid DMA_conf
+				       * info (setstreamformat). */
+	SF_XRUN		= 0x20000000, /* the stream is un x-run state. */
+	SF_START	= 0x40000000, /* the DMA is running.*/
+	SF_ASIO		= 0x80000000, /* ASIO.*/
+};
+
+
+#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
+#define PSTATE_OFFSET             28 /* 4 MSBits are status bits */
+
+
+#define MASK_STREAM_HAS_MAPPING	(1L << 12)
+#define MASK_STREAM_IS_ASIO	(1L <<  9)
+#define STREAM_FMT_OFFSET	10   /* the stream fmt bits start at the 10th
+				      * bit in the command word. */
+
+#define STREAM_FMT_16b          0x02
+#define STREAM_FMT_intel        0x01
+
+#define FREQ_FIELD_OFFSET	15  /* offset of the freq field in the response
+				     * word */
+
+#define BUFF_FLAGS_OFFSET	  24 /*  offset of the buffer flags in the
+				      *  response word. */
+#define MASK_DATA_SIZE	  0x00FFFFFF /* this must match the field size of
+				      * datasize in the buffer_t structure. */
+
+#define MASK_BUFFER_ID	        0xFF /* the cancel command awaits a buffer ID,
+				      * may be 0xFF for "current". */
+
+
+/* code adapted from PcxErr_e.h */
+
+/* Bits masks */
+
+#define ERROR_MASK              0x8000
+
+#define SOURCE_MASK             0x7800
+
+#define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
+#define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
+#define E_SOURCE_API            0x1000 /* 2 >> 1 */
+/* Error tools */
+#define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
+/* Error pcxaudio */
+#define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
+/* Error virtual pcx */
+#define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
+/* Error dispatcher */
+#define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
+/* Error from CobraNet firmware */
+#define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */
+
+#define E_SOURCE_USER           0x7800
+
+#define CLASS_MASK              0x0700
+
+#define CODE_MASK               0x00FF
+
+/* Bits values */
+
+/* Values for the error/warning bit */
+#define ERROR_VALUE             0x8000
+#define WARNING_VALUE           0x0000
+
+/* Class values */
+#define E_CLASS_GENERAL                  0x0000
+#define E_CLASS_INVALID_CMD              0x0100
+#define E_CLASS_INVALID_STD_OBJECT       0x0200
+#define E_CLASS_RSRC_IMPOSSIBLE          0x0300
+#define E_CLASS_WRONG_CONTEXT            0x0400
+#define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
+#define E_CLASS_REAL_TIME_ERROR          0x0600
+#define E_CLASS_DIRECTSHOW               0x0700
+#define E_CLASS_FREE                     0x0700
+
+
+/* Complete DRV error code for the general class */
+#define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
+#define ED_CONCURRENCY                  (ED_GN | 0x01)
+#define ED_DSP_CRASHED                  (ED_GN | 0x02)
+#define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
+#define ED_NOT_INSTALLED                (ED_GN | 0x04)
+#define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
+#define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
+#define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
+#define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
+#define ED_CANCELLED                    (ED_GN | 0x09)
+#define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
+#define ED_INVALID_ADDRESS              (ED_GN | 0x11)
+#define ED_DSP_CORRUPTED                (ED_GN | 0x12)
+#define ED_PENDING_OPERATION            (ED_GN | 0x13)
+#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
+#define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
+#define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
+#define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
+#define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
+#define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
+#define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
+#define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
+#define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
+#define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
+#define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
+#define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
+#define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
+#define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
+#define ED_FILE_ERROR                       (ED_GN | 0x22)
+#define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
+#define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
+#define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
+#define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
+#define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
+#define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
+#define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */
+
+#define ED_READ_FILE_ALREADY_OPENED	    (ED_GN | 0x2a) /* <- Decalage
+							    * pour RCX
+							    * (old 0x28)
+							    * */
+#define ED_READ_FILE_INVALID_COMMAND	    (ED_GN | 0x2b) /* ~ */
+#define ED_READ_FILE_INVALID_PARAMETER	    (ED_GN | 0x2c) /* ~ */
+#define ED_READ_FILE_ALREADY_CLOSED	    (ED_GN | 0x2d) /* ~ */
+#define ED_READ_FILE_NO_INFORMATION	    (ED_GN | 0x2e) /* ~ */
+#define ED_READ_FILE_INVALID_HANDLE	    (ED_GN | 0x2f) /* ~ */
+#define ED_READ_FILE_END_OF_FILE	    (ED_GN | 0x30) /* ~ */
+#define ED_READ_FILE_ERROR	            (ED_GN | 0x31) /* ~ */
+
+#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
+							     * PCX (old 0x14) */
+#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
+#define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
+#define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
+#define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */
+
+#define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)
+
+#define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)
+
+/* Complete DRV error code for real time class */
+#define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
+#define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
+#define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
+#define ED_STREAM_OVERRUN               (ED_RT | 0x03)
+#define ED_DSP_BUSY                     (ED_RT | 0x04)
+#define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
+#define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
+#define ED_XILINX_ERROR                 (ED_RT | 0x07)
+#define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)
+
+/* Complete BOARD error code for the invaid standard object class */
+#define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
+			 E_CLASS_INVALID_STD_OBJECT)
+#define EB_INVALID_EFFECT               (EB_ISO | 0x00)
+#define EB_INVALID_PIPE                 (EB_ISO | 0x40)
+#define EB_INVALID_STREAM               (EB_ISO | 0x80)
+#define EB_INVALID_AUDIO                (EB_ISO | 0xC0)
+
+/* Complete BOARD error code for impossible resource allocation class */
+#define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
+#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
+#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)
+
+#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE		\
+	EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
+#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE			\
+	EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE
+
+#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
+#define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
+#define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
+#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
+#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
+#define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
+#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
+#define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
+#define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
+#define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
+#define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
+#define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
+#define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)
+
+/* Complete BOARD error code for wrong call context class */
+#define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
+#define EB_CMD_REFUSED                  (EB_WCC | 0x00)
+#define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
+#define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
+#define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
+#define EB_CSE_REFUSED                  (EB_WCC | 0xFF)
+
+
+
+
+#endif /* LX_DEFS_H */
diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c
index c262049961e..3b5ca70c9d4 100644
--- a/sound/pci/oxygen/oxygen_pcm.c
+++ b/sound/pci/oxygen/oxygen_pcm.c
@@ -487,10 +487,14 @@ static int oxygen_hw_free(struct snd_pcm_substream *substream)
 {
 	struct oxygen *chip = snd_pcm_substream_chip(substream);
 	unsigned int channel = oxygen_substream_channel(substream);
+	unsigned int channel_mask = 1 << channel;
 
 	spin_lock_irq(&chip->reg_lock);
-	chip->interrupt_mask &= ~(1 << channel);
+	chip->interrupt_mask &= ~channel_mask;
 	oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask);
+
+	oxygen_set_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask);
+	oxygen_clear_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask);
 	spin_unlock_irq(&chip->reg_lock);
 
 	return snd_pcm_lib_free_pages(substream);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bc5ce11c8b1..bf971f7cfdc 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -113,8 +113,8 @@
  */
 
 /*
- * Xonar Essence STX
- * -----------------
+ * Xonar Essence ST (Deluxe)/STX
+ * -----------------------------
  *
  * CMI8788:
  *
@@ -180,6 +180,8 @@ enum {
 	MODEL_DX,
 	MODEL_HDAV,	/* without daughterboard */
 	MODEL_HDAV_H6,	/* with H6 daughterboard */
+	MODEL_ST,
+	MODEL_ST_H6,
 	MODEL_STX,
 };
 
@@ -188,8 +190,10 @@ static struct pci_device_id xonar_ids[] __devinitdata = {
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8327), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x835c), .driver_data = MODEL_STX },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x835d), .driver_data = MODEL_ST },
 	{ OXYGEN_PCI_SUBID_BROKEN_EEPROM },
 	{ }
 };
@@ -210,9 +214,9 @@ MODULE_DEVICE_TABLE(pci, xonar_ids);
 #define GPIO_DX_FRONT_PANEL	0x0002
 #define GPIO_DX_INPUT_ROUTE	0x0100
 
-#define GPIO_HDAV_DB_MASK	0x0030
-#define GPIO_HDAV_DB_H6		0x0000
-#define GPIO_HDAV_DB_XX		0x0020
+#define GPIO_DB_MASK		0x0030
+#define GPIO_DB_H6		0x0000
+#define GPIO_DB_XX		0x0020
 
 #define GPIO_ST_HP_REAR		0x0002
 #define GPIO_ST_HP		0x0080
@@ -530,7 +534,7 @@ static void xonar_hdav_init(struct oxygen *chip)
 	snd_component_add(chip->card, "CS5381");
 }
 
-static void xonar_stx_init(struct oxygen *chip)
+static void xonar_st_init(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
 
@@ -539,12 +543,11 @@ static void xonar_stx_init(struct oxygen *chip)
 		       OXYGEN_2WIRE_INTERRUPT_MASK |
 		       OXYGEN_2WIRE_SPEED_FAST);
 
+	if (chip->model.private_data == MODEL_ST_H6)
+		chip->model.dac_channels = 8;
 	data->anti_pop_delay = 100;
-	data->dacs = 1;
+	data->dacs = chip->model.private_data == MODEL_ST_H6 ? 4 : 1;
 	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
 	data->pcm1796_oversampling = PCM1796_OS_64;
 
 	pcm1796_init(chip);
@@ -560,6 +563,17 @@ static void xonar_stx_init(struct oxygen *chip)
 	snd_component_add(chip->card, "CS5381");
 }
 
+static void xonar_stx_init(struct oxygen *chip)
+{
+	struct xonar_data *data = chip->model_data;
+
+	data->ext_power_reg = OXYGEN_GPI_DATA;
+	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->ext_power_bit = GPI_DX_EXT_POWER;
+
+	xonar_st_init(chip);
+}
+
 static void xonar_disable_output(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
@@ -1021,7 +1035,8 @@ static const struct oxygen_model model_xonar_hdav = {
 	.model_data_size = sizeof(struct xonar_data),
 	.device_config = PLAYBACK_0_TO_I2S |
 			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2,
+			 CAPTURE_0_FROM_I2S_2 |
+			 CAPTURE_1_FROM_SPDIF,
 	.dac_channels = 8,
 	.dac_volume_min = 255 - 2*60,
 	.dac_volume_max = 255,
@@ -1034,7 +1049,7 @@ static const struct oxygen_model model_xonar_hdav = {
 static const struct oxygen_model model_xonar_st = {
 	.longname = "Asus Virtuoso 100",
 	.chip = "AV200",
-	.init = xonar_stx_init,
+	.init = xonar_st_init,
 	.control_filter = xonar_st_control_filter,
 	.mixer_init = xonar_st_mixer_init,
 	.cleanup = xonar_st_cleanup,
@@ -1067,6 +1082,7 @@ static int __devinit get_xonar_model(struct oxygen *chip,
 		[MODEL_D2]	= &model_xonar_d2,
 		[MODEL_D2X]	= &model_xonar_d2,
 		[MODEL_HDAV]	= &model_xonar_hdav,
+		[MODEL_ST]	= &model_xonar_st,
 		[MODEL_STX]	= &model_xonar_st,
 	};
 	static const char *const names[] = {
@@ -1076,6 +1092,8 @@ static int __devinit get_xonar_model(struct oxygen *chip,
 		[MODEL_D2X]	= "Xonar D2X",
 		[MODEL_HDAV]	= "Xonar HDAV1.3",
 		[MODEL_HDAV_H6]	= "Xonar HDAV1.3+H6",
+		[MODEL_ST]	= "Xonar Essence ST",
+		[MODEL_ST_H6]	= "Xonar Essence ST+H6",
 		[MODEL_STX]	= "Xonar Essence STX",
 	};
 	unsigned int model = id->driver_data;
@@ -1092,21 +1110,27 @@ static int __devinit get_xonar_model(struct oxygen *chip,
 		chip->model.init = xonar_dx_init;
 		break;
 	case MODEL_HDAV:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL,
-				    GPIO_HDAV_DB_MASK);
-		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) &
-			GPIO_HDAV_DB_MASK) {
-		case GPIO_HDAV_DB_H6:
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		case GPIO_DB_H6:
 			model = MODEL_HDAV_H6;
 			break;
-		case GPIO_HDAV_DB_XX:
+		case GPIO_DB_XX:
 			snd_printk(KERN_ERR "unknown daughterboard\n");
 			return -ENODEV;
 		}
 		break;
+	case MODEL_ST:
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		case GPIO_DB_H6:
+			model = MODEL_ST_H6;
+			break;
+		}
+		break;
 	case MODEL_STX:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL,
-				    GPIO_HDAV_DB_MASK);
+		chip->model.init = xonar_stx_init;
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
 		break;
 	}
 
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index e51a5ef1954..235a71e5ac8 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -507,41 +507,19 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip);
  */
 
 static struct pci_device_id snd_riptide_ids[] = {
-	{
-	 .vendor = 0x127a,.device = 0x4310,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4320,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4330,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4340,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
+	{ PCI_DEVICE(0x127a, 0x4310) },
+	{ PCI_DEVICE(0x127a, 0x4320) },
+	{ PCI_DEVICE(0x127a, 0x4330) },
+	{ PCI_DEVICE(0x127a, 0x4340) },
 	{0,},
 };
 
 #ifdef SUPPORT_JOYSTICK
 static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = {
-	{
-	 .vendor = 0x127a,.device = 0x4312,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4322,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{.vendor = 0x127a,.device = 0x4332,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{.vendor = 0x127a,.device = 0x4342,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
+	{ PCI_DEVICE(0x127a, 0x4312) },
+	{ PCI_DEVICE(0x127a, 0x4322) },
+	{ PCI_DEVICE(0x127a, 0x4332) },
+	{ PCI_DEVICE(0x127a, 0x4342) },
 	{0,},
 };
 #endif
@@ -1209,12 +1187,79 @@ static int riptide_resume(struct pci_dev *pci)
 }
 #endif
 
+static int try_to_load_firmware(struct cmdif *cif, struct snd_riptide *chip)
+{
+	union firmware_version firmware = { .ret = CMDRET_ZERO };
+	int i, timeout, err;
+
+	for (i = 0; i < 2; i++) {
+		WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0);
+		WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0);
+	}
+	SET_GRESET(cif->hwport);
+	udelay(100);
+	UNSET_GRESET(cif->hwport);
+	udelay(100);
+
+	for (timeout = 100000; --timeout; udelay(10)) {
+		if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport))
+			break;
+	}
+	if (!timeout) {
+		snd_printk(KERN_ERR
+			   "Riptide: device not ready, audio status: 0x%x "
+			   "ready: %d gerr: %d\n",
+			   READ_AUDIO_STATUS(cif->hwport),
+			   IS_READY(cif->hwport), IS_GERR(cif->hwport));
+		return -EIO;
+	} else {
+		snd_printdd
+			("Riptide: audio status: 0x%x ready: %d gerr: %d\n",
+			 READ_AUDIO_STATUS(cif->hwport),
+			 IS_READY(cif->hwport), IS_GERR(cif->hwport));
+	}
+
+	SEND_GETV(cif, &firmware.ret);
+	snd_printdd("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n",
+		    firmware.firmware.ASIC, firmware.firmware.CODEC,
+		    firmware.firmware.AUXDSP, firmware.firmware.PROG);
+
+	for (i = 0; i < FIRMWARE_VERSIONS; i++) {
+		if (!memcmp(&firmware_versions[i], &firmware, sizeof(firmware)))
+			break;
+	}
+	if (i >= FIRMWARE_VERSIONS)
+		return 0; /* no match */
+
+	if (!chip)
+		return 1; /* OK */
+
+	snd_printdd("Writing Firmware\n");
+	if (!chip->fw_entry) {
+		err = request_firmware(&chip->fw_entry, "riptide.hex",
+				       &chip->pci->dev);
+		if (err) {
+			snd_printk(KERN_ERR
+				   "Riptide: Firmware not available %d\n", err);
+			return -EIO;
+		}
+	}
+	err = loadfirmware(cif, chip->fw_entry->data, chip->fw_entry->size);
+	if (err) {
+		snd_printk(KERN_ERR
+			   "Riptide: Could not load firmware %d\n", err);
+		return err;
+	}
+
+	chip->firmware = firmware;
+
+	return 1; /* OK */
+}
+
 static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 {
-	int timeout, tries;
 	union cmdret rptr = CMDRET_ZERO;
-	union firmware_version firmware;
-	int i, j, err, has_firmware;
+	int err, tries;
 
 	if (!cif)
 		return -EINVAL;
@@ -1227,75 +1272,11 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 	cif->is_reset = 0;
 
 	tries = RESET_TRIES;
-	has_firmware = 0;
-	while (has_firmware == 0 && tries-- > 0) {
-		for (i = 0; i < 2; i++) {
-			WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0);
-			WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0);
-		}
-		SET_GRESET(cif->hwport);
-		udelay(100);
-		UNSET_GRESET(cif->hwport);
-		udelay(100);
-
-		for (timeout = 100000; --timeout; udelay(10)) {
-			if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport))
-				break;
-		}
-		if (timeout == 0) {
-			snd_printk(KERN_ERR
-				   "Riptide: device not ready, audio status: 0x%x ready: %d gerr: %d\n",
-				   READ_AUDIO_STATUS(cif->hwport),
-				   IS_READY(cif->hwport), IS_GERR(cif->hwport));
-			return -EIO;
-		} else {
-			snd_printdd
-			    ("Riptide: audio status: 0x%x ready: %d gerr: %d\n",
-			     READ_AUDIO_STATUS(cif->hwport),
-			     IS_READY(cif->hwport), IS_GERR(cif->hwport));
-		}
-
-		SEND_GETV(cif, &rptr);
-		for (i = 0; i < 4; i++)
-			firmware.ret.retwords[i] = rptr.retwords[i];
-
-		snd_printdd
-		    ("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n",
-		     firmware.firmware.ASIC, firmware.firmware.CODEC,
-		     firmware.firmware.AUXDSP, firmware.firmware.PROG);
-
-		for (j = 0; j < FIRMWARE_VERSIONS; j++) {
-			has_firmware = 1;
-			for (i = 0; i < 4; i++) {
-				if (firmware_versions[j].ret.retwords[i] !=
-				    firmware.ret.retwords[i])
-					has_firmware = 0;
-			}
-			if (has_firmware)
-				break;
-		}
-
-		if (chip != NULL && has_firmware == 0) {
-			snd_printdd("Writing Firmware\n");
-			if (!chip->fw_entry) {
-				if ((err =
-				     request_firmware(&chip->fw_entry,
-						      "riptide.hex",
-						      &chip->pci->dev)) != 0) {
-					snd_printk(KERN_ERR
-						   "Riptide: Firmware not available %d\n",
-						   err);
-					return -EIO;
-				}
-			}
-			err = loadfirmware(cif, chip->fw_entry->data,
-					   chip->fw_entry->size);
-			if (err)
-				snd_printk(KERN_ERR
-					   "Riptide: Could not load firmware %d\n",
-					   err);
-		}
-	}
+	do {
+		err = try_to_load_firmware(cif, chip);
+		if (err < 0)
+			return err;
+	} while (!err && --tries);
 
 	SEND_SACR(cif, 0, AC97_RESET);
 	SEND_RACR(cif, AC97_RESET, &rptr);
@@ -1337,11 +1318,6 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 	SET_AIE(cif->hwport);
 	SET_AIACK(cif->hwport);
 	cif->is_reset = 1;
-	if (chip) {
-		for (i = 0; i < 4; i++)
-			chip->firmware.ret.retwords[i] =
-			    firmware.ret.retwords[i];
-	}
 
 	return 0;
 }
@@ -2038,14 +2014,12 @@ static int __devinit snd_riptide_mixer(struct snd_riptide *chip)
 }
 
 #ifdef SUPPORT_JOYSTICK
-static int have_joystick;
-static struct pci_dev *riptide_gameport_pci;
-static struct gameport *riptide_gameport;
 
 static int __devinit
 snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {
 	static int dev;
+	struct gameport *gameport;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
@@ -2054,36 +2028,33 @@ snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 		return -ENOENT;
 	}
 
-	if (joystick_port[dev]) {
-		riptide_gameport = gameport_allocate_port();
-		if (riptide_gameport) {
-			if (!request_region
-			    (joystick_port[dev], 8, "Riptide gameport")) {
-				snd_printk(KERN_WARNING
-					   "Riptide: cannot grab gameport 0x%x\n",
-					   joystick_port[dev]);
-				gameport_free_port(riptide_gameport);
-				riptide_gameport = NULL;
-			} else {
-				riptide_gameport_pci = pci;
-				riptide_gameport->io = joystick_port[dev];
-				gameport_register_port(riptide_gameport);
-			}
-		}
+	if (!joystick_port[dev++])
+		return 0;
+
+	gameport = gameport_allocate_port();
+	if (!gameport)
+		return -ENOMEM;
+	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {
+		snd_printk(KERN_WARNING
+			   "Riptide: cannot grab gameport 0x%x\n",
+			   joystick_port[dev]);
+		gameport_free_port(gameport);
+		return -EBUSY;
 	}
-	dev++;
+
+	gameport->io = joystick_port[dev];
+	gameport_register_port(gameport);
+	pci_set_drvdata(pci, gameport);
 	return 0;
 }
 
 static void __devexit snd_riptide_joystick_remove(struct pci_dev *pci)
 {
-	if (riptide_gameport) {
-		if (riptide_gameport_pci == pci) {
-			release_region(riptide_gameport->io, 8);
-			riptide_gameport_pci = NULL;
-			gameport_unregister_port(riptide_gameport);
-			riptide_gameport = NULL;
-		}
+	struct gameport *gameport = pci_get_drvdata(pci);
+	if (gameport) {
+		release_region(gameport->io, 8);
+		gameport_unregister_port(gameport);
+		pci_set_drvdata(pci, NULL);
 	}
 }
 #endif
@@ -2094,8 +2065,8 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 	static int dev;
 	struct snd_card *card;
 	struct snd_riptide *chip;
-	unsigned short addr;
-	int err = 0;
+	unsigned short val;
+	int err;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
@@ -2107,60 +2078,63 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 	if (err < 0)
 		return err;
-	if ((err = snd_riptide_create(card, pci, &chip)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_riptide_create(card, pci, &chip);
+	if (err < 0)
+		goto error;
 	card->private_data = chip;
-	if ((err = snd_riptide_pcm(chip, 0, NULL)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	if ((err = snd_riptide_mixer(chip)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, LEGACY_ENABLE_ALL
-			      | (opl3_port[dev] ? LEGACY_ENABLE_FM : 0)
+	err = snd_riptide_pcm(chip, 0, NULL);
+	if (err < 0)
+		goto error;
+	err = snd_riptide_mixer(chip);
+	if (err < 0)
+		goto error;
+
+	val = LEGACY_ENABLE_ALL;
+	if (opl3_port[dev])
+		val |= LEGACY_ENABLE_FM;
 #ifdef SUPPORT_JOYSTICK
-			      | (joystick_port[dev] ? LEGACY_ENABLE_GAMEPORT :
-				 0)
+	if (joystick_port[dev])
+		val |= LEGACY_ENABLE_GAMEPORT;
 #endif
-			      | (mpu_port[dev]
-				 ? (LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU) :
-				 0)
-			      | ((chip->irq << 4) & 0xF0));
-	if ((addr = mpu_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, addr);
-		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
-					       addr, 0, chip->irq, 0,
-					       &chip->rmidi)) < 0)
+	if (mpu_port[dev])
+		val |= LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU;
+	val |= (chip->irq << 4) & 0xf0;
+	pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, val);
+	if (mpu_port[dev]) {
+		val = mpu_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
+		err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
+					  val, 0, chip->irq, 0,
+					  &chip->rmidi);
+		if (err < 0)
 			snd_printk(KERN_WARNING
 				   "Riptide: Can't Allocate MPU at 0x%x\n",
-				   addr);
+				   val);
 		else
-			chip->mpuaddr = addr;
+			chip->mpuaddr = val;
 	}
-	if ((addr = opl3_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_FM_Base, addr);
-		if ((err = snd_opl3_create(card, addr, addr + 2,
-					   OPL3_HW_RIPTIDE, 0,
-					   &chip->opl3)) < 0)
+	if (opl3_port[dev]) {
+		val = opl3_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_FM_Base, val);
+		err = snd_opl3_create(card, val, val + 2,
+				      OPL3_HW_RIPTIDE, 0, &chip->opl3);
+		if (err < 0)
 			snd_printk(KERN_WARNING
 				   "Riptide: Can't Allocate OPL3 at 0x%x\n",
-				   addr);
+				   val);
 		else {
-			chip->opladdr = addr;
-			if ((err =
-			     snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL)) < 0)
+			chip->opladdr = val;
+			err = snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL);
+			if (err < 0)
 				snd_printk(KERN_WARNING
 					   "Riptide: Can't Allocate OPL3-HWDEP\n");
 		}
 	}
 #ifdef SUPPORT_JOYSTICK
-	if ((addr = joystick_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_Game_Base, addr);
-		chip->gameaddr = addr;
+	if (joystick_port[dev]) {
+		val = joystick_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_Game_Base, val);
+		chip->gameaddr = val;
 	}
 #endif
 
@@ -2178,13 +2152,16 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 		 chip->opladdr);
 #endif
 	snd_riptide_proc_init(chip);
-	if ((err = snd_card_register(card)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
 	pci_set_drvdata(pci, card);
 	dev++;
 	return 0;
+
+ error:
+	snd_card_free(card);
+	return err;
 }
 
 static void __devexit snd_card_riptide_remove(struct pci_dev *pci)
@@ -2216,14 +2193,11 @@ static struct pci_driver joystick_driver = {
 static int __init alsa_card_riptide_init(void)
 {
 	int err;
-	if ((err = pci_register_driver(&driver)) < 0)
+	err = pci_register_driver(&driver);
+	if (err < 0)
 		return err;
 #if defined(SUPPORT_JOYSTICK)
-	if (pci_register_driver(&joystick_driver) < 0) {
-		have_joystick = 0;
-		snd_printk(KERN_INFO "no joystick found\n");
-	} else
-		have_joystick = 1;
+	pci_register_driver(&joystick_driver);
 #endif
 	return 0;
 }
@@ -2232,8 +2206,7 @@ static void __exit alsa_card_riptide_exit(void)
 {
 	pci_unregister_driver(&driver);
 #if defined(SUPPORT_JOYSTICK)
-	if (have_joystick)
-		pci_unregister_driver(&joystick_driver);
+	pci_unregister_driver(&joystick_driver);
 #endif
 }
 
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 314e73531bd..3da5c029f93 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/firmware.h>
 #include <linux/moduleparam.h>
+#include <linux/math64.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
@@ -402,9 +403,9 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin");
 #define HDSP_DMA_AREA_BYTES ((HDSP_MAX_CHANNELS+1) * HDSP_CHANNEL_BUFFER_BYTES)
 #define HDSP_DMA_AREA_KILOBYTES (HDSP_DMA_AREA_BYTES/1024)
 
-/* use hotplug firmeare loader? */
+/* use hotplug firmware loader? */
 #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
-#if !defined(HDSP_USE_HWDEP_LOADER) && !defined(CONFIG_SND_HDSP)
+#if !defined(HDSP_USE_HWDEP_LOADER)
 #define HDSP_FW_LOADER
 #endif
 #endif
@@ -1047,7 +1048,6 @@ static int hdsp_set_interrupt_interval(struct hdsp *s, unsigned int frames)
 static void hdsp_set_dds_value(struct hdsp *hdsp, int rate)
 {
 	u64 n;
-	u32 r;
 
 	if (rate >= 112000)
 		rate /= 4;
@@ -1055,7 +1055,7 @@ static void hdsp_set_dds_value(struct hdsp *hdsp, int rate)
 		rate /= 2;
 
 	n = DDS_NUMERATOR;
-	div64_32(&n, rate, &r);
+	n = div_u64(n, rate);
 	/* n should be less than 2^32 for being written to FREQ register */
 	snd_BUG_ON(n >> 32);
 	/* HDSP_freqReg and HDSP_resetPointer are the same, so keep the DDS
@@ -3097,7 +3097,6 @@ static int snd_hdsp_get_adat_sync_check(struct snd_kcontrol *kcontrol, struct sn
 static int hdsp_dds_offset(struct hdsp *hdsp)
 {
 	u64 n;
-	u32 r;
 	unsigned int dds_value = hdsp->dds_value;
 	int system_sample_rate = hdsp->system_sample_rate;
 
@@ -3109,7 +3108,7 @@ static int hdsp_dds_offset(struct hdsp *hdsp)
 	 * dds_value = n / rate
 	 * rate = n / dds_value
 	 */
-	div64_32(&n, dds_value, &r);
+	n = div_u64(n, dds_value);
 	if (system_sample_rate >= 112000)
 		n *= 4;
 	else if (system_sample_rate >= 56000)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index bac2dc0c5d8..0dce331a2a3 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -29,6 +29,7 @@
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/math64.h>
 #include <asm/io.h>
 
 #include <sound/core.h>
@@ -831,7 +832,6 @@ static int hdspm_set_interrupt_interval(struct hdspm * s, unsigned int frames)
 static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
 {
 	u64 n;
-	u32 r;
 	
 	if (rate >= 112000)
 		rate /= 4;
@@ -844,7 +844,7 @@ static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
         */	   
 	/* n = 104857600000000ULL; */ /*  =  2^20 * 10^8 */
 	n = 110100480000000ULL;    /* Value checked for AES32 and MADI */
-	div64_32(&n, rate, &r);
+	n = div_u64(n, rate);
 	/* n should be less than 2^32 for being written to FREQ register */
 	snd_BUG_ON(n >> 32);
 	hdspm_write(hdspm, HDSPM_freqReg, (u32)n);
diff --git a/sound/pci/sis7019.h b/sound/pci/sis7019.h
index 013b6739a74..bc8c7681940 100644
--- a/sound/pci/sis7019.h
+++ b/sound/pci/sis7019.h
@@ -203,7 +203,7 @@
 #define SIS_WEISR_B	0xac
 
 
-/* Playback DMA parameters (paramter RAM) */
+/* Playback DMA parameters (parameter RAM) */
 #define SIS_PLAY_DMA_OFFSET	0x0000
 #define SIS_PLAY_DMA_SIZE	0x10
 #define SIS_PLAY_DMA_ADDR(addr, num) \
@@ -228,7 +228,7 @@
 #define		SIS_PLAY_DMA_SSO_MASK		0xffff0000
 #define		SIS_PLAY_DMA_ESO_MASK		0x0000ffff
 
-/* Capture DMA parameters (paramter RAM) */
+/* Capture DMA parameters (parameter RAM) */
 #define SIS_CAPTURE_DMA_OFFSET	0x0800
 #define SIS_CAPTURE_DMA_SIZE	0x10
 #define SIS_CAPTURE_DMA_ADDR(addr, num) \
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index c0efe449111..6416d3f0c7b 100644
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x
 	unsigned int port;
 	const unsigned char *image;
 
-	/* XILINX reset (wait at least 1 milisecond between reset on and off). */
+	/* XILINX reset (wait at least 1 millisecond between reset on and off). */
 	vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
 	vx_inl(chip, CNTRL);
 	msleep(10);
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 80df9b1f651..2cc0eda4f20 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -477,7 +477,7 @@ static int snd_pmac_awacs_put_master_amp(struct snd_kcontrol *kcontrol,
 #define AMP_CH_SPK	0
 #define AMP_CH_HD	1
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "PC Speaker Playback Volume",
 	  .info = snd_pmac_awacs_info_volume_amp,
@@ -514,7 +514,7 @@ static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Headphone Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
@@ -523,7 +523,7 @@ static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = {
 	.private_value = AMP_CH_HD,
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "PC Speaker Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
@@ -595,46 +595,46 @@ static int snd_pmac_screamer_mic_boost_put(struct snd_kcontrol *kcontrol,
 /*
  * lists of mixer elements
  */
-static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __devinitdata = {
 	AWACS_SWITCH("Master Capture Switch", 1, SHIFT_LOOPTHRU, 0),
 	AWACS_VOLUME("Master Capture Volume", 0, 4, 0),
 /*	AWACS_SWITCH("Unknown Playback Switch", 6, SHIFT_PAROUT0, 0), */
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __devinitdata = {
 	AWACS_VOLUME("Master Playback Volume", 2, 6, 1),
 	AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_LINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __devinitdata = {
 	AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_VOLUME("Master Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __devinitdata = {
 	AWACS_VOLUME("Headphone Playback Volume", 2, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __devinitdata = {
 	AWACS_VOLUME("Master Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
@@ -642,34 +642,34 @@ static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = {
 /* FIXME: is this correct order?
  * screamer (powerbook G3 pismo) seems to have different bits...
  */
-static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __devinitdata = {
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_LINE, 0),
 	AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __devinitdata = {
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 	AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_LINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __devinitdata = {
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw __devinitdata =
 AWACS_SWITCH("Master Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __devinitdata =
 AWACS_SWITCH("Line out Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __devinitdata =
 AWACS_SWITCH("Headphone Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __devinitdata = {
 	AWACS_SWITCH("Mic Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Mic Boost Capture Volume",
 	  .info = snd_pmac_screamer_mic_boost_info,
@@ -678,34 +678,34 @@ static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __initdata =
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 	AWACS_SWITCH("CD Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __initdata =
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 	AWACS_SWITCH("Mic Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __devinitdata = {
 	AWACS_VOLUME("PC Speaker Playback Volume", 4, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
 
 
@@ -872,7 +872,7 @@ static void snd_pmac_awacs_update_automute(struct snd_pmac *chip, int do_notify)
 /*
  * initialize chip
  */
-int __init
+int __devinit
 snd_pmac_awacs_init(struct snd_pmac *chip)
 {
 	int pm7500 = IS_PM7500;
diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c
index 89f5c328acf..a9d350789f5 100644
--- a/sound/ppc/beep.c
+++ b/sound/ppc/beep.c
@@ -215,7 +215,7 @@ static struct snd_kcontrol_new snd_pmac_beep_mixer = {
 };
 
 /* Initialize beep stuff */
-int __init snd_pmac_attach_beep(struct snd_pmac *chip)
+int __devinit snd_pmac_attach_beep(struct snd_pmac *chip)
 {
 	struct pmac_beep *beep;
 	struct input_dev *input_dev;
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 45a76297c38..16ed240e423 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -46,12 +46,12 @@ snd_pmac_burgundy_extend_wait(struct snd_pmac *chip)
 	timeout = 50;
 	while (!(in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--)
 		udelay(1);
-	if (! timeout)
+	if (timeout < 0)
 		printk(KERN_DEBUG "burgundy_extend_wait: timeout #1\n");
 	timeout = 50;
 	while ((in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--)
 		udelay(1);
-	if (! timeout)
+	if (timeout < 0)
 		printk(KERN_DEBUG "burgundy_extend_wait: timeout #2\n");
 }
 
@@ -468,7 +468,7 @@ static int snd_pmac_burgundy_put_switch_b(struct snd_kcontrol *kcontrol,
 /*
  * Burgundy mixers
  */
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Master Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_MASTER_VOLUME, 8),
 	BURGUNDY_VOLUME_W("CD Capture Volume", 0,
@@ -496,7 +496,7 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = {
  */	BURGUNDY_SWITCH_B("PCM Capture Switch", 0,
 			MASK_ADDR_BURGUNDY_HOSTIFEH, 0x01, 0, 0)
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Line in Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_VOLLINE, 16),
 	BURGUNDY_VOLUME_W("Mic Capture Volume", 0,
@@ -522,7 +522,7 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = {
 	BURGUNDY_SWITCH_B("Mic Boost Capture Switch", 0,
 			MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1)
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Line in Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_VOLMIC, 16),
 	BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0,
@@ -538,33 +538,33 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = {
 /*	BURGUNDY_SWITCH_B("Line in Boost Capture Switch", 0,
  *		MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) */
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Master Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT | BURGUNDY_LINEOUT_LEFT | BURGUNDY_HP_LEFT,
 	BURGUNDY_OUTPUT_RIGHT | BURGUNDY_LINEOUT_RIGHT | BURGUNDY_HP_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("Master Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN
 	| BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN, 0, 0);
-static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Line out Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_LINEOUT_LEFT, BURGUNDY_LINEOUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("Line out Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Headphone Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_HP_LEFT, BURGUNDY_HP_RIGHT, 1);
@@ -618,7 +618,7 @@ static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_noti
 /*
  * initialize burgundy
  */
-int __init snd_pmac_burgundy_init(struct snd_pmac *chip)
+int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip)
 {
 	int imac = machine_is_compatible("iMac");
 	int i, err;
diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c
index f8d478c2da6..24200b7bdac 100644
--- a/sound/ppc/daca.c
+++ b/sound/ppc/daca.c
@@ -244,7 +244,7 @@ static void daca_cleanup(struct snd_pmac *chip)
 }
 
 /* exported */
-int __init snd_pmac_daca_init(struct snd_pmac *chip)
+int __devinit snd_pmac_daca_init(struct snd_pmac *chip)
 {
 	int i, err;
 	struct pmac_daca *mix;
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index a5afb2682e7..835fa19ed46 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -33,10 +33,6 @@
 static struct pmac_keywest *keywest_ctx;
 
 
-#ifndef i2c_device_name
-#define i2c_device_name(x)	((x)->name)
-#endif
-
 static int keywest_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -56,7 +52,7 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter)
 	if (! keywest_ctx)
 		return -EINVAL;
 
-	if (strncmp(i2c_device_name(adapter), "mac-io", 6))
+	if (strncmp(adapter->name, "mac-io", 6))
 		return 0; /* ignored */
 
 	memset(&info, 0, sizeof(struct i2c_board_info));
@@ -109,7 +105,7 @@ void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
 	}
 }
 
-int __init snd_pmac_tumbler_post_init(void)
+int __devinit snd_pmac_tumbler_post_init(void)
 {
 	int err;
 	
@@ -124,7 +120,7 @@ int __init snd_pmac_tumbler_post_init(void)
 }
 
 /* exported */
-int __init snd_pmac_keywest_init(struct pmac_keywest *i2c)
+int __devinit snd_pmac_keywest_init(struct pmac_keywest *i2c)
 {
 	int err;
 
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 9b4e9c31669..7bc492ee77e 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -702,7 +702,7 @@ static struct snd_pcm_ops snd_pmac_capture_ops = {
 	.pointer =	snd_pmac_capture_pointer,
 };
 
-int __init snd_pmac_pcm_new(struct snd_pmac *chip)
+int __devinit snd_pmac_pcm_new(struct snd_pmac *chip)
 {
 	struct snd_pcm *pcm;
 	int err;
@@ -908,7 +908,7 @@ static int snd_pmac_dev_free(struct snd_device *device)
  * check the machine support byteswap (little-endian)
  */
 
-static void __init detect_byte_swap(struct snd_pmac *chip)
+static void __devinit detect_byte_swap(struct snd_pmac *chip)
 {
 	struct device_node *mio;
 
@@ -934,7 +934,7 @@ static void __init detect_byte_swap(struct snd_pmac *chip)
 /*
  * detect a sound chip
  */
-static int __init snd_pmac_detect(struct snd_pmac *chip)
+static int __devinit snd_pmac_detect(struct snd_pmac *chip)
 {
 	struct device_node *sound;
 	struct device_node *dn;
@@ -1143,7 +1143,7 @@ static int pmac_hp_detect_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
+static struct snd_kcontrol_new auto_mute_controls[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Auto Mute Switch",
 	  .info = snd_pmac_boolean_mono_info,
@@ -1158,7 +1158,7 @@ static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
 	},
 };
 
-int __init snd_pmac_add_automute(struct snd_pmac *chip)
+int __devinit snd_pmac_add_automute(struct snd_pmac *chip)
 {
 	int err;
 	chip->auto_mute = 1;
@@ -1175,7 +1175,7 @@ int __init snd_pmac_add_automute(struct snd_pmac *chip)
 /*
  * create and detect a pmac chip record
  */
-int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
+int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 {
 	struct snd_pmac *chip;
 	struct device_node *np;
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index f361c26506a..53c81a54761 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -18,81 +18,31 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
 #include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <sound/asound.h>
+#include <sound/control.h>
 #include <sound/core.h>
 #include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/asound.h>
 #include <sound/memalloc.h>
+#include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/control.h>
-#include <linux/dmapool.h>
-#include <linux/dma-mapping.h>
-#include <asm/firmware.h>
+
 #include <asm/dma.h>
+#include <asm/firmware.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
 #include <asm/ps3av.h>
 
-#include "snd_ps3_reg.h"
 #include "snd_ps3.h"
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("PS3 sound driver");
-MODULE_AUTHOR("Sony Computer Entertainment Inc.");
-
-/* module  entries */
-static int __init snd_ps3_init(void);
-static void __exit snd_ps3_exit(void);
-
-/* ALSA snd driver ops */
-static int snd_ps3_pcm_open(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_close(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_prepare(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_trigger(struct snd_pcm_substream *substream,
-				 int cmd);
-static snd_pcm_uframes_t snd_ps3_pcm_pointer(struct snd_pcm_substream
-					     *substream);
-static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *hw_params);
-static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream);
-
-
-/* ps3_system_bus_driver entries */
-static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev);
-static int snd_ps3_driver_remove(struct ps3_system_bus_device *dev);
-
-/* address setup */
-static int snd_ps3_map_mmio(void);
-static void snd_ps3_unmap_mmio(void);
-static int snd_ps3_allocate_irq(void);
-static void snd_ps3_free_irq(void);
-static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start);
-
-/* interrupt handler */
-static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id);
-
-
-/* set sampling rate/format */
-static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream);
-/* take effect parameter change */
-static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card);
-/* initialize avsetting and take it effect */
-static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card);
-/* setup dma */
-static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
-			       enum snd_ps3_dma_filltype filltype);
-static void snd_ps3_wait_for_dma_stop(struct snd_ps3_card_info *card);
-
-static dma_addr_t v_to_bus(struct snd_ps3_card_info *, void  *vaddr, int ch);
+#include "snd_ps3_reg.h"
 
 
-module_init(snd_ps3_init);
-module_exit(snd_ps3_exit);
-
 /*
  * global
  */
@@ -165,25 +115,13 @@ static const struct snd_pcm_hardware snd_ps3_pcm_hw = {
 	.fifo_size = PS3_AUDIO_FIFO_SIZE
 };
 
-static struct snd_pcm_ops snd_ps3_pcm_spdif_ops =
-{
-	.open = snd_ps3_pcm_open,
-	.close = snd_ps3_pcm_close,
-	.prepare = snd_ps3_pcm_prepare,
-	.ioctl = snd_pcm_lib_ioctl,
-	.trigger = snd_ps3_pcm_trigger,
-	.pointer = snd_ps3_pcm_pointer,
-	.hw_params = snd_ps3_pcm_hw_params,
-	.hw_free = snd_ps3_pcm_hw_free
-};
-
 static int snd_ps3_verify_dma_stop(struct snd_ps3_card_info *card,
 				   int count, int force_stop)
 {
 	int dma_ch, done, retries, stop_forced = 0;
 	uint32_t status;
 
-	for (dma_ch = 0; dma_ch < 8; dma_ch ++) {
+	for (dma_ch = 0; dma_ch < 8; dma_ch++) {
 		retries = count;
 		do {
 			status = read_reg(PS3_AUDIO_KICK(dma_ch)) &
@@ -259,9 +197,7 @@ static void snd_ps3_kick_dma(struct snd_ps3_card_info *card)
 /*
  * convert virtual addr to ioif bus addr.
  */
-static dma_addr_t v_to_bus(struct snd_ps3_card_info *card,
-			   void * paddr,
-			   int ch)
+static dma_addr_t v_to_bus(struct snd_ps3_card_info *card, void *paddr, int ch)
 {
 	return card->dma_start_bus_addr[ch] +
 		(paddr - card->dma_start_vaddr[ch]);
@@ -321,7 +257,7 @@ static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
 	spin_lock_irqsave(&card->dma_lock, irqsave);
 	for (ch = 0; ch < 2; ch++) {
 		start_vaddr = card->dma_next_transfer_vaddr[0];
-		for (stage = 0; stage < fill_stages; stage ++) {
+		for (stage = 0; stage < fill_stages; stage++) {
 			dma_ch = stage * 2 + ch;
 			if (silent)
 				dma_addr = card->null_buffer_start_dma_addr;
@@ -372,6 +308,71 @@ static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
 }
 
 /*
+ * Interrupt handler
+ */
+static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
+{
+
+	uint32_t port_intr;
+	int underflow_occured = 0;
+	struct snd_ps3_card_info *card = dev_id;
+
+	if (!card->running) {
+		update_reg(PS3_AUDIO_AX_IS, 0);
+		update_reg(PS3_AUDIO_INTR_0, 0);
+		return IRQ_HANDLED;
+	}
+
+	port_intr = read_reg(PS3_AUDIO_AX_IS);
+	/*
+	 *serial buffer empty detected (every 4 times),
+	 *program next dma and kick it
+	 */
+	if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) {
+		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0));
+		if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
+			write_reg(PS3_AUDIO_AX_IS, port_intr);
+			underflow_occured = 1;
+		}
+		if (card->silent) {
+			/* we are still in silent time */
+			snd_ps3_program_dma(card,
+				(underflow_occured) ?
+				SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL :
+				SND_PS3_DMA_FILLTYPE_SILENT_RUNNING);
+			snd_ps3_kick_dma(card);
+			card->silent--;
+		} else {
+			snd_ps3_program_dma(card,
+				(underflow_occured) ?
+				SND_PS3_DMA_FILLTYPE_FIRSTFILL :
+				SND_PS3_DMA_FILLTYPE_RUNNING);
+			snd_ps3_kick_dma(card);
+			snd_pcm_period_elapsed(card->substream);
+		}
+	} else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
+		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0));
+		/*
+		 * serial out underflow, but buffer empty not detected.
+		 * in this case, fill fifo with 0 to recover.  After
+		 * filling dummy data, serial automatically start to
+		 * consume them and then will generate normal buffer
+		 * empty interrupts.
+		 * If both buffer underflow and buffer empty are occured,
+		 * it is better to do nomal data transfer than empty one
+		 */
+		snd_ps3_program_dma(card,
+				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+		snd_ps3_kick_dma(card);
+		snd_ps3_program_dma(card,
+				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+		snd_ps3_kick_dma(card);
+	}
+	/* clear interrupt cause */
+	return IRQ_HANDLED;
+};
+
+/*
  * audio mute on/off
  * mute_on : 0 output enabled
  *           1 mute
@@ -382,6 +383,142 @@ static int snd_ps3_mute(int mute_on)
 }
 
 /*
+ * av setting
+ * NOTE: calling this function may generate audio interrupt.
+ */
+static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card)
+{
+	int ret, retries, i;
+	pr_debug("%s: start\n", __func__);
+
+	ret = ps3av_set_audio_mode(card->avs.avs_audio_ch,
+				  card->avs.avs_audio_rate,
+				  card->avs.avs_audio_width,
+				  card->avs.avs_audio_format,
+				  card->avs.avs_audio_source);
+	/*
+	 * Reset the following unwanted settings:
+	 */
+
+	/* disable all 3wire buffers */
+	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
+			~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(1) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(2) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(3)),
+			0);
+	wmb();	/* ensure the hardware sees the change */
+	/* wait for actually stopped */
+	retries = 1000;
+	while ((read_reg(PS3_AUDIO_AO_3WMCTRL) &
+		(PS3_AUDIO_AO_3WMCTRL_ASORUN(0) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(1) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(2) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) &&
+	       --retries) {
+		udelay(1);
+	}
+
+	/* reset buffer pointer */
+	for (i = 0; i < 4; i++) {
+		update_reg(PS3_AUDIO_AO_3WCTRL(i),
+			   PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET);
+		udelay(10);
+	}
+	wmb(); /* ensure the hardware actually start resetting */
+
+	/* enable 3wire#0 buffer */
+	update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0));
+
+
+	/* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */
+	update_mask_reg(PS3_AUDIO_AO_3WCTRL(0),
+			~PS3_AUDIO_AO_3WCTRL_ASODF,
+			PS3_AUDIO_AO_3WCTRL_ASODF_LSB);
+	update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0),
+			~PS3_AUDIO_AO_SPDCTRL_SPODF,
+			PS3_AUDIO_AO_SPDCTRL_SPODF_LSB);
+	/* ensure all the setting above is written back to register */
+	wmb();
+	/* avsetting driver altered AX_IE, caller must reset it if you want */
+	pr_debug("%s: end\n", __func__);
+	return ret;
+}
+
+/*
+ *  set sampling rate according to the substream
+ */
+static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream)
+{
+	struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream);
+	struct snd_ps3_avsetting_info avs;
+	int ret;
+
+	avs = card->avs;
+
+	pr_debug("%s: called freq=%d width=%d\n", __func__,
+		 substream->runtime->rate,
+		 snd_pcm_format_width(substream->runtime->format));
+
+	pr_debug("%s: before freq=%d width=%d\n", __func__,
+		 card->avs.avs_audio_rate, card->avs.avs_audio_width);
+
+	/* sample rate */
+	switch (substream->runtime->rate) {
+	case 44100:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K;
+		break;
+	case 48000:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
+		break;
+	case 88200:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K;
+		break;
+	case 96000:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K;
+		break;
+	default:
+		pr_info("%s: invalid rate %d\n", __func__,
+			substream->runtime->rate);
+		return 1;
+	}
+
+	/* width */
+	switch (snd_pcm_format_width(substream->runtime->format)) {
+	case 16:
+		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
+		break;
+	case 24:
+		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24;
+		break;
+	default:
+		pr_info("%s: invalid width %d\n", __func__,
+			snd_pcm_format_width(substream->runtime->format));
+		return 1;
+	}
+
+	memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8);
+
+	if (memcmp(&card->avs, &avs, sizeof(avs))) {
+		pr_debug("%s: after freq=%d width=%d\n", __func__,
+			 card->avs.avs_audio_rate, card->avs.avs_audio_width);
+
+		card->avs = avs;
+		snd_ps3_change_avsetting(card);
+		ret = 0;
+	} else
+		ret = 1;
+
+	/* check CS non-audio bit and mute accordingly */
+	if (avs.avs_cs_info[0] & 0x02)
+		ps3av_audio_mute_analog(1); /* mute if non-audio */
+	else
+		ps3av_audio_mute_analog(0);
+
+	return ret;
+}
+
+/*
  * PCM operators
  */
 static int snd_ps3_pcm_open(struct snd_pcm_substream *substream)
@@ -406,6 +543,13 @@ static int snd_ps3_pcm_open(struct snd_pcm_substream *substream)
 	return 0;
 };
 
+static int snd_ps3_pcm_close(struct snd_pcm_substream *substream)
+{
+	/* mute on */
+	snd_ps3_mute(1);
+	return 0;
+};
+
 static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *hw_params)
 {
@@ -417,6 +561,13 @@ static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 };
 
+static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	int ret;
+	ret = snd_pcm_lib_free_pages(substream);
+	return ret;
+};
+
 static int snd_ps3_delay_to_bytes(struct snd_pcm_substream *substream,
 				  unsigned int delay_ms)
 {
@@ -556,202 +707,6 @@ static snd_pcm_uframes_t snd_ps3_pcm_pointer(
 	return ret;
 };
 
-static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream)
-{
-	int ret;
-	ret = snd_pcm_lib_free_pages(substream);
-	return ret;
-};
-
-static int snd_ps3_pcm_close(struct snd_pcm_substream *substream)
-{
-	/* mute on */
-	snd_ps3_mute(1);
-	return 0;
-};
-
-static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
-{
-	/*
-	 * avsetting driver seems to never change the followings
-	 * so, init them here once
-	 */
-
-	/* no dma interrupt needed */
-	write_reg(PS3_AUDIO_INTR_EN_0, 0);
-
-	/* use every 4 buffer empty interrupt */
-	update_mask_reg(PS3_AUDIO_AX_IC,
-			PS3_AUDIO_AX_IC_AASOIMD_MASK,
-			PS3_AUDIO_AX_IC_AASOIMD_EVERY4);
-
-	/* enable 3wire clocks */
-	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
-			~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED |
-			  PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED),
-			0);
-	update_reg(PS3_AUDIO_AO_3WMCTRL,
-		   PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT);
-}
-
-/*
- * av setting
- * NOTE: calling this function may generate audio interrupt.
- */
-static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card)
-{
-	int ret, retries, i;
-	pr_debug("%s: start\n", __func__);
-
-	ret = ps3av_set_audio_mode(card->avs.avs_audio_ch,
-				  card->avs.avs_audio_rate,
-				  card->avs.avs_audio_width,
-				  card->avs.avs_audio_format,
-				  card->avs.avs_audio_source);
-	/*
-	 * Reset the following unwanted settings:
-	 */
-
-	/* disable all 3wire buffers */
-	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
-			~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(1) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(2) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(3)),
-			0);
-	wmb(); 	/* ensure the hardware sees the change */
-	/* wait for actually stopped */
-	retries = 1000;
-	while ((read_reg(PS3_AUDIO_AO_3WMCTRL) &
-		(PS3_AUDIO_AO_3WMCTRL_ASORUN(0) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(1) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(2) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) &&
-	       --retries) {
-		udelay(1);
-	}
-
-	/* reset buffer pointer */
-	for (i = 0; i < 4; i++) {
-		update_reg(PS3_AUDIO_AO_3WCTRL(i),
-			   PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET);
-		udelay(10);
-	}
-	wmb(); /* ensure the hardware actually start resetting */
-
-	/* enable 3wire#0 buffer */
-	update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0));
-
-
-	/* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */
-	update_mask_reg(PS3_AUDIO_AO_3WCTRL(0),
-			~PS3_AUDIO_AO_3WCTRL_ASODF,
-			PS3_AUDIO_AO_3WCTRL_ASODF_LSB);
-	update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0),
-			~PS3_AUDIO_AO_SPDCTRL_SPODF,
-			PS3_AUDIO_AO_SPDCTRL_SPODF_LSB);
-	/* ensure all the setting above is written back to register */
-	wmb();
-	/* avsetting driver altered AX_IE, caller must reset it if you want */
-	pr_debug("%s: end\n", __func__);
-	return ret;
-}
-
-static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card)
-{
-	int ret;
-	pr_debug("%s: start\n", __func__);
-	card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2;
-	card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
-	card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
-	card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM;
-	card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL;
-	memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8);
-
-	ret = snd_ps3_change_avsetting(card);
-
-	snd_ps3_audio_fixup(card);
-
-	/* to start to generate SPDIF signal, fill data */
-	snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-	snd_ps3_kick_dma(card);
-	pr_debug("%s: end\n", __func__);
-	return ret;
-}
-
-/*
- *  set sampling rate according to the substream
- */
-static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream)
-{
-	struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream);
-	struct snd_ps3_avsetting_info avs;
-	int ret;
-
-	avs = card->avs;
-
-	pr_debug("%s: called freq=%d width=%d\n", __func__,
-		 substream->runtime->rate,
-		 snd_pcm_format_width(substream->runtime->format));
-
-	pr_debug("%s: before freq=%d width=%d\n", __func__,
-		 card->avs.avs_audio_rate, card->avs.avs_audio_width);
-
-	/* sample rate */
-	switch (substream->runtime->rate) {
-	case 44100:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K;
-		break;
-	case 48000:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
-		break;
-	case 88200:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K;
-		break;
-	case 96000:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K;
-		break;
-	default:
-		pr_info("%s: invalid rate %d\n", __func__,
-			substream->runtime->rate);
-		return 1;
-	}
-
-	/* width */
-	switch (snd_pcm_format_width(substream->runtime->format)) {
-	case 16:
-		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
-		break;
-	case 24:
-		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24;
-		break;
-	default:
-		pr_info("%s: invalid width %d\n", __func__,
-			snd_pcm_format_width(substream->runtime->format));
-		return 1;
-	}
-
-	memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8);
-
-	if (memcmp(&card->avs, &avs, sizeof(avs))) {
-		pr_debug("%s: after freq=%d width=%d\n", __func__,
-			 card->avs.avs_audio_rate, card->avs.avs_audio_width);
-
-		card->avs = avs;
-		snd_ps3_change_avsetting(card);
-		ret = 0;
-	} else
-		ret = 1;
-
-	/* check CS non-audio bit and mute accordingly */
-	if (avs.avs_cs_info[0] & 0x02)
-		ps3av_audio_mute_analog(1); /* mute if non-audio */
-	else
-		ps3av_audio_mute_analog(0);
-
-	return ret;
-}
-
 /*
  * SPDIF status bits controls
  */
@@ -798,28 +753,39 @@ static struct snd_kcontrol_new spdif_ctls[] = {
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_cmask_get,
 	},
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_pmask_get,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_default_get,
 		.put = snd_ps3_spdif_default_put,
 	},
 };
 
+static struct snd_pcm_ops snd_ps3_pcm_spdif_ops = {
+	.open = snd_ps3_pcm_open,
+	.close = snd_ps3_pcm_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_ps3_pcm_hw_params,
+	.hw_free = snd_ps3_pcm_hw_free,
+	.prepare = snd_ps3_pcm_prepare,
+	.trigger = snd_ps3_pcm_trigger,
+	.pointer = snd_ps3_pcm_pointer,
+};
+
 
-static int snd_ps3_map_mmio(void)
+static int __devinit snd_ps3_map_mmio(void)
 {
 	the_card.mapped_mmio_vaddr =
 		ioremap(the_card.ps3_dev->m_region->bus_addr,
@@ -841,7 +807,7 @@ static void snd_ps3_unmap_mmio(void)
 	the_card.mapped_mmio_vaddr = NULL;
 }
 
-static int snd_ps3_allocate_irq(void)
+static int __devinit snd_ps3_allocate_irq(void)
 {
 	int ret;
 	u64 lpar_addr, lpar_size;
@@ -899,7 +865,7 @@ static void snd_ps3_free_irq(void)
 	ps3_irq_plug_destroy(the_card.irq_no);
 }
 
-static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
+static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
 {
 	uint64_t val;
 	int ret;
@@ -915,7 +881,53 @@ static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
 			ret);
 }
 
-static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
+static void __devinit snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
+{
+	/*
+	 * avsetting driver seems to never change the followings
+	 * so, init them here once
+	 */
+
+	/* no dma interrupt needed */
+	write_reg(PS3_AUDIO_INTR_EN_0, 0);
+
+	/* use every 4 buffer empty interrupt */
+	update_mask_reg(PS3_AUDIO_AX_IC,
+			PS3_AUDIO_AX_IC_AASOIMD_MASK,
+			PS3_AUDIO_AX_IC_AASOIMD_EVERY4);
+
+	/* enable 3wire clocks */
+	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
+			~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED |
+			  PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED),
+			0);
+	update_reg(PS3_AUDIO_AO_3WMCTRL,
+		   PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT);
+}
+
+static int __devinit snd_ps3_init_avsetting(struct snd_ps3_card_info *card)
+{
+	int ret;
+	pr_debug("%s: start\n", __func__);
+	card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2;
+	card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
+	card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
+	card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM;
+	card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL;
+	memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8);
+
+	ret = snd_ps3_change_avsetting(card);
+
+	snd_ps3_audio_fixup(card);
+
+	/* to start to generate SPDIF signal, fill data */
+	snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+	snd_ps3_kick_dma(card);
+	pr_debug("%s: end\n", __func__);
+	return ret;
+}
+
+static int __devinit snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
 {
 	int i, ret;
 	u64 lpar_addr, lpar_size;
@@ -1020,11 +1032,12 @@ static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
 	 * its size should be lager than PS3_AUDIO_FIFO_STAGE_SIZE * 2
 	 * PAGE_SIZE is enogh
 	 */
-	if (!(the_card.null_buffer_start_vaddr =
-	      dma_alloc_coherent(&the_card.ps3_dev->core,
-				 PAGE_SIZE,
-				 &the_card.null_buffer_start_dma_addr,
-				 GFP_KERNEL))) {
+	the_card.null_buffer_start_vaddr =
+		dma_alloc_coherent(&the_card.ps3_dev->core,
+				   PAGE_SIZE,
+				   &the_card.null_buffer_start_dma_addr,
+				   GFP_KERNEL);
+	if (!the_card.null_buffer_start_vaddr) {
 		pr_info("%s: nullbuffer alloc failed\n", __func__);
 		goto clean_preallocate;
 	}
@@ -1115,71 +1128,6 @@ static struct ps3_system_bus_driver snd_ps3_bus_driver_info = {
 
 
 /*
- * Interrupt handler
- */
-static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
-{
-
-	uint32_t port_intr;
-	int underflow_occured = 0;
-	struct snd_ps3_card_info *card = dev_id;
-
-	if (!card->running) {
-		update_reg(PS3_AUDIO_AX_IS, 0);
-		update_reg(PS3_AUDIO_INTR_0, 0);
-		return IRQ_HANDLED;
-	}
-
-	port_intr = read_reg(PS3_AUDIO_AX_IS);
-	/*
-	 *serial buffer empty detected (every 4 times),
-	 *program next dma and kick it
-	 */
-	if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) {
-		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0));
-		if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
-			write_reg(PS3_AUDIO_AX_IS, port_intr);
-			underflow_occured = 1;
-		}
-		if (card->silent) {
-			/* we are still in silent time */
-			snd_ps3_program_dma(card,
-				(underflow_occured) ?
-				SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL :
-				SND_PS3_DMA_FILLTYPE_SILENT_RUNNING);
-			snd_ps3_kick_dma(card);
-			card->silent --;
-		} else {
-			snd_ps3_program_dma(card,
-				(underflow_occured) ?
-				SND_PS3_DMA_FILLTYPE_FIRSTFILL :
-				SND_PS3_DMA_FILLTYPE_RUNNING);
-			snd_ps3_kick_dma(card);
-			snd_pcm_period_elapsed(card->substream);
-		}
-	} else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
-		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0));
-		/*
-		 * serial out underflow, but buffer empty not detected.
-		 * in this case, fill fifo with 0 to recover.  After
-		 * filling dummy data, serial automatically start to
-		 * consume them and then will generate normal buffer
-		 * empty interrupts.
-		 * If both buffer underflow and buffer empty are occured,
-		 * it is better to do nomal data transfer than empty one
-		 */
-		snd_ps3_program_dma(card,
-				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-		snd_ps3_kick_dma(card);
-		snd_ps3_program_dma(card,
-				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-		snd_ps3_kick_dma(card);
-	}
-	/* clear interrupt cause */
-	return IRQ_HANDLED;
-};
-
-/*
  * module/subsystem initialize/terminate
  */
 static int __init snd_ps3_init(void)
@@ -1197,10 +1145,15 @@ static int __init snd_ps3_init(void)
 
 	return ret;
 }
+module_init(snd_ps3_init);
 
 static void __exit snd_ps3_exit(void)
 {
 	ps3_system_bus_driver_unregister(&snd_ps3_bus_driver_info);
 }
+module_exit(snd_ps3_exit);
 
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PS3 sound driver");
+MODULE_AUTHOR("Sony Computer Entertainment Inc.");
 MODULE_ALIAS(PS3_MODULE_ALIAS_SOUND);
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 40222fcc087..08e584d1453 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -838,7 +838,7 @@ static int snapper_put_capture_source(struct snd_kcontrol *kcontrol,
 
 /*
  */
-static struct snd_kcontrol_new tumbler_mixers[] __initdata = {
+static struct snd_kcontrol_new tumbler_mixers[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Master Playback Volume",
 	  .info = tumbler_info_master_volume,
@@ -862,7 +862,7 @@ static struct snd_kcontrol_new tumbler_mixers[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new snapper_mixers[] __initdata = {
+static struct snd_kcontrol_new snapper_mixers[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Master Playback Volume",
 	  .info = tumbler_info_master_volume,
@@ -895,7 +895,7 @@ static struct snd_kcontrol_new snapper_mixers[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new tumbler_hp_sw __initdata = {
+static struct snd_kcontrol_new tumbler_hp_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Headphone Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -903,7 +903,7 @@ static struct snd_kcontrol_new tumbler_hp_sw __initdata = {
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_HP,
 };
-static struct snd_kcontrol_new tumbler_speaker_sw __initdata = {
+static struct snd_kcontrol_new tumbler_speaker_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "PC Speaker Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -911,7 +911,7 @@ static struct snd_kcontrol_new tumbler_speaker_sw __initdata = {
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_AMP,
 };
-static struct snd_kcontrol_new tumbler_lineout_sw __initdata = {
+static struct snd_kcontrol_new tumbler_lineout_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Line Out Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -919,7 +919,7 @@ static struct snd_kcontrol_new tumbler_lineout_sw __initdata = {
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_LINE,
 };
-static struct snd_kcontrol_new tumbler_drc_sw __initdata = {
+static struct snd_kcontrol_new tumbler_drc_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "DRC Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -1269,7 +1269,7 @@ static void tumbler_resume(struct snd_pmac *chip)
 #endif
 
 /* initialize tumbler */
-static int __init tumbler_init(struct snd_pmac *chip)
+static int __devinit tumbler_init(struct snd_pmac *chip)
 {
 	int irq;
 	struct pmac_tumbler *mix = chip->mixer_data;
@@ -1339,7 +1339,7 @@ static void tumbler_cleanup(struct snd_pmac *chip)
 }
 
 /* exported */
-int __init snd_pmac_tumbler_init(struct snd_pmac *chip)
+int __devinit snd_pmac_tumbler_init(struct snd_pmac *chip)
 {
 	int i, err;
 	struct pmac_tumbler *mix;
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 3d2bb6fc6dc..d3e786a9a0a 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -32,7 +32,9 @@ source "sound/soc/fsl/Kconfig"
 source "sound/soc/omap/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/s3c24xx/Kconfig"
+source "sound/soc/s6000/Kconfig"
 source "sound/soc/sh/Kconfig"
+source "sound/soc/txx9/Kconfig"
 
 # Supported codecs
 source "sound/soc/codecs/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 0237879fd41..6f1e28de23c 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -10,4 +10,6 @@ obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)	+= omap/
 obj-$(CONFIG_SND_SOC)	+= pxa/
 obj-$(CONFIG_SND_SOC)	+= s3c24xx/
+obj-$(CONFIG_SND_SOC)	+= s6000/
 obj-$(CONFIG_SND_SOC)	+= sh/
+obj-$(CONFIG_SND_SOC)	+= txx9/
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index a608d7009db..e720d5e6f04 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -41,3 +41,11 @@ config SND_AT32_SOC_PLAYPAQ_SLAVE
           and FRAME signals on the PlayPaq.  Unless you want to play
           with the AT32 as the SSC master, you probably want to say N here,
           as this will give you better sound quality.
+
+config SND_AT91_SOC_AFEB9260
+	tristate "SoC Audio support for AFEB9260 board"
+	depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
+	select SND_ATMEL_SOC_SSC
+	select SND_SOC_TLV320AIC23
+	help
+	  Say Y here to support sound on AFEB9260 board.
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index f54a7cc68e6..e7ea56bd5f8 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -13,3 +13,4 @@ snd-soc-playpaq-objs := playpaq_wm8510.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
 obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
+obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
index 70657534e6b..9eb610c2ba9 100644
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -117,7 +117,7 @@ static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
 	 * Find actual rate, compare to requested rate
 	 */
 	actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
-	pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n",
+	pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
 		 rate, actual_rate);
 
 
diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c
new file mode 100644
index 00000000000..23349de2731
--- /dev/null
+++ b/sound/soc/atmel/snd-soc-afeb9260.c
@@ -0,0 +1,203 @@
+/*
+ * afeb9260.c  --  SoC audio for AFEB9260
+ *
+ * Copyright (C) 2009 Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <linux/gpio.h>
+
+#include "../codecs/tlv320aic23.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+#define CODEC_CLOCK 	12000000
+
+static int afeb9260_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int err;
+
+	/* Set codec DAI configuration */
+	err = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S|
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (err < 0) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return err;
+	}
+
+	/* Set cpu DAI configuration */
+	err = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (err < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return err;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	err =
+	    snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, SND_SOC_CLOCK_IN);
+
+	if (err < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return err;
+	}
+
+	return err;
+}
+
+static struct snd_soc_ops afeb9260_ops = {
+	.hw_params = afeb9260_hw_params,
+};
+
+static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LHPOUT"},
+	{"Headphone Jack", NULL, "RHPOUT"},
+
+	{"LLINEIN", NULL, "Line In"},
+	{"RLINEIN", NULL, "Line In"},
+
+	{"MICIN", NULL, "Mic Jack"},
+};
+
+static int afeb9260_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+
+	/* Add afeb9260 specific widgets */
+	snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets,
+				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
+
+	/* Set up afeb9260 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+	snd_soc_dapm_enable_pin(codec, "Line In");
+	snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link afeb9260_dai = {
+	.name = "TLV320AIC23",
+	.stream_name = "AIC23",
+	.cpu_dai = &atmel_ssc_dai[0],
+	.codec_dai = &tlv320aic23_dai,
+	.init = afeb9260_tlv320aic23_init,
+	.ops = &afeb9260_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_machine_afeb9260 = {
+	.name = "AFEB9260",
+	.platform = &atmel_soc_platform,
+	.dai_link = &afeb9260_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device afeb9260_snd_devdata = {
+	.card = &snd_soc_machine_afeb9260,
+	.codec_dev = &soc_codec_dev_tlv320aic23,
+};
+
+static struct platform_device *afeb9260_snd_device;
+
+static int __init afeb9260_soc_init(void)
+{
+	int err;
+	struct device *dev;
+	struct atmel_ssc_info *ssc_p = afeb9260_dai.cpu_dai->private_data;
+	struct ssc_device *ssc = NULL;
+
+	if (!(machine_is_afeb9260()))
+		return -ENODEV;
+
+	ssc = ssc_request(0);
+	if (IS_ERR(ssc)) {
+		printk(KERN_ERR "ASoC: Failed to request SSC 0\n");
+		err = PTR_ERR(ssc);
+		ssc = NULL;
+		goto err_ssc;
+	}
+	ssc_p->ssc = ssc;
+
+	afeb9260_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!afeb9260_snd_device) {
+		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(afeb9260_snd_device, &afeb9260_snd_devdata);
+	afeb9260_snd_devdata.dev = &afeb9260_snd_device->dev;
+	err = platform_device_add(afeb9260_snd_device);
+	if (err)
+		goto err1;
+
+	dev = &afeb9260_snd_device->dev;
+
+	return 0;
+err1:
+	platform_device_del(afeb9260_snd_device);
+	platform_device_put(afeb9260_snd_device);
+err_ssc:
+	return err;
+
+}
+
+static void __exit afeb9260_soc_exit(void)
+{
+	platform_device_unregister(afeb9260_snd_device);
+}
+
+module_init(afeb9260_soc_init);
+module_exit(afeb9260_soc_exit);
+
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_DESCRIPTION("ALSA SoC for AFEB9260");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c
index 8a935f2d176..b1ed423fabd 100644
--- a/sound/soc/blackfin/bf5xx-ac97.c
+++ b/sound/soc/blackfin/bf5xx-ac97.c
@@ -31,6 +31,15 @@
 #include "bf5xx-sport.h"
 #include "bf5xx-ac97.h"
 
+/* Anomaly notes:
+ *  05000250 -	AD1980 is running in TDM mode and RFS/TFS are generated by SPORT
+ *		contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1,
+ *		while the max AC97 data size is 13*16. The DIV is always larger
+ *		than data size. AD73311 and ad2602 are not running in TDM mode.
+ *		AD1836 and AD73322 depend on external RFS/TFS only. So, this
+ *		anomaly does not affect blackfin sound drivers.
+*/
+
 static int *cmd_count;
 static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
 
diff --git a/sound/soc/blackfin/bf5xx-sport.c b/sound/soc/blackfin/bf5xx-sport.c
index b7953c8cf83..469ce7fab20 100644
--- a/sound/soc/blackfin/bf5xx-sport.c
+++ b/sound/soc/blackfin/bf5xx-sport.c
@@ -190,7 +190,7 @@ static inline int sport_hook_rx_dummy(struct sport_device *sport)
 	desc = get_dma_next_desc_ptr(sport->dma_rx_chan);
 	/* Copy the descriptor which will be damaged to backup */
 	temp_desc = *desc;
-	desc->x_count = 0xa;
+	desc->x_count = sport->dummy_count / 2;
 	desc->y_count = 0;
 	desc->next_desc_addr = sport->dummy_rx_desc;
 	local_irq_restore(flags);
@@ -309,7 +309,7 @@ static inline int sport_hook_tx_dummy(struct sport_device *sport)
 	desc = get_dma_next_desc_ptr(sport->dma_tx_chan);
 	/* Store the descriptor which will be damaged */
 	temp_desc = *desc;
-	desc->x_count = 0xa;
+	desc->x_count = sport->dummy_count / 2;
 	desc->y_count = 0;
 	desc->next_desc_addr = sport->dummy_tx_desc;
 	local_irq_restore(flags);
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index b6c7f7a01cb..bbc97fd7664 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -18,7 +18,9 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_AK4535 if I2C
 	select SND_SOC_CS4270 if I2C
 	select SND_SOC_PCM3008
+	select SND_SOC_SPDIF
 	select SND_SOC_SSM2602 if I2C
+	select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
 	select SND_SOC_TLV320AIC23 if I2C
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
 	select SND_SOC_TLV320AIC3X if I2C
@@ -35,8 +37,12 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8900 if I2C
 	select SND_SOC_WM8903 if I2C
+	select SND_SOC_WM8940 if I2C
+	select SND_SOC_WM8960 if I2C
 	select SND_SOC_WM8971 if I2C
+	select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8990 if I2C
+	select SND_SOC_WM9081 if I2C
 	select SND_SOC_WM9705 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9712 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9713 if SND_SOC_AC97_BUS
@@ -86,9 +92,15 @@ config SND_SOC_L3
 config SND_SOC_PCM3008
        tristate
 
+config SND_SOC_SPDIF
+	tristate
+
 config SND_SOC_SSM2602
 	tristate
 
+config SND_SOC_STAC9766
+	tristate
+
 config SND_SOC_TLV320AIC23
 	tristate
 
@@ -138,12 +150,24 @@ config SND_SOC_WM8900
 config SND_SOC_WM8903
 	tristate
 
+config SND_SOC_WM8940
+        tristate
+
+config SND_SOC_WM8960
+	tristate
+
 config SND_SOC_WM8971
 	tristate
 
+config SND_SOC_WM8988
+	tristate
+
 config SND_SOC_WM8990
 	tristate
 
+config SND_SOC_WM9081
+	tristate
+
 config SND_SOC_WM9705
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f2653803ede..8b7530546f4 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -6,7 +6,9 @@ snd-soc-ak4535-objs := ak4535.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-l3-objs := l3.o
 snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-spdif-objs := spdif_transciever.o
 snd-soc-ssm2602-objs := ssm2602.o
+snd-soc-stac9766-objs := stac9766.o
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
@@ -23,8 +25,12 @@ snd-soc-wm8750-objs := wm8750.o
 snd-soc-wm8753-objs := wm8753.o
 snd-soc-wm8900-objs := wm8900.o
 snd-soc-wm8903-objs := wm8903.o
+snd-soc-wm8940-objs := wm8940.o
+snd-soc-wm8960-objs := wm8960.o
 snd-soc-wm8971-objs := wm8971.o
+snd-soc-wm8988-objs := wm8988.o
 snd-soc-wm8990-objs := wm8990.o
+snd-soc-wm9081-objs := wm9081.o
 snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
@@ -37,7 +43,9 @@ obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
+obj-$(CONFIG_SND_SOC_STAC9766)	+= snd-soc-stac9766.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
@@ -55,7 +63,11 @@ obj-$(CONFIG_SND_SOC_WM8753)	+= snd-soc-wm8753.o
 obj-$(CONFIG_SND_SOC_WM8900)	+= snd-soc-wm8900.o
 obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
 obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
+obj-$(CONFIG_SND_SOC_WM8940)	+= snd-soc-wm8940.o
+obj-$(CONFIG_SND_SOC_WM8960)	+= snd-soc-wm8960.o
+obj-$(CONFIG_SND_SOC_WM8988)	+= snd-soc-wm8988.o
 obj-$(CONFIG_SND_SOC_WM8990)	+= snd-soc-wm8990.o
+obj-$(CONFIG_SND_SOC_WM9081)	+= snd-soc-wm9081.o
 obj-$(CONFIG_SND_SOC_WM9705)	+= snd-soc-wm9705.o
 obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c
index b0d4af145b8..932299bb5d1 100644
--- a/sound/soc/codecs/ac97.c
+++ b/sound/soc/codecs/ac97.c
@@ -53,13 +53,13 @@ struct snd_soc_dai ac97_dai = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = STD_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "AC97 Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = STD_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &ac97_dai_ops,
 };
 EXPORT_SYMBOL_GPL(ac97_dai);
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index ddb3b08ac23..d7440a982d2 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -137,13 +137,13 @@ struct snd_soc_dai ad1980_dai = {
 		.channels_min = 2,
 		.channels_max = 6,
 		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+		.formats = SND_SOC_STD_AC97_FMTS, },
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+		.formats = SND_SOC_STD_AC97_FMTS, },
 };
 EXPORT_SYMBOL_GPL(ad1980_dai);
 
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 7fa09a38762..a32b8226c8a 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -18,7 +18,7 @@
  * - The machine driver's 'startup' function must call
  *   cs4270_set_dai_sysclk() with the value of MCLK.
  * - Only I2S and left-justified modes are supported
- * - Power management is not supported
+ * - Power management is supported
  */
 
 #include <linux/module.h>
@@ -27,6 +27,7 @@
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <linux/i2c.h>
+#include <linux/delay.h>
 
 #include "cs4270.h"
 
@@ -56,6 +57,7 @@
 #define CS4270_FIRSTREG	0x01
 #define CS4270_LASTREG	0x08
 #define CS4270_NUMREGS	(CS4270_LASTREG - CS4270_FIRSTREG + 1)
+#define CS4270_I2C_INCR	0x80
 
 /* Bit masks for the CS4270 registers */
 #define CS4270_CHIPID_ID	0xF0
@@ -64,6 +66,8 @@
 #define CS4270_PWRCTL_PDN_ADC	0x20
 #define CS4270_PWRCTL_PDN_DAC	0x02
 #define CS4270_PWRCTL_PDN	0x01
+#define CS4270_PWRCTL_PDN_ALL	\
+	(CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN)
 #define CS4270_MODE_SPEED_MASK	0x30
 #define CS4270_MODE_1X		0x00
 #define CS4270_MODE_2X		0x10
@@ -109,6 +113,7 @@ struct cs4270_private {
 	unsigned int mclk; /* Input frequency of the MCLK pin */
 	unsigned int mode; /* The mode (I2S or left-justified) */
 	unsigned int slave_mode;
+	unsigned int manual_mute;
 };
 
 /**
@@ -295,7 +300,7 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec)
 	s32 length;
 
 	length = i2c_smbus_read_i2c_block_data(i2c_client,
-		CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache);
+		CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache);
 
 	if (length != CS4270_NUMREGS) {
 		dev_err(codec->dev, "i2c read failure, addr=0x%x\n",
@@ -453,7 +458,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
 }
 
 /**
- * cs4270_mute - enable/disable the CS4270 external mute
+ * cs4270_dai_mute - enable/disable the CS4270 external mute
  * @dai: the SOC DAI
  * @mute: 0 = disable mute, 1 = enable mute
  *
@@ -462,21 +467,52 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
  * board does not have the MUTEA or MUTEB pins connected to such circuitry,
  * then this function will do nothing.
  */
-static int cs4270_mute(struct snd_soc_dai *dai, int mute)
+static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct snd_soc_codec *codec = dai->codec;
+	struct cs4270_private *cs4270 = codec->private_data;
 	int reg6;
 
 	reg6 = snd_soc_read(codec, CS4270_MUTE);
 
 	if (mute)
 		reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
-	else
+	else {
 		reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
+		reg6 |= cs4270->manual_mute;
+	}
 
 	return snd_soc_write(codec, CS4270_MUTE, reg6);
 }
 
+/**
+ * cs4270_soc_put_mute - put callback for the 'Master Playback switch'
+ * 			 alsa control.
+ * @kcontrol: mixer control
+ * @ucontrol: control element information
+ *
+ * This function basically passes the arguments on to the generic
+ * snd_soc_put_volsw() function and saves the mute information in
+ * our private data structure. This is because we want to prevent
+ * cs4270_dai_mute() neglecting the user's decision to manually
+ * mute the codec's output.
+ *
+ * Returns 0 for success.
+ */
+static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct cs4270_private *cs4270 = codec->private_data;
+	int left = !ucontrol->value.integer.value[0];
+	int right = !ucontrol->value.integer.value[1];
+
+	cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) |
+			      (right ? CS4270_MUTE_DAC_B : 0);
+
+	return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
 /* A list of non-DAPM controls that the CS4270 supports */
 static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 	SOC_DOUBLE_R("Master Playback Volume",
@@ -486,7 +522,9 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 	SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
 	SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
 	SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
-	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0)
+	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
+	SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1,
+		snd_soc_get_volsw, cs4270_soc_put_mute),
 };
 
 /*
@@ -506,7 +544,7 @@ static struct snd_soc_dai_ops cs4270_dai_ops = {
 	.hw_params	= cs4270_hw_params,
 	.set_sysclk	= cs4270_set_dai_sysclk,
 	.set_fmt	= cs4270_set_dai_fmt,
-	.digital_mute	= cs4270_mute,
+	.digital_mute	= cs4270_dai_mute,
 };
 
 struct snd_soc_dai cs4270_dai = {
@@ -753,6 +791,57 @@ static struct i2c_device_id cs4270_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, cs4270_id);
 
+#ifdef CONFIG_PM
+
+/* This suspend/resume implementation can handle both - a simple standby
+ * where the codec remains powered, and a full suspend, where the voltage
+ * domain the codec is connected to is teared down and/or any other hardware
+ * reset condition is asserted.
+ *
+ * The codec's own power saving features are enabled in the suspend callback,
+ * and all registers are written back to the hardware when resuming.
+ */
+
+static int cs4270_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+	struct snd_soc_codec *codec = &cs4270->codec;
+	int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+
+	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+
+static int cs4270_i2c_resume(struct i2c_client *client)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+	struct snd_soc_codec *codec = &cs4270->codec;
+	int reg;
+
+	/* In case the device was put to hard reset during sleep, we need to
+	 * wait 500ns here before any I2C communication. */
+	ndelay(500);
+
+	/* first restore the entire register cache ... */
+	for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
+		u8 val = snd_soc_read(codec, reg);
+
+		if (i2c_smbus_write_byte_data(client, reg, val)) {
+			dev_err(codec->dev, "i2c write failed\n");
+			return -EIO;
+		}
+	}
+
+	/* ... then disable the power-down bits */
+	reg = snd_soc_read(codec, CS4270_PWRCTL);
+	reg &= ~CS4270_PWRCTL_PDN_ALL;
+
+	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+#else
+#define cs4270_i2c_suspend	NULL
+#define cs4270_i2c_resume	NULL
+#endif /* CONFIG_PM */
+
 /*
  * cs4270_i2c_driver - I2C device identification
  *
@@ -767,6 +856,8 @@ static struct i2c_driver cs4270_i2c_driver = {
 	.id_table = cs4270_id,
 	.probe = cs4270_i2c_probe,
 	.remove = cs4270_i2c_remove,
+	.suspend = cs4270_i2c_suspend,
+	.resume = cs4270_i2c_resume,
 };
 
 /*
diff --git a/sound/soc/codecs/spdif_transciever.c b/sound/soc/codecs/spdif_transciever.c
new file mode 100644
index 00000000000..218b33adad9
--- /dev/null
+++ b/sound/soc/codecs/spdif_transciever.c
@@ -0,0 +1,71 @@
+/*
+ * ALSA SoC SPDIF DIT driver
+ *
+ *  This driver is used by controllers which can operate in DIT (SPDI/F) where
+ *  no codec is needed.  This file provides stub codec that can be used
+ *  in these configurations. TI DaVinci Audio controller uses this driver.
+ *
+ * Author:      Steve Chen,  <schen@mvista.com>
+ * Copyright:   (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright:   (C) 2009  Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+
+#include "spdif_transciever.h"
+
+#define STUB_RATES	SNDRV_PCM_RATE_8000_96000
+#define STUB_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
+
+struct snd_soc_dai dit_stub_dai = {
+	.name		= "DIT",
+	.playback 	= {
+		.stream_name	= "Playback",
+		.channels_min	= 1,
+		.channels_max	= 384,
+		.rates		= STUB_RATES,
+		.formats	= STUB_FORMATS,
+	},
+};
+
+static int spdif_dit_probe(struct platform_device *pdev)
+{
+	dit_stub_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&dit_stub_dai);
+}
+
+static int spdif_dit_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&dit_stub_dai);
+	return 0;
+}
+
+static struct platform_driver spdif_dit_driver = {
+	.probe		= spdif_dit_probe,
+	.remove		= spdif_dit_remove,
+	.driver		= {
+		.name	= "spdif-dit",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init dit_modinit(void)
+{
+	return platform_driver_register(&spdif_dit_driver);
+}
+
+static void __exit dit_exit(void)
+{
+	platform_driver_unregister(&spdif_dit_driver);
+}
+
+module_init(dit_modinit);
+module_exit(dit_exit);
+
diff --git a/sound/soc/codecs/spdif_transciever.h b/sound/soc/codecs/spdif_transciever.h
new file mode 100644
index 00000000000..296f2eb6c4e
--- /dev/null
+++ b/sound/soc/codecs/spdif_transciever.h
@@ -0,0 +1,17 @@
+/*
+ * ALSA SoC DIT/DIR driver header
+ *
+ * Author:      Steve Chen,  <schen@mvista.com>
+ * Copyright:   (C) 2008 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef CODEC_STUBS_H
+#define CODEC_STUBS_H
+
+extern struct snd_soc_dai dit_stub_dai;
+
+#endif /* CODEC_STUBS_H */
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 87f606c7682..c550750c79c 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -336,15 +336,17 @@ static int ssm2602_startup(struct snd_pcm_substream *substream,
 			master_runtime->sample_bits,
 			master_runtime->rate);
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
-					     master_runtime->sample_bits,
-					     master_runtime->sample_bits);
+		if (master_runtime->rate != 0)
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						     SNDRV_PCM_HW_PARAM_RATE,
+						     master_runtime->rate,
+						     master_runtime->rate);
+
+		if (master_runtime->sample_bits != 0)
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+						     master_runtime->sample_bits,
+						     master_runtime->sample_bits);
 
 		ssm2602->slave_substream = substream;
 	} else
@@ -372,6 +374,7 @@ static void ssm2602_shutdown(struct snd_pcm_substream *substream,
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct ssm2602_priv *ssm2602 = codec->private_data;
+
 	/* deactivate */
 	if (!codec->active)
 		ssm2602_write(codec, SSM2602_ACTIVE, 0);
@@ -497,11 +500,9 @@ static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
 	return 0;
 }
 
-#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
-		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
-		SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
-		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
-		SNDRV_PCM_RATE_96000)
+#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_32000 |\
+		SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+		SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
 
 #define SSM2602_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
 		SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
new file mode 100644
index 00000000000..8ad4b7b3e3b
--- /dev/null
+++ b/sound/soc/codecs/stac9766.c
@@ -0,0 +1,463 @@
+/*
+ * stac9766.c  --  ALSA SoC STAC9766 codec support
+ *
+ * Copyright 2009 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  Features:-
+ *
+ *   o Support for AC97 Codec, S/PDIF
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-of-simple.h>
+
+#include "stac9766.h"
+
+#define STAC9766_VERSION "0.10"
+
+/*
+ * STAC9766 register cache
+ */
+static const u16 stac9766_reg[] = {
+	0x6A90, 0x8000, 0x8000, 0x8000, /* 6 */
+	0x0000, 0x0000, 0x8008, 0x8008, /* e */
+	0x8808, 0x8808, 0x8808, 0x8808, /* 16 */
+	0x8808, 0x0000, 0x8000, 0x0000, /* 1e */
+	0x0000, 0x0000, 0x0000, 0x000f, /* 26 */
+	0x0a05, 0x0400, 0xbb80, 0x0000, /* 2e */
+	0x0000, 0xbb80, 0x0000, 0x0000, /* 36 */
+	0x0000, 0x2000, 0x0000, 0x0100, /* 3e */
+	0x0000, 0x0000, 0x0080, 0x0000, /* 46 */
+	0x0000, 0x0000, 0x0003, 0xffff, /* 4e */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 56 */
+	0x4000, 0x0000, 0x0000, 0x0000, /* 5e */
+	0x1201, 0xFFFF, 0xFFFF, 0x0000, /* 66 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 6e */
+	0x0000, 0x0000, 0x0000, 0x0006, /* 76 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 7e */
+};
+
+static const char *stac9766_record_mux[] = {"Mic", "CD", "Video", "AUX",
+			"Line", "Stereo Mix", "Mono Mix", "Phone"};
+static const char *stac9766_mono_mux[] = {"Mix", "Mic"};
+static const char *stac9766_mic_mux[] = {"Mic1", "Mic2"};
+static const char *stac9766_SPDIF_mux[] = {"PCM", "ADC Record"};
+static const char *stac9766_popbypass_mux[] = {"Normal", "Bypass Mixer"};
+static const char *stac9766_record_all_mux[] = {"All analog",
+	"Analog plus DAC"};
+static const char *stac9766_boost1[] = {"0dB", "10dB"};
+static const char *stac9766_boost2[] = {"0dB", "20dB"};
+static const char *stac9766_stereo_mic[] = {"Off", "On"};
+
+static const struct soc_enum stac9766_record_enum =
+	SOC_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, stac9766_record_mux);
+static const struct soc_enum stac9766_mono_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 9, 2, stac9766_mono_mux);
+static const struct soc_enum stac9766_mic_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 8, 2, stac9766_mic_mux);
+static const struct soc_enum stac9766_SPDIF_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_DA_CONTROL, 1, 2, stac9766_SPDIF_mux);
+static const struct soc_enum stac9766_popbypass_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, stac9766_popbypass_mux);
+static const struct soc_enum stac9766_record_all_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 12, 2,
+			stac9766_record_all_mux);
+static const struct soc_enum stac9766_boost1_enum =
+	SOC_ENUM_SINGLE(AC97_MIC, 6, 2, stac9766_boost1); /* 0/10dB */
+static const struct soc_enum stac9766_boost2_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 2, 2, stac9766_boost2); /* 0/20dB */
+static const struct soc_enum stac9766_stereo_mic_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_STEREO_MIC, 2, 1, stac9766_stereo_mic);
+
+static const DECLARE_TLV_DB_LINEAR(master_tlv, -4600, 0);
+static const DECLARE_TLV_DB_LINEAR(record_tlv, 0, 2250);
+static const DECLARE_TLV_DB_LINEAR(beep_tlv, -4500, 0);
+static const DECLARE_TLV_DB_LINEAR(mix_tlv, -3450, 1200);
+
+static const struct snd_kcontrol_new stac9766_snd_ac97_controls[] = {
+	SOC_DOUBLE_TLV("Speaker Volume", AC97_MASTER, 8, 0, 31, 1, master_tlv),
+	SOC_SINGLE("Speaker Switch", AC97_MASTER, 15, 1, 1),
+	SOC_DOUBLE_TLV("Headphone Volume", AC97_HEADPHONE, 8, 0, 31, 1,
+		       master_tlv),
+	SOC_SINGLE("Headphone Switch", AC97_HEADPHONE, 15, 1, 1),
+	SOC_SINGLE_TLV("Mono Out Volume", AC97_MASTER_MONO, 0, 31, 1,
+		       master_tlv),
+	SOC_SINGLE("Mono Out Switch", AC97_MASTER_MONO, 15, 1, 1),
+
+	SOC_DOUBLE_TLV("Record Volume", AC97_REC_GAIN, 8, 0, 15, 0, record_tlv),
+	SOC_SINGLE("Record Switch", AC97_REC_GAIN, 15, 1, 1),
+
+
+	SOC_SINGLE_TLV("Beep Volume", AC97_PC_BEEP, 1, 15, 1, beep_tlv),
+	SOC_SINGLE("Beep Switch", AC97_PC_BEEP, 15, 1, 1),
+	SOC_SINGLE("Beep Frequency", AC97_PC_BEEP, 5, 127, 1),
+	SOC_SINGLE_TLV("Phone Volume", AC97_PHONE, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Phone Switch", AC97_PHONE, 15, 1, 1),
+
+	SOC_ENUM("Mic Boost1", stac9766_boost1_enum),
+	SOC_ENUM("Mic Boost2", stac9766_boost2_enum),
+	SOC_SINGLE_TLV("Mic Volume", AC97_MIC, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Mic Switch", AC97_MIC, 15, 1, 1),
+	SOC_ENUM("Stereo Mic", stac9766_stereo_mic_enum),
+
+	SOC_DOUBLE_TLV("Line Volume", AC97_LINE, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Line Switch", AC97_LINE, 15, 1, 1),
+	SOC_DOUBLE_TLV("CD Volume", AC97_CD, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("CD Switch", AC97_CD, 15, 1, 1),
+	SOC_DOUBLE_TLV("AUX Volume", AC97_AUX, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("AUX Switch", AC97_AUX, 15, 1, 1),
+	SOC_DOUBLE_TLV("Video Volume", AC97_VIDEO, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Video Switch", AC97_VIDEO, 15, 1, 1),
+
+	SOC_DOUBLE_TLV("DAC Volume", AC97_PCM, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("DAC Switch", AC97_PCM, 15, 1, 1),
+	SOC_SINGLE("Loopback Test Switch", AC97_GENERAL_PURPOSE, 7, 1, 0),
+	SOC_SINGLE("3D Volume", AC97_3D_CONTROL, 3, 2, 1),
+	SOC_SINGLE("3D Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
+
+	SOC_ENUM("SPDIF Mux", stac9766_SPDIF_enum),
+	SOC_ENUM("Mic1/2 Mux", stac9766_mic_enum),
+	SOC_ENUM("Record All Mux", stac9766_record_all_enum),
+	SOC_ENUM("Record Mux", stac9766_record_enum),
+	SOC_ENUM("Mono Mux", stac9766_mono_enum),
+	SOC_ENUM("Pop Bypass Mux", stac9766_popbypass_enum),
+};
+
+static int stac9766_ac97_write(struct snd_soc_codec *codec, unsigned int reg,
+			       unsigned int val)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg > AC97_STAC_PAGE0) {
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 0);
+		soc_ac97_ops.write(codec->ac97, reg, val);
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
+		return 0;
+	}
+	if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+		return -EIO;
+
+	soc_ac97_ops.write(codec->ac97, reg, val);
+	cache[reg / 2] = val;
+	return 0;
+}
+
+static unsigned int stac9766_ac97_read(struct snd_soc_codec *codec,
+				       unsigned int reg)
+{
+	u16 val = 0, *cache = codec->reg_cache;
+
+	if (reg > AC97_STAC_PAGE0) {
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 0);
+		val = soc_ac97_ops.read(codec->ac97, reg - AC97_STAC_PAGE0);
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
+		return val;
+	}
+	if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+		return -EIO;
+
+	if (reg == AC97_RESET || reg == AC97_GPIO_STATUS ||
+		reg == AC97_INT_PAGING || reg == AC97_VENDOR_ID1 ||
+		reg == AC97_VENDOR_ID2) {
+
+		val = soc_ac97_ops.read(codec->ac97, reg);
+		return val;
+	}
+	return cache[reg / 2];
+}
+
+static int ac97_analog_prepare(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned short reg, vra;
+
+	vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+
+	vra |= 0x1; /* enable variable rate audio */
+
+	stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		reg = AC97_PCM_FRONT_DAC_RATE;
+	else
+		reg = AC97_PCM_LR_ADC_RATE;
+
+	return stac9766_ac97_write(codec, reg, runtime->rate);
+}
+
+static int ac97_digital_prepare(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned short reg, vra;
+
+	stac9766_ac97_write(codec, AC97_SPDIF, 0x2002);
+
+	vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+	vra |= 0x5; /* Enable VRA and SPDIF out */
+
+	stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+
+	reg = AC97_PCM_FRONT_DAC_RATE;
+
+	return stac9766_ac97_write(codec, reg, runtime->rate);
+}
+
+static int ac97_digital_trigger(struct snd_pcm_substream *substream,
+				int cmd, struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	unsigned short vra;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_STOP:
+		vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+		vra &= !0x04;
+		stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+		break;
+	}
+	return 0;
+}
+
+static int stac9766_set_bias_level(struct snd_soc_codec *codec,
+				   enum snd_soc_bias_level level)
+{
+	switch (level) {
+	case SND_SOC_BIAS_ON: /* full On */
+	case SND_SOC_BIAS_PREPARE: /* partial On */
+	case SND_SOC_BIAS_STANDBY: /* Off, with power */
+		stac9766_ac97_write(codec, AC97_POWERDOWN, 0x0000);
+		break;
+	case SND_SOC_BIAS_OFF: /* Off, without power */
+		/* disable everything including AC link */
+		stac9766_ac97_write(codec, AC97_POWERDOWN, 0xffff);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+static int stac9766_reset(struct snd_soc_codec *codec, int try_warm)
+{
+	if (try_warm && soc_ac97_ops.warm_reset) {
+		soc_ac97_ops.warm_reset(codec->ac97);
+		if (stac9766_ac97_read(codec, 0) == stac9766_reg[0])
+			return 1;
+	}
+
+	soc_ac97_ops.reset(codec->ac97);
+	if (soc_ac97_ops.warm_reset)
+		soc_ac97_ops.warm_reset(codec->ac97);
+	if (stac9766_ac97_read(codec, 0) != stac9766_reg[0])
+		return -EIO;
+	return 0;
+}
+
+static int stac9766_codec_suspend(struct platform_device *pdev,
+				  pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int stac9766_codec_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 id, reset;
+
+	reset = 0;
+	/* give the codec an AC97 warm reset to start the link */
+reset:
+	if (reset > 5) {
+		printk(KERN_ERR "stac9766 failed to resume");
+		return -EIO;
+	}
+	codec->ac97->bus->ops->warm_reset(codec->ac97);
+	id = soc_ac97_ops.read(codec->ac97, AC97_VENDOR_ID2);
+	if (id != 0x4c13) {
+		stac9766_reset(codec, 0);
+		reset++;
+		goto reset;
+	}
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
+		stac9766_set_bias_level(codec, SND_SOC_BIAS_ON);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops stac9766_dai_ops_analog = {
+	.prepare = ac97_analog_prepare,
+};
+
+static struct snd_soc_dai_ops stac9766_dai_ops_digital = {
+	.prepare = ac97_digital_prepare,
+	.trigger = ac97_digital_trigger,
+};
+
+struct snd_soc_dai stac9766_dai[] = {
+{
+	.name = "stac9766 analog",
+	.id = 0,
+	.ac97_control = 1,
+
+	/* stream cababilities */
+	.playback = {
+		.stream_name = "stac9766 analog",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SND_SOC_STD_AC97_FMTS,
+	},
+	.capture = {
+		.stream_name = "stac9766 analog",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SND_SOC_STD_AC97_FMTS,
+	},
+	/* alsa ops */
+	.ops = &stac9766_dai_ops_analog,
+},
+{
+	.name = "stac9766 IEC958",
+	.id = 1,
+	.ac97_control = 1,
+
+	/* stream cababilities */
+	.playback = {
+		.stream_name = "stac9766 IEC958",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_32000 | \
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE,
+	},
+	/* alsa ops */
+	.ops = &stac9766_dai_ops_digital,
+}
+};
+EXPORT_SYMBOL_GPL(stac9766_dai);
+
+static int stac9766_codec_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION);
+
+	socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (socdev->card->codec == NULL)
+		return -ENOMEM;
+	codec = socdev->card->codec;
+	mutex_init(&codec->mutex);
+
+	codec->reg_cache = kmemdup(stac9766_reg, sizeof(stac9766_reg),
+				   GFP_KERNEL);
+	if (codec->reg_cache == NULL) {
+		ret = -ENOMEM;
+		goto cache_err;
+	}
+	codec->reg_cache_size = sizeof(stac9766_reg);
+	codec->reg_cache_step = 2;
+
+	codec->name = "STAC9766";
+	codec->owner = THIS_MODULE;
+	codec->dai = stac9766_dai;
+	codec->num_dai = ARRAY_SIZE(stac9766_dai);
+	codec->write = stac9766_ac97_write;
+	codec->read = stac9766_ac97_read;
+	codec->set_bias_level = stac9766_set_bias_level;
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
+	if (ret < 0)
+		goto codec_err;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0)
+		goto pcm_err;
+
+	/* do a cold reset for the controller and then try
+	 * a warm reset followed by an optional cold reset for codec */
+	stac9766_reset(codec, 0);
+	ret = stac9766_reset(codec, 1);
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to reset STAC9766: AC97 link error\n");
+		goto reset_err;
+	}
+
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	snd_soc_add_controls(codec, stac9766_snd_ac97_controls,
+			     ARRAY_SIZE(stac9766_snd_ac97_controls));
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0)
+		goto reset_err;
+	return 0;
+
+reset_err:
+	snd_soc_free_pcms(socdev);
+pcm_err:
+	snd_soc_free_ac97_codec(codec);
+codec_err:
+	kfree(codec->private_data);
+cache_err:
+	kfree(socdev->card->codec);
+	socdev->card->codec = NULL;
+	return ret;
+}
+
+static int stac9766_codec_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	if (codec == NULL)
+		return 0;
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_free_ac97_codec(codec);
+	kfree(codec->reg_cache);
+	kfree(codec);
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_stac9766 = {
+	.probe = stac9766_codec_probe,
+	.remove = stac9766_codec_remove,
+	.suspend = stac9766_codec_suspend,
+	.resume = stac9766_codec_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_stac9766);
+
+MODULE_DESCRIPTION("ASoC stac9766 driver");
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/stac9766.h b/sound/soc/codecs/stac9766.h
new file mode 100644
index 00000000000..65642eb8393
--- /dev/null
+++ b/sound/soc/codecs/stac9766.h
@@ -0,0 +1,21 @@
+/*
+ * stac9766.h  --  STAC9766 Soc Audio driver
+ */
+
+#ifndef _STAC9766_H
+#define _STAC9766_H
+
+#define AC97_STAC_PAGE0 0x1000
+#define AC97_STAC_DA_CONTROL (AC97_STAC_PAGE0 | 0x6A)
+#define AC97_STAC_ANALOG_SPECIAL (AC97_STAC_PAGE0 | 0x6E)
+#define AC97_STAC_STEREO_MIC 0x78
+
+/* STAC9766 DAI ID's */
+#define STAC9766_DAI_AC97_ANALOG		0
+#define STAC9766_DAI_AC97_DIGITAL		1
+
+extern struct snd_soc_dai stac9766_dai[];
+extern struct snd_soc_codec_device soc_codec_dev_stac9766;
+
+
+#endif
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index c3f4afb5d01..0b8dcb5cd72 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -86,7 +86,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
 	 */
 
 	if ((reg < 0 || reg > 9) && (reg != 15)) {
-		printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg);
+		printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
 		return -1;
 	}
 
@@ -98,7 +98,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
 	if (codec->hw_write(codec->control_data, data, 2) == 2)
 		return 0;
 
-	printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__,
+	printk(KERN_ERR "%s cannot write %03x to register R%u\n", __func__,
 	       value, reg);
 
 	return -EIO;
@@ -273,14 +273,14 @@ static const unsigned short sr_valid_mask[] = {
  * Every divisor is a factor of 11*12
  */
 #define SR_MULT (11*12)
-#define A(x) (x) ? (SR_MULT/x) : 0
+#define A(x) (SR_MULT/x)
 static const unsigned char sr_adc_mult_table[] = {
-	A(2), A(2), A(12), A(12),  A(0), A(0), A(3), A(1),
-	A(2), A(2), A(11), A(11),  A(0), A(0), A(0), A(1)
+	A(2), A(2), A(12), A(12),  0, 0, A(3), A(1),
+	A(2), A(2), A(11), A(11),  0, 0, 0, A(1)
 };
 static const unsigned char sr_dac_mult_table[] = {
-	A(2), A(12), A(2), A(12),  A(0), A(0), A(3), A(1),
-	A(2), A(11), A(2), A(11),  A(0), A(0), A(0), A(1)
+	A(2), A(12), A(2), A(12),  0, 0, A(3), A(1),
+	A(2), A(11), A(2), A(11),  0, 0, 0, A(1)
 };
 
 static unsigned get_score(int adc, int adc_l, int adc_h, int need_adc,
@@ -523,6 +523,8 @@ static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_I2S:
 		iface_reg |= TLV320AIC23_FOR_I2S;
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface_reg |= TLV320AIC23_LRP_ON;
 	case SND_SOC_DAIFMT_DSP_B:
 		iface_reg |= TLV320AIC23_FOR_DSP;
 		break;
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index df7c8c281d2..4dbb853eef5 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -115,6 +115,7 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
 	0x00, /* REG_VIBRA_PWM_SET	(0x47)	*/
 	0x00, /* REG_ANAMIC_GAIN	(0x48)	*/
 	0x00, /* REG_MISC_SET_2		(0x49)	*/
+	0x00, /* REG_SW_SHADOW		(0x4A)	- Shadow, non HW register */
 };
 
 /* codec private data */
@@ -125,6 +126,17 @@ struct twl4030_priv {
 
 	struct snd_pcm_substream *master_substream;
 	struct snd_pcm_substream *slave_substream;
+
+	unsigned int configured;
+	unsigned int rate;
+	unsigned int sample_bits;
+	unsigned int channels;
+
+	unsigned int sysclk;
+
+	/* Headset output state handling */
+	unsigned int hsl_enabled;
+	unsigned int hsr_enabled;
 };
 
 /*
@@ -161,7 +173,11 @@ static int twl4030_write(struct snd_soc_codec *codec,
 			unsigned int reg, unsigned int value)
 {
 	twl4030_write_reg_cache(codec, reg, value);
-	return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg);
+	if (likely(reg < TWL4030_REG_SW_SHADOW))
+		return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value,
+					    reg);
+	else
+		return 0;
 }
 
 static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
@@ -188,6 +204,7 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
 
 static void twl4030_init_chip(struct snd_soc_codec *codec)
 {
+	u8 *cache = codec->reg_cache;
 	int i;
 
 	/* clear CODECPDZ prior to setting register defaults */
@@ -195,7 +212,7 @@ static void twl4030_init_chip(struct snd_soc_codec *codec)
 
 	/* set all audio section registers to reasonable defaults */
 	for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
-		twl4030_write(codec, i,	twl4030_reg[i]);
+		twl4030_write(codec, i,	cache[i]);
 
 }
 
@@ -232,7 +249,7 @@ static void twl4030_codec_mute(struct snd_soc_codec *codec, int mute)
 					TWL4030_REG_PRECKL_CTL);
 		reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL);
 		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
-					reg_val & (~TWL4030_PRECKL_GAIN),
+					reg_val & (~TWL4030_PRECKR_GAIN),
 					TWL4030_REG_PRECKR_CTL);
 
 		/* Disable PLL */
@@ -316,104 +333,60 @@ static void twl4030_power_down(struct snd_soc_codec *codec)
 }
 
 /* Earpiece */
-static const char *twl4030_earpiece_texts[] =
-		{"Off", "DACL1", "DACL2", "DACR1"};
-
-static const unsigned int twl4030_earpiece_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_earpiece_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_earpiece_texts),
-			twl4030_earpiece_texts,
-			twl4030_earpiece_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_earpiece_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_earpiece_enum);
+static const struct snd_kcontrol_new twl4030_dapm_earpiece_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_EAR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_EAR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_EAR_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_EAR_CTL, 3, 1, 0),
+};
 
 /* PreDrive Left */
-static const char *twl4030_predrivel_texts[] =
-		{"Off", "DACL1", "DACL2", "DACR2"};
-
-static const unsigned int twl4030_predrivel_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_predrivel_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_predrivel_texts),
-			twl4030_predrivel_texts,
-			twl4030_predrivel_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_predrivel_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_predrivel_enum);
+static const struct snd_kcontrol_new twl4030_dapm_predrivel_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDL_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PREDL_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDL_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDL_CTL, 3, 1, 0),
+};
 
 /* PreDrive Right */
-static const char *twl4030_predriver_texts[] =
-		{"Off", "DACR1", "DACR2", "DACL2"};
-
-static const unsigned int twl4030_predriver_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_predriver_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_predriver_texts),
-			twl4030_predriver_texts,
-			twl4030_predriver_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_predriver_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_predriver_enum);
+static const struct snd_kcontrol_new twl4030_dapm_predriver_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PREDR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDR_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDR_CTL, 3, 1, 0),
+};
 
 /* Headset Left */
-static const char *twl4030_hsol_texts[] =
-		{"Off", "DACL1", "DACL2"};
-
-static const struct soc_enum twl4030_hsol_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1,
-			ARRAY_SIZE(twl4030_hsol_texts),
-			twl4030_hsol_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_hsol_control =
-SOC_DAPM_ENUM("Route", twl4030_hsol_enum);
+static const struct snd_kcontrol_new twl4030_dapm_hsol_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_HS_SEL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_HS_SEL, 2, 1, 0),
+};
 
 /* Headset Right */
-static const char *twl4030_hsor_texts[] =
-		{"Off", "DACR1", "DACR2"};
-
-static const struct soc_enum twl4030_hsor_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4,
-			ARRAY_SIZE(twl4030_hsor_texts),
-			twl4030_hsor_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_hsor_control =
-SOC_DAPM_ENUM("Route", twl4030_hsor_enum);
+static const struct snd_kcontrol_new twl4030_dapm_hsor_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 3, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_HS_SEL, 4, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_HS_SEL, 5, 1, 0),
+};
 
 /* Carkit Left */
-static const char *twl4030_carkitl_texts[] =
-		{"Off", "DACL1", "DACL2"};
-
-static const struct soc_enum twl4030_carkitl_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1,
-			ARRAY_SIZE(twl4030_carkitl_texts),
-			twl4030_carkitl_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_carkitl_control =
-SOC_DAPM_ENUM("Route", twl4030_carkitl_enum);
+static const struct snd_kcontrol_new twl4030_dapm_carkitl_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKL_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PRECKL_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PRECKL_CTL, 2, 1, 0),
+};
 
 /* Carkit Right */
-static const char *twl4030_carkitr_texts[] =
-		{"Off", "DACR1", "DACR2"};
-
-static const struct soc_enum twl4030_carkitr_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1,
-			ARRAY_SIZE(twl4030_carkitr_texts),
-			twl4030_carkitr_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_carkitr_control =
-SOC_DAPM_ENUM("Route", twl4030_carkitr_enum);
+static const struct snd_kcontrol_new twl4030_dapm_carkitr_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PRECKR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PRECKR_CTL, 2, 1, 0),
+};
 
 /* Handsfree Left */
 static const char *twl4030_handsfreel_texts[] =
-		{"Voice", "DACL1", "DACL2", "DACR2"};
+		{"Voice", "AudioL1", "AudioL2", "AudioR2"};
 
 static const struct soc_enum twl4030_handsfreel_enum =
 	SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0,
@@ -423,9 +396,13 @@ static const struct soc_enum twl4030_handsfreel_enum =
 static const struct snd_kcontrol_new twl4030_dapm_handsfreel_control =
 SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum);
 
+/* Handsfree Left virtual mute */
+static const struct snd_kcontrol_new twl4030_dapm_handsfreelmute_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 0, 1, 0);
+
 /* Handsfree Right */
 static const char *twl4030_handsfreer_texts[] =
-		{"Voice", "DACR1", "DACR2", "DACL2"};
+		{"Voice", "AudioR1", "AudioR2", "AudioL2"};
 
 static const struct soc_enum twl4030_handsfreer_enum =
 	SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0,
@@ -435,37 +412,48 @@ static const struct soc_enum twl4030_handsfreer_enum =
 static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control =
 SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum);
 
-/* Left analog microphone selection */
-static const char *twl4030_analoglmic_texts[] =
-		{"Off", "Main mic", "Headset mic", "AUXL", "Carkit mic"};
+/* Handsfree Right virtual mute */
+static const struct snd_kcontrol_new twl4030_dapm_handsfreermute_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 1, 1, 0);
 
-static const unsigned int twl4030_analoglmic_values[] =
-		{0x0, 0x1, 0x2, 0x4, 0x8};
+/* Vibra */
+/* Vibra audio path selection */
+static const char *twl4030_vibra_texts[] =
+		{"AudioL1", "AudioR1", "AudioL2", "AudioR2"};
 
-static const struct soc_enum twl4030_analoglmic_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICL, 0, 0xf,
-			ARRAY_SIZE(twl4030_analoglmic_texts),
-			twl4030_analoglmic_texts,
-			twl4030_analoglmic_values);
+static const struct soc_enum twl4030_vibra_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 2,
+			ARRAY_SIZE(twl4030_vibra_texts),
+			twl4030_vibra_texts);
 
-static const struct snd_kcontrol_new twl4030_dapm_analoglmic_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_analoglmic_enum);
+static const struct snd_kcontrol_new twl4030_dapm_vibra_control =
+SOC_DAPM_ENUM("Route", twl4030_vibra_enum);
 
-/* Right analog microphone selection */
-static const char *twl4030_analogrmic_texts[] =
-		{"Off", "Sub mic", "AUXR"};
+/* Vibra path selection: local vibrator (PWM) or audio driven */
+static const char *twl4030_vibrapath_texts[] =
+		{"Local vibrator", "Audio"};
 
-static const unsigned int twl4030_analogrmic_values[] =
-		{0x0, 0x1, 0x4};
+static const struct soc_enum twl4030_vibrapath_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 4,
+			ARRAY_SIZE(twl4030_vibrapath_texts),
+			twl4030_vibrapath_texts);
 
-static const struct soc_enum twl4030_analogrmic_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICR, 0, 0x5,
-			ARRAY_SIZE(twl4030_analogrmic_texts),
-			twl4030_analogrmic_texts,
-			twl4030_analogrmic_values);
+static const struct snd_kcontrol_new twl4030_dapm_vibrapath_control =
+SOC_DAPM_ENUM("Route", twl4030_vibrapath_enum);
 
-static const struct snd_kcontrol_new twl4030_dapm_analogrmic_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_analogrmic_enum);
+/* Left analog microphone selection */
+static const struct snd_kcontrol_new twl4030_dapm_analoglmic_controls[] = {
+	SOC_DAPM_SINGLE("Main mic", TWL4030_REG_ANAMICL, 0, 1, 0),
+	SOC_DAPM_SINGLE("Headset mic", TWL4030_REG_ANAMICL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AUXL", TWL4030_REG_ANAMICL, 2, 1, 0),
+	SOC_DAPM_SINGLE("Carkit mic", TWL4030_REG_ANAMICL, 3, 1, 0),
+};
+
+/* Right analog microphone selection */
+static const struct snd_kcontrol_new twl4030_dapm_analogrmic_controls[] = {
+	SOC_DAPM_SINGLE("Sub mic", TWL4030_REG_ANAMICR, 0, 1, 0),
+	SOC_DAPM_SINGLE("AUXR", TWL4030_REG_ANAMICR, 2, 1, 0),
+};
 
 /* TX1 L/R Analog/Digital microphone selection */
 static const char *twl4030_micpathtx1_texts[] =
@@ -507,6 +495,10 @@ static const struct snd_kcontrol_new twl4030_dapm_abypassr2_control =
 static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control =
 	SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL2_APGA_CTL, 2, 1, 0);
 
+/* Analog bypass for Voice */
+static const struct snd_kcontrol_new twl4030_dapm_abypassv_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_VDL_APGA_CTL, 2, 1, 0);
+
 /* Digital bypass gain, 0 mutes the bypass */
 static const unsigned int twl4030_dapm_dbypass_tlv[] = {
 	TLV_DB_RANGE_HEAD(2),
@@ -526,6 +518,18 @@ static const struct snd_kcontrol_new twl4030_dapm_dbypassr_control =
 			TWL4030_REG_ATX2ARXPGA, 0, 7, 0,
 			twl4030_dapm_dbypass_tlv);
 
+/*
+ * Voice Sidetone GAIN volume control:
+ * from -51 to -10 dB in 1 dB steps (mute instead of -51 dB)
+ */
+static DECLARE_TLV_DB_SCALE(twl4030_dapm_dbypassv_tlv, -5100, 100, 1);
+
+/* Digital bypass voice: sidetone (VUL -> VDL)*/
+static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control =
+	SOC_DAPM_SINGLE_TLV("Volume",
+			TWL4030_REG_VSTPGA, 0, 0x29, 0,
+			twl4030_dapm_dbypassv_tlv);
+
 static int micpath_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
@@ -556,63 +560,143 @@ static int micpath_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
-static int handsfree_event(struct snd_soc_dapm_widget *w,
-		struct snd_kcontrol *kcontrol, int event)
+static void handsfree_ramp(struct snd_soc_codec *codec, int reg, int ramp)
 {
-	struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
 	unsigned char hs_ctl;
 
-	hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
+	hs_ctl = twl4030_read_reg_cache(codec, reg);
 
-	if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
+	if (ramp) {
+		/* HF ramp-up */
+		hs_ctl |= TWL4030_HF_CTL_REF_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(10);
 		hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(40);
 		hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
 		hs_ctl |= TWL4030_HF_CTL_HB_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		twl4030_write(codec, reg, hs_ctl);
 	} else {
-		hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
-				| TWL4030_HF_CTL_HB_EN);
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		/* HF ramp-down */
+		hs_ctl &= ~TWL4030_HF_CTL_LOOP_EN;
+		hs_ctl &= ~TWL4030_HF_CTL_HB_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		hs_ctl &= ~TWL4030_HF_CTL_RAMP_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(40);
+		hs_ctl &= ~TWL4030_HF_CTL_REF_EN;
+		twl4030_write(codec, reg, hs_ctl);
 	}
+}
 
+static int handsfreelpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 0);
+		break;
+	}
 	return 0;
 }
 
-static int headsetl_event(struct snd_soc_dapm_widget *w,
+static int handsfreerpga_event(struct snd_soc_dapm_widget *w,
 		struct snd_kcontrol *kcontrol, int event)
 {
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 0);
+		break;
+	}
+	return 0;
+}
+
+static void headset_ramp(struct snd_soc_codec *codec, int ramp)
+{
 	unsigned char hs_gain, hs_pop;
+	struct twl4030_priv *twl4030 = codec->private_data;
+	/* Base values for ramp delay calculation: 2^19 - 2^26 */
+	unsigned int ramp_base[] = {524288, 1048576, 2097152, 4194304,
+				    8388608, 16777216, 33554432, 67108864};
 
-	/* Save the current volume */
-	hs_gain = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_GAIN_SET);
-	hs_pop = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_POPN_SET);
+	hs_gain = twl4030_read_reg_cache(codec, TWL4030_REG_HS_GAIN_SET);
+	hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
 
-	switch (event) {
-	case SND_SOC_DAPM_POST_PMU:
-		/* Do the anti-pop/bias ramp enable according to the TRM */
+	if (ramp) {
+		/* Headset ramp-up according to the TRM */
 		hs_pop |= TWL4030_VMID_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-		/* Is this needed? Can we just use whatever gain here? */
-		twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET,
-				(hs_gain & (~0x0f)) | 0x0a);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
 		hs_pop |= TWL4030_RAMP_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-
-		/* Restore the original volume */
-		twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
-		break;
-	case SND_SOC_DAPM_POST_PMD:
-		/* Do the anti-pop/bias ramp disable according to the TRM */
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	} else {
+		/* Headset ramp-down _not_ according to
+		 * the TRM, but in a way that it is working */
 		hs_pop &= ~TWL4030_RAMP_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		/* Wait ramp delay time + 1, so the VMID can settle */
+		mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] /
+			twl4030->sysclk) + 1);
 		/* Bypass the reg_cache to mute the headset */
 		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
 					hs_gain & (~0x0f),
 					TWL4030_REG_HS_GAIN_SET);
+
 		hs_pop &= ~TWL4030_VMID_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	}
+}
+
+static int headsetlpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = w->codec->private_data;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Do the ramp-up only once */
+		if (!twl4030->hsr_enabled)
+			headset_ramp(w->codec, 1);
+
+		twl4030->hsl_enabled = 1;
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		/* Do the ramp-down only if both headsetL/R is disabled */
+		if (!twl4030->hsr_enabled)
+			headset_ramp(w->codec, 0);
+
+		twl4030->hsl_enabled = 0;
+		break;
+	}
+	return 0;
+}
+
+static int headsetrpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = w->codec->private_data;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Do the ramp-up only once */
+		if (!twl4030->hsl_enabled)
+			headset_ramp(w->codec, 1);
+
+		twl4030->hsr_enabled = 1;
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		/* Do the ramp-down only if both headsetL/R is disabled */
+		if (!twl4030->hsl_enabled)
+			headset_ramp(w->codec, 0);
+
+		twl4030->hsr_enabled = 0;
 		break;
 	}
 	return 0;
@@ -624,7 +708,7 @@ static int bypass_event(struct snd_soc_dapm_widget *w,
 	struct soc_mixer_control *m =
 		(struct soc_mixer_control *)w->kcontrols->private_value;
 	struct twl4030_priv *twl4030 = w->codec->private_data;
-	unsigned char reg;
+	unsigned char reg, misc;
 
 	reg = twl4030_read_reg_cache(w->codec, m->reg);
 
@@ -636,14 +720,34 @@ static int bypass_event(struct snd_soc_dapm_widget *w,
 		else
 			twl4030->bypass_state &=
 				~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL));
+	} else if (m->reg == TWL4030_REG_VDL_APGA_CTL) {
+		/* Analog voice bypass */
+		if (reg & (1 << m->shift))
+			twl4030->bypass_state |= (1 << 4);
+		else
+			twl4030->bypass_state &= ~(1 << 4);
+	} else if (m->reg == TWL4030_REG_VSTPGA) {
+		/* Voice digital bypass */
+		if (reg)
+			twl4030->bypass_state |= (1 << 5);
+		else
+			twl4030->bypass_state &= ~(1 << 5);
 	} else {
 		/* Digital bypass */
 		if (reg & (0x7 << m->shift))
-			twl4030->bypass_state |= (1 << (m->shift ? 5 : 4));
+			twl4030->bypass_state |= (1 << (m->shift ? 7 : 6));
 		else
-			twl4030->bypass_state &= ~(1 << (m->shift ? 5 : 4));
+			twl4030->bypass_state &= ~(1 << (m->shift ? 7 : 6));
 	}
 
+	/* Enable master analog loopback mode if any analog switch is enabled*/
+	misc = twl4030_read_reg_cache(w->codec, TWL4030_REG_MISC_SET_1);
+	if (twl4030->bypass_state & 0x1F)
+		misc |= TWL4030_FMLOOP_EN;
+	else
+		misc &= ~TWL4030_FMLOOP_EN;
+	twl4030_write(w->codec, TWL4030_REG_MISC_SET_1, misc);
+
 	if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) {
 		if (twl4030->bypass_state)
 			twl4030_codec_mute(w->codec, 0);
@@ -810,6 +914,48 @@ static int snd_soc_put_volsw_r2_twl4030(struct snd_kcontrol *kcontrol,
 	return err;
 }
 
+/* Codec operation modes */
+static const char *twl4030_op_modes_texts[] = {
+	"Option 2 (voice/audio)", "Option 1 (audio)"
+};
+
+static const struct soc_enum twl4030_op_modes_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_CODEC_MODE, 0,
+			ARRAY_SIZE(twl4030_op_modes_texts),
+			twl4030_op_modes_texts);
+
+int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct twl4030_priv *twl4030 = codec->private_data;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned short val;
+	unsigned short mask, bitmask;
+
+	if (twl4030->configured) {
+		printk(KERN_ERR "twl4030 operation mode cannot be "
+			"changed on-the-fly\n");
+		return -EBUSY;
+	}
+
+	for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
+		;
+	if (ucontrol->value.enumerated.item[0] > e->max - 1)
+		return -EINVAL;
+
+	val = ucontrol->value.enumerated.item[0] << e->shift_l;
+	mask = (bitmask - 1) << e->shift_l;
+	if (e->shift_l != e->shift_r) {
+		if (ucontrol->value.enumerated.item[1] > e->max - 1)
+			return -EINVAL;
+		val |= ucontrol->value.enumerated.item[1] << e->shift_r;
+		mask |= (bitmask - 1) << e->shift_r;
+	}
+
+	return snd_soc_update_bits(codec, e->reg, mask, val);
+}
+
 /*
  * FGAIN volume control:
  * from -62 to 0 dB in 1 dB steps (mute instead of -63 dB)
@@ -824,6 +970,12 @@ static DECLARE_TLV_DB_SCALE(digital_fine_tlv, -6300, 100, 1);
 static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0);
 
 /*
+ * Voice Downlink GAIN volume control:
+ * from -37 to 12 dB in 1 dB steps (mute instead of -37 dB)
+ */
+static DECLARE_TLV_DB_SCALE(digital_voice_downlink_tlv, -3700, 100, 1);
+
+/*
  * Analog playback gain
  * -24 dB to 12 dB in 2 dB steps
  */
@@ -864,7 +1016,32 @@ static const struct soc_enum twl4030_rampdelay_enum =
 			ARRAY_SIZE(twl4030_rampdelay_texts),
 			twl4030_rampdelay_texts);
 
+/* Vibra H-bridge direction mode */
+static const char *twl4030_vibradirmode_texts[] = {
+	"Vibra H-bridge direction", "Audio data MSB",
+};
+
+static const struct soc_enum twl4030_vibradirmode_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 5,
+			ARRAY_SIZE(twl4030_vibradirmode_texts),
+			twl4030_vibradirmode_texts);
+
+/* Vibra H-bridge direction */
+static const char *twl4030_vibradir_texts[] = {
+	"Positive polarity", "Negative polarity",
+};
+
+static const struct soc_enum twl4030_vibradir_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 1,
+			ARRAY_SIZE(twl4030_vibradir_texts),
+			twl4030_vibradir_texts);
+
 static const struct snd_kcontrol_new twl4030_snd_controls[] = {
+	/* Codec operation mode control */
+	SOC_ENUM_EXT("Codec Operation Mode", twl4030_op_modes_enum,
+		snd_soc_get_enum_double,
+		snd_soc_put_twl4030_opmode_enum_double),
+
 	/* Common playback gain controls */
 	SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume",
 		TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
@@ -893,6 +1070,16 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = {
 		TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
 		1, 1, 0),
 
+	/* Common voice downlink gain controls */
+	SOC_SINGLE_TLV("DAC Voice Digital Downlink Volume",
+		TWL4030_REG_VRXPGA, 0, 0x31, 0, digital_voice_downlink_tlv),
+
+	SOC_SINGLE_TLV("DAC Voice Analog Downlink Volume",
+		TWL4030_REG_VDL_APGA_CTL, 3, 0x12, 1, analog_tlv),
+
+	SOC_SINGLE("DAC Voice Analog Downlink Switch",
+		TWL4030_REG_VDL_APGA_CTL, 1, 1, 0),
+
 	/* Separate output gain controls */
 	SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume",
 		TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL,
@@ -920,6 +1107,9 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = {
 		0, 3, 5, 0, input_gain_tlv),
 
 	SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum),
+
+	SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum),
+	SOC_ENUM("Vibra H-bridge direction", twl4030_vibradir_enum),
 };
 
 static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
@@ -947,26 +1137,19 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("CARKITR"),
 	SND_SOC_DAPM_OUTPUT("HFL"),
 	SND_SOC_DAPM_OUTPUT("HFR"),
+	SND_SOC_DAPM_OUTPUT("VIBRA"),
 
 	/* DACs */
-	SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback",
+	SND_SOC_DAPM_DAC("DAC Right1", "Right Front HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback",
+	SND_SOC_DAPM_DAC("DAC Left1", "Left Front HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback",
+	SND_SOC_DAPM_DAC("DAC Right2", "Right Rear HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback",
+	SND_SOC_DAPM_DAC("DAC Left2", "Left Rear HiFi Playback",
+			SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC("DAC Voice", "Voice Playback",
 			SND_SOC_NOPM, 0, 0),
-
-	/* Analog PGAs */
-	SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXL1_APGA", TWL4030_REG_ARXL1_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXR2_APGA", TWL4030_REG_ARXR2_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL,
-			0, 0, NULL, 0),
 
 	/* Analog bypasses */
 	SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0,
@@ -981,6 +1164,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_SWITCH_E("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0,
 			&twl4030_dapm_abypassl2_control,
 			bypass_event, SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("Voice Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassv_control,
+			bypass_event, SND_SOC_DAPM_POST_REG),
 
 	/* Digital bypasses */
 	SND_SOC_DAPM_SWITCH_E("Left Digital Loopback", SND_SOC_NOPM, 0, 0,
@@ -989,43 +1175,88 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0,
 			&twl4030_dapm_dbypassr_control, bypass_event,
 			SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("Voice Digital Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_dbypassv_control, bypass_event,
+			SND_SOC_DAPM_POST_REG),
 
-	SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			1, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			2, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			3, 0, NULL, 0),
-
-	/* Output MUX controls */
+	/* Digital mixers, power control for the physical DACs */
+	SND_SOC_DAPM_MIXER("Digital R1 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital L1 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 1, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital R2 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 2, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital L2 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 3, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital Voice Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 4, 0, NULL, 0),
+
+	/* Analog mixers, power control for the physical PGAs */
+	SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer",
+			TWL4030_REG_ARXR1_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer",
+			TWL4030_REG_ARXL1_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer",
+			TWL4030_REG_ARXR2_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer",
+			TWL4030_REG_ARXL2_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog Voice Playback Mixer",
+			TWL4030_REG_VDL_APGA_CTL, 0, 0, NULL, 0),
+
+	/* Output MIXER controls */
 	/* Earpiece */
-	SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_earpiece_control),
+	SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_earpiece_controls[0],
+			ARRAY_SIZE(twl4030_dapm_earpiece_controls)),
 	/* PreDrivL/R */
-	SND_SOC_DAPM_VALUE_MUX("PredriveL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_predrivel_control),
-	SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_predriver_control),
+	SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_predrivel_controls[0],
+			ARRAY_SIZE(twl4030_dapm_predrivel_controls)),
+	SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_predriver_controls[0],
+			ARRAY_SIZE(twl4030_dapm_predriver_controls)),
 	/* HeadsetL/R */
-	SND_SOC_DAPM_MUX_E("HeadsetL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_hsol_control, headsetl_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_hsor_control),
+	SND_SOC_DAPM_MIXER("HeadsetL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_hsol_controls[0],
+			ARRAY_SIZE(twl4030_dapm_hsol_controls)),
+	SND_SOC_DAPM_PGA_E("HeadsetL PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, headsetlpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MIXER("HeadsetR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_hsor_controls[0],
+			ARRAY_SIZE(twl4030_dapm_hsor_controls)),
+	SND_SOC_DAPM_PGA_E("HeadsetR PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, headsetrpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
 	/* CarkitL/R */
-	SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_carkitl_control),
-	SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_carkitr_control),
+	SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_carkitl_controls[0],
+			ARRAY_SIZE(twl4030_dapm_carkitl_controls)),
+	SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_carkitr_controls[0],
+			ARRAY_SIZE(twl4030_dapm_carkitr_controls)),
+
+	/* Output MUX controls */
 	/* HandsfreeL/R */
-	SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
-		&twl4030_dapm_handsfreel_control, handsfree_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
-		&twl4030_dapm_handsfreer_control, handsfree_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MUX("HandsfreeL Mux", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_handsfreel_control),
+	SND_SOC_DAPM_SWITCH("HandsfreeL Switch", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_handsfreelmute_control),
+	SND_SOC_DAPM_PGA_E("HandsfreeL PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, handsfreelpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MUX("HandsfreeR Mux", SND_SOC_NOPM, 5, 0,
+		&twl4030_dapm_handsfreer_control),
+	SND_SOC_DAPM_SWITCH("HandsfreeR Switch", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_handsfreermute_control),
+	SND_SOC_DAPM_PGA_E("HandsfreeR PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, handsfreerpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	/* Vibra */
+	SND_SOC_DAPM_MUX("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0,
+		&twl4030_dapm_vibra_control),
+	SND_SOC_DAPM_MUX("Vibra Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_vibrapath_control),
 
 	/* Introducing four virtual ADC, since TWL4030 have four channel for
 	   capture */
@@ -1050,11 +1281,15 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
 		SND_SOC_DAPM_POST_REG),
 
-	/* Analog input muxes with switch for the capture amplifiers */
-	SND_SOC_DAPM_VALUE_MUX("Analog Left Capture Route",
-		TWL4030_REG_ANAMICL, 4, 0, &twl4030_dapm_analoglmic_control),
-	SND_SOC_DAPM_VALUE_MUX("Analog Right Capture Route",
-		TWL4030_REG_ANAMICR, 4, 0, &twl4030_dapm_analogrmic_control),
+	/* Analog input mixers for the capture amplifiers */
+	SND_SOC_DAPM_MIXER("Analog Left Capture Route",
+		TWL4030_REG_ANAMICL, 4, 0,
+		&twl4030_dapm_analoglmic_controls[0],
+		ARRAY_SIZE(twl4030_dapm_analoglmic_controls)),
+	SND_SOC_DAPM_MIXER("Analog Right Capture Route",
+		TWL4030_REG_ANAMICR, 4, 0,
+		&twl4030_dapm_analogrmic_controls[0],
+		ARRAY_SIZE(twl4030_dapm_analogrmic_controls)),
 
 	SND_SOC_DAPM_PGA("ADC Physical Left",
 		TWL4030_REG_AVADC_CTL, 3, 0, NULL, 0),
@@ -1073,62 +1308,86 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 };
 
 static const struct snd_soc_dapm_route intercon[] = {
-	{"Analog L1 Playback Mixer", NULL, "DAC Left1"},
-	{"Analog R1 Playback Mixer", NULL, "DAC Right1"},
-	{"Analog L2 Playback Mixer", NULL, "DAC Left2"},
-	{"Analog R2 Playback Mixer", NULL, "DAC Right2"},
-
-	{"ARXL1_APGA", NULL, "Analog L1 Playback Mixer"},
-	{"ARXR1_APGA", NULL, "Analog R1 Playback Mixer"},
-	{"ARXL2_APGA", NULL, "Analog L2 Playback Mixer"},
-	{"ARXR2_APGA", NULL, "Analog R2 Playback Mixer"},
+	{"Digital L1 Playback Mixer", NULL, "DAC Left1"},
+	{"Digital R1 Playback Mixer", NULL, "DAC Right1"},
+	{"Digital L2 Playback Mixer", NULL, "DAC Left2"},
+	{"Digital R2 Playback Mixer", NULL, "DAC Right2"},
+	{"Digital Voice Playback Mixer", NULL, "DAC Voice"},
+
+	{"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"},
+	{"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"},
+	{"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"},
+	{"Analog R2 Playback Mixer", NULL, "Digital R2 Playback Mixer"},
+	{"Analog Voice Playback Mixer", NULL, "Digital Voice Playback Mixer"},
 
 	/* Internal playback routings */
 	/* Earpiece */
-	{"Earpiece Mux", "DACL1", "ARXL1_APGA"},
-	{"Earpiece Mux", "DACL2", "ARXL2_APGA"},
-	{"Earpiece Mux", "DACR1", "ARXR1_APGA"},
+	{"Earpiece Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"Earpiece Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"Earpiece Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"Earpiece Mixer", "AudioR1", "Analog R1 Playback Mixer"},
 	/* PreDrivL */
-	{"PredriveL Mux", "DACL1", "ARXL1_APGA"},
-	{"PredriveL Mux", "DACL2", "ARXL2_APGA"},
-	{"PredriveL Mux", "DACR2", "ARXR2_APGA"},
+	{"PredriveL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"PredriveL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"PredriveL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"PredriveL Mixer", "AudioR2", "Analog R2 Playback Mixer"},
 	/* PreDrivR */
-	{"PredriveR Mux", "DACR1", "ARXR1_APGA"},
-	{"PredriveR Mux", "DACR2", "ARXR2_APGA"},
-	{"PredriveR Mux", "DACL2", "ARXL2_APGA"},
+	{"PredriveR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"PredriveR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"PredriveR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+	{"PredriveR Mixer", "AudioL2", "Analog L2 Playback Mixer"},
 	/* HeadsetL */
-	{"HeadsetL Mux", "DACL1", "ARXL1_APGA"},
-	{"HeadsetL Mux", "DACL2", "ARXL2_APGA"},
+	{"HeadsetL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"HeadsetL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"HeadsetL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HeadsetL PGA", NULL, "HeadsetL Mixer"},
 	/* HeadsetR */
-	{"HeadsetR Mux", "DACR1", "ARXR1_APGA"},
-	{"HeadsetR Mux", "DACR2", "ARXR2_APGA"},
+	{"HeadsetR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"HeadsetR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"HeadsetR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HeadsetR PGA", NULL, "HeadsetR Mixer"},
 	/* CarkitL */
-	{"CarkitL Mux", "DACL1", "ARXL1_APGA"},
-	{"CarkitL Mux", "DACL2", "ARXL2_APGA"},
+	{"CarkitL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"CarkitL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"CarkitL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
 	/* CarkitR */
-	{"CarkitR Mux", "DACR1", "ARXR1_APGA"},
-	{"CarkitR Mux", "DACR2", "ARXR2_APGA"},
+	{"CarkitR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"CarkitR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"CarkitR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
 	/* HandsfreeL */
-	{"HandsfreeL Mux", "DACL1", "ARXL1_APGA"},
-	{"HandsfreeL Mux", "DACL2", "ARXL2_APGA"},
-	{"HandsfreeL Mux", "DACR2", "ARXR2_APGA"},
+	{"HandsfreeL Mux", "Voice", "Analog Voice Playback Mixer"},
+	{"HandsfreeL Mux", "AudioL1", "Analog L1 Playback Mixer"},
+	{"HandsfreeL Mux", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HandsfreeL Mux", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HandsfreeL Switch", "Switch", "HandsfreeL Mux"},
+	{"HandsfreeL PGA", NULL, "HandsfreeL Switch"},
 	/* HandsfreeR */
-	{"HandsfreeR Mux", "DACR1", "ARXR1_APGA"},
-	{"HandsfreeR Mux", "DACR2", "ARXR2_APGA"},
-	{"HandsfreeR Mux", "DACL2", "ARXL2_APGA"},
+	{"HandsfreeR Mux", "Voice", "Analog Voice Playback Mixer"},
+	{"HandsfreeR Mux", "AudioR1", "Analog R1 Playback Mixer"},
+	{"HandsfreeR Mux", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HandsfreeR Mux", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HandsfreeR Switch", "Switch", "HandsfreeR Mux"},
+	{"HandsfreeR PGA", NULL, "HandsfreeR Switch"},
+	/* Vibra */
+	{"Vibra Mux", "AudioL1", "DAC Left1"},
+	{"Vibra Mux", "AudioR1", "DAC Right1"},
+	{"Vibra Mux", "AudioL2", "DAC Left2"},
+	{"Vibra Mux", "AudioR2", "DAC Right2"},
 
 	/* outputs */
-	{"OUTL", NULL, "ARXL2_APGA"},
-	{"OUTR", NULL, "ARXR2_APGA"},
-	{"EARPIECE", NULL, "Earpiece Mux"},
-	{"PREDRIVEL", NULL, "PredriveL Mux"},
-	{"PREDRIVER", NULL, "PredriveR Mux"},
-	{"HSOL", NULL, "HeadsetL Mux"},
-	{"HSOR", NULL, "HeadsetR Mux"},
-	{"CARKITL", NULL, "CarkitL Mux"},
-	{"CARKITR", NULL, "CarkitR Mux"},
-	{"HFL", NULL, "HandsfreeL Mux"},
-	{"HFR", NULL, "HandsfreeR Mux"},
+	{"OUTL", NULL, "Analog L2 Playback Mixer"},
+	{"OUTR", NULL, "Analog R2 Playback Mixer"},
+	{"EARPIECE", NULL, "Earpiece Mixer"},
+	{"PREDRIVEL", NULL, "PredriveL Mixer"},
+	{"PREDRIVER", NULL, "PredriveR Mixer"},
+	{"HSOL", NULL, "HeadsetL PGA"},
+	{"HSOR", NULL, "HeadsetR PGA"},
+	{"CARKITL", NULL, "CarkitL Mixer"},
+	{"CARKITR", NULL, "CarkitR Mixer"},
+	{"HFL", NULL, "HandsfreeL PGA"},
+	{"HFR", NULL, "HandsfreeR PGA"},
+	{"Vibra Route", "Audio", "Vibra Mux"},
+	{"VIBRA", NULL, "Vibra Route"},
 
 	/* Capture path */
 	{"Analog Left Capture Route", "Main mic", "MAINMIC"},
@@ -1168,18 +1427,22 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"},
 	{"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"},
 	{"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"},
+	{"Voice Analog Loopback", "Switch", "Analog Left Capture Route"},
 
 	{"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"},
 	{"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"},
 	{"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"},
 	{"Analog L2 Playback Mixer", NULL, "Left2 Analog Loopback"},
+	{"Analog Voice Playback Mixer", NULL, "Voice Analog Loopback"},
 
 	/* Digital bypass routes */
 	{"Right Digital Loopback", "Volume", "TX1 Capture Route"},
 	{"Left Digital Loopback", "Volume", "TX1 Capture Route"},
+	{"Voice Digital Loopback", "Volume", "TX2 Capture Route"},
 
-	{"Analog R2 Playback Mixer", NULL, "Right Digital Loopback"},
-	{"Analog L2 Playback Mixer", NULL, "Left Digital Loopback"},
+	{"Digital R2 Playback Mixer", NULL, "Right Digital Loopback"},
+	{"Digital L2 Playback Mixer", NULL, "Left Digital Loopback"},
+	{"Digital Voice Playback Mixer", NULL, "Voice Digital Loopback"},
 
 };
 
@@ -1226,6 +1489,58 @@ static int twl4030_set_bias_level(struct snd_soc_codec *codec,
 	return 0;
 }
 
+static void twl4030_constraints(struct twl4030_priv *twl4030,
+				struct snd_pcm_substream *mst_substream)
+{
+	struct snd_pcm_substream *slv_substream;
+
+	/* Pick the stream, which need to be constrained */
+	if (mst_substream == twl4030->master_substream)
+		slv_substream = twl4030->slave_substream;
+	else if (mst_substream == twl4030->slave_substream)
+		slv_substream = twl4030->master_substream;
+	else /* This should not happen.. */
+		return;
+
+	/* Set the constraints according to the already configured stream */
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_RATE,
+				twl4030->rate,
+				twl4030->rate);
+
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+				twl4030->sample_bits,
+				twl4030->sample_bits);
+
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_CHANNELS,
+				twl4030->channels,
+				twl4030->channels);
+}
+
+/* In case of 4 channel mode, the RX1 L/R for playback and the TX2 L/R for
+ * capture has to be enabled/disabled. */
+static void twl4030_tdm_enable(struct snd_soc_codec *codec, int direction,
+				int enable)
+{
+	u8 reg, mask;
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = TWL4030_ARXL1_VRX_EN | TWL4030_ARXR1_EN;
+	else
+		mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
+
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	twl4030_write(codec, TWL4030_REG_OPTION, reg);
+}
+
 static int twl4030_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
@@ -1234,26 +1549,25 @@ static int twl4030_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct twl4030_priv *twl4030 = codec->private_data;
 
-	/* If we already have a playback or capture going then constrain
-	 * this substream to match it.
-	 */
 	if (twl4030->master_substream) {
-		struct snd_pcm_runtime *master_runtime;
-		master_runtime = twl4030->master_substream->runtime;
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
-					     master_runtime->sample_bits,
-					     master_runtime->sample_bits);
-
 		twl4030->slave_substream = substream;
-	} else
+		/* The DAI has one configuration for playback and capture, so
+		 * if the DAI has been already configured then constrain this
+		 * substream to match it. */
+		if (twl4030->configured)
+			twl4030_constraints(twl4030, twl4030->master_substream);
+	} else {
+		if (!(twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) &
+			TWL4030_OPTION_1)) {
+			/* In option2 4 channel is not supported, set the
+			 * constraint for the first stream for channels, the
+			 * second stream will 'inherit' this cosntraint */
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						SNDRV_PCM_HW_PARAM_CHANNELS,
+						2, 2);
+		}
 		twl4030->master_substream = substream;
+	}
 
 	return 0;
 }
@@ -1270,6 +1584,17 @@ static void twl4030_shutdown(struct snd_pcm_substream *substream,
 		twl4030->master_substream = twl4030->slave_substream;
 
 	twl4030->slave_substream = NULL;
+
+	/* If all streams are closed, or the remaining stream has not yet
+	 * been configured than set the DAI as not configured. */
+	if (!twl4030->master_substream)
+		twl4030->configured = 0;
+	 else if (!twl4030->master_substream->runtime->channels)
+		twl4030->configured = 0;
+
+	 /* If the closing substream had 4 channel, do the necessary cleanup */
+	if (substream->runtime->channels == 4)
+		twl4030_tdm_enable(codec, substream->stream, 0);
 }
 
 static int twl4030_hw_params(struct snd_pcm_substream *substream,
@@ -1282,8 +1607,24 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
 	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 mode, old_mode, format, old_format;
 
-	if (substream == twl4030->slave_substream)
-		/* Ignoring hw_params for slave substream */
+	 /* If the substream has 4 channel, do the necessary setup */
+	if (params_channels(params) == 4) {
+		u8 format, mode;
+
+		format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+		mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
+
+		/* Safety check: are we in the correct operating mode and
+		 * the interface is in TDM mode? */
+		if ((mode & TWL4030_OPTION_1) &&
+		    ((format & TWL4030_AIF_FORMAT) == TWL4030_AIF_FORMAT_TDM))
+			twl4030_tdm_enable(codec, substream->stream, 1);
+		else
+			return -EINVAL;
+	}
+
+	if (twl4030->configured)
+		/* Ignoring hw_params for already configured DAI */
 		return 0;
 
 	/* bit rate */
@@ -1363,6 +1704,21 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
 		/* set CODECPDZ afterwards */
 		twl4030_codec_enable(codec, 1);
 	}
+
+	/* Store the important parameters for the DAI configuration and set
+	 * the DAI as configured */
+	twl4030->configured = 1;
+	twl4030->rate = params_rate(params);
+	twl4030->sample_bits = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_SAMPLE_BITS)->min;
+	twl4030->channels = params_channels(params);
+
+	/* If both playback and capture streams are open, and one of them
+	 * is setting the hw parameters right now (since we are here), set
+	 * constraints to the other stream to match the current one. */
+	if (twl4030->slave_substream)
+		twl4030_constraints(twl4030, substream);
+
 	return 0;
 }
 
@@ -1370,17 +1726,21 @@ static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 infreq;
 
 	switch (freq) {
 	case 19200000:
 		infreq = TWL4030_APLL_INFREQ_19200KHZ;
+		twl4030->sysclk = 19200;
 		break;
 	case 26000000:
 		infreq = TWL4030_APLL_INFREQ_26000KHZ;
+		twl4030->sysclk = 26000;
 		break;
 	case 38400000:
 		infreq = TWL4030_APLL_INFREQ_38400KHZ;
+		twl4030->sysclk = 38400;
 		break;
 	default:
 		printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
@@ -1424,6 +1784,9 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_I2S:
 		format |= TWL4030_AIF_FORMAT_CODEC;
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		format |= TWL4030_AIF_FORMAT_TDM;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1443,6 +1806,180 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	return 0;
 }
 
+/* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R
+ * (VTXL, VTXR) for uplink has to be enabled/disabled. */
+static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction,
+				int enable)
+{
+	u8 reg, mask;
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = TWL4030_ARXL1_VRX_EN;
+	else
+		mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
+
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	twl4030_write(codec, TWL4030_REG_OPTION, reg);
+}
+
+static int twl4030_voice_startup(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u8 infreq;
+	u8 mode;
+
+	/* If the system master clock is not 26MHz, the voice PCM interface is
+	 * not avilable.
+	 */
+	infreq = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL)
+		& TWL4030_APLL_INFREQ;
+
+	if (infreq != TWL4030_APLL_INFREQ_26000KHZ) {
+		printk(KERN_ERR "TWL4030 voice startup: "
+			"MCLK is not 26MHz, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	/* If the codec mode is not option2, the voice PCM interface is not
+	 * avilable.
+	 */
+	mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
+		& TWL4030_OPT_MODE;
+
+	if (mode != TWL4030_OPTION_2) {
+		printk(KERN_ERR "TWL4030 voice startup: "
+			"the codec mode is not option2\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void twl4030_voice_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	/* Enable voice digital filters */
+	twl4030_voice_enable(codec, substream->stream, 0);
+}
+
+static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u8 old_mode, mode;
+
+	/* Enable voice digital filters */
+	twl4030_voice_enable(codec, substream->stream, 1);
+
+	/* bit rate */
+	old_mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
+		& ~(TWL4030_CODECPDZ);
+	mode = old_mode;
+
+	switch (params_rate(params)) {
+	case 8000:
+		mode &= ~(TWL4030_SEL_16K);
+		break;
+	case 16000:
+		mode |= TWL4030_SEL_16K;
+		break;
+	default:
+		printk(KERN_ERR "TWL4030 voice hw params: unknown rate %d\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	if (mode != old_mode) {
+		/* change rate and set CODECPDZ */
+		twl4030_codec_enable(codec, 0);
+		twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+		twl4030_codec_enable(codec, 1);
+	}
+
+	return 0;
+}
+
+static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 infreq;
+
+	switch (freq) {
+	case 26000000:
+		infreq = TWL4030_APLL_INFREQ_26000KHZ;
+		break;
+	default:
+		printk(KERN_ERR "TWL4030 voice set sysclk: unknown rate %d\n",
+			freq);
+		return -EINVAL;
+	}
+
+	infreq |= TWL4030_APLL_EN;
+	twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
+
+	return 0;
+}
+
+static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 old_format, format;
+
+	/* get format */
+	old_format = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF);
+	format = old_format;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFM:
+		format &= ~(TWL4030_VIF_SLAVE_EN);
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		format |= TWL4030_VIF_SLAVE_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_NF:
+		format &= ~(TWL4030_VIF_FORMAT);
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		format |= TWL4030_VIF_FORMAT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (format != old_format) {
+		/* change format and set CODECPDZ */
+		twl4030_codec_enable(codec, 0);
+		twl4030_write(codec, TWL4030_REG_VOICE_IF, format);
+		twl4030_codec_enable(codec, 1);
+	}
+
+	return 0;
+}
+
 #define TWL4030_RATES	 (SNDRV_PCM_RATE_8000_48000)
 #define TWL4030_FORMATS	 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
 
@@ -1454,21 +1991,47 @@ static struct snd_soc_dai_ops twl4030_dai_ops = {
 	.set_fmt	= twl4030_set_dai_fmt,
 };
 
-struct snd_soc_dai twl4030_dai = {
+static struct snd_soc_dai_ops twl4030_dai_voice_ops = {
+	.startup	= twl4030_voice_startup,
+	.shutdown	= twl4030_voice_shutdown,
+	.hw_params	= twl4030_voice_hw_params,
+	.set_sysclk	= twl4030_voice_set_dai_sysclk,
+	.set_fmt	= twl4030_voice_set_dai_fmt,
+};
+
+struct snd_soc_dai twl4030_dai[] = {
+{
 	.name = "twl4030",
 	.playback = {
-		.stream_name = "Playback",
+		.stream_name = "HiFi Playback",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 4,
 		.rates = TWL4030_RATES | SNDRV_PCM_RATE_96000,
 		.formats = TWL4030_FORMATS,},
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 4,
 		.rates = TWL4030_RATES,
 		.formats = TWL4030_FORMATS,},
 	.ops = &twl4030_dai_ops,
+},
+{
+	.name = "twl4030 Voice",
+	.playback = {
+		.stream_name = "Voice Playback",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &twl4030_dai_voice_ops,
+},
 };
 EXPORT_SYMBOL_GPL(twl4030_dai);
 
@@ -1500,6 +2063,8 @@ static int twl4030_resume(struct platform_device *pdev)
 static int twl4030_init(struct snd_soc_device *socdev)
 {
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct twl4030_setup_data *setup = socdev->codec_data;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	int ret = 0;
 
 	printk(KERN_INFO "TWL4030 Audio Codec init \n");
@@ -1509,14 +2074,31 @@ static int twl4030_init(struct snd_soc_device *socdev)
 	codec->read = twl4030_read_reg_cache;
 	codec->write = twl4030_write;
 	codec->set_bias_level = twl4030_set_bias_level;
-	codec->dai = &twl4030_dai;
-	codec->num_dai = 1;
+	codec->dai = twl4030_dai;
+	codec->num_dai = ARRAY_SIZE(twl4030_dai),
 	codec->reg_cache_size = sizeof(twl4030_reg);
 	codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
 					GFP_KERNEL);
 	if (codec->reg_cache == NULL)
 		return -ENOMEM;
 
+	/* Configuration for headset ramp delay from setup data */
+	if (setup) {
+		unsigned char hs_pop;
+
+		if (setup->sysclk)
+			twl4030->sysclk = setup->sysclk;
+		else
+			twl4030->sysclk = 26000;
+
+		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+		hs_pop &= ~TWL4030_RAMP_DELAY;
+		hs_pop |= (setup->ramp_delay_value << 2);
+		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	} else {
+		twl4030->sysclk = 26000;
+	}
+
 	/* register pcms */
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
 	if (ret < 0) {
@@ -1604,13 +2186,13 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
 
 static int __init twl4030_modinit(void)
 {
-	return snd_soc_register_dai(&twl4030_dai);
+	return snd_soc_register_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
 }
 module_init(twl4030_modinit);
 
 static void __exit twl4030_exit(void)
 {
-	snd_soc_unregister_dai(&twl4030_dai);
+	snd_soc_unregister_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
 }
 module_exit(twl4030_exit);
 
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index cb63765db1d..fe5f395d9e4 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -92,8 +92,9 @@
 #define TWL4030_REG_VIBRA_PWM_SET	0x47
 #define TWL4030_REG_ANAMIC_GAIN		0x48
 #define TWL4030_REG_MISC_SET_2		0x49
+#define TWL4030_REG_SW_SHADOW		0x4A
 
-#define TWL4030_CACHEREGNUM	(TWL4030_REG_MISC_SET_2 + 1)
+#define TWL4030_CACHEREGNUM	(TWL4030_REG_SW_SHADOW + 1)
 
 /* Bitfield Definitions */
 
@@ -110,9 +111,22 @@
 #define TWL4030_APLL_RATE_44100		0x90
 #define TWL4030_APLL_RATE_48000		0xA0
 #define TWL4030_APLL_RATE_96000		0xE0
-#define TWL4030_SEL_16K			0x04
+#define TWL4030_SEL_16K			0x08
 #define TWL4030_CODECPDZ		0x02
 #define TWL4030_OPT_MODE		0x01
+#define TWL4030_OPTION_1		(1 << 0)
+#define TWL4030_OPTION_2		(0 << 0)
+
+/* TWL4030_OPTION (0x02) Fields */
+
+#define TWL4030_ATXL1_EN		(1 << 0)
+#define TWL4030_ATXR1_EN		(1 << 1)
+#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
+#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
+#define TWL4030_ARXL1_VRX_EN		(1 << 4)
+#define TWL4030_ARXR1_EN		(1 << 5)
+#define TWL4030_ARXL2_EN		(1 << 6)
+#define TWL4030_ARXR2_EN		(1 << 7)
 
 /* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
 
@@ -171,6 +185,17 @@
 #define TWL4030_CLK256FS_EN		0x02
 #define TWL4030_AIF_EN			0x01
 
+/* VOICE_IF (0x0F) Fields */
+
+#define TWL4030_VIF_SLAVE_EN		0x80
+#define TWL4030_VIF_DIN_EN		0x40
+#define TWL4030_VIF_DOUT_EN		0x20
+#define TWL4030_VIF_SWAP		0x10
+#define TWL4030_VIF_FORMAT		0x08
+#define TWL4030_VIF_TRI_EN		0x04
+#define TWL4030_VIF_SUB_EN		0x02
+#define TWL4030_VIF_EN			0x01
+
 /* EAR_CTL (0x21) */
 #define TWL4030_EAR_GAIN		0x30
 
@@ -236,7 +261,19 @@
 #define TWL4030_SMOOTH_ANAVOL_EN	0x02
 #define TWL4030_DIGMIC_LR_SWAP_EN	0x01
 
-extern struct snd_soc_dai twl4030_dai;
+/* TWL4030_REG_SW_SHADOW (0x4A) Fields */
+#define TWL4030_HFL_EN			0x01
+#define TWL4030_HFR_EN			0x02
+
+#define TWL4030_DAI_HIFI		0
+#define TWL4030_DAI_VOICE		1
+
+extern struct snd_soc_dai twl4030_dai[2];
 extern struct snd_soc_codec_device soc_codec_dev_twl4030;
 
+struct twl4030_setup_data {
+	unsigned int ramp_delay_value;
+	unsigned int sysclk;
+};
+
 #endif	/* End of __TWL4030_AUDIO_H__ */
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index ddefb8f8014..269b108e1de 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -101,7 +101,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg,
 	pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value);
 
 	if (reg >= UDA134X_REGS_NUM) {
-		printk(KERN_ERR "%s unkown register: reg: %d",
+		printk(KERN_ERR "%s unkown register: reg: %u",
 		       __func__, reg);
 		return -EINVAL;
 	}
@@ -296,7 +296,7 @@ static int uda134x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct uda134x_priv *uda134x = codec->private_data;
 
-	pr_debug("%s clk_id: %d, freq: %d, dir: %d\n", __func__,
+	pr_debug("%s clk_id: %d, freq: %u, dir: %d\n", __func__,
 		 clk_id, freq, dir);
 
 	/* Anything between 256fs*8Khz and 512fs*48Khz should be acceptable
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 0275321ff8a..e7348d341b7 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1108,7 +1108,7 @@ static int wm8350_set_fll(struct snd_soc_dai *codec_dai,
 	if (ret < 0)
 		return ret;
 	dev_dbg(wm8350->dev,
-		"FLL in %d FLL out %d N 0x%x K 0x%x div %d ratio %d",
+		"FLL in %u FLL out %u N 0x%x K 0x%x div %d ratio %d",
 		freq_in, freq_out, fll_div.n, fll_div.k, fll_div.div,
 		fll_div.ratio);
 
diff --git a/sound/soc/codecs/wm8350.h b/sound/soc/codecs/wm8350.h
index d11bd9288cf..d088eb4b88b 100644
--- a/sound/soc/codecs/wm8350.h
+++ b/sound/soc/codecs/wm8350.h
@@ -13,6 +13,7 @@
 #define _WM8350_H
 
 #include <sound/soc.h>
+#include <linux/mfd/wm8350/audio.h>
 
 extern struct snd_soc_dai wm8350_dai;
 extern struct snd_soc_codec_device soc_codec_dev_wm8350;
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index 510efa60400..502eefac1ec 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -954,7 +954,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors,
 		factors->outdiv *= 2;
 		if (factors->outdiv > 32) {
 			dev_err(wm8400->wm8400->dev,
-				"Unsupported FLL output frequency %dHz\n",
+				"Unsupported FLL output frequency %uHz\n",
 				Fout);
 			return -EINVAL;
 		}
@@ -1003,7 +1003,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors,
 	factors->k = K / 10;
 
 	dev_dbg(wm8400->wm8400->dev,
-		"FLL: Fref=%d Fout=%d N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
+		"FLL: Fref=%u Fout=%u N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
 		Fref, Fout,
 		factors->n, factors->k, factors->fratio, factors->outdiv);
 
@@ -1473,8 +1473,8 @@ static int wm8400_codec_probe(struct platform_device *dev)
 
 	codec = &priv->codec;
 	codec->private_data = priv;
-	codec->control_data = dev->dev.driver_data;
-	priv->wm8400 = dev->dev.driver_data;
+	codec->control_data = dev_get_drvdata(&dev->dev);
+	priv->wm8400 = dev_get_drvdata(&dev->dev);
 
 	ret = regulator_bulk_get(priv->wm8400->dev,
 				 ARRAY_SIZE(power), &power[0]);
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 6a4cea09c45..c8b8dba8589 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -298,7 +298,7 @@ static void pll_factors(unsigned int target, unsigned int source)
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"WM8510 N value %d outwith recommended range!d\n",
+			"WM8510 N value %u outwith recommended range!d\n",
 			Ndiv);
 
 	pll_div.n = Ndiv;
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 9f6be3d31ac..86c4b24db81 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -415,7 +415,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target,
 	unsigned int K, Ndiv, Nmod;
 	int i;
 
-	pr_debug("wm8580: PLL %dHz->%dHz\n", source, target);
+	pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
 
 	/* Scale the output frequency up; the PLL should run in the
 	 * region of 90-100MHz.
@@ -447,7 +447,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target,
 
 	if ((Ndiv < 5) || (Ndiv > 13)) {
 		printk(KERN_ERR
-			"WM8580 N=%d outside supported range\n", Ndiv);
+			"WM8580 N=%u outside supported range\n", Ndiv);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index e043e3f6000..7a205876ef4 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -666,14 +666,14 @@ static int __devinit wm8731_spi_probe(struct spi_device *spi)
 	codec->hw_write = (hw_write_t)wm8731_spi_write;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8731;
+	dev_set_drvdata(&spi->dev, wm8731);
 
 	return wm8731_register(wm8731);
 }
 
 static int __devexit wm8731_spi_remove(struct spi_device *spi)
 {
-	struct wm8731_priv *wm8731 = spi->dev.driver_data;
+	struct wm8731_priv *wm8731 = dev_get_drvdata(&spi->dev);
 
 	wm8731_unregister(wm8731);
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index a6e8f3f7f05..d28eeaceb85 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -703,7 +703,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target,
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"wm8753: unsupported N = %d\n", Ndiv);
+			"wm8753: unsupported N = %u\n", Ndiv);
 
 	pll_div->n = Ndiv;
 	Nmod = target % source;
@@ -1822,14 +1822,14 @@ static int __devinit wm8753_spi_probe(struct spi_device *spi)
 	codec->hw_write = (hw_write_t)wm8753_spi_write;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8753;
+	dev_set_drvdata(&spi->dev, wm8753);
 
 	return wm8753_register(wm8753);
 }
 
 static int __devexit wm8753_spi_remove(struct spi_device *spi)
 {
-	struct wm8753_priv *wm8753 = spi->dev.driver_data;
+	struct wm8753_priv *wm8753 = dev_get_drvdata(&spi->dev);
 	wm8753_unregister(wm8753);
 	return 0;
 }
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 46c5ea1ff92..3c78945244b 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -778,11 +778,11 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 	}
 
 	if (target > 100000000)
-		printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d"
-		       " Fout=%d\n", target, Fref, Fout);
+		printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u"
+		       " Fout=%u\n", target, Fref, Fout);
 	if (div > 32) {
 		printk(KERN_ERR "wm8900: Invalid FLL division rate %u, "
-		       "Fref=%d, Fout=%d, target=%d\n",
+		       "Fref=%u, Fout=%u, target=%u\n",
 		       div, Fref, Fout, target);
 		return -EINVAL;
 	}
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 8cf571f1a80..e8d2e3e14c4 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -217,7 +217,6 @@ struct wm8903_priv {
 	int sysclk;
 
 	/* Reference counts */
-	int charge_pump_users;
 	int class_w_users;
 	int playback_active;
 	int capture_active;
@@ -373,6 +372,15 @@ static void wm8903_reset(struct snd_soc_codec *codec)
 #define WM8903_OUTPUT_INT   0x2
 #define WM8903_OUTPUT_IN    0x1
 
+static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
+			   struct snd_kcontrol *kcontrol, int event)
+{
+	WARN_ON(event != SND_SOC_DAPM_POST_PMU);
+	mdelay(4);
+
+	return 0;
+}
+
 /*
  * Event for headphone and line out amplifier power changes.  Special
  * power up/down sequences are required in order to maximise pop/click
@@ -382,19 +390,20 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 			       struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
-	struct wm8903_priv *wm8903 = codec->private_data;
-	struct i2c_client *i2c = codec->control_data;
 	u16 val;
 	u16 reg;
+	u16 dcs_reg;
+	u16 dcs_bit;
 	int shift;
-	u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0);
 
 	switch (w->reg) {
 	case WM8903_POWER_MANAGEMENT_2:
 		reg = WM8903_ANALOGUE_HP_0;
+		dcs_bit = 0 + w->shift;
 		break;
 	case WM8903_POWER_MANAGEMENT_3:
 		reg = WM8903_ANALOGUE_LINEOUT_0;
+		dcs_bit = 2 + w->shift;
 		break;
 	default:
 		BUG();
@@ -419,18 +428,6 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 		/* Short the output */
 		val &= ~(WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
-
-		wm8903->charge_pump_users++;
-
-		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
-			wm8903->charge_pump_users);
-
-		if (wm8903->charge_pump_users == 1) {
-			dev_dbg(&i2c->dev, "Enabling charge pump\n");
-			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
-				     cp_reg | WM8903_CP_ENA);
-			mdelay(4);
-		}
 	}
 
 	if (event & SND_SOC_DAPM_POST_PMU) {
@@ -446,6 +443,11 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 		val |= (WM8903_OUTPUT_OUT << shift);
 		wm8903_write(codec, reg, val);
 
+		/* Enable the DC servo */
+		dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+		dcs_reg |= dcs_bit;
+		wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+
 		/* Remove the short */
 		val |= (WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
@@ -458,25 +460,17 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 		val &= ~(WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
 
+		/* Disable the DC servo */
+		dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+		dcs_reg &= ~dcs_bit;
+		wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+
 		/* Then disable the intermediate and output stages */
 		val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
 			  WM8903_OUTPUT_IN) << shift);
 		wm8903_write(codec, reg, val);
 	}
 
-	if (event & SND_SOC_DAPM_POST_PMD) {
-		wm8903->charge_pump_users--;
-
-		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
-			wm8903->charge_pump_users);
-
-		if (wm8903->charge_pump_users == 0) {
-			dev_dbg(&i2c->dev, "Disabling charge pump\n");
-			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
-				     cp_reg & ~WM8903_CP_ENA);
-		}
-	}
-
 	return 0;
 }
 
@@ -539,6 +533,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
 /* ALSA can only do steps of .01dB */
 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 
+static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 
 static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
@@ -657,6 +652,16 @@ static const struct soc_enum rinput_inv_enum =
 	SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text);
 
 
+static const char *sidetone_text[] = {
+	"None", "Left", "Right"
+};
+
+static const struct soc_enum lsidetone_enum =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text);
+
+static const struct soc_enum rsidetone_enum =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text);
+
 static const struct snd_kcontrol_new wm8903_snd_controls[] = {
 
 /* Input PGAs - No TLV since the scale depends on PGA mode */
@@ -700,6 +705,9 @@ SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
 SOC_ENUM("ADC Companding Mode", adc_companding),
 SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
 
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
+	       12, 0, digital_sidetone_tlv),
+
 /* DAC */
 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
 		 WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
@@ -762,6 +770,12 @@ static const struct snd_kcontrol_new rinput_mux =
 static const struct snd_kcontrol_new rinput_inv_mux =
 	SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
 
+static const struct snd_kcontrol_new lsidetone_mux =
+	SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
+
+static const struct snd_kcontrol_new rsidetone_mux =
+	SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
+
 static const struct snd_kcontrol_new left_output_mixer[] = {
 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
@@ -828,6 +842,9 @@ SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
 SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0),
 SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0),
 
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
+
 SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0),
 SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0),
 
@@ -844,26 +861,29 @@ SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
 SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
 		   1, 0, NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
 		   0, 0, NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
 		   NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
 		   NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
 		 NULL, 0),
 SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
 		 NULL, 0),
 
+SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
+		    wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_route intercon[] = {
@@ -909,7 +929,19 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{ "Right Input PGA", NULL, "Right Input Mode Mux" },
 
 	{ "ADCL", NULL, "Left Input PGA" },
+	{ "ADCL", NULL, "CLK_DSP" },
 	{ "ADCR", NULL, "Right Input PGA" },
+	{ "ADCR", NULL, "CLK_DSP" },
+
+	{ "DACL Sidetone", "Left", "ADCL" },
+	{ "DACL Sidetone", "Right", "ADCR" },
+	{ "DACR Sidetone", "Left", "ADCL" },
+	{ "DACR Sidetone", "Right", "ADCR" },
+
+	{ "DACL", NULL, "DACL Sidetone" },
+	{ "DACL", NULL, "CLK_DSP" },
+	{ "DACR", NULL, "DACR Sidetone" },
+	{ "DACR", NULL, "CLK_DSP" },
 
 	{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
 	{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
@@ -951,6 +983,11 @@ static const struct snd_soc_dapm_route intercon[] = {
 
 	{ "ROP", NULL, "Right Speaker PGA" },
 	{ "RON", NULL, "Right Speaker PGA" },
+
+	{ "Left Headphone Output PGA", NULL, "Charge Pump" },
+	{ "Right Headphone Output PGA", NULL, "Charge Pump" },
+	{ "Left Line Output PGA", NULL, "Charge Pump" },
+	{ "Right Line Output PGA", NULL, "Charge Pump" },
 };
 
 static int wm8903_add_widgets(struct snd_soc_codec *codec)
@@ -985,6 +1022,11 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 			wm8903_write(codec, WM8903_CLOCK_RATES_2,
 				     WM8903_CLK_SYS_ENA);
 
+			/* Change DC servo dither level in startup sequence */
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
+
 			wm8903_run_sequence(codec, 0);
 			wm8903_sync_reg_cache(codec, codec->reg_cache);
 
@@ -1215,22 +1257,18 @@ static struct {
 	int div;
 } bclk_divs[] = {
 	{  10,  0 },
-	{  15,  1 },
 	{  20,  2 },
 	{  30,  3 },
 	{  40,  4 },
 	{  50,  5 },
-	{  55,  6 },
 	{  60,  7 },
 	{  80,  8 },
 	{ 100,  9 },
-	{ 110, 10 },
 	{ 120, 11 },
 	{ 160, 12 },
 	{ 200, 13 },
 	{ 220, 14 },
 	{ 240, 15 },
-	{ 250, 16 },
 	{ 300, 17 },
 	{ 320, 18 },
 	{ 440, 19 },
@@ -1277,14 +1315,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
 	if (wm8903->master_substream) {
 		master_runtime = wm8903->master_substream->runtime;
 
-		dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
-			master_runtime->sample_bits,
-			master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
+		dev_dbg(&i2c->dev, "Constraining to %d bits\n",
+			master_runtime->sample_bits);
 
 		snd_pcm_hw_constraint_minmax(substream->runtime,
 					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
@@ -1523,6 +1555,7 @@ struct snd_soc_dai wm8903_dai = {
 		 .formats = WM8903_FORMATS,
 	 },
 	.ops = &wm8903_dai_ops,
+	.symmetric_rates = 1,
 };
 EXPORT_SYMBOL_GPL(wm8903_dai);
 
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
new file mode 100644
index 00000000000..b8e17d6bc1f
--- /dev/null
+++ b/sound/soc/codecs/wm8940.c
@@ -0,0 +1,955 @@
+/*
+ * wm8940.c  --  WM8940 ALSA Soc Audio driver
+ *
+ * Author: Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * Based on wm8510.c
+ *    Copyright  2006 Wolfson Microelectronics PLC.
+ *    Author:  Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Not currently handled:
+ * Notch filter control
+ * AUXMode (inverting vs mixer)
+ * No means to obtain current gain if alc enabled.
+ * No use made of gpio
+ * Fast VMID discharge for power down
+ * Soft Start
+ * DLR and ALR Swaps not enabled
+ * Digital Sidetone not supported
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8940.h"
+
+struct wm8940_priv {
+	unsigned int sysclk;
+	u16 reg_cache[WM8940_CACHEREGNUM];
+	struct snd_soc_codec codec;
+};
+
+static u16 wm8940_reg_defaults[] = {
+	0x8940, /* Soft Reset */
+	0x0000, /* Power 1 */
+	0x0000, /* Power 2 */
+	0x0000, /* Power 3 */
+	0x0010, /* Interface Control */
+	0x0000, /* Companding Control */
+	0x0140, /* Clock Control */
+	0x0000, /* Additional Controls */
+	0x0000, /* GPIO Control */
+	0x0002, /* Auto Increment Control */
+	0x0000, /* DAC Control */
+	0x00FF, /* DAC Volume */
+	0,
+	0,
+	0x0100, /* ADC Control */
+	0x00FF, /* ADC Volume */
+	0x0000, /* Notch Filter 1 Control 1 */
+	0x0000, /* Notch Filter 1 Control 2 */
+	0x0000, /* Notch Filter 2 Control 1 */
+	0x0000, /* Notch Filter 2 Control 2 */
+	0x0000, /* Notch Filter 3 Control 1 */
+	0x0000, /* Notch Filter 3 Control 2 */
+	0x0000, /* Notch Filter 4 Control 1 */
+	0x0000, /* Notch Filter 4 Control 2 */
+	0x0032, /* DAC Limit Control 1 */
+	0x0000, /* DAC Limit Control 2 */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0x0038, /* ALC Control 1 */
+	0x000B, /* ALC Control 2 */
+	0x0032, /* ALC Control 3 */
+	0x0000, /* Noise Gate */
+	0x0041, /* PLLN */
+	0x000C, /* PLLK1 */
+	0x0093, /* PLLK2 */
+	0x00E9, /* PLLK3 */
+	0,
+	0,
+	0x0030, /* ALC Control 4 */
+	0,
+	0x0002, /* Input Control */
+	0x0050, /* PGA Gain */
+	0,
+	0x0002, /* ADC Boost Control */
+	0,
+	0x0002, /* Output Control */
+	0x0000, /* Speaker Mixer Control */
+	0,
+	0,
+	0,
+	0x0079, /* Speaker Volume */
+	0,
+	0x0000, /* Mono Mixer Control */
+};
+
+static inline unsigned int wm8940_read_reg_cache(struct snd_soc_codec *codec,
+						 unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
+		return -1;
+
+	return cache[reg];
+}
+
+static inline int wm8940_write_reg_cache(struct snd_soc_codec *codec,
+					  u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
+		return -1;
+
+	cache[reg] = value;
+
+	return 0;
+}
+
+static int wm8940_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	int ret;
+	u8 data[3] = { reg,
+		       (value & 0xff00) >> 8,
+		       (value & 0x00ff)
+	};
+
+	wm8940_write_reg_cache(codec, reg, value);
+
+	ret = codec->hw_write(codec->control_data, data, 3);
+
+	if (ret < 0)
+		return ret;
+	else if (ret != 3)
+		return -EIO;
+	return 0;
+}
+
+static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" };
+static const struct soc_enum wm8940_adc_companding_enum
+= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding);
+static const struct soc_enum wm8940_dac_companding_enum
+= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 3, 4, wm8940_companding);
+
+static const char *wm8940_alc_mode_text[] = {"ALC", "Limiter"};
+static const struct soc_enum wm8940_alc_mode_enum
+= SOC_ENUM_SINGLE(WM8940_ALC3, 8, 2, wm8940_alc_mode_text);
+
+static const char *wm8940_mic_bias_level_text[] = {"0.9", "0.65"};
+static const struct soc_enum wm8940_mic_bias_level_enum
+= SOC_ENUM_SINGLE(WM8940_INPUTCTL, 8, 2, wm8940_mic_bias_level_text);
+
+static const char *wm8940_filter_mode_text[] = {"Audio", "Application"};
+static const struct soc_enum wm8940_filter_mode_enum
+= SOC_ENUM_SINGLE(WM8940_ADC, 7, 2, wm8940_filter_mode_text);
+
+static DECLARE_TLV_DB_SCALE(wm8940_spk_vol_tlv, -5700, 100, 1);
+static DECLARE_TLV_DB_SCALE(wm8940_att_tlv, -1000, 1000, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_pga_vol_tlv, -1200, 75, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_min_tlv, -1200, 600, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_max_tlv, 675, 600, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_tar_tlv, -2250, 50, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_lim_boost_tlv, 0, 100, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_lim_thresh_tlv, -600, 100, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_adc_tlv, -12750, 50, 1);
+static DECLARE_TLV_DB_SCALE(wm8940_capture_boost_vol_tlv, 0, 2000, 0);
+
+static const struct snd_kcontrol_new wm8940_snd_controls[] = {
+	SOC_SINGLE("Digital Loopback Switch", WM8940_COMPANDINGCTL,
+		   6, 1, 0),
+	SOC_ENUM("DAC Companding", wm8940_dac_companding_enum),
+	SOC_ENUM("ADC Companding", wm8940_adc_companding_enum),
+
+	SOC_ENUM("ALC Mode", wm8940_alc_mode_enum),
+	SOC_SINGLE("ALC Switch", WM8940_ALC1, 8, 1, 0),
+	SOC_SINGLE_TLV("ALC Capture Max Gain", WM8940_ALC1,
+		       3, 7, 1, wm8940_alc_max_tlv),
+	SOC_SINGLE_TLV("ALC Capture Min Gain", WM8940_ALC1,
+		       0, 7, 0, wm8940_alc_min_tlv),
+	SOC_SINGLE_TLV("ALC Capture Target", WM8940_ALC2,
+		       0, 14, 0, wm8940_alc_tar_tlv),
+	SOC_SINGLE("ALC Capture Hold", WM8940_ALC2, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Decay", WM8940_ALC3, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Attach", WM8940_ALC3, 0, 10, 0),
+	SOC_SINGLE("ALC ZC Switch", WM8940_ALC4, 1, 1, 0),
+	SOC_SINGLE("ALC Capture Noise Gate Switch", WM8940_NOISEGATE,
+		   3, 1, 0),
+	SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8940_NOISEGATE,
+		   0, 7, 0),
+
+	SOC_SINGLE("DAC Playback Limiter Switch", WM8940_DACLIM1, 8, 1, 0),
+	SOC_SINGLE("DAC Playback Limiter Attack", WM8940_DACLIM1, 0, 9, 0),
+	SOC_SINGLE("DAC Playback Limiter Decay", WM8940_DACLIM1, 4, 11, 0),
+	SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8940_DACLIM2,
+		       4, 9, 1, wm8940_lim_thresh_tlv),
+	SOC_SINGLE_TLV("DAC Playback Limiter Boost", WM8940_DACLIM2,
+		       0, 12, 0, wm8940_lim_boost_tlv),
+
+	SOC_SINGLE("Capture PGA ZC Switch", WM8940_PGAGAIN, 7, 1, 0),
+	SOC_SINGLE_TLV("Capture PGA Volume", WM8940_PGAGAIN,
+		       0, 63, 0, wm8940_pga_vol_tlv),
+	SOC_SINGLE_TLV("Digital Playback Volume", WM8940_DACVOL,
+		       0, 255, 0, wm8940_adc_tlv),
+	SOC_SINGLE_TLV("Digital Capture Volume", WM8940_ADCVOL,
+		       0, 255, 0, wm8940_adc_tlv),
+	SOC_ENUM("Mic Bias Level", wm8940_mic_bias_level_enum),
+	SOC_SINGLE_TLV("Capture Boost Volue", WM8940_ADCBOOST,
+		       8, 1, 0, wm8940_capture_boost_vol_tlv),
+	SOC_SINGLE_TLV("Speaker Playback Volume", WM8940_SPKVOL,
+		       0, 63, 0, wm8940_spk_vol_tlv),
+	SOC_SINGLE("Speaker Playback Switch", WM8940_SPKVOL,  6, 1, 1),
+
+	SOC_SINGLE_TLV("Speaker Mixer Line Bypass Volume", WM8940_SPKVOL,
+		       8, 1, 1, wm8940_att_tlv),
+	SOC_SINGLE("Speaker Playback ZC Switch", WM8940_SPKVOL, 7, 1, 0),
+
+	SOC_SINGLE("Mono Out Switch", WM8940_MONOMIX, 6, 1, 1),
+	SOC_SINGLE_TLV("Mono Mixer Line Bypass Volume", WM8940_MONOMIX,
+		       7, 1, 1, wm8940_att_tlv),
+
+	SOC_SINGLE("High Pass Filter Switch", WM8940_ADC, 8, 1, 0),
+	SOC_ENUM("High Pass Filter Mode", wm8940_filter_mode_enum),
+	SOC_SINGLE("High Pass Filter Cut Off", WM8940_ADC, 4, 7, 0),
+	SOC_SINGLE("ADC Inversion Switch", WM8940_ADC, 0, 1, 0),
+	SOC_SINGLE("DAC Inversion Switch", WM8940_DAC, 0, 1, 0),
+	SOC_SINGLE("DAC Auto Mute Switch", WM8940_DAC, 2, 1, 0),
+	SOC_SINGLE("ZC Timeout Clock Switch", WM8940_ADDCNTRL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8940_speaker_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_SPKMIX, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_SPKMIX, 5, 1, 0),
+	SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_SPKMIX, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8940_mono_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_MONOMIX, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_MONOMIX, 2, 1, 0),
+	SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_MONOMIX, 0, 1, 0),
+};
+
+static DECLARE_TLV_DB_SCALE(wm8940_boost_vol_tlv, -1500, 300, 1);
+static const struct snd_kcontrol_new wm8940_input_boost_controls[] = {
+	SOC_DAPM_SINGLE("Mic PGA Switch", WM8940_PGAGAIN, 6, 1, 1),
+	SOC_DAPM_SINGLE_TLV("Aux Volume", WM8940_ADCBOOST,
+			    0, 7, 0, wm8940_boost_vol_tlv),
+	SOC_DAPM_SINGLE_TLV("Mic Volume", WM8940_ADCBOOST,
+			    4, 7, 0, wm8940_boost_vol_tlv),
+};
+
+static const struct snd_kcontrol_new wm8940_micpga_controls[] = {
+	SOC_DAPM_SINGLE("AUX Switch", WM8940_INPUTCTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("MICP Switch", WM8940_INPUTCTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("MICN Switch", WM8940_INPUTCTL, 1, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8940_dapm_widgets[] = {
+	SND_SOC_DAPM_MIXER("Speaker Mixer", WM8940_POWER3, 2, 0,
+			   &wm8940_speaker_mixer_controls[0],
+			   ARRAY_SIZE(wm8940_speaker_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Mono Mixer", WM8940_POWER3, 3, 0,
+			   &wm8940_mono_mixer_controls[0],
+			   ARRAY_SIZE(wm8940_mono_mixer_controls)),
+	SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8940_POWER3, 0, 0),
+
+	SND_SOC_DAPM_PGA("SpkN Out", WM8940_POWER3, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("SpkP Out", WM8940_POWER3, 6, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Mono Out", WM8940_POWER3, 7, 0, NULL, 0),
+	SND_SOC_DAPM_OUTPUT("MONOOUT"),
+	SND_SOC_DAPM_OUTPUT("SPKOUTP"),
+	SND_SOC_DAPM_OUTPUT("SPKOUTN"),
+
+	SND_SOC_DAPM_PGA("Aux Input", WM8940_POWER1, 6, 0, NULL, 0),
+	SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8940_POWER2, 0, 0),
+	SND_SOC_DAPM_MIXER("Mic PGA", WM8940_POWER2, 2, 0,
+			   &wm8940_micpga_controls[0],
+			   ARRAY_SIZE(wm8940_micpga_controls)),
+	SND_SOC_DAPM_MIXER("Boost Mixer", WM8940_POWER2, 4, 0,
+			   &wm8940_input_boost_controls[0],
+			   ARRAY_SIZE(wm8940_input_boost_controls)),
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8940_POWER1, 4, 0),
+
+	SND_SOC_DAPM_INPUT("MICN"),
+	SND_SOC_DAPM_INPUT("MICP"),
+	SND_SOC_DAPM_INPUT("AUX"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Mono output mixer */
+	{"Mono Mixer", "PCM Playback Switch", "DAC"},
+	{"Mono Mixer", "Aux Playback Switch", "Aux Input"},
+	{"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+	/* Speaker output mixer */
+	{"Speaker Mixer", "PCM Playback Switch", "DAC"},
+	{"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
+	{"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+	/* Outputs */
+	{"Mono Out", NULL, "Mono Mixer"},
+	{"MONOOUT", NULL, "Mono Out"},
+	{"SpkN Out", NULL, "Speaker Mixer"},
+	{"SpkP Out", NULL, "Speaker Mixer"},
+	{"SPKOUTN", NULL, "SpkN Out"},
+	{"SPKOUTP", NULL, "SpkP Out"},
+
+	/*  Microphone PGA */
+	{"Mic PGA", "MICN Switch", "MICN"},
+	{"Mic PGA", "MICP Switch", "MICP"},
+	{"Mic PGA", "AUX Switch", "AUX"},
+
+	/* Boost Mixer */
+	{"Boost Mixer", "Mic PGA Switch", "Mic PGA"},
+	{"Boost Mixer", "Mic Volume",  "MICP"},
+	{"Boost Mixer", "Aux Volume", "Aux Input"},
+
+	{"ADC", NULL, "Boost Mixer"},
+};
+
+static int wm8940_add_widgets(struct snd_soc_codec *codec)
+{
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(codec, wm8940_dapm_widgets,
+					ARRAY_SIZE(wm8940_dapm_widgets));
+	if (ret)
+		goto error_ret;
+	ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	if (ret)
+		goto error_ret;
+	ret = snd_soc_dapm_new_widgets(codec);
+
+error_ret:
+	return ret;
+}
+
+#define wm8940_reset(c) wm8940_write(c, WM8940_SOFTRESET, 0);
+
+static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFE67;
+	u16 clk = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0x1fe;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		clk |= 1;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+	wm8940_write(codec, WM8940_CLOCK, clk);
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= (2 << 3);
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= (1 << 3);
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= (3 << 3);
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= (3 << 3) | (1 << 7);
+		break;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= (1 << 7);
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= (1 << 8);
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= (1 << 8) | (1 << 7);
+		break;
+	}
+
+	wm8940_write(codec, WM8940_IFACE, iface);
+
+	return 0;
+}
+
+static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFD9F;
+	u16 addcntrl = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFF1;
+	u16 companding =  wm8940_read_reg_cache(codec,
+						WM8940_COMPANDINGCTL) & 0xFFDF;
+	int ret;
+
+	/* LoutR control */
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
+	    && params_channels(params) == 2)
+		iface |= (1 << 9);
+
+	switch (params_rate(params)) {
+	case SNDRV_PCM_RATE_8000:
+		addcntrl |= (0x5 << 1);
+		break;
+	case SNDRV_PCM_RATE_11025:
+		addcntrl |= (0x4 << 1);
+		break;
+	case SNDRV_PCM_RATE_16000:
+		addcntrl |= (0x3 << 1);
+		break;
+	case SNDRV_PCM_RATE_22050:
+		addcntrl |= (0x2 << 1);
+		break;
+	case SNDRV_PCM_RATE_32000:
+		addcntrl |= (0x1 << 1);
+		break;
+	case SNDRV_PCM_RATE_44100:
+	case SNDRV_PCM_RATE_48000:
+		break;
+	}
+	ret = wm8940_write(codec, WM8940_ADDCNTRL, addcntrl);
+	if (ret)
+		goto error_ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		companding = companding | (1 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= (1 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= (2 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= (3 << 5);
+		break;
+	}
+	ret = wm8940_write(codec, WM8940_COMPANDINGCTL, companding);
+	if (ret)
+		goto error_ret;
+	ret = wm8940_write(codec, WM8940_IFACE, iface);
+
+error_ret:
+	return ret;
+}
+
+static int wm8940_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8940_read_reg_cache(codec, WM8940_DAC) & 0xffbf;
+
+	if (mute)
+		mute_reg |= 0x40;
+
+	return wm8940_write(codec, WM8940_DAC, mute_reg);
+}
+
+static int wm8940_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 val;
+	u16 pwr_reg = wm8940_read_reg_cache(codec, WM8940_POWER1) & 0x1F0;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		/* Enable thermal shutdown */
+		val = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
+		ret = wm8940_write(codec, WM8940_OUTPUTCTL, val | 0x2);
+		if (ret)
+			break;
+		/* set vmid to 75k */
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		/* set vmid to 300k for standby */
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x2);
+		break;
+	case SND_SOC_BIAS_OFF:
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg);
+		break;
+	}
+
+	return ret;
+}
+
+struct pll_ {
+	unsigned int pre_scale:2;
+	unsigned int n:4;
+	unsigned int k;
+};
+
+static struct pll_ pll_div;
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+static void pll_factors(unsigned int target, unsigned int source)
+{
+	unsigned long long Kpart;
+	unsigned int K, Ndiv, Nmod;
+	/* The left shift ist to avoid accuracy loss when right shifting */
+	Ndiv = target / source;
+
+	if (Ndiv > 12) {
+		source <<= 1;
+		/* Multiply by 2 */
+		pll_div.pre_scale = 0;
+		Ndiv = target / source;
+	} else if (Ndiv < 3) {
+		source >>= 2;
+		/* Divide by 4 */
+		pll_div.pre_scale = 3;
+		Ndiv = target / source;
+	} else if (Ndiv < 6) {
+		source >>= 1;
+		/* divide by 2 */
+		pll_div.pre_scale = 2;
+		Ndiv = target / source;
+	} else
+		pll_div.pre_scale = 1;
+
+	if ((Ndiv < 6) || (Ndiv > 12))
+		printk(KERN_WARNING
+			"WM8940 N value %d outwith recommended range!d\n",
+			Ndiv);
+
+	pll_div.n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	/* Check if we need to round */
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	K /= 10;
+
+	pll_div.k = K;
+}
+
+/* Untested at the moment */
+static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	/* Turn off PLL */
+	reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
+	wm8940_write(codec, WM8940_POWER1, reg & 0x1df);
+
+	if (freq_in == 0 || freq_out == 0) {
+		/* Clock CODEC directly from MCLK */
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
+		wm8940_write(codec, WM8940_CLOCK, reg & 0x0ff);
+		/* Pll power down */
+		wm8940_write(codec, WM8940_PLLN, (1 << 7));
+		return 0;
+	}
+
+	/* Pll is followed by a frequency divide by 4 */
+	pll_factors(freq_out*4, freq_in);
+	if (pll_div.k)
+		wm8940_write(codec, WM8940_PLLN,
+			     (pll_div.pre_scale << 4) | pll_div.n | (1 << 6));
+	else /* No factional component */
+		wm8940_write(codec, WM8940_PLLN,
+			     (pll_div.pre_scale << 4) | pll_div.n);
+	wm8940_write(codec, WM8940_PLLK1, pll_div.k >> 18);
+	wm8940_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
+	wm8940_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
+	/* Enable the PLL */
+	reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
+	wm8940_write(codec, WM8940_POWER1, reg | 0x020);
+
+	/* Run CODEC from PLL instead of MCLK */
+	reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
+	wm8940_write(codec, WM8940_CLOCK, reg | 0x100);
+
+	return 0;
+}
+
+static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				 int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8940_priv *wm8940 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 12000000:
+	case 12288000:
+	case 16934400:
+	case 18432000:
+		wm8940->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+				 int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+	int ret = 0;
+
+	switch (div_id) {
+	case WM8940_BCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFFEF3;
+		ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 2));
+		break;
+	case WM8940_MCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFF1F;
+		ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 5));
+		break;
+	case WM8940_OPCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFCF;
+		ret = wm8940_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
+		break;
+	}
+	return ret;
+}
+
+#define WM8940_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 |				\
+			SNDRV_PCM_FMTBIT_S16_LE |			\
+			SNDRV_PCM_FMTBIT_S20_3LE |			\
+			SNDRV_PCM_FMTBIT_S24_LE |			\
+			SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8940_dai_ops = {
+	.hw_params = wm8940_i2s_hw_params,
+	.set_sysclk = wm8940_set_dai_sysclk,
+	.digital_mute = wm8940_mute,
+	.set_fmt = wm8940_set_dai_fmt,
+	.set_clkdiv = wm8940_set_dai_clkdiv,
+	.set_pll = wm8940_set_dai_pll,
+};
+
+struct snd_soc_dai wm8940_dai = {
+	.name = "WM8940",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8940_RATES,
+		.formats = WM8940_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8940_RATES,
+		.formats = WM8940_FORMATS,
+	},
+	.ops = &wm8940_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8940_dai);
+
+static int wm8940_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	return wm8940_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int wm8940_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	int ret;
+	u8 data[3];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware
+	 * Could use auto incremented writes to speed this up
+	 */
+	for (i = 0; i < ARRAY_SIZE(wm8940_reg_defaults); i++) {
+		data[0] = i;
+		data[1] = (cache[i] & 0xFF00) >> 8;
+		data[2] = cache[i] & 0x00FF;
+		ret = codec->hw_write(codec->control_data, data, 3);
+		if (ret < 0)
+			goto error_ret;
+		else if (ret != 3) {
+			ret = -EIO;
+			goto error_ret;
+		}
+	}
+	ret = wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	if (ret)
+		goto error_ret;
+	ret = wm8940_set_bias_level(codec, codec->suspend_bias_level);
+
+error_ret:
+	return ret;
+}
+
+static struct snd_soc_codec *wm8940_codec;
+
+static int wm8940_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+
+	int ret = 0;
+
+	if (wm8940_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8940_codec;
+	codec = wm8940_codec;
+
+	mutex_init(&codec->mutex);
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	ret = snd_soc_add_controls(codec, wm8940_snd_controls,
+			     ARRAY_SIZE(wm8940_snd_controls));
+	if (ret)
+		goto error_free_pcms;
+	ret = wm8940_add_widgets(codec);
+	if (ret)
+		goto error_free_pcms;
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto error_free_pcms;
+	}
+
+	return ret;
+
+error_free_pcms:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm8940_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8940 = {
+	.probe = wm8940_probe,
+	.remove = wm8940_remove,
+	.suspend = wm8940_suspend,
+	.resume = wm8940_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940);
+
+static int wm8940_register(struct wm8940_priv *wm8940)
+{
+	struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data;
+	struct snd_soc_codec *codec = &wm8940->codec;
+	int ret;
+	u16 reg;
+	if (wm8940_codec) {
+		dev_err(codec->dev, "Another WM8940 is registered\n");
+		return -EINVAL;
+	}
+
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8940;
+	codec->name = "WM8940";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8940_read_reg_cache;
+	codec->write = wm8940_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8940_set_bias_level;
+	codec->dai = &wm8940_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults);
+	codec->reg_cache = &wm8940->reg_cache;
+
+	memcpy(codec->reg_cache, wm8940_reg_defaults,
+	       sizeof(wm8940_reg_defaults));
+
+	ret = wm8940_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm8940_dai.dev = codec->dev;
+
+	wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	ret = wm8940_write(codec, WM8940_POWER1, 0x180);
+	if (ret < 0)
+		return ret;
+
+	if (!pdata)
+		dev_warn(codec->dev, "No platform data supplied\n");
+	else {
+		reg = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
+		ret = wm8940_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
+		if (ret < 0)
+			return ret;
+	}
+
+
+	wm8940_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8940_dai);
+	if (ret) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wm8940_unregister(struct wm8940_priv *wm8940)
+{
+	wm8940_set_bias_level(&wm8940->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8940_dai);
+	snd_soc_unregister_codec(&wm8940->codec);
+	kfree(wm8940);
+	wm8940_codec = NULL;
+}
+
+static int wm8940_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8940_priv *wm8940;
+	struct snd_soc_codec *codec;
+
+	wm8940 = kzalloc(sizeof *wm8940, GFP_KERNEL);
+	if (wm8940 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8940->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	i2c_set_clientdata(i2c, wm8940);
+	codec->control_data = i2c;
+	codec->dev = &i2c->dev;
+
+	return wm8940_register(wm8940);
+}
+
+static int __devexit wm8940_i2c_remove(struct i2c_client *client)
+{
+	struct wm8940_priv *wm8940 = i2c_get_clientdata(client);
+
+	wm8940_unregister(wm8940);
+
+	return 0;
+}
+
+static const struct i2c_device_id wm8940_i2c_id[] = {
+	{ "wm8940", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8940_i2c_id);
+
+static struct i2c_driver wm8940_i2c_driver = {
+	.driver = {
+		.name = "WM8940 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm8940_i2c_probe,
+	.remove = __devexit_p(wm8940_i2c_remove),
+	.id_table = wm8940_i2c_id,
+};
+
+static int __init wm8940_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8940_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "Failed to register WM8940 I2C driver: %d\n",
+		       ret);
+	return ret;
+}
+module_init(wm8940_modinit);
+
+static void __exit wm8940_exit(void)
+{
+	i2c_del_driver(&wm8940_i2c_driver);
+}
+module_exit(wm8940_exit);
+
+MODULE_DESCRIPTION("ASoC WM8940 driver");
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h
new file mode 100644
index 00000000000..8410eed3ef8
--- /dev/null
+++ b/sound/soc/codecs/wm8940.h
@@ -0,0 +1,104 @@
+/*
+ * wm8940.h -- WM8940 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8940_H
+#define _WM8940_H
+
+struct wm8940_setup_data {
+	/* Vref to analogue output resistance */
+#define WM8940_VROI_1K 0
+#define WM8940_VROI_30K 1
+	unsigned int vroi:1;
+};
+extern struct snd_soc_dai wm8940_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8940;
+
+/* WM8940 register space */
+#define WM8940_SOFTRESET	0x00
+#define WM8940_POWER1		0x01
+#define WM8940_POWER2		0x02
+#define WM8940_POWER3		0x03
+#define WM8940_IFACE		0x04
+#define WM8940_COMPANDINGCTL	0x05
+#define WM8940_CLOCK		0x06
+#define WM8940_ADDCNTRL		0x07
+#define WM8940_GPIO		0x08
+#define WM8940_CTLINT		0x09
+#define WM8940_DAC		0x0A
+#define WM8940_DACVOL		0x0B
+
+#define WM8940_ADC		0x0E
+#define WM8940_ADCVOL		0x0F
+#define WM8940_NOTCH1		0x10
+#define WM8940_NOTCH2		0x11
+#define WM8940_NOTCH3		0x12
+#define WM8940_NOTCH4		0x13
+#define WM8940_NOTCH5		0x14
+#define WM8940_NOTCH6		0x15
+#define WM8940_NOTCH7		0x16
+#define WM8940_NOTCH8		0x17
+#define WM8940_DACLIM1		0x18
+#define WM8940_DACLIM2		0x19
+
+#define WM8940_ALC1		0x20
+#define WM8940_ALC2		0x21
+#define WM8940_ALC3		0x22
+#define WM8940_NOISEGATE	0x23
+#define WM8940_PLLN		0x24
+#define WM8940_PLLK1		0x25
+#define WM8940_PLLK2		0x26
+#define WM8940_PLLK3		0x27
+
+#define WM8940_ALC4		0x2A
+
+#define WM8940_INPUTCTL		0x2C
+#define WM8940_PGAGAIN		0x2D
+
+#define WM8940_ADCBOOST		0x2F
+
+#define WM8940_OUTPUTCTL	0x31
+#define WM8940_SPKMIX		0x32
+
+#define WM8940_SPKVOL		0x36
+
+#define WM8940_MONOMIX		0x38
+
+#define WM8940_CACHEREGNUM  0x57
+
+
+/* Clock divider Id's */
+#define WM8940_BCLKDIV 0
+#define WM8940_MCLKDIV 1
+#define WM8940_OPCLKDIV 2
+
+/* MCLK clock dividers */
+#define WM8940_MCLKDIV_1	0
+#define WM8940_MCLKDIV_1_5	1
+#define WM8940_MCLKDIV_2	2
+#define WM8940_MCLKDIV_3	3
+#define WM8940_MCLKDIV_4	4
+#define WM8940_MCLKDIV_6	5
+#define WM8940_MCLKDIV_8	6
+#define WM8940_MCLKDIV_12	7
+
+/* BCLK clock dividers */
+#define WM8940_BCLKDIV_1 0
+#define WM8940_BCLKDIV_2 1
+#define WM8940_BCLKDIV_4 2
+#define WM8940_BCLKDIV_8 3
+#define WM8940_BCLKDIV_16 4
+#define WM8940_BCLKDIV_32 5
+
+/* PLL Out Dividers */
+#define WM8940_OPCLKDIV_1 0
+#define WM8940_OPCLKDIV_2 1
+#define WM8940_OPCLKDIV_3 2
+#define WM8940_OPCLKDIV_4 3
+
+#endif /* _WM8940_H */
+
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
new file mode 100644
index 00000000000..e224d8add17
--- /dev/null
+++ b/sound/soc/codecs/wm8960.c
@@ -0,0 +1,969 @@
+/*
+ * wm8960.c  --  WM8960 ALSA SoC Audio driver
+ *
+ * Author: Liam Girdwood
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8960.h"
+
+#define AUDIO_NAME "wm8960"
+
+struct snd_soc_codec_device soc_codec_dev_wm8960;
+
+/* R25 - Power 1 */
+#define WM8960_VREF      0x40
+
+/* R28 - Anti-pop 1 */
+#define WM8960_POBCTRL   0x80
+#define WM8960_BUFDCOPEN 0x10
+#define WM8960_BUFIOEN   0x08
+#define WM8960_SOFT_ST   0x04
+#define WM8960_HPSTBY    0x01
+
+/* R29 - Anti-pop 2 */
+#define WM8960_DISOP     0x40
+
+/*
+ * wm8960 register cache
+ * We can't read the WM8960 register space when we are
+ * using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8960_reg[WM8960_CACHEREGNUM] = {
+	0x0097, 0x0097, 0x0000, 0x0000,
+	0x0000, 0x0008, 0x0000, 0x000a,
+	0x01c0, 0x0000, 0x00ff, 0x00ff,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x007b, 0x0100, 0x0032,
+	0x0000, 0x00c3, 0x00c3, 0x01c0,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0100, 0x0100, 0x0050, 0x0050,
+	0x0050, 0x0050, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0040, 0x0000,
+	0x0000, 0x0050, 0x0050, 0x0000,
+	0x0002, 0x0037, 0x004d, 0x0080,
+	0x0008, 0x0031, 0x0026, 0x00e9,
+};
+
+struct wm8960_priv {
+	u16 reg_cache[WM8960_CACHEREGNUM];
+	struct snd_soc_codec codec;
+};
+
+/*
+ * read wm8960 register cache
+ */
+static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg == WM8960_RESET)
+		return 0;
+	if (reg >= WM8960_CACHEREGNUM)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write wm8960 register cache
+ */
+static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec,
+	u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg >= WM8960_CACHEREGNUM)
+		return;
+	cache[reg] = value;
+}
+
+static inline unsigned int wm8960_read(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	return wm8960_read_reg_cache(codec, reg);
+}
+
+/*
+ * write to the WM8960 register space
+ */
+static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8960 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8960_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8960_reset(c)	wm8960_write(c, WM8960_RESET, 0)
+
+/* enumerated controls */
+static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
+	"Right Inverted", "Stereo Inversion"};
+static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
+static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
+static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
+static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
+
+static const struct soc_enum wm8960_enum[] = {
+	SOC_ENUM_SINGLE(WM8960_DACCTL1, 1, 4, wm8960_deemph),
+	SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
+	SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
+	SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
+	SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff),
+	SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
+	SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
+};
+
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+
+static const struct snd_kcontrol_new wm8960_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
+		 0, 63, 0, adc_tlv),
+SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
+	6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
+	7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC,
+		 0, 255, 0, dac_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1,
+	7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2,
+	7, 1, 0),
+SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
+
+SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
+SOC_ENUM("ADC Polarity", wm8960_enum[1]),
+SOC_ENUM("Playback De-emphasis", wm8960_enum[0]),
+SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
+
+SOC_ENUM("DAC Polarity", wm8960_enum[2]),
+
+SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[3]),
+SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[4]),
+SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
+SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
+
+SOC_ENUM("ALC Function", wm8960_enum[5]),
+SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
+SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
+SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
+SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
+SOC_ENUM("ALC Mode", wm8960_enum[6]),
+SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
+
+SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0),
+SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0),
+
+SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH,
+	0, 127, 0),
+
+SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume",
+	       WM8960_BYPASS1, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume",
+	       WM8960_LOUTMIX, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume",
+	       WM8960_BYPASS2, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
+	       WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
+};
+
+static const struct snd_kcontrol_new wm8960_lin_boost[] = {
+SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
+SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_lin[] = {
+SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_rin_boost[] = {
+SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0),
+SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_rin[] = {
+SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_loutput_mixer[] = {
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0),
+SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_routput_mixer[] = {
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0),
+SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_mono_out[] = {
+SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("LINPUT1"),
+SND_SOC_DAPM_INPUT("RINPUT1"),
+SND_SOC_DAPM_INPUT("LINPUT2"),
+SND_SOC_DAPM_INPUT("RINPUT2"),
+SND_SOC_DAPM_INPUT("LINPUT3"),
+SND_SOC_DAPM_INPUT("RINPUT3"),
+
+SND_SOC_DAPM_MICBIAS("MICB", WM8960_POWER1, 1, 0),
+
+SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0,
+		   wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)),
+SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0,
+		   wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)),
+
+SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0,
+		   wm8960_lin, ARRAY_SIZE(wm8960_lin)),
+SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0,
+		   wm8960_rin, ARRAY_SIZE(wm8960_rin)),
+
+SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER2, 3, 0),
+SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER2, 2, 0),
+
+SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
+SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
+	&wm8960_loutput_mixer[0],
+	ARRAY_SIZE(wm8960_loutput_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0,
+	&wm8960_routput_mixer[0],
+	ARRAY_SIZE(wm8960_routput_mixer)),
+
+SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0,
+	&wm8960_mono_out[0],
+	ARRAY_SIZE(wm8960_mono_out)),
+
+SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("SPK_LP"),
+SND_SOC_DAPM_OUTPUT("SPK_LN"),
+SND_SOC_DAPM_OUTPUT("HP_L"),
+SND_SOC_DAPM_OUTPUT("HP_R"),
+SND_SOC_DAPM_OUTPUT("SPK_RP"),
+SND_SOC_DAPM_OUTPUT("SPK_RN"),
+SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+	{ "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" },
+	{ "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" },
+	{ "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" },
+
+	{ "Left Input Mixer", "Boost Switch", "Left Boost Mixer", },
+	{ "Left Input Mixer", NULL, "LINPUT1", },  /* Really Boost Switch */
+	{ "Left Input Mixer", NULL, "LINPUT2" },
+	{ "Left Input Mixer", NULL, "LINPUT3" },
+
+	{ "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" },
+	{ "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" },
+	{ "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" },
+
+	{ "Right Input Mixer", "Boost Switch", "Right Boost Mixer", },
+	{ "Right Input Mixer", NULL, "RINPUT1", },  /* Really Boost Switch */
+	{ "Right Input Mixer", NULL, "RINPUT2" },
+	{ "Right Input Mixer", NULL, "LINPUT3" },
+
+	{ "Left ADC", NULL, "Left Input Mixer" },
+	{ "Right ADC", NULL, "Right Input Mixer" },
+
+	{ "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
+	{ "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} ,
+	{ "Left Output Mixer", "PCM Playback Switch", "Left DAC" },
+
+	{ "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" },
+	{ "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } ,
+	{ "Right Output Mixer", "PCM Playback Switch", "Right DAC" },
+
+	{ "Mono Output Mixer", "Left Switch", "Left Output Mixer" },
+	{ "Mono Output Mixer", "Right Switch", "Right Output Mixer" },
+
+	{ "LOUT1 PGA", NULL, "Left Output Mixer" },
+	{ "ROUT1 PGA", NULL, "Right Output Mixer" },
+
+	{ "HP_L", NULL, "LOUT1 PGA" },
+	{ "HP_R", NULL, "ROUT1 PGA" },
+
+	{ "Left Speaker PGA", NULL, "Left Output Mixer" },
+	{ "Right Speaker PGA", NULL, "Right Output Mixer" },
+
+	{ "Left Speaker Output", NULL, "Left Speaker PGA" },
+	{ "Right Speaker Output", NULL, "Right Speaker PGA" },
+
+	{ "SPK_LN", NULL, "Left Speaker Output" },
+	{ "SPK_LP", NULL, "Left Speaker Output" },
+	{ "SPK_RN", NULL, "Right Speaker Output" },
+	{ "SPK_RP", NULL, "Right Speaker Output" },
+
+	{ "OUT3", NULL, "Mono Output Mixer", }
+};
+
+static int wm8960_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8960_dapm_widgets,
+				  ARRAY_SIZE(wm8960_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+
+	snd_soc_dapm_new_widgets(codec);
+	return 0;
+}
+
+static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface |= 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set iface */
+	wm8960_write(codec, WM8960_IFACE1, iface);
+	return 0;
+}
+
+static int wm8960_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3;
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	}
+
+	/* set iface */
+	wm8960_write(codec, WM8960_IFACE1, iface);
+	return 0;
+}
+
+static int wm8960_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7;
+
+	if (mute)
+		wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
+	else
+		wm8960_write(codec, WM8960_DACCTL1, mute_reg);
+	return 0;
+}
+
+static int wm8960_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	struct wm8960_data *pdata = codec->dev->platform_data;
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* Set VMID to 2x50k */
+		reg = wm8960_read(codec, WM8960_POWER1);
+		reg &= ~0x180;
+		reg |= 0x80;
+		wm8960_write(codec, WM8960_POWER1, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* Enable anti-pop features */
+			wm8960_write(codec, WM8960_APOP1,
+				     WM8960_POBCTRL | WM8960_SOFT_ST |
+				     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
+
+			/* Discharge HP output */
+			reg = WM8960_DISOP;
+			if (pdata)
+				reg |= pdata->dres << 4;
+			wm8960_write(codec, WM8960_APOP2, reg);
+
+			msleep(400);
+
+			wm8960_write(codec, WM8960_APOP2, 0);
+
+			/* Enable & ramp VMID at 2x50k */
+			reg = wm8960_read(codec, WM8960_POWER1);
+			reg |= 0x80;
+			wm8960_write(codec, WM8960_POWER1, reg);
+			msleep(100);
+
+			/* Enable VREF */
+			wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF);
+
+			/* Disable anti-pop features */
+			wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+		}
+
+		/* Set VMID to 2x250k */
+		reg = wm8960_read(codec, WM8960_POWER1);
+		reg &= ~0x180;
+		reg |= 0x100;
+		wm8960_write(codec, WM8960_POWER1, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Enable anti-pop features */
+		wm8960_write(codec, WM8960_APOP1,
+			     WM8960_POBCTRL | WM8960_SOFT_ST |
+			     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
+
+		/* Disable VMID and VREF, let them discharge */
+		wm8960_write(codec, WM8960_POWER1, 0);
+		msleep(600);
+
+		wm8960_write(codec, WM8960_APOP1, 0);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+/* PLL divisors */
+struct _pll_div {
+	u32 pre_div:1;
+	u32 n:4;
+	u32 k:24;
+};
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+
+static int pll_factors(unsigned int source, unsigned int target,
+		       struct _pll_div *pll_div)
+{
+	unsigned long long Kpart;
+	unsigned int K, Ndiv, Nmod;
+
+	pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target);
+
+	/* Scale up target to PLL operating frequency */
+	target *= 4;
+
+	Ndiv = target / source;
+	if (Ndiv < 6) {
+		source >>= 1;
+		pll_div->pre_div = 1;
+		Ndiv = target / source;
+	} else
+		pll_div->pre_div = 0;
+
+	if ((Ndiv < 6) || (Ndiv > 12)) {
+		pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);
+		return -EINVAL;
+	}
+
+	pll_div->n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	/* Check if we need to round */
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	K /= 10;
+
+	pll_div->k = K;
+
+	pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n",
+		 pll_div->n, pll_div->k, pll_div->pre_div);
+
+	return 0;
+}
+
+static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+	static struct _pll_div pll_div;
+	int ret;
+
+	if (freq_in && freq_out) {
+		ret = pll_factors(freq_in, freq_out, &pll_div);
+		if (ret != 0)
+			return ret;
+	}
+
+	/* Disable the PLL: even if we are changing the frequency the
+	 * PLL needs to be disabled while we do so. */
+	wm8960_write(codec, WM8960_CLOCK1,
+		     wm8960_read(codec, WM8960_CLOCK1) & ~1);
+	wm8960_write(codec, WM8960_POWER2,
+		     wm8960_read(codec, WM8960_POWER2) & ~1);
+
+	if (!freq_in || !freq_out)
+		return 0;
+
+	reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f;
+	reg |= pll_div.pre_div << 4;
+	reg |= pll_div.n;
+
+	if (pll_div.k) {
+		reg |= 0x20;
+
+		wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
+		wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
+		wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
+	}
+	wm8960_write(codec, WM8960_PLL1, reg);
+
+	/* Turn it on */
+	wm8960_write(codec, WM8960_POWER2,
+		     wm8960_read(codec, WM8960_POWER2) | 1);
+	msleep(250);
+	wm8960_write(codec, WM8960_CLOCK1,
+		     wm8960_read(codec, WM8960_CLOCK1) | 1);
+
+	return 0;
+}
+
+static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+		int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	switch (div_id) {
+	case WM8960_SYSCLKSEL:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_SYSCLKDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_DACDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_OPCLKDIV:
+		reg = wm8960_read(codec, WM8960_PLL1) & 0x03f;
+		wm8960_write(codec, WM8960_PLL1, reg | div);
+		break;
+	case WM8960_DCLKDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f;
+		wm8960_write(codec, WM8960_CLOCK2, reg | div);
+		break;
+	case WM8960_TOCLKSEL:
+		reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd;
+		wm8960_write(codec, WM8960_ADDCTL1, reg | div);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#define WM8960_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8960_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8960_dai_ops = {
+	.hw_params = wm8960_hw_params,
+	.digital_mute = wm8960_mute,
+	.set_fmt = wm8960_set_dai_fmt,
+	.set_clkdiv = wm8960_set_dai_clkdiv,
+	.set_pll = wm8960_set_dai_pll,
+};
+
+struct snd_soc_dai wm8960_dai = {
+	.name = "WM8960",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8960_RATES,
+		.formats = WM8960_FORMATS,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8960_RATES,
+		.formats = WM8960_FORMATS,},
+	.ops = &wm8960_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8960_dai);
+
+static int wm8960_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8960_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) {
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	wm8960_set_bias_level(codec, codec->suspend_bias_level);
+	return 0;
+}
+
+static struct snd_soc_codec *wm8960_codec;
+
+static int wm8960_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8960_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8960_codec;
+	codec = wm8960_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8960_snd_controls,
+			     ARRAY_SIZE(wm8960_snd_controls));
+	wm8960_add_widgets(codec);
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8960_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8960 = {
+	.probe = 	wm8960_probe,
+	.remove = 	wm8960_remove,
+	.suspend = 	wm8960_suspend,
+	.resume =	wm8960_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960);
+
+static int wm8960_register(struct wm8960_priv *wm8960)
+{
+	struct wm8960_data *pdata = wm8960->codec.dev->platform_data;
+	struct snd_soc_codec *codec = &wm8960->codec;
+	int ret;
+	u16 reg;
+
+	if (wm8960_codec) {
+		dev_err(codec->dev, "Another WM8960 is registered\n");
+		return -EINVAL;
+	}
+
+	if (!pdata) {
+		dev_warn(codec->dev, "No platform data supplied\n");
+	} else {
+		if (pdata->dres > WM8960_DRES_MAX) {
+			dev_err(codec->dev, "Invalid DRES: %d\n", pdata->dres);
+			pdata->dres = 0;
+		}
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8960;
+	codec->name = "WM8960";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8960_read_reg_cache;
+	codec->write = wm8960_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8960_set_bias_level;
+	codec->dai = &wm8960_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8960_CACHEREGNUM;
+	codec->reg_cache = &wm8960->reg_cache;
+
+	memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg));
+
+	ret = wm8960_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm8960_dai.dev = codec->dev;
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Latch the update bits */
+	reg = wm8960_read(codec, WM8960_LINVOL);
+	wm8960_write(codec, WM8960_LINVOL, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RINVOL);
+	wm8960_write(codec, WM8960_RINVOL, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LADC);
+	wm8960_write(codec, WM8960_LADC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RADC);
+	wm8960_write(codec, WM8960_RADC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LDAC);
+	wm8960_write(codec, WM8960_LDAC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RDAC);
+	wm8960_write(codec, WM8960_RDAC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LOUT1);
+	wm8960_write(codec, WM8960_LOUT1, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_ROUT1);
+	wm8960_write(codec, WM8960_ROUT1, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LOUT2);
+	wm8960_write(codec, WM8960_LOUT2, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_ROUT2);
+	wm8960_write(codec, WM8960_ROUT2, reg | 0x100);
+
+	wm8960_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8960_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wm8960_unregister(struct wm8960_priv *wm8960)
+{
+	wm8960_set_bias_level(&wm8960->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8960_dai);
+	snd_soc_unregister_codec(&wm8960->codec);
+	kfree(wm8960);
+	wm8960_codec = NULL;
+}
+
+static __devinit int wm8960_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8960_priv *wm8960;
+	struct snd_soc_codec *codec;
+
+	wm8960 = kzalloc(sizeof(struct wm8960_priv), GFP_KERNEL);
+	if (wm8960 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8960->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8960);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8960_register(wm8960);
+}
+
+static __devexit int wm8960_i2c_remove(struct i2c_client *client)
+{
+	struct wm8960_priv *wm8960 = i2c_get_clientdata(client);
+	wm8960_unregister(wm8960);
+	return 0;
+}
+
+static const struct i2c_device_id wm8960_i2c_id[] = {
+	{ "wm8960", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
+
+static struct i2c_driver wm8960_i2c_driver = {
+	.driver = {
+		.name = "WM8960 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8960_i2c_probe,
+	.remove =   __devexit_p(wm8960_i2c_remove),
+	.id_table = wm8960_i2c_id,
+};
+
+static int __init wm8960_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8960_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n",
+		       ret);
+	}
+
+	return ret;
+}
+module_init(wm8960_modinit);
+
+static void __exit wm8960_exit(void)
+{
+	i2c_del_driver(&wm8960_i2c_driver);
+}
+module_exit(wm8960_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8960 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h
new file mode 100644
index 00000000000..c9af56c9d9d
--- /dev/null
+++ b/sound/soc/codecs/wm8960.h
@@ -0,0 +1,127 @@
+/*
+ * wm8960.h  --  WM8960 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8960_H
+#define _WM8960_H
+
+/* WM8960 register space */
+
+
+#define WM8960_CACHEREGNUM 	56
+
+#define WM8960_LINVOL		0x0
+#define WM8960_RINVOL		0x1
+#define WM8960_LOUT1		0x2
+#define WM8960_ROUT1		0x3
+#define WM8960_CLOCK1		0x4
+#define WM8960_DACCTL1		0x5
+#define WM8960_DACCTL2		0x6
+#define WM8960_IFACE1		0x7
+#define WM8960_CLOCK2		0x8
+#define WM8960_IFACE2		0x9
+#define WM8960_LDAC		0xa
+#define WM8960_RDAC		0xb
+
+#define WM8960_RESET		0xf
+#define WM8960_3D		0x10
+#define WM8960_ALC1		0x11
+#define WM8960_ALC2		0x12
+#define WM8960_ALC3		0x13
+#define WM8960_NOISEG		0x14
+#define WM8960_LADC		0x15
+#define WM8960_RADC		0x16
+#define WM8960_ADDCTL1		0x17
+#define WM8960_ADDCTL2		0x18
+#define WM8960_POWER1		0x19
+#define WM8960_POWER2		0x1a
+#define WM8960_ADDCTL3		0x1b
+#define WM8960_APOP1		0x1c
+#define WM8960_APOP2		0x1d
+
+#define WM8960_LINPATH		0x20
+#define WM8960_RINPATH		0x21
+#define WM8960_LOUTMIX		0x22
+
+#define WM8960_ROUTMIX		0x25
+#define WM8960_MONOMIX1		0x26
+#define WM8960_MONOMIX2		0x27
+#define WM8960_LOUT2		0x28
+#define WM8960_ROUT2		0x29
+#define WM8960_MONO		0x2a
+#define WM8960_INBMIX1		0x2b
+#define WM8960_INBMIX2		0x2c
+#define WM8960_BYPASS1		0x2d
+#define WM8960_BYPASS2		0x2e
+#define WM8960_POWER3		0x2f
+#define WM8960_ADDCTL4		0x30
+#define WM8960_CLASSD1		0x31
+
+#define WM8960_CLASSD3		0x33
+#define WM8960_PLL1		0x34
+#define WM8960_PLL2		0x35
+#define WM8960_PLL3		0x36
+#define WM8960_PLL4		0x37
+
+
+/*
+ * WM8960 Clock dividers
+ */
+#define WM8960_SYSCLKDIV 		0
+#define WM8960_DACDIV			1
+#define WM8960_OPCLKDIV			2
+#define WM8960_DCLKDIV			3
+#define WM8960_TOCLKSEL			4
+#define WM8960_SYSCLKSEL		5
+
+#define WM8960_SYSCLK_DIV_1		(0 << 1)
+#define WM8960_SYSCLK_DIV_2		(2 << 1)
+
+#define WM8960_SYSCLK_MCLK		(0 << 0)
+#define WM8960_SYSCLK_PLL		(1 << 0)
+
+#define WM8960_DAC_DIV_1		(0 << 3)
+#define WM8960_DAC_DIV_1_5		(1 << 3)
+#define WM8960_DAC_DIV_2		(2 << 3)
+#define WM8960_DAC_DIV_3		(3 << 3)
+#define WM8960_DAC_DIV_4		(4 << 3)
+#define WM8960_DAC_DIV_5_5		(5 << 3)
+#define WM8960_DAC_DIV_6		(6 << 3)
+
+#define WM8960_DCLK_DIV_1_5		(0 << 6)
+#define WM8960_DCLK_DIV_2		(1 << 6)
+#define WM8960_DCLK_DIV_3		(2 << 6)
+#define WM8960_DCLK_DIV_4		(3 << 6)
+#define WM8960_DCLK_DIV_6		(4 << 6)
+#define WM8960_DCLK_DIV_8		(5 << 6)
+#define WM8960_DCLK_DIV_12		(6 << 6)
+#define WM8960_DCLK_DIV_16		(7 << 6)
+
+#define WM8960_TOCLK_F19		(0 << 1)
+#define WM8960_TOCLK_F21		(1 << 1)
+
+#define WM8960_OPCLK_DIV_1		(0 << 0)
+#define WM8960_OPCLK_DIV_2		(1 << 0)
+#define WM8960_OPCLK_DIV_3		(2 << 0)
+#define WM8960_OPCLK_DIV_4		(3 << 0)
+#define WM8960_OPCLK_DIV_5_5		(4 << 0)
+#define WM8960_OPCLK_DIV_6		(5 << 0)
+
+extern struct snd_soc_dai wm8960_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8960;
+
+#define WM8960_DRES_400R 0
+#define WM8960_DRES_200R 1
+#define WM8960_DRES_600R 2
+#define WM8960_DRES_150R 3
+#define WM8960_DRES_MAX  3
+
+struct wm8960_data {
+	int dres;
+};
+
+#endif
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
new file mode 100644
index 00000000000..c05f71803aa
--- /dev/null
+++ b/sound/soc/codecs/wm8988.c
@@ -0,0 +1,1097 @@
+/*
+ * wm8988.c -- WM8988 ALSA SoC audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "wm8988.h"
+
+/*
+ * wm8988 register cache
+ * We can't read the WM8988 register space when we
+ * are using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8988_reg[] = {
+	0x0097, 0x0097, 0x0079, 0x0079,  /*  0 */
+	0x0000, 0x0008, 0x0000, 0x000a,  /*  4 */
+	0x0000, 0x0000, 0x00ff, 0x00ff,  /*  8 */
+	0x000f, 0x000f, 0x0000, 0x0000,  /* 12 */
+	0x0000, 0x007b, 0x0000, 0x0032,  /* 16 */
+	0x0000, 0x00c3, 0x00c3, 0x00c0,  /* 20 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 24 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 28 */
+	0x0000, 0x0000, 0x0050, 0x0050,  /* 32 */
+	0x0050, 0x0050, 0x0050, 0x0050,  /* 36 */
+	0x0079, 0x0079, 0x0079,          /* 40 */
+};
+
+/* codec private data */
+struct wm8988_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	struct snd_pcm_hw_constraint_list *sysclk_constraints;
+	u16 reg_cache[WM8988_NUM_REG];
+};
+
+
+/*
+ * read wm8988 register cache
+ */
+static inline unsigned int wm8988_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg > WM8988_NUM_REG)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write wm8988 register cache
+ */
+static inline void wm8988_write_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg > WM8988_NUM_REG)
+		return;
+	cache[reg] = value;
+}
+
+static int wm8988_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8753 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8988_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8988_reset(c)	wm8988_write(c, WM8988_RESET, 0)
+
+/*
+ * WM8988 Controls
+ */
+
+static const char *bass_boost_txt[] = {"Linear Control", "Adaptive Boost"};
+static const struct soc_enum bass_boost =
+	SOC_ENUM_SINGLE(WM8988_BASS, 7, 2, bass_boost_txt);
+
+static const char *bass_filter_txt[] = { "130Hz @ 48kHz", "200Hz @ 48kHz" };
+static const struct soc_enum bass_filter =
+	SOC_ENUM_SINGLE(WM8988_BASS, 6, 2, bass_filter_txt);
+
+static const char *treble_txt[] = {"8kHz", "4kHz"};
+static const struct soc_enum treble =
+	SOC_ENUM_SINGLE(WM8988_TREBLE, 6, 2, treble_txt);
+
+static const char *stereo_3d_lc_txt[] = {"200Hz", "500Hz"};
+static const struct soc_enum stereo_3d_lc =
+	SOC_ENUM_SINGLE(WM8988_3D, 5, 2, stereo_3d_lc_txt);
+
+static const char *stereo_3d_uc_txt[] = {"2.2kHz", "1.5kHz"};
+static const struct soc_enum stereo_3d_uc =
+	SOC_ENUM_SINGLE(WM8988_3D, 6, 2, stereo_3d_uc_txt);
+
+static const char *stereo_3d_func_txt[] = {"Capture", "Playback"};
+static const struct soc_enum stereo_3d_func =
+	SOC_ENUM_SINGLE(WM8988_3D, 7, 2, stereo_3d_func_txt);
+
+static const char *alc_func_txt[] = {"Off", "Right", "Left", "Stereo"};
+static const struct soc_enum alc_func =
+	SOC_ENUM_SINGLE(WM8988_ALC1, 7, 4, alc_func_txt);
+
+static const char *ng_type_txt[] = {"Constant PGA Gain",
+				    "Mute ADC Output"};
+static const struct soc_enum ng_type =
+	SOC_ENUM_SINGLE(WM8988_NGATE, 1, 2, ng_type_txt);
+
+static const char *deemph_txt[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const struct soc_enum deemph =
+	SOC_ENUM_SINGLE(WM8988_ADCDAC, 1, 4, deemph_txt);
+
+static const char *adcpol_txt[] = {"Normal", "L Invert", "R Invert",
+				   "L + R Invert"};
+static const struct soc_enum adcpol =
+	SOC_ENUM_SINGLE(WM8988_ADCDAC, 5, 4, adcpol_txt);
+
+static const DECLARE_TLV_DB_SCALE(pga_tlv, -1725, 75, 0);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
+
+static const struct snd_kcontrol_new wm8988_snd_controls[] = {
+
+SOC_ENUM("Bass Boost", bass_boost),
+SOC_ENUM("Bass Filter", bass_filter),
+SOC_SINGLE("Bass Volume", WM8988_BASS, 0, 15, 1),
+
+SOC_SINGLE("Treble Volume", WM8988_TREBLE, 0, 15, 0),
+SOC_ENUM("Treble Cut-off", treble),
+
+SOC_SINGLE("3D Switch", WM8988_3D, 0, 1, 0),
+SOC_SINGLE("3D Volume", WM8988_3D, 1, 15, 0),
+SOC_ENUM("3D Lower Cut-off", stereo_3d_lc),
+SOC_ENUM("3D Upper Cut-off", stereo_3d_uc),
+SOC_ENUM("3D Mode", stereo_3d_func),
+
+SOC_SINGLE("ALC Capture Target Volume", WM8988_ALC1, 0, 7, 0),
+SOC_SINGLE("ALC Capture Max Volume", WM8988_ALC1, 4, 7, 0),
+SOC_ENUM("ALC Capture Function", alc_func),
+SOC_SINGLE("ALC Capture ZC Switch", WM8988_ALC2, 7, 1, 0),
+SOC_SINGLE("ALC Capture Hold Time", WM8988_ALC2, 0, 15, 0),
+SOC_SINGLE("ALC Capture Decay Time", WM8988_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Capture Attack Time", WM8988_ALC3, 0, 15, 0),
+SOC_SINGLE("ALC Capture NG Threshold", WM8988_NGATE, 3, 31, 0),
+SOC_ENUM("ALC Capture NG Type", ng_type),
+SOC_SINGLE("ALC Capture NG Switch", WM8988_NGATE, 0, 1, 0),
+
+SOC_SINGLE("ZC Timeout Switch", WM8988_ADCTL1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Digital Volume", WM8988_LADC, WM8988_RADC,
+		 0, 255, 0, adc_tlv),
+SOC_DOUBLE_R_TLV("Capture Volume", WM8988_LINVOL, WM8988_RINVOL,
+		 0, 63, 0, pga_tlv),
+SOC_DOUBLE_R("Capture ZC Switch", WM8988_LINVOL, WM8988_RINVOL, 6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8988_LINVOL, WM8988_RINVOL, 7, 1, 1),
+
+SOC_ENUM("Playback De-emphasis", deemph),
+
+SOC_ENUM("Capture Polarity", adcpol),
+SOC_SINGLE("Playback 6dB Attenuate", WM8988_ADCDAC, 7, 1, 0),
+SOC_SINGLE("Capture 6dB Attenuate", WM8988_ADCDAC, 8, 1, 0),
+
+SOC_DOUBLE_R_TLV("PCM Volume", WM8988_LDAC, WM8988_RDAC, 0, 255, 0, dac_tlv),
+
+SOC_SINGLE_TLV("Left Mixer Left Bypass Volume", WM8988_LOUTM1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Left Mixer Right Bypass Volume", WM8988_LOUTM2, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Mixer Left Bypass Volume", WM8988_ROUTM1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Mixer Right Bypass Volume", WM8988_ROUTM2, 4, 7, 1,
+	       bypass_tlv),
+
+SOC_DOUBLE_R("Output 1 Playback ZC Switch", WM8988_LOUT1V,
+	     WM8988_ROUT1V, 7, 1, 0),
+SOC_DOUBLE_R_TLV("Output 1 Playback Volume", WM8988_LOUT1V, WM8988_ROUT1V,
+		 0, 127, 0, out_tlv),
+
+SOC_DOUBLE_R("Output 2 Playback ZC Switch", WM8988_LOUT2V,
+	     WM8988_ROUT2V, 7, 1, 0),
+SOC_DOUBLE_R_TLV("Output 2 Playback Volume", WM8988_LOUT2V, WM8988_ROUT2V,
+		 0, 127, 0, out_tlv),
+
+};
+
+/*
+ * DAPM Controls
+ */
+
+static int wm8988_lrc_control(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 adctl2 = wm8988_read_reg_cache(codec, WM8988_ADCTL2);
+
+	/* Use the DAC to gate LRC if active, otherwise use ADC */
+	if (wm8988_read_reg_cache(codec, WM8988_PWR2) & 0x180)
+		adctl2 &= ~0x4;
+	else
+		adctl2 |= 0x4;
+
+	return wm8988_write(codec, WM8988_ADCTL2, adctl2);
+}
+
+static const char *wm8988_line_texts[] = {
+	"Line 1", "Line 2", "PGA", "Differential"};
+
+static const unsigned int wm8988_line_values[] = {
+	0, 1, 3, 4};
+
+static const struct soc_enum wm8988_lline_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_LOUTM1, 0, 7,
+			      ARRAY_SIZE(wm8988_line_texts),
+			      wm8988_line_texts,
+			      wm8988_line_values);
+static const struct snd_kcontrol_new wm8988_left_line_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
+
+static const struct soc_enum wm8988_rline_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_ROUTM1, 0, 7,
+			      ARRAY_SIZE(wm8988_line_texts),
+			      wm8988_line_texts,
+			      wm8988_line_values);
+static const struct snd_kcontrol_new wm8988_right_line_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
+
+/* Left Mixer */
+static const struct snd_kcontrol_new wm8988_left_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Playback Switch", WM8988_LOUTM1, 8, 1, 0),
+	SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_LOUTM1, 7, 1, 0),
+	SOC_DAPM_SINGLE("Right Playback Switch", WM8988_LOUTM2, 8, 1, 0),
+	SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_LOUTM2, 7, 1, 0),
+};
+
+/* Right Mixer */
+static const struct snd_kcontrol_new wm8988_right_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Left Playback Switch", WM8988_ROUTM1, 8, 1, 0),
+	SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_ROUTM1, 7, 1, 0),
+	SOC_DAPM_SINGLE("Playback Switch", WM8988_ROUTM2, 8, 1, 0),
+	SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_ROUTM2, 7, 1, 0),
+};
+
+static const char *wm8988_pga_sel[] = {"Line 1", "Line 2", "Differential"};
+static const unsigned int wm8988_pga_val[] = { 0, 1, 3 };
+
+/* Left PGA Mux */
+static const struct soc_enum wm8988_lpga_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_LADCIN, 6, 3,
+			      ARRAY_SIZE(wm8988_pga_sel),
+			      wm8988_pga_sel,
+			      wm8988_pga_val);
+static const struct snd_kcontrol_new wm8988_left_pga_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lpga_enum);
+
+/* Right PGA Mux */
+static const struct soc_enum wm8988_rpga_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_RADCIN, 6, 3,
+			      ARRAY_SIZE(wm8988_pga_sel),
+			      wm8988_pga_sel,
+			      wm8988_pga_val);
+static const struct snd_kcontrol_new wm8988_right_pga_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_rpga_enum);
+
+/* Differential Mux */
+static const char *wm8988_diff_sel[] = {"Line 1", "Line 2"};
+static const struct soc_enum diffmux =
+	SOC_ENUM_SINGLE(WM8988_ADCIN, 8, 2, wm8988_diff_sel);
+static const struct snd_kcontrol_new wm8988_diffmux_controls =
+	SOC_DAPM_ENUM("Route", diffmux);
+
+/* Mono ADC Mux */
+static const char *wm8988_mono_mux[] = {"Stereo", "Mono (Left)",
+	"Mono (Right)", "Digital Mono"};
+static const struct soc_enum monomux =
+	SOC_ENUM_SINGLE(WM8988_ADCIN, 6, 4, wm8988_mono_mux);
+static const struct snd_kcontrol_new wm8988_monomux_controls =
+	SOC_DAPM_ENUM("Route", monomux);
+
+static const struct snd_soc_dapm_widget wm8988_dapm_widgets[] = {
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8988_PWR1, 1, 0),
+
+	SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_diffmux_controls),
+	SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_monomux_controls),
+	SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_monomux_controls),
+
+	SND_SOC_DAPM_MUX("Left PGA Mux", WM8988_PWR1, 5, 0,
+		&wm8988_left_pga_controls),
+	SND_SOC_DAPM_MUX("Right PGA Mux", WM8988_PWR1, 4, 0,
+		&wm8988_right_pga_controls),
+
+	SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_left_line_controls),
+	SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_right_line_controls),
+
+	SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8988_PWR1, 2, 0),
+	SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8988_PWR1, 3, 0),
+
+	SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8988_PWR2, 7, 0),
+	SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8988_PWR2, 8, 0),
+
+	SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8988_left_mixer_controls[0],
+		ARRAY_SIZE(wm8988_left_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8988_right_mixer_controls[0],
+		ARRAY_SIZE(wm8988_right_mixer_controls)),
+
+	SND_SOC_DAPM_PGA("Right Out 2", WM8988_PWR2, 3, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 2", WM8988_PWR2, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Out 1", WM8988_PWR2, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 1", WM8988_PWR2, 6, 0, NULL, 0),
+
+	SND_SOC_DAPM_POST("LRC control", wm8988_lrc_control),
+
+	SND_SOC_DAPM_OUTPUT("LOUT1"),
+	SND_SOC_DAPM_OUTPUT("ROUT1"),
+	SND_SOC_DAPM_OUTPUT("LOUT2"),
+	SND_SOC_DAPM_OUTPUT("ROUT2"),
+	SND_SOC_DAPM_OUTPUT("VREF"),
+
+	SND_SOC_DAPM_INPUT("LINPUT1"),
+	SND_SOC_DAPM_INPUT("LINPUT2"),
+	SND_SOC_DAPM_INPUT("RINPUT1"),
+	SND_SOC_DAPM_INPUT("RINPUT2"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	{ "Left Line Mux", "Line 1", "LINPUT1" },
+	{ "Left Line Mux", "Line 2", "LINPUT2" },
+	{ "Left Line Mux", "PGA", "Left PGA Mux" },
+	{ "Left Line Mux", "Differential", "Differential Mux" },
+
+	{ "Right Line Mux", "Line 1", "RINPUT1" },
+	{ "Right Line Mux", "Line 2", "RINPUT2" },
+	{ "Right Line Mux", "PGA", "Right PGA Mux" },
+	{ "Right Line Mux", "Differential", "Differential Mux" },
+
+	{ "Left PGA Mux", "Line 1", "LINPUT1" },
+	{ "Left PGA Mux", "Line 2", "LINPUT2" },
+	{ "Left PGA Mux", "Differential", "Differential Mux" },
+
+	{ "Right PGA Mux", "Line 1", "RINPUT1" },
+	{ "Right PGA Mux", "Line 2", "RINPUT2" },
+	{ "Right PGA Mux", "Differential", "Differential Mux" },
+
+	{ "Differential Mux", "Line 1", "LINPUT1" },
+	{ "Differential Mux", "Line 1", "RINPUT1" },
+	{ "Differential Mux", "Line 2", "LINPUT2" },
+	{ "Differential Mux", "Line 2", "RINPUT2" },
+
+	{ "Left ADC Mux", "Stereo", "Left PGA Mux" },
+	{ "Left ADC Mux", "Mono (Left)", "Left PGA Mux" },
+	{ "Left ADC Mux", "Digital Mono", "Left PGA Mux" },
+
+	{ "Right ADC Mux", "Stereo", "Right PGA Mux" },
+	{ "Right ADC Mux", "Mono (Right)", "Right PGA Mux" },
+	{ "Right ADC Mux", "Digital Mono", "Right PGA Mux" },
+
+	{ "Left ADC", NULL, "Left ADC Mux" },
+	{ "Right ADC", NULL, "Right ADC Mux" },
+
+	{ "Left Line Mux", "Line 1", "LINPUT1" },
+	{ "Left Line Mux", "Line 2", "LINPUT2" },
+	{ "Left Line Mux", "PGA", "Left PGA Mux" },
+	{ "Left Line Mux", "Differential", "Differential Mux" },
+
+	{ "Right Line Mux", "Line 1", "RINPUT1" },
+	{ "Right Line Mux", "Line 2", "RINPUT2" },
+	{ "Right Line Mux", "PGA", "Right PGA Mux" },
+	{ "Right Line Mux", "Differential", "Differential Mux" },
+
+	{ "Left Mixer", "Playback Switch", "Left DAC" },
+	{ "Left Mixer", "Left Bypass Switch", "Left Line Mux" },
+	{ "Left Mixer", "Right Playback Switch", "Right DAC" },
+	{ "Left Mixer", "Right Bypass Switch", "Right Line Mux" },
+
+	{ "Right Mixer", "Left Playback Switch", "Left DAC" },
+	{ "Right Mixer", "Left Bypass Switch", "Left Line Mux" },
+	{ "Right Mixer", "Playback Switch", "Right DAC" },
+	{ "Right Mixer", "Right Bypass Switch", "Right Line Mux" },
+
+	{ "Left Out 1", NULL, "Left Mixer" },
+	{ "LOUT1", NULL, "Left Out 1" },
+	{ "Right Out 1", NULL, "Right Mixer" },
+	{ "ROUT1", NULL, "Right Out 1" },
+
+	{ "Left Out 2", NULL, "Left Mixer" },
+	{ "LOUT2", NULL, "Left Out 2" },
+	{ "Right Out 2", NULL, "Right Mixer" },
+	{ "ROUT2", NULL, "Right Out 2" },
+};
+
+struct _coeff_div {
+	u32 mclk;
+	u32 rate;
+	u16 fs;
+	u8 sr:5;
+	u8 usb:1;
+};
+
+/* codec hifi mclk clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+	/* 8k */
+	{12288000, 8000, 1536, 0x6, 0x0},
+	{11289600, 8000, 1408, 0x16, 0x0},
+	{18432000, 8000, 2304, 0x7, 0x0},
+	{16934400, 8000, 2112, 0x17, 0x0},
+	{12000000, 8000, 1500, 0x6, 0x1},
+
+	/* 11.025k */
+	{11289600, 11025, 1024, 0x18, 0x0},
+	{16934400, 11025, 1536, 0x19, 0x0},
+	{12000000, 11025, 1088, 0x19, 0x1},
+
+	/* 16k */
+	{12288000, 16000, 768, 0xa, 0x0},
+	{18432000, 16000, 1152, 0xb, 0x0},
+	{12000000, 16000, 750, 0xa, 0x1},
+
+	/* 22.05k */
+	{11289600, 22050, 512, 0x1a, 0x0},
+	{16934400, 22050, 768, 0x1b, 0x0},
+	{12000000, 22050, 544, 0x1b, 0x1},
+
+	/* 32k */
+	{12288000, 32000, 384, 0xc, 0x0},
+	{18432000, 32000, 576, 0xd, 0x0},
+	{12000000, 32000, 375, 0xa, 0x1},
+
+	/* 44.1k */
+	{11289600, 44100, 256, 0x10, 0x0},
+	{16934400, 44100, 384, 0x11, 0x0},
+	{12000000, 44100, 272, 0x11, 0x1},
+
+	/* 48k */
+	{12288000, 48000, 256, 0x0, 0x0},
+	{18432000, 48000, 384, 0x1, 0x0},
+	{12000000, 48000, 250, 0x0, 0x1},
+
+	/* 88.2k */
+	{11289600, 88200, 128, 0x1e, 0x0},
+	{16934400, 88200, 192, 0x1f, 0x0},
+	{12000000, 88200, 136, 0x1f, 0x1},
+
+	/* 96k */
+	{12288000, 96000, 128, 0xe, 0x0},
+	{18432000, 96000, 192, 0xf, 0x0},
+	{12000000, 96000, 125, 0xe, 0x1},
+};
+
+static inline int get_coeff(int mclk, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+		if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/* The set of rates we can generate from the above for each SYSCLK */
+
+static unsigned int rates_12288[] = {
+	8000, 12000, 16000, 24000, 24000, 32000, 48000, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12288 = {
+	.count	= ARRAY_SIZE(rates_12288),
+	.list	= rates_12288,
+};
+
+static unsigned int rates_112896[] = {
+	8000, 11025, 22050, 44100,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_112896 = {
+	.count	= ARRAY_SIZE(rates_112896),
+	.list	= rates_112896,
+};
+
+static unsigned int rates_12[] = {
+	8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000,
+	48000, 88235, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12 = {
+	.count	= ARRAY_SIZE(rates_12),
+	.list	= rates_12,
+};
+
+/*
+ * Note that this should be called from init rather than from hw_params.
+ */
+static int wm8988_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 18432000:
+	case 22579200:
+	case 36864000:
+		wm8988->sysclk_constraints = &constraints_112896;
+		wm8988->sysclk = freq;
+		return 0;
+
+	case 12288000:
+	case 16934400:
+	case 24576000:
+	case 33868800:
+		wm8988->sysclk_constraints = &constraints_12288;
+		wm8988->sysclk = freq;
+		return 0;
+
+	case 12000000:
+	case 24000000:
+		wm8988->sysclk_constraints = &constraints_12;
+		wm8988->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8988_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface = 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8988_write(codec, WM8988_IFACE, iface);
+	return 0;
+}
+
+static int wm8988_pcm_startup(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+
+	/* The set of sample rates that can be supported depends on the
+	 * MCLK supplied to the CODEC - enforce this.
+	 */
+	if (!wm8988->sysclk) {
+		dev_err(codec->dev,
+			"No MCLK configured, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_RATE,
+				   wm8988->sysclk_constraints);
+
+	return 0;
+}
+
+static int wm8988_pcm_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+	u16 iface = wm8988_read_reg_cache(codec, WM8988_IFACE) & 0x1f3;
+	u16 srate = wm8988_read_reg_cache(codec, WM8988_SRATE) & 0x180;
+	int coeff;
+
+	coeff = get_coeff(wm8988->sysclk, params_rate(params));
+	if (coeff < 0) {
+		coeff = get_coeff(wm8988->sysclk / 2, params_rate(params));
+		srate |= 0x40;
+	}
+	if (coeff < 0) {
+		dev_err(codec->dev,
+			"Unable to configure sample rate %dHz with %dHz MCLK\n",
+			params_rate(params), wm8988->sysclk);
+		return coeff;
+	}
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= 0x000c;
+		break;
+	}
+
+	/* set iface & srate */
+	wm8988_write(codec, WM8988_IFACE, iface);
+	if (coeff >= 0)
+		wm8988_write(codec, WM8988_SRATE, srate |
+			(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
+
+	return 0;
+}
+
+static int wm8988_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8988_read_reg_cache(codec, WM8988_ADCDAC) & 0xfff7;
+
+	if (mute)
+		wm8988_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
+	else
+		wm8988_write(codec, WM8988_ADCDAC, mute_reg);
+	return 0;
+}
+
+static int wm8988_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 pwr_reg = wm8988_read_reg_cache(codec, WM8988_PWR1) & ~0x1c1;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VREF, VMID=2x50k, digital enabled */
+		wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* VREF, VMID=2x5k */
+			wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
+
+			/* Charge caps */
+			msleep(100);
+		}
+
+		/* VREF, VMID=2*500k, digital stopped */
+		wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		wm8988_write(codec, WM8988_PWR1, 0x0000);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8988_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8988_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8988_ops = {
+	.startup = wm8988_pcm_startup,
+	.hw_params = wm8988_pcm_hw_params,
+	.set_fmt = wm8988_set_dai_fmt,
+	.set_sysclk = wm8988_set_dai_sysclk,
+	.digital_mute = wm8988_mute,
+};
+
+struct snd_soc_dai wm8988_dai = {
+	.name = "WM8988",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8988_RATES,
+		.formats = WM8988_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8988_RATES,
+		.formats = WM8988_FORMATS,
+	 },
+	.ops = &wm8988_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8988_dai);
+
+static int wm8988_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8988_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8988_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < WM8988_NUM_REG; i++) {
+		if (i == WM8988_RESET)
+			continue;
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+
+static struct snd_soc_codec *wm8988_codec;
+
+static int wm8988_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8988_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8988_codec;
+	codec = wm8988_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8988_snd_controls,
+				ARRAY_SIZE(wm8988_snd_controls));
+	snd_soc_dapm_new_controls(codec, wm8988_dapm_widgets,
+				  ARRAY_SIZE(wm8988_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm8988_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8988 = {
+	.probe = 	wm8988_probe,
+	.remove = 	wm8988_remove,
+	.suspend = 	wm8988_suspend,
+	.resume =	wm8988_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988);
+
+static int wm8988_register(struct wm8988_priv *wm8988)
+{
+	struct snd_soc_codec *codec = &wm8988->codec;
+	int ret;
+	u16 reg;
+
+	if (wm8988_codec) {
+		dev_err(codec->dev, "Another WM8988 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8988;
+	codec->name = "WM8988";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8988_read_reg_cache;
+	codec->write = wm8988_write;
+	codec->dai = &wm8988_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache);
+	codec->reg_cache = &wm8988->reg_cache;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8988_set_bias_level;
+
+	memcpy(codec->reg_cache, wm8988_reg,
+	       sizeof(wm8988_reg));
+
+	ret = wm8988_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	/* set the update bits (we always update left then right) */
+	reg = wm8988_read_reg_cache(codec, WM8988_RADC);
+	wm8988_write(codec, WM8988_RADC, reg | 0x100);
+	reg = wm8988_read_reg_cache(codec, WM8988_RDAC);
+	wm8988_write(codec, WM8988_RDAC, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_ROUT1V);
+	wm8988_write(codec, WM8988_ROUT1V, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_ROUT2V);
+	wm8988_write(codec, WM8988_ROUT2V, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_RINVOL);
+	wm8988_write(codec, WM8988_RINVOL, reg | 0x0100);
+
+	wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY);
+
+	wm8988_dai.dev = codec->dev;
+
+	wm8988_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8988_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err:
+	kfree(wm8988);
+	return ret;
+}
+
+static void wm8988_unregister(struct wm8988_priv *wm8988)
+{
+	wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8988_dai);
+	snd_soc_unregister_codec(&wm8988->codec);
+	kfree(wm8988);
+	wm8988_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static int wm8988_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8988_priv *wm8988;
+	struct snd_soc_codec *codec;
+
+	wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
+	if (wm8988 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8988->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8988);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8988_register(wm8988);
+}
+
+static int wm8988_i2c_remove(struct i2c_client *client)
+{
+	struct wm8988_priv *wm8988 = i2c_get_clientdata(client);
+	wm8988_unregister(wm8988);
+	return 0;
+}
+
+static const struct i2c_device_id wm8988_i2c_id[] = {
+	{ "wm8988", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8988_i2c_id);
+
+static struct i2c_driver wm8988_i2c_driver = {
+	.driver = {
+		.name = "WM8988",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm8988_i2c_probe,
+	.remove = wm8988_i2c_remove,
+	.id_table = wm8988_i2c_id,
+};
+#endif
+
+#if defined(CONFIG_SPI_MASTER)
+static int wm8988_spi_write(struct spi_device *spi, const char *data, int len)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	u8 msg[2];
+
+	if (len <= 0)
+		return 0;
+
+	msg[0] = data[0];
+	msg[1] = data[1];
+
+	spi_message_init(&m);
+	memset(&t, 0, (sizeof t));
+
+	t.tx_buf = &msg[0];
+	t.len = len;
+
+	spi_message_add_tail(&t, &m);
+	spi_sync(spi, &m);
+
+	return len;
+}
+
+static int __devinit wm8988_spi_probe(struct spi_device *spi)
+{
+	struct wm8988_priv *wm8988;
+	struct snd_soc_codec *codec;
+
+	wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
+	if (wm8988 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8988->codec;
+	codec->hw_write = (hw_write_t)wm8988_spi_write;
+	codec->control_data = spi;
+	codec->dev = &spi->dev;
+
+	spi->dev.driver_data = wm8988;
+
+	return wm8988_register(wm8988);
+}
+
+static int __devexit wm8988_spi_remove(struct spi_device *spi)
+{
+	struct wm8988_priv *wm8988 = spi->dev.driver_data;
+
+	wm8988_unregister(wm8988);
+
+	return 0;
+}
+
+static struct spi_driver wm8988_spi_driver = {
+	.driver = {
+		.name	= "wm8988",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm8988_spi_probe,
+	.remove		= __devexit_p(wm8988_spi_remove),
+};
+#endif
+
+static int __init wm8988_modinit(void)
+{
+	int ret;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8988_i2c_driver);
+	if (ret != 0)
+		pr_err("WM8988: Unable to register I2C driver: %d\n", ret);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	ret = spi_register_driver(&wm8988_spi_driver);
+	if (ret != 0)
+		pr_err("WM8988: Unable to register SPI driver: %d\n", ret);
+#endif
+	return ret;
+}
+module_init(wm8988_modinit);
+
+static void __exit wm8988_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8988_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8988_spi_driver);
+#endif
+}
+module_exit(wm8988_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8988 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8988.h b/sound/soc/codecs/wm8988.h
new file mode 100644
index 00000000000..4552d37fdd4
--- /dev/null
+++ b/sound/soc/codecs/wm8988.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <richard@openedhand.com>
+ *
+ * Based on WM8753.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _WM8988_H
+#define _WM8988_H
+
+/* WM8988 register space */
+
+#define WM8988_LINVOL    0x00
+#define WM8988_RINVOL    0x01
+#define WM8988_LOUT1V    0x02
+#define WM8988_ROUT1V    0x03
+#define WM8988_ADCDAC    0x05
+#define WM8988_IFACE     0x07
+#define WM8988_SRATE     0x08
+#define WM8988_LDAC      0x0a
+#define WM8988_RDAC      0x0b
+#define WM8988_BASS      0x0c
+#define WM8988_TREBLE    0x0d
+#define WM8988_RESET     0x0f
+#define WM8988_3D        0x10
+#define WM8988_ALC1      0x11
+#define WM8988_ALC2      0x12
+#define WM8988_ALC3      0x13
+#define WM8988_NGATE     0x14
+#define WM8988_LADC      0x15
+#define WM8988_RADC      0x16
+#define WM8988_ADCTL1    0x17
+#define WM8988_ADCTL2    0x18
+#define WM8988_PWR1      0x19
+#define WM8988_PWR2      0x1a
+#define WM8988_ADCTL3    0x1b
+#define WM8988_ADCIN     0x1f
+#define WM8988_LADCIN    0x20
+#define WM8988_RADCIN    0x21
+#define WM8988_LOUTM1    0x22
+#define WM8988_LOUTM2    0x23
+#define WM8988_ROUTM1    0x24
+#define WM8988_ROUTM2    0x25
+#define WM8988_LOUT2V    0x28
+#define WM8988_ROUT2V    0x29
+#define WM8988_LPPB      0x43
+#define WM8988_NUM_REG   0x44
+
+#define WM8988_SYSCLK	0
+
+extern struct snd_soc_dai wm8988_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8988;
+
+#endif
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 40cd274eb1e..d029818350e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -998,7 +998,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target,
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-		"WM8990 N value outwith recommended range! N = %d\n", Ndiv);
+		"WM8990 N value outwith recommended range! N = %u\n", Ndiv);
 
 	pll_div->n = Ndiv;
 	Nmod = target % source;
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
new file mode 100644
index 00000000000..86fc57e25f9
--- /dev/null
+++ b/sound/soc/codecs/wm9081.c
@@ -0,0 +1,1534 @@
+/*
+ * wm9081.c  --  WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/wm9081.h>
+#include "wm9081.h"
+
+static u16 wm9081_reg_defaults[] = {
+	0x0000,     /* R0  - Software Reset */
+	0x0000,     /* R1 */
+	0x00B9,     /* R2  - Analogue Lineout */
+	0x00B9,     /* R3  - Analogue Speaker PGA */
+	0x0001,     /* R4  - VMID Control */
+	0x0068,     /* R5  - Bias Control 1 */
+	0x0000,     /* R6 */
+	0x0000,     /* R7  - Analogue Mixer */
+	0x0000,     /* R8  - Anti Pop Control */
+	0x01DB,     /* R9  - Analogue Speaker 1 */
+	0x0018,     /* R10 - Analogue Speaker 2 */
+	0x0180,     /* R11 - Power Management */
+	0x0000,     /* R12 - Clock Control 1 */
+	0x0038,     /* R13 - Clock Control 2 */
+	0x4000,     /* R14 - Clock Control 3 */
+	0x0000,     /* R15 */
+	0x0000,     /* R16 - FLL Control 1 */
+	0x0200,     /* R17 - FLL Control 2 */
+	0x0000,     /* R18 - FLL Control 3 */
+	0x0204,     /* R19 - FLL Control 4 */
+	0x0000,     /* R20 - FLL Control 5 */
+	0x0000,     /* R21 */
+	0x0000,     /* R22 - Audio Interface 1 */
+	0x0002,     /* R23 - Audio Interface 2 */
+	0x0008,     /* R24 - Audio Interface 3 */
+	0x0022,     /* R25 - Audio Interface 4 */
+	0x0000,     /* R26 - Interrupt Status */
+	0x0006,     /* R27 - Interrupt Status Mask */
+	0x0000,     /* R28 - Interrupt Polarity */
+	0x0000,     /* R29 - Interrupt Control */
+	0x00C0,     /* R30 - DAC Digital 1 */
+	0x0008,     /* R31 - DAC Digital 2 */
+	0x09AF,     /* R32 - DRC 1 */
+	0x4201,     /* R33 - DRC 2 */
+	0x0000,     /* R34 - DRC 3 */
+	0x0000,     /* R35 - DRC 4 */
+	0x0000,     /* R36 */
+	0x0000,     /* R37 */
+	0x0000,     /* R38 - Write Sequencer 1 */
+	0x0000,     /* R39 - Write Sequencer 2 */
+	0x0002,     /* R40 - MW Slave 1 */
+	0x0000,     /* R41 */
+	0x0000,     /* R42 - EQ 1 */
+	0x0000,     /* R43 - EQ 2 */
+	0x0FCA,     /* R44 - EQ 3 */
+	0x0400,     /* R45 - EQ 4 */
+	0x00B8,     /* R46 - EQ 5 */
+	0x1EB5,     /* R47 - EQ 6 */
+	0xF145,     /* R48 - EQ 7 */
+	0x0B75,     /* R49 - EQ 8 */
+	0x01C5,     /* R50 - EQ 9 */
+	0x169E,     /* R51 - EQ 10 */
+	0xF829,     /* R52 - EQ 11 */
+	0x07AD,     /* R53 - EQ 12 */
+	0x1103,     /* R54 - EQ 13 */
+	0x1C58,     /* R55 - EQ 14 */
+	0xF373,     /* R56 - EQ 15 */
+	0x0A54,     /* R57 - EQ 16 */
+	0x0558,     /* R58 - EQ 17 */
+	0x0564,     /* R59 - EQ 18 */
+	0x0559,     /* R60 - EQ 19 */
+	0x4000,     /* R61 - EQ 20 */
+};
+
+static struct {
+	int ratio;
+	int clk_sys_rate;
+} clk_sys_rates[] = {
+	{ 64,   0 },
+	{ 128,  1 },
+	{ 192,  2 },
+	{ 256,  3 },
+	{ 384,  4 },
+	{ 512,  5 },
+	{ 768,  6 },
+	{ 1024, 7 },
+	{ 1408, 8 },
+	{ 1536, 9 },
+};
+
+static struct {
+	int rate;
+	int sample_rate;
+} sample_rates[] = {
+	{ 8000,  0  },
+	{ 11025, 1  },
+	{ 12000, 2  },
+	{ 16000, 3  },
+	{ 22050, 4  },
+	{ 24000, 5  },
+	{ 32000, 6  },
+	{ 44100, 7  },
+	{ 48000, 8  },
+	{ 88200, 9  },
+	{ 96000, 10 },
+};
+
+static struct {
+	int div; /* *10 due to .5s */
+	int bclk_div;
+} bclk_divs[] = {
+	{ 10,  0  },
+	{ 15,  1  },
+	{ 20,  2  },
+	{ 30,  3  },
+	{ 40,  4  },
+	{ 50,  5  },
+	{ 55,  6  },
+	{ 60,  7  },
+	{ 80,  8  },
+	{ 100, 9  },
+	{ 110, 10 },
+	{ 120, 11 },
+	{ 160, 12 },
+	{ 200, 13 },
+	{ 220, 14 },
+	{ 240, 15 },
+	{ 250, 16 },
+	{ 300, 17 },
+	{ 320, 18 },
+	{ 440, 19 },
+	{ 480, 20 },
+};
+
+struct wm9081_priv {
+	struct snd_soc_codec codec;
+	u16 reg_cache[WM9081_MAX_REGISTER + 1];
+	int sysclk_source;
+	int mclk_rate;
+	int sysclk_rate;
+	int fs;
+	int bclk;
+	int master;
+	int fll_fref;
+	int fll_fout;
+	struct wm9081_retune_mobile_config *retune;
+};
+
+static int wm9081_reg_is_volatile(int reg)
+{
+	switch (reg) {
+	default:
+		return 0;
+	}
+}
+
+static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec,
+					  unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+	return cache[reg];
+}
+
+static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg)
+{
+	struct i2c_msg xfer[2];
+	u16 data;
+	int ret;
+	struct i2c_client *client = codec->control_data;
+
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 1;
+	xfer[0].buf = &reg;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = 2;
+	xfer[1].buf = (u8 *)&data;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret != 2) {
+		dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+		return 0;
+	}
+
+	return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg)
+{
+	if (wm9081_reg_is_volatile(reg))
+		return wm9081_read_hw(codec, reg);
+	else
+		return wm9081_read_reg_cache(codec, reg);
+}
+
+static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	u8 data[3];
+
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+
+	if (!wm9081_reg_is_volatile(reg))
+		cache[reg] = value;
+
+	data[0] = reg;
+	data[1] = value >> 8;
+	data[2] = value & 0x00ff;
+
+	if (codec->hw_write(codec->control_data, data, 3) == 3)
+		return 0;
+	else
+		return -EIO;
+}
+
+static int wm9081_reset(struct snd_soc_codec *codec)
+{
+	return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static unsigned int drc_max_tlv[] = {
+	TLV_DB_RANGE_HEAD(4),
+	0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
+	1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
+	2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
+	3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
+
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+
+static const char *drc_high_text[] = {
+	"1",
+	"1/2",
+	"1/4",
+	"1/8",
+	"1/16",
+	"0",
+};
+
+static const struct soc_enum drc_high =
+	SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text);
+
+static const char *drc_low_text[] = {
+	"1",
+	"1/2",
+	"1/4",
+	"1/8",
+	"0",
+};
+
+static const struct soc_enum drc_low =
+	SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text);
+
+static const char *drc_atk_text[] = {
+	"181us",
+	"181us",
+	"363us",
+	"726us",
+	"1.45ms",
+	"2.9ms",
+	"5.8ms",
+	"11.6ms",
+	"23.2ms",
+	"46.4ms",
+	"92.8ms",
+	"185.6ms",
+};
+
+static const struct soc_enum drc_atk =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text);
+
+static const char *drc_dcy_text[] = {
+	"186ms",
+	"372ms",
+	"743ms",
+	"1.49s",
+	"2.97s",
+	"5.94s",
+	"11.89s",
+	"23.78s",
+	"47.56s",
+};
+
+static const struct soc_enum drc_dcy =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text);
+
+static const char *drc_qr_dcy_text[] = {
+	"0.725ms",
+	"1.45ms",
+	"5.8ms",
+};
+
+static const struct soc_enum drc_qr_dcy =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text);
+
+static const char *dac_deemph_text[] = {
+	"None",
+	"32kHz",
+	"44.1kHz",
+	"48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+	SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text);
+
+static const char *speaker_mode_text[] = {
+	"Class D",
+	"Class AB",
+};
+
+static const struct soc_enum speaker_mode =
+	SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text);
+
+static int speaker_mode_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int reg;
+
+	reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+	if (reg & WM9081_SPK_MODE)
+		ucontrol->value.integer.value[0] = 1;
+	else
+		ucontrol->value.integer.value[0] = 0;
+
+	return 0;
+}
+
+/*
+ * Stop any attempts to change speaker mode while the speaker is enabled.
+ *
+ * We also have some special anti-pop controls dependant on speaker
+ * mode which must be changed along with the mode.
+ */
+static int speaker_mode_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+	unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+
+	/* Are we changing anything? */
+	if (ucontrol->value.integer.value[0] ==
+	    ((reg2 & WM9081_SPK_MODE) != 0))
+		return 0;
+
+	/* Don't try to change modes while enabled */
+	if (reg_pwr & WM9081_SPK_ENA)
+		return -EINVAL;
+
+	if (ucontrol->value.integer.value[0]) {
+		/* Class AB */
+		reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
+		reg2 |= WM9081_SPK_MODE;
+	} else {
+		/* Class D */
+		reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
+		reg2 &= ~WM9081_SPK_MODE;
+	}
+
+	wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new wm9081_snd_controls[] = {
+SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
+SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
+
+SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
+
+SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
+SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
+SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
+
+SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
+SOC_ENUM("DRC High Slope", drc_high),
+SOC_ENUM("DRC Low Slope", drc_low),
+SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
+SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
+SOC_ENUM("DRC Attack", drc_atk),
+SOC_ENUM("DRC Decay", drc_dcy),
+SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
+SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
+
+SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
+SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
+SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
+	       out_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
+};
+
+static const struct snd_kcontrol_new wm9081_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
+};
+
+static const struct snd_kcontrol_new mixer[] = {
+SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
+SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
+};
+
+static int speaker_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		reg |= WM9081_SPK_ENA;
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		reg &= ~WM9081_SPK_ENA;
+		break;
+	}
+
+	wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg);
+
+	return 0;
+}
+
+struct _fll_div {
+	u16 fll_fratio;
+	u16 fll_outdiv;
+	u16 fll_clk_ref_div;
+	u16 n;
+	u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+	unsigned int min;
+	unsigned int max;
+	u16 fll_fratio;
+	int ratio;
+} fll_fratios[] = {
+	{       0,    64000, 4, 16 },
+	{   64000,   128000, 3,  8 },
+	{  128000,   256000, 2,  4 },
+	{  256000,  1000000, 1,  2 },
+	{ 1000000, 13500000, 0,  1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+		       unsigned int Fout)
+{
+	u64 Kpart;
+	unsigned int K, Ndiv, Nmod, target;
+	unsigned int div;
+	int i;
+
+	/* Fref must be <=13.5MHz */
+	div = 1;
+	while ((Fref / div) > 13500000) {
+		div *= 2;
+
+		if (div > 8) {
+			pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+			       Fref);
+			return -EINVAL;
+		}
+	}
+	fll_div->fll_clk_ref_div = div / 2;
+
+	pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+	/* Apply the division for our remaining calculations */
+	Fref /= div;
+
+	/* Fvco should be 90-100MHz; don't check the upper bound */
+	div = 0;
+	target = Fout * 2;
+	while (target < 90000000) {
+		div++;
+		target *= 2;
+		if (div > 7) {
+			pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+			       Fout);
+			return -EINVAL;
+		}
+	}
+	fll_div->fll_outdiv = div;
+
+	pr_debug("Fvco=%dHz\n", target);
+
+	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+			target /= fll_fratios[i].ratio;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(fll_fratios)) {
+		pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+		return -EINVAL;
+	}
+
+	/* Now, calculate N.K */
+	Ndiv = target / Fref;
+
+	fll_div->n = Ndiv;
+	Nmod = target % Fref;
+	pr_debug("Nmod=%d\n", Nmod);
+
+	/* Calculate fractional part - scale up so we can round. */
+	Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, Fref);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	fll_div->k = K / 10;
+
+	pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+		 fll_div->n, fll_div->k,
+		 fll_div->fll_fratio, fll_div->fll_outdiv,
+		 fll_div->fll_clk_ref_div);
+
+	return 0;
+}
+
+static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id,
+			  unsigned int Fref, unsigned int Fout)
+{
+	struct wm9081_priv *wm9081 = codec->private_data;
+	u16 reg1, reg4, reg5;
+	struct _fll_div fll_div;
+	int ret;
+	int clk_sys_reg;
+
+	/* Any change? */
+	if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
+		return 0;
+
+	/* Disable the FLL */
+	if (Fout == 0) {
+		dev_dbg(codec->dev, "FLL disabled\n");
+		wm9081->fll_fref = 0;
+		wm9081->fll_fout = 0;
+
+		return 0;
+	}
+
+	ret = fll_factors(&fll_div, Fref, Fout);
+	if (ret != 0)
+		return ret;
+
+	reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5);
+	reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
+
+	switch (fll_id) {
+	case WM9081_SYSCLK_FLL_MCLK:
+		reg5 |= 0x1;
+		break;
+
+	default:
+		dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+		return -EINVAL;
+	}
+
+	/* Disable CLK_SYS while we reconfigure */
+	clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+	if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+		wm9081_write(codec, WM9081_CLOCK_CONTROL_3,
+			     clk_sys_reg & ~WM9081_CLK_SYS_ENA);
+
+	/* Any FLL configuration change requires that the FLL be
+	 * disabled first. */
+	reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1);
+	reg1 &= ~WM9081_FLL_ENA;
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+
+	/* Apply the configuration */
+	if (fll_div.k)
+		reg1 |= WM9081_FLL_FRAC_MASK;
+	else
+		reg1 &= ~WM9081_FLL_FRAC_MASK;
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+
+	wm9081_write(codec, WM9081_FLL_CONTROL_2,
+		     (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
+		     (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
+	wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
+
+	reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4);
+	reg4 &= ~WM9081_FLL_N_MASK;
+	reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
+	wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4);
+
+	reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
+	reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
+	wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5);
+
+	/* Enable the FLL */
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
+
+	/* Then bring CLK_SYS up again if it was disabled */
+	if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+		wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
+
+	dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+	wm9081->fll_fref = Fref;
+	wm9081->fll_fout = Fout;
+
+	return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+	struct wm9081_priv *wm9081 = codec->private_data;
+	int new_sysclk, i, target;
+	unsigned int reg;
+	int ret = 0;
+	int mclkdiv = 0;
+	int fll = 0;
+
+	switch (wm9081->sysclk_source) {
+	case WM9081_SYSCLK_MCLK:
+		if (wm9081->mclk_rate > 12225000) {
+			mclkdiv = 1;
+			wm9081->sysclk_rate = wm9081->mclk_rate / 2;
+		} else {
+			wm9081->sysclk_rate = wm9081->mclk_rate;
+		}
+		wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0);
+		break;
+
+	case WM9081_SYSCLK_FLL_MCLK:
+		/* If we have a sample rate calculate a CLK_SYS that
+		 * gives us a suitable DAC configuration, plus BCLK.
+		 * Ideally we would check to see if we can clock
+		 * directly from MCLK and only use the FLL if this is
+		 * not the case, though care must be taken with free
+		 * running mode.
+		 */
+		if (wm9081->master && wm9081->bclk) {
+			/* Make sure we can generate CLK_SYS and BCLK
+			 * and that we've got 3MHz for optimal
+			 * performance. */
+			for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+				target = wm9081->fs * clk_sys_rates[i].ratio;
+				new_sysclk = target;
+				if (target >= wm9081->bclk &&
+				    target > 3000000)
+					break;
+			}
+		} else if (wm9081->fs) {
+			for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+				new_sysclk = clk_sys_rates[i].ratio
+					* wm9081->fs;
+				if (new_sysclk > 3000000)
+					break;
+			}
+		} else {
+			new_sysclk = 12288000;
+		}
+
+		ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK,
+				     wm9081->mclk_rate, new_sysclk);
+		if (ret == 0) {
+			wm9081->sysclk_rate = new_sysclk;
+
+			/* Switch SYSCLK over to FLL */
+			fll = 1;
+		} else {
+			wm9081->sysclk_rate = wm9081->mclk_rate;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1);
+	if (mclkdiv)
+		reg |= WM9081_MCLKDIV2;
+	else
+		reg &= ~WM9081_MCLKDIV2;
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg);
+
+	reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+	if (fll)
+		reg |= WM9081_CLK_SRC_SEL;
+	else
+		reg &= ~WM9081_CLK_SRC_SEL;
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg);
+
+	dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
+
+	return ret;
+}
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+
+	/* This should be done on init() for bypass paths */
+	switch (wm9081->sysclk_source) {
+	case WM9081_SYSCLK_MCLK:
+		dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
+		break;
+	case WM9081_SYSCLK_FLL_MCLK:
+		dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n",
+			wm9081->mclk_rate);
+		break;
+	default:
+		dev_err(codec->dev, "System clock not configured\n");
+		return -EINVAL;
+	}
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		configure_clock(codec);
+		break;
+
+	case SND_SOC_DAPM_POST_PMD:
+		/* Disable the FLL if it's running */
+		wm9081_set_fll(codec, 0, 0, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1"),
+SND_SOC_DAPM_INPUT("IN2"),
+
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0),
+
+SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
+			     mixer, ARRAY_SIZE(mixer)),
+
+SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0,
+		   speaker_event,
+		   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_OUTPUT("LINEOUT"),
+SND_SOC_DAPM_OUTPUT("SPKN"),
+SND_SOC_DAPM_OUTPUT("SPKP"),
+
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
+};
+
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+	{ "DAC", NULL, "CLK_SYS" },
+	{ "DAC", NULL, "CLK_DSP" },
+
+	{ "Mixer", "IN1 Switch", "IN1" },
+	{ "Mixer", "IN2 Switch", "IN2" },
+	{ "Mixer", "Playback Switch", "DAC" },
+
+	{ "LINEOUT PGA", NULL, "Mixer" },
+	{ "LINEOUT PGA", NULL, "TOCLK" },
+	{ "LINEOUT PGA", NULL, "CLK_SYS" },
+
+	{ "LINEOUT", NULL, "LINEOUT PGA" },
+
+	{ "Speaker PGA", NULL, "Mixer" },
+	{ "Speaker PGA", NULL, "TOCLK" },
+	{ "Speaker PGA", NULL, "CLK_SYS" },
+
+	{ "SPKN", NULL, "Speaker PGA" },
+	{ "SPKP", NULL, "Speaker PGA" },
+};
+
+static int wm9081_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VMID=2*40k */
+		reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+		reg &= ~WM9081_VMID_SEL_MASK;
+		reg |= 0x2;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Normal bias current */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg &= ~WM9081_STBY_BIAS_ENA;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		/* Initial cold start */
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* Disable LINEOUT discharge */
+			reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+			reg &= ~WM9081_LINEOUT_DISCH;
+			wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+
+			/* Select startup bias source */
+			reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+			reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
+			wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+
+			/* VMID 2*4k; Soft VMID ramp enable */
+			reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+			reg |= WM9081_VMID_RAMP | 0x6;
+			wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+			mdelay(100);
+
+			/* Normal bias enable & soft start off */
+			reg |= WM9081_BIAS_ENA;
+			reg &= ~WM9081_VMID_RAMP;
+			wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+			/* Standard bias source */
+			reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+			reg &= ~WM9081_BIAS_SRC;
+			wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		}
+
+		/* VMID 2*240k */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg &= ~WM9081_VMID_SEL_MASK;
+		reg |= 0x40;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Standby bias current on */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg |= WM9081_STBY_BIAS_ENA;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Startup bias source */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg |= WM9081_BIAS_SRC;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+
+		/* Disable VMID and biases with soft ramping */
+		reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+		reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
+		reg |= WM9081_VMID_RAMP;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Actively discharge LINEOUT */
+		reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+		reg |= WM9081_LINEOUT_DISCH;
+		wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+	unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+
+	aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
+		  WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		wm9081->master = 0;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		aif2 |= WM9081_LRCLK_DIR;
+		wm9081->master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		aif2 |= WM9081_BCLK_DIR;
+		wm9081->master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
+		wm9081->master = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_B:
+		aif2 |= WM9081_AIF_LRCLK_INV;
+	case SND_SOC_DAIFMT_DSP_A:
+		aif2 |= 0x3;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif2 |= 0x2;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif2 |= 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif2 |= WM9081_AIF_BCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif2 |= WM9081_AIF_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif2 |= WM9081_AIF_LRCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+
+	return 0;
+}
+
+static int wm9081_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+	int ret, i, best, best_val, cur_val;
+	unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
+
+	clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2);
+	clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
+
+	aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+
+	aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+	aif2 &= ~WM9081_AIF_WL_MASK;
+
+	aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3);
+	aif3 &= ~WM9081_BCLK_DIV_MASK;
+
+	aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4);
+	aif4 &= ~WM9081_LRCLK_RATE_MASK;
+
+	/* What BCLK do we need? */
+	wm9081->fs = params_rate(params);
+	wm9081->bclk = 2 * wm9081->fs;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		wm9081->bclk *= 16;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		wm9081->bclk *= 20;
+		aif2 |= 0x4;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		wm9081->bclk *= 24;
+		aif2 |= 0x8;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		wm9081->bclk *= 32;
+		aif2 |= 0xc;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) {
+		int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
+			     WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
+		wm9081->bclk *= slots;
+	}
+
+	dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
+
+	ret = configure_clock(codec);
+	if (ret != 0)
+		return ret;
+
+	/* Select nearest CLK_SYS_RATE */
+	best = 0;
+	best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
+		       - wm9081->fs);
+	for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+		cur_val = abs((wm9081->sysclk_rate /
+			       clk_sys_rates[i].ratio) - wm9081->fs);;
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+		clk_sys_rates[best].ratio);
+	clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
+		      << WM9081_CLK_SYS_RATE_SHIFT);
+
+	/* SAMPLE_RATE */
+	best = 0;
+	best_val = abs(wm9081->fs - sample_rates[0].rate);
+	for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+		/* Closest match */
+		cur_val = abs(wm9081->fs - sample_rates[i].rate);
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+		sample_rates[best].rate);
+	clk_ctrl2 |= (sample_rates[best].sample_rate
+			<< WM9081_SAMPLE_RATE_SHIFT);
+
+	/* BCLK_DIV */
+	best = 0;
+	best_val = INT_MAX;
+	for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+		cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
+			- wm9081->bclk;
+		if (cur_val < 0) /* Table is sorted */
+			break;
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
+	dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+		bclk_divs[best].div, wm9081->bclk);
+	aif3 |= bclk_divs[best].bclk_div;
+
+	/* LRCLK is a simple fraction of BCLK */
+	dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
+	aif4 |= wm9081->bclk / wm9081->fs;
+
+	/* Apply a ReTune Mobile configuration if it's in use */
+	if (wm9081->retune) {
+		struct wm9081_retune_mobile_config *retune = wm9081->retune;
+		struct wm9081_retune_mobile_setting *s;
+		int eq1;
+
+		best = 0;
+		best_val = abs(retune->configs[0].rate - wm9081->fs);
+		for (i = 0; i < retune->num_configs; i++) {
+			cur_val = abs(retune->configs[i].rate - wm9081->fs);
+			if (cur_val < best_val) {
+				best_val = cur_val;
+				best = i;
+			}
+		}
+		s = &retune->configs[best];
+
+		dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
+			s->name, s->rate);
+
+		/* If the EQ is enabled then disable it while we write out */
+		eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
+		if (eq1 & WM9081_EQ_ENA)
+			wm9081_write(codec, WM9081_EQ_1, 0);
+
+		/* Write out the other values */
+		for (i = 1; i < ARRAY_SIZE(s->config); i++)
+			wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]);
+
+		eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
+		wm9081_write(codec, WM9081_EQ_1, eq1);
+	}
+
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
+
+	return 0;
+}
+
+static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int reg;
+
+	reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2);
+
+	if (mute)
+		reg |= WM9081_DAC_MUTE;
+	else
+		reg &= ~WM9081_DAC_MUTE;
+
+	wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg);
+
+	return 0;
+}
+
+static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai,
+			     int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+
+	switch (clk_id) {
+	case WM9081_SYSCLK_MCLK:
+	case WM9081_SYSCLK_FLL_MCLK:
+		wm9081->sysclk_source = clk_id;
+		wm9081->mclk_rate = freq;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
+			       unsigned int mask, int slots)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+
+	aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
+
+	if (slots < 1 || slots > 4)
+		return -EINVAL;
+
+	aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
+
+	switch (mask) {
+	case 1:
+		break;
+	case 2:
+		aif1 |= 0x10;
+		break;
+	case 4:
+		aif1 |= 0x20;
+		break;
+	case 8:
+		aif1 |= 0x30;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
+
+	return 0;
+}
+
+#define WM9081_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM9081_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm9081_dai_ops = {
+	.hw_params = wm9081_hw_params,
+	.set_sysclk = wm9081_set_sysclk,
+	.set_fmt = wm9081_set_dai_fmt,
+	.digital_mute = wm9081_digital_mute,
+	.set_tdm_slot = wm9081_set_tdm_slot,
+};
+
+/* We report two channels because the CODEC processes a stereo signal, even
+ * though it is only capable of handling a mono output.
+ */
+struct snd_soc_dai wm9081_dai = {
+	.name = "WM9081",
+	.playback = {
+		.stream_name = "HiFi Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM9081_RATES,
+		.formats = WM9081_FORMATS,
+	},
+	.ops = &wm9081_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm9081_dai);
+
+
+static struct snd_soc_codec *wm9081_codec;
+
+static int wm9081_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	struct wm9081_priv *wm9081;
+	int ret = 0;
+
+	if (wm9081_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm9081_codec;
+	codec = wm9081_codec;
+	wm9081 = codec->private_data;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm9081_snd_controls,
+			     ARRAY_SIZE(wm9081_snd_controls));
+	if (!wm9081->retune) {
+		dev_dbg(codec->dev,
+			"No ReTune Mobile data, using normal EQ\n");
+		snd_soc_add_controls(codec, wm9081_eq_controls,
+				     ARRAY_SIZE(wm9081_eq_controls));
+	}
+
+	snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets,
+				  ARRAY_SIZE(wm9081_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm9081_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm9081_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int wm9081_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 *reg_cache = codec->reg_cache;
+	int i;
+
+	for (i = 0; i < codec->reg_cache_size; i++) {
+		if (i == WM9081_SOFTWARE_RESET)
+			continue;
+
+		wm9081_write(codec, i, reg_cache[i]);
+	}
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+#else
+#define wm9081_suspend NULL
+#define wm9081_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_wm9081 = {
+	.probe = 	wm9081_probe,
+	.remove = 	wm9081_remove,
+	.suspend =	wm9081_suspend,
+	.resume =	wm9081_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
+
+static int wm9081_register(struct wm9081_priv *wm9081)
+{
+	struct snd_soc_codec *codec = &wm9081->codec;
+	int ret;
+	u16 reg;
+
+	if (wm9081_codec) {
+		dev_err(codec->dev, "Another WM9081 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm9081;
+	codec->name = "WM9081";
+	codec->owner = THIS_MODULE;
+	codec->read = wm9081_read;
+	codec->write = wm9081_write;
+	codec->dai = &wm9081_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
+	codec->reg_cache = &wm9081->reg_cache;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm9081_set_bias_level;
+
+	memcpy(codec->reg_cache, wm9081_reg_defaults,
+	       sizeof(wm9081_reg_defaults));
+
+	reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET);
+	if (reg != 0x9081) {
+		dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = wm9081_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Enable zero cross by default */
+	reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT);
+	wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
+	reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
+	wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+		     reg | WM9081_SPKPGAZC);
+
+	wm9081_dai.dev = codec->dev;
+
+	wm9081_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm9081_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err:
+	kfree(wm9081);
+	return ret;
+}
+
+static void wm9081_unregister(struct wm9081_priv *wm9081)
+{
+	wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm9081_dai);
+	snd_soc_unregister_codec(&wm9081->codec);
+	kfree(wm9081);
+	wm9081_codec = NULL;
+}
+
+static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm9081_priv *wm9081;
+	struct snd_soc_codec *codec;
+
+	wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL);
+	if (wm9081 == NULL)
+		return -ENOMEM;
+
+	codec = &wm9081->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	wm9081->retune = i2c->dev.platform_data;
+
+	i2c_set_clientdata(i2c, wm9081);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm9081_register(wm9081);
+}
+
+static __devexit int wm9081_i2c_remove(struct i2c_client *client)
+{
+	struct wm9081_priv *wm9081 = i2c_get_clientdata(client);
+	wm9081_unregister(wm9081);
+	return 0;
+}
+
+static const struct i2c_device_id wm9081_i2c_id[] = {
+	{ "wm9081", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
+
+static struct i2c_driver wm9081_i2c_driver = {
+	.driver = {
+		.name = "wm9081",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm9081_i2c_probe,
+	.remove =   __devexit_p(wm9081_i2c_remove),
+	.id_table = wm9081_i2c_id,
+};
+
+static int __init wm9081_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm9081_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
+		       ret);
+	}
+
+	return ret;
+}
+module_init(wm9081_modinit);
+
+static void __exit wm9081_exit(void)
+{
+	i2c_del_driver(&wm9081_i2c_driver);
+}
+module_exit(wm9081_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM9081 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm9081.h b/sound/soc/codecs/wm9081.h
new file mode 100644
index 00000000000..42d3bc75702
--- /dev/null
+++ b/sound/soc/codecs/wm9081.h
@@ -0,0 +1,787 @@
+#ifndef WM9081_H
+#define WM9081_H
+
+/*
+ * wm9081.c  --  WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <sound/soc.h>
+
+extern struct snd_soc_dai wm9081_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm9081;
+
+/*
+ * SYSCLK sources
+ */
+#define WM9081_SYSCLK_MCLK      1   /* Use MCLK without FLL */
+#define WM9081_SYSCLK_FLL_MCLK  2   /* Use MCLK, enabling FLL if required */
+
+/*
+ * Register values.
+ */
+#define WM9081_SOFTWARE_RESET                   0x00
+#define WM9081_ANALOGUE_LINEOUT                 0x02
+#define WM9081_ANALOGUE_SPEAKER_PGA             0x03
+#define WM9081_VMID_CONTROL                     0x04
+#define WM9081_BIAS_CONTROL_1                   0x05
+#define WM9081_ANALOGUE_MIXER                   0x07
+#define WM9081_ANTI_POP_CONTROL                 0x08
+#define WM9081_ANALOGUE_SPEAKER_1               0x09
+#define WM9081_ANALOGUE_SPEAKER_2               0x0A
+#define WM9081_POWER_MANAGEMENT                 0x0B
+#define WM9081_CLOCK_CONTROL_1                  0x0C
+#define WM9081_CLOCK_CONTROL_2                  0x0D
+#define WM9081_CLOCK_CONTROL_3                  0x0E
+#define WM9081_FLL_CONTROL_1                    0x10
+#define WM9081_FLL_CONTROL_2                    0x11
+#define WM9081_FLL_CONTROL_3                    0x12
+#define WM9081_FLL_CONTROL_4                    0x13
+#define WM9081_FLL_CONTROL_5                    0x14
+#define WM9081_AUDIO_INTERFACE_1                0x16
+#define WM9081_AUDIO_INTERFACE_2                0x17
+#define WM9081_AUDIO_INTERFACE_3                0x18
+#define WM9081_AUDIO_INTERFACE_4                0x19
+#define WM9081_INTERRUPT_STATUS                 0x1A
+#define WM9081_INTERRUPT_STATUS_MASK            0x1B
+#define WM9081_INTERRUPT_POLARITY               0x1C
+#define WM9081_INTERRUPT_CONTROL                0x1D
+#define WM9081_DAC_DIGITAL_1                    0x1E
+#define WM9081_DAC_DIGITAL_2                    0x1F
+#define WM9081_DRC_1                            0x20
+#define WM9081_DRC_2                            0x21
+#define WM9081_DRC_3                            0x22
+#define WM9081_DRC_4                            0x23
+#define WM9081_WRITE_SEQUENCER_1                0x26
+#define WM9081_WRITE_SEQUENCER_2                0x27
+#define WM9081_MW_SLAVE_1                       0x28
+#define WM9081_EQ_1                             0x2A
+#define WM9081_EQ_2                             0x2B
+#define WM9081_EQ_3                             0x2C
+#define WM9081_EQ_4                             0x2D
+#define WM9081_EQ_5                             0x2E
+#define WM9081_EQ_6                             0x2F
+#define WM9081_EQ_7                             0x30
+#define WM9081_EQ_8                             0x31
+#define WM9081_EQ_9                             0x32
+#define WM9081_EQ_10                            0x33
+#define WM9081_EQ_11                            0x34
+#define WM9081_EQ_12                            0x35
+#define WM9081_EQ_13                            0x36
+#define WM9081_EQ_14                            0x37
+#define WM9081_EQ_15                            0x38
+#define WM9081_EQ_16                            0x39
+#define WM9081_EQ_17                            0x3A
+#define WM9081_EQ_18                            0x3B
+#define WM9081_EQ_19                            0x3C
+#define WM9081_EQ_20                            0x3D
+
+#define WM9081_REGISTER_COUNT                   55
+#define WM9081_MAX_REGISTER                     0x3D
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+#define WM9081_SW_RST_DEV_ID1_MASK              0xFFFF  /* SW_RST_DEV_ID1 - [15:0] */
+#define WM9081_SW_RST_DEV_ID1_SHIFT                  0  /* SW_RST_DEV_ID1 - [15:0] */
+#define WM9081_SW_RST_DEV_ID1_WIDTH                 16  /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R2 (0x02) - Analogue Lineout
+ */
+#define WM9081_LINEOUT_MUTE                     0x0080  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_MASK                0x0080  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_SHIFT                    7  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_WIDTH                    1  /* LINEOUT_MUTE */
+#define WM9081_LINEOUTZC                        0x0040  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_MASK                   0x0040  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_SHIFT                       6  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_WIDTH                       1  /* LINEOUTZC */
+#define WM9081_LINEOUT_VOL_MASK                 0x003F  /* LINEOUT_VOL - [5:0] */
+#define WM9081_LINEOUT_VOL_SHIFT                     0  /* LINEOUT_VOL - [5:0] */
+#define WM9081_LINEOUT_VOL_WIDTH                     6  /* LINEOUT_VOL - [5:0] */
+
+/*
+ * R3 (0x03) - Analogue Speaker PGA
+ */
+#define WM9081_SPKPGA_MUTE                      0x0080  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_MASK                 0x0080  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_SHIFT                     7  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_WIDTH                     1  /* SPKPGA_MUTE */
+#define WM9081_SPKPGAZC                         0x0040  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_MASK                    0x0040  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_SHIFT                        6  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_WIDTH                        1  /* SPKPGAZC */
+#define WM9081_SPKPGA_VOL_MASK                  0x003F  /* SPKPGA_VOL - [5:0] */
+#define WM9081_SPKPGA_VOL_SHIFT                      0  /* SPKPGA_VOL - [5:0] */
+#define WM9081_SPKPGA_VOL_WIDTH                      6  /* SPKPGA_VOL - [5:0] */
+
+/*
+ * R4 (0x04) - VMID Control
+ */
+#define WM9081_VMID_BUF_ENA                     0x0020  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_MASK                0x0020  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_SHIFT                    5  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
+#define WM9081_VMID_RAMP                        0x0008  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_MASK                   0x0008  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_SHIFT                       3  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_WIDTH                       1  /* VMID_RAMP */
+#define WM9081_VMID_SEL_MASK                    0x0006  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_SEL_SHIFT                        1  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_SEL_WIDTH                        2  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_FAST_ST                     0x0001  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_MASK                0x0001  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_SHIFT                    0  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_WIDTH                    1  /* VMID_FAST_ST */
+
+/*
+ * R5 (0x05) - Bias Control 1
+ */
+#define WM9081_BIAS_SRC                         0x0040  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_MASK                    0x0040  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_SHIFT                        6  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_WIDTH                        1  /* BIAS_SRC */
+#define WM9081_STBY_BIAS_LVL                    0x0020  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_MASK               0x0020  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_SHIFT                   5  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_WIDTH                   1  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_ENA                    0x0010  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_MASK               0x0010  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_SHIFT                   4  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_WIDTH                   1  /* STBY_BIAS_ENA */
+#define WM9081_BIAS_LVL_MASK                    0x000C  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_LVL_SHIFT                        2  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_LVL_WIDTH                        2  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_ENA                         0x0002  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_MASK                    0x0002  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_SHIFT                        1  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_WIDTH                        1  /* BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA                 0x0001  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_MASK            0x0001  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_SHIFT                0  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_WIDTH                1  /* STARTUP_BIAS_ENA */
+
+/*
+ * R7 (0x07) - Analogue Mixer
+ */
+#define WM9081_DAC_SEL                          0x0010  /* DAC_SEL */
+#define WM9081_DAC_SEL_MASK                     0x0010  /* DAC_SEL */
+#define WM9081_DAC_SEL_SHIFT                         4  /* DAC_SEL */
+#define WM9081_DAC_SEL_WIDTH                         1  /* DAC_SEL */
+#define WM9081_IN2_VOL                          0x0008  /* IN2_VOL */
+#define WM9081_IN2_VOL_MASK                     0x0008  /* IN2_VOL */
+#define WM9081_IN2_VOL_SHIFT                         3  /* IN2_VOL */
+#define WM9081_IN2_VOL_WIDTH                         1  /* IN2_VOL */
+#define WM9081_IN2_ENA                          0x0004  /* IN2_ENA */
+#define WM9081_IN2_ENA_MASK                     0x0004  /* IN2_ENA */
+#define WM9081_IN2_ENA_SHIFT                         2  /* IN2_ENA */
+#define WM9081_IN2_ENA_WIDTH                         1  /* IN2_ENA */
+#define WM9081_IN1_VOL                          0x0002  /* IN1_VOL */
+#define WM9081_IN1_VOL_MASK                     0x0002  /* IN1_VOL */
+#define WM9081_IN1_VOL_SHIFT                         1  /* IN1_VOL */
+#define WM9081_IN1_VOL_WIDTH                         1  /* IN1_VOL */
+#define WM9081_IN1_ENA                          0x0001  /* IN1_ENA */
+#define WM9081_IN1_ENA_MASK                     0x0001  /* IN1_ENA */
+#define WM9081_IN1_ENA_SHIFT                         0  /* IN1_ENA */
+#define WM9081_IN1_ENA_WIDTH                         1  /* IN1_ENA */
+
+/*
+ * R8 (0x08) - Anti Pop Control
+ */
+#define WM9081_LINEOUT_DISCH                    0x0004  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_MASK               0x0004  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_SHIFT                   2  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_WIDTH                   1  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_VROI                     0x0002  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_MASK                0x0002  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_SHIFT                    1  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_WIDTH                    1  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_CLAMP                    0x0001  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_MASK               0x0001  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_SHIFT                   0  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_WIDTH                   1  /* LINEOUT_CLAMP */
+
+/*
+ * R9 (0x09) - Analogue Speaker 1
+ */
+#define WM9081_SPK_DCGAIN_MASK                  0x0038  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_DCGAIN_SHIFT                      3  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_DCGAIN_WIDTH                      3  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_ACGAIN_MASK                  0x0007  /* SPK_ACGAIN - [2:0] */
+#define WM9081_SPK_ACGAIN_SHIFT                      0  /* SPK_ACGAIN - [2:0] */
+#define WM9081_SPK_ACGAIN_WIDTH                      3  /* SPK_ACGAIN - [2:0] */
+
+/*
+ * R10 (0x0A) - Analogue Speaker 2
+ */
+#define WM9081_SPK_MODE                         0x0040  /* SPK_MODE */
+#define WM9081_SPK_MODE_MASK                    0x0040  /* SPK_MODE */
+#define WM9081_SPK_MODE_SHIFT                        6  /* SPK_MODE */
+#define WM9081_SPK_MODE_WIDTH                        1  /* SPK_MODE */
+#define WM9081_SPK_INV_MUTE                     0x0010  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_MASK                0x0010  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_SHIFT                    4  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_WIDTH                    1  /* SPK_INV_MUTE */
+#define WM9081_OUT_SPK_CTRL                     0x0008  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_MASK                0x0008  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_SHIFT                    3  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_WIDTH                    1  /* OUT_SPK_CTRL */
+
+/*
+ * R11 (0x0B) - Power Management
+ */
+#define WM9081_TSHUT_ENA                        0x0100  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_MASK                   0x0100  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_SHIFT                       8  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
+#define WM9081_TSENSE_ENA                       0x0080  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_MASK                  0x0080  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_SHIFT                      7  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_WIDTH                      1  /* TSENSE_ENA */
+#define WM9081_TEMP_SHUT                        0x0040  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_MASK                   0x0040  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_SHIFT                       6  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_WIDTH                       1  /* TEMP_SHUT */
+#define WM9081_LINEOUT_ENA                      0x0010  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_MASK                 0x0010  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_SHIFT                     4  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_WIDTH                     1  /* LINEOUT_ENA */
+#define WM9081_SPKPGA_ENA                       0x0004  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_MASK                  0x0004  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_SHIFT                      2  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_WIDTH                      1  /* SPKPGA_ENA */
+#define WM9081_SPK_ENA                          0x0002  /* SPK_ENA */
+#define WM9081_SPK_ENA_MASK                     0x0002  /* SPK_ENA */
+#define WM9081_SPK_ENA_SHIFT                         1  /* SPK_ENA */
+#define WM9081_SPK_ENA_WIDTH                         1  /* SPK_ENA */
+#define WM9081_DAC_ENA                          0x0001  /* DAC_ENA */
+#define WM9081_DAC_ENA_MASK                     0x0001  /* DAC_ENA */
+#define WM9081_DAC_ENA_SHIFT                         0  /* DAC_ENA */
+#define WM9081_DAC_ENA_WIDTH                         1  /* DAC_ENA */
+
+/*
+ * R12 (0x0C) - Clock Control 1
+ */
+#define WM9081_CLK_OP_DIV_MASK                  0x1C00  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_OP_DIV_SHIFT                     10  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_OP_DIV_WIDTH                      3  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_TO_DIV_MASK                  0x0300  /* CLK_TO_DIV - [9:8] */
+#define WM9081_CLK_TO_DIV_SHIFT                      8  /* CLK_TO_DIV - [9:8] */
+#define WM9081_CLK_TO_DIV_WIDTH                      2  /* CLK_TO_DIV - [9:8] */
+#define WM9081_MCLKDIV2                         0x0080  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_MASK                    0x0080  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_SHIFT                        7  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_WIDTH                        1  /* MCLKDIV2 */
+
+/*
+ * R13 (0x0D) - Clock Control 2
+ */
+#define WM9081_CLK_SYS_RATE_MASK                0x00F0  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_CLK_SYS_RATE_SHIFT                    4  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_CLK_SYS_RATE_WIDTH                    4  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_SAMPLE_RATE_MASK                 0x000F  /* SAMPLE_RATE - [3:0] */
+#define WM9081_SAMPLE_RATE_SHIFT                     0  /* SAMPLE_RATE - [3:0] */
+#define WM9081_SAMPLE_RATE_WIDTH                     4  /* SAMPLE_RATE - [3:0] */
+
+/*
+ * R14 (0x0E) - Clock Control 3
+ */
+#define WM9081_CLK_SRC_SEL                      0x2000  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_MASK                 0x2000  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_SHIFT                    13  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_WIDTH                     1  /* CLK_SRC_SEL */
+#define WM9081_CLK_OP_ENA                       0x0020  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_MASK                  0x0020  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_SHIFT                      5  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_WIDTH                      1  /* CLK_OP_ENA */
+#define WM9081_CLK_TO_ENA                       0x0004  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_MASK                  0x0004  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_SHIFT                      2  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_WIDTH                      1  /* CLK_TO_ENA */
+#define WM9081_CLK_DSP_ENA                      0x0002  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_MASK                 0x0002  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_SHIFT                     1  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_WIDTH                     1  /* CLK_DSP_ENA */
+#define WM9081_CLK_SYS_ENA                      0x0001  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_MASK                 0x0001  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_SHIFT                     0  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_WIDTH                     1  /* CLK_SYS_ENA */
+
+/*
+ * R16 (0x10) - FLL Control 1
+ */
+#define WM9081_FLL_HOLD                         0x0008  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_MASK                    0x0008  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_SHIFT                        3  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_WIDTH                        1  /* FLL_HOLD */
+#define WM9081_FLL_FRAC                         0x0004  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_MASK                    0x0004  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_SHIFT                        2  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
+#define WM9081_FLL_ENA                          0x0001  /* FLL_ENA */
+#define WM9081_FLL_ENA_MASK                     0x0001  /* FLL_ENA */
+#define WM9081_FLL_ENA_SHIFT                         0  /* FLL_ENA */
+#define WM9081_FLL_ENA_WIDTH                         1  /* FLL_ENA */
+
+/*
+ * R17 (0x11) - FLL Control 2
+ */
+#define WM9081_FLL_OUTDIV_MASK                  0x0700  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_OUTDIV_SHIFT                      8  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_OUTDIV_WIDTH                      3  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_CTRL_RATE_MASK               0x0070  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_CTRL_RATE_SHIFT                   4  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_FRATIO_MASK                  0x0007  /* FLL_FRATIO - [2:0] */
+#define WM9081_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [2:0] */
+#define WM9081_FLL_FRATIO_WIDTH                      3  /* FLL_FRATIO - [2:0] */
+
+/*
+ * R18 (0x12) - FLL Control 3
+ */
+#define WM9081_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
+#define WM9081_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
+#define WM9081_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
+
+/*
+ * R19 (0x13) - FLL Control 4
+ */
+#define WM9081_FLL_N_MASK                       0x7FE0  /* FLL_N - [14:5] */
+#define WM9081_FLL_N_SHIFT                           5  /* FLL_N - [14:5] */
+#define WM9081_FLL_N_WIDTH                          10  /* FLL_N - [14:5] */
+#define WM9081_FLL_GAIN_MASK                    0x000F  /* FLL_GAIN - [3:0] */
+#define WM9081_FLL_GAIN_SHIFT                        0  /* FLL_GAIN - [3:0] */
+#define WM9081_FLL_GAIN_WIDTH                        4  /* FLL_GAIN - [3:0] */
+
+/*
+ * R20 (0x14) - FLL Control 5
+ */
+#define WM9081_FLL_CLK_REF_DIV_MASK             0x0018  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_REF_DIV_SHIFT                 3  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_REF_DIV_WIDTH                 2  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_SRC_MASK                 0x0003  /* FLL_CLK_SRC - [1:0] */
+#define WM9081_FLL_CLK_SRC_SHIFT                     0  /* FLL_CLK_SRC - [1:0] */
+#define WM9081_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [1:0] */
+
+/*
+ * R22 (0x16) - Audio Interface 1
+ */
+#define WM9081_AIFDAC_CHAN                      0x0040  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_MASK                 0x0040  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_SHIFT                     6  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_WIDTH                     1  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_TDM_SLOT_MASK             0x0030  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_SLOT_SHIFT                 4  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_SLOT_WIDTH                 2  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_MODE_MASK             0x000C  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_AIFDAC_TDM_MODE_SHIFT                 2  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_AIFDAC_TDM_MODE_WIDTH                 2  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_DAC_COMP                         0x0002  /* DAC_COMP */
+#define WM9081_DAC_COMP_MASK                    0x0002  /* DAC_COMP */
+#define WM9081_DAC_COMP_SHIFT                        1  /* DAC_COMP */
+#define WM9081_DAC_COMP_WIDTH                        1  /* DAC_COMP */
+#define WM9081_DAC_COMPMODE                     0x0001  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_MASK                0x0001  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_SHIFT                    0  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_WIDTH                    1  /* DAC_COMPMODE */
+
+/*
+ * R23 (0x17) - Audio Interface 2
+ */
+#define WM9081_AIF_TRIS                         0x0200  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_MASK                    0x0200  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_SHIFT                        9  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_WIDTH                        1  /* AIF_TRIS */
+#define WM9081_DAC_DAT_INV                      0x0100  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_MASK                 0x0100  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_SHIFT                     8  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_WIDTH                     1  /* DAC_DAT_INV */
+#define WM9081_AIF_BCLK_INV                     0x0080  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_MASK                0x0080  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_SHIFT                    7  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_WIDTH                    1  /* AIF_BCLK_INV */
+#define WM9081_BCLK_DIR                         0x0040  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_MASK                    0x0040  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_SHIFT                        6  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_WIDTH                        1  /* BCLK_DIR */
+#define WM9081_LRCLK_DIR                        0x0020  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_MASK                   0x0020  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_SHIFT                       5  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_WIDTH                       1  /* LRCLK_DIR */
+#define WM9081_AIF_LRCLK_INV                    0x0010  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_MASK               0x0010  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_SHIFT                   4  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_WIDTH                   1  /* AIF_LRCLK_INV */
+#define WM9081_AIF_WL_MASK                      0x000C  /* AIF_WL - [3:2] */
+#define WM9081_AIF_WL_SHIFT                          2  /* AIF_WL - [3:2] */
+#define WM9081_AIF_WL_WIDTH                          2  /* AIF_WL - [3:2] */
+#define WM9081_AIF_FMT_MASK                     0x0003  /* AIF_FMT - [1:0] */
+#define WM9081_AIF_FMT_SHIFT                         0  /* AIF_FMT - [1:0] */
+#define WM9081_AIF_FMT_WIDTH                         2  /* AIF_FMT - [1:0] */
+
+/*
+ * R24 (0x18) - Audio Interface 3
+ */
+#define WM9081_BCLK_DIV_MASK                    0x001F  /* BCLK_DIV - [4:0] */
+#define WM9081_BCLK_DIV_SHIFT                        0  /* BCLK_DIV - [4:0] */
+#define WM9081_BCLK_DIV_WIDTH                        5  /* BCLK_DIV - [4:0] */
+
+/*
+ * R25 (0x19) - Audio Interface 4
+ */
+#define WM9081_LRCLK_RATE_MASK                  0x07FF  /* LRCLK_RATE - [10:0] */
+#define WM9081_LRCLK_RATE_SHIFT                      0  /* LRCLK_RATE - [10:0] */
+#define WM9081_LRCLK_RATE_WIDTH                     11  /* LRCLK_RATE - [10:0] */
+
+/*
+ * R26 (0x1A) - Interrupt Status
+ */
+#define WM9081_WSEQ_BUSY_EINT                   0x0004  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_MASK              0x0004  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_SHIFT                  2  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_WIDTH                  1  /* WSEQ_BUSY_EINT */
+#define WM9081_TSHUT_EINT                       0x0001  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_MASK                  0x0001  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_SHIFT                      0  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_WIDTH                      1  /* TSHUT_EINT */
+
+/*
+ * R27 (0x1B) - Interrupt Status Mask
+ */
+#define WM9081_IM_WSEQ_BUSY_EINT                0x0004  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_MASK           0x0004  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_SHIFT               2  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_WIDTH               1  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_TSHUT_EINT                    0x0001  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_MASK               0x0001  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_SHIFT                   0  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_WIDTH                   1  /* IM_TSHUT_EINT */
+
+/*
+ * R28 (0x1C) - Interrupt Polarity
+ */
+#define WM9081_TSHUT_INV                        0x0001  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_MASK                   0x0001  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_SHIFT                       0  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_WIDTH                       1  /* TSHUT_INV */
+
+/*
+ * R29 (0x1D) - Interrupt Control
+ */
+#define WM9081_IRQ_POL                          0x8000  /* IRQ_POL */
+#define WM9081_IRQ_POL_MASK                     0x8000  /* IRQ_POL */
+#define WM9081_IRQ_POL_SHIFT                        15  /* IRQ_POL */
+#define WM9081_IRQ_POL_WIDTH                         1  /* IRQ_POL */
+#define WM9081_IRQ_OP_CTRL                      0x0001  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_MASK                 0x0001  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_SHIFT                     0  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_WIDTH                     1  /* IRQ_OP_CTRL */
+
+/*
+ * R30 (0x1E) - DAC Digital 1
+ */
+#define WM9081_DAC_VOL_MASK                     0x00FF  /* DAC_VOL - [7:0] */
+#define WM9081_DAC_VOL_SHIFT                         0  /* DAC_VOL - [7:0] */
+#define WM9081_DAC_VOL_WIDTH                         8  /* DAC_VOL - [7:0] */
+
+/*
+ * R31 (0x1F) - DAC Digital 2
+ */
+#define WM9081_DAC_MUTERATE                     0x0400  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_MASK                0x0400  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_SHIFT                   10  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTEMODE                     0x0200  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_MASK                0x0200  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_SHIFT                    9  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_WIDTH                    1  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTE                         0x0008  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_MASK                    0x0008  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_SHIFT                        3  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_WIDTH                        1  /* DAC_MUTE */
+#define WM9081_DEEMPH_MASK                      0x0006  /* DEEMPH - [2:1] */
+#define WM9081_DEEMPH_SHIFT                          1  /* DEEMPH - [2:1] */
+#define WM9081_DEEMPH_WIDTH                          2  /* DEEMPH - [2:1] */
+
+/*
+ * R32 (0x20) - DRC 1
+ */
+#define WM9081_DRC_ENA                          0x8000  /* DRC_ENA */
+#define WM9081_DRC_ENA_MASK                     0x8000  /* DRC_ENA */
+#define WM9081_DRC_ENA_SHIFT                        15  /* DRC_ENA */
+#define WM9081_DRC_ENA_WIDTH                         1  /* DRC_ENA */
+#define WM9081_DRC_STARTUP_GAIN_MASK            0x07C0  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_STARTUP_GAIN_SHIFT                6  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_STARTUP_GAIN_WIDTH                5  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_FF_DLY                       0x0020  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_MASK                  0x0020  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_SHIFT                      5  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_WIDTH                      1  /* DRC_FF_DLY */
+#define WM9081_DRC_QR                           0x0004  /* DRC_QR */
+#define WM9081_DRC_QR_MASK                      0x0004  /* DRC_QR */
+#define WM9081_DRC_QR_SHIFT                          2  /* DRC_QR */
+#define WM9081_DRC_QR_WIDTH                          1  /* DRC_QR */
+#define WM9081_DRC_ANTICLIP                     0x0002  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_MASK                0x0002  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_SHIFT                    1  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_WIDTH                    1  /* DRC_ANTICLIP */
+
+/*
+ * R33 (0x21) - DRC 2
+ */
+#define WM9081_DRC_ATK_MASK                     0xF000  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_ATK_SHIFT                        12  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_ATK_WIDTH                         4  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_DCY_MASK                     0x0F00  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_DCY_SHIFT                         8  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_DCY_WIDTH                         4  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_QR_THR_MASK                  0x00C0  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_THR_SHIFT                      6  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_THR_WIDTH                      2  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_DCY_MASK                  0x0030  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_QR_DCY_SHIFT                      4  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_QR_DCY_WIDTH                      2  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_MINGAIN_MASK                 0x000C  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MINGAIN_SHIFT                     2  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MINGAIN_WIDTH                     2  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MAXGAIN_MASK                 0x0003  /* DRC_MAXGAIN - [1:0] */
+#define WM9081_DRC_MAXGAIN_SHIFT                     0  /* DRC_MAXGAIN - [1:0] */
+#define WM9081_DRC_MAXGAIN_WIDTH                     2  /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R34 (0x22) - DRC 3
+ */
+#define WM9081_DRC_HI_COMP_MASK                 0x0038  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_HI_COMP_SHIFT                     3  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_HI_COMP_WIDTH                     3  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_LO_COMP_MASK                 0x0007  /* DRC_LO_COMP - [2:0] */
+#define WM9081_DRC_LO_COMP_SHIFT                     0  /* DRC_LO_COMP - [2:0] */
+#define WM9081_DRC_LO_COMP_WIDTH                     3  /* DRC_LO_COMP - [2:0] */
+
+/*
+ * R35 (0x23) - DRC 4
+ */
+#define WM9081_DRC_KNEE_IP_MASK                 0x07E0  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_IP_SHIFT                     5  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_IP_WIDTH                     6  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_OP_MASK                 0x001F  /* DRC_KNEE_OP - [4:0] */
+#define WM9081_DRC_KNEE_OP_SHIFT                     0  /* DRC_KNEE_OP - [4:0] */
+#define WM9081_DRC_KNEE_OP_WIDTH                     5  /* DRC_KNEE_OP - [4:0] */
+
+/*
+ * R38 (0x26) - Write Sequencer 1
+ */
+#define WM9081_WSEQ_ENA                         0x8000  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_MASK                    0x8000  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_SHIFT                       15  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_WIDTH                        1  /* WSEQ_ENA */
+#define WM9081_WSEQ_ABORT                       0x0200  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_MASK                  0x0200  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_SHIFT                      9  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_WIDTH                      1  /* WSEQ_ABORT */
+#define WM9081_WSEQ_START                       0x0100  /* WSEQ_START */
+#define WM9081_WSEQ_START_MASK                  0x0100  /* WSEQ_START */
+#define WM9081_WSEQ_START_SHIFT                      8  /* WSEQ_START */
+#define WM9081_WSEQ_START_WIDTH                      1  /* WSEQ_START */
+#define WM9081_WSEQ_START_INDEX_MASK            0x007F  /* WSEQ_START_INDEX - [6:0] */
+#define WM9081_WSEQ_START_INDEX_SHIFT                0  /* WSEQ_START_INDEX - [6:0] */
+#define WM9081_WSEQ_START_INDEX_WIDTH                7  /* WSEQ_START_INDEX - [6:0] */
+
+/*
+ * R39 (0x27) - Write Sequencer 2
+ */
+#define WM9081_WSEQ_CURRENT_INDEX_MASK          0x07F0  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_CURRENT_INDEX_SHIFT              4  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_CURRENT_INDEX_WIDTH              7  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_BUSY                        0x0001  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_MASK                   0x0001  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_SHIFT                       0  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_WIDTH                       1  /* WSEQ_BUSY */
+
+/*
+ * R40 (0x28) - MW Slave 1
+ */
+#define WM9081_SPI_CFG                          0x0020  /* SPI_CFG */
+#define WM9081_SPI_CFG_MASK                     0x0020  /* SPI_CFG */
+#define WM9081_SPI_CFG_SHIFT                         5  /* SPI_CFG */
+#define WM9081_SPI_CFG_WIDTH                         1  /* SPI_CFG */
+#define WM9081_SPI_4WIRE                        0x0010  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_MASK                   0x0010  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_SHIFT                       4  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_WIDTH                       1  /* SPI_4WIRE */
+#define WM9081_ARA_ENA                          0x0008  /* ARA_ENA */
+#define WM9081_ARA_ENA_MASK                     0x0008  /* ARA_ENA */
+#define WM9081_ARA_ENA_SHIFT                         3  /* ARA_ENA */
+#define WM9081_ARA_ENA_WIDTH                         1  /* ARA_ENA */
+#define WM9081_AUTO_INC                         0x0002  /* AUTO_INC */
+#define WM9081_AUTO_INC_MASK                    0x0002  /* AUTO_INC */
+#define WM9081_AUTO_INC_SHIFT                        1  /* AUTO_INC */
+#define WM9081_AUTO_INC_WIDTH                        1  /* AUTO_INC */
+
+/*
+ * R42 (0x2A) - EQ 1
+ */
+#define WM9081_EQ_B1_GAIN_MASK                  0xF800  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B1_GAIN_SHIFT                     11  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B1_GAIN_WIDTH                      5  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B2_GAIN_MASK                  0x07C0  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B2_GAIN_SHIFT                      6  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B2_GAIN_WIDTH                      5  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B4_GAIN_MASK                  0x003E  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_B4_GAIN_SHIFT                      1  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_B4_GAIN_WIDTH                      5  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_ENA                           0x0001  /* EQ_ENA */
+#define WM9081_EQ_ENA_MASK                      0x0001  /* EQ_ENA */
+#define WM9081_EQ_ENA_SHIFT                          0  /* EQ_ENA */
+#define WM9081_EQ_ENA_WIDTH                          1  /* EQ_ENA */
+
+/*
+ * R43 (0x2B) - EQ 2
+ */
+#define WM9081_EQ_B3_GAIN_MASK                  0xF800  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B3_GAIN_SHIFT                     11  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B3_GAIN_WIDTH                      5  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B5_GAIN_MASK                  0x07C0  /* EQ_B5_GAIN - [10:6] */
+#define WM9081_EQ_B5_GAIN_SHIFT                      6  /* EQ_B5_GAIN - [10:6] */
+#define WM9081_EQ_B5_GAIN_WIDTH                      5  /* EQ_B5_GAIN - [10:6] */
+
+/*
+ * R44 (0x2C) - EQ 3
+ */
+#define WM9081_EQ_B1_A_MASK                     0xFFFF  /* EQ_B1_A - [15:0] */
+#define WM9081_EQ_B1_A_SHIFT                         0  /* EQ_B1_A - [15:0] */
+#define WM9081_EQ_B1_A_WIDTH                        16  /* EQ_B1_A - [15:0] */
+
+/*
+ * R45 (0x2D) - EQ 4
+ */
+#define WM9081_EQ_B1_B_MASK                     0xFFFF  /* EQ_B1_B - [15:0] */
+#define WM9081_EQ_B1_B_SHIFT                         0  /* EQ_B1_B - [15:0] */
+#define WM9081_EQ_B1_B_WIDTH                        16  /* EQ_B1_B - [15:0] */
+
+/*
+ * R46 (0x2E) - EQ 5
+ */
+#define WM9081_EQ_B1_PG_MASK                    0xFFFF  /* EQ_B1_PG - [15:0] */
+#define WM9081_EQ_B1_PG_SHIFT                        0  /* EQ_B1_PG - [15:0] */
+#define WM9081_EQ_B1_PG_WIDTH                       16  /* EQ_B1_PG - [15:0] */
+
+/*
+ * R47 (0x2F) - EQ 6
+ */
+#define WM9081_EQ_B2_A_MASK                     0xFFFF  /* EQ_B2_A - [15:0] */
+#define WM9081_EQ_B2_A_SHIFT                         0  /* EQ_B2_A - [15:0] */
+#define WM9081_EQ_B2_A_WIDTH                        16  /* EQ_B2_A - [15:0] */
+
+/*
+ * R48 (0x30) - EQ 7
+ */
+#define WM9081_EQ_B2_B_MASK                     0xFFFF  /* EQ_B2_B - [15:0] */
+#define WM9081_EQ_B2_B_SHIFT                         0  /* EQ_B2_B - [15:0] */
+#define WM9081_EQ_B2_B_WIDTH                        16  /* EQ_B2_B - [15:0] */
+
+/*
+ * R49 (0x31) - EQ 8
+ */
+#define WM9081_EQ_B2_C_MASK                     0xFFFF  /* EQ_B2_C - [15:0] */
+#define WM9081_EQ_B2_C_SHIFT                         0  /* EQ_B2_C - [15:0] */
+#define WM9081_EQ_B2_C_WIDTH                        16  /* EQ_B2_C - [15:0] */
+
+/*
+ * R50 (0x32) - EQ 9
+ */
+#define WM9081_EQ_B2_PG_MASK                    0xFFFF  /* EQ_B2_PG - [15:0] */
+#define WM9081_EQ_B2_PG_SHIFT                        0  /* EQ_B2_PG - [15:0] */
+#define WM9081_EQ_B2_PG_WIDTH                       16  /* EQ_B2_PG - [15:0] */
+
+/*
+ * R51 (0x33) - EQ 10
+ */
+#define WM9081_EQ_B4_A_MASK                     0xFFFF  /* EQ_B4_A - [15:0] */
+#define WM9081_EQ_B4_A_SHIFT                         0  /* EQ_B4_A - [15:0] */
+#define WM9081_EQ_B4_A_WIDTH                        16  /* EQ_B4_A - [15:0] */
+
+/*
+ * R52 (0x34) - EQ 11
+ */
+#define WM9081_EQ_B4_B_MASK                     0xFFFF  /* EQ_B4_B - [15:0] */
+#define WM9081_EQ_B4_B_SHIFT                         0  /* EQ_B4_B - [15:0] */
+#define WM9081_EQ_B4_B_WIDTH                        16  /* EQ_B4_B - [15:0] */
+
+/*
+ * R53 (0x35) - EQ 12
+ */
+#define WM9081_EQ_B4_C_MASK                     0xFFFF  /* EQ_B4_C - [15:0] */
+#define WM9081_EQ_B4_C_SHIFT                         0  /* EQ_B4_C - [15:0] */
+#define WM9081_EQ_B4_C_WIDTH                        16  /* EQ_B4_C - [15:0] */
+
+/*
+ * R54 (0x36) - EQ 13
+ */
+#define WM9081_EQ_B4_PG_MASK                    0xFFFF  /* EQ_B4_PG - [15:0] */
+#define WM9081_EQ_B4_PG_SHIFT                        0  /* EQ_B4_PG - [15:0] */
+#define WM9081_EQ_B4_PG_WIDTH                       16  /* EQ_B4_PG - [15:0] */
+
+/*
+ * R55 (0x37) - EQ 14
+ */
+#define WM9081_EQ_B3_A_MASK                     0xFFFF  /* EQ_B3_A - [15:0] */
+#define WM9081_EQ_B3_A_SHIFT                         0  /* EQ_B3_A - [15:0] */
+#define WM9081_EQ_B3_A_WIDTH                        16  /* EQ_B3_A - [15:0] */
+
+/*
+ * R56 (0x38) - EQ 15
+ */
+#define WM9081_EQ_B3_B_MASK                     0xFFFF  /* EQ_B3_B - [15:0] */
+#define WM9081_EQ_B3_B_SHIFT                         0  /* EQ_B3_B - [15:0] */
+#define WM9081_EQ_B3_B_WIDTH                        16  /* EQ_B3_B - [15:0] */
+
+/*
+ * R57 (0x39) - EQ 16
+ */
+#define WM9081_EQ_B3_C_MASK                     0xFFFF  /* EQ_B3_C - [15:0] */
+#define WM9081_EQ_B3_C_SHIFT                         0  /* EQ_B3_C - [15:0] */
+#define WM9081_EQ_B3_C_WIDTH                        16  /* EQ_B3_C - [15:0] */
+
+/*
+ * R58 (0x3A) - EQ 17
+ */
+#define WM9081_EQ_B3_PG_MASK                    0xFFFF  /* EQ_B3_PG - [15:0] */
+#define WM9081_EQ_B3_PG_SHIFT                        0  /* EQ_B3_PG - [15:0] */
+#define WM9081_EQ_B3_PG_WIDTH                       16  /* EQ_B3_PG - [15:0] */
+
+/*
+ * R59 (0x3B) - EQ 18
+ */
+#define WM9081_EQ_B5_A_MASK                     0xFFFF  /* EQ_B5_A - [15:0] */
+#define WM9081_EQ_B5_A_SHIFT                         0  /* EQ_B5_A - [15:0] */
+#define WM9081_EQ_B5_A_WIDTH                        16  /* EQ_B5_A - [15:0] */
+
+/*
+ * R60 (0x3C) - EQ 19
+ */
+#define WM9081_EQ_B5_B_MASK                     0xFFFF  /* EQ_B5_B - [15:0] */
+#define WM9081_EQ_B5_B_SHIFT                         0  /* EQ_B5_B - [15:0] */
+#define WM9081_EQ_B5_B_WIDTH                        16  /* EQ_B5_B - [15:0] */
+
+/*
+ * R61 (0x3D) - EQ 20
+ */
+#define WM9081_EQ_B5_PG_MASK                    0xFFFF  /* EQ_B5_PG - [15:0] */
+#define WM9081_EQ_B5_PG_SHIFT                        0  /* EQ_B5_PG - [15:0] */
+#define WM9081_EQ_B5_PG_WIDTH                       16  /* EQ_B5_PG - [15:0] */
+
+
+#endif
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index c2d1a7a18fa..fa88b463e71 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -282,14 +282,14 @@ struct snd_soc_dai wm9705_dai[] = {
 			.channels_min = 1,
 			.channels_max = 2,
 			.rates = WM9705_AC97_RATES,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.formats = SND_SOC_STD_AC97_FMTS,
 		},
 		.capture = {
 			.stream_name = "HiFi Capture",
 			.channels_min = 1,
 			.channels_max = 2,
 			.rates = WM9705_AC97_RATES,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.formats = SND_SOC_STD_AC97_FMTS,
 		},
 		.ops = &wm9705_dai_ops,
 	},
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 765cf1e7369..1fd4e88f50c 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -534,13 +534,13 @@ struct snd_soc_dai wm9712_dai[] = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "HiFi Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9712_dai_ops_hifi,
 },
 {
@@ -550,7 +550,7 @@ struct snd_soc_dai wm9712_dai[] = {
 		.channels_min = 1,
 		.channels_max = 1,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9712_dai_ops_aux,
 }
 };
@@ -585,6 +585,8 @@ static int wm9712_reset(struct snd_soc_codec *codec, int try_warm)
 	}
 
 	soc_ac97_ops.reset(codec->ac97);
+	if (soc_ac97_ops.warm_reset)
+		soc_ac97_ops.warm_reset(codec->ac97);
 	if (ac97_read(codec, 0) != wm9712_reg[0])
 		goto err;
 	return 0;
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 523bad077fa..abed37acf78 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -189,6 +189,26 @@ SOC_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0),
 SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1),
 };
 
+static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w,
+				 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 status, rate;
+
+	BUG_ON(event != SND_SOC_DAPM_PRE_PMD);
+
+	/* Gracefully shut down the voice interface. */
+	status = ac97_read(codec, AC97_EXTENDED_MID) | 0x1000;
+	rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF;
+	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200);
+	schedule_timeout_interruptible(msecs_to_jiffies(1));
+	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00);
+	ac97_write(codec, AC97_EXTENDED_MID, status);
+
+	return 0;
+}
+
+
 /* We have to create a fake left and right HP mixers because
  * the codec only has a single control that is shared by both channels.
  * This makes it impossible to determine the audio path using the current
@@ -400,7 +420,8 @@ SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("HP Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
-SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1),
+SND_SOC_DAPM_DAC_E("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1,
+		   wm9713_voice_shutdown, SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1),
 SND_SOC_DAPM_PGA("Left ADC", AC97_EXTENDED_MID, 5, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Right ADC", AC97_EXTENDED_MID, 4, 1, NULL, 0),
@@ -689,7 +710,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
 	Ndiv = target / source;
 	if ((Ndiv < 5) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"WM9713 PLL N value %d out of recommended range!\n",
+			"WM9713 PLL N value %u out of recommended range!\n",
 			Ndiv);
 
 	pll_div->n = Ndiv;
@@ -936,21 +957,6 @@ static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static void wm9713_voiceshutdown(struct snd_pcm_substream *substream,
-				 struct snd_soc_dai *dai)
-{
-	struct snd_soc_codec *codec = dai->codec;
-	u16 status, rate;
-
-	/* Gracefully shut down the voice interface. */
-	status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000;
-	rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF;
-	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200);
-	schedule_timeout_interruptible(msecs_to_jiffies(1));
-	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00);
-	ac97_write(codec, AC97_EXTENDED_MID, status);
-}
-
 static int ac97_hifi_prepare(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
@@ -1019,7 +1025,6 @@ static struct snd_soc_dai_ops wm9713_dai_ops_aux = {
 
 static struct snd_soc_dai_ops wm9713_dai_ops_voice = {
 	.hw_params	= wm9713_pcm_hw_params,
-	.shutdown	= wm9713_voiceshutdown,
 	.set_clkdiv	= wm9713_set_dai_clkdiv,
 	.set_pll	= wm9713_set_dai_pll,
 	.set_fmt	= wm9713_set_dai_fmt,
@@ -1035,13 +1040,13 @@ struct snd_soc_dai wm9713_dai[] = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "HiFi Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9713_dai_ops_hifi,
 	},
 	{
@@ -1051,7 +1056,7 @@ struct snd_soc_dai wm9713_dai[] = {
 		.channels_min = 1,
 		.channels_max = 1,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9713_dai_ops_aux,
 	},
 	{
@@ -1069,6 +1074,7 @@ struct snd_soc_dai wm9713_dai[] = {
 		.rates = WM9713_PCM_RATES,
 		.formats = WM9713_PCM_FORMATS,},
 	.ops = &wm9713_dai_ops_voice,
+	.symmetric_rates = 1,
 	},
 };
 EXPORT_SYMBOL_GPL(wm9713_dai);
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 9fc90828337..5dbebf82249 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,5 +1,8 @@
 config SND_SOC_OF_SIMPLE
 	tristate
+	
+config SND_MPC52xx_DMA
+	tristate
 
 # ASoC platform support for the Freescale MPC8610 SOC.  This compiles drivers
 # for the SSI and the Elo DMA controller.  You will still need to select
@@ -22,7 +25,34 @@ config SND_SOC_MPC8610_HPCD
 config SND_SOC_MPC5200_I2S
 	tristate "Freescale MPC5200 PSC in I2S mode driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select SND_SOC_OF_SIMPLE
+	select SND_MPC52xx_DMA
 	select PPC_BESTCOMM_GEN_BD
 	help
 	  Say Y here to support the MPC5200 PSCs in I2S mode.
+
+config SND_SOC_MPC5200_AC97
+	tristate "Freescale MPC5200 PSC in AC97 mode driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select AC97_BUS
+	select SND_MPC52xx_DMA
+	select PPC_BESTCOMM_GEN_BD
+	help
+	  Say Y here to support the MPC5200 PSCs in AC97 mode.
+
+config SND_MPC52xx_SOC_PCM030
+	tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
+	depends on PPC_MPC5200_SIMPLE && BROKEN
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_WM9712
+	help
+	  Say Y if you want to add support for sound on the Phytec pcm030
+	  baseboard.
+
+config SND_MPC52xx_SOC_EFIKA
+	tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
+	depends on PPC_EFIKA && BROKEN
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_STAC9766
+	help
+	  Say Y if you want to add support for sound on the Efika.
+
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index f85134c8638..a83a73967ec 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -10,5 +10,12 @@ snd-soc-fsl-ssi-objs := fsl_ssi.o
 snd-soc-fsl-dma-objs := fsl_dma.o
 obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o
 
+# MPC5200 Platform Support
+obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
 obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o
+obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
+
+# MPC5200 Machine Support
+obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
+obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
 
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
new file mode 100644
index 00000000000..85b0e756950
--- /dev/null
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -0,0 +1,90 @@
+/*
+ * Efika driver for the PSC of the Freescale MPC52xx
+ * configured as AC97 interface
+ *
+ * Copyright 2008 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-of-simple.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+#include "../codecs/stac9766.h"
+
+static struct snd_soc_device device;
+static struct snd_soc_card card;
+
+static struct snd_soc_dai_link efika_fabric_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 Analog",
+	.codec_dai = &stac9766_dai[STAC9766_DAI_AC97_ANALOG],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL],
+},
+{
+	.name = "AC97",
+	.stream_name = "AC97 IEC958",
+	.codec_dai = &stac9766_dai[STAC9766_DAI_AC97_DIGITAL],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF],
+},
+};
+
+static __init int efika_fabric_init(void)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	if (!machine_is_compatible("bplan,efika"))
+		return -ENODEV;
+
+	card.platform = &mpc5200_audio_dma_platform;
+	card.name = "Efika";
+	card.dai_link = efika_fabric_dai;
+	card.num_links = ARRAY_SIZE(efika_fabric_dai);
+
+	device.card = &card;
+	device.codec_dev = &soc_codec_dev_stac9766;
+
+	pdev = platform_device_alloc("soc-audio", 1);
+	if (!pdev) {
+		pr_err("efika_fabric_init: platform_device_alloc() failed\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, &device);
+	device.dev = &pdev->dev;
+
+	rc = platform_device_add(pdev);
+	if (rc) {
+		pr_err("efika_fabric_init: platform_device_add() failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+module_init(efika_fabric_init);
+
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION(DRV_NAME ": mpc5200 Efika fabric driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 3711d8454d9..93f0f38a32c 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -375,18 +375,14 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		struct snd_pcm_runtime *first_runtime =
 			ssi_private->first_stream->runtime;
 
-		if (!first_runtime->rate || !first_runtime->sample_bits) {
+		if (!first_runtime->sample_bits) {
 			dev_err(substream->pcm->card->dev,
-				"set sample rate and size in %s stream first\n",
+				"set sample size in %s stream first\n",
 				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
 				? "capture" : "playback");
 			return -EAGAIN;
 		}
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-			SNDRV_PCM_HW_PARAM_RATE,
-			first_runtime->rate, first_runtime->rate);
-
 		/* If we're in synchronous mode, then we need to constrain
 		 * the sample size as well.  We don't support independent sample
 		 * rates in asynchronous mode.
@@ -674,7 +670,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info)
 	ssi_private->dev = ssi_info->dev;
 	ssi_private->asynchronous = ssi_info->asynchronous;
 
-	ssi_private->dev->driver_data = fsl_ssi_dai;
+	dev_set_drvdata(ssi_private->dev, fsl_ssi_dai);
 
 	/* Initialize the the device_attribute structure */
 	dev_attr->attr.name = "ssi-stats";
@@ -693,6 +689,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info)
 	fsl_ssi_dai->name = ssi_private->name;
 	fsl_ssi_dai->id = ssi_info->id;
 	fsl_ssi_dai->dev = ssi_info->dev;
+	fsl_ssi_dai->symmetric_rates = 1;
 
 	ret = snd_soc_register_dai(fsl_ssi_dai);
 	if (ret != 0) {
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
new file mode 100644
index 00000000000..efec33a1c5b
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -0,0 +1,564 @@
+/*
+ * Freescale MPC5200 PSC DMA
+ * ALSA SoC Platform driver
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <sound/soc.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/gen_bd.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+
+/*
+ * Interrupt handlers
+ */
+static irqreturn_t psc_dma_status_irq(int irq, void *_psc_dma)
+{
+	struct psc_dma *psc_dma = _psc_dma;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+	u16 isr;
+
+	isr = in_be16(&regs->mpc52xx_psc_isr);
+
+	/* Playback underrun error */
+	if (psc_dma->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP))
+		psc_dma->stats.underrun_count++;
+
+	/* Capture overrun error */
+	if (psc_dma->capture.active && (isr & MPC52xx_PSC_IMR_ORERR))
+		psc_dma->stats.overrun_count++;
+
+	out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * psc_dma_bcom_enqueue_next_buffer - Enqueue another audio buffer
+ * @s: pointer to stream private data structure
+ *
+ * Enqueues another audio period buffer into the bestcomm queue.
+ *
+ * Note: The routine must only be called when there is space available in
+ * the queue.  Otherwise the enqueue will fail and the audio ring buffer
+ * will get out of sync
+ */
+static void psc_dma_bcom_enqueue_next_buffer(struct psc_dma_stream *s)
+{
+	struct bcom_bd *bd;
+
+	/* Prepare and enqueue the next buffer descriptor */
+	bd = bcom_prepare_next_buffer(s->bcom_task);
+	bd->status = s->period_bytes;
+	bd->data[0] = s->period_next_pt;
+	bcom_submit_next_buffer(s->bcom_task, NULL);
+
+	/* Update for next period */
+	s->period_next_pt += s->period_bytes;
+	if (s->period_next_pt >= s->period_end)
+		s->period_next_pt = s->period_start;
+}
+
+static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s)
+{
+	while (s->appl_ptr < s->runtime->control->appl_ptr) {
+
+		if (bcom_queue_full(s->bcom_task))
+			return;
+
+		s->appl_ptr += s->period_size;
+
+		psc_dma_bcom_enqueue_next_buffer(s);
+	}
+}
+
+/* Bestcomm DMA irq handler */
+static irqreturn_t psc_dma_bcom_irq_tx(int irq, void *_psc_dma_stream)
+{
+	struct psc_dma_stream *s = _psc_dma_stream;
+
+	spin_lock(&s->psc_dma->lock);
+	/* For each finished period, dequeue the completed period buffer
+	 * and enqueue a new one in it's place. */
+	while (bcom_buffer_done(s->bcom_task)) {
+		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+
+		s->period_current_pt += s->period_bytes;
+		if (s->period_current_pt >= s->period_end)
+			s->period_current_pt = s->period_start;
+	}
+	psc_dma_bcom_enqueue_tx(s);
+	spin_unlock(&s->psc_dma->lock);
+
+	/* If the stream is active, then also inform the PCM middle layer
+	 * of the period finished event. */
+	if (s->active)
+		snd_pcm_period_elapsed(s->stream);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t psc_dma_bcom_irq_rx(int irq, void *_psc_dma_stream)
+{
+	struct psc_dma_stream *s = _psc_dma_stream;
+
+	spin_lock(&s->psc_dma->lock);
+	/* For each finished period, dequeue the completed period buffer
+	 * and enqueue a new one in it's place. */
+	while (bcom_buffer_done(s->bcom_task)) {
+		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+
+		s->period_current_pt += s->period_bytes;
+		if (s->period_current_pt >= s->period_end)
+			s->period_current_pt = s->period_start;
+
+		psc_dma_bcom_enqueue_next_buffer(s);
+	}
+	spin_unlock(&s->psc_dma->lock);
+
+	/* If the stream is active, then also inform the PCM middle layer
+	 * of the period finished event. */
+	if (s->active)
+		snd_pcm_period_elapsed(s->stream);
+
+	return IRQ_HANDLED;
+}
+
+static int psc_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+/**
+ * psc_dma_trigger: start and stop the DMA transfer.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the DMA
+ * transfer of data.
+ */
+static int psc_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct psc_dma_stream *s;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+	u16 imr;
+	unsigned long flags;
+	int i;
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	dev_dbg(psc_dma->dev, "psc_dma_trigger(substream=%p, cmd=%i)"
+		" stream_id=%i\n",
+		substream, cmd, substream->pstr->stream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		s->period_bytes = frames_to_bytes(runtime,
+						  runtime->period_size);
+		s->period_start = virt_to_phys(runtime->dma_area);
+		s->period_end = s->period_start +
+				(s->period_bytes * runtime->periods);
+		s->period_next_pt = s->period_start;
+		s->period_current_pt = s->period_start;
+		s->period_size = runtime->period_size;
+		s->active = 1;
+
+		/* track appl_ptr so that we have a better chance of detecting
+		 * end of stream and not over running it.
+		 */
+		s->runtime = runtime;
+		s->appl_ptr = s->runtime->control->appl_ptr -
+				(runtime->period_size * runtime->periods);
+
+		/* Fill up the bestcomm bd queue and enable DMA.
+		 * This will begin filling the PSC's fifo.
+		 */
+		spin_lock_irqsave(&psc_dma->lock, flags);
+
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+			bcom_gen_bd_rx_reset(s->bcom_task);
+			for (i = 0; i < runtime->periods; i++)
+				if (!bcom_queue_full(s->bcom_task))
+					psc_dma_bcom_enqueue_next_buffer(s);
+		} else {
+			bcom_gen_bd_tx_reset(s->bcom_task);
+			psc_dma_bcom_enqueue_tx(s);
+		}
+
+		bcom_enable(s->bcom_task);
+		spin_unlock_irqrestore(&psc_dma->lock, flags);
+
+		out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
+
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		s->active = 0;
+
+		spin_lock_irqsave(&psc_dma->lock, flags);
+		bcom_disable(s->bcom_task);
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+			bcom_gen_bd_rx_reset(s->bcom_task);
+		else
+			bcom_gen_bd_tx_reset(s->bcom_task);
+		spin_unlock_irqrestore(&psc_dma->lock, flags);
+
+		break;
+
+	default:
+		dev_dbg(psc_dma->dev, "invalid command\n");
+		return -EINVAL;
+	}
+
+	/* Update interrupt enable settings */
+	imr = 0;
+	if (psc_dma->playback.active)
+		imr |= MPC52xx_PSC_IMR_TXEMP;
+	if (psc_dma->capture.active)
+		imr |= MPC52xx_PSC_IMR_ORERR;
+	out_be16(&regs->isr_imr.imr, psc_dma->imr | imr);
+
+	return 0;
+}
+
+
+/* ---------------------------------------------------------------------
+ * The PSC DMA 'ASoC platform' driver
+ *
+ * Can be referenced by an 'ASoC machine' driver
+ * This driver only deals with the audio bus; it doesn't have any
+ * interaction with the attached codec
+ */
+
+static const struct snd_pcm_hardware psc_dma_hardware = {
+	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_BATCH,
+	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
+		SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
+	.rate_min = 8000,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.period_bytes_max	= 1024 * 1024,
+	.period_bytes_min	= 32,
+	.periods_min		= 2,
+	.periods_max		= 256,
+	.buffer_bytes_max	= 2 * 1024 * 1024,
+	.fifo_size		= 512,
+};
+
+static int psc_dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+	int rc;
+
+	dev_dbg(psc_dma->dev, "psc_dma_open(substream=%p)\n", substream);
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	snd_soc_set_runtime_hwparams(substream, &psc_dma_hardware);
+
+	rc = snd_pcm_hw_constraint_integer(runtime,
+		SNDRV_PCM_HW_PARAM_PERIODS);
+	if (rc < 0) {
+		dev_err(substream->pcm->card->dev, "invalid buffer size\n");
+		return rc;
+	}
+
+	s->stream = substream;
+	return 0;
+}
+
+static int psc_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+
+	dev_dbg(psc_dma->dev, "psc_dma_close(substream=%p)\n", substream);
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	if (!psc_dma->playback.active &&
+	    !psc_dma->capture.active) {
+
+		/* Disable all interrupts and reset the PSC */
+		out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+		out_8(&psc_dma->psc_regs->command, 4 << 4); /* reset error */
+	}
+	s->stream = NULL;
+	return 0;
+}
+
+static snd_pcm_uframes_t
+psc_dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+	dma_addr_t count;
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	count = s->period_current_pt - s->period_start;
+
+	return bytes_to_frames(substream->runtime, count);
+}
+
+static int
+psc_dma_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	return 0;
+}
+
+static struct snd_pcm_ops psc_dma_ops = {
+	.open		= psc_dma_open,
+	.close		= psc_dma_close,
+	.hw_free	= psc_dma_hw_free,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.pointer	= psc_dma_pointer,
+	.trigger	= psc_dma_trigger,
+	.hw_params	= psc_dma_hw_params,
+};
+
+static u64 psc_dma_dmamask = 0xffffffff;
+static int psc_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
+			   struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	size_t size = psc_dma_hardware.buffer_bytes_max;
+	int rc = 0;
+
+	dev_dbg(rtd->socdev->dev, "psc_dma_new(card=%p, dai=%p, pcm=%p)\n",
+		card, dai, pcm);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &psc_dma_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (pcm->streams[0].substream) {
+		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
+				size, &pcm->streams[0].substream->dma_buffer);
+		if (rc)
+			goto playback_alloc_err;
+	}
+
+	if (pcm->streams[1].substream) {
+		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
+				size, &pcm->streams[1].substream->dma_buffer);
+		if (rc)
+			goto capture_alloc_err;
+	}
+
+	if (rtd->socdev->card->codec->ac97)
+		rtd->socdev->card->codec->ac97->private_data = psc_dma;
+
+	return 0;
+
+ capture_alloc_err:
+	if (pcm->streams[0].substream)
+		snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
+
+ playback_alloc_err:
+	dev_err(card->dev, "Cannot allocate buffer(s)\n");
+
+	return -ENOMEM;
+}
+
+static void psc_dma_free(struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
+	struct snd_pcm_substream *substream;
+	int stream;
+
+	dev_dbg(rtd->socdev->dev, "psc_dma_free(pcm=%p)\n", pcm);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (substream) {
+			snd_dma_free_pages(&substream->dma_buffer);
+			substream->dma_buffer.area = NULL;
+			substream->dma_buffer.addr = 0;
+		}
+	}
+}
+
+struct snd_soc_platform mpc5200_audio_dma_platform = {
+	.name		= "mpc5200-psc-audio",
+	.pcm_ops	= &psc_dma_ops,
+	.pcm_new	= &psc_dma_new,
+	.pcm_free	= &psc_dma_free,
+};
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_platform);
+
+int mpc5200_audio_dma_create(struct of_device *op)
+{
+	phys_addr_t fifo;
+	struct psc_dma *psc_dma;
+	struct resource res;
+	int size, irq, rc;
+	const __be32 *prop;
+	void __iomem *regs;
+
+	/* Fetch the registers and IRQ of the PSC */
+	irq = irq_of_parse_and_map(op->node, 0);
+	if (of_address_to_resource(op->node, 0, &res)) {
+		dev_err(&op->dev, "Missing reg property\n");
+		return -ENODEV;
+	}
+	regs = ioremap(res.start, 1 + res.end - res.start);
+	if (!regs) {
+		dev_err(&op->dev, "Could not map registers\n");
+		return -ENODEV;
+	}
+
+	/* Allocate and initialize the driver private data */
+	psc_dma = kzalloc(sizeof *psc_dma, GFP_KERNEL);
+	if (!psc_dma) {
+		iounmap(regs);
+		return -ENOMEM;
+	}
+
+	/* Get the PSC ID */
+	prop = of_get_property(op->node, "cell-index", &size);
+	if (!prop || size < sizeof *prop)
+		return -ENODEV;
+
+	spin_lock_init(&psc_dma->lock);
+	psc_dma->id = be32_to_cpu(*prop);
+	psc_dma->irq = irq;
+	psc_dma->psc_regs = regs;
+	psc_dma->fifo_regs = regs + sizeof *psc_dma->psc_regs;
+	psc_dma->dev = &op->dev;
+	psc_dma->playback.psc_dma = psc_dma;
+	psc_dma->capture.psc_dma = psc_dma;
+	snprintf(psc_dma->name, sizeof psc_dma->name, "PSC%u", psc_dma->id);
+
+	/* Find the address of the fifo data registers and setup the
+	 * DMA tasks */
+	fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32);
+	psc_dma->capture.bcom_task =
+		bcom_psc_gen_bd_rx_init(psc_dma->id, 10, fifo, 512);
+	psc_dma->playback.bcom_task =
+		bcom_psc_gen_bd_tx_init(psc_dma->id, 10, fifo);
+	if (!psc_dma->capture.bcom_task ||
+	    !psc_dma->playback.bcom_task) {
+		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
+		iounmap(regs);
+		kfree(psc_dma);
+		return -ENODEV;
+	}
+
+	/* Disable all interrupts and reset the PSC */
+	out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+	 /* reset receiver */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_RX);
+	 /* reset transmitter */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_TX);
+	 /* reset error */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_ERR_STAT);
+	 /* reset mode */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_SEL_MODE_REG_1);
+
+	/* Set up mode register;
+	 * First write: RxRdy (FIFO Alarm) generates rx FIFO irq
+	 * Second write: register Normal mode for non loopback
+	 */
+	out_8(&psc_dma->psc_regs->mode, 0);
+	out_8(&psc_dma->psc_regs->mode, 0);
+
+	/* Set the TX and RX fifo alarm thresholds */
+	out_be16(&psc_dma->fifo_regs->rfalarm, 0x100);
+	out_8(&psc_dma->fifo_regs->rfcntl, 0x4);
+	out_be16(&psc_dma->fifo_regs->tfalarm, 0x100);
+	out_8(&psc_dma->fifo_regs->tfcntl, 0x7);
+
+	/* Lookup the IRQ numbers */
+	psc_dma->playback.irq =
+		bcom_get_task_irq(psc_dma->playback.bcom_task);
+	psc_dma->capture.irq =
+		bcom_get_task_irq(psc_dma->capture.bcom_task);
+
+	rc = request_irq(psc_dma->irq, &psc_dma_status_irq, IRQF_SHARED,
+			 "psc-dma-status", psc_dma);
+	rc |= request_irq(psc_dma->capture.irq,
+			  &psc_dma_bcom_irq_rx, IRQF_SHARED,
+			  "psc-dma-capture", &psc_dma->capture);
+	rc |= request_irq(psc_dma->playback.irq,
+			  &psc_dma_bcom_irq_tx, IRQF_SHARED,
+			  "psc-dma-playback", &psc_dma->playback);
+	if (rc) {
+		free_irq(psc_dma->irq, psc_dma);
+		free_irq(psc_dma->capture.irq,
+			 &psc_dma->capture);
+		free_irq(psc_dma->playback.irq,
+			 &psc_dma->playback);
+		return -ENODEV;
+	}
+
+	/* Save what we've done so it can be found again later */
+	dev_set_drvdata(&op->dev, psc_dma);
+
+	/* Tell the ASoC OF helpers about it */
+	return snd_soc_register_platform(&mpc5200_audio_dma_platform);
+}
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_create);
+
+int mpc5200_audio_dma_destroy(struct of_device *op)
+{
+	struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
+
+	dev_dbg(&op->dev, "mpc5200_audio_dma_destroy()\n");
+
+	snd_soc_unregister_platform(&mpc5200_audio_dma_platform);
+
+	bcom_gen_bd_rx_release(psc_dma->capture.bcom_task);
+	bcom_gen_bd_tx_release(psc_dma->playback.bcom_task);
+
+	/* Release irqs */
+	free_irq(psc_dma->irq, psc_dma);
+	free_irq(psc_dma->capture.irq, &psc_dma->capture);
+	free_irq(psc_dma->playback.irq, &psc_dma->playback);
+
+	iounmap(psc_dma->psc_regs);
+	kfree(psc_dma);
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_destroy);
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in DMA mode ASoC Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
new file mode 100644
index 00000000000..2000803f06a
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -0,0 +1,80 @@
+/*
+ * Freescale MPC5200 Audio DMA driver
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC5200_DMA_H__
+#define __SOUND_SOC_FSL_MPC5200_DMA_H__
+
+#define PSC_STREAM_NAME_LEN 32
+
+/**
+ * psc_ac97_stream - Data specific to a single stream (playback or capture)
+ * @active:		flag indicating if the stream is active
+ * @psc_dma:		pointer back to parent psc_dma data structure
+ * @bcom_task:		bestcomm task structure
+ * @irq:		irq number for bestcomm task
+ * @period_start:	physical address of start of DMA region
+ * @period_end:		physical address of end of DMA region
+ * @period_next_pt:	physical address of next DMA buffer to enqueue
+ * @period_bytes:	size of DMA period in bytes
+ */
+struct psc_dma_stream {
+	struct snd_pcm_runtime *runtime;
+	snd_pcm_uframes_t appl_ptr;
+
+	int active;
+	struct psc_dma *psc_dma;
+	struct bcom_task *bcom_task;
+	int irq;
+	struct snd_pcm_substream *stream;
+	dma_addr_t period_start;
+	dma_addr_t period_end;
+	dma_addr_t period_next_pt;
+	dma_addr_t period_current_pt;
+	int period_bytes;
+	int period_size;
+};
+
+/**
+ * psc_dma - Private driver data
+ * @name: short name for this device ("PSC0", "PSC1", etc)
+ * @psc_regs: pointer to the PSC's registers
+ * @fifo_regs: pointer to the PSC's FIFO registers
+ * @irq: IRQ of this PSC
+ * @dev: struct device pointer
+ * @dai: the CPU DAI for this device
+ * @sicr: Base value used in serial interface control register; mode is ORed
+ *        with this value.
+ * @playback: Playback stream context data
+ * @capture: Capture stream context data
+ */
+struct psc_dma {
+	char name[32];
+	struct mpc52xx_psc __iomem *psc_regs;
+	struct mpc52xx_psc_fifo __iomem *fifo_regs;
+	unsigned int irq;
+	struct device *dev;
+	spinlock_t lock;
+	u32 sicr;
+	uint sysclk;
+	int imr;
+	int id;
+	unsigned int slots;
+
+	/* per-stream data */
+	struct psc_dma_stream playback;
+	struct psc_dma_stream capture;
+
+	/* Statistics */
+	struct {
+		unsigned long overrun_count;
+		unsigned long underrun_count;
+	} stats;
+};
+
+int mpc5200_audio_dma_create(struct of_device *op);
+int mpc5200_audio_dma_destroy(struct of_device *op);
+
+extern struct snd_soc_platform mpc5200_audio_dma_platform;
+
+#endif /* __SOUND_SOC_FSL_MPC5200_DMA_H__ */
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
new file mode 100644
index 00000000000..794a247b3eb
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -0,0 +1,329 @@
+/*
+ * linux/sound/mpc5200-ac97.c -- AC97 support for the Freescale MPC52xx chip.
+ *
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/time.h>
+#include <asm/delay.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+
+#define DRV_NAME "mpc5200-psc-ac97"
+
+/* ALSA only supports a single AC97 device so static is recommend here */
+static struct psc_dma *psc_dma;
+
+static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
+{
+	int status;
+	unsigned int val;
+
+	/* Wait for command send status zero = ready */
+	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_CMDSEND), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 bus (rdy)\n");
+		return -ENODEV;
+	}
+	/* Send the read */
+	out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
+
+	/* Wait for the answer */
+	status = spin_event_timeout((in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_DATA_VAL), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 read (val) %x\n",
+				in_be16(&psc_dma->psc_regs->sr_csr.status));
+		return -ENODEV;
+	}
+	/* Get the data */
+	val = in_be32(&psc_dma->psc_regs->ac97_data);
+	if (((val >> 24) & 0x7f) != reg) {
+		pr_err("reg echo error on ac97 read\n");
+		return -ENODEV;
+	}
+	val = (val >> 8) & 0xffff;
+
+	return (unsigned short) val;
+}
+
+static void psc_ac97_write(struct snd_ac97 *ac97,
+				unsigned short reg, unsigned short val)
+{
+	int status;
+
+	/* Wait for command status zero = ready */
+	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_CMDSEND), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 bus (write)\n");
+		return;
+	}
+	/* Write data */
+	out_be32(&psc_dma->psc_regs->ac97_cmd,
+			((reg & 0x7f) << 24) | (val << 8));
+}
+
+static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
+	udelay(3);
+	out_be32(&regs->sicr, psc_dma->sicr);
+}
+
+static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	/* Do a cold reset */
+	out_8(&regs->op1, MPC52xx_PSC_OP_RES);
+	udelay(10);
+	out_8(&regs->op0, MPC52xx_PSC_OP_RES);
+	udelay(50);
+	psc_ac97_warm_reset(ac97);
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= psc_ac97_read,
+	.write		= psc_ac97_write,
+	.reset		= psc_ac97_cold_reset,
+	.warm_reset	= psc_ac97_warm_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int psc_ac97_hw_analog_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+		" periods=%i buffer_size=%i  buffer_bytes=%i channels=%i"
+		" rate=%i format=%i\n",
+		__func__, substream, params_period_size(params),
+		params_period_bytes(params), params_periods(params),
+		params_buffer_size(params), params_buffer_bytes(params),
+		params_channels(params), params_rate(params),
+		params_format(params));
+
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+		if (params_channels(params) == 1)
+			psc_dma->slots |= 0x00000100;
+		else
+			psc_dma->slots |= 0x00000300;
+	} else {
+		if (params_channels(params) == 1)
+			psc_dma->slots |= 0x01000000;
+		else
+			psc_dma->slots |= 0x03000000;
+	}
+	out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+
+	return 0;
+}
+
+static int psc_ac97_hw_digital_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+
+	if (params_channels(params) == 1)
+		out_be32(&psc_dma->psc_regs->ac97_slots, 0x01000000);
+	else
+		out_be32(&psc_dma->psc_regs->ac97_slots, 0x03000000);
+
+	return 0;
+}
+
+static int psc_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+							struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_STOP:
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+			psc_dma->slots &= 0xFFFF0000;
+		else
+			psc_dma->slots &= 0x0000FFFF;
+
+		out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+		break;
+	}
+	return 0;
+}
+
+static int psc_ac97_probe(struct platform_device *pdev,
+					struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	/* Go */
+	out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * ALSA SoC Bindings
+ *
+ * - Digital Audio Interface (DAI) template
+ * - create/destroy dai hooks
+ */
+
+/**
+ * psc_ac97_dai_template: template CPU Digital Audio Interface
+ */
+static struct snd_soc_dai_ops psc_ac97_analog_ops = {
+	.hw_params	= psc_ac97_hw_analog_params,
+	.trigger	= psc_ac97_trigger,
+};
+
+static struct snd_soc_dai_ops psc_ac97_digital_ops = {
+	.hw_params	= psc_ac97_hw_digital_params,
+};
+
+struct snd_soc_dai psc_ac97_dai[] = {
+{
+	.name   = "AC97",
+	.ac97_control = 1,
+	.probe	= psc_ac97_probe,
+	.playback = {
+		.channels_min   = 1,
+		.channels_max   = 6,
+		.rates          = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_BE,
+	},
+	.capture = {
+		.channels_min   = 1,
+		.channels_max   = 2,
+		.rates          = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_BE,
+	},
+	.ops = &psc_ac97_analog_ops,
+},
+{
+	.name   = "SPDIF",
+	.ac97_control = 1,
+	.playback = {
+		.channels_min   = 1,
+		.channels_max   = 2,
+		.rates          = SNDRV_PCM_RATE_32000 | \
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
+	},
+	.ops = &psc_ac97_digital_ops,
+} };
+EXPORT_SYMBOL_GPL(psc_ac97_dai);
+
+
+
+/* ---------------------------------------------------------------------
+ * OF platform bus binding code:
+ * - Probe/remove operations
+ * - OF device match table
+ */
+static int __devinit psc_ac97_of_probe(struct of_device *op,
+				      const struct of_device_id *match)
+{
+	int rc, i;
+	struct snd_ac97 ac97;
+	struct mpc52xx_psc __iomem *regs;
+
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
+
+	for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
+		psc_ac97_dai[i].dev = &op->dev;
+
+	rc = snd_soc_register_dais(psc_ac97_dai, ARRAY_SIZE(psc_ac97_dai));
+	if (rc != 0) {
+		dev_err(&op->dev, "Failed to register DAI\n");
+		return rc;
+	}
+
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
+	ac97.private_data = psc_dma;
+
+	for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
+		psc_ac97_dai[i].private_data = psc_dma;
+
+	psc_dma->imr = 0;
+	out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+
+	/* Configure the serial interface mode to AC97 */
+	psc_dma->sicr = MPC52xx_PSC_SICR_SIM_AC97 | MPC52xx_PSC_SICR_ENAC97;
+	out_be32(&regs->sicr, psc_dma->sicr);
+
+	/* No slots active */
+	out_be32(&regs->ac97_slots, 0x00000000);
+
+	return 0;
+}
+
+static int __devexit psc_ac97_of_remove(struct of_device *op)
+{
+	return mpc5200_audio_dma_destroy(op);
+}
+
+/* Match table for of_platform binding */
+static struct of_device_id psc_ac97_match[] __devinitdata = {
+	{ .compatible = "fsl,mpc5200-psc-ac97", },
+	{ .compatible = "fsl,mpc5200b-psc-ac97", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, psc_ac97_match);
+
+static struct of_platform_driver psc_ac97_driver = {
+	.match_table = psc_ac97_match,
+	.probe = psc_ac97_of_probe,
+	.remove = __devexit_p(psc_ac97_of_remove),
+	.driver = {
+		.name = "mpc5200-psc-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+/* ---------------------------------------------------------------------
+ * Module setup and teardown; simply register the of_platform driver
+ * for the PSC in AC97 mode.
+ */
+static int __init psc_ac97_init(void)
+{
+	return of_register_platform_driver(&psc_ac97_driver);
+}
+module_init(psc_ac97_init);
+
+static void __exit psc_ac97_exit(void)
+{
+	of_unregister_platform_driver(&psc_ac97_driver);
+}
+module_exit(psc_ac97_exit);
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION("mpc5200 AC97 module");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.h b/sound/soc/fsl/mpc5200_psc_ac97.h
new file mode 100644
index 00000000000..4bc18c35c36
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_ac97.h
@@ -0,0 +1,15 @@
+/*
+ * Freescale MPC5200 PSC in AC97 mode
+ * ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
+#define __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
+
+extern struct snd_soc_dai psc_ac97_dai[];
+
+#define MPC5200_AC97_NORMAL 0
+#define MPC5200_AC97_SPDIF 1
+
+#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ */
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 1111c710118..ce8de90fb94 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -3,31 +3,21 @@
  * ALSA SoC Digital Audio Interface (DAI) driver
  *
  * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
 
-#include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/initval.h>
 #include <sound/soc.h>
-#include <sound/soc-of-simple.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
 #include <asm/mpc52xx_psc.h>
 
-MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
-MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
-MODULE_LICENSE("GPL");
+#include "mpc5200_psc_i2s.h"
+#include "mpc5200_dma.h"
 
 /**
  * PSC_I2S_RATES: sample rates supported by the I2S
@@ -44,191 +34,17 @@ MODULE_LICENSE("GPL");
  * PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode
  */
 #define PSC_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \
-			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE | \
-			 SNDRV_PCM_FMTBIT_S32_BE)
-
-/**
- * psc_i2s_stream - Data specific to a single stream (playback or capture)
- * @active:		flag indicating if the stream is active
- * @psc_i2s:		pointer back to parent psc_i2s data structure
- * @bcom_task:		bestcomm task structure
- * @irq:		irq number for bestcomm task
- * @period_start:	physical address of start of DMA region
- * @period_end:		physical address of end of DMA region
- * @period_next_pt:	physical address of next DMA buffer to enqueue
- * @period_bytes:	size of DMA period in bytes
- */
-struct psc_i2s_stream {
-	int active;
-	struct psc_i2s *psc_i2s;
-	struct bcom_task *bcom_task;
-	int irq;
-	struct snd_pcm_substream *stream;
-	dma_addr_t period_start;
-	dma_addr_t period_end;
-	dma_addr_t period_next_pt;
-	dma_addr_t period_current_pt;
-	int period_bytes;
-};
-
-/**
- * psc_i2s - Private driver data
- * @name: short name for this device ("PSC0", "PSC1", etc)
- * @psc_regs: pointer to the PSC's registers
- * @fifo_regs: pointer to the PSC's FIFO registers
- * @irq: IRQ of this PSC
- * @dev: struct device pointer
- * @dai: the CPU DAI for this device
- * @sicr: Base value used in serial interface control register; mode is ORed
- *        with this value.
- * @playback: Playback stream context data
- * @capture: Capture stream context data
- */
-struct psc_i2s {
-	char name[32];
-	struct mpc52xx_psc __iomem *psc_regs;
-	struct mpc52xx_psc_fifo __iomem *fifo_regs;
-	unsigned int irq;
-	struct device *dev;
-	struct snd_soc_dai dai;
-	spinlock_t lock;
-	u32 sicr;
-
-	/* per-stream data */
-	struct psc_i2s_stream playback;
-	struct psc_i2s_stream capture;
-
-	/* Statistics */
-	struct {
-		int overrun_count;
-		int underrun_count;
-	} stats;
-};
-
-/*
- * Interrupt handlers
- */
-static irqreturn_t psc_i2s_status_irq(int irq, void *_psc_i2s)
-{
-	struct psc_i2s *psc_i2s = _psc_i2s;
-	struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
-	u16 isr;
-
-	isr = in_be16(&regs->mpc52xx_psc_isr);
-
-	/* Playback underrun error */
-	if (psc_i2s->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP))
-		psc_i2s->stats.underrun_count++;
-
-	/* Capture overrun error */
-	if (psc_i2s->capture.active && (isr & MPC52xx_PSC_IMR_ORERR))
-		psc_i2s->stats.overrun_count++;
-
-	out_8(&regs->command, 4 << 4);	/* reset the error status */
-
-	return IRQ_HANDLED;
-}
-
-/**
- * psc_i2s_bcom_enqueue_next_buffer - Enqueue another audio buffer
- * @s: pointer to stream private data structure
- *
- * Enqueues another audio period buffer into the bestcomm queue.
- *
- * Note: The routine must only be called when there is space available in
- * the queue.  Otherwise the enqueue will fail and the audio ring buffer
- * will get out of sync
- */
-static void psc_i2s_bcom_enqueue_next_buffer(struct psc_i2s_stream *s)
-{
-	struct bcom_bd *bd;
-
-	/* Prepare and enqueue the next buffer descriptor */
-	bd = bcom_prepare_next_buffer(s->bcom_task);
-	bd->status = s->period_bytes;
-	bd->data[0] = s->period_next_pt;
-	bcom_submit_next_buffer(s->bcom_task, NULL);
-
-	/* Update for next period */
-	s->period_next_pt += s->period_bytes;
-	if (s->period_next_pt >= s->period_end)
-		s->period_next_pt = s->period_start;
-}
-
-/* Bestcomm DMA irq handler */
-static irqreturn_t psc_i2s_bcom_irq(int irq, void *_psc_i2s_stream)
-{
-	struct psc_i2s_stream *s = _psc_i2s_stream;
-
-	/* For each finished period, dequeue the completed period buffer
-	 * and enqueue a new one in it's place. */
-	while (bcom_buffer_done(s->bcom_task)) {
-		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-		s->period_current_pt += s->period_bytes;
-		if (s->period_current_pt >= s->period_end)
-			s->period_current_pt = s->period_start;
-		psc_i2s_bcom_enqueue_next_buffer(s);
-		bcom_enable(s->bcom_task);
-	}
-
-	/* If the stream is active, then also inform the PCM middle layer
-	 * of the period finished event. */
-	if (s->active)
-		snd_pcm_period_elapsed(s->stream);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * psc_i2s_startup: create a new substream
- *
- * This is the first function called when a stream is opened.
- *
- * If this is the first stream open, then grab the IRQ and program most of
- * the PSC registers.
- */
-static int psc_i2s_startup(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	int rc;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_startup(substream=%p)\n", substream);
-
-	if (!psc_i2s->playback.active &&
-	    !psc_i2s->capture.active) {
-		/* Setup the IRQs */
-		rc = request_irq(psc_i2s->irq, &psc_i2s_status_irq, IRQF_SHARED,
-				 "psc-i2s-status", psc_i2s);
-		rc |= request_irq(psc_i2s->capture.irq,
-				  &psc_i2s_bcom_irq, IRQF_SHARED,
-				  "psc-i2s-capture", &psc_i2s->capture);
-		rc |= request_irq(psc_i2s->playback.irq,
-				  &psc_i2s_bcom_irq, IRQF_SHARED,
-				  "psc-i2s-playback", &psc_i2s->playback);
-		if (rc) {
-			free_irq(psc_i2s->irq, psc_i2s);
-			free_irq(psc_i2s->capture.irq,
-				 &psc_i2s->capture);
-			free_irq(psc_i2s->playback.irq,
-				 &psc_i2s->playback);
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
+			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
 
 static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
 	u32 mode;
 
-	dev_dbg(psc_i2s->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
 		" periods=%i buffer_size=%i  buffer_bytes=%i\n",
 		__func__, substream, params_period_size(params),
 		params_period_bytes(params), params_periods(params),
@@ -248,175 +64,15 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
 		mode = MPC52xx_PSC_SICR_SIM_CODEC_32;
 		break;
 	default:
-		dev_dbg(psc_i2s->dev, "invalid format\n");
-		return -EINVAL;
-	}
-	out_be32(&psc_i2s->psc_regs->sicr, psc_i2s->sicr | mode);
-
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
-	return 0;
-}
-
-static int psc_i2s_hw_free(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	snd_pcm_set_runtime_buffer(substream, NULL);
-	return 0;
-}
-
-/**
- * psc_i2s_trigger: start and stop the DMA transfer.
- *
- * This function is called by ALSA to start, stop, pause, and resume the DMA
- * transfer of data.
- */
-static int psc_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-			   struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct psc_i2s_stream *s;
-	struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
-	u16 imr;
-	u8 psc_cmd;
-	unsigned long flags;
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_trigger(substream=%p, cmd=%i)"
-		" stream_id=%i\n",
-		substream, cmd, substream->pstr->stream);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		s->period_bytes = frames_to_bytes(runtime,
-						  runtime->period_size);
-		s->period_start = virt_to_phys(runtime->dma_area);
-		s->period_end = s->period_start +
-				(s->period_bytes * runtime->periods);
-		s->period_next_pt = s->period_start;
-		s->period_current_pt = s->period_start;
-		s->active = 1;
-
-		/* First; reset everything */
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-			out_8(&regs->command, MPC52xx_PSC_RST_RX);
-			out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
-		} else {
-			out_8(&regs->command, MPC52xx_PSC_RST_TX);
-			out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
-		}
-
-		/* Next, fill up the bestcomm bd queue and enable DMA.
-		 * This will begin filling the PSC's fifo. */
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-			bcom_gen_bd_rx_reset(s->bcom_task);
-		else
-			bcom_gen_bd_tx_reset(s->bcom_task);
-		while (!bcom_queue_full(s->bcom_task))
-			psc_i2s_bcom_enqueue_next_buffer(s);
-		bcom_enable(s->bcom_task);
-
-		/* Due to errata in the i2s mode; need to line up enabling
-		 * the transmitter with a transition on the frame sync
-		 * line */
-
-		spin_lock_irqsave(&psc_i2s->lock, flags);
-		/* first make sure it is low */
-		while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
-			;
-		/* then wait for the transition to high */
-		while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
-			;
-		/* Finally, enable the PSC.
-		 * Receiver must always be enabled; even when we only want
-		 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
-		psc_cmd = MPC52xx_PSC_RX_ENABLE;
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			psc_cmd |= MPC52xx_PSC_TX_ENABLE;
-		out_8(&regs->command, psc_cmd);
-		spin_unlock_irqrestore(&psc_i2s->lock, flags);
-
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-		/* Turn off the PSC */
-		s->active = 0;
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-			if (!psc_i2s->playback.active) {
-				out_8(&regs->command, 2 << 4);	/* reset rx */
-				out_8(&regs->command, 3 << 4);	/* reset tx */
-				out_8(&regs->command, 4 << 4);	/* reset err */
-			}
-		} else {
-			out_8(&regs->command, 3 << 4);	/* reset tx */
-			out_8(&regs->command, 4 << 4);	/* reset err */
-			if (!psc_i2s->capture.active)
-				out_8(&regs->command, 2 << 4);	/* reset rx */
-		}
-
-		bcom_disable(s->bcom_task);
-		while (!bcom_queue_empty(s->bcom_task))
-			bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-
-		break;
-
-	default:
-		dev_dbg(psc_i2s->dev, "invalid command\n");
+		dev_dbg(psc_dma->dev, "invalid format\n");
 		return -EINVAL;
 	}
-
-	/* Update interrupt enable settings */
-	imr = 0;
-	if (psc_i2s->playback.active)
-		imr |= MPC52xx_PSC_IMR_TXEMP;
-	if (psc_i2s->capture.active)
-		imr |= MPC52xx_PSC_IMR_ORERR;
-	out_be16(&regs->isr_imr.imr, imr);
+	out_be32(&psc_dma->psc_regs->sicr, psc_dma->sicr | mode);
 
 	return 0;
 }
 
 /**
- * psc_i2s_shutdown: shutdown the data transfer on a stream
- *
- * Shutdown the PSC if there are no other substreams open.
- */
-static void psc_i2s_shutdown(struct snd_pcm_substream *substream,
-			     struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_shutdown(substream=%p)\n", substream);
-
-	/*
-	 * If this is the last active substream, disable the PSC and release
-	 * the IRQ.
-	 */
-	if (!psc_i2s->playback.active &&
-	    !psc_i2s->capture.active) {
-
-		/* Disable all interrupts and reset the PSC */
-		out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0);
-		out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset tx */
-		out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset rx */
-		out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */
-		out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */
-
-		/* Release irqs */
-		free_irq(psc_i2s->irq, psc_i2s);
-		free_irq(psc_i2s->capture.irq, &psc_i2s->capture);
-		free_irq(psc_i2s->playback.irq, &psc_i2s->playback);
-	}
-}
-
-/**
  * psc_i2s_set_sysclk: set the clock frequency and direction
  *
  * This function is called by the machine driver to tell us what the clock
@@ -433,8 +89,8 @@ static void psc_i2s_shutdown(struct snd_pcm_substream *substream,
 static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
 			      int clk_id, unsigned int freq, int dir)
 {
-	struct psc_i2s *psc_i2s = cpu_dai->private_data;
-	dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	dev_dbg(psc_dma->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
 				cpu_dai, dir);
 	return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
 }
@@ -452,8 +108,8 @@ static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
  */
 static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
 {
-	struct psc_i2s *psc_i2s = cpu_dai->private_data;
-	dev_dbg(psc_i2s->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	dev_dbg(psc_dma->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
 				cpu_dai, format);
 	return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL;
 }
@@ -469,16 +125,13 @@ static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
  * psc_i2s_dai_template: template CPU Digital Audio Interface
  */
 static struct snd_soc_dai_ops psc_i2s_dai_ops = {
-	.startup	= psc_i2s_startup,
 	.hw_params	= psc_i2s_hw_params,
-	.hw_free	= psc_i2s_hw_free,
-	.shutdown	= psc_i2s_shutdown,
-	.trigger	= psc_i2s_trigger,
 	.set_sysclk	= psc_i2s_set_sysclk,
 	.set_fmt	= psc_i2s_set_fmt,
 };
 
-static struct snd_soc_dai psc_i2s_dai_template = {
+struct snd_soc_dai psc_i2s_dai[] = {{
+	.name   = "I2S",
 	.playback = {
 		.channels_min = 2,
 		.channels_max = 2,
@@ -492,223 +145,8 @@ static struct snd_soc_dai psc_i2s_dai_template = {
 		.formats = PSC_I2S_FORMATS,
 	},
 	.ops = &psc_i2s_dai_ops,
-};
-
-/* ---------------------------------------------------------------------
- * The PSC I2S 'ASoC platform' driver
- *
- * Can be referenced by an 'ASoC machine' driver
- * This driver only deals with the audio bus; it doesn't have any
- * interaction with the attached codec
- */
-
-static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
-	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
-		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_BATCH,
-	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
-		   SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
-	.rate_min = 8000,
-	.rate_max = 48000,
-	.channels_min = 2,
-	.channels_max = 2,
-	.period_bytes_max	= 1024 * 1024,
-	.period_bytes_min	= 32,
-	.periods_min		= 2,
-	.periods_max		= 256,
-	.buffer_bytes_max	= 2 * 1024 * 1024,
-	.fifo_size		= 0,
-};
-
-static int psc_i2s_pcm_open(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_pcm_open(substream=%p)\n", substream);
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	snd_soc_set_runtime_hwparams(substream, &psc_i2s_pcm_hardware);
-
-	s->stream = substream;
-	return 0;
-}
-
-static int psc_i2s_pcm_close(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_pcm_close(substream=%p)\n", substream);
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	s->stream = NULL;
-	return 0;
-}
-
-static snd_pcm_uframes_t
-psc_i2s_pcm_pointer(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-	dma_addr_t count;
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	count = s->period_current_pt - s->period_start;
-
-	return bytes_to_frames(substream->runtime, count);
-}
-
-static struct snd_pcm_ops psc_i2s_pcm_ops = {
-	.open		= psc_i2s_pcm_open,
-	.close		= psc_i2s_pcm_close,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.pointer	= psc_i2s_pcm_pointer,
-};
-
-static u64 psc_i2s_pcm_dmamask = 0xffffffff;
-static int psc_i2s_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
-			   struct snd_pcm *pcm)
-{
-	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
-	size_t size = psc_i2s_pcm_hardware.buffer_bytes_max;
-	int rc = 0;
-
-	dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_new(card=%p, dai=%p, pcm=%p)\n",
-		card, dai, pcm);
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &psc_i2s_pcm_dmamask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = 0xffffffff;
-
-	if (pcm->streams[0].substream) {
-		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size,
-					&pcm->streams[0].substream->dma_buffer);
-		if (rc)
-			goto playback_alloc_err;
-	}
-
-	if (pcm->streams[1].substream) {
-		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size,
-					&pcm->streams[1].substream->dma_buffer);
-		if (rc)
-			goto capture_alloc_err;
-	}
-
-	return 0;
-
- capture_alloc_err:
-	if (pcm->streams[0].substream)
-		snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
- playback_alloc_err:
-	dev_err(card->dev, "Cannot allocate buffer(s)\n");
-	return -ENOMEM;
-}
-
-static void psc_i2s_pcm_free(struct snd_pcm *pcm)
-{
-	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
-	struct snd_pcm_substream *substream;
-	int stream;
-
-	dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_free(pcm=%p)\n", pcm);
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (substream) {
-			snd_dma_free_pages(&substream->dma_buffer);
-			substream->dma_buffer.area = NULL;
-			substream->dma_buffer.addr = 0;
-		}
-	}
-}
-
-struct snd_soc_platform psc_i2s_pcm_soc_platform = {
-	.name		= "mpc5200-psc-audio",
-	.pcm_ops	= &psc_i2s_pcm_ops,
-	.pcm_new	= &psc_i2s_pcm_new,
-	.pcm_free	= &psc_i2s_pcm_free,
-};
-
-/* ---------------------------------------------------------------------
- * Sysfs attributes for debugging
- */
-
-static ssize_t psc_i2s_status_show(struct device *dev,
-			   struct device_attribute *attr, char *buf)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-
-	return sprintf(buf, "status=%.4x sicr=%.8x rfnum=%i rfstat=0x%.4x "
-			"tfnum=%i tfstat=0x%.4x\n",
-			in_be16(&psc_i2s->psc_regs->sr_csr.status),
-			in_be32(&psc_i2s->psc_regs->sicr),
-			in_be16(&psc_i2s->fifo_regs->rfnum) & 0x1ff,
-			in_be16(&psc_i2s->fifo_regs->rfstat),
-			in_be16(&psc_i2s->fifo_regs->tfnum) & 0x1ff,
-			in_be16(&psc_i2s->fifo_regs->tfstat));
-}
-
-static int *psc_i2s_get_stat_attr(struct psc_i2s *psc_i2s, const char *name)
-{
-	if (strcmp(name, "playback_underrun") == 0)
-		return &psc_i2s->stats.underrun_count;
-	if (strcmp(name, "capture_overrun") == 0)
-		return &psc_i2s->stats.overrun_count;
-
-	return NULL;
-}
-
-static ssize_t psc_i2s_stat_show(struct device *dev,
-				 struct device_attribute *attr, char *buf)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-	int *attrib;
-
-	attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name);
-	if (!attrib)
-		return 0;
-
-	return sprintf(buf, "%i\n", *attrib);
-}
-
-static ssize_t psc_i2s_stat_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf,
-				  size_t count)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-	int *attrib;
-
-	attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name);
-	if (!attrib)
-		return 0;
-
-	*attrib = simple_strtoul(buf, NULL, 0);
-	return count;
-}
-
-static DEVICE_ATTR(status, 0644, psc_i2s_status_show, NULL);
-static DEVICE_ATTR(playback_underrun, 0644, psc_i2s_stat_show,
-			psc_i2s_stat_store);
-static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show,
-			psc_i2s_stat_store);
+} };
+EXPORT_SYMBOL_GPL(psc_i2s_dai);
 
 /* ---------------------------------------------------------------------
  * OF platform bus binding code:
@@ -718,150 +156,65 @@ static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show,
 static int __devinit psc_i2s_of_probe(struct of_device *op,
 				      const struct of_device_id *match)
 {
-	phys_addr_t fifo;
-	struct psc_i2s *psc_i2s;
-	struct resource res;
-	int size, psc_id, irq, rc;
-	const __be32 *prop;
-	void __iomem *regs;
-
-	dev_dbg(&op->dev, "probing psc i2s device\n");
-
-	/* Get the PSC ID */
-	prop = of_get_property(op->node, "cell-index", &size);
-	if (!prop || size < sizeof *prop)
-		return -ENODEV;
-	psc_id = be32_to_cpu(*prop);
-
-	/* Fetch the registers and IRQ of the PSC */
-	irq = irq_of_parse_and_map(op->node, 0);
-	if (of_address_to_resource(op->node, 0, &res)) {
-		dev_err(&op->dev, "Missing reg property\n");
-		return -ENODEV;
-	}
-	regs = ioremap(res.start, 1 + res.end - res.start);
-	if (!regs) {
-		dev_err(&op->dev, "Could not map registers\n");
-		return -ENODEV;
-	}
+	int rc;
+	struct psc_dma *psc_dma;
+	struct mpc52xx_psc __iomem *regs;
 
-	/* Allocate and initialize the driver private data */
-	psc_i2s = kzalloc(sizeof *psc_i2s, GFP_KERNEL);
-	if (!psc_i2s) {
-		iounmap(regs);
-		return -ENOMEM;
-	}
-	spin_lock_init(&psc_i2s->lock);
-	psc_i2s->irq = irq;
-	psc_i2s->psc_regs = regs;
-	psc_i2s->fifo_regs = regs + sizeof *psc_i2s->psc_regs;
-	psc_i2s->dev = &op->dev;
-	psc_i2s->playback.psc_i2s = psc_i2s;
-	psc_i2s->capture.psc_i2s = psc_i2s;
-	snprintf(psc_i2s->name, sizeof psc_i2s->name, "PSC%u", psc_id+1);
-
-	/* Fill out the CPU DAI structure */
-	memcpy(&psc_i2s->dai, &psc_i2s_dai_template, sizeof psc_i2s->dai);
-	psc_i2s->dai.private_data = psc_i2s;
-	psc_i2s->dai.name = psc_i2s->name;
-	psc_i2s->dai.id = psc_id;
-
-	/* Find the address of the fifo data registers and setup the
-	 * DMA tasks */
-	fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32);
-	psc_i2s->capture.bcom_task =
-		bcom_psc_gen_bd_rx_init(psc_id, 10, fifo, 512);
-	psc_i2s->playback.bcom_task =
-		bcom_psc_gen_bd_tx_init(psc_id, 10, fifo);
-	if (!psc_i2s->capture.bcom_task ||
-	    !psc_i2s->playback.bcom_task) {
-		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
-		iounmap(regs);
-		kfree(psc_i2s);
-		return -ENODEV;
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
+
+	rc = snd_soc_register_dais(psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
+	if (rc != 0) {
+		pr_err("Failed to register DAI\n");
+		return 0;
 	}
 
-	/* Disable all interrupts and reset the PSC */
-	out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0);
-	out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset transmitter */
-	out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset receiver */
-	out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */
-	out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
 
 	/* Configure the serial interface mode; defaulting to CODEC8 mode */
-	psc_i2s->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
+	psc_dma->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
 			MPC52xx_PSC_SICR_CLKPOL;
-	if (of_get_property(op->node, "fsl,cellslave", NULL))
-		psc_i2s->sicr |= MPC52xx_PSC_SICR_CELLSLAVE |
-				 MPC52xx_PSC_SICR_GENCLK;
-	out_be32(&psc_i2s->psc_regs->sicr,
-		 psc_i2s->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
+	out_be32(&psc_dma->psc_regs->sicr,
+		 psc_dma->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
 
 	/* Check for the codec handle.  If it is not present then we
 	 * are done */
 	if (!of_get_property(op->node, "codec-handle", NULL))
 		return 0;
 
-	/* Set up mode register;
-	 * First write: RxRdy (FIFO Alarm) generates rx FIFO irq
-	 * Second write: register Normal mode for non loopback
-	 */
-	out_8(&psc_i2s->psc_regs->mode, 0);
-	out_8(&psc_i2s->psc_regs->mode, 0);
-
-	/* Set the TX and RX fifo alarm thresholds */
-	out_be16(&psc_i2s->fifo_regs->rfalarm, 0x100);
-	out_8(&psc_i2s->fifo_regs->rfcntl, 0x4);
-	out_be16(&psc_i2s->fifo_regs->tfalarm, 0x100);
-	out_8(&psc_i2s->fifo_regs->tfcntl, 0x7);
-
-	/* Lookup the IRQ numbers */
-	psc_i2s->playback.irq =
-		bcom_get_task_irq(psc_i2s->playback.bcom_task);
-	psc_i2s->capture.irq =
-		bcom_get_task_irq(psc_i2s->capture.bcom_task);
-
-	/* Save what we've done so it can be found again later */
-	dev_set_drvdata(&op->dev, psc_i2s);
-
-	/* Register the SYSFS files */
-	rc = device_create_file(psc_i2s->dev, &dev_attr_status);
-	rc |= device_create_file(psc_i2s->dev, &dev_attr_capture_overrun);
-	rc |= device_create_file(psc_i2s->dev, &dev_attr_playback_underrun);
-	if (rc)
-		dev_info(psc_i2s->dev, "error creating sysfs files\n");
-
-	snd_soc_register_platform(&psc_i2s_pcm_soc_platform);
-
-	/* Tell the ASoC OF helpers about it */
-	of_snd_soc_register_platform(&psc_i2s_pcm_soc_platform, op->node,
-				     &psc_i2s->dai);
+	/* Due to errata in the dma mode; need to line up enabling
+	 * the transmitter with a transition on the frame sync
+	 * line */
+
+	/* first make sure it is low */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
+		;
+	/* then wait for the transition to high */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
+		;
+	/* Finally, enable the PSC.
+	 * Receiver must always be enabled; even when we only want
+	 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
+
+	/* Go */
+	out_8(&psc_dma->psc_regs->command,
+			MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
 
 	return 0;
+
 }
 
 static int __devexit psc_i2s_of_remove(struct of_device *op)
 {
-	struct psc_i2s *psc_i2s = dev_get_drvdata(&op->dev);
-
-	dev_dbg(&op->dev, "psc_i2s_remove()\n");
-
-	snd_soc_unregister_platform(&psc_i2s_pcm_soc_platform);
-
-	bcom_gen_bd_rx_release(psc_i2s->capture.bcom_task);
-	bcom_gen_bd_tx_release(psc_i2s->playback.bcom_task);
-
-	iounmap(psc_i2s->psc_regs);
-	iounmap(psc_i2s->fifo_regs);
-	kfree(psc_i2s);
-	dev_set_drvdata(&op->dev, NULL);
-
-	return 0;
+	return mpc5200_audio_dma_destroy(op);
 }
 
 /* Match table for of_platform binding */
 static struct of_device_id psc_i2s_match[] __devinitdata = {
 	{ .compatible = "fsl,mpc5200-psc-i2s", },
+	{ .compatible = "fsl,mpc5200b-psc-i2s", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, psc_i2s_match);
@@ -892,4 +245,7 @@ static void __exit psc_i2s_exit(void)
 }
 module_exit(psc_i2s_exit);
 
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
+MODULE_LICENSE("GPL");
 
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.h b/sound/soc/fsl/mpc5200_psc_i2s.h
new file mode 100644
index 00000000000..ce55e070fdf
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_i2s.h
@@ -0,0 +1,12 @@
+/*
+ * Freescale MPC5200 PSC in I2S mode
+ * ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
+#define __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
+
+extern struct snd_soc_dai psc_i2s_dai[];
+
+#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ */
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
new file mode 100644
index 00000000000..8766f7a3893
--- /dev/null
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -0,0 +1,90 @@
+/*
+ * Phytec pcm030 driver for the PSC of the Freescale MPC52xx
+ * configured as AC97 interface
+ *
+ * Copyright 2008 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-of-simple.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+#include "../codecs/wm9712.h"
+
+static struct snd_soc_device device;
+static struct snd_soc_card card;
+
+static struct snd_soc_dai_link pcm030_fabric_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 Analog",
+	.codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL],
+},
+{
+	.name = "AC97",
+	.stream_name = "AC97 IEC958",
+	.codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF],
+},
+};
+
+static __init int pcm030_fabric_init(void)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	if (!machine_is_compatible("phytec,pcm030"))
+		return -ENODEV;
+
+	card.platform = &mpc5200_audio_dma_platform;
+	card.name = "pcm030";
+	card.dai_link = pcm030_fabric_dai;
+	card.num_links = ARRAY_SIZE(pcm030_fabric_dai);
+
+	device.card = &card;
+	device.codec_dev = &soc_codec_dev_wm9712;
+
+	pdev = platform_device_alloc("soc-audio", 1);
+	if (!pdev) {
+		pr_err("pcm030_fabric_init: platform_device_alloc() failed\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, &device);
+	device.dev = &pdev->dev;
+
+	rc = platform_device_add(pdev);
+	if (rc) {
+		pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+module_init(pcm030_fabric_init);
+
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION(DRV_NAME ": mpc5200 pcm030 fabric driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 675732e724d..b771238662b 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -39,6 +39,14 @@ config SND_OMAP_SOC_OMAP2EVM
 	help
 	  Say Y if you want to add support for SoC audio on the omap2evm board.
 
+config SND_OMAP_SOC_OMAP3EVM
+	tristate "SoC Audio support for OMAP3EVM board"
+	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TWL4030
+	help
+	  Say Y if you want to add support for SoC audio on the omap3evm board.
+
 config SND_OMAP_SOC_SDP3430
 	tristate "SoC Audio support for Texas Instruments SDP3430"
 	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 0c9e4ac3766..a37f4986238 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -10,6 +10,7 @@ snd-soc-n810-objs := n810.o
 snd-soc-osk5912-objs := osk5912.o
 snd-soc-overo-objs := overo.o
 snd-soc-omap2evm-objs := omap2evm.o
+snd-soc-omap3evm-objs := omap3evm.o
 snd-soc-sdp3430-objs := sdp3430.o
 snd-soc-omap3pandora-objs := omap3pandora.o
 snd-soc-omap3beagle-objs := omap3beagle.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
 obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
 obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
 obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
+obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o
 obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 91ef17992de..b60b1dfbc43 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -383,10 +383,9 @@ static int __init n810_soc_init(void)
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
 
-	if (gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0)
-		BUG();
-	if (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0)
-		BUG();
+	BUG_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) ||
+	       (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0));
+
 	gpio_direction_output(N810_HEADSET_AMP_GPIO, 0);
 	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
 
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 91261428384..a5d46a7b196 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -215,8 +215,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
-	int wlen, channels;
+	int wlen, channels, wpf;
 	unsigned long port;
+	unsigned int format;
 
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
@@ -244,18 +245,24 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 		return 0;
 	}
 
-	channels = params_channels(params);
+	format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+	wpf = channels = params_channels(params);
 	switch (channels) {
 	case 2:
-		/* Use dual-phase frames */
-		regs->rcr2	|= RPHASE;
-		regs->xcr2	|= XPHASE;
+		if (format == SND_SOC_DAIFMT_I2S) {
+			/* Use dual-phase frames */
+			regs->rcr2	|= RPHASE;
+			regs->xcr2	|= XPHASE;
+			/* Set 1 word per (McBSP) frame for phase1 and phase2 */
+			wpf--;
+			regs->rcr2	|= RFRLEN2(wpf - 1);
+			regs->xcr2	|= XFRLEN2(wpf - 1);
+		}
 	case 1:
-		/* Set 1 word per (McBSP) frame */
-		regs->rcr2	|= RFRLEN2(1 - 1);
-		regs->rcr1	|= RFRLEN1(1 - 1);
-		regs->xcr2	|= XFRLEN2(1 - 1);
-		regs->xcr1	|= XFRLEN1(1 - 1);
+	case 4:
+		/* Set word per (McBSP) frame for phase1 */
+		regs->rcr1	|= RFRLEN1(wpf - 1);
+		regs->xcr1	|= XFRLEN1(wpf - 1);
 		break;
 	default:
 		/* Unsupported number of channels */
@@ -277,11 +284,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Set FS period and length in terms of bit clock periods */
-	switch (mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	switch (format) {
 	case SND_SOC_DAIFMT_I2S:
-		regs->srgr2	|= FPER(wlen * 2 - 1);
+		regs->srgr2	|= FPER(wlen * channels - 1);
 		regs->srgr1	|= FWID(wlen - 1);
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
 	case SND_SOC_DAIFMT_DSP_B:
 		regs->srgr2	|= FPER(wlen * channels - 1);
 		regs->srgr1	|= FWID(0);
@@ -326,6 +334,13 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		regs->rcr2	|= RDATDLY(1);
 		regs->xcr2	|= XDATDLY(1);
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/* 1-bit data delay */
+		regs->rcr2      |= RDATDLY(1);
+		regs->xcr2      |= XDATDLY(1);
+		/* Invert FS polarity configuration */
+		temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
+		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		/* 0-bit data delay */
 		regs->rcr2      |= RDATDLY(0);
@@ -492,13 +507,13 @@ static struct snd_soc_dai_ops omap_mcbsp_dai_ops = {
 	.id = (link_id),					\
 	.playback = {						\
 		.channels_min = 1,				\
-		.channels_max = 2,				\
+		.channels_max = 4,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
 	.capture = {						\
 		.channels_min = 1,				\
-		.channels_max = 2,				\
+		.channels_max = 4,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 07cf7f46b58..6454e15f7d2 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -87,8 +87,10 @@ static int omap_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct omap_pcm_dma_data *dma_data = rtd->dai->cpu_dai->dma_data;
 	int err = 0;
 
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
 	if (!dma_data)
-		return -ENODEV;
+		return 0;
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 	runtime->dma_bytes = params_buffer_bytes(params);
@@ -134,6 +136,11 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream)
 	struct omap_pcm_dma_data *dma_data = prtd->dma_data;
 	struct omap_dma_channel_params dma_params;
 
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->dma_data)
+		return 0;
+
 	memset(&dma_params, 0, sizeof(dma_params));
 	/*
 	 * Note: Regardless of interface data formats supported by OMAP McBSP
diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c
index 0c2322dcf02..027e1a40f8a 100644
--- a/sound/soc/omap/omap2evm.c
+++ b/sound/soc/omap/omap2evm.c
@@ -86,7 +86,7 @@ static struct snd_soc_dai_link omap2evm_dai = {
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &omap2evm_ops,
 };
 
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index fd24a4acd2f..b0cff9f33b7 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -41,23 +41,33 @@ static int omap3beagle_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int fmt;
 	int ret;
 
+	switch (params_channels(params)) {
+	case 2: /* Stereo I2S mode */
+		fmt =	SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	case 4: /* Four channel TDM mode */
+		fmt =	SND_SOC_DAIFMT_DSP_A |
+			SND_SOC_DAIFMT_IB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	/* Set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai,
-				  SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
 	if (ret < 0) {
 		printk(KERN_ERR "can't set codec DAI configuration\n");
 		return ret;
 	}
 
 	/* Set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai,
-				  SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
 	if (ret < 0) {
 		printk(KERN_ERR "can't set cpu DAI configuration\n");
 		return ret;
@@ -83,7 +93,7 @@ static struct snd_soc_dai_link omap3beagle_dai = {
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &omap3beagle_ops,
 };
 
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
new file mode 100644
index 00000000000..9114c263077
--- /dev/null
+++ b/sound/soc/omap/omap3evm.c
@@ -0,0 +1,147 @@
+/*
+ * omap3evm.c  -- ALSA SoC support for OMAP3 EVM
+ *
+ * Author: Anuj Aggarwal <anuj.aggarwal@ti.com>
+ *
+ * Based on sound/soc/omap/beagle.c by Steve Sakoman
+ *
+ * Copyright (C) 2008 Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int omap3evm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops omap3evm_ops = {
+	.hw_params = omap3evm_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap3evm_dai = {
+	.name 		= "TWL4030",
+	.stream_name 	= "TWL4030",
+	.cpu_dai 	= &omap_mcbsp_dai[0],
+	.codec_dai 	= &twl4030_dai[TWL4030_DAI_HIFI],
+	.ops 		= &omap3evm_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_omap3evm = {
+	.name = "omap3evm",
+	.platform = &omap_soc_platform,
+	.dai_link = &omap3evm_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap3evm_snd_devdata = {
+	.card = &snd_soc_omap3evm,
+	.codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap3evm_snd_device;
+
+static int __init omap3evm_soc_init(void)
+{
+	int ret;
+
+	if (!machine_is_omap3evm()) {
+		pr_err("Not OMAP3 EVM!\n");
+		return -ENODEV;
+	}
+	pr_info("OMAP3 EVM SoC init\n");
+
+	omap3evm_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!omap3evm_snd_device) {
+		printk(KERN_ERR "Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata);
+	omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev;
+	*(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1;
+
+	ret = platform_device_add(omap3evm_snd_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	printk(KERN_ERR "Unable to add platform device\n");
+	platform_device_put(omap3evm_snd_device);
+
+	return ret;
+}
+
+static void __exit omap3evm_soc_exit(void)
+{
+	platform_device_unregister(omap3evm_snd_device);
+}
+
+module_init(omap3evm_soc_init);
+module_exit(omap3evm_soc_exit);
+
+MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
+MODULE_LICENSE("GPLv2");
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index fe282d4ef42..ad219aaf7cb 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -228,14 +228,14 @@ static struct snd_soc_dai_link omap3pandora_dai[] = {
 		.name = "PCM1773",
 		.stream_name = "HiFi Out",
 		.cpu_dai = &omap_mcbsp_dai[0],
-		.codec_dai = &twl4030_dai,
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 		.ops = &omap3pandora_out_ops,
 		.init = omap3pandora_out_init,
 	}, {
 		.name = "TWL4030",
 		.stream_name = "Line/Mic In",
 		.cpu_dai = &omap_mcbsp_dai[1],
-		.codec_dai = &twl4030_dai,
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 		.ops = &omap3pandora_in_ops,
 		.init = omap3pandora_in_init,
 	}
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index a72dc4e159e..ec4f8fd8b3a 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -83,7 +83,7 @@ static struct snd_soc_dai_link overo_dai = {
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &overo_ops,
 };
 
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 10f1c867f11..b719e5db4f5 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -84,6 +84,49 @@ static struct snd_soc_ops sdp3430_ops = {
 	.hw_params = sdp3430_hw_params,
 };
 
+static int sdp3430_hw_voice_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				SND_SOC_DAIFMT_DSP_A |
+				SND_SOC_DAIFMT_IB_NF |
+				SND_SOC_DAIFMT_CBS_CFM);
+	if (ret) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				SND_SOC_DAIFMT_DSP_A |
+				SND_SOC_DAIFMT_IB_NF |
+				SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+					    SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops sdp3430_voice_ops = {
+	.hw_params = sdp3430_hw_voice_params,
+};
+
 /* Headset jack */
 static struct snd_soc_jack hs_jack;
 
@@ -192,28 +235,58 @@ static int sdp3430_twl4030_init(struct snd_soc_codec *codec)
 	return ret;
 }
 
+static int sdp3430_twl4030_voice_init(struct snd_soc_codec *codec)
+{
+	unsigned short reg;
+
+	/* Enable voice interface */
+	reg = codec->read(codec, TWL4030_REG_VOICE_IF);
+	reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN;
+	codec->write(codec, TWL4030_REG_VOICE_IF, reg);
+
+	return 0;
+}
+
+
 /* Digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link sdp3430_dai = {
-	.name = "TWL4030",
-	.stream_name = "TWL4030",
-	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
-	.init = sdp3430_twl4030_init,
-	.ops = &sdp3430_ops,
+static struct snd_soc_dai_link sdp3430_dai[] = {
+	{
+		.name = "TWL4030 I2S",
+		.stream_name = "TWL4030 Audio",
+		.cpu_dai = &omap_mcbsp_dai[0],
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+		.init = sdp3430_twl4030_init,
+		.ops = &sdp3430_ops,
+	},
+	{
+		.name = "TWL4030 PCM",
+		.stream_name = "TWL4030 Voice",
+		.cpu_dai = &omap_mcbsp_dai[1],
+		.codec_dai = &twl4030_dai[TWL4030_DAI_VOICE],
+		.init = sdp3430_twl4030_voice_init,
+		.ops = &sdp3430_voice_ops,
+	},
 };
 
 /* Audio machine driver */
 static struct snd_soc_card snd_soc_sdp3430 = {
 	.name = "SDP3430",
 	.platform = &omap_soc_platform,
-	.dai_link = &sdp3430_dai,
-	.num_links = 1,
+	.dai_link = sdp3430_dai,
+	.num_links = ARRAY_SIZE(sdp3430_dai),
+};
+
+/* twl4030 setup */
+static struct twl4030_setup_data twl4030_setup = {
+	.ramp_delay_value = 3,
+	.sysclk = 26000,
 };
 
 /* Audio subsystem */
 static struct snd_soc_device sdp3430_snd_devdata = {
 	.card = &snd_soc_sdp3430,
 	.codec_dev = &soc_codec_dev_twl4030,
+	.codec_data = &twl4030_setup,
 };
 
 static struct platform_device *sdp3430_snd_device;
@@ -236,7 +309,8 @@ static int __init sdp3430_soc_init(void)
 
 	platform_set_drvdata(sdp3430_snd_device, &sdp3430_snd_devdata);
 	sdp3430_snd_devdata.dev = &sdp3430_snd_device->dev;
-	*(unsigned int *)sdp3430_dai.cpu_dai->private_data = 1; /* McBSP2 */
+	*(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
+	*(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
 
 	ret = platform_device_add(sdp3430_snd_device);
 	if (ret)
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index ad8a10fe629..6375b4ea525 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -89,22 +89,23 @@ config SND_PXA2XX_SOC_E800
 	  Toshiba e800 PDA
 
 config SND_PXA2XX_SOC_EM_X270
-	tristate "SoC Audio support for CompuLab EM-x270"
+	tristate "SoC Audio support for CompuLab EM-x270, eXeda and CM-X300"
 	depends on SND_PXA2XX_SOC && MACH_EM_X270
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  CompuLab EM-x270.
+	  CompuLab EM-x270, eXeda and CM-X300 machines.
 
 config SND_PXA2XX_SOC_PALM27X
-	bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
-	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+	bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive"
+	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
+			MACH_PALMT5 || MACH_PALMTE2)
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  Palm T|X, T5 or LifeDrive handheld computer.
+	  Palm T|X, T5, E2 or LifeDrive handheld computer.
 
 config SND_SOC_ZYLONITE
 	tristate "SoC Audio support for Marvell Zylonite"
@@ -134,3 +135,12 @@ config SND_PXA2XX_SOC_MIOA701
         help
           Say Y if you want to add support for SoC audio on the
           MIO A701.
+
+config SND_PXA2XX_SOC_IMOTE2
+       tristate "SoC Audio support for IMote 2"
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       select SND_PXA2XX_SOC_I2S
+       select SND_SOC_WM8940
+       help
+         Say Y if you want to add support for SoC audio on the
+	 IMote 2.
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index 4b90c3ccae4..6e096b48033 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o
 snd-soc-zylonite-objs := zylonite.o
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-imote2-objs := imote2.o
 
 obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
 obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
@@ -35,3 +36,4 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
+obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 949be9c2a01..f4756e4025f 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * em-x270.c  --  SoC audio for EM-X270
+ * SoC audio driver for EM-X270, eXeda and CM-X300
  *
- * Copyright 2007 CompuLab, Ltd.
+ * Copyright 2007, 2009 CompuLab, Ltd.
  *
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
@@ -68,7 +68,8 @@ static int __init em_x270_init(void)
 {
 	int ret;
 
-	if (!machine_is_em_x270())
+	if (!(machine_is_em_x270() || machine_is_exeda()
+	      || machine_is_cm_x300()))
 		return -ENODEV;
 
 	em_x270_snd_device = platform_device_alloc("soc-audio", -1);
@@ -95,5 +96,5 @@ module_exit(em_x270_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mike Rapoport");
-MODULE_DESCRIPTION("ALSA SoC EM-X270");
+MODULE_DESCRIPTION("ALSA SoC EM-X270, eXeda and CM-X300");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c
new file mode 100644
index 00000000000..405587a0116
--- /dev/null
+++ b/sound/soc/pxa/imote2.c
@@ -0,0 +1,114 @@
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8940.h"
+#include "pxa2xx-i2s.h"
+#include "pxa2xx-pcm.h"
+
+static int imote2_asoc_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* CPU should be clock master */
+	ret = snd_soc_dai_set_fmt(cpu_dai,  SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk,
+		SND_SOC_CLOCK_OUT);
+
+	return ret;
+}
+
+static struct snd_soc_ops imote2_asoc_ops = {
+	.hw_params = imote2_asoc_hw_params,
+};
+
+static struct snd_soc_dai_link imote2_dai = {
+	.name = "WM8940",
+	.stream_name = "WM8940",
+	.cpu_dai = &pxa_i2s_dai,
+	.codec_dai = &wm8940_dai,
+	.ops = &imote2_asoc_ops,
+};
+
+static struct snd_soc_card snd_soc_imote2 = {
+	.name = "Imote2",
+	.platform = &pxa2xx_soc_platform,
+	.dai_link = &imote2_dai,
+	.num_links = 1,
+};
+
+static struct snd_soc_device imote2_snd_devdata = {
+	.card = &snd_soc_imote2,
+	.codec_dev = &soc_codec_dev_wm8940,
+};
+
+static struct platform_device *imote2_snd_device;
+
+static int __init imote2_asoc_init(void)
+{
+	int ret;
+
+	if (!machine_is_intelmote2())
+		return -ENODEV;
+	imote2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!imote2_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(imote2_snd_device, &imote2_snd_devdata);
+	imote2_snd_devdata.dev = &imote2_snd_device->dev;
+	ret = platform_device_add(imote2_snd_device);
+	if (ret)
+		platform_device_put(imote2_snd_device);
+
+	return ret;
+}
+module_init(imote2_asoc_init);
+
+static void __exit imote2_asoc_exit(void)
+{
+	platform_device_unregister(imote2_snd_device);
+}
+module_exit(imote2_asoc_exit);
+
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_DESCRIPTION("ALSA SoC Imote 2");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 0625c342a1c..326955dea36 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -106,7 +106,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 513156 Hz ~= _2_ * 8000 Hz * 32 (+0.23%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_16;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 1026312 Hz ~= _2_ * 8000 Hz * 64 (+0.23%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_8;
 		}
@@ -118,7 +118,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 351375 Hz ~= 11025 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_4;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 702750 Hz ~= 11025 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 		}
@@ -130,7 +130,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 702750 Hz ~= 22050 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 1405500 Hz ~= 22050 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
@@ -142,7 +142,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 1405500 Hz ~= 44100 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 2811000 Hz ~= 44100 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
@@ -154,19 +154,20 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 1529375 Hz ~= 48000 Hz * 32 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 3058750 Hz ~= 48000 Hz * 64 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
 		break;
 	case 96000:
+	default:
 		acps = 12235000;
 		switch (width) {
 		case 16:
 			/* 3058750 Hz ~= 96000 Hz * 32 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 6117500 Hz ~= 96000 Hz * 64 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			div4 = PXA_SSP_CLK_SCDB_1;
@@ -183,7 +184,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 
 	/* set cpu DAI configuration */
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
-			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBS_CFS);
+			SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_CBS_CFS);
 	if (ret < 0)
 		return ret;
 
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 44fcc4e01e0..e6102fda0a7 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!(machine_is_palmtx() || machine_is_palmt5() ||
-		machine_is_palmld()))
+		machine_is_palmld() || machine_is_palmte2()))
 		return -ENODEV;
 
 	if (pdev->dev.platform_data)
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 286be31545d..19c45409d94 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -50,139 +50,6 @@ struct ssp_priv {
 #endif
 };
 
-#define PXA2xx_SSP1_BASE	0x41000000
-#define PXA27x_SSP2_BASE	0x41700000
-#define PXA27x_SSP3_BASE	0x41900000
-#define PXA3xx_SSP4_BASE	0x41a00000
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
-	.name			= "SSP1 PCM Mono out",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(14),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
-	.name			= "SSP1 PCM Mono in",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(13),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
-	.name			= "SSP1 PCM Stereo out",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(14),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
-	.name			= "SSP1 PCM Stereo in",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(13),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
-	.name			= "SSP2 PCM Mono out",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(16),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
-	.name			= "SSP2 PCM Mono in",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(15),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
-	.name			= "SSP2 PCM Stereo out",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(16),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
-	.name			= "SSP2 PCM Stereo in",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(15),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
-	.name			= "SSP3 PCM Mono out",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
-	.name			= "SSP3 PCM Mono in",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
-	.name			= "SSP3 PCM Stereo out",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
-	.name			= "SSP3 PCM Stereo in",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
-	.name			= "SSP4 PCM Mono out",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
-	.name			= "SSP4 PCM Mono in",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
-	.name			= "SSP4 PCM Stereo out",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
-	.name			= "SSP4 PCM Stereo in",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
 static void dump_registers(struct ssp_device *ssp)
 {
 	dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
@@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp)
 		 ssp_read_reg(ssp, SSACD));
 }
 
-static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
-	{
-		&pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
-		&pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
-		&pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
-		&pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
-		&pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
-	},
+struct pxa2xx_pcm_dma_data {
+	struct pxa2xx_pcm_dma_params params;
+	char name[20];
 };
 
+static struct pxa2xx_pcm_dma_params *
+ssp_get_dma_params(struct ssp_device *ssp, int width4, int out)
+{
+	struct pxa2xx_pcm_dma_data *dma;
+
+	dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
+	if (dma == NULL)
+		return NULL;
+
+	snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
+			width4 ? "32-bit" : "16-bit", out ? "out" : "in");
+
+	dma->params.name = dma->name;
+	dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
+	dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
+				  (DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
+			(width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
+	dma->params.dev_addr = ssp->phys_base + SSDR;
+
+	return &dma->params;
+}
+
 static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
@@ -227,6 +102,11 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 		clk_enable(priv->dev.ssp->clk);
 		ssp_disable(&priv->dev);
 	}
+
+	if (cpu_dai->dma_data) {
+		kfree(cpu_dai->dma_data);
+		cpu_dai->dma_data = NULL;
+	}
 	return ret;
 }
 
@@ -241,6 +121,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
 		ssp_disable(&priv->dev);
 		clk_disable(priv->dev.ssp->clk);
 	}
+
+	if (cpu_dai->dma_data) {
+		kfree(cpu_dai->dma_data);
+		cpu_dai->dma_data = NULL;
+	}
 }
 
 #ifdef CONFIG_PM
@@ -323,7 +208,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 		~(SSCR0_ECS |  SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
 
 	dev_dbg(&ssp->pdev->dev,
-		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n",
+		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
 		cpu_dai->id, clk_id, freq);
 
 	switch (clk_id) {
@@ -472,7 +357,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai,
 			ssacd |= (0x6 << 4);
 
 			dev_dbg(&ssp->pdev->dev,
-				"Using SSACDD %x to supply %dHz\n",
+				"Using SSACDD %x to supply %uHz\n",
 				val, freq_out);
 			break;
 		}
@@ -589,7 +474,10 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		case SND_SOC_DAIFMT_NB_IF:
 			break;
 		case SND_SOC_DAIFMT_IB_IF:
-			sspsp |= SSPSP_SCMODE(3);
+			sspsp |= SSPSP_SCMODE(2);
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
 			break;
 		default:
 			return -EINVAL;
@@ -606,7 +494,13 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		case SND_SOC_DAIFMT_NB_NF:
 			sspsp |= SSPSP_SFRMP;
 			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			break;
 		case SND_SOC_DAIFMT_IB_IF:
+			sspsp |= SSPSP_SCMODE(2);
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
 			break;
 		default:
 			return -EINVAL;
@@ -644,25 +538,23 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
 	struct ssp_device *ssp = priv->dev.ssp;
-	int dma = 0, chn = params_channels(params);
+	int chn = params_channels(params);
 	u32 sscr0;
 	u32 sspsp;
 	int width = snd_pcm_format_physical_width(params_format(params));
 	int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
 
-	/* select correct DMA params */
-	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
-		dma = 1; /* capture DMA offset is 1,3 */
+	/* generate correct DMA params */
+	if (cpu_dai->dma_data)
+		kfree(cpu_dai->dma_data);
+
 	/* Network mode with one active slot (ttsa == 1) can be used
 	 * to force 16-bit frame width on the wire (for S16_LE), even
 	 * with two channels. Use 16-bit DMA transfers for this case.
 	 */
-	if (((chn == 2) && (ttsa != 1)) || (width == 32))
-		dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */
-
-	cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
-
-	dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
+	cpu_dai->dma_data = ssp_get_dma_params(ssp,
+			((chn == 2) && (ttsa != 1)) || (width == 32),
+			substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
 
 	/* we can only change the settings if the port is not in use */
 	if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 2f4b6e489b7..4743e262895 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -106,10 +106,8 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
 
-	if (!cpu_dai->active) {
-		SACR0 |= SACR0_RST;
+	if (!cpu_dai->active)
 		SACR0 = 0;
-	}
 
 	return 0;
 }
@@ -178,9 +176,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	/* is port used by another stream */
 	if (!(SACR0 & SACR0_ENB)) {
-
 		SACR0 = 0;
-		SACR1 = 0;
 		if (pxa_i2s.master)
 			SACR0 |= SACR0_BCKD;
 
@@ -226,6 +222,10 @@ static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			SACR1 &= ~SACR1_DRPL;
+		else
+			SACR1 &= ~SACR1_DREC;
 		SACR0 |= SACR0_ENB;
 		break;
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -252,21 +252,16 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream,
 		SAIMR &= ~SAIMR_RFS;
 	}
 
-	if (SACR1 & (SACR1_DREC | SACR1_DRPL)) {
+	if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
 		SACR0 &= ~SACR0_ENB;
 		pxa_i2s_wait();
 		clk_disable(clk_i2s);
 	}
-
-	clk_put(clk_i2s);
 }
 
 #ifdef CONFIG_PM
 static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
 {
-	if (!dai->active)
-		return 0;
-
 	/* store registers */
 	pxa_i2s.sacr0 = SACR0;
 	pxa_i2s.sacr1 = SACR1;
@@ -281,16 +276,14 @@ static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
 
 static int pxa2xx_i2s_resume(struct snd_soc_dai *dai)
 {
-	if (!dai->active)
-		return 0;
-
 	pxa_i2s_wait();
 
-	SACR0 = pxa_i2s.sacr0 &= ~SACR0_ENB;
+	SACR0 = pxa_i2s.sacr0 & ~SACR0_ENB;
 	SACR1 = pxa_i2s.sacr1;
 	SAIMR = pxa_i2s.saimr;
 	SADIV = pxa_i2s.sadiv;
-	SACR0 |= SACR0_ENB;
+
+	SACR0 = pxa_i2s.sacr0;
 
 	return 0;
 }
@@ -329,6 +322,7 @@ struct snd_soc_dai pxa_i2s_dai = {
 		.rates = PXA2XX_I2S_RATES,
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
 	.ops = &pxa_i2s_dai_ops,
+	.symmetric_rates = 1,
 };
 
 EXPORT_SYMBOL_GPL(pxa_i2s_dai);
@@ -346,6 +340,19 @@ static int pxa2xx_i2s_probe(struct platform_device *dev)
 	if (ret != 0)
 		clk_put(clk_i2s);
 
+	/*
+	 * PXA Developer's Manual:
+	 * If SACR0[ENB] is toggled in the middle of a normal operation,
+	 * the SACR0[RST] bit must also be set and cleared to reset all
+	 * I2S controller registers.
+	 */
+	SACR0 = SACR0_RST;
+	SACR0 = 0;
+	/* Make sure RPL and REC are disabled */
+	SACR1 = SACR1_DRPL | SACR1_DREC;
+	/* Along with FIFO servicing */
+	SAIMR &= ~(SAIMR_RFS | SAIMR_TFS);
+
 	return ret;
 }
 
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 289fadf60b1..906709e6dd5 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -345,9 +345,11 @@ static void lm4857_write_regs(void)
 static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
-	int reg = kcontrol->private_value & 0xFF;
-	int shift = (kcontrol->private_value >> 8) & 0x0F;
-	int mask = (kcontrol->private_value >> 16) & 0xFF;
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -358,9 +360,11 @@ static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
 static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
-	int reg = kcontrol->private_value & 0xFF;
-	int shift = (kcontrol->private_value >> 8) & 0x0F;
-	int mask = (kcontrol->private_value >> 16) & 0xFF;
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
 
 	if (((lm4857_regs[reg] >> shift) & mask) ==
 		ucontrol->value.integer.value[0])
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index ab680aac3fc..1a283170ca9 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -37,6 +37,20 @@
 
 #include "s3c-i2s-v2.h"
 
+#undef S3C_IIS_V2_SUPPORTED
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifndef S3C_IIS_V2_SUPPORTED
+#error Unsupported CPU model
+#endif
+
 #define S3C2412_I2S_DEBUG_CON 0
 
 static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
@@ -75,7 +89,7 @@ static inline void dbg_showcon(const char *fn, u32 con)
 
 
 /* Turn on or off the transmission path. */
-void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
+static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 {
 	void __iomem *regs = i2s->regs;
 	u32 fic, con, mod;
@@ -105,7 +119,9 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
 		}
 
 		writel(con, regs + S3C2412_IISCON);
@@ -132,7 +148,9 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
 		}
 
 		writel(mod, regs + S3C2412_IISMOD);
@@ -143,9 +161,8 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 	dbg_showcon(__func__, con);
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
-EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl);
 
-void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
+static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 {
 	void __iomem *regs = i2s->regs;
 	u32 fic, con, mod;
@@ -175,7 +192,8 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
 		}
 
 		writel(mod, regs + S3C2412_IISMOD);
@@ -199,7 +217,8 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
 		}
 
 		writel(con, regs + S3C2412_IISCON);
@@ -209,7 +228,6 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 	fic = readl(regs + S3C2412_IISFIC);
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
-EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl);
 
 /*
  * Wait for the LR signal to allow synchronisation to the L/R clock
@@ -266,7 +284,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
  */
 #define IISMOD_MASTER_MASK (1 << 11)
 #define IISMOD_SLAVE (1 << 11)
-#define IISMOD_MASTER (0x0)
+#define IISMOD_MASTER (0 << 11)
 #endif
 
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -281,7 +299,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		iismod |= IISMOD_MASTER;
 		break;
 	default:
-		pr_debug("unknwon master/slave format\n");
+		pr_err("unknwon master/slave format\n");
 		return -EINVAL;
 	}
 
@@ -298,7 +316,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		iismod |= S3C2412_IISMOD_SDF_IIS;
 		break;
 	default:
-		pr_debug("Unknown data format\n");
+		pr_err("Unknown data format\n");
 		return -EINVAL;
 	}
 
@@ -327,6 +345,7 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 	iismod = readl(i2s->regs + S3C2412_IISMOD);
 	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
 
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S8:
 		iismod |= S3C2412_IISMOD_8BIT;
@@ -335,6 +354,25 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 		iismod &= ~S3C2412_IISMOD_8BIT;
 		break;
 	}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+	iismod &= ~0x606;
+	/* Sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		/* 8 bit sample, 16fs BCLK */
+		iismod |= 0x2004;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		/* 16 bit sample, 32fs BCLK */
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		/* 24 bit sample, 48fs BCLK */
+		iismod |= 0x4002;
+		break;
+	}
+#endif
 
 	writel(iismod, i2s->regs + S3C2412_IISMOD);
 	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
@@ -489,6 +527,8 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 	unsigned int best_rate = 0;
 	unsigned int best_deviation = INT_MAX;
 
+	pr_debug("Input clock rate %ldHz\n", clkrate);
+
 	if (fstab == NULL)
 		fstab = iis_fs_tab;
 
@@ -507,7 +547,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 		actual = clkrate / (fsdiv * div);
 		deviation = actual - rate;
 
-		printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n",
+		printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
 		       fsdiv, div, actual, deviation);
 
 		deviation = abs(deviation);
@@ -523,7 +563,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 			break;
 	}
 
-	printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n",
+	printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
 	       best_fs, best_div, best_rate);
 
 	info->fs_div = best_fs;
@@ -539,12 +579,31 @@ int s3c_i2sv2_probe(struct platform_device *pdev,
 		    unsigned long base)
 {
 	struct device *dev = &pdev->dev;
+	unsigned int iismod;
 
 	i2s->dev = dev;
 
 	/* record our i2s structure for later use in the callbacks */
 	dai->private_data = i2s;
 
+	if (!base) {
+		struct resource *res = platform_get_resource(pdev,
+							     IORESOURCE_MEM,
+							     0);
+		if (!res) {
+			dev_err(dev, "Unable to get register resource\n");
+			return -ENXIO;
+		}
+
+		if (!request_mem_region(res->start, resource_size(res),
+					"s3c64xx-i2s-v4")) {
+			dev_err(dev, "Unable to request register region\n");
+			return -EBUSY;
+		}
+
+		base = res->start;
+	}
+
 	i2s->regs = ioremap(base, 0x100);
 	if (i2s->regs == NULL) {
 		dev_err(dev, "cannot ioremap registers\n");
@@ -560,12 +619,16 @@ int s3c_i2sv2_probe(struct platform_device *pdev,
 
 	clk_enable(i2s->iis_pclk);
 
+	/* Mark ourselves as in TXRX mode so we can run through our cleanup
+	 * process without warnings. */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	iismod |= S3C2412_IISMOD_MODE_TXRX;
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
 	s3c2412_snd_txctrl(i2s, 0);
 	s3c2412_snd_rxctrl(i2s, 0);
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
 
 #ifdef CONFIG_PM
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index b7e0b3f0bfc..a587ec40b44 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
@@ -120,7 +121,7 @@ static int s3c2412_i2s_probe(struct platform_device *pdev,
 
 	s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk");
 	if (s3c2412_i2s.iis_cclk == NULL) {
-		pr_debug("failed to get i2sclk clock\n");
+		pr_err("failed to get i2sclk clock\n");
 		iounmap(s3c2412_i2s.regs);
 		return -ENODEV;
 	}
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3698f707c44..3f03d5ddfac 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 
 #include <sound/core.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index cc066964dad..556e35f0ab7 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -21,6 +21,8 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 169ddad3157..eecfa5eba06 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
 	 * sync to pclk, half-word transfers to the IIS-FIFO. */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		s3c2410_dma_devconfig(prtd->params->channel,
-				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
-				S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_SYNC_PCLK |
-				S3C2410_DCON_HANDSHAKE);
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
 	} else {
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_HANDSHAKE |
-				S3C2410_DCON_SYNC_PCLK);
-
 		s3c2410_dma_devconfig(prtd->params->channel,
-					S3C2410_DMASRC_HW, 0x3,
-					prtd->params->dma_addr);
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
 	}
 
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
 	/* flush the DMA channel */
 	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
 	prtd->dma_loaded = 0;
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 33c5de7e255..3c06c401d0f 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -108,48 +108,19 @@ static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
 	return 0;
 }
 
-
-unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai)
+struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai)
 {
 	struct s3c_i2sv2_info *i2s = to_info(dai);
 
-	return clk_get_rate(i2s->iis_cclk);
+	return i2s->iis_cclk;
 }
-EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate);
+EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clock);
 
 static int s3c64xx_i2s_probe(struct platform_device *pdev,
 			     struct snd_soc_dai *dai)
 {
-	struct device *dev = &pdev->dev;
-	struct s3c_i2sv2_info *i2s;
-	int ret;
-
-	dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id);
-
-	if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) {
-		dev_err(dev, "id %d out of range\n", pdev->id);
-		return -EINVAL;
-	}
-
-	i2s = &s3c64xx_i2s[pdev->id];
-
-	ret = s3c_i2sv2_probe(pdev, dai, i2s,
-			      pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0);
-	if (ret)
-		return ret;
-
-	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
-	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
-
-	i2s->iis_cclk = clk_get(dev, "audio-bus");
-	if (IS_ERR(i2s->iis_cclk)) {
-		dev_err(dev, "failed to get audio-bus");
-		iounmap(i2s->regs);
-		return -ENODEV;
-	}
-
 	/* configure GPIO for i2s port */
-	switch (pdev->id) {
+	switch (dai->id) {
 	case 0:
 		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
 		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
@@ -175,41 +146,122 @@ static int s3c64xx_i2s_probe(struct platform_device *pdev,
 	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
 
 #define S3C64XX_I2S_FMTS \
-	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE)
+	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+	 SNDRV_PCM_FMTBIT_S24_LE)
 
 static struct snd_soc_dai_ops s3c64xx_i2s_dai_ops = {
 	.set_sysclk	= s3c64xx_i2s_set_sysclk,	
 };
 
-struct snd_soc_dai s3c64xx_i2s_dai = {
-	.name		= "s3c64xx-i2s",
-	.id		= 0,
-	.probe		= s3c64xx_i2s_probe,
-	.playback = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C64XX_I2S_RATES,
-		.formats	= S3C64XX_I2S_FMTS,
+struct snd_soc_dai s3c64xx_i2s_dai[] = {
+	{
+		.name		= "s3c64xx-i2s",
+		.id		= 0,
+		.probe		= s3c64xx_i2s_probe,
+		.playback = {
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= S3C64XX_I2S_RATES,
+			.formats	= S3C64XX_I2S_FMTS,
+		},
+		.capture = {
+			 .channels_min	= 2,
+			 .channels_max	= 2,
+			 .rates		= S3C64XX_I2S_RATES,
+			 .formats	= S3C64XX_I2S_FMTS,
+		 },
+		.ops = &s3c64xx_i2s_dai_ops,
+		.symmetric_rates = 1,
 	},
-	.capture = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C64XX_I2S_RATES,
-		.formats	= S3C64XX_I2S_FMTS,
+	{
+		.name		= "s3c64xx-i2s",
+		.id		= 1,
+		.probe		= s3c64xx_i2s_probe,
+		.playback = {
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= S3C64XX_I2S_RATES,
+			.formats	= S3C64XX_I2S_FMTS,
+		},
+		.capture = {
+			 .channels_min	= 2,
+			 .channels_max	= 2,
+			 .rates		= S3C64XX_I2S_RATES,
+			 .formats	= S3C64XX_I2S_FMTS,
+		 },
+		.ops = &s3c64xx_i2s_dai_ops,
+		.symmetric_rates = 1,
 	},
-	.ops = &s3c64xx_i2s_dai_ops,
 };
 EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
 
+static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_i2sv2_info *i2s;
+	struct snd_soc_dai *dai;
+	int ret;
+
+	if (pdev->id >= ARRAY_SIZE(s3c64xx_i2s)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	i2s = &s3c64xx_i2s[pdev->id];
+	dai = &s3c64xx_i2s_dai[pdev->id];
+	dai->dev = &pdev->dev;
+
+	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
+	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
+
+	i2s->iis_cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(i2s->iis_cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(i2s->iis_cclk);
+		goto err;
+	}
+
+	ret = s3c_i2sv2_probe(pdev, dai, i2s, 0);
+	if (ret)
+		goto err_clk;
+
+	ret = s3c_i2sv2_register_dai(dai);
+	if (ret != 0)
+		goto err_i2sv2;
+
+	return 0;
+
+err_i2sv2:
+	/* Not implemented for I2Sv2 core yet */
+err_clk:
+	clk_put(i2s->iis_cclk);
+err:
+	return ret;
+}
+
+static __devexit int s3c64xx_iis_dev_remove(struct platform_device *pdev)
+{
+	dev_err(&pdev->dev, "Device removal not yet supported\n");
+	return 0;
+}
+
+static struct platform_driver s3c64xx_iis_driver = {
+	.probe  = s3c64xx_iis_dev_probe,
+	.remove = s3c64xx_iis_dev_remove,
+	.driver = {
+		.name = "s3c64xx-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
 static int __init s3c64xx_i2s_init(void)
 {
-	return  s3c_i2sv2_register_dai(&s3c64xx_i2s_dai);
+	return platform_driver_register(&s3c64xx_iis_driver);
 }
 module_init(s3c64xx_i2s_init);
 
 static void __exit s3c64xx_i2s_exit(void)
 {
-	snd_soc_unregister_dai(&s3c64xx_i2s_dai);
+	platform_driver_unregister(&s3c64xx_iis_driver);
 }
 module_exit(s3c64xx_i2s_exit);
 
@@ -217,6 +269,3 @@ module_exit(s3c64xx_i2s_exit);
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
 MODULE_LICENSE("GPL");
-
-
-
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h
index b7ffe3c38b6..02148cee261 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.h
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.h
@@ -15,6 +15,8 @@
 #ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H
 #define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__
 
+struct clk;
+
 #include "s3c-i2s-v2.h"
 
 #define S3C64XX_DIV_BCLK	S3C_I2SV2_DIV_BCLK
@@ -24,8 +26,8 @@
 #define S3C64XX_CLKSRC_PCLK	(0)
 #define S3C64XX_CLKSRC_MUX	(1)
 
-extern struct snd_soc_dai s3c64xx_i2s_dai;
+extern struct snd_soc_dai s3c64xx_i2s_dai[];
 
-extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai);
+extern struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai);
 
 #endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */
diff --git a/sound/soc/s6000/Kconfig b/sound/soc/s6000/Kconfig
new file mode 100644
index 00000000000..c74eb3d4a47
--- /dev/null
+++ b/sound/soc/s6000/Kconfig
@@ -0,0 +1,19 @@
+config SND_S6000_SOC
+	tristate "SoC Audio for the Stretch s6000 family"
+	depends on XTENSA_VARIANT_S6000
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  s6000 family chips. You will also need to select the platform
+	  to support below.
+
+config SND_S6000_SOC_I2S
+	tristate
+
+config SND_S6000_SOC_S6IPCAM
+	tristate "SoC Audio support for Stretch 6105 IP Camera"
+	depends on SND_S6000_SOC && XTENSA_PLATFORM_S6105
+	select SND_S6000_SOC_I2S
+	select SND_SOC_TLV320AIC3X
+	help
+	  Say Y if you want to add support for SoC audio on the
+	  Stretch s6105 IP Camera Reference Design.
diff --git a/sound/soc/s6000/Makefile b/sound/soc/s6000/Makefile
new file mode 100644
index 00000000000..7a613612e01
--- /dev/null
+++ b/sound/soc/s6000/Makefile
@@ -0,0 +1,11 @@
+# s6000 Platform Support
+snd-soc-s6000-objs := s6000-pcm.o
+snd-soc-s6000-i2s-objs := s6000-i2s.o
+
+obj-$(CONFIG_SND_S6000_SOC) += snd-soc-s6000.o
+obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
+
+# s6105 Machine Support
+snd-soc-s6ipcam-objs := s6105-ipcam.o
+
+obj-$(CONFIG_SND_S6000_SOC_S6IPCAM) += snd-soc-s6ipcam.o
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
new file mode 100644
index 00000000000..c5cda187eca
--- /dev/null
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -0,0 +1,629 @@
+/*
+ * ALSA SoC I2S Audio Layer for the Stretch S6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "s6000-i2s.h"
+#include "s6000-pcm.h"
+
+struct s6000_i2s_dev {
+	dma_addr_t sifbase;
+	u8 __iomem *scbbase;
+	unsigned int wide;
+	unsigned int channel_in;
+	unsigned int channel_out;
+	unsigned int lines_in;
+	unsigned int lines_out;
+	struct s6000_pcm_dma_params dma_params;
+};
+
+#define S6_I2S_INTERRUPT_STATUS	0x00
+#define   S6_I2S_INT_OVERRUN	1
+#define   S6_I2S_INT_UNDERRUN	2
+#define   S6_I2S_INT_ALIGNMENT	4
+#define S6_I2S_INTERRUPT_ENABLE	0x04
+#define S6_I2S_INTERRUPT_RAW	0x08
+#define S6_I2S_INTERRUPT_CLEAR	0x0C
+#define S6_I2S_INTERRUPT_SET	0x10
+#define S6_I2S_MODE		0x20
+#define   S6_I2S_DUAL		0
+#define   S6_I2S_WIDE		1
+#define S6_I2S_TX_DEFAULT	0x24
+#define S6_I2S_DATA_CFG(c)	(0x40 + 0x10 * (c))
+#define   S6_I2S_IN		0
+#define   S6_I2S_OUT		1
+#define   S6_I2S_UNUSED		2
+#define S6_I2S_INTERFACE_CFG(c)	(0x44 + 0x10 * (c))
+#define   S6_I2S_DIV_MASK	0x001fff
+#define   S6_I2S_16BIT		0x000000
+#define   S6_I2S_20BIT		0x002000
+#define   S6_I2S_24BIT		0x004000
+#define   S6_I2S_32BIT		0x006000
+#define   S6_I2S_BITS_MASK	0x006000
+#define   S6_I2S_MEM_16BIT	0x000000
+#define   S6_I2S_MEM_32BIT	0x008000
+#define   S6_I2S_MEM_MASK	0x008000
+#define   S6_I2S_CHANNELS_SHIFT	16
+#define   S6_I2S_CHANNELS_MASK	0x030000
+#define   S6_I2S_SCK_IN		0x000000
+#define   S6_I2S_SCK_OUT	0x040000
+#define   S6_I2S_SCK_DIR	0x040000
+#define   S6_I2S_WS_IN		0x000000
+#define   S6_I2S_WS_OUT		0x080000
+#define   S6_I2S_WS_DIR		0x080000
+#define   S6_I2S_LEFT_FIRST	0x000000
+#define   S6_I2S_RIGHT_FIRST	0x100000
+#define   S6_I2S_FIRST		0x100000
+#define   S6_I2S_CUR_SCK	0x200000
+#define   S6_I2S_CUR_WS		0x400000
+#define S6_I2S_ENABLE(c)	(0x48 + 0x10 * (c))
+#define   S6_I2S_DISABLE_IF	0x02
+#define   S6_I2S_ENABLE_IF	0x03
+#define   S6_I2S_IS_BUSY	0x04
+#define   S6_I2S_DMA_ACTIVE	0x08
+#define   S6_I2S_IS_ENABLED	0x10
+
+#define S6_I2S_NUM_LINES	4
+
+#define S6_I2S_SIF_PORT0	0x0000000
+#define S6_I2S_SIF_PORT1	0x0000080 /* docs say 0x0000010 */
+
+static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
+{
+	writel(val, dev->scbbase + reg);
+}
+
+static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
+{
+	return readl(dev->scbbase + reg);
+}
+
+static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
+				  u32 mask, u32 val)
+{
+	val ^= s6_i2s_read_reg(dev, reg) & ~mask;
+	s6_i2s_write_reg(dev, reg, val);
+}
+
+static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
+{
+	int i, j, cur, prev;
+
+	/*
+	 * Wait for WCLK to toggle 5 times before enabling the channel
+	 * s6000 Family Datasheet 3.6.4:
+	 *   "At least two cycles of WS must occur between commands
+	 *    to disable or enable the interface"
+	 */
+	j = 0;
+	prev = ~S6_I2S_CUR_WS;
+	for (i = 1000000; --i && j < 6; ) {
+		cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
+		       & S6_I2S_CUR_WS;
+		if (prev != cur) {
+			prev = cur;
+			j++;
+		}
+	}
+	if (j < 6)
+		printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
+
+	s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
+}
+
+static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
+{
+	s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
+}
+
+static void s6000_i2s_start(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
+	int channel;
+
+	channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			dev->channel_out : dev->channel_in;
+
+	s6000_i2s_start_channel(dev, channel);
+}
+
+static void s6000_i2s_stop(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
+	int channel;
+
+	channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			dev->channel_out : dev->channel_in;
+
+	s6000_i2s_stop_channel(dev, channel);
+}
+
+static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			     int after)
+{
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
+			s6000_i2s_start(substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (!after)
+			s6000_i2s_stop(substream);
+	}
+	return 0;
+}
+
+static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
+{
+	unsigned int pending;
+	pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
+	pending &= S6_I2S_INT_ALIGNMENT |
+		   S6_I2S_INT_UNDERRUN |
+		   S6_I2S_INT_OVERRUN;
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
+
+	return pending;
+}
+
+static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
+{
+	struct s6000_i2s_dev *dev = cpu_dai->private_data;
+	unsigned int errors;
+	unsigned int ret;
+
+	errors = s6000_i2s_int_sources(dev);
+	if (likely(!errors))
+		return 0;
+
+	ret = 0;
+	if (errors & S6_I2S_INT_ALIGNMENT)
+		printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
+	if (errors & S6_I2S_INT_UNDERRUN)
+		ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
+	if (errors & S6_I2S_INT_OVERRUN)
+		ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
+	return ret;
+}
+
+static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
+{
+	int channel;
+	int n = 50;
+	for (channel = 0; channel < 2; channel++) {
+		while (--n >= 0) {
+			int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
+			if ((v & S6_I2S_IS_ENABLED)
+			    || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
+				break;
+			udelay(20);
+		}
+	}
+	if (n < 0)
+		printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
+}
+
+static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+				   unsigned int fmt)
+{
+	struct s6000_i2s_dev *dev = cpu_dai->private_data;
+	u32 w;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		w |= S6_I2S_LEFT_FIRST;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		w |= S6_I2S_RIGHT_FIRST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
+		       S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
+		       S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
+
+	return 0;
+}
+
+static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+
+	if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
+		return -EINVAL;
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
+		       S6_I2S_DIV_MASK, div / 2 - 1);
+	return 0;
+}
+
+static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *params,
+			       struct snd_soc_dai *dai)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+	int interf;
+	u32 w = 0;
+
+	if (dev->wide)
+		interf = 0;
+	else {
+		w |= (((params_channels(params) - 2) / 2)
+		      << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
+		interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				? dev->channel_out : dev->channel_in;
+	}
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
+		break;
+	default:
+		printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
+		       params_format(params));
+		return -EINVAL;
+	}
+
+	if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
+	     & S6_I2S_IS_ENABLED) {
+		printk(KERN_ERR "s6000-i2s: interface already enabled\n");
+		return -EBUSY;
+	}
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
+		       S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
+		       w);
+
+	return 0;
+}
+
+static int s6000_i2s_dai_probe(struct platform_device *pdev,
+			       struct snd_soc_dai *dai)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+	struct s6000_snd_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+	dev->wide = pdata->wide;
+	dev->channel_in = pdata->channel_in;
+	dev->channel_out = pdata->channel_out;
+	dev->lines_in = pdata->lines_in;
+	dev->lines_out = pdata->lines_out;
+
+	s6_i2s_write_reg(dev, S6_I2S_MODE,
+			 dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
+
+	if (dev->wide) {
+		int i;
+
+		if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
+			return -EINVAL;
+
+		dev->channel_in = 0;
+		dev->channel_out = 1;
+		dai->capture.channels_min = 2 * dev->lines_in;
+		dai->capture.channels_max = dai->capture.channels_min;
+		dai->playback.channels_min = 2 * dev->lines_out;
+		dai->playback.channels_max = dai->playback.channels_min;
+
+		for (i = 0; i < dev->lines_out; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
+
+		for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
+					 S6_I2S_UNUSED);
+
+		for (; i < S6_I2S_NUM_LINES; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
+	} else {
+		unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
+
+		if (dev->lines_in > 1 || dev->lines_out > 1)
+			return -EINVAL;
+
+		dai->capture.channels_min = 2 * dev->lines_in;
+		dai->capture.channels_max = 8 * dev->lines_in;
+		dai->playback.channels_min = 2 * dev->lines_out;
+		dai->playback.channels_max = 8 * dev->lines_out;
+
+		if (dev->lines_in)
+			cfg[dev->channel_in] = S6_I2S_IN;
+		if (dev->lines_out)
+			cfg[dev->channel_out] = S6_I2S_OUT;
+
+		s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
+		s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
+	}
+
+	if (dev->lines_out) {
+		if (dev->lines_in) {
+			if (!dev->dma_params.dma_out)
+				return -ENODEV;
+		} else {
+			dev->dma_params.dma_out = dev->dma_params.dma_in;
+			dev->dma_params.dma_in = 0;
+		}
+	}
+	dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
+					S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
+	dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
+					S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
+	dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
+	return 0;
+}
+
+#define S6000_I2S_RATES	(SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
+			 SNDRV_PCM_RATE_8000_192000)
+#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops s6000_i2s_dai_ops = {
+	.set_fmt = s6000_i2s_set_dai_fmt,
+	.set_clkdiv = s6000_i2s_set_clkdiv,
+	.hw_params = s6000_i2s_hw_params,
+};
+
+struct snd_soc_dai s6000_i2s_dai = {
+	.name = "s6000-i2s",
+	.id = 0,
+	.probe = s6000_i2s_dai_probe,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.formats = S6000_I2S_FORMATS,
+		.rates = S6000_I2S_RATES,
+		.rate_min = 0,
+		.rate_max = 1562500,
+	},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.formats = S6000_I2S_FORMATS,
+		.rates = S6000_I2S_RATES,
+		.rate_min = 0,
+		.rate_max = 1562500,
+	},
+	.ops = &s6000_i2s_dai_ops,
+}
+EXPORT_SYMBOL_GPL(s6000_i2s_dai);
+
+static int __devinit s6000_i2s_probe(struct platform_device *pdev)
+{
+	struct s6000_i2s_dev *dev;
+	struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
+	u8 __iomem *mmio;
+	int ret;
+
+	scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!scbmem) {
+		dev_err(&pdev->dev, "no mem resource?\n");
+		ret = -ENODEV;
+		goto err_release_none;
+	}
+
+	region = request_mem_region(scbmem->start,
+				    scbmem->end - scbmem->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S SCB region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_none;
+	}
+
+	mmio = ioremap(scbmem->start, scbmem->end - scbmem->start + 1);
+	if (!mmio) {
+		dev_err(&pdev->dev, "can't ioremap SCB region\n");
+		ret = -ENOMEM;
+		goto err_release_scb;
+	}
+
+	sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!sifmem) {
+		dev_err(&pdev->dev, "no second mem resource?\n");
+		ret = -ENODEV;
+		goto err_release_map;
+	}
+
+	region = request_mem_region(sifmem->start,
+				    sifmem->end - sifmem->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S SIF region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_map;
+	}
+
+	dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dma1) {
+		dev_err(&pdev->dev, "no dma resource?\n");
+		ret = -ENODEV;
+		goto err_release_sif;
+	}
+
+	region = request_mem_region(dma1->start, dma1->end - dma1->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S DMA region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_sif;
+	}
+
+	dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (dma2) {
+		region = request_mem_region(dma2->start,
+					    dma2->end - dma2->start + 1,
+					    pdev->name);
+		if (!region) {
+			dev_err(&pdev->dev,
+				"I2S DMA region already claimed\n");
+			ret = -EBUSY;
+			goto err_release_dma1;
+		}
+	}
+
+	dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err_release_dma2;
+	}
+
+	s6000_i2s_dai.dev = &pdev->dev;
+	s6000_i2s_dai.private_data = dev;
+	s6000_i2s_dai.dma_data = &dev->dma_params;
+
+	dev->sifbase = sifmem->start;
+	dev->scbbase = mmio;
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
+			 S6_I2S_INT_ALIGNMENT |
+			 S6_I2S_INT_UNDERRUN |
+			 S6_I2S_INT_OVERRUN);
+
+	s6000_i2s_stop_channel(dev, 0);
+	s6000_i2s_stop_channel(dev, 1);
+	s6000_i2s_wait_disabled(dev);
+
+	dev->dma_params.check_xrun = s6000_i2s_check_xrun;
+	dev->dma_params.trigger = s6000_i2s_trigger;
+	dev->dma_params.dma_in = dma1->start;
+	dev->dma_params.dma_out = dma2 ? dma2->start : 0;
+	dev->dma_params.irq = platform_get_irq(pdev, 0);
+	if (dev->dma_params.irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		ret = -ENODEV;
+		goto err_release_dev;
+	}
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
+			 S6_I2S_INT_ALIGNMENT |
+			 S6_I2S_INT_UNDERRUN |
+			 S6_I2S_INT_OVERRUN);
+
+	ret = snd_soc_register_dai(&s6000_i2s_dai);
+	if (ret)
+		goto err_release_dev;
+
+	return 0;
+
+err_release_dev:
+	kfree(dev);
+err_release_dma2:
+	if (dma2)
+		release_mem_region(dma2->start, dma2->end - dma2->start + 1);
+err_release_dma1:
+	release_mem_region(dma1->start, dma1->end - dma1->start + 1);
+err_release_sif:
+	release_mem_region(sifmem->start, (sifmem->end - sifmem->start) + 1);
+err_release_map:
+	iounmap(mmio);
+err_release_scb:
+	release_mem_region(scbmem->start, (scbmem->end - scbmem->start) + 1);
+err_release_none:
+	return ret;
+}
+
+static void __devexit s6000_i2s_remove(struct platform_device *pdev)
+{
+	struct s6000_i2s_dev *dev = s6000_i2s_dai.private_data;
+	struct resource *region;
+	void __iomem *mmio = dev->scbbase;
+
+	snd_soc_unregister_dai(&s6000_i2s_dai);
+
+	s6000_i2s_stop_channel(dev, 0);
+	s6000_i2s_stop_channel(dev, 1);
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
+	s6000_i2s_dai.private_data = 0;
+	kfree(dev);
+
+	region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	release_mem_region(region->start, region->end - region->start + 1);
+
+	region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (region)
+		release_mem_region(region->start,
+				   region->end - region->start + 1);
+
+	region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(region->start, (region->end - region->start) + 1);
+
+	iounmap(mmio);
+	region = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_mem_region(region->start, (region->end - region->start) + 1);
+}
+
+static struct platform_driver s6000_i2s_driver = {
+	.probe  = s6000_i2s_probe,
+	.remove = __devexit_p(s6000_i2s_remove),
+	.driver = {
+		.name   = "s6000-i2s",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init s6000_i2s_init(void)
+{
+	return platform_driver_register(&s6000_i2s_driver);
+}
+module_init(s6000_i2s_init);
+
+static void __exit s6000_i2s_exit(void)
+{
+	platform_driver_unregister(&s6000_i2s_driver);
+}
+module_exit(s6000_i2s_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-i2s.h b/sound/soc/s6000/s6000-i2s.h
new file mode 100644
index 00000000000..2375fdfe6db
--- /dev/null
+++ b/sound/soc/s6000/s6000-i2s.h
@@ -0,0 +1,25 @@
+/*
+ * ALSA SoC I2S Audio Layer for the Stretch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _S6000_I2S_H
+#define _S6000_I2S_H
+
+extern struct snd_soc_dai s6000_i2s_dai;
+
+struct s6000_snd_platform_data {
+	int lines_in;
+	int lines_out;
+	int channel_in;
+	int channel_out;
+	int wide;
+	int same_rate;
+};
+#endif
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
new file mode 100644
index 00000000000..83b8028e209
--- /dev/null
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -0,0 +1,497 @@
+/*
+ * ALSA PCM interface for the Stetch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <variant/dmac.h>
+
+#include "s6000-pcm.h"
+
+#define S6_PCM_PREALLOCATE_SIZE (96 * 1024)
+#define S6_PCM_PREALLOCATE_MAX  (2048 * 1024)
+
+static struct snd_pcm_hardware s6000_pcm_hardware = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE),
+	.rates = (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
+		  SNDRV_PCM_RATE_8000_192000),
+	.rate_min = 0,
+	.rate_max = 1562500,
+	.channels_min = 2,
+	.channels_max = 8,
+	.buffer_bytes_max = 0x7ffffff0,
+	.period_bytes_min = 16,
+	.period_bytes_max = 0xfffff0,
+	.periods_min = 2,
+	.periods_max = 1024, /* no limit */
+	.fifo_size = 0,
+};
+
+struct s6000_runtime_data {
+	spinlock_t lock;
+	int period;		/* current DMA period */
+};
+
+static void s6000_pcm_enqueue_dma(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int channel;
+	unsigned int period_size;
+	unsigned int dma_offset;
+	dma_addr_t dma_pos;
+	dma_addr_t src, dst;
+
+	period_size = snd_pcm_lib_period_bytes(substream);
+	dma_offset = prtd->period * period_size;
+	dma_pos = runtime->dma_addr + dma_offset;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		src = dma_pos;
+		dst = par->sif_out;
+		channel = par->dma_out;
+	} else {
+		src = par->sif_in;
+		dst = dma_pos;
+		channel = par->dma_in;
+	}
+
+	if (!s6dmac_channel_enabled(DMA_MASK_DMAC(channel),
+				    DMA_INDEX_CHNL(channel)))
+		return;
+
+	if (s6dmac_fifo_full(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel))) {
+		printk(KERN_ERR "s6000-pcm: fifo full\n");
+		return;
+	}
+
+	BUG_ON(period_size & 15);
+	s6dmac_put_fifo(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel),
+			src, dst, period_size);
+
+	prtd->period++;
+	if (unlikely(prtd->period >= runtime->periods))
+		prtd->period = 0;
+}
+
+static irqreturn_t s6000_pcm_irq(int irq, void *data)
+{
+	struct snd_pcm *pcm = data;
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+	struct s6000_runtime_data *prtd;
+	unsigned int has_xrun;
+	int i, ret = IRQ_NONE;
+	u32 channel[2] = {
+		[SNDRV_PCM_STREAM_PLAYBACK] = params->dma_out,
+		[SNDRV_PCM_STREAM_CAPTURE] = params->dma_in
+	};
+
+	has_xrun = params->check_xrun(runtime->dai->cpu_dai);
+
+	for (i = 0; i < ARRAY_SIZE(channel); ++i) {
+		struct snd_pcm_substream *substream = pcm->streams[i].substream;
+		unsigned int pending;
+
+		if (!channel[i])
+			continue;
+
+		if (unlikely(has_xrun & (1 << i)) &&
+		    substream->runtime &&
+		    snd_pcm_running(substream)) {
+			dev_dbg(pcm->dev, "xrun\n");
+			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+			ret = IRQ_HANDLED;
+		}
+
+		pending = s6dmac_int_sources(DMA_MASK_DMAC(channel[i]),
+					     DMA_INDEX_CHNL(channel[i]));
+
+		if (pending & 1) {
+			ret = IRQ_HANDLED;
+			if (likely(substream->runtime &&
+				   snd_pcm_running(substream))) {
+				snd_pcm_period_elapsed(substream);
+				dev_dbg(pcm->dev, "period elapsed %x %x\n",
+				       s6dmac_cur_src(DMA_MASK_DMAC(channel[i]),
+						   DMA_INDEX_CHNL(channel[i])),
+				       s6dmac_cur_dst(DMA_MASK_DMAC(channel[i]),
+						   DMA_INDEX_CHNL(channel[i])));
+				prtd = substream->runtime->private_data;
+				spin_lock(&prtd->lock);
+				s6000_pcm_enqueue_dma(substream);
+				spin_unlock(&prtd->lock);
+			}
+		}
+
+		if (unlikely(pending & ~7)) {
+			if (pending & (1 << 3))
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Underflow\n",
+				       channel[i]);
+			if (pending & (1 << 4))
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Overflow\n",
+				       channel[i]);
+			if (pending & 0x1e0)
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Master Error "
+				       "(mask %x)\n",
+				       channel[i], pending >> 5);
+
+		}
+	}
+
+	return ret;
+}
+
+static int s6000_pcm_start(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	unsigned long flags;
+	int srcinc;
+	u32 dma;
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		srcinc = 1;
+		dma = par->dma_out;
+	} else {
+		srcinc = 0;
+		dma = par->dma_in;
+	}
+	s6dmac_enable_chan(DMA_MASK_DMAC(dma), DMA_INDEX_CHNL(dma),
+			   1 /* priority 1 (0 is max) */,
+			   0 /* peripheral requests w/o xfer length mode */,
+			   srcinc /* source address increment */,
+			   srcinc^1 /* destination address increment */,
+			   0 /* chunksize 0 (skip impossible on this dma) */,
+			   0 /* source skip after chunk (impossible) */,
+			   0 /* destination skip after chunk (impossible) */,
+			   4 /* 16 byte burst size */,
+			   -1 /* don't conserve bandwidth */,
+			   0 /* low watermark irq descriptor theshold */,
+			   0 /* disable hardware timestamps */,
+			   1 /* enable channel */);
+
+	s6000_pcm_enqueue_dma(substream);
+	s6000_pcm_enqueue_dma(substream);
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	return 0;
+}
+
+static int s6000_pcm_stop(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	unsigned long flags;
+	u32 channel;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		channel = par->dma_out;
+	else
+		channel = par->dma_in;
+
+	s6dmac_set_terminal_count(DMA_MASK_DMAC(channel),
+				  DMA_INDEX_CHNL(channel), 0);
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	s6dmac_disable_chan(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel));
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	return 0;
+}
+
+static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int ret;
+
+	ret = par->trigger(substream, cmd, 0);
+	if (ret < 0)
+		return ret;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ret = s6000_pcm_start(substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ret = s6000_pcm_stop(substream);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (ret < 0)
+		return ret;
+
+	return par->trigger(substream, cmd, 1);
+}
+
+static int s6000_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+
+	prtd->period = 0;
+
+	return 0;
+}
+
+static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+	unsigned long flags;
+	unsigned int offset;
+	dma_addr_t count;
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		count = s6dmac_cur_src(DMA_MASK_DMAC(par->dma_out),
+				       DMA_INDEX_CHNL(par->dma_out));
+	else
+		count = s6dmac_cur_dst(DMA_MASK_DMAC(par->dma_in),
+				       DMA_INDEX_CHNL(par->dma_in));
+
+	count -= runtime->dma_addr;
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	offset = bytes_to_frames(runtime, count);
+	if (unlikely(offset >= runtime->buffer_size))
+		offset = 0;
+
+	return offset;
+}
+
+static int s6000_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd;
+	int ret;
+
+	snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware);
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
+	if (ret < 0)
+		return ret;
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
+	if (ret < 0)
+		return ret;
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+
+	if (par->same_rate) {
+		int rate;
+		spin_lock(&par->lock); /* needed? */
+		rate = par->rate;
+		spin_unlock(&par->lock);
+		if (rate != -1) {
+			ret = snd_pcm_hw_constraint_minmax(runtime,
+							SNDRV_PCM_HW_PARAM_RATE,
+							rate, rate);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	prtd = kzalloc(sizeof(struct s6000_runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+
+	return 0;
+}
+
+static int s6000_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int s6000_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int ret;
+	ret = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+	if (ret < 0) {
+		printk(KERN_WARNING "s6000-pcm: allocation of memory failed\n");
+		return ret;
+	}
+
+	if (par->same_rate) {
+		spin_lock(&par->lock);
+		if (par->rate == -1 ||
+		    !(par->in_use & ~(1 << substream->stream))) {
+			par->rate = params_rate(hw_params);
+			par->in_use |= 1 << substream->stream;
+		} else if (params_rate(hw_params) != par->rate) {
+			snd_pcm_lib_free_pages(substream);
+			par->in_use &= ~(1 << substream->stream);
+			ret = -EBUSY;
+		}
+		spin_unlock(&par->lock);
+	}
+	return ret;
+}
+
+static int s6000_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+
+	spin_lock(&par->lock);
+	par->in_use &= ~(1 << substream->stream);
+	if (!par->in_use)
+		par->rate = -1;
+	spin_unlock(&par->lock);
+
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static struct snd_pcm_ops s6000_pcm_ops = {
+	.open = 	s6000_pcm_open,
+	.close = 	s6000_pcm_close,
+	.ioctl = 	snd_pcm_lib_ioctl,
+	.hw_params = 	s6000_pcm_hw_params,
+	.hw_free = 	s6000_pcm_hw_free,
+	.trigger =	s6000_pcm_trigger,
+	.prepare = 	s6000_pcm_prepare,
+	.pointer = 	s6000_pcm_pointer,
+};
+
+static void s6000_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+
+	free_irq(params->irq, pcm);
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static u64 s6000_pcm_dmamask = DMA_32BIT_MASK;
+
+static int s6000_pcm_new(struct snd_card *card,
+			 struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+	int res;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &s6000_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_32BIT_MASK;
+
+	if (params->dma_in) {
+		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
+				    DMA_INDEX_CHNL(params->dma_in));
+		s6dmac_int_sources(DMA_MASK_DMAC(params->dma_in),
+				   DMA_INDEX_CHNL(params->dma_in));
+	}
+
+	if (params->dma_out) {
+		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_out),
+				    DMA_INDEX_CHNL(params->dma_out));
+		s6dmac_int_sources(DMA_MASK_DMAC(params->dma_out),
+				   DMA_INDEX_CHNL(params->dma_out));
+	}
+
+	res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
+			  s6000_soc_platform.name, pcm);
+	if (res) {
+		printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
+		return res;
+	}
+
+	res = snd_pcm_lib_preallocate_pages_for_all(pcm,
+						    SNDRV_DMA_TYPE_DEV,
+						    card->dev,
+						    S6_PCM_PREALLOCATE_SIZE,
+						    S6_PCM_PREALLOCATE_MAX);
+	if (res)
+		printk(KERN_WARNING "s6000-pcm: preallocation failed\n");
+
+	spin_lock_init(&params->lock);
+	params->in_use = 0;
+	params->rate = -1;
+	return 0;
+}
+
+struct snd_soc_platform s6000_soc_platform = {
+	.name = 	"s6000-audio",
+	.pcm_ops = 	&s6000_pcm_ops,
+	.pcm_new = 	s6000_pcm_new,
+	.pcm_free = 	s6000_pcm_free,
+};
+EXPORT_SYMBOL_GPL(s6000_soc_platform);
+
+static int __init s6000_pcm_init(void)
+{
+	return snd_soc_register_platform(&s6000_soc_platform);
+}
+module_init(s6000_pcm_init);
+
+static void __exit s6000_pcm_exit(void)
+{
+	snd_soc_unregister_platform(&s6000_soc_platform);
+}
+module_exit(s6000_pcm_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6000 family PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-pcm.h b/sound/soc/s6000/s6000-pcm.h
new file mode 100644
index 00000000000..96f23f6f52b
--- /dev/null
+++ b/sound/soc/s6000/s6000-pcm.h
@@ -0,0 +1,35 @@
+/*
+ * ALSA PCM interface for the Stretch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _S6000_PCM_H
+#define _S6000_PCM_H
+
+struct snd_soc_dai;
+struct snd_pcm_substream;
+
+struct s6000_pcm_dma_params {
+	unsigned int (*check_xrun)(struct snd_soc_dai *cpu_dai);
+	int (*trigger)(struct snd_pcm_substream *substream, int cmd, int after);
+	dma_addr_t sif_in;
+	dma_addr_t sif_out;
+	u32 dma_in;
+	u32 dma_out;
+	int irq;
+	int same_rate;
+
+	spinlock_t lock;
+	int in_use;
+	int rate;
+};
+
+extern struct snd_soc_platform s6000_soc_platform;
+
+#endif
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
new file mode 100644
index 00000000000..b5f95f9781c
--- /dev/null
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -0,0 +1,244 @@
+/*
+ * ASoC driver for Stretch s6105 IP camera platform
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <variant/dmac.h>
+
+#include "../codecs/tlv320aic3x.h"
+#include "s6000-pcm.h"
+#include "s6000-i2s.h"
+
+#define S6105_CAM_CODEC_CLOCK 12288000
+
+static int s6105_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret = 0;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+					     SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM |
+					   SND_SOC_DAIFMT_NB_NF);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, S6105_CAM_CODEC_CLOCK,
+					    SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops s6105_ops = {
+	.hw_params = s6105_hw_params,
+};
+
+/* s6105 machine dapm widgets */
+static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("Audio Out Differential", NULL),
+	SND_SOC_DAPM_LINE("Audio Out Stereo", NULL),
+	SND_SOC_DAPM_LINE("Audio In", NULL),
+};
+
+/* s6105 machine audio_mapnections to the codec pins */
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Audio Out connected to HPLOUT, HPLCOM, HPROUT */
+	{"Audio Out Differential", NULL, "HPLOUT"},
+	{"Audio Out Differential", NULL, "HPLCOM"},
+	{"Audio Out Stereo", NULL, "HPLOUT"},
+	{"Audio Out Stereo", NULL, "HPROUT"},
+
+	/* Audio In connected to LINE1L, LINE1R */
+	{"LINE1L", NULL, "Audio In"},
+	{"LINE1R", NULL, "Audio In"},
+};
+
+static int output_type_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item) {
+		uinfo->value.enumerated.item = 1;
+		strcpy(uinfo->value.enumerated.name, "HPLOUT/HPROUT");
+	} else {
+		strcpy(uinfo->value.enumerated.name, "HPLOUT/HPLCOM");
+	}
+	return 0;
+}
+
+static int output_type_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.enumerated.item[0] = kcontrol->private_value;
+	return 0;
+}
+
+static int output_type_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = kcontrol->private_data;
+	unsigned int val = (ucontrol->value.enumerated.item[0] != 0);
+	char *differential = "Audio Out Differential";
+	char *stereo = "Audio Out Stereo";
+
+	if (kcontrol->private_value == val)
+		return 0;
+	kcontrol->private_value = val;
+	snd_soc_dapm_disable_pin(codec, val ? differential : stereo);
+	snd_soc_dapm_sync(codec);
+	snd_soc_dapm_enable_pin(codec, val ? stereo : differential);
+	snd_soc_dapm_sync(codec);
+
+	return 1;
+}
+
+static const struct snd_kcontrol_new audio_out_mux = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Master Output Mux",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = output_type_info,
+	.get = output_type_get,
+	.put = output_type_put,
+	.private_value = 1 /* default to stereo */
+};
+
+/* Logic for a aic3x as connected on the s6105 ip camera ref design */
+static int s6105_aic3x_init(struct snd_soc_codec *codec)
+{
+	/* Add s6105 specific widgets */
+	snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets,
+				  ARRAY_SIZE(aic3x_dapm_widgets));
+
+	/* Set up s6105 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* not present */
+	snd_soc_dapm_nc_pin(codec, "MONO_LOUT");
+	snd_soc_dapm_nc_pin(codec, "LINE2L");
+	snd_soc_dapm_nc_pin(codec, "LINE2R");
+
+	/* not connected */
+	snd_soc_dapm_nc_pin(codec, "MIC3L"); /* LINE2L on this chip */
+	snd_soc_dapm_nc_pin(codec, "MIC3R"); /* LINE2R on this chip */
+	snd_soc_dapm_nc_pin(codec, "LLOUT");
+	snd_soc_dapm_nc_pin(codec, "RLOUT");
+	snd_soc_dapm_nc_pin(codec, "HPRCOM");
+
+	/* always connected */
+	snd_soc_dapm_enable_pin(codec, "Audio In");
+
+	/* must correspond to audio_out_mux.private_value initializer */
+	snd_soc_dapm_disable_pin(codec, "Audio Out Differential");
+	snd_soc_dapm_sync(codec);
+	snd_soc_dapm_enable_pin(codec, "Audio Out Stereo");
+
+	snd_soc_dapm_sync(codec);
+
+	snd_ctl_add(codec->card, snd_ctl_new1(&audio_out_mux, codec));
+
+	return 0;
+}
+
+/* s6105 digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link s6105_dai = {
+	.name = "TLV320AIC31",
+	.stream_name = "AIC31",
+	.cpu_dai = &s6000_i2s_dai,
+	.codec_dai = &aic3x_dai,
+	.init = s6105_aic3x_init,
+	.ops = &s6105_ops,
+};
+
+/* s6105 audio machine driver */
+static struct snd_soc_card snd_soc_card_s6105 = {
+	.name = "Stretch IP Camera",
+	.platform = &s6000_soc_platform,
+	.dai_link = &s6105_dai,
+	.num_links = 1,
+};
+
+/* s6105 audio private data */
+static struct aic3x_setup_data s6105_aic3x_setup = {
+	.i2c_bus = 0,
+	.i2c_address = 0x18,
+};
+
+/* s6105 audio subsystem */
+static struct snd_soc_device s6105_snd_devdata = {
+	.card = &snd_soc_card_s6105,
+	.codec_dev = &soc_codec_dev_aic3x,
+	.codec_data = &s6105_aic3x_setup,
+};
+
+static struct s6000_snd_platform_data __initdata s6105_snd_data = {
+	.wide		= 0,
+	.channel_in	= 0,
+	.channel_out	= 1,
+	.lines_in	= 1,
+	.lines_out	= 1,
+	.same_rate	= 1,
+};
+
+static struct platform_device *s6105_snd_device;
+
+static int __init s6105_init(void)
+{
+	int ret;
+
+	s6105_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s6105_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(s6105_snd_device, &s6105_snd_devdata);
+	s6105_snd_devdata.dev = &s6105_snd_device->dev;
+	platform_device_add_data(s6105_snd_device, &s6105_snd_data,
+				 sizeof(s6105_snd_data));
+
+	ret = platform_device_add(s6105_snd_device);
+	if (ret)
+		platform_device_put(s6105_snd_device);
+
+	return ret;
+}
+
+static void __exit s6105_exit(void)
+{
+	platform_device_unregister(s6105_snd_device);
+}
+
+module_init(s6105_init);
+module_exit(s6105_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6105 IP camera ASoC driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index 56fa0872abb..b378096cadb 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -145,7 +145,7 @@ static int ssi_hw_params(struct snd_pcm_substream *substream,
 	recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
 
 	pr_debug("ssi_hw_params() enter\nssicr was    %08lx\n", ssicr);
-	pr_debug("bits: %d channels: %d\n", bits, channels);
+	pr_debug("bits: %u channels: %u\n", bits, channels);
 
 	ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
 		   CR_SWL_MASK);
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 1cd149b9ce6..1d70829464e 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -113,6 +113,35 @@ static int soc_ac97_dev_register(struct snd_soc_codec *codec)
 }
 #endif
 
+static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_card *card = socdev->card;
+	struct snd_soc_dai_link *machine = rtd->dai;
+	struct snd_soc_dai *cpu_dai = machine->cpu_dai;
+	struct snd_soc_dai *codec_dai = machine->codec_dai;
+	int ret;
+
+	if (codec_dai->symmetric_rates || cpu_dai->symmetric_rates ||
+	    machine->symmetric_rates) {
+		dev_dbg(card->dev, "Symmetry forces %dHz rate\n", 
+			machine->rate);
+
+		ret = snd_pcm_hw_constraint_minmax(substream->runtime,
+						   SNDRV_PCM_HW_PARAM_RATE,
+						   machine->rate,
+						   machine->rate);
+		if (ret < 0) {
+			dev_err(card->dev,
+				"Unable to apply rate symmetry constraint: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * Called by ALSA when a PCM substream is opened, the runtime->hw record is
  * then initialized and any private data can be allocated. This also calls
@@ -221,6 +250,13 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 		goto machine_err;
 	}
 
+	/* Symmetry only applies if we've already got an active stream. */
+	if (cpu_dai->active || codec_dai->active) {
+		ret = soc_pcm_apply_symmetry(substream);
+		if (ret != 0)
+			goto machine_err;
+	}
+
 	pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
 	pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates);
 	pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min,
@@ -263,7 +299,6 @@ static void close_delayed_work(struct work_struct *work)
 {
 	struct snd_soc_card *card = container_of(work, struct snd_soc_card,
 						 delayed_work.work);
-	struct snd_soc_device *socdev = card->socdev;
 	struct snd_soc_codec *codec = card->codec;
 	struct snd_soc_dai *codec_dai;
 	int i;
@@ -279,27 +314,10 @@ static void close_delayed_work(struct work_struct *work)
 
 		/* are we waiting on this codec DAI stream */
 		if (codec_dai->pop_wait == 1) {
-
-			/* Reduce power if no longer active */
-			if (codec->active == 0) {
-				pr_debug("pop wq D1 %s %s\n", codec->name,
-					 codec_dai->playback.stream_name);
-				snd_soc_dapm_set_bias_level(socdev,
-					SND_SOC_BIAS_PREPARE);
-			}
-
 			codec_dai->pop_wait = 0;
 			snd_soc_dapm_stream_event(codec,
 				codec_dai->playback.stream_name,
 				SND_SOC_DAPM_STREAM_STOP);
-
-			/* Fall into standby if no longer active */
-			if (codec->active == 0) {
-				pr_debug("pop wq D3 %s %s\n", codec->name,
-					 codec_dai->playback.stream_name);
-				snd_soc_dapm_set_bias_level(socdev,
-					SND_SOC_BIAS_STANDBY);
-			}
 		}
 	}
 	mutex_unlock(&pcm_mutex);
@@ -363,10 +381,6 @@ static int soc_codec_close(struct snd_pcm_substream *substream)
 		snd_soc_dapm_stream_event(codec,
 			codec_dai->capture.stream_name,
 			SND_SOC_DAPM_STREAM_STOP);
-
-		if (codec->active == 0 && codec_dai->pop_wait == 0)
-			snd_soc_dapm_set_bias_level(socdev,
-						SND_SOC_BIAS_STANDBY);
 	}
 
 	mutex_unlock(&pcm_mutex);
@@ -431,36 +445,16 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream)
 		cancel_delayed_work(&card->delayed_work);
 	}
 
-	/* do we need to power up codec */
-	if (codec->bias_level != SND_SOC_BIAS_ON) {
-		snd_soc_dapm_set_bias_level(socdev,
-					    SND_SOC_BIAS_PREPARE);
-
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->playback.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-		else
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->capture.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-
-		snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON);
-		snd_soc_dai_digital_mute(codec_dai, 0);
-
-	} else {
-		/* codec already powered - power on widgets */
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->playback.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-		else
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->capture.stream_name,
-					SND_SOC_DAPM_STREAM_START);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		snd_soc_dapm_stream_event(codec,
+					  codec_dai->playback.stream_name,
+					  SND_SOC_DAPM_STREAM_START);
+	else
+		snd_soc_dapm_stream_event(codec,
+					  codec_dai->capture.stream_name,
+					  SND_SOC_DAPM_STREAM_START);
 
-		snd_soc_dai_digital_mute(codec_dai, 0);
-	}
+	snd_soc_dai_digital_mute(codec_dai, 0);
 
 out:
 	mutex_unlock(&pcm_mutex);
@@ -521,6 +515,8 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	machine->rate = params_rate(params);
+
 out:
 	mutex_unlock(&pcm_mutex);
 	return ret;
@@ -632,6 +628,12 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state)
 	struct snd_soc_codec *codec = card->codec;
 	int i;
 
+	/* If the initialization of this soc device failed, there is no codec
+	 * associated with it. Just bail out in this case.
+	 */
+	if (!codec)
+		return 0;
+
 	/* Due to the resume being scheduled into a workqueue we could
 	* suspend before that's finished - wait for it to complete.
 	 */
@@ -1334,6 +1336,7 @@ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid)
 		return ret;
 	}
 
+	codec->socdev = socdev;
 	codec->card->dev = socdev->dev;
 	codec->card->private_data = codec;
 	strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver));
@@ -1386,6 +1389,9 @@ int snd_soc_init_card(struct snd_soc_device *socdev)
 	snprintf(codec->card->longname, sizeof(codec->card->longname),
 		 "%s (%s)", card->name, codec->name);
 
+	/* Make sure all DAPM widgets are instantiated */
+	snd_soc_dapm_new_widgets(codec);
+
 	ret = snd_card_register(codec->card);
 	if (ret < 0) {
 		printk(KERN_ERR "asoc: failed to register soundcard for %s\n",
@@ -1744,7 +1750,7 @@ int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol,
 {
 	int max = kcontrol->private_value;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -1774,7 +1780,7 @@ int snd_soc_info_volsw(struct snd_kcontrol *kcontrol,
 	unsigned int shift = mc->shift;
 	unsigned int rshift = mc->rshift;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -1881,7 +1887,7 @@ int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol,
 		(struct soc_mixer_control *)kcontrol->private_value;
 	int max = mc->max;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -2065,7 +2071,7 @@ EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8);
 int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 	unsigned int freq, int dir)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_sysclk)
 		return dai->ops->set_sysclk(dai, clk_id, freq, dir);
 	else
 		return -EINVAL;
@@ -2085,7 +2091,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
 int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
 	int div_id, int div)
 {
-	if (dai->ops->set_clkdiv)
+	if (dai->ops && dai->ops->set_clkdiv)
 		return dai->ops->set_clkdiv(dai, div_id, div);
 	else
 		return -EINVAL;
@@ -2104,7 +2110,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv);
 int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
 	int pll_id, unsigned int freq_in, unsigned int freq_out)
 {
-	if (dai->ops->set_pll)
+	if (dai->ops && dai->ops->set_pll)
 		return dai->ops->set_pll(dai, pll_id, freq_in, freq_out);
 	else
 		return -EINVAL;
@@ -2120,7 +2126,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
  */
 int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
-	if (dai->ops->set_fmt)
+	if (dai->ops && dai->ops->set_fmt)
 		return dai->ops->set_fmt(dai, fmt);
 	else
 		return -EINVAL;
@@ -2139,7 +2145,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt);
 int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
 	unsigned int mask, int slots)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_tdm_slot)
 		return dai->ops->set_tdm_slot(dai, mask, slots);
 	else
 		return -EINVAL;
@@ -2155,7 +2161,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot);
  */
 int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_tristate)
 		return dai->ops->set_tristate(dai, tristate);
 	else
 		return -EINVAL;
@@ -2171,7 +2177,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate);
  */
 int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute)
 {
-	if (dai->ops->digital_mute)
+	if (dai->ops && dai->ops->digital_mute)
 		return dai->ops->digital_mute(dai, mute);
 	else
 		return -EINVAL;
@@ -2352,6 +2358,39 @@ void snd_soc_unregister_platform(struct snd_soc_platform *platform)
 }
 EXPORT_SYMBOL_GPL(snd_soc_unregister_platform);
 
+static u64 codec_format_map[] = {
+	SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE,
+	SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE,
+	SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE,
+	SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+	SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
+	SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE,
+	SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3BE,
+	SNDRV_PCM_FMTBIT_U24_3LE | SNDRV_PCM_FMTBIT_U24_3BE,
+	SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE,
+	SNDRV_PCM_FMTBIT_U20_3LE | SNDRV_PCM_FMTBIT_U20_3BE,
+	SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE,
+	SNDRV_PCM_FMTBIT_U18_3LE | SNDRV_PCM_FMTBIT_U18_3BE,
+	SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE,
+	SNDRV_PCM_FMTBIT_FLOAT64_LE | SNDRV_PCM_FMTBIT_FLOAT64_BE,
+	SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE
+	| SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
+};
+
+/* Fix up the DAI formats for endianness: codecs don't actually see
+ * the endianness of the data but we're using the CPU format
+ * definitions which do need to include endianness so we ensure that
+ * codec DAIs always have both big and little endian variants set.
+ */
+static void fixup_codec_formats(struct snd_soc_pcm_stream *stream)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(codec_format_map); i++)
+		if (stream->formats & codec_format_map[i])
+			stream->formats |= codec_format_map[i];
+}
+
 /**
  * snd_soc_register_codec - Register a codec with the ASoC core
  *
@@ -2359,6 +2398,8 @@ EXPORT_SYMBOL_GPL(snd_soc_unregister_platform);
  */
 int snd_soc_register_codec(struct snd_soc_codec *codec)
 {
+	int i;
+
 	if (!codec->name)
 		return -EINVAL;
 
@@ -2368,6 +2409,11 @@ int snd_soc_register_codec(struct snd_soc_codec *codec)
 
 	INIT_LIST_HEAD(&codec->list);
 
+	for (i = 0; i < codec->num_dai; i++) {
+		fixup_codec_formats(&codec->dai[i].playback);
+		fixup_codec_formats(&codec->dai[i].capture);
+	}
+
 	mutex_lock(&client_mutex);
 	list_add(&codec->list, &codec_list);
 	snd_soc_instantiate_cards();
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 735903a7467..21c69074aa1 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -12,7 +12,7 @@
  *  Features:
  *    o Changes power status of internal codec blocks depending on the
  *      dynamic configuration of codec internal audio paths and active
- *      DAC's/ADC's.
+ *      DACs/ADCs.
  *    o Platform power domain - can support external components i.e. amps and
  *      mic/meadphone insertion events.
  *    o Automatic Mic Bias support
@@ -52,23 +52,21 @@
 
 /* dapm power sequences - make this per codec in the future */
 static int dapm_up_seq[] = {
-	snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic,
-	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac,
-	snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga,
-	snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post
+	snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias,
+	snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
+	snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl,
+	snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
+	snd_soc_dapm_post
 };
 
 static int dapm_down_seq[] = {
 	snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
 	snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
 	snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
-	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post
+	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
+	snd_soc_dapm_post
 };
 
-static int dapm_status = 1;
-module_param(dapm_status, int, 0);
-MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries");
-
 static void pop_wait(u32 pop_time)
 {
 	if (pop_time)
@@ -96,6 +94,48 @@ static inline struct snd_soc_dapm_widget *dapm_cnew_widget(
 	return kmemdup(_widget, sizeof(*_widget), GFP_KERNEL);
 }
 
+/**
+ * snd_soc_dapm_set_bias_level - set the bias level for the system
+ * @socdev: audio device
+ * @level: level to configure
+ *
+ * Configure the bias (power) levels for the SoC audio device.
+ *
+ * Returns 0 for success else error.
+ */
+static int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
+				       enum snd_soc_bias_level level)
+{
+	struct snd_soc_card *card = socdev->card;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		dev_dbg(socdev->dev, "Setting full bias\n");
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		dev_dbg(socdev->dev, "Setting bias prepare\n");
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		dev_dbg(socdev->dev, "Setting standby bias\n");
+		break;
+	case SND_SOC_BIAS_OFF:
+		dev_dbg(socdev->dev, "Setting bias off\n");
+		break;
+	default:
+		dev_err(socdev->dev, "Setting invalid bias %d\n", level);
+		return -EINVAL;
+	}
+
+	if (card->set_bias_level)
+		ret = card->set_bias_level(card, level);
+	if (ret == 0 && codec->set_bias_level)
+		ret = codec->set_bias_level(codec, level);
+
+	return ret;
+}
+
 /* set up initial codec paths */
 static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	struct snd_soc_dapm_path *p, int i)
@@ -165,6 +205,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	case snd_soc_dapm_dac:
 	case snd_soc_dapm_micbias:
 	case snd_soc_dapm_vmid:
+	case snd_soc_dapm_supply:
 		p->connect = 1;
 	break;
 	/* does effect routing - dynamically connected */
@@ -179,7 +220,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	}
 }
 
-/* connect mux widget to it's interconnecting audio paths */
+/* connect mux widget to its interconnecting audio paths */
 static int dapm_connect_mux(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
 	struct snd_soc_dapm_path *path, const char *control_name,
@@ -202,7 +243,7 @@ static int dapm_connect_mux(struct snd_soc_codec *codec,
 	return -ENODEV;
 }
 
-/* connect mixer widget to it's interconnecting audio paths */
+/* connect mixer widget to its interconnecting audio paths */
 static int dapm_connect_mixer(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
 	struct snd_soc_dapm_path *path, const char *control_name)
@@ -357,8 +398,9 @@ static int dapm_new_mixer(struct snd_soc_codec *codec,
 				path->long_name);
 			ret = snd_ctl_add(codec->card, path->kcontrol);
 			if (ret < 0) {
-				printk(KERN_ERR "asoc: failed to add dapm kcontrol %s\n",
-						path->long_name);
+				printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n",
+				       path->long_name,
+				       ret);
 				kfree(path->long_name);
 				path->long_name = NULL;
 				return ret;
@@ -434,6 +476,9 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget)
 	struct snd_soc_dapm_path *path;
 	int con = 0;
 
+	if (widget->id == snd_soc_dapm_supply)
+		return 0;
+
 	if (widget->id == snd_soc_dapm_adc && widget->active)
 		return 1;
 
@@ -470,6 +515,9 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget)
 	struct snd_soc_dapm_path *path;
 	int con = 0;
 
+	if (widget->id == snd_soc_dapm_supply)
+		return 0;
+
 	/* active stream ? */
 	if (widget->id == snd_soc_dapm_dac && widget->active)
 		return 1;
@@ -521,84 +569,12 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w,
 }
 EXPORT_SYMBOL_GPL(dapm_reg_event);
 
-/*
- * Scan a single DAPM widget for a complete audio path and update the
- * power status appropriately.
+/* Standard power change method, used to apply power changes to most
+ * widgets.
  */
-static int dapm_power_widget(struct snd_soc_codec *codec, int event,
-			     struct snd_soc_dapm_widget *w)
+static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
 {
-	int in, out, power_change, power, ret;
-
-	/* vmid - no action */
-	if (w->id == snd_soc_dapm_vmid)
-		return 0;
-
-	/* active ADC */
-	if (w->id == snd_soc_dapm_adc && w->active) {
-		in = is_connected_input_ep(w);
-		dapm_clear_walk(w->codec);
-		w->power = (in != 0) ? 1 : 0;
-		dapm_update_bits(w);
-		return 0;
-	}
-
-	/* active DAC */
-	if (w->id == snd_soc_dapm_dac && w->active) {
-		out = is_connected_output_ep(w);
-		dapm_clear_walk(w->codec);
-		w->power = (out != 0) ? 1 : 0;
-		dapm_update_bits(w);
-		return 0;
-	}
-
-	/* pre and post event widgets */
-	if (w->id == snd_soc_dapm_pre) {
-		if (!w->event)
-			return 0;
-
-		if (event == SND_SOC_DAPM_STREAM_START) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_PRE_PMU);
-			if (ret < 0)
-				return ret;
-		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_PRE_PMD);
-			if (ret < 0)
-				return ret;
-		}
-		return 0;
-	}
-	if (w->id == snd_soc_dapm_post) {
-		if (!w->event)
-			return 0;
-
-		if (event == SND_SOC_DAPM_STREAM_START) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_POST_PMU);
-			if (ret < 0)
-				return ret;
-		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_POST_PMD);
-			if (ret < 0)
-				return ret;
-		}
-		return 0;
-	}
-
-	/* all other widgets */
-	in = is_connected_input_ep(w);
-	dapm_clear_walk(w->codec);
-	out = is_connected_output_ep(w);
-	dapm_clear_walk(w->codec);
-	power = (out != 0 && in != 0) ? 1 : 0;
-	power_change = (w->power == power) ? 0 : 1;
-	w->power = power;
-
-	if (!power_change)
-		return 0;
+	int ret;
 
 	/* call any power change event handlers */
 	if (w->event)
@@ -607,7 +583,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 			 w->name, w->event_flags);
 
 	/* power up pre event */
-	if (power && w->event &&
+	if (w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
 		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
 		if (ret < 0)
@@ -615,7 +591,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	}
 
 	/* power down pre event */
-	if (!power && w->event &&
+	if (!w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
 		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
 		if (ret < 0)
@@ -623,17 +599,17 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	}
 
 	/* Lower PGA volume to reduce pops */
-	if (w->id == snd_soc_dapm_pga && !power)
-		dapm_set_pga(w, power);
+	if (w->id == snd_soc_dapm_pga && !w->power)
+		dapm_set_pga(w, w->power);
 
 	dapm_update_bits(w);
 
 	/* Raise PGA volume to reduce pops */
-	if (w->id == snd_soc_dapm_pga && power)
-		dapm_set_pga(w, power);
+	if (w->id == snd_soc_dapm_pga && w->power)
+		dapm_set_pga(w, w->power);
 
 	/* power up post event */
-	if (power && w->event &&
+	if (w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
 		ret = w->event(w,
 			       NULL, SND_SOC_DAPM_POST_PMU);
@@ -642,7 +618,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	}
 
 	/* power down post event */
-	if (!power && w->event &&
+	if (!w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
 		ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
 		if (ret < 0)
@@ -652,6 +628,116 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	return 0;
 }
 
+/* Generic check to see if a widget should be powered.
+ */
+static int dapm_generic_check_power(struct snd_soc_dapm_widget *w)
+{
+	int in, out;
+
+	in = is_connected_input_ep(w);
+	dapm_clear_walk(w->codec);
+	out = is_connected_output_ep(w);
+	dapm_clear_walk(w->codec);
+	return out != 0 && in != 0;
+}
+
+/* Check to see if an ADC has power */
+static int dapm_adc_check_power(struct snd_soc_dapm_widget *w)
+{
+	int in;
+
+	if (w->active) {
+		in = is_connected_input_ep(w);
+		dapm_clear_walk(w->codec);
+		return in != 0;
+	} else {
+		return dapm_generic_check_power(w);
+	}
+}
+
+/* Check to see if a DAC has power */
+static int dapm_dac_check_power(struct snd_soc_dapm_widget *w)
+{
+	int out;
+
+	if (w->active) {
+		out = is_connected_output_ep(w);
+		dapm_clear_walk(w->codec);
+		return out != 0;
+	} else {
+		return dapm_generic_check_power(w);
+	}
+}
+
+/* Check to see if a power supply is needed */
+static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *path;
+	int power = 0;
+
+	/* Check if one of our outputs is connected */
+	list_for_each_entry(path, &w->sinks, list_source) {
+		if (path->sink && path->sink->power_check &&
+		    path->sink->power_check(path->sink)) {
+			power = 1;
+			break;
+		}
+	}
+
+	dapm_clear_walk(w->codec);
+
+	return power;
+}
+
+/*
+ * Scan a single DAPM widget for a complete audio path and update the
+ * power status appropriately.
+ */
+static int dapm_power_widget(struct snd_soc_codec *codec, int event,
+			     struct snd_soc_dapm_widget *w)
+{
+	int ret;
+
+	switch (w->id) {
+	case snd_soc_dapm_pre:
+		if (!w->event)
+			return 0;
+
+		if (event == SND_SOC_DAPM_STREAM_START) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_PRE_PMU);
+			if (ret < 0)
+				return ret;
+		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_PRE_PMD);
+			if (ret < 0)
+				return ret;
+		}
+		return 0;
+
+	case snd_soc_dapm_post:
+		if (!w->event)
+			return 0;
+
+		if (event == SND_SOC_DAPM_STREAM_START) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_POST_PMU);
+			if (ret < 0)
+				return ret;
+		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_POST_PMD);
+			if (ret < 0)
+				return ret;
+		}
+		return 0;
+
+	default:
+		return dapm_generic_apply_power(w);
+	}
+}
+
 /*
  * Scan each dapm widget for complete audio path.
  * A complete path is a route that has valid endpoints i.e.:-
@@ -663,31 +749,102 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
  */
 static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 {
+	struct snd_soc_device *socdev = codec->socdev;
 	struct snd_soc_dapm_widget *w;
-	int i, c = 1, *seq = NULL, ret = 0;
-
-	/* do we have a sequenced stream event */
-	if (event == SND_SOC_DAPM_STREAM_START) {
-		c = ARRAY_SIZE(dapm_up_seq);
-		seq = dapm_up_seq;
-	} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-		c = ARRAY_SIZE(dapm_down_seq);
-		seq = dapm_down_seq;
+	int ret = 0;
+	int i, power;
+	int sys_power = 0;
+
+	INIT_LIST_HEAD(&codec->up_list);
+	INIT_LIST_HEAD(&codec->down_list);
+
+	/* Check which widgets we need to power and store them in
+	 * lists indicating if they should be powered up or down.
+	 */
+	list_for_each_entry(w, &codec->dapm_widgets, list) {
+		switch (w->id) {
+		case snd_soc_dapm_pre:
+			list_add_tail(&codec->down_list, &w->power_list);
+			break;
+		case snd_soc_dapm_post:
+			list_add_tail(&codec->up_list, &w->power_list);
+			break;
+
+		default:
+			if (!w->power_check)
+				continue;
+
+			power = w->power_check(w);
+			if (power)
+				sys_power = 1;
+
+			if (w->power == power)
+				continue;
+
+			if (power)
+				list_add_tail(&w->power_list, &codec->up_list);
+			else
+				list_add_tail(&w->power_list,
+					      &codec->down_list);
+
+			w->power = power;
+			break;
+		}
 	}
 
-	for (i = 0; i < c; i++) {
-		list_for_each_entry(w, &codec->dapm_widgets, list) {
+	/* If we're changing to all on or all off then prepare */
+	if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
+	    (!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_PREPARE);
+		if (ret != 0)
+			pr_err("Failed to prepare bias: %d\n", ret);
+	}
 
+	/* Power down widgets first; try to avoid amplifying pops. */
+	for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) {
+		list_for_each_entry(w, &codec->down_list, power_list) {
 			/* is widget in stream order */
-			if (seq && seq[i] && w->id != seq[i])
+			if (w->id != dapm_down_seq[i])
 				continue;
 
 			ret = dapm_power_widget(codec, event, w);
 			if (ret != 0)
-				return ret;
+				pr_err("Failed to power down %s: %d\n",
+				       w->name, ret);
 		}
 	}
 
+	/* Now power up. */
+	for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) {
+		list_for_each_entry(w, &codec->up_list, power_list) {
+			/* is widget in stream order */
+			if (w->id != dapm_up_seq[i])
+				continue;
+
+			ret = dapm_power_widget(codec, event, w);
+			if (ret != 0)
+				pr_err("Failed to power up %s: %d\n",
+				       w->name, ret);
+		}
+	}
+
+	/* If we just powered the last thing off drop to standby bias */
+	if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_STANDBY);
+		if (ret != 0)
+			pr_err("Failed to apply standby bias: %d\n", ret);
+	}
+
+	/* If we just powered up then move to active bias */
+	if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_ON);
+		if (ret != 0)
+			pr_err("Failed to apply active bias: %d\n", ret);
+	}
+
 	return 0;
 }
 
@@ -723,6 +880,7 @@ static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action)
 		case snd_soc_dapm_pga:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+		case snd_soc_dapm_supply:
 			if (w->name) {
 				in = is_connected_input_ep(w);
 				dapm_clear_walk(w->codec);
@@ -851,6 +1009,7 @@ static ssize_t dapm_widget_show(struct device *dev,
 		case snd_soc_dapm_pga:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+		case snd_soc_dapm_supply:
 			if (w->name)
 				count += sprintf(buf + count, "%s: %s\n",
 					w->name, w->power ? "On":"Off");
@@ -883,16 +1042,12 @@ static DEVICE_ATTR(dapm_widget, 0444, dapm_widget_show, NULL);
 
 int snd_soc_dapm_sys_add(struct device *dev)
 {
-	if (!dapm_status)
-		return 0;
 	return device_create_file(dev, &dev_attr_dapm_widget);
 }
 
 static void snd_soc_dapm_sys_remove(struct device *dev)
 {
-	if (dapm_status) {
-		device_remove_file(dev, &dev_attr_dapm_widget);
-	}
+	device_remove_file(dev, &dev_attr_dapm_widget);
 }
 
 /* free all dapm widgets and resources */
@@ -1015,6 +1170,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_codec *codec,
 	case snd_soc_dapm_vmid:
 	case snd_soc_dapm_pre:
 	case snd_soc_dapm_post:
+	case snd_soc_dapm_supply:
 		list_add(&path->list, &codec->dapm_paths);
 		list_add(&path->list_sink, &wsink->sources);
 		list_add(&path->list_source, &wsource->sinks);
@@ -1108,15 +1264,22 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
 		case snd_soc_dapm_switch:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_mixer(codec, w);
 			break;
 		case snd_soc_dapm_mux:
 		case snd_soc_dapm_value_mux:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_mux(codec, w);
 			break;
 		case snd_soc_dapm_adc:
+			w->power_check = dapm_adc_check_power;
+			break;
 		case snd_soc_dapm_dac:
+			w->power_check = dapm_dac_check_power;
+			break;
 		case snd_soc_dapm_pga:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_pga(codec, w);
 			break;
 		case snd_soc_dapm_input:
@@ -1126,6 +1289,10 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
 		case snd_soc_dapm_hp:
 		case snd_soc_dapm_mic:
 		case snd_soc_dapm_line:
+			w->power_check = dapm_generic_check_power;
+			break;
+		case snd_soc_dapm_supply:
+			w->power_check = dapm_supply_check_power;
 		case snd_soc_dapm_vmid:
 		case snd_soc_dapm_pre:
 		case snd_soc_dapm_post:
@@ -1626,35 +1793,11 @@ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec,
 EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event);
 
 /**
- * snd_soc_dapm_set_bias_level - set the bias level for the system
- * @socdev: audio device
- * @level: level to configure
- *
- * Configure the bias (power) levels for the SoC audio device.
- *
- * Returns 0 for success else error.
- */
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
-				enum snd_soc_bias_level level)
-{
-	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret = 0;
-
-	if (card->set_bias_level)
-		ret = card->set_bias_level(card, level);
-	if (ret == 0 && codec->set_bias_level)
-		ret = codec->set_bias_level(codec, level);
-
-	return ret;
-}
-
-/**
  * snd_soc_dapm_enable_pin - enable pin.
  * @codec: SoC codec
  * @pin: pin name
  *
- * Enables input/output pin and it's parents or children widgets iff there is
+ * Enables input/output pin and its parents or children widgets iff there is
  * a valid audio route and active audio stream.
  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
  * do any widget power switching.
@@ -1670,7 +1813,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin);
  * @codec: SoC codec
  * @pin: pin name
  *
- * Disables input/output pin and it's parents or children widgets.
+ * Disables input/output pin and its parents or children widgets.
  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
  * do any widget power switching.
  */
diff --git a/sound/soc/txx9/Kconfig b/sound/soc/txx9/Kconfig
new file mode 100644
index 00000000000..ebc9327eae7
--- /dev/null
+++ b/sound/soc/txx9/Kconfig
@@ -0,0 +1,29 @@
+##
+## TXx9 ACLC
+##
+config SND_SOC_TXX9ACLC
+	tristate "SoC Audio for TXx9"
+	depends on HAS_TXX9_ACLC && TXX9_DMAC
+	help
+	  This option enables support for the AC Link Controllers in TXx9 SoC.
+
+config HAS_TXX9_ACLC
+	bool
+
+config SND_SOC_TXX9ACLC_AC97
+	tristate
+	select AC97_BUS
+	select SND_AC97_CODEC
+	select SND_SOC_AC97_BUS
+
+
+##
+## Boards
+##
+config SND_SOC_TXX9ACLC_GENERIC
+	tristate "Generic TXx9 ACLC sound machine"
+	depends on SND_SOC_TXX9ACLC
+	select SND_SOC_TXX9ACLC_AC97
+	select SND_SOC_AC97_CODEC
+	help
+	  This is a generic AC97 sound machine for use in TXx9 based systems.
diff --git a/sound/soc/txx9/Makefile b/sound/soc/txx9/Makefile
new file mode 100644
index 00000000000..551f16c0c4f
--- /dev/null
+++ b/sound/soc/txx9/Makefile
@@ -0,0 +1,11 @@
+# Platform
+snd-soc-txx9aclc-objs := txx9aclc.o
+snd-soc-txx9aclc-ac97-objs := txx9aclc-ac97.o
+
+obj-$(CONFIG_SND_SOC_TXX9ACLC) += snd-soc-txx9aclc.o
+obj-$(CONFIG_SND_SOC_TXX9ACLC_AC97) += snd-soc-txx9aclc-ac97.o
+
+# Machine
+snd-soc-txx9aclc-generic-objs := txx9aclc-generic.o
+
+obj-$(CONFIG_SND_SOC_TXX9ACLC_GENERIC) += snd-soc-txx9aclc-generic.o
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
new file mode 100644
index 00000000000..0f83bdb9b16
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -0,0 +1,255 @@
+/*
+ * TXx9 ACLC AC97 driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "txx9aclc.h"
+
+#define AC97_DIR	\
+	(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
+
+#define AC97_RATES	\
+	SNDRV_PCM_RATE_8000_48000
+
+#ifdef __BIG_ENDIAN
+#define AC97_FMTS	SNDRV_PCM_FMTBIT_S16_BE
+#else
+#define AC97_FMTS	SNDRV_PCM_FMTBIT_S16_LE
+#endif
+
+static DECLARE_WAIT_QUEUE_HEAD(ac97_waitq);
+
+/* REVISIT: How to find txx9aclc_soc_device from snd_ac97? */
+static struct txx9aclc_soc_device *txx9aclc_soc_dev;
+
+static int txx9aclc_regready(struct txx9aclc_soc_device *dev)
+{
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+
+	return __raw_readl(drvdata->base + ACINTSTS) & ACINT_REGACCRDY;
+}
+
+/* AC97 controller reads codec register */
+static unsigned short txx9aclc_ac97_read(struct snd_ac97 *ac97,
+					 unsigned short reg)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	u32 dat;
+
+	if (!(__raw_readl(base + ACINTSTS) & ACINT_CODECRDY(ac97->num)))
+		return 0xffff;
+	reg |= ac97->num << 7;
+	dat = (reg << ACREGACC_REG_SHIFT) | ACREGACC_READ;
+	__raw_writel(dat, base + ACREGACC);
+	__raw_writel(ACINT_REGACCRDY, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) {
+		__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+		dev_err(dev->soc_dev.dev, "ac97 read timeout (reg %#x)\n", reg);
+		dat = 0xffff;
+		goto done;
+	}
+	dat = __raw_readl(base + ACREGACC);
+	if (((dat >> ACREGACC_REG_SHIFT) & 0xff) != reg) {
+		dev_err(dev->soc_dev.dev, "reg mismatch %x with %x\n",
+			dat, reg);
+		dat = 0xffff;
+		goto done;
+	}
+	dat = (dat >> ACREGACC_DAT_SHIFT) & 0xffff;
+done:
+	__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+	return dat;
+}
+
+/* AC97 controller writes to codec register */
+static void txx9aclc_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+				unsigned short val)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+
+	__raw_writel(((reg | (ac97->num << 7)) << ACREGACC_REG_SHIFT) |
+		     (val << ACREGACC_DAT_SHIFT),
+		     base + ACREGACC);
+	__raw_writel(ACINT_REGACCRDY, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) {
+		dev_err(dev->soc_dev.dev,
+			"ac97 write timeout (reg %#x)\n", reg);
+	}
+	__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+}
+
+static void txx9aclc_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	u32 ready = ACINT_CODECRDY(ac97->num) | ACINT_REGACCRDY;
+
+	__raw_writel(ACCTL_ENLINK, base + ACCTLDIS);
+	mmiowb();
+	udelay(1);
+	__raw_writel(ACCTL_ENLINK, base + ACCTLEN);
+	/* wait for primary codec ready status */
+	__raw_writel(ready, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq,
+				(__raw_readl(base + ACINTSTS) & ready) == ready,
+				HZ)) {
+		dev_err(&ac97->dev, "primary codec is not ready "
+			"(status %#x)\n",
+			__raw_readl(base + ACINTSTS));
+	}
+	__raw_writel(ACINT_REGACCRDY, base + ACINTSTS);
+	__raw_writel(ready, base + ACINTDIS);
+}
+
+/* AC97 controller operations */
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= txx9aclc_ac97_read,
+	.write		= txx9aclc_ac97_write,
+	.reset		= txx9aclc_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static irqreturn_t txx9aclc_ac97_irq(int irq, void *dev_id)
+{
+	struct txx9aclc_plat_drvdata *drvdata = dev_id;
+	void __iomem *base = drvdata->base;
+
+	__raw_writel(__raw_readl(base + ACINTMSTS), base + ACINTDIS);
+	wake_up(&ac97_waitq);
+	return IRQ_HANDLED;
+}
+
+static int txx9aclc_ac97_probe(struct platform_device *pdev,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+
+	dev->aclc_pdev = to_platform_device(dai->dev);
+	txx9aclc_soc_dev = dev;
+	return 0;
+}
+
+static void txx9aclc_ac97_remove(struct platform_device *pdev,
+				 struct snd_soc_dai *dai)
+{
+	struct platform_device *aclc_pdev = to_platform_device(dai->dev);
+	struct txx9aclc_plat_drvdata *drvdata = platform_get_drvdata(aclc_pdev);
+
+	/* disable AC-link */
+	__raw_writel(ACCTL_ENLINK, drvdata->base + ACCTLDIS);
+	txx9aclc_soc_dev = NULL;
+}
+
+struct snd_soc_dai txx9aclc_ac97_dai = {
+	.name			= "txx9aclc_ac97",
+	.ac97_control		= 1,
+	.probe			= txx9aclc_ac97_probe,
+	.remove			= txx9aclc_ac97_remove,
+	.playback = {
+		.rates		= AC97_RATES,
+		.formats	= AC97_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 2,
+	},
+	.capture = {
+		.rates		= AC97_RATES,
+		.formats	= AC97_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 2,
+	},
+};
+EXPORT_SYMBOL_GPL(txx9aclc_ac97_dai);
+
+static int __devinit txx9aclc_ac97_dev_probe(struct platform_device *pdev)
+{
+	struct txx9aclc_plat_drvdata *drvdata;
+	struct resource *r;
+	int err;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -EBUSY;
+
+	if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
+				     dev_name(&pdev->dev)))
+		return -EBUSY;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, drvdata);
+	drvdata->physbase = r->start;
+	if (sizeof(drvdata->physbase) > sizeof(r->start) &&
+	    r->start >= TXX9_DIRECTMAP_BASE &&
+	    r->start < TXX9_DIRECTMAP_BASE + 0x400000)
+		drvdata->physbase |= 0xf00000000ull;
+	drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!drvdata->base)
+		return -EBUSY;
+	err = devm_request_irq(&pdev->dev, irq, txx9aclc_ac97_irq,
+			       IRQF_DISABLED, dev_name(&pdev->dev), drvdata);
+	if (err < 0)
+		return err;
+
+	txx9aclc_ac97_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&txx9aclc_ac97_dai);
+}
+
+static int __devexit txx9aclc_ac97_dev_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&txx9aclc_ac97_dai);
+	return 0;
+}
+
+static struct platform_driver txx9aclc_ac97_driver = {
+	.probe		= txx9aclc_ac97_dev_probe,
+	.remove		= __devexit_p(txx9aclc_ac97_dev_remove),
+	.driver		= {
+		.name	= "txx9aclc-ac97",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init txx9aclc_ac97_init(void)
+{
+	return platform_driver_register(&txx9aclc_ac97_driver);
+}
+
+static void __exit txx9aclc_ac97_exit(void)
+{
+	platform_driver_unregister(&txx9aclc_ac97_driver);
+}
+
+module_init(txx9aclc_ac97_init);
+module_exit(txx9aclc_ac97_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TXx9 ACLC AC97 driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c
new file mode 100644
index 00000000000..3175de9a92c
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc-generic.c
@@ -0,0 +1,98 @@
+/*
+ * Generic TXx9 ACLC machine driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is a very generic AC97 sound machine driver for boards which
+ * have (AC97) audio at ACLC (e.g. RBTX49XX boards).
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "../codecs/ac97.h"
+#include "txx9aclc.h"
+
+static struct snd_soc_dai_link txx9aclc_generic_dai = {
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai = &txx9aclc_ac97_dai,
+	.codec_dai = &ac97_dai,
+};
+
+static struct snd_soc_card txx9aclc_generic_card = {
+	.name		= "Generic TXx9 ACLC Audio",
+	.platform	= &txx9aclc_soc_platform,
+	.dai_link	= &txx9aclc_generic_dai,
+	.num_links	= 1,
+};
+
+static struct txx9aclc_soc_device txx9aclc_generic_soc_device = {
+	.soc_dev = {
+		.card		= &txx9aclc_generic_card,
+		.codec_dev	= &soc_codec_dev_ac97,
+	},
+};
+
+static int __init txx9aclc_generic_probe(struct platform_device *pdev)
+{
+	struct txx9aclc_soc_device *dev = &txx9aclc_generic_soc_device;
+	struct platform_device *soc_pdev;
+	int ret;
+
+	soc_pdev = platform_device_alloc("soc-audio", -1);
+	if (!soc_pdev)
+		return -ENOMEM;
+	platform_set_drvdata(soc_pdev, &dev->soc_dev);
+	dev->soc_dev.dev = &soc_pdev->dev;
+	ret = platform_device_add(soc_pdev);
+	if (ret) {
+		platform_device_put(soc_pdev);
+		return ret;
+	}
+	platform_set_drvdata(pdev, soc_pdev);
+	return 0;
+}
+
+static int __exit txx9aclc_generic_remove(struct platform_device *pdev)
+{
+	struct platform_device *soc_pdev = platform_get_drvdata(pdev);
+
+	platform_device_unregister(soc_pdev);
+	return 0;
+}
+
+static struct platform_driver txx9aclc_generic_driver = {
+	.remove = txx9aclc_generic_remove,
+	.driver = {
+		.name = "txx9aclc-generic",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init txx9aclc_generic_init(void)
+{
+	return platform_driver_probe(&txx9aclc_generic_driver,
+				     txx9aclc_generic_probe);
+}
+
+static void __exit txx9aclc_generic_exit(void)
+{
+	platform_driver_unregister(&txx9aclc_generic_driver);
+}
+
+module_init(txx9aclc_generic_init);
+module_exit(txx9aclc_generic_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
new file mode 100644
index 00000000000..fa336616152
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc.c
@@ -0,0 +1,430 @@
+/*
+ * Generic TXx9 ACLC platform driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include "txx9aclc.h"
+
+static const struct snd_pcm_hardware txx9aclc_pcm_hardware = {
+	/*
+	 * REVISIT: SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID
+	 * needs more works for noncoherent MIPS.
+	 */
+	.info		  = SNDRV_PCM_INFO_INTERLEAVED |
+			    SNDRV_PCM_INFO_BATCH |
+			    SNDRV_PCM_INFO_PAUSE,
+#ifdef __BIG_ENDIAN
+	.formats	  = SNDRV_PCM_FMTBIT_S16_BE,
+#else
+	.formats	  = SNDRV_PCM_FMTBIT_S16_LE,
+#endif
+	.period_bytes_min = 1024,
+	.period_bytes_max = 8 * 1024,
+	.periods_min	  = 2,
+	.periods_max	  = 4096,
+	.buffer_bytes_max = 32 * 1024,
+};
+
+static int txx9aclc_pcm_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct txx9aclc_dmadata *dmadata = runtime->private_data;
+	int ret;
+
+	ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(socdev->dev,
+		"runtime->dma_area = %#lx dma_addr = %#lx dma_bytes = %zd "
+		"runtime->min_align %ld\n",
+		(unsigned long)runtime->dma_area,
+		(unsigned long)runtime->dma_addr, runtime->dma_bytes,
+		runtime->min_align);
+	dev_dbg(socdev->dev,
+		"periods %d period_bytes %d stream %d\n",
+		params_periods(params), params_period_bytes(params),
+		substream->stream);
+
+	dmadata->substream = substream;
+	dmadata->pos = 0;
+	return 0;
+}
+
+static int txx9aclc_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int txx9aclc_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct txx9aclc_dmadata *dmadata = runtime->private_data;
+
+	dmadata->dma_addr = runtime->dma_addr;
+	dmadata->buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
+	dmadata->period_bytes = snd_pcm_lib_period_bytes(substream);
+
+	if (dmadata->buffer_bytes == dmadata->period_bytes) {
+		dmadata->frag_bytes = dmadata->period_bytes >> 1;
+		dmadata->frags = 2;
+	} else {
+		dmadata->frag_bytes = dmadata->period_bytes;
+		dmadata->frags = dmadata->buffer_bytes / dmadata->period_bytes;
+	}
+	dmadata->frag_count = 0;
+	dmadata->pos = 0;
+	return 0;
+}
+
+static void txx9aclc_dma_complete(void *arg)
+{
+	struct txx9aclc_dmadata *dmadata = arg;
+	unsigned long flags;
+
+	/* dma completion handler cannot submit new operations */
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	if (dmadata->frag_count >= 0) {
+		dmadata->dmacount--;
+		BUG_ON(dmadata->dmacount < 0);
+		tasklet_schedule(&dmadata->tasklet);
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+}
+
+static struct dma_async_tx_descriptor *
+txx9aclc_dma_submit(struct txx9aclc_dmadata *dmadata, dma_addr_t buf_dma_addr)
+{
+	struct dma_chan *chan = dmadata->dma_chan;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist sg;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf_dma_addr)),
+		    dmadata->frag_bytes, buf_dma_addr & (PAGE_SIZE - 1));
+	sg_dma_address(&sg) = buf_dma_addr;
+	desc = chan->device->device_prep_slave_sg(chan, &sg, 1,
+		dmadata->substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		DMA_TO_DEVICE : DMA_FROM_DEVICE,
+		DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+		return NULL;
+	}
+	desc->callback = txx9aclc_dma_complete;
+	desc->callback_param = dmadata;
+	desc->tx_submit(desc);
+	return desc;
+}
+
+#define NR_DMA_CHAIN		2
+
+static void txx9aclc_dma_tasklet(unsigned long data)
+{
+	struct txx9aclc_dmadata *dmadata = (struct txx9aclc_dmadata *)data;
+	struct dma_chan *chan = dmadata->dma_chan;
+	struct dma_async_tx_descriptor *desc;
+	struct snd_pcm_substream *substream = dmadata->substream;
+	u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		ACCTL_AUDODMA : ACCTL_AUDIDMA;
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	if (dmadata->frag_count < 0) {
+		struct txx9aclc_soc_device *dev =
+			container_of(dmadata, struct txx9aclc_soc_device,
+				     dmadata[substream->stream]);
+		struct txx9aclc_plat_drvdata *drvdata =
+			txx9aclc_get_plat_drvdata(dev);
+		void __iomem *base = drvdata->base;
+
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		chan->device->device_terminate_all(chan);
+		/* first time */
+		for (i = 0; i < NR_DMA_CHAIN; i++) {
+			desc = txx9aclc_dma_submit(dmadata,
+				dmadata->dma_addr + i * dmadata->frag_bytes);
+			if (!desc)
+				return;
+		}
+		dmadata->dmacount = NR_DMA_CHAIN;
+		chan->device->device_issue_pending(chan);
+		spin_lock_irqsave(&dmadata->dma_lock, flags);
+		__raw_writel(ctlbit, base + ACCTLEN);
+		dmadata->frag_count = NR_DMA_CHAIN % dmadata->frags;
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		return;
+	}
+	BUG_ON(dmadata->dmacount >= NR_DMA_CHAIN);
+	while (dmadata->dmacount < NR_DMA_CHAIN) {
+		dmadata->dmacount++;
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		desc = txx9aclc_dma_submit(dmadata,
+			dmadata->dma_addr +
+			dmadata->frag_count * dmadata->frag_bytes);
+		if (!desc)
+			return;
+		chan->device->device_issue_pending(chan);
+
+		spin_lock_irqsave(&dmadata->dma_lock, flags);
+		dmadata->frag_count++;
+		dmadata->frag_count %= dmadata->frags;
+		dmadata->pos += dmadata->frag_bytes;
+		dmadata->pos %= dmadata->buffer_bytes;
+		if ((dmadata->frag_count * dmadata->frag_bytes) %
+		    dmadata->period_bytes == 0)
+			snd_pcm_period_elapsed(substream);
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+}
+
+static int txx9aclc_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct txx9aclc_soc_device *dev =
+		container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		ACCTL_AUDODMA : ACCTL_AUDIDMA;
+
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		dmadata->frag_count = -1;
+		tasklet_schedule(&dmadata->tasklet);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		__raw_writel(ctlbit, base + ACCTLDIS);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		__raw_writel(ctlbit, base + ACCTLEN);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+	return ret;
+}
+
+static snd_pcm_uframes_t
+txx9aclc_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+
+	return bytes_to_frames(substream->runtime, dmadata->pos);
+}
+
+static int txx9aclc_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct txx9aclc_soc_device *dev =
+		container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_dmadata *dmadata = &dev->dmadata[substream->stream];
+	int ret;
+
+	ret = snd_soc_set_runtime_hwparams(substream, &txx9aclc_pcm_hardware);
+	if (ret)
+		return ret;
+	/* ensure that buffer size is a multiple of period size */
+	ret = snd_pcm_hw_constraint_integer(substream->runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+	substream->runtime->private_data = dmadata;
+	return 0;
+}
+
+static int txx9aclc_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+	struct dma_chan *chan = dmadata->dma_chan;
+
+	dmadata->frag_count = -1;
+	chan->device->device_terminate_all(chan);
+	return 0;
+}
+
+static struct snd_pcm_ops txx9aclc_pcm_ops = {
+	.open		= txx9aclc_pcm_open,
+	.close		= txx9aclc_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= txx9aclc_pcm_hw_params,
+	.hw_free	= txx9aclc_pcm_hw_free,
+	.prepare	= txx9aclc_pcm_prepare,
+	.trigger	= txx9aclc_pcm_trigger,
+	.pointer	= txx9aclc_pcm_pointer,
+};
+
+static void txx9aclc_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int txx9aclc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+			    struct snd_pcm *pcm)
+{
+	return snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+		card->dev, 64 * 1024, 4 * 1024 * 1024);
+}
+
+static bool filter(struct dma_chan *chan, void *param)
+{
+	struct txx9aclc_dmadata *dmadata = param;
+	char devname[BUS_ID_SIZE + 2];
+
+	sprintf(devname, "%s.%d", dmadata->dma_res->name,
+		(int)dmadata->dma_res->start);
+	if (strcmp(dev_name(chan->device->dev), devname) == 0) {
+		chan->private = &dmadata->dma_slave;
+		return true;
+	}
+	return false;
+}
+
+static int txx9aclc_dma_init(struct txx9aclc_soc_device *dev,
+			     struct txx9aclc_dmadata *dmadata)
+{
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	struct txx9dmac_slave *ds = &dmadata->dma_slave;
+	dma_cap_mask_t mask;
+
+	spin_lock_init(&dmadata->dma_lock);
+
+	ds->reg_width = sizeof(u32);
+	if (dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ds->tx_reg = drvdata->physbase + ACAUDODAT;
+		ds->rx_reg = 0;
+	} else {
+		ds->tx_reg = 0;
+		ds->rx_reg = drvdata->physbase + ACAUDIDAT;
+	}
+
+	/* Try to grab a DMA channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dmadata->dma_chan = dma_request_channel(mask, filter, dmadata);
+	if (!dmadata->dma_chan) {
+		dev_err(dev->soc_dev.dev,
+			"DMA channel for %s is not available\n",
+			dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+			"playback" : "capture");
+		return -EBUSY;
+	}
+	tasklet_init(&dmadata->tasklet, txx9aclc_dma_tasklet,
+		     (unsigned long)dmadata);
+	return 0;
+}
+
+static int txx9aclc_pcm_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+	struct resource *r;
+	int i;
+	int ret;
+
+	dev->dmadata[0].stream = SNDRV_PCM_STREAM_PLAYBACK;
+	dev->dmadata[1].stream = SNDRV_PCM_STREAM_CAPTURE;
+	for (i = 0; i < 2; i++) {
+		r = platform_get_resource(dev->aclc_pdev, IORESOURCE_DMA, i);
+		if (!r) {
+			ret = -EBUSY;
+			goto exit;
+		}
+		dev->dmadata[i].dma_res = r;
+		ret = txx9aclc_dma_init(dev, &dev->dmadata[i]);
+		if (ret)
+			goto exit;
+	}
+	return 0;
+
+exit:
+	for (i = 0; i < 2; i++) {
+		if (dev->dmadata[i].dma_chan)
+			dma_release_channel(dev->dmadata[i].dma_chan);
+		dev->dmadata[i].dma_chan = NULL;
+	}
+	return ret;
+}
+
+static int txx9aclc_pcm_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	int i;
+
+	/* disable all FIFO DMAs */
+	__raw_writel(ACCTL_AUDODMA | ACCTL_AUDIDMA, base + ACCTLDIS);
+	/* dummy R/W to clear pending DMAREQ if any */
+	__raw_writel(__raw_readl(base + ACAUDIDAT), base + ACAUDODAT);
+
+	for (i = 0; i < 2; i++) {
+		struct txx9aclc_dmadata *dmadata = &dev->dmadata[i];
+		struct dma_chan *chan = dmadata->dma_chan;
+		if (chan) {
+			dmadata->frag_count = -1;
+			chan->device->device_terminate_all(chan);
+			dma_release_channel(chan);
+		}
+		dev->dmadata[i].dma_chan = NULL;
+	}
+	return 0;
+}
+
+struct snd_soc_platform txx9aclc_soc_platform = {
+	.name		= "txx9aclc-audio",
+	.probe		= txx9aclc_pcm_probe,
+	.remove		= txx9aclc_pcm_remove,
+	.pcm_ops 	= &txx9aclc_pcm_ops,
+	.pcm_new	= txx9aclc_pcm_new,
+	.pcm_free	= txx9aclc_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(txx9aclc_soc_platform);
+
+static int __init txx9aclc_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&txx9aclc_soc_platform);
+}
+
+static void __exit txx9aclc_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&txx9aclc_soc_platform);
+}
+
+module_init(txx9aclc_soc_platform_init);
+module_exit(txx9aclc_soc_platform_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TXx9 ACLC Audio DMA driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc.h b/sound/soc/txx9/txx9aclc.h
new file mode 100644
index 00000000000..6769aab41b3
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc.h
@@ -0,0 +1,83 @@
+/*
+ * TXx9 SoC AC Link Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TXX9ACLC_H
+#define __TXX9ACLC_H
+
+#include <linux/interrupt.h>
+#include <asm/txx9/dmac.h>
+
+#define ACCTLEN			0x00	/* control enable */
+#define ACCTLDIS		0x04	/* control disable */
+#define   ACCTL_ENLINK		0x00000001	/* enable/disable AC-link */
+#define   ACCTL_AUDODMA		0x00000100	/* AUDODMA enable/disable */
+#define   ACCTL_AUDIDMA		0x00001000	/* AUDIDMA enable/disable */
+#define   ACCTL_AUDOEHLT	0x00010000	/* AUDO error halt
+						   enable/disable */
+#define   ACCTL_AUDIEHLT	0x00100000	/* AUDI error halt
+						   enable/disable */
+#define ACREGACC		0x08	/* codec register access */
+#define   ACREGACC_DAT_SHIFT	0	/* data field */
+#define   ACREGACC_REG_SHIFT	16	/* address field */
+#define   ACREGACC_CODECID_SHIFT	24	/* CODEC ID field */
+#define   ACREGACC_READ		0x80000000	/* CODEC read */
+#define   ACREGACC_WRITE	0x00000000	/* CODEC write */
+#define ACINTSTS		0x10	/* interrupt status */
+#define ACINTMSTS		0x14	/* interrupt masked status */
+#define ACINTEN			0x18	/* interrupt enable */
+#define ACINTDIS		0x1c	/* interrupt disable */
+#define   ACINT_CODECRDY(n)	(0x00000001 << (n))	/* CODECn ready */
+#define   ACINT_REGACCRDY	0x00000010	/* ACREGACC ready */
+#define   ACINT_AUDOERR		0x00000100	/* AUDO underrun error */
+#define   ACINT_AUDIERR		0x00001000	/* AUDI overrun error */
+#define ACDMASTS		0x80	/* DMA request status */
+#define   ACDMA_AUDO		0x00000001	/* AUDODMA pending */
+#define   ACDMA_AUDI		0x00000010	/* AUDIDMA pending */
+#define ACAUDODAT		0xa0	/* audio out data */
+#define ACAUDIDAT		0xb0	/* audio in data */
+#define ACREVID			0xfc	/* revision ID */
+
+struct txx9aclc_dmadata {
+	struct resource *dma_res;
+	struct txx9dmac_slave dma_slave;
+	struct dma_chan *dma_chan;
+	struct tasklet_struct tasklet;
+	spinlock_t dma_lock;
+	int stream; /* SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE */
+	struct snd_pcm_substream *substream;
+	unsigned long pos;
+	dma_addr_t dma_addr;
+	unsigned long buffer_bytes;
+	unsigned long period_bytes;
+	unsigned long frag_bytes;
+	int frags;
+	int frag_count;
+	int dmacount;
+};
+
+struct txx9aclc_plat_drvdata {
+	void __iomem *base;
+	u64 physbase;
+};
+
+struct txx9aclc_soc_device {
+	struct snd_soc_device soc_dev;
+	struct platform_device *aclc_pdev;	/* for ioresources, drvdata */
+	struct txx9aclc_dmadata dmadata[2];
+};
+
+static inline struct txx9aclc_plat_drvdata *txx9aclc_get_plat_drvdata(
+	struct txx9aclc_soc_device *sdev)
+{
+	return platform_get_drvdata(sdev->aclc_pdev);
+}
+
+extern struct snd_soc_platform txx9aclc_soc_platform;
+extern struct snd_soc_dai txx9aclc_ac97_dai;
+
+#endif /* __TXX9ACLC_H */
diff --git a/sound/synth/Makefile b/sound/synth/Makefile
index e99fd76caa1..11eb06ac2ec 100644
--- a/sound/synth/Makefile
+++ b/sound/synth/Makefile
@@ -5,16 +5,8 @@
 
 snd-util-mem-objs := util_mem.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_EMU10K1) += snd-util-mem.o
 obj-$(CONFIG_SND_TRIDENT) += snd-util-mem.o
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-util-mem.o
-obj-$(call sequencer,$(CONFIG_SND)) += emux/
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-util-mem.o
+obj-$(CONFIG_SND_SEQUENCER) += emux/
diff --git a/sound/synth/emux/Makefile b/sound/synth/emux/Makefile
index b69035240cf..328594e6152 100644
--- a/sound/synth/emux/Makefile
+++ b/sound/synth/emux/Makefile
@@ -7,14 +7,6 @@ snd-emux-synth-objs := emux.o emux_synth.o emux_seq.o emux_nrpn.o \
 		       emux_effect.o emux_proc.o emux_hwdep.o soundfont.o \
 		       $(if $(CONFIG_SND_SEQUENCER_OSS),emux_oss.o)
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependencies
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emux-synth.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emux-synth.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emux-synth.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emux-synth.o
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index b13ce767ac7..b1445134216 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -42,10 +42,10 @@
 	(stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
 
 static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
-	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | 
+	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 			   SNDRV_PCM_INFO_BLOCK_TRANSFER),
 	.formats 	= SNDRV_PCM_FMTBIT_S24_3BE,
-	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | 
+	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
 			   SNDRV_PCM_RATE_96000),
 	.rate_min	= 44100,
 	.rate_max	= 0, /* will overwrite later */
@@ -68,7 +68,7 @@ activate_substream(struct snd_usb_caiaqdev *dev,
 		dev->sub_capture[sub->number] = sub;
 }
 
-static void 
+static void
 deactivate_substream(struct snd_usb_caiaqdev *dev,
 		     struct snd_pcm_substream *sub)
 {
@@ -118,7 +118,7 @@ static int stream_start(struct snd_usb_caiaqdev *dev)
 			return -EPIPE;
 		}
 	}
-	
+
 	return 0;
 }
 
@@ -129,7 +129,7 @@ static void stream_stop(struct snd_usb_caiaqdev *dev)
 	debug("%s(%p)\n", __func__, dev);
 	if (!dev->streaming)
 		return;
-	
+
 	dev->streaming = 0;
 
 	for (i = 0; i < N_URBS; i++) {
@@ -154,7 +154,7 @@ static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream)
 	debug("%s(%p)\n", __func__, substream);
 	if (all_substreams_zero(dev->sub_playback) &&
 	    all_substreams_zero(dev->sub_capture)) {
-		/* when the last client has stopped streaming, 
+		/* when the last client has stopped streaming,
 		 * all sample rates are allowed again */
 		stream_stop(dev);
 		dev->pcm_info.rates = dev->samplerates;
@@ -194,7 +194,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	debug("%s(%p)\n", __func__, substream);
-	
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
 		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
@@ -205,19 +205,19 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 
 	if (dev->streaming)
 		return 0;
-	
+
 	/* the first client that opens a stream defines the sample rate
 	 * setting for all subsequent calls, until the last client closed. */
 	for (i=0; i < ARRAY_SIZE(rates); i++)
 		if (runtime->rate == rates[i])
 			dev->pcm_info.rates = 1 << i;
-	
+
 	snd_pcm_limit_hw_rates(runtime);
 
 	bytes_per_sample = BYTES_PER_SAMPLE;
 	if (dev->spec.data_alignment == 2)
 		bytes_per_sample++;
-	
+
 	bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
 		* bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
 
@@ -232,7 +232,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 	ret = stream_start(dev);
 	if (ret)
 		return ret;
-	
+
 	dev->output_running = 0;
 	wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
 	if (!dev->output_running) {
@@ -273,7 +273,7 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
 		return SNDRV_PCM_POS_XRUN;
 
 	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		return bytes_to_frames(sub->runtime, 
+		return bytes_to_frames(sub->runtime,
 					dev->audio_out_buf_pos[index]);
 	else
 		return bytes_to_frames(sub->runtime,
@@ -291,7 +291,7 @@ static struct snd_pcm_ops snd_usb_caiaq_ops = {
 	.trigger =	snd_usb_caiaq_pcm_trigger,
 	.pointer =	snd_usb_caiaq_pcm_pointer
 };
-	
+
 static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
 				      struct snd_pcm_substream **subs)
 {
@@ -333,7 +333,7 @@ static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev,
 				struct snd_pcm_runtime *rt = sub->runtime;
 				char *audio_buf = rt->dma_area;
 				int sz = frames_to_bytes(rt, rt->buffer_size);
-				audio_buf[dev->audio_in_buf_pos[stream]++] 
+				audio_buf[dev->audio_in_buf_pos[stream]++]
 					= usb_buf[i];
 				dev->period_in_count[stream]++;
 				if (dev->audio_in_buf_pos[stream] == sz)
@@ -354,14 +354,14 @@ static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
 
 	for (i = 0; i < iso->actual_length;) {
 		if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
-			for (stream = 0; 
-			     stream < dev->n_streams; 
+			for (stream = 0;
+			     stream < dev->n_streams;
 			     stream++, i++) {
 				if (dev->first_packet)
 					continue;
 
 				check_byte = MAKE_CHECKBYTE(dev, stream, i);
-				
+
 				if ((usb_buf[i] & 0x3f) != check_byte)
 					dev->input_panic = 1;
 
@@ -410,21 +410,21 @@ static void read_in_urb(struct snd_usb_caiaqdev *dev,
 	}
 
 	if ((dev->input_panic || dev->output_panic) && !dev->warned) {
-		debug("streaming error detected %s %s\n", 
+		debug("streaming error detected %s %s\n",
 				dev->input_panic ? "(input)" : "",
 				dev->output_panic ? "(output)" : "");
 		dev->warned = 1;
 	}
 }
 
-static void fill_out_urb(struct snd_usb_caiaqdev *dev, 
-			 struct urb *urb, 
+static void fill_out_urb(struct snd_usb_caiaqdev *dev,
+			 struct urb *urb,
 			 const struct usb_iso_packet_descriptor *iso)
 {
 	unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
 	struct snd_pcm_substream *sub;
 	int stream, i;
-	
+
 	for (i = 0; i < iso->length;) {
 		for (stream = 0; stream < dev->n_streams; stream++, i++) {
 			sub = dev->sub_playback[stream];
@@ -444,7 +444,7 @@ static void fill_out_urb(struct snd_usb_caiaqdev *dev,
 
 		/* fill in the check bytes */
 		if (dev->spec.data_alignment == 2 &&
-		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 
+		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) ==
 		    	(dev->n_streams * CHANNELS_PER_STREAM))
 		    for (stream = 0; stream < dev->n_streams; stream++, i++)
 		    	usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
@@ -453,7 +453,7 @@ static void fill_out_urb(struct snd_usb_caiaqdev *dev,
 
 static void read_completed(struct urb *urb)
 {
-	struct snd_usb_caiaq_cb_info *info = urb->context; 
+	struct snd_usb_caiaq_cb_info *info = urb->context;
 	struct snd_usb_caiaqdev *dev;
 	struct urb *out;
 	int frame, len, send_it = 0, outframe = 0;
@@ -478,7 +478,7 @@ static void read_completed(struct urb *urb)
 		out->iso_frame_desc[outframe].length = len;
 		out->iso_frame_desc[outframe].actual_length = 0;
 		out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
-		
+
 		if (len > 0) {
 			spin_lock(&dev->spinlock);
 			fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
@@ -497,14 +497,14 @@ static void read_completed(struct urb *urb)
 		out->transfer_flags = URB_ISO_ASAP;
 		usb_submit_urb(out, GFP_ATOMIC);
 	}
-	
+
 	/* re-submit inbound urb */
 	for (frame = 0; frame < FRAMES_PER_URB; frame++) {
 		urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
 		urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
 		urb->iso_frame_desc[frame].actual_length = 0;
 	}
-	
+
 	urb->number_of_packets = FRAMES_PER_URB;
 	urb->transfer_flags = URB_ISO_ASAP;
 	usb_submit_urb(urb, GFP_ATOMIC);
@@ -528,7 +528,7 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
 	struct usb_device *usb_dev = dev->chip.dev;
 	unsigned int pipe;
 
-	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? 
+	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ?
 		usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
 		usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
 
@@ -547,25 +547,25 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
 			return urbs;
 		}
 
-		urbs[i]->transfer_buffer = 
+		urbs[i]->transfer_buffer =
 			kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
 		if (!urbs[i]->transfer_buffer) {
 			log("unable to kmalloc() transfer buffer, OOM!?\n");
 			*ret = -ENOMEM;
 			return urbs;
 		}
-		
+
 		for (frame = 0; frame < FRAMES_PER_URB; frame++) {
-			struct usb_iso_packet_descriptor *iso = 
+			struct usb_iso_packet_descriptor *iso =
 				&urbs[i]->iso_frame_desc[frame];
-			
+
 			iso->offset = BYTES_PER_FRAME * frame;
 			iso->length = BYTES_PER_FRAME;
 		}
-		
+
 		urbs[i]->dev = usb_dev;
 		urbs[i]->pipe = pipe;
-		urbs[i]->transfer_buffer_length = FRAMES_PER_URB 
+		urbs[i]->transfer_buffer_length = FRAMES_PER_URB
 						* BYTES_PER_FRAME;
 		urbs[i]->context = &dev->data_cb_info[i];
 		urbs[i]->interval = 1;
@@ -589,7 +589,7 @@ static void free_urbs(struct urb **urbs)
 	for (i = 0; i < N_URBS; i++) {
 		if (!urbs[i])
 			continue;
-		
+
 		usb_kill_urb(urbs[i]);
 		kfree(urbs[i]->transfer_buffer);
 		usb_free_urb(urbs[i]);
@@ -602,11 +602,11 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 {
 	int i, ret;
 
-	dev->n_audio_in  = max(dev->spec.num_analog_audio_in, 
-			       dev->spec.num_digital_audio_in) / 
+	dev->n_audio_in  = max(dev->spec.num_analog_audio_in,
+			       dev->spec.num_digital_audio_in) /
 				CHANNELS_PER_STREAM;
 	dev->n_audio_out = max(dev->spec.num_analog_audio_out,
-			       dev->spec.num_digital_audio_out) / 
+			       dev->spec.num_digital_audio_out) /
 				CHANNELS_PER_STREAM;
 	dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
 
@@ -619,7 +619,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 		return -EINVAL;
 	}
 
-	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, 
+	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0,
 			dev->n_audio_out, dev->n_audio_in, &dev->pcm);
 
 	if (ret < 0) {
@@ -632,7 +632,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 
 	memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
 	memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
-	
+
 	memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
 			sizeof(snd_usb_caiaq_pcm_hardware));
 
@@ -651,9 +651,9 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 		break;
 	}
 
-	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, 
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK,
 				&snd_usb_caiaq_ops);
-	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, 
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE,
 				&snd_usb_caiaq_ops);
 
 	snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
@@ -662,7 +662,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 					MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
 
 	dev->data_cb_info =
-		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, 
+		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS,
 					GFP_KERNEL);
 
 	if (!dev->data_cb_info)
@@ -672,14 +672,14 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 		dev->data_cb_info[i].dev = dev;
 		dev->data_cb_info[i].index = i;
 	}
-	
+
 	dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
 	if (ret < 0) {
 		kfree(dev->data_cb_info);
 		free_urbs(dev->data_urbs_in);
 		return ret;
 	}
-	
+
 	dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
 	if (ret < 0) {
 		kfree(dev->data_cb_info);
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 515de1cd2a3..22406245a98 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.16");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
@@ -79,7 +79,7 @@ static struct usb_device_id snd_usb_id_table[] = {
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
 		.idVendor =	USB_VID_NATIVEINSTRUMENTS,
-		.idProduct =	USB_PID_RIGKONTROL2 
+		.idProduct =	USB_PID_RIGKONTROL2
 	},
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
@@ -197,7 +197,7 @@ int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
 
 	if (buffer && len > 0)
 		memcpy(dev->ep1_out_buf+1, buffer, len);
-	
+
 	dev->ep1_out_buf[0] = command;
 	return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
 			   dev->ep1_out_buf, len+1, &actual_len, 200);
@@ -208,7 +208,7 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
 {
 	int ret;
 	char tmp[5];
-	
+
 	switch (rate) {
 	case 44100:	tmp[0] = SAMPLERATE_44100;   break;
 	case 48000:	tmp[0] = SAMPLERATE_48000;   break;
@@ -237,12 +237,12 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
 
 	if (ret)
 		return ret;
-	
-	if (!wait_event_timeout(dev->ep1_wait_queue, 
+
+	if (!wait_event_timeout(dev->ep1_wait_queue,
 	    dev->audio_parm_answer >= 0, HZ))
 		return -EPIPE;
-		
-	if (dev->audio_parm_answer != 1) 
+
+	if (dev->audio_parm_answer != 1)
 		debug("unable to set the device's audio params\n");
 	else
 		dev->bpp = bpp;
@@ -250,8 +250,8 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
 	return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
 }
 
-int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, 
-				int digital, int analog, int erp)
+int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *dev,
+			       int digital, int analog, int erp)
 {
 	char tmp[3] = { digital, analog, erp };
 	return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
@@ -262,7 +262,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 {
 	int ret;
 	char val[4];
-	
+
 	/* device-specific startup specials */
 	switch (dev->chip.usb_id) {
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
@@ -314,7 +314,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 			dev->control_state, 1);
 		break;
 	}
-	
+
 	if (dev->spec.num_analog_audio_out +
 	    dev->spec.num_analog_audio_in +
 	    dev->spec.num_digital_audio_out +
@@ -323,7 +323,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 		if (ret < 0)
 			log("Unable to set up audio system (ret=%d)\n", ret);
 	}
-	
+
 	if (dev->spec.num_midi_in +
 	    dev->spec.num_midi_out > 0) {
 		ret = snd_usb_caiaq_midi_init(dev);
@@ -363,7 +363,7 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
 	if (devnum >= SNDRV_CARDS)
 		return -ENODEV;
 
-	err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, 
+	err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
 			      sizeof(struct snd_usb_caiaqdev), &card);
 	if (err < 0)
 		return err;
@@ -382,11 +382,11 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
 
 static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 {
-	char *c;
+	char *c, usbpath[32];
 	struct usb_device *usb_dev = dev->chip.dev;
 	struct snd_card *card = dev->chip.card;
 	int err, len;
-	
+
 	if (usb_set_interface(usb_dev, 0, 1) != 0) {
 		log("can't set alt interface.\n");
 		return -EIO;
@@ -395,19 +395,19 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 	usb_init_urb(&dev->ep1_in_urb);
 	usb_init_urb(&dev->midi_out_urb);
 
-	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, 
+	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
 			  usb_rcvbulkpipe(usb_dev, 0x1),
-			  dev->ep1_in_buf, EP1_BUFSIZE, 
+			  dev->ep1_in_buf, EP1_BUFSIZE,
 			  usb_ep1_command_reply_dispatch, dev);
 
-	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, 
+	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
 			  usb_sndbulkpipe(usb_dev, 0x1),
-			  dev->midi_out_buf, EP1_BUFSIZE, 
+			  dev->midi_out_buf, EP1_BUFSIZE,
 			  snd_usb_caiaq_midi_output_done, dev);
-	
+
 	init_waitqueue_head(&dev->ep1_wait_queue);
 	init_waitqueue_head(&dev->prepare_wait_queue);
-	
+
 	if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
 		return -EIO;
 
@@ -420,47 +420,52 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 
 	usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
 		   dev->vendor_name, CAIAQ_USB_STR_LEN);
-	
+
 	usb_string(usb_dev, usb_dev->descriptor.iProduct,
 		   dev->product_name, CAIAQ_USB_STR_LEN);
-	
-	usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
-		   dev->serial, CAIAQ_USB_STR_LEN);
-
-	/* terminate serial string at first white space occurence */
-	c = strchr(dev->serial, ' ');
-	if (c)
-		*c = '\0';
-	
-	strcpy(card->driver, MODNAME);
-	strcpy(card->shortname, dev->product_name);
-
-	len = snprintf(card->longname, sizeof(card->longname),
-		       "%s %s (serial %s, ",
-		       dev->vendor_name, dev->product_name, dev->serial);
-
-	if (len < sizeof(card->longname) - 2)
-		len += usb_make_path(usb_dev, card->longname + len,
-				     sizeof(card->longname) - len);
-
-	card->longname[len++] = ')';
-	card->longname[len] = '\0';
+
+	strlcpy(card->driver, MODNAME, sizeof(card->driver));
+	strlcpy(card->shortname, dev->product_name, sizeof(card->shortname));
+	strlcpy(card->mixername, dev->product_name, sizeof(card->mixername));
+
+	/* if the id was not passed as module option, fill it with a shortened
+	 * version of the product string which does not contain any
+	 * whitespaces */
+
+	if (*card->id == '\0') {
+		char id[sizeof(card->id)];
+
+		memset(id, 0, sizeof(id));
+
+		for (c = card->shortname, len = 0;
+			*c && len < sizeof(card->id); c++)
+			if (*c != ' ')
+				id[len++] = *c;
+
+		snd_card_set_id(card, id);
+	}
+
+	usb_make_path(usb_dev, usbpath, sizeof(usbpath));
+	snprintf(card->longname, sizeof(card->longname),
+		       "%s %s (%s)",
+		       dev->vendor_name, dev->product_name, usbpath);
+
 	setup_card(dev);
 	return 0;
 }
 
-static int __devinit snd_probe(struct usb_interface *intf, 
+static int __devinit snd_probe(struct usb_interface *intf,
 		     const struct usb_device_id *id)
 {
 	int ret;
 	struct snd_card *card;
 	struct usb_device *device = interface_to_usbdev(intf);
-	
+
 	ret = create_card(device, &card);
-	
+
 	if (ret < 0)
 		return ret;
-			
+
 	usb_set_intfdata(intf, card);
 	ret = init_card(caiaqdev(card));
 	if (ret < 0) {
@@ -468,7 +473,7 @@ static int __devinit snd_probe(struct usb_interface *intf,
 		snd_card_free(card);
 		return ret;
 	}
-	
+
 	return 0;
 }
 
@@ -489,10 +494,10 @@ static void snd_disconnect(struct usb_interface *intf)
 	snd_usb_caiaq_input_free(dev);
 #endif
 	snd_usb_caiaq_audio_free(dev);
-	
+
 	usb_kill_urb(&dev->ep1_in_urb);
 	usb_kill_urb(&dev->midi_out_urb);
-	
+
 	snd_card_free(card);
 	usb_reset_device(interface_to_usbdev(intf));
 }
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index 4cce1ad7493..ece73514854 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -81,7 +81,6 @@ struct snd_usb_caiaqdev {
 
 	char vendor_name[CAIAQ_USB_STR_LEN];
 	char product_name[CAIAQ_USB_STR_LEN];
-	char serial[CAIAQ_USB_STR_LEN];
 
 	int n_streams, n_audio_in, n_audio_out;
 	int streaming, first_packet, output_running;
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 8fa8cd88d76..538e8c00d31 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -40,7 +40,7 @@ static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *subst
 
 	if (!dev)
 		return;
-	
+
 	dev->midi_receive_substream = up ? substream : NULL;
 }
 
@@ -64,18 +64,18 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
 				    struct snd_rawmidi_substream *substream)
 {
 	int len, ret;
-	
+
 	dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
 	dev->midi_out_buf[1] = 0; /* port */
 	len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
 				   EP1_BUFSIZE - 3);
-	
+
 	if (len <= 0)
 		return;
-	
+
 	dev->midi_out_buf[2] = len;
 	dev->midi_out_urb.transfer_buffer_length = len+3;
-	
+
 	ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
 	if (ret < 0)
 		log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
@@ -88,7 +88,7 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
 static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
 {
 	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
-	
+
 	if (up) {
 		dev->midi_out_substream = substream;
 		if (!dev->midi_out_active)
@@ -113,12 +113,12 @@ static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
 	.trigger =      snd_usb_caiaq_midi_input_trigger,
 };
 
-void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, 
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
 				     int port, const char *buf, int len)
 {
 	if (!dev->midi_receive_substream)
 		return;
-	
+
 	snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
 }
 
@@ -142,16 +142,16 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
 
 	if (device->spec.num_midi_out > 0) {
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
-		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, 
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
 				    &snd_usb_caiaq_midi_output);
 	}
 
 	if (device->spec.num_midi_in > 0) {
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
-		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, 
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
 				    &snd_usb_caiaq_midi_input);
 	}
-	
+
 	device->rmidi = rmidi;
 
 	return 0;
@@ -160,7 +160,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
 void snd_usb_caiaq_midi_output_done(struct urb* urb)
 {
 	struct snd_usb_caiaqdev *dev = urb->context;
-	
+
 	dev->midi_out_active = 0;
 	if (urb->status != 0)
 		return;
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index a6b88482637..c7b902358b7 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -627,6 +627,7 @@ static int prepare_playback_urb(struct snd_usb_substream *subs,
 	subs->hwptr_done += offs;
 	if (subs->hwptr_done >= runtime->buffer_size)
 		subs->hwptr_done -= runtime->buffer_size;
+	runtime->delay += offs;
 	spin_unlock_irqrestore(&subs->lock, flags);
 	urb->transfer_buffer_length = offs * stride;
 	if (period_elapsed)
@@ -636,12 +637,22 @@ static int prepare_playback_urb(struct snd_usb_substream *subs,
 
 /*
  * process after playback data complete
- * - nothing to do
+ * - decrease the delay count again
  */
 static int retire_playback_urb(struct snd_usb_substream *subs,
 			       struct snd_pcm_runtime *runtime,
 			       struct urb *urb)
 {
+	unsigned long flags;
+	int stride = runtime->frame_bits >> 3;
+	int processed = urb->transfer_buffer_length / stride;
+
+	spin_lock_irqsave(&subs->lock, flags);
+	if (processed > runtime->delay)
+		runtime->delay = 0;
+	else
+		runtime->delay -= processed;
+	spin_unlock_irqrestore(&subs->lock, flags);
 	return 0;
 }
 
@@ -1520,6 +1531,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
 	subs->hwptr_done = 0;
 	subs->transfer_done = 0;
 	subs->phase = 0;
+	runtime->delay = 0;
 
 	/* clear urbs (to be sure) */
 	deactivate_urbs(subs, 0, 1);
@@ -3279,6 +3291,25 @@ static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
 	return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
 }
 
+/*
+ * C-Media CM6206 is based on CM106 with two additional
+ * registers that are not documented in the data sheet.
+ * Values here are chosen based on sniffing USB traffic
+ * under Windows.
+ */
+static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
+{
+	int err, reg;
+	int val[] = {0x200c, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
+
+	for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
+		err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
+		if (err < 0)
+			return err;
+	}
+
+	return err;
+}
 
 /*
  * Setup quirks
@@ -3565,6 +3596,12 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
 			goto __err_val;
 	}
 
+	/* C-Media CM6206 / CM106-Like Sound Device */
+	if (id == USB_ID(0x0d8c, 0x0102)) {
+		if (snd_usb_cm6206_boot_quirk(dev) < 0)
+			goto __err_val;
+	}
+
 	/*
 	 * found a config.  now register to ALSA
 	 */
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ecb58e7a624..4bd3a7a0edc 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -423,7 +423,7 @@ static int set_ctl_value(struct usb_mixer_elem_info *cval, int request, int vali
 	value_set = convert_bytes_value(cval, value_set);
 	buf[0] = value_set & 0xff;
 	buf[1] = (value_set >> 8) & 0xff;
-	while (timeout -- > 0)
+	while (timeout-- > 0)
 		if (snd_usb_ctl_msg(cval->mixer->chip->dev,
 				    usb_sndctrlpipe(cval->mixer->chip->dev, 0),
 				    request,
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 5d955aaad85..f6f201eb24c 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1470,6 +1470,41 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
+	/* Edirol M-16DX */
+	/* FIXME: This quirk gives a good-working capture stream but the
+	 *        playback seems problematic because of lacking of sync
+	 *        with capture stream.  It needs to sync with the capture
+	 *        clock.  As now, you'll get frequent sound distortions
+	 *        via the playback.
+	 */
+	USB_DEVICE(0x0582, 0x00c4),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+{
 	/* BOSS GT-10 */
 	USB_DEVICE(0x0582, 0x00da),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
@@ -1951,6 +1986,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
+	USB_DEVICE(0x0ccd, 0x0028),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "TerraTec",
+		.product_name = "Aureon5.1MkII",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
+{
 	USB_DEVICE(0x0ccd, 0x0035),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Miditech",
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 29259e74dcf..0f5771f615d 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -568,8 +568,11 @@ int cmd_record(int argc, const char **argv, const char *prefix)
 	if (!argc && target_pid == -1 && !system_wide)
 		usage_with_options(record_usage, options);
 
-	if (!nr_counters)
-		nr_counters = 1;
+	if (!nr_counters) {
+		nr_counters	= 1;
+		attrs[0].type	= PERF_TYPE_HARDWARE;
+		attrs[0].config = PERF_COUNT_HW_CPU_CYCLES;
+	}
 
 	for (counter = 0; counter < nr_counters; counter++) {
 		if (attrs[counter].sample_period)
diff --git a/tools/perf/design.txt b/tools/perf/design.txt
index 860e116d979..f71e0d245cb 100644
--- a/tools/perf/design.txt
+++ b/tools/perf/design.txt
@@ -440,3 +440,18 @@ by this process or by another, and doesn't affect any counters that
 this process has created on other processes.  It only enables or
 disables the group leaders, not any other members in the groups.
 
+
+Arch requirements
+-----------------
+
+If your architecture does not have hardware performance metrics, you can
+still use the generic software counters based on hrtimers for sampling.
+
+So to start with, in order to add HAVE_PERF_COUNTERS to your Kconfig, you
+will need at least this:
+	- asm/perf_counter.h - a basic stub will suffice at first
+	- support for atomic64 types (and associated helper functions)
+	- set_perf_counter_pending() implemented
+
+If your architecture does have hardware capabilities, you can override the
+weak stub hw_perf_counter_init() to register hardware counters.
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index af0a5046d74..87a1aca4a42 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -53,11 +53,12 @@ static inline unsigned long long rdclock(void)
 	_min1 < _min2 ? _min1 : _min2; })
 
 static inline int
-sys_perf_counter_open(struct perf_counter_attr *attr_uptr,
+sys_perf_counter_open(struct perf_counter_attr *attr,
 		      pid_t pid, int cpu, int group_fd,
 		      unsigned long flags)
 {
-	return syscall(__NR_perf_counter_open, attr_uptr, pid, cpu,
+	attr->size = sizeof(*attr);
+	return syscall(__NR_perf_counter_open, attr, pid, cpu,
 		       group_fd, flags);
 }
 
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 9d5f1ca50e6..5a72586e1df 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -75,7 +75,7 @@ static char *sw_event_names[] = {
 #define MAX_ALIASES 8
 
 static char *hw_cache [][MAX_ALIASES] = {
-	{ "L1-data"		, "l1-d", "l1d", "l1"				},
+	{ "L1-data"		, "l1-d", "l1d"					},
 	{ "L1-instruction"	, "l1-i", "l1i"					},
 	{ "L2"			, "l2"						},
 	{ "Data-TLB"		, "dtlb", "d-tlb"				},
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index e21194566b7..764554350ed 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2604,7 +2604,6 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
 		r = -ENOMEM;
 		goto out_free_0;
 	}
-	cpumask_clear(cpus_hardware_enabled);
 
 	r = kvm_arch_hardware_setup();
 	if (r < 0)